Obstacle Detection Algorithms for Rotorcraft Navigation

NASA Technical Reports Server (NTRS)

Kasturi, Rangachar; Camps, Octavia I.; Huang, Ying; Narasimhamurthy, Anand; Pande, Nitin; Ahumada, Albert (Technical Monitor)

2001-01-01

In this research we addressed the problem of obstacle detection for low altitude rotorcraft flight. In particular, the problem of detecting thin wires in the presence of image clutter and noise was studied. Wires present a serious hazard to rotorcrafts. Since they are very thin, their detection early enough so that the pilot has enough time to take evasive action is difficult, as their images can be less than one or two pixels wide. After reviewing the line detection literature, an algorithm for sub-pixel edge detection proposed by Steger was identified as having good potential to solve the considered task. The algorithm was tested using a set of images synthetically generated by combining real outdoor images with computer generated wire images. The performance of the algorithm was evaluated both, at the pixel and the wire levels. It was observed that the algorithm performs well, provided that the wires are not too thin (or distant) and that some post processing is performed to remove false alarms due to clutter.

Robust obstacle detection for unmanned surface vehicles

NASA Astrophysics Data System (ADS)

Qin, Yueming; Zhang, Xiuzhi

2018-03-01

Obstacle detection is of essential importance for Unmanned Surface Vehicles (USV). Although some obstacles (e.g., ships, islands) can be detected by Radar, there are many other obstacles (e.g., floating pieces of woods, swimmers) which are difficult to be detected via Radar because these obstacles have low radar cross section. Therefore, detecting obstacle from images taken onboard is an effective supplement. In this paper, a robust vision-based obstacle detection method for USVs is developed. The proposed method employs the monocular image sequence captured by the camera on the USVs and detects obstacles on the sea surface from the image sequence. The experiment results show that the proposed scheme is efficient to fulfill the obstacle detection task.

Application of Optical Flow Sensors for Dead Reckoning, Heading Reference, Obstacle Detection, and Obstacle Avoidance

DTIC Science & Technology

2015-09-01

OPTICAL FLOW SENSORS FOR DEAD RECKONING, HEADING REFERENCE, OBSTACLE DETECTION, AND OBSTACLE AVOIDANCE by Tarek M. Nejah September 2015...SENSORS FOR DEAD RECKONING, HEADING REFERENCE, OBSTACLE DETECTION, AND OBSTACLE AVOIDANCE 5. FUNDING NUMBERS 6. AUTHOR(S) Nejah, Tarek M. 7...DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) A novel approach for dead reckoning, heading reference, obstacle detection, and obstacle

Research on detection method of UAV obstruction based on binocular vision

NASA Astrophysics Data System (ADS)

Zhu, Xiongwei; Lei, Xusheng; Sui, Zhehao

2018-04-01

For the autonomous obstacle positioning and ranging in the process of UAV (unmanned aerial vehicle) flight, a system based on binocular vision is constructed. A three-stage image preprocessing method is proposed to solve the problem of the noise and brightness difference in the actual captured image. The distance of the nearest obstacle is calculated by using the disparity map that generated by binocular vision. Then the contour of the obstacle is extracted by post-processing of the disparity map, and a color-based adaptive parameter adjustment algorithm is designed to extract contours of obstacle automatically. Finally, the safety distance measurement and obstacle positioning during the UAV flight process are achieved. Based on a series of tests, the error of distance measurement can keep within 2.24% of the measuring range from 5 m to 20 m.

Path planning of decentralized multi-quadrotor based on fuzzy-cell decomposition algorithm

NASA Astrophysics Data System (ADS)

Iswanto, Wahyunggoro, Oyas; Cahyadi, Adha Imam

2017-04-01

The paper aims to present a design algorithm for multi quadrotor lanes in order to move towards the goal quickly and avoid obstacles in an area with obstacles. There are several problems in path planning including how to get to the goal position quickly and avoid static and dynamic obstacles. To overcome the problem, therefore, the paper presents fuzzy logic algorithm and fuzzy cell decomposition algorithm. Fuzzy logic algorithm is one of the artificial intelligence algorithms which can be applied to robot path planning that is able to detect static and dynamic obstacles. Cell decomposition algorithm is an algorithm of graph theory used to make a robot path map. By using the two algorithms the robot is able to get to the goal position and avoid obstacles but it takes a considerable time because they are able to find the shortest path. Therefore, this paper describes a modification of the algorithms by adding a potential field algorithm used to provide weight values on the map applied for each quadrotor by using decentralized controlled, so that the quadrotor is able to move to the goal position quickly by finding the shortest path. The simulations conducted have shown that multi-quadrotor can avoid various obstacles and find the shortest path by using the proposed algorithms.

Untreated Peristomal Skin Complications among Long-Term Colorectal Cancer Survivors with Ostomies: Lessons from a Study of Family Caregiving

PubMed Central

McMullen, Carmit K.; Wasserman, Joseph; Altschuler, Andrea; Grant, Marcia; Hornbrook, Mark C.; Liljestrand, Petra; Briggs, Catherine; Krouse, Robert S.

2013-01-01

This ethnography of family caregiving explored why peristomal skin complications are both common and undertreated among colorectal cancer (CRC) survivors with intestinal ostomies. We sought to identify factors that hinder or facilitate prompt detection and treatment of ostomy and skin problems. We collected data through in-depth interviews with 31 cancer survivors and their family caregivers, fieldwork, structured assessments, and medical records review. We analyzed data using qualitative theme and matrix analyses. We found that survivors who received help changing the skin barrier around their stoma had fewer obstacles to detection and treatment of peristomal skin complications. Half of the survivors received unpaid help with ostomy care. All such help came from spouses. Married couples who collaborated in ostomy care reported that having assistance in placing the ostomy appliance helped with preventing leaks, detecting skin changes, and modifying ostomy care routines. Survivors who struggled to manage ostomy care independently reported more obstacles to alleviating and seeking treatment for skin problems. Nurses who encounter CRC survivors with ostomies can improve treatment of peristomal skin problems by asking patients and caregivers about ostomy care and skin problems, examining the peristomal area, and facilitating routine checkups with a wound, ostomy and continence nurse. PMID:22119975

Learned navigation in unknown terrains: A retraction method

NASA Technical Reports Server (NTRS)

Rao, Nageswara S. V.; Stoltzfus, N.; Iyengar, S. Sitharama

1989-01-01

The problem of learned navigation of a circular robot R, of radius delta (is greater than or equal to 0), through a terrain whose model is not a-priori known is considered. Two-dimensional finite-sized terrains populated by an unknown (but, finite) number of simple polygonal obstacles are also considered. The number and locations of the vertices of each obstacle are unknown to R. R is equipped with a sensor system that detects all vertices and edges that are visible from its present location. In this context two problems are covered. In the visit problem, the robot is required to visit a sequence of destination points, and in the terrain model acquisition problem, the robot is required to acquire the complete model of the terrain. An algorithmic framework is presented for solving these two problems using a retraction of the freespace onto the Voronoi diagram of the terrain. Algorithms are then presented to solve the visit problem and the terrain model acquisition problem.

A stereo vision-based obstacle detection system in vehicles

NASA Astrophysics Data System (ADS)

Huh, Kunsoo; Park, Jaehak; Hwang, Junyeon; Hong, Daegun

2008-02-01

Obstacle detection is a crucial issue for driver assistance systems as well as for autonomous vehicle guidance function and it has to be performed with high reliability to avoid any potential collision with the front vehicle. The vision-based obstacle detection systems are regarded promising for this purpose because they require little infrastructure on a highway. However, the feasibility of these systems in passenger car requires accurate and robust sensing performance. In this paper, an obstacle detection system using stereo vision sensors is developed. This system utilizes feature matching, epipoplar constraint and feature aggregation in order to robustly detect the initial corresponding pairs. After the initial detection, the system executes the tracking algorithm for the obstacles. The proposed system can detect a front obstacle, a leading vehicle and a vehicle cutting into the lane. Then, the position parameters of the obstacles and leading vehicles can be obtained. The proposed obstacle detection system is implemented on a passenger car and its performance is verified experimentally.

Particle Filtering for Obstacle Tracking in UAS Sense and Avoid Applications

PubMed Central

Moccia, Antonio

2014-01-01

Obstacle detection and tracking is a key function for UAS sense and avoid applications. In fact, obstacles in the flight path must be detected and tracked in an accurate and timely manner in order to execute a collision avoidance maneuver in case of collision threat. The most important parameter for the assessment of a collision risk is the Distance at Closest Point of Approach, that is, the predicted minimum distance between own aircraft and intruder for assigned current position and speed. Since assessed methodologies can cause some loss of accuracy due to nonlinearities, advanced filtering methodologies, such as particle filters, can provide more accurate estimates of the target state in case of nonlinear problems, thus improving system performance in terms of collision risk estimation. The paper focuses on algorithm development and performance evaluation for an obstacle tracking system based on a particle filter. The particle filter algorithm was tested in off-line simulations based on data gathered during flight tests. In particular, radar-based tracking was considered in order to evaluate the impact of particle filtering in a single sensor framework. The analysis shows some accuracy improvements in the estimation of Distance at Closest Point of Approach, thus reducing the delay in collision detection. PMID:25105154

Combating the drug-impaired driver : a prescription for safer highways.

DOT National Transportation Integrated Search

1985-01-01

In recent years, the Commonwealth of Virginia has increased its efforts to improve highway safety by combating the problems created by drunken drivers. However, law enforcement officials still face major obstacles in their efforts to detect and prose...

The "EyeCane", a new electronic travel aid for the blind: Technology, behavior & swift learning.

PubMed

Maidenbaum, Shachar; Hanassy, Shlomi; Abboud, Sami; Buchs, Galit; Chebat, Daniel-Robert; Levy-Tzedek, Shelly; Amedi, Amir

2014-01-01

Independent mobility is one of the most pressing problems facing people who are blind. We present the EyeCane, a new mobility aid aimed at increasing perception of environment beyond what is provided by the traditional White Cane for tasks such as distance estimation, navigation and obstacle detection. The "EyeCane" enhances the traditional White Cane by using tactile and auditory output to increase detectable distance and angles. It circumvents the technical pitfalls of other devices, such as weight, short battery life, complex interface schemes, and slow learning curve. It implements multiple beams to enables detection of obstacles at different heights, and narrow beams to provide active sensing that can potentially increase the user's spatial perception of the environment. Participants were tasked with using the EyeCane for several basic tasks with minimal training. Blind and blindfolded-sighted participants were able to use the EyeCane successfully for distance estimation, simple navigation and simple obstacle detection after only several minutes of training. These results demonstrate the EyeCane's potential for mobility rehabilitation. The short training time is especially important since available mobility training resources are limited, not always available, and can be quite expensive and/or entail long waiting periods.

Virtual reality-based navigation task to reveal obstacle avoidance performance in individuals with visuospatial neglect.

PubMed

Aravind, Gayatri; Darekar, Anuja; Fung, Joyce; Lamontagne, Anouk

2015-03-01

Persons with post-stroke visuospatial neglect (VSN) often collide with moving obstacles while walking. It is not well understood whether the collisions occur as a result of attentional-perceptual deficits caused by VSN or due to post-stroke locomotor deficits. We assessed individuals with VSN on a seated, joystick-driven obstacle avoidance task, thus eliminating the influence of locomotion. Twelve participants with VSN were tested on obstacle detection and obstacle avoidance tasks in a virtual environment that included three obstacles approaching head-on or 30 (°) contralesionally/ipsilesionally. Our results indicate that in the detection task, the contralesional and head-on obstacles were detected at closer proximities compared to the ipsilesional obstacle. For the avoidance task collisions were observed only for the contralesional and head-on obstacle approaches. For the contralesional obstacle approach, participants initiated their avoidance strategies at smaller distances from the obstacle and maintained smaller minimum distances from the obstacles. The distance at detection showed a negative association with the distance at the onset of avoidance strategy for all three obstacle approaches. We conclusion the observation of collisions with contralesional and head-on obstacles, in the absence of locomotor burden, provides evidence that attentional-perceptual deficits due to VSN, independent of post-stroke locomotor deficits, alter obstacle avoidance abilities.

Inertial navigation sensor integrated obstacle detection system

NASA Technical Reports Server (NTRS)

Bhanu, Bir (Inventor); Roberts, Barry A. (Inventor)

1992-01-01

A system that incorporates inertial sensor information into optical flow computations to detect obstacles and to provide alternative navigational paths free from obstacles. The system is a maximally passive obstacle detection system that makes selective use of an active sensor. The active detection typically utilizes a laser. Passive sensor suite includes binocular stereo, motion stereo and variable fields-of-view. Optical flow computations involve extraction, derotation and matching of interest points from sequential frames of imagery, for range interpolation of the sensed scene, which in turn provides obstacle information for purposes of safe navigation.

Detection of Obstacles in Monocular Image Sequences

NASA Technical Reports Server (NTRS)

Kasturi, Rangachar; Camps, Octavia

1997-01-01

The ability to detect and locate runways/taxiways and obstacles in images captured using on-board sensors is an essential first step in the automation of low-altitude flight, landing, takeoff, and taxiing phase of aircraft navigation. Automation of these functions under different weather and lighting situations, can be facilitated by using sensors of different modalities. An aircraft-based Synthetic Vision System (SVS), with sensors of different modalities mounted on-board, complements the current ground-based systems in functions such as detection and prevention of potential runway collisions, airport surface navigation, and landing and takeoff in all weather conditions. In this report, we address the problem of detection of objects in monocular image sequences obtained from two types of sensors, a Passive Millimeter Wave (PMMW) sensor and a video camera mounted on-board a landing aircraft. Since the sensors differ in their spatial resolution, and the quality of the images obtained using these sensors is not the same, different approaches are used for detecting obstacles depending on the sensor type. These approaches are described separately in two parts of this report. The goal of the first part of the report is to develop a method for detecting runways/taxiways and objects on the runway in a sequence of images obtained from a moving PMMW sensor. Since the sensor resolution is low and the image quality is very poor, we propose a model-based approach for detecting runways/taxiways. We use the approximate runway model and the position information of the camera provided by the Global Positioning System (GPS) to define regions of interest in the image plane to search for the image features corresponding to the runway markers. Once the runway region is identified, we use histogram-based thresholding to detect obstacles on the runway and regions outside the runway. This algorithm is tested using image sequences simulated from a single real PMMW image.

Data acquisition and path selection decision making for an autonomous roving vehicle. [laser pointing control system for vehicle guidance

NASA Technical Reports Server (NTRS)

Shen, C. N.; YERAZUNIS

1979-01-01

The feasibility of using range/pointing angle data such as might be obtained by a laser rangefinder for the purpose of terrain evaluation in the 10-40 meter range on which to base the guidance of an autonomous rover was investigated. The decision procedure of the rapid estimation scheme for the detection of discrete obstacles has been modified to reinforce the detection ability. With the introduction of the logarithmic scanning scheme and obstacle identification scheme, previously developed algorithms are combined to demonstrate the overall performance of the intergrated route designation system using laser rangefinder. In an attempt to cover a greater range, 30 m to 100 mm, the problem estimating gradients in the presence of positioning angle noise at middle range is investigated.

A method of real-time detection for distant moving obstacles by monocular vision

NASA Astrophysics Data System (ADS)

Jia, Bao-zhi; Zhu, Ming

2013-12-01

In this paper, we propose an approach for detection of distant moving obstacles like cars and bicycles by a monocular camera to cooperate with ultrasonic sensors in low-cost condition. We are aiming at detecting distant obstacles that move toward our autonomous navigation car in order to give alarm and keep away from them. Method of frame differencing is applied to find obstacles after compensation of camera's ego-motion. Meanwhile, each obstacle is separated from others in an independent area and given a confidence level to indicate whether it is coming closer. The results on an open dataset and our own autonomous navigation car have proved that the method is effective for detection of distant moving obstacles in real-time.

A Dynamic Bioinspired Neural Network Based Real-Time Path Planning Method for Autonomous Underwater Vehicles

PubMed Central

2017-01-01

Real-time path planning for autonomous underwater vehicle (AUV) is a very difficult and challenging task. Bioinspired neural network (BINN) has been used to deal with this problem for its many distinct advantages: that is, no learning process is needed and realization is also easy. However, there are some shortcomings when BINN is applied to AUV path planning in a three-dimensional (3D) unknown environment, including complex computing problem when the environment is very large and repeated path problem when the size of obstacles is bigger than the detection range of sensors. To deal with these problems, an improved dynamic BINN is proposed in this paper. In this proposed method, the AUV is regarded as the core of the BINN and the size of the BINN is based on the detection range of sensors. Then the BINN will move with the AUV and the computing could be reduced. A virtual target is proposed in the path planning method to ensure that the AUV can move to the real target effectively and avoid big-size obstacles automatically. Furthermore, a target attractor concept is introduced to improve the computing efficiency of neural activities. Finally, some experiments are conducted under various 3D underwater environments. The experimental results show that the proposed BINN based method can deal with the real-time path planning problem for AUV efficiently. PMID:28255297

A Dynamic Bioinspired Neural Network Based Real-Time Path Planning Method for Autonomous Underwater Vehicles.

PubMed

Ni, Jianjun; Wu, Liuying; Shi, Pengfei; Yang, Simon X

2017-01-01

Real-time path planning for autonomous underwater vehicle (AUV) is a very difficult and challenging task. Bioinspired neural network (BINN) has been used to deal with this problem for its many distinct advantages: that is, no learning process is needed and realization is also easy. However, there are some shortcomings when BINN is applied to AUV path planning in a three-dimensional (3D) unknown environment, including complex computing problem when the environment is very large and repeated path problem when the size of obstacles is bigger than the detection range of sensors. To deal with these problems, an improved dynamic BINN is proposed in this paper. In this proposed method, the AUV is regarded as the core of the BINN and the size of the BINN is based on the detection range of sensors. Then the BINN will move with the AUV and the computing could be reduced. A virtual target is proposed in the path planning method to ensure that the AUV can move to the real target effectively and avoid big-size obstacles automatically. Furthermore, a target attractor concept is introduced to improve the computing efficiency of neural activities. Finally, some experiments are conducted under various 3D underwater environments. The experimental results show that the proposed BINN based method can deal with the real-time path planning problem for AUV efficiently.

Advanced Augmented White Cane with obstacle height and distance feedback.

PubMed

Pyun, Rosali; Kim, Yeongmi; Wespe, Pascal; Gassert, Roger; Schneller, Stefan

2013-06-01

The white cane is a widely used mobility aid that helps visually impaired people navigate the surroundings. While it reliably and intuitively extends the detection range of ground-level obstacles and drop-offs to about 1.2 m, it lacks the ability to detect trunk and head-level obstacles. Electronic Travel Aids (ETAs) have been proposed to overcome these limitations, but have found minimal adoption due to limitations such as low information content and low reliability thereof. Although existing ETAs extend the sensing range beyond that of the conventional white cane, most of them do not detect head-level obstacles and drop-offs, nor can they identify the vertical extent of obstacles. Furthermore, some ETAs work independent of the white cane, and thus reliable detection of surface textures and drop-offs is not provided. This paper introduces a novel ETA, the Advanced Augmented White Cane, which detects obstacles at four vertical levels and provides multi-sensory feedback. We evaluated the device in five blindfolded subjects through reaction time measurements following the detection of an obstacle, as well as through the reliability of dropoff detection. The results showed that our aid could help the user successfully detect an obstacle and identify its height, with an average reaction time of 410 msec. Drop-offs were reliably detected with an intraclass correlation > 0.95. This work is a first step towards a low-cost ETA to complement the functionality of the conventional white cane.

On autonomous terrain model acquistion by a mobile robot

NASA Technical Reports Server (NTRS)

Rao, N. S. V.; Iyengar, S. S.; Weisbin, C. R.

1987-01-01

The following problem is considered: A point robot is placed in a terrain populated by an unknown number of polyhedral obstacles of varied sizes and locations in two/three dimensions. The robot is equipped with a sensor capable of detecting all the obstacle vertices and edges that are visible from the present location of the robot. The robot is required to autonomously navigate and build the complete terrain model using the sensor information. It is established that the necessary number of scanning operations needed for complete terrain model acquisition by any algorithm that is based on scan from vertices strategy is given by the summation of i = 1 (sup n) N(O sub i)-n and summation of i = 1 (sup n) N(O sub i)-2n in two- and three-dimensional terrains respectively, where O = (O sub 1, O sub 2,....O sub n) set of the obstacles in the terrain, and N(O sub i) is the number of vertices of the obstacle O sub i.

The quantum limit for gravitational-wave detectors and methods of circumventing it

NASA Technical Reports Server (NTRS)

Thorne, K. S.; Caves, C. M.; Sandberg, V. D.; Zimmermann, M.; Drever, R. W. P.

1979-01-01

The Heisenberg uncertainty principle prevents the monitoring of the complex amplitude of a mechanical oscillator more accurately than a certain limit value. This 'quantum limit' is a serious obstacle to the achievement of a 10 to the -21st gravitational-wave detection sensitivity. This paper examines the principles of the back-action evasion technique and finds that this technique may be able to overcome the problem of the quantum limit. Back-action evasion does not solve, however, other problems of detection, such as weak coupling, large amplifier noise, and large Nyquist noise.

Analysis and design of a capsule landing system and surface vehicle control system for Mars exploration

NASA Technical Reports Server (NTRS)

Gisser, D. G.; Frederick, D. K.; Lashmet, P. K.; Sandor, G. N.; Shen, C. N.; Yerazunis, S. Y.

1975-01-01

Problems related to an unmanned exploration of the planet Mars by means of an autonomous roving planetary vehicle are investigated. These problems include: design, construction and evaluation of the vehicle itself and its control and operating systems. More specifically, vehicle configuration, dynamics, control, propulsion, hazard detection systems, terrain sensing and modelling, obstacle detection concepts, path selection, decision-making systems, and chemical analyses of samples are studied. Emphasis is placed on development of a vehicle capable of gathering specimens and data for an Augmented Viking Mission or to provide the basis for a Sample Return Mission.

State-of-the-art technologies for intrusion and obstacle detection for railroad operations

DOT National Transportation Integrated Search

2007-07-01

This report provides an update on the state-of-the-art technologies with intrusion and obstacle detection capabilities for rail rights of way (ROW) and crossings. A workshop entitled Intruder and Obstacle Detection Systems (IODS) for Railroads Requir...

Obstacle avoidance handling and mixed integer predictive control for space robots

NASA Astrophysics Data System (ADS)

Zong, Lijun; Luo, Jianjun; Wang, Mingming; Yuan, Jianping

2018-04-01

This paper presents a novel obstacle avoidance constraint and a mixed integer predictive control (MIPC) method for space robots avoiding obstacles and satisfying physical limits during performing tasks. Firstly, a novel kind of obstacle avoidance constraint of space robots, which needs the assumption that the manipulator links and the obstacles can be represented by convex bodies, is proposed by limiting the relative velocity between two closest points which are on the manipulator and the obstacle, respectively. Furthermore, the logical variables are introduced into the obstacle avoidance constraint, which have realized the constraint form is automatically changed to satisfy different obstacle avoidance requirements in different distance intervals between the space robot and the obstacle. Afterwards, the obstacle avoidance constraint and other system physical limits, such as joint angle ranges, the amplitude boundaries of joint velocities and joint torques, are described as inequality constraints of a quadratic programming (QP) problem by using the model predictive control (MPC) method. To guarantee the feasibility of the obtained multi-constraint QP problem, the constraints are treated as soft constraints and assigned levels of priority based on the propositional logic theory, which can realize that the constraints with lower priorities are always firstly violated to recover the feasibility of the QP problem. Since the logical variables have been introduced, the optimization problem including obstacle avoidance and system physical limits as prioritized inequality constraints is termed as MIPC method of space robots, and its computational complexity as well as possible strategies for reducing calculation amount are analyzed. Simulations of the space robot unfolding its manipulator and tracking the end-effector's desired trajectories with the existence of obstacles and physical limits are presented to demonstrate the effectiveness of the proposed obstacle avoidance strategy and MIPC control method of space robots.

The application of Markov decision process in restaurant delivery robot

NASA Astrophysics Data System (ADS)

Wang, Yong; Hu, Zhen; Wang, Ying

2017-05-01

As the restaurant delivery robot is often in a dynamic and complex environment, including the chairs inadvertently moved to the channel and customers coming and going. The traditional path planning algorithm is not very ideal. To solve this problem, this paper proposes the Markov dynamic state immediate reward (MDR) path planning algorithm according to the traditional Markov decision process. First of all, it uses MDR to plan a global path, then navigates along this path. When the sensor detects there is no obstructions in front state, increase its immediate state reward value; when the sensor detects there is an obstacle in front, plan a global path that can avoid obstacle with the current position as the new starting point and reduce its state immediate reward value. This continues until the target is reached. When the robot learns for a period of time, it can avoid those places where obstacles are often present when planning the path. By analyzing the simulation experiment, the algorithm has achieved good results in the global path planning under the dynamic environment.

Online optimal obstacle avoidance for rotary-wing autonomous unmanned aerial vehicles

NASA Astrophysics Data System (ADS)

Kang, Keeryun

This thesis presents an integrated framework for online obstacle avoidance of rotary-wing unmanned aerial vehicles (UAVs), which can provide UAVs an obstacle field navigation capability in a partially or completely unknown obstacle-rich environment. The framework is composed of a LIDAR interface, a local obstacle grid generation, a receding horizon (RH) trajectory optimizer, a global shortest path search algorithm, and a climb rate limit detection logic. The key feature of the framework is the use of an optimization-based trajectory generation in which the obstacle avoidance problem is formulated as a nonlinear trajectory optimization problem with state and input constraints over the finite range of the sensor. This local trajectory optimization is combined with a global path search algorithm which provides a useful initial guess to the nonlinear optimization solver. Optimization is the natural process of finding the best trajectory that is dynamically feasible, safe within the vehicle's flight envelope, and collision-free at the same time. The optimal trajectory is continuously updated in real time by the numerical optimization solver, Nonlinear Trajectory Generation (NTG), which is a direct solver based on the spline approximation of trajectory for dynamically flat systems. In fact, the overall approach of this thesis to finding the optimal trajectory is similar to the model predictive control (MPC) or the receding horizon control (RHC), except that this thesis followed a two-layer design; thus, the optimal solution works as a guidance command to be followed by the controller of the vehicle. The framework is implemented in a real-time simulation environment, the Georgia Tech UAV Simulation Tool (GUST), and integrated in the onboard software of the rotary-wing UAV test-bed at Georgia Tech. Initially, the 2D vertical avoidance capability of real obstacles was tested in flight. The flight test evaluations were extended to the benchmark tests for 3D avoidance capability over the virtual obstacles, and finally it was demonstrated on real obstacles located at the McKenna MOUT site in Fort Benning, Georgia. Simulations and flight test evaluations demonstrate the feasibility of the developed framework for UAV applications involving low-altitude flight in an urban area.

Detecting Negative Obstacles by Use of Radar

NASA Technical Reports Server (NTRS)

Mittskus, Anthony; Lux, James

2006-01-01

Robotic land vehicles would be equipped with small radar systems to detect negative obstacles, according to a proposal. The term "negative obstacles" denotes holes, ditches, and any other terrain features characterized by abrupt steep downslopes that could be hazardous for vehicles. Video cameras and other optically based obstacle-avoidance sensors now installed on some robotic vehicles cannot detect obstacles under adverse lighting conditions. Even under favorable lighting conditions, they cannot detect negative obstacles. A radar system according to the proposal would be of the frequency-modulation/ continuous-wave (FM/CW) type. It would be installed on a vehicle, facing forward, possibly with a downward slant of the main lobe(s) of the radar beam(s) (see figure). It would utilize one or more wavelength(s) of the order of centimeters. Because such wavelengths are comparable to the characteristic dimensions of terrain features associated with negative hazards, a significant amount of diffraction would occur at such features. In effect, the diffraction would afford a limited ability to see corners and to see around corners. Hence, the system might utilize diffraction to detect corners associated with negative obstacles. At the time of reporting the information for this article, preliminary analyses of diffraction at simple negative obstacles had been performed, but an explicit description of how the system would utilize diffraction was not available.

Stereo-vision-based terrain mapping for off-road autonomous navigation

NASA Astrophysics Data System (ADS)

Rankin, Arturo L.; Huertas, Andres; Matthies, Larry H.

2009-05-01

Successful off-road autonomous navigation by an unmanned ground vehicle (UGV) requires reliable perception and representation of natural terrain. While perception algorithms are used to detect driving hazards, terrain mapping algorithms are used to represent the detected hazards in a world model a UGV can use to plan safe paths. There are two primary ways to detect driving hazards with perception sensors mounted to a UGV: binary obstacle detection and traversability cost analysis. Binary obstacle detectors label terrain as either traversable or non-traversable, whereas, traversability cost analysis assigns a cost to driving over a discrete patch of terrain. In uncluttered environments where the non-obstacle terrain is equally traversable, binary obstacle detection is sufficient. However, in cluttered environments, some form of traversability cost analysis is necessary. The Jet Propulsion Laboratory (JPL) has explored both approaches using stereo vision systems. A set of binary detectors has been implemented that detect positive obstacles, negative obstacles, tree trunks, tree lines, excessive slope, low overhangs, and water bodies. A compact terrain map is built from each frame of stereo images. The mapping algorithm labels cells that contain obstacles as nogo regions, and encodes terrain elevation, terrain classification, terrain roughness, traversability cost, and a confidence value. The single frame maps are merged into a world map where temporal filtering is applied. In previous papers, we have described our perception algorithms that perform binary obstacle detection. In this paper, we summarize the terrain mapping capabilities that JPL has implemented during several UGV programs over the last decade and discuss some challenges to building terrain maps with stereo range data.

Stereo Vision Based Terrain Mapping for Off-Road Autonomous Navigation

NASA Technical Reports Server (NTRS)

Rankin, Arturo L.; Huertas, Andres; Matthies, Larry H.

2009-01-01

Successful off-road autonomous navigation by an unmanned ground vehicle (UGV) requires reliable perception and representation of natural terrain. While perception algorithms are used to detect driving hazards, terrain mapping algorithms are used to represent the detected hazards in a world model a UGV can use to plan safe paths. There are two primary ways to detect driving hazards with perception sensors mounted to a UGV: binary obstacle detection and traversability cost analysis. Binary obstacle detectors label terrain as either traversable or non-traversable, whereas, traversability cost analysis assigns a cost to driving over a discrete patch of terrain. In uncluttered environments where the non-obstacle terrain is equally traversable, binary obstacle detection is sufficient. However, in cluttered environments, some form of traversability cost analysis is necessary. The Jet Propulsion Laboratory (JPL) has explored both approaches using stereo vision systems. A set of binary detectors has been implemented that detect positive obstacles, negative obstacles, tree trunks, tree lines, excessive slope, low overhangs, and water bodies. A compact terrain map is built from each frame of stereo images. The mapping algorithm labels cells that contain obstacles as no-go regions, and encodes terrain elevation, terrain classification, terrain roughness, traversability cost, and a confidence value. The single frame maps are merged into a world map where temporal filtering is applied. In previous papers, we have described our perception algorithms that perform binary obstacle detection. In this paper, we summarize the terrain mapping capabilities that JPL has implemented during several UGV programs over the last decade and discuss some challenges to building terrain maps with stereo range data.

A game theory-based obstacle avoidance routing protocol for wireless sensor networks.

PubMed

Guan, Xin; Wu, Huayang; Bi, Shujun

2011-01-01

The obstacle avoidance problem in geographic forwarding is an important issue for location-based routing in wireless sensor networks. The presence of an obstacle leads to several geographic routing problems such as excessive energy consumption and data congestion. Obstacles are hard to avoid in realistic environments. To bypass obstacles, most routing protocols tend to forward packets along the obstacle boundaries. This leads to a situation where the nodes at the boundaries exhaust their energy rapidly and the obstacle area is diffused. In this paper, we introduce a novel routing algorithm to solve the obstacle problem in wireless sensor networks based on a game-theory model. Our algorithm forms a concave region that cannot forward packets to achieve the aim of improving the transmission success rate and decreasing packet transmission delays. We consider the residual energy, out-degree and forwarding angle to determine the forwarding probability and payoff function of forwarding candidates. This achieves the aim of load balance and reduces network energy consumption. Simulation results show that based on the average delivery delay, energy consumption and packet delivery ratio performances our protocol is superior to other traditional schemes.

Multiple-camera/motion stereoscopy for range estimation in helicopter flight

NASA Technical Reports Server (NTRS)

Smith, Phillip N.; Sridhar, Banavar; Suorsa, Raymond E.

1993-01-01

Aiding the pilot to improve safety and reduce pilot workload by detecting obstacles and planning obstacle-free flight paths during low-altitude helicopter flight is desirable. Computer vision techniques provide an attractive method of obstacle detection and range estimation for objects within a large field of view ahead of the helicopter. Previous research has had considerable success by using an image sequence from a single moving camera to solving this problem. The major limitations of single camera approaches are that no range information can be obtained near the instantaneous direction of motion or in the absence of motion. These limitations can be overcome through the use of multiple cameras. This paper presents a hybrid motion/stereo algorithm which allows range refinement through recursive range estimation while avoiding loss of range information in the direction of travel. A feature-based approach is used to track objects between image frames. An extended Kalman filter combines knowledge of the camera motion and measurements of a feature's image location to recursively estimate the feature's range and to predict its location in future images. Performance of the algorithm will be illustrated using an image sequence, motion information, and independent range measurements from a low-altitude helicopter flight experiment.

Assisting the visually impaired: obstacle detection and warning system by acoustic feedback.

PubMed

Rodríguez, Alberto; Yebes, J Javier; Alcantarilla, Pablo F; Bergasa, Luis M; Almazán, Javier; Cela, Andrés

2012-12-17

The aim of this article is focused on the design of an obstacle detection system for assisting visually impaired people. A dense disparity map is computed from the images of a stereo camera carried by the user. By using the dense disparity map, potential obstacles can be detected in 3D in indoor and outdoor scenarios. A ground plane estimation algorithm based on RANSAC plus filtering techniques allows the robust detection of the ground in every frame. A polar grid representation is proposed to account for the potential obstacles in the scene. The design is completed with acoustic feedback to assist visually impaired users while approaching obstacles. Beep sounds with different frequencies and repetitions inform the user about the presence of obstacles. Audio bone conducting technology is employed to play these sounds without interrupting the visually impaired user from hearing other important sounds from its local environment. A user study participated by four visually impaired volunteers supports the proposed system.

A Neural Network Approach for Building An Obstacle Detection Model by Fusion of Proximity Sensors Data

PubMed Central

Peralta, Emmanuel; Vargas, Héctor; Hermosilla, Gabriel

2018-01-01

Proximity sensors are broadly used in mobile robots for obstacle detection. The traditional calibration process of this kind of sensor could be a time-consuming task because it is usually done by identification in a manual and repetitive way. The resulting obstacles detection models are usually nonlinear functions that can be different for each proximity sensor attached to the robot. In addition, the model is highly dependent on the type of sensor (e.g., ultrasonic or infrared), on changes in light intensity, and on the properties of the obstacle such as shape, colour, and surface texture, among others. That is why in some situations it could be useful to gather all the measurements provided by different kinds of sensor in order to build a unique model that estimates the distances to the obstacles around the robot. This paper presents a novel approach to get an obstacles detection model based on the fusion of sensors data and automatic calibration by using artificial neural networks. PMID:29495338

Assisting the Visually Impaired: Obstacle Detection and Warning System by Acoustic Feedback

PubMed Central

Rodríguez, Alberto; Yebes, J. Javier; Alcantarilla, Pablo F.; Bergasa, Luis M.; Almazán, Javier; Cela, Andrés

2012-01-01

The aim of this article is focused on the design of an obstacle detection system for assisting visually impaired people. A dense disparity map is computed from the images of a stereo camera carried by the user. By using the dense disparity map, potential obstacles can be detected in 3D in indoor and outdoor scenarios. A ground plane estimation algorithm based on RANSAC plus filtering techniques allows the robust detection of the ground in every frame. A polar grid representation is proposed to account for the potential obstacles in the scene. The design is completed with acoustic feedback to assist visually impaired users while approaching obstacles. Beep sounds with different frequencies and repetitions inform the user about the presence of obstacles. Audio bone conducting technology is employed to play these sounds without interrupting the visually impaired user from hearing other important sounds from its local environment. A user study participated by four visually impaired volunteers supports the proposed system. PMID:23247413

Obstacle Avoidance On Roadways Using Range Data

NASA Astrophysics Data System (ADS)

Dunlay, R. Terry; Morgenthaler, David G.

1987-02-01

This report describes range data based obstacle avoidance techniques developed for use on an autonomous road-following robot vehicle. The purpose of these techniques is to detect and locate obstacles present in a road environment for navigation of a robot vehicle equipped with an active laser-based range sensor. Techniques are presented for obstacle detection, obstacle location, and coordinate transformations needed in the construction of Scene Models (symbolic structures representing the 3-D obstacle boundaries used by the vehicle's Navigator for path planning). These techniques have been successfully tested on an outdoor robotic vehicle, the Autonomous Land Vehicle (ALV), at speeds up to 3.5 km/hour.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stroemqvist, Martin H., E-mail: stromqv@kth.se

We study the problem of optimally controlling the solution of the obstacle problem in a domain perforated by small periodically distributed holes. The solution is controlled by the choice of a perforated obstacle which is to be chosen in such a fashion that the solution is close to a given profile and the obstacle is not too irregular. We prove existence, uniqueness and stability of an optimal obstacle and derive necessary and sufficient conditions for optimality. When the number of holes increase indefinitely we determine the limit of the sequence of optimal obstacles and solutions. This limit depends strongly onmore » the rate at which the size of the holes shrink.« less

Laser development for optimal helicopter obstacle warning system LADAR performance

NASA Astrophysics Data System (ADS)

Yaniv, A.; Krupkin, V.; Abitbol, A.; Stern, J.; Lurie, E.; German, A.; Solomonovich, S.; Lubashitz, B.; Harel, Y.; Engart, S.; Shimoni, Y.; Hezy, S.; Biltz, S.; Kaminetsky, E.; Goldberg, A.; Chocron, J.; Zuntz, N.; Zajdman, A.

2005-04-01

Low lying obstacles present immediate danger to both military and civilian helicopters performing low-altitude flight missions. A LADAR obstacle detection system is the natural solution for enhancing helicopter safety and improving the pilot situation awareness. Elop is currently developing an advanced Surveillance and Warning Obstacle Ranging and Display (SWORD) system for the Israeli Air Force. Several key factors and new concepts have contributed to system optimization. These include an adaptive FOV, data memorization, autonomous obstacle detection and warning algorithms and the use of an agile laser transmitter. In the present work we describe the laser design and performance and discuss some of the experimental results. Our eye-safe laser is characterized by its pulse energy, repetition rate and pulse length agility. By dynamically controlling these parameters, we are able to locally optimize the system"s obstacle detection range and scan density in accordance with the helicopter instantaneous maneuver.

Assessment of a simple obstacle detection device for the visually impaired.

PubMed

Lee, Cheng-Lung; Chen, Chih-Yung; Sung, Peng-Cheng; Lu, Shih-Yi

2014-07-01

A simple obstacle detection device, based upon an automobile parking sensor, was assessed as a mobility aid for the visually impaired. A questionnaire survey for mobility needs was performed at the start of this study. After the detector was developed, five blindfolded sighted and 15 visually impaired participants were invited to conduct travel experiments under three test conditions: (1) using a white cane only, (2) using the obstacle detector only and (3) using both devices. A post-experiment interview regarding the usefulness of the obstacle detector for the visually impaired participants was performed. The results showed that the obstacle detector could augment mobility performance with the white cane. The obstacle detection device should be used in conjunction with the white cane to achieve the best mobility speed and body protection. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Obstacle Detection Algorithms for Aircraft Navigation: Performance Characterization of Obstacle Detection Algorithms for Aircraft Navigation

NASA Technical Reports Server (NTRS)

Kasturi, Rangachar; Camps, Octavia; Coraor, Lee

2000-01-01

The research reported here is a part of NASA's Synthetic Vision System (SVS) project for the development of a High Speed Civil Transport Aircraft (HSCT). One of the components of the SVS is a module for detection of potential obstacles in the aircraft's flight path by analyzing the images captured by an on-board camera in real-time. Design of such a module includes the selection and characterization of robust, reliable, and fast techniques and their implementation for execution in real-time. This report describes the results of our research in realizing such a design. It is organized into three parts. Part I. Data modeling and camera characterization; Part II. Algorithms for detecting airborne obstacles; and Part III. Real time implementation of obstacle detection algorithms on the Datacube MaxPCI architecture. A list of publications resulting from this grant as well as a list of relevant publications resulting from prior NASA grants on this topic are presented.

Recovering an elastic obstacle containing embedded objects by the acoustic far-field measurements

NASA Astrophysics Data System (ADS)

Qu, Fenglong; Yang, Jiaqing; Zhang, Bo

2018-01-01

Consider the inverse scattering problem of time-harmonic acoustic waves by a 3D bounded elastic obstacle which may contain embedded impenetrable obstacles inside. We propose a novel and simple technique to show that the elastic obstacle can be uniquely recovered by the acoustic far-field pattern at a fixed frequency, disregarding its contents. Our method is based on constructing a well-posed modified interior transmission problem on a small domain and makes use of an a priori estimate for both the acoustic and elastic wave fields in the usual H 1-norm. In the case when there is no obstacle embedded inside the elastic body, our method gives a much simpler proof for the uniqueness result obtained previously in the literature (Natroshvili et al 2000 Rend. Mat. Serie VII 20 57-92 Monk and Selgas 2009 Inverse Problems Imaging 3 173-98).

A soft robot capable of 2D mobility and self-sensing for obstacle detection and avoidance

NASA Astrophysics Data System (ADS)

Qin, Lei; Tang, Yucheng; Gupta, Ujjaval; Zhu, Jian

2018-04-01

Soft robots have shown great potential for surveillance applications due to their interesting attributes including inherent flexibility, extreme adaptability, and excellent ability to move in confined spaces. High mobility combined with the sensing systems that can detect obstacles plays a significant role in performing surveillance tasks. Extensive studies have been conducted on movement mechanisms of traditional hard-bodied robots to increase their mobility. However, there are limited efforts in the literature to explore the mobility of soft robots. In addition, little attempt has been made to study the obstacle-detection capability of a soft mobile robot. In this paper, we develop a soft mobile robot capable of high mobility and self-sensing for obstacle detection and avoidance. This robot, consisting of a dielectric elastomer actuator as the robot body and four electroadhesion actuators as the robot feet, can generate 2D mobility, i.e. translations and turning in a 2D plane, by programming the actuation sequence of the robot body and feet. Furthermore, we develop a self-sensing method which models the robot body as a deformable capacitor. By measuring the real-time capacitance of the robot body, the robot can detect an obstacle when the peak capacitance drops suddenly. This sensing method utilizes the robot body itself instead of external sensors to achieve detection of obstacles, which greatly reduces the weight and complexity of the robot system. The 2D mobility and self-sensing capability ensure the success of obstacle detection and avoidance, which paves the way for the development of lightweight and intelligent soft mobile robots.

Learning Impasses in Problem Solving

NASA Technical Reports Server (NTRS)

Hodgson, J. P. E.

1992-01-01

Problem Solving systems customarily use backtracking to deal with obstacles that they encounter in the course of trying to solve a problem. This paper outlines an approach in which the possible obstacles are investigated prior to the search for a solution. This provides a solution strategy that avoids backtracking.

DeepAnomaly: Combining Background Subtraction and Deep Learning for Detecting Obstacles and Anomalies in an Agricultural Field.

PubMed

Christiansen, Peter; Nielsen, Lars N; Steen, Kim A; Jørgensen, Rasmus N; Karstoft, Henrik

2016-11-11

Convolutional neural network (CNN)-based systems are increasingly used in autonomous vehicles for detecting obstacles. CNN-based object detection and per-pixel classification (semantic segmentation) algorithms are trained for detecting and classifying a predefined set of object types. These algorithms have difficulties in detecting distant and heavily occluded objects and are, by definition, not capable of detecting unknown object types or unusual scenarios. The visual characteristics of an agriculture field is homogeneous, and obstacles, like people, animals and other obstacles, occur rarely and are of distinct appearance compared to the field. This paper introduces DeepAnomaly, an algorithm combining deep learning and anomaly detection to exploit the homogenous characteristics of a field to perform anomaly detection. We demonstrate DeepAnomaly as a fast state-of-the-art detector for obstacles that are distant, heavily occluded and unknown. DeepAnomaly is compared to state-of-the-art obstacle detectors including "Faster R-CNN: Towards Real-Time Object Detection with Region Proposal Networks" (RCNN). In a human detector test case, we demonstrate that DeepAnomaly detects humans at longer ranges (45-90 m) than RCNN. RCNN has a similar performance at a short range (0-30 m). However, DeepAnomaly has much fewer model parameters and (182 ms/25 ms =) a 7.28-times faster processing time per image. Unlike most CNN-based methods, the high accuracy, the low computation time and the low memory footprint make it suitable for a real-time system running on a embedded GPU (Graphics Processing Unit).

DeepAnomaly: Combining Background Subtraction and Deep Learning for Detecting Obstacles and Anomalies in an Agricultural Field

PubMed Central

Christiansen, Peter; Nielsen, Lars N.; Steen, Kim A.; Jørgensen, Rasmus N.; Karstoft, Henrik

2016-01-01

Convolutional neural network (CNN)-based systems are increasingly used in autonomous vehicles for detecting obstacles. CNN-based object detection and per-pixel classification (semantic segmentation) algorithms are trained for detecting and classifying a predefined set of object types. These algorithms have difficulties in detecting distant and heavily occluded objects and are, by definition, not capable of detecting unknown object types or unusual scenarios. The visual characteristics of an agriculture field is homogeneous, and obstacles, like people, animals and other obstacles, occur rarely and are of distinct appearance compared to the field. This paper introduces DeepAnomaly, an algorithm combining deep learning and anomaly detection to exploit the homogenous characteristics of a field to perform anomaly detection. We demonstrate DeepAnomaly as a fast state-of-the-art detector for obstacles that are distant, heavily occluded and unknown. DeepAnomaly is compared to state-of-the-art obstacle detectors including “Faster R-CNN: Towards Real-Time Object Detection with Region Proposal Networks” (RCNN). In a human detector test case, we demonstrate that DeepAnomaly detects humans at longer ranges (45–90 m) than RCNN. RCNN has a similar performance at a short range (0–30 m). However, DeepAnomaly has much fewer model parameters and (182 ms/25 ms =) a 7.28-times faster processing time per image. Unlike most CNN-based methods, the high accuracy, the low computation time and the low memory footprint make it suitable for a real-time system running on a embedded GPU (Graphics Processing Unit). PMID:27845717

The Detection Method of Fire Abnormal Based on Directional Drilling in Complex Conditions of Mine

NASA Astrophysics Data System (ADS)

Huijun, Duan; Shijun, Hao; Jie, Feng

2018-06-01

In the light of more and more urgent hidden fire abnormal detection problem in complex conditions of mine, a method which is used directional drilling technology is put forward. The method can avoid the obstacles in mine, and complete the fire abnormal detection. This paper based on analyzing the trajectory control of directional drilling, measurement while drilling and the characteristic of open branch process, the project of the directional drilling is formulated combination with a complex condition mine, and the detection of fire abnormal is implemented. This method can provide technical support for fire prevention, which also can provide a new way for fire anomaly detection in the similar mine.

A Monocular Vision Sensor-Based Obstacle Detection Algorithm for Autonomous Robots.

PubMed

Lee, Tae-Jae; Yi, Dong-Hoon; Cho, Dong-Il Dan

2016-03-01

This paper presents a monocular vision sensor-based obstacle detection algorithm for autonomous robots. Each individual image pixel at the bottom region of interest is labeled as belonging either to an obstacle or the floor. While conventional methods depend on point tracking for geometric cues for obstacle detection, the proposed algorithm uses the inverse perspective mapping (IPM) method. This method is much more advantageous when the camera is not high off the floor, which makes point tracking near the floor difficult. Markov random field-based obstacle segmentation is then performed using the IPM results and a floor appearance model. Next, the shortest distance between the robot and the obstacle is calculated. The algorithm is tested by applying it to 70 datasets, 20 of which include nonobstacle images where considerable changes in floor appearance occur. The obstacle segmentation accuracies and the distance estimation error are quantitatively analyzed. For obstacle datasets, the segmentation precision and the average distance estimation error of the proposed method are 81.4% and 1.6 cm, respectively, whereas those for a conventional method are 57.5% and 9.9 cm, respectively. For nonobstacle datasets, the proposed method gives 0.0% false positive rates, while the conventional method gives 17.6%.

UAVs Task and Motion Planning in the Presence of Obstacles and Prioritized Targets

PubMed Central

Gottlieb, Yoav; Shima, Tal

2015-01-01

The intertwined task assignment and motion planning problem of assigning a team of fixed-winged unmanned aerial vehicles to a set of prioritized targets in an environment with obstacles is addressed. It is assumed that the targets’ locations and initial priorities are determined using a network of unattended ground sensors used to detect potential threats at restricted zones. The targets are characterized by a time-varying level of importance, and timing constraints must be fulfilled before a vehicle is allowed to visit a specific target. It is assumed that the vehicles are carrying body-fixed sensors and, thus, are required to approach a designated target while flying straight and level. The fixed-winged aerial vehicles are modeled as Dubins vehicles, i.e., having a constant speed and a minimum turning radius constraint. The investigated integrated problem of task assignment and motion planning is posed in the form of a decision tree, and two search algorithms are proposed: an exhaustive algorithm that improves over run time and provides the minimum cost solution, encoded in the tree, and a greedy algorithm that provides a quick feasible solution. To satisfy the target’s visitation timing constraint, a path elongation motion planning algorithm amidst obstacles is provided. Using simulations, the performance of the algorithms is compared, evaluated and exemplified. PMID:26610522

Passive range estimation for rotorcraft low-altitude flight

NASA Technical Reports Server (NTRS)

Sridhar, B.; Suorsa, R.; Hussien, B.

1991-01-01

The automation of rotorcraft low-altitude flight presents challenging problems in control, computer vision and image understanding. A critical element in this problem is the ability to detect and locate obstacles, using on-board sensors, and modify the nominal trajectory. This requirement is also necessary for the safe landing of an autonomous lander on Mars. This paper examines some of the issues in the location of objects using a sequence of images from a passive sensor, and describes a Kalman filter approach to estimate the range to obstacles. The Kalman filter is also used to track features in the images leading to a significant reduction of search effort in the feature extraction step of the algorithm. The method can compute range for both straight line and curvilinear motion of the sensor. A laboratory experiment was designed to acquire a sequence of images along with sensor motion parameters under conditions similar to helicopter flight. Range estimation results using this imagery are presented.

Radar-based collision avoidance for unmanned surface vehicles

NASA Astrophysics Data System (ADS)

Zhuang, Jia-yuan; Zhang, Lei; Zhao, Shi-qi; Cao, Jian; Wang, Bo; Sun, Han-bing

2016-12-01

Unmanned surface vehicles (USVs) have become a focus of research because of their extensive applications. To ensure safety and reliability and to perform complex tasks autonomously, USVs are required to possess accurate perception of the environment and effective collision avoidance capabilities. To achieve these, investigation into realtime marine radar target detection and autonomous collision avoidance technologies is required, aiming at solving the problems of noise jamming, uneven brightness, target loss, and blind areas in marine radar images. These technologies should also satisfy the requirements of real-time and reliability related to high navigation speeds of USVs. Therefore, this study developed an embedded collision avoidance system based on the marine radar, investigated a highly real-time target detection method which contains adaptive smoothing algorithm and robust segmentation algorithm, developed a stable and reliable dynamic local environment model to ensure the safety of USV navigation, and constructed a collision avoidance algorithm based on velocity obstacle (V-obstacle) which adjusts the USV's heading and speed in real-time. Sea trials results in multi-obstacle avoidance firstly demonstrate the effectiveness and efficiency of the proposed avoidance system, and then verify its great adaptability and relative stability when a USV sailing in a real and complex marine environment. The obtained results will improve the intelligent level of USV and guarantee the safety of USV independent sailing.

A Compact Magnetic Field-Based Obstacle Detection and Avoidance System for Miniature Spherical Robots.

PubMed

Wu, Fang; Vibhute, Akash; Soh, Gim Song; Wood, Kristin L; Foong, Shaohui

2017-05-28

Due to their efficient locomotion and natural tolerance to hazardous environments, spherical robots have wide applications in security surveillance, exploration of unknown territory and emergency response. Numerous studies have been conducted on the driving mechanism, motion planning and trajectory tracking methods of spherical robots, yet very limited studies have been conducted regarding the obstacle avoidance capability of spherical robots. Most of the existing spherical robots rely on the "hit and run" technique, which has been argued to be a reasonable strategy because spherical robots have an inherent ability to recover from collisions. Without protruding components, they will not become stuck and can simply roll back after running into bstacles. However, for small scale spherical robots that contain sensitive surveillance sensors and cannot afford to utilize heavy protective shells, the absence of obstacle avoidance solutions would leave the robot at the mercy of potentially dangerous obstacles. In this paper, a compact magnetic field-based obstacle detection and avoidance system has been developed for miniature spherical robots. It utilizes a passive magnetic field so that the system is both compact and power efficient. The proposed system can detect not only the presence, but also the approaching direction of a ferromagnetic obstacle, therefore, an intelligent avoidance behavior can be generated by adapting the trajectory tracking method with the detection information. Design optimization is conducted to enhance the obstacle detection performance and detailed avoidance strategies are devised. Experimental results are also presented for validation purposes.

Fast and reliable obstacle detection and segmentation for cross-country navigation

NASA Technical Reports Server (NTRS)

Talukder, A.; Manduchi, R.; Rankin, A.; Matthies, L.

2002-01-01

Obstacle detection is one of the main components of the control system of autonomous vehicles. In the case of indoor/urban navigation, obstacles are typically defined as surface points that are higher than the ground plane. This characterization, however, cannot be used in cross-country and unstructured environments, where the notion of ground plane is often not meaningful.

Exact Solution of the Two-Dimensional Problem on an Impact Ideal-Liquid Jet

NASA Astrophysics Data System (ADS)

Belik, V. D.

2018-05-01

The two-dimensional problem on the collision of a potential ideal-liquid jet, outflowing from a reservoir through a nozzle, with an infinite plane obstacle was considered for the case where the distance between the nozzle exit section and the obstacle is finite. An exact solution of this problem has been found using methods of the complex-variable function theory. Simple analytical expressions for the complex velocity of the liquid, its flow rate, and the force of action of the jet on the obstacle have been obtained. The velocity distributions of the liquid at the nozzle exit section, in the region of spreading of the jet, and at the obstacle have been constructed for different distances between the nozzle exit section and the obstacle. Analytical expressions for the thickness of the boundary layer and the Nusselt number at the point of stagnation of the jet have been obtained. A number of distributions of the local friction coefficient and the Nusselt number of the indicated jet are presented.

A Monocular Vision Sensor-Based Obstacle Detection Algorithm for Autonomous Robots

PubMed Central

Lee, Tae-Jae; Yi, Dong-Hoon; Cho, Dong-Il “Dan”

2016-01-01

This paper presents a monocular vision sensor-based obstacle detection algorithm for autonomous robots. Each individual image pixel at the bottom region of interest is labeled as belonging either to an obstacle or the floor. While conventional methods depend on point tracking for geometric cues for obstacle detection, the proposed algorithm uses the inverse perspective mapping (IPM) method. This method is much more advantageous when the camera is not high off the floor, which makes point tracking near the floor difficult. Markov random field-based obstacle segmentation is then performed using the IPM results and a floor appearance model. Next, the shortest distance between the robot and the obstacle is calculated. The algorithm is tested by applying it to 70 datasets, 20 of which include nonobstacle images where considerable changes in floor appearance occur. The obstacle segmentation accuracies and the distance estimation error are quantitatively analyzed. For obstacle datasets, the segmentation precision and the average distance estimation error of the proposed method are 81.4% and 1.6 cm, respectively, whereas those for a conventional method are 57.5% and 9.9 cm, respectively. For nonobstacle datasets, the proposed method gives 0.0% false positive rates, while the conventional method gives 17.6%. PMID:26938540

Obstacles Related to Structuring for Mathematization Encountered by Students When Solving Physics Problems

ERIC Educational Resources Information Center

Niss, Martin

2017-01-01

This paper studies the cognitive obstacles related to one aspect of mathematization in physics problem-solving, namely, what might be called "structuring for mathematization," where the problem situation is structured in such a way that a translation to a mathematical universe can be done. We report the results of an analysis of four…

FieldSAFE: Dataset for Obstacle Detection in Agriculture.

PubMed

Kragh, Mikkel Fly; Christiansen, Peter; Laursen, Morten Stigaard; Larsen, Morten; Steen, Kim Arild; Green, Ole; Karstoft, Henrik; Jørgensen, Rasmus Nyholm

2017-11-09

In this paper, we present a multi-modal dataset for obstacle detection in agriculture. The dataset comprises approximately 2 h of raw sensor data from a tractor-mounted sensor system in a grass mowing scenario in Denmark, October 2016. Sensing modalities include stereo camera, thermal camera, web camera, 360 ∘ camera, LiDAR and radar, while precise localization is available from fused IMU and GNSS. Both static and moving obstacles are present, including humans, mannequin dolls, rocks, barrels, buildings, vehicles and vegetation. All obstacles have ground truth object labels and geographic coordinates.

FieldSAFE: Dataset for Obstacle Detection in Agriculture

PubMed Central

Christiansen, Peter; Larsen, Morten; Steen, Kim Arild; Green, Ole; Karstoft, Henrik

2017-01-01

In this paper, we present a multi-modal dataset for obstacle detection in agriculture. The dataset comprises approximately 2 h of raw sensor data from a tractor-mounted sensor system in a grass mowing scenario in Denmark, October 2016. Sensing modalities include stereo camera, thermal camera, web camera, 360∘ camera, LiDAR and radar, while precise localization is available from fused IMU and GNSS. Both static and moving obstacles are present, including humans, mannequin dolls, rocks, barrels, buildings, vehicles and vegetation. All obstacles have ground truth object labels and geographic coordinates. PMID:29120383

Integrating Millimeter Wave Radar with a Monocular Vision Sensor for On-Road Obstacle Detection Applications

PubMed Central

Wang, Tao; Zheng, Nanning; Xin, Jingmin; Ma, Zheng

2011-01-01

This paper presents a systematic scheme for fusing millimeter wave (MMW) radar and a monocular vision sensor for on-road obstacle detection. As a whole, a three-level fusion strategy based on visual attention mechanism and driver’s visual consciousness is provided for MMW radar and monocular vision fusion so as to obtain better comprehensive performance. Then an experimental method for radar-vision point alignment for easy operation with no reflection intensity of radar and special tool requirements is put forward. Furthermore, a region searching approach for potential target detection is derived in order to decrease the image processing time. An adaptive thresholding algorithm based on a new understanding of shadows in the image is adopted for obstacle detection, and edge detection is used to assist in determining the boundary of obstacles. The proposed fusion approach is verified through real experimental examples of on-road vehicle/pedestrian detection. In the end, the experimental results show that the proposed method is simple and feasible. PMID:22164117

Integrating millimeter wave radar with a monocular vision sensor for on-road obstacle detection applications.

PubMed

Wang, Tao; Zheng, Nanning; Xin, Jingmin; Ma, Zheng

2011-01-01

This paper presents a systematic scheme for fusing millimeter wave (MMW) radar and a monocular vision sensor for on-road obstacle detection. As a whole, a three-level fusion strategy based on visual attention mechanism and driver's visual consciousness is provided for MMW radar and monocular vision fusion so as to obtain better comprehensive performance. Then an experimental method for radar-vision point alignment for easy operation with no reflection intensity of radar and special tool requirements is put forward. Furthermore, a region searching approach for potential target detection is derived in order to decrease the image processing time. An adaptive thresholding algorithm based on a new understanding of shadows in the image is adopted for obstacle detection, and edge detection is used to assist in determining the boundary of obstacles. The proposed fusion approach is verified through real experimental examples of on-road vehicle/pedestrian detection. In the end, the experimental results show that the proposed method is simple and feasible.

Early Obstacle Detection and Avoidance for All to All Traffic Pattern in Wireless Sensor Networks

NASA Astrophysics Data System (ADS)

Huc, Florian; Jarry, Aubin; Leone, Pierre; Moraru, Luminita; Nikoletseas, Sotiris; Rolim, Jose

This paper deals with early obstacles recognition in wireless sensor networks under various traffic patterns. In the presence of obstacles, the efficiency of routing algorithms is increased by voluntarily avoiding some regions in the vicinity of obstacles, areas which we call dead-ends. In this paper, we first propose a fast convergent routing algorithm with proactive dead-end detection together with a formal definition and description of dead-ends. Secondly, we present a generalization of this algorithm which improves performances in all to many and all to all traffic patterns. In a third part we prove that this algorithm produces paths that are optimal up to a constant factor of 2π + 1. In a fourth part we consider the reactive version of the algorithm which is an extension of a previously known early obstacle detection algorithm. Finally we give experimental results to illustrate the efficiency of our algorithms in different scenarios.

An Algorithm for Pedestrian Detection in Multispectral Image Sequences

NASA Astrophysics Data System (ADS)

Kniaz, V. V.; Fedorenko, V. V.

2017-05-01

The growing interest for self-driving cars provides a demand for scene understanding and obstacle detection algorithms. One of the most challenging problems in this field is the problem of pedestrian detection. Main difficulties arise from a diverse appearances of pedestrians. Poor visibility conditions such as fog and low light conditions also significantly decrease the quality of pedestrian detection. This paper presents a new optical flow based algorithm BipedDetet that provides robust pedestrian detection on a single-borad computer. The algorithm is based on the idea of simplified Kalman filtering suitable for realization on modern single-board computers. To detect a pedestrian a synthetic optical flow of the scene without pedestrians is generated using slanted-plane model. The estimate of a real optical flow is generated using a multispectral image sequence. The difference of the synthetic optical flow and the real optical flow provides the optical flow induced by pedestrians. The final detection of pedestrians is done by the segmentation of the difference of optical flows. To evaluate the BipedDetect algorithm a multispectral dataset was collected using a mobile robot.

The Value of Removing Daily Obstacles via Everyday Problem-Solving Theory: Developing an Applied Novel Procedure to Increase Self-Efficacy for Exercise

PubMed Central

Artistico, Daniele; Pinto, Angela Marinilli; Douek, Jill; Black, Justin; Pezzuti, Lina

2012-01-01

The objective of the study was to develop a novel procedure to increase self-efficacy for exercise. Gains in one’s ability to resolve day-to-day obstacles for entering an exercise routine were expected to cause an increase in self-efficacy for exercise. Fifty-five sedentary participants (did not exercise regularly for at least 4 months prior to the study) who expressed an intention to exercise in the near future were selected for the study. Participants were randomly assigned to one of three conditions: (1) an Experimental Group in which they received a problem-solving training session to learn new strategies for solving day-to-day obstacles that interfere with exercise, (2) a Control Group with Problem-Solving Training which received a problem-solving training session focused on a typical day-to-day problem unrelated to exercise, or (3) a Control Group which did not receive any problem-solving training. Assessment of obstacles to exercise and perceived self-efficacy for exercise were conducted at baseline; perceived self-efficacy for exercise was reassessed post-intervention (1 week later). No differences in perceived challenges posed by obstacles to exercise or self-efficacy for exercise were observed across groups at baseline. The Experimental Group reported greater improvement in self-efficacy for exercise compared to the Control Group with Training and the Control Group. Results of this study suggest that a novel procedure that focuses on removing obstacles to intended planned fitness activities is effective in increasing self-efficacy to engage in exercise among sedentary adults. Implications of these findings for use in applied settings and treatment studies are discussed. PMID:23372560

The Value of Removing Daily Obstacles via Everyday Problem-Solving Theory: Developing an Applied Novel Procedure to Increase Self-Efficacy for Exercise.

PubMed

Artistico, Daniele; Pinto, Angela Marinilli; Douek, Jill; Black, Justin; Pezzuti, Lina

2013-01-01

The objective of the study was to develop a novel procedure to increase self-efficacy for exercise. Gains in one's ability to resolve day-to-day obstacles for entering an exercise routine were expected to cause an increase in self-efficacy for exercise. Fifty-five sedentary participants (did not exercise regularly for at least 4 months prior to the study) who expressed an intention to exercise in the near future were selected for the study. Participants were randomly assigned to one of three conditions: (1) an Experimental Group in which they received a problem-solving training session to learn new strategies for solving day-to-day obstacles that interfere with exercise, (2) a Control Group with Problem-Solving Training which received a problem-solving training session focused on a typical day-to-day problem unrelated to exercise, or (3) a Control Group which did not receive any problem-solving training. Assessment of obstacles to exercise and perceived self-efficacy for exercise were conducted at baseline; perceived self-efficacy for exercise was reassessed post-intervention (1 week later). No differences in perceived challenges posed by obstacles to exercise or self-efficacy for exercise were observed across groups at baseline. The Experimental Group reported greater improvement in self-efficacy for exercise compared to the Control Group with Training and the Control Group. Results of this study suggest that a novel procedure that focuses on removing obstacles to intended planned fitness activities is effective in increasing self-efficacy to engage in exercise among sedentary adults. Implications of these findings for use in applied settings and treatment studies are discussed.

INS integrated motion analysis for autonomous vehicle navigation

NASA Technical Reports Server (NTRS)

Roberts, Barry; Bazakos, Mike

1991-01-01

The use of inertial navigation system (INS) measurements to enhance the quality and robustness of motion analysis techniques used for obstacle detection is discussed with particular reference to autonomous vehicle navigation. The approach to obstacle detection used here employs motion analysis of imagery generated by a passive sensor. Motion analysis of imagery obtained during vehicle travel is used to generate range measurements to points within the field of view of the sensor, which can then be used to provide obstacle detection. Results obtained with an INS integrated motion analysis approach are reviewed.

Smart walking stick for blind people: an application of 3D printer

NASA Astrophysics Data System (ADS)

Ikbal, Md. Allama; Rahman, Faidur; Ali, Md. Ripon; Kabir, M. Hasnat; Furukawa, Hidemitsu

2017-04-01

A prototype of the smart walking stick has been designed and characterized for the people who are visually impaired. In this study, it was considered that the proposed system will alert visuallyimpaired people over the obstacles which are in front of blind people as well as the obstacles of the street such as a manhole, when the blind people are walking in the street. The proposed system was designed in two stages, i.e. hardware and software which makes the system as a complete prototype. Three ultrasonic sonar sensors were used to detect in front obstacle and street surface obstacle such as manhole. Basically the sensor transmits an electromagnetic wave which travels toward the obstacle and back to the sensor receiver. The distance between the sensor and the obstacle is calculated from the received signal. The calculated distance value is compared with the pre-defined value and determines whether the obstacle is present or not. The 3D CAD software was used to design the sensor holder. An Up-Mini 3D printer was used to print the sensor holders which were mounted on the walking stick. Therefore, the sensors were fixed in the right position. Another sensor was used for the detecting the water on the walking street. The performance for detecting the obstacles and water indicate the merit of smart walking stick.

Using Thermal Radiation in Detection of Negative Obstacles

NASA Technical Reports Server (NTRS)

Rankin, Arturo L.; Matthies, Larry H.

2009-01-01

A method of automated detection of negative obstacles (potholes, ditches, and the like) ahead of ground vehicles at night involves processing of imagery from thermal-infrared cameras aimed at the terrain ahead of the vehicles. The method is being developed as part of an overall obstacle-avoidance scheme for autonomous and semi-autonomous offroad robotic vehicles. The method could also be applied to help human drivers of cars and trucks avoid negative obstacles -- a development that may entail only modest additional cost inasmuch as some commercially available passenger cars are already equipped with infrared cameras as aids for nighttime operation.

Dual stage potential field method for robotic path planning

NASA Astrophysics Data System (ADS)

Singh, Pradyumna Kumar; Parida, Pramod Kumar

2018-04-01

Path planning for autonomous mobile robots are the root for all autonomous mobile systems. Various methods are used for optimization of path to be followed by the autonomous mobile robots. Artificial potential field based path planning method is one of the most used methods for the researchers. Various algorithms have been proposed using the potential field approach. But in most of the common problems are encounters while heading towards the goal or target. i.e. local minima problem, zero potential regions problem, complex shaped obstacles problem, target near obstacle problem. In this paper we provide a new algorithm in which two types of potential functions are used one after another. The former one is to use to get the probable points and later one for getting the optimum path. In this algorithm we consider only the static obstacle and goal.

C1,1 regularity for degenerate elliptic obstacle problems

NASA Astrophysics Data System (ADS)

Daskalopoulos, Panagiota; Feehan, Paul M. N.

2016-03-01

The Heston stochastic volatility process is a degenerate diffusion process where the degeneracy in the diffusion coefficient is proportional to the square root of the distance to the boundary of the half-plane. The generator of this process with killing, called the elliptic Heston operator, is a second-order, degenerate-elliptic partial differential operator, where the degeneracy in the operator symbol is proportional to the distance to the boundary of the half-plane. In mathematical finance, solutions to the obstacle problem for the elliptic Heston operator correspond to value functions for perpetual American-style options on the underlying asset. With the aid of weighted Sobolev spaces and weighted Hölder spaces, we establish the optimal C 1 , 1 regularity (up to the boundary of the half-plane) for solutions to obstacle problems for the elliptic Heston operator when the obstacle functions are sufficiently smooth.

Data acquisition and path selection decision making for an autonomous roving vehicle

NASA Technical Reports Server (NTRS)

Frederick, D. K.; Shen, C. N.; Yerazunis, S. W.

1976-01-01

Problems related to the guidance of an autonomous rover for unmanned planetary exploration were investigated. Topics included in these studies were: simulation on an interactive graphics computer system of the Rapid Estimation Technique for detection of discrete obstacles; incorporation of a simultaneous Bayesian estimate of states and inputs in the Rapid Estimation Scheme; development of methods for estimating actual laser rangefinder errors and their application to date provided by Jet Propulsion Laboratory; and modification of a path selection system simulation computer code for evaluation of a hazard detection system based on laser rangefinder data.

Stereo vision tracking of multiple objects in complex indoor environments.

PubMed

Marrón-Romera, Marta; García, Juan C; Sotelo, Miguel A; Pizarro, Daniel; Mazo, Manuel; Cañas, José M; Losada, Cristina; Marcos, Alvaro

2010-01-01

This paper presents a novel system capable of solving the problem of tracking multiple targets in a crowded, complex and dynamic indoor environment, like those typical of mobile robot applications. The proposed solution is based on a stereo vision set in the acquisition step and a probabilistic algorithm in the obstacles position estimation process. The system obtains 3D position and speed information related to each object in the robot's environment; then it achieves a classification between building elements (ceiling, walls, columns and so on) and the rest of items in robot surroundings. All objects in robot surroundings, both dynamic and static, are considered to be obstacles but the structure of the environment itself. A combination of a Bayesian algorithm and a deterministic clustering process is used in order to obtain a multimodal representation of speed and position of detected obstacles. Performance of the final system has been tested against state of the art proposals; test results validate the authors' proposal. The designed algorithms and procedures provide a solution to those applications where similar multimodal data structures are found.

Enabling UAV Navigation with Sensor and Environmental Uncertainty in Cluttered and GPS-Denied Environments

PubMed Central

Vanegas, Fernando; Gonzalez, Felipe

2016-01-01

Unmanned Aerial Vehicles (UAV) can navigate with low risk in obstacle-free environments using ground control stations that plan a series of GPS waypoints as a path to follow. This GPS waypoint navigation does however become dangerous in environments where the GPS signal is faulty or is only present in some places and when the airspace is filled with obstacles. UAV navigation then becomes challenging because the UAV uses other sensors, which in turn generate uncertainty about its localisation and motion systems, especially if the UAV is a low cost platform. Additional uncertainty affects the mission when the UAV goal location is only partially known and can only be discovered by exploring and detecting a target. This navigation problem is established in this research as a Partially-Observable Markov Decision Process (POMDP), so as to produce a policy that maps a set of motion commands to belief states and observations. The policy is calculated and updated on-line while flying with a newly-developed system for UAV Uncertainty-Based Navigation (UBNAV), to navigate in cluttered and GPS-denied environments using observations and executing motion commands instead of waypoints. Experimental results in both simulation and real flight tests show that the UAV finds a path on-line to a region where it can explore and detect a target without colliding with obstacles. UBNAV provides a new method and an enabling technology for scientists to implement and test UAV navigation missions with uncertainty where targets must be detected using on-line POMDP in real flight scenarios. PMID:27171096

Enabling UAV Navigation with Sensor and Environmental Uncertainty in Cluttered and GPS-Denied Environments.

PubMed

Vanegas, Fernando; Gonzalez, Felipe

2016-05-10

Unmanned Aerial Vehicles (UAV) can navigate with low risk in obstacle-free environments using ground control stations that plan a series of GPS waypoints as a path to follow. This GPS waypoint navigation does however become dangerous in environments where the GPS signal is faulty or is only present in some places and when the airspace is filled with obstacles. UAV navigation then becomes challenging because the UAV uses other sensors, which in turn generate uncertainty about its localisation and motion systems, especially if the UAV is a low cost platform. Additional uncertainty affects the mission when the UAV goal location is only partially known and can only be discovered by exploring and detecting a target. This navigation problem is established in this research as a Partially-Observable Markov Decision Process (POMDP), so as to produce a policy that maps a set of motion commands to belief states and observations. The policy is calculated and updated on-line while flying with a newly-developed system for UAV Uncertainty-Based Navigation (UBNAV), to navigate in cluttered and GPS-denied environments using observations and executing motion commands instead of waypoints. Experimental results in both simulation and real flight tests show that the UAV finds a path on-line to a region where it can explore and detect a target without colliding with obstacles. UBNAV provides a new method and an enabling technology for scientists to implement and test UAV navigation missions with uncertainty where targets must be detected using on-line POMDP in real flight scenarios.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Jaesun, E-mail: jaesun@pusan.ac.kr, E-mail: jpp@pusan.ac.kr; Park, Junpil, E-mail: jaesun@pusan.ac.kr, E-mail: jpp@pusan.ac.kr; Cho, Younho, E-mail: mechcyh@pusan.ac.kr

The nuclear power plant inspection is very important for the safety issue. However due to some radiation and geometric problems, the detection of CRDM(Control Rod Drive Mechanism) can be very difficult by using conventional Ultrasonic Testing method. Also the shrink fit boundary condition can also be an obstacle for the inspection in this paper, instead of conventional Ultrasonic Testing, guided wave was used for the detection of some complicated structures. The CRDM nozzle was installed in reactor head with perfect shrink fit condition by using stainless steel. The wave amplitude distribution on the circumferential direction was calculated with various boundarymore » conditions and the experimental result shows a possibility of the defect detection on J-groove weld.« less

Getting to Darwin: Obstacles to Accepting Evolution by Natural Selection

ERIC Educational Resources Information Center

Thagard, Paul; Findlay, Scott

2010-01-01

Darwin's theory of evolution by natural selection is central to modern biology, but is resisted by many people. This paper discusses the major psychological obstacles to accepting Darwin's theory. Cognitive obstacles to adopting evolution by natural selection include conceptual difficulties, methodological issues, and coherence problems that…

Obstacles in Qualitative Research: Possible Solutions

ERIC Educational Resources Information Center

Poggenpoel, M.; Myburgh, C. P. H.

2005-01-01

In conducting research, the identified problem in the field will determine the research strategies chosen to address the problem. When a qualitative research strategy is deemed as the most appropriate strategy to get answers to research questions, the researcher should be aware of obstacles that can be encountered in the research process. If the…

Organizational factors in fire prevention: roles, obstacles, and recommendations

Treesearch

John R. Christiansen; William S. Folkman; Keith W. Warner; Michael L. Woolcott

1976-01-01

Problems being encountered in implementing fire prevention programs were explored by studying the organization for fire prevention at the Fish Lake, Uinta, and Wasatch National Forests in Utah. The study focused on role congruency in fire prevention activities and on the social and organizational obstacles to effective programs. The problems identified included lack of...

Low-Altitude Operation of Unmanned Rotorcraft

NASA Astrophysics Data System (ADS)

Scherer, Sebastian

Currently deployed unmanned rotorcraft rely on preplanned missions or teleoperation and do not actively incorporate information about obstacles, landing sites, wind, position uncertainty, and other aerial vehicles during online motion planning. Prior work has successfully addressed some tasks such as obstacle avoidance at slow speeds, or landing at known to be good locations. However, to enable autonomous missions in cluttered environments, the vehicle has to react quickly to previously unknown obstacles, respond to changing environmental conditions, and find unknown landing sites. We consider the problem of enabling autonomous operation at low-altitude with contributions to four problems. First we address the problem of fast obstacle avoidance for a small aerial vehicle and present results from over a 1000 rims at speeds up to 10 m/s. Fast response is achieved through a reactive algorithm whose response is learned based on observing a pilot. Second, we show an algorithm to update the obstacle cost expansion for path planning quickly and demonstrate it on a micro aerial vehicle, and an autonomous helicopter avoiding obstacles. Next, we examine the mission of finding a place to land near a ground goal. Good landing sites need to be detected and found and the final touch down goal is unknown. To detect the landing sites we convey a model based algorithm for landing sites that incorporates many helicopter relevant constraints such as landing sites, approach, abort, and ground paths in 3D range data. The landing site evaluation algorithm uses a patch-based coarse evaluation for slope and roughness, and a fine evaluation that fits a 3D model of the helicopter and landing gear to calculate a goodness measure. The data are evaluated in real-time to enable the helicopter to decide on a place to land. We show results from urban, vegetated, and desert environments, and demonstrate the first autonomous helicopter that selects its own landing sites. We present a generalized planning framework that enables reaching a goal point, searching for unknown landing sites, and approaching a landing zone. In the framework, sub-objective functions, constraints, and a state machine define the mission and behavior of an UAV. As the vehicle gathers information by moving through the environment, the objective functions account for this new information. The operator in this framework can directly specify his intent as an objective function that defines the mission rather than giving a sequence of pre-specified goal points. This allows the robot to react to new information received and adjust its path accordingly. The objective is used in a combined coarse planning and trajectory optimization algorithm to determine the best patch the robot should take. We show simulated results for several different missions and in particular focus on active landing zone search. We presented several effective approaches for perception and action for low-altitude flight and demonstrated their effectiveness in field experiments on three autonomous aerial vehicles: a 1m quadrocopter, a 36m helicopter, and a hill-size helicopter. These techniques permit rotorcraft to operate where they have their greatest advantage: In unstructured, unknown environments at low-altitude.

Overcoming an obstacle in expanding a UMLS semantic type extent.

PubMed

Chen, Yan; Gu, Huanying; Perl, Yehoshua; Geller, James

2012-02-01

This paper strives to overcome a major problem encountered by a previous expansion methodology for discovering concepts highly likely to be missing a specific semantic type assignment in the UMLS. This methodology is the basis for an algorithm that presents the discovered concepts to a human auditor for review and possible correction. We analyzed the problem of the previous expansion methodology and discovered that it was due to an obstacle constituted by one or more concepts assigned the UMLS Semantic Network semantic type Classification. A new methodology was designed that bypasses such an obstacle without a combinatorial explosion in the number of concepts presented to the human auditor for review. The new expansion methodology with obstacle avoidance was tested with the semantic type Experimental Model of Disease and found over 500 concepts missed by the previous methodology that are in need of this semantic type assignment. Furthermore, other semantic types suffering from the same major problem were discovered, indicating that the methodology is of more general applicability. The algorithmic discovery of concepts that are likely missing a semantic type assignment is possible even in the face of obstacles, without an explosion in the number of processed concepts. Copyright © 2011 Elsevier Inc. All rights reserved.

Overcoming an Obstacle in Expanding a UMLS Semantic Type Extent

PubMed Central

Chen, Yan; Gu, Huanying; Perl, Yehoshua; Geller, James

2011-01-01

This paper strives to overcome a major problem encountered by a previous expansion methodology for discovering concepts highly likely to be missing a specific semantic type assignment in the UMLS. This methodology is the basis for an algorithm that presents the discovered concepts to a human auditor for review and possible correction. We analyzed the problem of the previous expansion methodology and discovered that it was due to an obstacle constituted by one or more concepts assigned the UMLS Semantic Network semantic type Classification. A new methodology was designed that bypasses such an obstacle without a combinatorial explosion in the number of concepts presented to the human auditor for review. The new expansion methodology with obstacle avoidance was tested with the semantic type Experimental Model of Disease and found over 500 concepts missed by the previous methodology that are in need of this semantic type assignment. Furthermore, other semantic types suffering from the same major problem were discovered, indicating that the methodology is of more general applicability. The algorithmic discovery of concepts that are likely missing a semantic type assignment is possible even in the face of obstacles, without an explosion in the number of processed concepts. PMID:21925287

Velodyne HDL-64E lidar for unmanned surface vehicle obstacle detection

NASA Astrophysics Data System (ADS)

Halterman, Ryan; Bruch, Michael

2010-04-01

The Velodyne HDL-64E is a 64 laser 3D (360×26.8 degree) scanning LIDAR. It was designed to fill perception needs of DARPA Urban Challenge vehicles. As such, it was principally intended for ground use. This paper presents the performance of the HDL-64E as it relates to the marine environment for unmanned surface vehicle (USV) obstacle detection and avoidance. We describe the sensor's capacity for discerning relevant objects at sea- both through subjective observations of the raw data and through a rudimentary automated obstacle detection algorithm. We also discuss some of the complications that have arisen with the sensor.

Automatic Quadcopter Control Avoiding Obstacle Using Camera with Integrated Ultrasonic Sensor

NASA Astrophysics Data System (ADS)

Anis, Hanafi; Haris Indra Fadhillah, Ahmad; Darma, Surya; Soekirno, Santoso

2018-04-01

Automatic navigation on the drone is being developed these days, a wide variety of types of drones and its automatic functions. Drones used in this study was an aircraft with four propellers or quadcopter. In this experiment, image processing used to recognize the position of an object and ultrasonic sensor used to detect obstacle distance. The method used to trace an obsctacle in image processing was the Lucas-Kanade-Tomasi Tracker, which had been widely used due to its high accuracy. Ultrasonic sensor used to complement the image processing success rate to be fully detected object. The obstacle avoidance system was to observe at the program decisions from some obstacle conditions read by the camera and ultrasonic sensors. Visual feedback control based PID controllers are used as a control of drones movement. The conclusion of the obstacle avoidance system was to observe at the program decisions from some obstacle conditions read by the camera and ultrasonic sensors.

Flight data acquisition methodology for validation of passive ranging algorithms for obstacle avoidance

NASA Technical Reports Server (NTRS)

Smith, Phillip N.

1990-01-01

The automation of low-altitude rotorcraft flight depends on the ability to detect, locate, and navigate around obstacles lying in the rotorcraft's intended flightpath. Computer vision techniques provide a passive method of obstacle detection and range estimation, for obstacle avoidance. Several algorithms based on computer vision methods have been developed for this purpose using laboratory data; however, further development and validation of candidate algorithms require data collected from rotorcraft flight. A data base containing low-altitude imagery augmented with the rotorcraft and sensor parameters required for passive range estimation is not readily available. Here, the emphasis is on the methodology used to develop such a data base from flight-test data consisting of imagery, rotorcraft and sensor parameters, and ground-truth range measurements. As part of the data preparation, a technique for obtaining the sensor calibration parameters is described. The data base will enable the further development of algorithms for computer vision-based obstacle detection and passive range estimation, as well as provide a benchmark for verification of range estimates against ground-truth measurements.

Vision-based obstacle recognition system for automated lawn mower robot development

NASA Astrophysics Data System (ADS)

Mohd Zin, Zalhan; Ibrahim, Ratnawati

2011-06-01

Digital image processing techniques (DIP) have been widely used in various types of application recently. Classification and recognition of a specific object using vision system require some challenging tasks in the field of image processing and artificial intelligence. The ability and efficiency of vision system to capture and process the images is very important for any intelligent system such as autonomous robot. This paper gives attention to the development of a vision system that could contribute to the development of an automated vision based lawn mower robot. The works involve on the implementation of DIP techniques to detect and recognize three different types of obstacles that usually exist on a football field. The focus was given on the study on different types and sizes of obstacles, the development of vision based obstacle recognition system and the evaluation of the system's performance. Image processing techniques such as image filtering, segmentation, enhancement and edge detection have been applied in the system. The results have shown that the developed system is able to detect and recognize various types of obstacles on a football field with recognition rate of more 80%.

Detection of obstacles on runway using Ego-Motion compensation and tracking of significant features

NASA Technical Reports Server (NTRS)

Kasturi, Rangachar (Principal Investigator); Camps, Octavia (Principal Investigator); Gandhi, Tarak; Devadiga, Sadashiva

1996-01-01

This report describes a method for obstacle detection on a runway for autonomous navigation and landing of an aircraft. Detection is done in the presence of extraneous features such as tiremarks. Suitable features are extracted from the image and warping using approximately known camera and plane parameters is performed in order to compensate ego-motion as far as possible. Residual disparity after warping is estimated using an optical flow algorithm. Features are tracked from frame to frame so as to obtain more reliable estimates of their motion. Corrections are made to motion parameters with the residual disparities using a robust method, and features having large residual disparities are signaled as obstacles. Sensitivity analysis of the procedure is also studied. Nelson's optical flow constraint is proposed to separate moving obstacles from stationary ones. A Bayesian framework is used at every stage so that the confidence in the estimates can be determined.

Graph pyramids as models of human problem solving

NASA Astrophysics Data System (ADS)

Pizlo, Zygmunt; Li, Zheng

2004-05-01

Prior theories have assumed that human problem solving involves estimating distances among states and performing search through the problem space. The role of mental representation in those theories was minimal. Results of our recent experiments suggest that humans are able to solve some difficult problems quickly and accurately. Specifically, in solving these problems humans do not seem to rely on distances or on search. It is quite clear that producing good solutions without performing search requires a very effective mental representation. In this paper we concentrate on studying the nature of this representation. Our theory takes the form of a graph pyramid. To verify the psychological plausibility of this theory we tested subjects in a Euclidean Traveling Salesman Problem in the presence of obstacles. The role of the number and size of obstacles was tested for problems with 6-50 cities. We analyzed the effect of experimental conditions on solution time per city and on solution error. The main result is that time per city is systematically affected only by the size of obstacles, but not by their number, or by the number of cities.

Principle, system, and applications of tip-enhanced Raman spectroscopy

NASA Astrophysics Data System (ADS)

Zhang, MingQian; Wang, Rui; Wu, XiaoBin; Wang, Jia

2012-08-01

Raman spectroscopy is a powerful technique in chemical information characterization. However, this spectral method is subject to two obstacles in nano-material detection. One is diffraction limited spatial resolution, and the other is its inherent small Raman cross section and weak signaling. To resolve these problems, a new approach has been developed, denoted as tip-enhanced Raman spectroscopy (TERS). TERS is capable of high-resolution and high-sensitivity detection and demonstrated to be a promising spectroscopic and micro-topographic method to characterize nano-materials and nanostructures. In this paper, the principle and experimental system of TERS are discussed. The latest application of TERS in molecule detection, biological specimen identification, nanao-material characterization, and semi-conductor material determination with some specific experimental examples are presented.

A study on pseudo interface wave technique for CRDM weld defects in nuclear power plants

NASA Astrophysics Data System (ADS)

Lee, Jaesun; Park, Junpil; Cho, Younho; Huh, Hyung; Park, Keun-Bae; Kim, Dong-Ok

2015-03-01

The nuclear power plant inspection is very important for the safety issue. However due to some radiation and geometric problems, the detection of CRDM(Control Rod Drive Mechanism) can be very difficult by using conventional Ultrasonic Testing method. Also the shrink fit boundary condition can also be an obstacle for the inspection in this paper, instead of conventional Ultrasonic Testing, guided wave was used for the detection of some complicated structures. The CRDM nozzle was installed in reactor head with perfect shrink fit condition by using stainless steel. The wave amplitude distribution on the circumferential direction was calculated with various boundary conditions and the experimental result shows a possibility of the defect detection on J-groove weld.

An intelligent rollator for mobility impaired persons, especially stroke patients.

PubMed

Hellström, Thomas; Lindahl, Olof; Bäcklund, Tomas; Karlsson, Marcus; Hohnloser, Peter; Bråndal, Anna; Hu, Xiaolei; Wester, Per

2016-07-01

An intelligent rollator (IRO) was developed that aims at obstacle detection and guidance to avoid collisions and accidental falls. The IRO is a retrofit four-wheeled rollator with an embedded computer, two solenoid brakes, rotation sensors on the wheels and IR-distance sensors. The value reported by each distance sensor was compared in the computer to a nominal distance. Deviations indicated a present obstacle and caused activation of one of the brakes in order to influence the direction of motion to avoid the obstacle. The IRO was tested by seven healthy subjects with simulated restricted and blurred sight and five stroke subjects on a standardised indoor track with obstacles. All tested subjects walked faster with intelligence deactivated. Three out of five stroke patients experienced more detected obstacles with intelligence activated. This suggests enhanced safety during walking with IRO. Further studies are required to explore the full value of the IRO.

Experience of the ARGO autonomous vehicle

NASA Astrophysics Data System (ADS)

Bertozzi, Massimo; Broggi, Alberto; Conte, Gianni; Fascioli, Alessandra

1998-07-01

This paper presents and discusses the first results obtained by the GOLD (Generic Obstacle and Lane Detection) system as an automatic driver of ARGO. ARGO is a Lancia Thema passenger car equipped with a vision-based system that allows to extract road and environmental information from the acquired scene. By means of stereo vision, obstacles on the road are detected and localized, while the processing of a single monocular image allows to extract the road geometry in front of the vehicle. The generality of the underlying approach allows to detect generic obstacles (without constraints on shape, color, or symmetry) and to detect lane markings even in dark and in strong shadow conditions. The hardware system consists of a PC Pentium 200 Mhz with MMX technology and a frame-grabber board able to acquire 3 b/w images simultaneously; the result of the processing (position of obstacles and geometry of the road) is used to drive an actuator on the steering wheel, while debug information are presented to the user on an on-board monitor and a led-based control panel.

Critical transition in the constrained traveling salesman problem.

PubMed

Andrecut, M; Ali, M K

2001-04-01

We investigate the finite size scaling of the mean optimal tour length as a function of density of obstacles in a constrained variant of the traveling salesman problem (TSP). The computational experience pointed out a critical transition (at rho(c) approximately 85%) in the dependence between the excess of the mean optimal tour length over the Held-Karp lower bound and the density of obstacles.

Obstacle Classification and 3D Measurement in Unstructured Environments Based on ToF Cameras

PubMed Central

Yu, Hongshan; Zhu, Jiang; Wang, Yaonan; Jia, Wenyan; Sun, Mingui; Tang, Yandong

2014-01-01

Inspired by the human 3D visual perception system, we present an obstacle detection and classification method based on the use of Time-of-Flight (ToF) cameras for robotic navigation in unstructured environments. The ToF camera provides 3D sensing by capturing an image along with per-pixel 3D space information. Based on this valuable feature and human knowledge of navigation, the proposed method first removes irrelevant regions which do not affect robot's movement from the scene. In the second step, regions of interest are detected and clustered as possible obstacles using both 3D information and intensity image obtained by the ToF camera. Consequently, a multiple relevance vector machine (RVM) classifier is designed to classify obstacles into four possible classes based on the terrain traversability and geometrical features of the obstacles. Finally, experimental results in various unstructured environments are presented to verify the robustness and performance of the proposed approach. We have found that, compared with the existing obstacle recognition methods, the new approach is more accurate and efficient. PMID:24945679

Analysis and design of a capsule landing system and surface vehicle control system for Mars exploration

NASA Technical Reports Server (NTRS)

Frederick, D. K.; Lashmet, P. K.; Sandor, G. N.; Shen, C. N.; Smith, E. J.; Yerazunis, S. W.

1971-01-01

Investigation of problems related to control of a mobile planetary vehicle according to a systematic plan for the exploration of Mars has been undertaken. Problem areas receiving attention include: (1) overall systems analysis; (2) vehicle configuration and dynamics; (3) toroidal wheel design and evaluation; (4) on-board navigation systems; (5) satellite-vehicle navigation systems; (6) obstacle detection systems; (7) terrain sensing, interpretation and modeling; (8) computer simulation of terrain sensor-path selection systems; and (9) chromatographic systems design concept studies. The specific tasks which have been undertaken are defined and the progress which has been achieved during the period July 1, 1971 to December 31, 1971 is summarized.

Computer simulation and evaluation of edge detection algorithms and their application to automatic path selection

NASA Technical Reports Server (NTRS)

Longendorfer, B. A.

1976-01-01

The construction of an autonomous roving vehicle requires the development of complex data-acquisition and processing systems, which determine the path along which the vehicle travels. Thus, a vehicle must possess algorithms which can (1) reliably detect obstacles by processing sensor data, (2) maintain a constantly updated model of its surroundings, and (3) direct its immediate actions to further a long range plan. The first function consisted of obstacle recognition. Obstacles may be identified by the use of edge detection techniques. Therefore, the Kalman Filter was implemented as part of a large scale computer simulation of the Mars Rover. The second function consisted of modeling the environment. The obstacle must be reconstructed from its edges, and the vast amount of data must be organized in a readily retrievable form. Therefore, a Terrain Modeller was developed which assembled and maintained a rectangular grid map of the planet. The third function consisted of directing the vehicle's actions.

Adolescent health and social problems. A method for detection and early management. The Dartmouth Primary Care Cooperative Information Project (COOP).

PubMed

Wasson, J H; Kairys, S W; Nelson, E C; Kalishman, N; Baribeau, P; Wasson, E

1995-01-01

To develop and test a method for identification and early management of the health and social problems of adolescents, many of which go undetected and untreated. Picture-and-word charts for the measurement of health and social problems formed the core of a brief, self-teaching lesson. Other sections of the lesson were designed to help teenagers interpret, invent solutions for, and communicate concerns about these problems. We examined the impact of the lesson on teenagers' understanding of themselves, their feelings, and their actions. Two hundred ninety-one adolescents served as subjects for this research. Less than 5% of the respondents found the chart-based lesson difficult or bothersome in the way it probed personal topics. Ninety percent reported that the lesson would have some positive impact on their actions or feelings. Three to six weeks after completing the lesson, their opinion of its impact remained high, and 36% of the students reported that they had shown it to others outside the school. A chart-based lesson is well accepted by adolescents and can be used to overcome obstacles for the detection and early management of adolescents' health and social problems.

Integrated Collision Avoidance System for Air Vehicle

NASA Technical Reports Server (NTRS)

Lin, Ching-Fang (Inventor)

2013-01-01

Collision with ground/water/terrain and midair obstacles is one of the common causes of severe aircraft accidents. The various data from the coremicro AHRS/INS/GPS Integration Unit, terrain data base, and object detection sensors are processed to produce collision warning audio/visual messages and collision detection and avoidance of terrain and obstacles through generation of guidance commands in a closed-loop system. The vision sensors provide more information for the Integrated System, such as, terrain recognition and ranging of terrain and obstacles, which plays an important role to the improvement of the Integrated Collision Avoidance System.

Prevention 0f Unwanted Free-Declaration of Static Obstacles in Probability Occupancy Grids

NASA Astrophysics Data System (ADS)

Krause, Stefan; Scholz, M.; Hohmann, R.

2017-10-01

Obstacle detection and avoidance are major research fields in unmanned aviation. Map based obstacle detection approaches often use discrete world representations such as probabilistic grid maps to fuse incremental environment data from different views or sensors to build a comprehensive representation. The integration of continuous measurements into a discrete representation can result in rounding errors which, in turn, leads to differences between the artificial model and real environment. The cause of these deviations is a low spatial resolution of the world representation comparison to the used sensor data. Differences between artificial representations which are used for path planning or obstacle avoidance and the real world can lead to unexpected behavior up to collisions with unmapped obstacles. This paper presents three approaches to the treatment of errors that can occur during the integration of continuous laser measurement in the discrete probabilistic grid. Further, the quality of the error prevention and the processing performance are compared with real sensor data.

An Obstacle Problem for Conical Deformations of Thin Elastic Sheets

NASA Astrophysics Data System (ADS)

Figalli, Alessio; Mooney, Connor

2018-05-01

A developable cone ("d-cone") is the shape made by an elastic sheet when it is pressed at its center into a hollow cylinder by a distance {ɛ}. Starting from a nonlinear model depending on the thickness h > 0 of the sheet, we prove a {Γ} -convergence result as {h → 0} to a fourth-order obstacle problem for curves in {S^2}. We then describe the exact shape of minimizers of the limit problem when {ɛ} is small. In particular, we rigorously justify previous results in the physics literature.

Strategies for handling ethical problems in end of life care: obstacles and possibilities.

PubMed

Rejnö, Åsa; Berg, Linda

2015-11-01

In end of life care, ethical problems often come to the fore. Little research is performed on ways or strategies for handling those problems and even less on obstacles to and possibilities of using such strategies. A previous study illuminated stroke team members' experiences of ethical problems and how the teams managed the situation when caring for patients faced with sudden and unexpected death from stroke. These findings have been further explored in this study. The aim of the study was to illuminate obstacles and possibilities perceived by stroke team members in using strategies for handling ethical problems when caring for patients afflicted by sudden and unexpected death caused by stroke. A qualitative method with combined deductive and inductive content analysis was utilized. Data were collected through individual interviews with 15 stroke team members working in stroke units of two associated county hospitals in western Sweden. The study was approved by the Regional Ethics Review Board, Gothenburg, Sweden. Permission was also obtained from the director of each stroke unit. All the studied strategies for handling of ethical problems were found to have both obstacles and possibilities. Uncertainty is shown as a major obstacle and unanimity as a possibility in the use of the strategies. The findings also illuminate the value of the concept "the patient's best interests" as a starting point for the carers' ethical reasoning. The concept "the patient's best interests" used as a starting point for ethical reasoning among the carers is not explicitly defined yet, which might make this value difficult to use both as a universal concept and as an argument for decisions. Carers therefore need to strengthen their argumentation and reflect on and use ethically grounded arguments and defined ethical values like dignity in their clinical work and decisions. © The Author(s) 2014.

Tracked robot controllers for climbing obstacles autonomously

NASA Astrophysics Data System (ADS)

Vincent, Isabelle

2009-05-01

Research in mobile robot navigation has demonstrated some success in navigating flat indoor environments while avoiding obstacles. However, the challenge of analyzing complex environments to climb obstacles autonomously has had very little success due to the complexity of the task. Unmanned ground vehicles currently exhibit simple autonomous behaviours compared to the human ability to move in the world. This paper presents the control algorithms designed for a tracked mobile robot to autonomously climb obstacles by varying its tracks configuration. Two control algorithms are proposed to solve the autonomous locomotion problem for climbing obstacles. First, a reactive controller evaluates the appropriate geometric configuration based on terrain and vehicle geometric considerations. Then, a reinforcement learning algorithm finds alternative solutions when the reactive controller gets stuck while climbing an obstacle. The methodology combines reactivity to learning. The controllers have been demonstrated in box and stair climbing simulations. The experiments illustrate the effectiveness of the proposed approach for crossing obstacles.

A novel artificial immune algorithm for spatial clustering with obstacle constraint and its applications.

PubMed

Sun, Liping; Luo, Yonglong; Ding, Xintao; Zhang, Ji

2014-01-01

An important component of a spatial clustering algorithm is the distance measure between sample points in object space. In this paper, the traditional Euclidean distance measure is replaced with innovative obstacle distance measure for spatial clustering under obstacle constraints. Firstly, we present a path searching algorithm to approximate the obstacle distance between two points for dealing with obstacles and facilitators. Taking obstacle distance as similarity metric, we subsequently propose the artificial immune clustering with obstacle entity (AICOE) algorithm for clustering spatial point data in the presence of obstacles and facilitators. Finally, the paper presents a comparative analysis of AICOE algorithm and the classical clustering algorithms. Our clustering model based on artificial immune system is also applied to the case of public facility location problem in order to establish the practical applicability of our approach. By using the clone selection principle and updating the cluster centers based on the elite antibodies, the AICOE algorithm is able to achieve the global optimum and better clustering effect.

Numerical approach of collision avoidance and optimal control on robotic manipulators

NASA Technical Reports Server (NTRS)

Wang, Jyhshing Jack

1990-01-01

Collision-free optimal motion and trajectory planning for robotic manipulators are solved by a method of sequential gradient restoration algorithm. Numerical examples of a two degree-of-freedom (DOF) robotic manipulator are demonstrated to show the excellence of the optimization technique and obstacle avoidance scheme. The obstacle is put on the midway, or even further inward on purpose, of the previous no-obstacle optimal trajectory. For the minimum-time purpose, the trajectory grazes by the obstacle and the minimum-time motion successfully avoids the obstacle. The minimum-time is longer for the obstacle avoidance cases than the one without obstacle. The obstacle avoidance scheme can deal with multiple obstacles in any ellipsoid forms by using artificial potential fields as penalty functions via distance functions. The method is promising in solving collision-free optimal control problems for robotics and can be applied to any DOF robotic manipulators with any performance indices and mobile robots as well. Since this method generates optimum solution based on Pontryagin Extremum Principle, rather than based on assumptions, the results provide a benchmark against which any optimization techniques can be measured.

Research on robot mobile obstacle avoidance control based on visual information

NASA Astrophysics Data System (ADS)

Jin, Jiang

2018-03-01

Robots to detect obstacles and control robots to avoid obstacles has been a key research topic of robot control. In this paper, a scheme of visual information acquisition is proposed. By judging visual information, the visual information is transformed into the information source of path processing. In accordance with the established route, in the process of encountering obstacles, the algorithm real-time adjustment trajectory to meet the purpose of intelligent control of mobile robots. Simulation results show that, through the integration of visual sensing information, the obstacle information is fully obtained, while the real-time and accuracy of the robot movement control is guaranteed.

ASYMPTOTIC STEADY-STATE SOLUTION TO A BOW SHOCK WITH AN INFINITE MACH NUMBER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yalinewich, Almog; Sari, Re’em

2016-08-01

The problem of a cold gas flowing past a stationary obstacle is considered. We study the bow shock that forms around the obstacle and show that at large distances from the obstacle the shock front forms a parabolic solid of revolution. The profiles of the hydrodynamic variables in the interior of the shock are obtained by solution of the hydrodynamic equations in parabolic coordinates. The results are verified with a hydrodynamic simulation. The drag force on the obstacle is also calculated. Finally, we use these results to model the bow shock around an isolated neutron star.

Recognition of an obstacle in a flow using artificial neural networks.

PubMed

Carrillo, Mauricio; Que, Ulices; González, José A; López, Carlos

2017-08-01

In this work a series of artificial neural networks (ANNs) has been developed with the capacity to estimate the size and location of an obstacle obstructing the flow in a pipe. The ANNs learn the size and location of the obstacle by reading the profiles of the dynamic pressure q or the x component of the velocity v_{x} of the fluid at a certain distance from the obstacle. Data to train the ANN were generated using numerical simulations with a two-dimensional lattice Boltzmann code. We analyzed various cases varying both the diameter and the position of the obstacle on the y axis, obtaining good estimations using the R^{2} coefficient for the cases under study. Although the ANN showed problems with the classification of very small obstacles, the general results show a very good capacity for prediction.

A Stochastic Approach to Path Planning in the Weighted-Region Problem

DTIC Science & Technology

1991-03-01

polynomial time. However, the polyhedrons in this three-dimensional obstacle-avoidance problem are all obstacles (i.e. travel is not permitted within...them). Therefore, optimal paths tend to avoid their vertices, and settle into closest approach tangents across polyhedron edges. So, in a sense...intersection update map database with new vertex for this edge 3. IF (C1 > D) and (C2 > D) THEN edge intersects ellipse at two points OR edge is

Road-Following Formation Control of Autonomous Ground Vehicles

NASA Technical Reports Server (NTRS)

Ono, Masahiro; Droge, Greg; Grip, Havard; Toupet, Olivier; Scrapper, Chris; Rahmani, Amir

2015-01-01

This work presents a novel cooperative path planning for formation keeping robots traversing along a road with obstacles and possible narrow passages. A unique challenge in this problem is a requirement for spatial and temporal coordination between vehicles while ensuring collision and obstacle avoidance.

Wheelchair Navigation System for Disabled and Elderly People

PubMed Central

Kim, Eun Yi

2016-01-01

An intelligent wheelchair (IW) system is developed in order to support safe mobility for disabled or elderly people with various impairments. The proposed IW offers two main functions: obstacle detection and avoidance, and situation recognition. First, through a combination of a vision sensor and eight ultrasonic ones, it detects diverse obstacles and produces occupancy grid maps (OGMs) that describe environmental information, including the positions and sizes of obstacles, which is then given to the learning-based algorithm. By learning the common patterns among OGMs assigned to the same directions, the IW can automatically find paths to prevent collisions with obstacles. Second, it distinguishes a situation whereby the user is standing on a sidewalk, traffic intersection, or roadway through analyzing the texture and shape of the images, which aids in preventing any accidents that would result in fatal injuries to the user, such as collisions with vehicles. From the experiments that were performed in various environments, we can prove the following: (1) the proposed system can recognize different types of outdoor places with 98.3% accuracy; and (2) it can produce paths that avoid obstacles with 92.0% accuracy. PMID:27801852

Women's orgasm obstacles: A qualitative study.

PubMed

Nekoolaltak, Maryam; Keshavarz, Zohreh; Simbar, Masoumeh; Nazari, Ali Mohammad; Baghestani, Ahmad Reza

2017-08-01

Woman's orgasm plays a vital role in sexual compatibility and marital satisfaction. Orgasm in women is a learnable phenomenon that is influenced by several factors. The aim of this study is exploring obstacles to orgasm in Iranian married women. This qualitative study with directed content analysis approach was conducted in 2015-2016, on 20 Iranian married women who were individually interviewed at two medical clinics in Tehran, Iran. Orgasm obstacles were explored in one category, 4 subcategories, and 25 codes. The main category was "Multidimensionality of women's orgasm obstacles". Subcategories and some codes included: Physical obstacles (wife's or husband's boredom, vaginal infection, insufficient vaginal lubrication), psychological obstacles (lack of sexual knowledge, shame, lack of concentration on sex due to household and children problems), relational obstacles (husband's hurry, having a dispute and annoyance with spouse) and contextual obstacles (Irregular sleep hours, lack of privacy and inability to separate children's bedroom from their parents, lack of peace at home). For prevention or treatment of female orgasm disorders, attention to physical factors is not enough. Obtaining a comprehensive history about physical, psychological, relational and contextual dimensions of woman's life is necessary.

Integrating obstacle avoidance, global path planning, visual cue detection, and landmark triangulation in a mobile robot

NASA Astrophysics Data System (ADS)

Kortenkamp, David; Huber, Marcus J.; Congdon, Clare B.; Huffman, Scott B.; Bidlack, Clint R.; Cohen, Charles J.; Koss, Frank V.; Raschke, Ulrich; Weymouth, Terry E.

1993-05-01

This paper describes the design and implementation of an integrated system for combining obstacle avoidance, path planning, landmark detection and position triangulation. Such an integrated system allows the robot to move from place to place in an environment, avoiding obstacles and planning its way out of traps, while maintaining its position and orientation using distinctive landmarks. The task the robot performs is to search a 22 m X 22 m arena for 10 distinctive objects, visiting each object in turn. This same task was recently performed by a dozen different robots at a competition in which the robot described in this paper finished first.

Early detection of pathological gambling: betting on GPs' beliefs and attitudes.

PubMed

Achab, Sophia; Chatton, Anne; Khan, Riaz; Thorens, Gabriel; Penzenstadler, Louise; Zullino, Daniele; Khazaal, Yasser

2014-01-01

Pathological gambling (PG) is an addictive disorder with harm related to the high psychiatric comorbidity and increased suicidal risk. Prevalence rates in general population range from 0.2% to 2.1%. Problem gamblers are hard to attract to treatment programs for several proper reasons and for obstacles (e.g., accessibility). To address these obstacles, primary care (where the problem gambling (PrG) prevalence seems to be 6.2%) has a crucial role to play (i.e., identifying and referring patients to specialized treatment programs and treating at first line when needed and possible) in the era of online gambling offer expansion. The present work aimed to collect data on resources in the field from GPs themselves, using a 24-item online questionnaire. Swiss French-speaking participants were asked about their screening practice and knowledge. The results state that the vast majority of them are aware of the existence and the potential impact of PrG on their patients. However, PrG screening is not systematic and their knowledge of adequate treatments or referral methods is scarce. GPs being central to health screening in general, targeted advice and training on short screening tools and better knowledge of referral pathways should be promoted and continued to empower the GP's management skills in a public health approach.

Obstacle Recognition Based on Machine Learning for On-Chip LiDAR Sensors in a Cyber-Physical System

PubMed Central

Beruvides, Gerardo

2017-01-01

Collision avoidance is an important feature in advanced driver-assistance systems, aimed at providing correct, timely and reliable warnings before an imminent collision (with objects, vehicles, pedestrians, etc.). The obstacle recognition library is designed and implemented to address the design and evaluation of obstacle detection in a transportation cyber-physical system. The library is integrated into a co-simulation framework that is supported on the interaction between SCANeR software and Matlab/Simulink. From the best of the authors’ knowledge, two main contributions are reported in this paper. Firstly, the modelling and simulation of virtual on-chip light detection and ranging sensors in a cyber-physical system, for traffic scenarios, is presented. The cyber-physical system is designed and implemented in SCANeR. Secondly, three specific artificial intelligence-based methods for obstacle recognition libraries are also designed and applied using a sensory information database provided by SCANeR. The computational library has three methods for obstacle detection: a multi-layer perceptron neural network, a self-organization map and a support vector machine. Finally, a comparison among these methods under different weather conditions is presented, with very promising results in terms of accuracy. The best results are achieved using the multi-layer perceptron in sunny and foggy conditions, the support vector machine in rainy conditions and the self-organized map in snowy conditions. PMID:28906450

Obstacle Recognition Based on Machine Learning for On-Chip LiDAR Sensors in a Cyber-Physical System.

PubMed

Castaño, Fernando; Beruvides, Gerardo; Haber, Rodolfo E; Artuñedo, Antonio

2017-09-14

Collision avoidance is an important feature in advanced driver-assistance systems, aimed at providing correct, timely and reliable warnings before an imminent collision (with objects, vehicles, pedestrians, etc.). The obstacle recognition library is designed and implemented to address the design and evaluation of obstacle detection in a transportation cyber-physical system. The library is integrated into a co-simulation framework that is supported on the interaction between SCANeR software and Matlab/Simulink. From the best of the authors' knowledge, two main contributions are reported in this paper. Firstly, the modelling and simulation of virtual on-chip light detection and ranging sensors in a cyber-physical system, for traffic scenarios, is presented. The cyber-physical system is designed and implemented in SCANeR. Secondly, three specific artificial intelligence-based methods for obstacle recognition libraries are also designed and applied using a sensory information database provided by SCANeR. The computational library has three methods for obstacle detection: a multi-layer perceptron neural network, a self-organization map and a support vector machine. Finally, a comparison among these methods under different weather conditions is presented, with very promising results in terms of accuracy. The best results are achieved using the multi-layer perceptron in sunny and foggy conditions, the support vector machine in rainy conditions and the self-organized map in snowy conditions.

Getting to Darwin: Obstacles to Accepting Evolution by Natural Selection

NASA Astrophysics Data System (ADS)

Thagard, Paul; Findlay, Scott

2010-06-01

Darwin’s theory of evolution by natural selection is central to modern biology, but is resisted by many people. This paper discusses the major psychological obstacles to accepting Darwin’s theory. Cognitive obstacles to adopting evolution by natural selection include conceptual difficulties, methodological issues, and coherence problems that derive from the intuitiveness of alternative theories. The main emotional obstacles to accepting evolution are its apparent conflict with valued beliefs about God, souls, and morality. We draw on the philosophy of science and on a psychological theory of cognitive and emotional belief revision to make suggestions about what can be done to improve acceptance of Darwinian ideas.

Orthogonal on-off control of radar pulses for the suppression of mutual interference

NASA Astrophysics Data System (ADS)

Kim, Yong Cheol

1998-10-01

Intelligent vehicles of the future will be guided by radars and other sensors to avoid obstacles. When multiple vehicles move simultaneously in autonomous navigational mode, mutual interference among car radars becomes a serious problem. An obstacle is illuminated with electromagnetic pulses from several radars. The signal at a radar receiver is actually a mixture of the self-reflection and the reflection of interfering pulses emitted by others. When standardized pulse- type radars are employed on vehicles for obstacle avoidance and so self-pulse and interfering pulses have identical pulse repetition interval, this SI (synchronous Interference) is very difficult to separate from the true reflection. We present a method of suppressing such a synchronous interference. By controlling the pulse emission of a radar in a binary orthogonal ON, OFF pattern, the true self-reflection can be separated from the false one. Two range maps are generated, TRM (true-reflection map) and SIM (synchronous- interference map). TRM is updated for every ON interval and SIM is updated for every OFF interval of the self-radar. SIM represents the SI of interfering radars while TRM keeps a record of a mixture of the true self-reflection and SI. Hence the true obstacles can be identified by the set subtraction operation. The performance of the proposed method is compared with that of the conventional M of N method. Bayesian analysis shows that the probability of false alarm is improved by order of 103 to approximately 106 while the deterioration in the probability of detection is negligible.

The Sensitivity Analysis for the Flow Past Obstacles Problem with Respect to the Reynolds Number

PubMed Central

Ito, Kazufumi; Li, Zhilin; Qiao, Zhonghua

2013-01-01

In this paper, numerical sensitivity analysis with respect to the Reynolds number for the flow past obstacle problem is presented. To carry out such analysis, at each time step, we need to solve the incompressible Navier-Stokes equations on irregular domains twice, one for the primary variables; the other is for the sensitivity variables with homogeneous boundary conditions. The Navier-Stokes solver is the augmented immersed interface method for Navier-Stokes equations on irregular domains. One of the most important contribution of this paper is that our analysis can predict the critical Reynolds number at which the vortex shading begins to develop in the wake of the obstacle. Some interesting experiments are shown to illustrate how the critical Reynolds number varies with different geometric settings. PMID:24910780

The Sensitivity Analysis for the Flow Past Obstacles Problem with Respect to the Reynolds Number.

PubMed

Ito, Kazufumi; Li, Zhilin; Qiao, Zhonghua

2012-02-01

In this paper, numerical sensitivity analysis with respect to the Reynolds number for the flow past obstacle problem is presented. To carry out such analysis, at each time step, we need to solve the incompressible Navier-Stokes equations on irregular domains twice, one for the primary variables; the other is for the sensitivity variables with homogeneous boundary conditions. The Navier-Stokes solver is the augmented immersed interface method for Navier-Stokes equations on irregular domains. One of the most important contribution of this paper is that our analysis can predict the critical Reynolds number at which the vortex shading begins to develop in the wake of the obstacle. Some interesting experiments are shown to illustrate how the critical Reynolds number varies with different geometric settings.

Persuasive Pedagogy: A New Paradigm for Mathematics Education

ERIC Educational Resources Information Center

Hennessey, Maeghan N.; Higley, Kelli; Chesnut, Steven R.

2012-01-01

Mathematics teachers face a myriad of instructional obstacles. Since the early 1990s, mathematics education researchers have proposed the use of constructivist practices to counteract these ever-prevalent obstacles. While we do give credit to the choices of instructional activities the constructivist paradigm promotes, there are problems with its…

Obstacle avoidance and concealed target detection using the Army Research Lab ultra-wideband synchronous impulse reconstruction (UWB SIRE) forward imaging radar

NASA Astrophysics Data System (ADS)

Nguyen, Lam; Wong, David; Ressler, Marc; Koenig, Francois; Stanton, Brian; Smith, Gregory; Sichina, Jeffrey; Kappra, Karl

2007-04-01

The U.S. Army Research Laboratory (ARL), as part of a mission and customer funded exploratory program, has developed a new low-frequency, ultra-wideband (UWB) synthetic aperture radar (SAR) for forward imaging to support the Army's vision of an autonomous navigation system for robotic ground vehicles. These unmanned vehicles, equipped with an array of imaging sensors, will be tasked to help detect man-made obstacles such as concealed targets, enemy minefields, and booby traps, as well as other natural obstacles such as ditches, and bodies of water. The ability of UWB radar technology to help detect concealed objects has been documented in the past and could provide an important obstacle avoidance capability for autonomous navigation systems, which would improve the speed and maneuverability of these vehicles and consequently increase the survivability of the U. S. forces on the battlefield. One of the primary features of the radar is the ability to collect and process data at combat pace in an affordable, compact, and lightweight package. To achieve this, the radar is based on the synchronous impulse reconstruction (SIRE) technique where several relatively slow and inexpensive analog-to-digital (A/D) converters are used to sample the wide bandwidth of the radar signals. We conducted an experiment this winter at Aberdeen Proving Ground (APG) to support the phenomenological studies of the backscatter from positive and negative obstacles for autonomous robotic vehicle navigation, as well as the detection of concealed targets of interest to the Army. In this paper, we briefly describe the UWB SIRE radar and the test setup in the experiment. We will also describe the signal processing and the forward imaging techniques used in the experiment. Finally, we will present imagery of man-made obstacles such as barriers, concertina wires, and mines.

Bionic Vision-Based Intelligent Power Line Inspection System

PubMed Central

Ma, Yunpeng; He, Feijia; Xu, Jinxin

2017-01-01

Detecting the threats of the external obstacles to the power lines can ensure the stability of the power system. Inspired by the attention mechanism and binocular vision of human visual system, an intelligent power line inspection system is presented in this paper. Human visual attention mechanism in this intelligent inspection system is used to detect and track power lines in image sequences according to the shape information of power lines, and the binocular visual model is used to calculate the 3D coordinate information of obstacles and power lines. In order to improve the real time and accuracy of the system, we propose a new matching strategy based on the traditional SURF algorithm. The experimental results show that the system is able to accurately locate the position of the obstacles around power lines automatically, and the designed power line inspection system is effective in complex backgrounds, and there are no missing detection instances under different conditions. PMID:28203269

Mapping a Path to Autonomous Flight in the National Airspace

NASA Technical Reports Server (NTRS)

Lodding, Kenneth N.

2011-01-01

The introduction of autonomous flight, whether military, commercial, or civilian, into the National Airspace System (NAS) will present significant challenges. Minimizing the impact and preventing the changes from becoming disruptive, rather than an enhancing technology will not be without difficulty. From obstacle detection and avoidance to real-time verification and validation of system behavior, there are significant problems which must be solved prior to the general acceptance of autonomous systems. This paper examines some of the key challenges and the multi-disciplinary collaboration which must occur for autonomous systems to be accepted as equal partners in the NAS.

Planification de trajectoires pour une flotte d'UAVs

NASA Astrophysics Data System (ADS)

Ait El Cadi, Abdessamad

In this thesis we address the problem of coordinating and controlling a fleet of Unmanned Aerial Vehicles (UAVs) during a surveillance mission in a dynamic context. The problem is vast and is related to several scientific domains. We have studied three important parts of this problem: • modeling the ground with all its constraints; • computing a shortest non-holonomic continuous path in a risky environment with a presence of obstacles; • planning a surveillance mission for a fleet of UAVs in a real context. While investigating the scientific literature related to these topics, we have detected deficiencies in the modeling of the ground and in the computation of the shortest continuous path, two critical aspects for the planning of a mission. So after the literature review, we have proposed answers to these two aspects and have applied our developments to the planning of a mission of a fleet of UAVs in a risky environment with the presence of obstacles. Obstacles could be natural like mountain or any non flyable zone. We have first modeled the ground as a directed graph. However, instead of using a classic mesh, we opted for an intelligent modeling that reduces the computing time on the graph without losing accuracy. The proposed model is based on the concept of visibility graph, and it also takes into account the obstacles, the danger areas and the constraint of non-holonomy of the UAVs- the kinematic constraint of the planes that imposes a maximum steering angle. The graph is then cleaned to keep only the minimum information needed for the calculation of trajectories. The generation of this graph possibly requires a lot of computation time, but it is done only once before the planning and will not affect the performance of trajectory calculations. We have also developed another simpler graph that does not take into account the constraint of non-holonomy. The advantage of this second graph is that it reduces the computation time. However, it requires the use of a correction procedure to make the resulting trajectory non-holonomic. This correction is possible within the context of our missions, but not for all types of autonomous vehicles. Once the directed graph is generated, we propose the use of a procedure for calculating the shortest continuous non-holonomic path in a risky environment with the presence of obstacles. The directed graph already incorporates all the constraints, which makes it possible to model the problem as a shortest path problem with resource a resource constraint (the resource here is the amount of permitted risk). The results are very satisfactory since the resulting routes are non-holonomic paths that meet all constraints. Moreover, the computing time is very short. For cases based on the simpler graph, we have created a procedure for correcting the trajectory to make it non-holonomic. All calculations of non-holonomy are based on Dubins curves (1957). We have finally applied our results to the planning of a mission of a fleet of UAVs in a risky environment with the presence of obstacles. For this purpose, we have developed a directed multi-graph where, for each pair of targets (points of departure and return of the mission included), we calculate a series of shorter trajectories with different limits of risk -- from the risk-free path to the riskiest path. We then use a Tabu Search with two tabu lists. Using these procedures, we have been able to produce routes for a fleet of UAVs that minimize the cost of the mission while respecting the limit of risk and avoiding obstacles. Tests are conducted on examples created on the basis of descriptions given by the Canadian Defense and, also on some instances of the CVRP (Capacitated Vehicle Routing Problem), those described by Christofides et Elion and those described by Christofides, Mingozzi et Toth. The results are of very satisfactory since all trajectories are non-holonomic and the improvement of the objective, when compared to a simple constructive method, achieves in some cases between 10 % and 43 %. We have even obtained an improvement of 69 %, but on a poor solution generated by a greedy algorithm. (Abstract shortened by UMI.)

Cross-Disciplinary Consultancy to Bridge Public Health Technical Needs and Analytic Developers: Asyndromic Surveillance Use Case

PubMed Central

Faigen, Zachary; Deyneka, Lana; Ising, Amy; Neill, Daniel; Conway, Mike; Fairchild, Geoffrey; Gunn, Julia; Swenson, David; Painter, Ian; Johnson, Lauren; Kiley, Chris; Streichert, Laura

2015-01-01

Introduction: We document a funded effort to bridge the gap between constrained scientific challenges of public health surveillance and methodologies from academia and industry. Component tasks are the collection of epidemiologists’ use case problems, multidisciplinary consultancies to refine them, and dissemination of problem requirements and shareable datasets. We describe an initial use case and consultancy as a concrete example and challenge to developers. Materials and Methods: Supported by the Defense Threat Reduction Agency Biosurveillance Ecosystem project, the International Society for Disease Surveillance formed an advisory group to select tractable use case problems and convene inter-disciplinary consultancies to translate analytic needs into well-defined problems and to promote development of applicable solution methods. The initial consultancy’s focus was a problem originated by the North Carolina Department of Health and its NC DETECT surveillance system: Derive a method for detection of patient record clusters worthy of follow-up based on free-text chief complaints and without syndromic classification. Results: Direct communication between public health problem owners and analytic developers was informative to both groups and constructive for the solution development process. The consultancy achieved refinement of the asyndromic detection challenge and of solution requirements. Participants summarized and evaluated solution approaches and discussed dissemination and collaboration strategies. Practice Implications: A solution meeting the specification of the use case described above could improve human monitoring efficiency with expedited warning of events requiring follow-up, including otherwise overlooked events with no syndromic indicators. This approach can remove obstacles to collaboration with efficient, minimal data-sharing and without costly overhead. PMID:26834939

Cross-Disciplinary Consultancy to Bridge Public Health Technical Needs and Analytic Developers: Asyndromic Surveillance Use Case.

PubMed

Faigen, Zachary; Deyneka, Lana; Ising, Amy; Neill, Daniel; Conway, Mike; Fairchild, Geoffrey; Gunn, Julia; Swenson, David; Painter, Ian; Johnson, Lauren; Kiley, Chris; Streichert, Laura; Burkom, Howard

2015-01-01

We document a funded effort to bridge the gap between constrained scientific challenges of public health surveillance and methodologies from academia and industry. Component tasks are the collection of epidemiologists' use case problems, multidisciplinary consultancies to refine them, and dissemination of problem requirements and shareable datasets. We describe an initial use case and consultancy as a concrete example and challenge to developers. Supported by the Defense Threat Reduction Agency Biosurveillance Ecosystem project, the International Society for Disease Surveillance formed an advisory group to select tractable use case problems and convene inter-disciplinary consultancies to translate analytic needs into well-defined problems and to promote development of applicable solution methods. The initial consultancy's focus was a problem originated by the North Carolina Department of Health and its NC DETECT surveillance system: Derive a method for detection of patient record clusters worthy of follow-up based on free-text chief complaints and without syndromic classification. Direct communication between public health problem owners and analytic developers was informative to both groups and constructive for the solution development process. The consultancy achieved refinement of the asyndromic detection challenge and of solution requirements. Participants summarized and evaluated solution approaches and discussed dissemination and collaboration strategies. A solution meeting the specification of the use case described above could improve human monitoring efficiency with expedited warning of events requiring follow-up, including otherwise overlooked events with no syndromic indicators. This approach can remove obstacles to collaboration with efficient, minimal data-sharing and without costly overhead.

Speeded Reaching Movements around Invisible Obstacles

PubMed Central

Hudson, Todd E.; Wolfe, Uta; Maloney, Laurence T.

2012-01-01

We analyze the problem of obstacle avoidance from a Bayesian decision-theoretic perspective using an experimental task in which reaches around a virtual obstacle were made toward targets on an upright monitor. Subjects received monetary rewards for touching the target and incurred losses for accidentally touching the intervening obstacle. The locations of target-obstacle pairs within the workspace were varied from trial to trial. We compared human performance to that of a Bayesian ideal movement planner (who chooses motor strategies maximizing expected gain) using the Dominance Test employed in Hudson et al. (2007). The ideal movement planner suffers from the same sources of noise as the human, but selects movement plans that maximize expected gain in the presence of that noise. We find good agreement between the predictions of the model and actual performance in most but not all experimental conditions. PMID:23028276

Mandatory Reporting and School Counselors: Reporting Laws, Obstacles, and Solutions

ERIC Educational Resources Information Center

Valkyrie, Karena T.; Creamer, D. Andrew; Vaughn, Leila

2008-01-01

Child abuse and neglect is a serious problem across our nation, and the consequences can be far reaching. Laws were enacted to address child abuse and identify mandatory reporters, including school counselors. In the literature, school counselors regularly report systemic and personal obstacles that influence their compliance with the mandatory…

Obstacles to Gender Parity in Engineering Education

ERIC Educational Resources Information Center

Rohatynskyj, Marta; Davidson, Valerie; Stiver, Warren; Hayward, Maren

2008-01-01

Low rates of women's enrolment in engineering programs has been identified as a global problem within the general concern to enable women to attain parity in education in all areas. A Western women in engineering meta-narrative is identified which contains a complex of obstacles that typify the situation of Western women. The question is asked…

The Berlin Wall of Language: The Problem and Solution.

ERIC Educational Resources Information Center

Burroughs, Evelyn

1969-01-01

Several obstacles to social and intellectual growth confront the disadvantaged student whose nonstandard dialect is unacceptable to many users of standard English. To help him develop a bidialectalism that minimizes these obstacles, the English teacher needs to guide the student to explore the ways in which language conveys meaning; to experience…

Children in the Urban Environment. Linking Social Policy and Clinical Practice.

ERIC Educational Resources Information Center

Phillips, Norma Kolko, Ed.; Straussner, Shulamith Lala Ashenberg, Ed.

The 12 chapters of this volume offer a comprehensive portrait of today's children and their challenging urban environments. The opportunities and obstacles that confront children are examined in detail, and key social problems are discussed in the following contributions: (1) "Growing Up in the Urban Environment: Opportunities and Obstacles for…

Self-Tuning Method for Increased Obstacle Detection Reliability Based on Internet of Things LiDAR Sensor Models

PubMed Central

2018-01-01

On-chip LiDAR sensors for vehicle collision avoidance are a rapidly expanding area of research and development. The assessment of reliable obstacle detection using data collected by LiDAR sensors has become a key issue that the scientific community is actively exploring. The design of a self-tuning methodology and its implementation are presented in this paper, to maximize the reliability of LiDAR sensors network for obstacle detection in the ‘Internet of Things’ (IoT) mobility scenarios. The Webots Automobile 3D simulation tool for emulating sensor interaction in complex driving environments is selected in order to achieve that objective. Furthermore, a model-based framework is defined that employs a point-cloud clustering technique, and an error-based prediction model library that is composed of a multilayer perceptron neural network, and k-nearest neighbors and linear regression models. Finally, a reinforcement learning technique, specifically a Q-learning method, is implemented to determine the number of LiDAR sensors that are required to increase sensor reliability for obstacle localization tasks. In addition, a IoT driving assistance user scenario, connecting a five LiDAR sensor network is designed and implemented to validate the accuracy of the computational intelligence-based framework. The results demonstrated that the self-tuning method is an appropriate strategy to increase the reliability of the sensor network while minimizing detection thresholds. PMID:29748521

Self-Tuning Method for Increased Obstacle Detection Reliability Based on Internet of Things LiDAR Sensor Models.

PubMed

Castaño, Fernando; Beruvides, Gerardo; Villalonga, Alberto; Haber, Rodolfo E

2018-05-10

On-chip LiDAR sensors for vehicle collision avoidance are a rapidly expanding area of research and development. The assessment of reliable obstacle detection using data collected by LiDAR sensors has become a key issue that the scientific community is actively exploring. The design of a self-tuning methodology and its implementation are presented in this paper, to maximize the reliability of LiDAR sensors network for obstacle detection in the 'Internet of Things' (IoT) mobility scenarios. The Webots Automobile 3D simulation tool for emulating sensor interaction in complex driving environments is selected in order to achieve that objective. Furthermore, a model-based framework is defined that employs a point-cloud clustering technique, and an error-based prediction model library that is composed of a multilayer perceptron neural network, and k-nearest neighbors and linear regression models. Finally, a reinforcement learning technique, specifically a Q-learning method, is implemented to determine the number of LiDAR sensors that are required to increase sensor reliability for obstacle localization tasks. In addition, a IoT driving assistance user scenario, connecting a five LiDAR sensor network is designed and implemented to validate the accuracy of the computational intelligence-based framework. The results demonstrated that the self-tuning method is an appropriate strategy to increase the reliability of the sensor network while minimizing detection thresholds.

Stereo and photometric image sequence interpretation for detecting negative obstacles using active gaze control and performing an autonomous jink

NASA Astrophysics Data System (ADS)

Hofmann, Ulrich; Siedersberger, Karl-Heinz

2003-09-01

Driving cross-country, the detection and state estimation relative to negative obstacles like ditches and creeks is mandatory for safe operation. Very often, ditches can be detected both by different photometric properties (soil vs. vegetation) and by range (disparity) discontinuities. Therefore, algorithms should make use of both the photometric and geometric properties to reliably detect obstacles. This has been achieved in UBM's EMS-Vision System (Expectation-based, Multifocal, Saccadic) for autonomous vehicles. The perception system uses Sarnoff's image processing hardware for real-time stereo vision. This sensor provides both gray value and disparity information for each pixel at high resolution and framerates. In order to perform an autonomous jink, the boundaries of an obstacle have to be measured accurately for calculating a safe driving trajectory. Especially, ditches are often very extended, so due to the restricted field of vision of the cameras, active gaze control is necessary to explore the boundaries of an obstacle. For successful measurements of image features the system has to satisfy conditions defined by the perception expert. It has to deal with the time constraints of the active camera platform while performing saccades and to keep the geometric conditions defined by the locomotion expert for performing a jink. Therefore, the experts have to cooperate. This cooperation is controlled by a central decision unit (CD), which has knowledge about the mission and the capabilities available in the system and of their limitations. The central decision unit reacts dependent on the result of situation assessment by starting, parameterizing or stopping actions (instances of capabilities). The approach has been tested with the 5-ton van VaMoRs. Experimental results will be shown for driving in a typical off-road scenario.

Obstacle Detection in Indoor Environment for Visually Impaired Using Mobile Camera

NASA Astrophysics Data System (ADS)

Rahman, Samiur; Ullah, Sana; Ullah, Sehat

2018-01-01

Obstacle detection can improve the mobility as well as the safety of visually impaired people. In this paper, we present a system using mobile camera for visually impaired people. The proposed algorithm works in indoor environment and it uses a very simple technique of using few pre-stored floor images. In indoor environment all unique floor types are considered and a single image is stored for each unique floor type. These floor images are considered as reference images. The algorithm acquires an input image frame and then a region of interest is selected and is scanned for obstacle using pre-stored floor images. The algorithm compares the present frame and the next frame and compute mean square error of the two frames. If mean square error is less than a threshold value α then it means that there is no obstacle in the next frame. If mean square error is greater than α then there are two possibilities; either there is an obstacle or the floor type is changed. In order to check if the floor is changed, the algorithm computes mean square error of next frame and all stored floor types. If minimum of mean square error is less than a threshold value α then flour is changed otherwise there exist an obstacle. The proposed algorithm works in real-time and 96% accuracy has been achieved.

Optimal motion planning using navigation measure

NASA Astrophysics Data System (ADS)

Vaidya, Umesh

2018-05-01

We introduce navigation measure as a new tool to solve the motion planning problem in the presence of static obstacles. Existence of navigation measure guarantees collision-free convergence at the final destination set beginning with almost every initial condition with respect to the Lebesgue measure. Navigation measure can be viewed as a dual to the navigation function. While the navigation function has its minimum at the final destination set and peaks at the obstacle set, navigation measure takes the maximum value at the destination set and is zero at the obstacle set. A linear programming formalism is proposed for the construction of navigation measure. Set-oriented numerical methods are utilised to obtain finite dimensional approximation of this navigation measure. Application of the proposed navigation measure-based theoretical and computational framework is demonstrated for a motion planning problem in a complex fluid flow.

On the Measure and the Structure of the Free Boundary of the Lower Dimensional Obstacle Problem

NASA Astrophysics Data System (ADS)

Focardi, Matteo; Spadaro, Emanuele

2018-04-01

We provide a thorough description of the free boundary for the lower dimensional obstacle problem in R^{n+1} up to sets of null H^{n-1} measure. In particular, we prove (i) local finiteness of the (n-1)-dimensional Hausdorff measure of the free boundary, (ii) H^{n-1}-rectifiability of the free boundary, (iii) classification of the frequencies up to a set of Hausdorff dimension at most (n-2) and classification of the blow-ups at H^{n-1} almost every free boundary point.

Proceedings of the Image Understanding Workshop (18th) Held in Cambridge, Massachusetts on 6-8 April 1988. Volume 2

DTIC Science & Technology

1988-04-01

solution to a information. There is thus a biological motivation for investi- specific problem, e.g., solving the visual obstacle avoidance gating the...narticular practically motivated aspect of the image, known as the optical flow, does not necessarily the general problem. correspond to the 2-D motion...on (Z Z * "inexact" vision jThom8fi] The obvious motivation stems from a = X tancosa b - Z tan3sina; (1) the fact that an obstacle in relative motion

Laser radar system for obstacle avoidance

NASA Astrophysics Data System (ADS)

Bers, Karlheinz; Schulz, Karl R.; Armbruster, Walter

2005-09-01

The threat of hostile surveillance and weapon systems require military aircraft to fly under extreme conditions such as low altitude, high speed, poor visibility and incomplete terrain information. The probability of collision with natural and man-made obstacles during such contour missions is high if detection capability is restricted to conventional vision aids. Forward-looking scanning laser radars which are build by the EADS company and presently being flight tested and evaluated at German proving grounds, provide a possible solution, having a large field of view, high angular and range resolution, a high pulse repetition rate, and sufficient pulse energy to register returns from objects at distances of military relevance with a high hit-and-detect probability. The development of advanced 3d-scene analysis algorithms had increased the recognition probability and reduced the false alarm rate by using more readily recognizable objects such as terrain, poles, pylons, trees, etc. to generate a parametric description of the terrain surface as well as the class, position, orientation, size and shape of all objects in the scene. The sensor system and the implemented algorithms can be used for other applications such as terrain following, autonomous obstacle avoidance, and automatic target recognition. This paper describes different 3D-imaging ladar sensors with unique system architecture but different components matched for different military application. Emphasis is laid on an obstacle warning system with a high probability of detection of thin wires, the real time processing of the measured range image data, obstacle classification und visualization.

Sediment problems in urban areas

USGS Publications Warehouse

Guy, Harold P.

1970-01-01

One obstacle to a scientific recognition and an engineering solution to sediment-related environmental problems is that such problems are bound in conflicting and generally undefinable political and institutional restraints. Also, some of the difficulty may involve the fact that the scientist or engineer, because of his relatively narrow field of investigation, cannot always completely envision the less desirable effects of his work and communicate alternative solutions to the public. For example, the highway and motor-vehicle engineers have learned how to provide the means by which one can transport himself from one point to another with such great efficiency that a person's employment in this country is now commonly more than 5 miles from his residence. However, providing such efficient personal transport has created numerous serious environmental problems. Obstacles to recognition of and action to control sediment problems in and around urban areas are akin to other environmental problems with respect to the many scientific, engineering, economic, and social aspects.

Distance estimation and collision prediction for on-line robotic motion planning

NASA Technical Reports Server (NTRS)

Kyriakopoulos, K. J.; Saridis, G. N.

1991-01-01

An efficient method for computing the minimum distance and predicting collisions between moving objects is presented. This problem has been incorporated in the framework of an in-line motion planning algorithm to satisfy collision avoidance between a robot and moving objects modeled as convex polyhedra. In the beginning the deterministic problem, where the information about the objects is assumed to be certain is examined. If instead of the Euclidean norm, L(sub 1) or L(sub infinity) norms are used to represent distance, the problem becomes a linear programming problem. The stochastic problem is formulated, where the uncertainty is induced by sensing and the unknown dynamics of the moving obstacles. Two problems are considered: (1) filtering of the minimum distance between the robot and the moving object, at the present time; and (2) prediction of the minimum distance in the future, in order to predict possible collisions with the moving obstacles and estimate the collision time.

Three-dimensional obstacle classification in laser range data

NASA Astrophysics Data System (ADS)

Armbruster, Walter; Bers, Karl-Heinz

1998-10-01

The threat of hostile surveillance and weapon systems require military aircraft to fly under extreme conditions such as low altitude, high speed, poor visibility and incomplete terrain information. The probability of collision with natural and man-made obstacles during such contour missions is high if detection capability is restricted to conventional vision aids. Forward-looking scanning laser rangefinders which are presently being flight tested and evaluated at German proving grounds, provide a possible solution, having a large field of view, high angular and range resolution, a high pulse repetition rate, and sufficient pulse energy to register returns from wires at over 500 m range (depends on the system) with a high hit-and-detect probability. Despite the efficiency of the sensor, acceptance of current obstacle warning systems by test pilots is not very high, mainly due to the systems' inadequacies in obstacle recognition and visualization. This has motivated the development and the testing of more advanced 3d-scene analysis algorithm at FGAN-FIM to replace the obstacle recognition component of current warning systems. The basic ideas are to increase the recognition probability and to reduce the false alarm rate for hard-to-extract obstacles such as wires, by using more readily recognizable objects such as terrain, poles, pylons, trees, etc. by implementing a hierarchical classification procedure to generate a parametric description of the terrain surface as well as the class, position, orientation, size and shape of all objects in the scene. The algorithms can be used for other applications such as terrain following, autonomous obstacle avoidance, and automatic target recognition.

Path planning for mobile robot using the novel repulsive force algorithm

NASA Astrophysics Data System (ADS)

Sun, Siyue; Yin, Guoqiang; Li, Xueping

2018-01-01

A new type of repulsive force algorithm is proposed to solve the problem of local minimum and the target unreachable of the classic Artificial Potential Field (APF) method in this paper. The Gaussian function that is related to the distance between the robot and the target is added to the traditional repulsive force, solving the problem of the goal unreachable with the obstacle nearby; variable coefficient is added to the repulsive force component to resize the repulsive force, which can solve the local minimum problem when the robot, the obstacle and the target point are in the same line. The effectiveness of the algorithm is verified by simulation based on MATLAB and actual mobile robot platform.

Obstacles and problems of ethical leadership from the perspective of nursing leaders: a qualitative content analysis.

PubMed

Barkhordari-Sharifabad, Maasoumeh; Ashktorab, Tahereh; Atashzadeh-Shoorideh, Foroozan

2017-01-01

In the nursing profession, leadership plays a significant role in creating motivation and thus enabling nurses to provide high quality care. Ethics is an essential component of leadership qualifications and the ethical leader can help create an ethical atmosphere, offer ethical guidance, and ensure the occupational satisfaction of personnel through prioritizing moralities. However, some issues prevent the implementation of this type of leadership by nursing leaders. The aim of this study was to identify and describe some problems and obstacles in ethical leadership faced by nursing leaders, and to help them achieve more accurate information and broader perspective in this field. The present study was conducted using a qualitative approach and content analysis. A total of 14 nursing managers and educators were selected purposefully, and deep and semi-structured interviews were conducted with them. Content analysis was performed using an inductive approach. Three main categories were obtained after data analysis: ethical, cultural and managerial problems. "Ethical problems" pertain to doubt in ethical actions, ethical conflicts and ethical distress; "cultural problems" include organizational and social culture; and "managerial problems" are connected to organizational and staff-related issues. Nursing leaders put forth various aspects of the problems associated with ethical leadership in the clinical setting. This style of leadership could be promoted by developing suitable programs and providing clear-cut strategies for removing the current obstacles and correcting the organizational structure. This can lead to ethical improvement in nursing leaders and subsequently the nurses.

Validation of vision-based obstacle detection algorithms for low-altitude helicopter flight

NASA Technical Reports Server (NTRS)

Suorsa, Raymond; Sridhar, Banavar

1991-01-01

A validation facility being used at the NASA Ames Research Center is described which is aimed at testing vision based obstacle detection and range estimation algorithms suitable for low level helicopter flight. The facility is capable of processing hundreds of frames of calibrated multicamera 6 degree-of-freedom motion image sequencies, generating calibrated multicamera laboratory images using convenient window-based software, and viewing range estimation results from different algorithms along with truth data using powerful window-based visualization software.

Aviation obstacle auto-extraction using remote sensing information

NASA Astrophysics Data System (ADS)

Zimmer, N.; Lugsch, W.; Ravenscroft, D.; Schiefele, J.

2008-10-01

An Obstacle, in the aviation context, may be any natural, man-made, fixed or movable object, permanent or temporary. Currently, the most common way to detect relevant aviation obstacles from an aircraft or helicopter for navigation purposes and collision avoidance is the use of merged infrared and synthetic information of obstacle data. Several algorithms have been established to utilize synthetic and infrared images to generate obstacle information. There might be a situation however where the system is error-prone and may not be able to consistently determine the current environment. This situation can be avoided when the system knows the true position of the obstacle. The quality characteristics of the obstacle data strongly depends on the quality of the source data such as maps and official publications. In some countries such as newly industrializing and developing countries, quality and quantity of obstacle information is not available. The aviation world has two specifications - RTCA DO-276A and ICAO ANNEX 15 Ch. 10 - which describe the requirements for aviation obstacles. It is essential to meet these requirements to be compliant with the specifications and to support systems based on these specifications, e.g. 3D obstacle warning systems where accurate coordinates based on WGS-84 is a necessity. Existing aerial and satellite or soon to exist high quality remote sensing data makes it feasible to think about automated aviation obstacle data origination. This paper will describe the feasibility to auto-extract aviation obstacles from remote sensing data considering limitations of image and extraction technologies. Quality parameters and possible resolution of auto-extracted obstacle data will be discussed and presented.

A Probabilistic-Numerical Approximation for an Obstacle Problem Arising in Game Theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gruen, Christine, E-mail: christine.gruen@univ-brest.fr

We investigate a two-player zero-sum stochastic differential game in which one of the players has more information on the game than his opponent. We show how to construct numerical schemes for the value function of this game, which is given by the solution of a quasilinear partial differential equation with obstacle.

Epistemological Obstacles on the Topic of Ratio and Proportion among Junior High School Students

NASA Astrophysics Data System (ADS)

Wahyuningrum, A. S.; Suryadi, D.; Turmudi

2017-09-01

This study intends to investigate how students’ understanding of ratio and proportion concept indicates epistemological obstacles. It was part of Didactical Design Research which was conducted to 72 students of 8th grade who ever learned about ratio and proportion. Data were collected through the students’ answers and interview in solving ratio and proportion problems. The results show that students’ conception, the ways of applying other mathematical concepts, the ways of using the rules, and variety of contexts are factors influencing epistemological obstacles in teaching and learning of ratio and proportion. These conditions can affect the students’ understanding o f related mathematics topics. Based on analysis of the results, this study is expected to overcome or minimize the epistemological obstacles.

Effect of cane length and swing arc width on drop-off and obstacle detection with the long cane

PubMed Central

Kim, Dae Shik; Emerson, Robert Wall; Naghshineh, Koorosh

2017-01-01

A repeated-measures design with block randomization was used for the study, in which 15 adults with visual impairments attempted to detect the drop-offs and obstacles with the canes of different lengths, swinging the cane in different widths (narrow vs wide). Participants detected the drop-offs significantly more reliably with the standard-length cane (79.5% ± 6.5% of the time) than with the extended-length cane (67.6% ± 9.1%), p <.001. The drop-off detection threshold of the standard-length cane (4.1 ± 1.1 cm) was also significantly smaller than that of the extended-length cane (6.5±1.8cm), p <.001. In addition, participants detected drop-offs at a significantly higher percentage when they swung the cane approximately 3 cm beyond the widest part of the body (78.6% ± 7.6%) than when they swung it substantially wider (30 cm; 68.5% ± 8.3%), p <.001. In contrast, neither cane length (p =.074) nor cane swing arc width (p =.185) had a significant effect on obstacle detection performance. The findings of the study may help orientation and mobility specialists recommend appropriate cane length and cane swing arc width to visually impaired cane users. PMID:29276326

Effect of cane length and swing arc width on drop-off and obstacle detection with the long cane.

PubMed

Kim, Dae Shik; Emerson, Robert Wall; Naghshineh, Koorosh

2017-09-01

A repeated-measures design with block randomization was used for the study, in which 15 adults with visual impairments attempted to detect the drop-offs and obstacles with the canes of different lengths, swinging the cane in different widths (narrow vs wide). Participants detected the drop-offs significantly more reliably with the standard-length cane (79.5% ± 6.5% of the time) than with the extended-length cane (67.6% ± 9.1%), p <.001. The drop-off detection threshold of the standard-length cane (4.1 ± 1.1 cm) was also significantly smaller than that of the extended-length cane (6.5±1.8cm), p <.001. In addition, participants detected drop-offs at a significantly higher percentage when they swung the cane approximately 3 cm beyond the widest part of the body (78.6% ± 7.6%) than when they swung it substantially wider (30 cm; 68.5% ± 8.3%), p <.001. In contrast, neither cane length ( p =.074) nor cane swing arc width ( p =.185) had a significant effect on obstacle detection performance. The findings of the study may help orientation and mobility specialists recommend appropriate cane length and cane swing arc width to visually impaired cane users.

Learning robotic eye-arm-hand coordination from human demonstration: a coupled dynamical systems approach.

PubMed

Lukic, Luka; Santos-Victor, José; Billard, Aude

2014-04-01

We investigate the role of obstacle avoidance in visually guided reaching and grasping movements. We report on a human study in which subjects performed prehensile motion with obstacle avoidance where the position of the obstacle was systematically varied across trials. These experiments suggest that reaching with obstacle avoidance is organized in a sequential manner, where the obstacle acts as an intermediary target. Furthermore, we demonstrate that the notion of workspace travelled by the hand is embedded explicitly in a forward planning scheme, which is actively involved in detecting obstacles on the way when performing reaching. We find that the gaze proactively coordinates the pattern of eye-arm motion during obstacle avoidance. This study provides also a quantitative assessment of the coupling between the eye-arm-hand motion. We show that the coupling follows regular phase dependencies and is unaltered during obstacle avoidance. These observations provide a basis for the design of a computational model. Our controller extends the coupled dynamical systems framework and provides fast and synchronous control of the eyes, the arm and the hand within a single and compact framework, mimicking similar control system found in humans. We validate our model for visuomotor control of a humanoid robot.

Collective effects in force generation by multiple cytoskeletal filaments pushing an obstacle

NASA Astrophysics Data System (ADS)

Aparna, J. S.; Das, Dipjyoti; Padinhateeri, Ranjith; Das, Dibyendu

2015-09-01

We report here recent findings that multiple cytoskeletal filaments (assumed rigid) pushing an obstacle typically generate more force than just the sum of the forces due to individual ones. This interesting phenomenon, due to the hydrolysis process being out of equilibrium, escaped attention in previous experimental and theoretical literature. We first demonstrate this numerically within a constant force ensemble, for a well known model of cytoskeletal filament dynamics with random mechanism of hydrolysis. Two methods of detecting the departure from additivity of the collective stall force, namely from the force-velocity curve in the growing phase, and from the average collapse time versus force curve in the bounded phase, is discussed. Since experiments have already been done for a similar system of multiple microtubules in a harmonic optical trap, we study the problem theoretically under harmonic force. We show that within the varying harmonic force ensemble too, the mean collective stall force of N filaments is greater than N times the mean stall force due to a single filament; the actual extent of departure is a function of the monomer concentration.

Dynamic clearance measure to evaluate locomotor and perceptuo-motor strategies used for obstacle circumvention in a virtual environment.

PubMed

Darekar, Anuja; Lamontagne, Anouk; Fung, Joyce

2015-04-01

Circumvention around an obstacle entails a dynamic interaction with the obstacle to maintain a safe clearance. We used a novel mathematical interpolation method based on the modified Shepard's method of Inverse Distance Weighting to compute dynamic clearance that reflected this interaction as well as minimal clearance. This proof-of-principle study included seven young healthy, four post-stroke and four healthy age-matched individuals. A virtual environment designed to assess obstacle circumvention was used to administer a locomotor (walking) and a perceptuo-motor (navigation with a joystick) task. In both tasks, participants were asked to navigate towards a target while avoiding collision with a moving obstacle that approached from either head-on, or 30° left or right. Among young individuals, dynamic clearance did not differ significantly between obstacle approach directions in both tasks. Post-stroke individuals maintained larger and smaller dynamic clearance during the locomotor and the perceptuo-motor task respectively as compared to age-matched controls. Dynamic clearance was larger than minimal distance from the obstacle irrespective of the group, task and obstacle approach direction. Also, in contrast to minimal distance, dynamic clearance can respond differently to different avoidance behaviors. Such a measure can be beneficial in contrasting obstacle avoidance behaviors in different populations with mobility problems. Copyright © 2015 Elsevier B.V. All rights reserved.

Generic Dynamic Environment Perception Using Smart Mobile Devices.

PubMed

Danescu, Radu; Itu, Razvan; Petrovai, Andra

2016-10-17

The driving environment is complex and dynamic, and the attention of the driver is continuously challenged, therefore computer based assistance achieved by processing image and sensor data may increase traffic safety. While active sensors and stereovision have the advantage of obtaining 3D data directly, monocular vision is easy to set up, and can benefit from the increasing computational power of smart mobile devices, and from the fact that almost all of them come with an embedded camera. Several driving assistance application are available for mobile devices, but they are mostly targeted for simple scenarios and a limited range of obstacle shapes and poses. This paper presents a technique for generic, shape independent real-time obstacle detection for mobile devices, based on a dynamic, free form 3D representation of the environment: the particle based occupancy grid. Images acquired in real time from the smart mobile device's camera are processed by removing the perspective effect and segmenting the resulted bird-eye view image to identify candidate obstacle areas, which are then used to update the occupancy grid. The occupancy grid tracked cells are grouped into obstacles depicted as cuboids having position, size, orientation and speed. The easy to set up system is able to reliably detect most obstacles in urban traffic, and its measurement accuracy is comparable to a stereovision system.

Short range laser obstacle detector. [for surface vehicles using laser diode array

NASA Technical Reports Server (NTRS)

Kuriger, W. L. (Inventor)

1973-01-01

A short range obstacle detector for surface vehicles is described which utilizes an array of laser diodes. The diodes operate one at a time, with one diode for each adjacent azimuth sector. A vibrating mirror a short distance above the surface provides continuous scanning in elevation for all azimuth sectors. A diode laser is synchronized with the vibrating mirror to enable one diode laser to be fired, by pulses from a clock pulse source, a number of times during each elevation scan cycle. The time for a given pulse of light to be reflected from an obstacle and received is detected as a measure of range to the obstacle.

Middle School Students' Reasoning in Nonlinear Proportional Problems in Geometry

ERIC Educational Resources Information Center

Ayan, Rukiye; Isiksal Bostan, Mine

2018-01-01

In this study, we investigate sixth, seventh, and eighth grade students' achievement in nonlinear (quadratic or cubic) proportional problems regarding length, area, and volume of enlarged figures. In addition, we examine students' solution strategies for the problems and obstacles that prevent students from answering the problems correctly by…

Two arm robot path planning in a static environment using polytopes and string stretching. Thesis

NASA Technical Reports Server (NTRS)

Schima, Francis J., III

1990-01-01

The two arm robot path planning problem has been analyzed and reduced into components to be simplified. This thesis examines one component in which two Puma-560 robot arms are simultaneously holding a single object. The problem is to find a path between two points around obstacles which is relatively fast and minimizes the distance. The thesis involves creating a structure on which to form an advanced path planning algorithm which could ideally find the optimum path. An actual path planning method is implemented which is simple though effective in most common situations. Given the limits of computer technology, a 'good' path is currently found. Objects in the workspace are modeled with polytopes. These are used because they can be used for rapid collision detection and still provide a representation which is adequate for path planning.

Women’s orgasm obstacles: A qualitative study

PubMed Central

Nekoolaltak, Maryam; Keshavarz, Zohreh; Simbar, Masoumeh; Nazari, Ali Mohammad; Baghestani, Ahmad Reza

2017-01-01

Background: Woman’s orgasm plays a vital role in sexual compatibility and marital satisfaction. Orgasm in women is a learnable phenomenon that is influenced by several factors. Objective: The aim of this study is exploring obstacles to orgasm in Iranian married women. Materials and Methods: This qualitative study with directed content analysis approach was conducted in 2015-2016, on 20 Iranian married women who were individually interviewed at two medical clinics in Tehran, Iran. Results: Orgasm obstacles were explored in one category, 4 subcategories, and 25 codes. The main category was “Multidimensionality of women’s orgasm obstacles”. Subcategories and some codes included: Physical obstacles (wife’s or husband’s boredom, vaginal infection, insufficient vaginal lubrication), psychological obstacles (lack of sexual knowledge, shame, lack of concentration on sex due to household and children problems), relational obstacles (husband’s hurry, having a dispute and annoyance with spouse) and contextual obstacles (Irregular sleep hours, lack of privacy and inability to separate children’s bedroom from their parents, lack of peace at home). Conclusion: For prevention or treatment of female orgasm disorders, attention to physical factors is not enough. Obtaining a comprehensive history about physical, psychological, relational and contextual dimensions of woman’s life is necessary. PMID:29082366

Hierarchical Shared Control of Cane-Type Walking-Aid Robot

PubMed Central

Tao, Chunjing

2017-01-01

A hierarchical shared-control method of the walking-aid robot for both human motion intention recognition and the obstacle emergency-avoidance method based on artificial potential field (APF) is proposed in this paper. The human motion intention is obtained from the interaction force measurements of the sensory system composed of 4 force-sensing registers (FSR) and a torque sensor. Meanwhile, a laser-range finder (LRF) forward is applied to detect the obstacles and try to guide the operator based on the repulsion force calculated by artificial potential field. An obstacle emergency-avoidance method which comprises different control strategies is also assumed according to the different states of obstacles or emergency cases. To ensure the user's safety, the hierarchical shared-control method combines the intention recognition method with the obstacle emergency-avoidance method based on the distance between the walking-aid robot and the obstacles. At last, experiments validate the effectiveness of the proposed hierarchical shared-control method. PMID:29093805

A problem of optimal control and observation for distributed homogeneous multi-agent system

NASA Astrophysics Data System (ADS)

Kruglikov, Sergey V.

2017-12-01

The paper considers the implementation of a algorithm for controlling a distributed complex of several mobile multi-robots. The concept of a unified information space of the controlling system is applied. The presented information and mathematical models of participants and obstacles, as real agents, and goals and scenarios, as virtual agents, create the base forming the algorithmic and software background for computer decision support system. The controlling scheme assumes the indirect management of the robotic team on the basis of optimal control and observation problem predicting intellectual behavior in a dynamic, hostile environment. A basic content problem is a compound cargo transportation by a group of participants in the case of a distributed control scheme in the terrain with multiple obstacles.

Mission Specification and Control for Unmanned Aerial and Ground Vehicles for Indoor Target Discovery and Tracking

DTIC Science & Technology

2010-01-01

open garage leading to the building interior. The UAV is positioned north of a potential ingress to the building. As the mission begins, the UAV...camera, the difficulty in detecting and navigating around obstacles using this non- stereo camera necessitated a precomputed map of all obstacles and

Substance Abuse: A Hidden Problem within the D/deaf and Hard of Hearing Communities

ERIC Educational Resources Information Center

Guthmann, Debra; Graham, Vicki

2004-01-01

Current research indicates that D/deaf and hard of hearing clients seeking treatment for substance abuse often encounter obstacles in receiving the help they need. Many of these obstacles are the result of a lack of knowledge and experience with regard to treating D/deaf and hard of hearing people. Programs designed for hearing people that attempt…

Model Predictive Control considering Reachable Range of Wheels for Leg / Wheel Mobile Robots

NASA Astrophysics Data System (ADS)

Suzuki, Naito; Nonaka, Kenichiro; Sekiguchi, Kazuma

2016-09-01

Obstacle avoidance is one of the important tasks for mobile robots. In this paper, we study obstacle avoidance control for mobile robots equipped with four legs comprised of three DoF SCARA leg/wheel mechanism, which enables the robot to change its shape adapting to environments. Our previous method achieves obstacle avoidance by model predictive control (MPC) considering obstacle size and lateral wheel positions. However, this method does not ensure existence of joint angles which achieves reference wheel positions calculated by MPC. In this study, we propose a model predictive control considering reachable mobile ranges of wheels positions by combining multiple linear constraints, where each reachable mobile range is approximated as a convex trapezoid. Thus, we achieve to formulate a MPC as a quadratic problem with linear constraints for nonlinear problem of longitudinal and lateral wheel position control. By optimization of MPC, the reference wheel positions are calculated, while each joint angle is determined by inverse kinematics. Considering reachable mobile ranges explicitly, the optimal joint angles are calculated, which enables wheels to reach the reference wheel positions. We verify its advantages by comparing the proposed method with the previous method through numerical simulations.

The didactic situation in geometry learning based on analysis of learning obstacles and learning trajectory

NASA Astrophysics Data System (ADS)

Sulistyowati, Fitria; Budiyono, Slamet, Isnandar

2017-12-01

This study aims to design a didactic situation based on the analysis of learning obstacles and learning trajectory on prism volume. The type of this research is qualitative and quantitative research with steps: analyzing the learning obstacles and learning trajectory, preparing the didactic situation, applying the didactic situation in the classroom, mean difference test of problem solving ability with t-test statistic. The subjects of the study were 8th grade junior high school students in Magelang 2016/2017 selected randomly from eight existing classes. The result of this research is the design of didactic situations that can be implemented in prism volume learning. The effectiveness of didactic situations that have been designed is shown by the mean difference test that is the problem solving ability of the students after the application of the didactic situation better than before the application. The didactic situation that has been generated is expected to be a consideration for teachers to design lessons that match the character of learners, classrooms and teachers themselves, so that the potential thinking of learners can be optimized to avoid the accumulation of learning obstacles.

The Role of Content Knowledge in Ill-Structured Problem Solving for High School Physics Students

NASA Astrophysics Data System (ADS)

Milbourne, Jeff; Wiebe, Eric

2018-02-01

While Physics Education Research has a rich tradition of problem-solving scholarship, most of the work has focused on more traditional, well-defined problems. Less work has been done with ill-structured problems, problems that are better aligned with the engineering and design-based scenarios promoted by the Next Generation Science Standards. This study explored the relationship between physics content knowledge and ill-structured problem solving for two groups of high school students with different levels of content knowledge. Both groups of students completed an ill-structured problem set, using a talk-aloud procedure to narrate their thought process as they worked. Analysis of the data focused on identifying students' solution pathways, as well as the obstacles that prevented them from reaching "reasonable" solutions. Students with more content knowledge were more successful reaching reasonable solutions for each of the problems, experiencing fewer obstacles. These students also employed a greater variety of solution pathways than those with less content knowledge. Results suggest that a student's solution pathway choice may depend on how she perceives the problem.

Obstacle penetrating dynamic radar imaging system

DOEpatents

Romero, Carlos E [Livermore, CA; Zumstein, James E [Livermore, CA; Chang, John T [Danville, CA; Leach, Jr Richard R. [Castro Valley, CA

2006-12-12

An obstacle penetrating dynamic radar imaging system for the detection, tracking, and imaging of an individual, animal, or object comprising a multiplicity of low power ultra wideband radar units that produce a set of return radar signals from the individual, animal, or object, and a processing system for said set of return radar signals for detection, tracking, and imaging of the individual, animal, or object. The system provides a radar video system for detecting and tracking an individual, animal, or object by producing a set of return radar signals from the individual, animal, or object with a multiplicity of low power ultra wideband radar units, and processing said set of return radar signals for detecting and tracking of the individual, animal, or object.

Kelvin-Helmholtz instability of the Dirac fluid of charge carriers on graphene

NASA Astrophysics Data System (ADS)

Coelho, Rodrigo C. V.; Mendoza, Miller; Doria, Mauro M.; Herrmann, Hans J.

2017-11-01

We provide numerical evidence that a Kelvin-Helmholtz instability occurs in the Dirac fluid of electrons in graphene and can be detected in current experiments. This instability appears for electrons in the viscous regime passing though a micrometer-scale obstacle and affects measurements on the time scale of nanoseconds. A possible realization with a needle-shaped obstacle is proposed to produce and detect this instability by measuring the electric potential difference between contact points located before and after the obstacle. We also show that, for our setup, the Kelvin-Helmholtz instability leads to the formation of whirlpools similar to the ones reported in Bandurin et al. [Science 351, 1055 (2016), 10.1126/science.aad0201]. To perform the simulations, we develop a lattice Boltzmann method able to recover the full dissipation in a fluid of massless particles.

A parallel implementation of a multisensor feature-based range-estimation method

NASA Technical Reports Server (NTRS)

Suorsa, Raymond E.; Sridhar, Banavar

1993-01-01

There are many proposed vision based methods to perform obstacle detection and avoidance for autonomous or semi-autonomous vehicles. All methods, however, will require very high processing rates to achieve real time performance. A system capable of supporting autonomous helicopter navigation will need to extract obstacle information from imagery at rates varying from ten frames per second to thirty or more frames per second depending on the vehicle speed. Such a system will need to sustain billions of operations per second. To reach such high processing rates using current technology, a parallel implementation of the obstacle detection/ranging method is required. This paper describes an efficient and flexible parallel implementation of a multisensor feature-based range-estimation algorithm, targeted for helicopter flight, realized on both a distributed-memory and shared-memory parallel computer.

The research of autonomous obstacle avoidance of mobile robot based on multi-sensor integration

NASA Astrophysics Data System (ADS)

Zhao, Ming; Han, Baoling

2016-11-01

The object of this study is the bionic quadruped mobile robot. The study has proposed a system design plan for mobile robot obstacle avoidance with the binocular stereo visual sensor and the self-control 3D Lidar integrated with modified ant colony optimization path planning to realize the reconstruction of the environmental map. Because the working condition of a mobile robot is complex, the result of the 3D reconstruction with a single binocular sensor is undesirable when feature points are few and the light condition is poor. Therefore, this system integrates the stereo vision sensor blumblebee2 and the Lidar sensor together to detect the cloud information of 3D points of environmental obstacles. This paper proposes the sensor information fusion technology to rebuild the environment map. Firstly, according to the Lidar data and visual data on obstacle detection respectively, and then consider two methods respectively to detect the distribution of obstacles. Finally fusing the data to get the more complete, more accurate distribution of obstacles in the scene. Then the thesis introduces ant colony algorithm. It has analyzed advantages and disadvantages of the ant colony optimization and its formation cause deeply, and then improved the system with the help of the ant colony optimization to increase the rate of convergence and precision of the algorithm in robot path planning. Such improvements and integrations overcome the shortcomings of the ant colony optimization like involving into the local optimal solution easily, slow search speed and poor search results. This experiment deals with images and programs the motor drive under the compiling environment of Matlab and Visual Studio and establishes the visual 2.5D grid map. Finally it plans a global path for the mobile robot according to the ant colony algorithm. The feasibility and effectiveness of the system are confirmed by ROS and simulation platform of Linux.

Real-time obstacle avoidance using harmonic potential functions

NASA Technical Reports Server (NTRS)

Kim, Jin-Oh; Khosla, Pradeep K.

1992-01-01

This paper presents a new formulation of the artificial potential approach to the obstacle avoidance problem for a mobile robot or a manipulator in a known environment. Previous formulations of artificial potentials for obstacle avoidance have exhibited local minima in a cluttered environment. To build an artificial potential field, harmonic functions that completely eliminate local minima even for a cluttered environment are used. The panel method is employed to represent arbitrarily shaped obstacles and to derive the potential over the whole space. Based on this potential function, an elegant control strategy is proposed for the real-time control of a robot. The harmonic potential, the panel method, and the control strategy are tested with a bar-shaped mobile robot and a three-degree-of-freedom planar redundant manipulator.

Pigeon interaction mode switch-based UAV distributed flocking control under obstacle environments.

PubMed

Qiu, Huaxin; Duan, Haibin

2017-11-01

Unmanned aerial vehicle (UAV) flocking control is a serious and challenging problem due to local interactions and changing environments. In this paper, a pigeon flocking model and a pigeon coordinated obstacle-avoiding model are proposed based on a behavior that pigeon flocks will switch between hierarchical and egalitarian interaction mode at different flight phases. Owning to the similarity between bird flocks and UAV swarms in essence, a distributed flocking control algorithm based on the proposed pigeon flocking and coordinated obstacle-avoiding models is designed to coordinate a heterogeneous UAV swarm to fly though obstacle environments with few informed individuals. The comparative simulation results are elaborated to show the feasibility, validity and superiority of our proposed algorithm. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Ultrasonic Array for Obstacle Detection Based on CDMA with Kasami Codes

PubMed Central

Diego, Cristina; Hernández, Álvaro; Jiménez, Ana; Álvarez, Fernando J.; Sanz, Rebeca; Aparicio, Joaquín

2011-01-01

This paper raises the design of an ultrasonic array for obstacle detection based on Phased Array (PA) techniques, which steers the acoustic beam through the environment by electronics rather than mechanical means. The transmission of every element in the array has been encoded, according to Code Division for Multiple Access (CDMA), which allows multiple beams to be transmitted simultaneously. All these features together enable a parallel scanning system which does not only improve the image rate but also achieves longer inspection distances in comparison with conventional PA techniques. PMID:22247675

Multi-Section Sensing and Vibrotactile Perception for Walking Guide of Visually Impaired Person.

PubMed

Jeong, Gu-Young; Yu, Kee-Ho

2016-07-12

Electronic Travel Aids (ETAs) improve the mobility of visually-impaired persons, but it is not easy to develop an ETA satisfying all the factors needed for reliable object detection, effective notification, and actual usability. In this study, the authors developed an easy-to-use ETA having the function of reliable object detection and its successful feedback to the user by tactile stimulation. Seven ultrasonic sensors facing in different directions detect obstacles in the walking path, while vibrators in the tactile display stimulate the hand according to the distribution of obstacles. The detection of ground drop-offs activates the electromagnetic brakes linked to the rear wheels. To verify the feasibility of the developed ETA in the outdoor environment, walking tests by blind participants were performed, and the evaluation of safety to ground drop-offs was carried out. From the experiment, the feasibility of the developed ETA was shown to be sufficient if the sensor ranges for hanging obstacle detection is improved and learning time is provided for the ETA. Finally, the light-weight and low cost ETA designed and assembled based on the evaluation of the developed ETA is introduced to show the improvement of portability and usability, and is compared with the previously developed ETAs.

Multi-Section Sensing and Vibrotactile Perception for Walking Guide of Visually Impaired Person

PubMed Central

Jeong, Gu-Young; Yu, Kee-Ho

2016-01-01

Electronic Travel Aids (ETAs) improve the mobility of visually-impaired persons, but it is not easy to develop an ETA satisfying all the factors needed for reliable object detection, effective notification, and actual usability. In this study, the authors developed an easy-to-use ETA having the function of reliable object detection and its successful feedback to the user by tactile stimulation. Seven ultrasonic sensors facing in different directions detect obstacles in the walking path, while vibrators in the tactile display stimulate the hand according to the distribution of obstacles. The detection of ground drop-offs activates the electromagnetic brakes linked to the rear wheels. To verify the feasibility of the developed ETA in the outdoor environment, walking tests by blind participants were performed, and the evaluation of safety to ground drop-offs was carried out. From the experiment, the feasibility of the developed ETA was shown to be sufficient if the sensor ranges for hanging obstacle detection is improved and learning time is provided for the ETA. Finally, the light-weight and low cost ETA designed and assembled based on the evaluation of the developed ETA is introduced to show the improvement of portability and usability, and is compared with the previously developed ETAs. PMID:27420060

Wide-Baseline Stereo-Based Obstacle Mapping for Unmanned Surface Vehicles

PubMed Central

Mou, Xiaozheng; Wang, Han

2018-01-01

This paper proposes a wide-baseline stereo-based static obstacle mapping approach for unmanned surface vehicles (USVs). The proposed approach eliminates the complicated calibration work and the bulky rig in our previous binocular stereo system, and raises the ranging ability from 500 to 1000 m with a even larger baseline obtained from the motion of USVs. Integrating a monocular camera with GPS and compass information in this proposed system, the world locations of the detected static obstacles are reconstructed while the USV is traveling, and an obstacle map is then built. To achieve more accurate and robust performance, multiple pairs of frames are leveraged to synthesize the final reconstruction results in a weighting model. Experimental results based on our own dataset demonstrate the high efficiency of our system. To the best of our knowledge, we are the first to address the task of wide-baseline stereo-based obstacle mapping in a maritime environment. PMID:29617293

Collective strategy for obstacle navigation during cooperative transport by ants.

PubMed

McCreery, Helen F; Dix, Zachary A; Breed, Michael D; Nagpal, Radhika

2016-11-01

Group cohesion and consensus have primarily been studied in the context of discrete decisions, but some group tasks require making serial decisions that build on one another. We examine such collective problem solving by studying obstacle navigation during cooperative transport in ants. In cooperative transport, ants work together to move a large object back to their nest. We blocked cooperative transport groups of Paratrechina longicornis with obstacles of varying complexity, analyzing groups' trajectories to infer what kind of strategy the ants employed. Simple strategies require little information, but more challenging, robust strategies succeed with a wider range of obstacles. We found that transport groups use a stochastic strategy that leads to efficient navigation around simple obstacles, and still succeeds at difficult obstacles. While groups navigating obstacles preferentially move directly toward the nest, they change their behavior over time; the longer the ants are obstructed, the more likely they are to move away from the nest. This increases the chance of finding a path around the obstacle. Groups rapidly changed directions and rarely stalled during navigation, indicating that these ants maintain consensus even when the nest direction is blocked. Although some decisions were aided by the arrival of new ants, at many key points, direction changes were initiated within the group, with no apparent external cause. This ant species is highly effective at navigating complex environments, and implements a flexible strategy that works for both simple and more complex obstacles. © 2016. Published by The Company of Biologists Ltd.

Japan’s Rearmament Dilemma: Obstacles to Rearmament.

DTIC Science & Technology

1980-01-01

aircraft carrier Enterprise, and the problems with the first Japanese nuclear -powered ship , the Mutsu , have continued to keep the issue of nuclear weapons...4 Formation of the Psychology. .. ............... 4 Nuclear Allergy .. .................... 7 Self-Defense Force .. ................... 10 ARTICLE 9... nuclear weapons, would elicit a strong reaction from the U.S. This specter of the U.S. reaction is another obstacle to rearmament. While most scholars

Navigation integrity monitoring and obstacle detection for enhanced-vision systems

NASA Astrophysics Data System (ADS)

Korn, Bernd; Doehler, Hans-Ullrich; Hecker, Peter

2001-08-01

Typically, Enhanced Vision (EV) systems consist of two main parts, sensor vision and synthetic vision. Synthetic vision usually generates a virtual out-the-window view using databases and accurate navigation data, e. g. provided by differential GPS (DGPS). The reliability of the synthetic vision highly depends on both, the accuracy of the used database and the integrity of the navigation data. But especially in GPS based systems, the integrity of the navigation can't be guaranteed. Furthermore, only objects that are stored in the database can be displayed to the pilot. Consequently, unexpected obstacles are invisible and this might cause severe problems. Therefore, additional information has to be extracted from sensor data to overcome these problems. In particular, the sensor data analysis has to identify obstacles and has to monitor the integrity of databases and navigation. Furthermore, if a lack of integrity arises, navigation data, e.g. the relative position of runway and aircraft, has to be extracted directly from the sensor data. The main contribution of this paper is about the realization of these three sensor data analysis tasks within our EV system, which uses the HiVision 35 GHz MMW radar of EADS, Ulm as the primary EV sensor. For the integrity monitoring, objects extracted from radar images are registered with both database objects and objects (e. g. other aircrafts) transmitted via data link. This results in a classification into known and unknown radar image objects and consequently, in a validation of the integrity of database and navigation. Furthermore, special runway structures are searched for in the radar image where they should appear. The outcome of this runway check contributes to the integrity analysis, too. Concurrent to this investigation a radar image based navigation is performed without using neither precision navigation nor detailed database information to determine the aircraft's position relative to the runway. The performance of our approach is demonstrated with real data acquired during extensive flight tests to several airports in Northern Germany.

Nonlinear water waves generated by impulsive motion of submerged obstacle

NASA Astrophysics Data System (ADS)

Makarenko, N.; Kostikov, V.

2012-04-01

The fully nonlinear problem on generation of unsteady water waves by impulsively moving obstacle is studied analytically. The method involves the reduction of basic Euler equations to the integral-differential system for the wave elevation together with normal and tangential fluid velocities at the free surface. Exact model equations are derived in explicit form when the isolated obstacle is presented by totally submerged circular- or elliptic cylinder. Small-time asymptotic solution is constructed for the cylinder which starts moving with constant acceleration from rest. It is demonstrated that the leading-order solution terms describe several wave regimes such as the formation of non-stationary splash jets by vertical rising or vertical submersion of the obstacle, as well as the generation of diverging waves by horizontal- and combined motion of the obstacle under free surface. This work was supported by RFBR (grant No 10-01-00447) and by Research Program of the Russian Government (grant No 11.G34.31.0035).

Field testing of two electronic mobility aid devices for persons who are deaf-blind.

PubMed

Vincent, Claude; Routhier, François; Martel, Valérie; Mottard, Marie-Ève; Dumont, Frédéric; Côté, Lise; Cloutier, Danielle

2014-09-01

To test a methodology for assessing the effects of electronic mobility aid devices (EMAD) on the mobility of persons who are deaf-blind in real-life situations. A single-subject desing was done with four users followed in a program for persons who are deaf-blind. Participants were trained to use two commercial EMADs: the Miniguide and the Breeze. The Canadian Measure of Occupational Performance (CMOP) was administered before training (T1), after training (T2) and three months later (T3). The Quebec User Evaluation of Satisfaction with assistive Technology (QUEST) was administered at T2 and T3. A follow-up interview was conducted with the participants and clinicians at T3 to evaluate the benefits of the EMAD and any problems. CMOP suggests that both performance and satisfaction improved following the use of both EMADs in four occupations (functional mobility, active leisure, community life and socialization). QUEST indicates high satisfaction with eight items except for one participant. Follow-up interviews revealed a wide variety of perceptions regarding EMAD use and seven problems although CMOP and QUEST indicated good satisfaction. A high satisfaction score on QUEST does not necessarily imply that an assistive device is efficient in all circumstances; follow-up interviews provided important complementary information. For people who are deaf-blind The Miniguide is reliable for detecting obstacles (vibrations are sent as a warning when approaching an obstacle). It is often used to know if taking the right route. It identifies entrances or openings (indicated by the vibrations stopping when pointing at a wall), which can replace the echo-location for blind persons with hearing impairments. The Miniguide helped to locate overhanging objects which are not detectable with a long cane. The Breeze can record landmarks for orientation and it possible to use those landmarks to go back alone later after taking a certain route for the first time with someone else. It helps to familiarize the person with new places. It can tell you where you are at any time. It helps with orientation and the participant also liked this feature because it helped with learning street names. The Miniguide and the Breeze were not efficient in all circumstances; there were some problems with the ergonomic (both), detecting snow banks (Miniguide), sensitiveness to the surroundings in crowded places (Miniguide) and exactitude for geo-localization (Breeze).

Generic Dynamic Environment Perception Using Smart Mobile Devices

PubMed Central

Danescu, Radu; Itu, Razvan; Petrovai, Andra

2016-01-01

The driving environment is complex and dynamic, and the attention of the driver is continuously challenged, therefore computer based assistance achieved by processing image and sensor data may increase traffic safety. While active sensors and stereovision have the advantage of obtaining 3D data directly, monocular vision is easy to set up, and can benefit from the increasing computational power of smart mobile devices, and from the fact that almost all of them come with an embedded camera. Several driving assistance application are available for mobile devices, but they are mostly targeted for simple scenarios and a limited range of obstacle shapes and poses. This paper presents a technique for generic, shape independent real-time obstacle detection for mobile devices, based on a dynamic, free form 3D representation of the environment: the particle based occupancy grid. Images acquired in real time from the smart mobile device’s camera are processed by removing the perspective effect and segmenting the resulted bird-eye view image to identify candidate obstacle areas, which are then used to update the occupancy grid. The occupancy grid tracked cells are grouped into obstacles depicted as cuboids having position, size, orientation and speed. The easy to set up system is able to reliably detect most obstacles in urban traffic, and its measurement accuracy is comparable to a stereovision system. PMID:27763501

Characterizing Protein Complexes with UV absorption, Light Scattering, and Refractive Index Detection.

NASA Astrophysics Data System (ADS)

Trainoff, Steven

2009-03-01

Many modern pharmaceuticals and naturally occurring biomolecules consist of complexes of proteins and polyethylene glycol or carbohydrates. In the case of vaccine development, these complexes are often used to induce or amplify immune responses. For protein therapeutics they are used to modify solubility and function, or to control the rate of degradation and elimination of a drug from the body. Characterizing the stoichiometry of these complexes is an important industrial problem that presents a formidable challenge to analytical instrument designers. Traditional analytical methods, such as using florescent tagging, chemical assays, and mass spectrometry perturb the system so dramatically that the complexes are often destroyed or uncontrollably modified by the measurement. A solution to this problem consists of fractionating the samples and then measuring the fractions using sequential non-invasive detectors that are sensitive to different components of the complex. We present results using UV absorption, which is primarily sensitive to the protein fraction, Light Scattering, which measures the total weight average molar mass, and Refractive Index detection, which measures the net concentration. We also present a solution of the problem inter-detector band-broadening problem that has heretofore made this approach impractical. Presented will be instrumentation and an analysis method that overcome these obstacles and make this technique a reliable and robust way of non-invasively characterizing these industrially important compounds.

Two Formal Gas Models For Multi-Agent Sweeping and Obstacle Avoidance

NASA Technical Reports Server (NTRS)

Kerr, Wesley; Spears, Diana; Spears, William; Thayer, David

2004-01-01

The task addressed here is a dynamic search through a bounded region, while avoiding multiple large obstacles, such as buildings. In the case of limited sensors and communication, maintaining spatial coverage - especially after passing the obstacles - is a challenging problem. Here, we investigate two physics-based approaches to solving this task with multiple simulated mobile robots, one based on artificial forces and the other based on the kinetic theory of gases. The desired behavior is achieved with both methods, and a comparison is made between them. Because both approaches are physics-based, formal assurances about the multi-robot behavior are straightforward, and are included in the paper.

The Problem of Democratizing Higher Education in Latin America.

ERIC Educational Resources Information Center

Bernheim, Carlos Tunnermann

1979-01-01

Investigates obstacles to democratization of higher education in Latin America including inflexible structures at primary and secondary levels, strict social stratification, financial problems of students from poor families, and lack of diversification in postsecondary institutions. (Author/DB)

Dynamic Distributed Cooperative Control of Multiple Heterogeneous Resources

DTIC Science & Technology

2012-10-01

of the UAVs to maximize the total sensor footprint over the region of interest. The algorithm utilized to solve this problem was based on sampling a...and moving obstacles. Obstacle positions were assumed known a priori. Kingston and Beard [22] presented an algorithm to keep moving UAVs equally spaced...Planning Algorithms , Cambridge University Press, 2006. 11. Ma, C. S. and Miller, R. H., “Mixed integer linear programming trajectory generation for

Reply to ``Comment on `Free surface Hele-Shaw flows around an obstacle: A random walk simulation' ''

NASA Astrophysics Data System (ADS)

Bogoyavlenskiy, Vladislav A.; Cotts, Eric J.

2007-09-01

As pointed out by Vasconcelos in his Comment, our computer simulations of Hele-Shaw flows around series of wedges differ from analytical solutions existing for this problem. We attribute the discrepancy to the notion that these analytical solutions correspond to ideal, steady-state flow regimes which are hardly applicable when a rigid obstacle interacts with a moving liquid-gas interface.

A comparative study on managers', staffs' and clients' viewpoints about organizational and structural obstacles in family planning counseling in health-care centers in Isfahan in 2012.

PubMed

Taheri, Safoura; Ehsanpour, Soheila; Kohan, Shahnaz

2014-03-01

Organizational and structural obstacles are a group of major obstacles in achievement of appropriate family planning counseling. Detection of these obstacles from the viewpoint of managers, staffs and clients who are key members in health services providing system is a major step toward appropriate planning to modify or delete this group of obstacles. The present study was conducted with the goal of comparing managers', staffs' and clients' viewpoints about organizational and structural obstacles in family planning counseling in health-care centers in Isfahan in 2012. This is a cross-sectional one-step three-group comparative descriptive study conducted on 295 subjects including 59 managers, 110 staffs and 126 clients in medical health-care centers in Isfahan in 2012. Managers and the staffs were selected by census sampling and the clients were recruited through convenient random sampling. The date collection tool was a researcher made questionnaire, which was designed in two sections of fertility and personal characteristics and viewpoint measurement. Descriptive and inferential statistical test were used to analyze the data. The obtained results showed no significant difference between mean scores of viewpoints in three groups of managers, staffs and clients concerning organizational and structural obstacles in family planning counseling (P = 0.677). In addition, most of the managers, staffs and clients reported organizational and structural obstacles as the obstacles in the process of family planning in moderate level. The results showed the necessity of health services managers' planning to modify or delete organizational and structural obstacles especially the agreed obstacles from the viewpoint of managers, staffs and clients.

Safe Local Navigation for Visually Impaired Users With a Time-of-Flight and Haptic Feedback Device.

PubMed

Katzschmann, Robert K; Araki, Brandon; Rus, Daniela

2018-03-01

This paper presents ALVU (Array of Lidars and Vibrotactile Units), a contactless, intuitive, hands-free, and discreet wearable device that allows visually impaired users to detect low- and high-hanging obstacles, as well as physical boundaries in their immediate environment. The solution allows for safe local navigation in both confined and open spaces by enabling the user to distinguish free space from obstacles. The device presented is composed of two parts: a sensor belt and a haptic strap. The sensor belt is an array of time-of-flight distance sensors worn around the front of a user's waist, and the pulses of infrared light provide reliable and accurate measurements of the distances between the user and surrounding obstacles or surfaces. The haptic strap communicates the measured distances through an array of vibratory motors worn around the user's upper abdomen, providing haptic feedback. The linear vibration motors are combined with a point-loaded pretensioned applicator to transmit isolated vibrations to the user. We validated the device's capability in an extensive user study entailing 162 trials with 12 blind users. Users wearing the device successfully walked through hallways, avoided obstacles, and detected staircases.

Performance Characterization of Obstacle Detection Algorithms for Aircraft Navigation

NASA Technical Reports Server (NTRS)

Kasturi, Rangachar; Camps, Octavia; Coraor, Lee; Gandhi, Tarak; Hartman, Kerry; Yang, Mau-Tsuen

2000-01-01

The research reported here is a part of NASA's Synthetic Vision System (SVS) project for the development of a High Speed Civil Transport Aircraft (HSCT). One of the components of the SVS is a module for detection of potential obstacles in the aircraft's flight path by analyzing the images captured by an on-board camera in real-time. Design of such a module includes the selection and characterization of robust, reliable, and fast techniques and their implementation for execution in real-time. This report describes the results of our research in realizing such a design.

Collision avoidance using neural networks

NASA Astrophysics Data System (ADS)

Sugathan, Shilpa; Sowmya Shree, B. V.; Warrier, Mithila R.; Vidhyapathi, C. M.

2017-11-01

Now a days, accidents on roads are caused due to the negligence of drivers and pedestrians or due to unexpected obstacles that come into the vehicle’s path. In this paper, a model (robot) is developed to assist drivers for a smooth travel without accidents. It reacts to the real time obstacles on the four critical sides of the vehicle and takes necessary action. The sensor used for detecting the obstacle was an IR proximity sensor. A single layer perceptron neural network is used to train and test all possible combinations of sensors result by using Matlab (offline). A microcontroller (ARM Cortex-M3 LPC1768) is used to control the vehicle through the output data which is received from Matlab via serial communication. Hence, the vehicle becomes capable of reacting to any combination of real time obstacles.

Holographic particle detection

NASA Technical Reports Server (NTRS)

Bowen, Theodore

1988-01-01

The feasibility was studied of developing a novel particle track detector based on the detection of 1p-1s emission radiation from electron bubbles in liquid helium. The principles, design, construction, and initial testing of the detection system have been described in previous reports. The main obstacle encountered was the construction of the liquid-helium tight infrared windows. Despite numerous efforts in testing and redesigning the windows, the problem of window leakage at low temperature persisted. Due to limited time and resources, attention was switched to investigating the possibility of using room-temperature liquid as the detection medium. A possible mechanism was the detection of de-excitation radiation emitted from localized electrons in common liquids where electrons exhibit low mobilities, as suggested in the previous report. The purity of the liquid is critical in this method as the dissolved impurities (such as oxygen), even in trace amounts, will act as scavengers of electrons. Another mechanism is discussed whereby the formation of the superoxide ions by electron scavenging behavior of dissolved oxygen is exploited to detect the track of ionizing particles. An experiment to measure the ionization current produced in a liquid by a pulsed X-ray beam in order to study propertiies of the ions is also reported.

Two-dimensional supersonic nonlinear Schrödinger flow past an extended obstacle

NASA Astrophysics Data System (ADS)

El, G. A.; Kamchatnov, A. M.; Khodorovskii, V. V.; Annibale, E. S.; Gammal, A.

2009-10-01

Supersonic flow of a superfluid past a slender impenetrable macroscopic obstacle is studied in the framework of the two-dimensional (2D) defocusing nonlinear Schrödinger (NLS) equation. This problem is of fundamental importance as a dispersive analog of the corresponding classical gas-dynamics problem. Assuming the oncoming flow speed is sufficiently high, we asymptotically reduce the original boundary-value problem for a steady flow past a slender body to the one-dimensional dispersive piston problem described by the nonstationary NLS equation, in which the role of time is played by the stretched x coordinate and the piston motion curve is defined by the spatial body profile. Two steady oblique spatial dispersive shock waves (DSWs) spreading from the pointed ends of the body are generated in both half planes. These are described analytically by constructing appropriate exact solutions of the Whitham modulation equations for the front DSW and by using a generalized Bohr-Sommerfeld quantization rule for the oblique dark soliton fan in the rear DSW. We propose an extension of the traditional modulation description of DSWs to include the linear “ship-wave” pattern forming outside the nonlinear modulation region of the front DSW. Our analytic results are supported by direct 2D unsteady numerical simulations and are relevant to recent experiments on Bose-Einstein condensates freely expanding past obstacles.

Ontology-based knowledge representation for resolution of semantic heterogeneity in GIS

NASA Astrophysics Data System (ADS)

Liu, Ying; Xiao, Han; Wang, Limin; Han, Jialing

2017-07-01

Lack of semantic interoperability in geographical information systems has been identified as the main obstacle for data sharing and database integration. The new method should be found to overcome the problems of semantic heterogeneity. Ontologies are considered to be one approach to support geographic information sharing. This paper presents an ontology-driven integration approach to help in detecting and possibly resolving semantic conflicts. Its originality is that each data source participating in the integration process contains an ontology that defines the meaning of its own data. This approach ensures the automation of the integration through regulation of semantic integration algorithm. Finally, land classification in field GIS is described as the example.

Visual environment recognition for robot path planning using template matched filters

NASA Astrophysics Data System (ADS)

Orozco-Rosas, Ulises; Picos, Kenia; Díaz-Ramírez, Víctor H.; Montiel, Oscar; Sepúlveda, Roberto

2017-08-01

A visual approach in environment recognition for robot navigation is proposed. This work includes a template matching filtering technique to detect obstacles and feasible paths using a single camera to sense a cluttered environment. In this problem statement, a robot can move from the start to the goal by choosing a single path between multiple possible ways. In order to generate an efficient and safe path for mobile robot navigation, the proposal employs a pseudo-bacterial potential field algorithm to derive optimal potential field functions using evolutionary computation. Simulation results are evaluated in synthetic and real scenes in terms of accuracy of environment recognition and efficiency of path planning computation.

Motion planning with complete knowledge using a colored SOM.

PubMed

Vleugels, J; Kok, J N; Overmars, M

1997-01-01

The motion planning problem requires that a collision-free path be determined for a robot moving amidst a fixed set of obstacles. Most neural network approaches to this problem are for the situation in which only local knowledge about the configuration space is available. The main goal of the paper is to show that neural networks are also suitable tools in situations with complete knowledge of the configuration space. In this paper we present an approach that combines a neural network and deterministic techniques. We define a colored version of Kohonen's self-organizing map that consists of two different classes of nodes. The network is presented with random configurations of the robot and, from this information, it constructs a road map of possible motions in the work space. The map is a growing network, and different nodes are used to approximate boundaries of obstacles and the Voronoi diagram of the obstacles, respectively. In a second phase, the positions of the two kinds of nodes are combined to obtain the road map. In this way a number of typical problems with small obstacles and passages are avoided, and the required number of nodes for a given accuracy is within reasonable limits. This road map is searched to find a motion connecting the given source and goal configurations of the robot. The algorithm is simple and general; the only specific computation that is required is a check for intersection of two polygons. We implemented the algorithm for planar robots allowing both translation and rotation and experiments show that compared to conventional techniques it performs well, even for difficult motion planning scenes.

Transferring x-ray based automated threat detection between scanners with different energies and resolution

NASA Astrophysics Data System (ADS)

Caldwell, M.; Ransley, M.; Rogers, T. W.; Griffin, L. D.

2017-10-01

A significant obstacle to developing high performance Deep Learning algorithms for Automated Threat Detection (ATD) in security X-ray imagery, is the difficulty of obtaining large training datasets. In our previous work, we circumvented this problem for ATD in cargo containers, using Threat Image Projection and data augmentation. In this work, we investigate whether data scarcity for other modalities, such as parcels and baggage, can be ameliorated by transforming data from one domain so that it approximates the appearance of another. We present an ontology of ATD datasets to assess where transfer learning may be applied. We define frameworks for transfer at the training and testing stages, and compare the results for both methods against ATD where a common data source is used for training and testing. Our results show very poor transfer, which we attribute to the difficulty of accurately matching the blur and contrast characteristics of different scanners.

Flexible Wing Base Micro Aerial Vehicles: Vision-Guided Flight Stability and Autonomy for Micro Air Vehicles

NASA Technical Reports Server (NTRS)

Ettinger, Scott M.; Nechyba, Michael C.; Ifju, Peter G.; Wazak, Martin

2002-01-01

Substantial progress has been made recently towards design building and test-flying remotely piloted Micro Air Vehicle's (MAVs). We seek to complement this progress in overcoming the aerodynamic obstacles to.flight at very small scales with a vision stability and autonomy system. The developed system based on a robust horizon detection algorithm which we discuss in greater detail in a companion paper. In this paper, we first motivate the use of computer vision for MAV autonomy arguing that given current sensor technology, vision may he the only practical approach to the problem. We then briefly review our statistical vision-based horizon detection algorithm, which has been demonstrated at 30Hz with over 99.9% correct horizon identification. Next we develop robust schemes for the detection of extreme MAV attitudes, where no horizon is visible, and for the detection of horizon estimation errors, due to external factors such as video transmission noise. Finally, we discuss our feed-back controller for self-stabilized flight, and report results on vision autonomous flights of duration exceeding ten minutes.

An assessment of auditory-guided locomotion in an obstacle circumvention task.

PubMed

Kolarik, Andrew J; Scarfe, Amy C; Moore, Brian C J; Pardhan, Shahina

2016-06-01

This study investigated how effectively audition can be used to guide navigation around an obstacle. Ten blindfolded normally sighted participants navigated around a 0.6 × 2 m obstacle while producing self-generated mouth click sounds. Objective movement performance was measured using a Vicon motion capture system. Performance with full vision without generating sound was used as a baseline for comparison. The obstacle's location was varied randomly from trial to trial: it was either straight ahead or 25 cm to the left or right relative to the participant. Although audition provided sufficient information to detect the obstacle and guide participants around it without collision in the majority of trials, buffer space (clearance between the shoulder and obstacle), overall movement times, and number of velocity corrections were significantly (p < 0.05) greater with auditory guidance than visual guidance. Collisions sometime occurred under auditory guidance, suggesting that audition did not always provide an accurate estimate of the space between the participant and obstacle. Unlike visual guidance, participants did not always walk around the side that afforded the most space during auditory guidance. Mean buffer space was 1.8 times higher under auditory than under visual guidance. Results suggest that sound can be used to generate buffer space when vision is unavailable, allowing navigation around an obstacle without collision in the majority of trials.

Design and Development of a Mobile Sensor Based the Blind Assistance Wayfinding System

NASA Astrophysics Data System (ADS)

Barati, F.; Delavar, M. R.

2015-12-01

The blind and visually impaired people are facing a number of challenges in their daily life. One of the major challenges is finding their way both indoor and outdoor. For this reason, routing and navigation independently, especially in urban areas are important for the blind. Most of the blind undertake route finding and navigation with the help of a guide. In addition, other tools such as a cane, guide dog or electronic aids are used by the blind. However, in some cases these aids are not efficient enough in a wayfinding around obstacles and dangerous areas for the blind. As a result, the need to develop effective methods as decision support using a non-visual media is leading to improve quality of life for the blind through their increased mobility and independence. In this study, we designed and implemented an outdoor mobile sensor-based wayfinding system for the blind. The objectives of this study are to guide the blind for the obstacle recognition and the design and implementation of a wayfinding and navigation mobile sensor system for them. In this study an ultrasonic sensor is used to detect obstacles and GPS is employed for positioning and navigation in the wayfinding. This type of ultrasonic sensor measures the interval between sending waves and receiving the echo signals with respect to the speed of sound in the environment to estimate the distance to the obstacles. In this study the coordinates and characteristics of all the obstacles in the study area are already stored in a GIS database. All of these obstacles were labeled on the map. The ultrasonic sensor designed and constructed in this study has the ability to detect the obstacles in a distance of 2cm to 400cm. The implementation and the results obtained from the interview of a number of blind persons who employed the sensor verified that the designed mobile sensor system for wayfinding was very satisfactory.

Training Interdisciplinary "Wicked Problem" Solvers: Applying Lessons from HERO in Community-Based Research Experiences for Undergraduates

ERIC Educational Resources Information Center

Cantor, Alida; DeLauer, Verna; Martin, Deborah; Rogan, John

2015-01-01

Management of "wicked problems", messy real-world problems that defy resolution, requires thinkers who can transcend disciplinary boundaries, work collaboratively, and handle complexity and obstacles. This paper explores how educators can train undergraduates in these skills through applied community-based research, using the example of…

Knowledge/geometry-based Mobile Autonomous Robot Simulator (KMARS)

NASA Technical Reports Server (NTRS)

Cheng, Linfu; Mckendrick, John D.; Liu, Jeffrey

1990-01-01

Ongoing applied research is focused on developing guidance system for robot vehicles. Problems facing the basic research needed to support this development (e.g., scene understanding, real-time vision processing, etc.) are major impediments to progress. Due to the complexity and the unpredictable nature of a vehicle's area of operation, more advanced vehicle control systems must be able to learn about obstacles within the range of its sensor(s). A better understanding of the basic exploration process is needed to provide critical support to developers of both sensor systems and intelligent control systems which can be used in a wide spectrum of autonomous vehicles. Elcee Computek, Inc. has been working under contract to the Flight Dynamics Laboratory, Wright Research and Development Center, Wright-Patterson AFB, Ohio to develop a Knowledge/Geometry-based Mobile Autonomous Robot Simulator (KMARS). KMARS has two parts: a geometry base and a knowledge base. The knowledge base part of the system employs the expert-system shell CLIPS ('C' Language Integrated Production System) and necessary rules that control both the vehicle's use of an obstacle detecting sensor and the overall exploration process. The initial phase project has focused on the simulation of a point robot vehicle operating in a 2D environment.

Symbology requirements in head-up and head-down displays for helicopters in NOE flight

NASA Astrophysics Data System (ADS)

Haidn, Hermann; Odendahl, Goetz

1993-12-01

In modern warfare scenarios military helicopters have to be able to operate in NoE envelopes under all meteorological conditions. Under daytime good weather conditions this poses no problem for well-trained aircrews. In nighttime or bad weather conditions however the use of electronic sensors like IIT or TI is necessary. The aircrew use these devices for obstacle detection and avoidance and flight attitude perception. Flight below tree top level is only feasible when both of these tasks can be accomplished safely throughout the whole flight. For this reason the pilots must fly visual at all times. Relying on instruments for flight attitude control when flying between the trees would surely result in the striking of obstacles. These facts and the necessity for the aircrew to view greater azimuth angles than fixed wing pilots imply differing equipment and symbology packages for the two aircraft species. As a matter of fact only helmet mounted displays are really useful for helicopter flight control symbology. The following are results of experience from a number of trials with symbology in helicopters in low level flight down to 10 feet at night with IITs.

Structure and Possible Functions of Constant-Frequency Calls in Ariopsis seemanni (Osteichthyes, Ariidae)

PubMed Central

Schmidtke, Daniel; Schulz, Jochen; Hartung, Jörg; Esser, Karl-Heinz

2013-01-01

In the 1970s, Tavolga conducted a series of experiments in which he found behavioral evidence that the vocalizations of the catfish species Ariopsis felis may play a role in a coarse form of echolocation. Based on his findings, he postulated a similar function for the calls of closely related catfish species. Here, we describe the physical characteristics of the predominant call-type of Ariopsis seemanni. In two behavioral experiments, we further explore whether A. seemanni uses these calls for acoustic obstacle detection by testing the hypothesis that the call-emission rate of individual fish should increase when subjects are confronted with novel objects, as it is known from other vertebrate species that use pulse-type signals to actively probe the environment. Audio-video monitoring of the fish under different obstacle conditions did not reveal a systematic increase in the number of emitted calls in the presence of novel objects or in dependence on the proximity between individual fish and different objects. These negative findings in combination with our current understanding of directional hearing in fishes (which is a prerequisite for acoustic obstacle detection) make it highly unlikely that A. seemanni uses its calls for acoustic obstacle detection. We argue that the calls are more likely to play a role in intra- or interspecific communication (e.g. in school formation or predator deterrence) and present results from a preliminary Y-maze experiment that are indicative for a positive phonotaxis of A. seemanni towards the calls of conspecifics. PMID:23741408

An Information-Centric Approach to Autonomous Trajectory Planning Utilizing Optimal Control Techniques

DTIC Science & Technology

2009-09-01

to promote one way as the best, but to show there are several ways to define the problem. 107 Figure 71. Final Orientation/Obstacle Scenario...a comparison of the running cost vs. distance from an obstacle for varying values of p. Simulations have shown that for 4p  , the running cost...sliding door example. This scenario shows a major weakness when conducting trajectory planning using snapshots in a dynamic environment

High Order Accurate Algorithms for Shocks, Rapidly Changing Solutions and Multiscale Problems

DTIC Science & Technology

2014-11-13

for front propagation with obstacles, and homotopy method for steady states. Applications include high order simulations for 3D gaseous detonations ...obstacles, and homotopy method for steady states. Applications include high order simulations for 3D gaseous detonations , sound generation study via... detonation waves, Combustion and Flame, (02 2013): 0. doi: 10.1016/j.combustflame.2012.10.002 Yang Yang, Ishani Roy, Chi-Wang Shu, Li-Zhi Fang. THE

High-performance combination method of electric network frequency and phase for audio forgery detection in battery-powered devices.

PubMed

Savari, Maryam; Abdul Wahab, Ainuddin Wahid; Anuar, Nor Badrul

2016-09-01

Audio forgery is any act of tampering, illegal copy and fake quality in the audio in a criminal way. In the last decade, there has been increasing attention to the audio forgery detection due to a significant increase in the number of forge in different type of audio. There are a number of methods for forgery detection, which electric network frequency (ENF) is one of the powerful methods in this area for forgery detection in terms of accuracy. In spite of suitable accuracy of ENF in a majority of plug-in powered devices, the weak accuracy of ENF in audio forgery detection for battery-powered devices, especially in laptop and mobile phone, can be consider as one of the main obstacles of the ENF. To solve the ENF problem in terms of accuracy in battery-powered devices, a combination method of ENF and phase feature is proposed. From experiment conducted, ENF alone give 50% and 60% accuracy for forgery detection in mobile phone and laptop respectively, while the proposed method shows 88% and 92% accuracy respectively, for forgery detection in battery-powered devices. The results lead to higher accuracy for forgery detection with the combination of ENF and phase feature. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Assessing the ground vibrations produced by a heavy vehicle traversing a traffic obstacle.

PubMed

Ducarne, Loïc; Ainalis, Daniel; Kouroussis, Georges

2018-01-15

Despite advancements in alternative transport networks, road transport remains the dominant mode in many modern and developing countries. The ground-borne motions produced by the passage of a heavy vehicle over a geometric obstacle (e.g. speed hump, train tracks) pose a fundamental problem in transport annoyance in urban areas. In order to predict the ground vibrations generated by the passage of a heavy vehicle over a geometric obstacle, a two-step numerical model is developed. The first step involves simulating the dynamic loads generated by the heavy vehicle using a multibody approach, which includes the tyre-obstacle-ground interaction. The second step involves the simulation of the ground wave propagation using a three dimensional finite element model. The simulation is able to be decoupled due to the large difference in stiffness between the vehicle's tyres and the road. First, the two-step model is validated using an experimental case study available in the literature. A sensitivity analysis is then presented, examining the influence of various factors on the generated ground vibrations. Factors investigated include obstacle shape, obstacle dimensions, vehicle speed, and tyre stiffness. The developed model can be used as a tool in the early planning stages to predict the ground vibrations generated by the passage of a heavy vehicle over an obstacle in urban areas. Copyright © 2017 Elsevier B.V. All rights reserved.

Bi-stability in cooperative transport by ants in the presence of obstacles

PubMed Central

Pinkoviezky, Itai; Feinerman, Ofer

2018-01-01

To cooperatively carry large food items to the nest, individual ants conform their efforts and coordinate their motion. Throughout this expedition, collective motion is driven both by internal interactions between the carrying ants and a response to newly arrived informed ants that orient the cargo towards the nest. During the transport process, the carrying group must overcome obstacles that block their path to the nest. Here, we investigate the dynamics of cooperative transport, when the motion of the ants is frustrated by a linear obstacle that obstructs the motion of the cargo. The obstacle contains a narrow opening that serves as the only available passage to the nest, and through which single ants can pass but not with the cargo. We provide an analytical model for the ant-cargo system in the constrained environment that predicts a bi-stable dynamic behavior between an oscillatory mode of motion along the obstacle and a convergent mode of motion near the opening. Using both experiments and simulations, we show how for small cargo sizes, the system exhibits spontaneous transitions between these two modes of motion due to fluctuations in the applied force on the cargo. The bi-stability provides two possible problem solving strategies for overcoming the obstacle, either by attempting to pass through the opening, or take large excursions to circumvent the obstacle. PMID:29746457

Bi-stability in cooperative transport by ants in the presence of obstacles.

PubMed

Ron, Jonathan E; Pinkoviezky, Itai; Fonio, Ehud; Feinerman, Ofer; Gov, Nir S

2018-05-01

To cooperatively carry large food items to the nest, individual ants conform their efforts and coordinate their motion. Throughout this expedition, collective motion is driven both by internal interactions between the carrying ants and a response to newly arrived informed ants that orient the cargo towards the nest. During the transport process, the carrying group must overcome obstacles that block their path to the nest. Here, we investigate the dynamics of cooperative transport, when the motion of the ants is frustrated by a linear obstacle that obstructs the motion of the cargo. The obstacle contains a narrow opening that serves as the only available passage to the nest, and through which single ants can pass but not with the cargo. We provide an analytical model for the ant-cargo system in the constrained environment that predicts a bi-stable dynamic behavior between an oscillatory mode of motion along the obstacle and a convergent mode of motion near the opening. Using both experiments and simulations, we show how for small cargo sizes, the system exhibits spontaneous transitions between these two modes of motion due to fluctuations in the applied force on the cargo. The bi-stability provides two possible problem solving strategies for overcoming the obstacle, either by attempting to pass through the opening, or take large excursions to circumvent the obstacle.

Interaction dynamics of multiple autonomous mobile robots in bounded spatial domains

NASA Technical Reports Server (NTRS)

Wang, P. K. C.

1989-01-01

A general navigation strategy for multiple autonomous robots in a bounded domain is developed analytically. Each robot is modeled as a spherical particle (i.e., an effective spatial domain about the center of mass); its interactions with other robots or with obstacles and domain boundaries are described in terms of the classical many-body problem; and a collision-avoidance strategy is derived and combined with homing, robot-robot, and robot-obstacle collision-avoidance strategies. Results from homing simulations involving (1) a single robot in a circular domain, (2) two robots in a circular domain, and (3) one robot in a domain with an obstacle are presented in graphs and briefly characterized.

Autonomous navigation system and method

DOEpatents

Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID

2009-09-08

A robot platform includes perceptors, locomotors, and a system controller, which executes instructions for autonomously navigating a robot. The instructions repeat, on each iteration through an event timing loop, the acts of defining an event horizon based on the robot's current velocity, detecting a range to obstacles around the robot, testing for an event horizon intrusion by determining if any range to the obstacles is within the event horizon, and adjusting rotational and translational velocity of the robot accordingly. If the event horizon intrusion occurs, rotational velocity is modified by a proportion of the current rotational velocity reduced by a proportion of the range to the nearest obstacle and translational velocity is modified by a proportion of the range to the nearest obstacle. If no event horizon intrusion occurs, translational velocity is set as a ratio of a speed factor relative to a maximum speed.

Foliage discrimination using a rotating ladar

NASA Technical Reports Server (NTRS)

Castano, A.; Matthies, L.

2003-01-01

We present a real time algorithm that detects foliage using range from a rotating laser. Objects not classified as foliage are conservatively labeled as non-driving obstacles. In contrast to related work that uses range statistics to classify objects, we exploit the expected localities and continuities of an obstacle, in both space and time. Also, instead of attempting to find a single accurate discriminating factor for every ladar return, we hypothesize the class of some few returns and then spread the confidence (and classification) to other returns using the locality constraints. The Urbie robot is presently using this algorithm to descriminate drivable grass from obstacles during outdoor autonomous navigation tasks.

Micro air vehicle autonomous obstacle avoidance from stereo-vision

NASA Astrophysics Data System (ADS)

Brockers, Roland; Kuwata, Yoshiaki; Weiss, Stephan; Matthies, Lawrence

2014-06-01

We introduce a new approach for on-board autonomous obstacle avoidance for micro air vehicles flying outdoors in close proximity to structure. Our approach uses inverse-range, polar-perspective stereo-disparity maps for obstacle detection and representation, and deploys a closed-loop RRT planner that considers flight dynamics for trajectory generation. While motion planning is executed in 3D space, we reduce collision checking to a fast z-buffer-like operation in disparity space, which allows for significant speed-up compared to full 3d methods. Evaluations in simulation illustrate the robustness of our approach, whereas real world flights under tree canopy demonstrate the potential of the approach.

Biomechanical risk factors for tripping during obstacle--Crossing with the trailing limb in patients with type II diabetes mellitus.

PubMed

Hsu, Wei-Chun; Liu, Ming-Wei; Lu, Tung-Wu

2016-03-01

People with type II diabetes mellitus (DM) are at a high risk of falling especially during more challenging locomotor tasks such as obstacle-crossing. The current study aimed to identify the risk factors for tripping in these patients during trailing-limb obstacle-crossing. Fourteen patients with type II DM with or without mild peripheral neuropathy (PN) and 14 healthy controls walked and crossed obstacles of three different heights while their motion data were measured using a motion capture system and two forceplates. The DM group was found to cross obstacles with significantly reduced trailing toe clearance (p<0.05), increasing the probability of the foot hitting the obstacle, and thus the risk of tripping. This altered end-point control was associated with significantly reduced knee flexion and hip adduction of the trailing swing limb (p<0.05), as well as significantly increased ankle plantarflexor moments in the leading stance limb (p<0.05). Therefore, reduced knee flexion and hip adduction of the swing limb are identified as risk factors for tripping during obstacle-crossing. Increased mechanical demands on the ankle plantarflexors suggest that weakness of these muscles may further reduce the already compromised performance of obstacle-crossing in these patients. The current results showed that obstacle-crossing can be used to detect gait deviations and to identify the associated risk of tripping in patients with type II DM without or at an early stage of PN. Copyright © 2016 Elsevier B.V. All rights reserved.

State estimation for autonomous flight in cluttered environments

NASA Astrophysics Data System (ADS)

Langelaan, Jacob Willem

Safe, autonomous operation in complex, cluttered environments is a critical challenge facing autonomous mobile systems. The research described in this dissertation was motivated by a particularly difficult example of autonomous mobility: flight of a small Unmanned Aerial Vehicle (UAV) through a forest. In cluttered environments (such as forests or natural and urban canyons) signals from navigation beacons such as GPS may frequently be occluded. Direct measurements of vehicle position are therefore unavailable, and information required for flight control, obstacle avoidance, and navigation must be obtained using only on-board sensors. However, payload limitations of small UAVs restrict both the mass and physical dimensions of sensors that can be carried. This dissertation describes the development and proof-of-concept demonstration of a navigation system that uses only a low-cost inertial measurement unit and a monocular camera. Micro electromechanical inertial measurements units are well suited to small UAV applications and provide measurements of acceleration and angular rate. However, they do not provide information about nearby obstacles (needed for collision avoidance) and their noise and bias characteristics lead to unbounded growth in computed position. A monocular camera can provide bearings to nearby obstacles and landmarks. These bearings can be used both to enable obstacle avoidance and to aid navigation. Presented here is a solution to the problem of estimating vehicle state (position, orientation and velocity) as well as positions of obstacles in the environment using only inertial measurements and bearings to obstacles. This is a highly nonlinear estimation problem, and standard estimation techniques such as the Extended Kalman Filter are prone to divergence in this application. In this dissertation a Sigma Point Kalman Filter is implemented, resulting in an estimator which is able to cope with the significant nonlinearities in the system equations and uncertainty in state estimates while remaining tractable for real-time operation. In addition, the issues of data association and landmark initialization are addressed. Estimator performance is examined through Monte Carlo simulations in both two and three dimensions for scenarios involving UAV flight in cluttered environments. Hardware tests and simulations demonstrate navigation through an obstacle-strewn environment by a small Unmanned Ground Vehicle.

A review of damage detection methods for wind turbine blades

NASA Astrophysics Data System (ADS)

Li, Dongsheng; Ho, Siu-Chun M.; Song, Gangbing; Ren, Liang; Li, Hongnan

2015-03-01

Wind energy is one of the most important renewable energy sources and many countries are predicted to increase wind energy portion of their whole national energy supply to about twenty percent in the next decade. One potential obstacle in the use of wind turbines to harvest wind energy is the maintenance of the wind turbine blades. The blades are a crucial and costly part of a wind turbine and over their service life can suffer from factors such as material degradation and fatigue, which can limit their effectiveness and safety. Thus, the ability to detect damage in wind turbine blades is of great significance for planning maintenance and continued operation of the wind turbine. This paper presents a review of recent research and development in the field of damage detection for wind turbine blades. Specifically, this paper reviews frequently employed sensors including fiber optic and piezoelectric sensors, and four promising damage detection methods, namely, transmittance function, wave propagation, impedance and vibration based methods. As a note towards the future development trend for wind turbine sensing systems, the necessity for wireless sensing and energy harvesting is briefly presented. Finally, existing problems and promising research efforts for online damage detection of turbine blades are discussed.

Obstacle detection by recognizing binary expansion patterns

NASA Technical Reports Server (NTRS)

Baram, Yoram; Barniv, Yair

1993-01-01

This paper describes a technique for obstacle detection, based on the expansion of the image-plane projection of a textured object, as its distance from the sensor decreases. Information is conveyed by vectors whose components represent first-order temporal and spatial derivatives of the image intensity, which are related to the time to collision through the local divergence. Such vectors may be characterized as patterns corresponding to 'safe' or 'dangerous' situations. We show that essential information is conveyed by single-bit vector components, representing the signs of the relevant derivatives. We use two recently developed, high capacity classifiers, employing neural learning techniques, to recognize the imminence of collision from such patterns.

Railway obstacle detection algorithm using neural network

NASA Astrophysics Data System (ADS)

Yu, Mingyang; Yang, Peng; Wei, Sen

2018-05-01

Aiming at the difficulty of detection of obstacle in outdoor railway scene, a data-oriented method based on neural network to obtain image objects is proposed. First, we mark objects of images(such as people, trains, animals) acquired on the Internet. and then use the residual learning units to build Fast R-CNN framework. Then, the neural network is trained to get the target image characteristics by using stochastic gradient descent algorithm. Finally, a well-trained model is used to identify an outdoor railway image. if it includes trains and other objects, it will issue an alert. Experiments show that the correct rate of warning reached 94.85%.

Evaluation of a Multicomponent, Behaviorally Oriented, Problem-Based "Summer School" Program for Adolescents with Diabetes.

ERIC Educational Resources Information Center

Schlundt, David G.; Flannery, Mary Ellen; Davis, Dianne L.; Kinzer, Charles K.; Pichert, James W.

1999-01-01

Examines a two-week summer program using problem-based learning and behavior therapy to help adolescents with insulin-dependent diabetes improve their ability to cope with obstacles to dietary management. Improvements were observed in self-efficacy, problem-solving skills, and self-reported coping strategies. No significant changes were observed…

Obstacle Crossing During Gait in Children With Cerebral Palsy: Cross-Sectional Study With Kinematic Analysis of Dynamic Balance and Trunk Control.

PubMed

Malone, Ailish; Kiernan, Damien; French, Helen; Saunders, Valerie; O'Brien, Timothy

2016-08-01

Balance problems are common in children who have cerebral palsy (CP) but are active and ambulant. Control of the whole-body center of mass is critical in maintaining dynamic stability during challenging mobility tasks, such as clearing an obstacle while walking. The objective of this study was to compare trunk and lower limb kinematics and center-of-mass control in children with CP and those in children with typical development during obstacle crossing. This was a cross-sectional study. Thirty-four children who were 5 to 17 years of age (17 with CP and 17 with typical development) and matched in age and height completed 2 gait trials involving crossing a 10-cm obstacle. Three-dimensional kinematic and kinetic data were captured with a general-purpose 3-dimensional motion tracking system and forceplates. Trunk data were captured with a validated model. All children cleared the obstacle with similar hip and knee kinematics, step length, and single-support duration. In children with CP, step width was increased by 4.81 cm, and center-of-mass velocity was significantly slower at lead limb toe-off (0.31 m/s) and during lead limb clearance (0.2 m/s). Children with CP showed altered trunk and pelvis movement, characterized by significantly greater pelvic obliquity, pelvic tilt, and trunk rotation throughout the task, increased lateral trunk lean during lead limb crossing (3.7°), and greater sagittal trunk movement as the trail limb crossed (5.1°). The study was not powered to analyze differences between children with diplegia and those with hemiplegia. Children with CP required greater adjustments at the trunk and pelvis to achieve successful obstacle crossing. The increase in trunk movement could have been compensatory for reduced stability distally or for a primary problem reflecting poor proximal control. The findings suggest that rehabilitation should focus on both proximal trunk control and distal stability to improve balance. © 2016 American Physical Therapy Association.

Optimal partial mass transportation and obstacle Monge-Kantorovich equation

NASA Astrophysics Data System (ADS)

Igbida, Noureddine; Nguyen, Van Thanh

2018-05-01

Optimal partial mass transport, which is a variant of the optimal transport problem, consists in transporting effectively a prescribed amount of mass from a source to a target. The problem was first studied by Caffarelli and McCann (2010) [6] and Figalli (2010) [12] with a particular attention to the quadratic cost. Our aim here is to study the optimal partial mass transport problem with Finsler distance costs including the Monge cost given by the Euclidian distance. Our approach is different and our results do not follow from previous works. Among our results, we introduce a PDE of Monge-Kantorovich type with a double obstacle to characterize active submeasures, Kantorovich potential and optimal flow for the optimal partial transport problem. This new PDE enables us to study the uniqueness and monotonicity results for the active submeasures. Another interesting issue of our approach is its convenience for numerical analysis and computations that we develop in a separate paper [14] (Igbida and Nguyen, 2018).

Applications of elliptic operator theory to the isotropic interior transmission eigenvalue problem

NASA Astrophysics Data System (ADS)

Lakshtanov, E.; Vainberg, B.

2013-10-01

The paper concerns the isotropic interior transmission eigenvalue (ITE) problem. This problem is not elliptic, but we show that, using the Dirichlet-to-Neumann map, it can be reduced to an elliptic one. This leads to the discreteness of the spectrum as well as to certain results on a possible location of the transmission eigenvalues. If the index of refraction \\sqrt{n(x)} is real, then we obtain a result on the existence of infinitely many positive ITEs and the Weyl-type lower bound on its counting function. All the results are obtained under the assumption that n(x) - 1 does not vanish at the boundary of the obstacle or it vanishes identically, but its normal derivative does not vanish at the boundary. We consider the classical transmission problem as well as the case when the inhomogeneous medium contains an obstacle. Some results on the discreteness and localization of the spectrum are obtained for complex valued n(x).

A wearable multipoint ultrasonic travel aids for visually impaired

NASA Astrophysics Data System (ADS)

Ercoli, Ilaria; Marchionni, Paolo; Scalise, Lorenzo

2013-09-01

In 2010, the World Health Organization estimates that there were about 285 million people in the world with disabling eyesight loss (246 millions are visually impaired (VI) and 39 millions are totally blind). For such users, hits during mobility tasks are the reason of major concerns and can reduce the quality of their life. The white cane is the primary device used by the majority of blind or VI users to explore and possibly avoid obstacles; it can monitor only the ground (< 1m) and it does not provide protection for the legs, the trunk and the head. In this paper, authors propose a novel stand-alone Electronic Travel Aid (ETA) device for obstacle detection based on multi- sensing (by 4 ultrasonic transducers) and a microcontroller. Portability, simplicity, reduced dimensions and cost are among the major pros of the reported system, which can detect and localize (angular position and distance from the user) obstacles eventually present in the volume in front of him and on the ground in front of him.

Indoor Navigation from Point Clouds: 3d Modelling and Obstacle Detection

NASA Astrophysics Data System (ADS)

Díaz-Vilariño, L.; Boguslawski, P.; Khoshelham, K.; Lorenzo, H.; Mahdjoubi, L.

2016-06-01

In the recent years, indoor modelling and navigation has become a research of interest because many stakeholders require navigation assistance in various application scenarios. The navigational assistance for blind or wheelchair people, building crisis management such as fire protection, augmented reality for gaming, tourism or training emergency assistance units are just some of the direct applications of indoor modelling and navigation. Navigational information is traditionally extracted from 2D drawings or layouts. Real state of indoors, including opening position and geometry for both windows and doors, and the presence of obstacles is commonly ignored. In this work, a real indoor-path planning methodology based on 3D point clouds is developed. The value and originality of the approach consist on considering point clouds not only for reconstructing semantically-rich 3D indoor models, but also for detecting potential obstacles in the route planning and using these for readapting the routes according to the real state of the indoor depictured by the laser scanner.

An Obstacle-Tolerant Path Planning Algorithm for Mobile-Anchor-Node-Assisted Localization

PubMed Central

Tsai, Rong-Guei

2018-01-01

The location information obtained using a sensor is a critical requirement in wireless sensor networks. Numerous localization schemes have been proposed, among which mobile-anchor-node-assisted localization (MANAL) can reduce costs and overcome environmental constraints. A mobile anchor node (MAN) provides its own location information to assist the localization of sensor nodes. Numerous path planning schemes have been proposed for MANAL, but most scenarios assume the absence of obstacles in the environment. However, in a realistic environment, sensor nodes cannot be located because the obstacles block the path traversed by the MAN, thereby rendering the sensor incapable of receiving sufficient three location information from the MAN. This study proposes the obstacle-tolerant path planning (OTPP) approach to solve the sensor location problem owing to obstacle blockage. OTPP can approximate the optimum beacon point number and path planning, thereby ensuring that all the unknown nodes can receive the three location information from the MAN and reduce the number of MAN broadcast packet times. Experimental results demonstrate that OTPP performs better than Z-curves because it reduces the total number of beacon points utilized and is thus more suitable in an obstacle-present environment. Compared to the Z-curve, OTPP can reduce localization error and improve localization coverage. PMID:29547582

Automatic detection and classification of obstacles with applications in autonomous mobile robots

NASA Astrophysics Data System (ADS)

Ponomaryov, Volodymyr I.; Rosas-Miranda, Dario I.

2016-04-01

Hardware implementation of an automatic detection and classification of objects that can represent an obstacle for an autonomous mobile robot using stereo vision algorithms is presented. We propose and evaluate a new method to detect and classify objects for a mobile robot in outdoor conditions. This method is divided in two parts, the first one is the object detection step based on the distance from the objects to the camera and a BLOB analysis. The second part is the classification step that is based on visuals primitives and a SVM classifier. The proposed method is performed in GPU in order to reduce the processing time values. This is performed with help of hardware based on multi-core processors and GPU platform, using a NVIDIA R GeForce R GT640 graphic card and Matlab over a PC with Windows 10.

Radiological clinical trials: Proposal of a problem-finding questionnaire to improve study success.

PubMed

Valdora, Francesca; Bignotti, Bianca; Calabrese, Massimo; Houssami, Nehmat; Tagliafico, Alberto

2016-12-26

To develop a survey to help define the main problems in radiological clinical trials. Since 2006, we have managed seven different radiological clinical trials recruiting patients in academic and non-academic centres. We developed a preliminary questionnaire using a four-round Delphi approach to identify problems occurring in radiological clinical trials run at our centre. We investigated the recruitment experience, involvement of all multi-disciplinary team members and main obstacles to completing the projects. A final round of Delphi processes elucidated solutions to the identified problems. Among 19/20 (95%) respondents, 10 (53%) were young physicians (under 35 years old), and the respondents included non-faculty members, fellows, residents, and undergraduate students. Ninety-four percent (18/19) of respondents showed interest in conducting clinical trials. On a scale of 1 to 10, the problems with higher/worse scores (8-9) were related to technical or communication problems. The most frequent problems across all studies were technical problems related to clinical trial equipment, insufficient willingness to participate, obstacles to understanding the design of electronic-case report form and extra work. The developed questionnaire identified the main recurring problems in radiological clinical trials as perceived by end-users and helped define possible solutions that are mostly related to having dedicated clinical trial research staff.

Visually guided gait modifications for stepping over an obstacle: a bio-inspired approach.

PubMed

Silva, Pedro; Matos, Vitor; Santos, Cristina P

2014-02-01

There is an increasing interest in conceiving robotic systems that are able to move and act in an unstructured and not predefined environment, for which autonomy and adaptability are crucial features. In nature, animals are autonomous biological systems, which often serve as bio-inspiration models, not only for their physical and mechanical properties, but also their control structures that enable adaptability and autonomy-for which learning is (at least) partially responsible. This work proposes a system which seeks to enable a quadruped robot to online learn to detect and to avoid stumbling on an obstacle in its path. The detection relies in a forward internal model that estimates the robot's perceptive information by exploring the locomotion repetitive nature. The system adapts the locomotion in order to place the robot optimally before attempting to step over the obstacle, avoiding any stumbling. Locomotion adaptation is achieved by changing control parameters of a central pattern generator (CPG)-based locomotion controller. The mechanism learns the necessary alterations to the stride length in order to adapt the locomotion by changing the required CPG parameter. Both learning tasks occur online and together define a sensorimotor map, which enables the robot to learn to step over the obstacle in its path. Simulation results show the feasibility of the proposed approach.

Obstacles and problems of ethical leadership from the perspective of nursing leaders: a qualitative content analysis

PubMed Central

Barkhordari-Sharifabad, Maasoumeh; Ashktorab, Tahereh; Atashzadeh-Shoorideh, Foroozan

2017-01-01

In the nursing profession, leadership plays a significant role in creating motivation and thus enabling nurses to provide high quality care. Ethics is an essential component of leadership qualifications and the ethical leader can help create an ethical atmosphere, offer ethical guidance, and ensure the occupational satisfaction of personnel through prioritizing moralities. However, some issues prevent the implementation of this type of leadership by nursing leaders. The aim of this study was to identify and describe some problems and obstacles in ethical leadership faced by nursing leaders, and to help them achieve more accurate information and broader perspective in this field. The present study was conducted using a qualitative approach and content analysis. A total of 14 nursing managers and educators were selected purposefully, and deep and semi-structured interviews were conducted with them. Content analysis was performed using an inductive approach. Three main categories were obtained after data analysis: ethical, cultural and managerial problems. “Ethical problems” pertain to doubt in ethical actions, ethical conflicts and ethical distress; “cultural problems” include organizational and social culture; and “managerial problems” are connected to organizational and staff-related issues. Nursing leaders put forth various aspects of the problems associated with ethical leadership in the clinical setting. This style of leadership could be promoted by developing suitable programs and providing clear-cut strategies for removing the current obstacles and correcting the organizational structure. This can lead to ethical improvement in nursing leaders and subsequently the nurses. PMID:28523116

[Depressed mothers: the impact of depression on early interactions. An analysis of Anglo-Saxon studies].

PubMed

Guedeney, N

1993-10-01

Maternal depression remains a public health problem as indicated by many studies focusing on depression in mothers of young children. Although the high prevalence of depression in mothers of infants and young children is now a recognized fact, the detection and management of maternal depression in everyday practice still raises significant problems. This initial review centers on studies providing diagnostic guidelines. The problem of maternal depression and of its impact on the offspring is relevant to the issue of how qualities, abilities, and vulnerabilities are transmitted from one generation to the next. Psychoanalysts, infant psychiatrists, and developmental psychologists show great interest in this field. The current review was restricted to recent Anglo-Saxon studies on depression-related changes in early maternal behavior. The most striking findings are as follows: although depression affects maternal behavior overall, there is considerable variation across mothers; timing alterations (in terms of micro and macro sequences) in mother-child interactions occur in every case and are among the obstacles to harmony and synchronization; subtle alterations in the mother's response to her baby's signals preclude flexibility and anticipation.

Novel approaches to helicopter obstacle warning

NASA Astrophysics Data System (ADS)

Seidel, Christian; Samuelis, Christian; Wegner, Matthias; Münsterer, Thomas; Rumpf, Thomas; Schwartz, Ingo

2006-05-01

EADS Germany is the world market leader in commercial Helicopter Laser Radar (HELLAS) Obstacle Warning Systems. The HELLAS-Warning System has been introduced into the market in 2000, is in service at German Border Control (Bundespolizei) and Royal Thai Airforce and is successfully evaluated by the Foreign Comparative Test Program (FCT) of the USSOCOM. Currently the successor system HELLAS-Awareness is in development. It will have extended sensor performance, enhanced realtime data processing capabilities and advanced HMI features. We will give an outline of the new sensor unit concerning detection technology and helicopter integration aspects. The system provides a widespread field of view with additional dynamic line of sight steering and a large detection range in combination with a high frame rate of 3Hz. The workflow of the data processing will be presented with focus on novel filter techniques and obstacle classification methods. As commonly known the former are indispensable due to unavoidable statistical measuring errors and solarisation. The amount of information in the filtered raw data is further reduced by ground segmentation. The remaining raised objects are extracted and classified in several stages into different obstacle classes. We will show the prioritization function which orders the obstacles concerning to their threat potential to the helicopter taking into account the actual flight dynamics. The priority of an object determines the display and provision of warnings to the pilot. Possible HMI representation includes video or FLIR overlay on multifunction displays, audio warnings and visualization of information on helmet mounted displays and digital maps. Different concepts will be presented.

Computer Graphics and Creativity/Problem Solving Skills with Deaf and Severely Language Disordered Students: Parts I, II, and III.

ERIC Educational Resources Information Center

Rose, Susan; And Others

Three papers focus on applications of computer graphics with deaf and severely language impaired children. The first describes a drawing tablet software that allowed students to use visual and manipulative characteristics to enhance problem solving and creativity skills. Students were thus able to solve problems without the obstacles of language.…

Object classification for obstacle avoidance

NASA Astrophysics Data System (ADS)

Regensburger, Uwe; Graefe, Volker

1991-03-01

Object recognition is necessary for any mobile robot operating autonomously in the real world. This paper discusses an object classifier based on a 2-D object model. Obstacle candidates are tracked and analyzed false alarms generated by the object detector are recognized and rejected. The methods have been implemented on a multi-processor system and tested in real-world experiments. They work reliably under favorable conditions but sometimes problems occur e. g. when objects contain many features (edges) or move in front of structured background.

The blind men meet the elephant at the dam: Alternative spatial and taxonomic components reveal different insights about how low-head dams impact fish biodiversity

USGS Publications Warehouse

Fencl, Jane S.; Mather, Martha E.; Smith, Joseph M.; Hitchman, Sean M.

2017-01-01

Dams are ubiquitous environmental impacts that threaten aquatic ecosystems. The ability to compare across research studies is essential to conserve the native biodiversity that is impacted by the millions of low‐head dams that currently fragment streams and rivers. Here, we identify a previously unaddressed obstacle that impedes this generalization. Specifically, divergent spatial and taxonomic approaches that result from different conceptualizations of the dam‐biodiversity problem can produce conflicting science‐based conclusions about the same dam impact. In this research, using the same dammed and undammed sites, we evaluated the scientific generality of different conceptualizations of the dam‐biodiversity problem. We compared two different but commonly used spatial approaches—(1) above dam–below dam vs. (2) undammed–dammed comparisons—and 11 different, commonly used taxonomic approaches (three assemblage summaries, eight guilds). Sites above the dam structure had less diverse fish assemblages than sites below dams, whereas sites below the dam structure were similar to undammed sites. Thus, spatial approach 1 detected a large dam effect and spatial approach 2 detected a small dam effect. Similarly, some taxonomic responses (species richness, diversity, abundance, and number of guilds) detected large dam effects; other responses detected small (riffle specialist guild) or no dam effects (pool generalists). In summary, our results showed that how the problem was framed altered scientific conclusions and created different dam realities. The metaphor of how individual blind men disagree about the structure of an elephant, based on examinations of different body parts, reinforces the need for a coordinated, holistic perspective on dam research. Although no single approach is adequate for all problems, identifying the form, consequences of, and relationships among different research conceptualizations will set the stage for future syntheses of dam‐biodiversity research to advance science‐based conservation.

Bim-Based Indoor Path Planning Considering Obstacles

NASA Astrophysics Data System (ADS)

Xu, M.; Wei, S.; Zlatanova, S.; Zhang, R.

2017-09-01

At present, 87 % of people's activities are in indoor environment; indoor navigation has become a research issue. As the building structures for people's daily life are more and more complex, many obstacles influence humans' moving. Therefore it is essential to provide an accurate and efficient indoor path planning. Nowadays there are many challenges and problems in indoor navigation. Most existing path planning approaches are based on 2D plans, pay more attention to the geometric configuration of indoor space, often ignore rich semantic information of building components, and mostly consider simple indoor layout without taking into account the furniture. Addressing the above shortcomings, this paper uses BIM (IFC) as the input data and concentrates on indoor navigation considering obstacles in the multi-floor buildings. After geometric and semantic information are extracted, 2D and 3D space subdivision methods are adopted to build the indoor navigation network and to realize a path planning that avoids obstacles. The 3D space subdivision is based on triangular prism. The two approaches are verified by the experiments.

On computing the global time-optimal motions of robotic manipulators in the presence of obstacles

NASA Technical Reports Server (NTRS)

Shiller, Zvi; Dubowsky, Steven

1991-01-01

A method for computing the time-optimal motions of robotic manipulators is presented that considers the nonlinear manipulator dynamics, actuator constraints, joint limits, and obstacles. The optimization problem is reduced to a search for the time-optimal path in the n-dimensional position space. A small set of near-optimal paths is first efficiently selected from a grid, using a branch and bound search and a series of lower bound estimates on the traveling time along a given path. These paths are further optimized with a local path optimization to yield the global optimal solution. Obstacles are considered by eliminating the collision points from the tessellated space and by adding a penalty function to the motion time in the local optimization. The computational efficiency of the method stems from the reduced dimensionality of the searched spaced and from combining the grid search with a local optimization. The method is demonstrated in several examples for two- and six-degree-of-freedom manipulators with obstacles.

UAV formation control design with obstacle avoidance in dynamic three-dimensional environment.

PubMed

Chang, Kai; Xia, Yuanqing; Huang, Kaoli

2016-01-01

This paper considers the artificial potential field method combined with rotational vectors for a general problem of multi-unmanned aerial vehicle (UAV) systems tracking a moving target in dynamic three-dimensional environment. An attractive potential field is generated between the leader and the target. It drives the leader to track the target based on the relative position of them. The other UAVs in the formation are controlled to follow the leader by the attractive control force. The repulsive force affects among the UAVs to avoid collisions and distribute the UAVs evenly on the spherical surface whose center is the leader-UAV. Specific orders or positions of the UAVs are not required. The trajectories of avoidance obstacle can be obtained through two kinds of potential field with rotation vectors. Every UAV can choose the optimal trajectory to avoid the obstacle and reconfigure the formation after passing the obstacle. Simulations study on UAV are presented to demonstrate the effectiveness of proposed method.

Vision based techniques for rotorcraft low altitude flight

NASA Technical Reports Server (NTRS)

Sridhar, Banavar; Suorsa, Ray; Smith, Philip

1991-01-01

An overview of research in obstacle detection at NASA Ames Research Center is presented. The research applies techniques from computer vision to automation of rotorcraft navigation. The development of a methodology for detecting the range to obstacles based on the maximum utilization of passive sensors is emphasized. The development of a flight and image data base for verification of vision-based algorithms, and a passive ranging methodology tailored to the needs of helicopter flight are discussed. Preliminary results indicate that it is possible to obtain adequate range estimates except at regions close to the FOE. Closer to the FOE, the error in range increases since the magnitude of the disparity gets smaller, resulting in a low SNR.

Obstacle Avoidance and Target Acquisition for Robot Navigation Using a Mixed Signal Analog/Digital Neuromorphic Processing System

PubMed Central

Milde, Moritz B.; Blum, Hermann; Dietmüller, Alexander; Sumislawska, Dora; Conradt, Jörg; Indiveri, Giacomo; Sandamirskaya, Yulia

2017-01-01

Neuromorphic hardware emulates dynamics of biological neural networks in electronic circuits offering an alternative to the von Neumann computing architecture that is low-power, inherently parallel, and event-driven. This hardware allows to implement neural-network based robotic controllers in an energy-efficient way with low latency, but requires solving the problem of device variability, characteristic for analog electronic circuits. In this work, we interfaced a mixed-signal analog-digital neuromorphic processor ROLLS to a neuromorphic dynamic vision sensor (DVS) mounted on a robotic vehicle and developed an autonomous neuromorphic agent that is able to perform neurally inspired obstacle-avoidance and target acquisition. We developed a neural network architecture that can cope with device variability and verified its robustness in different environmental situations, e.g., moving obstacles, moving target, clutter, and poor light conditions. We demonstrate how this network, combined with the properties of the DVS, allows the robot to avoid obstacles using a simple biologically-inspired dynamics. We also show how a Dynamic Neural Field for target acquisition can be implemented in spiking neuromorphic hardware. This work demonstrates an implementation of working obstacle avoidance and target acquisition using mixed signal analog/digital neuromorphic hardware. PMID:28747883

Flow through a very porous obstacle in a shallow channel.

PubMed

Creed, M J; Draper, S; Nishino, T; Borthwick, A G L

2017-04-01

A theoretical model, informed by numerical simulations based on the shallow water equations, is developed to predict the flow passing through and around a uniform porous obstacle in a shallow channel, where background friction is important. This problem is relevant to a number of practical situations, including flow through aquatic vegetation, the performance of arrays of turbines in tidal channels and hydrodynamic forces on offshore structures. To demonstrate this relevance, the theoretical model is used to (i) reinterpret core flow velocities in existing laboratory-based data for an array of emergent cylinders in shallow water emulating aquatic vegetation and (ii) reassess the optimum arrangement of tidal turbines to generate power in a tidal channel. Comparison with laboratory-based data indicates a maximum obstacle resistance (or minimum porosity) for which the present theoretical model is valid. When the obstacle resistance is above this threshold the shallow water equations do not provide an adequate representation of the flow, and the theoretical model over-predicts the core flow passing through the obstacle. The second application of the model confirms that natural bed resistance increases the power extraction potential for a partial tidal fence in a shallow channel and alters the optimum arrangement of turbines within the fence.

Evaluation of Mental Workload among ICU Ward's Nurses.

PubMed

Mohammadi, Mohsen; Mazloumi, Adel; Kazemi, Zeinab; Zeraati, Hojat

2015-01-01

High level of workload has been identified among stressors of nurses in intensive care units (ICUs). The present study investigated nursing workload and identified its influencing perfor-mance obstacles in ICUs. This cross-sectional study was conducted, in 2013, on 81 nurses working in ICUs in Imam Khomeini Hospital in Tehran, Iran. NASA-TLX was applied for assessment of workload. Moreover, ICUs Performance Obstacles Questionnaire was used to identify performance obstacles associated with ICU nursing. Physical demand (mean=84.17) was perceived as the most important dimensions of workload by nurses. The most critical performance obstacles affecting workload included: difficulty in finding a place to sit down, hectic workplace, disorganized workplace, poor-conditioned equipment, waiting for using a piece of equipment, spending much time seeking for supplies in the central stock, poor quality of medical materials, delay in getting medications, unpredicted problems, disorganized central stock, outpatient surgery, spending much time dealing with family needs, late, inadequate, and useless help from nurse assistants, and ineffective morning rounds (P-value<0.05). Various performance obstacles are correlated with nurses' workload, affirms the significance of nursing work system characteristics. Interventions are recommended based on the results of this study in the work settings of nurses in ICUs.

Simple Smartphone-Based Guiding System for Visually Impaired People

PubMed Central

Lin, Bor-Shing; Lee, Cheng-Che; Chiang, Pei-Ying

2017-01-01

Visually impaired people are often unaware of dangers in front of them, even in familiar environments. Furthermore, in unfamiliar environments, such people require guidance to reduce the risk of colliding with obstacles. This study proposes a simple smartphone-based guiding system for solving the navigation problems for visually impaired people and achieving obstacle avoidance to enable visually impaired people to travel smoothly from a beginning point to a destination with greater awareness of their surroundings. In this study, a computer image recognition system and smartphone application were integrated to form a simple assisted guiding system. Two operating modes, online mode and offline mode, can be chosen depending on network availability. When the system begins to operate, the smartphone captures the scene in front of the user and sends the captured images to the backend server to be processed. The backend server uses the faster region convolutional neural network algorithm or the you only look once algorithm to recognize multiple obstacles in every image, and it subsequently sends the results back to the smartphone. The results of obstacle recognition in this study reached 60%, which is sufficient for assisting visually impaired people in realizing the types and locations of obstacles around them. PMID:28608811

Simple Smartphone-Based Guiding System for Visually Impaired People.

PubMed

Lin, Bor-Shing; Lee, Cheng-Che; Chiang, Pei-Ying

2017-06-13

Visually impaired people are often unaware of dangers in front of them, even in familiar environments. Furthermore, in unfamiliar environments, such people require guidance to reduce the risk of colliding with obstacles. This study proposes a simple smartphone-based guiding system for solving the navigation problems for visually impaired people and achieving obstacle avoidance to enable visually impaired people to travel smoothly from a beginning point to a destination with greater awareness of their surroundings. In this study, a computer image recognition system and smartphone application were integrated to form a simple assisted guiding system. Two operating modes, online mode and offline mode, can be chosen depending on network availability. When the system begins to operate, the smartphone captures the scene in front of the user and sends the captured images to the backend server to be processed. The backend server uses the faster region convolutional neural network algorithm or the you only look once algorithm to recognize multiple obstacles in every image, and it subsequently sends the results back to the smartphone. The results of obstacle recognition in this study reached 60%, which is sufficient for assisting visually impaired people in realizing the types and locations of obstacles around them.

Obstacle Avoidance and Target Acquisition for Robot Navigation Using a Mixed Signal Analog/Digital Neuromorphic Processing System.

PubMed

Milde, Moritz B; Blum, Hermann; Dietmüller, Alexander; Sumislawska, Dora; Conradt, Jörg; Indiveri, Giacomo; Sandamirskaya, Yulia

2017-01-01

Neuromorphic hardware emulates dynamics of biological neural networks in electronic circuits offering an alternative to the von Neumann computing architecture that is low-power, inherently parallel, and event-driven. This hardware allows to implement neural-network based robotic controllers in an energy-efficient way with low latency, but requires solving the problem of device variability, characteristic for analog electronic circuits. In this work, we interfaced a mixed-signal analog-digital neuromorphic processor ROLLS to a neuromorphic dynamic vision sensor (DVS) mounted on a robotic vehicle and developed an autonomous neuromorphic agent that is able to perform neurally inspired obstacle-avoidance and target acquisition. We developed a neural network architecture that can cope with device variability and verified its robustness in different environmental situations, e.g., moving obstacles, moving target, clutter, and poor light conditions. We demonstrate how this network, combined with the properties of the DVS, allows the robot to avoid obstacles using a simple biologically-inspired dynamics. We also show how a Dynamic Neural Field for target acquisition can be implemented in spiking neuromorphic hardware. This work demonstrates an implementation of working obstacle avoidance and target acquisition using mixed signal analog/digital neuromorphic hardware.

Blindness enhances auditory obstacle circumvention: Assessing echolocation, sensory substitution, and visual-based navigation

PubMed Central

Scarfe, Amy C.; Moore, Brian C. J.; Pardhan, Shahina

2017-01-01

Performance for an obstacle circumvention task was assessed under conditions of visual, auditory only (using echolocation) and tactile (using a sensory substitution device, SSD) guidance. A Vicon motion capture system was used to measure human movement kinematics objectively. Ten normally sighted participants, 8 blind non-echolocators, and 1 blind expert echolocator navigated around a 0.6 x 2 m obstacle that was varied in position across trials, at the midline of the participant or 25 cm to the right or left. Although visual guidance was the most effective, participants successfully circumvented the obstacle in the majority of trials under auditory or SSD guidance. Using audition, blind non-echolocators navigated more effectively than blindfolded sighted individuals with fewer collisions, lower movement times, fewer velocity corrections and greater obstacle detection ranges. The blind expert echolocator displayed performance similar to or better than that for the other groups using audition, but was comparable to that for the other groups using the SSD. The generally better performance of blind than of sighted participants is consistent with the perceptual enhancement hypothesis that individuals with severe visual deficits develop improved auditory abilities to compensate for visual loss, here shown by faster, more fluid, and more accurate navigation around obstacles using sound. PMID:28407000

Blindness enhances auditory obstacle circumvention: Assessing echolocation, sensory substitution, and visual-based navigation.

PubMed

Kolarik, Andrew J; Scarfe, Amy C; Moore, Brian C J; Pardhan, Shahina

2017-01-01

Performance for an obstacle circumvention task was assessed under conditions of visual, auditory only (using echolocation) and tactile (using a sensory substitution device, SSD) guidance. A Vicon motion capture system was used to measure human movement kinematics objectively. Ten normally sighted participants, 8 blind non-echolocators, and 1 blind expert echolocator navigated around a 0.6 x 2 m obstacle that was varied in position across trials, at the midline of the participant or 25 cm to the right or left. Although visual guidance was the most effective, participants successfully circumvented the obstacle in the majority of trials under auditory or SSD guidance. Using audition, blind non-echolocators navigated more effectively than blindfolded sighted individuals with fewer collisions, lower movement times, fewer velocity corrections and greater obstacle detection ranges. The blind expert echolocator displayed performance similar to or better than that for the other groups using audition, but was comparable to that for the other groups using the SSD. The generally better performance of blind than of sighted participants is consistent with the perceptual enhancement hypothesis that individuals with severe visual deficits develop improved auditory abilities to compensate for visual loss, here shown by faster, more fluid, and more accurate navigation around obstacles using sound.

Voluntary community service in medical school: a qualitative study on obstacles faced by student leaders and potential solutions

PubMed Central

Loh, Alvona Zi Hui; Tan, Julia Shi Yu; Lee, Jeannette Jen-Mai; Koh, Gerald Choon-Huat

2015-01-01

Purpose In medical school, students may participate in various community involvement projects (CIP), which serve disadvantaged communities. However, several obstacles may arise during these projects. The authors conducted a qualitative study with the primary aim of understanding the obstacles and corresponding potential solutions when medical students in Singapore participate in local CIP (LCIP) and overseas CIP (OCIP). Design The authors recruited medical students from Yong Loo Lin School of Medicine, National University of Singapore, who were also leaders of a specific community service project done in medical school. Twelve one-to-one interviews were held for the participants from 6 to 8 January 2013. Participants were led in a discussion based on an interview guide. The interviews were audio-recorded and transcribed into free-flow text. Subsequently, content and thematic analyses of the transcripts were performed independently by three researchers. Results The medical students faced many common obstacles during their community service projects. These obstacles include difficulties in recruiting and managing volunteers, attaining recognition or credibility for the project to acquire funding and resources, adjusting to a different culture or language, setting goals, and facing project-specific obstacles. Potential solutions were offered for some obstacles, such as building a strong executive committee for the project, grooming successive batches of leaders, and improving the project's public image, mentorship, reflections, and sustainability plans. Conclusions Mentorship, reflections, and sustainability are potential solutions that have been proposed to tackle the obstacles faced during community service participation in medical school. However, there may still be difficulty in solving some of the problems even after these measures are put into practice. Future research may focus on evaluating the effectiveness of these suggested solutions. PMID:26490690

Voluntary community service in medical school: a qualitative study on obstacles faced by student leaders and potential solutions.

PubMed

Loh, Alvona Zi Hui; Tan, Julia Shi Yu; Lee, Jeannette Jen-Mai; Koh, Gerald Choon-Huat

2015-01-01

In medical school, students may participate in various community involvement projects (CIP), which serve disadvantaged communities. However, several obstacles may arise during these projects. The authors conducted a qualitative study with the primary aim of understanding the obstacles and corresponding potential solutions when medical students in Singapore participate in local CIP (LCIP) and overseas CIP (OCIP). The authors recruited medical students from Yong Loo Lin School of Medicine, National University of Singapore, who were also leaders of a specific community service project done in medical school. Twelve one-to-one interviews were held for the participants from 6 to 8 January 2013. Participants were led in a discussion based on an interview guide. The interviews were audio-recorded and transcribed into free-flow text. Subsequently, content and thematic analyses of the transcripts were performed independently by three researchers. The medical students faced many common obstacles during their community service projects. These obstacles include difficulties in recruiting and managing volunteers, attaining recognition or credibility for the project to acquire funding and resources, adjusting to a different culture or language, setting goals, and facing project-specific obstacles. Potential solutions were offered for some obstacles, such as building a strong executive committee for the project, grooming successive batches of leaders, and improving the project's public image, mentorship, reflections, and sustainability plans. Mentorship, reflections, and sustainability are potential solutions that have been proposed to tackle the obstacles faced during community service participation in medical school. However, there may still be difficulty in solving some of the problems even after these measures are put into practice. Future research may focus on evaluating the effectiveness of these suggested solutions.

Sensorimotor integration of vision and proprioception for obstacle crossing in ambulatory individuals with spinal cord injury.

PubMed

Malik, Raza Naseem; Cote, Rachel; Lam, Tania

2017-01-01

Skilled walking, such as obstacle crossing, is an essential component of functional mobility. Sensorimotor integration of visual and proprioceptive inputs is important for successful obstacle crossing. The objective of this study was to understand how proprioceptive deficits affect obstacle-crossing strategies when controlling for variations in motor deficits in ambulatory individuals with spinal cord injury (SCI). Fifteen ambulatory individuals with SCI and 15 able-bodied controls were asked to step over an obstacle scaled to their motor abilities under full and obstructed vision conditions. An eye tracker was used to determine gaze behaviour and motion capture analysis was used to determine toe kinematics relative to the obstacle. Combined, bilateral hip and knee proprioceptive sense (joint position sense and movement detection sense) was assessed using the Lokomat and customized software controls. Combined, bilateral hip and knee proprioceptive sense in subjects with SCI varied and was significantly different from able-bodied subjects. Subjects with greater proprioceptive deficits stepped higher over the obstacle with their lead and trail limbs in the obstructed vision condition compared with full vision. Subjects with SCI also glanced at the obstacle more frequently and with longer fixation times compared with controls, but this was not related to proprioceptive sense. This study indicates that ambulatory individuals with SCI rely more heavily on vision to cross obstacles and show impairments in key gait parameters required for successful obstacle crossing. Our data suggest that proprioceptive deficits need to be considered in rehabilitation programs aimed at improving functional mobility in ambulatory individuals with SCI. This work is unique since it examines the contribution of combined, bilateral hip and knee proprioceptive sense on the recovery of skilled walking function, in addition to characterizing gaze behavior during a skilled walking task in people with motor-incomplete spinal cord injury. Copyright © 2017 the American Physiological Society.

Waist-up protection for blind individuals using the EyeCane as a primary and secondary mobility aid.

PubMed

Buchs, Galit; Simon, Noa; Maidenbaum, Shachar; Amedi, Amir

2017-01-01

One of the most stirring statistics in relation to the mobility of blind individuals is the high rate of upper body injuries, even when using the white-cane. We here addressed a rehabilitation- oriented challenge of providing a reliable tool for blind people to avoid waist-up obstacles, namely one of the impediments to their successful mobility using currently available methods (e.g., white-cane). We used the EyeCane, a device we developed which translates distances from several angles to haptic and auditory cues in an intuitive and unobtrusive manner, serving both as a primary and secondary mobility aid. We investigated the rehabilitation potential of such a device in facilitating visionless waist-up body protection. After ∼5 minutes of training with the EyeCane blind participants were able to successfully detect and avoid obstacles waist-high and up. This was significantly higher than their success when using the white-cane alone. As avoidance of obstacles required participants to perform an additional cognitive process after their detection, the avoidance rate was significantly lower than the detection rate. Our work has demonstrated that the EyeCane has the potential to extend the sensory world of blind individuals by expanding their currently accessible inputs, and has offered them a new practical rehabilitation tool.

Variations on Bayesian Prediction and Inference

DTIC Science & Technology

2016-05-09

inference 2.2.1 Background There are a number of statistical inference problems that are not generally formulated via a full probability model...problem of inference about an unknown parameter, the Bayesian approach requires a full probability 1. REPORT DATE (DD-MM-YYYY) 4. TITLE AND...the problem of inference about an unknown parameter, the Bayesian approach requires a full probability model/likelihood which can be an obstacle

The Problem-Solving Approach of Health and Education Professionals Who Have Experience in the Arts as an Artist and Personal Experience in Trauma

ERIC Educational Resources Information Center

Myers, Chanel Laura

2017-01-01

Clients face many different obstacles within healthcare and education settings. Professionals in health and education fields are in a position to be a problem-solving resource to clients, students, and patients. The subset of professionals being examined are problem-solving professionals, who work with clients/students/patients, within the health…

An integrated collision prediction and avoidance scheme for mobile robots in non-stationary environments

NASA Technical Reports Server (NTRS)

Kyriakopoulos, K. J.; Saridis, G. N.

1993-01-01

A formulation that makes possible the integration of collision prediction and avoidance stages for mobile robots moving in general terrains containing moving obstacles is presented. A dynamic model of the mobile robot and the dynamic constraints are derived. Collision avoidance is guaranteed if the distance between the robot and a moving obstacle is nonzero. A nominal trajectory is assumed to be known from off-line planning. The main idea is to change the velocity along the nominal trajectory so that collisions are avoided. A feedback control is developed and local asymptotic stability is proved if the velocity of the moving obstacle is bounded. Furthermore, a solution to the problem of inverse dynamics for the mobile robot is given. Simulation results verify the value of the proposed strategy.

Acoustic Scattering from Corners, Edges and Circular Cones

NASA Astrophysics Data System (ADS)

Elschner, Johannes; Hu, Guanghui

2018-05-01

Consider the time-harmonic acoustic scattering from a bounded penetrable obstacle imbedded in an isotropic homogeneous medium. The obstacle is supposed to possess a circular conic point or an edge point on the boundary in three dimensions and a planar corner point in two dimensions. The opening angles of cones and edges are allowed to be any number in {(0,2π)π}. We prove that such an obstacle scatters any incoming wave non-trivially (that is, the far field patterns cannot vanish identically), leading to the absence of real non-scattering wavenumbers. Local and global uniqueness results for the inverse problem of recovering the shape of penetrable scatterers are also obtained using a single incoming wave. Our approach relies on the singularity analysis of the inhomogeneous Laplace equation in a cone.

Why Implementing History and Philosophy in School Science Education is a Challenge: An Analysis of Obstacles

NASA Astrophysics Data System (ADS)

Höttecke, Dietmar; Silva, Cibelle Celestino

2011-03-01

Teaching and learning with history and philosophy of science (HPS) has been, and continues to be, supported by science educators. While science education standards documents in many countries also stress the importance of teaching and learning with HPS, the approach still suffers from ineffective implementation in school science teaching. In order to better understand this problem, an analysis of the obstacles of implementing HPS into classrooms was undertaken. The obstacles taken into account were structured in four groups: 1. culture of teaching physics, 2. teachers' skills, epistemological and didactical attitudes and beliefs, 3. institutional framework of science teaching, and 4. textbooks as fundamental didactical support. Implications for more effective implementation of HPS are presented, taking the social nature of educational systems into account.

A classical Perron method for existence of smooth solutions to boundary value and obstacle problems for degenerate-elliptic operators via holomorphic maps

NASA Astrophysics Data System (ADS)

Feehan, Paul M. N.

2017-09-01

We prove existence of solutions to boundary value problems and obstacle problems for degenerate-elliptic, linear, second-order partial differential operators with partial Dirichlet boundary conditions using a new version of the Perron method. The elliptic operators considered have a degeneracy along a portion of the domain boundary which is similar to the degeneracy of a model linear operator identified by Daskalopoulos and Hamilton [9] in their study of the porous medium equation or the degeneracy of the Heston operator [21] in mathematical finance. Existence of a solution to the partial Dirichlet problem on a half-ball, where the operator becomes degenerate on the flat boundary and a Dirichlet condition is only imposed on the spherical boundary, provides the key additional ingredient required for our Perron method. Surprisingly, proving existence of a solution to this partial Dirichlet problem with ;mixed; boundary conditions on a half-ball is more challenging than one might expect. Due to the difficulty in developing a global Schauder estimate and due to compatibility conditions arising where the ;degenerate; and ;non-degenerate boundaries; touch, one cannot directly apply the continuity or approximate solution methods. However, in dimension two, there is a holomorphic map from the half-disk onto the infinite strip in the complex plane and one can extend this definition to higher dimensions to give a diffeomorphism from the half-ball onto the infinite ;slab;. The solution to the partial Dirichlet problem on the half-ball can thus be converted to a partial Dirichlet problem on the slab, albeit for an operator which now has exponentially growing coefficients. The required Schauder regularity theory and existence of a solution to the partial Dirichlet problem on the slab can nevertheless be obtained using previous work of the author and C. Pop [16]. Our Perron method relies on weak and strong maximum principles for degenerate-elliptic operators, concepts of continuous subsolutions and supersolutions for boundary value and obstacle problems for degenerate-elliptic operators, and maximum and comparison principle estimates previously developed by the author [13].

Obstacle Avoidance, Visual Detection Performance, and Eye-Scanning Behavior of Glaucoma Patients in a Driving Simulator: A Preliminary Study

PubMed Central

Prado Vega, Rocío; van Leeuwen, Peter M.; Rendón Vélez, Elizabeth; Lemij, Hans G.; de Winter, Joost C. F.

2013-01-01

The objective of this study was to evaluate differences in driving performance, visual detection performance, and eye-scanning behavior between glaucoma patients and control participants without glaucoma. Glaucoma patients (n = 23) and control participants (n = 12) completed four 5-min driving sessions in a simulator. The participants were instructed to maintain the car in the right lane of a two-lane highway while their speed was automatically maintained at 100 km/h. Additional tasks per session were: Session 1: none, Session 2: verbalization of projected letters, Session 3: avoidance of static obstacles, and Session 4: combined letter verbalization and avoidance of static obstacles. Eye-scanning behavior was recorded with an eye-tracker. Results showed no statistically significant differences between patients and control participants for lane keeping, obstacle avoidance, and eye-scanning behavior. Steering activity, number of missed letters, and letter reaction time were significantly higher for glaucoma patients than for control participants. In conclusion, glaucoma patients were able to avoid objects and maintain a nominal lane keeping performance, but applied more steering input than control participants, and were more likely than control participants to miss peripherally projected stimuli. The eye-tracking results suggest that glaucoma patients did not use extra visual search to compensate for their visual field loss. Limitations of the study, such as small sample size, are discussed. PMID:24146975

Wire Detection Algorithms for Navigation

NASA Technical Reports Server (NTRS)

Kasturi, Rangachar; Camps, Octavia I.

2002-01-01

In this research we addressed the problem of obstacle detection for low altitude rotorcraft flight. In particular, the problem of detecting thin wires in the presence of image clutter and noise was studied. Wires present a serious hazard to rotorcrafts. Since they are very thin, their detection early enough so that the pilot has enough time to take evasive action is difficult, as their images can be less than one or two pixels wide. Two approaches were explored for this purpose. The first approach involved a technique for sub-pixel edge detection and subsequent post processing, in order to reduce the false alarms. After reviewing the line detection literature, an algorithm for sub-pixel edge detection proposed by Steger was identified as having good potential to solve the considered task. The algorithm was tested using a set of images synthetically generated by combining real outdoor images with computer generated wire images. The performance of the algorithm was evaluated both, at the pixel and the wire levels. It was observed that the algorithm performs well, provided that the wires are not too thin (or distant) and that some post processing is performed to remove false alarms due to clutter. The second approach involved the use of an example-based learning scheme namely, Support Vector Machines. The purpose of this approach was to explore the feasibility of an example-based learning based approach for the task of detecting wires from their images. Support Vector Machines (SVMs) have emerged as a promising pattern classification tool and have been used in various applications. It was found that this approach is not suitable for very thin wires and of course, not suitable at all for sub-pixel thick wires. High dimensionality of the data as such does not present a major problem for SVMs. However it is desirable to have a large number of training examples especially for high dimensional data. The main difficulty in using SVMs (or any other example-based learning method) is the need for a very good set of positive and negative examples since the performance depends on the quality of the training set.

A new primary mobility tool for the visually impaired: A white cane-adaptive mobility device hybrid.

PubMed

Rizzo, John-Ross; Conti, Kyle; Thomas, Teena; Hudson, Todd E; Wall Emerson, Robert; Kim, Dae Shik

2017-05-16

This article describes pilot testing of an adaptive mobility device-hybrid (AMD-H) combining properties of two primary mobility tools for people who are blind: the long cane and adaptive mobility devices (AMDs). The long cane is the primary mobility tool used by people who are blind and visually impaired for independent and safe mobility and AMDs are adaptive devices that are often lightweight frames approximately body width in lateral dimension that are simply pushed forward to clear the space in front of a person. The prototype cane built for this study had a wing apparatus that could be folded around the shaft of a cane but when unfolded, deployed two wheeled wings 25 cm (9.8 in) to each side of the canetip. This project explored drop-off and obstacle detection for 6 adults with visual impairment using the deployed AMD-H and a standard long cane. The AMD-H improved obstacle detection overall, and was most effective for the smallest obstacles (2 and 6 inch diameter). The AMD-H cut the average drop off threshold from 1.79 inches (4.55 cm) to .96 inches (2.44 cm). All participants showed a decrease in drop off detection threshold and an increase in detection rate (13.9% overall). For drop offs of 1 in (2.54 cm) and 3 in (7.62 cm), all participants showed large improvements with the AMD-H, ranging from 8.4 to 50%. The larger drop offs of 5 in (12.7 cm) and 7 in (17.8 cm) were well detected by both types of canes.

New spatial clustering-based models for optimal urban facility location considering geographical obstacles

NASA Astrophysics Data System (ADS)

Javadi, Maryam; Shahrabi, Jamal

2014-03-01

The problems of facility location and the allocation of demand points to facilities are crucial research issues in spatial data analysis and urban planning. It is very important for an organization or governments to best locate its resources and facilities and efficiently manage resources to ensure that all demand points are covered and all the needs are met. Most of the recent studies, which focused on solving facility location problems by performing spatial clustering, have used the Euclidean distance between two points as the dissimilarity function. Natural obstacles, such as mountains and rivers, can have drastic impacts on the distance that needs to be traveled between two geographical locations. While calculating the distance between various supply chain entities (including facilities and demand points), it is necessary to take such obstacles into account to obtain better and more realistic results regarding location-allocation. In this article, new models were presented for location of urban facilities while considering geographical obstacles at the same time. In these models, three new distance functions were proposed. The first function was based on the analysis of shortest path in linear network, which was called SPD function. The other two functions, namely PD and P2D, were based on the algorithms that deal with robot geometry and route-based robot navigation in the presence of obstacles. The models were implemented in ArcGIS Desktop 9.2 software using the visual basic programming language. These models were evaluated using synthetic and real data sets. The overall performance was evaluated based on the sum of distance from demand points to their corresponding facilities. Because of the distance between the demand points and facilities becoming more realistic in the proposed functions, results indicated desired quality of the proposed models in terms of quality of allocating points to centers and logistic cost. Obtained results show promising improvements of the allocation, the logistics costs and the response time. It can also be inferred from this study that the P2D-based model and the SPD-based model yield similar results in terms of the facility location and the demand allocation. It is noted that the P2D-based model showed better execution time than the SPD-based model. Considering logistic costs, facility location and response time, the P2D-based model was appropriate choice for urban facility location problem considering the geographical obstacles.

Problems of Manpower in Agriculture. OECD Documentation in Food and Agriculture.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

Problems related to rapid reduction of the agricultural labor force were examined in the 21 Organisation for Economic Co-operation and Development countries. The size and changes of the agricultural labor force, economic forces tending towards change, technical requirements for labor in agriculture, and obstacles hindering economic adjustment of…

Applying Global Workspace Theory to the Frame Problem

ERIC Educational Resources Information Center

Shanahan, Murray; Baars, Bernard

2005-01-01

The subject of this article is the frame problem, as conceived by certain cognitive scientists and philosophers of mind, notably Fodor for whom it stands as a fundamental obstacle to progress in cognitive science. The challenge is to explain the capacity of so-called informationally unencapsulated cognitive processes to deal effectively with…

Computer-aided system for detecting runway incursions

NASA Astrophysics Data System (ADS)

Sridhar, Banavar; Chatterji, Gano B.

1994-07-01

A synthetic vision system for enhancing the pilot's ability to navigate and control the aircraft on the ground is described. The system uses the onboard airport database and images acquired by external sensors. Additional navigation information needed by the system is provided by the Inertial Navigation System and the Global Positioning System. The various functions of the system, such as image enhancement, map generation, obstacle detection, collision avoidance, guidance, etc., are identified. The available technologies, some of which were developed at NASA, that are applicable to the aircraft ground navigation problem are noted. Example images of a truck crossing the runway while the aircraft flies close to the runway centerline are described. These images are from a sequence of images acquired during one of the several flight experiments conducted by NASA to acquire data to be used for the development and verification of the synthetic vision concepts. These experiments provide a realistic database including video and infrared images, motion states from the Inertial Navigation System and the Global Positioning System, and camera parameters.

Often Overlooked Obstacles of Office Landscaping

ERIC Educational Resources Information Center

Jenkins, William A.; Shoaf, Lawrence G.

1973-01-01

Discusses nine of the most serious limitations of the office landscape concept: status screens, noise level, privacy problem, hazard control, security, unjustifiable changes, thermal environment, storage, and future planning. (Author/MF)

Quality metrics for sensor images

NASA Technical Reports Server (NTRS)

Ahumada, AL

1993-01-01

Methods are needed for evaluating the quality of augmented visual displays (AVID). Computational quality metrics will help summarize, interpolate, and extrapolate the results of human performance tests with displays. The FLM Vision group at NASA Ames has been developing computational models of visual processing and using them to develop computational metrics for similar problems. For example, display modeling systems use metrics for comparing proposed displays, halftoning optimizing methods use metrics to evaluate the difference between the halftone and the original, and image compression methods minimize the predicted visibility of compression artifacts. The visual discrimination models take as input two arbitrary images A and B and compute an estimate of the probability that a human observer will report that A is different from B. If A is an image that one desires to display and B is the actual displayed image, such an estimate can be regarded as an image quality metric reflecting how well B approximates A. There are additional complexities associated with the problem of evaluating the quality of radar and IR enhanced displays for AVID tasks. One important problem is the question of whether intruding obstacles are detectable in such displays. Although the discrimination model can handle detection situations by making B the original image A plus the intrusion, this detection model makes the inappropriate assumption that the observer knows where the intrusion will be. Effects of signal uncertainty need to be added to our models. A pilot needs to make decisions rapidly. The models need to predict not just the probability of a correct decision, but the probability of a correct decision by the time the decision needs to be made. That is, the models need to predict latency as well as accuracy. Luce and Green have generated models for auditory detection latencies. Similar models are needed for visual detection. Most image quality models are designed for static imagery. Watson has been developing a general spatial-temporal vision model to optimize video compression techniques. These models need to be adapted and calibrated for AVID applications.

Computational extended magneto-hydrodynamical study of shock structure generated by flows past an obstacle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Xuan, E-mail: xzhao@cylance.com; Seyler, C. E., E-mail: ces7@cornell.edu

2015-07-15

The magnetized shock problem is studied in the context where supersonic plasma flows past a solid obstacle. This problem exhibits interesting and important phenomena such as a bow shock, magnetotail formation, reconnection, and plasmoid formation. This study is carried out using a discontinuous Galerkin method to solve an extended magneto-hydrodynamic model (XMHD). The main goals of this paper are to present a reasonably complete picture of the properties of this interaction using the MHD model and then to compare the results to the XMHD model. The inflow parameters, such as the magnetosonic Mach number M{sub f} and the ratio ofmore » thermal pressure to magnetic pressure β, can significantly affect the physical structures of the flow-obstacle interaction. The Hall effect can also significantly influence the results in the regime in which the ion inertial length is numerically resolved. Most of the results presented are for the two-dimensional case; however, two three-dimensional simulations are presented to make a connection to the important case in which the solar wind interacts with a solid body and to explore the possibility of performing scaled laboratory experiments.« less

Rules to fly by: pigeons navigating horizontal obstacles limit steering by selecting gaps most aligned to their flight direction.

PubMed

Ros, Ivo G; Bhagavatula, Partha S; Lin, Huai-Ti; Biewener, Andrew A

2017-02-06

Flying animals must successfully contend with obstacles in their natural environments. Inspired by the robust manoeuvring abilities of flying animals, unmanned aerial systems are being developed and tested to improve flight control through cluttered environments. We previously examined steering strategies that pigeons adopt to fly through an array of vertical obstacles (VOs). Modelling VO flight guidance revealed that pigeons steer towards larger visual gaps when making fast steering decisions. In the present experiments, we recorded three-dimensional flight kinematics of pigeons as they flew through randomized arrays of horizontal obstacles (HOs). We found that pigeons still decelerated upon approach but flew faster through a denser array of HOs compared with the VO array previously tested. Pigeons exhibited limited steering and chose gaps between obstacles most aligned to their immediate flight direction, in contrast to VO navigation that favoured widest gap steering. In addition, pigeons navigated past the HOs with more variable and decreased wing stroke span and adjusted their wing stroke plane to reduce contact with the obstacles. Variability in wing extension, stroke plane and wing stroke path was greater during HO flight. Pigeons also exhibited pronounced head movements when negotiating HOs, which potentially serve a visual function. These head-bobbing-like movements were most pronounced in the horizontal (flight direction) and vertical directions, consistent with engaging motion vision mechanisms for obstacle detection. These results show that pigeons exhibit a keen kinesthetic sense of their body and wings in relation to obstacles. Together with aerodynamic flapping flight mechanics that favours vertical manoeuvring, pigeons are able to navigate HOs using simple rules, with remarkable success.

Rules to fly by: pigeons navigating horizontal obstacles limit steering by selecting gaps most aligned to their flight direction

PubMed Central

Ros, Ivo G.; Bhagavatula, Partha S.; Lin, Huai-Ti

2017-01-01

Flying animals must successfully contend with obstacles in their natural environments. Inspired by the robust manoeuvring abilities of flying animals, unmanned aerial systems are being developed and tested to improve flight control through cluttered environments. We previously examined steering strategies that pigeons adopt to fly through an array of vertical obstacles (VOs). Modelling VO flight guidance revealed that pigeons steer towards larger visual gaps when making fast steering decisions. In the present experiments, we recorded three-dimensional flight kinematics of pigeons as they flew through randomized arrays of horizontal obstacles (HOs). We found that pigeons still decelerated upon approach but flew faster through a denser array of HOs compared with the VO array previously tested. Pigeons exhibited limited steering and chose gaps between obstacles most aligned to their immediate flight direction, in contrast to VO navigation that favoured widest gap steering. In addition, pigeons navigated past the HOs with more variable and decreased wing stroke span and adjusted their wing stroke plane to reduce contact with the obstacles. Variability in wing extension, stroke plane and wing stroke path was greater during HO flight. Pigeons also exhibited pronounced head movements when negotiating HOs, which potentially serve a visual function. These head-bobbing-like movements were most pronounced in the horizontal (flight direction) and vertical directions, consistent with engaging motion vision mechanisms for obstacle detection. These results show that pigeons exhibit a keen kinesthetic sense of their body and wings in relation to obstacles. Together with aerodynamic flapping flight mechanics that favours vertical manoeuvring, pigeons are able to navigate HOs using simple rules, with remarkable success. PMID:28163883

3D-Sonification for Obstacle Avoidance in Brownout Conditions

NASA Technical Reports Server (NTRS)

Godfroy-Cooper, M.; Miller, J. D.; Szoboszlay, Z.; Wenzel, E. M.

2017-01-01

Helicopter brownout is a phenomenon that occurs when making landing approaches in dusty environments, whereby sand or dust particles become swept up in the rotor outwash. Brownout is characterized by partial or total obscuration of the terrain, which degrades visual cues necessary for hovering and safe landing. Furthermore, the motion of the dust cloud produced during brownout can lead to the pilot experiencing motion cue anomalies such as vection illusions. In this context, the stability and guidance control functions can be intermittently or continuously degraded, potentially leading to undetected surface hazards and obstacles as well as unnoticed drift. Safe and controlled landing in brownout can be achieved using an integrated presentation of LADAR and RADAR imagery and aircraft state symbology. However, though detected by the LADAR and displayed on the sensor image, small obstacles can be difficult to discern from the background so that changes in obstacle elevation may go unnoticed. Moreover, pilot workload associated with tracking the displayed symbology is often so high that the pilot cannot give sufficient attention to the LADAR/RADAR image. This paper documents a simulation evaluating the use of 3D auditory cueing for obstacle avoidance in brownout as a replacement for or compliment to LADAR/RADAR imagery.

Reliable in their failure: an analysis of healthcare reform policies in public systems.

PubMed

Contandriopoulos, Damien; Brousselle, Astrid

2010-05-01

In this paper, we analyze recommendations of past governmental commissions and their implementation in Quebec as a case to discuss the obstacles that litter the road to healthcare system reform. Our analysis shows that the obstacles to tackling the healthcare system's main problems may have less to do with programmatic (what to do) than with political and governance (how to do it) questions. We then draw on neo-institutional theory to discuss the causes and effects of this situation. Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.

Real-Time Occupancy Change Analyzer

DOE Office of Scientific and Technical Information (OSTI.GOV)

2005-03-30

The Real-Time Occupancy Change Analyzer (ROCA) produces an occupancy grid map of an environment around the robot, scans the environment to generate a current obstacle map relative to a current robot position, and converts the current obstacle map to a current occupancy grid map. Changes in the occupancy grid can be reported in real time to support a number of tracking capabilities. The benefit of ROCA is that rather than only providing a vector to the detected change, it provides the actual x,y position of the change.

Obstacles to the discussion of sexual problems in menopausal women: a qualitative study of healthcare providers.

PubMed

Ghazanfarpour, Masoumeh; Khadivzadeh, Talat; Latifnejad Roudsari, Robab; Mehdi Hazavehei, Seyed Mohammad

2017-07-01

The aim of this study was to explore issues that challenge menopausal women in discussions of their sexual problems with a physician. This was done from the perspective of healthcare providers. In a descriptive exploratory qualitative study, using a semi-structured interview and purposive sampling, a sample set of 12 midwives and 13 general practitioners aged 25-70 years were selected in order to elicit meaning behind their experiences about the subject under study. Data analysis was carried out using qualitative content analysis. Results were used to identify a number of obstacles that hindered women from seeking help for sexual problems from GPs and midwives. These obstacles included the following: (1) traditional and cultural beliefs; (2) religious belief; (3) individuals' beliefs and (4) access to services. More research is needed to explore effective strategies to overcome these problems. Impact statement Current knowledge on the subject: In the literature, many reasons have been identified for the unwillingness of Iranian women to discuss their sexual problems with health providers. These include lack of time, feelings of shame and an expectation that a doctor cannot help. However, no qualitative study has addressed barriers held by menopausal women for seeking treatment for sexual problems. The contribution made by the results of this study: The results of this study add to the growing body of research on reasons that determine why most postmenopausal women rarely visit a doctor unless they were in tremendous physical or emotional pain. Also, menopausal women thought that an unmarried health provider would be less understanding about sexual and marital problems and they felt guilty about sharing such issues with them. Patients' opinions on the nature of menopause (a pathological vs. physiological process) affect the way in which the symptoms of menopause and sexual problems are handled by patient. The implications are of these findings for clinical practice and further research: The results of this study can be used to formulate guidelines to cultural sensitivity appropriate to Iranian society.

Sensorimotor Model of Obstacle Avoidance in Echolocating Bats

PubMed Central

Vanderelst, Dieter; Holderied, Marc W.; Peremans, Herbert

2015-01-01

Bat echolocation is an ability consisting of many subtasks such as navigation, prey detection and object recognition. Understanding the echolocation capabilities of bats comes down to isolating the minimal set of acoustic cues needed to complete each task. For some tasks, the minimal cues have already been identified. However, while a number of possible cues have been suggested, little is known about the minimal cues supporting obstacle avoidance in echolocating bats. In this paper, we propose that the Interaural Intensity Difference (IID) and travel time of the first millisecond of the echo train are sufficient cues for obstacle avoidance. We describe a simple control algorithm based on the use of these cues in combination with alternating ear positions modeled after the constant frequency bat Rhinolophus rouxii. Using spatial simulations (2D and 3D), we show that simple phonotaxis can steer a bat clear from obstacles without performing a reconstruction of the 3D layout of the scene. As such, this paper presents the first computationally explicit explanation for obstacle avoidance validated in complex simulated environments. Based on additional simulations modelling the FM bat Phyllostomus discolor, we conjecture that the proposed cues can be exploited by constant frequency (CF) bats and frequency modulated (FM) bats alike. We hypothesize that using a low level yet robust cue for obstacle avoidance allows bats to comply with the hard real-time constraints of this basic behaviour. PMID:26502063

QUANTITATIVE MEASUREMENT OF HELICOBACTER PYLORI BY THE TAQMAN FLUOROGENIC PROBE SYSTEM

EPA Science Inventory

Culturing of H. pylori from environmental sources continues to be an obstacle in detecting and enumerating this organism. Successful methods of isolation and growth from water samples have not yet been developed. In this study a method involving real tme PCR product detection wit...

LLNL Scientist is Passionate About Targets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butlin, Becky

With a lifelong passion for problem-solving and a love of production, Becky Butlin has helped lead the National Ignition Facility Target Fabrication Team through obstacles and challenges for the past six years.

Evaluation of Mental Workload among ICU Ward's Nurses

PubMed Central

Mohammadi, Mohsen; Mazloumi, Adel; Kazemi, Zeinab; Zeraati, Hojat

2015-01-01

Background: High level of workload has been identified among stressors of nurses in intensive care units (ICUs). The present study investigated nursing workload and identified its influencing perfor­mance obstacles in ICUs. Methods: This cross-sectional study was conducted, in 2013, on 81 nurses working in ICUs in Imam Khomeini Hospital in Tehran, Iran. NASA-TLX was applied for assessment of workload. Moreover, ICUs Performance Obstacles Questionnaire was used to identify performance obstacles associated with ICU nursing. Results: Physical demand (mean=84.17) was perceived as the most important dimensions of workload by nurses. The most critical performance obstacles affecting workload included: difficulty in finding a place to sit down, hectic workplace, disorganized workplace, poor-conditioned equipment, waiting for using a piece of equipment, spending much time seeking for supplies in the central stock, poor quality of medical materials, delay in getting medications, unpredicted problems, disorganized central stock, outpatient surgery, spending much time dealing with family needs, late, inadequate, and useless help from nurse assistants, and ineffective morning rounds (P-value<0.05). Conclusion: Various performance obstacles are correlated with nurses' workload, affirms the significance of nursing work system characteristics. Interventions are recommended based on the results of this study in the work settings of nurses in ICUs. PMID:26933647

Flow through a very porous obstacle in a shallow channel

PubMed Central

Draper, S.; Nishino, T.; Borthwick, A. G. L.

2017-01-01

A theoretical model, informed by numerical simulations based on the shallow water equations, is developed to predict the flow passing through and around a uniform porous obstacle in a shallow channel, where background friction is important. This problem is relevant to a number of practical situations, including flow through aquatic vegetation, the performance of arrays of turbines in tidal channels and hydrodynamic forces on offshore structures. To demonstrate this relevance, the theoretical model is used to (i) reinterpret core flow velocities in existing laboratory-based data for an array of emergent cylinders in shallow water emulating aquatic vegetation and (ii) reassess the optimum arrangement of tidal turbines to generate power in a tidal channel. Comparison with laboratory-based data indicates a maximum obstacle resistance (or minimum porosity) for which the present theoretical model is valid. When the obstacle resistance is above this threshold the shallow water equations do not provide an adequate representation of the flow, and the theoretical model over-predicts the core flow passing through the obstacle. The second application of the model confirms that natural bed resistance increases the power extraction potential for a partial tidal fence in a shallow channel and alters the optimum arrangement of turbines within the fence. PMID:28484321

Confidential Clinician-reported Surveillance of Adverse Events Among Medical Inpatients

PubMed Central

Weingart, Saul N; Ship, Amy N; Aronson, Mark D

2000-01-01

BACKGROUND Although iatrogenic injury poses a significant risk to hospitalized patients, detection of adverse events (AEs) is costly and difficult. METHODS The authors developed a confidential reporting method for detecting AEs on a medicine unit of a teaching hospital. Adverse events were defined as patient injuries. Potential adverse events (PAEs) represented errors that could have, but did not result in harm. Investigators interviewed house officers during morning rounds and by e-mail, asking them to identify obstacles to high quality care and iatrogenic injuries. They compared house officer reports with hospital incident reports and patients' medical records. A multivariate regression model identified correlates of reporting. RESULTS One hundred ten events occurred, affecting 84 patients. Queries by e-mail (incidence rate ratio [IRR ]=0.16; 95% confidence interval [95% CI], 0.05 to 0.49) and on days when house officers rotated to a new service (IRR =0.12; 95% CI, 0.02 to 0.91) resulted in fewer reports. The most commonly reported process of care problems were inadequate evaluation of the patient (16.4%), failure to monitor or follow up (12.7%), and failure of the laboratory to perform a test (12.7%). Respondents identified 29 (26.4%) AEs, 52 (47.3%) PAEs, and 29 (26.4%) other house officer-identified quality problems. An AE occurred in 2.6% of admissions. The hospital incident reporting system detected only one house officer-reported event. Chart review corroborated 72.9% of events. CONCLUSIONS House officers detect many AEs among inpatients. Confidential peer interviews of front-line providers is a promising method for identifying medical errors and substandard quality. PMID:10940133

Evolutionary programming-based univector field navigation method for past mobile robots.

PubMed

Kim, Y J; Kim, J H; Kwon, D S

2001-01-01

Most of navigation techniques with obstacle avoidance do not consider the robot orientation at the target position. These techniques deal with the robot position only and are independent of its orientation and velocity. To solve these problems this paper proposes a novel univector field method for fast mobile robot navigation which introduces a normalized two dimensional vector field. The method provides fast moving robots with the desired posture at the target position and obstacle avoidance. To obtain the sub-optimal vector field, a function approximator is used and trained by evolutionary programming. Two kinds of vector fields are trained, one for the final posture acquisition and the other for obstacle avoidance. Computer simulations and real experiments are carried out for a fast moving mobile robot to demonstrate the effectiveness of the proposed scheme.

Creating Task-Centered Instruction for Web-Based Instruction: Obstacles and Solutions

ERIC Educational Resources Information Center

Gardner, Joel; Jeon, Tae

2010-01-01

Merrill proposes First Principles of Instruction, including a problem- or task-centered strategy for designing instruction. However, when the tasks or problems are ill-defined or complex, task-centered instruction can be difficult to design. We describe an online task-centered training at a land-grant university designed to train employees to use…

The Struggle To Be Strong: True Stories by Teens about Overcoming Tough Times.

ERIC Educational Resources Information Center

Desetta, Al, Ed.; Wolin, Sybil, Ed.

This book presents 30 first-person accounts by teenagers that tell how they overcame major life obstacles. Many aren't the everyday problems most kids encounter, which makes their stories especially compelling-and their successes especially inspiring. The young writers wrote their stories to help teenagers with similar problems and stresses. The…

Too Few Visits to the Dentist? The Impact on Children's Health.

ERIC Educational Resources Information Center

Shobo, Yetunde A.

Noting that although dental disease is preventable, dental decay is still the most common and costly oral health problem among children, this special Kids Count report presents information on oral health and the role of prevention and the problem of poor oral health in Arkansas. Included in the report is information on the obstacles in accessing…

Planning Paths Through Singularities in the Center of Mass Space

NASA Technical Reports Server (NTRS)

Doggett, William R.; Messner, William C.; Juang, Jer-Nan

1998-01-01

The center of mass space is a convenient space for planning motions that minimize reaction forces at the robot's base or optimize the stability of a mechanism. A unique problem associated with path planning in the center of mass space is the potential existence of multiple center of mass images for a single Cartesian obstacle, since a single center of mass location can correspond to multiple robot joint configurations. The existence of multiple images results in a need to either maintain multiple center of mass obstacle maps or to update obstacle locations when the robot passes through a singularity, such as when it moves from an elbow-up to an elbow-down configuration. To illustrate the concepts presented in this paper, a path is planned for an example task requiring motion through multiple center of mass space maps. The object of the path planning algorithm is to locate the bang- bang acceleration profile that minimizes the robot's base reactions in the presence of a single Cartesian obstacle. To simplify the presentation, only non-redundant robots are considered and joint non-linearities are neglected.

Analysis of pinching in deterministic particle separation

NASA Astrophysics Data System (ADS)

Risbud, Sumedh; Luo, Mingxiang; Frechette, Joelle; Drazer, German

2011-11-01

We investigate the problem of spherical particles vertically settling parallel to Y-axis (under gravity), through a pinching gap created by an obstacle (spherical or cylindrical, center at the origin) and a wall (normal to X axis), to uncover the physics governing microfluidic separation techniques such as deterministic lateral displacement and pinched flow fractionation: (1) theoretically, by linearly superimposing the resistances offered by the wall and the obstacle separately, (2) computationally, using the lattice Boltzmann method for particulate systems and (3) experimentally, by conducting macroscopic experiments. Both, theory and simulations, show that for a given initial separation between the particle centre and the Y-axis, presence of a wall pushes the particles closer to the obstacle, than its absence. Experimentally, this is expected to result in an early onset of the short-range repulsive forces caused by solid-solid contact. We indeed observe such an early onset, which we quantify by measuring the asymmetry in the trajectories of the spherical particles around the obstacle. This work is partially supported by the National Science Foundation Grant Nos. CBET- 0731032, CMMI-0748094, and CBET-0954840.

Animating Wall-Bounded Turbulent Smoke via Filament-Mesh Particle-Particle Method.

PubMed

Liao, Xiangyun; Si, Weixin; Yuan, Zhiyong; Sun, Hanqiu; Qin, Jing; Wang, Qiong; Heng, Pheng-Ann; Xiangyun Liao; Weixin Si; Zhiyong Yuan; Hanqiu Sun; Jing Qin; Qiong Wang; Pheng-Ann Heng

2018-03-01

Turbulent vortices in smoke flows are crucial for a visually interesting appearance. Unfortunately, it is challenging to efficiently simulate these appealing effects in the framework of vortex filament methods. The vortex filaments in grids scheme allows to efficiently generate turbulent smoke with macroscopic vortical structures, but suffers from the projection-related dissipation, and thus the small-scale vortical structures under grid resolution are hard to capture. In addition, this scheme cannot be applied in wall-bounded turbulent smoke simulation, which requires efficiently handling smoke-obstacle interaction and creating vorticity at the obstacle boundary. To tackle above issues, we propose an effective filament-mesh particle-particle (FMPP) method for fast wall-bounded turbulent smoke simulation with ample details. The Filament-Mesh component approximates the smooth long-range interactions by splatting vortex filaments on grid, solving the Poisson problem with a fast solver, and then interpolating back to smoke particles. The Particle-Particle component introduces smoothed particle hydrodynamics (SPH) turbulence model for particles in the same grid, where interactions between particles cannot be properly captured under grid resolution. Then, we sample the surface of obstacles with boundary particles, allowing the interaction between smoke and obstacle being treated as pressure forces in SPH. Besides, the vortex formation region is defined at the back of obstacles, providing smoke particles flowing by the separation particles with a vorticity force to simulate the subsequent vortex shedding phenomenon. The proposed approach can synthesize the lost small-scale vortical structures and also achieve the smoke-obstacle interaction with vortex shedding at obstacle boundaries in a lightweight manner. The experimental results demonstrate that our FMPP method can achieve more appealing visual effects than vortex filaments in grids scheme by efficiently simulating more vivid thin turbulent features.

Waist-up protection for blind individuals using the EyeCane as a primary and secondary mobility aid

PubMed Central

Buchs, Galit; Simon, Noa; Maidenbaum, Shachar; Amedi, Amir

2017-01-01

Background: One of the most stirring statistics in relation to the mobility of blind individuals is the high rate of upper body injuries, even when using the white-cane. Objective: We here addressed a rehabilitation- oriented challenge of providing a reliable tool for blind people to avoid waist-up obstacles, namely one of the impediments to their successful mobility using currently available methods (e.g., white-cane). Methods: We used the EyeCane, a device we developed which translates distances from several angles to haptic and auditory cues in an intuitive and unobtrusive manner, serving both as a primary and secondary mobility aid. We investigated the rehabilitation potential of such a device in facilitating visionless waist-up body protection. Results: After ∼5 minutes of training with the EyeCane blind participants were able to successfully detect and avoid obstacles waist-high and up. This was significantly higher than their success when using the white-cane alone. As avoidance of obstacles required participants to perform an additional cognitive process after their detection, the avoidance rate was significantly lower than the detection rate. Conclusion: Our work has demonstrated that the EyeCane has the potential to extend the sensory world of blind individuals by expanding their currently accessible inputs, and has offered them a new practical rehabilitation tool. PMID:28157111

Language Problems in Demographic Field Work in Africa: The Case of the Cameroon Fertility Survey. Scientific Reports, No. 2.

ERIC Educational Resources Information Center

Ware, Helen

This report is the result of a two-month study commissioned by the World Fertility Survey prior to the inclusion of Cameroon in the WFS program, in order to examine the problem of linguistic diversity and the obstacles this problem might pose to a demographic survey of the country. The study was to propose a strategy which would uphold the WFS…

Risk factors for child abuse: levels of knowledge and difficulties in family medicine. A mixed method study.

PubMed

Regnaut, Océane; Jeu-Steenhouwer, Marie; Manaouil, Cécile; Gignon, Maxime

2015-10-30

Family physicians (FPs) have a central role in the detection and management of child abuse. According to the literature, only 2-5% of initial reports of child abuse come from the medical profession. The objective of this study was to assess levels of knowledge of risk factors for child abuse by Family Physicians (FPs) and the attention that the physicians pay to these risk factors. We conducted a mixed-method survey based on semi-structured interviews. 50 FPs practicing in the Somme County (northern France) were interviewed with closed and open questions. The FPs' level of knowledge of risk factors for child abuse and obstacles in the detection of child abuse were assessed. The FPs' level of knowledge of risk factors for child abuse was similar to that reported in the literature. However, FPs knew little about the significant role of prematurity. Likewise, the FP's training did not seem to influence their knowledge of risk factors. Fear of an incorrect diagnosis was the main obstacle to reporting a suspected case. The FPs considered that they were often alone in dealing with a difficult situation and considered that the judicial system and the social services were not sufficiently active. Few FPs had actually received specific training in the detection and management of child abuse but many stated their need for this type of training. FPs encounter many obstacles in the detection of child abuse, which sometimes make the FP reluctant to report a suspected or potential case. Medical education need to be improved in this field.

Preliminary Analysis of a Randomized Trial of Computer Attention Training in Children with Attention-Deficit/Hyperactivity Disorder

ERIC Educational Resources Information Center

Steiner, N.; Sidhu, T. K.; Frenette, E. C.; Mitchell, K.; Perrin, E. C.

2011-01-01

Clinically significant attention problems among children present a significant obstacle to increasing student achievement. Computer-based attention training holds great promise as a way for schools to address this problem. The aim of this project is to evaluate the efficacy of two computer-based attention training systems in schools. One program…

Problems of older persons using a wheeled walker.

PubMed

Lindemann, Ulrich; Schwenk, Michael; Klenk, Jochen; Kessler, Max; Weyrich, Michael; Kurz, Franziska; Becker, Clemens

2016-04-01

Wheeled walkers (WWs) are used to improve mobility and for fall prevention in older persons, but not all users are satisfied with the usability of WWs. Intelligent WWs are being developed to improve the usability. The aim of this study was to support the development of intelligent WWs by investigating possible problems of using a WW. This study investigated 22 geriatric in-patients (median age 82 years) with and without their WW while opening a door against the direction of walking and passing through. Other possible problems when using WWs were identified by interview. Walking through the door was faster without than with using the WW (8.71 versus 12.86 s, p < 0.001), while interference between door and WW was documented in 41 of 44 (93 %) cases. Backward walking performance was better when using a WW with regard to gait speed, step width and walk ratio (all p < 0.002). Most referred problems when using a WW were walking downhill (83 %) and uphill (77 %) and obstacle crossing in general (77 %). Problems with opening a door against the direction of walking and the optimization of downhill and uphill walking as well as obstacle crossing should be regarded when developing an intelligent WW.

Problem-solving performance and reproductive success of great tits in urban and forest habitats.

PubMed

Preiszner, Bálint; Papp, Sándor; Pipoly, Ivett; Seress, Gábor; Vincze, Ernő; Liker, András; Bókony, Veronika

2017-01-01

Success in problem solving, a form of innovativeness, can help animals exploit their environments, and recent research suggests that it may correlate with reproductive success. Innovativeness has been proposed to be especially beneficial in urbanized habitats, as suggested by superior problem-solving performance of urban individuals in some species. If there is stronger selection for innovativeness in cities than in natural habitats, we expect problem-solving performance to have a greater positive effect on fitness in more urbanized habitats. We tested this idea in great tits (Parus major) breeding at two urban sites and two forests by measuring their problem-solving performance in an obstacle-removal task and a food-acquisition task. Urban pairs were significantly faster problem-solvers in both tasks. Solving speed in the obstacle-removal task was positively correlated with hatching success and the number of fledglings, whereas performance in the food-acquisition task did not correlate with reproductive success. These relationships did not differ between urban and forest habitats. Neophobia, sensitivity to human disturbance, and risk taking in the presence of a predator did not explain the relationships of problem-solving performance either with habitat type or with reproductive success. Our results suggest that the benefit of innovativeness in terms of reproductive success is similar in urban and natural habitats, implying that problem-solving skills may be enhanced in urban populations by some other benefits (e.g. increased survival) or reduced costs (e.g. more opportunities to gain practice with challenging tasks).

Fusing terrain and goals: agent control in urban environments

NASA Astrophysics Data System (ADS)

Kaptan, Varol; Gelenbe, Erol

2006-04-01

The changing face of contemporary military conflicts has forced a major shift of focus in tactical planning and evaluation from the classical Cold War battlefield to an asymmetric guerrilla-type warfare in densely populated urban areas. The new arena of conflict presents unique operational difficulties due to factors like complex mobility restrictions and the necessity to preserve civilian lives and infrastructure. In this paper we present a novel method for autonomous agent control in an urban environment. Our approach is based on fusing terrain information and agent goals for the purpose of transforming the problem of navigation in a complex environment with many obstacles into the easier problem of navigation in a virtual obstacle-free space. The main advantage of our approach is its ability to act as an adapter layer for a number of efficient agent control techniques which normally show poor performance when applied to an environment with many complex obstacles. Because of the very low computational and space complexity at runtime, our method is also particularly well suited for simulation or control of a huge number of agents (military as well as civilian) in a complex urban environment where traditional path-planning may be too expensive or where a just-in-time decision with hard real-time constraints is required.

Improved obstacle avoidance and navigation for an autonomous ground vehicle

NASA Astrophysics Data System (ADS)

Giri, Binod; Cho, Hyunsu; Williams, Benjamin C.; Tann, Hokchhay; Shakya, Bicky; Bharam, Vishal; Ahlgren, David J.

2015-01-01

This paper presents improvements made to the intelligence algorithms employed on Q, an autonomous ground vehicle, for the 2014 Intelligent Ground Vehicle Competition (IGVC). In 2012, the IGVC committee combined the formerly separate autonomous and navigation challenges into a single AUT-NAV challenge. In this new challenge, the vehicle is required to navigate through a grassy obstacle course and stay within the course boundaries (a lane of two white painted lines) that guide it toward a given GPS waypoint. Once the vehicle reaches this waypoint, it enters an open course where it is required to navigate to another GPS waypoint while avoiding obstacles. After reaching the final waypoint, the vehicle is required to traverse another obstacle course before completing the run. Q uses modular parallel software architecture in which image processing, navigation, and sensor control algorithms run concurrently. A tuned navigation algorithm allows Q to smoothly maneuver through obstacle fields. For the 2014 competition, most revisions occurred in the vision system, which detects white lines and informs the navigation component. Barrel obstacles of various colors presented a new challenge for image processing: the previous color plane extraction algorithm would not suffice. To overcome this difficulty, laser range sensor data were overlaid on visual data. Q also participates in the Joint Architecture for Unmanned Systems (JAUS) challenge at IGVC. For 2014, significant updates were implemented: the JAUS component accepted a greater variety of messages and showed better compliance to the JAUS technical standard. With these improvements, Q secured second place in the JAUS competition.

Intelligent walkers for the elderly: performance and safety testing of VA-PAMAID robotic walker.

PubMed

Rentschler, Andrew J; Cooper, Rory A; Blasch, Bruce; Boninger, Michael L

2003-01-01

A walker that could help navigate and avoid collisions with obstacles could help reduce health costs and increase the quality of care and independence of thousands of people. This study evaluated the safety and performance of the Veterans Affairs Personal Adaptive Mobility Aid (VA-PAMAID). We performed engineering tests on the VA-PAMAID to determine safety factors, including stability, energy consumption, fatigue life, and sensor and control malfunctions. The VA-PAMAID traveled 10.9 km on a full charge and avoided obstacles while traveling at a speed of up to 1.2 m/s. No failures occurred during static stability, climatic, or fatigue testing. Some problems were encountered during obstacle climbing and sensor and control testing. The VA-PAMAID has good range, has adequate reaction time, and is structurally sound. Clinical trials are planned to compare the device to other low-technical adaptive mobility devices.

Optimized Diffusion of Run-and-Tumble Particles in Crowded Environments

NASA Astrophysics Data System (ADS)

Bertrand, Thibault; Zhao, Yongfeng; Bénichou, Olivier; Tailleur, Julien; Voituriez, Raphaël

2018-05-01

We study the transport of self-propelled particles in dynamic complex environments. To obtain exact results, we introduce a model of run-and-tumble particles (RTPs) moving in discrete time on a d -dimensional cubic lattice in the presence of diffusing hard-core obstacles. We derive an explicit expression for the diffusivity of the RTP, which is exact in the limit of low density of fixed obstacles. To do so, we introduce a generalization of Kac's theorem on the mean return times of Markov processes, which we expect to be relevant for a large class of lattice gas problems. Our results show the diffusivity of RTPs to be nonmonotonic in the tumbling probability for low enough obstacle mobility. These results prove the potential for the optimization of the transport of RTPs in crowded and disordered environments with applications to motile artificial and biological systems.

Imparting protean behavior to mobile robots accomplishing patrolling tasks in the presence of adversaries.

PubMed

Curiac, Daniel-Ioan; Volosencu, Constantin

2015-10-08

Providing unpredictable trajectories for patrol robots is essential when coping with adversaries. In order to solve this problem we developed an effective approach based on the known protean behavior of individual prey animals-random zig-zag movement. The proposed bio-inspired method modifies the normal robot's path by incorporating sudden and irregular direction changes without jeopardizing the robot's mission. Such a tactic is aimed to confuse the enemy (e.g. a sniper), offering less time to acquire and retain sight alignment and sight picture. This idea is implemented by simulating a series of fictive-temporary obstacles that will randomly appear in the robot's field of view, deceiving the obstacle avoiding mechanism to react. The new general methodology is particularized by using the Arnold's cat map to obtain the timely random appearance and disappearance of the fictive obstacles. The viability of the proposed method is confirmed through an extensive simulation case study.

Infusing Software Assurance Research Techniques into Use

NASA Technical Reports Server (NTRS)

Pressburger, Thomas; DiVito, Ben; Feather, Martin S.; Hinchey, Michael; Markosian, Lawrence; Trevino, Luis C.

2006-01-01

Research in the software engineering community continues to lead to new development techniques that encompass processes, methods and tools. However, a number of obstacles impede their infusion into software development practices. These are the recurring obstacles common to many forms of research. Practitioners cannot readily identify the emerging techniques that may benefit them, and cannot afford to risk time and effort evaluating and trying one out while there remains uncertainty about whether it will work for them. Researchers cannot readily identify the practitioners whose problems would be amenable to their techniques, and, lacking feedback from practical applications, are hard-pressed to gauge the where and in what ways to evolve their techniques to make them more likely to be successful. This paper describes an ongoing effort conducted by a software engineering research infusion team established by NASA s Software Engineering Initiative to overcome these obstacles. .

Stokes paradox in electronic Fermi liquids

NASA Astrophysics Data System (ADS)

Lucas, Andrew

2017-03-01

The Stokes paradox is the statement that in a viscous two-dimensional fluid, the "linear response" problem of fluid flow around an obstacle is ill posed. We present a simple consequence of this paradox in the hydrodynamic regime of a Fermi liquid of electrons in two-dimensional metals. Using hydrodynamics and kinetic theory, we estimate the contribution of a single cylindrical obstacle to the global electrical resistance of a material, within linear response. Momentum relaxation, present in any realistic electron liquid, resolves the classical paradox. Nonetheless, this paradox imprints itself in the resistance, which can be parametrically larger than predicted by Ohmic transport theory. We find a remarkably rich set of behaviors, depending on whether or not the quasiparticle dynamics in the Fermi liquid should be treated as diffusive, hydrodynamic, or ballistic on the length scale of the obstacle. We argue that all three types of behavior are observable in present day experiments.

Inverse obstacle problem for the scalar Helmholtz equation

NASA Astrophysics Data System (ADS)

Crosta, Giovanni F.

1994-07-01

The method presented is aimed at identifying the shape of an axially symmetric, sound soft acoustic scatterer from knowledge of the incident plane wave and of the scattering amplitude. The method relies on the approximate back propagation (ABP) of the estimated far field coefficients to the obstacle boundary and iteratively minimizes a boundary defect, without the addition of any penalty term. The ABP operator owes its structure to the properties of complete families of linearly independent solutions of Helmholtz equation. If the obstacle is known, as it happens in simulations, the theory also provides some independent means of predicting the performance of the ABP method. The ABP algorithm and the related computer code are outlined. Several reconstruction examples are considered, where noise is added to the estimated far field coefficients and other errors are deliberately introduced in the data. Many numerical and graphical results are provided.

The Bicentennial and American History

ERIC Educational Resources Information Center

Westfall, William

1974-01-01

Parochialism and present-mindedness, twin obstacles to a successful Bicentennial in the United States in 1976, are considered as problems that must be solved through understanding of history as an integrated part of our over all cultural identity. (Author/RK)

The Study of Intelligent Vehicle Navigation Path Based on Behavior Coordination of Particle Swarm.

PubMed

Han, Gaining; Fu, Weiping; Wang, Wen

2016-01-01

In the behavior dynamics model, behavior competition leads to the shock problem of the intelligent vehicle navigation path, because of the simultaneous occurrence of the time-variant target behavior and obstacle avoidance behavior. Considering the safety and real-time of intelligent vehicle, the particle swarm optimization (PSO) algorithm is proposed to solve these problems for the optimization of weight coefficients of the heading angle and the path velocity. Firstly, according to the behavior dynamics model, the fitness function is defined concerning the intelligent vehicle driving characteristics, the distance between intelligent vehicle and obstacle, and distance of intelligent vehicle and target. Secondly, behavior coordination parameters that minimize the fitness function are obtained by particle swarm optimization algorithms. Finally, the simulation results show that the optimization method and its fitness function can improve the perturbations of the vehicle planning path and real-time and reliability.

The Study of Intelligent Vehicle Navigation Path Based on Behavior Coordination of Particle Swarm

PubMed Central

Han, Gaining; Fu, Weiping; Wang, Wen

2016-01-01

In the behavior dynamics model, behavior competition leads to the shock problem of the intelligent vehicle navigation path, because of the simultaneous occurrence of the time-variant target behavior and obstacle avoidance behavior. Considering the safety and real-time of intelligent vehicle, the particle swarm optimization (PSO) algorithm is proposed to solve these problems for the optimization of weight coefficients of the heading angle and the path velocity. Firstly, according to the behavior dynamics model, the fitness function is defined concerning the intelligent vehicle driving characteristics, the distance between intelligent vehicle and obstacle, and distance of intelligent vehicle and target. Secondly, behavior coordination parameters that minimize the fitness function are obtained by particle swarm optimization algorithms. Finally, the simulation results show that the optimization method and its fitness function can improve the perturbations of the vehicle planning path and real-time and reliability. PMID:26880881

An Application of Multi-Criteria Shortest Path to a Customizable Hex-Map Environment

DTIC Science & Technology

2015-03-26

forces which could act as intermediate destinations or obstacles to movement through the network. This is similar to a traveling salesman problem ...118 Abstract The shortest path problem of finding the optimal path through a complex network is well-studied in the field of operations research. This...research presents an applica- tion of the shortest path problem to a customizable map with terrain features and enemy engagement risk. The PathFinder

Fuzzy Logic Path Planning System for Collision Avoidance by an Autonomous Rover Vehicle

NASA Technical Reports Server (NTRS)

Murphy, Michael G.

1991-01-01

Systems already developed at JSC have shown the benefits of applying fuzzy logic control theory to space related operations. Four major issues are addressed that are associated with developing an autonomous collision avoidance subsystem within a path planning system designed for application in a remote, hostile environment that does not lend itself well to remote manipulation of the vehicle involved through Earth-based telecommunication. A good focus for this is unmanned exploration of the surface of Mars. The uncertainties involved indicate that robust approaches such as fuzzy logic control are particularly appropriate. The four major issues addressed are: (1) avoidance of a single fuzzy moving obstacle; (2) back off from a dead end in a static obstacle environment; (3) fusion of sensor data to detect obstacles; and (4) options for adaptive learning in a path planning system.

Fast learning method for convolutional neural networks using extreme learning machine and its application to lane detection.

PubMed

Kim, Jihun; Kim, Jonghong; Jang, Gil-Jin; Lee, Minho

2017-03-01

Deep learning has received significant attention recently as a promising solution to many problems in the area of artificial intelligence. Among several deep learning architectures, convolutional neural networks (CNNs) demonstrate superior performance when compared to other machine learning methods in the applications of object detection and recognition. We use a CNN for image enhancement and the detection of driving lanes on motorways. In general, the process of lane detection consists of edge extraction and line detection. A CNN can be used to enhance the input images before lane detection by excluding noise and obstacles that are irrelevant to the edge detection result. However, training conventional CNNs requires considerable computation and a big dataset. Therefore, we suggest a new learning algorithm for CNNs using an extreme learning machine (ELM). The ELM is a fast learning method used to calculate network weights between output and hidden layers in a single iteration and thus, can dramatically reduce learning time while producing accurate results with minimal training data. A conventional ELM can be applied to networks with a single hidden layer; as such, we propose a stacked ELM architecture in the CNN framework. Further, we modify the backpropagation algorithm to find the targets of hidden layers and effectively learn network weights while maintaining performance. Experimental results confirm that the proposed method is effective in reducing learning time and improving performance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of a Guide-Dog Robot: Leading and Recognizing a Visually-Handicapped Person using a LRF

NASA Astrophysics Data System (ADS)

Saegusa, Shozo; Yasuda, Yuya; Uratani, Yoshitaka; Tanaka, Eiichirou; Makino, Toshiaki; Chang, Jen-Yuan (James

A conceptual Guide-Dog Robot prototype to lead and to recognize a visually-handicapped person is developed and discussed in this paper. Key design features of the robot include a movable platform, human-machine interface, and capability of avoiding obstacles. A novel algorithm enabling the robot to recognize its follower's locomotion as well to detect the center of corridor is proposed and implemented in the robot's human-machine interface. It is demonstrated that using the proposed novel leading and detecting algorithm along with a rapid scanning laser range finder (LRF) sensor, the robot is able to successfully and effectively lead a human walking in corridor without running into obstacles such as trash boxes or adjacent walking persons. Position and trajectory of the robot leading a human maneuvering in common corridor environment are measured by an independent LRF observer. The measured data suggest that the proposed algorithms are effective to enable the robot to detect center of the corridor and position of its follower correctly.

Trajectory optimization for lunar soft landing with complex constraints

NASA Astrophysics Data System (ADS)

Chu, Huiping; Ma, Lin; Wang, Kexin; Shao, Zhijiang; Song, Zhengyu

2017-11-01

A unified trajectory optimization framework with initialization strategies is proposed in this paper for lunar soft landing for various missions with specific requirements. Two main missions of interest are Apollo-like Landing from low lunar orbit and Vertical Takeoff Vertical Landing (a promising mobility method) on the lunar surface. The trajectory optimization is characterized by difficulties arising from discontinuous thrust, multi-phase connections, jump of attitude angle, and obstacles avoidance. Here R-function is applied to deal with the discontinuities of thrust, checkpoint constraints are introduced to connect multiple landing phases, attitude angular rate is designed to get rid of radical changes, and safeguards are imposed to avoid collision with obstacles. The resulting dynamic problems are generally with complex constraints. The unified framework based on Gauss Pseudospectral Method (GPM) and Nonlinear Programming (NLP) solver are designed to solve the problems efficiently. Advanced initialization strategies are developed to enhance both the convergence and computation efficiency. Numerical results demonstrate the adaptability of the framework for various landing missions, and the performance of successful solution of difficult dynamic problems.

Small-inclusion asymptotic of misfit functionals for inverse problems in acoustics

NASA Astrophysics Data System (ADS)

Guzina, Bojan B.; Bonnet, Marc

2006-10-01

The aim of this study is an extension and employment of the concept of topological derivative as it pertains to the nucleation of infinitesimal inclusions in a reference (i.e. background) acoustic medium. The developments are motivated by the need to develop a preliminary indicator functional that would aid the solution of inverse scattering problems in terms of a rational initial 'guess' about the geometry and material characteristics of a hidden (finite) obstacle; an information that is often required by iterative minimization algorithms. To this end the customary definition of topological derivative, which quantifies the sensitivity of a given cost functional with respect to the creation of an infinitesimal hole, is adapted to permit the nucleation of a dissimilar acoustic medium. On employing the Green's function for the background domain, computation of topological sensitivity for the three-dimensional Helmholtz equation is reduced to the solution of a reference, Laplace transmission problem. Explicit formulae are given for the nucleating inclusions of spherical and ellipsoidal shapes. For generality the developments are also presented in an alternative, adjoint-field setting that permits nucleation of inclusions in an infinite, semi-infinite or finite background medium. Through numerical examples, it is shown that the featured topological sensitivity could be used, in the context of inverse scattering, as an effective obstacle indicator through an assembly of sampling points where it attains pronounced negative values. On varying a material characteristic (density) of the nucleating obstacle, it is also shown that the proposed methodology can be used as a preparatory tool for both geometric and material identification.

Transformation of scientists and engineers into managers

NASA Technical Reports Server (NTRS)

Bayton, J. A.; Chapman, R. L.

1972-01-01

The purposes of this research were to determine the principal problems and obstacles faced by specialists during the transition period when they are becoming managers, and to discover ways by which their difficulties might be avoided or overcome. It was found that senior management officials are unaware--or tend to ignore the importance--of the transition process and its problems, that little attention has been given to developing management training to overcome transition problems, and that much of the training which is offered is largely irrelevant to these problems.

Obstacles in Using Randomization Tests in Single-Case Experimentation.

ERIC Educational Resources Information Center

Kazdin, Alan E.

1980-01-01

Problems associated with randomization tests in single- case experiments are discussed. This article follows a discussion of randomization tests in single case studies in the same issue of this journal. (See TM 505 799; 505 801).(Author/JKS)

Biosonar navigation above water II: exploiting mirror images.

PubMed

Genzel, Daria; Hoffmann, Susanne; Prosch, Selina; Firzlaff, Uwe; Wiegrebe, Lutz

2015-02-15

As in vision, acoustic signals can be reflected by a smooth surface creating an acoustic mirror image. Water bodies represent the only naturally occurring horizontal and acoustically smooth surfaces. Echolocating bats flying over smooth water bodies encounter echo-acoustic mirror images of objects above the surface. Here, we combined an electrophysiological approach with a behavioral experimental paradigm to investigate whether bats can exploit echo-acoustic mirror images for navigation and how these mirrorlike echo-acoustic cues are encoded in their auditory cortex. In an obstacle-avoidance task where the obstacles could only be detected via their echo-acoustic mirror images, most bats spontaneously exploited these cues for navigation. Sonar ensonifications along the bats' flight path revealed conspicuous changes of the reflection patterns with slightly increased target strengths at relatively long echo delays corresponding to the longer acoustic paths from the mirrored obstacles. Recordings of cortical spatiotemporal response maps (STRMs) describe the tuning of a unit across the dimensions of elevation and time. The majority of cortical single and multiunits showed a special spatiotemporal pattern of excitatory areas in their STRM indicating a preference for echoes with (relative to the setup dimensions) long delays and, interestingly, from low elevations. This neural preference could effectively encode a reflection pattern as it would be perceived by an echolocating bat detecting an object mirrored from below. The current study provides both behavioral and neurophysiological evidence that echo-acoustic mirror images can be exploited by bats for obstacle avoidance. This capability effectively supports echo-acoustic navigation in highly cluttered natural habitats. Copyright © 2015 the American Physiological Society.

Collision recognition and direction changes for small scale fish robots by acceleration sensors

NASA Astrophysics Data System (ADS)

Na, Seung Y.; Shin, Daejung; Kim, Jin Y.; Lee, Bae-Ho

2005-05-01

Typical obstacles are walls, rocks, water plants and other nearby robots for a group of small scale fish robots and submersibles that have been constructed in our lab. Sonar sensors are not employed to make the robot structure simple enough. All of circuits, sensors and processor cards are contained in a box of 9 x 7 x 4 cm dimension except motors, fins and external covers. Therefore, image processing results are applied to avoid collisions. However, it is useful only when the obstacles are located far enough to give images processing time for detecting them. Otherwise, acceleration sensors are used to detect collision immediately after it happens. Two of 2-axes acceleration sensors are employed to measure the three components of collision angles, collision magnitudes, and the angles of robot propulsion. These data are integrated to calculate the amount of propulsion direction change. The angle of a collision incident upon an obstacle is the fundamental value to obtain a direction change needed to design a following path. But there is a significant amount of noise due to a caudal fin motor. Because caudal fin provides the main propulsion for a fish robot, there is a periodic swinging noise at the head of a robot. This noise provides a random acceleration effect on the measured acceleration data at the collision. We propose an algorithm which shows that the MEMS-type accelerometers are very effective to provide information for direction changes in spite of the intrinsic noise after the small scale fish robots have made obstacle collision.

Overcoming obstacles to implementation: addressing political, institutional and behavioral problems in earthquake hazard mitigation policies

NASA Astrophysics Data System (ADS)

Alesch, Daniel J.; Petak, William J.

2002-06-01

This project is aimed at bridging the three planes, from basic research, through enabling processes, to engineered systems. At the basic research plane, we have been working to improve our collective understanding about obstacles to implementing mitigation practices, owner decision processes (in connection with other MCEER projects), and public policy processes. At the level of enabling processes, we have been seeking to develop an understanding of how obstacles to greater mitigation can be overcome by improved policy design and processes. At the engineered systems plane, our work is intended to result in practical guidelines for devising policies and programs with appropriate motivation and incentives for implementing policies and programs once adopted. This phase of the research has been aimed, first, at a thorough, multidisciplinary review of the literature concerning obstacles to implementation. Second, the research has focused on advancing the state of the art by developing means for integrating the insights offered by diverse perspectives on the implementation process from the several social, behavioral, and decision sciences. The research establishes a basis for testing our understanding of these processes in the case of hospital retrofit decisions.

Modal element method for potential flow in non-uniform ducts: Combining closed form analysis with CFD

NASA Technical Reports Server (NTRS)

Baumeister, Kenneth J.; Baumeister, Joseph F.

1994-01-01

An analytical procedure is presented, called the modal element method, that combines numerical grid based algorithms with eigenfunction expansions developed by separation of variables. A modal element method is presented for solving potential flow in a channel with two-dimensional cylindrical like obstacles. The infinite computational region is divided into three subdomains; the bounded finite element domain, which is characterized by the cylindrical obstacle and the surrounding unbounded uniform channel entrance and exit domains. The velocity potential is represented approximately in the grid based domain by a finite element solution and is represented analytically by an eigenfunction expansion in the uniform semi-infinite entrance and exit domains. The calculated flow fields are in excellent agreement with exact analytical solutions. By eliminating the grid surrounding the obstacle, the modal element method reduces the numerical grid size, employs a more precise far field boundary condition, as well as giving theoretical insight to the interaction of the obstacle with the mean flow. Although the analysis focuses on a specific geometry, the formulation is general and can be applied to a variety of problems as seen by a comparison to companion theories in aeroacoustics and electromagnetics.

Differential Impedance Obstacle Detection Sensor (DIOD) - Phase 2

DOT National Transportation Integrated Search

2006-11-01

To minimize excavations and public inconvenience, utilities often use horizontal directional drilling (HDD) to create underground pathways for the installation of pipes, cables, and other utility lines. While HDD provides efficiency improvements over...

Progress Toward Electrostatic Radiation Shielding of Interplanetary Spacecraft: Strategies, Concepts and Technical Challenges of Human Exploration Beyond Low Earth Orbit

NASA Technical Reports Server (NTRS)

Metzger, Philip T.; Lane, John E.; Youngquist, Robert C.

2004-01-01

The radiation problem is a serious obstacle to solar system exploration. Electrostatic shielding was previously dismissed as unworkable. This was based on the false assumption that radial symmetry is needed to provide isotropic protection. KSC recently demonstrated the feasibility of asymmetric, multipole electrostatic shielding. Combined with passive shielding it might solve the radiation problem

Acting out of Habits - Can Theatre of the Oppressed Promote Change? Boal's Theatre Methods in Relation to Bourdieu's Concept of Habitus

ERIC Educational Resources Information Center

Osterlind, Eva

2008-01-01

Habits make everyday life manageable, but can also become obstacles and cause problems. The tendency to repeat old patterns of behavior is a common problem for individuals and for society as a whole. Unreflexive habitual actions constitute an important aspect of social reproduction. In this article, two questions are addressed: Why is change so…

A Study of the Spelling Errors Committed by Students of English in Saudi Arabia: Exploration and Remedial Measures

ERIC Educational Resources Information Center

Hameed, Paikar Fatima Mazhar

2016-01-01

The craziness of English spelling has undeniably perplexed learners, especially in an EFL context as in the Kingdom of Saudi Arabia. In these situations, among other obstacles, learners also have to tackle the perpetual and unavoidable problem of MT interference. Sadly, this perplexity takes the shape of a real problem in the language classroom…

Millimeter-wave data acquisition for terrain mapping, obstacle detection, and dust penetrating capability testing

NASA Astrophysics Data System (ADS)

Schmerwitz, S.; Doehler, H.-U.; Ellis, K.; Jennings, S.

2011-06-01

The DLR project ALLFlight (Assisted Low Level Flight and Landing on Unprepared Landing Sites) is devoted to demonstrating and evaluating the characteristics of sensors for helicopter operations in degraded visual environments. Millimeter wave radar is one of the many sensors considered for use in brown-out. It delivers a lower angular resolution compared to other sensors, however it may provide the best dust penetration capabilities. In cooperation with the NRC, flight tests on a Bell 205 were conducted to gather sensor data from a 35 GHz pencil beam radar for terrain mapping, obstacle detection and dust penetration. In this paper preliminary results from the flight trials at NRC are presented and a description of the radars general capability is shown. Furthermore, insight is provided into the concept of multi-sensor fusion as attempted in the ALLFlight project.

Design and construction of smart cane using infrared laser-based tracking system

NASA Astrophysics Data System (ADS)

Wong, Chi Fung; Phitagragsakul, Narikorn; Jornsamer, Patcharaporn; Kaewmeesri, Pimsin; Jantakot, Pimsunan; Locharoenrat, Kitsakorn

2018-06-01

Our work is aimed to design and construct the smart cane. The infrared laser-based sensor was used as a distance detector and Arduino board was used as a microcontroller. On the other hand, Bluetooth was used as a wireless communicator and MP3 module together with the headset were used as a voice alert player. Our smart cane is a very effective device for the users under the indoor guidance. That is, the obstacle was detectable 3,000 cm away from the blind people. The white cane was assembled with the laser distance sensor and distance alert sensor served as the compact and light-weight device. Distance detection was very fast and precise when the smart cane was tested for the different obstacles, such as human, wall and wooden table under the indoor area.

High sensitive fundus autofluorescence imaging combined with speckle-free optical coherence tomography

NASA Astrophysics Data System (ADS)

Stremplewski, Patrycjusz; Komar, Katarzyna; Szkulmowski, Maciej; Motoczyńska, Marta; Wojtkowski, Maciej

2013-03-01

Scattering and fluorescence images provide complementary information about the health condition of the human eye, so getting them in a single measurement, using a single device may significantly improve a quality of diagnosis as it has been already demonstrated in Spectralis (Heidelberg Eng.) OCT instrument. There is still challenge to improve quality of fundus autofluorescence (FAF) images. The biggest obstacle in obtaining in vivo images of sufficient quality is very low fluorescence signal. For eye safety reasons, and because of patient comfort, using highpower fluorescence excitation is not an adequate solution to the low signal problem. In this contribution we show a new detection method in the retinal autofluorescence imaging, which may improve the sensitivity. We used a fast modulated (up to 500 MHz) diode laser of wavelength 473 nm and detected fluorescence in the spectral range 500-680 nm by photomultiplier and lock-in amplifier. Average power of the collimated blue beam on the cornea used for FAF measurements was set to 50 μW, 10 μW, and even 4.5 μW.

Detecting and monitoring deforestation and forest degradation: Issues and obstacles for Southeast Asia

Treesearch

Douglas Muchoney; Sharon Hamann

2013-01-01

Forest degradation can be defined as the loss of forest volume, biomass and/or forest productivity caused by natural or human influences. Achieving Reduced Emissions from Deforestation and Forest Degradation (REDD+) requires that deforestation and degradation can be efficiently, reliably, and cost-effectively detected and quantified, often where ground and aerial...

Successful School Downsizing.

ERIC Educational Resources Information Center

Raywid, Mary Anne

1997-01-01

Solid research evidence links smaller schools to fewer discipline problems, lower dropout rates, higher student participation levels, and steadier academic progress. Large buildings are no obstacle. Creating small schools requires top administrators to lend impetus and support, facilitate teacher volunteer groups, develop clear policies, adjust…

The MITy micro-rover: Sensing, control, and operation

NASA Technical Reports Server (NTRS)

Malafeew, Eric; Kaliardos, William

1994-01-01

The sensory, control, and operation systems of the 'MITy' Mars micro-rover are discussed. It is shown that the customized sun tracker and laser rangefinder provide internal, autonomous dead reckoning and hazard detection in unstructured environments. The micro-rover consists of three articulated platforms with sensing, processing and payload subsystems connected by a dual spring suspension system. A reactive obstacle avoidance routine makes intelligent use of robot-centered laser information to maneuver through cluttered environments. The hazard sensors include a rangefinder, inclinometers, proximity sensors and collision sensors. A 486/66 laptop computer runs the graphical user interface and programming environment. A graphical window displays robot telemetry in real time and a small TV/VCR is used for real time supervisory control. Guidance, navigation, and control routines work in conjunction with the mapping and obstacle avoidance functions to provide heading and speed commands that maneuver the robot around obstacles and towards the target.

Cooperative Environment Scans Based on a Multi-Robot System

PubMed Central

Kwon, Ji-Wook

2015-01-01

This paper proposes a cooperative environment scan system (CESS) using multiple robots, where each robot has low-cost range finders and low processing power. To organize and maintain the CESS, a base robot monitors the positions of the child robots, controls them, and builds a map of the unknown environment, while the child robots with low performance range finders provide obstacle information. Even though each child robot provides approximated and limited information of the obstacles, CESS replaces the single LRF, which has a high cost, because much of the information is acquired and accumulated by a number of the child robots. Moreover, the proposed CESS extends the measurement boundaries and detects obstacles hidden behind others. To show the performance of the proposed system and compare this with the numerical models of the commercialized 2D and 3D laser scanners, simulation results are included. PMID:25789491

Excitation of Surface Electromagnetic Waves on Railroad Rail

DOT National Transportation Integrated Search

1978-03-31

UMTA's Office of Rail Technology research programs aim to improve urban rail transportation systems safety. This rail-transit research study attempts to develop an onboard, separate and independent obstacle-detection system--Surface Electromagnetic W...

Measures for simulator evaluation of a helicopter obstacle avoidance system

NASA Technical Reports Server (NTRS)

Demaio, Joe; Sharkey, Thomas J.; Kennedy, David; Hughes, Micheal; Meade, Perry

1993-01-01

The U.S. Army Aeroflightdynamics Directorate (AFDD) has developed a high-fidelity, full-mission simulation facility for the demonstration and evaluation of advanced helicopter mission equipment. The Crew Station Research and Development Facility (CSRDF) provides the capability to conduct one- or two-crew full-mission simulations in a state-of-the-art helicopter simulator. The CSRDF provides a realistic, full field-of-regard visual environment with simulation of state-of-the-art weapons, sensors, and flight control systems. We are using the CSRDF to evaluate the ability of an obstacle avoidance system (OASYS) to support low altitude flight in cluttered terrain using night vision goggles (NVG). The OASYS uses a laser radar to locate obstacles to safe flight in the aircraft's flight path. A major concern is the detection of wires, which can be difficult to see with NVG, but other obstacles--such as trees, poles or the ground--are also a concern. The OASYS symbology is presented to the pilot on a head-up display mounted on the NVG (NVG-HUD). The NVG-HUD presents head-stabilized symbology to the pilot while allowing him to view the image intensified, out-the-window scene through the HUD. Since interference with viewing through the display is a major concern, OASYS symbology must be designed to present usable obstacle clearance information with a minimum of clutter.

Design and evaluation of an autonomous, obstacle avoiding, flight control system using visual sensors

NASA Astrophysics Data System (ADS)

Crawford, Bobby Grant

In an effort to field smaller and cheaper Uninhabited Aerial Vehicles (UAVs), the Army has expressed an interest in an ability of the vehicle to autonomously detect and avoid obstacles. Current systems are not suitable for small aircraft. NASA Langley Research Center has developed a vision sensing system that uses small semiconductor cameras. The feasibility of using this sensor for the purpose of autonomous obstacle avoidance by a UAV is the focus of the research presented in this document. The vision sensor characteristics are modeled and incorporated into guidance and control algorithms designed to generate flight commands based on obstacle information received from the sensor. The system is evaluated by simulating the response to these flight commands using a six degree-of-freedom, non-linear simulation of a small, fixed wing UAV. The simulation is written using the MATLAB application and runs on a PC. Simulations were conducted to test the longitudinal and lateral capabilities of the flight control for a range of airspeeds, camera characteristics, and wind speeds. Results indicate that the control system is suitable for obstacle avoiding flight control using the simulated vision system. In addition, a method for designing and evaluating the performance of such a system has been developed that allows the user to easily change component characteristics and evaluate new systems through simulation.

Interns' perceptions on medical ethics education and ethical issues at the Dokuz Eylul University School of Medicine in Turkey.

PubMed

Ozan, S; Timbil, S; Semin, S; Musal, B

2010-11-01

In Turkey and its neighboring countries, few studies have investigated medical students' reactions to ethics education and ethical issues they encounter. The aim of this study was to investigate interns' perceptions of medical ethics education and ethical issues. In students' first three years at the Dokuz Eylul University School of Medicine, various teaching methods are used in ethics education, including problem-based learning, interactive lectures and movies. During the clinical years, the curriculum helps students consider the ethical dimension of their clinical work, and during the internship period a discussion on ethical issues is held. Data were collected through a questionnaire distributed to interns in the 2005-2006 academic year. Its questions asked about interns' perceived adequacy of their ethics education, any interpersonal ethical problems they had witnessed, their approaches to ethical problems, obstacles they believe prevented them from resolving ethical problems and whether they felt themselves ready to deal with ethical problems. 67.2 % of interns were reached and all of them responded. In the assessment of the adequacy of ethics education, the most favorable score was given to educators. Students' most often mentioned ethical problems encountered were between physicians and students and between physicians and patients. Interns believed that difficult personalities on the team and team hierarchy were important obstacles to resolving ethical problems. There were significant differences between the approaches students currently used in dealing with ethical problems and how they anticipated they would approach these problems in their future professional lives. We obtained information about students' perceptions about ethics education and ethical problems which helped us to plan other educational activities. This study may assist other medical schools in preparing an ethics curriculum or help evaluate an existing curriculum.

Analytical Approach to Target Detection and Localization at High-Frequency Bands Using Multipath Propagation

DTIC Science & Technology

2016-04-25

unseen directly by the antennas (both transmitter TX and receiver RX), or out of the Light- Of-Sight ( LOS ) area, as being covered by the obstacles such as...or in other words, out of the Light-Of-Sight ( LOS ) area, as being covered by the obstacles such as walls or buildings. This analysis is verified...that, we put a 1.5m high metallic wall at the distance of 1.5m from the two antennas. It is obviously that the Light Of Sight ( LOS ) is at 2.25m far

Why TQM does not work in Iranian healthcare organisations.

PubMed

Mosadeghrad, Ali Mohammad

2014-01-01

Despite the potential benefits of total quality management (TQM), many healthcare organisations encountered difficulties in its implementation. The purpose of this paper is to explore the barriers to successful implementation of TQM in healthcare organisations of Iran. This study involved a mixed research design. In-depth interviews were conducted with TQM practitioners to explore TQM implementation obstacles in Iranian healthcare organisations. In addition, this study involved survey-based research on the obstacles associated with successful TQM transformation. TQM implementation and its impact depend on the ability of managers to adopt and adapt its values and concepts in professional healthcare organisations. Unsuccessful TQM efforts in Iranian healthcare organisations can be attributed to the non-holistic approach adopted in its implementation, inadequate knowledge of managers' about TQM implementation, frequent top management turnover, poor planning, vague and short-termed improvement goals, lack of consistent managers' and employees' commitment to and involvement in TQM implementation, lack of a corporate quality culture, lack of team orientation, lack of continuous education and training and lack of customer focus. Human resource problems, cultural and strategic problems were the most important obstacles to TQM successful implementation, respectively. Understanding the factors that are likely to obstruct TQM implementation would enable managers to develop more viable strategies for achieving business excellence. Understanding the factors that are likely to obstruct TQM implementation will help organisations in planning better TQM models.

On Algorithms for Nonlinear Minimax and Min-Max-Min Problems and Their Efficiency

DTIC Science & Technology

2011-03-01

dissertation is complete, I can finally stay home after dinner to play Wii with you. LET’S GO Mario and Yellow Mushroom... xv THIS PAGE INTENTIONALLY... balance the accuracy of the approximation with problem ill-conditioning. The sim- plest smoothing algorithm creates an accurate smooth approximating...sizing in electronic circuit boards (Chen & Fan, 1998), obstacle avoidance for robots (Kirjner- Neto & Polak, 1998), optimal design centering

Development of an integrated BEM approach for hot fluid structure interaction

NASA Technical Reports Server (NTRS)

Dargush, G. F.; Banerjee, P. K.

1989-01-01

The progress made toward the development of a boundary element formulation for the study of hot fluid-structure interaction in Earth-to-Orbit engine hot section components is reported. The convective viscous integral formulation was derived and implemented in the general purpose computer program GP-BEST. The new convective kernel functions, in turn, necessitated the development of refined integration techniques. As a result, however, since the physics of the problem is embedded in these kernels, boundary element solutions can now be obtained at very high Reynolds number. Flow around obstacles can be solved approximately with an efficient linearized boundary-only analysis or, more exactly, by including all of the nonlinearities present in the neighborhood of the obstacle. The other major accomplishment was the development of a comprehensive fluid-structure interaction capability within GP-BEST. This new facility is implemented in a completely general manner, so that quite arbitrary geometry, material properties and boundary conditions may be specified. Thus, a single analysis code (GP-BEST) can be used to run structures-only problems, fluids-only problems, or the combined fluid-structure problem. In all three cases, steady or transient conditions can be selected, with or without thermal effects. Nonlinear analyses can be solved via direct iteration or by employing a modified Newton-Raphson approach.

The Creative Business Challenges of Russia.

ERIC Educational Resources Information Center

Whiting, Bruce G.

1993-01-01

The Russian entrepreneur faces major obstacles to any long-term business venture, including hyperinflation, ineffective or missing legal procedures, infrastructure problems, and corruption in government and private sectors. Encouragement of entrepreneurial enterprise formation may help creative Russians help the country find its own prosperity.…

Terrain Perception for DEMO III

NASA Technical Reports Server (NTRS)

Manduchi, R.; Bellutta, P.; Matthies, L.; Owens, K.; Rankin, A.

2000-01-01

The Demo III program has as its primary focus the development of autonomous mobility for a small rugged cross country vehicle. In this paper we report recent progress on both stereo-based obstacle detection and terrain cover color-based classification.

Dynamic path planning for mobile robot based on particle swarm optimization

NASA Astrophysics Data System (ADS)

Wang, Yong; Cai, Feng; Wang, Ying

2017-08-01

In the contemporary, robots are used in many fields, such as cleaning, medical treatment, space exploration, disaster relief and so on. The dynamic path planning of robot without collision is becoming more and more the focus of people's attention. A new method of path planning is proposed in this paper. Firstly, the motion space model of the robot is established by using the MAKLINK graph method. Then the A* algorithm is used to get the shortest path from the start point to the end point. Secondly, this paper proposes an effective method to detect and avoid obstacles. When an obstacle is detected on the shortest path, the robot will choose the nearest safety point to move. Moreover, calculate the next point which is nearest to the target. Finally, the particle swarm optimization algorithm is used to optimize the path. The experimental results can prove that the proposed method is more effective.

Awareness and Detection of Traffic and Obstacles Using Synthetic and Enhanced Vision Systems

NASA Technical Reports Server (NTRS)

Bailey, Randall E.

2012-01-01

Research literature are reviewed and summarized to evaluate the awareness and detection of traffic and obstacles when using Synthetic Vision Systems (SVS) and Enhanced Vision Systems (EVS). The study identifies the critical issues influencing the time required, accuracy, and pilot workload associated with recognizing and reacting to potential collisions or conflicts with other aircraft, vehicles and obstructions during approach, landing, and surface operations. This work considers the effect of head-down display and head-up display implementations of SVS and EVS as well as the influence of single and dual pilot operations. The influences and strategies of adding traffic information and cockpit alerting with SVS and EVS were also included. Based on this review, a knowledge gap assessment was made with recommendations for ground and flight testing to fill these gaps and hence, promote the safe and effective implementation of SVS/EVS technologies for the Next Generation Air Transportation System

The role of tragus on echolocating bat, Eptesicus fuscus

NASA Astrophysics Data System (ADS)

Chiu, Chen; Moss, Cynthia

2005-04-01

Echolocating bats produce ultrasonic vocal signals and utilize the returning echoes to detect, localize and track prey, and also to avoid obstacles. The pinna and tragus, two major components of the bats external ears, play important roles in filtering returning echoes. The tragus is generally believed to play a role in vertical sound localization. The purpose of this study is to further examine how manipulation of the tragus affects a free-flying bat's prey capture and obstacle avoidance behavior. The first part of this study involved a prey capture experiment, and the bat was trained to catch the tethered mealworms in a large room. The second experiment involved obstacle avoidance, and the bat's task was to fly through the largest opening from a horizontal wire array without touching the wires. In both experiments, the bat performed the tasks under three different conditions: with intact tragus, tragus-deflection and recovery from tragus-deflection. Significantly lower performance was observed in both experiments when tragi were glued down. However, the bat adjusted quickly and returned to baseline performance a few days after the manipulation. The results suggest that tragus-deflection does have effects on both the prey capture and obstacle avoidance behavior. [Work supported by NSF.

A detachable electronic device for use with a long white cane to assist with mobility.

PubMed

O'Brien, Emily E; Mohtar, Aaron A; Diment, Laura E; Reynolds, Karen J

2014-01-01

Vision-impaired individuals often use a long white cane to assist them with gathering information about their surroundings. However, these aids are generally not used to detect obstacles above knee height. The purpose of this study is to determine whether a low-cost, custom-built electronic device clipped onto a traditional cane can provide adequate vibratory warning to the user of obstacles above knee height. Sixteen normally sighted blindfolded individuals participated in two mobility courses which they navigated using a normal white cane and a white cane with the electronic device attached. Of the 16 participants, 10 hit fewer obstacles, and 12 covered less ground with the cane when the electronic device was attached. Ten participants found navigating with the electronic device easier than just the white cane alone. However, the time taken on the mobility courses, the number of collisions with obstacles, and the area covered by participants using the electronic device were not significantly different (p > 0.05). A larger sample size is required to determine if the trends found have real significance. It is anticipated that additional information provided by this electronic device about the surroundings would allow users to move more confidently within their environment.

Design and Development of Mopping Robot-'HotBot'

NASA Astrophysics Data System (ADS)

Khan, M. R.; Huq, N. M. L.; Billah, M. M.; Ahmmad, S. M.

2013-12-01

To have a healthy, comfortable, and fresh civilized life we need to do some unhealthy households. Cleaning the dirty floor with a mop is one of the most disgusting and scary house hold jobs. Mopping robots are a solution of such problem. However, these robots are still on the way to be smart enough. Many points limit their efficiency, i.e. cleaning sticky dirt, having dry floor after cleaning, monitoring, cost etc. 'HotBot' is a mopping robot that can clean dirty floor with nice efficiency leaving no sticky dirt. Hot water can be used for heavy stains or normal water for usual situation and economy. It needs neither to be monitored during mopping nor to wipe the floor after it. 'HotBot' has sensors to detect obstacles and a control mechanism to avoid those. Moreover, it cleans sequentially and equipped with several accident-protection-systems. Moreover, it is also cost effective compared to the robots available so far.

Accurate estimation of object location in an image sequence using helicopter flight data

NASA Technical Reports Server (NTRS)

Tang, Yuan-Liang; Kasturi, Rangachar

1994-01-01

In autonomous navigation, it is essential to obtain a three-dimensional (3D) description of the static environment in which the vehicle is traveling. For a rotorcraft conducting low-latitude flight, this description is particularly useful for obstacle detection and avoidance. In this paper, we address the problem of 3D position estimation for static objects from a monocular sequence of images captured from a low-latitude flying helicopter. Since the environment is static, it is well known that the optical flow in the image will produce a radiating pattern from the focus of expansion. We propose a motion analysis system which utilizes the epipolar constraint to accurately estimate 3D positions of scene objects in a real world image sequence taken from a low-altitude flying helicopter. Results show that this approach gives good estimates of object positions near the rotorcraft's intended flight-path.

The NASA Software Research Infusion Initiative: Successful Technology Transfer for Software Assurance

NASA Technical Reports Server (NTRS)

Hinchey, Michael G.; Pressburger, Thomas; Markosian, Lawrence; Feather, Martin S.

2006-01-01

New processes, methods and tools are constantly appearing in the field of software engineering. Many of these augur great potential in improving software development processes, resulting in higher quality software with greater levels of assurance. However, there are a number of obstacles that impede their infusion into software development practices. These are the recurring obstacles common to many forms of research. Practitioners cannot readily identify the emerging techniques that may most benefit them, and cannot afford to risk time and effort in evaluating and experimenting with them while there is still uncertainty about whether they will have payoff in this particular context. Similarly, researchers cannot readily identify those practitioners whose problems would be amenable to their techniques and lack the feedback from practical applications necessary to help them to evolve their techniques to make them more likely to be successful. This paper describes an ongoing effort conducted by a software engineering research infusion team, and the NASA Research Infusion Initiative, established by NASA s Software Engineering Initiative, to overcome these obstacles.

Exact solution for an optimal impermeable parachute problem

NASA Astrophysics Data System (ADS)

Lupu, Mircea; Scheiber, Ernest

2002-10-01

In the paper there are solved direct and inverse boundary problems and analytical solutions are obtained for optimization problems in the case of some nonlinear integral operators. It is modeled the plane potential flow of an inviscid, incompressible and nonlimited fluid jet, witch encounters a symmetrical, curvilinear obstacle--the deflector of maximal drag. There are derived integral singular equations, for direct and inverse problems and the movement in the auxiliary canonical half-plane is obtained. Next, the optimization problem is solved in an analytical manner. The design of the optimal airfoil is performed and finally, numerical computations concerning the drag coefficient and other geometrical and aerodynamical parameters are carried out. This model corresponds to the Helmholtz impermeable parachute problem.

Nature-Inspired Acoustic Sensor Projects

DTIC Science & Technology

1999-08-24

m). The pager motors are worn on the wrists. Yale Intelligent Sensors Lab 8 Autonomous vehicle navigation Yago – Yale Autonomous Go-Cart Yago is used...proximity sensor determined the presence of close-by objects missed by the sonars. Yago operated autonomously by avoiding obstacles. Problems being

UNICEF and the Sudan.

ERIC Educational Resources Information Center

United Nations Children's Fund, Nairobi (Kenya). Eastern Africa Regional Office.

Coupled with poor infrastructure, vast distances, and harsh climatic conditions, the enormous physical obstacles in the Sudan (Africa's largest country) have combined to produce extremely serious problems for Sudanese children, who will soon constitute half of the 17 million people there. This booklet describes continuing projects implemented by…

Top 10: Staying the Course

ERIC Educational Resources Information Center

Kennedy, Mike

2012-01-01

Schools and universities have to confront countless problems that threaten to divert them from their primary function: educating children. Insufficient funding, subpar facilities, lack of community support, dissatisfied employees and dysfunctional board members are just some of the obstacles that can prevent an education institution from achieving…

Putting it All Together: Has One-Stop Shopping Arrived?

ERIC Educational Resources Information Center

Flanagan, Patrick

1997-01-01

Reviews the current state of "one-stop shopping" for telecom services. Discusses regulatory obstacles; administrative problems with single billing; and resistance of telecom providers to change. Concludes that the leading one-stop shopping providers will be individual carriers who offer cost savings. (AEF)

Student Obstacles in Ratio and Proportion Learning

NASA Astrophysics Data System (ADS)

Andini, W.; Jupri, Al

2017-02-01

Ratio and proportion are mathematics topics that are learned in elementary school. In the learning process, teachers often found students who have difficulties in learning these topics. Analysing the difficulties on the topics is important for teachers, as an attempt to doa reflection of the learning process and as a reference in devising a learning plan, including for anticipation of the possibility of these barriers that might appear in the next learning process. This research used as the qualitative method, and involved 49 students of grade 5 and one teacher. From the analysis of the data, i.e., student test results and observation of the learning, we found some obstacles that faced by students, such as students confused in understanding about ratio and proportion topic, students found it difficult in completing the problem which have different contexts, the learning material of ratio and proportion topic that presented in textbooks are still partial (not depth), and the lack of ability of the teacher in creating problems.

E-library Implementation in Library University of Riau

NASA Astrophysics Data System (ADS)

Yuhelmi; Rismayeti

2017-12-01

This research aims to see how the e-book implementation in Library University of Riau and the obstacle in its implementation. In the Globalization era, digital libraries should be developed or else it will decrease the readers’ interest, with the recent advanced technology, digital libraries are one of the learning tools that can be used to finding an information through the internet access, hence digital libraries or commonly known as E-Library is really helping the students and academic community in finding information. The methods that used in this research is Observation, Interview, and Literature Study. The respondents in this research are the staff who involved in the process of digitization in Library University of Riau. The result of this research shows that implementation of e-library in Library University of Riau is already filled the user needs for now, although there is obstacle faced just like technical problems for example the internet connection speed and the technical problem to convert the format from Microsoft Word .doc to Adobe.pdf

Functional Assessment of Problem Behavior: Dispelling Myths, Overcoming Implementation Obstacles, and Developing New Lore

PubMed Central

2012-01-01

Hundreds of studies have shown the efficacy of treatments for problem behavior based on an understanding of its function. Assertions regarding the legitimacy of different types of functional assessment vary substantially across published articles, and best practices regarding the functional assessment process are sometimes difficult to cull from the empirical literature or from published discussions of the behavioral assessment process. A number of myths regarding the functional assessment process, which appear to be pervasive within different behavior-analytic research and practice communities, will be reviewed in the context of an attempt to develop new lore regarding the functional assessment process. Frequently described obstacles to implementing a critical aspect of the functional assessment process, the functional analysis, will be reviewed in the context of solutions for overcoming them. Finally, the aspects of the functional assessment process that should be exported to others versus those features that should remain the sole technological property of behavior analysts will be discussed. PMID:23326630

[Catatonia in childhood and adolescence: obstacles to diagnosis and treatment].

PubMed

Spysschaert, Y; Dhossche, D; Sienaert, P

2016-01-01

Catatonia in children and adolescents is the same as it is for adults; in other words it is a recognisable psychomotor syndrome that follows a characteristic course and responds favourably to treatment with benzodiazepines and/or ect. Therefore, one would not expect to encumber many obstacles to diagnosis and treatment. In fact, the obstacles are fairly numerous. To explore the obstacles that can hinder a simple approach to diagnosis and treatment and to provide support for the clinicians involved. We studied the literature systematically using Limo and keywords. For several decades, particularly in the literature, catatonia was defined as a subtype of schizophrenia. This exclusive link to schizophrenia led to the under-diagnosis of catatonia in patients with other psychiatric conditions and to delays in the administration of the correct treatment. Not only this historical error but also other important problems are complicating the approach to catatonia even today. Among other factors hindering diagnosis and treatment are the belief that catatonia is a rare illness, often denied by family members and some clinicians, the use of neuroleptics and the stigmatisation of benzodiazepines and/or ect. Controversy about catatonia continues. Although diagnosis and treatment are clearly defined, catatonia is still putting professionals to the test. In our essay we offer some practical guidance and advice.

Thorough exploration of complex environments with a space-based potential field

NASA Astrophysics Data System (ADS)

Kenealy, Alina; Primiano, Nicholas; Keyes, Alex; Lyons, Damian M.

2015-01-01

Robotic exploration, for the purposes of search and rescue or explosive device detection, can be improved by using a team of multiple robots. Potential field navigation methods offer natural and efficient distributed exploration algorithms in which team members are mutually repelled to spread out and cover the area efficiently. However, they also suffer from field minima issues. Liu and Lyons proposed a Space-Based Potential Field (SBPF) algorithm that disperses robots efficiently and also ensures they are driven in a distributed fashion to cover complex geometry. In this paper, the approach is modified to handle two problems with the original SBPF method: fast exploration of enclosed spaces, and fast navigation of convex obstacles. Firstly, a "gate-sensing" function was implemented. The function draws the robot to narrow openings, such as doors or corridors that it might otherwise pass by, to ensure every room can be explored. Secondly, an improved obstacle field conveyor belt function was developed which allows the robot to avoid walls and barriers while using their surface as a motion guide to avoid being trapped. Simulation results, where the modified SPBF program controls the MobileSim Pioneer 3-AT simulator program, are presented for a selection of maps that capture difficult to explore geometries. Physical robot results are also presented, where a team of Pioneer 3-AT robots is controlled by the modified SBPF program. Data collected prior to the improvements, new simulation results, and robot experiments are presented as evidence of performance improvements.

Recent developments in the theory of protein folding: searching for the global energy minimum.

PubMed

Scheraga, H A

1996-04-16

Statistical mechanical theories and computer simulation are being used to gain an understanding of the fundamental features of protein folding. A major obstacle in the computation of protein structures is the multiple-minima problem arising from the existence of many local minima in the multidimensional energy landscape of the protein. This problem has been surmounted for small open-chain and cyclic peptides, and for regular-repeating sequences of models of fibrous proteins. Progress is being made in resolving this problem for globular proteins.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klimsiak, Tomasz, E-mail: tomas@mat.umk.pl; Rozkosz, Andrzej, E-mail: rozkosz@mat.umk.pl

In the paper we consider the problem of valuation of American options written on dividend-paying assets whose price dynamics follow the classical multidimensional Black and Scholes model. We provide a general early exercise premium representation formula for options with payoff functions which are convex or satisfy mild regularity assumptions. Examples include index options, spread options, call on max options, put on min options, multiply strike options and power-product options. In the proof of the formula we exploit close connections between the optimal stopping problems associated with valuation of American options, obstacle problems and reflected backward stochastic differential equations.

Impact of pain on recreational activities of nursing home residents.

PubMed

Pickering, G; Deteix, A; Eschalier, A; Dubray, C

2001-02-01

The high prevalence of pain in older adults in nursing homes and long-term care institutions is a challenging problem. Nursing home residents were questioned to evaluate whether pain might be an obstacle to their active participation in recreational activities, especially physical activities. This study shows that the intensity and daily experience of pain are both obstacles to participation in physical activities, especially in the oldest patients. The findings also show that participation is linked to the autonomy of the patient; more information about the benefits of physical activity, and coordinating efforts in this area are needed in order to help the elderly preserve their autonomy and quality of life.

A Cartesian cut cell method for rarefied flow simulations around moving obstacles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dechristé, G., E-mail: Guillaume.Dechriste@math.u-bordeaux1.fr; CNRS, IMB, UMR 5251, F-33400 Talence; Mieussens, L., E-mail: Luc.Mieussens@math.u-bordeaux1.fr

2016-06-01

For accurate simulations of rarefied gas flows around moving obstacles, we propose a cut cell method on Cartesian grids: it allows exact conservation and accurate treatment of boundary conditions. Our approach is designed to treat Cartesian cells and various kinds of cut cells by the same algorithm, with no need to identify the specific shape of each cut cell. This makes the implementation quite simple, and allows a direct extension to 3D problems. Such simulations are also made possible by using an adaptive mesh refinement technique and a hybrid parallel implementation. This is illustrated by several test cases, including amore » 3D unsteady simulation of the Crookes radiometer.« less

Advanced computer graphic techniques for laser range finder (LRF) simulation

NASA Astrophysics Data System (ADS)

Bedkowski, Janusz; Jankowski, Stanislaw

2008-11-01

This paper show an advanced computer graphic techniques for laser range finder (LRF) simulation. The LRF is the common sensor for unmanned ground vehicle, autonomous mobile robot and security applications. The cost of the measurement system is extremely high, therefore the simulation tool is designed. The simulation gives an opportunity to execute algorithm such as the obstacle avoidance[1], slam for robot localization[2], detection of vegetation and water obstacles in surroundings of the robot chassis[3], LRF measurement in crowd of people[1]. The Axis Aligned Bounding Box (AABB) and alternative technique based on CUDA (NVIDIA Compute Unified Device Architecture) is presented.

Actively generated noise liquid flowmeter.

PubMed

Tanisawa, S; Hirose, H; Yoshihisa, N

1994-01-01

A new noise flowmeter with two transducers has been tested experimentally in water. It detects the noises generated by the interaction between artificially introduced air bubbles and a built-in obstacle with a downstream transducer, and differentiates them from the external noises detected by the upstream transducer in a pipe. The system includes processing instrumentation with functions such as averaging and difference-operating for reduction of external noise effects.

Homelessness and Its Effects on Children.

ERIC Educational Resources Information Center

Hart-Shegos, Ellen

Homelessness influences every facet of children's lives, inhibiting their physical, emotional, cognitive, social, and behavioral development. Homeless women face such obstacles to healthy pregnancies as chemical abuse, chronic health problems, and lack of prenatal care. Homeless infants are more likely to have low birth weights and are at greater…

Seeing Red Over Those Black Marks on Your Floors?

ERIC Educational Resources Information Center

Rittner-Heir, Robbin

1999-01-01

Describes one custodian's cost-effective approach for resolving black scuff marks on flooring and staving off their return. An eight-step cleaning program is detailed. Cautions that the largest obstacle to proper handling of floor problems lies in the lack of a proper maintenance schedule. (GR)

Determining the Orbit Locations of Turkish Airborne Early Warning and Control Aircraft Over the Turkish Air Space

DTIC Science & Technology

2009-03-01

and Control (AEW&C) Aircraft. AEW&C aircraft has become vital to detect low altitude threats that a ground RADAR cannot detect because of obstacles...HARM). The concern is to cover and detect the threats as far as possible from Turkey within a risk that the commander accepts. The goal is to help...decision makers decide how many AEW aircraft are needed to obtain full coverage. In order to provide optimum results, a Maximal Coverage Location

Strong Intrinsic Spin Hall Effect in the TaAs Family of Weyl Semimetals

NASA Astrophysics Data System (ADS)

Sun, Yan; Zhang, Yang; Felser, Claudia; Yan, Binghai

2016-09-01

Since their discovery, topological insulators are expected to be ideal spintronic materials owing to the spin currents carried by surface states with spin-momentum locking. However, the bulk doping problem remains an obstacle that hinders such an application. In this work, we predict that a newly discovered family of topological materials, the Weyl semimetals, exhibits a large intrinsic spin Hall effect that can be utilized to generate and detect spin currents. Our ab initio calculations reveal a large spin Hall conductivity in the TaAs family of Weyl materials. Considering the low charge conductivity of semimetals, Weyl semimetals are believed to present a larger spin Hall angle (the ratio of the spin Hall conductivity over the charge conductivity) than that of conventional spin Hall systems such as the 4 d and 5 d transition metals. The spin Hall effect originates intrinsically from the bulk band structure of Weyl semimetals, which exhibit a large Berry curvature and spin-orbit coupling, so the bulk carrier problem in the topological insulators is naturally avoided. Our work not only paves the way for employing Weyl semimetals in spintronics, but also proposes a new guideline for searching for the spin Hall effect in various topological materials.

Challenges Encountered by 17 Autistic Young Adults in Hong Kong

ERIC Educational Resources Information Center

Wong, Shui-wai

2017-01-01

The self-portrayals of 17 young persons with autism spectrum disorder reveal the challenges encountered by them, including study problems, inter-personal relationships, being bullied by classmates at school, discrimination by the public in general and teachers, social workers, and peers in particular, obstacles to post-secondary education,…

Why Animals Run on Legs, Not on Wheels.

ERIC Educational Resources Information Center

Diamond, Jared

1983-01-01

Speculates why animals have not developed wheels in place of inefficient legs. One study cited suggests three reasons why animals are better off without wheels: wheels are efficient only on hard surfaces, limitation of wheeled motion due to vertical obstructions, and the problem of turning in spaces cluttered with obstacles. (JN)

Adolescents' Conscious Processes of Developing Regulation: Learning to Appraise Challenges

ERIC Educational Resources Information Center

Larson, Reed W.

2011-01-01

To understand regulation and agency, it important to consider the nature of the regulatory challenges that adolescents must deal with. These include emotional, motivation, interpersonal, and other obstacles and problems. In this chapter, the author discusses the challenges reported by youth working on arts, technology, and social justice projects…

Implementing Feminist Theory in Engineering: Obstacles within the Gender Studies Tradition

ERIC Educational Resources Information Center

Udén, Maria K.

2017-01-01

Scholars have noted that there is hesitation to utilise findings from gender studies in engineering education. Issues within gender studies may be part of the matching problem. Debates concerning two concepts for new engineering paradigms are investigated: "care" and "heterogeneity." Their appeals and the respective…

Sniffing out the Secret Poison: Selection Bias in Educational Research

ERIC Educational Resources Information Center

Showalter, Daniel A.; Mullet, Luke B.

2017-01-01

Selection bias is a persistent, and often hidden, problem in educational research. It is the primary obstacle standing in between increasingly available large education datasets and the ability to make valid causal inferences to inform policymaking, research, and practice (Stuart, 2010). This article provides an accessible discussion on the…

Symposium Overview: Are We Making the Same Mistake Twice?

ERIC Educational Resources Information Center

Holburn, C. Steve

1992-01-01

This symposium overview briefly summarizes following articles which identify problems in the quality of care provided by Intermediate Care Facilities for the Mentally Retarded (ICF/MR), provide reactions, and identify positive trends. An emphasis on regulations and compliance is thought to be a major obstacle to quality services. (DB)

Managing Diversity in Education: Languages, Policies, Pedagogies

ERIC Educational Resources Information Center

Little, David, Ed.; Leung, Constant, Ed.; Van Avermaet, Piet

2013-01-01

Diversity--social, cultural, linguistic and ethnic--poses a challenge to all educational systems. Some authorities, schools and teachers look upon it as a problem, an obstacle to the achievement of national educational goals, while for others it offers new opportunities. Successive PISA reports have laid bare the relative lack of success in…

The Federal Role in Education Reform.

ERIC Educational Resources Information Center

Allen, James E., Jr.

One principal set of obstacles preventing public education from having shown more progress in realizing the national objective of equal educational opportunity has to do with the way schools are financed. Resolving problems of school finance is, U.S. Commissioner of Education Allen says, an absolute essential in achieving equal opportunity. Some…

Problems of Equity in the Reconstituted Family: A Social Exchange Analysis.

ERIC Educational Resources Information Center

Nelson, Margaret; Nelson, Gordon K.

1982-01-01

Applies social exchange principles to the difficulties of setting up a stepfamily. Discusses obstacles to role adjustment and maintenance of equity among members. Concludes that if the reconstituting family can establish a basis of trust, the stepfamily can merge as a developmental unit toward expansion and commitment. (Author)

Resource Issues: A Case Study from New Orleans.

ERIC Educational Resources Information Center

Garvin, James R.; Young, Alma H.

1993-01-01

One major obstacle to collaboration is perception of value--especially in urban areas where resources are shrinking and social problems are increasing. Sharing of resources is weighted by considerations of proximal benefit and proximal concern. This article shows how a New Orleans full-services school pilot project successfully garnered funding…

Planning for Change in Higher Education.

ERIC Educational Resources Information Center

Ostergren, Bertil

This document, adapted to readers who are not familiar with institutional details in Swedish higher education, outlines planning and management at regional and central levels. Emphasis is placed on qualitative aspects of planning and on identification of obstacles and possibilities of change and innovation. A central problem for the study is to…

Effect of Peer Mentors on Academic Performance

ERIC Educational Resources Information Center

Bonin, Elizabeth

2016-01-01

Undergraduate peer mentoring programs strive to retain students who solve their own problems, develop options, unravel obstacles, and establish a process of figuring out solutions. A crucial component of obtaining that goal is to effectively train peer mentors to serve as advocates to freshman undergraduate students. Terrion and Philion (2008)…

Doing Business in the New Technology: Problems for College and University Counsel.

ERIC Educational Resources Information Center

Toohey, Daniel W.; Gray, Todd D.

1984-01-01

Regulatory changes regarding public broadcasting and telecommunications facilities on college and university campuses allowing remunerative use of the facilities, and potential obstacles to remunerative use posed by state statutes, are discussed from legal and tax perspectives. The potential for double taxation is examined. (MSE)

Imagination Unlimited: A Guide for Creative Problem Solving, Upper Elementary Summer School.

ERIC Educational Resources Information Center

Cleveland Public Schools, OH. Div. of Major Work Classes.

The guide gives procedures for helping gifted upper elementary school students in Major Work classes utilize their imagination. Appropriate literary quotes introduce a discussion on creativity, which involves the imaginative recombination of known ideas into something new. Considered are obstacles that work against creativity such as mental…

Youth Services in Rural Areas: Strategies for Service Delivery.

ERIC Educational Resources Information Center

Schwartz, Charles L.

1982-01-01

Pinpoints several problems in youth services in general and in rural areas in particular. Suggests strategies for overcoming these obstacles: packaging services which meet child's total needs, establishing youth service bureaus to coordinate families and human services resources, and using natural helping networks of the community. (Author/AH)

The Communication Barriers between Teachers and Parents in Primary Schools

ERIC Educational Resources Information Center

Ozmen, Fatma; Akuzum, Cemal; Zincirli, Muhammed; Selcuk, Gulenaz

2016-01-01

Problem Statement: In educational institutions, the effectiveness of communication between teachers and parents, in terms of student achievement and attendance, has a great importance. Parent-teacher communication provides multi-faceted benefits to teachers, the school, and parents as well. However, various obstacles hinder the realization of…

Institutionalization of Rural Credit in India: A Focus on the Cooperative Credit Movement.

DTIC Science & Technology

1980-05-01

Primarily the Government of India has relied on the Cooperative Movement in its effort to institutionalize the supply of rural credit. This thesis...examines some of the major problems and obstacles encountered as well as corrective measures taken with respect to the cooperative movement . (Author)

[A semimicroquality evaluation method on Panax notoginseng and its application in analysis of continuous cropping obstacles research samples].

PubMed

Cao, Yi; Wang, Chao-Qun; Xu, Feng; Jia, Xiu-Hong; Liu, Guang-Xue; Yang, Sheng-Chao; Long, Guang-Qiang; Chen, Zhong-Jian; Wei, Fu-Zhou; Yang, Shao-Zhou; Fukuda, Kozo; Wang, Xuan; Cai, Shao-Qing

2016-10-01

Panax notoginseng is a commonly used traditional Chinese medicine with blood activating effect while has continuous cropping obstacle problem in planting process. In present study, a semimicroextraction method with water-saturated n-butanol on 0.1 g notoginseng sample was established with good repeatability (RSD<2.5%) and 9.6%-20.6% higher extraction efficiency of seven saponins than the conventional method. A total of 16 characteristic peaks were identified by LC-MS-IT-TOF, including eight 20(S)-protopanaxatriol (PPT) type saponins and eight 20(S)-protopanaxadiol (PPD) type saponins. The established method was utilized to evaluate the quality of notoginseng samples cultivated by manual intervened methods to overcome continuous cropping obstacles.As a result, HPLC fingerprint similarity, content of Fa and ratio of notoginsenoside K and notoginsenoside Fa (N-K/Fa) were found out to be as valuatable markers of the quality of samples in continuous cropping obstacle research, of which N-K/Fa could also be applied to the analysis of notoginseng samples with different growth years.Notoginseng samples with continuous cropping obstacle had HPLC fingerprint similarity lower than 0.87, in consistent with normal sample, and had significant lower content of notoginsenoside Fa and significant higher N-K/Fa (2.35-4.74) than normal group (0.45-1.33). All samples in the first group with manual intervention showed high similarity with normal group (>0.87), similar content of common peaks and N-K/Fa (0.42-2.06). The content of notoginsenoside K in the second group with manual intervention was higher than normal group. All samples except two displayed similarity higher than 0.87 and possessed content of 16 saponins close to normal group. The result showed that notoginseng samples with continuous cropping obstacle had lower quality than normal sample. And manual intervened methods could improve their quality in different levels.The method established in this study was simple, fast and accurate, and the markers may provide new guides for quality control in continuous cropping obstacle research of notoginseng. Copyright© by the Chinese Pharmaceutical Association.

Free boundary problems in shock reflection/diffraction and related transonic flow problems

PubMed Central

Chen, Gui-Qiang; Feldman, Mikhail

2015-01-01

Shock waves are steep wavefronts that are fundamental in nature, especially in high-speed fluid flows. When a shock hits an obstacle, or a flying body meets a shock, shock reflection/diffraction phenomena occur. In this paper, we show how several long-standing shock reflection/diffraction problems can be formulated as free boundary problems, discuss some recent progress in developing mathematical ideas, approaches and techniques for solving these problems, and present some further open problems in this direction. In particular, these shock problems include von Neumann's problem for shock reflection–diffraction by two-dimensional wedges with concave corner, Lighthill's problem for shock diffraction by two-dimensional wedges with convex corner, and Prandtl-Meyer's problem for supersonic flow impinging onto solid wedges, which are also fundamental in the mathematical theory of multidimensional conservation laws. PMID:26261363

Sensory Augmentation for Increased Awareness of Driving Environment [2014

DOT National Transportation Integrated Search

2014-12-12

The goal of this project was to detect road boundaries and stationary obstacles on the road using low-cost automotive-grade LiDAR scanners for the purpose of lateral positioning of the vehicle along the road. For autonomous driving, this information ...

ALLFlight: detection of moving objects in IR and ladar images

NASA Astrophysics Data System (ADS)

Doehler, H.-U.; Peinecke, Niklas; Lueken, Thomas; Schmerwitz, Sven

2013-05-01

Supporting a helicopter pilot during landing and takeoff in degraded visual environment (DVE) is one of the challenges within DLR's project ALLFlight (Assisted Low Level Flight and Landing on Unprepared Landing Sites). Different types of sensors (TV, Infrared, mmW radar and laser radar) are mounted onto DLR's research helicopter FHS (flying helicopter simulator) for gathering different sensor data of the surrounding world. A high performance computer cluster architecture acquires and fuses all the information to get one single comprehensive description of the outside situation. While both TV and IR cameras deliver images with frame rates of 25 Hz or 30 Hz, Ladar and mmW radar provide georeferenced sensor data with only 2 Hz or even less. Therefore, it takes several seconds to detect or even track potential moving obstacle candidates in mmW or Ladar sequences. Especially if the helicopter is flying with higher speed, it is very important to minimize the detection time of obstacles in order to initiate a re-planning of the helicopter's mission timely. Applying feature extraction algorithms on IR images in combination with data fusion algorithms of extracted features and Ladar data can decrease the detection time appreciably. Based on real data from flight tests, the paper describes applied feature extraction methods for moving object detection, as well as data fusion techniques for combining features from TV/IR and Ladar data.

A Low Cost Sensors Approach for Accurate Vehicle Localization and Autonomous Driving Application.

PubMed

Vivacqua, Rafael; Vassallo, Raquel; Martins, Felipe

2017-10-16

Autonomous driving in public roads requires precise localization within the range of few centimeters. Even the best current precise localization system based on the Global Navigation Satellite System (GNSS) can not always reach this level of precision, especially in an urban environment, where the signal is disturbed by surrounding buildings and artifacts. Laser range finder and stereo vision have been successfully used for obstacle detection, mapping and localization to solve the autonomous driving problem. Unfortunately, Light Detection and Ranging (LIDARs) are very expensive sensors and stereo vision requires powerful dedicated hardware to process the cameras information. In this context, this article presents a low-cost architecture of sensors and data fusion algorithm capable of autonomous driving in narrow two-way roads. Our approach exploits a combination of a short-range visual lane marking detector and a dead reckoning system to build a long and precise perception of the lane markings in the vehicle's backwards. This information is used to localize the vehicle in a map, that also contains the reference trajectory for autonomous driving. Experimental results show the successful application of the proposed system on a real autonomous driving situation.

A Low Cost Sensors Approach for Accurate Vehicle Localization and Autonomous Driving Application

PubMed Central

Vassallo, Raquel

2017-01-01

Autonomous driving in public roads requires precise localization within the range of few centimeters. Even the best current precise localization system based on the Global Navigation Satellite System (GNSS) can not always reach this level of precision, especially in an urban environment, where the signal is disturbed by surrounding buildings and artifacts. Laser range finder and stereo vision have been successfully used for obstacle detection, mapping and localization to solve the autonomous driving problem. Unfortunately, Light Detection and Ranging (LIDARs) are very expensive sensors and stereo vision requires powerful dedicated hardware to process the cameras information. In this context, this article presents a low-cost architecture of sensors and data fusion algorithm capable of autonomous driving in narrow two-way roads. Our approach exploits a combination of a short-range visual lane marking detector and a dead reckoning system to build a long and precise perception of the lane markings in the vehicle’s backwards. This information is used to localize the vehicle in a map, that also contains the reference trajectory for autonomous driving. Experimental results show the successful application of the proposed system on a real autonomous driving situation. PMID:29035334

eHealth in cardiovascular medicine: A clinical update.

PubMed

Saner, Hugo; van der Velde, Enno

2016-10-01

Demographic changes, progress in medicine technology and regional problems in providing healthcare to low density populations are posing great challenges to our healthcare systems. Rapid progress in computer sciences and information technologies have a great impact on the way healthcare will be delivered in the near future. This article describes opportunities and challenges of eHealth and telemedicine in the framework of our health systems and, in particular, in the context of today's cardiology services. The most promising applications of eHealth and telemedicine include: (a) prevention and lifestyle interventions; (b) chronic disease management including hypertension, diabetes and heart failure; (c) arrhythmia detection including early detection of atrial fibrillation and telemonitoring of devices such as pacemaker, internal cardioverter defibrillators and implantable rhythm monitoring devices; (d) telerehabilitation. Major obstacles to the integration of eHealth and telemedicine into daily clinical practice include limited large-scale evidence, in particular, for cost-effectiveness, as well as lack of interoperability, inadequate or fragmented legal frameworks and lack of reimbursement. An important challenge for those involved in these new technologies will be to keep the main focus on patient's individual needs and to carefully evaluate the evidence behind the practice. © The European Society of Cardiology 2016.

Computational oncology.

PubMed

Lefor, Alan T

2011-08-01

Oncology research has traditionally been conducted using techniques from the biological sciences. The new field of computational oncology has forged a new relationship between the physical sciences and oncology to further advance research. By applying physics and mathematics to oncologic problems, new insights will emerge into the pathogenesis and treatment of malignancies. One major area of investigation in computational oncology centers around the acquisition and analysis of data, using improved computing hardware and software. Large databases of cellular pathways are being analyzed to understand the interrelationship among complex biological processes. Computer-aided detection is being applied to the analysis of routine imaging data including mammography and chest imaging to improve the accuracy and detection rate for population screening. The second major area of investigation uses computers to construct sophisticated mathematical models of individual cancer cells as well as larger systems using partial differential equations. These models are further refined with clinically available information to more accurately reflect living systems. One of the major obstacles in the partnership between physical scientists and the oncology community is communications. Standard ways to convey information must be developed. Future progress in computational oncology will depend on close collaboration between clinicians and investigators to further the understanding of cancer using these new approaches.

A five-week exercise program can reduce falls and improve obstacle avoidance in the elderly.

PubMed

Weerdesteyn, Vivian; Rijken, Hennie; Geurts, Alexander C H; Smits-Engelsman, Bouwien C M; Mulder, Theo; Duysens, Jacques

2006-01-01

Falls in the elderly are a major health problem. Although exercise programs have been shown to reduce the risk of falls, the optimal exercise components, as well as the working mechanisms that underlie the effectiveness of these programs, have not yet been established. To test whether the Nijmegen Falls Prevention Program was effective in reducing falls and improving standing balance, balance confidence, and obstacle avoidance performance in community-dwelling elderly people. A total of 113 elderly with a history of falls participated in this study (exercise group, n = 79; control group, n = 28; dropouts before randomization, n = 6). Exercise sessions were held twice weekly for 5 weeks. Pre- and post-intervention fall monitoring and quantitative motor control assessments were performed. The outcome measures were the number of falls, standing balance and obstacle avoidance performance, and balance confidence scores. The number of falls in the exercise group decreased by 46% (incidence rate ratio (IRR) 0.54, 95% confidence interval (CI) 0.36-0.79) compared to the number of falls during the baseline period and by 46% (IRR 0.54, 95% CI 0.34-0.86) compared to the control group. Obstacle avoidance success rates improved significantly more in the exercise group (on average 12%) compared to the control group (on average 6%). Quiet stance and weight-shifting measures did not show significant effects of exercise. The exercise group also had a 6% increase of balance confidence scores. The Nijmegen Falls Prevention Program was effective in reducing the incidence of falls in otherwise healthy elderly. There was no evidence of improved control of posture as a mechanism underlying this result. In contrast, an obstacle avoidance task indicated that subjects improved their performance. Laboratory obstacle avoidance tests may therefore be better instruments to evaluate future fall prevention studies than posturographic balance assessments. Copyright (c) 2006 S. Karger AG, Basel.

Suboptimal artificial potential function sliding mode control for spacecraft rendezvous with obstacle avoidance

NASA Astrophysics Data System (ADS)

Cao, Lu; Qiao, Dong; Xu, Jingwen

2018-02-01

Sub-Optimal Artificial Potential Function Sliding Mode Control (SOAPF-SMC) is proposed for the guidance and control of spacecraft rendezvous considering the obstacles avoidance, which is derived based on the theories of artificial potential function (APF), sliding mode control (SMC) and state dependent riccati equation (SDRE) technique. This new methodology designs a new improved APF to describe the potential field. It can guarantee the value of potential function converge to zero at the desired state. Moreover, the nonlinear terminal sliding mode is introduced to design the sliding mode surface with the potential gradient of APF, which offer a wide variety of controller design alternatives with fast and finite time convergence. Based on the above design, the optimal control theory (SDRE) is also employed to optimal the shape parameter of APF, in order to add some degree of optimality in reducing energy consumption. The new methodology is applied to spacecraft rendezvous with the obstacles avoidance problem, which is simulated to compare with the traditional artificial potential function sliding mode control (APF-SMC) and SDRE to evaluate the energy consumption and control precision. It is demonstrated that the presented method can avoiding dynamical obstacles whilst satisfying the requirements of autonomous rendezvous. In addition, it can save more energy than the traditional APF-SMC and also have better control accuracy than the SDRE.

Whole arm manipulation planning based on feedback velocity fields and sampling-based techniques.

PubMed

Talaei, B; Abdollahi, F; Talebi, H A; Omidi Karkani, E

2013-09-01

Changing the configuration of a cooperative whole arm manipulator is not easy while enclosing an object. This difficulty is mainly because of risk of jamming caused by kinematic constraints. To reduce this risk, this paper proposes a feedback manipulation planning algorithm that takes grasp kinematics into account. The idea is based on a vector field that imposes perturbation in object motion inducing directions when the movement is considerably along manipulator redundant directions. Obstacle avoidance problem is then considered by combining the algorithm with sampling-based techniques. As experimental results confirm, the proposed algorithm is effective in avoiding jamming as well as obstacles for a 6-DOF dual arm whole arm manipulator. Copyright © 2013 ISA. Published by Elsevier Ltd. All rights reserved.

Contaminated sites: the Canadian situation in an international context.

PubMed

De Sousa, C

2001-06-01

Over the last 2 decades, policy-makers have been giving increasing attention to the remediation and redevelopment of contaminated sites, especially those located in urban areas commonly referred to as brownfields. Traditionally, private developers have tended to ignore these sites on account of a series of obstacles of a structural-political nature, including variability in regulatory processes, lack of information on soil quality, impractical clean up standards, fear of liability, and limited funding resources for clean ups. This paper examines the types of policy-making measures that are currently being taken in Canada to overcome these obstacles, comparing them to those being taken in the US and Europe. It is argued that the contaminated site-related policies and programs employed to overcome each obstacle, both within Canada and internationally, are converging in style and content as governments are becoming more aware of the types of costs and risks they must share in order to solve the problem effectively. It is also argued that this trend is unfolding in a relatively predictable way, and that policy-making in Canada is evolving more slowly than it is in the other jurisdictions examined.

Free-Standing Canes.

ERIC Educational Resources Information Center

Ehresman, Paul

1995-01-01

A precane device, called the "free-standing cane," was developed to help children with blindness along with other disabilities. The cane detects obstacles; guides the user's hands into a relaxed, static position in front of the hips; facilitates postural security and control; and offers tactile and kinesthetic feedback. (JDD)

Three-camera stereo vision for intelligent transportation systems

NASA Astrophysics Data System (ADS)

Bergendahl, Jason; Masaki, Ichiro; Horn, Berthold K. P.

1997-02-01

A major obstacle in the application of stereo vision to intelligent transportation system is high computational cost. In this paper, a PC based three-camera stereo vision system constructed with off-the-shelf components is described. The system serves as a tool for developing and testing robust algorithms which approach real-time performance. We present an edge based, subpixel stereo algorithm which is adapted to permit accurate distance measurements to objects in the field of view using a compact camera assembly. Once computed, the 3D scene information may be directly applied to a number of in-vehicle applications, such as adaptive cruise control, obstacle detection, and lane tracking. Moreover, since the largest computational costs is incurred in generating the 3D scene information, multiple applications that leverage this information can be implemented in a single system with minimal cost. On-road applications, such as vehicle counting and incident detection, are also possible. Preliminary in-vehicle road trial results are presented.

A Novel Methodology for Charging Station Deployment

NASA Astrophysics Data System (ADS)

Sun, Zhonghao; Zhao, Yunwei; He, Yueying; Li, Mingzhe

2018-02-01

Lack of charging stations has been a main obstacle to the promotion of electric vehicles. This paper studies deploying charging stations in traffic networks considering grid constraints to balance the charging demand and grid stability. First, we propose a statistical model for charging demand. Then we combine the charging demand model with power grid constraints and give the formulation of the charging station deployment problem. Finally, we propose a theoretical solution for the problem by transforming it to a Markov Decision Process.

Evolutionary variational-hemivariational inequalities

NASA Astrophysics Data System (ADS)

Carl, Siegfried; Le, Vy K.; Motreanu, Dumitru

2008-09-01

We consider an evolutionary quasilinear hemivariational inequality under constraints represented by some closed and convex subset. Our main goal is to systematically develop the method of sub-supersolution on the basis of which we then prove existence, comparison, compactness and extremality results. The obtained results are applied to a general obstacle problem. We improve the corresponding results in the recent monograph [S. Carl, V.K. Le, DE Motreanu, Nonsmooth Variational Problems and Their Inequalities. Comparison Principles and Applications, Springer Monogr. Math., Springer, New York, 2007].

Non linear predictive control of a LEGO mobile robot

NASA Astrophysics Data System (ADS)

Merabti, H.; Bouchemal, B.; Belarbi, K.; Boucherma, D.; Amouri, A.

2014-10-01

Metaheuristics are general purpose heuristics which have shown a great potential for the solution of difficult optimization problems. In this work, we apply the meta heuristic, namely particle swarm optimization, PSO, for the solution of the optimization problem arising in NLMPC. This algorithm is easy to code and may be considered as alternatives for the more classical solution procedures. The PSO- NLMPC is applied to control a mobile robot for the tracking trajectory and obstacles avoidance. Experimental results show the strength of this approach.

Fuzzy spaces topology change as a possible solution to the black hole information loss paradox

NASA Astrophysics Data System (ADS)

Silva, C. A. S.

2009-06-01

The black hole information loss paradox is one of the most intricate problems in modern theoretical physics. A proposal to solve this is one related with topology change. However it has found some obstacles related to unitarity and cluster decomposition (locality). In this Letter we argue that modelling the black hole's event horizon as a noncommutative manifold - the fuzzy sphere - we can solve the problems with topology change, getting a possible solution to the black hole information loss paradox.

Software handlers for process interfaces

NASA Technical Reports Server (NTRS)

Bercaw, R. W.

1976-01-01

Process interfaces are developed in an effort to reduce the time, effort, and money required to install computer systems. Probably the chief obstacle to the achievement of these goals lies in the problem of developing software handlers having the same degree of generality and modularity as the hardware. The problem of combining the advantages of modular instrumentation with those of modern multitask operating systems has not been completely solved, but there are a number of promising developments. The essential principles involved are considered.

The transport of vorticity through fluids in turbulent motion : in the light of the Prandtl and Taylor theories

NASA Technical Reports Server (NTRS)

Ferrari, C

1936-01-01

The report studies the problem of the transport of vorticity or of momentum in light of the Taylor and Prandtl theories which are briefly reviewed. It also show how the formulas of Prandtl could be brought into agreement with experimental results in those cases where they agree with the principle of statistic similitude of Karman, and particularly in the problem of the distribution of velocity and temperature in the wake of a heated cylindrical obstacle.

Mechanical obstacles to the movement of continent-bearing plates

NASA Technical Reports Server (NTRS)

Lowman, P. D., Jr.

1985-01-01

Selected geophysical problems associated with the concept of continental drift as an incidental corollary of plate movement are discussed. The problems include the absence of a suitable plate-driving mechanism for plates with continental leading edges, the absence of the low-velocity zone under shields, and continental roots of 400 to 700 km depths. It is shown that if continental drift occurs, it must use mechanisms not now understood, or that it may not occur at all, plate movement being confined to ocean basins.

Performance testing of collision-avoidance system for power wheelchairs.

PubMed

Lopresti, Edmund F; Sharma, Vinod; Simpson, Richard C; Mostowy, L Casimir

2011-01-01

The Drive-Safe System (DSS) is a collision-avoidance system for power wheelchairs designed to support people with mobility impairments who also have visual, upper-limb, or cognitive impairments. The DSS uses a distributed approach to provide an add-on, shared-control, navigation-assistance solution. In this project, the DSS was tested for engineering goals such as sensor coverage, maximum safe speed, maximum detection distance, and power consumption while the wheelchair was stationary or driven by an investigator. Results indicate that the DSS provided uniform, reliable sensor coverage around the wheelchair; detected obstacles as small as 3.2 mm at distances of at least 1.6 m; and attained a maximum safe speed of 4.2 km/h. The DSS can drive reliably as close as 15.2 cm from a wall, traverse doorways as narrow as 81.3 cm without interrupting forward movement, and reduce wheelchair battery life by only 3%. These results have implications for a practical system to support safe, independent mobility for veterans who acquire multiple disabilities during Active Duty or later in life. These tests indicate that a system utilizing relatively low cost ultrasound, infrared, and force sensors can effectively detect obstacles in the vicinity of a wheelchair.

Physical therapists' perceptions about patients with incomplete post-traumatic paraplegia adherence to recommended home exercises: a qualitative study.

PubMed

Serpanou, Ismini; Sakellari, Evanthia; Psychogiou, Maria; Zyga, Sofia; Sapountzi-Krepia, Despina

2018-06-08

The overall purpose of physical therapy for patients with spinal cord injury is to improve health-related quality of life. However, poor adherence is a problem in physical therapy and may have negative impact on outcomes. To explore the physical therapists' perspectives about patients with incomplete post-traumatic paraplegia adherence to recommended home exercises. A qualitative content analysis was conducted. Data were collected in a convenience sample using semi-structured interviews. Thirteen registered physical therapists in Athens area participated in the study. Five categories emerged from the data: (1) reasons to recommend home exercise by the physical therapist; (2) obstacles to recommend home exercise by the physical therapist; (3) methods addressing these obstacles; (4) the family's role in the adherence to recommended home exercise; and (5) the impact of financial crisis in adherence to recommended home exercise. All participants found the recommended home exercises essential to rehabilitation and health maintenance, and they value their benefits. They also expressed the obstacles that need to be faced during rehabilitation process in order to promote adherence. Physical therapists should take into account the different obstacles that may prevent patients with incomplete post-traumatic paraplegia adherence to recommended home exercises. These involve the patients and their families, while, financial crisis has also an impact in adherence. In order to overcome these obstacles and increase adherence, communication with patient and family while taking into account the individual's needs, capacities, and resources are essential. Copyright © 2018 Associação Brasileira de Pesquisa e Pós-Graduação em Fisioterapia. Publicado por Elsevier Editora Ltda. All rights reserved.

Modality-specific, multitask locomotor deficits persist despite good recovery after a traumatic brain injury.

PubMed

McFadyen, Bradford J; Cantin, Jean-François; Swaine, Bonnie; Duchesneau, Guylaine; Doyon, Julien; Dumas, Denyse; Fait, Philippe

2009-09-01

To study the effects of sensory modality of simultaneous tasks during walking with and without obstacles after moderate to severe traumatic brain injury (TBI). Group comparison study. Gait analysis laboratory within a postacute rehabilitation facility. Volunteer sample (N=18). Persons with moderate to severe TBI (n=11) (9 men, 3 women; age, 37.56+/-13.79 y) and a comparison group (n=7) of subjects without neurologic problems matched on average for body mass index and age (4 men, 3 women; age, 39.19+/-17.35 y). Not applicable. Magnitudes and variability for walking speeds, foot clearance margins (ratio of foot clearance distance to obstacle height), and response reaction times (both direct and as a relative cost because of obstacle avoidance). The TBI group had well-recovered walking speeds and a general ability to avoid obstacles. However, these subjects did show lower trail limb toe clearances (P=.003) across all conditions. Response reaction times to the Stroop tasks were longer in general for the TBI group (P=.017), and this group showed significant increases in response reaction times for the visual modality within the more challenging obstacle avoidance task that was not observed for control subjects. A measure of multitask costs related to differences in response reaction times between obstructed and unobstructed trials also only showed increased attention costs for the visual over the auditory stimuli for the TBI group (P=.002). Mobility is a complex construct, and the present results provide preliminary findings that, even after good locomotor recovery, subjects with moderate to severe TBI show residual locomotor deficits in multitasking. Furthermore, our results suggest that sensory modality is important, and greater multitask costs occur during sensory competition (ie, visual interference).

Supersonic flows past an obstacle in Yukawa liquids

NASA Astrophysics Data System (ADS)

Charan, Harish; Ganesh, Rajaraman

2018-04-01

Shock formation, when a supersonic flow passes a stationary obstacle, is ubiquitous in nature. Considering particles mediating via a Yukawa-type interaction as a prototype for a strongly coupled complex plasma, characterized by coupling strength (Γ, ratio of the average potential to kinetic energy per particle) and screening parameter (κ, ratio of the mean inter-particle distance to the shielding length), we address the fundamental problem of supersonic fluid flow U0, past a stationary obstacle immersed in this strongly coupled system. We here report the results on the bow shocks formed in Yukawa liquids when the liquid flows at speeds larger than the speed of sound in the system. Depending on the values of Mach number MC L=U/0 CL , where CL is the longitudinal speed of sound in the system, the bow shocks are found to be either traveling or localized. We find that for the transonic flows (0.8 ≲ MC L≲ 1.2), the bow shocks travel in the upstream direction opposite to the incoming fluid. The phase velocity of the traveling bow shocks is found to be a non-monotonous function of κ, varying as ∝1 /k1.11 at a fixed value of Γ, and is found to be independent of Γ at a fixed value of κ. It is observed that for the flow values with MC L>1.5 , the shock waves do not travel in the upstream direction but instead form a stationary arc like structure around the obstacle. For the fluid flows with 1 ≲ MC L≲ 2.6 , secondary bow shocks are seen to emerge behind the stationary obstacle which travel in the downstream direction, and the phase velocity of these secondary bow shocks is found to be equal to that of the primary bow shocks.

Esthetic Education of Children with Special Needs by Means of Computer Art

ERIC Educational Resources Information Center

Salakhov, Rasykh F.; Salakhova, Rada I.; Nasibullov, Ramis R.

2016-01-01

Thematic justification of the problem under study: growth of social stratification in the present context of social and economic transformations and emerging forms of social inequality, which is creating serious obstacles for the younger generation's social adaptation, specifically among those social groups that are dealing with difficulties due…

Creating Valuable Class Web Sites

ERIC Educational Resources Information Center

Baker, Elizabeth A.

2008-01-01

Even those teachers with the best intentions of taking advantage of the Internet to support learning may have obstacles before them. In researching the problem, the author has heard their complaints and understands some of the difficulties. However, creating a classroom Web site is not as difficult as one might think. In this article, the author…

The Necessity of ASEAN Community in Producing Pilots

ERIC Educational Resources Information Center

Saowaros, Thanoo; Puncreobutr, Vichian

2016-01-01

The main objectives of this study are to identify the reasons for the shortage of pilots; the necessity of producing Pilots and the obstacles and problems faced by ASEAN Community in producing pilots. The study is conducted by official documents, observations, in-depth interview from personnel who are working for Airports Authority of Thailand,…

A Strategy for Program Evaluation.

ERIC Educational Resources Information Center

Leinhardt, Gaea

This paper proposes a strategy for in-house evaluations in the context of an educational research and development facility. The obstacles in conducting an evaluation of colleagues' programs are discussed; these fall into two categories. First, there is a set of problems that relate to conflicts inherent in judging the work of a colleague without…

Children at Risk: The Work of the States.

ERIC Educational Resources Information Center

Council of Chief State School Officers, Washington, DC.

This study of at-risk youth and children highlights the states' interest in this problem, sparked by changing demographies, new state educational reform policies, the concerns of business and industry, and increasing national awareness. The nature of at-risk youth is examined and the obstacles to meeting their needs are discussed. Findings are…

The Counterproductive Effects of Helicopter Universities

ERIC Educational Resources Information Center

Von Bergen, C. W.; Bressler, Martin S.

2017-01-01

Perhaps universities have gone too far in their attempts to provide the best learning experience for our students? We have heard of helicopter parents who hover over their sons and daughters, removing all obstacles their student might face and solve problems for them. Have colleges and universities adopted this same kind of behavior in their…

Software Process Improvement through the Removal of Project-Level Knowledge Flow Obstacles: The Perceptions of Software Engineers

ERIC Educational Resources Information Center

Mitchell, Susan Marie

2012-01-01

Uncontrollable costs, schedule overruns, and poor end product quality continue to plague the software engineering field. Innovations formulated with the expectation to minimize or eliminate cost, schedule, and quality problems have generally fallen into one of three categories: programming paradigms, software tools, and software process…

The Renewed Community; Pursuing Quality in an Urbanizing Society.

ERIC Educational Resources Information Center

Buck, Roy C., Ed.; Lyons, William E., Ed.

Numerous readings on the urbanizing society are presented, with guidelines for study and discussion, session by session. The first three sessions cover community development as a point of view and problems of a changing economic base--fixed human and nonhuman assets as aids and obstacles, and a realistic policy of industrial development. Two…

Direct Perception of Action-Scaled Affordances: The Shrinking Gap Problem

ERIC Educational Resources Information Center

Fajen, Brett R.; Matthis, Jonathan S.

2011-01-01

The aim of this study was to investigate the perception of possibilities for action (i.e., affordances) that depend on one's movement capabilities, and more specifically, the passability of a shrinking gap between converging obstacles. We introduce a new optical invariant that specifies in intrinsic units the minimum locomotor speed needed to…

Early Childhood Special Education for the Hearing Handicapped. Occasional Paper #13.

ERIC Educational Resources Information Center

Moores, Donald F.

The author reviews studies and programs in consideration of problems and issues professionals face in the early education of aurally handicapped children. Language handicaps as an obstacle to development of the child's academic, intellectual, and social potential are examined; as is parental need for supportive guidance. Discussed are studies…

How Students Solve Problems in Spatial Geometry while Using a Software Application for Visualizing 3D Geometric Objects

ERIC Educational Resources Information Center

Widder, Mirela; Gorsky, Paul

2013-01-01

In schools, learning spatial geometry is usually dependent upon a student's ability to visualize three dimensional geometric configurations from two dimensional drawings. Such a process, however, often creates visual obstacles which are unique to spatial geometry. Useful software programs which realistically depict three dimensional geometric…

A study of logging residue at woods landings in Appalachia

Treesearch

Curtis D. Goho

1976-01-01

A study of residue on five woods landings in West Virginia showed that short lengths, poor quality, and low volumes are obstacles to utilization of this material. Short lengths and dirt accumulation would also pose serious problems for conversion to chips. Some local use for firewood and specialty products is possible.

Eight Questions Employers Ask About Hiring the Mentally Restored.

ERIC Educational Resources Information Center

National Inst. of Mental Health (DHHS), Bethesda, MD.

Perhaps two million or more people in the United States have experienced mental or emotional problems, have been treated and returned to the community, and want their lives to be as normal as possible. Unfortunately, these people often face insurmountable obstacles in finding a job, largely because of public and employer ignorance or prejudice…

Classroom Silence: Voices from Japanese EFL Learners

ERIC Educational Resources Information Center

Harumi, Seiko

2011-01-01

This article explores Japanese EFL learners' classroom silence in a Japanese EFL context. The existence of silence in second language learning contexts can be a source of conflict between students and teachers and even among students themselves. It can also be an obstacle to acquiring the target language. In order to tackle this problem and to…

Skilled and Ready: What Combined Authorities Want from Schools

ERIC Educational Resources Information Center

Hatcher, Richard

2016-01-01

The purpose of combined authorities, driven by government, is economic growth and public sector reform. Economic growth requires improved productivity. The main obstacle, it is claimed, is a "skills deficit," which schools need to address. In this article the evidence for this claim is examined. The real problem, it is argued, is a…

Accessing Geospatial Services in Limited Bandwidth Service-Oriented Architecture (SOA) Environments

ERIC Educational Resources Information Center

Boggs, James D.

2013-01-01

First responders are continuously moving at an incident site and this movement requires them to access Service-Oriented Architecture services, such as a Web Map Service, via mobile wireless networks. First responders from inside a building often have problems in communicating to devices outside that building due to propagation obstacles. Dynamic…

Plants of the Caloosa Experimental Range

Treesearch

J.B. Hilmon

1964-01-01

The vegetation of southern Florida is poorly described in the literature, and the taxonomy and ecology of the pine-wiregrass type especially has been neglected by plant scientists. These deficiencies in plant knowledge were a serious obstacle when research commenced in 1956 on problems of grazing cutover pine flatwoods at the Caloosa Experimental Range. Since then,...

Meeting the Challenge of Rural Pre-K. Federal Policy Series

ERIC Educational Resources Information Center

Smith, Matthew; Patterson, Kathy; Doggett, Libby

2008-01-01

Rural communities face significant obstacles in providing access to the high-quality pre-k programs needed to help mitigate these problems. In addition to limited local tax revenues, many rural areas experience high rates of poverty and a scarcity of qualified teachers. Given these and other challenges, federal investments may be necessary in…

Seeking a rapprochement between anthropology and the cognitive sciences: a problem-driven approach.

PubMed

Whitehouse, Harvey; Cohen, Emma

2012-07-01

Beller, Bender, and Medin question the necessity of including social anthropology within the cognitive sciences. We argue that there is great scope for fruitful rapprochement while agreeing that there are obstacles (even if we might wish to debate some of those specifically identified by Beller and colleagues). We frame the general problem differently, however: not in terms of the problem of reconciling disciplines and research cultures, but rather in terms of the prospects for collaborative deployment of expertise (methodological and theoretical) in problem-driven research. For the purposes of illustration, our focus in this article is on the evolution of cooperation. Copyright © 2012 Cognitive Science Society, Inc.

A Depth-Based Head-Mounted Visual Display to Aid Navigation in Partially Sighted Individuals

PubMed Central

Hicks, Stephen L.; Wilson, Iain; Muhammed, Louwai; Worsfold, John; Downes, Susan M.; Kennard, Christopher

2013-01-01

Independent navigation for blind individuals can be extremely difficult due to the inability to recognise and avoid obstacles. Assistive techniques such as white canes, guide dogs, and sensory substitution provide a degree of situational awareness by relying on touch or hearing but as yet there are no techniques that attempt to make use of any residual vision that the individual is likely to retain. Residual vision can restricted to the awareness of the orientation of a light source, and hence any information presented on a wearable display would have to limited and unambiguous. For improved situational awareness, i.e. for the detection of obstacles, displaying the size and position of nearby objects, rather than including finer surface details may be sufficient. To test whether a depth-based display could be used to navigate a small obstacle course, we built a real-time head-mounted display with a depth camera and software to detect the distance to nearby objects. Distance was represented as brightness on a low-resolution display positioned close to the eyes without the benefit focussing optics. A set of sighted participants were monitored as they learned to use this display to navigate the course. All were able to do so, and time and velocity rapidly improved with practise with no increase in the number of collisions. In a second experiment a cohort of severely sight-impaired individuals of varying aetiologies performed a search task using a similar low-resolution head-mounted display. The majority of participants were able to use the display to respond to objects in their central and peripheral fields at a similar rate to sighted controls. We conclude that the skill to use a depth-based display for obstacle avoidance can be rapidly acquired and the simplified nature of the display may appropriate for the development of an aid for sight-impaired individuals. PMID:23844067

Rattling Nucleons: New Developments in Active Interrogation of Special Nuclear Material

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert C. Runkle; David L. Chichester; Scott J. Thompson

2012-01-01

Active interrogation is a vigorous area of research and development due to its promise of offering detection and characterization capabilities of special nuclear material in environments where passive detection fails. The primary value added by active methods is the capability to penetrate shielding - special nuclear material itself, incidental materials, or intentional shielding - and advocates hope that active interrogation will provide a solution to the problem of detecting shielded uranium, which is at present the greatest obstacle to interdiction efforts. The technique also provides a unique benefit for quantifying nuclear material in high background-radiation environments, an area important formore » nuclear material safeguards and material accountancy. Progress has been made in the field of active interrogation on several fronts, most notably in the arenas of source development, systems integration, and the integration and exploitation of multiple fission and non-fission signatures. But penetration of interrogating radiation often comes at a cost, not only in terms of finance and dose but also in terms of induced backgrounds, system complexity, and extended measurement times (including set up and acquisition). These costs make the calculus for deciding to implement active interrogation more subtle than may be apparent. The purpose of this review is thus to examine existing interrogation methods, compare and contrast their attributes and limitations, and identify missions where active interrogation may hold the most promise.« less

Folic acid functionalized surface highlights 5-methylcytosine-genomic content within circulating tumor cells.

PubMed

Malara, Natalia; Coluccio, Maria Laura; Limongi, Tania; Asande, Monica; Trunzo, Valentina; Cojoc, Gheorghe; Raso, Cinzia; Candeloro, Patrizio; Perozziello, Gerardo; Raimondo, Raffaella; De Vitis, Stefania; Roveda, Laura; Renne, Maria; Prati, Ubaldo; Mollace, Vincenzo; Di Fabrizio, Enzo

2014-11-12

Although the detection of methylated cell free DNA represents one of the most promising approaches for relapse risk assessment in cancer patients, the low concentration of cell-free circulating DNA constitutes the biggest obstacle in the development of DNA methylation-based biomarkers from blood. This paper describes a method for the measurement of genomic methylation content directly on circulating tumor cells (CTC), which could be used to deceive the aforementioned problem. Since CTC are disease related blood-based biomarkers, they result essential to monitor tumor's stadiation, therapy, and early relapsing lesions. Within surface's bio-functionalization and cell's isolation procedure standardization, the presented approach reveals a singular ability to detect high 5-methylcytosine CTC-subset content in the whole CTC compound, by choosing folic acid (FA) as transducer molecule. Sensitivity and specificity, calculated for FA functionalized surface (FA-surface), result respectively on about 83% and 60%. FA-surface, allowing the detection and characterization of early metastatic dissemination, provides a unique advance in the comprehension of tumors progression and dissemination confirming the presence of CTC and its association with high risk of relapse. This functionalized surface identifying and quantifying high 5-methylcytosine CTC-subset content into the patient's blood lead significant progress in cancer risk assessment, also providing a novel therapeutic strategy. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Rattling nucleons: New developments in active interrogation of special nuclear material

NASA Astrophysics Data System (ADS)

Runkle, Robert C.; Chichester, David L.; Thompson, Scott J.

2012-01-01

Active interrogation is a vigorous area of research and development due to its promise of offering detection and characterization capabilities of special nuclear material in environments where passive detection fails. The primary value added by active methods is the capability to penetrate shielding—special nuclear material itself, incidental materials, or intentional shielding—and advocates hope that active interrogation will provide a solution to the problem of detecting shielded uranium, which is at present the greatest obstacle to interdiction efforts. The technique also provides a unique benefit for quantifying nuclear material in high background-radiation environments, an area important for nuclear material safeguards and material accountancy. Progress has been made in the field of active interrogation on several fronts, most notably in the arenas of source development, systems integration, and the integration and exploitation of multiple fission and non-fission signatures. But penetration of interrogating radiation often comes at a cost, not only in terms of finance and dose but also in terms of induced backgrounds, system complexity, and extended measurement times (including set up and acquisition). These costs make the calculus for deciding to implement active interrogation more subtle than may be apparent. The purpose of this review is thus to examine existing interrogation methods, compare and contrast their attributes and limitations, and identify missions where active interrogation may hold the most promise.

Comparative evaluation of support vector machine classification for computer aided detection of breast masses in mammography

NASA Astrophysics Data System (ADS)

Lesniak, J. M.; Hupse, R.; Blanc, R.; Karssemeijer, N.; Székely, G.

2012-08-01

False positive (FP) marks represent an obstacle for effective use of computer-aided detection (CADe) of breast masses in mammography. Typically, the problem can be approached either by developing more discriminative features or by employing different classifier designs. In this paper, the usage of support vector machine (SVM) classification for FP reduction in CADe is investigated, presenting a systematic quantitative evaluation against neural networks, k-nearest neighbor classification, linear discriminant analysis and random forests. A large database of 2516 film mammography examinations and 73 input features was used to train the classifiers and evaluate for their performance on correctly diagnosed exams as well as false negatives. Further, classifier robustness was investigated using varying training data and feature sets as input. The evaluation was based on the mean exam sensitivity in 0.05-1 FPs on normals on the free-response receiver operating characteristic curve (FROC), incorporated into a tenfold cross validation framework. It was found that SVM classification using a Gaussian kernel offered significantly increased detection performance (P = 0.0002) compared to the reference methods. Varying training data and input features, SVMs showed improved exploitation of large feature sets. It is concluded that with the SVM-based CADe a significant reduction of FPs is possible outperforming other state-of-the-art approaches for breast mass CADe.

Health worker (internal customer) satisfaction and motivation in the public sector in Ghana.

PubMed

Agyepong, Irene Akua; Anafi, Patricia; Asiamah, Ebenezer; Ansah, Evelyn K; Ashon, Daniel A; Narh-Dometey, Christiana

2004-01-01

This paper describes factors affecting health worker motivation and satisfaction in the public sector in Ghana. The data are from a survey of public sector health care providers carried out in January 2002 and repeated in August 2003 using an interviewer administered structured questionnaire. It is part of a continuous quality improvement (CQI) effort in the health sector in the Greater Accra region of Ghana. Workplace obstacles identified that caused dissatisfaction and de-motivated staff in order of the most frequently mentioned were low salaries such that obtaining basic necessities of daily living becomes a problem; lack of essential equipment, tools and supplies to work with; delayed promotions; difficulties and inconveniences with transportation to work; staff shortages; housing, additional duty allowances and in-service (continuous) training. Others included children's education, vehicles to work with such as ambulances and pickups, staff transfer procedures, staff pre-service education inadequate for job requirements, and the effect of the job on family and other social factors. There were some differences in the percentages of staff selecting a given workplace obstacle between the purely rural districts, the highly urbanized Accra metropolis and the districts that were a mixture of urbanized and rural. It is unlikely that the Ghana Health Service can provide high quality of care to its end users (external customers) if workplace obstacles that de-motivate staff (internal customers) and negatively influence their performance are not properly recognized and addressed as a complex of inter-related problems producing a common result--dissatisfied poorly motivated staff and resulting poor quality services.

Inverse models: A necessary next step in ground-water modeling

USGS Publications Warehouse

Poeter, E.P.; Hill, M.C.

1997-01-01

Inverse models using, for example, nonlinear least-squares regression, provide capabilities that help modelers take full advantage of the insight available from ground-water models. However, lack of information about the requirements and benefits of inverse models is an obstacle to their widespread use. This paper presents a simple ground-water flow problem to illustrate the requirements and benefits of the nonlinear least-squares repression method of inverse modeling and discusses how these attributes apply to field problems. The benefits of inverse modeling include: (1) expedited determination of best fit parameter values; (2) quantification of the (a) quality of calibration, (b) data shortcomings and needs, and (c) confidence limits on parameter estimates and predictions; and (3) identification of issues that are easily overlooked during nonautomated calibration.Inverse models using, for example, nonlinear least-squares regression, provide capabilities that help modelers take full advantage of the insight available from ground-water models. However, lack of information about the requirements and benefits of inverse models is an obstacle to their widespread use. This paper presents a simple ground-water flow problem to illustrate the requirements and benefits of the nonlinear least-squares regression method of inverse modeling and discusses how these attributes apply to field problems. The benefits of inverse modeling include: (1) expedited determination of best fit parameter values; (2) quantification of the (a) quality of calibration, (b) data shortcomings and needs, and (c) confidence limits on parameter estimates and predictions; and (3) identification of issues that are easily overlooked during nonautomated calibration.

Observation of flow processes in the vadose zone using ERT on different space and time scales: results, obstacles, and suggestions

NASA Astrophysics Data System (ADS)

Noell, Ursula; Ganz, Christina; Lamparter, Axel; Duijnisveld, Wilhelmus; Bachmann, Jörg

2013-04-01

Electrical resistivity tomography (ERT) observes the flow processes in the vadose zone indirectly. ERT has been used to estimate water flow in different soil types and under different flow conditions using active experiments or monitoring the natural process in many cases. Our experiments in sand and loess soil connected ERT with local soil probing using TDR devices and tensiometers in order to proof the reliability of the ERT inversion results in terms of infiltration velocity. Additionally, a colour tracer was used and sections through the infiltration zones were excavated in order to compare the shape of the dye -stained infiltration zone with the results of the ERT inversion. The data revealed the complicated infiltration pattern with a higher transport velocity in sand and a different shape than expected by classical soil hydraulic models. These results indicate the need for independent observations in order to correctly assess the water storage in the vadose zone with its hydrological consequences, the groundwater recharge and the contamination risk caused by rapid movement of water. ERT can be used for this purpose on different spatial- and time scales but for reliable results various obstacles need to be dealt with. Firstly, the ambiguity of the resistivity because soil resistivity depends on both, soil water content and electrical soil/water conductivity. This obstacle is less severe when the infiltration velocity is investigated, because then only the first onset of resistivity change is interpreted as the water arrival time. Our results show that the arrival of the water front as well as the final infiltration depth can be reliably detected. In contrast, this obstacle is very severe when the amount of water stored is observed using conductive tracer. The problem is not critical during a passive experiment when the natural rain fall and the waters fate through the vadose zone is monitored. The second obstacle is the limited resolution of ERT which deteriorates with depth. The resolution depends on the electrode distances and the depth resolution can be increased by using borehole electrodes. However, if one ha of land is to be observed with a reasonable number of electrodes (some 100) the resolution will be some 10 m. The structures, however, that influence the infiltration process, might be much smaller. Therefore, it is suggested to use ERT as the tool to observe and quantify the infiltration process with regard to time and space on a scale of some meters. For independent proof local TDR devices should be inserted within the investigated area for calibration. These results should then be used to establish a physical soil model that grasps the observed process correctly in time and space. The next step would then be to repeat these local measurements at different locations where the similarity of the processes is at doubt. Only when this is confirmed or discarded, further upscaling steps can be done reliably.

Fuzzy logic path planning system for collision avoidance by an autonomous rover vehicle

NASA Technical Reports Server (NTRS)

Murphy, Michael G.

1993-01-01

The Space Exploration Initiative of the United States will make great demands upon NASA and its limited resources. One aspect of great importance will be providing for autonomous (unmanned) operation of vehicles and/or subsystems in space flight and surface exploration. An additional, complicating factor is that much of the need for autonomy of operation will take place under conditions of great uncertainty or ambiguity. Issues in developing an autonomous collision avoidance subsystem within a path planning system for application in a remote, hostile environment that does not lend itself well to remote manipulation by Earth-based telecommunications is addressed. A good focus is unmanned surface exploration of Mars. The uncertainties involved indicate that robust approaches such as fuzzy logic control are particularly appropriate. Four major issues addressed are (1) avoidance of a fuzzy moving obstacle; (2) backoff from a deadend in a static obstacle environment; (3) fusion of sensor data to detect obstacles; and (4) options for adaptive learning in a path planning system. Examples of the need for collision avoidance by an autonomous rover vehicle on the surface of Mars with a moving obstacle would be wind-blown debris, surface flow or anomalies due to subsurface disturbances, another vehicle, etc. The other issues of backoff, sensor fusion, and adaptive learning are important in the overall path planning system.

Obstacle negotiation control for a mobile robot suspended on overhead ground wires by optoelectronic sensors

NASA Astrophysics Data System (ADS)

Zheng, Li; Yi, Ruan

2009-11-01

Power line inspection and maintenance already benefit from developments in mobile robotics. This paper presents mobile robots capable of crossing obstacles on overhead ground wires. A teleoperated robot realizes inspection and maintenance tasks on power transmission line equipment. The inspection robot is driven by 11 motor with two arms, two wheels and two claws. The inspection robot is designed to realize the function of observation, grasp, walk, rolling, turn, rise, and decline. This paper is oriented toward 100% reliable obstacle detection and identification, and sensor fusion to increase the autonomy level. An embedded computer based on PC/104 bus is chosen as the core of control system. Visible light camera and thermal infrared Camera are both installed in a programmable pan-and-tilt camera (PPTC) unit. High-quality visual feedback rapidly becomes crucial for human-in-the-loop control and effective teleoperation. The communication system between the robot and the ground station is based on Mesh wireless networks by 700 MHz bands. An expert system programmed with Visual C++ is developed to implement the automatic control. Optoelectronic laser sensors and laser range scanner were installed in robot for obstacle-navigation control to grasp the overhead ground wires. A novel prototype with careful considerations on mobility was designed to inspect the 500KV power transmission lines. Results of experiments demonstrate that the robot can be applied to execute the navigation and inspection tasks.

Mine Safety Detection System (MSDS)

DTIC Science & Technology

2012-09-01

that comes to rest on the bottom in either sea lane will represent a navigation obstacle resulting in lane closure until the wreck can be cleared...order in which the depth layers are searched follows a rational that emulates the analogy of “testing the waters before diving in”. As the oil

Interaction of vestibular, echolocation, and visual modalities guiding flight by the big brown bat, Eptesicus fuscus.

PubMed

Horowitz, Seth S; Cheney, Cheryl A; Simmons, James A

2004-01-01

The big brown bat (Eptesicus fuscus) is an aerial-feeding insectivorous species that relies on echolocation to avoid obstacles and to detect flying insects. Spatial perception in the dark using echolocation challenges the vestibular system to function without substantial visual input for orientation. IR thermal video recordings show the complexity of bat flights in the field and suggest a highly dynamic role for the vestibular system in orientation and flight control. To examine this role, we carried out laboratory studies of flight behavior under illuminated and dark conditions in both static and rotating obstacle tests while administering heavy water (D2O) to impair vestibular inputs. Eptesicus carried out complex maneuvers through both fixed arrays of wires and a rotating obstacle array using both vision and echolocation, or when guided by echolocation alone. When treated with D2O in combination with lack of visual cues, bats showed considerable decrements in performance. These data indicate that big brown bats use both vision and echolocation to provide spatial registration for head position information generated by the vestibular system.

A Framework for Applying Point Clouds Grabbed by Multi-Beam LIDAR in Perceiving the Driving Environment

PubMed Central

Liu, Jian; Liang, Huawei; Wang, Zhiling; Chen, Xiangcheng

2015-01-01

The quick and accurate understanding of the ambient environment, which is composed of road curbs, vehicles, pedestrians, etc., is critical for developing intelligent vehicles. The road elements included in this work are road curbs and dynamic road obstacles that directly affect the drivable area. A framework for the online modeling of the driving environment using a multi-beam LIDAR, i.e., a Velodyne HDL-64E LIDAR, which describes the 3D environment in the form of a point cloud, is reported in this article. First, ground segmentation is performed via multi-feature extraction of the raw data grabbed by the Velodyne LIDAR to satisfy the requirement of online environment modeling. Curbs and dynamic road obstacles are detected and tracked in different manners. Curves are fitted for curb points, and points are clustered into bundles whose form and kinematics parameters are calculated. The Kalman filter is used to track dynamic obstacles, whereas the snake model is employed for curbs. Results indicate that the proposed framework is robust under various environments and satisfies the requirements for online processing. PMID:26404290

PRIMUS: autonomous navigation in open terrain with a tracked vehicle

NASA Astrophysics Data System (ADS)

Schaub, Guenter W.; Pfaendner, Alfred H.; Schaefer, Christoph

2004-09-01

The German experimental robotics program PRIMUS (PRogram for Intelligent Mobile Unmanned Systems) is focused on solutions for autonomous driving in unknown open terrain, over several project phases under specific realization aspects for more than 12 years. The main task of the program is to develop algorithms for a high degree of autonomous navigation skills with off-the-shelf available hardware/sensor technology and to integrate this into military vehicles. For obstacle detection a Dornier-3D-LADAR is integrated on a tracked vehicle "Digitized WIESEL 2". For road-following a digital video camera and a visual perception module from the Universitaet der Bundeswehr Munchen (UBM) has been integrated. This paper gives an overview of the PRIMUS program with a focus on the last program phase D (2001 - 2003). This includes the system architecture, the description of the modes of operation and the technology development with the focus on obstacle avoidance and obstacle classification using a 3-D LADAR. A collection of experimental results and a short look at the next steps in the German robotics program will conclude the paper.

Rover Graphical Simulator

NASA Technical Reports Server (NTRS)

Bon, Bruce; Seraji, Homayoun

2007-01-01

Rover Graphical Simulator (RGS) is a package of software that generates images of the motion of a wheeled robotic exploratory vehicle (rover) across terrain that includes obstacles and regions of varying traversability. The simulated rover moves autonomously, utilizing reasoning and decision-making capabilities of a fuzzy-logic navigation strategy to choose its path from an initial to a final state. RGS provides a graphical user interface for control and monitoring of simulations. The numerically simulated motion is represented as discrete steps with a constant time interval between updates. At each simulation step, a dot is placed at the old rover position and a graphical symbol representing the rover is redrawn at the new, updated position. The effect is to leave a trail of dots depicting the path traversed by the rover, the distances between dots being proportional to the local speed. Obstacles and regions of low traversability are depicted as filled circles, with buffer zones around them indicated by enclosing circles. The simulated robot is equipped with onboard sensors that can detect regional terrain traversability and local obstacles out to specified ranges. RGS won the NASA Group Achievement Award in 2002.

Vegetation Use for Resolving Electromagnetic Compatibility and Ecology Issues

NASA Astrophysics Data System (ADS)

Zvezdina, M. Yu; Shokova, Yu A.; Cherckesova, L. V.; Golovko, T. M.; Cherskaya, A. A.

2017-05-01

The wide spread of Information and Communication Technologies and the development of Internet-enabled mobile applications have aggravated electromagnetic compatibility and ecology problems. Inability to excite electromagnetic field of a desired structure and strength with traditional approaches actualizes additional actions, including providing diffraction on propagation path, to resolve these issues. Diffraction on a stand-alone obstacle along the propagation path and the one on set of obstacles near receive antenna location can be considered as the additional actions in ultrashort band. The accomplished studies have shown that one the most effective means to lower electromagnetic field strength is to shield the receive antenna with vegetation from jamming radio equipment. Moreover, vegetation resolves electromagnetic ecology issues, for the energy flux density can be lowered by about two orders of magnitude.

Towards high-speed autonomous navigation of unknown environments

NASA Astrophysics Data System (ADS)

Richter, Charles; Roy, Nicholas

2015-05-01

In this paper, we summarize recent research enabling high-speed navigation in unknown environments for dynamic robots that perceive the world through onboard sensors. Many existing solutions to this problem guarantee safety by making the conservative assumption that any unknown portion of the map may contain an obstacle, and therefore constrain planned motions to lie entirely within known free space. In this work, we observe that safety constraints may significantly limit performance and that faster navigation is possible if the planner reasons about collision with unobserved obstacles probabilistically. Our overall approach is to use machine learning to approximate the expected costs of collision using the current state of the map and the planned trajectory. Our contribution is to demonstrate fast but safe planning using a learned function to predict future collision probabilities.

Technical assistance and the transfer of remote sensing technology. [for economic development

NASA Technical Reports Server (NTRS)

Chipman, R.

1977-01-01

The transfer of technology from industrialized countries to the third world is a very complicated process and one that requires a great deal of research and development. The political and social obstacles to this transfer are generally greater than the technical obstacles, but technical assistance programs have neither the competence nor the inclination to deal with these factors adequately. Funding for technical assistance in remote sensing is now expanding rapidly, and there is a growing need for institutions to study and promote the effective use of this technology for economic development. The United Nations, the Food and Agriculture Organization, the World Bank, the United States Agency for International Development and the Canadian technical assistance agencies take different approaches to the problem and deal with the political pressures in different ways.

Hybrid Motion Planning with Multiple Destinations

NASA Technical Reports Server (NTRS)

Clouse, Jeffery

1998-01-01

In our initial proposal, we laid plans for developing a hybrid motion planning system that combines the concepts of visibility-based motion planning, artificial potential field based motion planning, evolutionary constrained optimization, and reinforcement learning. Our goal was, and still is, to produce a hybrid motion planning system that outperforms the best traditional motion planning systems on problems with dynamic environments. The proposed hybrid system will be in two parts the first is a global motion planning system and the second is a local motion planning system. The global system will take global information about the environment, such as the placement of the obstacles and goals, and produce feasible paths through those obstacles. We envision a system that combines the evolutionary-based optimization and visibility-based motion planning to achieve this end.

Impacts of quantum dots in molecular detection and bioimaging of cancer

PubMed Central

Mashinchian, Omid; Johari-Ahar, Mohammad; Ghaemi, Behnaz; Rashidi, Mohammad; Barar, Jaleh; Omidi, Yadollah

2014-01-01

Introduction: A number of assays have so far been exploited for detection of cancer biomarkers in various malignancies. However, the expression of cancer biomarker(s) appears to be extremely low, therefore accurate detection demands sensitive optical imaging probes. While optical detection using conventional fluorophores often fail due to photobleaching problems, quantum dots (QDs) offer stable optical imaging in vitro and in vivo. Methods: In this review, we briefly overview the impacts of QDs in biology and its applications in bioimaging of malignancies. We will also delineate the existing obstacles for early detection of cancer and the intensifying use of QDs in advancement of diagnostic devices. Results: Of the QDs, unlike the II-VI type QDs (e.g., cadmium (Cd), selenium (Se) or tellurium (Te)) that possess inherent cytotoxicity, the I-III-VI 2 type QDs (e.g., AgInS2, CuInS2, ZnS-AgInS2) appear to be less toxic bioimaging agents with better control of band-gap energies. As highly-sensitive bioimaging probes, advanced hybrid QDs (e.g., QD-QD, fluorochrome-QD conjugates used for sensing through fluorescence resonance energy transfer (FRET), quenching, and barcoding techniques) have also been harnessed for the detection of biomarkers and the monitoring of delivery of drugs/genes to the target sites. Antibody-QD (Ab-QD) and aptamer- QD (Ap-QD) bioconjugates, once target the relevant biomarker, can provide highly stable photoluminescence (PL) at the target sites. In addition to their potential as nanobiosensors, the bioconjugates of QDs with homing devices have successfully been used for the development of smart nanosystems (NSs) providing targeted bioimaging and photodynamic therapy (PDT). Conclusion: Having possessed great deal of photonic characteristics, QDs can be used for development of seamless multifunctional nanomedicines, theranostics and nanobiosensors. PMID:25337468

A new measure for the assessment of visual awareness in individuals with tunnel vision.

PubMed

AlSaqr, Ali M; Dickinson, Chris M

2017-01-01

Individuals with a restricted peripheral visual field or tunnel vision (TV) have problems moving about and avoiding obstacles. Some individuals adapt better than others and some use assistive optical aids, so measurement of the visual field is not sufficient to describe their performance. In the present study, we developed a new clinical test called the 'Assessment of Visual Awareness (AVA)', which can be used to measure detection of peripheral targets. The participants were 20 patients with TV due to retinitis pigmentosa (PTV) and 50 normally sighted participants with simulated tunnel vision (STV) using goggles. In the AVA test, detection times were measured, when subjects searched for 24 individually presented, one degree targets, randomly positioned in a 60 degrees noise background. Head and eye movements were allowed and the presentation time was unlimited. The test validity was investigated by correlating the detection times with the 'percentage of preferred walking speed' (PPWS) and the 'number of collisions' on an indoor mobility course. In PTV and STV, the detection times had significant negative correlation with the field of view. The detection times had significant positive relations with target location. In the STV, the detection time was significantly negatively correlated with the PPWS and significantly positively correlated with the collisions score on the indoor mobility course. In the PTV, the relationship was not statistically significant. No significant difference in performance of STV was found when repeating the test one to two weeks later. The proposed AVA test was sensitive to the field of view and target location. The test is unique in design, quick, simple to deliver and both repeatable and valid. It could be a valuable tool to test different rehabilitation strategies in patients with TV. © 2016 Optometry Australia.

Extending substructure based iterative solvers to multiple load and repeated analyses

NASA Technical Reports Server (NTRS)

Farhat, Charbel

1993-01-01

Direct solvers currently dominate commercial finite element structural software, but do not scale well in the fine granularity regime targeted by emerging parallel processors. Substructure based iterative solvers--often called also domain decomposition algorithms--lend themselves better to parallel processing, but must overcome several obstacles before earning their place in general purpose structural analysis programs. One such obstacle is the solution of systems with many or repeated right hand sides. Such systems arise, for example, in multiple load static analyses and in implicit linear dynamics computations. Direct solvers are well-suited for these problems because after the system matrix has been factored, the multiple or repeated solutions can be obtained through relatively inexpensive forward and backward substitutions. On the other hand, iterative solvers in general are ill-suited for these problems because they often must restart from scratch for every different right hand side. In this paper, we present a methodology for extending the range of applications of domain decomposition methods to problems with multiple or repeated right hand sides. Basically, we formulate the overall problem as a series of minimization problems over K-orthogonal and supplementary subspaces, and tailor the preconditioned conjugate gradient algorithm to solve them efficiently. The resulting solution method is scalable, whereas direct factorization schemes and forward and backward substitution algorithms are not. We illustrate the proposed methodology with the solution of static and dynamic structural problems, and highlight its potential to outperform forward and backward substitutions on parallel computers. As an example, we show that for a linear structural dynamics problem with 11640 degrees of freedom, every time-step beyond time-step 15 is solved in a single iteration and consumes 1.0 second on a 32 processor iPSC-860 system; for the same problem and the same parallel processor, a pair of forward/backward substitutions at each step consumes 15.0 seconds.

The Role of the Frontal Lobe in Complex Walking Among Patients With Parkinson's Disease and Healthy Older Adults: An fNIRS Study.

PubMed

Maidan, Inbal; Nieuwhof, Freek; Bernad-Elazari, Hagar; Reelick, Miriam F; Bloem, Bas R; Giladi, Nir; Deutsch, Judith E; Hausdorff, Jeffery M; Claassen, Jurgen A H; Mirelman, Anat

2016-11-01

Gait is influenced by higher order cognitive and cortical control mechanisms. Functional near infrared spectroscopy (fNIRS) has been used to examine frontal activation during walking in healthy older adults, reporting increased oxygenated hemoglobin (HbO2) levels during dual task walking (DT), compared with usual walking. To investigate the role of the frontal lobe during DT and obstacle negotiation, in healthy older adults and patients with Parkinson's disease (PD). Thirty-eight healthy older adults (mean age 70.4 ± 0.9 years) and 68 patients with PD (mean age 71.7 ± 1.1 years,) performed 3 walking tasks: (a) usual walking, (b) DT walking, and (c) obstacles negotiation, with fNIRS and accelerometers. Linear-mix models were used to detect changes between groups and within tasks. Patients with PD had higher activation during usual walking (P < .030). During DT, HbO2 increased only in healthy older adults (P < .001). During obstacle negotiation, HbO2 increased in patients with PD (P = .001) and tended to increase in healthy older adults (P = .053). Higher DT and obstacle cost (P < .003) and worse cognitive performance were observed in patients with PD (P = .001). A different pattern of frontal activation during walking was observed between groups. The higher activation during usual walking in patients with PD suggests that the prefrontal cortex plays an important role already during simple walking. However, higher activation relative to baseline during obstacle negotiation and not during DT in the patients with PD demonstrates that prefrontal activation depends on the nature of the task. These findings may have important implications for rehabilitation of gait in patients with PD. © The Author(s) 2016.

PSD Camera Based Position and Posture Control of Redundant Robot Considering Contact Motion

NASA Astrophysics Data System (ADS)

Oda, Naoki; Kotani, Kentaro

The paper describes a position and posture controller design based on the absolute position by external PSD vision sensor for redundant robot manipulator. The redundancy enables a potential capability to avoid obstacle while continuing given end-effector jobs under contact with middle link of manipulator. Under contact motion, the deformation due to joint torsion obtained by comparing internal and external position sensor, is actively suppressed by internal/external position hybrid controller. The selection matrix of hybrid loop is given by the function of the deformation. And the detected deformation is also utilized in the compliant motion controller for passive obstacle avoidance. The validity of the proposed method is verified by several experimental results of 3link planar redundant manipulator.

Robotic guarded motion system and method

DOEpatents

Bruemmer, David J.

2010-02-23

A robot platform includes perceptors, locomotors, and a system controller. The system controller executes instructions for repeating, on each iteration through an event timing loop, the acts of defining an event horizon, detecting a range to obstacles around the robot, and testing for an event horizon intrusion. Defining the event horizon includes determining a distance from the robot that is proportional to a current velocity of the robot and testing for the event horizon intrusion includes determining if any range to the obstacles is within the event horizon. Finally, on each iteration through the event timing loop, the method includes reducing the current velocity of the robot in proportion to a loop period of the event timing loop if the event horizon intrusion occurs.

Numerical computations on one-dimensional inverse scattering problems

NASA Technical Reports Server (NTRS)

Dunn, M. H.; Hariharan, S. I.

1983-01-01

An approximate method to determine the index of refraction of a dielectric obstacle is presented. For simplicity one dimensional models of electromagnetic scattering are treated. The governing equations yield a second order boundary value problem, in which the index of refraction appears as a functional parameter. The availability of reflection coefficients yield two additional boundary conditions. The index of refraction by a k-th order spline which can be written as a linear combination of B-splines is approximated. For N distinct reflection coefficients, the resulting N boundary value problems yield a system of N nonlinear equations in N unknowns which are the coefficients of the B-splines.

[Sensory integration: hierarchy and synchronization].

PubMed

Kriukov, V I

2005-01-01

This is the first in the series of mini-reviews devoted to the basic problems and most important effects of attention in terms of neuronal modeling. We believe that the absence of the unified view on wealth of new date on attention is the main obstacle for further understanding of higher nervous activity. The present work deals with the main ground problem of reconciling two competing architectures designed to integrate the sensory information in the brain. The other mini-reviews will be concerned with the remaining five or six problems of attention, all of them to be ultimately resolved uniformly in the framework of small modification of dominant model of attention and memory.

Academic Bullying: A Barrier to Tenure and Promotion for African-American Faculty

ERIC Educational Resources Information Center

Frazier, Kimberly N.

2011-01-01

The author discusses the problem of retention of African American faculty due to tenure and promotion issues. The author outlines obstacles that African American face in the workplace while seeking tenure and promotion in academia. A case example is presented that illuminates how these stressors manifest in the academic setting and recommendations…

Public Attitudes toward Low-Income Families and Children: Circumstances Dictate Public Views of Government Assistance. Research Report.

ERIC Educational Resources Information Center

Lennon, Mary Clare; Appelbaum, Lauren D.; Aber, J. Lawrence; McCaskie, Katherine

This study examined public attitudes toward the most vulnerable of the poor--those who experience significant personal or situational problems that can create obstacles to employment. Using both a factorial survey methodology and a general attitude survey, researchers gathered information about public opinion toward people in need, low-income…

Evaluation of Learning Environments for Object-Oriented Programming: Measuring Cognitive Load with a Novel Measurement Technique

ERIC Educational Resources Information Center

Uysal, Murat Pasa

2016-01-01

Various methods and tools have been proposed to overcome the learning obstacles for Object-Oriented Programming (OOP). However, it remains difficult especially for novice learners. The problem may be not only adopting an instructional method, but also an Integrated Development Environment (IDE). Learners employ IDEs as a means to solve programming…

Parental Attributions and Perceived Intervention Benefits and Obstacles as Predictors of Maternal Engagement in a Preventive Parenting Program

ERIC Educational Resources Information Center

Nordstrom, Alicia H.; Dumas, Jean E.; Gitter, Alexandra H.

2008-01-01

This study integrates and applies theoretical models linking parent cognitions to maternal engagement in a parenting program to prevent child aggression and conduct problems. African American and European American mothers of preschoolers (N = 347) reported on their child's behavior, family demographics, and parental cognitions (i.e., parenting…

Mobilization Bibliography: Periodical Articles (1915 - 1982),

DTIC Science & Technology

1983-10-01

12-13+. 131 Goldich, Robert L. "Mobilization for the Apocalypse." ARMY 28 (May 1978): 22-25+. 132 Gray, Colin S. "The Military Requirements of U.S...the Last Year; The Obstacles Which Stand in the Way of an All-Out Record; Some Problems and Proposals." NEW MASSES (December 8, 1942): 5-7. 632 Drury

Features and Historical Aspects of the Philippines Educational System

ERIC Educational Resources Information Center

Musa, Sajid; Ziatdinov, Rushan

2012-01-01

This article deals with the features of the Philippine educational system. Additionally, brief and concise information will be given on how the educational system came into existence, the organization and the structure of the system itself. This paper also tackles the obstacles and problems observed in the past and up to the present, and gives…

Global output feedback stabilisation of stochastic high-order feedforward nonlinear systems with time-delay

NASA Astrophysics Data System (ADS)

Zhang, Kemei; Zhao, Cong-Ran; Xie, Xue-Jun

2015-12-01

This paper considers the problem of output feedback stabilisation for stochastic high-order feedforward nonlinear systems with time-varying delay. By using the homogeneous domination theory and solving several troublesome obstacles in the design and analysis, an output feedback controller is constructed to drive the closed-loop system globally asymptotically stable in probability.

Beyond Obstacles and Problems: Women Principals in Spain Leading Change in Their Schools

ERIC Educational Resources Information Center

Coronel, Jose M.; Moreno, Emilia; Carrasco, Maria J.

2010-01-01

In Spain, the presence of women in decision-making positions and in positions of power is not proportional to the total number of women within the field of education. Women have encountered personal and professional barriers in their advancement to the principalship; however, significant and substantive changes to school policy are revealed when…

Principals' Approaches to Cultivating Teacher Effectiveness: Constraints and Opportunities in Hiring, Assigning, Evaluating, and Developing Teachers

ERIC Educational Resources Information Center

Donaldson, Morgaen L.

2013-01-01

Purpose: How principals hire, assign, evaluate, and provide growth opportunities to teachers likely have major ramifications for teacher effectiveness and student learning. This article reports on the barriers principals encountered when carrying out these functions and variations in the degree to which they identified obstacles and problem-solved…

What cognitive strategies do orangutans (Pongo pygmaeus) use to solve a trial-unique puzzle-tube task incorporating multiple obstacles?

PubMed

Tecwyn, Emma C; Thorpe, Susannah K S; Chappell, Jackie

2012-01-01

Apparently sophisticated behaviour during problem-solving is often the product of simple underlying mechanisms, such as associative learning or the use of procedural rules. These and other more parsimonious explanations need to be eliminated before higher-level cognitive processes such as causal reasoning or planning can be inferred. We presented three Bornean orangutans with 64 trial-unique configurations of a puzzle-tube to investigate whether they were able to consider multiple obstacles in two alternative paths, and subsequently choose the correct direction in which to move a reward in order to retrieve it. We were particularly interested in how subjects attempted to solve the task, namely which behavioural strategies they could have been using, as this is how we may begin to elucidate the cognitive mechanisms underpinning their choices. To explore this, we simulated performance outcomes across the 64 trials for various procedural rules and rule combinations that subjects may have been using based on the configuration of different obstacles. Two of the three subjects solved the task, suggesting that they were able to consider at least some of the obstacles in the puzzle-tube before executing action to retrieve the reward. This is impressive compared with the past performances of great apes on similar, arguably less complex tasks. Successful subjects may have been using a heuristic rule combination based on what they deemed to be the most relevant cue (the configuration of the puzzle-tube ends), which may be a cognitively economical strategy.

Distance estimation and collision prediction for on-line robotic motion planning

NASA Technical Reports Server (NTRS)

Kyriakopoulos, K. J.; Saridis, G. N.

1992-01-01

An efficient method for computing the minimum distance and predicting collisions between moving objects is presented. This problem is incorporated into the framework of an in-line motion-planning algorithm to satisfy collision avoidance between a robot and moving objects modeled as convex polyhedra. In the beginning, the deterministic problem where the information about the objects is assumed to be certain is examined. L(1) or L(infinity) norms are used to represent distance and the problem becomes a linear programming problem. The stochastic problem is formulated where the uncertainty is induced by sensing and the unknown dynamics of the moving obstacles. Two problems are considered: First, filtering of the distance between the robot and the moving object at the present time. Second, prediction of the minimum distance in the future in order to predict the collision time.

An adaptive finite element method for the inequality-constrained Reynolds equation

NASA Astrophysics Data System (ADS)

Gustafsson, Tom; Rajagopal, Kumbakonam R.; Stenberg, Rolf; Videman, Juha

2018-07-01

We present a stabilized finite element method for the numerical solution of cavitation in lubrication, modeled as an inequality-constrained Reynolds equation. The cavitation model is written as a variable coefficient saddle-point problem and approximated by a residual-based stabilized method. Based on our recent results on the classical obstacle problem, we present optimal a priori estimates and derive novel a posteriori error estimators. The method is implemented as a Nitsche-type finite element technique and shown in numerical computations to be superior to the usually applied penalty methods.

A Multi-Beam Interferometer and Its Use as a Screening System in Gynecologic Cytology

NASA Astrophysics Data System (ADS)

Fujii, Ken-ichi; Suzuki, Norihito

1982-11-01

Clumps of cells remaining after the cell separation process present the greatest obstacle to the development of an automated screening system using flow cytofluorometry. There are two main problems caused by such clumps of cells. One occurs in the flow system, when the clumps block the nozzles, while the other occurs in the measuring system, when the clumps give a false fluorescence intensity. The former problem can be solved by designing the flow system appropriately, and the latter can be obviated by using a multi-beam interferometer.

An intelligent approach to welding robot selection

NASA Astrophysics Data System (ADS)

Milano, J.; Mauk, S. D.; Flitter, L.; Morris, R.

1993-10-01

In a shipyard where multiple stationary and mobile workcells are employed in the fabrication of components of complex sub-assemblies,efficient operation requires an intelligent method of scheduling jobs and selecting workcells based on optimum throughput and cost. The achievement of this global solution requires the successful organization of resource availability,process requirements,and process constraints. The Off-line Planner (OLP) of the Programmable Automated Weld Systemd (PAWS) is capable of advanced modeling of weld processes and environments as well as the generation of complete weld procedures. These capabilities involve the integration of advanced Computer Aided Design (CAD), path planning, and obstacle detection and avoidance techniques as well as the synthesis of complex design and process information. These existing capabilities provide the basis of the functionality required for the successful implementation of an intelligent weld robot selector and material flow planner. Current efforts are focused on robot selection via the dynamic routing of components to the appropriate work cells. It is proposed that this problem is a variant of the “Traveling Salesman Problem” (TSP) that has been proven to belong to a larger set of optimization problems termed nondeterministic polynomial complete (NP complete). In this paper, a heuristic approach utilizing recurrent neural networks is explored as a rapid means of producing a near optimal, if not optimal, bdweld robot selection.

High-integrity databases for helicopter operations

NASA Astrophysics Data System (ADS)

Pschierer, Christian; Schiefele, Jens; Lüthy, Juerg

2009-05-01

Helicopter Emergency Medical Service missions (HEMS) impose a high workload on pilots due to short preparation time, operations in low level flight, and landings in unknown areas. The research project PILAS, a cooperation between Eurocopter, Diehl Avionics, DLR, EADS, Euro Telematik, ESG, Jeppesen, the Universities of Darmstadt and Munich, and funded by the German government, approached this problem by researching a pilot assistance system which supports the pilots during all phases of flight. The databases required for the specified helicopter missions include different types of topological and cultural data for graphical display on the SVS system, AMDB data for operations at airports and helipads, and navigation data for IFR segments. The most critical databases for the PILAS system however are highly accurate terrain and obstacle data. While RTCA DO-276 specifies high accuracies and integrities only for the areas around airports, HEMS helicopters typically operate outside of these controlled areas and thus require highly reliable terrain and obstacle data for their designated response areas. This data has been generated by a LIDAR scan of the specified test region. Obstacles have been extracted into a vector format. This paper includes a short overview of the complete PILAS system and then focus on the generation of the required high quality databases.

Co-management of Water, Energy, and Food Systems: Where Are We and What Does it Take for Implementation?

NASA Astrophysics Data System (ADS)

Akhbari, M.

2015-12-01

Water, energy, and food are closely bound in consumption and production patterns. To increase resource efficiency and productivity in a sustainable fashion, co-management of water, energy, and food resources is becoming inevitable. These co-management schemes require implementation of nexus-based approaches, which takes the interconnections of water, energy, and food systems into account and considers that development in one area may have major effects on others. While society, economy and environment are the action areas to implement a nexus approach, finance, governance, infrastructure and technology can create solutions. Existing obstacles in the action areas and challenges associated with creating solutions increase the complexities to develop nexus-based approaches and complicate their implementation. This study, identifies existing social, economic, and environmental obstacles, financial demands and constraints, shortcomings in governance, and infrastructure problems in the United States as the main challenges that need to be overcome. Then, it will be discussed how advanced technology could be employed to facilitate implementation of nexus-based approaches, followed by providing some recommendations to enable institutions to employ new technology, overcome existing obstacles, and address challenges in order to implement nexus-based management approaches.

Shortest multiple disconnected path for the analysis of entanglements in two- and three-dimensional polymeric systems

NASA Astrophysics Data System (ADS)

Kröger, Martin

2005-06-01

We present an algorithm which returns a shortest path and related number of entanglements for a given configuration of a polymeric system in 2 or 3 dimensions. Rubinstein and Helfand, and later Everaers et al. introduced a concept to extract primitive paths for dense polymeric melts made of linear chains (a multiple disconnected multibead 'path'), where each primitive path is defined as a path connecting the (space-fixed) ends of a polymer under the constraint of non-interpenetration (excluded volume) between primitive paths of different chains, such that the multiple disconnected path fulfills a minimization criterion. The present algorithm uses geometrical operations and provides a—model independent—efficient approximate solution to this challenging problem. Primitive paths are treated as 'infinitely' thin (we further allow for finite thickness to model excluded volume), and tensionless lines rather than multibead chains, excluded volume is taken into account without a force law. The present implementation allows to construct a shortest multiple disconnected path (SP) for 2D systems (polymeric chain within spherical obstacles) and an optimal SP for 3D systems (collection of polymeric chains). The number of entanglements is then simply obtained from the SP as either the number of interior kinks, or from the average length of a line segment. Further, information about structure and potentially also the dynamics of entanglements is immediately available from the SP. We apply the method to study the 'concentration' dependence of the degree of entanglement in phantom chain systems. Program summaryTitle of program:Z Catalogue number:ADVG Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVG Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Computer for which the program is designed and others on which it has been tested: Silicon Graphics (Irix), Sun (Solaris), PC (Linux) Operating systems or monitors under which the program has been tested: UNIX, Linux Program language used: USANSI Fortran 77 and Fortran 90 Memory required to execute with typical data: 1 MByte No. of lines in distributed program, including test data, etc.: 10 660 No. of bytes in distributed program, including test data, etc.: 119 551 Distribution formet:tar.gz Nature of physical problem: The problem is to obtain primitive paths substantiating a shortest multiple disconnected path (SP) for a given polymer configuration (chains of particles, with or without additional single particles as obstacles for the 2D case). Primitive paths are here defined as in [M. Rubinstein, E. Helfand, J. Chem. Phys. 82 (1985) 2477; R. Everaers, S.K. Sukumaran, G.S. Grest, C. Svaneborg, A. Sivasubramanian, K. Kremer, Science 303 (2004) 823] as the shortest line (path) respecting 'topological' constraints (from neighboring polymers or point obstacles) between ends of polymers. There is a unique solution for the 2D case. For the 3D case it is unique if we construct a primitive path of a single chain embedded within fixed line obstacles [J.S.B. Mitchell, Geometric shortest paths and network optimization, in: J.-R. Sack, J. Urrutia (Eds.), Handbook of Computational Geometry, Elsevier, Amsterdam, 2000, pp. 633-701]. For a large 3D configuration made of several chains, short is meant to be the Euclidean shortest multiple disconnected path (SP) where primitive paths are constructed for all chains simultaneously. While the latter problem, in general, does not possess a unique solution, the algorithm must return a locally optimal solution, robust against minor displacements of the disconnected path and chain re-labeling. The problem is solved if the number of kinks (or entanglements Z), explicitly deduced from the SP, is quite insensitive to the exact conformation of the SP which allows to estimate Z with a small error. Efficient method of solution: Primitive paths are constructed from the given polymer configuration (a non-shortest multiple disconnected path, including obstacles, if present) by first replacing each polymer contour by a line with a number of 'kinks' (beads, nodes) and 'segments' (edges). To obtain primitive paths, defined to be uncrossable by any other objects (neighboring primitive paths, line or point obstacles), the algorithm minimizes the length of all primitive paths consecutively, until a final minimum Euclidean length of the SP is reached. Fast geometric operations rather than dynamical methods are used to minimize the contour lengths of the primitive paths. Neighbor lists are used to keep track of potentially intersecting segments of other chains. Periodic boundary conditions are employed. A finite small line thickness is used in order to make sure that entanglements are not 'lost' due to finite precision of representation of numbers. Restrictions on the complexity of the problem: For a single chain embedded within fixed line or point obstacles, the algorithm returns the exact SP. For more complex problems, the algorithm returns a locally optimal SP. Except for exotic, probably rare, configurations it turns out that different locally optimal SPs possess quite an identical number of nodes. In general, the problem constructing the SP is known to be NP-hard [J.S.B. Mitchell, Geometric shortest paths and network optimization, in: J.-R. Sack, J. Urrutia (Eds.), Handbook of Computational Geometry, Elsevier, Amsterdam, 2000, pp. 633-701], and we offer a solution which should suffice to analyze physical problems, and gives an estimate about the precision and uniqueness of the result (from a standard deviation by varying the parameter: cyclicswitch). The program is NOT restricted to handle systems for which segment lengths of the SP exceed half the box size. Typical running time: Typical running times are approximately two orders of magnitude shorter compared with the ones needed for a corresponding molecular dynamics approach, and scale mostly linearly with system size. We provide a benchmark table.

Context Oriented Information Integration

NASA Astrophysics Data System (ADS)

Mohania, Mukesh; Bhide, Manish; Roy, Prasan; Chakaravarthy, Venkatesan T.; Gupta, Himanshu

Faced with growing knowledge management needs, enterprises are increasingly realizing the importance of seamlessly integrating critical business information distributed across both structured and unstructured data sources. Academicians have focused on this problem but there still remain a lot of obstacles for its widespread use in practice. One of the key problems is the absence of schema in unstructured text. In this paper we present a new paradigm for integrating information which overcomes this problem - that of Context Oriented Information Integration. The goal is to integrate unstructured data with the structured data present in the enterprise and use the extracted information to generate actionable insights for the enterprise. We present two techniques which enable context oriented information integration and show how they can be used for solving real world problems.

Stepping over obstacles: gait patterns of healthy young and old adults.

PubMed

Chen, H C; Ashton-Miller, J A; Alexander, N B; Schultz, A B

1991-11-01

Falls associated with tripping over an obstacle can be devastating to elderly individuals, yet little is known about the strategies used for stepping over obstacles by either old or young adults. The gait of gender-matched groups of 24 young and 24 old healthy adults (mean ages 22 and 71 years) was studied during a 4 m approach to and while stepping over obstacles of 0, 25, 51, or 152 mm height and in level obstacle-free walking. Optoelectronic cameras and recorders were used to record approach and obstacle crossing speeds as well as bilateral lower extremity kinematic parameters that described foot placement and movement trajectories relative to the obstacle. The results showed that age had no effect on minimum swing foot clearance (FC) over an obstacle. For the 25 mm obstacle, mean FC was 64 mm, or approximately three times that used in level gait; FC increased nonlinearly with obstacle height for all subjects. Although no age differences were found in obstacle-free gait, old adults exhibited a significantly more conservative strategy when crossing obstacles, with slower crossing speed, shorter step length, and shorter obstacle-heel strike distance. In addition, the old adults crossed the obstacle so that it was 10% further forward in their obstacle-crossing step. Although all subjects successfully avoided the riskiest form of obstacle contact, tripping, 4/24 healthy old adults stepped on an obstacle, demonstrating an increased risk for obstacle contact with age.

Insight and search in Katona's five-square problem.

PubMed

Ollinger, Michael; Jones, Gary; Knoblich, Günther

2014-01-01

Insights are often productive outcomes of human thinking. We provide a cognitive model that explains insight problem solving by the interplay of problem space search and representational change, whereby the problem space is constrained or relaxed based on the problem representation. By introducing different experimental conditions that either constrained the initial search space or helped solvers to initiate a representational change, we investigated the interplay of problem space search and representational change in Katona's five-square problem. Testing 168 participants, we demonstrated that independent hints relating to the initial search space and to representational change had little effect on solution rates. However, providing both hints caused a significant increase in solution rates. Our results show the interplay between problem space search and representational change in insight problem solving: The initial problem space can be so large that people fail to encounter impasse, but even when representational change is achieved the resulting problem space can still provide a major obstacle to finding the solution.

Detection of memory loss of symmetry in the blockage of a turbulent flow within a duct

NASA Astrophysics Data System (ADS)

Santos, F. Rodrigues; da Silva Costa, G.; da Cunha Lima, A. T.; de Almeida, M. P.; da Cunha Lima, I. C.

This paper aims to detect memory loss of the symmetry of blockades in ducts and how far the information on the asymmetry of the obstacles travels in the turbulent flow from computational simulations with OpenFOAM. From a practical point of view, it seeks alternatives to detect the formation of obstructions in pipelines. The numerical solutions of the Navier-Stokes equations were obtained through the solver PisoFOAM of the OpenFOAM library, using the large Eddy simulation (LES) for the turbulent model. Obstructions were placed near the duct inlet and, keeping the blockade ratio fixed, five combinations for the obstacles sizes were adopted. The results show that the information about the symmetry is preserved for a larger distance near the ducts wall than in mid-channel. For an inlet velocity of 5m/s near the walls the memory is kept up to distance 40 times the duct width, while in mid-channel this distance is reduced almost by half. The maximum distance in which the symmetry breaking memory is preserved shows sensitivity to Reynolds number variations in regions near the duct walls, while in the mid channel that variations do not cause relevant effects to the velocity distribution.

Performance of Black Grandmothers: Perceptions of Three Generations of Females

ERIC Educational Resources Information Center

Strom, Robert D.; Heeder, Steven D.; Strom, Paris S.

2005-01-01

The purposes of this study were to (a) identify perceptions of 3 generations about the influence of black grandmothers; (b) describe contributions of black grandmothers and detect obstacles that limit their success; and (c) recommend curricula for programs to enhance success of black grandmothers. The 253 subjects were black grandmothers (n=76),…

Mobilizing Disability Experience to Inform Architectural Practice: Lessons Learned from a Field Study

ERIC Educational Resources Information Center

Vermeersch, Peter-Willem; Heylighen, Ann

2015-01-01

Through their bodily interaction with the designed environment, disabled people can detect obstacles and appreciate spatial qualities architects may not be attuned to. While designers in several disciplines acknowledge disabled people as lead or critical users, in architectural practice their embodied experience is hardly recognized as a valuable…

Coming from outside the Academy. Values and 2.0 Culture in Higher Education

ERIC Educational Resources Information Center

Serrat, Nuria; Rubio, Anna

2012-01-01

This article reflects on how some values, interests, and particularities of 2.0 culture enter on higher and postgraduate education institutions. Through the identification of the features of 2.0, this document visualizes some of the resistances, obstacles, possibilities, and opportunities detected in these institutions, many of them focusing on…

Hyperspectral Imaging and Obstacle Detection for Robotics Navigation

DTIC Science & Technology

2005-09-01

anatomy and diffraction process. 17 3.3 Technical Specifications of the System A. Brimrose AOTF Video Adaptor Specifications: Material TeO2 Active...sampled from glass case on person 2’s belt 530 pixels 20 pick-up white sampled from body panels of pick-up 600 pixels 21 pick-up blue sampled from

Development of Sensor Component for Terrain Evaluation and Obstacle Detection for an Unmanned Autonomous Vehicle

DTIC Science & Technology

2007-05-01

WALTER M. WALTZ SANDRA R. MEEKER, DR-IV Work Unit Manager Acting Chief, Force Protection Branch ___//signature...thank David Armstrong, for his support as a project manager . I thank Dr Mike Griffis, for putting all the efforts in building the NaviGator. I...21 Uncertainty Management

Development of the navigation system for visually impaired.

PubMed

Harada, Tetsuya; Kaneko, Yuki; Hirahara, Yoshiaki; Yanashima, Kenji; Magatani, Kazushige

2004-01-01

A white cane is a typical support instrument for the visually impaired. They use a white cane for the detection of obstacles while walking. So, the area where they have a mental map, they can walk using white cane without the help of others. However, they cannot walk independently in the unknown area, even if they use a white cane. Because, a white cane is a detecting device for obstacles and not a navigation device for their correct route. Now, we are developing the navigation system for the visually impaired which uses indoor space. In Japan, sometimes colored guide lines to the destination is used for a normal person. These lines are attached on the floor, we can reach the destination, if we walk along one of these line. In our system, a developed new white cane senses one colored guide line, and make notice to an user by vibration. This system recognizes the line of the color stuck on the floor by the optical sensor attached in the white cane. And in order to guide still more smoothly, infrared beacons (optical beacon), which can perform voice guidance, are also used.

Wearable ultrasonic guiding device with white cane for the visually impaired: A preliminary verisimilitude experiment.

PubMed

Cheng, Po-Hsun

2016-01-01

Several assistive technologies are available to help visually impaired individuals avoid obstructions while walking. Unfortunately, white canes and medical walkers are unable to detect obstacles on the road or react to encumbrances located above the waist. In this study, I adopted the cyber-physical system approach in the development of a cap-connected device to compensate for gaps in detection associated with conventional aids for the visually impaired. I developed a verisimilar, experimental route involving the participation of seven individuals with visual impairment, including straight sections, left turns, right turns, curves, and suspended objects. My aim was to facilitate the collection of information required for the practical use of the device. My findings demonstrate the feasibility of the proposed guiding device in alerting walkers to the presence of some kinds of obstacles from the small number of subjects. That is, it shows promise for future work and research with the proposed device. My findings provide a valuable reference for the further improvement of these devices as well as the establishment of experiments involving the visually impaired.

Real-Time Detection and Reading of LED/LCD Displays for Visually Impaired Persons

PubMed Central

Tekin, Ender; Coughlan, James M.; Shen, Huiying

2011-01-01

Modern household appliances, such as microwave ovens and DVD players, increasingly require users to read an LED or LCD display to operate them, posing a severe obstacle for persons with blindness or visual impairment. While OCR-enabled devices are emerging to address the related problem of reading text in printed documents, they are not designed to tackle the challenge of finding and reading characters in appliance displays. Any system for reading these characters must address the challenge of first locating the characters among substantial amounts of background clutter; moreover, poor contrast and the abundance of specular highlights on the display surface – which degrade the image in an unpredictable way as the camera is moved – motivate the need for a system that processes images at a few frames per second, rather than forcing the user to take several photos, each of which can take seconds to acquire and process, until one is readable. We describe a novel system that acquires video, detects and reads LED/LCD characters in real time, reading them aloud to the user with synthesized speech. The system has been implemented on both a desktop and a cell phone. Experimental results are reported on videos of display images, demonstrating the feasibility of the system. PMID:21804957

Your attention please: increasing ambient noise levels elicits a change in communication behaviour in humpback whales (Megaptera novaeangliae)

PubMed Central

Dunlop, Rebecca A.; Cato, Douglas H.; Noad, Michael J.

2010-01-01

High background noise is an important obstacle in successful signal detection and perception of an intended acoustic signal. To overcome this problem, many animals modify their acoustic signal by increasing the repetition rate, duration, amplitude or frequency range of the signal. An alternative method to ensure successful signal reception, yet to be tested in animals, involves the use of two different types of signal, where one signal type may enhance the other in periods of high background noise. Humpback whale communication signals comprise two different types: vocal signals, and surface-generated signals such as ‘breaching’ or ‘pectoral slapping’. We found that humpback whales gradually switched from primarily vocal to primarily surface-generated communication in increasing wind speeds and background noise levels, though kept both signal types in their repertoire. Vocal signals have the advantage of having higher information content but may have the disadvantage of loosing this information in a noisy environment. Surface-generated sounds have energy distributed over a greater frequency range and may be less likely to become confused in periods of high wind-generated noise but have less information content when compared with vocal sounds. Therefore, surface-generated sounds may improve detection or enhance the perception of vocal signals in a noisy environment. PMID:20392731

Your attention please: increasing ambient noise levels elicits a change in communication behaviour in humpback whales (Megaptera novaeangliae).

PubMed

Dunlop, Rebecca A; Cato, Douglas H; Noad, Michael J

2010-08-22

High background noise is an important obstacle in successful signal detection and perception of an intended acoustic signal. To overcome this problem, many animals modify their acoustic signal by increasing the repetition rate, duration, amplitude or frequency range of the signal. An alternative method to ensure successful signal reception, yet to be tested in animals, involves the use of two different types of signal, where one signal type may enhance the other in periods of high background noise. Humpback whale communication signals comprise two different types: vocal signals, and surface-generated signals such as 'breaching' or 'pectoral slapping'. We found that humpback whales gradually switched from primarily vocal to primarily surface-generated communication in increasing wind speeds and background noise levels, though kept both signal types in their repertoire. Vocal signals have the advantage of having higher information content but may have the disadvantage of loosing this information in a noisy environment. Surface-generated sounds have energy distributed over a greater frequency range and may be less likely to become confused in periods of high wind-generated noise but have less information content when compared with vocal sounds. Therefore, surface-generated sounds may improve detection or enhance the perception of vocal signals in a noisy environment.

Fisheye-Based Method for GPS Localization Improvement in Unknown Semi-Obstructed Areas

PubMed Central

Moreau, Julien; Ambellouis, Sébastien; Ruichek, Yassine

2017-01-01

A precise GNSS (Global Navigation Satellite System) localization is vital for autonomous road vehicles, especially in cluttered or urban environments where satellites are occluded, preventing accurate positioning. We propose to fuse GPS (Global Positioning System) data with fisheye stereovision to face this problem independently to additional data, possibly outdated, unavailable, and needing correlation with reality. Our stereoscope is sky-facing with 360° × 180° fisheye cameras to observe surrounding obstacles. We propose a 3D modelling and plane extraction through following steps: stereoscope self-calibration for decalibration robustness, stereo matching considering neighbours epipolar curves to compute 3D, and robust plane fitting based on generated cartography and Hough transform. We use these 3D data with GPS raw data to estimate NLOS (Non Line Of Sight) reflected signals pseudorange delay. We exploit extracted planes to build a visibility mask for NLOS detection. A simplified 3D canyon model allows to compute reflections pseudorange delays. In the end, GPS positioning is computed considering corrected pseudoranges. With experimentations on real fixed scenes, we show generated 3D models reaching metric accuracy and improvement of horizontal GPS positioning accuracy by more than 50%. The proposed procedure is effective, and the proposed NLOS detection outperforms CN0-based methods (Carrier-to-receiver Noise density). PMID:28106746

Flight test of a low-altitude helicopter guidance system with obstacle avoidance capability

NASA Technical Reports Server (NTRS)

Zelenka, Richard E.; Clark, Raymond F.; Branigan, Robert G.

1995-01-01

Military aircraft regularly conduct missions that include low-atltitude, near-terrain flight in order to increase covertness and payload effectiveness. Civilian applications include airborne fire fighting, police surveillance, search and rescue, and helicopter emergency medical service. Several fixed-wing aircraft now employ terrain elevation maps and forward-pointed radars to achieve automated terrain following or terrain avoidance flight. Similar systems specialized to helicopters and their flight regime have not received as much attention. A helicopter guidance system relying on digitized terrain elevation maps has been developed that employs airborne navigation, mission requirements, aircraft performance limits, and radar altimeter returns to generate a valley-seeking, low-altitude trajectory between waypoints. The guidance trajectory is symbolically presented to the pilot on a helmet mounted display. This system has been flight tested to 150 ft (45.7 m) above ground level altitude at 80 kts, and is primarily limited by the ability of the pilot to perform manual detection and avoidance of unmapped hazards. In this study, a wide field of view laser radar sensor has been incorporated into this guidance system to assist the pilot in obstacle detection and avoidance, while expanding the system's operational flight envelope. The results from early flight tests of this system are presented. Low-altitude missions to 100 ft (30.5 m) altitude at 80n kts in the presence of unmapped natural and man-made obstacles were demonstrated while the pilot maintained situational awareness and tracking of the guidance trajectory. Further reductions in altitude are expected with continued flight testing.

The effects of multiple obstacles on the locomotor behavior and performance of a terrestrial lizard.

PubMed

Parker, Seth E; McBrayer, Lance D

2016-04-01

Negotiation of variable terrain is important for many small terrestrial vertebrates. Variation in the running surface resulting from obstacles (woody debris, vegetation, rocks) can alter escape paths and running performance. The ability to navigate obstacles likely influences survivorship through predator evasion success and other key ecological tasks (finding mates, acquiring food). Earlier work established that running posture and sprint performance are altered when organisms face an obstacle, and yet studies involving multiple obstacles are limited. Indeed, some habitats are cluttered with obstacles, whereas others are not. For many species, obstacle density may be important in predator escape and/or colonization potential by conspecifics. This study examines how multiple obstacles influence running behavior and locomotor posture in lizards. We predict that an increasing number of obstacles will increase the frequency of pausing and decrease sprint velocity. Furthermore, bipedal running over multiple obstacles is predicted to maintain greater mean sprint velocity compared with quadrupedal running, thereby revealing a potential advantage of bipedalism. Lizards were filmed running through a racetrack with zero, one or two obstacles. Bipedal running posture over one obstacle was significantly faster than quadrupedal posture. Bipedal running trials contained fewer total strides than quadrupedal ones. But on addition of a second obstacle, the number of bipedal strides decreased. Increasing obstacle number led to slower and more intermittent locomotion. Bipedalism provided clear advantages for one obstacle, but was not associated with further benefits for an additional obstacle. Hence, bipedalism helps mitigate obstacle negotiation, but not when numerous obstacles are encountered in succession. © 2016. Published by The Company of Biologists Ltd.