Science.gov

Sample records for neuro-oncology feasibility study

  1. 2010 Society for Neuro-Oncology Annual Meeting: a report of selected studies.

    PubMed

    Ahluwalia, Manmeet S

    2011-02-01

    A number of important studies were presented at the Society for Neuro-Oncology annual meeting in Montréal, Canada, on 18-21 November 2010. Cediranib as monotherapy or in combination with lomustine did not show increased efficacy when compared with lomustine alone in patients with recurrent glioblastoma (GBM). Addition of temozolomide (TMZ) or irinotecan (CPT) to bevacizumab (BEV) in patients with recurrent GBM was well tolerated, with similar efficacy to BEV alone. The addition of BEV to radiation and TMZ in newly diagnosed GBM improved progression-free survival but did not improve overall survival. TMZ alone may be a reasonable approach in elderly GBM patients with poor performance status. Two Phase II trials with sunitinib and vatalanib showed a hint of activity in patients with recurrent or progressive meningiomas. PMID:21342033

  2. Updates from the 2013 Society for Neuro-Oncology annual and World Federation for Neuro-Oncology quadrennial meeting.

    PubMed

    Lukas, Rimas V; Amidei, Christina

    2014-01-01

    We present an overview of a number of key clinical studies in infiltrating gliomas presented at the 2013 Society for Neuro-Oncology and World Federation of Neuro-Oncology joint meeting. This review focuses on efficacy results, including quality of life studies, from larger clinical trials in both high- and low-grade infiltrating gliomas.

  3. Immunotherapy response assessment in neuro-oncology: a report of the RANO working group.

    PubMed

    Okada, Hideho; Weller, Michael; Huang, Raymond; Finocchiaro, Gaetano; Gilbert, Mark R; Wick, Wolfgang; Ellingson, Benjamin M; Hashimoto, Naoya; Pollack, Ian F; Brandes, Alba A; Franceschi, Enrico; Herold-Mende, Christel; Nayak, Lakshmi; Panigrahy, Ashok; Pope, Whitney B; Prins, Robert; Sampson, John H; Wen, Patrick Y; Reardon, David A

    2015-11-01

    Immunotherapy is a promising area of therapy in patients with neuro-oncological malignancies. However, early-phase studies show unique challenges associated with the assessment of radiological changes in response to immunotherapy reflecting delayed responses or therapy-induced inflammation. Clinical benefit, including long-term survival and tumour regression, can still occur after initial disease progression or after the appearance of new lesions. Refinement of the response assessment criteria for patients with neuro-oncological malignancies undergoing immunotherapy is therefore warranted. Herein, a multinational and multidisciplinary panel of neuro-oncology immunotherapy experts describe immunotherapy Response Assessment for Neuro-Oncology (iRANO) criteria based on guidance for the determination of tumour progression outlined by the immune-related response criteria and the RANO working group. Among patients who demonstrate imaging findings meeting RANO criteria for progressive disease within 6 months of initiating immunotherapy, including the development of new lesions, confirmation of radiographic progression on follow-up imaging is recommended provided that the patient is not significantly worse clinically. The proposed criteria also include guidelines for the use of corticosteroids. We review the role of advanced imaging techniques and the role of measurement of clinical benefit endpoints including neurological and immunological functions. The iRANO guidelines put forth in this Review will evolve successively to improve their usefulness as further experience from immunotherapy trials in neuro-oncology accumulate.

  4. Development of an Integrated Subspecialist Multidisciplinary Neuro-oncology Service.

    PubMed

    Price, Stephen J; Guilfoyle, Mathew; J Jefferies, Sarah; Harris, Fiona; Oberg, Ingela; G Burnet, Neil; Santarius, Thomas; Watts, Colin

    2013-01-01

    Traditionally, the poor outcome for patients with malignant brain tumours led to therapeutic nihilism. In turn, this resulted in lack of interest in neurosurgical oncology subspecialisation, and less than ideal patient pathways. One problem of concern was the low rate of tumour resection. Between 1997 and 2006, 685 treated glioblastomas were identified. In the first four years only 40% of patients underwent tumour resection, rising to 55% in the last four years. Before revision of the pathway, the median length of hospital stay was 8 days, and 35% of patients received the results of their histology outside of a clinic setting. A pathway of care was established, in which all patients were discussed pre-operatively in an MDT meeting and then directed into a new surgical neuro-oncology clinic providing first point of contact. This limited the number of surgeons operating on adult glioma patients and aided recruitment into research studies. Now, three consultant neurosurgeons run this service, easily fulfilling IOG requirement to spend >50% of programmed activities in neuro-oncology. Nursing support has been critical to provide an integrated service. This model has allowed increased recruitment to clinical trials. The introduction of this service led to an increase in patients discussed pre-operatively in an MDT (66% rising to 87%; P=0.027), an increase in the rate of surgical resection (from 40% to 80%) and more patients being admitted electively (from 25% to 80%; P<0.001). There was a reduction in the median length of stay (8 days reduced to 4.5 days; P<0.001). For the cohort of GBM patients that went on to have chemoradiotherapy we improved median survival to 18 months, with 35% of patients alive at two years, comparable to international outcomes. Implementing a specialist neurosurgical oncology service begins with understanding the patient care pathway. Our patients have benefitted from the culture of subspecialisation and the excellent inter-disciplinary working

  5. NEURO-ONCOLOGIC PHYSICAL THERAPY FOR THE OLDER PERSON.

    PubMed

    Ching, Willie; Luhmann, Melissa

    2011-07-01

    Due to the uncertainty of the course of diagnoses, patients with neuro-oncological malignancies present challenges to the physical therapist. At times, the presentation of impairments and disabilities of these patients with neuro-oncological diagnoses do not necessarily coincide with the involved area of the brain or spinal cord. It is our intention to provide guidance to the physical therapist who will be working with these patients with neuro-oncological diagnoses, in hopes that their encounters will be more productive and meaningful. This article describes a brief overview of common central nervous system malignancies, its medical treatment, as well as possible complications and side effects that would need to be considered in rehabilitating these patients. Special consideration is given to the elderly patients with neuro-oncological diagnoses. Pertinent physical therapy assessments and interventions are discussed.

  6. Society for Neuro-Oncology 2014 annual meeting updates on central nervous system metastases

    PubMed Central

    Lukas, Rimas V.; Mehta, Minesh P.; Lesniak, Maciej S.

    2015-01-01

    Introduction The 19th Annual Meeting of the Society for Neuro-Oncology (SNO) took place in November of 2014. The focus of many abstracts, as well as the Education Day, was on recent advances in the study of central nervous system (CNS) metastases. Tumor Biology Key studies evaluating the factors in tumors and their microenvironment associated with the development and growth of brain metastases are reviewed. Prognostication Studies investigating the factors that independently influence survival in participants with brain metastases are presented. Response Assessment The Response Assessment for Neuro-Oncology criteria for brain metastases (RANO-BM) and the Neurological Assessment in Neuro-Oncology (NANO) criteria, which were both presented, are recapped. Radiotherapy Studies are reviewed evaluating factors that influence survival outcomes in participants with brain metastases who were treated with radiotherapy. Studies investigating the potential risk of radiation necrosis with the combination of radiotherapy and immunotherapies are presented. Systemic Therapies Brain metastases-focused subset analyses from the ASCEND-1 trial for ALK-translocated non–small cell lung cancer are presented. Preclinical and clinical work on solid tumor leptomeningeal carcinomatosis is also covered. Sequelae of Central Nervous System Metastases and Their Treatments An overview is provided of treatment- related toxicities as well as important concepts that may influence strategies to protect against these toxicities. Conclusions Key concepts regarding tumor biology, prognostication, response assessment, therapeutic management, and sequelae of treatment for CNS metastases are summarized. Advances in our understanding of the basic and clinical science of CNS metastases have the potential to improve outcomes for patients.

  7. Society for Neuro-Oncology 2014 annual meeting updates on central nervous system metastases

    PubMed Central

    Lukas, Rimas V.; Mehta, Minesh P.; Lesniak, Maciej S.

    2015-01-01

    Introduction The 19th Annual Meeting of the Society for Neuro-Oncology (SNO) took place in November of 2014. The focus of many abstracts, as well as the Education Day, was on recent advances in the study of central nervous system (CNS) metastases. Tumor Biology Key studies evaluating the factors in tumors and their microenvironment associated with the development and growth of brain metastases are reviewed. Prognostication Studies investigating the factors that independently influence survival in participants with brain metastases are presented. Response Assessment The Response Assessment for Neuro-Oncology criteria for brain metastases (RANO-BM) and the Neurological Assessment in Neuro-Oncology (NANO) criteria, which were both presented, are recapped. Radiotherapy Studies are reviewed evaluating factors that influence survival outcomes in participants with brain metastases who were treated with radiotherapy. Studies investigating the potential risk of radiation necrosis with the combination of radiotherapy and immunotherapies are presented. Systemic Therapies Brain metastases-focused subset analyses from the ASCEND-1 trial for ALK-translocated non–small cell lung cancer are presented. Preclinical and clinical work on solid tumor leptomeningeal carcinomatosis is also covered. Sequelae of Central Nervous System Metastases and Their Treatments An overview is provided of treatment- related toxicities as well as important concepts that may influence strategies to protect against these toxicities. Conclusions Key concepts regarding tumor biology, prognostication, response assessment, therapeutic management, and sequelae of treatment for CNS metastases are summarized. Advances in our understanding of the basic and clinical science of CNS metastases have the potential to improve outcomes for patients. PMID:27621837

  8. Industry progress report on neuro-oncology: a biotech update.

    PubMed

    Haber, Jessica S; Banu, Matei A; Ray, Ashley; Kesavabhotla, Kartik; Boockvar, John A

    2013-04-01

    With steadily rising revenue and large numbers of clinical trials utilizing novel treatment strategies, the field of neuro-oncology is at the core of the growing cancer therapy industry. In June 2012, the Weill Cornell Brain and Tumor Center hosted the first Brain Tumor Biotech Summit as a forum for fostering and encouraging collaboration between researches and investors to accelerate novel treatments for brain cancer. This event brought together neuro-oncologists, neurosurgeons, academicians, entrepreneurs, non-profits, CEOs and investors in an attempt to bring innovative treatments and concepts to the fore. Specific subjects presented at the meeting included new surgical devices and delivery techniques, targeted therapeutics, immunotherapy, and stem cell biology. The mission of the summit was to provide opportunities for researchers in neuro-oncology to directly interact with leaders from the investment community with insight into the commercial aspects of our work. Our shared goal is to shorten the time for basic science ideas to be translated into the clinical setting. The following serves as a progress report on the biotech industry in neuro-oncology, as presented at the Brain Tumor Biotech Summit. PMID:23423513

  9. Industry progress report on neuro-oncology: a biotech update.

    PubMed

    Haber, Jessica S; Banu, Matei A; Ray, Ashley; Kesavabhotla, Kartik; Boockvar, John A

    2013-04-01

    With steadily rising revenue and large numbers of clinical trials utilizing novel treatment strategies, the field of neuro-oncology is at the core of the growing cancer therapy industry. In June 2012, the Weill Cornell Brain and Tumor Center hosted the first Brain Tumor Biotech Summit as a forum for fostering and encouraging collaboration between researches and investors to accelerate novel treatments for brain cancer. This event brought together neuro-oncologists, neurosurgeons, academicians, entrepreneurs, non-profits, CEOs and investors in an attempt to bring innovative treatments and concepts to the fore. Specific subjects presented at the meeting included new surgical devices and delivery techniques, targeted therapeutics, immunotherapy, and stem cell biology. The mission of the summit was to provide opportunities for researchers in neuro-oncology to directly interact with leaders from the investment community with insight into the commercial aspects of our work. Our shared goal is to shorten the time for basic science ideas to be translated into the clinical setting. The following serves as a progress report on the biotech industry in neuro-oncology, as presented at the Brain Tumor Biotech Summit.

  10. Neuro-oncology: a selected review of ASCO 2016 abstracts.

    PubMed

    Chamberlain, Marc C

    2016-10-01

    ASCO 2016, 29 May-2 June 2016, Chicago, IL, USA The largest annual clinical oncology conference the American Society of Clinical Oncology is held in the USA and gives researchers and other key opinion leaders the opportunity to present new cancer clinical trials and research data. The CNS tumors section of the American Society of Clinical Oncology 2016 covered various aspects of neuro-oncology including metastatic CNS diseases and primary brain tumors, presented via posters, oral talks and over 100 abstracts. This brief review selectively highlights presentations from this meeting in an organizational manner that reflects clinically relevant aspects of a large and multifaceted meeting. PMID:27616612

  11. Neuro-oncology: a selected review of ASCO 2016 abstracts.

    PubMed

    Chamberlain, Marc C

    2016-10-01

    ASCO 2016, 29 May-2 June 2016, Chicago, IL, USA The largest annual clinical oncology conference the American Society of Clinical Oncology is held in the USA and gives researchers and other key opinion leaders the opportunity to present new cancer clinical trials and research data. The CNS tumors section of the American Society of Clinical Oncology 2016 covered various aspects of neuro-oncology including metastatic CNS diseases and primary brain tumors, presented via posters, oral talks and over 100 abstracts. This brief review selectively highlights presentations from this meeting in an organizational manner that reflects clinically relevant aspects of a large and multifaceted meeting.

  12. [Current concepts in Neuro-Oncology].

    PubMed

    Hofer, S

    2012-10-01

    Over the last decade, understanding of gliomas on a molecular level has greatly expanded This update briefly reviews the potential utility of molecular markers in refining diagnosis, prognosis, and treatment decisions, focussing on 1p/19q co-deletion, MGMT promoter methylation, EGFR mutations, and IDH 1/2 mutation. In the past, clinicians relied primarily on clinical factors such as age, Karnofsky performance status and extent of resection to inform prognosis. These para-meters and others have been used to identify prognostically distinct classes using recursive partitioning analysis (RPA) for patients with anaplastic astrocytomas and glioblastomas. They have been proven useful and were validated by subsequent glioma trials both at dia-gnosis and recurrence. Today clinical trials incorporate molecular information, either as stratification factors to balance treatment arms in randomized studies, or as eligibility criteria. Currently two markers are recommended to guide a clinician in deciding treatment: LOH 1p 19q in WHO III glioma defines a subgroup which should be treated with postoperative chemotherapy and radiation therapy and the methylation of the MGMT gene promoter is predictive for chemotherapy in elderly patients with a glioblastoma. Neuroimaging as the basic tool to diagnose a glioma and monitor treatment response during the course of the disease has markedly evolved. Conventional T1 sequences with and without contrast and T2/FLAIR sequences still remain the gold standard to delineate a new lesion and inform about criteria of malignancy. During treatment, advanced MRI techniques and PET imaging are being incorporated and explored to reflect metabolic activity of a lesion. PMID:23026886

  13. [Hedgehog signaling in the pathogenesis of neuro-oncology diseases].

    PubMed

    Cherepanov, S A; Baklaushev, V P; Gabashvili, A N; Shepeleva, I I; Chekhonin, V P

    2015-01-01

    The review summarizes current knowledge on the Hedgehog signaling pathway, its role in normal embryogenesis and/or initiation and progression of neuro-oncological diseases, especially of high-grade gliomas, the most malignant neuroepithelial tumors. The main proteins forming the Hedgehog signaling pathway include Shh, PTCH1, SMO, HHIP, SUFU and GLI1 isoforms. Effects of other signaling pathways on the family of transcription factors GLI and other proteins are described. The review summarizes modern data about the impact of the Hedgehog signaling pathway on proliferation, migration activity and invasiveness, and also on tumor neoangiogenesis and tumor cell chemoresistance. The role of the Hedgehog signaling pathway in origin of cancer stem cells and epithelial-mesenchymal transition is also analyzed. Some prospects for new anticancer drugs acting on components of the Hedgehog signaling pathway inhibitors are demonstrated. PMID:26215410

  14. Randomized controlled trials and neuro-oncology: should alternative designs be considered?

    PubMed

    Mansouri, Alireza; Shin, Samuel; Cooper, Benjamin; Srivastava, Archita; Bhandari, Mohit; Kondziolka, Douglas

    2015-09-01

    Deficiencies in design and reporting of randomized controlled trials (RCTs) hinders interpretability and critical appraisal. The reporting quality of recent RCTs in neuro-oncology was analyzed to assess adequacy of design and reporting. The MEDLINE and EMBASE databases were searched to identify non-surgical RCTs (years 2005-2014, inclusive). The CONSORT and Jadad scales were used to assess the quality of design/reporting. Studies published in 2005-2010 were compared as a cohort against studies published in 2011-2014, in terms of general characteristics and reporting quality. A PRECIS-based scale was used to designate studies on the pragmatic-explanatory continuum. Spearman's test was used to assess correlations. Regression analysis was used to assess associations. Overall 68 RCTs were identified. Studies were often chemotherapy-based (n = 41 studies) focusing upon high grade gliomas (46 %) and metastases (41 %) as the top pathologies. Multi-center trials (71 %) were frequent. The overall median CONSORT and Jadad scores were 34.5 (maximum 44) and 2 (maximum 5), respectively; these scores were similar in radiation and chemotherapy-based trials. Major areas of deficiency pertained to allocation concealment, implementation of methods, and blinding whereby less than 20 % of articles fulfilled all criteria. Description of intervention, random sequence generation, and the details regarding recruitment were also deficient; less than 50 % of studies fulfilled all criteria. Description of sample size calculations and blinding improved in later published cohorts. Journal impact factor was significantly associated with higher quality (p = 0.04). Large academic consortia, multi-center designs, ITT analysis, collaboration with biostatisticians, larger sample sizes, and studies with pragmatic objectives were more likely to achieve positive primary outcomes on univariate analysis; none of these variables were significant on multivariate analysis. Deficiencies in the

  15. The Potential Role of Exercise in Neuro-Oncology

    PubMed Central

    Cormie, Prue; Nowak, Anna K.; Chambers, Suzanne K.; Galvão, Daniel A.; Newton, Robert U.

    2015-01-01

    Patients with brain and other central nervous system cancers experience debilitating physical, cognitive, and emotional effects, which significantly compromise quality of life. Few efficacious pharmacological strategies or supportive care interventions exist to ameliorate these sequelae and patients report high levels of unmet needs in these areas. There is strong theoretical rationale to suggest exercise may be an effective intervention to aid in the management of neuro-oncological disorders. Clinical research has established the efficacy of appropriate exercise in counteracting physical impairments such as fatigue and functional decline, cognitive impairment, as well as psychological effects including depression and anxiety. While there is promise for exercise to enhance physical and psychosocial wellbeing of patients diagnosed with neurologic malignancies, these patients have unique needs and research is urgently required to explore optimal exercise prescription specific to these patients to maximize safety and efficacy. This perspective article is a discussion of potential rehabilitative effects of targeted exercise programs for patients with brain and other central nervous system cancers and highlights future research directions. PMID:25905043

  16. Glycemic modulation in neuro-oncology: experience and future directions using a modified Atkins diet for high-grade brain tumors

    PubMed Central

    Strowd, Roy E.; Cervenka, Mackenzie C.; Henry, Bobbie J.; Kossoff, Eric H.; Hartman, Adam L.; Blakeley, Jaishri O.

    2015-01-01

    Dietary glycemic modulation through high-fat, low-carbohydrate diets, which induce a state of systemic ketosis and alter systemic metabolic signaling, have been incorporated into the clinical management of patients with neurological disease for more than a century. Mounting preclinical evidence supports the antitumor, proapoptotic, and antiangiogenic effects of disrupting glycolytic metabolism through dietary intervention. In recent years, interest in incorporating such novel therapeutic strategies in neuro-oncology has increased. To date, 3 published studies incorporating novel dietary therapies in oncology have been reported, including one phase I study in neuro-oncology, and have set the stage for further study in this field. In this article, we review the biochemical pathways, preclinical data, and early clinical translation of dietary interventions that modulate systemic glycolytic metabolism in the management of primary malignant brain tumors. We introduce the modified Atkins diet (MAD), a novel dietary alternative to the classic ketogenic diet, and discuss the critical issues facing future study. PMID:26649186

  17. Clinical PET/MR Imaging in Dementia and Neuro-Oncology.

    PubMed

    Henriksen, Otto M; Marner, Lisbeth; Law, Ian

    2016-10-01

    The introduction of hybrid PET/MRI systems allows simultaneous multimodality image acquisition of high technical quality. This technique is well suited for the brain, and particularly in dementia and neuro-oncology. In routine use combinations of well-established MRI sequences and PET tracers provide the most optimal and clinically valuable protocols. For dementia the [18F]-fluorodeoxyglucose (FDG) has merit with a simultaneous four sequence MRI protocol of 20 min supported by supplementary statistical reading tools and quantitative measurements of the hippocampal volume. Clinical PET/MRI using [18F]-fluoro-ethyl-tyrosine (FET) also abide to the expectations of the adaptive and versatile diagnostic tool necessary in neuro-oncology covering both simple 20 min protocols for routine treatment surveillance and complicated 90 min brain and spinal cord protocols in pediatric neuro-oncology under general anesthesia. The clinical value of adding advanced MRI sequences in multiparametric imaging setting, however, is still undocumented. PMID:27593248

  18. Mass Spectrometry Strategies for Clinical Metabolomics and Lipidomics in Psychiatry, Neurology, and Neuro-Oncology

    PubMed Central

    Wood, Paul L

    2014-01-01

    Metabolomics research has the potential to provide biomarkers for the detection of disease, for subtyping complex disease populations, for monitoring disease progression and therapy, and for defining new molecular targets for therapeutic intervention. These potentials are far from being realized because of a number of technical, conceptual, financial, and bioinformatics issues. Mass spectrometry provides analytical platforms that address the technical barriers to success in metabolomics research; however, the limited commercial availability of analytical and stable isotope standards has created a bottleneck for the absolute quantitation of a number of metabolites. Conceptual and financial factors contribute to the generation of statistically under-powered clinical studies, whereas bioinformatics issues result in the publication of a large number of unidentified metabolites. The path forward in this field involves targeted metabolomics analyses of large control and patient populations to define both the normal range of a defined metabolite and the potential heterogeneity (eg, bimodal) in complex patient populations. This approach requires that metabolomics research groups, in addition to developing a number of analytical platforms, build sufficient chemistry resources to supply the analytical standards required for absolute metabolite quantitation. Examples of metabolomics evaluations of sulfur amino-acid metabolism in psychiatry, neurology, and neuro-oncology and of lipidomics in neurology will be reviewed. PMID:23842599

  19. From Patient-Specific Mathematical Neuro-Oncology to Precision Medicine

    PubMed Central

    Baldock, A. L.; Rockne, R. C.; Boone, A. D.; Neal, M. L.; Hawkins-Daarud, A.; Corwin, D. M.; Bridge, C. A.; Guyman, L. A.; Trister, A. D.; Mrugala, M. M.; Rockhill, J. K.; Swanson, K. R.

    2013-01-01

    Gliomas are notoriously aggressive, malignant brain tumors that have variable response to treatment. These patients often have poor prognosis, informed primarily by histopathology. Mathematical neuro-oncology (MNO) is a young and burgeoning field that leverages mathematical models to predict and quantify response to therapies. These mathematical models can form the basis of modern “precision medicine” approaches to tailor therapy in a patient-specific manner. Patient-specific models (PSMs) can be used to overcome imaging limitations, improve prognostic predictions, stratify patients, and assess treatment response in silico. The information gleaned from such models can aid in the construction and efficacy of clinical trials and treatment protocols, accelerating the pace of clinical research in the war on cancer. This review focuses on the growing translation of PSM to clinical neuro-oncology. It will also provide a forward-looking view on a new era of patient-specific MNO. PMID:23565501

  20. Phase 2 trial design in neuro-oncology revisited: a report from the RANO group.

    PubMed

    Galanis, Evanthia; Wu, Wenting; Cloughesy, Timothy; Lamborn, Kathleen; Mann, Bhupinder; Wen, Patrick Y; Reardon, David A; Wick, Wolfgang; Macdonald, David; Armstrong, Terri S; Weller, Michael; Vogelbaum, Michael; Colman, Howard; Sargent, Daniel J; van den Bent, Martin J; Gilbert, Mark; Chang, Susan

    2012-05-01

    Advances in the management of gliomas, including the approval of agents such as temozolomide and bevacizumab, have created an evolving therapeutic landscape in glioma treatment, thus affecting our ability to reliably use historical controls to comparatively assess the activity of new therapies. Furthermore, the increasing availability of novel, targeted agents--which are competing for a small patient population, in view of the low incidence of primary brain tumours--draws attention to the need to improve the efficiency of phase 2 clinical testing in neuro-oncology to expeditiously transition the most promising of these drugs or combinations to potentially practice-changing phase 3 trials. In this report from the Response Assessment in Neurooncology (RANO) group, we review phase 2 trial designs that can address these challenges and capitalise on scientific and clinical advances in brain tumour treatment in neuro-oncology to accelerate and optimise the selection of drugs deserving further testing in phase 3 trials. Although there is still a small role for single-arm and non-comparative phase 2 designs, emphasis is placed on the potential role that comparative randomised phase 2 designs--such as screening designs, selection designs, discontinuation designs, and adaptive designs, including seamless phase 2/3 designs--can have. The rational incorporation of these designs, as determined by the specific clinical setting and the trial's endpoints or goals, has the potential to substantially advance new drug development in neuro-oncology.

  1. MRI-guided laser interstitial thermal therapy in neuro-oncology: a review of its current clinical applications.

    PubMed

    Rahmathulla, Gazanfar; Recinos, Pablo F; Kamian, Kambiz; Mohammadi, Alireza M; Ahluwalia, Manmeet S; Barnett, Gene H

    2014-01-01

    Magnetic resonance imaging-guided laser interstitial thermal therapy (LITT) is a minimally invasive treatment modality with recent increasing use to ablate brain tumors. When originally introduced in the late 1980s, the inability to precisely monitor and control the thermal ablation limited the adoption of LITT in neuro-oncology. Popularized as a means of destroying malignant hepatic and renal metastatic lesions percutaneously, its selective thermal tumor destruction and preservation of adjacent normal tissues have since been optimized for use in neuro-oncology. The progress made in real-time thermal imaging with MRI, laser probe design, and computer algorithms predictive of tissue kill has led to the resurgence of interest in LITT as a means to ablate brain tumors. Current LITT systems offer a surgical option for some inoperable brain tumors. We discuss the origins, principles, current indications, and future directions of MRI-guided LITT in neuro-oncology.

  2. Updates from the Neuro-Oncology Section of the 2015 American Neurological Association Annual Meeting

    PubMed Central

    Lukas, Rimas V; Wainwright, Derek A; Laterra, John J

    2016-01-01

    The American Neurological Association (ANA) held its annual meeting in Chicago, IL, USA on 27–29 September 2015. The Scientific Programming Advisory Committee was chaired by Dr S Pleasure from the University of California-San Francisco (CA, USA). The Neuro-Oncology session, chaired by Dr A Pruitt from the University of Pennsylvania (PA, USA) and cochaired by Dr J Laterra from Johns Hopkins University (MD, USA), was held on 27 September 2015. Speakers included Dr D Wainwright (Northwestern University, IL, USA), Dr N Kolb (University of Utah, UT, USA), Dr A Nath (NINDS/NIH, MD, USA), Dr D Franz (Cincinnati Children's Hospital, OH, USA) and Dr R Lukas (University of Chicago, IL, USA). A summary of key presentations from the Neuro-Oncology section of the 2015 American Neurological Association annual meeting is reported. Preclinical and clinical advances in the use of immunotherapies for the treatment of primary and metastatic CNS tumors are covered. Particular attention is paid to the enzyme indoleamine dioxygenase and the immune checkpoints CTLA4 and PD1 and their ligands. Specific nervous system toxicities associated with novel immunotherapies are also discussed. The recent success of targeting the mTOR pathway in the neurocutaneous syndrome tuberous sclerosis is detailed. Finally, important early steps in our understanding of the common toxicity of chemotherapy induced neuropathy are reviewed. PMID:26616737

  3. Tools for improving the characterization and visualization of changes in neuro-oncology patients.

    PubMed

    Hsu, William; Taira, Ricky K

    2010-11-13

    Capturing how a patient's medical problems change over time is important for understanding the progression of a disease, its effects, and response to treatment. We describe two prototype tools that are being developed as part of a data processing pipeline for standardizing, structuring, and visualizing problems and findings documented in clinical reports associated with neuro-oncology patients. Given a list of problems and findings identified using a natural language processing (NLP) system, we have created a mapping tool that assigns an observation of a problem to one of nine classes that describe change. The second tool utilizes iconic representations of the nine classes to generate a timeline interface, enabling users to pan, zoom, and filter the data. The result of this preliminary work is an automated approach for understanding and summarizing the evolution of a problem within the patient electronic medical record.

  4. Resecting diffuse low-grade gliomas to the boundaries of brain functions: a new concept in surgical neuro-oncology.

    PubMed

    Duffau, H

    2015-12-01

    The traditional dilemma making surgery for diffuse low-grade gliomas (DLGGs) challenging is underlain by the need to optimize tumor resection in order to significantly increase survival versus the risk of permanent neurological morbidity. Development of neuroimaging led neurosurgeons to achieve tumorectomy according to the oncological limits provided by preoperative or intraoperative structural and metabolic imaging. However, this principle is not coherent, neither with the infiltrative nature of DLGGs nor with the limited resolution of current neuroimaging. Indeed, despite technical advances, MRI still underestimates the actual spatial extent of gliomas, since tumoral cells are present several millimeters to centimeters beyond the area of signal abnormalities. Furthermore, cortical and subcortical structures may be still crucial for brain functions despite their invasion by this diffuse tumoral disease. Finally, the lack of reliability of functional MRI has also been demonstrated. Therefore, to talk about "maximal safe resection" based upon neuroimaging is a non-sense, because oncological MRI does not show the tumor and functional MRI does not show critical neural pathways. This review proposes an original concept in neuro-oncological surgery, i.e. to resect DLGG to the boundaries of brain functions, thanks to intraoperative electrical mapping performed in awake patients. This paradigmatic shift from image-guided resection to functional mapping-guided resection, based upon an accurate study of brain connectomics and neuroplasticity in each patient throughout tumor removal has permitted to solve the classical dilemma, by increasing both survival and quality of life in DLGG patients. With this in mind, brain surgeons should also be neuroscientists.

  5. Immunotherapy for neuro-oncology: the critical rationale for combinatorial therapy.

    PubMed

    Reardon, David A; Gilbert, Mark R; Wick, Wolfgang; Liau, Linda

    2015-11-01

    A successful therapeutic paradigm established historically in oncology involves combining agents with potentially complementary mechanisms of antitumor activity into rationally designed regimens. For example, cocktails of cytotoxic agents, which were carefully designed based on mechanisms of action, dose, and scheduling considerations, have led to dramatic improvements in survival including cures for childhood leukemia, Hodgkin's lymphoma, and several other complex cancers. Outcome for glioblastoma, the most common primary malignant CNS cancer, has been more modest, but nonetheless our current standard of care derives from confirmation that combination therapy surpasses single modality therapy. Immunotherapy has recently come of age for medical oncology with exciting therapeutic benefits achieved by several types of agents including vaccines, adoptive T cells, and immune checkpoint inhibitors against several types of cancers. Nonetheless, most benefits are relatively short, while others are durable but are limited to a minority of treated patients. Critical factors limiting efficacy of immunotherapeutics include insufficient immunogenicity and/or inadequate ability to overcome immunosuppressive factors exploited by tumors. The paradigm of rationally designed combinatorial regimens, originally established by cytotoxic therapy for oncology, may also prove relevant for immunotherapy. Realization of the true therapeutic potential of immunotherapy for medical oncology and neuro-oncology patients may require development of combinatorial regimens that optimize immunogenicity and target tumor adaptive immunosuppressive factors.

  6. Reversible Valproate Induced Pisa Syndrome and Parkinsonism in a Neuro-Oncology Patient with Depression and Epilepsy

    PubMed Central

    Botturi, Andrea; Silvani, Antonio; Pravettoni, Gabriella; Paoli, Riccardo Augusto; Lucchiari, Claudio

    2016-01-01

    Neurological and psychiatric conditions frequently overlap in neuro-oncology. This overlapping negatively affects patients’ quality of life and decreases the ability of providers to manage specific symptoms by therapy modulation, especially when psychopharmacotherapy needs to be prescribed. We describe here a patient with recurrent brain tumor, symptomatic epilepsy and depression who developed Pisa syndrome and parkinsonism after several months of valproic acid use. An accurate recognition of symptoms and treatment side effect allowed an appropriate clinical approach so as to rapidly improve both movement disorder and depression without increasing the risk of developing seizure. This has improved the autonomy and quality of life in a patient with poor prognosis. PMID:27462241

  7. Impact of provider level, training and gender on the utilization of palliative care and hospice in neuro-oncology: a North-American survey.

    PubMed

    Walbert, Tobias; Glantz, Michael; Schultz, Lonni; Puduvalli, Vinay K

    2016-01-01

    Specialized palliative care (PC) services have emerged to address symptoms and provide end-of-life management for patients with brain tumors. The utilization patterns of PC in neuro-oncology are unknown. A 22-question survey was distributed to participants of the society for neuro-oncology annual meeting 2012 (n = 4487). Nonparametric methods including Wilcoxon two-sample and Kruskal-Wallis tests were used to assess differences in responses. 239 (5.3 %) evaluable responses were received; 79 % of respondents were physicians, and 17 % were nurses or midlevel providers. Forty-seven percent were medical or neuro-oncologists, 31 % neurosurgeons and 11 % radiation oncologists. Forty percent had no formal training in PC, 57 % had some formal training and 3 % completed a PC fellowship. Seventy-nine percent practiced in an academic setting. Of the respondents, 57 % referred patients to PC when symptoms required treatment and 18 % at end of life. Only 51 % of all providers felt comfortable dealing with end-of-life issues and symptoms, while 33 % did not. Fifty-one percent preferred a service named "Supportive Care" rather than "Palliative Care" (MDs > midlevel providers, p < 0.001), and 32 % felt that patient expectations for ongoing therapy hindered their ability to make PC referrals. Female gender, formal training in neuro-oncology and PC, and medical versus surgical neuro-oncology training were significantly associated with hospice referral, comfort in dealing with end-of-life issues, and ease of access to PC services. Provider level, specialty, gender, training in PC and neuro-oncology have significant impact on the utilization of PC and hospice in neuro-oncology.

  8. Radiosurgical options in neuro-oncology: a review on current tenets and future opportunities. Part II: adjuvant radiobiological tools.

    PubMed

    Ganau, Mario; Foroni, Roberto Israel; Gerosa, Massimo; Ricciardi, Giuseppe Kenneth; Longhi, Michele; Nicolato, Antonio

    2015-01-01

    Stereotactic radiosurgery (SRS) is currently a well-established, minimally invasive treatment for many primary and secondary tumors, especially deep-sited lesions for which traditional neurosurgical procedures were poorly satisfactory or not effective at all. The initial evolution of SRS was cautious, relying on more than 30 years of experimental and clinical work that preceded its introduction into the worldwide medical community. This path enabled a brilliant present, and the continuous pace of technological advancement holds promise for a brighter future. Part II of this review article will cover the impact of multimodal adjuvant technologies on SRS, and their input to the crucial role played by neurosurgeons, radiation oncologists and medical physicists in the management and care of fragile neuro-oncological patients.

  9. Guidelines, "minimal requirements" and standard of care in glioblastoma around the Mediterranean Area: A report from the AROME (Association of Radiotherapy and Oncology of the Mediterranean arEa) Neuro-Oncology working party.

    PubMed

    2016-02-01

    Glioblastoma is the most common and the most lethal primary brain tumor in adults. Although studies are ongoing, the epidemiology of glioblastoma in North Africa (i.e. Morocco, Algeria and Tunisia) remains imperfectly settled and needs to be specified for a better optimization of the neuro-oncology healthcare across the Mediterranean area and in North Africa countries. Over the last years significant therapeutic advances have been accomplished improving survival and quality of life of glioblastoma patients. Indeed, concurrent temozolomide-radiotherapy (temoradiation) and adjuvant temozolomide has been established as the standard of care associated with a survival benefit and a better outcome. Therefore, considering this validated strategy and regarding the means and some other North Africa countries specificities, we decided, under the auspices of AROME (association of radiotherapy and oncology of the Mediterranean area; www.aromecancer.org), a non-profit organization, to organize a dedicated meeting to discuss the standards and elaborate a consensus on the "minimal requirements" adapted to the local resources. Thus, panels of physicians involved in daily multidisciplinary brain tumors management in the two borders of the Mediterranean area have been invited to the AROME neuro-oncology working party. We report here the consensus, established for minimal human and material resources for glioblastoma diagnosis and treatment faced to the standard of care, which should be reached. If the minimal requirements are not reached, the patients should be referred to the closest specialized medical center where at least minimal requirements, or, ideally, the standard of care should be guaranteed to the patients.

  10. Personalized care in neuro-oncology coming of age: why we need MGMT and 1p/19q testing for malignant glioma patients in clinical practice.

    PubMed

    Weller, Michael; Stupp, Roger; Hegi, Monika E; van den Bent, Martin; Tonn, Joerg C; Sanson, Marc; Wick, Wolfgang; Reifenberger, Guido

    2012-09-01

    encouraging step toward the development of personalized therapeutic approaches in neuro-oncology.

  11. Response assessment after stereotactic body radiotherapy for spinal metastasis: a report from the SPIne response assessment in Neuro-Oncology (SPINO) group.

    PubMed

    Thibault, Isabelle; Chang, Eric L; Sheehan, Jason; Ahluwalia, Manmeet S; Guckenberger, Matthias; Sohn, Moon-Jun; Ryu, Samuel; Foote, Matthew; Lo, Simon S; Muacevic, Alexander; Soltys, Scott G; Chao, Samuel; Gerszten, Peter; Lis, Eric; Yu, Eugene; Bilsky, Mark; Fisher, Charles; Schiff, David; Fehlings, Michael G; Ma, Lijun; Chang, Susan; Chow, Edward; Parelukar, Wendy R; Vogelbaum, Michael A; Sahgal, Arjun

    2015-12-01

    The SPine response assessment In Neuro-Oncology (SPINO) group is a committee of the Response Assessment in Neuro-Oncology working group and comprises a panel of international experts in spine stereotactic body radiotherapy (SBRT). Here, we present the group's first report on the challenges in standardising imaging-based assessment of local control and pain for spinal metastases. We review current imaging modalities used in SBRT treatment planning and tumour assessment and review the criteria for pain and local control in registered clinical trials specific to spine SBRT. We summarise the results of an international survey of the panel to establish the range of current practices in assessing tumour response to spine SBRT. The ultimate goal of the SPINO group is to report consensus criteria for tumour imaging, clinical assessment, and symptom-based response criteria to help standardise future clinical trials. PMID:26678212

  12. Response Assessment in Neuro-Oncology working group and European Association for Neuro-Oncology recommendations for the clinical use of PET imaging in gliomas.

    PubMed

    Albert, Nathalie L; Weller, Michael; Suchorska, Bogdana; Galldiks, Norbert; Soffietti, Riccardo; Kim, Michelle M; la Fougère, Christian; Pope, Whitney; Law, Ian; Arbizu, Javier; Chamberlain, Marc C; Vogelbaum, Michael; Ellingson, Ben M; Tonn, Joerg C

    2016-09-01

    This guideline provides recommendations for the use of PET imaging in gliomas. The review examines established clinical benefit in glioma patients of PET using glucose ((18)F-FDG) and amino acid tracers ((11)C-MET, (18)F-FET, and (18)F-FDOPA). An increasing number of studies have been published on PET imaging in the setting of diagnosis, biopsy, and resection as well radiotherapy planning, treatment monitoring, and response assessment. Recommendations are based on evidence generated from studies which validated PET findings by histology or clinical course. This guideline emphasizes the clinical value of PET imaging with superiority of amino acid PET over glucose PET and provides a framework for the use of PET to assist in the management of patients with gliomas.

  13. Response Assessment in Neuro-Oncology working group and European Association for Neuro-Oncology recommendations for the clinical use of PET imaging in gliomas.

    PubMed

    Albert, Nathalie L; Weller, Michael; Suchorska, Bogdana; Galldiks, Norbert; Soffietti, Riccardo; Kim, Michelle M; la Fougère, Christian; Pope, Whitney; Law, Ian; Arbizu, Javier; Chamberlain, Marc C; Vogelbaum, Michael; Ellingson, Ben M; Tonn, Joerg C

    2016-09-01

    This guideline provides recommendations for the use of PET imaging in gliomas. The review examines established clinical benefit in glioma patients of PET using glucose ((18)F-FDG) and amino acid tracers ((11)C-MET, (18)F-FET, and (18)F-FDOPA). An increasing number of studies have been published on PET imaging in the setting of diagnosis, biopsy, and resection as well radiotherapy planning, treatment monitoring, and response assessment. Recommendations are based on evidence generated from studies which validated PET findings by histology or clinical course. This guideline emphasizes the clinical value of PET imaging with superiority of amino acid PET over glucose PET and provides a framework for the use of PET to assist in the management of patients with gliomas. PMID:27106405

  14. Pediatric high-grade astrocytomas: a distinct neuro-oncological paradigm.

    PubMed

    Gerges, Noha; Fontebasso, Adam M; Albrecht, Steffen; Faury, Damien; Jabado, Nada

    2013-01-01

    Brain tumors are the leading cause of cancer-related death in children. High-grade astrocytomas (HGAs), in particular, are lethal in children across all ages. Integrative genome-wide analyses of the tumor's genome, transcriptome and epigenome, using next-generation sequencing technologies and genome-wide DNA methylation arrays, have provided valuable breakthroughs in our understanding of the pathogenesis of HGAs across all ages. Recent profiling studies have provided insight into the epigenetic nature of gliomas in young adults and HGAs in children, particularly with the identification of recurrent gain-of-function driver mutations in the isocitrate dehydrogenase 1 and 2 genes (IDH1/2) and the epigenetic influence of their oncometabolite 2-hydroxyglutarate, as well as mutations in the histone 3 variant 3 gene (H3F3A) and loss-of-function mutations in the histone 3 lysine 36 trimethyltransferase gene (SETD2). Mutations in H3F3A result in amino acid substitutions at residues thought to directly (K27M) or indirectly (G34R/V) affect histone post-translational modifications, suggesting they have the capacity to affect the epigenome in a profound manner. Here, we review recent genomic studies, and discuss evidence supporting the molecular characterization of pediatric HGAs to complement traditional approaches, such as histology of resected tumors. We also describe newly identified molecular mechanisms and discuss putative therapeutic approaches for HGAs specific to pediatrics, highlighting the necessity for the evolution of HGA disease management approaches. PMID:23906214

  15. Neuro-Oncology Branch

    MedlinePlus

    ... prototype of a biology-driven, individualized, patient-centric rational therapeutics program. About The Brain Tumor Clinic at NIH ... prototype of a biology-driven, individualized, patient-centric rational therapeutics program. Make an appointment call 866-251-9686 ...

  16. Educational Feasibility Study -- 1966.

    ERIC Educational Resources Information Center

    Hubbard, Ben C., Comp.; And Others

    By virtue of a Title III Elementary and Secondary Education Act grant, the feasibility of consolidating 7 Illinois high schools was studied. Areas of consideration were geographic characteristics, high school and elementary curriculum, and cost considerations relative to high school and elementary school buildings, curriculum, transportation,…

  17. Atmospheric rendezvous feasibility study

    NASA Technical Reports Server (NTRS)

    Schaezler, A. D.

    1972-01-01

    A study was carried out to determine the feasibility of using atmospheric rendezvous to increase the efficiency of space transportation and to determine the most effective implementation. It is concluded that atmospheric rendezvous is feasible and can be utilized in a space transportation system to reduce size of the orbiter vehicle, provide a powered landing with go-around capability for every mission, and achieve lateral range performance that exceeds requirements. A significantly lighter booster and reduced launch fuel requirements are additional benefits that can be realized with a system that includes a large subsonic airplane for recovery of the orbiter. Additional reduction in booster size is possible if the airplane is designed for recovery of the booster by towing. An airplane about the size of the C-5A is required.

  18. A MEDLINE feasibility study.

    PubMed Central

    McGee, J L

    1980-01-01

    A MEDLINE feasibility study was conducted with the Northeastern Consortium for Health Information (NECHI) and sponsored by the New England Regional Medical Library Service. It is based on the theory that most potential users and supporters of MEDLINE within hospitals are unaware of its usefulness and applications, and that there exists a need for expanding MEDLINE services to more hospital libraries. The purpose of the study was to provide NECHI with an evaluation of MEDLINE as a feasible service by ascertaining the need and by evaluating the usefulness, satisfaction, and costs of the system. The study demonstrated sufficient use of MEDLINE to justify implementation within NECHI and it provided useful data to determine the future of MEDLINE in each institution. It documented that utilization improved rapidly with publicity and the presence of the system within an institution, that MEDLINE can be an effective and economical complement to the traditional reference services used to support information needs in hospitals, and that more hospital libraries should be able to implement MEDLINE to their advantage once potential users and supporters have been exposed to the system. PMID:6998531

  19. The MRIS feasibility study

    NASA Technical Reports Server (NTRS)

    Neece, Robert T.; Cross, Aubrey E.; Schrader, James H.

    1993-01-01

    The Microwave Reflectometer Ionization Sensor (MRIS) is an instrument being developed for use in detecting and ranging of electron density layers in the reentry plasma of a space transfer vehicle. The rationale for the selection of the Double Sideband Suppressed Carrier (DSBSC) system used in the feasibility study for the MRIS is presented. A 25 GHz single-oscillator system and a 220 GHz double-oscillator system are described. The 25 GHz system was constructed and tested in the laboratory and test results are presented. As developed, the system employs a sideband spacing of 160 MHz. Based on an estimated electromagnetic wave velocity in the plasma, a round-trip phase shift measurement accuracy of +/- 7.6 degrees was required for the desired +/- 1/2 cm distance measurement accuracy. The interaction of parallel ground and reflecting planes produces interference that prevents the basic DSBSC system from meeting the accuracy goal so a frequency modulation was added to the system to allow averaging of the measured phase deviation. With an FM deviation of +/- 1 GHz, laboratory measurements were made for distances from 5 to 61 cm tip free space. Accounting for the plasma velocity factor, 82 percent of the data were equal to or better than the desired accuracy. Based on this measured result a sideband spacing to 250 MHz could be expected to yield data approximately 96 percent within the accuracy goal.

  20. Tribal Utility Feasibility Study

    SciTech Connect

    Engel, R. A.; Zoellick, J. J.

    2007-06-30

    The Schatz Energy Research Center (SERC) assisted the Yurok Tribe in investigating the feasibility of creating a permanent energy services program for the Tribe. The original purpose of the DOE grant that funded this project was to determine the feasibility of creating a full-blown Yurok Tribal electric utility to buy and sell electric power and own and maintain all electric power infrastructure on the Reservation. The original project consultant found this opportunity to be infeasible for the Tribe. When SERC took over as project consultant, we took a different approach. We explored opportunities for the Tribe to develop its own renewable energy resources for use on the Reservation and/or off-Reservation sales as a means of generating revenue for the Tribe. We also looked at ways the Tribe can provide energy services to its members and how to fund such efforts. We identified opportunities for the development of renewable energy resources and energy services on the Yurok Reservation that fall into five basic categories: • Demand-side management – This refers to efforts to reduce energy use through energy efficiency and conservation measures. • Off-grid, facility and household scale renewable energy systems – These systems can provide electricity to individual homes and Tribal facilities in areas of the Reservation that do not currently have access to the electric utility grid. • Village scale, micro-grid renewable energy systems - These are larger scale systems that can provide electricity to interconnected groups of homes and Tribal facilities in areas of the Reservation that do not have access to the conventional electric grid. This will require the development of miniature electric grids to serve these interconnected facilities. • Medium to large scale renewable energy development for sale to the grid – In areas where viable renewable energy resources exist and there is access to the conventional electric utility grid, these resources can be

  1. Flathead Renewable Energy Feasibility Study

    SciTech Connect

    Belvin Pete: Ed McCarthy; Krista Gordon; Chris Bergen; Rhett Good

    2006-10-03

    The study shall assess the feasibility of a commercial wind facility on lands selected and owned by the Salish and Kootenai Tribes and shall examine the potential for the development of solar and biomass resources located on Tribal Lands.

  2. Wind Farm Feasibility Study

    SciTech Connect

    Richard Curry; Erik Foley; DOE Project Officer - Keith Bennett

    2007-07-11

    Saint Francis University has assessed the Swallow Farm property located in Shade Township, Somerset County, Pennsylvania as a potential wind power development site. Saint Francis worked with McLean Energy Partners to have a 50-meter meteorological tower installed on the property in April 2004 and continues to conduct a meteorological assessment of the site. Results suggest a mean average wind speed at 80 meters of 17 mph with a net capacity factor of 31 - 33%. Approximate electricity generation capacity of the project is 10 megawatts. Also, the University used matching funds provided by the federal government to contract with ABR, Inc. to conduct radar studies of nocturnal migration of birds and bats during the migrations seasons in the Spring and Fall of 2005 with a mean nocturnal flight altitude of 402 meters with less than 5% of targets at altitudes of less than 125 meters. The mean nocturnal passage rate was 166 targets/km/h in the fall and 145 targets/km/h in the spring. Lastly, University faculty and students conducted a nesting bird study May - July 2006. Seventy-three (73) species of birds were observed with 65 determined to be breeding or potentially breeding species; this figure represents approximately 30% of the 214 breeding bird species in Pennsylvania. No officially protected avian species were determined to be nesting at Swallow Farm.

  3. Tivoli Brewery: A Feasibility Study.

    ERIC Educational Resources Information Center

    More, Combs, and Burch, Denver, CO.

    This document reports on a study made to ascertain the feasibility of preserving and restoring all or part of an existing historical site -- the "Tivoli Brewery" -- as a related and integral part of the Auraria Higher Education Center. After investigation of the building's structural integrity, the condition of electrical and mechanical systems,…

  4. Combining random forest and 2D correlation analysis to identify serum spectral signatures for neuro-oncology.

    PubMed

    Smith, Benjamin R; Ashton, Katherine M; Brodbelt, Andrew; Dawson, Timothy; Jenkinson, Michael D; Hunt, Neil T; Palmer, David S; Baker, Matthew J

    2016-06-01

    Fourier transform infrared (FTIR) spectroscopy has long been established as an analytical technique for the measurement of vibrational modes of molecular systems. More recently, FTIR has been used for the analysis of biofluids with the aim of becoming a tool to aid diagnosis. For the clinician, this represents a convenient, fast, non-subjective option for the study of biofluids and the diagnosis of disease states. The patient also benefits from this method, as the procedure for the collection of serum is much less invasive and stressful than traditional biopsy. This is especially true of patients in whom brain cancer is suspected. A brain biopsy is very unpleasant for the patient, potentially dangerous and can occasionally be inconclusive. We therefore present a method for the diagnosis of brain cancer from serum samples using FTIR and machine learning techniques. The scope of the study involved 433 patients from whom were collected 9 spectra each in the range 600-4000 cm(-1). To begin the development of the novel method, various pre-processing steps were investigated and ranked in terms of final accuracy of the diagnosis. Random forest machine learning was utilised as a classifier to separate patients into cancer or non-cancer categories based upon the intensities of wavenumbers present in their spectra. Generalised 2D correlational analysis was then employed to further augment the machine learning, and also to establish spectral features important for the distinction between cancer and non-cancer serum samples. Using these methods, sensitivities of up to 92.8% and specificities of up to 91.5% were possible. Furthermore, ratiometrics were also investigated in order to establish any correlations present in the dataset. We show a rapid, computationally light, accurate, statistically robust methodology for the identification of spectral features present in differing disease states. With current advances in IR technology, such as the development of rapid discrete

  5. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  6. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  7. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  8. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  9. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  10. Lunar Analog Feasibility Study Results

    NASA Technical Reports Server (NTRS)

    Cromwell, Ronita L.; Neigut, Joe

    2009-01-01

    This slide presentation reviews a study designed to determine the feasibility of using a 9.5 deg head-up tilt bed rest model to simulate the effects of the 1/6 g load to the human body that exists on the lunar surface. The effect of different types of compression stockings, the pre-bed rest diet, and the use of a specific exercise program were reviewed for comfort, force verification and plasma volume shift

  11. Manzanita Wind Energy Feasibility Study

    SciTech Connect

    Trisha Frank

    2004-09-30

    The Manzanita Indian Reservation is located in southeastern San Diego County, California. The Tribe has long recognized that the Reservation has an abundant wind resource that could be commercially utilized to its benefit. Manzanita has explored the wind resource potential on tribal land and developed a business plan by means of this wind energy feasibility project, which enables Manzanita to make informed decisions when considering the benefits and risks of encouraging large-scale wind power development on their lands. Technical consultant to the project has been SeaWest Consulting, LLC, an established wind power consulting company. The technical scope of the project covered the full range of feasibility assessment activities from site selection through completion of a business plan for implementation. The primary objectives of this feasibility study were to: (1) document the quality and suitability of the Manzanita Reservation as a site for installation and long-term operation of a commercially viable utility-scale wind power project; and, (2) develop a comprehensive and financeable business plan.

  12. DPC loading feasibility study report

    SciTech Connect

    Dafoe, R.E.; Lopez, D.A.; Williams, K.L.

    1997-11-01

    Disposal of radioactive wastes now stored at the Idaho Chemical Processing Plant at the Idaho National Engineering and Environmental Laboratory is mandated under a ``Settlement Agreement`` between the Department of Energy and the State of Idaho. This study investigates the feasibility of using the Dry Transfer Cell facility to package waste into Dual Purpose Canisters for interim storage at the adjacent Dry Storage System comprised of an interim storage pad with NUHOMS{reg_sign} storage modules. The wastes would then be road-ready for eventual disposal in a permanent repository. The operating period for these activities is expected to be from 2015 to 2035.

  13. Polarized-interferometer feasibility study

    NASA Technical Reports Server (NTRS)

    Raab, F. H.

    1983-01-01

    The feasibility of using a polarized-interferometer system as a rendezvous and docking sensor for two cooperating spacecraft was studied. The polarized interferometer is a radio frequency system for long range, real time determination of relative position and attitude. Range is determined by round trip signal timing. Direction is determined by radio interferometry. Relative roll is determined from signal polarization. Each spacecraft is equipped with a transponder and an antenna array. The antenna arrays consist of four crossed dipoles that can transmit or receive either circularly or linearly polarized signals. The active spacecraft is equipped with a sophisticated transponder and makes all measurements. The transponder on the passive spacecraft is a relatively simple repeater. An initialization algorithm is developed to estimate position and attitude without any a priori information. A tracking algorithm based upon minimum variance linear estimators is also developed. Techniques to simplify the transponder on the passive spacecraft are investigated and a suitable configuration is determined. A multiple carrier CW signal format is selected. The dependence of range accuracy and ambiguity resolution error probability are derived and used to design a candidate system. The validity of the design and the feasibility of the polarized interferometer concept are verified by simulation.

  14. Shuttle seated extraction feasibility study

    NASA Astrophysics Data System (ADS)

    Onagel, Steven R.; Bement, Laurence J.

    Following the Space Shuttle Challenger accident, serious attention has turned to in-flight escape. Prior to the resumption of flight, a manual bailout system was qualified and installed. For the long term, a seated extraction system to expand the escape envelope is being investigated. This paper describes a 1987 study, conducted jointly by NASA/Johnson Space Center and Langley Research Center, to determine the feasibility of modifying the Space Shuttle Orbiters to incorporate the seated extraction system. Results of the study are positive, indicating retrofit opportunity and high probability of escape for early ascent, late entry, and even for uncontrolled flight such as the Challenger breakup. The system, as envisioned, can extract seven crewmembers within two seconds.

  15. IPNS upgrade: A feasibility study

    SciTech Connect

    1995-04-01

    Many of Argonne National Laboratory`s (ANL`s) scientific staff members were very active in R&D work related to accelerator-based spoliation sources in the 1970s and early 1980s. In 1984, the Seitz/Eastman Panel of the National Academy of Sciences reviewed U.S. materials science research facilities. One of the recommendations of this panel was that the United States build a reactor-based steady-state source, the Advanced Neutron Source (ANS), at Oak Ridge National Laboratory. Subsequently, R&D activities related to the design of an accelerator-based source assumed a lower priority. The resumption of pulsed-source studies in this country started simultaneously with design activities in Europe aimed at the European Spallation Source (ESS). The European Community funded a workshop in September 1991 to define the parameters of the ESS. Participants in this workshop included both accelerator builders and neutron source users. A consortium of European countries has proposed to build a 5-MW pulsed source, and a feasibility study is currently under way. Soon after the birth of the ESS, a small group at ANL set about bringing themselves up to date on pulsed-source information since 1984 and studied the feasibility of upgrading ANL`s Intense Pulsed Neutron Source (IPNS) to 1 MW by means of a rapidly cycling synchrotron that could be housed, along with its support facilities, in existing buildings. In early 1993, the Kohn panel recommended that (1) design and construction of the ANS should be completed according to the proposed project schedule and (2) development of competitive proposals for cost-effective design and construction of a 1-MW pulsed spallation source should be authorized immediately.

  16. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants... initiate a feasibility study to determine whether there is justification to encourage and maintain...

  17. 7 CFR 4279.250 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Feasibility studies. 4279.250 Section 4279.250... § 4279.250 Feasibility studies. The provisions of § 4279.150 do not apply to this subpart. Instead, feasibility studies must meet the requirements specified in § 4279.261(f)....

  18. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants... initiate a feasibility study to determine whether there is justification to encourage and maintain...

  19. Photoacoustic biopsy: a feasibility study

    NASA Astrophysics Data System (ADS)

    Xu, Guan; Tomlins, Scott A.; Siddiqui, Javed; Davis, Mandy A.; Kunju, Lakshmi P.; Wei, John T.; Wang, Xueding

    2015-03-01

    Photoacoustic (PA) measurements encode the information associated with both physical microstructures and chemical contents in biological tissues. A two-dimensional physio-chemical spectrogram (PCS) can be formulated by combining the power spectra of PA signals acquired at a series of optical wavelengths. The analysis of PCS, or namely PA physio-chemical analysis (PAPCA), enables the quantification of the concentrations and the spatial distributions of a variety of chemical components in the tissue. The chemical components and their distribution are the two major features observed in the biopsy procedures which have been regarded as the gold standard of the diagnosis of many diseases. Taking non-alcoholic fatty liver disease and prostate cancer for example, this study investigates the feasibility of PAPCA in characterizing the histopathological changes in the diseased conditions in biological tissue. A catheter based setup facilitating measurement in deep tissues was also proposed and tested.

  20. Muon muon collider: Feasibility study

    SciTech Connect

    1996-06-18

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup {minus}2} s{sup {minus}1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice--the authors believe--to allow them to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring which has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design.

  1. Beluga coal gasification feasibility study

    SciTech Connect

    Robert Chaney; Lawrence Van Bibber

    2006-07-15

    The objective of the study was to determine the economic feasibility of developing and siting a coal-based integrated gasification combined-cycle (IGCC) plant in the Cook Inlet region of Alaska for the co-production of electric power and marketable by-products. The by-products, which may include synthesis gas, Fischer-Tropsch (F-T) liquids, fertilizers such as ammonia and urea, alcohols, hydrogen, nitrogen and carbon dioxide, would be manufactured for local use or for sale in domestic and foreign markets. This report for Phase 1 summarizes the investigation of an IGCC system for a specific industrial setting on the Cook Inlet, the Agrium U.S. Inc. ('Agrium') fertilizer plant in Nikiski, Alaska. Faced with an increase in natural gas price and a decrease in supply, the Agrium is investigating alternatives to gas as feed stock for their plant. This study considered all aspects of the installation and infrastructure, including: coal supply and cost, coal transport costs, delivery routes, feedstock production for fertilizer manufacture, plant steam and power, carbon dioxide (CO{sub 2}) uses, markets for possible additional products, and environmental permit requirements. The Cook Inlet-specific Phase 1 results, reported here, provided insight and information that led to the conclusion that the second study should be for an F-T plant sited at the Usibelli Coal Mine near Healy, Alaska. This Phase 1 case study is for a very specific IGCC system tailored to fit the chemical and energy needs of the fertilizer manufacturing plant. It demonstrates the flexibility of IGCC for a variety of fuel feedstocks depending on plant location and fuel availability, as well as the available variety of gas separation, gas cleanup, and power and steam generation technologies to fit specific site needs. 18 figs., 37 tabs., 6 apps.

  2. Asteroid Return Mission Feasibility Study

    NASA Technical Reports Server (NTRS)

    Brophy, John R.; Gershman, Robert; Landau, Damon; Polk, James; Porter, Chris; Yeomans, Don; Allen, Carlton; Williams, Willie; Asphaug, Erik

    2011-01-01

    This paper describes an investigation into the technological feasibility of finding, characterizing, robotically capturing, and returning an entire Near-Earth Asteroid (NEA) to the International Space Station (ISS) for scientific investigation, evaluation of its resource potential, determination of its internal structure and other aspects important for planetary defense activities, and to serve as a testbed for human operations in the vicinity of an asteroid. Reasonable projections suggest that several dozen candidates NEAs in the size range of interest (approximately 2-m diameter) will be known before the end of the decade from which a suitable target could be selected. The conceptual mission objective is to return an approximately 10,000-kg asteroid to the ISS in a total flight time of approximately 5 years using a single Evolved Expendable Launch Vehicle. Preliminary calculations indicate that this could be accomplished using a solar electric propulsion (SEP) system with high-power Hall thrusters and a maximum power into the propulsion system of approximately 40 kW. The SEP system would be used to provide all of the post-launch delta V. The asteroid would have an unrestricted Earth return Planetary Protection categorization, and would be curated at the ISS where numerous scientific and resource utilization experiments would be conducted. Asteroid material brought to the ground would be curated at the NASA Johnson Space Center. This preliminary study identified several areas where additional work is required, but no show stoppers were identified for the approach that would return an entire 10,000-kg asteroid to the ISS in a mission that could be launched by the end of this decade.

  3. Dual-Doppler Feasibility Study

    NASA Technical Reports Server (NTRS)

    Huddleston, Lisa L.

    2012-01-01

    When two or more Doppler weather radar systems are monitoring the same region, the Doppler velocities can be combined to form a three-dimensional (3-D) wind vector field thus providing for a more intuitive analysis of the wind field. A real-time display of the 3-D winds can assist forecasters in predicting the onset of convection and severe weather. The data can also be used to initialize local numerical weather prediction models. Two operational Doppler Radar systems are in the vicinity of Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS); these systems are operated by the 45th Space Wing (45 SW) and the National Weather Service Melbourne, Fla. (NWS MLB). Dual-Doppler applications were considered by the 45 SW in choosing the site for the new radar. Accordingly, the 45th Weather Squadron (45 WS), NWS MLB and the National Aeronautics and Space Administration tasked the Applied Meteorology Unit (AMU) to investigate the feasibility of establishing dual-Doppler capability using the two existing systems. This study investigated technical, hardware, and software requirements necessary to enable the establishment of a dual-Doppler capability. Review of the available literature pertaining to the dual-Doppler technique and consultation with experts revealed that the physical locations and resulting beam crossing angles of the 45 SW and NWS MLB radars make them ideally suited for a dual-Doppler capability. The dual-Doppler equations were derived to facilitate complete understanding of dual-Doppler synthesis; to determine the technical information requirements; and to determine the components of wind velocity from the equation of continuity and radial velocity data collected by the two Doppler radars. Analysis confirmed the suitability of the existing systems to provide the desired capability. In addition, it is possible that both 45 SW radar data and Terminal Doppler Weather Radar data from Orlando International Airport could be used to alleviate any

  4. Multnomah County Hydrokinetic Feasibility Study: Final Feasibility Study Report

    SciTech Connect

    Spain, Stephen

    2012-03-15

    HDR has completed a study of the technical, regulatory, and economic feasibility of installing hydrokinetic turbines under the Morrison, Broadway, and Sellwood bridges. The primary objective of installing hydrokinetic turbines is a demonstration of in-stream hydrokinetic technologies for public education and outreach. Due to the low gradient of the Lower Willamette and the effects of the tide, velocities in the area in consideration are simply not high enough to economically support a commercial installation. While the velocities in the river may at times provide enough energy for a commercial turbine to reach capacity, the frequency and duration of high flow events which provide suitable velocities is not sufficient to support a commercial hydrokinetic installation. We have observed that over an 11 year period, daily average velocities in the Lower Willamette exceeded a nominal cut-in speed of 0.75 m/s only 20% of the time, leaving net zero power production for the remaining 80% of days. The Sellwood Bridge site was estimated to have the best hydrokinetic resource, with an estimated average annual production of about 9,000 kWh. The estimated production could range from 2,500 kWh to 15,000 kWh. Based on these energy estimates, the amount of revenue generated through either a power purchase agreement (PPA) or recovered through net metering is not sufficient to repay the project costs within the life of the turbine. The hydrokinetic resource at the Morrison and Broadway Bridges is slightly smaller than at the Sellwood Bridge. While the Broadway and Morrison Bridges have existing infrastructure that could be utilized, the project is not expected to generate enough revenue to repay the investment. Despite low velocities and energy production, the sites themselves are favorable for installation of a demonstration or experimental project. With high public interest in renewable energy, the possibility exists to develop a hydrokinetic test site which could provide

  5. WERF MACT Feasibility Study Report

    SciTech Connect

    B. Bonnema; D. Moser; J. Riedesel; K. Kooda; K. Liekhus; K. Rebish; S. Poling

    1998-11-01

    This study was undertaken to determine the technical feasibility of upgrading the Waste Experimental Reduction Facility (WERF) at the Idaho National Engineering and Environmental Laboratory to meet the offgas emission limits proposed in the Maximum Achievable Control Technologies (MACT)rule. Four practicable offgas treatment processes were identified, which, if installed, would enable the WERF to meet the anticipated MACT emission limits for dioxins and furans (D/F), hydrochloric acid (HCI), and mercury (Hg). Due to the three-year time restraint for MACT compliance, any technology chosen for the upgrade must be performed within the general plant project funding limit of $5 M. The option selected consists of a partial-quench evaporative cooler with dry sorbent injection for HCI removal followed by a sulfur-impregnated activated carbon bed for Hg control. The planning cost estimate for implementing the option is $4.17 M (with 24% contingency). The total estimated cost includes capital costs, design and construction costs, and project management costs. Capital costs include the purchase of a new offgas evaporative cooler, a dry sorbent injection system with reagent storage, a new fabric filter baghouse, a fixed carbon bed absorber, and two offgas induced draft exhaust fans. It is estimated that 21 months will be required to complete the recommended modification to the WERF. The partial-quench cooler is designed to rapidly cool the offgas exiting the secondary combustion chamber to minimize D/F formation. Dry sorbent injection of an alkali reagent into the offgas is recommended. The alkali reacts with the HCI to form a salt, which is captured with the fly ash in the baghouse. A design HCI removal efficiency of 97.2% allows for the feeding 20 lbs/hr of chlorine to the WERF incinerator. The sorbent feed rate can be adjusted to achieve the desired HCI removal efficiency. A fixed bed of sulfur-impregnated carbon was conservatively sized for a total Hg removal capacity when

  6. Sault Tribe Wind Energy Feasibility Study

    SciTech Connect

    Toni Osterhout; Global Energy Concepts

    2005-07-31

    The Sault Tribe conducted a feasibility study on tribal lands in the Upper Peninsula of Michigan to determine the technical and economic feasibility of both small and large-scale wind power development on tribal lands. The study included a wind resource assessment, transmission system analysis, engineering and regulatory analyzes and assessments.

  7. Muon Muon Collider: Feasibility Study

    SciTech Connect

    Gallardo, J.C.; Palmer, R.B.; Tollestrup, A.V.; Sessler, A.M.; Skrinsky, A.N.; Ankenbrandt, C.; Geer, S.; Griffin, J.; Johnstone, C.; Lebrun, P.; McInturff, A.; Mills, Frederick E.; Mokhov, N.; Moretti, A.; Neuffer, D.; Ng, K.Y.; Noble, R.; Novitski, I.; Popovic, M.; Qian, C.; Van Ginneken, A. /Fermilab /Brookhaven /Wisconsin U., Madison /Tel Aviv U. /Indiana U. /UCLA /LBL, Berkeley /SLAC /Argonne /Sobolev IM, Novosibirsk /UC, Davis /Munich, Tech. U. /Virginia U. /KEK, Tsukuba /DESY /Novosibirsk, IYF /Jefferson Lab /Mississippi U. /SUNY, Stony Brook /MIT /Columbia U. /Fairfield U. /UC, Berkeley

    2012-04-05

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup -2}s{sup -1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice - we believe - to allow us to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring wich has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design. Muons because of their large mass compared to an electron, do not produce significant synchrotron radiation. As a result there is negligible beamstrahlung and high energy collisions are not limited by this phenomena. In addition, muons can be accelerated in circular devices which will be considerably smaller than two full-energy linacs as required in an e{sup +} - e{sup -} collider. A hadron collider would require a CM energy 5 to 10 times higher than 4 TeV to have an equivalent energy reach. Since the accelerator size is limited by the strength of bending magnets, the hadron collider for the same physics reach would have to be much larger than the muon collider. In addition, muon collisions should be cleaner than hadron collisions. There are many detailed particle

  8. Preliminary guided rocket feasibility study.

    NASA Technical Reports Server (NTRS)

    Nolan, M. B.; Celmer, J. J.

    1973-01-01

    The feasibility of actively guiding sounding rockets to reduce impact dispersion has been investigated. The theoretical probability of Range Safety thrust termination for several high performance rockets was combined with the cost of acquiring the extended range at White Sands Missile Range (WSMR) to establish a guidance system price ceiling of $20K per flight. Guiding the Black Brant VC for the first five seconds of flight results in sufficient dispersion reduction to impact within the standard range boundaries at WSMR. The guidance system thrust level required to statically control the vehicle to a nominal-wind weighted trajectory for five seconds is between 150-200 pounds. A six-degree-of-freedom trajectory program with guidance simulation capability has been developed and the equations are delineated in this paper.

  9. Preliminary guided rocket feasibility study

    NASA Technical Reports Server (NTRS)

    Nolan, M. B.; Celmer, J. J.

    1973-01-01

    The feasibility of actively guiding sounding rockets to reduce impact dispersion has been investigated. The theoretical probability of range safety thrust termination for several high performance rockets was combined with the cost of acquiring the extended range at White Sands Missile Range (WSMR) to establish a guidance system price ceiling of $20K per flight. Guiding the Black Brant VC (BBVC) for the first five seconds of flight results in sufficient dispersion reduction to impact within the standard range boundaries at WSMR. The guidance system thrust level required to statically control the vehicle to a nominal-wind weighted trajectory for five seconds is between 150-200 pounds. A six-degree-of-freedom trajectory program with guidance simulation capability has been developed and the equations are presented.

  10. Conceptual Thermal Treatment Technologies Feasibility Study

    SciTech Connect

    Suer, A.

    1996-02-28

    This report presents a conceptual Thermal Treatment Technologies Feasibility Study (FS) for the Savannah River Site (SRS) focusing exclusively on thermal treatment technologies for contaminated soil, sediment, or sludge remediation projects.

  11. Three Affliated Tribes Renewable Energy Feasibility Study

    SciTech Connect

    Belvin Pete; Kent Good; Krista Gordon; Ed McCarthy,

    2006-05-26

    The Three Affliated Tribes on the Fort Berthold Reservation studied the feasibility of a commercial wind facility on land selected and owned by the Tribes and examined the potential for the development of renewable energy resources on Tribal Lands.

  12. White Earth Biomass/Biogas Feasibility Study

    SciTech Connect

    Triplett, Michael

    2015-03-12

    The White Earth Nation examined the feasibility of cost savings and fossil energy reduction through the installation of biogas/biomass boiler at the tribal casino. The study rejected biogas options due to availability and site constraints, but found a favorable environment for technical and financial feasibility of installing a 5 MMBtu hot water boiler system to offset 60-70 percent of current fuel oil and propane usage.

  13. Satellite animal tracking feasibility studies

    NASA Technical Reports Server (NTRS)

    Buechner, H. K.

    1975-01-01

    A study was initiated in Tsavo National Park to determine movements and home ranges of individual elephants and their relations to overall distribution patterns and environmental factors such as rainfall. Methods used were radio tracking and observations of visually identifiable individuals. Aerial counts provided data on overall distribution. Two bulls and two cows were radio-tagged in Tsavo West and two bulls and four cows in Tsavo East, providing home range and movement data. The movements of individuals were useful in interpreting relatively major shifts in elephant distribution. Results point to the following preliminary conclusions: (1) elephants in the Tsavo area undertook long distance movements in fairly direct response to localized rainfall; (2) a subdivision of the overall population into locally distinct units may exist during the dry season but did not occur after significant rainfall; and (3) food appears to be the primary factor governing movements and distribution of elephants in the area.

  14. Is there a role for clinical practice guidelines in multidisciplinary tumor board meetings? A descriptive study of knowledge transfer between research and practice.

    PubMed

    Kostaras, Xanthoula; Shea-Budgell, Melissa A; Malcolm, Emily; Easaw, Jacob C; Roa, Wilson; Hagen, Neil A

    2012-03-01

    The aim of this study was to characterize practice patterns and decision-making processes of healthcare providers attending weekly neuro-oncology tumor board meetings, and to assess their familiarity with clinical practice guidelines (CPGs) in neuro-oncology. Members of the Neuro-Oncology Tumor Team at two tertiary cancer centers completed a web-based questionnaire assessing characteristics of weekly tumor board meetings and perceptions of CPGs. Twenty-three (66%) tumor team members responded. Diagnostic imaging results and interpretation, medical, surgical, and/or radiation treatment planning, and pathology results and interpretation were the most commonly identified aspects of patient care discussed at tumor board meetings, and almost all respondents indicated that these meetings were "very beneficial" to their own practice. When deciding on a treatment plan, respondents rely most on the clinical expertise of colleagues, medical literature, personal experience, active clinical trial protocols, and published CPGs. Opinions of the local CPGs varied considerably, and while 56% of respondents supported regular discussion of them during meetings, only 32% indicated that they were routinely reviewed. Updating the literature more frequently, implementing a formal grading system for the evidence, and incorporating clinical care pathways were the most frequently cited methods to improve the CPGs. Tumor board meetings are beneficial to the treatment planning process for neuro-oncology patients.

  15. Artemis: Results of the engineering feasibility study

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Information is given in viewgraph form for the Engineering Feasibility Study of the Artemis Project, a plan to establish a permanent base on the Moon. Topics covered include the Common Lunar Lander (CLL), lunar lander engineering study results, lunar lander trajectory analysis, lunar lander conceptual design and mass properties, the lunar lander communication subsystem design, and product assurance.

  16. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., linguistics, or cultural differences; (4) Isolation; (5) Presence of alternate education sources; (6) Proposed... Director of Education will issue detailed guidelines for conducting and analyzing the feasibility studies.... Within thirty (30) days of the hearing, the Assistant Secretary shall issue a written ruling...

  17. 7 CFR 4279.250 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Feasibility studies. 4279.250 Section 4279.250 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GUARANTEED LOANMAKING Biorefinery Assistance...

  18. 7 CFR 4279.250 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Feasibility studies. 4279.250 Section 4279.250 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GUARANTEED LOANMAKING Biorefinery Assistance...

  19. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION GRANTS TO TRIBALLY CONTROLLED COMMUNITY COLLEGES AND NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants under § 41.8 of this subpart may be made to a Community College only after a positive determination...

  20. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION GRANTS TO TRIBALLY CONTROLLED COMMUNITY COLLEGES AND NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants under § 41.8 of this subpart may be made to a Community College only after a positive determination...

  1. D-21B RBCC Modification Feasibility Study

    NASA Technical Reports Server (NTRS)

    1999-01-01

    This report presents a feasibility study on the modifications required to re-engine the Lockheed D-21 Drone for use as a NASA RBCC engine. An introduction, background information, engine configuration and performance, propulsion system integration, loads/thermal analysis, avionics/systems, flight test results, costs and work schedule, and some conclusions are presented.

  2. Adult Skills Training Center: Feasibility Study.

    ERIC Educational Resources Information Center

    Skalski, John M.; Baratta, Anthony N.

    A 4-phase project, this study was conducted to determine the feasibility of a bilingual vocational skill training program for out-of-school youth and adults of the Perth Amboy Hispanic community. Sampled were 494 out-of-school youth and adults in the area. Findings include: (1) There is a significant need for an adult vocational skills training…

  3. Pawnee-Divernon Educational Feasibility Study.

    ERIC Educational Resources Information Center

    Myers, Dean L., Ed.; And Others

    The feasibility study concerns itself with the possible school district reorganization for the Pawnee and Divernon School Districts. Citizens' committees, boards of education, administration, and teachers provided consultant information about their schools. The evaluation committees, comprised of citizens from the Pawnee and Divernon School…

  4. Flow Liner Slot Edge Replication Feasibility Study

    NASA Technical Reports Server (NTRS)

    Newman, John A.; Willard, Scott A.; Smith, Stephen W.; Piascik, Robert S.

    2006-01-01

    Surface replication has been proposed as a method for crack detection in space shuttle main engine flowliner slots. The results of a feasibility study show that examination of surface replicas with a scanning electron microscope can result in the detection of cracks as small as 0.005 inch, and surface flaws as small as 0.001 inch, for the flowliner material.

  5. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 14 2011-01-01 2011-01-01 false Feasibility studies. 1980.442 Section 1980.442 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE...

  6. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 14 2013-01-01 2013-01-01 false Feasibility studies. 1980.442 Section 1980.442 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE...

  7. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 14 2014-01-01 2014-01-01 false Feasibility studies. 1980.442 Section 1980.442 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE...

  8. Renewable Energy Feasibility Study Final Report

    SciTech Connect

    Rooney, Tim

    2013-10-30

    The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to assess the feasibility of solar photovoltaic (PV) installations. A solar energy project could provide a number of benefits to the Community in terms of potential future energy savings, increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a solar project’s overall feasibility, including: Technical appropriateness; Solar resource characteristics and expected system performance; Levelized cost of electricity (LCOE) economic assessment. The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to prepare a biomass resource assessment study and evaluate the feasibility of a bioenergy project on Community land. A biomass project could provide a number of benefits to the Community in terms of increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a biomass project’s overall feasibility, including: Resource analysis and costs; Identification of potential bioenergy projects; Technical and economic (levelized cost of energy) modeling for selected project configuration.

  9. Numerical aerodynamic simulation facility feasibility study

    NASA Technical Reports Server (NTRS)

    1979-01-01

    There were three major issues examined in the feasibility study. First, the ability of the proposed system architecture to support the anticipated workload was evaluated. Second, the throughput of the computational engine (the flow model processor) was studied using real application programs. Third, the availability reliability, and maintainability of the system were modeled. The evaluations were based on the baseline systems. The results show that the implementation of the Numerical Aerodynamic Simulation Facility, in the form considered, would indeed be a feasible project with an acceptable level of risk. The technology required (both hardware and software) either already exists or, in the case of a few parts, is expected to be announced this year. Facets of the work described include the hardware configuration, software, user language, and fault tolerance.

  10. Aircraft towing feasibility study. Final report

    SciTech Connect

    Not Available

    1980-09-01

    Energy costs and availability are major concerns in most parts of the world. Many ways of increasing energy supply and reducing consumption are being proposed and investigated. One that holds considerable promise is the extended towing of aircraft between airport runways and terminal gate areas with engines shut down. This study provides a preliminary assessment of the constraints on and feasibility of extended aircraft towing. Past aircraft towing experience and the state-of-the-art in towing equipment are reviewed. Safety and operational concerns associated with aircraft towing are identified, and the benefits and costs of implementing aircraft towing at 20 major US airports are analyzed. It was concluded that extended aircraft towing is technically feasible and that substantial reductions in aircraft fuel consumption and air pollutant emissions can be achieved through its implementation. It was also concluded that, although capital and operating costs associated with towing would be increased, net savings could generally be attained at these airports. Because of the lack of past experience and the necessity of proving the cost effectiveness of the towing concept, a demonstration of the feasibility of large-scale aircraft towing is necessary. The study evaluates the suitability of the 20 study airports as potential demonstration sites and makes recommendations for the first demonstration project.

  11. Feasibility studies of aquifer thermal energy storage

    SciTech Connect

    Hall, S. H.

    1993-01-01

    Determining the feasibility of using aquifer thermal energy storage (ATES) for a particular heating or cooling application is an interdisciplinary effort, requiring (at a minimum) expertise in engineering and hydrology. The feasibility study should proceed in two distinct stages. The first stage, which is limited in scope and detail, is intended to show if an ATES system is technically and economically suited to the application. Focus of this preliminary investigation is on revealing the existence of factors that might weigh heavily against the use of ATES methods, and, in the absence of such factors, on choosing a suitable scale for the ATES plant and well field. The results of the preliminary investigation are used to determine if more detailed investigation--including field studies--are justified, and to facilitate comparing the advantages of ATES to those of other means of providing heating or cooling. The second stage of the feasibility study focuses on detailed aquifer characterization, refinement of engineering design and cost estimates, and economic and environmental risk analysis. The results of this investigation, if favorable, will be used to justify the expense of constructing the ATES system.

  12. COLD-SAT feasibility study safety analysis

    NASA Technical Reports Server (NTRS)

    Mchenry, Steven T.; Yost, James M.

    1991-01-01

    The Cryogenic On-orbit Liquid Depot-Storage, Acquisition, and Transfer (COLD-SAT) satellite presents some unique safety issues. The feasibility study conducted at NASA-Lewis desired a systems safety program that would be involved from the initial design in order to eliminate and/or control the inherent hazards. Because of this, a hazards analysis method was needed that: (1) identified issues that needed to be addressed for a feasibility assessment; and (2) identified all potential hazards that would need to be controlled and/or eliminated during the detailed design phases. The developed analysis method is presented as well as the results generated for the COLD-SAT system.

  13. The Gemini Instrument Feasibilities Studies project

    NASA Astrophysics Data System (ADS)

    Hibon, Pascale; Goodsell, Stephen J.; Hardie, Kayla

    2015-01-01

    The Gemini Instrument Feasibilities Studies (GIFS) project is part of a program that will provide a number of community-created science-driven instrumentation design study reports and presentations to the observatory, conforming to a number of desired principles.By the time of the AAS, Gemini will have received a number of proposals and will be evaluating them shortly afterwards with the expectation of placing 3 or more feasibility study contracts based on a facility instrument costing between USD 8,000,000 and USD 12,000,000. These instrument studies will provide synergies with new capabilities coming online (e.g. LSST, JWST, ALMA, etc)Following the project, Gemini together with the Gemini Science and Technical Advisory Committee (STAC) and input from the wider community will decide on the top-level instrument requirements for the next facility instrument (Gen4#3) and launch a targeted Request for Proposals to design, build, test and deliver a suitable instrument. Gemini expects to release an RfP for Gen4#3 in Q4 2015.Each feasibility study will include fully developed science case(s), optical, mechanical, electronic and software design elements at the conceptual level as needed to demonstrate the technical viability. In particular, each design study will thoroughly identify and mitigate key risks.Each study team will present a status summary presentation at the 2015 Meeting on the Science and Future of Gemini held in Toronto in June 2015. The final GIFS reports and presentations are expected in Sept 2015.We will discuss the status of GIFS and the currently plans for Gen4#3.

  14. Exciting New Advances in Neuro-Oncology

    PubMed Central

    Van Meir, Erwin G.; Hadjipanayis, Costas G.; Norden, Andrew D.; Shu, Hui-Kuo; Wen, Patrick Y.; Olson, Jeffrey J.

    2010-01-01

    Malignant gliomas are the most common and deadly brain tumors. Nevertheless, survival for patients with glioblastoma, the most aggressive glioma, although individually variable, has improved from an average of 10 months to 14 months after diagnosis in the last 5 years due to improvements in the standard of care. Radiotherapy has been of key importance to the treatment of these lesions for decades, and the ability to focus the beam and tailor it to the irregular contours of brain tumors and minimize the dose to nearby critical structures with intensity-modulated or image-guided techniques has improved greatly. Temozolomide, an alkylating agent with simple oral administration and a favorable toxicity profile, is used in conjunction with and after radiotherapy. Newer surgical techniques, such as fluorescence-guided resection and neuroendoscopic approaches, have become important in the management of malignant gliomas. Furthermore, new discoveries are being made in basic and translational research, which are likely to improve this situation further in the next 10 years. These include agents that block 1 or more of the disordered tumor proliferation signaling pathways, and that overcome resistance to already existing treatments. Targeted therapies such as antiangiogenic therapy with antivascular endothelial growth factor antibodies (bevacizumab) are finding their way into clinical practice. Large-scale research efforts are ongoing to provide a comprehensive understanding of all the genetic alterations and gene expression changes underlying glioma formation. These have already refined the classification of glioblastoma into 4 distinct molecular entities that may lead to different treatment regimens. The role of cancer stem-like cells is another area of active investigation. There is definite hope that by 2020, new cocktails of drugs will be available to target the key molecular pathways involved in gliomas and reduce their mortality and morbidity, a positive development for patients, their families, and medical professionals alike. PMID:20445000

  15. Neuro-oncology biotech industry progress report.

    PubMed

    Chakraborty, Shamik; Bodhinayake, Imithri; Chiluwal, Amrit; Langer, David J; Ruggieri, Rosamaria; Symons, Marc; Boockvar, John A

    2016-05-01

    The Brain Tumor Biotech Center at the Feinstein Institute for Medical Research, in collaboration with Voices Against Brain Cancer hosted The Brain Tumor Biotech Summit at in New York City in June 2015. The focus was once again on fostering collaboration between neuro-oncologist, neurosurgeons, scientists, leaders from biotechnology and pharmaceutical industries, and members of the financial community. The summit highlighted the recent advances in the treatment of brain tumor, and specifically focused on targeting of stem cells and EGFR, use of prophage and immunostimulatory vaccines, retroviral vectors for drug delivery, biologic prodrug, Cesium brachytherapy, and use of electric field to disrupt tumor cell proliferation. This article summarizes the current progress in brain tumor research as presented at 2015 The Brain Tumor Biotech Summit.

  16. Crew emergency return vehicle autoland feasibility study

    NASA Technical Reports Server (NTRS)

    Bossi, J. A.; Langehough, M. A.; Lee, K. L.

    1989-01-01

    The crew emergency return vehicle (CERV) autoland feasibility study focused on determining the controllability of the NASA Langley high lift over drag CERV for performing an automatic landing at a prescribed runway. An autoland system was developed using integral linear quadratic Gaussian (LQG) design techniques. The design was verified using a nonlinear 6 DOF simulation. Simulation results demonstrate that the CERV configuration is a very flyable configuration for performing an autoland mission. Adequate stability and control was demonstrated for wind turbulence and wind shear. Control surface actuator requirements were developed.

  17. Feasibility study of a nuclear exciton laser

    NASA Astrophysics Data System (ADS)

    ten Brinke, Nicolai; Schützhold, Ralf; Habs, Dietrich

    2013-05-01

    Nuclear excitons known from Mössbauer spectroscopy describe coherent excitations of a large number of nuclei—analogous to Dicke states (or Dicke super-radiance) in quantum optics. In this paper, we study the possibility of constructing a laser based on these coherent excitations. In contrast to the free-electron laser (in its usual design), such a device would be based on stimulated emission and thus might offer certain advantages, e.g., regarding energy-momentum accuracy. Unfortunately, inserting realistic parameters, the window of operability is probably not open (yet) to present-day technology; but our design should be feasible in the UV regime, for example.

  18. Advanced Space Suit Insulation Feasibility Study

    NASA Technical Reports Server (NTRS)

    Trevino, Luis A.; Orndoff, Evelyne S.

    2000-01-01

    For planetary applications, the space suit insulation has unique requirements because it must perform in a dynamic mode to protect humans in the harsh dust, pressure and temperature environments. Since the presence of a gaseous planetary atmosphere adds significant thermal conductance to the suit insulation, the current multi-layer flexible insulation designed for vacuum applications is not suitable in reduced pressure planetary environments such as that of Mars. Therefore a feasibility study has been conducted at NASA to identify the most promising insulation concepts that can be developed to provide an acceptable suit insulation. Insulation concepts surveyed include foams, microspheres, microfibers, and vacuum jackets. The feasibility study includes a literature survey of potential concepts, an evaluation of test results for initial insulation concepts, and a development philosophy to be pursued as a result of the initial testing and conceptual surveys. The recommended focus is on microfibers due to the versatility of fiber structure configurations, the wide choice of fiber materials available, the maturity of the fiber processing industry, and past experience with fibers in insulation applications

  19. Feasibility study for convertible engine torque converter

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The feasibility study has shown that a dump/fill type torque converter has excellent potential for the convertible fan/shaft engine. The torque converter space requirement permits internal housing within the normal flow path of a turbofan engine at acceptable engine weight. The unit permits operating the engine in the turboshaft mode by decoupling the fan. To convert to turbofan mode, the torque converter overdrive capability bring the fan speed up to the power turbine speed to permit engagement of a mechanical lockup device when the shaft speed are synchronized. The conversion to turbofan mode can be made without drop of power turbine speed in less than 10 sec. Total thrust delivered to the aircraft by the proprotor, fan, and engine during tansient can be controlled to prevent loss of air speed or altitude. Heat rejection to the oil is low, and additional oil cooling capacity is not required. The turbofan engine aerodynamic design is basically uncompromised by convertibility and allows proper fan design for quiet and efficient cruise operation. Although the results of the feasibility study are exceedingly encouraging, it must be noted that they are based on extrapolation of limited existing data on torque converters. A component test program with three trial torque converter designs and concurrent computer modeling for fluid flow, stress, and dynamics, updated with test results from each unit, is recommended.

  20. NASA CPAS Drogue Textile Riser Feasibility Study

    NASA Technical Reports Server (NTRS)

    Hennings, Elsa J.; Petersen, Michael L.; Anderson, Brian; Johnson, Brian

    2015-01-01

    Steel cable was chosen for the lower end of the drogue and main parachute risers on NASA's Orion Multi Purpose Crew Vehicle Parachute Assembly System (CPAS) to protect the risers from extreme temperatures and abrasion should they contact the crew module during deployment, as was done for Apollo. Due to the weight and deployment complexity inherent in steel, there was significant interest in the possibility of substituting textile for steel for the drogue and main parachute risers. However, textile risers could be damaged when subjected to high temperature and abrasion. Investigations were consequently performed by a subset of the authors to determine whether sacrificial, non-load-bearing textile riser covers could be developed to mitigate the thermal and abrasion concerns. Multiple material combinations were tested, resulting in a cover design capable of protecting the riser against severe riser/crew module contact interactions. A feasibility study was then conducted to evaluate the performance of the textile drogue riser cover in relevant abrasive environments. This paper describes the testing performed and documents the results of this feasibility study.

  1. Battery energy storage market feasibility study

    SciTech Connect

    Kraft, S.; Akhil, A.

    1997-07-01

    Under the sponsorship of the Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed energy storage as an important enabling technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  2. Aleutian Pribilof Islands Wind Energy Feasibility Study

    SciTech Connect

    Bruce A. Wright

    2012-03-27

    Under this project, the Aleutian Pribilof Islands Association (APIA) conducted wind feasibility studies for Adak, False Pass, Nikolski, Sand Point and St. George. The DOE funds were also be used to continue APIA's role as project coordinator, to expand the communication network quality between all participants and with other wind interest groups in the state and to provide continued education and training opportunities for regional participants. This DOE project began 09/01/2005. We completed the economic and technical feasibility studies for Adak. These were funded by the Alaska Energy Authority. Both wind and hydro appear to be viable renewable energy options for Adak. In False Pass the wind resource is generally good but the site has high turbulence. This would require special care with turbine selection and operations. False Pass may be more suitable for a tidal project. APIA is funded to complete a False Pass tidal feasibility study in 2012. Nikolski has superb potential for wind power development with Class 7 wind power density, moderate wind shear, bi-directional winds and low turbulence. APIA secured nearly $1M from the United States Department of Agriculture Rural Utilities Service Assistance to Rural Communities with Extremely High Energy Costs to install a 65kW wind turbine. The measured average power density and wind speed at Sand Point measured at 20m (66ft), are 424 W/m2 and 6.7 m/s (14.9 mph) respectively. Two 500kW Vestas turbines were installed and when fully integrated in 2012 are expected to provide a cost effective and clean source of electricity, reduce overall diesel fuel consumption estimated at 130,000 gallons/year and decrease air emissions associated with the consumption of diesel fuel. St. George Island has a Class 7 wind resource, which is superior for wind power development. The current strategy, led by Alaska Energy Authority, is to upgrade the St. George electrical distribution system and power plant. Avian studies in Nikolski and

  3. Feasibility Study for Paragon - Bisti Solar Ranch

    SciTech Connect

    Benally, Thomas

    2015-06-01

    The Navajo Hopi Land Commission Office (NHLCO) and Navajo Nation (NN) plan to develop renewable energy (RE) projects on the Paragon-Bisti Ranch (PBR) lands, set aside under the Navajo Hopi Land Settlement Act (NHLSA) for the benefit of Relocatees. This feasibility study (FS), which was funded under a grant from DOE’s Tribal Energy Program (TEP), was prepared in order to explore the development of the 22,000-acre PBR in northwestern New Mexico for solar energy facilities. Topics covered include: • Site Selection • Analysis of RE, and a Preliminary Design • Transmission, Interconnection Concerns and Export Markets • Financial and Economic Analysis • Environmental Study • Socioeconomic and Cultural Factors • Next Steps.

  4. Lunar Wireless Power Transfer Feasibility Study

    SciTech Connect

    Sheldon Freid, et al.

    2008-06-01

    This study examines the feasibility of a multi-kilowatt wireless radio frequency (RF) power system to transfer power between lunar base facilities. Initial analyses, show that wireless power transfer (WPT) systems can be more efficient and less expensive than traditional wired approaches for certain lunar and terrestrial applications. The study includes evaluations of the fundamental limitations of lunar WPT systems, the interrelationships of possible operational parameters, and a baseline design approach for a notionial system that could be used in the near future to power remote facilities at a lunar base. Our notional system includes state-of-the-art photovoltaics (PVs), high-efficiency microwave transmitters, low-mass large-aperture high-power transmit antennas, high-efficiency large-area rectenna receiving arrays, and reconfigurable DC combining circuitry.

  5. Exoskeleton for Soldier Enhancement Systems Feasibility Study

    SciTech Connect

    Jansen, J.F.

    2000-09-28

    The development of a successful exoskeleton for human performance augmentation (EHPA) will require a multi-disciplinary systems approach based upon sound biomechanics, power generation and actuation systems, controls technology, and operator interfaces. The ability to integrate key components into a system that enhances performance without impeding operator mobility is essential. The purpose of this study and report are to address the issue of feasibility of building a fieldable EHPA. Previous efforts, while demonstrating progress and enhancing knowledge, have not approached the level required for a fully functional, fieldable system. It is doubtless that the technologies required for a successful exoskeleton have advanced, and some of them significantly. The question to be addressed in this report is have they advanced to the point of making a system feasible in the next three to five years? In this study, the key technologies required to successfully build an exoskeleton have been examined. The primary focus has been on the key technologies of power sources, actuators, and controls. Power sources, including internal combustion engines, fuel cells, batteries, super capacitors, and hybrid sources have been investigated and compared with respect to the exoskeleton application. Both conventional and non-conventional actuator technologies that could impact EHPA have been assessed. In addition to the current state of the art of actuators, the potential for near-term improvements using non-conventional actuators has also been addressed. Controls strategies, and their implication to the design approach, and the exoskeleton to soldier interface have also been investigated. In addition to these key subsystems and technologies, this report addresses technical concepts and issues relating to an integrated design. A recommended approach, based on the results of the study is also presented.

  6. Bin Set 1 Calcine Retrieval Feasibility Study

    SciTech Connect

    R. D. Adams; S. M. Berry; K. J. Galloway; T. A. Langenwalter; D. A. Lopez; C. M. Noakes; H. K. Peterson; M. I. Pope; R. J. Turk

    1999-10-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase.

  7. 7 CFR 1737.70 - Description of feasibility study.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... information supplied with the completed loan applications (see 7 CFR 1737.21 and 1737.22). (h) When, in RUS's... 7 Agriculture 11 2014-01-01 2014-01-01 false Description of feasibility study. 1737.70 Section... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study. (a)...

  8. 7 CFR 1737.70 - Description of feasibility study.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... information supplied with the completed loan applications (see 7 CFR 1737.21 and 1737.22). (h) When, in RUS's... 7 Agriculture 11 2012-01-01 2012-01-01 false Description of feasibility study. 1737.70 Section... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study. (a)...

  9. 7 CFR 1737.70 - Description of feasibility study.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... information supplied with the completed loan applications (see 7 CFR 1737.21 and 1737.22). (h) When, in RUS's... 7 Agriculture 11 2013-01-01 2013-01-01 false Description of feasibility study. 1737.70 Section... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study. (a)...

  10. 7 CFR 1737.70 - Description of feasibility study

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... information supplied with the completed loan applications (see 7 CFR 1737.21 and 1737.22). (h) When, in RUS's... 7 Agriculture 11 2011-01-01 2011-01-01 false Description of feasibility study 1737.70 Section 1737... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study (a)...

  11. BIOMASS-TO-ENERGY FEASIBILITY STUDY

    SciTech Connect

    Cecil T. Massie

    2002-09-03

    The purpose of this study was to assess the economic and technical feasibility of producing electricity and thermal energy from biomass by gasification. For an economic model we chose a large barley malting facility operated by Rahr Malting Co. in Shakopee, Minnesota. This plant provides an excellent backdrop for this study because it has both large electrical loads and thermal loads that allowed us to consider a wide range of sizes and technical options. In the end, eleven scenarios were considered ranging from 3.1 megawatts (MWe) to 19.8 MWe. By locating the gasification and generation at an agricultural product processing plant with large electrical and thermal loads, the expectation was that some of the limitations of stand-alone biomass power plants would be overcome. In addition, since the process itself created significant volumes of low value biomass, the hope was that most of the biomass gathering and transport issues would be handled as well. The development of low-BTU gas turbines is expected to fill a niche between the upper limit of multiple spark ignited engine set systems around 5 MWe and the minimum reasonable scale for steam turbine systems around 10 MWe.

  12. Feasibility study for long lifetime helium dewar

    NASA Technical Reports Server (NTRS)

    Parmley, R. T.

    1981-01-01

    A feasible concept for a launchable three year lifetime helium dewar was investigted. Current helium dewar designs were examined to see where the largest potential reductions in parasitic heat loads can be made. The study was also devoted to examining support concepts. The support concept chosen, a passive orbital disconnect strut (PODS), has an orbital support conductance that is lower by more than an order of magnitude over current tension band supports. This lower support conductance cuts the total dewar weight in half for the same three year life time requirements. Effort was also concentrated on efficient wire feed through designs and vapor cooling of the multilayer insulation, supports, wire feed throughs and plumbing penetrations. A single stage helium dewar vs. dual stage dewars with a guard cryogen of nitrogen or neon was examined. The single stage dewar concept was selected. Different support concepts were analyzed from which the PODS support concepts was chosen. A preliminary design of the dewar was thermally and structurally analyzed and laid out including system weights, thermal performance and performance sensitivities.

  13. Pinellas Plant feasibility study. Final report

    SciTech Connect

    1994-09-01

    The Pinellas Plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. In September 1990, the Department of Health and Rehabilitative Services (HRS) entered into an agreement with DOE to independently examine environmental monitoring data from the plant and health data from Pinellas County to determine if an epidemiological study is technically feasible to measure possible off-site health effects from ionizing radiation. Through normal plant operations, some radioactive materials have been released to the environment. Eighty percent of the total plant releases of 107,707 curies occurred in the early years of plant operation (1957--1960). The primary materials released were tritium gas, tritium oxide and krypton-85. Environmental monitoring for radioactive releases from the plant has been done regularly since 1975. The US Public Health Service Centers for Disease Control and Prevention (CDC), in assisting HRS, has determined that sufficient radiological data exist by which a dose reconstruction can be done. A dose reconstruction can provide an estimate of how much radiological exposure someone living in the vicinity of the Pinellas Plant may have suffered from environmental releases.

  14. Ultrasonic flow imaging system: A feasibility study

    SciTech Connect

    Sheen, S.H.; Lawrence, W.P.; Chien, H.T.; Raptis, A.C.

    1991-09-01

    This report examines the feasibility and potential problems in developing a real-time ultrasonic flow imaging instrument for on-line monitoring of mixed-phased flows such as coal slurries. State-of-the-art ultrasonic imaging techniques are assessed for this application. Reflection and diffraction tomographies are proposed for further development, including image-reconstruction algorithms and parallel processing systems. A conventional ultrasonic C-scan technique is used to demonstrate the feasibility of imaging the particle motion in a solid/water flow. 13 refs., 11 figs.

  15. Ionic alkali halide XUV laser feasibility study

    SciTech Connect

    Yang, T.T.; Gylys, V.T.; Bower, R.D.; Harris, D.G.; Blauer, J.A.; Turner, C.E.; Hindy, R.N.

    1989-11-10

    The objective of this work is to assess the feasibility of a select set of ionic alkali halide XUV laser concepts by obtaining the relevant kinetic and spectroscopic parameters required for a proof-of-principle and conceptual design. The proposed lasers operate in the 80--200 nm spectral region and do not require input from outside radiation sources for their operation. Frequency up-conversion and frequency mixing techniques and therefore not considered in the work to be described. An experimental and theoretical study of a new type of laser operating in the extreme ultraviolet wavelength region has been conducted. The lasing species are singly ionized alkali halide molecules such as Rb{sup 2+}F{sub {minus}}, Rb{sup 2+}Br{sup {minus}} and Cs{sup 2+}F{sup {minus}}. These species are similar in electronic structure to the rare gas halide excimers, such as XeF and Krf, except that the ionic molecules emit at wavelengths of 80--200 nm, much shorter than the conventional rare-gas halide excimer laser. The radiative lifetime of these molecules are typically near 1 ns, which is about an order of magnitude shorter than that for rare-gas halide systems. The values of the cross section for stimulated emission are on the order of 1 {times} 10{sup {minus}16}cm{sup 2}. Because of the fundamental similarity to existing UV lasers, these systems show promise as a high power, efficient XUV lasers. 55 refs., 50 figs., 5 tabs.

  16. Feasibility Study on Lunar and Mars Exploration

    NASA Astrophysics Data System (ADS)

    Mori, Hidehiko; Takazawa, Yoshisada; Kaneko, Yutaka; Kawazoe, Takeshi; Takano, Yutaka; Namura, Eijiro

    1996-10-01

    This technical memorandum summarizes the results of an in-house study on lunar and Mars drone explorations - observation, landing and mobile explorations and sample returns for lunar and Mars respectively. So far, lunar and planet explorations have been primarily performed by the United States and the Soviet Union. ISAS and ESA have also contributed to some extent. The main purpose has been scientific exploration. There are some arguments that lunar and planet explorations should be performed for scientific purposes and the exploitation of them is not necessary. However, most scientific research involve the existence and survival of humankind, so it is not the fact that they cannot be organized from the side of exploitation. Especially, if NASDA makes approaches to lunar and Mars exploration, it should inevitably embrace exploitation plans. In this preface we provide the outline of lunar and Mars exploitation scenarios set up as a premise of the review on lunar and Mars unmanned exploration plans. Various reviews have been performed on whether the Moon or Mars would allow for human activities or survival. Among them, He mill, the solar powered satellite material mill and construction project of relay station to Mars as well as Mars teraforming plan have important issues. These projects have not yet become feasible because their expected investments are too large to make them practical. However, the present time seems the most appropriate to get with lunar and Mars exploitation projects under international cooperation since the realization of a space station is imminent and the international cooperation is being created with the participation of Russia. The international space station project will be continued until the year 2015. The post project has not yet been decided. Therefore, we expect that Japan would propose two successive projects, one is to construct an orbital service station combining manned abilities of the station and orbital service system and the

  17. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  18. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  19. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  20. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  1. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  2. F-8 oblique wing structural feasibility study

    NASA Technical Reports Server (NTRS)

    Koltko, E.; Katz, A.; Bell, M. A.; Smith, W. D.; Lauridia, R.; Overstreet, C. T.; Klapprott, C.; Orr, T. F.; Jobe, C. L.; Wyatt, F. G.

    1975-01-01

    The feasibility of fitting a rotating oblique wing on an F-8 aircraft to produce a full scale manned prototype capable of operating in the transonic and supersonic speed range was investigated. The strength, aeroelasticity, and fatigue life of such a prototype are analyzed. Concepts are developed for a new wing, a pivot, a skewing mechanism, control systems that operate through the pivot, and a wing support assembly that attaches in the F-8 wing cavity. The modification of the two-place NTF-8A aircraft to the oblique wing configuration is discussed.

  3. Distribution transformer BIL reduction feasibility study

    SciTech Connect

    Baranowski, J.F.; Goedde, G.L. . Thomas A. Edison Technical Center)

    1990-01-01

    This paper summarizes an investigation into the feasibility of reducing basic insulation levels (BIL) for oil-immersed distribution transformers. A projected market makeup of popular kVA and system voltages was determined for the 5 kV to 35 kV insulation classes of pole-type and pad-mount distribution transformers. Reduced BIL design cases were used to determine the impact on the transformer's design and performance. The final results provide both industry cost and total owning cost savings.

  4. Feasibility Study & Design of Brightfield Solar Farm

    SciTech Connect

    Law, Susan

    2014-09-28

    This Congressionally Directed Project originally provided funds to the Township of Lower Providence, Pennsylvania for the purpose of investigating the potential for a renewable energy generation facility to make beneficial reuse of a closed landfill located within the Township, known as Moyer Landfill. Early in the course of the project, it was determined through collaboration and discussion with DOE to alter the scope of the project to include a feasibility assessment of a landfill solar project, as well as to construct a demonstration solar project at the municipal facilities to provide an educational and community outreach opportunity for the Township to offer regarding solar photovoltaic (“PV”) electricity generation.

  5. Feasibility Study of Thin Film Thermocouple Piles

    NASA Technical Reports Server (NTRS)

    Sisk, R. C.

    2001-01-01

    Historically, thermopile detectors, generators, and refrigerators based on bulk materials have been used to measure temperature, generate power for spacecraft, and cool sensors for scientific investigations. New potential uses of small, low-power, thin film thermopiles are in the area of microelectromechanical systems since power requirements decrease as electrical and mechanical machines shrink in size. In this research activity, thin film thermopile devices are fabricated utilizing radio frequency sputter coating and photoresist lift-off techniques. Electrical characterizations are performed on two designs in order to investigate the feasibility of generating small amounts of power, utilizing any available waste heat as the energy source.

  6. 7 CFR 4280.178 - Scoring feasibility study grant applications.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.178 Scoring... needs. (2) Energy generation. 15 points will be awarded if the proposed renewable energy system is... 7 Agriculture 15 2014-01-01 2014-01-01 false Scoring feasibility study grant applications....

  7. 7 CFR 4280.182 - Servicing feasibility study grants.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... CFR part 1951, subparts E and O; and paragraphs (a) through (n) of this section. (a) Inspections... 7 Agriculture 15 2012-01-01 2012-01-01 false Servicing feasibility study grants. 4280.182 Section... America Program General Renewable Energy System Feasibility Study Grants § 4280.182 Servicing...

  8. 7 CFR 4280.182 - Servicing feasibility study grants.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CFR part 1951, subparts E and O; and paragraphs (a) through (n) of this section. (a) Inspections... 7 Agriculture 15 2014-01-01 2014-01-01 false Servicing feasibility study grants. 4280.182 Section... America Program General Renewable Energy System Feasibility Study Grants § 4280.182 Servicing...

  9. 7 CFR 4280.182 - Servicing feasibility study grants.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CFR part 1951, subparts E and O; and paragraphs (a) through (n) of this section. (a) Inspections... 7 Agriculture 15 2013-01-01 2013-01-01 false Servicing feasibility study grants. 4280.182 Section... America Program General Renewable Energy System Feasibility Study Grants § 4280.182 Servicing...

  10. Feasibility study of the AOSTA experimental campaign

    NASA Astrophysics Data System (ADS)

    Carta, M.; Blaise, P.; Bethaz, C.; Boccia, F.; Fabrizio, V.; Geslot, B.; Grossi, A.; Gruel, A.

    2016-03-01

    The reduction of the nuclear waste is one of the most important nuclear issues. The high radiotoxicity of the spent fuel is due to plutonium and some minor actinides (MAs) such as neptunium, americium and curium, above all. One way to reduce their hazard is to destroy by fission MAs in appropriate nuclear reactors. To allow the MAs destruction an important effort have been done on the nuclear data due to the poor knowledge in this field. In the framework of one of the NEA Expert Group on Integral Experiments for Minor Actinide Management an analysis of the feasibility of MAs irradiation campaign in the TAPIRO fast research reactor is carried out. This paper provides preliminary results obtained by calculations modelling the irradiation, in different TAPIRO irradiation channels, of some CEA samples coming from the French experimental campaign OSMOSE, loaded with different contents of MAs, in order to access, through particular peak spectrometry, to their capture cross section. On the basis of neutron transport calculation results, obtained by both deterministic and Monte Carlo methods, an estimate of the irradiated samples counting levels from the AOSTA (Activation of OSMOSE Samples in TAPIRO) experimental campaign is provided.

  11. STS propellant densification feasibility study data book

    NASA Technical Reports Server (NTRS)

    Fazah, M. M.

    1994-01-01

    The feasibility of using densification or subcooling with respect to standard temperature propellants on the Space Transportation System (STS) in order to achieve a payload gain is discussed in this report. The objective is to determine the magnitude of the payload gain and to identify any system impacts to the space shuttle on either flight systems or ground systems. Results show that a payload benefit can be obtained by subcooling the liquid hydrogen (LH2) from a nominal temperature of 36.4 R to 28.5 R and by subcooling the liquid oxygen (LO2) from a nominal temperature of 164 R to either 132.1 R or 141.4 R. When the propellants are subcooled to 28.5 R and 132.1 R for the LH2 and LO2, respectively, a maximum payload gain of 7,324 lb can be achieved, and when the propellants are subcooled to 28.5 R and 141.5 R for the LH2 and LO2, respectively, a maximum payload gain of 6,841 lb can be achieved. If the LH2 is subcooled to 28.5 R while the LH2 and LO2 remains at the nominal conditions, a maximum payload gain of 1,303 lb can be achieved.

  12. Solid waste electrical generating feasibility study

    SciTech Connect

    Not Available

    1982-05-01

    The feasibility of recommissioning the existing 3 megawatt steam turbine driven electrical generator of the Municipal Utilities of Valley City, North Dakota, using steam generated in a new facility from the incineration of municipal solid waste generated in the area is examined. It is concluded that (1) there is sufficient municipal solid waste that can be obtained from Valley City, Moorhead and Jamestown (and/or West Fargo) to fuel the plant; (2) the seasonal fluctuation in the amounts of municipal solid waste indicates that a supplementary source of fuel for use during winter would increase plant efficiency; (3) the probable capital cost of the project will be $3,590,000.00; (4) the cost of production of electricity could range from 3.72 cents/kWh to 4.90 cents/kWh, depending on the construction costs, interest rate, lifetime of the project, availability for the plant and steam produced per ton of municipal solid waste; (5) there is no compelling reason why the tertiary cell of the sewage lagoon, cannot be used for cooling water; (6) the State Health Department is ambivalent toward the project; and (7) the public perception of the project is positive. 92 references.

  13. Co-combustion feasibility study. Final report

    SciTech Connect

    Handcock, D.J.

    1995-01-01

    This report investigates the technical and economic feasibility of co-combusting municipal sewage sludge produced by the Saratoga County Sewer District No. 1 with paper mill sludge produced by the Cottrell Paper Company, Encore Paper Company, International Paper Company, Mohawk Paper Mills, and TAGSONS Papers at the Saratoga County Sewer District No. 1`s secondary wastewater treatment plant and recovering any available energy products. The co-combustion facility would consist of sludge and wood chip storage and conveying systems, belt filter presses, screw presses, fluidized-bed incinerators, venturi scrubbers and tray cooling systems, ash dewatering facilities, heat recovery steam generators, gas-fired steam superheaters, and a back-pressure steam turbine system. Clean waste wood chips would be used as an auxiliary fuel in the fluidized-bed incinerators. It is recommended that the ash produced by the proposed facility be beneficially used, potentially as a raw material in the manufacture of cement and/or as an interim barrier layer in landfills.

  14. Washoe Tribe Alternative Energy Feasibility Study Final Report

    SciTech Connect

    Johnson, Jennifer

    2014-10-01

    The Washoe Tribe of Nevada and California was awarded funding to complete the Washoe Tribe Alternative Energy Feasibility Study project. The main goal of the project was to complete an alternative energy feasibility study. This study was completed to evaluate “the potential for development of a variety of renewable energy projects and to conduct an alternative energy feasibility study that determines which alternative energy resources have the greatest economic opportunity for the Tribe, while respecting cultural and environmental values” (Baker-Tilly, 2014). The study concluded that distributed generation solar projects are the best option for renewable energy development and asset ownership for the Washoe Tribe. Concentrating solar projects, utility scale wind projects, geothermal, and biomass resource projects were also evaluated during the study and it was determined that these alternatives would not be feasible at this time.

  15. Final Report: Feasibility Study of Biomass in Snohomish County, Washington

    SciTech Connect

    Daryl Williams; Ray Clark

    2005-01-31

    This report and its attachments summarizes the results of a unique tribal-farmer cooperative study to evaluate the feasibility of building one or more regional anaerobic digestion systems in Snohomish County, Washington.

  16. Ute Mountain Ute Tribe Community-Scale Solar Feasibility Study

    SciTech Connect

    Rapp, Jim; Knight, Tawnie

    2014-01-30

    Parametrix Inc. conducted a feasibility study for the Ute Mountain Ute Tribe to determine whether or not a community-scale solar farm would be feasible for the community. The important part of the study was to find where the best fit for the solar farm could be. In the end, a 3MW community-scale solar farm was found best fit with the location of two hayfield sites.

  17. Large Deployable Reflector (LDR) feasibility study update

    NASA Technical Reports Server (NTRS)

    Alff, W. H.; Banderman, L. W.

    1983-01-01

    In 1982 a workshop was held to refine the science rationale for large deployable reflectors (LDR) and develop technology requirements that support the science rationale. At the end of the workshop, a set of LDR consensus systems requirements was established. The subject study was undertaken to update the initial LDR study using the new systems requirements. The study included mirror materials selection and configuration, thermal analysis, structural concept definition and analysis, dynamic control analysis and recommendations for further study. The primary emphasis was on the dynamic controls requirements and the sophistication of the controls system needed to meet LDR performance goals.

  18. Feasibility study: Assess the feasibility of siting a monitored retrievable storage facility. Phase 1

    SciTech Connect

    King, J.W.

    1993-08-01

    The purpose of phase one of this study are: To understand the waste management system and a monitored retrievable storage facility; and to determine whether the applicant has real interest in pursuing the feasibility assessment process. Contents of this report are: Generating electric power; facts about exposure to radiation; handling storage, and transportation techniques; description of a proposed monitored retrievable storage facility; and benefits to be received by host jurisdiction.

  19. Wind Generation Feasibility Study in Bethel, AK

    SciTech Connect

    Tom Humphrey, YKHC; Lance Kincaid, EMCOR Energy & Technologies

    2004-07-31

    This report studies the wind resources in the Yukon-Kuskokwim Health Corporation (YKHC) region, located in southwestern Alaska, and the applicability of wind generation technologies to YKHC facilities.

  20. Remedial investigation/feasibility study badger army ammunition plant Baraboo, Wisconsin. Volume 2. Feasibility study report

    SciTech Connect

    1994-08-01

    This Feasibility Study (FS) report for the Badger Army Ammunition Plant (BAAP) in Baraboo, Wisconsin, was prepared by ABB Environmental Services, Inc. (ABB-ES) as a component of Task Order 1 of Contract DAAAl5-91-D-OOO8 with the U.S. Army Environmental Center (USAEC). This report uses the results presented in the Final Remedial Investigation (RI) report (ABB-ES, 1993a) to develop and screen alternatives for remediation of contaminated media at BAAP. The purpose of this FS report is to develop, screen, and evaluate site-specific remedial alternatives to mitigate the impact of site-derived chemicals and ultimately provide protection of human health and the environment. Preferred alternatives for each site are included in this report. Based on previous environmental studies at BAAP, 11 potential hazardous waste sites were ranked according to potential contributions of hazardous chemicals to the environment. These sites were designated as Waste Management Areas because some of the sites contain multiple Solid Waste Management Units (SWMUs). The sites selected to undergo facility assessment and corrective actions are: the Propellant Burning Ground (including Landfill), Deterrent Burning Ground, existing Landfill, Settling Ponds and Spoils Disposal Area, Rocket Paste Area, Oleum Plant and Oleum Plant Pond, Nitroglycerine Pond, old Acid Area, new Acid Area, and Ballistics Pond. The USAEC added an 11th site, the Old Fuel Oil Tank, to the list in October 1989 after discovery of fuel-contaminated soils during excavation of a water line in the vicinity of the old fuel oil tank foundation.

  1. Remedial investigation/feasibility study badger army ammunition plant Baraboo, Wisconsin. Volume 1. Feasibility study report

    SciTech Connect

    1994-08-01

    This Feasibility Study (FS) report for the Badger Army Ammunition Plant (BAAP) in Baraboo, Wisconsin, was prepared by ABB Environmental Services, Inc. (ABB-ES) as a component of Task Order 1 of Contract DAAAl5-91-D-OOO8 with the U.S. Army Environmental Center (USAEC). This report uses the results presented in the Final Remedial Investigation (RI) report (ABB-ES, 1993a) to develop and screen alternatives for remediation of contaminated media at BAAP. The purpose of this FS report is to develop, screen, and evaluate site-specific remedial alternatives to mitigate the impact of site-derived chemicals and ultimately provide protection of human health and the environment. Preferred alternatives for each site are included in this report. Based on previous environmental studies at BAAP, 11 potential hazardous waste sites were ranked according to potential contributions of hazardous chemicals to the environment. These sites were designated as Waste Management Areas because some of the sites contain multiple Solid Waste Management Units (SWMUs). The sites selected to undergo facility assessment and corrective actions are: the Propellant Burning Ground (including Landfill), Deterrent Burning Ground, existing Landfill, Settling Ponds and Spoils Disposal Area, Rocket Paste Area, Oleum Plant and Oleum Plant Pond, Nitroglycerine Pond, old Acid Area, new Acid Area, and Ballistics Pond. The USAEC added an 11th site, the Old Fuel Oil Tank, to the list in October 1989 after discovery of fuel-contaminated soils during excavation of a water line in the vicinity of the old fuel oil tank foundation.

  2. Front Range Forest Health Partnership Phase 1 feasibility study

    SciTech Connect

    Volkin, P

    1998-09-01

    The Front Range Forest Health Partnership is an alliance of individuals, citizen groups, federal, state, private, and nonprofit organizations that formed to promote forest health restoration and reduce fire risks on Colorado's Front Range. The partnership promotes selective thinning to restore forest health and supports economically feasible end uses for wood waste materials. The Phase I study was initiated to determine the environmental and economic feasibility of using wood wastes from forested and urban areas for the production of fuel-grade ethanol.

  3. Energy Education Training Center--Feasibility Study.

    ERIC Educational Resources Information Center

    Mead, George R.; And Others

    Presented are findings and recommendations of a study conducted to determine the need for an Energy Education Training Center in the Columbia Plateau region of Oregon and Washington. Four sections comprise this report: (1) service area, (2) service population, (3) problem definition, and (4) proposed solution, the EETC. Information summarized in…

  4. World Languages and Cultures Feasibility Study

    ERIC Educational Resources Information Center

    Sklarz, David P.

    2013-01-01

    The purpose of the study was to conduct a comprehensive review of the research and best practices of exemplary elementary school World Language and Culture Programs. Specifically, (1) to assess the degree to which various program designs had most closely met the measurable goals of the American Council of Teachers of a Foreign Language, commonly…

  5. Mined salt storage feasibility: Engineering study report

    SciTech Connect

    Not Available

    1987-07-01

    This study addresses a method of eliminating the surface storage of mined salt at the Deaf Smith repository site. It provides rough estimates of the logistics and costs of transporting 3.7 million tons of salt from the repository to the salt disposal site near Carlsbad, New Mexico and returning it to the repository for decommissioning backfill. The study assumes that a railcar/truck system will be installed and that the excavated salt will be transported from the repository to an existing potash mine located near Carlsbad, New Mexico approximately 300 miles from the repository. The 3.7 million tons of salt required for repository decommissioning backfill can be stored in the potash mines along with the excess salt, with no additional capital costs required for either a railcar or a truck transportation system. The capital cost for facilities to reclaim the 3.7 million tons of salt from the potash mine is estimated to be $4,400,000 with either a rail or truck transportation system. Segregating the 3.7 million tons of backfill salt in a surface storage area at the potash mine requires a capital cost of $13,900,000 with a rail system or $11,400,000 with a truck system. Transportation costs are estimated at $0.08/ton-mile for rail and $0.13/ton-mile for truck. 2 figs., 5 tabs.

  6. Feasibility study of CPR in the water.

    PubMed

    March, N F; Matthews, R C

    1980-06-01

    More than 8000 drownings occur each year in the United States alone. With the increased popularity of scuba diving for commercial and sport purposes, one would predict an increase in related deaths or accidents. Yet procedures to administer first aid are limited to mouth-to-mouth, and external cardiac compressions must await moving the victim to a firm surface. This study discusses the technique of placing a victim upon the rescuer's chest and initiating full cardiopulmonary resuscitation (CPR) immediately on the site. During emergency regulator resuscitation (E.R.R.), ventilations are administered by use of a slightly modified, factory-calibrated scuba regulator. The techniques were tested on an instrumented aquatic CPR mannequin and found to meet the published criteria for successful CPR.

  7. CsIX/TRU Grout Feasibility Study

    SciTech Connect

    S. J. Losinski; C. M. Barnes; B. K. Grover

    1998-11-01

    A settlement agreement between the Department of Energy (DOE) and the State of Idaho mandates that liquid waste now stored at the Idaho Nuclear Technology Engineering Center (INTEC - formerly the Idaho Chemical Processing Plant, ICPP) will be calcined by the end of year 2012. This study investigates an alternative treatment of the liquid waste that removes undissolved solids (UDS) by filtration and removes cesium by ion exchange followed by cement-based grouting of the remaining liquid into 55-gal drums. Operations are assumed to be from January 2008 through December 2012. The grouted waste will be contact-handled and will be shipped to the Waste Isolation Pilot Plant (WIPP) in New Mexico for disposal. The small volume of secondary wastes such as the filtered solids and cesium sorbent (resin) would remain in storage at the Idaho National Engineering and Environmental Laboratory for treatment and disposal under another project, with an option to dispose of the filtered solids as a r emote-handled waste at WIPP.

  8. Automated Plasma Spray (APS) process feasibility study

    NASA Technical Reports Server (NTRS)

    Fetheroff, C. W.; Derkacs, T.; Matay, I. M.

    1981-01-01

    An automated plasma spray (APS) process was developed to apply two layer (NiCrAlY and ZrO2-12Y2O3) thermal barrier coatings to aircraft and stationary gas turbine engine blade airfoils. The APS process hardware consists of four subsystems: a mechanical positioning subsystem incorporating two interlaced six degree of freedom assemblies (one for coating deposition and one for coating thickness monitoring); a noncoherent optical metrology subsystem (for in process gaging of the coating thickness buildup at specified points on the specimen); a microprocessor based adaptive system controller (to achieve the desired overall thickness profile on the specimen); and commerical plasma spray equipment. Over fifty JT9D first stage aircraft turbine blade specimens, ten W501B utility turbine blade specimens and dozens of cylindrical specimens were coated with the APS process in preliminary checkout and evaluation studies. The best of the preliminary turbine blade specimens achieved an overall coating thickness uniformity of 53 micrometers (2.1 mils), much better than is achievable manually. Comparative evaluations of coating thickness uniformity for manually sprayed and APS coated specimens were performed. One of the preliminary turbine blade evaluation specimens was subjected to a torch test and metallographic evaluation. Some cylindrical specimens coated with the APS process survived up to 2000 cycles in subsequent burner rig testing.

  9. (Feasibility study of the San Lorenzo River hydroelectric project)

    SciTech Connect

    Chronowski, R.A.

    1990-07-19

    I travelled to San Jose, Costa Rica on July 8, 1990 to evaluate all of the completed elements of the ongoing feasibility study for the San Lorenzo River hydroelectric project. The feasibility study is being supported by ORNL under the Renewable Energy Applications and Training Project. The project is being studied for implementation by CONELECTRICAS, a consortium of rural electric cooperatives and the study itself is being conducted by BEL Engineering, a Costa Rican consulting firm under contract to CONELECTRICAS, USAID/PIC and NRECA.

  10. A feasibility study of orbiter flight control experiments

    NASA Technical Reports Server (NTRS)

    Geissler, W. H.

    1978-01-01

    The results of a feasibility study of orbiter flight control experiments performed are summarized. Feasibility studies were performed on a group of 14 experiments selected from a candidate list of 35 submitted to the study contractor by the flight control community. Concepts and requirements were developed for the 14 selected experiments and they were ranked on a basis of technical value, feasibility, and cost. It was concluded that all the selected experiments can be considered as potential candidates for the Orbiter Experiment program, which is being formulated for the Orbiter Flight Tests and subsequent operational flights, regardless of the relative ranking established during the study. None of the selected experiments has significant safety implications and the cost of most was estimated to be less than $200K.

  11. [Cambridge Conference on School Mathematics Feasibility Studies 9-13.

    ERIC Educational Resources Information Center

    Cambridge Conference on School Mathematics, Newton, MA.

    These materials are a part of a series of studies sponsored by the Cambridge Conference on School Mathematics which reflects the ideas of CCSM regarding the goals and objectives for school mathematics K-12. Feasibility Studies 9-13 contain a wide range of topics. The following are the titles and brief descriptions of these studies. Number…

  12. Precipitation measurement using SIR-C: A feasibility study

    NASA Technical Reports Server (NTRS)

    Ahamad, Atiq; Moore, Richard K.

    1993-01-01

    A precipitation detection and measurement experiment is planned for the SIR-C/X-SAR mission. This study was conducted to determine under what conditions an off-nadir experiment is feasible. The signal-to-clutter ratio, the signal-to-noise ratio, and the minimum detectable rain rate were investigated. Available models, used in previous studies, were used for the surface clutter and the rain echo. The study also considers the attenuation of the returns at X band. It was concluded that an off-nadir rain-measurement experiment is feasible only for rain rates greater than 10 mm/hr for look angles greater than 60 deg. For the range of look angles 5 less than theta(sub 1) less than 50, the rain rate required is very high for adequate signal-to-clutter ratio, and hence the feasibility of the experiment.

  13. Solar pond power plant feasibility study for Davis, California

    NASA Technical Reports Server (NTRS)

    Wu, Y. C.; Singer, M. J.; Marsh, H. E.; Harris, J.; Walton, A. L.

    1982-01-01

    The feasibility of constructing a solar pond power plant at Davis, California was studied. Site visits, weather data compilation, soil and water analyses, conceptual system design and analyses, a material and equipment market survey, conceptual site layout, and a preliminary cost estimate were studied. It was concluded that a solar pond power plant is technically feasible, but economically unattractive. The relatively small scale of the proposed plant and the high cost of importing salt resulted in a disproportionately high capital investment with respect to the annual energy production capacity of the plant. Cycle optimization and increased plant size would increase the economical attractiveness of the proposed concept.

  14. Feasibility study ASCS remote sensing/compliance determination system

    NASA Technical Reports Server (NTRS)

    Duggan, I. E.; Minter, T. C., Jr.; Moore, B. H.; Nosworthy, C. T.

    1973-01-01

    A short-term technical study was performed by the MSC Earth Observations Division to determine the feasibility of the proposed Agricultural Stabilization and Conservation Service Automatic Remote Sensing/Compliance Determination System. For the study, the term automatic was interpreted as applying to an automated remote-sensing system that includes data acquisition, processing, and management.

  15. Feasibility study of liquid pool burning in reduced gravity

    NASA Technical Reports Server (NTRS)

    Kanury, A. M.

    1979-01-01

    The feasibility of conducting experiments in the Spacelab on ignition and flame spread with liquid fuel pools which are initially at a temperature lower than the fuel's flash point temperature was studied. Theories were developed for the ignition and flame spread processes, and experiments were conducted to understand the factors influencing the ignition process and the spread rate. The results were employed to devise a conceptual Spacelab experiment which is expected to be feasible for a safe conduct and to be suitable for obtaining crucial data on the concerned processes.

  16. Feasibility study of full-reactor gas core demonstration test

    NASA Technical Reports Server (NTRS)

    Kunze, J. F.; Lofthouse, J. H.; Shaffer, C. J.; Macbeth, P. J.

    1973-01-01

    Separate studies of nuclear criticality, flow patterns, and thermodynamics for the gas core reactor concept have all given positive indications of its feasibility. However, before serious design for a full scale gas core application can be made, feasibility must be shown for operation with full interaction of the nuclear, thermal, and hydraulic effects. A minimum sized, and hence minimum expense, test arrangement is considered for a full gas core configuration. It is shown that the hydrogen coolant scattering effects dominate the nuclear considerations at elevated temperatures. A cavity diameter of somewhat larger than 4 ft (122 cm) will be needed if temperatures high enough to vaporize uranium are to be achieved.

  17. A feasibility study of a hypersonic real-gas facility

    NASA Technical Reports Server (NTRS)

    Gully, J. H.; Driga, M. D.; Weldon, W. F.

    1987-01-01

    A four month feasibility study of a hypersonic real-gas free flight test facility for NASA Langley Research Center (LARC) was performed. The feasibility of using a high-energy electromagnetic launcher (EML) to accelerate complex models (lifting and nonlifting) in the hypersonic, real-gas facility was examined. Issues addressed include: design and performance of the accelerator; design and performance of the power supply; design and operation of the sabot and payload during acceleration and separation; effects of high current, magnetic fields, temperature, and stress on the sabot and payload; and survivability of payload instrumentation during acceleration, flight, and soft catch.

  18. A Feasibility Study of Youth Apprenticeship in Arkansas.

    ERIC Educational Resources Information Center

    Jobs for the Future, Inc., West Somerville, MA.

    A study assessed the feasibility and attractiveness of youth apprenticeship in Arkansas in over 80 interviews with employers in 5 key Arkansas industries and occupations. They were allied health, food processing (equipment repair and maintenance and lab technician/quality control), information services, metalworking, and self-employment and…

  19. Improving Children's Formal Word Definitions: A Feasibility Study

    ERIC Educational Resources Information Center

    Marinellie, Sally A.

    2010-01-01

    The ability to define a word with accuracy and precision is an important skill that has been associated with academic achievement. This study investigated the feasibility of conducting a lesson on formal word definitions to improve children's definitional production. The participants were 18 children in grade 4 (mean age: 9 years; 8 months) who…

  20. Feasibility Study of the Social Enterprise Intervention with Homeless Youth

    ERIC Educational Resources Information Center

    Ferguson, Kristin M.; Xie, Bin

    2008-01-01

    Objective: To reduce mental health symptoms and high-risk behaviors and increase social support and service utilization among street-living youth, the authors conducted a pilot study to assess the feasibility of the social enterprise intervention (SEI) at a homeless youth agency. Method: Convenience sampling was used to recruit 16 street-living…

  1. 7 CFR 4280.173 - Grant funding for feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE LOANS AND GRANTS Rural Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.173 Grant funding for... costs will be considered eligible. Eligible project costs for renewable energy system...

  2. 7 CFR 4280.173 - Grant funding for feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE LOANS AND GRANTS Rural Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.173 Grant funding for... costs will be considered eligible. Eligible project costs for renewable energy system...

  3. 7 CFR 4280.178 - Scoring feasibility study grant applications.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Scoring feasibility study grant applications. 4280.178 Section 4280.178 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE LOANS AND GRANTS...

  4. 7 CFR 4280.178 - Scoring feasibility study grant applications.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Scoring feasibility study grant applications. 4280.178 Section 4280.178 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE LOANS AND GRANTS...

  5. Florida Flexible Staff Organization Feasibility Study. Interim Report.

    ERIC Educational Resources Information Center

    Crenshaw, Joseph W.; And Others

    The rationale and master plan have been developed, in accordance with legislative mandate, for the planning and implementation of a Flexible Staff Organization (FSO) feasibility study involving the operation of model FSO projects in selected Florida elementary and secondary schools. Objectives will be to explore patterns of staff utilization…

  6. British Columbia Library Network: A Study of Feasibility. Revised.

    ERIC Educational Resources Information Center

    Shoffner, Ralph M.; Madden, Mary A.

    This feasibility study was conducted to collect financial, operational, and other data concerning the alternatives of continuing with the University of Toronto Library Automation System (UTLAS), the present supplier of catalog support to the British Columbia Union Catalogue (BCUC) participating libraries, or of replicating the Washington Library…

  7. Technical implementation of feasibility study-II design

    SciTech Connect

    Zisman, Michael S.; Ozaki, Satoshi; Palmer, Robert B.

    2001-03-22

    An updated Feasibility Study for a high-performance Neutrino Factory has been undertaken by Brookhaven National Laboratory (BNL) and the Neutrino Factory and Muon Collider Collaboration (MC). We describe the technical implementation of the facility. Details of the key components are shown, and R and D activities that need to be addressed to proceed toward a facility design are indicated.

  8. Embedding Resilience within the Tertiary Curriculum: A Feasibility Study

    ERIC Educational Resources Information Center

    Stallman, Helen M.

    2011-01-01

    Mental health problems can significantly impact on the ability of university students to both meet their individual potential and contribute positively within society. This study evaluates the feasibility of embedding a strength-focused resilience-building seminar within a university curriculum. Participants were 247 students enrolled in an…

  9. Coeur d'Alene Tribe Energy Efficiency Feasibility Study

    SciTech Connect

    Allgood, Tiffany L.; Sorter, Andy

    2014-09-01

    The Coeur d'Alene Tribe's Energy Efficiency Feasibility Study (EEFS) is the culminating document that compiles the energy efficiency and building performance assessment and project prioritization process completed on 36 Tribally owned and operated facilities within Tribal lands. The EEFS contains sections on initial findings, utility billing analyses, energy conservation measures and prioritization and funding sources and strategies for energy project implementation.

  10. Feasibility Study For Establishing A Training Program For Calibration Technicians.

    ERIC Educational Resources Information Center

    Baker, John B.

    With the proliferation of electronic equipment on the market, this study was conducted to determine the feasibility of training calibration technicians at the college level in the region served by the North-Central Association of Colleges and Secondary Schools. Questionnaires were mailed to 378 supervisors of technical personnel, representing…

  11. Staging and storage facility feasibility study. Final report

    SciTech Connect

    Swenson, C.E.

    1995-02-01

    This study was performed to investigate the feasibility of adapting the design of the HWVP Canister Storage Building (CSB) to meet the needs of the WHC Spent Nuclear Fuel Project for Staging and Storage Facility (SSF), and to develop Rough Order of Magnitude (ROM) cost and schedule estimates.

  12. Small modular biopower initiative Phase 1 feasibility studies executive summaries

    SciTech Connect

    Bain, R.

    2000-03-06

    The Phase 1 objective is a feasibility study that includes a market assessment, resource assessment, preliminary system design, and assessment of relevant environmental and safety considerations, and evaluation of financial and cost issues, and a preliminary business plan and commercialization strategy. Each participating company will share at least 20% of the cost of the first phase.

  13. Technical design aspects of Feasibility Study-II

    SciTech Connect

    Zisman, Michael S.

    2001-08-15

    Feasibility Study-II examined a high-performance Neutrino Factory providing 1 x 10{sup 20} neutrinos per year aimed at a long-baseline detector. The Study was sponsored jointly by BNL and the Neutrino Factory and Muon Collider Collaboration ration (MC) and is based on a 1 MW proton driver operating at 24 GeV, i.e., an upgraded version of the AGS accelerator. Compared with the earlier FNAL-sponsored study (Feasibility Study-I), there is a sixfold improvement in performance. Here we describe details of the implementation of Study-II concepts and discuss their efficacy. Alternative approaches that will be pursued in follow-on R and D activities are also described briefly.

  14. Feasibility studies of the diffractive bremsstrahlung measurement at the LHC

    NASA Astrophysics Data System (ADS)

    Chwastowski, Janusz J.; Czekierda, Sabina; Kycia, Radosław; Staszewski, Rafał; Turnau, Jacek; Trzebiński, Maciej

    2016-06-01

    Feasibility studies of an observation of the exclusive diffractive bremsstrahlung in proton-proton scattering at the centre of mass energy 13 TeV at the LHC are reported. These studies aim at the dedicated data taking periods with low instantaneous luminosity delivered by the LHC where the pile-up interactions can be neglected. A simplified approach to the photon and the scattered proton energy reconstruction is used. The background influence is discussed.

  15. Feasibility study on the thorium fueled boiling water breeder reactor

    SciTech Connect

    PetrusTakaki, N.

    2012-07-01

    The feasibility of (Th,U)O 2 fueled, boiling water breeder reactor based on conventional BWR technology has been studied. In order to determine the potential use of water cooled thorium reactor as a competitive breeder, this study evaluated criticality, breeding and void reactivity coefficient in response to changes made in MFR and fissile enrichments. The result of the study shows that while using light water as moderator, low moderator to fuel volume ratio (MFR=0.5), it was possible to breed fissile fuel in negative void reactivity condition. However the burnup value was lower than the value of the current LWR. On the other hand, heavy water cooled reactor shows relatively wider feasible breeding region, which lead into possibility of designing a core having better neutronic and economic performance than light water with negative void reactivity coefficient. (authors)

  16. 7 CFR 4280.177 - Evaluation of feasibility study grant applications.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.177 Evaluation of feasibility study grant applications. (a) Agency evaluation. Feasibility study applications... 7 Agriculture 15 2014-01-01 2014-01-01 false Evaluation of feasibility study grant...

  17. 7 CFR 4280.177 - Evaluation of feasibility study grant applications.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.177 Evaluation of feasibility study grant applications. (a) Agency evaluation. Feasibility study applications... 7 Agriculture 15 2012-01-01 2012-01-01 false Evaluation of feasibility study grant...

  18. US-Canada Great Lakes Regional Specimen Bank Feasibility Study.

    PubMed

    Kerry, A; Edmonds, C J; Landon, L; Yonker, T L

    1993-11-01

    A study to examine the feasibility of establishing a Regional Specimen Bank in the Great Lakes area of the United States and Canada has recently been initiated by the Michigan Audubon Society. There are several existing formal and informal specimen banking facilities active in the region but their combined adequacy has not been evaluated. This feasibility study will establish the need and use of a regional bank and the institution(s) necessary to satisfy this need will be recommended. The study will address the scope required to meet present and future needs including the types of specimens to be represented in the bank, geographic coverage and protocols for collection, shipping, processing, analysis and storage. A management policy of the bank will be developed encompassing business operation, costs, governing structure and personnel requirements. The legal requirements of the bank will be determined with regards to the acquisition of samples, transport across national boundaries, access to specimens and information, and liability during operation. An effective information dissemination network will be recommended that is compatible with national and international partners, will facilitate technology and information transfer and support the quality and status of the bank. Determination of secure, long-term funding sources will be one of the key elements to ensuring a safe repository. This feasibility study is funded by the Great Lakes Protection Fund.

  19. A feasibility study: Forest Fire Advanced System Technology (FFAST)

    NASA Technical Reports Server (NTRS)

    Mcleod, R. G.; Martin, T. Z.; Warren, J.

    1983-01-01

    The National Aeronautics and Space Administration/Jet Propulsion Laboratory and the United States Department of Agriculture Forest Service completed a feasibility study that examined the potential uses of advanced technology in forest fires mapping and detection. The current and future (1990's) information needs in forest fire management were determined through interviews. Analysis shows that integrated information gathering and processing is needed. The emerging technologies that were surveyed and identified as possible candidates for use in an end to end system include ""push broom'' sensor arrays, automatic georeferencing, satellite communication links, near real or real time image processing, and data integration. Matching the user requirements and the technologies yielded a ""strawman'' system configuration. The feasibility study recommends and outlines the implementation of the next phase for this project, a two year, conceptual design phase to define a system that warrants continued development.

  20. Feasibility Study of Optically Transparent Microstrip Patch Antenna

    NASA Technical Reports Server (NTRS)

    Simons, Rainee N.; Lee, Richard Q.

    1997-01-01

    The paper presents a feasibility study on optically transparent patch antennas with microstrip line and probe feeds. The two antennas operate at 2.3 GHz and 19.5 GHz respectively. They are constructed from a thin sheet of clear polyester with an AgHT-8 optically transparent conductive coating. The experimental results show good radiation patterns and input impedance match. The antennas have potential applications in mobile wireless communications.

  1. Feasibility study for the development of low temperature curing adhesives

    NASA Technical Reports Server (NTRS)

    Green, H. E.; Sutherland, J. D.; Sheppard, C. H.

    1974-01-01

    The feasibility of a new approach for the development of stable, easily handled, room temperature (293 K - 311 K) curing adhesives was studied and demonstrated. The work concentrated on a family of unsaturated amide/ester resins. Twelve candidate resins were synthesized and tested for completeness of cure at room temperature, adhesion to aluminum and titanium, shear strength, moisture resistance and heat stability. The three most promising candidate resins were selected and recommended for further development.

  2. Feasibility Study for a Hopi Utility-Scale Wind Project

    SciTech Connect

    Kendrick Lomayestewa

    2011-05-31

    The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. Wind resource assessments were conducted at two study sites on Hopi fee simple lands located south of the city of Winslow. Reports from the study were recently completed and have not been compared to any existing historical wind data nor have they been processed under any wind assessment models to determine the output performance and the project economics of turbines at the wind study sites. Ongoing analysis of the wind data and project modeling will determine the feasibility of a tribal utility-scale wind energy generation.

  3. Will patients accept randomization to psychoanalysis? A feasibility study.

    PubMed

    Caligor, Eve; Hilsenroth, Mark J; Devlin, Michael; Rutherford, Bret R; Terry, Madeleine; Roose, Steven P

    2012-04-01

    The feasibility of using a randomized design in a psychoanalytic outcome study was evaluated. Our hypothesis was that it would be feasible to randomize patients to psychoanalysis three or four times weekly on the couch for five years, supportive expressive therapy once or twice weekly for up to forty sessions, and cognitive behavior therapy once or twice weekly for up to forty sessions. Successful randomization was defined as a 30% recruitment rate among eligible patients. Recruitment began in September 2009 and closed in April 2010. A total of 132 subjects responded to study advertisements, 107 of whom (81%) were triaged out. The remaining 25 were scheduled for the first of two clinical interviews, and 21 of 25 (88%) completed the interview. Eleven of the 25 (44%) were determined to be eligible based on inclusion and exclusion criteria. Eight of the 11 accepted the idea of randomization and completed the diagnostic assessment phase. Calculated on the basis of 8 of 11 eligible patients accepting randomization, the 95% confidence interval was that 39% to 92% of eligible subjects would participate in a larger study of this design. Our findings support the feasibility of implementing an RCT comparing psychoanalysis as defined by the American Psychoanalytic Association (three or four times weekly on the couch for approximately five years) with shorter-term dynamic or cognitive behavioral therapy once or twice a week. Pre-treatment characteristics of these eight patients are presented, as are initial reliability data for the treatment adherence scales used in this trial.

  4. PUEBLO OF ZIA RENEWABLE ENERGY DEVELOPMENT FEASIBILITY STUDY

    SciTech Connect

    Pino, Peter M.; Lakshman, Jai; Toole, G. Loren; Witcher, James; Emerson, Michael A.; Turner, Jeremy; Sandidge, Wendy

    2014-06-30

    The Pueblo of Zia will conduct a comprehensive feasibility study for best-use application(s) for development of renewable energy resources on its tribally held TRUST lands (i.e., Trust Lands of Zia Indian Reservation). The feasibility study is essential for determining the technical and economic viability of a future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe. Project Objectives: The feasibility study is essential for determining the technical and economic viability of future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe to: 1. Provide a balanced local renewable power supply for Zia Pueblo, its members, tribal offices, schools and buildings, and businesses on tribal lands 2. Provide a firm power supply for export and commercial market distribution 3. Provide economic development for the Tribe and its members, including job training and creation, each in accordance with the goals and objectives as conveyed by the Pueblo of Zia Tribal Council, Tribal Administration, and outlined in The Pueblo of Zia Comprehensive Plan and Pueblo of Zia — Zia Enterprise Zone Master Plan. A key goal of the study is to analyze the integrated development of solar, geothermal, and wind renewable energy resources at Zia Pueblo, with added potential to combine gas-fired generation to accomplish energy firming. Geothermal offers a base load source of energy, providing power continuously for end users. Wind and solar offer intermediate and peaking sources of energy, which can be harvested throughout the day, with periods of variable but predicable output. Variability will be managed in an integrated manner, using Zia Pueblo's combined renewable resources to generate high-quality power. Tasks are intended to collect, catalog, map, and analyze existing data on Zia Pueblo's renewable energy resource base and then match resource attributes with the most

  5. Feasibility Study for Casting of High Temperature Refractory Superalloy Composites

    NASA Technical Reports Server (NTRS)

    Lee, Jonathan A.

    1998-01-01

    Abstract This study investigated the feasibility of using conventional casting technique to fabricate refractory wires reinforced superalloy composites. These composites were being developed for advanced rocket engine turbine blades and other high temperature applications operating up to 2000 F. Several types of refractory metal wires such as W- Th, W-Re, Mo-Hf-C and W-HF-C reinforced waspaloy were experimentally cast and heat treated at 2000 F up to 48 hrs. Scanning electron microscope analysis was conducted in regions adjacent to the wire-matrix interface to determine the reaction zone and chemical compatibility resulting from material interdiffusion. It was concluded that fabrication using conventional casting may be feasible because the wire-matrix reaction zone thickness was comparable to similar composites produced by arc-sprayed monotape with hot isostatic pressing technique, Moreover, it was also found that the chemical compatibility could be improved significantly through a slight modification of the superalloy matrix compositions.

  6. Market assessment and technical feasibility study of PFBC ash use

    SciTech Connect

    Smith, V.E.; Bland, A.E.; Brown, T.H.; Georgiou, D.N.; Wheeldon, J.

    1994-10-01

    The overall objectives of this study are to determine the market potential and the technical feasibility of using PFBC ash in high volume ash use applications. The information will be of direct use to the utility industry in assessing the economics of PFBC power generation in light of ash disposal avoidance through ash marketing. In addition, the research is expected to result in the generation of generic data on the use of PFBC ash that could lead to novel processing options and procedures. The specific objectives of the proposed research and demonstration effort are: Define resent and future market potential of PFBC ash for a range of applications (Phase I); assess the technical feasibility of PFBC ash use in construction, civil engineering and agricultural applications (Phase II); and demonstrate the most promising of the market and ash use options in full-scale field demonstrations (Phase III).

  7. Feasibility study on steam injector water injection system for JSBWR

    SciTech Connect

    Narabayashi, Tadashi; Yano, Takashi; Arai, Kanji

    1997-12-01

    A feasibility study has been conducted respecting a steam injector driven system (SIS) for low pressure core injection system (SI-LPCI) for a Japanese-type simplified BWR (JSBWR). The steam injector (SI) is a simple, compact passive pump driven by supersonic steam jet condensation. The feasibility and demonstration tests were conducted and water was successfully injected into the simulated injection line. The steam injector could operate under the condition of very low steam pressure, such as near atmospheric pressure (0.3 MPa), and it discharged water at 0.6 MPa by the time the gravity driven core injection system (GDCS) started operation. The system simplified the core depressurization system using large depressurization valves (DPV). 8 refs., 22 figs., 5 tabs.

  8. Design Feasibility Study of a Space Station Freedom Truss

    NASA Technical Reports Server (NTRS)

    Armand, Sasan C.; Dohogne, Caroline A.

    1992-01-01

    Here, the focus is on the design and configuration feasibility of the short spacer for the Space Station Program in its launch configuration. The product of this study is being used by Rockwell International (Rocketdyne Division) as they continue their design concept of the current short spacer configuration. It is anticipated that the launch loads will dominate the on-orbit loads and dictate the design configuration of the short spacer. At the present time, the on-orbit loads have not been generated. The structural analysis discussed herein is based on the transient events derived from the Space Transportation System (STS) Interface Control Document (ICD). The transient loading events consist of liftoff loads, landing loads, and emergency landing loads. The quasi-static loading events have been neglected, since the magnitude of the acceleration factors are lower than the transient acceleration factors. The normal mode analyses presented herein are based on the most feasible configurations with acceptable stress ranges.

  9. Pascua Yaqui Tribe Renewable Energy Development and Deployment Feasibility Study

    SciTech Connect

    Arvayo, Maria

    2014-05-30

    In 2012, PYT was awarded a grant from the Department of Energy Tribal Energy Program to conduct a Renewable Energy Development and Deployment Feasibility Study that would define the technical and economic viability of renewable energy on tribal lands. Red Mountain Energy Partners (RMEP) was hired by PYT to complete the study. Through this study, Red Mountain concluded that there are viable opportunities for solar at Tortuga Ranch, the Casino del Sol and a third site near the Justice Center on Camino de Oeste.

  10. Dual-Mission Large Aircraft Feasibility Study and Aerodynamic Investigation

    NASA Technical Reports Server (NTRS)

    Mavris, Dimitri

    1997-01-01

    A Dual-Mission Large Aircraft, or DMLA, represents the possibility of a single aircraft capable of fulfilling both a Global Reach Aircraft (GRA) and Very Large Transport (VLT) roles. The DMLA, by combining the GRA and VLT into a single new aircraft, could possibly lower the aircraft manufacturer's production costs through the resulting increase in production quantity. This translates into lower aircraft acquisition costs, a primary concern for both the Air Force and commercial airlines. This report outlines the first steps taken in this study, namely the assessment of technical and economic feasibility of the DMLA concept. In the course of this project, specialized GRA and VLT aircraft were sized for their respective missions, using baseline conventional (i.e., lacking advanced enabling technologies) aircraft models from previous work for the Air Force's Wright Laboratory and NASA-Langley. DMLA baseline aircraft were then also developed, by first sizing the aircraft for the more critical of the two missions and then analyzing the aircraft's performance over the other mission. The resulting aircraft performance values were then compared to assess technical feasibility. Finally, the life-cycle costs of each aircraft (GRA, VLT, and DMLA) were analyzed to quantify economic feasibility. These steps were applied to both a two-engine aircraft set, and a four-engine aircraft set.

  11. Feasibility study for a numerical aerodynamic simulation facility: Summary

    NASA Technical Reports Server (NTRS)

    Lincoln, N. R.

    1979-01-01

    The Ames Research Center of NASA is engaged in the development and investigation of numerical methods and computer technologies to be employed in conjunction with physical experiments, particularly utilizing wind tunnels in the furtherance of the field of aircraft and aerodynamic body design. Several studies, aimed primarily at the areas of development and production of extremely high-speed computing facilities, were conducted. The studies focused on evaluating the aspects of feasibility, reliability, costs, and practicability of designing, constructing, and bringing into effect production of a special-purpose system. An executive summary of the activities for this project is presented in this volume.

  12. Feasibility study for mega-electron-volt electron beam tomography

    SciTech Connect

    Hampel, U.; Baertling, Y.; Hoppe, D.; Kuksanov, N.; Fadeev, S.; Salimov, R.

    2012-09-15

    Electron beam tomography is a promising imaging modality for the study of fast technical processes. But for many technical objects of interest x rays of several hundreds of keV energy are required to achieve sufficient material penetration. In this article we report on a feasibility study for fast electron beam computed tomography with a 1 MeV electron beam. The experimental setup comprises an electrostatic accelerator with beam optics, transmission target, and a single x-ray detector. We employed an inverse fan-beam tomography approach with radiographic projections being generated from the linearly moving x-ray source. Angular projections were obtained by rotating the object.

  13. Feasibility study for mega-electron-volt electron beam tomography.

    PubMed

    Hampel, U; Bärtling, Y; Hoppe, D; Kuksanov, N; Fadeev, S; Salimov, R

    2012-09-01

    Electron beam tomography is a promising imaging modality for the study of fast technical processes. But for many technical objects of interest x rays of several hundreds of keV energy are required to achieve sufficient material penetration. In this article we report on a feasibility study for fast electron beam computed tomography with a 1 MeV electron beam. The experimental setup comprises an electrostatic accelerator with beam optics, transmission target, and a single x-ray detector. We employed an inverse fan-beam tomography approach with radiographic projections being generated from the linearly moving x-ray source. Angular projections were obtained by rotating the object.

  14. Feasibility Study of ϕ(1020) Production at NICA

    NASA Astrophysics Data System (ADS)

    Yordanova, Lyubka

    2016-01-01

    The goal of this article is to provide overview of the new accelerator complex NICA at JINR and to present the current results of the Multi-Purpose Detector (MPD) performance for ϕ-meson production. In our study we use the channel decay ϕ→ K+K- to detect the formation of the ϕ-meson. UrQMD event generator is used and central events at√s = 11 GeV are analyzed. The obtained values of the parameters from the invariant mass distribution are consistent with the PDG values. This study shows that the measurement of ϕ-meson is feasible at NICA/MPD.

  15. Variation of precipitation composition with altitude: a feasibility study

    SciTech Connect

    Barrett, C.F.; Goldsmith, A.L.; Hall, D.J.; Irwin, J.G.

    1985-01-01

    A feasibility study was carried out on the variation of precipitation composition with height. The study divides into two parts. A study of rain contamination was carried out at the Institute of Hydrology study catchment at Balquhidder. The limited number of results obtained were consistent with the hypothesis that rain composition, when averaged over a number of rain events, is constant with height. More work is needed but the methodology adopted was shown to be sound. As much of the precipitation on high ground in Scotland falls as snow, it was necessary to extend the study to snow. The accurate measurement of snow in other than calm or near-calm conditions is a difficult problem that has had extensive study over many years, and a new approach based on aerodynamic principles was adopted. Field trials were very encouraging but showed that some refinements are necessary.

  16. Feasibility study of a microprocessor based oculometer system

    NASA Technical Reports Server (NTRS)

    Varanasi, M. R.

    1981-01-01

    The elimination of redundancy in data to maximize processing speed and minimize storage requirements were objectives in a feasibility study of a microprocessor based oculometer system that would be portable in size and flexible in use. The appropriate architectural design of the signal processor, improved optics, and the reduction of size, weight, and power to the system were investigated. A flow chart is presented showing the strategy of the design. The simulation for developing microroutines for the high speed algorithmic processor subsystem is discussed as well as the Karhunen-Loeve transform technique for data compression.

  17. Feasibility Study: Potential Enhancements for the LLNL Renewables Website

    SciTech Connect

    Kearns, F; Krawchuk, M; Moritz, M; Stephens, S; Goldstein, N

    2008-01-25

    This feasibility study investigates additional improvements/extensions to the LLNL Renewables Website. Currently, the Renewables Website focuses on wind energy in California. Future enhancements will include other renewable energy sources. The extensions described below are focused along two separate yet related avenues: (1) Forecasting wildfire risk in the regions of California where new development may occur, as a part of the 'Million Solar Roofs' program. (2) Gaining a better understanding of the ecological components and potential of biofuels from forests in California. These two avenues are further described in the report. Following is a technical description of the Center for Fire Research and Outreach computing and web service capabilities.

  18. Feasibility Study for Operable Unit 7-13/14

    SciTech Connect

    K. Jean Holdren Thomas E. Bechtold Brian D. Preussner

    2007-05-29

    The Subsurface Disposal Area is a radioactive waste landfill located within the Radioactive Waste Management Complex at the Idaho National Laboratory Site in southeastern Idaho. This Feasibility Study for Operable Unit 7-13/14 analyzes options for mitigating risks to human health and the environment associated with the landfill. Analysis is conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act, using nine evaluation criteria to develop detailed and comparative analysis of five assembled alternatives. Assembled alternatives are composed of discrete modules. Ultimately, decision-makers will select, recombine, and sum various modules into an optimized preferred alternative and final remedial decision.

  19. Feasibility study for the United Heckathorn Superfund Site, Richmond, California

    SciTech Connect

    Lincoff, A.H.; Costan, G.P.; Montgomery, M.S.; White, P.J.

    1994-07-01

    The United Heckathom Superfund Site in Richmond, California, was used to formulate pesticides from approximately 1947 to 1966. Soils at the site and sediments in the harbor were contaminated with various chlorinated pesticides, primarily DDT, as a result of these activities. The US Environmental Protection Agency listed the site on the Superfund National Priorities List in 1990. This document is part of the Remedial Investigation and Feasibility Study phase of the Superfund response, which will provide the basis for selection of a final remedy that will protect human health and the environment and achieve compliance with federal and state envirorunental laws.

  20. Feasibility Study of Biomass Electrical Generation on Tribal Lands

    SciTech Connect

    Tom Roche; Richard Hartmann; Joohn Luton; Warren Hudelson; Roger Blomguist; Jan Hacker; Colene Frye

    2005-03-29

    The goals of the St. Croix Tribe are to develop economically viable energy production facilities using readily available renewable biomass fuel sources at an acceptable cost per kilowatt hour ($/kWh), to provide new and meaningful permanent employment, retain and expand existing employment (logging) and provide revenues for both producers and sellers of the finished product. This is a feasibility study including an assessment of available biomass fuel, technology assessment, site selection, economics viability given the foreseeable fuel and generation costs, as well as an assessment of the potential markets for renewable energy.

  1. Feasibility Study of a Satellite Solar Power Station

    NASA Technical Reports Server (NTRS)

    Glaser, P. E.; Maynard, O. E.; Mackovciak, J. J. R.; Ralph, E. I.

    1974-01-01

    A feasibility study of a satellite solar power station (SSPS) was conducted to: (1) explore how an SSPS could be flown and controlled in orbit; (2) determine the techniques needed to avoid radio frequency interference (RFI); and (3) determine the key environmental, technological, and economic issues involved. Structural and dynamic analyses of the SSPS structure were performed, and deflections and internal member loads were determined. Desirable material characteristics were assessed and technology developments identified. Flight control performance of the SSPS baseline design was evaluated and parametric sizing studies were performed. The study of RFI avoidance techniques covered (1) optimization of the microwave transmission system; (2) device design and expected RFI; and (3) SSPS RFI effects. The identification of key issues involved (1) microwave generation, transmissions, and rectification and solar energy conversion; (2) environmental-ecological impact and biological effects; and (3) economic issues, i.e., costs and benefits associated with the SSPS. The feasibility of the SSPS based on the parameters of the study was established.

  2. Feasibility of Piezoelectric Endoscopic Transsphenoidal Craniotomy: A Cadaveric Study

    PubMed Central

    Tomazic, Peter Valentin; Gellner, Verena; Koele, Wolfgang; Hammer, Georg Philipp; Braun, Eva Maria; Gerstenberger, Claus; Clarici, Georg; Holl, Etienne; Braun, Hannes; Stammberger, Heinz; Mokry, Michael

    2014-01-01

    Objective. Endoscopic transsphenoidal approach has become the gold standard for surgical treatment of treating pituitary adenomas or other lesions in that area. Opening of bony skull base has been performed with burrs, chisels, and hammers or standard instruments like punches and circular top knives. The creation of primary bone flaps—as in external craniotomies—is difficult.The piezoelectric osteotomes used in the present study allows creating a bone flap for endoscopic transnasal approaches in certain areas. The aim of this study was to prove the feasibility of piezoelectric endoscopic transnasal craniotomies. Study Design. Cadaveric study. Methods. On cadaveric specimens (N = 5), a piezoelectric system with specially designed hardware for endonasal application was applied and endoscopic transsphenoidal craniotomies at the sellar floor, tuberculum sellae, and planum sphenoidale were performed up to a size of 3–5 cm2. Results. Bone flaps could be created without fracturing with the piezoosteotome and could be reimplanted. Endoscopic handling was unproblematic and time required was not exceeding standard procedures. Conclusion. In a cadaveric model, the piezoelectric endoscopic transsphenoidal craniotomy (PETC) is technically feasible. This technique allows the surgeon to create a bone flap in endoscopic transnasal approaches similar to existing standard transcranial craniotomies. Future trials will focus on skull base reconstruction using this bone flap. PMID:24689037

  3. The NGST Yardstick Integrated Science Instrument Module (ISIM) Feasibility Study

    NASA Astrophysics Data System (ADS)

    Greenhouse, M. A.; NGST ISIM Team

    1999-05-01

    The Next Generation Space Telescope (NGST) Integrated Science Instrument Module (ISIM) is a distributed system consisting of a cryogenic instrument module that is integrated with the Optical Telescope Assembly (OTA) and science processors, software, and other electronics located in the Space Support Module (SSM). The ISIM system provides structure, environment, and data handling for several modular science instruments as well as several components of the OTA optics train. An ISIM baseline design and feasibility study is ongoing at GSFC. This pre-Phase A design was developed for integration with the Yardstick NGST architecture and packaging in a 5 m class EELV fairing. The goals of this study are to: [1] demonstrate mission science feasibility, [2] assess ISIM engineering and cost feasibility, [3] identify ISIM technology challenge areas,and [4] enable smart customer procurement of the NGST. In depth results from this work beyond those displayed here can be found at: http://www701.gsfc.nasa.gov/isim/isim.htm The flight ISIM will be developed by a GSFC led IPT that includes members from the STScI and, during Phase A/B, will grow to include the NGST Prime Contractor, and science instrument development teams from European, Canadian , and US science communities. Science instruments will be competitively procured from the science community, and will be integrated into the ISIM by GSFC. The flight qualified ISIM will then be delivered by GSFC to the NGST Prime Contractor for observatory level integration. At the start of NGST Phase A (Spring 1999), two competing prime contractors will begin development of separate NGST architectures, and the ISIM IPT will develop two ISIM designs corresponding to these architectures. Down selection to a single design will occur during mid 2001. The ISIM team welcomes science community feedback. Contact the IPT lead: Matt Greenhouse: matt@stars.gsfc.nasa.gov.

  4. Fusion Guidance in Endovascular Peripheral Artery Interventions: A Feasibility Study

    SciTech Connect

    Sailer, Anna M. Haan, Michiel W. de Graaf, Rick de Zwam, Willem H. van; Schurink, Geert Willem H.; Nelemans, Patricia J.; Wildberger, Joachim E. Das, Marco

    2015-04-15

    PurposeThis study was designed to evaluate the feasibility of endovascular guidance by means of live fluoroscopy fusion with magnetic resonance angiography (MRA) and computed tomography angiography (CTA).MethodsFusion guidance was evaluated in 20 endovascular peripheral artery interventions in 17 patients. Fifteen patients had received preinterventional diagnostic MRA and two patients had undergone CTA. Time for fluoroscopy with MRA/CTA coregistration was recorded. Feasibility of fusion guidance was evaluated according to the following criteria: for every procedure the executing interventional radiologists recorded whether 3D road-mapping provided added value (yes vs. no) and whether PTA and/or stenting could be performed relying on the fusion road-map without need for diagnostic contrast-enhanced angiogram series (CEAS) (yes vs. no). Precision of the fusion road-map was evaluated by recording maximum differences between the position of the vasculature on the virtual CTA/MRA images and conventional angiography.ResultsAverage time needed for image coregistration was 5 ± 2 min. Three-dimensional road-map added value was experienced in 15 procedures in 12 patients. In half of the patients (8/17), intervention was performed relying on the fusion road-map only, without diagnostic CEAS. In two patients, MRA roadmap showed a false-positive lesion. Excluding three patients with inordinate movements, mean difference in position of vasculature on angiography and MRA/CTA road-map was 1.86 ± 0.95 mm, implying that approximately 95 % of differences were between 0 and 3.72 mm (2 ± 1.96 standard deviation).ConclusionsFluoroscopy with MRA/CTA fusion guidance for peripheral artery interventions is feasible. By reducing the number of CEAS, this technology may contribute to enhance procedural safety.

  5. Feasibility study of solid surface subreflector production techniques

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The principal effort was to study technical feasibility and cost aspects of the production technique of spin forming a subreflector reflective surface to a desired surface of revolution, back the surface with fiberglass to stabilize it sufficiently so that it may be machined to the target surface tolerance of .008 inches Root Mean Square (RMS) with a goal of .003 inches RMS. To verify this production technique, analyses was performed to define the production procedure. A price estimate for a 150 inch diameter subreflector for a 34 meter cassegrain antenna. During this feasibility study, numerous production processes were evaluated theoretically as production approaches for single surface, non-welded subreflectors. The first successful was the principal process of spin forming the reflective surface, backing with fiberglass and machining to a final contour. The second successful process was spin forming or bump forming a thicker reflective surface, with an integral (welded in) structure as a backing and machining the mounting pads and reflector to a final configuration.

  6. Golestan cohort study of oesophageal cancer: feasibility and first results

    PubMed Central

    Pourshams, A; Saadatian-Elahi, M; Nouraie, M; Malekshah, A F; Rakhshani, N; Salahi, R; Yoonessi, A; Semnani, S; Islami, F; Sotoudeh, M; Fahimi, S; Sadjadi, A R; Nasrollahzadeh, D; Aghcheli, K; Kamangar, F; Abnet, C C; Saidi, F; Sewram, V; Strickland, P T; Dawsey, S M; Brennan, P; Boffetta, P; Malekzadeh, R

    2004-01-01

    To investigate the incidence of oesophageal cancer (EC) in the Golestan province of North-East Iran, we invited 1349 rural and urban inhabitants of Golestan province aged 35–80 to undergo extensive lifestyle interviews and to provide biological samples. The interview was repeated on a subset of 130 participants to assess reliability of questionnaire and medical information. Temperature at which tea was consumed was measured on two occasions by 110 subjects. Samples of rice, wheat and sorghum were tested for fumonisin contamination. An active follow-up was carried out after 6 and 12 months. A total of 1057 subjects (610 women and 447 men) participated in this feasibility study (78.4% participation rate). Cigarette smoking, opium and alcohol use were reported by 163 (13.8%), 93 (8.8%) and 39 (3.7%) subjects, respectively. Tobacco smoking was correlated with urinary cotinine (κ=0.74). Most questionnaire data had κ >0.7 in repeat measurements; tea temperature measurement was reliable (κ=0.71). No fumonisins were detected in the samples analysed. During the follow-up six subjects were lost (0.6%), two subjects developed EC (one dead, one alive); in all, 13 subjects died (with cause of death known for 11, 84.6%). Conducting a cohort study in Golestan is feasible with reliable information obtained for suspected risk factors; participants can be followed up for EC incidence and mortality. PMID:15597107

  7. Evaluating oil, gas ventures in W. Siberia: Feasibility studies

    SciTech Connect

    Krug, J.A. ); Connelly, W. )

    1993-02-08

    This article discusses the methodology and calculations used in performing the economic evaluations for a typical western Siberia oil project venture. The discussion of taxes, funds, depreciation, and costs assumes the venture is a stock company and that economics are calculated on a project basis. Most ventures available to western companies are delineated oil fields that are not yet developed or producing. The authors focus on this type of property. The required elements for an economic evaluation include original-oil-in-place (OOIP) and recoverable reserves; development plan and associated production forecast; and capital requirements and operating costs. The level of evaluation-i.e., screening, preliminary feasibility study, Technical Efficiency of Organization (TEO), or full feasibility study-determines the detail needed for each of these elements. Several economic analyses of a venture should be made to evaluate the sensitivity of alternative development plans, joint venture deal terms, capital requirements, operating costs, product prices, and taxation variables. The first three parts of this five part series dealt with (1) log and core data, (2) reservoir description and (3) flow tests and reservoir performance, and provided a technical foundation for the evaluation of oil and gas ventures in western Siberia.

  8. Florida Tech CubeSat Experiment Feasibility Study

    NASA Technical Reports Server (NTRS)

    Arrasmith, William W.; Bucaille, Stephane; Rusovici, Razvan; Platt, Don; Guidry, Todd; Bandar, Deepika; Coots, Everett; Davidson, Russ

    2010-01-01

    CubeSats are a relatively new type of satellite. Smaller than long-term (5+ year life expectancy) satellites, these pico-satellites are comparatively cheap, small (10x10x10 cm), and are very versatile. Universities world-wide are using CubeSats to conduct a variety of experiments in space without the need for a large experimental platform. Today CubeSats are considered to be one of the most effective ways to send a small payload into space and has attracted the attention of many educational and non-profit organizations. As this pico-satellite model continues to gain penetration into the satellite build and launch industry, it is expected that more governmental, educational, and commercial interests will emerge. As an example, more of the space-related items of high interest to the National Science Foundation may be tackled with a CubeSat platform resulting in lower life cycle costs than traditional satellite options. NASA LSP, in cooperation with the Florida Institute of Technology, has initiated a feasibility study to investigate the technical aspects of measuring and transferring vibration, acceleration, temperature, and video data from a CubeSat to NASA Hanger AE on Cape Canaveral Air Force Station (CCAFS) a.k.a. Kennedy Space Center (KSC). This report provides a technical feasibility analysis to determine whether-or-not a specific set of NASA/LSP requirements can be accomplished. Our approach has been to provide a "notional" component layout to determine the feasibility of the NASA/LSP stakeholder requirements. The notional layout is used to consider component level technical issues such as size, weight, & power (SWaP), bandwidth, and other critical technical parameters. Even though the notional components may satisfy the stated requirements and thereby demonstrate feasibility, the notional layout is NOT considered a design since no component optimization and design trade-off analysis has taken place. This activity should be accomplished in an appropriate

  9. Long life feasibility study for the shuttle infrared telescope facility

    NASA Technical Reports Server (NTRS)

    1985-01-01

    A study was conducted to assess the feasibility of designing an Infrared Telescope of the 1 meter class which would operate effectively as a Shuttleborne, 14-day Spacelab payload and then be adapted with little modification to work as a 6 month Space station or free flyer payload. The optics configuration and requirements from a previous study were used without modification. In addition, an enhancement to 2 year mission lengths was studied. The cryogenic system selected was a hybrid design with an internal solid Hydrogen tank at 8 Kelvin and an internal superfluid tank at 2K. In addition to the cryogenic design, a detailed look at secondary mirror actuators for chopping, focus and decenter was conducted and analysis and cryo test reported.

  10. MESHING MOLECULAR SEQUENCES AND CLINICAL TRIALS: A FEASIBILITY STUDY

    PubMed Central

    Chen, Elizabeth S.; Sarkar, Indra Neil

    2009-01-01

    The centralized and public availability of molecular sequence and clinical trial data presents an opportunity to identify potentially valuable linkages across the bench-to-bedside “T1” translational barrier. In this study, we sought to leverage keyword metadata (Medical Subject Heading [MeSH] descriptors) to infer relationships between molecular sequences and clinical trials, as indexed by GenBank and ClinicalTrials.gov. The results of this feasibility study found that approximately 30% of sequences in GenBank could be linked to trials and over 90% of trials in ClinicalTrials.gov could be linked to sequences through MeSH descriptors. In a cursory evaluation, we were able to consistently identify meaningful linkages between molecular sequences and clinical trials. Based on our findings, there may be promise in subsequent studies aiming to identify linkages across the T1 translational barrier using existing large repositories. PMID:19850150

  11. Space station tracking requirements feasibility study, volume 2

    NASA Technical Reports Server (NTRS)

    Udalov, Sergei; Dodds, James

    1988-01-01

    The objective of this feasibility study is to determine analytically the accuracies of various sensors being considered as candidates for Space Station use. Specifically, the studies were performed whether or not the candidate sensors are capable of providing the required accuracy, or if alternate sensor approaches should be investigated. Other topics related to operation in the Space Station environment were considered as directed by NASA-JSC. The following topics are addressed: (1) Space Station GPS; (2) Space Station Radar; (3) Docking Sensors; (4) Space Station Link Analysis; (5) Antenna Switching, Power Control, and AGC Functions for Multiple Access; (6) Multichannel Modems; (7) FTS/EVA Emergency Shutdown; (8) Space Station Information Systems Coding; (9) Wanderer Study; and (10) Optical Communications System Analysis. Brief overviews of the abovementioned topics are given. Wherever applicable, the appropriate appendices provide detailed technical analysis. The report is presented in two volumes. This is Volume 2, containing Appendices K through U.

  12. Space station tracking requirements feasibility study, volume 1

    NASA Technical Reports Server (NTRS)

    Udalov, Sergei; Dodds, James

    1988-01-01

    The objective of this feasibility study is to determine analytically the accuracies of various sensors being considered as candidates for Space Station use. Specifically, the studies were performed whether or not the candidate sensors are capable of providing the required accuracy, or if alternate sensor approaches be investigated. Other topics related to operation in the Space Station environment were considered as directed by NASA-JCS. The following topics are addressed: (1) Space Station GPS; (2) Space Station Radar; (3) Docking Sensors; (4) Space Station Link Analysis; (5) Antenna Switching, Power Control, and AGC Functions for Multiple Access; (6) Multichannel Modems; (7) FTS/EVA Emergency Shutdown; (8) Space Station Information Systems Coding; (9) Wanderer Study; and (10) Optical Communications System Analysis. Brief overviews of the abovementioned topics are given. Wherever applicable, the appropriate appendices provide detailed technical analysis. The report is presented in two volumes. This is Volume 1, containing the main body and Appendices A through J.

  13. Battery energy storage market feasibility study -- Expanded report

    SciTech Connect

    Kraft, S.; Akhil, A.

    1997-09-01

    Under the sponsorship of the US Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the battery energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed battery storage as an important technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  14. Managing asthma with mobile phones: a feasibility study.

    PubMed

    Holtz, Bree; Whitten, Pamela

    2009-11-01

    Asthma is a chronic disease and a growing health problem worldwide. The objective of this pilot study was to test the feasibility and utilization of tracking asthma symptoms through an innovative mobile phone application. The subjects for this research project consisted of 4 individuals who are currently receiving treatment for asthma from a primary care physician in Ingham County, Michigan. Participants took their peak flow reading each day and used the short message service (SMS) function on their phone and sent it to a Web server. If they did not send it by 11 AM, they received a reminder via an automated SMS to their phone. The resulting data suggest that this method of management is feasible. The data also demonstrate participants' satisfaction in monitoring their asthma in this manner. Using mobile phones for asthma management could improve compliance with asthma action plans and reduce adverse asthma events. Future research could further demonstrate that mobile phones are a new and effective method for providing healthcare.

  15. Anticipatory precrash restraint sensor feasibility study: Final report

    SciTech Connect

    Kercel, S.W.; Dress, W.B.

    1995-08-01

    This report explores feasibility of an anticipatory precrash restraint sensor. The foundation principle is the anticipation mechanism found at a primitive level of biological intelligence and originally formalized by the mathematical biologist Robert Rosen. A system based on formal anticipatory principles should significantly outperform conventional technologies. It offers the prospect of high payoff in prevention of death and injury. Sensors and processes are available to provide a good, fast, and inexpensive description of the present dynamical state of the vehicle to the embedded system model in the anticipation engine. The experimental part of this study found that inexpensive radar in a real-world setting does return useful data on target dynamics. The data produced by a radar system can be converted to target dynamical information by good, fast and inexpensive signal-processing techniques. Not only is the anticipatory sensor feasible, but further development under the sponsorship of the National Highway Traffic Safety Administration is necessary and desirable. There are a number of possible lines of follow-on investigation. The level of effort and expected benefits of various alternatives are discussed.

  16. Conoscopic holography for image registration: a feasibility study

    NASA Astrophysics Data System (ADS)

    Lathrop, Ray A.; Cheng, Tiffany T.; Webster, Robert J., III

    2009-02-01

    Preoperative image data can facilitate intrasurgical guidance by revealing interior features of opaque tissues, provided image data can be accurately registered to the physical patient. Registration is challenging in organs that are deformable and lack features suitable for use as alignment fiducials (e.g. liver, kidneys, etc.). However, provided intraoperative sensing of surface contours can be accomplished, a variety of rigid and deformable 3D surface registration techniques become applicable. In this paper, we evaluate the feasibility of conoscopic holography as a new method to sense organ surface shape. We also describe potential advantages of conoscopic holography, including the promise of replacing open surgery with a laparoscopic approach. Our feasibility study investigated use of a tracked off-the-shelf conoscopic holography unit to perform a surface scans on several types of biological and synthetic phantom tissues. After first exploring baseline accuracy and repeatability of distance measurements, we performed a number of surface scan experiments on the phantom and ex vivo tissues with a variety of surface properties and shapes. These indicate that conoscopic holography is capable of generating surface point clouds of at least comparable (and perhaps eventually improved) accuracy in comparison to published experimental laser triangulation-based surface scanning results.

  17. Direct solar pumping of semiconductor lasers: A feasibility study

    NASA Technical Reports Server (NTRS)

    Anderson, Neal G.

    1991-01-01

    The primary goals of the feasibility study are the following: (1) to provide a preliminary assessment of the feasibility of pumping semiconductor lasers in space directly focused sunlight; and (2) to identify semiconductor laser structures expected to operate at the lowest possible focusing intensities. It should be emphasized that the structures under consideration would provide direct optical-to-optical conversion of sunlight into laser light in a single crystal, in contrast to a configuration consisting of a solar cell or battery electrically pumping a current injection laser. With external modulation, such lasers may prove to be efficient sources for intersatellite communications. We proposed to develop a theoretical model of semiconductor quantum-well lasers photopumped by a broadband source, test it against existing experimental data where possible, and apply it to estimating solar pumping requirements and identifying optimum structures for operation for operation at low pump intensities. This report outlines our progress toward these goals. Discussion of several technical details are left to the attached summary abstract.

  18. Electric Power Delivery Testing Feasibility Study Task 6 Final Report

    SciTech Connect

    Thomas Tobin

    2009-07-01

    This Final Report is covers the completion of the Electric Power Delivery Testing Feasibility Study. The objective of this project was to research, engineer, and demonstrate high-power laboratory testing protocols to accurately reproduce the conditions on the electric power grid representing both normal load switching and abnormalities such as short-circuit fault protection. Test circuits, equipment, and techniques were developed and proven at reduced power levels to determine the feasibility of building a large-scale high-power testing laboratory capable of testing equipment and systems at simulated high-power conditions of the U.S. power grid at distribution levels up through 38 kiloVolts (kV) and transmission levels up through 230 kV. The project delivered demonstrated testing techniques, high-voltage test equipment for load testing and synthetic short-circuit testing, and recommended designs for future implementation of a high-power testing laboratory to test equipment and systems, enabling increased reliability of the electric transmission and distribution grid.

  19. Feasibility studies of a compact mm-wave linac FEL

    SciTech Connect

    Nassiri, A.; Kustom, R.L.; Kang, Y.W.; Song, J.

    1995-12-31

    Short wavelength FELs impose stringent requirements on the quality of the electron beams. The key factor in obtaining a single-pass UV or x-ray FEL is the generation of small emittance electron beams with ultra-high brightness. The pioneering work at Los Alamos National Laboratory in the last decade has resulted in a dramatic improvement in the production of high electron beam brightness and small beam emittance using rf photocathode gun. The lower bound on the emittance of a 1-nC bunch without any emittance compensation is on the order of 3 {pi} mm-mrad. This is well within the emittance requirement being considered here. Although the original R&D work at Argonne, in collaboration with the University of Illinois at Chicago and University of Wisconsin-Madison, has produced encouraging results in the area of rf structure design, x-ray mask fabrication, and LIGA processing (Lithography, Electroforming, and Molding), the goal to prove feasibility has not yet been achieved. In this paper, we will present feasibility studies for a compact single-pass mm-linac FEL based on LIGA technology. This system will consist of a photocathode rf gun operated at 30 GHz, a 50-MeV superconducting constant gradient structure operated at 60 GHz, and a microundulator with 1-mm period.

  20. A feasibility study for a manufacturing technology deployment center

    SciTech Connect

    Not Available

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  1. Parallel traveling-wave MRI: a feasibility study.

    PubMed

    Pang, Yong; Vigneron, Daniel B; Zhang, Xiaoliang

    2012-04-01

    Traveling-wave magnetic resonance imaging utilizes far fields of a single-piece patch antenna in the magnet bore to generate radio frequency fields for imaging large-size samples, such as the human body. In this work, the feasibility of applying the "traveling-wave" technique to parallel imaging is studied using microstrip patch antenna arrays with both the numerical analysis and experimental tests. A specific patch array model is built and each array element is a microstrip patch antenna. Bench tests show that decoupling between two adjacent elements is better than -26-dB while matching of each element reaches -36-dB, demonstrating excellent isolation performance and impedance match capability. The sensitivity patterns are simulated and g-factors are calculated for both unloaded and loaded cases. The results on B 1- sensitivity patterns and g-factors demonstrate the feasibility of the traveling-wave parallel imaging. Simulations also suggest that different array configuration such as patch shape, position and orientation leads to different sensitivity patterns and g-factor maps, which provides a way to manipulate B(1) fields and improve the parallel imaging performance. The proposed method is also validated by using 7T MR imaging experiments. PMID:21858863

  2. Wind height distribution influence on offshore wind farm feasibility study

    NASA Astrophysics Data System (ADS)

    Benassai, Guido; Della Morte, Renata; Matarazzo, Antonio; Cozzolino, Luca

    2015-04-01

    The economic feasibility of offshore wind power utilization depends on the favourable wind conditions offshore as compared to sites on land. The higher wind speeds have to compensate the additional cost of offshore developments. However, not only the mean wind speed is different, but the whole flow regime, as can be seen in the vertical wind speed profile. The commonly used models to describe this profile have been developed mainly for land sites, so they have to be verified on the basis of field data. Monin-Obukhov theory is often used for the description of the wind speed profile at a different height with respect to a measurement height. Starting from the former, , the profile is predicted using two parameters, Obukhov length and sea surface roughness. For situations with near-neutral and stable atmospheric stratification and long (>30km) fetch, the wind speed increase with height is larger than what is predicted from Monin-Obukhov theory. It is also found that this deviation occurs at wind speeds important for wind power utilization, mainly at 5-9 ms-1. In the present study the influence of these aspects on the potential site productivity of an offshore wind farm were investigated, namely the deviation from the theory of Monin-Obukhov due to atmospheric stability and the influence of the fetch length on the Charnock model. Both these physical effects were discussed and examined in view of a feasibility study of a site for offshore wind farm in Southern Italy. Available data consisted of time histories of wind speeds and directions collected by National Tidegauge Network (Rete Mareografica Nazionale) at the height of 10m a.s.l. in ports. The theory of Monin-Obukhov was used to extrapolate the data to the height of the wind blades, while the Charnock model was used to extend the wind speed on the sea surface from the friction velocity on the ground. The models described were used to perform calculations for a feasibility study of an offshore wind farm in Southern

  3. Percutaneous Transcatheter Aortic Disc Valve Prosthesis Implantation: A Feasibility Study

    SciTech Connect

    Sochman, Jan

    2000-09-15

    Purpose: Over the past 30 years there have been experimental efforts at catheter-based management of aortic valve regurgitation with the idea of extending treatment to nonsurgical candidates. A new catheter-based aortic valve design is described.Methods: The new catheter-delivered valve consists of a stent-based valve cage with locking mechanism and a prosthetic flexible tilting valve disc. The valve cage is delivered first followed by deployment and locking of the disc. In acute experiments, valve implantation was done in four dogs.Results: Valve implantation was successful in all four animals. The implanted valve functioned well for the duration of the experiments (up to 3 hr).Conclusion: The study showed the implantation feasibility and short-term function of the tested catheter-based aortic disc valve. Further experimental studies are warranted.

  4. Feasibility study for a secondary Na/S battery

    NASA Technical Reports Server (NTRS)

    Abraham, K. M.; Schiff, R.; Brummer, S. B.

    1979-01-01

    The feasibility of a moderate temperature Na battery was studied. This battery is to operate at a temperature in the range of 100-150 C. Two kinds of cathode were investigated: (1) a soluble S cathode consisting of a solution of Na2Sn in an organic solvent and (2) an insoluble S cathode consisting of a transition metal dichalcogenide in contact with a Na(+)ion conducting electrolyte. Four amide solvents, dimethyl acetamide, diethyl acetamide, N-methyl acetamide and acetamide, were investigated as possible solvents for the soluble S cathode. Results of stability and electrochemical studies using these solvents are presented. The dialkyl substituted amides were found to be superior. Although the alcohol 1,3-cyclohexanediol was found to be stable in the presence of Na2Sn at 130 C, its Na2Sn solutions did not appear to have suitable electrochemical properties.

  5. Feasibility study of modern airships. Phase 2: Executive summary

    NASA Technical Reports Server (NTRS)

    1977-01-01

    A feasibility study of modern airships has been completed. Three promising modern airship systems' concepts and their associated missions were studied; (1) a heavy-lift airship, employing a non-rigid hull and a significant amount of rotor lift, used for short-range transport and positioning of heavy military and civil payloads, (2) a VTOL (vertical take-off and landing), metalclad, partially buoyant airship used as a short-haul commercial transport; and (3) a class of fully-buoyant airships used for long-endurance Navy missions. The heavy-lift airship concept offers a substantial increase in vertical lift capability over existing systems and is projected to have lower total operating costs per ton-mile. The VTOL airship transport concept appears to be economically competitive with other VTOL aircraft concepts but can attain significantly lower noise levels. The fully-buoyant airship concept can provide an airborne platform with long endurance that satisfies many Navy mission requirements.

  6. Feasibility Study for an Asymmetric B Factory Based on PEP

    SciTech Connect

    Chattapadhyay, A.; Hitlin, D.; Porter, F.; Chin, Y.H.; Dell'Orco, D.; Forest, E.; Furman, M.; Garren, A.A.; Hoyer, E.; Kennedy, K.; Lambertson, G.; Lo, C.C.; Nishimura, H.; Oddone, P.; Ronan, M.; Sessler, A.; Taylor, B.; Taylor, C.; Zisman, M.; Barletta, W.; Allen, M.; Bloom, E.; Burke, D.; Cornacchia, M.; Davies-White, D.; Destaebler, H.; Donald, M.H.; Dorfan, J.; Feldman, G.; Rees, J.; Schsarz, H.; Sullivan, M.; Autin, B.; Tennyson, J.; Barbson, B.; Oide, K.

    1989-10-26

    This report addresses the feasibility of designing and constructing an asymmetric B-factory based on the PEP storage ring at SLAC that can ultimately reach a luminosity of 1 X 10{sup 34} cm{sup -2}s{sup -1}. Such a facility, operating at the {gamma}(4S) resonance, could be used to study mixing, rate decays, and CP violation in the B{bar B} system, and could also study tau and charm physics. The essential accelerator physics, engineering, and technology issues that must be addressed to successfully build this exciting and challenging facility are identified, and possible solutions, or R and D that will reasonable lead to such solutions, are described.

  7. Team clinical supervision in acute hospital wards: a feasibility study.

    PubMed

    O'Connell, Bev; Ockerby, Cherene M; Johnson, Susan; Smenda, Helen; Bucknall, Tracey K

    2013-03-01

    Clinical supervision provides a strategy to mitigate nurses' workplace stress and enhance retention, but the literature provides little guidance about its implementation beyond mental health nursing. This study explored the feasibility of implementing and evaluating ward-based team clinical supervision for general nurses on two separate wards at one public and one private hospital. Nurses completed the Work Environment Questionnaire pre- (n = 36) and postintervention (n = 27), and focus groups (n = 20) explored their perceptions of supervision. Staff were unfamiliar with clinical supervision, so information sessions were required. The questionnaire may not have been suitable to evaluate this type of intervention. Focus group findings revealed that team supervision improved communication, enhanced working relationships, and empowered nurses to challenge existing practices, which had a positive impact on their perceived stress. This study provides insights to guide implementation and evaluation of clinical supervision in acute settings. PMID:21531902

  8. Feasibility study of self-powered magnetorheological damper systems

    NASA Astrophysics Data System (ADS)

    Chen, Chao; Liao, Wei-Hsin

    2012-04-01

    This paper is aimed to provide a feasibility study of self-powered magnetorheological (MR) damper systems, which could convert vibration and shock energy into electrical energy to power itself under control. The self-powered feature could bring merits such as higher reliability, energy saving, and less maintenance for the MR damper systems. A self-powered MR damper system is proposed and modeled. The criterion whether the MR damper system is self-powered or not is proposed. A prototype of MR damper with power generation is designed, fabricated, and tested. The modeling of this damper is experimentally validated. Then the damper is applied to a 2 DOF suspension system under on-off skyhook controller, to obtain the self-powered working range and vibration control performance. Effects of key factors on the self-powered MR damper systems are studied. Design considerations are given in order to increase the self-powered working range.

  9. Tissue type characterization using photoacoustic power spectrum, a feasibility study

    NASA Astrophysics Data System (ADS)

    Tavakoli, Behnoosh; Goldstein, Seth D.; Kang, Jin U.; Choti, Michaal; Boctor, Emad M.

    2015-03-01

    The development of technologies capable of non-invasive characterization of tissue has the potential to significantly improve diagnostic and therapeutic medical interventions. In this study we investigated the feasibility of a noninvasive photoacoustic (PA) approach for characterizing biological tissues. The measurement was performed in the transmission mode with a wideband hydrophone while a tunable Q-switched Nd:YAG pulsed laser was used for illumination. The power spectrum of photoacoustic signal induced by a pulsed laser light from tissue was analyzed and features were extracted to study their correlation with tissue biomechanical properties. For a controlled study, tissue mimicking gelatin phantoms with different densities and equivalent optical absorptions were used as targets. The correlation between gelatin concentration of such phantoms and their mechanical properties were validated independently with a dynamic mechanical analyzer capable of calculating complex loss and storage moduli between two compression plates. It was shown that PA spectrums were shifted towards higher frequencies by increasing gelatin concentration. In order to quantify this effect, signal energy in two intervals of low and high frequency ranges were calculated. Gelatin concentration was correlated with PA energy in high frequency range with R2=0.94. Subsequently, PA signals generated from freshly resected human thyroid specimens were measured and analyzed in a similar fashion. We found that in aggregate, malignant thyroid tissue contains approximately 1.6 times lower energy in the high frequency range in comparison to normal thyroid tissue (p<0.01). This ratio increased with increasing illumination wavelength from 700 nm to 900nm. In summary, this study demonstrated the feasibility of using photoacoustic technique for characterizing tissue on the basis of viscoelastic properties of the tissue.

  10. Neuro-oncology dilemma: Tumour or tumefactive demyelinating lesion.

    PubMed

    Abdoli, Mohammad; Freedman, Mark S

    2015-11-01

    Tumefactive demyelinating lesions (TDLs) are not an uncommon manifestation of demyelinating disease but can pose diagnostic challenges in patients without a pre-existing diagnosis of multiple sclerosis (MS) as well as in known MS patients. Brain tumours can also arise in MS patients and can be seen in chronic MS patients as co-morbidities. Delayed diagnosis or unnecessary intervention or treatment will affect the ultimate prognosis of these patients. In this article, we will review some typical cases illustrating the dilemma and review the information that helps to differentiate the two conditions. The intention is not to present an extensive differential diagnosis of both entities, but to examine some typical examples when the decision arises to decide between the two. We take a somewhat different approach, by presenting the cases in "real time", allowing the readers to consider in their own minds which diagnosis they favour, discussing in detail some of the pertinent literature, then revealing later the actual diagnosis. We would urge readers to consider re-visiting their first thoughts about each case after reading the discussion, before reading the follow-up of each case. The overall objective is to highlight the real possibility of being forced to decide between these two entities in clinical practise, present a reasonable approach to help differentiate them and especially to focus on the possibility of TDLs in order to avoid unnecessary biopsy.

  11. Diagnosis and treatment in neuro-oncology: an oncological perspective

    PubMed Central

    Rees, J H

    2011-01-01

    Although brain tumours are rare compared with other malignancies, they are responsible, in many cases, for severe physical and cognitive disability and have a high case fatality rate (13% overall survival at 5 years). Gliomas account for over 60% of primary brain tumours and usually present with one or more symptoms of raised intracranial pressure, progressive neurological deficit, seizures, focal or global cognitive decline. The diagnosis is made by a combination of imaging and histological examination of tumour specimen. Contrast-enhanced MRI is the gold standard imaging modality and provides highly sensitive anatomical information about the tumour. Advanced imaging modalities provide complementary information about brain tumour metabolism, blood flow and ultrastructure and are being increasingly incorporated into routine clinical sequences. Imaging is essential for guiding surgery and radiotherapy treatments and for monitoring response to, and progression of, therapy. However, changes in imaging over time may be misinterpreted and lead to incorrect assumptions about the effectiveness of treatments. Thus, the disappearance of contrast enhancement and resolution of oedema after anti-angiogenesis treatments is seen early while conventional T2 weighted/FLAIR sequences demonstrate continual tumour growth (pseudoregression). Conversely imaging may suggest lack of efficacy of treatment e.g. increasing tumour size and contrast enhancement following chemoradiation for malignant gliomas (pseudoprogression), which then stabilise or resolve after a few months of continued treatment and that paradoxically may be associated with a better outcome. These factors have led to a re-evaluation of the role of standard sequences in the assessment of treatment response spurning interest in the development of quantitative biomarkers. PMID:22433832

  12. Industry progress report on neuro-oncology: Biotech update 2013.

    PubMed

    Ottenhausen, Malte; Bodhinayake, Imithri; Banu, Matei; Kesavabhotla, Kartik; Ray, Ashley; Boockvar, John A

    2013-11-01

    For the second time, The Brain Tumor Center of the Weill Cornell Brain and Spine Center, in collaboration with Voices Against Brain Cancer, hosted The Brain Tumor Biotech Summit in New York City in June 2013. After a very successful first summit in 2012, this innovative event has established a platform for intensive networking between neuro-oncologists, neurosurgeons, neuroscientists, members of the biotechnology and pharmaceutical communities, members of the financial community and leaders of non-profit organizations. This year's summit highlighted dendritic cell vaccines, novel antibody, heat shock protein and targeted therapies as well as exosome technologies, MRI-guided therapies and other novel drug delivery tools. This report presents a short overview of the current progress in brain tumor research and therapy as presented at the 2013 Brain Tumor Biotech Summit.

  13. 7 CFR 4280.179 - Selecting feasibility study grant applications for award.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... GRANTS Rural Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.179 Selecting feasibility study grant applications for award. The Agency will use the following... 7 Agriculture 15 2012-01-01 2012-01-01 false Selecting feasibility study grant applications...

  14. 7 CFR 4280.179 - Selecting feasibility study grant applications for award.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... GRANTS Rural Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.179 Selecting feasibility study grant applications for award. The Agency will use the following... 7 Agriculture 15 2014-01-01 2014-01-01 false Selecting feasibility study grant applications...

  15. Design and feasibility study for a portable oil recovery turbopump

    NASA Technical Reports Server (NTRS)

    1982-01-01

    A portable oil recovery turbopump concept, using the Firefly module as primer mover, for the offloading of distressed tank vessels is examined. The demands to be met both in terms of the type of petroleum to be offloaded, as well as the operational requirements placed on the pump, are studied with respect to the capability of different pump configurations. Two configurations, one a centrifugal type and the other a screw type pump, are developed and evaluated. While the centrifugal configuration is found to be effective in a large proportion of tank vessel offloading situations, the screw type will be required where high viscosity cargoes are involved. The feasibility of the turbopump concept, with the Firefly module as prime mover, is established.

  16. Feasibility study of an active target for the MEG experiment

    NASA Astrophysics Data System (ADS)

    Papa, A.; Cavoto, G.; Ripiccini, E.

    2014-03-01

    We consider the possibility to have an active target for the upgrade of the MEG experiment (MEG II). The active target should work as (1) a beam monitoring, to continuously measure the muon stopping rate and therefore provide a direct evaluation of the detector acceptance (or an absolute normalization of the stopped muon); and as (2) an auxiliary device for the spectrometer, to improve the determination of the muon decay vertex and consequently to achieve a better positron momentum and angular resolutions, detecting the positron from the muon decay. In this work we studied the feasibility of detecting minimum ionizing particle with a single layer of 250 μm fiber and the capability to discriminate between the signal induced by either a muon or a positron.

  17. Feasibility study for a transportation operations system cask maintenance facility

    SciTech Connect

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1991-01-01

    The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a waste management program for the disposition of spent nuclear fuel (SNF) and high-level waste (HLW). The program will include a transportation system for moving the nuclear waste from the sources to a geologic repository for permanent disposal. Specially designed casks will be used to safely transport the waste. The cask systems must be operated within limits imposed by DOE, the Nuclear Regulatory Commission (NRC), and the Department of Transportation (DOT). A dedicated facility for inspecting, testing, and maintaining the cask systems was recommended by the General Accounting Office (in 1979) as the best means of assuring their operational effectiveness and safety, as well as regulatory compliance. In November of 1987, OCRWM requested a feasibility study be made of a Cask Maintenance Facility (CMF) that would perform the required functions. 46 refs., 16 figs., 13 tabs.

  18. Feasibility study of a superconducting motor for electrical helicopter propulsion

    NASA Astrophysics Data System (ADS)

    Simons, C. A. B. A. E.; Sanabria-Walter, C.; Polinder, H.

    2014-05-01

    During the past decades, superconducting electrical machines have become more suitable to replace conventional iron based designs, because of their lower weight and higher torque density. These properties make them good candidates for use in More Electric Aircraft (MEA). Especially helicopter propulsion systems could benefit from the increased performance. This paper describes the feasibility study of a superconducting motor to be used for helicopter propulsion as part of a More Electric Aircraft (MEA). For this, the armature, field windings and cryostat are designed, aiming at meeting the difficult specifications. Since superconductors have virtually no electrical resistance when cooled down below a certain critical temperature, they can be used to build high field and low weight coils for electrical machines. Especially the possibility to not use iron can make the superconducting motor lighter with a higher power density compared with conventional Permanent Magnet (PM) motors.

  19. Microwave sanitization of color additives used in cosmetics: feasibility study.

    PubMed

    Jasnow, S B; Smith, J L

    1975-08-01

    Microwave exposure has been explored as a method of microbiologically sanitizing color additives used in cosmetic products. Selected microbiologically unacceptable cosmetic color additives, D&C red no. 7 Ca lake (certified synthetic organic color), carmine (natural organic color not subject to certification), and chromium hydroxide green (inorganic color not subject to certification), were submitted to microwave exposure. Gram-negative bacteria were eliminated, as verified by enrichment procedures, and levels of gram-positive bacteria were reduced. Generally, analytical and dermal safety studies indicated no significant alterations in physical, chemical, and toxicological properties of the colors. Sanitization was also successfully performed on other colors (D&C red no. 9 Ba lake, D&C red no. 12 Ba lake, D&C green no. 5, and FD&C red no. 4); initial physical and chemical tests were satisfactory. Results indicated that this method of sanitization is feasible and warrants further investigation.

  20. Carbon Dioxide Observational Platform System (CO-OPS), feasibility study

    NASA Technical Reports Server (NTRS)

    Bouquet, D. L.; Hall, D. W.; Mcelveen, R. P.

    1987-01-01

    The Carbon Dioxide Observational Platform System (CO-OPS) is a near-space, geostationary, multi-user, unmanned microwave powered monitoring platform system. This systems engineering feasibility study addressed identified existing requirements such as: carbon dioxide observational data requirements, communications requirements, and eye-in-the-sky requirements of other groups like the Defense Department, the Forestry Service, and the Coast Guard. In addition, potential applications in: earth system science, space system sciences, and test and verification (satellite sensors and data management techniques) were considered. The eleven month effort is summarized. Past work and methods of gathering the required observational data were assessed and rough-order-of magnitude cost estimates have shown the CO-OPS system to be most cost effective (less than $30 million within a 10 year lifetime). It was also concluded that there are no technical, schedule, or obstacles that would prevent achieving the objectives of the total 5-year CO-OPS program.

  1. Feasibility study for analyzing plasma-aerodynamic effects

    SciTech Connect

    Penetrante, B; Sherohman, J

    1999-05-07

    The purpose of this feasibility study was to conduct preliminary modeling to elucidate the mechanisms responsible for the effects observed in the Air Force Research Laboratory (AFRL) shock tube experiment. It was assumed that the plasma is simply a region of gas in the shock tube that has a higher gas temperature. Computational fluid dynamics (CFD) calculations were performed to simulate the propagation of a shock wave through the tube, using the same parameters in the experiment. Both 1- D and 3-D CFD calculations were performed to determine which effects can be explained simply by axial temperature gradients and which effects require the presence of radial temperature gradients. Discharge plasma physics calculations of a longitudinal glow discharge were then used to establish if the electrical currents used in the experiment are consistent with the gas temperature distributions that are necessary to explain the observed effects.

  2. Adaptive multibeam antennas for spacelab. Phase A: Feasibility study

    NASA Technical Reports Server (NTRS)

    Allen, C. C.; Applebaum, S. P.; Popowsky, W. J.; Wouch, G.

    1976-01-01

    The feasibility was studied of using adaptive multibeam multi-frequency antennas on the spacelab, and to define the experiment configuration and program plan needed for a demonstration to prove the concept. Three applications missions were selected, and requirements were defined for an L band communications experiment, an L band radiometer experiment, and a Ku band communications experiment. Reflector, passive lens, and phased array antenna systems were considered, and the Adaptive Multibeam Phased Array (AMPA) was chosen. Array configuration and beamforming network tradeoffs resulted in a single 3m x 3m L band array with 576 elements for high radiometer beam efficiency. Separate 0.4m x 0.4 m arrays are used to transmit and receive at Ku band with either 576 elements or thinned apertures. Each array has two independently steerable 5 deg beams, which are adaptively controlled.

  3. A Preliminary Feasibility Study On Seismic Monitoring Of Polymer Flooding

    NASA Astrophysics Data System (ADS)

    Nguyen, P. K.; Park, C.; Lim, B.; Nam, M.

    2012-12-01

    Polymer flooding using water with soluble polymers is an enhanced oil recovery technique, which intends to maximize oil-recovery sweep efficiency by minimizing fingering effects and as a result creating a smooth flood front; polymer flooding decreases the flow rates within high permeability zone while enhances those of lower permeabilities. Understanding of fluid fronts and saturations is critical to not only optimizing polymer flooding but also monitoring the efficiency. Polymer flooding monitoring can be made in single well scale with high-resolution wireline logging, in inter-well scale with tomography, and in reservoir scale with surface survey. For reservoir scale monitoring, this study makes a preliminary feasibility study based on constructing rock physics models (RPMs), which can bridge variations in reservoir parameters to the changes in seismic responses. For constructing RPMs, we change reservoir parameters with consideration of polymer flooding to a reservoir. Time-lapse seismic data for corresponding RPMs are simulated using a time-domain staggered-finite-difference modeling with implementation of a boundary condition of conventional perfect match layer. Analysis on time-lapse seismic data with respect to the changes in fluid front and saturation can give an insight on feasibility of surface seismic survey to polymer flooding. Acknowledgements: This work was supported by the Energy Efficiency & Resources of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Knowledge Economy (No. 2012T100201588). Myung Jin Nam was partially supported by the National Research Foundation of Korea(NRF) grant funded by the Korea government(MEST) (No. 2011-0014684).

  4. Feasibility of remote sensing for detecting thermal pollution. Part 1: Feasibility study. Part 2: Implementation plan. [coastal ecology

    NASA Technical Reports Server (NTRS)

    Veziroglu, T. N.; Lee, S. S.

    1973-01-01

    A feasibility study for the development of a three-dimensional generalized, predictive, analytical model involving remote sensing, in-situ measurements, and an active system to remotely measure turbidity is presented. An implementation plan for the development of the three-dimensional model and for the application of remote sensing of temperature and turbidity measurements is outlined.

  5. Dynamic electron arc radiotherapy (DEAR): a feasibility study.

    PubMed

    Rodrigues, Anna; Yin, Fang-Fang; Wu, Qiuwen

    2014-01-20

    Compared to other radiation therapy modalities, clinical electron beam therapy has remained practically unchanged for the past few decades even though electron beams with multiple energies are widely available on most linacs. In this paper, we present the concept of dynamic electron arc radiotherapy (DEAR), a new conformal electron therapy technique with synchronized couch motion. DEAR utilizes combination of gantry rotation, couch motion, and dose rate modulation to achieve desirable dose distributions in patient. The electron applicator is kept to minimize scatter and maintain narrow penumbra. The couch motion is synchronized with the gantry rotation to avoid collision between patient and the electron cone. In this study, we investigate the feasibility of DEAR delivery and demonstrate the potential of DEAR to improve dose distributions on simple cylindrical phantoms. DEAR was delivered on Varian's TrueBeam linac in Research Mode. In conjunction with the recorded trajectory log files, mechanical motion accuracies and dose rate modulation precision were analyzed. Experimental and calculated dose distributions were investigated for different energies (6 and 9 MeV) and cut-out sizes (1×10 cm(2) and 3×10 cm(2) for a 15×15 cm(2) applicator). Our findings show that DEAR delivery is feasible and has the potential to deliver radiation dose with high accuracy (root mean square error, or RMSE of <0.1 MU, <0.1° gantry, and <0.1 cm couch positions) and good dose rate precision (1.6 MU min(-1)). Dose homogeneity within ±2% in large and curved targets can be achieved while maintaining penumbra comparable to a standard electron beam on a flat surface. Further, DEAR does not require fabrication of patient-specific shields. These benefits make DEAR a promising technique for conformal radiotherapy of superficial tumors.

  6. Feasibility study of application of ductless fuel assembly to FBR

    SciTech Connect

    Itoh, K.; Shibahara, I.

    1996-07-01

    Feasibility studies on an application of the ductless fuel concept to an FBR core have been carried out in order to evaluate the basic features of the ductless core, especially in the fields of the thermal-hydraulic aspects and the mechanical behaviors. Regarding thermal-hydraulic aspects, analyses were performed by using a whole core thermal-hydraulic analysis code by making some modification for this study on the PWR code THINC. A small scaled ductless core model was prepared and a hydraulic experiment was carried out to study basic hydraulic characteristics of a ductless core. Core mechanical behaviors were analyzed focusing on the core irradiation bowing aspects and the seismic behaviors. Following features are revealed on the core structural behaviors: (1) the bowing stiffness of the ductless assembly is around 1/5 to 1/10 of that of the duct type assembly; (2) the contact loads between assemblies by the bowing effects are small through core cycles; (3) the damping of the ductless assemblies are so large that the seismic responses are small and the loads between assemblies are small due to occurring many contact points. Through this study it is expected that the concept of the ductless fuel can be applicable to FBR cores from the design view points of thermal-hydraulic and core mechanical behaviors.

  7. Feasibility Study of a Lunar Analog Bed Rest Model

    NASA Technical Reports Server (NTRS)

    Cromwell, Ronita L.; Platts, Steven H.; Yarbough, Patrice; Buccello-Stout, Regina

    2010-01-01

    The purpose of this study was to determine the feasibility of using a 9.5deg head-up tilt bed rest model to simulate the effects of the 1/6 g load to the human body that exists on the lunar surface. The lunar analog bed rest model utilized a modified hospital bed. The modifications included mounting the mattress on a sled that rolled on bearings to provide freedom of movement. The weight of the sled was off-loaded using a counterweight system to insure that 1/6 body weight was applied along the long axis (z-axis) of the body. Force was verified through use of a force plate mounted at the foot of the bed. A seating assembly was added to the bed to permit periods of sitting. Subjects alternated between standing and sitting positions throughout the day. A total of 35% of the day was spent in the standing position and 65% was spent sitting. In an effort to achieve physiologic fluid shifts expected for a 1/6 G environment, subjects wore compression stockings and performed unloaded foot and ankle exercises. Eight subjects (3 females and 5 males) participated in this study. Subjects spent 13 days in the pre-bed rest phase, 6 days in bed rest and 3 days post bed rest. Subjects consumed a standardized diet throughout the study. To determine feasibility, measures of subject comfort, force and plasma volume were collected. Subject comfort was assessed using a Likert scale. Subjects were asked to assess level of comfort (0-100) for 11 body regions and provide an overall rating. Results indicated minimal to no discomfort as most subjects reported scores of zero. Force measures were performed for each standing position and were validated against subject s calculated 1/6 body weight (r(sup 2) = 0.993). The carbon monoxide rebreathing technique was used to assess plasma volume during pre-bed rest and on the last day of bed rest. Plasma volume results indicated a significant decrease (p = 0.001) from pre to post bed rest values. Subjects lost on average 8.3% (sd = 6.1%) during the

  8. X-43D Conceptual Design and Feasibility Study

    NASA Technical Reports Server (NTRS)

    Johnson, Donald B.; Robinson, Jeffrey S.

    2005-01-01

    NASA s Next Generation Launch Technology (NGLT) Program, in conjunction with the office of the Director of Defense Research and Engineering (DDR&E), developed an integrated hypersonic technology demonstration roadmap. This roadmap is an integral part of the National Aerospace Initiative (NAI), a multi-year, multi-agency cooperative effort to invest in and develop, among other things, hypersonic technologies. This roadmap contains key ground and flight demonstrations required along the path to developing a reusable hypersonic space access system. One of the key flight demonstrations required for systems that will operate in the high Mach number regime is the X-43D. As currently conceived, the X-43D is a Mach 15 flight test vehicle that incorporates a hydrogen-fueled scramjet engine. The purpose of the X-43D is to gather high Mach number flight environment and engine operability information which is difficult, if not impossible, to gather on the ground. During 2003, the NGLT Future Hypersonic Flight Demonstration Office initiated a feasibility study on the X-43D. The objective of the study was to develop a baseline conceptual design, assess its performance, and identify the key technical issues. The study also produced a baseline program plan, schedule, and cost, along with a list of key programmatic risks.

  9. Feasibility of a porcine oral mucosa equivalent: a preclinical study.

    PubMed

    Kinikoglu, Beste; Hemar, Julie; Hasirci, Vasif; Breton, Pierre; Damour, Odile

    2012-08-01

    Oral tissue engineering aims to treat and fill tissue deficits caused by congenital defects, facial trauma, or malignant lesion surgery, as well as to study the biology of oral mucosa. The Food and Drug Administration (FDA) and the European Medicines Agency (EMA) require a large animal model to evaluate cell-based devices, including tissue-engineered oral mucosa, prior to initiating human clinical studies. Porcine oral mucosa is non-keratinized and resembles that of humans more closely than any other animal in terms of structure and composition; however, there have not been any reports on the reconstruction of a porcine oral mucosa equivalent, probably due to the difficulty to culture porcine fibroblasts. In this study, we demonstrate the feasibility of a 3D porcine oral mucosa equivalent based on a collagen-GAG-chitosan scaffold, as well as reconstructed porcine epithelium by using an amniotic membrane as support, or without any support in form of epithelial cell sheets by using thermoresponsive culture plates. Explants technique was used for the isolation of the porcine fibroblasts and a modified fibroblast medium containing 20% fetal calf serum was used for their culture. The histological and transmission electron microscopic analyses of the resulting porcine oral mucosa models showed the presence of non-keratinized epithelia expressing keratin 13, the major differentiation marker of non-keratinized oral mucosa, in all models, and the presence of newly synthesized collagen fibers in the lamina propria equivalent of the full-thickness model, indicating the functionality of porcine fibroblasts. PMID:22309108

  10. GRAF - A GRACE follow-on mission feasibility study

    NASA Astrophysics Data System (ADS)

    Flechtner, F.; Neumayer, K. H.; Doll, B.; Munder, J.; Reigber, Ch.; Raimondo, J. C.

    2009-04-01

    After more than 6 years of very successful operation in orbit, the US-German GRACE mission has demonstrated in a very impressive way its outstanding capability to monitor mass motions in the Earth system with unprecedented accuracy and temporal resolution. These results have stimulated many novel research activities in hydrology, oceanography, glaciology, geophysics and geodesy, which also indicate that long term monitoring of such mass motions, possibly with improved spatial and temporal resolution is a must for further understanding of various phenomena. GRACE had been designed for 5 years lifetime, but due to the robust design and some margin on S/C consumables, GRACE can operate likely until 2012, thus about 10 years. Considering this, GFZ Potsdam has recently launched a short study with STI as industrial partner, holding a wealth of GRACE technical experience, to investigate the feasibility/boundaries of a follow on mission taking into account system, cost, programmatic and schedule aspects. An additional goal of the study is to work out some improvement in terms of temporal and spatial resolution, based on lessons learned from GRACE and based on further developed state of the art technology. These results will form the basis for further discussions with potential national and international partners in 2009. The presentation will focus on the main targets of the study.

  11. Radiochromic films for dental CT dosimetry: a feasibility study.

    PubMed

    Rampado, O; Bianchi, S D; Peruzzo Cornetto, A; Rossetti, V; Ropolo, R

    2014-02-01

    Dental CT dose evaluations are commonly performed using thermoluminescent dosimeters (TLD) inside anthropomorphic phantoms. Radiochromic films with good sensitivity in the X-ray diagnostic field have recently been developed and are commercially available as GAFCHROMIC XR-QA. There are potential advantages in the use of radiochromic films such as a more comprehensive dosimetry thanks to the adjustable size of the film samples. The purpose of this study was to investigate the feasibility of using radiochromic films for dental CT dose evaluations. Film samples were cut with a width of 5mm and a length of 25 mm (strips), the same size as the Alderson Rando anthropomorphic phantom holes used in this study. Dental CT dose measurements were performed using simultaneously both TLD and radiochromic strips in the same phantom sites. Two equipment types were considered for dental CT examinations: a 16 slice CT and a cone beam CT. Organ equivalent doses were then obtained averaging the measurements from the sites of the same organ and effective doses were calculated using ICRP 103 weighting factors. The entire procedure was repeated four times for each CT in order to compare also the repeatability of the two dosimeter types. A linear correlation was found between the absorbed dose evaluated with radiochromic films and with TLD, with slopes of 0.930 and 0.944 (correlation r>0.99). The maximum difference between the two dosimeter's measurements was 25%, whereas the average difference was 7%. The measurement repeatability was comparable for the two dosimeters at cumulative doses above 15 mGy (estimated uncertainty at 1 sigma level of about 5%), whereas below this threshold radiochromic films show a greater dispersion of data, of about 10% at 1 sigma level. We obtained, using respectively Gafchromic and TLD measurements, effective dose values of 107 μSv and 117 μSv (i.e. difference of 8.6%) for the cone beam CT and of 523 μSv and 562 μSv (i.e. difference of 7%) for the

  12. Quantification of manganese in human hand bones: a feasibility study

    NASA Astrophysics Data System (ADS)

    Aslam; Pejović-Milić, A.; Chettle, D. R.; McNeill, F. E.

    2008-08-01

    Manganese is both an essential element to human health and also toxic when humans are exposed to excessive levels, particularly by means of inhalation. Biological monitoring of manganese exposure is problematic. It is subject to homeostasis; levels in blood (or serum/plasma) reflect only the most recent exposure and rapidly return to within normal ranges, even when there has been a temporary excursion in response to exposure. In this context, we have been developing a non-invasive technique for measurement of manganese stored in bone, using in vivo neutron activation analysis. Following preliminary feasibility studies, the technique has been enhanced by two significant infrastructure advances. A specially designed irradiation facility serves to maximize the activation of manganese with respect to the dose of ionizing radiation. Secondly, an array of eight NaI(Tl) crystals provides a detection system with very close to 4π geometry. This feasibility study, using neutron activation analysis to measure manganese in the bones of the hand, takes two features into account. Firstly, there is considerable magnesium present in the bone and this produces a spectral interference with the manganese. The 26Mg(n,γ)27Mg reaction produces γ-rays of 0.843 MeV from the decay of 27Mg, which interfere with the 0.847 MeV γ-rays from the decay of 56Mn, produced by the 55Mn(n,γ)56Mn reaction. Secondly, this work provides estimates of the levels of manganese to be expected in referent subjects. A revised estimate has been made from the most recent literature to explore the potential of the technique as a suitable means of screening patients and people exposed to excessive amounts of Mn who could develop many-fold increased levels of Mn in bones as demonstrated through various animal studies. This report presents the enhancements to the neutron activation system, by which manganese can be measured, which resulted in a detection limit in the hand of human subjects of 1.6 µg/g Ca. It

  13. A Feasibility Study of Space VLBI for Geodesy and Geodynamics

    NASA Astrophysics Data System (ADS)

    Kulkarni, Madhav Narayan

    1992-01-01

    Space Very Long Baseline Interferometry (VLBI) is an extension of the ground based VLBI to the space. With the launching of two or more Space VLBI satellites in the future, Space VLBI observations will be available for astrometric, geodetic and geodynamic applications. This new technique holds potential for various important applications including monitoring Earth rotation and interconnection of the reference frames used in geodesy and geodynamics. The aim of this feasibility study has been to investigate the possibility of precise estimation of geodetic parameters, with emphasis on the Earth rotation parameters (ERP's), from Space VLBI observations. A brief description of the Space VLBI technique, it's possible applications, and the Space VLBI missions being planned has been given. Estimability analysis to investigate the estimability of geodetic parameters from Space VLBI observations has been carried out and a simplified mathematical model is derived in terms of estimable parameters. Results of sensitivity analysis carried out to study the sensitivity of the Space VLBI observables to the geodetic parameters of interest, including the number of these parameters and random errors in their a priori values, have been presented. Some of the dominant systematic effects including atmospheric refraction, solar radiation pressure and relativistic effects have also been investigated. Simulation studies have been carried out to study the influence of these systematic effects and a priori information on the estimation of the Earth rotation parameters. The results from the simulation studies indicate that it may be possible to use the Space VLBI technique for monitoring Earth rotation and polar motion, only if the orbital systematic effects can be modeled to a high degree of accuracy (or the satellites can be tracked, with high accuracy, independently), and precise a priori information on station coordinates from other sources is used. A brief description of the Space VLBI

  14. Final Report - Wind and Hydro Energy Feasibility Study - June 2011

    SciTech Connect

    Jim Zoellick; Richard Engel; Rubin Garcia; Colin Sheppard

    2011-06-17

    This feasibility examined two of the Yurok Tribe's most promising renewable energy resources, wind and hydro, to provide the Tribe detailed, site specific information that will result in a comprehensive business plan sufficient to implement a favorable renewable energy project.

  15. Study on Feasibility of MBO in College Management

    ERIC Educational Resources Information Center

    Liu, Xihuai

    2009-01-01

    At first, MBO was widely applied in management of enterprises. This paper organically makes some characteristics of MBO and college management together to talk about the feasibility of MBO in college management.

  16. Feasibility studies for a wireless 60 GHz tracking detector readout

    NASA Astrophysics Data System (ADS)

    Dittmeier, S.; Schöning, A.; Soltveit, H. K.; Wiedner, D.

    2016-09-01

    The amount of data produced by highly granular silicon tracking detectors in high energy physics experiments poses a major challenge to readout systems. At high collision rates, e.g. at LHC experiments, only a small fraction of data can be read out with currently used technologies. To cope with the requirements of future or upgraded experiments new data transfer techniques are required which offer high data rates at low power and low material budget. Wireless technologies operating in the 60 GHz band or at higher frequencies offer high data rates and are thus a promising upcoming alternative to conventional data transmission via electrical cables or optical fibers. Using wireless technology, the amount of cables and connectors in detectors can be significantly reduced. Tracking detectors profit most from a reduced material budget as fewer secondary particle interactions (multiple Coulomb scattering, energy loss, etc.) improve the tracking performance in general. We present feasibility studies regarding the integration of the wireless technology at 60 GHz into a silicon tracking detector. We use spare silicon strip modules of the ATLAS experiment as test samples which are measured to be opaque in the 60 GHz range. The reduction of cross talk between links and the attenuation of reflections is studied. An estimate of the maximum achievable link density is given. It is shown that wireless links can be placed as close as 2 cm next to each other for a layer distance of 10 cm by exploiting one or several of the following measures: highly directive antennas, absorbers like graphite foam, linear polarization and frequency channeling. Combining these measures, a data rate area density of up to 11 Tb/(s·m2) seems feasible. In addition, two types of silicon sensors are tested under mm-wave irradiation in order to determine the influence of 60 GHz data transmission on the detector performance: an ATLAS silicon strip sensor module and an HV-MAPS prototype for the Mu3e

  17. Feasibility study of an image slicer for future space application

    NASA Astrophysics Data System (ADS)

    Calcines, A.; Ichimoto, K.

    2014-08-01

    This communication presents the feasibility study of an image slicer for future space missions, especially for the integral field unit (IFU) of the SUVIT (Solar UV-Visible-IR telescope) spectro-polarimeter on board the Japanese-led solar space mission Solar-C as a backup option. The MuSICa (Multi-Slit Image slicer based on collimator-Camera) image slicer concept, originally developed for the European Solar Telescope, has been adapted to the SUVIT requirements. The IFU will reorganizes a 2-D field of view of 10 x 10 arcsec2 into three slits of 0.18 arcsec width by 185.12 arcsec length using flat slicer mirrors of 100 μm width. The layout of MuSICa for Solar-C is telecentric and offers an optical quality limited by diffraction. The entrance for the SUVIT spectro-polarimeter is composed by the three IFU slits and one ordinal long slit to study, using high resolution spectro-polarimetry, the solar atmosphere (Photosphere and Chromosphere) within a spectral range between 520 nm (optionally 280 nm) and 1,100 nm.

  18. Feasibility study on rotorcraft blade morphing in hovering

    NASA Astrophysics Data System (ADS)

    Testa, Claudio; Leone, Stefania; Ameduri, Salvatore; Concilio, Antonio

    2005-05-01

    The study of acoustic noise generated by helicopter main rotors is the object of many theoretical and experimental investigations because of the complexity of the related physical phenomena and its strong influence on the vehicle performance. One of the main targets of the FriendCopter European Project is to define technical solutions aimed at improving the helicopter acoustic performance. In this work some related activities are described. The extremely complex operating environment of a helicopter rotor contributes to noise generation through several distinct mechanisms: among them, blade vortex interaction noise (BVI) results extremely annoying when it occurs. One method for BVI alleviation is to increase the separation of the tip vortex from the rotor plane using an adaptive blade tip (anhedral configuration) to diffuse the tip vortex or to displace it. In this work, as a first step of the investigation, a feasibility study on blade tip morphing will be addressed, neglecting any aeroacoustic estimation; a specific flight condition will be considered to evaluate the efficiency of a particular smart system based on the coupled action of shape memory alloys (SMAs) and magneto-rheological fluids (MRFs). Such a kind of actuation system has to realise an on-off mechanism through which the tip blade displacement is maximised: the properties of the MR fluid will be exploited to selectively reduce the bending stiffness spanwise so that the SMA actuation is increased. A theoretical model and numerical investigations will be shown to evaluate the reliability and the effectiveness of the integrated system.

  19. Genetic studies in pediatric ITP: outlook, feasibility and requirements

    PubMed Central

    Bergmann, Anke K.; Grace, Rachael F.; Neufeld, Ellis J.

    2010-01-01

    The genomic revolution in medicine has not escaped attention of clinicians and scientists involved in medical management and research studies of immune thrombocytopenic purpura (ITP). In principle, ITP biology and care will benefit greatly from modern methods to understand the patterns of gene expression and genetic markers associated with fundamental parameters of the disease including predictors of remission; risk factors for severity; determinants of response to various therapies; and possibly biological sub-types. However, applying modern genetics to ITP carries severe challenges: (i) achieving adequate sample sizes is a fundamental problem because ITP is rare (and in pediatric ITP, chronic cases constitute only about 1/4 of the total); (ii) familial transmission of childhood ITP is so rare that a convincing pedigree requires consideration of other immunologic or hematologic disorders; (iii) ITP is probably biologically heterogeneous, based on clinical observations, immunological studies and animal models. Here we review the advantages and disadvantages of potential genetic approaches. Sufficient information is available to set reasonable bounds on which genetic analyses of ITP are feasible, and how they are most likely to be accomplished. The highest priority is for accurate phenotypes to compare to genetic analyses. Several registries worldwide hold promise for accomplishing this goal. PMID:20309691

  20. Feasibility study on pliant media drying using fluidized bed dryer

    NASA Astrophysics Data System (ADS)

    Zakaria, J. H.; Zaid, M. H. H. M.; Batcha, M. F. M.; Asmuin, N.

    2015-09-01

    The usage of pliant media for blasting in surface preparation has gained substantial interest in various industries, particularly oil and gas. Being a clean technology, this relatively new method of surface preparation has become an alternative to conventional abrasive blasting technique which lowers fugitive emissions from blasting process and hence lowering risk to workers in the industry. Despite proven to be effective and cost efficient, the usage of pliant media in tropical climate poses a new challenge due to the torrential rain in the monsoon season. During rainy and wet conditions, the pliant media was literally soaked and the recovery rate of the pliant media for a continuous blasting becomes retarded. A viable technique for drying of this pliant media has then become imperative. The present study proposes to dry water laden pliant media in a Swirling Fluidized Bed Dryer (SFBD). In this preliminary study, three bed loadings of 1.7, 2.0 and 2.3 kg of pliant media was dried in the SfBd at 80°C, 90°C and 100°C. The experimental works revealed that the SFBD has shown excellent potential to dry the pliant media with a relatively short drying time. The behaviour of moisture ratio and drying rate against time are discussed. The findings conclude that the SFBD is a feasible technique for wet pliant media drying and can be extended for continuous processing system.

  1. Towards optimal imaging with PET: an in silico feasibility study

    NASA Astrophysics Data System (ADS)

    McNamara, A. L.; Toghyani, M.; Gillam, J. E.; Wu, K.; Kuncic, Z.

    2014-12-01

    The efficacy of Positron Emission Tomography (PET) imaging relies fundamentally on the ability of the system to accurately identify true coincidence events. With existing systems, this is currently accomplished with an energy acceptance criterion followed by correction techniques to remove suspected false coincidence events. These corrections generally result in signal and contrast loss and thus limit the PET system’s ability to achieve optimum image quality. A key property of annihilation radiation is that the photons are polarised with respect to each other. This polarisation correlation offers a potentially powerful discriminator, independent of energy, to accurately identify true events. In this proof of concept study, we investigate how photon polarisation information can be exploited in PET imaging by developing a method to discriminate true coincidences using the polarisation correlation of annihilation pairs. We implement this method using a Geant4 PET simulation of a GE Advance/Discovery LS system and demonstrate the potential advantages of the polarisation coincidence selection method over a standard energy criterion method. Current PET ring detectors are not capable of exploiting the polarisation correlation of the photon pairs. Compton PET systems, however are promising candidates for this application. We demonstrate the feasibility of a two-component Compton camera system in identifying true coincidences with Monte Carlo simulations. Our study demonstrates the potential of improving signal gain using polarisation, particularly for high photon emission rates. We also demonstrate the ability of the Compton camera at exploiting this polarisation correlation in PET.

  2. Structural design feasibility study of Space Station long spacer truss

    NASA Technical Reports Server (NTRS)

    Armand, Sasan C.; Funk, Gregory P.; Dohogne, Caroline A.

    1994-01-01

    The structural design and configuration feasibility of the long spacer truss assembly that will be used as part of the Space Station Freedom is the focus of this study. The structural analysis discussed herein is derived from the transient loading events presented in the Space Transportation System Interface Control Document (STS ICD). The transient loading events are liftoff, landing, and emergency landing loads. Quasi-static loading events were neglected in this study since the magnitude of the quasi-static acceleration factors is lower than that of the transient acceleration factors. Structural analysis of the proposed configuration of the long spacer truss with four longerons indicated that negative safety margins are possible. As a result, configuration changes were proposed. The primary configuration change suggested was to increase the number of truss longerons to six. The six-longeron truss appears to be a more promising structure than the four-longeron truss because it offers a positive margin of safety and more volume in its second bay (BAY2). This additional volume can be used for resupply of some of the orbital replacement units (such as a battery box). Note that the design effort on the long spacer truss has not fully begun and that calculations and reports of the negative safety margins are, to date, based on concept only.

  3. Feasibility study of using industrial robot for ultrasound testing

    SciTech Connect

    Hsia, T.C. . Dept. of Electrical Engineering and Computer Science)

    1989-02-13

    The purpose of this program is to study the feasibility of employing an articulated industrial robot arm to perform ultrasound scanning of a work piece. The robot arm suitable for such application is the Unimation PUMA 560 manipulator with six degrees of freedom. This research is intended to study the basic properties of several issues which arise in the operations of the UTB facility at LLNL. These issues involve the understanding of control algorithms for collision-free motions of the robot arm with and without redundant kinematics, trajectory generation schemes for automated surface tracking based on 3D CAD/CAM model of the work piece, and the effective use of computer vision and ultrasound sensor to achieve position calibration of a work piece and on-line trajectory modification for accurate surface tracking. The robotics research laboratory at UC Davis has a research robotic system based on a six degrees-of-freedom Unimation PUMA 560 arm and a VAL-II controller. This system is used as a research tool for the investigation. 20 refs., 8 figs.

  4. Visualization of microcalcifications using photoacoustic imaging: feasibility study

    NASA Astrophysics Data System (ADS)

    Hsiao, Tsai-Chu; Wang, Po-Hsun; Fan, Chih-Tai; Cheng, Yao-You; Li, Meng-Lin

    2011-03-01

    Recently, photoacoustic imaging has been intensively studied for blood vessel imaging, and shown its capability of revealing vascular features suggestive of malignancy of breast cancer. In this study, we explore the feasibility of visualization of micro-calcifications using photoacoustic imaging. Breast micro-calcification is also known as one of the most important indicators for early breast cancer detection. The non-ionizing radiation and speckle free nature of photoacoustic imaging overcomes the drawbacks of current diagnostic tools - X-ray mammography and ultrasound imaging, respectively. We employed a 10-MHz photoacoustic imaging system to verify our idea. A sliced chicken breast phantom with granulated calcium hydroxyapatite (HA) - major chemical composition of the breast calcification associated with malignant breast cancers - embedded was imaged. With the near infared (NIR) laser excitation, it is shown that the distribution of ~500 μm HAs can be clearly imaged. In addition, photoacoustic signals from HAs rivals those of blood given an optimal NIR wavelength. In summary, photoacoustic imaging shows its promise for breast micro-calcification detection. Moreover, fusion of the photoacoustic and ultrasound images can reveal the location and distribution of micro-calcifications within anatomical landmarks of the breast tissue, which is clinically useful for biopsy and diagnosis of breast cancer staging.

  5. Feasibility Pilot Study: Training Soft Skills in Virtual Worlds.

    PubMed

    Abshier, Patricia

    2012-04-01

    In a world where funding is limited, training for healthcare professionals is turning more and more to distance learning in an effort to maintain a knowledgeable and skilled work force. In 2010, Cicatelli Associates, Inc. began exploring the feasibility of using games and virtual worlds as an alternative means to teach skills-training in a distance-learning environment. The pilot study was conducted with six individuals familiar with general counseling and communication skills used by the healthcare industry to promote behavior change. Participants reported that the venue, although challenging at first, showed great potential for use with healthcare providers, as it allowed for more interaction and activities than traditional Webinars. However, there are significant limitations that must be overcome in order for this healthcare training modality to be utilized on a large scale. These limitations included a lack of microgestures and issues regarding the technology being used. In spite of the limitations, however, the potential use of virtual worlds for the training of healthcare providers exists and should be researched further. This article discusses the need and intended benefits of virtual world training as well as the results and conclusions of the pilot study. PMID:26193192

  6. Feasibility Pilot Study: Training Soft Skills in Virtual Worlds.

    PubMed

    Abshier, Patricia

    2012-04-01

    In a world where funding is limited, training for healthcare professionals is turning more and more to distance learning in an effort to maintain a knowledgeable and skilled work force. In 2010, Cicatelli Associates, Inc. began exploring the feasibility of using games and virtual worlds as an alternative means to teach skills-training in a distance-learning environment. The pilot study was conducted with six individuals familiar with general counseling and communication skills used by the healthcare industry to promote behavior change. Participants reported that the venue, although challenging at first, showed great potential for use with healthcare providers, as it allowed for more interaction and activities than traditional Webinars. However, there are significant limitations that must be overcome in order for this healthcare training modality to be utilized on a large scale. These limitations included a lack of microgestures and issues regarding the technology being used. In spite of the limitations, however, the potential use of virtual worlds for the training of healthcare providers exists and should be researched further. This article discusses the need and intended benefits of virtual world training as well as the results and conclusions of the pilot study.

  7. Study of recycling feasibility. Final report, May 1993-March 1996

    SciTech Connect

    Pribanic, J.A.S.; Smith, J.A.; Jennings, P.W.; Bell, C.A.

    1996-03-01

    This report describes a feasibility of recycling asphalt pavements using two major analytical techniques: High Performance Gel Permeation Chromatography (HP-GPC) and Dynamic Mechanical Analysis (DMA). HP-GPG probes the chemistry of the asphalt cement. DMA measures certain physical characteristics of the asphalt cement and of the mix. Four projects that had been recycled, three by hot methods, the other by a cold, in-place process (CIPR), were studied. Specifically, the HP-GPC characteristics of the asphalts before and after recycling and the resilient moduli of some recycled mixtures were obtained. In addition, three sources of recovered asphalt pavement were subjected to modeling of hot and cold recycling strategies and tested by DMA on mixes as well as by HP-GPC. Finally, an additional five pavements that are candidates for recycling were sampled and the asphalt cements extracted for HP-GPC and DMA testing using both hot and cold recycling simulations. This report details the study procedures and discusses the data and their interpretations. Included in this report is data on the HP-GPC characteristics of the asphalt cements available in the state of Montana in 1993. Also, testing of asphalt cements from an experimental project and a distressed pavement is addressed briefly.

  8. A Feasibility Study of Geologic Water Storage in Arid Regions

    NASA Astrophysics Data System (ADS)

    Fairley, J. P.; Preuit, T.

    2001-05-01

    An important control on the carrying capacity of arid and semi-arid regions is the ability to develop and maintain a reliable water supply for domestic and agricultural use. In the semi-arid highlands of southern Peru, the pre-Columbian Incas developed a technique of collecting and storing basin yields by controlling the discharge boundary of an existing aquifer. This water resource management strategy has been dubbed "Geologic Water Storage" (Fairley, in review). Yield from at least one such system near Cuzco, Peru, has provided a reliable source of irrigation water for rural farmers to the present day. The geologic water storage systems of southern Peru suggested the possibility of developing a similar system to water stock in rural Idaho. Annual precipitation in Idaho is about one-third that of southern Peru, and obtaining an adequate stock water supply is often problematic. The application of a simple lumped capacitance model to a selected basin in central Idaho showed that it may be physically and economically feasible to modify the basin characteristics to prolong water availability at the site. A more detailed study of this problem, that includes field characterization of the site, is necessary to substantiate the model results. If further studies and field trials confirm the viability of geologic water storage, this approach may find applications in many rural and developing areas, both nationally and internationally.

  9. Feasibility study of geothermal heating, Modoc Lassen housing project

    SciTech Connect

    Not Available

    1981-11-01

    This study evaluates the feasibility of using geothermal water for space and domestic water heating systems at the elderly housing project now ready for construction at the Modoc Lassen Indian Reservation. For the six units considered, the space heating load is four times the domestic water heating load. Since the geothermal water temperature is uncertain, two scenarios were evaluated. In the first, which assumes 160/sup 0/F supply temperature, the geothermal system is assumed to satisfy the entire space and domestic water heating loads. In the second, which assumes the supply temperature to be less than 120/sup 0/F at the wellhead only space heating is provided. The economics of the first scenario are quite favorable. The additional expenditure of $15,630 is projected to save $3522 annually at current energy costs, and the life cycle cost study projects a discounted rate of return on the investment of 44.4%. Surprisingly, the investment is even more favorable for the second scenario, due to the higher cost and lower resultant savings for the domestic water components. Forced air space heating from geothermal is recommended. Domestic water heating is recommended pending additional information on supply water temperature.

  10. Structural Design Feasibility Study for the Global Climate Experiment

    SciTech Connect

    Lewin,K.F.; Nagy, J.

    2008-12-01

    Neon, Inc. is proposing to establish a Global Change Experiment (GCE) Facility to increase our understanding of how ecological systems differ in their vulnerability to changes in climate and other relevant global change drivers, as well as provide the mechanistic basis for forecasting ecological change in the future. The experimental design was initially envisioned to consist of two complementary components; (A) a multi-factor experiment manipulating CO{sub 2}, temperature and water availability and (B) a water balance experiment. As the design analysis and cost estimates progressed, it became clear that (1) the technical difficulties of obtaining tight temperature control and maintaining elevated atmospheric carbon dioxide levels within an enclosure were greater than had been expected and (2) the envisioned study would not fit into the expected budget envelope if this was done in a partially or completely enclosed structure. After discussions between NEON management, the GCE science team, and Keith Lewin, NEON, Inc. requested Keith Lewin to expand the scope of this design study to include open-field exposure systems. In order to develop the GCE design to the point where it can be presented within a proposal for funding, a feasibility study of climate manipulation structures must be conducted to determine design approaches and rough cost estimates, and to identify advantages and disadvantages of these approaches including the associated experimental artifacts. NEON, Inc requested this design study in order to develop concepts for the climate manipulation structures to support the NEON Global Climate Experiment. This study summarizes the design concepts considered for constructing and operating the GCE Facility and their associated construction, maintenance and operations costs. Comparisons and comments about experimental artifacts, construction challenges and operational uncertainties are provided to assist in selecting the final facility design. The overall goal

  11. Feasibility of Protein Turnover Studies in Prototroph Saccharomyces cerevisiae Strains

    PubMed Central

    Martin-Perez, Miguel; Villén, Judit

    2015-01-01

    Quantitative proteomics studies of yeast that use metabolic labeling with amino acids rely on auxotrophic mutations of one or more genes on the amino acid biosynthesis pathways. These mutations affect yeast metabolism and preclude the study of some biological processes. Overcoming this limitation, it has recently been described that proteins in a yeast prototrophic strain can also be metabolically labeled with heavy amino acids. However, the temporal profiles of label incorporation under the different phases of the prototroph’s growth have not been examined. Labeling trajectories are important in the study of protein turnover and dynamics, in which label incorporation into proteins is monitored across many time points. Here we monitored protein labeling trajectories for 48 h after a pulse with heavy lysine in a yeast prototrophic strain and compared them with those of a lysine auxotrophic yeast. Labeling was successful in prototroph yeast during exponential growth phase but not in stationary phase. Furthermore, we were able to determine the half-lives of more than 1700 proteins during exponential phase of growth with high accuracy and reproducibility. We found a median half-life of 2 h in both strains, which corresponds with the cellular doubling time. Nucleolar and ribosomal proteins showed short half-lives, whereas mitochondrial proteins and other energy production enzymes presented longer half-lives. Except for some proteins involved in lysine biosynthesis, we observed a high correlation in protein half-lives between prototroph and auxotroph strains. Overall, our results demonstrate the feasibility of using prototrophs for proteomic turnover studies and provide a reliable data set of protein half-lives in exponentially growing yeast. PMID:25767917

  12. Crosswell electromagnetic imaging for geothermal reservoir characterization - a feasibility study

    NASA Astrophysics Data System (ADS)

    Samrock, Friedemann; Saar, Martin O.

    2016-04-01

    Most regions in the world do not have ready access to natural convective hydrothermal resources. To use deep geothermal heat as a viable energy resource in low-permeability formations, permeable fracture networks have to be created artificially to enable deep fluid circulation for advective heat transport to a production well. Such generation of enhanced geothermal systems (EGS) is studied in the "Deep Underground Geothermal (DUG)" laboratory at the Grimsel pass, Switzerland. Here, an underground experiment is conducted by hydraulically stimulating a pre-existing shear zone within crystalline rock. The objectives of this project are to better describe and understand the processes acting during reservoir generation. We perform a feasibility study to evaluate the capability of low-frequency crosswell electromagnetic (EM) tomography for mapping of stimulation-induced changes in electrical conductivity. First numerical results show that crosswell EM data are generally sensitive to the inter-well conductivity distribution, which is affected by properties such as interconnected porosity, permeability and the presence of fluids. It thereby provides important information for characterization of potential EGS reservoirs. We present a 3-D forward modeling and inversion study using synthetic data and under realistic conditions, these include the true borehole spacing and the observed electromagnetic noise level in the DUG laboratory. Based on these results we discuss the system requirements and the capability of crosswell EM to recover the inter-well structure and stimulation-induced changes. Besides the numerical study we report on the current status of instrumentation and realization of crosswell EM measurements at the DUG laboratory.

  13. Feasibility study of heavy ion physics program at NICA

    NASA Astrophysics Data System (ADS)

    Batyuk, P. N.; Kekelidze, V. D.; Kolesnikov, V. I.; Rogachevsky, O. V.; Sorin, A. S.; Voronyuk, V. V.

    2016-07-01

    There are strong experimental and theoretical evidences that in collisions of heavy ions at relativistic energies nuclear matter undergoes a phase transition to the deconfined state—Quark Gluon Plasma. The caused energy region of such transition was not found at high energy at SPS and RHIC and search for this energy is shifted to lower energies, which will be covered by the future NICA (Dubna), FAIR (Darmstadt) facilities and BES II at RHIC. Fixed target and collider experiments at the NICA facility will work at the energy range from a few AGeV up to √ {{S_{NN}}} = 11GeV GeV and will study the most interesting area on the nuclear matter phase diagram. The most remarkable results were observed in the study of collective phenomena occurring in the early stage of nuclear collisions. Investigation of the collective flow will provide information on Equation of State (EoS) for nuclear matter. Study of the Event-by-Event fluctuations and correlations can give us signals of critical behavior of the system. Femtoscopy analysis provides the space-time history of the collisions. Also, it was found that baryon stopping power revealing itself as a "wiggle" in excitation function of curvature of the (net)proton rapidity spectrum relates to the order of the phase transition. The available observations of an enhancement of dilepton rates at low invariant masses may serve as a signal of the chiral symmetry restoration in hot and dense matter. Due to this fact, measurements of the dilepton spectra are considered to be an important part of the NICA physics program. The study of strange particles and hypernuclei production gives additional information on the EoS and "strange" axis of the QCD phase diagram. In this paper a feasibility of the considered investigations is shown by the detailed Monte Carlo simulations applied to the planned experiments (BM@N, MPD) at NICA.

  14. Increasing fruits and vegetables in midlife women: a feasibility study.

    PubMed

    Gunn, Caroline A; Weber, Janet L; Coad, Jane; Kruger, Marlena C

    2013-07-01

    The positive link between bone health and fruit/vegetable consumption has been attributed to the lower renal acid load of a diet high in alkaline-forming fruit/vegetables. Other important dietary determinants of bone health include micronutrients and bioactives found in fruit/vegetables. We hypothesized that increased intake of fruit/vegetables to 9 or more servings a day would lower net endogenous acid production (NEAP) significantly (~20 mEq/d) and increase urine pH (0.5 pH units). This 8-week feasibility study investigated if 21 midlife women (age, 40-65 years) currently consuming 5 or less servings a day of fruit/vegetables could increase their intake to 9 or more servings a day to substantially lower NEAP and include specific vegetables daily. Three-day diet diaries were completed at baseline and the end of the study and assessed for NEAP (estimated) and number of servings from all food groups. Urine pH dipsticks were provided for the participants to assess and record their fasting urine pH daily (second void). Seventy-six percent of women achieved the study aim, which was to increase to 9 or more servings of fruit/vegetables for at least 5 d/wk. There was a reduction in the number of bread/cereal servings. Net endogenous acid production (estimated) was reduced significantly, with a mean urine pH increase of 0.68 pH units (95% confidence interval, 0.46-1.14); however, daily urine pH measures showed high variability. This study demonstrated that a group of midlife women can change their diet for 8 weeks by significantly increasing fruit/vegetable servings and include specific "bone friendly" vegetables daily, resulting in a significant decrease in estimated dietary NEAP and an increase in urine pH. PMID:23827128

  15. Moving with music for stroke rehabilitation: a sonification feasibility study.

    PubMed

    Scholz, Daniel S; Rhode, Sönke; Großbach, Michael; Rollnik, Jens; Altenmüller, Eckart

    2015-03-01

    Gross-motor impairments are common after stroke, but efficacious and motivating therapies for these impairments are scarce. We present a novel musical sonification therapy especially designed to retrain gross-motor functions. Four stroke patients were included in a clinical pre-post feasibility study and were trained with our sonification training. Patients' upper-extremity functions and their psychological states were assessed before and after training. The four patients were subdivided into two groups, with both groups receiving 9 days of musical sonification therapy (music group, MG) or a sham sonification training (control group, CG). The only difference between these training protocols was that, in the CG, no sound was played back. During the training the patients initially explored the acoustic effects of their arm movements, and at the end of the training the patients played simple melodies by moving their arms. The two patients in the MG improved in nearly all motor function tests after the training. They also reported in the stroke impact scale, which assesses well-being, memory, thinking, and social participation, to be less impaired by the stroke. The two patients in the CG did benefit less from the movement training. Taken together, musical sonification may be a promising therapy for impairments after stroke. PMID:25773619

  16. Feasibility study of tank leakage mitigation using subsurface barriers

    SciTech Connect

    Treat, R.L.; Peters, B.B.; Cameron, R.J.; McCormak, W.D.; Trenkler, T.; Walters, M.F.; Rouse, J.K.; McLaughlin, T.J.; Cruse, J.M.

    1994-09-21

    The US Department of Energy (DOE) has established the Tank Waste Remediation System (TWRS) to satisfy manage and dispose of the waste currently stored in the underground storage tanks. The retrieval element of TWRS includes a work scope to develop subsurface impermeable barriers beneath SSTs. The barriers could serve as a means to contain leakage that may result from waste retrieval operations and could also support site closure activities by facilitating cleanup. Three types of subsurface barrier systems have emerged for further consideration: (1) chemical grout, (2) freeze walls, and (3) desiccant, represented in this feasibility study as a circulating air barrier. This report contains analyses of the costs and relative risks associated with combinations retrieval technologies and barrier technologies that from 14 alternatives. Eight of the alternatives include the use of subsurface barriers; the remaining six nonbarrier alternative are included in order to compare the costs, relative risks and other values of retrieval with subsurface barriers. Each alternative includes various combinations of technologies that can impact the risks associated with future contamination of the groundwater beneath the Hanford Site to varying degrees. Other potential risks associated with these alternatives, such as those related to accidents and airborne contamination resulting from retrieval and barrier emplacement operations, are not quantitatively evaluated in this report.

  17. Revised CTUIR Renewable Energy Feasibility Study Final Report

    SciTech Connect

    John Cox; Thomas Bailor; Theodore Repasky; Lisa Breckenridge

    2005-10-31

    This preliminary assessment of renewable energy resources on the Umatilla Indian Reservation (UIR) has been performed by CTUIR Department of Science and Engineering (DOSE). This analysis focused primarily identifying renewable resources that may be applied on or near the Umatilla Indian Reservation. In addition preliminary technical and economic feasibility of developing renewable energy resources have been prepared and initial land use planning issues identified. Renewable energies examined in the course of the investigation included solar thermal, solar photovoltaic, wind, bioethanol, bio-diesel and bio-pellet fuel. All renewable energy options studied were found to have some potential for the CTUIR. These renewable energy options are environmentally friendly, sustainable, and compliment many of the policy goals of the CTUIR. This report seeks to provide an overall review of renewable energy technologies and applications. It tries to identify existing projects near to the CTUIR and the efforts of the federal government, state government and the private sector in the renewable energy arena. It seeks to provide an understanding of the CTUIR as an energy entity. This report intends to provide general information to assist tribal leadership in making decisions related to energy, specifically renewable energy deve lopment.

  18. Bilateral simultaneous percutaneous nephrolithotomy. A prospective feasibility study.

    PubMed

    Ahlawat, R; Banerjee, G K; Dalela, D

    1995-01-01

    A prospective study was undertaken to assess the feasibility and safety of bilateral simultaneous percutaneous nephrolithotomy (BPNL) under single anesthesia. BPNL was attempted in 16 consecutive patients with upper tract urolithiasis suitable for percutaneous treatment bilaterally. Bilateral simultaneous PNL could be accomplished in 14 of 16 cases; the opposite side was abandoned in 2 due to technical reasons. The operating sides could be switched within a short period (15 min) by rotating the patient table by 180 degrees. The average total operating time and irrigation time was 83 and 43 min, respectively. A total of 29 tracts and 18 sessions were required for endourologic treatment of 28 units in 14 patients. There was no significant morbidity. Complete clearance was achieved in 11 of 14 patients; there was insignificant residue in 1, while 2 with major residue required adjunct JJ stenting and extra-corporeal shockwave lithotripsy. The average hospital stay was 5.4 days. After initial proficiency with endourology, preparedness for BPNL is advisable in all such cases.

  19. Feasibility study of medical isotope production at Sandia National Laboratories

    SciTech Connect

    Massey, C.D.; Miller, D.L.; Carson, S.D.

    1995-12-01

    In late 1994, Sandia National Laboratories in Albuquerque, New Mexico, (SNL/NM), was instructed by the Department of Energy (DOE) Isotope Production and Distribution Program (IPDP) to examine the feasibility of producing medically useful radioisotopes using the Annular Core Research Reactor (ACRR) and the Hot Cell Facility (HCF). Los Alamos National Laboratory (LANL) would be expected to supply the targets to be irradiated in the ACRR. The intent of DOE would be to provide a capability to satisfy the North American health care system demand for {sup 99}Mo, the parent of {sup 99m}Tc, in the event of an interruption in the current Canadian supply. {sup 99m}Tc is used in 70 to 80% of all nuclear medicine procedures in the US. The goal of the SNL/NM study effort is to determine the physical plant capability, infrastructure, and staffing necessary to meet the North American need for {sup 99}Mo and to identify and examine all issues with potential for environmental impact.

  20. Sitewide feasibility study Eielson Air Force Base, Alaska

    SciTech Connect

    Last, G.V.; Lanigan, D.C.; Josephson, G.B.; Bagaasen, L.M.

    1995-09-01

    The Sitewide Feasibility Study (FS) is required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the National Contingency Plan (NCP), and the Federal Facility Agreement (FFA) for Eielson Air Force Base (AFB). It is based on findings presented in the Sitewide Remedial Investigation (RI) Report (USAF 1995a), and the Sitewide Baseline Risk Assessment (BLRA) Report (USAF 1995b). Under the FFA, 64 potential source areas were placed in one of six operable units, based on similar contaminant and environmental characteristics, or were included for evaluation under a Source Evaluation Report (SER). The sitewide RI was directed at contamination that was not confined to an operable unit (OU) or SER source area. The objectives of the sitewide RI were to: Provide information about site characteristics to support individual OU RI/FS efforts and the sitewide RI/FS, including site hydrogeology and determination of background soil and groundwater characteristics; identify and characterize contamination that is not confined or attributable to a specific source area through sitewide monitoring of groundwater and surface water; evaluate cumulative risks to human health and the environment from contamination on a sitewide basis; and provide a mechanism for continued cohesive sitewide monitoring.

  1. Feasibility study of superconducting LSM rocket launcher system

    NASA Technical Reports Server (NTRS)

    Yoshida, Kinjiro; Ohashi, Takaaki; Shiraishi, Katsuto; Takami, Hiroshi

    1994-01-01

    A feasibility study is presented concerning an application of a superconducting linear synchronous motor (LSM) to a large-scale rocket launcher, whose acceleration guide tube of LSM armature windings is constructed 1,500 meters under the ground. The rocket is released from the linear launcher just after it gets to a peak speed of about 900 kilometers per hour, and it flies out of the guide tube to obtain the speed of 700 kilometers per hour at the height of 100 meters above ground. The linear launcher is brought to a stop at the ground surface for a very short time of 5 seconds by a quick control of deceleration. Very large current variations in the single-layer windings of the LSM armature, which are produced at the higher speed region of 600 to 900 kilometers per hour, are controlled successfully by adopting the double-layer windings. The proposed control method makes the rocket launcher ascend stably in the superconducting LSM system, controlling the Coriolis force.

  2. Flight Performance Feasibility Studies for the Max Launch Abort System

    NASA Technical Reports Server (NTRS)

    Tarabini, Paul V.; Gilbert, Michael G.; Beaty, James R.

    2013-01-01

    In 2007, the NASA Engineering and Safety Center (NESC) initiated the Max Launch Abort System Project to explore crew escape system concepts designed to be fully encapsulated within an aerodynamic fairing and smoothly integrated onto a launch vehicle. One objective of this design was to develop a more compact launch escape vehicle that eliminated the need for an escape tower, as was used in the Mercury and Apollo escape systems and what is planned for the Orion Multi-Purpose Crew Vehicle (MPCV). The benefits for the launch vehicle of eliminating a tower from the escape vehicle design include lower structural weights, reduced bending moments during atmospheric flight, and a decrease in induced aero-acoustic loads. This paper discusses the development of encapsulated, towerless launch escape vehicle concepts, especially as it pertains to the flight performance and systems analysis trade studies conducted to establish mission feasibility and assess system-level performance. Two different towerless escape vehicle designs are discussed in depth: one with allpropulsive control using liquid attitude control thrusters, and a second employing deployable aft swept grid fins to provide passive stability during coast. Simulation results are presented for a range of nominal and off-nominal escape conditions.

  3. Energy Modulated Photon Radiotherapy: A Monte Carlo Feasibility Study

    PubMed Central

    Zhang, Ying; Feng, Yuanming; Ming, Xin

    2016-01-01

    A novel treatment modality termed energy modulated photon radiotherapy (EMXRT) was investigated. The first step of EMXRT was to determine beam energy for each gantry angle/anatomy configuration from a pool of photon energy beams (2 to 10 MV) with a newly developed energy selector. An inverse planning system using gradient search algorithm was then employed to optimize photon beam intensity of various beam energies based on presimulated Monte Carlo pencil beam dose distributions in patient anatomy. Finally, 3D dose distributions in six patients of different tumor sites were simulated with Monte Carlo method and compared between EMXRT plans and clinical IMRT plans. Compared to current IMRT technique, the proposed EMXRT method could offer a better paradigm for the radiotherapy of lung cancers and pediatric brain tumors in terms of normal tissue sparing and integral dose. For prostate, head and neck, spine, and thyroid lesions, the EMXRT plans were generally comparable to the IMRT plans. Our feasibility study indicated that lower energy (<6 MV) photon beams could be considered in modern radiotherapy treatment planning to achieve a more personalized care for individual patient with dosimetric gains. PMID:26977413

  4. The moving thermoacoustic array: A theoretical feasibility study

    NASA Astrophysics Data System (ADS)

    Chotiros, N. P.

    1985-01-01

    A theoretical study of the feasibility of the moving thermoacoustic source as a sound projector in underwater acoustic applications is presented. Since the Doppler shift is direction dependent, it was found that the moving optoacoustic sources are potentially useful for direction finding by virtue of the extremely high Doppler shifts achievable. While the thermoacoustic array has certain advantages over conventional acoustic projectors, notably the noncontact property and the Doppler direction finding capability, its optoacoustic energy conversion efficiency is no better than that of the stationary thermoacoustic array. This conclusion was arrived at through mathematical analysis from basic principles, and supported by computer generated numerical examples. The conversion efficiency was found to be strongly dependent on the acoustic signal carrier frequency and on the optical signal waveform. It was found that the thermoacoustic conversion was most efficient when the optical energy was delivered as an impulse train. The efficiency is fundamentally limited by the physical properties of the medium, particularly the coefficient of thermal expansion and the specific heat. A different optoacoustic conversion process, which employs nonlinear physical reactions to generate sound, is being pursued.

  5. Majorana One-Tonne Cryostat Cooling Conceptual Feasibility Study

    SciTech Connect

    Reid, Douglas J.; Orrell, John L.; Fast, James E.; Aguayo Navarrete, Estanislao

    2011-02-17

    This report evaluates the conceptual plans for a one-tonne (S4) cryostat cooling design. This document is based upon previous design work and experimental results used to evaluate the current MAJORANA DEMONSTRATOR (MJD) thermal design. A feasibility study of a cooling system for S4 based on the MJD thermosyphon experiment is presented. The one-tonne experiment will be a scaled up version of the MJD. There will be many cryostats for the S4 experiment. In this document a cryostat with up to 19 strings of Germanium crystals is analyzed. Aside from an extra outer ring of crystals, the geometry of both systems’ cryostats is very similar. The materials used in the fabrication of both ultra-low background experiments will be underground electroformed copper. The current MJD uses a two-phase liquid-gas cooling system to ensure constant operating temperature. This document presents a theoretical investigation of a cooling system for the S4 experiment and evaluates the heat transfer performance requirements for such a system.

  6. Feasibility Study For A Spaceborne Ozone/Aerosol Lidar System

    NASA Technical Reports Server (NTRS)

    Campbell, Richard E.; Browell, Edward V.; Ismail, Syed; Dudelzak, Alexander E.; Carswell, Allan I.; Ulitsky, Arkady

    1997-01-01

    Because ozone provides a shield against harmful ultraviolet radiation, determines the temperature profile in the stratosphere, plays important roles in tropospheric chemistry and climate, and is a health risk near the surface, changes in natural ozone layers at different altitudes and their global impact are being intensively researched. Global ozone coverage is currently provided by passive optical and microwave satellite sensors that cannot deliver high spatial resolution measurements and have particular limitations in the troposphere. Vertical profiling DIfferential Absorption Lidars (DIAL) have shown excellent range-resolved capabilities, but these systems have been large, inefficient, and have required continuous technical attention for long term operations. Recently, successful, autonomous DIAL measurements have been performed from a high-altitude aircraft (LASE - Lidar Atmospheric Sensing Experiment), and a space-qualified aerosol lidar system (LITE - Laser In-space Technology Experiment) has performed well on Shuttle. Based on the above successes, NASA and the Canadian Space Agency are jointly studying the feasibility of developing ORACLE (Ozone Research with Advanced Cooperative Lidar Experiments), an autonomously operated, compact DIAL instrument to be placed in orbit using a Pegasus class launch vehicle.

  7. Feasibility study of laminar flow bodies in fully turbulent flow

    SciTech Connect

    Sarkar, T.; Sayer, P.G.; Fraser, S.M.

    1994-12-31

    One of the most important design requirements of long range autonomous underwater vehicles (AUVs) is to minimize propulsive power. An important and relatively easy way of achieving this is by careful selection of hull shape. Two main schools of thought in this respect are: if laminar flow can be maintained for a long length of the body, the effective drag can be reduced; it is not possible to maintain laminar flow for a significant length of the body and hull design should be based on turbulent flow conditions. In this paper, a feasibility study of laminar flow designs is undertaken under the assumption that flow will be turbulent over the entire length. For comparison two laminar flow designs X-35 and F-57 are selected and results are compared with those of two typical torpedo shaped bodies, namely AFTERBODY1 and AFTERBODY2 of DTNSRDC. It has been shown that laminar flow bodies have 10--15% higher drag when flow is turbulent over the entire length. Hence there is some hydrodynamic risk involved in adopting such laminar bodies without further consideration.

  8. Quantitative analysis of multiple sclerosis: a feasibility study

    NASA Astrophysics Data System (ADS)

    Li, Lihong; Li, Xiang; Wei, Xinzhou; Sturm, Deborah; Lu, Hongbing; Liang, Zhengrong

    2006-03-01

    Multiple Sclerosis (MS) is an inflammatory and demyelinating disorder of the central nervous system with a presumed immune-mediated etiology. For treatment of MS, the measurements of white matter (WM), gray matter (GM), and cerebral spinal fluid (CSF) are often used in conjunction with clinical evaluation to provide a more objective measure of MS burden. In this paper, we apply a new unifying automatic mixture-based algorithm for segmentation of brain tissues to quantitatively analyze MS. The method takes into account the following effects that commonly appear in MR imaging: 1) The MR data is modeled as a stochastic process with an inherent inhomogeneity effect of smoothly varying intensity; 2) A new partial volume (PV) model is built in establishing the maximum a posterior (MAP) segmentation scheme; 3) Noise artifacts are minimized by a priori Markov random field (MRF) penalty indicating neighborhood correlation from tissue mixture. The volumes of brain tissues (WM, GM) and CSF are extracted from the mixture-based segmentation. Experimental results of feasibility studies on quantitative analysis of MS are presented.

  9. Space-based laser-driven MHD generator: Feasibility study

    NASA Technical Reports Server (NTRS)

    Choi, S. H.

    1986-01-01

    The feasibility of a laser-driven MHD generator, as a candidate receiver for a space-based laser power transmission system, was investigated. On the basis of reasonable parameters obtained in the literature, a model of the laser-driven MHD generator was developed with the assumptions of a steady, turbulent, two-dimensional flow. These assumptions were based on the continuous and steady generation of plasmas by the exposure of the continuous wave laser beam thus inducing a steady back pressure that enables the medium to flow steadily. The model considered here took the turbulent nature of plasmas into account in the two-dimensional geometry of the generator. For these conditions with the plasma parameters defining the thermal conductivity, viscosity, electrical conductivity for the plasma flow, a generator efficiency of 53.3% was calculated. If turbulent effects and nonequilibrium ionization are taken into account, the efficiency is 43.2%. The study shows that the laser-driven MHD system has potential as a laser power receiver for space applications because of its high energy conversion efficiency, high energy density and relatively simple mechanism as compared to other energy conversion cycles.

  10. Fort Yukon, Chalkyitsik, & Venetie Biomass Boiler Feasibility Study

    SciTech Connect

    Greg Koontz, ME William A. Wall, PhD

    2009-03-31

    The Council of Athabascan Tribal Governments (CATG) is a consortium of ten Gwich'in and Koyukon Athabascan tribes settled in 10 remote villages and are linked by the Yukon River System. The CATG mission is to maintain the Yukon Flats region as Indian Country by asserting traditional rights and taking responsibility for developing tribal technical capacity to manage the land and resources. It is the intent of CATG to explore and develop all opportunities for a renewable and self-sufficient energy program for each of the villages. CATG envisions utilization of forest resources both for construction and energy as one of the best long-term strategies for integrating the economic goals for the region as well as supporting the cultural and social issues. The intent for this feasibility project is to focus specifically on biomass utilization for heat, first, and for future electrical generation within the region, second. An initial determination has already been made regarding the importance of wood energy as a primary source of renewable energy to displace diesel fuel in the Yukon Flats region. A desktop study of other potential renewable resources was conducted in 2006.

  11. Moving with music for stroke rehabilitation: a sonification feasibility study.

    PubMed

    Scholz, Daniel S; Rhode, Sönke; Großbach, Michael; Rollnik, Jens; Altenmüller, Eckart

    2015-03-01

    Gross-motor impairments are common after stroke, but efficacious and motivating therapies for these impairments are scarce. We present a novel musical sonification therapy especially designed to retrain gross-motor functions. Four stroke patients were included in a clinical pre-post feasibility study and were trained with our sonification training. Patients' upper-extremity functions and their psychological states were assessed before and after training. The four patients were subdivided into two groups, with both groups receiving 9 days of musical sonification therapy (music group, MG) or a sham sonification training (control group, CG). The only difference between these training protocols was that, in the CG, no sound was played back. During the training the patients initially explored the acoustic effects of their arm movements, and at the end of the training the patients played simple melodies by moving their arms. The two patients in the MG improved in nearly all motor function tests after the training. They also reported in the stroke impact scale, which assesses well-being, memory, thinking, and social participation, to be less impaired by the stroke. The two patients in the CG did benefit less from the movement training. Taken together, musical sonification may be a promising therapy for impairments after stroke.

  12. Stroke Experiences in Weblogs: A Feasibility Study of Sex Differences

    PubMed Central

    Koh, Sukjin; Gordon, Andrew S; Wienberg, Christopher; Sood, Sara O; Morley, Stephanie

    2014-01-01

    Background Research on cerebral stroke symptoms using hospital records has reported that women experience more nontraditional symptoms of stroke (eg, mental status change, pain) than men do. This is an important issue because nontraditional symptoms may delay the decision to get medical assistance and increase the difficulty of correct diagnosis. In the present study, we investigate sex differences in the stroke experience as described in stories on weblogs. Objective The goal of this study was to investigate the feasibility of using the Internet as a source of data for basic research on stroke experiences. Methods Stroke experiences described in blogs were identified by using StoryUpgrade, a program that searches blog posts using a fictional prototype story. In this study, the prototype story was a description of a stroke experience. Retrieved stories coded by the researchers as relevant were used to update the search query and retrieve more stories using relevance feedback. Stories were coded for first- or third-person narrator, traditional and nontraditional patient symptoms, type of stroke, patient sex and age, delay before seeking medical assistance, and delay at hospital and in treatment. Results There were 191 relevant stroke stories of which 174 stories reported symptoms (52.3% female and 47.7% male patients). There were no sex differences for each traditional or nontraditional stroke symptom by chi-square analysis (all Ps>.05). Type of narrator, however, affected report of traditional and nontraditional symptoms. Female first-person narrators (ie, the patient) were more likely to report mental status change (56.3%, 27/48) than male first-person narrators (36.4%, 16/44), a marginally significant effect by logistic regression (P=.056), whereas reports of third-person narrators did not differ for women (27.9%, 12/43) and men (28.2%, 11/39) patients. There were more reports of at least 1 nontraditional symptom in the 92 first-person reports (44.6%, 41/92) than

  13. Feasibility studies for the follow-on EUMETSAT polar system

    NASA Astrophysics Data System (ADS)

    Banfi, S.; Schlüssel, P.; Diebel, D.; Clarke, P.; Betto, M.; Lin, Chung-Chi; Kangas, V.; Kraft, S.; Bensi, P.; Zerfowski, I.; Saccoccio, M.; Maciaszek, T.

    2010-10-01

    replace the current satellite system in the 2020 timeframe and contribute to the Joint Polar System to be set up with NOAA. Through consultation with users and application experts, requirements have been defined for a range of candidate missions mainly in support of operational meteorology and climate monitoring. A number of on-board instruments, satellite platforms and ground support infrastructure are under study in coordination with ESA, NOAA, DLR and CNES. The satellites will fly in a sun synchronous, low earth orbit at 817 km altitude and 09:30 descending equatorial crossing time, providing observations with global coverage every 12 to 24 hours depending on instrument. The instruments exploit a range of techniques including multi spectral imaging, atmospheric sounding in the optical and microwave spectral domains, radio occultation sounding, scatterometry and microwave imaging. The raw instrument data will be broadcast directly by the satellites, as well as being stored on board for their transmission, in sets spanning up to a full orbit, to polar ground stations. These data will be collected at EUMETSAT facilities and processed to obtain calibrated and geo-located measurements, and records of well defined geophysical variables. The data will be distributed to the users in near real time and archived together with the data of other EUMETSAT satellite systems, making available long term records also suitable for climate monitoring. Feasibility studies for the space and ground systems will be done until early 2012 with the main objective to select the baseline configuration for preliminary definition, development and operation programmes to be proposed and coordinated within the involved organisations.

  14. Feasibility study for a future Austrian lightning nano-satellite

    NASA Astrophysics Data System (ADS)

    Schwingenschuh, Konrad; Jaffer, Ghulam; Koudelka, O.; Khan, S.; Grant, C.; Unterberger, M.; Lichtenegger, Herbert; Macher, W.; Hausleitner, W.

    A feasibility study for an Austrian lightning nano-satellite is presented. The satellite will carry a radio-frequency receiver payload for the investigation of electromagnetic signatures produced by lightning strokes. A special emphasis will be on the investigation of transient electromagnetic waves in VHF range (20-40MHz) known as sferics. The onboard RF lightning triggering system will be a special capability of the nano-satellite. The lightning experiment will also observe VHF signals of ionospheric and magnetospheric origin. Adaptive filters will be developed to differentiate terrestrial electromagnetic impulsive signals from ionospheric or magnetospheric signals. One of the major problems using a nano-satellite is to integrate the lightning experiment antenna, receiver and data acquisition unit into the nano-satellite structure. Using a gravity gradient boom as a lightning antenna can increase the sensitivity and directional capability. A major part of this study is devoted to the design of a combined gravity-gradient boom and a sferics antenna. The compact structure of a nano-satellite faces special EMC issues e.g., impulsive electromagnetic events from DC converters. The low power and mass budget of a nano-satellite requires merging of the satellite housekeeping and lightning experiment units. The Lightning nano-satellite team has participated in various space missions (HUYGENS, DEMETER, PHOBOS, CLUSTER) investigating electromagnetic phenomena. The data of these missions will be used to test the hardand software of the lightning experiment before the launch. Further tests with a satellite mock-up, high frequency electronics and gravity gradient boom acting as lightning antenna will be carried out in a high voltage chamber, where artificial lightning can be generated. Additionally ground based and balloon-borne tests are planned with the satellite engineering model using terrestrial lightning.

  15. Feasibility of the Dutch ICF Activity Inventory: a pilot study

    PubMed Central

    2010-01-01

    Background Demographic ageing will lead to increasing pressure on visual rehabilitation services, which need to be efficiently organised in the near future. The Dutch ICF Activity Inventory (D-AI) was developed to assess the rehabilitation needs of visually impaired persons. This pilot study tests the feasibility of the D-AI using a computer-assisted telephone interview. Methods In addition to the regular intake, the first version of the D-AI was assessed in 20 patients. Subsequently, patients and intake assessors were asked to fill in an evaluation form. Based on these evaluations, a new version of the D-AI was developed. Results Mean administration time of the D-AI was 88.8 (± 41.0) minutes. Overall, patients and assessors were positive about the D-AI assessment. However, professionals and 60% of the patients found the administration time to be too long. All included items were considered relevant and only minor adjustments were recommended. Conclusion The systematic character of the revised D-AI will prevent topics from being overlooked and indicate which needs have the highest priority from a patient-centred perspective. Moreover, ongoing assessment of the D-AI will enhance evaluation of the rehabilitation process. To decrease administration time, in the revised D-AI only the top priority goals will be fully assessed. Using the D-AI, a rehabilitation plan based on individual needs can be developed for each patient. Moreover, it enables better evaluation of the effects of rehabilitation. A larger validation study is planned. PMID:21110871

  16. Feasibility study of a 1-MW pulsed spallation source

    SciTech Connect

    Cho, Y.; Chae, Y.C.; Crosbie, E.

    1995-12-31

    A feasibility study of a 1-MW pulsed spallation source based on a rapidly cycling proton synchrotron (RCS) has been completed. The facility consists of a 400-MeV HP{sup -} linac, a 30-Hz RCS that accelerates the 400-MeV beam to 2 GeV, and two neutron-generating target stations. The design time-averaged current of the accelerator system is 0.5 mA, or 1.04{times}1014 protons per pulse. The linac system consists of an H{sup -}ion source, a 2-MeV RFQ, a 70-MeV DTL and a 330-MeV CCL. Transverse phase space painting to achieve a Kapchinskij-Vladimirskij (K-V) distribution of the injected particles in the RCS is accomplished by charge exchange injection and programming of the closed orbit during injection. The synchrotron lattice uses FODO cells of {approx}90{degrees} phase advance. Dispersion-free straight sections are obtained by using a missing magnet scheme. Synchrotron magnets are powered by a dual-frequency resonant circuit that excites the magnets at a 20-Hz rate and de-excites them at a 60-Hz rate, resulting in an effective rate of 30 Hz, and reducing the required peak rf voltage by 1/3. A key feature, of the design of this accelerator system is that beam losses are from injection to extraction, reducing activation to levels consistent with hands-on maintenance. Details of the study are presented.

  17. Comprehensive Renewable Energy Feasibility Study for Sealaska Corporation

    SciTech Connect

    Robert Lynette; John Wade: Larry Coupe

    2006-06-30

    The purposes of this project were: (1) to conduct a comprehensive feasibility study to determine the potential sustainability of wind and/or small hydroelectric power plants on Southeast Alaska native village lands, and (2) to provide the villages with an understanding of the requirements, costs, and benefits of developing and operating wind or small hydroelectric power plants. The program was sponsored by the Tribal Energy program, Office of Energy Efficiency and Renewable Energy, US Department of Energy. The Contractor was Sealaska Corporation, the Regional Native Corporation for Southeast Alaska that includes 12 village/urban corporations. Most villages are isolated from any central electric transmission and use diesel-electric systems for power generation, making them prime candidates for deploying renewable energy sources. Wind Energy - A database was assembled for all of the candidate sites in SE Alaska, including location, demographics, electricity supply and demand, existing and planned transmission interties with central generation, topographical maps, macro wind data, and contact personnel. Field trips were conducted at the five candidate villages that were deemed most likely to have viable wind resources. Meetings were held with local village and utility leaders and the requirements, costs, and benefits of having local renewable energy facilities were discussed. Two sites were selected for anemometry based on their needs and the probability of having viable wind resources – Yakutat and Hoonah. Anemometry was installed at both sites and at least one year of wind resource data was collected from the sites. This data was compared to long-term data from the closest weather stations. Reports were prepared by meteorologist John Wade that contains the details of the measured wind resources and energy production projections. Preliminary financial analysis of hypothetical wind power stations were prepared to gauge the economic viability of installing such

  18. Pueblo of Jemez Geothermal Feasibility Study Fianl Report

    SciTech Connect

    S.A. Kelley; N. Rogers; S. Sandberg; J. Witcher; J. Whittier

    2005-03-31

    This project assessed the feasibility of developing geothermal energy on the Pueblo of Jemez, with particular attention to the Red Rocks area. Geologic mapping of the Red Rocks area was done at a scale of 1:6000 and geophysical surveys identified a potential drilling target at a depth of 420 feet. The most feasible business identified to use geothermal energy on the reservation was a greenhouse growing culinary and medicinal herbs. Space heating and a spa were identified as two other likely uses of geothermal energy at Jemez Pueblo. Further geophysical surveys are needed to identify the depth to the Madera Limestone, the most likely host for a major geothermal reservoir.

  19. Feasibility Study for Renewable Energy Development on Tribal Lands

    SciTech Connect

    John Hendrix, Project Director; Charles Weir, Project Manager; Dr. John Plodinec, Technology Advisor; Dr. Steve Murray, Economic Advisor

    2005-07-21

    Project Objective: The Mississippi Band of Choctaw Indians (MBCI) conducted a study of the feasibility of siting a renewable energy biomass-based installation on tribal lands. The purpose of the study was to determine whether such an installation can be economically sustainable, as well as consistent with the cultural, social, and economic goals of the Tribe. Scope: To achieve the goal of the feasibility study, the following tasks were carried out: (1) Resource availability assessment--The objective of this assessment was to determine the availability of both poultry litter and wood residues for use in the proposed facility. (2) Power utilization assessment--The objective of this assessment was to determine the potential market size for power produced, the existing infrastructure for delivering power to that market, and the costs and economic returns for doing so. (3) Technology review--The objective of this review was to identify one, or more, technical options for detailed economic and technical assessment. The study considered a range of feedstock and product mixtures of poultry litter; wood residues as feedstock; and electrical power and other ancillary products as outputs. Distributed power sources was also examined. Technologies ranging from gasification to systems that produce both power and value-added chemicals were considered. Technologies selected for detailed review were those that can be sized to process the amount of available feed (poultry litter, or poultry litter and wood residues), and that also appear to make economic sense in terms of the value of their inputs. The technology review leaned heavily on the experience from similar prior DOE projects, particularly those conducted by the National Renewable Energy Laboratory (NREL). NREL was involved in a consultative role, so that the project team could leverage their experience. (4) Systems Design(s)--Based on the technology review, a pre-conceptual design for an installation was developed. This

  20. Time Reversal Signal Processing in Communications - A Feasibility Study

    SciTech Connect

    Meyer, A W; Candy, J V; Poggio, A J

    2002-01-30

    A typical communications channel is subjected to a variety of signal distortions, including multipath, that corrupt the information being transmitted and reduce the effective channel capacity. The mitigation of the multipath interference component is an ongoing concern for communication systems operating in complex environments such as might be experienced inside buildings, urban environments, and hilly or heavily wooded areas. Communications between mobile units and distributed sensors, so important to national security, are dependent upon flawless conveyance of information in complex environments. The reduction of this multipath corruption necessitates better channel equalization, i.e., the removal of channel distortion to extract the transmitted information. But, the current state of the art in channel equalization either requires a priori knowledge of the channel or the use of a known training sequence and adaptive filtering. If the ''assumed'' model within the equalization processor does not at least capture the dominant characteristics of the channel, then the received information may still be highly distorted and possibly useless. Also, the processing required for classical equalization is demanding in computational resources. To remedy this situation, many techniques have been investigated to replace classical equalization. Such a technique, the subject of this feasibility study, is Time Reversal Signal Processing (TRSP). Multipath is particularly insidious and a major factor in the deterioration of communication channels. Unlike most other characteristics that corrupt a communications channel, the detrimental effects of multipath cannot be overcome by merely increasing the transmitted power. Although the power in a signal diminishes as a function of the distance between the transmitter and receiver, multipath further degrades a signal by creating destructive interference that results in a loss of received power in a very localized area, a loss often

  1. Cryotherapy for Breast Cancer: A Feasibility Study without Excision

    PubMed Central

    Littrup, Peter J.; Jallad, Bassel; Chandiwala-Mody, Priti; D’Agostini, Monica; Adam, Barbara A.; Bouwman, David

    2013-01-01

    PURPOSE To assess the feasibility of percutaneous multiprobe breast cryoablation (BC) for diverse presentations of cancers that remained in situ after BC. MATERIALS AND METHODS After breast magnetic resonance (MR) imaging and thorough consultation, patients underwent BC after giving informed consent. This study was approved by the institutional review board. In 12 BC sessions, 22 breast cancer foci (stages I–IV) were treated in 11 patients who refused surgery by using multiple 2.4-mm cryoprobes. Five patients had recurrent disease and six had new diagnoses. With use of only local anesthesia, six patients were treated with ultrasonographic (US) guidance and five were treated with both computed tomographic (CT) and US guidance. Saline injections and warming bags were used to protect the skin. Procedure success was defined as 1 cm visible ice beyond all tumor margins. MR imaging and/or clinical follow-up were available for up to 72 months after BC. RESULTS US produced sufficient ice visualization for small tumors, whereas CT helped confirm overall ice extent. The mean pretreatment breast tumor diameter was 1.7 cm ± 1.2 (range, 0.5–5.8 cm), and an average of 3.1 cryoprobes produced 100% procedural success with mean ice diameters of 5.1 cm ± 2.2 (range, 2.0–10.0 cm). No significant complications, retraction, or scarring were noted. Biopsies at the margins of the cryoablation site immediately after BC and at follow-up were all negative. No local recurrences have been noted at an average imaging follow-up of 18 months. CONCLUSIONS In conjunction with thorough pre- and postablation MR imaging, CT/US-guided multiprobe BC safely achieved 1 cm visible ice beyond tumor margins with minimal discomfort, good cosmesis, and no short-term local tumor recurrences. PMID:19800542

  2. CVD diamond Brewster window: feasibility study by FEM analyses

    NASA Astrophysics Data System (ADS)

    Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.

    2012-09-01

    Chemical vapor deposition (CVD) diamond windows are a crucial component in heating and current drive (H&CD) applications. In order to minimize the amount of reflected power from the diamond disc, its thickness must match the desired beam wavelength, thus proper targeting of the plasma requires movable beam reflectors. This is the case, for instance, of the ITER electron cyclotron H&CD system. However, looking at DEMO, the higher heat loads and neutron fluxes could make the use of movable parts close to the plasma difficult. The issue might be solved by using gyrotrons able to tune the beam frequency to the desired resonance, but this concept requires transmission windows that work in a given frequency range, such as the Brewster window. It consists of a CVD diamond disc brazed to two copper cuffs at the Brewster angle. The brazing process is carried out at about 800°C and then the temperature is decreased down to room temperature. Diamond and copper have very different thermal expansion coefficients, therefore high stresses build up during the cool down phase that might lead to failure of the disc. Considering also the complex geometry of the window with the skewed position of the disc, analyses are required in the first place to check its feasibility. The cool down phase was simulated by FEM structural analyses for several geometric and constraint configurations of the window. A study of indirect cooling of the window by water was also performed considering a HE11 mode beam. The results are here reported.

  3. A feasibility study on precipitation regime classification by meteorological states

    NASA Astrophysics Data System (ADS)

    Hamada, A.; Takayabu, Y. N.

    2012-04-01

    Appropriate microphysical models of rainfall systems are essential for accurate precipitation retrievals from satellite measurements. For a better estimate of rainfall from the microwave imager satellites in Global Satellite Mapping of Precipitation (GSMaP), Takayabu (2008, GEWEX Newsletter; hereinafter T08) produced 3-monthly maps of dominant rainfall systems, utilizing TRMM Precipitation Radar (PR) and Lightning Imaging Sensor (LIS) data. It is worthwhile if we can classify different type of rainfall systems not from satellite rainfall data themselves but from the environmental meteorological states. In this feasibility study, precipitation regime classification over the oceans is performed by constructing a look-up-table (LUT) for estimating precipitation types in terms of local state of the atmosphere and ocean. This time, we chose four variables to construct the LUTs; sea surface temperature (SST), pressure vertical velocity at 500hPa (ω500), lower-tropospheric baroclinicity at 900hPa (dT900/dy), and lower-tropospheric stability (LTS), obtained from ERA-interim and OISST. The LUTs are trained with the precipitation types defined by T08. The four-dimensional probability density functions for each precipitation types were utilized to reconstruct precipitation types at each point. The constructed four-dimensional LUT is shown to have a reasonably good skill in estimation over the oceans. The possibility of detection (POD) is above 60% up to 90% for all seasons. The estimation skill is less dependent on months despite that the LUT was trained with only one month climatology, indicating the choice of these state variables is reasonable. The LUT can also describe interannual variations of precipitation regimes, e.g., those differences in El Niño and La Niña periods. The way of separation by selected environmental states is mostly meteorologically reasonable, although some representative variables have some room for improvements especially in the midlatitudes. We

  4. Quantitative error analysis for computer assisted navigation: a feasibility study

    PubMed Central

    Güler, Ö.; Perwög, M.; Kral, F.; Schwarm, F.; Bárdosi, Z. R.; Göbel, G.; Freysinger, W.

    2013-01-01

    Purpose The benefit of computer-assisted navigation depends on the registration process, at which patient features are correlated to some preoperative imagery. The operator-induced uncertainty in localizing patient features – the User Localization Error (ULE) - is unknown and most likely dominating the application accuracy. This initial feasibility study aims at providing first data for ULE with a research navigation system. Methods Active optical navigation was done in CT-images of a plastic skull, an anatomic specimen (both with implanted fiducials) and a volunteer with anatomical landmarks exclusively. Each object was registered ten times with 3, 5, 7, and 9 registration points. Measurements were taken at 10 (anatomic specimen and volunteer) and 11 targets (plastic skull). The active NDI Polaris system was used under ideal working conditions (tracking accuracy 0.23 mm root mean square, RMS; probe tip calibration was 0.18 mm RMS. Variances of tracking along the principal directions were measured as 0.18 mm2, 0.32 mm2, and 0.42 mm2. ULE was calculated from predicted application accuracy with isotropic and anisotropic models and from experimental variances, respectively. Results The ULE was determined from the variances as 0.45 mm (plastic skull), 0.60 mm (anatomic specimen), and 4.96 mm (volunteer). The predicted application accuracy did not yield consistent values for the ULE. Conclusions Quantitative data of application accuracy could be tested against prediction models with iso- and anisotropic noise models and revealed some discrepancies. This could potentially be due to the facts that navigation and one prediction model wrongly assume isotropic noise (tracking is anisotropic), while the anisotropic noise prediction model assumes an anisotropic registration strategy (registration is isotropic in typical navigation systems). The ULE data are presumably the first quantitative values for the precision of localizing anatomical landmarks and implanted fiducials

  5. Gasoline from coal in the State of Illinois: feasibility study

    SciTech Connect

    Not Available

    1981-01-01

    A detailed study was made of the feasibility of producing approximately 12,000 barrels per day of gasoline from high sulfur Illinois coal. The project was to be based on indirect liquefaction of coal by producing methanol and converting the methanol to raw gasoline. The plant design was based on proven processes: including atmospheric Koppers-Totzek type coal gasification, Rectisol gas purification, Claus and Scot sulfur recovery, and ICI low pressure methanol synthesis, all of which have been used in large commercial plants; and the fixed bed Mobil MTG process, which has been demonstrated in a four barrel per day pilot plant, to convert methanol into gasoline. The plant was designed to meet all federal and state regulations pertaining to environmental protection. The plant would cost approximately $1.27 billion (1981 dollars). Annual operating costs would total $243 million (1981 dollars). It has been determined that the project would not be viable in the present economic environment. Using 1981 dollars, and recognizing the present average refinery selling price in the mid-West of gasoline produced from crude oil is about $42 per barrel, the following gasoline prices have been calculated. For example, if the project were financed entirely by equity funds, then the selling price of gasoline would have to be $122 per barrel in a moderately inflating general economy in order to obtain a rate of return of 10% on the investment. The selling price would be lowered to $106 per barrel if no inflation is assumed. If 75% of the project were financed by debt at 16% interest, and the real price of coal and gasoline increased by 3% more than the general inflation rate, the selling price in 1981 dollars would be $76 per barrel in a moderately inflating economy. As the real price of gasoline increases in the future, this project and the related economics should be reviewed.

  6. Feasibility study for production of anhydrous alcohol from corn

    SciTech Connect

    Not Available

    1980-12-01

    The feasibility of establishing a facility to produce fuel grade alcohol from corn to be located within an existing soybean processing plant in Mexico, Missouri has been studied. The alcohol producing industries, technical literature, various available process technologies, and industry consultants were surveyed. A process consisting of dry milling corn, continuous cooking, batch fermentation and azeotropic distillation was selected as the most suitable technique for the MFA's venture. It was determined that a production rate of 6288 bushels of corn per day yielding 5,200,000 gallons per year of fuel grade ethanol plus the capability to up grade an additional 500,000 gallons per year of low grade alcohol from off-site production facilities was the best design for the space and facilities available within the existing Mexico, Missouri soybean plant while economically utilizing existing buildings and plant area to the best advantage. A factored estimate of expected capital costs for the gasohol demonstration plant was made based on surveys of the plant site and furnished plant drawings, approximate prices for major items of process equipment and estimated construction and erection costs. This cost, with a plus or minus 20% accuracy, was determined to be $8,852,000.00. Revenues were estimated based on the selling price of 200 proof fuel grade alcohol and distillers dried grains with solubles (DDGS). A number of cases were reviewed to demonstrate the sensitivity of plant operating income to various prices for corn, alcohol and DDGS and to assess the effect of inflation over the useful life of the plant. Based on the estimated plant cost and the various cases of operating income, an economic analysis was performed employing a profitability index criterion of discounted cash flow to determine an interest rate of return on the plant investment.

  7. Feasibility Study in an in vivo Porcine Model

    PubMed Central

    Vlaisavljevich, Eli; Kim, Yohan; Allen, Steven; Owens, Gabe; Pelletier, Shawn; Cain, Charles; Ives, Kimberly; Xu, Zhen

    2013-01-01

    Hepatocellular carcinoma (HCC) or liver cancer is one of the fastest growing cancers in the United States. Current liver ablation methods are thermal-based and share limitations due to the heat sink effect from the blood flow through the highly vascular liver. In this study, we demonstrate the feasibility of using histotripsy for non-invasive liver ablation in the treatment of liver cancer. Histotripsy is a non-thermal ablation method that fractionates soft tissue through the control of acoustic cavitation. Twelve histotripsy lesions ~1cm3 were created in the livers of six pigs through an intact abdomen and chest in vivo. Histotripsy pulses of 10 cycles, 500 Hz pulse repetition frequency (PRF), and 14-17 MPa estimated in situ peak negative pressure were applied to the liver using a 1 MHz therapy transducer. Treatments were performed through 4-6 cm of overlying tissue with 30-50% of the ultrasound pathway covered by the ribcage. Complete fractionation of liver parenchyma was observed with sharp boundaries after 16.7 minute treatments. In addition, two larger volumes of 18 cm3 and 60 cm3 were generated within 60 minutes in two additional pigs. As major vessels and gallbladder have higher mechanical strength and are more resistant to histotripsy, the major hepatic vessels and gallbladder remained intact while the liver surrounding these structures was completely fractionated. This work demonstrates that histotripsy is capable of non-invasively fractionating liver tissue while preserving critical anatomical structures within the liver. Results suggest histotripsy has potential for the non-invasive ablation of liver tumors. PMID:23683406

  8. Feasibility study report for the 200-BP-1 operable unit

    SciTech Connect

    Not Available

    1993-06-01

    This feasibility study examines a range of alternatives and provides recommendations for selecting a preferred alternative for remediating contamination at the 200-BP-1 operable unit. The 200-BP-1 operable unit is located in the center of the Hanford Site along the northern boundary of the 200 East Area. The 241-BY Tank Farm is located immediately to the south of the operable unit. 200-BP-1 is a source operable unit with contaminated soils associated primarily with nine inactive cribs (known as the 216-B cribs). These cribs were used for disposal of low-level radioactive liquid waste from U Plant uranium recovery operations, and waste storage tank condensate from the adjacent 241-BY Tank Farm. The cribs used for disposal of U Plant waste were in operation from 1955--1965, and the cribs used for disposal of tank condensate were in operation from 1965--1975. In addition to the cribs, four unplanned releases of radioactive materials have occurred within the operable unit. Contaminated surface soils associated with the unplanned releases have been consolidated over the cribs and covered with clean soil to reduce contaminant migration and exposure. Discharge of wastes to the cribs has resulted in soil and groundwater contamination. The groundwater is being addressed as part of the 200 East Aggregate Area, groundwater operable unit. Contaminated soils at the site can be categorized by the types of contaminants, their distribution in the soil column, and the risk posed by the various potential exposure pathways. Below the clean soil cover, the near surface soils contain low-levels of contamination with cesium-137, radium-226, strontium-90, thorium-228, and uranium. The lifetime incremental cancer risk associated with these soils if they were exposed at the surface is 9{times}10{sup {minus}5}.

  9. Feasibility study: Atmospheric general circulation experiment, volume 2

    NASA Technical Reports Server (NTRS)

    Homsey, R. J. (Editor)

    1981-01-01

    The feasibility analysis of the atmospheric general circulation experiment (AGCE) are documented. The analysis performed in each technical area, the rationale and substantiation for the design approaches selected for the hardware, and the design details for the baseline AGCE are presented.

  10. Pueblo of Laguna Utility Authority Renewable Energy Feasibility Study

    SciTech Connect

    Carolyn Stewart, Red Mountain Tribal Energy

    2008-03-31

    The project, “Renewable Energy Feasibility Study” was designed to expand upon previous work done by the Tribe in evaluating utility formation, generation development opportunities, examining options for creating self-sufficiency in energy matters, and integrating energy management with the Tribe’s economic development goals. The evaluation of project locations and economic analysis, led to a focus primarily on solar projects.

  11. Optically exciting a magnetic memory - A feasibility study

    NASA Technical Reports Server (NTRS)

    Grismore, F. L.; Rhodes, J. E.

    1969-01-01

    Rare earth iron garnets were used in experiments to determine the feasibility of optically pumping a magnetic material to effect the switching process. It was found that rare earth garnets are limited by an absorption edge, only terbium and dysprosium offer a possibility of pumping at energies below the conduction band edge.

  12. Feasibility Study for Aviation Programs at Hudson Valley Community College.

    ERIC Educational Resources Information Center

    Buckley, Edward P.

    This is a report on a survey to determine the feasibility of establishing aviation training programs at a New York community college. It examines existing sources, and present and future needs for commercial pilots, aviation mechanics, and airline stewardesses. Among the conclusions are the discovery that the aviation industry is on the threshold…

  13. A 30/20 GHz FSS feasibility study

    NASA Technical Reports Server (NTRS)

    1987-01-01

    The near term feasibility of direct-to-subscriber services were determined using the 30/20 GHz Fixed Satellite Service (FSS) frequency bands. Those technologies which need to be further developed before such a system can be implemented, were identified. To determine this feasibility, dozens of potential applications were examined for their near-term viability, and the subscriber base of three promising applications were estimated. The system requirements, terminal design, and satellite architecture were all investigated to determine whether a 30/20 GHz FSS system is technically and economically feasible by mid-1990s. It was concluded that such a system is feasible, although maturation of some technologies is needed. This system would likely consist of one or two multibeam satellites serving hub/spoke networks of simple user terminals and more complex, mutli-channel terminals of the service providers. Rain compensation would be accomplished non-adaptively through the use of coding, nonuniform satellite TWT power that is a function of a beam's anticipated downlink fading, and signal regeneration of traffic to the wettest climate regions. It was estimated that a potential market of almost two million users could exist in in the mid-1990s time frame for home banking and financial services via Ka-band satellites.

  14. The Training of Genito Urinary Technicians; A Feasibility Study.

    ERIC Educational Resources Information Center

    Washington State Dept. of Social and Health Services, Olympia. Health Manpower Project.

    Questionnaires were mailed to all (101) practicing urologists in Washington to determine the feasibility of training genito urinary technicians and the desirability of offering specific courses as a Health Manpower Project. This mailing was preceeded by exploratory personal interviews and pretest mailback questionnaires. From the 52 respondent's…

  15. Livingston Parish Landfill Methane Recovery Project (Feasibility Study)

    SciTech Connect

    White, Steven

    2012-11-15

    The Woodside Landfill is owned by Livingston Parish, Louisiana and is operated under contract by Waste Management of Louisiana LLC. This public owner/private operator partnership is commonplace in the solid waste industry today. The landfill has been in operation since approximately 1988 and has a permitted capacity of approximately 41 million cubic yards. Based on an assumed in-place waste density of 0.94 ton per cubic yard, the landfill could have an expected design capacity of 39.3 million tons. The landfill does have an active landfill gas collection and control system (LFGCCS) in place because it meets the minimum thresholds for the New Source Performance Standards (NSPS). The initial LFGCS was installed prior to 2006 and subsequent phases were installed in 2007 and 2010. The Parish received a grant from the United States Department of Energy in 2009 to evaluate the potential for landfill gas recovery and utilization at the Woodside Landfill. This includes a technical and economic feasibility study of a project to install a landfill gas to energy (LFGTE) plant and to compare alternative technologies. The LFGTE plant can take the form of on-site electrical generation, a direct use/medium Btu option, or a high-Btu upgrade technology. The technical evaluation in Section 2 of this report concludes that landfill gas from the Woodside landfill is suitable for recovery and utilization. The financial evaluations in sections 3, 4, and 5 of this report provide financial estimates of the returns for various utilization technologies. The report concludes that the most economically viable project is the Electricity Generation option, subject to the Parish’s ability and willingness to allocate adequate cash for initial capital and/or to obtain debt financing. However, even this option does not present a solid return: by our estimates, there is a 19 year simple payback on the electricity generation option. All of the energy recovery options discussed in this report

  16. Immediate changes in temporomandibular joint opening and pain following vibration therapy: a feasibility pilot study

    PubMed Central

    Muir, Brad; Brown, Courtney; Brown, Tara; Tatlow, Dionne; Buhay, Jeremy

    2014-01-01

    Objective The purpose of this pilot study was to determine the scientific and process feasibility in an effort to direct future larger trials. Methods: Scientific Feasibility: Twelve subjects were randomly allocated to an intervention and a control group. The intervention protocol consisted of intraoral vibration therapy on the muscles of mastication bilaterally for a period of 1 minute per muscle. Process Feasibility: Several feasibility outcomes were examined including recruitment and retention rates and consent. Results: Scientific Feasibility: Large effect sizes were generated for both mouth opening and VAS in favour of the intervention group. Process Feasibility: a recruitment ratio of 2.3 respondents to 1 participant was determined, along with a retention to loss ratio of 13:1 and a consent to loss ratio of 12:0. Conclusion: Scientific Feasibility: The scientific results should be interpreted with caution due to the small sample sizes employed. The study seems to support the scientific feasibility of a future larger single treatment trial. Process Feasibility: Recruitment and retention rates and ratios seem to support future studies. Utilizing the feasibility results of the current study to direct a future larger multiple treatment trial consistent with other comparable TMD studies however is limited. PMID:25550672

  17. Remedial investigation/feasibility study badger army ammunition plant Baraboo, Wisconsin. Volume 3. Feasibility study report (Final)

    SciTech Connect

    1994-08-01

    This Feasibility Study (FS) report for the Badger Army Ammunition Plant (BAAP) in Baraboo, Wisconsin, was prepared by ABB Environmental Services, Inc. (ABB-ES) as a component of Task Order 1 of Contract DAAAl5-91-D-OOO8 with the U.S. Army Environmental Center (USAEC). This report uses the results presented in the Final Remedial Investigation (RI) report (ABB-ES, 1993a) to develop and screen alternatives for remediation of contaminated media at BAAP. The purpose of this FS report is to develop, screen, and evaluate site-specific remedial alternatives to mitigate the impact of site-derived chemicals and ultimately provide protection of human health and the environment. Preferred alternatives for each site are included in this report. Based on previous environmental studies at BAAP, 11 potential hazardous waste sites were ranked according to potential contributions of hazardous chemicals to the environment. These sites were designated as Waste Management Areas because some of the sites contain multiple Solid Waste Management Units (SWMUs). The sites selected to undergo facility assessment and corrective actions are: the Propellant Burning Ground (including Landfill), Deterrent Burning Ground, existing Landfill, Settling Ponds and Spoils Disposal Area, Rocket Paste Area, Oleum Plant and Oleum Plant Pond, Nitroglycerine Pond, old Acid Area, new Acid Area, and Ballistics Pond. The USAEC added an 11th site, the Old Fuel Oil Tank, to the list in October 1989 after discovery of fuel-contaminated soils during excavation of a water line in the vicinity of the old fuel oil tank foundation.

  18. NGST Yardstick Integrated Science Instrument Module (ISIM) Feasibility Study

    NASA Astrophysics Data System (ADS)

    Greenhouse, M. A.; Dipirro, M.; Federline, B.; Gardner, Jonathan P.; Guy, P.; Hagopian, J.; Hein, J.; Jurotich, M.; Lawrence, J.; Martineau, B.; Mather, J. C.; Mentzell, E.; Satyapal, S.; Stanley, D.; Teplitz, H. I.; Travis, J.; Bely, P.; Petro, L. D.; Stockman, P.; Burg, R.; Bitzel, R.

    1998-12-01

    We display portions of the baseline design concept for the NGST Integrated Science Instrument Module (ISIM). This ISIM design is under ongoing development for integration with the "Yardstick" and other NGST 8 m architectures that are intended for packaging in an EELV or Ariane 5 meter class fairing. The goals of this activity are to: [1] demonstrate mission science feasibility, [2] identify ISIM technology challenge areas, [3] assess ISIM engineering and cost feasibility, [5] identify ISIM/NGST interface constraints, and [6] enable smart customer procurement of the ISIM. In this poster, we display a snap shot of work in progress including: optical design, opto-mechanical layout, thermal modeling, focal plane array design, and electronics design. Ongoing progress can be monitored via ISIM team web site: http://ngst.gsfc.nasa.gov/

  19. PTHA Feasibility: a Case Study in the Mediterranean

    NASA Astrophysics Data System (ADS)

    Lorito, S.; Basili, R.; Selva, J.; Romano, F.; Tiberti, M.; Piatanesi, A.; Kastelic, V.

    2012-12-01

    We propose a possible strategy for making Probabilistic Tsunami Hazard Assessment (PTHA) feasible. In principle, our approach can include all known tsunamigenic seismic sources, and numerically simulated tsunami generation propagation and inundation, within an explicit uncertainty treatment. For a given target zone, we start considering the available knowledge on submarine faults geometry and behavior to define a likely over-complete set of causative scenarios. We then calculate tsunami hazard based on wave propagation in the linear approximation ('linear PTHA'), expressed as a probability of exceeding some damage metric threshold in a given time at points at a fixed depth on the seafloor. This choice lessens the computational demand with respect to calculating inundation, and it is performed using a mixed logic/event tree approach which includes, wherever possible, the formal and explicit treatment of epistemic and aleatory uncertainties. We subsequently filter out from our scenario ensemble only the earthquakes giving a significant contribution at the target site by means of a two-step filter. The first step investigates the cumulative distribution of the damage metric to select the regions of the source parameters space that are important to PTHA. The second step uses a pattern recognition technique for undersampling the region of interest without significantly altering PTHA results. The outcome is a significantly reduced minimum set of earthquake scenarios that has to be used for calculating the computationally demanding PTHA inundation maps ('nonlinear PTHA'). Here, we present a case study in the Central Mediterranean sea to illustrate the full procedure for a section of the Hellenic Arc as a source zone and for two target zones, Eastern Sicily and Southern Crete. Extending the procedure to include stochastic slip distributions for the near-field PTHA is straightforward in the event tree; non-seismic sources such as gravitational collapses might be considered

  20. A feasibility study for an International Year of Landcare

    NASA Astrophysics Data System (ADS)

    Mutota, E.; Arnalds, A.

    2009-04-01

    Human-induced activities place enormous pressures on the land worldwide, creating competition and conflict, and suboptimal use of the land. Climate change, loss of biodiversity and land degradation leads to decreasing productivity, food and water shortages, and reduced economic benefits, among others. In order to address these challenges and achieve sustainability goals, the need to change the way global resources are being utilized is crucial. A holistic and integrated community-based approach such as Landcare could be a viable approach to meet this worldwide challenge. Landcare is about committed people working together on land rehabilitation and restoration projects at the local level, transforming attitudes and stimulating new ideas among land users, generating support and building partnerships between and among local communities, governments and the private sector. Landcare initiatives have grown in a number of countries where success stories of actions on the ground clearly show the wider application of the Landcare approach in resolving many of the world's environmental problems and livelihood challenges. However, the potential of Landcare have not yet been widely exploited on a scale that really matters—as local actions build up towards global progress, there is more scope for unified efforts towards a global Landcare movement. Following the recommendation given at the International Forum on Soils, Society and Global Change in 2007 in Iceland (http://www.iisd.ca/YMB/SDFSS/), an International Year of Landcare should be established. Such a year would bring into focus efforts to build local capacity and share knowledge and experiences between provinces, countries and continents on Landcare. Additionally, holding a year concerned with Landcare would greatly contribute to the attainment of the Millennium Development Goals, the UN environmental conventions and many other sustainability goals. Our study supports the notion that Landcare offers a robust platform

  1. FEASIBILITY STUDY OF PRESSURE PULSING PIPELINE UNPLUGGING TECHNOLOGIES FOR HANFORD

    SciTech Connect

    Servin, M. A.; Garfield, J. S.; Golcar, G. R.

    2012-12-20

    The ability to unplug key waste transfer routes is generally essential for successful tank farms operations. All transfer lines run the risk of plugging but the cross site transfer line poses increased risk due to its longer length. The loss of a transfer route needed to support the waste feed delivery mission impacts the cost and schedule of the Hanford clean up mission. This report addresses the engineering feasibility for two pressure pulse technologies, which are similar in concept, for pipeline unplugging.

  2. Long-range eye tracking: A feasibility study

    SciTech Connect

    Jayaweera, S.K.; Lu, Shin-yee

    1994-08-24

    The design considerations for a long-range Purkinje effects based video tracking system using current technology is presented. Past work, current experiments, and future directions are thoroughly discussed, with an emphasis on digital signal processing techniques and obstacles. It has been determined that while a robust, efficient, long-range, and non-invasive eye tracking system will be difficult to develop, such as a project is indeed feasible.

  3. Feasibility study of a microwave radar system for agricultural inspection

    SciTech Connect

    Okelo-Odongo, S.

    1994-10-03

    The feasibility of an impulse radar system for agricultural inspection is investigated. This system would be able to quickly determine the quality of foodstuffs that are passed through the system. A prototype was designed at the Lawrence Livermore National Laboratory and this report discusses it`s evaluation. A variety of apples were used to test the system and preliminary data suggests that this technology holds promise for successful application on a large scale in food processing plants.

  4. Feasibility study--computerized application of the hazardous material regulations

    SciTech Connect

    Ferrada, J.J.; Green, V.M.; Rawl, R.R.

    1992-09-01

    The feasibility of developing a full expert system for transportation and packaging of hazardous and radioactive materials was initiated within the framework of three subtasks: (1) analysis of commercial packages related to regulation scanning, (2) analysis of computer languages to develop the expert system, and (3) development of expert system prototypes. The strategy to develop the latter subtask was to first,develop modules to capture the knowledge of different areas of transportation and packaging and second, to analyze the feasibility of appending these different modules in one final full package. The individual modules development contemplated one prototype for transporting and packaging of radioactive material and another for transporting hazardous chemical materials. In the event that it is not feasible to link these two packages, the modules can always be used as stand-alone tools, or linked as a single package with some restrictions in their applicability. The work done during this fiscal year has focused on developing a prototype for transporting radioactive materials.

  5. Geosynchronous Microwave Atmospheric Sounding Radiometer (MASR) antenna feasibility study. Volume 3: Antenna feasibility

    NASA Technical Reports Server (NTRS)

    Villeneuve, A. T.

    1978-01-01

    Antenna systems capable of operating with a multichannel microwave radiometer intended for mapping severe storm activity over patches on the surface of the earth 750 km square were compared. These systems included a paraboloidal reflector with an offset focal point feed, and a symmetrical Cassegrain reflector system. Both systems are acceptable from the point of view of beam efficiency, however, from the point of view of maintaining the required positional accuracies and surface tolerances, as well as from the point of view of manufacturability, cost effectiveness, and technical risk, the symmetrical Casegrain was selected as the preferred configuration. Performance characteristics were calculated and a mechanical design study was conducted to provide estimates of the technical risk, costs, and development time required for the construction of such an antenna system.

  6. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... studies. 101-5.104-6 Section 101-5.104-6 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will...

  7. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... studies. 101-5.104-6 Section 101-5.104-6 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will...

  8. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... studies. 101-5.104-6 Section 101-5.104-6 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will...

  9. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... studies. 101-5.104-6 Section 101-5.104-6 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will...

  10. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... studies. 101-5.104-6 Section 101-5.104-6 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will...

  11. Feasibility study of sedimentary enhanced geothermal systems using reservoir simulation

    NASA Astrophysics Data System (ADS)

    Cho, Jae Kyoung

    The objective of this research is to evaluate the preliminary feasibility of commercial geothermal projects, from a sedimentary reservoir with low permeability that requires productivity enhancement, using numerical reservoir simulation. The performance of a sedimentary geothermal reservoir is investigated in terms of reservoir hydraulics and thermal evolution. To build a reliable benchmark for simulation study, validation of the numerical reservoir model with respect to an analytical model is presented, and the process to achieve an acceptable match between the numerical and analytical solutions is described. The analytical model used in this study is based on the work of Gringarten (1978), which consists of a conceptual geothermal reservoir, considering an injection and production well doublet in a homogeneous porous media. A commercial thermal reservoir simulator (STARS from Computer Modeling Group, CMG) is used in this work for numerical modeling. In order to reproduce the analytical model results, the numerical simulation model is modified to include the same assumptions of the analytical model. Simulation model parameters that make the numerical results deviate from the analytical solution, such as the grid block size, time step and no-flow boundary are identified and investigated. An analytical tracer test model proposed by Shook (2000) is numerically modeled. This model allows us to predict the time when the temperature of the produced water decreases by capturing a tracer component at production well. Reservoir simulation models with different porosity and permeability distribution are tested to see the effects of reservoir inhomogeneity and anisotropy. In particular, premature thermal breakthrough due to the presence of high permeability streak in a reservoir model is simulated. In an effort to apply the knowledge we obtained from the analytical solutions, the effects of reservoir rock and water properties, as a function of pressure and temperature, are

  12. Defining Feasibility and Pilot Studies in Preparation for Randomised Controlled Trials: Development of a Conceptual Framework.

    PubMed

    Eldridge, Sandra M; Lancaster, Gillian A; Campbell, Michael J; Thabane, Lehana; Hopewell, Sally; Coleman, Claire L; Bond, Christine M

    2016-01-01

    We describe a framework for defining pilot and feasibility studies focusing on studies conducted in preparation for a randomised controlled trial. To develop the framework, we undertook a Delphi survey; ran an open meeting at a trial methodology conference; conducted a review of definitions outside the health research context; consulted experts at an international consensus meeting; and reviewed 27 empirical pilot or feasibility studies. We initially adopted mutually exclusive definitions of pilot and feasibility studies. However, some Delphi survey respondents and the majority of open meeting attendees disagreed with the idea of mutually exclusive definitions. Their viewpoint was supported by definitions outside the health research context, the use of the terms 'pilot' and 'feasibility' in the literature, and participants at the international consensus meeting. In our framework, pilot studies are a subset of feasibility studies, rather than the two being mutually exclusive. A feasibility study asks whether something can be done, should we proceed with it, and if so, how. A pilot study asks the same questions but also has a specific design feature: in a pilot study a future study, or part of a future study, is conducted on a smaller scale. We suggest that to facilitate their identification, these studies should be clearly identified using the terms 'feasibility' or 'pilot' as appropriate. This should include feasibility studies that are largely qualitative; we found these difficult to identify in electronic searches because researchers rarely used the term 'feasibility' in the title or abstract of such studies. Investigators should also report appropriate objectives and methods related to feasibility; and give clear confirmation that their study is in preparation for a future randomised controlled trial designed to assess the effect of an intervention.

  13. [Feasibility study of the Doppler exploration of the renal artery].

    PubMed

    Milon, P; Clavier, E; Genevois, A; Benozio, M

    1990-03-01

    Using arteriography as a reference, the authors investigate the feasibility of pulsed doppler exploration of the normal or pathological renal arteries in 46 successive patients. The poor sensitivity of pulsed doppler, mainly due to the considerable anatomical variations of the renal pedicle, does not currently allow using this technique for the detection of renal arterial stenosis. When combined with angiography, pulsed doppler becomes a definite asset in therapeutic radiology to help in the choice of a treatment and in follow-up. PMID:2191123

  14. Feasiblity study for a 34 GHz (Ka band) gyroamplifier

    NASA Technical Reports Server (NTRS)

    Stone, D. S.; Bier, R. E.; Caplan, M.; Huey, H. E.; Pirkle, D. R.; Robinson, J. D.; Thompson, L.

    1984-01-01

    The feasibility of using a gyroklystron power tube as the final amplifier in a 400 kW CW 34 GHz transmitter on the Goldstone Antenna is investigated. A conceptual design of the gyroklystron and the transmission line connecting it with the antenna feed horn is presented. The performance characteristics of the tube and transmission line are compared to the transmitter requirements for a deep space radar system. Areas of technical risk for a follow-on hardware development program for the gyroklystron amplifier and overmoded transmission line components are discussed.

  15. Experimental feasibility study of a thermoelectric heat flux gage

    NASA Technical Reports Server (NTRS)

    Vanfossen, G. J.; Lopez, I.

    1983-01-01

    An experiment was conducted to determine the feasibility of using a commercially available thermoelectric device as a heat flux gage at near ambient conditions. In certain research applications, the thermoelectric heat flux gage can provide a relatively simple means to model a warm fluid cold wall convection environment. The experiment showed that heat flux through the gage could be correlated within 2.5 percent with a simple algebraic equation which considered the thermoelectric current through the device and the hot and cold side temperatures.

  16. Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

    NASA Technical Reports Server (NTRS)

    Flores, Melissa; Malin, Jane T.

    2013-01-01

    An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component s functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

  17. Feasibility study of inlet shock stability system of YF-12

    NASA Technical Reports Server (NTRS)

    Blausey, G. C.; Coleman, D. M.; Harp, D. S.

    1972-01-01

    The feasibility of self actuating bleed valves as a shock stabilization system in the inlet of the YF-12 is considered for vortex valves, slide valves, and poppet valves. Analytical estimation of valve performance indicates that only the slide and poppet valves located in the inlet cowl can meet the desired steady state stabilizing flows, and of the two the poppet valve is substantially faster in response to dynamic disturbances. The poppet valve is, therefore, selected as the best shock stability system for the YF-12 inlet.

  18. Feasibility study of real-time planning for stereotactic radiosurgery

    SciTech Connect

    Zhang Qinghui; Song Yulin; Chan, Maria; Burman, Chandra; Yamada, Yoshiya

    2013-03-15

    Purpose: 3D rotational setup errors in radiotherapy are often ignored by most clinics due to inability to correct or simulate them accurately and efficiently. There are two types of rotation-related problems in a clinical setting. One is to assess the affected dose distribution in real-time if correction is not applied and the other one is to correct the rotational setup errors prior to the initiation of the treatment. Here, the authors present the analytical solutions to both problems. Methods: (1) To assess the real-time dose distribution, eight stereotactic radiosurgery (SRS) cases were used as examples. For each plan, two new sets of beams with different table, gantry, and collimator angles were given in analytical forms as a function of patient rotational errors. The new beams simulate the rotational effects of the patient during the treatment setup. By using one arbitrary set of beams, SRS plans were recomputed with a series of different combinations of patient rotational errors, ranging from (-5 Degree-Sign , -5 Degree-Sign , -5 Degree-Sign ) to (5 Degree-Sign , 5 Degree-Sign , 5 Degree-Sign ) (roll, pitch, and yaw) with an increment of 1 Degree-Sign and compared with those without rotational errors. For each set of rotational errors, its corresponding equivalent beams were computed using the analytical solutions and then used for dose calculation. (2) To correct for the rotational errors, two new sets of table, gantry, and collimator angles were derived analytically to validate the previously published derivation. However, in the derivation, a novel methodology was developed and two sets of table, gantry, and collimator angles were obtained in analytical forms. The solutions provide an alternative approach to rotational error correction by rotating the couch, gantry, and collimator rather than the patient. Results: For demonstration purpose, the above-derived new beams were implemented in a treatment planning system (TPS) to study the rotational effects on

  19. 7 CFR 4280.176 - Feasibility study grant applications-content.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.176... renewable energy system. (10) If the applicant is a rural small business, certification that the feasibility study grant will be for a renewable energy system project that is located in a rural area. (11)...

  20. Space shuttle program information control and retrieval system feasibility study report

    NASA Technical Reports Server (NTRS)

    Lingle, C. P.

    1973-01-01

    The feasibility of having a common information management network for space shuttle data, is studied. Identified are the information types required, sources and users of the information, and existing techniques for acquiring, storing and retrieving the data. The study concluded that a decentralized system is feasible, and described a recommended development plan for it.

  1. 7 CFR 4280.176 - Feasibility study grant applications-content.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.176... renewable energy system. (10) If the applicant is a rural small business, certification that the feasibility study grant will be for a renewable energy system project that is located in a rural area. (11)...

  2. 7 CFR 4280.176 - Feasibility study grant applications-content.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.176... renewable energy system. (10) If the applicant is a rural small business, certification that the feasibility study grant will be for a renewable energy system project that is located in a rural area. (11)...

  3. Australian Newspaper Index Feasibility Study. Development of Resource Sharing Networks. Networks Study No. 13.

    ERIC Educational Resources Information Center

    Stafford, Robert

    This study of the need for and feasibility of creating an Australian newspaper index comprises a brief historical background; an outline of the current position regarding access to newspapers, including the international scene; an assessment of the need for an Australian newspaper index; recommendations on the breadth and depth of subject coverage…

  4. Wisconsin Elementary Teacher Education Project. Volume VI, Feasibility Study: Pricing and Economic Analysis Study. Final Report.

    ERIC Educational Resources Information Center

    Wisconsin Univ., Madison.

    This document is the second volume of the feasibility study report for the Wisconsin Elementary Teacher Education Project. It provides in part 1 data on program, planning and budgeting, including cost figures for preparing students in the present and new programs, marginal expenses, and costs for implementing the program on other campuses. Part 2…

  5. Feasibility study for future implantable neural-silicon interface devices.

    PubMed

    Al-Armaghany, Allann; Yu, Bo; Mak, Terrence; Tong, Kin-Fai; Sun, Yihe

    2011-01-01

    The emerging neural-silicon interface devices bridge nerve systems with artificial systems and play a key role in neuro-prostheses and neuro-rehabilitation applications. Integrating neural signal collection, processing and transmission on a single device will make clinical applications more practical and feasible. This paper focuses on the wireless antenna part and real-time neural signal analysis part of implantable brain-machine interface (BMI) devices. We propose to use millimeter-wave for wireless connections between different areas of a brain. Various antenna, including microstrip patch, monopole antenna and substrate integrated waveguide antenna are considered for the intra-cortical proximity communication. A Hebbian eigenfilter based method is proposed for multi-channel neuronal spike sorting. Folding and parallel design techniques are employed to explore various structures and make a trade-off between area and power consumption. Field programmable logic arrays (FPGAs) are used to evaluate various structures. PMID:22254974

  6. Conducting Online Expert panels: a feasibility and experimental replicability study

    PubMed Central

    2011-01-01

    Background This paper has two goals. First, we explore the feasibility of conducting online expert panels to facilitate consensus finding among a large number of geographically distributed stakeholders. Second, we test the replicability of panel findings across four panels of different size. Method We engaged 119 panelists in an iterative process to identify definitional features of Continuous Quality Improvement (CQI). We conducted four parallel online panels of different size through three one-week phases by using the RAND's ExpertLens process. In Phase I, participants rated potentially definitional CQI features. In Phase II, they discussed rating results online, using asynchronous, anonymous discussion boards. In Phase III, panelists re-rated Phase I features and reported on their experiences as participants. Results 66% of invited experts participated in all three phases. 62% of Phase I participants contributed to Phase II discussions and 87% of them completed Phase III. Panel disagreement, measured by the mean absolute deviation from the median (MAD-M), decreased after group feedback and discussion in 36 out of 43 judgments about CQI features. Agreement between the four panels after Phase III was fair (four-way kappa = 0.36); they agreed on the status of five out of eleven CQI features. Results of the post-completion survey suggest that participants were generally satisfied with the online process. Compared to participants in smaller panels, those in larger panels were more likely to agree that they had debated each others' view points. Conclusion It is feasible to conduct online expert panels intended to facilitate consensus finding among geographically distributed participants. The online approach may be practical for engaging large and diverse groups of stakeholders around a range of health services research topics and can help conduct multiple parallel panels to test for the reproducibility of panel conclusions. PMID:22196011

  7. A FEASIBILITY STUDY FOR DETERMINING REQUIREMENTS OF BIOLOGICAL INFORMATION SERVICES AND SYSTEMS.

    ERIC Educational Resources Information Center

    KINKADE, ROBERT G.; VAN COTT, HAROLD P.

    EVALUATED WAS THE FEASIBILITY OF USING A PILOT INFORMATION CLEARINGHOUSE AS A RESEARCH TOOL FOR DEFINING DESIGN REQUIREMENTS FOR AN ADVANCED BIOLOGICAL INFORMATION CENTER. SPECIFIC OBJECTIVES WERE (1) TO DEVELOP A METHOD FOR STUDYING THE SCIENCE INFORMATION REQUIREMENTS OF BIOLOGICAL SCIENTISTS, (2) TO EVALUATE THE FEASIBILITY OF USING THE METHOD…

  8. Establishing Ongoing, Early Identification Programs for Mental Health Problems in Our Schools: A Feasibility Study

    ERIC Educational Resources Information Center

    Nemeroff, Robin; Levitt, Jessica Mass; Faul, Lisa; Wonpat-Borja, Ahtoy; Bufferd, Sara; Setterberg, Stephen; Jensen, Peter S.

    2008-01-01

    The study evaluates the feasibility and effectiveness of several mental health screening and assessment tools in schools. A computerized version of the Diagnostic Interview Schedule for Children-IV proved to be feasible bridging the gap between mental health providers and unmet need of children accompanying risks.

  9. Comprehensive Renewable Energy Feasibility Study for the Makah Indian Tribe

    SciTech Connect

    RobertLynette; John Wade; Larry Coupe

    2005-03-31

    The purpose of this project was to determine the technical feasibility, economic viability, and potential impacts of installing and operating a wind power station and/or small hydroelectric generation plants on the Makah reservation. The long-term objective is to supply all or a portion of Tribe's electricity from local, renewable energy sources in order to reduce costs, provide local employment, and reduce power outages. An additional objective was for the Tribe to gain an understanding of the requirements, costs, and benefits of developing and operating such plants on the reservation. The Makah Indian Reservation, with a total land area of forty-seven square miles, is located on the northwestern tip of the Olympic Peninsula in Washington State. Four major watersheds drain the main Reservation areas and the average rainfall is over one hundred inches per year. The reservation's west side borders the Pacific Ocean, but mostly consists of rugged mountainous terrain between 500 and 1,900 feet in elevation. Approximately 1,200 tribal members live on the Reservation and there is an additional non-Indian residential population of about 300. Electric power is provided by the Clallam County PUD. The annual usage on the reservation is approximately 16,700 mWh. Project Work Wind Energy--Two anemometer suites of equipment were installed on the reservation and operated for a more than a year. An off-site reference station was identified and used to project long-term wind resource characteristics at the two stations. Transmission resources were identified and analyzed. A preliminary financial analysis of a hypothetical wind power station was prepared and used to gauge the economic viability of installation of a multi-megawatt wind power station. Small Hydroelectric--Two potential sites for micro/small-hydro were identified by analysis of previous water resource studies, topographical maps, and conversations with knowledgeable Makah personnel. Field trips were conducted to

  10. Spaceflight Operations Services Grid (SOSG) Prototype Implementation and Feasibility Study

    NASA Technical Reports Server (NTRS)

    Bradford, Robert N.; Thigpen, William W.; Lisotta, Anthony J.; Redman, Sandra

    2004-01-01

    , video, telemetry and commanding systems. Once the User-based services are in place, they will be analyzed to establish feasibility for Grid enabling. If feasible then each User-based service will be Grid enabled. The remaining non-Grid services if not already Web enabled will be so enabled. In the end, four portals will be developed one for each VO. Each portal will contain the appropriate User-based services required for that VO to operate.

  11. Feasibility study: Atmospheric general circulation experiment, volume 1

    NASA Technical Reports Server (NTRS)

    Homsey, R. J. (Editor)

    1981-01-01

    The atmospheric general circulation experiment (AGCE) uses a rotating fluid flow cell assembly. The key technical areas affecting the feasibility of the design and operation of the AGCE are investigated. The areas investigated include materials for the flow cell assembly, thermal design, high voltage power supply design, effective retrieval and handling of experiment data and apparatus configuration. Several materials, DMSO and m-tolunitrile, were selected as candidate fluids for the flow cell principally for their high dielectric constant which permits the high voltage power supply design to be held to 15 kV and still simulate terrestrial gravity. Achievement of a low dissipation factor in the fluid to minimize internal heating from the applied electrical field depends strongly on purification and handling procedures. The use of sapphire as the outer hemisphere for the flow cell provides excellent viewing conditions without a significant impact on attaining the desired thermal gradients. Birefringent effects from sapphire can be held to acceptably low limits. Visualization of flow fluid is achieved through the motion of a dot matrix formed by photochromic dyes. Two dyes found compatible with the candidate fluids are spiropyran and triarylmethane. The observation of the dot motion is accomplished using a flying spot scanner.

  12. Adaptive radiotherapy for invasive bladder cancer: A feasibility study

    SciTech Connect

    Pos, Floris J. . E-mail: f.pos@nki.nl; Hulshof, Maarten; Lebesque, Joos; Lotz, Heidi; Tienhoven, Geertjan van; Moonen, Luc; Remeijer, Peter

    2006-03-01

    Purpose: To evaluate the feasibility of adaptive radiotherapy (ART) in combination with a partial bladder irradiation. Methods and Materials: Twenty-one patients with solitary T1-T4 N0M0 bladder cancer were treated to the bladder tumor + 2 cm margin planning target volume (PTV{sub CONV}). During the first treatment week, five daily computed tomography (CT) scans were made immediately before or after treatment. In the second week, a volume was constructed encompassing the gross tumor volumes (GTVs) on the planning scan and the five CT scans (GTV{sub ART}). The GTV{sub ART} was expanded with a 1 cm margin for the construction of a PTV{sub ART}. Starting in the third week, patients were treated to PTV{sub ART}. Repeat CT scans were used to evaluate treatment accuracy. Results: On 5 of 91 repeat CT scans (5%), the GTV was not adequately covered by the PTV{sub ART}. On treatment planning, there was only one scan in which the GTV was not adequately covered by the 95% isodose. On average, the treatment volumes were reduced by 40% when comparing PTV{sub ART} with PTV{sub CONV} (p < 0.0001). Conclusion: The adaptive strategy for bladder cancer is an effective way to deal with treatment errors caused by variations in bladder tumor position and leads to a substantial reduction in treatment volumes.

  13. Feasibility Study of a HOM IOT for TESLA

    NASA Astrophysics Data System (ADS)

    Schütt, Petra; Weiland, Thomas; Gamp, Alexander; Lu, Fuhai

    1997-05-01

    For the TESLA linear collider 1.3 GHz RF sources with 10 MW peak power and about 70% efficiency are needed. As an alternative to the development of a Multibeam-Klystron, we investigate the feasibility of an IOT (Inductive Output Tube). This is a very compact RF source: The time structure of the beam is produced by a gated emission cathode and the output cavity is directly adjacent to the anode. Unlike IOTs, conventional klystrons lose some of their design efficiency when they are operated below saturation, because only the RF component of the beam is reduced and not the DC beam current. In contrast to this the cathode current of an IOT is controlled by the drive power. In order to keep the gun voltage low, we investigate a device with a hollow beam where the output cavity is excited in a higher order mode (HOM), as was recently suggested by CPI(E.Lien, H.Bohlen, US Patent Application Serial No. 08/413,034). Computer simulations are carried out with the CAD-system MAFIA. First, an existing Klystrode TM IOT built by CPI is analysed. Simulation results will be shown and compared to experimental data. Based upon this experience, a design strategy is discussed for the HOM IOT.

  14. Renewable Energy Development on Fort Mojave Reservation Feasiblity Study

    SciTech Connect

    Russell Gum, ERCC analytics LLC

    2008-03-17

    The Ft. Mojave tribe, whose reservation is located along the Colorado River in the states of Arizona, California, and Nevada near the point where all three states meet, has a need for increased energy supplies. This need is a direct result of the aggressive and successful economic development projects undertaken by the tribe in the last decade. While it is possible to contract for additional energy supplies from fossil fuel sources it was the desire of the tribal power company, AHA MACAV Power Service (AMPS) to investigate the feasibility and desirability of producing power from renewable sources as an alternative to increased purchase of fossil fuel generated power and as a possible enterprise to export green power. Renewable energy generated on the reservation would serve to reduce the energy dependence of the tribal enterprises on off reservation sources of energy and if produced in excess of reservation needs, add a new enterprise to the current mix of economic activities on the reservation. Renewable energy development would also demonstrate the tribe’s support for improving environmental quality, sustainability, and energy independence both on the reservation and for the larger community.

  15. Engaging Community Businesses in HIV Prevention: A Feasibility Study

    PubMed Central

    Rovniak, Liza S.; Hovell, Melbourne F.; Hofstetter, C. Richard; Blumberg, Elaine J.; Sipan, Carol L.; Batista, Marcia F.; Martinez-Donate, Ana P.; Mulvihill, Mary M.; Ayala, Guadalupe X.

    2009-01-01

    Purpose To explore the feasibility of engaging community businesses in HIV prevention. Design Randomly selected business owners/managers were asked to display discreetly wrapped condoms and brochures provided free-of-charge for 3 months. Assessments were conducted at baseline, mid-, and post-program. Customer feedback was obtained through an online survey. Setting San Diego, California neighborhood with a high rate of AIDS. Subjects Fifty-one business owners/managers representing 10 retail categories, and 52 customers. Measures Participation rates, descriptive characteristics, number of condoms and brochures distributed, customer feedback, business owners'/managers' program satisfaction and willingness to provide future support for HIV prevention. Analysis Kruskal-Wallis, Mann-Whitney U, Fisher's exact, and McNemar's tests were used to analyze data. Results The 20 business owners/managers (39%) who agreed to distribute condoms and brochures reported fewer years in business and more employees than those who agreed only to distribute brochures (20%) or refused to participate (41%), p <.05. Bars were the easiest of ten retail categories to recruit. Businesses with more employees and customers distributed more condoms and brochures, p < .05. More than 90% of customers supported distributing condoms and brochures in businesses and 96% of business owners/managers described their program experience as “positive.” Conclusion Businesses are willing to distribute condoms and brochures to prevent HIV. Policies to increase business participation in HIV prevention should be developed and tested. PMID:20465150

  16. An Experimental Feasibility Study on Robotic Endonasal Telesurgery

    PubMed Central

    Wirz, Raul; Torres, Luis; Swaney, Philip; Gilbert, Hunter; Alterovitz, Ron; Webster, Robert J.; Weaver, Kyle D.; Russell, Paul T.

    2014-01-01

    Background Novel robots have recently been developed specifically for endonasal surgery. They can deliver several thin, tentacle-like surgical instruments through a single nostril. Among the many potential advantages of such a robotic system is the prospect of telesurgery over long distances. Objective To describe a phantom pituitary tumor removal done by a surgeon in Nashville, Tennessee, controlling a robot located approximately 800 km away in Chapel Hill, North Carolina. This is the first remote telesurgery experiment involving tentacle-like concentric tube manipulators. Methods A phantom pituitary tumor removal experiment was conducted twice – once locally and once remotely – using the robotic system. Robot commands and video were transmitted across the Internet. The latency of the system was evaluated quantitatively in both local and remote cases to determine the effect of the 800 km between the surgeon and robot. Results We measured a control and video latency of less than 100 ms in the remote case. Qualitatively, the surgeon was able to carry out the experiment easily, and observed no discernable difference between the remote and local cases. Conclusion Telesurgery over long distances is feasible with this robotic system. In the longer term, this may enable expert skull base surgeons to help many more patients by performing surgeries remotely over long distances. PMID:25599203

  17. Using Wearable Computers in Shuttle Processing: A Feasibility Study

    NASA Technical Reports Server (NTRS)

    Centeno, Martha A.; Correa, Daisy; Groh-Hammond, Marcia

    2001-01-01

    Shuttle processing operations are performed following prescribed instructions compiled in a Work Authorization Document (WAD). Until very recently, WADs were printed so that they could be properly executed, including the buy off of each and every step by the appropriate authorizing agent. However, with the development of EPICs, Maximo, and PeopleSoft applications, some of these documents are now available in electronic format; hence, it is possible for technicians and engineers to access them on line and buy off the steps electronically. To take full advantage of these developments, technicians need access to such documents at the point of job execution. Body wearable computers present an opportunity to develop a WAD delivery system that enables access while preserving technician's mobility, safety levels, and quality of work done. The primary objectives of this project were to determine if body wearable computers are a feasible delivery system for WADs. More specifically, identify and recommend specific brands of body wearable computers readily available on the market. Thus, this effort has field-tested this technology in two areas of shuttle processing, and it has examined the usability of the technology. Results of two field tests and a Human Factors Usability Test are presented. Section 2 provides a description of the body wearable computer technology. Section 3 presents the test at the Space Shuttle Main Engine (SSME) Shop. Section 4 presents the results of the integration test at the Solid Rocket Boosters Assembly and Refurbishing Facility (SRBARF). Section 5 presents the results of the usability test done at the Operations Support Building (OSB).

  18. Comparative feasibility study of two concepts for a space-based astrometric satellite

    NASA Technical Reports Server (NTRS)

    Bamdermann, L.; Bareket, N.; Metheny, W.

    1982-01-01

    A comparative feasibility study of two concepts for an astrometric satellite: a visual imaging telescope with a 16.5 meter focal length and a white light interferometer with a 15 meter baseline separation was conducted.

  19. 3D-Flow processor for a programmable Level-1 trigger (feasibility study)

    SciTech Connect

    Crosetto, D.

    1992-10-01

    A feasibility study has been made to use the 3D-Flow processor in a pipelined programmable parallel processing architecture to identify particles such as electrons, jets, muons, etc., in high-energy physics experiments.

  20. Feasibility Study of the Pregnancy Risk Assessment Monitoring System in Iran

    PubMed Central

    KHARAGHANI, Roghieh; SHARIATI, Mohammad; YUNESIAN, Masud; KERAMAT, Afsaneh; MOGHISI, Alireza

    2014-01-01

    Background: A surveillance system helps to detect epidemics and the pattern of the incidence of the problems in the community and is important for evidence based decision making. This study was conducted to determine the feasibility of the Pregnancy Risk Assessment Monitoring System (PRAMS) in Iran. Methods: PRAMS feasibility was assessed in a cross-sectional study in the city of Shahriar, located in the west of Tehran in 2013. In this study, 811 women within 2 to 6 months postpartum who had a live or still birth were selected from thyroid screening forms and hospital records through a systematic simple random sampling method. Trained interviewers collected the data via calling mothers from health centers or through home visits. The outcome was tested on the “TELOS” model including technical, economic, legal, operational and schedule feasibility components. Results: Thirty-seven health volunteers collected the data in this study. Many prevalence estimates were comparable with national and Tehran data (technical feasibility). A home based completed questionnaire cost 2.45 and a phone cost 1.89 USD (economic feasibility). The project was consistent with legal requirements (legal feasibility). The participation rate was 92.8% (95%CI: 92.7–95.3) for home visits and 90.9% (95% CI: 87.3–93.6) for the phonemethod. Over 80% of different sections of the questionnaire were completed (operational feasibility). All data collection processes took 35 days (schedule feasibility). Conclusion: The adapted PRAMS could be considered feasible in Iran. Its widespread and periodic implementation can provide valuable maternal and child health information in the country. PMID:26171360

  1. Defining Feasibility and Pilot Studies in Preparation for Randomised Controlled Trials: Development of a Conceptual Framework

    PubMed Central

    Eldridge, Sandra M.; Lancaster, Gillian A.; Campbell, Michael J.; Thabane, Lehana; Hopewell, Sally; Coleman, Claire L.; Bond, Christine M.

    2016-01-01

    We describe a framework for defining pilot and feasibility studies focusing on studies conducted in preparation for a randomised controlled trial. To develop the framework, we undertook a Delphi survey; ran an open meeting at a trial methodology conference; conducted a review of definitions outside the health research context; consulted experts at an international consensus meeting; and reviewed 27 empirical pilot or feasibility studies. We initially adopted mutually exclusive definitions of pilot and feasibility studies. However, some Delphi survey respondents and the majority of open meeting attendees disagreed with the idea of mutually exclusive definitions. Their viewpoint was supported by definitions outside the health research context, the use of the terms ‘pilot’ and ‘feasibility’ in the literature, and participants at the international consensus meeting. In our framework, pilot studies are a subset of feasibility studies, rather than the two being mutually exclusive. A feasibility study asks whether something can be done, should we proceed with it, and if so, how. A pilot study asks the same questions but also has a specific design feature: in a pilot study a future study, or part of a future study, is conducted on a smaller scale. We suggest that to facilitate their identification, these studies should be clearly identified using the terms ‘feasibility’ or ‘pilot’ as appropriate. This should include feasibility studies that are largely qualitative; we found these difficult to identify in electronic searches because researchers rarely used the term ‘feasibility’ in the title or abstract of such studies. Investigators should also report appropriate objectives and methods related to feasibility; and give clear confirmation that their study is in preparation for a future randomised controlled trial designed to assess the effect of an intervention. PMID:26978655

  2. Feasibility study for geothermal-water space heating for the Safford Federal Prison Camp, Safford, Arizona

    SciTech Connect

    Not Available

    1981-07-01

    The results of an economic feasibility study for the Oregon Institute of Technology regarding a geothermal heating system for the Federal Prison Camp, Safford, Arizona are presented. The following aspects were examined: heat load calculations of the buildings involved; mechanical equipment retrofits necessary to accept geothermal water for the purpose of space heating; cost estimates for the equipment retrofit; and evaluation of the equipment retrofit to determine economic feasibility.

  3. A feasibility study for advanced technology integration for general aviation

    NASA Technical Reports Server (NTRS)

    Kohlman, D. L.; Matsuyama, G. T.; Hawley, K. E.; Meredith, P. T.

    1980-01-01

    An investigation was conducted to identify candidate technologies and specific developments which offer greatest promise for improving safety, fuel efficiency, performance, and utility of general aviation airplanes. Interviews were conducted with general aviation airframe and systems manufacturers and NASA research centers. The following technologies were evaluated for use in airplane design tradeoff studies conducted during the study: avionics, aerodynamics, configurations, structures, flight controls, and propulsion. Based on industry interviews and design tradeoff studies, several recommendations were made for further high payoff research. The most attractive technologies for use by the general aviation industry appear to be advanced engines, composite materials, natural laminar flow airfoils, and advanced integrated avionics systems. The integration of these technologies in airplane design can yield significant increases in speeds, ranges, and payloads over present aircraft with 40 percent to 50 percent reductions in fuel used.

  4. Feasibility Study for Vitrification of Sodium-Bearing Waste

    SciTech Connect

    J. J. Quigley; B. D. Raivo; S. O. Bates; S. M. Berry; D. N. Nishioka; P. J. Bunnell

    2000-09-01

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated under a Settlement Agreement between the Department of Energy and the State of Idaho. One of the requirements of the Settlement Agreement is the complete calcination (i.e., treatment) of all SBW by December 31, 2012. One of the proposed options for treatment of SBW is vitrification. This study will examine the viability of SBW vitrification. This study describes the process and facilities to treat the SBW, from beginning waste input from INTEC Tank Farm to the final waste forms. Schedules and cost estimates for construction and operation of a Vitrification Facility are included. The study includes a facility layout with drawings, process description and flow diagrams, and preliminary equipment requirements and layouts.

  5. Computer-Based Information Services in Medicine: A Feasibility Study.

    ERIC Educational Resources Information Center

    Cox, P. H.; And Others

    The objectives of this study were to examine the need and potential demand for computer-based information services in the University of Otago medical libraries, to evaluate the various databases of interest, and to recommend the best means of access to such services. Data were collected through user and library surveys, an extensive literature…

  6. Feasibility study of using satellites for a disaster warning system

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The development of requirements for the Disaster Warning System (DWS) was investigated in relation to the National Weather Service. Conceptual communication traffic flow patterns for the future of the NWS are studied to determine the impact of the DWS on the MWS. The planned warning systems, and satellite communications are discussed along with data collection, and communication services.

  7. Feasibility study of algae-based Carbon Dioxide capture

    EPA Science Inventory

    SUMMARY: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertak...

  8. Feasibility study of algae-based CO2 capture

    EPA Science Inventory

    The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertaken to eval...

  9. ACLCP Periodical Storage Center: Feasibility Study, September 1974-April 1975.

    ERIC Educational Resources Information Center

    Cieslicki, Dorothy

    A study of alternative models for establishing a cooperative storage center for little used library materials by the members of the Area College Libraries of Central Pennsylvania (ACLCP) focused on periodicals. Considerations discussed include advantages--lower cost; space for growth and better access to holdings retained in active collections;…

  10. Insect-Based Vision for Autonomous Vehicles: A Feasibility Study

    NASA Technical Reports Server (NTRS)

    Srinivasan, Mandyam V.

    1999-01-01

    The aims of the project were to use a high-speed digital video camera to pursue two questions: (1) To explore the influence of temporal imaging constraints on the performance of vision systems for autonomous mobile robots; (2) To study the fine structure of insect flight trajectories in order to better understand the characteristics of flight control, orientation and navigation.

  11. Insect-Based Vision for Autonomous Vehicles: A Feasibility Study

    NASA Technical Reports Server (NTRS)

    Srinivasan, Mandyam V.

    1999-01-01

    The aims of the project were to use a high-speed digital video camera to pursue two questions: i) To explore the influence of temporal imaging constraints on the performance of vision systems for autonomous mobile robots; To study the fine structure of insect flight trajectories with in order to better understand the characteristics of flight control, orientation and navigation.

  12. Insect monitoring with fluorescence lidar techniques: feasibility study.

    PubMed

    Brydegaard, Mikkel; Guan, Zuguang; Wellenreuther, Maren; Svanberg, Sune

    2009-10-20

    We investigate the possibilities of light detection and ranging (lidar) techniques to study migration of the damselfly species Calopteryx splendens and C. virgo. Laboratory and testing-range measurements at a distance of 60 m were performed using dried, mounted damselfly specimens. Laboratory measurements, including color photography in polarized light and spectroscopy of reflectance and induced fluorescence, reveal that damselflies exhibit reflectance and fluorescence properties that are closely tied to the generation of structural color. Lidar studies on C. splendens of both genders show that gender can be remotely determined, especially for specimens that were marked with Coumarin 102 and Rhodamine 6G dyes. The results obtained in this study will be useful for future field experiments, and provide guidelines for studying damselflies in their natural habitat using lidar to survey the air above the river surface. The findings will be applicable for many other insect species and should, therefore, bring new insights into migration and movement patterns of insects in general. PMID:19844299

  13. Feasibility study of algae-based CO2 capture

    EPA Science Inventory

    Abstract: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being underta...

  14. Community paediatric respiratory infection surveillance study protocol: a feasibility, prospective inception cohort study

    PubMed Central

    Anderson, Emma C; Ingle, Suzanne Marie; Muir, Peter; Beck, Charles; Finn, Adam; Leeming, John Peter; Cabral, Christie; Kesten, Joanna May; Hay, Alastair D

    2016-01-01

    Introduction Paediatric respiratory tract infections (RTIs) are common reasons for primary care consultations and antibiotic prescribing. Locally relevant syndromic and microbiological surveillance information has the potential to improve the care of children with RTIs by normalising illness (parents) and reducing uncertainty (clinicians). Currently, most RTI studies are conducted at the point of healthcare service consultation, leaving the community burden, microbiology, symptom duration and proportion consulting largely unknown. This study seeks to establish the feasibility of (mainly online) participant recruitment and retention, and the acceptability/comparability of parent versus nurse-collected microbiological sampling, to inform the design of a future surveillance intervention study. Evidence regarding consultation rates and symptom duration is also sought. Methods and analysis A community-based, feasibility prospective inception cohort study, recruiting children aged ≥3 months and <16 years and their parents via general practitioner surgery invitation letter, aiming to collect data on 300 incident RTIs by July 2016. Following informed consent, parents provide baseline (demographic) data online, and respond to weekly emails to confirm the absence/presence of new RTI symptoms. Once symptomatic, parents provide daily data online (RTI symptoms, school/day-care attendance, time off work, health service use, medication), and a research nurse visits to collect clinical examination data and microbiological (nasal and saliva) swabs. Parents are invited to provide symptomatic (at nurse visit, but without nurse assistance) and asymptomatic (alone) swabs on recovery. A review of primary care medical notes will gather medical history, health service utilisation, referral and antibiotic prescribing rates. Feasibility will be assessed using recruitment and retention rates, data completeness; and acceptability by quantitative survey and qualitative interviews

  15. Out-of-bed extubation: a feasibility study

    PubMed Central

    Dexheimer Neto, Felippe Leopoldo; Vesz, Patrini Silveira; Cremonese, Rafael Viegas; Leães, Clarissa Garcia Soares; Raupp, Ana Carolina Tabajara; Rodrigues, Cristiano dos Santos; de Andrade, Juliana Mara Stormovski; Townsend, Raquel da Silva; Maccari, Juçara Gasparetto; Teixeira, Cassiano

    2014-01-01

    Objective In clinical intensive care practice, weaning from mechanical ventilation is accompanied by concurrent early patient mobilization. The aim of this study was to compare the success of extubation performed with patients seated in an armchair compared to extubation with patients in a supine position. Methods A retrospective study, observational and non-randomized was conducted in a mixed-gender, 23-bed intensive care unit. The primary study outcome was success of extubation, which was defined as the patient tolerating the removal of the endotracheal tube for at least 48 hours. The differences between the study groups were assessed using Student's t-test and chi-squared analysis. Results Ninety-one patients were included from December 2010 and June 2011. The study population had a mean age of 71 years ± 12 months, a mean APACHE II score of 21±7.6, and a mean length of mechanical ventilation of 2.6±2 days. Extubation was performed in 33 patients who were seated in an armchair (36%) and in 58 patients in a supine position (64%). There were no significant differences in age, mean APACHE II score or length of mechanical ventilation between the two groups, and a similar extubation success rate was observed (82%, seated group versus 85%, supine group, p>0.05). Furthermore, no significant differences were found between the two groups in terms of post-extubation distress, need for tracheostomy, duration of mechanical ventilation weaning, or intensive care unit stay. Conclusion Our results suggest that the clinical outcomes of patients extubated in a seated position are similar to those of patients extubated in a supine position. This new practice of seated extubation was not associated with adverse events and allowed extubation to occur simultaneously with early mobilization. PMID:25295820

  16. Feasibility Study of Hydrogen Production at Existing Nuclear Power Plants

    SciTech Connect

    Stephen Schey

    2009-07-01

    Cooperative Agreement DE-FC07-06ID14788 was executed between the U.S. Department of Energy, Electric Transportation Applications, and Idaho National Laboratory to investigate the economics of producing hydrogen by electrolysis using electricity generated by nuclear power. The work under this agreement is divided into the following four tasks: Task 1 – Produce Data and Analyses Task 2 – Economic Analysis of Large-Scale Alkaline Electrolysis Task 3 – Commercial-Scale Hydrogen Production Task 4 – Disseminate Data and Analyses. Reports exist on the prospect that utility companies may benefit from having the option to produce electricity or produce hydrogen, depending on market conditions for both. This study advances that discussion in the affirmative by providing data and suggesting further areas of study. While some reports have identified issues related to licensing hydrogen plants with nuclear plants, this study provides more specifics and could be a resource guide for further study and clarifications. At the same time, this report identifies other area of risks and uncertainties associated with hydrogen production on this scale. Suggestions for further study in some of these topics, including water availability, are included in the report. The goals and objectives of the original project description have been met. Lack of industry design for proton exchange membrane electrolysis hydrogen production facilities of this magnitude was a roadblock for a significant period. However, recent design breakthroughs have made costing this facility much more accurate. In fact, the new design information on proton exchange membrane electrolyzers scaled to the 1 kg of hydrogen per second electrolyzer reduced the model costs from $500 to $100 million. Task 1 was delayed when the original electrolyzer failed at the end of its economic life. However, additional valuable information was obtained when the new electrolyzer was installed. Products developed during this study

  17. Integrating LMINET with TAAM and SIMMOD: A Feasibility Study

    NASA Technical Reports Server (NTRS)

    Long, Dou; Stouffer-Coston, Virginia; Kostiuk, Peter; Kula, Richard; Yackovetsky, Robert (Technical Monitor)

    2001-01-01

    LMINET is a queuing network air traffic simulation model implemented at 64 large airports and the entire National Airspace System in the United States. TAAM and SIMMOD are two widely used air traffic event-driven simulation models mostly for airports. Based on our proposed Progressive Augmented window approach, TAAM and SIMMOD are integrated with LMINET though flight schedules. In the integration, the flight schedules are modified through the flight delays reported by the other models. The benefit to the local simulation study is to let TAAM or SIMMOD take the modified schedule from LMINET, which takes into account of the air traffic congestion and flight delays at the national network level. We demonstrate the value of the integrated models by the case studies at Chicago O'Hare International Airport and Washington Dulles International Airport. Details of the integration are reported and future work for a full-blown integration is identified.

  18. FEASIBILITY STUDY II OF A MUON BASED NEUTRINO SOURCE.

    SciTech Connect

    GALLARDO,J.C.; OZAKI,S.; PALMER,R.B.; ZISMAN,M.

    2001-06-30

    The concept of using a muon storage ring to provide a well characterized beam of muon and electron neutrinos (a Neutrino Factory) has been under study for a number of years now at various laboratories throughout the world. The physics program of a Neutrino Factoryis focused on the relatively unexplored neutrino sector. In conjunction with a detector located a suitable distance from the neutrino source, the facility would make valuable contributions to the study of neutrino masses and lepton mixing. A Neutrino Factory is expected to improve the measurement accuracy of sin{sup 2}(2{theta}{sub 23}) and {Delta}m{sup 2}{sub 32} and provide measurements of sin{sup 2}(2{theta}{sub 13}) and the sign of {Delta}m{sup 2}{sub 32}. It may also be able to measure CP violation in the lepton sector.

  19. Feasibility Study: Ductless Hydronic Distribution Systems with Fan Coil Delivery

    SciTech Connect

    Springer, D.; Dakin, B.; Backman, C.

    2012-07-01

    The primary objectives of this study are to estimate potential energy savings relative to conventional ducted air distribution, and to identify equipment requirements, costs, and barriers with a focus on ductless hydronic delivery systems that utilize water-to-air terminal units in each zone. Results indicate that annual heating and cooling energy use can be reduced by up to 27% assuming replacement of the conventional 13 SEER heat pump and coil with a similarly rated air-to-water heat pump.

  20. Agricultural pest monitoring using fluorescence lidar techniques. Feasibility study

    NASA Astrophysics Data System (ADS)

    Mei, L.; Guan, Z. G.; Zhou, H. J.; Lv, J.; Zhu, Z. R.; Cheng, J. A.; Chen, F. J.; Löfstedt, C.; Svanberg, S.; Somesfalean, G.

    2012-03-01

    The fluorescence of different types of planthopper ( Hemiptera) and moth ( Lepidoptera), which constitute important Chinese agricultural pests, was investigated both in situ in a laboratory setting and remotely using a fluorescence light detection and ranging (lidar) system operating at a range of about 50 m. The natural autofluorescence of different species, as well as the fluorescence from insects that had been dusted with fluorescent dye powder for identification were studied. Autofluorescence spectra of both moths and planthoppers show a maximum intensity peak around 450 nm. Bleaching upon long-time laser illumination was modest and did not affect the shape of the spectrum. A single dyed rice planthopper, a few mm in size, could be detected at 50 m distance by using the fluorescence lidar system. By employing various marking dyes, different types of agricultural pest could be determined. We suggest that lidar may be used in studies of migration and movement of pest insects, including studies of their behavior in the vicinity of pheromone traps and in pheromone-treated fields.

  1. Feasibility study of archaeological structures scanning by muon tomography

    NASA Astrophysics Data System (ADS)

    Gómez, H.; Carloganu, C.; Gibert, D.; Marteau, J.; Niess, V.; Katsanevas, S.; Tonazzo, A.

    2015-08-01

    One of the main concerns in archaeology is to find of a method to study precisely archaeological structures in the least invasive way possible to avoid damage. The requirement of preserving the structures integrity prevents, in the case of pyramids or tumuli, the study of any internal structure (halls or tombs) which are not reachable by existing corridors. One non-invasive method is the muon tomography. By placing a detector which allows to register the muon direction after the structure, it is possible to have an idea of its composition based on the attenuation of the muon flux, which depends on the material length and density that muons have crossed. This technique, alone or together with other exploration techniques as seismic tomography or electrical resistivity tomography, can provide useful information about the internal structure of the archaeological form that can not be obtained by conventional archaeological methods. In this work, the time measurement necessary to obtain a significant result about the composition of an archaeological structure is estimated. To do that, a Monte Carlo simulation framework based on the MUSIC software, properly tuned for this study, has been developed. The particular case of the Kastas Amfipoli Macedonian tumulus has been considered to perform the simulations.

  2. Environmental process improvement feasibility study and demonstration program

    NASA Technical Reports Server (NTRS)

    Martin, Rodger L.

    1994-01-01

    This report is the final product of an environmental study conducted by Western Commercial Space Center, Inc. under contract to Tennessee-Calspan Center for Space Transportation and Applied Research. The purpose of this investigation is to accurately document the current environmental and permitting processes associated with commercial space launch activity at Vandenberg AFB, and make recommendations to streamline those processes. The particular areas of interest focus on: identifying applicable Federal, state, and local laws, Department of Defense directives, and Air force regulations; defining the environmental process on Vandenberg AFB and how it relates with other agencies, including Federal and state regulatory agencies; and defining the air quality permit process. Study investigation results are applied to an example Pilot Space Launch Vehicle (PSLV) planning to launch from Vandenberg AFB. The PSLV space hardware is analyzed with respect to environmental and permitting issues associated with vehicle processing, facilities required (existing or new), and launch. The PSLV verified the earlier findings of the study and gave insight into streamlining recommendations.

  3. Feasibility study of archaeological structures scanning by muon tomography

    SciTech Connect

    Gómez, H.; Katsanevas, S.; Tonazzo, A.; Carloganu, C.; Niess, V.; Gibert, D.; Marteau, J.

    2015-08-17

    One of the main concerns in archaeology is to find of a method to study precisely archaeological structures in the least invasive way possible to avoid damage. The requirement of preserving the structures integrity prevents, in the case of pyramids or tumuli, the study of any internal structure (halls or tombs) which are not reachable by existing corridors. One non-invasive method is the muon tomography. By placing a detector which allows to register the muon direction after the structure, it is possible to have an idea of its composition based on the attenuation of the muon flux, which depends on the material length and density that muons have crossed. This technique, alone or together with other exploration techniques as seismic tomography or electrical resistivity tomography, can provide useful information about the internal structure of the archaeological form that can not be obtained by conventional archaeological methods. In this work, the time measurement necessary to obtain a significant result about the composition of an archaeological structure is estimated. To do that, a Monte Carlo simulation framework based on the MUSIC software, properly tuned for this study, has been developed. The particular case of the Kastas Amfipoli Macedonian tumulus has been considered to perform the simulations.

  4. FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 4: Economic feasibility

    NASA Technical Reports Server (NTRS)

    Mulhall, B. D. L.

    1980-01-01

    The results of the economic analysis of the AIDS 3 system design are presented. AIDS 3 evaluated a set of economic feasibility measures including life cycle cost, implementation cost, annual operating expenditures and annual capital expenditures. The economic feasibility of AIDS 3 was determined by comparing the evaluated measures with the same measures, where applicable, evaluated for the current system. A set of future work load scenarios was constructed using JPL's environmental evaluation study of the fingerprint identification system. AIDS 3 and the current system were evaluated for each of the economic feasibility measures for each of the work load scenarios. They were compared for a set of performance measures, including response time and accuracy, and for a set of cost/benefit ratios, including cost per transaction and cost per technical search. Benefit measures related to the economic feasibility of the system are also presented, including the required number of employees and the required employee skill mix.

  5. A robotic wheelchair trainer: design overview and a feasibility study

    PubMed Central

    2010-01-01

    Background Experiencing independent mobility is important for children with a severe movement disability, but learning to drive a powered wheelchair can be labor intensive, requiring hand-over-hand assistance from a skilled therapist. Methods To improve accessibility to training, we developed a robotic wheelchair trainer that steers itself along a course marked by a line on the floor using computer vision, haptically guiding the driver's hand in appropriate steering motions using a force feedback joystick, as the driver tries to catch a mobile robot in a game of "robot tag". This paper provides a detailed design description of the computer vision and control system. In addition, we present data from a pilot study in which we used the chair to teach children without motor impairment aged 4-9 (n = 22) to drive the wheelchair in a single training session, in order to verify that the wheelchair could enable learning by the non-impaired motor system, and to establish normative values of learning rates. Results and Discussion Training with haptic guidance from the robotic wheelchair trainer improved the steering ability of children without motor impairment significantly more than training without guidance. We also report the results of a case study with one 8-year-old child with a severe motor impairment due to cerebral palsy, who replicated the single-session training protocol that the non-disabled children participated in. This child also improved steering ability after training with guidance from the joystick by an amount even greater than the children without motor impairment. Conclusions The system not only provided a safe, fun context for automating driver's training, but also enhanced motor learning by the non-impaired motor system, presumably by demonstrating through intuitive movement and force of the joystick itself exemplary control to follow the course. The case study indicates that a child with a motor system impaired by CP can also gain a short-term benefit

  6. Deschutes estuary feasibility study: hydrodynamics and sediment transport modeling

    USGS Publications Warehouse

    George, Douglas A.; Gelfenbaum, Guy; Lesser, Giles; Stevens, Andrew W.

    2006-01-01

    - Provide the completed study to the CLAMP Steering Committee so that a recommendation about a long-term aquatic environment of the basin can be made. The hydrodynamic and sediment transport modeling task developed a number of different model simulations using a process-based morphological model, Delft3D, to help address these goals. Modeling results provide a qualitative assessment of estuarine behavior both prior to dam construction and after various post-dam removal scenarios. Quantitative data from the model is used in the companion biological assessment and engineering design components of the overall study. Overall, the modeling study found that after dam removal, tidal and estuarine processes are immediately restored, with marine water from Budd Inlet carried into North and Middle Basin on each rising tide and mud flats being exposed with each falling tide. Within the first year after dam removal, tidal processes, along with the occasional river floods, act to modify the estuary bed by redistributing sediment through erosion and deposition. The morphological response of the bed is rapid during the first couple of years, then slows as a dynamic equilibrium is reached within three to five years. By ten years after dam removal, the overall hydrodynamic and morphologic behavior of the estuary is similar to the pre-dam estuary, with the exception of South Basin, which has been permanently modified by human activities. In addition to a qualitative assessment of estuarine behavior, process-based modeling provides the ability address specific questions to help to inform decision-making. Considering that predicting future conditions of a complex estuarine environment is wrought with uncertainties, quantitative results in this report are often expressed in terms of ranges of possible outcomes.

  7. White phosphorus pits focused feasibility study final July 2007.

    SciTech Connect

    Davis, B.; Martino, L.

    2007-08-21

    The White Phosphorus Burning Pits (WPP) Area of Concern (AOC) is a site of about 5.5 acres (2.2 ha) located in the J-Field Study Area, in the Edgewood Area of Aberdeen Proving Ground (APG), Maryland (Figure 1.1). Considerable information about the WPP exists as a result of efforts to characterize the hazards associated with J-Field. Contamination in the J-Field Study Area was first detected during an environmental survey of the APG Edgewood Area conducted in 1977 and 1978 (Nemeth et al. 1983) by the U.S. Army Toxic and Hazardous Materials Agency (USATHAMA; predecessor to the U.S. Army Environmental Center). As part of a subsequent USATHAMA environmental survey, 11 wells were installed and sampled at J-Field (three of them at the WPP) (Nemeth 1989). Contamination was also detected in 1983 during a munitions disposal survey conducted by Princeton Aqua Science (1984). The Princeton Aqua Science investigation involved installing and sampling nine wells (four at the WPP) and collecting and analyzing surficial and deep composite soil samples (including samples from the WPP area). In 1986, the U.S. Environmental Protection Agency (EPA) issued a Resource Conservation and Recovery Act (RCRA) Permit (MD3-21-002-1355) requiring a post-wide RCRA Facility Assessment (RFA) and a hydrogeologic assessment of J-Field. In 1987, the U.S. Geological Survey (USGS) began a two-phase hydrogeologic assessment in which data were collected to model groundwater flow at J-Field. Soil-gas investigations were conducted, several well clusters were installed (four at the WPP), a groundwater flow model was developed, and groundwater and surface water monitoring programs were established that continue today. The results of the USGS study were published by Hughes (1993).

  8. Feasibility study of the Paidha hydroelectric project. Volume 3: Appendices

    SciTech Connect

    1998-06-30

    This report, conducted by Harza Engineering Company International L.P., was funded by the US Trade and Development Agency. The study concerns the Uganda Electricity Board (UEB) which supplies the West Nile Region of Uganda. The aim of this project is to supply electric power to an area that is currently not serviced by the UEB grid system. This is Volume III, the Appendices, and it consist of the following: (a) geologic and geotechnical; (b) hydrology; (c) cost estimates; (d) project optimization; (e) power market survey; (f) environmental impact statement.

  9. Solar Feasibility Study May 2013 - San Carlos Apache Tribe

    SciTech Connect

    Rapp, Jim; Duncan, Ken; Albert, Steve

    2013-05-01

    The San Carlos Apache Tribe (Tribe) in the interests of strengthening tribal sovereignty, becoming more energy self-sufficient, and providing improved services and economic opportunities to tribal members and San Carlos Apache Reservation (Reservation) residents and businesses, has explored a variety of options for renewable energy development. The development of renewable energy technologies and generation is consistent with the Tribe’s 2011 Strategic Plan. This Study assessed the possibilities for both commercial-scale and community-scale solar development within the southwestern portions of the Reservation around the communities of San Carlos, Peridot, and Cutter, and in the southeastern Reservation around the community of Bylas. Based on the lack of any commercial-scale electric power transmission between the Reservation and the regional transmission grid, Phase 2 of this Study greatly expanded consideration of community-scale options. Three smaller sites (Point of Pines, Dudleyville/Winkleman, and Seneca Lake) were also evaluated for community-scale solar potential. Three building complexes were identified within the Reservation where the development of site-specific facility-scale solar power would be the most beneficial and cost-effective: Apache Gold Casino/Resort, Tribal College/Skill Center, and the Dudleyville (Winkleman) Casino.

  10. A Feasibility Study to Control Airfoil Shape Using THUNDER

    NASA Technical Reports Server (NTRS)

    Pinkerton, Jennifer L.; Moses, Robert W.

    1997-01-01

    The objective of this study was to assess the capabilities of a new out-of-plane displacement piezoelectric actuator called thin-layer composite-unimorph ferroelectric driver and sensor (THUNDER) to alter the upper surface geometry of a subscale airfoil to enhance performance under aerodynamic loading. Sixty test conditions, consisting of combinations of five angles of attack, four dc applied voltages, and three tunnel velocities, were studied in a tabletop wind tunnel. Results indicated that larger magnitudes of applied voltage produced larger wafer displacements. Wind-off displacements were also consistently larger than wind-on. Higher velocities produced larger displacements than lower velocities because of increased upper surface suction. Increased suction also resulted in larger displacements at higher angles of attack. Creep and hysteresis of the wafer, which were identified at each test condition, contributed to larger negative displacements for all negative applied voltages and larger positive displacements for the smaller positive applied voltage (+102 V). An elastic membrane used to hold the wafer to the upper surface hindered displacements at the larger positive applied voltage (+170 V). Both creep and hysteresis appeared bounded based on the analysis of several displacement cycles. These results show that THUNDER can be used to alter the camber of a small airfoil under aerodynamic loads.

  11. Intraarterial Ultrasound in Pancreatic Cancer: Feasibility Study and Preliminary Results

    SciTech Connect

    Larena-Avellaneda, Axel; Timm, Stephan; Kickuth, Ralph; Kenn, Werner; Steger, Ulrich; Jurowich, Christian; Germer, Christoph-Thomas

    2010-08-15

    Despite technological advances in computed tomography (CT) and magnetic resonance imaging, the involvement of the celiac or mesenteric artery in pancreatic cancer remains uncertain in many cases. Infiltration of these vessels is important in making decisions about therapy choices but often can only be definitively determined through laparotomy. Local (intraarterial) ultrasound may increase diagnostic accuracy. Using the Volcano intravascular ultrasound (IVUS) system, we applied a transfemoral method to scan the celiac and mesenteric arteries directly intraarterial. This technique was used in five patients with suspected pancreatic cancer. Technical success was achieved in all cases. In one case, a short dissection of the mesenteric artery occurred but could be managed interventionally. In tumors that did not contact with the vessels, IVUS was unable to display the tissue pathology. Our main interest was the infiltration of the arteries. In one case, infiltration was certain in the CT scan but uncertain in two patients. In the latter two cases, IVUS correctly predicted infiltration in one and freedom from tumor in the other case. In our preliminary study, IVUS correctly predicted arterial infiltration in all cases. IVUS did not provide new information when the tumor was far away from the vessel. Compared with IVUS in the portal vein, the information about the artery is more detailed, and the vessel approach is easier. These results encouraged us to design a prospective study to evaluate the sensitivity and specificity of this method.

  12. Rebuilding the Brookhaven high flux beam reactor: A feasibility study

    SciTech Connect

    Brynda, W.J.; Passell, L.; Rorer, D.C.

    1995-01-01

    After nearly thirty years of operation, Brookhaven`s High Flux Beam Reactor (HFBR) is still one of the world`s premier steady-state neutron sources. A major center for condensed matter studies, it currently supports fifteen separate beamlines conducting research in fields as diverse as crystallography, solid-state, nuclear and surface physics, polymer physics and structural biology and will very likely be able to do so for perhaps another decade. But beyond that point the HFBR will be running on borrowed time. Unless appropriate remedial action is taken, progressive radiation-induced embrittlement problems will eventually shut it down. Recognizing the HFBR`s value as a national scientific resource, members of the Laboratory`s scientific and reactor operations staffs began earlier this year to consider what could be done both to extend its useful life and to assure that it continues to provide state-of-the-art research facilities for the scientific community. This report summarizes the findings of that study. It addresses two basic issues: (i) identification and replacement of lifetime-limiting components and (ii) modifications and additions that could expand and enhance the reactor`s research capabilities.

  13. Space shuttle/food system study. Package feasibility study, modifications 3S, 4C and 5S

    NASA Technical Reports Server (NTRS)

    1974-01-01

    An optimum feeding system for the space shuttle was presented. This system consisted of all rehydratable type foods which were enclosed in a 4 in. x 4 in. x 1 in. flexible package. A feasibility follow-on study was conducted, and two acceptable, feasible prototypes for this package are described.

  14. A hingeless rotor XV-15 design integration feasibility study. Volume 1: Engineering design studies

    NASA Technical Reports Server (NTRS)

    Magee, J. P.; Alexander, H. R.

    1978-01-01

    A design integration feasibility study was carried out to investigate what modifications to the basic XV-15 were necessary to accomplish a flight demonstration of the XV-15 with a Boeing hingeless rotor. Also investigated were additional modifications which would exploit the full capability provided by the combination of the new rotor and the existing T53 engine. An evaluation of the aircraft is presented and the data indicate improved air vehicle performance, acceptable aeroelastic margins, lower noise levels and improved flying qualities compared with the XV-15 aircraft. Inspection of the rotor system data provided shows an essentially unlimited life rotor for the flight spectrum anticipated for the XV-15.

  15. Feasibility study of solar energy in residential electricity generation

    NASA Astrophysics Data System (ADS)

    Solanki, Divyangsinh G.

    With the increasing demand for energy and the concerns about the global environment, along with the steady progress in the field of renewable energy technologies, new opportunities and possibilities are opening up for an efficient utilization of renewable energy sources. Solar energy is undoubtedly the most clean, inexhaustible and abundant source of renewable energy. Photovoltaic (PV) technology is one of the most efficient mean to utilize solar power. The focus of this study was to establish economics of a residential photovoltaic system for a typical home in south Texas. The PV system serves the needs of a typical mid-size home inhibited by a typical family. Assumptions are made for the typical daily energy consumption, and the necessary equipments like solar arrays, batteries, inverter, etc. are sized and evaluated optimally so as to reduce the life cycle cost (LCC) of the system. Calculations are done taking into consideration the economic parameters concerned with the system.

  16. Real-time measurement of mental workload: A feasibility study

    NASA Technical Reports Server (NTRS)

    Kramer, Arthur; Humphrey, Darryl; Sirevaag, Erik; Mecklinger, Axel

    1990-01-01

    The primary goal of the study was to explore the utility of event-related brain potentials (ERP) as real-time measures of workload. To this end, subjects performed two different tasks both separately and together. One task required that subjects monitor a bank of constantly changing gauges and detect critical deviations. Difficulty was varied by changing the predictability of the gauges. The second task was mental arithmetic. Difficulty was varied by requiring subjects to perform operations on either two or three columns of numbers. Two conditions that could easily be distinguished on the basis of performance measures were selected for the real-time evaluation of ERPs. A bootstrapping approach was adopted in which one thousand samples of n trials (n = 1, 3, 5 ...65) were classified using several measures of P300 and Slow Wave amplitude. Classification accuracies of 85 percent were achieved with 25 trials. Results are discussed in terms of potential enhancements for real-time recording.

  17. Reasoning Exercises in Assisted Living (REAL): A Feasibility Study

    PubMed Central

    Williams, Kristine N.

    2013-01-01

    Assisted Living Facility residents are at risk for cognitive decline that precipitates nursing home placement. Cognitive training protects cognition and leads to maintained self-care for community dwelling elders. This pilot study tested an intervention designed to improve reasoning and everyday problem solving for assisted living residents. Volunteers (N= 4) completed the six Reasoning Exercises in Assisted Living training sessions provided over one month. Pre-intervention, immediate post-intervention, and 3 month follow-up assessments of problem solving were compared. Scores on the Everyday Problems for Cognitively Challenged Elderly (EPCCE) increased 20% from pre (M=11.00, SD = 8.83) to post-intervention (M=19.5, SD=8.35), t=−312, p = .05. After three months, subjects showed sustained EPCCE score improvement (M = 21.75, SD = 4.57, t =−3.95, p = .03). PMID:18649208

  18. Compensation for respiratory motion in cardiac PET - A feasibility study

    SciTech Connect

    Budinger, T.F.; Klein, G.J.; Reed, J.H. |

    1996-05-01

    We characterize respiration-induced motion in the canine myocardium and present preliminary efforts to compensate for the motion in gated PET. An anesthetized dog was injected with 23 mCi FDG-18 and placed in a CTI/Siemens ECAT EXACT HR scanner. The animal was mechanically held at peak inspiration and peak expiration positions for alternate eight-second time periods. Data from each eight-second interval were stored separately, resulting in a total of 32 interleaved volume datasets for each study; half of which represented data during peak inspiration, half represented data during peak expiration. Data from each position were summed and separately reconstructed. The above protocol was repeated four times. Ungated transmission data were acquired while the animal was ventilated normally and were used to correct for the effects of attenuation. Images from each reconstruction were aligned using a cross-correlation technique, which gives the rigid-body transformation necessary to register the two volumes. Over the four sets of data a 10.8 {plus_minus} 0.7 mm magnitude translation and a 6.3 {plus_minus} 0.5 degree rotation were required to align the inspiration data with the expiration data. Consistent registration of the gated data allows summing of the data to improve statistics. Obviously, if one sums the images without regard to misregistration, blurring occurs proportional to the amount of movement over the respiratory cycle. The blurring is markedly decreased by first registering the gated datasets in image space, and then summing according to the transformation parameters. Though cardiac gating was not used in this preliminary study, it indicates that rigid body transformation followed by summation can compensate for a large portion of the image degradations due to respiratory motion. Gated acquisition of PET data using respiratory status signals via a pneumatic bellows will allow separate stages of the respiratory cycle to be collected on the ECAT EXACT HR.

  19. Interstitial photodynamic therapy for the prostate: a canine feasibility study

    NASA Astrophysics Data System (ADS)

    Shetty, Sugandh D.; Sirls, Larry T.; Chen, Qun; Hetzel, Fred W.; Cerny, Joseph C.

    1996-05-01

    Prior to a possible clinical application of photodynamic therapy (PDT) for prostatic diseases such as benign prostatic hyperplasia and prostate cancer, optical properties of the prostate gland need to be studied. The specific objectives of this study were (1) to determine the light penetration depth, (2) to document the photosensitizer levels in the prostate, and (3) to document the lesion size after PDT. Sixteen dogs were injected with Photofrin II (1, 3 and 5 mg/kg) 24 hrs prior to laser application. After laparotomy and exposure of prostate, monochromatic light (630 nm, via an argon pumped dye laser) was applied through an isotropic fiber at 100 mw for a total dose of 400 joules. Continuous light fluence and temperature were documented. Prostates were harvested at 1 week and examined histologically for the lesion size. Four sham dogs were treated without Photofrin II. At Photofrin doses of 1, 3 and 5 mg/kg the mean prostatic Photofrin levels were 1.78 plus or minus 0.33, 1.47 plus or minus 0.08 and 1.95 plus or minus 0.44 (mu) gm/ml. The mean light penetration depths were 2.08, 1.37 and 1.64 mm respectively. Photofrin dose escalation (1, 3 and 5 mg/kg) increased the lesion size to radius of 4.1 plus or minus 0.9 mm, 4.4 plus or minus 0.8 mm and 6.3 plus or minus 0.9 mm. There were no lesions seen in sham dogs. These results demonstrate that light penetration in prostate is consistent and therapeutic levels of photosensitizer are achieved in prostatic tissue. Moreover, increasing size of the lesions were documented with dose escalation.

  20. A Comprehensive Feasibility Study of Marine CSEM Using Analytical Calculation

    NASA Astrophysics Data System (ADS)

    Furukawa, T.; Lee, K. H.; Yamane, K.

    2010-12-01

    The main purpose of marine controlled source electromagnetic (CSEM) sounding is to find subsurface resistive reservoir and thus reduce risk before drilling. The CSEM response, usually in the form of electric field, recorded by seafloor receivers along one or several survey lines have been used to detect subsurface resistors and rank prospects initially defined from seismic data. The CSEM forward modeling plays an important role in sensitivity studies, survey design and data interpretation. A number of 3-D modeling techniques has recently been reported, but only 1-D forward modeling provides analytical solutions using numerical integration. Based on EM1D originally developed at Lawrence Berkeley National Laboratory, we made some improvements in the following subjects. First, the accuracy of the solution has been improved especially when the source-receiver separation (offset) is large. The need for better accuracy stems from the fact that the sensitivity requirement in detecting a thin resistive layer in marine CSEM survey, potential indicator of hydrocarbon zone, is on the order of 10-15Volt/m. This is a very small number to deal with requiring highly accurate solutions. Second, transverse isotropy in electrical resistivity has been implemented so that one or more layers can have anisotropy to simulate vertically compressed sedimentary sections. Using such modified code, we investigate the sensitivity of a thin resistive, and/or transversely isotropic, hydrocarbon reservoir to marine CSEM methods. Both the time-domain and the frequency-domain responses are investigated.

  1. The Neptune/Triton Explorer Mission: A Concept Feasibility Study

    NASA Technical Reports Server (NTRS)

    Esper, Jaime

    2003-01-01

    Technological advances over the next 10 to 15 years promise to enable a number of smaller, more capable science missions to the outer planets. With the inception of miniaturized spacecraft for a wide range of applications, both in large clusters around Earth, and for deep space missions, NASA is currently in the process of redefining the way science is being gathered. Technologies such as 3-Dimensional Multi-Chip Modules, Micro-machined Electromechanical Devices, Multi Functional Structures, miniaturized transponders, miniaturized propulsion systems, variable emissivity thermal coatings, and artificial intelligence systems are currently in research and development, and are scheduled to fly (or have flown) in a number of missions. This study will leverage on these and other technologies in the design of a lightweight Neptune orbiter unlike any other that has been proposed to date. The Neptune/Triton Explorer (NExTEP) spacecraft uses solar electric earth gravity assist and aero capture maneuvers to achieve its intended target orbit. Either a Taurus or Delta-class launch vehicle may be used to accomplish the mission.

  2. The Neptune/Triton Explorer mission: A concept feasibility study

    NASA Astrophysics Data System (ADS)

    Esper, Jaime

    2006-10-01

    Technological advances over the next 10 15 years promise to enable a number of smaller, more capable science missions to the outer planets. With the inception of miniaturized spacecraft for a wide range of applications, both in large clusters around Earth, and for deep space missions, NASA is currently in the process of redefining the way science is being gathered. Technologies such as 3-dimensional multi-chip modules, micro-machined electromechanical devices, multi functional structures, miniaturized transponders, miniaturized propulsion systems, variable emissivity thermal coatings, and artificial intelligence systems are currently in research and development, and are scheduled to fly (or have flown) in a number of missions. This study will leverage on these and other technologies in the design of a lightweight Neptune orbiter unlike any other that has been proposed to date. The Neptune/Triton Explorer (NExTEP) spacecraft uses solar electric earth gravity assist and aero capture maneuvers to achieve its intended target orbit. Either a Taurus or Delta-class launch vehicle may be used to accomplish the mission.

  3. The Neptune/Triton Explorer mission: a concept feasibility study

    NASA Astrophysics Data System (ADS)

    Esper, Jaime

    2003-11-01

    Technological advances over the next 10 to 15 years promise to enable a number of smaller, more capable science missions to the outer planets. With the inception of miniaturized spacecraft for a wide range of applications, both in large clusters around Earth, and for deep space missions, NASA is currently in the process of redefining the way science is being gathered. Technologies such as 3-Dimensional Multi- Chip Modules, Micro-machined Electromechanical Devices, Multi Functional Structures, miniaturized transponders, miniaturized propulsion systems, variable emissivity thermal coatings, and artificial intelligence systems are currently in research and development, and are scheduled to fly (or have flown) in a number of missions. This study will leverage on these and other technologies in the design of a lightweight Neptune orbiter unlike any other that has been proposed to date. The Neptune/Triton Explorer (NExTEP) spacecraft uses solar electric earth gravity assist and aero capture maneuvers to achieve its intended target orbit. Either a Taurus or Delta-class launch vehicle may be used to accomplish the mission.

  4. Feasibility study on introduction of petroleum substituting energy for transportation

    NASA Astrophysics Data System (ADS)

    1992-03-01

    Concerning electric cars, methanol cars, and CNG (Compressed Natural Gas) cars, the status of development of each of them is studied, grasps the problems on their wide spread through hearings to users, and makes an estimate of the number of cars which is the target for the spread for the time being on the condition that their performance is on the present level. The development of more efficient electric batteries and motors is anticipated for electric cars. Methanol cars have a problem on traveling performance that travel distance by one battery charge is not more than about (1/2) of the existing cars, as well as technical problems such as the development of diesel type use engines, durability of parts, etc. CNG cars have a problem on travel distance by one battery charge which is not more than about (1/3) of the existing cars and a problem on the space caused by carrying the fuel bomb. The target number of fuel substitution cars for the spread is estimated at 833,000 cars, 14% of all the cars in Japan. As of 1991, the number of fuel substitution cars introduced is about 1,200 cars only. In order to lessen the gap, it is indispensable to prepare the infrastructure, improve performance and reliability of the cars, and reduce the cost.

  5. Feasibility study of three-dimensional holographic interferometry for aerodynamics

    NASA Technical Reports Server (NTRS)

    Craig, J. E.

    1983-01-01

    Laser holographic interferometry was tried as a nonintrusive diagnostic tool for studying unsteady two dimensional flows. A NACA 0012 airfoil was tested, while undergoing dynamic stall, over a range of Mach numbers of 0.3 to 0.5, Reynolds number of 0.5 x 10 to the 6th power to 2 x 10 to the 6th power, and at reduced frequencies of 0.015 to 0.15. It was found that both quantitative and qualitative data could be obtained by the technique. Surface pressures on the airfoil can be measured to within 1% of those measured with orifices and pressure transducers when the flow is attached. Velocity profiles were measured near the wake region, and they compared very well with laser velocimeter data for attached flows. For separated flows with large scale vortices, densities can be measured, but pressures and velocities cannot be deduced with the assumption of constant pressure gradient in the normal direction. The sensitivity of the interferograms was good at a Mach number of 0.4 and a Reynolds number of 4 x 10 to the 6th power/ft; the sensitivity worsened at smaller Mach numbers and Reynolds numbers, and improved at larger ones.

  6. Tracking moving objects with megavoltage portal imaging: A feasibility study

    SciTech Connect

    Meyer, Juergen; Richter, Anne; Baier, Kurt; Wilbert, Juergen; Guckenberger, Matthias; Flentje, Michael

    2006-05-15

    Four different algorithms were investigated with the aim to determine their suitability to track an object in conventional megavoltage portal images. The algorithms considered were the mean of the sum of squared differences (MSSD), mutual information (MI), the correlation ratio (CR), and the correlation coefficient (CC). Simulation studies were carried out with various image series containing a rigid object of interest that was moved along a predefined trajectory. For each of the series the signal-to-noise ratio (SNR) was varied to compare the performance of the algorithms under noisy conditions. For a poor SNR of -6 dB the mean tracking error was 2.4, 6.5, 39.0, and 17.2 pixels for MSSD, CC, CR and MI, respectively, with a standard deviation of 1.9, 12.9, 19.5, and 7.5 pixels, respectively. The size of a pixel was 0.5 mm. These results improved to 1.1, 1.3, 1.3, and 2.0 pixels, respectively, with a standard deviation of 0.6, 0.8, 0.8, and 2.1 pixels, respectively, when a mean filter was applied to the images prior to tracking. The implementation of MSSD into existing in-house software demonstrated that, depending on the search range, it was possible to process between 2 and 15 images/s, making this approach capable of real-time applications. In conclusion, the best geometric tracking accuracy overall was obtained with MSSD, followed by CC, CR, and MI. The simplest and best algorithm, both in terms of geometric accuracy as well as computational cost, was the MSSD algorithm and was therefore the method of choice.

  7. Preliminary Advanced Test Reactor LEU Fuel Conversion Feasibility Study

    SciTech Connect

    G. S. Chang; R. G. Ambrosek

    2005-11-01

    The Advanced Test Reactor (ATR) is a high power density, high neutron flux research reactor operating in the United States. The ATR has large irradiation test volumes located in high flux areas. Powered with highly enriched uranium (HEU), the ATR has a maximum thermal power rating of 250 MWth with a maximum unperturbed thermal neutron flux rating of 1.0 x 1015 n/cm2–s. As a result, the ATR is a representative candidate for assessing the necessary modifications and evaluating the subsequent operating effects associated with low-enriched uranium (LEU) fuel conversion. A detailed plate-by-plate MCNP ATR 1/8th core model was developed for the fuel cycle burnup comparison analysis. Using the current HEU 235U enrichment of 93.0 % as a baseline, an analysis can be performed to determine the LEU uranium density and 235U enrichment required in the fuel meat to yield an equivalent Keff between the HEU core and a LEU core versus effective full power days (EFPD). The MCNP ATR 1/8th core model will be used to optimize the 235U loading in the LEU core, such that the differences in Keff between the HEU and LEU core can be minimized for operation at 150 EFPD with a total core power of 115 MW. The Monte-Carlo with ORIGEN-2 (MCWO) method was used to calculate Keff versus EFPDs. The MCWO-calculated results for the LEU case demonstrated adequate excess reactivity such that the LEU core conversion designer should be able to optimize the 235U content of each fuel plate, so that the Keff and relative radial fission heat flux profile are similar to the reference ATR HEU case. However, to demonstrate that the LEU core fuel cycle performance can meet the Upgraded Final Safety Analysis Report (UFSAR) safety requirements, a further study will be required in order to investigate the detailed radial, axial, and azimuthal heat flux profile variations versus EFPDs.

  8. Adapting a Driving Simulator to Study Pedestrians' Street-Crossing Decisions: A Feasibility Study.

    PubMed

    Jäger, M; Nyffeler, T; Müri, R; Mosimann, U P; Nef, T

    2015-01-01

    The decision when to cross a street safely is a challenging task that poses high demands on perception and cognition. Both can be affected by normal aging, neurodegenerative disorder, and brain injury, and there is an increasing interest in studying street-crossing decisions. In this article, we describe how driving simulators can be modified to study pedestrians' street-crossing decisions. The driving simulator's projection system and the virtual driving environment were used to present street-crossing scenarios to the participants. New sensors were added to measure when the test person starts to cross the street. Outcome measures were feasibility, usability, task performance, and visual exploration behavior, and were measured in 15 younger persons, 15 older persons, and 5 post-stroke patients. The experiments showed that the test is feasible and usable, and the selected difficulty level was appropriate. Significant differences in the number of crashes between young participants and patients (p = .001) as well as between healthy older participants and patients (p = .003) were found. When the approaching vehicle's speed is high, significant differences between younger and older participants were found as well (p = .038). Overall, the new test setup was well accepted, and we demonstrated that driving simulators can be used to study pedestrians' street-crossing decisions.

  9. Adapting a Driving Simulator to Study Pedestrians' Street-Crossing Decisions: A Feasibility Study.

    PubMed

    Jäger, M; Nyffeler, T; Müri, R; Mosimann, U P; Nef, T

    2015-01-01

    The decision when to cross a street safely is a challenging task that poses high demands on perception and cognition. Both can be affected by normal aging, neurodegenerative disorder, and brain injury, and there is an increasing interest in studying street-crossing decisions. In this article, we describe how driving simulators can be modified to study pedestrians' street-crossing decisions. The driving simulator's projection system and the virtual driving environment were used to present street-crossing scenarios to the participants. New sensors were added to measure when the test person starts to cross the street. Outcome measures were feasibility, usability, task performance, and visual exploration behavior, and were measured in 15 younger persons, 15 older persons, and 5 post-stroke patients. The experiments showed that the test is feasible and usable, and the selected difficulty level was appropriate. Significant differences in the number of crashes between young participants and patients (p = .001) as well as between healthy older participants and patients (p = .003) were found. When the approaching vehicle's speed is high, significant differences between younger and older participants were found as well (p = .038). Overall, the new test setup was well accepted, and we demonstrated that driving simulators can be used to study pedestrians' street-crossing decisions. PMID:26132219

  10. Feasibility study for La Paz Hydroelectric Power Plant Project. Export trade information

    SciTech Connect

    Not Available

    1991-12-01

    A feasibility study for a hydroelectric project is defined as an investigation whose purpose is to determine whether any reasonable acceptable design for a project is technically viable. Alternatives of site development are studied and various solutions for civil works and equipment sizing are evaluated. When alternatives are considered technically viable they are then evaluated for financial viability. The purpose of the study is to evaluate the viability of the La Paz Hydroelectric Project. The La Paz Feasibility Study discusses: Site Characteristics and Existing Facilities; Hydrology and Sedimentation; Alternatives and Development; Hydraulics; Project Energy Output; Environmental, Social and Institutional Impacts; Project Cost Analysis; Market Considerations; Economics; Financial Analysis; and Project Implementation.

  11. FEASIBILITY STUDY OF CLIMATE CHANGE IMPACTS ON NITROGEN IN CAPE COD EMBAYMENTS

    EPA Science Inventory

    The objective of this study is to explore the feasibility of studying potential effects of climate change on impairments resulting from nitrogen loadings in the salt water embayments of Cape Cod. The report includes a recommended plan for studying these impacts, an estimate of t...

  12. Evaluation for coastal reclamation feasibility using a comprehensive hydrodynamic framework: A case study in Haizhou Bay.

    PubMed

    Feng, Lan; He, Jia; Ai, Junyong; Sun, Xiang; Bian, Fangyuan; Zhu, Xiaodong

    2015-11-15

    Coastal reclamation (CR) is a prevailing approach to solve the contradiction between the land shortage and the growing demand of living space for human beings. In general, environmental impact assessment (EIA) focuses on evaluating the feasibility of individual coastal reclamation project (CRP). However, few studies have investigated the cumulative effect of multiple CRPs on surrounding environment. In this study, an integrated framework based on coastal hydrodynamics was established, and then applied to the feasibility evaluation of multiple CRPs for future coastal management in Haizhou Bay, China. The results indicated that three out of five reclamation projects were feasible and the remaining two were forbidden in the study area, whereas EIA approves of all the CRPs. It provides a scientific reference for effective management of coastal reclamation and future environmental impact researches when new CRPs are proposed.

  13. Evaluation for coastal reclamation feasibility using a comprehensive hydrodynamic framework: A case study in Haizhou Bay.

    PubMed

    Feng, Lan; He, Jia; Ai, Junyong; Sun, Xiang; Bian, Fangyuan; Zhu, Xiaodong

    2015-11-15

    Coastal reclamation (CR) is a prevailing approach to solve the contradiction between the land shortage and the growing demand of living space for human beings. In general, environmental impact assessment (EIA) focuses on evaluating the feasibility of individual coastal reclamation project (CRP). However, few studies have investigated the cumulative effect of multiple CRPs on surrounding environment. In this study, an integrated framework based on coastal hydrodynamics was established, and then applied to the feasibility evaluation of multiple CRPs for future coastal management in Haizhou Bay, China. The results indicated that three out of five reclamation projects were feasible and the remaining two were forbidden in the study area, whereas EIA approves of all the CRPs. It provides a scientific reference for effective management of coastal reclamation and future environmental impact researches when new CRPs are proposed. PMID:26364204

  14. MODAS. Feasibility Study for Implementation of V-TECS Occupational Data Analysis System (ODAS).

    ERIC Educational Resources Information Center

    Illinois State Occupational Information Coordinating Committee, Springfield.

    This feasibility study was conducted to determine if the Michigan Occupational Data Analysis System (MODAS) can be implemented or modified in Illinois by studying the information needs of state agencies and local educational institutions. Agencies were asked how they might use the MODAS system for activities such as curriculum development and…

  15. Junior College District Feasibility Study for the Lewis and Clark Educational Foundation.

    ERIC Educational Resources Information Center

    Southern Illinois Univ., Edwardsville. Div. of Education.

    This report is a model of an extensive feasibility study for the establishment of a 4-county junior college district. It covers all aspects of organizing and pursuing the study. From questionnaires and census data, the committees compiled demographic information on the area and on the educational needs of adults, business, and industry. The survey…

  16. A feasibility study of wearable activity monitors for pre-adolescent school-age children

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Understanding physical activity is the key to fighting childhood obesity. The objective of this study was to examine the feasibility of using certian wearable devices to measure physical activity among children. A qualitative study was conducted with 25 children aged 7 to 10 yearsto assess acceptabi...

  17. A feasibility study of wearable activity monitors for pre-adolescent school-aged children

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Understanding physical activity is key in the fight against childhood obesity. The objective of this study was to examine the feasibility of using certain wearable devices to measure physical activity among children. A qualitative study was conducted with 25 children aged 7 to 10 years to assess ac...

  18. Wolf Run hydroelectric feasibility study, Wolf Run Irrigation Co-op, Inc. , Dufur, Oregon. Final report

    SciTech Connect

    Not Available

    1981-07-01

    This report gives the findings of a study for the Wolf Run Irrigation Co-op on the feasibility of installing hydroelectric units on the existing open ditch irrigation system. The possibility of converting the open ditch system to a closed pressurized sprinkler system was also studied.

  19. Effects of an Internet-Based Voucher Reinforcement Program for Smoking Abstinence: A Feasibility Study

    ERIC Educational Resources Information Center

    Dallery, Jesse; Glenn, Irene M.

    2005-01-01

    The present study tested the feasibility of an Internet-based method to obtain objective evidence of smoking abstinence and to deliver vouchers for evidence of abstinence. Four heavy smokers participated in this 4-week study. Twice daily, participants made video recordings of themselves providing a breath carbon monoxide (CO) sample with a Web…

  20. 78 FR 60291 - Investigational Device Exemptions for Early Feasibility Medical Device Clinical Studies...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-01

    ... comprehensive tutorial on best clinical practices for investigational medical device studies. Concurrent with the publication of this guidance in draft, November 10, 2011 (76 FR 70150), FDA initiated a pilot program for early feasibility study IDE applications (November 10, 2011, 76 FR 70152) to...

  1. Assessing neuropsychological performance in a migrant farm working Colonia in Baja California, Mexico: a feasibility study.

    PubMed

    Bousman, Chad A; Salgado, Hugo; Hendrix, Terence; Fraga, Miguel; Cherner, Mariana

    2011-08-01

    Neuropsychological impairments (NPI) can lead to difficulties in daily functioning and ultimately contribute to poor health outcomes. However, evidence for the feasibility of NPI assessment in resource-limited settings using tests developed in high literacy/high education cultures is sparse. The main objectives were to: (1) determine the feasibility and appropriateness of conducting neuropsychological assessments among a migrant farm worker population in Baja California, Mexico and (2) preliminary describe neuropsychological test performance in this unique population. A neuropsychological test battery was administered to 21 presumably healthy adults (8 men, 13 women) during a two-day international health services and research collaboration. All but one neuropsychological test (i.e. figure learning) was feasible and appropriate to administer to the study population. Contrary to expectations, participants performed better on verbal rather than nonverbal neuropsychological tests. Results support inclusion of neuropsychological tests into future studies among migrant farm worker populations in Baja California, Mexico. PMID:21264515

  2. A pilot feasibility study of a peer-led mindfulness program for medical students

    PubMed Central

    Danilewitz, Marlon; Bradwejn, Jacques; Koszycki, Diana

    2016-01-01

    Background Mindfulness meditation has gained momentum in medical circles for bolstering wellbeing and other facets of professionalism. This study evaluated the feasibility and benefits of a peer-led mindfulness meditation program (MMP) on medical student wellness and professionalism. Method Pre-clerkship students were recruited and randomized to the 8-week MMP or wait-list. Feasibility outcomes included ease of recruitment, program attendance and homework compliance. Other outcomes included self-reported psychological distress, empathy, self-compassion, mindfulness, altruism and program satisfaction. Results The MMP decreased levels of stress and enhanced mindfulness, self-compassion and altruism from baseline to post-study. Changes were not significant for the wait-list condition. Although satisfaction with the MMP was high compliance was suboptimal. Conclusions A peer-led MMP is feasible and may be a promising approach to enhance medical student wellbeing. Further research is needed to explore strategies to improve program compliance in this student population. PMID:27103950

  3. Conducting Real-Time Videofluoroscopic Swallow Study via Telepractice: A Preliminary Feasibility and Reliability Study.

    PubMed

    Burns, Clare L; Ward, Elizabeth C; Hill, Anne J; Phillips, Nick; Porter, Linda

    2016-06-01

    A small number of studies have examined the feasibility of conducting videofluoroscopic swallow studies (VFSS) via telepractice. While the results have confirmed this potential, the systems tested to date have either reported issues that impacted the ability to analyze/interpret the VFSS recordings in real time, or they were not designed to enable real-time interpretation. Further system design is needed to establish a telepractice model that enables the VFSS assessment to be both guided and interpreted live in real time. The aim of this study was to test the feasibility and reliability of using a telepractice system to enable live VFSS assessment. Twenty adult patients underwent a VFSS assessment directed by a telepractice SLP with competency in VFSS located in another room of the hospital. The telepractice clinician led the sessions using a C20 Cisco TelePresence System. This was linked in real time via a secure telehealth network (at 4 megabits per second (Mbit/s)) to a C60 Cisco TelePresence System located in a fluoroscopy suite, connected to the digital fluoroscopy system. Levels of agreement were calculated between the telepractice clinician and a face-to-face clinician who simultaneously rated the VFSS in real time. High levels of agreement for swallowing parameters (range = 75-100 %; k = -0.34 to 1.0) and management decisions (range = 70-100 %, k = 0.64-1.0) were found. A post-session questionnaire revealed clinicians agreed that the telepractice system enabled successful remote assessment of VFSS. The findings support the potential to conduct live VFSS assessment via a telepractice model. PMID:26979971

  4. Connecting the person with dementia and family: a feasibility study of a telepresence robot

    PubMed Central

    2014-01-01

    Background Maintenance of communication is important for people with dementia living in long-term care. The purpose of this study was to assess the feasibility of using “Giraff”, a telepresence robot to enhance engagement between family and a person with dementia living in long-term care. Methods A mixed-methods approach involving semi-structured interviews, call records and video observational data was used. Five people with dementia and their family member participated in a discussion via the Giraff robot for a minimum of six times over a six-week period. A feasibility framework was used to assess feasibility and included video analysis of emotional response and engagement. Results Twenty-six calls with an average duration of 23 mins took place. Residents showed a general state of positive emotions across the calls with a high level of engagement and a minimal level of negative emotions. Participants enjoyed the experience and families reported that the Giraff robot offered the opportunity to reduce social isolation. A number of software and hardware challenges were encountered. Conclusions Participants perceived this novel approach to engage families and people with dementia as a feasible option. Participants were observed and also reported to enjoy the experience. The technical challenges identified have been improved in a newer version of the robot. Future research should include a feasibility trial of longer duration, with a larger sample and a cost analysis. PMID:24456417

  5. The feasibility and acceptability of conducting a trial of specialist medical care and the Lightning Process in children with chronic fatigue syndrome: feasibility randomized controlled trial (SMILE study)

    PubMed Central

    2013-01-01

    Background Chronic fatigue syndrome (CFS) or myalgic encephalomyelitis (ME) is relatively common in children with limited evidence for treatment. The Phil Parker Lightning Process (LP) is a trademarked intervention, which >250 children use annually. There are no reported studies investigating the effectiveness or possible side effects of LP. Methods The trial population was drawn from the Bath and Bristol NHS specialist paediatric CFS or ME service. The study was designed as a pilot randomized trial with children (aged 12 to 18 years) comparing specialist medical care with specialist medical care plus the Lightning Process. Integrated qualitative methodology was used to explore the feasibility and acceptability of the recruitment, randomization and interventions. Results A total of 56 children were recruited from 156 eligible children (1 October 2010 to 16 June 2012). Recruitment, randomization and both interventions were feasible and acceptable. Participants suggested changes to improve feasibility and acceptability and we incorporated the following in the trial protocol: stopped collecting 6-week outcomes; introduced a second reminder letter; used phone calls to collect primary outcomes from nonresponders; informed participants about different approaches of each intervention and changed our recommendation for the primary outcome for the full study from school attendance to disability (SF-36 physical function subscale) and fatigue (Chalder Fatigue Scale). Conclusions Conducting randomized controlled trials (RCTs) to investigate an alternative treatment such as LP is feasible and acceptable for children with CFS or ME. Feasibility studies that incorporate qualitative methodology enable changes to be made to trial protocols to improve acceptability to participants. This is likely to improve recruitment rate and trial retention. Trial registration Feasibility study first randomization: 29 September 2010. Trial registration: Current Controlled Trials ISRCTN81456207

  6. Asynchronous Telepsychiatry in Maharashtra, India: Study of Feasibility and Referral Pattern

    PubMed Central

    Balasinorwala, Vanshree Patil; Shah, Nilesh B.; Chatterjee, Soumya D.; Kale, Vinayak P.; Matcheswalla, Yusuf A.

    2014-01-01

    Context: There is a paucity of published telepsychiatry results in India. Aims: This study was conducted to assess the feasibility of asynchronous telepsychiatry and to study the referral patterns. Settings and Design: This study was conducted in the telemedicine unit of a tertiary care center and design was retrospective analysis of 94 cases, which were diagnosed and treated by telepsychiatry. Materials and Methods: All 94 patients who were referred between January 2007 and August 2013 for telepsychiatry consultations were retrospectively analyzed to assess the referral pattern and feasibility. Statistical Analysis Used: Comparisons between demographic parameters and psychiatric diagnosis was done using Chi-square test. Results: In 89 out of 94 (95%) patients it was possible to make a definitive diagnosis and recommend appropriate treatment only on the basis of data received from the primary care physician by telepsychiatry. This indicates the feasibility of telepsychiatry. The most common problems for which referrals were made included schizophrenia and other psychotic disorders, mood disorders and substance related disorders. Conclusions: This study demonstrates the feasibility of Asynchronous telepsychiatry. Additional Indian studies should be conducted to build the evidence base for the best use of asynchronous telepsychiatry. PMID:25035555

  7. Geothermal Direct Use Feasibility Study on the Fort Bidwell Indian Reservation

    SciTech Connect

    Dale Merrick

    2007-04-20

    The Fort Bidwell Indian Reservation (FBIR) is rich in renewable energy resources. Development of its geothermal resources has the potential to profoundly affect the energy and economic future of the FBIC. Geothermal energy can contribute to making the reservation energy self-sufficient and, potentially, an energy exporter. The feasibility study assessed the feasibility of installing a geothermal district heating system to provide low-cost, efficient heating of existing and planned residences, community buildings and water, using an existing geothermal well, FB-3.

  8. Feasibility studies for the Sonic Sensor System for noninvasive temperature measurement in the food processing industry

    SciTech Connect

    Beller, L.S.; Mikesell, C.R.; Taylor, S.C.; Tow, D.M.

    1991-09-01

    Feasibility studies for development of the Sonic Sensor System to measure temperature in the interior of particulates during food processing are described. The method involves tomography-based acquisition and interpretation of speed of sound data. The method is found to be feasible, and representative engineering problems and other technical issues are identified. A two-step approach to concept commercialization, involving replacement of the present puncture-and-thermometer method is conventional batch processing and development of a device to use in continuous aseptic processing, is proposed. A conservative estimate of immediate energy savings, just for food processing, is 0.01 quad/y. Potential follow-on applications are discussed.

  9. Feasibility study of enhanced oil recovery for fields in decline. Export trade information (Final)

    SciTech Connect

    Not Available

    1991-08-01

    The report, generated by Scientific Software-Intercomp, Inc. for Yacimientos Petroliferos Fiscales Bolivianos, documents the results of a feasibility study which addressed the viability of developing petroleum areas in Bolivia. The primary objective of the project was to describe the reservoirs that have been discovered and their reserves, describe which would be the best alternatives for development of these reservoirs, and to determine the best alternatives for development of all the reserves together. The report, volume 4 of 4, concerns the feasibility of enhancing the oil or condensate recovery from a chosen group of fields (Yapacani, Humberto Suarez Roca, Vibora, La Pena, San Roque, and Camiri).

  10. Feasibility study for development of a thermal management system for electric vehicles (REHP2)

    SciTech Connect

    Bilodeau, S.; Brousseau, P.

    1998-12-31

    Presents a feasibility study for a comprehensive project to develop an innovative thermal management system for electric vehicles operating in cold climates. The system was designed to minimize energy expenditure on cab comfort while maintaining the capacity of the vehicle`s electric accumulators. The system integrates various leading edge technologies, including a compact heat generator, a desiccant-based drying system, a high performance heat pump, and latent heat storage. The main existing technologies and technological constraints on system design are reviewed, and preliminary system design parameters are presented. Finally, a project validation is described which includes specifications, cost estimates, and assessment of the system`s technical and economic feasibility.

  11. Economic feasibility of solar thermal industrial applications and selected case studies

    NASA Astrophysics Data System (ADS)

    Montelione, A.; Boyd, D.; Branz, M.

    1981-12-01

    The economic feasibility is assessed of utilizing solar energy to augment an existing fossil fuel system to generate industrial process heat. Several case studies in the textile and food processing industries in the southern United States were analyzed. Sensitivity analyses were performed, and comparisons illustrating the effects of the Economic Recovery Tax Act of 1981 were made. The economic desirability of the proposed solar systems varied with the type of system selected, location of the facility, state tax credits, and type of fuel displaced. For those systems presently not economical, the projected time to economic feasibility was ascertained.

  12. The working alliance in pediatric chronic disease management: a pilot study of instrument reliability and feasibility.

    PubMed

    Ely, Beth; Alexander, Leslie B; Reed, Monica

    2005-06-01

    Findings are presented from a pilot study to determine the reliability, relevance, and feasibility of child and adult versions of the Working Alliance Inventory, adapted from psychotherapy research for use in the management of chronic childhood hematologic disorders. Thirty-four children, 13 adolescents, 43 parent/guardians, and 4 health-care providers participated. The adapted scales, called the Working Alliance Inventories for Chronic Care, had strong internal consistencies for all versions; retest reliabilities were generally acceptable. The instruments were feasible to use and understandable for children 9 years and older, parent/guardians, and health-care professionals. Recommendations for additional research, using this promising group of alliance instruments, are provided.

  13. A Feasibility Study of Synthesizing Subsurfaces Modeled with Computational Neural Networks

    NASA Technical Reports Server (NTRS)

    Wang, John T.; Housner, Jerrold M.; Szewczyk, Z. Peter

    1998-01-01

    This paper investigates the feasibility of synthesizing substructures modeled with computational neural networks. Substructures are modeled individually with computational neural networks and the response of the assembled structure is predicted by synthesizing the neural networks. A superposition approach is applied to synthesize models for statically determinate substructures while an interface displacement collocation approach is used to synthesize statically indeterminate substructure models. Beam and plate substructures along with components of a complicated Next Generation Space Telescope (NGST) model are used in this feasibility study. In this paper, the limitations and difficulties of synthesizing substructures modeled with neural networks are also discussed.

  14. Integrating Mailed Personalized Feedback and Alcohol Screening Events: A Feasibility Study

    ERIC Educational Resources Information Center

    Benson, Trisha A.; Ambrose, Carrie; Mulfinger, Amanda M. M.; Correia, Christopher J.

    2004-01-01

    This study characterized a sample of college students attending National Alcohol Screening Day (NASD), and tested the feasibility of using NASD as a platform for initiating the delivery of mailed personalized feedback forms. Participants (N = 153, 65% female) attended NASD and completed the Alcohol Use Disorders Identification Test (AUDIT [1]). A…

  15. 43 CFR 404.18 - How can I request assistance to conduct a feasibility study?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false How can I request assistance to conduct a feasibility study? 404.18 Section 404.18 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR RECLAMATION RURAL WATER SUPPLY PROGRAM Overview § 404.18 How can...

  16. Keep Your Brain Fit! A Psychoeducational Training Program for Healthy Cognitive Aging: A Feasibility Study

    ERIC Educational Resources Information Center

    Reijnders, Jennifer; van Heugten, Caroline; van Boxtel, Martin

    2015-01-01

    A psychoeducational face-to-face training program (Keep Your Brain Fit!) was developed to support the working population in coping with age-related cognitive changes and taking proactive preventive measures to maintain cognitive health. A feasibility study was conducted to test the training program presented in a workshop format. Participants…

  17. A Feasibility Study of Using ICT in Iranian Secondary Schools: The Case of Tehran Province

    ERIC Educational Resources Information Center

    Fathi Vajargah, Kourosh; Saadattlab, Ayat

    2014-01-01

    This research presents the results of a feasibility assessment on implementing ICT in Tehran high schools. Mixed method research (both qualitative and quantitative) was employed and due to the nature of research, data collection included two stages: library and field study. Using the cluster method with 362 subjects, data was collected using a…

  18. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Data requirements for feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 5-CENTRALIZED SERVICES...

  19. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 2 2013-07-01 2012-07-01 true Data requirements for feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 5-CENTRALIZED SERVICES IN FEDERAL BUILDINGS AND COMPLEXES...

  20. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 2 2014-07-01 2012-07-01 true Data requirements for feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 5-CENTRALIZED SERVICES...

  1. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 2 2012-07-01 2012-07-01 false Data requirements for feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 5-CENTRALIZED SERVICES...

  2. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true Data requirements for feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 5-CENTRALIZED SERVICES IN FEDERAL BUILDINGS AND COMPLEXES...

  3. A Community College in the North San Fernando Valley. A Feasibility Study.

    ERIC Educational Resources Information Center

    Los Angeles Community Coll. District, CA.

    A feasibility study conducted to examine the proposition of a new community college in the North San Fernando Valley is reported. Following a summary, recommendations, and introduction, findings are discussed as related to the following: Demography, Questionnaire Results, Advisory Committees, Community Participation, Current Enrollment,…

  4. A Feasibility Study of the "Cultural-Educational Park" for Chicago.

    ERIC Educational Resources Information Center

    Leu, Donald J.; Candoli, I. Carl

    A report of a study conducted for the Chicago Public School System on the feasibility of the cultural-educational park answering the educational needs of the community. The concept is defined and its historical development traced, its advantages, disadvantages and evaluative criteria are noted, and finally, specific recommendations are made. A…

  5. Feasibility Study for Paravetic Competency Development of Vocational Agriculture Teachers. Final Report.

    ERIC Educational Resources Information Center

    Evans, Donald E.

    A study was conducted to determine the feasibility of an animal health (paravetical) competency development inservice program for vocational agriculture teachers in Pennsylvania. Objectives were to identify the paravetic (paraveterinary medical) competencies needed by vocational agriculture teachers to teach high school students and adults via…

  6. 76 FR 70152 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-10

    ..., which are outlined in the early feasibility study draft guidance. The information learned and... based on a thorough device evaluation strategy that describes the device and procedure-related... mitigation strategies must also be identified. This policy is intended to facilitate initiation of...

  7. Waste Management Plan for the Oak Ridge National Remedial Investigation/Feasibility Study

    SciTech Connect

    Not Available

    1988-04-01

    In accordance with the requirements of the Remedial Investigation/Feasibility Study (RI/FS) Project Quality Assurance Plan, this Waste Management Plan establishes clear lines of responsibility and authority, documentation requirements, and operational guidance for the collection, identification, segregation, classification, packaging, certification, and storage/disposal of wastes. These subjects are discussed in the subsequent sections of this document.

  8. Design Concepts for a Measure of Effectiveness in Reading: A Feasibility Study.

    ERIC Educational Resources Information Center

    Riverside Research Inst., New York, NY.

    This feasibility study for developing a measure of effectiveness in reading contains five sections. "The Need and Requirements for a Measure of Effectiveness in Reading" presents the problem, functional specifications for a measure of effectiveness in reading, the minimum number of tasks required to uild an effectiveness measure, approaches to the…

  9. A Feasibility Study of Task-Based Teaching of College English Writing in Chinese EFL Context

    ERIC Educational Resources Information Center

    Cao, Linying

    2012-01-01

    In this study the author draws on Jane Willis' TBL framework and examines its effects on the improvement of EFL learners' writing competence when such a framework is applied to college writing classrooms in Chinese EFL settings, and thus tentatively explores the feasibility of the task-based approach to the teaching of EFL writing. Results of this…

  10. 76 FR 71601 - Record of Decision, Long Walk National Historic Trail Feasibility Study/Abbreviated Final...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-18

    ... National Park Service Record of Decision, Long Walk National Historic Trail Feasibility Study/Abbreviated Final Environmental Impact Statement, National Trails Intermountain Region, NM AGENCY: National Park... the National Environmental Policy Act of 1969, 42 U.S.C. 4332(2)(C), the National Park...

  11. Assessing the Feasibility of Performing an Air Accountability Study in New Haven, CT

    EPA Science Inventory

    The main objective of this EPA study was to examine the feasibility of conducting a local (e.g., city level) assessment of the public health impacts of cumulative air pollution reduction activities (a.k.a. accountability) from the federal, state, local and voluntary actions in t...

  12. A Stuttering Education and Bullying Awareness and Prevention Resource: A Feasibility Study

    ERIC Educational Resources Information Center

    Langevin, Marilyn; Prasad, N. G. Narasimha

    2012-01-01

    Purpose: This pretest-posttest study examined the feasibility of using a curriculum-level stuttering education and bullying awareness and prevention program to improve peer attitudes toward children who stutter and attitudes toward bullying. Knowledge about potential responses to bullying and students' liking of the program also were examined.…

  13. Cle Elum Lake Anadromous Salmon Restoration Feasibility Study: Summary of Research, 1986-1999 Progress Report.

    SciTech Connect

    Dey, Douglas

    2000-04-01

    The focus of this research was to study the feasibility for anadromous salmonids to recolonize the habitat above reservoirs in the Yakima River without disruption to irrigation withdrawals. A primary concern was whether anadromous fish could successfully exit reservoirs and survive downstream passage through the Yakima and Columbia Rivers to the ocean.

  14. Feasibility Study for Hotel/Motel Career Program for Harper College. Volume XIX, No. 1.

    ERIC Educational Resources Information Center

    Lucas, John A.; And Others

    In spring 1990, a study was conducted at William Rainey Harper College (WRHC) to determine the feasibility of adding a career program in Hotel/Motel Management (HMM) to the current Food Service Program. Surveys were sent to 53 hotels and motels in the WRHC service area to determine employment demands that would affect the hiring of graduates of…

  15. Determining the Cost of Instruction in California Public Higher Education: A Feasibility Study of Alternative Methods.

    ERIC Educational Resources Information Center

    California State Postsecondary Education Commission, Sacramento.

    A feasibility study conducted by the California Postsecondary Education Commission to evaluate alternative means of developing cost-of-instruction data is presented. Five areas of legislative interest in cost-of-instruction information are identified, and issues pertaining to the comparability of cost data and to the accuracy of the data in…

  16. A Feasibility Study for Consolidating and/or Coordinating Technical Procedures in Beaver County Pennsylvania Libraries.

    ERIC Educational Resources Information Center

    Fry, James W.

    In 1977 the Public Library Commission, in conjunction with the State Library of Pennsylvania, received a Library Services and Construction Act, Title III Grant to conduct a feasibility study of technical service operations in various types of libraries within Beaver County. Its objectives were to: (1) analyze existing library materials purchasing…

  17. A Feasibility Study for Mobile Marketing and Distribution Occupational Laboratories in North Dakota.

    ERIC Educational Resources Information Center

    Kohns, Donald P.

    A study determined the feasibility of a mobile laboratory for marketing and distribution in North Dakota. It attempted to answer four questions: (1) What types of staffing, equipment, curriculum, and delivery systems are presently being utilized in mobile laboratories throughout the nation? (2) What significant information obtained from mobile…

  18. Alum Rock Union Elementary School District Voucher Feasibility Study. Final Report.

    ERIC Educational Resources Information Center

    Glovinsky, Sanford J.

    This report presents a chronology of events and activities which were part of the study aimed at determining the feasibility of the Alum Rock Union Elementary School District as a potential site for a voucher demonstration. In the summer of 1970, the Office of Economic Opportunity issued a general nationwide request for proposals from interested…

  19. Summary of some feasibility studies for site-specific solar industrial process heat

    SciTech Connect

    1982-01-01

    Some feasibility studies for several different site specific solar industrial process heat applications are summarized. The followng applications are examined. Leather Tanning; Concrete Production: Lumber and Paper Processing; Milk Processing; Molding, Curing or Drying; Automobile Manufacture; and Food Processing and Preparation. For each application, site and process data, system design, and performance and cost estimates are summarized.

  20. Representative Sampling of Maritally Violent and Nonviolent Couples: A Feasibility Study

    ERIC Educational Resources Information Center

    Farris, Coreen; Holtzworth-Munroe, Amy

    2007-01-01

    Despite the methodological advantages of representative sampling, few researchers in the field of marital violence have employed random samples for laboratory assessments of couples. The current study tests the feasibility and sampling success of three recruitment methods: (a) random digit dialing, (b) directory-assisted recruitment, and (c) a…

  1. A SERIALS DATA PROGRAM FOR SCIENCE AND TECHNOLOGY, RESULTS OF A FEASIBILITY STUDY. FINAL REPORT.

    ERIC Educational Resources Information Center

    CREAGER, WILLIAM A.; SPARKS, DAVID E.

    THIS REPORT PRESENTS THE RESULTS OF A STUDY OF THE FEASIBILITY OF ESTABLISHING A CONTINUING NATIONAL INVENTORY OF THE WORLD'S SCIENTIFIC AND TECHNICAL SERIALS. THE MAJOR TECHNICAL, OPERATIONAL, AND ECONOMIC FACTORS INVOLVED IN THE IMPLEMENTATION AND OPERATION OF SUCH A SERIALS DATA PROGRAM HAVE BEEN EXAMINED. THE BASIC PARAMETERS OF A SERIALS DATA…

  2. A Feasibility Study of a Computer-Based Manpower Information System for the Construction Industry.

    ERIC Educational Resources Information Center

    Markowitz, Edward A.; And Others

    The result of a Presidential directive, this study was conducted to determine the feasibility and means for implementing a computer-assisted labor market information system designed to improve information flow in and about the construction industry. Data were collected by means of: (1) extensive research reviews, (2) contact with selected…

  3. Phase Two Feasibility Study for Software Safety Requirements Analysis Using Model Checking

    NASA Technical Reports Server (NTRS)

    Turgeon, Gregory; Price, Petra

    2010-01-01

    A feasibility study was performed on a representative aerospace system to determine the following: (1) the benefits and limitations to using SCADE , a commercially available tool for model checking, in comparison to using a proprietary tool that was studied previously [1] and (2) metrics for performing the model checking and for assessing the findings. This study was performed independently of the development task by a group unfamiliar with the system, providing a fresh, external perspective free from development bias.

  4. Feasibility of AmbulanCe-Based Telemedicine (FACT) Study: Safety, Feasibility and Reliability of Third Generation In-Ambulance Telemedicine

    PubMed Central

    Yperzeele, Laetitia; Van Hooff, Robbert-Jan; De Smedt, Ann; Valenzuela Espinoza, Alexis; Van Dyck, Rita; Van de Casseye, Rohny; Convents, Andre; Hubloue, Ives; Lauwaert, Door; De Keyser, Jacques; Brouns, Raf

    2014-01-01

    Background Telemedicine is currently mainly applied as an in-hospital service, but this technology also holds potential to improve emergency care in the prehospital arena. We report on the safety, feasibility and reliability of in-ambulance teleconsultation using a telemedicine system of the third generation. Methods A routine ambulance was equipped with a system for real-time bidirectional audio-video communication, automated transmission of vital parameters, glycemia and electronic patient identification. All patients ( ≥18 years) transported during emergency missions by a Prehospital Intervention Team of the Universitair Ziekenhuis Brussel were eligible for inclusion. To guarantee mobility and to facilitate 24/7 availability, the teleconsultants used lightweight laptop computers to access a dedicated telemedicine platform, which also provided functionalities for neurological assessment, electronic reporting and prehospital notification of the in-hospital team. Key registrations included any safety issue, mobile connectivity, communication of patient information, audiovisual quality, user-friendliness and accuracy of the prehospital diagnosis. Results Prehospital teleconsultation was obtained in 41 out of 43 cases (95.3%). The success rates for communication of blood pressure, heart rate, blood oxygen saturation, glycemia, and electronic patient identification were 78.7%, 84.8%, 80.6%, 64.0%, and 84.2%. A preliminary prehospital diagnosis was formulated in 90.2%, with satisfactory agreement with final in-hospital diagnoses. Communication of a prehospital report to the in-hospital team was successful in 94.7% and prenotification of the in-hospital team via SMS in 90.2%. Failures resulted mainly from limited mobile connectivity and to a lesser extent from software, hardware or human error. The user acceptance was high. Conclusions Ambulance-based telemedicine of the third generation is safe, feasible and reliable but further research and development, especially

  5. ToHajiilee Economic Development, Inc.(TEDI) Feasibility Study for Utility-Scale Solar

    SciTech Connect

    Burpo, Rob

    2012-02-29

    To Hajiilee Economic Development, Inc. (TEDI) is the economic development entity representing the ToHajiilee Chapter of the Navajo Nation, also known as the Caoncito Band of Navajo (CBN). Using DOE funding, TEDI assembled a team of qualified advisors to conduct a feasibility study for a utility-scale 30 MW Photovoltaic (PV) solar power generation facility on TEDI trust lands. The goal for this project has been to gather information and practical business commitments to successfully complete the feasibility analysis. The TEDI approach was to successively make informed decisions to select an appropriate technology best suited to the site, determine environmental viability of the site, secure options for the sale of generated power, determine practicality of transmission and interconnection of power to the local grid, and secure preliminary commitments on project financing. The feasibility study has been completed and provides TEDI with a practical understanding of its business options in moving forward with developing a solar project on CBN tribal lands. Funding from DOE has allowed TEDI and its team of professional advisors to carefully select technology and business partners and build a business model to develop this utility-scale solar project. As a result of the positive feasibility findings, TEDI is moving forward with finalizing all pre-construction activities for its major renewable energy project.

  6. Feasibility Study of EO SARs as Opportunity Illuminators in Passive Radars: PAZ-Based Case Study.

    PubMed

    Bárcena-Humanes, Jose-Luis; Gómez-Hoyo, Pedro-José; Jarabo-Amores, Maria-Pilar; Mata-Moya, David; Del-Rey-Maestre, Nerea

    2015-01-01

    Passive radars exploit the signal transmitted by other systems, known as opportunity illuminators (OIs), instead of using their own transmitter. Due to its almost total invulnerability to natural disasters or physical attacks, satellite OIs are of special interest. In this line, a feasibility study of Earth Observation Synthetic Aperture Radar (EO SAR) systems as OIs is carried out taking into consideration signal waveform, availability, bistatic geometry, instrumented coverage area and incident power density. A case study based on the use of PAZ, the first Spanish EO SAR, is presented. PAZ transmitted waveform, operation modes, orbit characteristics and antenna and transmitter parameters are analyzed to estimate potential coverages and resolutions. The study concludes that, due to its working in on-demand operating mode, passive radars based on PAZ-type illuminators can be proposed as complementing tools during the sensor commissioning phase, for system maintenance and for improving its performance by providing additional information about the area of interest and/or increasing the data updating speed, exploiting other sensors during the time PAZ is not available. PMID:26593921

  7. Feasibility Study of EO SARs as Opportunity Illuminators in Passive Radars: PAZ-Based Case Study

    PubMed Central

    Bárcena-Humanes, Jose-Luis; Gómez-Hoyo, Pedro-José; Jarabo-Amores, Maria-Pilar; Mata-Moya, David; De-Rey-Maestre, Nerea

    2015-01-01

    Passive radars exploit the signal transmitted by other systems, known as opportunity illuminators (OIs), instead of using their own transmitter. Due to its almost total invulnerability to natural disasters or physical attacks, satellite OIs are of special interest. In this line, a feasibility study of Earth Observation Synthetic Aperture Radar (EO SAR) systems as OIs is carried out taking into consideration signal waveform, availability, bistatic geometry, instrumented coverage area and incident power density. A case study based on the use of PAZ, the first Spanish EO SAR, is presented. PAZ transmitted waveform, operation modes, orbit characteristics and antenna and transmitter parameters are analyzed to estimate potential coverages and resolutions. The study concludes that, due to its working in on-demand operating mode, passive radars based on PAZ-type illuminators can be proposed as complementing tools during the sensor commissioning phase, for system maintenance and for improving its performance by providing additional information about the area of interest and/or increasing the data updating speed, exploiting other sensors during the time PAZ is not available. PMID:26593921

  8. Feasibility Study of EO SARs as Opportunity Illuminators in Passive Radars: PAZ-Based Case Study.

    PubMed

    Bárcena-Humanes, Jose-Luis; Gómez-Hoyo, Pedro-José; Jarabo-Amores, Maria-Pilar; Mata-Moya, David; Del-Rey-Maestre, Nerea

    2015-11-17

    Passive radars exploit the signal transmitted by other systems, known as opportunity illuminators (OIs), instead of using their own transmitter. Due to its almost total invulnerability to natural disasters or physical attacks, satellite OIs are of special interest. In this line, a feasibility study of Earth Observation Synthetic Aperture Radar (EO SAR) systems as OIs is carried out taking into consideration signal waveform, availability, bistatic geometry, instrumented coverage area and incident power density. A case study based on the use of PAZ, the first Spanish EO SAR, is presented. PAZ transmitted waveform, operation modes, orbit characteristics and antenna and transmitter parameters are analyzed to estimate potential coverages and resolutions. The study concludes that, due to its working in on-demand operating mode, passive radars based on PAZ-type illuminators can be proposed as complementing tools during the sensor commissioning phase, for system maintenance and for improving its performance by providing additional information about the area of interest and/or increasing the data updating speed, exploiting other sensors during the time PAZ is not available.

  9. Remedial investigation/feasibility study of the Clinch River/Poplar Creek operable unit. Volume 4. Information related to the feasibility study and ARARs. Appendixes G, H, I

    SciTech Connect

    1996-03-01

    This report presents the findings of an investigation into contamination of the Clinch River and Poplar Creek near the U.S. Department of Energy`s (DOE`s) Oak Ridge Reservation (ORR) in eastern Tennessee. For more than 50 years, various hazardous and radioactive substances have been released to the environment as a result of operations and waste management activities at the ORR. In 1989, the ORR was placed on the National Priorities List (NPL), established and maintained under the federal Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). Under CERCLA, NPL sites must be investigated to determine the nature and extent of contamination at the site, assess the risk to human health and the environment posed by the site, and, if necessary, identify feasible remedial alternatives that could be used to clean the site and reduce risk. To facilitate the overall environmental restoration effort at the ORR, CERCLA activities are being implemented individually as distinct operable units (OUs). This document is the combined Remedial Investigation and Feasibility Study Report for the Clinch River/Poplar Creek OU.

  10. Solar feasibility study for site-specific industrial-process-heat applications. Final report

    SciTech Connect

    Murray, O.L.

    1980-03-18

    This study addresses the technical feasibility of solar energy in industrial process heat (IPH) applications in Mid-America. The study was one of two contracted efforts covering the MASEC 12-state region comprised of: Illinois, Michigan, North Dakota, Indiana, Minnesota, Ohio, Iowa, Missouri, South Dakota, Kansas, Nebraska, Wisconsin. The results of our study are encouraging to the potential future role of solar energy in supplying process heat to a varied range of industries and applications. We identified and developed Case Study documentation of twenty feasible solar IPH applications covering eight major SIC groups within the Mid-American region. The geographical distribution of these applications for the existing range of solar insolation levels are shown and the characteristics of the applications are summarized. The results of the study include process identification, analysis of process heat requirements, selection of preliminary solar system characteristics, and estimation of system performance and cost. These are included in each of the 20 Case Studies. The body of the report is divided into two primary discussion sections dealing with the Study Methodology employed in the effort and the Follow-On Potential of the identified applications with regard to possible demonstration projects. The 20 applications are rated with respect to their relative overall viability and procedures are discussed for possible demonstration project embarkment. Also, a possible extension of this present feasibility study for late-comer industrial firms expressing interest appears worthy of consideration.

  11. The optical field angle distortion calibration feasibility study for the Hubble Space Telescope fine guidance sensors

    NASA Technical Reports Server (NTRS)

    Luchetti, K.; Abshire, G.; Hallock, L.; Mccutcheon, R.

    1988-01-01

    The results of an analytical study to investigate the feasibility of calibrating the Hubble Space Telescope's (HST's) fine guidance sensors (FGSs) within HST mission accuracy limits are presented. The study has two purposes: (1) to determine the mathematical feasibility of the optical field angle distortion (OFAD) calibration algorithm and (2) to confirm that the OFAD, plate scale, and FGS-to-FGS alignment calibration algorithms produced a calibration of the FGSs that satisfied mission requirements. The study concluded that the mathematical specification of the OFAD algorithm is adequate and permits a determination of the FGS calibration parameters (accurate to better than 0.003 arc-second) sufficient to meet the mission requirements. The algorithms implemented, the characteristics of the simulated data and procedures for data analysis, and the study's results are discussed. In addition, several useful techniques for improving the stability and accuracy of the OFAD solution are outlined.

  12. Feasibility study: utilization of landfill gas for a vehicle fuel system, Rossman's landfill, Clackamas County, Oregon

    SciTech Connect

    1981-01-01

    In 1978, a landfill operator in Oregon became interested in the technical and economic feasibility of recovering the methane generated in the landfill for the refueling of vehicles. DOE awarded a grant for a site-specific feasibility study of this concept. This study investigated the expected methane yield and the development of a conceptual gas-gathering system; gas processing, compressing, and storage systems; and methane-fueled vehicle systems. Cost estimates were made for each area of study. The results of the study are presented. Reasoning that gasoline prices will continue to rise and that approximately 18,000 vehicles in the US have been converted to operate on methane, a project is proposed to use this landfill as a demonstration site to produce and process methane and to fuel a fleet (50 to 400) vehicles with the gas produced in order to obtain performance and economic data on the systems used from gas collection through vehicle operation. (LCL)

  13. Feasibility study of replacement procedures and earthquake performance related to gas transmission pipelines. Technical report

    SciTech Connect

    O'Rourke, T.D.; Palmer, M.C.

    1994-05-25

    A general procedure for evaluating the relative risks from earthquake hazards to steel pipelines is developed. The procedure accounts for the influence of traveling ground waves, surface faulting, landslides, and soil liquefaction. The procedure utilizes information, acquired primarily through reconnaissance studies, on regional geology, groundwater conditions, aerial photos, and site-specific soil borings obtained principally through public agencies. Two transmission pipelines in Southern California, Lines 121 and 123, were selected for a feasibility study.

  14. A Summary of Two Recent UAS Command and Control (C2) Communications Feasibility Studies

    NASA Technical Reports Server (NTRS)

    Ponchak, Denise S.; Auld, Elisabeth; Church, Gary; Henriksen, Stephen

    2016-01-01

    In Spring of 2015, the NextGen Institute conducted two UAS C2 Communications Feasibility Studies on behalf of the FAA UAS Integration Office to develop two limited UAS C2 operational examples, each involving low-altitude BLOS (Beyond Line of Sight) Line of Communication (LOC) UAS applications, as part of assessing the myriad practical UAS C2 deployment challenges associated with these approaches. The studies investigated the feasibility of "Point-to-Point" (PTP) and "Network" approaches to UAS C2 to better understand potential user needs and to explore evolutionary paths to establishing a nation-wide system for delivering UAS C2 communications. This paper will summarize the solicitation, approach and results of the two studies teams led by Aviation Management Associates, Inc. and Exelis Inc.

  15. Real-Time fMRI Neurofeedback with War Veterans with Chronic PTSD: A Feasibility Study

    PubMed Central

    Gerin, Mattia I.; Fichtenholtz, Harlan; Roy, Alicia; Walsh, Christopher J.; Krystal, John H.; Southwick, Steven; Hampson, Michelle

    2016-01-01

    Many patients with post-traumatic stress disorder (PTSD), especially war veterans, do not respond to available treatments. Here, we describe a novel neurofeedback (NF) intervention using real-time functional magnetic resonance imaging for treating and studying PTSD. The intervention involves training participants to control amygdala activity after exposure to personalized trauma scripts. Three combat veterans with chronic PTSD participated in this feasibility study. All three participants tolerated well the NF training. Moreover, two participants, despite the chronicity of their symptoms, showed clinically meaningful improvements, while one participant showed a smaller symptom reduction. Examination of changes in resting-state functional connectivity patterns revealed a normalization of brain connectivity consistent with clinical improvement. These preliminary results support feasibility of this novel intervention for PTSD and indicate that larger, well-controlled studies of efficacy are warranted. PMID:27445868

  16. SRB/SLEEC (Solid Rocket Booster/Shingle Lap Extendible Exit Cone) feasibility study, volume 1

    NASA Technical Reports Server (NTRS)

    Baker, William H., Jr.

    1986-01-01

    A preliminary design and analysis was completed for a SLEEC (Shingle Lap Extendible Exit Cone) which could be incorporated on the Space Transportation System (STS) Solid Rocket Booster (SRB). Studies were completed which predicted weights and performance increases and development plans were prepared for the full-scale bench and static test of SLEEC. In conjunction with the design studies, a series of supporting analyses were performed to assure the validity and feasibility of performance, fabrication, cost, and reliability for the selected design. The feasibility and required amounts of bench, static firing, and flight tests considered necessary for the successful incorporation of SLEEC on the Shuttle SRBs were determined. Preliminary plans were completed which define both a follow on study effort and a development program.

  17. Real-Time fMRI Neurofeedback with War Veterans with Chronic PTSD: A Feasibility Study.

    PubMed

    Gerin, Mattia I; Fichtenholtz, Harlan; Roy, Alicia; Walsh, Christopher J; Krystal, John H; Southwick, Steven; Hampson, Michelle

    2016-01-01

    Many patients with post-traumatic stress disorder (PTSD), especially war veterans, do not respond to available treatments. Here, we describe a novel neurofeedback (NF) intervention using real-time functional magnetic resonance imaging for treating and studying PTSD. The intervention involves training participants to control amygdala activity after exposure to personalized trauma scripts. Three combat veterans with chronic PTSD participated in this feasibility study. All three participants tolerated well the NF training. Moreover, two participants, despite the chronicity of their symptoms, showed clinically meaningful improvements, while one participant showed a smaller symptom reduction. Examination of changes in resting-state functional connectivity patterns revealed a normalization of brain connectivity consistent with clinical improvement. These preliminary results support feasibility of this novel intervention for PTSD and indicate that larger, well-controlled studies of efficacy are warranted. PMID:27445868

  18. Use of NEXRAD to study shorebird migration in the Prairie Pothole region: A feasibility study

    USGS Publications Warehouse

    Melcher, Cynthia P.; Skagen, Susan K.; Randall, Lori

    2006-01-01

    An essential component of shorebird conservation is identifying, protecting, and managing high-priority stopover sites and migration habitats crucial to the long-term persistence of migrating shorebirds. Because of the tremendous variability in migrant shorebird occurrence patterns in the Prairie Pothole Region of the U.S. (Skagen 1997), it is labor- and cost-intensive to locate the majority of sites used heavily by shorebirds in any one migration period. Because WSR-88D (Weather Surveillance Radar – 1988 Doppler) or NEXRAD (NEXt generation weather RADar) has been useful for locating migrating birds and revealing migration patterns and important roosting sites of some species (e.g., Diehl and others 2003, Gauthreaux and Belser 2003), we undertook a pilot field study to determine wheTHER it also might be feasible to use NEXRAD for locating important stopover sites used by migrating shorebirds in the prairie potholes landscape. Coordinated efforts to advance the applicability of radar technology to bird conservation are underway (Ruth and others 2005).

  19. Study of Optimal Perimetric Testing in Children (OPTIC): Feasibility, Reliability and Repeatability of Perimetry in Children

    PubMed Central

    Patel, Dipesh E.; Cumberland, Phillippa M.; Walters, Bronwen C.; Russell-Eggitt, Isabelle; Rahi, Jugnoo S.

    2015-01-01

    Purpose To investigate feasibility, reliability and repeatability of perimetry in children. Methods A prospective, observational study recruiting 154 children aged 5–15 years, without an ophthalmic condition that affects the visual field (controls), identified consecutively between May 2012 and November 2013 from hospital eye clinics. Perimetry was undertaken in a single sitting, with standardised protocols, in a randomised order using the Humphrey static (SITA 24–2 FAST), Goldmann and Octopus kinetic perimeters. Data collected included test duration, subjective experience and test quality (incorporating examiner ratings on comprehension of instructions, fatigue, response to visual and auditory stimuli, concentration and co-operation) to assess feasibility and reliability. Testing was repeated within 6 months to assess repeatability. Results Overall feasibility was very high (Goldmann=96.1%, Octopus=89% and Humphrey=100% completed the tests). Examiner rated reliability was ‘good’ in 125 (81.2%) children for Goldmann, 100 (64.9%) for Octopus and 98 (63.6%) for Humphrey perimetry. Goldmann perimetry was the most reliable method in children under 9 years of age. Reliability improved with increasing age (multinomial logistic regression (Goldmann, Octopus and Humphrey), p<0.001). No significant differences were found for any of the three test strategies when examining initial and follow-up data outputs (Bland-Altman plots, n=43), suggesting good test repeatability, although the sample size may preclude detection of a small learning effect. Conclusions Feasibility and reliability of formal perimetry in children improves with age. By the age of 9 years, all the strategies used here were highly feasible and reliable. Clinical assessment of the visual field is achievable in children as young as 5 years, and should be considered where visual field loss is suspected. Since Goldmann perimetry is the most effective strategy in children aged 5–8 years and this

  20. Acoustic treatment of the NASA Langley 4- by 7-meter tunnel: A feasibility study

    NASA Technical Reports Server (NTRS)

    Yu, J. C.; Abrahamson, A. L.

    1986-01-01

    A feasibility study for upgrading the NASA Langley 4- by 7-Meter Tunnel so that it may be used for aeroacoustic research related to helicopters is described. The requirements for noise research leading to the design of the next generation of helicopters impose a set of acoustic test criteria that no existing wind tunnel in the United States can presently meet. Included in this feasibility study are the following considerations: (1) an evaluation of general wind-tunnel requirements and desired tunnel background noise levels for helicopter aeroacoustic research; (2) an assessment of the present acoustic environment for testing model rotors; (3) a diagnostic investigation of tunnel background noise sources and paths; (4) acoustic treatment options for tunnel background noise reduction and a trade-off study between these options; (5) an engineering feasibility assessment of the selected option; and (6) an integrated analysis of study components and recommendations of treatment for an approach to meet the tunnel background noise reduction goal. It is concluded that the Langley 4- by 7-Meter Tunnel is a fundamentally suitable facility for helicopter aeroacoustic research. It is also concluded that acoustic treatment of this facility for meeting the required tunnel background noise goal can be accomplished technically at reasonable risk and cost.

  1. Economic feasibility study for intensive and extensive wastewater treatment considering greenhouse gases emissions.

    PubMed

    Molinos-Senante, M; Hernández-Sancho, F; Sala-Garrido, R; Cirelli, G

    2013-07-15

    Economic feasibility assessments represent a key issue for selecting which wastewater treatment processes should be implemented. The few applications that exist focus on the positive economic value of externalities, overlooking the existence of negative externalities. However, wastewater treatment plants (WWTPs) consume a significant amount of energy, contributing to climate change. In this context, as a pioneering approach, greenhouse gas emissions (GHG) have been incorporated as a negative externality of wastewater treatment. Within this framework, this study aims to compare the economic feasibility of five technologies, both intensive and extensive, for small communities. The results show that both the investment and operation costs are higher for intensive than for extensive technologies. Moreover, significant differences in the value of negative externalities were observed. This study demonstrates that from an economic perspective, constructed wetland is the most suitable option for treating wastewater in small agglomerations.

  2. Feasibility study of a fission supressed blanket for a tandem-mirror hybrid reactor

    SciTech Connect

    Moir, R.W.; Lee, J.D.; Barr, W.L.

    1981-10-05

    A study of fission suppressed blankets for the tandem mirror not only showed such blankets to be feasible but also to be safer than fissioning blankets. Such hybrids could produce enough fissile material to support up to 17 light water reactors of the same nuclear power rating. Beryllium was compared to /sup 7/Li for neutron multiplication; both were considered feasible but the blanket with Li produced 20% less fissile fuel per unit of nuclear power in the reactor. The beryllium resource, while possibly being too small for extensive pure fusion application, would be adequate (with carefully planned industrial expansion) for the hybrid because of the large support ratio, and hence few hybrids required. Radiation damage and coatings for beryllium remain issues to be resolved by further study and experimentation.

  3. Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology

    SciTech Connect

    Islam, M.R.; Joardder, M.U.H.; Hasan, S.M.; Takai, K.; Haniu, H.

    2011-09-15

    In this study on the basis of lab data and available resources in Bangladesh, feasibility study has been carried out for pyrolysis process converting solid tire wastes into pyrolysis oils, solid char and gases. The process considered for detailed analysis was fixed-bed fire-tube heating pyrolysis reactor system. The comparative techno-economic assessment was carried out in US$ for three different sizes plants: medium commercial scale (144 tons/day), small commercial scale (36 tons/day), pilot scale (3.6 tons/day). The assessment showed that medium commercial scale plant was economically feasible, with the lowest unit production cost than small commercial and pilot scale plants for the production of crude pyrolysis oil that could be used as boiler fuel oil and for the production of upgraded liquid-products.

  4. Feasibility study of a self-guided cognitive behaviour therapy internet intervention for cancer carers.

    PubMed

    Scott, Karen; Beatty, Lisa

    2013-01-01

    Despite the evidence base for Internet-delivered self-help programmes, their application to cancer carers has not been reported. This feasibility study evaluated a 6-week internet cognitive behaviour therapy (CBT) programme for early stage cancer carers. The study participants comprised 13 carers who were recruited over a 17-month period. Measures included distress, quality of life and programme engagement. Changes over time were measured using effect sizes (Cohen's d), whereas acceptibility was assessed using qualitative feedback. Low enrolment and high attrition rates resulted in a failure to demonstrate feasibility. Large improvements in negative affect (d=0.88) and emotional functioning (d=0.62) were found. For treatment completers, the intervention holds promise in reducing distress. However, in light of the serious challenges with recruitment and retention, further research is needed to resolve participation barriers. PMID:23796231

  5. Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology.

    PubMed

    Islam, M R; Joardder, M U H; Hasan, S M; Takai, K; Haniu, H

    2011-01-01

    In this study on the basis of lab data and available resources in Bangladesh, feasibility study has been carried out for pyrolysis process converting solid tire wastes into pyrolysis oils, solid char and gases. The process considered for detailed analysis was fixed-bed fire-tube heating pyrolysis reactor system. The comparative techno-economic assessment was carried out in US$ for three different sizes plants: medium commercial scale (144 tons/day), small commercial scale (36 tons/day), pilot scale (3.6 tons/day). The assessment showed that medium commercial scale plant was economically feasible, with the lowest unit production cost than small commercial and pilot scale plants for the production of crude pyrolysis oil that could be used as boiler fuel oil and for the production of upgraded liquid-products.

  6. Offpost operable unit remedial investigation/endangerment assessment/feasibility study, draft final work plan

    SciTech Connect

    1989-12-01

    This document presents the scope of work for additional data collection activities and interpretive reports to be performed in the off-post operable unit (OU) for preparation of: (1) Addendum to the final remedial investigation report; (2)` Revision of the draft final endangerment assessment/feasibility study. The plan is divided into the following sections: (1) Requirements for the RI addendum - technical approach and data collection program for the RI addendum - technical approach and data collection program for ground water, soil, sediment, biota, air; (2) Revision of the endagerment assessment - items that need to be reevaluated; (3) Revision of the feasibility study - evaluation of different media and ARAR`s development of remedial alternatives; (4) Schedule and description of deliverables. Appendix a contains a detailed approach for the 96th avenue risk assessment.

  7. Feasibility of generating quantitative composition images in dual energy mammography: a simulation study

    NASA Astrophysics Data System (ADS)

    Lee, Donghoon; Kim, Ye-seul; Choi, Sunghoon; Lee, Haenghwa; Choi, Seungyeon; Kim, Hee-Joung

    2016-03-01

    Breast cancer is one of the most common malignancies in women. For years, mammography has been used as the gold standard for localizing breast cancer, despite its limitation in determining cancer composition. Therefore, the purpose of this simulation study is to confirm the feasibility of obtaining tumor composition using dual energy digital mammography. To generate X-ray sources for dual energy mammography, 26 kVp and 39 kVp voltages were generated for low and high energy beams, respectively. Additionally, the energy subtraction and inverse mapping functions were applied to provide compositional images. The resultant images showed that the breast composition obtained by the inverse mapping function with cubic fitting achieved the highest accuracy and least noise. Furthermore, breast density analysis with cubic fitting showed less than 10% error compare to true values. In conclusion, this study demonstrated the feasibility of creating individual compositional images and capability of analyzing breast density effectively.

  8. Geosynchronous Microwave Atmospheric Sounding Radiometer (MASR) feasibility studies. Volume 1: Management summary

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The mission of the microwave atmospheric sounding radiometer (MASR) is to collect data to aid in the observation and prediction of severe storms. The geosynchronous orbit allows the continuous atmospheric measurement needed to resolve mesoscale dynamics. The instrument may operate in conjunction with this document, Volume 1 - Management, which summarizes the highlights of final reports on both the radiometer instrument and antenna studies. The radiometer instrument summary includes a synopsis of Volume 2 - Radiometer Receiver Feasibility, including design, recommended configuration, performance estimates, and weight and power estimates. The summary of the antenna study includes a synopsis of Volume 3 - Antenna Feasibility, including preliminary design tradeoffs, performance of selected design, and details of the mechanical/thermal design.

  9. A Feasibility Study on the Control of a Generic Air Vehicle Using Control Moment Gyros

    NASA Technical Reports Server (NTRS)

    Lim, Kyong B.; Moerder, Daniel D.

    2006-01-01

    This paper examines feasibility and performance issues in using Control Moment Gyroscopes (CMGs) to control the attitude of a fixed-wing aircraft. The paper describes a control system structure that permits allocating control authority and bandwidth between a CMG system and conventional aerodynamic control surfaces to stabilize a vehicle with neutral aerodynamic stability. A simulation study explores the interplay between aerodynamic and CMG effects, and indicates desirable physical characteristics for a CMG system to be used for aircraft attitude control.

  10. Feasibility study of a corn-to-ethanol plant in Sardis, Mississippi

    SciTech Connect

    Not Available

    1982-06-01

    A technical description of a chemical processing facility capable of producing 5 million gallons per year of denatured anhydrous ethanol (power alcohol) is presented. In addition, certain equipment options are evaluated on the basis of availability, reliability, and budget constraints. Analysis of logistics and sensitivity of financial decision making criteria to market variables is not within the scope of this study. Consequently, concluding statements are limited to a discussion of technical feasibility and a statement of capital cost for turn-key construction.

  11. Feasibility study of common electronic equipment for shuttle sortie experiment payloads

    NASA Technical Reports Server (NTRS)

    1974-01-01

    A study was conducted to determine the feasibility of using standardized electronic equipment on the space shuttle vehicle in an effort to reduce the cost estimates. The standards for Nuclear Instrument Modules (NIM) and CAMAC electronic equipment are presented and described. It was determined that the CAMAC electronic equipment was more suitable for use with the space shuttle systems. Specific applications of the CAMAC equipment are analyzed. Illustrations of the equipment and circuit diagrams of the subsystems are provided.

  12. The 2-8 GHz solar dynamic spectra and polarization measurement feasibility study

    NASA Technical Reports Server (NTRS)

    Haddock, F. T.

    1971-01-01

    The preliminary system design of a Solar Microwave Spectrograph (SMS) is presented. This design resulted from a study to determine the feasibility of measuring solar polarization and dynamic spectra over the range of two to eight GHz, using broadband radio frequency instrumentation and rapid recording equipment in conjunction with radio telescopes. The scientific value of the proposed SMS instrument is discussed, with remarks concerning data reduction and analysis and a presentation of the engineering plan to implement the SMS system.

  13. Nonintrusive gas monitoring in neonatal lungs using diode laser spectroscopy: feasibility study

    NASA Astrophysics Data System (ADS)

    Lewander, Märta; Bruzelius, Anders; Svanberg, Sune; Svanberg, Katarina; Fellman, Vineta

    2011-12-01

    A feasibility study on noninvasive, real-time monitoring of gases in lungs of preterm infants is reported, where a laser-spectroscopic technique using diode lasers tuned to oxygen and water vapor absorption lines was employed on realistic tissue phantoms. Our work suggests that the technique could provide a new possibility for surveillance of the lung function of preterm infants, in particular the oxygenation, which is of prime importance in this patient group.

  14. Improving care quality and preventing maltreatment in institutional care – a feasibility study with caregivers

    PubMed Central

    Hermenau, Katharin; Kaltenbach, Elisa; Mkinga, Getrude; Hecker, Tobias

    2015-01-01

    Institutionalized children in low-income countries often face maltreatment and inadequate caregiving. In addition to prior traumatization and other childhood adversities in the family of origin, abuse and neglect in institutional care are linked to various mental health problems. By providing a manualized training workshop for caregivers, we aimed at improving care quality and preventing maltreatment in institutional care. In Study 1, 29 participating caregivers rated feasibility and efficacy of the training immediately before, directly after, and 3 months following the training workshop. The results showed high demand, good feasibility, high motivation, and acceptance of caregivers. They reported improvements in caregiver–child relationships, as well as in the children’s behavior. Study 2 assessed exposure to maltreatment and the mental health of 28 orphans living in one institution in which all caregivers had been trained. The children were interviewed 20 months before, 1 month before, and 3 months after the training. Children reported a decrease in physical maltreatment and assessments showed a decrease in mental health problems. Our approach seems feasible under challenging circumstances and provides first hints for its efficacy. These promising findings call for further studies testing the efficacy and sustainability of this maltreatment prevention approach. PMID:26236248

  15. Feasibility study and roadmap to improve residential hot water distribution systems

    SciTech Connect

    Lutz, James D.

    2004-03-31

    Residential building practice currently ignores the losses of energy and water caused by the poor design of hot water systems. These losses include: the waste of water while waiting for hot water to get to the point of use; the wasted heat as water cools down in the distribution system after a draw; and the energy to reheat water that was already heated once before. A feasibility study and an action plan for a proposed research project involving residential hot water distribution systems is being developed. The feasibility study will use past work to estimate of hot water and energy loses caused by current hot water distribution systems in residences. Proposed research project, or roadmap, will develop recommendations for improvements to residential hot water distribution systems. The roadmap addresses the technical obstacles and gaps in our knowledge that prevent water and energy reductions and market adoption of water- and energy-efficient technologies. The initial results of the feasibility study are presented here along with a discussion of a roadmap to improve the efficiency of residential hot water distribution systems.

  16. Exploring physical activity with a low psychological burden and high feasibility in Japan: a qualitative study.

    PubMed

    Shimazaki, Takashi; Iio, Misa; Lee, YingHua; Konuma, Kayo; Takenaka, Koji

    2016-12-01

    Previous research has shown that physical activity with a low psychological burden and high feasibility (i.e. a focus on small lifestyle changes) contributes to the adoption of and long-term success in behavior change intervention. The present study aims to explore the physical activity with a low psychological burden and high feasibility in which people already engage in their everyday life in Japan. Sixty-four participants (22 males and 42 females ranging in age from 36 to 89) participated in a qualitative research survey that asked what type of physical activity they engaged in on a daily basis to maintain good health. Results of a thematic analysis revealed nine themes (behavioral categories), which included four core themes of exercise, gymnastic exercises, stretch exercises, sports, and strength training, and five core themes of nonexercise activity, walking, cleaning, using the stairs, engaging in agriculture, and gardening based on a description analysis. A thematic map was constructed based on Japanese physical activity guidelines. Key findings of this study are as follows: (1) walking has a low psychological burden and high feasibility; (2) gymnastic exercise is efficacious from a physical and psychological perspective; (3) nonexercise activities are more acceptable than exercise activities; and (4) a focus on intervention with nonexercise activities has the potential for high engagement in the Japanese population. The study indicates that significant resources are available for promoting health behavior change interventions that would increase physical activity in the Japanese population. PMID:26785720

  17. Enhancing hope among early female survivors of childhood cancer via the internet: a feasibility study.

    PubMed

    Cantrell, Mary Ann; Conte, Teresa

    2008-01-01

    The purpose of this research was to establish the feasibility of delivering the Hope Intervention Program (HIP) using a Web-based design among 6 female survivors of childhood cancer. The HIP is an 8-week program to foster and promote hope. Each session of the HIP has specific focus, goals, and activities that offer opportunities for participants to share and discuss issues of importance to them. The HIP was delivered online with the use of educational software that included Web cameras and voice and text chat capabilities. Feasibility was evaluated by examining how easily and effectively the software and hardware technology could be used to deliver the HIP and if meaningful dialogue and interactions among the study participants and the nurse interventionist could occur online. The evaluation of this study suggested that using a Web-based approach was effective in the delivery of the intervention, as evidenced by participants' evaluation of the program and their descriptive comments that reflect that the online sessions promoted intimate, meaningful human-to-human interactions to foster hope and build a trusting relationship among and between group members. The results of this study suggest that Web-based psychosocial nursing interventions for survivors of childhood survivors are feasible for nurse researchers to conduct. PMID:18772662

  18. Feasibility Study of Passive Aerosol Sampler for Bio-Agent Detection

    SciTech Connect

    Keating, G

    2003-03-05

    We propose to establish the feasibility of a passive aerosol sampler for bio-agent collection through laboratory experiments and theoretical analysis. The passive sampler, unlike the typical active sampler, does not require pumps and complex fixtures, and thereby allows for large-scale field monitoring not possible with current active samplers. We plan to conduct experiments using model (both biological and non-biological) aerosols generated in an instrumented test chamber and compare the particles collected on various passive samplers to conventional filter samplers, commercial aerosol measuring instruments and to conventional surface swipes. Theoretical analysis will be used to design prototype passive samplers and to compare experimental results with theory. A successful feasibility study will be used to seek outside funding for applications that will greatly enhance current LLNL programs such as NARAC's atmospheric dispersal modeling, NAI's programs in bioagent monitoring in public locations and fixed sampling stations, and EPD's environmental monitoring and decontamination research. In addition, the feasibility study will position us favorably for responding to new calls for proposals by NIH and EPA for large scale environmental studies.

  19. Exploring physical activity with a low psychological burden and high feasibility in Japan: a qualitative study.

    PubMed

    Shimazaki, Takashi; Iio, Misa; Lee, YingHua; Konuma, Kayo; Takenaka, Koji

    2016-12-01

    Previous research has shown that physical activity with a low psychological burden and high feasibility (i.e. a focus on small lifestyle changes) contributes to the adoption of and long-term success in behavior change intervention. The present study aims to explore the physical activity with a low psychological burden and high feasibility in which people already engage in their everyday life in Japan. Sixty-four participants (22 males and 42 females ranging in age from 36 to 89) participated in a qualitative research survey that asked what type of physical activity they engaged in on a daily basis to maintain good health. Results of a thematic analysis revealed nine themes (behavioral categories), which included four core themes of exercise, gymnastic exercises, stretch exercises, sports, and strength training, and five core themes of nonexercise activity, walking, cleaning, using the stairs, engaging in agriculture, and gardening based on a description analysis. A thematic map was constructed based on Japanese physical activity guidelines. Key findings of this study are as follows: (1) walking has a low psychological burden and high feasibility; (2) gymnastic exercise is efficacious from a physical and psychological perspective; (3) nonexercise activities are more acceptable than exercise activities; and (4) a focus on intervention with nonexercise activities has the potential for high engagement in the Japanese population. The study indicates that significant resources are available for promoting health behavior change interventions that would increase physical activity in the Japanese population.

  20. A Feasibility Study of Wearable Activity Monitors for Pre-Adolescent School-Age Children

    PubMed Central

    Van Loan, Marta; German, J. Bruce

    2014-01-01

    Introduction Understanding physical activity is key in the fight against childhood obesity. The objective of this study was to examine the feasibility of using certain wearable devices to measure physical activity among children. Methods A qualitative study was conducted with 25 children aged 7 to 10 years to assess acceptability and compliance of wearable activity devices in this age group. During March through August 2012, children participated in a 4-week study of 3 accelerometer models and a heart rate monitor. Children were asked to use a different device each week for 7 consecutive days. Children and their parents completed structured interviews after using each device; they also completed a final exit interview. Results The wrist-worn Polar Active was the device most preferred by children and was associated with the highest level of compliance. Devices that are comfortable to wear, fit properly, have engaging features, and are waterproof increase feasibility and are associated with higher levels of compliance. Conclusion The wrist-worn device was the most feasible for measuring physical activity among children aged 7 to 10 years. These findings will inform researchers in selecting tools for measuring children’s physical activity. PMID:24854236