Asian Americans: A Status Report. Fact Sheet for the Chairman, Select Committee on Hunger, House of Representatives.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Div. of Human Resources.

This fact sheet presents information on the status of Asians in the United States. The following sections are included: (1) "Introduction," which includes Asian American population statistics, and the objectives, scope, and methodology of the study; (2) "Overall Income and Employment Status Comparable With U.S. Population, But Varies Widely Among…

Facts on Grants, 1982. A Report on Grant-Making.

ERIC Educational Resources Information Center

Mott (C.S.) Foundation, Flint, MI.

Summaries of 361 grants made in 1982 by the Charles Stewart Mott Foundation are presented. The guide contains fact sheets on grants for $15,000 or more; all grants for amounts under $15,000 are listed with brief descriptions. Most of the fact sheets provide information on how the grants meet the objectives of the Foundation, what they might…

Land, Ocean and Ice sheet surface elevation retrieval from CALIPSO lidar measurements

NASA Astrophysics Data System (ADS)

Lu, X.; Hu, Y.

2013-12-01

Since launching in April 2006 the main objective of the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission has been studying the climate impact of clouds and aerosols in the atmosphere. However, CALIPSO also collects information about other components of the Earth's ecosystem, such as lands, oceans and polar ice sheets. The objective of this study is to propose a Super-Resolution Altimetry (SRA) technique to provide high resolution of land, ocean and polar ice sheet surface elevation from CALIPSO single shot lidar measurements (70 m spot size). The land surface results by the new technique agree with the United States Geological Survey (USGS) National Elevation Database (NED) high-resolution elevation maps, and the ice sheet surface results in the region of Greenland and Antarctic compare very well with the Ice, Cloud and land Elevation Satellite (ICESat) laser altimetry measurements. The comparisons suggest that the obtained CALIPSO surface elevation information by the new technique is accurate to within 1 m. The effects of error sources on the retrieved surface elevation are discussed. Based on the new technique, the preliminary data products of along-track topography retrieved from the CALIPSO lidar measurements is available to the altimetry community for evaluation.

Computer-Aided Engineering Of Cabling

NASA Technical Reports Server (NTRS)

Billitti, Joseph W.

1989-01-01

Program generates data sheets, drawings, and other information on electrical connections. DFACS program, centered around single data base, has built-in menus providing easy input of, and access to, data for all personnel involved in system, subsystem, and cabling. Enables parallel design of circuit-data sheets and drawings of harnesses. Also recombines raw information to generate automatically various project documents and drawings, including index of circuit-data sheets, list of electrical-interface circuits, lists of assemblies and equipment, cabling trees, and drawings of cabling electrical interfaces and harnesses. Purpose of program to provide engineering community with centralized data base for putting in, and gaining access to, functional definition of system as specified in terms of details of pin connections of end circuits of subsystems and instruments and data on harnessing. Primary objective to provide instantaneous single point of interchange of information, thus avoiding

Use of an appendicitis medical information sheet in the pediatric primary care system.

PubMed

Oyachi, Noboru; Yagasaki, Hideaki; Suzuki, Takeyuki; Higashida, Kosuke; Komai, Takayuki; Hasuda, Norio; Takano, Kunio; Obana, Kazuko

2016-10-01

Accurate and prompt diagnosis is required for the primary evaluation of pediatric appendicitis. Among pediatricians and surgeons working in Yamanashi Prefecture, the pediatric appendicitis medical information (PAMI) sheet was edited in April 2011 to reflect the diagnostic results of the pediatric primary and emergency medical service and used as a referral document for surgical consultation to secondary hospitals. The PAMI sheet consisted of sections for history taking, symptoms, physical signs and laboratory findings without a scoring system. For 32 consecutive months starting in April 2011, 59 patients hospitalized for suspected appendicitis were retrospectively reviewed. In particular, a total of 17 referral patients evaluated with the PAMI sheet were assessed in order to evaluate the utility of the form. The pediatric surgeons were able to easily determine patient condition from the PAMI sheet. In total, 13 of 17 patients had appendicitis. According to the physical findings of the 17 studied patients, the judgment of right lower quadrant tenderness (κ = 0.63) and guarding (κ = 1.00) was consistent between the pediatric surgeons and primary attending pediatricians. The PAMI sheet aids in the collection of detailed history and objective data with a high level of accuracy, and provides useful referral diagnostic information to the secondary-level hospitals. © 2016 Japan Pediatric Society.

Carpentry. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains 17 modules for completing a course in carpentry. It is designed especially for use in secondary schools in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information sheets, student…

Masonry. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains nine modules for completing a course in masonry. It is designed especially for use in secondary schools in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information sheets, student…

Facts on Grants, 1983. A Report on Grantmaking of the Charles Stewart Mott Foundation.

ERIC Educational Resources Information Center

Mott (C.S.) Foundation, Flint, MI.

Summaries of 349 grants made in 1983 by the Charles Stewart Mott Foundation are presented. The guide contains fact sheets on grants for $15,000 or above; all grants for amounts under $15,000 are listed with brief descriptions. Most of the fact sheets provide information on how grants meet the objectives of the foundation, what they might…

14 CFR Section 6 - Objective Classification of Balance Sheet Elements

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Objective Classification of Balance Sheet... AIR CARRIERS Balance Sheet Classifications Section 6 Objective Classification of Balance Sheet...) Record here all general and working funds available on demand as of the date of the balance sheet which...

14 CFR Section 6 - Objective Classification of Balance Sheet Elements

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Objective Classification of Balance Sheet... AIR CARRIERS Balance Sheet Classifications Section 6 Objective Classification of Balance Sheet...) Record here all general and working funds available on demand as of the date of the balance sheet which...

Self-Contained Math Manual. Teacher's Guide.

ERIC Educational Resources Information Center

Grant, Shelia I.

This instructional manual consists of 11 competency-based units for a mathematics course for trade and industrial programs in Texas. Each instructional unit includes the following basic components: unit and specific objectives, notes to the instructor (outline of steps to follow in accomplishing specific objectives), information sheets,…

Welding. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains 30 modules for completing a course in welding. It is designed especially for use in secondary schools in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information sheets, student self-check…

Permission Form Synopses to Improve Parents' Understanding of Research: A Randomized Trial

PubMed Central

D'Angio, Carl T.; Wang, Hongyue; Hunn, Julianne E.; Pryhuber, Gloria S.; Chess, Patricia R.; Lakshminrusimha, Satyan

2017-01-01

Objective We hypothesized that, among parents of potential neonatal research subjects, an accompanying cover sheet added to the permission form (intervention) would increase understanding of the research, when compared to a standard form (control). Study Design This pilot study enrolled parents approached for one of two index studies: one randomized trial and one observational study. A one-page cover sheet described critical study information. Families were randomized 1:1 to receive the cover sheet or not. Objective and subjective understanding and satisfaction were measured. Result Thirty-two parents completed all measures (17 control, 15 intervention). There were no differences in comprehension score (16.8 ± 5.7 v. 16.3 ± 3.5), subjective understanding (median 6.0 v. 6.5), or overall satisfaction with consent (median 7.0 v. 6.5) between control and intervention groups (all p>0.50). Conclusion A simplified permission form cover sheet had no effect on parents' understanding of studies for which their newborns were being recruited. PMID:28358380

The Great Balancing Act. Nutrition Comes Alive. Level 4. Nutrition Educator's Guide and Work Sheets, Information Sheets, Story, Letters to Parents. Revised Edition.

ERIC Educational Resources Information Center

Waldron, Laurie

This guide offers a nutrition education program for students in Kindergarten through Grade 6. Activities span all grades as well as activities for the specific level. Nutrition education objectives are stated for each grade level: (1) grade four--students will explore how to balance food intake and energy output for overall health and physical…

Farm Business Management. Volume I. Vocational Agriculture Education.

ERIC Educational Resources Information Center

Hodgens, Jim; Meyers, Leland

This curriculum guide provides a basic core of instruction for the first year of a three-year adult program in farm business management. It contains 12 units of instruction. Each unit consists of seven basic components: performance objectives, teacher activities, information sheets (content essential for meeting the cognitive objectives),…

Machine Shop. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains eight modules for completing a course in machine shop. It is designed especially for use in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities and resources, information sheets, student self-check with answer key,…

Are we reaching the target audience? Evaluation of a fish fact sheet.

PubMed

Burger, J; Waishwell, L

2001-09-28

According to the US Environmental Protection Agency, over 16% of freshwater lakes and 7% of the rivers are under some sort of fish consumption advisory because of the presence of toxic chemicals. There is considerable interest in the issuing of information, advisories, and fact sheets concerning the consumption of wild-caught fish from contaminated waters, and in the actual consumption patterns of subsistence and recreational anglers. Despite the large number of consumption advisories issued by state agencies, there is little information on how these advisories, or other forms of risk communication, are perceived by target audiences, notably fishermen and women of child-bearing age. The states of South Carolina and Georgia issue consumption advisories for fish from the Savannah River, among other sites. To gain a greater insight into the perception of anglers about a supplemental fish fact sheet jointly developed by South Carolina, Georgia, federal agencies, and the Consortium for Risk Evaluation with Stakeholder Participation, we interviewed fisherman along the Savannah River. The objectives were to determine: (1) whether they had previously read the Fish Fact Sheet or had heard about the consumption advisories; (2) what major message they obtained from the sheet; (3) who they felt the fact sheet was aimed at, and who should get the Fish Fact Sheet; (4) who should be concerned about health risks from consuming the fish; and (5) the best method of disseminating such information. We interviewed 92 fishermen (37% black, 62% white) during the fishing season of 1999. Half had heard some information about consumption advisories, mainly from the media (64%). The study concluded that there were no ethnic differences in whether they had heard about the advisories, understood the major message of the fact sheet, felt they could reduce their risk from consuming the fish, or felt that it made a difference which agency issued the fact sheet. There were significant ethnic differences in the ways people thought the risk from eating fish could be reduced, sources of information about the risks from consuming fish, and what other information they would like about the risks associated with contaminated fish.

Practical Nursing. Volume II. Health Occupations Education. Revised.

ERIC Educational Resources Information Center

Rogers, Helen V.; Reid-Sloan, Jamee

This curriculum guide, revised from a 1975 edition, provides teachers with up-to-date information and skill-related applications needed by practical nurses. It includes 4 sections and 24 instructional units. Each unit of instruction consists of eight basic components: performance objectives, teacher activities, information sheets, assignment…

Directory of research projects, 1991. Planetary geology and geophysics program

NASA Technical Reports Server (NTRS)

Maxwell, Ted A. (Editor)

1991-01-01

Information is provided about currently funded scientific research within the Planetary Geology and Geophysics Program. The directory consists of the proposal summary sheet from each proposal funded by the program during fiscal year 1991. Information is provided on the research topic, principal investigator, institution, summary of research objectives, past accomplishments, and proposed investigators.

Directory of research projects: Planetary geology and geophysics program

NASA Technical Reports Server (NTRS)

Holt, Henry (Editor)

1990-01-01

Information about currently funded scientific research within the Planetary Geology and Geophysics Program is provided, including the proposal summary sheet from each proposal funded under the program during fiscal year 1990. Information about the research project, including title, principal investigator, institution, summary of research objectives, past accomplishments, and proposed new investigations is also provided.

Method and apparatus for assessing material properties of sheet-like materials

DOEpatents

Telschow, Kenneth L.; Deason, Vance A.

2002-01-01

Apparatus for producing an indication of a material property of a sheet-like material according to the present invention may comprise an excitation source for vibrating the sheet-like material to produce at least one traveling wave therein. A light source configured to produce an object wavefront and a reference wavefront directs the object wavefront toward the sheet-like material to produce a modulated object wavefront. A modulator operatively associated with the reference wavefront modulates the reference wavefront in synchronization with the traveling wave on the sheet-like material to produce a modulated reference wavefront. A sensing medium positioned to receive the modulated object wavefront and the modulated reference wavefront produces an image of the traveling wave in the sheet-like material, the image of the anti-symmetric traveling wave being related to a displacement amplitude of the anti-symmetric traveling wave over a two-dimensional area of the vibrating sheet-like material. A detector detects the image of the traveling wave in the sheet-like material.

Fluctuations in Conjunction Miss Distance Projections as Time Approaches Time of Closest Approach

NASA Technical Reports Server (NTRS)

Christian, John A., III

2005-01-01

A responsibility of the Trajectory Operations Officer is to ensure that the International Space Station (ISS) avoids colliding with debris. United States Space Command (USSPACECOM) tracks and catalogs a portion of the debris in Earth orbit, but only objects with a perigee less than 600 km and a radar cross section (RCS) greater than 10 cm-objects that, in fact, represent only a small fraction of the objects in Earth orbit. To accommodate for this, the ISS uses shielding to protect against collisions with smaller objects. This study provides a better understanding of how quickly, and to what degree, USSPACECOM projections tend to converge to the final, true miss distance. The information included is formulated to better predict the behavior of miss distance data during real-time operations. It was determined that the driving components, in order of impact on miss distance fluctuations, are energy dissipation rate (EDR), RCS, and inclination. Data used in this analysis, calculations made, and conclusions drawn are stored in Microsoft Excel log sheets. A separate log sheet, created for each conjunction, contains information such as predicted miss distances, apogee and perigee of debris orbit, EDR, RCS, inclination, tracks and observations, statistical data, and other evaluation/orbital parameters.

Residential Carpentry.

ERIC Educational Resources Information Center

Hendrix, Laborn J.

This curriculum guide provides instructional materials for a course to train carpenters who will make careers in construction. It includes 6 sections and 21 instructional units. Each unit of instruction consists of eight basic components: performance objectives, teacher activities, information sheets (content essential for meeting the cognitive…

South Carolina Guide for Selling.

ERIC Educational Resources Information Center

Elliott, Ronald T.

This curriculum guide provides materials for a secondary course in salesmanship. It contains 6 units that cover 33 competencies. Each competency is presented in a standard format: performance objective, resources, teaching activities, evaluation, and supplementary materials, including an information sheet, exercises, and checklists. Units and…

Effects of electric current on individual graphene oxide sheets combining in situ transmission electron microscopy and Raman spectroscopy

NASA Astrophysics Data System (ADS)

Martín, Gemma; Varea, Aïda; Cirera, Albert; Estradé, Sònia; Peiró, Francesca; Cornet, Albert

2018-07-01

Graphene oxide (GO) is currently the object of extensive research because of its potential use in mass production of graphene-based materials, but also due to its tunability which holds great promise for new nanoscale electronic devices and sensors. To obtain a better understanding of the role of GO in electronic nano-devices, the elucidation of the effects of electrical current on a single GO sheet is of great interest. In this work, in situ transmission electron microscopy is used to study the effects of the electrical current flow through single GO sheets using an scanning tunneling microscope holder. In order to correlate the applied current with the structural properties of GO, Raman spectroscopy is carried out and data analysis is used to obtain information regarding the reduction grade and the disorder degree of the GO sheets before and after the application of current.

Effects of electric current on individual graphene oxide sheets combining in situ transmission electron microscopy and Raman spectroscopy.

PubMed

Martín, Gemma; Varea, Aïda; Cirera, Albert; Estradé, Sònia; Peiró, Francesca; Cornet, Albert

2018-04-17

Graphene oxide (GO) is currently the object of extensive research because of its potential use in mass production of graphene-based materials, but also due to its tunability which holds great promise for new nanoscale electronic devices and sensors. To obtain a better understanding of the role of GO in electronic nano-devices, the elucidation of the effects of electrical current on a single GO sheet is of great interest. In this work, in situ transmission electron microscopy is used to study the effects of the electrical current flow through single GO sheets using an scanning tunneling microscope holder. In order to correlate the applied current with the structural properties of GO, Raman spectroscopy is carried out and data analysis is used to obtain information regarding the reduction grade and the disorder degree of the GO sheets before and after the application of current.

Aircraft Environmental Systems Mechanic. Part 2.

ERIC Educational Resources Information Center

Chanute AFB Technical Training Center, IL.

This packet contains learning modules designed for a self-paced course in aircraft environmental systems mechanics that was developed for the Air Force. Learning modules consist of some or all of the following materials: objectives, instructions, equipment, procedures, information sheets, handouts, workbooks, self-tests with answers, review…

Housing and Home Furnishings Modules.

ERIC Educational Resources Information Center

Clemson Univ., SC. Vocational Education Media Center.

These sixty-seven modules provide student materials for a home economics course in housing and home furnishings. (A companion instructor's guide is available separately--see note.) Each module contains an objective, student information, learning activities (and activity sheets as needed), student self-checks, student self-check answers, check-out…

Aircraft Environmental Systems Mechanic. Part 1.

ERIC Educational Resources Information Center

Chanute AFB Technical Training Center, IL.

This packet contains learning modules for a self-paced course in aircraft environmental systems mechanics that was developed for the Air Force. Each learning module consists of some or all of the following: objectives, instructions, equipment, procedures, information sheets, handouts, self-tests with answers, review section, tests, and response…

Microelectronics and Special Education. CET/MEP Information Sheet.

ERIC Educational Resources Information Center

Council for Educational Technology, London (England).

Used as an additional aid by the teacher, microelectronics can assist mentally and physically handicapped children to meet educational objectives that have been specifically agreed upon for the individual child. Microelectronics can help deaf children develop speech production, communication skills, and grammar and sentence construction;…

Forestry. Teacher Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This curriculum is designed to provide training in skills used by technicians and foresters throughout the world who plant, care for, and harvest trees. It contains 16 units. Each instructional unit includes some or all of the basic components of a unit of instruction: performance objectives, suggested activities, handouts, information sheets,…

Learn, Grow, Become. TSA Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This revised curriculum guide contains five units that are designed to help students develop an understanding of the mission of the Technology Student Association (TSA). Each unit follows a standard format that includes some or all of these basic components: performance objectives, suggested activities, handouts, information sheets, supplements,…

How Does XML Help Libraries?

ERIC Educational Resources Information Center

Banerjee, Kyle

2002-01-01

Discusses XML, how it has transformed the way information is managed and delivered, and its impact on libraries. Topics include how XML differs from other markup languages; the document object model (DOM); style sheets; practical applications for archival materials, interlibrary loans, digital collections, and MARC data; and future possibilities.…

3D surface parameterization using manifold learning for medial shape representation

NASA Astrophysics Data System (ADS)

Ward, Aaron D.; Hamarneh, Ghassan

2007-03-01

The choice of 3D shape representation for anatomical structures determines the effectiveness with which segmentation, visualization, deformation, and shape statistics are performed. Medial axis-based shape representations have attracted considerable attention due to their inherent ability to encode information about the natural geometry of parts of the anatomy. In this paper, we propose a novel approach, based on nonlinear manifold learning, to the parameterization of medial sheets and object surfaces based on the results of skeletonization. For each single-sheet figure in an anatomical structure, we skeletonize the figure, and classify its surface points according to whether they lie on the upper or lower surface, based on their relationship to the skeleton points. We then perform nonlinear dimensionality reduction on the skeleton, upper, and lower surface points, to find the intrinsic 2D coordinate system of each. We then center a planar mesh over each of the low-dimensional representations of the points, and map the meshes back to 3D using the mappings obtained by manifold learning. Correspondence between mesh vertices, established in their intrinsic 2D coordinate spaces, is used in order to compute the thickness vectors emanating from the medial sheet. We show results of our algorithm on real brain and musculoskeletal structures extracted from MRI, as well as an artificial multi-sheet example. The main advantages to this method are its relative simplicity and noniterative nature, and its ability to correctly compute nonintersecting thickness vectors for a medial sheet regardless of both the amount of coincident bending and thickness in the object, and of the incidence of local concavities and convexities in the object's surface.

Entrepreneur Training Program. Getting Started.

ERIC Educational Resources Information Center

De Maria, Richard

This student workbook on starting a small business is part of the entrepreneur training program at Ocean County (New Jersey) Vocational-Technical Schools. The workbook consists of 16 units containing goals and objectives, study questions, exercises, sample materials, and information sheets. Unit topics are as follows: being a small business owner;…

Nutrition. Learning Activity Package.

ERIC Educational Resources Information Center

Lee, Carolyn

This learning activity package on nutrition is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

Shock & Anaphylactic Shock. Learning Activity Package.

ERIC Educational Resources Information Center

Hime, Kirsten

This learning activity package on shock and anaphylactic shock is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

Oral Hygiene. Learning Activity Package.

ERIC Educational Resources Information Center

Hime, Kirsten

This learning activity package on oral hygiene is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics…

Custom Sewing, Modules One, Two, and Three. Instructor Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This document consists of three modules designed for a custom apparel and garment sewing program teaching students to construct, alter, and prepare garments and home fashions to customer specifications. Each module includes some or all of the following components: performance objectives, lesson plans, suggested activities, information sheets,…

Grooming. Learning Activity Package.

ERIC Educational Resources Information Center

Stark, Pamela

This learning activity package on grooming for health workers is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

The balance sheet of benefits and harms of breast cancer population-based screening in Europe: outcome research, practice and future challenges.

PubMed

Broeders, Mireille; Paci, Eugenio

2015-11-01

Breast cancer screening programs are still object of harsh debate. In 2012, the Independent UK Panel reviewed the benefits and harms of mammography screening based on randomized trials and the EUROSCREEN Working Group reviewed European observational outcome studies. The conclusion was that screening programs should continue, while acknowledging that harms, such as the occurrence of false-positive results and overdiagnosis, can have a negative impact on a woman's life. Information on the balance sheet of the benefits and harms of breast cancer screening should help women and their physicians to make an informed choice. The future challenge for breast screening programs is to assess the feasibility, acceptability, effectiveness and impact of risk-based screening in order to maximize benefit-to-harm ratios.

An efficacy trial of an electronic health record-based strategy to inform patients on safe medication use: The role of written and spoken communication.

PubMed

Curtis, Laura M; Mullen, Rebecca J; Russell, Allison; Fata, Aimee; Bailey, Stacy C; Makoul, Gregory; Wolf, Michael S

2016-09-01

We tested the feasibility and efficacy of an electronic health record (EHR) strategy that automated the delivery of print medication information at the time of prescribing. Patients (N=141) receiving a new prescription at one internal medicine clinic were recruited into a 2-arm physician-randomized study. We leveraged an EHR platform to automatically deliver 1-page educational 'MedSheets' to patients after medical encounters. We also assessed if physicians counseled patients via patient self-report immediately following visits. Patients' understanding was objectively measured via phone interview. 122 patients completed the trial. Most intervention patients (70%) reported receiving MedSheets. Patients reported physicians frequently counseled on indication and directions for use, but less often for risks. In multivariable analysis, written information (OR 2.78, 95% CI 1.10-7.04) and physician counseling (OR 2.95, 95% CI 1.26-6.91) were independently associated with patient understanding of risk information. Receiving both was most beneficial; 87% of those receiving counseling and MedSheets correctly recalled medication risks compared to 40% receiving neither. An EHR can be a reliable means to deliver tangible, print medication education to patients, but cannot replace the salience of physician-patient communication. Offering both written and spoken modalities produced a synergistic effect for informing patients. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Electrical Experiments. VT-214-12-3. Part III. Basic Electronics.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

Designed for high school electronics students, this third document in a series of six electrical learning activity packages focuses on basic electronics. An introductory section gives the objective for the activities, an introduction, and an outline of the content. The remainder of the activity book is comprised of information sheets and job…

The Surgical Scrub. Learning Activity Package.

ERIC Educational Resources Information Center

Runge, Lillian

This learning activity package on the surgical scrub is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These…

Sense and readability: participant information sheets for research studies.

PubMed

Ennis, Liam; Wykes, Til

2016-02-01

Informed consent in research is partly achieved through the use of information sheets. There is a perception however that these information sheets are long and complex. The recommended reading level for patient information is grade 6, or 11-12 years old. To investigate whether the readability of participant information sheets has changed over time, whether particular study characteristics are related to poorer readability and whether readability and other study characteristics are related to successful study recruitment. Method: We obtained 522 information sheets from the UK National Institute for Health Research Clinical Research Network: Mental Health portfolio database and study principal investigators. Readability was assessed with the Flesch reading index and the Grade level test. Information sheets increased in length over the study period. The mean grade level across all information sheets was 9.8, or 15-16 years old. A high level of patient involvement was associated with more recruitment success and studies involving pharmaceutical or device interventions were the least successful. The complexity of information sheets had little bearing on successful recruitment. Information sheets are far more complex than the recommended reading level of grade 6 for patient information. The disparity may be exacerbated by an increasing focus on legal content. Researchers would benefit from clear guidance from ethics committees on writing succinctly and accessibly and how to balance the competing legal issues with the ability of participants to understand what a study entails. © The Royal College of Psychiatrists 2016.

Sense and readability: participant information sheets for research studies

PubMed Central

Ennis, Liam; Wykes, Til

2016-01-01

Background Informed consent in research is partly achieved through the use of information sheets. There is a perception however that these information sheets are long and complex. The recommended reading level for patient information is grade 6, or 11–12 years old. Aims To investigate whether the readability of participant information sheets has changed over time, whether particular study characteristics are related to poorer readability and whether readability and other study characteristics are related to successful study recruitment. Method We obtained 522 information sheets from the UK National Institute for Health Research Clinical Research Network: Mental Health portfolio database and study principal investigators. Readability was assessed with the Flesch reading index and the Grade level test. Results Information sheets increased in length over the study period. The mean grade level across all information sheets was 9.8, or 15–16 years old. A high level of patient involvement was associated with more recruitment success and studies involving pharmaceutical or device interventions were the least successful. The complexity of information sheets had little bearing on successful recruitment. Conclusions Information sheets are far more complex than the recommended reading level of grade 6 for patient information. The disparity may be exacerbated by an increasing focus on legal content. Researchers would benefit from clear guidance from ethics committees on writing succinctly and accessibly and how to balance the competing legal issues with the ability of participants to understand what a study entails. PMID:26382948

Comprehensive computerized diabetes registry. Serving the Cree of Eeyou Istchee (eastern James Bay).

PubMed Central

Dannenbaum, D.; Verronneau, M.; Torrie, J.; Smeja, H.; Robinson, E.; Dumont, C.; Kovitch, I.; Webster, T.

1999-01-01

PROBLEM BEING ADDRESSED: Diabetes is rapidly evolving as a major health concern in the Cree population of eastern James Bay (Eeyou Istchee). The Cree Board of Health and Social Services of James Bay (CBHSSJB) diabetes registry was the initial phase in the development of a comprehensive program for diabetes in this region. OBJECTIVE OF PROGRAM: The CBHSSJB diabetes registry was developed to provide a framework to track the prevalence of diabetes and the progression of diabetic complications. The database will also identify patients not receiving appropriate clinical and laboratory screening for diabetic complications, and will provide standardized clinical flow sheets for routine patient management. MAIN COMPONENTS OF PROGRAM: The CBHSSJB diabetes registry uses a system of paper registration forms and clinical flow sheets kept in the nine community clinics. Information from these sheets is entered into a computer database annually. The flow sheets serve as a guideline for appropriate management of patients with diabetes, and provide a one-page summary of relevant clinical and laboratory information. CONCLUSIONS: A diabetes registry is vital to follow the progression of diabetes and diabetic complications in the region served by the CBHSSJB. The registry system incorporates both a means for regional epidemiologic monitoring of diabetes mellitus and clinical tools for managing patients with the disease. PMID:10065310

Objective, Structured Proforma to Score the Merit of Scientific Presentations.

PubMed

Agarwal, Nayan; Thawani, Rajat; Gupta, Setu; Sharma, Arun; Dhaliwal, Upreet

2015-12-01

Around 100,000 medical conferences are organized all over the world and hence, they form an integral part of a medical professional's life. Oral presentations, especially award sessions, are judged by a panel of faculty judges who score individual presentations on various aspects including content, delivery and submission. Our objective was to compare the scores given by student-judges and faculty-judges for scientific presentations using the standardized score sheet. An objective, structured score-sheet was designed using existing literature. Five presentations, all made using PowerPoint, were judged using the structured score-sheet by seven student-judges and two-faculty judges. The mean score of all the score-sheets (n = 45) was 38.5 + 5.4 (out of a maximum score of 50). There was no statistical difference between mean scores assigned by students or faculty (p = 0.2). Thus, an objective, structured score sheet like ours, when used to judge scientific presentations, gave uniform results even when judges hailed from different levels of the medical hierarchy.

Electrical Experiments. VT-214-12-1. Part I. Electric Motor Control.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

Designed for high school electronics students, this first document in a series of six electrical learning activity packages focuses on electric motor control. An introductory section gives the objective for the activities, an introduction, and an outline of the content. The remainder of the activity book is comprised of information sheets and job…

Development of a check sheet for collecting information necessary for occupational safety and health activities and building relevant systems in overseas business places.

PubMed

Kajiki, Shigeyuki; Kobayashi, Yuichi; Uehara, Masamichi; Nakanishi, Shigemoto; Mori, Koji

2016-06-07

This study aimed to develop an information gathering check sheet to efficiently collect information necessary for Japanese companies to build global occupational safety and health management systems in overseas business places. The study group consisted of 2 researchers with occupational physician careers in a foreign-affiliated company in Japan and 3 supervising occupational physicians who were engaged in occupational safety and health activities in overseas business places. After investigating information and sources of information necessary for implementing occupational safety and health activities and building relevant systems, we conducted information acquisition using an information gathering check sheet in the field, by visiting 10 regions in 5 countries (first phase). The accuracy of the information acquired and the appropriateness of the information sources were then verified in study group meetings to improve the information gathering check sheet. Next, the improved information gathering check sheet was used in another setting (3 regions in 1 country) to confirm its efficacy (second phase), and the information gathering check sheet was thereby completed. The information gathering check sheet was composed of 9 major items (basic information on the local business place, safety and health overview, safety and health systems, safety and health staff, planning/implementation/evaluation/improvement, safety and health activities, laws and administrative organs, local medical care systems and public health, and medical support for resident personnel) and 61 medium items. We relied on the following eight information sources: the internet, company (local business place and head office in Japan), embassy/consulate, ISO certification body, university or other educational institutions, and medical institutions (aimed at Japanese people or at local workers). Through multiple study group meetings and a two-phased field survey (13 regions in 6 countries), an information gathering check sheet was completed. We confirmed the possibility that this check sheet would enable the user to obtain necessary information when expanding safety and health activities in a country or region that is new to the user. It is necessary in the future to evaluate safety and health systems and activities using this information gathering check sheet in a local business place in any country in which a Japanese business will be established, and to verify the efficacy of the check sheet by conducting model programs to test specific approaches.

Catalogue of X-Ray Texture Data for Al-Cu-Li Alloy 1460, 2090, 2096 and 2195 Near-Net-Shape Extrusions, Sheet and Plate

NASA Technical Reports Server (NTRS)

Hales, Stephen J.; Hafley, Robert A.; Alexa, Joel A.

1998-01-01

The effect of crystallographic texture on the mechanical properties of near-net-shape extrusions is of major interest ff these products are to find application in launch vehicle or aircraft structures. The objective of this research was to produce a catalogue containing quantitative texture information for extruded product, sheet and plate. The material characterized was extracted from wide, integrally stiffened panels fabricated from the Al-Cu-Li alloys 1460, 2090, 2096 and 2195. The textural characteristics of sheet and plate products of the same alloys were determined for comparison purposes. The approach involved using X-ray diffraction to generate pole figures in combination with orientation distribution function analysis. The data were compiled as a function of location in the extruded cross-sections and the variation in the major deformation- and recrystallization-related texture components was identified.

Are safety data sheets for cleaning products used in Norway a factor contributing to the risk of workers exposure to chemicals?

PubMed

Suleiman, Abdulqadir M; Svendsen, Kristin V H

2014-10-01

Cleaning products are considered less hazardous than those used in other sectors. Suppliers and distributors are less conscientious when it comes to informing users on health risks. The aim of the study was to elaborate on the usefulness and clarity of information in the safety data sheets (SDS) for cleaning products, and considering if the use of these SDSs can be seen as a risk factor towards occupational exposure to hazardous chemicals in the sector. Safety data sheets were selected based on the risk level of the product assigned in an industrial sector scheme. 320 SDSs for cleaning products were reviewed. Constituent components found in the products over a given threshold were listed and available information thereof used to assess the perceived non-hazard consideration of the chemicals. The contents of the SDSs was generic and mostly incomplete. Safety measures and health information lacked sufficient specificity despite varying compositions and concentrations of components. There is generally incompatibility between mentioned sections on the suggested non-hazardous nature of the products and health effects. Not all substances used in these products have harmonized classifications, which makes them open to various classification of the products and the suggested safety measures. This results in different companies classifying similar products differently. Risk management measures and suggested personal protective equipment (PPEs) are given haphazardly. Physical properties relevant to risk assessment are not included. The safety data sheets are ambiguous, and they lack relevant and important information. Inadequate information and risk assessment concerning the products can lead to workers being exposed to hazardous chemicals. Underestimation of the hazard contribution of the components of the products and the insufficient, non-objective mention of appropriate control and protective measures are the major contributing elements. There is a need to test the products in order to establish health effects and product specific safety measures.

The future of spaceborne altimetry. Oceans and climate change: A long-term strategy

NASA Technical Reports Server (NTRS)

Koblinsky, C. J. (Editor); Gaspar, P. (Editor); Lagerloef, G. (Editor)

1992-01-01

The ocean circulation and polar ice sheet volumes provide important memory and control functions in the global climate. Their long term variations are unknown and need to be understood before meaningful appraisals of climate change can be made. Satellite altimetry is the only method for providing global information on the ocean circulation and ice sheet volume. A robust altimeter measurement program is planned which will initiate global observations of the ocean circulation and polar ice sheets. In order to provide useful data about the climate, these measurements must be continued with unbroken coverage into the next century. Herein, past results of the role of the ocean in the climate system is summarized, near term goals are outlined, and requirements and options are presented for future altimeter missions. There are three basic scientific objectives for the program: ocean circulation; polar ice sheets; and mean sea level change. The greatest scientific benefit will be achieved with a series of dedicated high precision altimeter spacecraft, for which the choice of orbit parameters and system accuracy are unencumbered by requirements of companion instruments.

Performance-based readability testing of participant information for a Phase 3 IVF trial

PubMed Central

Knapp, Peter; Raynor, DK; Silcock, Jonathan; Parkinson, Brian

2009-01-01

Background Studies suggest that the process of patient consent to clinical trials is sub-optimal. Participant information sheets are important but can be technical and lengthy documents. Performance-based readability testing is an established means of assessing patient information, and this study aimed to test its application to participant information for a Phase 3 trial. Methods An independent groups design was used to study the User Testing performance of the participant information sheet from the Phase 3 'Poor Responders' trial of In Vitro Fertilisation (IVF). 20 members of the public were asked to read it, then find and demonstrate understanding of 21 key aspects of the trial. The participant information sheet was then re-written and re-designed, and tested on 20 members of the public, using the same 21 item questionnaire. Results The original participant information sheet performed well in some places. Participants could not find some answers and some of the found information was not understood. In total there were 30 instances of information being not found or not understood. Answers to three questions were found but not understood by many of the participants, these related to aspects of the drug timing, Follicle Stimulating Hormone and compensation. Only two of the 20 participants could find and show understanding of all question items when using the original sheet. The revised sheet performed generally better, with 17 instances of information being not found or not understood, although the number of 'not found' items increased. Half of the 20 participants could find and show understanding of all question items when using the revised sheet. When asked to compare the versions of the sheet, almost all participants preferred the revised version. Conclusion The original participant information sheet may not have enabled patients fully to give valid consent. Participants seeing the revised sheet were better able to understand the trial. Those who write information for trial participants should take account of good practice in information design. Performance-based User Testing may be a useful method to indicate strengths and weaknesses in trial information. PMID:19723335

A Veterinary Comparative Counseling Elective Featuring Web-based, Student-created, Client Information Sheets

PubMed Central

Miller, Jennifer C.

2016-01-01

Objective. To design and implement a course in Companion Animal Comparative Counseling that would expose students (N=38) to essential elements of veterinary therapeutics and provide them with the opportunity to apply their knowledge by writing and posting client information sheets (CIS) on an open web site. Design. The elective course was limited to companion animals. Nine different topics were covered over the semester. Class sessions included a didactic component, trivia questions, and field trips. There were 4 major graded assessments: an examination on foundation knowledge, followed by two comparative counseling assessments and evaluation of group-composed CIS. Attendance and participation were also considered. Assessment. The class learned comparative disease states, how to counsel on common pet prescriptions, where to access informatics about specific veterinary drugs, and how to create their own CIS. Conclusion. As pharmacists, these students may have improved their training in veterinary comparative pharmacy. PMID:26941441

Flow pathways and sediment trapping in a field-scale vegetative filter

Treesearch

M. J. Helmers; D. E. Eisenhauer; Mike G. Dosskey; T. G. Franti; J. M. Brothers; M. C. McCullough

2005-01-01

Vegetative filters (VF) are a best management practive installed in many areas to control sediment movement to water bodies. It is commonly assumed that runoff proceeds perpendicularly across a VF as sheet flow. However, there is little research information on natural pathways of water movement and performance of field-scale VF. The objectives of this study were: (1)...

Venus Data Analysis Program: Directory of Research Projects (1993-1994)

NASA Technical Reports Server (NTRS)

1994-01-01

This directory provides information about the scientific investigations funded by the NASA Venus Data Analysis Program (VDAP) during fiscal year 1993. The VDAP Directory consists of summary sheets from the proposals that were selected by NASA for funding in FY 93. Each summary sheet indicates the title, principal investigator, institution of the investigation, and information related to the objectives of the research activities proposed for FY 93. The objective of the VDAP Program is to advance our understanding of the nature and evolution of Venus. VDAP supports scientific investigation using data obtained from the Magellan, Pioneer Venus, and other Venus missions, as well as earth-based observations that contribute to understanding the physical and evolutionary properties of Venus. The program intends to enhance the scientific return from these missions by broadening the participation in the analysis of Venus data. Categories of research funded by VDAP are atmosphere, ionosphere, geology, geophysics, and mapping. The directory is intended to provide the science community with an overview of the research projects supported by this program. Research activities identified in this directory were selected for funding in FY 93 on the basis of scientific peer review conducted by the VDAP Review Panel.

Single objective light-sheet microscopy for high-speed whole-cell 3D super-resolution

PubMed Central

Meddens, Marjolein B. M.; Liu, Sheng; Finnegan, Patrick S.; Edwards, Thayne L.; James, Conrad D.; Lidke, Keith A.

2016-01-01

We have developed a method for performing light-sheet microscopy with a single high numerical aperture lens by integrating reflective side walls into a microfluidic chip. These 45° side walls generate light-sheet illumination by reflecting a vertical light-sheet into the focal plane of the objective. Light-sheet illumination of cells loaded in the channels increases image quality in diffraction limited imaging via reduction of out-of-focus background light. Single molecule super-resolution is also improved by the decreased background resulting in better localization precision and decreased photo-bleaching, leading to more accepted localizations overall and higher quality images. Moreover, 2D and 3D single molecule super-resolution data can be acquired faster by taking advantage of the increased illumination intensities as compared to wide field, in the focused light-sheet. PMID:27375939

40 CFR 205.173-4 - Information sheet.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Information sheet. 205.173-4 Section 205.173-4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT... Information sheet. The manufacturer must include the Noise Emissions Warranty statement, Tampering Prohibition...

Wave-induced drift of large floating sheets

NASA Astrophysics Data System (ADS)

Christensen, K. H.; Weber, J. E.

In this article we study the wave-induced drift of large, flexible shallow floating objects, referred to as sheets. When surface waves propagate through a sheet, they provide a mean stress on the sheet, resulting in a mean drift. In response, the sheet generates an Ekman current. The drift velocity of the sheet is determined by (i) the wave-induced stress, (ii) the viscous stress due to the Ekman current, and (iii) the Coriolis force. The sheet velocity and the current beneath the sheet are determined for constant and depth-varying eddy viscosities.

Layered Ice Near the South Pole of Mars

NASA Image and Video Library

2017-12-12

The two largest ice sheets in the inner solar system are here on Earth, Antarctica and Greenland. The third largest is at the South Pole of Mars and a small part of it is shown in this image from NASA's Mars Reconnaissance Orbiter (MRO). Much like the terrestrial examples, this ice sheet is layered and scientists refer to it as the South Polar layered deposits. The ice layers contain information about past climates on Mars and deciphering this record has been a major goal of Mars science for decades. This slope, near the ice sheet's edge, shows the internal layers that have this climate record. With stereo images, we can tell the heights of these layers so we can measure their thickness and try to unravel the climatic information they contain. (Be sure to view the digital terrain model for this observation.) The map is projected here at a scale of 25 centimeters (9.8 inches) per pixel. [The original image scale is 25.0 centimeters (9.8 inches) per pixel (with 1 x 1 binning); objects on the order of 75 centimeters (29.5 inches) across are resolved.] North is up. https://photojournal.jpl.nasa.gov/catalog/PIA22125

ENVIRONMENTAL INFORMATION MANAGEMENT SYSTEM (EIMS) FACT SHEET

EPA Science Inventory

The purpose of the fact sheet is to provide information about the US EPA Office of Research and Developments Environmental Information Management System. The fact sheet indicates the type of records that are in EIMS, systems that are integrated with EIMS as well as some highligh...

Personalized disease-specific protein corona influences the therapeutic impact of graphene oxide

NASA Astrophysics Data System (ADS)

Hajipour, Mohammad Javad; Raheb, Jamshid; Akhavan, Omid; Arjmand, Sareh; Mashinchian, Omid; Rahman, Masoud; Abdolahad, Mohammad; Serpooshan, Vahid; Laurent, Sophie; Mahmoudi, Morteza

2015-05-01

The hard corona, the protein shell that is strongly attached to the surface of nano-objects in biological fluids, is recognized as the first layer that interacts with biological objects (e.g., cells and tissues). The decoration of the hard corona (i.e., the type, amount, and conformation of the attached proteins) can define the biological fate of the nanomaterial. Recent developments have revealed that corona decoration strongly depends on the type of disease in human patients from which the plasma is obtained as a protein source for corona formation (referred to as the `personalized protein corona'). In this study, we demonstrate that graphene oxide (GO) sheets can trigger different biological responses in the presence of coronas obtained from various types of diseases. GO sheets were incubated with plasma from human subjects with different diseases/conditions, including hypofibrinogenemia, blood cancer, thalassemia major, thalassemia minor, rheumatism, fauvism, hypercholesterolemia, diabetes, and pregnancy. Identical sheets coated with varying protein corona decorations exhibited significantly different cellular toxicity, apoptosis, and uptake, reactive oxygen species production, lipid peroxidation and nitrogen oxide levels. The results of this report will help researchers design efficient and safe, patient-specific nano biomaterials in a disease type-specific manner for clinical and biological applications.The hard corona, the protein shell that is strongly attached to the surface of nano-objects in biological fluids, is recognized as the first layer that interacts with biological objects (e.g., cells and tissues). The decoration of the hard corona (i.e., the type, amount, and conformation of the attached proteins) can define the biological fate of the nanomaterial. Recent developments have revealed that corona decoration strongly depends on the type of disease in human patients from which the plasma is obtained as a protein source for corona formation (referred to as the `personalized protein corona'). In this study, we demonstrate that graphene oxide (GO) sheets can trigger different biological responses in the presence of coronas obtained from various types of diseases. GO sheets were incubated with plasma from human subjects with different diseases/conditions, including hypofibrinogenemia, blood cancer, thalassemia major, thalassemia minor, rheumatism, fauvism, hypercholesterolemia, diabetes, and pregnancy. Identical sheets coated with varying protein corona decorations exhibited significantly different cellular toxicity, apoptosis, and uptake, reactive oxygen species production, lipid peroxidation and nitrogen oxide levels. The results of this report will help researchers design efficient and safe, patient-specific nano biomaterials in a disease type-specific manner for clinical and biological applications. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr00520e

Forced tearing of ductile and brittle thin sheets.

PubMed

Tallinen, T; Mahadevan, L

2011-12-09

Tearing a thin sheet by forcing a rigid object through it leads to complex crack morphologies; a single oscillatory crack arises when a tool is driven laterally through a brittle sheet, while two diverging cracks and a series of concertinalike folds forms when a tool is forced laterally through a ductile sheet. On the other hand, forcing an object perpendicularly through the sheet leads to radial petallike tears in both ductile and brittle materials. To understand these different regimes we use a combination of experiments, simulations, and simple theories. In particular, we describe the transition from brittle oscillatory tearing via a single crack to ductile concertina tearing with two tears by deriving laws that describe the crack paths and wavelength of the concertina folds and provide a simple phase diagram for the morphologies in terms of the material properties of the sheet and the relative size of the tool.

Single objective light-sheet microscopy for high-speed whole-cell 3D super-resolution

DOE PAGES

Meddens, Marjolein B. M.; Liu, Sheng; Finnegan, Patrick S.; ...

2016-01-01

Here, we have developed a method for performing light-sheet microscopy with a single high numerical aperture lens by integrating reflective side walls into a microfluidic chip. These 45° side walls generate light-sheet illumination by reflecting a vertical light-sheet into the focal plane of the objective. Light-sheet illumination of cells loaded in the channels increases image quality in diffraction limited imaging via reduction of out-of-focus background light. Single molecule super-resolution is also improved by the decreased background resulting in better localization precision and decreased photo-bleaching, leading to more accepted localizations overall and higher quality images. Moreover, 2D and 3D single moleculemore » super-resolution data can be acquired faster by taking advantage of the increased illumination intensities as compared to wide field, in the focused light-sheet.« less

TH-AB-209-04: 3D Light Sheet Luminescence Imaging with Cherenkov Radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruza, P; Lin, H; Jarvis, L

Purpose: To recover a three-dimensional density distribution of luminescent molecular probes located several centimeters deep within a highly scattering tissue. Methods: We developed a novel sheet beam Cherenkov-excited luminescence scanned imaging (CELSI) methodology. The sample was irradiated by a horizontally oriented, vertically scanned 6 MV X-ray sheet beam (200mm × 5mm, 0.2mm vertical step) from a radiotherapy linear accelerator. The resulting Cherenkov light emission – and thus luminescent probe excitation – occurred exclusively along the irradiation plane due to a short diffusion path of secondary particles and Cherenkov photons. Cherenkov-excited luminescence was detected orthogonally to the sheet beam by gated,more » intensified charge coupled device camera. Analogously to light sheet microscopy, a series of luminescence images was taken for varied axial positions (depths) of the Cherenkov light sheet in sample. Knowledge of the excitation plane position allowed a 3D image stack deconvolution and depth-variant attenuation correction. The 3D image post-processing yielded a true spatial density distribution of luminescent molecules in highly scattering tissue. Results: We recovered a three-dimensional shape and position of 400 µL lesion-mimicking phantom tubes containing 25 µM solution of PtG4 molecular probe from 3 centimeter deep tissue-like media. The high sensitivity of CELSI also allowed resolving 100 micron capillaries of test solution. Functional information of partial oxygen pressure at the site of PtG4 molecular probe was recovered from luminescence lifetime CELSI. Finally, in-vivo sheet beam CELSI localized milimeter-sized PtG4-labelled tumor phantoms in multiple biological objects (hairless mice) from single scan. Conclusion: Presented sheet beam CELSI technique greatly extended the useful depth range of luminescence molecular imaging. More importantly, the light sheet microscopy approach was successfully adapted to CELSI, providing means to recover a completely attenuation-corrected 3D image of luminescent probe distribution. Gated CELSI acquisition yielded functional information of a spatially resolved oxygen concentration map of deep lying targets. This work was supported by NIH research grant R01CA109558 and R21EB017559, as well as by Pilot Grant Funds from the Norris Cotton Cancer Center.« less

Market Research on Law School Student Aid Award Letters and Shopping Sheet Information. NASFAA Consumer Information & Law Student Indebtedness Task Force Report

ERIC Educational Resources Information Center

National Association of Student Financial Aid Administrators, 2016

2016-01-01

"Market Research on Law School Student Aid Award Letters and Shopping Sheet Information" set out to identify through consumer testing what information on the financial aid award letter and U.S. Department of Education's (ED) Shopping Sheet could be modified to create a document that better assists students applying to, or currently…

Fuels planning: science synthesis and integration; social issues fact sheet 06: Important considerations for communicating about hazards

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Effective public education and communication campaigns about wildland fire and fuels management should have clear objectives, and use the right techniques to achieve these objectives. This fact sheet lists seven important considerations for planning or implementing a hazard communication effort.

Topical Silicone Sheet Application in the Treatment of Hypertrophic Scars and Keloids.

PubMed

Westra, Iris; Pham, Hth; Niessen, Frank B

2016-10-01

Objective: Since the early 1980s, topical silicone sheets have been used in the treatment of hypertrophic scars and keloids.This study aimed to determine the optimal duration and application of these sheets. Design: multi-centered therapeutic study. Setting and participants: A total of 224 patients were included in this study; 205 patients with hypertrophic scars and 19 patients with keloids. Patients received treatment with a topical silicone sheet. Treated scars varied in age, ranging from two weeks to 62 years and treatment time ranged from one month to 16 months. Assessment of the scars was performed by the use of standardized study forms and digital photography. Measurements: Skin therapists objectively assessed the scars on its color, thickness, and elasticity. Patients themselves subjectively assessed their perception of their scar and their experience with the usage of the topical silicone sheet. Results: After applying the topical silicone sheet, all scars, regardless of type of scar and maturity, improved significantly in color, thickness, and elasticity. Conclusion: In this study, treatment with the topical silicone sheet showed significant improvement on both hypertrophic scars and keloids. Best results were reached when the silicone sheet was applied at least four hours per day.

Controllable curvature from planar polymer sheets in response to light.

PubMed

Hubbard, Amber M; Mailen, Russell W; Zikry, Mohammed A; Dickey, Michael D; Genzer, Jan

2017-03-22

The ability to change shape and control curvature in 3D structures starting from planar sheets can aid in assembly and add functionality to an object. Herein, we convert planar sheets of shape memory polymers (SMPs) into 3D objects with controllable curvature by dictating where the sheets shrink. Ink patterned on the surface of the sheet absorbs infrared (IR) light, resulting in localized heating, and the material shrinks locally wherever the temperature exceeds the activation temperature, T a . We introduce two different mechanisms for controlling curvature within SMP sheets. The 'direct' mechanism uses localized shrinkage to induce curvature only in regions patterned with ink. The 'indirect' mechanism uses localized shrinkage in regions patterned with ink to induce curvature in neighboring regions without ink through a balance of internal stresses. Finite element analysis predicts the final shape of the polymer sheets with excellent qualitative agreement with experimental studies. Results from this study show that curvature can be controlled by the distribution and darkness of the ink pattern on the polymer sheet. Additionally, we utilize the direct and indirect curvature mechanisms to demonstrate the formation and actuation of gripper devices, which represent the potential utility of this approach.

Energy information sheets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-12-02

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the general public. Written for the general public, the EIA publication Energy Information Sheets was developed to provide information on various aspects of fuel production, prices, consumption and capability. The information contained herein pertains to energy data as of December 1991. Additional information on related subject matter can be found in other EIA publications as referenced at the end of each sheet.

Home Economics--A Look--A Job--A Future. A Course of Study at a Pre-Vocational Level for 7th and/or 8th Grade.

ERIC Educational Resources Information Center

Oklahoma City Public School System, OK. Dept. of Home Economics.

Prevocational materials for use at the seventh and/or eighth grade levels are presented in this curriculum guide. Materials cover six areas, each consisting of several instructional units planned for more than one lesson or class period. Each unit includes behavioral objectives, suggested activities for teacher and students, information sheets,…

IDEAS.

ERIC Educational Resources Information Center

Young, Sharon L.

1991-01-01

Presented are four activities that focus on gathering and interpreting data about pizza as a basis for integrating mathematics, health, and social studies. Reproducible sheets for parents to use with their children, class-activity sheets, and a data sheet are provided. Each activity includes the objective, needed materials, directions, extensions,…

Large Ice Discharge From the Greenland Ice Sheet

NASA Technical Reports Server (NTRS)

Rignot, Eric

1999-01-01

The objectives of this work are to measure the ice discharge of the Greenland Ice Sheet close to the grounding line and/or calving front, and compare the results with mass accumulation and ablation in the interior to estimate the ice sheet mass balance.

Drafting. Competency Based Curriculum.

ERIC Educational Resources Information Center

Everly, Al; And Others

This competency based drafting curriculum is presented in seven specialization sections with units in each section containing a competency statement, performance objective, learning activities, evaluation, and quiz or problem sheets. Some units also contain answer sheets and/or handout sheets. Sections and number of units presented are (1) basic…

33 CFR 331.6 - Filing an appeal.

Code of Federal Regulations, 2010 CFR

2010-07-01

... objections to the permit. The district engineer, upon evaluation of the applicant's objections, may: Modify... such modified permit to the applicant, enclosing an NAP fact sheet and an RFA form as well. Should the... an NAP fact sheet, RFA form, and a copy of the decision document for the project. If the district...

75 FR 8771 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-25

... information relative to such member's financial condition as disclosed in its most recent balance sheet... an alternative means of satisfying the requirement that members make balance sheet information... financial condition as disclosed in its most recent balance sheet * * *.'' FINRA proposed providing members...

Mechanical Drafting with CAD. Teacher Edition.

ERIC Educational Resources Information Center

McClain, Gerald R.

This instructor's manual contains 13 units of instruction for a course on mechanical drafting with options for using computer-aided drafting (CAD). Each unit includes some or all of the following basic components of a unit of instruction: objective sheet, suggested activities for the teacher, assignment sheets and answers to assignment sheets,…

Database for the geologic map of upper Eocene to Holocene volcanic and related rocks in the Cascade Range, Washington

USGS Publications Warehouse

Barron, Andrew D.; Ramsey, David W.; Smith, James G.

2014-01-01

This digital database contains information used to produce the geologic map published as Sheet 1 in U.S. Geological Survey Miscellaneous Investigations Series Map I-2005. (Sheet 2 of Map I-2005 shows sources of geologic data used in the compilation and is available separately). Sheet 1 of Map I-2005 shows the distribution and relations of volcanic and related rock units in the Cascade Range of Washington at a scale of 1:500,000. This digital release is produced from stable materials originally compiled at 1:250,000 scale that were used to publish Sheet 1. The database therefore contains more detailed geologic information than is portrayed on Sheet 1. This is most noticeable in the database as expanded polygons of surficial units and the presence of additional strands of concealed faults. No stable compilation materials exist for Sheet 1 at 1:500,000 scale. The main component of this digital release is a spatial database prepared using geographic information systems (GIS) applications. This release also contains links to files to view or print the map sheet, main report text, and accompanying mapping reference sheet from Map I-2005. For more information on volcanoes in the Cascade Range in Washington, Oregon, or California, please refer to the U.S. Geological Survey Volcano Hazards Program website.

SeaRISE: A Multidisciplinary Research Initiative to Predict Rapid Changes in Global Sea Level Caused by Collapse of Marine Ice Sheets

NASA Technical Reports Server (NTRS)

Bindschadler, Robert A. (Editor)

1990-01-01

The results of a workshop held to discuss the role of the polar ice sheets in global climate change are reported. The participants agreed that the most important aspect of the ice sheets' involvement in climate change is the potential of marine ice sheets to cause a rapid change in global sea level. To address this concern, a research initiative is called for that considers the full complexity of the coupled atmosphere-ocean-cryosphere-lithosphere system. This initiative, called SeaRISE (Sea-level Response to Ice Sheet Evolution) has the goal of predicting the contribution of marine ice sheets to rapid changes in global sea level in the next decade to few centuries. To attain this goal, a coordinated program of multidisciplinary investigations must be launched with the linked objectives of understanding the current state, internal dynamics, interactions, and history of this environmental system. The key questions needed to satisfy these objectives are presented and discussed along with a plan of action to make the SeaRISE project a reality.

Quick Information Sheets. 1988.

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. Trace Center.

The Trace Center gathers and organizes information on communication, control, and computer access for handicapped individuals. The information is disseminated in the form of brief sheets describing print, nonprint, and organizational resources and listing addresses and telephone numbers for ordering or for additional information. This compilation…

LITE microscopy: Tilted light-sheet excitation of model organisms offers high resolution and low photobleaching

PubMed Central

Gerbich, Therese M.; Rana, Kishan; Suzuki, Aussie; Schaefer, Kristina N.; Heppert, Jennifer K.; Boothby, Thomas C.; Allbritton, Nancy L.; Gladfelter, Amy S.; Maddox, Amy S.

2018-01-01

Fluorescence microscopy is a powerful approach for studying subcellular dynamics at high spatiotemporal resolution; however, conventional fluorescence microscopy techniques are light-intensive and introduce unnecessary photodamage. Light-sheet fluorescence microscopy (LSFM) mitigates these problems by selectively illuminating the focal plane of the detection objective by using orthogonal excitation. Orthogonal excitation requires geometries that physically limit the detection objective numerical aperture (NA), thereby limiting both light-gathering efficiency (brightness) and native spatial resolution. We present a novel live-cell LSFM method, lateral interference tilted excitation (LITE), in which a tilted light sheet illuminates the detection objective focal plane without a sterically limiting illumination scheme. LITE is thus compatible with any detection objective, including oil immersion, without an upper NA limit. LITE combines the low photodamage of LSFM with high resolution, high brightness, and coverslip-based objectives. We demonstrate the utility of LITE for imaging animal, fungal, and plant model organisms over many hours at high spatiotemporal resolution. PMID:29490939

Quantitative and qualitative analysis of study-related patient information sheets in randomised neuro-oncology phase III-trials.

PubMed

Reinert, Christiane; Kremmler, Lukas; Burock, Susen; Bogdahn, Ulrich; Wick, Wolfgang; Gleiter, Christoph H; Koller, Michael; Hau, Peter

2014-01-01

In randomised controlled trials (RCTs), patient informed consent documents are an essential cornerstone of the study flow. However, these documents are often oversized in format and content. Clinical experience suggests that study information sheets are often not used as an aid to decision-making due to their complexity. We analysed nine patient informed consent documents from clinical neuro-oncological phase III-studies running at a German Brain Tumour Centre with the objective to investigate the quality of these documents. Text length, formal layout, readability, application of ethical and legal requirements, scientific evidence and social aspects were used as rating categories. Results were assessed quantitatively by two independents investigators and were depicted using net diagrams. All patient informed consent documents were of insufficient quality in all categories except that ethical and legal requirements were fulfilled. Notably, graduate levels were required to read and understand five of nine consent documents. Quality deficits were consistent between the individual study information texts. Irrespective of formal aspects, a document that is intended to inform and motivate patients to participate in a study needs to be well-structured and understandable. We therefore strongly mandate to re-design patient informed consent documents in a patient-friendly way. Specifically, standardised components with a scientific foundation should be provided that could be retrieved at various times, adapted to the mode of treatment and the patient's knowledge, and could weigh information dependent of the stage of treatment decision. Copyright © 2013 Elsevier Ltd. All rights reserved.

Fuels planning: science synthesis and integration; social issues fact sheet 03: Developing personal responsibility for fuels reduction: More ways to catch and hold people's attention

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Other fact sheets discuss the different types of information that are useful in explaining to property owners the importance of taking personal responsibility for fuels management on their land. However, for some property owners, new information is not enough-they may need more information in order to understand that change is necessary. This fact sheet discusses ways...

Imaging of trabecular meshwork using Bessel-Gauss light sheet with fluorescence

NASA Astrophysics Data System (ADS)

Jie Jeesmond Hong, Xun; Shinoj, V. K.; Murukeshan, V. M.; Baskaran, M.; Aung, Tin

2017-03-01

Ocular imaging technology that holds promise for both fundamental investigation and clinical detection of glaucoma is still a challenging research area. A direct view of the trabecular meshwork (TM) with high resolution is not generally possible because the iridocorneal angle region is obstructed by the sclera overlap. The best approach to observe the aqueous outflow system (AOS) is therefore to view from the opposite angle. In this research work, we developed two imaging systems for the high resolution ex vivo studies of the AOS inside porcine eye, based on a Gaussian illuminated and a digitally scanned Bessel-Gauss beam light sheet fluorescence configurations. The digitally scanned Bessel-Gauss beam is able to overcome the trade-off between the length and thickness of the Gaussian light sheet to give better imaging performance. It has adequate spatial resolution to resolve critical anatomical structures such as the TM, thereby enabling objective information about the AOS. This non-contact and non-invasive imaging methodology with excellent safety profile is expected to be well received by vision researchers and clinicians in the evaluation and management of glaucoma.

Gaps and Pathways Project: driving pathways by diagnosis sheets.

PubMed

Touchinsky, Susan; Chew, Felicia; Davis, Elin Schold

2014-04-01

This paper describes the development and use of information sheets for occupational therapy practitioners to use as guides for evaluation and intervention planning to address their client's driving and community mobility needs. Called Driving Pathways by Diagnosis Sheets, the information assists therapists with direction to connect impairment to driving risk and incorporate intervention to client goals and priorities related to driving and community mobility. An example of one of the sheets for the diagnosis of arthritis is highlighted and implications for use are discussed.

Epilepsy: General Information. Fact Sheet Number 6 = La Epilepsia: Informacion General. Fact Sheet Number 20.

ERIC Educational Resources Information Center

Interstate Research Associates, McLean, VA.

This fact sheet on epilepsy is offered in both English and Spanish. It provides a definition, information on incidence, typical characteristics, and educational implications. It notes that epilepsy is classified as "other health impaired" under the Individuals with Disabilities Education Act and that students with epilepsy are eligible for special…

Autism: General Information. Fact Sheet Number 1 = Autismo: Informacion General. Fact Sheet Number 22.

ERIC Educational Resources Information Center

Interstate Research Associates, McLean, VA.

This fact sheet on autism is offered in both English and Spanish, and is the same in both languages although numbered differently. It provides a definition, information on incidence, typical characteristics, and educational implications. It notes that autism is listed as a separate category under the Individuals with Disabilities Education Act.…

The Internet Gopher: An Information Sheet.

ERIC Educational Resources Information Center

Electronic Networking: Research, Applications and Policy, 1992

1992-01-01

This fact sheet about the INTERNET Gopher, an information distribution system combining features of electronic bulletin board services and databases, describes information availability, gateways with other servers, how the system works, and how to access Gopher. Addresses and telephone numbers for additional information or news about Gopher are…

Final NPDES Electronic Reporting Rule Fact Sheet

EPA Pesticide Factsheets

Fact sheet explaining the National Pollution Discharge Elimination System (NPDES) Electronic Reporting Rule. The fact sheet provides information on the purpose of the rule, benefits and implementation.

Fact Sheets from the ERIC Clearinghouse on Handicapped and Gifted Children, 1980.

ERIC Educational Resources Information Center

ERIC Clearinghouse on Handicapped and Gifted Children, Reston, VA.

The document is a compilation of 15 fact sheets developed during 1980 by the ERIC Clearinghouse on Handicapped and Gifted Children. Fact sheets are single sheets which provide basic information in a question-answer format and include additional resources and references. The fact sheets have the following titles: "Sex Education for Retarded…

Chemical Data Reporting Fact Sheet: Basic Information

EPA Pesticide Factsheets

EPA collects information on the types and quantities of chemicals produced in the U.S under the Chemical Data Reporting (CDR) requirements. This fact sheet outlines key information about CDR, including what data are collected and how the data are used.

Area Reports. Advanced materials and devices research area. Silicon materials research task, and advanced silicon sheet task

NASA Technical Reports Server (NTRS)

1986-01-01

The objectives of the Silicon Materials Task and the Advanced Silicon Sheet Task are to identify the critical technical barriers to low-cost silicon purification and sheet growth that must be overcome to produce a PV cell substrate material at a price consistent with Flat-plate Solar Array (FSA) Project objectives and to overcome these barriers by performing and supporting appropriate R&D. Progress reports are given on silicon refinement using silane, a chemical vapor transport process for purifying metallurgical grade silicon, silicon particle growth research, and modeling of silane pyrolysis in fluidized-bed reactors.

75 FR 45144 - Recovery Fact Sheet 9580.203, Debris Monitoring

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-02

...] Recovery Fact Sheet 9580.203, Debris Monitoring AGENCY: Federal Emergency Management Agency, DHS. ACTION... accepting comments on Recovery Fact Sheet 9580.203, Debris Monitoring. DATES: Comments must be received by... guidelines. Specifically, the fact sheet provides information on debris monitoring roles and responsibilities...

Animal Dissection. [Fact Sheet and Resource List Information Packet from the Humane Society of the United States].

ERIC Educational Resources Information Center

Balcombe, Jonathan

Killing animals for classroom dissection causes animal suffering, cheapens the value of life, and depletes wild animal populations, yet it remains commonplace. The Humane Society of the United States (HSUS) addresses the issue in this information packet which includes a fact sheet and three resource lists "on Dissection." The fact sheet discusses…

General Information about Learning Disabilities (Fact Sheet Number 7) = Informacion General sobre Impedimentos en el Aprendizaje (Fact Sheet Number 19).

ERIC Educational Resources Information Center

Interstate Research Associates, Inc., Washington, DC.

This fact sheet providing general information about learning disabilities is presented in both English and Spanish versions. It begins with the federal definition of learning disabilities and a discussion of its implications followed by estimates of incidence. Typical characteristics of students with learning disabilities are then summarized as…

Flat-plate solar array project. Volume 3: Silicon sheet: Wafers and ribbons

NASA Technical Reports Server (NTRS)

Briglio, A.; Dumas, K.; Leipold, M.; Morrison, A.

1986-01-01

The primary objective of the Silicon Sheet Task of the Flat-Plate Solar Array (FSA) Project was the development of one or more low cost technologies for producing silicon sheet suitable for processing into cost-competitive solar cells. Silicon sheet refers to high purity crystalline silicon of size and thickness for fabrication into solar cells. Areas covered in the project were ingot growth and casting, wafering, ribbon growth, and other sheet technologies. The task made and fostered significant improvements in silicon sheet including processing of both ingot and ribbon technologies. An additional important outcome was the vastly improved understanding of the characteristics associated with high quality sheet, and the control of the parameters required for higher efficiency solar cells. Although significant sheet cost reductions were made, the technology advancements required to meet the task cost goals were not achieved.

Acronyms and the Law. Alliance Action Information Sheets

ERIC Educational Resources Information Center

Technical Assistance ALLIANCE for Parent Centers, 2007

2007-01-01

This paper presents acronyms related to early intervention, education, special education, and other laws important to individuals with disabilities and their families. For related information, also read Acronyms and Agencies. [For related report, "Acronyms and Agencies. Alliance Action Information Sheets," see ED534053.

Low cost light-sheet microscopy for whole brain imaging

NASA Astrophysics Data System (ADS)

Kumar, Manish; Nasenbeny, Jordan; Kozorovitskiy, Yevgenia

2018-02-01

Light-sheet microscopy has evolved as an indispensable tool in imaging biological samples. It can image 3D samples at fast speed, with high-resolution optical sectioning, and with reduced photobleaching effects. These properties make light-sheet microscopy ideal for imaging fluorophores in a variety of biological samples and organisms, e.g. zebrafish, drosophila, cleared mouse brains, etc. While most commercial turnkey light-sheet systems are expensive, the existing lower cost implementations, e.g. OpenSPIM, are focused on achieving high-resolution imaging of small samples or organisms like zebrafish. In this work, we substantially reduce the cost of light-sheet microscope system while targeting to image much larger samples, i.e. cleared mouse brains, at single-cell resolution. The expensive components of a lightsheet system - excitation laser, water-immersion objectives, and translation stage - are replaced with an incoherent laser diode, dry objectives, and a custom-built Arduino-controlled translation stage. A low-cost CUBIC protocol is used to clear fixed mouse brain samples. The open-source platforms of μManager and Fiji support image acquisition, processing, and visualization. Our system can easily be extended to multi-color light-sheet microscopy.

Developing an informational tool for ethical engagement in medical tourism.

PubMed

Adams, Krystyna; Snyder, Jeremy; Crooks, Valorie A; Johnston, Rory

2017-08-25

Medical tourism, the practice of persons intentionally travelling across international boundaries to access medical care, has drawn increasing attention from researchers, particularly in relation to potential ethical concerns of this practice. Researchers have expressed concern for potential negative impacts to individual safety, public health within both countries of origin for medical tourists and destination countries, and global health equity. However, these ethical concerns are not discussed within the sources of information commonly provided to medical tourists, and as such, medical tourists may not be aware of these concerns when engaging in medical tourism. This paper describes the methodology utilized to develop an information sheet intended to be disseminated to Canadian medical tourists to encourage contemplation and further public discussion of the ethical concerns in medical tourism. The methodology for developing the information sheet drew on an iterative process to consider stakeholder feedback on the content and use of the information sheet as it might inform prospective medical tourists' decision making. This methodology includes a literature review as well as formative research with Canadian public health professionals and former medical tourists. The final information sheet underwent numerous revisions throughout the formative research process according to feedback from medical tourism stakeholders. These revisions focused primarily on making the information sheet concise with points that encourage individuals considering travelling for medical tourism to do further research regarding their safety both within the destination country, while travelling, and once returning to Canada, and the potential impacts of their trip on third parties. This methodology may be replicated for the development of information sheets intending to communicate ethical concerns of other practices to providers or consumers of a certain service.

Issues in subsurface exploration of ice sheets

NASA Technical Reports Server (NTRS)

French, L.; Carsey, F.; Zimmerman, W.

2000-01-01

Exploration of the deep subsurface ice sheets of Earth, Mars, Europa, and Titan has become a major consideration in addressing scientific objectives in climate change, extremophile biology, exobiology,chemical weathering, planetary evolution and ice dynamics.

Validation and Design of Sheet Retrofits

DTIC Science & Technology

2010-10-31

enough to allow for rotation of the top of the wall without development of an axial force. Obviously, these walls are not load bearing . This type...structures are commonly constructed using CMU blocks to infill non- load bearing walls (Hammons, 1999). Many of these structures were built in a... axial loads within the sheet. 3 Figure 1. Infill Masonry Wall Retrofit Concept 2.1. Objective The objective of the research documented in

Improved Production Of Wrought Articles From Powders

NASA Technical Reports Server (NTRS)

Thomas, James R.; Singleton, Ogle R.

1994-01-01

Improved technique for consolidation of powders into dense articles developed. Peripheral bands used in consolidation, forging, and rolling operations. Facilitates consolidation of dispersion-hardened aluminous powders and composite mixtures for processing to such useful wrought articles as plates and sheets. Potential use in production of plates and sheets and perhaps other objects from "hard" powders, particularly from powders, objects made from which have propensity to crack when mechanically worked to other forms.

Acronyms and Agencies. Alliance Action Information Sheets

ERIC Educational Resources Information Center

Technical Assistance ALLIANCE for Parent Centers, 2007

2007-01-01

This paper presents acronyms related to early intervention, education, special education, and other laws important to individuals with disabilities and their families. For related information, also read Acronyms and the Law. [For related report, "Acronyms and the Law. Alliance Action Information Sheets," see ED534052.

Final Rule to Reduce Toxic Air Pollutants from Surface Coating of Plastic Parts and Products Fact Sheet

EPA Pesticide Factsheets

This page contains an August 2004 fact sheet with information regarding the final NESHAP for Surface Coating of Plastic Parts and Products. This document provides a summary of the information for the information for this regulation.

Clean Energy Solutions Center and SE4All: Partnering to Support Country Actions

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-05-01

Since 2012, the Clean Energy Solutions Center (Solutions Center) and Sustainable Energy for All (SE4All) have partnered to deliver information, knowledge and expert assistance to policymakers and practitioners in countries actively working to achieve SE4All objectives. Through SE4All efforts, national governments are implementing integrated country actions to strategically transform their energy markets. This fact sheet details the Solutions Center and SE4All partnership and available areas of technical assistance.

High-speed volume measurement system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lane, Michael H.; Doyle, Jr., James L.; Brinkman, Michael J.

2018-01-30

Disclosed is a volume sensor having a first axis, a second axis, and a third axis, each axis including a laser source configured to emit a beam; a parallel beam generating assembly configured to receive the beam and split the beam into a first parallel beam and a second parallel beam, a beam-collimating assembly configured to receive the first parallel beam and the second parallel beam and output a first beam sheet and a second beam sheet, the first beam sheet and the second beam sheet being configured to traverse the object aperture; a first collecting lens and a secondmore » collecting lens; and a first photodetector and a second photodetector, the first photodetector and the second photodetector configured to output an electrical signal proportional to the object; wherein the first axis, the second axis, and the third axis are arranged at an angular offset with respect to each other.« less

Integrated System Health Management (ISHM) for Test Stand and J-2X Engine: Core Implementation

NASA Technical Reports Server (NTRS)

Figueroa, Jorge F.; Schmalzel, John L.; Aguilar, Robert; Shwabacher, Mark; Morris, Jon

2008-01-01

ISHM capability enables a system to detect anomalies, determine causes and effects, predict future anomalies, and provides an integrated awareness of the health of the system to users (operators, customers, management, etc.). NASA Stennis Space Center, NASA Ames Research Center, and Pratt & Whitney Rocketdyne have implemented a core ISHM capability that encompasses the A1 Test Stand and the J-2X Engine. The implementation incorporates all aspects of ISHM; from anomaly detection (e.g. leaks) to root-cause-analysis based on failure mode and effects analysis (FMEA), to a user interface for an integrated visualization of the health of the system (Test Stand and Engine). The implementation provides a low functional capability level (FCL) in that it is populated with few algorithms and approaches for anomaly detection, and root-cause trees from a limited FMEA effort. However, it is a demonstration of a credible ISHM capability, and it is inherently designed for continuous and systematic augmentation of the capability. The ISHM capability is grounded on an integrating software environment used to create an ISHM model of the system. The ISHM model follows an object-oriented approach: includes all elements of the system (from schematics) and provides for compartmentalized storage of information associated with each element. For instance, a sensor object contains a transducer electronic data sheet (TEDS) with information that might be used by algorithms and approaches for anomaly detection, diagnostics, etc. Similarly, a component, such as a tank, contains a Component Electronic Data Sheet (CEDS). Each element also includes a Health Electronic Data Sheet (HEDS) that contains health-related information such as anomalies and health state. Some practical aspects of the implementation include: (1) near real-time data flow from the test stand data acquisition system through the ISHM model, for near real-time detection of anomalies and diagnostics, (2) insertion of the J-2X predictive model providing predicted sensor values for comparison with measured values and use in anomaly detection and diagnostics, and (3) insertion of third-party anomaly detection algorithms into the integrated ISHM model.

Can I look at my list? An evaluation of a 'prompt sheet' within an oncology outpatient clinic.

PubMed

Glynne-Jones, R; Ostler, P; Lumley-Graybow, S; Chait, I; Hughes, R; Grainger, J; Leverton, T J

2006-06-01

We introduced a patient 'prompt sheet' into our clinic between January 2004 and January 2005. The aim was to determine whether it would facilitate communication and help patients in obtaining their desired level of information about their illness, and assist with decision making. We conducted an audit survey to investigate the way follow-up takes place in our oncology clinic, to determine what works and what does not work in the clinic, and to examine how patients access the most useful information and to assess the utility of, and patient satisfaction with, a locally developed pilot prompt sheet. A single questionnaire was designed to elicit information on patients' information needs, overall satisfaction with the oncology clinic, and uptake and perceived usefulness of the prompt sheet. We carried out an audit survey in the form of a Likert-scale questionnaire (33 questions), followed immediately afterwards by a semi-structured interview. A specialist nurse asked a range of open questions about what was good and bad about the clinic and the prompt sheets. Despite efforts to ensure that all patients received the prompt-sheet leaflets, only 254 out of 300 (85%) received them. Of these, 195 (65%) felt that they were 'very helpful', and 30 (10%) found them 'fairly helpful'. However, 15 (5%) had no strong feelings and only three found them either fairly or completely unhelpful. One-third of the patients were able to ask more questions about their disease as a result of the prompt sheet, although they felt the doctor was busy and did not want to take up too much of their time. Men with prostate cancer found the prompt sheet particularly helpful to ask questions. This satisfaction audit suggests that our pilot prompt sheet is helpful to patients attending oncology outpatient appointments, particularly for men with prostate cancer. We aim to adapt the present prompt sheet on the basis of the replies obtained, and re-audit in the future.

Predicting Ice Sheet and Climate Evolution at Extreme Scales

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heimbach, Patrick

2016-02-06

A main research objectives of PISCEES is the development of formal methods for quantifying uncertainties in ice sheet modeling. Uncertainties in simulating and projecting mass loss from the polar ice sheets arise primarily from initial conditions, surface and basal boundary conditions, and model parameters. In general terms, two main chains of uncertainty propagation may be identified: 1. inverse propagation of observation and/or prior onto posterior control variable uncertainties; 2. forward propagation of prior or posterior control variable uncertainties onto those of target output quantities of interest (e.g., climate indices or ice sheet mass loss). A related goal is the developmentmore » of computationally efficient methods for producing initial conditions for an ice sheet that are close to available present-day observations and essentially free of artificial model drift, which is required in order to be useful for model projections (“initialization problem”). To be of maximum value, such optimal initial states should be accompanied by “useful” uncertainty estimates that account for the different sources of uncerainties, as well as the degree to which the optimum state is constrained by available observations. The PISCEES proposal outlined two approaches for quantifying uncertainties. The first targets the full exploration of the uncertainty in model projections with sampling-based methods and a workflow managed by DAKOTA (the main delivery vehicle for software developed under QUEST). This is feasible for low-dimensional problems, e.g., those with a handful of global parameters to be inferred. This approach can benefit from derivative/adjoint information, but it is not necessary, which is why it often referred to as “non-intrusive”. The second approach makes heavy use of derivative information from model adjoints to address quantifying uncertainty in high-dimensions (e.g., basal boundary conditions in ice sheet models). The use of local gradient, or Hessian information (i.e., second derivatives of the cost function), requires additional code development and implementation, and is thus often referred to as an “intrusive” approach. Within PISCEES, MIT has been tasked to develop methods for derivative-based UQ, the ”intrusive” approach discussed above. These methods rely on the availability of first (adjoint) and second (Hessian) derivative code, developed through intrusive methods such as algorithmic differentiation (AD). While representing a significant burden in terms of code development, derivative-baesd UQ is able to cope with very high-dimensional uncertainty spaces. That is, unlike sampling methods (all variations of Monte Carlo), calculational burden is independent of the dimension of the uncertainty space. This is a significant advantage for spatially distributed uncertainty fields, such as threedimensional initial conditions, three-dimensional parameter fields, or two-dimensional surface and basal boundary conditions. Importantly, uncertainty fields for ice sheet models generally fall into this category.« less

Ice sheet radar altimetry

NASA Technical Reports Server (NTRS)

Zwally, J.

1988-01-01

The surface topography of the Greenland and Antarctic ice sheets between 72 degrees north and south was mapped using radar altimetry data from the U.S. Navy GEOSAT. The glaciological objectives of this activity were to study the dynamics of the ice flow, changes in the position of floating ice-shelf fronts, and ultimately to measure temporal changes in ice surface elevation indicative of ice sheet mass balance.

Small Municipal Waste Combustion Units Air Toxics Rules Fact Sheets

EPA Pesticide Factsheets

This page contains several fact sheets with information regarding the final New Source Performance Standards (NSPS), Emission Guidelines, and Compliance Times regulations. This document provides a summary of the information for these regulations.

2012 Swimming Season Fact Sheets

EPA Pesticide Factsheets

To help beachgoers make informed decisions about swimming at U.S. beaches, EPA annually publishes state-by-state data about beach closings and advisories for the previous year's swimming season. These fact sheets summarize that information by state.

Tug fleet and ground operations schedules and controls. Volume 2: Part 3, appendixes

NASA Technical Reports Server (NTRS)

1975-01-01

A space tug function description data sheet is prepared for each block of the space tug functional flow diagram. A summary of the basic information regarding the activities performed in its respective functional block is provided. The sheets are catalogued by functional flow block numbers with reference blocks at the end. The specific items of information contained in each data sheet are defined.

Certificates in English Language Literacies (CELL). ARIS Information Sheet.

ERIC Educational Resources Information Center

Language Australia, Melbourne (Victoria). Adult Education Resource and Information Service.

This information sheet will assist teachers and coordinators in determining the suitability of the Certificates in English Language Literacies (CELL) curriculum for use by examining the potential target group of learners. This information also provides an overview of some of CELL's organizing features and its framework. Topics covered include:…

40 CFR 370.42 - What is Tier II inventory information?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Confidential and Non-Confidential Information Sheets and all attachments. All other pages must also contain..., the city, county, State and zip code. (d) The North American Industry Classification System (NAICS... “confidential.” You must provide the confidential location information on a separate sheet from the other Tier...

40 CFR 370.42 - What is Tier II inventory information?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Confidential and Non-Confidential Information Sheets and all attachments. All other pages must also contain..., the city, county, State and zip code. (d) The North American Industry Classification System (NAICS... “confidential.” You must provide the confidential location information on a separate sheet from the other Tier...

EnviroAtlas - Austin, TX - Historic Places by Census Block Group

EPA Pesticide Factsheets

This EnviroAtlas dataset portrays the total number of historic places located within each Census Block Group (CBG). The historic places data were compiled from the National Register of Historic Places, which provides official federal lists of districts, sites, buildings, structures and objects significant to American history, architecture, archeology, engineering, and culture.This dataset was produced by the US EPA to support research and online mapping activities related to EnviroAtlas. EnviroAtlas (https://www.epa.gov/enviroatlas) allows the user to interact with a web-based, easy-to-use, mapping application to view and analyze multiple ecosystem services for the contiguous United States. The dataset is available as downloadable data (https://edg.epa.gov/data/Public/ORD/EnviroAtlas) or as an EnviroAtlas map service. Additional descriptive information about each attribute in this dataset can be found in its associated EnviroAtlas Fact Sheet (https://www.epa.gov/enviroatlas/enviroatlas-fact-sheets).

Large scale superres 3D imaging: light-sheet single-molecule localization microscopy (Conference Presentation)

NASA Astrophysics Data System (ADS)

Lu, Chieh Han; Chen, Peilin; Chen, Bi-Chang

2017-02-01

Optical imaging techniques provide much important information in understanding life science especially cellular structure and morphology because "seeing is believing". However, the resolution of optical imaging is limited by the diffraction limit, which is discovered by Ernst Abbe, i.e. λ/2(NA) (NA is the numerical aperture of the objective lens). Fluorescence super-resolution microscopic techniques such as Stimulated emission depletion microscopy (STED), Photoactivated localization microscopy (PALM), and Stochastic optical reconstruction microscopy (STORM) are invented to have the capability of seeing biological entities down to molecular level that are smaller than the diffraction limit (around 200-nm in lateral resolution). These techniques do not physically violate the Abbe limit of resolution but exploit the photoluminescence properties and labelling specificity of fluorescence molecules to achieve super-resolution imaging. However, these super-resolution techniques limit most of their applications to the 2D imaging of fixed or dead samples due to the high laser power needed or slow speed for the localization process. Extended from 2D imaging, light sheet microscopy has been proven to have a lot of applications on 3D imaging at much better spatiotemporal resolutions due to its intrinsic optical sectioning and high imaging speed. Herein, we combine the advantage of localization microscopy and light-sheet microscopy to have super-resolved cellular imaging in 3D across large field of view. With high-density labeled spontaneous blinking fluorophore and wide-field detection of light-sheet microscopy, these allow us to construct 3D super-resolution multi-cellular imaging at high speed ( minutes) by light-sheet single-molecule localization microscopy.

[To what extent do reviewers of multiple-choice questions need to be trained? A comparison between handing out information sheets and brief workshop sessions].

PubMed

Öchsner, Wolfgang; Böckers, Anja

2016-01-01

A competent review process is crucial to ensure the quality of multiple-choice (MC) questions. However, the acquisition of reviewing skills should not cause any unnecessary additional burden for a medical staff that is already facing heavy workloads. 100 MC questions, for which an expert review existed, were presented to 12 novices. In advance, six participants received a specific information sheet covering critical information for high-calibre review; the other six participants attended a 2.5-hour workshop covering the same information. The review results of both groups were analysed with a licensed version of the IBM software SPSS 19.0 (SPSS Inc., Chicago, IL). The results of the workshop group were distinctly closer to the experts' results (gold standard) than those of the information sheet group. For the quantitatively important category of medium quality MC questions, the results of the workshop group did not significantly differ from the experts' results. In the information sheet group the results were significantly poorer than the experts', regardless of the quality of the questions. Distributing specific information sheets to MC question reviewers is not sufficient for ensuring the quality of the review so that - regardless of the increased effort involved - a recommendation to conduct specific workshops must be made. Copyright © 2014. Published by Elsevier GmbH.

Fact Sheet: Revisions to New Source Performance Standards (NSPS) for Nitric Acid Plants

EPA Pesticide Factsheets

This page contains a May 2012 fact sheet with information regarding the New Source Performance Standards (NSPS) for Nitric Acid Plants. This document provides a summary of the information for this NSPS.

Fact Sheets for the Architectural Coating Rule for Volatile Organic Compounds

EPA Pesticide Factsheets

This page contains an August 1998 fact sheet with information regarding the National Volatile Organic Compounds Emission Standards for Architectural Coatings Rule. This page also contains information on applicability and compliance for this rule.

Petroleum Refineries New Source Performance Standards (NSPS) Direct Final Amendments Fact Sheet

EPA Pesticide Factsheets

This page contains a December 2013 fact sheet with information regarding the direct final rule for the NSPS for Petroleum Refineries. This document provides a summary of the information for this NSPS.

The Joanna Briggs Institute Best Practice Information Sheet: music as an intervention in hospitals.

PubMed

2011-03-01

This Best Practice Information Sheet aims to synthesize the best-available evidence on music as a therapeutic intervention for the management of anxiety or pain related to procedural or operative interventions. The information that is contained in this sheet has been derived from studies that were included in a systematic review that was conducted by The Joanna Briggs Institute. The original references can be sourced from the systematic review. Music as a therapeutic intervention is a development largely of the mid-20th century; however, it has existed in various forms in most cultures for many centuries. The Best Practice Information Sheet includes music-listening before a procedure or operation, during a procedure or operation, and after a procedure or operation. It excludes other forms of music therapy. Several recommendations for practice are made. © 2011 Blackwell Publishing Asia Pty Ltd.

[Development, implementation, and analysis of a "collaborative decision-making for reasonable care" document in pediatric palliative care].

PubMed

Paoletti, M; Litnhouvongs, M-N; Tandonnet, J

2015-05-01

In France, a legal framework and guidelines state that decisions to limit treatments (DLT) require a collaborative decision meeting and a transcription of decisions in the patient's file. The do-not-attempt-resuscitation order involves the same decision-making process for children in palliative care. To fulfill the law's requirements and encourage communication within the teams, the Resource Team in Pediatric Palliative Care in Aquitaine created a document shared by all children's hospital units, tracing the decision-making process. This study analyzed the decision-making process, quality of information transmission, and most particularly the relevance of this new "collaborative decision-making for reasonable care" card. Retrospective study evaluating the implementation of a traceable document relating the DLT process. All the data sheets collected between January and December 2013 were analyzed. A total of 58 data sheets were completed between January and December 2013. We chose to collect the most relevant data to evaluate the relevance of the items to be completed and the transmission of the document, to draw up the patients' profile, and the contents of discussions with families. Of the 58 children for whom DLT was discussed, 41 data sheets were drawn up in the pediatric intensive care unit, seven in the oncology and hematology unit, five in the neonatology unit, four in the neurology unit, and one in the pneumology unit. For 30 children, one sheet was created, for 11 children, two sheets and for two children, three sheets were filled out. Thirty-nine decisions were made for withholding lifesaving treatment, 11 withdrawing treatment, and for five children, no limitation was set. Nine children survived after DLT. Of the 58 data sheets, only 31 discussions with families were related to the content of the data sheet. Of the 14 children transferred out of the unit with a completed data sheet, it was transmitted to the new unit for 11 children (79%). The number of data sheets collected in 1 year shows the value of this document. The participation of several pediatric specialities' referents in its creation, then its progressive presentation in the children's hospital units, were essential steps in introducing and establishing its use. Items describing the situation, management proposals, and adaptation of the children's supportive care were completed in the majority of cases. They correspond to a clinical description, the object of the discussion, and the daily caregiver's practices, respectively. On the other hand, discussions with families were related to the card's contents in only 53% of the cases. This can be explained by the time required to complete the DLT process. It is difficult for referring doctors to systematically, faithfully, and objectively transcribe discussions with parents. Although this process has been used for a long time in intensive care units, this document made possible an indispensable formalisation in the decision-making process. In other pediatric specialities, the sheet allowed introducing the palliative approach and was a starter and a tool for reflection on the do-not-attempt-resuscitation order, thus suggesting the need for anticipation in these situations. With the implementation of this new document, the DLT, data transmission, and continuity of care conditions were improved in the children's hospital units. Sharing this sheet with all professionals in charge of these children would support homogeneity and quality of management and care for children and their parents. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Automatic detection of Floating Ice at Antarctic Continental Margin from Remotely Sensed Image with Object-oriented Matching

NASA Astrophysics Data System (ADS)

Zhao, Z.

2011-12-01

Changes in ice sheet and floating ices around that have great significance for global change research. In the context of global warming, rapidly changing of Antarctic continental margin, caving of ice shelves, movement of iceberg are all closely related to climate change and ocean circulation. Using automatic change detection technology to rapid positioning the melting Region of Polar ice sheet and the location of ice drift would not only strong support for Global Change Research but also lay the foundation for establishing early warning mechanism for melting of the polar ice and Ice displacement. This paper proposed an automatic change detection method using object-based segmentation technology. The process includes three parts: ice extraction using image segmentation, object-baed ice tracking, change detection based on similarity matching. An approach based on similarity matching of eigenvector is proposed in this paper, which used area, perimeter, Hausdorff distance, contour, shape and other information of each ice-object. Different time of LANDSAT ETM+ data, Chinese environment disaster satellite HJ1B date, MODIS 1B date are used to detect changes of Floating ice at Antarctic continental margin respectively. We select different time of ETM+ data(January 7, 2003 and January 16, 2003) with the area around Antarctic continental margin near the Lazarev Bay, which is from 70.27454853 degrees south latitude, longitude 12.38573410 degrees to 71.44474167 degrees south latitude, longitude 10.39252222 degrees,included 11628 sq km of Antarctic continental margin area, as a sample. Then we can obtain the area of floating ices reduced 371km2, and the number of them reduced 402 during the time. In addition, the changes of all the floating ices around the margin region of Antarctic within 1200 km are detected using MODIS 1B data. During the time from January 1, 2008 to January 7, 2008, the floating ice area decreased by 21644732 km2, and the number of them reduced by 83080. The results show that the object-based information extraction algorithm can obtain more precise details of a single object, while the change detection method based on similarity matching can effectively tracking the change of floating ice.

Site Remediation National Emission Standards for Hazardous Air Pollutants (NESHAP) Fact Sheets

EPA Pesticide Factsheets

This page contains July 2003 and May 2016 fact sheets with information regarding the final National Emission Standards for Hazardous Air Pollutants (NESHAP). This document provides a summary of the information for these regulations.

Strain and mechanical properties of the VCM multilayer sheet and their composites using the digital speckle correlation method.

PubMed

Zhang, Dehai; Xie, Guizhong; Li, Yanqin; Liu, Jianxiu

2015-09-01

The digital speckle correlation method (DSCM) is introduced to solve the challenging problems in the related geometric measurement. Theoretical calculations of strain are deduced using the DSCM. Corresponding strains along x and y directions are obtained from uniaxial tension experiments and digital speckle measurements, using the VCM nondeep drawing multilayer sheet, the VCM deep-drawing multilayer sheet, clad films, nondeep drawing substrate, and deep-drawing substrate sheet as the targeted experimental objects. The results show that the maximum strains along the x direction of the VCM nondeep drawing multilayer sheet, the VCM deep-drawing multilayer sheet, clad film, nondeep drawing substrate, and deep-drawing substrate sheet are 68.473%, 48.632%, 91.632%, 50.784% and 40.068%, respectively, while the maximum strains along the y direction are -2.657%, -15.381%, 2.826%, -9.780% and -7.783%, respectively. The mechanical properties of the VCM multilayer sheet are between those of the substrate and clad film, while mechanical properties of the VCM deep-drawing multilayer sheet are superior to those of the VCM nondeep drawing multi-layer sheet.

Spina Bifida: General Information. Fact Sheet Number 12 = La Espina Bifida: Informacion General. Fact Sheet Number 12.

ERIC Educational Resources Information Center

National Information Center for Children and Youth with Disabilities, Washington, DC.

This fact sheet offers definitions of the three types of spina bifida, outlines their incidence, describes characteristics of individuals with spina bifida, and reviews educational implications. The fact sheet emphasizes that school programs should be flexible to accommodate these students' special needs and frequent absences, that children with…

Over the counter drugs (and dietary supplement) exercise: a team-based introduction to biochemistry for health professional students.

PubMed

Phadtare, Sangita; Abali, Emine; Brodsky, Barbara

2013-01-01

For successful delivery of basic science topics for health-professional students, it is critical to reduce apprehension and illustrate relevance to clinical settings and everyday life. At the beginning of the Biochemistry course for Physician Assistants, a team-based assignment was designed to develop an understanding of the mechanism of action, effectiveness, and toxicity of five common over the counter (OTC) drugs and dietary supplements, and place these familiar medicines in a political and historical context. The objectives of this exercise were to stimulate interest in biochemistry; to provide basic information on enzymes and enzyme inhibitors related to these drugs to be expanded upon later in the course; and to encourage active and interactive learning. Teams of five students were formed, and each student was given an information sheet on aspirin, alpha-galactosidase, orlistat, dextromethorphan, or simvastatin, a low dose statin, which was previously available without prescription at pharmacies in the UK. After each member of the team acquired information on one OTC drug/dietary supplement by reading an assigned information sheet, the team was asked to go through a series of questions, and then submit answers to a quiz as a group. A high rate of success on the quiz, an overwhelmingly positive response on formal course evaluations, and enthusiastic exchanges during class suggested this team-based session accomplished its goals. Copyright © 2013 Wiley-Liss, Inc.

Fact Sheet on Evapotranspiration Cover Systems for Waste Containment

EPA Pesticide Factsheets

This Fact Sheet updates the 2003 Fact Sheet on Evapotranspiration Covers and provides information on the regulatory setting for ET covers, general considerations in their design, performance, and monitoring, and status at the time of writing (2011).

Publicly Owned Treatment Works (POTW): Final Air Toxics Rule Fact Sheets

EPA Pesticide Factsheets

This page contains an October 1999 fact sheet for the final NESHAP for POTW. This page also contains a December 2002 fact sheet with information regarding the new final amendments to the rule for the NESHAP.

Petroleum Refining Industry Final Air Toxics Rule Fact Sheets

EPA Pesticide Factsheets

This page contains a July 1995 fact sheet for the final NESHAP for Petroleum Refineries. This page also contains a June 2013 fact sheet with information regarding the final amendments to the 2013 final rule for the NESHAP.

Semiconductor Manufacturing Final Air Toxics Rules Fact Sheets

EPA Pesticide Factsheets

This page contains a February 2003 fact sheet for the final NESHAP for Semiconductor Manufacturing. This page also contains a July 2008 fact sheet with information regarding the final amendments to the 2003 final rule for the NESHAP.

The First Annual West Antarctic Ice Sheet (WAIS) Science Workshop

NASA Technical Reports Server (NTRS)

Bindschadler, Robert A. (Editor)

1993-01-01

A compilation of abstracts presented at the workshop are presented. The goal was to answer the question, what is the future behavior and potential for rapid collapse of the West Antarctic Ice Sheet (WAIS)? The workshop was organized into four sessions corresponding to the four objectives identified as necessary to reach the WAIS workshop goal: history, current behavior, internal dynamics, and environmental interactions. Presentations were organized by their relevance to each objective, rather than by discipline.

Recent progress in terrestrial photovoltaic collector technology

NASA Technical Reports Server (NTRS)

Ferber, R. R.

1982-01-01

The U.S. Photovoltaic Research and Development Program has the objective to develop the technology necessary to foster widespread grid-competitive electric power generation by the late 1980s. The flat-plate and the concentrator collector activities form the nucleus of the program. The project is concerned with the refining of silicon, silicon sheet production, solar cell processing and fabrication, encapsulation materials development, and collector design and production. The Large-Area Silicon Sheet Task has the objective to develop and demonstrate the feasibility of several methods for producing large area silicon sheet material suitable for fabricating low-cost, high-efficiency solar cells. It is expected that a variety of economic flat-plate and concentrator collectors will become commercially available for grid-connected applications.

Promoting social responsibility amongst health care users: medical tourists' perspectives on an information sheet regarding ethical concerns in medical tourism.

PubMed

Adams, Krystyna; Snyder, Jeremy; Crooks, Valorie A; Johnston, Rory

2013-12-06

Medical tourists, persons that travel across international borders with the intention to access non-emergency medical care, may not be adequately informed of safety and ethical concerns related to the practice of medical tourism. Researchers indicate that the sources of information frequently used by medical tourists during their decision-making process may be biased and/or lack comprehensive information regarding individual safety and treatment outcomes, as well as potential impacts of the medical tourism industry on third parties. This paper explores the feedback from former Canadian medical tourists regarding the use of an information sheet to address this knowledge gap and raise awareness of the safety and ethical concerns related to medical tourism. According to feedback provided in interviews with former Canadian medical tourists, the majority of participants responded positively to the information sheet and indicated that this document prompted them to engage in further consideration of these issues. Participants indicated some frustration after reading the information sheet regarding a lack of know-how in terms of learning more about the concerns discussed in the document and changing their decision-making. This frustration was due to participants' desperation for medical care, a topic which participants frequently discussed regarding ethical concerns related to health care provision. The overall perceptions of former medical tourists indicate that an information sheet may promote further consideration of ethical concerns of medical tourism. However, given that these interviews were performed with former medical tourists, it remains unknown whether such a document might impact upon the decision-making of prospective medical tourists. Furthermore, participants indicated a need for an additional tool such as a website for continued discussion about these concerns. As such, along with dissemination of the information sheet, future research implications should include the development of a website for ongoing discussion that could contribute to a raised awareness of these concerns and potentially increase social responsibility in the medical tourism industry.

Promoting social responsibility amongst health care users: medical tourists’ perspectives on an information sheet regarding ethical concerns in medical tourism

PubMed Central

2013-01-01

Background Medical tourists, persons that travel across international borders with the intention to access non-emergency medical care, may not be adequately informed of safety and ethical concerns related to the practice of medical tourism. Researchers indicate that the sources of information frequently used by medical tourists during their decision-making process may be biased and/or lack comprehensive information regarding individual safety and treatment outcomes, as well as potential impacts of the medical tourism industry on third parties. This paper explores the feedback from former Canadian medical tourists regarding the use of an information sheet to address this knowledge gap and raise awareness of the safety and ethical concerns related to medical tourism. Results According to feedback provided in interviews with former Canadian medical tourists, the majority of participants responded positively to the information sheet and indicated that this document prompted them to engage in further consideration of these issues. Participants indicated some frustration after reading the information sheet regarding a lack of know-how in terms of learning more about the concerns discussed in the document and changing their decision-making. This frustration was due to participants’ desperation for medical care, a topic which participants frequently discussed regarding ethical concerns related to health care provision. Conclusions The overall perceptions of former medical tourists indicate that an information sheet may promote further consideration of ethical concerns of medical tourism. However, given that these interviews were performed with former medical tourists, it remains unknown whether such a document might impact upon the decision-making of prospective medical tourists. Furthermore, participants indicated a need for an additional tool such as a website for continued discussion about these concerns. As such, along with dissemination of the information sheet, future research implications should include the development of a website for ongoing discussion that could contribute to a raised awareness of these concerns and potentially increase social responsibility in the medical tourism industry. PMID:24314027

Effects of flow sheet implementation on physician performance in the management of asthmatic patients.

PubMed

Ruoff, Gary

2002-01-01

This project focused on increasing compliance, in a large family practice group, with quality indicators for the management of asthma. The objective was to determine if use of a flow sheet incorporating the Global Initiative for Asthma (GINA) guidelines could improve compliance with those guidelines if the flow sheet was placed in patients' medical records. After review and selection of 14 clinical quality indicators, physicians in the practice implemented a flow sheet as an intervention. These flow sheets were inserted into the records of 122 randomly selected patients with asthma. Medical records were reviewed before the flow sheets were placed in the records, and again approximately 6 months later, to determine if there was a change in compliance with the quality indicators. Improvement of documentation was demonstrated in 13 of the 14 quality indicators. The results indicate that compliance with asthma management quality indicators can improve with the use of a flow sheet.

Hazardous Waste Clean-Up Information (CLU-IN) On-line Characterization and Remediation Databases Fact Sheet

EPA Pesticide Factsheets

This fact sheet provides an overview of the 10 on-line characterization and remediation databases available on the Hazardous Waste Clean-Up Information (CLU-IN) website sponsored by the U.S. Environmental Protection Agency.

Quick Information Sheets.

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. Trace Center.

This compilation of "Trace Quick Sheets" provides descriptions, prices, and ordering information for products and services that assist with communication, control, and computer access for disabled individuals. Product descriptions or product sources are included for: adaptive toys and toy modifications; head pointers, light pointers, and…

Final Rule to Reduce Toxic Air Emissions from Lime Manufacturing Plants Fact Sheet

EPA Pesticide Factsheets

This page contains an August 2003 fact sheet with information regarding the National Emissions Standards for Hazardous Air Pollutants (NESHAP) for Lime Manufacturing Plants. This document provides a summary of the information for this NESHAP.

Fact Sheets: Proposed and Final Air Toxics Standards for Hospital Sterilizers

EPA Pesticide Factsheets

This page contains an October 2006 and December 2007 fact sheet with information regarding the proposed and final National Emissions Standards for Hospital Ethylene Oxide Sterilizers. This document provides a summary of the information for this NESHAP.

Technology Systems. Laboratory Activities.

ERIC Educational Resources Information Center

Brame, Ray; And Others

This guide contains 43 modules of laboratory activities for technology education courses. Each module includes an instructor's resource sheet and the student laboratory activity. Instructor's resource sheets include some or all of the following elements: module number, course title, activity topic, estimated time, essential elements, objectives,…

Software Method for Computed Tomography Cylinder Data Unwrapping, Re-slicing, and Analysis

NASA Technical Reports Server (NTRS)

Roth, Don J.

2013-01-01

A software method has been developed that is applicable for analyzing cylindrical and partially cylindrical objects inspected using computed tomography (CT). This method involves unwrapping and re-slicing data so that the CT data from the cylindrical object can be viewed as a series of 2D sheets (or flattened onion skins ) in addition to a series of top view slices and 3D volume rendering. The advantages of viewing the data in this fashion are as follows: (1) the use of standard and specialized image processing and analysis methods is facilitated having 2D array data versus a volume rendering; (2) accurate lateral dimensional analysis of flaws is possible in the unwrapped sheets versus volume rendering; (3) flaws in the part jump out at the inspector with the proper contrast expansion settings in the unwrapped sheets; and (4) it is much easier for the inspector to locate flaws in the unwrapped sheets versus top view slices for very thin cylinders. The method is fully automated and requires no input from the user except proper voxel dimension from the CT experiment and wall thickness of the part. The software is available in 32-bit and 64-bit versions, and can be used with binary data (8- and 16-bit) and BMP type CT image sets. The software has memory (RAM) and hard-drive based modes. The advantage of the (64-bit) RAM-based mode is speed (and is very practical for users of 64-bit Windows operating systems and computers having 16 GB or more RAM). The advantage of the hard-drive based analysis is one can work with essentially unlimited-sized data sets. Separate windows are spawned for the unwrapped/re-sliced data view and any image processing interactive capability. Individual unwrapped images and un -wrapped image series can be saved in common image formats. More information is available at http://www.grc.nasa.gov/WWW/OptInstr/ NDE_CT_CylinderUnwrapper.html.

Fact Sheets: Air Toxics Rules for the Manufacture of Amino/Phenolic Resins

EPA Pesticide Factsheets

This page contains a December 1999 fact sheet for the proposed National Emission Standards for Hazardous Air Pollutants (NESHAP): Manufacture of Amino/Phenolic Resins and a September 2014 fact sheet with information regarding the final NESHAP

The Efficacy of a Silicone Sheet in Postoperative Scar Management.

PubMed

Kim, Jin Sam; Hong, Joon Pio; Choi, Jong Woo; Seo, Dong Kyo; Lee, Eun Sook; Lee, Ho Seong

2016-09-01

Silicone gel sheeting has been introduced to prevent scarring, but objective evidence for its usefulness in scar healing is limited. Therefore, the authors' objective was to examine the effectiveness of silicone gel sheeting by randomly applying it to only unilateral scars from a bilateral hallux valgus surgery with symmetrical closure. In a prospective randomized, blinded, intraindividual comparison study, the silicone gel sheeting was applied to 1 foot of a hallux valgus incision scar (an experiment group) for 12 weeks upon removal of the stitches, whereas the symmetrical scar from the other foot was left untreated (a control group). The scars were evaluated at 4 and 12 weeks after the silicon sheet application. The Vancouver Scar Scale was used to measure the vascularity, pigmentation, pliability, height, and length of the scars. Adverse effects were also evaluated, and they included pain, itchiness, rash, erythema, and skin softening. At weeks 4 and 12, the experiment group scored significantly better on the Vancouver Scar Scale in all items, except length (P < .05 for all except the length of scar), compared with the control group. In all items, adverse effects of the experiment group were significantly lower than those of the control group at week 12, suggesting that direct attachment of the silicone sheet does not cause adverse effects (P < .05). To the authors' knowledge, this is one of the first models to minimize bias related to scar evaluation by using symmetrical scars. The early silicone sheet application did show a significant improvement in prevention of postoperative scarring.

Off-Site Waste and Recovery Operations: National Emission Standards for Hazardous Air Pollutants (NESHAP) Fact Sheets

EPA Pesticide Factsheets

This page contains July 1996 and February 2015 fact sheets with information regarding the final National Emission Standards for Hazardous Air Pollutants (NESHAP) regulations. This document provides a summary of the information for these regulations.

Final Rule to Reduce Hazardous Air Emissions from Newly Built Stationary Combustion Turbines: Fact Sheet

EPA Pesticide Factsheets

This page contains an August 2003 fact sheet with information regarding the National Emissions Standards for Hazardous Air Pollutants (NESHAP) for Stationary Combustion Turbines. This document provides a summary of the information for this NESHAP.

Exploring Parenting: Information Sheets for Parents = Explorando El Arte de Ser Padres: Hojas informativas para los padres.

ERIC Educational Resources Information Center

Administration for Children, Youth, and Families (DHHS), Washington, DC. Head Start Bureau.

This document, provided here in separate English and Spanish versions, is a collection of informational and instructional sheets for parents of young children, divided into 20 thematic sections. Each of the sections includes information on the topic area, some learning activities, and questions for discussion. The sessions are: (1) "Getting…

Vacuum forming of thermoplastic sheet results in low-cost investment casting patterns

NASA Technical Reports Server (NTRS)

Clarke, A. E., Jr.

1964-01-01

Vacuum forming of a sheet of thermoplastic material around a mandrel conforming to the shape of the finished object provides a pattern for an investment mold. The thickness of the metal part is determined by the thickness of the plastic pattern.

International Energy Agency (IEA): Implementing Agreement for Co-operation in the Research and Development of Wind Turbine Systems (IEA Wind)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinclair, Karin C

This fact sheet covers the work that is being done via the International Energy Agency Task 34 (WREN). The fact sheet highlights the objective, strategy, primary activities, members, and contacts for this task.

Fact Sheets: Air Toxics Standards for Area Sources in Seven Industry Sectors

EPA Pesticide Factsheets

This page contains a June 2007 fact sheet and a March 2008 fact sheet for the National Emission Standards for Hazardous Air Pollutants (NESHAP): Wood Preserving Area Sources. These documents provide a summary of the information for this NESHAP.

A framework for assessing water and proppant use and flowback water extraction associated with development of continuous petroleum resources

USGS Publications Warehouse

Haines, Seth S.; Cook, Troy; Thamke, Joanna N.; Davis, Kyle W.; Long, Andrew J.; Healy, Richard W.; Hawkins, Sarah J.; Engle, Mark A.

2014-01-01

The U.S. Geological Survey is developing approaches for the quantitative assessment of water and proppant involved with possible future production of continuous petroleum deposits. The assessment approach is an extension of existing U.S. Geological Survey petroleum-assessment methods, and it aims to provide objective information that helps decision makers understand the tradeoffs inherent in resource-development decisions. This fact sheet provides an overview of U.S. Geological Survey assessments for quantities of water and proppant required for drilling and hydraulic fracturing and for flowback water extracted with petroleum; the report also presents the form of the intended assessment output information.

Strike Up the Score: Deriving Searchable and Playable Digital Formats from Sheet Music; Smart Objects and Open Archives; Building the Archives of the Future: Advanced in Preserving Electronic Records at the National Archives and Records Administration; From the Digitized to the Digital Library.

ERIC Educational Resources Information Center

Choudhury, G. Sayeed; DiLauro, Tim; Droettboom, Michael; Fujinaga, Ichiro; MacMillan, Karl; Nelson, Michael L.; Maly, Kurt; Thibodeau, Kenneth; Thaller, Manfred

2001-01-01

These articles describe the experiences of the Johns Hopkins University library in digitizing their collection of sheet music; motivation for buckets, Smart Object, Dumb Archive (SODA) and the Open Archives Initiative (OAI), and initial experiences using them in digital library (DL) testbeds; requirements for archival institutions, the National…

Sensitivity of simulated englacial isochrones to uncertain subglacial boundary conditions in central West Antarctica: Implications for detecting changes in ice dynamics

NASA Astrophysics Data System (ADS)

Muldoon, Gail; Jackson, Charles S.; Young, Duncan A.; Quartini, Enrica; Cavitte, Marie G. P.; Blankenship, Donald D.

2017-04-01

Information about the extent and dynamics of the West Antarctic Ice Sheet during past glaciations is preserved inside ice sheets themselves. Ice cores are capable of retrieving information about glacial history, but they are spatially sparse. Ice-penetrating radar, on the other hand, has been used to map large areas of the West Antarctic Ice Sheet and can be correlated to ice core chronologies. Englacial isochronous layers observed in ice-penetrating radar are the result of variations in ice composition, fabric, temperature and other factors. The shape of these isochronous surfaces is expected to encode information about past and present boundary conditions and ice dynamics. Dipping of englacial layers, for example, may reveal the presence of rapid ice flow through paleo ice streams or high geothermal heat flux. These layers therefore present a useful testbed for hypotheses about paleo ice sheet conditions. However, hypothesis testing requires careful consideration of the sensitivity of layer shape to the competing forces of ice sheet boundary conditions and ice dynamics over time. Controlled sensitivity tests are best completed using models, however ice sheet models generally do not have the capability of simulating layers in the presence of realistic boundary conditions. As such, modeling 3D englacial layers for comparison to observations is difficult and requires determination of a 3D ice velocity field. We present a method of post-processing simulated 3D ice sheet velocities into englacial isochronous layers using an advection scheme. We then test the sensitivity of layer geometry to uncertain boundary conditions, including heterogeneous subglacial geothermal flux and bedrock topography. By identifying areas of the ice sheet strongly influenced by boundary conditions, it may be possible to isolate the signature of paleo ice dynamics in the West Antarctic ice sheet.

Ancient Egypt

NASA Astrophysics Data System (ADS)

Swamy, Ashwin Balegar

This thesis involves development of an interactive GIS (Geographic Information System) based application, which gives information about the ancient history of Egypt. The astonishing architecture, the strange burial rituals and their civilization were some of the intriguing questions that motivated me towards developing this application. The application is a historical timeline starting from 3100 BC, leading up to 664 BC, focusing on the evolution of the Egyptian dynasties. The tool holds information regarding some of the famous monuments which were constructed during that era and also about the civilizations that co-existed. It also provides details about the religions followed by their kings. It also includes the languages spoken during those periods. The tool is developed using JAVA, a programing language and MOJO (Map Objects Java Objects) a product of ESRI (Environmental Science Research Institute) to create map objects, to provide geographic information. JAVA Swing is used for designing the user interface. HTML (Hyper Text Markup Language) pages are created to provide the user with more information related to the historic period. CSS (Cascade Style Sheets) and JAVA Scripts are used with HTML5 to achieve creative display of content. The tool is kept simple and easy for the user to interact with. The tool also includes pictures and videos for the user to get a feel of the historic period. The application is built to motivate people to know more about one of the prominent and ancient civilization of the Mediterranean world.

Silicon Sheet Quality is Improved By Meniscus Control

NASA Technical Reports Server (NTRS)

Yates, D. A.; Hatch, A. E.; Goldsmith, J. M.

1983-01-01

Better quality silicon crystals for solar cells are possible with instrument that monitors position of meniscus as sheet of solid silicon is drawn from melt. Using information on meniscus height, instrument generates feedback signal to control melt temperature. Automatic control ensures more uniform silicon sheets.

Fact Sheets: Final Rules to Reduce Toxic Air Pollutants from Surface Coating of Metal Cans

EPA Pesticide Factsheets

This page contains the August 2003 final rule fact sheet and the December 2005 final rule fact sheet that contain information on the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Surface Coating of Metal Cans.

Gasoline Distribution Facilities (Bulk Gasoline Terminals and Pipeline Breakout Stations) Air Toxics Rule Fact Sheets

EPA Pesticide Factsheets

This page contains a November 1994 fact sheet for the final NESHAP for Gasoline Distribution Facilities. This page also contains a December fact sheet with information regarding the final amendments to the 2003 final rule for the NESHAP.

Polycrystal-Plasticity Simulation of Roping in AA 6xxx Automotive Sheet Alloys

NASA Astrophysics Data System (ADS)

Engler, O.; Schäfer, C.; Brinkman, H.-J.

The occurrence of roping in AA 6xxx series sheet for car body applications is caused by the collective deformation of band-like clusters of grains with similar crystallographic orientation. In this study large-scale orientation maps obtained by electron back-scattered diffraction (EBSD) are input into a visco-plastic self-consistent polycrystal-plasticity model to analyze the strain anisotropy caused by the topographic arrangement of the recrystallization texture orientations and, in turn, the occurrence of roping. At variance to earlier studies, the measurements were carried out in the short transverse section of the sheets so as to get information on distribution and morphology of orientation clusters through the sheet thickness. Then, narrow bands in the EBSD maps aligned parallel to the ridges on the sheet surface are considered, and the variation in macroscopic strain response from band to band is determined. For a given deformation of the sample these simulations yield quantitative information on the level of roping of Al-alloy sheet for car body applications.

Global Nonlinear Optimization for the Interpretation of Magnetic Anomalies Over Idealized Geological Bodies for Ore Exploration - An Insight about Uncertainty

NASA Astrophysics Data System (ADS)

Biswas, A.

2016-12-01

A Very Fast Simulated Annealing (VFSA) global optimization code is produced for elucidation of magnetic data over various idealized bodies for mineral investigation. The way of uncertainty in the interpretation is additionally analyzed in the present study. This strategy fits the watched information exceptionally well by some straightforward geometrically body in the confined class of Sphere, horizontal cylinder, thin dyke and sheet type models. The consequences of VFSA improvement uncover that different parameters demonstrate various identical arrangements when state of the objective body is not known and shape factor "q" is additionally advanced together with other model parameters. The study uncovers that amplitude coefficient k is firmly subject to shape factor. This demonstrates there is multi-model sort vulnerability between these two model parameters. Be that as it may, the assessed estimations of shape factor from different VFSA runs without a doubt show whether the subsurface structure is sphere, horizontal cylinder, and dyke or sheet type structure. Thus, the precise shape element (2.5 for sphere, 2.0 for horizontal cylinder and 1.0 for dyke and sheet) is settled and improvement procedure is rehashed. Next, altering the shape factor and investigation of uncertainty as well as scatter-plots demonstrates a very much characterized uni-model characteristics. The mean model figured in the wake of settling the shape factor gives the highest dependable results. Inversion of noise-free and noisy synthetic data information and additionally field information shows the adequacy of the methodology. The procedure has been carefully and practically connected to five genuine field cases with the nearness of mineralized bodies covered at various profundities in the subsurface and complex geological settings. The method can be to a great degree appropriate for mineral investigation, where the attractive information is seen because of mineral body established in the shallow/deeper subsurface and the calculation time for the entire procedure are short. Keywords: Magnetic anomaly, idealized body, uncertainty, VFSA, multiple structure, ore exploration.

Cerebral Palsy: General Information. Fact Sheet Number 2 = La Paralisis Cerebral: Informacion General. Fact Sheet Number 18.

ERIC Educational Resources Information Center

Interstate Research Associates, McLean, VA.

This fact sheet on cerebral palsy is offered in both English and Spanish. First, it provides a definition and considers various causes (e.g., an insufficient amount of oxygen reaching the fetal or newborn brain). The fact sheet then offers incidence figures and explains characteristics of the three main types of cerebral palsy: spastic, athetoid,…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series C (Third Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for twenty-five lesson plans designed for a third-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series D (Fourth Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for twenty-seven lesson plans designed for a fourth-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each…

Fuels planning: science synthesis and integration; social issues fact sheet 02: Developing personal responsibility for fuels reduction: Types of information to encourage proactive behavior

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Fuels management responsibilities may include providing local property owners with the information for taking responsibility for reducing fuels on their land. This fact sheet discusses three different types of information that may be useful in programs to engage property owners in fuel reduction activities.

49 CFR 1180.9 - Financial information.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., TRACKAGE RIGHTS, AND LEASE PROCEDURES General Acquisition Procedures § 1180.9 Financial information. The...'s Uniform System of Accounts, 49 CFR part 1201: (a) Pro forma balance sheet (exhibit 16). Where the transaction involves a proceeding other than a control, a pro forma balance sheet statement giving effect to...

Koinonia: The Requirements and Vision for an Unclassified Information-Sharing System

DTIC Science & Technology

2013-06-01

of an effort to share information with multinational partners in Multinational Planning Augmentation Team (MPAT) ( Tempest Express Fact Sheet 2011... Tempest fact sheet. Global Security.org. May 7, 2011. Accessed May 3, 2013. http://www.globalsecurity.org/military/ops/ tempest -express.htm U.S

Final Petroleum Refinery Sector Risk and Technology Review and New Source Performance Standards (NSPS) Fact Sheets

EPA Pesticide Factsheets

This page contains 3 September 2015 fact sheets with information regarding the final residual risk and technology review for the petroleum refinery source categories. The fact sheets provide an overview, a summary of changes, effects for the community.

Whillans Ice Stream Subglacial Access Research Drilling (WISSARD): Integrative Study of Marine Ice Sheet Stability and Subglacial Life Habitats (Invited)

NASA Astrophysics Data System (ADS)

Tulaczyk, S. M.; Anandakrishnan, S.; Behar, A. E.; Christner, B. C.; Fisher, A. T.; Fricker, H. A.; Holland, D. M.; Jacobel, R. W.; Mikucki, J.; Mitchell, A. C.; Powell, R. D.; Priscu, J. C.; Scherer, R. P.; Severinghaus, J. P.

2009-12-01

The WISSARD project is a large, NSF-funded, interdisciplinary initiative focused on scientific drilling, exploration, and investigation of Antarctic subglacial aquatic environments. The project consists of three interrelated components: (1) LISSARD - Lake and Ice Stream Subglacial Access Research Drilling, (2) RAGES - Robotic Access to Grounding-zones for Exploration and Science, and (3) GBASE - GeomicroBiology of Antarctic Subglacial Environments). A number of previous studies in West Antarctica highlighted the importance of understanding ice sheet interactions with water, either at the basal boundary where ice streams come in contact with active subglacial hydrologic and geological systems or at the marine margin where the ice sheet is exposed to forcing from the global ocean and sedimentation. Recent biological investigations of Antarctic subglacial environments show that they provide a significant habitat for life and source of bacterial carbon in a setting that was previously thought to be inhospitable. Subglacial microbial ecosystems also enhance biogeochemical weathering, mobilizing elements from long term geological storage. The overarching scientific objective of WISSARD is to examine the subglacial hydrological system of West Antarctica in glaciological, geological, microbiological, geochemical, and oceanographic contexts. Direct sampling will yield seminal information on these systems and test the overarching hypothesis that active hydrological systems connect various subglacial environments and exert major control on ice sheet dynamics, subglacial sediment transfer, geochemistry, metabolic and phylogenetic diversity, and biogeochemical transformations and geological records of ice sheet history. Technological advances during WISSARD will provide the US-science community with a capability to access and study sub-ice sheet environments. Developing this technological infrastructure will benefit the broader science community and it will be available for future use. Furthermore, these projects will pioneer an approach implementing recommendations from the National Research Council committee on Principles of Environmental Stewardship for the Exploration and Study of Subglacial Environments.

14 CFR Section 14 - Objective Classification-Nonoperating Income and Expense

Code of Federal Regulations, 2010 CFR

2010-01-01

.... [ER-1401, 50 FR 245, Jan. 3, 1985] 81Interest on Long-term Debt and Capital Leases. (a) Record here... sheet classification purposes. 81.2Interest expense—capital leases. Record here for all capitalized... reasonably identifiable. (c) Amortization expense attributable to capital leases recorded in balance sheet...

Machine Shop Practice. Trade and Industrial Education Course of Study.

ERIC Educational Resources Information Center

Emerly, Robert J.; And Others

Designed for secondary school students who are interested in becoming machinists, this beginning course guide in machine shop practice is organized into the following sections: (1) Introduction, (2) instructional plan, (3) educational philosophy, (4) specific course objectives, (5) course outline, (6) job sheets, and (7) operation sheets. The…

14 CFR Section 14 - Objective Classification-Nonoperating Income and Expense

Code of Federal Regulations, 2011 CFR

2011-01-01

.... [ER-1401, 50 FR 245, Jan. 3, 1985] 81Interest on Long-term Debt and Capital Leases. (a) Record here... sheet classification purposes. 81.2Interest expense—capital leases. Record here for all capitalized... reasonably identifiable. (c) Amortization expense attributable to capital leases recorded in balance sheet...

Sewage Sludge Incinerators: Final Standards of Performance for New Stationary Sources and Emission Guidelines for Existing Sources Final Rule Fact Sheets

EPA Pesticide Factsheets

This page contains a February 2011 fact sheet with information regarding the final NSPS and Emission Guidelines for Existing Sources for Sewage Sludge Incinerators (SSI). This document provides a summary of the information for these regulations.

14 CFR 372.30 - Application.

Code of Federal Regulations, 2010 CFR

2010-01-01

... such person and shall contain the following information: (1) Date; (2) Name of applicant, trade names... additional information in support of application; (11) Balance sheet as of a date not more than 3 months prior to application and profit and loss statement for the full year ending as of date of balance sheet...

Videotex 1983. An ERIC Fact Sheet.

ERIC Educational Resources Information Center

Olson, Michael

The capabilities and potential of videotex, a two-way interactive communication and information retrieval service, are briefly described in this fact sheet. Videotex refers to a two-way linkage between databases and individual consumers in home or office. It is currently being used for information retrieval, transactions (e.g., bill paying,…

75 FR 75451 - Notice of Public Information Collection Requirements Submitted to OMB for Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-03

... Contractor Employee Biographical Data Sheet and Performance and Progress Reports (AIDAR 752.7026). These are... collection are best assured of having their full effect if received within 30 days of this notification.... Title: Contract Employee Biographical Data Sheet. Type of Submission: Renewal of Information Collections...

Bee Mite ID: Bee-associated mite genera of the world

USDA-ARS?s Scientific Manuscript database

Bee Mite ID contains an interactive key, fact sheets, an image gallery, and abundant supporting information. The interactive key allows you to choose characters to obtain a list of mite genera possibly matching your specimen. Consult fact sheets to find images and information for a particular mite g...

Energy Factsheets: 1, 3-24.

ERIC Educational Resources Information Center

League of Women Voters of the U.S., Washington, DC.

This is a series of fact sheets, each two pages long, presenting information, reading suggestions, and discussion questions on energy topics. The first fact sheet relates energy to the environmental problems. It provides a short background statement, remarks from notable experts, and a short list of reading material. The other fact sheets are on…

76 FR 30910 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Final Results of Countervailing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... Film, Sheet, and Strip From India: Final Results of Countervailing Duty New Shipper Review AGENCY... shipper review of polyethylene terephthalate film, sheet and strip (PET Film) from India for SRF Limited...-1398. SUPPLEMENTARY INFORMATION: Background Since the issuance of Polyethylene Terephthalate Film...

75 FR 475 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-05

... such member's financial condition as disclosed in its most recent balance sheet prepared either in... satisfying the requirement that members make balance sheet information available to bona fide regular... most recent balance sheet . * * *'' FINRA is proposing to provide members with the option of delivering...

75 FR 55579 - Proposed Agency Information Collection Activities; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-13

... balance sheet data on major categories of consumer and business credit receivables and on major short-term... items are collected to provide a full balance sheet. A supplemental section collects data on securitized... two columns to create a clearer distinction among broad balance sheet data items, which are collected...

DFACS - DATABASE, FORMS AND APPLICATIONS FOR CABLING AND SYSTEMS, VERSION 3.30

NASA Technical Reports Server (NTRS)

Billitti, J. W.

1994-01-01

DFACS is an interactive multi-user computer-aided engineering tool for system level electrical integration and cabling engineering. The purpose of the program is to provide the engineering community with a centralized database for entering and accessing system functional definitions, subsystem and instrument-end circuit pinout details, and harnessing data. The primary objective is to provide an instantaneous single point of information interchange, thus avoiding error-prone, time-consuming, and costly multiple-path data shuttling. The DFACS program, which is centered around a single database, has built-in menus that provide easy data input and access for all involved system, subsystem, and cabling personnel. The DFACS program allows parallel design of circuit data sheets and harness drawings. It also recombines raw information to automatically generate various project documents and drawings including the Circuit Data Sheet Index, the Electrical Interface Circuits List, Assembly and Equipment Lists, Electrical Ground Tree, Connector List, Cable Tree, Cabling Electrical Interface and Harness Drawings, Circuit Data Sheets, and ECR List of Affected Interfaces/Assemblies. Real time automatic production of harness drawings and circuit data sheets from the same data reservoir ensures instant system and cabling engineering design harmony. DFACS also contains automatic wire routing procedures and extensive error checking routines designed to minimize the possibility of engineering error. DFACS is designed to run on DEC VAX series computers under VMS using Version 6.3/01 of INGRES QUEL/OSL, a relational database system which is available through Relational Technology, Inc. The program is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard media) or a TK50 tape cartridge. DFACS was developed in 1987 and last updated in 1990. DFACS is a copyrighted work with all copyright vested in NASA. DEC, VAX and VMS are trademarks of Digital Equipment Corporation. INGRES QUEL/OSL is a trademark of Relational Technology, Inc.

Assessing the formability of metallic sheets by means of localized and diffuse necking models

NASA Astrophysics Data System (ADS)

Comşa, Dan-Sorin; Lǎzǎrescu, Lucian; Banabic, Dorel

2016-10-01

The main objective of the paper consists in elaborating a unified framework that allows the theoretical assessment of sheet metal formability. Hill's localized necking model and the Extended Maximum Force Criterion proposed by Mattiasson, Sigvant, and Larsson have been selected for this purpose. Both models are thoroughly described together with their solution procedures. A comparison of the theoretical predictions with experimental data referring to the formability of a DP600 steel sheet is also presented by the authors.

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series No. A (First Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for thirty-six lessons designed for a first-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each lesson.…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series No. B (Second Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for twenty-eight lesson plans designed for a second-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each…

E-tracers: A New Technique for Wireless Sensing Under Ice Sheets

NASA Astrophysics Data System (ADS)

Burrow, S.; Wadham, J. L.; Salter, M.; Barnes, R.

2009-12-01

A significant hurdle to the understanding of ice sheet basal hydrology and its coupling with ice motion is the difficulty in making in-situ measurements along a flow path. While dye tracing techniques may be used in small glaciers to determine transit times of surface melt water through the sub-glacial system, they provide no information on in situ conditions (e.g. pressure) and are ineffective at ice-sheet scale where dilution is high. The use of tethered sensor packages is complicated by the long lengths (~100’s m) and torturous path of the moulins and conduits within ice sheets. Recent attempts to pass solid objects (rubber ducks) and other sensor packages through glacial moulins have confirmed the difficultly in deploying sensors into the sub glacial environment. Here, we report the first successful deployment and recovery of compact, electronic units to moulins up to 7 km from the margin of a large land-terminating Greenland outlet. The technique uses RF (Radio Frequency) location to create an electronic tracer (an ‘e-tracer’) enabling a data-logging sensor package to be located in the pro-glacial flood plain once it has passed through the ice sheet. A number of individual packages are used in each deployment mitigating for the risk that some may become stuck within the moulin or lodge in an inaccessible part of the floodplain. In preliminary tests on the Leverett glacier in West Greenland during August 2009 we have demonstrated that this technique can be used to locate and retrieve dummy sensor packages: 50% and 20% of the dummy sensor packages introduced to moulins at 1 and 7 km from the ice sheet terminus respectively, emerged in the sub-glacial stream. It was possible to effectively detect the e-tracer units (which broadcast on 151MHz with 10mW of power) over a horizontal range of up to 5km across the pro-glacial floodplain and locate them to a high accuracy, allowing visual recognition and manual recovery. These performance statistics give this technique strong potential for investigating in-situ conditions along a flow path at ice sheet scale.

An object-oriented, coprocessor-accelerated model for ice sheet simulations

NASA Astrophysics Data System (ADS)

Seddik, H.; Greve, R.

2013-12-01

Recently, numerous models capable of modeling the thermo-dynamics of ice sheets have been developed within the ice sheet modeling community. Their capabilities have been characterized by a wide range of features with different numerical methods (finite difference or finite element), different implementations of the ice flow mechanics (shallow-ice, higher-order, full Stokes) and different treatments for the basal and coastal areas (basal hydrology, basal sliding, ice shelves). Shallow-ice models (SICOPOLIS, IcIES, PISM, etc) have been widely used for modeling whole ice sheets (Greenland and Antarctica) due to the relatively low computational cost of the shallow-ice approximation but higher order (ISSM, AIF) and full Stokes (Elmer/Ice) models have been recently used to model the Greenland ice sheet. The advance in processor speed and the decrease in cost for accessing large amount of memory and storage have undoubtedly been the driving force in the commoditization of models with higher capabilities, and the popularity of Elmer/Ice (http://elmerice.elmerfem.com) with an active user base is a notable representation of this trend. Elmer/Ice is a full Stokes model built on top of the multi-physics package Elmer (http://www.csc.fi/english/pages/elmer) which provides the full machinery for the complex finite element procedure and is fully parallel (mesh partitioning with OpenMPI communication). Elmer is mainly written in Fortran 90 and targets essentially traditional processors as the code base was not initially written to run on modern coprocessors (yet adding support for the recently introduced x86 based coprocessors is possible). Furthermore, a truly modular and object-oriented implementation is required for quick adaptation to fast evolving capabilities in hardware (Fortran 2003 provides an object-oriented programming model while not being clean and requiring a tricky refactoring of Elmer code). In this work, the object-oriented, coprocessor-accelerated finite element code Sainou is introduced. Sainou is an Elmer fork which is reimplemented in Objective C and used for experimenting with ice sheet models running on coprocessors, essentially GPU devices. GPUs are highly parallel processors that provide opportunities for fine-grained parallelization of the full Stokes problem using the standard OpenCL language (http://www.khronos.org/opencl/) to access the device. Sainou is built upon a collection of Objective C base classes that service a modular kernel (itself a base class) which provides the core methods to solve the finite element problem. An early implementation of Sainou will be presented with emphasis on the object architecture and the strategies of parallelizations. The computation of a simple heat conduction problem is used to test the implementation which also provides experimental support for running the global matrix assembly on GPU.

College Algebra I.

ERIC Educational Resources Information Center

Benjamin, Carl; And Others

Presented are student performance objectives, a student progress chart, and assignment sheets with objective and diagnostic measures for the stated performance objectives in College Algebra I. Topics covered include: sets; vocabulary; linear equations; inequalities; real numbers; operations; factoring; fractions; formulas; ratio, proportion, and…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meddens, Marjolein B. M.; Liu, Sheng; Finnegan, Patrick S.

Here, we have developed a method for performing light-sheet microscopy with a single high numerical aperture lens by integrating reflective side walls into a microfluidic chip. These 45° side walls generate light-sheet illumination by reflecting a vertical light-sheet into the focal plane of the objective. Light-sheet illumination of cells loaded in the channels increases image quality in diffraction limited imaging via reduction of out-of-focus background light. Single molecule super-resolution is also improved by the decreased background resulting in better localization precision and decreased photo-bleaching, leading to more accepted localizations overall and higher quality images. Moreover, 2D and 3D single moleculemore » super-resolution data can be acquired faster by taking advantage of the increased illumination intensities as compared to wide field, in the focused light-sheet.« less

Chemical vapor deposition growth

NASA Technical Reports Server (NTRS)

Ruth, R. P.; Manasevit, H. M.; Kenty, J. L.; Moudy, L. A.; Simpson, W. I.; Yang, J. J.

1976-01-01

The chemical vapor deposition (CVD) method for the growth of Si sheet on inexpensive substrate materials is investigated. The objective is to develop CVD techniques for producing large areas of Si sheet on inexpensive substrate materials, with sheet properties suitable for fabricating solar cells meeting the technical goals of the Low Cost Silicon Solar Array Project. Specific areas covered include: (1) modification and test of existing CVD reactor system; (2) identification and/or development of suitable inexpensive substrate materials; (3) experimental investigation of CVD process parameters using various candidate substrate materials; (4) preparation of Si sheet samples for various special studies, including solar cell fabrication; (5) evaluation of the properties of the Si sheet material produced by the CVD process; and (6) fabrication and evaluation of experimental solar cell structures, using standard and near-standard processing techniques.

Palaeo-sea-level and palaeo-ice-sheet databases: problems, strategies, and perspectives

NASA Astrophysics Data System (ADS)

Düsterhus, André; Rovere, Alessio; Carlson, Anders E.; Horton, Benjamin P.; Klemann, Volker; Tarasov, Lev; Barlow, Natasha L. M.; Bradwell, Tom; Clark, Jorie; Dutton, Andrea; Gehrels, W. Roland; Hibbert, Fiona D.; Hijma, Marc P.; Khan, Nicole; Kopp, Robert E.; Sivan, Dorit; Törnqvist, Torbjörn E.

2016-04-01

Sea-level and ice-sheet databases have driven numerous advances in understanding the Earth system. We describe the challenges and offer best strategies that can be adopted to build self-consistent and standardised databases of geological and geochemical information used to archive palaeo-sea-levels and palaeo-ice-sheets. There are three phases in the development of a database: (i) measurement, (ii) interpretation, and (iii) database creation. Measurement should include the objective description of the position and age of a sample, description of associated geological features, and quantification of uncertainties. Interpretation of the sample may have a subjective component, but it should always include uncertainties and alternative or contrasting interpretations, with any exclusion of existing interpretations requiring a full justification. During the creation of a database, an approach based on accessibility, transparency, trust, availability, continuity, completeness, and communication of content (ATTAC3) must be adopted. It is essential to consider the community that creates and benefits from a database. We conclude that funding agencies should not only consider the creation of original data in specific research-question-oriented projects, but also include the possibility of using part of the funding for IT-related and database creation tasks, which are essential to guarantee accessibility and maintenance of the collected data.

EnviroAtlas - Historic Places by 12-digit HUC for the Conterminous United States

EPA Pesticide Factsheets

This EnviroAtlas dataset portrays the total number of historic places located within each 12-digit Hydrologic Unit (HUC). The historic places data were compiled from the National Park Service's National Register of Historic Places (NRHP), which provides official federal lists of districts, sites, buildings, structures and objects significant to American history, architecture, archeology, engineering, and culture. This dataset was produced by the US EPA to support research and online mapping activities related to EnviroAtlas. EnviroAtlas (https://www.epa.gov/enviroatlas) allows the user to interact with a web-based, easy-to-use, mapping application to view and analyze multiple ecosystem services for the contiguous United States. The dataset is available as downloadable data (https://edg.epa.gov/data/Public/ORD/EnviroAtlas) or as an EnviroAtlas map service. Additional descriptive information about each attribute in this dataset can be found in its associated EnviroAtlas Fact Sheet (https://www.epa.gov/enviroatlas/enviroatlas-fact-sheets).

Magneto-hydrodynamics of coupled fluid-sheet interface with mass suction and blowing

NASA Astrophysics Data System (ADS)

Ahmad, R.

2016-01-01

There are large number of studies which prescribe the kinematics of the sheet and ignore the sheet's mechanics. However, the current boundary layer analysis investigates the mechanics of both the electrically conducting fluid and a permeable sheet, which makes it distinct from the other studies in the literature. One of the objectives of the current study is to (i) examine the behaviour of magnetic field effect for both the surface and the electrically conducting fluid (ii) investigate the heat and mass transfer between a permeable sheet and the surrounding electrically conducting fluid across the hydro, thermal and mass boundary layers. Self-similar solutions are obtained by considering the RK45 technique. Analytical solution is also found for the stretching sheet case. The skin friction dual solutions are presented for various types of sheet. The influence of pertinent parameters on the dimensionless velocity, shear stress, temperature, mass concentration, heat and mass transfer rates on the fluid-sheet interface is presented graphically as well as numerically. The obtained results are of potential benefit for studying the electrically conducting flow over various soft surfaces such as synthetic plastics, soft silicone sheet and soft synthetic rubber sheet. These surfaces are easily deformed by thermal fluctuations or thermal stresses.

Fact Sheets: Final Rule to Reduce Toxic Air Pollutants from Printing, Coating, and Dyeing of Fabrics and Other Textiles

EPA Pesticide Factsheets

This page contains the February 2003 and the October 2004 final rule fact sheet that contain information on the NESHAP for Printing, Coating, and Dyeing of Fabrics and Other Textiles. These documents provide a summary of the information for this NESHAP.

Young Voters in the 2006 Elections. Fact Sheet

ERIC Educational Resources Information Center

Kirby, Emily Hoban; Marcelo, Karlo Barrios

2006-01-01

On November 8th, CIRCLE released preliminary estimates showing that youth voter turnout rose to approximately 24% of eligible young voters between the ages of 18 and 29. This fact sheet presents information about young voters' political preferences, the issues that concerned them, and updated turnout estimates. Most of the information presented in…

Other Solid Waste Incineration (OSWI) Units Standards of Performance for New Stationary Sources and Emission Guidelines for Existing Sources Fact Sheets

EPA Pesticide Factsheets

This page contains a November 2005, and and November 2006 fact sheet with information regarding the final and proposed NSPS and Emission Guidelines for Existing Sources for OSWI. This document provides a summary of the information for this regulation

Expanding Adolescent Role Expectations. Information, Activities, Resources for Vocational Educators.

ERIC Educational Resources Information Center

Cornell Univ., Ithaca, NY. Dept. of Community Service Education.

Developed for vocational educators as a self-study guide or as a basis for inservice workshops, this source book presents information on sex fair education. Each of the six sections contains fact sheets and references, and some contain checklists, guidelines or rating sheets, and highlighted questions and activities which may be used for…

Energy. Overview: ERIC Fact Sheet No. 6.

ERIC Educational Resources Information Center

Arrington, Larry

This fact sheet provides a basic overview of energy problems and programs in the United States and discusses the role that vocational education can play in solving those problems. The National Energy Plan is described including its objectives, strategies, and seven legislative acts: (1) The National Energy Conservation Act; (2) The Power Plant and…

Multi-Objective Parallel Test-Sheet Composition Using Enhanced Particle Swarm Optimization

ERIC Educational Resources Information Center

Ho, Tsu-Feng; Yin, Peng-Yeng; Hwang, Gwo-Jen; Shyu, Shyong Jian; Yean, Ya-Nan

2009-01-01

For large-scale tests, such as certification tests or entrance examinations, the composed test sheets must meet multiple assessment criteria. Furthermore, to fairly compare the knowledge levels of the persons who receive tests at different times owing to the insufficiency of available examination halls or the occurrence of certain unexpected…

Major Appliance Repair. Teacher Edition and Student Edition. Second Edition.

ERIC Educational Resources Information Center

Smreker, Gene; Calvert, King

This second edition contains teacher and student guides for 14 units of instruction in major appliance repair. Each unit in the teacher edition includes some or all of the following basic components: objective sheet, suggested activities, answers to assignment sheets, answers to the written test, written test, a unit evaluation form, teacher…

Fact Sheets and Questions and Answers for the Final Air Toxics Rules for the Aerospace Manufacturing and Rework Industry

EPA Pesticide Factsheets

This page contains the July 1995 final rule fact sheet and the January 2015 proposed rule fact sheet that contains information on the National Emission Standards for Aerospace Manufacturing and Rework Facilities, as well as a 2001 Q&A document on the rule

Sheet Metal Contract. Project Report Phase I with Research Findings.

ERIC Educational Resources Information Center

Kirkpatrick, Thomas; Sappe', Hoyt

This report provides results of Phase I of a project that researched the occupational area of sheet metal, established appropriate committees, and conducted task verification. These results are intended to guide development of a program designed to train sheet metal workers. Section 1 contains general information: purpose of Phase I; description…

78 FR 67113 - Polyethylene Terephthalate Film, Sheet and Strip From India and Taiwan: Preliminary Results of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... Terephthalate Film, Sheet and Strip From India and Taiwan: Preliminary Results of the Second Sunset Review of... antidumping duty orders on Polyethylene Terephthalate Film, Sheet and Strip (``PET Film'') from India and...) 482-2371, respectively. SUPPLEMENTARY INFORMATION: Background The antidumping duty orders on PET Film...

A Guide to Immigration Facts and Issues.

ERIC Educational Resources Information Center

National Immigration Forum, Washington, DC.

This packet contains fact sheets and issue briefs on immigration and immigrants. Fact sheets, most of which are presented in 1994 and 1997 versions, contain brief summaries of information on immigration law and regulations, the status of immigrants, their countries of origin, and where they settle. These fact sheets make it clear that most…

75 FR 7447 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From Indonesia and the People's...: February 19, 2010. FOR FURTHER INFORMATION CONTACT: Gemal Brangman (Indonesia) or Demitrios Kalogeropoulos... using sheet-fed presses from Indonesia and the People's Republic of China. See Certain Coated Paper...

75 FR 70206 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From Indonesia: Countervailing Duty Order... Indonesia. DATES: Effective Date: November 17, 2010. FOR FURTHER INFORMATION CONTACT: Gene Calvert or... from Indonesia. See Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed...

Dylan Pritchett, Storyteller. Cue Sheet for Students.

ERIC Educational Resources Information Center

Evans, Karen L. B.

Designed to be used before and after attending a storytelling performance by Dylan Pritchett, this cue sheet presents information about the performance and suggests activities that can be done with classmates, friends, or family members. The cue sheet discusses where and why people tell stories, what makes a story good for telling, what makes a…

77 FR 64186 - Proposed Collection; Comment Request for Form 13614

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

... 13614, Interview and Intake Sheet. DATES: Written comments should be received on or before December 17... INFORMATION: Title: Interview and Intake Sheet. OMB Number: 1545-1964. Form Number: Form 13614-C and 13614-C... questions to guide volunteers in asking taxpayers basic questions about themselves. The intake sheet is an...

Programmable matter by folding

PubMed Central

Hawkes, E.; An, B.; Benbernou, N. M.; Tanaka, H.; Kim, S.; Demaine, E. D.; Rus, D.; Wood, R. J.

2010-01-01

Programmable matter is a material whose properties can be programmed to achieve specific shapes or stiffnesses upon command. This concept requires constituent elements to interact and rearrange intelligently in order to meet the goal. This paper considers achieving programmable sheets that can form themselves in different shapes autonomously by folding. Past approaches to creating transforming machines have been limited by the small feature sizes, the large number of components, and the associated complexity of communication among the units. We seek to mitigate these difficulties through the unique concept of self-folding origami with universal crease patterns. This approach exploits a single sheet composed of interconnected triangular sections. The sheet is able to fold into a set of predetermined shapes using embedded actuation. To implement this self-folding origami concept, we have developed a scalable end-to-end planning and fabrication process. Given a set of desired objects, the system computes an optimized design for a single sheet and multiple controllers to achieve each of the desired objects. The material, called programmable matter by folding, is an example of a system capable of achieving multiple shapes for multiple functions. PMID:20616049

Programmable matter by folding.

PubMed

Hawkes, E; An, B; Benbernou, N M; Tanaka, H; Kim, S; Demaine, E D; Rus, D; Wood, R J

2010-07-13

Programmable matter is a material whose properties can be programmed to achieve specific shapes or stiffnesses upon command. This concept requires constituent elements to interact and rearrange intelligently in order to meet the goal. This paper considers achieving programmable sheets that can form themselves in different shapes autonomously by folding. Past approaches to creating transforming machines have been limited by the small feature sizes, the large number of components, and the associated complexity of communication among the units. We seek to mitigate these difficulties through the unique concept of self-folding origami with universal crease patterns. This approach exploits a single sheet composed of interconnected triangular sections. The sheet is able to fold into a set of predetermined shapes using embedded actuation. To implement this self-folding origami concept, we have developed a scalable end-to-end planning and fabrication process. Given a set of desired objects, the system computes an optimized design for a single sheet and multiple controllers to achieve each of the desired objects. The material, called programmable matter by folding, is an example of a system capable of achieving multiple shapes for multiple functions.

Improving discharge planning communication between hospitals and patients.

PubMed

New, P W; McDougall, K E; Scroggie, C P R

2016-01-01

A potential barrier to patient discharge from hospital is communication problems between the treating team and the patient or family regarding discharge planning. To determine if a bedside 'Leaving Hospital Information Sheet' increases patient and family's knowledge of discharge date and destination and the name of the key clinician primarily responsible for team-patient communication. This article is a 'before-after' study of patients, their families and the interdisciplinary ward-based clinical team. Outcomes assessed pre-implementation and post-implementation of a bedside 'Leaving Hospital Information Sheet' containing discharge information for patients and families. Patients and families were asked if they knew the key clinician for team-patient communication and the proposed discharge date and discharge destination. Responses were compared with those set by the team. Staff were surveyed regarding their perceptions of patient awareness of discharge plans and the benefit of the 'Leaving Hospital Information Sheet'. Significant improvement occurred regarding patients' knowledge of their key clinician for team-patient communication (31% vs 75%; P = 0.0001), correctly identifying who they were (47% vs 79%; P = 0.02), and correctly reporting their anticipated discharge date (54% vs 86%; P = 0.004). There was significant improvement in the family's knowledge of the anticipated discharge date (78% vs 96%; P = 0.04). Staff reported the 'Leaving Hospital Information Sheet' assisted with communication regarding anticipated discharge date and destination (very helpful n = 11, 39%; a little bit helpful n = 11, 39%). A bedside 'Leaving Hospital Information Sheet' can potentially improve communication between patients, families and their treating team. © 2016 Royal Australasian College of Physicians.

Electrical Subsystems Flight Test Handbook

DTIC Science & Technology

1984-01-01

distribution of this handbook to the public at large, or by DDC to the National Technical Information Service (NTIS). At NTIS, it will be available to...Abnormal Mode 58 Emergency Mode 61 Instrumentation 62 Test Information Sheets 62 Integration with Flight Test Program 62 DATA MEASUREMENT, ANALYS IS...AND EVALUATION 65 REFERENCES 73 -APPENDIX A - EXAMPLE OF TEST INFORMATION SHEET 75 APPENDIX B - EXAMPLE OF TEST PLAN SAFETY REVIEW 85 APPENDIX C

General Information about Crisis Nursery Care, ARCH Factsheet Number 1 [and] General Information about Respite Care, ARCH Factsheet Number 2.

ERIC Educational Resources Information Center

North Carolina State Dept. of Human Resources, Raleigh. Div. of Mental Health, Mental Retardation and Substance Abuse Services.

This document consists of a combination of two separately published fact sheets, one on crisis nursery care for children at risk of abuse or neglect and one on respite care for families of children with disabilities or chronic illness. The fact sheet on crisis nursery care presents background information on the federal role in developing crisis…

Geometry of thin liquid sheet flows

NASA Technical Reports Server (NTRS)

Chubb, Donald L.; Calfo, Frederick D.; Mcconley, Marc W.; Mcmaster, Matthew S.; Afjeh, Abdollah A.

1994-01-01

Incompresible, thin sheet flows have been of research interest for many years. Those studies were mainly concerned with the stability of the flow in a surrounding gas. Squire was the first to carry out a linear, invicid stability analysis of sheet flow in air and compare the results with experiment. Dombrowski and Fraser did an experimental study of the disintegration of sheet flows using several viscous liquids. They also detected the formulation of holes in their sheet flows. Hagerty and Shea carried out an inviscid stability analysis and calculated growth rates with experimental values. They compared their calculated growth rates with experimental values. Taylor studied extensively the stability of thin liquid sheets both theoretically and experimentally. He showed that thin sheets in a vacuum are stable. Brown experimentally investigated thin liquid sheet flows as a method of application of thin films. Clark and Dumbrowski carried out second-order stability analysis for invicid sheet flows. Lin introduced viscosity into the linear stability analysis of thin sheet flows in a vacuum. Mansour and Chigier conducted an experimental study of the breakup of a sheet flow surrounded by high-speed air. Lin et al. did a linear stability analysis that included viscosity and a surrounding gas. Rangel and Sirignano carried out both a linear and nonlinear invisid stability analysis that applies for any density ratio between the sheet liquid and the surrounding gas. Now there is renewed interest in sheet flows because of their possible application as low mass radiating surfaces. The objective of this study is to investigate the fluid dynamics of sheet flows that are of interest for a space radiator system. Analytical expressions that govern the sheet geometry are compared with experimental results. Since a space radiator will operate in a vacuum, the analysis does not include any drag force on the sheet flow.

Chikungunya Virus

MedlinePlus

... Information For Health Care Providers Fact Sheets and Posters Chikungunya Nowcast for the Americas Get Email Updates ... Providers Nowcast for the Americas Fact Sheets and Posters Resources Vector Surveillance and Control File Formats Help: ...

Quality Control: (Material) Safety Data Sheets.

PubMed

Allen, Loyd V

2017-01-01

Safety Data Sheets (formerly Material Safety Data Sheets) are a system for cataloging information on chemicals, chemical compounds, and chemical mixtures and include instructions for the safe use and potential hazards associated with a particular material or product. At present, there are 16 sections of Safety Data Sheets, and these sections are discussed in this article. Two United States Pharmacopeia compounding-related chapters (<795> and <800>) refer to Safety Data Sheets, and this article provides a brief discussion on the terminology contained within those chapters. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Biomedical equipment in the neonatal intensive care unit: is it a stressor?

PubMed

Gibbons, C; Geller, S; Glatz, E

1998-12-01

The objective of this research was to learn more about nurses' perceptions of the sources of stress in a neonatal intensive care unit and based on the results, to initiate programs to combat stressors. Nurses were asked to complete a demographic sheet and stress audit. Thirty-three (52%) nurses responded and reported that their greatest source of stress was centered on bio-medical equipment--specifically on access, storage, design, and function issues. Nurses reported their least sources were advanced positions, stable infants, and routine procedures. Plans are underway to remedy equipment issues--primarily to inform and collaborate with others.

75 FR 40776 - Polyethylene Terephthalate Film, Sheet and Strip From the United Arab Emirates: Extension of Time...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-14

... Film, Sheet and Strip From the United Arab Emirates: Extension of Time Limit for Preliminary Results of... polyethylene terephthalate film, sheet and strip from the United Arab Emirates (UAE) for the period November 06... analysis of all information on the record, specifically considering the cost and affiliation issues in this...

77 FR 70860 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-27

... Change To Adopt a Supplementary Schedule for Derivatives and Other Off-Balance Sheet Items Pursuant to...-balance sheet items pursuant to FINRA Rule 4524 (Supplemental FOCUS Information). The text of the proposed... otherwise reported on certain firms' balance sheets. To that end, the proposal would require all carrying or...

Stress-wave grading techniques on veneer sheets

Treesearch

Joseph Jung

1979-01-01

A study was conducted to compare stress wave devices and determine the information available from stress waves in veneer sheets. The distortion of the stress wave as it passed a defect indicated that an estimate of the location and size of the defect can be obtained but information regarding wood quality is lost in the areas immediately behind a knot.

Motor Transportation Technology: Automechanics. [Air Conditioning.] Block IX. A-IX.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

This packet contains 13 teacher lesson plans with related student information, job sheets, and task sheets for a block of instruction on motor vehicle refrigeration (air conditioning) systems in a course on auto mechanics. Lesson plans, which are either informational or manipulative in format, take the teacher step-by-step through each lesson.…

Know Your School District: Tips for Parents. PACER Center ACTion Information Sheets. PHP-c112

ERIC Educational Resources Information Center

PACER Center, 2006

2006-01-01

Becoming familiar with the school district will help parents become active and involved partners in their child's education. Research has demonstrated that family involvement in children's education can boost their academic success. Knowing about the following areas, which are discussed in this information sheet, can help parental involvement at…

Deformation Analysis of RC Ties Externally Strengthened with FRP Sheets

NASA Astrophysics Data System (ADS)

Gribniak, V.; Arnautov, A. K.; Kaklauskas, G.; Jakstaite, R.; Tamulenas, V.; Gudonis, E.

2014-11-01

The current study has two objectives: to validate the ability of the Atena finite-element software to estimate the deformations of reinforced concrete (RC) elements strengthened with fiber-reinforced polymer (FRP) sheets and to assess the effect of FRP-to-concrete bond strength on the results of numerical simulation. It is shown that the bond strength has to be selected according to the overall stiffness of the composite element. The numerical results found are corroborated experimentally by tensile tests of RC elements strengthened with basalt FRP sheets.

75 FR 2929 - Proposed Collection; Comment Request for Form 13614-NR

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-19

... comments concerning Form 13614-NR, Nonresident Alien Intake and Interview Sheet. DATES: Written [email protected] . SUPPLEMENTARY INFORMATION: Title: Nonresident Alien Intake and Interview Sheet. OMB...

Data Processing: Status of Agriculture's Electronic Dissemination of Information System. Fact Sheet for the Chairman, Subcommittee on Government Information, Justice, and Agriculture, Committee on Government Operations, House of Representatives.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

Written in response to a request to review the implementation of the Department of Agriculture's Electronic Dissemination of Information (EDI) system, this fact sheet discusses the performance of the contractor operating the system and the role of EDI in the Department of Agriculture's overall public dissemination activities. A letter from the…

Moral Dilemmas/Value Sheets: Writing for Content-Centered Social Studies Classrooms.

ERIC Educational Resources Information Center

Stahl, Robert J.; And Others

The purpose of the paper is to stress the development of content-centered classroom activities useful for attaining values clarification and/or moral development goals. The objective is to help teachers understand the formulation of content-centered learning activities so that they will be able to plan and produce their own value sheets or moral…

High-speed volume measurement system and method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lane, Michael H.; Doyle, Jr., James L.; Brinkman, Michael J.

2017-12-12

Disclosed is a volume sensor having first, second, and third laser sources emitting first, second, and third laser beams; first, second, and third beam splitters splitting the first, second, and third laser beams into first, second, and third beam pairs; first, second, and third optical assemblies expanding the first, second, and third beam pairs into first, second, and third pairs of parallel beam sheets; fourth, fifth, and sixth optical assemblies focusing the first, second, and third beam sheet pairs into fourth, fifth, and sixth beam pairs; and first, second, and third detector pairs receiving the fourth, fifth, and sixth beammore » pairs and converting a change in intensity of at least one of the beam pairs resulting from an object passing through at least one of the first, second, and third parallel beam sheets into at least one electrical signal proportional to a three-dimensional representation of the object.« less

Analysis of a Sheet Silicate.

ERIC Educational Resources Information Center

Adams, J. M.; Evans, S.

1980-01-01

Describes a student project in analytical chemistry using sheet silicates. Provides specific information regarding the use of phlogopite in an experiment to analyze samples for silicon, aluminum, magnesium, iron, potassium, and fluoride. (CS)

EoE (Eosinophilic Esophagitis)

MedlinePlus

... Sheet Q & A with Experts Patient Stories Social Security Disability Application Process For Kids For Teens Managing ... Q & A with Experts Health Information Sheet Social Security Disability Application Process For Family and Friends For ...

Program for Arctic Regional Climate Assessment (PARCA)

NASA Technical Reports Server (NTRS)

Gogineni, Sivaprasad; Thomas, Robert H.; Abdalati, Waleed (Editor)

1999-01-01

The Program for Arctic Regional Climate Assessment (PARCA) is a NASA-sponsored initiative with the prime objective of understanding the mass balance of the Greenland ice sheet. In October 1998, PARCA investigators met to review activities of the previous year, assess the program's progress, and plan future investigations directed at accomplishing that objective. Some exciting results were presented and discussed, including evidence of dramatic thinning of the ice sheet near the southeastern coast. Details of the investigations and many of the accomplishments are given in this report, but major highlights are given in the Executive Summary of the report.

Skiving stacked sheets of paper into test paper for rapid and multiplexed assay

PubMed Central

Yang, Mingzhu; Zhang, Wei; Yang, Junchuan; Hu, Binfeng; Cao, Fengjing; Zheng, Wenshu; Chen, Yiping; Jiang, Xingyu

2017-01-01

This paper shows that stacked sheets of paper preincubated with different biological reagents and skiving them into uniform test paper sheets allow mass manufacturing of multiplexed immunoassay devices and simultaneous detection of multiplex targets that can be read out by a barcode scanner. The thickness of one sheet of paper can form the width of a module for the barcode; when stacked, these sheets of paper can form a series of barcodes representing the targets, depending on the color contrast provided by a colored precipitate of an immunoassay. The uniform thickness of sheets of paper allows high-quality signal readout. The manufacturing method allows highly efficient fabrication of the materials and substrates for a straightforward assay of targets that range from drugs of abuse to biomarkers of blood-transmitted infections. In addition, as a novel alternative to the conventional point-of-care testing method, the paper-based barcode assay system can provide highly efficient, accurate, and objective diagnoses. PMID:29214218

Responding to GPs' information resource needs: implementation and evaluation of a complementary medicines information resource in Queensland general practice

PubMed Central

2011-01-01

Background Australian General Practitioners (GPs) are in the forefront of primary health care and in an excellent position to communicate with their patients and educate them about Complementary Medicines (CMs) use. However previous studies have demonstrated that GPs lack the knowledge required about CMs to effectively communicate with patients about their CMs use and they perceive a need for information resources on CMs to use in their clinical practice. This study aimed to develop, implement, and evaluate a CMs information resource in Queensland (Qld) general practice. Methods The results of the needs assessment survey of Qld general practitioners (GPs) informed the development of a CMs information resource which was then put through an implementation and evaluation cycle in Qld general practice. The CMs information resource was a set of evidence-based herbal medicine fact sheets. This resource was utilised by 100 Qld GPs in their clinical practice for four weeks and was then evaluated. The evaluation assessed GPs' (1) utilisation of the resource (2) perceived quality, usefulness and satisfaction with the resource and (3) perceived impact of the resource on their knowledge, attitudes, and practice of CMs. Results Ninety two out of the 100 GPs completed the four week evaluation of the fact sheets and returned the post-intervention survey. The herbal medicine fact sheets produced by this study were well accepted and utilised by Qld GPs. The majority of GPs perceived that the fact sheets were a useful resource for their clinical practice. The fact sheets improved GPs' attitudes towards CMs, increased their knowledge of those herbal medicines and improved their communication with their patients about those specific herbs. Eighty-six percent of GPs agreed that if they had adequate resources on CMs, like the herbal medicine fact sheets, then they would communicate more to their patients about their use of CMs. Conclusion Further educational interventions on CMs need to be provided to GPs to increase their knowledge of CMs and to improve their communication with patients about their CMs use. PMID:21933434

TSCA Chemical Data Reporting Fact Sheet: Toll Manufacturing

EPA Pesticide Factsheets

This fact sheet provides information on existing Chemical Data Reporting (CDR) regulations to persons who are involved in toll manufacturing of chemical substances which may be subject to the CDR rule.

Energy-Saving Opportunities for Manufacturing Companies, International Fact Sheet (Spanish)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This English/Spanish fact sheet describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

Spina Bifida: General Information. Fact Sheet Number 12 = La Espina Bifida: Informacion General. Fact Sheet Number 21.

ERIC Educational Resources Information Center

Interstate Research Associates, McLean, VA.

This fact sheet on spina bifida is offered in both English and Spanish. It provides definitions of the three types of spina bifida (spina bifida occulta, meningocele, and myelomeningocele). Incidence figures are given as are typical characteristics of children with spina bifida. Educational implications are briefly noted, including the need to…

Down Syndrome: General Information. Fact Sheet Number 4 = El Sindrome de Down: Informacion General. Fact Sheet Number 15.

ERIC Educational Resources Information Center

Interstate Research Associates, McLean, VA.

This fact sheet on Down Syndrome is offered in both English and Spanish. First it provides a definition and description of this syndrome, noting its etiology in a chromosomal abnormality. Incidence figures are then given. Typical characteristics of people with Down Syndrome are listed. Commonly associated health-related problems are noted,…

Facts for Families from the American Academy of Child and Adolescent Psychiatry [1989].

ERIC Educational Resources Information Center

American Academy of Child and Adolescent Psychiatry, Washington, DC.

Six fact sheets on issues relevant to children's emotional well being are presented in this document. The first fact sheet, "Children and Divorce" provides information for parents to consider when getting a divorce. Parents are encouraged to be aware of the stress that the events surrounding a divorce cause for the child. The second fact sheet,…

Construction Upgrade. A Pack To Improve Communication, Numerical and IT Skills for NVQ.

ERIC Educational Resources Information Center

Rylands, Judy

This pack of materials is designed to help students working to improve their basic skills as part of their carpentry and joinery course. An introduction lists relevant core skills units and basic skills standards. The six individual sections of the pack are divided into task sheets and fact sheets. The fact sheets give information and teaching…

Scanning light-sheet microscopy in the whole mouse brain with HiLo background rejection.

PubMed

Mertz, Jerome; Kim, Jinhyun

2010-01-01

It is well known that light-sheet illumination can enable optically sectioned wide-field imaging of macroscopic samples. However, the optical sectioning capacity of a light-sheet macroscope is undermined by sample-induced scattering or aberrations that broaden the thickness of the sheet illumination. We present a technique to enhance the optical sectioning capacity of a scanning light-sheet microscope by out-of-focus background rejection. The technique, called HiLo microscopy, makes use of two images sequentially acquired with uniform and structured sheet illumination. An optically sectioned image is then synthesized by fusing high and low spatial frequency information from both images. The benefits of combining light-sheet macroscopy and HiLo background rejection are demonstrated in optically cleared whole mouse brain samples, using both green fluorescent protein (GFP)-fluorescence and dark-field scattered light contrast.

Scanning light-sheet microscopy in the whole mouse brain with HiLo background rejection

NASA Astrophysics Data System (ADS)

Mertz, Jerome; Kim, Jinhyun

2010-01-01

It is well known that light-sheet illumination can enable optically sectioned wide-field imaging of macroscopic samples. However, the optical sectioning capacity of a light-sheet macroscope is undermined by sample-induced scattering or aberrations that broaden the thickness of the sheet illumination. We present a technique to enhance the optical sectioning capacity of a scanning light-sheet microscope by out-of-focus background rejection. The technique, called HiLo microscopy, makes use of two images sequentially acquired with uniform and structured sheet illumination. An optically sectioned image is then synthesized by fusing high and low spatial frequency information from both images. The benefits of combining light-sheet macroscopy and HiLo background rejection are demonstrated in optically cleared whole mouse brain samples, using both green fluorescent protein (GFP)-fluorescence and dark-field scattered light contrast.

Nutrition: Eating for Better Health. Student Workbook. Health Promotion for Adult Literacy Students: An Empowering Approach.

ERIC Educational Resources Information Center

Hudson River Center for Program Development, Glenmont, NY.

This workbook was developed to help adult literacy students learn about nutrition. It contains information sheets, student worksheets, and answers to the worksheets. The information sheets are coordinated with an available audiotape. Some of the topics covered in the workbook are the following: choosing good foods without spending a lot of money;…

First Aid: Helping Yourself, Helping Others. Student Workbook. Health Promotion for Adult Literacy Students: An Empowering Approach.

ERIC Educational Resources Information Center

Hudson River Center for Program Development, Glenmont, NY.

This workbook was developed to help adult literacy students learn about first aid in order to help themselves and others. It contains information sheets, student worksheets, and answers to the worksheets. The information sheets are coordinated with an available audiotape. Some of the topics covered in the workbook are the following: handling an…

Device Independent Layout and Style Editing Using Multi-Level Style Sheets

NASA Astrophysics Data System (ADS)

Dees, Walter

This paper describes a layout and styling framework that is based on the multi-level style sheets approach. It shows some of the techniques that can be used to add layout and style information to a UI in a device-independent manner, and how to reuse the layout and style information to create user interfaces for different devices

Toward cellulose nanomaterial commercialization: knowledge gap analysis for safety data sheets according to the globally harmonized system

Treesearch

Jo Anne Shatkin; Kimberly J. Ong; James D. Ede; Theodore H. Wegner; Michael Goergen

2016-01-01

Commercialization of cellulose nanomaterials (CNs) is rapidly advancing, to the benefit of many end-use product sectors, and providing information about the safe manufacturing and handling for CNs is a priority. Safety Data Sheets (SDS) are required for industrially produced materials to communicate information on their potential health, fire, reactivity, and...

Augmentative Device Helps Max Speak. PACER Center ACTion Information Sheets. PHP-c75

ERIC Educational Resources Information Center

PACER Center, 2014

2014-01-01

This Action Information Sheet follows a family's process of selecting and using augmentative and alternative communication to help their young son, Max, speak. Max is affected by global dyspraxia, which makes learning new motor skills--especially speech--quite difficult. For the first years of his life, Max could not say words. Before he and his…

Metformin and Pregnancy

MedlinePlus

... fed. Be sure to talk to your health care provider about all your breastfeeding questions. For information on a related topic see the MotherToBaby fact sheet for Diabetes and Pregnancy at https: / / mothertobaby. org/ fact- sheets/ ...

Citizen Science Opportunities for Monitoring Air Quality Fact Sheet

EPA Pesticide Factsheets

The Citizen Science Opportunities for Monitoring Air Quality fact sheet provides information on what citizen science is and the tools and resources available for citizen scientists interested in monitoring air quality.

Nanotechnology for Site Remediation: Fact Sheet

EPA Pesticide Factsheets

This fact sheet presents a snapshot of nanotechnology and its current uses in remediation. It presents information to help site project managers understand the potential applications of this group of technologies at their sites.

Fact Sheets about the Fourth Unregulated Contaminant Monitoring Rule (UCMR 4)

EPA Pesticide Factsheets

Fact Sheets explaining the program, contaminants for monitoring, water systems applicable, timeframe & monitoring frequency, monitoring locations, critical requirements, data elements and where to find additional information on monitoring data.

Chemical vapor deposition growth

NASA Technical Reports Server (NTRS)

Ruth, R. P.; Manasevit, H. M.; Campbell, A. G.; Johnson, R. E.; Kenty, J. L.; Moudy, L. A.; Shaw, G. L.; Simpson, W. I.; Yang, J. J.

1978-01-01

The objective was to investigate and develop chemical vapor deposition (CVD) techniques for the growth of large areas of Si sheet on inexpensive substrate materials, with resulting sheet properties suitable for fabricating solar cells that would meet the technical goals of the Low Cost Silicon Solar Array Project. The program involved six main technical tasks: (1) modification and test of an existing vertical-chamber CVD reactor system; (2) identification and/or development of suitable inexpensive substrate materials; (3) experimental investigation of CVD process parameters using various candidate substrate materials; (4) preparation of Si sheet samples for various special studies, including solar cell fabrication; (5) evaluation of the properties of the Si sheet material produced by the CVD process; and (6) fabrication and evaluation of experimental solar cell structures, using impurity diffusion and other standard and near-standard processing techniques supplemented late in the program by the in situ CVD growth of n(+)/p/p(+) sheet structures subsequently processed into experimental cells.

California State Waters Map Series-Offshore of Point Reyes, California

USGS Publications Warehouse

Watt, Janet T.; Dartnell, Peter; Golden, Nadine E.; Greene, H. Gary; Erdey, Mercedes D.; Cochrane, Guy R.; Johnson, Samuel Y.; Hartwell, Stephen R.; Kvitek, Rikk G.; Manson, Michael W.; Endris, Charles A.; Dieter, Bryan E.; Sliter, Ray W.; Krigsman, Lisa M.; Lowe, Erik; Chinn, John L.; Watt, Janet T.; Cochran, Susan A.

2015-01-01

This publication about the Offshore of Point Reyes map area includes ten map sheets that contain explanatory text, in addition to this descriptive pamphlet and a data catalog of geographic information system (GIS) files. Sheets 1, 2, and 3 combine data from four different sonar surveys to generate comprehensive high-resolution bathymetry and acoustic-backscatter coverage of the map area. These data reveal a range of physiographic features (highlighted in the perspective views on sheet 4) such as the flat, sediment-covered seafloor in Drakes Bay, as well as abundant “scour depressions” on the Bodega Head–Tomales Point shelf (see sheet 9) and local, tectonically controlled bedrock uplifts. To validate geological and biological interpretations of the sonar data shown in sheets 1, 2, and 3, the U.S. Geological Survey towed a camera sled over specific offshore locations, collecting both video and photographic imagery; these “ground-truth” surveying data are summarized on sheet 6. Sheet 5 is a “seafloor character” map, which classifies the seafloor on the basis of depth, slope, rugosity (ruggedness), and backscatter intensity and which is further informed by the ground-truth-survey imagery. Sheet 7 is a map of “potential habitats,” which are delineated on the basis of substrate type, geomorphology, seafloor process, or other attributes that may provide a habitat for a specific species or assemblage of organisms. Sheet 8 compiles representative seismic-reflection profiles from the map area, providing information on the subsurface stratigraphy and structure of the map area. Sheet 9 shows the distribution and thickness of young sediment (deposited over the last about 21,000 years, during the most recent sea-level rise) in both the map area and the larger Salt Point to Drakes Bay region, interpreted on the basis of the seismic-reflection data, and it identifies the Offshore of Point Reyes map area as lying within the Bodega Head–Tomales Point shelf, Point Reyes bar, and Bolinas shelf domains. Sheet 10 is a geologic map that merges onshore geologic mapping (compiled from existing maps by the California Geological Survey) and new offshore geologic mapping that is based on integration of high-resolution bathymetry and backscatter imagery (sheets 1, 2, 3), seafloor-sediment and rock samples (Reid and others, 2006), digital camera and video imagery (sheet 6), and high-resolution seismic-reflection profiles (sheet 8), as well as aerial-photographic interpretation of nearshore areas. The information provided by the map sheets, pamphlet, and data catalog have a broad range of applications. High-resolution bathymetry, acoustic backscatter, ground-truth-surveying imagery, and habitat mapping all contribute to habitat characterization and ecosystem-based management by providing essential data for delineation of marine protected areas and ecosystem restoration. Many of the maps provide high-resolution baselines that will be critical for monitoring environmental change associated with climate change, coastal development, or other forcings. High-resolution bathymetry is a critical component for modeling coastal flooding caused by storms and tsunamis, as well as inundation associated with longer term sea-level rise. Seismic-reflection and bathymetric data help characterize earthquake and tsunami sources, critical for natural-hazard assessments of coastal zones. Information on sediment distribution and thickness is essential to the understanding of local and regional sediment transport, as well as the development of regional sediment-management plans. In addition, siting of any new offshore infrastructure (for example, pipelines, cables, or renewable-energy facilities) will depend on high-resolution mapping. Finally, this mapping will both stimulate and enable new scientific research and also raise public awareness of, and education about, coastal environments and issues.

Shuttle Ground Operations Efficiencies/Technologies Study (SGOE/T). Volume 5: Technical Information Sheets (TIS)

NASA Technical Reports Server (NTRS)

Scholz, A. L.; Hart, M. T.; Lowry, D. J.

1987-01-01

The Technology Information Sheet was assembled in database format during Phase I. This document was designed to provide a repository for information pertaining to 144 Operations and Maintenance Instructions (OMI) controlled operations in the Orbiter Processing Facility (OPF), Vehicle Assembly Building (VAB), and PAD. It provides a way to accumulate information about required crew sizes, operations task time duration (serial and/or parallel), special Ground Support Equipment (GSE). required, and identification of a potential application of existing technology or the need for the development of a new technolgoy item.

Using smooth sheets to describe groundfish habitat in Alaskan waters, with specific application to two flatfishes

USGS Publications Warehouse

Zimmermann, Mark; Reid, Jane A.; Golden, Nadine

2016-01-01

In this analysis we demonstrate how preferred fish habitat can be predicted and mapped for juveniles of two Alaskan groundfish species – Pacific halibut (Hippoglossus stenolepis) and flathead sole (Hippoglossoides elassodon) – at five sites (Kiliuda Bay, Izhut Bay, Port Dick, Aialik Bay, and the Barren Islands) in the central Gulf of Alaska. The method involves using geographic information system (GIS) software to extract appropriate information from National Ocean Service (NOS) smooth sheets that are available from NGDC (the National Geophysical Data Center). These smooth sheets are highly detailed charts that include more soundings, substrates, shoreline and feature information than the more commonly-known navigational charts. By bringing the information from smooth sheets into a GIS, a variety of surfaces, such as depth, slope, rugosity and mean grain size were interpolated into raster surfaces. Other measurements such as site openness, shoreline length, proportion of bay that is near shore, areas of rocky reefs and kelp beds, water volumes, surface areas and vertical cross-sections were also made in order to quantify differences between the study sites. Proper GIS processing also allows linking the smooth sheets to other data sets, such as orthographic satellite photographs, topographic maps and precipitation estimates from which watersheds and runoff can be derived. This same methodology can be applied to larger areas, taking advantage of these free data sets to describe predicted groundfish essential fish habitat (EFH) in Alaskan waters.

Using smooth sheets to describe groundfish habitat in Alaskan waters, with specific application to two flatfishes

NASA Astrophysics Data System (ADS)

Zimmermann, Mark; Reid, Jane A.; Golden, Nadine

2016-10-01

In this analysis we demonstrate how preferred fish habitat can be predicted and mapped for juveniles of two Alaskan groundfish species - Pacific halibut (Hippoglossus stenolepis) and flathead sole (Hippoglossoides elassodon) - at five sites (Kiliuda Bay, Izhut Bay, Port Dick, Aialik Bay, and the Barren Islands) in the central Gulf of Alaska. The method involves using geographic information system (GIS) software to extract appropriate information from National Ocean Service (NOS) smooth sheets that are available from NGDC (the National Geophysical Data Center). These smooth sheets are highly detailed charts that include more soundings, substrates, shoreline and feature information than the more commonly-known navigational charts. By bringing the information from smooth sheets into a GIS, a variety of surfaces, such as depth, slope, rugosity and mean grain size were interpolated into raster surfaces. Other measurements such as site openness, shoreline length, proportion of bay that is near shore, areas of rocky reefs and kelp beds, water volumes, surface areas and vertical cross-sections were also made in order to quantify differences between the study sites. Proper GIS processing also allows linking the smooth sheets to other data sets, such as orthographic satellite photographs, topographic maps and precipitation estimates from which watersheds and runoff can be derived. This same methodology can be applied to larger areas, taking advantage of these free data sets to describe predicted groundfish essential fish habitat (EFH) in Alaskan waters.

Geometric Design Laboratory Fact Sheet

DOT National Transportation Integrated Search

2006-08-02

This fact sheet provides concise information about the Geometric Design Laboratory (GDL) at the Turner-Fairbank Highway Research Center. The mission of the GDL is to provide technical support to the Federal Highway Administration's Office of Safety R...

TSCA Chemical Data Reporting Fact Sheet: Reporting for Electricity Generating Sites

EPA Pesticide Factsheets

This fact sheet provides information on existing Chemical Data Reporting (CDR) rule requirements related to the reporting of chemical substances manufactured during operations conducted at electricity generating sites, such as utilities.

El Paso Natural Gas Mines Fact Sheets

EPA Pesticide Factsheets

These fact sheets contain information about El Paso Natural Gas Mines and the Western Abandoned Uranium Mine Region, 19 abandoned uranium mine claims generally located along the Little Colorado River or Highway 89 near Cameron, AZ.

Metals. Industrial Arts. Performance Objectives, Junior High School.

ERIC Educational Resources Information Center

Bunch, Edwood; And Others

Several intermediate performance objectives and corresponding criterion measures are listed for a metals course for seventh, eighth, and ninth grade students. The seventh grade section includes 13 terminal objectives for a 9-week course and provides exploratory units in bench metals and sheet metals. Industrial materials and processes receive…

A bundle with a preformatted medical order sheet and an introductory course to reduce prescription errors in neonates.

PubMed

Palmero, David; Di Paolo, Ermindo R; Beauport, Lydie; Pannatier, André; Tolsa, Jean-François

2016-01-01

The objective of this study was to assess whether the introduction of a new preformatted medical order sheet coupled with an introductory course affected prescription quality and the frequency of errors during the prescription stage in a neonatal intensive care unit (NICU). Two-phase observational study consisting of two consecutive 4-month phases: pre-intervention (phase 0) and post-intervention (phase I) conducted in an 11-bed NICU in a Swiss university hospital. Interventions consisted of the introduction of a new preformatted medical order sheet with explicit information supplied, coupled with a staff introductory course on appropriate prescription and medication errors. The main outcomes measured were formal aspects of prescription and frequency and nature of prescription errors. Eighty-three and 81 patients were included in phase 0 and phase I, respectively. A total of 505 handwritten prescriptions in phase 0 and 525 in phase I were analysed. The rate of prescription errors decreased significantly from 28.9% in phase 0 to 13.5% in phase I (p < 0.05). Compared with phase 0, dose errors, name confusion and errors in frequency and rate of drug administration decreased in phase I, from 5.4 to 2.7% (p < 0.05), 5.9 to 0.2% (p < 0.05), 3.6 to 0.2% (p < 0.05), and 4.7 to 2.1% (p < 0.05), respectively. The rate of incomplete and ambiguous prescriptions decreased from 44.2 to 25.7 and 8.5 to 3.2% (p < 0.05), respectively. Inexpensive and simple interventions can improve the intelligibility of prescriptions and reduce medication errors. Medication errors are frequent in NICUs and prescription is one of the most critical steps. CPOE reduce prescription errors, but their implementation is not available everywhere. Preformatted medical order sheet coupled with an introductory course decrease medication errors in a NICU. Preformatted medical order sheet is an inexpensive and readily implemented alternative to CPOE.

Application of SIR-B data for groundwater exploration in the Arabian shield and sand-drift monitoring in the AN Nafud and Al Jafurah fringe areas, Kingdom of Saudi Arabia

NASA Technical Reports Server (NTRS)

Berlin, G. L.; Tarabzouni, M. A.; Munshi, Z. M. N.; Chavez, P. S., Jr.

1984-01-01

The primary objectives of the investigation are to determine fully the utility of Shuttle Imaging Radar-B (SIR-B) images for providing valuable surface indicators for ground-water prospecting in the Arabian shield and to identify and assess defining characteristics of sand sheets, sand streaks, and sand dunes in the fringe areas of An Nafud and Al Jafurah. Specific objectives include the determination of the incremental contribution of incidence angle to the total information that can be extracted from SIR-B standard and digitally-enhanced images in the AL Jafurah fringe area; the determination of the incremental contribution of digitally-registered multisensor images; and the development of a groundwater exploration plan for the Ha'il test area in the Arabian Shield.

Clinical Social Work. State Laws Governing Independent Practice and Reimbursement of Services. Fact Sheet for the Honorable Daniel K. Inouye, United States Senate.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Div. of Human Resources.

This fact sheet on state laws governing the independent practice and reimbursement of services for clinical social workers contains information from questionnaires sent to the state agencies responsible for health insurance regulations and Medicaid and licensing activities. Information on Ohio, the only state which did not respond, is not…

Fuels planning: science synthesis and integration; environmental consequences fact sheet 01: Fire Effects Information System (FEIS)

Treesearch

Steve Sutherland

2004-01-01

The Fire Effects Information System (FEIS) provides accessible, up-to-date fire effects summaries, taken from current English-language literature, for almost 900 plant species, about 100 animal species, and 16 Kuchler plant communities found on the North American continent. This fact sheet discusses the development of FEIS and what is contained in the species summary....

Building clinical data groups for electronic medical record in China.

PubMed

Tu, Haibo; Yu, Yingtao; Yang, Peng; Tang, Xuejun; Hu, Jianping; Rao, Keqin; Pan, Feng; Xu, Yongyong; Liu, Danhong

2012-04-01

This article aims at building clinical data groups for Electronic Medical Records (EMR) in China. These data groups can be reused as basic information units in building the medical sheets of Electronic Medical Record Systems (EMRS) and serve as part of its implementation guideline. The results were based on medical sheets, the forms that are used in hospitals, which were collected from hospitals. To categorize the information in these sheets into data groups, we adopted the Health Level 7 Clinical Document Architecture Release 2 Model (HL7 CDA R2 Model). The regulations and legal documents concerning health informatics and related standards in China were implemented. A set of 75 data groups with 452 data elements was created. These data elements were atomic items that comprised the data groups. Medical sheet items contained clinical records information and could be described by standard data elements that exist in current health document protocols. These data groups match different units of the CDA model. Twelve data groups with 87 standardized data elements described EMR headers, and 63 data groups with 405 standardized data elements constituted the body. The later 63 data groups in fact formed the sections of the model. The data groups had two levels. Those at the first level contained both the second level data groups and the standardized data elements. The data groups were basically reusable information units that served as guidelines for building EMRS and that were used to rebuild a medical sheet and serve as templates for the clinical records. As a pilot study of health information standards in China, the development of EMR data groups combined international standards with Chinese national regulations and standards, and this was the most critical part of the research. The original medical sheets from hospitals contain first hand medical information, and some of their items reveal the data types characteristic of the Chinese socialist national health system. It is possible and critical to localize and stabilize the adopted international health standards through abstracting and categorizing those items for future sharing and for the implementation of EMRS in China.

Scanning light-sheet microscopy in the whole mouse brain with HiLo background rejection

PubMed Central

Mertz, Jerome; Kim, Jinhyun

2010-01-01

It is well known that light-sheet illumination can enable optically sectioned wide-field imaging of macroscopic samples. However, the optical sectioning capacity of a light-sheet macroscope is undermined by sample-induced scattering or aberrations that broaden the thickness of the sheet illumination. We present a technique to enhance the optical sectioning capacity of a scanning light-sheet microscope by out-of-focus background rejection. The technique, called HiLo microscopy, makes use of two images sequentially acquired with uniform and structured sheet illumination. An optically sectioned image is then synthesized by fusing high and low spatial frequency information from both images. The benefits of combining light-sheet macroscopy and HiLo background rejection are demonstrated in optically cleared whole mouse brain samples, using both green fluorescent protein (GFP)-fluorescence and dark-field scattered light contrast. PMID:20210471

Effect of Temperature and Sheet Temper on Isothermal Solidification Kinetics in Clad Aluminum Brazing Sheet

NASA Astrophysics Data System (ADS)

Benoit, Michael J.; Whitney, Mark A.; Wells, Mary A.; Winkler, Sooky

2016-09-01

Isothermal solidification (IS) is a phenomenon observed in clad aluminum brazing sheets, wherein the amount of liquid clad metal is reduced by penetration of the liquid clad into the core. The objective of the current investigation is to quantify the rate of IS through the use of a previously derived parameter, the Interface Rate Constant (IRC). The effect of peak temperature and initial sheet temper on IS kinetics were investigated. The results demonstrated that IS is due to the diffusion of silicon (Si) from the liquid clad layer into the solid core. Reduced amounts of liquid clad at long liquid duration times, a roughened sheet surface, and differences in resolidified clad layer morphology between sheet tempers were observed. Increased IS kinetics were predicted at higher temperatures by an IRC model as well as by experimentally determined IRC values; however, the magnitudes of these values are not in good agreement due to deficiencies in the model when applied to alloys. IS kinetics were found to be higher for sheets in the fully annealed condition when compared with work-hardened sheets, due to the influence of core grain boundaries providing high diffusivity pathways for Si diffusion, resulting in more rapid liquid clad penetration.

Monitoring Sand Sheets and Dunes

NASA Image and Video Library

2017-06-12

NASA's Mars Reconnaissance Orbiter (MRO) captured this crater featuring sand dunes and sand sheets on its floor. What are sand sheets? Snow fall on Earth is a good example of sand sheets: when it snows, the ground gets blanketed with up to a few meters of snow. The snow mantles the ground and "mimics" the underlying topography. Sand sheets likewise mantle the ground as a relatively thin deposit. This kind of environment has been monitored by HiRISE since 2007 to look for movement in the ripples covering the dunes and sheets. This is how scientists who study wind-blown sand can track the amount of sand moving through the area and possibly where the sand came from. Using the present environment is crucial to understanding the past: sand dunes, sheets, and ripples sometimes become preserved as sandstone and contain clues as to how they were deposited The map is projected here at a scale of 25 centimeters (9.8 inches) per pixel. [The original image scale is 25 centimeters (9.8 inches) per pixel (with 1 x 1 binning); objects on the order of 75 centimeters (29.5 inches) across are resolved.] North is up. https://photojournal.jpl.nasa.gov/catalog/PIA21757

Final Rule to Reduce Toxic Air Emissions from Asphalt Processing and Asphalt Roofing Manufacturing Facilities Fact Sheet

EPA Pesticide Factsheets

This page contains a February 2003 fact sheet with information regarding the National Emissions Standards for Hazardous Air Pollutants (NESHAP) for Asphalt Processing and Asphalt Roofing Manufacturing.

Energy-Saving Opportunities for Manufacturing Enterprises (International English Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This fact sheet provides information about the Industrial Technologies Program Save Energy Now energy audit process, software tools, training, energy management standards, and energy efficient technologies to help U.S. companies identify energy cost savings.

TSCA Chemical Data Reporting Fact Sheet: Byproducts Reporting for the Printed Circuit Board Industry

EPA Pesticide Factsheets

This fact sheet provides information on existing Chemical Data Reporting (CDR) rule requirements related to byproducts reporting by persons who manufacture printed circuit boards and may be subject to CDR.

The Research on Elevation Change of Antarctic Ice Sheet Based on CRYOSAT-2 Alimeter

NASA Astrophysics Data System (ADS)

Sun, Q.; Wan, J.; Liu, S.; Li, Y.

2018-04-01

In this paper, the Cryosat-2 altimeter data distributed by the ESA, and these data are processed to extract the information of the elevation change of the Antarctic ice sheet from 2010 to 2017. Firstly, the main pretreatment preprocessing for Cryosat-2 altimetry data is crossover adjustment and elimination of rough difference. Then the grid DEM of the Antarctic ice sheet was constructed by using the kriging interpolation method,and analyzed the spatial characteristic time characteristics of the Antarctic ice sheet. The latitude-weighted elevation can be obtained by using the elevation data of each cycle, and then the general trend of the Antarctic ice sheet elevation variation can be seen roughly.

Fuels planning: science synthesis and integration; social issues fact sheet 01: Developing personal responsibility for fuels reduction: Building a successful program to engage property owners

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

In the course of work as a land manager, you will no doubt be involved in developing programs to achieve various objectives, including the improvement of fuels management on private lands. This fact sheet describes six steps that will help you plan and conduct a successful program.

Wavefront coding for fast, high-resolution light-sheet microscopy (Conference Presentation)

NASA Astrophysics Data System (ADS)

Olarte, Omar E.; Licea-Rodriguez, Jacob; Loza-Alvarez, Pablo

2017-02-01

Some biological experiments demand the observation of dynamics processes in 3D with high spatiotemporal resolution. The use of wavefront coding to extend the depth-of-field (DOF) of the collection arm of a light-sheet microscope is an interesting alternative for fast 3D imaging. Under this scheme, the 3D features of the sample are captured at high volumetric rates while the light sheet is swept rapidly within the extended DOF. The DOF is extended by coding the pupil function of the imaging lens by using a custom-designed phase mask. A posterior restoration step is required to decode the information of the captured images based on the applied phase mask [1]. This hybrid optical-digital approach is known as wavefront coding (WFC). Previously, we have demonstrated this method for performing fast 3D imaging of biological samples at medium resolution [2]. In this work, we present the extension of this approach for high-resolution microscopes. Under these conditions, the effective DOF of a standard high NA objective is of a few micrometers. Here we demonstrate that by the use of WFC, we can extend the DOF more than one order of magnitude keeping the high-resolution imaging. This is demonstrated for two designed phase masks using Zebrafish and C. elegans samples. [1] Olarte, O.E., Andilla, J., Artigas, D., and Loza-Alvarez, P., "Decoupled Illumination-Detection Microscopy. Selected Optics in Year 2105," in Optics and Photonics news 26, p. 41 (2015). [2] Olarte, O.E., Andilla, J., Artigas, D., and Loza-Alvarez, P., "Decoupled illumination detection in light sheet microscopy for fast volumetric imaging," Optica 2(8), 702 (2015).

Sketching Designs Using the Five Design-Sheet Methodology.

PubMed

Roberts, Jonathan C; Headleand, Chris; Ritsos, Panagiotis D

2016-01-01

Sketching designs has been shown to be a useful way of planning and considering alternative solutions. The use of lo-fidelity prototyping, especially paper-based sketching, can save time, money and converge to better solutions more quickly. However, this design process is often viewed to be too informal. Consequently users do not know how to manage their thoughts and ideas (to first think divergently, to then finally converge on a suitable solution). We present the Five Design Sheet (FdS) methodology. The methodology enables users to create information visualization interfaces through lo-fidelity methods. Users sketch and plan their ideas, helping them express different possibilities, think through these ideas to consider their potential effectiveness as solutions to the task (sheet 1); they create three principle designs (sheets 2,3 and 4); before converging on a final realization design that can then be implemented (sheet 5). In this article, we present (i) a review of the use of sketching as a planning method for visualization and the benefits of sketching, (ii) a detailed description of the Five Design Sheet (FdS) methodology, and (iii) an evaluation of the FdS using the System Usability Scale, along with a case-study of its use in industry and experience of its use in teaching.

Visualization of Topology through Simulation

NASA Astrophysics Data System (ADS)

Mulderig, Andrew; Beaucage, Gregory; Vogtt, Karsten; Jiang, Hanqiu

Complex structures can be decomposed into their minimal topological description coupled with complications of tortuosity. We have found that a stick figure representation can account for the topological content of any structure and coupling with scaling measures of tortuosity we can reconstruct an object. This deconstruction is native to static small-angle scattering measurements where we can obtain quantitative measures of the tortuous structure and the minimal topological structure. For example, a crumpled sheet of paper is composed of a minimal sheet structure and parameters reflecting the extent of crumpling. This quantification yields information that can be used to calculate the hydrodynamic radius, radius of gyration, structural conductive pathway, modulus, and other properties of complex structures. The approach is general and has been applied to a wide range of nanostructures from crumpled graphene to branched polymers and unfolded proteins and RNA. In this poster we will demonstrate how simple structural simulations can be used to reconstruct from these parameters a 3d representation of the complex structure through a heuristic approach. Several examples will be given from nano-fractal aggregates.

Design of Student Information Management Database Application System for Office and Departmental Target Responsibility System

NASA Astrophysics Data System (ADS)

Zhou, Hui

It is the inevitable outcome of higher education reform to carry out office and departmental target responsibility system, in which statistical processing of student's information is an important part of student's performance review. On the basis of the analysis of the student's evaluation, the student information management database application system is designed by using relational database management system software in this paper. In order to implement the function of student information management, the functional requirement, overall structure, data sheets and fields, data sheet Association and software codes are designed in details.

Fact Sheet: Reporting After Changes to Company Ownership or Legal Identity

EPA Pesticide Factsheets

This fact sheet provides information for persons who may be subject to the Chemical Data Reporting (CDR) rule about issues related to changes to company ownership or legal identity which may affect reporting for 2016.

Fact Sheet: Final Rule to Reduce Air Toxics Emissions from Area Source Paints and Allied Products Manufacturing Facilities

EPA Pesticide Factsheets

This page contains a November 2009 fact sheet with information regarding the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Area Sources of Paints and Allied Products Manufacturing.

Cancer in Children and Adolescents | Office of Cancer Genomics

Cancer.gov

View a fact sheet that has statistics as well as information about types, causes, and treatments of cancers in children and adolescents in the United States. https://www.cancer.gov/types/childhood-cancers/child-adolescent-cancers-fact-sheet

ALTERNATIVE ENERGY SOURCES FOR WASTEWATER TREATMENT PLANTS

EPA Science Inventory

The technology assessment provides an introduction to the use of several alternative energy sources at wastewater treatment plants. The report contains fact sheets (technical descriptions) and data sheets (cost and design information) for the technologies. Cost figures and schema...

Carbon decorative coatings by dip-, spin-, and spray-assisted layer-by-layer assembly deposition.

PubMed

Hong, Jinkee; Kang, Sang Wook

2011-09-01

We performed a comparative surface analysis of all-carbon nano-objects (multiwall carbon nanotubes (MWNT) or graphene oxide (GO) sheets) based multilayer coatings prepared using three widely used nanofilm fabrication methods: dip-, spin-, and spray-assisted layer-by-layer (LbL) deposition. The resultant films showed a marked difference in their growth mechanisms and surface morphologies. Various carbon decorative coatings were synthesized with different surface roughness values, despite identical preparation conditions. In particular, smooth to highly rough all-carbon surfaces, as determined by atomic force microscopy (AFM) and scanning electron microscopy (SEM), were readily obtained by manipulating the LbL deposition methods. As was confirmed by the AFM and SEM analyses, this finding indicated the fundamental morphological evolution of one-dimensional nano-objects (MWNT) and two-dimensional nano-objects (GO) by control of the surface roughness through the deposition method. Therefore, an analysis of the three LbL-assembly methods presented herein may offer useful information about the industrial use of carbon decorative coatings and provide an insight into ways to control the structures of multilayer coatings by tuning the morphologies of carbon nano-objects.

Characterization and optimization of flexible dual mode sensor based on Carbon Micro Coils

NASA Astrophysics Data System (ADS)

Dat Nguyen, Tien; Kim, Taeseung; Han, Hyoseung; Shin, Hyun Yeong; Nguyen, Canh Toan; Phung, Hoa; Ryeol Choi, Hyouk

2018-01-01

Carbon Microcoils (CMCs) is a 3D helical micro structure grown via a chemical vapor deposition process. It is noted that composites in which CMCs are embedded in polymer matrixes, called CMC sheets, experience a drastic change of electrical impedance depending on the proximity and contact of external objects. In this paper, a dual functional sensor, that is, tactile and proximity sensor fabricated with CMC/silicone composite is presented to demonstrate the advanced characteristics of CMCs sheets. Characteristics of sensor responses depending on CMC compositions are investigated and optimal conditions are determined. The candidates of polymer matrices are also investigated. As the results, the CMC sheet consisting of Ecoflex 30, CMC 30 {{wt}} % , and multiwall carbon nanotubes 1 {{wt}} % shows the most appropriate tactile sensing characteristics with more than 1 mm of thickness. The proximity sensing capability is the maximum when the 1.5 {{wt}} % CMC content is mixed with Dragon skin 30 silicone substrate. Finally, multiple target objects are recognized with the results and their feasibilities are experimentally validated.

Chemical Data Reporting Fact Sheet: Chemicals Snapshot

EPA Pesticide Factsheets

This fact sheet provides a brief overview of the chemical manufacturing, processing, and use information collected for the 2012 Chemical Data Reporting (CDR) rule. Users do not have access to the complete CDR data set and should draw conclusions with care.

Strike It Rich with Classroom Compost.

ERIC Educational Resources Information Center

Jones, Linda L. Cronin

1992-01-01

Discusses composting of organic materials as an alternative to landfills. Lists uses of composts and describes details of a simple composting activity for high school students. Includes an information sheet for students and a student data sheet. Suggests other composting activities. (PR)

Fact Sheets: Final Air Toxics Rules for Ethylene Oxide Emissions from Commercial Sterilization and Fumigation Operations

EPA Pesticide Factsheets

This page contains November 1994 and November 1999 fact sheets with information regarding the Final Ethylene Oxide Emissions Standards for Sterilization Facilities. These documents contain answers to common questions for this NESHAP

SPED light sheet microscopy: fast mapping of biological system structure and function

PubMed Central

Tomer, Raju; Lovett-Barron, Matthew; Kauvar, Isaac; Andalman, Aaron; Burns, Vanessa M.; Sankaran, Sethuraman; Grosenick, Logan; Broxton, Michael; Yang, Samuel; Deisseroth, Karl

2016-01-01

The goal of understanding living nervous systems has driven interest in high-speed and large field-of-view volumetric imaging at cellular resolution. Light-sheet microscopy approaches have emerged for cellular-resolution functional brain imaging in small organisms such as larval zebrafish, but remain fundamentally limited in speed. Here we have developed SPED light sheet microscopy, which combines large volumetric field-of-view via an extended depth of field with the optical sectioning of light sheet microscopy, thereby eliminating the need to physically scan detection objectives for volumetric imaging. SPED enables scanning of thousands of volumes-per-second, limited only by camera acquisition rate, through the harnessing of optical mechanisms that normally result in unwanted spherical aberrations. We demonstrate capabilities of SPED microscopy by performing fast sub-cellular resolution imaging of CLARITY mouse brains and cellular-resolution volumetric Ca2+ imaging of entire zebrafish nervous systems. Together, SPED light sheet methods enable high-speed cellular-resolution volumetric mapping of biological system structure and function. PMID:26687363

Bedrock geologic map of the Hartland and North Hartland quadrangles, Windsor County, Vermont, and Sullivan and Grafton Counties, New Hampshire

USGS Publications Warehouse

Walsh, Gregory J.

2016-08-16

This report consists of sheets 1 and 2 as well as an online geographic information systems database that includes contacts of bedrock geologic units, faults, outcrops, structural geologic information, and photographs. Sheet 2 of this report shows three cross sections, a tectonic map, and two brittle features maps that show measured outcrop-scale strike and dip results with summary stereonets and rose diagrams.

Missing Children. Missing Children Data Collected by the National Crime Information Center. Fact Sheet for the Honorable Alfonse M. D'Amato, United States Senate.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

This document is a fact sheet on missing children data collected by the National Crime Information Center (NCIC). The document contains details on the design of the NCIC system, state control for management and use of the system, access to the system, criteria for missing persons, number of active cases, and the unidentified persons file of the…

Shared Services Boards. An Analysis of the Development of a Pioneering Educational Experiment in Suburban and Rural Areas of New York State.

ERIC Educational Resources Information Center

De La Fleur, Frederick J.

An effort to determine and describe the status of the shared services boards of the State of New York is described. By means of a 5-sheet questionnaire, information was gained regarding the status of the shared services boards, what they are doing, and how they were developed. This information is analyzed in the document. A sixth sheet was added…

Keys to a successful project: Associated data and planning: Data standards. Chapter 5 in Measuring and monitoring biological diversity: Standard methods for amphibians

USGS Publications Warehouse

McDiarmid, Roy W.; Heyer, W. Ronald; Donnelly, Maureen A.; McDiarmid, Roy W.; Hayek, Lee-Ann C.; Foster, Mercedes S.

1994-01-01

The many individual salamanders, frogs, caecilians, and their larvae encountered during the course of an inventory or monitoring project will have to be identified to species. Depending on the goals and sampling method(s) used, some individuals will be identified from a distance by their calls, others will be handled. At the same time, some will be marked for recapture, and others will be sampled as vouchers. For each, certain minimum data should be recorded. In this section, data pertaining to locality and sampling methodology are considered, information on microhabitats and specimen vouchers is covered in sections that follow. I feel strongly that the data outlined here should be the minimum for any project. Investigators with specific goals may require additional types of data as well.Standardized, printed sheets containing the required data categories provide a convenient, inexpensive, and effective way to ensure that all the desired information is recorded in a consistent format, Data sheets should be well organized, printed on good-quality paper (75%-100% cotton content) and include extra space (e.g., other side of sheet) for notes that do not fit preestablished categoriesData should be recorded in the field with permanent (waterproof) ink as simply and directly as possible. I strongly recommend against the use of data codes in the field; it is too easy to forget codes or to enter the wrong code. Original data sheets can be photocopied for security, but they should not be copied by hand. If data are to be coded for computer analysis, the original or photocopied sheets should be used for data entry to minimize transcription errors. Some workers prefer recording information on small tape recorders; this also works well if a list of the standard data categories is checked during taping to ensure that all required information is recorded. Information recorded on tapes should be transcribed to data sheets or into a computer within 24 hours of the sample.

Bibliography of groundwater resources of the glacial aquifer systems in Washington, Idaho, and northwestern Montana, 1905-2011

USGS Publications Warehouse

Kahle, Sue C.; Futornick, Zoe O.

2012-01-01

The U.S. Geological Survey Groundwater Resources Program is undertaking a series of regional groundwater availability studies to improve our understanding of groundwater availability in major aquifers across the Nation. One of the objectives of the Glacial Principal Aquifers study (proposed) is to provide information on the occurrence of groundwater in glacial aquifers in the United States, an area that includes parts of the northern continental States and much of Alaska. Toward this effort, a literature search was conducted to identify readily available documents that describe the occurrence of groundwater in glacial aquifers in the United States. This bibliography provides citations for documents, as well as codes indicating types of information available in each, for Washington, Idaho, and northwestern Montana—an area corresponding approximately to the southern extent of the Cordilleran ice sheet.

Estimating erosion in a riverine watershed: Bayou Liberty-Tchefuncta River in Louisiana.

PubMed

Martin, August; Gunter, James T; Regens, James L

2003-01-01

GOAL, SCOPE, BACKGROUND: Sheet erosion from agricultural, forest and urban lands may increase stream sediment loads as well as transport other pollutants that adversely affect water quality, reduce agricultural and forest production, and increase infrastructure maintenance costs. This study uses spatial analysis techniques and a numerical modeling approach to predict areas with the greatest sheet erosion potential given different soils disturbance scenarios. A Geographic Information System (GIS) and the Universal Soil Loss Equation (USLE) were used to estimate sheet erosion from 0.64 ha parcels of land within the watershed. The Soil Survey of St. Tammany Parish, Louisiana was digitized, required soil attributes entered into the GIS database, and slope factors determined for each 80 x 80 meter parcel in the watershed. The GIS/USLE model used series-specific erosion K factors, a rainfall factor of 89, and a GIS database of scenario-driven cropping and erosion control practice factors to estimate potential soil loss due to sheet erosion. A general trend of increased potential sheet erosion occurred for all land use categories (urban, agriculture/grasslands, forests) as soil disturbance increases from cropping, logging and construction activities. Modeling indicated that rapidly growing urban areas have the greatest potential for sheet erosion. Evergreen and mixed forests (production forest) had lower sheet erosion potentials; with deciduous forests (mostly riparian) having the least sheet erosion potential. Erosion estimates from construction activities may be overestimated because of the value chosen for the erosion control practice factor. This study illustrates the ease with which GIS can be integrated with the Universal Soil Loss Equation to identify areas with high sheet erosion potential for large scale management and policy decision making. The GIS/USLE modeling approach used in this study offers a quick and inexpensive tool for estimating sheet erosion within watersheds using publicly available information. This method can quickly identify discrete locations with relatively precise spatial boundaries (approximately 80 meter resolution) that have a high sheet erosion potential as well as areas where management interventions might be appropriate to prevent or ameliorate erosion.

Careers "Fact Sheets" for clinical engineering & biomedical technology.

PubMed

Pacela, A F

1991-01-01

Three Careers "Fact Sheets" include information on CE and BMET job titles, job descriptions, and certification. These materials are intended to aid in furthering professional recognition for Clinical Engineers and BMETs, and may be useful in communicating with Administration or Human Resources departments.

Fact Sheet: Notice of Ambient Water Quality Criteria Document for Tributyltin (TBT) - Final

EPA Pesticide Factsheets

Information pertaining to 2004 Final Acute and Chronic Ambient Aquatic Life Water Quality Criteria for Tributyltin (TBT) for freshwater and saltwater. This fact sheet includes the safe levels of TBT that should protect the majority of species.

Media Monday tip sheet builds Spartanburg's media relations.

PubMed

Rees, Tom

2005-01-01

Media Monday is published weekly and sent to area newsrooms by the Spartanburg Regional Healthcare System, Spartanburg, S.C. The news and feature tip sheet was started in 1998 in order to disperse a lot of information with a limited number of staff.

Facts for Feeding Series.

ERIC Educational Resources Information Center

Academy for Educational Development, Washington, DC.

This document compiles several fact sheets, in multiple languages, for mothers and parent educators providing information and answering questions concerning breastfeeding infants. The fact sheets are published in English, French, and Spanish, and cover the following topics: (1) "Recommended Practices To Improve Infant Nutrition during the…

Fact Sheet: Control Techniques Guidelines (CTG) for Shipbuilding and Ship Repair Facilities Operation (Surface Coating)

EPA Pesticide Factsheets

This page contains an August 1996 fact sheet with information regarding the CTG and Alternative Control Techniques (ACT) for Surface Coating at Shipbuilding and Ship Repair Facilities Operations. This document provides a summary of this guidance

Altitude, depth, and thickness of the Galena-Platteville Bedrock Unit in the subcrop area of Illinois and Wisconsin

USGS Publications Warehouse

Brown, Timothy A.; Dunning, Charles P.; Sharpe, Jennifer B.

2000-01-01

The report series will enable investigators involved in site-specific studies within the subcrop area to understand the regional geologic framework of the unit and to find additional reference sources. This report consists of four sheets that show the altitude (sheet 1), depth from land surface (sheet 2), total thickness (sheet 3), and location of altitude data (sheet 4) of the lithologic units that constitute the Galena-Platteville bedrock unit within the subcrop area. The sheets also show major known geologic features within the Galena-Platteville study area in Illinois and Wisconsin. A geographic information system (GIS) was used to generate data layers (coverages) from point data and from published and unpublished contour maps at various scales and detail. Standard GIS procedures were used to change the coverages into the maps shown on the sheets presented in this report. A list of references for the data used to prepare the maps is provided. 

An effective self-assessment based on concept map extraction from test-sheet for personalized learning

NASA Astrophysics Data System (ADS)

Liew, Keng-Hou; Lin, Yu-Shih; Chang, Yi-Chun; Chu, Chih-Ping

2013-12-01

Examination is a traditional way to assess learners' learning status, progress and performance after a learning activity. Except the test grade, a test sheet hides some implicit information such as test concepts, their relationships, importance, and prerequisite. The implicit information can be extracted and constructed a concept map for considering (1) the test concepts covered in the same question means these test concepts have strong relationships, and (2) questions in the same test sheet means the test concepts are relative. Concept map has been successfully employed in many researches to help instructors and learners organize relationships among concepts. However, concept map construction depends on experts who need to take effort and time for the organization of the domain knowledge. In addition, the previous researches regarding to automatic concept map construction are limited to consider all learners of a class, which have not considered personalized learning. To cope with this problem, this paper proposes a new approach to automatically extract and construct concept map based on implicit information in a test sheet. Furthermore, the proposed approach also can help learner for self-assessment and self-diagnosis. Finally, an example is given to depict the effectiveness of proposed approach.

Uncertainty Quantification for Ice Sheet Science and Sea Level Projections

NASA Astrophysics Data System (ADS)

Boening, C.; Schlegel, N.; Limonadi, D.; Schodlok, M.; Seroussi, H. L.; Larour, E. Y.; Watkins, M. M.

2017-12-01

In order to better quantify uncertainties in global mean sea level rise projections and in particular upper bounds, we aim at systematically evaluating the contributions from ice sheets and potential for extreme sea level rise due to sudden ice mass loss. Here, we take advantage of established uncertainty quantification tools embedded within the Ice Sheet System Model (ISSM) as well as sensitivities to ice/ocean interactions using melt rates and melt potential derived from MITgcm/ECCO2. With the use of these tools, we conduct Monte-Carlo style sampling experiments on forward simulations of the Antarctic ice sheet, by varying internal parameters and boundary conditions of the system over both extreme and credible worst-case ranges. Uncertainty bounds for climate forcing are informed by CMIP5 ensemble precipitation and ice melt estimates for year 2100, and uncertainty bounds for ocean melt rates are derived from a suite of regional sensitivity experiments using MITgcm. Resulting statistics allow us to assess how regional uncertainty in various parameters affect model estimates of century-scale sea level rise projections. The results inform efforts to a) isolate the processes and inputs that are most responsible for determining ice sheet contribution to sea level; b) redefine uncertainty brackets for century-scale projections; and c) provide a prioritized list of measurements, along with quantitative information on spatial and temporal resolution, required for reducing uncertainty in future sea level rise projections. Results indicate that ice sheet mass loss is dependent on the spatial resolution of key boundary conditions - such as bedrock topography and melt rates at the ice-ocean interface. This work is performed at and supported by the California Institute of Technology's Jet Propulsion Laboratory. Supercomputing time is also supported through a contract with the National Aeronautics and Space Administration's Cryosphere program.

Airborne Tomographic Swath Ice Sounding Processing System

NASA Technical Reports Server (NTRS)

Wu, Xiaoqing; Rodriquez, Ernesto; Freeman, Anthony; Jezek, Ken

2013-01-01

Glaciers and ice sheets modulate global sea level by storing water deposited as snow on the surface, and discharging water back into the ocean through melting. Their physical state can be characterized in terms of their mass balance and dynamics. To estimate the current ice mass balance, and to predict future changes in the motion of the Greenland and Antarctic ice sheets, it is necessary to know the ice sheet thickness and the physical conditions of the ice sheet surface and bed. This information is required at fine resolution and over extensive portions of the ice sheets. A tomographic algorithm has been developed to take raw data collected by a multiple-channel synthetic aperture sounding radar system over a polar ice sheet and convert those data into two-dimensional (2D) ice thickness measurements. Prior to this work, conventional processing techniques only provided one-dimensional ice thickness measurements along profiles.

Orientation determination of interfacial beta-sheet structures in situ.

PubMed

Nguyen, Khoi Tan; King, John Thomas; Chen, Zhan

2010-07-01

Structural information such as orientations of interfacial proteins and peptides is important for understanding properties and functions of such biological molecules, which play crucial roles in biological applications and processes such as antimicrobial selectivity, membrane protein activity, biocompatibility, and biosensing performance. The alpha-helical and beta-sheet structures are the most widely encountered secondary structures in peptides and proteins. In this paper, for the first time, a method to quantify the orientation of the interfacial beta-sheet structure using a combined attenuated total reflectance Fourier transformation infrared spectroscopic (ATR-FTIR) and sum frequency generation (SFG) vibrational spectroscopic study was developed. As an illustration of the methodology, the orientation of tachyplesin I, a 17 amino acid peptide with an antiparallel beta-sheet, adsorbed to polymer surfaces as well as associated with a lipid bilayer was determined using the regular and chiral SFG spectra, together with polarized ATR-FTIR amide I signals. Both the tilt angle (theta) and the twist angle (psi) of the beta-sheet at interfaces are determined. The developed method in this paper can be used to obtain in situ structural information of beta-sheet components in complex molecules. The combination of this method and the existing methodology that is currently used to investigate alpha-helical structures will greatly broaden the application of optical spectroscopy in physical chemistry, biochemistry, biophysics, and structural biology.

The Antarctic Ice.

ERIC Educational Resources Information Center

Radok, Uwe

1985-01-01

The International Antarctic Glaciological Project has collected information on the East Antarctic ice sheet since 1969. Analysis of ice cores revealed climatic history, and radar soundings helped map bedrock of the continent. Computer models of the ice sheet and its changes over time will aid in predicting the future. (DH)

Final Air Toxics Standards for Clay Ceramics Manufacturing, Glass Manufacturing, and Secondary Nonferrous Metals Processing Area Sources Fact Sheet

EPA Pesticide Factsheets

This page contains a December 2007 fact sheet with information regarding the National Emissions Standards for Hazardous Air Pollutants (NESHAP) for Clay Ceramics Manufacturing, Glass Manufacturing, and Secondary Nonferrous Metals Processing Area Sources

THE LANGUAGE LABORATORY--WORK SHEET.

ERIC Educational Resources Information Center

CROSBIE, KEITH

DESIGNED FOR TEACHERS AND ADMINISTRATORS, THIS WORK SHEET PROVIDES GENERAL AND SPECIFIC INFORMATION ABOUT THE PHILOSOPHY, TYPES, AND USES OF LANGUAGE LABORATORIES IN SECONDARY SCHOOL LANGUAGE PROGRAMS. THE FIRST SECTION DISCUSSES THE ADVANTAGES OF USING THE LABORATORY EFFECTIVELY TO REINFORCE AND CONSOLIDATE CLASSROOM LEARNING, AND MENTIONS SOME…

3D modelling of the Tejeda Caldera cone-sheet swarm, Gran Canaria, Canary Islands, Spain

NASA Astrophysics Data System (ADS)

Samrock, Lisa K.; Jensen, Max J.; Burchardt, Steffi; Troll, Valentin R.; Mattsson, Tobias; Geiger, Harri

2015-04-01

Cone-sheet swarms provide vital information on the interior of volcanic systems and their plumbing systems (e.g. Burchardt et al. 2013). This information is important for the interpretation of processes and dynamics of modern and ancient volcanic systems, and is therefore vital for assessing volcanic hazards and to reduce risks to modern society. To more realistically model cone-sheet emplacement an approximation of their 3D shape needs to be known. Most cone-sheet swarms are not sufficiently exposed laterally and/or vertically, however, which makes it difficult to determine the geometry of a cone-sheet swarm at depth, especially since different shapes (e.g. convex, straight or concave continuations) would produce a similar trace at the surface (cf. Burchardt et al. 2011, and references therein). The Miocene Tejeda Caldera on Gran Canaria, Canary Islands, Spain, hosts a cone-sheet swarm that was emplaced into volcaniclastic caldera infill at about 12.3-7.3 Ma (Schirnick et al. 1999). The dyke swarm displays over 1000 m of vertical exposure and more than 15 km of horizontal exposure, making it a superb locality to study the evolution of cone-sheet swarms in detail and to determine its actual geometry in 3D space. We have used structural data of Schirnick (1996) to model the geometry of the Tejeda cone-sheet in 3D, using the software Move® by Midland Valley Ltd. Based on previous 2D projections, Schirnick et al. (1999) suggested that the cone-sheet swarm is formed by a stack of parallel intrusive sheets which have a truncated dome geometry and form a concentric structure around a central axis, assuming straight sheet-intrusions. Our 3D model gives insight into the symmetries of the sheets and the overall geometry of the cone-sheet swarm below the surface. This visualization now allows to grasp the complexity of the Tejeda cone-sheet swarm at depth, particularly in relation to different possible cone-sheet geometries suggested in the literature (cf. Burchardt et al. 2011, and references therein), and we discuss the implications of this architecture for the feeding system of the Tejeda volcano and the associated temporal variations of cone-sheet emplacement. References: Burchardt, S., Tanner, D.C., Troll, V.R., Krumbholz, M., Gustafsson, L.E. (2011) Three-dimensional geometry of concentric intrusive sheet swarms in the Geitafell and the Dyrfjöll volcanoes, eastern Iceland. Geochemistry, Geophysics, Geosystems 12(7): Q0AB09. Burchardt, S., Troll, V.R., Mathieu, L., Emeleus, H.C., Donaldson, C.H. (2013) Ardnamruchan 3D cone-sheet architecture explained by a single elongate magma chamber. Scientific Reports 3:2891. Schirnick, C. (1996) Formation of an intracaldera cone sheet dike swarm (Tejeda Caldera, Gran Canaria) (Dissertation). Christian-Albrechts-Universität, Kiel, Germany. Schirnick, C., van den Bogaard, P., Schmincke, H.-U. (1999) Cone-sheet formation and intrusive growth of an oceanic island - The Miocene Tejeda complex on Gran Canaria (Canary Islands). Geology, 27: 207-210.

Multi objective Taguchi optimization approach for resistance spot welding of cold rolled TWIP steel sheets

NASA Astrophysics Data System (ADS)

Tutar, Mumin; Aydin, Hakan; Bayram, Ali

2017-08-01

Formability and energy absorption capability of a steel sheet are highly desirable properties in manufacturing components for automotive applications. TWinning Induced Plastisity (TWIP) steels are, new generation high Mn alloyed steels, attractive for the automotive industry due to its outstanding elongation (%40-45) and tensile strength (~1000MPa). So, TWIP steels provide excellent formability and energy absorption capability. Another required property from the steel sheets is suitability for manufacturing methods such as welding. The use of the steel sheets in the automotive applications inevitably involves welding. Considering that there are 3000-5000 welded spots on a vehicle, it can be interpreted that one of the most important manufacturing method is Resistance Spot Welding (RSW) for the automotive industry. In this study; firstly, TWIP steel sheet were cold rolled to 15% reduction in thickness. Then, the cold rolled TWIP steel sheets were welded with RSW method. The welding parameters (welding current, welding time and electrode force) were optimized for maximizing the peak tensile shear load and minimizing the indentation of the joints using a Taguchi L9 orthogonal array. The effect of welding parameters was also evaluated by examining the signal-to-noise ratio and analysis of variance (ANOVA) results.

Superplastic Forming/Adhesive Bonding of Aluminum (SPF/AB) Multi-Sheet Structures

NASA Technical Reports Server (NTRS)

Wagner, John A. (Technical Monitor); Will, Jeff D.; Cotton, James D.

2003-01-01

A significant fraction of airframe structure consists of stiffened panels that are costly and difficult to fabricate. This program explored a potentially lower-cost processing route for producing such panels. The alternative process sought to apply concurrent superplastic forming and adhesive bonding of aluminum alloy sheets. Processing conditions were chosen to balance adequate superplasticity of the alloy with thermal stability of the adhesive. As a first objective, an air-quenchable, superplastic aluminum-lithium alloy and a low-volatile content, low-viscosity adhesive with compatible forming/curing cycles were identified. A four-sheet forming pack was assembled which consisted of a welded two-sheet core separated from the face sheets by a layer of adhesive. Despite some preliminary success, of over 30 forming trials none was completely successful. The main problem was inadequate superplasticity in the heat-affected zones of the rib welds, which generally fractured prior to completion of the forming cycle. The welds are a necessary component in producing internal ribs by the 'four-sheet' process. Other challenges, such as surface preparation and adhesive bonding, were adequately solved. But without the larger issue of tearing at the weld locations, complex panel fabrication by SPF/AB does not appear viable.

Effect of the material properties on the crumpling of a thin sheet.

PubMed

Habibi, Mehdi; Adda-Bedia, Mokhtar; Bonn, Daniel

2017-06-07

While simple at first glance, the dense packing of sheets is a complex phenomenon that depends on material parameters and the packing protocol. We study the effect of plasticity on the crumpling of sheets of different materials by performing isotropic compaction experiments on sheets of different sizes and elasto-plastic properties. First, we quantify the material properties using a dimensionless foldability index. Then, the compaction force required to crumple a sheet into a ball as well as the average number of layers inside the ball are measured. For each material, both quantities exhibit a power-law dependence on the diameter of the crumpled ball. We experimentally establish the power-law exponents and find that both depend nonlinearly on the foldability index. However the exponents that characterize the mechanical response and morphology of the crumpled materials are related linearly. A simple scaling argument explains this in terms of the buckling of the sheets, and recovers the relation between the crumpling force and the morphology of the crumpled structure. Our results suggest a new approach to tailor the mechanical response of the crumpled objects by carefully selecting their material properties.

Single clay sheets inside electrospun polymer nanofibers

NASA Astrophysics Data System (ADS)

Sun, Zhaohui

2005-03-01

Nanofibers were prepared from polymer solution with clay sheets by electrospinning. Plasma etching, as a well controlled process, was used to supply electrically excited gas molecules from a glow discharge. To reveal the structure and arrangement of clay layers in the polymer matrix, plasma etching was used to remove the polymer by controlled gasification to expose the clay sheets due to the difference in reactivity. The shape, flexibility, and orientation of clay sheets were studied by transmission and scanning electron microscopy. Additional quantitative information on size distribution and degree of exfoliation of clay sheets were obtained by analyzing electron micrograph of sample after plasma etching. Samples in various forms including fiber, film and bulk, were thinned by plasma etching. Morphology and dispersion of inorganic fillers were studied by electron microscopy.

Low-cost solar array project progress and plans

NASA Technical Reports Server (NTRS)

Callaghan, W. T.

1981-01-01

The considered project is part of the DOE Photovoltaic Technology and Market Development Program. This program is concerned with the development and the utilization of cost-competitive photovoltaic systems. The project has the objective to develop, by 1986, the national capability to manufacture low-cost, long-life photovoltaic arrays at production rates that will realize economies of scale, and at a price of less than $0.70/watt. The array performance objectives include an efficiency greater than 10% and an operating lifetime longer than 20 years. The objective of the silicon material task is to establish the practicality of processes for producing silicon suitable for terrestrial photovoltaic applications at a price of $14/kg. The large-area sheet task is concerned with the development of process technology for sheet formation. Low-cost encapsulation material systems are being developed in connection with the encapsulation task. Another project goal is related to the development of economical process sequences.

Sexually Transmitted Diseases: A Selective, Annotated Bibliography.

ERIC Educational Resources Information Center

Planned Parenthood Federation of America, Inc., New York, NY. Education Dept.

This document contains a reference sheet and an annotated bibliography concerned with sexually transmitted diseases (STD). The reference sheet provides a brief, accurate overview of STDs which includes both statistical and background information. The bibliography contains 83 entries, listed alphabetically, that deal with STDs. Books and articles…

Fact Sheets and Additional Information Regarding the 2006 Particulate Matter (PM) National Ambient Air Quality Standards (NAAQS)

EPA Pesticide Factsheets

This page contains a fact sheet, a presentation providing an overview of the rule, and graphs and maps pertaining to the new standards that are supplementary to the October 2006 revision for the Particulate Matter (PM) NAAQS

Final Regulations to Reduce Toxic Air Pollutant Emissions from Brick and Structural Clay Products Manufacturing and Clay Ceramics Manufacturing Fact Sheets

EPA Pesticide Factsheets

This page contains a February 2003 and September 2015 fact sheet with information regarding the final rules to the NESHAP for Brick and Structural Clay Products Manufacturing and the NESHAP for Clay Ceramics Manufacturing

Career Preparation Program Curriculum Guide for: Metal Fabrication, Sheet Metal.

ERIC Educational Resources Information Center

British Columbia Dept. of Education, Victoria. Curriculum Development Branch.

This curriculum outline provides secondary and postsecondary instructors with detailed information on student learning outcomes for completion of the sheet metal fabrication program requirements. A program overview discusses the aims of education; secondary school philosophy; and career preparation programs and their goals, organization, and…

Learning from Balance Sheet Visualization

ERIC Educational Resources Information Center

Tanlamai, Uthai; Soongswang, Oranuj

2011-01-01

This exploratory study examines alternative visuals and their effect on the level of learning of balance sheet users. Executive and regular classes of graduate students majoring in information technology in business were asked to evaluate the extent of acceptance and enhanced capability of these alternative visuals toward their learning…

Advancing Energy Development in Indian Country (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This fact sheet provides information on the Strategic Technical Assistance Response Team (START) Program, a U.S. Department of Energy Office of Indian Energy Policy and Programs (DOE-IE) initiative to provide technical expertise to support the development of next-generation energy projects in Indian Country.

A Model of Low Grazing Angle Sea Clutter for Coherent Radar Performance Analysis

DTIC Science & Technology

2013-06-01

Navy Communications & Information Warfare Doc. Data Sheet Director General Navy Certification and Safety Doc. Data Sheet Director General Submarine...Abstracts, US 1 Documents Librarian , The Center for Research Libraries, US 1 International Technology and Science Center (ITSC) Library 1 Spare Copies 4

Renewable Energy Project Development Assistance (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This fact sheet provides information on the Tribes selected to receive assistance from the U.S. Department of Energy Office of Indian Energy 2013 Strategic Technical Assistance Response Team (START) Program, which provides technical expertise to support the development of next-generation energy projects on tribal lands.

Research on NC laser combined cutting optimization model of sheet metal parts

NASA Astrophysics Data System (ADS)

Wu, Z. Y.; Zhang, Y. L.; Li, L.; Wu, L. H.; Liu, N. B.

2017-09-01

The optimization problem for NC laser combined cutting of sheet metal parts was taken as the research object in this paper. The problem included two contents: combined packing optimization and combined cutting path optimization. In the problem of combined packing optimization, the method of “genetic algorithm + gravity center NFP + geometric transformation” was used to optimize the packing of sheet metal parts. In the problem of combined cutting path optimization, the mathematical model of cutting path optimization was established based on the parts cutting constraint rules of internal contour priority and cross cutting. The model played an important role in the optimization calculation of NC laser combined cutting.

High-efficiency cell concepts on low-cost silicon sheets

NASA Technical Reports Server (NTRS)

Bell, R. O.; Ravi, K. V.

1985-01-01

The limitations on sheet growth material in terms of the defect structure and minority carrier lifetime are discussed. The effect of various defects on performance are estimated. Given these limitations designs for a sheet growth cell that will make the best of the material characteristics are proposed. Achievement of optimum synergy between base material quality and device processing variables is proposed. A strong coupling exists between material quality and the variables during crystal growth, and device processing variables. Two objectives are outlined: (1) optimization of the coupling for maximum performance at minimal cost; and (2) decoupling of materials from processing by improvement in base material quality to make it less sensitive to processing variables.

PRODUCTION OF SHEET FROM PARTICULATE MATERIAL

DOEpatents

Blainey, A.

1959-05-12

A process is presented for forming coherent sheet material from particulate material such as granular or powdered metal, granular or powdered oxide, slurries, pastes, and plastic mixes which cohere under pressure. The primary object is to avoid the use of expensive and/ or short lived pressing tools, that is, dies and specially profiled rolls, and so to reduce the cost of the product and to prcvide in a simple manner for the making of the product in a variety of shapes or sizes. The sheet material is formed when the particulate material is laterally confined in a boundary material deformable in all lateral directions under axial pressure and then axially compressing the layer of particulate material together with the boundary material.

Glacial dynamics (glaciology)

NASA Technical Reports Server (NTRS)

Whillans, Ian

1991-01-01

Recent results are reviewed from studies of ice dynamics that relate to the objectives of the West Antarctic Ice Sheet initiative. The large amount of knowledge gained is emphasized. The best evidence shows that the ice sheet in West Antarctic is the most rapidly changing ice sheet on earth today. Its rate of change is much faster than most glaciologists had expected and it is changing in a manner much more complex than foreseen. It appears that the changes have two broad causes: a delayed but ongoing response to the termination of the last glaciation about 10,000 years ago; and automatic, internally caused flow adjustments. It is not fully known why the response to the last global termination is so delayed, nor is the operation of internal instabilities understood, and certainly the position has not yet been attained to predict the future course of the evolution of the ice sheet.

Fact Sheet: Best Practices Handbook for the Collection and Use of Solar Energy Applications; Best Practices Handbook for the Collection and Use of Solar Energy Applications (Fact Sheet), Energy Systems Integration (ESI), NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-06-01

This fact sheet presents highlights from the Best Practices Handbook for the Collection and Use of Solar Resource Data for Solar Energy Applications, which provides detailed information about solar resource data and the resulting data products needed for planning each stage of large concentrating solar power systems, from initial site selection to system operations.

A study of the formation and dynamics of the Earth's plasma sheet using ion composition data

NASA Technical Reports Server (NTRS)

Lennartsson, O. W.

1994-01-01

Over two years of data from the Lockheed Plasma Composition Experiment on the ISEE 1 spacecraft, covering ion energies between 100 eV/e and about 16 keV/e, have been analyzed in an attempt to extract new information about three geophysical issues: (1) solar wind penetration of the Earth's magnetic tail; (2) relationship between plasma sheet and tail lobe ion composition; and (3) possible effects of heavy terrestrial ions on plasma sheet stability.

Publications

Cancer.gov

Information about NCI publications including PDQ cancer information for patients and health professionals, patient-education publications, fact sheets, dictionaries, NCI blogs and newsletters and major reports.

Landforms, sediments and dates to constrain rates and style of marine-influenced ice sheet decay; the BRITICE-CHRONO project.

NASA Astrophysics Data System (ADS)

Clark, Chris

2014-05-01

Uncertainty exists regarding the future mass of the Antarctic and Greenland ice sheets and how they will respond to forcings from sea level, and atmospheric and ocean temperatures. If we want to know more about the mechanisms and rate of change of shrinking ice sheets, then why not examine an ice sheet that has fully disappeared and track its retreat through time? If achieved in enough detail such information on ice retreat could be a data-rich playground for improving the next breed of numerical ice sheet models to be used in ice and sea level forecasting. We regard that the last British-Irish Ice Sheet is a good target for this work, on account of its small size, density of information and with its numerous researchers already investigating it. Geomorphological mapping across the British Isles and the surrounding continental shelf has revealed the nature and distribution of glacial landforms. Here we demonstrate how such data have been used to build a pattern of ice margin retreat. The BRITICE-CHRONO consortium of Quaternary scientists and glaciologists, are now working on a project running from 2012 - 2017 to produce an ice sheet wide database of geochronometric dates to constrain and then understand ice margin retreat. This is being achieved by focusing on 8 transects running from the continental shelf edge to a short distance (10s km) onshore and acquiring marine and terrestrial samples for geochronometric dating. The project includes funding for 587 radiocarbon, 140 OSL and 158 TCN samples for surface exposure dating; with sampling accomplished by two research cruises and 16 fieldwork campaigns. Results will reveal the timing and rate of change of ice margin recession for each transect, and combined with existing landform and dating databases, will be used to build an ice sheet-wide empirical reconstruction of retreat. Simulations using two numerical ice sheet models, fitted against the margin data, will help us understand the nature and significance of sea-level rise and ocean/atmosphere forcing on influencing the rate of retreat and ice sheet demise and the effect that bed topography has in controlling this.

Electromagnetic jets from stars and black holes

NASA Astrophysics Data System (ADS)

Gralla, Samuel E.; Lupsasca, Alexandru; Rodriguez, Maria J.

2016-02-01

We present analytic force-free solutions modeling rotating stars and black holes immersed in the magnetic field of a thin disk that terminates at an inner radius. The solutions are exact in flat spacetime and approximate in Kerr spacetime. The compact object produces a conical jet whose properties carry information about its nature. For example, the jet from a star is surrounded by a current sheet, while that of a black hole is smooth. We compute an effective resistance in each case and compare to the canonical values used in circuit models of energy extraction. These solutions illustrate all of the basic features of the Blandford-Znajek process for energy extraction and jet formation in a clean setting.

Becoming Resilient: Disaster Planning and Recovery: NREL Experts Assist Before and After a Disaster (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hotchkiss, E.

This fact sheet provides information on how private industry; federal, state, and local governments; non-profit organizations; and communities can utilize NREL's expertise, tools, and innovations to incorporate energy efficiency and renewable energy into the planning, recovery, and rebuilding stages of disaster.

Food Marketing: Cashier-Checker. Teacher's Guide. Competency Based Curriculum.

ERIC Educational Resources Information Center

Froelich, Larry; And Others

This teacher's guide is designed to accompany the Competency Based Cashier-Checker Curriculum student materials--see note. Contents include a listing of reference materials, tool and equipment lists, copy of the table of contents for student competency sheets, teacher's suggestions, and answer keys for information sheets and exercises.…

49 CFR 260.25 - Additional information for Applicants not having a credit rating.

Code of Federal Regulations, 2010 CFR

2010-10-01

... geographic region, major markets served, major interchange points, and market development plans; (2... application, including: (i) A copy of Applicant's most recent year-end general balance sheet and a copy of Applicant's most recent unaudited general balance sheet; and (ii) Applicant's most recent annual income...

Use of Cognitive Therapy and the Balance Sheet Procedure to Assist Career Decision Making.

ERIC Educational Resources Information Center

O'Hare, Marianne M.

1989-01-01

A balance sheet technique enables counselors to help clients identify and overcome anxiety associated with career decision making. Steps include describing the problem, brainstorming alternatives, listing expected positive and negative outcomes in terms of self and others, seeking information, and choosing alternatives. (SK)

Epilepsy. Fact Sheet = Epilepsia. Hojas Informativas Sobre Discapacidades.

ERIC Educational Resources Information Center

National Information Center for Children and Youth with Disabilities, Washington, DC.

This fact sheet, written in both English and Spanish, provides a definition, information on incidence, typical characteristics, and educational implications of epilepsy. It notes that epilepsy is classified as "other health impaired" under the Individuals with Disabilities Education Act (IDEA) and that children with epilepsy or seizure disorders…

Emotional Disturbance. Fact Sheet = Problemas Emocionales. Hojas Informativas Sobre Discapacidades.

ERIC Educational Resources Information Center

National Information Center for Children and Youth with Disabilities, Washington, DC.

This fact sheet, written in both English and Spanish, provides a definition, information on incidence, typical characteristics, and educational implications of emotional disturbance. The definition is from the Individuals with Disabilities Education Act (IDEA) and incidence in 1999-2000 is reported as about 470,000 children and youth. Educational…

Fact Sheets and Additional Information Regarding the 2012 Decision to Retain the Secondary NAAQS for Nitrogen Dioxide and Sulfur Dioxide

EPA Pesticide Factsheets

On April 3, 2012, EPA sdecided to retain the current secondary national ambient air quality standard (NAAQS) for nitrogen dioxide (NO2) and sulfur dioxide (SO2).This page contains a fact sheet describing that action.

75 FR 43995 - Agency Information Collection Activities: Submission for OMB Review; Comment Request, OMB No...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID: FEMA-2010-0026...; FEMA/EMI Independent Study Course Enrollment and Test Answer Sheet AGENCY: Federal Emergency Management... Course Enrollment and Test Answer Sheet (paper and electronic). SUMMARY: The Federal Emergency Management...

A flexible tactile sensitive sheet using a hetero-core fiber optic sensor

NASA Astrophysics Data System (ADS)

Fujino, S.; Yamazaki, H.; Hosoki, A.; Watanabe, K.

2014-05-01

In this report, we have designed a tactile sensitive sheet based on a hetero-core fiber-optic sensor, which realize an areal sensing by using single sensor potion in one optical fiber line. Recently, flexible and wide-area tactile sensing technology is expected to applied to acquired biological information in living space and robot achieve long-term care services such as welfare and nursing-care and humanoid technology. A hetero-core fiber-optic sensor has several advantages such as thin and flexible transmission line, immunity to EMI. Additionally this sensor is sensitive to moderate bending actions with optical loss changes and is independent of temperature fluctuation. Thus, the hetero-core fiber-optic sensor can be suitable for areal tactile sensing. We measure pressure characteristic of the proposed sensitive sheet by changing the pressure position and pinching characteristic on the surface. The proposed tactile sensitive sheet shows monotonic responses on the whole sensitive sheet surface although different sensitivity by the position is observed at the sensitive sheet surface. Moreover, the tactile sensitive sheet could sufficiently detect the pinching motion. In addition, in order to realize the discrimination between pressure and pinch, we fabricated a doubled-over sensor using a set of tactile sensitive sheets, which has different kinds of silicon robbers as a sensitive sheet surface. In conclusion, the flexible material could be given to the tactile sensation which is attached under proposed sensitive sheet.

Solar Energy Applications for Agriculture. A Curriculum Guide.

ERIC Educational Resources Information Center

Nebraska Univ., Lincoln. Dept. of Agricultural Education.

This curriculum guide contains five units for a course in solar energy applications for vocational agriculture. Each unit is organized in a format containing some or all of the following materials: unit objective, specific objectives, suggested instructor and student activities, list of instructional materials, assignment sheets, answers to…

Principles of Technology, Units 1-7. Curriculum Guide.

ERIC Educational Resources Information Center

Campbell, Robert, Comp.

This Idaho secondary education curriculum guide provides lists of tasks, performance objectives, and enabling objectives for instruction intended to impart entry-level employment skills in industrial technology. The first list is a general job competencies task profile, followed by a sheet on which teachers can evaluate students' general job…

Film holder for radiographing tubing

DOEpatents

Davis, Earl V.; Foster, Billy E.

1976-01-01

A film cassette is provided which may be easily placed about tubing or piping and readily held in place while radiographic inspection is performed. A pair of precurved light-impervious semi-rigid plastic sheets, hinged at one edge, enclose sheet film together with any metallic foils or screens. Other edges are made light-tight with removable caps, and the entire unit is held securely about the object to be radiographed with a releasable fastener such as a strip of Velcro.

A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1982-01-01

Restructuring research objectives from a technical readiness demonstration program to an investigation of high risk, high payoff activities associated with producing photovoltaic modules using non-CZ sheet material is reported. Deletion of the module frame in favor of a frameless design, and modification in cell series parallel electrical interconnect configuration are reviewed. A baseline process sequence was identified for the fabrication of modules using the selected dendritic web sheet material, and economic evaluations of the sequence were completed.

IGLOO: an Intermediate Complexity Framework to Simulate Greenland Ice-Ocean Interactions

NASA Astrophysics Data System (ADS)

Perrette, M.; Calov, R.; Beckmann, J.; Alexander, D.; Beyer, S.; Ganopolski, A.

2017-12-01

The Greenland ice-sheet is a major contributor to current and future sea level rise associated to climate warming. It is widely believed that over a century time scale, surface melting is the main driver of Greenland ice volume change, in contrast to melting by the ocean. It is due to relatively warmer air and less ice area exposed to melting by ocean water compared to Antarctica, its southern, larger twin. Yet most modeling studies do not have adequate grid resolution to represent fine-scale outlet glaciers and fjords at the margin of the ice sheet, where ice-ocean interaction occurs, and must use rather crude parameterizations to represent this process. Additionally, the ice-sheet area grounded below sea level has been reassessed upwards in the most recent estimates of bedrock elevation under the Greenland ice sheet, revealing a larger potential for marine-mediated melting than previously thought. In this work, we develop an original approach to estimate potential Greenland ice sheet contribution to sea level rise from ocean melting, in an intermediate complexity framework, IGLOO. We use a medium-resolution (5km) ice-sheet model coupled interactively to a number of 1-D flowline models for the individual outlet glaciers. We propose a semi-objective methodology to derive 1-D glacier geometries from 2-D Greenland datasets, as well as preliminary results of coupled ice-sheet-glaciers simulations with IGLOO.

Nonlinear distortion of thin liquid sheets

NASA Astrophysics Data System (ADS)

Mehring, Carsten Ralf

Thin planar, annular and conical liquid sheets or films are analyzed, in a unified manner, by means of a reduced- dimension approach providing governing equations for the nonlinear motion of planar and swirling annular thin inviscid and incompressible liquid sheets in zero gravity and with axial disturbances only. Temporal analyses of periodically disturbed infinite sheets are considered, as well as spatial analyses of semi-infinite sheets modulated at the nozzle exit. Results on planar and swirling annular or conical sheets are presented for a zero density ambient gas. Here, conical sheets are obtained in the nearfield of the nozzle exit by considering sheets or films with swirl in excess of that needed to stabilize the discharging stream in its annular configuration. For nonswirling annular sheets a spatially and/or temporally constant gas-core pressure is assumed. A model extension considering the influence of aerodynamic effects on planar sheets is proposed. For planar and annular sheets, linear analyses of the pure initial- and pure boundary-value problem provide insight into the propagation characteristics of dilational and sinuous waves, the (linear) coupling between both wave modes, the stability limits for the annular configuration, as well as the appearance of particular waves on semi-infinite modulated sheets downstream from the nozzle exit. Nonlinear steady-state solutions for the conical configuration (without modulation) are illustrated. Comparison between nonlinear and linear numerical and linear analytical solutions for temporally or spatially developing sheets provides detailed information on the nonlinear distortion characteristics including nonlinear wave propagation and mode-coupling for all the considered geometric configurations and for a variety of parameter configurations. Sensitivity studies on the influence of Weber number, modulation frequency, annular radius, forcing amplitude and sheet divergence on breakup or collapse length and times are reported for modulated semi-infinite annular and conical sheets. Comparisons between the different geometric configurations are made. For periodically disturbed planar sheets, accuracy of the employed reduced-dimension approach is demonstrated by comparison with more accurate two-dimensional vortex dynamics simulations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report summarizes significant FY93 programmatic information and accomplishments relevant to the individual activities within the Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation (RDDT&E). A brief discussion of the mission of the Office of Environmental Restoration and Waste Management (EM) and the Office of Technology Development is presented. An overview is presented of the major problem areas confronting DOE. These problem areas include: groundwater and soils cleanup; waste retrieval and processing; and pollution prevention. The organizational elements within EM are highlighted. An EM-50 Funding Summary for FY92 and FY93 is also provided. RDDT&E programs aremore » discussed and their key problem areas are summarized. Three salient program-formulating concepts are explained. They are: Integrated Demonstrations, Integrated Programs, and the technology window of opportunity. Detailed information for each of the programs within RDDT&E is presented and includes a fact sheet, a list of technical task plans and an accomplishments and objectives section.« less

New continuous recording procedure of holographic information on transient phenomena

NASA Astrophysics Data System (ADS)

Nagayama, Kunihito; Nishihara, H. Keith; Murakami, Terutoshi

1992-09-01

A new method for continuous recording of holographic information, 'streak holography,' is proposed. This kind of record can be useful for velocity and acceleration measurement as well as for observing a moving object whose trajectory cannot be predicted in advance. A very high speed camera system has been designed and constructed for streak holography. A ring-shaped 100-mm-diam film has been cut out from the high-resolution sheet film and mounted on a thin duralmin disk, which has been driven to rotate directly by an air-turbine spindle. Attainable streak velocity is 0.3 mm/microsecond(s) . A direct film drive mechanism makes it possible to use a relay lens system of extremely small f number. The feasibility of the camera system has been demonstrated by observing several transient events, such as the forced oscillation of a wire and the free fall of small glass particles, using an argon-ion laser as a light source.

Cross-sensory reference frame transfer in spatial memory: the case of proprioceptive learning.

PubMed

Avraamides, Marios N; Sarrou, Mikaella; Kelly, Jonathan W

2014-04-01

In three experiments, we investigated whether the information available to visual perception prior to encoding the locations of objects in a path through proprioception would influence the reference direction from which the spatial memory was formed. Participants walked a path whose orientation was misaligned to the walls of the enclosing room and to the square sheet that covered the path prior to learning (Exp. 1) and, in addition, to the intrinsic structure of a layout studied visually prior to walking the path and to the orientation of stripes drawn on the floor (Exps. 2 and 3). Despite the availability of prior visual information, participants constructed spatial memories that were aligned with the canonical axes of the path, as opposed to the reference directions primed by visual experience. The results are discussed in the context of previous studies documenting transfer of reference frames within and across perceptual modalities.

BRITICE-CHRONO: Constraining rates and style of marine-influenced ice sheet decay to provide a data-rich playground for ice sheet modellers

NASA Astrophysics Data System (ADS)

Clark, Chris

2014-05-01

Uncertainty exists regarding the fate of the Antarctic and Greenland ice sheets and how they will respond to forcings from sea level and atmospheric and ocean temperatures. If we want to know more about the mechanisms and rate of change of shrinking ice sheets, then why not examine an ice sheet that has fully disappeared and track its retreat through time? If achieved in enough detail such information could become a data-rich playground for improving the next breed of numerical ice sheet models to be used in ice and sea level forecasting. We regard that the last British-Irish Ice Sheet is a good target for this work, on account of its small size, density of information and with its numerous researchers already investigating it. BRITICE-CHRONO is a large (>45 researchers) NERC-funded consortium project comprising Quaternary scientists and glaciologists who will search the seafloor around Britain and Ireland and parts of the landmass in order to find and extract samples of sand, rock and organic matter that can be dated (OSL; Cosmogenic; 14C) to reveal the timing and rate of change of the collapsing British-Irish Ice Sheet. The purpose is to produce a high resolution dataset on the demise on an ice sheet - from the continental shelf edge and across the marine to terrestrial transition. Some 800 new date assessments will be added to those that already exist. This poster reports on the hypotheses that underpin the work. Data on retreat will be collected by focusing on 8 transects running from the continental shelf edge to a short distance (10s km) onshore and acquiring marine and terrestrial samples for geochronometric dating. The project includes funding for 587 radiocarbon, 140 OSL and 158 TCN samples for surface exposure dating; with sampling accomplished by two research cruises and 16 fieldwork campaigns. Results will reveal the timing and rate of change of ice margin recession for each transect, and combined with existing landform and dating databases, will be used to build an ice sheet-wide empirical reconstruction of retreat incorporating Bayesian analysis to assess uncertainty. We invite and encourage ice sheet modellers to use our data for modelling experiments and in particular to explore the role of bed topography in modulating ice retreat.

Prospective audit of postoperative instructions to patients undergoing root canal treatment in the DDUH and re-audit following introduction of a written patient information sheet.

PubMed

Moorthy, A; Alkadhimi, A F; Stassen, Leo F; Duncan, H F

2016-01-01

Concerns were expressed that postoperative written instructions following endodontic treatment are not available in the Dublin Dental University Hospital. Data was collected in three phases: retrospective analysis of clinical notes for evidence of the delivery of postoperative instructions; a randomly distributed questionnaire to patients undergoing root canal treatment prior to the introduction of a written postoperative advice sheet; and, another survey following introduction of the advice sheet. Some 56% of patients' charts documented that postoperative advice was given. Analysis of phase two revealed that patients were not consistently informed of any key postoperative messages. In phase 3 analysis, the proposed benchmarks were met in four out of six categories. Postoperative advice after root canal treatment in the DDUH is both poorly recorded and inconsistently delivered. A combination of oral postoperative instructions and written postoperative advice provided the most effective delivery of patient information.

Hand-Drawn 'Weekly Information Sheets' Focus Teaching, Engage Students, and Improve Communication

NASA Astrophysics Data System (ADS)

Pound, K. S.

2016-12-01

Hand-drawn and lettered `Weekly Information Sheets' (WIS) were created on a weekly basis for an upper-level Sedimentology & Stratigraphy class. Use of these sheets resulted in improved work quality, attention to detail, communication skills, and overall engagement. The sheets were modeled on the work of Lynda Barry (https://www.drawnandquarterly.com/syllabus), and included a series of repeated elements: goofy/absurd newspaper clippings, marginally pertinent cartoon(s), a summary of the weeks activities / goals and lectures, as well as cartoon cat, mouse and penguin drawings with innane comments, quotes and general class reminders. The pedagogical aims for these weekly sheets were multifold. First, they were designed so that students could see the time and care I put in to the sheet - my hope was that this would show the time and care I expected them to put in to their work. Second, I wanted to create something students would take the time to read - despite this being a 400-level class, students are rarely diligent about reading a typewritten handout. Third, I wanted to have a vehicle for engaging them in the larger world, including ethical or moral dilemmas. Fourth, I wanted the students to reflectively consider the nature of communication in science. Finally, I wanted a mechanism to focus my thoughts on the teaching and learning for the upcoming week that went beyond simply reviewing my notes and activities. Student response to the WIS was positive; they read them, used them for organizing their class notes and exam review. Students arrived early for class on Mondays for the WIS - although I needed to give them time to read the sheet. Comparison with previous course offerings shows improvements in student communication skills (written reports, poster presentation) and overall achievement.

Demonstration of Sparse Signal Reconstruction for Radar Imaging of Ice Sheets

NASA Astrophysics Data System (ADS)

Heister, Anton; Scheiber, Rolf

2017-04-01

Conventional processing of ice-sounder data produces 2-D images of the ice sheet and bed, where the two dimensions are along-track and depth, while the across-track direction is fixed to nadir. The 2-D images contain information about the topography and radar reflectivity of the ice sheet's surface, bed, and internal layers in the along-track direction. Having multiple antenna phase centers in the across-track direction enables the production of 3-D images of the ice sheet and bed. Compared to conventional 2-D images, these contain additional information about the surface and bed topography, and orientation of the internal layers over a swath in the across-track direction. We apply a 3-D SAR tomographic ice-sounding method based on sparse signal reconstruction [1] to the data collected by Center for Remote Sensing of Ice Sheets (CReSIS) in 2008 in Greenland [2] using their multichannel coherent radar depth sounder (MCoRDS). The MCoRDS data have 16 effective phase centers which allows us to better understand the performance of the method. Lastly we offer sparsity improvement by including wavelet dictionaries into the reconstruction.The results show improved scene feature resolvability in across-track direction compared to MVDR beamformer. References: [1] A. Heister, R. Scheiber, "First Analysis of Sparse Signal Reconstruction for Radar Imaging of Ice Sheets". In: Proceedings of EUSAR, pp. 788-791, June 2016. [2] X. Wu, K. C. Jezek, E. Rodriguez, S. Gogineni, F. Rodriguez-Morales, and A. Freeman, "Ice sheet bed mapping with airborne SAR tomography". IEEE Transactions on Geoscience and Remote Sensing, vol. 49, no. 10 Part 1, pp. 3791-3802, 2011.

The geomorphic signature of past ice sheets in the marine record

NASA Astrophysics Data System (ADS)

Dowdeswell, J. A.

2016-12-01

The deglaciation of high-latitude continental shelves since the Last Glacial Maximum has revealed suites of subglacial and ice-contact landforms that have remained well-preserved beneath tens to hundreds of metres of water. Once ice has retreated, sedimentation is generally low on polar shelves during interglacials and the submarine landforms have not, therefore, been buried by subsequent sedimentation. By contrast, the beds of modern ice sheets are hidden by several thousand metres of ice, which is much more difficult than water to penetrate using geophysical methods. These submarine glacial landforms provide insights into past ice-sheet form and flow, and information on the processes that have taken place beneath former ice sheets. Examples will be shown of streamlined subglacial landforms that indicate the distribution and dimensions of former ice streams on high-latitde continental margins. Distinctive landform assemblages characterise ice stream and inter-ice stream areas. Landforms, including subglacially formed channel systems in inner- and mid-shelf areas, and the lack of them on sedimentary outer shelves, allow inferences to be made about subglacial hydrology. The distribution of grounding-zone wedges and other transverse moraine ridges also provides evidence on the nature of ice-sheet retreat - whether by rapid collapse, episodic retreat or by the slow retreat of grounded ice. Such information can be used to test the predictive capability of ice-sheet numerical models. These marine geophysical and geological observations of submarine glacial landforms enhance our understanding of the form and flow of past ice masses at scales ranging from ice sheets (1000s of km in flow-line and margin length), through ice streams (100s of km long), to surge-type glaciers (10s of km long).

Conversion of finished leather waste incorporated with plant fibers into value added consumer products - An effort to minimize solid waste in Ethiopia.

PubMed

Teklay, A; Gebeyehu, G; Getachew, T; Yaynshet, T; Sastry, T P

2017-10-01

Presently, the leftovers from leather product industries are discarded as waste in Ethiopia. The objective of the present study was therefore, to prepare composite sheets by incorporating various plant fibers like enset (Ensete ventricosum), hibiscus (Hibiscus cannabinus), jute (Corchorus trilocularis L.), palm (Phoenix dactylifera) and sisal (Agave sisal) in various proportions into the leather waste. Resin binder (RB) and natural rubber latex (NRL) were used as binding agents for the preparation of the composite sheets. The composite sheets prepared were characterized for their physicochemical properties (tensile strength, elongation at break, stitch tear strength, water absorption, water desorption and flexing strength). Composite sheets prepared using RB having 10% hibiscus, 20% palm and 40% sisal fibers showed better mechanical properties than their respective controls. In composite sheets prepared using NRL having 30% jute fiber exhibited better mechanical properties than its control. Most of the plant fibers used in this study played a role in increasing the performance of the sheets. However, as seen from the results, the contribution of these plant fibers on performance of the composite sheets prepared is dependent on the ratio used and the nature of binder. The SEM studies have exhibited the composite nature of the sheets and FTIR studies have shown the functional groups of collagen protein, cellulose and binders. The prepared sheets were used as raw materials for preparation of items like stiff hand bags, ladies' purse, keychain, chappal upper, wallet, wall cover, mouse pad and other interior decorating products. By preparing such value added products, we can reduce solid waste; minimize environmental pollution and thereby securing environmental sustainability. Copyright © 2017 Elsevier Ltd. All rights reserved.

Illinois Early Learning Project Tip Sheets: Parenting and Family Life.

ERIC Educational Resources Information Center

2003

The Illinois Early Learning Project (IEL) is funded by the Illinois State Board of Education to provide information resources on early learning and training related to implementing the Illinois Early Learning Standards for parents and for early childhood personnel in all settings. The IEL tip sheets offer suggestions to parents and early childhood…

Agricultural Science I. Supplementary Units. Instructor Information.

ERIC Educational Resources Information Center

Martin, Donna; And Others

These supplementary units are designed to help students with special needs learn and apply agricultural skills in the areas of animal breeding, animal nutrition, leadership, and power tools. Specific competencies are listed as study questions at the beginning of each of the 10 self-paced and self-contained units. Skill sheets, activity sheets, and…

Important Issues in Rural Education: A Collection of ERIC/CRESS Fact Sheets and Mini Reviews.

ERIC Educational Resources Information Center

Seager, D. D.; And Others

The two mini reviews and two fact sheets contained in this collection synthesize basic information regarding four issues in rural education: special education, transportation, early childhood education, and reading achievement. Solutions to the special education problems of child identification, parent involvement, delivery of special education…

Deferred Maintenance Needs of California Public Higher Education. Fact Sheet 05-05

ERIC Educational Resources Information Center

California Postsecondary Education Commission, 2005

2005-01-01

The California Postsecondary Education Commission estimated in the year 2000 that the State would need to spend approximately $1.5 billion annually to maintain and expand public higher education facilities to meet student demand. This fact sheet updates information about the dollar amount of maintenance projects that are currently backlogged or…

Illinois Early Learning Project Tip Sheets: Physical Development and Health.

ERIC Educational Resources Information Center

2003

The Illinois Early Learning Project (IEL) is funded by the Illinois State Board of Education to provide information resources on early learning and training related to implementing the Illinois Early Learning Standards for parents and for early childhood personnel in all settings. The IEL tip sheets offer suggestions to parents and early childhood…

Silicon sheet growth development for the large area silicon sheet task of the low cost solar array project. Quantitative analysis of defects in silicon

NASA Technical Reports Server (NTRS)

Natesh, R.

1978-01-01

The various steps involved in obtaining quantitative information of structural defects in crystalline silicon samples are described. Procedures discussed include: (1) chemical polishing; (2) chemical etching; and (3) automated image analysis of samples on the QTM 720 System.

75 FR 70205 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From Indonesia: Antidumping Duty Order... Indonesia. DATES: Effective Date: November 17, 2010. FOR FURTHER INFORMATION CONTACT: Gemal Brangman or... duty investigation of certain coated paper from Indonesia. See Certain Coated Paper Suitable for High...

17 CFR 210.8-05 - Pro forma financial information.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., and should include the following: (1) If the transaction was consummated during the most recent fiscal... transaction has occurred or is probable after the date of the most recent balance sheet required by § 210.8-02... recent balance sheet. For a purchase, pro forma statements of income reflecting the combined operations...

17 CFR 210.8-05 - Pro forma financial information.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., and should include the following: (1) If the transaction was consummated during the most recent fiscal... transaction has occurred or is probable after the date of the most recent balance sheet required by § 210.8-02... recent balance sheet. For a purchase, pro forma statements of income reflecting the combined operations...

17 CFR 210.8-05 - Pro forma financial information.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., and should include the following: (1) If the transaction was consummated during the most recent fiscal... transaction has occurred or is probable after the date of the most recent balance sheet required by § 210.8-02... recent balance sheet. For a purchase, pro forma statements of income reflecting the combined operations...

Communicating the balance sheet in breast cancer screening.

PubMed

Giordano, Livia; Cogo, Carla; Patnick, Julietta; Paci, Eugenio

2012-01-01

Despite the difficulties, there is a moral responsibility to provide the public with the best estimates of benefits and harms of breast cancer screening. In this paper we review the issues in communication of benefits and harms of medical interventions and discuss these in terms of the principles of the balance sheet proposed in this supplement. The balance sheet can be seen as a tool to convey estimates based on the best available evidence and addressed to a readership wider than just potential screening participants. It reflects a re-assessment of screening efficacy, showing again that screening is effective and brings more benefits than harms. It can be viewed as an opportunity to re-affirm some basic principles of good evidence-based communication. Further research is needed to improve communication strategy, to assess the impact of this communication on women's awareness and to evaluate its utility in the informed decision-making process. The balance sheet could be a starting point for a broader vision of informed decision-making in screening, which should also recognize the role played by 'non-numerical' factors on women's choice of participating in breast cancer screening.

Imaging galectin-3 dependent endocytosis with lattice light-sheet microscopy

NASA Astrophysics Data System (ADS)

Baek, Jongho; Lou, Jieqiong; Coelho, Simao; Lim, Yean Jin; Seidlitz, Silvia; Nicovich, Philip R.; Wunder, Christian; Johannes, Ludger; Gaus, Katharina

2017-04-01

Lattice light-sheet (LLS) microscopy provides ultrathin light sheets of a two-dimensional optical lattice that allows us imaging three-dimensional (3D) objects for hundreds of time points at sub-second intervals and at or below the diffraction limit. Galectin-3 (Gal3), a carbohydrate-binding protein, triggers glycosphingolipid (GSL)-dependent biogenesis of morphologically distinct endocytic vesicles that are cargo specific and clathrin independent. In this study, we apply LLS microscopy to study the dynamics of Gal3 dependent endocytosis in live T cells. This will allow us to observe Gal3-mediated endocytosis at high temporal and excellent 3D spatial resolution, which may shed light on our understanding of the mechanism and physiological function of Gal3-induced endocytosis.

Research on cutting path optimization of sheet metal parts based on ant colony algorithm

NASA Astrophysics Data System (ADS)

Wu, Z. Y.; Ling, H.; Li, L.; Wu, L. H.; Liu, N. B.

2017-09-01

In view of the disadvantages of the current cutting path optimization methods of sheet metal parts, a new method based on ant colony algorithm was proposed in this paper. The cutting path optimization problem of sheet metal parts was taken as the research object. The essence and optimization goal of the optimization problem were presented. The traditional serial cutting constraint rule was improved. The cutting constraint rule with cross cutting was proposed. The contour lines of parts were discretized and the mathematical model of cutting path optimization was established. Thus the problem was converted into the selection problem of contour lines of parts. Ant colony algorithm was used to solve the problem. The principle and steps of the algorithm were analyzed.

Assessment of present state-of-the-art sawing technology of large diameter ingots for solar sheet material

NASA Technical Reports Server (NTRS)

Yoo, H. I.

1977-01-01

The objective of this program is to assess the present state-of-the-art sawing technology of large diameter silicon ingots (3 inch and 4 inch diameter) for solar sheet materials. During this period, work has progressed in three areas: (1) slicing of the ingots with the multiblade slurry saw and the I.D. saw, (2) characterization of the sliced wafers, and (3) analysis of direct labor, expendable material costs, and wafer productivity.

A guide to federal-aid programs and projects

DOT National Transportation Integrated Search

1999-05-01

This guide provides basic information about Federal-aid programs, projects, and other program characteristics. The information sheets contained in the guide provide fiscal information, statutory and regulatory references, general eligibility and back...

Satellite remote sensing over ice

NASA Technical Reports Server (NTRS)

Thomas, R. H.

1984-01-01

Satellite remote sensing provides unique opportunities for observing ice-covered terrain. Passive-microwave data give information on snow extent on land, sea-ice extent and type, and zones of summer melting on the polar ice sheets, with the potential for estimating snow-accumulation rates on these ice sheets. All weather, high-resolution imagery of sea ice is obtained using synthetic aperture radars, and ice-movement vectors can be deduced by comparing sequential images of the same region. Radar-altimetry data provide highly detailed information on ice-sheet topography, with the potential for deducing thickening/thinning rates from repeat surveys. The coastline of Antarctica can be mapped accurately using altimetry data, and the size and spatial distribution of icebergs can be monitored. Altimetry data also distinguish open ocean from pack ice and they give an indication of sea-ice characteristics.

Satellite remote sensing over ice

NASA Technical Reports Server (NTRS)

Thomas, R. H.

1986-01-01

Satellite remote sensing provides unique opportunities for observing ice-covered terrain. Passive-microwave data give information on snow extent on land, sea-ice extent and type, and zones of summer melting on the polar ice sheets, with the potential for estimating snow-accumulation rates on these ice sheets. All weather, high-resolution imagery of sea ice is obtained using synthetic aperture radars, and ice-movement vectors can be deduced by comparing sequential images of the same region. Radar-altimetry data provide highly detailed information on ice-sheet topography, with the potential for deducing thickening/thinning rates from repeat surveys. The coastline of Antarctica can be mapped accurately using altimetry data, and the size and spatial distribution of icebergs can be monitored. Altimetry data also distinguish open ocean from pack ice and they give an indication of sea-ice characteristics.

Ardnamurchan 3D cone-sheet architecture explained by a single elongate magma chamber

PubMed Central

Burchardt, Steffi; Troll, Valentin R.; Mathieu, Lucie; Emeleus, Henry C.; Donaldson, Colin H.

2013-01-01

The Palaeogene Ardnamurchan central igneous complex, NW Scotland, was a defining place for the development of the classic concepts of cone-sheet and ring-dyke emplacement and has thus fundamentally influenced our thinking on subvolcanic structures. We have used the available structural information on Ardnamurchan to project the underlying three-dimensional (3D) cone-sheet structure. Here we show that a single elongate magma chamber likely acted as the source of the cone-sheet swarm(s) instead of the traditionally accepted model of three successive centres. This proposal is supported by the ridge-like morphology of the Ardnamurchan volcano and is consistent with the depth and elongation of the gravity anomaly underlying the peninsula. Our model challenges the traditional model of cone-sheet emplacement at Ardnamurchan that involves successive but independent centres in favour of a more dynamical one that involves a single, but elongate and progressively evolving magma chamber system. PMID:24100542

Using the Global Burden of Disease study to assist development of nation-specific fact sheets to promote prevention and control of hypertension and reduction in dietary salt: a resource from the World Hypertension League.

PubMed

Campbell, Norm R C; Lackland, Daniel T; Lisheng, Liu; Niebylski, Mark L; Nilsson, Peter M; Zhang, Xin-Hua

2015-03-01

Increased blood pressure and high dietary salt are leading risks for death and disability globally. Reducing the burden of both health risks are United Nations' targets for reducing noncommunicable disease. Nongovernmental organizations and individuals can assist by ensuring widespread dissemination of the best available facts and recommended interventions for both health risks. Simple but impactful fact sheets can be useful for informing the public, healthcare professionals, and policy makers. The World Hypertension League has developed fact sheets on dietary salt and hypertension but in many circumstances the greatest impact would be obtained from national-level fact sheets. This manuscript provides instructions and a template for developing fact sheets based on the Global Burden of Disease study and national survey data. ©2015 Wiley Periodicals, Inc.

Ardnamurchan 3D cone-sheet architecture explained by a single elongate magma chamber.

PubMed

Burchardt, Steffi; Troll, Valentin R; Mathieu, Lucie; Emeleus, Henry C; Donaldson, Colin H

2013-10-08

The Palaeogene Ardnamurchan central igneous complex, NW Scotland, was a defining place for the development of the classic concepts of cone-sheet and ring-dyke emplacement and has thus fundamentally influenced our thinking on subvolcanic structures. We have used the available structural information on Ardnamurchan to project the underlying three-dimensional (3D) cone-sheet structure. Here we show that a single elongate magma chamber likely acted as the source of the cone-sheet swarm(s) instead of the traditionally accepted model of three successive centres. This proposal is supported by the ridge-like morphology of the Ardnamurchan volcano and is consistent with the depth and elongation of the gravity anomaly underlying the peninsula. Our model challenges the traditional model of cone-sheet emplacement at Ardnamurchan that involves successive but independent centres in favour of a more dynamical one that involves a single, but elongate and progressively evolving magma chamber system.

Fingerprinting of music scores

NASA Astrophysics Data System (ADS)

Irons, Jonathan; Schmucker, Martin

2004-06-01

Publishers of sheet music are generally reluctant in distributing their content via the Internet. Although online sheet music distribution's advantages are numerous the potential risk of Intellectual Property Rights (IPR) infringement, e.g. illegal online distributions, disables any innovation propensity. While active protection techniques only deter external risk factors, additional technology is necessary to adequately treat further risk factors. For several media types including music scores watermarking technology has been developed, which ebeds information in data by suitable data modifications. Furthermore, fingerprinting or perceptual hasing methods have been developed and are being applied especially for audio. These methods allow the identification of content without prior modifications. In this article we motivate the development of watermarking and fingerprinting technologies for sheet music. Outgoing from potential limitations of watermarking methods we explain why fingerprinting methods are important for sheet music and address potential applications. Finally we introduce a condept for fingerprinting of sheet music.

Tocilizumab: therapy and safety management.

PubMed

Pham, Thao; Claudepierre, Pascal; Constantin, Arnaud; de Bandt, Michel; Fautrel, Bruno; Gossec, Laure; Gottenberg, Jacques-Eric; Goupille, Philippe; Guillaume, Séverine; Hachulla, Eric; Masson, Charles; Morel, Jacques; Puéchal, Xavier; Saraux, Alain; Schaeverbeke, Thierry; Wendling, Daniel; Bruckert, Eric; Pol, Stanislas; Mariette, Xavier; Sibilia, Jean

2010-06-01

To develop fact sheets about tocilizumab, in order to assist physicians in the management of patients with inflammatory joint disease. 1. selection by a committee of rheumatology experts of the main topics of interest for which fact sheets were desirable; 2. identification and review of publications relevant to each topic; 3. development of fact sheets based on three levels of evidence: evidence-based medicine, official recommendations, and expert opinion. The 20 experts were rheumatologists and invited specialists in other fields, and they had extensive experience with the management of RA. They were members of the CRI (Club Rhumatismes et Inflammation), a section of the Société Francaise de Rhumatologie. Each fact sheet was revised by several. experts and the overall process was coordinated by three experts. Several topics of major interest were selected: contraindications of tocilizumab; the management of adverse effects and concomitant diseases that may develop during tocilizumab therapy; and the management of everyday situations such as pregnancy, surgery, and immunizations. After a review of the literature and discussions among experts, a consensus was developed about the content of the fact sheets presented here. These fact sheets focus on several points: Several topics of major interest were selected: contraindications of tocilizumab; the management of adverse effects and concomitant diseases that may develop during tocilizumab therapy; and the management of everyday situations such as pregnancy, surgery, and immunizations. After a review of the literature and discussions among experts, a consensus was developed about the content of the fact sheets presented here. These fact sheets focus on several points: 1. in RA, initiation and monitoring of tocilizumab therapy, management of patients with specific past histories, and specific clinical situations such as pregnancy; 2. diseases other than RA, such as juvenile idiopathic arthritis; 3. models of letters for informing the rheumatologist and general practitioner; 4. and patient information. These tocilizumab fact sheets built on evidence-based medicine and expert opinion will serve as a practical tool for assisting physicians who manage patients on tocilizumab therapy. They will be available continuously at www.cri-net.com and updated at appropriate intervals. Copyright (c) 2010 Elsevier Masson SAS. All rights reserved.

Generation of light-sheet at the end of multimode fibre (Conference Presentation)

NASA Astrophysics Data System (ADS)

Plöschner, Martin; Kollárová, Véra; Dostál, Zbyněk.; Nylk, Jonathan; Barton-Owen, Thomas; Ferrier, David E. K.; Chmelik, Radim; Dholakia, Kishan; Cizmár, TomáÅ.¡

2017-02-01

Light-sheet fluorescence microscopy is quickly becoming one of the cornerstone imaging techniques in biology as it provides rapid, three-dimensional sectioning of specimens at minimal levels of phototoxicity. It is very appealing to bring this unique combination of imaging properties into an endoscopic setting and be able to perform optical sectioning deep in tissues. Current endoscopic approaches for delivery of light-sheet illumination are based on single-mode optical fibre terminated by cylindrical gradient index lens. Such configuration generates a light-sheet plane that is axially fixed and a mechanical movement of either the sample or the endoscope is required to acquire three-dimensional information about the sample. Furthermore, the axial resolution of this technique is limited to 5um. The delivery of the light-sheet through the multimode fibre provides better axial resolution limited only by its numerical aperture, the light-sheet is scanned holographically without any mechanical movement, and multiple advanced light-sheet imaging modalities, such as Bessel and structured illumination Bessel beam, are intrinsically supported by the system due to the cylindrical symmetry of the fibre. We discuss the holographic techniques for generation of multiple light-sheet types and demonstrate the imaging on a sample of fluorescent beads fixed in agarose gel, as well as on a biological sample of Spirobranchus Lamarcki.

A dynamical classification of the cosmic web

NASA Astrophysics Data System (ADS)

Forero-Romero, J. E.; Hoffman, Y.; Gottlöber, S.; Klypin, A.; Yepes, G.

2009-07-01

In this paper, we propose a new dynamical classification of the cosmic web. Each point in space is classified in one of four possible web types: voids, sheets, filaments and knots. The classification is based on the evaluation of the deformation tensor (i.e. the Hessian of the gravitational potential) on a grid. The classification is based on counting the number of eigenvalues above a certain threshold, λth, at each grid point, where the case of zero, one, two or three such eigenvalues corresponds to void, sheet, filament or a knot grid point. The collection of neighbouring grid points, friends of friends, of the same web type constitutes voids, sheets, filaments and knots as extended web objects. A simple dynamical consideration of the emergence of the web suggests that the threshold should not be null, as in previous implementations of the algorithm. A detailed dynamical analysis would have found different threshold values for the collapse of sheets, filaments and knots. Short of such an analysis a phenomenological approach has been opted for, looking for a single threshold to be determined by analysing numerical simulations. Our cosmic web classification has been applied and tested against a suite of large (dark matter only) cosmological N-body simulations. In particular, the dependence of the volume and mass filling fractions on λth and on the resolution has been calculated for the four web types. We also study the percolation properties of voids and filaments. Our main findings are as follows. (i) Already at λth = 0.1 the resulting web classification reproduces the visual impression of the cosmic web. (ii) Between 0.2 <~ λth <~ 0.4, a system of percolated voids coexists with a net of interconnected filaments. This suggests a reasonable choice for λth as the parameter that defines the cosmic web. (iii) The dynamical nature of the suggested classification provides a robust framework for incorporating environmental information into galaxy formation models, and in particular to semi-analytical models.

The Effects of Truth Bias on Artifact-User Relationships: An Investigation of Factors for Improving Deception Detection in Artifact Produced Information

DTIC Science & Technology

1998-08-07

Scenarios 124 APPENDIX B - Information Manipulation Descriptions 132 vi APPENDIX C - PC-III Screens 146 APPENDIX D - Discrepancy Reporting Sheet 162...in Figure 3-2. • A rtifact Truth Bias D e c e p tio n D ete ctio n A bility t Figure 3-2 - Artifact Truth Bias and Deception Detection...discrepancy recording sheet is provided in Appendix D . For each to the courses, a series of data manipulations was incorporated into the database

Simulated and Real Sheet-of-Light 3D Object Scanning Using a-Si:H Thin Film PSD Arrays.

PubMed

Contreras, Javier; Tornero, Josep; Ferreira, Isabel; Martins, Rodrigo; Gomes, Luis; Fortunato, Elvira

2015-11-30

A MATLAB/SIMULINK software simulation model (structure and component blocks) has been constructed in order to view and analyze the potential of the PSD (Position Sensitive Detector) array concept technology before it is further expanded or developed. This simulation allows changing most of its parameters, such as the number of elements in the PSD array, the direction of vision, the viewing/scanning angle, the object rotation, translation, sample/scan/simulation time, etc. In addition, results show for the first time the possibility of scanning an object in 3D when using an a-Si:H thin film 128 PSD array sensor and hardware/software system. Moreover, this sensor technology is able to perform these scans and render 3D objects at high speeds and high resolutions when using a sheet-of-light laser within a triangulation platform. As shown by the simulation, a substantial enhancement in 3D object profile image quality and realism can be achieved by increasing the number of elements of the PSD array sensor as well as by achieving an optimal position response from the sensor since clearly the definition of the 3D object profile depends on the correct and accurate position response of each detector as well as on the size of the PSD array.

Tip Sheets

Science.gov Websites

United States Census Bureau Topics Population Latest Information Age and Sex Ancestry Children Mobility Population Estimates Population Projections Race Veterans Economy Latest Information Portal Other Economic Programs Business Latest Information Business Characteristics Classification Codes

Ice-sheet contributions to future sea-level change.

PubMed

Gregory, J M; Huybrechts, P

2006-07-15

Accurate simulation of ice-sheet surface mass balance requires higher spatial resolution than is afforded by typical atmosphere-ocean general circulation models (AOGCMs), owing, in particular, to the need to resolve the narrow and steep margins where the majority of precipitation and ablation occurs. We have developed a method for calculating mass-balance changes by combining ice-sheet average time-series from AOGCM projections for future centuries, both with information from high-resolution climate models run for short periods and with a 20km ice-sheet mass-balance model. Antarctica contributes negatively to sea level on account of increased accumulation, while Greenland contributes positively because ablation increases more rapidly. The uncertainty in the results is about 20% for Antarctica and 35% for Greenland. Changes in ice-sheet topography and dynamics are not included, but we discuss their possible effects. For an annual- and area-average warming exceeding 4.5+/-0.9K in Greenland and 3.1+/-0.8K in the global average, the net surface mass balance of the Greenland ice sheet becomes negative, in which case it is likely that the ice sheet would eventually be eliminated, raising global-average sea level by 7m.

The use of health related quality of life data to produce information sheets for patients with head and neck cancer.

PubMed

Rogers, S N; Hogg, E S; Cheung, W K A; Lai, L K L; Jassal, P; Lowe, D

2015-07-01

Health related quality of life information gives patients and carers an indication of how they will be affected following treatment. Such knowledge can promote realistic expectations and help patients come to terms with their outcome. The aim of this paper is to describe the background development of patient information sheets produced at our unit. The data were compiled using a common head and neck cancer specific quality of life questionnaire (University of Washington Quality of Life [UW-QOL]). There are 12 domains comprising activity, appearance, anxiety, chewing, mood, pain, recreation, saliva, shoulder, speech, swallowing and taste. The data were collected over 19 years at our unit and focus on follow-up records at around 2 years as this gives a good indication of health related quality of life in survivorship. UW-QOL questionnaires were available from 1,511 patients treated following primary diagnosis of head and neck cancer, and there were 24 subgroups based on cancer site, stage and treatment. There were 2 other subgroups: 132 having transoral laser resection and 176 having laryngectomy. The patient and carer research forum helped to design the information sheets, which display overall quality of life, percentages with 'good' outcome and 'significant problem' by domain, and the most important domains. Three examples are included in this paper: early stage oral cancer treated by surgery alone, early laryngeal cancer treated by surgery alone, and late stage oropharyngeal cancer treated by surgery and postoperative radiotherapy. All 26 subgroup information sheets are available in booklet form and on the internet. How the surgical community best utilises this type of resource needs further research.

Personal cooling apparatus and method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siman-Tov, Moshe; Crabtree, Jerry Allen

2001-01-01

A portable lightweight cooling apparatus for cooling a human body is disclosed, having a channeled sheet which absorbs sweat and/or evaporative liquid, a layer of highly conductive fibers adjacent the channeled sheet; and, an air-moving device for moving air through the channeled sheet, wherein the layer of fibers redistributes heat uniformly across the object being cooled, while the air moving within the channeled sheet evaporates sweat and/or other evaporative liquid, absorbs evaporated moisture and the uniformly distributed heat generated by the human body, and discharges them into the environment. Also disclosed is a method for removing heat generated by themore » human body, comprising the steps of providing a garment to be placed in thermal communication with the body; placing a layer of highly conductive fibers within the garment adjacent the body for uniformly distributing the heat generated by the body; attaching an air-moving device in communication with the garment for forcing air into the garment; removably positioning an exchangeable heat sink in communication with the air-moving device for cooling the air prior to the air entering the garment; and, equipping the garment with a channeled sheet in communication with the air-moving device so that air can be directed into the channeled sheet and adjacent the layer of fibers to expell heat and moisture from the body by the air being directed out of the channeled sheet and into the environment. The cooling system may be configured to operate in both sealed and unsealed garments.« less

Personal cooling apparatus and method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siman-Tov, Moshe; Crabtree, Jerry Allen

A portable lightweight cooling apparatus for cooling a human body is disclosed, having a channeled sheet which absorbs sweat and/or evaporative liquid, a layer of highly conductive fibers adjacent the channeled sheet; and, an air-moving device for moving air through the channeled sheet, wherein the layer of fibers redistributes heat uniformly across the object being cooled, while the air moving within the channeled sheet evaporates sweat and/or other evaporative liquid, absorbs evaporated moisture and the uniformly distributed heat generated by the human body, and discharges them into the environment. Also disclosed is a method for removing heat generated by themore » human body, comprising the steps of providing a garment to be placed in thermal communication with the body; placing a layer of highly conductive fibers within the garment adjacent the body for uniformly distributing the heat generated by the body; attaching an air-moving device in communication with the garment for forcing air into the garment; removably positioning an exchangeable heat sink in communication with the air-moving device for cooling the air prior to the air entering the garment; and, equipping the garment with a channeled sheet in communication with the air-moving device so that air can be directed into the channeled sheet and adjacent the layer of fibers to expell heat and moisture from the body by the air being directed out of the channeled sheet and into the environment. The cooling system may be configured to operate in both sealed and unsealed garments.« less

Personal cooling apparatus and method

DOEpatents

Siman-Tov, Moshe; Crabtree, Jerry Allen

2001-01-01

A portable lightweight cooling apparatus for cooling a human body is disclosed, having a channeled sheet which absorbs sweat and/or evaporative liquid, a layer of highly conductive fibers adjacent the channeled sheet; and, an air-moving device for moving air through the channeled sheet, wherein the layer of fibers redistributes heat uniformly across the object being cooled, while the air moving within the channeled sheet evaporates sweat and/or other evaporative liquid, absorbs evaporated moisture and the uniformly distributed heat generated by the human body, and discharges them into the environment. Also disclosed is a method for removing heat generated by the human body, comprising the steps of providing a garment to be placed in thermal communication with the body; placing a layer of highly conductive fibers within the garment adjacent the body for uniformly distributing the heat generated by the body; attaching an air-moving device in communication with the garment for forcing air into the garment; removably positioning an exchangeable heat sink in communication with the air-moving device for cooling the air prior to the air entering the garment; and, equipping the garment with a channeled sheet in communication with the air-moving device so that air can be directed into the channeled sheet and adjacent the layer of fibers to expell heat and moisture from the body by the air being directed out of the channeled sheet and into the environment. The cooling system may be configured to operate in both sealed and unsealed garments.

Basic forensic identification of artificial leather for hit-and-run cases.

PubMed

Sano, Tetsuya; Suzuki, Shinichi

2009-11-20

Single fibers retrieved from a victim's garments and adhered to the suspect's automobile have frequently been used to prove the relationship between victim and suspect's automobile. Identification method for single fiber discrimination has already been conducted. But, a case was encountered requiring discrimination of artificial leather fragments retrieved from the victim's bag and fused fibers from the bumper of the suspect's automobile. In this report, basic studies were conducted on identification of artificial leathers and single fibers from leather materials. Fiber morphology was observed using scanning electron microscopy (SEM), color of these leather sheets was evaluated by microspectrophotometry (MSP), the leather components were measured by infrared micro spectrometry (micro-FT-IR) and the inorganic contents were ascertained by micro-X-ray fluorescence spectrometry (micro-XRF). These two methods contribute to other analytical methods too, in the case of utilized single fiber analytical methods. The combination of these techniques showed high potential of discrimination ability in forensic examinations of these artificial leather samples. In regard with smooth surface artificial leather sheet samples, a total of 182 sheets were obtained, including 177 colored sheets directly from 10 of 24 manufacturers in Japan, and five of them were purchased at retail circulation products. Nine samples of suede-like artificial leather were obtained, 6 of them were supplied from 2 manufacturers and 3 sheets were purchased as retailing product. Single fibers from the smooth surface artificial leather sheets showed characteristic for surface markings, and XRF could effectively discriminate between these sheets. The combination of results of micro-FT-IR, color evaluation by MSP and the contained inorganic elements by XRF enabled to discriminate about 92% of 15,576 pairs comparison. Five smooth surface samples form retailing products were discriminated by their chemical composition into four categories, and in addition color information to this result, they were clearly distinguished. Suede-like artificial leather sheets showed characteristic extra-fine fibers on their surface by the observation of SEM imaging, providing high discriminating ability, in regard with suede-like artificial leather sheets were divided into three categories by micro-FT-IR, and the combination of these results and color evaluation information, it was possible to discriminate all the nine suede-like artificial leather sheets examined.

On the Application of Science Systems Engineering and Uncertainty Quantification for Ice Sheet Science and Sea Level Projections

NASA Astrophysics Data System (ADS)

Schlegel, Nicole-Jeanne; Boening, Carmen; Larour, Eric; Limonadi, Daniel; Schodlok, Michael; Seroussi, Helene; Watkins, Michael

2017-04-01

Research and development activities at the Jet Propulsion Laboratory (JPL) currently support the creation of a framework to formally evaluate the observational needs within earth system science. One of the pilot projects of this effort aims to quantify uncertainties in global mean sea level rise projections, due to contributions from the continental ice sheets. Here, we take advantage of established uncertainty quantification tools embedded within the JPL-University of California at Irvine Ice Sheet System Model (ISSM). We conduct sensitivity and Monte-Carlo style sampling experiments on forward simulations of the Greenland and Antarctic ice sheets. By varying internal parameters and boundary conditions of the system over both extreme and credible worst-case ranges, we assess the impact of the different parameter ranges on century-scale sea level rise projections. The results inform efforts to a) isolate the processes and inputs that are most responsible for determining ice sheet contribution to sea level; b) redefine uncertainty brackets for century-scale projections; and c) provide a prioritized list of measurements, along with quantitative information on spatial and temporal resolution, required for reducing uncertainty in future sea level rise projections. Results indicate that ice sheet mass loss is dependent on the spatial resolution of key boundary conditions - such as bedrock topography and melt rates at the ice-ocean interface. This work is performed at and supported by the California Institute of Technology's Jet Propulsion Laboratory. Supercomputing time is also supported through a contract with the National Aeronautics and Space Administration's Cryosphere program.

Retraso Mental. Traduccion de ERIC EC Digest #528. (Mental Retardation. Translation of ERIC EC Digest #528).

ERIC Educational Resources Information Center

Hawkins-Shepard, Charlotte

This fact sheet presents basic information on mental retardation for Spanish-speaking educators and others. First, definitions from the Individuals with Disabilities Education Act (IDEA) and the American Association on Mental Retardation (AAMR) are presented. The fact sheet then analyzes how the new AAMR definitions differ from earlier ones,…

Toxic Substances Registry System: Index of Material Safety Data Sheets. Revised

NASA Technical Reports Server (NTRS)

1998-01-01

The January 1998 revision of the Index of Materials Safety Data Sheets (MSDS) for the Kennedy Space Center (KSC) Toxic Substances Registry System (TSRS) is presented. The MSDS lists toxic substances by manufacturer, trade name, stock number, and distributor. The index provides information on hazards, use, and chemical composition of materials stored at KSC.

Speech and Language Disorders. Fact Sheet = Trastornos del Habla y Lenguaje. Hojas Informativas Sobre Discapacidades.

ERIC Educational Resources Information Center

National Information Center for Children and Youth with Disabilities, Washington, DC.

This fact sheet on speech and language disorders is presented in English and Spanish. It provides information on the definition of speech and language disorders and possible causes; the incidence (about one in ten people); and characteristics of delayed communication, speech disorders, and language disorders. It notes educational implications,…

Facts for Families from the American Academy of Child and Adolescent Psychiatry [1990].

ERIC Educational Resources Information Center

American Academy of Child and Adolescent Psychiatry, Washington, DC.

Four fact sheets relevant to children's emotional well being are presented in this document. The first fact sheet, "Responding to Child Sexual Abuse" presents guidelines for responding to children who have been sexually abused. Information is given for reporting abuse to the local Child Protection Agency. Also discussed are issues regarding…

Advancing Next-Generation Energy in Indian Country (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-08-01

This fact sheet provides information on Tribes in the lower 48 states selected to receive assistance from the Strategic Technical Assistance Response Team (START) Program, a U.S. Department of Energy Office of Indian Energy Policy and Programs (DOE-IE) initiative to provide technical expertise to support the development of next-generation energy projects in Indian Country.

Advancing Next-Generation Energy in Indian Country (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-08-01

This fact sheet provides information on the Alaska Native governments selected to receive assistance from the Strategic Technical Assistance Response Team (START) Program, a U.S. Department of Energy Office of Indian Energy Policy and Programs (DOE-IE) initiative to provide technical expertise to support the development of next-generation energy projects in Indian Country.

Toxic Substances Registry System: Index of Material Safety Data Sheets. Volume 1; Manufacturer

NASA Technical Reports Server (NTRS)

1998-01-01

The April 1998 revision of the Index of Materials Safety Data Sheets (MSDS) for the Kennedy Space Center (KSC) Toxic Substances Registry System (TSRS) is presented. The MSDS lists toxic substances by manufacturer, trade name, stock number, and distributor. The index provides information on hazards, use, and chemical composition of materials stored at KSC.

Toxic Substances Registry System Index of Material Safety Data Sheets

NASA Technical Reports Server (NTRS)

1997-01-01

The July 1997 revision of the Index of Material Safety Data Sheets (MSDS) for the Kennedy Space Center (KSC) Toxic Substances Registry System (TSRS) is presented. The MSDS lists toxic substances by manufacturer, trade name, stock number, and distributor. The index provides information on hazards, use, and chemical composition of materials stored at KSC.

Secured Transactions: An Integrated Classroom Approach Using Financial Statements and Acronyms

ERIC Educational Resources Information Center

Seganish, W. Michael

2005-01-01

Students struggle with the subject of secured transactions under the Uniform Commercial Code. In this article, the author presents a method that uses balance-sheet information to help students visualize the difference between secured and unsecured creditors. The balance sheet is also used in the Uniform Commercial Code process, in which one must…

Organizational Strategies to Increase Content Area Learning: Webbing, Pyramiding, and Think Sheets.

ERIC Educational Resources Information Center

Clewell, Suzanne; Haidemenos, Julie

A review of schema theory and memory research shows how the organization of text can affect comprehension and how three reading strategies can aid in improving student understanding of content area materials. The three strategies that help students remember information from the author's point of view are webbing, pyramiding, and think sheets. They…

Health and Nutrition Curriculum. Informative and Fun for K-8!

ERIC Educational Resources Information Center

National Heart Savers Association, Omaha, NE.

This health and nutrition curriculum for students in grades K-8 teaches students good health habits in order to improve their quality of life. The curriculum consists of a series of activity sheets that offer entertaining and educational activities designed to motivate students to learn while they have fun. Each activity sheet contains a…

Case Management for Individuals with Mental Retardation. ARC Facts.

ERIC Educational Resources Information Center

Association for Retarded Citizens, Arlington, TX.

A question-and-answer format is used in this fact sheet to provide information on case management for individuals with mental retardation. The fact sheet describes the major components of a case management system, the role of the case manager, the individual's or family's role in case management, providers of case management services and systems…

"Gulliver's Travels" by Alfred Silver with Music by Stephen Naylor. Cue Sheet for Students.

ERIC Educational Resources Information Center

Waterfall, Milde; Flynn, Rosalind, Ed.

Designed to be used before and after attending a musical adaptation of Jonathan's Swift's "Gulliver's Travels" (performed by the Mermaid Theatre of Nova Scotia), this cue sheet presents information about the performance and suggests activities that can be done with classmates, friends, or family members. Beginning with an illustration of…

Curvature-induced stiffness and the spatial variation of wavelength in wrinkled sheets

PubMed Central

Hohlfeld, Evan; King, Hunter; Huang, Jiangshui; Qiu, Zhanlong; Russell, Thomas P.; Menon, Narayanan; Vella, Dominic; Davidovitch, Benny

2016-01-01

Wrinkle patterns in compressed thin sheets are ubiquitous in nature and technology, from the furrows on our foreheads to crinkly plant leaves, from ripples on plastic-wrapped objects to the protein film on milk. The current understanding of an elementary descriptor of wrinkles—their wavelength—is restricted to deformations that are parallel, spatially uniform, and nearly planar. However, most naturally occurring wrinkles do not satisfy these stipulations. Here we present a scheme that quantitatively explains the wrinkle wavelength beyond such idealized situations. We propose a local law that incorporates both mechanical and geometrical effects on the spatial variation of wrinkle wavelength. Our experiments on thin polymer films provide strong evidence for its validity. Understanding how wavelength depends on the properties of the sheet and the underlying liquid or elastic subphase is crucial for applications where wrinkles are used to sculpt surface topography, to measure properties of the sheet, or to infer forces applied to a film. PMID:26787902

AVAILABLE INSTRUCTIONAL MATERIALS.

ERIC Educational Resources Information Center

Indiana State Univ., Terre Haute.

THE INSTRUCTIONAL MATERIALS INCLUDE PROGRAM BROCHURES, CHARTS, COURSE OUTLINES, OVERHEAD TRANSPARENCIES, ASSIGNMENT SHEETS, STUDENT MANUALS, TEACHER MANUALS, TECHNICAL INFORMATION, AND RELATED INFORMATION IN VOCATIONAL EDUCATION. A BRIEF NOTE DESCRIBES EACH. (EM)

Thin laser light sheet microscope for microbial oceanography

NASA Astrophysics Data System (ADS)

Fuchs, Eran; Jaffe, Jules S.; Long, Richard A.; Azam, Farooq

2002-01-01

Despite a growing need, oceanographers are limited by existing technological constrains and are unable to observe aquatic microbes in their natural setting. In order to provide a simple and easy to implement solution for such studies, a new Thin Light Sheet Microscope (TLSM) has been developed. The TLSM utilizes a well-defined sheet of laser light, which has a narrow (23 micron) axial dimension over a 1 mm x 1 mm field of view. This light sheet is positioned precisely within the depth of field of the microscope’s objective lens. The technique thus utilizes conventional microscope optics but replaces the illumination system. The advantages of the TLSM are two-fold: First, it concentrates light only where excitation is needed, thus maximizing the efficiency of the illumination source. Secondly, the TLSM maximizes image sharpness while at the same time minimizing the level of background noise. Particles that are not located within the objective's depth of field are not illuminated and therefore do not contribute to an out-of-focus image. Images from a prototype system that used SYBR Green I fluorescence stain in order to localize single bacteria are reported. The bacteria were in a relatively large and undisturbed volume of 4ml, which contained natural seawater. The TLSM can be used for fresh water studies of bacteria with no modification. The microscope permits the observation of interactions at the microscale and has potential to yield insights into how microbes structure pelagic ecosystems.

Kelvin-Helmholtz instability of stratified jets.

NASA Astrophysics Data System (ADS)

Hanasz, M.; Sol, H.

1996-11-01

We investigate the Kelvin-Helmholtz instability of stratified jets. The internal component (core) is made of a relativistic gas moving with a relativistic bulk speed. The second component (sheath or envelope) flows between the core and external gas with a nonrelativistic speed. Such a two-component jet describes a variety of possible astrophysical jet configurations like e.g. (1) a relativistic electron-positron beam penetrating a classical electron-proton disc wind or (2) a beam-cocoon structure. We perform a linear stability analysis of such a configuration in the hydrodynamic, plane-parallel, vortex-sheet approximation. The obtained solutions of the dispersion relation show very apparent differences with respect to the single-jet solutions. Due to the reflection of sound waves at the boundary between sheet and external gas, the growth rate as a function of wavenumber presents a specific oscillation pattern. Overdense sheets can slow down the growth rate and contribute to stabilize the configuration. Moreover, we obtain the result that even for relatively small sheet widths the properties of sheet start to dominate the jet dynamics. Such effects could have important astrophysical implications, for instance on the origin of the dichotomy between radio-loud and radio-quiet objects.

Use of a gentamicin-impregnated collagen sheet (Collatamp(®)) in the management of major soft tissue complications in pediatric cochlear implants.

PubMed

Benito-González, Fernando; Benito, Jose; Sánchez, Luis Alberto Guardado; Estevez Alonso, Santiago; Muñoz Herrera, Angel; Batuecas-Caletrio, Angel

2014-09-01

The objective was to report the effectiveness of salvage treatment in soft tissue infection around cochlear implants with an absorbable gentamicin collagen sheet and a periosteum and skin rotation flaps. Three patients with cochlear implant and persistent surrounding soft tissue infection are included. All of them underwent antibiotic treatment prior to surgery without any response. In this study preoperative and postoperative audiograms were practiced. Surgical excision of infectious skin and a periosteum and skin rotation flaps were performed. The cochlear implant was refixed in the temporal bone and a gentamicin-impregnated collagen sheet was located covering the cochlear implant. headings In all patients with soft tissue infection around the cochlear implant, infection was completely resolved. It was not necessary to remove the device in any case. The use of an absorbable gentamicin-impregnated collagen sheet is not described for the management of soft tissue complications in pediatric cochlear implant patients. The local application of high concentrations of antibiotic administered by this sheet may be effective against resistant bacteria and, in conjunction with surgery, may resolve this type of complications.

Personalized disease-specific protein corona influences the therapeutic impact of graphene oxide.

PubMed

Hajipour, Mohammad Javad; Raheb, Jamshid; Akhavan, Omid; Arjmand, Sareh; Mashinchian, Omid; Rahman, Masoud; Abdolahad, Mohammad; Serpooshan, Vahid; Laurent, Sophie; Mahmoudi, Morteza

2015-05-21

The hard corona, the protein shell that is strongly attached to the surface of nano-objects in biological fluids, is recognized as the first layer that interacts with biological objects (e.g., cells and tissues). The decoration of the hard corona (i.e., the type, amount, and conformation of the attached proteins) can define the biological fate of the nanomaterial. Recent developments have revealed that corona decoration strongly depends on the type of disease in human patients from which the plasma is obtained as a protein source for corona formation (referred to as the 'personalized protein corona'). In this study, we demonstrate that graphene oxide (GO) sheets can trigger different biological responses in the presence of coronas obtained from various types of diseases. GO sheets were incubated with plasma from human subjects with different diseases/conditions, including hypofibrinogenemia, blood cancer, thalassemia major, thalassemia minor, rheumatism, fauvism, hypercholesterolemia, diabetes, and pregnancy. Identical sheets coated with varying protein corona decorations exhibited significantly different cellular toxicity, apoptosis, and uptake, reactive oxygen species production, lipid peroxidation and nitrogen oxide levels. The results of this report will help researchers design efficient and safe, patient-specific nano biomaterials in a disease type-specific manner for clinical and biological applications.

Guided magnonic Michelson interferometer

PubMed Central

Ahmed, Muhammad H.; Jeske, Jan; Greentree, Andrew D.

2017-01-01

Magnonics is an emerging field with potential applications in classical and quantum information processing. Freely propagating magnons in two-dimensional media are subject to dispersion, which limits their effective range and utility as information carriers. We show the design of a confining magnonic waveguide created by two surface current carrying wires placed above a spin-sheet, which can be used as a primitive for reconfigurable magnonic circuitry. We theoretically demonstrate the ability of such guides to counter the transverse dispersion of the magnon in a spin-sheet, thus extending the range of the magnon. A design of a magnonic directional coupler and controllable Michelson interferometer is shown, demonstrating its utility for information processing tasks. PMID:28134271

78 FR 46930 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... Counseling and Information Sheet; DA Form 5434; OMB Control Number 0702-TBD. Needs And Uses: The information.... Frequency: On Occasion. SUPPLEMENTARY INFORMATION: Summary of Information Collection Respondents are DA Civilian employees and Soldiers. Departing Soldiers or DA Civilian employees complete the DA Form 5434...

Design and development of LED-based irregular leather area measuring machine

NASA Astrophysics Data System (ADS)

Adil, Rehan; Khan, Sarah Jamal

2012-01-01

Using optical sensor array, a precision motion control system in a conveyer follows the irregular shaped leather sheet to measure its surface area. In operation, irregular shaped leather sheet passes on conveyer belt and optical sensor array detects the leather sheet edge. In this way outside curvature of the leather sheet is detected and is then feed to the controller to measure its approximate area. Such system can measure irregular shapes, by neglecting rounded corners, ellipses etc. To minimize the error in calculating surface area of irregular curve to the above mentioned system, the motion control system only requires the footprint of the optical sensor to be small and the distance between the sensors is to be minimized. In the proposed technique surface area measurement of irregular shaped leather sheet is done by defining velocity and detecting position of the move. The motion controller takes the information and creates the necessary edge profile on point-to-point bases. As a result irregular shape of leather sheet is mapped and is then feed to the controller to calculate surface area.

Effect of CFRP Schemes on the Flexural Behavior of RC Beams Modeled by Using a Nonlinear Finite-element Analysis

NASA Astrophysics Data System (ADS)

Al-Rousan, R. Z.

2015-09-01

The main objective of this study was to assess the effect of the number and schemes of carbon-fiber-reinforced polymer (CFRP) sheets on the capacity of bending moment, the ultimate displacement, the ultimate tensile strain of CFRP, the yielding moment, concrete compression strain, and the energy absorption of RC beams and to provide useful relationships that can be effectively utilized to determine the required number of CFRP sheets for a necessary increase in the flexural strength of the beams without a major loss in their ductility. To accomplish this, various RC beams, identical in their geometric and reinforcement details and having different number and configurations of CFRP sheets, are modeled and analyzed using the ANSYS software and a nonlinear finite-element analysis.

Formation of Sprays From Conical Liquid Sheets

NASA Technical Reports Server (NTRS)

Peck, Bill; Mansour, N. N.; Koga, Dennis (Technical Monitor)

1999-01-01

Our objective is to predict droplet size distributions created by fuel injector nozzles in Jet turbines. These results will be used to determine the initial conditions for numerical simulations of the combustion process in gas turbine combustors. To predict the droplet size distribution, we are currently constructing a numerical model to understand the instability and breakup of thin conical liquid sheets. This geometry serves as a simplified model of the liquid jet emerging from a real nozzle. The physics of this process is difficult to study experimentally as the time and length scales are very short. From existing photographic data, it does seem clear that three-dimensional effects such as the formation of streamwise ligaments and the pulling back of the sheet at its edges under the action of surface tension are important.

A scanning radar altimeter for mapping continental topography

NASA Technical Reports Server (NTRS)

Dixon, T. H.

1986-01-01

Topographic information constitutes a fundamental data set for the Earth sciences. In the geological and geophysical sciences, topography combined with gravitational information provides an important constraint on the structure and rheologic properties of the crust and lithosphere. Detailed topography data can also be used to map offsets associated with faulting and to reveal the effects of tectonic deformation. In the polar regions, elevation data form a crucial but as yet largely unavailable resource for studying ice sheet mass balance and ice flow dynamics. The vast Antarctic ice sheet is the largest fresh water reservoir on Earth and is an important influence on ocean circulation and global climate. However, our knowledge of its stability is so limited that we cannot even specify whether the Antarctic ice sheet is growing or shrinking. It is clear that there is need for high quality global topography data. A summary of potential applications with their resolution requirements is shown.

Entrainment, transport and concentration of meteorites in polar ice sheets

NASA Technical Reports Server (NTRS)

Drewry, D. J.

1986-01-01

Glaciers and ice sheets act as slow-moving conveyancing systems for material added to both their upper and lower surfaces. Because the transit time for most materials is extremely long the ice acts as a major global storage facility. The effects of horizontal and vertical motions on the flow patterns of Antarctic ice sheets are summarized. The determination of the source areas of meteorites and their transport paths is a problem of central importance since it relates not only directly to concentration mechanisms but also to the wider issues in glaciology and meteorites. The ice and snow into which a meteorite falls, and which moves with it to the concentration area, encodes information about the infall area. The principle environmental conditions being former elevation, temperature (also related to elevation), and age of the ice. This encoded information could be used to identify the infall area.

Exenatide Injection

MedlinePlus

... way to manage your diabetes.Your doctor or pharmacist will give you the manufacturer's patient information sheet ( ... the information carefully and ask your doctor or pharmacist if you have any questions. You can also ...

Lixisenatide Injection

MedlinePlus

... way to manage your diabetes.Your doctor or pharmacist will give you the manufacturer's patient information sheet ( ... the information carefully and ask your doctor or pharmacist if you have any questions. You can also ...

31 CFR 26.5 - Upgrades and additional environmental information.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., such environmental information from the MDB (e.g., environmental chapters from project feasibility studies or environmental data sheets) which contains this environmental analysis. The MDB Office will...

Space Object Query Tool

NASA Technical Reports Server (NTRS)

Phillips, Veronica J.

2017-01-01

STI is for a fact sheet on the Space Object Query Tool being created by the MDC. When planning launches, NASA must first factor in the tens of thousands of objects already in orbit around the Earth. The number of human-made objects, including nonfunctional spacecraft, abandoned launch vehicle stages, mission-related debris and fragmentation debris orbiting Earth has grown steadily since Sputnik 1 was launched in 1957. Currently, the U.S. Department of Defenses Joint Space Operations Center, or JSpOC, tracks over 15,000 distinct objects and provides data for more than 40,000 objects via its Space-Track program, found at space-track.org.

Strontium eluting graphene hybrid nanoparticles augment osteogenesis in a 3D tissue scaffold

NASA Astrophysics Data System (ADS)

Kumar, Sachin; Chatterjee, Kaushik

2015-01-01

The objective of this work was to prepare hybrid nanoparticles of graphene sheets decorated with strontium metallic nanoparticles and demonstrate their advantages in bone tissue engineering. Strontium-decorated reduced graphene oxide (RGO_Sr) hybrid nanoparticles were synthesized by the facile reduction of graphene oxide and strontium nitrate. X-ray diffraction, transmission electron microscopy, and atomic force microscopy revealed that the hybrid particles were composed of RGO sheets decorated with 200-300 nm metallic strontium particles. Thermal gravimetric analysis further confirmed the composition of the hybrid particles as 22 wt% of strontium. Macroporous tissue scaffolds were prepared by incorporating RGO_Sr particles in poly(ε-caprolactone) (PCL). The PCL/RGO_Sr scaffolds were found to elute strontium ions in aqueous medium. Osteoblast proliferation and differentiation was significantly higher in the PCL scaffolds containing the RGO_Sr particles in contrast to neat PCL and PCL/RGO scaffolds. The increased biological activity can be attributed to the release of strontium ions from the hybrid nanoparticles. This study demonstrates that composites prepared using hybrid nanoparticles that elute strontium ions can be used to prepare multifunctional scaffolds with good mechanical and osteoinductive properties. These findings have important implications for designing the next generation of biomaterials for use in tissue regeneration.The objective of this work was to prepare hybrid nanoparticles of graphene sheets decorated with strontium metallic nanoparticles and demonstrate their advantages in bone tissue engineering. Strontium-decorated reduced graphene oxide (RGO_Sr) hybrid nanoparticles were synthesized by the facile reduction of graphene oxide and strontium nitrate. X-ray diffraction, transmission electron microscopy, and atomic force microscopy revealed that the hybrid particles were composed of RGO sheets decorated with 200-300 nm metallic strontium particles. Thermal gravimetric analysis further confirmed the composition of the hybrid particles as 22 wt% of strontium. Macroporous tissue scaffolds were prepared by incorporating RGO_Sr particles in poly(ε-caprolactone) (PCL). The PCL/RGO_Sr scaffolds were found to elute strontium ions in aqueous medium. Osteoblast proliferation and differentiation was significantly higher in the PCL scaffolds containing the RGO_Sr particles in contrast to neat PCL and PCL/RGO scaffolds. The increased biological activity can be attributed to the release of strontium ions from the hybrid nanoparticles. This study demonstrates that composites prepared using hybrid nanoparticles that elute strontium ions can be used to prepare multifunctional scaffolds with good mechanical and osteoinductive properties. These findings have important implications for designing the next generation of biomaterials for use in tissue regeneration. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr05060f

IT in Educational Administration and Management. CET Information Sheet No. 9.

ERIC Educational Resources Information Center

Monaco, Jenny; MacDonald, Lesley

This document provides information on the use of information technology (IT) to assist in educational management and administration, considers where future developments may lead, and provides definitions of IT and its elements--information handling, communications technology, and information transformation. The involvement of the Council for…

Open Energy Info (OpenEI) (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2010-12-01

The Open Energy Information (OpenEI.org) initiative is a free, open-source, knowledge-sharing platform. OpenEI was created to provide access to data, models, tools, and information that accelerate the transition to clean energy systems through informed decisions.

News Releases, Press Releases, Tip Sheet Statements

Science.gov Websites

United States Census Bureau Topics Population Latest Information Age and Sex Ancestry Children Mobility Population Estimates Population Projections Race Veterans Economy Latest Information Portal Other Economic Programs Business Latest Information Business Characteristics Classification Codes

75 FR 57832 - Agency Information Collection Activities: Proposed Information Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-22

..., minus receivables retained on the bank's balance sheet as of that day. The OCC will use the information...'' refers to the total amount of outstanding balances due on credit card accounts owned by an independent...

The Gamburtsev mountains and the origin and early evolution of the Antarctic Ice Sheet.

PubMed

Bo, Sun; Siegert, Martin J; Mudd, Simon M; Sugden, David; Fujita, Shuji; Xiangbin, Cui; Yunyun, Jiang; Xueyuan, Tang; Yuansheng, Li

2009-06-04

Ice-sheet development in Antarctica was a result of significant and rapid global climate change about 34 million years ago. Ice-sheet and climate modelling suggest reductions in atmospheric carbon dioxide (less than three times the pre-industrial level of 280 parts per million by volume) that, in conjunction with the development of the Antarctic Circumpolar Current, led to cooling and glaciation paced by changes in Earth's orbit. Based on the present subglacial topography, numerical models point to ice-sheet genesis on mountain massifs of Antarctica, including the Gamburtsev mountains at Dome A, the centre of the present ice sheet. Our lack of knowledge of the present-day topography of the Gamburtsev mountains means, however, that the nature of early glaciation and subsequent development of a continental-sized ice sheet are uncertain. Here we present radar information about the base of the ice at Dome A, revealing classic Alpine topography with pre-existing river valleys overdeepened by valley glaciers formed when the mean summer surface temperature was around 3 degrees C. This landscape is likely to have developed during the initial phases of Antarctic glaciation. According to Antarctic climate history (estimated from offshore sediment records) the Gamburtsev mountains are probably older than 34 million years and were the main centre for ice-sheet growth. Moreover, the landscape has most probably been preserved beneath the present ice sheet for around 14 million years.

Someday I May Want to Know about...Leisure and Recreational Activities for Children and Adults with Mental Retardation. A MCARC Information Sheet.

ERIC Educational Resources Information Center

Montgomery County Association for Retarded Citizens, Rockville, MD.

The fact sheet considers the importance of recreation and leisure time activities for people with mental retardation. A case is made for mainstreamed services, and suggestions are offered for families seeking to procure successful mainstreamed experiences in community recreational programs. Among suggestions are adapting family games to the…

Fuels planning: science synthesis and integration; economic uses fact sheet 05: NEPA and economics

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

The National Environmental Policy Act (NEPA) is the law that requires Federal agencies to consider the environmental impacts of their actions, involve the public in the decisionmaking process, and disclose information, starting at the initial stages of planning. This fact sheet discusses when you should consider economics in the NEPA process, when to do an analysis,...

Exploring the Moon: A Teacher's Guide with Activities for Earth and Space Sciences.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Washington, DC.

These materials have been designed for use with the upper elementary through high school levels especially, but not exclusively, with the Lunar Sample Disk. This book contains: information on the Lunar Sample Disk, a curriculum content matrix, a teacher's guide, Moon ABCs fact sheet, rock ABCs fact sheet, Progress in Lunar Science chart, 17…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Office of Strategic Programs, Strategic Priorities and Impact Analysis Team

This fact sheet "Carrboro, North Carolina: Achieving Building Efficiencies for Low-Income Households" explains how the Town of Carrboro used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

Fuels planning: science synthesis and integration; forest structure and fire hazard fact sheet 03: visualizing forest structure and fuels

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

The software described in this fact sheet provides managers with tools for visualizing forest and fuels information. Computer-based landscape simulations can help visualize stand and landscape conditions and the effects of different management treatments and fuel changes over time. These visualizations can assist forest planning by considering a range of management...

Fact Sheets - The National Guard

Science.gov Websites

National Guard About Us By the Numbers Contact Us FAQ Federal Mission History Join Us Leaders Director of March Today in Guard History Leadership CNGB VCNGB SEA DANG DARNG Joint Staff J-1 J-2 J-3 J-4 J-5 J-6 J ARNG Readiness Home : Resources : Fact Sheets General Information Air Guard History Army National Guard

Toxic Substances Registry System: Index of Material Safety Data Sheets. Revised

NASA Technical Reports Server (NTRS)

1997-01-01

The October 1997 revision of the Index of Material Safety Data Sheets (MSDS) for the Kennedy Space Center (KSC) Toxic Substances Registry System (TSRS) is presented. The MSDS lists toxic substances by manufacturer, trade name, stock number, and distributor. The index provides information on the hazards, use, and chemical composition of materials stored and used at KSC.

75 FR 24892 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

... Industry Support Calculation Coated Paper Suitable For High-Quality Print Graphics Using Sheet-Fed Presses... employs an industry-wide test to determine whether, under section 773(c)(1)(B), available information in... sections 771(33)(E) and (F) of the Act. In addition, we find that Shandong Sun Paper Industry Joint Stock...

The Importance of Orientation and Mobility Skills for Students Who Are Deaf-Blind. DB-LINK Fact Sheet.

ERIC Educational Resources Information Center

Gense, D. Jay; Gense, Marilyn

This fact sheet about students who are deaf-blind provides information on orientation and mobility (O&M) training. It begins by describing orientation and mobility skills, and emphasizes the need for a team approach in the development and implementation of O&M instruction. Instructional strategies are described, including initial assessment of O&M…

Women, Work and Health Hazards: A Fact Sheet and Cosmetologists: Health Risks at Work.

ERIC Educational Resources Information Center

National Commission on Working Women, Washington, DC.

The first part of this document is a fact sheet that provides information on health hazards faced by employed women. It covers the Occupational Safety and Health Act (OSHA), job-related diseases suffered by workers in female-dominated occupations, employer responsibilities under OSHA, and the lack of statistical reporting on job-related disease.…

How To Modify a Trailer for Accessibility (Up to a Point) [and] Accessibility Considerations for Home Buyers. Key Notes.

ERIC Educational Resources Information Center

Access Group, Atlanta, GA.

Two brief fact sheets for people with disabilities provide information on: (1) modifying a trailer to make it accessible for persons with mobility impairments, especially those in wheelchairs, and (2) accessibility considerations for home buyers or home owners with mobility impairments. The first fact sheet identifies inherent problems in…

Conflict minerals from the Democratic Republic of the Congo—Tin processing plants, a critical part of the tin supply chain

USGS Publications Warehouse

Anderson, Charles

2015-03-24

Post-beneficiation processing plants (generally called smelters and refineries) for 3TG mineral ores and concentrates were identified by company and industry association representatives as being a link in the 3TG mineral supply chain through which these minerals can be traced to their source of origin (mine). The determination of the source of origin is critical to the development of a complete and transparent conflict-free mineral supply chain. Tungsten processing plants were the subject of the first fact sheet in this series published by the USGS NMIC in August 2014. Background information about historical conditions and multinational stakeholders’ voluntary due diligence guidance for minerals from conflict-affected and high-risk areas was presented in the tungsten fact sheet. Tantalum processing plants were the subject of the second fact sheet in this series published by the USGS NMIC in December 2014. This fact sheet, the third in the series about 3TG minerals, focuses on the tin supply chain by listing selected processors that produced tin materials commercially worldwide during 2013–14. It does not provide any information regarding the sources of the material processed in these facilities.

Space Station needs, attributes and architectural options. Volume 2, book 1, part 4: Payload element mission data sheets

NASA Technical Reports Server (NTRS)

1984-01-01

Data sheets are presented for 11 internal payloads, 30 externally mounted payloads, and 46 free flyers. The importance of the space station to each payload element is rated on a scale of 1 to 10. The type of experiment noncommercial science and applications, commercial, technological, and operational is indicated and the payload and its objectives are described. Space is provided for noting requirements for power; data/communication; thermal environment; equipment physical characteristics; crew size; and service and maintenance.

High-fidelity large area nano-patterning of silicon with femtosecond light sheet

NASA Astrophysics Data System (ADS)

Sidhu, Mehra S.; Munjal, Pooja; Singh, Kamal P.

2018-01-01

We employ a femtosecond light sheet generated by a cylindrical lens to rapidly produce high-fidelity nano-structures over large area on silicon surface. The Fourier analysis of electron microscopy images of the laser-induced surface structures reveals sharp peaks indicating good homogeneity. We observed an emergence of second-order spatial periodicity on increasing the scan speed. Our reliable approach may rapidly nano-pattern curved solid surfaces and tiny objects for diverse potential applications in optical devices, structural coloring, plasmonic substrates and in high-harmonic generation.

Three-dimensional fluorescent microscopy via simultaneous illumination and detection at multiple planes.

PubMed

Ma, Qian; Khademhosseinieh, Bahar; Huang, Eric; Qian, Haoliang; Bakowski, Malina A; Troemel, Emily R; Liu, Zhaowei

2016-08-16

The conventional optical microscope is an inherently two-dimensional (2D) imaging tool. The objective lens, eyepiece and image sensor are all designed to capture light emitted from a 2D 'object plane'. Existing technologies, such as confocal or light sheet fluorescence microscopy have to utilize mechanical scanning, a time-multiplexing process, to capture a 3D image. In this paper, we present a 3D optical microscopy method based upon simultaneously illuminating and detecting multiple focal planes. This is implemented by adding two diffractive optical elements to modify the illumination and detection optics. We demonstrate that the image quality of this technique is comparable to conventional light sheet fluorescent microscopy with the advantage of the simultaneous imaging of multiple axial planes and reduced number of scans required to image the whole sample volume.

Metallurgical characterization of brass objects from the Akko 1 shipwreck, Israel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashkenazi, D., E-mail: dana@eng.tau.ac.il; Cvikel, D.; Stern, A.

2014-06-01

The Akko 1 shipwreck was a small Egyptian armed vessel or auxiliary naval brig built in the eastern Mediterranean at the beginning of the 19th century. During the underwater excavations, about 230 brass hook-and-eye closures were found, mainly in the bow area. In addition, 158 brass cases were found, mainly between midships and the aft extremity of the shipwreck. Metallurgical non-destructive and destructive characterizations of selected items were performed, including radiographic testing, XRF, lead isotope analysis, optical microscopy, SEM–EDS and microhardness tests. The hook-and-eye closures and the cases were both found to be made of binary copper–zinc alloy (about 30more » wt.% zinc). While the brass cases were made from rolled sheets, hand-made using simple tools, and joined by tin–lead soldering material, the brass hook-and-eye closures were hand-made from drawn brass wire, and manufactured from commercial drawn brass bars by a cold-working process. The lead isotope analyses suggest different provenances of the raw materials used for making the brass objects, thus the different origins of the ores may hint that the brass wire and sheet were imported to the workshops in which the objects were manufactured. - Highlights: • Brass cases and hook-and-eye closures were retrieved from the Akko 1 shipwreck. • Both types of objects were made of binary copper–zinc alloy (about 30 wt.% zinc). • The cases were hand-made from rolled sheets and joined by tin–lead soldering. • Hook-and-eye closures were made from drawn brass wire manufactured by cold-working. • Lead isotope analyses suggest that the origins of the raw material were diverse.« less

Nature of science in instruction materials of science through the model of educational reconstruction

NASA Astrophysics Data System (ADS)

Azizah, Nur; Mudzakir, Ahmad

2016-02-01

The study was carried out to reconstruct the science teaching materials charged view of the nature of science (VNOS). This reconstruction process using the Model of Educational Reconstruction (MER), which is the framework for research and development of science education as well as a guide for planning the teaching of science in the schools is limited in two stages, namely: content structure analysis, and empirical studies of learners. The purpose of this study is to obtain a pre-conception of learners and prospective scientists to the topic of the nature of the material and utilization. The method used to descriptive with the instruments is guidelines for interviews for 15 students of class VIII, text analysis sheet, sheet analysis of the concept, and the validation sheet indicators and learning objectives NOS charged on cognitive and affective aspects. The results obtained in the form of pre-conceptions of learners who demonstrate almost 100% of students know the types of materials and some of its nature, the results of the scientist's perspective on the topic of the nature of the material and its use, as well as the results of the validation indicators and learning objectives charged NOS and competencies PISA 2015 cognitive and affective aspects with CVI value of 0.99 and 1.0 after being validated by five experts. This suggests that the indicators and the resulting learning objectives feasible and can proceed to the reconstruction of teaching materials on the topic of material properties and utilization.

Method for Examination and Documentation of Basic Information and Metadata from Published Reports Relevant to the Study of Stormwater Runoff Quality

USGS Publications Warehouse

Dionne, Shannon G.; Granato, Gregory E.; Tana, Cameron K.

1999-01-01

A readily accessible archive of information that is valid, current, and technically defensible is needed to make informed highway-planning, design, and management decisions. The National Highway Runoff Water-Quality Data and Methodology Synthesis (NDAMS) is a cataloging and assessment of the documentation of information relevant to highway-runoff water quality available in published reports. The report review process is based on the NDAMS review sheet, which was designed by the USGS with input from the FHWA, State transportation agencies, and the regulatory community. The report-review process is designed to determine the technical merit of the existing literature in terms of current requirements for data documentation, data quality, quality assurance and quality control (QA/QC), and technical issues that may affect the use of historical data. To facilitate the review process, the NDAMS review sheet is divided into 12 sections: (1) administrative review information, (2) investigation and report information, (3) temporal information, (4) location information (5) water-quality-monitoring information, (6) sample-handling methods, (7) constituent information, (8) sampling focus and matrix, (9) flow monitoring methods, (10) field QA/QC, (11) laboratory, and (12) uncertainty/error analysis. This report describes the NDAMS report reviews and metadata documentation methods and provides an overview of the approach and of the quality-assurance and quality-control program used to implement the review process. Detailed information, including a glossary of relevant terms, a copy of the report-review sheets, and reportreview instructions are completely documented in a series of three appendixes included with this report. Therefore the reviews are repeatable and the methods can be used by transportation research organizations to catalog new reports as they are published.

Informed consent during the clinical emergency of acute myocardial infarction (HERO-2 consent substudy): a prospective observational study.

PubMed

Williams, Barbara F; French, John K; White, Harvey D

2003-03-15

Anxiety, fear, pain, and treatment with morphine might compromise the ability of patients to comprehend information about, and give informed consent for, participation in clinical trials. We aimed to assess whether patients with acute myocardial infarction could understand written and verbal information and whether they were competent to give autonomous informed consent to participate in a clinical trial. We prospectively studied 399 patients with acute myocardial infarction in 16 hospitals in New Zealand and Australia who were eligible for participation in the Hirulog and Early Reperfusion or Occlusion (HERO)-2 trial. We assessed readability of patient information sheets, patients' educational status, their views of the consent process, comprehension of verbal and written information, and competence to give consent. The patient information sheet needed a year 13 (age 18) educational level for comprehension, although only 75 of 345 patients (22%) had been educated beyond secondary school. Only 63 of 346 (18%) read the patient information sheet before giving or refusing consent to participate. Patients who gave consent were more likely to report good or partial comprehension of the information provided than were those who refused consent (272 [89%] vs 14 [70%], respectively; p=0.009). In an assessment of competence to make an autonomous decision, 75 of 145 (52%) were ranked at the lowest grade and 26 (18%) were not competent to consent. Although the consent process for HERO-2 met regulatory requirements for clinical trials, it was inappropriate for the needs of most patients. The patients' comprehension of the information provided and their competence to autonomously give consent was less than optimum.

A Picture You Can Handle: Infants Treat Touch-Screen Images More Like Photographs than Objects.

PubMed

Ziemer, Christine J; Snyder, Makenna

2016-01-01

Infants actively explore their world in order to determine the different ways in which they can interact with various objects. Although research on infant perception has focused on how infants understand the differences between 2- and 3-dimensional objects, today's infants increasingly encounter 2D images with interactive qualities on smart-phone screens, tablets, and laptops. The purpose of this experiment was to examine the types of manual behaviors infants direct toward tablet images and to compare these actions to those evoked by 2D photographs or 3D when tactile feedback is controlled. Infants between the ages of 7-10 months sat on their parent's lap in front of a table with a built-in well covered by a clear, plastic sheet while the three types of displays (photographs, objects, and screen images on a tablet) were presented for 30 s each. Infants saw three examples of each type of display presented in the built-in well so that tactile feedback information from the different displays was controlled. Coders noted the proportion of trials in which infants grasped, scratched, rubbed, or patted the display. Results indicate that infants direct significantly more grasps, scratches, and rubs toward 3D objects than 2D photographs. Infants also direct more grasps to objects compared to screen images. Our data suggests that infants are treating screen images more similarly to 2D photographs than 3D objects.

Monitoring Antarctic ice sheet surface melting with TIMESAT algorithm

NASA Astrophysics Data System (ADS)

Ye, Y.; Cheng, X.; Li, X.; Liang, L.

2011-12-01

Antarctic ice sheet contributes significantly to the global heat budget by controlling the exchange of heat, moisture, and momentum at the surface-atmosphere interface, which directly influence the global atmospheric circulation and climate change. Ice sheet melting will cause snow humidity increase, which will accelerate the disintegration and movement of ice sheet. As a result, detecting Antarctic ice sheet melting is essential for global climate change research. In the past decades, various methods have been proposed for extracting snowmelt information from multi-channel satellite passive microwave data. Some methods are based on brightness temperature values or a composite index of them, and others are based on edge detection. TIMESAT (Time-series of Satellite sensor data) is an algorithm for extracting seasonality information from time-series of satellite sensor data. With TIMESAT long-time series brightness temperature (SSM/I 19H) is simulated by Double Logistic function. Snow is classified to wet and dry snow with generalized Gaussian model. The results were compared with those from a wavelet algorithm. On this basis, Antarctic automatic weather station data were used for ground verification. It shows that this algorithm is effective in ice sheet melting detection. The spatial distribution of melting areas(Fig.1) shows that, the majority of melting areas are located on the edge of Antarctic ice shelf region. It is affected by land cover type, surface elevation and geographic location (latitude). In addition, the Antarctic ice sheet melting varies with seasons. It is particularly acute in summer, peaking at December and January, staying low in March. In summary, from 1988 to 2008, Ross Ice Shelf and Ronnie Ice Shelf have the greatest interannual variability in amount of melting, which largely determines the overall interannual variability in Antarctica. Other regions, especially Larsen Ice Shelf and Wilkins Ice Shelf, which is in the Antarctic Peninsula region, have relative stable and consistent melt occurrence from year to year.

Prussian Blue

MedlinePlus

... Your Health Possible Health Effects Contamination and Exposure Acute Radiation Syndrome (ARS) Cutaneous Radiation Injury (CRI) Cancer and Long- ... Information for Professionals Radiation Thermometer Information for ... Radiation Syndrome: A Fact Sheet for Clinicians Cutaneous Radiation Injury ( ...

Filgrastim (Neupogen)

MedlinePlus

... Your Health Possible Health Effects Contamination and Exposure Acute Radiation Syndrome (ARS) Cutaneous Radiation Injury (CRI) Cancer and Long- ... Information for Professionals Radiation Thermometer Information for ... Radiation Syndrome: A Fact Sheet for Clinicians Cutaneous Radiation Injury ( ...

39 CFR 3.6 - Information furnished to Board-financial and operating reports.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the most recent accounting periods for which data are available, postal management shall furnish the...) Balance sheet information; (4) service quality measurements; (5) productivity measurements (reflecting...

Ustekinumab Injection

MedlinePlus

... or hard or where you have scars or stretch marks.Your doctor or pharmacist will give you the manufacturer's patient information sheet (Medication Guide) when you begin treatment with ustekinumab injection. Read the information carefully and ...

Secukinumab Injection

MedlinePlus

... or hard or where you have scars or stretch marks.Your doctor or pharmacist will give you the manufacturer's patient information sheet (Medication Guide) when you begin treatment with secukinumab injection. Read the information carefully and ...

Deep-Learning Technique To Convert a Crude Piezoresistive Carbon Nanotube-Ecoflex Composite Sheet into a Smart, Portable, Disposable, and Extremely Flexible Keypad.

PubMed

Lee, Jin-Woong; Chung, Jiyong; Cho, Min-Young; Timilsina, Suman; Sohn, Keemin; Kim, Ji Sik; Sohn, Kee-Sun

2018-06-20

An extremely simple bulk sheet made of a piezoresistive carbon nanotube (CNT)-Ecoflex composite can act as a smart keypad that is portable, disposable, and flexible enough to be carried crushed inside the pocket of a pair of trousers. Both a rigid-button-imbedded, rollable (or foldable) pad and a patterned flexible pad have been introduced for use as portable keyboards. Herein, we suggest a bare, bulk, macroscale piezoresistive sheet as a replacement for these complex devices that are achievable only through high-cost fabrication processes such as patterning-based coating, printing, deposition, and mounting. A deep-learning technique based on deep neural networks (DNN) enables this extremely simple bulk sheet to play the role of a smart keypad without the use of complicated fabrication processes. To develop this keypad, instantaneous electrical resistance change was recorded at several locations on the edge of the sheet along with the exact information on the touch position and pressure for a huge number of random touches. The recorded data were used for training a DNN model that could eventually act as a brain for a simple sheet-type keypad. This simple sheet-type keypad worked perfectly and outperformed all of the existing portable keypads in terms of functionality, flexibility, disposability, and cost.

Two-dimensional infrared spectroscopy reveals the complex behaviour of an amyloid fibril inhibitor

NASA Astrophysics Data System (ADS)

Middleton, Chris T.; Marek, Peter; Cao, Ping; Chiu, Chi-Cheng; Singh, Sadanand; Woys, Ann Marie; de Pablo, Juan J.; Raleigh, Daniel P.; Zanni, Martin T.

2012-05-01

Amyloid formation has been implicated in the pathology of over 20 human diseases, but the rational design of amyloid inhibitors is hampered by a lack of structural information about amyloid-inhibitor complexes. We use isotope labelling and two-dimensional infrared spectroscopy to obtain a residue-specific structure for the complex of human amylin (the peptide responsible for islet amyloid formation in type 2 diabetes) with a known inhibitor (rat amylin). Based on its sequence, rat amylin should block formation of the C-terminal β-sheet, but at 8 h after mixing, rat amylin blocks the N-terminal β-sheet instead. At 24 h after mixing, rat amylin blocks neither β-sheet and forms its own β-sheet, most probably on the outside of the human fibrils. This is striking, because rat amylin is natively disordered and not previously known to form amyloid β-sheets. The results show that even seemingly intuitive inhibitors may function by unforeseen and complex structural processes.

Solid-State NMR Studies Reveal Native-like β-Sheet Structures in Transthyretin Amyloid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lim, Kwang Hun; Dasari, Anvesh K. R.; Hung, Ivan

Structural characterization of amyloid rich in cross-β structures is crucial for unraveling the molecular basis of protein misfolding and amyloid formation associated with a wide range of human disorders. Elucidation of the β-sheet structure in noncrystalline amyloid has, however, remained an enormous challenge. Here we report structural analyses of the β-sheet structure in a full-length transthyretin amyloid using solid-state NMR spectroscopy. Magic-angle-spinning (MAS) solid-state NMR was employed to investigate native-like β-sheet structures in the amyloid state using selective labeling schemes for more efficient solid-state NMR studies. Analyses of extensive long-range 13 C- 13 C correlation MAS spectra obtained with selectivelymore » 13 CO- and 13 Cα-labeled TTR reveal that the two main β-structures in the native state, the CBEF and DAGH β-sheets, remain intact after amyloid formation. The tertiary structural information would be of great use for examining the quaternary structure of TTR amyloid.« less

Solid-State NMR Studies Reveal Native-like β-Sheet Structures in Transthyretin Amyloid

DOE PAGES

Lim, Kwang Hun; Dasari, Anvesh K. R.; Hung, Ivan; ...

2016-09-02

Structural characterization of amyloid rich in cross-β structures is crucial for unraveling the molecular basis of protein misfolding and amyloid formation associated with a wide range of human disorders. Elucidation of the β-sheet structure in noncrystalline amyloid has, however, remained an enormous challenge. Here we report structural analyses of the β-sheet structure in a full-length transthyretin amyloid using solid-state NMR spectroscopy. Magic-angle-spinning (MAS) solid-state NMR was employed to investigate native-like β-sheet structures in the amyloid state using selective labeling schemes for more efficient solid-state NMR studies. Analyses of extensive long-range 13 C- 13 C correlation MAS spectra obtained with selectivelymore » 13 CO- and 13 Cα-labeled TTR reveal that the two main β-structures in the native state, the CBEF and DAGH β-sheets, remain intact after amyloid formation. The tertiary structural information would be of great use for examining the quaternary structure of TTR amyloid.« less

A Bayesian Retrieval of Greenland Ice Sheet Internal Temperature from Ultra-wideband Software-defined Microwave Radiometer (UWBRAD) Measurements

NASA Astrophysics Data System (ADS)

Duan, Y.; Durand, M. T.; Jezek, K. C.; Yardim, C.; Bringer, A.; Aksoy, M.; Johnson, J. T.

2017-12-01

The ultra-wideband software-defined microwave radiometer (UWBRAD) is designed to provide ice sheet internal temperature product via measuring low frequency microwave emission. Twelve channels ranging from 0.5 to 2.0 GHz are covered by the instrument. A Greenland air-borne demonstration was demonstrated in September 2016, provided first demonstration of Ultra-wideband radiometer observations of geophysical scenes, including ice sheets. Another flight is planned for September 2017 for acquiring measurements in central ice sheet. A Bayesian framework is designed to retrieve the ice sheet internal temperature from simulated UWBRAD brightness temperature (Tb) measurements over Greenland flight path with limited prior information of the ground. A 1-D heat-flow model, the Robin Model, was used to model the ice sheet internal temperature profile with ground information. Synthetic UWBRAD Tb observations was generated via the partially coherent radiation transfer model, which utilizes the Robin model temperature profile and an exponential fit of ice density from Borehole measurement as input, and corrupted with noise. The effective surface temperature, geothermal heat flux, the variance of upper layer ice density, and the variance of fine scale density variation at deeper ice sheet were treated as unknown variables within the retrieval framework. Each parameter is defined with its possible range and set to be uniformly distributed. The Markov Chain Monte Carlo (MCMC) approach is applied to make the unknown parameters randomly walk in the parameter space. We investigate whether the variables can be improved over priors using the MCMC approach and contribute to the temperature retrieval theoretically. UWBRAD measurements near camp century from 2016 was also treated with the MCMC to examine the framework with scattering effect. The fine scale density fluctuation is an important parameter. It is the most sensitive yet highly unknown parameter in the estimation framework. Including the fine scale density fluctuation greatly improved the retrieval results. The ice sheet vertical temperature profile, especially the 10m temperature, can be well retrieved via the MCMC process. Future retrieval work will apply the Bayesian approach to UWBRAD airborne measurements.

15 CFR 705.6 - Confidential information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... EFFECT OF IMPORTED ARTICLES ON THE NATIONAL SECURITY § 705.6 Confidential information. (a) Any... the investigation that would disclose national security classified information or business... Security Classified” or “Business Confidential,” as appropriate, marked at the top of each sheet. Any...

Picture book support for preparing children ahead of and during day surgery.

PubMed

Nilsson, Elisabeth; Svensson, Gunnar; Frisman, Gunilla Hollman

2016-10-07

Aim To develop and evaluate the use of a specific picture book aiming to prepare children for anaesthesia and surgery. Methods An intervention comparing two different information methods before ear, nose and throat day surgery was performed. The intervention involved using a specific information sheet and a specific picture book. Parents (n=104) of children aged 2-12 years completed open-ended questions that were analysed with qualitative content analysis. They were divided into two groups: one group received routine information and one received routine information and the intervention. Findings The picture sheet and picture book were valuable aids to prepare small children for anaesthesia and surgery by explaining the procedures that would take place. The parents expressed that knowledge of the procedures made them and the child feel secure. Conclusion Peri-operative information through pictures supports children and their parents during day surgery and may be helpful in future healthcare visits.

DTPA (Diethylenetriamine pentaacetate)

MedlinePlus

... Your Health Possible Health Effects Contamination and Exposure Acute Radiation Syndrome (ARS) Cutaneous Radiation Injury (CRI) Cancer and Long- ... Information for Professionals Radiation Thermometer Information for ... Radiation Syndrome: A Fact Sheet for Clinicians Cutaneous Radiation Injury ( ...

Contamination vs. Exposure

MedlinePlus

... Your Health Possible Health Effects Contamination and Exposure Acute Radiation Syndrome (ARS) Cutaneous Radiation Injury (CRI) Cancer and Long- ... Information for Professionals Radiation Thermometer Information for ... Radiation Syndrome: A Fact Sheet for Clinicians Cutaneous Radiation Injury ( ...

Potassium Iodide (KI)

MedlinePlus

... Your Health Possible Health Effects Contamination and Exposure Acute Radiation Syndrome (ARS) Cutaneous Radiation Injury (CRI) Cancer and Long- ... Information for Professionals Radiation Thermometer Information for ... Radiation Syndrome: A Fact Sheet for Clinicians Cutaneous Radiation Injury ( ...

Applications of Future NASA Decadal Missions for Observing Earth's Land and Water Processes

NASA Technical Reports Server (NTRS)

Luvall, Jeffrey C.; Hook, Simon; Brown, Molly E.; Tzortziou, Maria A.; Carroll, Mark; Escobar, Vanessa M.; Omar, Ali

2013-01-01

Misson Objective: To collect altimetry data of the Earth's surface optimized to measure ice sheet elevation change and sea ice thickness, while also generating an estimate of global vegetation biomass.

A pilot study of simple interventions to improve informed consent in clinical research: feasibility, approach, and results.

PubMed

Kass, Nancy E; Taylor, Holly A; Ali, Joseph; Hallez, Kristina; Chaisson, Lelia

2015-02-01

Research suggests that participants do not always adequately understand studies. While some consent interventions increase understanding, methodologic challenges have been raised in studying consent outside of actual trial settings. This study examined the feasibility of testing two consent interventions in actual studies and measured effectiveness of interventions in improving understanding. Participants enrolling in any of eight ongoing clinical trials were sequentially assigned to one of three different informed consent strategies for enrollment in their clinical trial. Control participants received standard consent procedures for their trial. Participants in the first intervention arm received a bulleted fact sheet summarizing key study information. Participants in the second intervention arm received the bulleted fact sheet and also engaged in a feedback Q&A session. Later, patients answered closed- and open-ended questions to assess patient understanding and literacy. Descriptive statistics, Wilcoxon -Mann -Whitney and Kruskal-Wallis tests were generated to assess correlations; regression analysis determined predictors of understanding. 144 participants enrolled. Using regression analysis, participants receiving the second intervention scored 7.6 percentage points higher (p = .02) on open-ended questions about understanding than participants in the control, although unadjusted comparisons did not reach statistical significance. Our study supports the hypothesis that patients receiving both bulleted fact sheets and a Q&A session had higher understanding compared to standard consent. Fact sheets and short structured dialog are quick to administer and easy to replicate across studies and should be tested in larger samples. © The Author(s) 2014.

Measurements and computational analysis of heat transfer and flow in a simulated turbine blade internal cooling passage

NASA Technical Reports Server (NTRS)

Russell, Louis M.; Thurman, Douglas R.; Simonyi, Patricia S.; Hippensteele, Steven A.; Poinsatte, Philip E.

1993-01-01

Visual and quantitative information was obtained on heat transfer and flow in a branched-duct test section that had several significant features of an internal cooling passage of a turbine blade. The objective of this study was to generate a set of experimental data that could be used to validate computer codes for internal cooling systems. Surface heat transfer coefficients and entrance flow conditions were measured at entrance Reynolds numbers of 45,000, 335,000, and 726,000. The heat transfer data were obtained using an Inconel heater sheet attached to the surface and coated with liquid crystals. Visual and quantitative flow field results using particle image velocimetry were also obtained for a plane at mid channel height for a Reynolds number of 45,000. The flow was seeded with polystyrene particles and illuminated by a laser light sheet. Computational results were determined for the same configurations and at matching Reynolds numbers; these surface heat transfer coefficients and flow velocities were computed with a commercially available code. The experimental and computational results were compared. Although some general trends did agree, there were inconsistencies in the temperature patterns as well as in the numerical results. These inconsistencies strongly suggest the need for further computational studies on complicated geometries such as the one studied.

Making the Case: A Fact Sheet on Children and Youth in Out-of-School Time

ERIC Educational Resources Information Center

National Institute on Out of School Time, 2005

2005-01-01

This fact sheet resource is packed with the latest research and information on how children and youth spend their non-school hours, how they benefit from afterschool activities and much more. Sections include: (1) Children and youth today; (2) Health and well-being; (3) Children and youth spend time after school in a variety of ways; (4) Children…

Nairobi Forward-looking Strategies for the Advancement of Women: Issues and the Canadian Situation. Fact Sheets--1992 Update.

ERIC Educational Resources Information Center

Status of Women Canada, Ottawa (Ontario).

The 1992 edition of the fact sheets provides information on new and revised Canadian government programs and policies about the implementation of the Nairobi Forward-looking Strategies for the Advancement of Women program that were adopted at the United Nations World Conference on Women in Kenya in 1985. This edition continues to address the…

"The Very First Family": A Musical Play by Philip Hall, Based on Stories by Rudyard Kipling. Cue Sheet for Teachers.

ERIC Educational Resources Information Center

Flynn, Rosalind

Designed to be used before and after attending a performance of the musical play "The Very First Family" (in which a Stone Age family and their neighbors bring three of Rudyard Kipling's stories to life), this cue sheet for teachers presents information about the performance and suggests classroom activities. The activities in the cue…

Mammography with and without radiolucent positioning sheets: Comparison of projected breast area, pain experience, radiation dose and technical image quality.

PubMed

Timmers, Janine; Voorde, Marloes Ten; Engen, Ruben E van; Landsveld-Verhoeven, Cary van; Pijnappel, Ruud; Greve, Kitty Droogh-de; Heeten, Gerard J den; Broeders, Mireille J M

2015-10-01

To compare projected breast area, image quality, pain experience and radiation dose between mammography performed with and without radiolucent positioning sheets. 184 women screened in the Dutch breast screening programme (May-June 2012) provided written informed consent to have one additional image taken with positioning sheets. 5 cases were excluded (missing data). Pain was scored using the Numeric Rating Scale. Radiation dose was estimated using the Dance model and projected breast area using computer software. Two radiologists and two radiographers assessed image quality. With positioning sheets significantly more pectoral muscle, lateral and medial breast tissue was projected (CC-views) and more and deeper depicted pectoral muscle (MLO-views). In contrast, visibility of white and darker areas was better on images without positioning sheets, radiologists were therefore better able to detect abnormalities (MLO-views). Women experienced more pain with positioning sheets (MLO-views only, mean difference NRS 0.98; SD 1.71; p=0,00). Mammograms with positioning sheets showed more breast tissue. Increased breast thickness after compression with sheets resulted in less visibility of white and darker areas and thus reduced detection of abnormalities. Also, women experienced more pain (MLO-views) due to the sheet material. A practical consideration is the fact that more subcutaneous fat tissue and skin are being pulled forward leading to folds in the nipple area. On balance, improvement to the current design is required before implementation in screening practice can be considered. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Design, assembly, and metrology of an oil-immersion microscope objective with long working distance

NASA Astrophysics Data System (ADS)

Peng, Wei-Jei; Lin, Wen-Lung; Kuo, Hui-Jean; Ho, Cheng-Fang; Hsu, Wei-Yao

2016-10-01

The design, tolerance sensitivity reduction, assembly, and optical bench test for an oil-immersion microscope objective with long working distance employed in a lattice light-sheet microscope is presented in this paper. In this application, the orthogonal excitation and detection objectives are dipped in an oil medium. The excitation objective focuses the incident laser beam to generate fluorescence on specimen for collecting by detection objective. The excitation objective is custom-designed to meet the requirement specification such as oil-immersion, the long working distance, and numerical aperture (NA) of 0.5, etc. To produce an acceptable point spread function (PSF) for effective excitation, the performance of the objective needs to be close to diffraction limit. Because the tolerance of the modulation transfer function (MTF) is more and more sensitive at higher spatial frequency, it is extremely critical to keep the performance after manufacture. Consequently, an insensitive optical design is very important for relaxing tolerance. We compare the design with and without tolerance sensitivity reduction, and the as-built MTF shows the result. Furthermore, the method for sensitivity reduction is presented. The opto-mechanical design and assembly method are also discussed. Eventually, the objective with five spherical lenses was fabricated. In optical bench test, the depth of the oil is sensitive to MTF, and it leads to the complicated adjustment. For solving this issue, we made an index-matching lens to replace oil for measurement easily. Finally, the measured MTF of the excitation objective can accomplish the requirement specification and successfully employed in a lattice light-sheet microscope.

ITP E-Bulletin

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This fact sheet provides information about how to subscribe to the ITP E-Bulletin. The E-Bulletin provides a way to keep abreast of the latest news, information, R&D, funding opportunities, and events available through the program.

Ovarian Cancer Fact Sheet

MedlinePlus

... information Stay Connected Blog Contact us Media inquiries Social media About Us Who we are What we do ... information Stay Connected Blog Contact us Media inquiries Social media Subscribe to receive OWH updates Submit HHS Non- ...

Uterine Fibroids Fact Sheet

MedlinePlus

... information Stay Connected Blog Contact us Media inquiries Social media About Us Who we are What we do ... information Stay Connected Blog Contact us Media inquiries Social media Subscribe to receive OWH updates Submit HHS Non- ...

Myasthenia Gravis Fact Sheet

MedlinePlus

... information Stay Connected Blog Contact us Media inquiries Social media About Us Who we are What we do ... information Stay Connected Blog Contact us Media inquiries Social media Subscribe to receive OWH updates Submit HHS Non- ...

Guillain-Barré Syndrome Fact Sheet

MedlinePlus

... their original function can be regained. Occupational and vocational therapy help individuals learn new ways to handle ... Are Funded Small Business Grants Overview Areas of Interest Budget Information Grant Timeline Award Information Entrepreneurial Resources ...

Variability of Surface Temperature and Melt on the Greenland Ice Sheet, 2000-2011

NASA Technical Reports Server (NTRS)

Hall, Dorothy K.; Comiso, Josefino, C.; Shuman, Christopher A.; Koenig, Lora S.; DiGirolamo, Nicolo E.

2012-01-01

Enhanced melting along with surface-temperature increases measured using infrared satellite data, have been documented for the Greenland Ice Sheet. Recently we developed a climate-quality data record of ice-surface temperature (IST) of the Greenland Ice Sheet using the Moderate-Resolution Imaging Spectroradiometer (MODIS) 1ST product -- http://modis-snow-ice.gsfc.nasa.gov. Using daily and mean monthly MODIS 1ST maps from the data record we show maximum extent of melt for the ice sheet and its six major drainage basins for a 12-year period extending from March of 2000 through December of 2011. The duration of the melt season on the ice sheet varies in different drainage basins with some basins melting progressively earlier over the study period. Some (but not all) of the basins also show a progressively-longer duration of melt. The short time of the study period (approximately 12 years) precludes an evaluation of statistically-significant trends. However the dataset provides valuable information on natural variability of IST, and on the ability of the MODIS instrument to capture changes in IST and melt conditions indifferent drainage basins of the ice sheet.

Long term ice sheet mass change rates and inter-annual variability from GRACE gravimetry.

NASA Astrophysics Data System (ADS)

Harig, C.

2017-12-01

The GRACE time series of gravimetry now stretches 15 years since its launch in 2002. Here we use Slepian functions to estimate the long term ice mass trends of Greenland, Antarctica, and several glaciated regions. The spatial representation shows multi-year to decadal regional shifts in accelerations, in agreement with increases in radar derived ice velocity. Interannual variations in ice mass are of particular interest since they can directly link changes in ice sheets to the drivers of change in the polar ocean and atmosphere. The spatial information retained in Slepian functions provides a tool to determine how this link varies in different regions within an ice sheet. We present GRACE observations of the 2013-2014 slowdown in mass loss of the Greenland ice sheet, which was concentrated in specific parts of the ice sheet and in certain months of the year. We also discuss estimating the relative importance of climate factors that control ice mass balance, as a function of location of the glacier/ice cap as well as the spatial variation within an ice sheet by comparing gravimetry with observations of surface air temperature, ocean temperature, etc. as well as model data from climate reanalysis products.

Use of a spread sheet to calculate the current-density distribution produced in human and rat models by low-frequency electric fields.

PubMed

Hart, F X

1990-01-01

The current-density distribution produced inside irregularly shaped, homogeneous human and rat models by low-frequency electric fields is obtained by a two-stage finite-difference procedure. In the first stage the model is assumed to be equipotential. Laplace's equation is solved by iteration in the external region to obtain the capacitive-current densities at the model's surface elements. These values then provide the boundary conditions for the second-stage relaxation solution, which yields the internal current-density distribution. Calculations were performed with the Excel spread-sheet program on a Macintosh-II microcomputer. A spread sheet is a two-dimensional array of cells. Each cell of the sheet can represent a square element of space. Equations relating the values of the cells can represent the relationships between the potentials in the corresponding spatial elements. Extension to three dimensions is readily made. Good agreement was obtained with current densities measured on human models with both, one, or no legs grounded and on rat models in four different grounding configurations. The results also compared well with predictions of more sophisticated numerical analyses. Spread sheets can provide an inexpensive and relatively simple means to perform good, approximate dosimetric calculations on irregularly shaped objects.

Electrophoretic deposition of fluorescent Cu and Au sheets for light-emitting diodes

NASA Astrophysics Data System (ADS)

Liu, Jiale; Wu, Zhennan; Li, Tingting; Zhou, Ding; Zhang, Kai; Sheng, Yu; Cui, Jianli; Zhang, Hao; Yang, Bai

2015-12-01

Electrophoretic deposition (EPD) is a conventional method for fabricating film materials from nanometer-sized building blocks, and exhibits the advantages of low-cost, high-efficiency, wide-range thickness adjustment, and uniform deposition. Inspired by the interest in the application of two-dimensional (2D) nanomaterials, the EPD technique has been recently extended to building blocks with 2D features. However, the studies are mainly focused on simplex building blocks. The utilization of multiplex building blocks is rarely reported. In this work, we demonstrate a controlled EPD of Cu and Au sheets, which are 2D assemblies of luminescent Cu and Au nanoclusters. Systematic investigations reveal that both the deposition efficiency and the thickness are determined by the lateral size of the sheets. For Cu sheets with a large lateral size, a high ζ-potential and strong face-to-face van der Waals interactions facilitate the deposition with high efficiency. However, for Au sheets, the small lateral size and ζ-potential limit the formation of a thick film. To solve this problem, the deposition dynamics are controlled by increasing the concentration of the Au sheets and adding acetone. This understanding permits the fabrication of a binary EPD film by the stepwise deposition of Cu and Au sheets, thus producing a luminescent film with both Cu green emission and Au red emission. A white light-emitting diode prototype with color coordinates (x, y) = (0.31, 0.36) is fabricated by employing the EPD film as a color conversion layer on a 365 nm GaN clip and further tuning the amount of deposited Cu and Au sheets.Electrophoretic deposition (EPD) is a conventional method for fabricating film materials from nanometer-sized building blocks, and exhibits the advantages of low-cost, high-efficiency, wide-range thickness adjustment, and uniform deposition. Inspired by the interest in the application of two-dimensional (2D) nanomaterials, the EPD technique has been recently extended to building blocks with 2D features. However, the studies are mainly focused on simplex building blocks. The utilization of multiplex building blocks is rarely reported. In this work, we demonstrate a controlled EPD of Cu and Au sheets, which are 2D assemblies of luminescent Cu and Au nanoclusters. Systematic investigations reveal that both the deposition efficiency and the thickness are determined by the lateral size of the sheets. For Cu sheets with a large lateral size, a high ζ-potential and strong face-to-face van der Waals interactions facilitate the deposition with high efficiency. However, for Au sheets, the small lateral size and ζ-potential limit the formation of a thick film. To solve this problem, the deposition dynamics are controlled by increasing the concentration of the Au sheets and adding acetone. This understanding permits the fabrication of a binary EPD film by the stepwise deposition of Cu and Au sheets, thus producing a luminescent film with both Cu green emission and Au red emission. A white light-emitting diode prototype with color coordinates (x, y) = (0.31, 0.36) is fabricated by employing the EPD film as a color conversion layer on a 365 nm GaN clip and further tuning the amount of deposited Cu and Au sheets. Electronic supplementary information (ESI) available: Additional experimental information, and SEM images of Cu EPD films. See DOI: 10.1039/c5nr06599b

Dip coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project

NASA Technical Reports Server (NTRS)

Heaps, J. D.; Maciolek, R. B.; Zook, J. D.; Harrison, W. B.; Scott, M. W.; Hendrickson, G.; Wolner, H. A.; Nelson, L. D.; Schuller, T. L.; Peterson, A. A.

1976-01-01

The technical and economic feasibility of producing solar cell quality sheet silicon by dip-coating one surface of carbonized ceramic substrates with a thin layer of large grain polycrystalline silicon was investigated. The dip-coating methods studied were directed toward a minimum cost process with the ultimate objective of producing solar cells with a conversion efficiency of 10% or greater. The technique shows excellent promise for low cost, labor-saving, scale-up potentialities and would provide an end product of sheet silicon with a rigid and strong supportive backing. An experimental dip-coating facility was designed and constructed, several substrates were successfully dip-coated with areas as large as 25 sq cm and thicknesses of 12 micron to 250 micron. There appears to be no serious limitation on the area of a substrate that could be coated. Of the various substrate materials dip-coated, mullite appears to best satisfy the requirement of the program. An inexpensive process was developed for producing mullite in the desired geometry.

Frustules to fragments, diatoms to dust: How degradation of microfossil shape and microstructures can teach us how ice sheets work

USGS Publications Warehouse

Scherer, R.P.; Sjunneskog, C.M.; Iverson, M.R.; Hooyer, T.S.

2005-01-01

In a laboratory experiment we investigated micro- and nanoscale changes in fossil diatom valves and in the texture of diatomaceous sediments that result from ice sheet overburden and subglacial shearing. Our experiment included compression and shearing of Antarctic diatom-rich sediments in a ring shear device and comparison of experimental samples with natural glacial sediments from the Antarctic continental shelf. The purpose of the experiment is to establish objective criteria for analyzing subglacial processes and interpreting the origin of glacial-geologic features on the Antarctic continental shelf. We find distinct changes resulting from different glacial settings, with respect to whole diatom frustules, diatom micromorphology, and microtextural properties of sedimentary units. By providing constraints on subglacial shearing, these observations of genetically controlled micro- and nanoscale diatom structures and architecture are contributing to the understanding of large-scale glacial processes, aiding the development of models of modern ice sheet processes, and guiding interpretation of past ice sheet configurations. Copyright ?? 2005 American Scientific Publishers. All rights reserved.

Influence of compost covers on the efficiency of biowaste composting process.

PubMed

Marešová, Karolina; Kollárová, Mária

2010-12-01

The temperature of matured compost is an indicator of feedstock quality and also a good feedback informing about the suitability of an applied technological procedure. Two independent experiments using the technology of windrow composting at open area were conducted with the final goal to evaluate the effect of compost pile covering (in comparison with uncovered piles) on the course of composting process - behaviour of temperature over time and oxygen content. Two types of sheets were used - Top Tex permeable sheet and impermeable polyethylene sheet. The experiment I (summer months) aimed at comparison of efficiency between the Top Tex sheet cover and the uncovered compost piles, while experiment II (autumn months) compared treatments using the Top Tex sheet and polyethylene sheet by contrast. Within the experiment I the composts consisted of cattle slurry and fresh grass matter at a ratio of 1:1, in case of experiment II consisted of pig/cattle manure, fresh grass matter and chipped material at a ratio of about 1:2:1. The obtained data showed no significant differences among the cover treatments according to ANOVA. The only exception was oxygen content in pile 4 (experiment II) under Top Tex sheet, where a markedly higher oxygen content than under polyethylene sheet was measured during the whole composting period. It was the only case where statistical analysis proved a significant difference; the p-value was 0.0002. Copyright © 2010. Published by Elsevier Ltd.

Educational use assessment of Geomorphosites applied to the Picos de Europa National Park (Northern Spain)

NASA Astrophysics Data System (ADS)

Bazán, Héctor; Serrano, Enrique; Ruiz-Flaño, Purificación

2014-05-01

There are sites that constitute worthy places of preservation or promotion the natural heritage receiving different names according to the object of interest (biological, geological, hydrological, geomorphological, etc.). National parks are places for everybody to learn about abiotic and biotic nature and the way they rely on each other. The abiotic nature implies different parts, as geologic, hydrologic or geomorphologic. The geomorphosites are especially relevant because link geology, climate, surface processes and hydrology with landscape. Beyond the intrinsic scientific, conservation or scenic values, such sites possess a general value being the didactic use one of the aspects considered in the assessment methods. Several authors have indicated that the aim of the evaluation of sites will change if the purpose is leaning to inventories development, environmental impact assessment or divulgation (educational, tourist activities or only protection). One of the meanings of the term educational is "everything suitable to teaching or providing education" as is referred in dictionaries. With this definition, although the geomorphosites has not an educational value per se, any natural element can be used as educational object, and the teacher intention's must transform a geomorphosite in a educational resource. The educational assessment of several methods have been analysed in this work and we have concluded that there are confusing and inaccurate for teaching purposes. The analysed methods do not specify how the geomorphosites are useful for teaching or how the teacher can develop the scholar programs. The objective is a more accuracy in the educational use of geomorphosites focused on the different educational levels as a tool by teaching and leisure activities. Our proposal is the development of methodological sheets that emerge from the analysis of the curricular content and specific bibliography. Sheets on general geomorphology, periglacial, glacial and karst information have been applied after assess 51 geomorphosites in Picos de Europa. Applying the accessibility criteria, 15 geomorphosites have an educational value and so the educational assessment has been made. Each geomorphosite shows educational qualities for different topics and educational or leisure levels, all of them based in experiential education. The educational assessment sheets of geomorphosites allow greater accuracy of the didactic use in the National Park of the Picos de Europa and they are a tool to be used in the teaching task as well as leisure activities. The results permit to make use of the relief in educational curricula and develop leisure strategies to divulgation and interpretation of geomorphosites in NPA.

Exploring the relative boundaries of the patchy pulsating aurora

NASA Astrophysics Data System (ADS)

Carlisle, E.; Donovan, E.; Jackel, B. J.

2017-12-01

Pulsating aurora is a common auroral feature that occurs most frequently on the nightside, in the equatorward part of the auroral oval. It is caused by pitch angle scattering of electrons due to wave-particle interactions near the equatorial plane. As such, observations of pulsating aurora provide information about the distribution of the plasma waves in the magnetosphere. Anecdotal evidence suggests that pulsating aurora occur equatorward of the proton aurora, and hence in the largely dipolar region at or inside the inner edge of the plasma sheet. Here we present results of a statistical survey of photometer observations of proton aurora and simultaneous all-sky imager observations of electron aurora. Our objective is to provide a definitive statement regarding the location of pulsating aurora relative to the proton aurora.