Sample records for objective quality control

  1. Principles and Practices for Quality Assurance and Quality Control

    USGS Publications Warehouse

    Jones, Berwyn E.

    1999-01-01

    Quality assurance and quality control are vital parts of highway runoff water-quality monitoring projects. To be effective, project quality assurance must address all aspects of the project, including project management responsibilities and resources, data quality objectives, sampling and analysis plans, data-collection protocols, data quality-control plans, data-assessment procedures and requirements, and project outputs. Quality control ensures that the data quality objectives are achieved as planned. The historical development and current state of the art of quality assurance and quality control concepts described in this report can be applied to evaluation of data from prior projects.

  2. Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York-July 1997 through June 1999

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2006-01-01

    The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance/quality-control data for the time period addressed in this report were stored in the laboratory's SAS data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality- control samples analyzed from July 1997 through June 1999. Results for the quality-control samples for 18 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration and (or) low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, total aluminum, ammonium, calcium, chloride, specific conductance, and sulfate. The data from the potassium and sodium analytical procedures are insufficient for evaluation. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 11 of 13 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. Blank analysis results for chloride showed that 22 percent of blanks did not meet data-quality objectives and results for dissolved organic carbon showed that 31 percent of the blanks did not meet data-quality objectives. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 14 of the 18 analytes. At least 90 percent of the samples met data-quality objectives for all analytes except total aluminum (70 percent of samples met objectives) and potassium (83 percent of samples met objectives). Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality for most constituents over the time period. The P-sample (low-ionic-strength constituents) analysis had good ratings in two of these studies and a satisfactory rating in the third. The results of the T-sample (trace constituents) analysis indicated high data quality with good ratings in all three studies. The N-sample (nutrient constituents) studies had one each of excellent, good, and satisfactory ratings. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 80 percent of the samples met data-quality objectives for 9 of the 13 analytes; the exceptions were dissolved organic carbon, ammonium, chloride, and specific conductance. Data-quality objectives were not met for dissolved organic carbon in two NWRI studies, but all of the samples were within control limits for the last study. Data-quality objectives were not met in 41 percent of samples analyzed for ammonium, 25 percent of samples analyzed for chloride, and 30 percent of samples analyzed for specific conductance. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 84 percent of the samples analyzed for calcium, chloride, magnesium, pH, and potassium. Data-quality objectives were met by 73 percent of those analyzed for sulfate. The data-quality objective was not met for sodium. The data are insufficient for evaluation of the specific conductance results.

  3. Quality-assurance data for routine water analyses by the U.S. Geological Survey laboratory in Troy, New York - July 2003 through June 2005

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2009-01-01

    The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2003 through June 2005. Results for the quality-control samples for 20 analytical procedures were evaluated for bias and precision. Control charts indicate that data for five of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, pH, silicon, and sodium. Seven of the analytical procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits; these procedures were: dissolved organic carbon, chloride, nitrate (ion chromatograph), nitrite, silicon, sodium, and sulfate. The calcium and magnesium procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The total aluminum and specific conductance procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 17 of 18 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 22 analytes. At least 85 percent of the samples met data-quality objectives for all analytes except total monomeric aluminum (82 percent of samples met objectives), total aluminum (77 percent of samples met objectives), chloride (80 percent of samples met objectives), fluoride (76 percent of samples met objectives), and nitrate (ion chromatograph) (79 percent of samples met objectives). The ammonium and total dissolved nitrogen did not meet the data-quality objectives. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality over the time period, with ratings for each sample in the satisfactory, good, and excellent ranges or less than 10 percent error. The P-sample (low-ionic-strength constituents) analysis had one marginal and two unsatisfactory ratings for the chloride procedure. The T-sample (trace constituents)analysis had two unsatisfactory ratings and one high range percent error for the aluminum procedure. The N-sample (nutrient constituents) analysis had one marginal rating for the nitrate procedure. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 84 percent of the samples met data-quality objectives for 11 of the 14 analytes; the exceptions were ammonium, total aluminum, and acid-neutralizing capacity. The ammonium procedure did not meet data quality objectives in all studies. Data-quality objectives were not met in 23 percent of samples analyzed for total aluminum and 45 percent of samples analyzed acid-neutralizing capacity. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 86 percent of the samples analyzed for calcium, chloride, fluoride, magnesium, pH, potassium, sodium, and sulfate. Data-quality objectives were not met by samples analyzed for fluoride. 

  4. Quality-assurance data for routine water quality analyses by the U. S. Geological Survey laboratory in Troy, New York; July 1993 through June 1995

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2001-01-01

    A laboratory for analysis of low-ionic strength water has been developed at the U.S. Geological Survey (USGS) office in Troy, N.Y., to analyze samples collected by USGS projects in the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures developed to ensure proper sample collection, processing, and analysis. The quality-assurance/quality-control data are stored in the laboratory's SAS data-management system, which provides efficient review, compilation, and plotting of quality-assurance/quality-control data. This report presents and discusses samples analyzed from July 1993 through June 1995. Quality-control results for 18 analytical procedures were evaluated for bias and precision. Control charts show that data from seven of the analytical procedures were biased throughout the analysis period for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, dissolved inorganic carbon, dissolved organic carbon (soil expulsions), chloride, magnesium, nitrate (colorimetric method), and pH. Three of the analytical procedures were occasionally biased but were within control limits; they were: calcium (high for high-concentration samples for May 1995), dissolved organic carbon (high for highconcentration samples from January through September 1994), and fluoride (high in samples for April and June 1994). No quality-control sample has been developed for the organic monomeric aluminum procedure. Results from the filter-blank and analytical-blank analyses indicate that all analytical procedures in which blanks were run were within control limits, although values for a few blanks were outside the control limits. Blanks were not analyzed for acid-neutralizing capacity, dissolved inorganic carbon, fluoride, nitrate (colorimetric method), or pH. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in 14 of the 18 procedures. Data-quality objectives were met by more than 90 percent of the samples analyzed in all procedures except total monomeric aluminum (85 percent of samples met objectives), total aluminum (70 percent of samples met objectives), and dissolved organic carbon (85 percent of samples met objectives). Triplicate samples were not analyzed for ammonium, fluoride, dissolved inorganic carbon, or nitrate (colorimetric method). Results of the USGS interlaboratory Standard Reference Sample Program indicated high data quality with a median result of 3.6 of a possible 4.0. Environment Canada's LRTAP interlaboratory study results indicated that more than 85 percent of the samples met data-quality objectives in 6 of the 12 analyses; exceptions were calcium, dissolved organic carbon, chloride, pH, potassium, and sodium. Data-quality objectives were not met for calcium samples in one LRTAP study, but 94 percent of samples analyzed were within control limits for the remaining studies. Data-quality objectives were not met by 35 percent of samples analyzed for dissolved organic carbon, but 94 percent of sample values were within 20 percent of the most probable value. Data-quality objectives were not met for 30 percent of samples analyzed for chloride, but 90 percent of sample values were within 20 percent of the most probable value. Measurements of samples with a pH above 6.0 were biased high in 54 percent of the samples, although 85 percent of the samples met data-quality objectives for pH measurements below 6.0. Data-quality objectives for potassium and sodium were not met in one study (only 33 percent of the samples analyzed met the objectives), although 85 percent of the sample values were within control limits for the other studies. Measured sodium values were above the upper control limit in all studies. Results from blind reference-sample analyses indicated that data

  5. Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York - July 2005 through June 2007

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2009-01-01

    The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2005 through June 2007. Results for the quality-control samples for 19 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: total aluminum, calcium, magnesium, nitrate (colorimetric method), potassium, silicon, sodium, and sulfate. Eight of the analytical procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits; these procedures were: total aluminum, calcium, dissolved organic carbon, chloride, nitrate (ion chromatograph), potassium, silicon, and sulfate. The magnesium and pH procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The acid-neutralizing capacity, total monomeric aluminum, nitrite, and specific conductance procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicated that the procedures for 16 of 17 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 21 analytes. At least 93 percent of the samples met data-quality objectives for all analytes except acid-neutralizing capacity (85 percent of samples met objectives), total monomeric aluminum (83 percent of samples met objectives), total aluminum (85 percent of samples met objectives), and chloride (85 percent of samples met objectives). The ammonium and total dissolved nitrogen did not meet the data-quality objectives. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project met the Troy Laboratory data-quality objectives for 87 percent of the samples analyzed. The P-sample (low-ionic-strength constituents) analysis had two outliers each in two studies. The T-sample (trace constituents) analysis and the N-sample (nutrient constituents) analysis had one outlier each in two studies. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 85 percent of the samples met data-quality objectives for 11 of the 14 analytes; the exceptions were acid-neutralizing capacity, total aluminum and ammonium. Data-quality objectives were not met in 41 percent of samples analyzed for acid-neutralizing capacity, 50 percent of samples analyzed for total aluminum, and 44 percent of samples analyzed for ammonium. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 86 percent of the samples analyzed for calcium, magnesium, pH, potassium, and sodium. Data-quality objectives were met by 76 percent of the samples analyzed for chloride, 80 percent of the samples analyzed for specific conductance, and 77 percent of the samples analyzed for sulfate.

  6. Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York - July 2001 Through June 2003

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2009-01-01

    The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2001 through June 2003. Results for the quality-control samples for 19 analytical procedures were evaluated for bias and precision. Control charts indicate that data for six of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, chloride, magnesium, nitrate (ion chromatography), potassium, and sodium. The calcium procedure was biased throughout the analysis period for the high-concentration sample, but was within control limits. The total monomeric aluminum and fluoride procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The total aluminum, pH, specific conductance, and sulfate procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 16 of 18 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for the dissolved organic carbon or specific conductance procedures. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 21 analytes. At least 90 percent of the samples met data-quality objectives for all procedures except total monomeric aluminum (83 percent of samples met objectives), total aluminum (76 percent of samples met objectives), ammonium (73 percent of samples met objectives), dissolved organic carbon (86 percent of samples met objectives), and nitrate (81 percent of samples met objectives). The data-quality objective was not met for the nitrite procedure. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated satisfactory or above data quality over the time period, with most performance ratings for each sample in the good-to-excellent range. The N-sample (nutrient constituents) analysis had one unsatisfactory rating for the ammonium procedure in one study. The T-sample (trace constituents) analysis had one unsatisfactory rating for the magnesium procedure and one marginal rating for the potassium procedure in one study and one unsatisfactory rating for the sodium procedure in another. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 90 percent of the samples met data-quality objectives for 10 of the 14 analytes; the exceptions were acid-neutralizing capacity, ammonium, dissolved organic carbon, and sodium. Data-quality objectives were not met in 37 percent of samples analyzed for acid-neutralizing capacity, 28 percent of samples analyzed for dissolved organic carbon, and 30 percent of samples analyzed for sodium. Results indicate a positive bias for the ammonium procedure in one study and a negative bias in another. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 90 percent of the samples analyzed for calcium, chloride, magnesium, pH, potassium, and sodium. Data-quality objectives were met by 78 percent of

  7. Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York--July 1999 through June 2001

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2006-01-01

    The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's LabMaster data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality-control samples analyzed from July 1999 through June 2001. Results for the quality-control samples for 18 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, total aluminum, calcium, chloride and nitrate (ion chromatography and colormetric method) and sulfate. The total aluminum and dissolved organic carbon procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits. The calcium and specific conductance procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The magnesium procedure was biased for the high-concentration and low concentration samples, but was within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 14 of 15 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 17 of the 18 analytes. At least 90 percent of the samples met data-quality objectives for all analytes except ammonium (81 percent of samples met objectives), chloride (75 percent of samples met objectives), and sodium (86 percent of samples met objectives). Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality over the time period, with most ratings for each sample in the good to excellent range. The P-sample (low-ionic-strength constituents) analysis had one satisfactory rating for the specific conductance procedure in one study. The T-sample (trace constituents) analysis had one satisfactory rating for the aluminum procedure in one study and one unsatisfactory rating for the sodium procedure in another. The remainder of the samples had good or excellent ratings for each study. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 89 percent of the samples met data-quality objectives for 10 of the 14 analytes; the exceptions were ammonium, total aluminum, dissolved organic carbon, and sodium. Results indicate a positive bias for the ammonium procedure in all studies. Data-quality objectives were not met in 50 percent of samples analyzed for total aluminum, 38 percent of samples analyzed for dissolved organic carbon, and 27 percent of samples analyzed for sodium. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 91 percent of the samples analyzed for calcium, chloride, fluoride, magnesium, pH, potassium, and sulfate. Data-quality objectives were met by 75 percent of the samples analyzed for sodium and 58 percent of the samples analyzed for specific conductance.

  8. Measuring Software Product Quality: The ISO 25000 Series and CMMI

    DTIC Science & Technology

    2004-06-14

    performance objectives” covers objectives and requirements for product quality, service quality , and process performance. Process performance objectives...such that product quality, service quality , and process performance attributes are measurable and controlled throughout the project (internal and

  9. 7 CFR 275.10 - Scope and purpose.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to enhanced funding. (b) The objectives of quality control reviews are to provide: (1) A systematic... FOOD STAMP AND FOOD DISTRIBUTION PROGRAM PERFORMANCE REPORTING SYSTEM Quality Control (QC) Reviews... responsible for conducting quality control reviews. For food stamp quality control reviews, a sample of...

  10. A multiple objective optimization approach to quality control

    NASA Technical Reports Server (NTRS)

    Seaman, Christopher Michael

    1991-01-01

    The use of product quality as the performance criteria for manufacturing system control is explored. The goal in manufacturing, for economic reasons, is to optimize product quality. The problem is that since quality is a rather nebulous product characteristic, there is seldom an analytic function that can be used as a measure. Therefore standard control approaches, such as optimal control, cannot readily be applied. A second problem with optimizing product quality is that it is typically measured along many dimensions: there are many apsects of quality which must be optimized simultaneously. Very often these different aspects are incommensurate and competing. The concept of optimality must now include accepting tradeoffs among the different quality characteristics. These problems are addressed using multiple objective optimization. It is shown that the quality control problem can be defined as a multiple objective optimization problem. A controller structure is defined using this as the basis. Then, an algorithm is presented which can be used by an operator to interactively find the best operating point. Essentially, the algorithm uses process data to provide the operator with two pieces of information: (1) if it is possible to simultaneously improve all quality criteria, then determine what changes to the process input or controller parameters should be made to do this; and (2) if it is not possible to improve all criteria, and the current operating point is not a desirable one, select a criteria in which a tradeoff should be made, and make input changes to improve all other criteria. The process is not operating at an optimal point in any sense if no tradeoff has to be made to move to a new operating point. This algorithm ensures that operating points are optimal in some sense and provides the operator with information about tradeoffs when seeking the best operating point. The multiobjective algorithm was implemented in two different injection molding scenarios: tuning of process controllers to meet specified performance objectives and tuning of process inputs to meet specified quality objectives. Five case studies are presented.

  11. Nonlinear Multiobjective MPC-Based Optimal Operation of a High Consistency Refining System in Papermaking

    DOE PAGES

    Li, Mingjie; Zhou, Ping; Wang, Hong; ...

    2017-09-19

    As one of the most important unit in the papermaking industry, the high consistency (HC) refining system is confronted with challenges such as improving pulp quality, energy saving, and emissions reduction in its operation processes. Here in this correspondence, an optimal operation of HC refining system is presented using nonlinear multiobjective model predictive control strategies that aim at set-point tracking objective of pulp quality, economic objective, and specific energy (SE) consumption objective, respectively. First, a set of input and output data at different times are employed to construct the subprocess model of the state process model for the HC refiningmore » system, and then the Wiener-type model can be obtained through combining the mechanism model of Canadian Standard Freeness and the state process model that determines their structures based on Akaike information criterion. Second, the multiobjective optimization strategy that optimizes both the set-point tracking objective of pulp quality and SE consumption is proposed simultaneously, which uses NSGA-II approach to obtain the Pareto optimal set. Furthermore, targeting at the set-point tracking objective of pulp quality, economic objective, and SE consumption objective, the sequential quadratic programming method is utilized to produce the optimal predictive controllers. In conclusion, the simulation results demonstrate that the proposed methods can make the HC refining system provide a better performance of set-point tracking of pulp quality when these predictive controllers are employed. In addition, while the optimal predictive controllers orienting with comprehensive economic objective and SE consumption objective, it has been shown that they have significantly reduced the energy consumption.« less

  12. Nonlinear Multiobjective MPC-Based Optimal Operation of a High Consistency Refining System in Papermaking

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Li, Mingjie; Zhou, Ping; Wang, Hong

    As one of the most important unit in the papermaking industry, the high consistency (HC) refining system is confronted with challenges such as improving pulp quality, energy saving, and emissions reduction in its operation processes. Here in this correspondence, an optimal operation of HC refining system is presented using nonlinear multiobjective model predictive control strategies that aim at set-point tracking objective of pulp quality, economic objective, and specific energy (SE) consumption objective, respectively. First, a set of input and output data at different times are employed to construct the subprocess model of the state process model for the HC refiningmore » system, and then the Wiener-type model can be obtained through combining the mechanism model of Canadian Standard Freeness and the state process model that determines their structures based on Akaike information criterion. Second, the multiobjective optimization strategy that optimizes both the set-point tracking objective of pulp quality and SE consumption is proposed simultaneously, which uses NSGA-II approach to obtain the Pareto optimal set. Furthermore, targeting at the set-point tracking objective of pulp quality, economic objective, and SE consumption objective, the sequential quadratic programming method is utilized to produce the optimal predictive controllers. In conclusion, the simulation results demonstrate that the proposed methods can make the HC refining system provide a better performance of set-point tracking of pulp quality when these predictive controllers are employed. In addition, while the optimal predictive controllers orienting with comprehensive economic objective and SE consumption objective, it has been shown that they have significantly reduced the energy consumption.« less

  13. [An object-oriented intelligent engineering design approach for lake pollution control].

    PubMed

    Zou, Rui; Zhou, Jing; Liu, Yong; Zhu, Xiang; Zhao, Lei; Yang, Ping-Jian; Guo, Huai-Cheng

    2013-03-01

    Regarding the shortage and deficiency of traditional lake pollution control engineering techniques, a new lake pollution control engineering approach was proposed in this study, based on object-oriented intelligent design (OOID) from the perspective of intelligence. It can provide a new methodology and framework for effectively controlling lake pollution and improving water quality. The differences between the traditional engineering techniques and the OOID approach were compared. The key points for OOID were described as object perspective, cause and effect foundation, set points into surface, and temporal and spatial optimization. The blue algae control in lake was taken as an example in this study. The effect of algae control and water quality improvement were analyzed in details from the perspective of object-oriented intelligent design based on two engineering techniques (vertical hydrodynamic mixer and pumping algaecide recharge). The modeling results showed that the traditional engineering design paradigm cannot provide scientific and effective guidance for engineering design and decision-making regarding lake pollution. Intelligent design approach is based on the object perspective and quantitative causal analysis in this case. This approach identified that the efficiency of mixers was much higher than pumps in achieving the goal of low to moderate water quality improvement. However, when the objective of water quality exceeded a certain value (such as the control objective of peak Chla concentration exceeded 100 microg x L(-1) in this experimental water), the mixer cannot achieve this goal. The pump technique can achieve the goal but with higher cost. The efficiency of combining the two techniques was higher than using one of the two techniques alone. Moreover, the quantitative scale control of the two engineering techniques has a significant impact on the actual project benefits and costs.

  14. Professional Development for Water Quality Control Personnel.

    ERIC Educational Resources Information Center

    Shepard, Clinton Lewis

    This study investigated the availability of professional development opportunities for water quality control personnel in the midwest. The major objective of the study was to establish a listing of educational opportunities for the professional development of water quality control personnel and to compare these with the opportunities technicians…

  15. Control design for future agile fighters

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Davidson, John B.

    1991-01-01

    The CRAFT control design methodology is presented. CRAFT stands for the design objectives addressed, namely, Control power, Robustness, Agility, and Flying Qualities Tradeoffs. The approach combines eigenspace assignment, which allows for direct specification of eigenvalues and eigenvectors, and a graphical approach for representing control design metrics that captures numerous design goals in one composite illustration. The methodology makes use of control design metrics from four design objective areas, namely, control power, robustness, agility, and flying qualities. An example of the CRAFT methodology as well as associated design issues are presented.

  16. Controllability of Complex Dynamic Objects

    NASA Astrophysics Data System (ADS)

    Kalach, G. G.; Kazachek, N. A.; Morozov, A. A.

    2017-01-01

    Quality requirements for mobile robots intended for both specialized and everyday use are increasing in step with the complexity of the technological tasks assigned to the robots. Whether a mobile robot is for ground, aerial, or underwater use, the relevant quality characteristics can be summarized under the common concept of agility. This term denotes the object’s (the robot)’s ability to react quickly to control actions (change speed and direction), turn in a limited area, etc. When using this approach in integrated assessment of the quality characteristics of an object with the control system, it seems more constructive to use the term “degree of control”. This paper assesses the degree of control by an example of a mobile robot with the variable-geometry drive wheel axle. We show changes in the degree of control depending on the robot’s configuration, and results illustrated by calculation data, computer and practical experiments. We describe the prospects of using intelligent technology for efficient control of objects with a high degree of controllability.

  17. F-8C digital CCV flight control laws

    NASA Technical Reports Server (NTRS)

    Hartmann, G. L.; Hauge, J. A.; Hendrick, R. C.

    1976-01-01

    A set of digital flight control laws were designed for the NASA F-8C digital fly-by-wire aircraft. The control laws emphasize Control Configured Vehicle (CCV) benefits. Specific pitch axis objectives were improved handling qualities, angle-of-attack limiting, gust alleviation, drag reduction in steady and maneuvering flight, and a capability to fly with reduced static stability. The lateral-directional design objectives were improved Dutch roll damping and turn coordination over a wide range in angle-of-attack. An overall program objective was to explore the use of modern control design methodilogy to achieve these specific CCV benefits. Tests for verifying system integrity, an experimental design for handling qualities evaluation, and recommended flight test investigations were specified.

  18. Influence of grid control and object detection on radiation exposure and image quality using mobile C-arms - first results.

    PubMed

    Gosch, D; Ratzmer, A; Berauer, P; Kahn, T

    2007-09-01

    The objective of this study was to examine the extent to which the image quality on mobile C-arms can be improved by an innovative exposure rate control system (grid control). In addition, the possible dose reduction in the pulsed fluoroscopy mode using 25 pulses/sec produced by automatic adjustment of the pulse rate through motion detection was to be determined. As opposed to conventional exposure rate control systems, which use a measuring circle in the center of the field of view, grid control is based on a fine mesh of square cells which are overlaid on the entire fluoroscopic image. The system uses only those cells for exposure control that are covered by the object to be visualized. This is intended to ensure optimally exposed images, regardless of the size, shape and position of the object to be visualized. The system also automatically detects any motion of the object. If a pulse rate of 25 pulses/sec is selected and no changes in the image are observed, the pulse rate used for pulsed fluoroscopy is gradually reduced. This may decrease the radiation exposure. The influence of grid control on image quality was examined using an anthropomorphic phantom. The dose reduction achieved with the help of object detection was determined by evaluating the examination data of 146 patients from 5 different countries. The image of the static phantom made with grid control was always optimally exposed, regardless of the position of the object to be visualized. The average dose reduction when using 25 pulses/sec resulting from object detection and automatic down-pulsing was 21 %, and the maximum dose reduction was 60 %. Grid control facilitates C-arm operation, since optimum image exposure can be obtained independently of object positioning. Object detection may lead to a reduction in radiation exposure for the patient and operating staff.

  19. Many roads may lead to Rome: Selected features of quality control within environmental assessment systems in the US, NL, CA, and UK

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Günther, Markus, E-mail: markus.guenther@tu-berlin.de; Geißler, Gesa; Köppel, Johann

    As there is no one-and-only concept on how to precisely define and establish quality control (QC) or quality assurance (QA) in the making of environmental assessments (EA), this paper presents selected features of international approaches that address quality in EA systems in the USA, the Netherlands, Canada, and the United Kingdom. Based on explanative case studies, we highlight the embedding of specific quality control features within the EA systems, the objectives and processes, and relevant transparency challenges. Such features of QC/QA approaches can be considered in cases where substantial quality control and assurance efforts are still missing. Yet further researchmore » needs to be conducted on the efficacy of these approaches, which remains beyond the scope of this study. - Highlights: • We present four tools for quality control and assurance from different EA systems. • Approaches vary in institutional setting, objectives, procedures, and transparency. • Highlighted features might provide guidance in cases where QC/QA is still lacking.« less

  20. Contract Quality Assurance and Pricing Practices for Patriot Missile Procurements

    DTIC Science & Technology

    1995-06-26

    The audit objectives were to evaluate DoD and Raytheon quality assurance and pricing practices for Patriot missile circuit boards. We also evaluated the management control program as it applied to the audit objectives.

  1. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sailer, S.J.

    This Quality Assurance Project Plan (QAPJP) specifies the quality of data necessary and the characterization techniques employed at the Idaho National Engineering Laboratory (INEL) to meet the objectives of the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) Transuranic Waste Characterization Quality Assurance Program Plan (QAPP) requirements. This QAPJP is written to conform with the requirements and guidelines specified in the QAPP and the associated documents referenced in the QAPP. This QAPJP is one of a set of five interrelated QAPjPs that describe the INEL Transuranic Waste Characterization Program (TWCP). Each of the five facilities participating in the TWCPmore » has a QAPJP that describes the activities applicable to that particular facility. This QAPJP describes the roles and responsibilities of the Idaho Chemical Processing Plant (ICPP) Analytical Chemistry Laboratory (ACL) in the TWCP. Data quality objectives and quality assurance objectives are explained. Sample analysis procedures and associated quality assurance measures are also addressed; these include: sample chain of custody; data validation; usability and reporting; documentation and records; audits and 0385 assessments; laboratory QC samples; and instrument testing, inspection, maintenance and calibration. Finally, administrative quality control measures, such as document control, control of nonconformances, variances and QA status reporting are described.« less

  2. Quality Control (QC) System Development for the Pell Grant Program: A Conceptual Framework.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    The objectives of the Pell Grant quality control (QC) system and the general definition of QC are considered. Attention is also directed to: the objectives of the Stage II Pell Grant QC system design and testing project, the approach used to develop the QC system, and the interface of the QC system and the Pell Grant delivery system. The…

  3. Revision 2 of the Enbridge Quality Assurance Project Plan

    EPA Pesticide Factsheets

    This Quality Assurance Project Plan (QAPP) presents Revision 2 of the organization, objectives, planned activities, and specific quality assurance/quality control (QA/QC) procedures associated with the Enbridge Marshall Pipeline Release Project.

  4. Double shell tanks (DST) chemistry control data quality objectives

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BANNING, D.L.

    2001-10-09

    One of the main functions of the River Protection Project is to store the Hanford Site tank waste until the Waste Treatment Plant (WTP) is ready to receive and process the waste. Waste from the older single-shell tanks is being transferred to the newer double-shell tanks (DSTs). Therefore, the integrity of the DSTs must be maintained until the waste from all tanks has been retrieved and transferred to the WTP. To help maintain the integrity of the DSTs over the life of the project, specific chemistry limits have been established to control corrosion of the DSTs. These waste chemistry limitsmore » are presented in the Technical Safety Requirements (TSR) document HNF-SD-WM-TSR-006, Sec. 5 . IS, Rev 2B (CHG 200 I). In order to control the chemistry in the DSTs, the Chemistry Control Program will require analyses of the tank waste. This document describes the Data Quality Objective (DUO) process undertaken to ensure appropriate data will be collected to control the waste chemistry in the DSTs. The DQO process was implemented in accordance with Data Quality Objectives for Sampling and Analyses, HNF-IP-0842, Rev. Ib, Vol. IV, Section 4.16, (Banning 2001) and the U.S. Environmental Protection Agency EPA QA/G4, Guidance for the Data Quality Objectives Process (EPA 1994), with some modifications to accommodate project or tank specific requirements and constraints.« less

  5. Research on Objectives for High-School Biology

    ERIC Educational Resources Information Center

    Korgan, John J., Jr.; Wilson, John T.

    1973-01-01

    Describes procedures to develop instructional objectives for high school biology. Two kinds of objectives are identified as pre-objectives and performance objectives. Models to classify these in branches of biology and to ensure quality control are provided. (PS)

  6. Development of a quality control test procedure for characterizing fracture properties of asphalt mixtures.

    DOT National Transportation Integrated Search

    2011-06-01

    The main objective of this study is to investigate the use of the semi-circular bend (SCB) : test as a quality assurance/quality control (QA/QC) measure for field construction. : Comparison of fracture properties from the SCB test and fatigue beam te...

  7. Quality-control design for surface-water sampling in the National Water-Quality Network

    USGS Publications Warehouse

    Riskin, Melissa L.; Reutter, David C.; Martin, Jeffrey D.; Mueller, David K.

    2018-04-10

    The data-quality objectives for samples collected at surface-water sites in the National Water-Quality Network include estimating the extent to which contamination, matrix effects, and measurement variability affect interpretation of environmental conditions. Quality-control samples provide insight into how well the samples collected at surface-water sites represent the true environmental conditions. Quality-control samples used in this program include field blanks, replicates, and field matrix spikes. This report describes the design for collection of these quality-control samples and the data management needed to properly identify these samples in the U.S. Geological Survey’s national database.

  8. Quality Assurance in Dietetic Services Workshop for the Dietetic Assistant.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This workshop guide is a unit of study for teaching dietetic assistants to work with quality control in a nursing home or hospital. The objective of the unit is to enable the students to develop and expand a dietetic services administrative and clinical quality assurance program in his or her own institution. Following the unit objective, the unit…

  9. ENVIRONMENTAL TECHNOLOGY VERIFICATION FOR AIR POLLUTION CONTROL TECHNOLOGIES: FINAL REPORT

    EPA Science Inventory

    The technical objective of the Environmental Technology Verification (ETV) Program's Air Pollution Control Technology (APCT) Center is to verify environmental technology performance by obtaining objective quality-assured data, thus providing potential purchasers and permitters wi...

  10. Quality Control Review of Coopers & Lybrand L.L.P. Polytechnic University. Fiscal Year Ended June 30, 1996

    DTIC Science & Technology

    1998-05-18

    The objective of a quality control review is to assure that the audit was conducted in accordance with applicable standards and meets the auditing...requirements of the OMB Circular A-I 33. As the cognizant Federal agency for the University, we conducted a quality control review of the audit working...papers. We focused our review on the following qualitative aspects of the audit : due professional care, planning, supervision, independence, quality

  11. Image processing system performance prediction and product quality evaluation

    NASA Technical Reports Server (NTRS)

    Stein, E. K.; Hammill, H. B. (Principal Investigator)

    1976-01-01

    The author has identified the following significant results. A new technique for image processing system performance prediction and product quality evaluation was developed. It was entirely objective, quantitative, and general, and should prove useful in system design and quality control. The technique and its application to determination of quality control procedures for the Earth Resources Technology Satellite NASA Data Processing Facility are described.

  12. Information quality-control model

    NASA Technical Reports Server (NTRS)

    Vincent, D. A.

    1971-01-01

    Model serves as graphic tool for estimating complete product objectives from limited input information, and is applied to cost estimations, product-quality evaluations, and effectiveness measurements for manpower resources allocation. Six product quality levels are defined.

  13. Sleep Quality in Adolescents With Chronic Fatigue Syndrome/Myalgic Encephalomyelitis (CFS/ME).

    PubMed

    Josev, Elisha K; Jackson, Melinda L; Bei, Bei; Trinder, John; Harvey, Adrienne; Clarke, Cathriona; Snodgrass, Kelli; Scheinberg, Adam; Knight, Sarah J

    2017-09-15

    Little is known about the type and severity of sleep disturbances in the pediatric chronic fatigue syndrome/myalgic encephalomyelitis (CFS/ME) population, compared with healthy adolescents. Using a range of objective and subjective measures, the aim of this study was to investigate sleep quality, the relationship between objective and subjective measures of sleep quality, and their associations with anxiety in adolescents with CFS/ME compared with healthy controls. Twenty-one adolescents with CFS/ME aged 13 to 18 years (mean age 15.57 ± 1.40), and 145 healthy adolescents aged 13 to 18 years (mean age 16.2 ± 1.00) wore actigraphy watches continuously for 2 weeks to collect a number of objective sleep variables. The Pittsburgh Sleep Quality Index was used to obtain a subjective measure of sleep quality. Anxiety was measured by the Spence Children's Anxiety scale. On average over the 2-week period, adolescents with CFS/ME were found to have (1) significantly longer objective sleep onset latency, time in bed, total sleep time, and a later rise time (all P < .005), and (2) significantly poorer subjective sleep quality ( P < .001), compared with healthy adolescents. The CFS/ME patient group displayed higher levels of anxiety ( P < .05), and in both groups, higher levels of anxiety were significantly related to poorer subjective sleep quality ( P < .001). This study provides objective and subjective evidence of sleep disturbance in adolescents with CFS/ME compared with healthy adolescent controls. © 2017 American Academy of Sleep Medicine

  14. Collaborative real-time scheduling of multiple PTZ cameras for multiple object tracking in video surveillance

    NASA Astrophysics Data System (ADS)

    Liu, Yu-Che; Huang, Chung-Lin

    2013-03-01

    This paper proposes a multi-PTZ-camera control mechanism to acquire close-up imagery of human objects in a surveillance system. The control algorithm is based on the output of multi-camera, multi-target tracking. Three main concerns of the algorithm are (1) the imagery of human object's face for biometric purposes, (2) the optimal video quality of the human objects, and (3) minimum hand-off time. Here, we define an objective function based on the expected capture conditions such as the camera-subject distance, pan tile angles of capture, face visibility and others. Such objective function serves to effectively balance the number of captures per subject and quality of captures. In the experiments, we demonstrate the performance of the system which operates in real-time under real world conditions on three PTZ cameras.

  15. [Quality control in anesthesiology].

    PubMed

    Muñoz-Ramón, J M

    1995-03-01

    The process of quality control and auditing of anesthesiology allows us to evaluate care given by a service and solve problems that are detected. Quality control is a basic element of care giving and is only secondarily an area of academic research; it is therefore a meaningless effort if the information does not serve to improve departmental procedures. Quality assurance procedures assume certain infrastructural requirements and an initial period of implementation and adjustment. The main objectives of quality control are the reduction of morbidity and mortality due to anesthesia, assurance of the availability and proper management of resources and, finally, the well-being and safety of the patient.

  16. Bootstrap Signal-to-Noise Confidence Intervals: An Objective Method for Subject Exclusion and Quality Control in ERP Studies

    PubMed Central

    Parks, Nathan A.; Gannon, Matthew A.; Long, Stephanie M.; Young, Madeleine E.

    2016-01-01

    Analysis of event-related potential (ERP) data includes several steps to ensure that ERPs meet an appropriate level of signal quality. One such step, subject exclusion, rejects subject data if ERP waveforms fail to meet an appropriate level of signal quality. Subject exclusion is an important quality control step in the ERP analysis pipeline as it ensures that statistical inference is based only upon those subjects exhibiting clear evoked brain responses. This critical quality control step is most often performed simply through visual inspection of subject-level ERPs by investigators. Such an approach is qualitative, subjective, and susceptible to investigator bias, as there are no standards as to what constitutes an ERP of sufficient signal quality. Here, we describe a standardized and objective method for quantifying waveform quality in individual subjects and establishing criteria for subject exclusion. The approach uses bootstrap resampling of ERP waveforms (from a pool of all available trials) to compute a signal-to-noise ratio confidence interval (SNR-CI) for individual subject waveforms. The lower bound of this SNR-CI (SNRLB) yields an effective and objective measure of signal quality as it ensures that ERP waveforms statistically exceed a desired signal-to-noise criterion. SNRLB provides a quantifiable metric of individual subject ERP quality and eliminates the need for subjective evaluation of waveform quality by the investigator. We detail the SNR-CI methodology, establish the efficacy of employing this approach with Monte Carlo simulations, and demonstrate its utility in practice when applied to ERP datasets. PMID:26903849

  17. KPMG Peat Marwick LLP Corporation of Mercer University Fiscal Year Ended June 30, 1995

    DTIC Science & Technology

    1997-06-11

    The objective of a quality control review is to ensure that the audit was conducted in accordance with applicable standards and meets the auditing...requirements of the OMB Circular A-133. We conducted a quality control review of the audit working papers. We focused our review on the following...qualitative aspects of the audit : due professional care, planning, supervision, independence, quality control, internal controls, substantive testing, general and specific compliance testing, and the Schedule of Federal Awards.

  18. Ernst and Young LLP South Carolina Research Authority Fiscal Year Ended June 30, 1995.

    DTIC Science & Technology

    1997-06-30

    The objective of a quality control review is to ensure that the audit was conducted in accordance with applicable standards and meets the auditing...requirements of OMB Circular A-133. As the Federal oversight agency for SCRA, we conducted a quality control review of the audit working papers. We...focused our review on the following qualitative aspects of the audit : due professional care, planning, supervision, independence, quality control

  19. LOVE CANAL MONITORING PROGRAM. GCA QA/QC (QUALITY ASSURANCE/QUALITY CONTROL) SUMMARY REPORT

    EPA Science Inventory

    One of the most important responsibilities of the Love Canal prime contractor was the institution and maintenance of a quality assurance program. An important objective of the quality assurance program was to alert the subcontractors to the importance of high quality work on thei...

  20. 10 CFR 71.115 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... RADIOACTIVE MATERIAL Quality Assurance § 71.115 Control of purchased material, equipment, and services. (a... source evaluation and selection, objective evidence of quality furnished by the contractor or... available, this documentary evidence for the life of the package to which it applies. The licensee...

  1. 10 CFR 71.115 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... RADIOACTIVE MATERIAL Quality Assurance § 71.115 Control of purchased material, equipment, and services. (a... source evaluation and selection, objective evidence of quality furnished by the contractor or... available, this documentary evidence for the life of the package to which it applies. The licensee...

  2. 10 CFR 71.115 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... RADIOACTIVE MATERIAL Quality Assurance § 71.115 Control of purchased material, equipment, and services. (a... source evaluation and selection, objective evidence of quality furnished by the contractor or... available, this documentary evidence for the life of the package to which it applies. The licensee...

  3. 10 CFR 71.115 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... RADIOACTIVE MATERIAL Quality Assurance § 71.115 Control of purchased material, equipment, and services. (a... source evaluation and selection, objective evidence of quality furnished by the contractor or... available, this documentary evidence for the life of the package to which it applies. The licensee...

  4. 10 CFR 71.115 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... RADIOACTIVE MATERIAL Quality Assurance § 71.115 Control of purchased material, equipment, and services. (a... source evaluation and selection, objective evidence of quality furnished by the contractor or... available, this documentary evidence for the life of the package to which it applies. The licensee...

  5. Quality assurance: Importance of systems and standard operating procedures

    PubMed Central

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company. PMID:21584180

  6. Quality assurance: Importance of systems and standard operating procedures.

    PubMed

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  7. Bel Marin Keys Unit V Expansion of the Hamilton Wetland Restoration Project. Volume 3. Responses to Comments, Final Supplemental Environmental Impact Report/Environmental Impact Statement

    DTIC Science & Technology

    2003-04-01

    include a program for implementing new development and construction site storm water quality controls. The objective of this component is to ensure...impacts (see Storm Water Quality Control, below). The Regional Board has adopted U.S. EPA’s Clean Water Act Section 404(b)(1) "Guidelines for...other Waters of the State. Storm Water Quality Control Storm water is the major source of fresh water to creeks and waterways. Storm water quality is

  8. Assessment of non-destructive testing technologies for quality control/quality assurance of asphalt mixtures : [tech transfer summary].

    DOT National Transportation Integrated Search

    2015-02-01

    Evaluation of the actual performance (quality) of pavements requires : in situ nondestructive testing (NDT) techniques that can accurately : measure the most critical, objective, and sensitive properties of : pavement systems.

  9. Quality Control Review of Office of the State Auditor Mississippi State University Fiscal Year Ended June 30, 1996

    DTIC Science & Technology

    1998-04-10

    The objective of a quality control review is to ensure that the audit was conducted in accordance with applicable standards and meets the auditing requirements of the 0MB Circular A-i 33. As a Federal finding agency for the University, we conducted a quality control review of the audit working papers. We focused our review on the following qualitative aspects of the audit : due professional

  10. KPMG Peat Marwick LLP GreatLakes Composites Consortium, Inc. Fiscal Year Ended December 31, 1995

    DTIC Science & Technology

    1997-06-25

    The objective of a quality control review is to assure that the audit was conducted in accordance with applicable standards and meets the auditing...requirements of the OMB Circular A-133. As the cognizant agency for the Institute, we conducted a quality control review of the audit working papers. We...focused our review on the qualitative aspects of the audit : due professional care, planning, supervision, independence, quality control, internal

  11. Field Implementation of Handheld FTIR Spectrometer for Polymer Content Determination and for Quality Control of RAP Mixtures : Research Project Capsule

    DOT National Transportation Integrated Search

    2017-10-01

    The purpose of this research study is to determine if the implementation of FTIRS in Louisiana for determining polymer content in asphalt mixtures and for quality control of recycled asphalt mixtures is feasible. The ultimate objective is to develop ...

  12. Development of models to estimate the subgrade and subbase layers' resilient modulus from in situ devices test results for construction control.

    DOT National Transportation Integrated Search

    2008-04-01

    The objective of this study was to develop resilient modulus prediction models for possible application in the quality control/quality assurance (QC/QA) procedures during and after the construction of pavement layers. Field and laboratory testing pro...

  13. OZONE AMBIENT AIR QUALITY STANDARD HAS BENEFICIAL EFFECT ON PONDEROSA PINE IN CALIFORNIA

    EPA Science Inventory

    Ambient air quality standards and control strategies are implemented to protect humans and vegetation from adverse effects. However, to date there has not been a simple and objective method to determine if the standards and resultant control strategies have reduced O3 impacts on ...

  14. COMP report: CPQR technical quality control guidelines for low-dose-rate permanent seed brachytherapy.

    PubMed

    Beaulieu, Luc; Radford, Dee-Ann; Eduardo Villarreal-Barajas, J

    2018-03-14

    The Canadian Organization of Medical Physicists (COMP), in close partnership with the Canadian Partnership for Quality Radiotherapy (CPQR) has developed a series of Technical Quality Control (TQC) guidelines for radiation treatment equipment. These guidelines outline the performance objectives that equipment should meet in order to ensure an acceptable level of radiation treatment quality. The TQC guidelines have been rigorously reviewed and field tested in a variety of Canadian radiation treatment facilities. The development process enables rapid review and update to keep the guidelines current with changes in technology. This article contains detailed performance objectives and safety criteria for low-dose-rate (LDR) permanent seed brachytherapy. © 2018 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

  15. Moderators of the Relationship between Implicit and Explicit Evaluation

    ERIC Educational Resources Information Center

    Nosek, Brian A.

    2005-01-01

    Automatic and controlled modes of evaluation sometimes provide conflicting reports of the quality of social objects. This article presents evidence for 4 moderators of the relationship between automatic (implicit) and controlled (explicit) evaluations. Implicit and explicit preferences were measured for a variety of object pairs using a large…

  16. Multi-Site Quality Assurance Project Plan for Wisconsin Public Service Corporation, Peoples Gas Light and Coke Company, and North Shore Gas

    EPA Pesticide Factsheets

    This Multi-Site QAPP presents the organization, data quality objectives (DQOs), a set of anticipated activities, sample analysis, data handling and specific Quality Assurance/Quality Control (QA/QC) procedures associated with Studies done in EPA Region 5

  17. Napa River Salt Marsh Restoration Project. Volume 2: Environmental Impact Statement Comments Letters and Response

    DTIC Science & Technology

    2004-06-01

    The SWMPs must include a program for implementing new development and construction site storm water quality controls. The objective of this...mitigate those impacts (see Storm Water Quality Control, below). The Regional Board has adopted U.S. EPA’s Clean Water Act Section 404(b)(1...impacts to wetlands or other Waters of the State. Storm Water Quality Control Storm water is the major source of fresh water to creeks and waterways. Storm

  18. The effects of a team-based continuous quality improvement intervention on the management of primary care: a randomised controlled trial

    PubMed Central

    Engels, Yvonne; van den Hombergh, Pieter; Mokkink, Henk; van den Hoogen, Henk; van den Bosch, Wil; Grol, Richard

    2006-01-01

    Aim To study the effects of a team-based model for continuous quality improvement (CQI) on primary care practice management. Design of study Randomised controlled trial. Setting Twenty-six intervention and 23 control primary care practices in the Netherlands. Method Practices interested in taking part in the CQI project were, after assessment of their practice organisation, randomly assigned to the intervention or control groups. During a total of five meetings, a facilitator helped the teams in the intervention group select suitable topics for quality improvement and follow a structured approach to achieve improvement objectives. Checklists completed by an outreach visitor, questionnaires for the GPs, staff and patients were used to assemble data on the number and quality of improvement activities undertaken and on practice management prior to the start of the intervention and 1 year later. Results Pre-test and post-test data were compared for the 26 intervention and 23 control practices. A significant intervention effect was found for the number of improvement objectives actually defined (93 versus 54, P<0.001) and successfully completed (80 versus 69% of the projects, P<0.001). The intervention group also improved on more aspects of practice management, as measured by our practice visit method, than the control group but none of these differences proved statistically significant. Conclusion The intervention exerted a significant effect on the number and quality of improvement projects undertaken and self-defined objectives met. Failure of the effects of the intervention on the other dimensions of practice management to achieve significance may be due to the topics selected for some of the improvement projects being only partly covered by the assessment instrument. PMID:17007709

  19. Revisiting the Procedures for the Vector Data Quality Assurance in Practice

    NASA Astrophysics Data System (ADS)

    Erdoğan, M.; Torun, A.; Boyacı, D.

    2012-07-01

    Immense use of topographical data in spatial data visualization, business GIS (Geographic Information Systems) solutions and applications, mobile and location-based services forced the topo-data providers to create standard, up-to-date and complete data sets in a sustainable frame. Data quality has been studied and researched for more than two decades. There have been un-countable numbers of references on its semantics, its conceptual logical and representations and many applications on spatial databases and GIS. However, there is a gap between research and practice in the sense of spatial data quality which increases the costs and decreases the efficiency of data production. Spatial data quality is well-known by academia and industry but usually in different context. The research on spatial data quality stated several issues having practical use such as descriptive information, metadata, fulfillment of spatial relationships among data, integrity measures, geometric constraints etc. The industry and data producers realize them in three stages; pre-, co- and post data capturing. The pre-data capturing stage covers semantic modelling, data definition, cataloguing, modelling, data dictionary and schema creation processes. The co-data capturing stage covers general rules of spatial relationships, data and model specific rules such as topologic and model building relationships, geometric threshold, data extraction guidelines, object-object, object-belonging class, object-non-belonging class, class-class relationships to be taken into account during data capturing. And post-data capturing stage covers specified QC (quality check) benchmarks and checking compliance to general and specific rules. The vector data quality criteria are different from the views of producers and users. But these criteria are generally driven by the needs, expectations and feedbacks of the users. This paper presents a practical method which closes the gap between theory and practice. Development of spatial data quality concepts into developments and application requires existence of conceptual, logical and most importantly physical existence of data model, rules and knowledge of realization in a form of geo-spatial data. The applicable metrics and thresholds are determined on this concrete base. This study discusses application of geo-spatial data quality issues and QA (quality assurance) and QC procedures in the topographic data production. Firstly we introduce MGCP (Multinational Geospatial Co-production Program) data profile of NATO (North Atlantic Treaty Organization) DFDD (DGIWG Feature Data Dictionary), the requirements of data owner, the view of data producers for both data capturing and QC and finally QA to fulfil user needs. Then, our practical and new approach which divides the quality into three phases is introduced. Finally, implementation of our approach to accomplish metrics, measures and thresholds of quality definitions is discussed. In this paper, especially geometry and semantics quality and quality control procedures that can be performed by the producers are discussed. Some applicable best-practices that we experienced on techniques of quality control, defining regulations that define the objectives and data production procedures are given in the final remarks. These quality control procedures should include the visual checks over the source data, captured vector data and printouts, some automatic checks that can be performed by software and some semi-automatic checks by the interaction with quality control personnel. Finally, these quality control procedures should ensure the geometric, semantic, attribution and metadata quality of vector data.

  20. The impact on sleep of a multidisciplinary cognitive behavioural pain management programme: a pilot study.

    PubMed

    Cunningham, Jennifer M; Blake, Catherine; Power, Camillus K; O'Keeffe, Declan; Kelly, Valerie; Horan, Sheila; Spencer, Orla; Fullen, Brona M

    2011-01-10

    Reduced sleep quality is a common complaint among patients with chronic pain, with 50-80% of patients reporting sleep disturbance. Improvements in pain and quality of life measures have been achieved using a multidisciplinary cognitive behavioural therapy pain management programme (CBT-PMP) that aims to recondition attitudes to pain, and improve patients' self-management of their condition. Despite its high prevalence in patients with chronic pain, there is very limited objective evidence for the effect of this intervention on sleep quality. The primary research objective is to investigate the short-term effect of a multidisciplinary CBT-PMP on subjective (measured by Pittsburg Sleep Quality Index) and objective sleep quality (measured by Actigraphy) in patients with chronic pain by comparison with a control group. The secondary objectives will investigate changes in function and mood, and then explore the relationship between objective and subjective sleep quality and physical and psychological outcome measures. Patients who fulfil the inclusion criteria for attendance on the multidisciplinary CBT-PMP in the Adelaide and Meath Hospital, Tallaght, Dublin and are currently listed on the PMP waiting list will be invited to participate in this pilot study. Potential patients will be screened for sleep disturbance [determined by the Pittsburgh Sleep Quality Index (PSQI)]. Those patients with a sleep disturbance (PSQI >5) will be assigned to either the intervention group (immediate treatment), or control group (deferred treatment, i.e. the PMP they are listed for is more than six months away) based on where they appear on the waiting list. Baseline measures of sleep, function, and mood will be obtained using a combination of self-report questionnaires (the Hospital Anxiety and Depression Scale, the Short Form 36 health survey, the Pittsburgh Sleep Quality Index, the Tampa Scale for Kinesiophobia), and functional outcome measures. Sleep will be measured for seven days using actigraphy (Actiwatch 7). These measures will be repeated after the four week multidisciplinary cognitive behavioural therapy pain management programme, and at a two month follow-up. The waiting list control group will be assessed at baseline, and two months later. Analysis for the primary outcome will include between group differences of subjective and objective sleep parameters from baseline to follow-up using Independent T-tests or Mann-Whitney U tests. The secondary outcomes establishing relationships between the sleep variables and physical and psychological outcome measures will be established using multiple linear regression models. This pilot study will evaluate the impact of a multidisciplinary CBT-PMP on both subjective and objective measures of sleep in patients with chronic pain and provide guidance for a larger clinical trial. Current controlled trial ISRCTN: ISRCTN74913595.

  1. 10 CFR 72.154 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... CLASS C WASTE Quality Assurance § 72.154 Control of purchased material, equipment, and services. (a) The..., as appropriate, for source evaluation and selection, objective evidence of quality furnished by the... shall retain or have available this documentary evidence for the life of the ISFSI, MRS, or spent fuel...

  2. 10 CFR 72.154 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CLASS C WASTE Quality Assurance § 72.154 Control of purchased material, equipment, and services. (a) The..., as appropriate, for source evaluation and selection, objective evidence of quality furnished by the... shall retain or have available this documentary evidence for the life of the ISFSI, MRS, or spent fuel...

  3. 10 CFR 72.154 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... CLASS C WASTE Quality Assurance § 72.154 Control of purchased material, equipment, and services. (a) The..., as appropriate, for source evaluation and selection, objective evidence of quality furnished by the... shall retain or have available this documentary evidence for the life of the ISFSI, MRS, or spent fuel...

  4. 10 CFR 72.154 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CLASS C WASTE Quality Assurance § 72.154 Control of purchased material, equipment, and services. (a) The..., as appropriate, for source evaluation and selection, objective evidence of quality furnished by the... shall retain or have available this documentary evidence for the life of the ISFSI, MRS, or spent fuel...

  5. 10 CFR 72.154 - Control of purchased material, equipment, and services.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... CLASS C WASTE Quality Assurance § 72.154 Control of purchased material, equipment, and services. (a) The..., as appropriate, for source evaluation and selection, objective evidence of quality furnished by the... shall retain or have available this documentary evidence for the life of the ISFSI, MRS, or spent fuel...

  6. Greenhouse production of Impatiens wallerana using a controlled-release fertiliser produces quality finished plants with enhanced garden performance

    USDA-ARS?s Scientific Manuscript database

    Nutrient management during production can greatly influence post-production quality of plants. The objective of this research was to evaluate the effect of controlled release fertilizer (CRF) applied at the time of plug planting on the garden performance (post-production) of impatiens (Impatiens wal...

  7. The Quality Control Circle: Is It for Education?

    ERIC Educational Resources Information Center

    Land, Arthur J.

    From its start in Japan after World War II, the Quality Control Circle (Q.C.) approach to management and organizational operation evolved into what it is today: people doing similar work meeting regularly to identify, objectively analyze, and develop solutions to problems. The Q.C. approach meets Maslow's theory of motivation by inviting…

  8. Quality Control of an OSCE Using Generalizability Theory and Many-Faceted Rasch Measurement

    ERIC Educational Resources Information Center

    Iramaneerat, Cherdsak; Yudkowsky, Rachel; Myford, Carol M.; Downing, Steven M.

    2008-01-01

    An Objective Structured Clinical Examination (OSCE) is an effective method for evaluating competencies. However, scores obtained from an OSCE are vulnerable to many potential measurement errors that cases, items, or standardized patients (SPs) can introduce. Monitoring these sources of errors is an important quality control mechanism to ensure…

  9. 33 CFR 337.8 - Reports to higher echelons.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... quality certification or issues the certification with conditions or controls not related to maintenance or enforcement of state water quality standards or significantly exceeding the Federal standard; (5... regional administrator's objections; and (6) When the state fails to grant water quality certification or a...

  10. 33 CFR 337.8 - Reports to higher echelons.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... quality certification or issues the certification with conditions or controls not related to maintenance or enforcement of state water quality standards or significantly exceeding the Federal standard; (5... regional administrator's objections; and (6) When the state fails to grant water quality certification or a...

  11. 33 CFR 337.8 - Reports to higher echelons.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... quality certification or issues the certification with conditions or controls not related to maintenance or enforcement of state water quality standards or significantly exceeding the Federal standard; (5... regional administrator's objections; and (6) When the state fails to grant water quality certification or a...

  12. 33 CFR 337.8 - Reports to higher echelons.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... quality certification or issues the certification with conditions or controls not related to maintenance or enforcement of state water quality standards or significantly exceeding the Federal standard; (5... regional administrator's objections; and (6) When the state fails to grant water quality certification or a...

  13. Quality assurance program requirements, Amendment 5 (9-26-79) to August 1973 issue

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    This standard sets forth general requirements for planning, managing, conducting, and evaluating quality assurance programs for reactor development and test facility projects and associated processes, structures, components, and systems. These quality assurance requirements are based on proven practices and provide the means of control and verification whereby those responsible fo poject management can assure that the quality required for safe, reliable, and economical operation will be achieved. The objective of the program of the programs covered by this standard is to assure that structures, components, systems, and facilities are designed, developed, manufactured, constructed, operated, and maintained in compliance with establishedmore » engineering criteria. To achieve this objective, controls are to be established and implemented at predetermined points, and necessary action taken to prevent, detect, and correct any deficiencies.« less

  14. On the methodology of Engineering Geodesy

    NASA Astrophysics Data System (ADS)

    Brunner, Fritz K.

    2007-09-01

    Textbooks on geodetic surveying usually describe a very small number of principles which should provide the foundation of geodetic surveying. Here, the author argues that an applied field, such as engineering geodesy, has a methodology as foundation rather than a few principles. Ten methodological elements (ME) are identified: (1) Point discretisation of natural surfaces and objects, (2) distinction between coordinate and observation domain, (3) definition of reference systems, (4) specification of unknown parameters and desired precisions, (5) geodetic network and observation design, (6) quality control of equipment, (7) quality control of measurements, (8) establishment of measurement models, (9) establishment of parameter estimation models, (10) quality control of results. Each ME consists of a suite of theoretical developments, geodetic techniques and calculation procedures, which will be discussed. This paper is to be considered a first attempt at identifying the specific elements of the methodology of engineering geodesy. A better understanding of this methodology could lead to an increased objectivity, to a transformation of subjective practical experiences into objective working methods, and consequently to a new structure for teaching this rather diverse subject.

  15. Impact of service quality management (SQM) practices on Indian railways : study of South Central Railways.

    DOT National Transportation Integrated Search

    2010-09-01

    The main objective of this study is to present a framework developed for assisting Railways to monitor and : control the quality of services provided to passengers. The study evaluated the passenger Rail Service quality of : Indian Railways by develo...

  16. [Application of genetic algorithm in blending technology for extractions of Cortex Fraxini].

    PubMed

    Yang, Ming; Zhou, Yinmin; Chen, Jialei; Yu, Minying; Shi, Xiufeng; Gu, Xijun

    2009-10-01

    To explore the feasibility of genetic algorithm (GA) on multiple objective blending technology for extractions of Cortex Fraxini. According to that the optimization objective was the combination of fingerprint similarity and the root-mean-square error of multiple key constituents, a new multiple objective optimization model of 10 batches extractions of Cortex Fraxini was built. The blending coefficient was obtained by genetic algorithm. The quality of 10 batches extractions of Cortex Fraxini that after blending was evaluated with the finger print similarity and root-mean-square error as indexes. The quality of 10 batches extractions of Cortex Fraxini that after blending was well improved. Comparing with the fingerprint of the control sample, the similarity was up, but the degree of variation is down. The relative deviation of the key constituents was less than 10%. It is proved that genetic algorithm works well on multiple objective blending technology for extractions of Cortex Fraxini. This method can be a reference to control the quality of extractions of Cortex Fraxini. Genetic algorithm in blending technology for extractions of Chinese medicines is advisable.

  17. Three nights leg thermal therapy could improve sleep quality in patients with chronic heart failure.

    PubMed

    Sawatari, Hiroyuki; Nishizaka, Mari K; Miyazono, Mami; Ando, Shin-Ichi; Inoue, Shujiro; Takemoto, Masao; Sakamoto, Takafumi; Goto, Daisuke; Furumoto, Tomoo; Kinugawa, Shintaro; Hashiguchi, Nobuko; Rahmawati, Anita; Chishaki, Hiroaki; Ohkusa, Tomoko; Magota, Chie; Tsutsui, Hiroyuki; Chishaki, Akiko

    2018-02-01

    Sleep quality is often impaired in patients with chronic heart failure (HF), which may worsen their quality of life and even prognosis. Leg thermal therapy (LTT), topical leg warming, has been shown to improve endothelial function, oxidative stress, and cardiac function in patients with HF. However, its short-term influence to sleep quality has not been evaluated in HF patients. Eighteen of 23 patients with stable HF received LTT (15 min of warming at 45 °C and 30 min of insulation) at bedtime for 3 consecutive nights and 5 patients served as control. Subjective sleep quality was evaluated by St. Mary's Hospital Sleep Questionnaire, Oguri-Shirakawa-Azumi Sleep Inventory, and Epworth sleepiness scale, and also objectively evaluated by polysomnography. LTT significantly improved subjective sleep quality indicated by depth of sleep (p < 0.01), sleep duration (p < 0.05), number of awaking (p < 0.01), nap duration (p < 0.01), sleep quality (p < 0.05), and sleep satisfaction (p < 0.05). It was also objectively affirmed by a slight but significant decrease of sleep stage N1 (p < 0.01), and increase in sleep stage N2 (p < 0.05). No significant changes occurred in the controls. Hence, the short-term LTT could improve subjective and objective sleep quality in patients with HF. LTT can be a complimentary therapy to improve sleep quality in these patients.

  18. HPLC for quality control of polyimides

    NASA Technical Reports Server (NTRS)

    Young, P. R.; Sykes, G. F.

    1979-01-01

    High Pressure Liquid Chromatography (HPLC) as a quality control tool for polyimide resins and prepregs are presented. A data base to help establish accept/reject criteria for these materials was developed. This work is intended to supplement, not replace, standard quality control tests normally conducted on incoming resins and prepregs. To help achieve these objectives, the HPLC separation of LARC-160 polyimide precursor resin was characterized. Room temperature resin aging effects were studied. Graphite reinforced composites made from fresh and aged resin were fabricated and tested to determine if changes observed by HPLC were significant.

  19. Intercropping of oat and field pea in Alaska: an alternative approach to quality forage production and weed control

    USDA-ARS?s Scientific Manuscript database

    Intercropping of legumes with non-legumes is an ancient crop production method used to improve quality and dry matter (DM) yields of forage and grain, and to control weeds. However, there is little information regarding intercropping at high latitudes. The objectives of this field study were to eval...

  20. [Development of new approaches for objective dental tissue characteristiсs reproduction for preparation of highly aesthetical restoration].

    PubMed

    Makeeva, I M; Moskalev, E E; Kuz'ko, E I

    2010-01-01

    A new method of color quality control based on spectrophotometry has been developed for dental restoration. A comparative analysis of quality of subjective color control by trained and non-trained observers has been made. Based on comparative analysis of the results of subjective color-control and spectrophotometry the maximum amount of allowed color difference has been set (dE=2.8).

  1. A Control Law Design Method Facilitating Control Power, Robustness, Agility, and Flying Qualities Tradeoffs: CRAFT

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Davidson, John B.

    1998-01-01

    A multi-input, multi-output control law design methodology, named "CRAFT", is presented. CRAFT stands for the design objectives addressed, namely, Control power, Robustness, Agility, and Flying Qualities Tradeoffs. The methodology makes use of control law design metrics from each of the four design objective areas. It combines eigenspace assignment, which allows for direct specification of eigenvalues and eigenvectors, with a graphical approach for representing the metrics that captures numerous design goals in one composite illustration. Sensitivity of the metrics to eigenspace choice is clearly displayed, enabling the designer to assess the cost of design tradeoffs. This approach enhances the designer's ability to make informed design tradeoffs and to reach effective final designs. An example of the CRAFT methodology applied to an advanced experimental fighter and discussion of associated design issues are provided.

  2. Flight Tests of a Ministick Controller in an F/A-18 Airplane

    NASA Technical Reports Server (NTRS)

    Stoliker, Patrick C.; Carter, John

    2003-01-01

    In March of 1999, five pilots performed flight tests to evaluate the handling qualities of an F/A-18 research airplane equipped with a small-displacement center stick (ministick) controller that had been developed for the JAS 39 Gripen airplane (a fighter/attack/ reconnaissance airplane used by the Swedish air force). For these tests, the ministick was installed in the aft cockpit (see figure) and production support flight control computers (PSFCCs) were used as interfaces between the controller hardware and the standard F/A-18 flight-control laws. The primary objective of the flight tests was to assess any changes in handling qualities of the F/A-18 airplane attributable to the mechanical characteristics of the ministick. The secondary objective was to demonstrate the capability of the PSFCCs to support flight-test experiments.

  3. A robot control formalism based on an information quality concept

    NASA Technical Reports Server (NTRS)

    Ekman, A.; Torne, A.; Stromberg, D.

    1994-01-01

    A relevance measure based on Jaynes maximum entropy principle is introduced. Information quality is the conjunction of accuracy and relevance. The formalism based on information quality is developed for one-agent applications. The robot requires a well defined working environment where properties of each object must be accurately specified.

  4. The relationship between quality measurement techniques of pork loins and chops

    USDA-ARS?s Scientific Manuscript database

    Objectives: Assessment of boneless pork loin quality under industrial conditions is used in plants for segregation of product into programs and for export as well as for routine quality control and research. This assessment is usually made on the exposed longissimus on the ventral side of the muscle...

  5. An introduction to statistical process control in research proteomics.

    PubMed

    Bramwell, David

    2013-12-16

    Statistical process control is a well-established and respected method which provides a general purpose, and consistent framework for monitoring and improving the quality of a process. It is routinely used in many industries where the quality of final products is critical and is often required in clinical diagnostic laboratories [1,2]. To date, the methodology has been little utilised in research proteomics. It has been shown to be capable of delivering quantitative QC procedures for qualitative clinical assays [3] making it an ideal methodology to apply to this area of biological research. To introduce statistical process control as an objective strategy for quality control and show how it could be used to benefit proteomics researchers and enhance the quality of the results they generate. We demonstrate that rules which provide basic quality control are easy to derive and implement and could have a major impact on data quality for many studies. Statistical process control is a powerful tool for investigating and improving proteomics research work-flows. The process of characterising measurement systems and defining control rules forces the exploration of key questions that can lead to significant improvements in performance. This work asserts that QC is essential to proteomics discovery experiments. Every experimenter must know the current capabilities of their measurement system and have an objective means for tracking and ensuring that performance. Proteomic analysis work-flows are complicated and multi-variate. QC is critical for clinical chemistry measurements and huge strides have been made in ensuring the quality and validity of results in clinical biochemistry labs. This work introduces some of these QC concepts and works to bridge their use from single analyte QC to applications in multi-analyte systems. This article is part of a Special Issue entitled: Standardization and Quality Control in Proteomics. Copyright © 2013 The Author. Published by Elsevier B.V. All rights reserved.

  6. Quality control and quality assurance plan for bridge channel-stability assessments in Massachusetts

    USGS Publications Warehouse

    Parker, Gene W.; Pinson, Harlow

    1993-01-01

    A quality control and quality assurance plan has been implemented as part of the Massachusetts bridge scour and channel-stability assessment program. This program is being conducted by the U.S. Geological Survey, Massachusetts-Rhode Island District, in cooperation with the Massachusetts Highway Department. Project personnel training, data-integrity verification, and new data-management technologies are being utilized in the channel-stability assessment process to improve current data-collection and management techniques. An automated data-collection procedure has been implemented to standardize channel-stability assessments on a regular basis within the State. An object-oriented data structure and new image management tools are used to produce a data base enabling management of multiple data object classes. Data will be reviewed by assessors and data base managers before being merged into a master bridge-scour data base, which includes automated data-verification routines.

  7. Multi-criteria analysis for PM10 planning

    NASA Astrophysics Data System (ADS)

    Pisoni, Enrico; Carnevale, Claudio; Volta, Marialuisa

    To implement sound air quality policies, Regulatory Agencies require tools to evaluate outcomes and costs associated to different emission reduction strategies. These tools are even more useful when considering atmospheric PM10 concentrations due to the complex nonlinear processes that affect production and accumulation of the secondary fraction of this pollutant. The approaches presented in the literature (Integrated Assessment Modeling) are mainly cost-benefit and cost-effective analysis. In this work, the formulation of a multi-objective problem to control particulate matter is proposed. The methodology defines: (a) the control objectives (the air quality indicator and the emission reduction cost functions); (b) the decision variables (precursor emission reductions); (c) the problem constraints (maximum feasible technology reductions). The cause-effect relations between air quality indicators and decision variables are identified tuning nonlinear source-receptor models. The multi-objective problem solution provides to the decision maker a set of not-dominated scenarios representing the efficient trade-off between the air quality benefit and the internal costs (emission reduction technology costs). The methodology has been implemented for Northern Italy, often affected by high long-term exposure to PM10. The source-receptor models used in the multi-objective analysis are identified processing long-term simulations of GAMES multiphase modeling system, performed in the framework of CAFE-Citydelta project.

  8. Data-quality measures for stakeholder-implemented watershed-monitoring programs

    USGS Publications Warehouse

    Greve, Adrienne I.

    2002-01-01

    Community-based watershed groups, many of which collect environmental data, have steadily increased in number over the last decade. The data generated by these programs are often underutilized due to uncertainty in the quality of data produced. The incorporation of data-quality measures into stakeholder monitoring programs lends statistical validity to data. Data-quality measures are divided into three steps: quality assurance, quality control, and quality assessment. The quality-assurance step attempts to control sources of error that cannot be directly quantified. This step is part of the design phase of a monitoring program and includes clearly defined, quantifiable objectives, sampling sites that meet the objectives, standardized protocols for sample collection, and standardized laboratory methods. Quality control (QC) is the collection of samples to assess the magnitude of error in a data set due to sampling, processing, transport, and analysis. In order to design a QC sampling program, a series of issues needs to be considered: (1) potential sources of error, (2) the type of QC samples, (3) inference space, (4) the number of QC samples, and (5) the distribution of the QC samples. Quality assessment is the process of evaluating quality-assurance measures and analyzing the QC data in order to interpret the environmental data. Quality assessment has two parts: one that is conducted on an ongoing basis as the monitoring program is running, and one that is conducted during the analysis of environmental data. The discussion of the data-quality measures is followed by an example of their application to a monitoring program in the Big Thompson River watershed of northern Colorado.

  9. A Rotatable Quality Control Phantom for Evaluating the Performance of Flat Panel Detectors in Imaging Moving Objects.

    PubMed

    Haga, Yoshihiro; Chida, Koichi; Inaba, Yohei; Kaga, Yuji; Meguro, Taiichiro; Zuguchi, Masayuki

    2016-02-01

    As the use of diagnostic X-ray equipment with flat panel detectors (FPDs) has increased, so has the importance of proper management of FPD systems. To ensure quality control (QC) of FPD system, an easy method for evaluating FPD imaging performance for both stationary and moving objects is required. Until now, simple rotatable QC phantoms have not been available for the easy evaluation of the performance (spatial resolution and dynamic range) of FPD in imaging moving objects. We developed a QC phantom for this purpose. It consists of three thicknesses of copper and a rotatable test pattern of piano wires of various diameters. Initial tests confirmed its stable performance. Our moving phantom is very useful for QC of FPD images of moving objects because it enables visual evaluation of image performance (spatial resolution and dynamic range) easily.

  10. Food fortification: issues on quality assurance and impact evaluation in developing countries.

    PubMed

    Florentino, R

    2003-01-01

    Quality assurance and impact evaluation are essential components of a food fortification program and should be integrated in the fortification process. Quality assurance will ensure that the micronutrient meant to be delivered is indeed reaching the target population at the correct level. Impact evaluation will determine the effectiveness of food fortification as a strategy in controlling micronutrient deficiency and enable program planners to make decisions on the future of the program. In developing countries, both quality assurance and impact evaluation are often constrained not only by inadequacy of facilities as well as financial and manpower resources, but by unclear definition of objectives and inappropriate design. It is therefore necessary to consider the target audience for the quality assurance monitoring and impact evaluation in order to clearly define their objectives and in turn suit the design to these objectives, at the same time as the limitations in financial and manpower resources are considered.

  11. [The condition of the cardiovascular prevention in Spain].

    PubMed

    Royo-Bordonada, Miguel Ángel; Lobos, José Maria; Brotons, Carlos; Villar, Fernando; de Pablo, Carmen; Armario, Pedro; Cortés, Olga; Gil Nuñez, Antonio; Lizcano, Angel; de Santiago, Ana; Sans, Susana

    2014-01-07

    In Spain, where cardiovascular diseases are the leading cause of death, control of their risk factors is low. This study analyzes the implementation of cardiovascular risk (CVR) assessment in clinical practice and the existence of control objectives amongst quality care indicators and professional incentive systems. Between 2010 and 2011, data from each autonomous community were collected, by means of a specific questionnaire concerning prevalence and control of major CVR factors, CVR assessment, and implementation of control objectives amongst quality care indicators and primary care incentive systems. Fifteen out of 17 autonomous communities filled in the questionnaire. CVR was calculated through SCORE in 9 autonomous communities, REGICOR in 3 and Framingham in 3, covering 3.4 to 77.6% of target population. The resulting control of the main CVR factors was low and variable: hypertension (22.7-61.3%), dyslipidemia (11-45.1%), diabetes (18.5-84%) and smoking (20-50.5%). Most autonomous communities did not consider CVR assessment and control amongst quality care indicators or incentive systems, highlighting the lack of initiatives on lifestyles. Variability exists in cardiovascular prevention policies among autonomous communities. It is necessary to implement a common agreed cardiovascular prevention guide, to encourage physicians to implement CVR in electronic clinical history, and to promote CVR assessment and control inclusion amongst quality care indicators and professional incentive systems, focusing on lifestyles management. Copyright © 2012 Elsevier España, S.L. All rights reserved.

  12. Rapid toxicity detection in water quality control utilizing automated multispecies biomonitoring for permanent space stations

    NASA Technical Reports Server (NTRS)

    Morgan, E. L.; Young, R. C.; Smith, M. D.; Eagleson, K. W.

    1986-01-01

    The objective of this study was to evaluate proposed design characteristics and applications of automated biomonitoring devices for real-time toxicity detection in water quality control on-board permanent space stations. Simulated tests in downlinking transmissions of automated biomonitoring data to Earth-receiving stations were simulated using satellite data transmissions from remote Earth-based stations.

  13. Real Time Quality Control Methods for Cued EMI Data Collection

    DTIC Science & Technology

    2016-03-14

    contents be construed as reflecting the official policy or position of the Department of Defense. Reference herein to any specific commercial product...This project evaluated the effectiveness of in-field quality control (QC) procedures during cued electromagnetic induction (EMI) data collection. The...electromagnetic induction ESTCP Environmental Security Technology Certification Program hr hour ISO Industry Standard Object IVS Instrument

  14. The Quality of Care under a Managed-Care Program for Dual Eligibles

    ERIC Educational Resources Information Center

    Kane, Robert L.; Homyak, Patricia; Bershadsky, Boris; Lum, Terry; Flood, Shannon; Zhang, Hui

    2005-01-01

    Purpose: Our objective in this study was to compare the quality of care provided under the Minnesota Senior Health Options (MSHO), a special program designed to serve dually eligible older persons, to care provided to controls who received fee-for-service Medicare and Medicaid managed care. Design and Methods: Two control groups were used; one was…

  15. UrQt: an efficient software for the Unsupervised Quality trimming of NGS data.

    PubMed

    Modolo, Laurent; Lerat, Emmanuelle

    2015-04-29

    Quality control is a necessary step of any Next Generation Sequencing analysis. Although customary, this step still requires manual interventions to empirically choose tuning parameters according to various quality statistics. Moreover, current quality control procedures that provide a "good quality" data set, are not optimal and discard many informative nucleotides. To address these drawbacks, we present a new quality control method, implemented in UrQt software, for Unsupervised Quality trimming of Next Generation Sequencing reads. Our trimming procedure relies on a well-defined probabilistic framework to detect the best segmentation between two segments of unreliable nucleotides, framing a segment of informative nucleotides. Our software only requires one user-friendly parameter to define the minimal quality threshold (phred score) to consider a nucleotide to be informative, which is independent of both the experiment and the quality of the data. This procedure is implemented in C++ in an efficient and parallelized software with a low memory footprint. We tested the performances of UrQt compared to the best-known trimming programs, on seven RNA and DNA sequencing experiments and demonstrated its optimality in the resulting tradeoff between the number of trimmed nucleotides and the quality objective. By finding the best segmentation to delimit a segment of good quality nucleotides, UrQt greatly increases the number of reads and of nucleotides that can be retained for a given quality objective. UrQt source files, binary executables for different operating systems and documentation are freely available (under the GPLv3) at the following address: https://lbbe.univ-lyon1.fr/-UrQt-.html .

  16. Variability in cotton fiber yield, fiber quality, and soil properties in a southeastern coastal plain

    USDA-ARS?s Scientific Manuscript database

    To maximize profitability, cotton (GossypiumhirsutumL.) producers must attempt to control the quality of the crop while maximizing yield. The objective of this research was to measure the intrinsic variability present in cotton fiber yield and quality. The 0.5-ha experimental site was located in a...

  17. 78 FR 41075 - Federal Housing Administration (FHA): Single Family Quality Assurance-Solicitation of Information...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-09

    ... the efficiency and effectiveness of FHA's quality assurance process (QAP). The objective of FHA's QAP... control plan (QCP).\\1\\ A copy of the plan must be submitted by the lender when applying for FHA lender... processes: post-endorsement technical reviews, Quality Assurance Division reviews and targeted lender...

  18. Metrology: Measurement Assurance Program Guidelines

    NASA Technical Reports Server (NTRS)

    Eicke, W. G.; Riley, J. P.; Riley, K. J.

    1995-01-01

    The 5300.4 series of NASA Handbooks for Reliability and Quality Assurance Programs have provisions for the establishment and utilization of a documented metrology system to control measurement processes and to provide objective evidence of quality conformance. The intent of these provisions is to assure consistency and conformance to specifications and tolerances of equipment, systems, materials, and processes procured and/or used by NASA, its international partners, contractors, subcontractors, and suppliers. This Measurement Assurance Program (MAP) guideline has the specific objectives to: (1) ensure the quality of measurements made within NASA programs; (2) establish realistic measurement process uncertainties; (3) maintain continuous control over the measurement processes; and (4) ensure measurement compatibility among NASA facilities. The publication addresses MAP methods as applied within and among NASA installations and serves as a guide to: control measurement processes at the local level (one facility); conduct measurement assurance programs in which a number of field installations are joint participants; and conduct measurement integrity (round robin) experiments in which a number of field installations participate to assess the overall quality of particular measurement processes at a point in time.

  19. Movement quality of conventional prostheses and the DEKA Arm during everyday tasks

    PubMed Central

    Cowley, Jeffrey; Resnik, Linda; Wilken, Jason; Walters, Lisa Smurr; Gates, Deanna

    2017-01-01

    Background Conventional prosthetic devices fail to restore the function and characteristic movement quality of the upper limb. The DEKA Arm is a new, advanced prosthesis featuring a compound, powered wrist and multiple grip configurations. Objectives The purpose of this study was to determine if the DEKA Arm improved the movement quality of upper limb prosthesis users compared to conventional prostheses. Study design Case series. Methods Three people with transradial amputation completed tasks of daily life with their conventional prosthesis and with the DEKA Arm. A total of 10 healthy controls completed the same tasks. The trajectory of the wrist joint center was analyzed to determine how different prostheses affected movement duration, speed, smoothness, and curvature compared to patients’ own intact limbs and controls. Results Movement quality decreased with the DEKA Arm for two participants, and increased for the third. Prosthesis users made slower, less smooth, more curved movements with the prosthetic limb compared to the intact limb and controls, particularly when grasping and manipulating objects. Conclusion The effects of one month of training with the DEKA Arm on movement quality varied with participants’ skill and experience with conventional prostheses. Future studies should examine changes in movement quality after long-term use of advanced prostheses. PMID:26932980

  20. Data quality objectives for the initial fuel conditioning examinations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lawrence, L.A.

    The Data Quality Objectives (DQOs) were established for the response of the first group of fuel samples shipped from the K West Basin to the Hanford 327 Building hot cells for examinations to the proposed Path Forward conditioning process. Controlled temperature and atmosphere furnace testing testing will establish performance parameters using the conditioning process (drying, sludge drying, hydride decomposition passivation) proposed by the Independent Technical Assessment (ITA) Team as the baseline.

  1. 40 CFR 255.11 - Criteria for identifying agencies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... quality management planning agencies designated under section 208 of the Federal Water Pollution Control... State water quality management agencies. (d) Planning objectives will influence agency selection... IDENTIFICATION OF REGIONS AND AGENCIES FOR SOLID WASTE MANAGEMENT Criteria for Identifying Regions and Agencies...

  2. Effect on asphalt quality due to nighttime construction : final report.

    DOT National Transportation Integrated Search

    2017-06-01

    The objectives of this project were to identify and analyze the nighttime paving traffic control standards in other states and compare the effects of daytime vs. nighttime paving on quality, safety, costs, and construction time. Surveys of various De...

  3. Astronomical Instrumentation Systems Quality Management Planning: AISQMP

    NASA Astrophysics Data System (ADS)

    Goldbaum, Jesse

    2017-06-01

    The capability of small aperture astronomical instrumentation systems (AIS) to make meaningful scientific contributions has never been better. The purpose of AIS quality management planning (AISQMP) is to ensure the quality of these contributions such that they are both valid and reliable. The first step involved with AISQMP is to specify objective quality measures not just for the AIS final product, but also for the instrumentation used in its production. The next step is to set up a process to track these measures and control for any unwanted variation. The final step is continual effort applied to reducing variation and obtaining measured values near optimal theoretical performance. This paper provides an overview of AISQMP while focusing on objective quality measures applied to astronomical imaging systems.

  4. Astronomical Instrumentation Systems Quality Management Planning: AISQMP (Abstract)

    NASA Astrophysics Data System (ADS)

    Goldbaum, J.

    2017-12-01

    (Abstract only) The capability of small aperture astronomical instrumentation systems (AIS) to make meaningful scientific contributions has never been better. The purpose of AIS quality management planning (AISQMP) is to ensure the quality of these contributions such that they are both valid and reliable. The first step involved with AISQMP is to specify objective quality measures not just for the AIS final product, but also for the instrumentation used in its production. The next step is to set up a process to track these measures and control for any unwanted variation. The final step is continual effort applied to reducing variation and obtaining measured values near optimal theoretical performance. This paper provides an overview of AISQMP while focusing on objective quality measures applied to astronomical imaging systems.

  5. The Development of a Technical Conceptual Structure for the Concepts Possessed by Selected Quality Control Specialists. Report of a Research Project.

    ERIC Educational Resources Information Center

    Nee, John G.

    This project had as its specific objective the development and field testing of a procedure for identifying the structure of technical concepts possessed by a group of selected quality control specialists. The associative theory of verbal behavior served as the rationale by which conceptual structures depicted by graphical maps of technical…

  6. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Holladay, S.K.; Anderson, H.M.; Benson, S.B.

    Quality assurance (QA) objectives for Phase 2 were that (1) scientific data generated would withstand scientific and legal scrutiny; (2) data would be gathered using appropriate procedures for sample collection, sample handling and security, chain of custody, laboratory analyses, and data reporting; (3) data would be of known precision and accuracy; and (4) data would meet data quality objectives defined in the Phase 2 Sampling and Analysis Plan. A review of the QA systems and quality control (QC) data associated with the Phase 2 investigation is presented to evaluate whether the data were of sufficient quality to satisfy Phase 2more » objectives. The data quality indicators of precision, accuracy, representativeness, comparability, completeness, and sensitivity were evaluated to determine any limitations associated with the data. Data were flagged with qualifiers that were associated with appropriate reason codes and documentation relating the qualifiers to the reviewer of the data. These qualifiers were then consolidated into an overall final qualifier to represent the quality of the data to the end user. In summary, reproducible, precise, and accurate measurements consistent with CRRI objectives and the limitations of the sampling and analytical procedures used were obtained for the data collected in support of the Phase 2 Remedial Investigation.« less

  7. Development of an advanced pitch active control system for a wide body jet aircraft

    NASA Technical Reports Server (NTRS)

    Guinn, Wiley A.; Rising, Jerry J.; Davis, Walt J.

    1984-01-01

    An advanced PACS control law was developed for a commercial wide-body transport (Lockheed L-1011) by using modern control theory. Validity of the control law was demonstrated by piloted flight simulation tests on the NASA Langley visual motion simulator. The PACS design objective was to develop a PACS that would provide good flying qualities to negative 10 percent static stability margins that were equivalent to those of the baseline aircraft at a 15 percent static stability margin which is normal for the L-1011. Also, the PACS was to compensate for high-Mach/high-g instabilities that degrade flying qualities during upset recoveries and maneuvers. The piloted flight simulation tests showed that the PACS met the design objectives. The simulation demonstrated good flying qualities to negative 20 percent static stability margins for hold, cruise and high-speed flight conditions. Analysis and wind tunnel tests performed on other Lockheed programs indicate that the PACS could be used on an advanced transport configuration to provide a 4 percent fuel savings which results from reduced trim drag by flying at negative static stability margins.

  8. Do mobile phone base stations affect sleep of residents? Results from an experimental double-blind sham-controlled field study.

    PubMed

    Danker-Hopfe, Heidi; Dorn, Hans; Bornkessel, Christian; Sauter, Cornelia

    2010-01-01

    The aim of the present double-blind, sham-controlled, balanced randomized cross-over study was to disentangle effects of electromagnetic fields (EMF) and non-EMF effects of mobile phone base stations on objective and subjective sleep quality. In total 397 residents aged 18-81 years (50.9% female) from 10 German sites, where no mobile phone service was available, were exposed to sham and GSM (Global System for Mobile Communications, 900 MHz and 1,800 MHz) base station signals by an experimental base station while their sleep was monitored at their homes during 12 nights. Participants were randomly exposed to real (GSM) or sham exposure for five nights each. Individual measurement of EMF exposure, questionnaires on sleep disorders, overall sleep quality, attitude towards mobile communication, and on subjective sleep quality (morning and evening protocols) as well as objective sleep data (frontal EEG and EOG recordings) were gathered. Analysis of the subjective and objective sleep data did not reveal any significant differences between the real and sham condition. During sham exposure nights, objective and subjective sleep efficiency, wake after sleep onset, and subjective sleep latency were significantly worse in participants with concerns about possible health risks resulting from base stations than in participants who were not concerned. The study did not provide any evidence for short-term physiological effects of EMF emitted by mobile phone base stations on objective and subjective sleep quality. However, the results indicate that mobile phone base stations as such (not the electromagnetic fields) may have a significant negative impact on sleep quality. (c) 2010 Wiley-Liss, Inc.

  9. Genetic mapping of FAD2 genes and their relative contribution towards oil quality in peanut (Arachis hypogaea L.)

    USDA-ARS?s Scientific Manuscript database

    Improvement of oil quality is the major research objective in peanut because of its high economic impact on growers/traders and several health benefits to consumers. Fatty acid desaturase (FAD) genes are known to control quality traits but their position on the peanut genome and their relative contr...

  10. Objective Speech Quality Assessment Based on Payload Discrimination of Lost Packets for Cellular Phones in NGN Environment

    NASA Astrophysics Data System (ADS)

    Uemura, Satoshi; Fukumoto, Norihiro; Yamada, Hideaki; Nakamura, Hajime

    A feature of services provided in a Next Generation Network (NGN) is that the end-to-end quality is guaranteed. This is quite a challenging issue, given the considerable fluctuation in network conditions within a Fixed Mobile Convergence (FMC) network. Therefore, a novel approach, whereby a network node and a mobile terminal such as a cellular phone cooperate with each other to control service quality is essential. In order to achieve such cooperation, the mobile terminal needs to become more intelligent so it can estimate the service quality, including the user's perceptual quality, and notify the measurement result to the network node. Subsequently, the network node implements some kind of service control function, such as a resource and admission control function, based on the notification from the mobile terminal. In this paper, the role of the mobile terminal in such collaborative system is focused on. As a part of a QoS/QoE measurement system, we describe an objective speech quality assessment with payload discrimination of lost packets to measure the user's perceptual quality of VoIP. The proposed assessment is so simple that it can be implemented on a cellular phone. We therefore did this as part of the QoS/QoE measurement system. By using the implemented system, we can measure the user's perceptual quality of VoIP as well as the network QoS metrics, in terms of criteria such as packet loss rate, jitter and burstiness in real time.

  11. 12 CFR 652.60 - Corporation board guidelines.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... (a) Your board of directors is responsible for ensuring that you maintain total capital at a level... developing the capital adequacy plan: (1) Capability of management; (2) Strategies and objectives in your business plan; (3) Quality of operating policies, procedures, and internal controls; (4) Quality and...

  12. 12 CFR 652.60 - Corporation board guidelines.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... (a) Your board of directors is responsible for ensuring that you maintain total capital at a level... developing the capital adequacy plan: (1) Capability of management; (2) Strategies and objectives in your business plan; (3) Quality of operating policies, procedures, and internal controls; (4) Quality and...

  13. Distributed sensor architecture for intelligent control that supports quality of control and quality of service.

    PubMed

    Poza-Lujan, Jose-Luis; Posadas-Yagüe, Juan-Luis; Simó-Ten, José-Enrique; Simarro, Raúl; Benet, Ginés

    2015-02-25

    This paper is part of a study of intelligent architectures for distributed control and communications systems. The study focuses on optimizing control systems by evaluating the performance of middleware through quality of service (QoS) parameters and the optimization of control using Quality of Control (QoC) parameters. The main aim of this work is to study, design, develop, and evaluate a distributed control architecture based on the Data-Distribution Service for Real-Time Systems (DDS) communication standard as proposed by the Object Management Group (OMG). As a result of the study, an architecture called Frame-Sensor-Adapter to Control (FSACtrl) has been developed. FSACtrl provides a model to implement an intelligent distributed Event-Based Control (EBC) system with support to measure QoS and QoC parameters. The novelty consists of using, simultaneously, the measured QoS and QoC parameters to make decisions about the control action with a new method called Event Based Quality Integral Cycle. To validate the architecture, the first five Braitenberg vehicles have been implemented using the FSACtrl architecture. The experimental outcomes, demonstrate the convenience of using jointly QoS and QoC parameters in distributed control systems.

  14. Distributed Sensor Architecture for Intelligent Control that Supports Quality of Control and Quality of Service

    PubMed Central

    Poza-Lujan, Jose-Luis; Posadas-Yagüe, Juan-Luis; Simó-Ten, José-Enrique; Simarro, Raúl; Benet, Ginés

    2015-01-01

    This paper is part of a study of intelligent architectures for distributed control and communications systems. The study focuses on optimizing control systems by evaluating the performance of middleware through quality of service (QoS) parameters and the optimization of control using Quality of Control (QoC) parameters. The main aim of this work is to study, design, develop, and evaluate a distributed control architecture based on the Data-Distribution Service for Real-Time Systems (DDS) communication standard as proposed by the Object Management Group (OMG). As a result of the study, an architecture called Frame-Sensor-Adapter to Control (FSACtrl) has been developed. FSACtrl provides a model to implement an intelligent distributed Event-Based Control (EBC) system with support to measure QoS and QoC parameters. The novelty consists of using, simultaneously, the measured QoS and QoC parameters to make decisions about the control action with a new method called Event Based Quality Integral Cycle. To validate the architecture, the first five Braitenberg vehicles have been implemented using the FSACtrl architecture. The experimental outcomes, demonstrate the convenience of using jointly QoS and QoC parameters in distributed control systems. PMID:25723145

  15. [The comprehensive approach to ensure the quality of forensic medical examination of a cadaver].

    PubMed

    Mel'nikov, O V; Mal'tsev, A E; Petrov, S B; Petrov, B A

    2015-01-01

    The objective of the present work was to estimate the effectiveness of the comprehensive monitoring system designed to enhance the quality of forensic medical expertise for determining the cause of death in the hanging cases. It was shown that the practical application of the algorithmization and automated quality control system improves the effectiveness of forensic medical examination of the cadavers in the hanging cases. The system performs the control, directing, and teaching functions. Moreover, it allows to estimate the completeness of the examination of the cadaver.

  16. Narcissism and relational representations among psychiatric outpatients.

    PubMed

    Kealy, David; Ogrodniczuk, John S; Joyce, Anthony S; Steinberg, Paul I; Piper, William E

    2015-06-01

    Pathological narcissism is associated with maladaptive interpersonal behavior, although less is known regarding the internal relational representations of narcissistic patients. The authors examined the relationship between pathological narcissism and two constructs that reflect internal representations of relational patterns: quality of object relations and attachment style. Patients attending a psychiatric day treatment program (N = 218) completed measures of narcissism, general psychiatric distress, and attachment style in terms of attachment avoidance and anxiety. A semistructured interview was used to assess quality of object relations. Multiple regression analysis was conducted, controlling for general psychiatric distress. Pathological narcissism was associated with anxious attachment, but not with avoidant attachment. Narcissism was also associated with lower levels of quality of object relations. The implications of these results are discussed in terms of internal representations of self-other relations.

  17. Stochastic control approaches for sensor management in search and exploitation

    NASA Astrophysics Data System (ADS)

    Hitchings, Darin Chester

    Recent improvements in the capabilities of autonomous vehicles have motivated their increased use in such applications as defense, homeland security, environmental monitoring, and surveillance. To enhance performance in these applications, new algorithms are required to control teams of robots autonomously and through limited interactions with human operators. In this dissertation we develop new algorithms for control of robots performing information-seeking missions in unknown environments. These missions require robots to control their sensors in order to discover the presence of objects, keep track of the objects, and learn what these objects are, given a fixed sensing budget. Initially, we investigate control of multiple sensors, with a finite set of sensing options and finite-valued measurements, to locate and classify objects given a limited resource budget. The control problem is formulated as a Partially Observed Markov Decision Problem (POMDP), but its exact solution requires excessive computation. Under the assumption that sensor error statistics are independent and time-invariant, we develop a class of algorithms using Lagrangian Relaxation techniques to obtain optimal mixed strategies using performance bounds developed in previous research. We investigate alternative Receding Horizon (RH) controllers to convert the mixed strategies to feasible adaptive-sensing strategies and evaluate the relative performance of these controllers in simulation. The resulting controllers provide superior performance to alternative algorithms proposed in the literature and obtain solutions to large-scale POMDP problems several orders of magnitude faster than optimal Dynamic Programming (DP) approaches with comparable performance quality. We extend our results for finite action, finite measurement sensor control to scenarios with moving objects. We use Hidden Markov Models (HMMs) for the evolution of objects, according to the dynamics of a birth-death process. We develop a new lower bound on the performance of adaptive controllers in these scenarios, develop algorithms for computing solutions to this lower bound, and use these algorithms as part of a RH controller for sensor allocation in the presence of moving objects We also consider an adaptive Search problem where sensing actions are continuous and the underlying measurement space is also continuous. We extend our previous hierarchical decomposition approach based on performance bounds to this problem and develop novel implementations of Stochastic Dynamic Programming (SDP) techniques to solve this problem. Our algorithms are nearly two orders of magnitude faster than previously proposed approaches and yield solutions of comparable quality. For supervisory control, we discuss how human operators can work with and augment robotic teams performing these tasks. Our focus is on how tasks are partitioned among teams of robots and how a human operator can make intelligent decisions for task partitioning. We explore these questions through the design of a game that involves robot automata controlled by our algorithms and a human supervisor that partitions tasks based on different levels of support information. This game can be used with human subject experiments to explore the effect of information on quality of supervisory control.

  18. Field Performance of High-Quality and Standard Northern Red Oak Seedlings in Tennessee

    Treesearch

    David S. Buckley

    2002-01-01

    First-year performance of high-quality (HQ), high-quality cull (HQC) and standard (ST) northern red oak (Quercus rubra) nursery seedlings was compared in a study established in a recent clearcut in mid-March, 2000. Objectives were to test effects of 1) seedling type, 2) planting treatment, and 3) control of competitors on the growth, browsing, and...

  19. Cognitive Networks

    DTIC Science & Technology

    2007-06-15

    13 2.1.3 Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.2 Related Efforts...objectives such as resource management, Quality of Service (QoS), security, or access control. The limitations of CN applications should come from the...achieving the best mode of operation in an SDR. 2.1.3 Quality of Service There has been a lot of research on how to define a QoS architecture for the

  20. No improvements in postnatal dietary outcomes were apparent in a two-arm, randomized, controlled, comparative impact trial targeting rural, Southern, African American women

    USDA-ARS?s Scientific Manuscript database

    Objective: The primary objective was to determine if postnatal diet quality scores of participants in the two treatment arms differed or changed over time. The secondary objectives were to determine if postnatal psychosocial constructs related to diet differed in the two treatment arms, changed ov...

  1. Applications of flight control system methods to an advanced combat rotorcraft

    NASA Technical Reports Server (NTRS)

    Tischler, Mark B.; Fletcher, Jay W.; Morris, Patrick M.; Tucker, George T.

    1989-01-01

    Advanced flight control system design, analysis, and testing methodologies developed at the Ames Research Center are applied in an analytical and flight test evaluation of the Advanced Digital Optical Control System (ADOCS) demonstrator. The primary objectives are to describe the knowledge gained about the implications of digital flight control system design for rotorcraft, and to illustrate the analysis of the resulting handling-qualities in the context of the proposed new handling-qualities specification for rotorcraft. Topics covered in-depth are digital flight control design and analysis methods, flight testing techniques, ADOCS handling-qualities evaluation results, and correlation of flight test results with analytical models and the proposed handling-qualities specification. The evaluation of the ADOCS demonstrator indicates desirable response characteristics based on equivalent damping and frequency, but undersirably large effective time-delays (exceeding 240 m sec in all axes). Piloted handling-qualities are found to be desirable or adequate for all low, medium, and high pilot gain tasks; but handling-qualities are inadequate for ultra-high gain tasks such as slope and running landings.

  2. Evaluating the Accuracy of Common Runoff Estimation Methods for New Impervious Hot-Mix Asphalt

    EPA Science Inventory

    Accurately predicting runoff volume from impervious surfaces for water quality design events (e.g., 25.4 mm) is important for sizing green infrastructure stormwater control measures to meet water quality and infiltration design targets. The objective of this research was to quan...

  3. Performance-based quality assurance/quality control (QA/QC) acceptance procedures for in-place soil testing phase 3.

    DOT National Transportation Integrated Search

    2015-01-01

    One of the objectives of this study was to evaluate soil testing equipment based on its capability of measuring in-place stiffness or modulus values. : As design criteria transition from empirical to mechanistic-empirical, soil test methods and equip...

  4. A pilot randomized controlled trial of on-line interventions to improve sleep quality in adults after mild or moderate traumatic brain injury.

    PubMed

    Theadom, Alice; Barker-Collo, Suzanne; Jones, Kelly; Dudley, Margaret; Vincent, Norah; Feigin, Valery

    2018-05-01

    To explore feasibility and potential efficacy of on-line interventions for sleep quality following a traumatic brain injury (TBI). A two parallel-group, randomized controlled pilot study. Community-based. In all, 24 participants (mean age: 35.9 ± 11.8 years) who reported experiencing sleep difficulties between 3 and 36 months after a mild or moderate TBI. Participants were randomized to receive either a cognitive behaviour therapy or an education intervention on-line. Both interventions were self-completed for 20-30 minutes per week over a six-week period. The Pittsburgh Sleep Quality Index assessed self-reported sleep quality with actigraphy used as an objective measure of sleep quality. The CNS Vital Signs on-line neuropsychological test assessed cognitive functioning and the Rivermead Post-concussion Symptoms and Quality of Life after Brain Injury questionnaires were completed pre and post intervention. Both programmes demonstrated feasibility for use post TBI, with 83.3% of participants completing the interventions. The cognitive behaviour therapy group experienced significant reductions ( F = 5.47, p = 0.04) in sleep disturbance (mean individual change = -4.00) in comparison to controls post intervention (mean individual change = -1.50) with a moderate effect size of 1.17. There were no significant group differences on objective sleep quality, cognitive functioning, post-concussion symptoms or quality of life. On-line programmes designed to improve sleep are feasible for use for adults following mild-to-moderate TBI. Based on the effect size identified in this pilot study, 128 people (64 per group) would be needed to determine clinical effectiveness.

  5. An Art Information System: From Integration to Interpretation.

    ERIC Educational Resources Information Center

    Barnett, Patricia J.

    1988-01-01

    Explores the qualities of bibliographic and object entities that contribute to the similarities and differences in the data describing them and the possibility of cooperation between indexers of art objects and indexers of bibliographic information. The discussion covers the role of authority control as the linking component between bibliographic…

  6. Methods for collecting benthic invertebrate samples as part of the National Water-Quality Assessment Program

    USGS Publications Warehouse

    Cuffney, Thomas F.; Gurtz, Martin E.; Meador, Michael R.

    1993-01-01

    Benthic invertebrate communities are evaluated as part of the ecological survey component of the U.S. Geological Survey's National Water-Quality Assessment Program. These biological data are collected along with physical and chemical data to assess water-quality conditions and to develop an understanding of the factors that affect water-quality conditions locally, regionally, and nationally. The objectives of benthic invertebrate community characterizations are to (1) develop for each site a list of tax a within the associated stream reach and (2) determine the structure of benthic invertebrate communities within selected habitats of that reach. A nationally consistent approach is used to achieve these objectives. This approach provides guidance on site, reach, and habitat selection and methods and equipment for qualitative multihabitat sampling and semi-quantitative single habitat sampling. Appropriate quality-assurance and quality-control guidelines are used to maximize the ability to analyze data within and among study units.

  7. Objective Versus Subjective Measures of Executive Functions: Predictors of Participation and Quality of Life in Parkinson Disease?

    PubMed

    Vlagsma, Thialda T; Koerts, Janneke; Tucha, Oliver; Dijkstra, Hilde T; Duits, Annelien A; van Laar, Teus; Spikman, Jacoba M

    2017-11-01

    To determine whether objective (neuropsychological tests) and subjective measures (questionnaires) of executive functions (EFs) are associated in patients with Parkinson disease (PD), and to determine to what extent level of participation and quality of life (QoL) of patients with PD can be predicted by these measures of EFs. Correlational research design (case-control and prediction design). Departments of neuropsychology of 3 medical centers. A sample (N=136) of patients with PD (n=42) and their relatives, and controls without PD (n=94). Not applicable. A test battery measuring EFs. In addition, patients, their relatives, and controls completed the Dysexecutive Questionnaire, Brock Adaptive Functioning Questionnaire, and Barkley Deficits in Executive Functioning Scale - time management questionnaires measuring complaints about EFs. Participation and QoL were measured with the Impact on Participation and Autonomy scale and the Parkinson's Disease Questionnaire-39, respectively. Patients with PD showed impairments in EFs on objective tests and reported significantly more complaints about EFs than did controls without PD. No associations were found between patients' performances on objective and subjective measures of EFs. However, both objective and subjective measures predicted patients' level of participation. In addition, subjective measures of EFs predicted QoL in patients with PD. These findings show that objective and subjective measures of EFs are not interchangeable and that both approaches predict level of participation and QoL in patients with PD. However, within this context, sex needs to be taken into account. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  8. Optimizing cinefilm.

    PubMed

    Kato, W; Wong, M

    1975-01-01

    A system for improving the quality of cinefilm and for maintaining quality control is described. Objective criteria for contrast, resolution, and grain structure were established to measure the effects of varying X-ray dose, f-stop, development temperature, and selection of film and developer. We found that all variables nust be adjusted to maximize the viewing quality and that similar denisty curves can be achieved, independently of the choice of film and developer.

  9. Guidance for the Development of Air Force Storm Water Sampling Programs

    DTIC Science & Technology

    1993-09-01

    38 Storm Water Quality Monitoring ................. 39 Determining Flow Rate ....................... 42 Weirs and Flumes... water quality monitoring it is not possible to analyze the entire nmoff from a drainage basin. The objective of water quality sampling is to collect a...development of storm water pollution prevention plans. Best management practices can also be developed to control the pollution sources identified. In storm

  10. Choice of mathematical models for technological process of glass rod drawing

    NASA Astrophysics Data System (ADS)

    Alekseeva, L. B.

    2017-10-01

    The technological process of drawing glass rods (light guides) is considered. Automated control of the drawing process is reduced to the process of making decisions to ensure a given quality. The drawing process is considered as a control object, including the drawing device (control device) and the optical fiber forming zone (control object). To study the processes occurring in the formation zone, mathematical models are proposed, based on the continuum mechanics basics. To assess the influence of disturbances, a transfer function is obtained from the basis of the wave equation. Obtaining the regression equation also adequately describes the drawing process.

  11. Using Actigraphy and mHealth Systems for an Objective Analysis of Sleep Quality on Systemic Lupus Erythematosus Patients.

    PubMed

    Balderas-Díaz, Sara; Martínez, M Pilar; Guerrero-Contreras, Gabriel; Miró, Elena; Benghazi, Kawtar; Sánchez, Ana I; Garrido, José Luis; Prados, Germán

    2017-03-23

    Although sleep alterations can be an important factor contributing to the clinical state of Systemic Lupus Erythematosus, there are no studies to adequately assess sleep quality in this type of disease. The aim of this work is to analyse the sleep quality of Systemic Lupus Erythematous (SLE) patients based on more objective information provided by actigraphy and mobile systems. The idea is to carry out a comprehensive study by analysing how environmental conditions and factors can affect sleep quality. In traditional methods the information for assessing sleep quality is obtained through questionnaires. In this work, a novel method is proposed by combining these questionnaires that provide valuable but subjective information with actigraphy and a mobile system to collect more objective information about the patient and their environment. The method provides mechanisms to detect how sleep hygiene could be associated directly with the sleep quality of the subjects, in order to provide a custom intervention to SLE patients. Moreover, this alternative provides ease of use, and non-intrusive ICT (Information and Communication Technology) through a wristband and a mHealth system. The mHealth system has been developed for environmental conditions sensing. This consists of a mobile device with built-in sensors providing input data about the bedroom environment during sleep, and a set of services of the Environmental Monitoring System for properly managing the configuration, registration and fusion of those input data. In previous studies, this information has never been taken into account. However, the information could be relevant in the case of SLE patients. The sample is composed of 9 women with SLE and 11 matched controls with a mean age of 35.78 and 32.18, respectively. Demographic and clinical variables between SLE patients and healthy controls are compared using the Fisher exact test and the Mann-Whitney U test. Relationships between psychological variables, actigraphy measures, and variables related to environmental conditions are analysed with Spearman's rank correlation coefficient. The SLE group showed poorer sleep quality, and more pain intensity, fatigue and depression than the healthy controls. Significant differences between SLE women and healthy controls in measures of actigraphy were not found. However, the fusion of the measures of the environmental conditions that were collected by the mobile system and actigraphy, has shown that light, and more specifically temperature have a direct relation with several measures of actigraphy which are related to sleep quality. It should be emphasize this result because usually the sleep problems are assessment through self-reported measures which had not revealed this association. Moreover, there are no previous studies that analyse these aspects in bedroom environments of SLE patients directly from objective measures. The results indicate the need to complement the subjective evaluation of sleep with objective measures. The use of actigraphy in combination with a new mHealth system provides a complete assessment especially relevant to chronic conditions as SLE. Both systems incorporate this objective information directly from objective measures in a non-intrusive way. Moreover, the measures of bedroom environmental variables provide useful and relevant clinical information to assess what is happening daily and not occasionally. This could lead to more customized interventions and adapt the treatment to each individual.

  12. PSO Algorithm for an Optimal Power Controller in a Microgrid

    NASA Astrophysics Data System (ADS)

    Al-Saedi, W.; Lachowicz, S.; Habibi, D.; Bass, O.

    2017-07-01

    This paper presents the Particle Swarm Optimization (PSO) algorithm to improve the quality of the power supply in a microgrid. This algorithm is proposed for a real-time selftuning method that used in a power controller for an inverter based Distributed Generation (DG) unit. In such system, the voltage and frequency are the main control objectives, particularly when the microgrid is islanded or during load change. In this work, the PSO algorithm is implemented to find the optimal controller parameters to satisfy the control objectives. The results show high performance of the applied PSO algorithm of regulating the microgrid voltage and frequency.

  13. Objective and Subjective Socioeconomic Gradients Exist for Sleep Quality, Sleep Latency, Sleep Duration, Weekend Oversleep, and Daytime Sleepiness in Adults

    PubMed Central

    Jarrin, Denise Christina; McGrath, Jennifer J.; Silverstein, Janice E.; Drake, Christopher

    2017-01-01

    Socioeconomic gradients exist for multiple health outcomes. Lower objective socioeconomic position (SEP), whether measured by income, education, or occupation, is associated with inadequate sleep. Less is known about whether one’s perceived ranking of their social status, or subjective SEP, affects sleep. This study examined whether a subjective socioeconomic gradient exists for sleep while controlling for objective SEP. Participants (N = 177; age, M = 45.3 years, SD = 6.3 years) completed the Pittsburgh Sleep Quality Index, Epworth Sleepiness Scale, MacArthur Ladder, and other self-report measures to assess sleep and objective SEP. Subjective SEP trumped objective SEP as a better predictor of sleep duration, daytime sleepiness, and weekend oversleep. These findings highlight the need to expand our framework to better understand the mechanisms underlying socioeconomic gradients and sleep. PMID:23136841

  14. Quality of Life in Patients with Neurocysticercosis in Mexico

    PubMed Central

    Bhattarai, Rachana; Budke, Christine M.; Carabin, Hélène; Proaño, Jefferson V.; Flores-Rivera, Jose; Corona, Teresa; Cowan, Linda D.; Ivanek, Renata; Snowden, Karen F.; Flisser, Ana

    2011-01-01

    The objective of this study was to compare quality of life measures in patients with neurocysticercosis (NCC) to those of a matched control group. The NCC outpatients and their controls were recruited from two neurology referral hospitals in Mexico City, Mexico during 2007–2008. The quality of life of 224 NCC patients was compared with 224 age-sex-hospital-day matched controls using the short form 12 v2 (SF-12 v2) quality of life survey. Medical chart reviews were also conducted for the NCC outpatients to evaluate presenting clinical manifestations. Compared with the controls, NCC patients had a significantly lower score for each of the eight domains of health evaluated and significantly lower Physical and Mental Component Summary scores. Chart reviews indicated that hydrocephalus (48%), severe headaches (47%), and epilepsy (31%) were the most common clinical manifestations in these NCC outpatients. PMID:21540389

  15. Preparation and Quality Control of 68Ga-Citrate for PET Applications

    PubMed Central

    Aghanejad, Ayuob; Jalilian, Amir Reza; Ardaneh, Khosro; Bolourinovin, Fatemeh; Yousefnia, Hassan; Samani, Ali Bahrami

    2015-01-01

    Objective(s): In nuclear medicine studies, gallium-68 (8Ga) citrate has been recently known as a suitable infection agent in positron emission tomography (PET). In this study, by applying an in-house produced 68Ge/68Ga generator, a simple technique for the synthesis and quality control of 68Ga-citrate was introduced; followed by preliminary animal studies. Methods: 68GaCl3 eluted from the generator was studied in terms of quality control factors including radiochemical purity (assessed by HPLC and RTLC), chemical purity (assessed by ICP-EOS), radionuclide purity (evaluated by HPGe), and breakthrough. 68Ga-citrate was prepared from eluted 68GaCl3 and sodium citrate under various reaction conditions. Stability of the complex was evaluated in human serum for 2 h at 370C, followed by biodistribution studies in rats for 120 min. Results: 68Ga-citrate was prepared with acceptable radiochemical purity (>97 ITLC and >98% HPLC), specific activity (4-6 GBq/mM), chemical purity (Sn, Fe<0.3 ppm and Zn<0.2 ppm) within 15 min at 500C. The biodistribution of 68Ga-citrate was consistent with former reports up to 120 minutes. Conclusion: This study demonstrated the possible in-house preparation and quality control of 68Ga-citrate, using a commercially available 68Ge/68Ga generator for PET imaging throughout the country. PMID:27408889

  16. Enhanced power quality based single phase photovoltaic distributed generation system

    NASA Astrophysics Data System (ADS)

    Panda, Aurobinda; Pathak, M. K.; Srivastava, S. P.

    2016-08-01

    This article presents a novel control strategy for a 1-ϕ 2-level grid-tie photovoltaic (PV) inverter to enhance the power quality (PQ) of a PV distributed generation (PVDG) system. The objective is to obtain the maximum benefits from the grid-tie PV inverter by introducing current harmonics as well as reactive power compensation schemes in its control strategy, thereby controlling the PV inverter to achieve multiple functions in the PVDG system such as: (1) active power flow control between the PV inverter and the grid, (2) reactive power compensation, and (3) grid current harmonics compensation. A PQ enhancement controller (PQEC) has been designed to achieve the aforementioned objectives. The issue of underutilisation of the PV inverter in nighttime has also been addressed in this article and for the optimal use of the system; the PV inverter is used as a shunt active power filter in nighttime. A prototype model of the proposed system is developed in the laboratory, to validate the effectiveness of the control scheme, and is tested with the help of the dSPACE DS1104 platform.

  17. Post-examination interpretation of objective test data: monitoring and improving the quality of high-stakes examinations--a commentary on two AMEE Guides.

    PubMed

    Tavakol, Mohsen; Dennick, Reg

    2012-01-01

    As great emphasis is rightly placed upon the importance of assessment to judge the quality of our future healthcare professionals, it is appropriate not only to choose the most appropriate assessment method, but to continually monitor the quality of the tests themselves, in a hope that we may continually improve the process. This article stresses the importance of quality control mechanisms in the exam cycle and briefly outlines some of the key psychometric concepts including reliability measures, factor analysis, generalisability theory and item response theory. The importance of such analyses for the standard setting procedures is emphasised. This article also accompanies two new AMEE Guides in Medical Education (Tavakol M, Dennick R. Post-examination Analysis of Objective Tests: AMEE Guide No. 54 and Tavakol M, Dennick R. 2012. Post examination analysis of objective test data: Monitoring and improving the quality of high stakes examinations: AMEE Guide No. 66) which provide the reader with practical examples of analysis and interpretation, in order to help develop valid and reliable tests.

  18. Testing the quality of images for permanent magnet desktop MRI systems using specially designed phantoms.

    PubMed

    Qiu, Jianfeng; Wang, Guozhu; Min, Jiao; Wang, Xiaoyan; Wang, Pengcheng

    2013-12-21

    Our aim was to measure the performance of desktop magnetic resonance imaging (MRI) systems using specially designed phantoms, by testing imaging parameters and analysing the imaging quality. We designed multifunction phantoms with diameters of 18 and 60 mm for desktop MRI scanners in accordance with the American Association of Physicists in Medicine (AAPM) report no. 28. We scanned the phantoms with three permanent magnet 0.5 T desktop MRI systems, measured the MRI image parameters, and analysed imaging quality by comparing the data with the AAPM criteria and Chinese national standards. Image parameters included: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, signal-to-noise ratio (SNR), and image uniformity. The image parameters of three desktop MRI machines could be measured using our specially designed phantoms, and most parameters were in line with MRI quality control criterion, including: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, image uniformity and slice position accuracy. However, SNR was significantly lower than in some references. The imaging test and quality control are necessary for desktop MRI systems, and should be performed with the applicable phantom and corresponding standards.

  19. Remedial investigation/feasibility study for the Clinch River/Poplar Creek operable unit. Volume 5. Appendixes G, H, I, J

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-09-01

    The Quality Assurance/Quality Control (QA/QC) Program for Phase 2 of the Clinch River Remedial Investigation (CRRI) was designed to comply with both Department of Energy (DOE) Order 5700.6C and Environmental Protection Agency (EPA) QAMS-005/80 (EPA 1980a) guidelines. QA requirements and the general QA objectives for Phase 2 data were defined in the Phase 2 Sampling and Analysis Plan (SAP)-Quality Assurance Project Plan, and scope changes noted in the Phase 2 Sampling and Analysis Plan Addendum. The QA objectives for Phase 2 data were the following: (1) Scientific data generated will withstand scientific and legal scrutiny. (2) Data will be gatheredmore » using appropriate procedures for sample collection, sample handling and security, chain of custody (COC), laboratory analyses, and data reporting. (3) Data will be of known precision and accuracy. (4) Data will meet data quality objectives (DQOs) defined in the Phase 2 SAP.« less

  20. Relationship between sleep and pain in adolescents with juvenile primary fibromyalgia syndrome.

    PubMed

    Olsen, Margaret N; Sherry, David D; Boyne, Kathleen; McCue, Rebecca; Gallagher, Paul R; Brooks, Lee J

    2013-04-01

    To investigate sleep quality in adolescents with juvenile primary fibromyalgia syndrome (JPFS) and determine whether sleep abnormalities, including alpha-delta sleep (ADS), correlate with pain intensity. We hypothesized that successful treatment for pain with exercise therapy would reduce ADS and improve sleep quality. Single-center preintervention and postintervention (mean = 5.7 ± 1.0 weeks; range = 4.0-7.3 weeks) observational study. Ten female adolescents (mean age = 16.2 ± 0.65 SD yr) who met criteria for JPFS and completed treatment. Multidisciplinary pain treatment, including intensive exercise therapy. Pain and disability were measured by a pain visual analog scale (VAS) and the functional disability inventory. Subjective sleep measures included a sleep VAS, an energy VAS, and the School Sleep Habits Survey. Objective sleep measures included actigraphy, polysomnography (PSG), and the Multiple Sleep Latency Test. Baseline PSG was compared with that of healthy age- and sex-matched control patients. At baseline, patients had poorer sleep efficiency, more arousals/awakenings, and more ADS (70.3% of total slow wave sleep [SWS] versus 21.9% SWS, P = 0.002) than controls. ADS was unrelated to pain, disability, or subjective sleep difficulty. After treatment, pain decreased (P = 0.000) and subjective sleep quality improved (P = 0.008). Objective sleep quality, including the amount of ADS, did not change. Although perceived sleep quality improved in adolescents with JPFS after treatment, objective measures did not. Our findings do not suggest exercise therapy for pain improves sleep by reducing ADS, nor do they support causal relationships between ADS and chronic pain or subjective sleep quality.

  1. Nuclear Technology. Course 28: Welding Inspection. Module 28-1, Welding Fundamentals and Processes.

    ERIC Educational Resources Information Center

    Espy, John

    This first in a series of ten modules for a course titled Welding Inspection describes the role and responsbilities of the quality assurance/quality control technician in welding inspections. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4) notes to…

  2. Nuclear Technology. Course 31: Quality Assurance Practices. Module 31-5, Nonconforming Materials.

    ERIC Educational Resources Information Center

    Pritchard, Jim; Espy, John

    This fifth in a series of eight modules for a course titled Quality Assurance Practices describes the essential elements of a nonconforming material control system, including purpose and application. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4) notes to…

  3. Terahertz imaging and tomography as efficient instruments for testing polymer additive manufacturing objects.

    PubMed

    Perraud, J B; Obaton, A F; Bou-Sleiman, J; Recur, B; Balacey, H; Darracq, F; Guillet, J P; Mounaix, P

    2016-05-01

    Additive manufacturing (AM) technology is not only used to make 3D objects but also for rapid prototyping. In industry and laboratories, quality controls for these objects are necessary though difficult to implement compared to classical methods of fabrication because the layer-by-layer printing allows for very complex object manufacturing that is unachievable with standard tools. Furthermore, AM can induce unknown or unexpected defects. Consequently, we demonstrate terahertz (THz) imaging as an innovative method for 2D inspection of polymer materials. Moreover, THz tomography may be considered as an alternative to x-ray tomography and cheaper 3D imaging for routine control. This paper proposes an experimental study of 3D polymer objects obtained by additive manufacturing techniques. This approach allows us to characterize defects and to control dimensions by volumetric measurements on 3D data reconstructed by tomography.

  4. Flying Quality Analysis of a JAS 39 Gripen Ministick Controller in an F/A-18 Aircraft

    NASA Technical Reports Server (NTRS)

    Carter, John F.; Stoliker, P. C.

    2000-01-01

    NASA Dryden conducted a handling qualities experiment using a small displacement centerstick controller that Saab-Scania developed for the JAS 39 Gripen aircraft. The centerstick, or ministick, was mounted in the rear cockpit of an F/A-18 aircraft. Production support flight control computers (PSFCC) provided a pilot-selectable research control system. The objectives for this experiment included determining whether the mechanical characteristics of the centerstick controller had any significant effect on the handling qualities of the F/A-18, and determining the usefulness of the PSFCCs for this kind of experiment. Five pilots evaluated closed-loop tracking tasks, including echelon and column formation flight and target following. Cooper-Harper ratings and pilot comments were collected for each maneuver. This paper describes the test system, including the PSFCCs, the Gripen centerstick, and the flight test experiment. The paper presents results of longitudinal handling qualities maneuvers, including low order equivalent systems, Neal-Smith, and controls anticipation parameter analyses. The experiment showed that, while the centerstick controller provided a different aircraft feel, few handling qualities deficiencies resulted. It also demonstrated that the PSFCCs were useful for this kind of investigation.

  5. 32 CFR Appendix A to Part 290 - DCAA's Organization and Mission

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... established audit quality control standards, policies, and procedures and other internal control requirements... Information Service, 5285 Port Royal Road, Springfield, VA 22161. (c) Objective. Assist in achieving the... provides accounting and financial advisory service regarding contracts to all DoD components responsible...

  6. Motor Adaptation and Manual Transfer: Insight into the Persistent Nature of Sensorimotor Representations

    ERIC Educational Resources Information Center

    Green, Sharon; Grierson, Lawrence E. M.; Dubrowski, Adam; Carnahan, Heather

    2010-01-01

    It is well known that sensorimotor memories are built and updated through experience with objects. These representations are useful to anticipatory and feedforward control processes that preset grip and load forces during lifting. When individuals lift objects with qualities that are not congruent with their memory-derived expectations, feedback…

  7. Annual Report, Reservoir Control Center, Southwestern Division (1989)

    DTIC Science & Technology

    1990-01-01

    Division in the water quality field . This provides for water quality objectives being included as an effective part of our total water management...WES) selected Canyon Lake as a research field site for developing techniques to evaluate the impacts associated with installation of hydropower at Corps...term continuous goals of this Division, and consequently the Water Management Branch, in the water quality field . (1) To obtain sufficient water

  8. Evaluation of XV-15 tilt rotor aircraft for flying qualities research application

    NASA Technical Reports Server (NTRS)

    Radford, R. C.; Schelhorn, A. E.; Siracuse, R. J.; Till, R. D.; Wasserman, R.

    1976-01-01

    The results of a design review study and evaluation of the XV-15 Tilt Rotor Research Aircraft for flying qualities research application are presented. The objectives of the program were to determine the capability of the XV-15 aircraft and the V/STOLAND system as a safe, inflight facility to provide meaningful research data on flying qualities, flight control systems, and information display systems.

  9. Sleep quality in patients with xerostomia: a prospective and randomized case-control study.

    PubMed

    Lopez-Jornet, Pia; Lucero Berdugo, Maira; Fernandez-Pujante, Alba; C, Castillo Felipe; Lavella C, Zamora; A, Pons-Fuster; J, Silvestre Rangil; Silvestre, Francisco Javier

    2016-01-01

    Objectives To investigate sleep quality, anxiety/depression and quality-of-life in patients with xerostomia. Materials and methods This prospective, observational, cross-sectional study was conducted among a group of xerostomia patients (n = 30) compared with 30 matched control subjects. The following evaluation scales were used to assess the psychological profile of each patient: the Hospital Anxiety and Depression Scale, the Oral Health Impact Profile-14 (OHIP-14), the Xerostomia Inventory, the Pittsburgh Sleep Quality Index (PSQI) and the Epworth Sleepiness Scale (ESS). Results The PSQI obtained 5.3 3 ± 1.78 for patients with xerostomia compared with 4.26 ± 1.01 for control subjects (p = 0.006); ESS obtained 5.7 ± 2.1 for test patients vs 4.4 0 ± 1 for control subjects (p = 0.010). Statistical regression analysis showed that xerostomia was significantly associated with depression (p = 0.027). Conclusions Patients with xerostomia exhibited significant decreases in sleep quality compared with control subjects.

  10. Design and Development of a Nearable Wireless System to Control Indoor Air Quality and Indoor Lighting Quality.

    PubMed

    Salamone, Francesco; Belussi, Lorenzo; Danza, Ludovico; Galanos, Theodore; Ghellere, Matteo; Meroni, Italo

    2017-05-04

    The article describes the results of the project "open source smart lamp" aimed at designing and developing a smart object able to manage and control the indoor environmental quality (IEQ) of the built environment. A first version of this smart object, built following a do-it-yourself (DIY) approach using a microcontroller, an integrated temperature and relative humidity sensor, and techniques of additive manufacturing, allows the adjustment of the indoor thermal comfort quality (ICQ), by interacting directly with the air conditioner. As is well known, the IEQ is a holistic concept including indoor air quality (IAQ), indoor lighting quality (ILQ) and acoustic comfort, besides thermal comfort. The upgrade of the smart lamp bridges the gap of the first version of the device providing the possibility of interaction with the air exchange unit and lighting system in order to get an overview of the potential of a nearable device in the management of the IEQ. The upgraded version was tested in a real office equipped with mechanical ventilation and an air conditioning system. This office was occupied by four workers. The experiment is compared with a baseline scenario and the results show how the application of the nearable device effectively optimizes both IAQ and ILQ.

  11. Design and Development of a Nearable Wireless System to Control Indoor Air Quality and Indoor Lighting Quality

    PubMed Central

    Salamone, Francesco; Belussi, Lorenzo; Danza, Ludovico; Galanos, Theodore; Ghellere, Matteo; Meroni, Italo

    2017-01-01

    The article describes the results of the project “open source smart lamp” aimed at designing and developing a smart object able to manage and control the indoor environmental quality (IEQ) of the built environment. A first version of this smart object, built following a do-it-yourself (DIY) approach using a microcontroller, an integrated temperature and relative humidity sensor, and techniques of additive manufacturing, allows the adjustment of the indoor thermal comfort quality (ICQ), by interacting directly with the air conditioner. As is well known, the IEQ is a holistic concept including indoor air quality (IAQ), indoor lighting quality (ILQ) and acoustic comfort, besides thermal comfort. The upgrade of the smart lamp bridges the gap of the first version of the device providing the possibility of interaction with the air exchange unit and lighting system in order to get an overview of the potential of a nearable device in the management of the IEQ. The upgraded version was tested in a real office equipped with mechanical ventilation and an air conditioning system. This office was occupied by four workers. The experiment is compared with a baseline scenario and the results show how the application of the nearable device effectively optimizes both IAQ and ILQ. PMID:28471398

  12. The effect of singing training on voice quality for people with quadriplegia.

    PubMed

    Tamplin, Jeanette; Baker, Felicity A; Buttifant, Mary; Berlowitz, David J

    2014-01-01

    Despite anecdotal reports of voice impairment in quadriplegia, the exact nature of these impairments is not well described in the literature. This article details objective and subjective voice assessments for people with quadriplegia at baseline and after a respiratory-targeted singing intervention. Randomized controlled trial. Twenty-four participants with quadriplegia were randomly assigned to a 12-week program of either a singing intervention or active music therapy control. Recordings of singing and speech were made at baseline, 6 weeks, 12 weeks, and 6 months postintervention. These deidentified recordings were used to measure sound pressure levels and assess voice quality using the Multidimensional Voice Profile and the Perceptual Voice Profile. Baseline voice quality data indicated deviation from normality in the areas of breathiness, strain, and roughness. A greater percentage of intervention participants moved toward more normal voice quality in terms of jitter, shimmer, and noise-to-harmonic ratio; however, the improvements failed to achieve statistical significance. Subjective and objective assessments of voice quality indicate that quadriplegia may have a detrimental effect on voice quality; in particular, causing a perception of roughness and breathiness in the voice. The results of this study suggest that singing training may have a role in ameliorating these voice impairments. Copyright © 2014 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

  13. Achieving fertility control through woman’s autonomy and access to maternal healthcare: Are we on track? In-depth analysis of PDHS-2012-13

    PubMed Central

    Hassan, Sehar-un-Nisa; Siddiqui, Salma; Mahmood, Ayeshah

    2015-01-01

    Background and Objective: Fertility control preferences and maternal healthcare have recently become a major concern for developing nations with evidence suggesting that low fertility control rates and poor maternal healthcare are among major obstructions in ensuring health and social status for women. Our objective was toanalyze the factors that influence women’s autonomy, access to maternal healthcare, and fertility control preferences in Pakistan. Methods: Data consisted of 11,761 ever-married women of ages 15-49 years from PDHS, 2012-13. Variables included socio-demographics, women’s autonomy, fertility control preferences and access to maternal healthcare. Results: Findings from multivariate analysis showed that women’s younger age, having less than three number of children and independent or joint decision-making (indicators of high autonomy) remained the most significant predictors for access to better quality maternal healthcare and better fertility control preferences when other variables were controlled. Conclusion: Women’s access to good quality maternal health care and fertility control preferences are directly and indirectly influenced by their demographic characteristics and decision-making patterns in domestic affairs. PMID:26870096

  14. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Scaduto, DA; Hu, Y-H; Zhao, W

    Purpose: Spatial resolution in digital breast tomosynthesis (DBT) is affected by inherent/binned detector resolution, oblique entry of x-rays, and focal spot size/motion; the limited angular range further limits spatial resolution in the depth-direction. While DBT is being widely adopted clinically, imaging performance metrics and quality control protocols have not been standardized. AAPM Task Group 245 on Tomosynthesis Quality Control has been formed to address this deficiency. Methods: Methods of measuring spatial resolution are evaluated using two prototype quality control phantoms for DBT. Spatial resolution in the detector plane is measured in projection and reconstruction domains using edge-spread function (ESF), point-spreadmore » function (PSF) and modulation transfer function (MTF). Spatial resolution in the depth-direction and effective slice thickness are measured in the reconstruction domain using slice sensitivity profile (SSP) and artifact spread function (ASF). An oversampled PSF in the depth-direction is measured using a 50 µm angulated tungsten wire, from which the MTF is computed. Object-dependent PSF is derived and compared with ASF. Sensitivity of these measurements to phantom positioning, imaging conditions and reconstruction algorithms is evaluated. Results are compared from systems of varying acquisition geometry (9–25 projections over 15–60°). Dependence of measurements on feature size is investigated. Results: Measurements of spatial resolution using PSF and LSF are shown to depend on feature size; depth-direction spatial resolution measurements are shown to similarly depend on feature size for ASF, though deconvolution with an object function removes feature size-dependence. A slanted wire may be used to measure oversampled PSFs, from which MTFs may be computed for both in-plane and depth-direction resolution. Conclusion: Spatial resolution measured using PSF is object-independent with sufficiently small object; MTF is object-independent. Depth-direction spatial resolution may be measured directly using MTF or indirectly using ASF or SSP as surrogate measurements. While MTF is object-independent, it is invalid for nonlinear reconstructions.« less

  15. Remote interferometry by digital holography for shape control

    NASA Astrophysics Data System (ADS)

    Baumbach, Torsten; Osten, Wolfgang; Falldorf, Claas; Jueptner, Werner P. O.

    2002-06-01

    Modern production requires more and more effective methods for the inspection and quality control at the production place. Outsourcing and globalization result in possible large distances between co-operating partners. This may cause serious problems with respect to the just-in-time exchange of information and the response to possible violations of quality standards. Consequently new challenges arise for optical measurement techniques especially in the field of industrial shape control. A possible solution for these problems can be delivered by a technique that stores optically the full 3D information of the objects to be compared and where the data can be transported over large distances. In this paper we describe the progress in implementing a new technique for the direct comparison of the shape and deformation of two objects with different microstructure where it is not necessary that both samples are located at the same place. This is done by creating a coherent mask for the illumination of the sample object. The coherent mask is created by Digital Holography to enable the instant access to the complete optical information of the master object at any wanted place. The transmission of the digital master holograms to this place can be done via digital telecommunication networks. The comparison can be done in a digital or analogue way. Both methods result in a disappearance of the object shape and the appearance of the shape or deformation difference between the two objects only. The analogue reconstruction of the holograms with a liquid crystal spatial light modulator can be done by using the light modulator as an intensity modulator or as an phase modulator. The reconstruction technique and the space bandwidth of the light modulator will influence the quality of the result. Therefore the paper describes the progress in applying modern spatial light modulators and digital cameras for the effective storage and optical reconstruction of coherent masks.

  16. Design and Establishment of Quality Model of Fundamental Geographic Information Database

    NASA Astrophysics Data System (ADS)

    Ma, W.; Zhang, J.; Zhao, Y.; Zhang, P.; Dang, Y.; Zhao, T.

    2018-04-01

    In order to make the quality evaluation for the Fundamental Geographic Information Databases(FGIDB) more comprehensive, objective and accurate, this paper studies and establishes a quality model of FGIDB, which formed by the standardization of database construction and quality control, the conformity of data set quality and the functionality of database management system, and also designs the overall principles, contents and methods of the quality evaluation for FGIDB, providing the basis and reference for carry out quality control and quality evaluation for FGIDB. This paper designs the quality elements, evaluation items and properties of the Fundamental Geographic Information Database gradually based on the quality model framework. Connected organically, these quality elements and evaluation items constitute the quality model of the Fundamental Geographic Information Database. This model is the foundation for the quality demand stipulation and quality evaluation of the Fundamental Geographic Information Database, and is of great significance on the quality assurance in the design and development stage, the demand formulation in the testing evaluation stage, and the standard system construction for quality evaluation technology of the Fundamental Geographic Information Database.

  17. A Quality Assurance Initiative for Commercial-Scale Production in High-Throughput Cryopreservation of Blue Catfish Sperm

    PubMed Central

    Hu, E; Liao, T. W.; Tiersch, T. R.

    2013-01-01

    Cryopreservation of fish sperm has been studied for decades at a laboratory (research) scale. However, high-throughput cryopreservation of fish sperm has recently been developed to enable industrial-scale production. This study treated blue catfish (Ictalurus furcatus) sperm high-throughput cryopreservation as a manufacturing production line and initiated quality assurance plan development. The main objectives were to identify: 1) the main production quality characteristics; 2) the process features for quality assurance; 3) the internal quality characteristics and their specification designs; 4) the quality control and process capability evaluation methods, and 5) the directions for further improvements and applications. The essential product quality characteristics were identified as fertility-related characteristics. Specification design which established the tolerance levels according to demand and process constraints was performed based on these quality characteristics. Meanwhile, to ensure integrity throughout the process, internal quality characteristics (characteristics at each quality control point within process) that could affect fertility-related quality characteristics were defined with specifications. Due to the process feature of 100% inspection (quality inspection of every fish), a specific calculation method, use of cumulative sum (CUSUM) control charts, was applied to monitor each quality characteristic. An index of overall process evaluation, process capacity, was analyzed based on in-control process and the designed specifications, which further integrates the quality assurance plan. With the established quality assurance plan, the process could operate stably and quality of products would be reliable. PMID:23872356

  18. Follow-Up of External Quality Controls for PCR-Based Diagnosis of Whooping Cough in a Hospital Laboratory Network (Renacoq) and in Other Hospital and Private Laboratories in France.

    PubMed

    Guillot, Sophie; Guiso, Nicole

    2016-08-01

    The French National Reference Centre (NRC) for Whooping Cough carried out an external quality control (QC) analysis in 2010 for the PCR diagnosis of whooping cough. The main objective of the study was to assess the impact of this QC in the participating laboratories through a repeat analysis in 2012. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  19. Modal control theory and application to aircraft lateral handling qualities design

    NASA Technical Reports Server (NTRS)

    Srinathkumar, S.

    1978-01-01

    A multivariable synthesis procedure based on eigenvalue/eigenvector assignment is reviewed and is employed to develop a systematic design procedure to meet the lateral handling qualities design objectives of a fighter aircraft over a wide range of flight conditions. The closed loop modal characterization developed provides significant insight into the design process and plays a pivotal role in the synthesis of robust feedback systems. The simplicity of the synthesis algorithm yields an efficient computer aided interactive design tool for flight control system synthesis.

  20. Moving base simulation of an integrated flight and propulsion control system for an ejector-augmentor STOVL aircraft in hover

    NASA Technical Reports Server (NTRS)

    Mcneill, Walter, E.; Chung, William W.; Stortz, Michael W.

    1995-01-01

    A piloted motion simulator evaluation, using the NASA Ames Vertical Motion Simulator, was conducted in support of a NASA Lewis Contractual study of the integration of flight and propulsion systems of a STOVL aircraft. Objectives of the study were to validate the Design Methods for Integrated Control Systems (DMICS) concept, to evaluate the handling qualities, and to assess control power usage. The E-7D ejector-augmentor STOVL fighter design served as the basis for the simulation. Handling-qualities ratings were obtained during precision hover and shipboard landing tasks. Handling-qualities ratings for these tasks ranged from satisfactory to adequate. Further improvement of the design process to fully validate the DMICS concept appears to be warranted.

  1. Content dependent selection of image enhancement parameters for mobile displays

    NASA Astrophysics Data System (ADS)

    Lee, Yoon-Gyoo; Kang, Yoo-Jin; Kim, Han-Eol; Kim, Ka-Hee; Kim, Choon-Woo

    2011-01-01

    Mobile devices such as cellular phones and portable multimedia player with capability of playing terrestrial digital multimedia broadcasting (T-DMB) contents have been introduced into consumer market. In this paper, content dependent image quality enhancement method for sharpness and colorfulness and noise reduction is presented to improve perceived image quality on mobile displays. Human visual experiments are performed to analyze viewers' preference. Relationship between the objective measures and the optimal values of image control parameters are modeled by simple lookup tables based on the results of human visual experiments. Content dependent values of image control parameters are determined based on the calculated measures and predetermined lookup tables. Experimental results indicate that dynamic selection of image control parameters yields better image quality.

  2. Tradeoff studies in multiobjective insensitive design of airplane control systems

    NASA Technical Reports Server (NTRS)

    Schy, A. A.; Giesy, D. P.

    1983-01-01

    A computer aided design method for multiobjective parameter-insensitive design of airplane control systems is described. Methods are presented for trading off nominal values of design objectives against sensitivities of the design objectives to parameter uncertainties, together with guidelines for designer utilization of the methods. The methods are illustrated by application to the design of a lateral stability augmentation system for two supersonic flight conditions of the Shuttle Orbiter. Objective functions are conventional handling quality measures and peak magnitudes of control deflections and rates. The uncertain parameters are assumed Gaussian, and numerical approximations of the stochastic behavior of the objectives are described. Results of applying the tradeoff methods to this example show that stochastic-insensitive designs are distinctly different from deterministic multiobjective designs. The main penalty for achieving significant decrease in sensitivity is decreased speed of response for the nominal system.

  3. Evidence for the impact of quality improvement collaboratives: systematic review

    PubMed Central

    2008-01-01

    Objective To evaluate the effectiveness of quality improvement collaboratives in improving the quality of care. Data sources Relevant studies through Medline, Embase, PsycINFO, CINAHL, and Cochrane databases. Study selection Two reviewers independently extracted data on topics, participants, setting, study design, and outcomes. Data synthesis Of 1104 articles identified, 72 were included in the study. Twelve reports representing nine studies (including two randomised controlled trials) used a controlled design to measure the effects of the quality improvement collaborative intervention on care processes or outcomes of care. Systematic review of these nine studies showed moderate positive results. Seven studies (including one randomised controlled trial) reported an effect on some of the selected outcome measures. Two studies (including one randomised controlled trial) did not show any significant effect. Conclusions The evidence underlying quality improvement collaboratives is positive but limited and the effects cannot be predicted with great certainty. Considering that quality improvement collaboratives seem to play a key part in current strategies focused on accelerating improvement, but may have only modest effects on outcomes at best, further knowledge of the basic components effectiveness, cost effectiveness, and success factors is crucial to determine the value of quality improvement collaboratives. PMID:18577559

  4. Explicit optimization of plan quality measures in intensity-modulated radiation therapy treatment planning.

    PubMed

    Engberg, Lovisa; Forsgren, Anders; Eriksson, Kjell; Hårdemark, Björn

    2017-06-01

    To formulate convex planning objectives of treatment plan multicriteria optimization with explicit relationships to the dose-volume histogram (DVH) statistics used in plan quality evaluation. Conventional planning objectives are designed to minimize the violation of DVH statistics thresholds using penalty functions. Although successful in guiding the DVH curve towards these thresholds, conventional planning objectives offer limited control of the individual points on the DVH curve (doses-at-volume) used to evaluate plan quality. In this study, we abandon the usual penalty-function framework and propose planning objectives that more closely relate to DVH statistics. The proposed planning objectives are based on mean-tail-dose, resulting in convex optimization. We also demonstrate how to adapt a standard optimization method to the proposed formulation in order to obtain a substantial reduction in computational cost. We investigated the potential of the proposed planning objectives as tools for optimizing DVH statistics through juxtaposition with the conventional planning objectives on two patient cases. Sets of treatment plans with differently balanced planning objectives were generated using either the proposed or the conventional approach. Dominance in the sense of better distributed doses-at-volume was observed in plans optimized within the proposed framework. The initial computational study indicates that the DVH statistics are better optimized and more efficiently balanced using the proposed planning objectives than using the conventional approach. © 2017 American Association of Physicists in Medicine.

  5. A Telerehabilitation Approach to Enhance Quality of Life Through Exercise Among Adults With Paraplegia: Study Protocol.

    PubMed

    Sweet, Shane Norman; Rocchi, Meredith; Arbour-Nicitopoulos, Kelly; Kairy, Dahlia; Fillion, Brigitte

    2017-10-19

    Despite compelling evidence linking physical activity and quality of life among adults with spinal cord injury (SCI), exercise participation rates are extremely low in this population. Unfortunately, a lack of behavioral exercise interventions, in particular theory-based randomized controlled trials (RCT), exists within the SCI literature. A pilot RCT is needed to first examine the feasibility to conduct such interventions and determine the appropriate effect size to inform future full-scale interventions. The overall goal of this pilot RCT is to test an 8-week innovative, video-based telerehabilitation intervention based on self-determination theory and aimed at enhancing the basic psychological needs, motivation, exercise participation, and quality of life‒related outcomes of adults with paraplegia. The objectives are to (1) determine if individuals in the intervention group have greater increases in their basic psychological needs and autonomous motivation and a decrease in controlled motivation compared to the control group, (2) determine whether the intervention group reports greater increases in exercise participation and quality of life‒related variables (eg, life satisfaction, participation in daily/social activities, depressive symptoms) compared to the control group, and (3) examine if adults with paraplegia who received the intervention report improved scores on psychosocial predictors of exercise (eg, action planning) and well-being (eg, positive affect) compared to the control group. We also aimed to examine the implementation characteristics of the intervention (eg, satisfaction with the technology, counselor's ability to foster the psychological needs). Adults with paraplegia (N=24) living in the community will be recruited. All participants will be invited to complete assessments of their psychological needs, motivation, exercise, and quality of life‒related variables at three time points (baseline, 6, and 10 weeks). Following the baseline assessment, participants will be randomly assigned to the intervention or control group. Participants in the intervention group will participate in 8 weekly, 1-hour video-based telerehabilitation sessions with a trained physical activity counselor, while participants in the control group will be asked to continue with their regular routine. We expect higher ratings of the basic psychological needs and autonomous motivation and lower scores for controlled motivation for the intervention group compared to the control group (Objective 1). We also expect that our video-based intervention will have moderate effects on exercise participation, as well as small-to-moderate positive effects on the quality of life‒related variables (Objective 2). Finally, we expect the intervention to have a small positive effect on psychosocial predictors of physical activity and well-being (Objective 3). We anticipate that the results will show that the intervention is appropriate for adults with paraplegia and feasible to test in a full-scale RCT. ClinicalTrials.gov NCT02833935; https://clinicaltrials.gov/ct2/show/NCT02833935 (Archived by WebCite at http://www.webcitation.org/6u8U9x2yt). ©Shane Norman Sweet, Meredith Rocchi, Kelly Arbour-Nicitopoulos, Dahlia Kairy, Brigitte Fillion. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 19.10.2017.

  6. Improving Multi-Objective Management of Water Quality Tipping Points: Revisiting the Classical Shallow Lake Problem

    NASA Astrophysics Data System (ADS)

    Quinn, J. D.; Reed, P. M.; Keller, K.

    2015-12-01

    Recent multi-objective extensions of the classical shallow lake problem are useful for exploring the conceptual and computational challenges that emerge when managing irreversible water quality tipping points. Building on this work, we explore a four objective version of the lake problem where a hypothetical town derives economic benefits from polluting a nearby lake, but at the risk of irreversibly tipping the lake into a permanently polluted state. The trophic state of the lake exhibits non-linear threshold dynamics; below some critical phosphorus (P) threshold it is healthy and oligotrophic, but above this threshold it is irreversibly eutrophic. The town must decide how much P to discharge each year, a decision complicated by uncertainty in the natural P inflow to the lake. The shallow lake problem provides a conceptually rich set of dynamics, low computational demands, and a high level of mathematical difficulty. These properties maximize its value for benchmarking the relative merits and limitations of emerging decision support frameworks, such as Direct Policy Search (DPS). Here, we explore the use of DPS as a formal means of developing robust environmental pollution control rules that effectively account for deeply uncertain system states and conflicting objectives. The DPS reformulation of the shallow lake problem shows promise in formalizing pollution control triggers and signposts, while dramatically reducing the computational complexity of the multi-objective pollution control problem. More broadly, the insights from the DPS variant of the shallow lake problem formulated in this study bridge emerging work related to socio-ecological systems management, tipping points, robust decision making, and robust control.

  7. Real-time quality assurance testing using photonic techniques: Application to iodine water system

    NASA Technical Reports Server (NTRS)

    Arendale, W. F.; Hatcher, Richard; Garlington, Yadilett; Harwell, Jack; Everett, Tracey

    1990-01-01

    A feasibility study of the use of inspection systems incorporating photonic sensors and multivariate analyses to provide an instrumentation system that in real-time assures quality and that the system in control has been conducted. A system is in control when the near future of the product quality is predictable. Off-line chemical analyses can be used for a chemical process when slow kinetics allows time to take a sample to the laboratory and the system provides a recovery mechanism that returns the system to statistical control without intervention of the operator. The objective for this study has been the implementation of do-it-right-the-first-time and just-in-time philosophies. The Environment Control and Life Support Systems (ECLSS) water reclamation system that adds iodine for biocidal control is an ideal candidate for the study and implementation of do-it-right-the-first-time technologies.

  8. Alignment issues, correlation techniques and their assessment for a visible light imaging-based 3D printer quality control system

    NASA Astrophysics Data System (ADS)

    Straub, Jeremy

    2016-05-01

    Quality control is critical to manufacturing. Frequently, techniques are used to define object conformity bounds, based on historical quality data. This paper considers techniques for bespoke and small batch jobs that are not statistical model based. These techniques also serve jobs where 100% validation is needed due to the mission or safety critical nature of particular parts. One issue with this type of system is alignment discrepancies between the generated model and the physical part. This paper discusses and evaluates techniques for characterizing and correcting alignment issues between the projected and perceived data sets to prevent errors attributable to misalignment.

  9. Does enrollment status in community-based insurance lead to poorer quality of care? Evidence from Burkina Faso

    PubMed Central

    2013-01-01

    Introduction In 2004, a community-based health insurance (CBI) scheme was introduced in Nouna health district, Burkina Faso, with the objective of improving financial access to high quality health services. We investigate the role of CBI enrollment in the quality of care provided at primary-care facilities in Nouna district, and measure differences in objective and perceived quality of care and patient satisfaction between enrolled and non-enrolled populations who visit the facilities. Methods We interviewed a systematic random sample of 398 patients after their visit to one of the thirteen primary-care facilities contracted with the scheme; 34% (n = 135) of the patients were currently enrolled in the CBI scheme. We assessed objective quality of care as consultation, diagnostic and counselling tasks performed by providers during outpatient visits, perceived quality of care as patient evaluations of the structures and processes of service delivery, and overall patient satisfaction. Two-sample t-tests were performed for group comparison and ordinal logistic regression (OLR) analysis was used to estimate the association between CBI enrollment and overall patient satisfaction. Results Objective quality of care evaluations show that CBI enrollees received substantially less comprehensive care for outpatient services than non-enrollees. In contrast, CBI enrollment was positively associated with overall patient satisfaction (aOR = 1.51, p = 0.014), controlling for potential confounders such as patient socio-economic status, illness symptoms, history of illness and characteristics of care received. Conclusions CBI patients perceived better quality of care, while objectively receiving worse quality of care, compared to patients who were not enrolled in CBI. Systematic differences in quality of care expectations between CBI enrollees and non-enrollees may explain this finding. One factor influencing quality of care may be the type of provider payment used by the CBI scheme, which has been identified as a leading factor in reducing provider motivation to deliver high quality care to CBI enrollees in previous studies. Based on this study, it is unlikely that perceived quality of care and patient satisfaction explain the low CBI enrollment rates in this community. PMID:23680066

  10. Development of quality control and instrumentation performance metrics for diffuse optical spectroscopic imaging instruments in the multi-center clinical environment

    NASA Astrophysics Data System (ADS)

    Keene, Samuel T.; Cerussi, Albert E.; Warren, Robert V.; Hill, Brian; Roblyer, Darren; Leproux, AnaÑ--s.; Durkin, Amanda F.; O'Sullivan, Thomas D.; Haghany, Hosain; Mantulin, William W.; Tromberg, Bruce J.

    2013-03-01

    Instrument equivalence and quality control are critical elements of multi-center clinical trials. We currently have five identical Diffuse Optical Spectroscopic Imaging (DOSI) instruments enrolled in the American College of Radiology Imaging Network (ACRIN, #6691) trial located at five academic clinical research sites in the US. The goal of the study is to predict the response of breast tumors to neoadjuvant chemotherapy in 60 patients. In order to reliably compare DOSI measurements across different instruments, operators and sites, we must be confident that the data quality is comparable. We require objective and reliable methods for identifying, correcting, and rejecting low quality data. To achieve this goal, we developed and tested an automated quality control algorithm that rejects data points below the instrument noise floor, improves tissue optical property recovery, and outputs a detailed data quality report. Using a new protocol for obtaining dark-noise data, we applied the algorithm to ACRIN patient data and successfully improved the quality of recovered physiological data in some cases.

  11. Quality control analysis : part V : review of data generated by statistical specifications on asphaltic concrete : final report.

    DOT National Transportation Integrated Search

    1975-12-01

    The primary objective of this study was to review the data generated by projects governed by statistically oriented system of specifications for the control and acceptance of asphaltic concrete and to recommend any revisions that may be deemed necess...

  12. Quality Assurance Project Plan for Closure of the Central Facilities Area Sewage Treatment Plant Lagoon 3 and Land Application Area

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lewis, Michael G.

    This quality assurance project plan describes the technical requirements and quality assurance activities of the environmental data collection/analyses operations to close Central Facilities Area Sewage treatment Plant Lagoon 3 and the land application area. It describes the organization and persons involved, the data quality objectives, the analytical procedures, and the specific quality control measures to be employed. All quality assurance project plan activities are implemented to determine whether the results of the sampling and monitoring performed are of the right type, quantity, and quality to satisfy the requirements for closing Lagoon 3 and the land application area.

  13. Stability and Control Analysis of the F-15B Quiet SpikeTM Aircraft

    NASA Technical Reports Server (NTRS)

    McWherter, Shaun C.; Moua, Cheng M.; Gera, Joseph; Cox, Timothy H.

    2009-01-01

    The primary purpose of the Quiet Spike(TradeMark) flight research program was to analyze the aerodynamic, structural, and mechanical proof-of-concept of a large multi-stage telescoping nose spike installed on the National Aeronautics and Space Administration Dryden Flight Research Center (Edwards, California) F-15B airplane. This report describes the preflight stability and control analysis performed to assess the effect of the spike on the stability, controllability, and handling qualities of the airplane; and to develop an envelope expansion approach to maintain safety of flight. The overall flight test objective was to collect flight data to validate the spike structural dynamics and loads model up to Mach 1.8. Other objectives included validating the mechanical feasibility of a morphing fuselage at operational conditions and determining the near-field shock wave characterization. The two main issues relevant to the stability and control objectives were the effects of the spike-influenced aerodynamics on the F-15B airplane flight dynamics, and the air data and angle-of-attack sensors. The analysis covered the sensitivity of the stability margins, and the handling qualities due to aerodynamic variation and the maneuvering limitations of the F-15B Quiet Spike configuration. The results of the analysis and the implications for the flight test program are also presented.

  14. Effects of music and music video interventions on sleep quality: A randomized controlled trial in adults with sleep disturbances.

    PubMed

    Huang, Chiung-Yu; Chang, En-Ting; Hsieh, Yuan-Mei; Lai, Hui-Ling

    2017-10-01

    The present study aimed to compare the effects of music and music video interventions on objective and subjective sleep quality in adults with sleep disturbances. A randomized controlled trial was performed on 71 adults who were recruited from the outpatient department of a hospital with 1100 beds and randomly assigned to the control, music, and music video groups. During the 4 test days (Days 2-5), for 30min before nocturnal sleep, the music group listened to Buddhist music and the music video group watched Buddhist music videos. They were instructed to not listen/watch to the music/MV on the first night (pretest, Day 1) and the final night (Day 6). The control group received no intervention. Sleep was assessed using a one-channel electroencephalography machine in their homes and self-reported questionnaires. The music and music video interventions had no effect on any objective sleep parameters, as measured using electroencephalography. However, the music group had significantly longer subjective total sleep time than the music video group did (Wald χ 2 =6.23, p=0.04). Our study results increase knowledge regarding music interventions for sleep quality in adults with sleep disturbances. This study suggested that more research is required to strengthen the scientific knowledge of the effects of music intervention on sleep quality in adults with sleep disturbances. (ISRCTN94971645). Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. The Role of Interactional Quality in Learning from Touch Screens during Infancy: Context Matters.

    PubMed

    Zack, Elizabeth; Barr, Rachel

    2016-01-01

    Interactional quality has been shown to enhance learning during book reading and play, but has not been examined during touch screen use. Learning to apply knowledge from a touch screen is complex for infants because it involves transfer of learning between a two-dimensional (2D) screen and three-dimensional (3D) object in the physical world. This study uses a touch screen procedure to examine interactional quality measured via maternal structuring, diversity of maternal language, and dyadic emotional responsiveness and infant outcomes during a transfer of learning task. Fifty 15-month-old infants and their mothers participated in this semi-naturalistic teaching task. Mothers were given a 3D object, and a static image of the object presented on a touch screen. Mothers had 5 min to teach their infant that a button on the real toy works in the same way as a virtual button on the touch screen (or vice versa). Overall, 64% of infants learned how to make the button work, transferring learning from the touch screen to the 3D object or vice versa. Infants were just as successful in the 3D to 2D transfer direction as they were in the 2D to 3D transfer direction. A cluster analysis based on emotional responsiveness, the proportion of diverse maternal verbal input, and amount of maternal structuring resulted in two levels of interactional quality: high quality and moderate quality. A logistic regression revealed the level of interactional quality predicted infant transfer. Infants were 19 times more likely to succeed and transfer learning between the touch screen and real object if they were in a high interactional quality dyad, even after controlling for infant activity levels. The present findings suggest that interactional quality between mother and infant plays an important role in making touch screens effective teaching tools for infants' learning.

  16. The Role of Interactional Quality in Learning from Touch Screens during Infancy: Context Matters

    PubMed Central

    Zack, Elizabeth; Barr, Rachel

    2016-01-01

    Interactional quality has been shown to enhance learning during book reading and play, but has not been examined during touch screen use. Learning to apply knowledge from a touch screen is complex for infants because it involves transfer of learning between a two-dimensional (2D) screen and three-dimensional (3D) object in the physical world. This study uses a touch screen procedure to examine interactional quality measured via maternal structuring, diversity of maternal language, and dyadic emotional responsiveness and infant outcomes during a transfer of learning task. Fifty 15-month-old infants and their mothers participated in this semi-naturalistic teaching task. Mothers were given a 3D object, and a static image of the object presented on a touch screen. Mothers had 5 min to teach their infant that a button on the real toy works in the same way as a virtual button on the touch screen (or vice versa). Overall, 64% of infants learned how to make the button work, transferring learning from the touch screen to the 3D object or vice versa. Infants were just as successful in the 3D to 2D transfer direction as they were in the 2D to 3D transfer direction. A cluster analysis based on emotional responsiveness, the proportion of diverse maternal verbal input, and amount of maternal structuring resulted in two levels of interactional quality: high quality and moderate quality. A logistic regression revealed the level of interactional quality predicted infant transfer. Infants were 19 times more likely to succeed and transfer learning between the touch screen and real object if they were in a high interactional quality dyad, even after controlling for infant activity levels. The present findings suggest that interactional quality between mother and infant plays an important role in making touch screens effective teaching tools for infants’ learning. PMID:27625613

  17. Intelligent Control Approaches for Aircraft Applications

    NASA Technical Reports Server (NTRS)

    Gundy-Burlet, Karen; KrishnaKumar, K.; Soloway, Don; Kaneshige, John; Clancy, Daniel (Technical Monitor)

    2001-01-01

    This paper presents an overview of various intelligent control technologies currently being developed and studied under the Intelligent Flight Control (IFC) program at the NASA Ames Research Center. The main objective of the intelligent flight control program is to develop the next generation of flight controllers for the purpose of automatically compensating for a broad spectrum of damaged or malfunctioning aircraft components and to reduce control law development cost and time. The approaches being examined include: (a) direct adaptive dynamic inverse controller and (b) an adaptive critic-based dynamic inverse controller. These approaches can utilize, but do not require, fault detection and isolation information. Piloted simulation studies are performed to examine if the intelligent flight control techniques adequately: 1) Match flying qualities of modern fly-by-wire flight controllers under nominal conditions; 2) Improve performance under failure conditions when sufficient control authority is available; and 3) Achieve consistent handling qualities across the flight envelope and for different aircraft configurations. Results obtained so far demonstrate the potential for improving handling qualities and significantly increasing survivability rates under various simulated failure conditions.

  18. RoCoMAR: robots' controllable mobility aided routing and relay architecture for mobile sensor networks.

    PubMed

    Le, Duc Van; Oh, Hoon; Yoon, Seokhoon

    2013-07-05

    In a practical deployment, mobile sensor network (MSN) suffers from a low performance due to high node mobility, time-varying wireless channel properties, and obstacles between communicating nodes. In order to tackle the problem of low network performance and provide a desired end-to-end data transfer quality, in this paper we propose a novel ad hoc routing and relaying architecture, namely RoCoMAR (Robots' Controllable Mobility Aided Routing) that uses robotic nodes' controllable mobility. RoCoMAR repeatedly performs link reinforcement process with the objective of maximizing the network throughput, in which the link with the lowest quality on the path is identified and replaced with high quality links by placing a robotic node as a relay at an optimal position. The robotic node resigns as a relay if the objective is achieved or no more gain can be obtained with a new relay. Once placed as a relay, the robotic node performs adaptive link maintenance by adjusting its position according to the movements of regular nodes. The simulation results show that RoCoMAR outperforms existing ad hoc routing protocols for MSN in terms of network throughput and end-to-end delay.

  19. RoCoMAR: Robots' Controllable Mobility Aided Routing and Relay Architecture for Mobile Sensor Networks

    PubMed Central

    Van Le, Duc; Oh, Hoon; Yoon, Seokhoon

    2013-01-01

    In a practical deployment, mobile sensor network (MSN) suffers from a low performance due to high node mobility, time-varying wireless channel properties, and obstacles between communicating nodes. In order to tackle the problem of low network performance and provide a desired end-to-end data transfer quality, in this paper we propose a novel ad hoc routing and relaying architecture, namely RoCoMAR (Robots' Controllable Mobility Aided Routing) that uses robotic nodes' controllable mobility. RoCoMAR repeatedly performs link reinforcement process with the objective of maximizing the network throughput, in which the link with the lowest quality on the path is identified and replaced with high quality links by placing a robotic node as a relay at an optimal position. The robotic node resigns as a relay if the objective is achieved or no more gain can be obtained with a new relay. Once placed as a relay, the robotic node performs adaptive link maintenance by adjusting its position according to the movements of regular nodes. The simulation results show that RoCoMAR outperforms existing ad hoc routing protocols for MSN in terms of network throughput and end-to-end delay. PMID:23881134

  20. Locus of control, quality of life, anxiety, and depression among Malaysian breast cancer patients: The mediating role of uncertainty.

    PubMed

    Pahlevan Sharif, Saeed

    2017-04-01

    The main objective of this study was to investigate the mediating role of uncertainty in the relationship between locus of control with quality of life, anxiety, and depression. A descriptive and correlational survey was conducted in a private hospital in Kuala Lumpur, Malaysia. A convenience sample of 118 Malaysian breast cancer patients voluntarily participated in the study and responded to a set of questionnaires including: socio-demographic questionnaire, the short form of Locus of Control Scale, the Functional Assessment of Cancer Therapy-Breast (FACT-B), the Hospital Anxiety and Depression Scale (HADS), and the Short-Form Mishel Uncertainty in Illness Scale (SF-MUIS). The results revealed that breast cancer patients with higher internal locus of control and lower external locus of control experience a higher quality of life, lower anxiety, and lower depression. Also, uncertainty mediated the relationship between locus of control with quality of life and depression (quasi-significant). The findings indicated the need for early, targeted psychological interventions seeking to gradually shift cancer patients' locus of control from external to internal in order to improve their quality of life and reduce their depression and anxiety. Moreover, health care providers by providing relevant information to cancer patients, especially for externally oriented patients, can reduce their uncertainty which in turn would improve their quality of life. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Massage Therapy for Patients with Metastatic Cancer: A Pilot Randomized Controlled Trial

    PubMed Central

    Toth, Maria; Marcantonio, Edward R.; Davis, Roger B.; Walton, Tracy; Kahn, Janet R.

    2013-01-01

    Abstract Objectives The study objectives were to determine the feasibility and effects of providing therapeutic massage at home for patients with metastatic cancer. Design This was a randomized controlled trial. Settings/location Patients were enrolled at Oncology Clinics at a large urban academic medical center; massage therapy was provided in patients' homes. Subjects Subjects were patients with metastatic cancer. Interventions There were three interventions: massage therapy, no-touch intervention, and usual care. Outcome measures Primary outcomes were pain, anxiety, and alertness; secondary outcomes were quality of life and sleep. Results In this study, it was possible to provide interventions for all patients at home by professional massage therapists. The mean number of massage therapy sessions per patient was 2.8. A significant improvement was found in the quality of life of the patients who received massage therapy after 1-week follow-up, which was not observed in either the No Touch control or the Usual Care control groups, but the difference was not sustained at 1 month. There were trends toward improvement in pain and sleep of the patients after therapeutic massage but not in patients in the control groups. There were no serious adverse events related to the interventions. Conclusions The study results showed that it is feasible to provide therapeutic massage at home for patients with advanced cancer, and to randomize patients to a no-touch intervention. Providing therapeutic massage improves the quality of life at the end of life for patients and may be associated with further beneficial effects, such as improvement in pain and sleep quality. Larger randomized controlled trials are needed to substantiate these findings. PMID:23368724

  2. 20 CFR 602.20 - Organization.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR QUALITY CONTROL IN THE FEDERAL-STATE... QC unit. The organizational location of this unit shall be positioned to maximize its objectivity, to... organizational conflict of interest. ...

  3. A case study: application of statistical process control tool for determining process capability and sigma level.

    PubMed

    Chopra, Vikram; Bairagi, Mukesh; Trivedi, P; Nagar, Mona

    2012-01-01

    Statistical process control is the application of statistical methods to the measurement and analysis of variation process. Various regulatory authorities such as Validation Guidance for Industry (2011), International Conference on Harmonisation ICH Q10 (2009), the Health Canada guidelines (2009), Health Science Authority, Singapore: Guidance for Product Quality Review (2008), and International Organization for Standardization ISO-9000:2005 provide regulatory support for the application of statistical process control for better process control and understanding. In this study risk assessments, normal probability distributions, control charts, and capability charts are employed for selection of critical quality attributes, determination of normal probability distribution, statistical stability, and capability of production processes, respectively. The objective of this study is to determine tablet production process quality in the form of sigma process capability. By interpreting data and graph trends, forecasting of critical quality attributes, sigma process capability, and stability of process were studied. The overall study contributes to an assessment of process at the sigma level with respect to out-of-specification attributes produced. Finally, the study will point to an area where the application of quality improvement and quality risk assessment principles for achievement of six sigma-capable processes is possible. Statistical process control is the most advantageous tool for determination of the quality of any production process. This tool is new for the pharmaceutical tablet production process. In the case of pharmaceutical tablet production processes, the quality control parameters act as quality assessment parameters. Application of risk assessment provides selection of critical quality attributes among quality control parameters. Sequential application of normality distributions, control charts, and capability analyses provides a valid statistical process control study on process. Interpretation of such a study provides information about stability, process variability, changing of trends, and quantification of process ability against defective production. Comparative evaluation of critical quality attributes by Pareto charts provides the least capable and most variable process that is liable for improvement. Statistical process control thus proves to be an important tool for six sigma-capable process development and continuous quality improvement.

  4. Auricular acupuncture for sleep disturbance in veterans with post-traumatic stress disorder: a feasibility study.

    PubMed

    King, Heather C; Spence, Dennis L; Hickey, Anita H; Sargent, Paul; Elesh, Ronald; Connelly, Cynthia D

    2015-05-01

    The purpose of this study was to examine the feasibility and acceptability of an auricular acupuncture (AA) insomnia regimen among Operation Iraqi Freedom and Operation Enduring Freedom veterans with post-traumatic stress disorder and sleep disturbance. Secondarily, this study examined the effect of an AA insomnia regimen on objective sleep times by wrist actigraphy, subjective sleep times by sleep diary, and sleep quality ratings utilizing the Pittsburg Sleep Quality Index. Veterans (n = 30) were randomized to receive a 3-week AA insomnia regimen. Veterans receiving the AA insomnia regimen reported it as a more acceptable treatment for sleep disturbance than subjects in the control group (AA group median = 5 vs. control group median = 3, p = 0.004). Significant differences between groups were found on the sleep quality and daytime dysfunction components of the Pittsburgh Sleep Quality Index (p = 0.003, p = 0.004). No other significant differences between groups were found for objective and subjective sleep measures. These results suggest that an AA insomnia regimen may improve sleep quality and daytime dysfunction among veterans with post-traumatic stress disorder. Future, large-scale, prospective clinical trials are needed to examine AA effects on sleep. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

  5. Temperature Control System for Mushroom Dryer

    NASA Astrophysics Data System (ADS)

    Wibowo, I. A.; Indah, Nur; Sebayang, D.; Adam, N. H.

    2018-03-01

    The main problem in mushroom cultivation is the handling after the harvest. Drying is one technique to preserve the mushrooms. Traditionally, mushrooms are dried by sunshine which depends on the weather. This affects the quality of the dried mushrooms. Therefore, this paper proposes a system to provide an artificial drying for mushrooms in order to maintain their quality. The objective of the system is to control the mushroom drying process to be faster compared to the natural drying at an accurate and right temperature. A model of the mushroom dryer has been designed, built, and tested. The system comprises a chamber, heater, blower, temperature sensor and electronic control circuit. A microcontroller is used as the controller which is programmed to implement a bang-bang control that regulates the temperature of the chamber. A desired temperature is inputted as a set point of the control system. Temperature of 45 °C is chosen as the operational drying temperature. Several tests have been carried out to examine the performance of the system including drying speed, the effects of ambient conditions, and the effects of mushroom size. The results show that the system can satisfy the objective.

  6. Multi-Objective Flight Control for Drag Minimization and Load Alleviation of High-Aspect Ratio Flexible Wing Aircraft

    NASA Technical Reports Server (NTRS)

    Nguyen, Nhan; Ting, Eric; Chaparro, Daniel; Drew, Michael; Swei, Sean

    2017-01-01

    As aircraft wings become much more flexible due to the use of light-weight composites material, adverse aerodynamics at off-design performance can result from changes in wing shapes due to aeroelastic deflections. Increased drag, hence increased fuel burn, is a potential consequence. Without means for aeroelastic compensation, the benefit of weight reduction from the use of light-weight material could be offset by less optimal aerodynamic performance at off-design flight conditions. Performance Adaptive Aeroelastic Wing (PAAW) technology can potentially address these technical challenges for future flexible wing transports. PAAW technology leverages multi-disciplinary solutions to maximize the aerodynamic performance payoff of future adaptive wing design, while addressing simultaneously operational constraints that can prevent the optimal aerodynamic performance from being realized. These operational constraints include reduced flutter margins, increased airframe responses to gust and maneuver loads, pilot handling qualities, and ride qualities. All of these constraints while seeking the optimal aerodynamic performance present themselves as a multi-objective flight control problem. The paper presents a multi-objective flight control approach based on a drag-cognizant optimal control method. A concept of virtual control, which was previously introduced, is implemented to address the pair-wise flap motion constraints imposed by the elastomer material. This method is shown to be able to satisfy the constraints. Real-time drag minimization control is considered to be an important consideration for PAAW technology. Drag minimization control has many technical challenges such as sensing and control. An initial outline of a real-time drag minimization control has already been developed and will be further investigated in the future. A simulation study of a multi-objective flight control for a flight path angle command with aeroelastic mode suppression and drag minimization demonstrates the effectiveness of the proposed solution. In-flight structural loads are also an important consideration. As wing flexibility increases, maneuver load and gust load responses can be significant and therefore can pose safety and flight control concerns. In this paper, we will extend the multi-objective flight control framework to include load alleviation control. The study will focus initially on maneuver load minimization control, and then subsequently will address gust load alleviation control in future work.

  7. Moderators of the Relationship between Implicit and Explicit Evaluation

    PubMed Central

    Nosek, Brian A.

    2005-01-01

    Automatic and controlled modes of evaluation sometimes provide conflicting reports of the quality of social objects. This paper presents evidence for four moderators of the relationship between automatic (implicit) and controlled (explicit) evaluations. Implicit and explicit preferences were measured for a variety of object pairs using a large sample. The average correlation was r = .36, and 52 of the 57 object pairs showed a significant positive correlation. Results of multilevel modeling analyses suggested that: (a) implicit and explicit preferences are related, (b) the relationship varies as a function of the objects assessed, and (c) at least four variables moderate the relationship – self-presentation, evaluative strength, dimensionality, and distinctiveness. The variables moderated implicit-explicit correspondence across individuals and accounted for much of the observed variation across content domains. The resulting model of the relationship between automatic and controlled evaluative processes is grounded in personal experience with the targets of evaluation. PMID:16316292

  8. Quality of Life, Sleep, and Health of Air Traffic Controllers With Rapid Counterclockwise Shift Rotation.

    PubMed

    Sonati, Jaqueline Girnos; De Martino, Milva Maria Figueiredo; Vilarta, Roberto; da Silva Maciel, Érika; Sonati, Renato José Ferreira; Paduan, Paulo Cézar

    2016-08-01

    Rotating shiftwork is common for air traffic controllers and usually causes sleep deprivation, biological adaptations, and life changes for these workers. This study assessed quality of life, the sleep, and the health of 30 air traffic controllers employed at an international airport in Brazil. The objective was to identify health and quality of life concerns of these professionals. The results identified physical inactivity, overweight, excess body fat, low scores for physical and social relationships, and sleep deprivation for workers in all four workshifts. In conclusion, these workers are at risk for chronic non-transmittable diseases and compromised work performance, suggesting the need for more rest time before working nightshifts and work environments that stimulate physical activity and healthy diets. © 2016 The Author(s).

  9. Importance of implementing an analytical quality control system in a core laboratory.

    PubMed

    Marques-Garcia, F; Garcia-Codesal, M F; Caro-Narros, M R; Contreras-SanFeliciano, T

    2015-01-01

    The aim of the clinical laboratory is to provide useful information for screening, diagnosis and monitoring of disease. The laboratory should ensure the quality of extra-analytical and analytical process, based on set criteria. To do this, it develops and implements a system of internal quality control, designed to detect errors, and compare its data with other laboratories, through external quality control. In this way it has a tool to detect the fulfillment of the objectives set, and in case of errors, allowing corrective actions to be made, and ensure the reliability of the results. This article sets out to describe the design and implementation of an internal quality control protocol, as well as its periodical assessment intervals (6 months) to determine compliance with pre-determined specifications (Stockholm Consensus(1)). A total of 40 biochemical and 15 immunochemical methods were evaluated using three different control materials. Next, a standard operation procedure was planned to develop a system of internal quality control that included calculating the error of the analytical process, setting quality specifications, and verifying compliance. The quality control data were then statistically depicted as means, standard deviations, and coefficients of variation, as well as systematic, random, and total errors. The quality specifications were then fixed and the operational rules to apply in the analytical process were calculated. Finally, our data were compared with those of other laboratories through an external quality assurance program. The development of an analytical quality control system is a highly structured process. This should be designed to detect errors that compromise the stability of the analytical process. The laboratory should review its quality indicators, systematic, random and total error at regular intervals, in order to ensure that they are meeting pre-determined specifications, and if not, apply the appropriate corrective actions. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

  10. DEVELOPMENT OF DATA QUALITY OBJECTIVES AND USE OF TWO VARIATIONS OF GENETICALLY-MODIFIED STREPTOCOCCUS GORDONIL AS LYSIS CONTROLS IN A QPCR ASSAY FOR ASSESSING SANITARY QUALITY OF WATER

    EPA Science Inventory

    Joseph B. James and Fred J. Genthner

    United States Environmental Protection Agency, Gulf Breeze, FL

    Background: Methods using rapid cycle, real-time, quantitative (QPCR) are being developed for detecting and quantifying Enterococcus spp. as well as other aquatic b...

  11. The NCC project: A quality management perspective

    NASA Technical Reports Server (NTRS)

    Lee, Raymond H.

    1993-01-01

    The Network Control Center (NCC) Project introduced the concept of total quality management (TQM) in mid-1990. The CSC project team established a program which focused on continuous process improvement in software development methodology and consistent deliveries of high quality software products for the NCC. The vision of the TQM program was to produce error free software. Specific goals were established to allow continuing assessment of the progress toward meeting the overall quality objectives. The total quality environment, now a part of the NCC Project culture, has become the foundation for continuous process improvement and has resulted in the consistent delivery of quality software products over the last three years.

  12. [The establishment and application of internal quality control system for real-time quantitative PCR detection of BCR-ABL (P210) transcript levels].

    PubMed

    Zhong, C Q; He, N; Hua, M Q; Wei, X D; Ma, D X; Ji, C Y

    2016-09-14

    Objective: To set internal quality control system of BCR-ABL (P210) transcript levels for real-time quantitative PCR (RQ-PCR). Methods: Using K562 cells and HL-60 cells, we prepared high- and low-level BCR-ABL internal quality control substance. The BCR-ABL (P210) transcript levels of internal quality control substance have been determined for 184 times together with clinical samples from August 2013 to October 2015. The slope rate, intercept and correlation coefficient of standard curve were calculated according to different reagent lots (lots number 20130303, 20131212, 20140411 and 20150327 are called R1、R2、R3 and R4 for short respectively), and the detection results of quality control substance were calculated according to different reagent lots and quality control substance lots (lots number 20130725, 20140611 are called Q1、Q2 for short respectively). Then the results were analyzed by Levey-Jennings quality control chart combined with Westgard multi-rules theory. Results: ①We analyzed the slope rate and intercept of standard curve. Fifty-three times of the R1 reagent detection, 80 times of the R3 reagent detection and 14 times of the R4 reagent detection were all under control. For 37 times detection of R2 reagent, the slope rate was out of control for 6 times. It was lower than x - s for the 2-8 tests and upper the average for the 12-37 tests. The intercept was out of control for 9 times, upper the x + s for the 1-8 tests and lower the average for the 12-37 tests. ② According to the detection results of quality control substance, for Q1 quality control substance, 49 tests by R1 reagent were under control, and 1 out of 23 tests by R2 reagent was out of control. For Q2 quality control substance, 14 tests by R2 reagent detection, 72 tests by R3 reagent detection and 14 tests by R4 reagent were all under control. Conclusion: The preparation of high- and low-level quality control substance using K562 and HL-60 cells was convenient and the detection results were reliable and stable. The application of quality control substance combined with slope rate and intercept in the internal quality control may contribute to quality assurance for quantitative detection of BCR-ABL (P210) transcript levels.

  13. Oral nutritional supplements containing n-3 polyunsaturated fatty acids affect quality of life and functional status in lung cancer patients during multimodality treatment: an RCT

    PubMed Central

    van der Meij, B S; Langius, J A E; Spreeuwenberg, M D; Slootmaker, S M; Paul, M A; Smit, E F; van Leeuwen, P A M

    2012-01-01

    Background/Objectives: Our objective was to investigate effects of an oral nutritional supplement containing n-3 polyunsaturated fatty acids (FAs) on quality of life, performance status, handgrip strength and physical activity in patients with non-small cell lung cancer (NSCLC) undergoing multimodality treatment. Subjects/Methods: In a double-blind experiment, 40 patients with stage III NSCLC were randomised to receive 2 cans/day of a protein- and energy-dense oral nutritional supplement containing n-3 polyunsaturated FAs (2.02 g eicosapentaenoic acid+0.92 g docosahexaenoic acid/day) or an isocaloric control supplement, during multimodality treatment. Quality of life, Karnofsky Performance Status, handgrip strength and physical activity (by wearing an accelerometer) were assessed. Effects of intervention were analysed by generalised estimating equations. P-values <0.05 were regarded as statistically significant. Results: The intervention group reported significantly higher on the quality of life parameters, physical and cognitive function (B=11.6 and B=20.7, P<0.01), global health status (B=12.2, P=0.04) and social function (B=22.1, P=0.04) than the control group after 5 weeks. The intervention group showed a higher Karnofsky Performance Status (B=5.3, P=0.04) than the control group after 3 weeks. Handgrip strength did not significantly differ between groups over time. The intervention group tended to have a higher physical activity than the control group after 3 and 5 weeks (B=6.6, P=0.04 and B=2.5, P=0.05). Conclusion: n-3 Polyunsaturated FAs may beneficially affect quality of life, performance status and physical activity in patients with NSCLC undergoing multimodality treatment. PMID:22234041

  14. Published methodological quality of randomized controlled trials does not reflect the actual quality assessed in protocols

    PubMed Central

    Mhaskar, Rahul; Djulbegovic, Benjamin; Magazin, Anja; Soares, Heloisa P.; Kumar, Ambuj

    2011-01-01

    Objectives To assess whether reported methodological quality of randomized controlled trials (RCTs) reflect the actual methodological quality, and to evaluate the association of effect size (ES) and sample size with methodological quality. Study design Systematic review Setting Retrospective analysis of all consecutive phase III RCTs published by 8 National Cancer Institute Cooperative Groups until year 2006. Data were extracted from protocols (actual quality) and publications (reported quality) for each study. Results 429 RCTs met the inclusion criteria. Overall reporting of methodological quality was poor and did not reflect the actual high methodological quality of RCTs. The results showed no association between sample size and actual methodological quality of a trial. Poor reporting of allocation concealment and blinding exaggerated the ES by 6% (ratio of hazard ratio [RHR]: 0.94, 95%CI: 0.88, 0.99) and 24% (RHR: 1.24, 95%CI: 1.05, 1.43), respectively. However, actual quality assessment showed no association between ES and methodological quality. Conclusion The largest study to-date shows poor quality of reporting does not reflect the actual high methodological quality. Assessment of the impact of quality on the ES based on reported quality can produce misleading results. PMID:22424985

  15. Quality of life and objective outcome assessment in women with tape division after surgery for stress urinary incontinence

    PubMed Central

    Ulrich, Daniela; Bjelic-Radisic, Vesna; Höllein, Anna; Tamussino, Karl; Aigmüller, Thomas

    2017-01-01

    Background Midurethral tapes may cause long-term complications such as voiding dysfunction, groin pain, de novo urgency or mesh erosion, which necessitate a reoperation. There is a paucity of data regarding health related quality of life in patients undergoing tape removal. The aim of the study was to evaluate quality of life (QoL) and objective outcome after midurethral tape division or excision. Methods All patients who underwent a midurethral tape division for voiding difficulties, pain or therapy resistant de novo overactive bladder between 1999 and 2014 were invited for follow-up. A control group with a suburethral tape without division was established in a 1:2 ratio and matched for age, tape used and year of tape insertion. Patients completed the Kings´ Health Questionnaire (KHQ), Incontinence Outcome Questionnaire, Female Sexual Function Index Questionnaire and the Patient Global Impression of Improvement score. Results Tape division or excision was performed in 32 women. Overall, 15 (60%) of 25 women who were alive were available for clinical examination and completed the questionnaires. Tape division was performed for voiding dysfunction (n = 7), overactive bladder (n = 2), mesh extrusion (n = 3) and ongoing pain (n = 3). Median time to tape division/excision was 10 months. Three women in the tape division group had undergone reoperation for stress urinary incontinence (SUI). At a median follow-up of 11 years (IQR 9–13) subjective SUI rate was 53% (8/15 women) in the tape division group and 17% (5/30) in the control group (p = 0.016), with no significant differences in objective SUI rates between groups. With regard to quality of life, the study group had significantly worse scores in the SUI related domains role limitation, physical limitation, severity measures and social limitations (KHQ) compared to the control group. Conclusions Women needing tape division or excision have lower SUI related QoL scores compared to controls mostly because of higher subjective SUI rates. PMID:28346541

  16. Asthma Self-Management Model: Randomized Controlled Trial

    ERIC Educational Resources Information Center

    Olivera, Carolina M. X.; Vianna, Elcio Oliveira; Bonizio, Roni C.; de Menezes, Marcelo B.; Ferraz, Erica; Cetlin, Andrea A.; Valdevite, Laura M.; Almeida, Gustavo A.; Araujo, Ana S.; Simoneti, Christian S.; de Freitas, Amanda; Lizzi, Elisangela A.; Borges, Marcos C.; de Freitas, Osvaldo

    2016-01-01

    Information for patients provided by the pharmacist is reflected in adhesion to treatment, clinical results and patient quality of life. The objective of this study was to assess an asthma self-management model for rational medicine use. This was a randomized controlled trial with 60 asthmatic patients assigned to attend five modules presented by…

  17. Effect of non-alcoholic beer on Subjective Sleep Quality in a university stressed population.

    PubMed

    Franco, L; Bravo, R; Galán, C; Rodríguez, A B; Barriga, C; Cubero, Javier

    2014-09-01

    Sleep deprivation affects the homeostasis of the physiological functions in the human organism. Beer is the only beverage that contains hops, a plant which has a sedative effect. Our objective is to determine the improvement of subjective sleep quality using the Pittsburgh Sleep Quality Index (PSQI). The sample was conducted among a population of 30 university students. The study took place during a period of 3 weeks, the first 7 days were used for the Control, and during the following 14 days the students ingested beer (were asked to drink non-alcoholic beer) while having dinner. The results revealed that Subjective Sleep Quality improved in the case of those students who drank one beer during dinner compared to the Control, this is corroborated by the fact that Sleep Latency decreased (p < 0.05) compared to their Control. The overall rating Global Score of Quality of Sleep also improved significantly (p < 0.05). These results confirm that the consumption of non-alcoholic beer at dinner time helps to improve the quality of sleep at night.

  18. Pilot Evaluation of Adaptive Control in Motion-Based Flight Simulator

    NASA Technical Reports Server (NTRS)

    Kaneshige, John T.; Campbell, Stefan Forrest

    2009-01-01

    The objective of this work is to assess the strengths, weaknesses, and robustness characteristics of several MRAC (Model-Reference Adaptive Control) based adaptive control technologies garnering interest from the community as a whole. To facilitate this, a control study using piloted and unpiloted simulations to evaluate sensitivities and handling qualities was conducted. The adaptive control technologies under consideration were ALR (Adaptive Loop Recovery), BLS (Bounded Linear Stability), Hybrid Adaptive Control, L1, OCM (Optimal Control Modification), PMRAC (Predictor-based MRAC), and traditional MRAC

  19. Correlation pattern recognition: optimal parameters for quality standards control of chocolate marshmallow candy

    NASA Astrophysics Data System (ADS)

    Flores, Jorge L.; García-Torales, G.; Ponce Ávila, Cristina

    2006-08-01

    This paper describes an in situ image recognition system designed to inspect the quality standards of the chocolate pops during their production. The essence of the recognition system is the localization of the events (i.e., defects) in the input images that affect the quality standards of pops. To this end, processing modules, based on correlation filter, and segmentation of images are employed with the objective of measuring the quality standards. Therefore, we designed the correlation filter and defined a set of features from the correlation plane. The desired values for these parameters are obtained by exploiting information about objects to be rejected in order to find the optimal discrimination capability of the system. Regarding this set of features, the pop can be correctly classified. The efficacy of the system has been tested thoroughly under laboratory conditions using at least 50 images, containing 3 different types of possible defects.

  20. Application of indices Cp and Cpk to improve quality control capability in clinical biochemistry laboratories.

    PubMed

    Chen, Ming-Shu; Wu, Ming-Hsun; Lin, Chih-Ming

    2014-04-30

    The traditional criteria for acceptability of analytic quality may not be objective in clinical laboratories. To establish quality control procedures intended to enhance Westgard multi-rules for improving the quality of clinical biochemistry tests, we applied the Cp and Cpk quality-control indices to monitor tolerance fitting and systematic variation of clinical biochemistry test results. Daily quality-control data of a large Taiwanese hospital in 2009 were analyzed. The test items were selected based on an Olympus biochemistry machine and included serum albumin, aspartate aminotransferase, cholesterol, glucose and potassium levels. Cp and Cpk values were calculated for normal and abnormal levels, respectively. The tolerance range was estimated with data from 50 laboratories using the same instruments and reagents. The results showed a monthly trend of variation for the five items under investigation. The index values of glucose were lower than those of the other items, and their values were usually <2. In contrast to the Cp value for cholesterol, Cpk of cholesterol was lower than 2, indicating a systematic error that should be further investigated. This finding suggests a degree of variation or failure to meet specifications that should be corrected. The study indicated that Cp and Cpk could be applied not only for monitoring variations in quality control, but also for revealing inter-laboratory qualitycontrol capability differences.

  1. COPD control: Can a consensus be found?

    PubMed

    Guimarães, M; Bugalho, A; Oliveira, A S; Moita, J; Marques, A

    2016-01-01

    There are currently no reliable instruments for assessing the onset and progression of chronic obstructive pulmonary disease (COPD) or predicting its prognosis. Currently, a comprehensive assessment of COPD including several objective and subjective parameters is recommended. However, the lack of biomarkers precludes a correct assessment of COPD severity, which consequently hampers adequate therapeutic approaches and COPD control. In the absence of a definition of "well-controlled disease", a consensus regarding COPD control will be difficult to reach. However, COPD patient assessment should be multidimensional, and anchored in five points: control of symptoms, decline of pulmonary function, levels of physical activity, exacerbations, and Quality of Life. Several non-pharmacological and pharmacological measures are currently available to achieve disease control. Smoking cessation, vaccination, exercise training programs and pulmonary rehabilitation are recognized as important non-pharmacological measures but bronchodilators are the pivotal therapy in the control of COPD. This paper discusses several objective and subjective parameters that may bridge the gap between disease assessment and disease control. The authors conclude that, at present, it is not possible to reach a consensus regarding COPD control, essentially due to the lack of objective instruments to measure it. Some recommendations are set forth, but true COPD control awaits further objective assessments. Copyright © 2016. Published by Elsevier España, S.L.U.

  2. RELATIONSHIP OF ASSESS SELF-ESTEEM AND LOCUS OF CONTROL WITH QUALITY OF LIFE DURING TREATMENT STAGES IN PATIENTS REFERRING TO DRUG ADDICTION REHABILITATION CENTERS

    PubMed Central

    Heidari, Mohammad; Ghodusi, Mansureh

    2016-01-01

    Objective: Thus, the present research was carried out aimed at determining the relationship between self-esteem and locus of control and quality of life during treatment stages in the patients referring to drug addiction rehabilitation centers of Borujen city, Iran. Methods: The current study was a sectional research of descriptive correlation type. The research sample was 150 individuals of patients referring to addiction rehabilitation centers of Borujen city. For data gathering, Rosenberg Self-esteem Scale, Rotter’s Locus of Control Scale, and SF36 Quality of Life Questionnaire were used. Following collection of questionnaires, the data were analyzed using SPSS/16 software. Results: According to the results, in the 12th day of treatment, 96 patients exhibited moderate self-esteem, 102 patients had internal locus of control, and the score of their overall quality of life was 40.43±12.71. Furthermore, Pearson’s correlation coefficient indicated that a significant and positive relationship was observed between locus of control and quality of life during different treatment stages. Conclusion: It seems that quality of life improves during addiction treatment stages due to improvement of personality traits including locus of control and self-esteem. Therefore, consultation methods as a very crucial priority in addiction rehabilitation centers shall be taken into account by the health sector authorities and managers and can play an essential role in enhancing quality of life. PMID:27698598

  3. Practical quality control tools for curves and surfaces

    NASA Technical Reports Server (NTRS)

    Small, Scott G.

    1992-01-01

    Curves (geometry) and surfaces created by Computer Aided Geometric Design systems in the engineering environment must satisfy two basic quality criteria: the geometric shape must have the desired engineering properties; and the objects must be parameterized in a way which does not cause computational difficulty for geometric processing and engineering analysis. Interactive techniques are described which are in use at Boeing to evaluate the quality of aircraft geometry prior to Computational Fluid Dynamic analysis, including newly developed methods for examining surface parameterization and its effects.

  4. Quality Assurance Specifications for Planetary Protection Assays

    NASA Astrophysics Data System (ADS)

    Baker, Amy

    As the European Space Agency planetary protection (PP) activities move forward to support the ExoMars and other planetary missions, it will become necessary to increase staffing of labo-ratories that provide analyses for these programs. Standardization of procedures, a comprehen-sive quality assurance program, and unilateral training of personnel will be necessary to ensure that the planetary protection goals and schedules are met. The PP Quality Assurance/Quality Control (QAQC) program is designed to regulate and monitor procedures performed by labora-tory personnel to ensure that all work meets data quality objectives through the assembly and launch process. Because personnel time is at a premium and sampling schedules are often de-pendent on engineering schedules, it is necessary to have flexible staffing to support all sampling requirements. The most productive approach to having a competent and flexible work force is to establish well defined laboratory procedures and training programs that clearly address the needs of the program and the work force. The quality assurance specification for planetary protection assays has to ensure that labora-tories and associated personnel can demonstrate the competence to perform assays according to the applicable standard AD4. Detailed subjects included in the presentation are as follows: • field and laboratory control criteria • data reporting • personnel training requirements and certification • laboratory audit criteria. Based upon RD2 for primary and secondary validation and RD3 for data quality objectives, the QAQC will provide traceable quality assurance safeguards by providing structured laboratory requirements for guidelines and oversight including training and technical updates, standardized documentation, standardized QA/QC checks, data review and data archiving.

  5. A Control-Theoretic Approach for the Combined Management of Quality-of-Service and Energy in Service Centers

    NASA Astrophysics Data System (ADS)

    Poussot-Vassal, Charles; Tanelli, Mara; Lovera, Marco

    The complexity of Information Technology (IT) systems is steadily increasing and system complexity has been recognised as the main obstacle to further advancements of IT. This fact has recently raised energy management issues. Control techniques have been proposed and successfully applied to design Autonomic Computing systems, trading-off system performance with energy saving goals. As users behaviour is highly time varying and workload conditions can change substantially within the same business day, the Linear Parametrically Varying (LPV) framework is particularly promising for modeling such systems. In this chapter, a control-theoretic method to investigate the trade-off between Quality of Service (QoS) requirements and energy saving objectives in the case of admission control in Web service systems is proposed, considering as control variables the server CPU frequency and the admission probability. To quantitatively evaluate the trade-off, a dynamic model of the admission control dynamics is estimated via LPV identification techniques. Based on this model, an optimisation problem within the Model Predictive Control (MPC) framework is setup, by means of which it is possible to investigate the optimal trade-off policy to manage QoS and energy saving objectives at design time and taking into explicit account the system dynamics.

  6. Monitoring Processes in Visual Search Enhanced by Professional Experience: The Case of Orange Quality-Control Workers

    PubMed Central

    Visalli, Antonino; Vallesi, Antonino

    2018-01-01

    Visual search tasks have often been used to investigate how cognitive processes change with expertise. Several studies have shown visual experts' advantages in detecting objects related to their expertise. Here, we tried to extend these findings by investigating whether professional search experience could boost top-down monitoring processes involved in visual search, independently of advantages specific to objects of expertise. To this aim, we recruited a group of quality-control workers employed in citrus farms. Given the specific features of this type of job, we expected that the extensive employment of monitoring mechanisms during orange selection could enhance these mechanisms even in search situations in which orange-related expertise is not suitable. To test this hypothesis, we compared performance of our experimental group and of a well-matched control group on a computerized visual search task. In one block the target was an orange (expertise target) while in the other block the target was a Smurfette doll (neutral target). The a priori hypothesis was to find an advantage for quality-controllers in those situations in which monitoring was especially involved, that is, when deciding the presence/absence of the target required a more extensive inspection of the search array. Results were consistent with our hypothesis. Quality-controllers were faster in those conditions that extensively required monitoring processes, specifically, the Smurfette-present and both target-absent conditions. No differences emerged in the orange-present condition, which resulted to mainly rely on bottom-up processes. These results suggest that top-down processes in visual search can be enhanced through immersive real-life experience beyond visual expertise advantages. PMID:29497392

  7. Assessing the Validity of the Quality of Life Enjoyment and Satisfaction Questionnaire--Short Form in Adults with ADHD

    ERIC Educational Resources Information Center

    Mick, Eric; Faraone, Stephen V.; Spencer, Thomas; Zhang, Huabin F.; Biederman, Joseph

    2008-01-01

    Objective: The authors assessed the psychometric properties of the Quality of Life Enjoyment and Satisfaction Questionnaire-Short Form (Q-LES-QSF) in adults with ADHD. Method: One hundred fifty ADHD and 134 non-ADHD adults from a case-control study and 173 adults randomized to placebo or methylphenidate were assessed with the Q-LES-QSF and the…

  8. Quality control algorithms for rainfall measurements

    NASA Astrophysics Data System (ADS)

    Golz, Claudia; Einfalt, Thomas; Gabella, Marco; Germann, Urs

    2005-09-01

    One of the basic requirements for a scientific use of rain data from raingauges, ground and space radars is data quality control. Rain data could be used more intensively in many fields of activity (meteorology, hydrology, etc.), if the achievable data quality could be improved. This depends on the available data quality delivered by the measuring devices and the data quality enhancement procedures. To get an overview of the existing algorithms a literature review and literature pool have been produced. The diverse algorithms have been evaluated to meet VOLTAIRE objectives and sorted in different groups. To test the chosen algorithms an algorithm pool has been established, where the software is collected. A large part of this work presented here is implemented in the scope of the EU-project VOLTAIRE ( Validati on of mu ltisensors precipit ation fields and numerical modeling in Mediter ran ean test sites).

  9. Implementation of quality by design toward processing of food products.

    PubMed

    Rathore, Anurag S; Kapoor, Gautam

    2017-05-28

    Quality by design (QbD) is a systematic approach that begins with predefined objectives and emphasizes product and process understanding and process control. It is an approach based on principles of sound science and quality risk management. As the food processing industry continues to embrace the idea of in-line, online, and/or at-line sensors and real-time characterization for process monitoring and control, the existing gaps with regard to our ability to monitor multiple parameters/variables associated with the manufacturing process will be alleviated over time. Investments made for development of tools and approaches that facilitate high-throughput analytical and process development, process analytical technology, design of experiments, risk analysis, knowledge management, and enhancement of process/product understanding would pave way for operational and economic benefits later in the commercialization process and across other product pipelines. This article aims to achieve two major objectives. First, to review the progress that has been made in the recent years on the topic of QbD implementation in processing of food products and second, present a case study that illustrates benefits of such QbD implementation.

  10. Influence of scanning parameters on the estimation accuracy of control points of B-spline surfaces

    NASA Astrophysics Data System (ADS)

    Aichinger, Julia; Schwieger, Volker

    2018-04-01

    This contribution deals with the influence of scanning parameters like scanning distance, incidence angle, surface quality and sampling width on the average estimated standard deviations of the position of control points from B-spline surfaces which are used to model surfaces from terrestrial laser scanning data. The influence of the scanning parameters is analyzed by the Monte Carlo based variance analysis. The samples were generated for non-correlated and correlated data, leading to the samples generated by Latin hypercube and replicated Latin hypercube sampling algorithms. Finally, the investigations show that the most influential scanning parameter is the distance from the laser scanner to the object. The angle of incidence shows a significant effect for distances of 50 m and longer, while the surface quality contributes only negligible effects. The sampling width has no influence. Optimal scanning parameters can be found in the smallest possible object distance at an angle of incidence close to 0° in the highest surface quality. The consideration of correlations improves the estimation accuracy and underlines the importance of complete stochastic models for TLS measurements.

  11. Objective but not subjective sleep predicts memory in community-dwelling older adults.

    PubMed

    Cavuoto, Marina G; Ong, Ben; Pike, Kerryn E; Nicholas, Christian L; Bei, Bei; Kinsella, Glynda J

    2016-08-01

    Research on the relationship between habitual sleep patterns and memory performance in older adults is limited. No previous study has used objective and subjective memory measures in a large, older-aged sample to examine the association between sleep and various domains of memory. The aim of this study was to examine the association between objective and subjective measures of sleep with memory performance in older adults, controlling for the effects of potential confounds. One-hundred and seventy-three community-dwelling older adults aged 65-89 years in Victoria, Australia completed the study. Objective sleep quality and length were ascertained using the Actiwatch 2 Mini-Mitter, while subjective sleep was measured using the Pittsburgh Sleep Quality Index. Memory was indexed by tests of retrospective memory (Hopkins Verbal Learning Test - Revised), working memory (n-back, 2-back accuracy) and prospective memory (a habitual button pressing task). Compared with normative data, overall performance on retrospective memory function was within the average range. Hierarchical regression was used to determine whether objective or subjective measures of sleep predicted memory performances after controlling for demographics, health and mood. After controlling for confounds, actigraphic sleep indices (greater wake after sleep onset, longer sleep-onset latency and longer total sleep time) predicted poorer retrospective (∆R(2)  = 0.05, P = 0.016) and working memory (∆R(2)  = 0.05, P = 0.047). In contrast, subjective sleep indices did not significantly predict memory performances. In community-based older adults, objectively-measured, habitual sleep indices predict poorer memory performances. It will be important to follow the sample longitudinally to determine trajectories of change over time. © 2016 European Sleep Research Society.

  12. Randomized controlled trial of a good practice approach to treatment of childhood obesity in Malaysia: Malaysian Childhood Obesity Treatment Trial (MASCOT).

    PubMed

    Wafa, Sharifah W; Talib, Ruzita A; Hamzaid, Nur H; McColl, John H; Rajikan, Roslee; Ng, Lai O; Ramli, Ayiesah H; Reilly, John J

    2011-06-01

    Few randomized controlled trials (RCTs) of interventions for the treatment of childhood obesity have taken place outside the Western world. To test whether a good practice intervention for the treatment of childhood obesity would have a greater impact on weight status and other outcomes than a control condition in Kuala Lumpur, Malaysia. Assessor-blinded RCT of a treatment intervention in 107 obese 7- to 11-year olds. The intervention was relatively low intensity (8 hours contact over 26 weeks, group based), aiming to change child sedentary behavior, physical activity, and diet using behavior change counselling. Outcomes were measured at baseline and six months after the start of the intervention. Primary outcome was BMI z-score, other outcomes were weight change, health-related quality of life (Peds QL), objectively measured physical activity and sedentary behavior (Actigraph accelerometry over 5 days). The intervention had no significant effect on BMI z score relative to control. Weight gain was reduced significantly in the intervention group compared to the control group (+1.5 kg vs. +3.5 kg, respectively, t-test p < 0.01). Changes in health-related quality of life and objectively measured physical activity and sedentary behavior favored the intervention group. Treatment was associated with reduced rate of weight gain, and improvements in physical activity and quality of life. More substantial benefits may require longer term and more intensive interventions which aim for more substantive lifestyle changes.

  13. Identifying Items to Assess Methodological Quality in Physical Therapy Trials: A Factor Analysis

    PubMed Central

    Cummings, Greta G.; Fuentes, Jorge; Saltaji, Humam; Ha, Christine; Chisholm, Annabritt; Pasichnyk, Dion; Rogers, Todd

    2014-01-01

    Background Numerous tools and individual items have been proposed to assess the methodological quality of randomized controlled trials (RCTs). The frequency of use of these items varies according to health area, which suggests a lack of agreement regarding their relevance to trial quality or risk of bias. Objective The objectives of this study were: (1) to identify the underlying component structure of items and (2) to determine relevant items to evaluate the quality and risk of bias of trials in physical therapy by using an exploratory factor analysis (EFA). Design A methodological research design was used, and an EFA was performed. Methods Randomized controlled trials used for this study were randomly selected from searches of the Cochrane Database of Systematic Reviews. Two reviewers used 45 items gathered from 7 different quality tools to assess the methodological quality of the RCTs. An exploratory factor analysis was conducted using the principal axis factoring (PAF) method followed by varimax rotation. Results Principal axis factoring identified 34 items loaded on 9 common factors: (1) selection bias; (2) performance and detection bias; (3) eligibility, intervention details, and description of outcome measures; (4) psychometric properties of the main outcome; (5) contamination and adherence to treatment; (6) attrition bias; (7) data analysis; (8) sample size; and (9) control and placebo adequacy. Limitation Because of the exploratory nature of the results, a confirmatory factor analysis is needed to validate this model. Conclusions To the authors' knowledge, this is the first factor analysis to explore the underlying component items used to evaluate the methodological quality or risk of bias of RCTs in physical therapy. The items and factors represent a starting point for evaluating the methodological quality and risk of bias in physical therapy trials. Empirical evidence of the association among these items with treatment effects and a confirmatory factor analysis of these results are needed to validate these items. PMID:24786942

  14. SU-E-T-97: An Analysis of Knowledge Based Planning for Stereotactic Body Radiation Therapy of the Spine

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Foy, J; Marsh, R; Owen, D

    2015-06-15

    Purpose: Creating high quality SBRT treatment plans for the spine is often tedious and time consuming. In addition, the quality of treatment plans can vary greatly between treatment facilities due to inconsistencies in planning methods. This study investigates the performance of knowledge-based planning (KBP) for spine SBRT. Methods: Treatment plans were created for 28 spine SBRT patients. Each case was planned to meet strict dose objectives and guidelines. After physician and physicist approval, the plans were added to a custom model in a KBP system (RapidPlan, Varian Eclipse v13.5). The model was then trained to be able to predict estimatedmore » DVHs and provide starting objective functions for future patients based on both generated and manual objectives. To validate the model, ten additional spine SBRT cases were planned manually as well as using the model objectives. Plans were compared based on planning time and quality (ability to meet the plan objectives, including dose metrics and conformity). Results: The average dose to the spinal cord and the cord PRV differed between the validation and control plans by <0.25% demonstrating iso-toxicity. Six out of 10 validation plans met all dose objectives without the need for modifications, and overall, target dose coverage was increased by about 4.8%. If the validation plans did not meet the dose requirements initially, only 1–2 iterations of modifying the planning parameters were required before an acceptable plan was achieved. While manually created plans usually required 30 minutes to 3 hours to create, KBP can be used to create similar quality plans in 15–20 minutes. Conclusion: KBP for spinal tumors has shown to greatly decrease the amount of time required to achieve high quality treatment plans with minimal human intervention and could feasibly be used to standardize plan quality between institutions. Supported by Varian Medical Systems.« less

  15. Demand controlled ventilating systems: Sensor market survey. Energy conservation in buildings and community systems programme, annex 18, December 1991

    NASA Astrophysics Data System (ADS)

    Raatschen, W.; Sjoegren, M.

    The subject of indoor and outdoor air quality has generated a great deal of attention in many countries. Areas of concern include outgassing of building materials as well as occupant-generated pollutants such as carbon dioxide, moisture, and odors. Progress has also been made towards addressing issues relating to the air tightness of the building envelope. Indoor air quality studies indicate that better control of supply flow rates as well as the air distribution pattern within buildings are necessary. One method of maintaining good indoor air quality without extensive energy consumption is to control the ventilation rate according to the needs and demands of the occupants, or to preserve the building envelope. This is accomplished through the use of demand controlled ventilating (DCV) systems. The specific objective of Annex 18 is to develop guidelines for demand controlled ventilating systems based on state of the art analyses, case studies on ventilation effectiveness, and proposed ventilation rates for different users in domestic, office, and school buildings.

  16. The Impact of a Teaching or Singing Career on the Female Vocal Quality at the Mean Age of 67 Years: A Pilot Study.

    PubMed

    D'haeseleer, Evelien; Claeys, Sofie; Bettens, Kim; Leemans, Laura; Van Calster, Ann-Sophie; Van Damme, Nina; Thijs, Zoë; Daelman, Julie; Leyns, Clara; Van Lierde, Kristiane

    2017-07-01

    The purpose of this study was to measure the objective and subjective vocal quality in women aged between 60 and 75 years. Secondly, the impact of a teaching or singing career on the vocal quality was investigated by comparing the vocal quality of retired women with different careers. This is a case-control study. Seventy-three retired women between 60 and 75 years (mean age: 67 years, standard deviation: 4.49) participated in the study and were divided into three groups: women with a teaching career (n = 21), choir singers with a singing career (n = 12), and women with a non-vocal career (n = 40). All subjects underwent the same assessment protocol consisting of objective (aerodynamic, maximum performance, vocal range, acoustic measurements, and the Dysphonia Severity Index) and subjective (the Voice Handicap Index, auditory-perceptual evaluations by three listeners) voice measurements. In all three groups, objective and perceptual voice analysis showed a mild dysphonia. No differences in the Dysphonia Severity Index were found between the three groups. The voices of choir singers with a singing career were perceived significantly less rough than voices of the women with a non-vocal career. Additionally, the lowest frequency of the frequency range was significantly lower in the retired teachers and choir singers than in the controls. The results of this study prudently suggest that a singing or a teaching career compared with a non-vocal career has a positive impact on the vocal frequency range, and that singing has a positive impact on the perceptual vocal quality of the older female voice. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  17. AMBIENT AIR QUALITY MONITORING

    EPA Science Inventory

    The primary objective of this workshop is to exchange information on available scientific bases for environmental regulatory decision making to senior Chinese decision-makers in a readily understandable format in order to expedite appropriate control measures in China. The Pol...

  18. Managing the travel model process : small and medium-sized MPOs. Instructor guide.

    DOT National Transportation Integrated Search

    2013-09-01

    The learning objectives of this course were to: explain fundamental travel model concepts; describe the model development process; identify key inputs and describe the quality control process; and identify and manage resources.

  19. Managing the travel model process : small and medium-sized MPOs. Participant handbook.

    DOT National Transportation Integrated Search

    2013-09-01

    The learning objectives of this course were to: explain fundamental travel model concepts; describe the model development process; identify key inputs and describe the quality control process; and identify and manage resources.

  20. A new design to evaluate erosion and sediment control

    Treesearch

    Johnny M. Grace

    2006-01-01

    Water quality issues surrounding sediment movement related to forest operations are a focus in forest management. The forest road system is a primary area of concern related to sediment movement because roads are a component of most forest operations. Controlling sediment movement is a common objective in most forestry best management practices (BMPs). However, there...

  1. PedsQL gastrointestinal symptoms scales and gastrointestinal worry scales in pediatric patients with functional and organic gastrointestinal diseases in comparison to healthy controls

    USDA-ARS?s Scientific Manuscript database

    The primary objective was to compare the gastrointestinal (GI) symptoms and worry of pediatric patients with functional GI disorders (FGIDs) and organic GI diseases to healthy controls utilizing the Pediatric Quality of Life Inventory (PedsQL) Gastrointestinal Symptoms and Worry Scales for patient s...

  2. Local environmental quality positively predicts breastfeeding in the UK's Millennium Cohort Study.

    PubMed

    Brown, Laura J; Sear, Rebecca

    2017-01-01

    Background and Objectives: Breastfeeding is an important form of parental investment with clear health benefits. Despite this, rates remain low in the UK; understanding variation can therefore help improve interventions. Life history theory suggests that environmental quality may pattern maternal investment, including breastfeeding. We analyse a nationally representative dataset to test two predictions: (i) higher local environmental quality predicts higher likelihood of breastfeeding initiation and longer duration; (ii) higher socioeconomic status (SES) provides a buffer against the adverse influences of low local environmental quality. Methodology: We ran factor analysis on a wide range of local-level environmental variables. Two summary measures of local environmental quality were generated by this analysis-one 'objective' (based on an independent assessor's neighbourhood scores) and one 'subjective' (based on respondent's scores). We used mixed-effects regression techniques to test our hypotheses. Results: Higher objective, but not subjective, local environmental quality predicts higher likelihood of starting and maintaining breastfeeding over and above individual SES and area-level measures of environmental quality. Higher individual SES is protective, with women from high-income households having relatively high breastfeeding initiation rates and those with high status jobs being more likely to maintain breastfeeding, even in poor environmental conditions. Conclusions and Implications: Environmental quality is often vaguely measured; here we present a thorough investigation of environmental quality at the local level, controlling for individual- and area-level measures. Our findings support a shift in focus away from individual factors and towards altering the landscape of women's decision making contexts when considering behaviours relevant to public health.

  3. [Quality evaluation of the orthodontic practice for certification by ISO 9001. A procedure beneficial for medical, medico-dental or hospital service].

    PubMed

    Becker, G

    2001-01-01

    The accreditation of the ISO 9001 certification (ISO = International Standard Organization) is an external evaluation procedure carried out by independent experts, whose object is the analysis of the operational methods and practices of a medical care facility (e.g. hospital, private clinic, general practitioner's or dentist's practice) which decided to assume the concept, implementation and control of its own quality policy. The whole accreditation procedure represents the basic structure of a continuous dynamic progressiveness within a cabinet eager to offer outstanding quality. Moreover, it guarantees active and voluntary participation of every single member of the medical administration or technical team involved in the realization of this primary objective. In other words, we are talking about a very strong dynamic innovation leading to a change of views and the improvement of communication means, while simultaneously enhancing the security and quality aspects of medical care. The continuous guarantee of high quality medical care calls for precise planning and systematization of actions. First of all, these actions are defined, analyzed and listed in precise work procedures. As they are defined with the agreement of the whole team, they implicate respect and self control. This requires of course transparency of the treatment methods, whose different steps and procedures are described in detail in a logogramm set up in common.

  4. An evaluation of the strategic approach to the rehabilitation of traumatic brain injury (TBI) patients

    PubMed Central

    Tomaszewski, Wiesław; Mańko, Grzegorz

    2011-01-01

    Summary Background The objective of our study was to evaluate a goal-driven strategic plan for the step-by-step rehabilitation of traumatic brain injury (TBI) patients, with effectiveness measured in terms of quality of life, as compared to patients treated according to a standard, progressive rehabilitation program. Material/Methods We studied 40 patients after TBI awakened from a long-term coma. The patients were divided into two equal groups: a control group (n=20) involving patients treated before the introduction of the strategic approach, and an experimental group (n=20) involving patients rehabilitated under the strategic approach. In evaluating the effectiveness of rehabilitation we used a structured interview with clinical observation and a scale for assessing the quality of life of patients after TBI. Results The deterioration in the quality of life of TBI patients is mainly related to difficulties in satisfying physiological needs, self-care, reduced mobility and disorders of cognitive, regulatory, and social functions. In both groups, the feature most susceptible to rehabilitation related change was movement, while the least susceptible functions were associated with the use of different means of transport. This change is significantly greater in persons in the experimental group, as compared to controls. Conclusions We found that a rehabilitation program controlled by a strategic plan, with the cooperation of the patient, is more effective in improving the quality of life, as the patient is more self-motivated to individually designed objectives. PMID:21873948

  5. Study of Material Used in Nanotechnology for the Recycling of Industrial Waste Water

    NASA Astrophysics Data System (ADS)

    Larbi, L.; Fertikh, N.; Toubal, A.

    The objective of our study is to recycle the industrial waste water of a industrial Complex after treatment by the bioprocess MBR (membrane bioreactor). In order to apply this bioprocess, the water quality in question was first of all studied. To characterize this industrial waste water, a series of physicochemical analysis was carried out according to standardized directives and methods. Following-up the water quality to meet the regulatory requirements with rejection of this industrial waste water, a study was done thanks to the permanently monitoring of the following relevant parameters(P): the flow, the potential of hydrogen (pH), the total suspended solids(TSS), the turbidity (Turb), the chemical oxygen demand (COD),the biochemical oxygen demand (BOD), the Kjeldahl total nitrogen (KTN) and ammonia (NH4+), the total phosphorus (Ptot), the fluorine (F), the oils (O), the fats (F) and the phenols (Ph). According to collected information, it was established the sampling rates to which the quality control was done, the selected analytical methods were validated by the control charts and the analysis test number was determined by the Cochran test. The results of the quality control show that some rejected water contents are not in the Algerian standards, but, in our case, the objective is the preoccupation for a standard setting of these industrial water parameters so as to recycle it. The process adopted by MBR for waste water treatment is being studied, first in the development of the experimental characterizing of the reactor and the selected membrane.

  6. The Modern Measurement Technology And Checking Of Shafs Parameters

    NASA Astrophysics Data System (ADS)

    Tichá, Šárka; Botek, Jan

    2015-12-01

    This paper is focused on rationalization checking parameters of shaft in companies engaged in the production of components of electric motors, wind turbines and vacuum systems. Customers increasing constantly their requirements to ensure the overall quality of the product, i.e. the quality of machining, dimensional and shape accuracy and overall purity of the subscribed products. The aim of this paper is to introduce using modern measurement technology in controlling these components and compare the results with existing control methodology. The main objective of this rationalization is to eliminate mistakes and shortcomings of current inspection methods.

  7. Comparison of Laboratory and Field Density of Asphalt Mixtures

    DOT National Transportation Integrated Search

    1991-01-01

    The objective of this paper is to investigate the relationships between the measured density of the mixture obtained in the mix design, during quality control of the mixture (laboratory compaction of field produced mix), after initial compaction (cor...

  8. [Systematic review and Meta-analysis of Shenqi Fuzheng injection combined with first-line chemotherapy for non-small cell lung cancer].

    PubMed

    Hao, Teng-teng; Xie, Yan-ming; Liao, Xing; Wang, Jing

    2015-10-01

    The paper is to systematically evaluate the effect and safety of Shenqi Fuzheng injection (SFI) combined with first-line chemotherapy for non-small cell lung cancer (NSCLC). Randomized controlled trials (RCTs) on Shenqi Fuzheng injection (SFI) combined with first-line chemotherapy (experiment group) and chemotherapy alone group ( control group) were electronically retrieved from Medline, EMbase, Clinical Trials, Cochrane Library, CBM, CNKI, VIP, and Wanfang Data base. All trials were assessed for quality according to the Cochrane Reviewer's Handbook for Systematic Reviews of Intervention and then Meta-analysis was performed withRevMan5. 2 Software. A total of 43 RCTs (3433 patients) were included after screening and selecting. Results of Meta-analysis showed that: Objective remission rate (ORR): ORR of experimental group was about 20% higher than that of control group [RR = 1.23, 95% CI (1.11,1.35), P < 0.0001]. Disease control rate (DCR):DCR of SFI combined with first-line chemotherapy was 11% higher than that of first-line chemotherapy alone [RR = 1.11, 95% CI (1.07, 1.16), P < 0.000 01]. Life quality evaluated by Kosovan performance status (KPS) showed that: life quality improvement rate of experimental group was about twice of that in control group [RR = 2.02, 95% CI (1.81, 2.26), P < 0.000 01]. Toxic and side reaction analysis showed that: the incidence of side reactions in experimental group was about 50% lower than that in control group [RR = 0.59, 95% CI (0.53, 0.66), P < 0.000 01]. Immune function test showed that: the function of experimental group was 3.2 (standard deviations) times greater than that of control group [MD = 3.23, 95% CI (2.86, 3.60), P < 0.000 01]. We can see that SFI combined with first-line chemotherapy for NSCLC can increase objective efficacy, improve life quality, decrease toxic and side reactionsinduced by chemotherapy, and improve the immune functions. As most of the included studies in this systematic evaluation had poor quality, the evidence to support conclusion was weak, so it was necessary to conduct more multi-center clinical trials with high quality methods and rigorous design.

  9. Further Development, Support and Enhancement of CONDUIT

    NASA Technical Reports Server (NTRS)

    Veronica, Moldoveanu; Levine, William S.

    1999-01-01

    From the first airplanes steered by handles, wheels, and pedals to today's advanced aircraft, there has been a century of revolutionary inventions, all of them contributing to flight quality. The stability and controllability of aircraft as they appear to a pilot are called flying or handling qualities. Many years after the first airplanes flew, flying qualities were identified and ranked from desirable to unsatisfactory. Later on engineers developed design methods to satisfy these practical criteria. CONDUIT, which stands for Control Designer's Unified Interface, is a modern software package that provides a methodology for optimization of flight control systems in order to improve the flying qualities. CONDUIT is dependent on an the optimization engine called CONSOL-OPTCAD (C-O). C-O performs multicriterion parametric optimization. C-O was successfully tested on a variety of control problems. The optimization-based computational system, C-O, requires a particular control system description as a MATLAB file and possesses the ability to modify the vector of design parameters in an attempt to satisfy performance objectives and constraints specified by the designer, in a C-type file. After the first optimization attempts on the UH-60A control system, an early interface system, named GIFCORCODE (Graphical Interface for CONSOL-OPTCAD for Rotorcraft Controller Design) was created.

  10. System of error detection in the manufacture of garments using artificial vision

    NASA Astrophysics Data System (ADS)

    Moreno, J. J.; Aguila, A.; Partida, E.; Martinez, C. L.; Morales, O.; Tejeida, R.

    2017-12-01

    A computer vision system is implemented to detect errors in the cutting stage within the manufacturing process of garments in the textile industry. It provides solution to errors within the process that cannot be easily detected by any employee, in addition to significantly increase the speed of quality review. In the textile industry as in many others, quality control is required in manufactured products and this has been carried out manually by means of visual inspection by employees over the years. For this reason, the objective of this project is to design a quality control system using computer vision to identify errors in the cutting stage within the garment manufacturing process to increase the productivity of textile processes by reducing costs.

  11. Wing Shaping and Gust Load Controls of Flexible Aircraft: An LPV Approach

    NASA Technical Reports Server (NTRS)

    Hammerton, Jared R.; Su, Weihua; Zhu, Guoming; Swei, Sean Shan-Min

    2018-01-01

    In the proposed paper, the optimum wing shape of a highly flexible aircraft under varying flight conditions will be controlled by a linear parameter-varying approach. The optimum shape determined under multiple objectives, including flight performance, ride quality, and control effort, will be determined as well. This work is an extension of work done previously by the authors, and updates the existing optimization and utilizes the results to generate a robust flight controller.

  12. Comparison of the performance of intraoral X-ray sensors using objective image quality assessment.

    PubMed

    Hellén-Halme, Kristina; Johansson, Curt; Nilsson, Mats

    2016-05-01

    The main aim of this study was to evaluate the performance of 10 individual sensors of the same make, using objective measures of key image quality parameters. A further aim was to compare 8 brands of sensors. Ten new sensors of 8 different models from 6 manufacturers (i.e., 80 sensors) were included in the study. All sensors were exposed in a standardized way using an X-ray tube voltage of 60 kVp and different exposure times. Sensor response, noise, low-contrast resolution, spatial resolution and uniformity were measured. Individual differences between sensors of the same brand were surprisingly large in some cases. There were clear differences in the characteristics of the different brands of sensors. The largest variations were found for individual sensor response for some of the brands studied. Also, noise level and low contrast resolution showed large variations between brands. Sensors, even of the same brand, vary significantly in their quality. It is thus valuable to establish action levels for the acceptance of newly delivered sensors and to use objective image quality control for commissioning purposes and periodic checks to ensure high performance of individual digital sensors. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. Simulation of intelligent object behavior in a virtual reality system

    NASA Astrophysics Data System (ADS)

    Mironov, Sergey F.

    1998-01-01

    This article presents a technique for computer control of a power boat movement in real-time marine trainers or arcade games. The author developed and successfully implemented a general technique allowing intellectual navigation of computer controlled moving objects that proved to be appropriate for real-time applications. This technique covers significant part of necessary behavioral tasks that appear in such titles. At the same time the technique forms a part of a more general system that involves control of less complicated characters of another nature. The system being an open one can be easily used by an action or arcade programming to improve the overall quality of characters artificial intelligence style.

  14. Study of continuous-wave domain fluorescence diffuse optical tomography for quality control on agricultural produce

    NASA Astrophysics Data System (ADS)

    Nadhira, Vebi; Kurniadi, Deddy; Juliastuti, E.; Sutiswan, Adeline

    2014-03-01

    The importance of monitoring the quality of vegetables and fruits is prosperity by giving a competitive advantage for producer and providing a more healthy food for consumer. Diffuse Optical Tomography (DOT) is offering the possibility to detect the internal defects of the agricultural produce quality. Fluorescence diffuse optical tomography (FDOT) is the development of DOT, offering the possibilities to improve spatial resolution and to contrast image. The purpose of this research is to compare FDOT and DOT in forward analysis with continuous wave approach. The scattering and absorbing parameters of potatoes are used to represent the real condition. The object was illuminated by the NIR source from some positions on the boundary of object. A set of NIR detector are placed on the peripheral position of the object to measure the intensity of propagated or emitted light. In the simulation, we varied a condition of object then we analyzed the sensitivity of forward problem. The result of this study shows that FDOT has a better sensitivity than DOT and a better potential to monitor internal defects of agricultural produce because of the contrast value between optical and fluorescence properties of agricultural produce normal tissue and defects.

  15. The relationship between patient object relations and the therapeutic alliance in a naturalistic psychotherapy sample.

    PubMed

    Errázuriz, Paula; Constantino, Michael J; Calvo, Esteban

    2015-09-01

    This study examined the relationship between patients' object relations and interpersonal process in psychotherapy. Namely, we tested the hypothesis that the quality of patients' object relations is positively associated with both patient- and therapist-rated alliance quality. Psychotherapy was administered naturalistically, with quantitative data collection before and during treatment. Participants included 73 adult outpatients and 23 therapists at two mental health clinics. Using the Bell Object Relations and Reality Testing Inventory, we measured four dimensions of patients' object relations at baseline-alienation, insecure attachment, egocentricity, and social incompetence. Using the Working Alliance Inventory, we measured alliance from patient and therapist perspectives. Control variables included time, patient demographics, symptom severity, and clinic. We employed hierarchical linear modelling to analyse data with a nested structure, with 138 sessions at Level 1, 73 patients at Level 2, and 23 therapists at Level 3. Patient alienation and insecure attachment were associated with lower patient-rated alliance, while egocentricity was associated with higher patient-rated alliance. Patients' object relations were not significantly associated with therapist-rated alliance. On average, patients perceived the alliance more positively than their therapists, with a weak positive correlation between the alliance perspectives. The results suggest that object relation dimensions may be important patient characteristics for forecasting therapeutic relationship quality. They also call for more attention to differences between alliance rating perspectives. Treatment may benefit from more attention to the quality of patients' object relations. If patients present with high levels of alienation and insecure attachment, therapists may need to pay especially close attention to the therapeutic alliance, and prudently address any ruptures in its quality. When monitoring the alliance quality, it is important to consider that patients and therapists may have different perspectives. Therapists relying solely on their own perceptions are at risk of missing alliance difficulties, and patients' object relations may be uniquely predictive of their own sense of the alliance. Therefore, it may be helpful to ask patients in session and through standardized measures for feedback on how they perceive the goals and tasks of treatment and the emotional bond with their therapist. Again, any alliance tensions could then be addressed directly as a means to maintaining engagement in the service of better outcome. © 2014 The British Psychological Society.

  16. Facility versus unit level reporting of quality indicators in nursing homes when performance monitoring is the goal

    PubMed Central

    Norton, Peter G; Murray, Michael; Doupe, Malcolm B; Cummings, Greta G; Poss, Jeff W; Squires, Janet E; Teare, Gary F; Estabrooks, Carole A

    2014-01-01

    Objectives To demonstrate the benefit of defining operational management units in nursing homes and computing quality indicators on these units as well as on the whole facility. Design Calculation of adjusted Resident Assessment Instrument – Minimum Data Set 2.0 (RAI–MDS 2.0) quality indicators for: PRU05 (prevalence of residents with a stage 2–4 pressure ulcer), PAI0X (prevalence of residents with pain) and DRG01 (prevalence of residents receiving an antipsychotic with no diagnosis of psychosis), for quarterly assessments between 2007 and 2011 at unit and facility levels. Comparisons of these risk-adjusted quality indicators using statistical process control (control charts). Setting A representative sample of 30 urban nursing homes in the three Canadian Prairie Provinces. Measurements Explicit decision rules were developed and tested to determine whether the control charts demonstrated improving, worsening, unchanging or unclassifiable trends over the time period. Unit and facility performance were compared. Results In 48.9% of the units studied, unit control chart performance indicated different changes in quality over the reporting period than did the facility chart. Examples are provided to illustrate that these differences lead to quite different quality interventions. Conclusions Our results demonstrate the necessity of considering facility-level and unit-level measurement when calculating quality indicators derived from the RAI–MDS 2.0 data, and quite probably from any RAI measures. PMID:24523428

  17. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malkoske, Kyle; Nielsen, Michelle; Brown, Erika

    The Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) have worked together in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment and technologies, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. Early community engagement and uptake survey data showed 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing the way Canadian radiation treatmentmore » centres run their technical quality control programs. As the TQC development framework matured as a cross-country initiative, guidance documents have been developed in many clinical technologies. Recently, there have been new TQC documents initiated for Gamma Knife and Cyberknife technologies where the entire communities within Canada are involved in the review process. At the same time, QARSAC reviewed the suite as a whole for the first time and it was found that some tests and tolerances overlapped across multiple documents as single tests could pertain to multiple quality control areas. The work to streamline the entire suite has allowed for improved usability of the suite while keeping the integrity of single quality control areas. The suite will be published by the JACMP, in the coming year.« less

  18. Has compliance with CLIA requirements really improved quality in US clinical laboratories?

    PubMed

    Ehrmeyer, Sharon S; Laessig, Ronald H

    2004-08-02

    The Clinical Laboratory Improvement Amendments of 1988 (CLIA'88) mandate universal requirements for all U.S. clinical laboratory-testing sites. The intent of CLIA'88 is to ensure quality testing through a combination of minimum quality practices that incorporate total quality management concepts. These regulations do not contain established, objective indicators or measures to assess quality. However, there is an implicit assumption that compliance with traditionally accepted good laboratory practices--following manufacturers' directions, routinely analysing quality control materials, applying quality assurance principles, employing and assessing competent testing personnel, and participating in external quality assessment or proficiency testing (PT)--will result in improved test quality. The CLIA'88 regulations do include PT performance standards, which intentionally or unintentionally, define intra-laboratory performance. Passing PT has become a prime motivation for improving laboratory performance; it can also be used as an objective indicator to assess whether compliance to CLIA has improved intra-laboratory quality. Data from 1994 through 2002 indicate that the percentage of laboratories passing PT has increased. In addition to PT performance, subjective indicators of improved quality--frequency of inspection deficiencies, the number of government sanctions for non-compliance, and customer satisfaction--were evaluated. The results from these subjective indicators are more difficult to interpret but also seem to show improved quality in US clinical laboratories eleven years post-CLIA'88.

  19. Economic evaluations and their use in infection prevention and control: a narrative review.

    PubMed

    Rennert-May, Elissa; Conly, John; Leal, Jenine; Smith, Stephanie; Manns, Braden

    2018-01-01

    The objective of this review is to provide a comprehensive overview of the different types of economic evaluations that can be utilized by Infection Prevention and Control practitioners with a particular focus on the use of the quality adjusted life year, and its associated challenges. We also highlight existing economic evaluations published within Infection Prevention and Control, research gaps and future directions. Narrative Review. To date the majority of economic evaluations within Infection Prevention and Control are considered partial economic evaluations. Acknowledging the challenges, which include variable utilities within infection prevention and control, a lack of randomized controlled trials, and difficulty in modelling infectious diseases in general, future economic evaluation studies should strive to be consistent with published guidelines for economic evaluations. This includes the use of quality adjusted life years. Further research is required to estimate utility scores of relevance within Infection Prevention and Control.

  20. jqcML: an open-source java API for mass spectrometry quality control data in the qcML format.

    PubMed

    Bittremieux, Wout; Kelchtermans, Pieter; Valkenborg, Dirk; Martens, Lennart; Laukens, Kris

    2014-07-03

    The awareness that systematic quality control is an essential factor to enable the growth of proteomics into a mature analytical discipline has increased over the past few years. To this aim, a controlled vocabulary and document structure have recently been proposed by Walzer et al. to store and disseminate quality-control metrics for mass-spectrometry-based proteomics experiments, called qcML. To facilitate the adoption of this standardized quality control routine, we introduce jqcML, a Java application programming interface (API) for the qcML data format. First, jqcML provides a complete object model to represent qcML data. Second, jqcML provides the ability to read, write, and work in a uniform manner with qcML data from different sources, including the XML-based qcML file format and the relational database qcDB. Interaction with the XML-based file format is obtained through the Java Architecture for XML Binding (JAXB), while generic database functionality is obtained by the Java Persistence API (JPA). jqcML is released as open-source software under the permissive Apache 2.0 license and can be downloaded from https://bitbucket.org/proteinspector/jqcml .

  1. Assessment of the iodine concentration in table salt at the production stage in South Africa.

    PubMed Central

    Jooste, Pieter L.

    2003-01-01

    OBJECTIVE: To determine the iodine content of iodized salt at the production stage, to assess the perceptions and knowledge of salt producers about the prevention and control of iodine deficiency, and to examine the internal quality control procedures used during iodization in South Africa. METHOD: Salt samples were collected for iodine analysis by titration from the 12 producers iodizing salt in South Africa. Information on the producers' knowledge of iodine deficiency disorders and on internal quality control was obtained by means of questionnaires. FINDINGS: The legal requirement of 40-60 ppm iodine was met in 30.9% of salt samples; 57.9% contained more than 30 ppm iodine; 34.8% contained under 20 ppm iodine. There were shortcomings in perceptions and knowledge about iodine deficiency disorders and in the internal quality control procedures of a substantial proportion of the producers. CONCLUSION: In order to encourage and support salt producers to achieve optimal iodization there should be an information, education and communication strategy aimed at improving knowledge of iodine deficiency disorders and at raising the standard of internal quality control procedures. External monitoring should continue. PMID:12973644

  2. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jonathan Helmus, Scott Collis

    The Python-ARM Radar Toolkit (Py-ART) is a collection of radar quality control and retrieval codes which all work on two unifying Python objects: the PyRadar and PyGrid objects. By building ingests to several popular radar formats and then abstracting the interface Py-ART greatly simplifies data processing over several other available utilities. In addition Py-ART makes use of Numpy arrays as its primary storage mechanism enabling use of existing and extensive community software tools.

  3. Modifying the Sleep Treatment Education Program for Students to include technology use (STEPS-TECH): Intervention effects on objective and subjective sleep outcomes.

    PubMed

    Barber, Larissa K; Cucalon, Maria S

    2017-12-01

    University students often have sleep issues that arise from poor sleep hygiene practices and technology use patterns. Yet, technology-related behaviors are often neglected in sleep hygiene education. This study examined whether the Sleep Treatment Education Program for Students-modified to include information regarding managing technology use (STEPS-TECH)-helps improve both subjective and objective sleep outcomes among university students. Results of an experimental study among 78 university students showed improvements in objective indicators of sleep quantity (total sleep time) and sleep quality (less awakenings) during the subsequent week for students in the STEPS-TECH intervention group compared to a control group. Exploratory analyses indicated that effects were driven by improvements in weekend days immediately following the intervention. There were also no intervention effects on subjective sleep quality or quantity outcomes. In terms of self-reported behavioral responses to educational content in the intervention, there were no group differences in sleep hygiene practices or technology use before bedtime. However, the intervention group reported less technology use during sleep periods than the control group. These preliminary findings suggest that STEPS-TECH may be a useful educational tool to help improve objective sleep and reduce technology use during sleep periods among university students. Copyright © 2017 John Wiley & Sons, Ltd.

  4. Sleep quality and arousal in migraine and tension-type headache: the headache-sleep study.

    PubMed

    Engstrøm, M; Hagen, K; Bjørk, M H; Stovner, L J; Sand, T

    2014-01-01

    The present paper summarizes and compares data from our studies on subjective and objective sleep quality and pain thresholds in tension-type headache (TTH), migraine, and controls. In a blinded controlled explorative study, we recorded polysomnography (PSG) and pressure, heat, and cold pain thresholds in 34 controls, 20 TTH, and 53 migraine patients. Sleep quality was assessed by questionnaires, sleep diaries, and PSG. Migraineurs who had their recordings more than 2 days from an attack were classified as interictal while the rest were classified as either preictal or postictal. Interictal migraineurs (n=33) were also divided into two groups if their headache onsets mainly were during sleep and awakening (sleep migraine, SM), or during daytime and no regular onset pattern (non-sleep migraine, NSM). TTH patients were divided into a chronic or episodic group according to headache days per month. Compared to controls, all headache groups reported more anxiety and sleep-related symptoms. TTH and NSM patients reported more daytime tiredness and tended to have lower pain thresholds. Despite normal sleep times in diary, TTH and NSM had increased slow-wave sleep as seen after sleep deprivation. Migraineurs in the preictal phase had shorter latency to sleep onset than controls. Except for a slight but significantly increased awakening index SM, patients differed little from controls in objective measurements. We hypothesize that TTH and NSM patients on the average need more sleep than healthy controls. SM patients seem more susceptible to sleep disturbances. Inadequate rest might be an attack-precipitating- and hyperalgesia-inducing factor. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. APPLICATION OF DATA QUALITY OBJECTIVES AND MEASUREMENT QUALITY OBJECTIVES TO RESEARCH PROJECTS

    EPA Science Inventory

    The paper assists systematic planning for research projects. It presents planning concepts in terms that have some utility for researchers. For example, measurement quality objectives are more familiar to researchers than data quality objectives because these quality criteria are...

  6. [Application of adaptive canceling methods in temperature control in ultrasonic therapeutical treatment].

    PubMed

    Deng, Jun; Liu, Du-ren

    2002-12-01

    Objective. To improve the quality of ultrasonic therapeutical treatment by improving the accuracy of temperature control. Method. Adaptive canceling methods were used to reduce the noise of temperature signal gained, and enhance signal-to-noise ratio. Result. The test's result corresponds basically to the theoretical curve. Conclusion. Adaptive canceling methods can be applied to clinic treatment.

  7. Recent Developments in Hyperspectral Imaging for Assessment of Food Quality and Safety

    PubMed Central

    Huang, Hui; Liu, Li; Ngadi, Michael O.

    2014-01-01

    Hyperspectral imaging which combines imaging and spectroscopic technology is rapidly gaining ground as a non-destructive, real-time detection tool for food quality and safety assessment. Hyperspectral imaging could be used to simultaneously obtain large amounts of spatial and spectral information on the objects being studied. This paper provides a comprehensive review on the recent development of hyperspectral imaging applications in food and food products. The potential and future work of hyperspectral imaging for food quality and safety control is also discussed. PMID:24759119

  8. Effectiveness of Positioning Stents in Radiation-Induced Xerostomia in Patients with Tongue Carcinoma: A Randomized Controlled Trial.

    PubMed

    Mall, Priyanka; Chand, Pooran; Singh, Balendra Pratap; Rao, Jitendra; Siddarth, Ramashanker; Srivastava, Kirti

    2016-01-01

    The aim of this study was to perform an objective and subjective evaluation of the efficacy of positioning stents in radiation-induced xerostomia in patients with tongue carcinoma. A total of 30 patients with tongue carcinoma and undergoing conventional radiotherapy were randomly assigned to control (n = 15) and study (n = 15) groups, without and with a positioning stent, respectively. Assessment of salivary output reduction was done before and after radiotherapy, at 3- and 6-month intervals, by measurement of unstimulated and stimulated salivary flow rates (objective evaluation). Xerostomia (subjective evaluation) was noted using six items from the Quality of Life Head and Neck Module (QLQ-H&N35) as proposed by the European Organization for Research and Treatment of Cancer. The significance level was set at .05. Mean unstimulated and stimulated salivary flow rates at 3- and 6-month intervals revealed significantly (P < .05) higher scores for the study group as compared with the control group. The mean quality of life scores in the study group were significantly (P < .05) lower compared with the control group. The use of a positioning stent minimized radiation-induced xerostomia and its symptoms.

  9. Obsolescence, Weeding, and the Utilization of Space.

    ERIC Educational Resources Information Center

    Lancaster, F. W.

    1988-01-01

    Suggests an objective approach to weeding library materials and discusses ways of measuring obsolescence and of controlling variables to provide a true picture of aging. Weeding is shown to improve space utilization and the quality of a collection. (5 references) (MES)

  10. An Introduction to Database Structure and Database Machines.

    ERIC Educational Resources Information Center

    Detweiler, Karen

    1984-01-01

    Enumerates principal management objectives of database management systems (data independence, quality, security, multiuser access, central control) and criteria for comparison (response time, size, flexibility, other features). Conventional database management systems, relational databases, and database machines used for backend processing are…

  11. Multi-objective optimisation of wastewater treatment plant control to reduce greenhouse gas emissions.

    PubMed

    Sweetapple, Christine; Fu, Guangtao; Butler, David

    2014-05-15

    This study investigates the potential of control strategy optimisation for the reduction of operational greenhouse gas emissions from wastewater treatment in a cost-effective manner, and demonstrates that significant improvements can be realised. A multi-objective evolutionary algorithm, NSGA-II, is used to derive sets of Pareto optimal operational and control parameter values for an activated sludge wastewater treatment plant, with objectives including minimisation of greenhouse gas emissions, operational costs and effluent pollutant concentrations, subject to legislative compliance. Different problem formulations are explored, to identify the most effective approach to emissions reduction, and the sets of optimal solutions enable identification of trade-offs between conflicting objectives. It is found that multi-objective optimisation can facilitate a significant reduction in greenhouse gas emissions without the need for plant redesign or modification of the control strategy layout, but there are trade-offs to consider: most importantly, if operational costs are not to be increased, reduction of greenhouse gas emissions is likely to incur an increase in effluent ammonia and total nitrogen concentrations. Design of control strategies for a high effluent quality and low costs alone is likely to result in an inadvertent increase in greenhouse gas emissions, so it is of key importance that effects on emissions are considered in control strategy development and optimisation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Causes of cine image quality deterioration in cardiac catheterization laboratories.

    PubMed

    Levin, D C; Dunham, L R; Stueve, R

    1983-10-01

    Deterioration of cineangiographic image quality can result from malfunctions or technical errors at a number of points along the cine imaging chain: generator and automatic brightness control, x-ray tube, x-ray beam geometry, image intensifier, optics, cine camera, cine film, film processing, and cine projector. Such malfunctions or errors can result in loss of image contrast, loss of spatial resolution, improper control of film optical density (brightness), or some combination thereof. While the electronic and photographic technology involved is complex, physicians who perform cardiac catheterization should be conversant with the problems and what can be done to solve them. Catheterization laboratory personnel have control over a number of factors that directly affect image quality, including radiation dose rate per cine frame, kilovoltage or pulse width (depending on type of automatic brightness control), cine run time, selection of small or large focal spot, proper object-intensifier distance and beam collimation, aperture of the cine camera lens, selection of cine film, processing temperature, processing immersion time, and selection of developer.

  13. Effect of Food Waste Co-Digestion on Digestion, Dewatering, and Cake Quality.

    PubMed

    Higgins, Matthew; Rajagopalan, Ganesh; Miller, Andre; Brown, Jeffrey; Beightol, Steven

    2017-01-01

      The objective of this study was to evaluate the effect of food waste addition on anaerobic digestion performance as well as downstream parameters including dewatering, cake quality, and filtrate quality. Laboratory-scale digesters were fed processed food waste at rates of 25%, 45%, and 65% increased chemical oxygen demand (COD) loading rates compared to a control fed only primary and secondary solids. The specific methane yield increased from 370 L CH4/kg VSadded for the control to 410, 440, and 470 L CH4/kg VSadded for the 25, 45, and 65% food waste addition, respectively. The cake solids after dewatering were all higher for the food waste digesters compared to the control, with the highest cake solids being measured for the 45% food-waste loading. Compared to the control digester, the biosolids odorant concentration increased for the lowest dose of food waste. Odorant concentrations were below detection for the highest food waste loading.

  14. What Does it Mean to Publish Data in Earth System Science Data Journal?

    NASA Astrophysics Data System (ADS)

    Carlson, D.; Pfeiffenberger, H.

    2015-12-01

    The availability of more than 120 data sets in ESSD represents an unprecedented effort by providers, data centers and ESSD. ESSD data sets and their accompanying data descriptions undergo rigorous review. The data sets reside at any of more than 20 cooperating data centers. The ESSD publication process depends on but challenges the concepts of digital object identification and exacerbates the varied interpretations of the phrase 'data publication'. ESSD adopts the digital object identifier (doi). Key questions apply to doi's and other identifiers. How will persistent identifiers point accurately to distributed or replicated data? How should data centers and data publishers use identifier technologies to ensure authenticity and integrity? Should metadata associated with identifiers distinguish among raw, quality controlled and derived data processing levels, or indicate license or copyright status?Data centers publish data sets according to internal metadata standards but without indicators of quality control. Publication in this sense indicates availability. National data portals compile, serve and publish data products as a service to national researchers and, often, to meet national requirements. Publication in this second case indicates availability in a national context; the data themselves may still reside at separate data centers. Data journals such as ESSD or Scientific Data publish peer-reviewed, quality controlled data sets. These data sets almost always reside at a separate data center - the journal and the center maintain explicit identifier linkages. Data journals add quality to the feature of availability. A single data set processed through these layers will generate three independent doi's but the doi's will provide little information about availability or quality. Could the data world learn from the URL world to consider additions? Suffixes? Could we use our experience with processing levels or data maturity to propose and agree such extensions?

  15. Flexible optical metrology strategies for the control and quality assurance of small series production

    NASA Astrophysics Data System (ADS)

    Schmitt, R.; Pavim, A.

    2009-06-01

    The demand for achieving smaller and more flexible production series with a considerable diversity of products complicates the control of the manufacturing tasks, leading to big challenges for the quality assurance systems. The quality assurance strategy that is nowadays used for mass production is unable to cope with the inspection flexibility needed among automated small series production, because the measuring strategy is totally dependent on the fixed features of the few manufactured object variants and on process parameters that can be controlled/compensated during production time. The major challenge faced by a quality assurance system applied to small series production facilities is to guarantee the needed quality level already at the first run, and therefore, the quality assurance system has to adapt itself constantly to the new manufacturing conditions. The small series production culture requires a change of paradigms, because its strategies are totally different from mass production. This work discusses the tight inspection requirements of small series production and presents flexible metrology strategies based on optical sensor data fusion techniques, agent-based systems as well as cognitive and self-optimised systems for assuring the needed quality level of flexible small series. Examples of application scenarios are provided among the automated assembly of solid state lasers and the flexible inspection of automotive headlights.

  16. Active control of aerothermoelastic effects for a conceptual hypersonic aircraft

    NASA Technical Reports Server (NTRS)

    Heeg, Jennifer; Gilbert, Michael G.; Pototzky, Anthony S.

    1990-01-01

    This paper describes the procedures for an results of aeroservothermoelastic studies. The objectives of these studies were to develop the necessary procedures for performing an aeroelastic analysis of an aerodynamically heated vehicle and to analyze a configuration in the classical 'cold' state and in a 'hot' state. Major tasks include the development of the structural and aerodynamic models, open loop analyses, design of active control laws for improving dynamic responses and analyses of the closed loop vehicles. The analyses performed focused on flutter speed calculations, short period eigenvalue trends and statistical analyses of the vehicle response to controls and turbulence. Improving the ride quality of the vehicle and raising the flutter boundary of the aerodynamically-heated vehicle up to that of the cold vehicle were the objectives of the control law design investigations.

  17. Quality of life and satisfaction with treatment in subjects with type 2 diabetes: results in Spain of the PANORAMA study.

    PubMed

    Depablos-Velasco, Pedro; Salguero-Chaves, Emilio; Mata-Poyo, Julio; Derivas-Otero, Beatriz; García-Sánchez, Ricardo; Viguera-Ester, Pablo

    2014-01-01

    Few studies are available on quality of life and treatment satisfaction of patients with type 2 diabetes mellitus (T2DM). Both of them were the primary objectives of the PANORAMA (NCT00916513) study. Metabolic control, treatment patterns, and management by healthcare professionals were also evaluated. This multicenter, cross-sectional, observational study randomly recruited>40 year-old patients with T2DM from Spanish healthcare centers. HbA1c was measured using the same technique in all patients, who also completed quality of life (EQ-5D and ADDQoL) and treatment satisfaction (DTSQ) questionnaires and the Hypoglycemia Fear Survey (HFS-II). Fifty-four investigators recruited 751 patients, 60.3% of whom had HbA1c levels <7%. Approximately 25% of patients on monotherapy had HbA1c values ≥ 7%, Patients with longer disease duration and more complex treatments, especially with insulin, showed the poorer control. Despite good overall treatment satisfaction (mean 29.3±6.1, 0 to 36-point scale), patients with a poorer metabolic control, previous hypoglycemia episodes, and more complex therapies had a worse QoL and a greater fear of suffering hypoglycemia. Despite advances in metabolic control, there are still areas to improve. Early addition of safe drugs to monotherapy would help achieve control objectives without increasing the risk of hypoglycemia, and delaying the start of insulin therapy. This would also improve QoL and treatment satisfaction. Copyright © 2013 SEEN. Published by Elsevier Espana. All rights reserved.

  18. Sleep disturbances in patients with major depressive disorder: incongruence between sleep log and actigraphy.

    PubMed

    Kung, Pei-Ying; Chou, Kuei-Ru; Lin, Kuan-Chia; Hsu, Hsin-Wei; Chung, Min-Huey

    2015-02-01

    Depression has become a severe global health problem, and sleeping difficulties are typically associated with depression. The purpose of this study was to investigate the relationships among subjective sleep quality, objective sleep quality, and the sleep hygiene practices of hospitalized patients with major depressive disorder. Daily sleep logs and actigraphy were used to obtain subjective and objective sleep data. Thirty patients were recruited from a regional teaching hospital in Taipei and completed the Hamilton Rating Scale for Depression and the Sleep Hygiene Practice Scale. Significant differences were found between subjective and objective sleep data in patients with major depressive disorder (MDD). For patients with more severe depression, subjective measurements obtained using sleep logs, such as total sleep time and sleep efficiency, were significantly lower than those obtained using actigraphy by controlling for demographics. The results regarding the differences between subjective and objective sleep data can be a reference for care providers when comforting depression patients who complain of sleep disturbance. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. Application of multi-objective controller to optimal tuning of PID gains for a hydraulic turbine regulating system using adaptive grid particle swam optimization.

    PubMed

    Chen, Zhihuan; Yuan, Yanbin; Yuan, Xiaohui; Huang, Yuehua; Li, Xianshan; Li, Wenwu

    2015-05-01

    A hydraulic turbine regulating system (HTRS) is one of the most important components of hydropower plant, which plays a key role in maintaining safety, stability and economical operation of hydro-electrical installations. At present, the conventional PID controller is widely applied in the HTRS system for its practicability and robustness, and the primary problem with respect to this control law is how to optimally tune the parameters, i.e. the determination of PID controller gains for satisfactory performance. In this paper, a kind of multi-objective evolutionary algorithms, named adaptive grid particle swarm optimization (AGPSO) is applied to solve the PID gains tuning problem of the HTRS system. This newly AGPSO optimized method, which differs from a traditional one-single objective optimization method, is designed to take care of settling time and overshoot level simultaneously, in which a set of non-inferior alternatives solutions (i.e. Pareto solution) is generated. Furthermore, a fuzzy-based membership value assignment method is employed to choose the best compromise solution from the obtained Pareto set. An illustrative example associated with the best compromise solution for parameter tuning of the nonlinear HTRS system is introduced to verify the feasibility and the effectiveness of the proposed AGPSO-based optimization approach, as compared with two another prominent multi-objective algorithms, i.e. Non-dominated Sorting Genetic Algorithm II (NSGAII) and Strength Pareto Evolutionary Algorithm II (SPEAII), for the quality and diversity of obtained Pareto solutions set. Consequently, simulation results show that this AGPSO optimized approach outperforms than compared methods with higher efficiency and better quality no matter whether the HTRS system works under unload or load conditions. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

  20. The impact of handwriting difficulties on compositional quality in children with developmental coordination disorder

    PubMed Central

    Barnett, Anna L; Wilmut, Kate; Plumb, Mandy S

    2016-01-01

    Introduction There is substantial evidence to support the relationship between transcription skills (handwriting and spelling) and compositional quality. For children with developmental coordination disorder, handwriting can be particularly challenging. While recent research has aimed to investigate their handwriting difficulties in more detail, the impact of transcription on their compositional quality has not previously been examined. The aim of this exploratory study was to examine compositional quality in children with developmental coordination disorder and to ascertain whether their transcription skills influence writing quality. Method Twenty-eight children with developmental coordination disorder participated in the study, with 28 typically developing age and gender matched controls. The children completed the ‘free-writing’ task from the detailed assessment of speed of handwriting tool, which was evaluated for compositional quality using the Wechsler objective language dimensions. Results The children with developmental coordination disorder performed significantly below their typically developing peers on five of the six Wechsler objective language dimensions items. They also had a higher percentage of misspelled words. Regression analyses indicated that the number of words produced per minute and the percentage of misspelled words explained 55% of the variance for compositional quality. Conclusion The handwriting difficulties so commonly reported in children with developmental coordination disorder have wider repercussions for the quality of written composition. PMID:27807392

  1. Preoperative versus postoperative ultrasound-guided rectus sheath block for improving pain, sleep quality and cytokine levels of patients with open midline incisions undergoing transabdominal gynaecological operation: study protocol for a randomised controlled trial.

    PubMed

    Jin, Feng; Li, Xiao-Qian; Tan, Wen-Fei; Ma, Hong; Lu, Huang-Wei

    2015-12-10

    Rectus sheath block (RSB) is used for postoperative pain relief in patients undergoing abdominal surgery with midline incision. Preoperative RSB has been shown to be effective, but it has not been compared with postoperative RSB. The aim of the present study is to evaluate postoperative pain, sleep quality and changes in the cytokine levels of patients undergoing gynaecological surgery with RSB performed preoperatively versus postoperatively. This study is a prospective, randomised, controlled (randomised, parallel group, concealed allocation), single-blinded trial. All patients undergoing transabdominal gynaecological surgery will be randomised 1:1 to the treatment intervention with general anaesthesia as an adjunct to preoperative or postoperative RSB. The objective of the trial is to evaluate postoperative pain, sleep quality and changes in the cytokine levels of patients undergoing gynaecological surgery with RSB performed preoperatively (n = 32) versus postoperatively (n = 32). All of the patients, irrespective of group allocation, will receive patient-controlled intravenous analgesia (PCIA) with oxycodone. The primary objective is to compare the interval between leaving the post-anaesthesia care unit and receiving the first PCIA bolus injection on the first postoperative night between patients who receive preoperative versus postoperative RSB. The secondary objectives will be to compare (1) cumulative oxycodone consumption at 24 hours after surgery; (2) postoperative sleep quality, as measured using a BIS-Vista monitor during the first night after surgery; and (3) cytokine levels (interleukin-1, interleukin-6, tumour necrosis factor-α and interferon-γ) during surgery and at 24 and 48 hours postoperatively. Clinical experience has suggested that RSB is a very effective postoperative analgesic technique, and we will answer the following questions with this trial. Do preoperative block and postoperative block have the same duration of analgesic effects? Can postoperative block extend the analgesic time? The results of this study could have actual clinical applications that could help to reduce postoperative pain and shorten hospital stays. Current Controlled Trials NCT02477098 15 June 2015.

  2. CellProfiler Tracer: exploring and validating high-throughput, time-lapse microscopy image data.

    PubMed

    Bray, Mark-Anthony; Carpenter, Anne E

    2015-11-04

    Time-lapse analysis of cellular images is an important and growing need in biology. Algorithms for cell tracking are widely available; what researchers have been missing is a single open-source software package to visualize standard tracking output (from software like CellProfiler) in a way that allows convenient assessment of track quality, especially for researchers tuning tracking parameters for high-content time-lapse experiments. This makes quality assessment and algorithm adjustment a substantial challenge, particularly when dealing with hundreds of time-lapse movies collected in a high-throughput manner. We present CellProfiler Tracer, a free and open-source tool that complements the object tracking functionality of the CellProfiler biological image analysis package. Tracer allows multi-parametric morphological data to be visualized on object tracks, providing visualizations that have already been validated within the scientific community for time-lapse experiments, and combining them with simple graph-based measures for highlighting possible tracking artifacts. CellProfiler Tracer is a useful, free tool for inspection and quality control of object tracking data, available from http://www.cellprofiler.org/tracer/.

  3. A framework to determine the locations of the environmental monitoring in an estuary of the Yellow Sea.

    PubMed

    Kim, Nam-Hoon; Hwang, Jin Hwan; Cho, Jaegab; Kim, Jae Seong

    2018-06-04

    The characteristics of an estuary are determined by various factors as like as tide, wave, river discharge, etc. which also control the water quality of the estuary. Therefore, detecting the changes of characteristics is critical in managing the environmental qualities and pollution and so the locations of monitoring should be selected carefully. The present study proposes a framework to deploy the monitoring systems based on a graphical method of the spatial and temporal optimizations. With the well-validated numerical simulation results, the monitoring locations are determined to capture the changes of water qualities and pollutants depending on the variations of tide, current and freshwater discharge. The deployment strategy to find the appropriate monitoring locations is designed with the constrained optimization method, which finds solutions by constraining the objective function into the feasible regions. The objective and constrained functions are constructed with the interpolation technique such as objective analysis. Even with the smaller number of the monitoring locations, the present method performs well equivalently to the arbitrarily and evenly deployed monitoring system. Copyright © 2018 Elsevier Ltd. All rights reserved.

  4. Identification of Ways to Improve Military Construction for Energy-Efficient Facilities.

    DTIC Science & Technology

    1987-12-01

    inservice . Thus, it is necessary to control techniques, materials, and equip- S ment as part of the Military Construction, Army (MCA) process to ensure...Moreover, USACE often lacks proper test equipment and trained personnel at many construction sites. The 0 result is that acceptance testing often is...on a few diagnostic procedures. USACE quality assurance inspectors would be trained to do the tests. .-. Objectives 0 The overall objective of this

  5. Modeling Department of Defense controlled atmosphere transshipments for forward deployed forces

    DOT National Transportation Integrated Search

    1998-03-01

    The objective of this thesis is to explore the cost savings, product quality improvement, and process efficiencies that can be realized by the integrated design and application of an innovative logistics system for the purchase and transshipment of f...

  6. Measurement and Control Strategies for Sterol Glucosides to Improve Biodiesel Quality - Year 2

    DOT National Transportation Integrated Search

    2011-02-01

    This project had the objective of measuring trace compounds in biodiesel called sterol glucosides (SG) so strategies to reduce their concentration could be investigated. A MALDI-TOF-MS (matrix assisted laser desorption ionization time of flight mass ...

  7. Sibling Relationships among Children with ADHD

    ERIC Educational Resources Information Center

    Mikami, Amori Yee; Pfiffner, Linda J.

    2008-01-01

    Objective: This study investigated the quality of sibling relationships among children with ADHD relative to those without ADHD. Additional analyses examined whether externalizing and internalizing problems comorbid with ADHD affected sibling relationships. Method: Participants were 77 children with ADHD and 14 nonproblem control children. Sibling…

  8. Multi-objective optimization of laser-scribed micro grooves on AZO conductive thin film using Data Envelopment Analysis

    NASA Astrophysics Data System (ADS)

    Kuo, Chung-Feng Jeffrey; Quang Vu, Huy; Gunawan, Dewantoro; Lan, Wei-Luen

    2012-09-01

    Laser scribing process has been considered as an effective approach for surface texturization on thin film solar cell. In this study, a systematic method for optimizing multi-objective process parameters of fiber laser system was proposed to achieve excellent quality characteristics, such as the minimum scribing line width, the flattest trough bottom, and the least processing edge surface bumps for increasing incident light absorption of thin film solar cell. First, the Taguchi method (TM) obtained useful statistical information through the orthogonal array with relatively fewer experiments. However, TM is only appropriate to optimize single-objective problems and has to rely on engineering judgment for solving multi-objective problems that can cause uncertainty to some degree. The back-propagation neural network (BPNN) and data envelopment analysis (DEA) were utilized to estimate the incomplete data and derive the optimal process parameters of laser scribing system. In addition, analysis of variance (ANOVA) method was also applied to identify the significant factors which have the greatest effects on the quality of scribing process; in other words, by putting more emphasis on these controllable and profound factors, the quality characteristics of the scribed thin film could be effectively enhanced. The experiments were carried out on ZnO:Al (AZO) transparent conductive thin film with a thickness of 500 nm and the results proved that the proposed approach yields better anticipated improvements than that of the TM which is only superior in improving one quality while sacrificing the other qualities. The results of confirmation experiments have showed the reliability of the proposed method.

  9. [Relationship between perceived emotional intelligence and professional quality of life with the achievement of occupational objectives in the costa del sol primary health care district].

    PubMed

    Macías Fernández, Antonio José; Gutiérrez-Castañeda, Carlos; Carmona González, Francisco Jesús; Crespillo Vílchez, Daniel

    2016-05-01

    To examine the relationship between "Quality of Professional Life" and "Perceived Emotional Intelligence" and the relationship of both of these with the level of achievement of occupational objectives in the Costa del Sol Primary Health Care District. Multicentre descriptive cross-sectional observational study. The Costa del Sol Primary Health Care District in the province of Málaga. Sample of Employees of all categories in fixed and contracted employment in the Management Units of the Costa del Sol District. (N=303). Respondents 247 (81.5%) The data collected was that of the percentage of achievement of objectives in 2010 and the socio-demographic data of the participants, using ad hoc designed self-report questionnaires. The TMMS -24 questionnaire was used to measure the "Perceived Emotional Intelligence", with the following dimensions: Perception, comprehension, and emotional control, and the CVP-35 measuring: management support, work demands, and intrinsic motivation. Significant correlationas were observed between Quality of Professional Life and Emotional Intelligence in the Regulation (p<.01) and Comprehension categories (p<0.05). There were also significant correlations between the profession and the type of contract in the achievement of objectives (p<.005), and quality of professional life and type of contract (p<.05). The perceived quality of professional life is related to perception and regulation dimensions of Emotional Intelligence. Knowledge of emotion management methods should be promoted by management organisations for all employees. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

  10. The effect of preoperative stoma site marking on quality of life

    PubMed Central

    Cakir, Selda Karaveli; Ozbayir, Turkan

    2018-01-01

    Objective: The objective of the study was to determine the effect of preoperative stoma site marking on the health- related quality of life (HRQOL). Methods: A nonrandomized, quasi-experimental design was used for the study performed from June 2013 to August 2014. The study sample (n:60) included patients for whom a stoma was opened after a planned colorectal surgery. The City of Hope Quality of Life-Ostomy Questionnaire (COHQOL-OQ) was used to measure HRQOL. Results: The mean age of the participants in the experimental group was 53.5±12.83, 18(60%) had colostomies, mean BMI was 25.46 ± 4.25 and mean age of that of the control group was 58.00 ± 14.22, 19(63.3%) had colostomies, mean BMI was 25.28 ± 5.00. A comparison of the two groups indicates that the sixth-month total score of the patients in the experimental group on (COHQOL-OQ) is higher than that of the control group (p<0.05). Conclusions: The study results demonstrated that patient who underwent stoma site marking reported higher HRQOL than those who did not. PMID:29643897

  11. Control of forward swept wing configurations dominated by flight-dynamic/aeroelastic interactions

    NASA Technical Reports Server (NTRS)

    Rimer, M.; Chipman, R.; Muniz, B.

    1984-01-01

    An active control system concept for an aeroelastic wind-tunnel model of a statically unstable FSW configuration with wing-mounted stores is developed to provide acceptable longitudinal flying qualities while maintaining adequate flutter speed margin. On FSW configurations, the inherent aeroelastic wing divergence tendency causes strong flight-dynamic/aeroelastic interactions that in certain cases can produce a dynamic instability known as body-freedom flutter (BFF). The carriage of wing-mounted stores is shown to severely aggravate this problem. The control system developed combines a canard-based SAS with an Active Divergence/Flutter Suppression (ADFS) system which relies on wing-mounted sensors and a trailing-edge device (flaperon). Synergism between these two systems is exploited to obtain the flying qualities and flutter speed objectives.

  12. Compromised quality of life in patients with both Type 1 diabetes mellitus and coeliac disease.

    PubMed

    Bakker, S F; Pouwer, F; Tushuizen, M E; Hoogma, R P; Mulder, C J; Simsek, S

    2013-07-01

    Type 1 diabetes mellitus and coeliac disease are two chronic illnesses associated with each other. Both diseases and their treatments can seriously impair quality of life. The objective of the present study was to investigate health-related quality of life in adult patients diagnosed with both Type 1 diabetes and coeliac disease and compare this with healthy control subjects and control subjects who have Type 1 diabetes only. A generic measure of health-related quality of life (RAND-36) and a measure of diabetes-specific quality of life (DQOL) questionnaires were sent to patients diagnosed with both Type 1 diabetes and coeliac disease. The control group consisted of patients with Type 1 diabetes without coeliac disease matched for age, gender and socio-economic status. Generic quality of life scores were compared with data from healthy Dutch control subjects. Fifty-seven patients with Type 1 diabetes and coeliac disease were included and no associations between clinical characteristics and quality of life were observed. Women reported a lower quality of life in social functioning, vitality and mental health than men (all P < 0.05). A lower diabetes-specific quality of life was observed regarding diabetes-related worries and social worries in patients with Type 1 diabetes and coeliac disease compared with patients with Type 1 diabetes. Compared with healthy control subjects, quality of life in patients with Type 1 diabetes and coeliac disease was significantly lower, particularly social functioning (Cohen's d = 0.76) and general health perception (Cohen's d = 0.86). The additional diagnosis of coeliac disease and treatment by gluten-free diet in adult patients with Type 1 diabetes has a considerable, negative impact on quality of life and diabetes-specific quality of life. Women are particularly affected and social functioning and general health perception is compromised. © 2013 The Authors. Diabetic Medicine © 2013 Diabetes UK.

  13. CONDUIT: A New Multidisciplinary Integration Environment for Flight Control Development

    NASA Technical Reports Server (NTRS)

    Tischler, Mark B.; Colbourne, Jason D.; Morel, Mark R.; Biezad, Daniel J.; Levine, William S.; Moldoveanu, Veronica

    1997-01-01

    A state-of-the-art computational facility for aircraft flight control design, evaluation, and integration called CONDUIT (Control Designer's Unified Interface) has been developed. This paper describes the CONDUIT tool and case study applications to complex rotary- and fixed-wing fly-by-wire flight control problems. Control system analysis and design optimization methods are presented, including definition of design specifications and system models within CONDUIT, and the multi-objective function optimization (CONSOL-OPTCAD) used to tune the selected design parameters. Design examples are based on flight test programs for which extensive data are available for validation. CONDUIT is used to analyze baseline control laws against pertinent military handling qualities and control system specifications. In both case studies, CONDUIT successfully exploits trade-offs between forward loop and feedback dynamics to significantly improve the expected handling, qualities and minimize the required actuator authority. The CONDUIT system provides a new environment for integrated control system analysis and design, and has potential for significantly reducing the time and cost of control system flight test optimization.

  14. QA/QC in the laboratory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hood, F.C.

    1992-05-01

    Quality assurance and quality control (QA/QC) of analytical chemistry laboratory activities are essential to the validity and usefulness of resultant data. However, in themselves, conventional QA/QC measures will not always ensure that fraudulent data are not generated. Conventional QA/QC measures are based on the assumption that work will be done in good faith; to assure against fraudulent practices, QA/QC measures must be tailored to specific analyses protocols in anticipation of intentional misapplication of those protocols. Application of specific QA/QC measures to ensure against fraudulent practices result in an increased administrative burden being placed on the analytical process; accordingly, in keepingmore » with graded QA philosophy, data quality objectives must be used to identify specific points of concern for special control to minimize the administrative impact.« less

  15. QA/QC in the laboratory. Session F

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hood, F.C.

    1992-05-01

    Quality assurance and quality control (QA/QC) of analytical chemistry laboratory activities are essential to the validity and usefulness of resultant data. However, in themselves, conventional QA/QC measures will not always ensure that fraudulent data are not generated. Conventional QA/QC measures are based on the assumption that work will be done in good faith; to assure against fraudulent practices, QA/QC measures must be tailored to specific analyses protocols in anticipation of intentional misapplication of those protocols. Application of specific QA/QC measures to ensure against fraudulent practices result in an increased administrative burden being placed on the analytical process; accordingly, in keepingmore » with graded QA philosophy, data quality objectives must be used to identify specific points of concern for special control to minimize the administrative impact.« less

  16. The Effects of Aromatherapy on Intensive Care Unit Patients' Stress and Sleep Quality: A Nonrandomised Controlled Trial

    PubMed Central

    Cho, Eun Hee; Lee, Mi-Young

    2017-01-01

    Background Stress has both physiological and psychological effects and can negatively impact patients' treatment and recovery. We examined whether the aromatherapy alleviated patients' stress and improved their sleep quality and provided data that can be utilized in clinical settings. Methods This was a nonrandomised controlled experimental study. Participants included lucid adult patients who were admitted to the intensive care unit and had spent more than two nights there. The experimental treatment required participants to engage in deep breathing with essential oils as part of the aromatherapy. The control group was instructed to go to sleep without receiving the lavender aroma oil. Results The experimental group and control group showed a significant difference in perceived stress (F = 60.11, p < .001), objective stress index (F = 25.65, p < .001), systolic blood pressure (F = 9.09, p < .001), diastolic blood pressure (F = 2.47, p = .046), heart rate (F = 5.71, p < .001), and sleep quality (F = 109.46, p < .001). Conclusions The results revealed that aromatherapy alleviated stress and improved sleep quality in intensive care unit patients after 2 days of the experimental treatment. These results demonstrate that aromatherapy affects stress and sleep quality, thus indicating its value in nursing interventions. This trial is registered with KCT0002344. PMID:29375641

  17. Effect of dynamic controlled atmosphere monitored by respiratory quotient and 1-methylcyclopropene on the metabolism and quality of 'Galaxy' apple harvested at three maturity stages.

    PubMed

    Thewes, Fabio Rodrigo; Brackmann, Auri; Anese, Rogerio de Oliveira; Ludwig, Vagner; Schultz, Erani Eliseu; Dos Santos, Luana Ferreira; Wendt, Lucas Mallmann

    2017-05-01

    The objective of this study was to evaluate the interaction between controlled atmosphere (CA), CA+1-methylcyclopropene (1-MCP) and dynamic controlled atmosphere monitored by respiratory quotient (DCA-RQ) with three fruit maturity stages at harvest (early harvest date, optimal harvest date and late harvest date) on 'Galaxy' apple metabolism and quality after harvest and 9months storage plus 7days of shelf life at 20°C. Fruit stored under dynamic controlled atmosphere monitored by respiratory quotient 1.3 (DCA-RQ 1.3) showed lower ethylene production, respiration rate, mealiness and higher flesh firmness in comparison to CA stored fruit, but did not differ from those treated with 1-MCP. The dynamic controlled atmosphere monitored by respiratory quotient 1.5 (DCA-RQ 1.5) increased the acetaldehyde, ethanol and ethyl acetate concentration, regardless of the fruit maturity at harvest. The storage of 'Galaxy' apple under DCA-RQ 1.3 is efficient in keeping quality regardless of the maturity stage at harvest. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. DATA QUALITY OBJECTIVES AND MEASUREMENT QUALITY OBJECTIVES FOR RESEARCH PROJECTS

    EPA Science Inventory

    The paper provides assistance with systematic planning using measurement quality objectives to those working on research projects. These performance criteria are more familiar to researchers than data quality objectives because they are more closely associated with the measuremen...

  19. Statistical process management: An essential element of quality improvement

    NASA Astrophysics Data System (ADS)

    Buckner, M. R.

    Successful quality improvement requires a balanced program involving the three elements that control quality: organization, people and technology. The focus of the SPC/SPM User's Group is to advance the technology component of Total Quality by networking within the Group and by providing an outreach within Westinghouse to foster the appropriate use of statistic techniques to achieve Total Quality. SPM encompasses the disciplines by which a process is measured against its intrinsic design capability, in the face of measurement noise and other obscuring variability. SPM tools facilitate decisions about the process that generated the data. SPM deals typically with manufacturing processes, but with some flexibility of definition and technique it accommodates many administrative processes as well. The techniques of SPM are those of Statistical Process Control, Statistical Quality Control, Measurement Control, and Experimental Design. In addition, techniques such as job and task analysis, and concurrent engineering are important elements of systematic planning and analysis that are needed early in the design process to ensure success. The SPC/SPM User's Group is endeavoring to achieve its objectives by sharing successes that have occurred within the member's own Westinghouse department as well as within other US and foreign industry. In addition, failures are reviewed to establish lessons learned in order to improve future applications. In broader terms, the Group is interested in making SPM the accepted way of doing business within Westinghouse.

  20. Psychosocial work characteristics and sleep quality: a systematic review of longitudinal and intervention research.

    PubMed

    Van Laethem, Michelle; Beckers, Debby G J; Kompier, Michiel A J; Dijksterhuis, Ap; Geurts, Sabine A E

    2013-11-01

    The objective of this study was to review longitudinal and intervention studies examining the association between psychosocial work characteristics (eg, job demands, job control, and social support) and sleep quality. Our main research aims were to examine whether (i) psychosocial work characteristics are a predictor of sleep quality, and (ii) sleep quality, in turn, is a predictor of psychosocial work characteristics. A systematic literature search resulted in 20 relevant papers, of which 16 were longitudinal studies and 3 were intervention studies (1 study was discussed in separate papers). To quantify results, we assessed the strength of evidence of all examined associations and subsequently evaluated the studies' research quality based on predefined quality criteria. One intervention and three longitudinal studies studies were categorized as being of high-quality. In longitudinal studies, we found consistent and strong evidence for a negative relation between job demands and sleep quality as well as evidence for a positive relation between job control and sleep quality. Other psychosocial work characteristics were examined in an insufficient number of (high-quality) studies. Moreover, both intervention studies as well as studies investigating reversed and reciprocal relations are rare, which further limits the possibility of drawing conclusions on causality. Based on the current literature, it can be concluded that high job demands and low job control are predictors of poor sleep quality. More high-quality research is needed to examine the possible causal relationship between these and other psychosocial work characteristics with sleep quality, in addition to research focusing on reversed and reciprocal relations.

  1. [Implementation of quality standard UNE-EN ISO/IEC 17043 in the External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology].

    PubMed

    Poveda Gabaldón, Marta; Ovies, María Rosario; Orta Mira, Nieves; Serrano, M del Remedio Guna; Avila, Javier; Giménez, Alicia; Cardona, Concepción Gimeno

    2011-12-01

    The quality standard "UNE-EN-ISO 17043: 2010. Conformity assessment. General requirements for proficiency testing" applies to centers that organize intercomparisons in all areas. In the case of clinical microbiology laboratories, these intercomparisons must meet the management and technical standards required to achieve maximum quality in the performance of microbiological analysis and the preparation of test items (sample, product, data or other information used in the proficiency test) to enable them to be accredited. Once accredited, these laboratories can operate as a tool for quality control laboratories and competency assessment. In Spain, accreditation is granted by the Spanish Accreditation Body [Entidad Nacional de Acreditación (ENAC)]. The objective of this review is to explain how to apply the requirements of the standard to laboratories providing intercomparisons in the field of clinical microbiology (the organization responsible for all the tasks related to the development and operation of a proficiency testing program). This requires defining the scope and specifying the technical requirements (personnel management, control of equipment, facilities and environment, the design of the proficiency testing and data analysis for performance evaluation, communication with participants and confidentiality) and management requirements (document control, purchasing control, monitoring of complaints / claims, non-compliance, internal audits and management reviews). Copyright © 2011 Elsevier España S.L. All rights reserved.

  2. Integrative Cardiac Health Project

    DTIC Science & Technology

    2011-09-01

    cholesterol when participants follow a strict vegetarian diet compared to controls that eat their normal diet . Vitamin B6 and Folate – Low levels of B...Persistence of lifestyle change behaviors in diet , exercise, and stress management 2. Coronary risk-factor control 3. Quality of Life Hypothesis... diet and exercise behaviors. (In preparation). Study Design and Objectives The purpose of this study is to determine whether knowledge of

  3. Management approach recommendations. Earth Observatory Satellite system definition study (EOS)

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Management analyses and tradeoffs were performed to determine the most cost effective management approach for the Earth Observatory Satellite (EOS) Phase C/D. The basic objectives of the management approach are identified. Some of the subjects considered are as follows: (1) contract startup phase, (2) project management control system, (3) configuration management, (4) quality control and reliability engineering requirements, and (5) the parts procurement program.

  4. Self-stigma and quality of life in patients with depressive disorder: a cross-sectional study.

    PubMed

    Holubova, Michaela; Prasko, Jan; Ociskova, Marie; Marackova, Marketa; Grambal, Ales; Slepecky, Milos

    2016-01-01

    Self-stigma is a maladaptive psychosocial phenomenon that can affect many areas of patients' lives and have a negative impact on their quality of life (QoL). This study explored the association between self-stigma, QoL, demographic data, and the severity of symptoms in patients with depressive disorder. Patients who met the International Classification of Diseases, 10th revision, research criteria for depressive disorder were enrolled in this cross-sectional study. All outpatients completed the following measurements: the Quality of Life Enjoyment and Satisfaction Questionnaire, the Internalized Stigma of Mental Illness Scale, demographic questionnaire, and the objective and subjective Clinical Global Impression-Severity scales that measure the severity of disorder. A total of 81 depressive disorder patients (with persistent affective disorder - dysthymia, major depressive disorder, or recurrent depressive disorder) and 43 healthy controls participated in this study. Compared with the healthy control group, a lower QoL was observed in patients with depressive disorder. The level of self-stigma correlated positively with total symptom severity score and negatively with QoL. Multiple regression analysis revealed that the overall rating of objective symptom severity and score of self-stigma were significantly associated with QoL. This study suggests a lower QoL in patients with depressive disorder in comparison with healthy controls and a negative impact of self-stigma level on QoL in patients suffering from depressive disorders.

  5. One fish, two fish, we QC fish: controlling data quality among more than 50 organizations over a four-year period.

    PubMed

    Riddick, L; Simbanin, C

    2001-01-01

    EPA is conducting a National Study of Chemical Residues in Lake Fish Tissue. The study involves five analytical laboratories, multiple sampling teams from each of the 47 participating states, several tribes, all 10 EPA Regions and several EPA program offices, with input from other federal agencies. To fulfill study objectives, state and tribal sampling teams are voluntarily collecting predator and bottom-dwelling fish from approximately 500 randomly selected lakes over a 4-year period. The fish will be analyzed for more than 300 pollutants. The long-term nature of the study, combined with the large number of participants, created several QA challenges: (1) controlling variability among sampling activities performed by different sampling teams from more than 50 organizations over a 4-year period; (2) controlling variability in lab processes over a 4-year period; (3) generating results that will meet the primary study objectives for use by OW statisticians; (4) generating results that will meet the undefined needs of more than 50 participating organizations; and (5) devising a system for evaluating and defining data quality and for reporting data quality assessments concurrently with the data to ensure that assessment efforts are streamlined and that assessments are consistent among organizations. This paper describes the QA program employed for the study and presents an interim assessment of the program's effectiveness.

  6. Automated batch characterization of inkjet-printed elastomer lenses using a LEGO platform.

    PubMed

    Sung, Yu-Lung; Garan, Jacob; Nguyen, Hoang; Hu, Zhenyu; Shih, Wei-Chuan

    2017-09-10

    Small, self-adhesive, inkjet-printed elastomer lenses have enabled smartphone cameras to image and resolve microscopic objects. However, the performance of different lenses within a batch is affected by hard-to-control environmental variables. We present a cost-effective platform to perform automated batch characterization of 300 lens units simultaneously for quality inspection. The system was designed and configured with LEGO bricks, 3D printed parts, and a digital camera. The scheme presented here may become the basis of a high-throughput, in-line inspection tool for quality control purposes and can also be employed for optimization of the manufacturing process.

  7. Water Quality Assessment for Deep-water Channel area of Guangzhou Port based on the Comprehensive Water Quality Identification Index Method

    NASA Astrophysics Data System (ADS)

    Chen, Yi

    2018-03-01

    The comprehensive water quality identification index method is able to assess the general water quality situation comprehensively and represent the water quality classification; water environment functional zone achieves pollution level and standard objectively and systematically. This paper selects 3 representative zones along deep-water channel of Guangzhou port and applies comprehensive water quality identification index method to calculate sea water quality monitoring data for different selected zones from year 2006 to 2014, in order to investigate the temporal variation of water quality along deep-water channel of Guangzhou port. The comprehensive water quality level from north to south presents an increased trend, and the water quality of the three zones in 2014 is much better than in 2006. This paper puts forward environmental protection measurements and suggestions for Pearl River Estuary, provides data support and theoretical basis for studied sea area pollution prevention and control.

  8. The internal audit of clinical areas: a pilot of the internal audit methodology in a health service emergency department.

    PubMed

    Brown, Alison; Santilli, Mario; Scott, Belinda

    2015-12-01

    Governing bodies of health services need assurance that major risks to achieving the health service objectives are being controlled. Currently, the main assurance mechanisms generated within the organization are through the review of implementation of policies and procedures and review of clinical audits and quality data. The governing bodies of health services need more robust, objective data to inform their understanding of the control of clinical risks. Internal audit provides a methodological framework that provides independent and objective assurance to the governing body on the control of significant risks. The article describes the pilot of the internal audit methodology in an emergency unit in a health service. An internal auditor was partnered with a clinical expert to assess the application of clinical criteria based on best practice guidelines. The pilot of the internal audit of a clinical area was successful in identifying significant clinical risks that required further management. The application of an internal audit methodology to a clinical area is a promising mechanism to gain robust assurance at the governance level regarding the management of significant clinical risks. This approach needs further exploration and trial in a range of health care settings. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

  9. How do memory and attention change with pregnancy and childbirth? A controlled longitudinal examination of neuropsychological functioning in pregnant and postpartum women.

    PubMed

    Logan, Dustin M; Hill, Kyle R; Jones, Rochelle; Holt-Lunstad, Julianne; Larson, Michael J

    2014-01-01

    Current literature on cognitive functioning in pregnancy and postpartum is mixed, with most research showing deficits in memory and attention during pregnancy or no difference between pregnant participants and controls with little emphasis on the postpartum period. In the current study, we used a longitudinal controlled design and 42 primarily not depressed participants to compare pregnant women in the third trimester and approximately three months postpartum with matched controls over the same time period on neuropsychological domains including memory, attention, learning, visuospatial, and executive functioning. We also evaluated the role of mood and quality of life as potential moderators of cognitive functioning in pregnancy/postpartum. Results indicated no differences between controls and pregnant/postpartum women on neuropsychological measures at any time points. Self-reported memory difficulties, however, were higher in the pregnant/postpartum women. Pregnant and postpartum women had worse self-reported mood and quality of life than controls. Mood and quality of life slightly moderated specific measures of attention and verbal fluency; however, neither mood nor quality of life moderated overall neuropsychological functioning in either group. Number of previous pregnancies had no effect on the study findings. Results suggest differences in subjective memory complaints, but no differences in objective neuropsychological test results between controls and pregnant/postpartum women who are primarily not diagnosed with depression.

  10. Express quality control of chicken eggs by machine vision

    NASA Astrophysics Data System (ADS)

    Gorbunova, Elena V.; Chertov, Aleksandr N.; Peretyagin, Vladimir S.; Korotaev, Valery V.; Arbuzova, Evgeniia A.

    2017-06-01

    The urgency of the task of analyzing the foodstuffs quality is determined by the strategy for the formation of a healthy lifestyle and the rational nutrition of the world population. This applies to products, such as chicken eggs. In particular, it is necessary to control the chicken eggs quality at the farm production prior to incubation in order to eliminate the possible hereditary diseases, as well as high embryonic mortality and a sharp decrease in the quality of the bred young. Up to this day, in the market there are no objective instruments of contactless express quality control as analytical equipment that allow the high-precision quality examination of the chicken eggs, which is determined by the color parameters of the eggshell (color uniformity) and yolk of eggs, and by the presence in the eggshell of various defects (cracks, growths, wrinkles, dirty). All mentioned features are usually evaluated only visually (subjectively) with the help of normalized color standards and ovoscopes. Therefore, this work is devoted to the investigation of the application opportunities of contactless express control method with the help of technical vision to implement the chicken eggs' quality analysis. As a result of the studies, a prototype with the appropriate software was proposed. Experimental studies of this equipment on a representative sample of eggs from chickens of different breeds have been carried out (the total number of analyzed samples exceeds 300 pieces). The correctness of the color analysis was verified by spectrophotometric studies of the surface of the eggshell.

  11. New quality-control materials for the determination of alkylphenols and alkylphenol ethoxylates in sewage sludge.

    PubMed

    Fernández-Sanjuan, María; Lacorte, Silvia; Rigol, Anna; Sahuquillo, Angels

    2012-11-01

    The determination of alkylphenols in sewage sludge is still hindered by the complexity of the matrix and of the analytes, some of which are a mixture of isomers. Most of the methods published in the literature have not been validated, due to the lack of reference materials for the determination of alkylphenols in sludge. Given this situation, the objectives of the present study were to develop a new quality-control material for determining octylphenol, nonylphenol and nonylphenol monoethoxylate in sludge. The material was prepared from an anaerobically digested sewage sludge, which was thermally dried, sieved, homogenized and bottled after checking for the bulk homogeneity of the processed material. Together with the sewage sludge, an extract was also prepared, in order to provide a quality-control material for allowing laboratories to test the measuring step. The homogeneity and 1-year stability of the two materials were evaluated. Statistical analysis proved that the materials were homogeneous and stable for at least 1 year stored at different temperatures. These materials are intended to assist in the quality control of the determination of alkylphenols and alkylphenol ethoxylates in sewage sludge.

  12. Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 10: PEP project plan

    NASA Technical Reports Server (NTRS)

    1979-01-01

    Contents: project plan summary; project and mission objectives; related studies and technology support activities; technical summary; management; procurement approach; project definition items and schedule; resources; management review; controlled items; and safety, reliability, and quality assurance.

  13. Highway Safety Data : costs, quality, and strategies for improvement : final report

    DOT National Transportation Integrated Search

    1978-05-01

    The objective of the experiment is to establish the influence of various types of trucks, buses and recreational vehicles on traffic flow on rural non-controlled access highways. This influence is due primarily to the low speeds which are common for ...

  14. METHYL BROMIDE ALTERNATIVES FOR VINEYARD REPLANT

    USDA-ARS?s Scientific Manuscript database

    Soil fumigation with methyl bromide is needed by grape growers in central California to control soilborne pests. However, use of methyl bromide is banned and soil fumigation with other chemicals subjects to strict regulations to protect human health and air quality. The objective was to determine,...

  15. NONDESTRUCTIVE QUALITY CONTROL: SOME SPECIAL METHODS OF IRRADIATION TESTING

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Van der Klis, T.

    1961-06-10

    S>Various methods, using open radioactive sources are discussed. In one method, oil is used containing Pd/sup 109/ which is adsorbed by Mg compounds with which the object to be tested is covered after it has been enveloped in a photographic film. Another method consists of coking the material in the radioactive oil and then scanning it with a suitable detector. A third method, applied especially to porous materials, uses pressure to promote the penetration of the radioactive oil into the cracks and fissures. The filtered particle technique is also used for detection of cracks or cavities in porous materials, suchmore » as ceramics, cement, graphite pressed powdered metals, and sintered carbides. In this method, radioactive liquids are used along with fluid fluorescent substances. Finally, a method is mentioned in which radioactive powder is made to adhere to the surface of the investigated objects by means of an electrostatic charge. This method is used for quality control of china, glass, email, and electric insulation material. (OID)« less

  16. Quality-of-life in patients with Dercum's disease--before and after liposuction.

    PubMed

    Hansson, Emma; Manjer, Jonas; Svensson, Henry; Brorson, Håkan

    2012-09-01

    Dercum's disease is characterised by obesity, pronounced pain in the adipose tissue, and a number of associated symptoms. Liposuction has been suggested as a treatment. However, the effect on quality-of-life after liposuction in Dercum's disease has never been investigated. The objective of this study was to examine the quality-of-life in Dercum's disease before and after liposuction. A total of 114 women fulfilling the clinical criteria of Dercum's disease were included. Of the 114 women, 53 were operated on with liposuction and 61 were Dercum controls. In addition, 41 obese healthy women operated on with abdominoplasty were recruited as controls. Health-related quality-of-life (HRQoL) was measured with the Nottingham Health Profile (NHP) and the Psychological General Well-Being index (PGWB). The Dercum group had lower HRQoL than the abdominoplasty controls. After liposuction, a slight improvement could be seen in HRQoL in the operated patients compared with preoperatively, but it did not become as high as in the abdominoplasty patients. In conclusion, the findings could suggest that liposuction improves the quality-of-life slightly in Dercum's disease. Nonetheless, the causality is unclear and the improvement is not big enough to warrant operation.

  17. Optimized Controller Design for a 12-Pulse Voltage Source Converter Based HVDC System

    NASA Astrophysics Data System (ADS)

    Agarwal, Ruchi; Singh, Sanjeev

    2017-12-01

    The paper proposes an optimized controller design scheme for power quality improvement in 12-pulse voltage source converter based high voltage direct current system. The proposed scheme is hybrid combination of golden section search and successive linear search method. The paper aims at reduction of current sensor and optimization of controller. The voltage and current controller parameters are selected for optimization due to its impact on power quality. The proposed algorithm for controller optimizes the objective function which is composed of current harmonic distortion, power factor, and DC voltage ripples. The detailed designs and modeling of the complete system are discussed and its simulation is carried out in MATLAB-Simulink environment. The obtained results are presented to demonstrate the effectiveness of the proposed scheme under different transient conditions such as load perturbation, non-linear load condition, voltage sag condition, and tapped load fault under one phase open condition at both points-of-common coupling.

  18. The effect of adaptive servo ventilation (ASV) on objective and subjective outcomes in Cheyne-Stokes respiration (CSR) with central sleep apnea (CSA) in heart failure (HF): A systematic review.

    PubMed

    Yang, Hyunju; Sawyer, Amy M

    2016-01-01

    To summarize the current evidence for adaptive servo ventilation (ASV) in Cheyne-Stokes respiration (CSR) with central sleep apnea (CSA) in heart failure (HF) and advance a research agenda and clinical considerations for ASV-treated CSR-CSA in HF. CSR-CSA in HF is associated with higher overall mortality, worse outcomes and lower quality of life (QOL) than HF without CSR-CSA. Five databases were searched using key words (n = 234). Randomized controlled trials assessed objective sleep quality, cardiac, and self-reported outcomes in adults (≥18 years) with HF (n = 10). ASV has a beneficial effect on the reduction of central sleep apnea in adult patients with CSR-CSA in HF, but it is not be superior to CPAP, bilevel PPV, or supplemental oxygen in terms of sleep quality defined by polysomnography, cardiovascular outcomes, subjective daytime sleepiness, and quality of life. ASV is not recommended for CSR-CSA in HF. It is important to continue to refer HF patients for sleep evaluation to clearly discern OSA from CSR-CSA. Symptom management research, inclusive of objective and subjective outcomes, in CSR-CSA in HF adults is needed. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. Physical activity, subjective sleep quality and time in bed do not vary by moon phase in German adolescents.

    PubMed

    Smith, Maia P; Standl, Marie; Schulz, Holger; Heinrich, Joachim

    2017-06-01

    Lunar periodicity in human biology and behaviour, particularly sleep, has been reported. However, estimated relationships vary in direction (more or less sleep with full moon) if they exist at all, and studies tend to be so small that there is potential for confounding by weekly or monthly cycles. Lunar variation in physical activity has been posited as a driver of this relationship, but is likewise not well studied. We explore the association between lunar cycle, sleep and physical activity in a population-based sample of 1411 Germans age 14-17 years (46% male). Physical activity (daily minutes moderate-to-vigorous activity) was objectively assessed by accelerometry for a total of 8832 days between 2011 and 2014. At the same time, time in bed (h) and subjective sleep quality (1-6) were diaried each morning. In models corrected for confounding, we found that lunar phase was not significantly associated with physical activity, subjective sleep quality or time in bed in either sex, regardless of season. Observed relationships varied randomly in direction between models, suggesting artefact. Thus, this large, objectively-measured and well-controlled population of adolescents displayed no lunar periodicity in objective physical activity, subjective sleep quality or time in bed. © 2016 European Sleep Research Society.

  20. Peering into peer review: Galileo, ESP, Dr Scott Reuben, and advancing our professional evolution.

    PubMed

    Biddle, Chuck

    2011-10-01

    The fundamental purpose of peer review is quality control that facilitates the introduction of information into our discipline; information that is essential to the care of patients who require anesthesia services. While the AANA Journal relies heavily on this process to maintain the overall quality of our scholarly literature, it may fail that objective under certain conditions. This editorial serves to inform readers of the nature and goals of the peer review process.

  1. Management by objectives and its impact on specialist prescription quality at discharge and in external consultations.

    PubMed

    Olmo, M; Galvan, L; Capdevila, J; Serna, C; Mangues, I; Schoenenberger, J A

    2011-01-01

    To verify that implementing a policy of management by objectives, based on collaboration between hospital pharmacy, primary care and specialised medical managers, improves prescription quality indicators in specialised care and reduces unwanted "induced" prescriptions (i.e. those issued by specialists, hospital doctors or the patients themselves) in primary care. A four year quasi-experimental controlled intervention study on prescription at discharge and in outpatient hospital consultations was conducted. In hospital A, a quality cycle was applied: assessment, identifying improvement opportunities, implementing corrective actions and re-assessment. However, it was not applied in control hospital B. The indicators chosen were the percentage of generic medicines prescribed, the percentage of prescriptions for new therapies with no added value and the percentage of prescriptions for ACE inhibitors recommended. In hospital A, an increase in indicators 1 and 3 has been observed, both being statistically significant, between the last year of intervention and the year previous to intervention. Hospital A managed to reduce indicator 2 to 4.5%, while this indicator increased in hospital B to 8.8%. Furthermore, a statistically significant difference in indicators between the two hospitals has been registered. Pay-for-Performance programs in prescription practices of hospital physicians are effective actions to improve quality indicators of medication use. Copyright © 2010 SEFH. Published by Elsevier Espana. All rights reserved.

  2. The Economics of Medicare Accountable Care Organizations

    PubMed Central

    Blackstone, Erwin A.; Fuhr, Joseph P.

    2016-01-01

    Background Accountable care organizations (ACOs) have been created to improve patient care, enhance population health, and reduce costs. Medicare in particular has focused on ACOs as a primary device to improve quality and reduce costs. Objective To examine whether the current Medicare ACOs are likely to be successful. Discussion Patients receiving care in ACOs have little incentive to use low-cost quality providers. Furthermore, the start-up costs of ACOs for providers are high, contributing to the minimal financial success of ACOs. We review issues such as reducing readmissions, palliative care, and the difficulty in coordinating care, which are major cost drivers. There are mixed incentives facing hospital-controlled ACOs, whereas physician-controlled ACOs could play hospitals against each other to obtain high quality and cost reductions. This discussion also considers whether the current structure of ACOs is likely to be successful. Conclusion The question remains whether Medicare ACOs can achieve the Triple Aim of “improving the experience of care, improving the health of populations, and reducing per capita costs of health care.” Care coordination in ACOs and information technology are proving more complicated and expensive to implement than anticipated. Even if ACOs can decrease healthcare costs and increase quality, it is unclear if the current incentives system can achieve these objectives. A better public policy may be to implement a system that encompasses the best practices of successful private integrated systems rather than promoting ACOs. PMID:27066191

  3. Likelihood of achieving air quality targets under model uncertainties.

    PubMed

    Digar, Antara; Cohan, Daniel S; Cox, Dennis D; Kim, Byeong-Uk; Boylan, James W

    2011-01-01

    Regulatory attainment demonstrations in the United States typically apply a bright-line test to predict whether a control strategy is sufficient to attain an air quality standard. Photochemical models are the best tools available to project future pollutant levels and are a critical part of regulatory attainment demonstrations. However, because photochemical models are uncertain and future meteorology is unknowable, future pollutant levels cannot be predicted perfectly and attainment cannot be guaranteed. This paper introduces a computationally efficient methodology for estimating the likelihood that an emission control strategy will achieve an air quality objective in light of uncertainties in photochemical model input parameters (e.g., uncertain emission and reaction rates, deposition velocities, and boundary conditions). The method incorporates Monte Carlo simulations of a reduced form model representing pollutant-precursor response under parametric uncertainty to probabilistically predict the improvement in air quality due to emission control. The method is applied to recent 8-h ozone attainment modeling for Atlanta, Georgia, to assess the likelihood that additional controls would achieve fixed (well-defined) or flexible (due to meteorological variability and uncertain emission trends) targets of air pollution reduction. The results show that in certain instances ranking of the predicted effectiveness of control strategies may differ between probabilistic and deterministic analyses.

  4. Robust feedback zoom tracking for digital video surveillance.

    PubMed

    Zou, Tengyue; Tang, Xiaoqi; Song, Bao; Wang, Jin; Chen, Jihong

    2012-01-01

    Zoom tracking is an important function in video surveillance, particularly in traffic management and security monitoring. It involves keeping an object of interest in focus during the zoom operation. Zoom tracking is typically achieved by moving the zoom and focus motors in lenses following the so-called "trace curve", which shows the in-focus motor positions versus the zoom motor positions for a specific object distance. The main task of a zoom tracking approach is to accurately estimate the trace curve for the specified object. Because a proportional integral derivative (PID) controller has historically been considered to be the best controller in the absence of knowledge of the underlying process and its high-quality performance in motor control, in this paper, we propose a novel feedback zoom tracking (FZT) approach based on the geometric trace curve estimation and PID feedback controller. The performance of this approach is compared with existing zoom tracking methods in digital video surveillance. The real-time implementation results obtained on an actual digital video platform indicate that the developed FZT approach not only solves the traditional one-to-many mapping problem without pre-training but also improves the robustness for tracking moving or switching objects which is the key challenge in video surveillance.

  5. Epidemiology and quality assurance: applications at farm level.

    PubMed

    Noordhuizen, J P; Frankena, K

    1999-03-29

    Animal production is relevant with respect to farm income and the position of the sector in the market, but also with respect to the quality and safety of products of animal origin, related to public health. Animal production is part of a chain of food production. Therefore, producers have to take consumer expectations and demands in the domains of animal health, welfare and environment into account. A different attitude for production has to be adopted; this attitude can be visualized in good farming practice, GFP, codes. Farmers who focused on quality in its broadest sense need a system supporting them in their management and control of quality risks. Generally speaking, there are three systems for that purpose: GFP, ISO and HACCP. When the hypothesis followed relates to animal health being a feature of quality, or else welfare and environmental issues, then animal health care can be executed following quality control principles. The HACCP concept is well suited for quality control at farm level, involving risk identification and risk management. The on-farm monitoring and surveillance system of critical control points in the animal production process is the most important tool in this procedure. Principles for HACCP application as well as certification fitness of HACCP are elaborated upon. They are illustrated by using salmonellosis in meat-pig farms as objective for an HACCP approach. It is further discussed that, in addition to animal health and quality, animal welfare and environmental issues could also be covered by an HACCP-like system in an integrated manner. Ultimately, the HACCP modules could end up in an overall ISO certification.

  6. Effectiveness of the Assessment of Burden of COPD (ABC) tool on health-related quality of life in patients with COPD: a cluster randomised controlled trial in primary and hospital care

    PubMed Central

    Slok, Annerika H M; Kotz, Daniel; van Breukelen, Gerard; Chavannes, Niels H; Rutten-van Mölken, Maureen P M H; Kerstjens, Huib A M; van der Molen, Thys; Asijee, Guus M; Dekhuijzen, P N Richard; Holverda, Sebastiaan; Salomé, Philippe L; Goossens, Lucas M A; Twellaar, Mascha; in ‘t Veen, Johannes C C M; van Schayck, Onno C P

    2016-01-01

    Objective Assessing the effectiveness of the Assessment of Burden of COPD (ABC) tool on disease-specific quality of life in patients with chronic obstructive pulmonary disease (COPD) measured with the St. George's Respiratory Questionnaire (SGRQ), compared with usual care. Methods A pragmatic cluster randomised controlled trial, in 39 Dutch primary care practices and 17 hospitals, with 357 patients with COPD (postbronchodilator FEV1/FVC ratio <0.7) aged ≥40 years, who could understand and read the Dutch language. Healthcare providers were randomly assigned to the intervention or control group. The intervention group applied the ABC tool, which consists of a short validated questionnaire assessing the experienced burden of COPD, objective COPD parameter (eg, lung function) and a treatment algorithm including a visual display and treatment advice. The control group provided usual care. Researchers were blinded to group allocation during analyses. Primary outcome was the number of patients with a clinically relevant improvement in SGRQ score between baseline and 18-month follow-up. Secondary outcomes were the COPD Assessment Test (CAT) and the Patient Assessment of Chronic Illness Care (PACIC; a measurement of perceived quality of care). Results At 18-month follow-up, 34% of the 146 patients from 27 healthcare providers in the intervention group showed a clinically relevant improvement in the SGRQ, compared with 22% of the 148 patients from 29 healthcare providers in the control group (OR 1.85, 95% CI 1.08 to 3.16). No difference was found on the CAT (−0.26 points (scores ranging from 0 to 40); 95% CI −1.52 to 0.99). The PACIC showed a higher improvement in the intervention group (0.32 points (scores ranging from 1 to 5); 95% CI 0.14 to 0.50). Conclusions This study showed that use of the ABC tool may increase quality of life and perceived quality of care. Trial registration number NTR3788; Results. PMID:27401361

  7. Comparison of methodological quality of positive versus negative comparative studies published in Indian medical journals: a systematic review

    PubMed Central

    Charan, Jaykaran; Chaudhari, Mayur; Jackson, Ryan; Mhaskar, Rahul; Reljic, Tea; Kumar, Ambuj

    2015-01-01

    Objectives Published negative studies should have the same rigour of methodological quality as studies with positive findings. However, the methodological quality of negative versus positive studies is not known. The objective was to assess the reported methodological quality of positive versus negative studies published in Indian medical journals. Design A systematic review (SR) was performed of all comparative studies published in Indian medical journals with a clinical science focus and impact factor >1 between 2011 and 2013. The methodological quality of randomised controlled trials (RCTs) was assessed using the Cochrane risk of bias tool, and the Newcastle-Ottawa scale for observational studies. The results were considered positive if the primary outcome was statistically significant and negative otherwise. When the primary outcome was not specified, we used data on the first outcome reported in the history followed by the results section. Differences in various methodological quality domains between positive versus negative studies were assessed by Fisher's exact test. Results Seven journals with 259 comparative studies were included in this SR. 24% (63/259) were RCTs, 24% (63/259) cohort studies, and 49% (128/259) case–control studies. 53% (137/259) of studies explicitly reported the primary outcome. Five studies did not report sufficient data to enable us to determine if results were positive or negative. Statistical significance was determined by p value in 78.3% (199/254), CI in 2.8% (7/254), both p value and CI in 11.8% (30/254), and only descriptive in 6.3% (16/254) of studies. The overall methodological quality was poor and no statistically significant differences between reporting of methodological quality were detected between studies with positive versus negative findings. Conclusions There was no difference in the reported methodological quality of positive versus negative studies. However, the uneven reporting of positive versus negative studies (72% vs 28%) indicates a publication bias in Indian medical journals with an impact factor of >1. PMID:26109118

  8. 48 CFR 2937.602 - Elements of performance-based contracting.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... objectively measurable incentives (e.g., Firm-Fixed-Price, Fixed-Price-Incentive-Fee, or Cost-Plus-Incentive-Fee) is appropriate. However, when contractor performance (e.g., cost control, schedule, or quality/technical) is best evaluated subjectively using qualitative measures, a Cost-Plus-Award-Fee contract may be...

  9. Physical, chemical and biological properties of simulated beef cattle bedded manure packs

    USDA-ARS?s Scientific Manuscript database

    Manure including bedding material can be a valuable fertilizer, yet numerous, poorly characterized, environmental factors control its quality. The objective was to determine whether moisture content (MC), nutrient value (ammonium nitrogen (NH4-N), total nitrogen (TN), total phosphorus (TP), total po...

  10. Objective Quality Control of Artillery Computer Meteorological Messages.

    DTIC Science & Technology

    1980-04-01

    Veazey , 1977, Proposed AMS-A for Corps TACFIRE (PACT) System Description, ASL Internal Report, White Sands Missile Range, NM 6 1nclosure 1, "Software...R. Veazey , 1977, Proposed AMS-A for Corps TACFIRE (PACT) System Description, ASL Internal Report, Atmospheric Sciences Laboratory, White Sands Missile

  11. Flight Dynamics and Controls Discipline Overview

    NASA Technical Reports Server (NTRS)

    Theodore, Colin R.

    2012-01-01

    This presentation will touch topics, including but not limited to, the objectives and challenges of flight dynamics and controls that deal with the pilot and the cockpit's technology, the flight dynamics and controls discipline tasks, and the full envelope of flight dynamics modeling. In addition, the LCTR 7x10-ft wind tunnel test will also be included along with the optimal trajectories for noise abatement and its investigations on handling quality. Furthermore, previous experiments and their complying results will also be discussed.

  12. Handling Qualities Implications for Crewed Spacecraft Operations

    NASA Technical Reports Server (NTRS)

    Bailey, Randall E.; Jackson, E. Bruce; Arthur, J. J.

    2012-01-01

    Abstract Handling qualities embody those qualities or characteristics of an aircraft that govern the ease and precision with which a pilot is able to perform the tasks required in support of an aircraft role. These same qualities are as critical, if not more so, in the operation of spacecraft. A research, development, test, and evaluation process was put into effect to identify, understand, and interpret the engineering and human factors principles which govern the pilot-vehicle dynamic system as they pertain to space exploration missions and tasks. Toward this objective, piloted simulations were conducted at the NASA Langley Research Center and Ames Research Center for earth-orbit proximity operations and docking and lunar landing. These works provide broad guidelines for the design of spacecraft to exhibit excellent handling characteristics. In particular, this work demonstrates how handling qualities include much more than just stability and control characteristics of a spacecraft or aircraft. Handling qualities are affected by all aspects of the pilot-vehicle dynamic system, including the motion, visual and aural cues of the vehicle response as the pilot performs the required operation or task. A holistic approach to spacecraft design, including the use of manual control, automatic control, and pilot intervention/supervision is described. The handling qualities implications of design decisions are demonstrated using these pilot-in-the-loop evaluations of docking operations and lunar landings.

  13. Manual therapy for tension-type headache related to quality of work life and work presenteeism: Secondary analysis of a randomized controlled trial.

    PubMed

    Monzani, Lucas; Espí-López, Gemma Victoria; Zurriaga, Rosario; Andersen, Lars L

    2016-04-01

    The objective of this research is to evaluate the efficacy of manual therapy for tension-type headache (TTH) in restoring workers quality of work life, and how work presenteeism affects this relation. This study is a secondary analysis of a factorial, randomized clinical trial on manual therapy interventions. Altogether, 80 patients (85% women) with TTH and without current symptoms of any other concomitant disease participated. An experienced therapist delivered the treatment: myofascial inhibitory technique (IT), articulatory technique (AT), combined technique (IT and AT), and control group (no treatment). In general, all treatments as compared to our control group had a large effect (f≥.69) in the improvement of participants' quality of work life. Work presenteeism interacted with TTH treatment type's efficacy on participant's quality of work life. The inhibitory technique lead to higher reports of quality of work life than other treatment options only for participants with very low frequency of work presenteeism. In turn, TTH articulatory treatment techniques resulted in higher reports of quality of work life for a high to very high work presenteeism frequency. Articulatory manipulation technique is the more efficient treatment to improve quality of work life when the frequency of work presenteeism is high. Implications for future research and practice are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Flight Test Results on the Stability and Control of the F-15 Quiet Spike(TradeMark) Aircraft

    NASA Technical Reports Server (NTRS)

    Moua, Cheng M.; McWherter, Shaun C.; Cox, Timothy H.; Gera, Joe

    2012-01-01

    The Quiet Spike F-15B flight research program investigated supersonic shock reduction using a 24-ft sub-scale telescoping nose boom on an F-15B airplane. The program primary flight test objective was to collect flight data for aerodynamic and structural models validation up to 1.8 Mach. Other objectives were to validate the mechanical feasibility of a morphing fuselage at the operational conditions and determine the near-field shock wave characterization. The stability and controls objectives were to assess the effect of the spike on the stability, controllability, and handling qualities of the aircraft and to ensure adequate stability margins across the entire research flight envelop. The two main stability and controls issues were the effects of the telescoping nose boom influenced aerodynamics on the F-15B aircraft flight dynamics and air data and angle of attack sensors. This paper reports on the stability and controls flight envelope clearance methods and flight test analysis of the F-15B Quiet Spike. Brief pilot commentary on typical piloting tasks, approach and landing, refueling task, and air data sensitivity to the flight control system are also discussed in this report.

  15. The effect of massage therapy on the quality of sleep in breast cancer patients.

    PubMed

    Kashani, Fahimeh; Kashani, Parisa

    2014-03-01

    Annually, about 6000 new cases are diagnosed with breast cancer in Iran. In Iran, more women are affected with breast cancer than a decade earlier in comparison with other countries, and 70% of them are diagnosed at an advanced phase. Insomnia is the most common disorder following breast cancer, and interference in sleep quality and rest causes changes in physiological functions and reduces the body's daily performance. The objective of this study was to determine the effect of massage therapy on the quality of sleep in patients with breast cancer. This clinical trial was conducted for about 1 month in a referral chemotherapy clinic of a teaching hospital in Isfahan, Iran. The participants consisted of 57 women with breast cancer who were selected by simple random sampling. They were randomly assigned to two groups of control and experimental. The control group was treated only by usual medical therapy, whereas the case group was treated by combined medical-massage therapy. Data collection tools were the validated Pittsburgh Sleep Quality Index and a demographic questionnaire. Data were analyzed by SPSS using descriptive statistics, Chi-square test, paired t-test, and Student's t-test. The results showed significant differences in the mean scores of quality of sleep before and after the intervention in the case group, while no significant differences were observed in the mean scores of quality of sleep before and after the intervention in the control group. In addition, no significant differences were observed in the mean scores of quality of sleep before the intervention between case and control groups. However, significant differences were observed in the mean scores of quality of sleep after the intervention between case and control groups. According to the results of this study, learning and applying massage techniques by medical staff causes health promotion and improves the quality of sleep in cancer patients. Furthermore, massage therapy is suggested as a non-pharmacologic method to improve sleep quality in these patients.

  16. SIMBAD quality-control

    NASA Technical Reports Server (NTRS)

    Lesteven, Soizick

    1992-01-01

    The astronomical database SIMBAD developed at the Centre de donnees astronomiques de Strasbourg presently contains 760,000 objects (stellar and non-stellar). It has the unique characteristic of being structured specifically for astronomical objects. All types of heterogeneous data (bibliographic references, measurements, and sets of identification) are connected with each object. The attributes that define quality of the database include the following. Reliability: cross-identification should not rely upon just exact values object coordinates. It also means that information attached to one simple object should be consistent. The existing data must be controlled in order to start with a reliable base and to cross-identify new data assuring the quality as data grows. Exhaustivity: delays between publication of new informations and their inclusion in the database should be as short as possible. The integrity of the database has to be maintained as data accumulates. Taking the amount of data into consideration and the rate of new data production, it is necessary to use automatic methods. One of the possibilities is to use multivariate data analysis. The factor-space is a n-dimensional relevancy space which is described by the n-axes representing a set of n subject matter headings; the words and phrases can be used to scale the axes and the documents are then a vector average of the terms within them. The application reported herein is based on the NASA-STI bibliographical database. The selected data concern astronomy, astrophysics, and space radiation (102,963 references from 1975 to 1991 included 8070 keywords). The F-space is built from this bibliographical data. By comparing the F-space position obtained from the NASA-STI keywords with the F-space position obtained from the SIMBAD references, the authors will be able to show whether it is possible to retrieve information with a restricted set of words only. If the comparison is valid, this will be a way to enter bibliographic information in the SIMBAD quality control process. Furthermore, it is possible to connect the physical measurements of stars from SIMBAD to literature concerning these stars from the NASA-STI abstracts. The physical properties of stars (e.g. UBV colors) are not randomly distributed. Stars are distributed among different clusters in a physical parameter space. The authors will show that there are some relations between this classification and the literature concerning these objects clusters in a factor space. They will investigate the nature of the relationship between the SIMBAD measurements and the bibliography. These would be new relationships that are not pre-established by an astronomer. In addition, the bibliography could be neutral information that can be used in combination with the measured parameters.

  17. Multidimensional vocal assessment after laser treatment for recurrent respiratory papillomatosis.

    PubMed

    Kono, Takeyuki; Yabe, Haruna; Uno, Kosuke; Saito, Koichiro; Ogawa, Kaoru

    2017-03-01

    Recurrent respiratory papillomatosis (RRP) is a benign epithelial tumor that exhibits a high frequency of recurrence. This study assesses the vocal function after laser treatment for RRP, particularly in relation to the frequency of surgery. Retrospective study. Thirty RRP patients who underwent laser surgery that controlled the tumor were included. Preoperative and postoperative Grade, Roughness, Breathiness, Asthenia, and Strain Scale, videostroboscopic findings, aerodynamic and acoustic parameters, and self-assessment questionnaires were measured and compared with an age- and sex-matched control group. Subsequently, to evaluate the association between postoperative voice quality and the number of surgeries, the patients were divided into three groups (group 1: single surgery, group 2: 2-5 surgeries, group3: >6 surgeries), and comparative multidimensional vocal assessments were performed. The mean number of surgeries was 3.4 (range, 1-8). Although all patients exhibited poorer vocal function than the control group preoperatively, they showed improvement in postoperative subjective and objective parameters. However, four patients who underwent one surgery with relatively aggressive ablation exhibited vocal cord scarring and deteriorated objective parameters. All remaining patients showed voice quality that was on par with the control group. Subgroup analysis proved no association between post-therapeutic voice quality and the patient characteristics, including preoperative staging and the number of surgical treatments performed. RRP patients can achieve a close to normal voice with high satisfaction even after recurrent surgical treatment when ablation of a subepithelial lesion using sufficient laser energy is adequate. 3b Laryngoscope, 127:679-684, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

  18. Functional properties of bicarbonates and lactic acid on chicken breast retail display properties and cooked meat quality.

    PubMed

    Lee, Nakia; Sharma, Vijendra; Brown, Nettie; Mohan, Anand

    2015-02-01

    Whole chicken breast was injected with potassium bicarbonate (PB), sodium bicarbonate (SB), and potassium lactate (K-lactate) and salt, alone or in combination at different concentration levels. The objectives were to 1) investigate the effects of different concentration of PB, SB, and PL on instrumental color, water-holding capacity (WHC), objective tenderness, expressible moisture, and moisture content and 2) evaluate whether sodium-containing ingredients can be replaced with potassium as a potential strategy to reduce total sodium content in the finished product. Results showed that chicken breast tissue marinated with SB and PB had greater moisture retention, display characteristics, and cooked product qualities than chicken breast tissue injected with water and the nonmarinated control. The L* values (lightness) did not change over the period of retail display and were not different compared to the control (P>0.05). The chicken breast enhanced with SB, PB, and K-lactate retained better retail display color than the controls (marinated with water and nonmarinated). Increasing the potassium bicarbonate concentration from 0.5 to 1.5% significantly improved the water-holding capacity (82.17 to 92.61%; P<0.05) and led to better cook yield (83.84 to 91.96%). Shear force values were lower at the 0.5% level for both SB and PB compared to the control. PB performed better on retail display and cooked meat quality than SB. This study suggests that chicken breast tissue can be marinated with KB as a healthier alternative to phosphate or SB. © 2015 Poultry Science Association Inc.

  19. Quality Assurance/Quality Control Jobs

    NASA Astrophysics Data System (ADS)

    Fanslau, Melody; Young, Janelle

    The production of a quality and safe food product is essential to the success of any food manufacturing facility. Because of this great importance, a career in quality can be extremely rewarding. Without happy customers willing to buy a product, a company would not be able to survive. Quality issues such as foreign objects, spoiled or mislabeled product, failure to meet net weight requirements, or a recall can all turn customers away from buying a product. The food industry is a customer-driven market in which some consumers are brand loyal based on a history of high quality or in which a single bad experience with a product will turn them away for a lifetime. With this said, the main role of a quality department is to help ensure that quality issues such as these are eliminated or kept to a minimum to maintain or increase the number of customers purchasing their product.

  20. Save medical personnel's time by improved user interfaces.

    PubMed

    Kindler, H

    1997-01-01

    Common objectives in the industrial countries are the improvement of quality of care, clinical effectiveness, and cost control. Cost control, in particular, has been addressed through the introduction of case mix systems for reimbursement by social-security institutions. More data is required to enable quality improvement, increases in clinical effectiveness and for juridical reasons. At first glance, this documentation effort is contradictory to cost reduction. However, integrated services for resource management based on better documentation should help to reduce costs. The clerical effort for documentation should be decreased by providing a co-operative working environment for healthcare professionals applying sophisticated human-computer interface technology. Additional services, e.g., automatic report generation, increase the efficiency of healthcare personnel. Modelling the medical work flow forms an essential prerequisite for integrated resource management services and for co-operative user interfaces. A user interface aware of the work flow provides intelligent assistance by offering the appropriate tools at the right moment. Nowadays there is a trend to client/server systems with relational databases or object-oriented databases as repository. The work flows used for controlling purposes and to steer the user interfaces must be represented in the repository.

  1. Sperm Quality during Storage Is Not Affected by the Presence of Antibiotics in EquiPlus Semen Extender but Is Improved by Single Layer Centrifugation

    PubMed Central

    Spergser, Joachim; Kuhl, Juliane; Schmidt, Kathrin; Johannisson, Anders

    2017-01-01

    Contamination of semen with bacteria arises during semen collection and handling. This bacterial contamination is typically controlled by adding antibiotics to semen extenders but intensive usage of antibiotics can lead to the development of bacterial resistance and may be detrimental to sperm quality. The objective of this study was to determine the effects of antibiotics in a semen extender on sperm quality and to investigate the effects of removal of bacteria by modified Single Layer Centrifugation (MSLC) through a colloid. Semen was collected from six adult pony stallions (three ejaculates per male). Aliquots of extended semen were used for MSLC with Equicoll, resulting in four treatment groups: control and MSLC in extender with antibiotics (CA and SA, respectively); control and MSLC in extender without antibiotics (CW and SW, respectively). Sperm motility, membrane integrity, mitochondrial membrane potential and chromatin integrity were evaluated daily by computer-assisted sperm analysis (CASA) and flow cytometry. There were no differences in sperm quality between CA and CW, or between SA and SW, although progressive motility was negatively correlated to total bacterial counts at 0 h. However, MSLC groups showed higher mean total motility (P < 0.001), progressive motility (P < 0.05), membrane integrity (P < 0.0001) and mitochondrial membrane potential (P < 0.05), as well as better chromatin integrity (P < 0.05), than controls. Sperm quality remained higher in the MSLC groups than controls throughout storage. These results indicate that sperm quality was not adversely affected by the presence of antibiotics but was improved considerably by MSLC. PMID:29267226

  2. Physician-Delivered Injection Therapies for Mechanical Neck Disorders: A Systematic Review Update (Non-Oral, Non-Intravenous Pharmacological Interventions for Neck Pain)

    PubMed Central

    Gross, Anita R.; Peloso, Paul M.; Galway, Erin; Navasero, Neenah; Essen, Karis Van; Graham, Nadine; Goldsmith, Charlie H; Gzeer, Wisam; Shi, Qiyun; Haines, Ted and COG

    2013-01-01

    Background: Controversy persists regarding medicinal injections for mechanical neck disorders (MNDs). Objectives: To determine the effectiveness of physician-delivered injections on pain, function/disability, quality of life, global perceived effect and patient satisfaction for adults with MNDs. Search Methods: We updated our previous searches of CENTRAL, MEDLINE and EMBASE from December 2006 through to March 2012. Selection Criteria: We included randomized controlled trials of adults with neck disorders treated by physician-delivered injection therapies. Data Collection and Analysis: Two authors independently selected articles, abstracted data and assessed methodological quality. When clinical heterogeneity was absent, we combined studies using random-effects models. Results: We included 12 trials (667 participants). No high or moderate quality studies were found with evidence of benefit over control. Moderate quality evidence suggests little or no difference in pain or function/disability between nerve block injection of steroid and bupivacaine vs bupivacaine alone at short, intermediate and long-term for chronic neck pain. We found limited very low quality evidence of an effect on pain with intramuscular lidocaine vs control for chronic myofascial neck pain. Two low quality studies showed an effect on pain with anaesthetic nerve block vs saline immediately post treatment and in the short-term. All other studies were of low or very low quality with no evidence of benefit over controls. Authors' Conclusions: Current evidence does not confirm the effectiveness of IM-lidocaine injection for chronic mechanical neck pain nor anaesthetic nerve block for cervicogenic headache. There is moderate evidence of no benefit for steroid blocks vs controls for mechanical neck pain. PMID:24155806

  3. [Application of microscopic spectroscopy in quality control of Niuhuang Qingxin pills].

    PubMed

    Nie, Li-Xing; Zhang, Ye; Zhang, Nan-Ping; Hu, Xiao-Ru; Kang, Shuai; Hou, Jian-Zhong; Dai, Zhong; Ma, Shuang-Cheng

    2016-10-01

    Application of microscopic spectroscopy in quality control of Niuhuang Qingxin pills was discussed. First, microscopic characteristics specified by the statutory standard of Niuhuang Qingxin pills were summarized. Then new identification method was established for Dioscoreae Rhizoma, Saigae Tataricae Cornu, Cinnamomi Cortex and Saposhnikoviae Radix. Finally, microscopic spectroscopy was used for test of Dioscoreae Rhizoma's adulterant Dioscoreae Fordii Rhizoma.It was the first time for this technology being applied in adulteration test of Chinese patent medicine.The results showed that Saigae Tataricae Cornu was not detected in 2 batches of Niuhuang Qingxin pills from 1 manufacturer while Dioscoreae Fordii Rhizoma was detected in 3 batches of samples from 2 manufacturers. The proposed methods were accurate, simple, rapid, objective and economic, which offered a more comprehensive approach for quality control of Niuhuang Qingxin pills. It was indicated that conventional technology such as microscopic spectroscopy could play an important role in identification of traditional Chinese medicine whose index ingredient was deficient or tiny. Copyright© by the Chinese Pharmaceutical Association.

  4. Research and Development Trend of Shape Control for Cold Rolling Strip

    NASA Astrophysics Data System (ADS)

    Wang, Dong-Cheng; Liu, Hong-Min; Liu, Jun

    2017-09-01

    Shape is an important quality index of cold rolling strip. Up to now, many problems in the shape control domain have not been solved satisfactorily, and a review on the research progress in the shape control domain can help to seek new breakthrough directions. In the past 10 years, researches and applications of shape control models, shape control means, shape detection technology, and shape control system have achieved significant progress. In the aspect of shape control models, the researches in the past improve the accuracy, speed and robustness of the models. The intelligentization of shape control models should be strengthened in the future. In the aspect of the shape control means, the researches in the past focus on the roll optimization, mill type selection, process optimization, local strip shape control, edge drop control, and so on. In the future, more attention should be paid to the coordination control of both strip shape and other quality indexes, and the refinement of control objective should be strengthened. In the aspects of shape detection technology and shape control system, some new types of shape detection meters and shape control systems are developed and have successfully industrial applications. In the future, the standardization of shape detection technology and shape control system should be promoted to solve the problem of compatibility. In general, the four expected development trends of shape control for cold rolling strip in the future are intelligentization, coordination, refinement, and standardization. The proposed research provides new breakthrough directions for improving shape quality.

  5. Display Systems Dynamics Requirements for Flying Qualities

    DTIC Science & Technology

    1988-05-09

    Schidtt. LodI Caser 13a. TYPE OP REPORT 1 &b TIME COVERED 14 DAEO EPOR Ywot.MDay)15. AGEWCUNT Finial Repart IFROM Oct.66o To DeB- 7lse may 9 178 16...e Di Spc Il .AI OF TABLE OF CONTENTS Section Page I INTRODUCTION 1 1 . Motivation and Objectives 1 2. Overview 3 3. Report Organization 4 II MODEL...BASED ANALYSIS FRAMEWORK 5 1 . Optimal Control Model Structure 5 2. OCM-Based Characterization of Flying Qualities 8 III MODELING THE PERCEPTUAL INTERFACE

  6. The singing power ratio as an objective measure of singing voice quality in untrained talented and nontalented singers.

    PubMed

    Watts, Christopher; Barnes-Burroughs, Kathryn; Estis, Julie; Blanton, Debra

    2006-03-01

    A growing body of contemporary research has investigated differences between trained and untrained singing voices. However, few studies have separated untrained singers into those who do and do not express abilities related to singing talent, including accurate pitch control and production of a pleasant timbre (voice quality). This investigation studied measures of the singing power ratio (SPR), which is a quantitative measure of the resonant quality of the singing voice. SPR reflects the amplification or suppression in the vocal tract of the harmonics produced by the sound source. This measure was acquired from the voices of untrained talented and nontalented singers as a means to objectively investigate voice quality differences. Measures of SPR were acquired from vocal samples with fast Fourier transform (FFT) power spectra to analyze the amplitude level of the partials in the acoustic spectrum. Long-term average spectra (LTAS) were also analyzed. Results indicated significant differences in SPR between groups, which suggest that vocal tract resonance, and its effect on perceived vocal timbre or quality, may be an important variable related to the perception of singing talent. LTAS confirmed group differences in the tuning of vocal tract harmonics.

  7. Nightmares affect the experience of sleep quality but not sleep architecture: an ambulatory polysomnographic study.

    PubMed

    Paul, Franc; Schredl, Michael; Alpers, Georg W

    2015-01-01

    Nightmares and bad dreams are common in people with emotional disturbances. For example, nightmares are a core symptom in posttraumatic stress disorder and about 50% of borderline personality disorder patients suffer from frequent nightmares. Independent of mental disorders, nightmares are often associated with sleep problems such as prolonged sleep latencies, poorer sleep quality, and daytime sleepiness. It has not been well documented whether this is reflected in objectively quantifiable physiological indices of sleep quality. Questionnaires regarding subjective sleep quality and ambulatory polysomnographic recordings of objective sleep parameters were collected during three consecutive nights in 17 individuals with frequent nightmares (NM) and 17 healthy control participants (HC). NM participants reported worse sleep quality, more waking problems and more severe insomnia compared to HC group. However, sleep measures obtained by ambulatory polysomnographic recordings revealed no group differences in (a) overall sleep architecture, (b) sleep cycle duration as well as REM density and REM duration in each cycle and (c) sleep architecture when only nights with nightmares were analyzed. Our findings support the observation that nightmares result in significant impairment which is independent from disturbed sleep architecture. Thus, these specific problems require specific attention and appropriate treatment.

  8. Image quality testing of assembled IR camera modules

    NASA Astrophysics Data System (ADS)

    Winters, Daniel; Erichsen, Patrik

    2013-10-01

    Infrared (IR) camera modules for the LWIR (8-12_m) that combine IR imaging optics with microbolometer focal plane array (FPA) sensors with readout electronics are becoming more and more a mass market product. At the same time, steady improvements in sensor resolution in the higher priced markets raise the requirement for imaging performance of objectives and the proper alignment between objective and FPA. This puts pressure on camera manufacturers and system integrators to assess the image quality of finished camera modules in a cost-efficient and automated way for quality control or during end-of-line testing. In this paper we present recent development work done in the field of image quality testing of IR camera modules. This technology provides a wealth of additional information in contrast to the more traditional test methods like minimum resolvable temperature difference (MRTD) which give only a subjective overall test result. Parameters that can be measured are image quality via the modulation transfer function (MTF) for broadband or with various bandpass filters on- and off-axis and optical parameters like e.g. effective focal length (EFL) and distortion. If the camera module allows for refocusing the optics, additional parameters like best focus plane, image plane tilt, auto-focus quality, chief ray angle etc. can be characterized. Additionally, the homogeneity and response of the sensor with the optics can be characterized in order to calculate the appropriate tables for non-uniformity correction (NUC). The technology can also be used to control active alignment methods during mechanical assembly of optics to high resolution sensors. Other important points that are discussed are the flexibility of the technology to test IR modules with different form factors, electrical interfaces and last but not least the suitability for fully automated measurements in mass production.

  9. Sleep Quantity and Quality during Acute Concussion: A Pilot Study

    PubMed Central

    Raikes, Adam C.; Schaefer, Sydney Y.

    2016-01-01

    Study Objectives: A number of subjective and objective studies provide compelling evidence of chronic post-concussion changes in sleep, yet very little is known about the acute effects of concussion on sleep quality and quantity. Therefore, the purpose of this prospective pilot study was to use actigraphy to examine the changes in sleep quality and quantity acutely following concussion at home rather than in a hospital or sleep laboratory. Methods: Seventeen young adults (7 with acute concussion, 10 controls) were recruited for this study. All participants completed two 5-day testing sessions separated by 30 days from intake (controls) or day of injury (concussion). Participants wore actigraphs and kept a sleep journal. Sleep parameter outcomes included nighttime total sleep time (nTST), 24-h total sleep time (TST), wake after sleep onset (WASO), and sleep efficiency (SE). The coefficient of variation (CV) for each sleep parameter was computed for each session. Results: nTST and TST CV was significantly greater in the concussion group. There is the additional indication that individuals with a concussion may require and obtain more sleep shortly after injury and subsequently have a shorter duration of sleep at 1 mo post-injury. This pattern was not seen in the measures of sleep quality (WASO, SE). Conclusions: Individuals with a concussion demonstrated increased nighttime sleep duration variability. This increase persisted at 1 mo post-injury and may be associated with previously documented self-reports of poor sleep quality lasting months and years after a concussion. Additionally, this increase may predispose individuals to numerous negative health outcomes if left untreated. Citation: Raikes AC, Schaefer SY. Sleep quantity and quality during acute concussion: a pilot study. SLEEP 2016;39(12):2141–2147. PMID:27748242

  10. Depressive Symptoms are the Main Predictor for Subjective Sleep Quality in Patients with Mild Cognitive Impairment—A Controlled Study

    PubMed Central

    Seidel, Stefan; Dal-Bianco, Peter; Pablik, Eleonore; Müller, Nina; Schadenhofer, Claudia; Lamm, Claus; Klösch, Gerhard; Moser, Doris; Klug, Stefanie; Pusswald, Gisela; Auff, Eduard; Lehrner, Johann

    2015-01-01

    Objective Controlled data on predictors of subjective sleep quality in patients with memory complaints are sparse. To improve the amount of comprehensive data on this topic, we assessed factors associated with subjective sleep quality in patients from our memory clinic and healthy individuals. Methods Between February 2012 and August 2014 patients with mild cognitive impairment (MCI) and subjective cognitive decline (SCD) from our memory clinic and healthy controls were recruited. Apart from a detailed neuropsychological assessment, the subjective sleep quality, daytime sleepiness and depressive symptoms were assessed using the Pittsburgh Sleep Quality Index (PSQI), the Epworth Sleepiness Scale (ESS) and the Beck Depression Inventory (BDI-II). Results One hundred fifty eight consecutive patients (132 (84%) MCI patients and 26 (16%) SCD patients) and 75 healthy controls were included in the study. Pairwise comparison of PSQI scores showed that non-amnestic MCI (naMCI) patients (5.4±3.5) had significantly higher PSQI scores than controls (4.3±2.8, p = .003) Pairwise comparison of PSQI subscores showed that naMCI patients (1.1±0.4) had significantly more “sleep disturbances” than controls (0.9±0.5, p=.003). Amnestic MCI (aMCI) (0.8±1.2, p = .006) and naMCI patients (0.7±1.2, p = .002) used “sleep medication” significantly more often than controls (0.1±0.6) Both, aMCI (11.5±8.6, p<.001) and naMCI (11.5±8.6, p<.001) patients showed significantly higher BDI-II scores than healthy controls (6.1±5.3). Linear regression analysis showed that the subjective sleep quality was predicted by depressive symptoms in aMCI (p<.0001) and naMCI (p<.0001) patients as well as controls (p<.0001). This means, that more depressive symptoms worsened subjective sleep quality. In aMCI patients we also found a significant interaction between depressive symptoms and global cognitive function (p = .002) Discussion Depressive symptoms were the main predictor of subjective sleep quality in MCI patients and controls, but not in SCD patients. Better global cognitive function ameliorated the negative effect of depressive symptoms on the subjective sleep quality in aMCI patients. PMID:26090659

  11. Inheritance of and molecular markers for purple seed stain resistance in soybean

    USDA-ARS?s Scientific Manuscript database

    Purple seed stain (PSS) caused by Cercospora kikuchii, is an important disease of soybean, causing seed quality deterioration. Use of genetic resistance is the most practical and economical way to control the disease. The objectives of this research were to investigate the inheritance of resistance...

  12. Effectiveness and costs of overland skid trail BMPs

    Treesearch

    Clay Sawyers; W. Michael Aust; M. Chad Bolding; William A. Lakel III

    2012-01-01

    Forestry Best Management Practices (BMPs) are designed to protect water quality; however, little data exists comparing the efficacy and costs of different BMP options for skid trail closure. Study objectives were to evaluate erosion control effectiveness and implementation costs of five overland skid trail closure techniques. Closure techniques were: waterbar only (...

  13. Patient Suitability and Outcome in Short-Term Individual Psychotherapy.

    ERIC Educational Resources Information Center

    Piper, William E.; And Others

    1990-01-01

    Studied effects of short-term, dynamically oriented individual therapy and patient characteristic quality of object relations (QOR) in study involving 8 therapists and 144 psychiatric outpatients. Best results were attained by high QOR therapy patients; worst results were attained by low QOR control patients. Results were suggestive of optimal…

  14. Integrating watershed- and farm-scale modeling framework for targeting critical source areas while maintaining farm economic viability

    USDA-ARS?s Scientific Manuscript database

    Quantitative risk assessments of pollution and data related to the effectiveness of mitigating best management practices (BMPs) are important aspects of nonpoint source (NPS) pollution control efforts, particularly those driven by specific water quality objectives and by measurable improvement goals...

  15. Problem-Solving Therapy for Depression in Adults: A Systematic Review

    ERIC Educational Resources Information Center

    Gellis, Zvi D.; Kenaley, Bonnie

    2008-01-01

    Objectives: This article presents a systematic review of the evidence on problem-solving therapy (PST) for depressive disorders in noninstitutionalized adults. Method: Intervention studies using randomized controlled designs are included and methodological quality is assessed using a standard set of criteria from the Cochrane Collaborative Review…

  16. Applications of Fourier transform infrared spectroscopy to quality control of the epoxy matrix

    NASA Technical Reports Server (NTRS)

    Antoon, M. K.; Starkey, K. M.; Koenig, J. L.

    1979-01-01

    The object of the paper is to demonstrate the utility of Fourier transform infrared (FT-IR) difference spectra for investigating the composition of a neat epoxy resin, hardener, and catalysts. The composition and degree of cross-linking of the cured matrix is also considered.

  17. Phosphorus retention by fly-ash amended filter media in aged bioretention cells

    USDA-ARS?s Scientific Manuscript database

    Bioretention cells (BRCs) have shown potential for stormwater quantity and quality control. However, the phosphorus (P) removal in BRC has been variable due to differences of soil properties in filter media. The objectives of this research were to identify and evaluate P accumulation in filter media...

  18. Assessment of in situ test technology for construction control of base courses and embankments.

    DOT National Transportation Integrated Search

    2008-04-01

    The main objective of this research is to assess the use of three nondestructive testing devices, the GeoGauge, the LFWD, and the DCP, in order to evaluate the in situ elastic modulus of highway materials for application in the quality assurance/qual...

  19. Affiliation and Control During Marital Disagreement, History of Divorce, and Asymptomatic Coronary Artery Calcification in Older Couples

    PubMed Central

    Smith, Timothy W.; Uchino, Bert N.; Florsheim, Paul; Berg, Cynthia A.; Butner, Jonathan; Hawkins, Melissa; Henry, Nancy J. M.; Beveridge, Ryan M.; Pearce, Gale; Hopkins, Paul N.; Yoon, Hyo-Chun

    2011-01-01

    Objective Marital disruption and low marital quality confer risk of coronary artery disease (CAD) in some but not all studies. Inconsistencies might reflect limitations of self-reports of marital quality compared to behavioral observations. Also, aspects of marital quality related to CAD might differ for men and women. This study examined behavioral observations of affiliation (i.e., warmth vs. hostility) and control (i.e., dominance vs. submissiveness) and prior divorce as predictors of coronary artery calcification (CAC) in older couples. Methods Couples underwent CT scans for CAC and marital assessments including observations of laboratory-based disagreement. Participants were 154 couples (mean age = 63.5; mean length of marriage = 36.4 years) free of prio diagnosis of CAD. Results Controlling traditional risk factors, behavioral measures of affiliation (low warmth) accounted for 6.2% of variance in CAC for women, p<.01, but not for men. Controlling behavior (dominance) accounted for 6.0% of variance in CAC for men, p<.02, but not for women. Behavioral measures were related to self-reports of marital quality, but the latter were unrelated to CAC. History of divorce predicted CAC for men and women. Conclusions History of divorce and behavioral – but not self-report – measures of marital quality were related to CAD, such that low warmth and high dominance conferred risk for women and men, respectively. Prior research might underestimate the role of marital quality in CAD by relying on global self-reports of this risk factor. PMID:21364198

  20. The Effects of Poor Sleep Quality on Cognitive Function of Patients with Cirrhosis

    PubMed Central

    Stewart, Charmaine A.; Auger, Robert; Enders, Felicity T. B.; Felmlee-Devine, Donna; Smith, Glenn E.

    2014-01-01

    Objectives: This study was conducted to assess the ill-defined relationship between sleep quality and multiple, specific domains of cognitive function in patients with cirrhosis. Methods: A comprehensive battery of neuropsychological tests (divided into six neurocognitive domains) and a standardized, validated measure of sleep quality (Pittsburgh Sleep Quality Index [PSQI]) were administered to patients with cirrhosis and without evidence of overt hepatic encephalopathy, recruited from liver transplant and advanced liver disease clinics (n = 34). An inflammatory bowel disease (IBD) control group (n = 23) was similarly recruited and evaluated to control for the secondary effect of a chronic illness on cognition. PSQI global and component scores were used to predict cognitive function in each neurocognitive domain, using linear regression Results: Global PSQI scores were significantly higher (indicating poorer sleep quality) in the cirrhosis group (median [range] = 10 [1-19]) than in IBD controls = 5 (1-14); p = 0.002). After controlling for age and education, short duration of sleep was associated with impaired memory for patients with cirrhosis; the use of soporific agents was associated with poor visual-perceptual function in patients with IBD. Conclusions: Poor sleep was associated with worsening of the already impaired cognitive function of patients with cirrhosis. Citation: Stewart CA; Auger R; Enders FTB; Felmlee-Devine D; Smith GE. The effects of poor sleep quality on cognitive function of patients with cirrhosis. J Clin Sleep Med 2014;10(1):21-26. PMID:24426816

  1. The application of immune genetic algorithm in main steam temperature of PID control of BP network

    NASA Astrophysics Data System (ADS)

    Li, Han; Zhen-yu, Zhang

    In order to overcome the uncertainties, large delay, large inertia and nonlinear property of the main steam temperature controlled object in the power plant, a neural network intelligent PID control system based on immune genetic algorithm and BP neural network is designed. Using the immune genetic algorithm global search optimization ability and good convergence, optimize the weights of the neural network, meanwhile adjusting PID parameters using BP network. The simulation result shows that the system is superior to conventional PID control system in the control of quality and robustness.

  2. Music psychopathology. V. Objective features of instrumental performance and psychopathology.

    PubMed

    Steinberg, R; Fani, M; Raith, L

    1992-01-01

    Mental disease systematically impairs musical expression according to nosologic classification. This was demonstrated with a polarity profile of the instrumental performances of 60 inpatients and 14 controls matched for musical aptitude. Objective performance characteristics such as irregularities and playing faults were analyzed too. No meaningful correlation between these features and psychopathology resulted. This indicates that even in severe psychopathologic alterations performance features, which depend mainly on education and actual training, are not altered in a systematic manner, in contrast to expressive qualities.

  3. Liver phantom for quality control and training in nuclear medicine

    NASA Astrophysics Data System (ADS)

    Lima Ferreira, Fernanda Carla; Souza, Divanizia do Nascimento

    2011-10-01

    In nuclear medicine, liver scintigraphy aims to verify organ function based on the radionuclide concentration in the liver and bile flow and is also used to detect tumors. Therefore it is necessary to perform quality control tests in the gamma camera before running the exam to prevent false results. Quality control tests of the gamma camera should thus be performed before running the exam to prevent false results. Such tests generally use radioactive material inside phantoms for evaluation of gamma camera parameters in quality control procedures. Phantoms can also be useful for training doctors and technicians in nuclear medicine procedures. The phantom proposed here has artifacts that simulate nodules; it may take on different quantities, locations and sizes and it may also be mounted without the introduction of nodules. Thus, its images may show hot or cold nodules or no nodules. The phantom consists of acrylic plates hollowed out in the centre, with the geometry of an adult liver. Images for analyses of simulated liver scintigraphy were obtained with the detector device at 5 cm from the anterior surface of the phantom. These simulations showed that this object is suitable for quality control in nuclear medicine because it was possible to visualize artifacts larger than 7.9 mm using a 256×256 matrix and 1000 kcpm. The phantom constructed in this work will also be useful for training practitioners and technicians in order to prevent patients from repeat testing caused by error during examinations.

  4. Improving Quality of Care in Primary Health-Care Facilities in Rural Nigeria

    PubMed Central

    Ugo, Okoli; Ezinne, Eze-Ajoku; Modupe, Oludipe; Nicole, Spieker; Kelechi, Ohiri

    2016-01-01

    Background: Nigeria has a high population density but a weak health-care system. To improve the quality of care, 3 organizations carried out a quality improvement pilot intervention at the primary health-care level in selected rural areas. Objective: To assess the change in quality of care in primary health-care facilities in rural Nigeria following the provision of technical governance support and to document the successes and challenges encountered. Method: A total of 6 states were selected across the 6 geopolitical zones of the country. However, assessments were carried out in 40 facilities in only 5 states. Selection was based on location, coverage, and minimum services offered. The facilities were divided randomly into 2 groups. The treatment group received quality-of-care assessment, continuous feedback, and improvement support, whereas the control group received quality assessment and no other support. Data were collected using the SafeCare Healthcare Standards and managed on the SafeCare Data Management System—AfriDB. Eight core areas were assessed at baseline and end line, and compliance to quality health-care standards was compared. Result: Outcomes from 40 facilities were accepted and analyzed. Overall scores increased in the treatment facilities compared to the control facilities, with strong evidence of improvement (t = 5.28, P = .0004) and 11% average improvement, but no clear pattern of improvement emerged in the control group. Conclusion: The study demonstrated governance support and active community involvement offered potential for quality improvement in primary health-care facilities. PMID:28462280

  5. Comparison of wheat- versus corn-based dried distillers' grains with solubles on meat quality of feedlot cattle.

    PubMed

    Aldai, N; Aalhus, J L; Dugan, M E R; Robertson, W M; McAllister, T A; Walter, L J; McKinnon, J J

    2010-03-01

    A considerable amount of information has been generated on the feeding value and impact of corn dried distillers' grains with solubles (DDGS) on meat quality, whereas little is known about the effects of wheat DDGS on meat quality, and no direct comparison of these two sources of DDGS has been completed. The current study was conducted to examine the objective and subjective carcass and meat quality traits of cattle fed diets containing corn or wheat (20% or 40%) DDGS (DM basis) as compared to a standard barley-based finishing diet (control). In general, meat obtained from animals fed the barley-based control diet was slightly darker in colour (lower chroma and hue at 24 h, P<0.01) and less tender (highest proportion of tough shears at 2 d and lowest proportion of tender shears at 20 d). Meat from corn DDGS was rated as more tender and palatable than control samples (P<0.05), and 20% corn samples were rated better for beef flavour intensity (P<0.01) and desirability (P<0.05) than 40% corn DDGS samples. In contrast, meat from steers fed wheat DDGS showed intermediate characteristics between steers fed control and corn DDGS diets. Hence, feeding wheat DDGS had no negative effects, and feeding corn DDGS had some positive effects on meat quality characteristics of beef. Crown Copyright 2009. Published by Elsevier Ltd. All rights reserved.

  6. Quality of Care for Patients with Type 2 Diabetes Mellitus in Dubai: A HEDIS-Like Assessment

    PubMed Central

    Szabo, Shelagh M.; Osenenko, Katherine M.; Qatami, Lara; Korenblat Donato, Bonnie M.; Korol, Ellen E.; Al Madani, Abdulrazzaq A.; Al Awadi, Fatheya F.; Al-Ansari, Jaber; Maclean, Ross; Levy, Adrian R.

    2015-01-01

    Objective. As little data are available on the quality of type 2 diabetes mellitus (T2DM) care in the Arabian Gulf States, we estimated the proportion of patients receiving recommended monitoring at the Dubai Hospital for T2DM over one year. Methods. Charts from 150 adults with T2DM were systematically sampled and quality of care was assessed during one calendar year, using a Healthcare Effectiveness Data and Information Set- (HEDIS-) like assessment. Screening for glycosylated haemoglobin (HbA1c), low-density lipoprotein (LDL), blood pressure, retinopathy, and nephropathy was considered. Patients were classified based on their most recent test in the period, and predictors of receiving quality care were examined. Results. Mean age was 58 years (standard deviation (SD): 12.4 years) and 33% were males. Over the year, 98% underwent HbA1c screening (50% had control and 28% displayed poor control); 91% underwent LDL screening (65% had control); 55% had blood pressure control; 30% had retinopathy screening; and 22% received attention for nephropathy. No individual characteristics examined predicted receiving quality care. Conclusion. Some guideline monitoring was conducted for most patients; and rates of monitoring for selected measures were comparable to benchmarks from the United States. Greater understanding of factors leading to high adherence would be useful for other areas of preventive care and other jurisdictions. PMID:26089885

  7. Quality of Care for Patients with Type 2 Diabetes Mellitus in Dubai: A HEDIS-Like Assessment.

    PubMed

    Szabo, Shelagh M; Osenenko, Katherine M; Qatami, Lara; Korenblat Donato, Bonnie M; Korol, Ellen E; Al Madani, Abdulrazzaq A; Al Awadi, Fatheya F; Al-Ansari, Jaber; Maclean, Ross; Levy, Adrian R

    2015-01-01

    Objective. As little data are available on the quality of type 2 diabetes mellitus (T2DM) care in the Arabian Gulf States, we estimated the proportion of patients receiving recommended monitoring at the Dubai Hospital for T2DM over one year. Methods. Charts from 150 adults with T2DM were systematically sampled and quality of care was assessed during one calendar year, using a Healthcare Effectiveness Data and Information Set- (HEDIS-) like assessment. Screening for glycosylated haemoglobin (HbA1c), low-density lipoprotein (LDL), blood pressure, retinopathy, and nephropathy was considered. Patients were classified based on their most recent test in the period, and predictors of receiving quality care were examined. Results. Mean age was 58 years (standard deviation (SD): 12.4 years) and 33% were males. Over the year, 98% underwent HbA1c screening (50% had control and 28% displayed poor control); 91% underwent LDL screening (65% had control); 55% had blood pressure control; 30% had retinopathy screening; and 22% received attention for nephropathy. No individual characteristics examined predicted receiving quality care. Conclusion. Some guideline monitoring was conducted for most patients; and rates of monitoring for selected measures were comparable to benchmarks from the United States. Greater understanding of factors leading to high adherence would be useful for other areas of preventive care and other jurisdictions.

  8. Evidence-based dentistry: a model for clinical practice.

    PubMed

    Faggion, Clóvis M; Tu, Yu-Kang

    2007-06-01

    Making decisions in dentistry should be based on the best evidence available. The objective of this study was to demonstrate a practical procedure and model that clinicians can use to apply the results of well-conducted studies to patient care by critically appraising the evidence with checklists and letter grade scales. To demonstrate application of this model for critically appraising the quality of research evidence, a hypothetical case involving an adult male with chronic periodontitis is used as an example. To determine the best clinical approach for this patient, a four-step, evidence-based model is demonstrated, consisting of the following: definition of a research question using the PICO format, search and selection of relevant literature, critical appraisal of identified research reports using checklists, and the application of evidence. In this model, the quality of research evidence was assessed quantitatively based on different levels of quality that are assigned letter grades of A, B, and C by evaluating the studies against the QUOROM (Quality of Reporting Meta-Analyses) and CONSORT (Consolidated Standards of Reporting Trials) checklists in a tabular format. For this hypothetical periodontics case, application of the model identified the best available evidence for clinical decision making, i.e., one randomized controlled trial and one systematic review of randomized controlled trials. Both studies showed similar answers for the research question. The use of a letter grade scale allowed an objective analysis of the quality of evidence. A checklist-driven model that assesses and applies evidence to dental practice may substantially improve dentists' decision making skill.

  9. The influence of computer-based cognitive flexibility training on subjective cognitive well-being after stroke: A multi-center randomized controlled trial

    PubMed Central

    Murre, Jaap M. J.; Buitenweg, Jessika I. V.; Veltman, Dick J.; Aaronson, Justine A.; Nijboer, Tanja C. W.; Kruiper-Doesborgh, Suzanne J. C.; van Bennekom, Coen A. M.; Ridderinkhof, K. Richard; Schmand, Ben

    2017-01-01

    Background Stroke can result in cognitive complaints that can have a large impact on quality of life long after its occurrence. A number of computer-based training programs have been developed with the aim to improve cognitive functioning. Most studies investigating their efficacy used only objective outcome measures, whereas a reduction of subjective cognitive complaints may be equally important for improving quality of life. A few studies used subjective outcome measures but were inconclusive, partly due to methodological shortcomings such as lack of proper active and passive control groups. Objective The aim of the current study was to investigate whether computer-based cognitive flexibility training can improve subjective cognitive functioning and quality of life after stroke. Methods We performed a randomized controlled double blind trial (RCT). Adults (30–80 years old) who had a stroke 3 months to 5 years ago, were randomly assigned to either an intervention group (n = 38), an active control group (i.e., mock training; n = 35), or a waiting list control group (n = 24). The intervention and mock training consisted of 58 half-hour sessions within 12 weeks. The primary subjective outcome measures were cognitive functioning (Cognitive Failure Questionnaire), executive functioning (Dysexecutive Functioning Questionnaire), quality of life (Short Form Health Survey), instrumental activities of daily living (IADL; Lawton & Brody IADL scale), and participation in society (Utrecht Scale for Evaluation of Rehabilitation-Participation). Secondary subjective outcome measures were recovery after stroke, depressive symptoms (Hospital Anxiety Depression Scale—depression subscale), fatigue (Checklist Individual Strength—Fatigue subscale), and subjective cognitive improvement (exit list). Finally, a proxy of the participant rated the training effects in subjective cognitive functioning, subjective executive functioning, and IADL. Results and conclusions All groups improved on the two measures of subjective cognitive functioning and subjective executive functioning, but not on the other measures. These cognitive and executive improvements remained stable 4 weeks after training completion. However, the intervention group did not improve more than the two control groups. This suggests that improvement was due to training-unspecific effects. The proxies did not report any improvements. We, therefore, conclude that the computer-based cognitive flexibility training did not improve subjective cognitive functioning or quality of life after stroke. PMID:29145410

  10. Piloted simulator investigation of helicopter control systems effects on handling qualities during instrument flight

    NASA Technical Reports Server (NTRS)

    Forrest, R. D.; Chen, R. T. N.; Gerdes, R. M.; Alderete, T. S.; Gee, D. R.

    1979-01-01

    An exploratory piloted simulation was conducted to investigate the effects of the characteristics of helicopter flight control systems on instrument flight handling qualities. This joint FAA/NASA study was motivated by the need to improve instrument flight capability. A near-term objective is to assist in updating the airworthiness criteria for helicopter instrument flight. The experiment consisted of variations of single-rotor helicopter types and levels of stability and control augmentation systems (SCAS). These configurations were evaluated during an omnirange approach task under visual and instrument flight conditions. The levels of SCAS design included a simple rate damping system, collective decoupling plus rate damping, and an attitude command system with collective decoupling. A limited evaluation of stick force versus airspeed stability was accomplished. Some problems were experienced with control system mechanization which had a detrimental effect on longitudinal stability. Pilot ratings, pilot commentary, and performance data related to the task are presented.

  11. Tear film aberration dynamics and vision-related quality of life in patients with dry eye disease.

    PubMed

    Denoyer, Alexandre; Rabut, Ghislaine; Baudouin, Christophe

    2012-09-01

    Corneal and ocular wavefront aberrations were recorded together with clinical examination results and patient-reported vision-related quality-of-life evaluation results to define the relevance of dynamic optical analysis of the eye in dry eye disease (DED). Prospective and comparative clinical study. Forty DED patients and 40 age- and gender-matched control subjects. Serial measurements of ocular and corneal higher-order aberrations (HOAs) after blink were performed for 10 seconds using the KR-1 aberrometer (Topcon, Clichy, France). Vision-related health-targeted quality of life was evaluated using the Ocular Surface Disease Index (OSDI) questionnaire. The clinical examination included tear film assessment (tear film break-up time and Schirmer I test), ocular surface damage assessment with the Oxford and van Bijsterveld indexes, and Meibomian dysfunction grading. Tear osmolarity also was measured. The time course of HOAs and modulation transfer function (MTF) was compared between groups and was analyzed in comparison with the OSDI and clinical data in DED patients. The root mean square of ocular and corneal total HOAs, particularly third-order aberrations, significantly increased over the 10-second period in DED patients, whereas no change occurred in controls. Analysis of MTF revealed progressive degradation of ocular optical quality resulting from loss of contrast at intermediate and high spatial frequencies in DED patients compared with controls. The progression index for corneal HOAs was correlated with the subjective index of patient-reported visual outcomes and with objective clinical findings of tear film and ocular surface damage. Objective measurement of the time course of HOAs may constitute a new single instrument to evaluate and manage patients with DED because it reliably reflects the completeness of the disease. Copyright © 2012 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

  12. Using game theory for perceptual tuned rate control algorithm in video coding

    NASA Astrophysics Data System (ADS)

    Luo, Jiancong; Ahmad, Ishfaq

    2005-03-01

    This paper proposes a game theoretical rate control technique for video compression. Using a cooperative gaming approach, which has been utilized in several branches of natural and social sciences because of its enormous potential for solving constrained optimization problems, we propose a dual-level scheme to optimize the perceptual quality while guaranteeing "fairness" in bit allocation among macroblocks. At the frame level, the algorithm allocates target bits to frames based on their coding complexity. At the macroblock level, the algorithm distributes bits to macroblocks by defining a bargaining game. Macroblocks play cooperatively to compete for shares of resources (bits) to optimize their quantization scales while considering the Human Visual System"s perceptual property. Since the whole frame is an entity perceived by viewers, macroblocks compete cooperatively under a global objective of achieving the best quality with the given bit constraint. The major advantage of the proposed approach is that the cooperative game leads to an optimal and fair bit allocation strategy based on the Nash Bargaining Solution. Another advantage is that it allows multi-objective optimization with multiple decision makers (macroblocks). The simulation results testify the algorithm"s ability to achieve accurate bit rate with good perceptual quality, and to maintain a stable buffer level.

  13. The effect of aromatherapy and massage administered in different ways to women with breast cancer on their symptoms and quality of life.

    PubMed

    Ovayolu, Ozlem; Seviğ, Umit; Ovayolu, Nimet; Sevinç, Alper

    2014-08-01

    The primary objective of this study was to assess the effect of aromatherapy and classic massage administered in various ways to breast cancer patients on their symptoms and quality of life. The sampling consisted of 280 patients. Quality of life and symptoms of the patients were evaluated once at baseline and then at week 6 and week 10 following the intervention. After intervention, the control group was observed to have lower total quality of life score and subdomain scores, whereas fragrance, massage and aromatherapy massage groups had higher scores, and the increase was more obvious particularly in the patients in the aromatherapy massage group. Similarly, whereas psychological and physical symptoms were experienced more intensely in the control group, the severity of all the symptoms experienced by the other patients decreased at week 6 and week 10 as compared with baseline especially in the group that was administered massage with aromatherapy. © 2013 Wiley Publishing Asia Pty Ltd.

  14. Do Personality Problems Improve During Psychodynamic Supportive-Expressive Psychotherapy? Secondary Outcome Results From a Randomized Controlled Trial for Psychiatric Outpatients with Personality Disorders

    PubMed Central

    Vinnars, Bo; Thormählen, Barbro; Gallop, Robert; Norén, Kristina; Barber, Jacques P.

    2009-01-01

    Studies involving patients with personality disorders (PD) have not focused on improvement of core aspects of the PD. This paper examines changes in quality of object relations, interpersonal problems, psychological mindedness, and personality traits in a sample of 156 patients with DSM-IV PD diagnoses being randomized to either manualized or non manualized dynamic psychotherapy. Effect sizes adjusted for symptomatic change and reliable change indices were calculated. We found that both treatments were equally effective at reducing personality pathology. Only in neuroticism did the non manualized group do better during the follow-up period. The largest improvement was found in quality of object relations. For the remaining variables only small and clinically insignificant magnitudes of change were found. PMID:20161588

  15. Restless Legs Syndrome and Poor Sleep Quality in Obese Children and Adolescents

    PubMed Central

    Baran, Rıza Taner; Atar, Müge; Pirgon, Özgür; Filiz, Serkan; Filiz, Meral

    2018-01-01

    Objective: Adult epidemiological studies suggest that the rate of Restless Legs syndrome (RLS) in the general population may range from 5% to 15%. The aim of this study was to investigate the frequency of RLS in a community sample of obese adolescents aged 10-16 years and to assess the association with sleep quality and health-related glucose metabolism markers. Methods: The study group comprised 144 obese and overweight children aged 10-16 yearsand the control group consisted of 66 age-matched healthy children. The RLS Questionnaire devised by the International RLS Study and the Pittsburgh Sleep Quality Index (PSQI), where a score >5 indicates poor sleep quality, was used to assess sleep quality. Results: Mean body mass index (BMI) of the overweight/obese and control groups were 30.5±0.5 and 18.7±0.2, respectively. The frequency of RLS was higher in the obese group (21.7%) than the overweight (3.4%) and control (1.5%) (p<0.001) groups. The frequency of a poor PSQI score was significantly higher (p<0.001) in the obese group (37.3%) than the control group (24.2%). The obese with RLS group also had poorer sleep quality scores than the non-RLS obese group. Many symptoms of sleep disruption were more common in obese patients with RLS and RLS was independently correlated with a high PSQI score [odds ratio (OR): 2.25, confidence interval (Cl): 0.96-5.28, p<0.001)] and an increased BMI z-score (OR: 8.87, Cl: 2.04-38.61, p<0.001). Conclusion: RLS is common in obese children and may be associated with altered sleep quality. Obese children with RLS need to be assessed since they may need support to improve their sleep quality. PMID:29175807

  16. The effects of Sahaja Yoga meditation on mental health: a systematic review.

    PubMed

    Hendriks, Tom

    2018-05-30

    Objectives To determine the efficacy of Sahaja Yoga (SY) meditation on mental health among clinical and healthy populations. Methods All publications on SY were eligible. Databases were searched up to November 2017, namely PubMed, MEDLINE (NLM), PsychINFO, and Scopus. An internet search (Google Scholar) was also conducted. The quality of the randomized controlled trails was assessed using the Cochrane Risk Assessment for Bias. The quality of cross-sectional studies, a non-randomized controlled trial and a cohort study was assessed with the Newcastle-Ottawa Quality Assessment Scale. Results We included a total of eleven studies; four randomized controlled trials, one non-randomized controlled trial, five cross-sectional studies, and one prospective cohort study. The studies included a total of 910 participants. Significant findings were reported in relation to the following outcomes: anxiety, depression, stress, subjective well-being, and psychological well-being. Two randomized studies were rated as high quality studies, two randomized studies as low quality studies. The quality of the non-randomized trial, the cross-sectional studies and the cohort study was high. Effect sizes could not be calculated in five studies due to unclear or incomplete reporting. Conclusions After reviewing the articles and taking the quality of the studies into account, it appears that SY may reduce depression and possibly anxiety. In addition, the practice of SY is also associated with increased subjective wellbeing and psychological well-beng. However, due to the limited number of publications, definite conclusions on the effects of SY cannot be made and more high quality randomized studies are needed to justify any firm conclusions on the beneficial effects of SY on mental health.

  17. Flight Test of an Adaptive Controller and Simulated Failure/Damage on the NASA NF-15B

    NASA Technical Reports Server (NTRS)

    Buschbacher, Mark; Maliska, Heather

    2006-01-01

    The method of flight-testing the Intelligent Flight Control System (IFCS) Second Generation (Gen-2) project on the NASA NF-15B is herein described. The Gen-2 project objective includes flight-testing a dynamic inversion controller augmented by a direct adaptive neural network to demonstrate performance improvements in the presence of simulated failure/damage. The Gen-2 objectives as implemented on the NASA NF-15B created challenges for software design, structural loading limitations, and flight test operations. Simulated failure/damage is introduced by modifying control surface commands, therefore requiring structural loads measurements. Flight-testing began with the validation of a structural loads model. Flight-testing of the Gen-2 controller continued, using test maneuvers designed in a sequenced approach. Success would clear the new controller with respect to dynamic response, simulated failure/damage, and with adaptation on and off. A handling qualities evaluation was conducted on the capability of the Gen-2 controller to restore aircraft response in the presence of a simulated failure/damage. Control room monitoring of loads sensors, flight dynamics, and controller adaptation, in addition to postflight data comparison to the simulation, ensured a safe methodology of buildup testing. Flight-testing continued without major incident to accomplish the project objectives, successfully uncovering strengths and weaknesses of the Gen-2 control approach in flight.

  18. A stochastic optimal feedforward and feedback control methodology for superagility

    NASA Technical Reports Server (NTRS)

    Halyo, Nesim; Direskeneli, Haldun; Taylor, Deborah B.

    1992-01-01

    A new control design methodology is developed: Stochastic Optimal Feedforward and Feedback Technology (SOFFT). Traditional design techniques optimize a single cost function (which expresses the design objectives) to obtain both the feedforward and feedback control laws. This approach places conflicting demands on the control law such as fast tracking versus noise atttenuation/disturbance rejection. In the SOFFT approach, two cost functions are defined. The feedforward control law is designed to optimize one cost function, the feedback optimizes the other. By separating the design objectives and decoupling the feedforward and feedback design processes, both objectives can be achieved fully. A new measure of command tracking performance, Z-plots, is also developed. By analyzing these plots at off-nominal conditions, the sensitivity or robustness of the system in tracking commands can be predicted. Z-plots provide an important tool for designing robust control systems. The Variable-Gain SOFFT methodology was used to design a flight control system for the F/A-18 aircraft. It is shown that SOFFT can be used to expand the operating regime and provide greater performance (flying/handling qualities) throughout the extended flight regime. This work was performed under the NASA SBIR program. ICS plans to market the software developed as a new module in its commercial CACSD software package: ACET.

  19. Plan–Provider Integration, Premiums, and Quality in the Medicare Advantage Market

    PubMed Central

    Frakt, Austin B; Pizer, Steven D; Feldman, Roger

    2013-01-01

    Objective. To investigate how integration between Medicare Advantage plans and health care providers is related to plan premiums and quality ratings. Data Source. We used public data from the Centers for Medicare and Medicaid Services (CMS) and the Area Resource File and private data from one large insurer. Premiums and quality ratings are from 2009 CMS administrative files and some control variables are historical. Study Design. We estimated ordinary least-squares models for premiums and plan quality ratings, with state fixed effects and firm random effects. The key independent variable was an indicator of plan–provider integration. Data Collection. With the exception of Medigap premium data, all data were publicly available. We ascertained plan–provider integration through examination of plans’ websites and governance documents. Principal Findings. We found that integrated plan–providers charge higher premiums, controlling for quality. Such plans also have higher quality ratings. We found no evidence that integration is associated with more generous benefits. Conclusions. Current policy encourages plan–provider integration, although potential effects on health insurance products and markets are uncertain. Policy makers and regulators may want to closely monitor changes in premiums and quality after integration and consider whether quality improvement (if any) justifies premium increases (if they occur). PMID:23800017

  20. Improvement of mood and sleep alterations in posttraumatic stress disorder patients by eye movement desensitization and reprocessing

    PubMed Central

    Raboni, Mara R.; Alonso, Fabiana F. D.; Tufik, Sergio; Suchecki, Deborah

    2014-01-01

    Posttraumatic stress disorder (PTSD) patients exhibit depressive and anxiety symptoms, in addition to nightmares, which interfere with sleep continuity. Pharmacologic treatment of these sleep problems improves PTSD symptoms, but very few studies have used psychotherapeutic interventions to treat PTSD and examined their effects on sleep quality. Therefore, in the present study, we sought to investigate the effects of Eye Movement Desensitization Reprocessing therapy on indices of mood, anxiety, subjective, and objective sleep. The sample was composed of 11 healthy controls and 13 PTSD patients that were victims of assault and/or kidnapping. All participants were assessed before, and 1 day after, the end of treatment for depressive and anxiety profile, general well-being and subjective sleep by filling out specific questionnaires. In addition, objective sleep patterns were evaluated by polysomnographic recording. Healthy volunteers were submitted to the therapy for three weekly sessions, whereas PTSD patients underwent five sessions, on average. Before treatment, PTSD patients exhibited high levels of anxiety and depression, poor quality of life and poor sleep, assessed both subjectively and objectively; the latter was reflected by increased time of waking after sleep onset. After completion of treatment, patients exhibited improvement in depression and anxiety symptoms, and in quality of life; with indices that were no longer different from control volunteers. Moreover, these patients showed more consolidated sleep, with reduction of time spent awake after sleep onset. In conclusion, Eye Movement Desensitization and Reprocessing was an effective treatment of PTSD patients and improved the associated sleep and psychological symptoms. PMID:24959123

  1. Life quality assessment among patients with atopic eczema.

    PubMed

    Holm, E A; Wulf, H C; Stegmann, H; Jemec, G B E

    2006-04-01

    Quantification of quality of life (QoL) related to disease severity is important in patients with atopic eczema (AE), because the assessment provides additional information to the traditional objective clinical scoring systems. To measure health-related QoL (HRQoL) in patients with AE; to analyse discriminant, divergent and convergent validity by examining the association between various QoL methods; and to examine the association between disease severity assessed by an objective Severity Scoring of Atopic Dermatitis (SCORAD) and QoL. HRQoL was assessed at two visits at a 6-monthly interval in 101 patients with AE and 30 controls with one dermatology-specific questionnaire [Dermatology Life Quality Index (DLQI) or Children's DLQI (CDLQI)], one generic instrument (SF-36) and three visual analogue scales (VASs) of severity and pruritus. Objective SCORAD was used to measure disease severity. Patients with AE had significantly lower QoL than healthy controls and the general population. DLQI /CDLQI, pruritus, and patient and investigator overall assessment of eczema severity were significantly (P < 0.0001) and positively correlated with SCORAD, while the generic questionnaire showed only poor correlation. A gender difference was found for the mental component score of SF-36 (P = 0.019). AE has an impact on HRQoL. Patients' mental health, social functioning and role emotional functioning seem to be more affected than physical functioning. A simple VAS score of patients' assessment of disease severity showed the highest and most significant correlations with most of the HRQoL methods used. There is evidence to support the ability of patients with AE to make an accurate determination of their disease severity and QoL.

  2. The impact of posttraumatic stress disorder on quality of life and health service utilization among veterans who have schizophrenia.

    PubMed

    Calhoun, Patrick S; Bosworth, Hayden B; Stechuchak, Karen A; Strauss, Jennifer; Butterfield, Marian I

    2006-06-01

    The present study examined the impact of comorbid posttraumatic stress disorder (PTSD) on health-related quality of life and objective measures of health service utilization in 165 male veterans who have primary schizophrenia. Comorbid PTSD was assessed with the PTSD Checklist. Comorbid PTSD was significantly associated with decreased quality of life and increased medical service utilization, including increased psychiatric hospitalization and increased outpatient physical health visits, even after controlling for other clinical and demographic variables among this sample of patients who had primary schizophrenia. Veterans who have schizophrenia should be screened carefully for exposure to trauma and posttraumatic stress disorder.

  3. Effects of Exercise on Spinal Deformities and Quality of Life in Patients with Adolescent Idiopathic Scoliosis

    PubMed Central

    Anwer, Shahnawaz; Alghadir, Ahmad; Abu Shaphe, Md.; Anwar, Dilshad

    2015-01-01

    Objectives. This systematic review was conducted to examine the effects of exercise on spinal deformities and quality of life in patients with adolescent idiopathic scoliosis (AIS). Data Sources. Electronic databases, including PubMed, CINAHL, Embase, Scopus, Cochrane Register of Controlled Trials, PEDro, and Web of Science, were searched for research articles published from the earliest available dates up to May 31, 2015, using the key words “exercise,” “postural correction,” “posture,” “postural curve,” “Cobb's angle,” “quality of life,” and “spinal deformities,” combined with the Medical Subject Heading “scoliosis.” Study Selection. This systematic review was restricted to randomized and nonrandomized controlled trials on AIS published in English language. The quality of selected studies was assessed by the PEDro scale, the Cochrane Collaboration's tool, and the Grading of Recommendations Assessment, Development, and Evaluation System (GRADE). Data Extraction. Descriptive data were collected from each study. The outcome measures of interest were Cobb angle, trunk rotation, thoracic kyphosis, lumbar kyphosis, vertebral rotation, and quality of life. Data Synthesis. A total of 30 studies were assessed for eligibility. Six of the 9 selected studies reached high methodological quality on the PEDro scale. Meta-analysis revealed moderate-quality evidence that exercise interventions reduce the Cobb angle, angle of trunk rotation, thoracic kyphosis, and lumbar lordosis and low-quality evidence that exercise interventions reduce average lateral deviation. Meta-analysis revealed moderate-quality evidence that exercise interventions improve the quality of life. Conclusions. A supervised exercise program was superior to controls in reducing spinal deformities and improving the quality of life in patients with AIS. PMID:26583083

  4. To dance or not to dance? A comparison of balance, physical fitness and quality of life in older Irish set dancers and age-matched controls.

    PubMed

    Shanahan, J; Coman, L; Ryan, F; Saunders, J; O'Sullivan, K; Ni Bhriain, O; Clifford, A M

    2016-12-01

    The objective of this study is to determine if older adults regularly participating in Irish set dancing have superior balance, physical fitness and quality of life compared to age-matched controls. This study used a community-based, observational cross-sectional design. Regular set dancers (n = 39) and age-matched controls (n = 33) were recruited. Participants were assessed using the physical activity scale for the elderly (physical activity levels), mini-BESTest (balance) and senior fitness test (battery of functional fitness tests). Quality of life was also assessed using the EuroQol EQ visual analogue scale. When controlling for between-group differences in levels of physical activity (ANCOVA analysis), the dancers had significantly better balance, functional capacity and quality of life (all P < 0.05) compared to controls. No differences between the groups were observed in other measures of functional fitness. The findings of this study suggest regular participation in set dancing is associated with health benefits for older adults. These results may inform future studies prospectively examining the role of set dancing for falls prevention, emotional well-being and cognitive function in community-dwelling older adults. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  5. Implementation of the Secondary 3 Program of Project P.A.T.H.S.: observations based on the co-walker scheme.

    PubMed

    Shek, Daniel T L; Ma, Cecilia M S

    2012-01-17

    The present study was conducted to explore the implementation quality of the Secondary 3 Program of the Tier 1 Program of Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes) in the third year of the Full Implementation Phase. Classroom observations of 182 units in 129 schools were conducted. Results showed that the overall level of program adherence was 73.9%. Thirteen aspects concerning program delivery were significantly correlated. Multiple regression analyses revealed that overall implementation quality was significantly predicted by student participation and involvement, strategies to enhance student motivation, use of positive and supportive feedback, degree of achievement of the objectives, and lesson preparation. Success of implementation was significantly predicted by student participation and involvement, classroom control, use of positive and supportive feedback, opportunity for reflection, degree of achievement of the objectives and time management. The present findings generally suggest that the implementation quality of Project P.A.T.H.S. was high.

  6. Water Quality Planning in Rivers: Assimilative Capacity and Dilution Flow.

    PubMed

    Hashemi Monfared, Seyed Arman; Dehghani Darmian, Mohsen; Snyder, Shane A; Azizyan, Gholamreza; Pirzadeh, Bahareh; Azhdary Moghaddam, Mehdi

    2017-11-01

    Population growth, urbanization and industrial expansion are consequentially linked to increasing pollution around the world. The sources of pollution are so vast and also include point and nonpoint sources, with intrinsic challenge for control and abatement. This paper focuses on pollutant concentrations and also the distance that the pollution is in contact with the river water as objective functions to determine two main necessary characteristics for water quality management in the river. These two necessary characteristics are named assimilative capacity and dilution flow. The mean area of unacceptable concentration [Formula: see text] and affected distance (X) are considered as two objective functions to determine the dilution flow by a non-dominated sorting genetic algorithm II (NSGA-II) optimization algorithm. The results demonstrate that the variation of river flow discharge in different seasons can modify the assimilation capacity up to 97%. Moreover, when using dilution flow as a water quality management tool, results reveal that the content of [Formula: see text] and X change up to 97% and 93%, respectively.

  7. 3D shape measurement of moving object with FFT-based spatial matching

    NASA Astrophysics Data System (ADS)

    Guo, Qinghua; Ruan, Yuxi; Xi, Jiangtao; Song, Limei; Zhu, Xinjun; Yu, Yanguang; Tong, Jun

    2018-03-01

    This work presents a new technique for 3D shape measurement of moving object in translational motion, which finds applications in online inspection, quality control, etc. A low-complexity 1D fast Fourier transform (FFT)-based spatial matching approach is devised to obtain accurate object displacement estimates, and it is combined with single shot fringe pattern prolometry (FPP) techniques to achieve high measurement performance with multiple captured images through coherent combining. The proposed technique overcomes some limitations of existing ones. Specifically, the placement of marks on object surface and synchronization between projector and camera are not needed, the velocity of the moving object is not required to be constant, and there is no restriction on the movement trajectory. Both simulation and experimental results demonstrate the effectiveness of the proposed technique.

  8. Automated daily quality control analysis for mammography in a multi-unit imaging center.

    PubMed

    Sundell, Veli-Matti; Mäkelä, Teemu; Meaney, Alexander; Kaasalainen, Touko; Savolainen, Sauli

    2018-01-01

    Background The high requirements for mammography image quality necessitate a systematic quality assurance process. Digital imaging allows automation of the image quality analysis, which can potentially improve repeatability and objectivity compared to a visual evaluation made by the users. Purpose To develop an automatic image quality analysis software for daily mammography quality control in a multi-unit imaging center. Material and Methods An automated image quality analysis software using the discrete wavelet transform and multiresolution analysis was developed for the American College of Radiology accreditation phantom. The software was validated by analyzing 60 randomly selected phantom images from six mammography systems and 20 phantom images with different dose levels from one mammography system. The results were compared to a visual analysis made by four reviewers. Additionally, long-term image quality trends of a full-field digital mammography system and a computed radiography mammography system were investigated. Results The automated software produced feature detection levels comparable to visual analysis. The agreement was good in the case of fibers, while the software detected somewhat more microcalcifications and characteristic masses. Long-term follow-up via a quality assurance web portal demonstrated the feasibility of using the software for monitoring the performance of mammography systems in a multi-unit imaging center. Conclusion Automated image quality analysis enables monitoring the performance of digital mammography systems in an efficient, centralized manner.

  9. A Systematic Review of Dextrose Prolotherapy for Chronic Musculoskeletal Pain

    PubMed Central

    Hauser, Ross A.; Lackner, Johanna B.; Steilen-Matias, Danielle; Harris, David K.

    2016-01-01

    OBJECTIVE The aim of this study was to systematically review dextrose (d-glucose) prolotherapy efficacy in the treatment of chronic musculoskeletal pain. DATA SOURCES Electronic databases PubMed, Healthline, OmniMedicalSearch, Medscape, and EMBASE were searched from 1990 to January 2016. STUDY SELECTION Prospectively designed studies that used dextrose as the sole active prolotherapy constituent were selected. DATA EXTRACTION Two independent reviewers rated studies for quality of evidence using the Physiotherapy Evidence Database assessment scale for randomized controlled trials (RCTs) and the Downs and Black evaluation tool for non-RCTs, for level of evidence using a modified Sackett scale, and for clinically relevant pain score difference using minimal clinically important change criteria. Study population, methods, and results data were extracted and tabulated. DATA SYNTHESIS Fourteen RCTs, 1 case–control study, and 18 case series studies met the inclusion criteria and were evaluated. Pain conditions were clustered into tendinopathies, osteoarthritis (OA), spinal/pelvic, and myofascial pain. The RCTs were high-quality Level 1 evidence (Physiotherapy Evidence Database ≥8) and found dextrose injection superior to controls in Osgood–Schlatter disease, lateral epicondylitis of the elbow, traumatic rotator cuff injury, knee OA, finger OA, and myofascial pain; in biomechanical but not subjective measures in temporal mandibular joint; and comparable in a short-term RCT but superior in a long-term RCT in low back pain. Many observational studies were of high quality and reported consistent positive evidence in multiple studies of tendinopathies, knee OA, sacroiliac pain, and iliac crest pain that received RCT confirmation in separate studies. Eighteen studies combined patient self-rating (subjective) with psychometric, imaging, and/or biomechanical (objective) outcome measurement and found both positive subjective and objective outcomes in 16 studies and positive objective but not subjective outcomes in two studies. All 15 studies solely using subjective or psychometric measures reported positive findings. CONCLUSION Use of dextrose prolotherapy is supported for treatment of tendinopathies, knee and finger joint OA, and spinal/pelvic pain due to ligament dysfunction. Efficacy in acute pain, as first-line therapy, and in myofascial pain cannot be determined from the literature. PMID:27429562

  10. Parenting Intervention Combined With Acceptance and Commitment Therapy: A Trial With Families of Children With Cerebral Palsy

    PubMed Central

    Sanders, Matthew R.; McKinlay, Lynne; Boyd, Roslyn N.

    2016-01-01

    Objective To examine the effects of Stepping Stones Triple P (SSTP) and Acceptance and Commitment Therapy (ACT) on child functioning, quality of life, and parental adjustment. Method 67 parents (97.0% mothers) of children (64.2% male; mean age 5.3 ± 3.0 years) with cerebral palsy participated in a randomized controlled trial with three groups: wait-list control, SSTP, and SSTP + ACT. This article details the secondary outcomes. Results In comparison with wait-list, the SSTP + ACT group showed increased functional performance and quality of life as well as decreased parental psychological symptoms. No differences were found for parental confidence. No differences were found between SSTP and wait-list or between SSTP and SSTP + ACT. Conclusions ACT-integrated parenting intervention may be an effective way to target child functioning, quality of life, and parental adjustment. PMID:26702629

  11. Effects of Irradiation Dose on Sterility Induction and Quality Parameters of Drosophila suzukii (Diptera: Drosophilidae).

    PubMed

    Krüger, Alexandra Peter; Schlesener, Daniele Cristine Hoffmann; Martins, Liliane Nachtigall; Wollmann, Jutiane; Deprá, Maríndia; Garcia, Flávio Roberto Mello

    2018-04-02

    Drosophila suzukii (Matsumura, 1931) (Diptera: Drosophilidae) is a widely distributed pest of soft-skinned and stone fruits that is controlled mainly with pesticides. An alternative to the chemical control is the sterile insect technique (SIT), an ecologically friendly method of pest management that could be used against D. suzukii. The objective of the present study was to evaluate the effects of gamma radiation on reproductive sterility, ovarian morphometry, and quality parameters of D. suzukii. Full female sterility was achieved at 75 Gy, while an adequate level of male sterility (99.67%) was obtained at 200 Gy. The ovarian size showed an exponential decay in function of irradiation dose increase. There was no significant influence of irradiation dose on the quality parameters evaluated. Our data suggest that gamma radiation can be recommended to be used in an SIT program for D. suzukii.

  12. Calculating and controlling the error of discrete representations of Pareto surfaces in convex multi-criteria optimization.

    PubMed

    Craft, David

    2010-10-01

    A discrete set of points and their convex combinations can serve as a sparse representation of the Pareto surface in multiple objective convex optimization. We develop a method to evaluate the quality of such a representation, and show by example that in multiple objective radiotherapy planning, the number of Pareto optimal solutions needed to represent Pareto surfaces of up to five dimensions grows at most linearly with the number of objectives. The method described is also applicable to the representation of convex sets. Copyright © 2009 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  13. SAMI: Sydney-AAO Multi-object Integral field spectrograph pipeline

    NASA Astrophysics Data System (ADS)

    Allen, J. T.; Green, A. W.; Fogarty, L. M. R.; Sharp, R.; Nielsen, J.; Konstantopoulos, I.; Taylor, E. N.; Scott, N.; Cortese, L.; Richards, S. N.; Croom, S.; Owers, M. S.; Bauer, A. E.; Sweet, S. M.; Bryant, J. J.

    2014-07-01

    The SAMI (Sydney-AAO Multi-object Integral field spectrograph) pipeline reduces data from the Sydney-AAO Multi-object Integral field spectrograph (SAMI) for the SAMI Galaxy Survey. The python code organizes SAMI data and, along with the AAO 2dfdr package, carries out all steps in the data reduction, from raw data to fully calibrated datacubes. The principal steps are: data management, use of 2dfdr to produce row-stacked spectra, flux calibration, correction for telluric absorption, removal of atmospheric dispersion, alignment of dithered exposures, and drizzling onto a regular output grid. Variance and covariance information is tracked throughout the pipeline. Some quality control routines are also included.

  14. Dosimetry and image quality assessment in a direct radiography system

    PubMed Central

    Oliveira, Bruno Beraldo; de Oliveira, Marcio Alves; Paixão, Lucas; Teixeira, Maria Helena Araújo; Nogueira, Maria do Socorro

    2014-01-01

    Objective To evaluate the mean glandular dose with a solid state detector and the image quality in a direct radiography system, utilizing phantoms. Materials and Methods Irradiations were performed with automatic exposure control and polymethyl methacrylate slabs with different thicknesses to calculate glandular dose values. The image quality was evaluated by means of the structures visualized on the images of the phantoms. Results Considering the uncertainty of the measurements, the mean glandular dose results are in agreement with the values provided by the equipment and with internationally adopted reference levels. Results obtained from images of the phantoms were in agreement with the reference values. Conclusion The present study contributes to verify the equipment conformity as regards dose values and image quality. PMID:25741119

  15. Robust Feedback Zoom Tracking for Digital Video Surveillance

    PubMed Central

    Zou, Tengyue; Tang, Xiaoqi; Song, Bao; Wang, Jin; Chen, Jihong

    2012-01-01

    Zoom tracking is an important function in video surveillance, particularly in traffic management and security monitoring. It involves keeping an object of interest in focus during the zoom operation. Zoom tracking is typically achieved by moving the zoom and focus motors in lenses following the so-called “trace curve”, which shows the in-focus motor positions versus the zoom motor positions for a specific object distance. The main task of a zoom tracking approach is to accurately estimate the trace curve for the specified object. Because a proportional integral derivative (PID) controller has historically been considered to be the best controller in the absence of knowledge of the underlying process and its high-quality performance in motor control, in this paper, we propose a novel feedback zoom tracking (FZT) approach based on the geometric trace curve estimation and PID feedback controller. The performance of this approach is compared with existing zoom tracking methods in digital video surveillance. The real-time implementation results obtained on an actual digital video platform indicate that the developed FZT approach not only solves the traditional one-to-many mapping problem without pre-training but also improves the robustness for tracking moving or switching objects which is the key challenge in video surveillance. PMID:22969388

  16. Function evaluation of asphalt mixture with industrially produced BOF slag aggregate.

    PubMed

    Zhao, Meiling; Wu, Shaopeng; Chen, Zongwu; Li, Chao

    2016-07-04

    Laboratory research suggested that basic oxygen furnace (BOF) slag-based asphalt mixture was a functional material. However, the BOF slag aggregate's quality was difficult to control when it was heavily used in entity engineering. The primary objective of this research was to evaluate the functional performances of asphalt mixture containing BOF slag coarse aggregate (BSCA), which was from an industrialized production line. Limestone mixture was a control group. The Marshall method was first adopted to design asphalt mixtures. The performances of limestone asphalt mixture and BOF slag asphalt mixture including fatigue failure resistance and moisture stability were then evaluated and compared. Results showed that the asphalt mixture containing BSCA possessed better durability, which meant the quality of BSCA from industrialized production lines was well controlled and this BSCA can be heavily used in entity engineering.

  17. Power Quality Improvement Utilizing Photovoltaic Generation Connected to a Weak Grid

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Muljadi, Eduard; Tumbelaka, Hanny H.; Gao, Wenzhong

    Microgrid research and development in the past decades have been one of the most popular topics. Similarly, the photovoltaic generation has been surging among renewable generation in the past few years, thanks to the availability, affordability, technology maturity of the PV panels and the PV inverter in the general market. Unfortunately, quite often, the PV installations are connected to weak grids and may have been considered as the culprit of poor power quality affecting other loads in particular sensitive loads connected to the same point of common coupling (PCC). This paper is intended to demystify the renewable generation, and turnsmore » the negative perception into positive revelation of the superiority of PV generation to the power quality improvement in a microgrid system. The main objective of this work is to develop a control method for the PV inverter so that the power quality at the PCC will be improved under various disturbances. The method is to control the reactive current based on utilizing the grid current to counteract the negative impact of the disturbances. The proposed control method is verified in PSIM platform. Promising results have been obtained.« less

  18. The European general thoracic surgery database project.

    PubMed

    Falcoz, Pierre Emmanuel; Brunelli, Alessandro

    2014-05-01

    The European Society of Thoracic Surgeons (ESTS) Database is a free registry created by ESTS in 2001. The current online version was launched in 2007. It runs currently on a Dendrite platform with extensive data security and frequent backups. The main features are a specialty-specific, procedure-specific, prospectively maintained, periodically audited and web-based electronic database, designed for quality control and performance monitoring, which allows for the collection of all general thoracic procedures. Data collection is the "backbone" of the ESTS database. It includes many risk factors, processes of care and outcomes, which are specially designed for quality control and performance audit. The user can download and export their own data and use them for internal analyses and quality control audits. The ESTS database represents the gold standard of clinical data collection for European General Thoracic Surgery. Over the past years, the ESTS database has achieved many accomplishments. In particular, the database hit two major milestones: it now includes more than 235 participating centers and 70,000 surgical procedures. The ESTS database is a snapshot of surgical practice that aims at improving patient care. In other words, data capture should become integral to routine patient care, with the final objective of improving quality of care within Europe.

  19. Affective symptoms and determinants of health-related quality of life in Mexican people with epilepsy.

    PubMed

    Camara-Lemarroy, Carlos R; Hoyos, Mariana; Ibarra-Yruegas, Beatriz E; Díaz-Torres, Marco A; De León, Rolando

    2017-10-01

    Epilepsy is known to be associated with multiple psychiatric comorbidities, such as depression, sleep-disorders, and anxiety. The objective of this study was to determine the prevalence and impact of affective symptoms over health-related quality of life (QOL) in Mexican people with epilepsy (PWE). We performed a cross-sectional observational study on 73 consecutive PWE and corresponding age- and sex-matched controls. HrQOL was assessed using the QOLIE-10 (QOL in Epilepsy-10) instrument. Clinical and demographic characteristics were recorded, and instruments evaluating depressive/anxiety symptoms, sleep quality, and insomnia were completed. PWE had more depressive/anxiety symptoms when compared with controls. QOLIE-10 scores were significantly inversely correlated with poor sleep quality, insomnia symptoms, depressive/anxiety symptoms, and number of anti-epileptic drugs used, but not with seizure type or number of seizures per month. A poor QOL was independently associated only with anti-epileptic drug polytherapy. PWE are burdened with depressive/anxiety symptoms at alarming rates. The presence of depressive symptoms along with sleep disturbances and more significantly, anti-epileptic drug polytherapy, appears to negatively impact QOL, to a greater degree than short-term seizure control.

  20. Dietary effects on object recognition: The impact of high-fat high-sugar diets on recollection and familiarity-based memory.

    PubMed

    Tran, Dominic M D; Westbrook, R Frederick

    2018-05-31

    Exposure to a high-fat high-sugar (HFHS) diet rapidly impairs novel-place- but not novel-object-recognition memory in rats (Tran & Westbrook, 2015, 2017). Three experiments sought to investigate the generality of diet-induced cognitive deficits by examining whether there are conditions under which object-recognition memory is impaired. Experiments 1 and 3 tested the strength of short- and long-term object-memory trace, respectively, by varying the interval of time between object familiarization and subsequent novel object test. Experiment 2 tested the effect of increasing working memory load on object-recognition memory by interleaving additional object exposures between familiarization and test in an n-back style task. Experiments 1-3 failed to detect any differences in object recognition between HFHS and control rats. Experiment 4 controlled for object novelty by separately familiarizing both objects presented at test, which included one remote-familiar and one recent-familiar object. Under these conditions, when test objects differed in their relative recency, HFHS rats showed a weaker memory trace for the remote object compared to chow rats. This result suggests that the diet leaves intact recollection judgments, but impairs familiarity judgments. We speculate that the HFHS diet adversely affects "where" memories as well as the quality of "what" memories, and discuss these effects in relation to recollection and familiarity memory models, hippocampal-dependent functions, and episodic food memories. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  1. Mood, anxiety, and incomplete seizure control affect quality of life after epilepsy surgery

    PubMed Central

    Blackmon, Karen; Cong, Xiangyu; Dziura, James; Atlas, Lauren Y.; Vickrey, Barbara G.; Berg, Anne T.; Bazil, Carl W.; Langfitt, John T.; Walczak, Thaddeus S.; Sperling, Michael R.; Shinnar, Shlomo; Devinsky, Orrin

    2014-01-01

    Objective: We examined the complex relationship between depression, anxiety, and seizure control and quality of life (QOL) outcomes after epilepsy surgery. Methods: Seven epilepsy centers enrolled 373 patients and completed a comprehensive diagnostic workup and psychiatric and follow-up QOL evaluation. Subjects were evaluated before surgery and then at 3, 6, 12, 24, 48, and 60 months after surgery. Standardized assessments included the Quality of Life in Epilepsy Inventory–89, Beck Depression Inventory (BDI), and Beck Anxiety Inventory (BAI). A mixed-model repeated-measures analysis was used to analyze associations of depression, anxiety, seizure outcome, and seizure history with overall QOL score and QOL subscores (cognitive distress, physical health, mental health, epilepsy-targeted) prospectively. Results: The groups with excellent and good seizure control showed a significant positive effect on the overall QOL compared to the groups with fair and poor seizure control. The BDI and BAI scores were both highly and negatively associated with overall QOL; increases in BDI and BAI scores were associated with decreased overall QOL score. Conclusions: Depression and anxiety are strongly and independently associated with worse QOL after epilepsy surgery. Interestingly, even partial seizure control, controlling for depression and anxiety levels, improved QOL. Management of mood and anxiety is a critical component to postsurgical care. PMID:24489129

  2. Sleep positioning systems for children with cerebral palsy.

    PubMed

    Blake, Sharon F; Logan, Stuart; Humphreys, Ginny; Matthews, Justin; Rogers, Morwenna; Thompson-Coon, Joanna; Wyatt, Katrina; Morris, Christopher

    2015-01-01

    Sleep positioning systems can be prescribed for children with cerebral palsy to help reduce or prevent hip migration, provide comfort to ease pain and/or improve sleep. As sleep disturbance is common in children with developmental disabilities, with impact on their carers' sleep, and as sleep positioning systems can be expensive, guidance is needed to support decisions as to their use. To determine whether commercially-available sleep positioning systems, compared with usual care, reduce or prevent hip migration in children with cerebral palsy. Any negative effect of sleep positioning systems on hip migration will be considered within this objective.Secondary objectives were to determine the effect of sleep positioning systems on: (1) number or frequency of hip problems; (2) sleep patterns and quality; (3) quality of life of the child and family; (4) pain; and (5) physical functioning. We also sought to identify any adverse effects from using sleep positioning systems. In December 2014, we searched CENTRAL, Ovid MEDLINE, Embase, and 13 other databases. We also searched two trials registers. We applied no restrictions on date of publication, language, publication status or study design. We checked references and contacted manufacturers and authors for potentially relevant literature, and searched the internet using Google. We included all randomised controlled trials (RCTs) evaluating whole body sleep positioning systems for children and adolescents (up to 18 years of age) with cerebral palsy. Two review authors independently screened reports retrieved from the search against pre-determined inclusion criteria and assessed the quality of eligible studies.Members of the public (parent carers of children with neurodisability) contributed to this review by suggesting the topic, refining the research objectives, interpreting the findings, and reviewing the plain language summary. We did not identify any randomised controlled trials that evaluated the effectiveness of sleep positioning systems on hip migration.We did find two randomised cross-over trials that met the inclusion criteria in respect of secondary objectives relating to sleep quality and pain. Neither study reported any important difference between sleeping in sleep positioning systems and not for sleep patterns or sleep quality (two studies, 21 children, very low quality evidence) and pain (one study, 11 children, very low quality evidence). These were small studies with established users of sleep positioning systems and were judged to have high risk of bias.We found no eligible trials that explored the other secondary objectives (number or frequency of hip problems, quality of life of the child and family, physical functioning, and adverse effects). We found no randomised trials that evaluated the effectiveness of sleep positioning systems to reduce or prevent hip migration in children with cerebral palsy. Nor did we find any randomised trials that evaluated the effect of sleep positioning systems on the number or frequency of hip problems, quality of life of the child and family or on physical functioning.Limited data from two randomised trials, which evaluated the effectiveness of sleep positioning systems on sleep quality and pain for children with cerebral palsy, showed no significant differences in these aspects of health when children were using and not using a sleep positioning system.In order to inform clinical decision-making and the prescription of sleep positioning systems, more rigorous research is needed to determine effectiveness, cost-effectiveness, and the likelihood of adverse effects.

  3. [Study of continuous quality improvement for clinical laboratory processes via the platform of Hospital Group].

    PubMed

    Song, Wenqi; Shen, Ying; Peng, Xiaoxia; Tian, Jian; Wang, Hui; Xu, Lili; Nie, Xiaolu; Ni, Xin

    2015-05-26

    The program of continuous quality improvement in clinical laboratory processes for complete blood count (CBC) was launched via the platform of Beijing Children's Hospital Group in order to improve the quality of pediatric clinical laboratories. Fifteen children's hospitals of Beijing Children's Hospital group were investigated using the method of Chinese adapted continuous quality improvement with PDCA (Plan-Do-Check-Action). The questionnaire survey and inter-laboratory comparison was conducted to find the existing problems, to analyze reasons, to set forth quality targets and to put them into practice. Then, targeted training was conducted to 15 children's hospitals and the second questionnaire survey, self examinations by the clinical laboratories was performed. At the same time, the Group's online internal quality control platform was established. Overall effects of the program were evaluated so that lay a foundation for the next stage of PDCA. Both quality of control system documents and CBC internal quality control scheme for all of clinical laboratories were improved through this program. In addition, standardization of performance verification was also improved, especially with the comparable verification rate of precision and internal laboratory results up to 100%. In terms of instrument calibration and mandatory diagnostic rates, only three out of the 15 hospitals (20%) failed to pass muster in 2014 from 46.67% (seven out of the 15 hospitals) in 2013. The abnormal data of intraday precision variance coefficients of the five CBC indicator parameters (WBC, RBC, Hb, Plt and Hct) of all the 15 laboratories accounted for 1.2% (2/165) in 2014, a marked decrease from 9.6% (14/145) in 2013. While the number of the hospitals using only one horizontal quality control object for daily quality control has dropped to three from five. The 15 hospitals organized a total of 263 times of training in 2014 from 101 times in 2013, up 160%. The quality improvement program for the clinical laboratories launched via the Hospital Group platform can promote the joint development of the pediatric clinical laboratory discipline of all the member hospitals with remarkable improvement results, and the experience is recommendable for further rollout.

  4. 7 CFR 982.57 - Exemptions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... as do not interfere with the volume and quality control objectives of this part, and shall require... handled or used only as authorized. (b) Sales by growers direct to consumers. Any hazelnut grower may sell.... Mail order sales are not exempt sales under this part. [51 FR 29549, Aug. 19, 1986, as amended at 61 FR...

  5. Nonverbal Synchrony in Psychotherapy: Coordinated Body Movement Reflects Relationship Quality and Outcome

    ERIC Educational Resources Information Center

    Ramseyer, Fabian; Tschacher, Wolfgang

    2011-01-01

    Objective: The authors quantified nonverbal synchrony--the coordination of patient's and therapist's movement--in a random sample of same-sex psychotherapy dyads. The authors contrasted nonverbal synchrony in these dyads with a control condition and assessed its association with session-level and overall psychotherapy outcome. Method: Using an…

  6. Use of carbon fiber reinforced polymer (CFRP) with CFRP anchors for shear-strengthening and design recommendations/quality control procedures for CFRP anchors.

    DOT National Transportation Integrated Search

    2017-03-01

    The objective of the study was to demonstrate the feasibility of using bi-directional layouts of CFRP for shear : strengthening of bridge girders. In a previous project (0-6306), it was demonstrated that uni-directional CFRP : strips and CFRP anchors...

  7. Validation of Fusarium head blight resistance QTL using the NC-Neuse / Bess doubled haploid population

    USDA-ARS?s Scientific Manuscript database

    Fusarium Head Blight (FHB) is one of the most damaging diseases of wheat. It lowers the grain yield and quality, and contaminates grain with the mycotoxin deoxynivalenol (DON). Genetic resistance is a critical control measure and breeding objective. Many studies have focused on the genetic basis of ...

  8. Silviculture of the mahogany forest of Quintana Roo, Mexico: criteria and recommendations

    Treesearch

    P. ​​Negreros-Castillo; L. Camara-Cabrales; MS Devall; Mary Ann Fajvan; M.A. Mendoza Briseno; C.W. Mize; A. Navarro-Martinez

    2014-01-01

    Silviculture is the art, science and practice of controlling the establishment, composition, health, quality and growth of forests to accomplish a set of management objectives. This publication offers an approach to silviculture of the forests of Quintana Roo in which mahogany (Swietenia macrophylla King), the commercially most important tree...

  9. Using Live-Crown Ratio to Control Wood Quality: An Example of Quantitative Silviculture

    Treesearch

    Thomas J. Dean

    1999-01-01

    Quantitative silviculture is the application of biological relationships in meeting specific, quantitative management objectives. It is a two-sided approach requiring the identification and application of biological relationships. An example of quantitative silviculture is presented that uses a relationship between average-live crown ratio and relative stand density...

  10. Electroencephalography (EEG) Based Control in Assistive Mobile Robots: A Review

    NASA Astrophysics Data System (ADS)

    Krishnan, N. Murali; Mariappan, Muralindran; Muthukaruppan, Karthigayan; Hijazi, Mohd Hanafi Ahmad; Kitt, Wong Wei

    2016-03-01

    Recently, EEG based control in assistive robot usage has been gradually increasing in the area of biomedical field for giving quality and stress free life for disabled and elderly people. This study reviews the deployment of EGG based control in assistive robots, especially for those who in need and neurologically disabled. The main objective of this paper is to describe the methods used for (i) EEG data acquisition and signal preprocessing, (ii) feature extraction and (iii) signal classification methods. Besides that, this study presents the specific research challenges in the designing of these control systems and future research directions.

  11. Real-time control system for adaptive resonator

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Flath, L; An, J; Brase, J

    2000-07-24

    Sustained operation of high average power solid-state lasers currently requires an adaptive resonator to produce the optimal beam quality. We describe the architecture of a real-time adaptive control system for correcting intra-cavity aberrations in a heat capacity laser. Image data collected from a wavefront sensor are processed and used to control phase with a high-spatial-resolution deformable mirror. Our controller takes advantage of recent developments in low-cost, high-performance processor technology. A desktop-based computational engine and object-oriented software architecture replaces the high-cost rack-mount embedded computers of previous systems.

  12. Fatigue and Sleep Among Employees With Prospective Increase in Work Time Control: A 1-Year Observational Study With Objective Assessment.

    PubMed

    Kubo, Tomohide; Takahashi, Masaya; Liu, Xinxin; Ikeda, Hiroki; Togo, Fumiharu; Shimazu, Akihito; Tanaka, Katsutoshi; Kamata, Naoki; Kubo, Yoshiko; Uesugi, Junko

    2016-11-01

    This observational study aimed to determine how 1-year changes in work time control (WTC) have an impact upon objectively measured fatigue and sleep among employees. Thirty-nine employees were divided into two groups according to whether or not their WTC increased from baseline to 1 year later. Psychomotor vigilance task (PVT) and wrist actigraphy were used to objectively measure fatigue and sleep, respectively. Self-reported outcomes were also measured. The increased WTC group showed gradual improvements in PVT performance and sleep quality over the course of the follow-up period compared with the not-increased WTC group. Between-group differences were statistically significant for PVT lapses and tended to be significant for PVT speed after 1 year. A progressive increase in WTC could play a crucial role in reducing fatigue and promoting sleep among employees.

  13. Handling Ibuprofen Increases Pain Tolerance and Decreases Perceived Pain Intensity in a Cold Pressor Test

    PubMed Central

    Rutchick, Abraham M.; Slepian, Michael L.

    2013-01-01

    Pain contributes to health care costs, missed work and school, and lower quality of life. Extant research on psychological interventions for pain has focused primarily on developing skills that individuals can apply to manage their pain. Rather than examining internal factors that influence pain tolerance (e.g., pain management skills), the current work examines factors external to an individual that can increase pain tolerance. Specifically, the current study examined the nonconscious influence of exposure to meaningful objects on the perception of pain. Participants (N = 54) completed a cold pressor test, examined either ibuprofen or a control object, then completed another cold pressor test. In the second test, participants who previously examined ibuprofen reported experiencing less intense pain and tolerated immersion longer (relative to baseline) than those who examined the control object. Theoretical and applied implications of these findings are discussed. PMID:23469170

  14. A decision aid for intensity-modulated radiation-therapy plan selection in prostate cancer based on a prognostic Bayesian network and a Markov model.

    PubMed

    Smith, Wade P; Doctor, Jason; Meyer, Jürgen; Kalet, Ira J; Phillips, Mark H

    2009-06-01

    The prognosis of cancer patients treated with intensity-modulated radiation-therapy (IMRT) is inherently uncertain, depends on many decision variables, and requires that a physician balance competing objectives: maximum tumor control with minimal treatment complications. In order to better deal with the complex and multiple objective nature of the problem we have combined a prognostic probabilistic model with multi-attribute decision theory which incorporates patient preferences for outcomes. The response to IMRT for prostate cancer was modeled. A Bayesian network was used for prognosis for each treatment plan. Prognoses included predicting local tumor control, regional spread, distant metastases, and normal tissue complications resulting from treatment. A Markov model was constructed and used to calculate a quality-adjusted life-expectancy which aids in the multi-attribute decision process. Our method makes explicit the tradeoffs patients face between quality and quantity of life. This approach has advantages over current approaches because with our approach risks of health outcomes and patient preferences determine treatment decisions.

  15. Mindfulness Meditation Improves Mood, Quality of Life, and Attention in Adults with Attention Deficit Hyperactivity Disorder

    PubMed Central

    2015-01-01

    Objective. Adults with attention deficit hyperactivity disorder (ADHD) display affective problems and impaired attention. Mood in ADHD can be improved by mindful awareness practices (MAP), but results are mixed regarding the enhancement of attentional performance. Here we evaluated MAP-induced changes in quality of life (QoL), mood, and attention in adult ADHD patients and controls using more measures of attention than prior studies. Methods. Twenty-one ADHD patients and 8 healthy controls underwent 8 weekly MAP sessions; 22 similar patients and 9 controls did not undergo the intervention. Mood and QoL were assessed using validated questionnaires, and attention was evaluated using the Attentional Network Test (ANT) and the Conners Continuous Performance Test (CPT II), before and after intervention. Results. MAP enhanced sustained attention (ANT) and detectability (CPT II) and improved mood and QoL of patients and controls. Conclusion. MAP is a complementary intervention that improves affect and attention of adults with ADHD and controls. PMID:26137496

  16. Sleep quality, clinical and psychological manifestations in women with systemic lupus erythematosus.

    PubMed

    Moraleda, Virginia; Prados, Germán; Martínez, María P; Sánchez, Ana I; Sabio, José M; Miró, Elena

    2017-10-01

    Sleep problems are a common complaint in systemic lupus erythematosus (SLE) patients. We analyzed sleep quality with subjective and objective measures in a sample with SLE and its possible relationships with the main manifestations of the disease. Twenty-one women with SLE and 20 healthy women participated in the study. All participants were evaluated with actigraphy for a week and they completed self-report instruments of sleep quality, quality of life, fatigue, anxiety, depression and perceived stress. Comparison analyses between the two groups were done using Chi-square and Student's t-tests. The association between sleep quality and the remaining variables was explored using Pearson correlation coefficients. SLE patients had higher fragmentation index in the actigraphic analysis and a perception of poorer sleep quality, more fatigue, anxiety and depression than the control group. Bivariate analyses showed that the perception of more sleep disturbance and daytime dysfunction was associated with a lower health-related quality of life, more fatigue, emotional discomfort and more perceived stress. Also, the fragmentation index in the actigraphy was significantly related to the perception of poorer quality of sleep. SLE women had a poorer sleep quality (objective and subjective). These alterations could play a modulatory role in clinical and psychological manifestations of the disease and affect the quality of life in this population. More research is needed to clarify these relations and to determine the potential benefits of interventions directed to improve sleep in the clinical managing of the patients with SLE. © 2017 Asia Pacific League of Associations for Rheumatology and John Wiley & Sons Australia, Ltd.

  17. Direct energy balance based active disturbance rejection control for coal-fired power plant.

    PubMed

    Sun, Li; Hua, Qingsong; Li, Donghai; Pan, Lei; Xue, Yali; Lee, Kwang Y

    2017-09-01

    The conventional direct energy balance (DEB) based PI control can fulfill the fundamental tracking requirements of the coal-fired power plant. However, it is challenging to deal with the cases when the coal quality variation is present. To this end, this paper introduces the active disturbance rejection control (ADRC) to the DEB structure, where the coal quality variation is deemed as a kind of unknown disturbance that can be estimated and mitigated promptly. Firstly, the nonlinearity of a recent power plant model is analyzed based on the gap metric, which provides guidance on how to set the pressure set-point in line with the power demand. Secondly, the approximate decoupling effect of the DEB structure is analyzed based on the relative gain analysis in frequency domain. Finally, the synthesis of the DEB based ADRC control system is carried out based on multi-objective optimization. The optimized ADRC results show that the integrated absolute error (IAE) indices of the tracking performances in both loops can be simultaneously improved, in comparison with the DEB based PI control and H ∞ control system. The regulation performance in the presence of the coal quality variation is significantly improved under the ADRC control scheme. Moreover, the robustness of the proposed strategy is shown comparable with the H ∞ control. Copyright © 2017. Published by Elsevier Ltd.

  18. The quality of life among first-episode psychotic patients in the OPUS trial.

    PubMed

    Thorup, Anne; Petersen, Lone; Jeppesen, Pia; Nordentoft, Merete

    2010-01-01

    From an 'objective' perspective, treatment of first-episode psychosis has improved in many ways with the development of specialised early and intensive team-based treatment like e.g. the 'OPUS' treatment. However, the patients' perspective is also important and was investigated in the 'OPUS' study by analysing data concerning quality of life. We aimed to investigate the 'quality of life from patients' perspective' among a cohort of young adults with a first-episode psychosis at the time of treatment initiation and after two years. Especially, we were interested in analysing if there were any significant effects on the subjective quality of life of receiving an intensive psychosocial assertive community treatment called 'OPUS' compared to standard treatment (ST). This study is part of the Danish 'OPUS' trial, a randomised controlled trial (RCT) comparing 'treatment as usual' (standard treatment, ST) with 'OPUS' treatment. The Lancashire Quality of Life Profile (LQoLP), which is a combined objective and subjective instrument, was administered at baseline and after two years of treatment, N=280. The intensive 'OPUS' treatment did not affect the quality of life measured by Lancashire QoLP in a significantly different way from the standard treatment (ST). There were no significant differences in quality of life between the ST group and the OPUS group concerning the 9 life domains. Quality of life correlated with psychopathology (both psychotic and negative symptoms) to a minor extent and more strongly with the affective balance and level of self-esteem.

  19. Perceptual video quality assessment in H.264 video coding standard using objective modeling.

    PubMed

    Karthikeyan, Ramasamy; Sainarayanan, Gopalakrishnan; Deepa, Subramaniam Nachimuthu

    2014-01-01

    Since usage of digital video is wide spread nowadays, quality considerations have become essential, and industry demand for video quality measurement is rising. This proposal provides a method of perceptual quality assessment in H.264 standard encoder using objective modeling. For this purpose, quality impairments are calculated and a model is developed to compute the perceptual video quality metric based on no reference method. Because of the shuttle difference between the original video and the encoded video the quality of the encoded picture gets degraded, this quality difference is introduced by the encoding process like Intra and Inter prediction. The proposed model takes into account of the artifacts introduced by these spatial and temporal activities in the hybrid block based coding methods and an objective modeling of these artifacts into subjective quality estimation is proposed. The proposed model calculates the objective quality metric using subjective impairments; blockiness, blur and jerkiness compared to the existing bitrate only calculation defined in the ITU G 1070 model. The accuracy of the proposed perceptual video quality metrics is compared against popular full reference objective methods as defined by VQEG.

  20. Leg Movement Activity During Sleep in Adults With Attention-Deficit/Hyperactivity Disorder.

    PubMed

    Garbazza, Corrado; Sauter, Cornelia; Paul, Juliane; Kollek, Jenny; Dujardin, Catharine; Hackethal, Sandra; Dorn, Hans; Peter, Anita; Hansen, Marie-Luise; Manconi, Mauro; Ferri, Raffaele; Danker-Hopfe, Heidi

    2018-01-01

    Objectives: To conduct a first detailed analysis of the pattern of leg movement (LM) activity during sleep in adult subjects with Attention-Deficit/Hyperactivity Disorder (ADHD) compared to healthy controls. Methods: Fifteen ADHD patients and 18 control subjects underwent an in-lab polysomnographic sleep study. The periodic character of LMs was evaluated with established markers of "periodicity," i.e., the periodicity index, intermovement intervals, and time distribution of LM during sleep, in addition to standard parameters such as the periodic leg movement during sleep index (PLMSI) and the periodic leg movement during sleep arousal index (PLMSAI). Subjective sleep and psychiatric symptoms were assessed using several, self-administered, screening questionnaires. Results: Objective sleep parameters from the baseline night did not significantly differ between ADHD and control subjects, except for a longer sleep latency (SL), a longer duration of the periodic leg movements during sleep (PLMS) in REM sleep and a higher PLMSI also in REM sleep. Data from the sleep questionnaires showed perception of poor sleep quality in ADHD patients. Conclusions: Leg movements during sleep in ADHD adults are not significantly more frequent than in healthy controls and the nocturnal motor events do not show an increased periodicity in these patients. The non-periodic character of LMs in ADHD has already been shown in children and seems to differentiate ADHD from other pathophysiological related conditions like restless legs syndrome (RLS) or periodic limb movement disorder (PLMD). The reduced subjective sleep quality reported by ADHD adults contrasted with the normal objective polysomnographic parameters, which could suggest a sleep-state misperception in these individuals or more subtle sleep abnormalities not picked up by the traditional sleep staging.

  1. What is in a name? Comparing diagnostic criteria for chronic fatigue syndrome with or without fibromyalgia.

    PubMed

    Meeus, Mira; Ickmans, Kelly; Struyf, Filip; Kos, Daphne; Lambrecht, Luc; Willekens, Barbara; Cras, Patrick; Nijs, Jo

    2016-01-01

    The current study had two objectives. (1) to compare objective and self-report measures in patients with chronic fatigue syndrome (CFS) according to the 1994 Center for Disease Control (CDC) criteria, patients with multiple sclerosis (MS), and healthy controls, and (2) to contrast CFS patients who only fulfill CDC criteria to those who also fulfill the criteria for myalgic encephalomyelitis (ME), the 2003 Canadian criteria for ME/CFS, or the comorbid diagnosis of fibromyalgia (FM). One hundred six participants (48 CFS patients diagnosed following the 1994 CDC criteria, 19 MS patients, and 39 healthy controls) completed questionnaires assessing symptom severity, quality of life, daily functioning, and psychological factors. Objective measures consisted of activity monitoring, evaluation of maximal voluntary contraction and muscle recovery, and cognitive performance. CFS patients were screened whether they also fulfilled ME criteria, the Canadian criteria, and the diagnosis of FM. CFS patients scored higher on symptom severity, lower on quality of life, and higher on depression and kinesiophobia and worse on MVC, muscle recovery, and cognitive performance compared to the MS patients and the healthy subjects. Daily activity levels were also lower compared to healthy subjects. Only one difference was found between those fulfilling the ME criteria and those who did not regarding the degree of kinesiophobia (lower in ME), while comorbidity for FM significantly increased the symptom burden. CFS patients report more severe symptoms and are more disabled compared to MS patients and healthy controls. Based on the present study, fulfillment of the ME or Canadian criteria did not seem to give a clinically different picture, whereas a diagnosis of comorbid FM selected symptomatically worse and more disabled patients.

  2. Unmet Communication and Information Needs for Patients with IBD: Implications for Mobile Health Technology.

    PubMed

    Khan, Sameer; Dasrath, Florence; Farghaly, Sara; Otobo, Emamuzo; Riaz, Muhammad Safwan; Rogers, Jason; Castillo, Anabella; Atreja, Ashish

    2016-01-01

    In order to develop an application that addresses the most significant challenges facing IBD patients, this qualitative study explored the major hurdles of living with IBD, the information needs of IBD patients, and how application technology may be used to improve quality of life. 15 IBD patients participated in two focus groups of 120 minutes each. Data collection was achieved by combining focus groups with surveys and direct observation of patients looking at a patient-engaged app (HealthPROMISE) screenshots. The survey elicited information on demographics, health literacy and quality of life through the Short IBD Questionnaire (SIBDQ). The needs of IBD patients center around communication as it relates to both patient information needs and navigating the social impacts of IBD on patients' lives: Communication Challenges regarding Information Needs: Patients cited a doctor-patient communication divide where there is a continued lack of goal setting when discussing treatments and a lack of objectivity in disease control. When objectively compared with the SIBDQ, nearly half of the patients in the focus groups wrongly estimated their IBD control.Communication Challenges regarding Social Impacts of IBD: Patients strongly felt that while IBD disrupts routines, adds significant stress, and contributes to a sense of isolation, the impact of these issues would be significantly alleviated through more conversation and better support.Implication for Mobile Health Solutions: Patients want a tool that improves tracking of symptoms, medication adherence and provides education. Physician feedback to patient input on an application is required for long-term sustainability. IBD patients need mobile health technologies that evaluate disease control and the goals of care. Patients feel an objective assessment of their disease control, goal setting and physician feedback will greatly enhance utilization of all mobile health applications.

  3. Improving Pediatric Basic Life Support Performance Through Blended Learning With Web-Based Virtual Patients: Randomized Controlled Trial.

    PubMed

    Lehmann, Ronny; Thiessen, Christiane; Frick, Barbara; Bosse, Hans Martin; Nikendei, Christoph; Hoffmann, Georg Friedrich; Tönshoff, Burkhard; Huwendiek, Sören

    2015-07-02

    E-learning and blended learning approaches gain more and more popularity in emergency medicine curricula. So far, little data is available on the impact of such approaches on procedural learning and skill acquisition and their comparison with traditional approaches. This study investigated the impact of a blended learning approach, including Web-based virtual patients (VPs) and standard pediatric basic life support (PBLS) training, on procedural knowledge, objective performance, and self-assessment. A total of 57 medical students were randomly assigned to an intervention group (n=30) and a control group (n=27). Both groups received paper handouts in preparation of simulation-based PBLS training. The intervention group additionally completed two Web-based VPs with embedded video clips. Measurements were taken at randomization (t0), after the preparation period (t1), and after hands-on training (t2). Clinical decision-making skills and procedural knowledge were assessed at t0 and t1. PBLS performance was scored regarding adherence to the correct algorithm, conformance to temporal demands, and the quality of procedural steps at t1 and t2. Participants' self-assessments were recorded in all three measurements. Procedural knowledge of the intervention group was significantly superior to that of the control group at t1. At t2, the intervention group showed significantly better adherence to the algorithm and temporal demands, and better procedural quality of PBLS in objective measures than did the control group. These aspects differed between the groups even at t1 (after VPs, prior to practical training). Self-assessments differed significantly only at t1 in favor of the intervention group. Training with VPs combined with hands-on training improves PBLS performance as judged by objective measures.

  4. Physical activity interventions for people with mental illness: a systematic review and meta-analysis.

    PubMed

    Rosenbaum, Simon; Tiedemann, Anne; Sherrington, Catherine; Curtis, Jackie; Ward, Philip B

    2014-09-01

    To determine effects of physical activity on depressive symptoms (primary objective), symptoms of schizophrenia, anthropometric measures, aerobic capacity, and quality of life (secondary objectives) in people with mental illness and explore between-study heterogeneity. MEDLINE, Cochrane Controlled Trials Register, PsycINFO, CINAHL, Embase, and the Physiotherapy Evidence Database (PEDro) were searched from earliest record to 2013. Randomized controlled trials of adults with a DSM-IV-TR, ICD-10, or clinician-confirmed diagnosis of a mental illness other than dysthymia or eating disorders were selected. Interventions included exercise programs, exercise counseling, lifestyle interventions, tai chi, or physical yoga. Study methodological quality and intervention compliance with American College of Sports Medicine (ACSM) guidelines were also assessed. Two investigators extracted data. Data were pooled using random-effects meta-analysis. Meta-regression was used to examine sources of between-study heterogeneity. Thirty-nine eligible trials were identified. The primary meta-analysis found a large effect of physical activity on depressive symptoms (n = 20; standardized mean difference (SMD) = 0.80). The effect size in trial interventions that met ACSM guidelines for aerobic exercise did not differ significantly from those that did not meet these guidelines. The effect for trials with higher methodological quality was smaller than that observed for trials with lower methodological quality (SMD = 0.39 vs 1.35); however, the difference was not statistically significant. A large effect was found for schizophrenia symptoms (SMD = 1.0), a small effect was found for anthropometry (SMD = 0.24), and moderate effects were found for aerobic capacity (SMD = 0.63) and quality of life (SMD = 0.64). Physical activity reduced depressive symptoms in people with mental illness. Larger effects were seen in studies of poorer methodological quality. Physical activity reduced symptoms of schizophrenia and improved anthropometric measures, aerobic capacity, and quality of life among people with mental illness. PROSPERO registration #CRD42012002012. © Copyright 2014 Physicians Postgraduate Press, Inc.

  5. Sleep-Disordered Breathing in Chronic SCI: A Randomized Controlled Trial of Treatment Impact on Cognition, Quality of Life, and Cardiovascular Disease

    DTIC Science & Technology

    2014-10-01

    SCI. In this prospective randomized controlled trial, we will objectively measure sleep disordered breathing ( SDB ) in chronic SCI patients using...portable sleep studies, and systematically evaluate the association between SDB , cognitive performance, mood, pain, and CV measures. We will randomize...randomized shortly. 15. SUBJECT TERMS SDB , SCI, PAP, CV 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a

  6. Socioeconomic, Family, and Pediatric Practice Factors Affecting the Level of Asthma Control

    PubMed Central

    Bloomberg, Gordon R; Banister, Christina; Sterkel, Randall; Epstein, Jay; Bruns, Julie; Swerczek, Lisa; Wells, Suzanne; Yan, Yan; Garbutt, Jane M

    2008-01-01

    Background Multiple issues bear on effective control of childhood asthma. Objective To identify factors related to the level of asthma control in children receiving asthma care from community pediatricians. Patients and Methods Data for 362 children participating in an intervention study to reduce asthma morbidity were collected by telephone administered questionnaire. Level of asthma control (“well controlled,” partially controlled,” or “poorly controlled”) was derived from measures of recent impairment (symptoms, activity limitations, albuterol use) and the number of exacerbations in a 12 month period. Data also included demographic characteristics, asthma-related quality of life, pediatric management practices, and medication usage. Univariable and multivariable analyses were used to identify factors associated with poor asthma control and to explore the relationship between control and use of daily controller medications. Results Asthma was “well controlled” for 24% of children, “partially controlled” for 20%, and “poorly controlled” for 56%. Medicaid insurance (p=0.016), the presence of another family member with asthma (p=0.0168), and outside the home maternal employment, (p=0.025), were significant univariable factors associated with poor asthma control. Medicaid insurance had an independent association with poor control (OR 0.49, 95% CI 0.28-0.9). Seventy-six percent of children were reported by parents as receiving a daily controller medication. Comparison of guidelines recommended controller medication with level of control indicated that a higher step level of medication would have been appropriate for 74% of these children. Significantly lower overall quality of life scores were observed in both parents and children with poor control. (ANOVA, p<0.05) Conclusion Despite substantial use of daily controller medication, children with asthma continue to experience poorly controlled asthma and reduced quality of life. While Medicaid insurance and aspects of family structure are significant factors associated with poorly controlled asthma, attention to medication use and quality of life indicators may further reduce morbidity. PMID:19255010

  7. Optical quality in central serous chorioretinopathy.

    PubMed

    Lee, Kyungmin; Sohn, Joonhong; Choi, Jong Gil; Chung, Sung Kun

    2014-12-02

    To assess optical quality and intraocular scattering using the Optical Quality Analysis System (OQAS) in central serous chorioretinopathy (CSC) and to determine the effects of retinal changes on optical quality. This was a prospective, case-control study. Participants were 29 patients with diagnosis of CSC. The control group consisted of the patients' unaffected eyes. Initial logMAR visual acuity, central macular thickness (by spectral domain optical coherence tomography), and optical quality parameters including modulation transfer function (MTF) cutoff frequency, Strehl (2-dimensional) ratio, and OQAS values at 100%, 20%, and 9% contrast levels were investigated. Objective scattering index (OSI) at 4.0-mm pupil size was assessed in both eyes by using the OQAS. After 3 months of treatment, which included observation and focal laser or injections of antivascular endothelial growth factor, every CSC-affected eye was followed. Main outcome measures were differences between clinical parameters of the CSC-affected eye and those of the control eye and changes in those parameters according to the clinical course of CSC over 3 months. In CSC-affected eyes, the MTF cutoff was significantly reduced (P = 0.01), and OSI was significantly increased (P = 0.03). As macular thickness decreased, OSI decreased but did not become normalized compared to the control eye, nor was it statistically significantly correlated with central macular thickness change. Retinal change affected optical quality and intraocular scatter. Therefore, when the severity of a cataract is assessed using the OQAS, retinal status should be considered when interpreting OQAS values. Copyright 2014 The Association for Research in Vision and Ophthalmology, Inc.

  8. Flight simulator for hypersonic vehicle and a study of NASP handling qualities

    NASA Technical Reports Server (NTRS)

    Ntuen, Celestine A.; Park, Eui H.; Deeb, Joseph M.; Kim, Jung H.

    1992-01-01

    The research goal of the Human-Machine Systems Engineering Group was to study the existing handling quality studies in aircraft with sonic to supersonic speeds and power in order to understand information requirements needed for a hypersonic vehicle flight simulator. This goal falls within the NASA task statements: (1) develop flight simulator for hypersonic vehicle; (2) study NASP handling qualities; and (3) study effects of flexibility on handling qualities and on control system performance. Following the above statement of work, the group has developed three research strategies. These are: (1) to study existing handling quality studies and the associated aircraft and develop flight simulation data characterization; (2) to develop a profile for flight simulation data acquisition based on objective statement no. 1 above; and (3) to develop a simulator and an embedded expert system platform which can be used in handling quality experiments for hypersonic aircraft/flight simulation training.

  9. Control method of Three-phase Four-leg converter based on repetitive control

    NASA Astrophysics Data System (ADS)

    Hui, Wang

    2018-03-01

    The research chose the magnetic levitation force of wind power generation system as the object. In order to improve the power quality problem caused by unbalanced load in power supply system, we combined the characteristics and repetitive control principle of magnetic levitation wind power generation system, and then an independent control strategy for three-phase four-leg converter was proposed. In this paper, based on the symmetric component method, the second order generalized integrator was used to generate the positive and negative sequence of signals, and the decoupling control was carried out under the synchronous rotating reference frame, in which the positive and negative sequence voltage is PI double closed loop, and a PI regulator with repetitive control was introduced to eliminate the static error regarding the fundamental frequency fluctuation characteristic of zero sequence component. The simulation results based on Matlab/Simulink show that the proposed control project can effectively suppress the disturbance caused by unbalanced loads and maintain the load voltage balance. The project is easy to be achieved and remarkably improves the quality of the independent power supply system.

  10. Diabetes Risk and Disease Management in Later Life: A National Longitudinal Study of the Role of Marital Quality

    PubMed Central

    Waite, Linda; Shen, Shannon

    2016-01-01

    Objectives: We assess the association between marital quality and both the risk of developing diabetes and the management of diabetes after its onset in later life. Method: We use data from the first two waves of the National Social Life, Health, and Aging Project to estimate regression models with lagged dependent variables. The sample includes 1,228 married respondents, among whom 389 were diabetic. Those with either a reported diagnosis or with HbA1c ≥ 6.5% are identified diabetic. We categorize diabetic respondents into three groups: controlled, undiagnosed, and uncontrolled diabetes. We conduct factor analysis to construct positive and negative marital quality scales. Results: For women, an increase in positive marital quality between Waves 1 and 2 is related to a lower risk of being diabetic at Wave 2, net of diabetes status at Wave 1; surprisingly, for men, an increase in negative marital quality between Waves 1 and 2 is related to both a lower risk of being diabetic at Wave 2 and a higher chance of controlling diabetes at Wave 2 after its onset. Discussion: Our results challenge the traditional assumption that negative marital quality is always detrimental to health and encourage family scholars to distinguish different sources and types of negative marital quality. PMID:27216861

  11. Tic Related Activity Restriction as a Predictor of Emotional Functioning and Quality of Life

    PubMed Central

    Conelea, Christine A.; Busch, Andrew M.; Catanzaro, Mark A.; Budman, Cathy L.

    2013-01-01

    Objectives Tourette Syndrome (TS) is a chronic neuropsychiatric condition that frequently persists into adulthood. Existing research has identified demographic and symptom-level variables associated with psychopathology and poor quality of life in TS. However, behavior patterns associated with enhanced or adaptive psychological and global functioning among adults with TS have yet to be empirically identified. The current study examined whether tic-specific activity restriction is related to emotional functioning and quality of life in adults with TS. Methods Participants were 509 adults from the Tourette Syndrome Impact Survey who completed self-report measures of demographics, tic severity, emotional functioning, quality of life, and tic related general and social activity restriction. Results Partial correlations controlling for tic severity indicated that tic related general and social activity restriction were significantly correlated with lower quality of life and poorer emotional functioning. Hierarchical linear regression models indicated that activity restriction significantly predicted lower quality of life and poorer emotional functioning when controlling for tic severity and demographic variables. Conclusions Adults who restrict fewer activities due to tics, regardless of tic severity, experience greater quality of life and better emotional functioning. Clinically, adults with chronic tics may benefit from interventions focused on enhancing engagement in valued life activities. PMID:24156871

  12. Effect of Cognitive Behavioral Therapy for Anxiety Disorders on Quality of Life: A Meta-Analysis

    PubMed Central

    Hofmann, Stefan G.; Wu, Jade Q.; Boettcher, Hannah

    2014-01-01

    OBJECTIVE Although cognitive-behavioral therapy is effective for treating anxiety disorders, little is known about its effect on quality of life. To conduct a meta-analysis of cognitive-behavioral therapy for anxiety disorders on quality of life, we searched for relevant studies in PubMed, PsycINFO and the Cochrane Library, and conducted manual searches. METHOD The search identified 44 studies that included 59 CBT trials, totaling 3,326 participants receiving cognitive-behavioral therapy for anxiety disorders. We estimated the controlled and within-group random effects of the treatment changes on quality of life. RESULTS The pre-post within-group and controlled effect sizes were moderately strong, Hedges’ g = 0.54 and Hedges’ g = 0.56, respectively. Improvements were greater for physical and psychological domains of quality of life than for environmental and social domains. The overall effect sizes decreased with publication year and increased with treatment duration. Face-to-face treatments delivered individually and in groups produced significantly higher effect sizes than internet-delivered treatments. CONCLUSION Cognitive-behavioral therapy for anxiety disorders is moderately effective for improving quality of life, especially in physical and psychological domains. Internet-delivered treatments are less effective in improving quality of life than face-to-face treatments. PMID:24447006

  13. [Phantom studies of ultrasound equipment for quality improvement in breast diagnosis].

    PubMed

    Madjar, H; Mundinger, A; Lattermann, U; Gufler, H; Prömpeler, H J

    1996-04-01

    According to the German guidelines for quality control of ultrasonic equipment, the following conditions are required for breast ultrasound: A transducer frequency between 5-7.5 MHz and a minimum field of view of 5 cm. Satisfactory images must be obtained in a depth between 0.5 and 4 cm with a wide tolerance of the focal zones. This allows the use of poor quality equipment which does not produce satisfactory image quality and it excludes a number of high frequency and high resolution transducers with a field of view below 5 cm. This study with a test phantom was performed to define image quality objectively. Sixteen ultrasound instruments in different price categories were used to perform standardized examinations on a breast phantom model 550 (ATS Laboratories, Bridgeport, USA). Contrast and spatial resolution in different penetration depths were investigated on cyst phantoms from 1-4 mm diameter and wire targets with defined distances between 0.5-3 mm 4 investigations reported the images. A positive correlation was seen between price category and image quality. This study demonstrates that transducer frequency and image geometry do not allow sufficient quality control. An improvement of ultrasound diagnosis is only possible if equipment guidelines are based on standard examinations with test phantoms.

  14. Do Psychosocial Interventions Improve Quality of Life and Wellbeing in Adults with Neuromuscular Disorders? A Systematic Review and Narrative Synthesis.

    PubMed

    Walklet, Elaine; Muse, Kate; Meyrick, Jane; Moss, Tim

    2016-08-30

    Quality of life and well-being are frequently restricted in adults with neuromuscular disorders. As such, identification of appropriate interventions is imperative. The objective of this paper was to systematically review and critically appraise quantitative studies (RCTs, controlled trials and cohort studies) of psychosocial interventions designed to improve quality of life and well-being in adults with neuromuscular disorders. A systematic review of the published and unpublished literature was conducted. Studies meeting inclusion criteria were appraised using a validated quality assessment tool and results presented in a narrative synthesis. Out of 3,136 studies identified, ten studies met criteria for inclusion within the review. Included studies comprised a range of interventions including: cognitive behavioural therapy, dignity therapy, hypnosis, expressive disclosure, gratitude lists, group psychoeducation and psychologically informed rehabilitation. Five of the interventions were for patients with Amyotrophic Lateral Sclerosis (ALS). The remainder were for patients with post-polio syndrome, muscular dystrophies and mixed disorders, such as Charcot-Marie-Tooth disease, myasthenia gravis and myotonic dystrophy. Across varied interventions and neuromuscular disorders, seven studies reported a short-term beneficial effect of intervention on quality of life and well-being. Whilst such findings are encouraging, widespread issues with the methodological quality of these studies significantly compromised the results. There is no strong evidence that psychosocial interventions improve quality of life and well-being in adults with neuromuscular disorders, due to a paucity of high quality research in this field. Multi-site, randomised controlled trials with active controls, standardised outcome measurement and longer term follow-ups are urgently required.

  15. Sigma metrics used to assess analytical quality of clinical chemistry assays: importance of the allowable total error (TEa) target.

    PubMed

    Hens, Koen; Berth, Mario; Armbruster, Dave; Westgard, Sten

    2014-07-01

    Six Sigma metrics were used to assess the analytical quality of automated clinical chemistry and immunoassay tests in a large Belgian clinical laboratory and to explore the importance of the source used for estimation of the allowable total error. Clinical laboratories are continually challenged to maintain analytical quality. However, it is difficult to measure assay quality objectively and quantitatively. The Sigma metric is a single number that estimates quality based on the traditional parameters used in the clinical laboratory: allowable total error (TEa), precision and bias. In this study, Sigma metrics were calculated for 41 clinical chemistry assays for serum and urine on five ARCHITECT c16000 chemistry analyzers. Controls at two analyte concentrations were tested and Sigma metrics were calculated using three different TEa targets (Ricos biological variability, CLIA, and RiliBÄK). Sigma metrics varied with analyte concentration, the TEa target, and between/among analyzers. Sigma values identified those assays that are analytically robust and require minimal quality control rules and those that exhibit more variability and require more complex rules. The analyzer to analyzer variability was assessed on the basis of Sigma metrics. Six Sigma is a more efficient way to control quality, but the lack of TEa targets for many analytes and the sometimes inconsistent TEa targets from different sources are important variables for the interpretation and the application of Sigma metrics in a routine clinical laboratory. Sigma metrics are a valuable means of comparing the analytical quality of two or more analyzers to ensure the comparability of patient test results.

  16. Do Psychosocial Interventions Improve Quality of Life and Wellbeing in Adults with Neuromuscular Disorders? A Systematic Review and Narrative Synthesis

    PubMed Central

    Walklet, Elaine; Muse, Kate; Meyrick, Jane; Moss, Tim

    2016-01-01

    Quality of life and well-being are frequently restricted in adults with neuromuscular disorders. As such, identification of appropriate interventions is imperative. The objective of this paper was to systematically review and critically appraise quantitative studies (RCTs, controlled trials and cohort studies) of psychosocial interventions designed to improve quality of life and well-being in adults with neuromuscular disorders. A systematic review of the published and unpublished literature was conducted. Studies meeting inclusion criteria were appraised using a validated quality assessment tool and results presented in a narrative synthesis. Out of 3,136 studies identified, ten studies met criteria for inclusion within the review. Included studies comprised a range of interventions including: cognitive behavioural therapy, dignity therapy, hypnosis, expressive disclosure, gratitude lists, group psychoeducation and psychologically informed rehabilitation. Five of the interventions were for patients with Amyotrophic Lateral Sclerosis (ALS). The remainder were for patients with post-polio syndrome, muscular dystrophies and mixed disorders, such as Charcot-Marie-Tooth disease, myasthenia gravis and myotonic dystrophy. Across varied interventions and neuromuscular disorders, seven studies reported a short-term beneficial effect of intervention on quality of life and well-being. Whilst such findings are encouraging, widespread issues with the methodological quality of these studies significantly compromised the results. There is no strong evidence that psychosocial interventions improve quality of life and well-being in adults with neuromuscular disorders, due to a paucity of high quality research in this field. Multi-site, randomised controlled trials with active controls, standardised outcome measurement and longer term follow-ups are urgently required. PMID:27854227

  17. Impact of the Mobile HealthPROMISE Platform on the Quality of Care and Quality of Life in Patients With Inflammatory Bowel Disease: Study Protocol of a Pragmatic Randomized Controlled Trial

    PubMed Central

    Khan, Sameer; Rogers, Jason D; Otobo, Emamuzo; Patel, Nishant P; Ullman, Thomas; Colombel, Jean Fred; Moore, Shirley; Sands, Bruce E

    2015-01-01

    Background Inflammatory bowel disease (IBD) is a chronic condition of the bowel that affects over 1 million people in the United States. The recurring nature of disease makes IBD patients ideal candidates for patient-engaged care that is centered on enhanced self-management and improved doctor-patient communication. In IBD, optimal approaches to management vary for patients with different phenotypes and extent of disease and past surgical history. Hence, a single quality metric cannot define a heterogeneous disease such as IBD, unlike hypertension and diabetes. A more comprehensive assessment may be provided by complementing traditional quality metrics with measures of the patient’s quality of life (QOL) through an application like HealthPROMISE. Objective The objective of this pragmatic randomized controlled trial is to determine the impact of the HealthPROMISE app in improving outcomes (quality of care [QOC], QOL, patient adherence, disease control, and resource utilization) as compared to a patient education app. Our hypothesis is that a patient-centric self-monitoring and collaborative decision support platform will lead to sustainable improvement in overall QOL for IBD patients. Methods Participants will be recruited during face-to-face visits and randomized to either an interventional (ie, HealthPROMISE) or control (ie, education app). Patients in the HealthPROMISE arm will be able to update their information and receive disease summary, quality metrics, and a graph showing the trend of QOL (SIBDQ) scores and resource utilization over time. Providers will use the data for collaborative decision making and quality improvement interventions at the point of care. Patients in the control arm will enter data at baseline, during office visits, and at the end of the study but will not receive any decision support (trend of QOL, alert, or dashboard views). Results Enrollment in the trial will be starting in first quarter of 2015. It is intended that up to 300 patients with IBD will be recruited into the study (with 1:1 allocation ratio). The primary endpoint is number of quality indicators met in HealthPROMISE versus control arm. Secondary endpoints include decrease in number of emergency visits due to IBD, decrease in number of hospitalization due to IBD, change in generic QOL score from baseline, proportion of patients in each group who meet all eligible outpatient quality metrics, and proportion of patients in disease control in each group. In addition, we plan to conduct protocol analysis of intervention patients with adequate HealthPROMISE utilization (more than 6 log-ins with data entry from week 0 through week 52) achieving above mentioned primary and secondary endpoints. Conclusions HealthPROMISE is a unique cloud-based patient-reported outcome (PRO) and decision support tool that empowers both patients and providers. Patients track their QOL and symptoms, and providers can use the visual data in real time (integrated with electronic health records [EHRs]) to provide better care to their entire patient population. Using pragmatic trial design, we hope to show that IBD patients who participate in their own care and share in decision making have appreciably improved outcomes when compared to patients who do not. Trial Registration ClinicalTrials.gov NCT02322307; https://clinicaltrials.gov/ct2/show/NCT02322307 (Archived by WebCite at http://www.webcitation.org/6W8PoYThr). PMID:25693610

  18. Hyposalivation and xerostomia among Parkinson's disease patients and its impact on quality of life.

    PubMed

    Barbe, A G; Heinzler, A; Derman, Shm; Hellmich, M; Timmermann, L; Noack, M J

    2017-05-01

    Parkinson's disease (PD) adversely affects oral health (OH). However, the informative value of xerostomia compared to objective parameters and its impact on quality of life (QoL) are still unclear. This study aimed to explore whether xerostomia correlates with hyposalivation and to define its impact on OH-related QoL. Whole stimulated saliva (WSS) was collected from 30 patients with PD and 30 matched healthy controls. Objective parameters (community periodontal index of treatment needs, plaque/gingivitis index, mucosa situation and cheilitis angularis) and questionnaires (German Oral Health Impact Profile [OHIPG]-14, visual analogue scale [VAS], xerostomia [yes/no] and the Unified Parkinson's Disease Rating Scale-II) were assessed. Eighty-seven per cent of patients with PD showed hyposalivation vs 50% of controls (P = 0.001); 50% of patients with PD reported xerostomia, and none of controls (P < 0.001). The OHIPG-14 was impaired in patients with PD compared to controls (P < 0.001), PD patients with xerostomia reported mean VAS values of 4.1 (s.d.: 2.2). WSS did not correlate with VAS values. Half of the patients with PD reported xerostomia and underestimated their xerostomic status, with higher probability than healthy controls. WSS did not reflect the grade of xerostomia. Patients with PD suffered from impaired OH-related QoL. Dental teams should not overlook these oral health risks. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  19. Measuring, managing and maximizing refinery performance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bascur, O.A.; Kennedy, J.P.

    1996-01-01

    Implementing continuous quality improvement is a confluence of total quality management, people empowerment, performance indicators and information engineering. Supporting information technologies allow a refiner to narrow the gap between management objectives and the process control level. Dynamic performance monitoring benefits come from production cost savings, improved communications and enhanced decision making. A refinery workgroup information flow model helps automate continuous improvement of processes, performance and the organization. The paper discusses the rethinking of refinery operations, dynamic performance monitoring, continuous process improvement, the knowledge coordinator and repository manager, an integrated plant operations workflow, and successful implementation.

  20. Water quality program elements for Space Station Freedom

    NASA Technical Reports Server (NTRS)

    Sauer, Richard L.; Ramanathan, Raghupathy; Straub, John E.; Schultz, John R.

    1991-01-01

    A strategy is outlined for the development of water-quality criteria and standards relevant to recycling and monitoring the in-flight water for the Space Station Freedom (SSF). The water-reclamation subsystem of the SSF's ECLSS is described, and the objectives of the water-quality are set forth with attention to contaminants. Quality parameters are listed for potable and hygiene-related water including physical and organic parameters, inorganic constituents, bactericides, and microbial content. Comparisons are made to the quality parameters established for the Shuttle's potable water and to the EPA's current standards. Specific research is required to develop in-flight monitoring techniques for unique SSF contaminants, ECLSS microbial control, and on- and off-line monitoring. After discussing some of the in-flight water-monitoring hardware it is concluded that water reclamation and recycling are necessary and feasible for the SSF.

  1. Improve strategic supplier performance using DMAIC to develop a Quality Improvement Plan

    NASA Astrophysics Data System (ADS)

    Jardim, Kevin P.

    Supplier performance that meets the requirements of the customer has long plagued quality professionals. Despite the vast efforts by organizations to improve supplier performance, little has been done to standardize the plan to improve performance. This project presents a guideline and problem-solving strategy using a Define, Measure, Analyze, Improve, and Control (DMAIC) structured tool that will assist in the management and improvement of supplier performance. An analysis of benchmarked Quality Improvement Plans indicated that this topic needs more focus on how to accomplish improved supplier performance. This project is part of a growing body of supplier continuous improvement efforts. With the input of Zodiac Aerospace quality professionals this project's results provide a solution to Quality Improvement Plans and show objective evidence of its benefits. This project contributes to the future research on similar topics.

  2. Water quality data for selected wells in the Coastal Plain of New Jersey, 1996-98

    USGS Publications Warehouse

    Hibbs, Kathleen L.; Stackelberg, Paul E.; Kauffman, Leon J.; Ayers, Mark A.

    2001-01-01

    Water-quality data were collected during 1996-98 for 217 wells in New Jersey and 3 wells in New York as part of the U. S. Geological Survey's National Water Quality Assessment Program. Samples were collected for five ground-water surveys that were designed to assess water quality in major aquifer systems, with an emphasis on recently recharged (shallow) ground water associated with present and recent human activities. This report (1) summarizes the hydrogeologic framework in the areas of data collection; (2) describes the objectives and procedures for designing each ground-water survey; (3) summarizes the procedures and protocols for data collec-tion, analysis, and quality control; and (4) lists the concentrations of inorganic constituents, volatile organic compounds, pesticides, nutrients, and trace elements present in the ground-water samples.

  3. Hoshin Kanri: a technique for strategic quality management.

    PubMed

    Tennant, C; Roberts, P A

    2000-01-01

    This paper describes a technique for Strategic Quality Management (SQM), known as Hoshin Kanri, which has been operated as a management system in many Japanese companies since the 1960s. It represents a core aspect of Japanese companies' management systems, and is stated as: the means by which the overall control system and Total Quality Management (TQM) are deployed. Hoshin Kanri is not particularly unique in its concept of establishing and tracking individual goals and objectives, but the manner in which the objectives and the means to achieve them are developed and deployed is. The problem with applying the concept of Strategic Quality Management (SQM) using Hoshin Kanri, is that it can tend to challenge the traditional authoritarian strategic planning models, which have become the paradigms of modern business. Yet Hoshin Kanri provides an appropriate tool for declaration of the strategic vision for the business while integrating goals and targets in a single holistic model. There have been various adaptations of Hoshin Kanri to align the technique to Western thinking and management approaches, yet outside Japan its significance has gone largely unreported. It is proposed that Hoshin Kanri is an effective methodology for SQM, which has a number of benefits over the more conventional planning techniques. The benefits of Hoshin Kanri as a tool for Strategic Quality Management (SQM) compared to conventional planning systems include: integration of strategic objectives with tactical daily management, the application of the plan-do-check-act cycle to business process management, parallel planning and execution methodology, company wide approach, improvements in communication, increased consensus and buy-in to goal setting, and cross-functional-management integration.

  4. Improved statistical method for temperature and salinity quality control

    NASA Astrophysics Data System (ADS)

    Gourrion, Jérôme; Szekely, Tanguy

    2017-04-01

    Climate research and Ocean monitoring benefit from the continuous development of global in-situ hydrographic networks in the last decades. Apart from the increasing volume of observations available on a large range of temporal and spatial scales, a critical aspect concerns the ability to constantly improve the quality of the datasets. In the context of the Coriolis Dataset for ReAnalysis (CORA) version 4.2, a new quality control method based on a local comparison to historical extreme values ever observed is developed, implemented and validated. Temperature, salinity and potential density validity intervals are directly estimated from minimum and maximum values from an historical reference dataset, rather than from traditional mean and standard deviation estimates. Such an approach avoids strong statistical assumptions on the data distributions such as unimodality, absence of skewness and spatially homogeneous kurtosis. As a new feature, it also allows addressing simultaneously the two main objectives of an automatic quality control strategy, i.e. maximizing the number of good detections while minimizing the number of false alarms. The reference dataset is presently built from the fusion of 1) all ARGO profiles up to late 2015, 2) 3 historical CTD datasets and 3) the Sea Mammals CTD profiles from the MEOP database. All datasets are extensively and manually quality controlled. In this communication, the latest method validation results are also presented. The method has already been implemented in the latest version of the delayed-time CMEMS in-situ dataset and will be deployed soon in the equivalent near-real time products.

  5. Improved Statistical Method For Hydrographic Climatic Records Quality Control

    NASA Astrophysics Data System (ADS)

    Gourrion, J.; Szekely, T.

    2016-02-01

    Climate research benefits from the continuous development of global in-situ hydrographic networks in the last decades. Apart from the increasing volume of observations available on a large range of temporal and spatial scales, a critical aspect concerns the ability to constantly improve the quality of the datasets. In the context of the Coriolis Dataset for ReAnalysis (CORA) version 4.2, a new quality control method based on a local comparison to historical extreme values ever observed is developed, implemented and validated. Temperature, salinity and potential density validity intervals are directly estimated from minimum and maximum values from an historical reference dataset, rather than from traditional mean and standard deviation estimates. Such an approach avoids strong statistical assumptions on the data distributions such as unimodality, absence of skewness and spatially homogeneous kurtosis. As a new feature, it also allows addressing simultaneously the two main objectives of a quality control strategy, i.e. maximizing the number of good detections while minimizing the number of false alarms. The reference dataset is presently built from the fusion of 1) all ARGO profiles up to early 2014, 2) 3 historical CTD datasets and 3) the Sea Mammals CTD profiles from the MEOP database. All datasets are extensively and manually quality controlled. In this communication, the latest method validation results are also presented. The method has been implemented in the latest version of the CORA dataset and will benefit to the next version of the Copernicus CMEMS dataset.

  6. Design of the data quality control system for the ALICE O2

    NASA Astrophysics Data System (ADS)

    von Haller, Barthélémy; Lesiak, Patryk; Otwinowski, Jacek; ALICE Collaboration

    2017-10-01

    ALICE (A Large Ion Collider Experiment) is the heavy-ion detector designed to study the physics of strongly interacting matter and the quark-gluon plasma at the CERN Large Hadron Collider (LHC). A major upgrade of the experiment is planned for 2019-20. In order to cope with a 100 times higher data rate and with the continuous readout of the Time Projection Chamber (TPC), it is necessary to upgrade the Online and Offline computing to a new common system called O2. The online Data Quality Monitoring (DQM) and the offline Quality Assurance (QA) are critical aspects of the data acquisition and reconstruction software chains. The former intends to provide shifters with precise and complete information in order to quickly identify and overcome problems while the latter aims at providing good quality data for physics analyses. DQM and QA typically involve the gathering of data, its distributed analysis by user-defined algorithms, the merging of the resulting objects and their visualization. This paper discusses the architecture and the design of the data Quality Control system that regroups the DQM and QA. In addition it presents the main design requirements and early results of a working prototype. A special focus is put on the merging of monitoring objects generated by the QC tasks. The merging is a crucial and challenging step of the O2 system, not only for QC but also for the calibration. Various scenarios and implementations have been made and large-scale tests carried out. This document presents the final results of this extensive work on merging. We conclude with the plan of work for the coming years that will bring the QC to production by 2019.

  7. Conjunctively optimizing flash flood control and water quality in urban water reservoirs by model predictive control and dynamic emulation

    NASA Astrophysics Data System (ADS)

    Galelli, Stefano; Goedbloed, Albert; Schmitter, Petra; Castelletti, Andrea

    2014-05-01

    Urban water reservoirs are a viable adaptation option to account for increasing drinking water demand of urbanized areas as they allow storage and re-use of water that is normally lost. In addition, the direct availability of freshwater reduces pumping costs and diversifies the portfolios of drinking water supply. Yet, these benefits have an associated twofold cost. Firstly, the presence of large, impervious areas increases the hydraulic efficiency of urban catchments, with short time of concentration, increased runoff rates, losses of infiltration and baseflow, and higher risk of flash floods. Secondly, the high concentration of nutrients and sediments characterizing urban discharges is likely to cause water quality problems. In this study we propose a new control scheme combining Model Predictive Control (MPC), hydro-meteorological forecasts and dynamic model emulation to design real-time operating policies that conjunctively optimize water quantity and quality targets. The main advantage of this scheme stands in its capability of exploiting real-time hydro-meteorological forecasts, which are crucial in such fast-varying systems. In addition, the reduced computational requests of the MPC scheme allows coupling it with dynamic emulators of water quality processes. The approach is demonstrated on Marina Reservoir, a multi-purpose reservoir located in the heart of Singapore and characterized by a large, highly urbanized catchment with a short (i.e. approximately one hour) time of concentration. Results show that the MPC scheme, coupled with a water quality emulator, provides a good compromise between different operating objectives, namely flood risk reduction, drinking water supply and salinity control. Finally, the scheme is used to assess the effect of source control measures (e.g. green roofs) aimed at restoring the natural hydrological regime of Marina Reservoir catchment.

  8. Sleep Disordered Breathing in Early Childhood: Quality of Life for Children and Families

    PubMed Central

    Jackman, Angela R.; Biggs, Sarah N.; Walter, Lisa M.; Embuldeniya, Upeka S.; Davey, Margot J.; Nixon, Gillian M.; Anderson, Vicki; Trinder, John; Horne, Rosemary S. C.

    2013-01-01

    Objectives: To characterize health-related quality of life (QOL) in preschool children with sleep disordered breathing (SDB) and their families compared with nonsnoring control patients in the community. It was hypothesized that children with SDB and their families would have poorer QOL than control children, that a relationship would be found between SDB severity and QOL, and that even children with mild SDB and their families would have reduced QOL. Participants and Methods: A clinical sample of preschool children (3-5 y) with SDB diagnosed by gold standard polysomnography (primary snoring, PS = 56, mild obstructive sleep apnea, OSA = 35, moderate/severe OSA = 24) and control children recruited from the community (n = 38) were studied. Parents completed health-related QOL and parenting stress questionnaires. Results: Children and families in the PS and mild OSA groups had consistently poorer QOL than control children (both P < 0.05-0.001), based on parent ratings, and parents of children with PS had elevated stress ratings relative to control children (P < 0.05-0.001). The moderate/severe OSA group differed from the control group on select measures of parent and family QOL (worry, P < 0.001 and total family impact, P < 0.05). Conclusions: Our findings demonstrate that sleep disordered breathing is associated with reduced quality of life in preschool children and their families. These results support previous quality of life findings in older children and in samples with broader age ranges. Furthermore, clinically referred preschool children with mild forms of sleep disordered breathing may be at greatest risk. Citation: Jackman AR; Biggs SN; Walter LM; Embuldeniya US; Davey MJ; Nixon GM; Anderson V; Trinder J; Horne RSC. Sleep disordered breathing in early childhood: quality of life for children and families. SLEEP 2013;36(11):1639-1646. PMID:24179296

  9. Assessment of an intervention to train teaching hospital care providers in quality management

    PubMed Central

    Francois, P; Vinck, D; Labarere, J; Reverdy, T; Peyrin, J

    2005-01-01

    Background: Successful implementation of continuous quality improvement (CQI) programs in hospitals remains rare in all countries, making it necessary to experiment with implementation methods while considering the cultural factors of resistance to change. Objective: To assess the impact of an educational intervention on involvement of clinical department staff in the quality process. Setting: Twelve voluntary clinical departments (six experimental and six controls) in a French 2000-bed university hospital comprising 40 clinical departments. Intervention: Three day training seminar to a group of 12–20 staff members from each department. Design: Quasi-experimental post-test only design study with control group conducted 12 months after the intervention with a questionnaire completed in a face-to-face interview. Subjects: 98 trained staff and 100 untrained staff from the six experimental departments and 100 staff from the six control departments. Principal measurements: Declared knowledge of the CQI methods and participation in quality management activities. Results: 286 people (96%) were involved in the study. More of the trained staff knew the CQI methods (62.4%) than staff in the control departments (16.5%) (adjusted odds ratio (ORa) = 10.6 (95% CI 4.97 to 22.62)). More trained staff also participated in quality improvement work groups than control department staff (76.3% v 14.0%; ORa = 27.4 (95% CI 11.6 to 64.4)). In the experimental departments the untrained staff's knowledge of CQI methods and their participation in work groups did not differ from that of control department staff. Conclusions: A continuing education intervention can involve care providers in CQI. Dissemination of knowledge from trained personnel to other staff members remains limited. PMID:16076785

  10. A perspective on the FAA approval process: Integrating rotorcraft displays, controls and workload

    NASA Technical Reports Server (NTRS)

    Green, David L.; Hart, Jake; Hwoschinsky, Peter

    1993-01-01

    The FAA is responsible for making the determination that a helicopter is safe for IFR operations in the National Airspace System (NAS). This involves objective and subjective evaluations of cockpit displays, flying qualities, procedures and human factors as they affect performance and workload. After all of the objective evaluations are completed, and all Federal Regulations have been met, FAA pilots make the final subjective judgement as to suitability for use by civil pilots in the NAS. The paper uses the flying qualities and pilot workload characteristics of a small helicopter to help examine the FAA pilot's involvement in this process. The result highlights the strengths of the process and its importance to the approval of new aircraft and equipments for civil IFR helicopter applications. The paper also identifies opportunities for improvement.

  11. MO-A-16A-01: QA Procedures and Metrics: In Search of QA Usability

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sathiaseelan, V; Thomadsen, B

    Radiation therapy has undergone considerable changes in the past two decades with a surge of new technology and treatment delivery methods. The complexity of radiation therapy treatments has increased and there has been increased awareness and publicity about the associated risks. In response, there has been proliferation of guidelines for medical physicists to adopt to ensure that treatments are delivered safely. Task Group recommendations are copious, and clinical physicists' hours are longer, stretched to various degrees between site planning and management, IT support, physics QA, and treatment planning responsibilities.Radiation oncology has many quality control practices in place to ensure themore » delivery of high-quality, safe treatments. Incident reporting systems have been developed to collect statistics about near miss events at many radiation oncology centers. However, tools are lacking to assess the impact of these various control measures. A recent effort to address this shortcoming is the work of Ford et al (2012) who recently published a methodology enumerating quality control quantification for measuring the effectiveness of safety barriers. Over 4000 near-miss incidents reported from 2 academic radiation oncology clinics were analyzed using quality control quantification, and a profile of the most effective quality control measures (metrics) was identified.There is a critical need to identify a QA metric to help the busy clinical physicists to focus their limited time and resources most effectively in order to minimize or eliminate errors in the radiation treatment delivery processes. In this symposium the usefulness of workflows and QA metrics to assure safe and high quality patient care will be explored.Two presentations will be given:Quality Metrics and Risk Management with High Risk Radiation Oncology ProceduresStrategies and metrics for quality management in the TG-100 Era Learning Objectives: Provide an overview and the need for QA usability metrics: Different cultures/practices affecting the effectiveness of methods and metrics. Show examples of quality assurance workflows, Statistical process control, that monitor the treatment planning and delivery process to identify errors. To learn to identify and prioritize risks and QA procedures in radiation oncology. Try to answer the question: Can a quality assurance program aided by quality assurance metrics help minimize errors and ensure safe treatment delivery. Should such metrics be institution specific.« less

  12. Microbiological monitoring for the US Geological Survey National Water-Quality Assessment Program

    USGS Publications Warehouse

    Francy, Donna S.; Myers, Donna N.; Helsel, Dennis R.

    2000-01-01

    Data to characterize the microbiological quality of the Nation?s fresh, marine, and estuarine waters are usually collected for local purposes, most often to judge compliance with standards for protection of public health in swimmable or drinkable waters. Methods and procedures vary with the objectives and practices of the parties collecting data and are continuously being developed or modified. Therefore, it is difficult to provide a nationally consistent picture of the microbial quality of the Nation?s waters. Study objectives and guidelines for a national microbiological monitoring program are outlined in this report, using the framework of the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) program. A national program is designed to provide long-term data on the presence of microbiological pathogens and indicators in ground water and surface water to support effective water policy and management. Three major groups of waterborne pathogens affect the public health acceptability of waters in the United States?bacteria, protozoa, and viruses. Microbiological monitoring in NAWQA would be designed to assess the occurrence, distribution, and trends of pathogenic organisms and indicators in surface waters and ground waters; relate the patterns discerned to factors that help explain them; and improve our understanding of the processes that control microbiological water quality.

  13. Depressive Symptomatology, Quality of Life and Disease Control among Individuals with Well-Characterized Severe Asthma

    PubMed Central

    Yonas, Michael A.; Marsland, Anna L.; Emeremni, Chetachi A.; Moore, Charity G.; Holguin, Fernando; Wenzel, Sally

    2014-01-01

    Objectives A thorough examination of the relationship of asthma severity and control with symptoms of depression is needed to identify groups of asthmatics at high risk for poor disease control outcomes. This study examines the relationship of symptoms of depression with severity and control in a well characterized cohort of asthmatics and healthy controls. Methods Depressive symptoms and quality of life were assessed using the Beck Depression Inventory. Disease control was measured by a composite index incorporating symptoms, activity limitation, and rescue medication use. Results Individuals with asthma (n=91) reported more symptoms of depression than controls (n=36; p<0.001). Those with Severe asthma (n=49) reported more symptoms of depression (p=0.002) and poorer asthma control (p<0.0001) than those with Not Severe asthma. Worse asthma control was associated with more depressive symptoms in Severe (r=0.46, p=0.002) but not in Not Severe (r=0.13, p=0.40) asthmatics. The relationship of symptoms of depression among Severe asthmatics was attenuated by disease control. Exploratory analyses identified specific disease symptom characteristics, as opposed to exacerbations, as associated with symptoms of depression. Conclusions Among individuals with severe asthma, increased symptom burden is positively associated with risk for co-morbid depression. These findings point to a need for regular mood disorder screenings and treatment referrals among this group. Further research is warranted to examine whether treatment of comorbid depression improves treatment adherence and asthma-related quality of life. PMID:23725317

  14. Baduanjin Exercise for Stroke Rehabilitation: A Systematic Review with Meta-Analysis of Randomized Controlled Trials

    PubMed Central

    Wang, Chaoyi; Chen, Xiaoan; Wang, Huiru

    2018-01-01

    Objective: The purpose of this review was to objectively evaluate the effects of Baduanjin exercise on rehabilitative outcomes in stroke patients. Methods: Both Chinese and English electronic databases were searched for potentially relevant trials. Two review authors independently screened eligible trials against the inclusion criteria, extracted data, and assessed the methodological quality by using the revised PEDro scale. Meta-analysis was only performed for balance function. Results: In total, there were eight randomized controlled trials selected in this systematic review. The aggregated result of four trials has shown a significant benefit in favor of Baduanjin on balance function (Hedges’ g = 2.39, 95% CI 2.14 to 2.65, p < 0.001, I2 = 61.54). Additionally, Baduanjin exercise effectively improved sensorimotor function of lower extremities and ability of daily activities as well as reduced depressive level, leading to improved quality of life. Conclusion: Baduanjin exercise as an adjunctive and safe method may be conducive to help stroke patients achieve the best possible short-term outcome and should be integrated with mainstream rehabilitation programs. More rigorous randomized controlled trials with long-term intervention periods among a large sample size of stroke patients are needed to draw a firm conclusion regarding the rehabilitative effects for this population. PMID:29584623

  15. Clinical Decision Support System to Enhance Quality Control of Spirometry Using Information and Communication Technologies

    PubMed Central

    2014-01-01

    Background We recently demonstrated that quality of spirometry in primary care could markedly improve with remote offline support from specialized professionals. It is hypothesized that implementation of automatic online assessment of quality of spirometry using information and communication technologies may significantly enhance the potential for extensive deployment of a high quality spirometry program in integrated care settings. Objective The objective of the study was to elaborate and validate a Clinical Decision Support System (CDSS) for automatic online quality assessment of spirometry. Methods The CDSS was done through a three step process including: (1) identification of optimal sampling frequency; (2) iterations to build-up an initial version using the 24 standard spirometry curves recommended by the American Thoracic Society; and (3) iterations to refine the CDSS using 270 curves from 90 patients. In each of these steps the results were checked against one expert. Finally, 778 spirometry curves from 291 patients were analyzed for validation purposes. Results The CDSS generated appropriate online classification and certification in 685/778 (88.1%) of spirometry testing, with 96% sensitivity and 95% specificity. Conclusions Consequently, only 93/778 (11.9%) of spirometry testing required offline remote classification by an expert, indicating a potential positive role of the CDSS in the deployment of a high quality spirometry program in an integrated care setting. PMID:25600957

  16. Local environmental quality positively predicts breastfeeding in the UK’s Millennium Cohort Study

    PubMed Central

    Sear, Rebecca

    2017-01-01

    ABSTRACT Background and Objectives: Breastfeeding is an important form of parental investment with clear health benefits. Despite this, rates remain low in the UK; understanding variation can therefore help improve interventions. Life history theory suggests that environmental quality may pattern maternal investment, including breastfeeding. We analyse a nationally representative dataset to test two predictions: (i) higher local environmental quality predicts higher likelihood of breastfeeding initiation and longer duration; (ii) higher socioeconomic status (SES) provides a buffer against the adverse influences of low local environmental quality. Methodology: We ran factor analysis on a wide range of local-level environmental variables. Two summary measures of local environmental quality were generated by this analysis—one ‘objective’ (based on an independent assessor’s neighbourhood scores) and one ‘subjective’ (based on respondent’s scores). We used mixed-effects regression techniques to test our hypotheses. Results: Higher objective, but not subjective, local environmental quality predicts higher likelihood of starting and maintaining breastfeeding over and above individual SES and area-level measures of environmental quality. Higher individual SES is protective, with women from high-income households having relatively high breastfeeding initiation rates and those with high status jobs being more likely to maintain breastfeeding, even in poor environmental conditions. Conclusions and Implications: Environmental quality is often vaguely measured; here we present a thorough investigation of environmental quality at the local level, controlling for individual- and area-level measures. Our findings support a shift in focus away from individual factors and towards altering the landscape of women’s decision making contexts when considering behaviours relevant to public health. PMID:29354262

  17. DEMONSTRATION AND QUALITY ASSURANCE PROJECT ...

    EPA Pesticide Factsheets

    The demonstration of technologies for determining the presence of dioxin in soil and sediment is being conducted under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in Saginaw, Michigan, at Green Point Environmental Learning Center from approximately April 26 to May 6, 2004. The primary purpose of the demonstration is to evaluate innovative monitoring technologies. The technologies listed below will be demonstrated. .AhRC PCRTM Kit, Hybrizyme Corporation .Ah-IMMUNOASSY@ Kit, Paralsian, Inc. .Coplanar PCB Immunoassay Kit, Abraxis LLC .DF-l Dioxin/Furan Immunoassay Kit, CAPE Technologies L.L.C. .CALUX@ by Xenobiotic Detection Systems, Inc- .Dioxin ELISA Kit, Wako Pure Chemical Industries LTD. This demonstration plan describes the procedures that will be used to verify the performance and cost of these technologies. The plan incorporates the quality assurance and quality control elements needed to generate data of sufficient quality to document each technology's performance and cost. A separate innovative technology verification report (ITVR) will.be prepared for each technology. The ITVRs will present the demonstration findings associated with the demonstration objectives. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

  18. Perceived quality of management information and the influence of overspending penalties in the NHS.

    PubMed

    Marriott, N; Mellett, H

    1996-11-01

    The information needs of managers have changed considerably since the introduction of the internal market and many NHS units have invested in new management information systems to enhance the organization's performance. The characteristics of good quality information include accuracy, timeliness and comprehension. Information for management control also benefits from participation between the provider and the user. There are behavioural implications of using information as a control device and managers must internalize the financial objectives of the organization, usually expressed in budget reports. Failure to meet targets must attract penalties that will influence the managers' behaviour. They must respond to the information provided if control is to be exercised. This paper gives the results of a study into managers' perceptions of the adequacy and usefulness of financial information and the impact of penalties for overspending. It concludes that the financial information currently provided fails to meet many of the criteria of good quality information. Any perceived penalty for failing to attain budget-related goals is better than none, and there is little distinction between an overt reprimand and the ultimate sanction of dismissal.

  19. Chemical composition, starch digestibility and antioxidant capacity of tortilla made with a blend of quality protein maize and black bean.

    PubMed

    Grajales-García, Eva M; Osorio-Díaz, Perla; Goñi, Isabel; Hervert-Hernández, Deisy; Guzmán-Maldonado, Salvador H; Bello-Pérez, Luis A

    2012-01-01

    Tortilla and beans are the basic components in the diet of people in the urban and rural areas of Mexico. Quality protein maize is suggested for tortilla preparation because it presents an increase in lysine and tryptophan levels. Beans contain important amounts of dietary fiber. The objective of this study was to prepare tortilla with bean and assesses the chemical composition, starch digestibility and antioxidant capacity using a quality protein maize variety. Tortilla with bean had higher protein, ash, dietary fiber and resistant starch content, and lower digestible starch than control tortilla. The hydrolysis rate (60 to 50%) and the predicted glycemic index (88 to 80) of tortilla decreased with the addition of bean in the blend. Extractable polyphenols and proanthocyanidins were higher in the tortilla with bean than control tortilla. This pattern produced higher antioxidant capacity of tortilla with bean (17.6 μmol Trolox eq/g) than control tortilla (7.8 μmol Trolox eq/g). The addition of bean to tortilla modified the starch digestibility and antioxidant characteristics of tortilla, obtaining a product with nutraceutical characteristics.

  20. Collection, storage, inspection and quality control of platelet concentrates obtained by apheresis: The situation in Spain.

    PubMed

    Castrillo, Azucena; Jimenez-Marco, Teresa; Arroyo, José L; Jurado, María L; Larrea, Luis; Maymo, Rosa M; Monge, Jorge; Muñoz, Carmen; Pajares, Ángel; Yáñez, Marta

    2017-06-01

    Diverse variables are involved in apheresis platelet collection, processing and storage. This survey shows how these are realized in Spain. An analysis of collected data was performed in a questionnaire completed by ten Transfusion Centers (TC) which perform between 50 and 520 apheresis procedures per month. This information comprises the procedures used to collect, inspect and store apheresis platelet concentrates (PC), and quality control data. Macroscopic inspection of PC is performed in all TC, especially during the first few hours post-collection and before distribution. The type of processor, duration of post-collection resting periods and temperature from the time of collection until distribution are similar in all TC. In 80% of TC, PC with small and scarce aggregates are distributed to transfusion services. The presence of clumps is influenced by type of processor, female donor, cold ambient temperature and collection of hyperconcentrated platelets, and is often recurrent in the same donor, although some TC have not found any influential variables. Overall, no objective inspection methods are followed, although there are exceptions. The degree of compliance with quality control parameters, such as the number of units studied, mean platelet yield, residual leukocyte counts and pH at expiry date, is acceptable in all TC. Compliance in terms of number of microbiological culture samples is variable. The usual practice in Spanish TC with respect to the collection, post-collection handling and storage of apheresis PC can be considered uniform, although some specific aspects of analyses should follow more objective methods. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Efficacy of a short cognitive training program in patients with multiple sclerosis

    PubMed Central

    Pérez-Martín, María Yaiza; González-Platas, Montserrat; Eguía-del Río, Pablo; Croissier-Elías, Cristina; Jiménez Sosa, Alejandro

    2017-01-01

    Background Cognitive impairment is a common feature in multiple sclerosis (MS) and may have a substantial impact on quality of life. Evidence about the effectiveness of neuropsychological rehabilitation is still limited, but current data suggest that computer-assisted cognitive training improves cognitive performance. Objective The objective of this study was to evaluate the efficacy of combined computer-assisted training supported by home-based neuropsychological training to improve attention, processing speed, memory and executive functions during 3 consecutive months. Methods In this randomized controlled study blinded for the evaluators, 62 MS patients with clinically stable disease and mild-to-moderate levels of cognitive impairment were randomized to receive a computer-assisted neuropsychological training program (n=30) or no intervention (control group [CG]; n=32). The cognitive assessment included the Brief Repeatable Battery of Neuropsychological Test. Other secondary measures included subjective cognitive impairment, anxiety and depression, fatigue and quality of life measures. Results The treatment group (TG) showed significant improvements in measures of verbal memory, working memory and phonetic fluency after intervention, and repeated measures analysis of covariance revealed a positive effect in most of the functions. The control group (CG) did not show changes. The TG showed a significant reduction in anxiety symptoms and significant improvement in quality of life. There were no improvements in fatigue levels and depressive symptoms. Conclusion Cognitive intervention with a computer-assisted training supported by home training between face-to-face sessions is a useful tool to treat patients with MS and improve functions such as verbal memory, working memory and phonetic fluency. PMID:28223806

  2. A systematic review of nonrandomized controlled trials on the curative effects of aquatic exercise

    PubMed Central

    Kamioka, Hiroharu; Tsutani, Kiichiro; Mutoh, Yoshiteru; Okuizum, Hiroyasu; Ohta, Miho; Handa, Shuichi; Okada, Shinpei; Kitayuguchi, Jun; Kamada, Masamitsu; Shiozawa, Nobuyoshi; Park, Sang-Jun; Honda, Takuya; Moriyama, Shoko

    2011-01-01

    Background: The objectives of this review were to integrate the evidence of curative effects through aquatic exercise and assess the quality of studies based on a review of nonrandomized controlled trials (nRCTs). Methods: Study design was a systematic review of nonrandomized controlled trials. Trials were eligible if they were nonrandomized clinical trials. Studies included one treatment group in which aquatic exercise was applied. We searched the following databases from 2000 up to July 20, 2009: MEDLINE via PubMed, CINAHL, and Ichushi-Web. Results: Twenty-one trials met all inclusion criteria. Languages included were English (N = 9), Japanese (N = 11), and Korean (N = 1). Target diseases were knee and/or hip osteoarthritis, poliomyelitis, chronic kidney disease, discomforts of pregnancy, cardiovascular diseases, and rotator cuff tears. Many studies on nonspecific disease (healthy participants) were included. All studies reported significant effectiveness in at least one or more outcomes. However results of evaluations with the TREND and CLEAR-NPT checklists generally showed a remarkable lack of description in the studies. Furthermore, there was the problem of heterogeneity, and we were therefore not able to perform a meta-analysis. Conclusion: Because there was insufficient evidence on aquatic exercise due to poor methodological and reporting quality and heterogeneity of nRCTs, we were unable to offer any conclusions about the effects of this intervention. However, we were able to identify problems with current nRCTs of aquatic exercise, and propose a strategy of strengthening study quality, stressing the importance of study feasibility as a future research agenda objective. PMID:21556311

  3. Parametric optimization of multiple quality characteristics in laser cutting of Inconel-718 by using hybrid approach of multiple regression analysis and genetic algorithm

    NASA Astrophysics Data System (ADS)

    Shrivastava, Prashant Kumar; Pandey, Arun Kumar

    2018-06-01

    Inconel-718 has found high demand in different industries due to their superior mechanical properties. The traditional cutting methods are facing difficulties for cutting these alloys due to their low thermal potential, lower elasticity and high chemical compatibility at inflated temperature. The challenges of machining and/or finishing of unusual shapes and/or sizes in these materials have also faced by traditional machining. Laser beam cutting may be applied for the miniaturization and ultra-precision cutting and/or finishing by appropriate control of different process parameter. This paper present multi-objective optimization the kerf deviation, kerf width and kerf taper in the laser cutting of Incone-718 sheet. The second order regression models have been developed for different quality characteristics by using the experimental data obtained through experimentation. The regression models have been used as objective function for multi-objective optimization based on the hybrid approach of multiple regression analysis and genetic algorithm. The comparison of optimization results to experimental results shows an improvement of 88%, 10.63% and 42.15% in kerf deviation, kerf width and kerf taper, respectively. Finally, the effects of different process parameters on quality characteristics have also been discussed.

  4. Longitudinal flying qualities criteria for single-pilot instrument flight operations

    NASA Technical Reports Server (NTRS)

    Stengel, R. F.; Bar-Gill, A.

    1983-01-01

    Modern estimation and control theory, flight testing, and statistical analysis were used to deduce flying qualities criteria for General Aviation Single Pilot Instrument Flight Rule (SPIFR) operations. The principal concern is that unsatisfactory aircraft dynamic response combined with high navigation/communication workload can produce problems of safety and efficiency. To alleviate these problems. The relative importance of these factors must be determined. This objective was achieved by flying SPIFR tasks with different aircraft dynamic configurations and assessing the effects of such variations under these conditions. The experimental results yielded quantitative indicators of pilot's performance and workload, and for each of them, multivariate regression was applied to evaluate several candidate flying qualities criteria.

  5. Sleep Quality, Sleep EEG Pattern, Mental Well-Being and Cortisol Secretion in Patients with Ruptured Aneurysm Post-Treatment: A Comparison with Post-Surgery Meningioma Patients and Controls.

    PubMed

    Gerber, Markus; Colledge, Flora; Pühse, Uwe; Holsboer-Trachsler, Edith; Zimmerer, Stefan; Brand, Serge

    2016-01-01

    Although the chance of surviving an aneurysmal subarachnoid haemorrhage (aSAH) has increased steadily, disturbed sleep and persistent psychological complaints are frequently experienced post-ictus. To date, however, few studies have sought to determine whether physiological parameters, such as objectively measured sleep and cortisol secretion, interrelate significantly with low sleep quality and psychological complaints such as depression. Furthermore, there is little evidence as to whether post-ictal complaints differ between aSAH patients and other groups who have experienced stressful medical intervention. Data on objective and subjective sleep, sleep-related dysfunctional cognitions, psychological functioning and cortisol secretion were collected from 15 patients who had undergone medical intervention for aSAH. Data were also collected from a group of 16 individuals who had undergone surgery for a meningioma and a third group made up of 17 healthy participants. aSAH patients and meningioma patients had significantly poorer subjective sleep than healthy controls and reported more sleep-related dysfunctional cognitions and hypochondriacal beliefs. They also had a significantly higher morning cortisol response. Finally, a non-significant trend was found showing that aSAH patients and meningioma patients reported poorer psychological functioning than healthy controls. Following treatment, aSAH patients and meningioma patients experience poorer subjective sleep and some differences in objectively measured sleep, which might be attributable to increased sleep-related dysfunctional cognitions and poorer overall psychological functioning. Differences in cortisol production were also observed, suggesting that some physiological imbalances are still present post-ictus. © 2016 S. Karger AG, Basel.

  6. Methodological Quality of Randomized Clinical Trials of Respiratory Physiotherapy in Coronary Artery Bypass Grafting Patients in the Intensive Care Unit: a Systematic Review

    PubMed Central

    Lorscheitter, Jaqueline; Stein, Cinara; Plentz, Rodrigo Della Méa

    2017-01-01

    Objective To assess methodological quality of the randomized controlled trials of physiotherapy in patients undergoing coronary artery bypass grafting in the intensive care unit. Methods The studies published until May 2015, in MEDLINE, Cochrane and PEDro were included. The primary outcome extracted was proper filling of the Cochrane Collaboration's tool's items and the secondary was suitability to the requirements of the CONSORT Statement and its extension. Results From 807 studies identified, 39 were included. Most at CONSORT items showed a better adequacy after the statement's publication. Studies with positive outcomes presented better methodological quality. Conclusion The methodological quality of the studies has been improving over the years. However, many aspects can still be better designed. PMID:28977205

  7. LANDING QUALITY IN ARTISTIC GYMNASTICS IS RELATED TO LANDING SYMMETRY

    PubMed Central

    Marinšek, M.

    2013-01-01

    In gymnastics every exercise finishes with a landing. The quality of landing depends on subjective (e.g. biomechanical) and objective (e.g. mechanical characteristics of landing area) factors. The aim of our research was to determine which biomechanical (temporal, kinematic and dynamic) characteristics of landing best predict the quality of landing. Twelve male gymnasts performed a stretched forward and backward salto; also with 1/2, 1/1 and 3/2 turns. Stepwise multiple regression extracted five predictors which explained 51.5% of landing quality variance. All predictors were defining asymmetries between legs (velocities, angles). To avoid asymmetric landings, gymnasts need to develop enough height; they need higher angular momentum around the transverse and longitudinal axis and they need to better control angular velocity in the longitudinal axis. PMID:24744462

  8. Multi Objective Optimization of Yarn Quality and Fibre Quality Using Evolutionary Algorithm

    NASA Astrophysics Data System (ADS)

    Ghosh, Anindya; Das, Subhasis; Banerjee, Debamalya

    2013-03-01

    The quality and cost of resulting yarn play a significant role to determine its end application. The challenging task of any spinner lies in producing a good quality yarn with added cost benefit. The present work does a multi-objective optimization on two objectives, viz. maximization of cotton yarn strength and minimization of raw material quality. The first objective function has been formulated based on the artificial neural network input-output relation between cotton fibre properties and yarn strength. The second objective function is formulated with the well known regression equation of spinning consistency index. It is obvious that these two objectives are conflicting in nature i.e. not a single combination of cotton fibre parameters does exist which produce maximum yarn strength and minimum cotton fibre quality simultaneously. Therefore, it has several optimal solutions from which a trade-off is needed depending upon the requirement of user. In this work, the optimal solutions are obtained with an elitist multi-objective evolutionary algorithm based on Non-dominated Sorting Genetic Algorithm II (NSGA-II). These optimum solutions may lead to the efficient exploitation of raw materials to produce better quality yarns at low costs.

  9. Timber marking guidelines to minimize chainsaw felling accidents

    Treesearch

    Penn A. Peters; Michael D. Erickson; Curt D. Hassler

    1995-01-01

    Trees are marked by foresters for retention or harvest to satisfy landowner objectives for timber sale revenues, stand improvement, wildlife habitat, water quality, and aesthetics. Another consideration when marking trees is the safety of the chainsaw feller. Can the tree that has been marked for harvest be felled safely? Will the feller be able to select and control a...

  10. Systematic Literature Review of Randomized Control Trials Assessing the Effectiveness of Nutrition Interventions in Community-Dwelling Older Adults

    ERIC Educational Resources Information Center

    Bandayrel, Kristofer; Wong, Sharon

    2011-01-01

    Objective: Nutrition interventions may play an important role in maintaining the health and quality of life in community-dwelling older adults. To the authors' knowledge, no systematic literature review has been conducted on the effectiveness of nutrition interventions in the community-dwelling older adult population. Design: Systematic literature…

  11. Bulletin of Courses, July 1970 to December 1971, Water Pollution Control Training Program.

    ERIC Educational Resources Information Center

    Department of the Interior, Washington, DC. Federal Water Pollution Control Administration.

    This bulletin describes the courses offered at the five Federal Water Quality Administration training centers in the U.S. from July 1970 to December 1971. Information for applicants, applications for training forms and addresses of related Environmental Training Programs are included. The objective of the program is to provide specialized training…

  12. Evaluating the Effectiveness of a Participatory Empowerment Group for Chinese Type 2 Diabetes Patients

    ERIC Educational Resources Information Center

    Lou, Vivian W. Q.; Zhang, Yiqi

    2006-01-01

    Objective: This study evaluated the effectiveness of a Participatory Empowerment Group (PEG) for Chinese type 2 diabetes patients in Shanghai. Method: A randomized waiting list control and pretest and posttest comparisons were used to evaluate the effectiveness of the intervention by comparing blood sugar level and health-related quality of life.…

  13. Silviculture guide for the mahogany forests of Quintana Roo, Mexico – Criteria and recommendations

    Treesearch

    P. Negreros-Castillo; L. Cámara-Cabrales; Margaret Devall; M.A. Fajvan; M.A. Mendoza Briseño; C.W. Mize

    2014-01-01

    Silviculture is the art, science and practice of controlling the establishment, composition, health, quality and growth of forests to accomplish a set of management objectives. This publication offers an approach to silviculture of the forests of Quintana Roo in which mahogany (Swietenia macrophylla King), the commercially most important tree species in Latin America,...

  14. The Effects of a Pedometer-Based Intervention on First-Year University Students: A Randomized Control Trial

    ERIC Educational Resources Information Center

    Sharp, Paul; Caperchione, Cristina

    2016-01-01

    Objectives: To assess the effects of a 12-week pedometer-based intervention on the physical activity behavior, health-related quality of life (HRQOL), and psychological well-being of first-year university students. Participants: First-year university students (N = 184) were recruited during September 2012 and randomly assigned to an intervention…

  15. Physical Activity Intervention Using Fitbits in an Introductory College Health Course

    ERIC Educational Resources Information Center

    Rote, Aubrianne E

    2017-01-01

    Objective: This study took the form of an intervention examining change in physical activity and quality of experience among students in an introductory health course who were asked to wear a Fitbit activity monitor throughout the semester. Method: College students (N = 56) took part in this controlled trial. Students enrolled in an introductory…

  16. All in the name of flavour, fragrance & freshness: Commonly used smokeless tobacco preparations in & around a tertiary hospital in India

    PubMed Central

    Dwivedi, Shridhar; Aggarwal, Amitesh; Dev, Munish

    2012-01-01

    Background & objectives: There is a general misconception that smokeless tobacco particularly sweetened and flavoured paan masala and gutkas are safe to use. The present study was undertaken with the objective of highlighting the deceptive and aggressive marketing techniques adopted by the manufacturers of smokeless tobacco preparations exploiting cultural, social and religious values. Another object was to highlight the lack of transparency in terms of content, weight, quality control and warning. Methods: All empty pouches of the used paan masalas, gutka, khaini or surti in and around a tertiary care hospital at east Delhi were collected. Their constituents were studied as per written declaration by the manufacturers on each packet. Information on net weight, cost, presence and type of warning, and quality assurance on each brand provided on side of the packets was noted. Results: A total of 1136 pouches of 33 brands/varieties were collected. Most of the gutka preparations contained tobacco, betel nut, unknown flavouring agents, undeclared spices and heavy metals. Warning regarding the harmful effect of tobacco was written in 90.9 per cent of brands with 81.8 per cent in English language only in minute font. Contents of the products were mentioned in 84.8 per cent of brands and only 27.3 per cent of those mentioned the net weight of the ingredients. Interpretation & conclusions: Seemingly ‘innocuous’ tobacco preparations in the form of paan masalas, gutka, khaini, surti or mouth fresheners contain various harmful substance like tobacco, betel nut, sugar coated fennel, saccharine, heavy metals like silver, unknown flavouring agents and undeclared spices in unknown quantities. Lack of transparency in terms of content, weight, quality control and warning is duping unsuspecting consumers. PMID:23287132

  17. Effects of vegetable juice powder concentration and storage time on some chemical and sensory quality attributes of uncured, emulsified cooked sausages.

    PubMed

    Sindelar, J J; Cordray, J C; Sebranek, J G; Love, J A; Ahn, D U

    2007-06-01

    Uncured, no-nitrate/nitrite-added meat products can be manufactured with vegetable juice powder (VJP) and a starter culture containing Staphylococcus carnosus, resulting in quality and sensory attributes similar to traditional cured products. The 1st objective of this study was to determine the effects of varying concentrations of VJP and incubation times (MIN-HOLD) on quality characteristics, including lipid oxidation, color, and cured meat pigment concentrations, of emulsified-frankfurter-style-cooked (EFSC) sausages over a 90-d storage period. The 2nd objective was to compare residual nitrate and nitrite content resulting from different processing treatments and the 3rd objective was to assess sensory properties of finished products. Four EFSC sausage treatments (TRT) (TRT 1: 0.20% VJP, 30 MIN-HOLD; TRT 2: 0.20% VJP, 120 MIN-HOLD; TRT 3: 0.40% VJP, 30 MIN-HOLD; TRT 4: 0.40% VJP, 120 MIN-HOLD) and a sodium nitrite-added control (C) were used for this study. No differences for lipid oxidation (TBARS) between any TRTs and C or over time were observed. No differences (P > 0.05) for CIE L* values were found between TRTs. CIE a* and reflectance ratio values revealed that TRTs 2, 4, and C were redder than TRTs 1 and 3 at day 0. Trained sensory intensity ratings for cured aroma, cured color, cured flavor, uniform color, and firmness determined that all but TRT 1 were similar to C. These results indicate a longer incubation time (120 compared with 30 min) was found more critical than VJP level (0.20% or 0.40%) to result in products comparable to a sodium nitrite-added control.

  18. Sleep-Disordered Breathing in Chronic SCI: A Randomized Controlled Trial of Treatment Impact on Cognition, Quality of Life, and Cardiovascular Disease

    DTIC Science & Technology

    2015-10-01

    randomized controlled trial, we will objectively measure sleep disordered breathing ( SDB ) in chronic SCI patients using portable sleep studies, and...systematically evaluate the association between SDB , cognitive performance, mood, pain, and CV measures. We will randomize participants to 4 months of PAP...TERMS SDB , SCI, PAP, CV 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF RESPONSIBLE PERSON USAMRMC a

  19. Sleep Disordered Breathing in Chronic SCI: A Randomized Controlled Trial of Treatment Impact on Cognition, Quality of Life, and Cardiovascular Disease

    DTIC Science & Technology

    2015-11-30

    randomized controlled trial, we will objectively measure sleep disordered breathing ( SDB ) in chronic SCI patients using portable sleep studies, and...systematically evaluate the association between SDB , cognitive performance, mood, pain, and CV measures. We will randomize participants to 4 months of PAP...TERMS SDB , SCI, PAP, CV 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF RESPONSIBLE PERSON USAMRMC a

  20. Effect of aerobic training on hot flushes and quality of life—a randomized controlled trial

    PubMed Central

    Luoto, Riitta; Moilanen, Jaana; Heinonen, Reetta; Mikkola, Tomi; Raitanen, Jani; Tomas, Eija; Ojala, Katriina; Mansikkamäai, Kirsi; Nygård, Clas-Håkan

    2012-01-01

    Background and objective. To estimate whether aerobic training has an effect on frequency of hot flushes or quality of life. Design. A randomized controlled trial. Participants and setting. Symptomatic, sedentary women (n = 176), 43–63 years, no current use of hormone therapy. Intervention. Unsupervised aerobic training for 50 minutes four times per week during 6 months. Outcomes. Hot flushes as measured with Women's Health Questionnaire (WHQ) and Health-Related Quality of Life (HRQoL, SF-36), daily reported hot flushes on phone-based diary, cardiorespiratory fitness (CRF), and body composition. Results. Intervention group had larger decrease in the frequency of night-time hot flushes based on phone diary (P for month X group = 0.012), but not on WHQ scale. Intervention group had less depressed mood (P= 0.01) than control women according to change in WHQ score. Changes in WHQ score in depressed mood (P = 0.03) and menstrual symptoms (P=0.01) in the intervention group were significantly dependent on frequency of training sessions. HRQoL was improved among the intervention group women in physical functioning (P= 0.049) and physical role limitation (P= 0.017). CRF improved (P= 0.008), and lean muscle mass increased (P= 0.046) significantly in the intervention group as compared to controls. Conclusions. Aerobic training may decrease the frequency of hot flushes and improve quality of life among slightly overweight women. PMID:21639722

  1. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jassal, K; Sarkar, B; Mohanti, B

    Objective: The study presents the application of a simple concept of statistical process control (SPC) for pre-treatment quality assurance procedure analysis for planar dose measurements performed using 2D-array and a-Si electronic portal imaging device (a-Si EPID). Method: A total of 195 patients of four different anatomical sites: brain (n1=45), head & neck (n2=45), thorax (n3=50) and pelvis (n4=55) were selected for the study. Pre-treatment quality assurance for the clinically acceptable IMRT/VMAT plans was measured with 2D array and a-Si EPID of the accelerator. After the γ-analysis, control charts and the quality index Cpm was evaluated for each cohort. Results: Meanmore » and σ of γ ( 3%/3 mm) were EPID γ %≤1= 99.9% ± 1.15% and array γ %<1 = 99.6% ± 1.06%. Among all plans γ max was consistently lower than for 2D array as compared to a-Si EPID. Fig.1 presents the X-bar control charts for every cohort. Cpm values for a-Si EPID were found to be higher than array, detailed results are presented in table 1. Conclusion: Present study demonstrates the significance of control charts used for quality management purposes in newer radiotherapy clinics. Also, provides a pictorial overview of the clinic performance for the advanced radiotherapy techniques.Higher Cpm values for EPID indicate its higher efficiency than array based measurements.« less

  2. Sperm quality and DNA integrity of coke oven workers exposed to polycyclic aromatic hydrocarbons.

    PubMed

    Jeng, Hueiwang Anna; Pan, Chih-Hong; Chao, Mu-Rong; Chiu, Chien-Chih; Zhou, Guodong; Chou, Chon-Kit; Lin, Wen-Yi

    2016-11-18

    The objective of this study was to assess sperm quality and deoxyribonucleic acid (DNA) integrity of coke oven workers exposed to polycyclic aromatic hydrocarbons (PAHs) as compared to control subjects. The coke oven workers (N = 52) and administrative staff (N = 35) of a steel plant served as the exposed and control groups, respectively. Exposure to PAHs was assessed by measuring 1-hydroxypyren. Analysis of sperm quality (concentration, motility, vitality, and morphology) was performed simultaneously with sperm DNA integrity analysis, including DNA fragmentation, denaturation, bulky DNA adducts, and 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxo-dGuo). A questionnaire was conducted to collect demographic and potential confounding data. The coke oven workers had lower percentages of sperm motility, vitality and normal morphology than the control group, but the difference was not significant. For DNA integrity, the coke oven workers had significantly higher concentrations of bulky DNA adducts and 8-oxo-dGuo than the control subjects (p = 0.009 and p = 0.048, respectively). However, DNA fragmentation percentages did not significantly increase as compared to those in the subjects from the control group (p = 0.232). There was no correlation between sperm quality parameters and DNA integrity indicators. Occupational exposure of the coke oven workers to PAHs was associated with decreased sperm DNA integrity. Int J Occup Med Environ Health 2016;29(6):915-926. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  3. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, Gary E.; Diefenderfer, Heida L.; Ebberts, Blaine D.

    The purpose ofthis document is to describe research, monitoring, and evaluation (RME) for the Federal Columbia River Estuary Program. The intent of this RME effort is to provide data and information to evaluate progress toward meeting program goals and objectives and support decision-making in the Estuary Program. The goal of the Estuary Program is to understand, conserve, and restore the estuary ecosystem to improve the performance of listed salmonid populations. The Estuary Program has five general objectives, designed to fulfill the program goal, as follows. 1. Understand the primary stressors affecting ecosystem controlling factors, such as ocean conditions and invasivemore » species. 2. Conserve and restore factors controlling ecosystem structures and processes, such as hydrodynamics and water quality. 3. Increase the quantity and quality of ecosystem structures, i.e., habitats, juvenile salmonids use during migration through the estuary. 4. Maintain the food web to benefit salmonid performance. 5. Improve salmonid performance in terms of life history diversity, foraging success, growth, and survival. The goal of estuary RME is to provide pertinent and timely research and monitoring information to planners, implementers, and managers of the Estuary Program. In conclusion, the estuary RME effort is designed to meet the research and monitoring needs of the estuary Program using an adaptive management process. Estuary RME's success and usefulness will depend on the actual conduct of adaptive management, as embodied in the objectives, implrementation, data, reporting, and synthesis, evaluation, and decision-making described herein.« less

  4. Exposure–Response Relationship Between Aircraft Noise and Sleep Quality: A Community-based Cross-sectional Study

    PubMed Central

    Kim, Soo Jeong; Chai, Sang Kug; Lee, Keou Won; Park, Jae-Beom; Min, Kyoung-Bok; Kil, Hyun Gwon; Lee, Chan; Lee, Kyung Jong

    2014-01-01

    Objectives Exposure to aircraft noise has been shown to have adverse health effects, causing annoyance and affecting the health-related quality of life, sleep, and mental states of those exposed to it. This study aimed to determine sleep quality in participants residing near an airfield and to evaluate the relationship between the levels of aircraft noise and sleep quality. Methods Neighboring regions of a military airfield were divided into three groups: a high exposure group, a low exposure group, and a control group. A total of 1082 participants (aged 30–79 years) completed a comprehensive self-administered questionnaire requesting information about demographics, medical history, lifestyle, and the Pittsburgh Sleep Quality Index. Results Of the 1082 participants, 1005 qualified for this study. The prevalence of sleep disturbance was 45.5% in the control group, 71.8% in the low exposure group, and 77.1% in the high exposure group (p for trend < 0.001). After adjusting for potential confounding factors, we determined the exposure–response relationship between the degree of aircraft noise and sleep quality. Of the participants with a normal mental status, the prevalence of sleep disturbance was 2.61-fold higher in the low exposure group and 3.52-fold higher in the high exposure group than in the control group. Conclusion The relationship between aircraft noise and health should be further evaluated through a large-scale follow-up study. PMID:24955321

  5. Median prior constrained TV algorithm for sparse view low-dose CT reconstruction.

    PubMed

    Liu, Yi; Shangguan, Hong; Zhang, Quan; Zhu, Hongqing; Shu, Huazhong; Gui, Zhiguo

    2015-05-01

    It is known that lowering the X-ray tube current (mAs) or tube voltage (kVp) and simultaneously reducing the total number of X-ray views (sparse view) is an effective means to achieve low-dose in computed tomography (CT) scan. However, the associated image quality by the conventional filtered back-projection (FBP) usually degrades due to the excessive quantum noise. Although sparse-view CT reconstruction algorithm via total variation (TV), in the scanning protocol of reducing X-ray tube current, has been demonstrated to be able to result in significant radiation dose reduction while maintain image quality, noticeable patchy artifacts still exist in reconstructed images. In this study, to address the problem of patchy artifacts, we proposed a median prior constrained TV regularization to retain the image quality by introducing an auxiliary vector m in register with the object. Specifically, the approximate action of m is to draw, in each iteration, an object voxel toward its own local median, aiming to improve low-dose image quality with sparse-view projection measurements. Subsequently, an alternating optimization algorithm is adopted to optimize the associative objective function. We refer to the median prior constrained TV regularization as "TV_MP" for simplicity. Experimental results on digital phantoms and clinical phantom demonstrated that the proposed TV_MP with appropriate control parameters can not only ensure a higher signal to noise ratio (SNR) of the reconstructed image, but also its resolution compared with the original TV method. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Application of numerical optimization techniques to control system design for nonlinear dynamic models of aircraft

    NASA Technical Reports Server (NTRS)

    Lan, C. Edward; Ge, Fuying

    1989-01-01

    Control system design for general nonlinear flight dynamic models is considered through numerical simulation. The design is accomplished through a numerical optimizer coupled with analysis of flight dynamic equations. The general flight dynamic equations are numerically integrated and dynamic characteristics are then identified from the dynamic response. The design variables are determined iteratively by the optimizer to optimize a prescribed objective function which is related to desired dynamic characteristics. Generality of the method allows nonlinear effects to aerodynamics and dynamic coupling to be considered in the design process. To demonstrate the method, nonlinear simulation models for an F-5A and an F-16 configurations are used to design dampers to satisfy specifications on flying qualities and control systems to prevent departure. The results indicate that the present method is simple in formulation and effective in satisfying the design objectives.

  7. Significant improvement of the quality of bystander first aid using an expert system with a mobile multimedia device.

    PubMed

    Ertl, Lorenz; Christ, Frank

    2007-08-01

    Better quality bystander first-aid could improve outcome rates for emergency victims significantly. In this case-control study, we hypothesised that expert knowledge presented step-by-step to untrained helpers using a personal digital assistant (PDA), would improve the quality of bystanders basic life support. We confronted 101 lay-helpers with two standard emergency situations. (1) An unconscious trauma victim with severe bleeding. (2) Cardiopulmonary resuscitation (CPR). Performance was assessed using an Objective Structured Clinical Examination (OSCE). One group was supported by a PDA providing visual and audio instructions, whereas the control group acted only with their current knowledge. The expert system was programmed in HTML-code and displayed on the PDA's Internet browser. The maximum score obtainable was 24 points corresponding to optimal treatment. The control group without the PDA reached 14.8+/-3.5 (mean value+/-standard deviation), whereas the PDA supported group scored significantly higher (21.9+/-2.7, p<0.01). The difference in performance was measurable in all criteria tested and particularly notable in the items: placing in recovery position, airway management and quality of CPR. The PDA based expert system increased the performance of untrained helpers supplying emergency care significantly. Since Internet compatible mobile devices have become widely available, a significant quality improvement in bystander first-aid seems possible.

  8. The Effect of the MassHealth Hospital Pay-for-Performance Program on Quality

    PubMed Central

    Ryan, Andrew M; Blustein, Jan

    2011-01-01

    Objective To test the effect of Massachusetts Medicaid's (MassHealth) hospital-based pay-for-performance (P4P) program, implemented in 2008, on quality of care for pneumonia and surgical infection prevention (SIP). Data Hospital Compare process of care quality data from 2004 to 2009 for acute care hospitals in Massachusetts (N = 62) and other states (N = 3,676) and American Hospital Association data on hospital characteristics from 2005. Study Design Panel data models with hospital fixed effects and hospital-specific trends are estimated to test the effect of P4P on composite quality for pneumonia and SIP. This base model is extended to control for the completeness of measure reporting. Further sensitivity checks include estimation with propensity-score matched control hospitals, excluding hospitals in other P4P programs, varying the time period during which the program was assumed to have an effect, and testing the program effect across hospital characteristics. Principal Findings Estimates from our preferred specification, including hospital fixed effects, trends, and the control for measure completeness, indicate small and nonsignificant program effects for pneumonia (−0.67 percentage points, p>.10) and SIP (−0.12 percentage points, p>.10). Sensitivity checks indicate a similar pattern of findings across specifications. Conclusions Despite offering substantial financial incentives, the MassHealth P4P program did not improve quality in the first years of implementation. PMID:21210796

  9. Quality control in the recycling stream of PVC from window frames by hyperspectral imaging

    NASA Astrophysics Data System (ADS)

    Luciani, Valentina; Serranti, Silvia; Bonifazi, Giuseppe; Di Maio, Francesco; Rem, Peter

    2013-05-01

    Polyvinyl chloride (PVC) is one of the most commonly used thermoplastic materials in respect to the worldwide polymer consumption. PVC is mainly used in the building and construction sector, products such as pipes, window frames, cable insulation, floors, coverings, roofing sheets, etc. are realised utilising this material. In recent years, the problem of PVC waste disposal gained increasing importance in the public discussion. The quantity of used PVC items entering the waste stream is gradually increased as progressively greater numbers of PVC products approach to the end of their useful economic lives. The quality of the recycled PVC depends on the characteristics of the recycling process and the quality of the input waste. Not all PVC-containing waste streams have the same economic value. A transparent relation between value and composition is required to decide if the recycling process is cost effective for a particular waste stream. An objective and reliable quality control technique is needed in the recycling industry for the monitoring of both recycled flow streams and final products in the plant. In this work hyperspectral imaging technique in the near infrared (NIR) range (1000-1700 nm) was applied to identify unwanted plastic contaminants and rubber present in PVC coming from windows frame waste in order to assess a quality control procedure during its recycling process. Results showed as PVC, PE and rubber can be identified adopting the NIR-HSI approach.

  10. Adverse Effects of Induced Hot Flashes on Objectively Recorded and Subjectively Reported Sleep: Results of a Gonadotropin-Releasing Hormone Agonist Experimental Protocol

    PubMed Central

    Joffe, Hadine; White, David P.; Crawford, Sybil L.; McCurnin, Kristin E.; Economou, Nicole; Connors, Stephanie; Hall, Janet E.

    2013-01-01

    Objectives The impact of hot flashes on sleep is of great clinical interest, but results are inconsistent, especially when both hot flashes and sleep are measured objectively. Using objective and subjective measurements, we examined the impact of hot flashes on sleep by inducing hot flashes with a gonadotropin-releasing hormone agonist (GnRHa). Methods The GnRHa leuprolide was administered to 20 healthy premenopausal volunteers without hot flashes or sleep disturbances. Induced hot flashes were assessed objectively (skin-conductance monitor) and subjectively (daily diary) during one-month follow-up. Changes from baseline in objective (actigraphy) and subjective sleep quality (Pittsburgh Sleep Quality Index [PSQI]) were compared between women who did and did not develop objective hot flashes, and, in parallel analyses, subjective hot flashes. Results New-onset hot flashes were recorded in 14 (70%) and reported by 14 (70%) women (80% concordance). Estradiol was universally suppressed. Objective sleep efficiency worsened in women with objective hot flashes and improved in women without objective hot flashes (median decrease 2.6%, increase 4.2%, p=0.005). Subjective sleep quality worsened more in those with than without subjective hot flashes (median increase PSQI 2.5 vs. 1.0, p=0.03). Objective hot flashes were not associated with subjective sleep quality, nor were subjective symptoms linked to objective sleep measures. Conclusions This experimental model of induced hot flashes demonstrates a causal relationship between hot flashes and poor sleep quality. Objective hot flashes result in worse objective sleep efficiency, while subjective hot flashes worsen perceived sleep quality. PMID:23481119

  11. Impact of a quality improvement project on deceased organ donor management

    PubMed Central

    Olmos, Andrea; Feiner, John; Hirose, Ryutaro; Swain, Sharon; Blasi, Annabel; Roberts, John P.; Niemann, Claus U.

    2017-01-01

    Context Donors showed poor glucose control in the period between declaration of brain death and organ recovery. The level of hyperglycemia in the donors was associated with a decline in terminal renal function. Objective To determine whether implementation of a quality improvement project improved glucose control and preserved renal function in deceased organ donors. Methods Data collected retrospectively included demographics, medical history, mechanism of death, laboratory values, and data from the United Network for Organ Sharing. Results After implementation of the quality improvement project, deceased donors had significantly lower mean glucose concentrations (mean [SD], 162 [44] vs 212 [42] mg/dL; P < .001) and prerecovery glucose concentration (143 [66] vs 241 [69] mg/dL; P < .001). When the donor cohorts from before and after the quality improvement project were analyzed together, mean glucose concentration remained a significant predictor of terminal creatinine level (P < .001). Multivariate analysis of delayed graft function in kidney recipients matched to donors indicated that higher terminal creatinine level was associated with delayed graft function in recipients (P < .001). Conclusion The quality improvement project improved donor glucose homeostasis, and the data confirm that poor glucose homeostasis is associated with worsening terminal renal function. PMID:26645930

  12. A no-reference video quality assessment metric based on ROI

    NASA Astrophysics Data System (ADS)

    Jia, Lixiu; Zhong, Xuefei; Tu, Yan; Niu, Wenjuan

    2015-01-01

    A no reference video quality assessment metric based on the region of interest (ROI) was proposed in this paper. In the metric, objective video quality was evaluated by integrating the quality of two compressed artifacts, i.e. blurring distortion and blocking distortion. The Gaussian kernel function was used to extract the human density maps of the H.264 coding videos from the subjective eye tracking data. An objective bottom-up ROI extraction model based on magnitude discrepancy of discrete wavelet transform between two consecutive frames, center weighted color opponent model, luminance contrast model and frequency saliency model based on spectral residual was built. Then only the objective saliency maps were used to compute the objective blurring and blocking quality. The results indicate that the objective ROI extraction metric has a higher the area under the curve (AUC) value. Comparing with the conventional video quality assessment metrics which measured all the video quality frames, the metric proposed in this paper not only decreased the computation complexity, but improved the correlation between subjective mean opinion score (MOS) and objective scores.

  13. Estimation of 3D reconstruction errors in a stereo-vision system

    NASA Astrophysics Data System (ADS)

    Belhaoua, A.; Kohler, S.; Hirsch, E.

    2009-06-01

    The paper presents an approach for error estimation for the various steps of an automated 3D vision-based reconstruction procedure of manufactured workpieces. The process is based on a priori planning of the task and built around a cognitive intelligent sensory system using so-called Situation Graph Trees (SGT) as a planning tool. Such an automated quality control system requires the coordination of a set of complex processes performing sequentially data acquisition, its quantitative evaluation and the comparison with a reference model (e.g., CAD object model) in order to evaluate quantitatively the object. To ensure efficient quality control, the aim is to be able to state if reconstruction results fulfill tolerance rules or not. Thus, the goal is to evaluate independently the error for each step of the stereo-vision based 3D reconstruction (e.g., for calibration, contour segmentation, matching and reconstruction) and then to estimate the error for the whole system. In this contribution, we analyze particularly the segmentation error due to localization errors for extracted edge points supposed to belong to lines and curves composing the outline of the workpiece under evaluation. The fitting parameters describing these geometric features are used as quality measure to determine confidence intervals and finally to estimate the segmentation errors. These errors are then propagated through the whole reconstruction procedure, enabling to evaluate their effect on the final 3D reconstruction result, specifically on position uncertainties. Lastly, analysis of these error estimates enables to evaluate the quality of the 3D reconstruction, as illustrated by the shown experimental results.

  14. Effects of different doses of high-speed resistance training on physical performance and quality of life in older women: a randomized controlled trial

    PubMed Central

    Ramirez-Campillo, Rodrigo; Diaz, Daniela; Martinez-Salazar, Cristian; Valdés-Badilla, Pablo; Delgado-Floody, Pedro; Méndez-Rebolledo, Guillermo; Cañas-Jamet, Rodrigo; Cristi-Montero, Carlos; García-Hermoso, Antonio; Celis-Morales, Carlos; Moran, Jason; Buford, Thomas W; Rodriguez-Mañas, Leocadio; Alonso-Martinez, Alicia M; Izquierdo, Mikel

    2016-01-01

    Objective This study aimed to compare the effects of two frequencies of high-speed resistance training (HSRT) on physical performance and quality of life of older women. Methods A total of 24 older women participated in a 12-week HSRT program composed of either two or three sessions/week (equated for volume and intensity). Women were randomized into three arms: a control group (CG, n=8), a resistance training group performing two sessions/week (RT2, n=8), and a resistance training group performing three sessions/week (RT3, n=8). The training program for both experimental groups included exercises that required high-speed concentric muscle actions. Results No baseline differences were observed among groups. Compared with the CG, both training groups showed similar small to moderate improvements (P<0.05) in muscle strength, power, functional performance, balance, and quality of life. Conclusion These results suggest that equated for volume and intensity, two and three training sessions/week of HSRT are equally effective for improving physical performance and quality of life of older women. PMID:28008239

  15. Quality and safety aspects in histopathology laboratory

    PubMed Central

    Adyanthaya, Soniya; Jose, Maji

    2013-01-01

    Histopathology is an art of analyzing and interpreting the shapes, sizes and architectural patterns of cells and tissues within a given specific clinical background and a science by which the image is placed in the context of knowledge of pathobiology, to arrive at an accurate diagnosis. To function effectively and safely, all the procedures and activities of histopathology laboratory should be evaluated and monitored accurately. In histopathology laboratory, the concept of quality control is applicable to pre-analytical, analytical and post-analytical activities. Ensuring safety of working personnel as well as environment is also highly important. Safety issues that may come up in a histopathology lab are primarily those related to potentially hazardous chemicals, biohazardous materials, accidents linked to the equipment and instrumentation employed and general risks from electrical and fire hazards. This article discusses quality management system which can ensure quality performance in histopathology laboratory. The hazards in pathology laboratories and practical safety measures aimed at controlling the dangers are also discussed with the objective of promoting safety consciousness and the practice of laboratory safety. PMID:24574660

  16. Handling Qualities Prediction of an F-16XL-Based Reduced Sonic Boom Aircraft

    NASA Technical Reports Server (NTRS)

    Cogan, Bruce; Yoo, Seung

    2010-01-01

    A major goal of the Supersonics Project under NASA s Fundamental Aeronautics program is sonic boom reduction of supersonic aircraft. An important part of this effort is development and validation of sonic boom prediction tools used in aircraft design. NASA Dryden s F- 16XL was selected as a potential testbed aircraft to provide flight validation. Part of this task was predicting the handling qualities of the modified aircraft. Due to the high cost of modifying the existing F-16XL control laws, it was desirable to find modifications that reduced the aircraft sonic boom but did not degrade baseline aircraft handling qualities allowing for the potential of flight test without changing the current control laws. This was not a requirement for the initial modification design work, but an important consideration for proceeding to the flight test option. The primary objective of this work was to determine an aerodynamic and mass properties envelope of the F-16XL aircraft. The designers could use this envelope to determine the effect of proposed modifications on aircraft handling qualities.

  17. [The Scope, Quality and Safety Requirements of Drug Abuse Testing].

    PubMed

    Küme, Tuncay; Karakükcü, Çiğdem; Pınar, Aslı; Coşkunol, Hakan

    2017-01-01

    The aim of this review is to inform about the scopes and requirements of drug abuse testing. Drug abuse testing is one of the tools for determination of drug use. It must fulfill the quality and safety requirements in judgmental legal and administrative decisions. Drug abuse testing must fulfill some requirements like selection of the appropriate test matrix, appropriate screening test panel, sampling in detection window, patient consent, identification of the donor, appropriate collection site, sample collection with observation, identification and control of the sample, specimen custody chain in preanalytical phase; analysis in authorized laboratories, specimen validity tests, reliable testing METHODS, strict quality control, two-step analysis in analytical phase; storage of the split specimen, confirmation of the split specimen in the objection, result custody chain, appropriate cut-off concentration, the appropriate interpretation of the result in postanalytical phase. The workflow and analytical processes of drug abuse testing are explained in last regulation of the Department of Medical Laboratory Services, Ministry of Health in Turkey. The clinical physicians have to know and apply the quality and safety requirements in drug abuse testing according to last regulations in Turkey.

  18. An experimental evaluation of the Sternberg task as a workload metric for helicopter Flight Handling Qualities (FHQ) research

    NASA Technical Reports Server (NTRS)

    Hemingway, J. C.

    1984-01-01

    The objective was to determine whether the Sternberg item-recognition task, employed as a secondary task measure of spare mental capacity for flight handling qualities (FHQ) simulation research, could help to differentiate between different flight-control conditions. FHQ evaluations were conducted on the Vertical Motion Simulator at Ames Research Center to investigate different primary flight-control configurations, and selected stability and control augmentation levels for helicopters engaged in low-level flight regimes. The Sternberg task was superimposed upon the primary flight-control task in a balanced experimental design. The results of parametric statistical analysis of Sternberg secondary task data failed to support the continued use of this task as a measure of pilot workload. In addition to the secondary task, subjects provided Cooper-Harper pilot ratings (CHPR) and responded to workload questionnaire. The CHPR data also failed to provide reliable statistical discrimination between FHQ treatment conditions; some insight into the behavior of the secondary task was gained from the workload questionnaire data.

  19. Adaptive Harmonic Detection Control of Grid Interfaced Solar Photovoltaic Energy System with Power Quality Improvement

    NASA Astrophysics Data System (ADS)

    Singh, B.; Goel, S.

    2015-03-01

    This paper presents a grid interfaced solar photovoltaic (SPV) energy system with a novel adaptive harmonic detection control for power quality improvement at ac mains under balanced as well as unbalanced and distorted supply conditions. The SPV energy system is capable of compensation of linear and nonlinear loads with the objectives of load balancing, harmonics elimination, power factor correction and terminal voltage regulation. The proposed control increases the utilization of PV infrastructure and brings down its effective cost due to its other benefits. The adaptive harmonic detection control algorithm is used to detect the fundamental active power component of load currents which are subsequently used for reference source currents estimation. An instantaneous symmetrical component theory is used to obtain instantaneous positive sequence point of common coupling (PCC) voltages which are used to derive inphase and quadrature phase voltage templates. The proposed grid interfaced PV energy system is modelled and simulated in MATLAB Simulink and its performance is verified under various operating conditions.

  20. The Sternberg Task as a Workload Metric in Flight Handling Qualities Research

    NASA Technical Reports Server (NTRS)

    Hemingway, J. C.

    1984-01-01

    The objective of this research was to determine whether the Sternberg item-recognition task, employed as a secondary task measure of spare mental capacity for flight handling qualities (FHQ) simulation research, could help to differentiate between different flight-control conditions. FHQ evaluations were conducted on the Vertical Motion Simulator at Ames Research Center to investigate different primary flight-control configurations, and selected stability and control augmentation levels for helicopers engaged in low-level flight regimes. The Sternberg task was superimposed upon the primary flight-control task in a balanced experimental design. The results of parametric statistical analysis of Sternberg secondary task data failed to support the continued use of this task as a measure of pilot workload. In addition to the secondary task, subjects provided Cooper-Harper pilot ratings (CHPR) and responded to a workload questionnaire. The CHPR data also failed to provide reliable statistical discrimination between FHQ treatment conditions; some insight into the behavior of the secondary task was gained from the workload questionnaire data.

  1. Joint Optics Structures Experiment (JOSE)

    NASA Technical Reports Server (NTRS)

    Founds, David

    1987-01-01

    The objectives of the JOSE program is to develop, demonstrate, and evaluate active vibration suppression techniques for Directed Energy Weapons (DEW). DEW system performance is highly influenced by the line-of-sight (LOS) stability and in some cases by the wave front quality. The missions envisioned for DEW systems by the Strategic Defense Initiative require LOS stability and wave front quality to be significantly improved over any current demonstrated capability. The Active Control of Space Structures (ACOSS) program led to the development of a number of promising structural control techniques. DEW structures are vastly more complex than any structures controlled to date. They will be subject to disturbances with significantly higher magnitudes and wider bandwidths, while holding higher tolerances on allowable motions and deformations. Meeting the performance requirements of the JOSE program requires upgrading the ACOSS techniques to meet new more stringent requirements, the development of requisite sensors and acturators, improved control processors, highly accurate system identification methods, and the integration of hardware and methodologies into a successful demonstration.

  2. Sci-Fri AM: Quality, Safety, and Professional Issues 01: CPQR Technical Quality Control Suite Development including Quality Control Workload Results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malkoske, Kyle; Nielsen, Michelle; Brown, Erika

    A close partnership between the Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) has resulted in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. The framework includes consolidation of existing guidelines and/or literature by expert reviewers, structured stages of public review, external field-testing and ratification by COMP. The adopted framework for the development and maintenance of themore » TQCs ensures the guidelines incorporate input from the medical physics community during development, measures the workload required to perform the QC tests outlined in each TQC, and remain relevant (i.e. “living documents”) through subsequent planned reviews and updates. This presentation will show the Multi-Leaf Linear Accelerator document as an example of how feedback and cross-national work to achieve a robust guidance document. During field-testing, each technology was tested at multiple centres in a variety of clinic environments. As part of the defined feedback, workload data was captured. This lead to average time associated with testing as defined in each TQC document. As a result, for a medium-sized centre comprising 6 linear accelerators and a comprehensive brachytherapy program, we evaluate the physics workload to 1.5 full-time equivalent physicist per year to complete all QC tests listed in this suite.« less

  3. Application of microscopy technique and high-performance liquid chromatography for quality assessment of the flower bud of Tussilago farfara L. (Kuandonghua)

    PubMed Central

    Li, Da; Liang, Li; Zhang, Jing; Kang, Tingguo

    2015-01-01

    Background: Quality control is one of the bottleneck problems limiting the application and development of traditional Chinese medicine (TCM). In recent years, microscopy and high-performance liquid chromatography (HPLC) techniques have been frequently applied in the quality control of TCM. However, studies combining conventional microscopy and HPLC techniques for the quality control of the flower bud of Tussilago farfara L. (Kuandonghua) have not been reported. Objective: This study was undertaken to evaluate the quality of the flower bud of T. farfara L. and to establish the relationships between the quantity of pollen grains and four main bioactive constituents: tussilagone, chlorogenic acid, rutin and isoquercitrin. Materials and Methods: In this study, microscopic examination was used to quantify microscopic characteristics of the flower bud of T. farfara L., and the chemical components were determined by HPLC. The data were analyzed by Statistical Package for the Social Sciences statistics software. Results: The results of the analysis showed that tussilagone, chlorogenic acid, rutin and isoquercitrin were significantly correlated with the quantity of pollen grains in the flower bud of T. farfara L. There is a positive correlation between them. From these results, it can be deduced that the flower bud of T. farfara L. with a greater quantity of pollen grains should be of better quality. Conclusion: The study showed that the established method can be helpful for evaluating the quality of the flower bud of T. farfara L. based on microscopic characteristic constants and chemical quantitation. PMID:26246737

  4. The business case for quality improvement: oral anticoagulation for atrial fibrillation.

    PubMed

    Rose, Adam J; Berlowitz, Dan R; Ash, Arlene S; Ozonoff, Al; Hylek, Elaine M; Goldhaber-Fiebert, Jeremy D

    2011-07-01

    The potential to save money within a short time frame provides a more compelling "business case" for quality improvement than merely demonstrating cost-effectiveness. Our objective was to demonstrate the potential for cost savings from improved control in patients anticoagulated for atrial fibrillation. Our population consisted of 67 077 Veterans Health Administration patients anticoagulated for atrial fibrillation between October 1, 2006, and September 30, 2008. We simulated the number of adverse events and their associated costs and utilities, both before and after various degrees of improvement in percent time in therapeutic range (TTR). The simulation had a 2-year time horizon, and costs were calculated from the perspective of the payer. In the base-case analysis, improving TTR by 5% prevented 1114 adverse events, including 662 deaths; it gained 863 quality-adjusted life-years and saved $15.9 million compared with the status quo, not accounting for the cost of the quality improvement program. Improving TTR by 10% prevented 2087 events, gained 1606 quality-adjusted life-years, and saved $29.7 million. In sensitivity analyses, costs were most sensitive to the estimated risk of stroke and the expected stroke reduction from improved TTR. Utilities were most sensitive to the estimated risk of death and the expected mortality benefit from improved TTR. A quality improvement program to improve anticoagulation control probably would be cost-saving for the payer, even if it were only modestly effective in improving control and even without considering the value of improved health. This study demonstrates how to make a business case for a quality improvement initiative.

  5. SHERPA: an image segmentation and outline feature extraction tool for diatoms and other objects

    PubMed Central

    2014-01-01

    Background Light microscopic analysis of diatom frustules is widely used both in basic and applied research, notably taxonomy, morphometrics, water quality monitoring and paleo-environmental studies. In these applications, usually large numbers of frustules need to be identified and/or measured. Although there is a need for automation in these applications, and image processing and analysis methods supporting these tasks have previously been developed, they did not become widespread in diatom analysis. While methodological reports for a wide variety of methods for image segmentation, diatom identification and feature extraction are available, no single implementation combining a subset of these into a readily applicable workflow accessible to diatomists exists. Results The newly developed tool SHERPA offers a versatile image processing workflow focused on the identification and measurement of object outlines, handling all steps from image segmentation over object identification to feature extraction, and providing interactive functions for reviewing and revising results. Special attention was given to ease of use, applicability to a broad range of data and problems, and supporting high throughput analyses with minimal manual intervention. Conclusions Tested with several diatom datasets from different sources and of various compositions, SHERPA proved its ability to successfully analyze large amounts of diatom micrographs depicting a broad range of species. SHERPA is unique in combining the following features: application of multiple segmentation methods and selection of the one giving the best result for each individual object; identification of shapes of interest based on outline matching against a template library; quality scoring and ranking of resulting outlines supporting quick quality checking; extraction of a wide range of outline shape descriptors widely used in diatom studies and elsewhere; minimizing the need for, but enabling manual quality control and corrections. Although primarily developed for analyzing images of diatom valves originating from automated microscopy, SHERPA can also be useful for other object detection, segmentation and outline-based identification problems. PMID:24964954

  6. SHERPA: an image segmentation and outline feature extraction tool for diatoms and other objects.

    PubMed

    Kloster, Michael; Kauer, Gerhard; Beszteri, Bánk

    2014-06-25

    Light microscopic analysis of diatom frustules is widely used both in basic and applied research, notably taxonomy, morphometrics, water quality monitoring and paleo-environmental studies. In these applications, usually large numbers of frustules need to be identified and/or measured. Although there is a need for automation in these applications, and image processing and analysis methods supporting these tasks have previously been developed, they did not become widespread in diatom analysis. While methodological reports for a wide variety of methods for image segmentation, diatom identification and feature extraction are available, no single implementation combining a subset of these into a readily applicable workflow accessible to diatomists exists. The newly developed tool SHERPA offers a versatile image processing workflow focused on the identification and measurement of object outlines, handling all steps from image segmentation over object identification to feature extraction, and providing interactive functions for reviewing and revising results. Special attention was given to ease of use, applicability to a broad range of data and problems, and supporting high throughput analyses with minimal manual intervention. Tested with several diatom datasets from different sources and of various compositions, SHERPA proved its ability to successfully analyze large amounts of diatom micrographs depicting a broad range of species. SHERPA is unique in combining the following features: application of multiple segmentation methods and selection of the one giving the best result for each individual object; identification of shapes of interest based on outline matching against a template library; quality scoring and ranking of resulting outlines supporting quick quality checking; extraction of a wide range of outline shape descriptors widely used in diatom studies and elsewhere; minimizing the need for, but enabling manual quality control and corrections. Although primarily developed for analyzing images of diatom valves originating from automated microscopy, SHERPA can also be useful for other object detection, segmentation and outline-based identification problems.

  7. Massage therapy for patients with metastatic cancer: a pilot randomized controlled trial.

    PubMed

    Toth, Maria; Marcantonio, Edward R; Davis, Roger B; Walton, Tracy; Kahn, Janet R; Phillips, Russell S

    2013-07-01

    The study objectives were to determine the feasibility and effects of providing therapeutic massage at home for patients with metastatic cancer. This was a randomized controlled trial. Patients were enrolled at Oncology Clinics at a large urban academic medical center; massage therapy was provided in patients' homes. Subjects were patients with metastatic cancer. There were three interventions: massage therapy, no-touch intervention, and usual care. Primary outcomes were pain, anxiety, and alertness; secondary outcomes were quality of life and sleep. In this study, it was possible to provide interventions for all patients at home by professional massage therapists. The mean number of massage therapy sessions per patient was 2.8. A significant improvement was found in the quality of life of the patients who received massage therapy after 1-week follow-up, which was not observed in either the No Touch control or the Usual Care control groups, but the difference was not sustained at 1 month. There were trends toward improvement in pain and sleep of the patients after therapeutic massage but not in patients in the control groups. There were no serious adverse events related to the interventions. The study results showed that it is feasible to provide therapeutic massage at home for patients with advanced cancer, and to randomize patients to a no-touch intervention. Providing therapeutic massage improves the quality of life at the end of life for patients and may be associated with further beneficial effects, such as improvement in pain and sleep quality. Larger randomized controlled trials are needed to substantiate these findings.

  8. Postharvest control of western flower thrips (Thysanoptera: Thripidae) and California red scale (Hemiptera: Diaspididae) with ethyl formate and its impact on citrus fruit quality.

    PubMed

    Pupin, Francine; Bikoba, Veronique; Biasi, William B; Pedroso, Gabriel M; Ouyang, Yuling; Grafton-Cardwell, Elizabeth E; Mitcham, Elizabeth J

    2013-12-01

    The postharvest control of arthropod pests is a challenge that the California citrus industry must overcome when exporting fruit overseas. Currently, methyl bromide fumigation is used to control postharvest pests on exported citrus, but it may soon be unavailable because of use restrictions and cost of this health-hazard ozone-depleting chemical. Ethyl formate is a natural plant volatile and possible alternative to methyl bromide in postharvest insect control. The objectives of this study were 1) to evaluate the mortality of third instar California red scale [Aonidiella aurantii (Maskell)] (Hemiptera: Diaspididae) and adult western flower thrips [Frankliniella occidentalis (Pergande)] (Thysanoptera: Thripidae) under a wide range of ethyl formate concentrations, 2) to determine the ethyl formate concentration required to reach a Probit 9 level of control for both pests, and 3) to test the effects of ethyl formate fumigation on the quality of navel oranges [Citrus sinensis (L.) Osbeck] and lemons [Citrus limon (L.) Burman f.] at 24 h after fumigation, and at different time periods to simulate shipping plus storage (5 wk at 5 degrees C), and shipping, storage, handling, and shelf-life (5 wk at 5 degrees C, plus 5 d at 15 degrees C, and 2 d at 20 degrees C). The results indicate that ethyl formate is a promising alternative to methyl bromide for the California citrus industry, because of successful control of adult western flower thips and third instar California red scale and no deleterious effect on fruit quality at any of the evaluated periods and quality parameters.

  9. The influence of familiar characters and other appealing images on young children's preference for low-quality objects.

    PubMed

    Danovitch, Judith H; Mills, Candice M

    2017-09-01

    This study examines the factors underlying young children's preference for products bearing a familiar character's image. Three-year-olds (N = 92) chose between low-quality objects with images on or near the objects and high-quality objects without images. Children showed stronger preferences for damaged objects bearing images of a preferred familiar character than for objects bearing images of a preferred colour star, and they showed weak preferences for damaged objects with the character near, but not on, the object. The results suggest that children's preference for low-quality products bearing character images is driven by prior exposure to characters, and not only by the act of identifying a favourite. Statement of contribution What is already known on this subject? Children are exposed to characters in the media and on products such as clothing and school supplies. Products featuring familiar characters appeal to preschool children, even if they are of low quality. What does this study add? Three-year-olds prefer damaged objects with an image of a favourite character over plain undamaged objects. Children's preference is not solely a function of having identified a favourite image or of attentional cues. © 2017 The British Psychological Society.

  10. Improving plan quality for prostate volumetric-modulated arc therapy.

    PubMed

    Wright, Katrina; Ferrari-Anderson, Janet; Barry, Tamara; Bernard, Anne; Brown, Elizabeth; Lehman, Margot; Pryor, David

    2017-01-01

    We critically evaluated the quality and consistency of volumetric-modulated arc therapy (VMAT) prostate planning at a single institution to quantify objective measures for plan quality and establish clear guidelines for plan evaluation and quality assurance. A retrospective analysis was conducted on 34 plans generated on the Pinnacle 3 version 9.4 and 9.8 treatment planning system to deliver 78 Gy in 39 fractions to the prostate only using VMAT. Data were collected on contoured structure volumes, overlaps and expansions, planning target volume (PTV) and organs at risk volumes and relationship, dose volume histogram, plan conformity, plan homogeneity, low-dose wash, and beam parameters. Standard descriptive statistics were used to describe the data. Despite a standardized planning protocol, we found variability was present in all steps of the planning process. Deviations from protocol contours by radiation oncologists and radiation therapists occurred in 12% and 50% of cases, respectively, and the number of optimization parameters ranged from 12 to 27 (median 17). This contributed to conflicts within the optimization process reflected by the mean composite objective value of 0.07 (range 0.01 to 0.44). Methods used to control low-intermediate dose wash were inconsistent. At the PTV rectum interface, the dose-gradient distance from the 74.1 Gy to 40 Gy isodose ranged from 0.6 cm to 2.0 cm (median 1.0 cm). Increasing collimator angle was associated with a decrease in monitor units and a single full 6 MV arc was sufficient for the majority of plans. A significant relationship was found between clinical target volume-rectum distance and rectal tolerances achieved. A linear relationship was determined between the PTV volume and volume of 40 Gy isodose. Objective values and composite objective values were useful in determining plan quality. Anatomic geometry and overlap of structures has a measurable impact on the plan quality achieved for prostate patients being treated with VMAT. By evaluating multiple planning variables, we have been able to determine important factors influencing plan quality and develop predictive models for quality metrics that have been incorporated into our new protocol and will be tested and refined in future studies. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

  11. Perception of faces in schizophrenia: Subjective (self-report) vs. objective (psychophysics) assessments

    PubMed Central

    Chen, Yue; Ekstrom, Tor

    2016-01-01

    Objectives Face perception impairment in schizophrenia has been demonstrated, mostly through experimental studies. How this laboratory-defined behavioral impairment is associated with patients’ perceptual experience of various faces in everyday life is however unclear. This question is important because a first-person account of face perception has direct consequences on social functioning of patients. In this study, we adapted and administered a self-reported questionnaire on narrative perceptual experience of faces along with psychophysical assessments of face perception in schizophrenia. Methods The self-reported questionnaire includes six rating items of face-related functioning in everyday life, providing a subjective measure of face perception. The psychophysical assessment determines perceptual threshold for discriminating different facial identities, providing an objective measure of face perception. Results Compared to controls (n=25), patients (n=35) showed significantly lower scores (worse performance) in the subjective assessment and significantly higher thresholds (worse performance) in the objective assessment. The subjective and objective face perception assessments were moderately correlated in controls but not in patients. The subjective face perception assessments were significantly correlated with measurements of a social cognitive ability (Theory of Mind), again in controls but not in patients. Conclusion These results suggest that in schizophrenia the quality of face-related functioning in everyday life is degraded and the role that basic face discrimination capacity plays in face-related everyday functioning is disrupted. PMID:26938027

  12. Non-visual spatial tasks reveal increased interactions with stance postural control.

    PubMed

    Woollacott, Marjorie; Vander Velde, Timothy

    2008-05-07

    The current investigation aimed to contrast the level and quality of dual-task interactions resulting from the combined performance of a challenging primary postural task and three specific, yet categorically dissociated, secondary central executive tasks. Experiments determined the extent to which modality (visual vs. auditory) and code (non-spatial vs. spatial) specific cognitive resources contributed to postural interference in young adults (n=9) in a dual-task setting. We hypothesized that the different forms of executive n-back task processing employed (visual-object, auditory-object and auditory-spatial) would display contrasting levels of interactions with tandem Romberg stance postural control, and that interactions within the spatial domain would be revealed as most vulnerable to dual-task interactions. Across all cognitive tasks employed, including auditory-object (aOBJ), auditory-spatial (aSPA), and visual-object (vOBJ) tasks, increasing n-back task complexity produced correlated increases in verbal reaction time measures. Increasing cognitive task complexity also resulted in consistent decreases in judgment accuracy. Postural performance was significantly influenced by the type of cognitive loading delivered. At comparable levels of cognitive task difficulty (n-back demands and accuracy judgments) the performance of challenging auditory-spatial tasks produced significantly greater levels of postural sway than either the auditory-object or visual-object based tasks. These results suggest that it is the employment of limited non-visual spatially based coding resources that may underlie previously observed visual dual-task interference effects with stance postural control in healthy young adults.

  13. Pilot randomised trial of a healthy eating behavioural intervention in uncontrolled asthma.

    PubMed

    Ma, Jun; Strub, Peg; Lv, Nan; Xiao, Lan; Camargo, Carlos A; Buist, A Sonia; Lavori, Philip W; Wilson, Sandra R; Nadeau, Kari C; Rosas, Lisa G

    2016-01-01

    Rigorous research on the benefit of healthy eating patterns for asthma control is lacking.We randomised 90 adults with objectively confirmed uncontrolled asthma and a low-quality diet (Dietary Approaches to Stop Hypertension (DASH) scores <6 out of 9) to a 6-month DASH behavioural intervention (n=46) or usual-care control (n=44). Intention-to-treat analyses used repeated-measures mixed models.Participants were middle-aged, 67% female and multiethnic. Compared with controls, intervention participants improved on DASH scores (mean change (95% CI) 0.6 (0, 1.1) versus -0.3 (-0.8, 0.2); difference 0.8 (0.2, 1.5)) and the primary outcome, Asthma Control Questionnaire scores (-0.2 (-0.5, 0) versus 0 (-0.3, 0.3); difference -0.2 (-0.5, 0.1)) at 6 months. The mean group differences in changes in Mini Asthma Quality of Life Questionnaire overall and subdomain scores consistently favoured the intervention over the control group: overall 0.4 (95% CI 0, 0.8), symptoms 0.5 (0, 0.9), environment 0.4 (-0.1, 1.0), emotions 0.4 (-0.2, 0.9) and activities 0.3 (0, 0.7). These differences were modest, but potentially clinical significant.The DASH behavioural intervention improved diet quality with promising clinical benefits for better asthma control and functional status among adults with uncontrolled asthma. A full-scale efficacy trial is warranted. Copyright ©ERS 2016.

  14. Urbanization in Pearl River Delta area in past 20 years: remote sensing of impact on water quality

    NASA Astrophysics Data System (ADS)

    Wang, Yunpeng; Fan, Fenglei; Zhang, Jinqu; Xia, Hao; Ye, Chun

    2004-11-01

    The Pearl River Delta of Guangdong province in China is one of the world"s largest growths in urbanization for the past 20 years. The objective of this research is to explore the relationship between urbanization and water quality in this area. Present and past remote sensing data including MSS< TM/ETM and ASTER are used to research the urbanization and its impact on water quality. Land use and water quality information are extracted from remote sensing data. Data of population, industrial and agricultural productivity indices are integrated with the thematic maps derived from remote sensing data by GIS method. Spatial analysis methods are applied on these data and the results indicate that population, waste water both from household and industrial and chemical fertilizer consumptions are main controls of the regional water quality and environment.

  15. Sexual Minority Women's Health Behaviors and Outcomes After Breast Cancer.

    PubMed

    Boehmer, Ulrike; Ozonoff, Al; Potter, Jennifer

    2015-09-01

    Sexual minority women (e.g., lesbians, bisexual women, and women who prefer a female partner) are a known risk population for overweight, obesity, and mental health problems. Our objective is to compare sexual minority women with breast cancer to a control sample of sexual minority women without cancer to identify differences in healthful lifestyle practices, weight, well-being and mental health. This is a cross-sectional study of 85 sexual minority women with a breast cancer history (cases) matched by age and partner status to 85 sexual minority controls without cancer. We compared self-reported physical activity, fruit and vegetable intake, weight, quality of life, anxiety, and depression. Cases and controls had similar health behaviors, BMI, quality of life, anxiety, and depression. Of the weight-related behaviors, meeting the recommended guidelines of physical activity was significantly associated with lower likelihood of being overweight or obese, less depression, and better mental quality of life. Sexual minority women with breast cancer are similar to sexual minority women without cancer with respect to healthful behaviors, body weight, anxiety, depression, and quality of life. Lifestyle interventions to reduce the risk of poor outcomes after cancer should be implemented in this population as well as in sexual minority women without cancer.

  16. Ultra-performance liquid chromatography fingerprinting for quality control of Phragmitis rhizoma (Lugen) produced in Baiyangdian

    PubMed Central

    Li, Hong; Gao, Yu-Mei; Zhang, Jing; Wang, Lin; Wang, Xiao-Xin

    2013-01-01

    Objective: To establish an ultra-performance liquid chromatography (UPLC) fingerprinting method for quality control of Phragmitis rhizoma from Baiyangdian. Materials and Methods: Ultrasonic extraction with 70% methanol was performed on 10 samples of P. rhizoma collected from 10 different villages in Baiyangdian. The sample solutions were analyzed by Waters UPLC equipped with the ACQUITY UPLC BEH C18 column and photodiode array (PDA) detector, and gradient eluted with acetonitrile/water as the mobile phase. The flow rate was set to 0.1 mL/min; the column temperature was set to 25°C; and the detection wavelength was set to 285 nm. Results: The chromatograms of the 10 samples showed 27 common peaks, of which one was identified as the ferulic acid standard. The similarity indexes were all above 0.82. Hierarchical cluster analysis showed that the constituents and their quantities differed according to the diameter of the original plant, which is related to its age. Conclusion: The UPLC fingerprinting method had the advantages of being fast, accurate, and highly efficient; this indicated that it can be used for quality control of P. rhizoma produced in Baiyangdian. Also, the relation between the quality and diameter/age of the plant needs to be further investigated. PMID:24124278

  17. The effect of real-time CPR feedback and post event debriefing on patient and processes focused outcomes: a cohort study: trial protocol.

    PubMed

    Perkins, Gavin D; Davies, Robin P; Quinton, Sarah; Woolley, Sarah; Gao, Fang; Abella, Ben; Stallard, Nigel; Cooke, Matthew W

    2011-10-18

    Cardiac arrest affects 30-35, 000 hospitalised patients in the UK every year. For these patients to be given the best chance of survival, high quality cardiopulmonary resuscitation (CPR) must be delivered, however the quality of CPR in real-life is often suboptimal. CPR feedback devices have been shown to improve CPR quality in the pre-hospital setting and post-event debriefing can improve adherence to guidelines and CPR quality. However, the evidence for use of these improvement methods in hospital remains unclear. The CPR quality improvement initiative is a prospective cohort study of the Q-CPR real-time feedback device combined with post-event debriefing in hospitalised adult patients who sustain a cardiac arrest. The primary objective of this trial is to assess whether a CPR quality improvement initiative will improve rate of return of sustained spontaneous circulation in in-hospital-cardiac-arrest patients. The study is set in one NHS trust operating three hospital sites. Secondary objectives will evaluate: any return of spontaneous circulation; survival to hospital discharge and patient cerebral performance category at discharge; quality of CPR variables and cardiac arrest team factors. All three sites will have an initial control phase before any improvements are implemented; site 1 will implement audiovisual feedback combined with post event debriefing, site 2 will implement audiovisual feedback only and site 3 will remain as a control site to measure any changes in outcome due to any other trust-wide changes in resuscitation practice. All adult patients sustaining a cardiac arrest and receiving resuscitation from the hospital cardiac arrest team will be included. Patients will be excluded if; they have a Do-not-attempt resuscitation order written and documented in their medical records, the cardiac arrest is not attended by a resuscitation team, the arrest occurs out-of-hospital or the patient has previously participated in this study. The trial will recruit a total of 912 patients from the three hospital sites. This trial will evaluate patient and process focussed outcomes following the implementation of a CPR quality improvement initiative using real-time audiovisual feedback and post event debriefing. ISRCTN56583860.

  18. Image-guided radiotherapy quality control: Statistical process control using image similarity metrics.

    PubMed

    Shiraishi, Satomi; Grams, Michael P; Fong de Los Santos, Luis E

    2018-05-01

    The purpose of this study was to demonstrate an objective quality control framework for the image review process. A total of 927 cone-beam computed tomography (CBCT) registrations were retrospectively analyzed for 33 bilateral head and neck cancer patients who received definitive radiotherapy. Two registration tracking volumes (RTVs) - cervical spine (C-spine) and mandible - were defined, within which a similarity metric was calculated and used as a registration quality tracking metric over the course of treatment. First, sensitivity to large misregistrations was analyzed for normalized cross-correlation (NCC) and mutual information (MI) in the context of statistical analysis. The distribution of metrics was obtained for displacements that varied according to a normal distribution with standard deviation of σ = 2 mm, and the detectability of displacements greater than 5 mm was investigated. Then, similarity metric control charts were created using a statistical process control (SPC) framework to objectively monitor the image registration and review process. Patient-specific control charts were created using NCC values from the first five fractions to set a patient-specific process capability limit. Population control charts were created using the average of the first five NCC values for all patients in the study. For each patient, the similarity metrics were calculated as a function of unidirectional translation, referred to as the effective displacement. Patient-specific action limits corresponding to 5 mm effective displacements were defined. Furthermore, effective displacements of the ten registrations with the lowest similarity metrics were compared with a three dimensional (3DoF) couch displacement required to align the anatomical landmarks. Normalized cross-correlation identified suboptimal registrations more effectively than MI within the framework of SPC. Deviations greater than 5 mm were detected at 2.8σ and 2.1σ from the mean for NCC and MI, respectively. Patient-specific control charts using NCC evaluated daily variation and identified statistically significant deviations. This study also showed that subjective evaluations of the images were not always consistent. Population control charts identified a patient whose tracking metrics were significantly lower than those of other patients. The patient-specific action limits identified registrations that warranted immediate evaluation by an expert. When effective displacements in the anterior-posterior direction were compared to 3DoF couch displacements, the agreement was ±1 mm for seven of 10 patients for both C-spine and mandible RTVs. Qualitative review alone of IGRT images can result in inconsistent feedback to the IGRT process. Registration tracking using NCC objectively identifies statistically significant deviations. When used in conjunction with the current image review process, this tool can assist in improving the safety and consistency of the IGRT process. © 2018 American Association of Physicists in Medicine.

  19. Strategies of performance self-monitoring in automotive production.

    PubMed

    Faye, Hélène; Falzon, Pierre

    2009-09-01

    Production in the automotive industry, based on assembly line work, is now characterized by lean manufacturing and customization. This results in greater flexibility and increased quality demands, including worker performance self-monitoring. The objectives of this study are to refine the concept of performance self-monitoring and to characterize the strategies developed by operators to achieve it. Data were collected based on the method of individual auto-confrontation, consisting of two steps: eleven assembly-line operators of a French automotive company were individually observed and video-taped while they were working; an interview then allowed each operator to discuss his/her activity based on the video-tape. This study expands the concept of performance self-monitoring by highlighting three types of strategies directly oriented toward quality: prevention, feedback control and control action strategies.

  20. Air-insufflated high-definition dacryoendoscopy yields significantly better image quality than conventional dacryoendoscopy.

    PubMed

    Sasaki, Tsugihisa; Sounou, Tsutomu; Tsuji, Hideki; Sugiyama, Kazuhisa

    2017-01-01

    To facilitate the analysis of lacrimal conditions, we utilized high-definition dacryoendoscopy (HDD) and undertook observations with a pressure-controlled air-insufflation system. We report the safety and performance of HDD. In this retrospective, non-randomized clinical trial, 46 patients (14 males and 32 females; age range 39-91 years; mean age ± SD 70.3±12.0 years) who had lacrimal disorders were examined with HDD and conventional dacryoendoscopy (CD). The high-definition dacryoendoscope had 15,000 picture element image fibers and an advanced objective lens. Its outer diameter was 0.9-1.2 mm. Air insufflation was controlled at 0-20 kPa with a digital manometer-based pressure-controlled air-insufflation system to evaluate the quality of the image. The HDD had an air/saline irrigation channel between the outer sheath (outer diameter =1.2 mm) and the metal inner sheath of the endoscope. We used it and the CD in air, saline, and diluted milk saline with and without manual irrigation to quantitatively evaluate the effect of air pressure and saline irrigation on image quality. In vivo, the most significant improvement in image quality was demonstrated with air-insufflated (5-15 kPa) HDD, as compared with saline-irrigated HDD and saline-irrigated CD. No emphysema or damage was noted under observation with HDD. In vitro, no significant difference was demonstrated between air-insufflated HDD and saline-irrigated HDD. In vitro, the image quality of air-insufflated HDD was significantly improved as compared with that of saline-irrigated CD. Pressure-controlled (5-15 kPa) air-insufflated HDD is safe, and yields significantly better image quality than CD and saline-irrigated HDD.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top