Humanoid Robotics: Real-Time Object Oriented Programming

NASA Technical Reports Server (NTRS)

Newton, Jason E.

2005-01-01

Programming of robots in today's world is often done in a procedural oriented fashion, where object oriented programming is not incorporated. In order to keep a robust architecture allowing for easy expansion of capabilities and a truly modular design, object oriented programming is required. However, concepts in object oriented programming are not typically applied to a real time environment. The Fujitsu HOAP-2 is the test bed for the development of a humanoid robot framework abstracting control of the robot into simple logical commands in a real time robotic system while allowing full access to all sensory data. In addition to interfacing between the motor and sensory systems, this paper discusses the software which operates multiple independently developed control systems simultaneously and the safety measures which keep the humanoid from damaging itself and its environment while running these systems. The use of this software decreases development time and costs and allows changes to be made while keeping results safe and predictable.

Objective speech quality evaluation of real-time speech coders

NASA Astrophysics Data System (ADS)

Viswanathan, V. R.; Russell, W. H.; Huggins, A. W. F.

1984-02-01

This report describes the work performed in two areas: subjective testing of a real-time 16 kbit/s adaptive predictive coder (APC) and objective speech quality evaluation of real-time coders. The speech intelligibility of the APC coder was tested using the Diagnostic Rhyme Test (DRT), and the speech quality was tested using the Diagnostic Acceptability Measure (DAM) test, under eight operating conditions involving channel error, acoustic background noise, and tandem link with two other coders. The test results showed that the DRT and DAM scores of the APC coder equalled or exceeded the corresponding test scores fo the 32 kbit/s CVSD coder. In the area of objective speech quality evaluation, the report describes the development, testing, and validation of a procedure for automatically computing several objective speech quality measures, given only the tape-recordings of the input speech and the corresponding output speech of a real-time speech coder.

Determinants of Three-Year Change in Children’s Objectively Measured Sedentary Time

PubMed Central

Foley, Louise; Corder, Kirsten; Ekelund, Ulf; van Sluijs, Esther M. F.

2016-01-01

Background Sedentary behaviours (SB) are highly prevalent in young people and may be adversely associated with physical and mental health. Understanding of the modifiable determinants of SB is necessary to inform the design of behaviour change interventions but much of the existing research is cross-sectional and focussed upon screen-based behaviours. Purpose To examine the social, psychological and environmental determinants of change in children’s objectively measured sedentary time from age 11 to 14 years. Methods Data are from the second (2008) and third (2011) waves of assessment in the Sport, Physical Activity, and Eating Behaviour: Environmental Determinants in Young People (SPEEDY) study, conducted in the county of Norfolk, United Kingdom. Longitudinal data on accelerometer assessed sedentary time were available for 316 (53.5% female, 11.2±0.3 years at baseline) and 264 children after-school and at the weekend respectively. Information on 14 candidate determinants, including school travel mode and electronic media ownership, was self-reported. Change in the proportion of registered time spent sedentary was used as the outcome variable in cross-classified linear regression models, adjusted for age, sex, body mass index and baseline sedentary time. Simple and multiple models were run and interactions with sex explored. Results Daily sedentary time increased by 30–40 minutes after-school and at the weekend from baseline to follow-up. Participants who travelled to school by cycle exhibited smaller increases in after-school sedentary time (beta; 95%CI for change in % time spent sedentary: -3.3;-6.7,-0.07). No significant determinants of change in weekend sedentary time were identified. Conclusions Time spent sedentary increased during the three-year duration of follow-up but few of the variables examined were significantly associated with changes in sedentary time. Children’s mode of school travel may influence changes in their sedentary time over this

Associations between organized sports participation and objectively measured physical activity, sedentary time and weight status in youth.

PubMed

Marques, Adilson; Ekelund, Ulf; Sardinha, Luís B

2016-02-01

The purpose of this study was to examine whether participation in organized sports is related to achieving physical activity recommendations, body mass index (BMI), objectively measured PA intensity and time spent sedentary. Cross-sectional study. The sample comprised 973 children and adolescents (427 boys, 546 girls) aged 10-18 years (Mage=14.1±2.4). Organized sport was self-reported. Physical activity and time spent in moderate and vigorous intensity PA (MVPA) and sedentary time was assessed with accelerometers. More boys (51.3%) than girls (28.3%) reported to be involved in organized sports participation (p<0.001). Those who were engaged in organized sports were more likely to achieve physical activity guidelines (OR=1.64, 95% CI: 1.14-2.35, p<0.01), spent more time in MPA (OR=1.01, 95% CI: 1.01-1.02, p<0.01), VPA (OR=1.09, 95% CI: 1.05-1.13, p<0.001), and MVPA (OR=1.01, 95% CI: 1.01-1.02, p<0.001) than those who did not participate in organized sports. No associations between organised sport participation and time spent sedentary or BMI was observed. Engagement in organized sports is related to higher levels of objectively measured MPA, VPA and achieving the recommended levels of MVPA in youth; however participation in sports appears unrelated to time spent sedentary and BMI. Our results suggest that promoting organised sport may increase physical activity of at least moderate intensity in young people. Copyright © 2015 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Perceived and Objectively Measured Physical Activity and Sedentary Time among South Asian Women in the UK

PubMed Central

Curry, Whitney Babakus; Duda, Joan L.; Thompson, Janice L.

2015-01-01

Introduction: Limited self-report data suggest that South Asian (SA) women fail to meet physical activity (PA) recommendations. Recent research using objective measures reveals SA women living in the UK have higher PA levels than previously reported, and a pattern of under-reporting PA and sedentary time (ST). There is limited research on SA women’s understanding and experiences of PA/ST, and the cultural contexts and conditions within which they occur. Therefore the aims of this mixed-methods study were to compare perceived PA and ST to objectively measured data and explore PA- and ST-specific contexts, experiences, and sources of PA and ST amongst SA women in the UK. Methods: 24 women were purposively sampled to participate in a semi-structured interview from a larger study of 140 women who wore an accelerometer for 7 days. Demographic and anthropometric data were also collected. Results: Notable qualitative themes on contextualisation were of adequate PA as “keeping busy” or “being healthy”, and of ST as “lazy” or “resting in old age”. Few participants reported being sedentary, and most believed they were sufficiently physically active. Objectively measured PA/ST indicated that 66% women were less active than perceived (with regard to duration and intensity), with none able to estimate duration of ST. Discussion: Findings suggest that overall, SA women have contextualisations of PA/ST that may not coincide with those of researchers, health professionals and policy makers, and lack awareness of the intensity of PA in which they engage and the health risks of high levels of ST. These findings highlight the need for objective measures of PA and ST in this population combined with in-depth qualitative assessments to provide more accurate assessments of these behaviours. This information can subsequently be used to develop health promotion messages and interventions focusing on increasing duration and/or intensity levels of daily activities (e

Perceived and objectively measured physical activity and sedentary time among South Asian women in the UK.

PubMed

Curry, Whitney Babakus; Duda, Joan L; Thompson, Janice L

2015-03-16

Limited self-report data suggest that South Asian (SA) women fail to meet physical activity (PA) recommendations. Recent research using objective measures reveals SA women living in the UK have higher PA levels than previously reported, and a pattern of under-reporting PA and sedentary time (ST). There is limited research on SA women's understanding and experiences of PA/ST, and the cultural contexts and conditions within which they occur. Therefore the aims of this mixed-methods study were to compare perceived PA and ST to objectively measured data and explore PA- and ST-specific contexts, experiences, and sources of PA and ST amongst SA women in the UK. 24 women were purposively sampled to participate in a semi-structured interview from a larger study of 140 women who wore an accelerometer for 7 days. Demographic and anthropometric data were also collected. Notable qualitative themes on contextualisation were of adequate PA as "keeping busy" or "being healthy", and of ST as "lazy" or "resting in old age". Few participants reported being sedentary, and most believed they were sufficiently physically active. Objectively measured PA/ST indicated that 66% women were less active than perceived (with regard to duration and intensity), with none able to estimate duration of ST. Findings suggest that overall, SA women have contextualisations of PA/ST that may not coincide with those of researchers, health professionals and policy makers, and lack awareness of the intensity of PA in which they engage and the health risks of high levels of ST. These findings highlight the need for objective measures of PA and ST in this population combined with in-depth qualitative assessments to provide more accurate assessments of these behaviours. This information can subsequently be used to develop health promotion messages and interventions focusing on increasing duration and/or intensity levels of daily activities (e.g., walking, housework) and reducing ST in this population.

Optimization of Exposure Time Division for Multi-object Photometry

NASA Astrophysics Data System (ADS)

Popowicz, Adam; Kurek, Aleksander R.

2017-09-01

Optical observations of wide fields of view entail the problem of selecting the best exposure time. As many objects are usually observed simultaneously, the quality of photometry of the brightest ones is always better than that of the dimmer ones, even though all of them are frequently equally interesting for astronomers. Thus, measuring all objects with the highest possible precision is desirable. In this paper, we present a new optimization algorithm, dedicated for the division of exposure time into sub-exposures, which enables photometry with a more balanced noise budget. The proposed technique increases the photometric precision of dimmer objects at the expense of the measurement fidelity of the brightest ones. We have tested the method on real observations using two telescope setups, demonstrating its usefulness and good consistency with theoretical expectations. The main application of our approach is a wide range of sky surveys, including ones performed by space telescopes. The method can be used to plan virtually any photometric observation of objects that show a wide range of magnitudes.

The Timing of Visual Object Categorization

PubMed Central

Mack, Michael L.; Palmeri, Thomas J.

2011-01-01

An object can be categorized at different levels of abstraction: as natural or man-made, animal or plant, bird or dog, or as a Northern Cardinal or Pyrrhuloxia. There has been growing interest in understanding how quickly categorizations at different levels are made and how the timing of those perceptual decisions changes with experience. We specifically contrast two perspectives on the timing of object categorization at different levels of abstraction. By one account, the relative timing implies a relative timing of stages of visual processing that are tied to particular levels of object categorization: Fast categorizations are fast because they precede other categorizations within the visual processing hierarchy. By another account, the relative timing reflects when perceptual features are available over time and the quality of perceptual evidence used to drive a perceptual decision process: Fast simply means fast, it does not mean first. Understanding the short-term and long-term temporal dynamics of object categorizations is key to developing computational models of visual object recognition. We briefly review a number of models of object categorization and outline how they explain the timing of visual object categorization at different levels of abstraction. PMID:21811480

Real-time color measurement using active illuminant

NASA Astrophysics Data System (ADS)

Tominaga, Shoji; Horiuchi, Takahiko; Yoshimura, Akihiko

2010-01-01

This paper proposes a method for real-time color measurement using active illuminant. A synchronous measurement system is constructed by combining a high-speed active spectral light source and a high-speed monochrome camera. The light source is a programmable spectral source which is capable of emitting arbitrary spectrum in high speed. This system is the essential advantage of capturing spectral images without using filters in high frame rates. The new method of real-time colorimetry is different from the traditional method based on the colorimeter or the spectrometers. We project the color-matching functions onto an object surface as spectral illuminants. Then we can obtain the CIE-XYZ tristimulus values directly from the camera outputs at every point on the surface. We describe the principle of our colorimetric technique based on projection of the color-matching functions and the procedure for realizing a real-time measurement system of a moving object. In an experiment, we examine the performance of real-time color measurement for a static object and a moving object.

Effectiveness of the IDEFICS intervention on objectively measured physical activity and sedentary time in European children.

PubMed

Verbestel, V; De Henauw, S; Barba, G; Eiben, G; Gallois, K; Hadjigeorgiou, C; Konstabel, K; Maes, L; Mårild, S; Molnár, D; Moreno, L A; Oja, L; Pitsiladis, Y; Ahrens, W; Pigeot, I; De Bourdeaudhuij, I

2015-12-01

This paper reports on the effectiveness of the prevention of dietary- and lifestyle-induced health effects in children and infants (IDEFICS) intervention on objectively measured physical activity (PA) and sedentary time (ST) in 2- to 9.9-year-old European boys and girls. The intervention was evaluated after 2 years through a non-randomized cluster-controlled trial in eight European countries (one control and one intervention community per country). All children in the intervention group received a culturally adapted childhood obesity prevention programme through the community, schools/kindergartens and family. A random sub-sample of children participating in the IDEFICS study wore an accelerometer at baseline and follow-up for at least 3 days (n = 9,184). Of this sample, 81% provided valid accelerometer data at baseline (n = 7,413; 51% boys; 6.21 ± 1.76 years; boys: 617 ± 170 cpm day(-1) ; girls 556 ± 156 cpm day(-1) ) and 3,010 children provided valid accelerometer data at baseline and during the follow-up survey 2 years later. In boys and girls, no significant differences in PA and ST were found between intervention and control groups over 2 years. Strong temporal effects were found in the total sample of boys and girls: the percentage of time spent in light PA per day decreased by 4 percentage points in both boys and girls between baseline and follow-up (both: p < 0.001), while time spent in ST per day increased by 4 percentage points in both sexes over time (both: p < 0.001). Percentage of time spent in moderate-to-vigorous PA per day remained stable over time in boys and girls. Despite the socio-ecological approach and implementation of a culturally adapted intervention in each country, no effects of the IDEFICS intervention were found on children's objectively measured PA and ST. Behavioural interventions for children may need to enhance specificity and intensity at the family level using other behaviour change

Improving Objective Measures of Mobility.

ERIC Educational Resources Information Center

Dodds, Allan G.; And Others

1983-01-01

The article examines shortcomings in existing objective measures of mobility for blind persons in the light of evaluative experiences and demonstrates improvements in reliability, together with a new technique for tracking pavement position. It refutes the idea that it is not possible to measure improvement in performance objectively. (Author/CL)

Acoustic vibrations of metal nano-objects: Time-domain investigations

NASA Astrophysics Data System (ADS)

Crut, Aurélien; Maioli, Paolo; Del Fatti, Natalia; Vallée, Fabrice

2015-01-01

Theoretical and time-domain experimental investigations of the vibrational acoustic response of nano-objects are described focusing on metallic ones. Acoustic vibrations are modeled using a macroscopic-like approach based on continuum mechanics with the proper boundary conditions, a model which yields results in excellent agreement with the experimental ones and those of atomistic calculations, down to the nanometric scale. Vibrational mode excitation and detection mechanisms and the associated mode selection in ultrafast pump-probe spectroscopy are discussed, and the measured time-dependent signals in single and ensemble of nanoparticles modeled. The launched modes, their period and their damping rate are compared to experimental results obtained on ensembles of nano-objects with different composition, morphology and environment, and with size ranging from one to hundreds of nanometers. Recent extension of time-domain spectroscopy to individual nano-objects has shed new light on the vibrational responses of isolated nanoparticles, in particular on their damping, but also raises questions on the origin of its large particle to particle dispersion.

A Taxonomy of Object-Oriented Measures Modeling the Object-Oriented Space

NASA Technical Reports Server (NTRS)

Neal, Ralph D.; Weistroffer, H. Roland; Coppins, Richard J.

1997-01-01

In order to control the quality of software and the software development process, it is important to understand the measurement of software. A first step toward a better comprehension of software measurement is the categorization of software measures by some meaningful taxonomy. The most worthwhile taxonomy would capture the fundamental nature of the object-oriented (O-O) space. The principal characteristics of object-oriented software offer a starting point for such a categorization of measures. This paper introduces a taxonomy of measures based upon fourteen characteristics of object-oriented software gathered from the literature. This taxonomy allows us to easily see gaps or redundancies in the existing O-O measures. The taxonomy also clearly differentiates among taxa so that there is no ambiguity as to the taxon to which a measure belongs. The taxonomy has been populated with measures taken from the literature.

A Taxonomy of Object-Oriented Measures Modeling the Object Oriented Space

NASA Technical Reports Server (NTRS)

Neal, Ralph D.; Weistroffer, H. Roland; Coppins, Richard J.

1997-01-01

In order to control the quality of software and the software development process, it is important to understand the measurement of software. A first step toward a better comprehension of software measurement is the categorization of software measures by some meaningful taxonomy. The most worthwhile taxonomy would capture the fundamental nature of the object-oriented (O-O) space. The principal characteristics of object-oriented software offer a starting point for such a categorization of measures. This paper introduces a taxonomy of measures based upon fourteen characteristics of object-oriented software gathered from the literature. This taxonomy allows us to easily see gaps or redundancies in the existing O-O measures. The taxonomy also clearly differentiates among taxa so that there is no ambiguity as to the taxon to which a measure belongs. The taxonomy has been populated with measures taken from the literature.

Objectively measured sedentary time, physical activity, and metabolic risk: the Australian Diabetes, Obesity and Lifestyle Study (AusDiab).

PubMed

Healy, Genevieve N; Wijndaele, Katrien; Dunstan, David W; Shaw, Jonathan E; Salmon, Jo; Zimmet, Paul Z; Owen, Neville

2008-02-01

We examined the associations of objectively measured sedentary time and physical activity with continuous indexes of metabolic risk in Australian adults without known diabetes. An accelerometer was used to derive the percentage of monitoring time spent sedentary and in light-intensity and moderate-to-vigorous-intensity activity, as well as mean activity intensity, in 169 Australian Diabetes, Obesity and Lifestyle Study (AusDiab) participants (mean age 53.4 years). Associations with waist circumference, triglycerides, HDL cholesterol, resting blood pressure, fasting plasma glucose, and a clustered metabolic risk score were examined. Independent of time spent in moderate-to-vigorous-intensity activity, there were significant associations of sedentary time, light-intensity time, and mean activity intensity with waist circumference and clustered metabolic risk. Independent of waist circumference, moderate-to-vigorous-intensity activity time was significantly beneficially associated with triglycerides. These findings highlight the importance of decreasing sedentary time, as well as increasing time spent in physical activity, for metabolic health.

A comparison of moving object detection methods for real-time moving object detection

NASA Astrophysics Data System (ADS)

Roshan, Aditya; Zhang, Yun

2014-06-01

Moving object detection has a wide variety of applications from traffic monitoring, site monitoring, automatic theft identification, face detection to military surveillance. Many methods have been developed across the globe for moving object detection, but it is very difficult to find one which can work globally in all situations and with different types of videos. The purpose of this paper is to evaluate existing moving object detection methods which can be implemented in software on a desktop or laptop, for real time object detection. There are several moving object detection methods noted in the literature, but few of them are suitable for real time moving object detection. Most of the methods which provide for real time movement are further limited by the number of objects and the scene complexity. This paper evaluates the four most commonly used moving object detection methods as background subtraction technique, Gaussian mixture model, wavelet based and optical flow based methods. The work is based on evaluation of these four moving object detection methods using two (2) different sets of cameras and two (2) different scenes. The moving object detection methods have been implemented using MatLab and results are compared based on completeness of detected objects, noise, light change sensitivity, processing time etc. After comparison, it is observed that optical flow based method took least processing time and successfully detected boundary of moving objects which also implies that it can be implemented for real-time moving object detection.

Factors Associated with Objectively Measured Physical Activity and Sedentary Time of 5-6-Year-Old Children in the STEPS Study

ERIC Educational Resources Information Center

Matarma, Tanja; Tammelin, Tuija; Kulmala, Janne; Koski, Pasi; Hurme, Saija; Lagström, Hanna

2017-01-01

Background: The factors associated with preschool-aged children's physical activity (PA) remains unclear. The aim of this cross-sectional study was to examine how different factors were associated with preschool-aged children's objectively measured PA and sedentary time. Methods: The study population was 5-6-year-old children (n = 140) and their…

Relationship between parental estimate and an objective measure of child television watching

PubMed Central

Robinson, Jodie L; Winiewicz, Dana D; Fuerch, Janene H; Roemmich, James N; Epstein, Leonard H

2006-01-01

Many young children have televisions in their bedrooms, which may influence the relationship between parental estimate and objective measures of child television usage/week. Parental estimates of child television time of eighty 4–7 year old children (6.0 ± 1.2 years) at the 75th BMI percentile or greater (90.8 ± 6.8 BMI percentile) were compared to an objective measure of television time obtained from TV Allowance™ devices attached to every television in the home over a three week period. Results showed that parents overestimate their child's television time compared to an objective measure when no television is present in the bedroom by 4 hours/week (25.4 ± 11.5 vs. 21.4 ± 9.1) in comparison to underestimating television time by over 3 hours/week (26.5 ± 17.2 vs. 29.8 ± 14.4) when the child has a television in their bedroom (p = 0.02). Children with a television in their bedroom spend more objectively measured hours in television time than children without a television in their bedroom (29.8 ± 14.2 versus 21.4 ± 9.1, p = 0.003). Research on child television watching should take into account television watching in bedrooms, since it may not be adequately assessed by parental estimates. PMID:17129381

Correlates of objectively measured sedentary time and self-reported screen time in Canadian children.

PubMed

LeBlanc, Allana G; Broyles, Stephanie T; Chaput, Jean-Philippe; Leduc, Geneviève; Boyer, Charles; Borghese, Michael M; Tremblay, Mark S

2015-03-18

Demographic, family, and home characteristics play an important role in determining childhood sedentary behaviour. The objective of this paper was to identify correlates of total sedentary time (SED) and correlates of self-reported screen time (ST) in Canadian children. Child- and parent-reported household, socio-demographic, behavioural, and diet related data were collected; directly measured anthropometric and accelerometer data were also collected for each child. Participants with complete demographic, anthropometric, and either SED (n=524, 41% boys) or ST (n=567, 42% boys) data from the Canadian site of the International Study of Childhood Obesity Lifestyle and the Environment (ISCOLE) were included in analysis. Sixteen potential correlates of SED and ST were examined using multilevel general linear models, adjusting for sex, ethnicity, number of siblings, and socio-economic status. All explanatory variables moderately associated (p<0.10) with SED and/or ST in univariate analyses were included in the final, fully-adjusted models. Variables that remained significant in the final models (p<0.05) were considered correlates of SED and/or ST. Children averaged 8.5 hours of daily SED; no differences in total SED, or total ST were seen between girls and boys, but boys reported significantly more video game/computer usage than girls. Boys also had higher waist circumference and BMI z-scores than girls. In the final models, waist circumference and number of TVs in the home were the only common correlates of both SED and ST. SED was also negatively associated with sleep duration. ST was also positively associated with mother's weight status, father's education, and unhealthy eating pattern score and negatively associated with healthy eating pattern score, and weekend breakfast consumption. Few common correlates existed between boys and girls. Several factors were identified as correlates of SED and/or of ST in Canadian children; however, few correlates were common for

Reliability of a single objective measure in assessing sleepiness.

PubMed

Sunwoo, Bernie Y; Jackson, Nicholas; Maislin, Greg; Gurubhagavatula, Indira; George, Charles F; Pack, Allan I

2012-01-01

To evaluate reliability of single objective tests in assessing sleepiness. Subjects who completed polysomnography underwent a 4-nap multiple sleep latency test (MSLT) the following day. Prior to each nap opportunity on MSLT, subjects performed the psychomotor vigilance test (PVT) and divided attention driving task (DADT). Results of single versus multiple test administrations were compared using the intraclass correlation coefficient (ICC) and adjusted for test administration order effects to explore time of day effects. Measures were explored as continuous and binary (i.e., impaired or not impaired). Community-based sample evaluated at a tertiary, university-based sleep center. 372 adult commercial vehicle operators oversampled for increased obstructive sleep apnea risk. N/A. AS CONTINUOUS MEASURES, ICC WERE AS FOLLOWS: MSLT 0.45, PVT median response time 0.69, PVT number of lapses 0.51, 10-min DADT tracking error 0.87, 20-min DADT tracking error 0.90. Based on binary outcomes, ICC were: MSLT 0.63, PVT number of lapses 0.85, 10-min DADT 0.95, 20-min DADT 0.96. Statistically significant time of day effects were seen in both the MSLT and PVT but not the DADT. Correlation between ESS and different objective tests was strongest for MSLT, range [-0.270 to -0.195] and persisted across all time points. Single DADT and PVT administrations are reliable measures of sleepiness. A single MSLT administration can reasonably discriminate individuals with MSL < 8 minutes. These results support the use of a single administration of some objective tests of sleepiness when performed under controlled conditions in routine clinical care.

The cross-sectional associations between objectively measured sedentary time and cardiometabolic health markers in adults - a systematic review with meta-analysis component.

PubMed

Powell, C; Herring, M P; Dowd, K P; Donnelly, A E; Carson, B P

2018-03-01

Sedentary time is viewed as an independent risk factor for adverse cardiometabolic health (CMH). No systematic review and meta-analysis on the cross-sectional associations between objectively measured sedentary time and CMH markers has been conducted. PubMed, Scopus and Web of Science Core Collection were searched for papers that examined the cross-sectional association between objectively measured sedentary time and CMH markers in adults. Forty-six papers met the inclusion criteria. The included papers had a combined sample size of 70,576 and an age range of 18-87 years. To examine the effect of increased levels of sedentary time on CMH markers, data on effect sizes and moderators were extracted, where possible. By pooling the unadjusted data from the included papers, increased sedentary time was shown to have a significant detrimental association with fasting glucose (Δ = 0.12, 95% confidence interval [CI]: 0.02, 0.23), fasting insulin (Δ = 0.19, 95% CI: 0.06, 0.32), triglycerides (Δ = 0.25, 95% CI: 0.14, 0.37), high-density lipoprotein cholesterol (Δ = -0.20, 95% CI: -0.28, -0.13) and waist circumference (Δ = 0.25, 95% CI: 0.15, 0.35). How sedentary time was quantified and the device used to measure sedentary time significantly influence the size of the effect reported. Future interventions focused on both decreasing sedentary time and increasing physical activity may be the most effective strategy to improve CMH. © 2017 World Obesity Federation.

Association of objectively measured physical activity and sedentary time with arterial stiffness in women with systemic lupus erythematosus with mild disease activity

PubMed Central

Vargas-Hitos, José A.; Gavilán-Carrera, Blanca; Navarro-Mateos, Carmen; Acosta-Manzano, Pedro; Delgado-Fernández, Manuel; Sabio, José M.; Ortego-Centeno, Norberto; Callejas-Rubio, José L.; Soriano-Maldonado, Alberto

2018-01-01

Objectives To examine the association of objectively measured physical activity (PA) intensity levels and sedentary time with arterial stiffness in women with systemic lupus erythematosus (SLE) with mild disease activity and to analyze whether participants meeting the international PA guidelines have lower arterial stiffness than those not meeting the PA guidelines. Methods The study comprised 47 women with SLE (average age 41.2 [standard deviation 13.9]) years, with clinical and treatment stability during the 6 months prior to the study. PA intensity levels and sedentary time were objectively measured with triaxial accelerometry. Arterial stiffness was assessed through pulse wave velocity, evaluated by Mobil-O-Graph® 24h pulse wave analysis monitor. Results The average time in moderate to vigorous PA in bouts of ≥10 consecutive minutes was 135.1±151.8 minutes per week. There was no association of PA intensity levels and sedentary time with arterial stiffness, either in crude analyses or after adjusting for potential confounders. Participants who met the international PA guidelines did not show lower pulse wave velocity than those not meeting them (b = -0.169; 95% CI: -0.480 to 0.143; P = 0.280). Conclusions Our results suggest that PA intensity levels and sedentary time are not associated with arterial stiffness in patients with SLE. Further analyses revealed that patients with SLE meeting international PA guidelines did not present lower arterial stiffness than those not meeting the PA guidelines. Future prospective research is needed to better understand the association of PA and sedentary time with arterial stiffness in patients with SLE. PMID:29694382

Measurement of voice onset time in maxillectomy patients.

PubMed

Hattori, Mariko; Sumita, Yuka I; Taniguchi, Hisashi

2014-01-01

Objective speech evaluation using acoustic measurement is needed for the proper rehabilitation of maxillectomy patients. For digital evaluation of consonants, measurement of voice onset time is one option. However, voice onset time has not been measured in maxillectomy patients as their consonant sound spectra exhibit unique characteristics that make the measurement of voice onset time challenging. In this study, we established criteria for measuring voice onset time in maxillectomy patients for objective speech evaluation. We examined voice onset time for /ka/ and /ta/ in 13 maxillectomy patients by calculating the number of valid measurements of voice onset time out of three trials for each syllable. Wilcoxon's signed rank test showed that voice onset time measurements were more successful for /ka/ and /ta/ when a prosthesis was used (Z = -2.232, P = 0.026 and Z = -2.401, P = 0.016, resp.) than when a prosthesis was not used. These results indicate a prosthesis affected voice onset measurement in these patients. Although more research in this area is needed, measurement of voice onset time has the potential to be used to evaluate consonant production in maxillectomy patients wearing a prosthesis.

Measurement of Voice Onset Time in Maxillectomy Patients

PubMed Central

Hattori, Mariko; Sumita, Yuka I.; Taniguchi, Hisashi

2014-01-01

Objective speech evaluation using acoustic measurement is needed for the proper rehabilitation of maxillectomy patients. For digital evaluation of consonants, measurement of voice onset time is one option. However, voice onset time has not been measured in maxillectomy patients as their consonant sound spectra exhibit unique characteristics that make the measurement of voice onset time challenging. In this study, we established criteria for measuring voice onset time in maxillectomy patients for objective speech evaluation. We examined voice onset time for /ka/ and /ta/ in 13 maxillectomy patients by calculating the number of valid measurements of voice onset time out of three trials for each syllable. Wilcoxon's signed rank test showed that voice onset time measurements were more successful for /ka/ and /ta/ when a prosthesis was used (Z = −2.232, P = 0.026 and Z = −2.401, P = 0.016, resp.) than when a prosthesis was not used. These results indicate a prosthesis affected voice onset measurement in these patients. Although more research in this area is needed, measurement of voice onset time has the potential to be used to evaluate consonant production in maxillectomy patients wearing a prosthesis. PMID:24574934

Objectively Measured Sedentary Time and Cardiometabolic Biomarkers in US Hispanic/Latino Adults: The Hispanic Community Health Study/Study of Latinos (HCHS/SOL).

PubMed

Qi, Qibin; Strizich, Garrett; Merchant, Gina; Sotres-Alvarez, Daniela; Buelna, Christina; Castañeda, Sheila F; Gallo, Linda C; Cai, Jianwen; Gellman, Marc D; Isasi, Carmen R; Moncrieft, Ashley E; Sanchez-Johnsen, Lisa; Schneiderman, Neil; Kaplan, Robert C

2015-10-20

Sedentary behavior is recognized as a distinct construct from lack of moderate-vigorous physical activity and is associated with deleterious health outcomes. Previous studies have primarily relied on self-reported data, whereas data on the relationship between objectively measured sedentary time and cardiometabolic biomarkers are sparse, especially among US Hispanics/Latinos. We examined associations of objectively measured sedentary time (via Actical accelerometers for 7 days) and multiple cardiometabolic biomarkers among 12 083 participants, aged 18 to 74 years, from the Hispanic Community Health Study/Study of Latinos (HCHS/SOL). Hispanics/Latinos of diverse backgrounds (Central American, Cuban, Dominican, Mexican, Puerto Rican, and South American) were recruited from 4 US cities between 2008 and 2011. Sedentary time (<100 counts/min) was standardized to 16 hours/d of wear time. The mean sedentary time was 11.9 hours/d (74% of accelerometer wear time). After adjustment for moderate-vigorous physical activity and confounding variables, prolonged sedentary time was associated with decreased high-density lipoprotein cholesterol (P=0.04), and increased triglycerides, 2-hour glucose, fasting insulin, and homeostatic model assessment of insulin resistance (all P<0.0001). These associations were generally consistent across age, sex, Hispanic/Latino backgrounds, and physical activity levels. Even among individuals meeting physical activity guidelines, sedentary time was detrimentally associated with several cardiometabolic biomarkers (diastolic blood pressure, high-density lipoprotein cholesterol, fasting and 2-hour glucose, fasting insulin and homeostatic model assessment of insulin resistance; all P<0.05). Our large population-based, objectively derived data showed deleterious associations between sedentary time and cardiometabolic biomarkers, independent of physical activity, in US Hispanics/Latinos. Our findings emphasize the importance of reducing sedentary

Objectively measured physical activity and sedentary time of breast cancer survivors, and associations with adiposity: findings from NHANES (2003-2006).

PubMed

Lynch, Brigid M; Dunstan, David W; Healy, Genevieve N; Winkler, Elisabeth; Eakin, Elizabeth; Owen, Neville

2010-02-01

Obesity and physical inactivity are poor prognostic indicators for breast cancer. Studies to date have relied on self-report measures of physical activity, which tend mainly to assess moderate-to-vigorous intensity leisure-time physical activity. We report the cross-sectional associations of objectively assessed physical activity and sedentary time with adiposity in a sample of breast cancer survivors from the United States. One hundred and eleven women from the National Health and Nutrition Examination Survey (NHANES) 2003-2004 and 2005-2006 reported a history of breast cancer. Participants wore an accelerometer for 7 days, and activity levels were summarized as moderate-to-vigorous intensity (accelerometer counts/min > or =1,952), light intensity (counts/min 100-1,951), and sedentary time (counts/min <100). Anthropometric measures were taken by study staff at examination centers. Participants spent the majority of their day in sedentary time (66%) or in light intensity activities (33%). Log moderate-to-vigorous intensity physical activity was negatively associated with adiposity (waist circumference beta = -9.805 [95% CI: -15.836, -3.775]; BMI beta = -3.576 [95% CI: -6.687, -0.464]). Light intensity physical activity was negatively associated with adiposity; however, the fully adjusted models did not retain statistical significance. Similarly, sedentary time was positively associated with adiposity, but the fully adjusted models were not statistically significant. This is the first study to describe the objectively assessed physical activity and sedentary time of breast cancer survivors. Increasing moderate-to-vigorous and light intensity physical activity, and decreasing sedentary time, may assist with weight management and improve other metabolic health outcomes for breast cancer survivors.

DATA QUALITY OBJECTIVES AND MEASUREMENT QUALITY OBJECTIVES FOR RESEARCH PROJECTS

EPA Science Inventory

The paper provides assistance with systematic planning using measurement quality objectives to those working on research projects. These performance criteria are more familiar to researchers than data quality objectives because they are more closely associated with the measuremen...

Objectively measured physical activity and sedentary time in south Asian women: a cross-sectional study.

PubMed

Curry, Whitney B; Thompson, Janice L

2014-12-13

South Asian (SA) women in the United Kingdom (UK) are known to be at high risk for developing chronic diseases, and to have low levels of physical activity (PA). Increasing levels of PA and reducing sedentary time (ST) are recognized as factors to target in an effort to curb chronic disease morbidity and mortality. There is limited evidence documenting objectively measured PA/ST and their correlates in SA women. Therefore the purpose of this cross-sectional study was to objectively measure and report patterns of PA/ST among SA women in the UK and examine potential socio-demographic correlates of PA/ST. 140 UK SA women (Pakistani and Bangladeshi) wore an accelerometer for 7 consecutive days. Anthropometric measurements and self-reported socio-demographic information were taken. Mean daily moderate-to-vigorous PA (MVPA) was 34.66 ± 21.52 minutes and mean daily ST was 530.20 ± 81.76 minutes, with an inverse correlation (r = -.270, N = 140, p < .001) showing that higher ST was associated with lower MVPA. The same was seen for light intensity PA (LPA) (r = -.610, N = 140, p < .001). MVPA was significantly higher for younger women (18-64.5 yrs), with 64.7% of older women (≥65 yrs) failing to meet PA guidelines (t = 3.101, p < 0.05). Overweight/obese women had lower levels of LPA, MVPA and higher ST (p < .001). Multiple linear regression analyses indicated 14.9% of the variance in MVPA was explained by age and waist circumference (F(2,138) = 6.41, p < 0.002). LPA and ST were significantly higher on weekend days than weekdays (p < .001), and MVPA was significantly higher on weekdays than weekend days. Results indicate higher levels of PA in this sample than previously assumed. High levels of LPA in this sample indicate the need for health promotion interventions to target not only duration, but also intensity of activity in this population to achieve PA recommendations.

36 CFR 218.10 - Objection time periods and process.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Objection time periods and... Objection time periods and process. (a) Time to file an objection. Written objections, including any... of objectors to ensure that their objection is received in a timely manner. (b) Computation of time...

Prediction of objectively measured physical activity and sedentariness among blue-collar workers using survey questionnaires.

PubMed

Gupta, Nidhi; Heiden, Marina; Mathiassen, Svend Erik; Holtermann, Andreas

2016-05-01

We aimed at developing and evaluating statistical models predicting objectively measured occupational time spent sedentary or in physical activity from self-reported information available in large epidemiological studies and surveys. Two-hundred-and-fourteen blue-collar workers responded to a questionnaire containing information about personal and work related variables, available in most large epidemiological studies and surveys. Workers also wore accelerometers for 1-4 days measuring time spent sedentary and in physical activity, defined as non-sedentary time. Least-squares linear regression models were developed, predicting objectively measured exposures from selected predictors in the questionnaire. A full prediction model based on age, gender, body mass index, job group, self-reported occupational physical activity (OPA), and self-reported occupational sedentary time (OST) explained 63% (R (2)adjusted) of the variance of both objectively measured time spent sedentary and in physical activity since these two exposures were complementary. Single-predictor models based only on self-reported information about either OPA or OST explained 21% and 38%, respectively, of the variance of the objectively measured exposures. Internal validation using bootstrapping suggested that the full and single-predictor models would show almost the same performance in new datasets as in that used for modelling. Both full and single-predictor models based on self-reported information typically available in most large epidemiological studies and surveys were able to predict objectively measured occupational time spent sedentary or in physical activity, with explained variances ranging from 21-63%.

Measuring what matters: does 'objectivity' mean good science?

PubMed

Kayes, Nicola M; McPherson, Kathryn M

2010-01-01

While the limitations of self-report measures are clearly acknowledged, less apparent is attention to the potential limitations of their 'objective' counterparts leading to the assumption that objectivity results in more robust and scientifically valid measurement tools. This article aims to: (1) test this assumption; (2) consider the implications of advocating for a measure on the basis of its objectivity; (3) propose an alternative approach to measure selection. A critical evaluation of one 'objective' measure highlights a number of potential limitations suggesting that the apparent willingness to adopt 'objective' measures with little questioning may be misguided. The possible implications of this are discussed and include a risk to the advancement of, and capacity for, knowledge in rehabilitation; or worse, of making clinical decisions based on erroneous conclusions. Characterising a measure on the basis of objectivity (or not) assumes an overly simplistic dichotomy that is unhelpful and perhaps misleading. We argue that assessing whether a measure is fit for purpose and makes mathematical sense is the key consideration. Indeed, in some cases, using both an 'objective' measure and a subjective rating scale may be appropriate and the only way of truly capturing the phenomenon of interest.

36 CFR 218.10 - Objection time periods and process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... calendar day (11:59 p.m. in the time zone of the receiving office) for objections filed by electronic means... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Objection time periods and... Objection time periods and process. (a) Time to file an objection. Written objections, including any...

Objectivity in psychosocial measurement: what, why, how.

PubMed

Fisher, W P

2000-01-01

This article raises and tries to answer questions concerning what objectivity in psychosocial measurement is, why it is important, and how it can be achieved. Following in the tradition of the Socratic art of maiuetics, objectivity is characterized by the separation of meaning from the geometric, metaphoric, or numeric figure carrying it, allowing an ideal and abstract entity to take on a life of its own. Examples of objective entities start from anything teachable and learnable, but for the purposes of measurement, the meter, gram, volt, and liter are paradigmatic because of their generalizability across observers, instruments, laboratories, samples, applications, etc. Objectivity is important because it is only through it that distinct conceptual entities are meaningfully distinguished. Seen from another angle, objectivity is important because it defines the conditions of the possibility of shared meaning and community. Full objectivity in psychosocial measurement can be achieved only by attending to both its methodological and its social aspects. The methodological aspect has recently achieved some notice in psychosocial measurement, especially in the form of Rasch's probabilistic conjoint models. Objectivity's social aspect has only recently been noticed by historians of science, and has not yet been systematically incorporated in any psychosocial science. An approach to achieving full objectivity in psychosocial measurement is adapted from the ASTM Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method (ASTM Committee E-11 on Statistical Methods, 1992).

Domain-Specific Self-Reported and Objectively Measured Physical Activity in Children.

PubMed

Sprengeler, Ole; Wirsik, Norman; Hebestreit, Antje; Herrmann, Diana; Ahrens, Wolfgang

2017-03-01

Little is known about the extent that different domains contribute to total sedentary (SED), light (LPA) and moderate-to-vigorous physical activity (MVPA). We aimed to identify domain-specific physical activity (PA) patterns in school-aged children who were assessed by questionnaire and accelerometry. For the study, 298 German school children and adolescents aged 6-17 years wore an accelerometer for one week and completed a PA recall-questionnaire for the same period. Spearman coefficients (r) were used to evaluate the agreement between self-reported and objectively measured PA in five domains (transport, school hours, physical education, leisure-time, organized sports activities). School hours mainly contributed to the total objectively measured SED, LPA and MVPA (55%, 53% and 46%, respectively), whilst sports activities contributed only 24% to total MVPA. Compared to accelerometry, the proportion of self-reported LPA and MVPA during school hours was substantially underestimated but overestimated during leisure-time. The agreement of self-reported and objectively measured PA was low for total LPA (r = 0.09, 95% CI (confidence interval): -0.03-0.20) and total MVPA (r = 0.21, 95% CI: 0.10-0.32), while moderate agreement was only found for total SED (r = 0.44, 95% CI: 0.34-0.53), LPA during transport (r = 0.59; 95% CI: 0.49-0.67) and MVPA during organized sports activities (r = 0.54; 95% CI: 0.38-0.67). Since school hours mainly contribute to total SED, LPA and MVPA and self-reported LPA and MVPA during school were importantly underestimated compared to objectively measured LPA and MVPA, the application of objective measurements is compulsory to characterize the entire activity pattern of school-aged children.

Object strength--an accurate measure for small objects that is insensitive to partial volume effects.

PubMed

Tofts, P S; Silver, N C; Barker, G J; Gass, A

2005-07-01

There are currently four problems in characterising small nonuniform lesions or other objects in Magnetic Resonance images where partial volume effects are significant. Object size is over- or under-estimated; boundaries are often not reproducible; mean object value cannot be measured; and fuzzy borders cannot be accommodated. A new measure, Object Strength, is proposed. This is the sum of all abnormal intensities, above a uniform background value. For a uniform object, this is simply the product of the increase in intensity and the size of the object. Biologically, this could be at least as relevant as existing measures of size or mean intensity. We hypothesise that Object Strength will perform better than traditional area measurements in characterising small objects. In a pilot study, the reproducibility of object strength measurements was investigated using MR images of small multiple sclerosis (MS) lesions. In addition, accuracy was investigated using artificial lesions of known volume (0.3-6.2 ml) and realistic appearance. Reproducibility approached that of area measurements (in 33/90 lesion reports the difference between repeats was less than for area measurements). Total lesion volume was accurate to 0.2%. In conclusion, Object Strength has potential for improved characterisation of small lesions and objects in imaging and possibly spectroscopy.

Real time cancer prediction based on objective tissue compliance measurement in endoscopic surgery.

PubMed

Fakhry, Morkos; Bello, Fernando; Hanna, George B

2014-02-01

To investigate the feasibility of real time cancer tissue diagnosis intraoperatively based on in vivo tissue compliance measurements obtained by a recently developed laparoscopic smart device. Cancer tissue is stiffer than its normal counterpart. Modern forms of remote surgery such as laparoscopic and robotic surgical techniques diminish direct assessment of this important tissue property. In vivo human tissue compliance of the normal and cancer gastrointestinal tissue is unknown. A Clinical Real Time Tissue Compliance Mapping System (CRTCMS) with a predictive power comparable to the human hand and useable in routine surgical practice has been recently developed. The CRTCMS is employed in the operating theater to collect data from 50 patients undergoing intra-abdominal surgical interventions [40 men, 10 women, aged between 32 and 89 (mean = 66.4, range = 57)]. This includes 10 esophageal and 27 gastric cancer patients. A total of 1212 compliance measurements of normal and cancerous in vivo gastrointestinal tissues were taken. The data were used to calibrate the CRTCMS to predict cancerous tissue in a further 12 patients (3 cancer esophagus and 9 cancer stomach) involving 175 measurements. The system demonstrated a high prediction power to diagnose cancer tissue in real time during routine surgical procedures (sensitivity = 98.7%, specificity = 99%). An in vivo human tissue compliance data bank of the gastrointestinal tract was produced. Real time cancer diagnosis based on in vivo tissue compliance measurements is feasible. The reported data open new avenues in cancer diagnostics, surgical robotics, and development of more realistic surgical simulators.

Domain-Specific Self-Reported and Objectively Measured Physical Activity in Children

PubMed Central

Sprengeler, Ole; Wirsik, Norman; Hebestreit, Antje; Herrmann, Diana; Ahrens, Wolfgang

2017-01-01

Little is known about the extent that different domains contribute to total sedentary (SED), light (LPA) and moderate-to-vigorous physical activity (MVPA). We aimed to identify domain-specific physical activity (PA) patterns in school-aged children who were assessed by questionnaire and accelerometry. For the study, 298 German school children and adolescents aged 6–17 years wore an accelerometer for one week and completed a PA recall-questionnaire for the same period. Spearman coefficients (r) were used to evaluate the agreement between self-reported and objectively measured PA in five domains (transport, school hours, physical education, leisure-time, organized sports activities). School hours mainly contributed to the total objectively measured SED, LPA and MVPA (55%, 53% and 46%, respectively), whilst sports activities contributed only 24% to total MVPA. Compared to accelerometry, the proportion of self-reported LPA and MVPA during school hours was substantially underestimated but overestimated during leisure-time. The agreement of self-reported and objectively measured PA was low for total LPA (r = 0.09, 95% CI (confidence interval): −0.03–0.20) and total MVPA (r = 0.21, 95% CI: 0.10–0.32), while moderate agreement was only found for total SED (r = 0.44, 95% CI: 0.34–0.53), LPA during transport (r = 0.59; 95% CI: 0.49–0.67) and MVPA during organized sports activities (r = 0.54; 95% CI: 0.38–0.67). Since school hours mainly contribute to total SED, LPA and MVPA and self-reported LPA and MVPA during school were importantly underestimated compared to objectively measured LPA and MVPA, the application of objective measurements is compulsory to characterize the entire activity pattern of school-aged children. PMID:28257046

Objectively measured physical activity and sedentary-time are associated with arterial stiffness in Brazilian young adults.

PubMed

Horta, Bernardo Lessa; Schaan, Beatriz D; Bielemann, Renata Moraes; Vianna, Carolina Ávila; Gigante, Denise Petrucci; Barros, Fernando C; Ekelund, Ulf; Hallal, Pedro Curi

2015-11-01

To examine the associations between objectively measured physical activity and sedentary time with pulse wave velocity (PWV) in Brazilian young adults. Cross-sectional analysis with participants of the 1982 Pelotas (Brazil) Birth Cohort who were followed-up from birth to 30 years of age. Overall physical activity (PA) assessed as the average acceleration (mg), time spent in moderate-to-vigorous physical activity (MVPA - min/day) and sedentary time (min/day) were calculated from acceleration data. Carotid-femoral PWV (m/s) was assessed using a portable ultrasound. Systolic and diastolic blood pressure (SBP/DBP), waist circumference (WC) and body mass index (BMI) were analyzed as possible mediators. Multiple linear regression and g-computation formula were used in the analyses. Complete data were available for 1241 individuals. PWV was significantly lower in the two highest quartiles of overall PA (0.26 m/s) compared with the lowest quartile. Participants in the highest quartile of sedentary time had 0.39 m/s higher PWV (95%CI: 0.20; 0.57) than those in the lowest quartile. Individuals achieving ≥30 min/day in MVPA had lower PWV (β = -0.35; 95%CI: -0.56; -0.14). Mutually adjusted analyses between MVPA and sedentary time and PWV changed the coefficients, although results from sedentary time remained more consistent. WC captured 44% of the association between MVPA and PWV. DBP explained 46% of the association between acceleration and PWV. Physical activity was inversely related to PWV in young adults, whereas sedentary time was positively associated. Such associations were only partially mediated by WC and DBP. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Moire measuring technology for three-dimensional profile of the object

NASA Astrophysics Data System (ADS)

Fu, Yanjun; Yang, Kuntao

2006-02-01

An optical system is designed to get projection of the transmission grating, the deformed grating is obtained on surface of the object. The image of the deformed grating is given by the lens, the reference grating is put on the place of the image, and then the moire fringe is obtained. The amplify principle of the moire fringe is used to measure the profile of the object. The optical principle of the projection is analyzed. And the relation between the phase and the height of object is deduced. From the different point of geometry optics and the physics opticsl, the optical system is analyzed, the factors that influence the image equality and the measuring result are obtained. So the betterment of improving the measuring precision is brought forward, and in the later information processing, because of the diffuse reflection, the image equality is not very well. In order to get a good image, the digital filter is used to filter the noise and smooth the image firstly. Then in order to improve the measure precision, the subdivision technology is applied. The Fourier transform profilometry and phase shifting technology is used in the calculation. A detail analyses is done both in time field and frequency field. And the method of improving the measuring precision is put forward. A good digital filter algorithm is brought forward in the Fourier transform profilometry. In the phase shifting technology, the detail formula of three-step and four-step is given. At last the phase that is relational with the high information of the object is get, but the phase is disconnected phase, after the unwrapping algorithm,the disconnected phase is changed to be the continuous phase. Taking use of the relation between the phase and height, the height is obtained. Then the three-dimensional profile of the measured object can be reconstructed. The system is very convenient for non-contact measure of profile of some objects.

Association of objectively measured physical activity and sedentary time with arterial stiffness in women with systemic lupus erythematosus with mild disease activity.

PubMed

Morillas-de-Laguno, Pablo; Vargas-Hitos, José A; Rosales-Castillo, Antonio; Sáez-Urán, Luis Manuel; Montalbán-Méndez, Cristina; Gavilán-Carrera, Blanca; Navarro-Mateos, Carmen; Acosta-Manzano, Pedro; Delgado-Fernández, Manuel; Sabio, José M; Ortego-Centeno, Norberto; Callejas-Rubio, José L; Soriano-Maldonado, Alberto

2018-01-01

To examine the association of objectively measured physical activity (PA) intensity levels and sedentary time with arterial stiffness in women with systemic lupus erythematosus (SLE) with mild disease activity and to analyze whether participants meeting the international PA guidelines have lower arterial stiffness than those not meeting the PA guidelines. The study comprised 47 women with SLE (average age 41.2 [standard deviation 13.9]) years, with clinical and treatment stability during the 6 months prior to the study. PA intensity levels and sedentary time were objectively measured with triaxial accelerometry. Arterial stiffness was assessed through pulse wave velocity, evaluated by Mobil-O-Graph® 24h pulse wave analysis monitor. The average time in moderate to vigorous PA in bouts of ≥10 consecutive minutes was 135.1±151.8 minutes per week. There was no association of PA intensity levels and sedentary time with arterial stiffness, either in crude analyses or after adjusting for potential confounders. Participants who met the international PA guidelines did not show lower pulse wave velocity than those not meeting them (b = -0.169; 95% CI: -0.480 to 0.143; P = 0.280). Our results suggest that PA intensity levels and sedentary time are not associated with arterial stiffness in patients with SLE. Further analyses revealed that patients with SLE meeting international PA guidelines did not present lower arterial stiffness than those not meeting the PA guidelines. Future prospective research is needed to better understand the association of PA and sedentary time with arterial stiffness in patients with SLE.

Adaptation or recovery after health shocks? Evidence using subjective and objective health measures.

PubMed

Baji, Petra; Bíró, Anikó

2018-05-01

In this paper, we analyse the effect of an onset of a health shock on subjective survival probability and compare it with objective survival probability and self-reported health measures. In particular, we are interested in whether expectations of people respond to health shocks and whether these follow the evolution of objective life expectations and self-reported health measures over time. Using longitudinal data from the Health and Retirement Study, we estimate fixed effects models of adaptation for the objective and subjective survival probabilities and for some self-reported health measures. The results show that after cancer diagnosis, conditional on surviving, both the objective and subjective longevity and self-reported health measures drift back to the before diagnosis trajectories. For stroke and heart attack, in spite of their persistent negative effect on survival, subjective life expectations and self-reported health measures seem to indicate only a transient effect of the health shock. The differences between the objective and subjective measures are in line with the concept of adaptation. We discuss the policy implications of our results. Copyright © 2018 John Wiley & Sons, Ltd.

Objectively Measured Physical Activity and Sedentary Time during Childhood, Adolescence and Young Adulthood: A Cohort Study

PubMed Central

Ortega, Francisco B.; Hurtig-Wennlöf, Anita; Mäestu, Jarek; Löf, Marie; Harro, Jaanus; Bellocco, Rino; Labayen, Idoia; Veidebaum, Toomas; Sjöström, Michael

2013-01-01

Background To know how moderate-to-vigorous physical activity (MVPA) and sedentary time change across lifespan periods is needed for designing successful lifestyle interventions. We aimed to study changes in objectively measured (accelerometry) MVPA and sedentary time from childhood to adolescence and from adolescence to young adulthood. Methods Estonian and Swedish participants from the European Youth Heart Study aged 9 and 15 years at baseline (N = 2312) were asked to participate in a second examination 6 (Sweden) to 9/10 (Estonia) years later. 1800 participants with valid accelerometer data were analyzed. Results MVPA decreased from childhood to adolescence (−1 to −2.5 min/d per year of follow-up, P = 0.01 and <0.001, for girls and boys respectively) and also from adolescence to young adulthood (−0.8 to −2.2 min/d per year, P = 0.02 and <0.001 for girls and boys, respectively). Sedentary time increased from childhood to adolescence (+15 and +20 min/d per year, for girls and boys respectively, P<0.001), with no substantial change from adolescence to young adulthood. Changes in both MVPA and sedentary time were greater in Swedish than in Estonian participants and in boys than in girls. The magnitude of the change observed in sedentary time was 3–6 time larger than the change observed in MVPA. Conclusions The decline in MVPA (overall change = 30 min/d) and increase sedentary time (overall change = 2∶45 h/d) observed from childhood to adolescence are of concern and might increase the risk of developing obesity and other chronic diseases later in life. These findings substantially contribute to understand how key health-related behaviors (physical activity and sedentary) change across important periods of life. PMID:23637772

Vascular and nerve damage in workers exposed to vibrating tools. The importance of objective measurements of exposure time.

PubMed

Gerhardsson, Lars; Balogh, Istvan; Hambert, Per-Arne; Hjortsberg, Ulf; Karlsson, Jan-Erik

2005-01-01

The aim of the present study was to compare the development of vibration white fingers (VWF) in workers in relation to different ways of exposure estimation, and their relationship to the standard ISO 5349, annex A. Nineteen vibration exposed (grinding machines) male workers completed a questionnaire followed by a structured interview including questions regarding their estimated hand-held vibration exposure. Neurophysiological tests such as fractionated nerve conduction velocity in hands and arms, vibrotactile perception thresholds and temperature thresholds were determined. The subjective estimation of the mean daily exposure-time to vibrating tools was 192 min (range 18-480 min) among the workers. The estimated mean exposure time calculated from the consumption of grinding wheels was 42 min (range 18-60 min), approximately a four-fold overestimation (Wilcoxon's signed ranks test, p<0.001). Thus, objective measurements of the exposure time, related to the standard ISO 5349, which in this case were based on the consumption of grinding wheels, will in most cases give a better basis for adequate risk assessment than self-exposure assessment.

Issues Related to Measuring and Interpreting Objectively Measured Sedentary Behavior Data

ERIC Educational Resources Information Center

Janssen, Xanne; Cliff, Dylan P.

2015-01-01

The use of objective measures of sedentary behavior has increased over the past decade; however, as is the case for objectively measured physical activity, methodological decisions before and after data collection are likely to influence the outcomes. The aim of this article is to review the evidence on different methodological decisions made by…

APPLICATION OF DATA QUALITY OBJECTIVES AND MEASUREMENT QUALITY OBJECTIVES TO RESEARCH PROJECTS

EPA Science Inventory

The paper assists systematic planning for research projects. It presents planning concepts in terms that have some utility for researchers. For example, measurement quality objectives are more familiar to researchers than data quality objectives because these quality criteria are...

Measuring systems of hard to get objects: problems with analysis of measurement results

NASA Astrophysics Data System (ADS)

Gilewska, Grazyna

2005-02-01

The problem accessibility of metrological parameters features of objects appeared in many measurements. Especially if it is biological object which parameters very often determined on the basis of indirect research. Accidental component predominate in forming of measurement results with very limited access to measurement objects. Every measuring process has a lot of conditions limiting its abilities to any way processing (e.g. increase number of measurement repetition to decrease random limiting error). It may be temporal, financial limitations, or in case of biological object, small volume of sample, influence measuring tool and observers on object, or whether fatigue effects e.g. at patient. It's taken listing difficulties into consideration author worked out and checked practical application of methods outlying observation reduction and next innovative methods of elimination measured data with excess variance to decrease of mean standard deviation of measured data, with limited aomunt of data and accepted level of confidence. Elaborated methods wee verified on the basis of measurement results of knee-joint width space got from radiographs. Measurements were carried out by indirectly method on the digital images of radiographs. Results of examination confirmed legitimacy to using of elaborated methodology and measurement procedures. Such methodology has special importance when standard scientific ways didn't bring expectations effects.

A systematic review of objective burn scar measurements.

PubMed

Lee, Kwang Chear; Dretzke, Janine; Grover, Liam; Logan, Ann; Moiemen, Naiem

2016-01-01

Problematic scarring remains a challenging aspect to address in the treatment of burns and can significantly affect the quality of life of the burn survivor. At present, there are few treatments available in the clinic to control adverse scarring, but experimental pharmacological anti-scarring strategies are now beginning to emerge. Their comparative success must be based on objective measurements of scarring, yet currently the clinical assessment of scars is not carried out systematically and is mostly based on subjective review of patients. However, several techniques and devices are being introduced that allow objective analysis of the burn scar. The aim of this article is to evaluate various objective measurement tools currently available and recommend a useful panel that is suitable for use in clinical trials of anti-scarring therapies. A systematic literature search was done using the Web of Science, PubMed and Cochrane databases. The identified devices were then classified and grouped according to the parameters they measured. The tools were then compared and assessed in terms of inter- and intra-rater reproducibility, ease of use and cost. After duplicates were removed, 5062 articles were obtained in the search. After further screening, 157 articles which utilised objective burn scar measurement systems or tools were obtained. The scar measurement devices can be broadly classified into those measuring colour, metric variables, texture, biomechanical properties and pathophysiological disturbances. Objective scar measurement tools allow the accurate and reproducible evaluation of scars, which is important for both clinical and scientific use. However, studies to evaluate their relative performance and merits of these tools are scarce, and there remain factors, such as itch and pain, which cannot be measured objectively. On reviewing the available evidence, a panel of devices for objective scar measurement is recommended consisting of the 3D cameras (Eykona

Time-frequency analysis of acoustic scattering from elastic objects

NASA Astrophysics Data System (ADS)

Yen, Nai-Chyuan; Dragonette, Louis R.; Numrich, Susan K.

1990-06-01

A time-frequency analysis of acoustic scattering from elastic objects was carried out using the time-frequency representation based on a modified version of the Wigner distribution function (WDF) algorithm. A simple and efficient processing algorithm was developed, which provides meaningful interpretation of the scattering physics. The time and frequency representation derived from the WDF algorithm was further reduced to a display which is a skeleton plot, called a vein diagram, that depicts the essential features of the form function. The physical parameters of the scatterer are then extracted from this diagram with the proper interpretation of the scattering phenomena. Several examples, based on data obtained from numerically simulated models and laboratory measurements for elastic spheres and shells, are used to illustrate the capability and proficiency of the algorithm.

An Improved Suite of Object Oriented Software Measures

NASA Technical Reports Server (NTRS)

Neal, Ralph D.; Weistroffer, H. Roland; Coppins, Richard J.

1997-01-01

In the pursuit of ever increasing productivity, the need to be able to measure specific aspects of software is generally agreed upon. As object oriented programming languages are becoming more and more widely used, metrics specifically designed for object oriented software are required. In recent years there has been an explosion of new, object oriented software metrics proposed in the literature. Unfortunately, many or most of these proposed metrics have not been validated to measure what they claim to measure. In fact, an analysis of many of these metrics shows that they do not satisfy basic properties of measurement theory, and thus their application has to be suspect. In this paper ten improved metrics are proposed and are validated using measurement theory.

X-ray Timing Measurements

NASA Technical Reports Server (NTRS)

Strohmayer, T.

2008-01-01

We present new, extended X-ray timing measurements of the ultra-compact binary candidates V407 Vul and RX J0806.3+1527 (J0806), as well as a summary of the first high resolution X-ray spectra of 50806 obtained with the Chandra/LETG. The temporal baseline for both objects is approximately 12 years, and our measurements confirm the secular spin-up in their X-ray periods. The spin-up rate in 50806 is remarkably uniform at 3.55x10(exp -16)Hz/s, with a measurement precision of 0.2%. We place a limit (90% confidence) on 1 d dot nu < 4x10(exp -26)Hz/sq s. Interestingly, for V407 Vul we find the first evidence that the spin-up rate is slowing, with d dot\

Factors associated with objectively measured total sedentary time and screen time in children aged 9-11 years.

PubMed

Ferrari, Gerson Luis de Moraes; Pires, Carlos; Solé, Dirceu; Matsudo, Victor; Katzmarzyk, Peter T; Fisberg, Mauro

2018-01-04

To identify factors associated with total sedentary time and screen time in children aged 9-11 years. For seven consecutive days, 328 children (51.5% boys) used accelerometers to monitor total sedentary time. Screen time was calculated by the self-reporting method. Individual, family, family environment, and school environment questionnaires were filled out. Body composition was measured using a Tanita scale. The mean sedentary time was 500min/day (boys: 489, girls: 511, p=0.005), and mean screen time was 234min/day (boys: 246, girls: 222, p=0.053). In both genders, factors associated with sedentary time were healthy dietary pattern and moderate-to-vigorous physical activity. In boys, only moderate-to-vigorous physical activity was significant; in girls, the healthy dietary pattern, moderate-to-vigorous physical activity, and transportation to school were significant. As for the screen time, the associated factors were body mass index and healthy dietary pattern (both genders). In boys, the associated factors were body mass index, healthy dietary pattern, and television in the bedroom. In girls, the associated factors were healthy dietary pattern, transportation to school, and physical activity policies or practice at school. Several associated factors were identified in the association between total sedentary time and screen time in children; however, only the healthy dietary pattern was common between sedentary time and screen time. Copyright © 2017. Published by Elsevier Editora Ltda.

Objectively measured physical activity and sedentary time in youth: the International children's accelerometry database (ICAD).

PubMed

Cooper, Ashley R; Goodman, Anna; Page, Angie S; Sherar, Lauren B; Esliger, Dale W; van Sluijs, Esther M F; Andersen, Lars Bo; Anderssen, Sigmund; Cardon, Greet; Davey, Rachel; Froberg, Karsten; Hallal, Pedro; Janz, Kathleen F; Kordas, Katarzyna; Kreimler, Susi; Pate, Russ R; Puder, Jardena J; Reilly, John J; Salmon, Jo; Sardinha, Luis B; Timperio, Anna; Ekelund, Ulf

2015-09-17

Physical activity and sedentary behaviour in youth have been reported to vary by sex, age, weight status and country. However, supporting data are often self-reported and/or do not encompass a wide range of ages or geographical locations. This study aimed to describe objectively-measured physical activity and sedentary time patterns in youth. The International Children's Accelerometry Database (ICAD) consists of ActiGraph accelerometer data from 20 studies in ten countries, processed using common data reduction procedures. Analyses were conducted on 27,637 participants (2.8-18.4 years) who provided at least three days of valid accelerometer data. Linear regression was used to examine associations between age, sex, weight status, country and physical activity outcomes. Boys were less sedentary and more active than girls at all ages. After 5 years of age there was an average cross-sectional decrease of 4.2% in total physical activity with each additional year of age, due mainly to lower levels of light-intensity physical activity and greater time spent sedentary. Physical activity did not differ by weight status in the youngest children, but from age seven onwards, overweight/obese participants were less active than their normal weight counterparts. Physical activity varied between samples from different countries, with a 15-20% difference between the highest and lowest countries at age 9-10 and a 26-28% difference at age 12-13. Physical activity differed between samples from different countries, but the associations between demographic characteristics and physical activity were consistently observed. Further research is needed to explore environmental and sociocultural explanations for these differences.

First ultraviolet reflectance measurements of several Kuiper Belt objects, Kuiper Belt object satellites, and new ultraviolet measurements of A Centaur

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stern, S. A.; Schindhelm, E.; Cunningham, N. J., E-mail: astern@swri.edu

We observed the 2600-3200 Å (hereafter, mid-UV) reflectance of two Kuiper Belt Objects (KBOs), two KBO satellites, and a Centaur, using the Hubble Space Telescope (HST) Cosmic Origins Spectrograph (COS). Other than measurements of the Pluto system, these constitute the first UV measurements obtained of KBOs, and KBO satellites, and new HST UV measurements of the Centaur 2060 Chiron. We find significant differences among these objects, constrain the sizes and densities of Haumea's satellites, and report the detection of a possible spectral absorption band in Haumea's spectrum near 3050 Å. Comparisons of these objects to previously published UV reflectance measurementsmore » of Pluto and Charon are also made here.« less

Light sensors for objective light measurement in ambulatory polysomnography.

PubMed

Schembri, Rachel; Spong, Jo; Peters, Allison; Rochford, Peter; Wilksch, Philip; O'Donoghue, Fergal J; Greenwood, Kenneth M; Barnes, Maree; Kennedy, Gerard A; Berlowitz, David J

2017-01-01

Ambulatory polysomnography (PSG) does not commonly include an objective measure of light to determine the time of lights off (Loff), and thus cannot be used to calculate important indices such as sleep onset latency and sleep efficiency. This study examined the technical specifications and appropriateness of a prototype light sensor (LS) for use in ambulatory Compumedics Somte PSG.Two studies were conducted. The first examined the light measurement characteristics of the LS when used with a portable PSG device, specifically recording trace range, linearity, sensitivity, and stability. This involved the LS being exposed to varying incandescent and fluorescent light levels in a light controlled room. Secondly, the LS was trialled in 24 home and 12 hospital ambulatory PSGs to investigate whether light levels in home and hospital settings were within the recording range of the LS, and to quantify the typical light intensity reduction at the time of Loff. A preliminary exploration of clinical utility was also conducted. Linearity between LS voltage and lux was demonstrated, and the LS trace was stable over 14 hours of recording. The observed maximum voltage output of the LS/PSG device was 250 mV, corresponding to a maximum recording range of 350 lux and 523 lux for incandescent and fluorescent light respectively. At the time of Loff, light levels were within the recording range of the LS, and on average dropped by 72 lux (9-245) in the home and 76 lux (4-348) in the hospital setting. Results suggest that clinical utility was greatest in hospital settings where patients are less mobile. The LS was a simple and effective objective marker of light level in portable PSG, which can be used to identify Loff in ambulatory PSG. This allows measurement of additional sleep indices and support with clinical decisions.

Planning and the "Measurable Objective."

ERIC Educational Resources Information Center

Miller, Ronald H.

1973-01-01

Accountability is being required of all America's institutions of higher education. Gallaudet College, an institution for the deaf in Washington, D.C., feels it has found a solution to the accountability problem in the use of "measurable objectives" in its program planning. The first phase from January 1 through June 30, 1972 of…

Emerging Object Representations in the Visual System Predict Reaction Times for Categorization

PubMed Central

Ritchie, J. Brendan; Tovar, David A.; Carlson, Thomas A.

2015-01-01

Recognizing an object takes just a fraction of a second, less than the blink of an eye. Applying multivariate pattern analysis, or “brain decoding”, methods to magnetoencephalography (MEG) data has allowed researchers to characterize, in high temporal resolution, the emerging representation of object categories that underlie our capacity for rapid recognition. Shortly after stimulus onset, object exemplars cluster by category in a high-dimensional activation space in the brain. In this emerging activation space, the decodability of exemplar category varies over time, reflecting the brain’s transformation of visual inputs into coherent category representations. How do these emerging representations relate to categorization behavior? Recently it has been proposed that the distance of an exemplar representation from a categorical boundary in an activation space is critical for perceptual decision-making, and that reaction times should therefore correlate with distance from the boundary. The predictions of this distance hypothesis have been born out in human inferior temporal cortex (IT), an area of the brain crucial for the representation of object categories. When viewed in the context of a time varying neural signal, the optimal time to “read out” category information is when category representations in the brain are most decodable. Here, we show that the distance from a decision boundary through activation space, as measured using MEG decoding methods, correlates with reaction times for visual categorization during the period of peak decodability. Our results suggest that the brain begins to read out information about exemplar category at the optimal time for use in choice behaviour, and support the hypothesis that the structure of the representation for objects in the visual system is partially constitutive of the decision process in recognition. PMID:26107634

The Assignment of Scale to Object-Oriented Software Measures

NASA Technical Reports Server (NTRS)

Neal, Ralph D.; Weistroffer, H. Roland; Coppins, Richard J.

1997-01-01

In order to improve productivity (and quality), measurement of specific aspects of software has become imperative. As object oriented programming languages have become more widely used, metrics designed specifically for object-oriented software are required. Recently a large number of new metrics for object- oriented software has appeared in the literature. Unfortunately, many of these proposed metrics have not been validated to measure what they purport to measure. In this paper fifty (50) of these metrics are analyzed.

Thickness and air gap measurement of assembled IR objectives

NASA Astrophysics Data System (ADS)

Lueerss, B.; Langehanenberg, P.

2015-05-01

A growing number of applications like surveillance, thermography, or automotive demand for infrared imaging systems. Their imaging performance is significantly influenced by the alignment of the individual lens elements. Besides the lateral orientation of lenses, the air spacing between the lenses is a crucial parameter. Because of restricted mechanical accessibility within an assembled objective, a non-contact technique is required for the testing of these parameters. So far commercial measurement systems were not available for testing of IR objectives since many materials used for infrared imaging are non-transparent at wavelengths below 2 μm. We herewith present a time-domain low coherent interferometer capable of measuring any kind of infrared material (e.g., Ge, Si, etc.) as well as VIS materials. The fiber-optic set-up is based on a Michelson-Interferometer in which the light from a broadband super-luminescent diode is split into a reference arm with a variable optical delay and a measurement arm where the sample is placed. On a photo detector, the reflected signals from both arms are superimposed and recorded as a function of the variable optical path. Whenever the group delay difference is zero, a coherence peak occurs and the relative lens' surface distances are derived from the optical delay. In order to penetrate IR materials, the instrument operates at 2.2 μm. The set-up allows the contactless determination of thicknesses and air gaps inside of assembled infrared objective lenses with accuracy in the micron range. It therefore is a tool for the precise manufacturing or quality control.

Thickness and air gap measurement of assembled IR objectives

NASA Astrophysics Data System (ADS)

Lueerss, B.; Langehanenberg, P.

2015-10-01

A growing number of applications like surveillance, thermography, or automotive demand for infrared imaging systems. Their imaging performance is significantly influenced by the alignment of the individual lenses. Besides the lateral orientation of lenses, the air spacing between the lenses is a crucial parameter. Because of restricted mechanical accessibility within an assembled objective, a non-contact technique is required for the testing of these parameters. So far, commercial measurement systems were not available for testing of IR objectives since most materials used for infrared imaging are non-transparent at wavelengths below 2 μm. We herewith present a time-domain low coherent interferometer capable of measuring any kind of infrared material (e.g., Ge, Si, etc.) as well as VIS materials. The set-up is based on a Michelson interferometer in which the light from a broadband superluminescent diode is split into a reference arm with a variable optical delay and a measurement arm where the sample is placed. On a detector, the reflected signals from both arms are superimposed and recorded as a function of the variable optical path. Whenever the group delay difference is zero, a coherence peak occurs and the relative distances of the lens surfaces are derived from the optical delay. In order to penetrate IR materials, the instrument operates at 2.2 μm. Together with an LWIR autocollimator, this technique allows for the determination of centering errors, lens thicknesses and air spacings of assembled IR objective lenses with a micron accuracy. It is therefore a tool for precision manufacturing and quality control.

Objective and subjective measurement of sleep disturbance in female trauma survivors with posttraumatic stress disorder.

PubMed

Werner, Kimberly B; Griffin, Michael G; Galovski, Tara E

2016-06-30

Sleep disturbance may be the most often endorsed symptom of posttraumatic stress disorder (PTSD). Much of this research is based on subjective reports from trauma survivors; however, objective measures of sleep-related impairment have yielded findings inconsistent with self-report data. More studies investigating subjective and objective assessments concordantly are needed to understand sleep impairment in PTSD. The current study examined PTSD-related sleep disturbance in a female interpersonal violence cohort with full PTSD diagnoses (N=51) assessing subjective (global and daily diary measures) and objective (actigraphy) sleep measures concurrently. PTSD severity was positively associated with global, subjective reports of sleep impairment and insomnia. Subjective measures of sleep (including global sleep impairment, insomnia, and daily sleep diary reports of total sleep time, sleep efficiency, and sleep onset latency) were moderately to strongly correlated. However, no significant correlations between subjective and objective reports of sleep impairment were found in this cohort. Analyses demonstrated an overall elevation in subjectively reported sleep impairment when compared to objective measurement assessed concurrently. Findings demonstrate a lack of agreement between subjective and objective measurements of sleep in a PTSD-positive female cohort, suggesting objective and subjective sleep impairments are distinct sleep parameters that do not necessarily directly co-vary. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

A Fuzzy Description Logic with Automatic Object Membership Measurement

NASA Astrophysics Data System (ADS)

Cai, Yi; Leung, Ho-Fung

In this paper, we propose a fuzzy description logic named f om -DL by combining the classical view in cognitive psychology and fuzzy set theory. A formal mechanism used to determine object memberships automatically in concepts is also proposed, which is lacked in previous work fuzzy description logics. In this mechanism, object membership is based on the defining properties of concept definition and properties in object description. Moreover, while previous works cannot express the qualitative measurements of an object possessing a property, we introduce two kinds of properties named N-property and L-property, which are quantitative measurements and qualitative measurements of an object possessing a property respectively. The subsumption and implication of concepts and properties are also explored in our work. We believe that it is useful to the Semantic Web community for reasoning the fuzzy membership of objects for concepts in fuzzy ontologies.

Resolving human object recognition in space and time

PubMed Central

Cichy, Radoslaw Martin; Pantazis, Dimitrios; Oliva, Aude

2014-01-01

A comprehensive picture of object processing in the human brain requires combining both spatial and temporal information about brain activity. Here, we acquired human magnetoencephalography (MEG) and functional magnetic resonance imaging (fMRI) responses to 92 object images. Multivariate pattern classification applied to MEG revealed the time course of object processing: whereas individual images were discriminated by visual representations early, ordinate and superordinate category levels emerged relatively later. Using representational similarity analysis, we combine human fMRI and MEG to show content-specific correspondence between early MEG responses and primary visual cortex (V1), and later MEG responses and inferior temporal (IT) cortex. We identified transient and persistent neural activities during object processing, with sources in V1 and IT., Finally, human MEG signals were correlated to single-unit responses in monkey IT. Together, our findings provide an integrated space- and time-resolved view of human object categorization during the first few hundred milliseconds of vision. PMID:24464044

Development and initial assessment of objective fatigue measures for apple harvest work.

PubMed

Earle-Richardson, Giulia; Jenkins, Paul L; Strogatz, David; Bell, Erin M; May, John J

2006-11-01

Previous research has shown that neck, back and shoulder musculoskeletal strain is a major occupational health problem affecting migrant orchard harvest workers. Researchers seek to measure the effect of an ergonomic modification to the apple picking bucket on muscle fatigue, however objective measures for use in the orchard are not yet available. The purpose of this study is to develop simple back, shoulder or arm strength measures, which detect statistically significant drops in strength over one workday. Candidate muscle strength measures were piloted in the laboratory, adapted for the orchard and evaluated (n=102). Data were analyzed for morning to afternoon fatigue, and for correlation between fatigue score and hours worked. In the laboratory, the timed arm hold (35.7% time reduction, 95% CI: 21.81-49.61), and the timed spinal extension (31.8% time reduction, 95% CI: 23.54-39.96) showed significant fatigue. In the orchard (n=102), only the timed arm hold showed significant (11.4%, p<.0001) fatigue. The potential effect of field conditions and subject motivation on these results needs further exploration.

Relationship Between Reported and Measured Sleep Times

PubMed Central

Silva, Graciela E.; Goodwin, James L.; Sherrill, Duane L.; Arnold, Jean L.; Bootzin, Richard R.; Smith, Terry; Walsleben, Joyce A.; Baldwin, Carol M.; Quan, Stuart F.

2007-01-01

Study Objective: Subjective and objective assessments of sleep may be discrepant due to sleep misperception and measurement effects, the latter of which may change the quality and quantity of a person's usual sleep. This study compared sleep times from polysomnography (PSG) with self-reports of habitual sleep and sleep estimated on the morning after a PSG in adults. Design: Total sleep time and sleep onset latency obtained from unattended home PSGs were compared to sleep times obtained from a questionnaire completed before the PSG and a Morning Survey completed the morning after the PSG. Participants: A total of 2,113 subjects who were ≥ 40 years of age were included in this analysis. Measures and Results: Subjects were 53% female, 75% Caucasian, and 38% obese. The mean habitual sleep time (HABTST), morning estimated sleep time (AMTST), and PSG total sleep times (PSGTST) were 422 min, 379 min, and 363 min, respectively. The mean habitual sleep onset latency, morning estimated sleep onset latency, and PSG sleep onset latency were 17.0 min, 21.8 min, and 16.9 min, respectively. Models adjusting for related demographic factors showed that HABTST and AMTST differ significantly from PSGTST by 61 and 18 minutes, respectively. Obese and higher educated people reported less sleep time than their counterparts. Similarly, small but significant differences were seen for sleep latency. Conclusions: In a community population, self-reported total sleep times and sleep latencies are overestimated even on the morning following overnight PSG. Citation: Silva GE; Goodwin JL; Sherrill DL; Arnold JL; Bootzin RR; Smith T; Walsleben JA; Baldwin CM; Quan SF. Relationship between reported and measured sleep times: the sleep heart health study (SHHS). J Clin Sleep Med 2007;3(6):622-630. PMID:17993045

Multi-objective and Perishable Fuzzy Inventory Models Having Weibull Life-time With Time Dependent Demand, Demand Dependent Production and Time Varying Holding Cost: A Possibility/Necessity Approach

NASA Astrophysics Data System (ADS)

Pathak, Savita; Mondal, Seema Sarkar

2010-10-01

A multi-objective inventory model of deteriorating item has been developed with Weibull rate of decay, time dependent demand, demand dependent production, time varying holding cost allowing shortages in fuzzy environments for non- integrated and integrated businesses. Here objective is to maximize the profit from different deteriorating items with space constraint. The impreciseness of inventory parameters and goals for non-integrated business has been expressed by linear membership functions. The compromised solutions are obtained by different fuzzy optimization methods. To incorporate the relative importance of the objectives, the different cardinal weights crisp/fuzzy have been assigned. The models are illustrated with numerical examples and results of models with crisp/fuzzy weights are compared. The result for the model assuming them to be integrated business is obtained by using Generalized Reduced Gradient Method (GRG). The fuzzy integrated model with imprecise inventory cost is formulated to optimize the possibility necessity measure of fuzzy goal of the objective function by using credibility measure of fuzzy event by taking fuzzy expectation. The results of crisp/fuzzy integrated model are illustrated with numerical examples and results are compared.

Prospective analysis of time out-of-home and objectively measured walking duration during a week in a large cohort of older adults.

PubMed

Rapp, Kilian; Mikolaizak, Stefanie; Rothenbacher, Dietrich; Denkinger, Michael D; Klenk, Jochen

2018-01-01

Physical activity is considered an effective measure to promote health in older people. There is evidence that the number of outdoor trips increases physical activity by increasing walking duration. The objective of this study was to analyse the relationship between daily time out-of-home and walking duration. Furthermore, predictors for walking duration and time out-of-home were evaluated. Walking duration was measured prospectively over a 1 week period by a body-fixed sensor and the time out-of-home was assessed by a questionnaire at the same days. Seven thousand, two hundred and forty-three days from 1289 older people (mean age 75.4 years) with both sensor-based measures and completed questionnaires were included in the analyses. To account for several observation days per participant multilevel regression analyses were applied. Analyses were stratified according to the time out-of-home (more or less than 100 min/day). In the group with less than 100 min out-of-home, each additional minute out-of-home added 20 s to overall walking duration. If the time exceeded 100 min the additional increase of walking duration was only moderate or weak. Leaving the home once added 40 min of walking, the following trips 15 to 20 min. Increasing age, lower gait speed, comorbidities, low temperature, rain and specific week days (Sunday) decreased both the time out-of-home and walking duration. Other variables like gender (female), isolation or living with a spouse reduced the time out-of-home without affecting walking duration. Being out-of-home increases daily walking duration. The association is strongest if the time out-of-home is 100 min or less.

Modeling the Object-Oriented Space Through Validated Measures

NASA Technical Reports Server (NTRS)

Neal, Ralph D.

1996-01-01

In order to truly understand software and the software development process, software measurement must be better understood. A beginning step toward a better understanding of software measurement is the categorization of the measurements by some meaningful taxonomy. The most meaningful taxonomy would capture the basic nature of the subject oriented (O-O) space. The interesting characteristics of object oriented software offer a starting point for such a categorization of measures. A taxonomy has been developed based on fourteen characteristics of object-oriented software gathered from the literature This taxonomy allows us to easily see gaps and redundancies in the O-O measures. The taxonomy also clearly differentiates among taxa so that there is no ambiguity as to the taxon to which a measure belongs. The taxonomy has been populated with thirty-two measures that have been validated in the narrow sense of Fenton, using measurement theory with Zuse's augmentation.

Consistency between subjectively and objectively measured hazard perception skills among young male drivers.

PubMed

Ābele, Līva; Haustein, Sonja; Møller, Mette; Martinussen, Laila M

2018-03-01

Young male drivers have lower hazard perception skills (HPS) than older and more experienced drivers and a tendency to overestimate their skills in hazardous situations. Both factors contribute to an over-representation in traffic accidents. Based on a sample of 63 drivers aged 18-24, this study compares the consistency of HPS measured by objective and subjective measures and the link between these measures is the key contribution of the study. Both visible and hidden hazards are included. Objective measures of HPS include responsiveness and eye movements while driving in a driving simulator. Subjective measures of HPS include self-reports derived based on the Hazard Perception Questionnaire (HPQ), Driving Skill Questionnaire (DSQ), and Brief Sensation Seeking Scale (BSSS). Results show that drivers who respond to the hazards on time, as compared to drivers who do not respond, have higher scores on subjective measures of HPS and higher driving skills in the visible but not in the hidden condition. Eye movement analysis confirms the difference and shows that response in time to hazards indicate higher HPS and young drivers are poor at detecting hidden hazards. Drivers with a response in time locate the hazard faster, have more fixations, but dwell less on the hazard. At the same time, those who do not respond have a later first fixation and fewer but longer fixations on the hazard. High sensation seeking drivers respond to visible hazards on time, suggesting that sensation seeking does not affect HPS negatively when the hazard is visible. To enhance the HPS among young drivers, the results of this study suggest that specific hazard perception training is relevant, especially for hazards that require more advanced HPS. Copyright © 2018 Elsevier Ltd. All rights reserved.

Speckle correlation method used to measure object's in-plane velocity.

PubMed

Smíd, Petr; Horváth, Pavel; Hrabovský, Miroslav

2007-06-20

We present a measurement of an object's in-plane velocity in one direction by the use of the speckle correlation method. Numerical correlations of speckle patterns recorded periodically during motion of the object under investigation give information used to evaluate the object's in-plane velocity. The proposed optical setup uses a detection plane in the image field and enables one to detect the object's velocity within the interval (10-150) microm x s(-1). Simulation analysis shows a way of controlling the measuring range. The presented theory, simulation analysis, and setup are verified through an experiment of measurement of the velocity profile of an object.

Temperature grid sensor for the measurement of spatial temperature distributions at object surfaces.

PubMed

Schäfer, Thomas; Schubert, Markus; Hampel, Uwe

2013-01-25

This paper presents results of the development and application of a new temperature grid sensor based on the wire-mesh sensor principle. The grid sensor consists of a matrix of 256 Pt1000 platinum chip resistors and an associated electronics that measures the grid resistances with a multiplexing scheme at high speed. The individual sensor elements can be spatially distributed on an object surface and measure transient temperature distributions in real time. The advantage compared with other temperature field measurement approaches such as infrared cameras is that the object under investigation can be thermally insulated and the radiation properties of the surface do not affect the measurement accuracy. The sensor principle is therefore suited for various industrial monitoring applications. Its applicability for surface temperature monitoring has been demonstrated through heating and mixing experiments in a vessel.

Tracking multiple objects is limited only by object spacing, not by speed, time, or capacity.

PubMed

Franconeri, S L; Jonathan, S V; Scimeca, J M

2010-07-01

In dealing with a dynamic world, people have the ability to maintain selective attention on a subset of moving objects in the environment. Performance in such multiple-object tracking is limited by three primary factors-the number of objects that one can track, the speed at which one can track them, and how close together they can be. We argue that this last limit, of object spacing, is the root cause of all performance constraints in multiple-object tracking. In two experiments, we found that as long as the distribution of object spacing is held constant, tracking performance is unaffected by large changes in object speed and tracking time. These results suggest that barring object-spacing constraints, people could reliably track an unlimited number of objects as fast as they could track a single object.

A comparison of subjective and objective measures of physical activity from the Newcastle 85+ study.

PubMed

Innerd, Paul; Catt, Michael; Collerton, Joanna; Davies, Karen; Trenell, Michael; Kirkwood, Thomas B L; Jagger, Carol

2015-07-01

Little is known about physical activity (PA) in the very old, the fastest growing age group in the population. We aimed to examine the convergent validity of subjective and objective measures of PA in adults aged over 85 years. A total of 484 participants aged 87-89 years recruited to the Newcastle 85+ study completed a purpose-designed physical activity questionnaire (PAQ), which categorised participants as mildly active, moderately active and very active. Out of them, 337 participants wore a triaxial, raw accelerometer on the right wrist over a 5-7-day period to obtain objective measures of rest/activity, PA intensity and PA type. Data from subjective and objective measurement methods were compared. Self-reported PA was significantly associated with objective measures of the daily sedentary time, low-intensity PA and activity type classified as sedentary, activities of daily living and walking. Objective measures of PA were significantly different when low, moderate and high self-reported PA categories were compared (all P < 0.001). The Newcastle 85+ PAQ demonstrated convergent validity with objective measures of PA. Our findings suggest that this PAQ can be used in the very old to rank individuals according to their level of total PA. © The Author 2015. Published by Oxford University Press on behalf of the British Geriatrics Society.

Quantifying the Time Course of Visual Object Processing Using ERPs: It's Time to Up the Game

PubMed Central

Rousselet, Guillaume A.; Pernet, Cyril R.

2011-01-01

Hundreds of studies have investigated the early ERPs to faces and objects using scalp and intracranial recordings. The vast majority of these studies have used uncontrolled stimuli, inappropriate designs, peak measurements, poor figures, and poor inferential and descriptive group statistics. These problems, together with a tendency to discuss any effect p < 0.05 rather than to report effect sizes, have led to a research field very much qualitative in nature, despite its quantitative inspirations, and in which predictions do not go beyond condition A > condition B. Here we describe the main limitations of face and object ERP research and suggest alternative strategies to move forward. The problems plague intracranial and surface ERP studies, but also studies using more advanced techniques – e.g., source space analyses and measurements of network dynamics, as well as many behavioral, fMRI, TMS, and LFP studies. In essence, it is time to stop amassing binary results and start using single-trial analyses to build models of visual perception. PMID:21779262

Learning object correspondences with the observed transport shape measure.

PubMed

Pitiot, Alain; Delingette, Hervé; Toga, Arthur W; Thompson, Paul M

2003-07-01

We propose a learning method which introduces explicit knowledge to the object correspondence problem. Our approach uses an a priori learning set to compute a dense correspondence field between two objects, where the characteristics of the field bear close resemblance to those in the learning set. We introduce a new local shape measure we call the "observed transport measure", whose properties make it particularly amenable to the matching problem. From the values of our measure obtained at every point of the objects to be matched, we compute a distance matrix which embeds the correspondence problem in a highly expressive and redundant construct and facilitates its manipulation. We present two learning strategies that rely on the distance matrix and discuss their applications to the matching of a variety of 1-D, 2-D and 3-D objects, including the corpus callosum and ventricular surfaces.

The Real-Time ObjectAgent Software Architecture for Distributed Satellite Systems

DTIC Science & Technology

2001-01-01

real - time operating system selection are also discussed. The fourth section describes a simple demonstration of real-time ObjectAgent. Finally, the...experience with C++. After selecting the programming language, it was necessary to select a target real - time operating system (RTOS) and embedded...ObjectAgent software to run on the OSE Real Time Operating System . In addition, she is responsible for the integration of ObjectAgent

Wearable sensors objectively measure gait parameters in Parkinson’s disease

PubMed Central

Marxreiter, Franz; Gossler, Julia; Kohl, Zacharias; Reinfelder, Samuel; Gassner, Heiko; Aminian, Kamiar; Eskofier, Bjoern M.; Winkler, Jürgen; Klucken, Jochen

2017-01-01

Distinct gait characteristics like short steps and shuffling gait are prototypical signs commonly observed in Parkinson’s disease. Routinely assessed by observation through clinicians, gait is rated as part of categorical clinical scores. There is an increasing need to provide quantitative measurements of gait, e.g. to provide detailed information about disease progression. Recently, we developed a wearable sensor-based gait analysis system as diagnostic tool that objectively assesses gait parameter in Parkinson’s disease without the need of having a specialized gait laboratory. This system consists of inertial sensor units attached laterally to both shoes. The computed target of measures are spatiotemporal gait parameters including stride length and time, stance phase time, heel-strike and toe-off angle, toe clearance, and inter-stride variation from gait sequences. To translate this prototype into medical care, we conducted a cross-sectional study including 190 Parkinson’s disease patients and 101 age-matched controls and measured gait characteristics during a 4x10 meter walk at the subjects’ preferred speed. To determine intraindividual changes in gait, we monitored the gait characteristics of 63 patients longitudinally. Cross-sectional analysis revealed distinct spatiotemporal gait parameter differences reflecting typical Parkinson’s disease gait characteristics including short steps, shuffling gait, and postural instability specific for different disease stages and levels of motor impairment. The longitudinal analysis revealed that gait parameters were sensitive to changes by mirroring the progressive nature of Parkinson’s disease and corresponded to physician ratings. Taken together, we successfully show that wearable sensor-based gait analysis reaches clinical applicability providing a high biomechanical resolution for gait impairment in Parkinson’s disease. These data demonstrate the feasibility and applicability of objective wearable sensor

Contributions to Objective Measurement and Evaluation of Trainee Competency.

ERIC Educational Resources Information Center

Moonan, William J.

The purpose of this paper is to lay a basis for and discuss the components of a system, called COMET, designed to objectively measure and evaluate the competency of trainees in military training enterprises. COMET is an acronym for "Computerized Objective Measurement and Evaluation of Trainees." These goals will be accomplished by: (a)…

Detection of Objects Hidden in Highly Scattering Media Using Time-Gated Imaging Methods

NASA Technical Reports Server (NTRS)

Galland, Pierre A.; Wang, L.; Liang, X.; Ho, P. P.; Alfano, R. R.

2000-01-01

Non-intrusive and non-invasive optical imaging techniques has generated great interest among researchers for their potential applications to biological study, device characterization, surface defect detection, and jet fuel dynamics. Non-linear optical parametric amplification gate (NLOPG) has been used to detect back-scattered images of objects hidden in diluted Intralipid solutions. To directly detect objects hidden in highly scattering media, the diffusive component of light needs to be sorted out from early arrived ballistic and snake photons. In an optical imaging system, images are collected in transmission or back-scattered geometry. The early arrival photons in the transmission approach, always carry the direct information of the hidden object embedded in the turbid medium. In the back-scattered approach, the result is not so forth coming. In the presence of a scattering host, the first arrival photons in back-scattered approach will be directly photons from the host material. In the presentation, NLOPG was applied to acquire time resolved back-scattered images under the phase matching condition. A time-gated amplified signal was obtained through this NLOPG process. The system's gain was approximately 100 times. The time-gate was achieved through phase matching condition where only coherent photons retain their phase. As a result, the diffusive photons, which were the primary contributor to the background, were removed. With a large dynamic range and high resolution, time-gated early light imaging has the potential for improving rocket/aircraft design by determining jets shape and particle sizes. Refinements to these techniques may enable drop size measurements in the highly scattering, optically dense region of multi-element rocket injectors. These types of measurements should greatly enhance the design of stable, and higher performing rocket engines.

The 1986/87 Army Communications Objectives Measurement System: Supplementary Tabulations of Enlisted Markets

DTIC Science & Technology

1988-07-01

and SEdward 11oke (We tat) 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF REPORT (Year, Month, Day) 15. PAGE COUNT Interim FROM 86/10 TO 87/06...TABULATIONS OF ENLISTED MARKETS 1. INTRODUCTION The Aray Communications Objectives Measurement System survey has been designed to provide timely information to...1987. During that time 6774 youth, ages 16 through 24, com- pleted the 30 minute ACOMS youth interview. A similar volume is also available for the

Photogrammetric Measurements of Heritage Objects

NASA Astrophysics Data System (ADS)

Tumeliene, E.; Nareiko, V.; Suziedelyte Visockiene, J.

2017-12-01

Cultural heritage is an invaluable example of human culture and creativity. The majority of them can become unstable or can be destroyed due to a combination of human and natural disturbances. In order to restore, preserve, and systematize data about architectural heritage objects, it is necessary to have geodetic, photogrammetric measurements of such data and to constantly monitor condition of the objects. The data of immovable cultural objects for many years are stored in photogrammetric data archives. Such archives have Germany, Lithuania, England and other countries. The article gives a brief introduction of the history of data archives formation and presents a photogrammetric and modern methods of modelling the spatial geometric properties of objects currently used to reveal immovable cultural properties and to evaluate geometric sizes. The pilot work was done with the Concept Capture simulation program that was developed by the Bentley company with photos of the Blessed Virgin Mary painting in Pivašiūnai of Trakai district. A shot from the ground with 12.4 MP resolution Pentax K-x camera was done using lenses with different focal lengths. The painting of the Blessed Virgin Mary is coordinated by 4 reference geodesic points and therefore after the modelling work it was possible to evaluate the accuracy of the created model. Based on the results of the spatial (3D) model, photo shooting and modelling recommendations are presented, the advantages of the new technology are distinguished.

ASUPT Automated Objective Performance Measurement System.

ERIC Educational Resources Information Center

Waag, Wayne L.; And Others

To realize its full research potential, a need exists for the development of an automated objective pilot performance evaluation system for use in the Advanced Simulation in Undergraduate Pilot Training (ASUPT) facility. The present report documents the approach taken for the development of performance measures and also presents data collected…

Apparatus for measuring surface movement of an object that is subjected to external vibrations

DOEpatents

Kotidis, Petros A.; Woodroffe, Jaime A.; Rostler, Peter S.

1997-01-01

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

Method and apparatus for measuring surface movement of an object using a polarizing interfeometer

DOEpatents

Schultz, Thomas J.; Kotidis, Petros A.; Woodroffe, Jaime A.; Rostler, Peter S.

1995-01-01

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

Method and apparatus for measuring surface movement of an object using a polarizing interferometer

DOEpatents

Schultz, T.J.; Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

1995-05-09

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figs.

Apparatus for measuring surface movement of an object that is subjected to external vibrations

DOEpatents

Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

1997-04-22

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figs.

[Metrological analysis of measuring systems in testing an anticipatory reaction to the position of a moving object].

PubMed

Aksiuta, E F; Ostashev, A V; Sergeev, E V; Aksiuta, V E

1997-01-01

The methods of the information (entropy) error theory were used to make a metrological analysis of the well-known commercial measuring systems for timing an anticipative reaction (AR) to the position of a moving object, which is based on the electromechanical, gas-discharge, and electron principles. The required accuracy of measurement was ascertained to be achieved only by using the systems based on the electron principle of moving object simulation and AR measurement.

The Applicability of Proposed Object-Oriented Metrics to Developer Feedback in Time to Impact Development

NASA Technical Reports Server (NTRS)

Neal, Ralph D.

1996-01-01

This paper looks closely at each of the software metrics generated by the McCabe object-Oriented Tool(TM) and its ability to convey timely information to developers. The metrics are examined for meaningfulness in terms of the scale assignable to the metric by the rules of measurement theory and the software dimension being measured. Recommendations are made as to the proper use of each metric and its ability to influence development at an early stage. The metrics of the McCabe Object-Oriented Tool(TM) set were selected because of the tool's use in a couple of NASA IV&V projects.

The better way to determine the validity, reliability, objectivity and accuracy of measuring devices.

PubMed

Pazira, Parvin; Rostami Haji-Abadi, Mahdi; Zolaktaf, Vahid; Sabahi, Mohammadfarzan; Pazira, Toomaj

2016-06-08

In relation to statistical analysis, studies to determine the validity, reliability, objectivity and precision of new measuring devices are usually incomplete, due in part to using only correlation coefficient and ignoring the data dispersion. The aim of this study was to demonstrate the best way to determine the validity, reliability, objectivity and accuracy of an electro-inclinometer or other measuring devices. Another purpose of this study is to answer the question of whether reliability and objectivity represent accuracy of measuring devices. The validity of an electro-inclinometer was examined by mechanical and geometric methods. The objectivity and reliability of the device was assessed by calculating Cronbach's alpha for repeated measurements by three raters and by measurements on the same person by mechanical goniometer and the electro-inclinometer. Measurements were performed on "hip flexion with the extended knee" and "shoulder abduction with the extended elbow." The raters measured every angle three times within an interval of two hours. The three-way ANOVA was used to determine accuracy. The results of mechanical and geometric analysis showed that validity of the electro-inclinometer was 1.00 and level of error was less than one degree. Objectivity and reliability of electro-inclinometer was 0.999, while objectivity of mechanical goniometer was in the range of 0.802 to 0.966 and the reliability was 0.760 to 0.961. For hip flexion, the difference between raters in joints angle measurement by electro-inclinometer and mechanical goniometer was 1.74 and 16.33 degree (P<0.05), respectively. The differences for shoulder abduction measurement by electro-inclinometer and goniometer were 0.35 and 4.40 degree (P<0.05). Although both the objectivity and reliability are acceptable, the results showed that measurement error was very high in the mechanical goniometer. Therefore, it can be concluded that objectivity and reliability alone cannot determine the accuracy

Objective measures of situation awareness in a simulated medical environment

PubMed Central

Wright, M; Taekman, J; Endsley, M

2004-01-01

One major limitation in the use of human patient simulators is a lack of objective, validated measures of human performance. Objective measures are necessary if simulators are to be used to evaluate the skills and training of medical practitioners and teams or to evaluate the impact of new processes or equipment design on overall system performance. Situation awareness (SA) refers to a person's perception and understanding of their dynamic environment. This awareness and comprehension is critical in making correct decisions that ultimately lead to correct actions in medical care settings. An objective measure of SA may be more sensitive and diagnostic than traditional performance measures. This paper reviews a theory of SA and discusses the methods required for developing an objective measure of SA within the context of a simulated medical environment. Analysis and interpretation of SA data for both individual and team performance in health care are also presented. PMID:15465958

Time-resolved infrared spectrophotometric observations of high area to mass ratio (HAMR) objects in GEO

NASA Astrophysics Data System (ADS)

Skinner, Mark A.; Russell, Ray W.; Rudy, Richard J.; Gutierrez, David J.; Kim, Daryl L.; Crawford, Kirk; Gregory, Steve; Kelecy, Tom

2011-12-01

Optical surveys have identified a class of high area-to-mass ratio (HAMR) objects in the vicinity of the Geostationary Earth Orbit (GEO) ring [1]. The exact origin and nature of these objects are not well known, although their proximity to the GEO ring poses a hazard to active GEO satellites. Due to their high area-to-mass ratios, solar radiation pressure perturbs their orbits in ways that makes it difficult to predict their orbital trajectories over periods of time exceeding a week. To better understand these objects and their origins, observations that allow us to derive physical characteristics are required in order to improve the non-conservative force modeling for orbit determination and prediction. Information on their temperatures, areas, emissivities, and albedos may be obtained from thermal infrared, mid-wave infrared (MWIR), and visible measurements. Spectral features may help to identify the composition of the material, and thus possible origins for these objects. We have collected observational data on various HAMR objects from the AMOS observatory 3.6 m AEOS telescope. The thermal-IR spectra of these low-earth orbit objects acquired by the Broadband Array Spectrograph System (BASS) span wavelengths 3-13 μm and constitute a unique data set, providing a means of measuring, as a function of time, object fluxes. These, in turn, allow temperatures and emissivity-area products to be calculated. In some instances we have also collected simultaneous filtered visible photometric data on the observed objects. The multi-wavelength observations of the objects provide possible clues as to the nature of the observed objects. We describe briefly the nature and status of the instrumental programs used to acquire the data, our data of record, our data analysis techniques, and our current results, as well as future plans.

Association between objectively measured physical activity, chronic stress and leukocyte telomere length.

PubMed

von Känel, Roland; Bruwer, Erna J; Hamer, Mark; de Ridder, J Hans; Malan, Leoné

2017-10-01

Physical activity (PA) attenuates chronic stress and age-related and cardiovascular disease risks, whereby potentially slowing telomere shortening. We aimed to study the association between seven-day objectively measured habitual PA, chronic stress and leukocyte telomere length. Study participants were African (N.=96) and Caucasian (N.=107) school teachers of the Sympathetic activity and Ambulatory Blood Pressure in Africans study. All lifestyle characteristics (including PA) were objectively measured. The general health questionnaire and serum cortisol were assessed as psychological and physical measures of chronic stress. Leukocyte telomere length was measured using the quantitative real-time polymerase chain reaction. Africans had significantly shorter telomeres (P<.0001) and greater psychological distress (P=0.001) than Caucasians, whereas no group difference was seen for cortisol levels. Higher age (ß=-0.28 [-0.40, -0.16, P≤0.000), higher alcohol consumption (ß=-0.21 [-0.36, -0.08], P=0.003) and increased central obesity (ß=-0.17 [-0.30, -0.03], P=0.017) were all significantly associated with shorter telomeres. Habitual PA of different intensity was not significantly associated with markers of chronic stress or telomere length. However, more time spent with light intensity PA time was significantly and independently correlated with lower waist circumference (r=-0.21, P=0.004); in turn, greater waist circumference was significantly associated shorter telomeres (β=-0.17 [-0.30, -0.03], P=0.017). Habitual PA of different intensity was not directly associated with markers of chronic stress and leukocyte telomere length in this biethnic cohort. However, our findings suggest that light intensity PA could contribute to lowered age-related disease risk and healthy ageing by facilitating maintenance of a normal waist circumference.

Measurements Conducted on an Unknown Object Labeled Pu-239

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoteling, Nathan

Measurements were carried out on 12 November 2013 to determine whether Pu-239 was present on an object discovered in a plastic bag with label “Pu-­239 6 uCi.” Following initial survey measurements to verify that the object was not leaking or contaminated, spectra were collected with a High Purity Germanium (HPGe) detector with object positioned in two different configurations. Analysis of the spectra did not yield any direct evidence of Pu-­239. From the measured spectra, minimum detectable activity (MDA) was determined to be approximately 2 uCi for the gamma-­ray measurements. Although there was no direct evidence of Pu-239, a peak atmore » 60 keV characteristic of Am-­241 decay was observed. Since it is very likely that Am-­241 would be present in aged plutonium samples, this was interpreted as indirect evidence for the presence of plutonium on the object. Analysis of this peak led to an estimated Pu-­239 activity of 0.02–0.04 uCi, or <1x10 -6 grams.« less

A Real-Time Method to Estimate Speed of Object Based on Object Detection and Optical Flow Calculation

NASA Astrophysics Data System (ADS)

Liu, Kaizhan; Ye, Yunming; Li, Xutao; Li, Yan

2018-04-01

In recent years Convolutional Neural Network (CNN) has been widely used in computer vision field and makes great progress in lots of contents like object detection and classification. Even so, combining Convolutional Neural Network, which means making multiple CNN frameworks working synchronously and sharing their output information, could figure out useful message that each of them cannot provide singly. Here we introduce a method to real-time estimate speed of object by combining two CNN: YOLOv2 and FlowNet. In every frame, YOLOv2 provides object size; object location and object type while FlowNet providing the optical flow of whole image. On one hand, object size and object location help to select out the object part of optical flow image thus calculating out the average optical flow of every object. On the other hand, object type and object size help to figure out the relationship between optical flow and true speed by means of optics theory and priori knowledge. Therefore, with these two key information, speed of object can be estimated. This method manages to estimate multiple objects at real-time speed by only using a normal camera even in moving status, whose error is acceptable in most application fields like manless driving or robot vision.

Measuring the Speed of Newborn Object Recognition in Controlled Visual Worlds

ERIC Educational Resources Information Center

Wood, Justin N.; Wood, Samantha M. W.

2017-01-01

How long does it take for a newborn to recognize an object? Adults can recognize objects rapidly, but measuring object recognition speed in newborns has not previously been possible. Here we introduce an automated controlled-rearing method for measuring the speed of newborn object recognition in controlled visual worlds. We raised newborn chicks…

Real-time optical multiple object recognition and tracking system and method

NASA Technical Reports Server (NTRS)

Chao, Tien-Hsin (Inventor); Liu, Hua Kuang (Inventor)

1987-01-01

The invention relates to an apparatus and associated methods for the optical recognition and tracking of multiple objects in real time. Multiple point spatial filters are employed that pre-define the objects to be recognized at run-time. The system takes the basic technology of a Vander Lugt filter and adds a hololens. The technique replaces time, space and cost-intensive digital techniques. In place of multiple objects, the system can also recognize multiple orientations of a single object. This later capability has potential for space applications where space and weight are at a premium.

Does job satisfaction improve the health of workers? New evidence using panel data and objective measures of health.

PubMed

Fischer, Justina A V; Sousa-Poza, Alfonso

2009-01-01

This paper evaluates the relationship between job satisfaction and measures of health of workers using the German Socio-Economic Panel. Methodologically, it addresses two important design problems encountered frequently in the literature: (a) cross-sectional causality problems and (b) the absence of objective measures of physical health that complement self-reported measures of health status. Not only does using the panel structure with individual fixed effects mitigate the bias from omitting unobservable personal psycho-social characteristics, but employing more objective health measures such as health-system contacts and disability addresses such measurement problems relating to self-report assessments of health status.We find a positive link between job satisfaction (and changes over time therein) and subjective health measures (and changes therein); that is, employees with higher or improved job satisfaction levels feel healthier and are more satisfied with their health. This observation also holds true for more objective measures of health. Particularly, improvements in job satisfaction over time appear to prevent workers from (further) health deterioration. Copyright (c) 2008 John Wiley & Sons, Ltd.

Acoustic Measurement Of Periodic Motion Of Levitated Object

NASA Technical Reports Server (NTRS)

Watkins, John L.; Barmatz, Martin B.

1992-01-01

Some internal vibrations, oscillations in position, and rotations of acoustically levitated object measured by use of microphone already installed in typical levitation chamber for tuning chamber to resonance and monitoring operation. Levitating acoustic signal modulated by object motion of lower frequency. Amplitude modulation detected and analyzed spectrally to determine amplitudes and frequencies of motions.

Single-beam, dual-view digital holographic interferometry for biomechanical strain measurements of biological objects

NASA Astrophysics Data System (ADS)

Pantelić, Dejan V.; Grujić, Dušan Ž.; Vasiljević, Darko M.

2014-12-01

We describe a method for dual-view biomechanical strain measurements of highly asymmetrical biological objects, like teeth or bones. By using a spherical mirror, we were able to simultaneously record a digital hologram of the object itself and the mirror image of its (otherwise invisible) rear side. A single laser beam was sufficient to illuminate both sides of the object, and to provide a reference beam. As a result, the system was mechanically very stable, enabling long exposure times (up to 2 min) without the need for vibration isolation. The setup is simple to construct and adjust, and can be used to interferometrically observe any object that is smaller than the mirror diameter. Parallel data processing on a CUDA-enabled (compute unified device architecture) graphics card was used to reconstruct digital holograms and to further correct image distortion. We used the setup to measure the deformation of a tooth due to mastication forces. The finite-element method was used to compare experimental results and theoretical predictions.

Single-beam, dual-view digital holographic interferometry for biomechanical strain measurements of biological objects.

PubMed

Pantelić, Dejan V; Grujić, Dušan Ž; Vasiljević, Darko M

2014-12-01

We describe a method for dual-view biomechanical strain measurements of highly asymmetrical biological objects, like teeth or bones. By using a spherical mirror, we were able to simultaneously record a digital hologram of the object itself and the mirror image of its (otherwise invisible) rear side. A single laser beam was sufficient to illuminate both sides of the object, and to provide a reference beam. As a result, the system was mechanically very stable, enabling long exposure times (up to 2 min) without the need for vibration isolation. The setup is simple to construct and adjust, and can be used to interferometrically observe any object that is smaller than the mirror diameter. Parallel data processing on a CUDA-enabled (compute unified device architecture) graphics card was used to reconstruct digital holograms and to further correct image distortion. We used the setup to measure the deformation of a tooth due to mastication forces. The finite-element method was used to compare experimental results and theoretical predictions.

Three-Dimensional Shape Measurements of Specular Objects Using Phase-Measuring Deflectometry.

PubMed

Zhang, Zonghua; Wang, Yuemin; Huang, Shujun; Liu, Yue; Chang, Caixia; Gao, Feng; Jiang, Xiangqian

2017-12-07

The fast development in the fields of integrated circuits, photovoltaics, the automobile industry, advanced manufacturing, and astronomy have led to the importance and necessity of quickly and accurately obtaining three-dimensional (3D) shape data of specular surfaces for quality control and function evaluation. Owing to the advantages of a large dynamic range, non-contact operation, full-field and fast acquisition, high accuracy, and automatic data processing, phase-measuring deflectometry (PMD, also called fringe reflection profilometry) has been widely studied and applied in many fields. Phase information coded in the reflected fringe patterns relates to the local slope and height of the measured specular objects. The 3D shape is obtained by integrating the local gradient data or directly calculating the depth data from the phase information. We present a review of the relevant techniques regarding classical PMD. The improved PMD technique is then used to measure specular objects having discontinuous and/or isolated surfaces. Some influential factors on the measured results are presented. The challenges and future research directions are discussed to further advance PMD techniques. Finally, the application fields of PMD are briefly introduced.

Three-Dimensional Shape Measurements of Specular Objects Using Phase-Measuring Deflectometry

PubMed Central

Wang, Yuemin; Huang, Shujun; Liu, Yue; Chang, Caixia; Gao, Feng; Jiang, Xiangqian

2017-01-01

The fast development in the fields of integrated circuits, photovoltaics, the automobile industry, advanced manufacturing, and astronomy have led to the importance and necessity of quickly and accurately obtaining three-dimensional (3D) shape data of specular surfaces for quality control and function evaluation. Owing to the advantages of a large dynamic range, non-contact operation, full-field and fast acquisition, high accuracy, and automatic data processing, phase-measuring deflectometry (PMD, also called fringe reflection profilometry) has been widely studied and applied in many fields. Phase information coded in the reflected fringe patterns relates to the local slope and height of the measured specular objects. The 3D shape is obtained by integrating the local gradient data or directly calculating the depth data from the phase information. We present a review of the relevant techniques regarding classical PMD. The improved PMD technique is then used to measure specular objects having discontinuous and/or isolated surfaces. Some influential factors on the measured results are presented. The challenges and future research directions are discussed to further advance PMD techniques. Finally, the application fields of PMD are briefly introduced. PMID:29215600

Measurement of gravitational time dilation: An undergraduate research project

NASA Astrophysics Data System (ADS)

Burns, M. Shane; Leveille, Michael D.; Dominguez, Armand R.; Gebhard, Brian B.; Huestis, Samuel E.; Steele, Jeffrey; Patterson, Brian; Sell, Jerry F.; Serna, Mario; Gearba, M. Alina; Olesen, Robert; O'Shea, Patrick; Schiller, Jonathan

2017-10-01

General relativity predicts that clocks run more slowly near massive objects. The effect is small—a clock at sea level lags behind one 1000 m above sea level by only 9.4 ns/day. Here, we demonstrate that a measurement of this effect can be done by undergraduate students. Our paper describes an experiment conducted by undergraduate researchers at Colorado College and the United States Air Force Academy to measure gravitational time dilation. The measurement was done by comparing the signals generated by a GPS frequency standard (sea-level time) to a Cs-beam frequency standard at seven different altitudes above sea level. We found that our measurements are consistent with the predictions of general relativity.

Adiponectin, Leptin and Objectively Measured Physical Activity in Adults: A Narrative Review

PubMed Central

Nurnazahiah, Ali; Lua, Pei Lin; Shahril, Mohd Razif

2016-01-01

The objective of this study was to compile and analyse existing scientific evidences reporting the effects of objectively measured physical activity on the levels of adiponectin and leptin. Articles related to the effects of objectively measured physical activity on the levels of adiponectin and leptin were searched from the Medline and PubMed databases. The search was limited to ‘objectively measured’ physical activity, and studies that did not objectively measure the physical activity were excluded. Only English articles were included in the search and review. A total of 18 articles encompassing 2,026 respondents met the inclusion criteria. The eligible articles included all forms of evidence (e.g., cross-sectional and intervention). Seventeen and 11 studies showed the effects of objectively measured physical activity on adiponectin and leptin, respectively. Five and four cross-sectional studies showed the effects of objectively measured physical activity on adiponectin and leptin, respectively. Two out of five studies showed a weak to moderate positive association between adiponectin and objectively measured physical activity, while three out of four studies showed a weak to moderate inverse association between leptin and objectively measured physical activity. For intervention studies, six out of 12 studies involving adiponectin and five out of seven studies involving leptin showed a significant effect between the proteins and objectively measured physical activity. However, a definitive conclusion could not be drawn due to several methodological flaws in the existing articles and the acute lack of additional research in this area. In conclusion, the existing evidences are encouraging but yet not compelling. Hence, further well-designed large trials are needed before the effectiveness of objectively measured physical activity in elevating adiponectin levels and in decreasing leptin levels could be strongly confirmed. PMID:28090175

Monitoring the athlete training response: subjective self-reported measures trump commonly used objective measures: a systematic review

PubMed Central

Saw, Anna E; Main, Luana C; Gastin, Paul B

2016-01-01

Background Monitoring athlete well-being is essential to guide training and to detect any progression towards negative health outcomes and associated poor performance. Objective (performance, physiological, biochemical) and subjective measures are all options for athlete monitoring. Objective We systematically reviewed objective and subjective measures of athlete well-being. Objective measures, including those taken at rest (eg, blood markers, heart rate) and during exercise (eg, oxygen consumption, heart rate response), were compared against subjective measures (eg, mood, perceived stress). All measures were also evaluated for their response to acute and chronic training load. Methods The databases Academic search complete, MEDLINE, PsycINFO, SPORTDiscus and PubMed were searched in May 2014. Fifty-six original studies reported concurrent subjective and objective measures of athlete well-being. The quality and strength of findings of each study were evaluated to determine overall levels of evidence. Results Subjective and objective measures of athlete well-being generally did not correlate. Subjective measures reflected acute and chronic training loads with superior sensitivity and consistency than objective measures. Subjective well-being was typically impaired with an acute increase in training load, and also with chronic training, while an acute decrease in training load improved subjective well-being. Summary This review provides further support for practitioners to use subjective measures to monitor changes in athlete well-being in response to training. Subjective measures may stand alone, or be incorporated into a mixed methods approach to athlete monitoring, as is current practice in many sport settings. PMID:26423706

Comparison of objective and subjective assessments of sleep time in subjects with bipolar disorder.

PubMed

Gonzalez, R; Tamminga, C; Tohen, M; Suppes, T

2013-07-01

Sleep disturbance is a core feature of bipolar disorder. To date there are a limited number of studies that compare subjective and objective measures of sleep in populations of subjects with mood disorders. This study evaluated the relationship between subjective and objective measurements of total sleep time (TST) in a bipolar type I disorder (BD I) population. Thirty-nine subjects diagnosed with BD I participated in the study. Mood symptoms were assessed via YMRS and IDS-30-C. Subjects wore an actigraph device and maintained a sleep diary for seven consecutive days. Differences between TST as estimated via sleep diaries and actigraphy were calculated. Objective and subjective measures of TST were significantly correlated (r=0.5151, p=0.0008). Secondary analysis revealed that the severity of depressive symptoms did correlate to this discrepancy (t=2.65, p=0.01). The impact that medications have on the accuracy of TST reported was not investigated. Also, sleep diaries may have acted to prompt subjects to pay closer attention to their sleep habits and therefore more accurately report TST than in the average clinical setting. The results of the current study demonstrate a significant correlation between the estimation of TST as measured objectively via actigraphy and subjectively via sleep diaries in BD patients. Mood symptomotology might impact the accuracy of TST reported. Further study is warranted. Copyright © 2013 Elsevier B.V. All rights reserved.

Executive function in fibromyalgia: Comparing subjective and objective measures.

PubMed

Gelonch, Olga; Garolera, Maite; Valls, Joan; Rosselló, Lluís; Pifarré, Josep

2016-04-01

There is evidence to suggest the existence of an executive dysfunction in people diagnosed with fibromyalgia, although there are certain inconsistencies between studies. Here, we aim to compare executive performance between patients with fibromyalgia and a control group by using subjective and objective cognitive tests, analyzing the influence of patient mood on the results obtained, and studying associations between the two measures. 82 patients diagnosed with fibromyalgia and 42 healthy controls, matched by age and years of education, were assessed using the Behavioral Rating Inventory of Executive Function - Adult Version (BRIEF-A) as a subjective measure of executive functioning. A selection of objective cognitive tests were also used to measure a series of executive functions and to identify symptoms of depression and anxiety. Patients with fibromyalgia perceived greater difficulties than the control group on all of the BRIEF-A scales. However, after adjustments were made for depression and anxiety the only differences that remained were those associated with the working memory scale and the Metacognition and Global Executive Composite index. In the case of the objective cognitive tests, a significantly worse overall performance was evidenced for the fibromyalgia patients. However, this also disappeared when adjustments were made for depression and anxiety. After this adjustment, fibromyalgia patients only performed significantly worse for the interference effect in the Stroop Test. Although there were no significant associations between most of the objective cognitive tests and the BRIEF-A scales, depression and anxiety exhibited strong associations with almost all of the BRIEF-A scales and with several of the objective cognitive tests. Patients with fibromyalgia showed executive dysfunction in subjective and objective measures, although most of this impairment was associated with mood disturbances. Exceptions to this general rule were observed in the

Holographic cinematography of time-varying reflecting and time-varying phase objects using a Nd:YAG laser.

PubMed

Decker, A J

1982-03-01

The use of a Nd:YAG laser to record holographic motion pictures of time-varying reflecting objects and time-varying phase objects is discussed. Sample frames from both types of holographic motion pictures are presented. The holographic system discussed is intended for three-dimensional flow visualization of the time-varying flows that occur in jet-engine components.

Holographic cinematography of time-varying reflecting and time-varying phase objects using a Nd:YAG laser

NASA Technical Reports Server (NTRS)

Decker, A. J.

1982-01-01

The use of a Nd:YAG laser to record holographic motion pictures of time-varying reflecting objects and time-varying phase objects is discussed. Sample frames from both types of holographic motion pictures are presented. The holographic system discussed is intended for three-dimensional flow visualization of the time-varying flows that occur in jet-engine components.

Quantitative method for measuring heat flux emitted from a cryogenic object

DOEpatents

Duncan, Robert V.

1993-01-01

The present invention is a quantitative method for measuring the total heat flux, and of deriving the total power dissipation, of a heat-fluxing object which includes the steps of placing an electrical noise-emitting heat-fluxing object in a liquid helium bath and measuring the superfluid transition temperature of the bath. The temperature of the liquid helium bath is thereafter reduced until some measurable parameter, such as the electrical noise, exhibited by the heat-fluxing object or a temperature-dependent resistive thin film in intimate contact with the heat-fluxing object, becomes greatly reduced. The temperature of the liquid helum bath is measured at this point. The difference between the superfluid transition temperature of the liquid helium bath surrounding the heat-fluxing object, and the temperature of the liquid helium bath when the electrical noise emitted by the heat-fluxing object becomes greatly reduced, is determined. The total heat flux from the heat-fluxing object is determined as a function of this difference between these temperatures. In certain applications, the technique can be used to optimize thermal design parameters of cryogenic electronics, for example, Josephson junction and infra-red sensing devices.

Quantitative method for measuring heat flux emitted from a cryogenic object

DOEpatents

Duncan, R.V.

1993-03-16

The present invention is a quantitative method for measuring the total heat flux, and of deriving the total power dissipation, of a heat-fluxing object which includes the steps of placing an electrical noise-emitting heat-fluxing object in a liquid helium bath and measuring the superfluid transition temperature of the bath. The temperature of the liquid helium bath is thereafter reduced until some measurable parameter, such as the electrical noise, exhibited by the heat-fluxing object or a temperature-dependent resistive thin film in intimate contact with the heat-fluxing object, becomes greatly reduced. The temperature of the liquid helum bath is measured at this point. The difference between the superfluid transition temperature of the liquid helium bath surrounding the heat-fluxing object, and the temperature of the liquid helium bath when the electrical noise emitted by the heat-fluxing object becomes greatly reduced, is determined. The total heat flux from the heat-fluxing object is determined as a function of this difference between these temperatures. In certain applications, the technique can be used to optimize thermal design parameters of cryogenic electronics, for example, Josephson junction and infrared sensing devices.

Relative hardness measurement of soft objects by a new fiber optic sensor

NASA Astrophysics Data System (ADS)

Ahmadi, Roozbeh; Ashtaputre, Pranav; Abou Ziki, Jana; Dargahi, Javad; Packirisamy, Muthukumaran

2010-06-01

The measurement of relative hardness of soft objects enables replication of human finger tactile perception capabilities. This ability has many applications not only in automation and robotics industry but also in many other areas such as aerospace and robotic surgery where a robotic tool interacts with a soft contact object. One of the practical examples of interaction between a solid robotic instrument and a soft contact object occurs during robotically-assisted minimally invasive surgery. Measuring the relative hardness of bio-tissue, while contacting the robotic instrument, helps the surgeons to perform this type of surgery more reliably. In the present work, a new optical sensor is proposed to measure the relative hardness of contact objects. In order to measure the hardness of a contact object, like a human finger, it is required to apply a small force/deformation to the object by a tactile sensor. Then, the applied force and resulting deformation should be recorded at certain points to enable the relative hardness measurement. In this work, force/deformation data for a contact object is recorded at certain points by the proposed optical sensor. Recorded data is used to measure the relative hardness of soft objects. Based on the proposed design, an experimental setup was developed and experimental tests were performed to measure the relative hardness of elastomeric materials. Experimental results verify the ability of the proposed optical sensor to measure the relative hardness of elastomeric samples.

Object detection and imaging with acoustic time reversal mirrors

NASA Astrophysics Data System (ADS)

Fink, Mathias

1993-11-01

Focusing an acoustic wave on an object of unknown shape through an inhomogeneous medium of any geometrical shape is a challenge in underground detection. Optimal detection and imaging of objects needs the development of such focusing techniques. The use of a time reversal mirror (TRM) represents an original solution to this problem. It realizes in real time a focusing process matched to the object shape, to the geometries of the acoustic interfaces and to the geometries of the mirror. It is a self adaptative technique which compensates for any geometrical distortions of the mirror structure as well as for diffraction and refraction effects through the interfaces. Two real time 64 and 128 channel prototypes have been built in our laboratory and TRM experiments demonstrating the TRM performance through inhomogeneous solid and liquid media are presented. Applications to medical therapy (kidney stone detection and destruction) and to nondestructive testing of metallurgical samples of different geometries are described. Extension of this study to underground detection and imaging will be discussed.

34 CFR 200.18 - Annual measurable objectives.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Annual measurable objectives. 200.18 Section 200.18 Education Regulations of the Offices of the Department of Education OFFICE OF ELEMENTARY AND SECONDARY EDUCATION, DEPARTMENT OF EDUCATION TITLE I-IMPROVING THE ACADEMIC ACHIEVEMENT OF THE DISADVANTAGED Improving...

Association of Environmental Indicators with Teen Alcohol Use and Problem Behavior: Teens’ Observations vs. Objectively-Measured Indicators

PubMed Central

Byrnes, Hilary F.; Miller, Brenda A.; Morrison, Christopher N.; Wiebe, Douglas J.; Woychik, Marcie; Wiehe, Sarah E.

2017-01-01

Most prior studies use objectively measured data (e.g., census-based indicators) to assess contextual risks. However, teens’ observations might be more important for their risk behavior. Objectives: 1) determine relationships between observed and objective indicators of contextual risks 2) determine relations of observed and objective indicators with teen alcohol use and problem behavior. Teens aged 14–16 (N=170) carried GPS-enabled smartphones for one month, with locations documented. Ecological momentary assessment (EMA) measured teens’ observations via texts regarding risk behaviors and environmental observations. Objective indicators of alcohol outlets and disorganization were spatially joined to EMAs based on teens’ location at the time of the texts. Observed and objective disorganization, and objective indicators of alcohol outlets were related to alcohol use. Observed disorganization was related to problem behavior, while objective indicators were unrelated. Findings suggest the importance of considering teens’ observations of contextual risk for understanding influences on risk behavior and suggest future directions for research and prevention strategies. PMID:28061392

Predictive coding of visual object position ahead of moving objects revealed by time-resolved EEG decoding.

PubMed

Hogendoorn, Hinze; Burkitt, Anthony N

2018-05-01

Due to the delays inherent in neuronal transmission, our awareness of sensory events necessarily lags behind the occurrence of those events in the world. If the visual system did not compensate for these delays, we would consistently mislocalize moving objects behind their actual position. Anticipatory mechanisms that might compensate for these delays have been reported in animals, and such mechanisms have also been hypothesized to underlie perceptual effects in humans such as the Flash-Lag Effect. However, to date no direct physiological evidence for anticipatory mechanisms has been found in humans. Here, we apply multivariate pattern classification to time-resolved EEG data to investigate anticipatory coding of object position in humans. By comparing the time-course of neural position representation for objects in both random and predictable apparent motion, we isolated anticipatory mechanisms that could compensate for neural delays when motion trajectories were predictable. As well as revealing an early neural position representation (lag 80-90 ms) that was unaffected by the predictability of the object's trajectory, we demonstrate a second neural position representation at 140-150 ms that was distinct from the first, and that was pre-activated ahead of the moving object when it moved on a predictable trajectory. The latency advantage for predictable motion was approximately 16 ± 2 ms. To our knowledge, this provides the first direct experimental neurophysiological evidence of anticipatory coding in human vision, revealing the time-course of predictive mechanisms without using a spatial proxy for time. The results are numerically consistent with earlier animal work, and suggest that current models of spatial predictive coding in visual cortex can be effectively extended into the temporal domain. Copyright © 2018 Elsevier Inc. All rights reserved.

Finding the Density of Objects without Measuring Mass and Volume

ERIC Educational Resources Information Center

Mumba, Frackson; Tsige, Mesfin

2007-01-01

A simple method based on the moment of forces and Archimedes' principle is described for finding density without measuring the mass and volume of an object. The method involves balancing two unknown objects of masses M[subscript 1] and M[subscript 2] on each side of a pivot on a metre rule and measuring their corresponding moment arms. The object…

International study of objectively measured physical activity and sedentary time with body mass index and obesity: IPEN adult study.

PubMed

Van Dyck, D; Cerin, E; De Bourdeaudhuij, I; Hinckson, E; Reis, R S; Davey, R; Sarmiento, O L; Mitas, J; Troelsen, J; MacFarlane, D; Salvo, D; Aguinaga-Ontoso, I; Owen, N; Cain, K L; Sallis, J F

2015-02-01

Physical activity (PA) has been consistently implicated in the etiology of obesity, whereas recent evidence on the importance of sedentary time remains inconsistent. Understanding of dose-response associations of PA and sedentary time with overweight and obesity in adults can be improved with large-scale studies using objective measures of PA and sedentary time. The purpose of this study was to examine the strength, direction and shape of dose-response associations of accelerometer-based PA and sedentary time with body mass index (BMI) and weight status in 10 countries, and the moderating effects of study site and gender. Data from the International Physical activity and the Environment Network (IPEN) Adult study were used. IPEN Adult is an observational multi-country cross-sectional study, and 12 sites in 10 countries are included. Participants wore an accelerometer for seven consecutive days, completed a socio-demographic questionnaire and reported height and weight. In total, 5712 adults (18-65 years) were included in the analyses. Generalized additive mixed models, conducted in R, were used to estimate the strength and shape of the associations. A curvilinear relationship of accelerometer-based moderate-to-vigorous PA and total counts per minute with BMI and the probability of being overweight/obese was identified. The associations were negative, but weakened at higher levels of moderate-to-vigorous PA (>50 min per day) and higher counts per minute. No associations between sedentary time and weight outcomes were found. Complex site- and gender-specific findings were revealed for BMI, but not for weight status. On the basis of these results, the current Institute of Medicine recommendation of 60 min per day of moderate-to-vigorous PA to prevent weight gain in normal-weight adults was supported. No relationship between sedentary time and the weight outcomes was present, calling for further examination. If moderator findings are confirmed, the relationship

International Study of Objectively-measured Physical Activity and Sedentary Time with Body Mass Index and Obesity: IPEN Adult Study

PubMed Central

Van Dyck, Delfien; Cerin, Ester; De Bourdeaudhuij, Ilse; Hinckson, Erica; Reis, Rodrigo S; Davey, Rachel; Sarmiento, Olga Lucia; Mitas, Josef; Troelsen, Jens; MacFarlane, Duncan; Salvo, Deborah; Aguinaga-Ontoso, Ines; Owen, Neville; Cain, Kelli L; Sallis, James F

2014-01-01

Background Physical activity (PA) has been consistently implicated in the etiology of obesity, while recent evidence on the importance of sedentary time remains inconsistent. Understanding of dose-response associations of PA and sedentary time with overweight and obesity in adults can be improved with large-scale studies using objective measures of PA and sedentary time. The purpose of this study was to examine the strength, direction and shape of dose-response associations of accelerometer-based PA and sedentary time with BMI and weight status in 10 countries, and the moderating effects of study site and gender. Methods Data from the International Physical activity and the Environment Network (IPEN) Adult study were used. IPEN Adult is an observational multi-country cross-sectional study, and 12 sites in 10 countries are included. Participants wore an accelerometer for seven consecutive days, completed a socio-demographic questionnaire and reported height and weight. In total, 5712 adults (18–65 years) were included in the analyses. Generalized additive mixed models, conducted in R, were used to estimate the strength and shape of the associations. Results A curvilinear relationship of accelerometer-based moderate-to-vigorous PA and total counts/minute with BMI and the probability of being overweight/obese was identified. The associations were negative, but weakened at higher levels of moderate-to-vigorous PA (>50 min/day) and higher counts/minute. No associations between sedentary time and weight outcomes were found. Complex site- and gender-specific findings were revealed for BMI, but not for weight status. Conclusions Based on these results, the current Institute of Medicine recommendation of 60 minutes/day of moderate-to-vigorous PA to prevent weight gain in normal-weight adults was supported. No relationship between sedentary time and the weight outcomes was present, calling for further examination. If moderator findings are confirmed, the relationship

Objective Measurement of Emerging Affective Traits in Preschool Children.

ERIC Educational Resources Information Center

Adkins, Dorothy C.

An objective measure of motivation to achieve for preschool children called Gumpgookies is described. It is an objective-projective technique that requires choice between two alternate types of behavior portrayed in pictures and accompanying verbal descriptions. Gumpgookies are amoeba-like creatures who behave in ways intended to show differences…

Methodology for object-oriented real-time systems analysis and design: Software engineering

NASA Technical Reports Server (NTRS)

Schoeffler, James D.

1991-01-01

Successful application of software engineering methodologies requires an integrated analysis and design life-cycle in which the various phases flow smoothly 'seamlessly' from analysis through design to implementation. Furthermore, different analysis methodologies often lead to different structuring of the system so that the transition from analysis to design may be awkward depending on the design methodology to be used. This is especially important when object-oriented programming is to be used for implementation when the original specification and perhaps high-level design is non-object oriented. Two approaches to real-time systems analysis which can lead to an object-oriented design are contrasted: (1) modeling the system using structured analysis with real-time extensions which emphasizes data and control flows followed by the abstraction of objects where the operations or methods of the objects correspond to processes in the data flow diagrams and then design in terms of these objects; and (2) modeling the system from the beginning as a set of naturally occurring concurrent entities (objects) each having its own time-behavior defined by a set of states and state-transition rules and seamlessly transforming the analysis models into high-level design models. A new concept of a 'real-time systems-analysis object' is introduced and becomes the basic building block of a series of seamlessly-connected models which progress from the object-oriented real-time systems analysis and design system analysis logical models through the physical architectural models and the high-level design stages. The methodology is appropriate to the overall specification including hardware and software modules. In software modules, the systems analysis objects are transformed into software objects.

Grayscale imbalance correction in real-time phase measuring profilometry

NASA Astrophysics Data System (ADS)

Zhu, Lin; Cao, Yiping; He, Dawu; Chen, Cheng

2016-10-01

Grayscale imbalance correction in real-time phase measuring profilometry (RPMP) is proposed. In the RPMP, the sufficient information is obtained to reconstruct the 3D shape of the measured object in one over twenty-four of a second. Only one color fringe pattern whose R, G and B channels are coded as three sinusoidal phase-shifting gratings with an equivalent shifting phase of 2π/3 is sent to a flash memory on a specialized digital light projector (SDLP). And then the SDLP projects the fringe patterns in R, G and B channels sequentially onto the measured object in one over seventy-two of a second and meanwhile a monochrome CCD camera captures the corresponding deformed patterns synchronously with the SDLP. Because the deformed patterns from three color channels are captured at different time, the color crosstalk is avoided completely. But due to the monochrome CCD camera's different spectral sensitivity to R, G and B tricolor, there will be grayscale imbalance among these deformed patterns captured at R, G and B channels respectively which may result in increasing measuring errors or even failing to reconstruct the 3D shape. So a new grayscale imbalance correction method based on least square method is developed. The experimental results verify the feasibility of the proposed method.

Generally objective measurement of human temperature and reading ability: some corollaries.

PubMed

Stenner, A Jackson; Stone, Mark

2010-01-01

We argue that a goal of measurement is general objectivity: point estimates of a person's measure (height, temperature, and reader ability) should be independent of the instrument and independent of the sample in which the person happens to find herself. In contrast, Rasch's concept of specific objectivity requires only differences (i.e., comparisons) between person measures to be independent of the instrument. We present a canonical case in which there is no overlap between instruments and persons: each person is measured by a unique instrument. We then show what is required to estimate measures in this degenerate case. The canonical case encourages a simplification and reconceptualization of validity and reliability. Not surprisingly, this reconceptualization looks a lot like the way physicists and chemometricians think about validity and measurement error. We animate this presentation with a technology that blurs the distinction between instruction, assessment, and generally objective measurement of reader ability. We encourage adaptation of this model to health outcomes measurement.

Effects of Wind Turbine Noise on Self-Reported and Objective Measures of Sleep

PubMed Central

Michaud, David S.; Feder, Katya; Keith, Stephen E.; Voicescu, Sonia A.; Marro, Leonora; Than, John; Guay, Mireille; Denning, Allison; Murray, Brian J.; Weiss, Shelly K.; Villeneuve, Paul J.; van den Berg, Frits; Bower, Tara

2016-01-01

Study Objectives: To investigate the association between self-reported and objective measures of sleep and wind turbine noise (WTN) exposure. Methods: The Community Noise and Health Study, a cross-sectional epidemiological study, included an in-house computer-assisted interview and sleep pattern monitoring over a 7 d period. Outdoor WTN levels were calculated following international standards for conditions that typically approximate the highest long-term average levels at each dwelling. Study data were collected between May and September 2013 from adults, aged 18–79 y (606 males, 632 females) randomly selected from each household and living between 0.25 and 11.22 kilometers from operational wind turbines in two Canadian provinces. Self-reported sleep quality over the past 30 d was assessed using the Pittsburgh Sleep Quality Index. Additional questions assessed the prevalence of diagnosed sleep disorders and the magnitude of sleep disturbance over the previous year. Objective measures for sleep latency, sleep efficiency, total sleep time, rate of awakening bouts, and wake duration after sleep onset were recorded using the wrist worn Actiwatch2® from a subsample of 654 participants (289 males, 365 females) for a total of 3,772 sleep nights. Results: Participant response rate for the interview was 78.9%. Outdoor WTN levels reached 46 dB(A) with an arithmetic mean of 35.6 and a standard deviation of 7.4. Self-reported and objectively measured sleep outcomes consistently revealed no apparent pattern or statistically significant relationship to WTN levels. However, sleep was significantly influenced by other factors, including, but not limited to, the use of sleep medication, other health conditions (including sleep disorders), caffeine consumption, and annoyance with blinking lights on wind turbines. Conclusions: Study results do not support an association between exposure to outdoor WTN up to 46 dB(A) and an increase in the prevalence of disturbed sleep

Association of environmental indicators with teen alcohol use and problem behavior: Teens' observations vs. objectively-measured indicators.

PubMed

Byrnes, Hilary F; Miller, Brenda A; Morrison, Christopher N; Wiebe, Douglas J; Woychik, Marcie; Wiehe, Sarah E

2017-01-01

Most prior studies use objectively measured data (e.g., census-based indicators) to assess contextual risks. However, teens' observations might be more important for their risk behavior. 1) determine relationships between observed and objective indicators of contextual risks 2) determine relations of observed and objective indicators with teen alcohol use and problem behavior. Teens aged 14-16 (N=170) carried GPS-enabled smartphones for one month, with locations documented. Ecological momentary assessment (EMA) measured teens' observations via texts regarding risk behaviors and environmental observations. Objective indicators of alcohol outlets and disorganization were spatially joined to EMAs based on teens' location at the time of the texts. Observed and objective disorganization, and objective indicators of alcohol outlets were related to alcohol use. Observed disorganization was related to problem behavior, while objective indicators were unrelated. Findings suggest the importance of considering teens' observations of contextual risk for understanding influences on risk behavior and suggest future directions for research and prevention strategies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Personal Career Orientation. Performance Objectives. Criterion Measures. Home Economics.

ERIC Educational Resources Information Center

Allen, Alveta; And Others

Several intermediate performance objectives and corresponding criterion measures are listed for each of six terminal objectives for a personal career orientation course for seventh grade students. This 6- to 9-week course is designed to acquaint the student with personal qualities and characteristics necessary for success in the world of work.…

Assessing ADHD symptoms in children and adults: evaluating the role of objective measures.

PubMed

Emser, Theresa S; Johnston, Blair A; Steele, J Douglas; Kooij, Sandra; Thorell, Lisa; Christiansen, Hanna

2018-05-18

Diagnostic guidelines recommend using a variety of methods to assess and diagnose ADHD. Applying subjective measures always incorporates risks such as informant biases or large differences between ratings obtained from diverse sources. Furthermore, it has been demonstrated that ratings and tests seem to assess somewhat different constructs. The use of objective measures might thus yield valuable information for diagnosing ADHD. This study aims at evaluating the role of objective measures when trying to distinguish between individuals with ADHD and controls. Our sample consisted of children (n = 60) and adults (n = 76) diagnosed with ADHD and matched controls who completed self- and observer ratings as well as objective tasks. Diagnosis was primarily based on clinical interviews. A popular pattern recognition approach, support vector machines, was used to predict the diagnosis. We observed relatively high accuracy of 79% (adults) and 78% (children) applying solely objective measures. Predicting an ADHD diagnosis using both subjective and objective measures exceeded the accuracy of objective measures for both adults (89.5%) and children (86.7%), with the subjective variables proving to be the most relevant. We argue that objective measures are more robust against rater bias and errors inherent in subjective measures and may be more replicable. Considering the high accuracy of objective measures only, we found in our study, we think that they should be incorporated in diagnostic procedures for assessing ADHD.

Online phase measuring profilometry for rectilinear moving object by image correction

NASA Astrophysics Data System (ADS)

Yuan, Han; Cao, Yi-Ping; Chen, Chen; Wang, Ya-Pin

2015-11-01

In phase measuring profilometry (PMP), the object must be static for point-to-point reconstruction with the captured deformed patterns. While the object is rectilinearly moving online, the size and pixel position differences of the object in different captured deformed patterns do not meet the point-to-point requirement. We propose an online PMP based on image correction to measure the three-dimensional shape of the rectilinear moving object. In the proposed method, the deformed patterns captured by a charge-coupled diode camera are reprojected from the oblique view to an aerial view first and then translated based on the feature points of the object. This method makes the object appear stationary in the deformed patterns. Experimental results show the feasibility and efficiency of the proposed method.

Measuring Positions of Objects using Two or More Cameras

NASA Technical Reports Server (NTRS)

Klinko, Steve; Lane, John; Nelson, Christopher

2008-01-01

An improved method of computing positions of objects from digitized images acquired by two or more cameras (see figure) has been developed for use in tracking debris shed by a spacecraft during and shortly after launch. The method is also readily adaptable to such applications as (1) tracking moving and possibly interacting objects in other settings in order to determine causes of accidents and (2) measuring positions of stationary objects, as in surveying. Images acquired by cameras fixed to the ground and/or cameras mounted on tracking telescopes can be used in this method. In this method, processing of image data starts with creation of detailed computer- aided design (CAD) models of the objects to be tracked. By rotating, translating, resizing, and overlaying the models with digitized camera images, parameters that characterize the position and orientation of the camera can be determined. The final position error depends on how well the centroids of the objects in the images are measured; how accurately the centroids are interpolated for synchronization of cameras; and how effectively matches are made to determine rotation, scaling, and translation parameters. The method involves use of the perspective camera model (also denoted the point camera model), which is one of several mathematical models developed over the years to represent the relationships between external coordinates of objects and the coordinates of the objects as they appear on the image plane in a camera. The method also involves extensive use of the affine camera model, in which the distance from the camera to an object (or to a small feature on an object) is assumed to be much greater than the size of the object (or feature), resulting in a truly two-dimensional image. The affine camera model does not require advance knowledge of the positions and orientations of the cameras. This is because ultimately, positions and orientations of the cameras and of all objects are computed in a coordinate

Different Measures of Structural Similarity Tap Different Aspects of Visual Object Processing

PubMed Central

Gerlach, Christian

2017-01-01

The structural similarity of objects has been an important variable in explaining why some objects are easier to categorize at a superordinate level than to individuate, and also why some patients with brain injury have more difficulties in recognizing natural (structurally similar) objects than artifacts (structurally distinct objects). In spite of its merits as an explanatory variable, structural similarity is not a unitary construct, and it has been operationalized in different ways. Furthermore, even though measures of structural similarity have been successful in explaining task and category-effects, this has been based more on implication than on direct empirical demonstrations. Here, the direct influence of two different measures of structural similarity, contour overlap and within-item structural diversity, on object individuation (object decision) and superordinate categorization performance is examined. Both measures can account for performance differences across objects, but in different conditions. It is argued that this reflects differences between the measures in whether they tap: (i) global or local shape characteristics, and (ii) between- or within-category structural similarity. PMID:28861027

Time-dependent inhomogeneous jet models for BL Lac objects

NASA Technical Reports Server (NTRS)

Marlowe, A. T.; Urry, C. M.; George, I. M.

1992-01-01

Relativistic beaming can explain many of the observed properties of BL Lac objects (e.g., rapid variability, high polarization, etc.). In particular, the broadband radio through X-ray spectra are well modeled by synchrotron-self Compton emission from an inhomogeneous relativistic jet. We have done a uniform analysis on several BL Lac objects using a simple but plausible inhomogeneous jet model. For all objects, we found that the assumed power-law distribution of the magnetic field and the electron density can be adjusted to match the observed BL Lac spectrum. While such models are typically unconstrained, consideration of spectral variability strongly restricts the allowed parameters, although to date the sampling has generally been too sparse to constrain the current models effectively. We investigate the time evolution of the inhomogeneous jet model for a simple perturbation propagating along the jet. The implications of this time evolution model and its relevance to observed data are discussed.

Time-dependent inhomogeneous jet models for BL Lac objects

NASA Astrophysics Data System (ADS)

Marlowe, A. T.; Urry, C. M.; George, I. M.

1992-05-01

Relativistic beaming can explain many of the observed properties of BL Lac objects (e.g., rapid variability, high polarization, etc.). In particular, the broadband radio through X-ray spectra are well modeled by synchrotron-self Compton emission from an inhomogeneous relativistic jet. We have done a uniform analysis on several BL Lac objects using a simple but plausible inhomogeneous jet model. For all objects, we found that the assumed power-law distribution of the magnetic field and the electron density can be adjusted to match the observed BL Lac spectrum. While such models are typically unconstrained, consideration of spectral variability strongly restricts the allowed parameters, although to date the sampling has generally been too sparse to constrain the current models effectively. We investigate the time evolution of the inhomogeneous jet model for a simple perturbation propagating along the jet. The implications of this time evolution model and its relevance to observed data are discussed.

Measurements of electron avalanche formation time in W-band microwave air breakdown

NASA Astrophysics Data System (ADS)

Cook, Alan M.; Hummelt, Jason S.; Shapiro, Michael A.; Temkin, Richard J.

2011-08-01

We present measurements of formation times of electron avalanche ionization discharges induced by a focused 110 GHz millimeter-wave beam in atmospheric air. Discharges take place in a free volume of gas, with no nearby surfaces or objects. When the incident field amplitude is near the breakdown threshold for pulsed conditions, measured formation times are ˜0.1-2 μs over the pressure range 5-700 Torr. Combined with electric field breakdown threshold measurements, the formation time data shows the agreement of 110 GHz air breakdown with the similarity laws of gas discharges.

Objective Measures of Visual Function in Papilledema

PubMed Central

Moss, Heather E.

2016-01-01

Synopsis Visual function is an important parameter to consider when managing patients with papilledema. Though the current standard of care uses standard automated perimetry (SAP) to obtain this information, this test is inherently subjective and prone to patient errors. Objective visual function tests including the visual evoked potential, pattern electroretinogram, photopic negative response of the full field electroretinogram, and pupillary light response have the potential to replace or supplement subjective visual function tests in papilledema management. This article reviews the evidence for use of objective visual function tests to assess visual function in papilledema and discusses future investigations needed to develop them as clinically practical and useful measures for this purpose. PMID:28451649

Background oriented schlieren measurement of the refractive index field of air induced by a hot, cylindrical measurement object.

PubMed

Beermann, Rüdiger; Quentin, Lorenz; Pösch, Andreas; Reithmeier, Eduard; Kästner, Markus

2017-05-10

To optically capture the topography of a hot measurement object with high precision, the light deflection by the inhomogeneous refractive index field-induced by the heat transfer from the measurement object to the ambient medium-has to be considered. We used the 2D background oriented schlieren method with illuminated wavelet background, an optical flow algorithm, and Ciddor's equation to quantify the refractive index field located directly above a red-glowing, hot measurement object. A heat transfer simulation has been implemented to verify the magnitude and the shape of the measured refractive index field. Provided that no forced external flow is disturbing the shape of the convective flow originating from the hot object, a laminar flow can be observed directly above the object, resulting in a sharply bounded, inhomogeneous refractive index field.

Objective-subjective disparity in cancer-related cognitive impairment: does the use of change measures help reconcile the difference?

PubMed

O'Farrell, Erin; Smith, Andra; Collins, Barbara

2017-10-01

Studies to date have found little correlation between subjective and objective measures of cognitive function in cancer patients, making it difficult to interpret the significance of their cognitive complaints. The purpose of this study was to determine if a stronger correlation would be obtained using measures of cognitive change rather than static scores. Sixty women with early stage breast cancer underwent repeated cognitive assessment over the course of chemotherapy with a neuropsychological test battery (objective measure) and with the FACT-Cog (subjective measure). Their results were compared to 60 healthy women matched on age and education and assessed at similar intervals. We used multilevel modeling, with FACT-Cog as the dependent measure and ordinary least squares slopes of a neuropsychological summary score as the independent variable, to evaluate the co-variation between the subjective and objective measures over time RESULTS: Measures of both objective and subjective cognitive function declined over the course of chemotherapy in the breast cancer patients but there was no significant relationship between them, even when using change measures. Change in objective cognitive function was not related to change in anxiety or fatigue scores but the decline in perceived cognitive function was associated with greater anxiety and fatigue. The discrepancy in objective and subjective measures of cognition in breast cancer patients cannot be accounted for in terms of a failure to use change measures. Although the results are negative, we contend that this is the more appropriate methodology for analyzing cancer-related changes in cognition. Copyright © 2016 John Wiley & Sons, Ltd.

Objective Versus Subjective Measures of Executive Functions: Predictors of Participation and Quality of Life in Parkinson Disease?

PubMed

Vlagsma, Thialda T; Koerts, Janneke; Tucha, Oliver; Dijkstra, Hilde T; Duits, Annelien A; van Laar, Teus; Spikman, Jacoba M

2017-11-01

To determine whether objective (neuropsychological tests) and subjective measures (questionnaires) of executive functions (EFs) are associated in patients with Parkinson disease (PD), and to determine to what extent level of participation and quality of life (QoL) of patients with PD can be predicted by these measures of EFs. Correlational research design (case-control and prediction design). Departments of neuropsychology of 3 medical centers. A sample (N=136) of patients with PD (n=42) and their relatives, and controls without PD (n=94). Not applicable. A test battery measuring EFs. In addition, patients, their relatives, and controls completed the Dysexecutive Questionnaire, Brock Adaptive Functioning Questionnaire, and Barkley Deficits in Executive Functioning Scale - time management questionnaires measuring complaints about EFs. Participation and QoL were measured with the Impact on Participation and Autonomy scale and the Parkinson's Disease Questionnaire-39, respectively. Patients with PD showed impairments in EFs on objective tests and reported significantly more complaints about EFs than did controls without PD. No associations were found between patients' performances on objective and subjective measures of EFs. However, both objective and subjective measures predicted patients' level of participation. In addition, subjective measures of EFs predicted QoL in patients with PD. These findings show that objective and subjective measures of EFs are not interchangeable and that both approaches predict level of participation and QoL in patients with PD. However, within this context, sex needs to be taken into account. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Maximum human objectively measured pharmacologically stimulated accommodative amplitude.

PubMed

Grzybowski, Andrzej; Schachar, Ronald A; Gaca-Wysocka, Magdalena; Schachar, Ira H; Pierscionek, Barbara K

2018-01-01

To measure the maximum, objectively measured, accommodative amplitude, produced by pharmacologic stimulation. Thirty-seven healthy subjects were enrolled, with a mean age of 20.2±1.1 years, corrected visual acuity of 20/20, and mean spherical equivalent refraction (SER) =-0.83±1.60 diopters. For each subject, the right pupil was dilated with phenylephrine 10%. After 30 minutes, the pupil was measured, the left eye was patched, and the right eye was autorefracted. Pilocarpine 4% was then instilled in the right eye, followed by phenylephrine. At 45 minutes after the pilocarpine, autorefraction and pupil size were again measured. Mean pupil size pre- and postpilocarpine was 8.0±0.8 mm and 4.4±1.9 mm, respectively. Pre- and postpilocarpine, the mean SER was -0.83±1.60 and -10.55±4.26 diopters, respectively. The mean pilocarpine-induced accommodative amplitude was 9.73±3.64 diopters. Five subjects had accommodative amplitudes ≥14.00 diopters. Accommodative amplitude was not significantly related to baseline SER ( p -value =0.24), pre- or postpilocarpine pupil size ( p -values =0.13 and 0.74), or change in pupil size ( p -value =0.37). Iris color did not statistically significantly affect accommodative amplitude ( p -value =0.83). Following topically applied pilocarpine, the induced objectively measured accommodation in the young eye is greater than or equal to the reported subjectively measured voluntary maximum accommodative amplitude.

Subjectively and objectively measured sleep with and without posttraumatic stress disorder and trauma exposure.

PubMed

Kobayashi, Ihori; Huntley, Edward; Lavela, Joseph; Mellman, Thomas A

2012-07-01

Although reports of sleep disturbances are common among individuals with posttraumatic stress disorder (PTSD), results of polysomnographic (PSG) studies have inconsistently documented abnormalities and have therefore suggested "sleep state misperception." The authors' study objectives were to compare sleep parameters measured objectively and subjectively in the laboratory and at home in civilians with and without trauma exposure and PTSD. Cross-sectional study. PSG recordings in a sleep laboratory and actigraphic recordings in participants' homes. One hundred three urban-residing African Americans with and without trauma exposure and PTSD who participated in a larger study. N/A. Sleep parameters (total sleep time [TST], sleep onset latency [SOL], and wake after sleep onset [WASO]) were assessed using laboratory PSG and home actigraphy. A sleep diary was completed in the morning after PSG and actigraphy recordings. Habitual TST, SOL, and WASO were assessed using a sleep questionnaire. The Clinician Administered PTSD Scale was administered to assess participants' trauma exposure and PTSD diagnostic status. Participants, regardless of their trauma exposure/PTSD status, underestimated WASO in the diary and questionnaire relative to actigraphy and overestimated SOL in the diary relative to PSG. Among participants with current PTSD, TST diary estimates did not differ from the actigraphy measure in contrast with those without current PTSD who overestimated TST. No other significant group differences in discrepancies between subjective and objective sleep measures were found. Discrepancies between subjectively and objectively measured sleep parameters were not associated with trauma exposure or PTSD. This challenges prior assertions that individuals with PTSD overreport their sleep disturbances.

Cross-sectional associations of objectively measured physical activity with brain-derived neurotrophic factor in adolescents.

PubMed

Huang, Tao; Gejl, Anne Kær; Tarp, Jakob; Andersen, Lars Bo; Peijs, Lone; Bugge, Anna

2017-03-15

The purpose of this study was to examine the associations between objectively measured physical activity and serum brain-derived neurotrophic factor (BDNF) in adolescents. Cross-sectional analyses were performed using data from 415 adolescents who participated in the 2015 follow-up of the Childhood Health Activity and Motor Performance School Study Denmark (the CHAMPS-study DK). Physical activity was objectively measured by accelerometry monitors. Serum BDNF levels were analyzed using the Enzyme-linked immunosorbent assay (ELISA). Anthropometrics and pubertal status were measured using standardized procedures. With adjustment for age, pubertal status and body mass index, mean physical activity (counts per minute) was negatively associated with serum BDNF in boys (P=0.013). Similarly, moderate-to-vigorous physical activity (MVPA) was negatively associated with serum BDNF in boys (P=0.035). In girls, mean physical activity and MVPA were not associated with serum BDNF. Without adjustment for wear time, sedentary time was not associated with serum BDNF in either sex. These findings indicate that higher physical activity is associated with lower serum BDNF in boys, but not in girls. Copyright © 2016 Elsevier Inc. All rights reserved.

Research on measurement method of optical camouflage effect of moving object

NASA Astrophysics Data System (ADS)

Wang, Juntang; Xu, Weidong; Qu, Yang; Cui, Guangzhen

2016-10-01

Camouflage effectiveness measurement as an important part of the camouflage technology, which testing and measuring the camouflage effect of the target and the performance of the camouflage equipment according to the tactical and technical requirements. The camouflage effectiveness measurement of current optical band is mainly aimed at the static target which could not objectively reflect the dynamic camouflage effect of the moving target. This paper synthetical used technology of dynamic object detection and camouflage effect detection, the digital camouflage of the moving object as the research object, the adaptive background update algorithm of Surendra was improved, a method of optical camouflage effect detection using Lab-color space in the detection of moving-object was presented. The binary image of moving object is extracted by this measurement technology, in the sequence diagram, the characteristic parameters such as the degree of dispersion, eccentricity, complexity and moment invariants are constructed to construct the feature vector space. The Euclidean distance of moving target which through digital camouflage was calculated, the results show that the average Euclidean distance of 375 frames was 189.45, which indicated that the degree of dispersion, eccentricity, complexity and moment invariants of the digital camouflage graphics has a great difference with the moving target which not spray digital camouflage. The measurement results showed that the camouflage effect was good. Meanwhile with the performance evaluation module, the correlation coefficient of the dynamic target image range 0.1275 from 0.0035, and presented some ups and down. Under the dynamic condition, the adaptability of target and background was reflected. In view of the existing infrared camouflage technology, the next step, we want to carry out the camouflage effect measurement technology of the moving target based on infrared band.

Process for the reconstruction of three-dimensional images of an area of interest of an object comprising the combination of measurements over the entire object with measurements of an area of interest of said object, and appropriate installation

DOEpatents

Azevedo, Stephen; Grangeat, Pierre; Rizo, Philippe

1995-01-01

Process and installation making it possible to reconstitute precise images of an area of interest (2) of an object (1) by reducing the errors produced by the contribution of the compliment of the object. A first series of measurements is carried out, where a conical beam (10) only takes in the area of interest of the object (2) and this is followed by a second series of measurements in which the beam takes in the entire object. A combination of the measurements of the two series is carried out in order to make them compatible and obtain a more accurate image of the area of interest (2).

Objective measurement of bread crumb texture

NASA Astrophysics Data System (ADS)

Wang, Jian; Coles, Graeme D.

1995-01-01

Evaluation of bread crumb texture plays an important role in judging bread quality. This paper discusses the application of image analysis methods to the objective measurement of the visual texture of bread crumb. The application of Fast Fourier Transform and mathematical morphology methods have been discussed by the authors in their previous work, and a commercial bread texture measurement system has been developed. Based on the nature of bread crumb texture, we compare the advantages and disadvantages of the two methods, and a third method based on features derived directly from statistics of edge density in local windows of the bread image. The analysis of various methods and experimental results provides an insight into the characteristics of the bread texture image and interconnection between texture measurement algorithms. The usefulness of the application of general stochastic process modelling of texture is thus revealed; it leads to more reliable and accurate evaluation of bread crumb texture. During the development of these methods, we also gained useful insights into how subjective judges form opinions about bread visual texture. These are discussed here.

Short Daytime Naps Briefly Attenuate Objectively Measured Sleepiness Under Chronic Sleep Restriction.

PubMed

Saletin, Jared M; Hilditch, Cassie J; Dement, William C; Carskadon, Mary A

2017-09-01

Napping is a useful countermeasure to the negative effects of acute sleep loss on alertness. The efficacy of naps to recover from chronic sleep loss is less well understood. Following 2 baseline nights (10 hours' time-in-bed), participants were restricted to 7 nights of 5-hour sleep opportunity. Ten adults participated in the No-Nap condition, and a further 9 were assigned to a Nap condition with a daily 45-minute nap opportunity at 1300 h. Sleepiness was assessed using the multiple sleep latency test and a visual analogue scale at 2-hour intervals. Both objective and subjective indexes of sleepiness were normalized within subject as a difference from those at baseline prior to sleep restriction. Mixed-effects models examined how the daytime nap opportunity altered sleepiness across the day and across the protocol. Short daytime naps attenuated sleepiness due to chronic sleep restriction for up to 6-8 hours after the nap. Benefits of the nap did not extend late into evening. Subjective sleepiness demonstrated a similar short-lived benefit that emerged later in the day when objective sleepiness already returned to pre-nap levels. Neither measure showed a benefit of the nap the following morning after the subsequent restriction night. These data indicate a short daytime nap may attenuate sleepiness in chronic sleep restriction, yet subjective and objective benefits emerge at different time scales. Because neither measure showed a benefit the next day, the current study underscores the need for careful consideration before naps are used as routine countermeasures to chronic sleep loss. © Sleep Research Society 2017. Published by Oxford University Press on behalf of the Sleep Research Society. All rights reserved. For permissions, please e-mail journals.permissions@oup.com.

Vision System Measures Motions of Robot and External Objects

NASA Technical Reports Server (NTRS)

Talukder, Ashit; Matthies, Larry

2008-01-01

A prototype of an advanced robotic vision system both (1) measures its own motion with respect to a stationary background and (2) detects other moving objects and estimates their motions, all by use of visual cues. Like some prior robotic and other optoelectronic vision systems, this system is based partly on concepts of optical flow and visual odometry. Whereas prior optoelectronic visual-odometry systems have been limited to frame rates of no more than 1 Hz, a visual-odometry subsystem that is part of this system operates at a frame rate of 60 to 200 Hz, given optical-flow estimates. The overall system operates at an effective frame rate of 12 Hz. Moreover, unlike prior machine-vision systems for detecting motions of external objects, this system need not remain stationary: it can detect such motions while it is moving (even vibrating). The system includes a stereoscopic pair of cameras mounted on a moving robot. The outputs of the cameras are digitized, then processed to extract positions and velocities. The initial image-data-processing functions of this system are the same as those of some prior systems: Stereoscopy is used to compute three-dimensional (3D) positions for all pixels in the camera images. For each pixel of each image, optical flow between successive image frames is used to compute the two-dimensional (2D) apparent relative translational motion of the point transverse to the line of sight of the camera. The challenge in designing this system was to provide for utilization of the 3D information from stereoscopy in conjunction with the 2D information from optical flow to distinguish between motion of the camera pair and motions of external objects, compute the motion of the camera pair in all six degrees of translational and rotational freedom, and robustly estimate the motions of external objects, all in real time. To meet this challenge, the system is designed to perform the following image-data-processing functions: The visual-odometry subsystem

Associations between the Objectively Measured Office Environment and Workplace Step Count and Sitting Time: Cross-Sectional Analyses from the Active Buildings Study.

PubMed

Fisher, Abi; Ucci, Marcella; Smith, Lee; Sawyer, Alexia; Spinney, Richard; Konstantatou, Marina; Marmot, Alexi

2018-06-01

Office-based workers spend a large proportion of the day sitting and tend to have low overall activity levels. Despite some evidence that features of the external physical environment are associated with physical activity, little is known about the influence of the spatial layout of the internal environment on movement, and the majority of data use self-report. This study investigated associations between objectively-measured sitting time and activity levels and the spatial layout of office floors in a sample of UK office-based workers. Participants wore activPAL accelerometers for at least three consecutive workdays. Primary outcomes were steps and proportion of sitting time per working hour. Primary exposures were office spatial layout, which was objectively-measured by deriving key spatial variables: 'distance from each workstation to key office destinations', 'distance from participant's workstation to all other workstations', 'visibility of co-workers', and workstation 'closeness'. 131 participants from 10 organisations were included. Fifty-four per cent were female, 81% were white, and the majority had a managerial or professional role (72%) in their organisation. The average proportion of the working hour spent sitting was 0.7 (SD 0.15); participants took on average 444 (SD 210) steps per working hour. Models adjusted for confounders revealed significant negative associations between step count and distance from each workstation to all other office destinations (e.g., B = -4.66, 95% CI: -8.12, -1.12, p < 0.01) and nearest office destinations (e.g., B = -6.45, 95% CI: -11.88, -0.41, p < 0.05) and visibility of workstations when standing (B = -2.35, 95% CI: -3.53, -1.18, p < 0.001). The magnitude of these associations was small. There were no associations between spatial variables and sitting time per work hour. Contrary to our hypothesis, the further participants were from office destinations the less they walked, suggesting that changing the relative

Performance Measurement and Investment Objectives for Educational Endowment Funds.

ERIC Educational Resources Information Center

Williamson, J. Peter

This book is one of a series of projects developed to increase understanding of the management of educational endowment funds. Specifics of performance measurement and the setting of objectives are emphasized. Part one deals with measurement of the rate of return, or profitability, of an endowment fund. Part two reviews some statistical measures…

Real-time optical holographic tracking of multiple objects

NASA Technical Reports Server (NTRS)

Chao, Tien-Hsin; Liu, Hua-Kuang

1989-01-01

A coherent optical correlation technique for real-time simultaneous tracking of several different objects making independent movements is described, and experimental results are presented. An evaluation of this system compared with digital computing systems is made. The real-time processing capability is obtained through the use of a liquid crystal television spatial light modulator and a dichromated gelatin multifocus hololens. A coded reference beam is utilized in the separation of the output correlation plane associated with each input target so that independent tracking can be achieved.

If You're Not Measuring, You're Guessing: The Advent of Objective Concussion Assessments.

PubMed

Broglio, Steven P; Guskiewicz, Kevin M; Norwig, John

2017-03-01

Sport-related concussion remains one of the most complex injuries presented to sports medicine professionals. Although the injury has been recognized since ancient times, the concussion-assessment process has seen significant advances over the last 30 years. This review outlines the addition of objective measures to the clinical evaluation of the concussed athlete, beginning in the 1980s and continuing through the modern age. International and domestic organizations now describe standardized symptom reports, neurostatus and neurocognitive-function evaluations, and postural-control measures as standards of medical care, a significant shift from a short time ago. Despite this progression, much about the injury remains unknown, including new clinical and research-based assessment techniques and how the injury may influence the athlete's cognitive health over the long term.

Objectively measured physical activity of young Canadian children using accelerometry.

PubMed

Borkhoff, Cornelia M; Heale, Liane D; Anderson, Laura N; Tremblay, Mark S; Maguire, Jonathon L; Parkin, Patricia C; Birken, Catherine S

2015-12-01

The objective of the study was to describe objectively measured physical activity (PA) and sedentary time of infants, toddlers, and preschoolers and determine the proportion meeting Canadian age-specific PA guidelines. Ninety children (47 girls, 43 boys; mean age 32 (range, 4-70) months) attending scheduled health supervision visits and in the TARGet Kids! (The Applied Research Group for Kids) cohort wore an Actical accelerometer for 7 days. Participants with 4 or more valid days were included in the analysis. Time, in mean minutes per day (min/day), spent sedentary and in light PA, moderate to vigorous PA (MVPA), and total PA was determined using published cut-points; age groups were compared using ANOVA. Twenty-three percent of children <18 months (n = 28) and 76% of children aged 18-59 months (n = 45) met the guideline of 180 min/day of total PA; 13% of children ≥60 months (n = 17) met the guideline of 60 min/day of MVPA. Children <18 months spent more of their waking time per day engaged in sedentary behaviours (79%; ∼7.3 h) compared with children aged 18-59 months (63%; ∼6.6 h) and children ≥60 months (58%; ∼6.6 h). In conclusion, most children aged 18-59 months met the Canadian PA guidelines for children aged 0-4 years, whereas few younger than 18 months met the same guidelines. Only 13% of children ≥5 years met their age-specific PA guidelines. Further research is needed to develop, test, and implement effective strategies to promote PA and reduce sedentary behaviour in very young children.

Method and apparatus for measuring surface movement of a solid object that is subjected to external vibrations

DOEpatents

Schultz, Thomas J.; Kotidis, Petros A.; Woodroffe, Jaime A.; Rostler, Peter S.

1995-01-01

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

Method and apparatus for measuring surface movement of a solid object that is subjected to external vibrations

DOEpatents

Schultz, T.J.; Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

1995-04-25

A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figs.

Online decoding of object-based attention using real-time fMRI.

PubMed

Niazi, Adnan M; van den Broek, Philip L C; Klanke, Stefan; Barth, Markus; Poel, Mannes; Desain, Peter; van Gerven, Marcel A J

2014-01-01

Visual attention is used to selectively filter relevant information depending on current task demands and goals. Visual attention is called object-based attention when it is directed to coherent forms or objects in the visual field. This study used real-time functional magnetic resonance imaging for moment-to-moment decoding of attention to spatially overlapped objects belonging to two different object categories. First, a whole-brain classifier was trained on pictures of faces and places. Subjects then saw transparently overlapped pictures of a face and a place, and attended to only one of them while ignoring the other. The category of the attended object, face or place, was decoded on a scan-by-scan basis using the previously trained decoder. The decoder performed at 77.6% accuracy indicating that despite competing bottom-up sensory input, object-based visual attention biased neural patterns towards that of the attended object. Furthermore, a comparison between different classification approaches indicated that the representation of faces and places is distributed rather than focal. This implies that real-time decoding of object-based attention requires a multivariate decoding approach that can detect these distributed patterns of cortical activity. © 2013 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Angle Measurement of Objects outside the Linear Field of View of a Strapdown Semi-Active Laser Seeker.

PubMed

Zheng, Yongbin; Chen, Huimin; Zhou, Zongtan

2018-05-23

The accurate angle measurement of objects outside the linear field of view (FOV) is a challenging task for a strapdown semi-active laser seeker and is not yet well resolved. Considering the fact that the strapdown semi-active laser seeker is equipped with GPS and an inertial navigation system (INS) on a missile, in this work, we present an angle measurement method based on the fusion of the seeker’s data and GPS and INS data for a strapdown semi-active laser seeker. When an object is in the nonlinear FOV or outside the FOV, by solving the problems of space consistency and time consistency, the pitch angle and yaw angle of the object can be calculated via the fusion of the last valid angles measured by the seeker and the corresponding GPS and INS data. The numerical simulation results demonstrate the correctness and effectiveness of the proposed method.

Objective vs. self-reported physical activity and sedentary time: effects of measurement method on relationships with risk biomarkers.

PubMed

Celis-Morales, Carlos A; Perez-Bravo, Francisco; Ibañez, Luis; Salas, Carlos; Bailey, Mark E S; Gill, Jason M R

2012-01-01

Imprecise measurement of physical activity variables might attenuate estimates of the beneficial effects of activity on health-related outcomes. We aimed to compare the cardiometabolic risk factor dose-response relationships for physical activity and sedentary behaviour between accelerometer- and questionnaire-based activity measures. Physical activity and sedentary behaviour were assessed in 317 adults by 7-day accelerometry and International Physical Activity Questionnaire (IPAQ). Fasting blood was taken to determine insulin, glucose, triglyceride and total, LDL and HDL cholesterol concentrations and homeostasis model-estimated insulin resistance (HOMA(IR)). Waist circumference, BMI, body fat percentage and blood pressure were also measured. For both accelerometer-derived sedentary time (<100 counts.min(-1)) and IPAQ-reported sitting time significant positive (negative for HDL cholesterol) relationships were observed with all measured risk factors--i.e. increased sedentary behaviour was associated with increased risk (all p ≤ 0.01). However, for HOMA(IR) and insulin the regression coefficients were >50% lower for the IPAQ-reported compared to the accelerometer-derived measure (p<0.0001 for both interactions). The relationships for moderate-to-vigorous physical activity (MVPA) and risk factors were less strong than those observed for sedentary behaviours, but significant negative relationships were observed for both accelerometer and IPAQ MVPA measures with glucose, and insulin and HOMA(IR) values (all p<0.05). For accelerometer-derived MVPA only, additional negative relationships were seen with triglyceride, total cholesterol and LDL cholesterol concentrations, BMI, waist circumference and percentage body fat, and a positive relationship was evident with HDL cholesterol (p = 0.0002). Regression coefficients for HOMA(IR), insulin and triglyceride were 43-50% lower for the IPAQ-reported compared to the accelerometer-derived MVPA measure (all p≤0.01). Using the

Spatial filtering velocimetry of objective speckles for measuring out-of-plane motion.

PubMed

Jakobsen, M L; Yura, H T; Hanson, S G

2012-03-20

This paper analyzes the dynamics of objective laser speckles as the distance between the object and the observation plane continuously changes. With the purpose of applying optical spatial filtering velocimetry to the speckle dynamics, in order to measure out-of-plane motion in real time, a rotational symmetric spatial filter is designed. The spatial filter converts the speckle dynamics into a photocurrent with a quasi-sinusoidal response to the out-of-plane motion. The spatial filter is here emulated with a CCD camera, and is tested on speckles arising from a real application. The analysis discusses the selectivity of the spatial filter, the nonlinear response between speckle motion and observation distance, and the influence of the distance-dependent speckle size. Experiments with the emulated filters illustrate performance and potential applications of the technology. © 2012 Optical Society of America

Creating objective and measurable postgraduate year 1 residency graduation requirements.

PubMed

Starosta, Kaitlin; Davis, Susan L; Kenney, Rachel M; Peters, Michael; To, Long; Kalus, James S

2017-03-15

The process of developing objective and measurable postgraduate year 1 (PGY1) residency graduation requirements and a progress tracking system is described. The PGY1 residency accreditation standard requires that programs establish criteria that must be met by residents for successful completion of the program (i.e., graduation requirements), which should presumably be aligned with helping residents to achieve the purpose of residency training. In addition, programs must track a resident's progress toward fulfillment of residency goals and objectives. Defining graduation requirements and establishing the process for tracking residents' progress are left up to the discretion of the residency program. To help standardize resident performance assessments, leaders of an academic medical center-based PGY1 residency program developed graduation requirement criteria that are objective, measurable, and linked back to residency goals and objectives. A system for tracking resident progress relative to quarterly progress targets was instituted. Leaders also developed a focused, on-the-spot skills assessment termed "the Thunderdome," which was designed for objective evaluation of direct patient care skills. Quarterly data on residents' progress are used to update and customize each resident's training plan. Implementation of this system allowed seamless linkage of the training plan, the progress tracking system, and the specified graduation requirement criteria. PGY1 residency requirements that are objective, that are measurable, and that attempt to identify what skills the resident must demonstrate in order to graduate from the program were developed for use in our residency program. A system for tracking the residents' progress by comparing residents' performance to predetermined quarterly benchmarks was developed. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Real-Time Occlusion Handling in Augmented Reality Based on an Object Tracking Approach

PubMed Central

Tian, Yuan; Guan, Tao; Wang, Cheng

2010-01-01

To produce a realistic augmentation in Augmented Reality, the correct relative positions of real objects and virtual objects are very important. In this paper, we propose a novel real-time occlusion handling method based on an object tracking approach. Our method is divided into three steps: selection of the occluding object, object tracking and occlusion handling. The user selects the occluding object using an interactive segmentation method. The contour of the selected object is then tracked in the subsequent frames in real-time. In the occlusion handling step, all the pixels on the tracked object are redrawn on the unprocessed augmented image to produce a new synthesized image in which the relative position between the real and virtual object is correct. The proposed method has several advantages. First, it is robust and stable, since it remains effective when the camera is moved through large changes of viewing angles and volumes or when the object and the background have similar colors. Second, it is fast, since the real object can be tracked in real-time. Last, a smoothing technique provides seamless merging between the augmented and virtual object. Several experiments are provided to validate the performance of the proposed method. PMID:22319278

Objective measurement of daytime napping, cognitive dysfunction and subjective sleepiness in Parkinson's disease.

PubMed

Bolitho, Samuel J; Naismith, Sharon L; Salahuddin, Pierre; Terpening, Zoe; Grunstein, Ron R; Lewis, Simon J G

2013-01-01

Sleep-wake disturbances and concomitant cognitive dysfunction in Parkinson's disease (PD) contribute significantly to morbidity in patients and their carers. Subjectively reported daytime sleep disturbance is observed in over half of all patients with PD and has been linked to executive cognitive dysfunction. The current study used daytime actigraphy, a novel objective measure of napping and related this to neuropsychological performance in a sample of PD patients and healthy, age and gender-matched controls. Furthermore this study aimed to identify patients with PD who may benefit from pharmacologic and behavioural intervention to improve these symptoms. Eighty-five PD patients and 21 healthy, age-matched controls completed 14 days of wrist actigraphy within two weeks of neuropsychological testing. Objective napping measures were derived from actigraphy using a standardised protocol and subjective daytime sleepiness was recorded by the previously validated Epworth Sleepiness Scale. Patients with PD had a 225% increase in the mean nap time per day (minutes) as recorded by actigraphy compared to age matched controls (39.2 ± 35.2 vs. 11.5 ± 11.0 minutes respectively, p < 0.001). Significantly, differences in napping duration between patients, as recorded by actigraphy were not distinguished by their ratings on the subjective measurement of excessive daytime sleepiness. Finally, those patients with excessive daytime napping showed greater cognitive deficits in the domains of attention, semantic verbal fluency and processing speed. This study confirms increased levels of napping in PD, a finding that is concordant with subjective reports. However, subjective self-report measures of excessive daytime sleepiness do not robustly identify excessive napping in PD. Fronto-subcortical cognitive dysfunction was observed in those patients who napped excessively. Furthermore, this study suggests that daytime actigraphy, a non-invasive and inexpensive objective measure of

A chronometric exploration of high-resolution 'sensitive TMS masking' effects on subjective and objective measures of vision.

PubMed

de Graaf, Tom A; Herring, Jim; Sack, Alexander T

2011-03-01

Transcranial magnetic stimulation (TMS) can induce masking by interfering with ongoing neural activity in early visual cortex. Previous work has explored the chronometry of occipital involvement in vision by using single pulses of TMS with high temporal resolution. However, conventionally TMS intensities have been high and the only measure used to evaluate masking was objective in nature. Recent studies have begun to incorporate subjective measures of vision, alongside objective ones. The current study goes beyond previous work in two regards. First, we explored both objective vision (an orientation discrimination task) and subjective vision (a stimulus visibility rating on a four-point scale), across a wide range of time windows with high temporal resolution. Second, we used a very sensitive TMS-masking paradigm: stimulation was at relatively low TMS intensities, with a figure-8 coil, and the small stimulus was difficult to discriminate already at baseline level. We hypothesized that this should increase the effective temporal resolution of our paradigm. Perhaps for this reason, we are able to report a rather interesting masking curve. Within the classical-masking time window, previously reported to encompass broad SOAs anywhere between 60 and 120 ms, we report not one, but at least two dips in objective performance, with no masking in-between. The subjective measure of vision did not mirror this pattern. These preliminary data from our exploratory design suggest that, with sensitive TMS masking, we might be able to reveal visual processes in early visual cortex previously unreported.

Auditory-visual object recognition time suggests specific processing for animal sounds.

PubMed

Suied, Clara; Viaud-Delmon, Isabelle

2009-01-01

Recognizing an object requires binding together several cues, which may be distributed across different sensory modalities, and ignoring competing information originating from other objects. In addition, knowledge of the semantic category of an object is fundamental to determine how we should react to it. Here we investigate the role of semantic categories in the processing of auditory-visual objects. We used an auditory-visual object-recognition task (go/no-go paradigm). We compared recognition times for two categories: a biologically relevant one (animals) and a non-biologically relevant one (means of transport). Participants were asked to react as fast as possible to target objects, presented in the visual and/or the auditory modality, and to withhold their response for distractor objects. A first main finding was that, when participants were presented with unimodal or bimodal congruent stimuli (an image and a sound from the same object), similar reaction times were observed for all object categories. Thus, there was no advantage in the speed of recognition for biologically relevant compared to non-biologically relevant objects. A second finding was that, in the presence of a biologically relevant auditory distractor, the processing of a target object was slowed down, whether or not it was itself biologically relevant. It seems impossible to effectively ignore an animal sound, even when it is irrelevant to the task. These results suggest a specific and mandatory processing of animal sounds, possibly due to phylogenetic memory and consistent with the idea that hearing is particularly efficient as an alerting sense. They also highlight the importance of taking into account the auditory modality when investigating the way object concepts of biologically relevant categories are stored and retrieved.

Low-cost standalone multi-sensor thermometer for long time measurements

NASA Astrophysics Data System (ADS)

Kumchaiseemak, Nakorn; Hormwantha, Tongchai; Wungmool, Piyachat; Suwanatus, Suchat; Kanjai, Supaporn; Lertkitthaworn, Thitima; Jutamanee, Kanapol; Luengviriya, Chaiya

2017-09-01

We present a portable device for long-time recording of the temperature at multiple measuring points. Thermocouple wires are utilized as the sensors attached to the objects. To minimize the production cost, the measured voltage signals are relayed via a multiplexer to a set of amplifiers and finally to a single microcontroller. The observed temperature and the corresponding date and time, obtained from a real-time clock circuit, are recorded in a memory card for further analysis. The device is powered by a rechargeable battery and placed in a rainproof container, thus it can operate under outdoor conditions. A demonstration of the device usage in a mandarin orange cultivation field of the Royal project, located in the northern Thailand, is illustrated.

The beam stop array method to measure object scatter in digital breast tomosynthesis

NASA Astrophysics Data System (ADS)

Lee, Haeng-hwa; Kim, Ye-seul; Park, Hye-Suk; Kim, Hee-Joung; Choi, Jae-Gu; Choi, Young-Wook

2014-03-01

Scattered radiation is inevitably generated in the object. The distribution of the scattered radiation is influenced by object thickness, filed size, object-to-detector distance, and primary energy. One of the investigations to measure scatter intensities involves measuring the signal detected under the shadow of the lead discs of a beam-stop array (BSA). The measured scatter by BSA includes not only the scattered radiation within the object (object scatter), but also the external scatter source. The components of external scatter source include the X-ray tube, detector, collimator, x-ray filter, and BSA. Excluding background scattered radiation can be applied to different scanner geometry by simple parameter adjustments without prior knowledge of the scanned object. In this study, a method using BSA to differentiate scatter in phantom (object scatter) from external background was used. Furthermore, this method was applied to BSA algorithm to correct the object scatter. In order to confirm background scattered radiation, we obtained the scatter profiles and scatter fraction (SF) profiles in the directions perpendicular to the chest wall edge (CWE) with and without scattering material. The scatter profiles with and without the scattering material were similar in the region between 127 mm and 228 mm from chest wall. This result indicated that the measured scatter by BSA included background scatter. Moreover, the BSA algorithm with the proposed method could correct the object scatter because the total radiation profiles of object scatter correction corresponded to original image in the region between 127 mm and 228 mm from chest wall. As a result, the BSA method to measure object scatter could be used to remove background scatter. This method could apply for different scanner geometry after background scatter correction. In conclusion, the BSA algorithm with the proposed method is effective to correct object scatter.

Uncertainty modelling of real-time observation of a moving object: photogrammetric measurements

NASA Astrophysics Data System (ADS)

Ulrich, Thomas

2015-04-01

Photogrametric systems are widely used in the field of industrial metrology to measure kinematic tasks such as tracking robot movements. In order to assess spatiotemporal deviations of a kinematic movement, it is crucial to have a reliable uncertainty of the kinematic measurements. Common methods to evaluate the uncertainty in kinematic measurements include approximations specified by the manufactures, various analytical adjustment methods and Kalman filters. Here a hybrid system estimator in conjunction with a kinematic measurement model is applied. This method can be applied to processes which include various types of kinematic behaviour, constant velocity, variable acceleration or variable turn rates. Additionally, it has been shown that the approach is in accordance with GUM (Guide to the Expression of Uncertainty in Measurement). The approach is compared to the Kalman filter using simulated data to achieve an overall error calculation. Furthermore, the new approach is used for the analysis of a rotating system as this system has both a constant and a variable turn rate. As the new approach reduces overshoots it is more appropriate for analysing kinematic processes than the Kalman filter. In comparison with the manufacturer’s approximations, the new approach takes account of kinematic behaviour, with an improved description of the real measurement process. Therefore, this approach is well-suited to the analysis of kinematic processes with unknown changes in kinematic behaviour.

Time-measurement-regulating peptide PIN may alter a timer conformation of Time Interval Measuring Enzyme (TIME).

PubMed

Ti, Xiaonan; Tani, Naoki; Isobe, Minoru; Kai, Hidenori

2006-05-01

The TIME (Time Interval Measuring Enzyme) ATPase measures time intervals in accordance with diapause development, which indispensably requires cold for resumption of embryonic development in the silkworm (Bombyx mori). The PIN (Peptidyl Inhibitory Needle) peptide regulates the time measurement function of TIME. In the present study we investigated the interaction between TIME and PIN in order to address the mechanism of diapause development. When TIME was isolated from eggs later than 12 days after oviposition, transient bursts of ATPase activity occurred 18h after isolation of TIME, and the younger the eggs and pupal ovaries from which TIME was isolated, the earlier the bursts of ATPase activity appeared. However, no interval-timer activation of ATPase occurred in ovaries earlier than 6 days after pupation. Similar patterns of ATPase activity occurred in test tubes after mixing TIME with PIN. The shorter the time PIN was mixed with TIME, the earlier the ATPase activity appeared. The timer may be built into the protein conformation of TIME, and PIN (which is present in ovaries beginning 6 days after pupation) appears able to alter this timer conformation through pupal stages to laid eggs. We discuss the possible mechanism of diapause development in relation to the timer mechanism of TIME.

Consumer Education--Home Economics. Performance Objectives. Criterion Measures. Home Economics.

ERIC Educational Resources Information Center

Duval County School Board, Jacksonville, FL.

Several intermediate performance objectives and corresponding criterion measures are listed for each of six terminal objectives for an 18-week consumer education-home economics course for 10th, 11th, and 12th grade students. Purposes listed for the course are to develop an understanding of the American market system, and how the individual affects…

Real-time detection of natural objects using AM-coded spectral matching imager

NASA Astrophysics Data System (ADS)

Kimachi, Akira

2004-12-01

This paper describes application of the amplitude-modulation (AM)-coded spectral matching imager (SMI) to real-time detection of natural objects such as human beings, animals, vegetables, or geological objects or phenomena, which are much more liable to change with time than artificial products while often exhibiting characteristic spectral functions associated with some specific activity states. The AM-SMI produces correlation between spectral functions of the object and a reference at each pixel of the correlation image sensor (CIS) in every frame, based on orthogonal amplitude modulation (AM) of each spectral channel and simultaneous demodulation of all channels on the CIS. This principle makes the SMI suitable to monitoring dynamic behavior of natural objects in real-time by looking at a particular spectral reflectance or transmittance function. A twelve-channel multispectral light source was developed with improved spatial uniformity of spectral irradiance compared to a previous one. Experimental results of spectral matching imaging of human skin and vegetable leaves are demonstrated, as well as a preliminary feasibility test of imaging a reflective object using a test color chart.

Real-time detection of natural objects using AM-coded spectral matching imager

NASA Astrophysics Data System (ADS)

Kimachi, Akira

2005-01-01

This paper describes application of the amplitude-modulation (AM)-coded spectral matching imager (SMI) to real-time detection of natural objects such as human beings, animals, vegetables, or geological objects or phenomena, which are much more liable to change with time than artificial products while often exhibiting characteristic spectral functions associated with some specific activity states. The AM-SMI produces correlation between spectral functions of the object and a reference at each pixel of the correlation image sensor (CIS) in every frame, based on orthogonal amplitude modulation (AM) of each spectral channel and simultaneous demodulation of all channels on the CIS. This principle makes the SMI suitable to monitoring dynamic behavior of natural objects in real-time by looking at a particular spectral reflectance or transmittance function. A twelve-channel multispectral light source was developed with improved spatial uniformity of spectral irradiance compared to a previous one. Experimental results of spectral matching imaging of human skin and vegetable leaves are demonstrated, as well as a preliminary feasibility test of imaging a reflective object using a test color chart.

Correlational Analysis of Objective and Subjective Measures of Cataract Quantification.

PubMed

Cochener, Béatrice; Patel, Sunni R; Galliot, Florence

2016-02-01

To evaluate whether correlations exist between objective and subjective measures of vision quality as a consequence of cataract and whether this may qualify the Objective Scatter Index as a supplementary means of cataract assessment. A prospective multicenter, cross-sectional study was conducted in 10 centers across France in patients undergoing cataract extraction surgery (lens opacity evaluated with the Lens Opacities Classification System III). A quality of life assessment using the Visual Function Index-14 (VF-14) (14 questions scored from 0 to 4) and measurement of visual acuity and evaluation of the Objective Scatter Index (HD Analyzer, Visiometrics SL, Terrassa, Spain) to assess the alteration of light scatter were used as measures in the study. The study included 1,768 eyes of 1,768 patients (mean age: 72.5 years; range: 28 to 93 years). The average OSI score was 4.97 ± 3.13 (range: 0.4 to 20.5). There was good correlation between visual acuity and OSI (r = -0.47, P < .001) and between OSI and VF-14 (r = -0.11, P < .001). The results presented in this study confirm that the Objective Scatter Index has sufficient correlations with visual acuity and VF-14 to supplement existing cataract diagnosis in a large population encompassing a broad spectrum of cataract presentations. Copyright 2016, SLACK Incorporated.

Objectively Measured Activity Patterns among Adults in Residential Aged Care

PubMed Central

Reid, Natasha; Eakin, Elizabeth; Henwood, Timothy; Keogh, Justin W. L.; Senior, Hugh E.; Gardiner, Paul A.; Winkler, Elisabeth; Healy, Genevieve N.

2013-01-01

Objectives: To determine the feasibility of using the activPAL3TM activity monitor, and, to describe the activity patterns of residential aged care residents. Design: Cross-sectional. Setting: Randomly selected aged care facilities within 100 km of the Gold Coast, Queensland, Australia. Participants: Ambulatory, older (≥60 years) residential aged care adults without cognitive impairment. Measurements: Feasibility was assessed by consent rate, sleep/wear diary completion, and through interviews with staff/participants. Activity patterns (sitting/lying, standing, and stepping) were measured via activPAL3TM monitors worn continuously for seven days. Times spent in each activity were described and then compared across days of the week and hours of the day using linear mixed models. Results: Consent rate was 48% (n = 41). Activity patterns are described for the 31 participants (mean age 84.2 years) who provided at least one day of valid monitor data. In total, 14 (45%) completed the sleep/wear diary. Participants spent a median (interquartile range) of 12.4 (1.7) h sitting/lying (with 73% of this accumulated in unbroken bouts of ≥30 min), 1.9 (1.3) h standing, and 21.4 (36.7) min stepping during their monitored waking hours per day. Activity did not vary significantly by day of the week (p ≥ 0.05); stepping showed significant hourly variation (p = 0.018). Conclusions: Older adults in residential aged care were consistently highly sedentary. Feasibility considerations for objective activity monitoring identified for this population include poor diary completion and lost monitors. PMID:24304508

Objective measurements of activity patterns in people with newly diagnosed Type 2 diabetes demonstrate a sedentary lifestyle.

PubMed

Cichosz, S L; Fleischer, J; Hoeyem, P; Laugesen, E; Poulsen, P L; Christiansen, J S; Ejskjær, N; Hansen, T K

2013-09-01

To evaluate physical activity in people with newly diagnosed Type 2 diabetes using objective measures. We analysed data from a study aimed at assessing carotid femoral pulse wave velocity in which a piezoelectric accelerometer was worn by 100 people with newly diagnosed Type 2 diabetes and by 100 age- and sex-matched control subjects. Differences in physical activity patterns were investigated. Compared with the control group, the people with Type 2 diabetes spent significantly more time engaged in sedentary or lower level activities during the day, with a mean (sd) time of 926 (44) vs 898 (70) min, P < 0.001). This difference remained significant after correction for differences in BMI between the two groups. Using objective measurements, our findings demonstrate that people with newly diagnosed Type 2 diabetes have a more sedentary lifestyle compared with well-matched controls. © 2013 The Authors. Diabetic Medicine © 2013 Diabetes UK.

Real-time object detection and semantic segmentation for autonomous driving

NASA Astrophysics Data System (ADS)

Li, Baojun; Liu, Shun; Xu, Weichao; Qiu, Wei

2018-02-01

In this paper, we proposed a Highly Coupled Network (HCNet) for joint objection detection and semantic segmentation. It follows that our method is faster and performs better than the previous approaches whose decoder networks of different tasks are independent. Besides, we present multi-scale loss architecture to learn better representation for different scale objects, but without extra time in the inference phase. Experiment results show that our method achieves state-of-the-art results on the KITTI datasets. Moreover, it can run at 35 FPS on a GPU and thus is a practical solution to object detection and semantic segmentation for autonomous driving.

The auditory nerve overlapped waveform (ANOW): A new objective measure of low-frequency hearing

NASA Astrophysics Data System (ADS)

Lichtenhan, Jeffery T.; Salt, Alec N.; Guinan, John J.

2015-12-01

One of the most pressing problems today in the mechanics of hearing is to understand the mechanical motions in the apical half of the cochlea. Almost all available measurements from the cochlear apex of basilar membrane or other organ-of-Corti transverse motion have been made from ears where the health, or sensitivity, in the apical half of the cochlea was not known. A key step in understanding the mechanics of the cochlear base was to trust mechanical measurements only when objective measures from auditory-nerve compound action potentials (CAPs) showed good preparation sensitivity. However, such traditional objective measures are not adequate monitors of cochlear health in the very low-frequency regions of the apex that are accessible for mechanical measurements. To address this problem, we developed the Auditory Nerve Overlapped Waveform (ANOW) that originates from auditory nerve output in the apex. When responses from the round window to alternating low-frequency tones are averaged, the cochlear microphonic is canceled and phase-locked neural firing interleaves in time (i.e., overlaps). The result is a waveform that oscillates at twice the probe frequency. We have demonstrated that this Auditory Nerve Overlapped Waveform - called ANOW - originates from auditory nerve fibers in the cochlear apex [8], relates well to single-auditory-nerve-fiber thresholds, and can provide an objective estimate of low-frequency sensitivity [7]. Our new experiments demonstrate that ANOW is a highly sensitive indicator of apical cochlear function. During four different manipulations to the scala media along the cochlear spiral, ANOW amplitude changed when either no, or only small, changes occurred in CAP thresholds. Overall, our results demonstrate that ANOW can be used to monitor cochlear sensitivity of low-frequency regions during experiments that make apical basilar membrane motion measurements.

Objective Measurement of Vocal Fatigue in Classically Trained Singers: A Pilot Study of Vocal Dosimetry Data

PubMed Central

Carroll, Thomas; Nix, John; Hunter, Eric; Titze, Ingo; Abaza, Mona

2016-01-01

Objectives To evaluate vocal fatigue by using objective and subjective measurements of dose recorded by the National Center for Voice and Speech (NCVS) Dosimeter™ (Dosimeter). Study Design and Setting Seven subjects completed a two-week study period. The Dosimeter recorded vocal load, soft phonation tasks and subjective soft voice ratings. Three vocal doses (time, distance, and cycle) were measured in classical singers' larynges during an intensive practice period. Results Spikes in vocal load are reflected as harsher subjective ratings on the same day as well as 24–72 hours later. When at least 48 hours of vocal rest occurred before a vocal load, improved subjective evaluations were seen after the load. Conclusions The NCVS Dosimeter appears to be an effective tool for data collection on prolonged use of the voice. Significance This is the first multi-day study comparing objective and subjective data on vocal fatigue in a group of professional singers. PMID:17011424

Perceived and Objective Measures of Neighborhood Environment for Physical Activity Among Mexican Adults, 2011

PubMed Central

Salvo, Deborah; Lamadrid-Figueroa, Héctor; Hernández, Bernardo; Rivera-Dommarco, Juan A.; Pratt, Michael

2016-01-01

Introduction Environmental supports for physical activity may help residents to be physically active. However, such supports might not help if residents’ perceptions of the built environment do not correspond with objective measures. We assessed the associations between objective and perceived measures of the built environment among adults in Cuernavaca, Mexico, and examined whether certain variables modified this relationship. Methods We conducted a population-based (n = 645) study in 2011 that used objective (based on geographic information systems) and perceived (by questionnaire) measures of the following features of the built environment: residential density, mixed-land use, intersection density, and proximity to parks and transit stops. We used linear regression to assess the adjusted associations between these measures and to identify variables modifying these relationships. Results Adjusted associations were significant for all features (P < .05) except intersection density and proximity to transit stops. Significantly stronger associations between perceived and objective measures were observed among participants with low socioeconomic status, participants who did not own a motor vehicle or did not meet physical activity recommendations, and participants perceiving parks as safe. Conclusion Perceived measures of residential density, mixed-land use, and proximity to parks are associated with objective environmental measures related to physical activity. However, in Mexico, it should not be assumed that perceived measures of intersection density and proximity to transit stops are the same as objective measures. Our results are consistent with those from high-income countries in that associations between perceived and objective measures are modified by individual sociodemographic and psychosocial factors. PMID:27281391

Speckle interferometry with temporal phase evaluation for measuring large-object deformation.

PubMed

Joenathan, C; Franze, B; Haible, P; Tiziani, H J

1998-05-01

We propose a new method for measuring large-object deformations byusing temporal evolution of the speckles in speckleinterferometry. The principle of the method is that by deformingthe object continuously, one obtains fluctuations in the intensity ofthe speckle. A large number of frames of the object motion arecollected to be analyzed later. The phase data for whole-objectdeformation are then retrieved by inverse Fourier transformation of afiltered spectrum obtained by Fourier transformation of thesignal. With this method one is capable of measuring deformationsof more than 100 mum, which is not possible using conventionalelectronic speckle pattern interferometry. We discuss theunderlying principle of the method and the results of theexperiments. Some nondestructive testing results are alsopresented.

Objective measurement of accommodative biometric changes using ultrasound biomicroscopy

PubMed Central

Ramasubramanian, Viswanathan; Glasser, Adrian

2015-01-01

PURPOSE To demonstrate that ultrasound biomicroscopy (UBM) can be used for objective quantitative measurements of anterior segment accommodative changes. SETTING College of Optometry, University of Houston, Houston, Texas, USA. DESIGN Prospective cross-sectional study. METHODS Anterior segment biometric changes in response to 0 to 6.0 diopters (D) of accommodative stimuli in 1.0 D steps were measured in eyes of human subjects aged 21 to 36 years. Imaging was performed in the left eye using a 35 MHz UBM (Vumax) and an A-scan ultrasound (A-5500) while the right eye viewed the accommodative stimuli. An automated Matlab image-analysis program was developed to measure the biometry parameters from the UBM images. RESULTS The UBM-measured accommodative changes in anterior chamber depth (ACD), lens thickness, anterior lens radius of curvature, posterior lens radius of curvature, and anterior segment length were statistically significantly (P < .0001) linearly correlated with accommodative stimulus amplitudes. Standard deviations of the UBM-measured parameters were independent of the accommodative stimulus demands (ACD 0.0176 mm, lens thickness 0.0294 mm, anterior lens radius of curvature 0.3350 mm, posterior lens radius of curvature 0.1580 mm, and anterior segment length 0.0340 mm). The mean difference between the A-scan and UBM measurements was −0.070 mm for ACD and 0.166 mm for lens thickness. CONCLUSIONS Accommodating phakic eyes imaged using UBM allowed visualization of the accommodative response, and automated image analysis of the UBM images allowed reliable, objective, quantitative measurements of the accommodative intraocular biometric changes. PMID:25804579

Galileon string measure and other modified measure extended objects

NASA Astrophysics Data System (ADS)

Vulfs, T. O.; Guendelman, E. I.

2017-12-01

We show that it is possible to formulate string theory as a “Galileon string theory”. The Galileon field χ enters in the definition of the integration measure in the action. Following the methods of the modified measure string theory, we find that the final equations are again those of the sigma-model. Moreover, the string tension appears again as an additional dynamical degree of freedom. At the same time, the theory satisfies all requirements of the Galileon higher derivative theory at the action level while the equations of motion are still of the second-order. A Galileon symmetry is displayed explicitly in the conformal string worldsheet frame. Also, we define the Galileon gauge transformations. Generalizations to branes with other modified measures are discussed.

Non-contact local temperature measurement inside an object using an infrared point detector

NASA Astrophysics Data System (ADS)

Hisaka, Masaki

2017-04-01

Local temperature measurement in deep areas of objects is an important technique in biomedical measurement. We have investigated a non-contact method for measuring temperature inside an object using a point detector for infrared (IR) light. An IR point detector with a pinhole was constructed and the radiant IR light emitted from the local interior of the object is photodetected only at the position of pinhole located in imaging relation. We measured the thermal structure of the filament inside the miniature bulb using the IR point detector, and investigated the temperature dependence at approximately human body temperature using a glass plate positioned in front of the heat source.

Measurement of Cognitive Load in Multimedia Learning: A Comparison of Different Objective Measures

ERIC Educational Resources Information Center

Korbach, Andreas; Brünken, Roland; Park, Babette

2017-01-01

Different indicators are interesting for analyzing human learning processes. Recent studies analyze learning performance in combination with cognitive load, as an indicator for learners' invested mental effort. In order to compare different measures of cognitive load research, the present study uses three different objective methods and one…

Real-time dangling objects sensing: A preliminary design of mobile headset ancillary device for visual impaired.

PubMed

Lin, C H; Cheng, P H; Shen, S T

2014-01-01

Blinds and severe visual impairments can utilize tactile sticks to assist their walking. However, they cannot fully understand the dangling objects in front of their walking routes. This research proposed a mobile real-time dangling objects sensing (RDOS) prototype, which is located on the cap to sense any front barrier. This device utilized cheap ultrasonic sensor to act as another complement eye for blinds to understand the front dangling objects. Meanwhile, the RDOS device can dynamically adjust the sensor's front angle that is depended on the user's body height and promote the sensing accuracy. Meanwhile, two major required algorithms, height-angle measurement and ultrasonic sensor alignment, are proposed with this prototype. The research team also integrated the RDOS device prototype with mobile Android devices by communicating with Bluetooth to record the walking route.

Travel time data collection for measurement of advanced traveler information systems accuracy

DOT National Transportation Integrated Search

2003-06-01

The objective of this white paper is to recommend an approach to measuring ATIS travel time accuracy so that ITS planners might have the data they need to make cost effective decisions regarding deployment of surveillance technologies to support ATIS...

Objective measurements to evaluate glottal space segmentation from laryngeal images.

PubMed

Gutiérrez-Arriola, J M; Osma-Ruiz, V; Sáenz-Lechón, N; Godino-Llorente, J I; Fraile, R; Arias-Londoño, J D

2012-01-01

Objective evaluation of the results of medical image segmentation is a known problem. Applied to the task of automatically detecting the glottal area from laryngeal images, this paper proposes a new objective measurement to evaluate the quality of a segmentation algorithm by comparing with the results given by a human expert. The new figure of merit is called Area Index, and its effectiveness is compared with one of the most used figures of merit found in the literature: the Pratt Index. Results over 110 laryngeal images presented high correlations between both indexes, demonstrating that the proposed measure is comparable to the Pratt Index and it is a good indicator of the segmentation quality.

Timing of repetition suppression of event-related potentials to unattended objects.

PubMed

Stefanics, Gabor; Heinzle, Jakob; Czigler, István; Valentini, Elia; Stephan, Klaas Enno

2018-05-26

Current theories of object perception emphasize the automatic nature of perceptual inference. Repetition suppression (RS), the successive decrease of brain responses to repeated stimuli, is thought to reflect the optimization of perceptual inference through neural plasticity. While functional imaging studies revealed brain regions that show suppressed responses to the repeated presentation of an object, little is known about the intra-trial time course of repetition effects to everyday objects. Here we used event-related potentials (ERP) to task-irrelevant line-drawn objects, while participants engaged in a distractor task. We quantified changes in ERPs over repetitions using three general linear models (GLM) that modelled RS by an exponential, linear, or categorical "change detection" function in each subject. Our aim was to select the model with highest evidence and determine the within-trial time-course and scalp distribution of repetition effects using that model. Model comparison revealed the superiority of the exponential model indicating that repetition effects are observable for trials beyond the first repetition. Model parameter estimates revealed a sequence of RS effects in three time windows (86-140ms, 322-360ms, and 400-446ms) and with occipital, temporo-parietal, and fronto-temporal distribution, respectively. An interval of repetition enhancement (RE) was also observed (320-340ms) over occipito-temporal sensors. Our results show that automatic processing of task-irrelevant objects involves multiple intervals of RS with distinct scalp topographies. These sequential intervals of RS and RE might reflect the short-term plasticity required for optimization of perceptual inference and the associated changes in prediction errors (PE) and predictions, respectively, over stimulus repetitions during automatic object processing. This article is protected by copyright. All rights reserved. © 2018 The Authors European Journal of Neuroscience published by

Correlates of non-concordance between perceived and objective measures of walkability.

PubMed

Gebel, Klaus; Bauman, Adrian; Owen, Neville

2009-04-01

Objective and self-reported physical environmental attributes have been related to physical activity. We examined the characteristics of adults who are resident in objectively identified high walkable neighborhoods but whose perceptions of neighborhood attributes are not concordant with objective attributes relating to high walkability. Neighborhood built-environment attributes relating to walkability (dwelling density, intersection density, land use mix, and net retail area) were determined objectively, using Geographic Information System databases; data on corresponding perceptions of local environment attributes (from the Neighborhood Environment Walkability Scale) were derived from a self-completion survey of a socially diverse sample of 2,650 adults aged 19 to 65. Objective and perceived walkability attributes were categorized using median splits, and correlates of non-concordance were determined using multiple logistic regression models. There was a fair overall agreement between objectively determined walkability and perceived walkability (Kappa = 0.35, 95% CI = 0.31-0.39). Among those resident in objectively assessed high walkable areas (n = 1,063), 32.1% perceived them to be low walkable; conversely, 32.7% (n = 1,021) resident in objectively determined low walkability areas perceived them to be high. For residents of objectively determined high walkable areas, the characteristics that differentiated those with perceptions of low walkability (non-concordant perceptions) from those with concordant perceptions of high walkability were: not being university-educated (OR = 1.47, 95% CI = 1.06-2.04); having lower household incomes (OR = 1.54, 95% CI = 1.09-2.17); being overweight (OR = 1.46, 95% CI = 1.03-2.07); and walking fewer days per week for transport (OR = 1.75, 95% CI = 1.11-2.70). Higher walking times and more positive cognitive variables were noted among participants who lived in a neighborhood with low walkability that was perceived as high compared

Object-orientated DBMS techniques for time-oriented medical record.

PubMed

Pinciroli, F; Combi, C; Pozzi, G

1992-01-01

In implementing time-orientated medical record (TOMR) management systems, use of a relational model played a big role. Many applications have been developed to extend query and data manipulation languages to temporal aspects of information. Our experience in developing TOMR revealed some deficiencies inside the relational model, such as: (a) abstract data type definition; (b) unified view of data, at a programming level; (c) management of temporal data; (d) management of signals and images. We identified some first topics to face by an object-orientated approach to database design. This paper describes the first steps in designing and implementing a TOMR by an object-orientated DBMS.

Space Object Classification Using Fused Features of Time Series Data

NASA Astrophysics Data System (ADS)

Jia, B.; Pham, K. D.; Blasch, E.; Shen, D.; Wang, Z.; Chen, G.

In this paper, a fused feature vector consisting of raw time series and texture feature information is proposed for space object classification. The time series data includes historical orbit trajectories and asteroid light curves. The texture feature is derived from recurrence plots using Gabor filters for both unsupervised learning and supervised learning algorithms. The simulation results show that the classification algorithms using the fused feature vector achieve better performance than those using raw time series or texture features only.

Associating optical measurements of MEO and GEO objects using Population-Based Meta-Heuristic methods

NASA Astrophysics Data System (ADS)

Zittersteijn, M.; Vananti, A.; Schildknecht, T.; Dolado Perez, J. C.; Martinot, V.

2016-11-01

Currently several thousands of objects are being tracked in the MEO and GEO regions through optical means. The problem faced in this framework is that of Multiple Target Tracking (MTT). The MTT problem quickly becomes an NP-hard combinatorial optimization problem. This means that the effort required to solve the MTT problem increases exponentially with the number of tracked objects. In an attempt to find an approximate solution of sufficient quality, several Population-Based Meta-Heuristic (PBMH) algorithms are implemented and tested on simulated optical measurements. These first results show that one of the tested algorithms, namely the Elitist Genetic Algorithm (EGA), consistently displays the desired behavior of finding good approximate solutions before reaching the optimum. The results further suggest that the algorithm possesses a polynomial time complexity, as the computation times are consistent with a polynomial model. With the advent of improved sensors and a heightened interest in the problem of space debris, it is expected that the number of tracked objects will grow by an order of magnitude in the near future. This research aims to provide a method that can treat the association and orbit determination problems simultaneously, and is able to efficiently process large data sets with minimal manual intervention.

Real-time object-to-features vectorisation via Siamese neural networks

NASA Astrophysics Data System (ADS)

Fedorenko, Fedor; Usilin, Sergey

2017-03-01

Object-to-features vectorisation is a hard problem to solve for objects that can be hard to distinguish. Siamese and Triplet neural networks are one of the more recent tools used for such task. However, most networks used are very deep networks that prove to be hard to compute in the Internet of Things setting. In this paper, a computationally efficient neural network is proposed for real-time object-to-features vectorisation into a Euclidean metric space. We use L2 distance to reflect feature vector similarity during both training and testing. In this way, feature vectors we develop can be easily classified using K-Nearest Neighbours classifier. Such approach can be used to train networks to vectorise such "problematic" objects like images of human faces, keypoint image patches, like keypoints on Arctic maps and surrounding marine areas.

Measuring the circular motion of small objects using laser stroboscopic images.

PubMed

Wang, Hairong; Fu, Y; Du, R

2008-01-01

Measuring the circular motion of a small object, including its displacement, speed, and acceleration, is a challenging task. This paper presents a new method for measuring repetitive and/or nonrepetitive, constant speed and/or variable speed circular motion using laser stroboscopic images. Under stroboscopic illumination, each image taken by an ordinary camera records multioutlines of an object in motion; hence, processing the stroboscopic image will be able to extract the motion information. We built an experiment apparatus consisting of a laser as the light source, a stereomicroscope to magnify the image, and a normal complementary metal oxide semiconductor camera to record the image. As the object is in motion, the stroboscopic illumination generates a speckle pattern on the object that can be recorded by the camera and analyzed by a computer. Experimental results indicate that the stroboscopic imaging is stable under various conditions. Moreover, the characteristics of the motion, including the displacement, the velocity, and the acceleration can be calculated based on the width of speckle marks, the illumination intensity, the duty cycle, and the sampling frequency. Compared with the popular high-speed camera method, the presented method may achieve the same measuring accuracy, but with much reduced cost and complexity.

Effects of a Moving Distractor Object on Time-to-Contact Judgments

ERIC Educational Resources Information Center

Oberfeld, Daniel; Hecht, Heiko

2008-01-01

The effects of moving task-irrelevant objects on time-to-contact (TTC) judgments were examined in 5 experiments. Observers viewed a directly approaching target in the presence of a distractor object moving in parallel with the target. In Experiments 1 to 4, observers decided whether the target would have collided with them earlier or later than a…

Functional Requirements: 2014 No Child Left Behind--Annual Measurable Achievement Objectives

ERIC Educational Resources Information Center

Minnesota Department of Education, 2014

2014-01-01

This document describes the Minnesota No Child Left Behind (NCLB) calculation as it relates to measuring Title III districts for Annual Measurable Achievement Objectives (AMAO). In 2012, a new assessment was used to measure language proficiency skills for English Learners. New AMAO targets were created, and new values for determining individual…

Math: Figure and Object Characteristics. Measurement and Geometry. Grades K-9. Revised Edition.

ERIC Educational Resources Information Center

Instructional Objectives Exchange, Los Angeles, CA.

To help classroom teachers construct mathematics tests, thirty-seven general objectives, corresponding sub-objectives, sample test items, and answers are presented. In general, sub-objectives are arranged in increasing order of difficulty. The objectives were written to comprehensively cover two categories: measurement and geometry. Measurement…

TIME-INTERVAL MEASURING DEVICE

DOEpatents

Gross, J.E.

1958-04-15

An electronic device for measuring the time interval between two control pulses is presented. The device incorporates part of a previous approach for time measurement, in that pulses from a constant-frequency oscillator are counted during the interval between the control pulses. To reduce the possible error in counting caused by the operation of the counter gating circuit at various points in the pulse cycle, the described device provides means for successively delaying the pulses for a fraction of the pulse period so that a final delay of one period is obtained and means for counting the pulses before and after each stage of delay during the time interval whereby a plurality of totals is obtained which may be averaged and multplied by the pulse period to obtain an accurate time- Interval measurement.

Effects of Wind Turbine Noise on Self-Reported and Objective Measures of Sleep.

PubMed

Michaud, David S; Feder, Katya; Keith, Stephen E; Voicescu, Sonia A; Marro, Leonora; Than, John; Guay, Mireille; Denning, Allison; Murray, Brian J; Weiss, Shelly K; Villeneuve, Paul J; van den Berg, Frits; Bower, Tara

2016-01-01

To investigate the association between self-reported and objective measures of sleep and wind turbine noise (WTN) exposure. The Community Noise and Health Study, a cross-sectional epidemiological study, included an in-house computer-assisted interview and sleep pattern monitoring over a 7 d period. Outdoor WTN levels were calculated following international standards for conditions that typically approximate the highest long-term average levels at each dwelling. Study data were collected between May and September 2013 from adults, aged 18-79 y (606 males, 632 females) randomly selected from each household and living between 0.25 and 11.22 kilometers from operational wind turbines in two Canadian provinces. Self-reported sleep quality over the past 30 d was assessed using the Pittsburgh Sleep Quality Index. Additional questions assessed the prevalence of diagnosed sleep disorders and the magnitude of sleep disturbance over the previous year. Objective measures for sleep latency, sleep efficiency, total sleep time, rate of awakening bouts, and wake duration after sleep onset were recorded using the wrist worn Actiwatch2® from a subsample of 654 participants (289 males, 365 females) for a total of 3,772 sleep nights. Participant response rate for the interview was 78.9%. Outdoor WTN levels reached 46 dB(A) with an arithmetic mean of 35.6 and a standard deviation of 7.4. Self-reported and objectively measured sleep outcomes consistently revealed no apparent pattern or statistically significant relationship to WTN levels. However, sleep was significantly influenced by other factors, including, but not limited to, the use of sleep medication, other health conditions (including sleep disorders), caffeine consumption, and annoyance with blinking lights on wind turbines. Study results do not support an association between exposure to outdoor WTN up to 46 dB(A) and an increase in the prevalence of disturbed sleep. Conclusions are based on WTN levels averaged over 1 y and, in

Determinants of Objectively Measured Physical Functional Performance in Early to Mid-stage Parkinson Disease

PubMed Central

Kluger, Benzi M.; Brown, R. Preston; Aerts, Shanae; Schenkman, Margaret

2014-01-01

Background Parkinson disease (PD) may lead to functional limitations through both motor and non-motor symptoms. While patients with advanced disease have well-documented and profound functional limitations, less is known about the determinants of function in early to mid-stage disease where interventions may be more likely to benefit and preserve function. Objective The objective of the current study was to identify motor, cognitive and gait determinants of physical functional performance in patients with early to mid-stage PD. Design Secondary analysis of cross-sectional baseline data from a randomized clinical trial of exercise. Setting Tertiary academic medical center. Participants 121 patients with early to mid-stage PD. Methods Our functional performance outcomes included: 1) the Continuous Scale Functional Performance Test (CS-PFP; primary outcome); 2) the timed up and go (TUG) tests; and Section 2 (Activities of Daily Living) of the Unified Parkinson's Disease Rating Scale (UPDRS). Explanatory variables included measures of disease severity, motor function, cognitive function, balance and gait. Step-wise linear regression models were used to determine correlations between explanatory variables and outcome measures. Results In our regression models the CS-PFP significantly correlated with walking endurance (six minute walk; r2 = 0.12, p < .0001), turning ability (360 degree turn; r2 = .03, p = .002), attention (brief test of attention; r2 = .01, p = .03), overall cognitive status (Mini-mental State Examination; r2 = .01, p = .04) and bradykinesia (timed tapping; r2 = .02, p = .02). The TUG significantly correlated with walking speed (5 meter walk; r2 = 0.33, p <.0001), stride length (r2 = 0.25, p <.0001), turning ability (360 turn r2 = .05, p = .0003) and attention (r2 = .016, p = .03). Section 2 of the UPDRS was significantly correlated with endurance (r2 = .09, p < .0001), turning ability (r2 = .03, p = .001) and attention (r2 = .01, p = .03). Conclusions

Objectively Measured Light Exposure During School and Summer in Children.

PubMed

Ostrin, Lisa A; Sajjadi, Auzita; Benoit, Julia S

2018-04-01

Significant differences in light exposure were observed between school and summer in children, whereas activity and sleep were similar. Associations between parent and child behaviors suggest a potential mechanism for how myopia is transmitted from parents to children through patterns of environmental exposure, in addition to genetic factors. Objectively measured time outdoors, light exposure, activity, and sleep were examined in children during school and summer and assessed with eye growth. Associations between parent and child behaviors were evaluated. Children (aged 7.6 ± 1.8 years, n = 60) in Houston, TX, wore an actigraph device for three 2-week sessions (fall school, spring school, summer) to quantify time outdoors, light exposure, activity, and sleep. Cycloplegic autorefraction (WAM-5500; Grand-Seiko, Tokyo, Japan) and axial length (LenStar; Haag-Streit AG, Koeniz, Switzerland) were measured at baseline and 1 year. A subset of parents wore the device during their child's first 2-week session to compare behaviors (n = 33). Children spent 94.4 ± 30.6 minutes per day outdoors in spring, 110.6 ± 45.7 minutes in summer, and 72.2 ± 31.0 minutes in fall, with significant differences between sessions (P < .0001). Daily activity and sleep duration were similar across sessions (P = .73 and .06, respectively). Axial growth rate decreased with light exposure, but did not reach significance after adjusting for baseline axial length, age, sex, activity, and parental myopia (P = .073). Parent and child time outdoors and sleep duration were significantly correlated (P = .0002 and 0.026, respectively). Significant differences in light exposure were observed between school and summer, whereas activity and sleep were constant throughout the year. Children's behaviors were associated with their parent's behaviors, which may represent a modifiable component to potential environmental influences on eye growth. However, light exposure was not a significant environmental

Linear and Nonlinear Time-Frequency Analysis for Parameter Estimation of Resident Space Objects

DTIC Science & Technology

2017-02-22

AFRL-AFOSR-UK-TR-2017-0023 Linear and Nonlinear Time -Frequency Analysis for Parameter Estimation of Resident Space Objects Marco Martorella...estimated to average 1 hour per response, including the time for reviewing instructions, searching existing   data sources, gathering and maintaining the...Nonlinear Time -Frequency Analysis for Parameter Estimation of Resident Space Objects 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA9550-14-1-0183 5c.  PROGRAM

An efficient sequential approach to tracking multiple objects through crowds for real-time intelligent CCTV systems.

PubMed

Li, Liyuan; Huang, Weimin; Gu, Irene Yu-Hua; Luo, Ruijiang; Tian, Qi

2008-10-01

Efficiency and robustness are the two most important issues for multiobject tracking algorithms in real-time intelligent video surveillance systems. We propose a novel 2.5-D approach to real-time multiobject tracking in crowds, which is formulated as a maximum a posteriori estimation problem and is approximated through an assignment step and a location step. Observing that the occluding object is usually less affected by the occluded objects, sequential solutions for the assignment and the location are derived. A novel dominant color histogram (DCH) is proposed as an efficient object model. The DCH can be regarded as a generalized color histogram, where dominant colors are selected based on a given distance measure. Comparing with conventional color histograms, the DCH only requires a few color components (31 on average). Furthermore, our theoretical analysis and evaluation on real data have shown that DCHs are robust to illumination changes. Using the DCH, efficient implementations of sequential solutions for the assignment and location steps are proposed. The assignment step includes the estimation of the depth order for the objects in a dispersing group, one-by-one assignment, and feature exclusion from the group representation. The location step includes the depth-order estimation for the objects in a new group, the two-phase mean-shift location, and the exclusion of tracked objects from the new position in the group. Multiobject tracking results and evaluation from public data sets are presented. Experiments on image sequences captured from crowded public environments have shown good tracking results, where about 90% of the objects have been successfully tracked with the correct identification numbers by the proposed method. Our results and evaluation have indicated that the method is efficient and robust for tracking multiple objects (>or= 3) in complex occlusion for real-world surveillance scenarios.

3D shape measurement of moving object with FFT-based spatial matching

NASA Astrophysics Data System (ADS)

Guo, Qinghua; Ruan, Yuxi; Xi, Jiangtao; Song, Limei; Zhu, Xinjun; Yu, Yanguang; Tong, Jun

2018-03-01

This work presents a new technique for 3D shape measurement of moving object in translational motion, which finds applications in online inspection, quality control, etc. A low-complexity 1D fast Fourier transform (FFT)-based spatial matching approach is devised to obtain accurate object displacement estimates, and it is combined with single shot fringe pattern prolometry (FPP) techniques to achieve high measurement performance with multiple captured images through coherent combining. The proposed technique overcomes some limitations of existing ones. Specifically, the placement of marks on object surface and synchronization between projector and camera are not needed, the velocity of the moving object is not required to be constant, and there is no restriction on the movement trajectory. Both simulation and experimental results demonstrate the effectiveness of the proposed technique.

Objective Measure of Nasal Air Emission Using Nasal Accelerometry

ERIC Educational Resources Information Center

Cler, Meredith J.; Lien, Yu-An, S.; Braden, Maia N.; Mittleman, Talia; Downing, Kerri; Stepp, Cara, E.

2016-01-01

Purpose: This article describes the development and initial validation of an objective measure of nasal air emission (NAE) using nasal accelerometry. Method: Nasal acceleration and nasal airflow signals were simultaneously recorded while an expert speech language pathologist modeled NAEs at a variety of severity levels. In addition, microphone and…

Real-time tricolor phase measuring profilometry based on CCD sensitivity calibration

NASA Astrophysics Data System (ADS)

Zhu, Lin; Cao, Yiping; He, Dawu; Chen, Cheng

2017-02-01

A real-time tricolor phase measuring profilometry (RTPMP) based on charge coupled device (CCD) sensitivity calibration is proposed. Only one colour fringe pattern whose red (R), green (G) and blue (B) components are, respectively, coded as three sinusoidal phase-shifting gratings with an equivalent shifting phase of 2π/3 is needed and sent to an appointed flash memory on a specialized digital light projector (SDLP). A specialized time-division multiplexing timing sequence actively controls the SDLP to project the fringe patterns in R, G and B channels sequentially onto the measured object in one over seventy-two of a second and meanwhile actively controls a high frame rate monochrome CCD camera to capture the corresponding deformed patterns synchronously with the SDLP. So the sufficient information for reconstructing the three-dimensional (3D) shape in one over twenty-four of a second is obtained. Due to the different spectral sensitivity of the CCD camera to RGB lights, the captured deformed patterns from R, G and B channels cannot share the same peak and valley, which will lead to lower accuracy or even failing to reconstruct the 3D shape. So a deformed pattern amending method based on CCD sensitivity calibration is developed to guarantee the accurate 3D reconstruction. The experimental results verify the feasibility of the proposed RTPMP method. The proposed RTPMP method can obtain the 3D shape at over the video frame rate of 24 frames per second, avoid the colour crosstalk completely and be effective for measuring real-time changing object.

Distance Between Sets as an Objective Measure of Retrieval Effectiveness

ERIC Educational Resources Information Center

Heine, M. H.

1973-01-01

The Marczewski-Steinhaus metric provides what appears to be an objective general measure of retrieval effectiveness within the framework of set theory and the theory of metric spaces. (19 references) (Author/SJ)

Combination of optically measured coordinates and displacements for quantitative investigation of complex objects

NASA Astrophysics Data System (ADS)

Andrae, Peter; Beeck, Manfred-Andreas; Jueptner, Werner P. O.; Nadeborn, Werner; Osten, Wolfgang

1996-09-01

Holographic interferometry makes it possible to measure high precision displacement data in the range of the wavelength of the used laser light. However, the determination of 3D- displacement vectors of objects with complex surfaces requires the measurement of 3D-object coordinates not only to consider local sensitivities but to distinguish between in-plane deformation, i.e. strains, and out-of-plane components, i.e. shears, too. To this purpose both the surface displacement and coordinates have to be combined and it is advantageous to make the data available for CAE- systems. The object surface has to be approximated analytically from the measured point cloud to generate a surface mesh. The displacement vectors can be assigned to the nodes of this surface mesh for visualization of the deformation of the object under test. They also can be compared to the results of FEM-calculations or can be used as boundary conditions for further numerical investigations. Here the 3D-object coordinates are measured in a separate topometric set-up using a modified fringe projection technique to acquire absolute phase values and a sophisticated geometrical model to map these phase data onto coordinates precisely. The determination of 3D-displacement vectors requires the measurement of several interference phase distributions for at least three independent sensitivity directions depending on the observation and illumination directions as well as the 3D-position of each measuring point. These geometric quantities have to be transformed into a reference coordinate system of the interferometric set-up in order to calculate the geometric matrix. The necessary transformation can be realized by means of a detection of object features in both data sets and a subsequent determination of the external camera orientation. This paper presents a consistent solution for the measurement and combination of shape and displacement data including their transformation into simulation systems. The

Objectively Measured Sedentary Time and Cardiovascular Risk Factor Control in US Hispanics/Latinos With Diabetes Mellitus: Results From the Hispanic Community Health Study/Study of Latinos (HCHS/SOL).

PubMed

Wang, Xueyin; Strizich, Garrett; Hua, Simin; Sotres-Alvarez, Daniela; Buelna, Christina; Gallo, Linda C; Gellman, Marc D; Mossavar-Rahmani, Yasmin; O'Brien, Matthew J; Stoutenberg, Mark; Wang, Tao; Avilés-Santa, M Larissa; Kaplan, Robert C; Qi, Qibin

2017-05-25

Cardiovascular disease (CVD) risk factor control is a cornerstone of diabetes mellitus management. Little is known about relationships of objectively measured sedentary time and physical activity with major CVD risk factor control in individuals with diabetes mellitus. We examined associations of objectively measured sedentary time and moderate-to-vigorous physical activity with reaching major CVD risk factor control goals among US Hispanic/Latino adults with diabetes mellitus. This cross-sectional analysis included 1699 participants with diabetes mellitus from the Hispanic Community Health Study/Study of Latinos (2008-2011). Logistic regression models were used to estimate the odds ratios (ORs) of meeting the following 5 major CVD risk factor control goals: hemoglobin A 1c <7.0%; systolic/diastolic blood pressure <140/80 mm Hg; triglycerides <150 mg/dL; low-density lipoprotein cholesterol <100 mg/dL; and high-density lipoprotein cholesterol >40/50 mg/dL for men/women. After adjustment for covariates including moderate-to-vigorous physical activity, less sedentary time was associated with increased odds of reaching hemoglobin A 1c (OR=1.76 [95% CI: 1.10, 2.82]) and triglyceride control goals (OR=2.16 [1.36, 3.46]), and reaching ≥3 CVD risk factor control goals (OR=2.08 [1.34, 3.23]) (all ORs for comparisons of extreme tertiles of sedentary time). Moderate-to-vigorous physical activity was not associated with reaching any CVD risk factor control goals. Substituting 60-min/day of sedentary time with light-intensity physical activity was associated with increased odds of reaching hemoglobin A 1c (OR=1.18 [1.04, 1.35]), high-density lipoprotein cholesterol (OR=1.17 [1.04, 1.32]), and triglyceride (OR=1.20 [1.05, 1.36]) control goals. Among US Hispanic/Latino adults with diabetes mellitus, less sedentary time, but not moderate-to-vigorous physical activity, was associated with improved CVD risk factor control, specifically in reaching hemoglobin A 1c and

Multiple wavelength interferometry for distance measurements of moving objects with nanometer uncertainty

NASA Astrophysics Data System (ADS)

Kuschmierz, R.; Czarske, J.; Fischer, A.

2014-08-01

Optical measurement techniques offer great opportunities in diverse applications, such as lathe monitoring and microfluidics. Doppler-based interferometric techniques enable simultaneous measurement of the lateral velocity and axial distance of a moving object. However, there is a complementarity between the unambiguous axial measurement range and the uncertainty of the distance. Therefore, we present an extended sensor setup, which provides an unambiguous axial measurement range of 1 mm while achieving uncertainties below 100 nm. Measurements at a calibration system are performed. When using a pinhole for emulating a single scattering particle, the tumbling motion of the rotating object is resolved with a distance uncertainty of 50 nm. For measurements at the rough surface, the distance uncertainty amounts to 280 nm due to a lower signal-to-noise ratio. Both experimental results are close to the respective Cramér-Rao bound, which is derived analytically for both surface and single particle measurements.

Commercial border crossing and wait time measurement at the Pharr-Reynosa International Bridge.

DOT National Transportation Integrated Search

2010-11-01

The objective of the research described in this report is to install and implement radio frequency : identification (RFID) technology to measure border crossing time and travel delay for : commercial trucks crossing from Mexico into Texas at the Phar...

A dissociation of objective and subjective workload measures in assessing the impact of speech controls in advanced helicopters

NASA Technical Reports Server (NTRS)

Vidulich, Michael A.; Bortolussi, Michael R.

1988-01-01

Among the new technologies that are expected to aid helicopter designers are speech controls. Proponents suggest that speech controls could reduce the potential for manual control overloads and improve time-sharing performance in environments that have heavy demands for manual control. This was tested in a simulation of an advanced single-pilot, scout/attack helicopter. Objective performance indicated that the speech controls were effective in decreasing the interference of discrete responses during moments of heavy flight control activity. However, subjective ratings indicated that the use of speech controls required extra effort to speak precisely and to attend to feedback. Although the operational reliability of speech controls must be improved, the present results indicate that reliable speech controls could enhance the time-sharing efficiency of helicopter pilots. Furthermore, the results demonstrated the importance of using multiple assessment techniques to completely assess a task. Neither the objective nor the subjective measures alone provided complete information. It was the contrast between the measures that was most informative.

Subjective versus objective measures of tic severity in Tourette syndrome - The influence of environment.

PubMed

Barnea, Meirav; Benaroya-Milshtein, Noa; Gilboa-Sechtman, Eva; Woods, Douglas W; Piacentini, John; Fennig, Silvana; Apter, Alan; Steinberg, Tamar

2016-08-30

The objective of this study was to examine the influence of environmental challenges on tic expression by subjective and objective measures. The study group consisted of 41 children aged 6-18 years (M=10.15, SD=2.73) with a primary diagnosis of Tourette syndrome. Subjective measures included the Functional Assessment Interview developed for this study and three standard validated instruments. The objective measure was a video-recording of the patients in five daily-life situations: watching television, doing homework, being alone, receiving attention when ticcing, and talking to a stranger. In addition, the effect of premonitory urges on assessment of tic expression was evaluated. The associations between the subjective and objective measures of tic expression were moderate to low. A significantly higher number of tics were observed in the television situation, and a significantly lower number in the alone situation, compared to the other situations. Higher levels of premonitory urge were associated with greater awareness of objectively measured tic expression. In conclusion, tic expression is significantly influenced by the environment. Subjective measures of tic expression may be misleading. These results have implications for refining the clinical assessment of tics, improving research methodology, and developing new therapeutic strategies. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The correlation dimension: a useful objective measure of the transient visual evoked potential?

PubMed

Boon, Mei Ying; Henry, Bruce I; Suttle, Catherine M; Dain, Stephen J

2008-01-14

Visual evoked potentials (VEPs) may be analyzed by examination of the morphology of their components, such as negative (N) and positive (P) peaks. However, methods that rely on component identification may be unreliable when dealing with responses of complex and variable morphology; therefore, objective methods are also useful. One potentially useful measure of the VEP is the correlation dimension. Its relevance to the visual system was investigated by examining its behavior when applied to the transient VEP in response to a range of chromatic contrasts (42%, two times psychophysical threshold, at psychophysical threshold) and to the visually unevoked response (zero contrast). Tests of nonlinearity (e.g., surrogate testing) were conducted. The correlation dimension was found to be negatively correlated with a stimulus property (chromatic contrast) and a known linear measure (the Fourier-derived VEP amplitude). It was also found to be related to visibility and perception of the stimulus such that the dimension reached a maximum for most of the participants at psychophysical threshold. The latter suggests that the correlation dimension may be useful as a diagnostic parameter to estimate psychophysical threshold and may find application in the objective screening and monitoring of congenital and acquired color vision deficiencies, with or without associated disease processes.

The Deep Lens Survey : Real--time Optical Transient and Moving Object Detection

NASA Astrophysics Data System (ADS)

Becker, Andy; Wittman, David; Stubbs, Chris; Dell'Antonio, Ian; Loomba, Dinesh; Schommer, Robert; Tyson, J. Anthony; Margoniner, Vera; DLS Collaboration

2001-12-01

We report on the real-time optical transient program of the Deep Lens Survey (DLS). Meeting the DLS core science weak-lensing objective requires repeated visits to the same part of the sky, 20 visits for 63 sub-fields in 4 filters, on a 4-m telescope. These data are reduced in real-time, and differenced against each other on all available timescales. Our observing strategy is optimized to allow sensitivity to transients on several minute, one day, one month, and one year timescales. The depth of the survey allows us to detect and classify both moving and stationary transients down to ~ 25th magnitude, a relatively unconstrained region of astronomical variability space. All transients and moving objects, including asteroids, Kuiper belt (or trans-Neptunian) objects, variable stars, supernovae, 'unknown' bursts with no apparent host, orphan gamma-ray burst afterglows, as well as airplanes, are posted on the web in real-time for use by the community. We emphasize our sensitivity to detect and respond in real-time to orphan afterglows of gamma-ray bursts, and present one candidate orphan in the field of Abell 1836. See http://dls.bell-labs.com/transients.html.

Automatic trajectory measurement of large numbers of crowded objects

NASA Astrophysics Data System (ADS)

Li, Hui; Liu, Ye; Chen, Yan Qiu

2013-06-01

Complex motion patterns of natural systems, such as fish schools, bird flocks, and cell groups, have attracted great attention from scientists for years. Trajectory measurement of individuals is vital for quantitative and high-throughput study of their collective behaviors. However, such data are rare mainly due to the challenges of detection and tracking of large numbers of objects with similar visual features and frequent occlusions. We present an automatic and effective framework to measure trajectories of large numbers of crowded oval-shaped objects, such as fish and cells. We first use a novel dual ellipse locator to detect the coarse position of each individual and then propose a variance minimization active contour method to obtain the optimal segmentation results. For tracking, cost matrix of assignment between consecutive frames is trainable via a random forest classifier with many spatial, texture, and shape features. The optimal trajectories are found for the whole image sequence by solving two linear assignment problems. We evaluate the proposed method on many challenging data sets.

Deep Learning for Real-Time Capable Object Detection and Localization on Mobile Platforms

NASA Astrophysics Data System (ADS)

Particke, F.; Kolbenschlag, R.; Hiller, M.; Patiño-Studencki, L.; Thielecke, J.

2017-10-01

Industry 4.0 is one of the most formative terms in current times. Subject of research are particularly smart and autonomous mobile platforms, which enormously lighten the workload and optimize production processes. In order to interact with humans, the platforms need an in-depth knowledge of the environment. Hence, it is required to detect a variety of static and non-static objects. Goal of this paper is to propose an accurate and real-time capable object detection and localization approach for the use on mobile platforms. A method is introduced to use the powerful detection capabilities of a neural network for the localization of objects. Therefore, detection information of a neural network is combined with depth information from a RGB-D camera, which is mounted on a mobile platform. As detection network, YOLO Version 2 (YOLOv2) is used on a mobile robot. In order to find the detected object in the depth image, the bounding boxes, predicted by YOLOv2, are mapped to the corresponding regions in the depth image. This provides a powerful and extremely fast approach for establishing a real-time-capable Object Locator. In the evaluation part, the localization approach turns out to be very accurate. Nevertheless, it is dependent on the detected object itself and some additional parameters, which are analysed in this paper.

Objective Measurement of Daytime Napping, Cognitive Dysfunction and Subjective Sleepiness in Parkinson’s Disease

PubMed Central

Bolitho, Samuel J.; Naismith, Sharon L.; Salahuddin, Pierre; Terpening, Zoe; Grunstein, Ron R.; Lewis, Simon J. G.

2013-01-01

Introduction Sleep-wake disturbances and concomitant cognitive dysfunction in Parkinson’s disease (PD) contribute significantly to morbidity in patients and their carers. Subjectively reported daytime sleep disturbance is observed in over half of all patients with PD and has been linked to executive cognitive dysfunction. The current study used daytime actigraphy, a novel objective measure of napping and related this to neuropsychological performance in a sample of PD patients and healthy, age and gender-matched controls. Furthermore this study aimed to identify patients with PD who may benefit from pharmacologic and behavioural intervention to improve these symptoms. Methods Eighty-five PD patients and 21 healthy, age-matched controls completed 14 days of wrist actigraphy within two weeks of neuropsychological testing. Objective napping measures were derived from actigraphy using a standardised protocol and subjective daytime sleepiness was recorded by the previously validated Epworth Sleepiness Scale. Results Patients with PD had a 225% increase in the mean nap time per day (minutes) as recorded by actigraphy compared to age matched controls (39.2 ± 35.2 vs. 11.5 ± 11.0 minutes respectively, p < 0.001). Significantly, differences in napping duration between patients, as recorded by actigraphy were not distinguished by their ratings on the subjective measurement of excessive daytime sleepiness. Finally, those patients with excessive daytime napping showed greater cognitive deficits in the domains of attention, semantic verbal fluency and processing speed. Conclusion This study confirms increased levels of napping in PD, a finding that is concordant with subjective reports. However, subjective self-report measures of excessive daytime sleepiness do not robustly identify excessive napping in PD. Fronto-subcortical cognitive dysfunction was observed in those patients who napped excessively. Furthermore, this study suggests that daytime actigraphy, a non

Real-time moving objects detection and tracking from airborne infrared camera

NASA Astrophysics Data System (ADS)

Zingoni, Andrea; Diani, Marco; Corsini, Giovanni

2017-10-01

Detecting and tracking moving objects in real-time from an airborne infrared (IR) camera offers interesting possibilities in video surveillance, remote sensing and computer vision applications, such as monitoring large areas simultaneously, quickly changing the point of view on the scene and pursuing objects of interest. To fully exploit such a potential, versatile solutions are needed, but, in the literature, the majority of them works only under specific conditions about the considered scenario, the characteristics of the moving objects or the aircraft movements. In order to overcome these limitations, we propose a novel approach to the problem, based on the use of a cheap inertial navigation system (INS), mounted on the aircraft. To exploit jointly the information contained in the acquired video sequence and the data provided by the INS, a specific detection and tracking algorithm has been developed. It consists of three main stages performed iteratively on each acquired frame. The detection stage, in which a coarse detection map is computed, using a local statistic both fast to calculate and robust to noise and self-deletion of the targeted objects. The registration stage, in which the position of the detected objects is coherently reported on a common reference frame, by exploiting the INS data. The tracking stage, in which the steady objects are rejected, the moving objects are tracked, and an estimation of their future position is computed, to be used in the subsequent iteration. The algorithm has been tested on a large dataset of simulated IR video sequences, recreating different environments and different movements of the aircraft. Promising results have been obtained, both in terms of detection and false alarm rate, and in terms of accuracy in the estimation of position and velocity of the objects. In addition, for each frame, the detection and tracking map has been generated by the algorithm, before the acquisition of the subsequent frame, proving its

Detection and Tracking of Moving Objects with Real-Time Onboard Vision System

NASA Astrophysics Data System (ADS)

Erokhin, D. Y.; Feldman, A. B.; Korepanov, S. E.

2017-05-01

Detection of moving objects in video sequence received from moving video sensor is a one of the most important problem in computer vision. The main purpose of this work is developing set of algorithms, which can detect and track moving objects in real time computer vision system. This set includes three main parts: the algorithm for estimation and compensation of geometric transformations of images, an algorithm for detection of moving objects, an algorithm to tracking of the detected objects and prediction their position. The results can be claimed to create onboard vision systems of aircraft, including those relating to small and unmanned aircraft.

Evaluation of an activity monitor for the objective measurement of free-living physical activity in children with cerebral palsy.

PubMed

Tang, Kit Tzu; Richardson, Alison M; Maxwell, Douglas; Spence, William D; Stansfield, Benedict W

2013-12-01

To explore the use of an activity monitor (AM) to objectively characterize free-living physical activity (F-LPA) in children with mobility impairment resulting from cerebral palsy (CP). First, a validation study compared outcomes from the AM with video evidence. Second, multiday F-LPA was characterized. Relationships between laboratory measures and F-LPA were explored. The evaluation study was conducted in a laboratory environment. F-LPA monitoring was conducted in the participants' free-living environment. Convenience sample of ambulatory children (N=15; 11 boys, 4 girls) aged 5 to 17 years with CP undergoing gait analysis. Not applicable. Accuracy of the AM for sitting/lying time, upright time, stepping time, and strides taken. Daily volumes of F-LPA of children with CP. AM outcomes in comparison with video-based analysis were (mean ± SD) 97.4%±2.7%, 101.1%±1.5%, 99.5%±6.6%, 105.6%±15.8%, and 103.8%±10.1% for sitting/lying time, upright time, standing time, stepping time, and stride count, respectively. Participants' daily F-LPA demonstrated considerable variation: mean standing time ± SD, 2.33±.96h/d; mean stepping time ± SD, 1.68±.86h/d; mean steps per day ± SD, 8477±4528; and mean sit-to-stand transitions per day ± SD, 76±49. Laboratory-measured cadence and mobility level were related to F-LPA, but not directly. The AM demonstrated excellent ability to determine sitting/lying and upright times in children with CP. Stepping time and stride count had lower levels of agreement with video-based analysis but were comparable to findings in previous studies. Crouch gait and toe walking had an adverse effect on outcomes. The F-LPA data provided additional information on children's performance not related to laboratory measures, demonstrating the added value of using this objective measurement technique. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Objectively measured sedentary behavior in preschool children: comparison between Montessori and traditional preschools.

PubMed

Byun, Wonwoo; Blair, Steven N; Pate, Russell R

2013-01-03

This study aimed to compare the levels of objectively-measured sedentary behavior in children attending Montessori preschools with those attending traditional preschools. The participants in this study were preschool children aged 4 years old who were enrolled in Montessori and traditional preschools. The preschool children wore ActiGraph accelerometers. Accelerometers were initialized using 15-second intervals and sedentary behavior was defined as <200 counts/15-second. The accelerometry data were summarized into the average minutes per hour spent in sedentary behavior during the in-school, the after-school, and the total-day period. Mixed linear regression models were used to determine differences in the average time spent in sedentary behavior between children attending traditional and Montessori preschools, after adjusting for selected potential correlates of preschoolers' sedentary behavior. Children attending Montessori preschools spent less time in sedentary behavior than those attending traditional preschools during the in-school (44.4. min/hr vs. 47.1 min/hr, P = 0.03), after-school (42.8. min/hr vs. 44.7 min/hr, P = 0.04), and total-day (43.7 min/hr vs. 45.5 min/hr, P = 0. 009) periods. School type (Montessori or traditional), preschool setting (private or public), socio-demographic factors (age, gender, and socioeconomic status) were found to be significant predictors of preschoolers' sedentary behavior. Levels of objectively-measured sedentary behavior were significantly lower among children attending Montessori preschools compared to children attending traditional preschools. Future research should examine the specific characteristics of Montessori preschools that predict the lower levels of sedentary behavior among children attending these preschools compared to children attending traditional preschools.

Objectively measured sedentary behavior in preschool children: comparison between Montessori and traditional preschools

PubMed Central

2013-01-01

Background This study aimed to compare the levels of objectively-measured sedentary behavior in children attending Montessori preschools with those attending traditional preschools. Methods The participants in this study were preschool children aged 4 years old who were enrolled in Montessori and traditional preschools. The preschool children wore ActiGraph accelerometers. Accelerometers were initialized using 15-second intervals and sedentary behavior was defined as <200 counts/15-second. The accelerometry data were summarized into the average minutes per hour spent in sedentary behavior during the in-school, the after-school, and the total-day period. Mixed linear regression models were used to determine differences in the average time spent in sedentary behavior between children attending traditional and Montessori preschools, after adjusting for selected potential correlates of preschoolers’ sedentary behavior. Results Children attending Montessori preschools spent less time in sedentary behavior than those attending traditional preschools during the in-school (44.4. min/hr vs. 47.1 min/hr, P = 0.03), after-school (42.8. min/hr vs. 44.7 min/hr, P = 0.04), and total-day (43.7 min/hr vs. 45.5 min/hr, P = 0. 009) periods. School type (Montessori or traditional), preschool setting (private or public), socio-demographic factors (age, gender, and socioeconomic status) were found to be significant predictors of preschoolers’ sedentary behavior. Conclusions Levels of objectively-measured sedentary behavior were significantly lower among children attending Montessori preschools compared to children attending traditional preschools. Future research should examine the specific characteristics of Montessori preschools that predict the lower levels of sedentary behavior among children attending these preschools compared to children attending traditional preschools. PMID:23286454

Developing corridor-level truck travel time estimates and other freight performance measures from archived ITS data.

DOT National Transportation Integrated Search

2009-08-01

The objectives of this research were to retrospectively study the feasibility for using truck transponder data to produce freight corridor performance measures (travel times) and real-time traveler information. To support this analysis, weigh-in-moti...

Has work replaced home as a haven? Re-examining Arlie Hochschild's Time Bind proposition with objective stress data.

PubMed

Damaske, Sarah; Smyth, Joshua M; Zawadzki, Matthew J

2014-08-01

Using innovative data with objective and subjective measures of stress collected from 122 employed men and women, this paper tests the thesis of the Time Bind by asking whether people report lower stress levels at work than at home. The study finds consistent support for the Time Bind hypothesis when examining objective stress data: when participants were at work they had lower values of the stress hormone cortisol than when they were at home. Two variables moderated this association - income and children at home - such that the work as haven effect was stronger for those with lower incomes and no children living at home. Participants also, however, consistently reported higher subjective stress levels on work days than on non-work days, which is in direct contrast to the Time Bind hypothesis. Although our overall findings support Hochschild's hypothesis that stress levels are lower at work, it appears that combining work and home increases people's subjective experience of daily stress. Copyright © 2014 Elsevier Ltd. All rights reserved.

Has Work Replaced Home as a Haven? Re-examining Arlie Hochschild's Time Bind Proposition with Objective Stress Data

PubMed Central

Damaske, Sarah; Smyth, Joshua M.; Zawadzki, Matthew J.

2014-01-01

Using innovative data with objective and subjective measures of stress collected from 122 employed men and women, this paper tests the thesis of the Time Bind by asking whether people report lower stress levels at work than at home. The study finds consistent support for the Time Bind hypothesis when examining objective stress data: when participants were at work they had lower values of the stress hormone cortisol than when they were at home. Two variables moderated this association – income and children at home – such that the work as haven effect was stronger for those with lower incomes and no children living at home. Participants also, however, consistently reported higher subjective stress levels on work days than on non-work days, which is in direct contrast to the Time Bind hypothesis. Although our overall findings support Hochschild's hypothesis that stress levels are lower at work, it appears that combining work and home increases people's subjective experience of daily stress. PMID:24869785

The Neighborhood Social Environment and Objective Measures of Sleep in the Multi-Ethnic Study of Atherosclerosis.

PubMed

Johnson, Dayna A; Simonelli, Guido; Moore, Kari; Billings, Martha; Mujahid, Mahasin S; Rueschman, Michael; Kawachi, Ichiro; Redline, Susan; Diez Roux, Ana V; Patel, Sanjay R

2017-01-01

To investigate cross-sectional associations of neighborhood social environment (social cohesion, safety) with objective measures of sleep duration, timing, and disturbances. A racially/ethnically diverse population of men and women (N = 1949) aged 54 to 93 years participating in the Multi-Ethnic Study of Atherosclerosis Sleep and Neighborhood Ancillary studies. Participants underwent 1-week actigraphy between 2010 and 2013. Measures of sleep duration, timing, and disruption were averaged over all days. Neighborhood characteristics were assessed via questionnaires administered to participants and an independent sample within the same neighborhood and aggregated at the neighborhood (census tract, N = 783) level using empirical Bayes estimation. Multilevel linear regression models were used to assess the association between the neighborhood social environment and each sleep outcome. Neighborhood social environment characterized by higher levels of social cohesion and safety were associated with longer sleep duration and earlier sleep midpoint. Each 1 standard deviation higher neighborhood social environment score was associated with 6.1 minutes longer [95% confidence interval (CI): 2.0, 10.2] sleep duration and 6.4 minutes earlier (CI: 2.2, 10.6) sleep midpoint after adjustment for age, sex, race, socioeconomic status, and marital status. These associations persisted after adjustment for other risk factors. Neighborhood social factors were not associated with sleep efficiency or sleep fragmentation index. A more favorable neighborhood social environment is associated with longer objectively measured sleep duration and earlier sleep timing. Intervening on the neighborhood environment may improve sleep and subsequent health outcomes. © Sleep Research Society 2017. Published by Oxford University Press on behalf of the Sleep Research Society. All rights reserved. For permissions, please e-mail journals.permissions@oup.com.

TMS effects on subjective and objective measures of vision: stimulation intensity and pre- versus post-stimulus masking.

PubMed

de Graaf, Tom A; Cornelsen, Sonja; Jacobs, Christianne; Sack, Alexander T

2011-12-01

Transcranial magnetic stimulation (TMS) can be used to mask visual stimuli, disrupting visual task performance or preventing visual awareness. While TMS masking studies generally fix stimulation intensity, we hypothesized that varying the intensity of TMS pulses in a masking paradigm might inform several ongoing debates concerning TMS disruption of vision as measured subjectively versus objectively, and pre-stimulus (forward) versus post-stimulus (backward) TMS masking. We here show that both pre-stimulus TMS pulses and post-stimulus TMS pulses could strongly mask visual stimuli. We found no dissociations between TMS effects on the subjective and objective measures of vision for any masking window or intensity, ruling out the option that TMS intensity levels determine whether dissociations between subjective and objective vision are obtained. For the post-stimulus time window particularly, we suggest that these data provide new constraints for (e.g. recurrent) models of vision and visual awareness. Finally, our data are in line with the idea that pre-stimulus masking operates differently from conventional post-stimulus masking. Copyright © 2011 Elsevier Inc. All rights reserved.

Full-field 3D shape measurement of specular object having discontinuous surfaces

NASA Astrophysics Data System (ADS)

Zhang, Zonghua; Huang, Shujun; Gao, Nan; Gao, Feng; Jiang, Xiangqian

2017-06-01

This paper presents a novel Phase Measuring Deflectometry (PMD) method to measure specular objects having discontinuous surfaces. A mathematical model is established to directly relate the absolute phase and depth, instead of the phase and gradient. Based on the model, a hardware measuring system has been set up, which consists of a precise translating stage, a projector, a diffuser and a camera. The stage locates the projector and the diffuser together to a known position during measurement. By using the model-based and machine vision methods, system calibration is accomplished to provide the required parameters and conditions. The verification tests are given to evaluate the effectiveness of the developed system. 3D (Three-Dimensional) shapes of a concave mirror and a monolithic multi-mirror array having multiple specular surfaces have been measured. Experimental results show that the proposed method can obtain 3D shape of specular objects having discontinuous surfaces effectively

Mismatch between perceived and objectively measured environmental obesogenic features in European neighbourhoods.

PubMed

Roda, C; Charreire, H; Feuillet, T; Mackenbach, J D; Compernolle, S; Glonti, K; Ben Rebah, M; Bárdos, H; Rutter, H; McKee, M; De Bourdeaudhuij, I; Brug, J; Lakerveld, J; Oppert, J-M

2016-01-01

Findings from research on the association between the built environment and obesity remain equivocal but may be partly explained by differences in approaches used to characterize the built environment. Findings obtained using subjective measures may differ substantially from those measured objectively. We investigated the agreement between perceived and objectively measured obesogenic environmental features to assess (1) the extent of agreement between individual perceptions and observable characteristics of the environment and (2) the agreement between aggregated perceptions and observable characteristics, and whether this varied by type of characteristic, region or neighbourhood. Cross-sectional data from the SPOTLIGHT project (n = 6037 participants from 60 neighbourhoods in five European urban regions) were used. Residents' perceptions were self-reported, and objectively measured environmental features were obtained by a virtual audit using Google Street View. Percent agreement and Kappa statistics were calculated. The mismatch was quantified at neighbourhood level by a distance metric derived from a factor map. The extent to which the mismatch metric varied by region and neighbourhood was examined using linear regression models. Overall, agreement was moderate (agreement < 82%, kappa < 0.3) and varied by obesogenic environmental feature, region and neighbourhood. Highest agreement was found for food outlets and outdoor recreational facilities, and lowest agreement was obtained for aesthetics. In general, a better match was observed in high-residential density neighbourhoods characterized by a high density of food outlets and recreational facilities. Future studies should combine perceived and objectively measured built environment qualities to better understand the potential impact of the built environment on health, particularly in low residential density neighbourhoods. © 2016 World Obesity.

Persistent Symptoms and Objectively Measured Balance Performance Among OEF/OIF Veterans With Remote Mild Traumatic Brain Injury.

PubMed

Hebert, Jeffrey R; Forster, Jeri E; Stearns-Yoder, Kelly A; Penzenik, Molly E; Brenner, Lisa A

2018-01-30

To investigate linear relationships between dizziness, fatigue, and depression and posttraumatic stress disorder (PTSD) and objectively measured balance performance in Veterans with remote mild traumatic brain injury (mTBI). Academic laboratory; Veterans Affairs Medical Center. Thirty Veterans (28 men) who served in Iraq/Afghanistan and whose most recent mTBI was sustained more than 6 months prior to enrollment. Cross-sectional, observational trial. The Computerized Dynamic Posturography-Sensory Organization Test (CDP-SOT) and the Community Balance and Mobility (CB&M) scale measured balance. Dizziness (Dizziness Handicap Inventory), fatigue (Modified Fatigue Impact Scale), depression-related symptoms (Beck Depression Inventory-II), and PTSD-related symptoms (PTSD Checklist 5) were also measured. Objectively measured balance, CDP-SOT composite, was impaired (mean score of 67.9). CDP-SOT scores correlated with dizziness (r = -0.53; P = .002), fatigue (r = -0.38; P = .03), depression (r = -0.55; P = .001), and PTSD symptoms (r = -0.53; P = .002). Dizziness, time since most recent mTBI, and PTSD symptoms and depression combined explained significant variability in CDP-SOT scores (R = 0.46; P = .003), as did fatigue depression and PTSD symptoms (R = 0.33; P = .01). Impaired balance was identified among the cohort. Findings suggest that dizziness, fatigue, depression and PTSD, and time since most recent mTBI may influence balance performance. Additional research is needed to identify the potentially interrelated natural histories of these co-occurring symptoms.

Empirical Analysis of the Subjective Impressions and Objective Measures of Domain Scientists’ Analytical Judgment Using Visualizations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dasgupta, Aritra; Burrows, Susannah M.; Han, Kyungsik

Scientists working in a particular domain often adhere to conventional data analysis and presentation methods and this leads to familiarity with these methods over time. But does high familiarity always lead to better analytical judgment? This question is especially relevant when visualizations are used in scientific tasks, as there can be discrepancies between visualization best practices and domain conventions. However, there is little empirical evidence of the relationships between scientists’ subjective impressions about familiar and unfamiliar visualizations and objective measures of their effect on scientific judgment. To address this gap and to study these factors, we focus on the climatemore » science domain, specifically on visualizations used for comparison of model performance. We present a comprehensive user study with 47 climate scientists where we explored the following factors: i) relationships between scientists’ familiarity, their perceived levels of com- fort, confidence, accuracy, and objective measures of accuracy, and ii) relationships among domain experience, visualization familiarity, and post-study preference.« less

Sensors for Using Times of Flight to Measure Flow Velocities

NASA Technical Reports Server (NTRS)

Fralick, Gutave; Wrbanek, John D.; Hwang, Danny; Turso, James

2006-01-01

Thin-film sensors for measuring flow velocities in terms of times of flight are undergoing development. These sensors are very small and can be mounted flush with surfaces of airfoils, ducts, and other objects along which one might need to measure flows. Alternatively or in addition, these sensors can be mounted on small struts protruding from such surfaces for acquiring velocity measurements at various distances from the surfaces for the purpose of obtaining boundary-layer flow-velocity profiles. These sensors are related to, but not the same as, hot-wire anemometers. Each sensor includes a thin-film, electrically conductive loop, along which an electric current is made to flow to heat the loop to a temperature above that of the surrounding fluid. Instantaneous voltage fluctuations in segments of the loop are measured by means of electrical taps placed at intervals along the loop. These voltage fluctuations are caused by local fluctuations in electrical resistance that are, in turn, caused by local temperature fluctuations that are, in turn, caused by fluctuations in flow-induced cooling and, hence, in flow velocity. The differential voltage as a function of time, measured at each pair of taps, is subjected to cross-correlation processing with the corresponding quantities measured at other pairs of taps at different locations on the loop. The cross-correlations yield the times taken by elements of fluid to travel between the pairs of taps. Then the component of velocity along the line between any two pairs of taps is calculated simply as the distance between the pairs of taps divided by the travel time. Unlike in the case of hot-wire anemometers, there is no need to obtain calibration data on voltage fluctuations versus velocity fluctuations because, at least in principle, the correlation times are independent of the calibration data.

Imbalance: Objective measures versus subjective self-report in clinical practice.

PubMed

Chiarovano, Elodie; Wang, Wei; Reynolds, Pam; MacDougall, Hamish G

2018-01-01

Dizziness and imbalance are very common complaints in clinical practice. One of the challenges is to evaluate the 'real' risk of falls. Two tools are available: the patient's self-report and the measure of the patient's balance. We evaluated the relationship between these methods using the Dizziness Handicap Inventory (DHI) and measures of balance while visual inputs are perturbed with Virtual Reality (VR). 90 consecutive patients underwent the DHI questionnaire and the balance test. The DHI questionnaire was used to measure the subject's perception of handicap associated with dizziness. The balance test measured the postural sway in several visual conditions: eyes open, eyes closed, and with an unpredictable visual perturbation using VR at several amplitudes of movement. No correlation was found between the DHI score and the balance measurement. The visual perturbations allow us to characterize patients into three groups: one group with a high DHI score who did not fall on the balance test (5.5%), one group with a low DHI score who failed eyes closed on a compliant surface (9.0%), and one group of the remaining patients (85.5%). The correlation between the DHI score and the balance performance became significant on the remaining group of patients. Both subjective self-report and objective measure are important to characterize a patient. The use of VR visual perturbations allowed us to define three important groups of patients. VR visual perturbations provided additional information that helps explain the lack of correlation between DHI and objective test results. Copyright © 2017 Elsevier B.V. All rights reserved.

Timing, timing, timing: Fast decoding of object information from intracranial field potentials in human visual cortex

PubMed Central

Liu, Hesheng; Agam, Yigal; Madsen, Joseph R.; Kreiman, Gabriel

2010-01-01

Summary The difficulty of visual recognition stems from the need to achieve high selectivity while maintaining robustness to object transformations within hundreds of milliseconds. Theories of visual recognition differ in whether the neuronal circuits invoke recurrent feedback connections or not. The timing of neurophysiological responses in visual cortex plays a key role in distinguishing between bottom-up and top-down theories. Here we quantified at millisecond resolution the amount of visual information conveyed by intracranial field potentials from 912 electrodes in 11 human subjects. We could decode object category information from human visual cortex in single trials as early as 100 ms post-stimulus. Decoding performance was robust to depth rotation and scale changes. The results suggest that physiological activity in the temporal lobe can account for key properties of visual recognition. The fast decoding in single trials is compatible with feed-forward theories and provides strong constraints for computational models of human vision. PMID:19409272

Comparison of self-report and objective measures of driving behavior and road safety: A systematic review.

PubMed

Kaye, Sherrie-Anne; Lewis, Ioni; Freeman, James

2018-06-01

This research systematically reviewed the existing literature in regards to studies which have used both self-report and objective measures of driving behavior. The objective of the current review was to evaluate disparities or similarities between self-report and objective measures of driving behavior. Searches were undertaken in the following electronic databases, PsycINFO, PubMed, and Scopus, for peer-reviewed full-text articles that (1) focused on road safety, and (2) compared both subjective and objective measures of driving performance or driver safety. A total of 22,728 articles were identified, with 19 articles, comprising 20 studies, included as part of the review. The research reported herein suggested that for some behaviors (e.g., driving in stressful situations) there were similarities between self-report and objective measures while for other behaviors (e.g., sleepiness and vigilance states) there were differences between these measurement techniques. In addition, findings from some studies suggested that in-vehicle devices may be a valid measurement tool to assess driving exposure in older drivers. Further research is needed to examine the correspondence between self-report and objective measures of driving behavior. In particular, there is a need to increase the number of studies which compare "like with like" as it is difficult to draw comparisons when there are variations in measurement tools used. Incorporating a range of objective and self-report measurements tools in research would help to ensure that the methods used offer the most reliable measures of assessing on-road behaviors. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

Evaluating the results of stress urinary incontinence surgery with objective and subjective outcome measures.

PubMed

Diez-Itza, I; Espuña-Pons, M

2014-09-01

To assess the outcomes of stress urinary incontinence (SUI) surgery using objective and subjective measures in women with pure SUI and mixed urinary incontinence (MUI). The degree of correlation between the different outcome measures was also evaluated for both groups. A multicentre prospective cohort study of women who underwent surgery for SUI. A standardized cough stress test was used as the objective outcome measure, and specific items of the Epidemiology of Prolapse and Incontinence Questionnaire were used as the subjective outcome measure. The International Consultation on Incontinence Questionnaire-Urinary Incontinence Short Form (ICIQ-UI SF) and the Patient Global Impression of Improvement (PGI-I) questionnaires were used for global assessment. Kappa test was used to measure the degree of correlation between the outcome measures. The participants were categorized into two groups before surgery: pure SUI (n=116) and MUI (n=161). Six months after surgery, the cure rate of the SUI component was high in both groups according to the objective and subjective outcome measures. Global assessment showed lower cure rates. The degree of agreement between objective and subjective outcome measures was moderate (kappa 0.541, p<0.001) for women with pure SUI, and fair (kappa 0.377, p<0.001) for women with MUI. Correlation between the change in ICIQ-UI SF score (pre to post surgery) and the degree of satisfaction (PGI-I) was significant (p<0.01) for both the pure SUI group (0.43) and the MUI group (0.48). Both objective and subjective cure rates are high for women with pure SUI and MUI following SUI surgery in Spain. The degree of agreement between different outcome measures varies. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

2013 AMAOs Guide: Annual Measurable Achievement Objectives (AMAOs). Title III, Part A Accountability System

ERIC Educational Resources Information Center

Texas Education Agency, 2013

2013-01-01

Under Title III of the No Child Left Behind Act of 2001 (NCLB), the Texas Education Agency is required to establish Annual Measurable Achievement Objectives (AMAOs) for the English language acquisition and academic achievement of limited English proficient (LEP) students. This 2013 Guide to Annual Measurable Achievement Objectives provides AMAO…

Motion measurement of acoustically levitated object

NASA Technical Reports Server (NTRS)

Watkins, John L. (Inventor); Barmatz, Martin B. (Inventor)

1993-01-01

A system is described for determining motion of an object that is acoustically positioned in a standing wave field in a chamber. Sonic energy in the chamber is sensed, and variation in the amplitude of the sonic energy is detected, which is caused by linear motion, rotational motion, or drop shape oscillation of the object. Apparatus for detecting object motion can include a microphone coupled to the chamber and a low pass filter connected to the output of the microphone, which passes only frequencies below the frequency of sound produced by a transducer that maintains the acoustic standing wave field. Knowledge about object motion can be useful by itself, can be useful to determine surface tension, viscosity, and other information about the object, and can be useful to determine the pressure and other characteristics of the acoustic field.

Associations of office workers' objectively assessed occupational sitting, standing and stepping time with musculoskeletal symptoms.

PubMed

Coenen, Pieter; Healy, Genevieve N; Winkler, Elisabeth A H; Dunstan, David W; Owen, Neville; Moodie, Marj; LaMontagne, Anthony D; Eakin, Elizabeth A; O'Sullivan, Peter B; Straker, Leon M

2018-04-22

We examined the association of musculoskeletal symptoms (MSS) with workplace sitting, standing and stepping time, as well as sitting and standing time accumulation (i.e. usual bout duration of these activities), measured objectively with the activPAL3 monitor. Using baseline data from the Stand Up Victoria trial (216 office workers, 14 workplaces), cross-sectional associations of occupational activities with self-reported MSS (low-back, upper and lower extremity symptoms in the last three months) were examined using probit regression, correcting for clustering and adjusting for confounders. Sitting bout duration was significantly (p < 0.05) associated, non-linearly, with MSS, such that those in the middle tertile displayed the highest prevalence of upper extremity symptoms. Other associations were non-significant but sometimes involved large differences in symptom prevalence (e.g. 38%) by activity. Though causation is unclear, these non-linear associations suggest that sitting and its alternatives (i.e. standing and stepping) interact with MSS and this should be considered when designing safe work systems. Practitioner summary: We studied associations of objectively assessed occupational activities with musculoskeletal symptoms in office workers. Workers who accumulated longer sitting bouts reported fewer upper extremity symptoms. Total activity duration was not significantly associated with musculoskeletal symptoms. We underline the importance of considering total volumes and patterns of activity time in musculoskeletal research.

Integration across Time Determines Path Deviation Discrimination for Moving Objects

PubMed Central

Whitaker, David; Levi, Dennis M.; Kennedy, Graeme J.

2008-01-01

Background Human vision is vital in determining our interaction with the outside world. In this study we characterize our ability to judge changes in the direction of motion of objects–a common task which can allow us either to intercept moving objects, or else avoid them if they pose a threat. Methodology/Principal Findings Observers were presented with objects which moved across a computer monitor on a linear path until the midline, at which point they changed their direction of motion, and observers were required to judge the direction of change. In keeping with the variety of objects we encounter in the real world, we varied characteristics of the moving stimuli such as velocity, extent of motion path and the object size. Furthermore, we compared performance for moving objects with the ability of observers to detect a deviation in a line which formed the static trace of the motion path, since it has been suggested that a form of static memory trace may form the basis for these types of judgment. The static line judgments were well described by a ‘scale invariant’ model in which any two stimuli which possess the same two-dimensional geometry (length/width) result in the same level of performance. Performance for the moving objects was entirely different. Irrespective of the path length, object size or velocity of motion, path deviation thresholds depended simply upon the duration of the motion path in seconds. Conclusions/Significance Human vision has long been known to integrate information across space in order to solve spatial tasks such as judgment of orientation or position. Here we demonstrate an intriguing mechanism which integrates direction information across time in order to optimize the judgment of path deviation for moving objects. PMID:18414653

Application of spatial time domain reflectometry measurements in heterogeneous, rocky substrates

NASA Astrophysics Data System (ADS)

Gonzales, C.; Scheuermann, A.; Arnold, S.; Baumgartl, T.

2016-10-01

Measurement of soil moisture across depths using sensors is currently limited to point measurements or remote sensing technologies. Point measurements have limitations on spatial resolution, while the latter, although covering large areas may not represent real-time hydrologic processes, especially near the surface. The objective of the study was to determine the efficacy of elongated soil moisture probes—spatial time domain reflectometry (STDR)—and to describe transient soil moisture dynamics of unconsolidated mine waste rock materials. The probes were calibrated under controlled conditions in the glasshouse. Transient soil moisture content was measured using the gravimetric method and STDR. Volumetric soil moisture content derived from weighing was compared with values generated from a numerical model simulating the drying process. A calibration function was generated and applied to STDR field data sets. The use of elongated probes effectively assists in the real-time determination of the spatial distribution of soil moisture. It also allows hydrologic processes to be uncovered in the unsaturated zone, especially for water balance calculations that are commonly based on point measurements. The elongated soil moisture probes can potentially describe transient substrate processes and delineate heterogeneity in terms of the pore size distribution in a seasonally wet but otherwise arid environment.

The time course of activation of object shape and shape+colour representations during memory retrieval.

PubMed

Lloyd-Jones, Toby J; Roberts, Mark V; Leek, E Charles; Fouquet, Nathalie C; Truchanowicz, Ewa G

2012-01-01

Little is known about the timing of activating memory for objects and their associated perceptual properties, such as colour, and yet this is important for theories of human cognition. We investigated the time course associated with early cognitive processes related to the activation of object shape and object shape+colour representations respectively, during memory retrieval as assessed by repetition priming in an event-related potential (ERP) study. The main findings were as follows: (1) we identified a unique early modulation of mean ERP amplitude during the N1 that was associated with the activation of object shape independently of colour; (2) we also found a subsequent early P2 modulation of mean amplitude over the same electrode clusters associated with the activation of object shape+colour representations; (3) these findings were apparent across both familiar (i.e., correctly coloured - yellow banana) and novel (i.e., incorrectly coloured - blue strawberry) objects; and (4) neither of the modulations of mean ERP amplitude were evident during the P3. Together the findings delineate the timing of object shape and colour memory systems and support the notion that perceptual representations of object shape mediate the retrieval of temporary shape+colour representations for familiar and novel objects.

The Time Course of Activation of Object Shape and Shape+Colour Representations during Memory Retrieval

PubMed Central

Lloyd-Jones, Toby J.; Roberts, Mark V.; Leek, E. Charles; Fouquet, Nathalie C.; Truchanowicz, Ewa G.

2012-01-01

Little is known about the timing of activating memory for objects and their associated perceptual properties, such as colour, and yet this is important for theories of human cognition. We investigated the time course associated with early cognitive processes related to the activation of object shape and object shape+colour representations respectively, during memory retrieval as assessed by repetition priming in an event-related potential (ERP) study. The main findings were as follows: (1) we identified a unique early modulation of mean ERP amplitude during the N1 that was associated with the activation of object shape independently of colour; (2) we also found a subsequent early P2 modulation of mean amplitude over the same electrode clusters associated with the activation of object shape+colour representations; (3) these findings were apparent across both familiar (i.e., correctly coloured – yellow banana) and novel (i.e., incorrectly coloured - blue strawberry) objects; and (4) neither of the modulations of mean ERP amplitude were evident during the P3. Together the findings delineate the timing of object shape and colour memory systems and support the notion that perceptual representations of object shape mediate the retrieval of temporary shape+colour representations for familiar and novel objects. PMID:23155393

Modern Methods of Measuring and Modelling Architectural Objects in the Process of their Valorisation

NASA Astrophysics Data System (ADS)

Zagroba, Marek

2017-10-01

As well as being a cutting-edge technology, laser scanning is still developing rapidly. Laser scanners have an almost unlimited range of use in many disciplines of contemporary engineering, where precision and high quality of tasks performed are of the utmost importance. Among these disciplines, special attention is drawn to architecture and urban space studies that is the fields of science which shape the space and surroundings occupied by people, thus having a direct impact on people’s lives. It is more complicated to take measurements with a laser scanner than with traditional methods, where laser target markers or a measuring tape are used. A specific procedure must be followed when measurements are taken with a laser scanner, and the aim is to obtain three-dimensional data about a building situated in a given space. Accuracy, low time consumption, safety and non-invasiveness are the primary advantages of this technology used in the civil engineering practice, when handling both historic and modern architecture. Using a laser scanner is especially important when taking measurements of vast engineering constructions, where an application of traditional techniques would be much more difficult and would require higher time and labour inputs, for example because of some less easily accessible nooks and crannies or due to the geometrical complexity of individual components of a building structure. In this article, the author undertakes the problem of measuring and modelling architectural objects in the process of their valorisation, i.e. the enhancement of their functional, usable, spatial and aesthetic values. Above all, the laser scanning method, by generating results as a point cloud, enables the user to obtain a very detailed, three-dimensional computer image of measured objects, and to make series of analyses and expert investigations, e.g. of the technical condition (deformation of construction elements) as well as the spatial management of the surrounding

Changes in objective acoustic measurements and subjective voice complaints in call center customer-service advisors during one working day.

PubMed

Lehto, Laura; Laaksonen, Laura; Vilkman, Erkki; Alku, Paavo

2008-03-01

The aim of this study was to investigate how different acoustic parameters, extracted both from speech pressure waveforms and glottal flows, can be used in measuring vocal loading in modern working environments and how these parameters reflect the possible changes in the vocal function during a working day. In addition, correlations between objective acoustic parameters and subjective voice symptoms were addressed. The subjects were 24 female and 8 male customer-service advisors, who mainly use telephone during their working hours. Speech samples were recorded from continuous speech four times during a working day and voice symptom questionnaires were completed simultaneously. Among the various objective parameters, only F0 resulted in a statistically significant increase for both genders. No correlations between the changes in objective and subjective parameters appeared. However, the results encourage researchers within the field of occupational voice use to apply versatile measurement techniques in studying occupational voice loading.

Ability of College Students to Simulate ADHD on Objective Measures of Attention

ERIC Educational Resources Information Center

Booksh, Randee Lee; Pella, Russell D.; Singh, Ashvind N.; Gouvier, William Drew

2010-01-01

Objective: The authors examined the ability of college students to simulate ADHD symptoms on objective and self-report measures and the relationship between knowledge of ADHD and ability to simulate ADHD. Method: Undergraduate students were assigned to a control or a simulated ADHD malingering condition and compared with a clinical AD/HD group.…

Detection and Purging of Specular Reflective and Transparent Object Influences in 3d Range Measurements

NASA Astrophysics Data System (ADS)

Koch, R.; May, S.; Nüchter, A.

2017-02-01

3D laser scanners are favoured sensors for mapping in mobile service robotics at indoor and outdoor applications, since they deliver precise measurements at a wide scanning range. The resulting maps are detailed since they have a high resolution. Based on these maps robots navigate through rough terrain, fulfil advanced manipulation, and inspection tasks. In case of specular reflective and transparent objects, e.g., mirrors, windows, shiny metals, the laser measurements get corrupted. Based on the type of object and the incident angle of the incoming laser beam there are three results possible: a measurement point on the object plane, a measurement behind the object plane, and a measurement of a reflected object. It is important to detect such situations to be able to handle these corrupted points. This paper describes why it is difficult to distinguish between specular reflective and transparent surfaces. It presents a 3DReflection- Pre-Filter Approach to identify specular reflective and transparent objects in point clouds of a multi-echo laser scanner. Furthermore, it filters point clouds from influences of such objects and extract the object properties for further investigations. Based on an Iterative-Closest-Point-algorithm reflective objects are identified. Object surfaces and points behind surfaces are masked according to their location. Finally, the processed point cloud is forwarded to a mapping module. Furthermore, the object surface corners and the type of the surface is broadcasted. Four experiments demonstrate the usability of the 3D-Reflection-Pre-Filter. The first experiment was made in a empty room containing a mirror, the second experiment was made in a stairway containing a glass door, the third experiment was made in a empty room containing two mirrors, the fourth experiment was made in an office room containing a mirror. This paper demonstrate that for single scans the detection of specular reflective and transparent objects in 3D is possible. It

Fatigue and Sleep Among Employees With Prospective Increase in Work Time Control: A 1-Year Observational Study With Objective Assessment.

PubMed

Kubo, Tomohide; Takahashi, Masaya; Liu, Xinxin; Ikeda, Hiroki; Togo, Fumiharu; Shimazu, Akihito; Tanaka, Katsutoshi; Kamata, Naoki; Kubo, Yoshiko; Uesugi, Junko

2016-11-01

This observational study aimed to determine how 1-year changes in work time control (WTC) have an impact upon objectively measured fatigue and sleep among employees. Thirty-nine employees were divided into two groups according to whether or not their WTC increased from baseline to 1 year later. Psychomotor vigilance task (PVT) and wrist actigraphy were used to objectively measure fatigue and sleep, respectively. Self-reported outcomes were also measured. The increased WTC group showed gradual improvements in PVT performance and sleep quality over the course of the follow-up period compared with the not-increased WTC group. Between-group differences were statistically significant for PVT lapses and tended to be significant for PVT speed after 1 year. A progressive increase in WTC could play a crucial role in reducing fatigue and promoting sleep among employees.

Real-time reliability measure-driven multi-hypothesis tracking using 2D and 3D features

NASA Astrophysics Data System (ADS)

Zúñiga, Marcos D.; Brémond, François; Thonnat, Monique

2011-12-01

We propose a new multi-target tracking approach, which is able to reliably track multiple objects even with poor segmentation results due to noisy environments. The approach takes advantage of a new dual object model combining 2D and 3D features through reliability measures. In order to obtain these 3D features, a new classifier associates an object class label to each moving region (e.g. person, vehicle), a parallelepiped model and visual reliability measures of its attributes. These reliability measures allow to properly weight the contribution of noisy, erroneous or false data in order to better maintain the integrity of the object dynamics model. Then, a new multi-target tracking algorithm uses these object descriptions to generate tracking hypotheses about the objects moving in the scene. This tracking approach is able to manage many-to-many visual target correspondences. For achieving this characteristic, the algorithm takes advantage of 3D models for merging dissociated visual evidence (moving regions) potentially corresponding to the same real object, according to previously obtained information. The tracking approach has been validated using video surveillance benchmarks publicly accessible. The obtained performance is real time and the results are competitive compared with other tracking algorithms, with minimal (or null) reconfiguration effort between different videos.

Ultrasonic Measurement of Strain Distribution Inside Object Cyclically Compressed by Dual Acoustic Radiation Force

NASA Astrophysics Data System (ADS)

Odagiri, Yoshitaka; Hasegawa, Hideyuki; Kanai, Hiroshi

2008-05-01

One possible way to evaluate acupuncture therapy quantitatively is to measure the change in the elastic property of muscle after application of the therapy. Many studies have been conducted to measure mechanical properties of tissues using ultrasound-induced acoustic radiation force. To assess mechanical properties, strain must be generated in an object. However, a single radiation force is not effective because it mainly generates translational motion when the object is much harder than the surrounding medium. In this study, two cyclic radiation forces are simultaneously applied to a muscle phantom from two opposite horizontal directions so that the object is cyclically compressed in the horizontal direction. By the horizontal compression, the object is expanded vertically based on its incompressibility. The resultant vertical displacement is measured using another ultrasound pulse. Two ultrasonic transducers for actuation were both driven by the sum of two continuous sinusoidal signals at two slightly different frequencies [1 MHz and (1 M + 5) Hz]. The displacement of several micrometers in amplitude, which fluctuated at 5 Hz, was measured by the ultrasonic phased tracking method. Increase in thickness inside the object was observed just when acoustic radiation forces increased. Such changes in thickness correspond to vertical expansion due to horizontal compression.

Real-time visual tracking of less textured three-dimensional objects on mobile platforms

NASA Astrophysics Data System (ADS)

Seo, Byung-Kuk; Park, Jungsik; Park, Hanhoon; Park, Jong-Il

2012-12-01

Natural feature-based approaches are still challenging for mobile applications (e.g., mobile augmented reality), because they are feasible only in limited environments such as highly textured and planar scenes/objects, and they need powerful mobile hardware for fast and reliable tracking. In many cases where conventional approaches are not effective, three-dimensional (3-D) knowledge of target scenes would be beneficial. We present a well-established framework for real-time visual tracking of less textured 3-D objects on mobile platforms. Our framework is based on model-based tracking that efficiently exploits partially known 3-D scene knowledge such as object models and a background's distinctive geometric or photometric knowledge. Moreover, we elaborate on implementation in order to make it suitable for real-time vision processing on mobile hardware. The performance of the framework is tested and evaluated on recent commercially available smartphones, and its feasibility is shown by real-time demonstrations.

To measure the chemical composition of a Near Earth Object

NASA Astrophysics Data System (ADS)

Gasnault, 0.; Ball, A.; Biele, J.; D'Uston, C.; Forni, O.; Klingelhofer, G.; Maurice, S.; Ulamec, S.

Introduction. Scenarios for a Near Earth Object (NEO) rendezvous mission were discussed recently in Europe. Such a mission would address scientific questions about the initial conditions and evolutionary history of the solar nebula, as well as mitigation considerations to prevent impact with the Earth. In our opinion the measurement of the elemental composition and the distribution of volatiles in the shallow sub-surface are two of the key observations to be conducted, either from an orbiter or a lander. These measurements are also valuable for documentation (landing site candidates and sample context). This report is limited to the chemical composition, but we assume that remote and/or in-situ observations of physical characteristics, interior, morphology, mineralogy, and organic compounds will also be made as essential complements to achieve the mission scientific objectives. Scientific Interest. The analysis of the bulk composition addresses three fundamental aspects of the scientific mission: (1) the formation of the asteroid or the comet; (2) the evolution of the object; (3) the relation between the parent body and collected meteorites on Earth. Classification of an asteroid/comet can be based on its global composition (abundances of Mg, Si, Fe, Al, Ca, etc. along with its mineralogy), which bears the signature of the feeding zone where it formed. For example the K/U and K/Th ratios seem to increase with distance from the Sun (decreasing temperature). The hydrogen content is another measurable to study the distribution of volatiles in the Solar System. The surface composition is also the result of the degree of evolution of the object and of the interactions with its environment. Building a compositional map of the major elements is necessary to identify and characterize the processes that influenced the asteroid along its history. Finally, knowing the chemical composition will obviously help to relate the parent 1 body to meteorites. Ideally the measurement

[Evaluation and Optimization of Microvascular Arterial Anastomoses by Transit Time Flow Measurement].

PubMed

Herberhold, S; Röttker, J; Bartmann, D; Solbach, A; Keiner, S; Welz, A; Bootz, F; Laffers, W

2016-03-01

INDRODUCTION: The regular application of transit time flow measurement in microvascular anastomoses during heart surgery has lead to improvements of the outcome of coronary artery bypass grafts. Our study was meant to discover whether this measurement method was also applicable for evaluation and optimization of microvascular arterial anastomoses of radial forearm flaps. In this prospective examination a combining ultrasound imaging and transit time flow measurement device (VeriQ, MediStim) was used during surgery to assess anastomotic quality of 15 radial forearm flaps. Pulsatility index (PI) and mean blood flow were measured immediately after opening the arterial anastomosis as well as 15 min afterwards. Furthermore, application time and description of handling were recorded seperately for every assessment. Mean blood flow immediately after opening the anastomosis and 15 min later were 3.9 and 3.4 ml/min resepectively showing no statistically significant difference (p=0.96). There was no significance in the increase of pulsatility index from 22.1 to 27.2 (p=0.09) during the same time range, either. Due to measurement results showing atypical pulse curves in 2 cases decision for surgical revision of the anastomoses was made. All forearm flaps showed good vascularisation during follow-up. Time for device set up, probe placement and measurements was about 20 min. Handling was described to be uncomplicated without exception. There were no noteworthy problems. Transit time flow measurement contributes to the improvement of anastomotic quality and therefore to the overall outcome of radial forearm flaps. The examined measurement method provides objective results and is useful for documentation purposes. © Georg Thieme Verlag KG Stuttgart · New York.

Sleep Restriction Therapy for Insomnia is Associated with Reduced Objective Total Sleep Time, Increased Daytime Somnolence, and Objectively Impaired Vigilance: Implications for the Clinical Management of Insomnia Disorder

PubMed Central

Kyle, Simon D.; Miller, Christopher B.; Rogers, Zoe; Siriwardena, A. Niroshan; MacMahon, Kenneth M.; Espie, Colin A.

2014-01-01

Study Objectives: To investigate whether sleep restriction therapy (SRT) is associated with reduced objective total sleep time (TST), increased daytime somnolence, and impaired vigilance. Design: Within-subject, noncontrolled treatment investigation. Setting: Sleep research laboratory. Participants: Sixteen patients [10 female, mean age = 47.1 (10.8) y] with well-defined psychophysiological insomnia (PI), reporting TST ≤ 6 h. Interventions: Patients were treated with single-component SRT over a 4-w protocol, sleeping in the laboratory for 2 nights prior to treatment initiation and for 3 nights (SRT night 1, 8, 22) during the acute interventional phase. The psychomotor vigilance task (PVT) was completed at seven defined time points [day 0 (baseline), day 1,7,8,21,22 (acute treatment) and day 84 (3 mo)]. The Epworth Sleepiness Scale (ESS) was completed at baseline, w 1-4, and 3 mo. Measurement and results: Subjective sleep outcomes and global insomnia severity significantly improved before and after SRT. There was, however, a robust decrease in PSG-defined TST during acute implementation of SRT, by an average of 91 min on night 1, 78 min on night 8, and 69 min on night 22, relative to baseline (P < 0.001; effect size range = 1.60-1.80). During SRT, PVT lapses were significantly increased from baseline (at three of five assessment points, all P < 0.05; effect size range = 0.69-0.78), returning to baseline levels by 3 mo (P = 0.43). A similar pattern was observed for RT, with RTs slowing during acute treatment (at four of five assessment points, all P < 0.05; effect size range = 0.57-0.89) and returning to pretreatment levels at 3 mo (P = 0.78). ESS scores were increased at w 1, 2, and 3 (relative to baseline; all P < 0.05); by 3 mo, sleepiness had returned to baseline (normative) levels (P = 0.65). Conclusion: For the first time we show that acute sleep restriction therapy is associated with reduced objective total sleep time, increased daytime sleepiness, and

Real-time thickness measurement of MCC ablator material

NASA Technical Reports Server (NTRS)

Greenway, R. Bryan, Jr.

1994-01-01

One of the most favorable characteristics of the Space Shuttle Program is the reusability of two of its primary components: the orbiter itself and the Solid Rocket Boosters (SRB). The SRB's provide the primary source of propulsion for the Space Shuttle during take-off after which they are recovered for refurbishment and reuse. During refurbishment, the SRB's are stripped of all remaining ablative (heat resistant) coating. A new layer is applied to the appropriate sections (nose cone, frustum, forward skirt, and aft skirt). It is the process of applying the ablative coating which provided the impetus for this project. The thickness of this protective layer is considered to be of primary importance to the level of thermal protection provided. The objectives of this effort are to investigate possible techniques for measuring the thickness of MCC, and if possible to test the specific capabilities of those considered good candidates for implementation. The system would be able to take measurements in real-time as close to the spray gun as possible. This will allow the information to be used in the control of the process without an inordinate time delay between a measurement and its appropriate response. The thickness of the deposited material is to be measured with less than 0.100 in if uncertainty. This is the defined tolerance window for the ablator thickness. Finally, it must operate within the confines of the chamber which encloses the turntable, robot, and spray system, and therefore is required to be insensitive to, or at least maintainable in, that environment.

A method for real-time visual stimulus selection in the study of cortical object perception.

PubMed

Leeds, Daniel D; Tarr, Michael J

2016-06-01

The properties utilized by visual object perception in the mid- and high-level ventral visual pathway are poorly understood. To better establish and explore possible models of these properties, we adopt a data-driven approach in which we repeatedly interrogate neural units using functional Magnetic Resonance Imaging (fMRI) to establish each unit's image selectivity. This approach to imaging necessitates a search through a broad space of stimulus properties using a limited number of samples. To more quickly identify the complex visual features underlying human cortical object perception, we implemented a new functional magnetic resonance imaging protocol in which visual stimuli are selected in real-time based on BOLD responses to recently shown images. Two variations of this protocol were developed, one relying on natural object stimuli and a second based on synthetic object stimuli, both embedded in feature spaces based on the complex visual properties of the objects. During fMRI scanning, we continuously controlled stimulus selection in the context of a real-time search through these image spaces in order to maximize neural responses across pre-determined 1cm(3) rain regions. Elsewhere we have reported the patterns of cortical selectivity revealed by this approach (Leeds et al., 2014). In contrast, here our objective is to present more detailed methods and explore the technical and biological factors influencing the behavior of our real-time stimulus search. We observe that: 1) Searches converged more reliably when exploring a more precisely parameterized space of synthetic objects; 2) real-time estimation of cortical responses to stimuli is reasonably consistent; 3) search behavior was acceptably robust to delays in stimulus displays and subject motion effects. Overall, our results indicate that real-time fMRI methods may provide a valuable platform for continuing study of localized neural selectivity, both for visual object representation and beyond. Copyright �

A method for real-time visual stimulus selection in the study of cortical object perception

PubMed Central

Leeds, Daniel D.; Tarr, Michael J.

2016-01-01

The properties utilized by visual object perception in the mid- and high-level ventral visual pathway are poorly understood. To better establish and explore possible models of these properties, we adopt a data-driven approach in which we repeatedly interrogate neural units using functional Magnetic Resonance Imaging (fMRI) to establish each unit’s image selectivity. This approach to imaging necessitates a search through a broad space of stimulus properties using a limited number of samples. To more quickly identify the complex visual features underlying human cortical object perception, we implemented a new functional magnetic resonance imaging protocol in which visual stimuli are selected in real-time based on BOLD responses to recently shown images. Two variations of this protocol were developed, one relying on natural object stimuli and a second based on synthetic object stimuli, both embedded in feature spaces based on the complex visual properties of the objects. During fMRI scanning, we continuously controlled stimulus selection in the context of a real-time search through these image spaces in order to maximize neural responses across predetermined 1 cm3 brain regions. Elsewhere we have reported the patterns of cortical selectivity revealed by this approach (Leeds 2014). In contrast, here our objective is to present more detailed methods and explore the technical and biological factors influencing the behavior of our real-time stimulus search. We observe that: 1) Searches converged more reliably when exploring a more precisely parameterized space of synthetic objects; 2) Real-time estimation of cortical responses to stimuli are reasonably consistent; 3) Search behavior was acceptably robust to delays in stimulus displays and subject motion effects. Overall, our results indicate that real-time fMRI methods may provide a valuable platform for continuing study of localized neural selectivity, both for visual object representation and beyond. PMID:26973168

Probing optimal measurement configuration for optical scatterometry by the multi-objective genetic algorithm

NASA Astrophysics Data System (ADS)

Chen, Xiuguo; Gu, Honggang; Jiang, Hao; Zhang, Chuanwei; Liu, Shiyuan

2018-04-01

Measurement configuration optimization (MCO) is a ubiquitous and important issue in optical scatterometry, whose aim is to probe the optimal combination of measurement conditions, such as wavelength, incidence angle, azimuthal angle, and/or polarization directions, to achieve a higher measurement precision for a given measuring instrument. In this paper, the MCO problem is investigated and formulated as a multi-objective optimization problem, which is then solved by the multi-objective genetic algorithm (MOGA). The case study on the Mueller matrix scatterometry for the measurement of a Si grating verifies the feasibility of the MOGA in handling the MCO problem in optical scatterometry by making a comparison with the Monte Carlo simulations. Experiments performed at the achieved optimal measurement configuration also show good agreement between the measured and calculated best-fit Mueller matrix spectra. The proposed MCO method based on MOGA is expected to provide a more general and practical means to solve the MCO problem in the state-of-the-art optical scatterometry.

The subjective experience of object recognition: comparing metacognition for object detection and object categorization.

PubMed

Meuwese, Julia D I; van Loon, Anouk M; Lamme, Victor A F; Fahrenfort, Johannes J

2014-05-01

Perceptual decisions seem to be made automatically and almost instantly. Constructing a unitary subjective conscious experience takes more time. For example, when trying to avoid a collision with a car on a foggy road you brake or steer away in a reflex, before realizing you were in a near accident. This subjective aspect of object recognition has been given little attention. We used metacognition (assessed with confidence ratings) to measure subjective experience during object detection and object categorization for degraded and masked objects, while objective performance was matched. Metacognition was equal for degraded and masked objects, but categorization led to higher metacognition than did detection. This effect turned out to be driven by a difference in metacognition for correct rejection trials, which seemed to be caused by an asymmetry of the distractor stimulus: It does not contain object-related information in the detection task, whereas it does contain such information in the categorization task. Strikingly, this asymmetry selectively impacted metacognitive ability when objective performance was matched. This finding reveals a fundamental difference in how humans reflect versus act on information: When matching the amount of information required to perform two tasks at some objective level of accuracy (acting), metacognitive ability (reflecting) is still better in tasks that rely on positive evidence (categorization) than in tasks that rely more strongly on an absence of evidence (detection).

Is direct measurement of time possible?

NASA Astrophysics Data System (ADS)

Reynolds, Thomas

2017-08-01

Is direct measurement of time possible? The answer to this question may depend upon how one understands time. Is time an essential constituent of physical reality? Or is what scientists are talking about when they use the symbol ‘t’ or the word ‘time’ an human cultural construct, as the Chief of the USA NIST Divisions of Time and Frequency and of Quantum Physics has suggested. Few aspects of physics do not reference activity to time, but many discussions within either view of time seem to use one same, largely traditional, language of time. Briefly considering the question of measurement, including from a formal measure-theoretic point of view, clarifies the situation.

Objectively measuring pain using facial expression: is the technology finally ready?

PubMed

Dawes, Thomas Richard; Eden-Green, Ben; Rosten, Claire; Giles, Julian; Governo, Ricardo; Marcelline, Francesca; Nduka, Charles

2018-03-01

Currently, clinicians observe pain-related behaviors and use patient self-report measures in order to determine pain severity. This paper reviews the evidence when facial expression is used as a measure of pain. We review the literature reporting the relevance of facial expression as a diagnostic measure, which facial movements are indicative of pain, and whether such movements can be reliably used to measure pain. We conclude that although the technology for objective pain measurement is not yet ready for use in clinical settings, the potential benefits to patients in improved pain management, combined with the advances being made in sensor technology and artificial intelligence, provide opportunities for research and innovation.

Effect of a grounded object on radon measurement using AlphaGUARD.

PubMed

Ichitsubo, Hirokazu; Yamada, Yuji

2004-07-01

ABSTRACT-: The effects on radon concentration measurement of a grounded object near the opening of a cylindrical ionization chamber were studied using AlphaGUARD. AlphaGUARD comes with a flow measurement adapter that fits on the front of the AlphaGUARD ionization chamber. If the adapter nozzle is grounded, the radon concentration is falsely measured at 0 Bq m. A metal connector for use between the AlphaGUARD and the air duct wall was manufactured in our laboratory. When the connector is grounded, the radon concentration is again falsely measured as 0 Bq m. If the nozzle or connector is ungrounded, the AlphaGUARD measures radon concentration accurately. Health Phys.

AIMBAT: A Python/Matplotlib Tool for Measuring Teleseismic Arrival Times

NASA Astrophysics Data System (ADS)

Lou, X.; van der Lee, S.; Lloyd, S.

2013-12-01

Python is an open-source, platform-independent, and object-oriented scripting language. It became more popular in the seismologist community since the appearance of ObsPy (Beyreuther et al. 2010, Megies et al. 2011), which provides a powerful framework for seismic data access and processing. This study introduces a new Python-based tool named AIMBAT (Automated and Interactive Measurement of Body-wave Arrival Times) for measuring teleseismic body-wave arrival times on large-scale seismic event data (Lou et al. 2013). Compared to ObsPy, AIMBAT is a lighter tool that is more focused on a particular aspect of seismic data processing. It originates from the widely used MCCC (Multi-Channel Cross-Correlation) method developed by VanDecar and Crosson (1990). On top of the original MCCC procedure, AIMBAT is automated in initial phase picking and is interactive in quality control. The core cross-correlation function is implemented in Fortran to boost up performance in addition to Python. The GUI (graphical user interface) of AIMBAT depends on Matplotlib's GUI-neutral widgets and event-handling API. A number of sorting and (de)selecting options are designed to facilitate the quality control of seismograms. By using AIMBAT, both relative and absolute teleseismic body-wave arrival times are measured. AIMBAT significantly improves efficiency and quality of the measurements. User interaction is needed only to pick the target phase arrival and to set a time window on the array stack. The package is easy to install and use, open-source, and is publicly available. Graphical user interface of AIMBAT.

Measuring sleep habits without using a diary: the sleep timing questionnaire

NASA Technical Reports Server (NTRS)

Monk, Timothy H.; Buysse, Daniel J.; Kennedy, Kathy S.; Pods, Jaime M.; DeGrazia, Jean M.; Miewald, Jean M.

2003-01-01

STUDY OBJECTIVES: To develop a single-administration instrument yielding equivalent measures of sleep to those obtained from a formal (2-week) sleep diary. DESIGN & SETTING: A single-administration Sleep riming Questionnaire (STQ) is described (and reproduced in the Appendix). Test-retest reliability was examined in 40 subjects who were given the STQ on two occasions separated by less than 1 year. Convergent validity was measured both by comparing STO-derived measures with objective measures derived from wrist actigraphy (n=23) and by comparing STQ-derived measures with other subjective measures derived from a detailed 2-week sleep diary in two nonoverlapping samples (n=101, 93). Correlations of STQ measures with age and momingness-eveningness (chronotype) were also examined. SUBJECTS: The analyses used sample sizes of 40, 23, 101, and 93 (both genders, overall age range 20y-89y). Most subjects were healthy volunteers; some Study 4 subjects were patients (enrolled in research protocols). RESULTS: Test-retest reliability for the STQ was demonstrated for estimates of bedtime (r = 0.705, p < 0.001) and waketime (r = 0.826, p < 0.001). Convergent validity using wrist actigraphy was demonstrated by correlations of 0.592 (p < 0.005) for bedtime, and of 0.769 (p < 0.001) for waketime. Diary studies indicated STQ bedtime and waketime data to be highly correlated (at about 0.8) with those obtained from a formal 2-week sleep diary. The STQ also provided data on estimated sleep latency and wake after sleep onset (WASO), which correlated reliably (at about 0.7) with average nightly ratings of these variables from a 2-week sleep diary. Mean estimated values of sleep latency and WASO from the two instruments were within 1 minute of each other. ST-derived bedtimes and waketimes correlated with both age and chronotype in the expected direction (older subjects earlier, morning types earlier). CONCLUSION: The STQ may be a reliable valid measure of sleep timing that could provide a

Evaluating Robotic Surgical Skills Performance Under Distractive Environment Using Objective and Subjective Measures.

PubMed

Suh, Irene H; LaGrange, Chad A; Oleynikov, Dmitry; Siu, Ka-Chun

2016-02-01

Distractions are recognized as a significant factor affecting performance in safety critical domains. Although operating rooms are generally full of distractions, the effect of distractions on robot-assisted surgical (RAS) performance is unclear. Our aim was to investigate the effect of distractions on RAS performance using both objective and subjective measures. Fifteen participants performed a knot-tying task using the da Vinci Surgical System and were exposed to 3 distractions: (1) passive distraction entailed listening to noise with a constant heart rate, (2) active distraction included listening to noise and acknowledging a change of random heart rate from 60 to 120 bpm, and (3) interactive distraction consisted of answering math questions. The objective kinematics of the surgical instrument tips were used to evaluate performance. Electromyography (EMG) of the forearm and hand muscles of the participants were collected. The median EMG frequency (EMG(fmed)) and the EMG envelope (EMG(env)) were analyzed. NASA Task Load Index and Fundamentals of Laparoscopic Surgery score were used to evaluate the subjective performance. One-way repeated analysis of variance was applied to examine the effects of distraction on skills performance. Spearman's correlations were conducted to compare objective and subjective measures. Significant distraction effect was found for all objective kinematics measures (P < .05). There were significant distraction effects for EMG measures (EMG(env), P < .004; EMG(fmed), P = .031). Significant distraction effects were also found for subjective measurements. Distraction impairs surgical skills performance and increases muscle work. Understanding how the surgeons cope with distractions is important in developing surgical education. © The Author(s) 2015.

Time domain SAR raw data simulation using CST and image focusing of 3D objects

NASA Astrophysics Data System (ADS)

Saeed, Adnan; Hellwich, Olaf

2017-10-01

This paper presents the use of a general purpose electromagnetic simulator, CST, to simulate realistic synthetic aperture radar (SAR) raw data of three-dimensional objects. Raw data is later focused in MATLAB using range-doppler algorithm. Within CST Microwave Studio a replica of TerraSAR-X chirp signal is incident upon a modeled Corner Reflector (CR) whose design and material properties are identical to that of the real one. Defining mesh and other appropriate settings reflected wave is measured at several distant points within a line parallel to the viewing direction. This is analogous to an array antenna and is synthesized to create a long aperture for SAR processing. The time domain solver in CST is based on the solution of differential form of Maxwells equations. Exported data from CST is arranged into a 2-d matrix of axis range and azimuth. Hilbert transform is applied to convert the real signal to complex data with phase information. Range compression, range cell migration correction (RCMC), and azimuth compression are applied in time domain to obtain the final SAR image. This simulation can provide valuable information to clarify which real world objects cause images suitable for high accuracy identification in the SAR images.

Waist Circumference and Objectively Measured Sedentary Behavior in Rural School Adolescents.

PubMed

Machado-Rodrigues, Aristides M; Coelho E Silva, Manuel J; Ribeiro, Luís P; Fernandes, Romulo; Mota, Jorge; Malina, Robert M

2016-01-01

Research on relationships between lifestyle behaviors and adiposity in school youth is potentially important for identifying subgroups at risk. This study evaluates the associations between waist circumference (WC) and objective measures of sedentary behavior (SB) in a sample of rural school adolescents. The sample included 254 students (114 boys, 140 girls), 13-16 years of age, from rural regions of the Portuguese midlands. Height, weight, and WC were measured. Cardiorespiratory fitness (CRF) was assessed with the 20-m shuttle-run test. An uniaxial GT1M accelerometer was used to obtain 5 consecutive days of physically activity (PA) and SB. Multiple linear regression was used to test associations between WC and SB, adjusted for several potential confounders (age, sex, PA, CRF, parental education). SB was not significantly associated with the WC, neither in the unadjusted model nor after adjustment for all potential confounders. In the final model, the unique significant predictor of the WC was cardiorespiratory fitness (β = -0.82; 95% confidence interval [CI], -1.02 to -0.62). WC was not independently associated with SB time in rural school adolescents. Future research is claimed among rural adolescents in different geographic contexts to try to clarify recent findings of less studied communities. © 2015, American School Health Association.

Subjective and Objective Measures of Hypersomnolence Demonstrate Divergent Associations with Depression among Participants in the Wisconsin Sleep Cohort Study.

PubMed

Plante, David T; Finn, Laurel A; Hagen, Erika W; Mignot, Emmanuel; Peppard, Paul E

2016-04-15

To examine associations of depression with habitual sleep duration, daytime sleepiness, and objective sleep propensity in a nonclinical population. Data from adults participating in the Wisconsin Sleep Cohort Study were utilized in analyses. There were 1,287 adults (3,324 observations) who were used in the analysis of subjective hypersomnolence measures; 1,155 adults (2,981 observations) were used in the analysis of objective sleep propensity assessed by the multiple sleep latency test (MSLT). Repeated-measures logistic regression estimated associations between presence of depression (defined as modified Zung Self-Rating Depression Scale ≥ 50 or use of antidepressant medications) and three primary hypersomnolence measures: subjective excessive daytime sleepiness (Epworth Sleepiness Scale [ESS] ≥ 11), self-reported sleep duration ≥ 9 h/d, and objective sleep propensity (MSLT mean sleep latency < 8 min). After adjusting for age, sex, body mass index, chronic medical conditions, sedative hypnotic medication use, caffeine, tobacco, and alcohol use, sleep disordered breathing, as well as insomnia and sleep duration when appropriate, estimated odd ratios (95% confidence interval) for depression were: 1.56 (1.31,1.86) for ESS ≥ 11; 2.01 (1.49, 2.72) for habitual sleep time ≥ 9 h; and 0.76 (0.63-0.92) for MSLT mean sleep latency < 8 min. Our results demonstrate divergent associations between subjective and objective symptoms of hypersomnolence and depression, with subjective sleepiness and excessive sleep duration associated with increased odds of depression, but objective sleep propensity as measured by the MSLT associated with decreased odds of depression. Further research is indicated to explain this paradox and the impact of different hypersomnolence measures on the course of mood disorders. A commentary on this article appears in this issue on page 467. © 2016 American Academy of Sleep Medicine.

Contributed Review: Source-localization algorithms and applications using time of arrival and time difference of arrival measurements

DOE PAGES

Li, Xinya; Deng, Zhiqun Daniel; Rauchenstein, Lynn T.; ...

2016-04-01

Locating the position of fixed or mobile sources (i.e., transmitters) based on received measurements from sensors is an important research area that is attracting much research interest. In this paper, we present localization algorithms using time of arrivals (TOA) and time difference of arrivals (TDOA) to achieve high accuracy under line-of-sight conditions. The circular (TOA) and hyperbolic (TDOA) location systems both use nonlinear equations that relate the locations of the sensors and tracked objects. These nonlinear equations can develop accuracy challenges because of the existence of measurement errors and efficiency challenges that lead to high computational burdens. Least squares-based andmore » maximum likelihood-based algorithms have become the most popular categories of location estimators. We also summarize the advantages and disadvantages of various positioning algorithms. By improving measurement techniques and localization algorithms, localization applications can be extended into the signal-processing-related domains of radar, sonar, the Global Positioning System, wireless sensor networks, underwater animal tracking, mobile communications, and multimedia.« less

Contributed Review: Source-localization algorithms and applications using time of arrival and time difference of arrival measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Xinya; Deng, Zhiqun Daniel; Rauchenstein, Lynn T.

Locating the position of fixed or mobile sources (i.e., transmitters) based on received measurements from sensors is an important research area that is attracting much research interest. In this paper, we present localization algorithms using time of arrivals (TOA) and time difference of arrivals (TDOA) to achieve high accuracy under line-of-sight conditions. The circular (TOA) and hyperbolic (TDOA) location systems both use nonlinear equations that relate the locations of the sensors and tracked objects. These nonlinear equations can develop accuracy challenges because of the existence of measurement errors and efficiency challenges that lead to high computational burdens. Least squares-based andmore » maximum likelihood-based algorithms have become the most popular categories of location estimators. We also summarize the advantages and disadvantages of various positioning algorithms. By improving measurement techniques and localization algorithms, localization applications can be extended into the signal-processing-related domains of radar, sonar, the Global Positioning System, wireless sensor networks, underwater animal tracking, mobile communications, and multimedia.« less

Effect of geometrical features various objects on the data quality obtained with measured by TLS

NASA Astrophysics Data System (ADS)

Pawłowicz, J. A.

2017-08-01

Collecting data on different building structures using Terrestrial Laser Scanning (TLS) has become in recent years a very popular due to minimize the time required to complete the task as compared to traditional methods. Technical parameters of 3D scanning devices (digitizers) are increasingly being improved, and the accuracy of the data collected allows you to play not only the geometry of an existing object in a digital image, but also enables the assessment of his condition. This is possible thanks to the digitalization of existing objects e.g., a 3D laser scanner, with which is obtained a digital data base is presented in the form of a cloud of points and by using reverse engineering. Measurements using laser scanners depends to a large extent, on the quality of the returning beam reflected from the target surface, towards the receiver. High impact on the strength and quality of the beam returning to the geometric features of the object. These properties may contribute to the emergence of some, sometimes even serious errors during scanning of various shapes. The study defined the effect of the laser beam distortion during the measurement objects with the same material but with different geometrical features on their three-dimensional imaging obtained from measurements made using TLS. We present the problem of data quality, dependent on the deflection of the beam intensity and shape of the object selected examples. The knowledge of these problems allows to obtain valuable data necessary for the implementation of digitization and the visualization of virtually any building structure made of any materials. The studies has been proven that the increase in the density of scanning does not affect the values of mean square error. The increase in the angle of incidence of the beam onto a flat surface, however, causes a decrease in the intensity of scattered radiation that reaches the receiver. The article presents an analysis of the laser beam reflected from broken at

Time to antibiotics for septic shock: evaluating a proposed performance measure.

PubMed

Venkatesh, Arjun K; Avula, Umakanth; Bartimus, Holly; Reif, Justin; Schmidt, Michael J; Powell, Emilie S

2013-04-01

International guidelines recommend antibiotics within 1 hour of septic shock recognition; however, a recently proposed performance measure is focused on measuring antibiotic administration within 3 hours of emergency department (ED) arrival. Our objective was to describe the time course of septic shock and subsequent implications for performance measurement. Cross-sectional study of consecutive ED patients ultimately diagnosed with septic shock. All patients were evaluated at an urban, academic ED in 2006 to 2008. Primary outcomes included time to definition of septic shock and performance on 2 measures: antibiotics within 3 hours of ED arrival vs antibiotics within 1 hour of septic shock definition. Of 267 patients with septic shock, the median time to definition was 88 minutes (interquartile range, 37-156), and 217 patients (81.9%) met the definition within 3 hours of arrival. Of 221 (83.4%) of patients who received antibiotics within 3 hours of arrival, 38 (17.2%) did not receive antibiotics within 1 hour of definition. Of 207 patients who received antibiotics within 1 hour of definition, 11.6% (n = 24) did not receive antibiotics within 3 hours of arrival. The arrival measure did not accurately classify performance in 23.4% of patients. Nearly 1 of 5 patients cannot be captured for performance measurement within 3 hours of ED arrival due to the variable progression of septic shock. Use of this measure would misclassify performance in 23% of patients. Measuring antibiotic administration based on the clinical course of septic shock rather than from ED arrival would be more appropriate. Copyright © 2013 Elsevier Inc. All rights reserved.

Feasibility of objectively measured physical activity and sedentary behavior in patients with malignant pleural effusion.

PubMed

Jeffery, Emily; Lee, Yc Gary; McVeigh, Joanne; Straker, Leon; Wooding, Troy; Newton, Robert U; Peddle-McIntyre, Carolyn

2017-10-01

Malignant pleural effusion (MPE) affects 1 million people worldwide annually and can significantly impair physical activity. Accelerometry is a validated method of objectively assessing physical activity. The purpose of this study was to determine the compliance in patients with MPE to accelerometry and describe their activity. Patients with MPE wore an Actigraph GT3X accelerometer over a 7-day continuous wear protocol. Compliance was measured as the percent of patients who had ≥4 valid days (i.e., 8-h/day of waking wear-time). Eastern Cooperative Oncology Group performance status was documented the day of actigraphy initialization. Forty-six patients with MPE received accelerometers; 44 (95.7%) returned their device. No complications were reported on their use. Forty subjects (90.9%) had ≥4 valid days of wear-time. Patients spent most of their waking hours sedentary [mean 11.0 h (SD 1.95)], with limited participation in moderate and vigorous physical activity [mean 9.5 min (SD 14.16)]. Compared to patients with better performance status (n = 32), patients with poorer performance status (n = 11) spent significantly more hours/day sedentary [mean difference 2.1 (CI 0.86-3.32); p = 0.001], as did those who survived <3 months (n = 5) compared to >12 months (n = 27) [mean difference 2.6 (CI 0.49-4.77); p = 0.013). Accelerometry was applied successfully in patients with MPE with high compliance and no adverse events. This is the first reported objectively measured physical activity in patients with MPE and revealed high sedentary behavior and low physical activity. The data reflected patient performance status and discriminated between survival groups. Accelerometry can provide a useful measure for future interventional studies in patients with MPE.

Self-perceived versus objectively measured competence in performing clinical practical procedures by final year medical students

PubMed Central

Banda, Sekelani

2016-01-01

Objectives To determine and compare the self-perceived and objectively measured competence in performing 14 core-clinical practical procedures by Final Year Medical Students of the University of Zambia. Methods The study included 56 out of 60 graduating University of Zambia Medical Students of the 2012/2013 academic year. Self-perceived competence: students rated their competence on 14 core- clinical practical procedures using a self-administered questionnaire on a 5-point Likert scale. Objective competence: it was measured by Objective Structured Clinical Examination (OSCE) by faculty using predetermined rating scales. Rank order correlation test was performed for self-perceived and objectively measured competence. Results Two thirds 36 (66.7%) of the participants perceived themselves as moderately competent, 15 (27.8%) rated themselves as highly competent while 3 (5.6%) had low self-perception. With objective competence, the majority 52 (92.8%) were barely competent while 4 (7.2%) were absolutely competent. When overall self-perception was compared to objectively measured competence, there was a discordance which was demonstrated by a negative correlation (Spearman rho -.123). Conclusions Significant numbers of students reported low self-competence in performing procedures such as endotracheal intubation, gastric lavage and cardiopulmonary resuscitation which most never performed during the clinical years of medical education. In addition, the negative correlation between self-perceived and objectively measured competence demonstrated the inability of students to assess and rate themselves objectively due to fear that others may know their weaknesses and realize that they are not as competent as expected at a specific level of training. PMID:27132255

Decoding the time-course of object recognition in the human brain: From visual features to categorical decisions.

PubMed

Contini, Erika W; Wardle, Susan G; Carlson, Thomas A

2017-10-01

Visual object recognition is a complex, dynamic process. Multivariate pattern analysis methods, such as decoding, have begun to reveal how the brain processes complex visual information. Recently, temporal decoding methods for EEG and MEG have offered the potential to evaluate the temporal dynamics of object recognition. Here we review the contribution of M/EEG time-series decoding methods to understanding visual object recognition in the human brain. Consistent with the current understanding of the visual processing hierarchy, low-level visual features dominate decodable object representations early in the time-course, with more abstract representations related to object category emerging later. A key finding is that the time-course of object processing is highly dynamic and rapidly evolving, with limited temporal generalisation of decodable information. Several studies have examined the emergence of object category structure, and we consider to what degree category decoding can be explained by sensitivity to low-level visual features. Finally, we evaluate recent work attempting to link human behaviour to the neural time-course of object processing. Copyright © 2017 Elsevier Ltd. All rights reserved.

Real-time, resource-constrained object classification on a micro-air vehicle

NASA Astrophysics Data System (ADS)

Buck, Louis; Ray, Laura

2013-12-01

A real-time embedded object classification algorithm is developed through the novel combination of binary feature descriptors, a bag-of-visual-words object model and the cortico-striatal loop (CSL) learning algorithm. The BRIEF, ORB and FREAK binary descriptors are tested and compared to SIFT descriptors with regard to their respective classification accuracies, execution times, and memory requirements when used with CSL on a 12.6 g ARM Cortex embedded processor running at 800 MHz. Additionally, the effect of x2 feature mapping and opponent-color representations used with these descriptors is examined. These tests are performed on four data sets of varying sizes and difficulty, and the BRIEF descriptor is found to yield the best combination of speed and classification accuracy. Its use with CSL achieves accuracies between 67% and 95% of those achieved with SIFT descriptors and allows for the embedded classification of a 128x192 pixel image in 0.15 seconds, 60 times faster than classification with SIFT. X2 mapping is found to provide substantial improvements in classification accuracy for all of the descriptors at little cost, while opponent-color descriptors are offer accuracy improvements only on colorful datasets.

Daily Variations in Objective Nighttime Sleep and Subjective Morning Pain in Older Adults with Insomnia: Evidence of Covariation Over Time

PubMed Central

Dzierzewski, Joseph M.; Williams, Jacob M.; Roditi, Daniela; Marsiske, Michael; McCoy, Karin; McNamara, Joseph; Dautovich, Natalie; Robinson, Michael E.; McCrae, Christina S.

2010-01-01

Objectives To examine the relationship between objectively measured nocturnal sleep and subjective report of morning pain in older adults with insomnia. The goal of the paper was to not only examine the sleep-pain association between-persons (mean-level over 14 days), but also to investigate the within-person, day-to-day association. Design Cross-sectional. Setting North-Central Florida. Participants Fifty community-dwelling older adults (Mage = 69.10 years, SDage = 7.02 years, range = 60 – 90 years) with insomnia participated in the study. Measurements This study employed daily home-based assessment utilizing nightly actigraphic measurement of sleep and daily self-report of pain. Measures were completed over fourteen consecutive days. Results Between persons, average sleep over 14 days was not associated with average levels of rated pain. However, following a night in which an older adult with insomnia experienced above-average total sleep time s/he subsequently reported below-average pain ratings. The model explained approximately 24% of the within-person and 8% of the between-person variance in pain ratings. Conclusions Sleep and pain show day-to-day associations (i.e., covary over time) in older adults with insomnia. Such associations may suggest that common physiological systems underlie both the experience of insomnia and pain. Future research should examine the crossover effects of sleep treatment on pain and of pain treatment on sleep. PMID:20406316

An objective measure of hyperactivity aspects with compressed webcam video.

PubMed

Wehrmann, Thomas; Müller, Jörg Michael

2015-01-01

Objective measures of physical activity are currently not considered in clinical guidelines for the assessment of hyperactivity in the context of Attention-Deficit/Hyperactivity Disorder (ADHD) due to low and inconsistent associations between clinical ratings, missing age-related norm data and high technical requirements. This pilot study introduces a new objective measure for physical activity using compressed webcam video footage, which should be less affected by age-related variables. A pre-test established a preliminary standard procedure for testing a clinical sample of 39 children aged 6-16 years (21 with a clinical ADHD diagnosis, 18 without). Subjects were filmed for 6 min while solving a standardized cognitive performance task. Our webcam video-based video-activity score was compared with respect to two independent video-based movement ratings by students, ratings of Inattentiveness, Hyperactivity and Impulsivity by clinicians (DCL-ADHS) giving a clinical diagnosis of ADHD and parents (FBB-ADHD) and physical features (age, weight, height, BMI) using mean scores, correlations and multiple regression. Our video-activity score showed a high agreement (r = 0.81) with video-based movement ratings, but also considerable associations with age-related physical attributes. After controlling for age-related confounders, the video-activity score showed not the expected association with clinicians' or parents' hyperactivity ratings. Our preliminary conclusion is that our video-activity score assesses physical activity but not specific information related to hyperactivity. The general problem of defining and assessing hyperactivity with objective criteria remains.

Real-time model-based vision system for object acquisition and tracking

NASA Technical Reports Server (NTRS)

Wilcox, Brian; Gennery, Donald B.; Bon, Bruce; Litwin, Todd

1987-01-01

A machine vision system is described which is designed to acquire and track polyhedral objects moving and rotating in space by means of two or more cameras, programmable image-processing hardware, and a general-purpose computer for high-level functions. The image-processing hardware is capable of performing a large variety of operations on images and on image-like arrays of data. Acquisition utilizes image locations and velocities of the features extracted by the image-processing hardware to determine the three-dimensional position, orientation, velocity, and angular velocity of the object. Tracking correlates edges detected in the current image with edge locations predicted from an internal model of the object and its motion, continually updating velocity information to predict where edges should appear in future frames. With some 10 frames processed per second, real-time tracking is possible.

Verification of FLYSAFE Clear Air Turbulence (CAT) objects against aircraft turbulence measurements

NASA Astrophysics Data System (ADS)

Lunnon, R.; Gill, P.; Reid, L.; Mirza, A.

2009-09-01

Prediction of gridded CAT fields The main causes of CAT are (a) Vertical wind shear - low Richardson Number (b) Mountain waves (c) Convection. All three causes contribute roughly equally to CAT occurrences, globally Prediction of shear induced CAT The predictions of shear induced CAT has a longer history than either mountain-wave induced CAT or convectively induced CAT. Both Global Aviation Forecasting Centres are currently using the Ellrod TI1 algorithm (Ellrod and Knapp, 1992). This predictor is the scalar product of deformation [akm1]and vertical wind shear. More sophisticated algorithms can amplify errors in non-linear, differentiated quantities so it is very likely that Ellrod will out-perform other algorithms when verified globally. Prediction of mountain wave CAT The Global Aviation Forecasting Centre in the UK has been generating automated forecasts of mountain wave CAT since the late 1990s, based on the diagnosis of gravity wave drag. Generation of CAT objects In the FLYSAFE project it was decided at an early stage that short range forecasts of meteorological hazards, i.e. icing, Clear Air Turbulence, Cumulonimbus Clouds, should be represented as weather objects, that is, descriptions of individual hazardous volumes of airspace. For CAT, the forecast information on which the weather objects were based was gridded, that comprised a representation of a hazard level for all points in a pre-defined 3-D grid, for a range of forecast times. A "grid-to-objects" capability was generated. This is discussed further in Mirza and Drouin (this conference). Verification of CAT forecasts Verification was performed using digital accelerometer data from aircraft in the British Airways Boeing 747 fleet. A preliminary processing of the aircraft data were performed to generate a truth field on a scale similar to that used to provide gridded forecasts to airlines. This truth field was binary, i.e. each flight segment was characterised as being either "turbulent" or "benign". A

The association between objectively measured physical activity and life-space mobility among older people.

PubMed

Tsai, L-T; Portegijs, E; Rantakokko, M; Viljanen, A; Saajanaho, M; Eronen, J; Rantanen, T

2015-08-01

The purpose of this cross-sectional study was to investigate the association between objectively measured physical activity and life-space mobility in community-dwelling older people. Life-space refers to the spatial area a person purposefully moves through in daily life (bedroom, home, yard, neighborhood, town, and beyond) and life-space mobility to the frequency of travel and the help needed when moving through different life-space areas. The study population comprised community-living 75- to 90-year-old people {n = 174; median age 79.7 [interquartile range (IQR) 7.1]}, participating in the accelerometer substudy of Life-Space Mobility in Old Age (LISPE) project. Step counts and activity time were measured by an accelerometer (Hookie "AM20 Activity Meter") for 7 days. Life-space mobility was assessed with Life-Space Assessment (LSA) questionnaire. Altogether, 16% had a life-space area restricted to the neighborhood when moving independently. Participants with a restricted life space were less physically active and about 70% of them had exceptionally low values in daily step counts (≤ 615 steps) and moderate activity time (≤ 6.8 min). Higher step counts and activity time correlated positively with life-space mobility. Prospective studies are needed to clarify the temporal order of low physical activity level and restriction in life-space mobility. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Real-time detection of moving objects from moving vehicles using dense stereo and optical flow

NASA Technical Reports Server (NTRS)

Talukder, Ashit; Matthies, Larry

2004-01-01

Dynamic scene perception is very important for autonomous vehicles operating around other moving vehicles and humans. Most work on real-time object tracking from moving platforms has used sparse features or assumed flat scene structures. We have recently extended a real-time, dense stereo system to include real-time, dense optical flow, enabling more comprehensive dynamic scene analysis. We describe algorithms to robustly estimate 6-DOF robot egomotion in the presence of moving objects using dense flow and dense stereo. We then use dense stereo and egomotion estimates to identity other moving objects while the robot itself is moving. We present results showing accurate egomotion estimation and detection of moving people and vehicles under general 6-DOF motion of the robot and independently moving objects. The system runs at 18.3 Hz on a 1.4 GHz Pentium M laptop, computing 160x120 disparity maps and optical flow fields, egomotion, and moving object segmentation. We believe this is a significant step toward general unconstrained dynamic scene analysis for mobile robots, as well as for improved position estimation where GPS is unavailable.

Blind source separation based on time-frequency morphological characteristics for rigid acoustic scattering by underwater objects

NASA Astrophysics Data System (ADS)

Yang, Yang; Li, Xiukun

2016-06-01

Separation of the components of rigid acoustic scattering by underwater objects is essential in obtaining the structural characteristics of such objects. To overcome the problem of rigid structures appearing to have the same spectral structure in the time domain, time-frequency Blind Source Separation (BSS) can be used in combination with image morphology to separate the rigid scattering components of different objects. Based on a highlight model, the separation of the rigid scattering structure of objects with time-frequency distribution is deduced. Using a morphological filter, different characteristics in a Wigner-Ville Distribution (WVD) observed for single auto term and cross terms can be simplified to remove any cross-term interference. By selecting time and frequency points of the auto terms signal, the accuracy of BSS can be improved. An experimental simulation has been used, with changes in the pulse width of the transmitted signal, the relative amplitude and the time delay parameter, in order to analyzing the feasibility of this new method. Simulation results show that the new method is not only able to separate rigid scattering components, but can also separate the components when elastic scattering and rigid scattering exist at the same time. Experimental results confirm that the new method can be used in separating the rigid scattering structure of underwater objects.

Collaborative real-time scheduling of multiple PTZ cameras for multiple object tracking in video surveillance

NASA Astrophysics Data System (ADS)

Liu, Yu-Che; Huang, Chung-Lin

2013-03-01

This paper proposes a multi-PTZ-camera control mechanism to acquire close-up imagery of human objects in a surveillance system. The control algorithm is based on the output of multi-camera, multi-target tracking. Three main concerns of the algorithm are (1) the imagery of human object's face for biometric purposes, (2) the optimal video quality of the human objects, and (3) minimum hand-off time. Here, we define an objective function based on the expected capture conditions such as the camera-subject distance, pan tile angles of capture, face visibility and others. Such objective function serves to effectively balance the number of captures per subject and quality of captures. In the experiments, we demonstrate the performance of the system which operates in real-time under real world conditions on three PTZ cameras.

On measuring time metaphors.

PubMed

Sobol-Kwapinska, Malgorzata; Oles, Piotr K

2007-02-01

Referring to the 2005 article by Wittmann and Lehnhoff, the problem of using time metaphors for measuring awareness of time is posed. Starting from clarification of meaning, the Metaphors Slowness scale which was not homogeneous, an alternative interpretation of the result was proposed, given that metaphors refer to two separate aspects of time speed, an ongoing passage of time, and ex post reflection on passage of time that has already passed. The former refers to the judgment of an ongoing passage of time, and the latter to the judgment of passage of past time from a particular point in the past till now. Time perception is multifaceted and perhaps ambiguous. This particular aspect of time perception is covered by a notion of a "dialectical time", when opposite aspects of time are combined, e.g., pleasant and unpleasant ones.

Does real-time objective feedback and competition improve performance and quality in manikin CPR training--a prospective observational study from several European EMS.

PubMed

Smart, J R; Kranz, K; Carmona, F; Lindner, T W; Newton, A

2015-10-15

Previous studies have reported that the quality of cardiopulmonary resuscitation (CPR) is important for patient survival. Real time objective feedback during manikin training has been shown to improve CPR performance. Objective measurement could facilitate competition and help motivate participants to improve their CPR performance. The aims of this study were to investigate whether real time objective feedback on manikins helps improve CPR performance and whether competition between separate European Emergency Medical Services (EMS) and between participants at each EMS helps motivation to train. Ten European EMS took part in the study and was carried out in two stages. At Stage 1, each EMS provided 20 pre-hospital professionals. A questionnaire was completed and standardised assessment scenarios were performed for adult and infant out of hospital cardiac arrest (OHCA). CPR performance was objectively measured and recorded but no feedback given. Between Stage 1 and 2, each EMS was given access to manikins for 6 months and instructed on how to use with objective real-time CPR feedback available. Stage 2 was undertaken and was a repeat of Stage 1 with a questionnaire with additional questions relating to usefulness of feedback and the competition nature of the study (using a 10 point Likert score). The EMS that improved the most from Stage 1 to Stage 2 was declared the winner. An independent samples Student t-test was used to analyse the objective CPR metrics with the significance level taken as p < 0.05. Overall mean Improvement of CPR performance from Stage 1 to Stage 2 was significant. The improvement was greater for the infant assessment. The participants thought the real-time feedback very useful (mean score of 8.5) and very easy to use (mean score of 8.2). Competition between EMS organisations recorded a mean score of 5.8 and competition between participants recorded a mean score of 6.0. The results suggest that the use of real time objective feedback can

Objectively measured physical activity in Brazilians with visual impairment: description and associated factors.

PubMed

Barbosa Porcellis da Silva, Rafael; Marques, Alexandre Carriconde; Reichert, Felipe Fossati

2017-05-19

Low level of physical activity is a serious health issue in individuals with visual impairment. Few studies have objectively measured physical activity in this population group, particularly outside high-income countries. The aim of this study was to describe physical activity measured by accelerometry and its associated factors in Brazilian adults with visual impairment. In a cross-sectional design, 90 adults (18-95 years old) answered a questionnaire and wore an accelerometer for at least 3 days (including one weekend day) to measure physical activity (min/day). Sixty percent of the individuals practiced at least 30 min/day of moderate-to-vigorous physical activity. Individuals who were blind were less active, spent more time in sedentary activities and spent less time in moderate and vigorous activities than those with low vision. Individuals who walked mainly without any assistance were more active, spent less time in sedentary activities and spent more time in light and moderate activities than those who walked with a long cane or sighted guide. Our data highlight factors associated with lower levels of physical activity in people with visual impairment. These factors, such as being blind and walking without assistance should be tackled in interventions to increase physical activity levels among visual impairment individuals. Implications for Rehabilitation Physical inactivity worldwide is a serious health issue in people with visual impairments and specialized institutions and public policies must work to increase physical activity level of this population. Those with lower visual acuity and walking with any aid are at a higher risk of having low levels of physical activity. The association between visual response profile, living for less than 11 years with visual impairment and PA levels deserves further investigations Findings of the present study provide reliable data to support rehabilitation programs, observing the need of taking special attention to

The Validation by Measurement Theory of Proposed Object-Oriented Software Metrics

NASA Technical Reports Server (NTRS)

Neal, Ralph D.

1996-01-01

Moving software development into the engineering arena requires controllability, and to control a process, it must be measurable. Measuring the process does no good if the product is not also measured, i.e., being the best at producing an inferior product does not define a quality process. Also, not every number extracted from software development is a valid measurement. A valid measurement only results when we are able to verify that the number is representative of the attribute that we wish to measure. Many proposed software metrics are used by practitioners without these metrics ever having been validated, leading to costly but often useless calculations. Several researchers have bemoaned the lack of scientific precision in much of the published software measurement work and have called for validation of software metrics by measurement theory. This dissertation applies measurement theory to validate fifty proposed object-oriented software metrics.

[Comparison study on subjective and objective measurements of the accommodative convergence to accommodation ratio].

PubMed

Xu, Jing-jing; Xu, Dan; Huang, Tao; Jiang, Jian; Lü, Fan

2012-05-01

To detect the accommodative convergence to accommodation (AC/A) ratios measured respectively by objective and subjective methods. The differences and its relative factors were explored. Forty young volunteers were measured by eye tracker to get the amount of convergence when fixating at the target at 100 cm, 50 cm, 33 cm and 25 cm and were measured by infrared auto-refractor to get corresponding accommodative responses. AC/A ratio based on these two measurements were compared with the calculated and the gradient AC/A ratio from Von Graefe tests. Mean value of stimulated AC/A ratio measured by eye tracker was higher than the calculated and gradient AC/A ratio by Von Graefe method (P = 0.003, 0.001). There are statistic correlation (r = 0.871, P = 0.000) and difference (P = 0.000) between stimulated AC/A ratio and response AC/A ratios both measured by eye tracker, and the difference trends to be greater with the higher AC/A ratio. The objective AC/A ratio is usually higher than the clinical subjective measurement because of more proximal effect. The response AC/A ratio measured objectively may reveal realistically the mutual effect and relationship between accommodation and convergence and it seems to be more credible to be the monitor parameter on progression of myopia in clinics.

Archimedes Revisited: A Faster, Better, Cheaper Method of Accurately Measuring the Volume of Small Objects

ERIC Educational Resources Information Center

Hughes, Stephen W.

2005-01-01

A little-known method of measuring the volume of small objects based on Archimedes' principle is described, which involves suspending an object in a water-filled container placed on electronic scales. The suspension technique is a variation on the hydrostatic weighing technique used for measuring volume. The suspension method was compared with two…

Self-perceived versus objectively measured competence in performing clinical practical procedures by final year medical students.

PubMed

Katowa-Mukwato, Patricia; Banda, Sekelani

2016-04-30

To determine and compare the self-perceived and objectively measured competence in performing 14 core-clinical practical procedures by Final Year Medical Students of the University of Zambia. The study included 56 out of 60 graduating University of Zambia Medical Students of the 2012/2013 academic year. Self-perceived competence: students rated their competence on 14 core- clinical practical procedures using a self-administered questionnaire on a 5-point Likert scale. Objective competence: it was measured by Objective Structured Clinical Examination (OSCE) by faculty using predetermined rating scales. Rank order correlation test was performed for self-perceived and objectively measured competence. Two thirds 36 (66.7%) of the participants perceived themselves as moderately competent, 15 (27.8%) rated themselves as highly competent while 3 (5.6%) had low self-perception. With objective competence, the majority 52 (92.8%) were barely competent while 4 (7.2%) were absolutely competent. When overall self-perception was compared to objectively measured competence, there was a discordance which was demonstrated by a negative correlation (Spearman rho -.123). Significant numbers of students reported low self-competence in performing procedures such as endotracheal intubation, gastric lavage and cardiopulmonary resuscitation which most never performed during the clinical years of medical education. In addition, the negative correlation between self-perceived and objectively measured competence demonstrated the inability of students to assess and rate themselves objectively due to fear that others may know their weaknesses and realize that they are not as competent as expected at a specific level of training.

Objective measures of listening effort: effects of background noise and noise reduction.

PubMed

Sarampalis, Anastasios; Kalluri, Sridhar; Edwards, Brent; Hafter, Ervin

2009-10-01

This work is aimed at addressing a seeming contradiction related to the use of noise-reduction (NR) algorithms in hearing aids. The problem is that although some listeners claim a subjective improvement from NR, it has not been shown to improve speech intelligibility, often even making it worse. To address this, the hypothesis tested here is that the positive effects of NR might be to reduce cognitive effort directed toward speech reception, making it available for other tasks. Normal-hearing individuals participated in 2 dual-task experiments, in which 1 task was to report sentences or words in noise set to various signal-to-noise ratios. Secondary tasks involved either holding words in short-term memory or responding in a complex visual reaction-time task. At low values of signal-to-noise ratio, although NR had no positive effect on speech reception thresholds, it led to better performance on the word-memory task and quicker responses in visual reaction times. Results from both dual tasks support the hypothesis that NR reduces listening effort and frees up cognitive resources for other tasks. Future hearing aid research should incorporate objective measurements of cognitive benefits.

Objective Measures for the Assessment of Post-Operative Pain in Bos indicus Bull Calves Following Castration

PubMed Central

Musk, Gabrielle C.; Hyndman, Timothy H.; Lehmann, Heidi S.; Tuke, S. Jonathon; Collins, Teresa; Johnson, Craig B.

2017-01-01

was collected for the measurement of serum amyloid A (SAA), haptoglobin, fibrinogen, and iron on days 0, 3 and 6. Bodyweight and pedometry data were analysed with a mixed effect model. The blood results were analysed with repeated measure one-way analysis of variance (ANOVA). There was no treatment effect on bodyweight or activity. The duration of rest was greatest in the CM group and lowest in the C group. There was a significant increase in the concentrations of SAA, haptoglobin, and fibrinogen in all of the groups from day 0 to 3. Iron concentrations were not different at the time points it was measured. The results of this study suggest that animals rest for longer periods after the pre-operative administration of meloxicam. The other objective assessments measured in this study were not able to consistently differentiate between treatment groups. PMID:28956843

Object oriented design (OOD) in real-time hardware-in-the-loop (HWIL) simulations

NASA Astrophysics Data System (ADS)

Morris, Joe; Richard, Henri; Lowman, Alan; Youngren, Rob

2006-05-01

Using Object Oriented Design (OOD) concepts in AMRDEC's Hardware-in-the Loop (HWIL) real-time simulations allows the user to interchange parts of the simulation to meet test requirements. A large-scale three-spectral band simulator connected via a high speed reflective memory ring for time-critical data transfers to PC controllers connected by non real-time Ethernet protocols is used to separate software objects from logical entities close to their respective controlled hardware. Each standalone object does its own dynamic initialization, real-time processing, and end of run processing; therefore it can be easily maintained and updated. A Resource Allocation Program (RAP) is also utilized along with a device table to allocate, organize, and document the communication protocol between the software and hardware components. A GUI display program lists all allocations and deallocations of HWIL memory and hardware resources. This interactive program is also used to clean up defunct allocations of dead processes. Three examples are presented using the OOD and RAP concepts. The first is the control of an ACUTRONICS built three-axis flight table using the same control for calibration and real-time functions. The second is the transportability of a six-degree-of-freedom (6-DOF) simulation from an Onyx residence to a Linux-PC. The third is the replacement of the 6-DOF simulation with a replay program to drive the facility with archived run data for demonstration or analysis purposes.

Are objective measures of physical capability related to accelerated epigenetic age? Findings from a British birth cohort

PubMed Central

Cooper, Rachel; Howe, Laura D; Relton, Caroline L; Davey Smith, George; Teschendorff, Andrew; Widschwendter, Martin; Wong, Andrew; Kuh, Diana; Hardy, Rebecca

2017-01-01

Objectives Our aim was to investigate the association of epigenetic age and physical capability in later life. Having a higher epigenetic than chronological age (known as age acceleration (AA)) has been found to be associated with an increased rate of mortality. Similarly, physical capability has been proposed as a marker of ageing due to its consistent associations with mortality. Setting The MRC National Survey of Health and Development (NSHD) cohort study. Participants We used data from 790 women from the NSHD who had DNA methylation data available. Design Epigenetic age was calculated using buccal cell (n=790) and matched blood tissue (n=152) from 790 female NSHD participants. We investigated the association of AA at age 53 with changes in physical capability in women from ages 53 to 60–64. Regression models of change in each measure of physical capability on AA were conducted. Secondary analysis focused on the relationship between AA and smoking, alcohol, body mass index (BMI) and socioeconomic position. Outcome measures Three objective measures of physical capability were used: grip strength, standing balance time and chair rise speed. Results Epigenetic age was lower than chronological age (mean 53.4) for both blood (50.3) and buccal cells (42.8). AA from blood was associated with a greater decrease in grip strength from ages 53 to 60–64 (0.42 kg decrease per year of AA, 95% CI 0.03, 0.82 kg; p=0.03, n=152), but no associations were observed with standing balance time or chair rise speed. Current smoking and lower BMI were associated with lower epigenetic age from buccal cells. Conclusions We found evidence that AA in blood is associated with a greater decrease in grip strength in British females aged between 53 and 60–64, but no association with standing balance time or chair rise speed was found. PMID:29092899

Objective measures of prospective memory do not correlate with subjective complaints in schizophrenia.

PubMed

Chan, Raymond C K; Wang, Ya; Ma, Zheng; Hong, Xiao-hong; Yuan, Yanbo; Yu, Xin; Li, Zhanjiang; Shum, David; Gong, Qi-yong

2008-08-01

While a number of studies have shown that individuals with schizophrenia are impaired on various types of prospective memory, few studies have examined the relationship between subjective and objective measures of this construct in this clinical group. The purpose of the current study was to explore the relationship between computer-based prospective memory tasks and the corresponding subjective complaints in patients with schizophrenia, individuals with schizotypal personality features, and healthy volunteers. The findings showed that patients with schizophrenia demonstrated significantly poorer performance in all domains of memory function except visual memory than individuals with schizotypal personality disorder and healthy controls. More importantly, there was a significant interaction effect of prospective memory type and group. Although patients with schizophrenia were found to show significantly poorer performance on computer-based measures of prospective memory than controls, their level of subjective complaint was not found to be significantly higher. While subjective complaints of prospective memory were found to associate significantly with self-reported executive dysfunctions, significant relationships were not found between these complaints and performance on a computer-based task of prospective memory and other objective measures of memory. Taken together, these findings suggest that subjective and objective measures of prospective memory are two distinct domains that might need to be assessed and addressed separately.

Optical derotator alignment using image-processing algorithm for tracking laser vibrometer measurements of rotating objects.

PubMed

Khalil, Hossam; Kim, Dongkyu; Jo, Youngjoon; Park, Kyihwan

2017-06-01

An optical component called a Dove prism is used to rotate the laser beam of a laser-scanning vibrometer (LSV). This is called a derotator and is used for measuring the vibration of rotating objects. The main advantage of a derotator is that it works independently from an LSV. However, this device requires very specific alignment, in which the axis of the Dove prism must coincide with the rotational axis of the object. If the derotator is misaligned with the rotating object, the results of the vibration measurement are imprecise, owing to the alteration of the laser beam on the surface of the rotating object. In this study, a method is proposed for aligning a derotator with a rotating object through an image-processing algorithm that obtains the trajectory of a landmark attached to the object. After the trajectory of the landmark is mathematically modeled, the amount of derotator misalignment with respect to the object is calculated. The accuracy of the proposed method for aligning the derotator with the rotating object is experimentally tested.

Tracking Object Existence From an Autonomous Patrol Vehicle

NASA Technical Reports Server (NTRS)

Wolf, Michael; Scharenbroich, Lucas

2011-01-01

An autonomous vehicle patrols a large region, during which an algorithm receives measurements of detected potential objects within its sensor range. The goal of the algorithm is to track all objects in the region over time. This problem differs from traditional multi-target tracking scenarios because the region of interest is much larger than the sensor range and relies on the movement of the sensor through this region for coverage. The goal is to know whether anything has changed between visits to the same location. In particular, two kinds of alert conditions must be detected: (1) a previously detected object has disappeared and (2) a new object has appeared in a location already checked. For the time an object is within sensor range, the object can be assumed to remain stationary, changing position only between visits. The problem is difficult because the upstream object detection processing is likely to make many errors, resulting in heavy clutter (false positives) and missed detections (false negatives), and because only noisy, bearings-only measurements are available. This work has three main goals: (1) Associate incoming measurements with known objects or mark them as new objects or false positives, as appropriate. For this, a multiple hypothesis tracker was adapted to this scenario. (2) Localize the objects using multiple bearings-only measurements to provide estimates of global position (e.g., latitude and longitude). A nonlinear Kalman filter extension provides these 2D position estimates using the 1D measurements. (3) Calculate the probability that a suspected object truly exists (in the estimated position), and determine whether alert conditions have been triggered (for new objects or disappeared objects). The concept of a probability of existence was created, and a new Bayesian method for updating this probability at each time step was developed. A probabilistic multiple hypothesis approach is chosen because of its superiority in handling the

The validation by measurement theory of proposed object-oriented software metrics

NASA Technical Reports Server (NTRS)

Neal, Ralph D.

1994-01-01

Moving software development into the engineering arena requires controllability, and to control a process, it must be measurable. Measuring the process does no good if the product is not also measured, i.e., being the best at producing an inferior product does not define a quality process. Also, not every number extracted from software development is a valid measurement. A valid measurement only results when we are able to verify that the number is representative of the attribute that we wish to measure. Many proposed software metrics are used by practitioners without these metrics ever having been validated, leading to costly but often useless calculations. Several researchers have bemoaned the lack of scientific precision in much of the published software measurement work and have called for validation of software metrics by measurement theory. This dissertation applies measurement theory to validate fifty proposed object-oriented software metrics (Li and Henry, 1993; Chidamber and Kemerrer, 1994; Lorenz and Kidd, 1994).

On the correlation between objective measurements and subjectively felt disturbance from traffic

NASA Technical Reports Server (NTRS)

Lans, J.

1981-01-01

Measurements of traffic noise during the day were taken at 90 measurement points over the urban area of Vienna; in addition, the vehicle frequency ascertained at the individual measurement points was also noted. Results of these objective measurements or various characteristic single values derived from them are compared with the results of the environmental survey of 1973 on the subjective noise stress experienced within buildings but caused by outside factors. Suggestions for suitable measures to describe the traffic noise and to derive limit values are given considering the relationship between number of vehicles and noise and annoyance.

Moving through Life-Space Areas and Objectively Measured Physical Activity of Older People.

PubMed

Portegijs, Erja; Tsai, Li-Tang; Rantanen, Taina; Rantakokko, Merja

2015-01-01

Physical activity-an important determinant of health and function in old age-may vary according to the life-space area reached. Our aim was to study how moving through greater life-space areas is associated with greater physical activity of community-dwelling older people. The association between objectively measured physical activity and life-space area reached on different days by the same individual was studied using one-week longitudinal data, to provide insight in causal relationships. One-week surveillance of objectively assessed physical activity of community-dwelling 70-90-year-old people in central Finland from the "Life-space mobility in old age" cohort substudy (N = 174). In spring 2012, participants wore an accelerometer for 7 days and completed a daily diary including the largest life-space area reached (inside home, outside home, neighborhood, town, and beyond town). The daily step count, and the time in moderate (incl. walking) and low activity and sedentary behavior were assessed. Differences in physical activity between days on which different life-space areas were reached were tested using Generalized Estimation Equation models (within-group comparison). Participants' mean age was 80.4±4.2 years and 63.5% were female. Participants had higher average step counts (p < .001) and greater moderate and low activity time (p < .001) on days when greater life-space areas were reached, from the home to the town area. Only low activity time continued to increase when moving beyond the town. Community-dwelling older people were more physically active on days when they moved through greater life-space areas. While it is unknown whether physical activity was a motivator to leave the home, intervention studies are needed to determine whether facilitation of daily outdoor mobility, regardless of the purpose, may be beneficial in terms of promoting physical activity.

Waist Circumference and Objectively Measured Sedentary Behavior in Rural School Adolescents

ERIC Educational Resources Information Center

Machado-Rodrigues, Aristides M.; Coelho e Silva, Manuel J.; Ribeiro, Luís P.; Fernandes, Romulo; Mota, Jorge; Malina, Robert M.

2016-01-01

Background: Research on relationships between lifestyle behaviors and adiposity in school youth is potentially important for identifying subgroups at risk. This study evaluates the associations between waist circumference (WC) and objective measures of sedentary behavior (SB) in a sample of rural school adolescents. Methods: The sample included…

Objective assessment of actual chewing side by measurement of bilateral masseter muscle electromyography.

PubMed

Yamasaki, Yo; Kuwatsuru, Rika; Tsukiyama, Yoshihiro; Matsumoto, Hiroshi; Oki, Kyosuke; Koyano, Kiyoshi

2015-12-01

The aim of this study was to examine the validity of objective assessment of actual chewing side by measurement of electromyographic (EMG) activity of the bilateral masseter muscles upon chewing test foods. The sample consisted of 19 healthy, dentate individuals. The subjects were asked to chew three types of test foods (peanuts, beef jerky, and chewing gum) for 10 strokes on the right side and then on the left side, and instructed to perform maximum voluntary clenching for 3s, three times. EMG activity from the bilateral masseter muscles was recorded. The data were collected in three different days. The root mean square EMG amplitude obtained from the maximum clenching task was used as the maximum voluntary contraction (MVC). Then, the level of amplitude against the MVC (%MVC) was calculated for the right and left sides on each stroke. The side with the larger %MVC value was judged as the chewing side, and the concordance rates (CRs) for the instructed chewing side (ICS) and the judged chewing side (JCS) were calculated. Intraclass correlation coefficients (ICCs) of the CRs were calculated to evaluate the reproducibility of the method. High CRs between the ICS and JCS for each test food were recognized. There were significant ICCs for beef jerky (R=0.761, P<0.001) and chewing gum (R=0.785, P<0.001). The results suggested that the measurement of EMG activity from the bilateral masseter muscles may be a useful method for the objective determination of the actual chewing side during mastication. Copyright © 2015 Elsevier Ltd. All rights reserved.

Colors of Outer Solar System Objects Measured with VATT

NASA Astrophysics Data System (ADS)

Romanishin, William; Tegler, S. C.; Consolmagno, G. J.

2010-10-01

Over the past 7 years, we have measured optical B-V and V-R colors for about 40 minor outer solar system objects using the 1.8-m Vatican Advanced Technology Telescope (VATT) located on Mt. Graham in southeast Arizona. We will present these colors and use them to update the discussion of colors of minor bodies in the outer solar system. We gratefully acknowledge funding from the NASA Planetary Astronomy Program to Northern Arizona University and the U. of Oklahoma which helped support this work.

Objective quantification of the tinnitus decompensation by synchronization measures of auditory evoked single sweeps.

PubMed

Strauss, Daniel J; Delb, Wolfgang; D'Amelio, Roberto; Low, Yin Fen; Falkai, Peter

2008-02-01

Large-scale neural correlates of the tinnitus decompensation might be used for an objective evaluation of therapies and neurofeedback based therapeutic approaches. In this study, we try to identify large-scale neural correlates of the tinnitus decompensation using wavelet phase stability criteria of single sweep sequences of late auditory evoked potentials as synchronization stability measure. The extracted measure provided an objective quantification of the tinnitus decompensation and allowed for a reliable discrimination between a group of compensated and decompensated tinnitus patients. We provide an interpretation for our results by a neural model of top-down projections based on the Jastreboff tinnitus model combined with the adaptive resonance theory which has not been applied to model tinnitus so far. Using this model, our stability measure of evoked potentials can be linked to the focus of attention on the tinnitus signal. It is concluded that the wavelet phase stability of late auditory evoked potential single sweeps might be used as objective tinnitus decompensation measure and can be interpreted in the framework of the Jastreboff tinnitus model and adaptive resonance theory.

Temperature measurements on fast-rotating objects using a thermographic camera with an optomechanical image derotator

NASA Astrophysics Data System (ADS)

Altmann, Bettina; Pape, Christian; Reithmeier, Eduard

2017-08-01

Increasing requirements concerning the quality and lifetime of machine components in industrial and automotive applications require comprehensive investigations of the components in conditions close to the application. Irregularities in heating of mechanical parts reveal regions with increased loading of pressure, draft or friction. In the long run this leads to damage and total failure of the machine. Thermographic measurements of rotating objects, e.g., rolling bearings, brakes, and clutches provide an approach to investigate those defects. However, it is challenging to measure fast-rotating objects accurately. Currently one contact-free approach is performing stroboscopic measurements using an infrared sensor. The data acquisition is triggered so that the image is taken once per revolution. This leads to a huge loss of information on the majority of the movement and to motion blur. The objective of this research is showing the potential of using an optomechanical image derotator together with a thermographic camera. The derotator follows the rotation of the measurement object so that quasi-stationary thermal images during motion can be acquired by the infrared sensor. Unlike conventional derotators which use a glass prism to achieve this effect, the derotator within this work is equipped with a sophisticated reflector assembly. These reflectors are made of aluminum to transfer infrared radiation emitted by the rotating object. Because of the resulting stationary thermal image, the operation can be monitored continuously even for fast-rotating objects. The field of view can also be set to a small off-axis region of interest which then can be investigated with higher resolution or frame rate. To depict the potential of this approach, thermographic measurements on a rolling bearings in different operating states are presented.

A framework for developing objective and measurable recovery criteria for threatened and endangered species.

PubMed

Himes Boor, Gina K

2014-02-01

For species listed under the U.S. Endangered Species Act (ESA), the U.S. Fish and Wildlife Service and National Marine Fisheries Service are tasked with writing recovery plans that include "objective, measurable criteria" that define when a species is no longer at risk of extinction, but neither the act itself nor agency guidelines provide an explicit definition of objective, measurable criteria. Past reviews of recovery plans, including one published in 2012, show that many criteria lack quantitative metrics with clear biological rationale and are not meeting the measureable and objective mandate. I reviewed how objective, measureable criteria have been defined implicitly and explicitly in peer-reviewed literature, the ESA, other U.S. statutes, and legal decisions. Based on a synthesis of these sources, I propose the following 6 standards be used as minimum requirements for objective, measurable criteria: contain a quantitative threshold with calculable units, stipulate a timeframe over which they must be met, explicitly define the spatial extent or population to which they apply, specify a sampling procedure that includes sample size, specify a statistical significance level, and include justification by providing scientific evidence that the criteria define a species whose extinction risk has been reduced to the desired level. To meet these 6 standards, I suggest that recovery plans be explicitly guided by and organized around a population viability modeling framework even if data or agency resources are too limited to complete a viability model. When data and resources are available, recovery criteria can be developed from the population viability model results, but when data and resources are insufficient for model implementation, extinction risk thresholds can be used as criteria. A recovery-planning approach centered on viability modeling will also yield appropriately focused data-acquisition and monitoring plans and will facilitate a seamless transition

No Measured Effect of a Familiar Contextual Object on Color Constancy.

PubMed

Kanematsu, Erika; Brainard, David H

2014-08-01

Some familiar objects have a typical color, such as the yellow of a banana. The presence of such objects in a scene is a potential cue to the scene illumination, since the light reflected from them should on average be consistent with their typical surface reflectance. Although there are many studies on how the identity of an object affects how its color is perceived, little is known about whether the presence of a familiar object in a scene helps the visual system stabilize the color appearance of other objects with respect to changes in illumination. We used a successive color matching procedure in three experiments designed to address this question. Across the experiments we studied a total of 6 subjects (2 in Experiment 1, 3 in Experiment 2, and 4 in Experiment 3) with partial overlap of subjects between experiments. We compared measured color constancy across conditions in which a familiar object cue to the illuminant was available with conditions in which such a cue was not present. Overall, our results do not reveal a reliable improvement in color constancy with the addition of a familiar object to a scene. An analysis of the experimental power of our data suggests that if there is such an effect, it is small: less than approximately a change of 0.09 in a constancy index where an absence of constancy corresponds to an index value of 0 and perfect constancy corresponds to an index value of 1.

No Measured Effect of a Familiar Contextual Object on Color Constancy

PubMed Central

Kanematsu, Erika; Brainard, David H.

2013-01-01

Some familiar objects have a typical color, such as the yellow of a banana. The presence of such objects in a scene is a potential cue to the scene illumination, since the light reflected from them should on average be consistent with their typical surface reflectance. Although there are many studies on how the identity of an object affects how its color is perceived, little is known about whether the presence of a familiar object in a scene helps the visual system stabilize the color appearance of other objects with respect to changes in illumination. We used a successive color matching procedure in three experiments designed to address this question. Across the experiments we studied a total of 6 subjects (2 in Experiment 1, 3 in Experiment 2, and 4 in Experiment 3) with partial overlap of subjects between experiments. We compared measured color constancy across conditions in which a familiar object cue to the illuminant was available with conditions in which such a cue was not present. Overall, our results do not reveal a reliable improvement in color constancy with the addition of a familiar object to a scene. An analysis of the experimental power of our data suggests that if there is such an effect, it is small: less than approximately a change of 0.09 in a constancy index where an absence of constancy corresponds to an index value of 0 and perfect constancy corresponds to an index value of 1. PMID:25313267

Validity of self-reported solar UVR exposure compared with objectively measured UVR exposure.

PubMed

Glanz, Karen; Gies, Peter; O'Riordan, David L; Elliott, Tom; Nehl, Eric; McCarty, Frances; Davis, Erica

2010-12-01

Reliance on verbal self-report of solar exposure in skin cancer prevention and epidemiologic studies may be problematic if self-report data are not valid due to systematic errors in recall, social desirability bias, or other reasons. This study examines the validity of self-reports of exposure to ultraviolet radiation (UVR) compared to objectively measured exposure among children and adults in outdoor recreation settings in 4 regions of the United States. Objective UVR exposures of 515 participants were measured using polysulfone film badge UVR dosimeters on 2 days. The same subjects provided self-reported UVR exposure data on surveys and 4-day sun exposure diaries, for comparison to their objectively measured exposure. Dosimeter data showed that lifeguards had the greatest UVR exposure (24.5% of weekday ambient UVR), children the next highest exposures (10.3% ambient weekday UVR), and parents had the lowest (6.6% ambient weekday UVR). Similar patterns were observed in self-report data. Correlations between diary reports and dosimeter findings were fair to good and were highest for lifeguards (r = 0.38-0.57), followed by parents (r = 0.28-0.29) and children (r = 0.18-0.34). Correlations between survey and diary measures were moderate to good for lifeguards (r = 0.20-0.54) and children (r = 0.35-0.53). This is the largest study of its kind to date, and supports the utility of self-report measures of solar UVR exposure. Overall, self-reports of sun exposure produce valid measures of UVR exposure among parents, children, and lifeguards who work outdoors. ©2010 AACR.

[Influence of object material and inter-trial interval on novel object recognition test in mice].

PubMed

Li, Sheng-jian; Huang, Zhu-yan; Ye, Yi-lu; Yu, Yue-ping; Zhang, Wei-ping; Wei, Er-qing; Zhang, Qi

2014-05-01

To investigate the efficacy of novel object recognition (NOR) test in assessment of learning and memory ability in ICR mice in different experimental conditions. One hundred and thirty male ICR mice were randomly divided into 10 groups: 4 groups for different inter-trial intervals (ITI: 10 min, 90 min, 4 h, 24 h), 4 groups for different object materials (wood-wood, plastic-plastic, plastic-wood, wood-plastic) and 2 groups for repeated test (measured once a day or every 3 days, totally three times in each group). The locomotor tracks in the open field were recorded. The amount of time spent exploring the novel and familiar objects, the discrimination ratio (DR) and the discrimination index (DI) were analyzed. Compared with familiar object, DR and DI of novel object were both increased at ITI of 10 min and 90 min (P<0.01). Exploring time, DR and DI were greatly influenced by different object materials. DR and DI remained stable by using identical object material. NOR test could be done repeatedly in the same batch of mice. NOR test can be used to assess the learning and memory ability in mice at shorter ITI and with identical material. It can be done repeatedly.

Real-time object recognition in multidimensional images based on joined extended structural tensor and higher-order tensor decomposition methods

NASA Astrophysics Data System (ADS)

Cyganek, Boguslaw; Smolka, Bogdan

2015-02-01

In this paper a system for real-time recognition of objects in multidimensional video signals is proposed. Object recognition is done by pattern projection into the tensor subspaces obtained from the factorization of the signal tensors representing the input signal. However, instead of taking only the intensity signal the novelty of this paper is first to build the Extended Structural Tensor representation from the intensity signal that conveys information on signal intensities, as well as on higher-order statistics of the input signals. This way the higher-order input pattern tensors are built from the training samples. Then, the tensor subspaces are built based on the Higher-Order Singular Value Decomposition of the prototype pattern tensors. Finally, recognition relies on measurements of the distance of a test pattern projected into the tensor subspaces obtained from the training tensors. Due to high-dimensionality of the input data, tensor based methods require high memory and computational resources. However, recent achievements in the technology of the multi-core microprocessors and graphic cards allows real-time operation of the multidimensional methods as is shown and analyzed in this paper based on real examples of object detection in digital images.

Versatile all-digital time interval measuring system

NASA Astrophysics Data System (ADS)

Vyhlidal, David; Cech, Miroslav

2011-06-01

This paper describes a design and performance of a versatile all-digital time interval measuring system. The measurement method is based on an interpolation principle. In this principle the time interval is first roughly digitized by a coarse counter driven by a high stability reference clock and the fractions between the clock periods are measured by two Time-to-Digital Converter chips TDC-GPX manufactured by Acam messelectronic. Control circuits allow programmable customization of the system to satisfy many applications such as laser range finding, event counting, or time-of-flight measurements in various physics experiments. The system has two reference clocks inputs and two independent channels for measuring start and stop events. Only one 40 MHz reference is required for the measurement. The second reference can be, for example, 1 PPS (Pulse per Second) signal from a GPS (Global Positioning System) to time tag events. Time intervals are measured using the highest resolution mode of the TDC-GPX chips. The resolution of each chip is software programmable and is PLL (Phase Locked Loop) stabilized against temperature and voltage variations. The system can achieve a timing resolution better than 15 ps rms with up to 90 kHz repetition rate. The time interval measurement range is from 0 ps up to 1 second. The power consumption of the whole system is 18 W including an embedded computer board and an LCD (Liquid Crystal Display) screen. The embedded computer controls the whole system, collects and evaluates measurement data and with the display provides a user interface. The system is implemented using commercially available components.

Non-destructive 3D shape measurement of transparent and black objects with thermal fringes

NASA Astrophysics Data System (ADS)

Brahm, Anika; Rößler, Conrad; Dietrich, Patrick; Heist, Stefan; Kühmstedt, Peter; Notni, Gunther

2016-05-01

Fringe projection is a well-established optical method for the non-destructive contactless three-dimensional (3D) measurement of object surfaces. Typically, fringe sequences in the visible wavelength range (VIS) are projected onto the surfaces of objects to be measured and are observed by two cameras in a stereo vision setup. The reconstruction is done by finding corresponding pixels in both cameras followed by triangulation. Problems can occur if the properties of some materials disturb the measurements. If the objects are transparent, translucent, reflective, or strongly absorbing in the VIS range, the projected patterns cannot be recorded properly. To overcome these challenges, we present a new alternative approach in the infrared (IR) region of the electromagnetic spectrum. For this purpose, two long-wavelength infrared (LWIR) cameras (7.5 - 13 μm) are used to detect the emitted heat radiation from surfaces which is induced by a pattern projection unit driven by a CO2 laser (10.6 μm). Thus, materials like glass or black objects, e.g. carbon fiber materials, can be measured non-destructively without the need of any additional paintings. We will demonstrate the basic principles of this heat pattern approach and show two types of 3D systems based on a freeform mirror and a GOBO wheel (GOes Before Optics) projector unit.

Balancing Exploration, Uncertainty Representation and Computational Time in Many-Objective Reservoir Policy Optimization

NASA Astrophysics Data System (ADS)

Zatarain-Salazar, J.; Reed, P. M.; Quinn, J.; Giuliani, M.; Castelletti, A.

2016-12-01

As we confront the challenges of managing river basin systems with a large number of reservoirs and increasingly uncertain tradeoffs impacting their operations (due to, e.g. climate change, changing energy markets, population pressures, ecosystem services, etc.), evolutionary many-objective direct policy search (EMODPS) solution strategies will need to address the computational demands associated with simulating more uncertainties and therefore optimizing over increasingly noisy objective evaluations. Diagnostic assessments of state-of-the-art many-objective evolutionary algorithms (MOEAs) to support EMODPS have highlighted that search time (or number of function evaluations) and auto-adaptive search are key features for successful optimization. Furthermore, auto-adaptive MOEA search operators are themselves sensitive to having a sufficient number of function evaluations to learn successful strategies for exploring complex spaces and for escaping from local optima when stagnation is detected. Fortunately, recent parallel developments allow coordinated runs that enhance auto-adaptive algorithmic learning and can handle scalable and reliable search with limited wall-clock time, but at the expense of the total number of function evaluations. In this study, we analyze this tradeoff between parallel coordination and depth of search using different parallelization schemes of the Multi-Master Borg on a many-objective stochastic control problem. We also consider the tradeoff between better representing uncertainty in the stochastic optimization, and simplifying this representation to shorten the function evaluation time and allow for greater search. Our analysis focuses on the Lower Susquehanna River Basin (LSRB) system where multiple competing objectives for hydropower production, urban water supply, recreation and environmental flows need to be balanced. Our results provide guidance for balancing exploration, uncertainty, and computational demands when using the EMODPS

Association of Objectively Measured Physical Activity and Metabolic Syndrome Among US Adults With Osteoarthritis.

PubMed

Liu, Shao-Hsien; Waring, Molly E; Eaton, Charles B; Lapane, Kate L

2015-10-01

To investigate the association between objectively measured physical activity and metabolic syndrome among adults with osteoarthritis (OA). Using cross-sectional data from the 2003-2006 National Health and Nutrition Examination Survey, we identified 566 adults with OA with available accelerometer data assessed using Actigraph AM-7164 and measurements necessary to determine metabolic syndrome by the Adult Treatment Panel III. Analysis of variance was conducted to examine the association between continuous variables in each activity level and metabolic syndrome components. Logistic models estimated the relationship of quartile of daily minutes of different physical activity levels to odds of metabolic syndrome adjusted for socioeconomic and health factors. Among persons with OA, most were women average age of 62.1 years and average disease duration of 12.9 years. Half of adults with OA had metabolic syndrome (51.0%; 95% confidence interval [95% CI] 44.2%-57.8%), and only 9.6% engaged in the recommended 150 minutes per week of moderate/vigorous physical activity. Total sedentary time was associated with higher rates of metabolic syndrome and its components, while light and objectively measured moderate/vigorous physical activity was inversely associated with metabolic syndrome and its components. Higher levels of light activity were associated with lower prevalence of metabolic syndrome (quartile 4 versus quartile 1: adjusted odds ratio 0.45, 95% CI 0.24-0.84, P for linear trend < 0.005). Most US adults with OA are sedentary. Increased daily minutes in physical activity, especially in light intensity, is more likely to be associated with decreasing prevalence of metabolic syndrome among persons with OA. © 2015, American College of Rheumatology.

Objects of attention, objects of perception.

PubMed

Avrahami, J

1999-11-01

Four experiments were conducted, to explore the notion of objects in perception. Taking as a starting point the effects of display content on rapid attention transfer and manipulating curvature, closure, and processing time, a link between objects of attention and objects of perception is proposed. In Experiment 1, a number of parallel, equally spaced, straight lines facilitated attention transfer along the lines, relative to transfer across the lines. In Experiment 2, with curved, closed-contour shapes, no "same-object" facilitation was observed. However, when a longer time interval was provided, in Experiment 3, a same-object advantage started to emerge. In Experiment 4, using the same curved shapes but in a non-speeded distance estimation task, a strong effect of objects was observed. It is argued that attention transfer is facilitated by line tracing but that line tracing is encouraged by objects.

Using rate of divergence as an objective measure to differentiate between voice signal types based on the amount of disorder in the signal

PubMed Central

Calawerts, William M; Lin, Liyu; Sprott, JC; Jiang, Jack J

2016-01-01

Objective/Hypothesis The purpose of this paper is to introduce rate of divergence as an objective measure to differentiate between the four voice types based on the amount of disorder present in a signal. We hypothesized that rate of divergence would provide an objective measure that can quantify all four voice types. Study Design 150 acoustic voice recordings were randomly selected and analyzed using traditional perturbation, nonlinear, and rate of divergence analysis methods. ty Methods We developed a new parameter, rate of divergence, which uses a modified version of Wolf’s algorithm for calculating Lyapunov exponents of a system. The outcome of this calculation is not a Lyapunov exponent, but rather a description of the divergence of two nearby data points for the next three points in the time series, followed in three time delayed embedding dimensions. This measure was compared to currently existing perturbation and nonlinear dynamic methods of distinguishing between voice signals. Results There was a direct relationship between voice type and rate of divergence. This calculation is especially effective at differentiating between type 3 and type 4 voices (p<0.001), and is equally effective at differentiating type 1, type 2, and type 3 signals as currently existing methods. Conclusion The rate of divergence calculation introduced is an objective measure that can be used to distinguish between all four voice types based on amount of disorder present, leading to quicker and more accurate voice typing as well as an improved understanding of the nonlinear dynamics involved in phonation. PMID:26920858

Objective measurement of paranormal belief: a rebuttal to Vitulli.

PubMed

Lange, R; Irwin, H J; Houran, J

2001-06-01

Effects of age and sex in paranormal belief remain controversial because issues of scaling and differential item function are not given due attention. Therefore, in response to the recent debate between Irwin and Vitulli, these issues are reviewed and validated as crucial approaches for obtaining an objective measure of paranormal belief. A Rasch version of Tobacyk's Paranormal Belief Scale has been developed, but research with this scale suggests that--contrary to past literature and recently refined studies--age and sex are neither consistent nor crucial factors mediating paranormal belief.

Gist in time: scene semantics and structure enhance recall of searched objects

PubMed Central

Wolfe, Jeremy M.; Võ, Melissa L.-H.

2016-01-01

Previous work has shown that recall of objects that are incidentally encountered as targets in visual search is better than recall of objects that have been intentionally memorized (Draschkow, Wolfe & Võ, 2014). However, this counter-intuitive result is not seen when these tasks are performed with non-scene stimuli. The goal of the current paper is to determine what features of search in a scene contribute to higher recall rates when compared to a memorization task. In each of four experiments, we compare the free recall rate for target objects following a search to the rate following a memorization task. Across the experiments, the stimuli include progressively more scene-related information. Experiment 1 provides the spatial relations between objects. Experiment 2 adds relative size and depth of objects. Experiments 3 and 4 include scene layout and semantic information. We find that search leads to better recall than explicit memorization in cases where scene layout and semantic information are present, as long as the participant has ample time (2500ms) to integrate this information with knowledge about the target object (Exp. 4). These results suggest that the integration of scene and target information not only leads to more efficient search, but can also contribute to stronger memory representations than intentional memorization. PMID:27270227

Measuring the electronic transport properties of individual nano-objects under high pressures

NASA Astrophysics Data System (ADS)

Caillier, C.; Ayari, A.; Le Floch, S.; Féret, H.; Guiraud, G.; San-Miguel, A.

2011-09-01

We describe a setup to carry out electronic transport measurements under high pressures on individual nano-objects. It is based on a home-automated three-stage gas compressor working with argon or helium up to 1 GPa. The setup was successfully tested on contacted individual nanotubes, for which we evidence strong evolutions of the transport properties. These evolutions are related to fundamental issues such as the modification of the nano-object contact resistance, the pressure-induced modification of the nano-object geometry or pressure-induced changes in the intrinsic electronic properties of the nanosystem. A cryostat has also been adapted to the pressure cell, allowing combined pressure and temperature experiments down to 12 K.

Single Object & Time Series Spectroscopy with JWST NIRCam

NASA Technical Reports Server (NTRS)

Greene, Tom; Schlawin, Everett A.

2017-01-01

JWST will enable high signal-to-noise spectroscopic observations of the atmospheres of transiting planets with high sensitivity at wavelengths that are inaccessible with HST or other existing facilities. We plan to exploit this by measuring abundances, chemical compositions, cloud properties, and temperature-pressure parameters of a set of mostly warm (T 600 - 1200 K) and low mass (14 -200 Earth mass) planets in our guaranteed time program. These planets are expected to have significant molecular absorptions of H2O, CH4, CO2, CO, and other molecules that are key for determining these parameters and illuminating how and where the planets formed. We describe how we will use the NIRCam grisms to observe slitless transmission and emission spectra of these planets over 2.4 - 5.0 microns wavelength and how well these observations can measure our desired parameters. This will include how we set integration times, exposure parameters, and obtain simultaneous shorter wavelength images to track telescope pointing and stellar variability. We will illustrate this with specific examples showing model spectra, simulated observations, expected information retrieval results, completed Astronomer's Proposal Tools observing templates, target visibility, and other considerations.

Comparison of an objective method of measuring bulbar redness to the use of traditional grading scales.

PubMed

Sorbara, Luigina; Simpson, Trefford; Duench, Stephanie; Schulze, Marc; Fonn, Desmond

2007-03-01

The primary objective was to compare measures of bulbar redness objectively using a photometric method with standard grading methods. Measures of redness were made on 24 participants wearing a silicone hydrogel contact lens in one eye for overnight wear. This report compares hyperaemia after 1 week of daily wear (baseline) with redness measured after 6 months of overnight wear. A new method of objectively measuring bulbar conjunctival redness was performed using the Spectrascan650 Photometer by Photo Research under fixed illumination. Photometric measures in CIEu(*) chromaticity values involve the measurement of chromaticity, a physical analogue of redness, greenness and blueness in the image. This method was validated in Part 1 of the study using repeated measurements on the photographic CCLRU scale. In Part 2 of the study, the photographic grading scale (CCLRU) from 0 (none) to 100 (extreme) was used to make the comparison. Part 1 indicated that the photometer provides a repeatable and reliable measure of bulbar redness (CCC=0.989). A moderately strong and significant correlation was found between the CIEu(*) chromaticity values and the analogue data (R=0.795, p=0.000) at each measurement session (from baseline to 1 day, 1 week, and 1, 3 and 6 months of overnight wear). This new standardized and objective method of measuring bulbar redness has great potential to replace subjective grading scales, especially with multi-centre studies, where variability between investigators occurs. This method may also detect smaller changes between visits or between eyes.

The FIELDS Instrument Suite on MMS: Scientific Objectives, Measurements, and Data Products

NASA Astrophysics Data System (ADS)

Torbert, R. B.; Russell, C. T.; Magnes, W.; Ergun, R. E.; Lindqvist, P.-A.; Le Contel, O.; Vaith, H.; Macri, J.; Myers, S.; Rau, D.; Needell, J.; King, B.; Granoff, M.; Chutter, M.; Dors, I.; Olsson, G.; Khotyaintsev, Y. V.; Eriksson, A.; Kletzing, C. A.; Bounds, S.; Anderson, B.; Baumjohann, W.; Steller, M.; Bromund, K.; Le, Guan; Nakamura, R.; Strangeway, R. J.; Leinweber, H. K.; Tucker, S.; Westfall, J.; Fischer, D.; Plaschke, F.; Porter, J.; Lappalainen, K.

2016-03-01

The FIELDS instrumentation suite on the Magnetospheric Multiscale (MMS) mission provides comprehensive measurements of the full vector magnetic and electric fields in the reconnection regions investigated by MMS, including the dayside magnetopause and the night-side magnetotail acceleration regions out to 25 Re. Six sensors on each of the four MMS spacecraft provide overlapping measurements of these fields with sensitive cross-calibrations both before and after launch. The FIELDS magnetic sensors consist of redundant flux-gate magnetometers (AFG and DFG) over the frequency range from DC to 64 Hz, a search coil magnetometer (SCM) providing AC measurements over the full whistler mode spectrum expected to be seen on MMS, and an Electron Drift Instrument (EDI) that calibrates offsets for the magnetometers. The FIELDS three-axis electric field measurements are provided by two sets of biased double-probe sensors (SDP and ADP) operating in a highly symmetric spacecraft environment to reduce significantly electrostatic errors. These sensors are complemented with the EDI electric measurements that are free from all local spacecraft perturbations. Cross-calibrated vector electric field measurements are thus produced from DC to 100 kHz, well beyond the upper hybrid resonance whose frequency provides an accurate determination of the local electron density. Due to its very large geometric factor, EDI also provides very high time resolution (˜1 ms) ambient electron flux measurements at a few selected energies near 1 keV. This paper provides an overview of the FIELDS suite, its science objectives and measurement requirements, and its performance as verified in calibration and cross-calibration procedures that result in anticipated errors less than 0.1 nT in B and 0.5 mV/m in E. Summaries of data products that result from FIELDS are also described, as well as algorithms for cross-calibration. Details of the design and performance characteristics of AFG/DFG, SCM, ADP, SDP, and EDI

Childhood socioeconomic position and objectively measured physical capability levels in adulthood: a systematic review and meta-analysis.

PubMed

Birnie, Kate; Cooper, Rachel; Martin, Richard M; Kuh, Diana; Sayer, Avan Aihie; Alvarado, Beatriz E; Bayer, Antony; Christensen, Kaare; Cho, Sung-il; Cooper, Cyrus; Corley, Janie; Craig, Leone; Deary, Ian J; Demakakos, Panayotes; Ebrahim, Shah; Gallacher, John; Gow, Alan J; Gunnell, David; Haas, Steven; Hemmingsson, Tomas; Inskip, Hazel; Jang, Soong-nang; Noronha, Kenya; Osler, Merete; Palloni, Alberto; Rasmussen, Finn; Santos-Eggimann, Brigitte; Spagnoli, Jacques; Starr, John; Steptoe, Andrew; Syddall, Holly; Tynelius, Per; Weir, David; Whalley, Lawrence J; Zunzunegui, Maria Victoria; Ben-Shlomo, Yoav; Hardy, Rebecca

2011-01-26

Grip strength, walking speed, chair rising and standing balance time are objective measures of physical capability that characterise current health and predict survival in older populations. Socioeconomic position (SEP) in childhood may influence the peak level of physical capability achieved in early adulthood, thereby affecting levels in later adulthood. We have undertaken a systematic review with meta-analyses to test the hypothesis that adverse childhood SEP is associated with lower levels of objectively measured physical capability in adulthood. Relevant studies published by May 2010 were identified through literature searches using EMBASE and MEDLINE. Unpublished results were obtained from study investigators. Results were provided by all study investigators in a standard format and pooled using random-effects meta-analyses. 19 studies were included in the review. Total sample sizes in meta-analyses ranged from N = 17,215 for chair rise time to N = 1,061,855 for grip strength. Although heterogeneity was detected, there was consistent evidence in age adjusted models that lower childhood SEP was associated with modest reductions in physical capability levels in adulthood: comparing the lowest with the highest childhood SEP there was a reduction in grip strength of 0.13 standard deviations (95% CI: 0.06, 0.21), a reduction in mean walking speed of 0.07 m/s (0.05, 0.10), an increase in mean chair rise time of 6% (4%, 8%) and an odds ratio of an inability to balance for 5s of 1.26 (1.02, 1.55). Adjustment for the potential mediating factors, adult SEP and body size attenuated associations greatly. However, despite this attenuation, for walking speed and chair rise time, there was still evidence of moderate associations. Policies targeting socioeconomic inequalities in childhood may have additional benefits in promoting the maintenance of independence in later life.

Childhood Socioeconomic Position and Objectively Measured Physical Capability Levels in Adulthood: A Systematic Review and Meta-Analysis

PubMed Central

Martin, Richard M.; Kuh, Diana; Sayer, Avan Aihie; Alvarado, Beatriz E.; Bayer, Antony; Christensen, Kaare; Cho, Sung-il; Cooper, Cyrus; Corley, Janie; Craig, Leone; Deary, Ian J.; Demakakos, Panayotes; Ebrahim, Shah; Gallacher, John; Gow, Alan J.; Gunnell, David; Haas, Steven; Hemmingsson, Tomas; Inskip, Hazel; Jang, Soong-nang; Noronha, Kenya; Osler, Merete; Palloni, Alberto; Rasmussen, Finn; Santos-Eggimann, Brigitte; Spagnoli, Jacques; Starr, John; Steptoe, Andrew; Syddall, Holly; Tynelius, Per; Weir, David; Whalley, Lawrence J.; Zunzunegui, Maria Victoria; Ben-Shlomo, Yoav; Hardy, Rebecca

2011-01-01

Background Grip strength, walking speed, chair rising and standing balance time are objective measures of physical capability that characterise current health and predict survival in older populations. Socioeconomic position (SEP) in childhood may influence the peak level of physical capability achieved in early adulthood, thereby affecting levels in later adulthood. We have undertaken a systematic review with meta-analyses to test the hypothesis that adverse childhood SEP is associated with lower levels of objectively measured physical capability in adulthood. Methods and Findings Relevant studies published by May 2010 were identified through literature searches using EMBASE and MEDLINE. Unpublished results were obtained from study investigators. Results were provided by all study investigators in a standard format and pooled using random-effects meta-analyses. 19 studies were included in the review. Total sample sizes in meta-analyses ranged from N = 17,215 for chair rise time to N = 1,061,855 for grip strength. Although heterogeneity was detected, there was consistent evidence in age adjusted models that lower childhood SEP was associated with modest reductions in physical capability levels in adulthood: comparing the lowest with the highest childhood SEP there was a reduction in grip strength of 0.13 standard deviations (95% CI: 0.06, 0.21), a reduction in mean walking speed of 0.07 m/s (0.05, 0.10), an increase in mean chair rise time of 6% (4%, 8%) and an odds ratio of an inability to balance for 5s of 1.26 (1.02, 1.55). Adjustment for the potential mediating factors, adult SEP and body size attenuated associations greatly. However, despite this attenuation, for walking speed and chair rise time, there was still evidence of moderate associations. Conclusions Policies targeting socioeconomic inequalities in childhood may have additional benefits in promoting the maintenance of independence in later life. PMID:21297868

The Available Time Scale: Measuring Foster Parents' Available Time to Foster

ERIC Educational Resources Information Center

Cherry, Donna J.; Orme, John G.; Rhodes, Kathryn W.

2009-01-01

This article presents a new measure of available time specific to fostering, the Available Time Scale (ATS). It was tested with a national sample of 304 foster mothers and is designed to measure the amount of time foster parents are able to devote to fostering activities. The ATS has excellent reliability, and good support exists for its validity.…

The use of objective measurements in the evaluation of therapy programs

NASA Technical Reports Server (NTRS)

Chaplin, H.

1974-01-01

The importance of objective measurements is discussed as a means of assessing the efficacy of physical and occupational therapy programs applied to patients recovering from neurological diseases. Considered are three primary categories of neurologically injured patients: patients with hemiplegia, patients with spinal cord injuries, and the heterogeneous group of cerebral palsy patients.

An assembly process model based on object-oriented hierarchical time Petri Nets

NASA Astrophysics Data System (ADS)

Wang, Jiapeng; Liu, Shaoli; Liu, Jianhua; Du, Zenghui

2017-04-01

In order to improve the versatility, accuracy and integrity of the assembly process model of complex products, an assembly process model based on object-oriented hierarchical time Petri Nets is presented. A complete assembly process information model including assembly resources, assembly inspection, time, structure and flexible parts is established, and this model describes the static and dynamic data involved in the assembly process. Through the analysis of three-dimensional assembly process information, the assembly information is hierarchically divided from the whole, the local to the details and the subnet model of different levels of object-oriented Petri Nets is established. The communication problem between Petri subnets is solved by using message database, and it reduces the complexity of system modeling effectively. Finally, the modeling process is presented, and a five layer Petri Nets model is established based on the hoisting process of the engine compartment of a wheeled armored vehicle.

Time-of-Flight Tip-Clearance Measurements

NASA Technical Reports Server (NTRS)

Dhadwal, H. S.; Kurkov, A. P.; Janetzke, D. C.

1999-01-01

In this paper a time-of-flight probe system incorporating the two integrated fiber optic probes which are tilted equally relative to the probe holder centerline, is applied for the first time to measure the tip clearance of an advanced fan prototype. Tip clearance is largely independent of the signal amplitude and it relies on timing measurement. This work exposes optical effects associated with the fan blade stagger angle that were absent during the original spin-rig experiment on the zero stagger rotor. Individual blade tip clearances were measured with accuracy of +/- 127-mm (+/- 0.005-in). Probe features are discussed and improvements to the design are suggested.

Real-time object detection, tracking and occlusion reasoning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Divakaran, Ajay; Yu, Qian; Tamrakar, Amir

A system for object detection and tracking includes technologies to, among other things, detect and track moving objects, such as pedestrians and/or vehicles, in a real-world environment, handle static and dynamic occlusions, and continue tracking moving objects across the fields of view of multiple different cameras.

Associations of objectively measured sitting and standing with low-back pain intensity: a 6-month follow-up of construction and healthcare workers.

PubMed

Lunde, Lars-Kristian; Koch, Markus; Knardahl, Stein; Veiersted, Kaj Bo

2017-05-01

Objectives This study aimed to determine the associations between objectively measured sitting and standing duration and intensity of low-back pain (LBP) among Norwegian construction and healthcare workers. Methods One-hundred and twenty-four workers wore two accelerometers for 3-4 consecutive days, during work and leisure. Minutes of sitting and standing was calculated from accelerometer data. We obtained self-reported LBP intensity (0-3) at the time of objective measurement and after six months. We examined associations with linear mixed models and presented results per 100 minutes. Results For healthcare workers, the duration of sitting during work [β= -0.33, 95% confidence interval (95% CI) -0.55- -0.10] and during full-day (work + leisure) (β= -0.21, 95% CI -0.38- -0.04) was associated with baseline LBP intensity. Furthermore, minutes of sitting at work (β=-0.35, 95% CI -0.57- -0.13) and during the full day (β=-0.20, 95% CI -0.37- -0.04) were significantly associated with LBP intensity at six months. Associations were attenuated when adjusting for work-related mechanical and psychosocial covariates and objectively measured exposure during leisure time. No significant associations between sitting and LBP intensity were found for construction workers. Standing at work was not consistently associated with LBP intensity at baseline or after six months for any work sector. Conclusions This study suggests that a long duration of sitting at work is associated with lower levels of LBP intensity among healthcare workers. Standing duration had no consistent associations with LBP intensity.

Effects of Objective 3-Dimensional Measures of Facial Shape and Symmetry on Perceptions of Facial Attractiveness.

PubMed

Hatch, Cory D; Wehby, George L; Nidey, Nichole L; Moreno Uribe, Lina M

2017-09-01

Meeting patient desires for enhanced facial esthetics requires that providers have standardized and objective methods to measure esthetics. The authors evaluated the effects of objective 3-dimensional (3D) facial shape and asymmetry measurements derived from 3D facial images on perceptions of facial attractiveness. The 3D facial images of 313 adults in Iowa were digitized with 32 landmarks, and objective 3D facial measurements capturing symmetric and asymmetric components of shape variation, centroid size, and fluctuating asymmetry were obtained from the 3D coordinate data using geo-morphometric analyses. Frontal and profile images of study participants were rated for facial attractiveness by 10 volunteers (5 women and 5 men) on a 5-point Likert scale and a visual analog scale. Multivariate regression was used to identify the effects of the objective 3D facial measurements on attractiveness ratings. Several objective 3D facial measurements had marked effects on attractiveness ratings. Shorter facial heights with protrusive chins, midface retrusion, faces with protrusive noses and thin lips, flat mandibular planes with deep labiomental folds, any cants of the lip commissures and floor of the nose, larger faces overall, and increased fluctuating asymmetry were rated as significantly (P < .001) less attractive. Perceptions of facial attractiveness can be explained by specific 3D measurements of facial shapes and fluctuating asymmetry, which have important implications for clinical practice and research. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Subjective and objective measurements of postoperative pain in cats.

PubMed

Cambridge, A J; Tobias, K M; Newberry, R C; Sarkar, D K

2000-09-01

To evaluate the ability of various subjective and objective measurements to determine the presence and degree of postoperative pain in cats. Randomized controlled prospective clinical study. 18 healthy client-owned cats. Cats were randomly assigned to 3 groups of 6: control, tenectomy, and onychectomy. Jugular catheters were placed the day prior to surgery. All surgeries were performed by the same surgeon, and all observations were made by the same blinded trained observer. One hour prior to surgery and at assigned intervals for 36 hours after surgery, heart rate, respiratory rate, and rectal temperature were measured. Scores were assigned for 3 interaction responses, including response to palpation, by use of simple descriptive scales, and to 2 pain assessments by use of visual analogue scales. Blood was collected to measure plasma beta-endorphin and cortisol concentrations. Butorphanol was administered to all cats before surgery and to any cat subjectively assessed to be experiencing pain after surgery. Only visual analogue scale scores and response to palpation scores differed significantly between control and surgical groups. Determination of the presence of pain in cats can be made on the basis of observation and interaction by a trained observer. Physiologic measurements, including plasma cortisol and beta-endorphin concentrations, did not differentiate between control cats and cats that underwent surgery.

Object-based attention: strength of object representation and attentional guidance.

PubMed

Shomstein, Sarah; Behrmann, Marlene

2008-01-01

Two or more features belonging to a single object are identified more quickly and more accurately than are features belonging to different objects--a finding attributed to sensory enhancement of all features belonging to an attended or selected object. However, several recent studies have suggested that this "single-object advantage" may be a product of probabilistic and configural strategic prioritizations rather than of object-based perceptual enhancement per se, challenging the underlying mechanism that is thought to give rise to object-based attention. In the present article, we further explore constraints on the mechanisms of object-based selection by examining the contribution of the strength of object representations to the single-object advantage. We manipulated factors such as exposure duration (i.e., preview time) and salience of configuration (i.e., objects). Varying preview time changes the magnitude of the object-based effect, so that if there is ample time to establish an object representation (i.e., preview time of 1,000 msec), then both probability and configuration (i.e., objects) guide attentional selection. If, however, insufficient time is provided to establish a robust object-based representation, then only probabilities guide attentional selection. Interestingly, at a short preview time of 200 msec, when the two objects were sufficiently different from each other (i.e., different colors), both configuration and probability guided attention selection. These results suggest that object-based effects can be explained both in terms of strength of object representations (established at longer exposure durations and by pictorial cues) and probabilistic contingencies in the visual environment.

Associations between objectively measured physical activity and academic attainment in adolescents from a UK cohort

PubMed Central

Booth, J N; Leary, S D; Joinson, C; Ness, A R; Tomporowski, P D; Boyle, J M; Reilly, J J

2014-01-01

Background To test for cross-sectional (at age 11) and longitudinal associations between objectively measured free-living physical activity (PA) and academic attainment in adolescents.Method Data from 4755 participants (45% male) with valid measurement of PA (total volume and intensity) by accelerometry at age 11 from the Avon Longitudinal Study of Parents and Children (ALSPAC) was examined. Data linkage was performed with nationally administered school assessments in English, Maths and Science at ages 11, 13 and 16. Results In unadjusted models, total volume of PA predicted decreased academic attainment. After controlling for total volume of PA, percentage of time spent in moderate-vigorous intensity PA (MVPA) predicted increased performance in English assessments in both sexes, taking into account confounding variables. In Maths at 16 years, percentage of time in MVPA predicted increased performance for males (standardised β=0.11, 95% CI 0.00 to 0.22) and females (β=0.08, 95% CI 0.00 to 0.16). For females the percentage of time spent in MVPA at 11 years predicted increased Science scores at 11 and 16 years (β=0.14 (95% CI 0.03 to 0.25) and 0.14 (0.07 to 0.21), respectively). The correction for regression dilution approximately doubled the standardised β coefficients. Conclusions Findings suggest a long-term positive impact of MVPA on academic attainment in adolescence. PMID:24149097

Objective physical activity measurement in the osteoarthritis initiative: Are guidelines being met?

PubMed

Dunlop, Dorothy D; Song, Jing; Semanik, Pamela A; Chang, Rowland W; Sharma, Leena; Bathon, Joan M; Eaton, Charles B; Hochberg, Marc C; Jackson, Rebecca D; Kwoh, C Kent; Mysiw, W Jerry; Nevitt, Michael C; Hootman, Jennifer M

2011-11-01

Osteoarthritis (OA) clinical practice guidelines identify a substantial therapeutic role for physical activity, but objective information about the physical activity of this population is lacking. The aim of this study was to objectively measure levels of physical activity in adults with knee OA and report the prevalence of meeting public health physical activity guidelines. Cross-sectional accelerometry data from 1,111 adults with radiographic knee OA (49-84 years old) participating in the Osteoarthritis Initiative accelerometry monitoring ancillary study were assessed for meeting the aerobic component of the 2008 Physical Activity Guidelines for Americans (≥150 minutes/week moderate-to-vigorous-intensity activity lasting ≥10 minutes). Quantile regression was used to test median sex differences in physical activity levels. Aerobic physical activity guidelines were met by 12.9% of men and 7.7% of women with knee OA. A substantial proportion of men and women (40.1% and 56.5%, respectively) were inactive, having done no moderate-to-vigorous activity that lasted 10 minutes or more during the 7 days. Although men engaged in significantly more moderate-to-vigorous activity (average daily minutes 20.7 versus 12.3), they also spent more time in no or very-low-intensity activity than women (average daily minutes 608.2 versus 585.8). Despite substantial health benefits from physical activity, adults with knee OA were particularly inactive based on objective accelerometry monitoring. The proportions of men and women who met public health physical activity guidelines were substantially less than those previously reported based on self-reported activity in arthritis populations. These findings support intensified public health efforts to increase physical activity levels among people with knee OA. Copyright © 2011 by the American College of Rheumatology.

Measuring Time-Averaged Blood Pressure

NASA Technical Reports Server (NTRS)

Rothman, Neil S.

1988-01-01

Device measures time-averaged component of absolute blood pressure in artery. Includes compliant cuff around artery and external monitoring unit. Ceramic construction in monitoring unit suppresses ebb and flow of pressure-transmitting fluid in sensor chamber. Transducer measures only static component of blood pressure.

The Sensitivity of Derived Estimates to the Measurement Quality Objectives for Independent Variables

Treesearch

Francis A. Roesch

2005-01-01

The effect of varying the allowed measurement error for individual tree variables upon county estimates of gross cubic-foot volume was examined. Measurement Quality Objectives (MQOs) for three forest tree variables (biological identity, diameter, and height) used in individual tree gross cubic-foot volume equations were varied from the current USDA Forest Service...

The quantum measurement of time

NASA Technical Reports Server (NTRS)

Shepard, Scott R.

1994-01-01

Traditionally, in non-relativistic Quantum Mechanics, time is considered to be a parameter, rather than an observable quantity like space. In relativistic Quantum Field Theory, space and time are treated equally by reducing space to also be a parameter. Herein, after a brief review of other measurements, we describe a third possibility, which is to treat time as a directly observable quantity.

On numerical model of time-dependent processes in three-dimensional porous heat-releasing objects

NASA Astrophysics Data System (ADS)

Lutsenko, Nickolay A.

2016-10-01

The gas flows in the gravity field through porous objects with heat-releasing sources are investigated when the self-regulation of the flow rate of the gas passing through the porous object takes place. Such objects can appear after various natural or man-made disasters (like the exploded unit of the Chernobyl NPP). The mathematical model and the original numerical method, based on a combination of explicit and implicit finite difference schemes, are developed for investigating the time-dependent processes in 3D porous energy-releasing objects. The advantage of the numerical model is its ability to describe unsteady processes under both natural convection and forced filtration. The gas cooling of 3D porous objects with different distribution of heat sources is studied using computational experiment.

Gist in time: Scene semantics and structure enhance recall of searched objects.

PubMed

Josephs, Emilie L; Draschkow, Dejan; Wolfe, Jeremy M; Võ, Melissa L-H

2016-09-01

Previous work has shown that recall of objects that are incidentally encountered as targets in visual search is better than recall of objects that have been intentionally memorized (Draschkow, Wolfe, & Võ, 2014). However, this counter-intuitive result is not seen when these tasks are performed with non-scene stimuli. The goal of the current paper is to determine what features of search in a scene contribute to higher recall rates when compared to a memorization task. In each of four experiments, we compare the free recall rate for target objects following a search to the rate following a memorization task. Across the experiments, the stimuli include progressively more scene-related information. Experiment 1 provides the spatial relations between objects. Experiment 2 adds relative size and depth of objects. Experiments 3 and 4 include scene layout and semantic information. We find that search leads to better recall than explicit memorization in cases where scene layout and semantic information are present, as long as the participant has ample time (2500ms) to integrate this information with knowledge about the target object (Exp. 4). These results suggest that the integration of scene and target information not only leads to more efficient search, but can also contribute to stronger memory representations than intentional memorization. Copyright © 2016 Elsevier B.V. All rights reserved.

Objectively measured physical activity in obese women with and without migraine.

PubMed

Bond, Dale S; Thomas, J Graham; O'Leary, Kevin C; Lipton, Richard B; Peterlin, B Lee; Roth, Julie; Rathier, Lucille; Wing, Rena R

2015-09-01

The aim of this article is to cross-sectionally compare objectively measured physical activity (PA) levels and their association with migraine characteristics in obese women with and without migraine. Obese women seeking weight loss treatment were divided into migraine (n = 25) and control (n = 25) groups matched by age and body mass index (BMI). Participants wore the SenseWear Armband monitor for seven days to objectively evaluate daily light-(LPA) and moderate-to-vigorous intensity PA (MVPA). Migraine diagnosis was confirmed by a neurologist using ICHD-3-beta criteria. Migraine characteristics were tracked daily using a smartphone-based diary over a four-week period immediately preceding the objective PA assessment. Migraine participants spent 57.9 fewer minutes/day in LPA (141.1 ± 56.4 vs. 199.1 ± 87.7, p = 0.019) and 24.5 fewer minutes/day in MVPA (27.8 ± 17.0 vs. 52.3 ± 26.0, p < 0.001), compared to controls. Migraine participants reported 4.8 ± 3.1 migraine days/month (mean duration = 17.1 ± 8.9 hours; mean maximum pain severity = 6.4 ± 1.7 on a 0-10 scale). Higher BMI (p < 0.05), but not migraine characteristics, were related to lower total PA. Additionally, total objectively measured PA was not associated with how often PA was reported to exacerbate migraine attacks during the four-week diary assessment. Obese women with migraine spent nearly 1.5 hours/day less in PA compared to controls; however, lower PA was not related to migraine characteristics. Further research is needed to identify PA barriers and effective interventions in obese women with migraine. © International Headache Society 2014.

Multicentre investigation on electrically evoked compound action potential and stapedius reflex: how do these objective measures relate to implant programming parameters?

PubMed

Van Den Abbeele, Thierry; Noël-Petroff, Nathalie; Akin, Istemihan; Caner, Gül; Olgun, Levent; Guiraud, Jeanne; Truy, Eric; Attias, Josef; Raveh, Eyal; Belgin, Erol; Sennaroglu, Gonca; Basta, Dietmar; Ernst, Arneborg; Martini, Alessandro; Rosignoli, Monica; Levi, Haya; Elidan, Joseph; Benghalem, Abdelhamid; Amstutz-Montadert, Isabelle; Lerosey, Yannick; De Vel, Eddy; Dhooge, Ingeborg; Hildesheimer, Minka; Kronenberg, Jona; Arnold, Laure

2012-02-01

The aims of this study were to collect data on electrically evoked compound action potential (eCAP) and electrically evoked stapedius reflex thresholds (eSRT) in HiResolution(TM) cochlear implant (CI) users, and to explore the relationships between these objective measures and behavioural measures of comfort levels (M-levels). A prospective study on newly implanted subjects was designed. The eCAP was measured intra-operatively and at first fitting through neural response imaging (NRI), using the SoundWave(TM) fitting software. The eSRT was measured intra-operatively by visual monitoring of the stapes, using both single-electrode stimulation and speech bursts (four electrodes stimulated at the same time). Measures of M-levels were performed according to standard clinical practice and collected at first fitting, 3 and 6 months of CI use. One hundred seventeen subjects from 14 centres, all implanted unilaterally with a HiResolution CII Bionic Ear(®) or HiRes 90K(®), were included in the study. Speech burst stimulation elicited a significantly higher eSRT success rate than single-electrode stimulation, 84 vs. 64% respectively. The NRI success rate was 81% intra-operatively, significantly increasing to 96% after 6 months. Fitting guidelines were defined on the basis of a single NRI measurement. Correlations, analysis of variance, and multiple regression analysis were applied to generate a predictive model for the M-levels. Useful insights were produced into the behaviour of objective measures according to time, electrode location, and fitting parameters. They may usefully assist in programming the CI when no reliable feedback is obtained through standard behavioural procedures.

Objective measurements for grading the nasal esthetics on Basal view in individuals with secondary cleft nasal deformity.

PubMed

He, Xing; Li, Hua; Shao, Yan; Shi, Bing

2015-01-01

The purpose of this study is to ascertain objective nasal measurements from the basal view that are predictive of nasal esthetics in individuals with secondary cleft nasal deformity. Thirty-three patients who had undergone unilateral cleft lip repair were retrospectively reviewed in this study. The degree of nasal deformity was subjectively ranked by seven surgeons using standardized basal-view measurements. Nine physical objective parameters including angles and ratios were measured. Correlations and regressions between these objective and subjective measurements were then analyzed. There was high concordance in subjective measurements by different surgeons (Kendall's harmonious coefficient = W = .825, P = .006). The strongest predictive factors for nasal aesthetics were the ratio of length of nasal alar (r = .370, P = .034) and the degree of deviation of the columnar axis (r = .451, P = .008). The columellar angle had a more powerful effect in rating nasal esthetics. There was reliable concordance in subjective ranking of nasal esthetics by surgeons. Measurement of the columnar angle may serve as an independent, objective predictor of esthetics of the nose.

Relationships between fundamental movement skills and objectively measured physical activity in preschool children.

PubMed

Cliff, Dylan P; Okely, Anthony D; Smith, Leif M; McKeen, Kim

2009-11-01

Gender differences in cross-sectional relationships between fundamental movement skill (FMS) subdomains (locomotor skills, object-control skills) and physical activity were examined in preschool children. Forty-six 3- to 5-year-olds (25 boys) had their FMS video assessed (Test of Gross Motor Development II) and their physical activity objectively monitored (Actigraph 7164 accelerometers). Among boys, object-control skills were associated with physical activity and explained 16.9% (p = .024) and 13.7% (p = .049) of the variance in percent of time in moderate-to-vigorous physical activity (MVPA) and total physical activity, respectively, after controlling for age, SES and z-BMI. Locomotor skills were inversely associated with physical activity among girls, and explained 19.2% (p = .023) of the variance in percent of time in MVPA after controlling for confounders. Gender and FMS subdomain may influence the relationship between FMS and physical activity in preschool children.

Association of chronic widespread pain with objectively measured physical activity in adults: findings from the National Health and Nutrition Examination survey.

PubMed

Dansie, Elizabeth J; Turk, Dennis C; Martin, Kathryn R; Van Domelen, Dane R; Patel, Kushang V

2014-05-01

Chronic widespread pain (CWP) is a common and potentially debilitating disorder. Patterns of physical activity (PA) in adults with CWP have primarily been investigated using subjective, self-report measures. The current study sought to characterize PA among community-dwelling individuals with CWP, chronic regional pain, or no chronic pain using objective measurements obtained via accelerometry in the 2003 to 2004 National Health and Nutrition Examination Survey. Data from 3,952 participants ages 20 and older were analyzed to assess relationships between pain status and objective measurements of PA. Prevalence of CWP was 3.3% and 5.4% in men and women, respectively. In men and women, the average activity counts per minute and time spent in moderate-to-vigorous PA were significantly lower for the CWP group than for the no chronic pain group. Interestingly, time spent in sedentary, light, and lifestyle activities was not associated with pain status. Statistical interaction tests indicated that the effects of chronic pain on counts per minute were stronger in men than in women. Despite recommendations for increased moderate-to-vigorous PA as a pain management strategy for CWP, results from this nationally representative study indicate that adults with CWP participate in less moderate-to-vigorous PA than individuals without chronic pain. Using objective measurement of PA in a nationally representative sample, this study demonstrates that adults with CWP participate in reduced daily and moderate-to-vigorous PA in comparison to people with no chronic pain. Findings indicate that clinicians should emphasize the importance of increasing PA in patients with CWP. Copyright © 2014 American Pain Society. Published by Elsevier Inc. All rights reserved.

Prospective associations between measures of gross and fine motor coordination in infants and objectively measured physical activity and sedentary behavior in childhood

PubMed Central

Sánchez, Guillermo F López; Williams, Genevieve; Aggio, Daniel; Vicinanza, Domenico; Stubbs, Brendon; Kerr, Catherine; Johnstone, James; Roberts, Justine; Smith, Lee

2017-01-01

Abstract One important determinant of childhood physical activity and sedentary behavior may be that of motor development in infancy. The present analyses aimed to investigate whether gross and fine motor delays in infants were associated with objective and self-reported activity in childhood. Data were from the UK Millennium Cohort Study, a prospective cohort study, involving UK children born on or around the millennium (September 2000 and January 2002). When children were 9 months old, parents reported children's fine and gross motor-coordination, and at 7 years, sports club attendance and daily TV viewing time. Children's physical activity was measured using accelerometers at 7 years. Adjusted regression models were used to examine associations between delayed motor development and accelerometry measured moderate-to-vigorous physical activity and sedentary behavior, and parent-reported sport club attendance and TV viewing time. In this sample (n = 13,021), gross motor delay in infancy was associated with less time in moderate-to-vigorous physical activity (B −5.0 95% confidence interval [CI] −6.8, −3.2) and more time sedentary (B 13.5 95% CI 9.3, 17.8) in childhood. Gross and fine motor delays during infancy were associated with a reduced risk of having high attendance at sports clubs in childhood (both relative risk [RR] 0.7, 95% CI 0.6, 0.9). Fine motor delays, but not gross delays, were also associated with an increased risk of having high TV viewing time (RR 1.3 95% CI 1.0, 1.6). Findings from the present study suggest that delays in motor development in infancy are associated with physical activity and sedentary time in childhood. PMID:29145249

Prospective associations between measures of gross and fine motor coordination in infants and objectively measured physical activity and sedentary behavior in childhood.

PubMed

Sánchez, Guillermo F López; Williams, Genevieve; Aggio, Daniel; Vicinanza, Domenico; Stubbs, Brendon; Kerr, Catherine; Johnstone, James; Roberts, Justin; Smith, Lee

2017-11-01

One important determinant of childhood physical activity and sedentary behavior may be that of motor development in infancy. The present analyses aimed to investigate whether gross and fine motor delays in infants were associated with objective and self-reported activity in childhood. Data were from the UK Millennium Cohort Study, a prospective cohort study, involving UK children born on or around the millennium (September 2000 and January 2002). When children were 9 months old, parents reported children's fine and gross motor-coordination, and at 7 years, sports club attendance and daily TV viewing time. Children's physical activity was measured using accelerometers at 7 years. Adjusted regression models were used to examine associations between delayed motor development and accelerometry measured moderate-to-vigorous physical activity and sedentary behavior, and parent-reported sport club attendance and TV viewing time. In this sample (n = 13,021), gross motor delay in infancy was associated with less time in moderate-to-vigorous physical activity (B -5.0 95% confidence interval [CI] -6.8, -3.2) and more time sedentary (B 13.5 95% CI 9.3, 17.8) in childhood. Gross and fine motor delays during infancy were associated with a reduced risk of having high attendance at sports clubs in childhood (both relative risk [RR] 0.7, 95% CI 0.6, 0.9). Fine motor delays, but not gross delays, were also associated with an increased risk of having high TV viewing time (RR 1.3 95% CI 1.0, 1.6). Findings from the present study suggest that delays in motor development in infancy are associated with physical activity and sedentary time in childhood.

Real-time multiple objects tracking on Raspberry-Pi-based smart embedded camera

NASA Astrophysics Data System (ADS)

Dziri, Aziz; Duranton, Marc; Chapuis, Roland

2016-07-01

Multiple-object tracking constitutes a major step in several computer vision applications, such as surveillance, advanced driver assistance systems, and automatic traffic monitoring. Because of the number of cameras used to cover a large area, these applications are constrained by the cost of each node, the power consumption, the robustness of the tracking, the processing time, and the ease of deployment of the system. To meet these challenges, the use of low-power and low-cost embedded vision platforms to achieve reliable tracking becomes essential in networks of cameras. We propose a tracking pipeline that is designed for fixed smart cameras and which can handle occlusions between objects. We show that the proposed pipeline reaches real-time processing on a low-cost embedded smart camera composed of a Raspberry-Pi board and a RaspiCam camera. The tracking quality and the processing speed obtained with the proposed pipeline are evaluated on publicly available datasets and compared to the state-of-the-art methods.

Objectively Measured Physical Activity and Cognitive Function in Older Adults.

PubMed

Zhu, Wenfei; Wadley, Virginia G; Howard, Virginia J; Hutto, Brent; Blair, Steven N; Hooker, Steven P

2017-01-01

Emerging evidence suggests physical activity (PA) is associated with cognitive function. To overcome limitations of self-report PA measures, this study investigated the association of accelerometer-measured PA with incident cognitive impairment and longitudinal cognition among older adults. Participants were recruited from the cohort study Reasons for Geographic and Racial Differences in Stroke in the United States. Accelerometers provided PA measures, including the percentage of total accelerometer wearing time spent in moderate-to-vigorous-intensity PA (MVPA%), light-intensity PA, and sedentary time for four to seven consecutive days at baseline. Cognitive impairment was defined by the Six-Item Screener. Letter fluency, animal fluency, word list learning, and Montreal Cognitive Assessment (orientation and recall) were conducted to assess executive function and memory. Participants (N = 6452, 69.7 ± 8.5 yr, 55.3% women, 30.5% Black) with usable accelerometer and cognition measures spent extremely limited time in MVPA (1.5% ± 1.9% of accelerometer wearing time). During an average of 3 yr of follow-up, 346 cases of incident cognitive impairment were observed. After adjustments, participants in higher MVPA% quartiles had a lower risk of cognitive impairment (i.e., quartile 2: odds ratio = 0.64, 95% confidence interval = 0.48-0.84) and better maintenance in executive function (≥0.03 z-score units) and memory (≥0.12 z-score units) compared with quartile 1 (P < 0.05). Stratified analyses showed the same association among White adults, but higher MVPA% was associated with better maintenance of only memory among Black adults. No significance was found for light-intensity PA or sedentary time. There was a dose-response relationship between MVPA% and cognitive function in older adults, with higher levels associated with a 36% or lower risk of cognitive impairment and better maintenance of memory and executive function over time, particularly in White adults.

SIMSAT: An object oriented architecture for real-time satellite simulation