Tool For Driving Many Fasteners Simultaneously

NASA Technical Reports Server (NTRS)

Cook, Joseph S., Jr.

1995-01-01

Proposed tool tightens or loosens several bolts, screws, nuts, or other threaded fasteners arranged in circle on compressor head, automotive wheel, pipe-end flange, or similar object. Enables assembly or disassembly in fraction of time needed to tighten fasteners one at a time. Simultaneously applies same torque to all fasteners, preventing distortion and enhancing reliability. Concept not limited to circular fastener patterns. Adapted to rectangular configurations like on engine intake manifolds, by adding gears to drive train to provide proper spacing. Designed to deliver fixed or adjustable maximum torque. To ensure even seal loading, piston pressure simultaneously ramped from initial to final values to maintain relatively constant torque loading on all fasteners until final specifications limit achieved.

Testing of Compact Bolted Fasteners with Insulation and Friction-Enhanced Shims for NCSX

DOE Office of Scientific and Technical Information (OSTI.GOV)

L. E. Dudek, J.H. Chrzanowski, G. Gettelfinger, P. Heitzenroeder, S. Jurczynski, M. Viola and K. Freudenberg

The fastening of the National Compact Stellarator Experiment's (NCSX) modular coils presented a number of engineering and manufacturing challenges due to the high magnetic forces, need to control induced currents, tight tolerances and restrictive space envelope. A fastening method using high strength studs, jack nuts, insulating spacers, bushings and alumina coated shims was developed which met the requirements. A test program was conducted to verify the design. The tests included measurements of flatness of the spacers, determination of contact area, torque vs. tension of the studs and jack nuts, friction coefficient tests on the alumina and G-10 insulators, electrical tests,more » and tension relaxation tests due to temperature excursions from room temperature to liquid nitrogen temperatures. This paper will describe the design and the results of the test program.« less

Ergonomic analysis of fastening vibration based on ISO Standard 5349 (2001).

PubMed

Joshi, Akul; Leu, Ming; Murray, Susan

2012-11-01

Hand-held power tools used for fastening operations exert high dynamic forces on the operator's hand-arm, potentially causing injuries to the operator in the long run. This paper presents a study that analyzed the vibrations exerted by two hand-held power tools used for fastening operations with the operating exhibiting different postures. The two pneumatic tools, a right-angled nut-runner and an offset pistol-grip, are used to install shearing-type fasteners. A tri-axial accelerometer is used to measure the tool's vibration. The position and orientation of the transducer mounted on the tool follows the ISO-5349 Standard. The measured vibration data is used to compare the two power tools at different operating postures. The data analysis determines the number of years required to reach a 10% probability of developing finger blanching. The results indicate that the pistol-grip tool induces more vibration in the hand-arm than the right-angled nut-runner and that the vibrations exerted on the hand-arm vary for different postures. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

An ultrasonic technique for measuring stress in fasteners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, K. J.; Day, P.; Byron, D.

1999-12-02

High temperature bolting alloys are extensively used in the thermal power generation industry as for example, reheat ESV and Governor valve studs. Remnant life assessment methodologies and plant maintenance procedures require the monitoring of the operational stress levels in these fasteners. Some conventional ultrasonic techniques require longitudinal wave measurements to be undertaken when the nut on the bolt is loosened and then re-tightened. Other techniques use a combination of shear waves and longitudinal waves. In this paper, the problems and pitfalls associated with various ultrasonic techniques for measuring stress in bolts, is discussed. An ultrasonic technique developed for measuring themore » stress in Durehete 1055 bolts is presented. Material from a textured rolled bar has been used as a test bed in the development work. The technique uses shear wave birefringence and compression waves at several frequencies to measure texture, fastener length and the average stress. The technique was developed by making ultrasonic measurements on bolts tensioned in universal testing machines and a hydraulic nut. The ultrasonic measurements of residual stress have been checked against strain gauge measurements. The Durehete bolts have a hollow cylinder geometry of restricted dimensions, which significantly alters compression and shear wave velocities from bulk values and introduces hoop stresses which can be measured by rotating the polarization of the shear wave probe. Modelling of the experimental results has been undertaken using theories for the elastic wave propagation through waveguides. The dispersion equations allow the velocity and length of the fastener to be measured ultrasonically in some situations where the length of the fastener can not be measured directly with a vernier caliper or micrometer and/or where it is undesirable to loosen nuts to take calibration readings of the shear and compression wave velocities.« less

Wear Improvement of Tools in the Cold Forging Process for Long Hex Flange Nuts.

PubMed

Hsia, Shao-Yi; Shih, Po-Yueh

2015-09-25

Cold forging has played a critical role in fasteners and has been widely used in automotive production, manufacturing, aviation and 3C (Computer, Communication, and Consumer electronics). Despite its extensive use in fastener forming and die design, operator experience and trial and error make it subjective and unreliable owing to the difficulty of controlling the development schedule. This study used finite element analysis to establish and simulate wear in automotive repair fastener manufacturing dies based on actual process conditions. The places on a die that wore most quickly were forecast, with the stress levels obtained being substituted into the Archard equation to calculate die wear. A 19.87% improvement in wear optimization occurred by applying the Taguchi quality method to the new design. Additionally, a comparison of actual manufacturing data to simulations revealed a nut forging size error within 2%, thereby demonstrating the accuracy of this theoretical analysis. Finally, SEM micrographs of the worn surfaces on the upper punch indicate that the primary wear mechanism on the cold forging die for long hex flange nuts was adhesive wear. The results can simplify the development schedule, reduce the number of trials and further enhance production quality and die life.

Wear Improvement of Tools in the Cold Forging Process for Long Hex Flange Nuts

PubMed Central

Hsia, Shao-Yi; Shih, Po-Yueh

2015-01-01

Cold forging has played a critical role in fasteners and has been widely used in automotive production, manufacturing, aviation and 3C (Computer, Communication, and Consumer electronics). Despite its extensive use in fastener forming and die design, operator experience and trial and error make it subjective and unreliable owing to the difficulty of controlling the development schedule. This study used finite element analysis to establish and simulate wear in automotive repair fastener manufacturing dies based on actual process conditions. The places on a die that wore most quickly were forecast, with the stress levels obtained being substituted into the Archard equation to calculate die wear. A 19.87% improvement in wear optimization occurred by applying the Taguchi quality method to the new design. Additionally, a comparison of actual manufacturing data to simulations revealed a nut forging size error within 2%, thereby demonstrating the accuracy of this theoretical analysis. Finally, SEM micrographs of the worn surfaces on the upper punch indicate that the primary wear mechanism on the cold forging die for long hex flange nuts was adhesive wear. The results can simplify the development schedule, reduce the number of trials and further enhance production quality and die life. PMID:28793589

Lubricating Holes for Corroded Nuts and Bolts

NASA Technical Reports Server (NTRS)

Penn, B. G.; Clemons, J. M.; Ledbetter, Frank E., III

1986-01-01

Corroded fasteners taken apart more easily. Lubricating holes bored to thread from three of flats. Holes facilitate application of penetrating oil to help loosen nut when rusted onto bolt. Holes make it possible to apply lubricants and rust removers directly to more of thread than otherwise reachable.

Automatic, computerized testing of bolts

NASA Technical Reports Server (NTRS)

Carlucci, J., Jr.; Lobb, V. B.; Stoller, F. W.

1970-01-01

System for testing bolts with various platings, lubricants, nuts, and tightening procedures tests 200 fasteners, and processes and summarizes the results, within one month. System measures input torque, nut rotation, bolt clamping force, bolt shank twist, and bolt elongation, data is printed in report form. Test apparatus is described.

77 FR 46943 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-07

... compliance time; therefore, an operator may choose to add the reinforcing fiberglass overcoat before the... discrepant quantities of nut plates and types of fasteners called out in Boeing Alert Service Bulletin 747... different airplane configuration that might use a different quantity of nut plates than what is specified in...

Standard specification for carbon and alloy steel nuts. ASTM standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This specification is under the jurisdiction of ASTM Committee F-16 on Fasteners and is the responsibility of Subcommittee F16.02 on Steel Bolts, Nuts, Rivets, and Washers. Current edition approved Dec. 10, 1997. Published July 1998. Originally published as A 563-66. Last previous edition A 563-96.

A Faster Fastener

NASA Technical Reports Server (NTRS)

2000-01-01

A licensing agreement between Marshall Space Flight Center and M&A Screw and Machineworks has brought the quick connect nut to the commerical market. Originally designed as part of a project seeking in-space assembly techniques, the quick connect nut is secured around a bolt merely by pushing it onto the bolt and giving it a single twist. Applications for the nuts include oil drilling platforms, mining industry, and other practices that rely on speedy assembly for success.

Preload Loss in a Spacecraft Fastener via Vibration-Induced Unwinding

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher; Howard, S. Adam; Hess, Daniel P.

2018-01-01

Sound engineering practice requires that fasteners and bolted joints maintain preload in service. NASA recently concluded a series of vibration tests of a multicomponent structure intended to simulate an upper stage section of a launch vehicle. The stacked components were joined through six circumferentially placed bolted cup-cone-style pyrotechnic joint mechanisms designed to share spacecraft structural loads and then enable separation during ascent. Over the course of the vibration test campaign, all six bolted cup-cone mechanisms experienced some degree of preload loss with two mechanisms losing half of their original bolt preload. A subsequent forensic anomaly investigation concluded that vibration-induced unwinding of the preload nut-and-bolt assemblies occurred despite the use of safety wire and high levels of thread friction. A series of experiments were done to better understand how large, heavily preloaded fasteners could unwind. Additionally, thread friction torque was measured and the fastener locking capability of safety wire was evaluated. The friction coefficient between the clamped cup-cone components was characterized and finally a highly instrumented mechanism-level vibration test was done to reproduce the unwinding phenomenon to better understand the mechanism's behavior. The conclusion drawn was that vibration and structural forces led to relative motion (sliding) of the clamped components, resulting in self-loosening and unwinding effects on the nut-and-bolt assembly. To counter this phenomenon, more effective fastener locking methodologies were recommended and a follow-on effort was initiated to quantify the relationship between preload, component motion, and resulting unwinding forces. It is hoped that elucidation of these effects can be used to design more effective fastener locking features.

Reversible fastener clamp load monitor with continuous visual or remote readout

NASA Astrophysics Data System (ADS)

Hodge, Malcolm H.; Kausel, Theodore C., Jr.; Begley, Matthew R.

1998-03-01

SIMS has developed a simple means for detecting and monitoring both absolute and relative clamp load, or bolt tension, in fastener systems. More than twenty-five percent of automotive failures are known to be due to undetected loss of fastener clamp load. While the equivalent aerospace maintenance statistics are not known, the average automobile has 3,500 fasteners while a Boeing 747 has closer to one million. It is therefore anticipated that the new SensaBolt clamp load tracking system could find wide applications in the aerospace arena. We describe a visually-evident and retrofitted clamp load monitoring design which is based on the differential joint substrate compression at, and immediately adjacent to, the fastener location. This intrinsically-accurate indicator does not necessarily require alteration in either the bolt or nut geometries, thereby facilitating product introduction and retrofit in aging aircraft applications. In addition, SensaBolt's sole reliance on substrate compression renders it more accurate then torque wrench or turn-of-nut techniques. Readout may be accomplished by any of three principal methods: for those applications with ease of access to the sensor, loss of tension can be determined by direct visual inspection. Application of a standard wrench can then be made to restore the fastener's proper tightness, per the SensaBolt indicators. In those instances where line-of-sight is unimpeded and more formal inspection is desired, the SensaBolt may be interrogated by a laser scanner bar code reader. Finally, SensaBolt may be addressed by the SIMS fiber optic harness for those instances where full-time remote interrogation is desired.

Evaluation of MSFC-STD-486, ''Threaded Fasteners, Torque Limits For'' for use in the construction of aerospace vhicles

NASA Technical Reports Server (NTRS)

Hart, J. F.

1973-01-01

MSFC-STD-486, Threaded Fasteners, Torque Limits For, is a relatively new standard that has not had much user experience. This test was run to provide such experience and verify the values in MSFC-STD-486. This was accomplished by plotting torque-tension curves on aluminum and alloy steel aircraft quality bolts and nuts through 1/2 inch in diameter.

Solid Rocket Booster Hydraulic Pump Port Cap Joint Load Testing

NASA Technical Reports Server (NTRS)

Gamwell, W. R.; Murphy, N. C.

2004-01-01

The solid rocket booster uses hydraulic pumps fabricated from cast C355 aluminum alloy, with 17-4 PH stainless steel pump port caps. Corrosion-resistant steel, MS51830 CA204L self-locking screw thread inserts are installed into C355 pump housings, with A286 stainless steel fasteners installed into the insert to secure the pump port cap to the housing. In the past, pump port cap fasteners were installed to a torque of 33 Nm (300 in-lb). However, the structural analyses used a significantly higher nut factor than indicated during tests conducted by Boeing Space Systems. When the torque values were reassessed using Boeing's nut factor, the fastener preload had a factor of safety of less than 1, with potential for overloading the joint. This paper describes how behavior was determined for a preloaded joint with a steel bolt threaded into steel inserts in aluminum parts. Finite element models were compared with test results. For all initial bolt preloads, bolt loads increased as external applied loads increased. For higher initial bolt preloads, less load was transferred into the bolt, due to external applied loading. Lower torque limits were established for pump port cap fasteners and additional limits were placed on insert axial deformation under operating conditions after seating the insert with an initial preload.

Pressurized fluid torque driver control and method

NASA Technical Reports Server (NTRS)

Cook, Joseph S., Jr. (Inventor)

1994-01-01

Methods and apparatus are provided for a torque driver including a displaceable gear to limit torque transfer to a fastener at a precisely controlled torque limit. A biasing assembly biases a first gear into engagement with a second gear for torque transfer between the first and second gear. The biasing assembly includes a pressurized cylinder controlled at a constant pressure that corresponds to a torque limit. A calibrated gage and valve is used to set the desired torque limit. One or more coiled output linkages connect the first gear with the fastener adaptor which may be a socket for a nut. A gear tooth profile provides a separation force that overcomes the bias to limit torque at the desired torque limit. Multiple fasteners may be rotated simultaneously to a desired torque limit if additional output spur gears are provided. The torque limit is adjustable and may be different for fasteners within the same fastener configuration.

Displaceable Gear Torque Controlled Driver

NASA Technical Reports Server (NTRS)

Cook, Joseph S., Jr. (Inventor)

1997-01-01

Methods and apparatus are provided for a torque driver including a displaceable gear to limit torque transfer to a fastener at a precisely controlled torque limit. A biasing assembly biases a first gear into engagement with a second gear for torque transfer between the first and second gear. The biasing assembly includes a pressurized cylinder controlled at a constant pressure that corresponds to a torque limit. A calibrated gage and valve is used to set the desired torque limit. One or more coiled output linkages connect the first gear with the fastener adaptor which may be a socket for a nut. A gear tooth profile provides a separation force that overcomes the bias to limit torque at the desired torque limit. Multiple fasteners may be rotated simultaneously to a desired torque limit if additional output spur gears are provided. The torque limit is adjustable and may be different for fasteners within the same fastener configuration.

Tool Preloads Screw and Applies Locknut

NASA Technical Reports Server (NTRS)

Wood, K. E.

1982-01-01

Special tool reaches through structural members inside Space Shuttle fasten nut on preloaded screw that holds thermal protection tile against outside skin of vehicle. Tool attaches tiles with accuratelycontrolled tensile loading.

Fastener Starter

NASA Technical Reports Server (NTRS)

Chandler, Faith; Garton, Harry; Valentino, Bill; Amett, Mike

2005-01-01

The Fastener Starter is a creative solution to prevent the loss of small fasteners during their installation. This is the only currently available tool that can firmly grip and hold a single screw, bolt, nut, washer, spacer, or any combination of these parts. Other commercially available fastener starters are unable to accommodate a variety of parts simultaneously. The Fastener Starter is a more capable and easier tool to use than prior tools. Its compact size allows it to be used effectively in cramped, difficult-to-see locations. Its design also allows it to be used with or without handles and extenders in other difficult-to-reach locations. It provides better protection against cross threading and loss of fasteners and associated parts. The Fastener Starter is non-magnetic and does not off-gas, thus meeting flight hardware requirements. The Fastener Starter incorporates a combination of features of several commercially available tools, providing an improved means of installing small fasteners. The Fastener Starter includes a custom molded insert that can be removed easily and replaced with a conventional tool bit (e.g., a screwdriver or hex-driver bit). When used with the insert, the Fastener Starter prevents cross threading and damage to internal threaded holes. This is achieved by allowing the fastener to slip within the tool insert when used without a conventional tool bit. Alternatively, without the insert and with a tool bit, the Fastener Starter can torque a fastener. The Fastener Starter has a square recess hole that accepts a conventional square drive handle or extension to accommodate a variety of applications by providing flexibility in handle style and length.

Motor-driven screwing and transporting tool for reactor pressure vessel head retaining fastenings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholz, M.

1977-09-13

The invention concerns a motor-driven screwing and transporting tool for tightening or loosening the threaded studs and associated tightening nuts of the head bolting of pressure vessels. After the tightening nuts are loosened or before they are tightened, the weight of the studs is taken over by rotating bearings that can be lifted, so that the studs with their tightening nuts can be screwed in or out, the screw threads of the studs being thus weight-relieved. The invention is intended primarily for nuclear reactor pressure vessels. 21 claims, 6 figures.

Effect of thread shape on screw stress concentration by photoelastic measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dragoni, E.

1994-11-01

The screw stress concentration for six nut-bolt connections embodying three different thread profiles and two nut shapes is measured photoelastically. Buttress (nearly zero flank angle), trapezoidal (15-deg flank angle), and triangular (30-deg flank angle) thread forms are examined in combination with standard and lip-type nuts. The effect of the thread profile on the screw stress concentration appears to be dependent upon the kind of nut considered. If the fastening incorporates a standard nut, the buttress thread is stronger than the triangular one, which, in turn, behaves better than the trapezoidal contour. The improvement is roughly a 20% reduction in themore » stress concentration factor from the trapezoidal to the buttress thread. In the case of lip nut, conversely, this tendency is somewhat reversed, with the trapezoidal thread performing slightly (but not decidedly) better than the other two shapes. Finally, averaged over all three thread forms, the lip nut exhibits a stress concentration factor which is about 50% lower than that of the standard nut.« less

Fatigue acceptance test limit criterion for larger diameter rolled thread fasteners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kephart, A.R.

1997-05-01

This document describes a fatigue lifetime acceptance test criterion by which studs having rolled threads, larger than 1.0 inches in diameter, can be assured to meet minimum quality attributes associated with a controlled rolling process. This criterion is derived from a stress dependent, room temperature air fatigue database for test studs having a 0.625 inch diameter threads of Alloys X-750 HTH and direct aged 625. Anticipated fatigue lives of larger threads are based on thread root elastic stress concentration factors which increase with increasing thread diameters. Over the thread size range of interest, a 30% increase in notch stress ismore » equivalent to a factor of five (5X) reduction in fatigue life. The resulting diameter dependent fatigue acceptance criterion is normalized to the aerospace rolled thread acceptance standards for a 1.0 inch diameter, 0.125 inch pitch, Unified National thread with a controlled Root radius (UNR). Testing was conducted at a stress of 50% of the minimum specified material ultimate strength, 80 Ksi, and at a stress ratio (R) of 0.10. Limited test data for fastener diameters of 1.00 to 2.25 inches are compared to the acceptance criterion. Sensitivity of fatigue life of threads to test nut geometry variables was also shown to be dependent on notch stress conditions. Bearing surface concavity of the compression nuts and thread flank contact mismatch conditions can significantly affect the fastener fatigue life. Without improved controls these conditions could potentially provide misleading acceptance data. Alternate test nut geometry features are described and implemented in the rolled thread stud specification, MIL-DTL-24789(SH), to mitigate the potential effects on fatigue acceptance data.« less

Detection of fastener loosening in simple lap joint based on ultrasonic wavefield imaging

NASA Astrophysics Data System (ADS)

Gooda Sahib, M. I.; Leong, S. J.; Chia, C. C.; Mustapha, F.

2017-12-01

Joints in aero-mechanical structures are critical elements that ensure the structural integrity but they are prone to damages. Inspection of such joints that have no prior baseline data is really challenging but it can be possibly done using the Ultrasonic Propagation Imager (UPI). The feasibility of applying UPI for detection of loosened fastener is investigated in this study. A simple lap joint specimen made by connecting two pieces of 2.5mm thick SAE304 stainless steel plates using five M6 screws and nuts has been used in this study. All fasteners are tightened to 10Nm but one of them is completely loosened to simulate the damage. The wavefield data is processed into ultrasonic wavefield propagation video and a series of spectral amplitude images. The spectral images showed noticeable amplitude difference at the loosened fastener, hence confirmed the feasibility of using UPI for structural joints inspection. A simple contrast maximization method is also introduced to improve the result.

Spline-Screw Multiple-Rotation Mechanism

NASA Technical Reports Server (NTRS)

Vranish, John M.

1994-01-01

Mechanism functions like combined robotic gripper and nut runner. Spline-screw multiple-rotation mechanism related to spline-screw payload-fastening system described in (GSC-13454). Incorporated as subsystem in alternative version of system. Mechanism functions like combination of robotic gripper and nut runner; provides both secure grip and rotary actuation of other parts of system. Used in system in which no need to make or break electrical connections to payload during robotic installation or removal of payload. More complicated version needed to make and break electrical connections. Mechanism mounted in payload.

Inedible Nuts and Non-Lightning Bolts

ERIC Educational Resources Information Center

Rynone, William

2010-01-01

In this article, the author provides detailed information on a wide variety of commonly used screws, bolts, and other fasteners. The information has been gathered in his engineering career and outside interests (maintenance on his car and airplane, and woodworking). The topic should be of interest to students and educators in many technical…

Continuity and Change in India’s Foreign Policy: The Next Five Years,

DTIC Science & Technology

1984-01-01

mainly of food products (tea, coffee, rice, cashews , pepper), tobacco, leather goods, cotton textiles, jute products, light engineering goods, and...industrial fasteners ( nuts and bolts), for example, have drawn strong Indian protests, and the protectionist mood in the United States, as reflected in

Testing and evaluation of Vespel up to 450 deg F when used in nuts and bolts as a self-locking element

NASA Technical Reports Server (NTRS)

Wood, C. M.

1984-01-01

The object of this investigation was to evaluate Vespel for potential application on the Solid Rocket Booster to replace all-metal deformed self-locking nuts and anchor nuts and be used as self-locking elements for bolts and screws. The Vespel self-locking elements were tested for prevailing torque retention at room temperature, after heating to 450 F and exposure for 3 hr, breakaway torque at 450 F and for vibration at a level consistent with the maximum expected on the SRB at lift-off and reentry. The investigation revealed Vespel has properties that can provide a self-locking capability for threaded fasteners up to 450 F and it can be used in nuts and anchor nuts for installation on the SRB. Vespel elements in bolts did not meet all our SRB requirements for reuse, however, we have defined a design for Vespel elements in nuts/anchor nuts that fully meets all requirements. It is recommended that No. 1, 1/4 in. and 5/16 in. nuts/anchor nuts be procured for use on the SRB. This system will eliminate the galling problems now encountered and achieve a much higher reuse life than the present deformed nut design.

29 CFR 1915.134 - Abrasive wheels.

Code of Federal Regulations, 2012 CFR

2012-07-01

... shall be so mounted as to maintain proper alignment with the wheel, and the guard and its fastenings... safety flanges are required, they shall be used only with wheels designed to fit the flanges. Only safety... wheels shall fit freely on the spindle and shall not be forced on. The spindle nut shall be tightened...

29 CFR 1915.134 - Abrasive wheels.

Code of Federal Regulations, 2013 CFR

2013-07-01

... shall be so mounted as to maintain proper alignment with the wheel, and the guard and its fastenings... safety flanges are required, they shall be used only with wheels designed to fit the flanges. Only safety... wheels shall fit freely on the spindle and shall not be forced on. The spindle nut shall be tightened...

29 CFR 1915.134 - Abrasive wheels.

Code of Federal Regulations, 2014 CFR

2014-07-01

... shall be so mounted as to maintain proper alignment with the wheel, and the guard and its fastenings... safety flanges are required, they shall be used only with wheels designed to fit the flanges. Only safety... wheels shall fit freely on the spindle and shall not be forced on. The spindle nut shall be tightened...

Aerospace Threaded Fastener Strength in Combined Shear and Tension Loading

NASA Technical Reports Server (NTRS)

Steeve, B. E.; Wingate, R. J.

2012-01-01

A test program was initiated by Marshall Space Flight Center and sponsored by the NASA Engineering and Safety Center to characterize the failure behavior of a typical high-strength aerospace threaded fastener under a range of shear to tension loading ratios for both a nut and an insert configuration where the shear plane passes through the body and threads, respectively. The testing was performed with a customized test fixture designed to test a bolt with a single shear plane at a discrete range of loading angles. The results provide data to compare against existing combined loading failure criteria and to quantify the bolt strength when the shear plane passes through the threads.

Development of Anti-Loosening Performance of Hyper Lock Nut

NASA Astrophysics Data System (ADS)

Nishiyama, Shuji; Migita, Hiroaki; Kataoka, Mitumasa; Nakasaki, Nobuyuki; Murano, Kohshi

Bolted joints are widely used in mechanical structures as they allow easy disassembly for maintenance without high cost. However, vibration-induced loosening due to dynamic loading remains a long-unresolved issue. We have developed a new type of nut named the hyper lock nut (HLN) that offers anti-loosening performance without a complicated tightening process and tools. In this study, we investigated the mechanisms of joints bolted with the HLN, and tightening behavior was analyzed using the three-dimensional finite element method. The analytical results were compared with the experimental results for the HLN, and close qualitative agreement was observed between the two with respect to displacement, tightening force and tightening torque. We found a number of new aspects and plus points for joints bolted with the HLN in comparison to those fastened with JIS standard nuts. It was found that the tightening torque of the HLN is higher than that of JIS standard nuts, and that satisfactory anti-loosening performance can be realized through the thread contact force at the slit region and the angular face of the bearing surface.

Standard specification for anchor bolts, steel, 36, 55, and 105-ksi yield strength. ASTM standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-07-01

This specification is under the jurisdiction of ASTM Committee F-16 on Fasteners and is the direct responsibility of Subcommittee F16.02 on Steel Bolts, Nuts, Rivets, and Washers. Current edition approved Dec. 10, 1997 and published July 1998. Originally published as F 1554-94. Last previous edition was F 1554-94.

Simulation of friction stir drilling process

NASA Astrophysics Data System (ADS)

Vijayabaskar, P.; Hynes, N. Rajesh Jesudoss

2018-05-01

The project is the study of the thermal drilling process. The process is a hole forming process in the sheet metals using the heat generated by means of friction. The main advantage of the process over the conventional drilling process is that the holes formed using this process does not need any backing arrangements such as weld nuts, rivet nuts etc. Because the extruded bush itself acts as a supporting structure for the fasteners. This eliminates the need for the access to the backside of the work material for fastening operations. The major factors contributing the thermal drilling operation are the spindle speed and the thrust force required for forming a hole. The process of finding out the suitable thrust force and the speed for drilling a particular material with particular thickness is a tedious process. The process can be simplified by forming a mathematical model by combining the empirical formulae from the literature. These formulae were derived in the literature from the experimental trials by following certain assumptions. In this paper a suitable mathematical model is formed by replicating the experiments and tried to be validated by the results from numerical analysis. The numerical analysis of the model is done using the ANSYS software.

Results of tests of MTA-2 TPS on the SRB hold-down bolt blast container

NASA Technical Reports Server (NTRS)

Dean, W. G.

1982-01-01

The four solid rocket booster (SRB) hold-down posts are fastened to the mobile launch platform (MLP) with four large nuts. At liftoff the nuts are split with explosive changes to release the SRB/Shuttle. A blast container is placed over the nuts to protect the vehicle from flying debris. The blast container is a reusable part and has to be protected from aerodynamic heating during flight. The thermal protection system (TPS) used to protect these blast containers is cork. Fitting the flat cork sheet to this hemispherical shaped blast container is both time consuming and expensive. Another problem is removing the charred cork and epoxy glue from the blast containers. Replacements of this cork with another TPS material such as MTA-2 was examined. Heating rates along the centerline of the forward facing areas of the blast container were determined. The feasibility of using 1/2 in. MTA-2 on the SRB blast containers for protection from ascent, plume impingement and reentry heating is demonstrated.

3-Dimensional Analysis of Deformation of Disk Wheels and Transverse Force of Wheel Bolts

NASA Astrophysics Data System (ADS)

Kagiwada, Tadao; Harada, Hiroyuki

Loosening of the wheel nuts, which fix the disk wheels of automobiles to the wheel hub, may be the cause of accidents where the wheel falls off while the automobile is running. When the transverse force of wheel bolts exceeds a certain proportion of the bolt shaft force, the wheel nut begins to loosen. Further, the force on the bolt shaft may also be influenced by the loads acting to the wheel through the moment caused by the offset of the wheel. This study determined the 3-dimensional deformation of the disk wheels and the transverse forces on the wheel bolt by 3-dimensional numerical analysis. The results established that the transverse force was influenced by the bolt shaft force caused by the bolt fastening and was superposed on that due to the load, and that it fluctuated greatly during the revolution of the wheel. This phenomenon may be a large factor in the loosening of wheel nuts.

Source of the slippage in the universal joints of the Hoffmann external fixator.

PubMed

Drijber, F L; Finlay, J B; Moroz, T K; Rorabeck, C H

1990-01-01

An investigation was conducted to determine what improvements in the resistance to slippage could be obtained in selected interfaces (rod/clip torsional, cheek/bowl and cheek/clip) of the Hoffmann external fixator. The modification involved changing the standard wing-nut clamp for a bolt with a thread of 7 mm and a 1 mm pitch and placing an FAG 28-303 thrust-bearing (needle roller and cage assembly) between the bolt and the cheek. The results showed a significant improvement in the slippage values of all interfaces; increases of approximately six times were obtained at all torque values of the wing-nut clamp or fastener tested. Such improvements would markedly increase the reliability of external fixation systems and thus reduce the incidence of loss-of-reduction of fracture due to slippage of the universal joint.

HEXPANDO Expanding Head for Fastener-Retention Hexagonal Wrench

NASA Technical Reports Server (NTRS)

Bishop, John

2011-01-01

The HEXPANDO is an expanding-head hexagonal wrench designed to retain fasteners and keep them from being dislodged from the tool. The tool is intended to remove or install socket-head cap screws (SHCSs) in remote, hard-to-reach locations or in circumstances when a dropped fastener could cause damage to delicate or sensitive hardware. It is not intended for application of torque. This tool is made of two assembled portions. The first portion of the tool comprises tubing, or a hollow shaft, at a length that gives the user adequate reach to the intended location. At one end of the tubing is the expanding hexagonal head fitting with six radial slits cut into it (one at each of the points of the hexagonal shape), and a small hole drilled axially through the center and the end opposite the hex is internally and externally threaded. This fitting is threaded into the shaft (via external threads) and staked or bonded so that it will not loosen. At the other end of the tubing is a knurled collar with a through hole into which the tubing is threaded. This knob is secured in place by a stop nut. The second assembled portion of the tool comprises a length of all thread or solid rod that is slightly longer than the steel tubing. One end has a slightly larger knurled collar affixed while the other end is tapered/pointed and threaded. When the two portions are assembled, the all thread/rod portion feeds through the tubing and is threaded into the expanding hex head fitting. The tapered point allows it to be driven into the through hole of the hex fitting. While holding the smaller collar on the shaft, the user turns the larger collar, and as the threads feed into the fitting, the hex head expands and grips the SHCS, thus providing a safe way to install and remove fasteners. The clamping force retaining the SHCS varies depending on how far the tapered end is inserted into the tool head. Initial tests of the prototype tool, designed for a 5 mm or # 10SHCS have resulted in up to 8 lb (.35.6 N) of pull force to dislodge the SHCS from the tool. The tool is designed with a lead-in angle from the diameter of the tubing to a diameter the same as the fastener head, to prevent the fastener head from catching on any obstructions encountered that could dislodge the fastener during retrieval.

Modified locking thread form for fastener

NASA Technical Reports Server (NTRS)

Roopnarine, (Inventor); Vranish, John D. (Inventor)

1998-01-01

A threaded fastener has a standard part with a standard thread form characterized by thread walls with a standard included angle, and a modified part complementary to the standard part having a modified thread form characterized by thread walls which are symmetrically inclined with a modified included angle that is different from the standard included angle of the standard part's thread walls, such that the threads of one part make pre-loaded edge contact with the thread walls of the other part. The thread form of the modified part can have an included angle that is greater, less, or compound as compared to the included angle of the standard part. The standard part may be a bolt and the modified part a nut, or vice versa. The modified thread form holds securely even under large vibrational forces, it permits bi-directional use of standard mating threads, is impervious to the build up of tolerances and can be manufactured with a wider range of tolerances without loss of functionality, and distributes loading stresses (per thread) in a manner that decreases the possibility of single thread failure.

Protective interior wall and attach8ing means for a fusion reactor vacuum vessel

DOEpatents

Phelps, Richard D.; Upham, Gerald A.; Anderson, Paul M.

1988-01-01

An array of connected plates mounted on the inside wall of the vacuum vessel of a magnetic confinement reactor in order to provide a protective surface for energy deposition inside the vessel. All fasteners are concealed and protected beneath the plates, while the plates themselves share common mounting points. The entire array is installed with torqued nuts on threaded studs; provision also exists for thermal expansion by mounting each plate with two of its four mounts captured in an oversize grooved spool. A spool-washer mounting hardware allows one edge of a protective plate to be torqued while the other side remains loose, by simply inverting the spool-washer hardware.

Spline screw payload fastening system

NASA Technical Reports Server (NTRS)

Vranish, John M. (Inventor)

1993-01-01

A system for coupling an orbital replacement unit (ORU) to a space station structure via the actions of a robot and/or astronaut is described. This system provides mechanical and electrical connections both between the ORU and the space station structure and between the ORU and the ORU and the robot/astronaut hand tool. Alignment and timing features ensure safe, sure handling and precision coupling. This includes a first female type spline connector selectively located on the space station structure, a male type spline connector positioned on the orbital replacement unit so as to mate with and connect to the first female type spline connector, and a second female type spline connector located on the orbital replacement unit. A compliant drive rod interconnects the second female type spline connector and the male type spline connector. A robotic special end effector is used for mating with and driving the second female type spline connector. Also included are alignment tabs exteriorally located on the orbital replacement unit for berthing with the space station structure. The first and second female type spline connectors each include a threaded bolt member having a captured nut member located thereon which can translate up and down the bolt but are constrained from rotation thereabout, the nut member having a mounting surface with at least one first type electrical connector located on the mounting surface for translating with the nut member. At least one complementary second type electrical connector on the orbital replacement unit mates with at least one first type electrical connector on the mounting surface of the nut member. When the driver on the robotic end effector mates with the second female type spline connector and rotates, the male type spline connector and the first female type spline connector lock together, the driver and the second female type spline connector lock together, and the nut members translate up the threaded bolt members carrying the first type electrical connector up to the complementary second type connector for interconnection therewith.

Fasteners and fastening techniques: A compilation

NASA Technical Reports Server (NTRS)

1972-01-01

Technology on fasteners and fastening devices is presented, as part of NASA's TU program to provide technical information on devices, methods, and techniques resulting from aerospace research. The material is divided into two sections which include: (1) data concerning a selected group of fasteners and concept for fasteners such as locking devices, couplings, and connect and release mechanisms; and (2) discussions on a number of fastening techniques such as those for mounting panel lamps, clamping flange bolts, stretching fasteners, and transferring fuel from a tanker to another vehicle.

Quick connect fastener

NASA Technical Reports Server (NTRS)

Weddendorf, Bruce (Inventor)

1994-01-01

A quick connect fastener and method of use is presented wherein the quick connect fastener is suitable for replacing available bolts and screws, the quick connect fastener being capable of installation by simply pushing a threaded portion of the connector into a member receptacle hole, the inventive apparatus being comprised of an externally threaded fastener having a threaded portion slidably mounted upon a stud or bolt shaft, wherein the externally threaded fastener portion is expandable by a preloaded spring member. The fastener, upon contact with the member receptacle hole, has the capacity of presenting cylindrical threads of a reduced diameter for insertion purposes and once inserted into the receiving threads of the receptacle member hole, are expandable for engagement of the receptacle hole threads forming a quick connect of the fastener and the member to be fastened, the quick connect fastener can be further secured by rotation after insertion, even to the point of locking engagement, the quick connect fastener being disengagable only by reverse rotation of the mated thread engagement.

Self-locking threaded fasteners

DOEpatents

Glovan, Ronald J.; Tierney, John C.; McLean, Leroy L.; Johnson, Lawrence L.

1996-01-01

A threaded fastener with a shape memory alloy (SMA) coatings on its threads is disclosed. The fastener has special usefulness in high temperature applications where high reliability is important. The SMA coated fastener is threaded into or onto a mating threaded part at room temperature to produce a fastened object. The SMA coating is distorted during the assembly. At elevated temperatures the coating tries to recover its original shape and thereby exerts locking forces on the threads. When the fastened object is returned to room temperature the locking forces dissipate. Consequently the threaded fasteners can be readily disassembled at room temperature but remains securely fastened at high temperatures. A spray technique is disclosed as a particularly useful method of coating of threads of a fastener with a shape memory alloy.

Internal impacted screw-locking pellet

NASA Technical Reports Server (NTRS)

MacMartin, Malcolm J. (Inventor)

1994-01-01

An elongate fastener having an engaging surface engageable with an engaging surface of a fastener's mate includes a hole extending through a portion of the fastener and having a top opening and a bottom floor, a locking pellet disposed near the bottom floor, a discharge channel communicating between the pellet and through the engaging surface of the fastener and opening out toward the engaging surface of the fastener's mate, and an impact pin in the hole having a top portion protruding through the top opening and a bottom portion near the locking pellet, whereby the pin drives the locking pellet through the discharge channel against the engaging surfaces of the fastener and the fastener's mate whereby to lock the fastener against the fastener's mate.

Self-locking threaded fasteners

DOEpatents

Glovan, R.J.; Tierney, J.C.; McLean, L.L.; Johnson, L.L.

1996-01-16

A threaded fastener with a shape memory alloy (SMA) coatings on its threads is disclosed. The fastener has special usefulness in high temperature applications where high reliability is important. The SMA coated fastener is threaded into or onto a mating threaded part at room temperature to produce a fastened object. The SMA coating is distorted during the assembly. At elevated temperatures the coating tries to recover its original shape and thereby exerts locking forces on the threads. When the fastened object is returned to room temperature the locking forces dissipate. Consequently the threaded fasteners can be readily disassembled at room temperature but remains securely fastened at high temperatures. A spray technique is disclosed as a particularly useful method of coating of threads of a fastener with a shape memory alloy. 13 figs.

30 CFR 18.32 - Fastenings-additional requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... preclude improper assembly. (d) Holes for fastenings shall not penetrate to the interior of an explosion...-inch of stock shall be left at the center of the bottom of each hole drilled for fastenings. (f...-tensile strength fastening(s) specified by the applicant. (i) Coil-thread inserts, if used in holes for...

30 CFR 18.32 - Fastenings-additional requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... preclude improper assembly. (d) Holes for fastenings shall not penetrate to the interior of an explosion...-inch of stock shall be left at the center of the bottom of each hole drilled for fastenings. (f...-tensile strength fastening(s) specified by the applicant. (i) Coil-thread inserts, if used in holes for...

30 CFR 18.32 - Fastenings-additional requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... preclude improper assembly. (d) Holes for fastenings shall not penetrate to the interior of an explosion...-inch of stock shall be left at the center of the bottom of each hole drilled for fastenings. (f...-tensile strength fastening(s) specified by the applicant. (i) Coil-thread inserts, if used in holes for...

30 CFR 18.32 - Fastenings-additional requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... preclude improper assembly. (d) Holes for fastenings shall not penetrate to the interior of an explosion...-inch of stock shall be left at the center of the bottom of each hole drilled for fastenings. (f...-tensile strength fastening(s) specified by the applicant. (i) Coil-thread inserts, if used in holes for...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skochko, G.W.; Herrmann, T.P.

Axial load cycling fatigue tests of threaded fasteners are useful in determining fastener fatigue failure or design properties. By using appropriate design factors between the failure and design fatigue strengths, such tests are used to establish fatigue failure and design parameters of fasteners for axial and bending cyclic load conditions. This paper reviews the factors which influence the fatigue strength of low Alloy steel threaded fasteners, identifies those most significant to fatigue strength, and provides design guidelines based on the direct evaluation of fatigue tests of threaded fasteners. Influences on fatigue strength of thread manufacturing process (machining and rolling ofmore » threads), effect of fastener membrane and bending stresses, thread root radii, fastener sizes, fastener tensile strength, stress relaxation, mean stress, and test temperature are discussed.« less

Analysis of composite laminates with multiple fasteners by boundary collocation technique

NASA Astrophysics Data System (ADS)

Sergeev, Boris Anatolievich

Mechanical fasteners remain the primary means of load transfer between structural components made of composite laminates. As, in pursuit of increasing efficiency of the structure, the operational load continues to grow, the load carried by each fastener increases accordingly. This accelerates initiation of fatigue-related cracks near the fasteners holes and increases probability of failure. Therefore, the assessment of the stresses around the fastener holes and the stress intensity factors associated with edge cracks becomes critical for damage-tolerant design. Because of the presence of unknown contact stresses and the contact region between the fastener and the laminate, the analysis of a pin-loaded hole becomes considerably more complex than that of a traction-free hole. The accurate prediction of the contact stress distribution along the hole boundary is critical for determining the stress intensity factors and is essential for reliable strength evaluation and failure prediction. This study concerns the development of an analytical methodology, based on the boundary collocation technique, to determine the contact stresses and stress intensity factors required for strength and life prediction of bolted joints with many fasteners. It provides an analytical capability for determining the non-linear contact stresses in mechanically fastened composite laminates while capturing the effects of finite geometry, presence of edge cracks, interaction among fasteners, material anisotropy, fastener flexibility, fastener-hole clearance, friction between the pin and the laminate, and by-pass loading. Also, the proposed approach permits the determination of the fastener load distribution, which significantly influences the failure load of a multi-fastener joint. The well known phenomenon of the fastener tightening torque (clamping force) influence on the load distribution among the different fastener in a multi-fastener joints is taken into account by means of bi-linear representation of the elastic fastener deflection. Finally, two different failure criteria, maximum strains averaged over the characteristic distances and Tsai-Wu criterion, were used to predict the failure load and failure mode in two composite-aluminum joints. The comparison of the present predictions with the published experimental results reveals their agreement.

Fastener Design Manual

NASA Technical Reports Server (NTRS)

Barrett, Richard T.

1990-01-01

This manual was written for design engineers to enable them to choose appropriate fasteners for their designs. Subject matter includes fastener material selection, platings, lubricants, corrosion, locking methods, washers, inserts, thread types and classes, fatigue loading, and fastener torque. A section on design criteria covers the derivation of torque formulas, loads on a fastener group, combining simultaneous shear and tension loads, pullout load for tapped holes, grip length, head styles, and fastener strengths. The second half of this manual presents general guidelines and selection criteria for rivets and lockbolts.

Separable fastening device

DOEpatents

Harvey, Andrew C.; Ribich, William A.; Marinaccio, Paul J.; Sawaf, Bernard E.

1987-12-01

A separable fastener system has a first separable member that includes a series of metal hook sheets disposed in stacked relation that defines an array of hook elements on its broad surface. Each hook sheet is a planar metal member of uniform thickness and has a body portion with a series of hook elements formed along one edge of the body. Each hook element includes a stem portion, a deflecting surface portion, and a latch portion. Metal spacer sheets are disposed between the hook sheets and may be varied in thickness and in number to control the density of the hook elements on the broad surface of the first fastener member. The hook and spacer sheets are secured together in stacked relation. A second fastener member has a surface of complementary engaging elements extending along its broad surface which are releasably interengageable with the hook elements of the first fastener member, the deflecting surfaces of the hook elements of the first fastener member tending to deflect hook engaging portions of the second fastener member and the latch portions of the hook elements of the first fastener member engaging portions of the second fastener member in fastening relation.

RFID Torque Sensing Tag System for Fasteners

NASA Technical Reports Server (NTRS)

Fink, Patrick W. (Inventor); Lin, Gregory Y. (Inventor); Ngo, Phong H. (Inventor); Kennedy, Timothy F. (Inventor)

2016-01-01

The present invention provides an RFID-based torque sensor that can be used to quickly monitor off the shelf fasteners including fasteners that are used in expensive satellites or other uses where fastener failure can be very costly. In one embodiment, an antenna, RFID ring and spring comprise a sensor tag that can be interrogated with an interrogation signal produced by an interrogator device. When sufficient torque is applied to the fastener, an RFID circuit is connected, and produces a radio frequency (RF) signal that can be read by the interrogator. In one embodiment, the RFID circuit does not transmit when the spring member is not compressed, thereby indicating insufficient tensioning of the fastener. The present invention offers the ability to remotely, quickly, and inexpensively verify that any number of fasteners are torqued properly upon initial installation. Where applicable, the present invention allows low cost monitoring over the life of the fastener.

Investigation of threaded fastener structural integrity

NASA Technical Reports Server (NTRS)

1977-01-01

Technical nondestructive evaluation approaches to the determination of fastener integrity were assessed. Existing instruments and methods used to measure stress or strain were examined, with particular interest in fastener shank stress. Industry procedures being followed were evaluated to establish fastener integrity criteria.

Lunar rated fasteners

NASA Technical Reports Server (NTRS)

Gupton, Lindsey; Hyde, Steve; Mckillip, Dan; Player, Bryan; Smith, Greg

1988-01-01

A catalog of fasteners is presented for a variety of applications to be used in a lunar environment. The fastening applications targeted include: covers, panels, hatches, bearings, wheels, gears, pulleys, anchors for the lunar surface and structural fasteners (general duty preloadable). The robotic installation and removal of each fastener is presented along with a discussion of failure modes. Structural performance data is tabulated for various configurations. Potential materials for the space environment are presented along with recommendations of appropriate solid film lubricants. Three original fastener designs were found suitable for the lunar environment. A structural analysis is presented for each original design.

Two fault tolerant toggle-hook release

NASA Technical Reports Server (NTRS)

Graves, Thomas Joseph (Inventor); Brown, Christopher William (Inventor)

1991-01-01

A coupling device is disclosed which is mechanically two fault tolerant for release. The device comprises a fastener plate and fastener body, each of which is attachable to a different one of a pair of structures to be joined. The fastener plate and body are coupled by an elongate toggle mounted at one end in a socket on the fastener plate for universal pivotal movement thereon. The other end of the toggle is received in an opening in the fastener body and adapted for limited pivotal movement therein. The toggle is adapted to be restrained by three latch hooks arranged in symmetrical equiangular spacing about the axis of the toggle, each hook being mounted on the fastener body for pivotal movement between an unlatching non-contact position with respect to the toggle and a latching position in engagement with a latching surface of the toggle. The device includes releasable lock means for locking each latch hook in its latching position whereby the toggle couples the fastener plate to the fastener body and means for releasing the lock means to unlock each said latch hook from the latch position whereby the unlocking of at least one of the latch hooks from its latching position results in the decoupling of the fastener plate from the fastener body.

Theoretical basis for design of thermal-stress-free fasteners

NASA Technical Reports Server (NTRS)

Blosser, M. L.; Mcwithey, R. R.

1983-01-01

A theoretical basis was developed for the design of fasteners which are free of thermal stress. A fastener can be shaped to eliminate the thermal stress which would otherwise result from differential thermal expansion between dissimilar fastener and sheet materials for many combinations of isotropic and orthotropic materials. The resulting joint remains snug, yet free of thermal stress at any temperature, if the joint is uniform in temperature, if it is frictionless, and if the coefficients of thermal expansion of the materials do not change with temperature. In general, such a fastener has curved sides; however, if both materials have isotropic coefficients of thermal expansion, a conical fastener is free of thermal stress. Equations are presented for thermal stress free shapes at both initial and final temperature, and typical fastener shapes are shown.

The effect of fatigue cracks on fastener flexibility, load distribution, and fatigue crack growth

NASA Astrophysics Data System (ADS)

Whitman, Zachary Layne

Fatigue cracks typically occur at stress risers such as geometry changes and holes. This type of failure has serious safety and economic repercussions affecting structures such as aircraft. The need to prevent catastrophic failure due to fatigue cracks and other discontinuities has led to durability and damage tolerant methodologies influencing the design of aircraft structures. Holes in a plate or sheet filled with a fastener are common fatigue critical locations in aircraft structure requiring damage tolerance analysis (DTA). Often, the fastener is transferring load which leads to a loading condition involving both far-field stresses such as tension and bending, and localized bearing at the hole. The difference between the bearing stress and the tensile field at the hole is known as load transfer. The ratio of load transfer as well as the magnitude of the stresses plays a significant part in how quickly a crack will progress to failure. Unfortunately, the determination of load transfer in a complex joint is far from trivial. Many methods exist in the open literature regarding the analysis of splices, doublers and attachment joints to determine individual fastener loads. These methods work well for static analyses but greater refinement is needed for crack growth analysis. The first fastener in a splice or joint is typically the most critical but different fastener flexibility equations will all give different results. The constraint of the fastener head and shop end, along with the type of fastener, affects the stiffness or flexibility of the fastener. This in turn will determine the load that the fastener will transfer within a given fastener pattern. However, current methods do not account for the change in flexibility at a fastener as the crack develops. It is put forth that a crack does indeed reduce the stiffness of a fastener by changing its constraint, thus lessening the load transfer. A crack growth analysis utilizing reduced load transfer will result in a slower growing crack versus an analysis that ignores the effect.

Thermal-stress-free fasteners for joining orthotropic materials

NASA Technical Reports Server (NTRS)

Blosser, M. L.

1987-01-01

Hot structures fabricated from orthotropic materials are an attractive design option for future high speed vehicles. Joining subassemblies of these materials with standard cylindrical fasteners can lead to loose joints or highly stressed joints due to thermal stress. A method has been developed to eliminate thermal stresses and maintain a tight joint by shaping the fastener and mating hole. This method allows both materials (fastener and structure), with different coefficients of thermal expansion (CTEs) in each of the three material directions, to expand freely with temperature yet remain in contact. For the assumptions made in the analysis, the joint will remain snug, yet free of thermal stress at any temperature. Finite element analysis was used to verify several thermal-stress-free fasteners and to show that conical fasteners, which are thermal-stress-free for isotropic materials, can reduce thermal stresses for transversely isotropic materials compared to a cylindrical fastener. Equations for thermal-stress-free shapes are presented and typical fastener shapes are shown.

The Experiment and Numerical Simulation of Composite Countersunk-head Fasteners Pull-through Mechanical Behavior

NASA Astrophysics Data System (ADS)

Mu, Junwu; Guan, Zhidong; Bian, Tianya; Li, Zengshan; Wang, Kailun; Liu, Sui

2014-10-01

Fasteners made of the anisotropic carbon/carbon (C/C) composite material have been developed for joining C/C composite material components in the high-temperature environment. The fastener specimens are fabricated from the C/C composites which are made from laminated carbon cloths with Z-direction carbon fibers being punctured as perform. Densification process cycles such as the thermal gradient chemical vapor infiltration (CVI) technology were repeated to obtain high density C/C composites fastener. The fasteners were machined parallel to the carbon cloths (X-Y direction). A method was proposed to test pull-through mechanical behavior of the countersunk-head C/C composite material fasteners. The damage morphologies of the fasteners were observed through the charge coupled device (CCD) and the scanning electron microscope (SEM). The internal micro-structure were observed through the high-resolution Mirco-CT systems. Finally, an excellent simulation of the C/C composite countersunk-head fasteners were performed with the finite element method (FEM), in which the damage evolution model of the fastener was established based on continuum damage mechanics. The simulation is correspond well with the test result . The damage evolution process and the relation between the countersunk depth and the ultimate load was investigated.

76 FR 45540 - Fastener Quality Act Insignia Recordal Process

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... DEPARTMENT OF COMMERCE United States Patent and Trademark Office Fastener Quality Act Insignia... Fastener Quality Act of 1999 (FQA), 15 U.S.C. 5401 et seq., certain industrial fasteners must bear an... Quality Act (PTO-1611), which provides manufacturers with a convenient way to [[Page 45541

Evaluation of replacement thread lubricants for red lead and graphite in mineral oil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jungling, T.L.; Rauth, D.R.; Goldberg, D.

1998-04-30

Eight commercially available thread lubricants were evaluated to determine the best replacement for Red Lead and Graphite in Mineral Oil (RLGMO). The evaluation included coefficient of friction testing, high temperature anti-seizing testing, room temperature anti-galling testing, chemical analysis for detrimental impurities, corrosion testing, off-gas testing, and a review of health and environmental factors. The coefficient of friction testing covered a wide variety of factors including stud, nut, and washer materials, sizes, manufacturing methods, surface coatings, surface finishes, applied loads, run-in cycles, and relubrication. Only one lubricant, Dow Corning Molykote P37, met all the criteria established for a replacement lubricant. Itmore » has a coefficient of friction range similar to RLGMO. Therefore, it can be substituted directly for RLGMO without changing the currently specified fastener torque values for the sizes, materials and conditions evaluated. Other lubricants did not perform as well as Molykote P37 in one or more test or evaluation categories.« less

Push/Push Fastener

NASA Technical Reports Server (NTRS)

Jackson, Steven A.

1996-01-01

Modified version of Nylatch (or equivalent) commerical quick-connect/quick-disconnect fastener for joining flat panels. Fastener tightened by pushing on knob on one side and loosened by pushing on knob on other side. Push/push operation of fastener advantageous in cold or otherwise hostile environments where gloves worn, in underwater operations, or if person handicapped.

Titanium fasteners. [for aircraft industry

NASA Technical Reports Server (NTRS)

Phillips, J. L.

1972-01-01

Titanium fasteners are used in large quantities throughout the aircraft industry. Most of this usage is in aluminum structure; where titanium structure exists, titanium fasteners are logically used as well. Titanium fasteners offer potential weight savings to the designer at a cost of approximately $30 per pound of weight saved. Proper and least cost usage must take into consideration type of fastener per application, galvanic couples and installation characteristics of protective coatings, cosmetic appearance, paint adhesion, installation forces and methods available and fatigue performance required.

Stress corrosion resistant fasteners

NASA Technical Reports Server (NTRS)

Roach, T. A.

1985-01-01

A family of high performance aerospace fasteners made from corrosion resistant alloys for use in applications where corrosion and stress-corrosion cracking are of major concern are discussed. The materials discussed are mainly A-286, Inconel 718, MP35N and MP159. Most of the fasteners utilize cold worked and aged materials to achieve the desired properties. The fasteners are unique in that they provide a combination of high strength and immunity to stress corrosion cracking not previously attainable. A discussion of fastener stress corrosion failures is presented including a review of the history and a description of the mechanism. Case histories are presented to illustrate the problems which can arise when material selection is made without proper regard for the environmental conditions. Mechanical properties and chemical compositions are included for the fasteners discussed. Several aspects of the application of high performance corrosion resistant fasteners are discussed including galvanic compatibility and torque-tension relationships.

21 CFR 888.3040 - Smooth or threaded metallic bone fixation fastener.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Smooth or threaded metallic bone fixation fastener... metallic bone fixation fastener. (a) Identification. A smooth or threaded metallic bone fixation fastener..., slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a...

21 CFR 888.3040 - Smooth or threaded metallic bone fixation fastener.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Smooth or threaded metallic bone fixation fastener... metallic bone fixation fastener. (a) Identification. A smooth or threaded metallic bone fixation fastener..., slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a...

21 CFR 888.3040 - Smooth or threaded metallic bone fixation fastener.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Smooth or threaded metallic bone fixation fastener... metallic bone fixation fastener. (a) Identification. A smooth or threaded metallic bone fixation fastener..., slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a...

21 CFR 888.3040 - Smooth or threaded metallic bone fixation fastener.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Smooth or threaded metallic bone fixation fastener... metallic bone fixation fastener. (a) Identification. A smooth or threaded metallic bone fixation fastener..., slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a...

21 CFR 888.3040 - Smooth or threaded metallic bone fixation fastener.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Smooth or threaded metallic bone fixation fastener... metallic bone fixation fastener. (a) Identification. A smooth or threaded metallic bone fixation fastener..., slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a...

29 CFR 1915.72 - Ladders.

Code of Federal Regulations, 2013 CFR

2013-07-01

... shipbreaking. (a) General requirements. (1) The use of ladders with broken or missing rungs or steps, broken or... 10d common wire nails or fastened with through bolts or other fasteners of equivalent strength. Cleats... nailed to each rail with five 10d common wire nails or fastened with through bolts or other fasteners of...

Derivation and test of elevated temperature thermal-stress-free fastener concept

NASA Technical Reports Server (NTRS)

Sawyer, J. W.; Blosser, M. L.; Mcwithey, R. R.

1985-01-01

Future aerospace vehicles must withstand high temperatures and be able to function over a wide temperature range. New composite materials are being developed for use in designing high-temperature lightweight structures. Due to the difference between coefficients of thermal expansion for the new composite materials and conventional high-temperature metallic fasteners, innovative joining techniques are needed to produce tight joints at all temperatures without excessive thermal stresses. A thermal-stress-free fastening technique is presented that can be used to provide structurally tight joints at all temperatures even when the fastener and joined materials have different coefficients of thermal expansion. The derivation of thermal-stress-free fasteners and joint shapes is presented for a wide variety of fastener materials and materials being joined together. Approximations to the thermal-stress-free shapes that result in joints with low-thermal-stresses and that simplify the fastener/joint shape are discussed. The low-thermal-stress fastener concept is verified by thermal and shear tests in joints using oxide-dispersion-strengthened alloy fasteners in carbon-carbon material. The test results show no evidence of thermal stress damage for temperatures up to 2000 F and the resulting joints carried shear loads at room temperature typical of those for conventional joints.

26 CFR 48.4073-2 - Exemption of tires with internal wire fastening.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Exemption of tires with internal wire fastening... internal wire fastening. The tax does not apply to sales of tires of any size or dimension manufactured from extruded tiring that is fastened or held together by means of internal wire or other metallic...

26 CFR 48.4073-2 - Exemption of tires with internal wire fastening.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 16 2011-04-01 2011-04-01 false Exemption of tires with internal wire fastening... internal wire fastening. The tax does not apply to sales of tires of any size or dimension manufactured from extruded tiring that is fastened or held together by means of internal wire or other metallic...

Apparatus For Eddy-Current Inspection Of Bolts

NASA Technical Reports Server (NTRS)

Amos, Jay M.

1994-01-01

Eddy-current apparatus for inspection of bolts, studs, and other threaded fasteners detects flaws in threads, shanks, and head fillets. With help of apparatus, technician quickly inspects fasteners of various dimensions. Accommodates fasteners with diameters from 0.190 in. to 1 in. and with lengths up to 5 in. Basic design modified to accommodate fasteners of other sizes.

Development of high temperature fasteners using directionally solidified eutectic alloys

NASA Technical Reports Server (NTRS)

George, F. D.

1972-01-01

The suitability of the eutectics for high temperature fasteners was investigated. Material properties were determined as a function of temperature, and included shear parallel and perpendicular to the growth direction and torsion parallel to it. Techniques for fabricating typical fastener shapes included grinding, creep forming, and direct casting. Both lamellar Ni3Al-Ni3Nb and fibrous (Co,Cr,Al)-(Cr,Co)7C3 alloys showed promise as candidate materials for high temperature fastener applications. A brief evaluation of the performance of the best fabricated fastener design was made.

Composite fastener for use in high temperature environments

NASA Technical Reports Server (NTRS)

Miller, Robert J. (Inventor); Palusis, Mark E. (Inventor); Jarmon, David C. (Inventor)

2000-01-01

A fastener includes a composite body and a metal coupling attached to the body. The metal coupling includes an attachment structure to connect the fastener to an external structure. An assembly of components includes a first metallic component having a first coefficient of thermal expansion, a second non-metallic component having a second coefficient of thermal expansion different from the first thermal expansion and having a groove that receives a fastener that extends between the groove and the second component, the fastener slidably engaging the groove to accommodate relative expansion between the components.

Corrosion rates of fasteners in treated wood exposed to 100% relative humidity

Treesearch

Samuel L. Zelinka; Douglas R. Rammer

2009-01-01

In the past, gravimetric corrosion data for fasteners exposed to treated wood has been reported as a percent weight loss. Although percent weight loss is a valid measure of corrosion for comparing identical fasteners, it can distort the corrosion performance of fasteners with different geometries and densities. This report reevaluates a key report on the corrosiveness...

Double swivel toggle release

NASA Technical Reports Server (NTRS)

King, Guy L.; Schneider, William C.

1989-01-01

A pyrotechnic actuated structural release device is disclosed which is mechanically two fault tolerant for release. The device comprises a fastener plate and fastener body each attachable to one of a pair of structures to be joined. The fastener plate and the fastener body are fastened by a dual swivel toggle member. The toggle member is supported at one end on the fastener plate and mounted for universal pivotal movement thereon. Its other end is received in a central opening in the fastener body, and has a universally mounted retainer ring member. The toggle member is restrained by three retractable latching pins symmetrically disposed in equiangular spacing about the axis of the toggle member and positionable in latching engagement with the retainer ring member on the toggle member. Each pin is retractable by a pyrotechnic charge, the expanding gases of which are applied to a pressure receiving face on the latch pins to effect retraction from the ring member. While retraction of all three pins releases the ring member, the fastener is mechanically two fault tolerant since the failure of any single one or pair of the latch pins to retract results in an asymmetrical loading on the ring member and its dual pivotal movement ensures a release.

Welding, Bonding and Fastening, 1984

NASA Technical Reports Server (NTRS)

Buckley, J. D. (Editor); Stein, B. A. (Editor)

1985-01-01

A compilation of papers presented in a joint NASA, American Society for Metals, The George Washington University, American Welding Soceity, and Society of Manufacturing Engineers conference on Welding, Bonding, and Fastening at Langley Research Center, Hampton, VA, on October 23 to 25, 1984 is given. Papers were presented on technology developed in current research programs relevant to welding, bonding, and fastening of structural materials required in fabricating structures and mechanical systems used in the aerospace, hydrospace, and automotive industries. Topics covered in the conference included equipment, hardware and materials used when welding, brazing, and soldering, mechanical fastening, explosive welding, use of unique selected joining techniques, adhesives bonding, and nondestructive evaluation. A concept of the factory of the future was presented, followed by advanced welding techniques, automated equipment for welding, welding in a cryogenic atmosphere, blind fastening, stress corrosion resistant fasteners, fastening equipment, explosive welding of different configurations and materials, solid-state bonding, electron beam welding, new adhesives, effects of cryogenics on adhesives, and new techniques and equipment for adhesive bonding.

International concrete crosstie and fastening system survey.

DOT National Transportation Integrated Search

2013-02-01

The International Concrete Crosstie and : Fastening System Survey assesses the : international railway industrys state of practice : regarding concrete crossties and fastening : system design, performance, and research : needs. The Rail Transporta...

The Alcoa ram fastener: A reusable blind rivet

NASA Technical Reports Server (NTRS)

Dewalt, W. J.

1972-01-01

Results of tensile, shear, fatigue and accelerated weathering tests are presented for the ram fastener, a reusable, single unit blind rivet. The effects of variations in hole size, grip length and sheet thickness on strength properties of the fastener were determined. The test results show these fasteners to have strength characteristics suitable for light structural applications. Exposure to accelerated weathering did not impair their performance.

International concrete crosstie and fastening system survey.

DOT National Transportation Integrated Search

2013-02-01

The International Concrete Crosstie and Fastening System Survey assesses the international railway industrys state of practice regarding concrete crossties and fastening system design, performance, and research needs. The Rail Transportation and E...

Measuring the surface area of fasteners

Treesearch

Douglas R. Rammer; Samuel L. Zelinka

2011-01-01

New product provides a easy way for companies to identify the surface area of threaded and nonthreaded fasteners, especially as changes in wood preservative treatments act to accelerate metal fastener corrosion in wood.

21 CFR 882.5360 - Cranioplasty plate fastener.

Code of Federal Regulations, 2011 CFR

2011-04-01

... fastener. (a) Identification. A cranioplasty plate fastener is a screw, wire, or other article made of tantalum, vitallium, or stainless steel used to secure a plate to the patient's skull to repair a skull...

21 CFR 882.5360 - Cranioplasty plate fastener.

Code of Federal Regulations, 2010 CFR

2010-04-01

... fastener. (a) Identification. A cranioplasty plate fastener is a screw, wire, or other article made of tantalum, vitallium, or stainless steel used to secure a plate to the patient's skull to repair a skull...

Spline-Locking Screw Fastening Strategy (SLSFS)

NASA Technical Reports Server (NTRS)

Vranish, John M.

1991-01-01

A fastener was developed by NASA Goddard for efficiently performing assembly, maintenance, and equipment replacement functions in space using either robotic or astronaut means. This fastener, the 'Spline Locking Screw' (SLS) would also have significant commercial value in advanced manufacturing. Commercial (or DoD) products could be manufactured in such a way that their prime subassemblies would be assembled using SLS fasteners. This would permit machines and robots to disconnect and replace these modules/parts with ease, greatly reducing life cycle costs of the products and greatly enhancing the quality, timeliness, and consistency of repairs, upgrades, and remanufacturing. The operation of the basic SLS fastener is detailed, including hardware and test results. Its extension into a comprehensive fastening strategy for NASA use in space is also outlined. Following this, the discussion turns toward potential commercial and government applications and the potential market significance of same.

Spline-locking screw fastening strategy

NASA Technical Reports Server (NTRS)

Vranish, John M.

1992-01-01

A fastener was developed by NASA Goddard for efficiently performing assembly, maintenance, and equipment replacement functions in space using either robotics or astronaut means. This fastener, the 'Spline Locking Screw' (SLS) would also have significant commercial value in advanced space manufacturing. Commercial (or DoD) products could be manufactured in such a way that their prime subassemblies would be assembled using SLS fasteners. This would permit machines and robots to disconnect and replace these modules/parts with ease, greatly reducing life cycle costs of the products and greatly enhancing the quality, timeliness, and consistency of repairs, upgrades, and remanufacturing. The operation of the basic SLS fastener is detailed, including hardware and test results. Its extension into a comprehensive fastening strategy for NASA use in space is also outlined. Following this, the discussion turns toward potential commercial and government applications and the potential market significance of same.

Online Condition Monitoring of a Rail Fastening System on High-Speed Railways Based on Wavelet Packet Analysis

PubMed Central

Wei, Jiahong; Liu, Chong; Ren, Tongqun; Liu, Haixia; Zhou, Wenjing

2017-01-01

The rail fastening system is an important part of a high-speed railway track. It is always critical to the operational safety and comfort of railway vehicles. Therefore, the condition detection of the rail fastening system, looseness or absence, is an important task in railway maintenance. However, the vision-based method cannot identify the severity of rail fastener looseness. In this paper, the condition of rail fastening system is monitored based on an automatic and remote-sensing measurement system. Meanwhile, wavelet packet analysis is used to analyze the acceleration signals, based on which two damage indices are developed to locate the damage position and evaluate the severity of rail fasteners looseness, respectively. To verify the effectiveness of the proposed method, an experiment is performed on a high-speed railway experimental platform. The experimental results show that the proposed method is effective to assess the condition of the rail fastening system. The monitoring system significantly reduces the inspection time and increases the efficiency of maintenance management. PMID:28208732

Easy insert, easy release toggle bolt fastener

NASA Technical Reports Server (NTRS)

Kubokawa, C. C.

1970-01-01

Releasable pin-type toggle bolt fastener is constructed so that, when positioned in hole, toggle action prevents its removal and locknut anchors it firmly in place. Fastener is easily removed by loosening locknut and retraction of toggle wings.

Concrete crosstie fastener sub-system testing and modeling.

DOT National Transportation Integrated Search

2014-02-10

The primary objective of this project is to identify methods of improving concrete railroad crosstie fastening system design and performance by conducting a thorough investigation of the behavior of the fastening system using Finite Element Analysis ...

Current and Future Applications of Mechanical Fasteners for Light-Frame Wood Structures: Proceedings of Mechanical Fasteners Plenary Session at the Forest Products Research Society Annual Meeting

Treesearch

Leslie H. Groom; [Compiler

1993-01-01

The title of this publication-"Current and Future Applications of Mechanical Fasteners for Light-Frame Wood Structures" is the theme of this plenary session from the 1991 annual meeting of the Forest Products Research Society (FPRS). This theme was chosen to address current issues in the forest products industry: changing design codes, fastener performance,...

"Easy-on, Easy-off" Blanket Fastener

NASA Technical Reports Server (NTRS)

Kolecki, Ronald E.; Clatterbuck, Carroll H.

1992-01-01

Fasteners hold flexible blanket on set of posts on supporting structure. Disk of silicone rubber cast on disk of Mylar, fastened to blanket and press-fit over post to nest securely in groove. No tools needed for installation or removal.

Conceptual Design Study on Bolts for Self-Loosing Preventable Threaded Fasteners

NASA Astrophysics Data System (ADS)

Noma, Atsushi; He, Jianmei

2017-11-01

Threaded fasteners using bolts is widely applied in industrial field as well as various fields. However, threaded fasteners using bolts have loosing problems and cause many accidents. In this study, the purpose is to obtain self-loosing preventable threaded fasteners by applying spring characteristic effects on bolt structures. Helical-cutting applied bolt structures is introduced through three dimensional (3D) CAD modeling tools. Analytical approaches for evaluations on the spring characteristic effects helical-cutting applied bolt structures and self-loosing preventable performance of threaded fasteners were performed using finite element method and results are reported. Comparing slackness test results with analytical results and more details on evaluating mechanical properties will be executed in future study.

Discrimination between Fatigue Cracking and Mechanical Damage in Aircraft Fastener Holes by Eddy-Current Phase Rotation

DTIC Science & Technology

2016-08-01

present work, a systematic BHEC and fractographic study has been conducted by inspecting several hundred fastener holes in ex-service F/A- 18 ...BHEC and fractographic study was conducted by inspecting several hundred fastener holes in ex-service F/A- 18 aircraft bulkheads, following fatigue...study is based on BHEC inspections of several hundred fastener holes in ex-service F/A- 18 aircraft bulkheads. These Al-alloy bulkheads contained

Quick-Change Anode for Plating

NASA Technical Reports Server (NTRS)

Beasley, J. L.

1987-01-01

Proposed fastener for attaching electroplating anode improves quality of plating and increases productivity. Notches in twist-lock fastener mates with projections on end of anode bar. Fastener made of titanium for compatibility with copper-plating solution. Also constructed in snap-on, snap-off configuration.

40 CFR 420.121 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... operations. (e) The term strip, sheet, and miscellaneous products means steel products other than wire products and fasteners. (f) The term wire products and fasteners means steel wire, products manufactured from steel wire, and steel fasteners manufactured from steel wire or other steel shapes. ...

40 CFR 420.121 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... operations. (e) The term strip, sheet, and miscellaneous products means steel products other than wire products and fasteners. (f) The term wire products and fasteners means steel wire, products manufactured from steel wire, and steel fasteners manufactured from steel wire or other steel shapes. ...

14 CFR 23.607 - Fasteners.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fasteners. 23.607 Section 23.607 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... would preclude continued safe flight and landing. (b) Fasteners and their locking devices must not be...

14 CFR 23.607 - Fasteners.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fasteners. 23.607 Section 23.607 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... would preclude continued safe flight and landing. (b) Fasteners and their locking devices must not be...

The Effect of Fatigue Cracks on Fastener Flexibility, Load Distribution and Fatigue Crack Growth

DTIC Science & Technology

2012-05-01

fastener will transfer within a given fastener pattern. iv iv However, current methods do not account for the change in flexibility at a fastener...affects the growth of the crack. Thus, as the effect of the crack starts to impact the load transfer of the joint there is a need to account for...not account for spectrum loading but typically were cycled from 1g to limit or maximum flight load and then correlated to measured usage using

Simplified failure sequence evaluation of reactor pressure vessel head corroding in-core instrumentation assembly

DOE Office of Scientific and Technical Information (OSTI.GOV)

McVicker, J.P.; Conner, J.T.; Hasrouni, P.N.

1995-11-01

In-Core Instrumentation (ICI) assemblies located on a Reactor Pressure Vessel Head have a history of boric acid leakage. The acid tends to corrode the nuts and studs which fasten the flanges of the assembly, thereby compromising the assembly`s structural integrity. This paper provides a simplified practical approach in determining the likelihood of an undetected progressing assembly stud deterioration, which would lead to a catastrophic loss of reactor coolant. The structural behavior of the In-Core Instrumentation flanged assembly is modeled using an elastic composite section assumption, with the studs transmitting tension and the pressure sealing gasket experiencing compression. Using the abovemore » technique, one can calculate the flange relative deflection and the consequential coolant loss flow rate, as well as the stress in any stud. A solved real life example develops the expected failure sequence and discusses the exigency of leak detection for safe shutdown. In the particular case of Calvert Cliffs Nuclear Power Plant (CCNPP) it is concluded that leak detection occurs before catastrophic failure of the ICI flange assembly.« less

15 CFR 280.201 - Violations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... order issued thereunder. (b) Sale of fasteners. It shall be unlawful for a manufacturer or distributor, in conjunction with the sale or offer for sale of fasteners from a single lot, to knowingly..., characteristics, properties, mechanical or performance marks, chemistry, or strength of the lot of fasteners; or...

15 CFR 280.201 - Violations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... order issued thereunder. (b) Sale of fasteners. It shall be unlawful for a manufacturer or distributor, in conjunction with the sale or offer for sale of fasteners from a single lot, to knowingly..., characteristics, properties, mechanical or performance marks, chemistry, or strength of the lot of fasteners; or...

78 FR 66989 - Designation of Six Individuals and Four Entities Pursuant to Executive Order 13581, “Blocking...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

... 86483143 (Russia); Public Registration Number 1087746669845 (Russia) [TCO]. 2. FASTEN TOURISM LLC (a.k.a. FASTEN TOURISM DUBAI; a.k.a. FASTEN TOURS LLC), P.O. Box 19583, Dubai, United Arab Emirates; 171 Omar Ibn...

Lock-pin and collar fastening system : final report.

DOT National Transportation Integrated Search

1997-02-01

In 1993, a steel girder I-beam deck was extended to cross a new on-ramp at the Marquam Bridge Interchange in Portland, Oregon. The steel members of this new structure were fastened together using the lock-pin and collar fastening system. : These fast...

Reusable captive blind fastener

NASA Technical Reports Server (NTRS)

Peterson, S. A. (Inventor)

1981-01-01

A one piece reusable fastener capable of joining materials together from one side (blind backside) comprises a screw driven pin ending in a wedge-shaped expander cone. The cone cooperates within a slotted collar end which has a number of tangs on a cylindrical body. The fastener is set by inserting it through aligned holes in the workpieces to be joined. Turning the pin in one direction draws the cone into the collar, deforming the tangs radially outward to mate with tapered back-tapered hold in the workpiece, thus fastening the two pieces together. Reversing the direction of the pin withdraws the cone from the collar, and allows the tangs to resume their contracted configuration without withdrawing the fastener from the insertion hole. The fastener is capable of joining materials together from only one side with substantial strength in tension and shear over many resue attachment cycles, with no special operations on the main assembly parts other than the tapering of the back end of the insertion hole.

78 FR 46536 - Airworthiness Directives; Airbus Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

... eddy current inspection of the fastener holes for defects and repair if necessary. We are proposing... also includes doing a high frequency eddy current inspection of the fastener holes for defects and... frequency eddy current inspection of the fastener holes for defects and all applicable repairs, in...

A structural health monitoring fastener for tracking fatigue crack growth in bolted metallic joints

NASA Astrophysics Data System (ADS)

Rakow, Alexi Schroder

Fatigue cracks initiating at fastener hole locations in metallic components are among the most common form of airframe damage. The fastener hole site has been surveyed as the second leading initiation site for fatigue related accidents of fixed wing aircraft. Current methods for inspecting airframes for these cracks are manual, whereby inspectors rely on non-destructive inspection equipment or hand-held probes to scan over areas of a structure. Use of this equipment often demands disassembly of the vehicle to search appropriate hole locations for cracks, which elevates the complexity and cost of these maintenance inspections. Improved reliability, safety, and reduced cost of such maintenance can be realized by the permanent integration of sensors with a structure to detect this damage. Such an integrated system of sensors would form a structural health monitoring (SHM) system. In this study, an Additive, Interleaved, Multi-layer Electromagnetic (AIME) sensor was developed and integrated with the shank of a fastener to form a SHM Fastener, a new SHM technology targeted at detection of fastener hole cracks. The major advantages of the SHM Fastener are its installation, which does not require joint layer disassembly, its capability to detect inner layer cracks, and its capability to operate in a continuous autonomous mode. Two methods for fabricating the proposed SHM Fastener were studied. The first option consisted of a thin flexible printed circuit film that was bonded around a thin metallic sleeve placed around the fastener shank. The second option consisted of coating sensor materials directly to the shank of a part in an effort to increase the durability of the sensor under severe loading conditions. Both analytical and numerical models were developed to characterize the capability of the sensors and provide a design tool for the sensor layout. A diagnostic technique for crack growth monitoring was developed to complete the SHM system, which consists of the sensor, data acquisition hardware, algorithm, and diagnostic display. The AIME sensor design, SHM Fastener, and complete SHM system are presented along with experimental results from a series of single-layer and bolted double lap joint aluminum laboratory specimens to validate the capability of these sensors to monitor metallic joints for fastener hole cracks. Fatigue cracks were successfully tracked to over 0.7 inches from the fastener hole in these tests. Sensor output obtained from single-layer fatigue specimens was compared with analytical predictions for fatigue crack growth versus cycle number showing a good correlation in trend between sensor output and predicted crack size.

Experimental analysis of thread movement in bolted connections due to vibrations

NASA Technical Reports Server (NTRS)

Ramey, G. ED; Jenkins, Robert C.

1994-01-01

The objective of this study was to identify the main design parameters contributing to loosening of bolts due to vibration and to identify their relative importance and degree of contribution to bolt loosening. Vibration testing was conducted on a shaketable with a controlled-random input in the dynamic testing laboratory of the Structural Test Division of MSFC. Test specimens which contained one test bolt were vibrated for a fixed amount of time and percentage of pre-load loss was measured. Each specimen tested implemented some combination of eleven design parameters as dictated by the design of experiment methodology employed. The eleven design parameters were: bolt size (diameter), lubrication on bolt, hole tolerance, initial pre-load, nut locking device, grip length, thread pitch, lubrication between mating materials, class of fit, joint configuration and mass of configuration. These parameters were chosen for this experiment because they are believed to be the design parameters having the greatest impact on bolt loosening. Two values of each design parameter were used and each combination of parameters tested was subjected to two different directions of vibration and two different g-levels of vibration. One replication was made for each test to gain some indication of experimental error and repeatability and to give some degree of statistical credibility to the data, resulting in a total of 96 tests being performed. The results of the investigation indicated that nut locking devices, joint configuration, fastener size, and mass of configuration were significant in bolt loosening due to vibration. The results of this test can be utilized to further research the complex problem of bolt loosening due to vibration.

76 FR 38062 - Airworthiness Directives; Gulfstream Aerospace LP Model Galaxy and Gulfstream 200 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... with certified mechanical properties of this fastener can potentially lead to an unsafe condition. The... certified mechanical properties of this fastener can potentially lead to an unsafe condition. The unsafe...-conformity with certified mechanical properties of this fastener can potentially lead to an unsafe condition...

49 CFR 231.17 - Specifications common to all steam locomotives.

Code of Federal Regulations, 2011 CFR

2011-10-01

... shall be securely fastened with bolts, rivets, or studs. (ii) Locomotives having Wootten type boilers... inches above outside edge of running boards, securely fastened with bolts, rivets, or studs. (c... inches in height, measured from the top of end sill, and securely fastened with bolts or rivets. (f...

Statistics of Crack Growth in Engine Materials. Volume 2. Spectrum Loading and advanced Techniques

DTIC Science & Technology

1984-02-01

Histories of Some WPB Fastener H oles ..................................................................................... 66 51 Typical Sample Function of...Computed Directly from Some Actual Time- Histories of W PB Fastener Holes ................................................................ 77 56 Simulated...Sample Functions of Crack Propagation Time- Histories for W PB Fastener Holes ................................................................ 78 57

14 CFR 125.211 - Seat and safety belts.

Code of Federal Regulations, 2014 CFR

2014-01-01

... emergency exit. (f) Each occupant of a seat equipped with a shoulder harness must fasten the shoulder harness during takeoff and landing, except that, in the case of crewmembers, the shoulder harness need not be fastened if the crewmember cannot perform his required duties with the shoulder harness fastened...

Intelligent Fasteners

NASA Technical Reports Server (NTRS)

1997-01-01

Under a Small Business Innovation Research contract from Marshall Space Flight Center, Ultrafast, Inc. developed the world's first, high-temperature resistant, "intelligent" fastener. NASA needed a critical-fastening appraisal and validation of spacecraft segments that are coupled together in space. The intelligent-bolt technology deletes the self-defeating procedure of having to untighten the fastener, and thus upset the joint, during inspection and maintenance. The Ultrafast solution yielded an innovation that is likely to revolutionize manufacturing assembly, particularly the automobile industry. Other areas of application range from aircraft, computers and fork-lifts to offshore platforms, buildings, and bridges.

Inspection of aircraft fastener holes using a conically shaped multi-element phased array probe

NASA Astrophysics Data System (ADS)

Selman, J. J.; Miller, J. T.; Moles, M. D. C.; Dupuis, O.; Herzog, P. G.

2002-05-01

A novel inspection technique is described using phased ultrasonic arrays to detect faying surface cracks in the first layer around the base of a fastener hole with fasteners installed. A unique phased array probe incorporates a matrix of ultrasonic elements arranged in a conical configuration encircling the fastener head. This arrangement permits deflection of the ultrasonic beam in three dimensions, and adapts to different hole diameters and skin thickness. Full circumferential scans are performed using a pre-programmed sequence of phased array focal laws. The inspection method uses pulse-echo at a variety of angles incident on the crack to thoroughly cover the fastener hole and surrounding area, and is designed to detect cracks as small as 0.030″ in length.

Simplified Design Method for Tension Fasteners

NASA Astrophysics Data System (ADS)

Olmstead, Jim; Barker, Paul; Vandersluis, Jonathan

2012-07-01

Tension fastened joints design has traditionally been an iterative tradeoff between separation and strength requirements. This paper presents equations for the maximum external load that a fastened joint can support and the optimal preload to achieve this load. The equations, based on linear joint theory, account for separation and strength safety factors and variations in joint geometry, materials, preload, load-plane factor and thermal loading. The strength-normalized versions of the equations are applicable to any fastener and can be plotted to create a "Fastener Design Space", FDS. Any combination of preload and tension that falls within the FDS represents a safe joint design. The equation for the FDS apex represents the optimal preload and load capacity of a set of joints. The method can be used for preliminary design or to evaluate multiple pre-existing joints.

Detailed finite element analysis and preliminary study of the effects of friction and fastener pre-tension on the mechanical behavior of fastened built-up members

NASA Astrophysics Data System (ADS)

Bonachera Martin, Francisco Javier

The characterization of fatigue resistance is one of the main concerns in structural engineering, a concern that is particularly important in the evaluation of existing bridge members designed or erected before the development of fatigue design provisions. The ability of a structural member to develop alternate load paths after the failure of a component is known as member-level or internal redundancy. In fastened built-up members, these alternate load paths are affected by the combination of fastener pre-tension and friction between the structural member components in contact. In this study, a finite element methodology to model and analyze riveted and bolted built-up members was developed in ABAQUS and validated with experimental results. This methodology was used to created finite element models of three fastened plates subjected to tension, in which the middle plate had failed, in order to investigate the fundamental effects of combined fastener pre-tension and friction on their mechanical behavior. Detailed finite element models of riveted and bolted built-up flexural members were created and analyze to understand the effect of fastener pre-tension in member-level redundancy and resistance to fatigue and fracture. The obtained results showed that bolted members are able to re-distribute a larger portion of the load away from the failing component into the rest of the member than riveted members, and that this transfer of load also took place over a smaller length. Superior pre-tension of bolts, in comparison to rivets, results in larger frictional forces that develop at the contact interfaces between components and constitute additional alternate load paths that increase member-level redundancy which increase the fatigue and fracture resistance of the structural member during the failure of one of its components. Although fatigue and fracture potential may be mitigated by compressive stresses developing around the fastener hole due to fastener pre-tension, it was also observed, that at the surface of the fastener hole and at the contact interface with another plate, tensional stresses could develop; however, further computational and experimental work should be performed to verify this claim.

Wood : mechanical fasteners

Treesearch

Douglas R. Rammer

2001-01-01

The strength and stability of any structure depends heavily on the fasteners that hold its parts together. One prime advantage of wood as a structural material is the ease with which wood structural parts can be joined together using a wide variety of fasteners: nails, staples, screws, lag screws, bolts, and various types of metal connectors. For the utmost rigidity,...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

14 CFR 137.42 - Fastening of safety belts and shoulder harnesses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Fastening of safety belts and shoulder... AGRICULTURAL AIRCRAFT OPERATIONS Operating Rules § 137.42 Fastening of safety belts and shoulder harnesses. No... belt and shoulder harness properly secured about that person except that the shoulder harness need not...

Advances in transient (pulsed) eddy current for inspection of multi-layer aluminum structures in the presence of ferrous fasteners

NASA Astrophysics Data System (ADS)

Desjardins, D. R.; Vallières, G.; Whalen, P. P.; Krause, T. W.

2012-05-01

An experimental investigation of the electromagnetic processes underlying transient (pulsed) eddy current inspection of aircraft wing structures in the vicinity of ferrous fasteners is performed. The separate effects of transient excitation of ferrous fastener and eddy currents induced in the surrounding aluminum structure are explored using a transmit-receive configuration with transient excitation of a steel rod, an aluminum plate with a bore hole and a steel rod through the bore hole. Observations are used to interpret results from a coupled driving and differential coil sensing unit applied to detect fatigue cracks emanating from bolt holes in aluminum structures with ferrous fasteners present. In particular, it is noted that abrupt magnetization of the fastener, by the probe's central driving unit, can transfer flux and consequently, induce strong eddy current responses deep within the aluminum structure in the vicinity of the bore hole. Rotation of the probe, centered over the fastener, permits detection of subsurface discontinuities, such as cracks, by the pair of differentially connected pickup coils.

Joining technologies for the 1990s: Welding, brazing, soldering, mechanical, explosive, solid-state, adhesive

NASA Technical Reports Server (NTRS)

Buckley, John D. (Editor); Stein, Bland A. (Editor)

1986-01-01

A compilation of papers presented in a joint NASA, American Society for Metals, The George Washington University, American Welding Society, and Society of Manufacturing Engineers Conference on Welding, Bonding, and Fastening at Langley Research Center, Hampton, VA, on October 23 to 25, 1984 is given. Papers were presented on technology developed in current research programs relevant to welding, bonding, and fastening of structural materials required in fabricating structures and mechanical systems used in the aerospace, hydrospace, and automotive industries. Topics covered in the conference included equipment, hardware and materials used when welding, brazing, and soldering, mechanical fastening, explosive welding, use of unique selected joining techniques, adhesives bonding, and nondestructive evaluation. A concept of the factory of the future was presented, followed by advanced welding techniques, automated equipment for welding, welding in a cryogenic atmosphere, blind fastening, stress corrosion resistant fasteners, fastening equipment, explosive welding of different configurations and materials, solid-state bonding, electron beam welding, new adhesives, effects of cryogenics on adhesives, and new techniques and equipment for adhesive bonding.

Basic space payload fastener

NASA Technical Reports Server (NTRS)

Vranish, J. M.; Gorevan, Stephen

1995-01-01

A new basic space fastener has been developed and tested by the GSFC. The purposes of this fastener are to permit assembly and servicing in space by astronauts and/or robots and to facilitate qualification of payloads on Earth prior to launch by saving time and money during the systems integration and component testing and qualification processes. The space fastener is a rework of the basic machine screw such that crossthreading is impossible; it is self-locking and will not work its way out during launch (vibration proof); it will not wear out despite repeated use; it occupies a small foot print which is comparable to its machine screw equivalent, and it provides force and exhibits strength comparable to its machine screw equivalent. Construction is ultra-simple and cost effective and the principle is applicable across the full range of screw sizes ranging from a #10 screw to 2.5 cm (1 in) or more. In this paper, the fastener principles of operation will be discussed along with test results and construction details. The new fastener also has considerable potential in the commercial sector. A few promising applications will be presented.

Fastener Corrosion: A Result of Moisture Problems in the Building Envelope

Treesearch

Samuel L. Zelinka

2013-01-01

This paper reviews recent literature on the corrosion of metals embedded in wood and highlights the link be-tween moisture accumulation in wood and fastener cor-rosion. Mechanisms of fastener corrosion are described including dependence upon wood moisture content. These fundamental concepts are applied to practical examples by explaining how hygrothermal models can be...

Angle to grain strength of dowel-type fasteners

Treesearch

Lawrence A. Soltis; Suparman Karnasudirdja; James K. Little

1987-01-01

Timber structures require adequate connections between components. Connection design is based on the performance criterion of a single fastener. This study is part of a research effort by the Forest Products Laboratory to establish a common basis design criteria for lateral strength of dowel-type fasteners that includes nails, screws, lag screws, and bolts. A general...

19 CFR 24.13a - Car, compartment, and package seals; and fastenings; standards; acceptance by Customs.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Car, compartment, and package seals; and... PROCEDURE § 24.13a Car, compartment, and package seals; and fastenings; standards; acceptance by Customs. (a) General standards. The seals and fastenings, together, shall (1) Be strong and durable; (2) Be capable of...

Fastenings

Treesearch

Lawrence A. Soltis

1999-01-01

The strength and stability of any structure depend heavily on the fastenings that hold its parts together. One prime advantage of wood as a structural material is the ease with which wood structural parts can be joined together with a wide variety of fastenings— nails, spikes, screws, bolts, lag screws, drift pins, staples, and metal connectors of various types. For...

Fastenings

Treesearch

Douglas R. Rammer

2010-01-01

The strength and stability of any structure depend heavily on the fastenings that hold its parts together. One prime advantage of wood as a structural material is the ease with which wood structural parts can be joined together with a wide variety of fastenings—nails, spikes, screws, bolts, lag screws, drift pins, staples, and metal connectors of various types. For...

75 FR 66653 - Airworthiness Directives; McDonnell Douglas Corporation Model MD-90-30 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-29

... the left and right engine aft mounts with new fasteners, in accordance with the Accomplishment... defects of the upper fasteners of the aft mount support fittings of the left and right engines, and corrective actions if necessary. This new AD requires repetitive replacement of the upper row of fasteners of...

Electromagnetic Detection of Fatigue Cracks under Protruding Head Ferromagnetic Fasteners

NASA Technical Reports Server (NTRS)

Wincheski, Buzz; Namkung, Min

2004-01-01

The detection of fatigue cracks under installed fasteners has been a major goal of the aging aircraft NDE community. The Sliding Probe, Magneto-Optic Imager, Rotating Self-Nulling Probe, Low Frequency Eddy Current Array, and Eddyscan systems are among the instruments developed for this inspection. It has been verified that the detection of fatigue cracks under flush head aluminum and titanium fasteners can be accomplished with a high resolution by the above techniques. The detection of fatigue cracks under ferromagnetic and protruding head fasteners, however, has been found to be much more difficult. For the present work, the inspection for fatigue cracks under SAE 4340 Steel Hi-Lok fasteners is explored. Modifications to the Rotating Self-Nulling Eddy Current Probe System are presented which enable the detection of fatigue cracks hidden under the protruding head of the ferromagnetic fastener. Inspection results for samples with varying length EDM notches are shown, as well as a comparison between the signature from an EDM notch and an actual fatigue crack. Finite Element Modeling is used to investigate the effect of the ferromagnetic fastener on the induced eddy current distribution in order to help explain the detection characteristics of the system. This paper will also introduce a modification to the Rotating Probe System designed specifically for the detection of deeply buried flaws in multilayer conductors. The design change incorporates a giant magnetoresistive (GMR) sensor as the pickup device to improve the low frequency performance of the probe. The flaw detection capabilities of the GMR based Self- Nulling Probe are presented along with the status of the GMR based Rotating Probe System for detection of deeply buried flaws under installed fasteners.

Mounting Systems for Structural Members, Fastening Assemblies Thereof, and Vibration Isolation Systems Including the Same

NASA Technical Reports Server (NTRS)

Young, Ken (Inventor); Hindle, Timothy (Inventor); Barber, Tim Daniel (Inventor)

2016-01-01

Mounting systems for structural members, fastening assemblies thereof, and vibration isolation systems including the same are provided. Mounting systems comprise a pair of mounting brackets, each clamped against a fastening assembly forming a mounting assembly. Fastening assemblies comprise a spherical rod end comprising a spherical member having a through opening and an integrally threaded shaft, first and second seating members on opposite sides of the spherical member and each having a through opening that is substantially coaxial with the spherical member through opening, and a partially threaded fastener that threadably engages each mounting bracket forming the mounting assembly. Structural members have axial end portions, each releasably coupled to a mounting bracket by the integrally threaded shaft. Axial end portions are threaded in opposite directions for permitting structural member rotation to adjust a length thereof to a substantially zero strain position. Structural members may be vibration isolator struts in vibration isolation systems.

Electrochemical corrosion testing of fasteners in extracts of treated wood

Treesearch

Samuel L. Zelinka; Douglas R. Rammer; Donald S. Stone

2008-01-01

A recent change in wood preservatives has highlighted the need for a rapid, quantitative test to measure the corrosion rates of metals in contact with treated wood that could be used to evaluate new fasteners or new wood preservatives. A new method was developed where polarisation resistance tests were conducted on fasteners exposed to a water extract of wood treated...

Fabrication technology: A compilation

NASA Technical Reports Server (NTRS)

1974-01-01

A compilation is presented which supplies technical information on the assembly of diverse components into functional assemblies and subassemblies, as well as information on several fasteners and fastening techniques that join components, subassemblies, and complete assemblies to achieve a functional unit. Quick-disconnect fasteners are described, along with several devices and methods for attaching thermal insulators, and for joining and separating objects in the absence of gravity.

Combining hygrothermal and corrosion models to predict corrosion of metal fasteners embedded in wood

Treesearch

Samuel L. Zelinka; Dominique Derome; Samuel V. Glass

2011-01-01

A combined heat, moisture, and corrosion model is presented and used to simulate the corrosion of metal fasteners embedded in solid wood exposed to the exterior environment. First, the moisture content and temperature at the wood/fastener interface is determined at each time step. Then, the amount of corrosion is determined spatially using an empirical corrosion rate...

75 FR 38056 - Airworthiness Directives; McDonnell Douglas Corporation Model MD-90-30 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... (Row A) of the support fittings of the left and right engine aft mount with new fasteners. The service... fasteners (Row A) of the support fittings of the left and right engine aft mounts with new fasteners, in... fittings of the left and right engines, and corrective actions if necessary. This proposed AD would instead...

Development of an advanced high-temperature fastener system for advanced aerospace vehicle application

NASA Technical Reports Server (NTRS)

Kull, F. R.

1975-01-01

The results of a program to develop a lightweight high temperature reusable fastening system for aerospace vehicle thermal protection system applications are documented. This feasibility program resulted in several fastener innovations which will meet the specific needs of the heat shield application. Three systems were designed from Hayes 188 alloy and tested by environmental exposure and residual mechanical properties. The designs include a clinch stud with a collar retainer, a weld stud with a split ring retainer, and a caged stud with a collar retainer. The results indicated that a lightweight, reusable, high temperature fastening system can be developed for aerospace vehicle application.

Detection and imaging of corrosion around wing skin fasteners using the dripless bubbler ultrasonic scanner

NASA Astrophysics Data System (ADS)

Hsu, David K.; Barnard, Daniel J.

1998-03-01

The galvanic action between steel fasteners and aluminum wing skins of aircraft often leads to hidden exfoliation corrosion around the countersink surface of the fastener heads. To detect and evaluate the severity of such corrosion defects, the Dripless Bubbler ultrasonic scanner was applied. This technique uses a focused beam of high frequency ultrasound in a closed-cycle, water-coupled scan of wing skin test panels containing corroded and uncorroded fasteners. With full waveform acquisition, not only the lateral extent but also the depth profile of the corrosions around the fastener heads were mapped out, subject to shadowing of defects at different depth. The technique is capable of providing quantitative assessment of the severity of the corrosion. In tests conducted to evaluate different techniques, the Dripless Bubbler has shown high probability of detection and low false call rate. The presence of paint on the surface did not degrade the performance of the technique. In addition, the Dripless Bubbler was also used on wing skin panels containing repair 'blend-out' regions that had 0.020' to 0.100' of metal removed from the surface by grinding. Corrosions around fasteners in the blend-out regions were also detected.

Thermal stress in high temperature cylindrical fasteners

NASA Technical Reports Server (NTRS)

Blosser, Max L.

1988-01-01

Uninsulated structures fabricated from carbon or silicon-based materials, which are allowed to become hot during flight, are attractive for the design of some components of hypersonic vehicles. They have the potential to reduce weight and increase vehicle efficiency. Because of manufacturing contraints, these structures will consist of parts which must be fastened together. The thermal expansion mismatch between conventional metal fasteners and carbon or silicon-based structural materials may make it difficult to design a structural joint which is tight over the operational temperature range without exceeding allowable stress limits. In this study, algebraic, closed-form solutions for calculating the thermal stresses resulting from radial thermal expansion mismatch around a cylindrical fastener are developed. These solutions permit a designer to quickly evaluate many combinations of materials for the fastener and the structure. Using the algebraic equations developed, material properties and joint geometry were varied to determine their effect on thermal stresses. Finite element analyses were used to verify that the closed-form solutions derived give the correct thermal stress distribution around a cylindrical fastener and to investigate the effect of some of the simplifying assumptions made in developing the closed-form solutions for thermal stresses.

Quick-connect fasteners for assembling devices in space

NASA Technical Reports Server (NTRS)

Evenson, Erik E. (Inventor); Wesselski, Clarence J. (Inventor); Ruiz, Steve C. (Inventor)

1993-01-01

A quick-connect fastener of a relatively-simple straightforward design is arranged with a tubular body adapted to be engaged against an attachment fitting in coincidental alignment with an opening in that fitting. A tubular collet having flexible fingers projecting from its forward end is arranged in the fastener body to be shifted forwardly by an elongated expander member coaxially arranged within the tubular collet for advancing the collet fingers into the opening in the attachment fitting. Biasing means are arranged between the elongated expander member and a rotatable actuator which is threadedly mounted within the tubular collet so as to be rotated for urging the expander member into engagement with the collet fingers. A first coupling member is arranged on the rotatable actuator to be accessible from outside of the fastener so that a second coupling member on the distal end of a flexible shaft can be introduced into the fastener body and coupled to the first coupling member to enable a typical actuating tool coupled to the shaft outside of the fastener body to be operated for advancing the outwardly-enlarged ends of the collet fingers into the opening in the attachment fitting and thereafter rotating the actuator member to expand the fingers within the opening for releasably latching the fastener to that attachment fitting. Upon expansion of the collet fingers, the biasing means impose a biasing force on the expander to releasably retain the fingers in their latching positions.

Comparing the Methodologies in ASTM G198 Using Combined Hygrothermal-Corrosion Modeling

Treesearch

Samuel L. Zelinka

2013-01-01

ASTM G198, “Standard test method for determining the relative corrosion performance of driven fasteners in contact with treated wood,” was accepted by consensus and published in 2011. The method has two different exposure conditions for determining fastener corrosion performance in treated wood. The first method places the wood and embedded fasteners in a...

Comparison of the corrosion of fasteners embedded in wood measured in outdoor exposure with the predictions from a combined hygrothermal-corrosion model

Treesearch

Samuel L. Zelinka; Samuel V. Glass; Charles R. Boardman; Dominique Derome

2016-01-01

This paper examines the accuracy of a recently developed hygrothermal-corrosion model which predictsthe corrosion of fasteners embedded in wood by comparing the results of the model to a one year fieldtest. Steel and galvanized steel fasteners were embedded into untreated and preservative treated woodand exposed outdoors while weather data were collected. Qualitatively...

75 FR 35611 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, and MD-10-10F...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... one-time high frequency eddy current inspection of fastener holes for cracks at the left and right... frequency eddy current inspection of fastener holes for cracks at the left and right side wing rear spar... frequency eddy current inspection for cracking of fastener holes at the left and right side wing rear spar...

75 FR 2831 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, and MD-10-10F...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-19

... proposed AD would require a one-time high frequency eddy current inspection of fastener holes for cracks at... high frequency eddy current inspection of fastener holes for cracking at the left and right side wing... of this AD, do a one-time high frequency eddy current inspection for cracking of fastener holes at...

Payload Launch Lock Mechanism

NASA Technical Reports Server (NTRS)

Young, Ken (Inventor); Hindle, Timothy (Inventor)

2014-01-01

A payload launch lock mechanism includes a base, a preload clamp, a fastener, and a shape memory alloy (SMA) actuator. The preload clamp is configured to releasibly restrain a payload. The fastener extends, along an axis, through the preload clamp and into the base, and supplies a force to the preload clamp sufficient to restrain the payload. The SMA actuator is disposed between the base and the clamp. The SMA actuator is adapted to receive electrical current and is configured, upon receipt of the electrical current, to supply a force that causes the fastener to elongate without fracturing. The preload clamp, in response to the fastener elongation, either rotates or pivots to thereby release the payload.

Nondestructive ultrasonic measurement of bolt preload using the pulsed-phase locked-loop interferometer

NASA Technical Reports Server (NTRS)

Allison, S. G.; Heyman, J. S.

1985-01-01

Achieving accurate preload in threaded fasteners is an important and often critical problem which is encountered in nearly all sectors of government and industry. Conventional tensioning methods which rely on torque carry with them the disadvantage of requiring constant friction in the fastener in order to accurately correlate torque to preload. Since most of the applied torque typically overcomes friction rather than tensioning the fastener, small variations in friction can cause large variations in preload. An instrument called a pulsed phase locked loop interferometer, which was recently developed at NASA Langley, has found widespread use for measurement of stress as well as material properties. When used to measure bolt preload, this system detects changes in the fastener length and sound velocity which are independent of friction. The system is therefore capable of accurately establishing the correct change in bolt tension. This high resolution instrument has been used for precision measurement of preload in critical fasteners for numerous applications such as the space shuttle landing gear and helicopter main rotors.

76 FR 47430 - Airworthiness Directives; Airbus Model A300 B4-600, A300 B4-600R, and A300 F4-600R Series...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-05

...], reported the failure during a wind tunnel test of a balance weight fastening screw on the RAT turbine cover... balance weight fastening screw on the RAT turbine cover during a wind tunnel test. After investigation, it... during a wind tunnel test of a balance weight fastening screw on the RAT turbine cover. After...

Alloy and composition dependence of hydrogen embrittlement susceptibility in high-strength steel fasteners

NASA Astrophysics Data System (ADS)

Brahimi, S. V.; Yue, S.; Sriraman, K. R.

2017-06-01

High-strength steel fasteners characterized by tensile strengths above 1100 MPa are often used in critical applications where a failure can have catastrophic consequences. Preventing hydrogen embrittlement (HE) failure is a fundamental concern implicating the entire fastener supply chain. Research is typically conducted under idealized conditions that cannot be translated into know-how prescribed in fastener industry standards and practices. Additionally, inconsistencies and even contradictions in fastener industry standards have led to much confusion and many preventable or misdiagnosed fastener failures. HE susceptibility is a function of the material condition, which is comprehensively described by the metallurgical and mechanical properties. Material strength has a first-order effect on HE susceptibility, which increases significantly above 1200 MPa and is characterized by a ductile-brittle transition. For a given concentration of hydrogen and at equal strength, the critical strength above which the ductile-brittle transition begins can vary due to second-order effects of chemistry, tempering temperature and sub-microstructure. Additionally, non-homogeneity of the metallurgical structure resulting from poorly controlled heat treatment, impurities and non-metallic inclusions can increase HE susceptibility of steel in ways that are measurable but unpredictable. Below 1200 MPa, non-conforming quality is often the root cause of real-life failures. This article is part of the themed issue 'The challenges of hydrogen and metals'.

Behavior of a tapered hub flange with a bolted flat cover in transient temperature field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sawa, T.; Nakagomi, Y.; Hirose, T.

1996-02-01

When bolted flange connections with gaskets are used in mechanical structures such as pipe connections, bolted covers of casks, and pressure vessels in nuclear and chemical plants and cylinder heads in internal combustion engines, they are usually subjected to transient thermal conditions. An experimental and analytical study was made on a bolted connection subjected to thermal loading. The connection consists of an aluminum alloy tapered hub flange and a flat cover, including a gasket fastened by steel bolts and nuts. Temperature distribution in the connection was measured with thermocouples, and the axial bolt force, the maximum bolt stress, and themore » hub stress were measured by strain gages under a thermal condition that the inner surface of the flanges was heated and the outer surfaces of the flanges and the cover were held at room temperature. Finite difference analysis was made to obtain the temperature distributions in the connection due to a transient thermal condition. This paper demonstrates the method for obtaining an increment in axial bolt force and the maximum bolt stress. In all cases, the analytical results were fairly consistent with the experimental results.« less

76 FR 25259 - Airworthiness Directives; Airbus Model A300 B4-600, A300 B4-600R, and A300 F4-600R Series...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

...], reported the failure during a wind tunnel test of a balance weight fastening screw on the RAT turbine cover... balance weight fastening screw on the RAT turbine cover during a wind tunnel test. After investigation, it... failure during a wind tunnel test of a balance weight fastening screw on the RAT turbine cover. After...

Design Methodology for Bonded-Bolted Composite Joints. Volume I. Analysis Derivations and Illustrative Solutions

DTIC Science & Technology

1982-02-01

EXPERIMENTAL EVIDENCE ...... ....... ....... ....... ... 27 2.6 LOAD REDISTRIBUTION DUE TO DISBONDS IN ADHESIVE IN STEPPED-LAP JOINTS...SINGLE FASTENER " . ;39 3.4 LOAD SHARING BETWEEN MULTIRUW FASTENERS.."."..-.."." ൴ 3.5 FAILURE CRITERIA AT FASTENER HOLES . . ... 3.6 EXPERIMENTAL ...PLASTIC C. PERFECTLY ELASTIC THROUGHOUT A. ULL PLSTC SEAR TRS•WITHOUT $1IGN REVERSAL WITHOUT S:IG13 REVERSAL IOR FULLY NEGATIVE QUIVALENT ) (OR FULLY

Development of Technology for Modernizing Depot Handling of Fasteners

DTIC Science & Technology

1992-01-28

EVALUATION, 53 COUNTERFEIT FASTENERS, SENSORS *7. $CUWT CASSICATION I. SlCUIITY ,LASSIFICA,1ON 19. SECU’ITY UAWFIuIATlON 20. UM1TATION OQ AISTRACT OP...Handling of Fasteners for Detection of Counterfeits and Inventory Control submitted by the University of Detroit in response to PRDA 90-01 released by...This report details the investigation into the problems and the identification of a solution methodology. 6 COUNTERFEIT UNKNOWN MISMATCHED PARTS PARTS

Computer implemented method, and apparatus for controlling a hand-held tool

NASA Technical Reports Server (NTRS)

Wagner, Kenneth William (Inventor); Taylor, James Clayton (Inventor)

1999-01-01

The invention described here in is a computer-implemented method and apparatus for controlling a hand-held tool. In particular, the control of a hand held tool is for the purpose of controlling the speed of a fastener interface mechanism and the torque applied to fasteners by the fastener interface mechanism of the hand-held tool and monitoring the operating parameters of the tool. The control is embodied in intool software embedded on a processor within the tool which also communicates with remote software. An operator can run the tool, or through the interaction of both software, operate the tool from a remote location, analyze data from a performance history recorded by the tool, and select various torque and speed parameters for each fastener.

Pneumovesical ureteric reimplantation using T-fastener: A modification for bladder wall anchorage.

PubMed

Lau, Chin Tung; Lan, Lawrence Chuen Leung; Wong, Kenneth Kak Yuen; Tam, Paul

2017-06-01

Bladder anchoring during pneumovesical ureteric reimplantation (PUR) can be difficult. Here we describe our new technique using a T-fastener (Kimberly Clark, Irving, TX, USA) to tackle this problem. A T-fastener has been applied to all patients who underwent PUR in our center since 2011. Seventeen consecutive cases were performed between 2011 and 2015. No bladder dislodgement or air leak was observed in any of the operations. No morbidity or mortality has been associated with the use of T-fasteners. In our experience, this technique is simple to learn and transferrable. It decreases intraoperative complications and helps to climb the learning curve. Copyright © 2017 Journal of Pediatric Urology Company. Published by Elsevier Ltd. All rights reserved.

Detection of damaged supports under railway track based on frequency shift

NASA Astrophysics Data System (ADS)

Wang, Longqi; Zhang, Yao; Lie, Seng Tjhen

2017-03-01

In railway transportation systems, the tracks are usually fastened on sleepers which are supported by the ballast. A lot of research has been conducted to guarantee the safety of railway track because of its importance, and more concern is expressed about monitoring of track itself such as railway level and alignment. The ballast and fasteners which provide strong support to the railway track are important as well whereas the detection of loose or missing fasteners and damaged ballast mainly relies on visual inspection. Although it is reliable when the fastener is missing and the damaged ballast is on the surface, it provides less help if the fastener is only loose and the damaged ballast is under the sleepers, which are however frequently observed in practice. This paper proposes an approach based on frequency shift to identify the damaged supports including the loose or missing fasteners and damaged ballast. In this study, the rail-sleeper-ballast system is modeled as an Euler beam evenly supported by a series of springs, the stiffness of which are reduced when the fastener is loose or missing and the ballast under the sleepers is damaged. An auxiliary mass is utilized herein and when it is mounted on the beam, the natural frequencies of the whole system will change with respect to the location of the auxiliary mass. The auxiliary mass induced frequency shift is analyzed and it is found the natural frequencies change periodically when the supports are undamaged, whereas the periodicity will be broken due to damaged supports. In fact, the natural frequencies drop clearly when the auxiliary mass moves over the damaged support. A special damage index only using the information of the damaged states is proposed and both numerical and experimental examples are carried out to validate the proposed method.

Behaviour and Analysis of Mechanically Fastened Joints in Composite Structures

DTIC Science & Technology

1988-03-01

Safety Factors for Use When Designing bolted Joints In GRP," Composites , April 1979, pp. M376. 93. Dastln, S., "Joining and Machining Techniques... MACHINE SPACER LOCKmm STEEL PLATE FASTENER 203 mm OR DOWEL FiN EXTENSOMETER EXTENSOMETER TGAUGE LENGTH ATTACHMENT COMPOSITE - PLATE 31 mm p NOTE: NOT TO...No.427 Behaviour and Analysis of Mechanically Fastened Joints in Composite Structures DTIC CXVTflUTION STATEME~r £ELECTE Approved fm Vubhc sIlam l JUL

System for tamper identification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bobbitt, III, John Thomas; Weeks, George E.

2017-09-05

A system for tamper identification. A fastener has a tamper identification surface with a unique grain structure that is altered if the fastener is removed or otherwise exposed to sufficient torque. After a period of time such as e.g., shipment and/or storage of the sealed container, a determination of whether tampering has occurred can be undertaken by examining the grain structure to determine if it has changed since the fastener was used to seal the container or secure the device.

Quick-connect fasteners for assembling devices in space

NASA Technical Reports Server (NTRS)

Wesselski, Clarence J. (Inventor); Evenson, Erik E. (Inventor); Ruiz, Steve L. (Inventor)

1992-01-01

A quick-connect fastener of a relatively-simple straightforward design is arranged with a tubular body adapted to be engaged against an attachment fitting in coincidental alignment with an opening in that fitting. A tubular collet having flexible finger projecting from its forward end is arranged in the fastener body to be shifted forwardly by an elongated expander member coaxially arranged within the tubular collet for advancing the collet fingers into the opening in the attachment fitting. Biasing means are arranged between the elongated expander member and a rotatable actuator which is threadedly mounted within the tubular collet so as to be rotated for urging the expander member into engagement with the collet fingers. A first coupling member is arranged on the rotatable actuator to be accessible from outside of the fastener so that a second coupling member on the distal end of a flexible shaft can be introduced into the fastener body and coupled to the first coupling member to enable a typical actuating tool coupled to the shaft outside of the fastener body to be operated for advancing the outwardly-enlarged ends of the collet fingers into the opening in the attachment fitting and thereafter rotating the actuator member to expand the fingers to that attachment fitting. Upon expansion of the collet fingers, the biasing means impose a biasing force on the expander to releasably retain the fingers in their latching positions.

30 CFR 18.32 - Fastenings-additional requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Construction... or for making electrical connections. (g) The acceptable sizes for and spacings of fastenings shall...

Tamper indicating bolt

DOEpatents

Blagin, Sergei V.; Barkanov, Boris P.

2004-09-14

A tamper-indicating fastener has a cylindrical body with threads extending from one end along a portion of the body, and a tamper indicating having a transducer for converting physical properties of the body into electronic data; electronics for recording the electronic data; and means for communicating the recorded information to a remote location from said fastener. The electronics includes a capacitor that varies as a function of force applied by the fastener, and non-volatile memory for recording instances when the capacitance varies, providing an indication of unauthorized access.

Experimental Research on the Elastic Deformation Mode of S235JR Rolled Steel Fastened between the Centers of a Universal Lathe

NASA Astrophysics Data System (ADS)

Tabacaru, LL; Axinte, E.; Musca, G.

2016-11-01

Elastic deformations of the technological system occur during the mechanical treatment of a blank, regardless of the manner in which it is fastened. The elastic deformation of the blank is significant especially when machining shaft-like parts. The purpose of our research is to compare the mathematical model of blank deformation to the experimental model when the blank, which is a part belonging to the shaft class, is fastened between centers.

High temperature turbine engine structure

DOEpatents

Boyd, Gary L.

1992-01-01

A hybrid ceramic/metallic fastener (bolt) includes a headed ceramic shank carrying a metallic end termination fitting. A conventional cap screw threadably engages the termination fitting to apply tensile force to the fastener.

High temperature turbine engine structure

DOEpatents

Boyd, Gary L.

1991-01-01

A hybrid ceramic/metallic fastener (bolt) includes a headed ceramic shank carrying a metallic end termination fitting. A conventional cap screw threadably engages the termination fitting to apply tensile force to the fastener.

Experimental analysis of thread movement in bolted connections due to vibrations

NASA Technical Reports Server (NTRS)

Ramsey, G. ED; Jenkins, Robert C.

1995-01-01

This is the final report of research project NAS8-39131 #33 sponsored by NASA's George C. Marshall Space Flight Center (MSFC) and carried out by the Civil Engineering Department of Auburn University (Auburn, Alabama) and personnel of MSFC. The objective of this study was to identify the main design parameters contributing to the loosening of bolts due to vibration and to identify their relative importance and degree of contribution to bolt loosening. Vibration testing was conducted on a shaketable with a controlled-random input in the dynamic testing laboratory of the Structural Test Division of MSFC. Test specimens which contained one test bolt were vibrated for a fixed amount of time and a percentage of pre-load loss was measured. Each specimen tested implemented some combination of eleven design parameters as dictated by the design of experiment methodology employed. The eleven design parameters were: bolt size (diameter), lubrication on bolt, hole tolerance, initial pre-load, nut locking device, grip length, thread pitch, lubrication between mating materials, class of fit, joint configuration, and mass of configuration. These parameters were chosen for this experiment because they are believed to be the design parameters having the greatest impact on bolt loosening. Two values of each design parameter were used and each combination of parameters tested was subjected to two different directions of vibration and two different g-levels of vibration. One replication was made for each test to gain some indication of experimental error and repeatability and to give some degree of statistical credibility to the data, resulting in a total of 96 tests being performed. The results of the investigation indicated that nut locking devices, joint configuration, fastener size, and mass of configuration were significant in bolt loosening due to vibration. The results of this test can be utilized to further research the complex problem of bolt loosening due to vibration.

Process Specification for Eddy Current Inspection

NASA Technical Reports Server (NTRS)

Koshti, Ajay

2011-01-01

This process specification establishes the minimum requirements for eddy current inspection of flat surfaces, fastener holes, threaded fasteners and seamless and welded tubular products made from nonmagnetic alloys such as aluminum and stainless steel.

49 CFR 230.80 - Cabs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... pipe, with properly rated valves and fittings. Live steam heating radiators must not be fastened to the cab. Exhaust steam radiators may be fastened to the cab. (c) Oil-burning steam locomotives. If the cab...

78 FR 22215 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-15

... necessary; a one-time eddy current inspection of certain fastener holes for cracking, and repair if... realignment if necessary; a one-time eddy current inspection of certain fastener holes for cracking, and...

Lunar surface vehicle model competition

NASA Technical Reports Server (NTRS)

1990-01-01

During Fall and Winter quarters, Georgia Tech's School of Mechanical Engineering students designed machines and devices related to Lunar Base construction tasks. These include joint projects with Textile Engineering students. Topics studied included lunar environment simulator via drop tower technology, lunar rated fasteners, lunar habitat shelter, design of a lunar surface trenching machine, lunar support system, lunar worksite illumination (daytime), lunar regolith bagging system, sunlight diffusing tent for lunar worksite, service apparatus for lunar launch vehicles, lunar communication/power cables and teleoperated deployment machine, lunar regolith bag collection and emplacement device, soil stabilization mat for lunar launch/landing site, lunar rated fastening systems for robotic implementation, lunar surface cable/conduit and automated deployment system, lunar regolith bagging system, and lunar rated fasteners and fastening systems. A special topics team of five Spring quarter students designed and constructed a remotely controlled crane implement for the SKITTER model.

Ballistic parameters and trauma potential of direct-acting, powder-actuated fastening tools (nail guns).

PubMed

Frank, Matthias; Franke, Ernst; Schönekess, Holger C; Jorczyk, Jörn; Bockholdt, Britta; Ekkernkamp, Axel

2012-03-01

Since their introduction in the 1950s in the construction and building trade, powder-actuated fastening tools (nail guns) are of forensic and traumatological importance. There are countless reports on both accidental and intentional injuries and fatalities caused by these tools in medical literature. While the ballistic parameters of so-called low-velocity fastening tools, where the expanding gases act on a captive piston that drives the fastener into the material, are well known, ballistic parameters of "high-velocity" tools, which operate like a firearm and release the energy of the propellant directly on the fastener, are unknown. Therefore, it was the aim of this work to investigate external ballistic parameters of cal. 9 and 6-mm fastening bolts discharged from four different direct-acting nail guns (Type Ideal, Record Piccolo S, Rapid Hammer R300, Titan Type 1). Average muzzle velocity ranged from 400 to 580 m/s, while average kinetic energy of the projectiles ranged from 385 to 547 J. Mean energy density of the projectiles ranged from 9 to 18 J/mm(2). To conclude, this work demonstrates that the muzzle velocity of direct-acting high-velocity tools is approximately five times higher than the muzzle velocity of piston-type tools. Hence, the much-cited comparison to the ballistic parameters of a cal. 22 handgun might be understated and a comparison to the widespread and well-known cal. 9 mm Luger might be more appropriate.

Push Type Fastener

NASA Technical Reports Server (NTRS)

Jackson, Steven A. (Inventor)

1996-01-01

A push type fastener for fastening a movable structural part to a fixed structural part, wherein the coupling and decoupling actions are both a push type operation, the fastener consisting of a plunger having a shank with a plunger head at one end and a threaded end portion at the other end, an expandable grommet adapted to receive the plunger shank there through, and an attachable head which is securable to the threaded end of the plunger shank. The fastener requires each structural part to be provided with an aperture and the attachable head to be smaller than the aperture in the second structural part. The plunger is extensible through the grommet and is structurally configured with an external camming surface which is cooperatively engageable with internal surfaces of the grommet so that when the plunger is inserted in the grommet, the relative positioning of said cooperable camming surfaces determines the expansion of the grommet. Coupling of the parts is effected when the grommet is inserted in the aperture in the fixed structural part and expanded by pushing the plunger head and plunger at least a minimal distance through the grommet. Decoupling is effected by pushing the attachable head.

Stirling Convertor Fasteners Reliability Quantification

NASA Technical Reports Server (NTRS)

Shah, Ashwin R.; Korovaichuk, Igor; Kovacevich, Tiodor; Schreiber, Jeffrey G.

2006-01-01

Onboard Radioisotope Power Systems (RPS) being developed for NASA s deep-space science and exploration missions require reliable operation for up to 14 years and beyond. Stirling power conversion is a candidate for use in an RPS because it offers a multifold increase in the conversion efficiency of heat to electric power and reduced inventory of radioactive material. Structural fasteners are responsible to maintain structural integrity of the Stirling power convertor, which is critical to ensure reliable performance during the entire mission. Design of fasteners involve variables related to the fabrication, manufacturing, behavior of fasteners and joining parts material, structural geometry of the joining components, size and spacing of fasteners, mission loads, boundary conditions, etc. These variables have inherent uncertainties, which need to be accounted for in the reliability assessment. This paper describes these uncertainties along with a methodology to quantify the reliability, and provides results of the analysis in terms of quantified reliability and sensitivity of Stirling power conversion reliability to the design variables. Quantification of the reliability includes both structural and functional aspects of the joining components. Based on the results, the paper also describes guidelines to improve the reliability and verification testing.

Prevailing Torque Locking Feature in Threaded Fasteners Using Anaerobic Adhesive

NASA Technical Reports Server (NTRS)

Hernandez, Alan; Hess, Daniel P.

2016-01-01

This paper presents results from tests to assess the use of anaerobic adhesive for providing a prevailing torque locking feature in threaded fasteners. Test procedures are developed and tests are performed on three fastener materials, four anaerobic adhesives, and both unseated assembly conditions. Five to ten samples are tested for each combination. Tests for initial use, reuse without additional adhesive, and reuse with additional adhesive are performed for all samples. A 48-hour cure time was used for all initial use and reuse tests. Test data are presented as removal torque versus removal angle with the specification required prevailing torque range added for performance assessment. Percent specification pass rates for the all combinations of fastener material, adhesive, and assembly condition are tabulated and reveal use of anaerobic adhesive as a prevailing torque locking feature is viable. Although not every possible fastener material and anaerobic adhesive combination provides prevailing torque values within specification, any combination can be assessed using the test procedures presented. Reuse without additional anaerobic adhesive generally provides some prevailing torque, and in some cases within specification. Reuse with additional adhesive often provides comparable removal torque data as in initial use.

29 CFR 1915.135 - Powder actuated fastening tools.

Code of Federal Regulations, 2013 CFR

2013-07-01

... tile, surface hardened steel, glass block, live rock, face brick or hollow title. (5) Fasteners shall... into materials such as brick or concrete within 3 inches of the unsupported edge or corner, or into...

29 CFR 1915.135 - Powder actuated fastening tools.

Code of Federal Regulations, 2012 CFR

2012-07-01

... tile, surface hardened steel, glass block, live rock, face brick or hollow title. (5) Fasteners shall... into materials such as brick or concrete within 3 inches of the unsupported edge or corner, or into...

29 CFR 1915.135 - Powder actuated fastening tools.

Code of Federal Regulations, 2011 CFR

2011-07-01

... tile, surface hardened steel, glass block, live rock, face brick or hollow title. (5) Fasteners shall... into materials such as brick or concrete within 3 inches of the unsupported edge or corner, or into...

29 CFR 1915.135 - Powder actuated fastening tools.

Code of Federal Regulations, 2014 CFR

2014-07-01

... tile, surface hardened steel, glass block, live rock, face brick or hollow title. (5) Fasteners shall... into materials such as brick or concrete within 3 inches of the unsupported edge or corner, or into...

Proceedings : Direct Fixation Fastener Workshop

DOT National Transportation Integrated Search

1985-06-01

This report is a collection of papers and discussion transcripts from a workshop on direct fixation fastener systems (DFFS) that are increasingly being used in the construction of modern rail transit systems and system extensions. Preservice testing,...

Quick-sealing design for radiological containment

DOEpatents

Rampolia, Donald S.; Speer, Elmer

1990-01-01

A quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed.

Quick-sealing design for radiological containment

DOEpatents

Rampolla, Donald S.; Speer, Elmer

1991-01-01

A quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed.

Torque Tension Testing of Fasteners used for NASA Flight Hardware Applications

NASA Technical Reports Server (NTRS)

Hemminger, Edgar G.; Posey, Alan J.; Dube, Michael J.

2014-01-01

The effect of various lubricants and other compounds on fastener torque-tension relationships is evaluated. Testing was performed using a unique test apparatus developed by Posey at the NASA Goddard Space Flight Center. A description of the test methodology, including associated data collection and analysis will be presented. Test results for 300 series CRES and A286 heat resistant fasteners, torqued into various types of inserts will be presented. The primary objective of this testing was to obtain torque-tension data for use on NASA flight projects.

Development of a truss joint for robotic assembly of space structures

NASA Technical Reports Server (NTRS)

Parma, George F.

1992-01-01

This report presents the results of a detailed study of mechanical fasteners which were designed to facilitate robotic assembly of structures. Design requirements for robotic structural assembly were developed, taking into account structural properties and overall system design, and four candidate fasteners were designed to meet them. These fasteners were built and evaluated in the laboratory, and the Hammer-Head joint was chosen as superior overall. It had a high reliability of fastening under misalignments of 2.54 mm (0.1 in) and 3 deg, the highest end fixity (2.18), the simplest end effector, an integral capture guide, good visual verification, and the lightest weight (782 g, 1.72 lb). The study found that a good design should incorporate chamfers sliding on chamfers, cylinders sliding on chamfers, and hard surface finishes on sliding surfaces. The study also comments on robot flexibility, sag, hysteresis, thermal expansion, and friction which were observed during the testing.

Threaded Fastener Positive Anti-Rotation Locking Device

NASA Technical Reports Server (NTRS)

Hartman, Timm E. (Inventor); Hanlon, Casey (Inventor); Laidlaw, Mitchell (Inventor); Geck, Kellan (Inventor)

2015-01-01

An apparatus includes a shaft, a device, a fastener, and an anti-rotation clip. The shaft is configured for rotation. The device is mounted on, and surrounds at least a portion of, the shaft, and has first and second protrusions that are formed on one side and are spaced apart to define a tab space. The fastener is rotationally mounted relative to the shaft, and includes a tab slot formed in its outer surface that extends radially inwardly and is disposed radially inwardly of the tab space. The anti-rotation clip includes a main body portion and a head portion that has a first tab portion and a second tab portion. At least a portion the main body portion is disposed between the device and the fastener, the first tab is disposed in the tab space, and the second tab is disposed in the tab slot.

Willingness to use safety belt and levels of injury in car accidents.

PubMed

de Lapparent, Matthieu

2008-05-01

In this article, we develop a bivariate ordered Probit model to analyze the decision to fasten the safety belt in a car and the resulting severity of accidents if it happens. The approach takes into account the fact that the decision to fasten the safety belt has a direct causal effect on the category of injury if an accident happens. Our application to a sample drawn from the database of French accident reports in 2003 for three populations of car users (drivers, front passengers, rear passengers) shows that fastening the safety belt is significantly related to a decrease in severe injuries but it shows also that these car users compensate partly for this safety benefit. Furthermore, it is observed that demographic characteristics of car users, as well as transport facilities, play important roles in decisions to fasten safety belts and in the eventual resulting accident injuries.

[Biomechanical performance of different wires and cable fixation devices in posterior instrumentation for atlantoaxial instability].

PubMed

Liu, Tie-long; Yan, Wang-jun; Han, Yu; Ye, Xiao-jian; Jia, Lian-shun; Li, Jia-shun; Yuan, Wen

2010-05-01

To compare the biomechanical performances of different wires and cable fixation devices in posterior instrumentation for atlantoaxial instability, and test the effect of different fixation strengths and fixation approaches on the surgical outcomes. Six specimens of the atlantoaxial complex (C0-C3) were used to establish models of the normal complex, unstable complex (type II odontoid fracture) and fixed complex. On the wd-5 mechanical testing machine, the parameters including the strength and rigidity of anti-rotation, change and strength of stress, and stability were measured for the normal complex, atlantoaxial instability complex, the new type titanium cable fixation system, Atlas titanium cable, Songer titanium cable, and stainless wire. The strength and rigidity of anti-rotation, change and strength of stress, stability of flexion, extension and lateral bending of the unstable atlantoaxial complex fixed by the new double locking titanium cable fixation system were superior to those of the Songer or Atlas titanium cable (P<0.05) and medical stainless wire (P<0.05). Simultaneous cable fastening on both sides resulted in better fixation effect than successive cable fastening (P<0.05). Better fixation effect was achieved by fastening the specimen following a rest (P<0.05). The fixation effects can be enhanced by increased fastening strengths. The new type double locking titanium cable fixation system has better biomechanical performance than the conventional Songer and Atlas titanium cables. Fastening the unstable specimens after a rest following simultaneous fastening of the specimen on both sides produces better fixation effect.

Mechanistic design of concrete crossties and fastening systems - Phase 1.

DOT National Transportation Integrated Search

2017-04-28

The objective of this project is the development and deployment of resilient concrete crossties and fastening systems for heavy haul freight, intercity passenger, and rail transit applications. : For a variety of reasons, concrete crossties are a dom...

Performance of Rail Fastening Systems on an Open-Deck Bridge

DOT National Transportation Integrated Search

2018-02-01

Transportation Technology Center, Inc. (TTCI) monitored the performance of rail fasteners on an open-deck bridge and its approaches, located at Norfolk Southern Corporations (NS's) eastern mega site. The project was co-sponsored by the Federal Rai...

29 CFR 1915.135 - Powder actuated fastening tools.

Code of Federal Regulations, 2010 CFR

2010-07-01

... into materials such as brick or concrete within 3 inches of the unsupported edge or corner, or into... 2×4 inch lumber to a concrete surface, fasteners of greater than 7/32 inch shank diameter shall not...

Modeling the lateral load distribution for multiple concrete crossties and fastening systems.

DOT National Transportation Integrated Search

2017-01-31

The objective of this project was to further investigate the performance of concrete crosstie and : fastening system under vertical and lateral wheel load using finite element analysis, and explore : possible improvement for current track design stan...

Development of a 3D FEM model for concrete tie and fastening systems.

DOT National Transportation Integrated Search

2015-01-31

This project conducted detailed finite element (FE) modeling of the concrete crosstie and fastening system to better understand the mechanisms through which loads transfer within various track components in the lateral direction. This was completed b...

Detecting hidden exfoliation corrosion in aircraft wing skins using thermography

NASA Astrophysics Data System (ADS)

Prati, John

2000-03-01

A thermal wave (pulse) thermography inspection technique demonstrated the ability to detect hidden subsurface exfoliation corrosion adjacent to countersunk fasteners in aircraft wing skins. In the wing skin, exfoliation corrosion is the result of the interaction between the steel fastener and the aluminum skin material in the presence of moisture. This interaction results in corrosion cracks that tend to grow parallel to the skin surface. The inspection technique developed allows rapid detection and evaluation of hidden (not visible on the surface) corrosion, which extends beyond the head of fastener countersinks in the aluminum skins.

Push type fastener

NASA Technical Reports Server (NTRS)

Jackson, Steven A. (Inventor)

1994-01-01

A push type fastener for fastening a movable structural part (41) to a fixed structural part (43), wherein the coupling and decoupling actions are both a push type operation, the fastener consisting of a plunger (12) having a shank (20) with a plunger head (18) at one end and a threaded end portion (26a) at the other end, an expandable grommet (14) adapted to receive the plunger shank (20) therethrough, and an attachable head (16) which is securable to the threaded end of the plunger shank (20). The fastener (10) requires each structural part (41, 43) to be provided with an aperture (45, 46) and the attachable head (16) to be smaller than the aperture (46) in the second structural part. The plunger (12) is extensible through the grommet (14) and is structurally configured with an external camming surface (25) which is cooperatively engageable with internal surfaces (38) of the grommet so that when the plunger is inserted in the grommet, the relative positioning of said cooperable camming surfaces determines the expansion of the grommet. Coupling of the parts is effected when the grommet is inserted in the aperture (46) in the fixed structural part (43) and expanded by pushing the plunger head (18) and plunger at least a minimal distance through the grommet. Decoupling is effected by pushing the attachable head (16).

Impact Study of Metal Fasteners in Roofing Assemblies using Three-Dimensional Heat Transfer Analysis

DOE PAGES

Singh, Manan; Gulati, Rupesh; Ravi, Srinivasan; ...

2016-11-29

Heat transfer analysis was performed on typical roofing assemblies using HEAT3, a three-dimensional heat transfer analysis software. The difference in heat transferred through the roofing assemblies considered is compared between two cases - without any steel fasteners and with steel fasteners. In the latter case, the metal roofing fasteners were arranged as per Factor Mutual Global (FMG) approvals, in the field, perimeter, and corner zones of the roof. The temperature conditions used for the analysis represented summer and winter conditions for three separate Climate Zones (CZ) namely Climate Zone 2 or CZ2 represented by Orlando, FL; CZ3 represented by Atlanta,more » GA; and CZ6 zone represented by St. Paul, MN. In all the climatic conditions, higher energy transfer was observed with increase in the number of metal fasteners attributed to high thermal conductivity of metals as compared to the insulation and other materials used in the roofing assembly. This difference in heat loss was also quantified in the form of percentage change in the overall or effective insulation of the roofing assembly for better understanding of the practical aspects. Besides, a comparison of 2D heat transfer analysis (using THERM software) and 3D analysis using HEAT3 is also discussed.« less

Impact Study of Metal Fasteners in Roofing Assemblies using Three-Dimensional Heat Transfer Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Manan; Gulati, Rupesh; Ravi, Srinivasan

Heat transfer analysis was performed on typical roofing assemblies using HEAT3, a three-dimensional heat transfer analysis software. The difference in heat transferred through the roofing assemblies considered is compared between two cases - without any steel fasteners and with steel fasteners. In the latter case, the metal roofing fasteners were arranged as per Factor Mutual Global (FMG) approvals, in the field, perimeter, and corner zones of the roof. The temperature conditions used for the analysis represented summer and winter conditions for three separate Climate Zones (CZ) namely Climate Zone 2 or CZ2 represented by Orlando, FL; CZ3 represented by Atlanta,more » GA; and CZ6 zone represented by St. Paul, MN. In all the climatic conditions, higher energy transfer was observed with increase in the number of metal fasteners attributed to high thermal conductivity of metals as compared to the insulation and other materials used in the roofing assembly. This difference in heat loss was also quantified in the form of percentage change in the overall or effective insulation of the roofing assembly for better understanding of the practical aspects. Besides, a comparison of 2D heat transfer analysis (using THERM software) and 3D analysis using HEAT3 is also discussed.« less

A robust multi-frequency mixing algorithm for suppression of rivet signal in GMR inspection of riveted structures

NASA Astrophysics Data System (ADS)

Safdernejad, Morteza S.; Karpenko, Oleksii; Ye, Chaofeng; Udpa, Lalita; Udpa, Satish

2016-02-01

The advent of Giant Magneto-Resistive (GMR) technology permits development of novel highly sensitive array probes for Eddy Current (EC) inspection of multi-layer riveted structures. Multi-frequency GMR measurements with different EC pene-tration depths show promise for detection of bottom layer notches at fastener sites. However, the distortion of the induced magnetic field due to flaws is dominated by the strong fastener signal, which makes defect detection and classification a challenging prob-lem. This issue is more pronounced for ferromagnetic fasteners that concentrate most of the magnetic flux. In the present work, a novel multi-frequency mixing algorithm is proposed to suppress rivet signal response and enhance defect detection capability of the GMR array probe. The algorithm is baseline-free and does not require any assumptions about the sample geometry being inspected. Fastener signal suppression is based upon the random sample consensus (RANSAC) method, which iteratively estimates parameters of a mathematical model from a set of observed data with outliers. Bottom layer defects at fastener site are simulated as EDM notches of different length. Performance of the proposed multi-frequency mixing approach is evaluated on finite element data and experimental GMR measurements obtained with unidirectional planar current excitation. Initial results are promising demonstrating the feasibility of the approach.

Fastener Retention Requirements and Practices in Spaceflight Hardware

NASA Technical Reports Server (NTRS)

Dasgupta, Rajib

2004-01-01

This presentation reviews the requirements for safety critical fasteners in spaceflight hardware. Included in the presentation are design guidelines and information for Locking Helicoils, key locked inserts and thinwalled inserts, self locking screws and bolts. locknuts, and a locking adhesives, Loctite and Vibratite.

Measurement Program for Evaluation of Concrete Ties and Fastenings in Transit Track

DOT National Transportation Integrated Search

1979-03-01

This report outlines a measurement program to obtain data on the performance of standard tie designs and associated fastening systems under field service conditions. In addition, the program identifies limited data to be obtained from a wood tie trac...

Improved Concrete Crosstie and Fastening Systems for US High Speed Passenger Rail and Joint Corridors : Volume 1, Project Summary Report

DOT National Transportation Integrated Search

2017-11-01

Rail corridors often experience a wide variety of passenger and freight train loads, track geometry characteristics, and environmental conditions. These factors must be considered when developing an optimized concrete crosstie and fastening sys...

Data Analysis and Instrumentation Requirements for Evaluating Rail Joints and Rail Fasteners in Urban Track

DOT National Transportation Integrated Search

1975-02-01

Rail fasteners for concrete ties and direct fixation and bolted rail joints have been identified as key components for improving track performance. However, the lack of statistical load data limits the development of improved design criteria and eval...

Influence of clamp-up force on the strength of bolted composite joints

NASA Astrophysics Data System (ADS)

Horn, Walter J.; Schmitt, Ron R.

1994-03-01

Composite materials offer the potential for a reduction in the number of individual parts and joints in a structure because large one-piece components can replace multipart assemblies. Nevertheless, there are many situations where composite parts must be joined and often mechanical fasteners provide the only practical method of joining those parts. The long-term strength of mechanically fastened joints of composite members can be directly affected by the clamp-up force of the fastener and thus perhaps by the relaxation of this force due to the viscoelastic character of the composite materials of the joint. Methods for predicting the effect of bolt clamp-up force relaxation on the strength of mechanically fastened joints of thermoplastic composite materials were investigated during the present study. A test program, using two thermoplastic composite materials, was conducted to determine the influence of clamp-up force on joint strength, to measure the relaxation of the joint clamp-up force with time, and to measure the change of joint strength as a function of time.

Track component property tests : property tests volume 1 : rail, tie, and fasteners.

DOT National Transportation Integrated Search

1979-08-01

This report describes the test procedures and the results of tests on the physical properties of rail, tie and fastener. The properties obtained are the bending rigidity of the tie, bending rigidity of the rail in both the vertical and lateral planes...

Structurally compliant microbearing devices and methods thereof

NASA Technical Reports Server (NTRS)

Boedo, Stephen (Inventor); Grande, William (Inventor)

2011-01-01

A microbearing device includes at least one inner bearing structure, at least one outer bearing structure, and one or more fasteners. Each of the one or more fasteners is connected between the inner bearing structure and the outer bearing structure and the inner bearing structure is substantially elastic.

NDI method to locate intergranular corrosion around fastener holes in aluminum wing skins

NASA Astrophysics Data System (ADS)

Rutherford, Paul S.

1998-03-01

Contact between galvanically dissimilar metals, such as cadmium plated steel fasteners and aluminum wing skins are known to be a source of corrosion. There is a design requirement to fill the void between the contacting surfaces of steel fasteners with a wet sealant. However, if the contacting surface is damaged or a void exists between the fastener head and the aluminum skin, moisture can collect and intergranular corrosion may occur along aluminum grain boundaries, which run parallel to the surface of the wing skin. If intergranular corrosion is allowed to propagate, delamination of the thin layers of aluminum, known as exfoliation corrosion will occur. When this intergranular corrosion reaches an exfoliated state, extensive rework is involved in removing the corrosion. This paper discusses the results of a USAF E-3A Engineering Service Task 89-E3B3-16 to develop a nondestructive inspection procedure to detect intergranular corrosion in an incipient state before it reaches exfoliation. Eddy current and ultrasonic inspection techniques were evaluated. A novel ultrasonic pulse echo technique was developed which utilizes a focus transducer with a hand held fixture. Inspections were performed on test parts which were removed from the upper wing skin of a retired 707 which had varying degrees of intergranular and exfoliation corrosion. Inspection results are compared to the results from the mechanical rework of the wing skin and dissection of a wing skin fastener hole.

Skin, Stringer, and Fastener Loads in Buckled Fuselage Panels

NASA Technical Reports Server (NTRS)

Young, Richard D.; Rose, Cheryl A.; Starnes, James H., Jr.

2001-01-01

The results of a numerical study to assess the effect of skin buckling on the internal load distribution in a stiffened fuselage panel, with and without longitudinal cracks, are presented. In addition, the impact of changes in the internal loads on the fatigue life and residual strength of a fuselage panel is assessed. A generic narrow-body fuselage panel is considered. The entire panel is modeled using shell elements and considerable detail is included to represent the geometric-nonlinear response of the buckled skin, cross section deformation of the stiffening components, and details of the skin-string attachment with discrete fasteners. Results are presented for a fixed internal pressure and various combinations of axial tension or compression loads. Results illustrating the effect of skin buckling on the stress distribution in the skin and stringer, and fastener loads are presented. Results are presented for the pristine structure, and for cases where damage is introduced in the form of a longitudinal crack adjacent to the stringer, or failed fastener elements. The results indicate that axial compression loads and skin buckling can have a significant effect on the circumferential stress in the skin, and fastener loads, which will influence damage initiation, and a comparable effect on stress intensity factors for cases with cracks. The effects on stress intensity factors will influence damage propagation rates and the residual strength of the panel.

Tree nut oils

USDA-ARS?s Scientific Manuscript database

The major tree nuts include almonds, Brazil nuts, cashew nuts, hazelnuts, macadamia nuts, pecans, pine nuts, pistachio nuts, and walnuts. Tree nut oils are appreciated in food applications because of their flavors and are generally more expensive than other gourmet oils. Research during the last de...

78 FR 72561 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... and a skin crack in section 41 of the fuselage, and multiple reports of cracked or missing fastener heads. This AD requires repetitive inspections for cracking of the fuselage skin, discrepant fasteners... disbonding and subsequent cracking of the skin panels. DATES: This AD is effective January 7, 2014. The...

76 FR 61036 - Airworthiness Directives; Gulfstream Aerospace LP Model Galaxy and Gulfstream 200 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-03

...-conformity with certified mechanical properties of this fastener can potentially lead to an unsafe condition... hardness. Non-conformity with certified mechanical properties of this fastener can potentially lead to an... resulted from hydrogen embrittlement combined with high hardness. Non-conformity with certified mechanical...

49 CFR 238.429 - Safety appliances.

Code of Federal Regulations, 2012 CFR

2012-10-01

... appliance mechanical strength and fasteners. (1) All handrails, handholds, and sill steps shall be made of 1-inch diameter steel pipe, 5/8-inch thickness steel, or a material of equal or greater mechanical strength. (2) All safety appliances shall be securely fastened to the car body structure with mechanical...

25 CFR 307.11 - Certificates fastened to fabrics.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Certificates fastened to fabrics. 307.11 Section 307.11 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO ALL-WOOL WOVEN FABRICS; USE OF... the hand seal press furnished by the Indian Arts and Crafts Board. ...

Fastener corrosion : testing, research, and design considerations

Treesearch

Douglas R. Rammer; Samuel L. Zelinka; Philip Line

2006-01-01

In 2004, the voluntary removal of chromated copper arsenate (CCA) from residential wood construction raised concern about corrosion of metal fasteners in wood treated with replacement preservatives. Replacement preservatives contain more copper, which may increase corrosion, and do not contain chromates or arsenates, which are known corrosion inhibitors. This paper is...

49 CFR 393.102 - What are the minimum performance criteria for cargo securement devices and systems?

Code of Federal Regulations, 2010 CFR

2010-10-01

... chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening... acceleration in a lateral direction. (2) Working Load limit. Tiedown assemblies (including chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening devices used to...

49 CFR 393.102 - What are the minimum performance criteria for cargo securement devices and systems?

Code of Federal Regulations, 2011 CFR

2011-10-01

... chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening... acceleration in a lateral direction. (2) Working Load limit. Tiedown assemblies (including chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening devices used to...

30 CFR 7.308 - Lockwasher equivalency test.

Code of Federal Regulations, 2014 CFR

2014-07-01

... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

30 CFR 7.308 - Lockwasher equivalency test.

Code of Federal Regulations, 2011 CFR

2011-07-01

... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

30 CFR 7.308 - Lockwasher equivalency test.

Code of Federal Regulations, 2013 CFR

2013-07-01

... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

30 CFR 7.308 - Lockwasher equivalency test.

Code of Federal Regulations, 2012 CFR

2012-07-01

... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

30 CFR 7.308 - Lockwasher equivalency test.

Code of Federal Regulations, 2010 CFR

2010-07-01

... hole and continuously and uniformly tightened at a speed not to exceed 30 rpm until the fastening's... cycles. (b) Acceptable performance. The minimum torque value required to start removal of the fastening from the installed position (minimum breakway torque) for any cycle of any test sample shall be greater...

49 CFR 393.102 - What are the minimum performance criteria for cargo securement devices and systems?

Code of Federal Regulations, 2012 CFR

2012-10-01

... chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening..., steel strapping, synthetic webbing, and cordage) and other attachment or fastening devices used to... contained within the structure of the vehicle. Securement systems must provide a downward force equivalent...

49 CFR 238.429 - Safety appliances.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-inch diameter steel pipe, 5/8-inch thickness steel, or a material of equal or greater mechanical strength. (2) All safety appliances shall be securely fastened to the car body structure with mechanical fasteners that have mechanical strength greater than or equal to that of a 1/2-inch diameter SAE grade steel...

49 CFR 393.102 - What are the minimum performance criteria for cargo securement devices and systems?

Code of Federal Regulations, 2014 CFR

2014-10-01

... chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening..., steel strapping, synthetic webbing, and cordage) and other attachment or fastening devices used to... contained within the structure of the vehicle. Securement systems must provide a downward force equivalent...

49 CFR 393.102 - What are the minimum performance criteria for cargo securement devices and systems?

Code of Federal Regulations, 2013 CFR

2013-10-01

... chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening..., steel strapping, synthetic webbing, and cordage) and other attachment or fastening devices used to... contained within the structure of the vehicle. Securement systems must provide a downward force equivalent...

49 CFR 238.429 - Safety appliances.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-inch diameter steel pipe, 5/8-inch thickness steel, or a material of equal or greater mechanical strength. (2) All safety appliances shall be securely fastened to the car body structure with mechanical fasteners that have mechanical strength greater than or equal to that of a 1/2-inch diameter SAE grade steel...

75 FR 22424 - Avalotis Corp.; Grant of a Permanent Variance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... International, LLC, and Matrix Service Industrial Contractors, Inc.), and 71 FR 10557 (Commonwealth Dynamics... of damage or defects at all times. (b) Guide rope fastening and alignment tension. The employer must fasten one end of each guide rope securely to the overhead support, with appropriate tension applied at...

78 FR 4042 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

... provides an option for a high frequency eddy current inspection for cracking of the critical fastener holes... for a high frequency eddy current inspection for cracking of the critical fastener holes, and repair..., August 9, 2007)), do a high frequency eddy current (HFEC) inspection for cracking of the four critical...

Tree Nut Allergies

MedlinePlus

... Blog Vision Awards Common Allergens Tree Nut Allergy Tree Nut Allergy Learn about tree nut allergy, how ... a Tree Nut Label card . Allergic Reactions to Tree Nuts Tree nuts can cause a severe and ...

Effects of long-term exposure on LDEF fastener assemblies

NASA Astrophysics Data System (ADS)

Spear, Steve; Dursch, Harry

1992-09-01

This presentation summarizes the Systems Special Investigations Group (SIG) findings from testing and analysis of fastener assemblies used on the Long Duration Exposure Facility (LDEF) structure, the tray mounting clamps, and by the various experimenters. The LDEF deintegration team and several experimenters noted severe fastener damage and hardware removal difficulties during post-flight activities. The System SIG has investigated all reported instances, and in all cases examined to date, the difficulties were attributed to galling during installation or post-flight removal. To date, no evidence of coldwelding was found. Correct selection of materials and lubricants as well as proper mechanical procedures is essential to ensure successful on-orbit or post-flight installation and removal of hardware.

The effect of various systems of fastening of the auxiliary reflector on the parameters of an ADE type antenna

NASA Astrophysics Data System (ADS)

Buzuev, Iu. B.; Erukhimovich, Iu. A.; Litinskii, O. A.; Timofeeva, A. A.

1980-09-01

An experimental study is presented of the influence of various systems of fastening of the auxiliary reflector on the parameters of an ADE type antenna operating at a frequency of 11 GHz. Two fastening systems are recommended: (1) a toroidal shell made of glass-reinforced polyurethane foam (gamma = 0.1-0.2 g/cu cm) with special designed inner and outer air/dielectric interfaces; and (2) the complete or partial filling of the space between the walls of the horn and the surface of the auxiliary reflector by polyurethane foam (gamma = 0.03 g/cu cm), the outer surface being glass-fiber-reinforced.

Effects of long-term exposure on LDEF fastener assemblies

NASA Technical Reports Server (NTRS)

Spear, Steve; Dursch, Harry

1992-01-01

This presentation summarizes the Systems Special Investigations Group (SIG) findings from testing and analysis of fastener assemblies used on the Long Duration Exposure Facility (LDEF) structure, the tray mounting clamps, and by the various experimenters. The LDEF deintegration team and several experimenters noted severe fastener damage and hardware removal difficulties during post-flight activities. The System SIG has investigated all reported instances, and in all cases examined to date, the difficulties were attributed to galling during installation or post-flight removal. To date, no evidence of coldwelding was found. Correct selection of materials and lubricants as well as proper mechanical procedures is essential to ensure successful on-orbit or post-flight installation and removal of hardware.

Urine cup for collection of urine from cows.

PubMed

Fellner, V; Weiss, M F; Belo, A T; Belyea, R L; Martz, F A; Orma, A H

1988-08-01

A urine cup for continuous and complete collection of urine from cows was constructed from Plastisol, cotton webb strapping, Velcro Brand touch fasteners [corrected], snap-fasteners, denim patches, weather stripping, and vacuum hose. The urine cup was made from Plastisol using a heated lead mold. It was large enough to enclose a 9 cm x 6 cm area around the vulva of a cow and was attached by strapping and Velcro Brand touch fasteners [corrected] to patches glued to the rump. Urine cups were used repeatedly and provided for long-term collection of urine from cows, eliminating the need for indwelling catheters. Applications include long-term nutrient balance, radioisotope, and metabolism studies.

Low percentage of clinically relevant pistachio nut and mango co-sensitisation in cashew nut sensitised children.

PubMed

van der Valk, J P M; Bouche, R El; Gerth van Wijk, R; de Groot, H; Wichers, H J; Dubois, A E J; de Jong, N W

2017-01-01

Cashew nut, pistachio nut and mango belong to the Anacardiaceae family and are botanically related. Therefore, cashew nut sensitised children are frequently advised to eliminate cashew nuts and pistachio nuts from their diet. The 'Improvement of Diagnostic mEthods for ALlergy assessment (IDEAL trial number NTR3572) study showed that cashew nut sensitised children were co-sensitised to pistachio nut in 98% of cases and to mango in 21% of cases. The aim of this follow-up study to IDEAL is to assess the clinical relevance of co-sensitisation to pistachio nut and mango in cashew nut sensitised children. Children were recruited from the study: 'Improvement of Diagnostic mEthods for ALlergy assessment (IDEAL trial number NTR3572). Inclusion criterion for the IDEAL study was sensitization to cashew nut as demonstrated by either SPT or sIgE, and a clinical history of reactions to cashew nuts or no previous (known) exposure. Sensitized children who were tolerant to cashew nuts were excluded. Inclusion criterion for this IDEAL follow-up study was co-sensitization to pistachio nut, regardless the result of the DBPCFC with cashew nut. In this follow-up study a double-blind placebo-controlled food challenge with pistachio nut and an open food challenge with mango were performed. Twenty-nine children (mean age of 11.6 years, 62% male) were included. Pistachio nut sensitisation was clinically relevant in only 34% of cashew-sensitised children and only 31% of cashew challenge positive children. None of the children was challenge positive to mango. Although co-sensitisation between cashew nut and pistachio nut was observed in 98%, pistachio nut sensitisation was only clinically relevant in 34% of the children. Therefore, a challenge test with pistachio nut is recommended in children with cashew nut and pistachio nut sensitisation. Trial registration The study was registered in the Dutch trial register (registration number 3572) on 10 August 2012 (retrospectively registered).

Optical method for measuring the surface area of a threaded fastener

Treesearch

Douglas Rammer; Samuel Zelinka

2010-01-01

This article highlights major aspects of a new optical technique to determine the surface area of a threaded fastener; the theoretical framework has been reported elsewhere. Specifically, this article describes general surface area expressions used in the analysis, details of image acquisition system, and major image processing steps contained within the measurement...

Joint Networking Command and Control (C2) Communications Among Distributed Operations, JCAS, and Joint Fires

DTIC Science & Technology

2007-06-01

fasteners. Enviromental Spec Storage Temperature: -26 to 160 °F, Operating Temperature: -22 to 160 °F, Operating Humidity Range: 5% to 100% Non...Accessories Double 90° tongue and groove case design, with anti-tamper fasteners. Enviromental Spec Storage Temperature: -26 to 160 °F, Operating

Multiple-bolted joints in wood members : a literature review

Treesearch

Peter James Moss

1997-01-01

This study reviewed the literature on experimental and analytical research for the connection of wood members using multiple laterally loaded bolts. From this, the influence of geometric factors were ascertained, such as staggered and aligned fasteners, optimum fastener configurations, row factors and length-to-diameter bolt ratios, spacing, end and edge distances, and...

15 CFR 280.2 - Definitions used in this subpart.

Code of Federal Regulations, 2011 CFR

2011-01-01

... PROGRAMS FASTENER QUALITY General § 280.2 Definitions used in this subpart. In addition to the definitions... the United States Patent and Trademark Office. Act. The Fastener Quality Act (15 U.S.C. 5401 et seq... ISO/IEC Guides or other documents, and redesignations of those Guides or documents. Under Secretary...

15 CFR 280.2 - Definitions used in this subpart.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PROGRAMS FASTENER QUALITY General § 280.2 Definitions used in this subpart. In addition to the definitions... the United States Patent and Trademark Office. Act. The Fastener Quality Act (15 U.S.C. 5401 et seq... ISO/IEC Guides or other documents, and redesignations of those Guides or documents. Under Secretary...

Astronauts Griggs and Hoffman try to fasten devices on end of RMS

NASA Technical Reports Server (NTRS)

1985-01-01

Astronauts S. David Griggs, left, and Jeffrey A. Hoffman join efforts to fasten one of two snag type devices on the end of the Canadian-built remote manipulator system (RMS) arm of the Shuttle Discovery. A partial view of the Earth's horizon can be seen behind the shuttle.

22 CFR 92.17 - Fastening of pages.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Fastening of pages. 92.17 Section 92.17 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES NOTARIAL AND RELATED SERVICES General Notarial... his official seal. [22 FR 10858, Dec. 27, 1957, as amended at 60 FR 51723, Oct. 3, 1995] Specific...

Fasteners. FOS: Fundamentals of Service.

ERIC Educational Resources Information Center

John Deere Co., Moline, IL.

This manual on fasteners (devices used in home and shop to hold things together) is one of a series of power mechanics texts and visual aids on operation, diagnosis, and repair. Materials provide basic information and illustrations for use by vocational students and teachers as well as shop servicemen and laymen. Seven chapters are included: (1)…

77 FR 28328 - Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... loose or missing fastener, a crack, damage, or corrosion and adding an internal doubler to the aft shear... proposed actions are intended to detect a loose or missing fastener, a crack, damage, or corrosion on the T... inspection of the T/R pylon ``components and structure for obvious damage, cracks, corrosion, and security...

76 FR 58098 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

.... ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for all The Boeing... inspections for cracks on the area around certain fasteners of the access opening doubler on the left and... area around certain fasteners of the access opening doubler on the left and right wing center spar...

Fastener Capture Plate Technology to Contain On-Orbit Debris

NASA Technical Reports Server (NTRS)

Eisenhower, Kevin

2010-01-01

The Fastener Capture Plate technology was developed to solve the problem of capturing loose hardware and small fasteners, items that were not originally intended to be disengaged in microgravity, thus preventing them from becoming space debris. This technology was incorporated into astronaut tools designed and successfully used on NASA s Hubble Space Telescope Servicing Mission #4. The technology s ultimate benefit is that it allows a very time-efficient method for disengaging fasteners and removing hardware while minimizing the chances of losing parts or generating debris. The technology aims to simplify the manual labor required of the operator. It does so by optimizing visibility and access to the work site and minimizing the operator's need to be concerned with debris while performing the operations. It has a range of unique features that were developed to minimize task time, as well as maximize the ease and confidence of the astronaut operator. This paper describes the technology and the astronaut tools developed specifically for a complicated on-orbit repair, and it includes photographs of the hardware being used in outer space.

Influence of panel fastening on the acoustic performance of light-weight building elements: Study by sound transmission and laser scanning vibrometry

NASA Astrophysics Data System (ADS)

Roozen, N. B.; Muellner, H.; Labelle, L.; Rychtáriková, M.; Glorieux, C.

2015-06-01

Structural details and workmanship can cause considerable differences in sound insulation properties of timber frame partitions. In this study, the influence of panel fastening is investigated experimentally by means of standardized sound reduction index measurements, supported by detailed scanning laser Doppler vibrometry. In particular the effect of the number of screws used to fasten the panels to the studs, and the tightness of the screws, is studied using seven different configurations of lightweight timber frame building elements. In the frequency range from 300 to 4000 Hz, differences in the weighted sound reduction index RW as large as 10 dB were measured, suggesting that the method of fastening can have a large impact on the acoustic performance of building elements. Using the measured vibrational responses of the element, its acoustic radiation efficiency was computed numerically by means of a Rayleigh integral. The increased radiation efficiency partly explains the reduced sound reduction index. Loosening the screws, or reducing the number of screws, lowers the radiation efficiency, and significantly increases the sound reduction index of the partition.

Does providing written dietary advice improve the ingestion of non-allergic nuts in children with existing nut allergies? - A randomized controlled trial.

PubMed

Norman, M; South, C; Quinn, P; Chan, D; Palmer, S; Netting, M; Gold, M

2016-05-01

Allergy to one or more nuts is common in children and often complete nut avoidance is advised. More recently, introduction of non-allergic nuts into the diet is advised by some allergists. This study aims to determine whether the provision of additional written dietary advice increases the ingestion of non-allergic nuts by children with nut allergy. Secondary aims include determining which factors facilitate or prevent successful inclusion of non-allergic nuts in the diet, and how inclusion influences quality of life, sensitization and the rate of nut reactions. This is a randomized, double-blinded, controlled trial of children with nut allergy who were asked to ingest one or more non-allergic nuts. Participants were 75 children aged 2-16 years (Intervention=36, Control=39), recruited in Adelaide, Australia. Randomized participants were supplied with the intervention (recipe booklet and monthly reminder text messages) or provided standard verbal dietary advice. After 6 months participants were assessed by a blinded investigator with regard to nut ingestion, quality of life, sensitization and nut reactions. The intervention did not increase the ingestion of non-allergic nuts. A negative hospital challenge was a predictor of successful introduction. Parental report of child concern about a reaction was the greatest barrier. Ingestion of non-allergic nuts did not improve quality of life or change nut sensitization. Few nut reactions occurred during the study. Ingestion of non-allergic nuts by children with nut allergy was not improved by additional dietary intervention. Selective introduction of non-allergic nuts is difficult to achieve when the child is anxious about introduction and challenges cannot be done in a medically supervised setting. This dietary intervention did not improve non-allergic nut ingestion by nut allergic children. Hospital challenge increased introduction rates, whilst parentally reported child concern about a reaction reduced success. Non-allergic nut ingestion did not change quality of life or sensitization. © 2016 John Wiley & Sons Ltd.

Textural, Rheological and Sensory Properties and Oxidative Stability of Nut Spreads—A Review

PubMed Central

Shakerardekani, Ahmad; Karim, Roselina; Ghazali, Hasanah Mohd; Chin, Nyuk Ling

2013-01-01

Tree nuts are rich in macro and micronutrients, phytochemicals, tocopherols and phenolic compounds. The development of nut spreads would potentially increase the food uses of nuts and introduce consumers with a healthier, non-animal breakfast snack food. Nut spreads are spreadable products made from nuts that are ground into paste. Roasting and milling (particle size reduction) are two important stages for the production of nut spreads that affected the textural, rheological characteristic and overall quality of the nut spread. Textural, color, and flavor properties of nut spreads play a major role in consumer appeal, buying decisions and eventual consumption. Stability of nut spreads is influenced by its particle size. Proper combination of ingredients (nut paste, sweetener, vegetable oil and protein sources) is also required to ensure a stable nut spread product is produced. Most of the nut spreads behaved like a non-Newtonian pseudo-plastic fluid under yield stress which help the producers how to start pumping and stirring of the nut spreads. Similar to other high oil content products, nut spreads are susceptible to autoxidation. Their oxidation can be controlled by application of antioxidants, using processing techniques that minimize tocopherol and other natural antioxidant losses. PMID:23429239

75 FR 7945 - Airworthiness Directives; Augustair, Inc. Models 2150, 2150A, and 2180 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-23

... inspect the vertical stabilizer front spar for cracks and loose fasteners, repair any cracks and loose fasteners found, and reinforce the vertical stabilizer spar regardless if cracks are found. This AD results from six reports of airplanes with a cracked vertical stabilizer front spar. We are issuing this AD to...

78 FR 70214 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-25

... cracks at the shear tie end fastener locations of the fuselage frames, and repair of cracks if necessary... fastener locations of the fuselage frames, and repair of cracks if necessary. The NPRM also proposed to... the frame shear ties, as stated in the NPRM (78 FR 33012, June 3, 2013). We agree with the request and...

Detection of cracks beneath rivet heads via pulsed eddy current technique

NASA Astrophysics Data System (ADS)

Giguère, J. S. R.; Lepine, B. A.; Dubois, J. M. S.

2002-05-01

Improving the detectability of fatigue cracks under installed fasteners is one of the many goals of the aging aircraft nondestructive evaluation (NDE) community. The pulsed eddy current offers new capabilities to address this requirement. The aim of the paper is to evaluate the potential of this technique for detecting and quantifying notches under installed fasteners.

Development of the weldbond process for joining titanium

NASA Technical Reports Server (NTRS)

Fields, D.

1972-01-01

High quality resistance spot welds were produced by welding through epoxy adhesive on titanium alloys. Weldbond joints were consistently stronger than those of either mechanical fasteners, structural adhesive bonds, or mechanical fasteners with adhesive at the joint interface. Weldbond joints and/or spot weld joints showed superior strength at all temperature ranges as compared to other joints tested.

75 FR 27969 - Airworthiness Directives; The Boeing Company Model 737-100 and -200 Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-19

... cracking and damaged fasteners of certain fuselage frames and stub beams, and corrective actions if... the inboard chord fastener hole of the frame at body station 639, stringer S-16, and corrective... inspections for the repaired or modified frame only. For airplanes on which the modification or repair is done...

Comparing the Methodologies in ASTM G198: Is There an Easy Way Out?

Treesearch

Samuel L. Zelinka

2013-01-01

ASTM(1) G198, Standard test method for determining the relative corrosion performance of driven fasteners in contact with treated wood, was accepted by consensus and published in 2011. The method has two different exposure conditions for determining fastener corrosion performance in treated wood. The first method places the wood and embedded...

Simplified analysis of timber rivet connections

Treesearch

Douglas C. Stahl; Marshall. Begel; Ronald W. Wolfe

2000-01-01

Timber rivets, fasteners for glulam and heavy timber construction, have been used in Canada for about thirty years and recently were adopted by the U.S. National Design Specification for Wood Construction (NDS). Rivet connections can exhibit two failure modes, one of which is fundamentally different from those of other dowel fasteners. Failure can occur when a volume...

77 FR 68061 - Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-15

...) pylon for a loose or missing fastener, a crack, damage, or corrosion and adding an internal doubler to... actions are intended to detect a loose or missing fastener, a crack, damage, or corrosion on the T/R pylon..., a crack, damage, or corrosion, and repairing or replacing the T/R pylon if any of these conditions...

Quality Evaluation of Shelled and Unshelled Macadamia Nuts by Means of Near-Infrared Spectroscopy (NIR).

PubMed

Canneddu, Giovanna; Júnior, Luis Carlos Cunha; de Almeida Teixeira, Gustavo Henrique

2016-07-01

The quality of shelled and unshelled macadamia nuts was assessed by means of Fourier transformed near-infrared (FT-NIR) spectroscopy. Shelled macadamia nuts were sorted as sound nuts; nuts infected by Ecdytolopha aurantiana and Leucopteara coffeella; and cracked nuts caused by germination. Unshelled nuts were sorted as intact nuts (<10% half nuts, 2014); half nuts (March, 2013; November, 2013); and crushed nuts (2014). Peroxide value (PV) and acidity index (AI) were determined according to AOAC. PCA-LDA shelled macadamia nuts classification resulted in 93.2% accurate classification. PLS PV prediction model resulted in a square error of prediction (SEP) of 3.45 meq/kg, and a prediction coefficient determination value (Rp (2) ) of 0.72. The AI PLS prediction model was better (SEP = 0.14%, Rp (2) = 0.80). Although adequate classification was possible (93.2%), shelled nuts must not contain live insects, therefore the classification accuracy was not satisfactory. FT-NIR spectroscopy can be successfully used to predict PV and AI in unshelled macadamia nuts, though. © 2016 Institute of Food Technologists®

Mechanical connection for a tubular assembly

DOEpatents

Grover, J.M.

1984-09-12

Disclosed is a mechanical connection assembly for connecting two telescopically related parts together in a fluidtight relation. The system uses snap-in fasteners having flexible barbed tangs which are snapped into receiving holes formed in the parts being attached together. A locking pin can be inserted into a central aperture through the snap-in fastener to secure the fastener in the receiving holes. The system also includes a seal having sealing surfaces at least one of which is formed at an angle inclined relative to a true vertical. a metallic sealing element is interposed between the sealing surfaces. The geometry of the sealing surfaces is capable of compensating for the differential thermal growth rates occurring when the two parts are made from dissimilar metals.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janardhanraj, S.; Jagadeesh, G., E-mail: jaggie@aero.iisc.ernet.in

A novel concept to generate miniature shockwaves in a safe, repeatable, and controllable manner in laboratory confinements using an in situ oxyhydrogen generator has been proposed and demonstrated. This method proves to be more advantageous than existing methods because there is flexibility to vary strength of the shockwave, there is no need for storage of high pressure gases, and there is minimal waste disposal. The required amount of oxyhydrogen mixture is generated using alkaline electrolysis that produces hydrogen and oxygen gases in stoichiometric quantity. The rate of oxyhydrogen mixture production for the newly designed oxyhydrogen generator is found to bemore » around 8 ml/s experimentally. The oxyhydrogen generator is connected to the driver section of a specially designed 10 mm square miniature shock tube assembly. A numerical code that uses CANTERA software package is used to predict the properties of the driver gas in the miniature shock tube. This prediction along with the 1-D shock tube theory is used to calculate the properties of the generated shockwave and matches reasonably well with the experimentally obtained values for oxyhydrogen mixture fill pressures less than 2.5 bars. The miniature shock tube employs a modified tri-clover clamp assembly to facilitate quick changing of diaphragm and replaces the more cumbersome nut and bolt system of fastening components. The versatile nature of oxyhydrogen detonation-driven miniature shock tube opens up new horizons for shockwave-assisted interdisciplinary applications.« less

Novel use of a percutaneous endoscopic gastrostomy tube fastener for securing silicone tracheal stents in patients with benign proximal airway obstruction.

PubMed

Musani, Ali I; Jensen, Kurt; Mitchell, John D; Weyant, Michael; Garces, Katherine; Hsia, David

2012-04-01

Benign tracheal obstruction occurs for a variety of reasons. Bronchoscopic intervention includes silicone stent placement, which effectively maintains airway patency. Stent migration is a common complication, particularly when placed in the proximal trachea. We used a novel technique of securing tracheal stents with a percutaneous endoscopic gastrostomy tube fastener (PEG-TF) to prevent stent migration. The purpose of this study was to determine the feasibility of securing silicone stents in the proximal trachea with PEG-TF. Silicone stents were placed under general anesthesia by rigid bronchoscopy in 7 consecutive patients with inoperable benign proximal tracheal obstruction. PEG-TFs were placed under sterile conditions with direct bronchoscopic visualization. A needle was inserted through the anterior neck and silicone stent wall allowing stylet introduction of a T-fastener into the interior of the stent. The T-fastener was secured externally by a metal clamp and cotton pledget at the surface of the neck. Patients had routine outpatient follow-up and covered the external portion of the PEG-TF with a waterproof dressing when showering. All 7 PEG-TFs were placed without complications. The PEG-TFs were left in for 1 to 25 weeks. Complications of the PEG-TF included localized cellulitis and suture breakage. No stent migration occurred while the fastener was in place. Two stents were removed within 2 weeks due to patient's difficulty tolerating the stent. Securing silicone stents in the proximal trachea is feasible and may prevent stent migration, but further study and possible modification of the PEG-TF device are needed.

Online LC-GC-based analysis of minor lipids in various tree nuts and peanuts.

PubMed

Esche, Rebecca; Müller, Luisa; Engel, Karl-Heinz

2013-11-27

As information on free sterols/stanols and steryl/stanyl esters in nuts is lacking, the compositions and contents of these lipid constituents in ten different nut types were analyzed. The applied approach was based on online liquid chromatography-gas chromatography and enabled the simultaneous analysis of free sterols/stanols and individual steryl/stanyl fatty acid esters, and additionally of tocopherols and squalene. Total contents of free sterols/stanols ranged from 0.62 mg/g nut in hazelnuts to 1.61 mg/g nut in pistachios, with sitosterol as the predominant compound. Total contents of steryl/stanyl fatty acid esters were in the range of 0.11-1.26 mg/g nut, being lowest in Brazil nuts and highest in pistachios. There were considerable differences between the various nut types not only regarding the contents, but also the compositions of both classes. The levels of tocopherols were highest in pine nuts (0.33 mg/g nut); those of squalene were remarkably high in Brazil nuts (1.11 mg/g nut).

The effect of moisture content on the corrosion of fasteners embedded in wood subjected to alkaline copper quaternary treatment

Treesearch

Samuel L. Zelinka; Samuel V. Glass; Dominique Derome

2014-01-01

This paper characterizes the corrosion rate of embedded fasteners as a function of wood moisture content using gravimetric and electrochemical measurements. The results indicated that the corrosion rate increased with moisture content before reaching a plateau. The phases present in the corrosion products, as analyzed using X-ray diffraction, are generally consistent...

Mechanism of Transport Through Wood Cell Wall Polymers

Treesearch

Joseph E. Jakes; Nayomi Plaza; Donald S. Stone; Christopher G. Hunt; Samuel V. Glass; Samuel L. Zelinka

2013-01-01

The movement of chemicals through wood is necessary for decay and fastener corrosion to occur in forest products. However, the mechanism responsible for the onset of fastener corrosion and decay in wood is not known. The onset occurs before the formation of free water in wood cavities and aqueous chemical transport would be possible. Here, we propose that the onset...

Electrochemical impedance spectroscopy (EIS) as a tool for measuring corrosion of polymer-coated fasteners used in treated wood

Treesearch

Samuel L. Zelinka; Lorraine Ortiz-Candelaria; Donald S. Stone; Douglas R. Rammer

2009-01-01

Currently, many of the polymer-coated fasteners on the market are designed for improved corrosion performance in treated wood; yet, there is no way to evaluate their corrosion performance. In this study, a common technique for measuring the corrosion performance of polymer-coated metals, electrochemical impedance spectroscopy (EIS), was used to evaluate commercial...

76 FR 72858 - Airworthiness Directives; The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

... of the Station (STA) 348.2 frame to detect cracking under the stop fittings and intercostal flanges... reports of cracking of the STA 348.2 frame above the two outboard fasteners attaching the frame inner... of missing fasteners in the STA 348.2 frame inner chord. This proposed AD would require additional...

75 FR 39185 - Airworthiness Directives; The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... and torque checks of the hanger fittings and strut forward bulkhead of the forward engine mount and... requires repetitive inspections and torque checks of the hanger fittings and strut forward bulkhead of the... corrective actions are replacing the fasteners; removing loose fasteners; tightening all Group A [[Page 39187...

19 CFR 24.13a - Car, compartment, and package seals; and fastenings; standards; acceptance by Customs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Car, compartment, and package seals; and... PROCEDURE § 24.13a Car, compartment, and package seals; and fastenings; standards; acceptance by Customs. (a... identification number on the seal. (2) If the seal is to be used by private industry (i.e., a shipper...

19 CFR 24.13a - Car, compartment, and package seals; and fastenings; standards; acceptance by Customs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Car, compartment, and package seals; and... PROCEDURE § 24.13a Car, compartment, and package seals; and fastenings; standards; acceptance by Customs. (a... identification number on the seal. (2) If the seal is to be used by private industry (i.e., a shipper...

19 CFR 24.13a - Car, compartment, and package seals; and fastenings; standards; acceptance by Customs.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Car, compartment, and package seals; and... PROCEDURE § 24.13a Car, compartment, and package seals; and fastenings; standards; acceptance by Customs. (a... identification number on the seal. (2) If the seal is to be used by private industry (i.e., a shipper...

Transpiration-Cooled Spacecraft-Insulation-Repair Fasteners

NASA Technical Reports Server (NTRS)

Camarda, Charles J.; Pettit, Donald R.; Glass, David; Scotti, Stephen J.; Vaughn, Wallace Lee; Rawal, Suraj

2012-01-01

Transpiration-cooled fasteners are proposed that operate like an open-loop heat pipe (self-tapping screws, bolts, and spikes) for use in on-orbit repair of thermal- insulation of a space shuttle or other spacecraft. By limiting the temperature rise of such a fastener and of the adjacent repair material and thermal protection system, the transpiration cooling would contribute to the ability of the repair to retain its strength and integrity in the high-heat-flux, oxidizing environment of reentry into the atmosphere of the Earth. A typical fastener according to the proposal would include a hollow refractory-metal, refractory-composite, or ceramic screw or bolt, the central cavity of which would be occupied by a porous refractory- metal or ceramic plug that would act as both a reservoir and a wick for a transpirant liquid. The plug dimensions, the plug material, and the sizes of the pores would be chosen in conjunction with the transpirant liquid so that (1) capillary pumping could be relied upon to transport the liquid to the heated surface, where the liquid would be vaporized, and (2) the amount of liquid would suffice for protecting against the anticipated heat flux and integrated heat load.

Space fabrication demonstration system. [beam builder and induction fastening

NASA Technical Reports Server (NTRS)

1980-01-01

The development effort on the composite beam cap fabricator was completed within cost and close to abbreviated goals. The design and analysis of flight weight primary and secondary beam builder structures proceeded satisfactorily but remains curtailed until further funding is made available to complete the work. The induction fastening effort remains within cost and schedule constraints. Tests of the LARC prototype induction welder is continuing in an instrumented test stand comprised of a Dumore drill press (air over oil feed for variable applied loads) and a dynamometer to measure actual welding loads. Continued testing shows that the interface screening must be well impregnated with resin to ensure proper flow when bonding graphite-acrylic lap shear samples. Specimens prepared from 0.030 inch thick graphite-polyethersulfone are also available for future induction fastening evaluation.

[Oral allergy syndrome due to cashew nuts in the patient without pollinosis].

PubMed

Inomata, Naoko; Osuna, Hiroyuki; Ikezawa, Zenro

2006-01-01

A 26-year-old woman felt tingling on her tongue and itching both in the throat and on the face immediately after she put a cashew nut on her tongue. She had a history of atopic dermatitis and bronchial asthma, but not of pollinosis. CAP-FEIA and skin prick test (SPT) were positive for cashew nuts. The results showed negative for peanuts and other tree nuts than cashew nuts. Consequently, she was diagnosed with oral allergy syndrome due to cashew nuts. In addition, the result of skin prick test with cashew nuts normalized one year after she began avoiding cashew nuts, indicating that cashew nuts allergy would be due to sensitization by itself rather than to cross-reactivity between cashew nuts and pollens in this case.

Longitudinal Analysis of Nut-Inclusive Diets and Body Mass Index Among Overweight and Obese African American Women Living in Rural Alabama and Mississippi, 2011-2013.

PubMed

Sterling, Samara R; Bertrand, Brenda; Judd, Suzanne; Carson, Tiffany L; Chandler-Laney, Paula; Baskin, Monica L

2017-09-21

Nuts, when eaten alongside other nutritionally rich foods, may decrease obesity and related chronic disease risks, which are high among African American women in the rural South. We monitored changes in nut intake, other obesity-related foods (fruits, vegetables, red or processed meats, added sugars), and body mass index (BMI) over a 2-year weight loss intervention among 383 overweight and obese African American women in rural Alabama and Mississippi. Two dietary recalls were administered at 4 points over 24 months. Mann-Whitney tests compared differences in median food group intake between nut consumers and non-nut consumers, and t tests identified BMI differences between groups. Mixed linear models tested the relationship between nut intake and intake of the select food groups, and between nut intake and BMI over time. Overall nut consumers ate more fruits and vegetables and less red meat than non-nut consumers. Nut consumers had lower BMI values than non-nut consumers. Weight loss by the end of the intervention was significant for nut consumers but not for non-nut consumers, even after accounting for kilocalorie consumption and physical activity engagement. Nut consumption is associated with consumption of other nutritionally rich foods and lower BMI among African American women in rural Alabama and Mississippi. Future interventions should target increasing daily nut intake, decreasing added sugar intake, and identifying strategies to encourage positive dietary changes to continue after an intervention.

Perceptions and Knowledge of Nuts amongst Health  Professionals in New Zealand.

PubMed

Brown, Rachel C; Yong, Lee Ching; Gray, Andrew R; Tey, Siew Ling; Chisholm, Alexandra; Leong, Sook Ling

2017-03-01

Despite their nutritional value, population-level nut consumption remains low. Studies suggest that individuals would eat more nuts on their doctor's advice, making health professionals potentially important for promoting nut consumption. This cross-sectional study aimed to examine the perceptions and knowledge of nuts and the predictors of nut promotion among health professionals in New Zealand. Dietitians, general practitioners (GPs), and practice nurses were identified from the Electoral Roll and invited to complete a questionnaire (n = 318, 292, and 149 respondents respectively). Over one-fifth of GPs and practice nurses believed that eating nuts could increase blood cholesterol concentrations and cause weight gain. The most common perceptions overall were that nuts are healthy; high in protein, fat, and calories; and are satiating. Nut consumption was recommended for reasons relating to these perceptions and because of nuts' selenium content. Conversely, reasons for suggesting the consumption of fewer nuts included that they were high in calories and fat, would cause weight gain, and concerns regarding allergies and cost. All groups of health professionals were more likely to promote nut consumption if they perceived nuts to reduce the risk of diabetes (all p ≤ 0.034). Education could improve health professionals' knowledge regarding the effects of nut consumption on blood cholesterol and body weight, alongside other health benefits, which should improve the advice given to patients and may thereby increase nut consumption.

Nuts in the prevention and treatment of metabolic syndrome.

PubMed

Salas-Salvadó, Jordi; Guasch-Ferré, Marta; Bulló, Mònica; Sabaté, Joan

2014-07-01

Nuts are rich in many bioactive compounds that can exert beneficial effects on cardiovascular health. We reviewed the evidence relating nut consumption and the metabolic syndrome (MetS) and its components. Nuts reduce the postprandial glycemic response; however, long-term trials of nuts on insulin resistance and glycemic control in diabetic individuals are inconsistent. Epidemiologic studies have shown that nuts may lower the risk of diabetes incidence in women. Few studies have assessed the association between nuts and abdominal obesity, although an inverse association with body mass index and general obesity has been observed. Limited evidence suggests that nuts have a protective effect on blood pressure and endothelial function. Nuts have a cholesterol-lowering effect, but the relation between nuts and hypertriglyceridemia and high-density lipoprotein cholesterol is not well established. A recent pooled analysis of clinical trials showed that nuts are inversely related to triglyceride concentrations only in subjects with hypertriglyceridemia. An inverse association was found between the frequency of nut consumption and the prevalence and the incidence of MetS. Several trials evaluated the effect of nuts on subjects with MetS and found that they may have benefits in some components. Compared with a low-fat diet, a Mediterranean diet enriched with nuts could be beneficial for MetS management. The protective effects on metabolism could be explained by the modulation of inflammation and oxidation. Further trials are needed to clarify the role of nuts in MetS prevention and treatment. © 2014 American Society for Nutrition.

Identification of peanuts and tree nuts: are allergists smarter than their patients?

PubMed

Kao, Leon; Bhangoo, Parmbir S; Roy, Lonnie; Bird, J Andrew

2013-10-01

It has been reported that peanut- or tree nut-allergic individuals and their guardians are poorly capable of differentiating various tree nuts and peanuts. No information exists on the ability of allergists to differentiate peanuts and tree nuts. To measure the ability of allergists and other specialists within the allergy and immunology field to identify various types of tree nuts and peanuts. A nut box with a clear cover was constructed and contained various tree nuts and peanuts in shelled and unshelled forms. Attendees at the 2012 national meeting of the American Academy of Allergy, Asthma, and Immunology were offered participation by viewing the nut box and filling in their responses to a questionnaire. A similar procedure was conducted in the Food Allergy Center at Children's Medical Center (Dallas, TX) for guardians of children with and without peanut or tree nut allergies. Allergists were better able to identify and differentiate tree nuts and peanuts than guardians of peanut- or tree nut-allergic children, guardians of children without food allergies, and allergy and immunology fellows in training. It is important for allergists to educate peanut- and tree nut-allergic individuals and their guardians on the proper avoidance of peanuts and tree nuts. This includes education in the ability to identify peanuts and tree nuts. In addition, allergy and immunology fellows in training may benefit from education in proper peanut and tree nut identification. Copyright © 2013 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Development of failure mechanisms for fasteners in the United States

Treesearch

Douglas R. Rammer; Philip Line

2006-01-01

In the 2001 National Design Specifications® for Wood Construction (NDS), Appendix E was added to explicitly address wood failure mechanisms that may occur in fasteners. One approach to estimate design capacities for net section, row tear out, and group tear failure mechanisms is presented in Appendix E of the 2001 NDS. Since the 2001 NDS, efforts are being untaken to...

Exposure test of fasteners in preservative-treated wood

Treesearch

Samuel L. Zelinka; Douglas R. Rammer

2006-01-01

This study examined nails and screws exposed to ACQ-treated wood for up to 12 months in a controlled environment. The environment (27ºC, 100% relative humidity) was chosen so that comparisons could be made with previous exposure tests run using CCA-treated wood in the same environment. Five types of fasteners (common 8d nail, hot-dipped galvanized 8d nail, 4d aluminum...

Exposure testing of fasteners in preservative treated wood : gravimetric corrosion rates and corrosion product analyses

Treesearch

Samuel L. Zelinka; Rebecca J. Sichel; Donald S. Stone

2010-01-01

Research was conducted to determine the corrosion rates of metals in preservative treated wood and also understand the mechanism of metal corrosion in treated wood. Steel and hot-dip galvanized steel fasteners were embedded in wood treated with one of six preservative treatments and exposed to 27oC at 100% relative humidity for 1 year. The...

Corrosion Behavior of Sacrificial Coatings on Grade 10.9 Fasteners for Multimetal Armor Applications

DTIC Science & Technology

2013-08-01

hexavalent chromium , immersion, magniplate, trivalent chromium (TCP), bolts nonchromate, hexavalent chrome, grade 10.9 fasteners, bolt-on armor...for Testing and Materials (ASTM) B633 (4) electroplated zinc with hexavalent chromium conversion coating 2. Trivalent Chromium Process (TCP): ASTM...B633 (4) electroplated zinc with trivalent chromium conversion coating 3. AlumiPlate: Process details, entire surface electroplated with aluminum (Al

The use of electrochemical impedance spectroscopy (EIS) to measure the corrosion of metals in contact with wood

Treesearch

Samuel L. Zelinka; Douglas R. Rammer

2005-01-01

Although preservative treatments prolong the life of wood, they can also contribute to the corrosion of fasteners. The corrosion of fasteners merits further study because it can affect the long-term durability of structures and fundamental knowledge of corrosion in wood is limited. The goal of this study is to determine the viability of electrochemical impedance...

From laboratory corrosion tests to a corrosion lifetime for wood fasteners : progress and challenges

Treesearch

Samuel L. Zelinka; Dominique Derome; Samuel V. Glass

2010-01-01

Determining a “corrosion-lifetime” for fasteners embedded in wood treated with recently adopted preservative systems depends upon successfully relating results of laboratory tests to in-service conditions. In contrast to laboratory tests where metal is embedded in wood at constant temperature and moisture content, the in-service temperature and moisture content of wood...

The two NUT-like solutions of Ernst equation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu Yabo; Dong Peng; Deng Xuemei

By applying Ehlers transformation to Schwarzschild and Kerr solutions of Ernst equation and choosing the suitable coordinate transformations, the two NUT-like solutions, i.e., the so called NUT-Taub-like and the Kerr-NUT-like solutions are obtained which not only can, respectively, reduce to Schwarzschild and Kerr solutions when the parameter l{sup '}=0, but also can also reduce to the NUT-Taub metric and Kerr-NUT metric, respectively, when l{sup '} satisfies the some approximation. Meanwhile it is shown that in the NUT-Taub and Kerr-NUT solutions the range of value for the parameter l interpreted as the gravomagnetic monopole cannot be arbitrary and should be confinedmore » by mass of the source to vertical bar l vertical bar<

Perceptions and Knowledge of Nuts amongst Health Professionals in New Zealand

PubMed Central

Brown, Rachel C.; Yong, Lee Ching; Gray, Andrew R.; Tey, Siew Ling; Chisholm, Alexandra; Leong, Sook Ling

2017-01-01

Despite their nutritional value, population-level nut consumption remains low. Studies suggest that individuals would eat more nuts on their doctor’s advice, making health professionals potentially important for promoting nut consumption. This cross-sectional study aimed to examine the perceptions and knowledge of nuts and the predictors of nut promotion among health professionals in New Zealand. Dietitians, general practitioners (GPs), and practice nurses were identified from the Electoral Roll and invited to complete a questionnaire (n = 318, 292, and 149 respondents respectively). Over one-fifth of GPs and practice nurses believed that eating nuts could increase blood cholesterol concentrations and cause weight gain. The most common perceptions overall were that nuts are healthy; high in protein, fat, and calories; and are satiating. Nut consumption was recommended for reasons relating to these perceptions and because of nuts’ selenium content. Conversely, reasons for suggesting the consumption of fewer nuts included that they were high in calories and fat, would cause weight gain, and concerns regarding allergies and cost. All groups of health professionals were more likely to promote nut consumption if they perceived nuts to reduce the risk of diabetes (all p ≤ 0.034). Education could improve health professionals’ knowledge regarding the effects of nut consumption on blood cholesterol and body weight, alongside other health benefits, which should improve the advice given to patients and may thereby increase nut consumption. PMID:28257045

Blind-Anchor-Nut-Installation Fixture (BANIF)

NASA Technical Reports Server (NTRS)

Willey, Norman F., Jr.; Linker, James F.

1994-01-01

Blind-anchor-nut-installation fixture, BANIF, developed for replacing or installing anchor nuts in blind holes or other inaccessible places. Attachment of anchor nut to BANIF enables placement of anchor nut on blind side of component.

Tree nut consumption improves nutrient intake and diet quality in US adults: an analysis of National Health and Nutrition Examination Survey (NHANES) 1999-2004

USDA-ARS?s Scientific Manuscript database

Recent epidemiologic studies assessing tree nut (almonds, Brazil nuts, cashews, hazelnuts, macadamia nuts, pecans, pine nuts, pistachios, and walnuts) consumption and the association with nutrient intake and diet quality are lacking. This study determined the association of tree nut consumption and ...

[Skin graft combined with thorax wire fastening for repairing postoperative coloboma After resection of chest back giant nevus].

PubMed

Zhao, Weimin; Dai, Tao; Yuan, Depin; Zhang, Gongbao

2011-11-01

To observe the effectiveness of skin graft combined with thorax wire fastening for repairing postoperative coloboma after resection of chest back giant nevus. Between June 2007 and October 2010, 17 cases of chest back giant nevus were treated. There were 7 males and 10 females, aged from 3 years and 6 months to 15 years (mean, 8 years). The size of giant nevus was 20 cm x 12 cm to 60 cm x 50 cm. Two cases of them were ever treated by laser, while the others were never treated. The check before operation showed ulcer of the skin and effusion in 2 cases, hard skin in 3 cases, hair growth in 7 cases, and normal in 5 cases. Five cases had serious itch. After giant nevus was cut off, thorax wire was fastened to reduce the wound area, and then the intermediate split thickness skin graft of thigh was used to repair the wound. Comprehensive anti-scar treatment was given postoperatively. The wound size was (2 110.74 +/- 725.69) cm2 after resection of giant nevus, and was (1 624.94 +/- 560.57) cm2 after thorax wire fastening, showing significant difference (t = 9.006, P = 0.001). All the grafting skin survived; the incision and wound at donor site healed by first intention. The patients were followed up 6 months to 2 years (mean, 13 months). No scar proliferation or contracture occurred. The skin color and elasticity were similar to the normal skin; the nipple, navel, and other local apparatus were not shifted after operation. It can reduce donor site of skin and postoperative scar, and achieve satisfactory appearance to cover the wound by skin graft combined with thorax wire fastening after chest back giant nevus was cut off.

Stress analysis method for clearance-fit joints with bearing-bypass loads

NASA Technical Reports Server (NTRS)

Naik, R. A.; Crews, J. H., Jr.

1989-01-01

Within a multi-fastener joint, fastener holes may be subjected to the combined effects of bearing loads and loads that bypass the hole to be reacted elsewhere in the joint. The analysis of a joint subjected to search combined bearing and bypass loads is complicated by the usual clearance between the hole and the fastener. A simple analysis method for such clearance-fit joints subjected to bearing-bypass loading has been developed in the present study. It uses an inverse formulation with a linear elastic finite-element analysis. Conditions along the bolt-hole contact arc are specified by displacement constraint equations. The present method is simple to apply and can be implemented with most general purpose finite-element programs since it does not use complicated iterative-incremental procedures. The method was used to study the effects of bearing-bypass loading on bolt-hole contact angles and local stresses. In this study, a rigid, frictionless bolt was used with a plate having the properties of a quasi-isotropic graphite/epoxy laminate. Results showed that the contact angle as well as the peak stresses around the hole and their locations were strongly influenced by the ratio of bearing and bypass loads. For single contact, tension and compression bearing-bypass loading had opposite effects on the contact angle. For some compressive bearing-bypass loads, the hole tended to close on the fastener leading to dual contact. It was shown that dual contact reduces the stress concentration at the fastener and would, therefore, increase joint strength in compression. The results illustrate the general importance of accounting for bolt-hole clearance and contact to accurately compute local bolt-hole stresses for combined bearings and bypass loading.

Nuts, especially walnuts, have both antioxidant quantity and efficacy and exhibit significant potential health benefits.

PubMed

Vinson, Joe A; Cai, Yuxing

2012-02-01

Free and total (after basic hydrolysis) polyphenols in nine types of raw and roasted nuts and two types of peanut butter (54 commercial samples) were analyzed after methanol extraction by a single step Folin-Ciocalteu reagent using catechin as standard. Walnuts had the highest free and total polyphenols in both the combined raw and roasted samples. Total polyphenols in the nuts were significantly higher than free polyphenols. Roasting had little effect on either free or total polyphenols in nuts. Raw and roasted walnuts had the highest total polyphenols. The efficacy of raw and roasted nut antioxidants was assessed by measuring the ability of the free polyphenol nut extracts to inhibit the oxidation of lower density lipoproteins (LDL + VLDL). A nut polyphenol, catechin, was measured after binding of three nut extracts to lower density lipoproteins. Walnut polyphenols had the best efficacy among the nuts and also the highest lipoprotein-bound antioxidant activity. Based on USDA availability data, the per capita total polyphenols was 162 mg from nuts per day in 2008. This corresponds to 19% of the total polyphenols from fruits and vegetables, nuts, grains, oils and spices in the US diet. Nuts provided 158 mg of polyphenols per day to the European Union diet. Nuts are high in polyphenol antioxidants which by binding to lipoproteins would inhibit oxidative processes that lead to atherosclerosis in vivo. In human supplementation studies nuts have been shown to improve the lipid profile, increase endothelial function and reduce inflammation, all without causing weight gain. These qualities make nuts a nutritious healthy snack and food additive.

Taking actions to quit chewing betel nuts and starting a new life: taxi drivers' successful experiences of quitting betel nut chewing.

PubMed

Yang, Tsui-Yun; Lin, Hung-Ru

2017-04-01

To understand taxi drivers' successful experiences of quitting betel nut chewing. Previous studies verified that betel nut chewing significantly increases the risk of oral cancer. In Taiwan, taxi drivers work for approximately 10-13 hours per day, and 31·7-80% of them choose to chew betel nuts for their invigorating qualities, which enable them to work more hours and receive more income. A qualitative research design was used. This study used the grounded theory method with purposive sampling to perform in-depth interviews with male taxi drivers who had successfully quit betel nut chewing for more than six months. The interviewed participants were 25 taxi drivers aged 45-67 who had chewed betel nuts for an average of 30·9 years. A constant comparative analysis of the 25 interviews revealed six categories, namely the first experience of chewing betel nuts, a part of work and life, perceiving the impact of betel nuts, trying to change, acting to quit betel nut chewing and starting a new life. During the cessation process, taxi drivers tended to be affected by their addiction to chewing betel nuts and the temptation of friends' invitations to chew betel nuts. However, their recognition of the physical effects of betel nut chewing and their sense of responsibility and commitment to family were the critical factors affecting their determination to quit betel nut chewing. Their willpower to not to chew betel nuts and the source of their motivation to exercise self-control also contributed to their success. Healthcare personnel should understand the experiences and perceptions of betel nut chewers, strengthen their understanding of the effects of betel nut chewing on physical health during the cessation period and support their self-efficacy and quitting behaviours with the assistance of significant others. © 2016 John Wiley & Sons Ltd.

Thermal Preload Relaxation of Bolted CFRP Structures for Flexible Life Time Design Methodology

NASA Astrophysics Data System (ADS)

Hubbertz, Hendrik; Friedrich, Christoph

2014-06-01

Taking into account the assembly, maintenance and repair of component systems, it becomes clear that mechanical fastening is necessary also for CFRP structures besides adhesive bonding. Threaded fasteners usually prestress CFRP materials perpendicular to the fibres. In this direction the high strength-increase by the carbon fibres is subordinated and the material properties are dominated by the relatively low strength plastic matrix. The following chapters explain the basics of preload loss at threaded fasteners and show the results of experiments with different influences on preload relaxation with CFRP materials. As the presented studies were carried out under the influence of temperature, thermal load plastification will be regarded as priority. The structural changes in the material are also documented with microscope images as well as an outlook for further research is given.

LDEF mechanical systems

NASA Technical Reports Server (NTRS)

Spear, W. Steve; Dursch, Harry W.

1992-01-01

Following LDEF retrieval, a number of studies were made of mechanical hardware and structure flown on the LDEF. The primary objectives are to determine the effects of long term space exposure on (1) mechanisms either used on LDEF or as part of individual experiments; (2) LDEF structural components; and (3) fasteners. Results from examination and testing of LDEF structure, fasteners, LDEF end support beam, environment exposure control canisters, experiment tray clamps, LDEF grapple fixtures, and viscous damper are presented. The most significant finding is the absence of space exposure related cold welding. The instances of seizure or removal difficulties initially attributed to cold welding were shown to have resulted from installation galling damage or improper removal techniques. Widespread difficulties encountered with removal of stainless steel fasteners underscore the need for effective thread lubrication schemes to ensure successful application of proposed orbital replacement units onboard Space Station Freedom.

Shear joint capability versus bolt clearance

NASA Technical Reports Server (NTRS)

Lee, H. M.

1992-01-01

The results of a conservative analysis approach into the determination of shear joint strength capability for typical space-flight hardware as a function of the bolt-hole clearance specified in the design are presented. These joints are comprised of high-strength steel fasteners and abutments constructed of aluminum alloys familiar to the aerospace industry. A general analytical expression was first arrived at which relates bolt-hole clearance to the bolt shear load required to place all joint fasteners into a shear transferring position. Extension of this work allowed the analytical development of joint load capability as a function of the number of fasteners, shear strength of the bolt, bolt-hole clearance, and the desired factor of safety. Analysis results clearly indicate that a typical space-flight hardware joint can withstand significant loading when less than ideal bolt hole clearances are used in the design.

Method and apparatus for spraying molten materials

DOEpatents

Glovan, R.J.; Tierney, J.C.; McLean, L.L.; Johnson, L.L.; Nelson, G.L.; Lee, Y.M.

1996-06-25

A metal spray apparatus is provided with a supersonic nozzle. Molten metal is injected into a gas stream flowing through the nozzle under pressure. By varying the pressure of the injected metal, the droplet can be made in various selected sizes with each selected size having a high degree of size uniformity. A unique one piece graphite heater provides easily controlled uniformity of temperature in the nozzle and an attached tundish which holds the pressurized molten metal. A unique U-shaped gas heater provides extremely hot inlet gas temperatures to the nozzle. A particularly useful application of the spray apparatus is coating of threads of a fastener with a shape memory alloy. This permits a fastener to be easily inserted and removed but provides for a secure locking of the fastener in high temperature environments. 12 figs.

Job Language Performance Requirements for MOS 13B, Cannon Crewman. Volume I & II.

DTIC Science & Technology

1982-10-01

COMPOUND :. Two or more sentences joined by: -1. Coordinating conjunction Explain the task and ask the trainees if they understand the task, end the...protective equipment belt loops boots closures )utton boot socks gas flap button )uttornhole fastened impregnated socks -lothing fastener knitted cuffs...liner t~seiuble it over performing. .. .duties protective ovtrboots )loves primary duties protective socks hours protective clothing shirt liner .nside

Dynamic Data Driven Methods for Self-aware Aerospace Vehicles

DTIC Science & Technology

2015-04-08

structural response model that incorporates multiple degradation or failure modes including damaged panel strength (BVID, thru- hole ), damaged panel...stiffness (BVID, thru- hole ), loose fastener, fretted fastener hole , and disbonded surface. • A new data-driven approach for the online updating of the flight...between the first and second plies. The panels were reinforced around the boarders of the panel with through holes to simulate mounting the wing skins to

Constructing Cost-Effective Crystal Structures with Table Tennis Balls and Tape That Allows Students to Assemble and Model Multiple Unit Cells

ERIC Educational Resources Information Center

Elsworth, Catherine; Li, Barbara T. Y.; Ten, Abilio

2017-01-01

In this letter we present an innovative and cost-effective method of constructing crystal structures using Dual Lock fastening adhesive tape with table tennis (ping pong) balls. The use of these fasteners allows the balls to be easily assembled into layers to model various crystal structures and unit cells and then completely disassembled again.…

Pilot Scott Horowitz fashions cord loop fasteners for a contingency spacewalk

NASA Image and Video Library

1997-02-16

S82-E-5597 (17 Feb. 1997) --- Astronaut Scott J. Horowitz at pilot's station works with a hand-fashioned loop fastener device to be used in support of the additional STS-82 Extravehicular Activity (EVA) to service Hubble Space Telescope (HST). Note sketches overhead which were sent by ground controllers to guide the pilot's engineering of the task. This view was taken with an Electronic Still Camera (ESC).

An Integrated Approach to Assess Exposure and Health-Risk from Polycyclic Aromatic Hydrocarbons (PAHs) in a Fastener Manufacturing Industry

PubMed Central

Hsu, Hsin-I; Lin, Ming-Yeng; Chen, Yu-Cheng; Chen, Wang-Yi; Yoon, Chungsik; Chen, Mei-Ru; Tsai, Perng-Jy

2014-01-01

An integrated approach was developed to assess exposure and health-risk from polycyclic aromatic hydrocarbons (PAHs) contained in oil mists in a fastener manufacturing industry. One previously developed model and one new model were adopted for predicting oil mist exposure concentrations emitted from metal work fluid (MWF) and PAHs contained in MWF by using the fastener production rate (Pr) and cumulative fastener production rate (CPr) as predictors, respectively. By applying the annual Pr and CPr records to the above two models, long-term workplace PAH exposure concentrations were predicted. In addition, true exposure data was also collected from the field. The predicted and measured concentrations respectively served as the prior and likelihood distributions in the Bayesian decision analysis (BDA), and the resultant posterior distributions were used to determine the long-term exposure and health-risks posed on workers. Results show that long term exposures to PAHs would result in a 3.1%, 96.7%, and 73.4% chance of exceeding the PEL-TWA (0.2 mg/m3), action level (0.1 mg/m3), and acceptable health risk (10−3), respectively. In conclusion, preventive measures should be taken immediately to reduce workers’ PAH exposures. PMID:25226413

Decision Support Functions for the Retail Operations Management System.

DTIC Science & Technology

1984-09-01

0003 NUTS , PLANTERS PEANUTS CN 1 .10 Al 053200-0006 NUTS , PLANTERS MIXED CN 1.05 Al 053200-001 1 NUTS , PLANTERS CASHEWS CN 2.55 Al 053200-0052 NUTS ...PLANTERS SPANISH PEA CN 1.10 Al 053200-4877 NUTS , SMOKE HOUSE ALMONDS EA .25 A2 101120-0002 CIO, CAMEL REG PK .40 A2 101120-0004 CIO, VANTAGE REG PK .40...CANDY, TOOTSIE POP DROP EA .1450 112 033200-0006 NUTS , PLANTERS MIXED CN 1.0910 72 053200-4877 NUTS , SMOKE HOUSE ALMONDS EA .1456 44 101120-0003 CIG

Nuts and Human Health Outcomes: A Systematic Review

PubMed Central

de Souza, Rávila Graziany Machado; Schincaglia, Raquel Machado; Pimentel, Gustavo Duarte

2017-01-01

There has been increasing interest in nuts and their outcome regarding human health. The consumption of nuts is frequently associated with reduction in risk factors for chronic diseases. Although nuts are high calorie foods, several studies have reported beneficial effects after nut consumption, due to fatty acid profiles, vegetable proteins, fibers, vitamins, minerals, carotenoids, and phytosterols with potential antioxidant action. However, the current findings about the benefits of nut consumption on human health have not yet been clearly discussed. This review highlights the effects of nut consumption on the context of human health. PMID:29207471

Internally Wrenching Nut

NASA Technical Reports Server (NTRS)

Cortes, R. G.

1986-01-01

Less space needed for installation and removal. Nut for use with short bolts torqued with allen wrench. In contrast with standard hexagonal nuts, new nut requires no external wrench clearance on installation surface. Nut has many uses in assemblies where space is limited, especially in automotive and aircraft industries.

Production and analysis of recombinant tree nut allergens.

PubMed

Willison, Leanna N; Sathe, Shridhar K; Roux, Kenneth H

2014-03-01

Allergic reactions to tree nuts are a growing global concern as the number of affected individuals continues to rise. Unlike some food allergies, tree nuts can cause severe reactions that persist throughout life. The tree nuts discussed in this review include those most commonly responsible for allergic reactions: cashew, almond, hazelnut, walnut, pecan, Brazil nut, pistachio, and chestnut. The native allergenic proteins derived from tree nuts are frequently difficult to isolate and purify and may not be adequately represented in aqueous nut protein extracts. Consequently, defined recombinant allergens have become useful reagents in a variety of immunoassays aimed at the diagnosis of tree nut allergy, assessing cross-reactivity between various nuts and other seeds, mapping of IgE binding epitopes, and analyzing the effects of the food matrix, food processing, and gastric digestion on allergenicity. This review describes the approaches that can be used for the production of recombinant tree nut allergens and addresses key issues associated with their production and downstream applications. Copyright © 2013 Elsevier Inc. All rights reserved.

Systematic review on cashew nut allergy.

PubMed

van der Valk, J P M; Dubois, A E J; Gerth van Wijk, R; Wichers, H J; de Jong, N W

2014-06-01

Recent studies on cashew nut allergy suggest that the prevalence of cashew nut allergy is increasing. Cashew nut consumption by allergic patients can cause severe reactions, including anaphylaxis. This review summarizes current knowledge on cashew nut allergy to facilitate timely clinical recognition and to promote awareness of this emerging food allergy amongst clinicians. The goal of this study is to present a systematic review focused on the clinical aspects of allergy to cashew nut including the characteristics of cashew nut, the prevalence, allergenic components, cross-reactivity, diagnosis and management of cashew nut allergy. The literature search yielded 255 articles of which 40 met our selection criteria and were considered to be relevant for this review. The 40 articles included one prospective study, six retrospective studies and seven case reports. The remaining 26 papers were not directly related to cashew nut allergy. The literature suggests that the prevalence of cashew nut allergy is increasing, although the level of evidence for this is low. A minimal amount of cashew nut allergen may cause a severe allergic reaction, suggesting high potency comparable with other tree nuts and peanuts. Cashew allergy is clearly an underestimated important healthcare problem, especially in children. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Factors affecting cashew processing by wild bearded capuchin monkeys (Sapajus libidinosus, Kerr 1792).

PubMed

Visalberghi, Elisabetta; Albani, Alessandro; Ventricelli, Marialba; Izar, Patricia; Schino, Gabriele; Fragazsy, Dorothy

2016-08-01

Cashew nuts are very nutritious but so well defended by caustic chemicals that very few species eat them. We investigated how wild bearded capuchin monkeys (Sapajus libidinosus) living at Fazenda Boa Vista (FBV; Piauí, Brazil) process cashew nuts (Anacardium spp.) to avoid the caustic chemicals contained in the seed mesocarp. We recorded the behavior of 23 individuals toward fresh (N = 1282) and dry (N = 477) cashew nuts. Adult capuchins used different sets of behaviors to process nuts: rubbing for fresh nuts and tool use for dry nuts. Moreover, adults succeed to open dry nuts both by using teeth and tools. Age and body mass significantly affected success. Signs of discomfort (e.g., chemical burns, drooling) were rare. Young capuchins do not frequently closely observe adults processing cashew nuts, nor eat bits of nut processed by others. Thus, observing the behavior of skillful group members does not seem important for learning how to process cashew nuts, although being together with group members eating cashews is likely to facilitate interest toward nuts and their inclusion into the diet. These findings differ from those obtained when capuchins crack palm nuts, where observations of others cracking nuts and encounters with the artifacts of cracking produced by others are common and support young individuals' persistent practice at cracking. Cashew nut processing by capuchins in FBV appears to differ from that observed in a conspecific population living 320 km apart, where capuchins use tools to open both fresh and dry nuts. Moreover, in the latter population, chemical burns due to cashew caustic compounds appear to be common. The sources of these differences across populations deserve investigation, especially given that social influences on young monkeys learning to open cashew nuts at FBV seem to be nonspecific. Am. J. Primatol. 78:799-815, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

21 CFR 164.110 - Mixed nuts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products... shelled tree nut ingredients, with or without one or more of the optional shelled peanut ingredients, of... is packed in transparent containers, three or more of the optional tree nut ingredients shall be...

High-Temperature Captive Nut Assembly

NASA Technical Reports Server (NTRS)

Marke, M. L.; Charles, J. F.

1982-01-01

High-temperature captive-nut assembly consists of removable nut element that snaps into loose-fitting recesses in shell. Replacement of nut element is easily accomplished with simple handtools. Old nut is pried out and new one pushed into position. Removal is easily accomplished with help of U-shaped tool.

21 CFR 164.110 - Mixed nuts.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to in paragraph (a) of this section are: (1) Almonds, black walnuts, Brazil nuts, cashews, English... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Mixed nuts. 164.110 Section 164.110 Food and Drugs... CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products...

21 CFR 164.110 - Mixed nuts.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to in paragraph (a) of this section are: (1) Almonds, black walnuts, Brazil nuts, cashews, English... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Mixed nuts. 164.110 Section 164.110 Food and Drugs... CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products...

21 CFR 164.110 - Mixed nuts.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to in paragraph (a) of this section are: (1) Almonds, black walnuts, Brazil nuts, cashews, English... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Mixed nuts. 164.110 Section 164.110 Food and Drugs... CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products...

21 CFR 164.110 - Mixed nuts.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to in paragraph (a) of this section are: (1) Almonds, black walnuts, Brazil nuts, cashews, English... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Mixed nuts. 164.110 Section 164.110 Food and Drugs... CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products...

Oecophylla longinoda (Hymenoptera: Formicidae) Lead to Increased Cashew Kernel Size and Kernel Quality.

PubMed

Anato, F M; Sinzogan, A A C; Offenberg, J; Adandonon, A; Wargui, R B; Deguenon, J M; Ayelo, P M; Vayssières, J-F; Kossou, D K

2017-06-01

Weaver ants, Oecophylla spp., are known to positively affect cashew, Anacardium occidentale L., raw nut yield, but their effects on the kernels have not been reported. We compared nut size and the proportion of marketable kernels between raw nuts collected from trees with and without ants. Raw nuts collected from trees with weaver ants were 2.9% larger than nuts from control trees (i.e., without weaver ants), leading to 14% higher proportion of marketable kernels. On trees with ants, the kernel: raw nut ratio from nuts damaged by formic acid was 4.8% lower compared with nondamaged nuts from the same trees. Weaver ants provided three benefits to cashew production by increasing yields, yielding larger nuts, and by producing greater proportions of marketable kernel mass. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Mediterranean nuts: origins, ancient medicinal benefits and symbolism.

PubMed

Casas-Agustench, Patricia; Salas-Huetos, Albert; Salas-Salvadó, Jordi

2011-12-01

To consider historical aspects of nuts in relation to origin and distribution, attributed medicinal benefits, symbolism, legends and superstitions. Review of historical aspects of nuts. Mediterranean region. The varieties reviewed include almonds, walnuts, hazelnuts, pine nuts and pistachios. Like other foods, nuts have a wide variety of cultural connections to the areas where they grow and to the people who live there or eat them. History, symbolism and legends reveal the ancient tradition of nuts and how they are related to the lives of our ancestors. Archaeological excavations in eastern Turkey have uncovered the existence of a non-migratory society whose economy centred on harvesting nuts. This shows that nuts have been a staple in the human diet since the beginnings of history. Moreover, since ancient times nuts have been used for their medicinal properties. They also play a role in many old legends and traditions.

Health Benefits of Nut Consumption

PubMed Central

Ros, Emilio

2010-01-01

Nuts (tree nuts and peanuts) are nutrient dense foods with complex matrices rich in unsaturated fatty and other bioactive compounds: high-quality vegetable protein, fiber, minerals, tocopherols, phytosterols, and phenolic compounds. By virtue of their unique composition, nuts are likely to beneficially impact health outcomes. Epidemiologic studies have associated nut consumption with a reduced incidence of coronary heart disease and gallstones in both genders and diabetes in women. Limited evidence also suggests beneficial effects on hypertension, cancer, and inflammation. Interventional studies consistently show that nut intake has a cholesterol-lowering effect, even in the context of healthy diets, and there is emerging evidence of beneficial effects on oxidative stress, inflammation, and vascular reactivity. Blood pressure, visceral adiposity and the metabolic syndrome also appear to be positively influenced by nut consumption. Thus it is clear that nuts have a beneficial impact on many cardiovascular risk factors. Contrary to expectations, epidemiologic studies and clinical trials suggest that regular nut consumption is unlikely to contribute to obesity and may even help in weight loss. Safety concerns are limited to the infrequent occurrence of nut allergy in children. In conclusion, nuts are nutrient rich foods with wide-ranging cardiovascular and metabolic benefits, which can be readily incorporated into healthy diets. PMID:22254047

Uncertainties in corrosion rate measurements of fasteners exposed to treated wood at 100% relative humidity

Treesearch

Samuel L. Zelinka

2007-01-01

This paper evaluates the effect that uncertainties in measurements of time, weight, and surface area have on the determination of the corrosion rate of metal fasteners in contact with wood. Three different types of nails were driven into alkaline copper quaternary (ACQ)-treated wood and exposed to 26.7°C (80°C) at 100 % relative humidity environment for up to 1 year....

Seals, Concrete Anchors, and Connections

DTIC Science & Technology

1989-02-01

brick. Medium to heavy I.. loads cannot be safely fastened to soft masonry materials (stuc-. : - . co. grout. plaster or plasterboard ) since such...588C, Type 1. Class A. Style 1 Use in: All masonry material Use in: Block, wallboard , plaster , hollow tile Use with: Sheet metal, wood or lag screws... Wallboard . plaster , paneling Use in: Wallboard or solid masonry Use with: No (- oer fastener needed Use with: Sheet metal screw Made of: Ste( Made of

Cadmium Replacements for High Strength Steel Fasteners

DTIC Science & Technology

2005-03-01

w/o corr expos – strippability (MIL-S-5002D) [fstnr & pnl] • bend test after coating reapplication • stress durability (ISO 15330) @ 96 hr before...Immersion Paint Adhesion -----45 washersGalvanic Bi-Metallic Corrosion Strippability Stress Durability Fatigue COF Torque Tension Breakaway Torque Paint...Patrick Doyle (NAWCADLKE) • Selected Issues – Zn vs Cad as control – Grade 8 (150 ksi) vs 180 ksi or 220 ksi fasteners – Use of dry film lubricants

Test results of smart aircraft fastener for KC-135 structural integrity

NASA Astrophysics Data System (ADS)

Schoess, Jeffrey N.; Seifert, Greg

1998-07-01

Hidden and inaccessible corrosion in aircraft structures is the number one logistics problem for the US Air Force, with an estimated maintenance cost in excess of $LR 1.0B per year in 1990-equivalent dollars. The Smart Aircraft Fastener Evaluation (SAFE) system was developed to provide early warning detection of corrosion-related symptoms in hidden locations of aircraft structures. The SAFE system incorporates an in situ measurement approach that measures and autonomously records several environmental conditions within a Hi-Lok aircraft fastener that could cause corrosion. The SAFE system integrates a miniature electrochemical microsensor array and a time-of-wetness sensor with an ultra low power 8-bit microcontroller and 4- Mbyte solid-state FLASH archival memory to measure evidence of active corrosion. A summary of the technical approach and a detailed analysis of the KC-135 lap joint test coupon results are presented.

Smart fastener for KC-135 structural integrity monitoring

NASA Astrophysics Data System (ADS)

Schoess, Jeffrey N.; Seifert, Greg

1997-06-01

Hidden and inaccessible corrosion in aircraft structures is the number-one logistics problem for the U.S. Air Force, with an estimated maintenance cost in excess of $DOL1.0 billion per year in 1990-equivalent dollars. The Smart Aircraft Fastener Evaluation (SAFE) system is being developed to provide early warning detection of corrosion- related symptoms in hidden locations of aircraft structures. The SAFE incorporates an in situ measurement approach that measures and autonomously records several environmental conditions (i.e., pH, temperature, chloride, free potential, time-of-wetness) within a Hi-Lok aircraft fastener that could cause corrosion to occur. The SAFE system integrates a miniature electrochemical microsensor array and a time-of- wetness sensor with an ultra-low-power 8-bit microcontroller and 5-Mbyte solid-state FLASH archival memory to measure the evidence of active corrosion. A summary of the technical approach, system design definition, software architecture, and future field test plans will be presented.

Photovoltaic module kit including connector assembly for non-penetrating array installation

DOEpatents

Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

2013-12-31

A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assempbled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting regions of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized slidably receive the male fastener, with all of the connector heads being identical.

Photovoltaic module kit including connector assembly for non-penetrating array installation

DOEpatents

Botkin, Jonathan [El Cerrito, CA; Graves, Simon [Berkeley, CA; Danning, Matt [Oakland, CA; Culligan, Matthew [Berkeley, CA

2011-11-22

A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

Photovoltaic module kit including connector assembly for non-penetrating array installation

DOEpatents

Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

2012-10-23

A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

Automatic Fastening Large Structures: a New Approach

NASA Technical Reports Server (NTRS)

Lumley, D. F.

1985-01-01

The external tank (ET) intertank structure for the space shuttle, a 27.5 ft diameter 22.5 ft long externally stiffened mechanically fastened skin-stringer-frame structure, was a labor intensitive manual structure built on a modified Saturn tooling position. A new approach was developed based on half-section subassemblies. The heart of this manufacturing approach will be 33 ft high vertical automatic riveting system with a 28 ft rotary positioner coming on-line in mid 1985. The Automatic Riveting System incorporates many of the latest automatic riveting technologies. Key features include: vertical columns with two sets of independently operating CNC drill-riveting heads; capability of drill, insert and upset any one piece fastener up to 3/8 inch diameter including slugs without displacing the workpiece offset bucking ram with programmable rotation and deep retraction; vision system for automatic parts program re-synchronization and part edge margin control; and an automatic rivet selection/handling system.

Metal spray apparatus with a U-shaped electric inlet gas heater and a one-piece electric heater surrounding a nozzle

DOEpatents

Glovan, Ronald J.; Tierney, John C.; McLean, Leroy L.; Johnson, Lawrence L.; Verbael, David J.

1995-01-01

An electrically heated metal spray apparatus is provided with a supersonic nozzle. Molten metal is injected into a gas stream flowing through the nozzle under pressure. By varying the pressure of the injected metal, the droplet can be made in various selected sizes with each selected size having a high degree of size uniformity. A unique one piece graphite heater provides easily controlled uniformity of temperature in the nozzle and an attached tundish which holds the pressurized molten metal. A unique U-shaped gas heater provides extremely hot inlet gas temperatures to the nozzle. A particularly useful application of the spray apparatus is coating of threads of a fastener with a shape memory alloy. This permits a fastener to be easily inserted and removed but provides for a secure locking of the fastener in high temperature environments.

Installation Torque Tables for Noncritical Applications

NASA Technical Reports Server (NTRS)

Rivera-Rosario, Hazel T.; Powell, Joseph S.

2017-01-01

The objective of this project is to define torque values for bolts and screws when loading is not a concern. Fasteners require a certain torque to fulfill its function and prevent failure. NASA Glenn Research Center did not have a set of fastener torque tables for non-critical applications without loads, usually referring to hand-tight or wrench-tight torqueing. The project is based on two formulas, torque and pullout load. Torque values are calculated giving way to preliminary data tables. Testing is done to various bolts and metal plates, torqueing them until the point of failure. Around 640 torque tables were developed for UNC, UNF, and M fasteners. Different lengths of thread engagement were analyzed for the 5 most common materials used at GRC. The tables were put together in an Excel spreadsheet and then formatted into a Word document. The plan is to later convert this to an official technical publication or memorandum.

Performance Characterization of Loctite (Registered Trademark) 242 and 271 Liquid Locking Compounds (LLCs) as a Secondary Locking Feature for International Space Station (ISS) Fasteners

NASA Technical Reports Server (NTRS)

Dube, Michael J.; Gamwell, Wayne R.

2011-01-01

Several International Space Station (ISS) hardware components use Loctite (and other polymer based liquid locking compounds (LLCs)) as a means of meeting the secondary (redundant) locking feature requirement for fasteners. The primary locking method is the fastener preload, with the application of the Loctite compound which when cured is intended to resist preload reduction. The reliability of these compounds has been questioned due to a number of failures during ground testing. The ISS Program Manager requested the NASA Engineering and Safety Center (NESC) to characterize and quantify sensitivities of Loctite being used as a secondary locking feature. The findings and recommendations provided in this investigation apply to the anaerobic LLCs Loctite 242 and 271. No other anaerobic LLCs were evaluated for this investigation. This document contains the findings and recommendations of the NESC investigation

Analysis of cold worked holes for structural life extension

NASA Technical Reports Server (NTRS)

Wieland, David H.; Cutshall, Jon T.; Burnside, O. Hal; Cardinal, Joseph W.

1994-01-01

Cold working holes for improved fatigue life of fastener holes are widely used on aircraft. This paper presents methods used by the authors to determine the percent of cold working to be applied and to analyze fatigue crack growth of cold worked fastener holes. An elastic, perfectly-plastic analysis of a thick-walled tube is used to determine the stress field during the cold working process and the residual stress field after the process is completed. The results of the elastic/plastic analysis are used to determine the amount of cold working to apply to a hole. The residual stress field is then used to perform damage tolerance analysis of a crack growing out of a cold worked fastener hole. This analysis method is easily implemented in existing crack growth computer codes so that the cold worked holes can be used to extend the structural life of aircraft. Analytical results are compared to test data where appropriate.

Recent Developments in Ground-Borne Noise and Vibration Control

NASA Astrophysics Data System (ADS)

Nelson, J. T.

1996-05-01

Vibration control provisions available to the transit designer include (among others) precision straightened rail, ballast mats, floating slabs and very soft direct fixation fasteners, in addition to rail grinding, wheel truing, and continuous welded rail. Recently, the Los Angeles Metro has developed specifications for a soft resilient direct fixation fastener to fit the same base dimensions as the standard direct fixation fastener. In San Francisco, low resonance frequency (8 Hz) floating slabs have been constructed to mitigate predicted ground vibration impacts at nearby residential structures. In Atlanta, low resonance frequency loading slabs have been constructed to maintain a low vibration environment in a medical building planned to be built over the subway structure. In Portland and Pasadena, ballast mats have been recommended to control light rail transit ground vibration impacts on housing located at typically 35 feet from the alignment. Each of these provisions are briefly described in view of recent applications at U.S. transit systems.

Metal spray apparatus with a U-shaped electric inlet gas heater and a one-piece electric heater surrounding a nozzle

DOEpatents

Glovan, R.J.; Tierney, J.C.; McLean, L.L.; Johnson, L.L.; Verbael, D.J.

1995-10-17

An electrically heated metal spray apparatus is provided with a supersonic nozzle. Molten metal is injected into a gas stream flowing through the nozzle under pressure. By varying the pressure of the injected metal, the droplet can be made in various selected sizes with each selected size having a high degree of size uniformity. A unique one piece graphite heater provides easily controlled uniformity of temperature in the nozzle and an attached tundish which holds the pressurized molten metal. A unique U-shaped gas heater provides extremely hot inlet gas temperatures to the nozzle. A particularly useful application of the spray apparatus is coating of threads of a fastener with a shape memory alloy. This permits a fastener to be easily inserted and removed but provides for a secure locking of the fastener in high temperature environments. 12 figs.

The ability of adults and children to visually identify peanuts and tree nuts.

PubMed

Hostetler, Todd L; Hostetler, Sarah G; Phillips, Gary; Martin, Bryan L

2012-01-01

Peanuts and tree nuts are common food allergens and are the leading cause of fatalities from food-induced anaphylaxis. Dietary avoidance is the primary management of these allergies and requires the ability to identify peanuts or tree nuts. To investigate the ability of adults and children to visually identify peanuts and tree nuts. A nut display was assembled that held peanuts and 9 tree nuts in a total of 19 different forms. Persons 6 years or older completed a worksheet to name the items. One-thousand one-hundred five subjects completed the study. The mean number of peanuts and tree nuts identified by all subjects was 8.4 (44.2%) out of a possible 19. The mean for children ages 6 to 18 was 4.6 (24.2%), compared with 11.1 (58.4%) for adults older than 18 (P < .001). The most commonly identified items were peanut in the shell and without the shell. The least identified was hazelnut (filbert) in the shell and without the shell. No difference was seen in the performance of peanut- or tree nut-allergic subjects compared with nonallergic subjects. Fifty percent of subjects with a peanut or tree nut allergy correctly identified all forms of peanuts or tree nuts to which they are allergic. Parents of peanut- or tree nut-allergic children did no better than parents of children without such allergy. Overall, both children and adults are unreliable at visually identifying most nuts. Treatment of nut allergies with dietary avoidance should include education for both adults and children on identification of peanuts and tree nuts. Copyright © 2012 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

[Epidemiological investigation of chewing fresh or dried betel nut and oral mucosal disease].

PubMed

Yongxiu, Du; Dongye, Sun; Xinchun, Jian; Qiuhua, Mao; Yanan, Cheng; Pu, Xu

2016-08-01

This study was conducted to investigate the effect of chewing fresh or dried betel nut on the inci-dence and canceration of oral mucosa disease in Haikou City in Hainan Province. Through a survey questionnaire, clinical examination, and regular follow-up, we collected clinical data from 1 722 cases and divided them into two groups, among which 704 of the afflicted people chew dried betel nut, whereas the other 1 018 chew fresh betel nut. The data were 
statistically analyzed using different variables which included age, number, time of onset of the disease, and the cancerous condition associated with common oral mucosa disease, including oral submucous fibrosis (OSF), oral leukoplakia (OLK), and oral Lichen planus (OLP). 1) The study found no significant difference in the prevalence of oral mucosa diseases between the dried betel nut group (n=704) and fresh betel nut group (n=1 018) among the 1 722 cases (P>0.05), but the peak age of oral mucosal disease was more advanced in the dried betel nut group (P<0.01). 2) The incidence within 5 years of OSF, OLK, OLP, and oral mucosa diseases in the dried betel nut group was significantly higher than that in the fresh betel nut group (P<0.01). 3) The incidence of cancer for oral mucosa disease in patients included in the dried betel nut group was significantly higher than that in the fresh betel nut group (P<0.01). Chewing dried betel nut is more pathogenic and carcinogenic than chewing fresh betel nut. The extremely harmful components of the dried betel nut synergistically play a vital role in the occurrence and carcinogenesis of oral mucosal diseases.

Role of an RNase III Binding Site in Transcription Termination at λ nutL by HK022 Nun Protein

PubMed Central

Washburn, Robert S.; Court, Donald L.; Gottesman, Max E.

2006-01-01

The phage HK022 Nun protein excludes phage λ by binding nascent λ pL and pR transcripts at nutL and nutR, respectively, and inducing transcription termination just downstream of these sites. Termination is more efficient at nutL than at nutR. One difference between nutL and nutR is the presence of RNase III processing sites (rIII) located immediately promoter distal to λ nutL. We found that deletion of rIII dramatically reduced Nun transcription arrest in vitro but had little effect on termination in vivo. However, consistent with the in vitro results, overexpression of a transcript carrying nutL and rIII efficiently titrated Nun, allowing λ to grow on a strain that expressed Nun, whereas a transcript carrying only nutL or nutL-rIII with nucleotides 97 to 141 deleted was ineffective. Rnc70, an RNase III mutant that binds but does not cleave rIII, also prevented Nun-mediated λ exclusion. We propose that rIII enhances the on-rate of Nun at nutL, stimulating Nun-mediated arrest in vitro. We have shown that a specific element in rIII, i.e., box C (G89GUGUGUG), strongly enhances arrest on rIII+ templates. Nun-rIII interactions do not stimulate Nun termination in vivo, presumably because formation of the Nun-nutL complex is normally not rate-limiting in the cell. In contrast to Nun, N is not occluded by Rnc70 and is not efficiently titrated by a nutL-rIII transcript. PMID:16980485

Machine recognition of navel orange worm damage in x-ray images of pistachio nuts

NASA Astrophysics Data System (ADS)

Keagy, Pamela M.; Parvin, Bahram; Schatzki, Thomas F.

1995-01-01

Insect infestation increases the probability of aflatoxin contamination in pistachio nuts. A non- destructive test is currently not available to determine the insect content of pistachio nuts. This paper uses film X-ray images of various types of pistachio nuts to assess the possibility of machine recognition of insect infested nuts. Histogram parameters of four derived images are used in discriminant functions to select insect infested nuts from specific processing streams.

Effect of tiger nut-derived products in gluten-free batter and bread.

PubMed

Aguilar, Núria; Albanell, Elena; Miñarro, Begoña; Guamis, Buenaventura; Capellas, Marta

2015-07-01

Tiger nut is a tuber used to produce tiger nut milk that yields a high quantity of solid waste, which can be dried and used as fiber source. The objective of this paper was to evaluate the quality of gluten-free bread formulated with different tiger nut-derived products in order to substitute soya flour (which is an allergen ingredient) and, at the same time, increase the use of tiger nut-derived products. Four gluten-free formulations based on corn starch and containing tiger nut milk, tiger nut milk by-product, tiger nut flour, or soya flour (as reference formulation) were studied. Tiger nut milk increased G' of gluten-free batter and rendered breads with the softest crumb (502.46 g ± 102.05), the highest loaf-specific volume (3.35 cm(3)/g ± 0.25), and it was mostly preferred by consumers (61.02%). Breads elaborated with tiger nut flour had similar characteristics than soya flour breads (except in color and crumb structure). The addition of tiger nut milk by-product resulted in a hard (1047.64 g ± 145.74) and dark (L(*)  = 70.02 ± 3.38) crumb bread, which was the least preferred by consumers. Results showed that tiger nut is a promising ingredient to formulate gluten-free baked products. © The Author(s) 2014.

Determination of Trace Elements in Edible Nuts in the Beijing Market by ICP-M.

PubMed

Yin, Liang Liang; Tian, Qing; Shao, Xian Zhang; Kong, Xiang Yin; Ji, Yan Qin

2015-06-01

Nuts have received increased attention from the public in recent years as important sources of some essential elements, and information on the levels of elements in edible nuts is useful to consumers. Determination of the elemental distributions in nuts is not only necessary in evaluating the total dietary intake of the essential elements, but also useful in detecting heavy metal contamination in food. The aim of this study was to determine the mineral contents in edible nuts, and to assess the food safety of nuts in the Beijing market. Levels of Li, Cr, Mn, Co, Cu, Zn, As, Se, Rb, Sr, Mo, Cd, Cs, Ba, Pb, Th, and U in 11 types of edible nuts and seeds (macadamia nuts, lotus nuts, pistachios, sunflower seeds, pine nuts, almonds, walnuts, chestnuts, hazelnuts, cashews, and ginkgo nuts) as well as raisins were determined by inductively coupled plasma mass spectrometry (ICP-MS). The accuracy of the method was validated using standard reference materials GBW10014 (cabbage) and GBW10016 (tea). Our results provide useful information for evaluating the levels of trace elements in edible nuts in the Beijing market, will be helpful for improving food safety, and will aid in better protecting consumer interests. Copyright © 2015 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

Discrimination Between Closed and Open Shell (Turkish) Pistachio Nuts Using Undecimated Wavelet Packet Transform

USDA-ARS?s Scientific Manuscript database

Due to low consumer acceptance and the possibility of immature kernels, closed-shell pistachio nuts should be separated from open-shell nuts before reaching the consumer. The feasibility of a system using impact acoustics as a means of classifying closed-shell nuts from open-shell nuts has already b...

Wild capuchin monkeys adjust stone tools according to changing nut properties.

PubMed

Luncz, Lydia V; Falótico, Tiago; Pascual-Garrido, Alejandra; Corat, Clara; Mosley, Hannah; Haslam, Michael

2016-09-14

Animals foraging in their natural environments need to be proficient at recognizing and responding to changes in food targets that affect accessibility or pose a risk. Wild bearded capuchin monkeys (Sapajus libidinosus) use stone tools to access a variety of nut species, including otherwise inaccessible foods. This study tests whether wild capuchins from Serra da Capivara National Park in Brazil adjust their tool selection when processing cashew (Anacardium spp.) nuts. During the ripening process of cashew nuts, the amount of caustic defensive substance in the nut mesocarp decreases. We conducted field experiments to test whether capuchins adapt their stone hammer selection to changing properties of the target nut, using stones of different weights and two maturation stages of cashew nuts. The results show that although fresh nuts are easier to crack, capuchin monkeys used larger stone tools to open them, which may help the monkeys avoid contact with the caustic hazard in fresh nuts. We demonstrate that capuchin monkeys are actively able to distinguish between the maturation stages within one nut species, and to adapt their foraging behaviour accordingly.

Wild capuchin monkeys adjust stone tools according to changing nut properties

PubMed Central

Luncz, Lydia V.; Falótico, Tiago; Pascual-Garrido, Alejandra; Corat, Clara; Mosley, Hannah; Haslam, Michael

2016-01-01

Animals foraging in their natural environments need to be proficient at recognizing and responding to changes in food targets that affect accessibility or pose a risk. Wild bearded capuchin monkeys (Sapajus libidinosus) use stone tools to access a variety of nut species, including otherwise inaccessible foods. This study tests whether wild capuchins from Serra da Capivara National Park in Brazil adjust their tool selection when processing cashew (Anacardium spp.) nuts. During the ripening process of cashew nuts, the amount of caustic defensive substance in the nut mesocarp decreases. We conducted field experiments to test whether capuchins adapt their stone hammer selection to changing properties of the target nut, using stones of different weights and two maturation stages of cashew nuts. The results show that although fresh nuts are easier to crack, capuchin monkeys used larger stone tools to open them, which may help the monkeys avoid contact with the caustic hazard in fresh nuts. We demonstrate that capuchin monkeys are actively able to distinguish between the maturation stages within one nut species, and to adapt their foraging behaviour accordingly. PMID:27624672

Wild bearded capuchin monkeys (Sapajus libidinosus) strategically place nuts in a stable position during nut-cracking.

PubMed

Fragaszy, Dorothy M; Liu, Qing; Wright, Barth W; Allen, Angellica; Brown, Callie Welch; Visalberghi, Elisabetta

2013-01-01

Humans can use hand tools smoothly and effectively in varying circumstances; in other words, skillfully. A few other species of primates crack encased foods using hammer tools and anvils. Are they skilled? Positioning the food on the anvil so that it does not fall off when struck is a component of skilled cracking. We discovered that bearded capuchin monkeys deliberately place palm nuts in a relatively stable position on the anvil before striking them. In the first experiment, we marked the meridians of palm nuts where they stopped when rolled on a flat surface ("Stop meridian"). We videotaped monkeys as they cracked these nuts on an anvil. In playback we coded the position of the Stop meridian prior to each strike. Monkeys typically knocked the nuts on the anvil a few times before releasing them in a pit. They positioned the nuts so that the Stop meridian was within 30 degrees of vertical with respect to gravity more often than expected, and the nuts rarely moved after the monkeys released them. In the second experiment, 14 blindfolded people (7 men) asked to position marked nuts on an anvil as if to crack them reliably placed them with the Stop meridian in the same position as the monkeys did. In the third experiment, two people judged that palm nuts are most bilaterally symmetric along a meridian on, or close to, the Stop meridian. Thus the monkeys reliably placed the more symmetrical side of the nuts against the side of the pit, and the nuts reliably remained stationary when released. Monkeys apparently used information gained from knocking the nut to achieve this position. Thus, monkeys place the nuts skillfully, strategically managing the fit between the variable nuts and pits in the anvil, and skilled placement depends upon information generated by manual action.

Update on the healthful lipid constituents of commercially important tree nuts.

PubMed

Robbins, Katherine S; Shin, Eui-Cheol; Shewfelt, Robert L; Eitenmiller, Ronald R; Pegg, Ronald B

2011-11-23

Uncharacteristic of most whole foods, the major component of tree nuts is lipid; surprisingly, information on the lipid constituents in tree nuts has been sporadic and, for the most part, not well reported. Most published papers focus on only one nut type, or those that report a cultivar lack a quality control program, thus making data comparisons difficult. The present study was designed to quantify the healthful lipid constituents of 10 different types of commercially important tree nuts (i.e., almonds, black walnuts, Brazil nuts, cashews, English walnuts, hazelnuts, macadamias, pecans, pine nuts, and pistachios) according to standardized, validated methods. The total lipid content of each nut type ranged from 44.4 ± 1.9% for cashews to 77.1 ± 1.7% for macadamias. As expected, the major fatty acids present in the tree nuts were unsaturated: oleic (18:1 ω9) and linoleic (18:2 ω6) acids. A majority of the lipid extracts contained <10% saturated fatty acids with the exceptions of Brazil nuts (24.5%), cashews (20.9%), macadamias (17.1%), and pistachios (13.3%). The total tocopherol (T) content ranged from 1.60 ± 1.27 mg/100 g nutmeat in macadamias to 32.99 ± 0.78 in black walnuts. The predominant T isomers in the nut types were α- and γ-T. Tocotrienols were also detected, but only in 6 of the 10 nut types (i.e., Brazil nut, cashews, English walnuts, macadamias, pine nuts, and pistachios). In most cases, total phytosterol contents were greater in the present study than reported in peer-reviewed journal papers and the USDA National Nutrient Database for Standard Reference, which is attributed to total lipid extraction and the inclusion of steryl glucosides in the analysis; the levels were highest for pistachios (301.8 ± 15.4 mg/100 g nutmeat) and pine nuts (271.7 ± 9.1 mg/100 g nutmeat). Minor sterols were also quantified and identified using GC-FID and GC-MS techniques.

Wild Bearded Capuchin Monkeys (Sapajus libidinosus) Strategically Place Nuts in a Stable Position during Nut-Cracking

PubMed Central

Fragaszy, Dorothy M.; Liu, Qing; Wright, Barth W.; Allen, Angellica; Brown, Callie Welch; Visalberghi, Elisabetta

2013-01-01

Humans can use hand tools smoothly and effectively in varying circumstances; in other words, skillfully. A few other species of primates crack encased foods using hammer tools and anvils. Are they skilled? Positioning the food on the anvil so that it does not fall off when struck is a component of skilled cracking. We discovered that bearded capuchin monkeys deliberately place palm nuts in a relatively stable position on the anvil before striking them. In the first experiment, we marked the meridians of palm nuts where they stopped when rolled on a flat surface (“Stop meridian”). We videotaped monkeys as they cracked these nuts on an anvil. In playback we coded the position of the Stop meridian prior to each strike. Monkeys typically knocked the nuts on the anvil a few times before releasing them in a pit. They positioned the nuts so that the Stop meridian was within 30 degrees of vertical with respect to gravity more often than expected, and the nuts rarely moved after the monkeys released them. In the second experiment, 14 blindfolded people (7 men) asked to position marked nuts on an anvil as if to crack them reliably placed them with the Stop meridian in the same position as the monkeys did. In the third experiment, two people judged that palm nuts are most bilaterally symmetric along a meridian on, or close to, the Stop meridian. Thus the monkeys reliably placed the more symmetrical side of the nuts against the side of the pit, and the nuts reliably remained stationary when released. Monkeys apparently used information gained from knocking the nut to achieve this position. Thus, monkeys place the nuts skillfully, strategically managing the fit between the variable nuts and pits in the anvil, and skilled placement depends upon information generated by manual action. PMID:23460793

Machine recognition of navel orange worm damage in X-ray images of pistachio nuts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keagy, P.M.; Schatzki, T.F.; Parvin, B.

Insect infestation increases the probability of aflatoxin contamination in pistachio nuts. A non-destructive test is currently not available to determine the insect content of pistachio nuts. This paper presents the use of film X-ray images of various types of pistachio nuts to assess the possibility of machine recognition of insect infested nuts. Histogram parameters of four derived images are used in discriminant functions to select insect infested nuts from specific processing streams.

Prevalence of areca nut chewing in the middle school-going children of Indore, India

PubMed Central

Khandelwal, Ashok; Khandelwal, Vishal; Saha, Mainak K.; Khandelwal, Sushma; Prasad, Sai; Saha, Suparana G.

2012-01-01

Objectives: To assess areca nut chewing habit among middle school-aged children in Indore, India. Areca nut is chewed by itself, and in various scented preparations. It is associated with carcinogenesis, foreign body aspiration in children, and oral submucous fibrosis and may aggravate asthma. Materials and Methods: A retrospective collection of data to evaluate the prevalence of areca nut chewing among 3896 children was done. A simple random sampling was done. Children of both sexes were included in this study. Results: 27.06% of the school-going children (1054/3896) had areca nut chewing habit. More boys chewed areca nut than girls (2:1). 45.42% of school going children of rural area pander to areca nut chewing habit, whereas in urban area 20.09% children are indulged. Government school children are more involved in areca nut chewing habit. 81.02% of the children used sweetened and flavoured form of areca nut. The majority of the users were not aware of harmful effects that the use of areca nut might be harmful for health Conclusion: To diminish the use of areca nut, the Indian Government should consider limiting trade, advertising, and actively communicating its health risks to the public and should deem heavy taxes on it. PMID:22919213

The effect of tree nut, peanut, and soy nut consumption on blood pressure: a systematic review and meta-analysis of randomized controlled clinical trials.

PubMed

Mohammadifard, Noushin; Salehi-Abargouei, Amin; Salas-Salvadó, Jordi; Guasch-Ferré, Marta; Humphries, Karin; Sarrafzadegan, Nizal

2015-05-01

Although several studies have assessed the effects of nut consumption (tree nuts, peanuts, and soy nuts) on blood pressure (BP), the results are conflicting. The aim was to conduct a systematic review and meta-analysis of published randomized controlled trials (RCTs) to estimate the effect of nut consumption on BP. The databases MEDLINE, SCOPUS, ISI Web of Science, and Google Scholar were searched for RCTs carried out between 1958 and October 2013 that reported the effect of consuming single or mixed nuts (including walnuts, almonds, pistachios, cashews, hazelnuts, macadamia nuts, pecans, peanuts, and soy nuts) on systolic BP (SBP) or diastolic BP (DBP) as primary or secondary outcomes in adult populations aged ≥18 y. Relevant articles were identified by screening the abstracts and titles and the full text. Studies that evaluated the effects for <2 wk or in which the control group ingested different healthy oils were excluded. Mean ± SD changes in SBP and DBP in each treatment group were recorded for meta-analysis. Twenty-one RCTs met the inclusion criteria. Our findings suggest that nut consumption leads to a significant reduction in SBP in participants without type 2 diabetes [mean difference (MD): -1.29; 95% CI: -2.35, -0.22; P = 0.02] but not in the total population. Subgroup analyses of different nut types suggest that pistachios, but not other nuts, significantly reduce SBP (MD: -1.82; 95% CI: -2.97, -0.67; P = 0.002). Our study suggests that pistachios (MD: -0.80; 95% CI: -1.43, -0.17; P = 0.01) and mixed nuts (MD: -1.19; 95% CI: -2.35, -0.03; P = 0.04) have a significant reducing effect on DBP. We found no significant changes in DBP after the consumption of other nuts. Total nut consumption lowered SBP in participants without type 2 diabetes. Pistachios seemed to have the strongest effect on reducing SBP and DBP. Mixed nuts also reduced DBP. © 2015 American Society for Nutrition.

Prevalence and factors associated with the consumption of betel-nut among military conscripts in Taiwan.

PubMed

Lin, Yaoh-Shiang; Chu, Nain-Feng; Wu, Der-Min; Shen, Mu-Han

2004-01-01

This study evaluates the prevalence of betel-nut chewing among military personnel stationed on Taiwan's offshore islands. Furthermore, this study examines variables to identify which may predict a greater predilection toward betel-nut chewing among the conscript population studied. A cross-sectional mass screening was conducted of compulsory military service personnel stationed on Taiwan's offshore islands between August 1 and December 31, 2001. A total of 7574 military employees were included in this survey. Information regarding betel-nut chewing habits were ascertained using a standard structured questionnaire, which including the level and duration of betel-nut chewing as well as respondents' knowledge, attitude and practices with regard to consumption of this product. Conscripts were found to be less likely to chew betel-nut regularly while performing military service. There are 1535 (20.3%) of respondents reporting to habitually chew betel-nut prior to active duty shrank to 1048 (13.8%) after going on active-duty. The most reasons to chew betel-nut among the recruits after military services are curiosity (33.3%) and as a stimulant (29.8%). About 46% of military employees who currently chew betel-nut report an interest to quit in the future. The risk factors for betel-nut chewing include individual factors (e.g., age, education, knowledge, and attitude toward betel-nut chewing), lifestyle habits (e.g., cigarette smoking), and familial factors (e.g., consumption of betel-nut by parents). More interesting, the recruits had the habit of cigarette smoking associated with increase risk for betel-nut chewing (OR: 7.18; 95% CI: 5.66-9.20). Although the military has made considerable progress in reducing betel-nut chewing on military campuses, the prevalence of betel-nut chewing is still relatively high and, in 2001, affected about one quarter of all military personnel stationed on the abovementioned offshore islands. In future efforts to lower betel-nut consumption among high risk groups, targeting the group of conscripted military personnel described in this study should be considered.

Virtual estimates of fastening strength for pedicle screw implantation procedures

NASA Astrophysics Data System (ADS)

Linte, Cristian A.; Camp, Jon J.; Augustine, Kurt E.; Huddleston, Paul M.; Robb, Richard A.; Holmes, David R.

2014-03-01

Traditional 2D images provide limited use for accurate planning of spine interventions, mainly due to the complex 3D anatomy of the spine and close proximity of nerve bundles and vascular structures that must be avoided during the procedure. Our previously developed clinician-friendly platform for spine surgery planning takes advantage of 3D pre-operative images, to enable oblique reformatting and 3D rendering of individual or multiple vertebrae, interactive templating, and placement of virtual pedicle implants. Here we extend the capabilities of the planning platform and demonstrate how the virtual templating approach not only assists with the selection of the optimal implant size and trajectory, but can also be augmented to provide surrogate estimates of the fastening strength of the implanted pedicle screws based on implant dimension and bone mineral density of the displaced bone substrate. According to the failure theories, each screw withstands a maximum holding power that is directly proportional to the screw diameter (D), the length of the in-bone segm,ent of the screw (L), and the density (i.e., bone mineral density) of the pedicle body. In this application, voxel intensity is used as a surrogate measure of the bone mineral density (BMD) of the pedicle body segment displaced by the screw. We conducted an initial assessment of the developed platform using retrospective pre- and post-operative clinical 3D CT data from four patients who underwent spine surgery, consisting of a total of 26 pedicle screws implanted in the lumbar spine. The Fastening Strength of the planned implants was directly assessed by estimating the intensity - area product across the pedicle volume displaced by the virtually implanted screw. For post-operative assessment, each vertebra was registered to its homologous counterpart in the pre-operative image using an intensity-based rigid registration followed by manual adjustment. Following registration, the Fastening Strength was computed for each displaced bone segment. According to our preliminary clinical study, a comparison between Fastening Strength, displaced bone volume and mean voxel intensity showed similar results (p < 0.1) between the virtually templated plans and the post-operative outcome following the traditional clinical approach. This study has demonstrated the feasibility of the platform in providing estimates the pedicle screw fastening strength via virtual implantation, given the intrinsic vertebral geometry and bone mineral density, enabling the selection of the optimal implant dimension adn trajectory for improved strength.

Children monosensitized to pine nuts have similar patterns of sensitization.

PubMed

Novembre, Elio; Mori, Francesca; Barni, Simona; Ferrante, Giuliana; Pucci, Neri; Ballabio, Cinzia; Uberti, Francesca; Penas, Elena; Restani, Patrizia

2012-12-01

Several cases of pine nut allergies and anaphylaxis have been reported in the literature, but only few pine nut allergens have been characterized. The aim of this research is to identify through immunoelectrophoretic techniques the major pine nut allergens in a group of children monosensitized to pine nuts. We studied five children with pine nut allergies and no other sensitization to food except to pine nuts, confirmed by in vivo (prick test, prick-to-prick) and in vitro tests (specific IgE determinations [CAP-FEIA]). The protein profile of pine nuts was analyzed by Sodium Dodecyl sulfate Polyacrylamide Gel Electrophoresis (SDS-PAGE). Immunoblotting was performed after incubation of membranes with the sera from the children included in the present study. Immunoblotting (SDS-PAGE) demonstrated five similar bands between 6 and 47 kDa in all the subjects studied. These bands should be considered the potential allergens for pine nut allergic children. © 2012 John Wiley & Sons A/S.

Nuclear fuel element nut retainer cup. [PWR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walton, L.A.

1977-07-19

A typical embodiment has an end fitting for a nuclear reactor fuel element that is joined to the control rod guide tubes by means of a nut plate assembly. The nut plate assembly has an array of nuts, each engaging the respective threaded end of the control rod guide tubes. The nuts, moreover, are retained on the plate during handling and before fuel element assembly by means of hollow cylindrical locking cups that are brazed to the plate and loosely circumscribe the individual enclosed nuts. After the nuts are threaded onto the respective guide tube ends, the locking cups aremore » partially deformed to prevent one or more of the nuts from working loose during reactor operation. The locking cups also prevent loose or broken end fitting parts from becoming entrained in the reactor coolant.« less

Tree nut allergens.

PubMed

Geiselhart, Sabine; Hoffmann-Sommergruber, Karin; Bublin, Merima

2018-04-18

Tree nuts are considered as part of a healthy diet due to their high nutritional quality. However, they are also a potent source of allergenic proteins inducing IgE mediated hypersensitivity often causing serious, life-threatening reactions. The reported prevalence of tree nut allergy is up to 4.9% worldwide. The general term "tree nuts" comprises a number of nuts, seeds, and drupes, derived from trees from different botanical families. For hazelnut and walnut several allergens have been identified which are already partly applied in component resolved diagnosis, while for other tree nuts such as macadamia, coconut, and Brazil nut only individual allergens were identified and data on additional allergenic proteins are missing. This review summarizes the current knowledge on tree nut allergens and describes their physicochemical and immunological characterization and clinical relevance. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Is areca innocent? The effect of areca (betel) nut chewing in a population of pregnant women on the Thai-Myanmar border.

PubMed

Chue, Amy L; Carrara, Verena I; Paw, Moo Kho; Pimanpanarak, Mupawjay; Wiladphaingern, Jacher; van Vugt, Michele; Lee, Sue J; Nosten, François; McGready, Rose

2012-09-01

Eight manuscripts have specifically examined the effects of areca (betel) nut use in pregnant women, seven of which have documented adverse effects on birth weight, newborn neurological status, gender ratio and pregnancy outcomes such as anaemia and miscarriage following areca nut use during pregnancy. A retrospective cohort analysis of migrant and refugee pregnant women attending antenatal clinics along the Thai-Myanmar border (July 1997 to November 2006) was conducted to examine the adverse effects of areca nut use routinely recorded on enrolment. Of 7685 women, 2284 (29.7%) never used areca or smoked (cheroots), 2484 (32.3%) only used areca, 438 (5.7%) only smoked cheroots and 2479 (32.3%) used both areca and cheroots. Pieces of ripe areca nut in a leaf with lime, without tobacco, were used particularly among older multigravid women. Adverse pregnancy effects were not observed in areca nut users compared with non-users. Smoking, but not areca nut use, had a dose-related effect on miscarriage. Areca nut use in conjunction with smoking reduced the adverse effects of smoking on birth weight, further supporting a lack of effect of areca nut. Areca (betel) nut-related adverse pregnancy outcomes were not observed in this population, whereas smoking was clearly harmful. Differences from previous reports may result from the amount or types of areca nut, or quid content, consumed between countries. Smoking, but not areca nut, reduction is likely to improve pregnancy outcomes on the Thai-Myanmar border.

1001518

NASA Image and Video Library

2010-09-01

DEVELOPMENT TESTING BEING CONDUCTED AT THE REQUEST OF THE MSFC DYNAMICS, LOADS, AND STRENGTH BRANCH (EV31) TO STUDY THE FAILURE BEHAVIOR OF FASTENERS SUBJECTED TO COMBINED SHEAR AND TENSION LOADING. THE DATA FROM THIS TESTING WILL BE USED TO DEVELOP APPROPRIATE STRUCTURAL ANALYSIS METHODS AS PART OF A FASTENER STANDARDS EFFORT SPONSORED BY THE NASA ENGINEERING SAFETY CENTER (NESC). THE TEST FIXTURE WAS DESIGNED AND FABRICATED THROUGH THE MSFC MECHANICAL FABRICATION BRANCH (ES23). THE TESTING ORGANIZATION IS THE MSFC MATERIALS TEST BRANCH (EM10).

1001519

NASA Image and Video Library

2010-09-01

DEVELOPMENT TESTING BEING CONDUCTED AT THE REQUEST OF THE MSFC DYNAMICS, LOADS, AND STRENGTH BRANCH (EV31) TO STUDY THE FAILURE BEHAVIOR OF FASTENERS SUBJECTED TO COMBINED SHEAR AND TENSION LOADING. THE DATA FROM THIS TESTING WILL BE USED TO DEVELOP APPROPRIATE STRUCTURAL ANALYSIS METHODS AS PART OF A FASTENER STANDARDS EFFORT SPONSORED BY THE NASA ENGINEERING SAFETY CENTER (NESC). THE TEST FIXTURE WAS DESIGNED AND FABRICATED THROUGH THE MSFC MECHANICAL FABRICATION BRANCH (ES23). THE TESTING ORGANIZATION IS THE MSFC MATERIALS TEST BRANCH (EM10).

1001520

NASA Image and Video Library

2010-09-01

DEVELOPMENT TESTING BEING CONDUCTED AT THE REQUEST OF THE MSFC DYNAMICS, LOADS, AND STRENGTH BRANCH (EV31) TO STUDY THE FAILURE BEHAVIOR OF FASTENERS SUBJECTED TO COMBINED SHEAR AND TENSION LOADING. THE DATA FROM THIS TESTING WILL BE USED TO DEVELOP APPROPRIATE STRUCTURAL ANALYSIS METHODS AS PART OF A FASTENER STANDARDS EFFORT SPONSORED BY THE NASA ENGINEERING SAFETY CENTER (NESC). THE TEST FIXTURE WAS DESIGNED AND FABRICATED THROUGH THE MSFC MECHANICAL FABRICATION BRANCH (ES23). THE TESTING ORGANIZATION IS THE MSFC MATERIALS TEST BRANCH (EM10).

1001521

NASA Image and Video Library

2010-09-01

DEVELOPMENT TESTING BEING CONDUCTED AT THE REQUEST OF THE MSFC DYNAMICS, LOADS, AND STRENGTH BRANCH (EV31) TO STUDY THE FAILURE BEHAVIOR OF FASTENERS SUBJECTED TO COMBINED SHEAR AND TENSION LOADING. THE DATA FROM THIS TESTING WILL BE USED TO DEVELOP APPROPRIATE STRUCTURAL ANALYSIS METHODS AS PART OF A FASTENER STANDARDS EFFORT SPONSORED BY THE NASA ENGINEERING SAFETY CENTER (NESC). THE TEST FIXTURE WAS DESIGNED AND FABRICATED THROUGH THE MSFC MECHANICAL FABRICATION BRANCH (ES23). THE TESTING ORGANIZATION IS THE MSFC MATERIALS TEST BRANCH (EM10).

Human-Assisted-Manufacturing Model Library

DTIC Science & Technology

2012-06-01

Handwrite 1 Word Continuous H21 0.04515 1 Word Discontinuous H25 0.05375 1 Word Upper Case H35 0.07525 1 Character Continuous H4 0.0086...also needs to include the relationship that says “this fastener connects these parts”. If this information is not explicitly included in the design...fasteners (or structural interface definitions) have been attached. Note that if after doing this there is NOT a single tree, we can say that the

Development, Vibration, and Thermal Characterization of a Steady Operating Pulsed Power System for FRC Thrusters

DTIC Science & Technology

2015-04-01

to successfully operate after being exposed to the harsh launch vibration environment. 2. Uncover workmanship flaws such as loose fasteners or weak...uncover any workmanship errors in spite of exposing the PPUs to vibration levels in excess of what is expected for flight on any of the launchers ...successfully operate after being exposed to the harsh launch vibration environment. 2. Uncover workmanship flaws such as loose fasteners or weak

Seawater Corrosion of Fasteners in Various Structural Materials

DTIC Science & Technology

1976-04-01

17 - 4PH stainless steel. The seven bolt materials were: 2024 aluminum, anodized ASTM grade 5 steel, 304 and 316 stainless steels, A286 stain- less...performed well in titanium structures. Use of MP35N, A286, and 304 stainless steel fasteners for constantly immersed 17 - 4PH stainless steel structures...would have been satisfactory only if sealant was not used and if protection had been provided to the 17 - 4PH to minimize crevice corrosion. Additional

Evaluation and Application of GRP Composite Fasteners for Sonar Dome Components

DTIC Science & Technology

1999-10-01

the USA were contacted in order to obtain information on commercially available composite fasteners (see Koko et al. 1998). Information was obtained...Santa Anna, California, (1996). Koko , T.S., Connor, M.J. and Corbett, C.V. (1997). "Development of a Composite Fairing Band Assembly for A...Stainless Steel Sonar Dome". Proceedings ofiCCM-11, Gold Coast Australia, pp. I-426 - I-435. Koko , T.S. (1998). "Development of Prototype Composite

Channel nut tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, Marvin

A method, system, and apparatus for installing channel nuts includes a shank, a handle formed on a first end of a shank, and an end piece with a threaded shaft configured to receive a channel nut formed on the second end of the shaft. The tool can be used to insert or remove a channel nut in a channel framing system and then removed from the channel nut.

Nezara viridula (Hemiptera: Pentatomidae) feeding patterns in macadamia nut in Hawaii: nut maturity and cultivar effects.

PubMed

Follett, Peter A; Wright, Mark G; Golden, Mary

2009-08-01

Nezara viridula L. (Hemiptera: Pentatomidae) is a serious pest of macadamia nuts, Macadamia integrifolia, in Hawaii. Using ruthenium red dye to stain stink bug feeding probes, feeding activity was determined for nuts of various maturity levels harvested from the tree and off the ground throughout the growing season in five commercial cultivars. Damage occurred in the tree and on the ground during all nut growth stages. Damage on the ground was often higher than in the tree. Cultivar 246 was more susceptible to attack than cultivars 333 and 800. It was previously thought that cultivar susceptibility was related to husk and shell thickness, but cultivar 246 showed higher damage than other cultivars even during early nut development when the nuts are small and before the shell has formed. This suggests that shell and husk thickness may play a secondary role in susceptibility to feeding by N. viridula. Monitoring N. viridula feeding activity during early nut development may help alert growers to potential problems later in the season, but early-season probing activity in immature nuts was not a good predictor of damage levels in mature nuts later in the season in our study.

Tree Nuts Are Inversely Associated with Metabolic Syndrome and Obesity: The Adventist Health Study-2

PubMed Central

Jaceldo-Siegl, Karen; Haddad, Ella; Oda, Keiji; Fraser, Gary E.; Sabaté, Joan

2014-01-01

Objective To examine the relationships of nut consumption, metabolic syndrome (MetS), and obesity in the Adventist Health Study-2, a relatively healthy population with a wide range of nut intake. Research Design and Methods Cross-sectional analysis was conducted on clinical, dietary, anthropometric, and demographic data of 803 adults. MetS was defined according to the American Heart Association and the National Heart, Lung, and Blood Institute diagnostic criteria. We assessed intake of total nuts, tree nuts and peanuts, and also classified subjects into low tree nut/low peanut (LT/LP), low tree/high peanut (LT/HP), high tree nut/high peanut (HT/HP), and high tree/low peanut (HT/LP) consumers. Odds ratios were estimated using multivariable logistic regression. Results 32% of subjects had MetS. Compared to LT/LP consumers, obesity was lower in LT/HP (OR = 0.89; 95% CI = 0.53, 1.48), HT/HP (OR = 0.63; 95% CI = 0.40, 0.99) and HT/LP (OR = 0.54; 95% CI = 0.34, 0.88) consumers, p for trend = 0.006. For MetS, odds ratios (95% CI) were 0.77 (0.47, 1.28), 0.65 (0.42, 1.00) and 0.68 (0.43, 1.07), respectively (p for trend = 0.056). Frequency of nut intake (once/week) had significant inverse associations with MetS (3% less for tree nuts and 2% less for total nuts) and obesity (7% less for tree nuts and 3% less for total nuts). Conclusions Tree nuts appear to have strong inverse association with obesity, and favorable though weaker association with MetS independent of demographic, lifestyle and dietary factors. PMID:24416351

Tree nuts are inversely associated with metabolic syndrome and obesity: the Adventist health study-2.

PubMed

Jaceldo-Siegl, Karen; Haddad, Ella; Oda, Keiji; Fraser, Gary E; Sabaté, Joan

2014-01-01

To examine the relationships of nut consumption, metabolic syndrome (MetS), and obesity in the Adventist Health Study-2, a relatively healthy population with a wide range of nut intake. Cross-sectional analysis was conducted on clinical, dietary, anthropometric, and demographic data of 803 adults. MetS was defined according to the American Heart Association and the National Heart, Lung, and Blood Institute diagnostic criteria. We assessed intake of total nuts, tree nuts and peanuts, and also classified subjects into low tree nut/low peanut (LT/LP), low tree/high peanut (LT/HP), high tree nut/high peanut (HT/HP), and high tree/low peanut (HT/LP) consumers. Odds ratios were estimated using multivariable logistic regression. 32% of subjects had MetS. Compared to LT/LP consumers, obesity was lower in LT/HP (OR = 0.89; 95% CI = 0.53, 1.48), HT/HP (OR = 0.63; 95% CI = 0.40, 0.99) and HT/LP (OR = 0.54; 95% CI = 0.34, 0.88) consumers, p for trend = 0.006. For MetS, odds ratios (95% CI) were 0.77 (0.47, 1.28), 0.65 (0.42, 1.00) and 0.68 (0.43, 1.07), respectively (p for trend = 0.056). Frequency of nut intake (once/week) had significant inverse associations with MetS (3% less for tree nuts and 2% less for total nuts) and obesity (7% less for tree nuts and 3% less for total nuts). Tree nuts appear to have strong inverse association with obesity, and favorable though weaker association with MetS independent of demographic, lifestyle and dietary factors.

21 CFR 164.120 - Shelled nuts in rigid or semirigid containers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products § 164.120 Shelled nuts in rigid or semirigid containers. (a)-(b...

21 CFR 164.120 - Shelled nuts in rigid or semirigid containers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products § 164.120 Shelled nuts in rigid or semirigid containers. (a)-(b...

21 CFR 164.120 - Shelled nuts in rigid or semirigid containers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products § 164.120 Shelled nuts in rigid or semirigid containers. (a)-(b...

21 CFR 164.120 - Shelled nuts in rigid or semirigid containers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products § 164.120 Shelled nuts in rigid or semirigid containers. (a)-(b...

21 CFR 164.120 - Shelled nuts in rigid or semirigid containers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION TREE NUT AND PEANUT PRODUCTS Requirements for Specific Standardized Tree Nut and Peanut Products § 164.120 Shelled nuts in rigid or semirigid containers. (a)-(b...

BSACI guideline for the diagnosis and management of peanut and tree nut allergy.

PubMed

Stiefel, G; Anagnostou, K; Boyle, R J; Brathwaite, N; Ewan, P; Fox, A T; Huber, P; Luyt, D; Till, S J; Venter, C; Clark, A T

2017-06-01

Peanut nut and tree nut allergy are characterised by IgE mediated reactions to nut proteins. Nut allergy is a global disease. Limited epidemiological data suggest varying prevalence in different geographical areas. Primary nut allergy affects over 2% of children and 0.5% of adults in the UK. Infants with severe eczema and/or egg allergy have a higher risk of peanut allergy. Primary nut allergy presents most commonly in the first five years of life, often after the first known ingestion with typical rapid onset IgE-mediated symptoms. The clinical diagnosis of primary nut allergy can be made by the combination of a typical clinical presentation and evidence of nut specifc IgE shown by a positive skin prick test (SPT) or specific IgE (sIgE) test. Pollen food syndrome is a distinct disorder, usually mild, with oral/pharyngeal symptoms, in the context of hay fever or pollen sensitisation, which can be triggered by nuts. It can usually be distinguish clinically from primary nut allergy. The magnitude of a SPT or sIgE relates to the probability of clinical allergy, but does not relate to clinical severity. SPT of ≥ 8 mm or sIgE ≥ 15 KU/L to peanut is highly predictive of clinical allergy. Cut off values are not available for tree nuts. Test results must be interpreted in the context of the clinical history. Diagnostic food challenges are usually not necessary but may be used to confirm or refute a conflicting history and test result. As nut allergy is likely to be a long-lived disease, nut avoidance advice is the cornerstone of management. Patients should be provided with a comprehensive management plan including avoidance advice, patient specific emergency medication and an emergency treatment plan and training in administration of emergency medication. Regular re-training is required. © 2017 John Wiley & Sons Ltd.

[Fifth Jesús Culebras Lecture; Tree nuts: effects on health, obesity and metabolic syndrome].

PubMed

Salas-Salvadó, Jordi

2014-11-30

Several epidemiological studies have shown that consumption of tree nuts is associated with lower cardiovascular risk, specific cause of mortality and total mortality. Clinical feeding trials have demonstrated that tree nuts protect from cardiovascular disease risk through different mechanisms: regulating inflammatory processes, oxidative stress and endothelial function, thereby improving various cardiovascular risk factors. In the context of meals high in carbohydrates, tree nuts reduce the postprandial glucose peaks, improving insulin resistance. Frequent consumption of nuts has been associated with a lower risk of diabetes in women, but the effect was not yet elucidated in men. Although tree nuts are energetically dense and they are high in fat, nut consumption does not imply appreciable weight gain nor has been associated with a higher risk of abdominal obesity. Tree nut consumption reduces LDL cholesterol levels, but its effects on atherogenic dyslipidemia associated to metabolic syndrome (MetS) are less clear. The effect of consumption of nuts on LDL cholesterol in subjects with MetS neither has been well established, but it seems that in these patients could lower plasma triglyceride levels. Some studies suggest an inverse association between tree nut consumption and blood pressure or endothelial function, especially in non-diabetic individuals. Nut consumption was inversely related to the prevalence and incidence of MetS. Including tree nuts in the context of a healthy dietary pattern way increase the health benefits. It has been observed a lower prevalence of MetS and a lower incidence of diabetes in people who adhered to a Mediterranean diet supplemented with nuts. Future nutrition intervention studies are needed on large samples of subjects and long follow-up to affirm that tree nut consumption has beneficial effects on the prevention and treatment of MetS. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

PREVALENCE AND FACTORS INFLUENCING BETEL NUT CHEWING AMONG ADULTS IN WEST INSEIN TOWNSHIP, YANGON, MYANMAR.

PubMed

Myint, Su Kyaw; Narksawat, Kulaya; Sillabutra, Jutatip

2016-09-01

Betel nut chewing can cause precancerous oral lesions and is common in Myanmar. We conducted a cross sectional study aimed to estimate prevalence and factors influencing betel nut chewing among 420 subjects aged ≥18 years in West Insein Township, Yangon, Myanmar in order to inform preventive health programs. The mean age of the study subjects was 45(±15) years. The overall prevalence of current betel nut chewing among study subjects was 55.2%. The mean age starting betel nut chewing was 29(±13) years, and the mean duration of chewing was 15(±13) years. The reasons given by study subjects for chewing betel nut included the addictive effect to betel nut, to release tension, to get rid of boredom and to stop smoking. Sixty-two point three percent of current betel nut chewers also chewed tobacco and 24.2% also smoked cigarettes. Factors significantly associated with betel nut chewing were male gender, current alcohol consumer, having no education or finishing primary or secondary school, having a low score regarding their attitude about the health effects of betel nut chewing, and having high score on interpersonal factors by family and peer pressure. Our results show a need to better educate the public about the health effects of betel nut chewing among the study population.

Oral Cancer - Multiple Languages

MedlinePlus

... a new window. Burmese (myanma bhasa) Expand Section Betel Nut - English PDF Betel Nut - myanma bhasa (Burmese) PDF Orange County North ... California Dental Association Karen (S’gaw Karen) Expand Section Betel Nut - English PDF Betel Nut - S’gaw Karen (Karen) ...

Pine nut use in the Early Holocene and beyond: The danger cave archaeobotanical record

USGS Publications Warehouse

Rhode, D.; Madsen, D.B.

1998-01-01

Nuts of limber pine (Pinus flexilis) from Early Holocene strata in Danger Cave, Utah, are distinguishable by seed-coat sculpturing from pine nuts of single-needled pinyon (Pinus monophylla), which occur in strata dating <7000 years BP. Owls and other taphonomic agents may deposit pine nuts in archaeological sites, but the morphology of the pine nuts in Danger Cave strongly indicate they were deposited by human foragers who brought small quantities with them for food for at least the last 7500 years. Large-scale transport of pine nuts to Danger Cave from distant hinterlands is unlikely, however. The seamless transition from limber pine to pinyon pine nuts in the Danger Cave record suggests that foragers who had utilized limber pine as a food resource easily switched to using pinyon pine nuts when pinyon pine migrated into the region at the close of the Early Holocene.

Expanded image database of pistachio x-ray images and classification by conventional methods

NASA Astrophysics Data System (ADS)

Keagy, Pamela M.; Schatzki, Thomas F.; Le, Lan Chau; Casasent, David P.; Weber, David

1996-12-01

In order to develop sorting methods for insect damaged pistachio nuts, a large data set of pistachio x-ray images (6,759 nuts) was created. Both film and linescan sensor images were acquired, nuts dissected and internal conditions coded using the U.S. Grade standards and definitions for pistachios. A subset of 1199 good and 686 insect damaged nuts was used to calculate and test discriminant functions. Statistical parameters of image histograms were evaluated for inclusion by forward stepwise discrimination. Using three variables in the discriminant function, 89% of test set nuts were correctly identified. Comparable data for 6 human subjects ranged from 67 to 92%. If the loss of good nuts is held to 1% by requiring a high probability to discard a nut as insect damaged, approximately half of the insect damage present in clean pistachio nuts may be detected and removed by x-ray inspection.

Betel nut usage is a major risk factor for coronary artery disease.

PubMed

Khan, Muhammad Shahzeb; Bawany, Faizan Imran; Ahmed, Muhammad Umer; Hussain, Mehwish; Khan, Asadullah; Lashari, Muhammad Nawaz

2013-12-27

The objective of our study was to assess betel nut usage as one of the major risk factors associated with coronary artery disease. This case control study consisted of 300 controls and 300 cases. A structured questionnaire was administered to the participants to assess consumption of betel nut and confounding variables. A respondent was considered a regular consumer of betel nut if he/she consumed one or more pieces of betel nut every day for a period of greater than 6 months. About 8 in 10 betel nut chewers developed coronary artery disease. After adjusting for diabetes and hypertension, the odds ratio analysis depicted 7.72 times greater likelihood for coronary artery disease in patients who chewed betel nut for more than 10 years. Our study concludes that betel nut chewing is a significant risk factor leading to the development of coronary artery disease.

Betel Nut Usage Is a Major Risk Factor for Coronary Artery Disease

PubMed Central

Khan, Muhammad Shahzeb; Bawany, Faizan Imran; Ahmed, Muhammad Umer; Hussain, Mehwish; Khan, Asadullah; Lashari, Muhammad Nawaz

2014-01-01

Aim: The objective of our study was to assess betel nut usage as one of the major risk factors associated with coronary artery disease. Methods: This case control study consisted of 300 controls and 300 cases. A structured questionnaire was administered to the participants to assess consumption of betel nut and confounding variables. A respondent was considered a regular consumer of betel nut if he/she consumed one or more pieces of betel nut every day for a period of greater than 6 months. Results: About 8 in 10 betel nut chewers developed coronary artery disease. After adjusting for diabetes and hypertension, the odds ratio analysis depicted 7.72 times greater likelihood for coronary artery disease in patients who chewed betel nut for more than 10 years. Conclusion: Our study concludes that betel nut chewing is a significant risk factor leading to the development of coronary artery disease. PMID:24576380

The effect of Korean pine nut oil on in vitro CCK release, on appetite sensations and on gut hormones in post-menopausal overweight women.

PubMed

Pasman, Wilrike J; Heimerikx, Jos; Rubingh, Carina M; van den Berg, Robin; O'Shea, Marianne; Gambelli, Luisa; Hendriks, Henk F J; Einerhand, Alexandra W C; Scott, Corey; Keizer, Hiskias G; Mennen, Louise I

2008-03-20

Appetite suppressants may be one strategy in the fight against obesity. This study evaluated whether Korean pine nut free fatty acids (FFA) and triglycerides (TG) work as an appetite suppressant. Korean pine nut FFA were evaluated in STC-1 cell culture for their ability to increase cholecystokinin (CCK-8) secretion vs. several other dietary fatty acids from Italian stone pine nut fatty acids, oleic acid, linoleic acid, alpha-linolenic acid, and capric acid used as a control. At 50 muM concentration, Korean pine nut FFA produced the greatest amount of CCK-8 release (493 pg/ml) relative to the other fatty acids and control (46 pg/ml). A randomized, placebo-controlled, double-blind cross-over trial including 18 overweight post-menopausal women was performed. Subjects received capsules with 3 g Korean pine (Pinus koraiensis) nut FFA, 3 g pine nut TG or 3 g placebo (olive oil) in combination with a light breakfast. At 0, 30, 60, 90, 120, 180 and 240 minutes the gut hormones cholecystokinin (CCK-8), glucagon like peptide-1 (GLP-1), peptide YY (PYY) and ghrelin, and appetite sensations were measured. A wash-out period of one week separated each intervention day.CCK-8 was higher 30 min after pine nut FFA and 60 min after pine nut TG when compared to placebo (p < 0.01). GLP-1 was higher 60 min after pine nut FFA compared to placebo (p < 0.01). Over a period of 4 hours the total amount of plasma CCK-8 was 60% higher after pine nut FFA and 22% higher after pine nut TG than after placebo (p < 0.01). For GLP-1 this difference was 25% after pine nut FFA (P < 0.05). Ghrelin and PYY levels were not different between groups. The appetite sensation "prospective food intake" was 36% lower after pine nut FFA relative to placebo (P < 0.05). This study suggests that Korean pine nut may work as an appetite suppressant through an increasing effect on satiety hormones and a reduced prospective food intake.

The atopic dog as a model of peanut and tree nut food allergy.

PubMed

Teuber, Suzanne S; Del Val, Gregorio; Morigasaki, Susumu; Jung, Hye Rim; Eisele, Pamela H; Frick, Oscar L; Buchanan, Bob B

2002-12-01

Animal models are needed that mimic human IgE-mediated peanut and tree nut allergy. Atopic dogs have been previously used in a model of food allergy to cow's milk, beef, wheat, and soy, with the demonstration of specific IgE production and positive oral challenges similar to those seen in human subjects. We sought to sensitize dogs to peanut, walnut, and Brazil nut and to assess whether sensitization is accompanied by clinical reactions and whether there is cross-reactivity among the different preparations. Eleven dogs were sensitized subcutaneously by using an established protocol with 1 microg each of peanut, English walnut, or Brazil nut protein extracts in alum first at birth and then after modified live virus vaccinations at 3, 7, and 11 weeks of age. The dogs were sensitized to other allergens, including soy and either wheat or barley. Intradermal skin tests, IgE immunoblotting to nut proteins, and oral challenges were performed with ground nut preparations. At 6 months of age, the dogs' intradermal skin test responses were positive to the nut extracts. IgE immunoblotting to peanut, walnut, and Brazil nut showed strong recognition of proteins in the aqueous preparations. Each of the 4 peanut- and the 3 Brazil nut-sensitized dogs and 3 of the 4 walnut-sensitized dogs reacted on oral challenge with the corresponding primary immunogen at age 2 years. None of the peanut-sensitized dogs reacted clinically with walnut or Brazil nut challenges. One of the walnut-sensitized dogs had delayed (overnight) vomiting to Brazil nut. On the basis of measurements of the mean amount of allergen eliciting a skin test response in dogs, the hierarchy of reactivity by skin testing is similar to the clinical experience in human subjects (peanut > tree nuts > wheat > soy > barley). Cross-reactivity, which was not apparent between soy and peanut or tree nuts or between peanut and tree nuts, was slight between walnut and Brazil nut. The results give further support to the dog as a model of human food allergy.

Finite element analysis of the Space Shuttle 2.5-inch frangible nut

NASA Technical Reports Server (NTRS)

McKinnis, Darin N.

1994-01-01

Finite element analysis of the Space Shuttle 2.5-inch frangible nut was conducted to improve understanding of the current design and proposed design changes to this explosively-actuated nut. The 2.5-inch frangible nut is used in two places to attach the aft end of the Space Shuttle Orbiter to the External Tank. Both 2.5-inch frangible nuts must function to complete safe separation. The 2.5-inch frangible nut contains two explosive boosters containing RDX explosive each capable of splitting the nut in half, on command from the Orbiter computers. To ensure separation, the boosters are designed to be redundant. The detonation of one booster is sufficient to split the nut in half. However, beginning in 1987 some production lots of 2.5-inch frangible nuts have demonstrated an inability to separate using only a single booster. The cause of the failure has been attributed to differences in the material properties and response of the Inconel 718 from which the 2.5-inch frangible nut is manufactured. Subsequent tests have resulted in design modifications of the boosters and frangible nut. Model development and initial analysis was conducted by Sandia National Laboratories (SNL) under funding from NASA Lyndon B. Johnson Space Center (NASA-JSC) starting in 1992. Modeling codes previously developed by SNL were transferred to NASA-JSC for further analysis on this and other devices. An explosive bolt with NASA Standard Detonator (NSD) charge, a 3/4-inch frangible nut, and the Super*Zip linear separation system are being modeled by NASA-JSC.

Association of Nut Consumption with Cardiometabolic Risk Factors in the 2008/2009 New Zealand Adult Nutrition Survey

PubMed Central

Brown, Rachel C.; Tey, Siew Ling; Gray, Andrew R.; Chisholm, Alexandra; Smith, Claire; Fleming, Elizabeth; Parnell, Winsome

2015-01-01

Nut consumption has been associated with improvements in risk factors for chronic disease in populations within North America, Europe and Iran. This relationship has not been investigated in New Zealand (NZ). The associations between nut consumption and cardiometabolic risk factors among New Zealanders were examined. Data from the 24-h diet recalls of 4721 participants from the NZ Adult Nutrition Survey 2008/2009 (2008/2009 NZANS) were used to determine whole and total nut intake. Anthropometric data and blood pressure were collected, as well as blood samples analysed for total cholesterol (total-C) and HDL cholesterol (HDL-C), glycated haemoglobin (HbA1c), C-reactive protein (CRP) and folate. Participants were classified according to their five-year cardiovascular disease (CVD) risk. Both whole and total nut consumers had significantly lower weight, body mass index (BMI), waist circumference and central adiposity than non-nut consumers (all p ≤ 0.044). Whole blood, serum and red blood cell folate concentrations were significantly higher among whole nut consumers compared to non-whole nut consumers (all p ≤ 0.014), with only serum folate higher in total nut consumers compared to non-total nut consumers (p = 0.023). There were no significant differences for blood pressure, total-C, HDL-C and HbA1c; however, significant negative associations between total nut consumption and CVD risk category (p < 0.001) and CRP (p = 0.045) were apparent. Nut consumption was associated with more favourable body composition and a number of risk factors, which could collectively reduce chronic disease. PMID:26371037

Measurement and analysis of force-time outputs of pyrotechnic nuts

NASA Technical Reports Server (NTRS)

Neubert, V. H.

1973-01-01

The dynamic loadings produced by two standard pyrotechnic nuts were compared with loadings produced by four recently developed low-shock nuts. The nuts were manufactured by separate contractors. Each nut was given a number designation, the number having no special significance. The results show that the use of the Hopkinson bar to measure force-time outputs of the nuts at stud and housing sides aided greatly in understanding the events occurring in the nuts. Acceleration data appear to be dependable, for the most part, but of more limited value. The low-shock designs show considerable improvement over the standard designs above 4,000 Hz when the results are plotted in shock spectrum form. They involve some penalties with regard to weight and cost.

A One-Hand Nut and Bolt Assembly Tool

NASA Technical Reports Server (NTRS)

Spencer, J. M.

1984-01-01

Special wrench speeds nut and bolt assembly when insufficient room to hold nut behind bolthole with standard tool. C-clamp shaped box-andsocket-wrench assembly holds nut on blind side in alinement to receive bolt from open side.

Cultural and historical aspects of Mediterranean nuts with emphasis on their attributed healthy and nutritional properties.

PubMed

Salas-Salvadó, J; Casas-Agustench, P; Salas-Huetos, A

2011-06-01

Nuts have been part of the human diet since prehistoric times. The aim of the present article is to describe the most important historical and cultural aspects of nut consumption throughout history. We discuss the following historical aspects of nuts originating in the Mediterranean: prehistory, the Egyptian civilization, their spread through the Mediterranean region by the Greek, Phoenician and Roman civilizations, and their reintroduction into Europe by means of the Al-Andalus culture. Particular emphasis is placed on the healthy and nutritional attributes that nuts have had throughout history. We also consider the role of the first globalization of food--the exchange of nuts between continents--and discuss the symbolism that nuts have had for humans throughout history in the context of cultural aspects of the Mediterranean region. Nuts and fruits are probably the earliest foods consumed by humans and are considered to be important because of their nutritional properties. Nuts have also been used in the past by different civilizations as drugs to prevent or treat several diseases. Copyright © 2010 Elsevier B.V. All rights reserved.

Connector systems for structures

NASA Technical Reports Server (NTRS)

Lupo, Christian (Inventor); Evenson, Erik (Inventor); Wesselski, Clarence (Inventor)

1993-01-01

A releasable coupling device for connecting two members to one another where a collet type fastener has normally retracted latching fingers insertable into a latching recess and a longitudinally movable expander for activating the fastener is described. The longitudinal movement is retained with a paraffin actuated system which can reset. The longitudinal movement of the expander in one direction is through a one way threaded ratchet system which provides an automatic locking action and the expander is movable in either direction by an independently operated threaded action.

Contribution of Gypsum Wallboard to Racking Resistance of Light-Frame Walls.

DTIC Science & Technology

1983-12-01

contribution to wall ’ ~sheathing to the framing members, and axial loads on racking resistance. Such information may lead to more diagonal braces used...wallboard was centered over the joint and fastened to the narrow face of the wood pieces using 1-1/4-inch drywall nails . Two nails were used to fasten...pulled apart placing a lateral load on the nailed connection, similar to the connector loading incurred at the nailed connection along the bottom plate of

Exploratory Investigation into the Durability of Beneficial Cold Worked Fastener Hole in Aluminum

NASA Technical Reports Server (NTRS)

Johnson, W. S.; Clark, David A.

1999-01-01

Cold working fastener holes in aluminum alloys is a widely used technique in the aerospace industry for improving the fatigue performance of structures. A compressive tangential stress introduced in the material during the cold working of the hole reduces the natural tendency of the material to crack at the holes under cyclic tensile loading. It is a lucrative technique for the aerospace industry in that it provides an increase in performance without any weight cost.

Linear-Elastic 2D and 3D Finite Element Contact Analysis of a Hole Containing a Circular Insert in a Fatigue Test Coupon

DTIC Science & Technology

2015-07-01

circular hole in an aluminium plate fitted with a titanium fastener that were computed using two-dimensional finite element contact analysis. By...used to validate the contact stress distributions associated with a circular hole in an aluminium plate fitted with a titanium fastener that were...fatigue life and aircraft structural integrity management of RAAF airframes. An aluminium coupon has been previously designed in support of the

Static Strength Characteristics of Mechanically Fastened Composite Joints

NASA Technical Reports Server (NTRS)

Fox, D. E.; Swaim, K. W.

1999-01-01

The analysis of mechanically fastened composite joints presents a great challenge to structural analysts because of the large number of parameters that influence strength. These parameters include edge distance, width, bolt diameter, laminate thickness, ply orientation, and bolt torque. The research presented in this report investigates the influence of some of these parameters through testing and analysis. A methodology is presented for estimating the strength of the bolt-hole based on classical lamination theory using the Tsai-Hill failure criteria and typical bolthole bearing analytical methods.

Dropping macadamia nuts-in-shell reduces kernel roasting quality.

PubMed

Walton, David A; Wallace, Helen M

2010-10-01

Macadamia nuts ('nuts-in-shell') are subjected to many impacts from dropping during postharvest handling, resulting in damage to the raw kernel. The effect of dropping on roasted kernel quality is unknown. Macadamia nuts-in-shell were dropped in various combinations of moisture content, number of drops and receiving surface in three experiments. After dropping, samples from each treatment and undropped controls were dry oven-roasted for 20 min at 130 °C, and kernels were assessed for colour, mottled colour and surface damage. Dropping nuts-in-shell onto a bed of nuts-in-shell at 3% moisture content or 20% moisture content increased the percentage of dark roasted kernels. Kernels from nuts dropped first at 20%, then 10% moisture content, onto a metal plate had increased mottled colour. Dropping nuts-in-shell at 3% moisture content onto nuts-in-shell significantly increased surface damage. Similarly, surface damage increased for kernels dropped onto a metal plate at 20%, then at 10% moisture content. Postharvest dropping of macadamia nuts-in-shell causes concealed cellular damage to kernels, the effects not evident until roasting. This damage provides the reagents needed for non-enzymatic browning reactions. Improvements in handling, such as reducing the number of drops and improving handling equipment, will reduce cellular damage and after-roast darkening. Copyright © 2010 Society of Chemical Industry.

Benefits of Nut Consumption on Insulin Resistance and Cardiovascular Risk Factors: Multiple Potential Mechanisms of Actions

PubMed Central

Kim, Yoona; Keogh, Jennifer B.

2017-01-01

Epidemiological and clinical studies have indicated that nut consumption could be a healthy dietary strategy to prevent and treat type 2 diabetes (T2DM) and related cardiovascular disease (CVD). The objective of this review is to examine the potential mechanisms of action of nuts addressing effects on glycemic control, weight management, energy balance, appetite, gut microbiota modification, lipid metabolism, oxidative stress, inflammation, endothelial function and blood pressure with a focus on data from both animal and human studies. The favourable effects of nuts could be explained by the unique nutrient composition and bioactive compounds in nuts. Unsaturated fatty acids (monounsaturated fatty acids and polyunsaturated fatty acids) present in nuts may play a role in glucose control and appetite suppression. Fiber and polyphenols in nuts may also have an anti-diabetic effect by altering gut microbiota. Nuts lower serum cholesterol by reduced cholesterol absorption, inhibition of HMG-CoA reductase and increased bile acid production by stimulation of 7-α hydroxylase. Arginine and magnesium improve inflammation, oxidative stress, endothelial function and blood pressure. In conclusion, nuts contain compounds that favourably influence glucose homeostasis, weight control and vascular health. Further investigations are required to identify the most important mechanisms by which nuts decrease the risk of T2DM and CVD. PMID:29165404

NSD3-NUT fusion oncoprotein in NUT midline carcinoma: implications for a novel oncogenic mechanism.

PubMed

French, Christopher A; Rahman, Shaila; Walsh, Erica M; Kühnle, Simone; Grayson, Adlai R; Lemieux, Madeleine E; Grunfeld, Noam; Rubin, Brian P; Antonescu, Cristina R; Zhang, Songlin; Venkatramani, Rajkumar; Dal Cin, Paola; Howley, Peter M

2014-08-01

NUT midline carcinoma (NMC) is an aggressive subtype of squamous cell carcinoma that typically harbors BRD4/3-NUT fusion oncoproteins that block differentiation and maintain tumor growth. In 20% of cases, NUT is fused to uncharacterized non-BRD gene(s). We established a new patient-derived NMC cell line (1221) and demonstrated that it harbors a novel NSD3-NUT fusion oncogene. We find that NSD3-NUT is both necessary and sufficient for the blockade of differentiation and maintenance of proliferation in NMC cells. NSD3-NUT binds to BRD4, and BRD bromodomain inhibitors induce differentiation and arrest proliferation of 1221 cells. We find further that NSD3 is required for the blockade of differentiation in BRD4-NUT-expressing NMCs. These findings identify NSD3 as a novel critical oncogenic component and potential therapeutic target in NMC. The existence of a family of fusion oncogenes in squamous cell carcinoma is unprecedented, and should lead to key insights into aberrant differentiation in NMC and possibly other squamous cell carcinomas. The involvement of the NSD3 methyltransferase as a component of the NUT fusion protein oncogenic complex identifies a new potential therapeutic target. ©2014 American Association for Cancer Research.

One-step multiplex PCR method for the determination of pecan and Brazil nut allergens in food products.

PubMed

Hubalkova, Zora; Rencova, Eva

2011-10-01

A one-step polymerase chain reaction (PCR) method for the simultaneous detection of the major allergens of pecan and Brazil nuts was developed. Primer pairs for the amplification of partial sequences of genes encoding the allergens were designed and tested for their specificity on a range of food components. The targeted amplicon size was 173 bp of Ber e 1 gene of Brazil nuts and 72 bp of vicilin-like seed storage protein gene in pecan nuts. The primer pair detecting the noncoding region of the chloroplast DNA was used as the internal control of amplification. The intrinsic detection limit of the PCR method was 100 pg mL(-1) pecan or Brazil nuts DNA. The practical detection limit was 0.1% w/w (1 g kg(-1)). The method was applied for the investigation of 63 samples with the declaration of pecans, Brazil nuts, other different nut species or nuts generally. In 15 food samples pecans and Brazil nuts allergens were identified in the conformity with the food declaration. The presented multiplex PCR method is specific enough and can be used as a fast approach for the detection of major allergens of pecan or Brazil nuts in food. Copyright © 2011 Society of Chemical Industry.

Structural analysis of a frangible nut used on the NASA Space Shuttle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metzinger, K.E.

A structural analysis methodology has been developed for the NASA 2.5-inch frangible nut used on the Space Shuttle. Two of these nuts are used to secure the External Tank to the aft end of the Orbiter. Both nuts must completely fracture before the Orbiter can safely separate from the External Tank. Ideally, only one of the two explosive boosters contained in each nut must detonate to completely break a nut. However, after an uncontrolled change in the Inconel 718 material processing, recent tests indicate that in certain circumstances both boosters may be required. This report details the material characterization andmore » subsequent structural analyses of nuts manufactured from two lots of Inconel 718. The nuts from the HSX lot were observed to consistently separate with only one booster, while the nuts from the HBT lot never completely fracture with a single booster. The material characterization requires only tensile test data and the determination of a tearing parameter based on a computer simulation of a tensile test. Subsequent structural analyses using the PRONTO2D finite element code correctly predict the differing response of nuts fabricated from these two lots. This agreement is important because it demonstrates that this technique can be used to screen lots of Inconel 718 before manufacturing frangible nuts from them. To put this new capability to practice, Sandia personnel have transferred this technology to the Pyrotechnics Group at NASA-JSC.« less

Nuts and CVD.

PubMed

Ros, Emilio

2015-04-01

Nuts are nutrient-dense foods with complex matrices rich in unsaturated fatty acids and other bioactive compounds, such as l-arginine, fibre, healthful minerals, vitamin E, phytosterols and polyphenols. By virtue of their unique composition, nuts are likely to beneficially affect cardiovascular health. Epidemiological studies have associated nut consumption with a reduced incidence of CHD in both sexes and of diabetes in women, but not in men. Feeding trials have clearly demonstrated that consumption of all kinds of nuts has a cholesterol-lowering effect, even in the context of healthy diets. There is increasing evidence that nut consumption has a beneficial effect on oxidative stress, inflammation and vascular reactivity. Blood pressure, visceral adiposity and the metabolic syndrome also appear to be positively influenced by nut consumption. Contrary to expectations, epidemiological studies and clinical trials suggest that regular nut consumption is not associated with undue weight gain. Recently, the PREvención con DIeta MEDiterránea randomised clinical trial of long-term nutrition intervention in subjects at high cardiovascular risk provided first-class evidence that regular nut consumption is associated with a 50 % reduction in incident diabetes and, more importantly, a 30 % reduction in CVD. Of note, incident stroke was reduced by nearly 50 % in participants allocated to a Mediterranean diet enriched with a daily serving of mixed nuts (15 g walnuts, 7.5 g almonds and 7.5 g hazelnuts). Thus, it is clear that frequent nut consumption has a beneficial effect on CVD risk that is likely to be mediated by salutary effects on intermediate risk factors.

Nuts, metabolic syndrome and diabetes.

PubMed

Kendall, Cyril W C; Josse, Andrea R; Esfahani, Amin; Jenkins, David J A

2010-08-01

The ability of nuts to improve the blood lipid profile and reduce the risk of CHD is now well established. The interest that health effects of nuts have gained recently has brought the possible benefits of consuming nuts, such as improvement in the conditions of the metabolic syndrome, and their potential to prevent and control diabetes into focus. Results from cohort studies have associated nut consumption with a reduced risk of developing diabetes and CVD. However, few randomised controlled trials have assessed the effect of nuts on diabetes control, and those that have been undertaken have shown improvements in blood lipids but not in the glycaemic control. Diabetes agencies are increasingly recognising the importance of controlling postprandial glycaemia fluctuations. Acute feeding studies indicate that nuts have minimal effects on rising postprandial blood glucose levels when eaten alone, and diminish the postprandial glycaemic response when consumed with high-glycaemic index carbohydrate foods in both normoglycaemic and type 2 diabetic individuals. Nuts have a healthy nutritional profile, high in MUFA and PUFA, are a good source of vegetable protein and are rich in fibre, vitamins and minerals. Incorporation of nuts in the diet may therefore improve the overall nutritional quality of the diet. While more research is required to establish the ability of nuts to improve glycaemic control in the long run, early data indicate that the inclusion of nuts in the diets of individuals with diabetes and the metabolic syndrome is warranted, in view of their potential to reduce CHD risk.

Head and neck squamous cell carcinoma in chronic areca nut chewing Indian women: Case series and review of literature.

PubMed

Muttagi, Sidramesh Shivanand; Chaturvedi, Pankaj; Gaikwad, Rohith; Singh, Bikramjit; Pawar, Prashant

2012-01-01

Head and neck squamous cell carcinoma (HNSCC) is an important public health problem in India. Several risk factors such as tobacco, human papilloma virus, alcohol, areca nut usage have been extensively studied as causative agents. Though Areca nut chewing is known cause of oral cancer, its association with hypopharynx cancer has not been previously reported. Since areca nut is mostly consumed along with tobacco, it is uncommon to find patients who consume the areca nut alone. This is a prospective case series of ten women who presented to us with HNSCC with history of chewing of areca nut alone for several years. We have excluded all those cases where areca nut was consumed along with tobacco in any form. The data were prospectively collected with regard to clinical parameters, duration and frequency of areca nut usage, the socio-economic status and education level. All ten females had varying degree of submucous fibrosis and coexisting squamous cell carcinoma either in the oral cavity or hypopharynx. Submucous fibrosis was characterized by burning mouth, unhealthy oral mucosa, buried third molars, trismus, poor oral hygiene, etc. The disease presented in an advanced stage in majority of the cases. All patients were unaware of areca nut's deleterious effects. Areca nut chewing is an important risk factor for HNSCC in females. Despite plethora of information, little importance is given to areca nut control in cancer prevention campaigns in India.

The role of nuts in the optimal diet: time for a critical appraisal?

PubMed

Russo, P; Siani, A

2012-12-01

During the last decades, nuts have attracted the attention of researchers for their potential benefits in cardiovascular prevention. We discuss here some aspects of the assumed beneficial effects of nuts, weighing them against potential harm. Epidemiological observations and controlled intervention trials consistently suggest that nuts consumption is associated with improved serum lipid profile, thus helping decrease cardiovascular risk. Being nuts an energy dense food, their impact on energy balance and body weight should be considered. In particular, the claim that adding nuts to the habitual diet, thus increasing calorie intake, does not cause body fat accumulation still needs evidence and biological plausibility. The potential risk associated with the relatively frequent occurrence of allergic reactions following the consumption of nuts is also discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Association of tree nut and coconut sensitizations.

PubMed

Polk, Brooke I; Dinakarpandian, Deendayal; Nanda, Maya; Barnes, Charles; Dinakar, Chitra

2016-10-01

Coconut (Cocos nucifera), despite being a drupe, was added to the US Food and Drug Administration list of tree nuts in 2006, causing potential confusion regarding the prevalence of coconut allergy among tree nut allergic patients. To determine whether sensitization to tree nuts is associated with increased odds of coconut sensitization. A single-center retrospective analysis of serum specific IgE levels to coconut, tree nuts (almond, Brazil nut, cashew, chestnut, hazelnut, macadamia, pecan, pistachio, and walnut), and controls (milk and peanut) was performed using deidentified data from January 2000 to August 2012. Spearman correlation (ρ) between coconut and each tree nut was determined, followed by hierarchical clustering. Sensitization was defined as a nut specific IgE level of 0.35 kU/L or higher. Unadjusted and adjusted associations between coconut and tree nut sensitization were tested by logistic regression. Of 298 coconut IgE values, 90 (30%) were considered positive results, with a mean (SD) of 1.70 (8.28) kU/L. Macadamia had the strongest correlation (ρ = 0.77), whereas most other tree nuts had significant (P < .05) but low correlation (ρ < 0.5) with coconut. The adjusted odds ratio between coconut and macadamia was 7.39 (95% confidence interval, 2.60-21.02; P < .001) and 5.32 (95% confidence interval, 2.18-12.95; P < .001) between coconut and almond, with other nuts not being statistically significant. Our findings suggest that although sensitization to most tree nuts appears to correlate with coconut, this is largely explained by sensitization to almond and macadamia. This finding has not previously been reported in the literature. Further study correlating these results with clinical symptoms is planned. Copyright © 2016 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Smart aircraft fastener evaluation (SAFE) system: a condition-based corrosion detection system for aging aircraft

NASA Astrophysics Data System (ADS)

Schoess, Jeffrey N.; Seifert, Greg; Paul, Clare A.

1996-05-01

The smart aircraft fastener evaluation (SAFE) system is an advanced structural health monitoring effort to detect and characterize corrosion in hidden and inaccessible locations of aircraft structures. Hidden corrosion is the number one logistics problem for the U.S. Air Force, with an estimated maintenance cost of $700M per year in 1990 dollars. The SAFE system incorporates a solid-state electrochemical microsensor and smart sensor electronics in the body of a Hi-Lok aircraft fastener to process and autonomously report corrosion status to aircraft maintenance personnel. The long-term payoff for using SAFE technology will be in predictive maintenance for aging aircraft and rotorcraft systems, fugitive emissions applications such as control valves, chemical pipeline vessels, and industrial boilers. Predictive maintenance capability, service, and repair will replace the current practice of scheduled maintenance to substantially reduce operational costs. A summary of the SAFE concept, laboratory test results, and future field test plans is presented.

Mechanical fasteners used in historical Siberian shipbuilding: perspectives for metallurgical analysis

NASA Astrophysics Data System (ADS)

Goncharov, A. E.; Mednikov, D. M.; Karelin, N. M.; Nasyrov, I. R.

2017-10-01

Recent discoveries of shipwrecked vessels in the northern reaches of the river Yenisei led to a number of questions concerning the history of shipbuilding in Siberia and the technical features of the first vessels of the industrial era to navigate the Northern Sea Route and the Yenisei. One of these questions addresses the features of mechanical fasteners used in the construction of the Siberian vessels. The answer to this question may provide information on how the first vessels, constructed in Siberia during the 1870’s, were able to sail the high seas of the Arctic Ocean and reach European ports. In this paper, we provide a description of iron mechanical fasteners obtained from one shipwrecked vessel and discuss on the perspectives of a metallurgical analysis This research has been funded by a grant of the Russian Fund of Humanities Research (Russian Fund of Fundamental Research) and the Krasnoyarsk Regional Science Fund under Grant number 16-11-24010.

Steel bridge in interaction with modern slab track fastening systems under various vertical load levels

NASA Astrophysics Data System (ADS)

Stančík, Vojtěch; Ryjáček, Pavel; Vokáč, Miroslav

2017-09-01

In modern slab tracks the continuously welded rail (CWR) is coupled through the fastening system with the substructure. The resulting restriction of expansion movement causes significant rail stress increments, which in the case of extreme loading may cause rail failures. These interaction phenomenon effects are naturally higher on a bridge due to different deformation capabilities of the bridge and the CWR. The presented contribution aims at investigating the state of the art European direct fastening system that is suitable for application on steel bridges. Analysis involves experimental determination of its nonlinear longitudinal interaction parameters under various vertical loads and numerical validation. During experimental procedures a two and a half meter long laboratory sample equipped with four nodes of the Vossloh DFF 300 was tested. There have been checked both DFF 300 modifications using the skl 15 tension clamps and the low resistance skl B15 tension clamps. The effects of clamping force lowering on the interaction parameters have also been investigated. Results are discussed in the paper.

Experimental Observations for Determining the Maximum Torque Values to Apply to Composite Components Mechanically Joined With Fasteners (MSFC Center Director's Discretionary Fund Final Report, Proj. 03-13}

NASA Technical Reports Server (NTRS)

Thomas, F. P.

2006-01-01

Aerospace structures utilize innovative, lightweight composite materials for exploration activities. These structural components, due to various reasons including size limitations, manufacturing facilities, contractual obligations, or particular design requirements, will have to be joined. The common methodologies for joining composite components are the adhesively bonded and mechanically fastened joints and, in certain instances, both methods are simultaneously incorporated into the design. Guidelines and recommendations exist for engineers to develop design criteria and analyze and test composites. However, there are no guidelines or recommendations based on analysis or test data to specify a torque or torque range to apply to metallic mechanical fasteners used to join composite components. Utilizing the torque tension machine at NASA s Marshall Space Flight Center, an initial series of tests were conducted to determine the maximum torque that could be applied to a composite specimen. Acoustic emissions were used to nondestructively assess the specimens during the tests and thermographic imaging after the tests.

In-service tests of the effectiveness of vibration control measures on the BART rail transit system

NASA Astrophysics Data System (ADS)

Saurenman, Hugh; Phillips, James

2006-06-01

This paper presents results of a number of vibration measurements of the different track forms used on the current San Francisco Bay Area Rapid Transit (BART) system including floating slab, resiliently supported half-ties and high-resilience direct fixation fasteners in subway and one section of floating slab used on at-grade track. The goal was to obtain data that would improve the predictions of future vibration levels and perhaps lead to more cost effective vibration mitigation strategies for the proposed BART extension to San Jose. The tests show that the floating slabs are performing much as designed, the resiliently supported half-ties are less effective than expected, and the high resilience track fasteners are probably performing as expected although the results are clouded because of severe rail corrugation in the area where the new fasteners were installed. One unanticipated result is the apparent interaction of the floating slab resonance, the wheel rotation frequency, the bogie dynamics, and vibration propagation characteristics of the ground.

Areca nut chewing and dependency syndrome: is the dependence comparable to smoking? a cross sectional study.

PubMed

Mirza, Saira S; Shafique, Kashif; Vart, Priya; Arain, Moin I

2011-08-18

Areca nut is the seed of fruit oriental palm known as Areca catechu. Many adverse effects of nut chewing have been well documented in the medical literature. As these nuts are mixed with some other substances like tobacco and flavouring agents, it has been hypothesized that it might also cause some dependency symptoms among its users. Therefore, the objective of this study was to investigate dependency syndrome among areca nut users with and without tobacco additives and compare it with dependency associated with cigarette smoking among the male Pakistani population. This was an observational cross sectional study carried out on healthy individuals, who were users of any one of the three products (areca nut only, areca nut with tobacco additives, cigarette smokers). Participants were selected by convenience sampling of people coming to hospital to seek a free oral check up. Information was collected about the socio-demographic profile, pattern of use and symptoms of dependency using the DSM-IV criteria for substance dependence. We carried out multiple logistic regressions to investigate association between socio-demographic profile, pattern of substance use and dependency syndrome. We carried out final analysis on 851 individuals, of which 36.8% (n = 314) were areca nut users, 28.4% (n = 242) were the chewers of areca with tobacco additives and 34.7% (n = 295) were regular cigarette smokers. Multivariate analyses showed that individuals using areca nut with tobacco additives were significantly more likely to have dependency syndrome (OR = 2.17, 95% CI 1.39-3.40) while cigarette smokers were eight times more likely to have dependency syndrome as compared to areca nut only users. Areca nut use with and without tobacco additives was significantly associated with dependency syndrome. In comparison to exclusive areca nut users, the smokers were eight times more likely to develop dependence while areca nut users with tobacco additives were also significantly more likely to suffer from the dependence.

7 CFR 319.37-7 - Postentry quarantine.

Code of Federal Regulations, 2010 CFR

2010-01-01

... nut articles listed by common name in paragraph (b) of this section All except Canada. Gladiolus spp... longitude. Nut and fruit articles (see fruit and nut articles) Passiflora spp. (passion fruit, granadilla..., France, Italy, Luxembourg, Malta, Mauritius, Portugal, Spain, and Uruguay. (b) Fruit and nut articles...

7 CFR 319.37-7 - Postentry quarantine.

Code of Federal Regulations, 2011 CFR

2011-01-01

... nut articles listed by common name in paragraph (b) of this section All except Canada. Gladiolus spp... longitude. Nut and fruit articles (see fruit and nut articles) Passiflora spp. (passion fruit, granadilla..., France, Italy, Luxembourg, Malta, Mauritius, Portugal, Spain, and Uruguay. (b) Fruit and nut articles...

Should we go nuts about nuts?

PubMed

Rohrmann, Sabine; Faeh, David

2013-07-16

Since the beginning of the 1990s, increasing evidence supports beneficial effects of nut consumption on health. A new analysis of the Spanish PREDIMED trial, published in BMC Medicine, has expanded our knowledge. The study showed that individuals eating nuts more than three times per week died less often from cardiovascular disease and cancer than non-consumers. The study also adds an important finding that previous epidemiological studies could not provide: a protective effect on premature mortality was only seen in the intervention group in which nut consumption increased during the 4.8 years of follow-up, not in the intervention group with additional olive oil consumption or in the control group. Nut consumption actually decreased during follow-up in the latter two groups. Questions remain to be answered on the quantity of nuts to be consumed for health benefits, on possible mechanisms of action, and on whether some types of nuts should be favored.Please see related research: http://www.biomedcentral.com/1741-7015/11/164.

Should we go nuts about nuts?

PubMed Central

2013-01-01

Since the beginning of the 1990s, increasing evidence supports beneficial effects of nut consumption on health. A new analysis of the Spanish PREDIMED trial, published in BMC Medicine, has expanded our knowledge. The study showed that individuals eating nuts more than three times per week died less often from cardiovascular disease and cancer than non-consumers. The study also adds an important finding that previous epidemiological studies could not provide: a protective effect on premature mortality was only seen in the intervention group in which nut consumption increased during the 4.8 years of follow-up, not in the intervention group with additional olive oil consumption or in the control group. Nut consumption actually decreased during follow-up in the latter two groups. Questions remain to be answered on the quantity of nuts to be consumed for health benefits, on possible mechanisms of action, and on whether some types of nuts should be favored. Please see related research: http://www.biomedcentral.com/1741-7015/11/164. PMID:23866107

Characterization of pine nuts in the U.S. market, including those associated with "pine mouth", by GC-FID.

PubMed

Fardin-Kia, Ali Reza; Handy, Sara M; Rader, Jeanne I

2012-03-14

Taste disturbances following consumption of pine nuts, referred to as "pine mouth", have been reported by consumers in the United States and Europe. Nuts of Pinus armandii have been associated with pine mouth, and a diagnostic index (DI) measuring the content of Δ5-unsaturated fatty acids relative to that of their fatty acid precursors has been proposed for identifying nuts from this species. A 100 m SLB-IL 111 GC column was used to improve fatty acid separations, and 45 pine nut samples were analyzed, including pine mouth-associated samples. This study examined the use of a DI for the identification of mixtures of pine nut species and showed the limitation of morphological characteristics for species identification. DI values for many commercial samples did not match those of known reference species, indicating that the majority of pine nuts collected in the U.S. market, including those associated with pine mouth, are mixtures of nuts from different Pinus species.

Areca nut and its role in oral submucous fibrosis.

PubMed

Prabhu, Rachana V; Prabhu, Vishnudas; Chatra, Laxmikanth; Shenai, Prashant; Suvarna, Nithin; Dandekeri, Savita

2014-12-01

Areca nut, commonly called as betel nut or supari, is a fruit of areca catechu palm tree, which is native of South Asia and Pacific Islands. The seed or endosperm is consumed fresh, boiled or after sun drying or curing. Chewing areca nut is thought to have central nervous system stimulating effect and along with this it is known to have salivary stimulating and digestive properties. According to the traditional Ayurvedic medicine, chewing areca nut and betel leaf is a good remedy against halitosis. It is also used for its deworming property. Along with these beneficial effects of areca nut one of its most harmful effects on the human body in general and oral cavity in particular is the development of potentially malignant disorder called Oral Submucous Fibrosis. The present paper discusses in detail the effects of the components of areca nut on pathogenesis of Oral Submucous Fibrosis. Key words:Areca nut, oral submucous fibrosis, potentially malignant disorder, supari.

Betel nut chewing history is an independent prognosticator for smoking patients with locally advanced stage IV head and neck squamous cell carcinoma receiving induction chemotherapy with docetaxel, cisplatin, and fluorouracil.

PubMed

Su, Yan-Ye; Chien, Chih-Yen; Luo, Sheng-Dean; Huang, Tai-Lin; Lin, Wei-Che; Fang, Fu-Min; Chiu, Tai-Jan; Chen, Yen-Hao; Lai, Chi-Chih; Hsu, Cheng-Ming; Li, Shau-Hsuan

2016-03-22

Smoking and betel nut chewing are well-known risk factors for head and neck squamous cell carcinoma (HNSCC). Smoking is also a strong prognosticator for patients with locally advanced HNSCC receiving induction chemotherapy. Smoking with or without betel nut chewing is a common practice in Asia. However, little is known regarding whether betel nut chewing can serve as a prognostic factor for smoking patients with locally advanced HNSCC receiving induction chemotherapy. The aim of this study was to evaluate the prognostic impact of betel nut chewing in such patients receiving induction chemotherapy with docetaxel, cisplatin, and fluorouracil (TPF). From January 2010 to December 2012, we retrospectively analyzed 162 smoking patients with locally advanced HNSCC who received induction chemotherapy with TPF at our institution. Background characteristics, including a history of betel nut chewing, were analyzed as potential prognostic factors. Among the 162 smoking patients, 131 patients (81%) were betel nut chewers, while 31 (19%) were non-betel nut chewers. One hundred fifty-six (96%) were men, and 6 (4%) were women. The median age was 53 years. The overall response rates to induction chemotherapy were 57 and 77% in patients with and without betel nut chewing history, respectively (P = 0.038). The 2-year progression survival rates were 37 and 67% in patients with and without betel nut chewing history, respectively (P = 0.004). The 2-year overall survival rates were 47 and 71% in patients with and without betel nut chewing history, respectively (P = 0.017). Betel nut chewing history was independently associated with a poor response to induction chemotherapy, an inferior progression-free survival rate, and a poor overall survival rate. Our results indicate that betel nut chewing history is independently associated with poor prognosis in smoking patients with locally advanced HNSCC receiving induction chemotherapy with TPF. Further investigation is warranted to explain this effect of betel nut chewing history on these patients' prognosis.

Quick-Connect Nut

NASA Technical Reports Server (NTRS)

1999-01-01

Marshall Space Flight Center (MSFC) has developed a specially-designed nut, called the Quick-Connect Nut, for quick and easy assembly of components in the harsh environment of space, as in assembly of International Space Station. The design permits nuts to be installed simply by pushing them onto standard bolts, then giving a quick twist. To remove, they are unscrewed like conventional nuts. Possible applications include the mining industry for erecting support barriers, assembling underwater oil drilling platforms, fire-fighting equipment, scaffolding, assembly-line machinery, industrial cranes, and even changing lug nuts on race cars. The speed of assembly can make the difference between life and death in different aspects of life on Earth.

Nuclear Protein in Testis Carcinoma of the Thorax.

PubMed

Maruyama, Naomi; Hikiishi, Atsuhito; Suginaka, Miho; Furukawa, Koichi; Ogawa, Koichi; Nakamura, Naoki; Yoshida, Yae; Takata, Munetake; Nishijima, Masayoshi; Otani, Kenichiro; Kamimori, Takao; Fujiwara, Hiroshi; Yoshimatsu, Yuki; Ueda, Kayo

2018-06-06

Nuclear protein in testis (NUT) carcinoma (NUT-C) is an exceedingly rare and aggressive neoplasm. We herein report a case of a 57-year-old man with a rapidly progressing tumor of the thorax and left pleural effusion. The pathological features and immunohistochemical staining of specimens obtained by a transbronchial lung biopsy initially indicated poorly differentiated squamous cell carcinoma. However, given the clinical presentation along with the additional histopathologic features, NUT-C was considered. Immunohistochemical staining for NUT was positive in the pleural fluid cell block, confirming the diagnosis of NUT-C. This report indicates the utility of immunohistochemical staining for diagnosing NUT in the pleural fluid cell block.

Pistachio nut allergy: An updated overview.

PubMed

Costa, Joana; Silva, Isa; Vicente, António A; Oliveira, M Beatriz P P; Mafra, Isabel

2017-09-19

Pistachio nut (Pistacia vera) is highly appreciated for its organoleptic characteristics and potential health benefits. However, this tree nut is also responsible for triggering moderate to severe IgE-mediated reactions in allergic individuals. Currently, pistachio nut allergy has gained some special attention, mainly due to its intrinsic relation with cashew nut allergy. Like for other nuts, the prevalence of pistachio nut allergy seems to be increasing at a global scale. Until now, there are five allergenic proteins officially listed for pistachio nut (Pis v 1, Pis v 2, Pis v 3, Pis v 4 and Pis v 5). Relevant data on their biochemical classification has become available, enabling establishing a correlation with the respective clinical symptoms. The establishment of an effective allergen risk assessment is a key issue for the food industry, policy makers and regulatory agencies. Thus, the availability of fast, specific and sensitive methods to detect trace amounts of allergens in processed foods is crucial. In the specific case of pistachio nut, there are some protein- and DNA-based methods for its detection/quantification in foods, which can aid to verify label information. Accordingly, all relevant research advances on this topic were summarised, updated and critically discussed in this review.

Biomechanical analysis of occupant kinematics in rollover motor vehicle accidents: dynamic spit test.

PubMed

Sances, Anthony; Kumaresan, Srirangam; Clarke, Richard; Herbst, Brian; Meyer, Steve

2005-01-01

A better understanding of occupant kinematics in rollover accidents helps to advance biomechanical knowledge and to enhance the safety features of motor vehicles. While many rollover accident simulation studies have adopted the static approach to delineate the occupant kinematics in rollover accidents, very few studies have attempted the dynamic approach. The present work was designed to study the biomechanics of restrained occupants during rollover accidents using the steady-state dynamic spit test and to address the importance of keeping the lap belt fastened. Experimental tests were conducted using an anthropometric 50% Hybrid III dummy in a vehicle. The vehicle was rotated at 180 degrees/second and the dummy was restrained using a standard three-point restraint system. The lap belt of the dummy was fastened either by using the cinching latch plate or by locking the retractor. Three configurations of shoulder belt harness were simulated: shoulder belt loose on chest with cinch plate, shoulder belt under the left arm and shoulder belt behind the chest. In all tests, the dummy stayed within the confinement of the vehicle indicating that the securely fastened lap belt holds the dummy with dynamic movement of 3 1/2" to 4". The results show that occupant movement in rollover accidents is least affected by various shoulder harness positions with a securely fastened lap belt. The present study forms a first step in delineating the biomechanics of occupants in rollover accidents.

Methodology for Determining Limit Torques for Threaded Fasteners

NASA Technical Reports Server (NTRS)

Hissam, Andy

2011-01-01

In aerospace design, where minimizing weight is always a priority, achieving the full capacity from fasteners is essential. To do so, the initial bolt preload must be maximized. The benefits of high preload are well documented and include improved fatigue resistance, a stiffer joint, and resistance to loosening. But many factors like elastic interactions and embedment tend to lower the initial preload placed on the bolt. These factors provide additional motivation to maximize the initial preload. But, to maximize bolt preload, you must determine what torque to apply. Determining this torque is greatly complicated by the large preload scatter generally seen with torque control. This paper presents a detailed methodology for generating limit torques for threaded fasteners. This methodology accounts for the large scatter in preload found with torque control, and therefore, addresses the statistical nature of the problem. It also addresses prevailing torque, a feature common in aerospace fasteners. Although prevailing torque provides a desired locking feature, it can also increase preload scatter. In addition, it can limit the amount of preload that can be generated due to the torsion it creates in the bolt. This paper discusses the complications of prevailing torque and how best to handle it. A wide range of torque-tension bolt testing was conducted in support of this research. The results from this research will benefit the design engineer as well as analyst involved in the design of bolted joints, leading to better, more optimized structural designs.

7 CFR 457.131 - Macadamia nut crop insurance provisions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Macadamia nut crop insurance provisions. 457.131... INSURANCE CORPORATION, DEPARTMENT OF AGRICULTURE COMMON CROP INSURANCE REGULATIONS § 457.131 Macadamia nut crop insurance provisions. The macadamia nut crop insurance provisions for the 2012 and succeeding crop...

7 CFR 457.131 - Macadamia nut crop insurance provisions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Macadamia nut crop insurance provisions. 457.131... INSURANCE CORPORATION, DEPARTMENT OF AGRICULTURE COMMON CROP INSURANCE REGULATIONS § 457.131 Macadamia nut crop insurance provisions. The macadamia nut crop insurance provisions for the 2012 and succeeding crop...

7 CFR 457.131 - Macadamia nut crop insurance provisions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Macadamia nut crop insurance provisions. 457.131... INSURANCE CORPORATION, DEPARTMENT OF AGRICULTURE COMMON CROP INSURANCE REGULATIONS § 457.131 Macadamia nut crop insurance provisions. The macadamia nut crop insurance provisions for the 2012 and succeeding crop...

Speciation of arsenic in different types of nuts by ion chromatography-inductively coupled plasma mass spectrometry.

PubMed

Kannamkumarath, Sasi S; Wróbel, Kazimierz; Wróbel, Katarzyna; Caruso, Joseph A

2004-03-24

In this work the quantitative determination and analytical speciation of arsenic were undertaken in different types of nuts, randomly purchased from local markets. The hardness of the whole nuts and high lipid content made the preparation of this material difficult for analysis. The lack of sample homogeneity caused irreproducible results. To improve the precision of analysis, arsenic was determined separately in nut oil and in the defatted sample. The lipids were extracted from the ground sample with the two portions of a mixture of chloroform and methanol (2:1). The defatted material was dried and ground again, yielding a fine powder. The nut oil was obtained by combining the two organic extracts and by evaporating the solvents. The two nut fractions were microwave digested, and total arsenic was determined by inductively coupled plasma mass spectrometry (ICP-MS). The results obtained for oils from different types of nuts showed element concentration in the range 2.9-16.9 ng g(-)(1). Lower levels of arsenic were found in defatted material (<0.1 ng g(-)(1) with the exception of Brazil nuts purchased with and without shells, 3.0 and 2.8 ng g(-)(1) respectively). For speciation analysis of arsenic in nut oils, elemental species were extracted from 2 g of oil with 12 mL of chloroform/methanol (2:1) and 8 mL of deionized water. The aqueous layer, containing polar arsenic species, was evaporated and the residue dissolved and analyzed by ion chromatography-ICP-MS. The anion exchange chromatography enabled separation of As(III), dimethylarsinic acid (DMAs(V)), monomethylarsonic acid (MMAs(V)), and As(V) within 8 min. Several types of nuts were analyzed, including walnuts, Brazil nuts, almonds, cashews, pine nuts, peanuts, pistachio nuts, and sunflower seeds. The recovery for the speciation procedure was in the range 72.7-90.6%. The primary species found in the oil extracts were As(III) and As(V). The arsenic concentration levels in these two species were 0.7-12.7 and 0.5-4.3 ng g(-)(1), respectively. The contribution of As in DMAs(V) ranged from 0.1 +/- 0.1 ng g(-)(1) in walnuts to 1.3 +/- 0.3 ng g(-)(1) in pine nuts. MMAs(V) was not detected in almonds, peanuts, pine nuts, sunflower seeds, or walnuts, and the highest concentration was found in pistachio nuts (0.5 +/- 0.2 ng g(-)(1)).

Immunoglobulin E-reactive proteins in cashew (Anacardium occidentale) apple juice concentrate.

PubMed

Comstock, Sarah S; Robotham, Jason M; Tawde, Pallavi; Kshirsagar, Harshal; Sathe, Shridhar K; Roux, Kenneth H; Teuber, Suzanne S

2008-07-23

Cashew apple juice has the potential to be a natural source of vitamin C and sugar in processed foods. The juice of the cashew apple is obtained by pressing the fleshy peduncle or receptacle, which forms a rounded apple that sits above the true fruit, the cashew nut. Cashew nut allergy is the second most commonly reported tree nut allergy in the United States. To determine if cashew apple juice contains cashew nut allergens, immunoblotting was performed using a cashew apple juice 6X concentrate that was extracted and further concentrated through dialysis, lyophilization, and resuspension. Serum IgE of individuals allergic to cashew nut bound proteins in the cashew apple juice concentrate extract. For some serum samples, IgE reactivity could be inhibited by preincubation of the serum with cashew nut extract, suggesting the presence of cashew nut-related allergens. Using monoclonal antibodies specific for cashew nut allergens, the concentrate was found to contain Ana o 1 (vicilin) and Ana o 2 (legumin). Neither IgE from cashew nut allergic sera nor the monoclonal antibodies bound any peptides in 5 kDa filtered cashew apple juice concentrate. The cashew apple juice concentrate used in these studies contains proteins with IgE-reactive epitopes, including cashew nut legumin and vicilin. No IgE-binding peptides remained after 5 kDa filtration of the concentrate.

Effects of tree nuts on blood lipids, apolipoproteins, and blood pressure: systematic review, meta-analysis, and dose-response of 61 controlled intervention trials.

PubMed

Del Gobbo, Liana C; Falk, Michael C; Feldman, Robin; Lewis, Kara; Mozaffarian, Dariush

2015-12-01

The effects of nuts on major cardiovascular disease (CVD) risk factors, including dose-responses and potential heterogeneity by nut type or phytosterol content, are not well established. We examined the effects of tree nuts (walnuts, pistachios, macadamia nuts, pecans, cashews, almonds, hazelnuts, and Brazil nuts) on blood lipids [total cholesterol, low-density lipoprotein (LDL) cholesterol, high-density lipoprotein, and triglycerides], lipoproteins [apolipoprotein A1, apolipoprotein B (ApoB), and apolipoprotein B100], blood pressure, and inflammation (C-reactive protein) in adults aged ≥18 y without prevalent CVD. We conducted a systematic review and meta-analysis following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Two investigators screened 1301 potentially eligible PubMed articles in duplicate. We calculated mean differences between nut intervention and control arms, dose-standardized to one 1-oz (28.4 g) serving/d, by using inverse-variance fixed-effects meta-analysis. Dose-response for nut intake was examined by using linear regression and fractional polynomial modeling. Heterogeneity by age, sex, background diet, baseline risk factors, nut type, disease condition, duration, and quality score was assessed with meta-regression. Publication bias was evaluated by using funnel plots and Egger's and Begg's tests. Sixty-one trials met eligibility criteria (n = 2582). Interventions ranged from 3 to 26 wk. Nut intake (per serving/d) lowered total cholesterol (-4.7 mg/dL; 95% CI: -5.3, -4.0 mg/dL), LDL cholesterol (-4.8 mg/dL; 95% CI: -5.5, -4.2 mg/dL), ApoB (-3.7 mg/dL; 95% CI: -5.2, -2.3 mg/dL), and triglycerides (-2.2 mg/dL; 95% CI: -3.8, -0.5 mg/dL) with no statistically significant effects on other outcomes. The dose-response between nut intake and total cholesterol and LDL cholesterol was nonlinear (P-nonlinearity < 0.001 each); stronger effects were observed for ≥60 g nuts/d. Significant heterogeneity was not observed by nut type or other factors. For ApoB, stronger effects were observed in populations with type 2 diabetes (-11.5 mg/dL; 95% CI: -16.2, -6.8 mg/dL) than in healthy populations (-2.5 mg/dL; 95% CI: -4.7, -0.3 mg/dL) (P-heterogeneity = 0.015). Little evidence of publication bias was found. Tree nut intake lowers total cholesterol, LDL cholesterol, ApoB, and triglycerides. The major determinant of cholesterol lowering appears to be nut dose rather than nut type. Our findings also highlight the need for investigation of possible stronger effects at high nut doses and among diabetic populations. © 2015 American Society for Nutrition.

Areca (Betel) Nut Chewing Practices in Micronesian Populations.

PubMed

Paulino, Yvette C; Novotny, Rachel; Miller, Mary Jane; Murphy, Suzanne P

2011-03-01

To describe the areca nut/betel quid chewing practices of Micronesian chewers living in Guam. Two studies were conducted using qualitative data from focus groups and quantitative cross-sectional data from the 2007 Guam Behavioral Risk Factor Surveillance System (BRFSS). Ten focus groups included 49 men and women aged 18-60 years living in Guam in 2007. Participants were areca nut/betel quid chewers selected to reflect Guam's age and ethnic group (Chamorro, Chuukese, Palauan, and Yapese) distributions. Salient themes were extracted from transcripts of the sessions by three expert reviewers. A second method, latent class analysis, was used to identify unique groups of chewers. The groups were then compared on demographics and chewing-related behaviors. Areca nut and betel quid recipes collected from the focus groups showed that Chamorros had a preference for the ripe nut and swallowed the nut, whereas, the Chuukese, Palauan, and Yapese groups preferred the unripe nut and did not swallow it. Similarly, latent class analysis resulted in the identification of two groups of areca nut/betel quid chewers. Group 1 was all Chamorros. Compared to Group 2, the chewers in Group 1 preferred red and ripe nuts, did not add slake lime (calcium hydroxide) or tobacco, and swallowed the masticated areca nut (with or without Piper betle leaf). The quantitative analysis confirmed the qualitative exploration of areca nut/betel quid chewers in Guam, thus providing evidence that chewing practices vary among Micronesian populations. If future research should include an intervention, the differences in chewing practices among Micronesian populations should be taken into consideration to ensure programmatic success.

Pistachio allergy-prevalence and in vitro cross-reactivity with other nuts.

PubMed

Noorbakhsh, Reihaneh; Mortazavi, Seyed Ali; Sankian, Mojtaba; Shahidi, Fakhri; Tehrani, Mohsen; Azad, Farahzad Jabbari; Behmanesh, Fatemeh; Varasteh, AbdolReza

2011-12-01

Tree nut allergy is characterized by a high frequency of life-threatening reactions and is typically lifelong persistent. Some people with a pistachio nut allergy, which is common in the pistachio rich area of Iran, develop a hypersensitivity to other tree nuts as well. The aim of this study was to investigate the prevalence of pistachio nut allergy in Iran, the major pistachio cultivation region in the world. The study also addressed the presence of allergenic cross-reactivity between pistachio and other nuts, including almond, peanut, and cashew in pistachio allergic patients. A survey was conducted to determine whether the prevalence of pistachio allergy is affected by exposure to this nut in pistachio cultivation regions, as well as possible cross-reactivity between pistachio and other nuts including cashew, almond, and peanut. Inhibition Western blot and inhibition ELISA studies were conducted to assess the presence of allergenic cross-reactivity between pistachio and the other tree nuts. Our results revealed that the prevalence of pistachio allergy is twice as much in pistachio cultivation regions than other areas. Western blotting and inhibition ELISA presented high percentages of inhibition with pistachio and cashew, followed by almond and, to some degree, peanut which indicates different levels of allergenic cross-reactivity. The results indicate that exposure of people to pistachio significantly affects the prevalence of its allergic reactions. In addition, it was observed that, among pistachio allergic subjects, such exposure may affect the co-sensitivities with other nuts, including cashew and almond. The plant taxonomic classification of pistachio and other tree nuts does appear to predict allergenic cross-reactivity.

Areca (Betel) Nut Chewing Practices in Micronesian Populations

PubMed Central

Paulino, Yvette C.; Novotny, Rachel; Miller, Mary Jane; Murphy, Suzanne P.

2014-01-01

Objective To describe the areca nut/betel quid chewing practices of Micronesian chewers living in Guam. Design Two studies were conducted using qualitative data from focus groups and quantitative cross-sectional data from the 2007 Guam Behavioral Risk Factor Surveillance System (BRFSS). Ten focus groups included 49 men and women aged 18–60 years living in Guam in 2007. Participants were areca nut/betel quid chewers selected to reflect Guam's age and ethnic group (Chamorro, Chuukese, Palauan, and Yapese) distributions. Salient themes were extracted from transcripts of the sessions by three expert reviewers. A second method, latent class analysis, was used to identify unique groups of chewers. The groups were then compared on demographics and chewing-related behaviors. Results Areca nut and betel quid recipes collected from the focus groups showed that Chamorros had a preference for the ripe nut and swallowed the nut, whereas, the Chuukese, Palauan, and Yapese groups preferred the unripe nut and did not swallow it. Similarly, latent class analysis resulted in the identification of two groups of areca nut/betel quid chewers. Group 1 was all Chamorros. Compared to Group 2, the chewers in Group 1 preferred red and ripe nuts, did not add slake lime (calcium hydroxide) or tobacco, and swallowed the masticated areca nut (with or without Piper betle leaf). Conclusion The quantitative analysis confirmed the qualitative exploration of areca nut/betel quid chewers in Guam, thus providing evidence that chewing practices vary among Micronesian populations. Implication If future research should include an intervention, the differences in chewing practices among Micronesian populations should be taken into consideration to ensure programmatic success. PMID:25678943

Clinical signs associated with ingestion of black walnut tree (Juglans nigra) wood, nuts, and hulls in dogs: 93 cases (2001-2012).

PubMed

Coleman, Adrienne E; Merola, Valentina

2016-01-15

To identify clinical signs associated with oral exposure to black walnut tree (Juglans nigra) wood, nuts, or nut hulls in dogs and to compare clinical syndromes between dogs that ingested wood and dogs that ingested the walnuts or nut hulls. Retrospective case series. 93 dogs. Records of dogs with oral exposure to black walnut wood, nuts, or nut hulls between November 2001 and December 2012 were retrieved from the Animal Poison Control Center database. Records were reviewed, and data regarding signalment; exposure; time of onset, type, and duration of clinical signs; serum biochemical abnormalities; treatment; and response to treatment were collected. Results were compared statistically between dogs that ingested wood and those that ingested nut components. 28 cases involved exposure to wood, and 65 involved exposure to nuts or hulls. Spontaneous vomiting was commonly observed (13/28 [46%] and 31/65 [48%] dogs that ingested wood and nut components, respectively). Neurologic or musculoskeletal signs were significantly more common in dogs that ingested wood (26/28 [93%]) than in those that ingested nuts or hulls (15/65 [23%]). Relative risk of developing neurologic signs after ingestion of wood was approximately 4 times that after ingestion of nuts or hulls. Ingestion of black walnut wood by dogs resulted in a clinical syndrome in which neurologic or musculoskeletal signs were most frequently reported, whereas ingestion of black walnuts or their hulls was most commonly associated with vomiting. To our knowledge, this is the first report describing 2 different clinical syndromes associated with exposure to black walnut tree components in dogs.

Mechanically fastened composite laminates subjected to combined bearing-bypass and shear loading

NASA Technical Reports Server (NTRS)

Madenci, Erdogan

1993-01-01

Bolts and rivets provide a means of load transfer in the construction of aircraft. However, they give rise to stress concentrations and are often the source and location of static and fatigue failures. Furthermore, fastener holes are prone to cracks during take-off and landing. These cracks present the most common origin of structural failures in aircraft. Therefore, accurate determination of the contact stresses associated with such loaded holes in mechanically fastened joints is essential to reliable strength evaluation and failure prediction. As the laminate is subjected to loading, the contact region, whose extent is not known, develops between the fastener and the hole boundary through this contact region, which consists of slip and no-slip zones due to friction. The presence of the unknown contact stress distribution over the contact region between the pin and the composite laminate, material anisotropy, friction between the pin and the laminate, pin-hole clearance, combined bearing-bypass and shear loading, and finite geometry of the laminate result in a complex non-linear problem. In the case of bearing-bypass loading in compression, this non-linear problem is further complicated by the presence of dual contact regions. Previous research concerning the analysis of mechanical joints subjected to combined bearing-bypass and shear loading is non-existent. In the case of bearing-bypass loading only, except for the study conducted by Naik and Crews (1991), others employed the concept of superposition which is not valid for this non-linear problem. Naik and Crews applied a linear finite element analysis with conditions along the pin-hole contact region specified as displacement constraint equations. The major shortcoming of this method is that the variation of the contract region as a function of the applied load should be known a priori. Also, their analysis is limited to symmetric geometry and material systems, and frictionless boundary conditions. Since the contact stress distribution and the contact region are not known a priori, they did not directly impose the boundary conditions appropriate for modelling the contact and on-contact regions between the fastener and the hole. Furthermore, finite element analysis is not suitable for iterative design calculations for optimizing laminate construction in the presence of fasteners under complex loading conditions. In this study, the solution method developed by Madenci and Ileri (1992a,b) has been extended to determine the contact stresses in mechanical joints under combined bearing-bypass and shear loading, and bearing-bypass loading in compression resulting in dual contact regions.

Floating nut for spacecraft application

NASA Technical Reports Server (NTRS)

Ell, L. J.; Mathewson, R. B.

1978-01-01

Nut overcomes mechanical mismatch from accumulated tolerances and maintains assembly even if mounting screw loosens. Nut and screws can be painted with bonding agent to insure lock. If assemblies are removed frequently, nut and screws can be made of steel to reduce wear and tear on threads and risk of faulty threads.

76 FR 4201 - Common Crop Insurance Regulations, Macadamia Nut Crop Insurance Provisions; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... Insurance Regulations, Macadamia Nut Crop Insurance Provisions; Correction AGENCY: Federal Crop Insurance... pertinent, related to the insurance of macadamia nuts. DATES: Effective Date: January 25, 2011. FOR FURTHER... Nut Crop Insurance Provisions to specify the correct crop year to which it was applicable. It was...

Temporal expression of pecan allergens during nut development

USDA-ARS?s Scientific Manuscript database

Pecan nuts and other tree nuts are among a group of eight foods that most commonly cause food allergy. The growth of pecan nuts is a highly complex process orchestrated by the temporal and spatial expression of specific genes. Three conserved seed-storage proteins from the prolamin and cupin super...

Duplex Wrench

NASA Technical Reports Server (NTRS)

Canada, C. N.

1987-01-01

Special tool enables one worker to do two-worker job. Wrench holds two nuts in place while third nut, coaxial with others, turned. Developed for tightening delicate couplings on gas-supply panel. Single operator restrains coupling pressure cap and connector body nut with one hand. Other hand free to tighten coupling nut with torque wrench.

Development of an ultra-low-shock separation nut

NASA Technical Reports Server (NTRS)

Woebkenberg, W.; Matteo, D. N.; Williams, V. D.

1982-01-01

The technical problems encountered in the development of an advanced separation nut design are described. The nut is capable of sustaining a large preload and releasing that load with a low level of induced pyrotechnic shock, while demonstrating a tolerance for extremely high shock imposed by other pyrotechnic devices. The analysis of the separation nut was performed to acquire additional understanding of the phenomena affecting operation of the nut and to provide quantitative evaluation of design modification for aerospace applications.

Prebiotic nut compounds and human microbiota

PubMed Central

Lamuel-Raventos, Rosa M.; Onge, Marie-Pierre St.

2017-01-01

ABSTRACT Nut consumption is clearly related to human health outcomes. Its beneficial effects have been mainly attributed to nut fatty acid profiles and content of vegetable protein, fiber, vitamins, minerals, phytosterols and phenolics. However, in this review we focus on the prebiotics properties in humans of the non-bioaccessible material of nuts (polymerized polyphenols and polysaccharides), which provides substrates for the human gut microbiota and on the formation of new bioactive metabolites and the absorption of that may partly explain the health benefits of nut consumption. PMID:27224877

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, C.B.

This patent describes a double nut setting tool and liner hanger assembly. It comprises a tool which is releasably coupled to the liner hanger by a nut means threadedly connected to the liner hanger: upon reaching a desired setting location, hanging the liner hanger in the well to support the weight of the liner and to permit rotation of the liner: manipulating the string of pipe to simultaneously rotate the nut means to a released condition relative to the liner hanger while rotating a lock nut in a clutch housing into a locking position in the clutch housing to engagemore » the clutch housing with the liner; and applying weight to the string of pipe to engage the clutch housing with the liner when the coupling nut is released and the lock nut is in a locking position so that the liner can be rotated by rotation of the string of pipe after the coupling nut is released.« less

7 CFR 319.37-7 - Postentry quarantine.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... Euonymus spp. (euonymus) All except Canada, Japan, and Europe. Fruit and nut articles listed by common name... located in part or entirely between 90° and 180° East longitude. Nut and fruit articles (see fruit and nut..., and Uruguay. (b) Fruit and nut articles (common names are listed after scientific names). Achras...

Nutrient composition of raw, dry-roasted, and skin-on cashews

USDA-ARS?s Scientific Manuscript database

Cashew nuts are the second most popular tree nut and sales are growing at a rate of 7% per annum. The highest quality cashew nuts are traditionally whole, oil-roasted, and devoid of skins. The recent development of a technique to remove the caustic cashew nut shell liquid from cashews and leave th...

7 CFR 319.37-7 - Postentry quarantine.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Euonymus spp. (euonymus) All except Canada, Japan, and Europe. Fruit and nut articles listed by common name... located in part or entirely between 90° and 180° East longitude. Nut and fruit articles (see fruit and nut..., and Uruguay. (b) Fruit and nut articles (common names are listed after scientific names). Achras...

7 CFR 319.37-7 - Postentry quarantine.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Euonymus spp. (euonymus) All except Canada, Japan, and Europe. Fruit and nut articles listed by common name... located in part or entirely between 90° and 180° East longitude. Nut and fruit articles (see fruit and nut..., and Uruguay. (b) Fruit and nut articles (common names are listed after scientific names). Achras...

Heat-induced alterations in cashew allergen solubility and IgE binding

USDA-ARS?s Scientific Manuscript database

Cashew nuts are included in a group of 8 foods that commonly cause food allergies. IgE binding to allergens within the nuts can cause allergic reactions that can be severe. Foods containing cashew nuts must be labeled to prevent accidental exposure to people who suffer from allergy to cashew nuts....

Register of new fruit and nut cultivars, list 48: strawberry

USDA-ARS?s Scientific Manuscript database

The Brooks and Olmo Registry of Fruit and Nut Varieties is a compilation of fruit and nut variety descriptions first published in 1952 and cataloging cultivars from 1920 through 1950. A second edition was published in 1972, and a third was published in 1997. Since then, fruit and nut variety descrip...

Register of new fruit and nut cultivars, list 47: Strawberry

USDA-ARS?s Scientific Manuscript database

The Brooks and Olmo Registry of Fruit and Nut Varieties is a compilation of fruit and nut variety descriptions first published in 1952 and cataloging cultivars from 1920 through 1950. A second edition was published in 1972, and a third was published in 1997. Since then, fruit and nut variety descrip...

Register of new fruit and nut cultivars, list 45: Strawberry

USDA-ARS?s Scientific Manuscript database

The Brooks and Olmo Registry of Fruit and Nut Varieties is a compilation of fruit and nut variety descriptions first published in 1952 and cataloging cultivars from 1920 through 1950. A second edition was published in 1972, and a third was published in 1997. Since then, fruit and nut variety descrip...

Register of new fruit and nut cultivars, List 46: Strawberry

USDA-ARS?s Scientific Manuscript database

The Brooks and Olmo Registry of Fruit and Nut Varieties is a compilation of fruit and nut variety descriptions first published in 1952 and cataloging cultivars from 1920 through 1950. A second edition was published in 1972, and a third was published in 1997. Since then, fruit and nut variety descrip...

Investigation of failure to separate an Inconel 718 frangible nut

NASA Technical Reports Server (NTRS)

Hoffman, William C., III; Hohmann, Carl

1994-01-01

The 2.5-inch frangible nut is used in two places to attach the Space Shuttle Orbiter to the External Tank. It must be capable of sustaining structural loads and must also separate into two pieces upon command. Structural load capability is verified by proof loading each flight nut, while ability to separate is verified on a sample of a production lot. Production lots of frangible nuts beginning in 1987 experienced an inability to reliably separate using one of two redundant explosive boosters. The problems were identified in lot acceptance tests, and the cause of failure has been attributed to differences in the response of the Inconel 718. Subsequent tests performed on the frangible nuts resulted in design modifications to the nuts along with redesign of the explosive booster to reliably separate the frangible nut. The problem history along with the design modifications to both the explosive booster and frangible nut are discussed in this paper. Implications of this failure experience impact any pyrotechnic separation system involving fracture of materials with respect to design margin control and lot acceptance testing.

Long-term associations of nut consumption with body weight and obesity1234

PubMed Central

Jackson, Chandra L

2014-01-01

There is some concern that the high-fat, energy-dense content of nuts may promote weight gain. Nuts, however, are rich in protein and dietary fiber, which are associated with increased satiety. They also contain high amounts of vitamins, minerals, antioxidants, and phytoesterols that may confer health benefits for cardiovascular disease and type 2 diabetes delay and prevention. Therefore, it is important to determine the association between nut consumption and long-term weight change and disease risk to reach scientific consensus and to make evidence-based public health recommendations. Several cross-sectional analyses have shown an inverse association between higher nut consumption and lower body weight. In addition, several independent prospective studies found that increasing nut consumption was associated with lower weight gain over relatively long periods of time. Moreover, high consumption of nuts (especially walnuts) has been associated with lower diabetes risk. Therefore, regular consumption (approximately one handful daily) of nuts over the long term, as a replacement to less healthful foods, can be incorporated as a component of a healthy diet for the prevention of obesity and type 2 diabetes. PMID:24898229

Photovoltaic array mounting apparatus, systems, and methods

DOEpatents

West, Jack Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

2015-04-14

A photovoltaic array, including: (a) supports laid out on a surface in rows and columns; (b) photovoltaic modules positioned on top of the supports; and (c) fasteners connecting the photovoltaic modules to the supports, wherein the supports have an upper pedestal surface and a lower pedestal surface such that the photovoltaic modules are positioned at a non-horizontal angle when edges of the photovoltaic modules are positioned on top of the upper and lower pedestal surfaces, and wherein a portion of the fasteners rotate to lock the photovoltaic modules onto the supports.

Photovoltaic array mounting apparatus, systems, and methods

DOEpatents

West, Jack Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

2016-01-05

A photovoltaic array, including: (a) supports laid out on a surface in rows and columns; (b) photovoltaic modules positioned on top of the supports; and (c) fasteners connecting the photovoltaic modules to the supports, wherein the supports have an upper pedestal surface and a lower pedestal surface such that the photovoltaic modules are positioned at a non-horizontal angle when edges of the photovoltaic modules are positioned on top of the upper and lower pedestal surfaces, and wherein a portion of the fasteners rotate to lock the photovoltaic modules onto the supports.

Electromagnetic fasteners

DOEpatents

Crane, Randolph W.; Marts, Donna J.

1994-11-01

An electromagnetic fastener for manipulating objects in space uses the matic attraction of various metals. An end effector is attached to a robotic manipulating system having an electromagnet such that when current is supplied to the electromagnet, the object is drawn and affixed to the end effector, and when the current is withheld, the object is released. The object to be manipulated includes a multiplicity of ferromagnetic patches at various locations to provide multiple areas for the effector on the manipulator to become affixed to the object. The ferromagnetic patches are sized relative to the object's geometry and mass.

Demonstration of Thermoplastic Composite I-Beam Design Bridge at Camp Mackall, NC: Final Report on Projects FY08-16 and FY09-31

DTIC Science & Technology

2017-12-01

fastened to the deck surface, with spaces approximately every 6 ft (1.8 m) to allow water to run off... run the length of the bridge, touching edge to edge. The girders are through bolted to the pile caps. Decking is affixed to the girders with deck...fastened to the deck surface, with spaces approximately every 6 ft (1.8 m) to allow water to run off. ERDC/CERL TR-17-45 49 Figure 43. Holes

Fracture Testing of Integral Stiffened Structure

NASA Technical Reports Server (NTRS)

Newman, John A.; Smith, Stephen W.; Piascik, Robert S.; Dawicke, David S.; Johnston, William M.; Willard, Scott A.

2008-01-01

Laboratory testing was conducted to evaluate safety concerns for integrally-stiffened tanks that were found to have developed cracks during pressurization testing. Cracks occurred at fastener holes where additional stiffeners were attached to the integrally-stiffened tank structure. Tests were conducted to obtain material properties and to reproduce the crack morphologies that were observed in service to help determine if the tanks are safe for operation. Reproducing the cracking modes observed during pressurization testing required a complex loading state involving both a tensile load in the integrally-stiffened structure and a pin-load at a fastener hole.

Evaluation of Aluminum Ion Vapor Deposition as a Replacement for Cadmium Electroplating at Anniston Army Depot.

DTIC Science & Technology

1992-04-01

for cadmium-coated fasteners can be used for aluminum-plated fasteners if the connections are lubricated (cetyl alcohol or molybdenum disulfide are...pressure to a maximum of 9x10 Torr. Argon gas is then introduced to raise the pressure to about 6x10 " Torr (6 gm). A high -voltage discharge is used to...the chamber to provide even distribution of the aluminum. The aluminum vapor is ionized by transfer of a positive charge from the argon ;ons. Alumi

Improved multilayer insulation applications. [spacecraft thermal control

NASA Technical Reports Server (NTRS)

Mikk, G.

1982-01-01

Multilayer insulation blankets used for the attenuation of radiant heat transfer in spacecraft are addressed. Typically, blanket effectiveness is degraded by heat leaks in the joints between adjacent blankets and by heat leaks caused by the blanket fastener system. An approach to blanket design based upon modular sub-blankets with distributed seams and upon an associated fastener system that practically eliminates the through-the-blanket conductive path is described. Test results are discussed providing confirmation of the approach. The specific case of the thermal control system for the optical assembly of the Space Telescope is examined.

Electromagnetic fasteners

DOEpatents

Crane, Randolph W.; Marts, Donna J.

1994-01-01

An electromagnetic fastener for manipulating objects in space uses the matic attraction of various metals. An end effector is attached to a robotic manipulating system having an electromagnet such that when current is supplied to the electromagnet, the object is drawn and affixed to the end effector, and when the current is withheld, the object is released. The object to be manipulated includes a multiplicity of ferromagnetic patches at various locations to provide multiple areas for the effector on the manipulator to become affixed to the object. The ferromagnetic patches are sized relative to the object's geometry and mass.

The mechanism of bolt loading

NASA Technical Reports Server (NTRS)

Lee, H. M.

1992-01-01

It is shown that the mechanism of bolt loading for preloaded fasteners can be effectively portrayed through simple spring models and some algebraic manipulations. Understanding schematically what is involved in such joints provides insight into the distribution of loads. The developed equations confirm that for both symmetric and nonsymmetric joints the loading plane factor and the stiffness factor directly affect the load seen in preloaded fasteners. The manner in which an external loading is transferred through the joint can be explained as energy dissipated in the various springs of both the abutment and the bolt itself.

Fastener apparatus

NASA Technical Reports Server (NTRS)

While, Donald M. (Inventor); Matza, Edward C. (Inventor)

1987-01-01

A fastening apparatus is adapted to be inserted and removed from one side of a work piece having an opposite side which is substantially inaccessible to a worker. A first, externally threaded member is threadingly engaged with a receiving structure, and a second member is inserted within corresponding seats or grooves for interlocking the two members. In the preferred embodiment diverting seats are provided for forming the second member into locking engagement between the receiving structure and the first member. In one embodiment, seat structures are provided for engaging frangible panels or the like for high temperature applications.

Cashew Nut Positioning during Stone Tool Use by Wild Bearded Capuchin Monkeys (Sapajus libidinosus).

PubMed

Falótico, Tiago; Luncz, Lydia V; Svensson, Magdalena S; Haslam, Michael

2016-01-01

Wild capuchin monkeys (Sapajus libidinosus) at Serra da Capivara National Park, Brazil, regularly use stone tools to break open cashew nuts (Anacardium spp.). Here we examine 2 approaches used by the capuchins to position the kidney-shaped cashew nuts on an anvil before striking with a stone tool. Lateral positioning involves placing the nut on its flatter, more stable side, therefore requiring less attention from the monkey during placement. However, the less stable and never previously described arched position, in which the nut is balanced with its curved side uppermost, requires less force to crack the outer shell. We observed cashew nut cracking in a field experimental setting. Only 6 of 20 adults, of both sexes, were observed to deliberately place cashew nuts in an arched position, which may indicate that the technique requires time and experience to learn. We also found that use of the arched position with dry nuts, but not fresh, required, in 63% of the time, an initial processing to remove one of the cashew nut lobes, creating a more stable base for the arch. This relatively rare behaviour appears to have a complex ontogeny, but further studies are required to establish the extent to which social learning is involved. © 2017 S. Karger AG, Basel.

Beliefs, benefits, barriers, attitude, intake and knowledge about peanuts and tree nuts among WIC participants in eastern North Carolina

PubMed Central

Colby, Sarah; Herring, Julia

2009-01-01

The objective of this study was to assess beliefs (e.g. advantages, disadvantages, benefits, barriers) and knowledge about eating peanuts and tree nuts. Personal interviews based on the Theory of Planned Behavior were conducted to elicit beliefs about eating nuts. Then, a cross-sectional survey was administered to WIC participants from one county in North Carolina. One-hundred-twenty-four WIC participants (mean (SD) age=28.39 (8.09) completed the study. Most were Caucasian (51.6%) females (96%). About one third believed that eating nuts may help to lower cholesterol level. However, only about one forth believed that nuts can lower a risk of a heart attack or diabetes. More than one third believed that eating nuts will cause weight gain. The knowledge of respondents' about nutrient content of nuts was low with correct answers to most questions about 20% or below. The mean (SD) positive attitude, negative attitude, benefits and barriers scores, based on a range from 1 to 5, were 2.53 (0.91), 3.25 (0.89), 2.97 (0.85) and 2.90 (0.76), respectively. WIC participants' beliefs regarding the health effects of nuts are inconsistent with the most recent research findings. They are in a need to education about benefits of eating nuts. PMID:20090888

Ten-year review reveals changing trends and severity of allergic reactions to nuts and other foods.

PubMed

Johnson, Jennifer; Malinovschi, Andrei; Alving, Kjell; Lidholm, Jonas; Borres, Magnus P; Nordvall, Lennart

2014-08-01

Over the past few decades, the incidence of food allergies has risen and Sweden has increased its import of peanuts and exotic nuts, such as cashew nuts, which may cause severe allergic reactions. This study aimed to retrospectively investigate paediatric emergency visits due to food reactions over a 10-year period, focusing on reactions to peanuts and tree nuts. Emergency visits to Uppsala University Children's Hospital, Sweden, between September 2001 and December 2010, were reviewed, and cases containing diagnostic codes for anaphylaxis, allergic reactions or allergy and hypersensitivity not caused by drugs or biological substances were retrieved. We analysed 703 emergency visits made by 578 individuals with food allergies. Peanuts and tree nuts accounted for 50% of the food allergies and were more frequently associated with adrenaline treatment and hospitalisation than other foods. Cashew nut reactions increased over the study period, and together with peanuts, they were responsible for more anaphylactic reactions than hazelnuts. Peanut and tree nut reactions were more likely to result in adrenaline treatment and hospitalisation than other food reactions. Peanut and cashew nut reactions were more likely to cause anaphylaxis than hazelnuts. Cashew nut reactions increased during the study period. ©2014 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Synchronized practice helps bearded capuchin monkeys learn to extend attention while learning a tradition

PubMed Central

Eshchar, Yonat; Visalberghi, Elisabetta; Resende, Briseida; Laity, Kellie; Izar, Patrícia

2017-01-01

Culture extends biology in that the setting of development shapes the traditions that individuals learn, and over time, traditions evolve as occasional variations are learned by others. In humans, interactions with others impact the development of cognitive processes, such as sustained attention, that shape how individuals learn as well as what they learn. Thus, learning itself is impacted by culture. Here, we explore how social partners might shape the development of psychological processes impacting learning a tradition. We studied bearded capuchin monkeys learning a traditional tool-using skill, cracking nuts using stone hammers. Young monkeys practice components of cracking nuts with stones for years before achieving proficiency. We examined the time course of young monkeys’ activity with nuts before, during, and following others’ cracking nuts. Results demonstrate that the onset of others’ cracking nuts immediately prompts young monkeys to start handling and percussing nuts, and they continue these activities while others are cracking. When others stop cracking nuts, young monkeys sustain the uncommon actions of percussing and striking nuts for shorter periods than the more common actions of handling nuts. We conclude that nut-cracking by adults can promote the development of sustained attention for the critical but less common actions that young monkeys must practice to learn this traditional skill. This work suggests that in nonhuman species, as in humans, socially specified settings of development impact learning processes as well as learning outcomes. Nonhumans, like humans, may be culturally variable learners. PMID:28739944

Areca nut and tobacco chewing habits in Durban, KwaZulu Natal.

PubMed

Bissessur, S; Naidoo, S

2009-11-01

Areca nut/quid chewing is a habit that is commonly practiced in the Indian subcontinent and this age-old social habit is still being practiced by the Indians in South Africa. The areca nut/quid is prepared in a variety of ways. The quid may be prepared with or without tobacco. This habit is said to be associated with the development of oral submucous fibrosis (OSF), a premalignant lesion, oral leukoplakia and oral cancer. The aim of the present study was to investigate the prevalence of areca nut/quid chewing (with or without tobacco), associated habits (smoking and alcohol consumption) as well as the awareness of the risks. The study was cross-sectional in design and used administered questionnaires and semi-structured interviews to collect the data. A convenience sample of 101 respondents was interviewed. More than three quarter were born in South Africa and the rest were migrant communities from Pakistan, India and Dubai. All respondents from the migrant community were males. Slightly more females than maleschewed areca nut/quid. Popular ingredients that were chewed included areca nut, betel leaf, lime and paan masala. Enjoyment and special functions were the most important reasons for chewing areca nut. Family influence was a reason for chewing. Nearly 60% did not know whether areca nut chewing is harmful to their health. The majority have not attempted to give up the habit. It is recommended that aggressive awareness programmes on the hazardous effects of areca nut/quid chewing be developed similar to those for smoking cessation. Government health warnings need to be written on paan packaging. Taxes need to be imposed on the areca nut and condiments. Age restrictions need to be imposed on purchasing of the areca nut/quid thus making access difficult for the children.

Prevalence of Salmonella in Cashews, Hazelnuts, Macadamia Nuts, Pecans, Pine Nuts, and Walnuts in the United States.

PubMed

Zhang, Guodong; Hu, Lijun; Melka, David; Wang, Hua; Laasri, Anna; Brown, Eric W; Strain, Errol; Allard, Marc; Bunning, Vincent K; Musser, Steven M; Johnson, Rhoma; Santillana Farakos, Sofia; Scott, Virginia N; Pouillot, Régis; Doren, Jane M Van; Hammack, Thomas S

2017-03-01

Nuts have been identified as a vector for salmonellosis. The objective of this project was to estimate the prevalence and contamination level of Salmonella in raw tree nuts (cashews, pecans, hazelnuts, macadamia nuts, pine nuts, and walnuts) at retail markets in the United States. A total of 3,656 samples of six types of tree nuts were collected from different types of retail stores and markets nationwide between October 2014 and October 2015. These samples were analyzed using a modified version of the Salmonella culture method from the U.S. Food and Drug Administration's Bacteriological Analytical Manual. Of the 3,656 samples collected and tested, 32 were culturally confirmed as containing Salmonella. These isolates represented 25 serotypes. Salmonella was not detected in pecans and in-shell hazelnuts. Salmonella prevalence estimates (and 95% confidence intervals) in cashews, shelled hazelnuts, pine nuts, walnuts, and macadamia nuts were 0.55% [0.15, 1.40], 0.35% [0.04, 1.20], 0.48% [0.10, 1.40], 1.20% [0.53, 2.40], and 4.20% [2.40, 6.90], respectively. The rates of Salmonella isolation from major or big chain supermarkets, small chain supermarkets, discount, variety, or drug stores, and online were 0.64% [0.38, 1.00], 1.60% [0.80, 2.90], 0.00% [0.00, 2.40], and 13.64% [2.90, 35.00], respectively (Cochran-Mantel-Haenszel test: P = 0.02). The rates of Salmonella isolation for conventional and organic nuts were not significantly different. Of the samples containing Salmonella, 60.7% had levels less than 0.003 most probable number (MPN)/g. The highest contamination level observed was 0.092 MPN/g. The prevalence and levels of Salmonella in these tree nut samples were comparable to those previously reported for similar foods.

Cross-sensitization profiles of edible nuts in a birch-endemic area.

PubMed

Uotila, R; Kukkonen, A K; Pelkonen, A S; Mäkelä, M J

2016-04-01

Sensitization to birch pollen causes cross-sensitization to nuts, but rarely leads to clinical nut allergy. The aim was to study sensitizations to nuts in individuals sensitized to birch pollen and examine cross-reactivities between birch and nut species. All subjects with skin prick tests (SPTs) for birch pollen conducted during 1997-2013 in the Skin and Allergy Hospital in Helsinki (n = 114 572) and their available SPTs for nuts (n = 50 604) were included. Nut sensitizations were analyzed both with and without cosensitization to birch and stratified into age-categories. Cross-reactivities were analyzed with hierarchical clustering. One group of 1589 patients was surveyed for symptoms. Data were gathered also from Lapland to examine sensitizations in an area with less birch-pollen exposure. Of subjects with birch sensitization, 84% were cosensitized to hazelnut, 71% to almond, and 60% to peanut. In a subgroup without birch sensitization, young children (<5 years) were most commonly nut-sensitized (8-40%); and this prevalence decreased in adolescents and further in adults (4-12%). Cashew and pistachio (ρ = 0.66; P < 0.001) and pecan and walnut (ρ = 0.65; P < 0.001) correlated the strongest. The majority of nut-sensitized patients (71% hazelnut, 83% almond, 73% peanut) reported no or mild symptoms. Cosensitizations between nuts and birch were similar in Lapland with its lower birch-pollen exposure. Birch-sensitized individuals are frequently cosensitized to hazelnut, almond, and peanut. Among the birch-negatives, prevalences of nut sensitizations decrease from early childhood to adolescence. Cashew and pistachio, and pecan and walnut cross-react the most. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Nut-enriched bread is an effective and acceptable vehicle to improve regular nut consumption.

PubMed

Devi, Asika; Chisholm, Alexandra; Gray, Andrew; Tey, Siew Ling; Williamson-Poutama, Destynee; Cameron, Sonya L; Brown, Rachel C

2016-10-01

Consuming 30 g of nuts/day is recommended to reduce chronic disease. However, nut consumption appears far from ideal among several populations. A potential strategy to increase consumption is to add nuts to a staple, for example, bread. Whether the health benefits and acceptability of nuts persist in this form is currently unknown. Thus, we examined the effects of consuming three nut-enriched breads on postprandial glycaemia, satiety, gastrointestinal tolerance, dietary intakes, and acceptance. In this controlled, crossover study, 32 participants were randomly allocated to receive one of four breads for 8 days each. Three breads contained either 30 g of finely sliced hazelnuts, 30 g semi-defatted hazelnut flour, or 15 g of each (amounts per 120 g bread) and were compared with a control nut-free bread. Blood glucose response was measured over 120 min, along with ratings of gastrointestinal discomfort. Appetite ratings and diet diaries were completed during each treatment period. Area under the blood glucose curve was significantly lower for the nut breads compared to the control bread (all P < 0.001), with no significant differences between the nut breads (all P ≥ 0.130). There were no significant differences in satiety (all P ≥ 0.135) or gastrointestinal symptoms (all P ≥ 0.102) between the breads. Acceptance was highest for the finely sliced hazelnut bread. Furthermore, consuming hazelnut-enriched bread improved diet quality, increasing monounsaturated fat, vitamin E, and dietary fibre intakes. Bread appears to be an effective and acceptable vehicle for increasing nut consumption, resulting in improved postprandial glycaemia and diet profiles. Long-term studies are now required.

Use of sulfur and nitrogen stable isotopes to determine the importance of whitebark pine nuts to Yellowstone grizzly bears

USGS Publications Warehouse

Felicetti, L.A.; Schwartz, C.C.; Rye, R.O.; Haroldson, M.A.; Gunther, K.A.; Phillips, D.L.; Robbins, C.T.

2003-01-01

Whitebark pine (Pinus albicaulis) is a masting species that produces relatively large, fat- and protein-rich nuts that are consumed by grizzly bears (Ursus arctos horribilis). Trees produce abundant nut crops in some years and poor crops in other years. Grizzly bear survival in the Greater Yellowstone Ecosystem is strongly linked to variation in pine-nut availability. Because whitebark pine trees are infected with blister rust (Cronartium ribicola), an exotic fungus that has killed the species throughout much of its range in the northern Rocky Mountains, we used stable isotopes to quantify the importance of this food resource to Yellowstone grizzly bears while healthy populations of the trees still exist. Whitebark pine nuts have a sulfur-isotope signature (9.2 ?? 1.3??? (mean ?? 1 SD)) that is distinctly different from those of all other grizzly bear foods (ranging from 1.9 ?? 1.7??? for all other plants to 3.1 ?? 2.6??? for ungulates). Feeding trials with captive grizzly bears were used to develop relationships between dietary sulfur-, carbon-, and nitrogen-isotope signatures and those of bear plasma. The sulfur and nitrogen relationships were used to estimate the importance of pine nuts to free-ranging grizzly bears from blood and hair samples collected between 1994 and 2001. During years of poor pine-nut availability, 72% of the bears made minimal use of pine nuts. During years of abundant cone availability, 8 ?? 10% of the bears made minimal use of pine nuts, while 67 ?? 19% derived over 51% of their assimilated sulfur and nitrogen (i.e., protein) from pine nuts. Pine nuts and meat are two critically important food resources for Yellowstone grizzly bears.

Stereo and scanning electron microscopy of in-shell Brazil nut (Bertholletia excelsa H.B.K.): part two-surface sound nut fungi spoilage susceptibility.

PubMed

Scussel, Vildes M; Manfio, Daniel; Savi, Geovana D; Moecke, Elisa H S

2014-11-01

This work reports the in-shell Brazil nut spoilage susceptible morpho-histological characteristics and fungi infection (shell, edible part, and brown skin) through stereo and scanning electron microscopies (SEM). The following characteristics related to shell (a) morphology-that allow fungi and insects' entrance to inner nut, and (b) histology-that allow humidity absorption, improving environment conditions for living organisms development, were identified. (a.1) locule in testae-the nut navel, which is a cavity formed during nut detaching from pods (located at 1.0 to 2.0/4th of the shell B&C nut faces linkage). It allows the nut brown skin (between shell and edible part) first contact to the external environment, through the (a.2) nut channel-the locule prolongation path, which has the water/nutrients cambium function for their transport and distribution to the inner seed (while still on the tree/pod). Both, locule followed by the channel, are the main natural entrance of living organisms (fungi and insects), including moisture to the inner seed structures. In addition, the (a.3) nut shell surface-which has a crinkled and uneven surface morphology-allows water absorption, thus adding to the deterioration processes too. The main shell histological characteristic, which also allows water absorption (thus improving environment conditions for fungi proliferation), is the (b.1) cell wall porosity-the multilayered wall and porous rich cells that compose the shell faces double tissue layers and the (b.2) soft tissue-the mix of tissues 2 faces corner/linkage. This work also shows in details the SEM nut spoilage susceptible features highly fungi infected with hyphae and reproductive structures distribution. © 2014 Institute of Food Technologists®

Palauans who chew betel nut: social impact of oral disease.

PubMed

Quinn Griffin, M T; Mott, M; Burrell, P M; Fitzpatrick, J J

2014-03-01

Chewing betel nut is a tradition extending from Southeast Asia to the Pacific. Globally, betel nut is the fourth main psychotropic substance containing a stimulant, arecoline, that has a similar effect to nicotine. In Palau, there is broad acceptance of betel nut chewing. One of the largest immigrant groups in Hawaii is the Palauans. Chewing betel nut has significant social implications that make it difficult for those who engage in this practice to separate potential oral disease from the social importance. However, little is known about the social impact of oral disease from chewing betel nut on Palauans in Hawaii. The study aimed to describe the perceptions of betel-chewing Palauans in Hawaii regarding betel nut and to determine the social impact of oral disease among these individuals. Descriptive study conducted on the island of Oahu, Hawaii with 30 adult Palauans. Data were collected using the Oral Health Impact Profile-14 to measure perceptions of social impact of oral disease on well-being. Demographic and general health information was collected. Participants perceived little negative social impact of oral disease on well-being. Families, peers and society exert a strong influence on the decision to chew betel nut, a known carcinogen. Participants in this study showed little concern on the impact of betel nut chewing on their oral health. They continue the habit in spite of the awareness of potential for oral disease. Nurses face challenges in educating Palauans about the negative aspects of betel nut, particularly those related to oral health especially when they do not perceive problems. Nurses must be involved in the development of health policies to design and implement strategies to promote behavioural change, and to ensure clinical services that are culturally sensitive to betel nut chewers. © 2014 International Council of Nurses.

Dietary management of peanut and tree nut allergy: what exactly should patients avoid?

PubMed

Brough, H A; Turner, P J; Wright, T; Fox, A T; Taylor, S L; Warner, J O; Lack, G

2015-05-01

Peanut and tree nut allergies are the commonest cause of life-threatening food-allergic reactions and significantly affect quality of life in children and their families. Dietary nut avoidance and provision of emergency medication is currently the mainstay of treatment. Nut avoidance has consequences on both quality of life and nutrition. We review the terminology that may cause confusion and lead to unnecessary dietary restrictions. In peanut or tree nut-allergic children, introduction of specific nuts to which the child is not allergic may improve quality of life and should be considered in patients with multiple foods allergies, vegan or ethnic-specific diets, in whom nuts are an important source of protein. Nut-allergic consumers do not just need to avoid foods containing nuts as an ingredient, but also contend with pre-packed foods which frequently have precautionary allergen labelling (PAL) referring to possible nut contamination. Although the published rate of peanut contamination in 'snack' foods with PAL (see Box ) ranges from 0.9-32.4%, peanut contamination in non-snack items with PAL is far less common. We propose that in some peanut-allergic patients (depending on history of reactivity to trace levels of peanut, reaction severity, other medical conditions, willingness to always carry adrenaline, etc.), consideration may be given to allow the consumption of non-snack foods containing PAL following discussion with the patient's (and their family's) specialist. More work is needed to provide consumers with clearer information on the risk of potential nut contamination in pre-packed food. We also draw attention to the change in legislation in December 2014 that require mandatory disclosure of allergens in non-pre-packed foods. © 2014 The Authors. Clinical & Experimental Allergy Published by John Wiley & Sons Ltd.

Multicentre Double-Blind Placebo-Controlled Food Challenge Study in Children Sensitised to Cashew Nut.

PubMed

van der Valk, Johanna P M; Gerth van Wijk, Roy; Dubois, Anthony E J; de Groot, Hans; Reitsma, Marit; Vlieg-Boerstra, Berber; Savelkoul, Huub F J; Wichers, Harry J; de Jong, Nicolette W

2016-01-01

Few studies with a limited number of patients have provided indications that cashew-allergic patients may experience severe allergic reactions to minimal amounts of cashew nut. The objectives of this multicentre study were to assess the clinical relevance of cashew nut sensitisation, to study the clinical reaction patterns in double-blind placebo-controlled food challenge tests and to establish the amount of cashew nuts that can elicit an allergic reaction. A total of 179 children were included (median age 9.0 years; range 2-17 years) with cashew nut sensitisation and a clinical history of reactions to cashew nuts or unknown exposure. Sensitised children who could tolerate cashew nuts were excluded. The study included three clinical visits and a telephone consultation. During the first visit, the medical history was evaluated, physical examinations were conducted, blood samples were drawn and skin prick tests were performed. The children underwent a double-blind placebo-controlled food challenge test with cashew nut during the second and third visits. The study showed that 137 (76.5%) of the sensitised children suspected of allergy to cashew nut had a positive double-blind placebo-controlled food challenge test, with 46% (63) manifesting subjective symptoms to the lowest dose of 1 mg cashew nut protein and 11% (15) developing objective symptoms to the lowest dose. Children most frequently had gastro-intestinal symptoms, followed by oral allergy and skin symptoms. A total of 36% (49/137) of the children experienced an anaphylactic reaction and 6% (8/137) of the children were treated with epinephrine. This prospective study demonstrated a strikingly high percentage of clinical reactions to cashew nut in this third line population. Severe allergic reactions, including anaphylaxis requiring epinephrine, were observed. These reactions were to minimal amounts of cashew nut, demonstrated the high potency of this allergens. www.ncbi.nlm.nih.gov/pubmed NTR3572.

Multicentre Double-Blind Placebo-Controlled Food Challenge Study in Children Sensitised to Cashew Nut

PubMed Central

van der Valk, Johanna P. M.; Gerth van Wijk, Roy; Dubois, Anthony E. J.; de Groot, Hans; Reitsma, Marit; Vlieg-Boerstra, Berber; Savelkoul, Huub F. J.; Wichers, Harry J.; de Jong, Nicolette W.

2016-01-01

Background Few studies with a limited number of patients have provided indications that cashew-allergic patients may experience severe allergic reactions to minimal amounts of cashew nut. The objectives of this multicentre study were to assess the clinical relevance of cashew nut sensitisation, to study the clinical reaction patterns in double-blind placebo-controlled food challenge tests and to establish the amount of cashew nuts that can elicit an allergic reaction. Methods and Findings A total of 179 children were included (median age 9.0 years; range 2–17 years) with cashew nut sensitisation and a clinical history of reactions to cashew nuts or unknown exposure. Sensitised children who could tolerate cashew nuts were excluded. The study included three clinical visits and a telephone consultation. During the first visit, the medical history was evaluated, physical examinations were conducted, blood samples were drawn and skin prick tests were performed. The children underwent a double-blind placebo-controlled food challenge test with cashew nut during the second and third visits. The study showed that 137 (76.5%) of the sensitised children suspected of allergy to cashew nut had a positive double-blind placebo-controlled food challenge test, with 46% (63) manifesting subjective symptoms to the lowest dose of 1 mg cashew nut protein and 11% (15) developing objective symptoms to the lowest dose. Children most frequently had gastro-intestinal symptoms, followed by oral allergy and skin symptoms. A total of 36% (49/137) of the children experienced an anaphylactic reaction and 6% (8/137) of the children were treated with epinephrine. Conclusion This prospective study demonstrated a strikingly high percentage of clinical reactions to cashew nut in this third line population. Severe allergic reactions, including anaphylaxis requiring epinephrine, were observed. These reactions were to minimal amounts of cashew nut, demonstrated the high potency of this allergens. Trial Registration www.ncbi.nlm.nih.gov/pubmed NTR3572 PMID:26967158

Nut consumption and total and cause-specific mortality: results from the Golestan Cohort Study

PubMed Central

Eslamparast, Tannaz; Sharafkhah, Maryam; Poustchi, Hossein; Hashemian, Maryam; Dawsey, Sanford M; Freedman, Neal D; Boffetta, Paolo; Abnet, Christian C; Etemadi, Arash; Pourshams, Akram; Malekshah, Akbar Fazeltabar; Islami, Farhad; Kamangar, Farin; Merat, Shahin; Brennan, Paul; Hekmatdoost, Azita; Malekzadeh, Reza

2017-01-01

Abstract Background: A number of prospective studies have observed inverse associations between nut consumption and chronic diseases. However, these studies have predominantly been conducted in Western countries, where nut consumption tends to be more common among individuals with healthier lifestyles. It is important to examine the association in other parts of the world, and particularly among populations with different patterns of disease, socioeconomic status, lifestyles and disease risk factors. Our objective was to examine the association between nut consumption and mortality in a population whose nut consumption does not track with a healthy lifestyle. Methods: We examined the association between nut consumption and all-cause and cause-specific mortality in the 50 045 participants of the Golestan Cohort Study. Participants were aged 40 and older at baseline in 2004, and have been actively followed since that time. Dietary data were collected using a validated semi-quantitative food frequency questionnaire that was administered at baseline. Results: During 349 677 person-years of follow-up, 3981 cohort participants died, including 1732 women and 2249 men. Nut consumption was associated inversely with all-cause mortality. The pooled multivariate adjusted hazard ratios for death among participants who ate nuts, as compared with those who did not, were 0.89 [95% confidence interval (CI), 0.82-0.95] for the consumption of less than one serving of nuts per week, 0.75 (95% CI, 0.67-0.85) for one to less than three servings per week and 0.71 (95% CI, 0.58-0.86) for three or more servings per week (P < 0.001 for trend). Among specific causes, significant inverse associations were observed between nut consumption and deaths due to cardiovascular disease, all cancers and gastrointestinal cancers. Conclusions: This study provides evidence for an inverse association between nut consumption and mortality in a developing country, where nut consumption does not track with a healthy lifestyle. Further work is needed to establish the underlying mechanisms responsible for this association. PMID:26946539

Frequency of nut consumption and mortality risk in the PREDIMED nutrition intervention trial

PubMed Central

2013-01-01

Background Prospective studies in non-Mediterranean populations have consistently related increasing nut consumption to lower coronary heart disease mortality. A small protective effect on all-cause and cancer mortality has also been suggested. To examine the association between frequency of nut consumption and mortality in individuals at high cardiovascular risk from Spain, a Mediterranean country with a relatively high average nut intake per person. Methods We evaluated 7,216 men and women aged 55 to 80 years randomized to 1 of 3 interventions (Mediterranean diets supplemented with nuts or olive oil and control diet) in the PREDIMED (‘PREvención con DIeta MEDiterránea’) study. Nut consumption was assessed at baseline and mortality was ascertained by medical records and linkage to the National Death Index. Multivariable-adjusted Cox regression and multivariable analyses with generalized estimating equation models were used to assess the association between yearly repeated measurements of nut consumption and mortality. Results During a median follow-up of 4.8 years, 323 total deaths, 81 cardiovascular deaths and 130 cancer deaths occurred. Nut consumption was associated with a significantly reduced risk of all-cause mortality (P for trend <0.05, all). Compared to non-consumers, subjects consuming nuts >3 servings/week (32% of the cohort) had a 39% lower mortality risk (hazard ratio (HR) 0.61; 95% CI 0.45 to 0.83). A similar protective effect against cardiovascular and cancer mortality was observed. Participants allocated to the Mediterranean diet with nuts group who consumed nuts >3 servings/week at baseline had the lowest total mortality risk (HR 0.37; 95% CI 0.22 to 0.66). Conclusions Increased frequency of nut consumption was associated with a significantly reduced risk of mortality in a Mediterranean population at high cardiovascular risk. Please see related commentary: http://www.biomedcentral.com/1741-7015/11/165. Trial registration Clinicaltrials.gov. International Standard Randomized Controlled Trial Number (ISRCTN): 35739639. Registration date: 5 October 2005. PMID:23866098

Hydraulic Apparatus for Mechanical Testing of Nuts

NASA Technical Reports Server (NTRS)

Hinkel, Todd J.; Dean, Richard J.; Hacker, Scott C.; Harrington, Douglas W.; Salazar, Frank

2004-01-01

The figure depicts an apparatus for mechanical testing of nuts. In the original application for which the apparatus was developed, the nuts are of a frangible type designed for use with pyrotechnic devices in spacecraft applications in which there are requirements for rapid, one-time separations of structures that are bolted together. The apparatus can also be used to test nonfrangible nuts engaged without pyrotechnic devices. This apparatus was developed to replace prior testing systems that were extremely heavy and immobile and characterized by long setup times (of the order of an hour for each nut to be tested). This apparatus is mobile, and the setup for each test can now be completed in about five minutes. The apparatus can load a nut under test with a static axial force of as much as 6.8 x 10(exp 5) lb (3.0 MN) and a static moment of as much as 8.5 x 10(exp 4) lb in. (9.6 x 10(exp 3) N(raised dot)m) for a predetermined amount of time. In the case of a test of a frangible nut, the pyrotechnic devices can be exploded to break the nut while the load is applied, in which case the breakage of the nut relieves the load. The apparatus can be operated remotely for safety during an explosive test. The load-generating portion of the apparatus is driven by low-pressure compressed air; the remainder of the apparatus is driven by 110-Vac electricity. From its source, the compressed air is fed to the apparatus through a regulator and a manually operated valve. The regulated compressed air is fed to a pneumatically driven hydraulic pump, which pressurizes oil in a hydraulic cylinder, thereby causing a load to be applied via a hydraulic nut (not to be confused with the nut under test). During operation, the hydraulic pressure is correlated with the applied axial load, which is verified by use of a load cell. Prior to operation, one end of a test stud (which could be an ordinary threaded rod or bolt) is installed in the hydraulic nut. The other end of the test stud passes through a bearing plate; a load cell is slid onto that end, and then the nut to be tested is threaded onto that end and tightened until the nut and load cell press gently against the bearing plate.

Effects of tree nuts on blood lipids, apolipoproteins, and blood pressure: systematic review, meta-analysis, and dose-response of 61 controlled intervention trials123

PubMed Central

Del Gobbo, Liana C; Falk, Michael C; Feldman, Robin; Lewis, Kara; Mozaffarian, Dariush

2015-01-01

Background: The effects of nuts on major cardiovascular disease (CVD) risk factors, including dose-responses and potential heterogeneity by nut type or phytosterol content, are not well established. Objectives: We examined the effects of tree nuts (walnuts, pistachios, macadamia nuts, pecans, cashews, almonds, hazelnuts, and Brazil nuts) on blood lipids [total cholesterol, low-density lipoprotein (LDL) cholesterol, high-density lipoprotein, and triglycerides], lipoproteins [apolipoprotein A1, apolipoprotein B (ApoB), and apolipoprotein B100], blood pressure, and inflammation (C-reactive protein) in adults aged ≥18 y without prevalent CVD. Design: We conducted a systematic review and meta-analysis following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Two investigators screened 1301 potentially eligible PubMed articles in duplicate. We calculated mean differences between nut intervention and control arms, dose-standardized to one 1-oz (28.4 g) serving/d, by using inverse-variance fixed-effects meta-analysis. Dose-response for nut intake was examined by using linear regression and fractional polynomial modeling. Heterogeneity by age, sex, background diet, baseline risk factors, nut type, disease condition, duration, and quality score was assessed with meta-regression. Publication bias was evaluated by using funnel plots and Egger’s and Begg’s tests. Results: Sixty-one trials met eligibility criteria (n = 2582). Interventions ranged from 3 to 26 wk. Nut intake (per serving/d) lowered total cholesterol (−4.7 mg/dL; 95% CI: −5.3, −4.0 mg/dL), LDL cholesterol (−4.8 mg/dL; 95% CI: −5.5, −4.2 mg/dL), ApoB (−3.7 mg/dL; 95% CI: −5.2, −2.3 mg/dL), and triglycerides (−2.2 mg/dL; 95% CI: −3.8, −0.5 mg/dL) with no statistically significant effects on other outcomes. The dose-response between nut intake and total cholesterol and LDL cholesterol was nonlinear (P-nonlinearity < 0.001 each); stronger effects were observed for ≥60 g nuts/d. Significant heterogeneity was not observed by nut type or other factors. For ApoB, stronger effects were observed in populations with type 2 diabetes (−11.5 mg/dL; 95% CI: −16.2, −6.8 mg/dL) than in healthy populations (−2.5 mg/dL; 95% CI: −4.7, −0.3 mg/dL) (P-heterogeneity = 0.015). Little evidence of publication bias was found. Conclusions: Tree nut intake lowers total cholesterol, LDL cholesterol, ApoB, and triglycerides. The major determinant of cholesterol lowering appears to be nut dose rather than nut type. Our findings also highlight the need for investigation of possible stronger effects at high nut doses and among diabetic populations. PMID:26561616

78 FR 61365 - Assessment of the Risk of Human Salmonellosis Associated With the Consumption of Tree Nuts...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-03

...] Assessment of the Risk of Human Salmonellosis Associated With the Consumption of Tree Nuts; Request for... Salmonellosis Associated With the Consumption of Tree Nuts; Request for Comments, Scientific Data and... associated with the consumption of tree nuts. We are taking this action in response to requests for an...

Alternate alloys for UF/sub 6/ cylinder valve packing nuts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blue, S.C.

One-inch cylinder valve packing nuts made from aluminum bronze alloy C63600 are susceptible to stress corrosion cracking. The use of alloys which are more resistant to cracking should eliminate the occasional nut failures. It is proposed that packing nuts be produced from either aluminum bronze C61300 or Monel (NO4400). 2 refs., 4 tabs.

Nut consumption is associated with decreased health risk factors for cardiovascular disease and metabolic syndrome in US adults: NHANES 1999-2004

USDA-ARS?s Scientific Manuscript database

Few recent epidemiologic studies have assessed the effect that nut consumption (including tree nuts and peanuts) has on health risks, including metabolic syndrome. This study compared the health risk for cardiovascular disease, type 2 diabetes, and metabolic syndrome of nut consumers with that of no...

Prediction and identification of Korean Pine (Pinus koraiensis) vicilin as a food allergen (abstract)

USDA-ARS?s Scientific Manuscript database

RATIONALE: Pine nut allergy cases have been reported, but pine nut allergens remain to be identified and characterized. Korean pine nut is one of the major varieties of pine nuts that are widely consumed. Vicilins belong to one of a few protein families that contain more than 85% of the known food a...

Lead screw linear actuator

NASA Technical Reports Server (NTRS)

Perkins, Gerald S. (Inventor)

1980-01-01

A linear actuator which can apply high forces is described, which includes a reciprocating rod having a threaded portion engaged by a nut that is directly coupled to the rotor of an electric motor. The nut is connected to the rotor in a manner that minimizes loading on the rotor, by the use of a coupling that transmits torque to the nut but permits it to shift axially and radially with respect to the rotor. The nut has a threaded hydrostatic bearing for engaging the threaded rod portion, with an oilcarrying groove in the nut being interrupted.

Oral submucous fibrosis at pediatric age, now time to think: Series of two cases

PubMed Central

Gupta, Vinay K.; Malhotra, Seema; Patil, Ranjit; Tripathi, Anurag

2013-01-01

The younger generation is consuming areca nut and areca nut products, which is coming in the market with different multicolored attractive pouches and easily available in each and every corner of the road. For the children from the lower socioeconomic strata, areca nut use is rampant. Alarmingly, it has been seen that the highest period of risk for engaging in areca nut alone is between the ages of 5 and 12. Oral submucous fibrosis associated with areca nut in children is a great concern for the Society and the Government. Factors associated with this report for consuming areca nut are levels of awareness, household environment, peer pressure, low cost, easy availability etc. PMID:24049299

Repulsive Effect for Unbound High Energy Particles Along Rotation Axis in Kerr-Taub-NUT Spacetime

NASA Astrophysics Data System (ADS)

Zhang, Lu; Chen, Song-Bai

2018-04-01

We have investigated the acceleration of the unbound high energy particles moving along the rotation axis in the Kerr-Taub-NUT spacetime, and then study the dependence of the repulsive effects on the NUT charge for the particles in the spacetime. Whether the repulsive effects with the NUT charge become stronger depends on the Carter constant, the position and velocity of the particles themselves. We also present numerically the changes of the observable velocity and acceleration with the NUT charge for the unbound particles in the Kerr-Taub-NUT spacetime. Supported by the Scientific Research Fund of Hunan Provincial Education Department under Grant No. 17A124, and the Construct Program of Key Disciplines in Hunan Province

Heat Loads Due to Small Penetrations in Multilayer Insulation Blankets

NASA Technical Reports Server (NTRS)

Johnson, W. L.; Heckle, K. W.; Fesmire, J. E.

2017-01-01

The main penetrations (supports and piping) through multilayer insulation systems for cryogenic tanks have been previously addressed by heat flow measurements. Smaller penetrations due to fasteners and attachments are now experimentally investigated. The use of small pins or plastic garment tag fasteners to each the handling and construction of multilayer insulation (MLI) blankets goes back many years. While it has long been understood that penetrations and other discontinuities degrade the performance of the MLI blanket, quantification of this degradation has generally been lumped into gross performance multipliers (often called degradation factors or scale factors). Small penetrations contribute both solid conduction and radiation heat transfer paths through the blanket. The conduction is down the stem of the structural element itself while the radiation is through the hole formed during installation of the pin or fastener. Analytical models were developed in conjunction with MLI perforation theory and Fouriers Law. Results of the analytical models are compared to experimental testing performed on a 10 layer MLI blanket with approximately 50 small plastic pins penetrating the test specimen. The pins were installed at 76-mm spacing inches in both directions to minimize the compounding of thermal effects due to localized compression or lateral heat transfer. The testing was performed using a liquid nitrogen boil-off calorimeter (Cryostat-100) with the standard boundary temperatures of 293 K and 78 K. Results show that the added radiation through the holes is much more significant than the conduction down the fastener. The results are shown to be in agreement with radiation theory for perforated films.