LC-MS/MS-based approach for obtaining exposure estimates of metabolites in early clinical trials using radioactive metabolites as reference standards.

PubMed

Zhang, Donglu; Raghavan, Nirmala; Chando, Theodore; Gambardella, Janice; Fu, Yunlin; Zhang, Duxi; Unger, Steve E; Humphreys, W Griffith

2007-12-01

An LC-MS/MS-based approach that employs authentic radioactive metabolites as reference standards was developed to estimate metabolite exposures in early drug development studies. This method is useful to estimate metabolite levels in studies done with non-radiolabeled compounds where metabolite standards are not available to allow standard LC-MS/MS assay development. A metabolite mixture obtained from an in vivo source treated with a radiolabeled compound was partially purified, quantified, and spiked into human plasma to provide metabolite standard curves. Metabolites were analyzed by LC-MS/MS using the specific mass transitions and an internal standard. The metabolite concentrations determined by this approach were found to be comparable to those determined by valid LC-MS/MS assays. This approach does not requires synthesis of authentic metabolites or the knowledge of exact structures of metabolites, and therefore should provide a useful method to obtain early estimates of circulating metabolites in early clinical or toxicological studies.

An approach to analyzing a single subject's scores obtained in a standardized test with application to the Aachen Aphasia Test (AAT).

PubMed

Willmes, K

1985-08-01

Methods for the analysis of a single subject's test profile(s) proposed by Huber (1973) are applied to the Aachen Aphasia Test (AAT). The procedures are based on the classical test theory model (Lord & Novick, 1968) and are suited for any (achievement) test with standard norms from a large standardization sample and satisfactory reliability estimates. Two test profiles of a Wernicke's aphasic, obtained before and after a 3-month period of speech therapy, are analyzed using inferential comparisons between (groups of) subtest scores on one test application and between two test administrations for single (groups of) subtests. For each of these comparisons, the two aspects of (i) significant (reliable) differences in performance beyond measurement error and (ii) the diagnostic validity of that difference in the reference population of aphasic patients are assessed. Significant differences between standardized subtest scores and a remarkably better preserved reading and writing ability could be found for both test administrations using the multiple test procedure of Holm (1979). Comparison of both profiles revealed an overall increase in performance for each subtest as well as changes in level of performance relations between pairs of subtests.

[Study on the reorganization of standards related to food contact ceramics and porcelains].

PubMed

Zhang, Jianbo; Zhu, Lei; Zhang, Hong; Liu, Shan; Wang, Zhutian

2014-07-01

To solve the problem of overlap, iterance and conflict among current standards related to food contact ceramics and porcelains. To collect all the current standards related to food contact ceramics and porcelains and reorganize them following the settled principles and method and list the standards that need to be revoked, revised, incorporated, or keep valid and excluded from the food safety standard system. 19 standards were collected in this study and reorganized. The main food safety indexes in these standards were the limits for lead and cadmium that released from food contact ceramics and porcelains. There were released limits for lead and cadmium in 10 standards, including 4 horizontal standards and 6 commodity standards. The provisions in these 10 standards were in conflict. And as a result of this, the 4 horizontal standards were suggested to be incorporated and revised to one food safety standard, while the 6 commodity standards were suggested to be revised and exclude the lead and cadmium provisions. Another 7 commodity standards only referenced provisions for lead and cadmium limits from horizontal standards, and these 7 standards were suggested to be excluded from food safety standard system. There were no food safety indexes in 2 standards of the 19 standards, these standards were considered not related to food safety and no need to be reorganized. There were conflicts about the released limits of lead and cadmium among the current standards related to food contact ceramics and porcelains. So, it is necessary to a set up a new food safety standard for released lead and cadmium permissible limits which can apply to all food contact ceramics and porcelains. This food safety standard should be based on food safety risk assessment and the actual situations of manufacture and usage of food contact ceramics and porcelains. The provisions in international standards and relative standards from other countries can also provide references to this standard.

Long-term reproducibility of relative sensitivity factors obtained with CAMECA Wf

NASA Astrophysics Data System (ADS)

Gui, D.; Xing, Z. X.; Huang, Y. H.; Mo, Z. Q.; Hua, Y. N.; Zhao, S. P.; Cha, L. Z.

2008-12-01

As the wafer size continues to increase and the feature size of the integrated circuits (IC) continues to shrink, process control of IC manufacturing becomes ever more important to reduce the cost of failures caused by the drift of processes or equipments. Characterization tools with high precision and reproducibility are required to capture any abnormality of the process. Although Secondary ion mass spectrometry (SIMS) has been widely used in dopant profile control, it was reported that magnetic sector SIMS, compared to quadrupole SIMS, has lower short-term repeatability and long-term reproducibility due to the high extraction field applied between sample and extraction lens. In this paper, we demonstrate that CAMECA Wf can deliver high long-term reproducibility because of its high-level automation and improved design of immersion lens. The relative standard deviation (R.S.D.) of the relative sensitivity factors (RSF) of three typical elements, i.e., boron (B), phosphorous (P) and nitrogen (N), over 3 years are 3.7%, 5.5% and 4.1%, respectively. The high reproducibility results have a practical implication that deviation can be estimated without testing the standards.

Pennsylvania StreamStats--A web-based application for obtaining water-resource-related information

USGS Publications Warehouse

Stuckey, Marla H.; Hoffman, Scott A.

2010-01-01

StreamStats is a national web-based Geographic Information System (GIS) application, developed by the U.S. Geological Survey (USGS), in cooperation with Environmental Systems Research Institute, Inc., to provide a variety of water-resource-related information. Users can easily obtain descriptive information, basin characteristics, and streamflow statistics for USGS streamgages and ungaged stream locations throughout Pennsylvania. StreamStats also allows users to search upstream and (or) downstream from user-selected points to identify locations of and obtain information for water-resource-related activities, such as dams and streamgages.

Early heart rate responses to standardized trauma-related pictures predict posttraumatic stress disorder – a prospective study

PubMed Central

Suendermann, Oliver; Ehlers, Anke; Boellinghaus, Inga; Gamer, Matthias; Glucksman, Edward

2010-01-01

BACKGROUND Trauma survivors with posttraumatic stress disorder (PTSD) report heightened physiological responses to a wide range of stimuli. It has been suggested that associative learning and stimulus generalization play a key role in the development of these symptoms. Some studies have found that trauma survivors with PTSD show greater physiological responses to individualized trauma reminders in the initial weeks after trauma than those without PTSD. This study investigated whether heart rate and skin conductance responses (HRR, SCR) to standardized trauma-related pictures at 1 month after the trauma predict chronic PTSD. METHOD Survivors of motor vehicle accidents or physical assaults (N=166) watched standardized trauma-related, generally threatening and neutral pictures at 1 month post- trauma while their HRR and SCR were recorded. PTSD symptoms were assessed with structured clinical interviews at 1 and 6 months; self-reports of fear responses and dissociation during trauma were obtained soon after the trauma. RESULTS At 1 month, trauma survivors with PTSD showed greater HRR to trauma-related pictures than those without PTSD, but not to general threat or neutral pictures. HRR to trauma-related pictures predicted PTSD severity at 1 and 6 months, and were related to fear and dissociation during trauma. SCR was not related to PTSD. CONCLUSION HRR to standardized trauma reminders at 1 month after the trauma differentiate between trauma survivors with and without PTSD, and predict chronic PTSD. Results are consistent with a role of associative learning in PTSD and suggest that early stimulus generalization may be an indicator of risk for chronic PTSD. PMID:20124426

Vaginismus and dyspareunia: relationship with general and sex-related moral standards.

PubMed

Borg, Charmaine; de Jong, Peter J; Weijmar Schultz, Willibrord

2011-01-01

Relatively strong adherence to conservative values and/or relatively strict sex-related moral standards logically restricts the sexual repertoire and will lower the threshold for experiencing negative emotions in a sexual context. In turn, this may generate withdrawal and avoidance behavior, which is at the nucleus of vaginismus. To examine whether indeed strong adherence to conservative morals and/or strict sexual standards may be involved in vaginismus. The Schwartz Value Survey (SVS) to investigate the individual's value pattern and the Sexual Disgust Questionnaire (SDQ) to index the willingness to perform certain sexual activities as an indirect measure of sex-related moral standards. The SVS and SDQ were completed by three groups: women diagnosed with vaginismus (N=24), a group of women diagnosed with dyspareunia (N=24), and a healthy control group of women without sexual complaints (N=32). Specifically, the vaginismus group showed relatively low scores on liberal values together with comparatively high scores on conservative values. Additionally, the vaginismus group was more restricted in their readiness to perform particular sex-related behaviors than the control group. The dyspareunia group, on both the SVS and the SDQ, placed between the vaginismus and the control group, but not significantly different than either of the groups. The findings are consistent with the view that low liberal and high conservative values, along with restricted sexual standards, are involved in the development/maintenance of vaginismus. © 2010 International Society for Sexual Medicine.

Comparisons of ANS, ASME, AWS, and NFPA standards cited in the NRC standard review plan, NUREG-0800, and related documents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.

This report provides the results of comparisons of the cited and latest versions of ANS, ASME, AWS and NFPA standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC`s Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented.more » Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review.« less

45 CFR 148.170 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Standards relating to benefits for mothers and... to Benefits § 148.170 Standards relating to benefits for mothers and newborns. (a) Hospital length of... in connection with childbirth for a mother or her newborn may not restrict benefits for the stay to...

78 FR 57445 - Charging Standard Administrative Fees for Nonprogram-Related Information

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-18

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2012-0026] Charging Standard Administrative Fees for Nonprogram-Related Information AGENCY: Social Security Administration. ACTION: Notice of standard... administration of a program under the Social Security Act (Act). SUPPLEMENTARY INFORMATION: Section 1106 of the...

45 CFR 146.130 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Standards relating to benefits for mothers and... Benefits § 146.130 Standards relating to benefits for mothers and newborns. (a) Hospital length of stay—(1... stay in connection with childbirth for a mother or her newborn may not restrict benefits for the stay...

29 CFR 2590.711 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Standards relating to benefits for mothers and newborns... Requirements § 2590.711 Standards relating to benefits for mothers and newborns. (a) Hospital length of stay—(1... stay in connection with childbirth for a mother or her newborn may not restrict benefits for the stay...

29 CFR 2590.711 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Standards relating to benefits for mothers and newborns... Requirements § 2590.711 Standards relating to benefits for mothers and newborns. (a) Hospital length of stay—(1... stay in connection with childbirth for a mother or her newborn may not restrict benefits for the stay...

Comparison of visual field test results obtained through Humphrey matrix frequency doubling technology perimetry versus standard automated perimetry in healthy children.

PubMed

Kocabeyoglu, Sibel; Uzun, Salih; Mocan, Mehmet Cem; Bozkurt, Banu; Irkec, Murat; Orhan, Mehmet

2013-10-01

The aim of this study was to compare the visual field test results in healthy children obtained via the Humphrey matrix 24-2 threshold program and standard automated perimetry (SAP) using the Swedish interactive threshold algorithm (SITA)-Standard 24-2 test. This prospective study included 55 healthy children without ocular or systemic disorders who underwent both SAP and frequency doubling technology (FDT) perimetry visual field testing. Visual field test reliability indices, test duration, global indices (mean deviation [MD], and pattern standard deviation [PSD]) were compared between the 2 tests using the Wilcoxon signed-rank test and paired t-test. The performance of the Humphrey field analyzer (HFA) 24-2 SITA-standard and frequency-doubling technology Matrix 24-2 tests between genders were compared with Mann-Whitney U-test. Fifty-five healthy children with a mean age of 12.2 ± 1.9 years (range from 8 years to 16 years) were included in this prospective study. The test durations of SAP and FDT were similar (5.2 ± 0.5 and 5.1 ± 0.2 min, respectively, P = 0.651). MD and the PSD values obtained via FDT Matrix were significantly higher than those obtained via SAP (P < 0.001), and fixation losses and false negative errors were significantly less with SAP (P < 0.05). A weak positive correlation between the two tests in terms of MD (r = 0.352, P = 0.008) and PSD (r = 0.329, P = 0.014) was observed. Children were able to complete both the visual test algorithms successfully within 6 min. However, SAP testing appears to be associated with less depression of the visual field indices of healthy children. FDT Matrix and SAP should not be used interchangeably in the follow-up of children.

46 CFR 188.35-5 - Where obtainable.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Where obtainable. 188.35-5 Section 188.35-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS American Bureau of Shipping's Standards § 188.35-5 Where obtainable. (a) The standards established...

46 CFR 188.35-5 - Where obtainable.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Where obtainable. 188.35-5 Section 188.35-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS American Bureau of Shipping's Standards § 188.35-5 Where obtainable. (a) The standards established...

46 CFR 188.35-5 - Where obtainable.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Where obtainable. 188.35-5 Section 188.35-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS American Bureau of Shipping's Standards § 188.35-5 Where obtainable. (a) The standards established...

46 CFR 188.35-5 - Where obtainable.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Where obtainable. 188.35-5 Section 188.35-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS American Bureau of Shipping's Standards § 188.35-5 Where obtainable. (a) The standards established...

46 CFR 188.35-5 - Where obtainable.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Where obtainable. 188.35-5 Section 188.35-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS American Bureau of Shipping's Standards § 188.35-5 Where obtainable. (a) The standards established...

Towards standard testbeds for numerical relativity

NASA Astrophysics Data System (ADS)

Alcubierre, Miguel; Allen, Gabrielle; Bona, Carles; Fiske, David; Goodale, Tom; Guzmán, F. Siddhartha; Hawke, Ian; Hawley, Scott H.; Husa, Sascha; Koppitz, Michael; Lechner, Christiane; Pollney, Denis; Rideout, David; Salgado, Marcelo; Schnetter, Erik; Seidel, Edward; Shinkai, Hisa-aki; Shoemaker, Deirdre; Szilágyi, Béla; Takahashi, Ryoji; Winicour, Jeff

2004-01-01

In recent years, many different numerical evolution schemes for Einstein's equations have been proposed to address stability and accuracy problems that have plagued the numerical relativity community for decades. Some of these approaches have been tested on different spacetimes, and conclusions have been drawn based on these tests. However, differences in results originate from many sources, including not only formulations of the equations, but also gauges, boundary conditions, numerical methods and so on. We propose to build up a suite of standardized testbeds for comparing approaches to the numerical evolution of Einstein's equations that are designed to both probe their strengths and weaknesses and to separate out different effects, and their causes, seen in the results. We discuss general design principles of suitable testbeds, and we present an initial round of simple tests with periodic boundary conditions. This is a pivotal first step towards building a suite of testbeds to serve the numerical relativists and researchers from related fields who wish to assess the capabilities of numerical relativity codes. We present some examples of how these tests can be quite effective in revealing various limitations of different approaches, and illustrating their differences. The tests are presently limited to vacuum spacetimes, can be run on modest computational resources and can be used with many different approaches used in the relativity community.

The Rhetoric of Arrogance: The Public Relations Response of the Standard Oil Trust.

ERIC Educational Resources Information Center

Boyd, Josh

2001-01-01

Illustrates one of the earliest American public relations debacles (ending in the dissolution of the Standard Oil Trust in 1911). Presents background on Standard Oil and offers an overview Ida Tarbell's influential "History of the Standard Oil company." Argues that Standard failed to respond to these accounts adequately, reinforcing…

Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury.

PubMed

Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

2007-10-01

To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. An interrupted time-series design was used to determine the standard's effect on fatality rates. Machinery-related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout-related fatalities. Linear regression was used to control for changes in demographic and economic factors. The average annual crude rate of machinery-related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non-significant increase of 0.05 deaths per 100 000 production worker full-time equivalents (95% CI -0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery-related fatalities in manufacturing. There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after.

Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury

PubMed Central

Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

2007-01-01

Objective To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. Design An interrupted time‐series design was used to determine the standard's effect on fatality rates. Machinery‐related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout‐related fatalities. Linear regression was used to control for changes in demographic and economic factors. Results The average annual crude rate of machinery‐related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non‐significant increase of 0.05 deaths per 100 000 production worker full‐time equivalents (95% CI −0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery‐related fatalities in manufacturing. Conclusions There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after. PMID:17916891

Concept for an International Standard related to Space Weather Effects on Space Systems

NASA Astrophysics Data System (ADS)

Tobiska, W. Kent; Tomky, Alyssa

There is great interest in developing an international standard related to space weather in order to specify the tools and parameters needed for space systems operations. In particular, a standard is important for satellite operators who may not be familiar with space weather. In addition, there are others who participate in space systems operations that would also benefit from such a document. For example, the developers of software systems that provide LEO satellite orbit determination, radio communication availability for scintillation events (GEO-to-ground L and UHF bands), GPS uncertainties, and the radiation environment from ground-to-space for commercial space tourism. These groups require recent historical data, current epoch specification, and forecast of space weather events into their automated or manual systems. Other examples are national government agencies that rely on space weather data provided by their organizations such as those represented in the International Space Environment Service (ISES) group of 14 national agencies. Designers, manufacturers, and launchers of space systems require real-time, operational space weather parameters that can be measured, monitored, or built into automated systems. Thus, a broad scope for the document will provide a useful international standard product to a variety of engineering and science domains. The structure of the document should contain a well-defined scope, consensus space weather terms and definitions, and internationally accepted descriptions of the main elements of space weather, its sources, and its effects upon space systems. Appendices will be useful for describing expanded material such as guidelines on how to use the standard, how to obtain specific space weather parameters, and short but detailed descriptions such as when best to use some parameters and not others; appendices provide a path for easily updating the standard since the domain of space weather is rapidly changing with new advances

Development of NASA Technical Standards Program Relative to Enhancing Engineering Capabilities

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2003-01-01

The enhancement of engineering capabilities is an important aspect of any organization; especially those engaged in aerospace development activities. Technical Standards are one of the key elements of this endeavor. The NASA Technical Standards Program was formed in 1997 in response to the NASA Administrator s directive to develop an Agencywide Technical Standards Program. The Program s principal objective involved the converting Center-unique technical standards into Agency wide standards and the adoption/endorsement of non-Government technical standards in lieu of government standards. In the process of these actions, the potential for further enhancement of the Agency s engineering capabilities was noted relative to value of being able to access Agencywide the necessary full-text technical standards, standards update notifications, and integration of lessons learned with technical standards, all available to the user from one Website. This was accomplished and is now being enhanced based on feedbacks from the Agency's engineering staff and supporting contractors. This paper addresses the development experiences with the NASA Technical Standards Program and the enhancement of the Agency's engineering capabilities provided by the Program s products. Metrics are provided on significant aspects of the Program.

48 CFR 53.107 - Obtaining forms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 2 2012-10-01 2012-10-01 false Obtaining forms. 53.107 Section 53.107 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS General 53.107 Obtaining forms. (a) Executive agencies shall obtain standard and...

48 CFR 53.107 - Obtaining forms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 2 2013-10-01 2013-10-01 false Obtaining forms. 53.107 Section 53.107 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS General 53.107 Obtaining forms. (a) Executive agencies shall obtain standard and...

48 CFR 53.107 - Obtaining forms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Obtaining forms. 53.107 Section 53.107 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS General 53.107 Obtaining forms. (a) Executive agencies shall obtain standard and...

48 CFR 53.107 - Obtaining forms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false Obtaining forms. 53.107 Section 53.107 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS General 53.107 Obtaining forms. (a) Executive agencies shall obtain standard and...

48 CFR 53.107 - Obtaining forms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false Obtaining forms. 53.107 Section 53.107 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS General 53.107 Obtaining forms. (a) Executive agencies shall obtain standard and...

Viscosity of thickened fluids that relate to the Australian National Standards.

PubMed

Karsten Hadde, Enrico; Ann Yvette Cichero, Julie; Michael Nicholson, Timothy

2016-08-01

In 2007, Australia published standardized terminology and definitions for three levels of thickened fluids used in the management of dysphagia. This study examined the thickness of the current Australian National Fluid Standards rheologically (i.e. viscosity, yield stress) and correlated these results with the "fork test", as described in the national standards. Clinicians who prescribe or work with thickened liquids and laypersons were recruited to categorize 15 different thickened fluids of known viscosities using the fork test. The mean apparent viscosity and the yield stress for each fluid category were calculated. Clear responses were obtained by both clinicians and laypersons for very thin fluids (< 90 mPa.s) and very thick fluids (> 1150 mPa.s), but large variations of responses were seen for intermediate viscosities. Measures of viscosity and yield stress were important in allocating liquids to different categories. Three bands of fluid viscosity with distinct intermediate band gaps and associated yield stress measures were clearly identifiable and are proposed as objective complements to the Australian National Standards. The "fork test" provides rudimentary information about both viscosity and yield stress, but is an inexact measure of both variables.

Association of MCAT scores obtained with standard vs extra administration time with medical school admission, medical student performance, and time to graduation.

PubMed

Searcy, Cynthia A; Dowd, Keith W; Hughes, Michael G; Baldwin, Sean; Pigg, Trey

2015-06-09

Individuals with documented disabilities may receive accommodations on the Medical College Admission Test (MCAT). Whether such accommodations are associated with MCAT scores, medical school admission, and medical school performance is unclear. To determine the comparability of MCAT scores obtained with standard vs extra administration time with respect to likelihood of acceptance to medical school and future medical student performance. Retrospective cohort study of applicants to US medical schools for the 2011-2013 entering classes who reported MCAT scores obtained with standard time (n = 133,962) vs extra time (n = 435), and of students who matriculated in US medical schools from 2000-2004 who reported MCAT scores obtained with standard time (n = 76,262) vs extra time (n = 449). Standard or extra administration time during MCAT. Primary outcome measures were acceptance rates at US medical schools and graduation rates within 4 or 5 years after matriculation. Secondary outcome measures were pass rates on the United States Medical Licensing Examination (USMLE) Step examinations and graduation rates within 6 to 8 years after matriculation. Acceptance rates were not significantly different for applicants who had MCAT scores obtained with standard vs extra time (44.5% [59,585/133,962] vs 43.9% [191/435]; difference, 0.6% [95% CI, -4.1 to 5.3]). Students who tested with extra time passed the Step examinations on first attempt at significantly lower rates (Step 1, 82.1% [344/419] vs 94.0% [70,188/74,668]; difference, 11.9% [95% CI, 9.6% to 14.2%]; Step 2 CK, 85.5% [349/408] vs 95.4% [70,476/73,866]; difference, 9.9% [95% CI, 7.8% to 11.9%]; Step 2 CS, 92.0% [288/313] vs 97.0% [60,039/61,882]; difference, 5.0% [95% CI, 3.1% to 6.9%]). They also graduated from medical school at significantly lower rates at different times (4 years, 67.2% [285/424] vs 86.1% [60,547/70,305]; difference, 18.9% [95% CI, 15.6% to 22.2%]; 5 years, 81.6% [346/424] vs 94.4% [66

A Standardized Interface for Obtaining Digital Planetary and Heliophysics Time Series Data

NASA Astrophysics Data System (ADS)

Vandegriff, Jon; Weigel, Robert; Faden, Jeremy; King, Todd; Candey, Robert

2016-10-01

We describe a low level interface for accessing digital Planetary and Heliophysics data, focusing primarily on time-series data from in-situ instruments. As the volume and variety of planetary data has increased, it has become harder to merge diverse datasets into a common analysis environment. Thus we are building low-level computer-to-computer infrastructure to enable data from different missions or archives to be able to interoperate. The key to enabling interoperability is a simple access interface that standardizes the common capabilities available from any data server: 1. identify the data resources that can be accessed; 2. describe each resource; and 3. get the data from a resource. We have created a standardized way for data servers to perform each of these three activities. We are also developing a standard streaming data format for the actual data content to be returned (i.e., the result of item 3). Our proposed standard access interface is simple enough that it could be implemented on top of or beside existing data services, or it could even be fully implemented by a small data provider as a way to ensure that the provider's holdings can participate in larger data systems or joint analysis with other datasets. We present details of the interface and of the streaming format, including a sample server designed to illustrate the data request and streaming capabilities.

Technical Review of Law Enforcement Standards and Guides Relative to Incident Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stenner, Robert D.; Salter, R.; Stanton, J. R.

2009-03-24

In an effort to locate potential law enforcement-related standards that support incident management, a team from the Pacific Northwest National Laboratory (PNNL) contacted representatives from the National Institute of Standards-Office of Law Enforcement Standards (NIST-OLES), National Institute of Justice (NIJ), Federal Bureau of Investigation (FBI), Secret Service, ASTM International committees that have a law enforcement focus, and a variety of individuals from local and regional law enforcement organizations. Discussions were held with various state and local law enforcement organizations. The NIJ has published several specific equipment-related law enforcement standards that were included in the review, but it appears that lawmore » enforcement program and process-type standards are developed principally by organizations that operate at the state and local level. Input is provided from state regulations and codes and from external non-government organizations (NGOs) that provide national standards. The standards that are adopted from external organizations or developed independently by state authorities are available for use by local law enforcement agencies on a voluntary basis. The extent to which they are used depends on the respective jurisdictions involved. In some instances, use of state and local disseminated standards is mandatory, but in most cases, use is voluntary. Usually, the extent to which these standards are used appears to depend on whether or not jurisdictions receive certification from a “governing” entity due to their use and compliance with the standards. In some cases, these certification-based standards are used in principal but without certification or other compliance monitoring. In general, these standards appear to be routinely used for qualification, selection for employment, and training. In these standards, the term “Peace Officer” is frequently used to refer to law enforcement personnel. This technical review of

Obtaining accreditation by the pharmacy compounding accreditation board, part 2: developing essential standard operating procedures.

PubMed

Cabaleiro, Joe

2007-01-01

A key component of qualifying for accreditation with the Pharmacy Compounding Accreditation Board is having a set of comprehensive standard operating procedures that are being used by the pharmacy staff. The three criteria in standard operating procedures for which the Pharmacy Compounding Accreditation Board looks are: (1)written standard operating procedures; (2)standard operating procedures that reflect what the organization actualy does; and (3) whether the written standard operating procedures are implemented. Following specified steps in the preparation of standard operating procedures will result in procedures that meet Pharmacy Compounding Accreditation Board Requirements, thereby placing pharmacies one step closer to qualifying for accreditation.

Harnessing electronic healthcare data for wound care research: Standards for reporting observational registry data obtained directly from electronic health records.

PubMed

Fife, Caroline E; Eckert, Kristen A

2017-04-01

The United States Food and Drug Administration will consider the expansion of coverage indications for some drugs and devices based on real-world data. Real-world data accrual in patient registries has historically been via manual data entry from the medical chart at a time distant from patient care, which is fraught with systematic error. The efficient automated transmission of data directly from electronic health records is replacing this labor-intensive paradigm. However, real-world data collection is unfamiliar. The potential sources of bias arising from the source of data and data accrual, documentation, and aggregation have not been well defined. Furthermore, the technological aspects of data acquisition and transmission are less transparent. We explore opportunities for harnessing direct-from-electronic health record registry reporting and propose the ABCs of Registries (Analysis of Bias Criteria of Registries), which are an evaluation framework for publications to minimize potential bias of real-world data obtained directly from an electronic health record method. These standards are based on a point-of-care data documentation process using a common definitional framework and data dictionaries. By way of example, we describe a wound registry obtained directly from electronic health records. This qualified clinical data registry minimizes bias by ensuring complete and accurate point-of-care data capture, standardizes usual care linked to quality reporting, and prevents post-hoc vetting of outcomes. The resulting data are of high quality and integrity and can be used for comparative effectiveness research in wound care. In this way, the effort needed to succeed with the Quality Payment Program is leveraged to obtain the real-world data needed for comparative effectiveness research. © 2017 by the Wound Healing Society.

HSE management standards and stress-related work outcomes.

PubMed

Kerr, Robert; McHugh, Marie; McCrory, Mark

2009-12-01

The UK Health and Safety Executive's (HSE) Management Standards (MS) approach has been developed to help organizations manage potential sources of work-related stress. Although there is general support for the assessment model adopted by this approach, to date, there has been no empirical investigation of the relationship between the actual MS (as measured by the final revised version of the HSE Indicator Tool) and stress-related work outcomes. To investigate the relationship between the HSE MS and the following stress-related work outcomes: 'job satisfaction', job-related anxiety and depression and errors/near misses. An anonymous cross-sectional questionnaire was distributed by either e-mail or post to all employees within a community-based Health and Social Services Trust. Respondents completed the HSE Indicator Tool, a job-related anxiety and depression scale, a job satisfaction scale and an aggregated measure of the number of errors/near misses witnessed. Associations between the HSE Indicator Tool responses and stress-related work outcomes were analysed with regression statistics. A total of 707 employees completed the questionnaire, representing a low response rate of 29%. Controlling for age, gender and contract type, the HSE MS (as measured by the HSE Indicator Tool) were positively associated with job satisfaction and negatively associated with 'job-related anxiety', 'job-related depression' and 'witnessed errors/near misses'. This study provides empirical evidence to support the use of the MS approach in tackling workplace stress.

Nursing Home Staffing Standards: Their Relationship to Nurse Staffing Levels

ERIC Educational Resources Information Center

Mueller, Christine; Arling, Greg; Kane, Robert; Bershadsky, Julie; Holland, Diane; Joy, Annika

2006-01-01

Purpose: This study reviews staffing standards from the 50 states and the District of Columbia to determine if these standards are related to nursing home staffing levels. Design and Methods: Rules and regulations for states' nursing home staffing standards were obtained for the 50 states and the District of Columbia. Nurse staffing data were…

12 CFR 335.121 - Listing standards related to audit committees.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Listing standards related to audit committees... audit committees. The provisions of the applicable SEC regulation under section 10(A)(m) of the Exchange Act shall be followed as codified at 17 CFR part 240. [75 FR 73949, Nov. 30, 2010] ...

Hearing Aid–Related Standards and Test Systems

PubMed Central

Ravn, Gert; Preves, David

2015-01-01

Many documents describe standardized methods and standard equipment requirements in the field of audiology and hearing aids. These standards will ensure a uniform level and a high quality of both the methods and equipment used in audiological work. The standards create the basis for measuring performance in a reproducible manner and independent from how and when and by whom parameters have been measured. This article explains, and focuses on, relevant acoustic and electromagnetic compatibility parameters and describes several test systems available. PMID:27516709

The obtaining relative position of lunar centre masses and centre of the figure in selenocentric catalogues

NASA Astrophysics Data System (ADS)

Nefedjev, Yu. A.; Valeev, S. G.; Rizvanov, N. G.; Mikeev, R. R.; Varaksina, N. Yu.

2010-05-01

The relative position of lunar center masses relative to center of the figure in Kazan and Kiev selenocentric catalogues was customized. The expansions by spherical harmonics N=5 degree and order of the lunar function h(λ, β) with using the package ASNI USTU were executed. Module of the expansion of the local area to surfaces to full sphere was used. The parameters of cosmic missions are given for comparison (SAI; Bills, Ferrari). The normalized coefficients from expansions for eight sources hypsometric information are obtained: - Clementine (N=40), - Kazan (N=5), - Kiev (N=5), - SAI (N=10; Chuikova (1975)), - Bills, Ferrari, - Каguуа (Selena, Japan mission), - ULCN (The Uuified Lunaz Control Network 2005). The displacements of the lunar centre figure relative to lunar centre of the masses were defined from equations (Chuikova (1975)). The results of the obtaining relative position of the lunar centre masses and centre of the figure in Kazan selenocentric catalogue give good agreement with modern cosmic mission data.

30 CFR 784.200 - Interpretive rules related to General Performance Standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... RECLAMATION AND OPERATION PLAN § 784.200 Interpretive rules related to General Performance Standards. The... ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL... Surface Mining Reclamation and Enforcement. (a) Interpretation of § 784.15: Reclamation plan: Postmining...

External Standards or Standard Addition? Selecting and Validating a Method of Standardization

NASA Astrophysics Data System (ADS)

Harvey, David T.

2002-05-01

A common feature of many problem-based laboratories in analytical chemistry is a lengthy independent project involving the analysis of "real-world" samples. Students research the literature, adapting and developing a method suitable for their analyte, sample matrix, and problem scenario. Because these projects encompass the complete analytical process, students must consider issues such as obtaining a representative sample, selecting a method of analysis, developing a suitable standardization, validating results, and implementing appropriate quality assessment/quality control practices. Most textbooks and monographs suitable for an undergraduate course in analytical chemistry, however, provide only limited coverage of these important topics. The need for short laboratory experiments emphasizing important facets of method development, such as selecting a method of standardization, is evident. The experiment reported here, which is suitable for an introductory course in analytical chemistry, illustrates the importance of matrix effects when selecting a method of standardization. Students also learn how a spike recovery is used to validate an analytical method, and obtain a practical experience in the difference between performing an external standardization and a standard addition.

Citizenship, Multicultural, and Human Relations Education. Minimum Standards Leadership Series, 1985.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Elementary and Secondary Education.

Minimum standards for elementary and secondary schools require that courses of study provide for the following topics: citizenship, human relations education, and multicultural education. It is educationally profitable to view these as three interdependent perspectives which shape a citizen's participation in democratic life. Cultivating these…

76 FR 41929 - Patient Protection and Affordable Care Act; Standards Related to Reinsurance, Risk Corridors and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-15

... 153 Patient Protection and Affordable Care Act; Standards Related to Reinsurance, Risk Corridors and Risk Adjustment; Proposed Rule #0;#0;Federal Register / Vol. 76 , No. 136 / Friday, July 15, 2011...] RIN 0938-AR07 Patient Protection and Affordable Care Act; Standards Related to Reinsurance, Risk...

Standards-Based External Exams and Students' Science-Related Career Expectations: An International Perspective

ERIC Educational Resources Information Center

Han, Seong Won

2016-01-01

Students' science-related career expectations are important for predicting their future science, technology, engineering, and mathematics (STEM)-related educational and occupational attainments. This study examines the degree to which standards-based external examinations are associated with a student's propensity for pursuing science-related…

76 FR 50117 - Commission Rules and Forms Related to the FASB's Accounting Standards Codification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

... [Release Nos. 33-9250; 34-65052; IC-29748] Commission Rules and Forms Related to the FASB's Accounting... Accounting Standards Codification\\TM\\ (``FASB Codification'').\\1\\ The technical amendments include revision... prescribed under the Securities Act, Exchange Act and Investment Company Act. \\1\\ ``FASB Accounting Standards...

Directly relating gas-phase cluster measurements to solution-phase hydrolysis, the absolute standard hydrogen electrode potential, and the absolute proton solvation energy.

PubMed

Donald, William A; Leib, Ryan D; O'Brien, Jeremy T; Williams, Evan R

2009-06-08

Solution-phase, half-cell potentials are measured relative to other half-cell potentials, resulting in a thermochemical ladder that is anchored to the standard hydrogen electrode (SHE), which is assigned an arbitrary value of 0 V. A new method for measuring the absolute SHE potential is demonstrated in which gaseous nanodrops containing divalent alkaline-earth or transition-metal ions are reduced by thermally generated electrons. Energies for the reactions 1) M(H(2)O)(24)(2+)(g) + e(-)(g)-->M(H(2)O)(24)(+)(g) and 2) M(H(2)O)(24)(2+)(g) + e(-)(g)-->MOH(H(2)O)(23)(+)(g) + H(g) and the hydrogen atom affinities of MOH(H(2)O)(23)(+)(g) are obtained from the number of water molecules lost through each pathway. From these measurements on clusters containing nine different metal ions and known thermochemical values that include solution hydrolysis energies, an average absolute SHE potential of +4.29 V vs. e(-)(g) (standard deviation of 0.02 V) and a real proton solvation free energy of -265 kcal mol(-1) are obtained. With this method, the absolute SHE potential can be obtained from a one-electron reduction of nanodrops containing divalent ions that are not observed to undergo one-electron reduction in aqueous solution.

Directly Relating Gas-Phase Cluster Measurements to Solution-Phase Hydrolysis, the Absolute Standard Hydrogen Electrode Potential, and the Absolute Proton Solvation Energy

PubMed Central

Donald, William A.; Leib, Ryan D.; O’Brien, Jeremy T.; Williams, Evan R.

2009-01-01

Solution-phase, half-cell potentials are measured relative to other half-cell potentials, resulting in a thermochemical ladder that is anchored to the standard hydrogen electrode (SHE), which is assigned an arbitrary value of 0 V. A new method for measuring the absolute SHE potential is demonstrated in which gaseous nanodrops containing divalent alkaline-earth or transition-metal ions are reduced by thermally generated electrons. Energies for the reactions 1) M-(H2O)242+(g)+e−(g)→M(H2O)24+(g) and 2) M(H2O)242+(g)+e−(g)→MOH(H2O)23+(g)+H(g) and the hydrogen atom affinities of MOH(H2O)23+(g) are obtained from the number of water molecules lost through each pathway. From these measurements on clusters containing nine different metal ions and known thermochemical values that include solution hydrolysis energies, an average absolute SHE potential of +4.29 V vs. e−(g) (standard deviation of 0.02 V) and a real proton solvation free energy of −265 kcal mol−1 are obtained. With this method, the absolute SHE potential can be obtained from a one-electron reduction of nanodrops containing divalent ions that are not observed to undergo one-electron reduction in aqueous solution. PMID:19440999

Standard line slopes as a measure of a relative matrix effect in quantitative HPLC-MS bioanalysis.

PubMed

Matuszewski, B K

2006-01-18

A simple experimental approach for studying and identifying the relative matrix effect (for example "plasma-to-plasma" and/or "urine-to-urine") in quantitative analyses by HPLC-MS/MS is described. Using as a database a large number of examples of methods developed in recent years in our laboratories, the relationship between the precision of standard line slopes constructed in five different lots of a biofluid (for example plasma) and the reliability of determination of concentration of an analyte in a particular plasma lot (or subject) was examined. In addition, the precision of standard line slopes was compared when stable isotope-labeled analytes versus analogs were used as internal standards (IS). Also, in some cases, a direct comparison of standard line slopes was made when different HPLC-MS interfaces (APCI versus ESI) were used for the assay of the same compound, using the same IS and the same sample preparation and chromatographic separation conditions. In selected cases, the precision of standard line slopes in five different lots of a biofluid was compared with precision values determined five times in a single lot. The results of these studies indicated that the variability of standard line slopes in different lots of a biofluid [precision of standard line slopes expressed as coefficient of variation, CV (%)] may serve as a good indicator of a relative matrix effect and, it is suggested, this precision value should not exceed 3-4% for the method to be considered reliable and free from the relative matrix effect liability. Based on the results presented, in order to assess the relative matrix effect in bioanalytical methods, it is recommended to perform assay precision and accuracy determination in five different lots of a biofluid, instead of repeat (n=5) analysis in the same, single biofluid lot, calculate standard line slopes and precision of these slopes, and to use <3-4% slope precision value as a guide for method applicability to support clinical

Incident CTS in a large pooled cohort study: associations obtained by a Job Exposure Matrix versus associations obtained from observed exposures.

PubMed

Dale, Ann Marie; Ekenga, Christine C; Buckner-Petty, Skye; Merlino, Linda; Thiese, Matthew S; Bao, Stephen; Meyers, Alysha Rose; Harris-Adamson, Carisa; Kapellusch, Jay; Eisen, Ellen A; Gerr, Fred; Hegmann, Kurt T; Silverstein, Barbara; Garg, Arun; Rempel, David; Zeringue, Angelique; Evanoff, Bradley A

2018-03-29

There is growing use of a job exposure matrix (JEM) to provide exposure estimates in studies of work-related musculoskeletal disorders; few studies have examined the validity of such estimates, nor did compare associations obtained with a JEM with those obtained using other exposures. This study estimated upper extremity exposures using a JEM derived from a publicly available data set (Occupational Network, O*NET), and compared exposure-disease associations for incident carpal tunnel syndrome (CTS) with those obtained using observed physical exposure measures in a large prospective study. 2393 workers from several industries were followed for up to 2.8 years (5.5 person-years). Standard Occupational Classification (SOC) codes were assigned to the job at enrolment. SOC codes linked to physical exposures for forceful hand exertion and repetitive activities were extracted from O*NET. We used multivariable Cox proportional hazards regression models to describe exposure-disease associations for incident CTS for individually observed physical exposures and JEM exposures from O*NET. Both exposure methods found associations between incident CTS and exposures of force and repetition, with evidence of dose-response. Observed associations were similar across the two methods, with somewhat wider CIs for HRs calculated using the JEM method. Exposures estimated using a JEM provided similar exposure-disease associations for CTS when compared with associations obtained using the 'gold standard' method of individual observation. While JEMs have a number of limitations, in some studies they can provide useful exposure estimates in the absence of individual-level observed exposures. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Relating Standardized Visual Perception Measures to Simulator Visual System Performance

NASA Technical Reports Server (NTRS)

Kaiser, Mary K.; Sweet, Barbara T.

2013-01-01

Human vision is quantified through the use of standardized clinical vision measurements. These measurements typically include visual acuity (near and far), contrast sensitivity, color vision, stereopsis (a.k.a. stereo acuity), and visual field periphery. Simulator visual system performance is specified in terms such as brightness, contrast, color depth, color gamut, gamma, resolution, and field-of-view. How do these simulator performance characteristics relate to the perceptual experience of the pilot in the simulator? In this paper, visual acuity and contrast sensitivity will be related to simulator visual system resolution, contrast, and dynamic range; similarly, color vision will be related to color depth/color gamut. Finally, we will consider how some characteristics of human vision not typically included in current clinical assessments could be used to better inform simulator requirements (e.g., relating dynamic characteristics of human vision to update rate and other temporal display characteristics).

78 FR 67210 - Charging Standard Administrative Fees for Nonprogram-Related Information; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2012-0026] Charging Standard Administrative Fees for Nonprogram-Related Information; Correction AGENCY: Social Security Administration. ACTION: Notice... Social Security Administration published a document in the Federal Register of September 18, 2013...

Adolescents' Motivation for Reading: Group Differences and Relation to Standardized Achievement

ERIC Educational Resources Information Center

Wolters, Christopher A.; Denton, Carolyn A.; York, Mary J.; Francis, David J.

2014-01-01

The purpose of this study was to extend the research on adolescents' motivation for reading by examining important group differences and the relation of motivation to standardized achievement. Adolescents (N = 406) ranging from grade 7 to grade 12 completed a self-report survey that assessed 13 different aspects of their reading motivation…

42 CFR 431.610 - Relations with standard-setting and survey agencies.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and suppliers of services to participate in Medicare (see 42 CFR 405.1902). The requirement for... 42 Public Health 4 2012-10-01 2012-10-01 false Relations with standard-setting and survey agencies... specified in § 488.308 of this chapter. (3) Have qualified personnel perform on-site inspections— (i) At...

42 CFR 431.610 - Relations with standard-setting and survey agencies.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and suppliers of services to participate in Medicare (see 42 CFR 405.1902). The requirement for... 42 Public Health 4 2010-10-01 2010-10-01 false Relations with standard-setting and survey agencies... compliance question; and (ii) For non-State operated NFs, within the timeframes specified in § 488.308 of...

42 CFR 431.610 - Relations with standard-setting and survey agencies.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and suppliers of services to participate in Medicare (see 42 CFR 405.1902). The requirement for... 42 Public Health 4 2013-10-01 2013-10-01 false Relations with standard-setting and survey agencies... specified in § 488.308 of this chapter. (3) Have qualified personnel perform on-site inspections— (i) At...

42 CFR 431.610 - Relations with standard-setting and survey agencies.

Code of Federal Regulations, 2011 CFR

2011-10-01

... and suppliers of services to participate in Medicare (see 42 CFR 405.1902). The requirement for... 42 Public Health 4 2011-10-01 2011-10-01 false Relations with standard-setting and survey agencies... compliance question; and (ii) For non-State operated NFs, within the timeframes specified in § 488.308 of...

42 CFR 431.610 - Relations with standard-setting and survey agencies.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and suppliers of services to participate in Medicare (see 42 CFR 405.1902). The requirement for... 42 Public Health 4 2014-10-01 2014-10-01 false Relations with standard-setting and survey agencies... specified in § 488.308 of this chapter. (3) Have qualified personnel perform on-site inspections— (i) At...

Do U Txt? Event-Related Potentials to Semantic Anomalies in Standard and Texted English

ERIC Educational Resources Information Center

Berger, Natalie I.; Coch, Donna

2010-01-01

Texted English is a hybrid, technology-based language derived from standard English modified to facilitate ease of communication via instant and text messaging. We compared semantic processing of texted and standard English sentences by recording event-related potentials in a classic semantic incongruity paradigm designed to elicit an N400 effect.…

Deriving environmental quality standards for perfluorooctanoic acid (PFOA) and related short chain perfluorinated alkyl acids.

PubMed

Valsecchi, Sara; Conti, Daniela; Crebelli, Riccardo; Polesello, Stefano; Rusconi, Marianna; Mazzoni, Michela; Preziosi, Elisabetta; Carere, Mario; Lucentini, Luca; Ferretti, Emanuele; Balzamo, Stefania; Simeone, Maria Gabriella; Aste, Fiorella

2017-02-05

The evidence that in Northern Italy significant sources of perfluoroalkylacids (PFAA) are present induced the Italian government to establish a Working Group on Environmental Quality Standard (EQS) for PFAA in order to include some of them in the list of national specific pollutants for surface water monitoring according to the Water Framework Directive (2000/60/EC). The list of substances included perfluorooctanoate (PFOA) and related short chain PFAA such as perfluorobutanoate (PFBA), perfluoropentanoate (PFPeA), perfluorohexanoate (PFHxA) and perfluorobutanesulfonate (PFBS), which is a substitute of perfluorooctanesulfonate. For each of them a dossier collects available data on regulation, physico-chemical properties, emission and sources, occurrence, acute and chronic toxicity on aquatic species and mammals, including humans. Quality standards (QS) were derived for the different protection objectives (pelagic and benthic communities, predators by secondary poisoning, human health via consumption of fishery products and water) according to the European guideline. The lowest QS is finally chosen as the relevant EQS. For PFOA a QS for biota was derived for protection from secondary poisoning and the corresponding QS for water was back-calculated, obtaining a freshwater EQS of 0.1μgL -1 . For PFBA, PFPeA, PFHxA and PFBS threshold limits proposed for drinking waters were adopted as EQS. Copyright © 2016 Elsevier B.V. All rights reserved.

7 CFR 75.9 - Who may obtain service.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Who may obtain service. 75.9 Section 75.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND...

7 CFR 75.9 - Who may obtain service.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Who may obtain service. 75.9 Section 75.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND...

7 CFR 75.9 - Who may obtain service.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Who may obtain service. 75.9 Section 75.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND...

7 CFR 75.9 - Who may obtain service.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Who may obtain service. 75.9 Section 75.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND...

7 CFR 75.9 - Who may obtain service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Who may obtain service. 75.9 Section 75.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND...

Development of a Method to Obtain More Accurate General and Oral Health Related Information Retrospectively

PubMed Central

A, Golkari; A, Sabokseir; D, Blane; A, Sheiham; RG, Watt

2017-01-01

Statement of Problem: Early childhood is a crucial period of life as it affects one’s future health. However, precise data on adverse events during this period is usually hard to access or collect, especially in developing countries. Objectives: This paper first reviews the existing methods for retrospective data collection in health and social sciences, and then introduces a new method/tool for obtaining more accurate general and oral health related information from early childhood retrospectively. Materials and Methods: The Early Childhood Events Life-Grid (ECEL) was developed to collect information on the type and time of health-related adverse events during the early years of life, by questioning the parents. The validity of ECEL and the accuracy of information obtained by this method were assessed in a pilot study and in a main study of 30 parents of 8 to 11 year old children from Shiraz (Iran). Responses obtained from parents using the final ECEL were compared with the recorded health insurance documents. Results: There was an almost perfect agreement between the health insurance and ECEL data sets (Kappa value=0.95 and p < 0.001). Interviewees remembered the important events more accurately (100% exact timing match in case of hospitalization). Conclusions: The Early Childhood Events Life-Grid method proved to be highly accurate when compared with recorded medical documents. PMID:28959773

Measuring relative performance of an EDS detector using a NiO standard.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sugar, Joshua Daniel; Kotula, Paul Gabriel

2013-09-01

A method for measuring the relative performance of energy dispersive spectrometers (EDS) on a TEM is discussed. A NiO thin-film standard fabricated at Sandia CA is used. A performance parameter,, is measured and compared to values on several TEM systems.

77 FR 72781 - Standards Improvement Project-Phase IV

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-06

... prepare and maintain written training-certification records for personal protective equipment, revised... revising the standards related to fit testing personal protective equipment, notably Sec. Sec. 1926.103 and... requirement to certify personal protective equipment (PPE) training. OSHA concluded that it could obtain the...

Challenging the 3.0 GPA Eligibility Standard for Public Relations Internships.

ERIC Educational Resources Information Center

Maynard, Michael L.

1999-01-01

Analyzes the appropriateness of a 3.0 GPA standard for public relations internship eligibility at one university. Seeks to determine at what GPA cutoff faculty can feel confident that the student will gain from the internship without damaging the program's reputation. Finds students with a 2.7 GPA did as well as students with GPAs ranging from 3.0…

Determining a one-tailed upper limit for future sample relative reproducibility standard deviations.

PubMed

McClure, Foster D; Lee, Jung K

2006-01-01

A formula was developed to determine a one-tailed 100p% upper limit for future sample percent relative reproducibility standard deviations (RSD(R),%= 100s(R)/y), where S(R) is the sample reproducibility standard deviation, which is the square root of a linear combination of the sample repeatability variance (s(r)2) plus the sample laboratory-to-laboratory variance (s(L)2), i.e., S(R) = s(L)2, and y is the sample mean. The future RSD(R),% is expected to arise from a population of potential RSD(R),% values whose true mean is zeta(R),% = 100sigmaR, where sigmaR and mu are the population reproducibility standard deviation and mean, respectively.

Assessing oral health-related quality of life in children and adolescents: a systematic review and standardized comparison of available instruments.

PubMed

Zaror, Carlos; Pardo, Yolanda; Espinoza-Espinoza, Gerardo; Pont, Àngels; Muñoz-Millán, Patricia; Martínez-Zapata, María José; Vilagut, Gemma; Forero, Carlos G; Garin, Olatz; Alonso, Jordi; Ferrer, Montse

2018-03-22

To obtain a systematic and standardized evaluation of the current evidence on development process, metric properties, and administration issues of oral health-related quality of life instruments available for children and adolescents. A systematic search until October 2016 was conducted in PubMed, Embase, Lilacs, SciELO, and Cochrane databases. Articles with information regarding the development process, metric properties, and administration issues of pediatric instruments measuring oral health-related quality of life were eligible for inclusion. Two researchers independently evaluated each instrument applying the Evaluating Measures of Patient-Reported Outcomes (EMPRO) tool. An overall and seven attribute-specific EMPRO scores were calculated (range 0-100, worst to best): measurement model, reliability, validity, responsiveness, interpretability, burden, and alternative forms. We identified 18 instruments evaluated in 132 articles. From five instruments designed for preschoolers, the Early Childhood Oral Health Impact Scale (ECOHIS) obtained the highest overall EMPRO score (82.2). Of nine identified for schoolchildren and adolescents, the best rated instrument was the Child Perceptions Questionnaire 11-14 (82.1). Among the four instruments developed for any age, the Family Impact Scale (FIS) obtained the highest scores (80.3). The evidence supports the use of the ECOHIS for preschoolers, while the age is a key factor when choosing among the four recommended instruments for schoolchildren and adolescents. Instruments for specific conditions, symptoms, or treatments need further research on metric properties. Our results facilitate decision-making on the correct oral health-related quality of life instrument selection for any certain study purpose and population during the childhood and adolescence life cycle.

Relationship between non-standard work arrangements and work-related accident absence in Belgium

PubMed Central

Alali, Hanan; Braeckman, Lutgart; Van Hecke, Tanja; De Clercq, Bart; Janssens, Heidi; Wahab, Magd Abdel

2017-01-01

Objectives: The main objective of this study is to examine the relationship between indicators of non-standard work arrangements, including precarious contract, long working hours, multiple jobs, shift work, and work-related accident absence, using a representative Belgian sample and considering several socio-demographic and work characteristics. Methods: This study was based on the data of the fifth European Working Conditions Survey (EWCS). For the analysis, the sample was restricted to 3343 respondents from Belgium who were all employed workers. The associations between non-standard work arrangements and work-related accident absence were studied with multivariate logistic regression modeling techniques while adjusting for several confounders. Results: During the last 12 months, about 11.7% of workers were absent from work because of work-related accident. A multivariate regression model showed an increased injury risk for those performing shift work (OR 1.546, 95% CI 1.074-2.224). The relationship between contract type and occupational injuries was not significant (OR 1.163, 95% CI 0.739-1.831). Furthermore, no statistically significant differences were observed for those performing long working hours (OR 1.217, 95% CI 0.638-2.321) and those performing multiple jobs (OR 1.361, 95% CI 0.827-2.240) in relation to work-related accident absence. Those who rated their health as bad, low educated workers, workers from the construction sector, and those exposed to biomechanical exposure (BM) were more frequent victims of work-related accident absence. No significant gender difference was observed. Conclusion: Indicators of non-standard work arrangements under this study, except shift work, were not significantly associated with work-related accident absence. To reduce the burden of occupational injuries, not only risk reduction strategies and interventions are needed but also policy efforts are to be undertaken to limit shift work. In general, preventive measures and

Relationship between non-standard work arrangements and work-related accident absence in Belgium.

PubMed

Alali, Hanan; Braeckman, Lutgart; Van Hecke, Tanja; De Clercq, Bart; Janssens, Heidi; Wahab, Magd Abdel

2017-03-28

The main objective of this study is to examine the relationship between indicators of non-standard work arrangements, including precarious contract, long working hours, multiple jobs, shift work, and work-related accident absence, using a representative Belgian sample and considering several socio-demographic and work characteristics. This study was based on the data of the fifth European Working Conditions Survey (EWCS). For the analysis, the sample was restricted to 3343 respondents from Belgium who were all employed workers. The associations between non-standard work arrangements and work-related accident absence were studied with multivariate logistic regression modeling techniques while adjusting for several confounders. During the last 12 months, about 11.7% of workers were absent from work because of work-related accident. A multivariate regression model showed an increased injury risk for those performing shift work (OR 1.546, 95% CI 1.074-2.224). The relationship between contract type and occupational injuries was not significant (OR 1.163, 95% CI 0.739-1.831). Furthermore, no statistically significant differences were observed for those performing long working hours (OR 1.217, 95% CI 0.638-2.321) and those performing multiple jobs (OR 1.361, 95% CI 0.827-2.240) in relation to work-related accident absence. Those who rated their health as bad, low educated workers, workers from the construction sector, and those exposed to biomechanical exposure (BM) were more frequent victims of work-related accident absence. No significant gender difference was observed. Indicators of non-standard work arrangements under this study, except shift work, were not significantly associated with work-related accident absence. To reduce the burden of occupational injuries, not only risk reduction strategies and interventions are needed but also policy efforts are to be undertaken to limit shift work. In general, preventive measures and more training on the job are needed to

Penguin-like diagrams from the standard model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ping, Chia Swee

2015-04-24

The Standard Model is highly successful in describing the interactions of leptons and quarks. There are, however, rare processes that involve higher order effects in electroweak interactions. One specific class of processes is the penguin-like diagram. Such class of diagrams involves the neutral change of quark flavours accompanied by the emission of a gluon (gluon penguin), a photon (photon penguin), a gluon and a photon (gluon-photon penguin), a Z-boson (Z penguin), or a Higgs-boson (Higgs penguin). Such diagrams do not arise at the tree level in the Standard Model. They are, however, induced by one-loop effects. In this paper, wemore » present an exact calculation of the penguin diagram vertices in the ‘tHooft-Feynman gauge. Renormalization of the vertex is effected by a prescription by Chia and Chong which gives an expression for the counter term identical to that obtained by employing Ward-Takahashi identity. The on-shell vertex functions for the penguin diagram vertices are obtained. The various penguin diagram vertex functions are related to one another via Ward-Takahashi identity. From these, a set of relations is obtained connecting the vertex form factors of various penguin diagrams. Explicit expressions for the gluon-photon penguin vertex form factors are obtained, and their contributions to the flavor changing processes estimated.« less

NASA hydrogen maser accuracy and stability in relation to world standards

NASA Technical Reports Server (NTRS)

Peters, H. E.; Percival, D. B.

1973-01-01

Frequency comparisons were made among five NASA hydrogen masers in 1969 and again in 1972 to a precision of one part in 10 to the 13th power. Frequency comparisons were also made between these masers and the cesium-beam ensembles of several international standards laboratories. The hydrogen maser frequency stabilities as related to IAT were comparable to the frequency stabilities of individual time scales with respect to IAT. The relative frequency variations among the NASA masers, measured after the three-year interval, were 2 + or - 2 parts in 10 to the 13th power. Thus time scales based on hydrogen masers would have excellent long-term stability and uniformity.

7 CFR 75.35 - Obtaining samples for lot inspections.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Obtaining samples for lot inspections. 75.35 Section 75.35 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING...

7 CFR 75.35 - Obtaining samples for lot inspections.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Obtaining samples for lot inspections. 75.35 Section 75.35 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING...

7 CFR 75.35 - Obtaining samples for lot inspections.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Obtaining samples for lot inspections. 75.35 Section 75.35 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING...

[Supervision, administration and standard research related to tissue engineered medical products].

PubMed

Xi, Ting-fei; Chen, Liang; Zhao, Peng

2003-11-01

Tissue engineering advance in supplying the reparative and reconstructive medicine with promising tissue engineered medical products(TEMPs) and the new therapy alternative. The related supervision and administration of TEMPs is being developed and the standard research of TEMPs is also in progress. The Food and Drug Administration(FDA) of the United States has treated TEMPs as combined products and supervised them according to the level of risk to patients. Lately, FDA has determined that the Center for Devices and Radiological Health (CDRH) should take charge of examination and approval of TEMPs, with the cooperation of the Center for Biological Evaluations and Research(CBER). The regulatory controls have been established respectively in European Union and Japan. In China, TEMPs are identified as medical devices combined with cells. The Department of Medical Device of the State Food and Drug Administration (SFDA) is responsible for the examination and approval of TEMPs, and National Institute for the Control of Pharmaceutical & Biological Products(NICPBP) is responsible for evaluation tests. The standards of TEMPs are formulated mainly by the American Society of Testing Materials(ASTM) and International Standardization Organization(ISO).

Standardized versus custom parenteral nutrition: impact on clinical and cost-related outcomes.

PubMed

Blanchette, Lisa M; Huiras, Paul; Papadopoulos, Stella

2014-01-15

Results of a study comparing clinical and cost outcomes with the use of standardized versus custom-prepared parenteral nutrition (PN) in an acute care setting are reported. In a retrospective pre-post analysis, nutritional target attainment, electrolyte abnormalities, and other outcomes were compared in patients 15 years of age or older who received custom PN (n = 49) or a standardized PN product (n = 57) for at least 72 hours at a large medical center over a 13-month period; overall, 45% of the cases were intensive care unit (ICU) admissions. A time-and-motion assessment was conducted to determine PN preparation times. There were no significant between-group differences in the percentage of patients who achieved estimated caloric requirements or in mean ICU or hospital length of stay. However, patients who received standardized PN were significantly less likely than those who received custom PN to achieve the highest protein intake goal (63% versus 92%, p = 0.003) and more likely to develop hyponatremia (37% versus 14%, p = 0.01). Pharmacy preparation times averaged 20 minutes for standardized PN and 80 minutes for custom PN; unit costs were $61.06 and $57.84, respectively. A standardized PN formulation was as effective as custom PN in achieving estimated caloric requirements, but it was relatively less effective in achieving 90% of estimated protein requirements and was associated with a higher frequency of hyponatremia. The standardized PN product may be a cost-effective formulation for institutions preparing an average of five or fewer PN orders per day.

Tibiofemoral wear in standard and non-standard squat: implication for total knee arthroplasty.

PubMed

Fekete, Gusztáv; Sun, Dong; Gu, Yaodong; Neis, Patric Daniel; Ferreira, Ney Francisco; Innocenti, Bernardo; Csizmadia, Béla M

2017-01-01

Due to the more resilient biomaterials, problems related to wear in total knee replacements (TKRs) have decreased but not disappeared. In the design-related factors, wear is still the second most important mechanical factor that limits the lifetime of TKRs and it is also highly influenced by the local kinematics of the knee. During wear experiments, constant load and slide-roll ratio is frequently applied in tribo-tests beside other important parameters. Nevertheless, numerous studies demonstrated that constant slide-roll ratio is not accurate approach if TKR wear is modelled, while instead of a constant load, a flexion-angle dependent tibiofemoral force should be involved into the wear model to obtain realistic results. A new analytical wear model, based upon Archard's law, is introduced, which can determine the effect of the tibiofemoral force and the varying slide-roll on wear between the tibiofemoral connection under standard and non-standard squat movement. The calculated total wear with constant slide-roll during standard squat was 5.5 times higher compared to the reference value, while if total wear includes varying slide-roll during standard squat, the calculated wear was approximately 6.25 times higher. With regard to non-standard squat, total wear with constant slide-roll during standard squat was 4.16 times higher than the reference value. If total wear included varying slide-roll, the calculated wear was approximately 4.75 times higher. It was demonstrated that the augmented force parameter solely caused 65% higher wear volume while the slide-roll ratio itself increased wear volume by 15% higher compared to the reference value. These results state that the force component has the major effect on wear propagation while non-standard squat should be proposed for TKR patients as rehabilitation exercise.

Tibiofemoral wear in standard and non-standard squat: implication for total knee arthroplasty

PubMed Central

Sun, Dong; Gu, Yaodong; Neis, Patric Daniel; Ferreira, Ney Francisco; Innocenti, Bernardo; Csizmadia, Béla M.

2017-01-01

Summary Introduction Due to the more resilient biomaterials, problems related to wear in total knee replacements (TKRs) have decreased but not disappeared. In the design-related factors, wear is still the second most important mechanical factor that limits the lifetime of TKRs and it is also highly influenced by the local kinematics of the knee. During wear experiments, constant load and slide-roll ratio is frequently applied in tribo-tests beside other important parameters. Nevertheless, numerous studies demonstrated that constant slide-roll ratio is not accurate approach if TKR wear is modelled, while instead of a constant load, a flexion-angle dependent tibiofemoral force should be involved into the wear model to obtain realistic results. Methods A new analytical wear model, based upon Archard’s law, is introduced, which can determine the effect of the tibiofemoral force and the varying slide-roll on wear between the tibiofemoral connection under standard and non-standard squat movement. Results The calculated total wear with constant slide-roll during standard squat was 5.5 times higher compared to the reference value, while if total wear includes varying slide-roll during standard squat, the calculated wear was approximately 6.25 times higher. With regard to non-standard squat, total wear with constant slide-roll during standard squat was 4.16 times higher than the reference value. If total wear included varying slide-roll, the calculated wear was approximately 4.75 times higher. Conclusions It was demonstrated that the augmented force parameter solely caused 65% higher wear volume while the slide-roll ratio itself increased wear volume by 15% higher compared to the reference value. These results state that the force component has the major effect on wear propagation while non-standard squat should be proposed for TKR patients as rehabilitation exercise. PMID:29721453

Biases and Standard Errors of Standardized Regression Coefficients

ERIC Educational Resources Information Center

Yuan, Ke-Hai; Chan, Wai

2011-01-01

The paper obtains consistent standard errors (SE) and biases of order O(1/n) for the sample standardized regression coefficients with both random and given predictors. Analytical results indicate that the formulas for SEs given in popular text books are consistent only when the population value of the regression coefficient is zero. The sample…

The consistency of standard cosmology and the BATSE number versus brightness relation

NASA Technical Reports Server (NTRS)

Wickramasinghe, W. A. D. T.; Nemiroff, R. J.; Norris, J. P.; Kouveliotou, C.; Fishman, G. J.; Meegan, C. A.; Wilson, R. B.; Paciesas, W. S.

1993-01-01

The integrated number-peak-flux relation measured by the Burst and Transient Source Experiment (BATSE) on board the Compton Gamma Ray Observatory is compared with several standard cosmological distributions for gamma-ray bursts (GRBs). Friedmann-Robertson-Walker models were used along with the assumption that the bursts are standard candles and have no number or luminosity evolution. For a given Omega spectral shape, we used a free parameter, essentially the comoving number density of bursts, to generate a best fit between the cosmology and the measured relation. Our results are shown for a subsample of the first 260 GRBs recorded by BATSE. We find acceptable fits between simple cosmological models and the brightness distribution data, as determined by the Kolmogorov-Smirnov one-distribution statistical test. One cannot distinguish a single best cosmological model from the goodness of the fits. The best fit implies that BATSE GRBs are complete out to a redshift of about unity. However, significantly higher and lower redshifts, by as much as a factor of 2, are possible for other marginally acceptable fits.

Comparison of Keratometry Obtained by a Swept Source OCT-Based Biometer with a Standard Optical Biometer and Scheimpflug Imaging.

PubMed

Asena, Leyla; Akman, Ahmet; Güngör, Sirel Gür; Dursun Altınörs, Dilek

2018-04-09

To assess agreement of a swept source-optical coherence tomography (SS-OCT) based Biometer with a standard IOLMaster device and Scheimpflug Imaging (SI) to acquire keratometric measurements in cataract patients. In this prospective comparative study, 101 eyes of 101 cataract surgery candidates, aged 24-81 years, were sequentially examined using three devices. Keratometry values at the flat (K1) and steep (K2) axis, mean corneal power (Km) and magnitude of corneal astigmatism as well as J0 and J45 vectoral components of astigmatism obtained with the SS-OCT based biometer (IOLMaster 700) were compared with those obtained with the IOLMaster 500 and SI. The agreement between measurements was evaluated by the Bland-Altman method, intraclass correlation coefficients (ICCs) and repeated-measures analysis of variance. Mean K1 values from the three devices were similar (p = 0.09). Mean K2 and Km values of IOLMaster 700 were higher than SI and lower than IOLMaster 500 (p = 0.04 for K2 and p = 0.02 for Km). There was a strong correlation between K1, K2, Km and magnitude of astigmatism obtained with all devices (r ≥ 0.80 and p < 0.01). The 95% limits of agreement (LoA) width for each keratometric value were highest for the comparison between IOLMaster 500 and SI and lowest for the comparison between IOLMaster 700 and 500. The mean differences (width of 95% LoA) for J0 and J45 vectoral components were 0.005 (2.19) and 0.12 (2.92) for the measurements obtained by IOLMaster 700 vs IOLMaster 500 and 0.06 (1.79) and 0.02 (1.58) for the measurements obtained by IOLMaster 700 vs SI, respectively. With ICCs close to 1, the agreement between all devices was excellent for keratometric measurements. Mean K2, Km and astigmatism measurements from IOLMaster 700 were lower than IOLMaster 500 and higher than SI. However, the differences were quite small and are not expected to affect the final IOL power.

First uncertainty evaluation of the FoCS-2 primary frequency standard

NASA Astrophysics Data System (ADS)

Jallageas, A.; Devenoges, L.; Petersen, M.; Morel, J.; Bernier, L. G.; Schenker, D.; Thomann, P.; Südmeyer, T.

2018-06-01

We report the uncertainty evaluation of the Swiss continuous primary frequency standard FoCS-2 (Fontaine Continue Suisse). Unlike other primary frequency standards which are working with clouds of cold atoms, this fountain uses a continuous beam of cold caesium atoms bringing a series of metrological advantages and specific techniques for the evaluation of the uncertainty budget. Recent improvements of FoCS-2 have made possible the evaluation of the frequency shifts and of their uncertainties in the order of . When operating in an optimal regime a relative frequency instability of is obtained. The relative standard uncertainty reported in this article, , is strongly dominated by the statistics of the frequency measurements.

A Standardized Relative Resource Cost Model for Medical Care: Application to Cancer Control Programs

PubMed Central

2013-01-01

Medicare data represent 75% of aged and permanently disabled Medicare beneficiaries enrolled in the fee-for-service (FFS) indemnity option, but the data omit 25% of beneficiaries enrolled in Medicare Advantage health maintenance organizations (HMOs). Little research has examined how longitudinal patterns of utilization differ between HMOs and FFS. The Burden of Cancer Study developed and implemented an algorithm to assign standardized relative costs to HMO and Medicare FFS data consistently across time and place. Medicare uses 15 payment systems to reimburse FFS providers for covered services. The standardized relative resource cost algorithm (SRRCA) adapts these various payment systems to utilization data. We describe the rationale for modifications to the Medicare payment systems and discuss the implications of these modifications. We applied the SRRCA to data from four HMO sites and the linked Surveillance, Epidemiology, and End Results–Medicare data. Some modifications to Medicare payment systems were required, because data elements needed to categorize utilization were missing from both data sources. For example, data were not available to create episodes for home health services received, so we assigned costs per visit based on visit type (nurse, therapist, and aide). For inpatient utilization, we modified Medicare’s payment algorithm by changing it from a flat payment per diagnosis-related group to daily rates for diagnosis-related groups to differentiate shorter versus longer stays. The SRRCA can be used in multiple managed care plans and across multiple FFS delivery systems within the United States to create consistent relative cost data for economic analyses. Prior to international use of the SRRCA, data need to be standardized. PMID:23962514

45 CFR 146.130 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Benefits § 146.130 Standards relating to benefits for mothers and newborns. (a) Hospital length of stay—(1... stay in connection with childbirth for a mother or her newborn may not restrict benefits for the stay... hospital length of stay for the mother or newborn child begins at the time of delivery (or in the case of...

29 CFR 2590.711 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Requirements § 2590.711 Standards relating to benefits for mothers and newborns. (a) Hospital length of stay—(1... stay in connection with childbirth for a mother or her newborn may not restrict benefits for the stay... hospital length of stay for the mother or newborn child begins at the time of delivery (or in the case of...

29 CFR 2590.711 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Requirements § 2590.711 Standards relating to benefits for mothers and newborns. (a) Hospital length of stay—(1... stay in connection with childbirth for a mother or her newborn may not restrict benefits for the stay... hospital length of stay for the mother or newborn child begins at the time of delivery (or in the case of...

45 CFR 146.130 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Benefits § 146.130 Standards relating to benefits for mothers and newborns. (a) Hospital length of stay—(1... stay in connection with childbirth for a mother or her newborn may not restrict benefits for the stay... hospital length of stay for the mother or newborn child begins at the time of delivery (or in the case of...

29 CFR 2590.711 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Requirements § 2590.711 Standards relating to benefits for mothers and newborns. (a) Hospital length of stay—(1... stay in connection with childbirth for a mother or her newborn may not restrict benefits for the stay... hospital length of stay for the mother or newborn child begins at the time of delivery (or in the case of...

45 CFR 146.130 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Benefits § 146.130 Standards relating to benefits for mothers and newborns. (a) Hospital length of stay—(1... stay in connection with childbirth for a mother or her newborn may not restrict benefits for the stay... hospital length of stay for the mother or newborn child begins at the time of delivery (or in the case of...

Electron Probe MicroAnalysis (EPMA) Standards. Issues Related to Measurement and Accuracy Evaluation in EPMA

NASA Technical Reports Server (NTRS)

Carpenter, Paul

2003-01-01

Electron-probe microanalysis standards and issues related to measurement and accuracy of microanalysis will be discussed. Critical evaluation of standards based on homogeneity and comparison with wet-chemical analysis will be made. Measurement problems such as spectrometer dead-time will be discussed. Analytical accuracy issues will be evaluated for systems by alpha-factor analysis and comparison with experimental k-ratio databases.

a Comparison of Evaluations and Assessments Obtained Using Alternative Standards for Predicting the Hazards of Whole-Body Vibration and Repeated Shocks

NASA Astrophysics Data System (ADS)

Lewis, C. H.; Griffin, M. J.

1998-08-01

There are three current standards that might be used to assess the vibration and shock transmitted by a vehicle seat with respect to possible effects on human health: ISO 2631/1 (1985), BS 6841 (1987) and ISO 2631-1 (1997). Evaluations have been performed on the seat accelerations measured in nine different transport environments (bus, car, mobile crane, fork-lift truck, tank, ambulance, power boat, inflatable boat, mountain bike) in conditions that might be considered severe. For each environment, limiting daily exposure durations were estimated by comparing the frequency weighted root mean square (i.e., r.m.s.) accelerations and the vibration dose values (i.e.,VDV), calculated according to each standard with the relevant exposure limits, action level and health guidance caution zones. Very different estimates of the limiting daily exposure duration can be obtained using the methods described in the three standards. Differences were observed due to variations in the shapes of the frequency weightings, the phase responses of the frequency weighting filters, the method of combining multi-axis vibration, the averaging method, and the assessment method. With the evaluated motions, differences in the shapes of the weighting filters results in up to about 31% difference in r.m.s. acceleration between the “old” and the “new” ISO standard and up to about 14% difference between BS 6841 and the “new” ISO 2631. There were correspondingly greater differences in the estimates of safe daily exposure durations. With three of the more severe motions there was a difference of more than 250% between estimated safe daily exposure durations based on r.m.s. acceleration and those based on fourth power vibration dose values. The vibration dose values provided the more cautious assessments of the limiting daily exposure duration.

Inventory of Safety-related Codes and Standards for Energy Storage Systems with some Experiences related to Approval and Acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.

The purpose of this document is to identify laws, rules, model codes, codes, standards, regulations, specifications (CSR) related to safety that could apply to stationary energy storage systems (ESS) and experiences to date securing approval of ESS in relation to CSR. This information is intended to assist in securing approval of ESS under current CSR and to identification of new CRS or revisions to existing CRS and necessary supporting research and documentation that can foster the deployment of safe ESS.

Obtaining Related Services through Local Interagency Collaboration.

ERIC Educational Resources Information Center

Olsen, Kenneth R.

Designed as a resource for local school administrators, the report describes the experiences of 15 local special education agencies in providing related services at reasonable cost through interagency cooperation. An introductory chapter discusses the role of interagency committees (both policy and direct service types), and provides information…

A comparison of oxygen saturation measurements obtained from a 'blue sensor' with a standard sensor.

PubMed

Mawson, Isabel E; Dawson, Jennifer A; Donath, Susan M; Davis, Peter G

2011-10-01

The study aims to investigate pulse oximetry measurements from a 'blue' pulse oximeter sensor against measurements from a 'standard' pulse oximeter sensor in newly born infants. Immediately after birth, both sensors were attached to the infant, one to each foot. SpO₂ measurements were recorded simultaneously from each sensor for 10 min. Agreement between pairs of SpO₂ measurements were calculated using Bland-Altman analysis. Thirty-one infants were studied. There was good correlation between simultaneous SpO₂ measurements from both sensors (r² = 0.75). However, the mean difference between 'blue' and 'standard' sensors was -1.6%, with wide 95% limits of agreement +18.4 to -21.6%. The range of mean difference between sensors from each infant ranged from -20 to +20. The mean difference between the blue and standard sensor SpO₂ measurements is not clinically important. © 2011 The Authors. Journal of Paediatrics and Child Health © 2011 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

Some issues relating to the use of perfluorooctanesulfonate (PFOS) samples as reference standards.

PubMed

Arsenault, Gilles; Chittim, Brock; McAlees, Alan; McCrindle, Robert; Riddell, Nicole; Yeo, Brian

2008-01-01

Samples of potassium perfluorooctanesulfonate (PFOSK) from three suppliers were analyzed by LC-ESI-MS/MS for purity and by LC-ESI-MS for the percentage of linear isomer present. Our data indicated that the purity ranged from 80% to 98% and the percentages of linear isomer from 67% to 79%. The proportion of branched isomers present in the samples was also estimated using (19)F NMR. These results agreed quite closely with those found by LC-ESI-MS indicating that there is essentially no difference in overall SIM response factor for the branched isomers vs. that of the linear isomer. Several further observations relevant to the use of standards when analyzing for PFOS were encountered during this study. It appears unlikely that matrix effects attributable to the cation (sodium or potassium) present in PFOSNa or PFOSK internal standards is an issue. In seeking potential matrix effects, it was found that the chromatography was improved substantially when the standard was injected as a solution in 80:20 methanol/water rather than 100% methanol. Notably, in concert with the improvement in chromatography, an increase of about 10% in response was observed. In some closely related studies, when (18)O(2) mass-labeled perfluorohexanesulfonate was used as an internal standard, the actual and theoretical concentration ratios matched closely those for related native sulfonates as long as they did not co-elute. However, when they did co-elute, the peak intensities of the native species were enhanced by about 5%, while those of the labeled compound were suppressed by a similar amount. If this effect were not taken into account, the concentration of the native would be inflated by 10%.

Procedures for Obtaining and Analyzing Writing Samples of School-Age Children and Adolescents.

PubMed

Price, Johanna R; Jackson, Sandra C

2015-10-01

Many students' writing skills are below grade-level expectations, and students with oral language difficulties are at particular risk for writing difficulties. Speech-language pathologists' (SLPs') expertise in language applies to both the oral and written modalities, yet evidence suggests that SLPs' confidence regarding writing assessment is low. Writing samples are a clinically useful, criterion-referenced assessment technique that is relevant to helping students satisfy writing-related requirements of the Common Core State Standards (National Governors Association Center for Best Practices and Council of Chief State School Officers, 2010a). This article provides recommendations for obtaining and analyzing students' writing samples. In this tutorial, the authors provide a comprehensive literature review of methods regarding (a) collection of writing samples from narrative, expository (informational/explanatory), and persuasive (argument) genres; (b) variables of writing performance that are useful to assess; and (c) manual and computer-aided techniques for analyzing writing samples. The authors relate their findings to expectations for writing skills expressed in the Common Core State Standards (National Governors Association Center for Best Practices & Council of Chief State School Officers, 2010a). SLPs can readily implement many techniques for obtaining and analyzing writing samples. The information in this article provides SLPs with recommendations for the use of writing samples and may help increase SLPs' confidence regarding written language assessment.

26 CFR 54.9811-1 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 17 2011-04-01 2011-04-01 false Standards relating to benefits for mothers and... benefits for mothers and newborns. (a) Hospital length of stay—(1) General rule. Except as provided in... in connection with childbirth for a mother or her newborn may not restrict benefits for the stay to...

26 CFR 54.9811-1 - Standards relating to benefits for mothers and newborns.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 17 2010-04-01 2010-04-01 false Standards relating to benefits for mothers and... benefits for mothers and newborns. (a) Hospital length of stay—(1) General rule. Except as provided in... in connection with childbirth for a mother or her newborn may not restrict benefits for the stay to...

The role of explicit and implicit standards in visual speed discrimination.

PubMed

Norman, J Farley; Pattison, Kristina F; Norman, Hideko F; Craft, Amy E; Wiesemann, Elizabeth Y; Taylor, M Jett

2008-01-01

Five experiments were designed to investigate visual speed discrimination. Variations of the method of constant stimuli were used to obtain speed discrimination thresholds in experiments 1, 2, 4, and 5, while the method of single stimuli was used in experiment 3. The observers' thresholds were significantly influenced by the choice of psychophysical method and by changes in the standard speed. The observers' judgments were unaffected, however, by changes in the magnitude of random variations in stimulus duration, reinforcing the conclusions of Lappin et al (1975 Journal of Experimental Psychology: Human Perception and Performance 1 383 394). When an implicit standard was used, the observers produced relatively low discrimination thresholds (7.0% of the standard speed), verifying the results of McKee (1981 Vision Research 21 491-500). When an explicit standard was used in a 2AFC variant of the method of constant stimuli, however, the observers' discrimination thresholds increased by 74% (to 12.2%), resembling the high thresholds obtained by Mandriota et al (1962 Science 138 437-438). A subsequent signal-detection analysis revealed that the observers' actual sensitivities to differences in speed were in fact equivalent for both psychophysical methods. The formation of an implicit standard in the method of single stimuli allows human observers to make judgments of speed that are as precise as those obtained when explicit standards are available.

On the linear relation between the mean and the standard deviation of a response time distribution.

PubMed

Wagenmakers, Eric-Jan; Brown, Scott

2007-07-01

Although it is generally accepted that the spread of a response time (RT) distribution increases with the mean, the precise nature of this relation remains relatively unexplored. The authors show that in several descriptive RT distributions, the standard deviation increases linearly with the mean. Results from a wide range of tasks from different experimental paradigms support a linear relation between RT mean and RT standard deviation. Both R. Ratcliff's (1978) diffusion model and G. D. Logan's (1988) instance theory of automatization provide explanations for this linear relation. The authors identify and discuss 3 specific boundary conditions for the linear law to hold. The law constrains RT models and supports the use of the coefficient of variation to (a) compare variability while controlling for differences in baseline speed of processing and (b) assess whether changes in performance with practice are due to quantitative speedup or qualitative reorganization. Copyright 2007 APA.

Examining database persistence of ISO/EN 13606 standardized electronic health record extracts: relational vs. NoSQL approaches.

PubMed

Sánchez-de-Madariaga, Ricardo; Muñoz, Adolfo; Lozano-Rubí, Raimundo; Serrano-Balazote, Pablo; Castro, Antonio L; Moreno, Oscar; Pascual, Mario

2017-08-18

The objective of this research is to compare the relational and non-relational (NoSQL) database systems approaches in order to store, recover, query and persist standardized medical information in the form of ISO/EN 13606 normalized Electronic Health Record XML extracts, both in isolation and concurrently. NoSQL database systems have recently attracted much attention, but few studies in the literature address their direct comparison with relational databases when applied to build the persistence layer of a standardized medical information system. One relational and two NoSQL databases (one document-based and one native XML database) of three different sizes have been created in order to evaluate and compare the response times (algorithmic complexity) of six different complexity growing queries, which have been performed on them. Similar appropriate results available in the literature have also been considered. Relational and non-relational NoSQL database systems show almost linear algorithmic complexity query execution. However, they show very different linear slopes, the former being much steeper than the two latter. Document-based NoSQL databases perform better in concurrency than in isolation, and also better than relational databases in concurrency. Non-relational NoSQL databases seem to be more appropriate than standard relational SQL databases when database size is extremely high (secondary use, research applications). Document-based NoSQL databases perform in general better than native XML NoSQL databases. EHR extracts visualization and edition are also document-based tasks more appropriate to NoSQL database systems. However, the appropriate database solution much depends on each particular situation and specific problem.

ESDIS Standards Office (ESO): Requirements, Standards and Practices

NASA Technical Reports Server (NTRS)

Mitchell, Andrew E.; Mcinerney, Mark Allen; Enloe, Yonsok K.; Conover, Helen T.; Doyle, Allan

2016-01-01

The ESDIS Standards Office assists the ESDIS Project in formulating standards policy for NASA Earth Science Data Systems (ESDS), coordinates standards activities within ESDIS, and provides technical expertise and assistance with standards related tasks within the NASA Earth Science Data System Working Groups (ESDSWG). This poster summarizes information found on the earthdata.nasa.gov site that describes the ESO.

Information Interface Related Standards, Guidelines, and Recommended Practices.

DTIC Science & Technology

1985-07-01

Application Workshop, IEEE, October 1984 (11) Software Portability and Standards, by Ingemar Dahlstrand, Ellis Horwood Ltd., 1984 (12) World of EDP...March 29, 1985, p. 42-48 * 9. "IBM’s Topview Plays to Poor Reviews of Early Users," Computer World , March 4, 1985, p. 5 10. "Lack of Software Standards...Information Symbols ISOiTR 7239-1984 - Development and Principles for Application of Public Information Symbols ISO/TR 8545 -1984 - Technical Drawings

N400 Event-Related Potential and Standardized Measures of Reading in Late Elementary School Children: Correlated or Independent?

ERIC Educational Resources Information Center

Coch, Donna; Benoit, Clarisse

2015-01-01

We investigated whether and how standardized behavioral measures of reading and electrophysiological measures of reading were related in 72 typically developing, late elementary school children. Behavioral measures included standardized tests of spelling, phonological processing, vocabulary, comprehension, naming speed, and memory.…

Super-resolution for everybody: An image processing workflow to obtain high-resolution images with a standard confocal microscope.

PubMed

Lam, France; Cladière, Damien; Guillaume, Cyndélia; Wassmann, Katja; Bolte, Susanne

2017-02-15

In the presented work we aimed at improving confocal imaging to obtain highest possible resolution in thick biological samples, such as the mouse oocyte. We therefore developed an image processing workflow that allows improving the lateral and axial resolution of a standard confocal microscope. Our workflow comprises refractive index matching, the optimization of microscope hardware parameters and image restoration by deconvolution. We compare two different deconvolution algorithms, evaluate the necessity of denoising and establish the optimal image restoration procedure. We validate our workflow by imaging sub resolution fluorescent beads and measuring the maximum lateral and axial resolution of the confocal system. Subsequently, we apply the parameters to the imaging and data restoration of fluorescently labelled meiotic spindles of mouse oocytes. We measure a resolution increase of approximately 2-fold in the lateral and 3-fold in the axial direction throughout a depth of 60μm. This demonstrates that with our optimized workflow we reach a resolution that is comparable to 3D-SIM-imaging, but with better depth penetration for confocal images of beads and the biological sample. Copyright © 2016 Elsevier Inc. All rights reserved.

Microprobe Analysis of Pu-Ga Standards

DOE PAGES

Wall, Angélique D.; Romero, Joseph P.; Schwartz, Daniel

2017-08-04

In order to obtain quantitative analysis using an Electron Scanning Microprobe it is essential to have a standard of known composition. Most elemental and multi-elemental standards can be easily obtained from places like Elemental Scientific or other standards organizations that are NIST (National Institute of Standards and Technology) traceable. It is, however, more challenging to find standards for plutonium. Past work performed in our group has typically involved using the plutonium sample to be analysed as its own standard as long as all other known components of the sample have standards to be compared to [1,2,3]. Finally, this method worksmore » well enough, but this experiment was performed in order to develop a more reliable standard for plutonium using five samples of known chemistry of a plutonium gallium mix that could then be used as the main plutonium and gallium standards for future experiments.« less

Microprobe Analysis of Pu-Ga Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wall, Angélique D.; Romero, Joseph P.; Schwartz, Daniel

In order to obtain quantitative analysis using an Electron Scanning Microprobe it is essential to have a standard of known composition. Most elemental and multi-elemental standards can be easily obtained from places like Elemental Scientific or other standards organizations that are NIST (National Institute of Standards and Technology) traceable. It is, however, more challenging to find standards for plutonium. Past work performed in our group has typically involved using the plutonium sample to be analysed as its own standard as long as all other known components of the sample have standards to be compared to [1,2,3]. Finally, this method worksmore » well enough, but this experiment was performed in order to develop a more reliable standard for plutonium using five samples of known chemistry of a plutonium gallium mix that could then be used as the main plutonium and gallium standards for future experiments.« less

Work-related falls among union carpenters in Washington State before and after the Vertical Fall Arrest Standard.

PubMed

Lipscomb, Hester J; Li, Leiming; Dement, John

2003-08-01

Washington State enacted a change in their fall standard for the construction industry in 1991, preceding the Safety Standard for Fall Protection in the Construction Industry promulgated by Federal OSHA in 1994. We evaluated changes in the rate of falls from elevations and measures of severity among a large cohort of union carpenters after the fall standard change in Washington State, taking into account the temporal trends in their overall injury rates. There was a significant decrease in the rate of falls from height after the standard went into effect, even after adjusting for the overall decrease in work-related injuries among this cohort. Much of the decrease was immediate, likely representing the publicity surrounding fatal falls and subsequent promulgation of the standard. The greatest decrease was seen between 3 and 3(1/2) years after the standard went into effect. There was a significant reduction in mean paid lost days per event after the standard change and there was a significant reduction in mean cost per fall when adjusting for age and the temporal trend for costs among non-fall injuries. Through the use of observational methods we have demonstrated significant effects of the Washington State Vertical Fall Arrest Standard among carpenters in the absence of a control or comparison group. Without controlling for the temporal trend in overall injury rates, the rate of decline in falls appeared significantly greater, but the more pronounced, but delayed, decline was not seen. The analyses demonstrate potential error in failing to account for temporal patterns or assuming that a decline after an intervention is related to the intervention. Copyright 2003 Wiley-Liss, Inc.

On the Linear Relation between the Mean and the Standard Deviation of a Response Time Distribution

ERIC Educational Resources Information Center

Wagenmakers, Eric-Jan; Brown, Scott

2007-01-01

Although it is generally accepted that the spread of a response time (RT) distribution increases with the mean, the precise nature of this relation remains relatively unexplored. The authors show that in several descriptive RT distributions, the standard deviation increases linearly with the mean. Results from a wide range of tasks from different…

Using Internet Search Engines to Obtain Medical Information: A Comparative Study

PubMed Central

Wang, Liupu; Wang, Juexin; Wang, Michael; Li, Yong; Liang, Yanchun

2012-01-01

Background The Internet has become one of the most important means to obtain health and medical information. It is often the first step in checking for basic information about a disease and its treatment. The search results are often useful to general users. Various search engines such as Google, Yahoo!, Bing, and Ask.com can play an important role in obtaining medical information for both medical professionals and lay people. However, the usability and effectiveness of various search engines for medical information have not been comprehensively compared and evaluated. Objective To compare major Internet search engines in their usability of obtaining medical and health information. Methods We applied usability testing as a software engineering technique and a standard industry practice to compare the four major search engines (Google, Yahoo!, Bing, and Ask.com) in obtaining health and medical information. For this purpose, we searched the keyword breast cancer in Google, Yahoo!, Bing, and Ask.com and saved the results of the top 200 links from each search engine. We combined nonredundant links from the four search engines and gave them to volunteer users in an alphabetical order. The volunteer users evaluated the websites and scored each website from 0 to 10 (lowest to highest) based on the usefulness of the content relevant to breast cancer. A medical expert identified six well-known websites related to breast cancer in advance as standards. We also used five keywords associated with breast cancer defined in the latest release of Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT) and analyzed their occurrence in the websites. Results Each search engine provided rich information related to breast cancer in the search results. All six standard websites were among the top 30 in search results of all four search engines. Google had the best search validity (in terms of whether a website could be opened), followed by Bing, Ask.com, and Yahoo!. The search

Using Internet search engines to obtain medical information: a comparative study.

PubMed

Wang, Liupu; Wang, Juexin; Wang, Michael; Li, Yong; Liang, Yanchun; Xu, Dong

2012-05-16

The Internet has become one of the most important means to obtain health and medical information. It is often the first step in checking for basic information about a disease and its treatment. The search results are often useful to general users. Various search engines such as Google, Yahoo!, Bing, and Ask.com can play an important role in obtaining medical information for both medical professionals and lay people. However, the usability and effectiveness of various search engines for medical information have not been comprehensively compared and evaluated. To compare major Internet search engines in their usability of obtaining medical and health information. We applied usability testing as a software engineering technique and a standard industry practice to compare the four major search engines (Google, Yahoo!, Bing, and Ask.com) in obtaining health and medical information. For this purpose, we searched the keyword breast cancer in Google, Yahoo!, Bing, and Ask.com and saved the results of the top 200 links from each search engine. We combined nonredundant links from the four search engines and gave them to volunteer users in an alphabetical order. The volunteer users evaluated the websites and scored each website from 0 to 10 (lowest to highest) based on the usefulness of the content relevant to breast cancer. A medical expert identified six well-known websites related to breast cancer in advance as standards. We also used five keywords associated with breast cancer defined in the latest release of Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT) and analyzed their occurrence in the websites. Each search engine provided rich information related to breast cancer in the search results. All six standard websites were among the top 30 in search results of all four search engines. Google had the best search validity (in terms of whether a website could be opened), followed by Bing, Ask.com, and Yahoo!. The search results highly overlapped between the

[Assessing work-related stress: an Italian adaptation of the HSE Management Standards Work-Related Stress Indicator Tool].

PubMed

Marcatto, Francesco; D'Errico, Giuseppe; Di Blas, Lisa; Ferrante, Donatella

2011-01-01

The aim of this paper is to present a preliminary validation of an Italian adaptation of the HSE Management Standards Work-Related Stress Indicator Tool (IT), an instrument for assessing work-related stress at the organizational level, originally developed in Britain by the Health and Safety Executive. A scale that assesses the physical work environment has been added to the original version of the IT. 190 employees of the University of Trieste have been enrolled in the study. A confirmatory analysis showed a satisfactory fit of the eight-factors structure of the instrument. Further psychometric analysis showed adequate internal consistency of the IT scales and good criterion validity, as evidenced by the correlations with self-perception of stress, work satisfaction and motivation. In conclusion, the Indicator Tool proved to be a valid and reliable instrument for the assessment of work-related stress at the organizational level, and it is also compatible with the instructions provided by the Ministry of Labour and Social Policy (Circular letter 18/11/2010).

Incorporating Experience Curves in Appliance Standards Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery

2011-10-31

The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners,more » clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.« less

Dietary standards for school catering in France: serving moderate quantities to improve dietary quality without increasing the food-related cost of meals.

PubMed

Vieux, Florent; Dubois, Christophe; Allegre, Laëtitia; Mandon, Lionel; Ciantar, Laurent; Darmon, Nicole

2013-01-01

To assess the impact on food-related cost of meals to fulfill the new compulsory dietary standards for primary schools in France. A descriptive study assessed the relationship between the level of compliance with the standards of observed school meals and their food-related cost. An analytical study assessed the cost of series of meals published in professional journals, and complying or not with new dietary standards. The costs were based on prices actually paid for food used to prepare school meals. Food-related cost of meals. Parametric and nonparametric tests from a total of 42 and 120 series of 20 meals in the analytical and descriptive studies, respectively. The descriptive study indicated that meeting the standards was not related to cost. The analytical study showed that fulfilling the frequency guidelines increased the cost, whereas fulfilling the portion sizes criteria decreased it. Series of meals fully respecting the standards (ie, frequency and portion sizes) cost significantly less (-0.10 €/meal) than series not fulfilling them, because the standards recommend smaller portion sizes. Introducing portion sizes rules in dietary standards for school catering may help increase dietary quality without increasing the food cost of meals. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Evidence of Shifting Standards in Judgments of Male and Female Parents' Job-Related Ability

ERIC Educational Resources Information Center

Fuegen, Kathleen; Endicott, Nicole F.

2010-01-01

We tested the hypothesis, derived from the shifting standards model of stereotyping, that parenthood would polarize judgments of men's and women's job-related ability. One hundred thirty-five attorneys evaluated the resume of a recent law school graduate. The resume depicted the graduate as male or female and as either single or married with two…

Accuracy investigation of phthalate metabolite standards.

PubMed

Langlois, Éric; Leblanc, Alain; Simard, Yves; Thellen, Claude

2012-05-01

Phthalates are ubiquitous compounds whose metabolites are usually determined in urine for biomonitoring studies. Following suspect and unexplained results from our laboratory in an external quality-assessment scheme, we investigated the accuracy of all phthalate metabolite standards in our possession by comparing them with those of several suppliers. Our findings suggest that commercial phthalate metabolite certified solutions are not always accurate and that lot-to-lot discrepancies significantly affect the accuracy of the results obtained with several of these standards. These observations indicate that the reliability of the results obtained from different lots of standards is not equal, which reduces the possibility of intra-laboratory and inter-laboratory comparisons of results. However, agreements of accuracy have been observed for a majority of neat standards obtained from different suppliers, which indicates that a solution to this issue is available. Data accuracy of phthalate metabolites should be of concern for laboratories performing phthalate metabolite analysis because of the standards used. The results of our investigation are presented from the perspective that laboratories performing phthalate metabolite analysis can obtain accurate and comparable results in the future. Our findings will contribute to improving the quality of future phthalate metabolite analyses and will affect the interpretation of past results.

7 CFR 54.6 - How to obtain service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) MEATS, PREPARED MEATS, AND MEAT PRODUCTS (GRADING, CERTIFICATION, AND STANDARDS) Regulations Service § 54.6 How to obtain service...'s new commitment. If more than one applicant is involved in the reapplication for a canceled meat...

7 CFR 54.6 - How to obtain service.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) MEATS, PREPARED MEATS, AND MEAT PRODUCTS (GRADING, CERTIFICATION, AND STANDARDS) Regulations Service § 54.6 How to obtain service...'s new commitment. If more than one applicant is involved in the reapplication for a canceled meat...

An exploration of terminology related to sexuality and gender: arguments for standardizing the language.

PubMed

Eliason, Michele J

2014-01-01

There is currently no consensus on the best ways to define and operationalize research concepts related to sexuality and gender. This article explores some of the ways that sex/gender and sexuality terms have been used in health-related research and in keyword searches in the health sciences. Reasons for the diversity of terms and measurement approaches are explored and arguments for and against standardizing the language are presented. The article ends with recommendations for beginning a productive dialogue among health researchers to create some consistency in the terminology used to assess sexuality and gender.

Can Performance-Related Learning Outcomes Have Standards?

ERIC Educational Resources Information Center

Brockmann, Michaela; Clarke, Linda; Winch, Christopher

2008-01-01

Purpose: This paper aims to explain the distinction between educational standards and learning outcomes and to indicate the problems that potentially arise when a learning outcomes approach is applied to a qualification meta-framework like the European Qualification Framework, or indeed to national qualification frameworks.…

Correcting horsepower measurements to a standard temperature

NASA Technical Reports Server (NTRS)

Sparrow, Stanwood W

1925-01-01

This report discusses the relation between the temperature of the air at the entrance to the carburetor and the power developed by the engine. Its scope is limited to a consideration of the range of temperatures likely to result from changes of season, locality, or altitude, since its primary aim is the finding of a satisfactory basis for correcting power measurements to a standard temperature. The tests upon which this report is based were made upon aviation engines in the Altitude Laboratory of the Bureau of Standards. From the results of over 1,600 tests it is concluded that if calculations be based on the assumption that the indicated horsepower of an engine varies inversely as the square root of the absolute temperature of the carburetor air the values obtained will check closely experimental measurements. The extent to which this relationship would be expected from theoretical considerations is discussed and some suggestions are given relative to the use of this relationship in correcting horsepower measurements. (author)

Standardized comparison of the relative impacts of HIV-1 reverse transcriptase (RT) mutations on nucleoside RT inhibitor susceptibility.

PubMed

Melikian, George L; Rhee, Soo-Yon; Taylor, Jonathan; Fessel, W Jeffrey; Kaufman, David; Towner, William; Troia-Cancio, Paolo V; Zolopa, Andrew; Robbins, Gregory K; Kagan, Ron; Israelski, Dennis; Shafer, Robert W

2012-05-01

Determining the phenotypic impacts of reverse transcriptase (RT) mutations on individual nucleoside RT inhibitors (NRTIs) has remained a statistical challenge because clinical NRTI-resistant HIV-1 isolates usually contain multiple mutations, often in complex patterns, complicating the task of determining the relative contribution of each mutation to HIV drug resistance. Furthermore, the NRTIs have highly variable dynamic susceptibility ranges, making it difficult to determine the relative effect of an RT mutation on susceptibility to different NRTIs. In this study, we analyzed 1,273 genotyped HIV-1 isolates for which phenotypic results were obtained using the PhenoSense assay (Monogram, South San Francisco, CA). We used a parsimonious feature selection algorithm, LASSO, to assess the possible contributions of 177 mutations that occurred in 10 or more isolates in our data set. We then used least-squares regression to quantify the impact of each LASSO-selected mutation on each NRTI. Our study provides a comprehensive view of the most common NRTI resistance mutations. Because our results were standardized, the study provides the first analysis that quantifies the relative phenotypic effects of NRTI resistance mutations on each of the NRTIs. In addition, the study contains new findings on the relative impacts of thymidine analog mutations (TAMs) on susceptibility to abacavir and tenofovir; the impacts of several known but incompletely characterized mutations, including E40F, V75T, Y115F, and K219R; and a tentative role in reduced NRTI susceptibility for K64H, a novel NRTI resistance mutation.

40 CFR 1045.515 - What are the test procedures related to not-to-exceed standards?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false What are the test procedures related to not-to-exceed standards? 1045.515 Section 1045.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.515 - What are the test procedures related to not-to-exceed standards?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false What are the test procedures related to not-to-exceed standards? 1045.515 Section 1045.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.515 - What are the test procedures related to not-to-exceed standards?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false What are the test procedures related to not-to-exceed standards? 1045.515 Section 1045.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.515 - What are the test procedures related to not-to-exceed standards?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false What are the test procedures related to not-to-exceed standards? 1045.515 Section 1045.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

40 CFR 1045.515 - What are the test procedures related to not-to-exceed standards?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What are the test procedures related to not-to-exceed standards? 1045.515 Section 1045.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION...

How to obtain traceability on optical radiation measurements?

NASA Astrophysics Data System (ADS)

Matamoros García, Carlos H.

2006-02-01

Traceability to national standards provides confidence in measurements results, granting a guaranty when carrying out governmental rules and when demonstrating conformity with quality requirements such as ISO 9000 or ISO/IEC 17025 (and the Mexican equivalent standards). The appropriate traceability contributes with confidence of the quality of products or services. This paper presents different ways to obtain traceability in Mexico for the optical radiation measurements, mentioning some applications, and highlighting the necessity of having traceability to the appropriate units of the SI. Additionally it present the national standards maintained by Centro Nacional de Metrologia (CENAM), the national metrology institute in Mexico, that give the technical support to Mexican measurements in this field and the international recognition that the personal of the Optics and Radiometry Division had gained in 10 years of development.

The International Standard for Oxytetracycline

PubMed Central

Humphrey, J. H.; Lightbown, J. W.; Mussett, M. V.; Perry, W. L. M.

1955-01-01

The first attempt to set up an international standard for oxytetracycline, using oxytetracycline hydrochloride, failed because of difficulties in obtaining a preparation whose moisture content was uniform after distribution into ampoules. A preparation of dihydrate of oxytetracycline base was obtained instead, and was compared in an international collaborative assay with a sample of oxytetracycline hydrochloride, which was the current working standard of Chas. Pfizer & Co., Inc., USA. The results of the collaborative assay showed that the potency of the dihydrate was uniform, and that it was a suitable preparation for use as the International Standard. Evidence was obtained, however, that the reference preparation at the time of examination was less potent than had been originally supposed, and that it was hydrated. The potency of the proposed international standard was recalculated after allowance for water in the reference preparation, and the resulting biological potency agreed well with that to be expected on the basis of the physicochemical properties of the preparation. It was agreed, therefore, that the recalculated values should be used, and the preparation of oxytetracycline base dihydrate used in the collaborative assay is established as the International Standard for Oxytetracycline with a potency of 900 International Units per mg. PMID:13284563

Assessing health-related quality of life in patients with breast cancer: a systematic and standardized comparison of available instruments using the EMPRO tool.

PubMed

Maratia, Stefano; Cedillo, Sergio; Rejas, Javier

2016-10-01

The objective was to obtain a standardized evaluation of available specific and generic breast cancer health-related quality-of-life instruments. We carried out systematic literature reviews in the PubMed and EMBASE databases to identify manuscripts which contained information regarding either the development process or metric properties of health-related quality-of-life instruments used among breast cancer patients. Each instrument was evaluated independently by two researchers, and occasionally a third one, using the Evaluating Measures of Patient-Reported Outcomes (EMPRO) tool. An overall score and seven attribute-specific EMPRO scores were calculated (range 0-100, worst to best): concept and measurement model, reliability, validity, responsiveness, interpretability, burden, and alternative forms. FACT-B was the instrument with the best global performance, obtaining an overall EMPRO score of 79.27. It was also the most accurate instrument on the Concept and Measurement Model, Reliability, and Interpretability attributes. Four more instruments scored over 50 points on the overall score, which summarizes the five attribute-specific scores: EORTC BR-23, IBCSG, WHO-QOL BREF, and SF-36. An overall score of at least 50 points implies that the use of these instruments could be recommended for assessing health-related quality of life in breast cancer patients. The FACT-B scored the highest on overall on our EMPRO evaluation of instruments measuring health-related quality of life among breast cancer patients. However, depending on the purpose of the study, several instruments (EORTC BR-23, IBCSG, SF-36, and WHO-QOL BREF) have shown good performance in some of the specific individual dimensions included in the EMPRO.

Non-Standard Orthography and Non-Standard Speech.

ERIC Educational Resources Information Center

Jaffe, Alexandra

2000-01-01

Provides a framework of key issues surrounding the non-standard orthographic representation of non-standard language varieties. The following topics are addressed: the selective nature of orthographic choice; relational an contrastive meaning of orthographic conventions; interplay of sameness and difference in use of orthography to make claims on…

48 CFR 11.102 - Standardization program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Standardization Manual, FSPM-0001; for DoD components, DoD 4120.24-M, Defense Standardization Program Policies and... (see address in 11.201(d)(1)). DoD 4120.24-M may be obtained from DoD (see 11.201(d)(2) or 11.201(d)(3)). FIPS PUBS may be obtained from the Government Printing Office (GPO), or the Department of Commerce's...

Consideration on the health risk reduction related to attainment of the new particulate matter standards in Poland: A top-down policy risk assessment approach.

PubMed

Kobza, Joanna; Pastuszka, Józef S; Gulis, Gabriel

2016-01-01

Policies can influence health of a population in various ways. Numerous epidemiological studies supported by toxicological investigations demonstrate a positive association between ambient concentrations of airborne particulate matter and increased adverse cardio-respiratory events, including morbidity and mortality. The aim of this paper was to present the concept of the top-down health policy risk assessment approach model developed to estimate the expected health risk reduction associated with policy aiming at attaining the new particulate matter ≤ 10 μm in diameter (PM10) standards in Poland. The top-down approach guides the analysis of causal chains from the policy to health outcomes. In this case study we tried to estimate the predicted health effects of the policy change over the past 20 years. Since Polish annual standard for PM10 changed from 50 μg/m³ in 1990 to 40 μg/m³ in 2010, we calculated the relative risk associated with decreasing PM10 in diameter to 10 μg/m3 in the annual level of PM10 for 6 adverse health effects. The relative risk slightly decreased for almost all adverse health effects, which means that the relative decrease in the incidence of health effects from the baseline incidence should range from about 0.5-0.6% for heart disease admissions to > 1% for respiratory admissions. The obtained results indicate that implementation of the new ambient air standards could influence improvement of the health status of Polish population. A top-down policy health risk assessment model can be one of the main tools in this process, providing harmonized guidance how to seek evidence-based information, which could serve policy-makers. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Selected School Laws and Standards. A Summary Containing Specific School Laws Relating to Area Schools, Standards for Area Community Colleges and Area Vocational Schools.

ERIC Educational Resources Information Center

Iowa State Dept. of Public Instruction, Des Moines. Area Schools and Career Education Branch.

This document provides a selected summary of school laws relating to area schools and standards for area community colleges and vocational schools in Iowa. Area schools are authorized to offer the first two years of college work, pre-professional education, vocational and technical training, inservice training and retraining of workers, programs…

National Practice Patterns of Obtaining Informed Consent for Stroke Thrombolysis.

PubMed

Mendelson, Scott J; Courtney, D Mark; Gordon, Elisa J; Thomas, Leena F; Holl, Jane L; Prabhakaran, Shyam

2018-03-01

No standard approach to obtaining informed consent for stroke thrombolysis with tPA (tissue-type plasminogen activator) currently exists. We aimed to assess current nationwide practice patterns of obtaining informed consent for tPA. An online survey was developed and distributed by e-mail to clinicians involved in acute stroke care. Multivariable logistic regression analyses were performed to determine independent factors contributing to always obtaining informed consent for tPA. Among 268 respondents, 36.7% reported always obtaining informed consent and 51.8% reported the informed consent process caused treatment delays. Being an emergency medicine physician (odds ratio, 5.8; 95% confidence interval, 2.9-11.5) and practicing at a nonacademic medical center (odds ratio, 2.1; 95% confidence interval, 1.0-4.3) were independently associated with always requiring informed consent. The most commonly cited cause of delay was waiting for a patient's family to reach consensus about treatment. Most clinicians always or often require informed consent for stroke thrombolysis. Future research should focus on standardizing content and delivery of tPA information to reduce delays. © 2018 American Heart Association, Inc.

A Note on Standard Deviation and Standard Error

ERIC Educational Resources Information Center

Hassani, Hossein; Ghodsi, Mansoureh; Howell, Gareth

2010-01-01

Many students confuse the standard deviation and standard error of the mean and are unsure which, if either, to use in presenting data. In this article, we endeavour to address these questions and cover some related ambiguities about these quantities.

Microwave monolithic integrated circuit-related metrology at the National Institute of Standards and Technology

NASA Astrophysics Data System (ADS)

Reeve, Gerome; Marks, Roger; Blackburn, David

1990-12-01

How the National Institute of Standards and Technology (NIST) interacts with the GaAs community and the Defense Advanced Research Projects Agency microwave monolithic integrated circuit (MMIC) initiative is described. The organization of a joint industry and government laboratory consortium for MMIC-related metrology research is described along with some of the initial technical developments at NIST done in support of the consortium.

Quantitative angle-insensitive flow measurement using relative standard deviation OCT

NASA Astrophysics Data System (ADS)

Zhu, Jiang; Zhang, Buyun; Qi, Li; Wang, Ling; Yang, Qiang; Zhu, Zhuqing; Huo, Tiancheng; Chen, Zhongping

2017-10-01

Incorporating different data processing methods, optical coherence tomography (OCT) has the ability for high-resolution angiography and quantitative flow velocity measurements. However, OCT angiography cannot provide quantitative information of flow velocities, and the velocity measurement based on Doppler OCT requires the determination of Doppler angles, which is a challenge in a complex vascular network. In this study, we report on a relative standard deviation OCT (RSD-OCT) method which provides both vascular network mapping and quantitative information for flow velocities within a wide range of Doppler angles. The RSD values are angle-insensitive within a wide range of angles, and a nearly linear relationship was found between the RSD values and the flow velocities. The RSD-OCT measurement in a rat cortex shows that it can quantify the blood flow velocities as well as map the vascular network in vivo.

Quantitative angle-insensitive flow measurement using relative standard deviation OCT.

PubMed

Zhu, Jiang; Zhang, Buyun; Qi, Li; Wang, Ling; Yang, Qiang; Zhu, Zhuqing; Huo, Tiancheng; Chen, Zhongping

2017-10-30

Incorporating different data processing methods, optical coherence tomography (OCT) has the ability for high-resolution angiography and quantitative flow velocity measurements. However, OCT angiography cannot provide quantitative information of flow velocities, and the velocity measurement based on Doppler OCT requires the determination of Doppler angles, which is a challenge in a complex vascular network. In this study, we report on a relative standard deviation OCT (RSD-OCT) method which provides both vascular network mapping and quantitative information for flow velocities within a wide range of Doppler angles. The RSD values are angle-insensitive within a wide range of angles, and a nearly linear relationship was found between the RSD values and the flow velocities. The RSD-OCT measurement in a rat cortex shows that it can quantify the blood flow velocities as well as map the vascular network in vivo .

75 FR 32178 - Release of Final Document Related to the Review of the National Ambient Air Quality Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-07

... ``cause or contribute to air pollution which may reasonably be anticipated to endanger public health or... National Ambient Air Quality Standards: Scope and Methods Plan for Health Risk and Exposure Assessment... Related to the Review of the National Ambient Air Quality Standards for Carbon Monoxide AGENCY...

Obtaining source current density related to irregularly structured electromagnetic target field inside human body using hybrid inverse/FDTD method.

PubMed

Han, Jijun; Yang, Deqiang; Sun, Houjun; Xin, Sherman Xuegang

2017-01-01

Inverse method is inherently suitable for calculating the distribution of source current density related with an irregularly structured electromagnetic target field. However, the present form of inverse method cannot calculate complex field-tissue interactions. A novel hybrid inverse/finite-difference time domain (FDTD) method that can calculate the complex field-tissue interactions for the inverse design of source current density related with an irregularly structured electromagnetic target field is proposed. A Huygens' equivalent surface is established as a bridge to combine the inverse and FDTD method. Distribution of the radiofrequency (RF) magnetic field on the Huygens' equivalent surface is obtained using the FDTD method by considering the complex field-tissue interactions within the human body model. The obtained magnetic field distributed on the Huygens' equivalent surface is regarded as the next target. The current density on the designated source surface is derived using the inverse method. The homogeneity of target magnetic field and specific energy absorption rate are calculated to verify the proposed method.

First attempts to obtain a reference drift curve for traditional olive grove's plantations following ISO 22866.

PubMed

Gil, Emilio; Llorens, Jordi; Gallart, Montserrat; Gil-Ribes, Jesús A; Miranda-Fuentes, Antonio

2018-06-15

The current standard for the field measurements of spray drift (ISO 22866) is the only official standard for drift measurements in field conditions for all type of crops, including bushes and trees. A series of field trials following all the requirements established in the standard were arranged in a traditional olive grove in Córdoba (south of Spain). The aims of the study were to evaluate the applicability of the current standard procedure to the particular conditions of traditional olive trees plantations, to evaluate the critical requirements for performing the tests and to obtain a specific drift curve for such as important and specific crop as olive trees in traditional plantations, considering the enormous area covered by this type of crop all around the world. Results showed that the field trials incur a very complex process due to the particular conditions of the crop and the very precise environmental requirements. Furthermore, the trials offered a very low level of repeatability as the drift values varied significantly from one spray application to the next, with the obtained results being closely related to the wind speed, even when considering the standard minimum value of 1 m·s -1 . The collector's placement with respect to the position of the isolated trees was determined as being critical since this substantially modifies the ground deposit in the first 5 m. Even though, a new drift curve for olive trees in traditional plantation has been defined, giving an interesting tool for regulatory aspects. Conclusions indicated that a deep review of the official standard is needed to allow its application to the most relevant orchard/fruit crops. Copyright © 2018 Elsevier B.V. All rights reserved.

30 CFR 20.0 - Compliance with the requirements necessary for obtaining approval.

Code of Federal Regulations, 2011 CFR

2011-07-01

... LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MINE LAMPS OTHER THAN STANDARD CAP LAMPS § 20.0 Compliance with the requirements necessary for obtaining approval. To receive approval of MSHA for any electric mine lamps other than standard cap lamps a manufacturer must comply with the...

30 CFR 20.0 - Compliance with the requirements necessary for obtaining approval.

Code of Federal Regulations, 2013 CFR

2013-07-01

... LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MINE LAMPS OTHER THAN STANDARD CAP LAMPS § 20.0 Compliance with the requirements necessary for obtaining approval. To receive approval of MSHA for any electric mine lamps other than standard cap lamps a manufacturer must comply with the...

30 CFR 20.0 - Compliance with the requirements necessary for obtaining approval.

Code of Federal Regulations, 2012 CFR

2012-07-01

... LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MINE LAMPS OTHER THAN STANDARD CAP LAMPS § 20.0 Compliance with the requirements necessary for obtaining approval. To receive approval of MSHA for any electric mine lamps other than standard cap lamps a manufacturer must comply with the...

30 CFR 20.0 - Compliance with the requirements necessary for obtaining approval.

Code of Federal Regulations, 2014 CFR

2014-07-01

... LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MINE LAMPS OTHER THAN STANDARD CAP LAMPS § 20.0 Compliance with the requirements necessary for obtaining approval. To receive approval of MSHA for any electric mine lamps other than standard cap lamps a manufacturer must comply with the...

Quantifying relative importance: Computing standardized effects in models with binary outcomes

USGS Publications Warehouse

Grace, James B.; Johnson, Darren; Lefcheck, Jonathan S.; Byrnes, Jarrett E.K.

2018-01-01

Results from simulation studies show that both the LT and OE methods of standardization support a similarly-broad range of coefficient comparisons. The LT method estimates effects that reflect underlying latent-linear propensities, while the OE method computes a linear approximation for the effects of predictors on binary responses. The contrast between assumptions for the two methods is reflected in persistently weaker standardized effects associated with OE standardization. Reliance on standard deviations for standardization (the traditional approach) is critically examined and shown to introduce substantial biases when predictors are non-Gaussian. The use of relevant ranges in place of standard deviations has the capacity to place LT and OE standardized coefficients on a more comparable scale. As ecologists address increasingly complex hypotheses, especially those that involve comparing the influences of different controlling factors (e.g., top-down versus bottom-up or biotic versus abiotic controls), comparable coefficients become a necessary component for evaluations.

An evaluation of the relative safety of U.S. mining explosion-protected equipment approval requirements versus international standards

PubMed Central

Calder, W.; Snyder, D.; Burr, J.F.

2018-01-01

This paper provides a determination of the equivalent level of protection of the international standards relative to similar criteria used by the U.S. Mine Safety and Health Administration (MSHA) to approve two-fault intrinsically safe (IS) stand-alone equipment. U.S. mining law requires such a determination for MSHA to use alternatives to existing standards. The primary issue is to demonstrate that the international standards for equipment evaluation will provide at least the same level of protection for miners as the document currently used by MSHA. PMID:29780219

Standard map in magnetized relativistic systems: fixed points and regular acceleration.

PubMed

de Sousa, M C; Steffens, F M; Pakter, R; Rizzato, F B

2010-08-01

We investigate the concept of a standard map for the interaction of relativistic particles and electrostatic waves of arbitrary amplitudes, under the action of external magnetic fields. The map is adequate for physical settings where waves and particles interact impulsively, and allows for a series of analytical result to be exactly obtained. Unlike the traditional form of the standard map, the present map is nonlinear in the wave amplitude and displays a series of peculiar properties. Among these properties we discuss the relation involving fixed points of the maps and accelerator regimes.

Preparation of high purity plutonium oxide for radiochemistry instrument calibration standards and working standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wong, A.S.; Stalnaker, N.D.

1997-04-01

Due to the lack of suitable high level National Institute of Standards and Technology (NIST) traceable plutonium solution standards from the NIST or commercial vendors, the CST-8 Radiochemistry team at Los Alamos National Laboratory (LANL) has prepared instrument calibration standards and working standards from a well-characterized plutonium oxide. All the aliquoting steps were performed gravimetrically. When a {sup 241}Am standardized solution obtained from a commercial vendor was compared to these calibration solutions, the results agreed to within 0.04% for the total alpha activity. The aliquots of the plutonium standard solutions and dilutions were sealed in glass ampules for long termmore » storage.« less

N400 Event-Related Potential and Standardized Measures of Reading in Late Elementary School Children: Correlated or Independent?

PubMed Central

Coch, Donna; Benoit, Clarisse

2015-01-01

We investigated whether and how standardized behavioral measures of reading and electrophysiological measures of reading were related in 72 typically developing, late elementary school children. Behavioral measures included standardized tests of spelling, phonological processing, vocabulary, comprehension, naming speed, and memory. Electrophysiological measures were composed of the amplitude of the N400 component of the event-related potential waveform elicited by real words, pseudowords, nonpronounceable letter strings, and strings of letter-like symbols (false fonts). The only significant brain-behavior correlations were between standard scores on the vocabulary test and N400 mean amplitude to real words (r = −.272) and pseudowords (r = −.235). We conclude that, while these specific sets of standardized behavioral and electrophysiological measures both provide an index of reading, for the most part, they are independent and draw upon different underlying processing resources. [T]o completely analyze what we do when we read… would be to describe very many of the most intricate workings of the human mind, as well as to unravel the tangled story of the most remarkable specific performance that civilization has learned in all its history(Huey, 1908/1968, p. 3). PMID:26346715

10 CFR 20.2002 - Method for obtaining approval of proposed disposal procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Method for obtaining approval of proposed disposal procedures. 20.2002 Section 20.2002 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Waste Disposal § 20.2002 Method for obtaining approval of proposed disposal procedures. A licensee...

10 CFR 20.2002 - Method for obtaining approval of proposed disposal procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Method for obtaining approval of proposed disposal procedures. 20.2002 Section 20.2002 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Waste Disposal § 20.2002 Method for obtaining approval of proposed disposal procedures. A licensee...

10 CFR 20.2002 - Method for obtaining approval of proposed disposal procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Method for obtaining approval of proposed disposal procedures. 20.2002 Section 20.2002 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Waste Disposal § 20.2002 Method for obtaining approval of proposed disposal procedures. A licensee...

10 CFR 20.2002 - Method for obtaining approval of proposed disposal procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Method for obtaining approval of proposed disposal procedures. 20.2002 Section 20.2002 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Waste Disposal § 20.2002 Method for obtaining approval of proposed disposal procedures. A licensee...

10 CFR 20.2002 - Method for obtaining approval of proposed disposal procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Method for obtaining approval of proposed disposal procedures. 20.2002 Section 20.2002 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Waste Disposal § 20.2002 Method for obtaining approval of proposed disposal procedures. A licensee...

Relating road salt to exceedances of the water quality standard for chloride in New Hampshire streams.

PubMed

Trowbridge, Philip R; Kahl, J Steve; Sassan, Dari A; Heath, Douglas L; Walsh, Edward M

2010-07-01

Six watersheds in New Hampshire were studied to determine the effects of road salt on stream water quality. Specific conductance in streams was monitored every 15 min for one year using dataloggers. Chloride concentrations were calculated from specific conductance using empirical relationships. Stream chloride concentrations were directly correlated with development in the watersheds and were inversely related to streamflow. Exceedances of the EPA water quality standard for chloride were detected in the four watersheds with the most development. The number of exceedances during a year was linearly related to the annual average concentration of chloride. Exceedances of the water quality standard were not predicted for streams with annual average concentrations less than 102 mg L(-1). Chloride was imported into three of the watersheds at rates ranging from 45 to 98 Mg Cl km(-2) yr(-1). Ninety-one percent of the chloride imported was road salt for deicing roadways and parking lots. A simple, mass balance equation was shown to predict annual average chloride concentrations from streamflow and chloride import rates to the watershed. This equation, combined with the apparent threshold for exceedances of the water quality standard, can be used for screening-level TMDLs for road salt in impaired watersheds.

Related Rates and the Speed of Light.

ERIC Educational Resources Information Center

Althoen, S. C.; Weidner, J. F.

1985-01-01

Standard calculus textbooks often include a related rates problem involving light cast onto a straight line by a revolving light source. Mathematical aspects to these problems (both in the solution and in the method by which that solution is obtained) are examined. (JN)

20 CFR 726.4 - Who must obtain insurance coverage.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Who must obtain insurance coverage. 726.4 Section 726.4 Employees' Benefits EMPLOYMENT STANDARDS ADMINISTRATION, DEPARTMENT OF LABOR FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, AS AMENDED BLACK LUNG BENEFITS; REQUIREMENTS FOR COAL MINE OPERATOR...

When self-destructive thoughts flash through the mind: Failure to meet standards affects the accessibility of suicide-related thoughts.

PubMed

Chatard, Armand; Selimbegović, Leila

2011-04-01

When individuals realize that they fail to attain important standards or expectations, they may be motivated to escape the self, which could lead thoughts of suicide to become more accessible. Six studies examined this hypothesis, mainly derived from escape theory (Baumeister, 1990). The results indicated that whenever individuals realize that they fail to attain an important standard, they experience increased accessibility of suicide-related thoughts (Studies 1-6). In line with the idea that such effects reflect motivations to escape from negative self-awareness, they were especially pronounced when associated with high levels of self-consciousness and escapist motivations (Study 1) and with a large discrepancy between self and standards (Studies 2-4). Moreover, failure to attain standards increased suicide-thought accessibility along with the desire for an altered state of consciousness (Study 5). Finally, increases in suicide-thought accessibility after failure were associated with simultaneous increases in accessibility of general concepts related to escape (Study 6). Implications of these findings for escape and terror management theories are discussed.

Selected School Laws and Standards. A Summary Containing Specific School Laws Relating to Area Schools, Standards for Area Community Colleges and Area Vocational Schools.

ERIC Educational Resources Information Center

Iowa State Dept. of Public Instruction, Des Moines. Area Schools and Career Education Branch.

A selected summary is provided of: (1) Iowa school laws relating to area schools; and (2) standards for area community colleges and area vocational schools. Part one contains the specific Chapters (280A and 286A, Code of Iowa) which pertain to the area schools. Chapter 280A deals with the organization of the school and county systems; plans for…

Improving electrofishing catch consistency by standardizing power

USGS Publications Warehouse

Burkhardt, Randy W.; Gutreuter, Steve

1995-01-01

The electrical output of electrofishing equipment is commonly standardized by using either constant voltage or constant amperage, However, simplified circuit and wave theories of electricity suggest that standardization of power (wattage) available for transfer from water to fish may be critical for effective standardization of electrofishing. Electrofishing with standardized power ensures that constant power is transferable to fish regardless of water conditions. The in situ performance of standardized power output is poorly known. We used data collected by the interagency Long Term Resource Monitoring Program (LTRMP) in the upper Mississippi River system to assess the effectiveness of standardizing power output. The data consisted of 278 electrofishing collections, comprising 9,282 fishes in eight species groups, obtained during 1990 from main channel border, backwater, and tailwater aquatic areas in four reaches of the upper Mississippi River and one reach of the Illinois River. Variation in power output explained an average of 14.9% of catch variance for night electrofishing and 12.1 % for day electrofishing. Three patterns in catch per unit effort were observed for different species: increasing catch with increasing power, decreasing catch with increasing power, and no power-related pattern. Therefore, in addition to reducing catch variation, controlling power output may provide some capability to select particular species. The LTRMP adopted standardized power output beginning in 1991; standardized power output is adjusted for variation in water conductivity and water temperature by reference to a simple chart. Our data suggest that by standardizing electrofishing power output, the LTRMP has eliminated substantial amounts of catch variation at virtually no additional cost.

Relative resilience to noise of standard and sequential approaches to measurement-based quantum computation

NASA Astrophysics Data System (ADS)

Gallagher, C. B.; Ferraro, A.

2018-05-01

A possible alternative to the standard model of measurement-based quantum computation (MBQC) is offered by the sequential model of MBQC—a particular class of quantum computation via ancillae. Although these two models are equivalent under ideal conditions, their relative resilience to noise in practical conditions is not yet known. We analyze this relationship for various noise models in the ancilla preparation and in the entangling-gate implementation. The comparison of the two models is performed utilizing both the gate infidelity and the diamond distance as figures of merit. Our results show that in the majority of instances the sequential model outperforms the standard one in regard to a universal set of operations for quantum computation. Further investigation is made into the performance of sequential MBQC in experimental scenarios, thus setting benchmarks for possible cavity-QED implementations.

Inherited defects in pedigree dogs. Part 1: disorders related to breed standards.

PubMed

Asher, Lucy; Diesel, Gillian; Summers, Jennifer F; McGreevy, Paul D; Collins, Lisa M

2009-12-01

The United Kingdom pedigree-dog industry has faced criticism because certain aspects of dog conformation stipulated in the UK Kennel Club breed standards have a detrimental impact on dog welfare. A review of conformation-related disorders was carried out in the top 50 UK Kennel Club registered breeds using systematic searches of existing information. A novel index to score severity of disorders along a single scale was also developed and used to conduct statistical analyses to determine the factors affecting reported breed predisposition to defects. According to the literature searched, each of the top 50 breeds was found to have at least one aspect of its conformation predisposing it to a disorder; and 84 disorders were either directly or indirectly associated with conformation. The Miniature poodle, Bulldog, Pug and Basset hound had most associations with conformation-related disorders. Further research on prevalence and severity is required to assess the impact of different disorders on the welfare of affected breeds.

Standard on microbiological management of fluids for hemodialysis and related therapies by the Japanese Society for Dialysis Therapy 2008.

PubMed

Kawanishi, Hideki; Akiba, Takashi; Masakane, Ikuto; Tomo, Tadashi; Mineshima, Michio; Kawasaki, Tadayuki; Hirakata, Hideki; Akizawa, Tadao

2009-04-01

The Committee of Scientific Academy of the Japanese Society for Dialysis Therapy (JSDT) proposes a new standard on microbiological management of fluids for hemodialysis and related therapies. This standard is within the scope of the International Organization for Standardization (ISO), which is currently under revision. This standard is to be applied to the central dialysis fluid delivery systems (CDDS), which are widely used in Japan. In this standard, microbiological qualities for dialysis water and dialysis fluids are clearly defined by endotoxin level and bacterial count. The qualities of dialysis fluids were classified into three levels: standard, ultrapure, and online prepared substitution fluid. In addition, the therapeutic application of each dialysis fluid is clarified. Since high-performance dialyzers are frequently used in Japan, the standard recommends that ultrapure dialysis fluid be used for all dialysis modalities at all dialysis facilities. It also recommends that the dialysis equipment safety management committee at each facility should validate the microbiological qualities of online prepared substitution fluid.

41 CFR 105-64.107 - What standards of conduct apply to employees with privacy-related responsibilities?

Code of Federal Regulations, 2010 CFR

2010-07-01

... conduct apply to employees with privacy-related responsibilities? 105-64.107 Section 105-64.107 Public... SERVICES ADMINISTRATION Regional Offices-General Services Administration 64-GSA PRIVACY ACT RULES 64.1-Policies and Responsibilities § 105-64.107 What standards of conduct apply to employees with privacy...

41 CFR 105-64.107 - What standards of conduct apply to employees with privacy-related responsibilities?

Code of Federal Regulations, 2014 CFR

2014-01-01

... conduct apply to employees with privacy-related responsibilities? 105-64.107 Section 105-64.107 Public... SERVICES ADMINISTRATION Regional Offices-General Services Administration 64-GSA PRIVACY ACT RULES 64.1-Policies and Responsibilities § 105-64.107 What standards of conduct apply to employees with privacy...

Sample sizes needed for specified margins of relative error in the estimates of the repeatability and reproducibility standard deviations.

PubMed

McClure, Foster D; Lee, Jung K

2005-01-01

Sample size formulas are developed to estimate the repeatability and reproducibility standard deviations (Sr and S(R)) such that the actual error in (Sr and S(R)) relative to their respective true values, sigmar and sigmaR, are at predefined levels. The statistical consequences associated with AOAC INTERNATIONAL required sample size to validate an analytical method are discussed. In addition, formulas to estimate the uncertainties of (Sr and S(R)) were derived and are provided as supporting documentation. Formula for the Number of Replicates Required for a Specified Margin of Relative Error in the Estimate of the Repeatability Standard Deviation.

40 CFR 80.271 - How can a small refiner obtain an adjustment of its 2004-2007 per-gallon cap standard?

Code of Federal Regulations, 2010 CFR

2010-07-01

... adjustment of its 2004-2007 per-gallon cap standard? 80.271 Section 80.271 Protection of Environment...-2007 per-gallon cap standard? (a) EPA may in its discretion adjust the small refiner per-gallon cap... that the per-gallon cap creates; (2) The refiner's proposed adjusted per-gallon cap standard and the...

The effects of the lower ignition propensity cigarettes standard in Estonia: time-series analysis.

PubMed

Saar, Indrek

2018-02-01

In 2011, the lower ignition propensity (LIP) standard for cigarettes was implemented in the European Union. Evidence about the impact of that safety measure is scarce. The aim of this paper is to examine the effects of the LIP standard on fire safety in Estonia. The absolute level of smoking-related fire incidents and related deaths was modelled using dynamic time-series regression analysis. The data about house fire incidents for the 2007-2013 period were obtained from the Estonian Rescue Board. Implementation of the LIP standard has reduced the monthly level of smoking-related fires by 6.2 (p<0.01, SE=1.95) incidents and by 26% (p<0.01, SE=9%) when estimated on the log scale. Slightly weaker evidence was found about the fatality reduction effects of the LIP regulation. All results were confirmed through counterfactual models for non-smoking-related fire incidents and deaths. This paper indicates that implementation of the LIP cigarettes standard has improved fire safety in Estonia. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Case reports: Publication standards in forensic psychiatry.

PubMed

Hanson, Annette; Martinez, Richard; Candilis, Philip J

2014-01-01

Psychiatrists who publish case reports are required to seek informed consent from their subjects on the basis of the ethics-related obligation to maintain patient confidentiality. Academic journals have developed editorial standards to fulfill this obligation. Forensic evaluations do not create a doctor-patient relationship in the traditional sense, and information obtained through a forensic evaluation may also be found in the public domain. This public exposure is particularly likely, given the development of open access publishing standards, online journals, and increasing professional involvement in social media. This article outlines the ethics of informed consent in published case reports for general and forensic psychiatry and offers recommendations for forensic case study publishing. The authors suggest changes in the current requirements stated in The Journal for publication of case reports. © 2014 American Academy of Psychiatry and the Law.

Zinc transporter-8 autoantibodies improve prediction of type 1 diabetes in relatives positive for the standard biochemical autoantibodies.

PubMed

Yu, Liping; Boulware, David C; Beam, Craig A; Hutton, John C; Wenzlau, Janet M; Greenbaum, Carla J; Bingley, Polly J; Krischer, Jeffrey P; Sosenko, Jay M; Skyler, Jay S; Eisenbarth, George S; Mahon, Jeffrey L

2012-06-01

We assessed diabetes risk associated with zinc transporter-8 antibodies (ZnT8A), islet cell antibodies (ICA), and HLA type and age in relatives of people with type 1 diabetes with the standard biochemical autoantibodies (BAA) to insulin (IAA), GAD65 (GAD65A), and/or insulinoma-associated protein 2 antigen (IA-2A). For this analysis, 2,256 relatives positive for at least one BAA, of whom 142 developed diabetes, were tested for ZnT8A, ICA, and HLA genotype followed by biannual oral glucose tolerance tests. ZnT8A were also tested in 911 randomly chosen antibody-negative relatives. ZnT8A were associated with the other BAA (548 of 2,256 [24.3%] BAA(+) vs. 8 of 911 [0.8%] BAA(-), P < 0.001) and BAA number (177 of 1,683 [10.5%] single-, 221 of 384 [57.6%] double-, and 150 of 189 [79.4%] triple-BAA positivity, P < 0.001). The 4-year diabetes risk was higher in single BAA(+) relatives with ZnT8A than ZnT8A(-) relatives (31 vs. 7%, P < 0.001). In multivariable analysis, age ≤ 20 years (hazard ratio 2.13, P = 0.03), IA-2A (2.15, P = 0.005), IAA (1.73, P = 0.01), ICA (2.37, P = 0.002), and ZnT8A (1.87, P = 0.03) independently predicted diabetes, whereas HLA type (high and moderate vs. low risk) and GAD65A did not (P = 0.81 and 0.86, respectively). In relatives with one standard BAA, ZnT8A identified a subset at higher diabetes risk. ZnT8A predicted diabetes independently of ICA, the standard BAA, age, and HLA type. ZnT8A should be included in type 1 diabetes prediction and prevention studies.

Demographic and academic-related differences between standard-entry and graduate-entry nursing students: a prospective correlational survey.

PubMed

Everett, Bronwyn; Salamonson, Yenna; Trajkovski, Suza; Fernandez, Ritin

2013-07-01

Students who enroll in graduate-entry nursing programs are described as more highly motivated, scoring higher in most learning strategies, and achieving greater academic success than standard-entry nursing students. A prospective correlational design was used to compare the demographic and academic-related characteristics of standard-entry and graduate-entry nursing students in their first year of study. Between 2007 and 2011, students enrolled in the Bachelor of Nursing, Standard Entry and the Bachelor Nursing, Graduate Entry at a large Australian university were surveyed in the first year of their program. Data included English-language usage and time spent in paid work, as well as four dimensions of Pintrich's Motivated Strategies for Learning Questionnaire. Survey data was linked to students' academic grades at the end of the semester. A total of 730 students completed the survey and consented to collection of their academic grades. Graduate-entry students were more likely to be older (28.6 vs. 24.3 years, P < 0.001), and there was a higher percentage of males (25.2% vs. 15.9%, P = 0.003). Although no difference was identified between groups for use of Extrinsic Goal Orientation as a learning strategy, the graduate-entry students were more likely to identify Peer Learning, Help Seeking and Critical Thinking as strategies for learning than the standard-entry students (P < 0.001). Further, while this group of students achieved a higher mean GPA (4.8 vs. 4.0, P < 0.001) compared to the standard-entry students, regression analyses revealed that in both groups, lower levels of English-language proficiency and increased time spent in paid work were predictors of poorer academic performance. Similar to US-based studies, demographic and academic-related differences were identified between standard-entry and graduate-entry nursing students. However, the study also highlights lower levels of English-language proficiency and increased time spent in paid work negatively

Implementation of nuclear gage moisture standards.

DOT National Transportation Integrated Search

1976-01-01

A prepared dry sand standard representing zero moisture content was found to yield nuclear moisture readings similar to those obtained on a magnesium density block. Therefore, the magnesium block was adopted in place of the sand standard for use as a...

48 CFR 209.105-1 - Obtaining information.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Information Retrieval System (PPIRS), available at http://www.ppirs.gov. Information relating to contract... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the Excluded Parties List System, see PGI 209...

48 CFR 209.105-1 - Obtaining information.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Performance Information Retrieval System (PPIRS), available at http://www.ppirs.gov. Information relating to... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the System for Award Management Exclusions, see...

48 CFR 209.105-1 - Obtaining information.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Information Retrieval System (PPIRS), available at http://www.ppirs.gov. Information relating to contract... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the Excluded Parties List System, see PGI 209...

48 CFR 209.105-1 - Obtaining information.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Information Retrieval System (PPIRS), available at http://www.ppirs.gov. Information relating to contract... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the Excluded Parties List System, see PGI 209...

Standard surface-reflectance model and illuminant estimation

NASA Technical Reports Server (NTRS)

Tominaga, Shoji; Wandell, Brian A.

1989-01-01

A vector analysis technique was adopted to test the standard reflectance model. A computational model was developed to determine the components of the observed spectra and an estimate of the illuminant was obtained without using a reference white standard. The accuracy of the standard model is evaluated.

Standardization of a fluconazole bioassay and correlation of results with those obtained by high-pressure liquid chromatography.

PubMed Central

Rex, J H; Hanson, L H; Amantea, M A; Stevens, D A; Bennett, J E

1991-01-01

An improved bioassay for fluconazole was developed. This assay is sensitive in the clinically relevant range (2 to 40 micrograms/ml) and analyzes plasma, serum, and cerebrospinal fluid specimens; bioassay results correlate with results obtained by high-pressure liquid chromatography (HPLC). Bioassay and HPLC analyses of spiked plasma, serum, and cerebrospinal fluid samples (run as unknowns) gave good agreement with expected values. Analysis of specimens from patients gave equivalent results by both HPLC and bioassay. HPLC had a lower within-run coefficient of variation (less than 2.5% for HPLC versus less than 11% for bioassay) and a lower between-run coefficient of variation (less than 5% versus less than 12% for bioassay) and was more sensitive (lower limit of detection, 0.1 micrograms/ml [versus 2 micrograms/ml for bioassay]). The bioassay is, however, sufficiently accurate and sensitive for clinical specimens, and its relative simplicity, low sample volume requirement, and low equipment cost should make it the technique of choice for analysis of routine clinical specimens. PMID:1854166

Proposed Rule for Amendments Related to: Tier 3 Motor Vehicle Emission and Fuel Standards, Nonroad Engine and Equipment

EPA Pesticide Factsheets

Link to Federal Register Notice from February 19, 2015 announcing Amendments Related to: Tier 3 Motor Vehicle Emission and Fuel Standards, Nonroad Engine and Equipment Programs, and MARPOL Annex VI Implementation.

Glass transition temperatures of liquid prepolymers obtained by thermal penetrometry

NASA Technical Reports Server (NTRS)

Potts, J. E., Jr.; Ashcraft, A. C.

1973-01-01

Thermal penetrometry is experimental technique for detecting temperature at which frozen prepolymer becomes soft enough to be pierced by weighted penetrometer needle; temperature at which this occurs is called penetration temperature. Apparatus used to obtain penetration temperatures can be set up largely from standard parts.

In Terms of the Logarithmic Mean Annual Seismicity Rate and Its Standard Deviation to Present the Gutenberg-Richter Relation

NASA Astrophysics Data System (ADS)

Chen, K. P.; Chang, W. Y.; Tsai, Y. B.

2016-12-01

The main purpose of this study is to apply an innovative approach to assess the median annual seismicity rates and their dispersions for Taiwan earthquakes in different depth ranges. This approach explicitly represents the Gutenberg-Richter (G-R) relation in terms of both the logarithmic mean annual seismicity rate and its standard deviation, instead of just the arithmetic mean. We use the high-quality seismicity data obtained by the Institute of Earth Sciences (IES) and the Central Weather Bureau (CWB) in an earthquake catalog with homogenized moment magnitudes from 1975 to 2014 for our study. The selected data set is shown to be complete for Mw>3.0. We first use it to illustrate the merits of our new approach for dampening the influence of spuriously large or small event numbers in individual years on the determination of median annual seismicity rate and its standard deviation. We further show that the logarithmic annual seismicity rates indeed possess a well-behaved lognormal distribution. The final results are summarized as follows: log10N=5.75-0.90Mw+/-(0.245-0.01Mw) for focal depth 0 300 km; log10N=5.78-0.94Mw+/-(0.195+0.01Mw) for focal depth 0-35 km; log10N=4.72-0.89Mw+/-(-0.075+0.075Mw) for focal depth 35-70 km; and log10N=4.69-0.88Mw+/-(-0.47+0.16Mw) for focal depth 70-300 km. Above results show distinctly different values for the parameters a and b in the G-R relations for Taiwan earthquakes in different depth ranges. These analytical equations can be readily used for comprehensive probabilistic seismic hazard assessment. Furthermore, a numerical table on the corresponding median annual seismicity rates and their upper and lower bounds at median +/- one standard deviation levels, as calculated from above analytical equations, is presented at the end. This table offers an overall glance of the estimated median annual seismicity rates and their dispersions for Taiwan earthquakes of various magnitudes and focal depths. It is interesting to point out that

New conducted electrical weapons: Electrical safety relative to relevant standards.

PubMed

Panescu, Dorin; Nerheim, Max; Kroll, Mark W; Brave, Michael A

2017-07-01

We have previously published about TASER ® conducted electrical weapons (CEW) compliance with international standards. CEWs deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. An eXperimental Rotating-Field (XRF) waveform CEW and the X2 CEW are new 2-shot electrical weapon models designed to target a precise amount of delivered charge per pulse. They both can deploy 1 or 2 dart pairs, delivered by 2 separate cartridges. Additionally, the XRF controls delivery of incapacitating pulses over 4 field vectors, in a rotating sequence. As in our previous study, we were motivated by the need to understand the cardiac safety profile of these new CEWs. The goal of this paper is to analyze the nominal electrical outputs of TASER XRF and X2 CEWs in reference to provisions of all relevant international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of several TASER XRF and X2 CEWs were measured under normal operating conditions. The measurements were compared against manufacturer specifications. CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2, IEC 60601-1 and BS EN 60601-1. Our study confirmed that the nominal electrical outputs of TASER XRF and X2 CEWs lie within safety bounds specified by relevant standards.

A Synthetic Calcite Standard for Determination of Relative Mn/Cr Sensitivity Factor

NASA Astrophysics Data System (ADS)

Fujiya, W.; Ichimura, K.; Takahata, N.; Sugiura, N.; Sano, Y.

2009-12-01

Primitive chondrites which suffered from aqueous alteration often contain carbonates such as calcites, dolomites and breunnerites. 53Mn-53Cr decay system (half-life: 3.7 Myr) is applicable to dating their precipitation and many authors have measured their Mn-Cr ages using the SIMS. However, the relative Mn/Cr sensitivity factor: RSF (measured Mn+/Cr+ ratio divided by the true ratio) is not well established due to the absence of suitable standards, therefore the ages have systematic uncertainties. We prepared a synthetic Mn and Cr bearing calcite to evaluate the Mn/Cr RSF. Here we report the technical details of preparation for the standard and its Mn/Cr RSF. We also measured the Mn/Cr RSF of San Carlos olivine which is often assumed to be the same as that of a carbonate, and compared it with that of our synthetic calcite. The Cr-bearing calcite was produced in a N2 filled closed system by the reaction Ca2+ + CO32- = CaCO3 in an aqueous solution. The reaction proceeded by continuous addition of ammonium carbonate vapor to the solution. The crystal size of the calcite was ~300 μm. A small amount of hydrazine was added to the solution in order to keep chromous ion from oxidation. Mn and Cr concentrations in the calcite grains were determined by the SEM-EDS. A weak, defocused beam was used due to prevent electron beam damage. In a spherical grain, radial zoning of Mn and Cr concentrations occur and they decrease towards the periphery. At the center of the grains, Mn and Cr concentrations are ~0.5 atomic % and the values of the Mn/Cr ratios are relatively constant. The Mn/Cr RSF was determined with the CAMECA NanoSIMS 50 at Ocean Research Institute of Univ. of Tokyo. A primary O- beam of ~1 nA and 5 μm diameter was used. 43Ca+, 52Cr+, 53Cr+ and 55Mn+ ions were analyzed in a combined peak-jumping/multi-detection mode. The total measurement time was typically ~20 minutes. The measurements were started after presputtering of 15 minutes. The mass resolution power was

Connecting dark matter annihilation to the vertex functions of Standard Model fermions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kumar, Jason; Light, Christopher, E-mail: jkumar@hawaii.edu, E-mail: lightc@hawaii.edu

We consider scenarios in which dark matter is a Majorana fermion which couples to Standard Model fermions through the exchange of charged mediating particles. The matrix elements for various dark matter annihilation processes are then related to one-loop corrections to the fermion-photon vertex, where dark matter and the charged mediators run in the loop. In particular, in the limit where Standard Model fermion helicity mixing is suppressed, the cross section for dark matter annihilation to various final states is related to corrections to the Standard Model fermion charge form factor. These corrections can be extracted in a gauge-invariant manner frommore » collider cross sections. Although current measurements from colliders are not precise enough to provide useful constraints on dark matter annihilation, improved measurements at future experiments, such as the International Linear Collider, could improve these constraints by several orders of magnitude, allowing them to surpass the limits obtainable by direct observation.« less

About non standard Lagrangians in cosmology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dimitrijevic, Dragoljub D.; Milosevic, Milan

A review of non standard Lagrangians present in modern cosmological models will be considered. Well known example of non standard Lagrangian is Dirac-Born-Infeld (DBI) type Lagrangian for tachyon field. Another type of non standard Lagrangian under consideration contains scalar field which describes open p-adic string tachyon and is called p-adic string theory Lagrangian. We will investigate homogenous cases of both DBI and p-adic fields and obtain Lagrangians of the standard type which have the same equations of motions as aforementioned non standard one.

Rating educational quality: factors in the erosion of professional standards.

PubMed

Albanese, M

1999-06-01

Changes in the health care environment are putting increasing pressure on medical schools to make faculty accountable and to document the quality of the medical education they provide. Faculty's ratings of students' performances and students' ratings of faculty's teaching are important elements in these efforts to document educational quality. This article discusses selected research related to factors affecting raters' judgments, analyzes how changes in the health care environment are influencing such judgments, and links these influences to the system that upholds professional standards. Ratings are known to have a positive bias (generosity error), provide limited discrimination, and often fail to document serious deficits. The potential sources of these problems relate to the mechanics of the rating task, the system used to obtain ratings, and factors affecting rater judgment. As managed care demands reduce the time faculty have for teaching, as system-wide disincentives to provide negative ratings proliferate, and as social engineering challenges, such as the Americans with Disabilities Act, impose differential standards for students, the natural tendency to avoid giving negative ratings becomes even harder to resist. Ultimately, these forces compromise the capability of faculty to uphold the standards of the profession. The author calls for a national effort to stem the erosion of those standards.

Analysis of linear measurements on 3D surface models using CBCT data segmentation obtained by automatic standard pre-set thresholds in two segmentation software programs: an in vitro study.

PubMed

Poleti, Marcelo Lupion; Fernandes, Thais Maria Freire; Pagin, Otávio; Moretti, Marcela Rodrigues; Rubira-Bullen, Izabel Regina Fischer

2016-01-01

The aim of this in vitro study was to evaluate the reliability and accuracy of linear measurements on three-dimensional (3D) surface models obtained by standard pre-set thresholds in two segmentation software programs. Ten mandibles with 17 silica markers were scanned for 0.3-mm voxels in the i-CAT Classic (Imaging Sciences International, Hatfield, PA, USA). Twenty linear measurements were carried out by two observers two times on the 3D surface models: the Dolphin Imaging 11.5 (Dolphin Imaging & Management Solutions, Chatsworth, CA, USA), using two filters(Translucent and Solid-1), and in the InVesalius 3.0.0 (Centre for Information Technology Renato Archer, Campinas, SP, Brazil). The physical measurements were made by another observer two times using a digital caliper on the dry mandibles. Excellent intra- and inter-observer reliability for the markers, physical measurements, and 3D surface models were found (intra-class correlation coefficient (ICC) and Pearson's r ≥ 0.91). The linear measurements on 3D surface models by Dolphin and InVesalius software programs were accurate (Dolphin Solid-1 > InVesalius > Dolphin Translucent). The highest absolute and percentage errors were obtained for the variable R1-R1 (1.37 mm) and MF-AC (2.53 %) in the Dolphin Translucent and InVesalius software, respectively. Linear measurements on 3D surface models obtained by standard pre-set thresholds in the Dolphin and InVesalius software programs are reliable and accurate compared with physical measurements. Studies that evaluate the reliability and accuracy of the 3D models are necessary to ensure error predictability and to establish diagnosis, treatment plan, and prognosis in a more realistic way.

48 CFR 209.105-1 - Obtaining information.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the Exclusions section of the System for Award... responsibility (see FAR 9.104-1(c)). One source of information relating to contractor performance is the Past...

International aerospace standards - An overview

NASA Astrophysics Data System (ADS)

Mason, J. L.

1983-10-01

Factors to be considered in adopting and extending international standards in the U.S. aerospace industry are reviewed. Cost-related advantages and disadvantages of standardization are weighed, and further obstacles are identified in the English/metric rivalry and the pacing of metrification. The problem of standard duplication is examined, and the issue of revenues from the sale of copyrighted documents describing standards is addressed. It is recommended that international metric-system standards be introduced, with proper timing, wherever possible, and that prompt negotiations be undertaken to prevent or resolve document-sales disagreements. The continuation of English-system standards for safety-related cockpit readouts and communications systems is suggested.

Primary Atomic Frequency Standards at NIST

PubMed Central

Sullivan, D. B.; Bergquist, J. C.; Bollinger, J. J.; Drullinger, R. E.; Itano, W. M.; Jefferts, S. R.; Lee, W. D.; Meekhof, D.; Parker, T. E.; Walls, F. L.; Wineland, D. J.

2001-01-01

The development of atomic frequency standards at NIST is discussed and three of the key frequency-standard technologies of the current era are described. For each of these technologies, the most recent NIST implementation of the particular type of standard is described in greater detail. The best relative standard uncertainty achieved to date for a NIST frequency standard is 1.5×10−15. The uncertainties of the most recent NIST standards are displayed relative to the uncertainties of atomic frequency standards of several other countries. PMID:27500017

Vaccine-related standard of care and willingness to respond to public health emergencies: a cross-sectional survey of California vaccine providers.

PubMed

Seib, Katherine; Barnett, Daniel J; Weiss, Paul S; Omer, Saad B

2012-12-17

Responding to a vaccine-related public health emergency involves a broad spectrum of provider types, some of whom may not routinely administer vaccines including obstetricians, pharmacists and other specialists. These providers may have less experience administering vaccines and thus less confidence or self-efficacy in doing so. Self-efficacy is known to have a significant impact on provider willingness to respond in emergency situations. We conducted a survey of 800 California vaccine providers to investigate standard of care, willingness to respond, and how vaccine-related standard of care impacts willingness to respond among these providers. We used linear regression to examine how willingness to respond was impacted by vaccine-related standard of care. Forty percent of respondents indicated that they had participated in emergency preparedness training, actual disaster response, or surge capacity initiatives with significant differences among provider types for all measures (p=0.007). When asked to identify barriers to responding to a public health emergency, respondents indicated that staff size or capacity, training and resources were the top concerns. Respondents in practices with a higher vaccine-related standard of care had a higher willing to respond index (β=0.190, p=0.001). Respondents who had participated in emergency training or actual emergency response had a higher willing to respond index (β=1.323, p<0.0001). Our study suggests that concerns about staff size and surge capacity need to be more explicitly addressed in current emergency preparedness training efforts. In the context of boosting response willingness, larger practice environments stand to benefit from self-efficacy focused training and exercise efforts that also incorporate standard of care. Copyright © 2012 Elsevier Ltd. All rights reserved.

Proposed standard-weight equations for brook trout

USGS Publications Warehouse

Hyatt, M.W.; Hubert, W.A.

2001-01-01

Weight and length data were obtained for 113 populations of brook trout Salvelinus fontinalis across the species' geographic range in North America to estimate a standard-weight (Ws) equation for this species. Estimation was done by applying the regression-line-percentile technique to fish of 120-620 mm total length (TL). The proposed metric-unit (g and mm) equation is log10Ws = -5.186 + 3.103 log10TL; the English-unit (lb and in) equivalent is log10Ws = -3.483 + 3.103 log10TL. No systematic length bias was evident in the relative-weight values calculated from these equations.

AUTOMATED DECONVOLUTION OF COMPOSITE MASS SPECTRA OBTAINED WITH AN OPEN-AIR IONIZATIONS SOURCE BASED ON EXACT MASSES AND RELATIVE ISOTIPIC ABUNDANCES

EPA Science Inventory

Chemicals dispersed by accidental, deliberate, or weather-related events must be rapidly identified to assess health risks. Mass spectra from high levels of analytes obtained using rapid, open-air ionization by a Direct Analysis in Real Time (DART®) ion source often contain

45 CFR 156.230 - Network adequacy standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

....230 Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Qualified Health Plan Minimum Certification Standards § 156.230 Network adequacy standards. (a) General...

45 CFR 156.230 - Network adequacy standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

....230 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Qualified Health Plan Minimum Certification Standards § 156.230 Network adequacy standards. (a) General...

45 CFR 156.230 - Network adequacy standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

....230 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Qualified Health Plan Minimum Certification Standards § 156.230 Network adequacy standards. (a) General...

An International Marine-Atmospheric 222Rn Measurement Intercomparison in Bermuda Part I: NIST Calibration and Methodology for Standardized Sample Additions

PubMed Central

Collé, R.; Unterweger, M. P.; Hodge, P. A.; Hutchinson, J. M. R.

1996-01-01

As part of an international 222Rn measurement intercomparison conducted at Bermuda in October 1991, NIST provided standardized sample additions of known, but undisclosed (“blind”) 222Rn concentrations that could be related to U.S. national standards. The standardized sample additions were obtained with a calibrated 226Ra source and a specially-designed manifold used to obtain well-known dilution factors from simultaneous flow-rate measurements. The additions were introduced over sampling periods of several hours (typically 4 h) into a common streamline on a sampling tower used by the participating laboratories for their measurements. The standardized 222Rn activity concentrations for the intercomparison ranged from approximately 2.5 Bq · m−3 to 35 Bq · m−3 (of which the lower end of this range approached concentration levels for ambient Bermudian air) and had overall uncertainties, approximating a 3 standard deviation uncertainty interval, of about 6 % to 13 %. This paper describes the calibration and methodology for the standardized sample additions. PMID:27805090

How To Obtain Aerial Photographs

USGS Publications Warehouse

,

1999-01-01

The U.S. Geological Survey (USGS) maintains an informational data base of aerial photographic coverage of the United States and its territories that dates back to the 1940?s. This information describes photographic projects from the USGS, other Federal, State, and local government agencies, and commercial firms. The pictures on this page show a part of a standard 9- by 9-inch photograph and the results obtained by enlarging the original photograph two and four times. Compare the size of the Qualcomm Stadium, Jack Murphy Field, in San Diego, Calif, and the adjacent parking lot and freeways shown at the different scales. USGS Earth Science Information Center (ESIC) representatives will assist you in locating and ordering photographs. Please submit the completed checklist and a marked map showing your area of interest to any ESIC.

Sunglasses and sunglass standards.

PubMed

Dain, Stephen J

2003-03-01

Sunglasses and sunglass standards are reviewed from the point of view of the history of sunglasses and the development of sunglass standards. The need for eye protection from solar radiation is discussed and the provisions of the various national sunglass standards are discussed in relation to that need.

Characterizing Vaccinium berry Standard Reference Materials by GC-MS using NIST spectral libraries.

PubMed

Lowenthal, Mark S; Andriamaharavo, Nirina R; Stein, Stephen E; Phinney, Karen W

2013-05-01

A gas chromatography-mass spectrometry (GC-MS)-based method was developed for qualitative characterization of metabolites found in Vaccinium fruit (berry) dietary supplement Standard Reference Materials (SRMs). Definitive identifications are provided for 98 unique metabolites determined among six Vaccinium-related SRMs. Metabolites were enriched using an organic liquid/liquid extraction, and derivatized prior to GC-MS analysis. Electron ionization (EI) fragmentation spectra were searched against EI spectra of authentic standards compiled in the National Institute of Standards and Technology's mass spectral libraries, as well as spectra selected from the literature. Metabolite identifications were further validated using a retention index match along with prior probabilities and were compared with results obtained in a previous effort using collision-induced dissociation (CID) MS/MS datasets from liquid chromatography coupled to mass spectrometry experiments. This manuscript describes a nontargeted metabolite profile of Vaccinium materials, compares results among related materials and from orthogonal experimental platforms, and discusses the feasibility and development of using mass spectral library matching for nontargeted metabolite identification.

22 CFR 305.4 - Selection standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Selection standards. 305.4 Section 305.4 Foreign Relations PEACE CORPS ELIGIBILITY AND STANDARDS FOR PEACE CORPS VOLUNTEER SERVICE § 305.4 Selection standards. To qualify for selection for overseas service as a Peace Corps Volunteer, applicants must...

EBMT transplant centers with FACT-JACIE accreditation have significantly better compliance with related donor care standards

PubMed Central

Anthias, Chloe; O'Donnell, Paul V; Kiefer, Deidre M; Yared, Jean; Norkin, Maxim; Anderlini, Paolo; Savani, Bipin N; Diaz, Miguel A; Bitan, Menachem; Halter, Joerg P; Logan, Brent R; Switzer, Galen E; Pulsipher, Michael A; Confer, Dennis L; Shaw, Bronwen E

2016-01-01

Previous studies have identified healthcare practices that may place undue pressure on related donors (RDs) of hematopoietic cell products, and an increase in serious adverse events associated with morbidities in this population. As a result, specific requirements to safeguard RD health have been introduced to FACT-JACIE Standards, but the impact of accreditation on RD care has not previously been evaluated. A survey of transplant program directors of EBMT member centers was conducted by the Donor Health and Safety Working Committee of the Center for International Blood and Marrow Transplant Research (CIBMTR) to test the hypothesis that RD care in FACT-JACIE accredited centers is more closely aligned with international consensus donor care recommendations than RD care delivered in centers without accreditation. Responses were received from 39% of 304 centers. Our results show that practice in accredited centers was much closer to recommended standards as compared to non-accredited centers. Specifically, a higher percentage of accredited centers use eligibility criteria to assess RDs (93% versus 78%; P=0.02) and a lower percentage have a single physician simultaneously responsible for a RD and their recipient (14% versus 35%; P=0.008). In contrast, where regulatory standards do not exist, both accredited and non-accredited centers fell short of accepted best practice. These results raise concerns that despite improvements in care, current practice can place undue pressure on donors, and may increase the risk of donation-associated adverse events. We recommend measures to address these issues through enhancement of regulatory standards as well as national initiatives to standardize RD care. PMID:26597079

Professional technical standards in colleges and schools of pharmacy.

PubMed

Berry, Tricia M; Chichester, Clinton O; Lundquist, Lisa M; Sanoski, Cynthia A; Woodward, Donald A; Worley, Marcia M; Early, Johnnie L

2011-04-11

To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study.

Management Reporting Standards for Educational Institutions: Fund Raising and Related Activities.

ERIC Educational Resources Information Center

National Association of College and University Business Officers, Washington, DC.

A set of definitions are presented to create common cost and gift reporting standards for fund raisers and business officers at colleges, universities, and independent secondary schools. The objective is to bring clarity and consistency to the gift reporting process. In addition, the standards and management reports formats provide useful tools…

20 CFR 30.722 - How are subpoenas or advisory opinions obtained?

Code of Federal Regulations, 2011 CFR

2011-04-01

... medical standards, medical ethics or medical regulation to a competent recognized or professional... for Medical Providers Exclusion of Providers § 30.722 How are subpoenas or advisory opinions obtained? (a) In exclusion proceedings involving medical services provided under Part B of the Act only, the...

5 CFR 2411.5 - Procedure for obtaining information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Procedure for obtaining information. 2411.5 Section 2411.5 Administrative Personnel FEDERAL LABOR RELATIONS AUTHORITY, GENERAL COUNSEL OF THE... OFFICIAL INFORMATION § 2411.5 Procedure for obtaining information. (a) Authority/General Counsel/Panel/IG...

SGML and Related Standards: New Directions as the Second Decade Begins.

ERIC Educational Resources Information Center

Mason, James David

1997-01-01

ISO--International Organization for Standards highlights the activities of WG8 (Working Group 8 of ISO) in the alignment of standards for a common tree model and common query languages. Examines the how Document Style Semantics and Specification Language (DSSSL) and HyTime make documents easier to work with and more powerful in their ability to…

Patient Protection and Affordable Care Act; standards related to essential health benefits, actuarial value and accreditation. Final rule.

PubMed

2013-02-25

This final rule sets forth standards for health insurance issuers consistent with title I of the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act of 2010, referred to collectively as the Affordable Care Act. Specifically, this final rule outlines Exchange and issuer standards related to coverage of essential health benefits and actuarial value. This rule also finalizes a timeline for qualified health plans to be accredited in Federally-facilitated Exchanges and amends regulations providing an application process for the recognition of additional accrediting entities for purposes of certification of qualified health plans.

Health-Related Benefits of Attaining the 8-Hr Ozone Standard

PubMed Central

Hubbell, Bryan J.; Hallberg, Aaron; McCubbin, Donald R.; Post, Ellen

2005-01-01

During the 2000–2002 time period, between 36 and 56% of ozone monitors each year in the United States failed to meet the current ozone standard of 80 ppb for the fourth highest maximum 8-hr ozone concentration. We estimated the health benefits of attaining the ozone standard at these monitors using the U.S. Environmental Protection Agency’s Environmental Benefits Mapping and Analysis Program. We used health impact functions based on published epidemiologic studies, and valuation functions derived from the economics literature. The estimated health benefits for 2000 and 2001 are similar in magnitude, whereas the results for 2002 are roughly twice that of each of the prior 2 years. The simple average of health impacts across the 3 years includes reductions of 800 premature deaths, 4,500 hospital and emergency department admissions, 900,000 school absences, and > 1 million minor restricted activity days. The simple average of benefits (including premature mortality) across the 3 years is $5.7 billion [90% confidence interval (CI), 0.6–15.0] for the quadratic rollback simulation method and $4.9 billion (90% CI, 0.5–14.0) for the proportional rollback simulation method. Results are sensitive to the form of the standard and to assumptions about background ozone levels. If the form of the standard is based on the first highest maximum 8-hr concentration, impacts are increased by a factor of 2–3. Increasing the assumed hourly background from zero to 40 ppb reduced impacts by 30 and 60% for the proportional and quadratic attainment simulation methods, respectively. PMID:15626651

A method to implement fine-grained access control for personal health records through standard relational database queries.

PubMed

Sujansky, Walter V; Faus, Sam A; Stone, Ethan; Brennan, Patricia Flatley

2010-10-01

Online personal health records (PHRs) enable patients to access, manage, and share certain of their own health information electronically. This capability creates the need for precise access-controls mechanisms that restrict the sharing of data to that intended by the patient. The authors describe the design and implementation of an access-control mechanism for PHR repositories that is modeled on the eXtensible Access Control Markup Language (XACML) standard, but intended to reduce the cognitive and computational complexity of XACML. The authors implemented the mechanism entirely in a relational database system using ANSI-standard SQL statements. Based on a set of access-control rules encoded as relational table rows, the mechanism determines via a single SQL query whether a user who accesses patient data from a specific application is authorized to perform a requested operation on a specified data object. Testing of this query on a moderately large database has demonstrated execution times consistently below 100ms. The authors include the details of the implementation, including algorithms, examples, and a test database as Supplementary materials. Copyright © 2010 Elsevier Inc. All rights reserved.

Shipyard Standards Program Development Guide

DTIC Science & Technology

1992-10-01

Given the opportunity, designers will use designs that have worked for them in the past . Unfortunately, not all designers have the same experience base...standards formally approved by shipyard management? The subject of labor productivity standards has received considerable attention during the past decade. A...research into this consideration during the past decade. References [23], [24], [25], [26], and [27] have reported beneficial results obtained by getting the

Evaluation of the Neutron Data Standards

NASA Astrophysics Data System (ADS)

Carlson, A. D.; Pronyaev, V. G.; Capote, R.; Hale, G. M.; Chen, Z.-P.; Duran, I.; Hambsch, F.-J.; Kunieda, S.; Mannhart, W.; Marcinkevicius, B.; Nelson, R. O.; Neudecker, D.; Noguere, G.; Paris, M.; Simakov, S. P.; Schillebeeckx, P.; Smith, D. L.; Tao, X.; Trkov, A.; Wallner, A.; Wang, W.

2018-02-01

With the need for improving existing nuclear data evaluations, (e.g., ENDF/B-VIII.0 and JEFF-3.3 releases) the first step was to evaluate the standards for use in such a library. This new standards evaluation made use of improved experimental data and some developments in the methodology of analysis and evaluation. In addition to the work on the traditional standards, this work produced the extension of some energy ranges and includes new reactions that are called reference cross sections. Since the effort extends beyond the traditional standards, it is called the neutron data standards evaluation. This international effort has produced new evaluations of the following cross section standards: the H(n,n), 6Li(n,t), 10B(n,α), 10B(n,α1 γ), natC(n,n), Au(n,γ), 235U(n,f) and 238U(n,f). Also in the evaluation process the 238U(n,γ) and 239Pu(n,f) cross sections that are not standards were evaluated. Evaluations were also obtained for data that are not traditional standards: the Maxwellian spectrum averaged cross section for the Au(n,γ) cross section at 30 keV; reference cross sections for prompt γ-ray production in fast neutron-induced reactions; reference cross sections for very high energy fission cross sections; the 252Cf spontaneous fission neutron spectrum and the 235U prompt fission neutron spectrum induced by thermal incident neutrons; and the thermal neutron constants. The data and covariance matrices of the uncertainties were obtained directly from the evaluation procedure.

Effect of 25(OH) vitamin D reference method procedure (RMP) alignment on clinical measurements obtained with the IDS-iSYS chemiluminescent-based automated analyzer.

PubMed

Simpson, Christine A; Cusano, Anna Maria; Bihuniak, Jessica; Walker, Joanne; Insogna, Karl L

2015-04-01

The Vitamin D Standardization Program (VDSP) has identified ID-LC/MS/MS as the reference method procedure (RMP) for 25(OH) vitamin D and NIST Standard SRM2972 as the standard reference material (SRM). As manufacturers align their products to the RMP and NIST standard, a concern is that results obtained in aligned assays will be divergent from those obtained with pre-alignment assays. The Immunodiagnostic Systems Ltd., chemiluminescent, 25(OH) vitamin D iSYS platform assay, was recently harmonized to the RMP. To determine the impact of standardization on results obtained with iSYS reagents, 119 single donor serum samples from eight different disease categories were analyzed in four non-standardized and two standardized iSYS assays. There were strong correlations between the four non-standardized and two standardized assays with Spearman's rank r values between 0.975 and 0.961 and four of the eight r values were >0.97. R(2) values for the eight best-fit linear regression equations ranging between 0.947 and 0.916. None of the slopes were found to be significantly different from one another. Bland-Altman plots showed that the bias was comparable when each of the four non-standardized assays was compared to either of the standardized assays. When the data were segregated in values between 6 and 49ng/mL (15-122nmol/L) or between 50 and 100ng/mL (125-250nmol/L) significant associations remained between results obtained with non-standardized and standardized calibrators regardless of the absolute value. When five recent DEQAS unknowns were analyzed in one non-standardized and one standardized assay the mean percent difference from the NIST target in values obtained using standardized vs. non-standardized calibrators were not significantly different. Finally, strong and statistically significant associations between the results were obtained using non-standardized and standardized assays for six of eight clinical conditions. The only exceptions were hypocalcemia and breast

Spectral relative standard deviation: a practical benchmark in metabolomics.

PubMed

Parsons, Helen M; Ekman, Drew R; Collette, Timothy W; Viant, Mark R

2009-03-01

Metabolomics datasets, by definition, comprise of measurements of large numbers of metabolites. Both technical (analytical) and biological factors will induce variation within these measurements that is not consistent across all metabolites. Consequently, criteria are required to assess the reproducibility of metabolomics datasets that are derived from all the detected metabolites. Here we calculate spectrum-wide relative standard deviations (RSDs; also termed coefficient of variation, CV) for ten metabolomics datasets, spanning a variety of sample types from mammals, fish, invertebrates and a cell line, and display them succinctly as boxplots. We demonstrate multiple applications of spectral RSDs for characterising technical as well as inter-individual biological variation: for optimising metabolite extractions, comparing analytical techniques, investigating matrix effects, and comparing biofluids and tissue extracts from single and multiple species for optimising experimental design. Technical variation within metabolomics datasets, recorded using one- and two-dimensional NMR and mass spectrometry, ranges from 1.6 to 20.6% (reported as the median spectral RSD). Inter-individual biological variation is typically larger, ranging from as low as 7.2% for tissue extracts from laboratory-housed rats to 58.4% for fish plasma. In addition, for some of the datasets we confirm that the spectral RSD values are largely invariant across different spectral processing methods, such as baseline correction, normalisation and binning resolution. In conclusion, we propose spectral RSDs and their median values contained herein as practical benchmarks for metabolomics studies.

50 CFR 85.46 - Survey and plan standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 9 2014-10-01 2014-10-01 false Survey and plan standards. 85.46 Section... Conditions on Use/Acceptance of Funds § 85.46 Survey and plan standards. (a) Survey standards. (1) Surveys...) Surveys may be conducted Statewide, if necessary, to obtain information on boats using the coastal zone...

50 CFR 85.46 - Survey and plan standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 9 2013-10-01 2013-10-01 false Survey and plan standards. 85.46 Section... Conditions on Use/Acceptance of Funds § 85.46 Survey and plan standards. (a) Survey standards. (1) Surveys...) Surveys may be conducted Statewide, if necessary, to obtain information on boats using the coastal zone...

50 CFR 85.46 - Survey and plan standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 8 2011-10-01 2011-10-01 false Survey and plan standards. 85.46 Section... Conditions on Use/Acceptance of Funds § 85.46 Survey and plan standards. (a) Survey standards. (1) Surveys...) Surveys may be conducted Statewide, if necessary, to obtain information on boats using the coastal zone...

50 CFR 85.46 - Survey and plan standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Survey and plan standards. 85.46 Section... Conditions on Use/Acceptance of Funds § 85.46 Survey and plan standards. (a) Survey standards. (1) Surveys...) Surveys may be conducted Statewide, if necessary, to obtain information on boats using the coastal zone...

50 CFR 85.46 - Survey and plan standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 9 2012-10-01 2012-10-01 false Survey and plan standards. 85.46 Section... Conditions on Use/Acceptance of Funds § 85.46 Survey and plan standards. (a) Survey standards. (1) Surveys...) Surveys may be conducted Statewide, if necessary, to obtain information on boats using the coastal zone...

The statistical treatment implemented to obtain the planetary protection bioburdens for the Mars Science Laboratory mission

NASA Astrophysics Data System (ADS)

Beaudet, Robert A.

2013-06-01

NASA Planetary Protection Policy requires that Category IV missions such as those going to the surface of Mars include detailed assessment and documentation of the bioburden on the spacecraft at launch. In the prior missions to Mars, the approaches used to estimate the bioburden could easily be conservative without penalizing the project because spacecraft elements such as the descent and landing stages had relatively small surface areas and volumes. With the advent of a large spacecraft such as Mars Science Laboratory (MSL), it became necessary for a modified—still conservative but more pragmatic—statistical treatment be used to obtain the standard deviations and the bioburden densities at about the 99.9% confidence limits. This article describes both the Gaussian and Poisson statistics that were implemented to analyze the bioburden data from the MSL spacecraft prior to launch. The standard deviations were weighted by the areas sampled with each swab or wipe. Some typical cases are given and discussed.

Water vapor over Europe obtained from remote sensors and compared with a hydrostatic NWP model

NASA Astrophysics Data System (ADS)

Johnsen, K.-P.; Kidder, S. Q.

Due to its high-variability water vapor is a crucial parameter in short-term numerical weather prediction. Integrated water vapor (IWV) data obtained from a network of groundbased Global Positioning System (GPS) receivers mainly over Germany and passive microwave measurements of the Advanced Microwave Sounding Unit (AMSU-A) are compared with the high-resolution regional weather forecast model HRM of the Deutscher Wetterdienst (DWD). Time series of the IWV at 74 GPS stations obtained during the first complete year of the GFZ/GPS network between May 2000 and April 2001 are applied together with colocated forecasts of the HRM model. The low bias (0.08 kg/m 2) between the HRM model and the GPS data can mainly be explained by the bias between the ECMWF analysis data used to initilize the HRM model and the GPS data. The IWV standard deviation between the HRM model and the GPS data during that time is about 2.47 kg/ m2. GPS stations equipped with surface pressure sensors show about 0.29 kg/ m2 lower standard deviation compared with GPS stations with interpolated surface pressure from synoptic stations. The NOAA/NESDIS Total Precipitable Water algorithm is applied to obtain the IWV and to validate the model above the sea. While the mean IWV obtained from the HRM model is about 2.1 kg/ m2 larger than from the AMSU-A data, the standard deviations are 2.46 kg/ m2 (NOAA-15) and 2.29 kg/ m2 (NOAA-16) similar to the IWV standard deviation between HRM and GPS data.

RER SPECTRA OBTAINED WITH A MULTICRYSTAL SPECTROMETER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Austin, W.E.; Champion, W.R.

1959-11-01

Relative gamma spectra were obtained twenty feet from the Hadiation Effects Reactor. The measurements were made using a multicry-stal spectrometer. This design incorporates pair and anticompton spectrometers in combination. Two reactor configurations were used; with shield tanks empty- and water filled. The spectra were obtained before the fuel elements were run at high power. Consequently very little of the fission product spectrum is tntermined. (J.R.D.)

A convolution model for obtaining the response of an ionization chamber in static non standard fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gonzalez-Castano, D. M.; Gonzalez, L. Brualla; Gago-Arias, M. A.

2012-01-15

Purpose: This work contains an alternative methodology for obtaining correction factors for ionization chamber (IC) dosimetry of small fields and composite fields such as IMRT. The method is based on the convolution/superposition (C/S) of an IC response function (RF) with the dose distribution in a certain plane which includes chamber position. This method is an alternative to the full Monte Carlo (MC) approach that has been used previously by many authors for the same objective. Methods: The readout of an IC at a point inside a phantom irradiated by a certain beam can be obtained as the convolution of themore » dose spatial distribution caused by the beam and the IC two-dimensional RF. The proposed methodology has been applied successfully to predict the response of a PTW 30013 IC when measuring different nonreference fields, namely: output factors of 6 MV small fields, beam profiles of cobalt 60 narrow fields and 6 MV radiosurgery segments. The two-dimensional RF of a PTW 30013 IC was obtained by MC simulation of the absorbed dose to cavity air when the IC was scanned by a 0.6 x 0.6 mm{sup 2} cross section parallel pencil beam at low depth in a water phantom. For each of the cases studied, the results of the IC direct measurement were compared with the corresponding obtained by the C/S method. Results: For all of the cases studied, the agreement between the IC direct measurement and the IC calculated response was excellent (better than 1.5%). Conclusions: This method could be implemented in TPS in order to calculate dosimetry correction factors when an experimental IMRT treatment verification with in-phantom ionization chamber is performed. The miss-response of the IC due to the nonreference conditions could be quickly corrected by this method rather than employing MC derived correction factors. This method can be considered as an alternative to the plan-class associated correction factors proposed recently as part of an IAEA work group on nonstandard field

Professional Technical Standards in Colleges and Schools of Pharmacy

PubMed Central

Berry, Tricia M.; Chichester, Clinton O.; Sanoski, Cynthia A.; Woodward, Donald A.; Worley, Marcia M.; Early, Johnnie L.

2011-01-01

Objective To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). Methods The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Results Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. Conclusion More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study. PMID:21655404

Gravitational Field as a Pressure Force from Logarithmic Lagrangians and Non-Standard Hamiltonians: The Case of Stellar Halo of Milky Way

NASA Astrophysics Data System (ADS)

El-Nabulsi, Rami Ahmad

2018-03-01

Recently, the notion of non-standard Lagrangians was discussed widely in literature in an attempt to explore the inverse variational problem of nonlinear differential equations. Different forms of non-standard Lagrangians were introduced in literature and have revealed nice mathematical and physical properties. One interesting form related to the inverse variational problem is the logarithmic Lagrangian, which has a number of motivating features related to the Liénard-type and Emden nonlinear differential equations. Such types of Lagrangians lead to nonlinear dynamics based on non-standard Hamiltonians. In this communication, we show that some new dynamical properties are obtained in stellar dynamics if standard Lagrangians are replaced by Logarithmic Lagrangians and their corresponding non-standard Hamiltonians. One interesting consequence concerns the emergence of an extra pressure term, which is related to the gravitational field suggesting that gravitation may act as a pressure in a strong gravitational field. The case of the stellar halo of the Milky Way is considered.

Implementing Home Health Standards in Clinical Practice.

PubMed

Gorski, Lisa A

2016-02-01

In 1986, the American Nurses Association (ANA) published the first Standards of Home Health Practice. Revised in 1992 and expanded in 1999 to become Home Health Nursing: Scope and Standards of Practice, it was revised in 2008 and again in 2014. In the 2014 edition, there are 6 standards of home healthcare nursing practice and 10 standards of professional performance for home healthcare nursing. The focus of this article is to describe the home healthcare standards and to provide guidance for implementation in clinical practice. It is strongly encouraged that home healthcare administrators, educators, and staff obtain a copy of the standards and fully read this essential home healthcare resource.

Evaluation of online carbon isotope dilution mass spectrometry for the purity assessment of synthetic peptide standards.

PubMed

Cueto Díaz, Sergio; Ruiz Encinar, Jorge; García Alonso, J Ignacio

2014-09-24

We present a novel method for the purity assessment of peptide standards which is applicable to any water soluble peptide. The method is based on the online (13)C isotope dilution approach in which the peptide is separated from its related impurities by liquid chromatography (LC) and the eluent is mixed post-column with a continuous flow of (13)C-enriched sodium bicarbonate. An online oxidation step using sodium persulfate in acidic media at 99°C provides quantitative oxidation to (12)CO2 and (13)CO2 respectively which is extracted to a gaseous phase with the help of a gas permeable membrane. The measurement of the isotope ratio 44/45 in the mass spectrometer allows the construction of the mass flow chromatogram. As the only species that is finally measured in the mass spectrometer is CO2, the peptide content in the standard can be quantified, on the base of its carbon content, using a generic primary standard such as potassium hydrogen phthalate. The approach was validated by the analysis of a reference material (NIST 8327), and applied to the quantification of two commercial synthetic peptide standards. In that case, the results obtained were compared with those obtained using alternative methods, such as amino acid analysis and ICP-MS. The results obtained proved the value of the method for the fast, accurate and precise mass purity assignment of synthetic peptide standards. Copyright © 2014 Elsevier B.V. All rights reserved.

Factors related to the number of fast food meals obtained by college meal plan students.

PubMed

Dingman, Deirdre A; Schulz, Mark R; Wyrick, David L; Bibeau, Daniel L; Gupta, Sat N

2014-01-01

This study tested whether days on campus, financial access through a meal plan, and health consciousness were associated with number of meals that college students obtained from fast food restaurants. In April 2013, all students currently enrolled in a meal plan were invited to participate in an online survey (N = 1,246). Students were asked to report the total number of meals eaten in the past week and where they obtained them. Negative binomial regression was used, and it was found that the number of meals obtained from fast food restaurants was positively associated with financial access and negatively associated with health consciousness. An association between days on campus and the number of meals obtained from fast food restaurants was not found. Increasing levels of health consciousness and reducing access to fast food restaurants through flex plans may reduce college students' consumption of fast food.

Cookbook Recipe to Simulate Seawater Intrusion with Standard MODFLOW

NASA Astrophysics Data System (ADS)

Schaars, F.; Bakker, M.

2012-12-01

We developed a cookbook recipe to simulate steady interface flow in multi-layer coastal aquifers with regular groundwater codes such as standard MODFLOW. The main step in the recipe is a simple transformation of the hydraulic conductivities and thicknesses of the aquifers. Standard groundwater codes may be applied to compute the head distribution in the aquifer using the transformed parameters. For example, for flow in a single unconfined aquifer, the hydraulic conductivity needs to be multiplied with 41 and the base of the aquifer needs to be set to mean sea level (for a relative seawater density of 1.025). Once the head distribution is obtained, the Ghijben-Herzberg relationship is applied to compute the depth of the interface. The recipe may be applied to quite general settings, including spatially variable aquifer properties. Any standard groundwater code may be used, as long as it can simulate unconfined flow where the transmissivity is a linear function of the head. The proposed recipe is benchmarked successfully against a number of analytic and numerical solutions.

Why Standards Matter

ERIC Educational Resources Information Center

Anthony, Michael A.; Caleb, Derry; Mitchell, Stanley G.

2012-01-01

When standards are absent, people soon notice. They care when products turn out to be of poor quality, are unreliable, or dangerous because of counterfeiting. By positioning their products in relation to a common standard, firms grow the total size of the market, and can focus their innovation efforts in areas where they have a comparative…

Selection of reference standard during method development using the analytical hierarchy process.

PubMed

Sun, Wan-yang; Tong, Ling; Li, Dong-xiang; Huang, Jing-yi; Zhou, Shui-ping; Sun, Henry; Bi, Kai-shun

2015-03-25

Reference standard is critical for ensuring reliable and accurate method performance. One important issue is how to select the ideal one from the alternatives. Unlike the optimization of parameters, the criteria of the reference standard are always immeasurable. The aim of this paper is to recommend a quantitative approach for the selection of reference standard during method development based on the analytical hierarchy process (AHP) as a decision-making tool. Six alternative single reference standards were assessed in quantitative analysis of six phenolic acids from Salvia Miltiorrhiza and its preparations by using ultra-performance liquid chromatography. The AHP model simultaneously considered six criteria related to reference standard characteristics and method performance, containing feasibility to obtain, abundance in samples, chemical stability, accuracy, precision and robustness. The priority of each alternative was calculated using standard AHP analysis method. The results showed that protocatechuic aldehyde is the ideal reference standard, and rosmarinic acid is about 79.8% ability as the second choice. The determination results successfully verified the evaluation ability of this model. The AHP allowed us comprehensive considering the benefits and risks of the alternatives. It was an effective and practical tool for optimization of reference standards during method development. Copyright © 2015 Elsevier B.V. All rights reserved.

Evaluation of the Neutron Data Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, A. D.; Pronyaev, V. G.; Capote, R.

With the need for improving existing nuclear data evaluations, (e.g., ENDF/B-VIII.0 and JEFF-3.3 releases) the first step was to evaluate the standards for use in such a library. This new standards evaluation made use of improved experimental data and some developments in the methodology of analysis and evaluation. In addition to the work on the traditional standards, this work produced the extension of some energy ranges and includes new reactions that are called reference cross sections. Since the effort extends beyond the traditional standards, it is called the neutron data standards evaluation. This international effort has produced new evaluations ofmore » the following cross section standards: the H(n,n), 6Li(n,t), 10B(n,α), 10B(n,α 1γ), natC(n,n), Au(n,γ), 235U(n,f) and 238U(n,f). Also in the evaluation process the 238U(n,γ) and 239Pu(n,f) cross sections that are not standards were evaluated. Evaluations were also obtained for data that are not traditional standards: the Maxwellian spectrum averaged cross section for the Au(n,γ) cross section at 30 keV; reference cross sections for prompt γ-ray production in fast neutron-induced reactions; reference cross sections for very high energy fission cross sections; the 252Cf spontaneous fission neutron spectrum and the 235U prompt fission neutron spectrum induced by thermal incident neutrons; and the thermal neutron constants. The data and covariance matrices of the uncertainties were obtained directly from the evaluation procedure.« less

Evaluation of the Neutron Data Standards

DOE PAGES

Carlson, A. D.; Pronyaev, V. G.; Capote, R.; ...

2018-02-01

With the need for improving existing nuclear data evaluations, (e.g., ENDF/B-VIII.0 and JEFF-3.3 releases) the first step was to evaluate the standards for use in such a library. This new standards evaluation made use of improved experimental data and some developments in the methodology of analysis and evaluation. In addition to the work on the traditional standards, this work produced the extension of some energy ranges and includes new reactions that are called reference cross sections. Since the effort extends beyond the traditional standards, it is called the neutron data standards evaluation. This international effort has produced new evaluations ofmore » the following cross section standards: the H(n,n), 6Li(n,t), 10B(n,α), 10B(n,α 1γ), natC(n,n), Au(n,γ), 235U(n,f) and 238U(n,f). Also in the evaluation process the 238U(n,γ) and 239Pu(n,f) cross sections that are not standards were evaluated. Evaluations were also obtained for data that are not traditional standards: the Maxwellian spectrum averaged cross section for the Au(n,γ) cross section at 30 keV; reference cross sections for prompt γ-ray production in fast neutron-induced reactions; reference cross sections for very high energy fission cross sections; the 252Cf spontaneous fission neutron spectrum and the 235U prompt fission neutron spectrum induced by thermal incident neutrons; and the thermal neutron constants. The data and covariance matrices of the uncertainties were obtained directly from the evaluation procedure.« less

38 CFR 0.735-2 - Government-wide standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Government-wide standards... STANDARDS OF ETHICAL CONDUCT AND RELATED RESPONSIBILITIES General Provisions § 0.735-2 Government-wide standards. For government-wide standards of ethical conduct and related responsibilities for Federal...

Relative or Absolute Standards for Child Poverty: A State-Level Analysis of Infant and Child Mortality

PubMed Central

Hillemeier, Marianne M.; Lynch, John; Harper, Sam; Raghunathan, Trivellore; Kaplan, George A.

2003-01-01

Objectives. The purpose of the present study was to compare the associations of state-referenced and federal poverty measures with states’ infant and child mortality rates. Methods. Compressed mortality and Current Population Survey data were used to examine relationships between mortality and (1) state-referenced poverty (percentage of children below half the state median income) and (2) percentage of children below the federal poverty line. Results. State-referenced poverty was not associated with mortality among infants or children, whereas poverty as defined by national standards was strongly related to mortality. Conclusions. Infant and child mortality is more closely tied to families’ capacity for meeting basic needs than to relative position within a state’s economic hierarchy. PMID:12660213

Acid Rain Analysis by Standard Addition Titration.

ERIC Educational Resources Information Center

Ophardt, Charles E.

1985-01-01

The standard addition titration is a precise and rapid method for the determination of the acidity in rain or snow samples. The method requires use of a standard buret, a pH meter, and Gran's plot to determine the equivalence point. Experimental procedures used and typical results obtained are presented. (JN)

A Panel Data Analysis of the Relationships of Nursing Home Staffing Levels and Standards to Regulatory Deficiencies

PubMed Central

Kovner, Christine; Harrington, Charlene; Greene, William; Mezey, Mathy

2009-01-01

Objective To examine the relationships between nursing staffing levels and nursing home deficiencies. Methods This panel data analysis employed random-effect models that adjusted for unobserved, nursing home–specific heterogeneity over time. Data were obtained from California's long-term care annual cost report data and the Automated Certification and Licensing Administrative Information and Management Systems data from 1999 to 2003, linked with other secondary data sources. Results Both total nursing staffing and registered nurse (RN) staffing levels were negatively related to total deficiencies, quality of care deficiencies, and serious deficiencies that may cause harm or jeopardy to nursing home residents. Nursing homes that met the state staffing standard received fewer total deficiencies and quality of care deficiencies than nursing homes that failed to meet the standard. Meeting the state staffing standard was not related to receiving serious deficiencies. Conclusions Total nursing staffing and RN staffing levels were predictors of nursing home quality. Further research is needed on the effectiveness of state minimum staffing standards. PMID:19181692

Strengthening Learners' Perspectives in Professional Standards to Restore Relationality as Central to Teaching

ERIC Educational Resources Information Center

Kriewaldt, Jeana A.

2015-01-01

Australian teacher standards have effects on what is thought about teachers' work. Just as teacher standards give expression to some characteristics of quality teaching, so too do students' views if solicited and made public, yet the archive of teaching standards pays little attention to learners' perspectives. This paper uses a theoretical…

Relation between the national handbook of recommended methods for water data acquisition and ASTM standards

USGS Publications Warehouse

Glysson, G. Douglas; Skinner, John V.

1991-01-01

In the late 1950's, intense demands for water and growing concerns about declines in the quality of water generated the need for more water-resources data. About thirty Federal agencies, hundreds of State, county and local agencies, and many private organizations had been collecting water data. However, because of differences in procedures and equipment, many of the data bases were incompatible. In 1964, as a step toward establishing more uniformity, the Bureau of the Budget (now the Office of Management and Budget, OMB) issued 'Circular A-67' which presented guidelines for collecting water data and also served as a catalyst for creating the Office of Water Data Coordination (OWDC) within the U.S. Geological Survey. This paper discusses past, present, and future aspects of the relation between methods in the National Handbook and standards published by ASTM (American Society for Testing and Materials) Committee D-19 on Water's Subcommittee D-19.07 on Sediment, Geomorphology, and Open Channel Flow. The discussion also covers historical aspects of standards - development work jointly conducted by OWDC and ASTM.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

An international marine-atmospheric {sup 222}Rn measurement intercomparison in Bermuda. Part 1: NIST calibration and methodology for standardized sample additions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colle, R.; Unterweger, M.P.; Hodge, P.A.

1996-01-01

As part of an international {sup 222}Rn measurement intercomparison conducted at Bermuda in October 1991, NIST provided standardized sample additions of known, but undisclosed (blind) {sup 222}Rn concentrations that could be related to US national standards. The standardized sample additions were obtained with a calibrated {sup 226}Ra source and a specially-designed manifold used to obtain well-known dilution factors from simultaneous flow-rate measurements. The additions were introduced over sampling periods of several hours (typically 4 h) into a common streamline on a sampling tower used by the participating laboratories for their measurements. The standardized {sup 222}Rn activity concentrations for the intercomparisonmore » ranged from approximately 2.5 Bq {center_dot} m{sup {minus}3} to 35 Bq {center_dot} m{sup {minus}3} (of which the lower end of this range approached concentration levels for ambient Bermudian air) and had overall uncertainties, approximating a 3 standard deviation uncertainty interval, of about 6% to 13%. This paper describes the calibration and methodology for the standardized sample additions.« less

Dishwashing water recycling system and related water quality standards for military use.

PubMed

Church, Jared; Verbyla, Matthew E; Lee, Woo Hyoung; Randall, Andrew A; Amundsen, Ted J; Zastrow, Dustin J

2015-10-01

As the demand for reliable and safe water supplies increases, both water quality and available quantity are being challenged by population growth and climate change. Greywater reuse is becoming a common practice worldwide; however, in remote locations of limited water supply, such as those encountered in military installations, it is desirable to expand its classification to include dishwashing water to maximize the conservation of fresh water. Given that no standards for dishwashing greywater reuse by the military are currently available, the current study determined a specific set of water quality standards for dishwater recycling systems for U.S. military field operations. A tentative water reuse standard for dishwashing water was developed based on federal and state regulations and guidelines for non-potable water, and the developed standard was cross-evaluated by monitoring water quality data from a full-scale dishwashing water recycling system using an innovative electrocoagulation and ultrafiltration process. Quantitative microbial risk assessment (QMRA) was also performed based on exposure scenarios derived from literature data. As a result, a specific set of dishwashing water reuse standards for field analysis (simple, but accurate) was finalized as follows: turbidity (<1 NTU), Escherichia coli (<50 cfu mL(-1)), and pH (6-9). UV254 was recommended as a surrogate for organic contaminants (e.g., BOD5), but requires further calibration steps for validation. The developed specific water standard is the first for dishwashing water reuse and will be expected to ensure that water quality is safe for field operations, but not so stringent that design complexity, cost, and operational and maintenance requirements will not be feasible for field use. In addition the parameters can be monitored using simple equipment in a field setting with only modest training requirements and real-time or rapid sample turn-around. This standard may prove useful in future development

Study of the mode of angular velocity damping for a spacecraft at non-standard situation

NASA Astrophysics Data System (ADS)

Davydov, A. A.; Sazonov, V. V.

2012-07-01

Non-standard situation on a spacecraft (Earth's satellite) is considered, when there are no measurements of the spacecraft's angular velocity component relative to one of its body axes. Angular velocity measurements are used in controlling spacecraft's attitude motion by means of flywheels. The arising problem is to study the operation of standard control algorithms in the absence of some necessary measurements. In this work this problem is solved for the algorithm ensuring the damping of spacecraft's angular velocity. Such a damping is shown to be possible not for all initial conditions of motion. In the general case one of two possible final modes is realized, each described by stable steady-state solutions of the equations of motion. In one of them, the spacecraft's angular velocity component relative to the axis, for which the measurements are absent, is nonzero. The estimates of the regions of attraction are obtained for these steady-state solutions by numerical calculations. A simple technique is suggested that allows one to eliminate the initial conditions of the angular velocity damping mode from the attraction region of an undesirable solution. Several realizations of this mode that have taken place are reconstructed. This reconstruction was carried out using approximations of telemetry values of the angular velocity components and the total angular momentum of flywheels, obtained at the non-standard situation, by solutions of the equations of spacecraft's rotational motion.

Extended spin symmetry and the standard model

NASA Astrophysics Data System (ADS)

Besprosvany, J.; Romero, R.

2010-12-01

We review unification ideas and explain the spin-extended model in this context. Its consideration is also motivated by the standard-model puzzles. With the aim of constructing a common description of discrete degrees of freedom, as spin and gauge quantum numbers, the model departs from q-bits and generalized Hilbert spaces. Physical requirements reduce the space to one that is represented by matrices. The classification of the representations is performed through Clifford algebras, with its generators associated with Lorentz and scalar symmetries. We study a reduced space with up to two spinor elements within a matrix direct product. At given dimension, the demand that Lorentz symmetry be maintained, determines the scalar symmetries, which connect to vector-and-chiral gauge-interacting fields; we review the standard-model information in each dimension. We obtain fermions and bosons, with matter fields in the fundamental representation, radiation fields in the adjoint, and scalar particles with the Higgs quantum numbers. We relate the fields' representation in such spaces to the quantum-field-theory one, and the Lagrangian. The model provides a coupling-constant definition.

Prospects for atomic frequency standards

NASA Technical Reports Server (NTRS)

Audoin, C.

1984-01-01

The potentialities of different atomic frequency standards which are not yet into field operation, for most of them, but for which preliminary data, obtained in laboratory experiments, give confidence that they may improve greatly the present state of the art are described. The review will mainly cover the following devices: (1) cesium beam frequency standards with optical pumping and detection; (2) optically pumped rubidium cells; (3) magnesium beam; (4) cold hydrogen masers; and (5) traps with stored and cooled ions.

76 FR 22665 - Release of Final Document Related to the Review of the National Ambient Air Quality Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... ``cause or contribute to air pollution which may reasonably be anticipated to endanger public health or... Document Related to the Review of the National Ambient Air Quality Standards for Particulate Matter AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of availability. SUMMARY: The Office of Air Quality...

[An attempt for standardization of serum CA19-9 levels, in order to dissolve the gap between three different methods].

PubMed

Hayashi, Kuniki; Hoshino, Tadashi; Yanai, Mitsuru; Tsuchiya, Tatsuyuki; Kumasaka, Kazunari; Kawano, Kinya

2004-06-01

It is well known that serious method-related differences exist in results of serum CA19-9, and the necessity of standardization has been pointed out. In this study, differences of serum tumor marker CA19-9 levels obtained by various immunoassay kits (CLEIA, FEIA, LPIA and RIA) were evaluated in sixty-seven clinical samples and five calibrators and the possibility to improve the inter-methodological differences were observed not only for clinical samples but also for calibrators. We supposed an assumed standard material using by a calibrator. We calculated the serum levels of CA19-9 when using the assumed standard material for three different measurement methods. We approximate the CA19-9 values using by this method. It is suggested that the obtained CA19-9 values could be approximated by recalculation with the assumed standard material would be able to correct between-method and between-laboratory discrepancies in particular systematic errors.

Method for matching customer and manufacturer positions for metal product parameters standardization

NASA Astrophysics Data System (ADS)

Polyakova, Marina; Rubin, Gennadij; Danilova, Yulija

2018-04-01

Decision making is the main stage of regulation the relations between customer and manufacturer during the design the demands of norms in standards. It is necessary to match the positions of the negotiating sides in order to gain the consensus. In order to take into consideration the differences of customer and manufacturer estimation of the object under standardization process it is obvious to use special methods of analysis. It is proposed to establish relationships between product properties and its functions using functional-target analysis. The special feature of this type of functional analysis is the consideration of the research object functions and properties. It is shown on the example of hexagonal head crew the possibility to establish links between its functions and properties. Such approach allows obtaining a quantitative assessment of the closeness the positions of customer and manufacturer at decision making during the standard norms establishment.

Standards Supporters Firing Back

ERIC Educational Resources Information Center

Ujifusa, Andrew

2013-01-01

Supporters of the Common Core State Standards are moving to confront increasingly high-profile opposition to the standards at the state and national levels by rallying the private sector and initiating coordinated public relations and advertising campaigns as schools continue implementation. In states such as Michigan and Tennessee, where…

The Second International Standard for Penicillin*

PubMed Central

Humphrey, J. H.; Mussett, M. V.; Perry, W. L. M.

1953-01-01

In 1950 the Department of Biological Standards, National Institute for Medical Research, London, was authorized by the WHO Expert Committee on Biological Standardization to prepare the Second International Standard for Penicillin. A single batch of specially recrystallized sodium penicillin G was obtained and 11 laboratories in seven different countries were requested to take part in its collaborative assay. 112 assays were carried out, of which 101 were done by cup-plate methods using either Staphylococcus aureus or Bacillus subtilis. The results were subjected to standard methods of analysis, on the basis of which the authors define the Second International Standard for Penicillin as containing 1,670 International Units (IU) per mg, with limits of error (P = 0.05) of 1,666-1,674 IU/mg. The International Unit is therefore redefined as the activity contained in 0.0005988 mg of the Second International Standard for Penicillin. PMID:13082387

Complying with the Health Insurance Portability and Accountability Act. Privacy standards.

PubMed

Shuren, A W; Livsey, K

2001-11-01

The Privacy Rule: Limits the use and disclosure of PHI to purposes of treatment, payment, or routine health care operations. Requires covered entities to provide advance notice to the public of its policy governing disclosure of PHI. Requires entities covered by the Standard to secure general client consent to use and to disclose PHI for treatment, payment, or routine health care operations and to obtain specific client authorization to use or to disclose PHI for all other purposes unless the disclosure is specifically permitted without consent or authorization (e.g., a covered entity may disclose PHI to a health care oversight agency such as the Office of the Inspector General without first obtaining client authorization). In certain situations, a covered entity need only obtain client agreement to disclose PHI which may be oral or inferred from the circumstances surrounding the disclosure. For example, a covered entity could disclose PHI to a relative caring for the individual who is the subject of the health information. Expects covered entities to take measures to protect PHI from both inadvertent and deliberate misuse and disclosure. Requires, except in certain circumstances, the amount of PHI disclosed on any occasion to be limited to the minimum necessary to achieve the purpose of the disclosure. Gives individuals more control of their health information by permitting them to review and amend health information pertaining to themselves and to demand an accounting of persons to whom their health information has been disclosed. Establishes terms under which a covered entity may disclose PHI to a business associate. Permits states to maintain state laws that are more stringent than the Privacy Rule. The statute provides for significant civil and criminal penalties for failure to comply with the Standards. Violations are punishable by fines as much as $250,000 and 10 years imprisonment. The HHS, Office of Civil Rights is charged with enforcing the Standards. The

Low power vs standard power transpupillary thermotherapy in patients with age-related macular degeneration and subfoveal choroidal neovascularization ineligible for photodynamic therapy.

PubMed

Hogan, A C; Kilmartin, D J

2006-06-01

To assess the effect of standard power vs low power transpupillary thermotherapy (TTT) in patients with active subfoveal choroidal neovascularization secondary to age-related macular degeneration ineligible for photodynamic therapy (PDT) by original treatment of age-related macular degeneration with photodynamic therapy (TAP) study group recommendations. Retrospective review of 79 patients with active predominantly occult subfoveal choroidal neovascularization or predominantly classic subfoveal choroidal neovascularization but Snellen visual acuity <20/200. All patients were treated with TTT administered via a Mainster wide field fundus contact lens with a retinal power/diameter coefficient of 248 mW/mm in the standard power (n=27) and 181 mW/mm in the low power group (n=52). The primary outcome was stabilization (<1 Snellen line change) or improvement (two or more Snellen lines) in visual acuity. Clinical and fluorescein angiographic resolution of overlying exudation was documented. At 24 month follow-up, 17 patients (63%) in the standard power and 36 patients (69%) in the low power group achieved stable or improved vision. Improved vision (mean three lines) was observed in 22% of the standard power and 23% of the low power group. Overlying exudation was reduced clinically with minimal or no leakage on fluorescein angiogram in 85% of standard power and 90% of low power group. Subgroup analysis in the low power group demonstrated a visual benefit in patients with subfoveal lesions, which had any classic component. Low power TTT is as effective as standard power in stabilizing or improving vision and reducing overlying exudation in patients with active subfoveal choroidal neovascularization ineligible for PDT.

Implementation of standardization in clinical practice: not always an easy task.

PubMed

Panteghini, Mauro

2012-02-29

As soon as a new reference measurement system is adopted, clinical validation of correctly calibrated commercial methods should take place. Tracing back the calibration of routine assays to a reference system can actually modify the relation of analyte results to existing reference intervals and decision limits and this may invalidate some of the clinical decision-making criteria currently used. To maintain the accumulated clinical experience, the quantitative relationship to the previous calibration system should be established and, if necessary, the clinical decision-making criteria should be adjusted accordingly. The implementation of standardization should take place in a concerted action of laboratorians, manufacturers, external quality assessment scheme organizers and clinicians. Dedicated meetings with manufacturers should be organized to discuss the process of assay recalibration and studies should be performed to obtain convincing evidence that the standardization works, improving result comparability. Another important issue relates to the surveillance of the performance of standardized assays through the organization of appropriate analytical internal and external quality controls. Last but not least, uncertainty of measurement that fits for this purpose must be defined across the entire traceability chain, starting with the available reference materials, extending through the manufacturers and their processes for assignment of calibrator values and ultimately to the final result reported to clinicians by laboratories.

45 CFR 156.200 - QHP issuer participation standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 156.200 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Qualified Health Plan Minimum Certification Standards § 156.200 QHP issuer...

45 CFR 156.200 - QHP issuer participation standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Section 156.200 Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Qualified Health Plan Minimum Certification Standards § 156.200 QHP issuer...

45 CFR 156.200 - QHP issuer participation standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Section 156.200 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Qualified Health Plan Minimum Certification Standards § 156.200 QHP issuer...

45 CFR 155.730 - Application standards for SHOP.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 155.730 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS EXCHANGE ESTABLISHMENT STANDARDS AND OTHER RELATED STANDARDS UNDER THE AFFORDABLE CARE ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.730 Application standards for SHOP...

45 CFR 155.710 - Eligibility standards for SHOP.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 155.710 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS EXCHANGE ESTABLISHMENT STANDARDS AND OTHER RELATED STANDARDS UNDER THE AFFORDABLE CARE ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.710 Eligibility standards for SHOP...

45 CFR 155.710 - Eligibility standards for SHOP.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 155.710 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS EXCHANGE ESTABLISHMENT STANDARDS AND OTHER RELATED STANDARDS UNDER THE AFFORDABLE CARE ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.710 Eligibility standards for SHOP...

45 CFR 155.1000 - Certification standards for QHPs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 155.1000 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS EXCHANGE ESTABLISHMENT STANDARDS AND OTHER RELATED STANDARDS UNDER THE AFFORDABLE CARE ACT Exchange Functions: Certification of Qualified Health Plans § 155.1000 Certification standards for QHPs. (a...

Status of emerging standards for removable computer storage media and related contributions of NIST

NASA Technical Reports Server (NTRS)

Podio, Fernando L.

1992-01-01

Standards for removable computer storage media are needed so that users may reliably interchange data both within and among various computer installations. Furthermore, media interchange standards support competition in industry and prevent sole-source lock-in. NIST participates in magnetic tape and optical disk standards development through Technical Committees X3B5, Digital Magnetic Tapes, X3B11, Optical Digital Data Disk, and the Joint Technical Commission on Data Permanence. NIST also participates in other relevant national and international standards committees for removable computer storage media. Industry standards for digital magnetic tapes require the use of Standard Reference Materials (SRM's) developed and maintained by NIST. In addition, NIST has been studying care and handling procedures required for digital magnetic tapes. NIST has developed a methodology for determining the life expectancy of optical disks. NIST is developing care and handling procedures for optical digital data disks and is involved in a program to investigate error reporting capabilities of optical disk drives. This presentation reflects the status of emerging magnetic tape and optical disk standards, as well as NIST's contributions in support of these standards.

45 CFR 156.285 - Additional standards specific to SHOP.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Section 156.285 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Qualified Health Plan Minimum Certification Standards § 156.285 Additional standards...

45 CFR 156.285 - Additional standards specific to SHOP.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 156.285 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Qualified Health Plan Minimum Certification Standards § 156.285 Additional standards...

45 CFR 156.285 - Additional standards specific to SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Section 156.285 Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Qualified Health Plan Minimum Certification Standards § 156.285 Additional standards...

Work Environment-Related Factors in Obtaining and Maintaining Work in a Competitive Employment Setting for Employees with Intellectual Disabilities: A Systematic Review.

PubMed

Ellenkamp, Joke J H; Brouwers, Evelien P M; Embregts, Petri J C M; Joosen, Margot C W; van Weeghel, Jaap

2016-03-01

People with an intellectual disability value work as a significant part of their lives, and many of them want to participate in regular paid employment.Current estimates show that the number of people with ID who have some form of paid employment are very low, ranging from 9 to 40% across different countries,despite legislations. This review examines papers published in the past 20 years in an attempt to answer the following research question: ‘What work environment-related factors contribute to obtaining or maintaining work in competitive employment for people with an intellectual disability?’ The databases of PubMed, PsycINFO,CINAHL, Embase and Web of Science were searched for relevant papers published between 1993 and 2013. All papers were independently screened by two researchers.Methodological quality of the studies was evaluated, and data on work environment-related factors stimulating employment for people with intellectual disabilities were extracted and grouped into categories. A total of 1932 articles were retrieved. After extensive screening for relevance and quality, 26 articles were included in this review. Four themes/categories with work environment related factors that could influence work participation were distinguished. Five studies were conducted on employers’ decisions and opinions. Eight focused on job content and performance, and eight on workplace interaction and culture. Five studies evaluated support by job coaches. Despite ongoing legislation to promote participation of people with intellectual disabilities in the paid workforce, research in this area is still extremely scarce. In the past 20 years, very few studies have focused on work environment-related factors that can enhance competitive work for people with intellectual disabilities.This review shows that relevant work environment-related factors for obtaining and maintaining work in competitive employment include supporting the employers by paying specific attention to

Technology and Technique Standards for Camera-Acquired Digital Dermatologic Images: A Systematic Review.

PubMed

Quigley, Elizabeth A; Tokay, Barbara A; Jewell, Sarah T; Marchetti, Michael A; Halpern, Allan C

2015-08-01

Photographs are invaluable dermatologic diagnostic, management, research, teaching, and documentation tools. Digital Imaging and Communications in Medicine (DICOM) standards exist for many types of digital medical images, but there are no DICOM standards for camera-acquired dermatologic images to date. To identify and describe existing or proposed technology and technique standards for camera-acquired dermatologic images in the scientific literature. Systematic searches of the PubMed, EMBASE, and Cochrane databases were performed in January 2013 using photography and digital imaging, standardization, and medical specialty and medical illustration search terms and augmented by a gray literature search of 14 websites using Google. Two reviewers independently screened titles of 7371 unique publications, followed by 3 sequential full-text reviews, leading to the selection of 49 publications with the most recent (1985-2013) or detailed description of technology or technique standards related to the acquisition or use of images of skin disease (or related conditions). No universally accepted existing technology or technique standards for camera-based digital images in dermatology were identified. Recommendations are summarized for technology imaging standards, including spatial resolution, color resolution, reproduction (magnification) ratios, postacquisition image processing, color calibration, compression, output, archiving and storage, and security during storage and transmission. Recommendations are also summarized for technique imaging standards, including environmental conditions (lighting, background, and camera position), patient pose and standard view sets, and patient consent, privacy, and confidentiality. Proposed standards for specific-use cases in total body photography, teledermatology, and dermoscopy are described. The literature is replete with descriptions of obtaining photographs of skin disease, but universal imaging standards have not been developed

Evidence Related to Awareness, Adoption, and Implementation of the Standards for Technological Literacy: Content for the Study of Technology

ERIC Educational Resources Information Center

Russell, Jill F.

2005-01-01

Over the past twenty years American education has seen many changes, and most notable have been those related to accountability and assessment. One aspect of these changes has been the movement toward more specified student learning outcomes. In discipline after discipline content standards have been developed outlining that which students should…

Standard UBV Observations at the Çanakkale University Observatory (ÇUO)

NASA Astrophysics Data System (ADS)

Bakis, Hicran; Bakis, Volkan; Demircan, Osman; Budding, Edwin

2005-07-01

By using standard and comparison star observations carried out at different times of the year, at Çanakkale Onsekiz Mart University Observatory, we obtained the atmospheric extinction coefficients at the observatory. We also obtained transformation coefficients and zero-point constants for the transformation to the standard Johnson UBV system, of observations in the local system carried out with the SSP5A photometer and T40 telescope. The transmission curves and the mean wavelengths of the UBV filters as measured in the laboratory appear not much different from those of the standard Johnson system and found inside the transmission curve of the standard mean atmosphere.

Repeatability and reproducibility of measurements of the suburethral tape location obtained in pelvic floor ultrasound performed with a transvaginal probe

PubMed Central

Dresler, Maria Magdalena; Kociszewski, Jacek; Pędraszewski, Piotr; Trzeciak, Agnieszka; Surkont, Grzegorz

2017-01-01

Introduction Implants used to treat patients with urogynecological conditions are well visible in US examination. The position of the suburethral tape (sling) is determined in relation to the urethra or the pubic symphysis. Aim of the study The study was aimed at assessing the accuracy of measurements determining suburethral tape location obtained in pelvic US examination performed with a transvaginal probe. Material and methods The analysis covered the results of sonographic measurements obtained according to a standardized technique in women referred for urogynecological diagnostics. Data from a total of 68 patients were used to analyse the repeatability and reproducibility of results obtained on the same day. Results The intraclass correlation coefficient for the repeatability and reproducibility of the sonographic measurements of suburethral tape location obtained with a transvaginal probe ranged from 0.6665 to 0.9911. The analysis of the measurements confirmed their consistency to be excellent or good. Conclusions Excellent and good repeatability and reproducibility of the measurements of the suburethral tape location obtained in a pelvic ultrasound performed with a transvaginal probe confirm the test’s validity and usefulness for clinical and academic purposes. PMID:28856017

[Development of a software standardizing optical density with operation settings related to several limitations].

PubMed

Tu, Xiao-Ming; Zhang, Zuo-Heng; Wan, Cheng; Zheng, Yu; Xu, Jin-Mei; Zhang, Yuan-Yuan; Luo, Jian-Ping; Wu, Hai-Wei

2012-12-01

To develop a software that can be used to standardize optical density to normalize the procedures and results of standardization in order to effectively solve several problems generated during standardization of in-direct ELISA results. The software was designed based on the I-STOD method with operation settings to solve the problems that one might encounter during the standardization. Matlab GUI was used as a tool for the development. The software was tested with the results of the detection of sera of persons from schistosomiasis japonica endemic areas. I-STOD V1.0 (WINDOWS XP/WIN 7, 0.5 GB) was successfully developed to standardize optical density. A serial of serum samples from schistosomiasis japonica endemic areas were used to examine the operational effects of I-STOD V1.0 software. The results indicated that the software successfully overcame several problems including reliability of standard curve, applicable scope of samples and determination of dilution for samples outside the scope, so that I-STOD was performed more conveniently and the results of standardization were more consistent. I-STOD V1.0 is a professional software based on I-STOD. It can be easily operated and can effectively standardize the testing results of in-direct ELISA.

Obtaining Crack-free WC-Co Alloys by Selective Laser Melting

NASA Astrophysics Data System (ADS)

Khmyrov, R. S.; Safronov, V. A.; Gusarov, A. V.

Standard hardmetals of WC-Co system are brittle and often crack at selective laser melting (SLM). The objective of this study is to estimate the range of WC/Co ratio where cracking can be avoided. Micron-sized Co powder was mixed with WC nanopowder in a ball mill to obtain uniform distribution of WC over the surface of Co particles. Continuous layers of remelted material on the surface of a hardmetal plate were obtained from this composite powder by SLM at 1.07μm wavelength. The layers have satisfactory porosity and are well bound to the substrate. The chemical composition of the layers matches the composition of the initial powder mixtures. The powder mixture with 25wt.%WC can be used for SLM to obtain materials without cracks. The powder mixture with 50wt.%WC cracks because of formation of brittle W3Co3C phase. Cracking can considerably reduce the mechanical strength, so that the use of this composition is not advised.

21 CFR 133.193 - Spiced, flavored standardized cheeses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Spiced, flavored standardized cheeses. 133.193... (CONTINUED) FOOD FOR HUMAN CONSUMPTION CHEESES AND RELATED CHEESE PRODUCTS Requirements for Specific Standardized Cheese and Related Products § 133.193 Spiced, flavored standardized cheeses. (a) Except as...

An evaluation of the accuracy of geomagnetic data obtained from an unattended, automated, quasi-absolute station

USGS Publications Warehouse

Herzog, D.C.

1990-01-01

A comparison is made of geomagnetic calibration data obtained from a high-sensitivity proton magnetometer enclosed within an orthogonal bias coil system, with data obtained from standard procedures at a mid-latitude U.S. Geological Survey magnetic observatory using a quartz horizontal magnetometer, a Ruska magnetometer, and a total field magnetometer. The orthogonal coil arrangement is used with the proton magnetometer to provide Deflected-Inclination-Deflected-Declination (DIDD) data from which quasi-absolute values of declination, horizontal intensity, and vertical intensity can be derived. Vector magnetometers provide the ordinate values to yield baseline calibrations for both the DIDD and standard observatory processes. Results obtained from a prototype system over a period of several months indicate that the DIDD unit can furnish adequate absolute field values for maintaining observatory calibration data, thus providing baseline control for unattended, remote stations. ?? 1990.

22 CFR 92.80 - Obtaining American vital statistics records.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Obtaining American vital statistics records. 92... statistics records. Individuals who inquire as to means of obtaining copies of or extracts from American... Vital Statistics Office at the place where the record is kept, which is usually in the capital city of...

22 CFR 92.80 - Obtaining American vital statistics records.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Obtaining American vital statistics records. 92... statistics records. Individuals who inquire as to means of obtaining copies of or extracts from American... Vital Statistics Office at the place where the record is kept, which is usually in the capital city of...

Validity of maximal isometric knee extension strength measurements obtained via belt-stabilized hand-held dynamometry in healthy adults.

PubMed

Ushiyama, Naoko; Kurobe, Yasushi; Momose, Kimito

2017-11-01

[Purpose] To determine the validity of knee extension muscle strength measurements using belt-stabilized hand-held dynamometry with and without body stabilization compared with the gold standard isokinetic dynamometry in healthy adults. [Subjects and Methods] Twenty-nine healthy adults (mean age, 21.3 years) were included. Study parameters involved right side measurements of maximal isometric knee extension strength obtained using belt-stabilized hand-held dynamometry with and without body stabilization and the gold standard. Measurements were performed in all subjects. [Results] A moderate correlation and fixed bias were found between measurements obtained using belt-stabilized hand-held dynamometry with body stabilization and the gold standard. No significant correlation and proportional bias were found between measurements obtained using belt-stabilized hand-held dynamometry without body stabilization and the gold standard. The strength identified using belt-stabilized hand-held dynamometry with body stabilization may not be commensurate with the maximum strength individuals can generate; however, it reflects such strength. In contrast, the strength identified using belt-stabilized hand-held dynamometry without body stabilization does not reflect the maximum strength. Therefore, a chair should be used to stabilize the body when performing measurements of maximal isometric knee extension strength using belt-stabilized hand-held dynamometry in healthy adults. [Conclusion] Belt-stabilized hand-held dynamometry with body stabilization is more convenient than the gold standard in clinical settings.

Hybrid nuclear reactor grey rod to obtain required reactivity worth

DOEpatents

Miller, John V.; Carlson, William R.; Yarbrough, Michael B.

1991-01-01

Hybrid nuclear reactor grey rods are described, wherein geometric combinations of relatively weak neutron absorber materials such as stainless steel, zirconium or INCONEL, and relatively strong neutron absorber materials, such as hafnium, silver-indium cadmium and boron carbide, are used to obtain the reactivity worths required to reach zero boron change load follow. One embodiment includes a grey rod which has combinations of weak and strong neutron absorber pellets in a stainless steel cladding. The respective pellets can be of differing heights. A second embodiment includes a grey rod with a relatively thick stainless steel cladding receiving relatively strong neutron absorber pellets only. A third embodiment includes annular relatively weak netron absorber pellets with a smaller diameter pellet of relatively strong absorber material contained within the aperture of each relatively weak absorber pellet. The fourth embodiment includes pellets made of a homogeneous alloy of hafnium and a relatively weak absorber material, with the percentage of hafnium chosen to obtain the desired reactivity worth.

Quality standards for rheumatology outpatient clinic. The EXTRELLA project.

PubMed

Nolla, Joan M; Martínez, Carmen; García-Vicuña, Rosario; Seoane-Mato, Daniel; Rosario Lozano, M Piedad; Alonso, Alberto; Alperi, Mercedes; Barbazán, Ceferino; Calvo, Jaime; Delgado, Concepción; Fernández-Nebro, Antonio; Mateo, Lourdes; Pérez Sandoval, Trinidad; Pérez Venegas, José; Rodríguez Lozano, Carlos; Rosas, José

2016-01-01

In recent years, outpatient clinics have undergone extensive development. At present, patients with rheumatic diseases are mainly assisted in this area. However, the quality standards of care are poorly documented. To develop specific quality criteria and standards for an outpatient rheumatology clinic. The project was based on the two-round Delphi method. The following groups of participants took part: scientific committee (13 rheumatologists), five nominal groups (45 rheumatologists and 12 nurses) and a group of discussion formed by 9 patients. Different drafts were consecutively generated until a final document was obtained that included the standards that received a punctuation equal or over 7 in at least 70% of the participants. 148 standards were developed, grouped into the following 9 dimensions: a) structure (22), b) clinical activity and relationship with the patients (34), c) planning (7), d) levels of priority (5), e) relations with primary care physicians, with Emergency Department and with other clinical departments, f) process (26), g) nursing (13), h) teaching and research (13) and i) activity measures (8). This study established specific quality standards for rheumatology outpatient clinic. It can be a useful tool for organising this area in the Rheumatology Department and as a reference when proposing improvement measures to health administrators. Copyright © 2015 Elsevier España, S.L.U. and Sociedad Española de Reumatología y Colegio Mexicano de Reumatología. All rights reserved.

Rabies vaccine standards: comparison of the 5th and 6th WHO international reference standards to the USDA veterinary reference standard.

PubMed

Hermann, J; Fry, A; Reising, M; Patterson, P; Siev, D; Gatewood, D

2012-11-06

Ensuring rabies vaccines are potent and effective is paramount in preventing transmission of this deadly disease and safeguarding public health. Efficacy of human and veterinary vaccines is ensured by evaluating relative potency estimates of the vaccine compared to a rabies reference standard using the National Institutes of Health (NIH) test. Reference vaccines are based on the International Standard for Rabies Vaccine provided by the World Health Organization (WHO). A comparison study was conducted to determine the relative potency of the 5th WHO, 6th WHO, and United States Department of Agriculture's (USDA) 08-14 reference standards using the NIH test. Results from the study demonstrate that the 6th WHO reference standard is approximately twice as potent as the 5th WHO reference when reconstituted to contain 1 IU per ml. Based on these results, the Center for Veterinary Biologics (CVB) doubled the reconstitution volume of USDA veterinary reference 08-14 from 13 ml to 26 ml, for an initial use dilution of 0.7 IU per ml for use by veterinary biologics manufacturers in the NIH test. This study emphasizes the importance of reference standard calibration for use in the National Institutes of Health test. Published by Elsevier Ltd.

The relative performance obtained with several methods of control of an overcompressed engine using gasoline

NASA Technical Reports Server (NTRS)

Gardiner, Arthur W; Whedon, William E

1928-01-01

This report presents some results obtained during an investigation to determine the relative characteristics for several methods of control of an overcompressed engine using gasoline and operating under sea-level conditions. For this work, a special single cylinder test engine, 5-inch bore by 7-inch stroke, and designed for ready adjustment of compression ratio, valve timing and valve lift while running, was used. This engine has been fully described in NACA-TR-250. Tests were made at an engine speed of 1,400 R. P. M. for compression ratios ranging from 4.0 to 7.6. The air-fuel ratios were on the rich side of the chemically correct mixture and were approximately those giving maximum power. When using plain domestic gasoline, detonation was controlled to a constant, predetermined amount (audible), such as would be permissible for continuous operation, by (a) throttling the carburetor, (b) maintaining full throttle but greatly retarding the ignition, and (c) varying the timing of the inlet valve to reduce the effective compression ratio. From the results of the tests, it may be concluded that method (b) gives the best all-round performance and, being easily employed in service, appears to be the most practicable method for controlling an overcompressed engine using gasoline at low altitudes.

The Council on Accreditation of Park, Recreation, Tourism, and Related Professions: 2013 Standards-- The Importance of Outcome-Based Assessment and the Connection to Student Learning

ERIC Educational Resources Information Center

Blazey, Michael A.

2014-01-01

The Council for Higher Education Accreditation (CHEA) adopted recognition standards in 2006 requiring regional and professional accreditors such as the Council on Accreditation of Park, Recreation, Tourism, and Related Professions (COAPRT) to adopt standards and practices advancing academic quality, demonstrating accountability, and encouraging…

76 FR 52737 - Oil and Natural Gas Sector: New Source Performance Standards and National Emission Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

...This action announces how the EPA proposes to address the reviews of the new source performance standards for volatile organic compound and sulfur dioxide emissions from natural gas processing plants. We are proposing to add to the source category list any oil and gas operation not covered by the current listing. This action also includes proposed amendments to the existing new source performance standards for volatile organic compounds from natural gas processing plants and proposed standards for operations that are not covered by the existing new source performance standards. In addition, this action proposes how the EPA will address the residual risk and technology review conducted for the oil and natural gas production and natural gas transmission and storage national emission standards for hazardous air pollutants. This action further proposes standards for emission sources within these two source categories that are not currently addressed, as well as amendments to improve aspects of these national emission standards for hazardous air pollutants related to applicability and implementation. Finally, this action addresses provisions in these new source performance standards and national emission standards for hazardous air pollutants related to emissions during periods of startup, shutdown and malfunction.

Subfossil remains of Pediastrum - a tool to obtain palaeolimnological information parallel to pollen analysis?

NASA Astrophysics Data System (ADS)

Turner, F.; Zhu, L.; Ma, Q.; Peng, P.; Lü, X.

2014-12-01

It has been a long-time goal of palynologists to obtain additionally palaeoenvironmental information by the study of Quaternary non-pollen-palynomorphs (NPPs) in pollen slides. As a group of NPPs, subfossil remains of green algae of the genus Pediastrum (fam. Hydrodictyaceae) are frequently found in lake sediments and withstand the palynological standard preparation methods. Determination of Pediastrum taxa to subspecies level is relatively easy with a standard light microscope. Very few studies, however, have used them as palaeolimnological indicators and the knowledge on recent distribution and ecology of many taxa is limited. Introducing new data from Northwestern Europe and the Tibetan Plateau, we show that analysis of subfossil Pediastrum assemblages can reveal valuable information on limnological and climate parameters. Shifts in taxonomic composition of Pediastrum assemblages from lake sediments in northern Germany are shown to strongly reflect the Northern Atlantic Late Glacial climate oscillations. In contrast to previous studies that recognized trophic state as the main driver of change in Pediastrum species composition, we identify climate shifts and related factors as the major drivers of community change. Water depth and trophic state probably acted as secondary factors only. Ongoing research compares the composition of Pediastrum assemblages in surface sediments of Tibetan lakes to environmental variables. While Pediastrum algae are shown to be a part of phytoplankton communities in freshwater to mesosaline lakes, shifts in species composition along the salinity gradient indicate the possible use of the algae group as palaeobioindicator for past humidity changes on the Tibetan Plateau. Additionally, investigations on the relation between water depth and the Pediastrum species composition in lake Taro Co (4575 m asl.) are presented. Our results suggest this algae group has great potential for enabling environmental inferences.

The second international standard for polymyxin B.

PubMed

Lightbown, J W; Thomas, A H; Grab, B; Outschoorn, A S

1973-01-01

Since supplies of the first International Standard for Polymyxin B were exhausted, it was replaced by a second international standard the potency of which was estimated from the results of a collaborative assay carried out by 5 laboratories in 4 countries. The wide variations in the results probably resulted from difficulties experienced in handling the first international standard. The potency finally agreed upon by the collaborating laboratories, on the basis of the overall mean values obtained after rejection of the most discrepant assays, was 8 403 IU/mg. That value was accepted by the WHO Expert Committee on Biological Standardization (1970), which consequently defined the International Unit of polymyxin B as the activity contained in 0.000119 mg of the second international standard.

The second international standard for polymyxin B*

PubMed Central

Lightbown, J. W.; Thomas, A. H.; Grab, B.; Outschoorn, A. S.

1973-01-01

Since supplies of the first International Standard for Polymyxin B were exhausted, it was replaced by a second international standard the potency of which was estimated from the results of a collaborative assay carried out by 5 laboratories in 4 countries. The wide variations in the results probably resulted from difficulties experienced in handling the first international standard. The potency finally agreed upon by the collaborating laboratories, on the basis of the overall mean values obtained after rejection of the most discrepant assays, was 8 403 IU/mg. That value was accepted by the WHO Expert Committee on Biological Standardization (1970), which consequently defined the International Unit of polymyxin B as the activity contained in 0.000119 mg of the second international standard. PMID:4350877

Role of standard documents in advancing the standardization of microfluidics connectors

NASA Astrophysics Data System (ADS)

Tantra, Ratna; van Heeren, Henne; Jarman, John

2016-04-01

An emerging trend within the microfluidic community is to standardize common parts in order to facilitate design and production activities. The goal is clear: to enhance interoperability and promote plug-and-play. A recent launch of a pan-European project, Microfluidic (MF) Manufacturing, has identified an item that is in immediate need of standardization: having in place geometrical specifications for MF connectors. In order to accelerate the adoption of such standards, there is a need to consider the pivotal role of standard documents. The purpose of this paper is to provide background information on document standards development. In addition, the future implications related to the MF manufacturing project will be discussed. A strengths, weaknesses, opportunities, and threats analysis has been carried out to identify points of action. The findings show that although there is a need to publish under International Organization for Standardization (ISO), the actual realization of a full ISO standard document is not feasible. The recommendation is to initially publish via an ISO Workshop Agreement. Parallel to such activity, there is a need to encourage stakeholders help kick start a currently dormant working group that supports microfluidics under ISO to help pave the way for future standardization activities in the microfluidics community.

The science behind the proposed maturity standard change

USDA-ARS?s Scientific Manuscript database

The current maturity standard for navel oranges in California has been in place for nearly 100 years yet does not always do a good job of ensuring that consumers obtain good-tasting fruit during the early season. Early work that was performed which supported adoption of the standard may have been ad...

Teachers' Evaluations and Use of Web-Based Curriculum Resources in Relation to the Common Core State Standards for Mathematics

ERIC Educational Resources Information Center

Webel, Corey; Krupa, Erin E.; McManus, Jason

2015-01-01

This study examines patterns in how a group of fifth- and sixth-grade teachers evaluated and reported using different types of curriculum resources to support their teaching in relation to the mathematical concepts outlined in the Common Core State Standards for Mathematics. In particular, it explores the use of resources that were available to…

The Influence of Bilectalism and Non-standardization on the Perception of Native Grammatical Variants

PubMed Central

Leivada, Evelina; Papadopoulou, Elena; Kambanaros, Maria; Grohmann, Kleanthes K.

2017-01-01

Research in speakers of closely related varieties has shown that bilectalism and non-standardization affect speakers’ perception of the variants that exist in their native languages in a way that is absent from the performance of their monolingual peers. One possible explanation for this difference is that non-standardization blurs the boundaries of grammatical variants and increases grammatical fluidity. Affected by such factors, bilectals become less accurate in identifying the variety to which a grammatical variant pertains. Another explanation is that their differential performance derives from the fact that they are competent in two varieties. Under this scenario, the difference is due to the existence of two linguistic systems in the course of development, and not to how close or standardized these systems are. This study employs a novel variety-judgment task in order to elucidate which of the two explanations holds. Having administered the task to monolinguals, bilectals, and bilinguals, including heritage language learners and L1 attriters, we obtained a dataset of 16,245 sentences. The analysis shows differential performance between bilectal and bilingual speakers, granting support for the first explanation. We discuss the role of factors such as non-standardization and linguistic proximity in language development and flesh out the implications of the results in relation to different developmental trajectories. PMID:28265248

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

Well-ionization chamber response relative to NIST air-kerma strength standard for prostate brachytherapy seeds.

PubMed

Mitch, M G; Zimmerman, B E; Lamperti, P J; Seltzer, S M; Coursey, B M

2000-10-01

The response of well-ionization chambers to the emissions of 103Pd and 125I radioactive seed sources used in prostate cancer brachytherapy has been measured. Calibration factors relating chamber response (current or dial setting) to measured air-kerma strength have been determined for seeds from nine manufacturers, each with different designs. Variations in well-ionization chamber response relative to measured air-kerma strength have been observed because of differences in the emitted energy spectrum due to both the radionuclide support material (125I seeds) and the mass ratio of 103Pd to 102Pd (103Pd seeds). Obtaining accurate results from quality assurance measurements using well-ionization chambers at a therapy clinic requires knowledge of such differences in chamber response as a function of seed design.

[Brief history of pharmaceutical standard system in China].

PubMed

Zhang, Jianwu; Xiao, Shiying; Dong, Guofeng; Liu, Wei; Di, Feng; Yang, Xujie

2010-03-01

Pharmaceutical standard system which belongs to an important part of national drug policies is an inevitable result of the development of pharmacy. There was a long standing of pharmaceutical standard system in China whose germination could be traced back to Qin and Han dynasties, and it had laid a solid foundation for the establishment and improvement of modern pharmaceutical standard system by continual accumulation from the past dynasties. Since the founding of new China, distinguished achievements had been obtained on pharmaceutical standardization working,and currently it is in a new developing stage. There was a brief description in this paper on the development history of pharmaceutical standard system in China.

A frequency standard via spectrum analysis and direct digital synthesis

NASA Astrophysics Data System (ADS)

Li, Dawei; Shi, Daiting; Hu, Ermeng; Wang, Yigen; Tian, Lu; Zhao, Jianye; Wang, Zhong

2014-11-01

We demonstrated a frequency standard based on a detuned coherent population beating phenomenon. In this phenomenon, the beat frequency of the radio frequency for laser modulation and the hyperfine splitting can be obtained by digital signal processing technology. After analyzing the spectrum of the beat frequency, the fluctuation information is obtained and applied to compensate for the frequency shift to generate the standard frequency by the digital synthesis method. Frequency instability of 2.6 × 1012 at 1000 s is observed in our preliminary experiment. By eliminating the phase-locking loop, the method will enable us to achieve a full-digital frequency standard with remarkable stability.

Development of QC Procedures for Ocean Data Obtained by National Research Projects of Korea

NASA Astrophysics Data System (ADS)

Kim, S. D.; Park, H. M.

2017-12-01

To establish data management system for ocean data obtained by national research projects of Ministry of Oceans and Fisheries of Korea, KIOST conducted standardization and development of QC procedures. After reviewing and analyzing the existing international and domestic ocean-data standards and QC procedures, the draft version of standards and QC procedures were prepared. The proposed standards and QC procedures were reviewed and revised by experts in the field of oceanography and academic societies several times. A technical report on the standards of 25 data items and 12 QC procedures for physical, chemical, biological and geological data items. The QC procedure for temperature and salinity data was set up by referring the manuals published by GTSPP, ARGO and IOOS QARTOD. It consists of 16 QC tests applicable for vertical profile data and time series data obtained in real-time mode and delay mode. Three regional range tests to inspect annual, seasonal and monthly variations were included in the procedure. Three programs were developed to calculate and provide upper limit and lower limit of temperature and salinity at depth from 0 to 1550m. TS data of World Ocean Database, ARGO, GTSPP and in-house data of KIOST were analysed statistically to calculate regional limit of Northwest Pacific area. Based on statistical analysis, the programs calculate regional ranges using mean and standard deviation at 3 kind of grid systems (3° grid, 1° grid and 0.5° grid) and provide recommendation. The QC procedures for 12 data items were set up during 1st phase of national program for data management (2012-2015) and are being applied to national research projects practically at 2nd phase (2016-2019). The QC procedures will be revised by reviewing the result of QC application when the 2nd phase of data management programs is completed.

ITS Standards Advisory : Dynamic Message Signs (DMS)

DOT National Transportation Integrated Search

2003-01-01

ITS Standards Advisories provide the transportation community with information and guidance on key activities related to ITS standards, with each Advisory focusing on a single ITS application and its corresponding standards. This advisory focuses on ...

In vivo standardization of bone ultrasonometry of the clavicle.

PubMed

Mandarano-Filho, Luiz Garcia; Bezuti, Márcio Takey; Barbieri, Cláudio Henrique

2016-03-01

The assessment of fracture union includes physical examination and radiographic imaging, which depend on the examiner's experience. The development of ancillary methods may avoid prolonged treatments and the improper removal of implants. Quantitative bone ultrasonometry has been studied for this purpose and will soon be included in clinical practice. The aims of the present study were to assess the feasibility of using this technique on the clavicle and to standardize its in vivo application. Twenty adult volunteers, including 10 men and 10 women without medical conditions or a previous history of clavicle fracture, underwent axial quantitative ultrasonometric assessment using transducers in various positions (different distances between the transducers and different angulations relative to the clavicle). Similar values of wave propagation velocity were obtained in the different tested set-ups, which included distinct distances between the transducers and angular positions relative to the clavicle. There were significant differences only in the transducers positioned at 0° and at 5 or 7 cm apart. The use of bone ultrasonometry on the clavicle is feasible and the standardization of the technique proposed in this study (transducers placed at 45° and at 7 cm apart) will allow its future application in clinical trials to evaluate the healing process of diaphyseal fractures of the clavicle.

Peer Victimization as a Mediator of the Relation between Facial Attractiveness and Internalizing Problems

ERIC Educational Resources Information Center

Rosen, Lisa H.; Underwood, Marion K.; Beron, Kurt J.

2011-01-01

This study examined the relations among facial attractiveness, peer victimization, and internalizing problems in early adolescence. We hypothesized that experiences of peer victimization would partially mediate the relationship between attractiveness and internalizing problems. Ratings of attractiveness were obtained from standardized photographs…

The International Standard for Aureomycin

PubMed Central

Humphrey, J. H.; Lightbown, J. W.; Mussett, M. V.; Perry, W. L. M.

1953-01-01

In 1950, the Department of Biological Standards, National Institute for Medical Research, London, was authorized by the WHO Expert Committee on Biological Standardization to proceed with the establishment of an International Standard for Aureomycin. A 100-g batch of aureomycin was obtained and was compared with the Standard Preparation of Aureomycin of the United States Food and Drug Administration (FDA) in a collaborative assay in which six laboratories in five countries participated. In all, 30 assays were carried out; 26 of these were done by biological methods, using Sarcina lutea, Bacillus pumilus, Staphylococcus aureus, or Bacillus cereus, and the remaining four by physicochemical methods. The results were subjected to standard methods of analysis, and the overall weighted mean potency (calculated from the biological assays only) was 1.0139, with limits of error of 99.5% to 100.5%. Since the International Standard is 1.39% more potent than the FDA Standard Preparation, it is probable that the latter contains a small amount of inert material; it is also possible that the International Standard itself is not 100% pure. For most practical purposes, however, both preparations may be regarded as substantially pure, and it is considered that to alter the present practice of quoting aureomycin dosage in metric units of weight would be inadvisable. Nevertheless, since the International Standard may not be a pure substance, a unit notation—for use where required in bioassays—is desirable, and the International Unit of Aureomycin has therefore been defined as the activity contained in one microgram of the International Standard. PMID:13141137

Animal models for percutaneous-device-related infections: a review.

PubMed

Shao, Jinlong; Kolwijck, Eva; Jansen, John A; Yang, Fang; Walboomers, X Frank

2017-06-01

This review focuses on the construction of animal models for percutaneous-device-related infections, and specifically the role of inoculation of bacteria in such models. Infections around percutaneous devices, such as catheters, dental implants and limb prostheses, are a recurrent and persistent clinical problem. To promote the research on this clinical problem, the establishment of a reliable and validated animal model would be of keen interest. In this review, literature related to percutaneous devices was evaluated, and particular attention was paid to studies involving the use of bacteria. The design of percutaneous devices, susceptibility of various animal species, bacterial strains, amounts of bacteria, method of inoculation and methods for subsequent evaluation of the infection are discussed in detail. Given that an ideal animal model for study of percutaneous-device-related infection is still not existent, this article presents the basis for the construction of such a standardized animal model for percutaneous-device-related infection studies. The inoculation of bacteria is critical to obtain an animal model for standardized studies for percutaneous-device-related infections. Copyright © 2017. Published by Elsevier B.V.

Executing Complexity-Increasing Queries in Relational (MySQL) and NoSQL (MongoDB and EXist) Size-Growing ISO/EN 13606 Standardized EHR Databases

PubMed Central

Sánchez-de-Madariaga, Ricardo; Muñoz, Adolfo; Castro, Antonio L; Moreno, Oscar; Pascual, Mario

2018-01-01

This research shows a protocol to assess the computational complexity of querying relational and non-relational (NoSQL (not only Structured Query Language)) standardized electronic health record (EHR) medical information database systems (DBMS). It uses a set of three doubling-sized databases, i.e. databases storing 5000, 10,000 and 20,000 realistic standardized EHR extracts, in three different database management systems (DBMS): relational MySQL object-relational mapping (ORM), document-based NoSQL MongoDB, and native extensible markup language (XML) NoSQL eXist. The average response times to six complexity-increasing queries were computed, and the results showed a linear behavior in the NoSQL cases. In the NoSQL field, MongoDB presents a much flatter linear slope than eXist. NoSQL systems may also be more appropriate to maintain standardized medical information systems due to the special nature of the updating policies of medical information, which should not affect the consistency and efficiency of the data stored in NoSQL databases. One limitation of this protocol is the lack of direct results of improved relational systems such as archetype relational mapping (ARM) with the same data. However, the interpolation of doubling-size database results to those presented in the literature and other published results suggests that NoSQL systems might be more appropriate in many specific scenarios and problems to be solved. For example, NoSQL may be appropriate for document-based tasks such as EHR extracts used in clinical practice, or edition and visualization, or situations where the aim is not only to query medical information, but also to restore the EHR in exactly its original form. PMID:29608174

Executing Complexity-Increasing Queries in Relational (MySQL) and NoSQL (MongoDB and EXist) Size-Growing ISO/EN 13606 Standardized EHR Databases.

PubMed

Sánchez-de-Madariaga, Ricardo; Muñoz, Adolfo; Castro, Antonio L; Moreno, Oscar; Pascual, Mario

2018-03-19

This research shows a protocol to assess the computational complexity of querying relational and non-relational (NoSQL (not only Structured Query Language)) standardized electronic health record (EHR) medical information database systems (DBMS). It uses a set of three doubling-sized databases, i.e. databases storing 5000, 10,000 and 20,000 realistic standardized EHR extracts, in three different database management systems (DBMS): relational MySQL object-relational mapping (ORM), document-based NoSQL MongoDB, and native extensible markup language (XML) NoSQL eXist. The average response times to six complexity-increasing queries were computed, and the results showed a linear behavior in the NoSQL cases. In the NoSQL field, MongoDB presents a much flatter linear slope than eXist. NoSQL systems may also be more appropriate to maintain standardized medical information systems due to the special nature of the updating policies of medical information, which should not affect the consistency and efficiency of the data stored in NoSQL databases. One limitation of this protocol is the lack of direct results of improved relational systems such as archetype relational mapping (ARM) with the same data. However, the interpolation of doubling-size database results to those presented in the literature and other published results suggests that NoSQL systems might be more appropriate in many specific scenarios and problems to be solved. For example, NoSQL may be appropriate for document-based tasks such as EHR extracts used in clinical practice, or edition and visualization, or situations where the aim is not only to query medical information, but also to restore the EHR in exactly its original form.

78 FR 2946 - United States Standards for Grades of Frozen Vegetables

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... these proposed revisions are: frozen asparagus, frozen lima beans, frozen speckled butter beans, frozen... document. United States Standards for Grades of Frozen Lima Beans Update address for AMS. Change ``U.S... obtain color standards for frozen lima beans. United States Standards for Grades of Frozen Mixed...

Double standards: the multinational asbestos industry and asbestos-related disease in South Africa.

PubMed

McCulloch, Jock; Tweedale, Geoffrey

2004-01-01

This study documents and contrasts the development of knowledge about asbestos-related disease (ARD) in South Africa and the United Kingdom. It also contributes to the globalization debate by exploring corporate decision-making in a multinational industry. Between the 1930s and 1960s, the leading U.K. asbestos companies developed a sophisticated knowledge of ARD, though in South Africa, where the leading companies such as Turner & Newall and Cape Asbestos owned mines, there was little attempt to apply this knowledge. Asbestos mines (and their environments) in South Africa were uniquely dusty and ARD was rife. Social and political factors in South Africa, especially apartheid, allowed these companies to apply double standards, even after 1960 when the much more serious hazard of mesothelioma was identified. This shows the need for greater regulation of multinationals. Because of the lack of such regulation in the early 1960s, an opportunity was lost to prevent the current high morbidity and mortality of ARD both in South Africa and worldwide.

Drinking water standard for tritium-what's the risk?

PubMed

Kocher, D C; Hoffman, F O

2011-09-01

This paper presents an assessment of lifetime risks of cancer incidence associated with the drinking water standard for tritium established by the U.S. Environmental Protection Agency (USEPA); this standard is an annual-average maximum contaminant level (MCL) of 740 Bq L(-1). This risk assessment has several defining characteristics: (1) an accounting of uncertainty in all parameters that relate a given concentration of tritium in drinking water to lifetime risk (except the number of days of consumption of drinking water in a year and the number of years of consumption) and an accounting of correlations of uncertain parameters to obtain probability distributions that represent uncertainty in estimated lifetime risks of cancer incidence; (2) inclusion of a radiation effectiveness factor (REF) to represent an increased biological effectiveness of low-energy electrons emitted in decay of tritium compared with high-energy photons; (3) use of recent estimates of risks of cancer incidence from exposure to high-energy photons, including the dependence of risks on an individual's gender and age, in the BEIR VII report; and (4) inclusion of risks of incidence of skin cancer, principally basal cell carcinoma. By assuming ingestion of tritium in drinking water at the MCL over an average life expectancy of 80 y in females and 75 y in males, 95% credibility intervals of lifetime risks of cancer incidence obtained in this assessment are (0.35, 12) × 10(-4) in females and (0.30, 15) × 10(-4) in males. Mean risks, which are considered to provide the best single measure of expected risks, are about 3 × 10(-4) in both genders. In comparison, USEPA's point estimate of the lifetime risk of cancer incidence, assuming a daily consumption of drinking water of 2 L over an average life expectancy of 75.2 y and excluding an REF for tritium and incidence of skin cancer, is 5.6 × 10(-5). Probability distributions of annual equivalent doses to the whole body associated with the drinking

22 CFR 42.1 - Aliens not required to obtain immigrant visas.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Aliens not required to obtain immigrant visas... Immigrants § 42.1 Aliens not required to obtain immigrant visas. An immigrant within any of the following categories is not required to obtain an immigrant visa: (a) Aliens lawfully admitted for permanent residence...

22 CFR 42.1 - Aliens not required to obtain immigrant visas.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Aliens not required to obtain immigrant visas... Immigrants § 42.1 Aliens not required to obtain immigrant visas. An immigrant within any of the following categories is not required to obtain an immigrant visa: (a) Aliens lawfully admitted for permanent residence...

22 CFR 42.1 - Aliens not required to obtain immigrant visas.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Aliens not required to obtain immigrant visas... Immigrants § 42.1 Aliens not required to obtain immigrant visas. An immigrant within any of the following categories is not required to obtain an immigrant visa: (a) Aliens lawfully admitted for permanent residence...

22 CFR 42.1 - Aliens not required to obtain immigrant visas.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Aliens not required to obtain immigrant visas... Immigrants § 42.1 Aliens not required to obtain immigrant visas. An immigrant within any of the following categories is not required to obtain an immigrant visa: (a) Aliens lawfully admitted for permanent residence...

22 CFR 42.1 - Aliens not required to obtain immigrant visas.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Aliens not required to obtain immigrant visas... Immigrants § 42.1 Aliens not required to obtain immigrant visas. An immigrant within any of the following categories is not required to obtain an immigrant visa: (a) Aliens lawfully admitted for permanent residence...

Teachers' Perceptions of Preparedness Related to National Common Core State Standards for Mathematics

ERIC Educational Resources Information Center

Brown, Tykier

2016-01-01

With the adoption of the National Common Core State Standards in Mathematics (CCSSM) in many states and the lack of understanding and strategies to implement the new standards by classroom teachers, implementing effective professional development is vital. The focus of this qualitative case study was to provide insight into elementary school…

The Congruence of Nurses’ Performance with Developmental Care Standards in Neonatal Intensive Care Units

PubMed Central

Valizadeh, Leila; Asadollahi, Malihe; Mostafa Gharebaghi, Manizheh; Gholami, Fatemeh

2013-01-01

Introduction: Many studies support the positive short and long-term developmental care for premature infants. This study aimed to determine the congruence of nurses’ activity in four areas of developmental care in order to obtain basic information for authorities to provide a program to achieve related standards in the future. Methods: The study was performed on 70 nurses working in neonatal intensive care units in Tabriz, Iran. Nurses answered to a questionnaire retrieved from Robison’s developmental program. Content validity and reliability (Cronbach’s alpha) of translated version were evaluated. Data were analysed using SPSS. Results: The mean (standard deviation) of total score was 3.06 (0.44). It was 3.02 (0.50) for individualized care, 3.01 (0.63) for appropriate development environment for the child and family, 3 (0.46) in supporting family relationship and approving the relationship between infant and family and 3.22 (0.56) for collaboration among all care factors. Score 4 was considered as completely meet standards. Therefore, a mean of 3.20 and above was considered as observance higher than 80% and was favorable. The Friedman test showed statistically significant difference among the activities related to the four areas (p = 0.001). The collaboration field had the highest mean score and providing services in this field had more congruence with the related standard of developmental care. Conclusion: The study showed that the congruence of nurses’ performance with standards of developmental care still requires more efforts. Therefore, it is necessary to train the staff in this regard and prepare them for structural and functional facilities. PMID:25276711

32 CFR 37.845 - What data rights should I obtain?

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Award Terms Related to Other Administrative Matters Intellectual Property § 37.845 What data rights should I obtain? (a) You should seek to obtain what you, with... intends to protect any invention as a trade secret, you should consult with your intellectual property...

32 CFR 37.845 - What data rights should I obtain?

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Award Terms Related to Other Administrative Matters Intellectual Property § 37.845 What data rights should I obtain? (a) You should seek to obtain what you, with... intends to protect any invention as a trade secret, you should consult with your intellectual property...

Current situation of International Organization for Standardization/Technical Committee 249 international standards of traditional Chinese medicine.

PubMed

Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping

2017-05-01

To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.

Standard setting: the crucial issues. A case study of accounting & auditing.

PubMed

Nowakowski, J R

1982-01-01

A study of standard-setting efforts in accounting and auditing is reported. The study reveals four major areas of concern in a professional standard-setting effort: (1) issues related to the rationale for setting standards, (2) issues related to the standard-setting board and its support structure, (3) issues related to the content of standards and rules for generating them, and (4) issues that deal with how standards are put to use. Principles derived from the study of accounting and auditing are provided to illuminate and assess standard-setting efforts in evaluation.

Obtaining information by dynamic (effortful) touching

PubMed Central

Turvey, M. T.; Carello, Claudia

2011-01-01

Dynamic touching is effortful touching. It entails deformation of muscles and fascia and activation of the embedded mechanoreceptors, as when an object is supported and moved by the body. It is realized as exploratory activities that can vary widely in spatial and temporal extents (a momentary heft, an extended walk). Research has revealed the potential of dynamic touching for obtaining non-visual information about the body (e.g. limb orientation), attachments to the body (e.g. an object's height and width) and the relation of the body both to attachments (e.g. hand's location on a grasped object) and surrounding surfaces (e.g. places and their distances). Invariants over the exploratory activity (e.g. moments of a wielded object's mass distribution) seem to ground this ‘information about’. The conception of a haptic medium as a nested tensegrity structure has been proposed to express the obtained information realized by myofascia deformation, by its invariants and transformations. The tensegrity proposal rationalizes the relative indifference of dynamic touch to the site of mechanical contact (hand, foot, torso or probe) and the overtness of exploratory activity. It also provides a framework for dynamic touching's fractal nature, and the finding that its degree of fractality may matter to its accomplishments. PMID:21969694

A review of the quantum current standard

NASA Astrophysics Data System (ADS)

Kaneko, Nobu-Hisa; Nakamura, Shuji; Okazaki, Yuma

2016-03-01

The electric current, voltage, and resistance standards are the most important standards related to electricity and magnetism. Of these three standards, only the ampere, which is the unit of electric current, is an International System of Units (SI) base unit. However, even with modern technology, relatively large uncertainty exists regarding the generation and measurement of current. As a result of various innovative techniques based on nanotechnology and novel materials, new types of junctions for quantum current generation and single-electron current sources have recently been proposed. These newly developed methods are also being used to investigate the consistency of the three quantum electrical effects, i.e. the Josephson, quantum Hall, and single-electron tunneling effects, which are also known as ‘the quantum metrology triangle’. This article describes recent research and related developments regarding current standards and quantum-metrology-triangle experiments.

Proposed minimum reporting standards for chemical analysis Chemical Analysis Working Group (CAWG) Metabolomics Standards Initiative (MSI)

PubMed Central

Amberg, Alexander; Barrett, Dave; Beale, Michael H.; Beger, Richard; Daykin, Clare A.; Fan, Teresa W.-M.; Fiehn, Oliver; Goodacre, Royston; Griffin, Julian L.; Hankemeier, Thomas; Hardy, Nigel; Harnly, James; Higashi, Richard; Kopka, Joachim; Lane, Andrew N.; Lindon, John C.; Marriott, Philip; Nicholls, Andrew W.; Reily, Michael D.; Thaden, John J.; Viant, Mark R.

2013-01-01

There is a general consensus that supports the need for standardized reporting of metadata or information describing large-scale metabolomics and other functional genomics data sets. Reporting of standard metadata provides a biological and empirical context for the data, facilitates experimental replication, and enables the re-interrogation and comparison of data by others. Accordingly, the Metabolomics Standards Initiative is building a general consensus concerning the minimum reporting standards for metabolomics experiments of which the Chemical Analysis Working Group (CAWG) is a member of this community effort. This article proposes the minimum reporting standards related to the chemical analysis aspects of metabolomics experiments including: sample preparation, experimental analysis, quality control, metabolite identification, and data pre-processing. These minimum standards currently focus mostly upon mass spectrometry and nuclear magnetic resonance spectroscopy due to the popularity of these techniques in metabolomics. However, additional input concerning other techniques is welcomed and can be provided via the CAWG on-line discussion forum at http://msi-workgroups.sourceforge.net/ or http://Msi-workgroups-feedback@lists.sourceforge.net. Further, community input related to this document can also be provided via this electronic forum. PMID:24039616

Revision of the NIST Standard for (223)Ra: New Measurements and Review of 2008 Data.

PubMed

Zimmerman, B E; Bergeron, D E; Cessna, J T; Fitzgerald, R; Pibida, L

2015-01-01

After discovering a discrepancy in the transfer standard currently being disseminated by the National Institute of Standards and Technology (NIST), we have performed a new primary standardization of the alpha-emitter (223)Ra using Live-timed Anticoincidence Counting (LTAC) and the Triple-to-Double Coincidence Ratio Method (TDCR). Additional confirmatory measurements were made with the CIEMAT-NIST efficiency tracing method (CNET) of liquid scintillation counting, integral γ-ray counting using a NaI(Tl) well counter, and several High Purity Germanium (HPGe) detectors in an attempt to understand the origin of the discrepancy and to provide a correction. The results indicate that a -9.5 % difference exists between activity values obtained using the former transfer standard relative to the new primary standardization. During one of the experiments, a 2 % difference in activity was observed between dilutions of the (223)Ra master solution prepared using the composition used in the original standardization and those prepared using 1 mol·L(-1) HCl. This effect appeared to be dependent on the number of dilutions or the total dilution factor to the master solution, but the magnitude was not reproducible. A new calibration factor ("K-value") has been determined for the NIST Secondary Standard Ionization Chamber (IC "A"), thereby correcting the discrepancy between the primary and secondary standards.

Length standards and the Twin Paradox in the Special Theory of Relativity

NASA Astrophysics Data System (ADS)

Carrubba, James Gasper

In this Thesis I work towards a discussion of several resolutions of the Twin Paradox by exploring the Lorentz transformations. I begin by asking what it means for a moving length to contract, a question which obviously cannot be divorced from the propagation of length standards from one reference frame to another. I emphasize the conventionality of definitions of length. I go on to argue that it is the imposition of clock synchronization-the conventionality of one-way speeds- and not the effects of acceleration which leads to the asymmetry of light speed observed in Sagnac effect; and further, that this asymmetry leads to apparent paradoxes which are easily resolved when we take into account general covariance. In subsequent discussion of light-speed conventionality, I prove that any transform which preserves synchronization consistent with Michelson-Morley must be a similarity transform; and use this to demonstrate that not all results which appear to depend on Special Relativity actually do. I conclude this Thesis with an argument that the Twin Paradox cannot be resolved consistently if we impose simultaneously all 'physical' conditions which various resolutions impose in part.

Measurement standards for interdisciplinary medical rehabilitation.

PubMed

Johnston, M V; Keith, R A; Hinderer, S R

1992-12-01

Rehabilitation must address problems inherent in the measurement of human function and health-related quality of life, as well as problems in diagnosis and measurement of impairment. This educational document presents an initial set of standards to be used as guidelines for development and use of measurement and evaluation procedures and instruments for interdisciplinary, health-related rehabilitation. Part I covers general measurement principles and technical standards, beginning with validity, the central consideration for use of measures. Subsequent sections focus on reliability and errors of measurement, norms and scaling, development of measures, and technical manuals and guides. Part II covers principles and standards for use of measures. General principles of application of measures in practice are discussed first, followed by standards to protect persons being measured and then by standards for administrative applications. Many explanations, examples, and references are provided to help professionals understand measurement principles. Improved measurement will ensure the basis of rehabilitation as a science and nourish its success as a clinical service.

Evaluation of cross-connected waveguides as transfer standards of transmission at high millimetre-wave frequencies

NASA Astrophysics Data System (ADS)

Ridler, Nick; Clarke, Roland; Huang, Hui; Zinal, Sherko

2016-08-01

At the present time, transfer and verification standards of transmission coefficient (or, equivalently, transmission loss) are not readily available at high millimetre-wave frequencies (i.e. at frequencies ranging typically from 100 GHz to 300 GHz). In recent years, cross-connected waveguide devices have been proposed to provide calculable standards of transmission loss at these frequencies. This paper investigates the viability of these cross-connected waveguides as transfer standards of transmission for inter-laboratory measurement comparison exercises. This relates to their potential use in activities such as international key comparison exercises and measurement audit programmes. A trial inter-laboratory comparison involving four laboratories using two cross-connected waveguides in the WR-05 waveguide size (covering frequencies from 140 GHz to 220 GHz) is described and includes an analysis of the measurement results obtained during the comparison exercise.

[Preparation of flavonoid reference standards from Scutellariae Radix under the guidance of high performance liquid chromatography-mass spectrometry analysis].

PubMed

Guo, Henan; Yang, Xuedong; Liu, Jun; Zheng, Wenfeng

2012-07-01

Flavonoid reference standards were targeted-prepared from Scutellariae Radix under the guidance of high performance liquid chromatography-mass spectrometry (HPLC-MS) analysis. With HPLC-MS analysis of Scutellariae Radix, 19 flavonoid components were identified by analyzing and comparing their retention times, ultraviolet spectra, and mass spectrometry data with literature. The separation and purification protocols of all targeted flavonoid reference standards were optimally designed according to the results of HPLC-MS analysis and related literature. The ethanol extract of Scutellariae Radix was suspended in water and extracted with petroleum ether, ethyl acetate, and n-butanol successively. The ethyl acetate extract and n-butanol extract were separately subjected to primary separation by low pressure reverse phase preparative chromatography. Then the fractions containing targeted compounds were further purified by low pressure reverse and normal phases preparative chromatography. Finally, baicalin and wogonoside reference standards were obtained from n-butanol extract; baicaelin, wogonin, and oroxylin A reference standards were obtained from ethyl acetate extract. The structures of the 5 reference standards were identified by mass spectrometry (MS) and 1H nuclear magnetic resonance (1H NMR) spectroscopy. The HPLC analytical results showed that the purities of the 5 reference standards were all above 98%. It is demonstrated that the rapid targeted-preparation method under the guidance of the HPLC-MS analysis is applicable for the isolation and preparation of chemical components in traditional Chinese medicines.

Standard deviation index for stimulated Brillouin scattering suppression with different homogeneities.

PubMed

Ran, Yang; Su, Rongtao; Ma, Pengfei; Wang, Xiaolin; Zhou, Pu; Si, Lei

2016-05-10

We present a new quantitative index of standard deviation to measure the homogeneity of spectral lines in a fiber amplifier system so as to find the relation between the stimulated Brillouin scattering (SBS) threshold and the homogeneity of the corresponding spectral lines. A theoretical model is built and a simulation framework has been established to estimate the SBS threshold when input spectra with different homogeneities are set. In our experiment, by setting the phase modulation voltage to a constant value and the modulation frequency to different values, spectral lines with different homogeneities can be obtained. The experimental results show that the SBS threshold increases negatively with the standard deviation of the modulated spectrum, which is in good agreement with the theoretical results. When the phase modulation voltage is confined to 10 V and the modulation frequency is set to 80 MHz, the standard deviation of the modulated spectrum equals 0.0051, which is the lowest value in our experiment. Thus, at this time, the highest SBS threshold has been achieved. This standard deviation can be a good quantitative index in evaluating the power scaling potential in a fiber amplifier system, which is also a design guideline in suppressing the SBS to a better degree.

7 CFR 42.142 - Curve for obtaining Operating Characteristic (OC) curve information for skip lot sampling and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... CONDITION OF FOOD CONTAINERS Miscellaneous § 42.142 Curve for obtaining Operating Characteristic (OC) curve...

78 FR 73424 - Retirement of Requirements in Reliability Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-06

... predicated on the view that many violations of requirements currently included in Reliability Standards pose... for Bulk-Power System reliability or may be redundant. The Commission is interested in obtaining views... redundant. The Commission is interested in obtaining views on whether such requirements could be removed...

Microstructural investigation of hardfacing weld deposit obtained from CrB paste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kr. Ray, S.; Sarker, B.; Kr. Bhattacharya, S.

Hardfacing weld deposits are used as a protective layer on engineering components and tools subjected to different modes of wear. Cheaper iron-based alloys with chromium and carbon or relatively expensive alloys with some niobium or titanium have long been used as standard hardfacing materials. In recent years boron has substituted the costlier alloying elements and the newly developed Fe-B-C alloys have shown encouraging results. The microstructure of the welded hardfacing deposit is one of the most important factors that determine its performance. The amount, size, distribution and hardness of the individual constituents play important roles in imparting the desired properties.more » Recently Colomonoy sweat on paste containing fine CrB particles (of about 12 {mu}m average size) suspended in an organic binder has been marketed as the new generation hardfacing material. A thin coating of the paste is applied on the component surface, allowed to dry and welded. The welded deposit has been found to offer good wear resistance in many industrial applications. This paper reports the microstructural investigation of the welded deposit obtained from this paste.« less

31 CFR 317.7 - Obtaining and accounting for bond stock.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Obtaining and accounting for bond stock. 317.7 Section 317.7 Money and Finance: Treasury Regulations Relating to Money and Finance... AGENCIES FOR ISSUE OF UNITED STATES SAVINGS BONDS § 317.7 Obtaining and accounting for bond stock. An...

Water Resources Council Proposed Principles and Standards for Planning Water and Related Land Resources. Notice of Public Review and Hearing.

ERIC Educational Resources Information Center

National Archives and Records Services (GSA), Washington, DC. Office of the Federal Register.

Presented in this notice of a public review and hearing are the proposed Principles and Standards for planning water and related land resources of the United States. Developed by the Water Resources Council pursuant to the Water Resources Planning Act of 1965 (Public Law 89-80), the purpose is to achieve objectives, determined cooperatively,…

High Standards or a High Standard of Standardness?

ERIC Educational Resources Information Center

McWilliam, Erica

2010-01-01

This paper explores the difference between "high standards" and a "high standard of standardness" of professional service provision in teacher-librarianship. That is to say, it explores the difference between a demonstrated deep commitment to 21st century learning ("high standards") and demonstrated compliance with a pre-determined checklist of…

Linking rights and standards: the process of developing "rights-based" minimum standards on food security, nutrition and food aid.

PubMed

Young, Helen; Taylor, Anna; Way, Sally-Anne; Leaning, Jennifer

2004-06-01

This article examines the recent revision of the Sphere Minimum Standards in disaster response relating to food security, nutrition and food aid. It describes how the revision attempted to incorporate the principles of the Humanitarian Charter, as well as relevant human rights principles and values into the Sphere Minimum Standards. The initial aim of the revision was to ensure that the Sphere Minimum Standards better reflected the principles embodied in the Humanitarian Charter. This was later broadened to ensure that key legal standards and principles from human rights and humanitarian law were considered and also incorporated, in part to fill the "protection gap" within the existing standards. In relation to the food security, nutrition and food aid standards, it was agreed by participants in the process that the human right to adequate food and freedom from hunger should be incorporated. In relation to more general principles underlying the Humanitarian Charter, itself drawn largely from human rights and humanitarian law, it was agreed that there was a need to strengthen "protection" elements within the standards and a need to incorporate the basic principles of the right to life with dignity, non-discrimination, impartiality and participation, as well as to explore the relevance of the concept of the progressive realisation of the right to food. The questions raised in linking rights to operational standards required thought, on the one hand, about whether the technical standards reflected a deep understanding of the values expressed within the legal instruments, and whether the existing standards were adequate in relation to those legal rights. On the other hand, it also required reflection on how operational standards like Sphere could give concrete content to human rights, such as the right to food and the right to be free from hunger. However, there remain challenges in examining what a rights-based approach will mean in terms of the role of humanitarian

[Standardized CT/HRCT-classification of the German Federal Republic for work and environmental related thoracic diseases].

PubMed

Hering, K G; Tuengerthal, S; Kraus, T

2004-05-01

High resolution computed tomography (HRCT) plays an indispensable role in the diagnosis of pneumoconiosis and other lung damage arising from inhalation. Till now, however, there has been no agreed standardized convention for the use of the technique, or for documenting results uniformly. A task-group on Diagnostic Radiology in Occupational and Environmental Diseases of the German Radiological Society has produced a coding sheet based on experience gained in production of consultants' clinical reports, experts' examinations of patients seeking compensation for occupational lung disease, and physicians' professional development courses. The coding sheet has been used in a national multicenter study. It has been further developed and tested by an international working group comprising experts from Belgium (P.A. Gevenois), Germany (K.G. Hering, T. Kraus, S. Tuengerthal), Finland (L. Kivisaari, T. Vehmas), France (M. Letourneux), Great Britain (M.D. Crane), Japan (H. Arikawa, Y. Kusaka, N. Suganuma), and the USA (J. Parker). The intention is to standardize documentation of computertomographic findings in occupationally and environmentally related lung and pleural changes, and to facilitate international comparisons of results. Such comparisons were found to be achievable reproducibly with the help of CT/HRCT reference films. The classification scheme is purely descriptive (rather than diagnostic), so that all aspects of occupationally and environmentally related parenchymal and pleural abnormalities may be recorded. Although some of the descriptive terms used are associated with pneumoconiosis (e.g., rounded opacities in silicosis, or, in asbestosis, interlobular septal and intralobular non-septal lines, as well as honeycombing) many overlapping patterns that need to be considered for differential diagnosis are also included in the scheme.

Obtaining Your License: Careers in Real Estate.

ERIC Educational Resources Information Center

Lyon, Robert

Two steps are required to obtain a real estate salesperson's license in Texas: (1) selecting a broker to serve as an advisor, and (2) meeting personal requirements (at least 18 years old, a Texas resident, completion of a minimum of 12 semester hours of real estate and related courses, application, acceptable score on state exam, and payment of…

[Poverty and Health: The Living Standard Approach as a Supplementary Concept to Measure Relative Poverty. Results from the German Socio-Economic Panel (GSOEP 2011)].

PubMed

Pförtner, T-K

2016-06-01

A common indicator of the measurement of relative poverty is the disposable income of a household. Current research introduces the living standard approach as an alternative concept for describing and measuring relative poverty. This study compares both approaches with regard to subjective health status of the German population, and provides theoretical implications for the utilisation of the income and living standard approach in health research. Analyses are based on the German Socio-Economic Panel (GSOEP) from the year 2011 that includes 12 290 private households and 21106 survey members. Self-rated health was based on a subjective assessment of general health status. Income poverty is based on the equalised disposable income and is applied to a threshold of 60% of the median-based average income. A person will be denoted as deprived (inadequate living standard) if 3 or more out of 11 living standard items are lacking due to financial reasons. To calculate the discriminate power of both poverty indicators, descriptive analyses and stepwise logistic regression models were applied separately for men and women adjusted for age, residence, nationality, educational level, occupational status and marital status. The results of the stepwise regression revealed a stronger poverty-health relationship for the living standard indicator. After adjusting for all control variables and the respective poverty indicator, income poverty was statistically not significantly associated with a poor subjective health status among men (OR Men: 1.33; 95% CI: 1.00-1.77) and women (OR Women: 0.98; 95% CI: 0.78-1.22). In contrast, the association between deprivation and subjective health status was statistically significant for men (OR Men: 2.00; 95% CI: 1.57-2.52) and women (OR Women: 2.11; 95% CI: 1.76-2.64). The results of the present study indicate that the income and standard of living approach measure different dimensions of poverty. In comparison to the income approach, the living

Role of the standard deviation in the estimation of benchmark doses with continuous data.

PubMed

Gaylor, David W; Slikker, William

2004-12-01

For continuous data, risk is defined here as the proportion of animals with values above a large percentile, e.g., the 99th percentile or below the 1st percentile, for the distribution of values among control animals. It is known that reducing the standard deviation of measurements through improved experimental techniques will result in less stringent (higher) doses for the lower confidence limit on the benchmark dose that is estimated to produce a specified risk of animals with abnormal levels for a biological effect. Thus, a somewhat larger (less stringent) lower confidence limit is obtained that may be used as a point of departure for low-dose risk assessment. It is shown in this article that it is important for the benchmark dose to be based primarily on the standard deviation among animals, s(a), apart from the standard deviation of measurement errors, s(m), within animals. If the benchmark dose is incorrectly based on the overall standard deviation among average values for animals, which includes measurement error variation, the benchmark dose will be overestimated and the risk will be underestimated. The bias increases as s(m) increases relative to s(a). The bias is relatively small if s(m) is less than one-third of s(a), a condition achieved in most experimental designs.

The best choice of equipment to obtain high quality standardised results in intra-oral photography - a comparison between the common practice in the UK and the gold standard set by the literature.

PubMed

Marcato, Laura; Sandler, Jonathan

2018-04-01

Since digital technology made dental photography widely available, photographers have been trying to establish the 'gold standard' when obtaining intra-oral photographs. A basic knowledge of photographic principles, familiarity with particular dental techniques and a correct choice and use of equipment contribute significantly both to the standardisation and quality of photographs. A recent survey between members of the Institute of Medical Illustrators shed a light on the current practice in the UK. Medical photographers do not always have access to the full range of suitable equipment. A better selection of retractors and occlusal mirrors would undoubtedly contribute to higher quality images.

Lack of robustness of textural measures obtained from 3D brain tumor MRIs impose a need for standardization.

PubMed

Molina, David; Pérez-Beteta, Julián; Martínez-González, Alicia; Martino, Juan; Velasquez, Carlos; Arana, Estanislao; Pérez-García, Víctor M

2017-01-01

Textural measures have been widely explored as imaging biomarkers in cancer. However, their robustness under dynamic range and spatial resolution changes in brain 3D magnetic resonance images (MRI) has not been assessed. The aim of this work was to study potential variations of textural measures due to changes in MRI protocols. Twenty patients harboring glioblastoma with pretreatment 3D T1-weighted MRIs were included in the study. Four different spatial resolution combinations and three dynamic ranges were studied for each patient. Sixteen three-dimensional textural heterogeneity measures were computed for each patient and configuration including co-occurrence matrices (CM) features and run-length matrices (RLM) features. The coefficient of variation was used to assess the robustness of the measures in two series of experiments corresponding to (i) changing the dynamic range and (ii) changing the matrix size. No textural measures were robust under dynamic range changes. Entropy was the only textural feature robust under spatial resolution changes (coefficient of variation under 10% in all cases). Textural measures of three-dimensional brain tumor images are not robust neither under dynamic range nor under matrix size changes. Standards should be harmonized to use textural features as imaging biomarkers in radiomic-based studies. The implications of this work go beyond the specific tumor type studied here and pose the need for standardization in textural feature calculation of oncological images.

Spectral irradiance standard for the ultraviolet - The deuterium lamp

NASA Technical Reports Server (NTRS)

Saunders, R. D.; Ott, W. R.; Bridges, J. M.

1978-01-01

A set of deuterium lamps is calibrated as spectral irradiance standards in the 200-350-nm spectral region utilizing both a high accuracy tungsten spectral irradiance standard and a newly developed argon mini-arc spectral radiance standard. The method which enables a transfer from a spectral radiance to a spectral irradiance standard is described. The following characteristics of the deuterium lamp irradiance standard are determined: sensitivity to alignment; dependence on input power and solid angle; reproducibility; and stability. The absolute spectral radiance is also measured in the 167-330-nm region. Based upon these measurements, values of the spectral irradiance below 200 nm are obtained through extrapolation.

Programmable, secondary frequency standard based infrared synthesizer using tunable lead-salt diode lasers

NASA Technical Reports Server (NTRS)

Freed, C.; Bielinski, J. W.; Lo, W.

1983-01-01

Quantum phase noise limited Lorentzian power spectral densities were achieved with tunable lead-salt diode lasers. Linewidths as narrow as 22 kHz were observed. A truly programmable infrared synthesizer was produced by frequency-offset-locking the tunable diode lasers to the combination of a stable CO2 (or CO) reference laser and a programmable microwave frequency synthesizer. Absolute frequency accuracy and reproducibility of about + or - 30 kHz (0.000001 kaysers) relative to the primary Cs frequency standard may now be obtained with this technique.

Evaluation of marginal and internal gaps of metal ceramic crowns obtained from conventional impressions and casting techniques with those obtained from digital techniques.

PubMed

Rai, Rathika; Kumar, S Arun; Prabhu, R; Govindan, Ranjani Thillai; Tanveer, Faiz Mohamed

2017-01-01

Accuracy in fit of cast metal restoration has always remained as one of the primary factors in determining the success of the restoration. A well-fitting restoration needs to be accurate both along its margin and with regard to its internal surface. The aim of the study is to evaluate the marginal fit of metal ceramic crowns obtained by conventional inlay casting wax pattern using conventional impression with the metal ceramic crowns obtained by computer-aided design and computer-aided manufacturing (CAD/CAM) technique using direct and indirect optical scanning. This in vitro study on preformed custom-made stainless steel models with former assembly that resembles prepared tooth surfaces of standardized dimensions comprised three groups: the first group included ten samples of metal ceramic crowns fabricated with conventional technique, the second group included CAD/CAM-milled direct metal laser sintering (DMLS) crowns using indirect scanning, and the third group included DMLS crowns fabricated by direct scanning of the stainless steel model. The vertical marginal gap and the internal gap were evaluated with the stereomicroscope (Zoomstar 4); post hoc Turkey's test was used for statistical analysis. One-way analysis of variance method was used to compare the mean values. Metal ceramic crowns obtained from direct optical scanning showed the least marginal and internal gap when compared to the castings obtained from inlay casting wax and indirect optical scanning. Indirect and direct optical scanning had yielded results within clinically acceptable range.

77 FR 50757 - Charging Standard Administrative Fees for Nonprogram-Related Information

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

..., call our national toll-free number, 1-800-772-1213 or TTY 1-800-325-0778, or visit our Internet site... purposes. We will require advance payment of the standard fee by check, money order, or credit card. We...

45 CFR 156.110 - EHB-benchmark plan standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

....110 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES... newborn care. (5) Mental health and substance use disorder services, including behavioral health treatment...

45 CFR 156.110 - EHB-benchmark plan standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

....110 Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES... newborn care. (5) Mental health and substance use disorder services, including behavioral health treatment...

The Chinese-Western Intercultural Couple Standards Scale.

PubMed

Hiew, Danika N; Halford, W Kim; van de Vijver, Fons J R; Liu, Shuang

2015-09-01

We developed the Chinese-Western Intercultural Couple Standards Scale (CWICSS) to assess relationship standards that may differ between Chinese and Western partners and may challenge intercultural couples. The scale assesses 4 Western-derived relationship standards (demonstrations of love, demonstrations of caring, intimacy expression, and intimacy responsiveness) and 4 Chinese-derived relationship standards (relations with the extended family, relational harmony, face, and gender roles). We administered the CWICSS to 983 Chinese and Western participants living in Australia to assess the psychometric properties of the scores as measures of respondents' relationship standards. The CWICSS has a 2-level factor structure with the items reflecting the 8 predicted standards. The 4 Western derived standards loaded onto a higher order factor of couple bond, and the 4 Chinese derived standards loaded onto a higher order factor of family responsibility. The scale scores were structurally equivalent across cultures, genders, and 2 independent samples, and good convergent and discriminant validity was found for the interpretation of scale scores as respondents' endorsement of the predicted standards. Scores on the 8 scales and 2 superordinate scales showed high internal consistency and test-retest coefficients. Chinese endorsed all 4 family responsibility standards more strongly than did Westerners, but Chinese and Western participants were similar in endorsement of couple bond standards. Across both cultures, couple bond standards were endorsed more highly than were family responsibility standards. The CWICSS assesses potential areas of conflict in Chinese-Western relationships. (c) 2015 APA, all rights reserved.

Cytometry standards continuum

NASA Astrophysics Data System (ADS)

Leif, Robert C.; Spidlen, Josef; Brinkman, Ryan R.

2008-02-01

Introduction: The International Society for Analytical Cytology, ISAC, is developing a new combined flow and image Analytical Cytometry Standard (ACS). This standard needs to serve both the research and clinical communities. The clinical medicine and clinical research communities have a need to exchange information with hospital and other clinical information systems. Methods: 1) Prototype the standard by creating CytometryML and a RAW format for binary data. 2) Join the ISAC Data Standards Task Force. 3) Create essential project documentation. 4) Cooperate with other groups by assisting in the preparation of the DICOM Supplement 122: Specimen Module and Pathology Service-Object Pair Classes. Results: CytometryML has been created and serves as a prototype and source of experience for the following: the Analytical Cytometry Standard (ACS) 1.0, the ACS container, Minimum Information about a Flow Cytometry Experiment (MIFlowCyt), and Requirements for a Data File Standard Format to Describe Flow Cytometry and Related Analytical Cytology Data. These requirements provide a means to judge the appropriateness of design elements and to develop tests for the final ACS. The requirements include providing the information required for understanding and reproducing a cytometry experiment or clinical measurement, and for a single standard for both flow and digital microscopic cytometry. Schemas proposed by other members of the ISAC Data Standards Task Force (e.g, Gating-ML) have been independently validated and have been integrated with CytometryML. The use of netCDF as an element of the ACS container has been proposed by others and a suggested method of its use is proposed.

The Meaning of Curriculum-Related Examination Standards in Scotland and England: A Home-International Comparison

ERIC Educational Resources Information Center

Baird, Jo-Anne; Gray, Lena

2016-01-01

The ways in which examination standards are conceptualised and operationalised differently across nations has not been given sufficient attention. The international literature on standard-setting has been dominated by the psychometrics tradition. Broader conceptualisations of examination standards have been discussed in the literature in England,…

Tools, harmonization and standardization procedures of the impact and outcome evaluation indices obtained during a kindergarten-based, family-involved intervention to prevent obesity in early childhood: the ToyBox-study.

PubMed

Mouratidou, T; Miguel, M L; Androutsos, O; Manios, Y; De Bourdeaudhuij, I; Cardon, G; Kulaga, Z; Socha, P; Galcheva, S; Iotova, V; Payr, A; Koletzko, B; Moreno, L A

2014-08-01

The ToyBox-intervention is a kindergarten-based, family-involved intervention targeting multiple lifestyle behaviours in preschool children, their teachers and their families. This intervention was conducted in six European countries, namely Belgium, Bulgaria, Germany, Greece, Poland and Spain. The aim of this paper is to provide a descriptive overview of the harmonization and standardization procedures of the baseline and follow-up evaluation of the study (and substudies). Steps related to the study's operational, standardization and harmonization procedures as well as the impact and outcome evaluation assessment tools used are presented. Experiences from the project highlight the importance of safeguarding the measurement process to minimize data heterogeneity derived from potential measurement error and country-by-country differences. In addition, it was made clear that continuing quality control and support is an important component of such studies. For this reason, well-supported communication channels, such as regular email updates and teleconferences, and regular internal and external meetings to ensure smooth and accurate implementation were in place during the study. The ToyBox-intervention and its harmonized and standardized procedures can serve as a successful case study for future studies evaluating the efficacy of similar interventions. © 2014 World Obesity.

45 CFR 153.540 - Compliance with risk corridors standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Section 153.540 Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS STANDARDS RELATED TO REINSURANCE, RISK CORRIDORS, AND RISK ADJUSTMENT UNDER THE AFFORDABLE CARE ACT Health Insurance Issuer Standards Related to the Risk Corridors Program § 153.540 Compliance...

Standards Draw Heat in States

ERIC Educational Resources Information Center

Ujifusa, Andrew

2013-01-01

Opponents of the Common Core State Standards are ramping up legislative pressure and public relations efforts aimed at getting states to scale back--or even abandon--the high-profile initiative, even as implementation proceeds and tests aligned with the standards loom. Critics of the common core have focused recent lobbying and media efforts on…

National Center for Standards and Certification Information: Service and programs

NASA Technical Reports Server (NTRS)

Overman, Joanne

1994-01-01

The National Center for Standards and Certification Information (NCSCI) provides information on U.S., foreign and international voluntary standards, government regulations, and conformity assessment procedures for non-agricultural products. The Center serves as a referral service and focal point in the United States for information on standards and standards-related information. NCSCI staff respond to inquiries, maintain a reference collection of standards and standards-related documents, and serve as the U.S. inquiry point for information to and from foreign countries.

Standardization approaches in absolute quantitative proteomics with mass spectrometry.

PubMed

Calderón-Celis, Francisco; Encinar, Jorge Ruiz; Sanz-Medel, Alfredo

2017-07-31

Mass spectrometry-based approaches have enabled important breakthroughs in quantitative proteomics in the last decades. This development is reflected in the better quantitative assessment of protein levels as well as to understand post-translational modifications and protein complexes and networks. Nowadays, the focus of quantitative proteomics shifted from the relative determination of proteins (ie, differential expression between two or more cellular states) to absolute quantity determination, required for a more-thorough characterization of biological models and comprehension of the proteome dynamism, as well as for the search and validation of novel protein biomarkers. However, the physico-chemical environment of the analyte species affects strongly the ionization efficiency in most mass spectrometry (MS) types, which thereby require the use of specially designed standardization approaches to provide absolute quantifications. Most common of such approaches nowadays include (i) the use of stable isotope-labeled peptide standards, isotopologues to the target proteotypic peptides expected after tryptic digestion of the target protein; (ii) use of stable isotope-labeled protein standards to compensate for sample preparation, sample loss, and proteolysis steps; (iii) isobaric reagents, which after fragmentation in the MS/MS analysis provide a final detectable mass shift, can be used to tag both analyte and standard samples; (iv) label-free approaches in which the absolute quantitative data are not obtained through the use of any kind of labeling, but from computational normalization of the raw data and adequate standards; (v) elemental mass spectrometry-based workflows able to provide directly absolute quantification of peptides/proteins that contain an ICP-detectable element. A critical insight from the Analytical Chemistry perspective of the different standardization approaches and their combinations used so far for absolute quantitative MS-based (molecular and

77 FR 49489 - Oil and Natural Gas Sector: New Source Performance Standards and National Emission Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-16

...This action finalizes the review of new source performance standards for the listed oil and natural gas source category. In this action the EPA revised the new source performance standards for volatile organic compounds from leaking components at onshore natural gas processing plants and new source performance standards for sulfur dioxide emissions from natural gas processing plants. The EPA also established standards for certain oil and gas operations not covered by the existing standards. In addition to the operations covered by the existing standards, the newly established standards will regulate volatile organic compound emissions from gas wells, centrifugal compressors, reciprocating compressors, pneumatic controllers and storage vessels. This action also finalizes the residual risk and technology review for the Oil and Natural Gas Production source category and the Natural Gas Transmission and Storage source category. This action includes revisions to the existing leak detection and repair requirements. In addition, the EPA has established in this action emission limits reflecting maximum achievable control technology for certain currently uncontrolled emission sources in these source categories. This action also includes modification and addition of testing and monitoring and related notification, recordkeeping and reporting requirements, as well as other minor technical revisions to the national emission standards for hazardous air pollutants. This action finalizes revisions to the regulatory provisions related to emissions during periods of startup, shutdown and malfunction.

Third International Standard for Posterior Pituitary

PubMed Central

Bangham, D. R.; Mussett, Marjorie V.

1958-01-01

In October 1955, stocks of the Second International Standard for Posterior Pituitary were running low and the Department of Biological Standards of the National Institute for Medical Research, London, was asked to proceed with the arrangements for an international collaborative assay of material for the Third Standard. A single 142-g batch of posterior-pituitary-lobe powder was obtained and distributed in ampoules, in approximately 30-mg quantities. Samples were sent to 19 laboratories in 10 countries. In all, 185 assays were carried out, 122 for oxytocic activity, 53 for vasopressor activity and 10 for antidiuretic activity. On the basis of the results, which were analysed statistically at the National Institute for Medical Research, it was agreed that the potency of the Third Standard (re-named International Standard for Oxytocic, Vasopressor and Antidiuretic Substances in 1956, in view of the recent synthesis of oxytocin and vasopressin) should be expressed as 2.0 International Units per milligram. The International Unit therefore remains unchanged as 0.5 mg of the dry powder. PMID:13585079

22 CFR 226.40 - Purpose of procurement standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Purpose of procurement standards. 226.40 Section 226.40 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Procurement Standards § 226.40 Purpose...

Asbestos: Rationale Behind a Proposed Air Quality Standard

ERIC Educational Resources Information Center

Bruckman, Leonard; Rubino, Robert A.

1975-01-01

This article proposes an asbestos air quality standard for Connecticut lower than proposed Federal regulation. Data are given relating mesothelioma incidence to occupational and non-occupational asbestos exposure. New standards lower asbestos emissions from manufacturing operations thus reducing possible asbestos-related fatalities. Rebuttals and…

49 CFR 531.5 - Fuel economy standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Fuel economy standards. 531.5 Section 531.5 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER AUTOMOBILE AVERAGE FUEL ECONOMY STANDARDS § 531.5 Fuel economy standards. (a) Except as provided...

Isolating DNA from sexual assault cases: a comparison of standard methods with a nuclease-based approach

PubMed Central

2012-01-01

Background Profiling sperm DNA present on vaginal swabs taken from rape victims often contributes to identifying and incarcerating rapists. Large amounts of the victim’s epithelial cells contaminate the sperm present on swabs, however, and complicate this process. The standard method for obtaining relatively pure sperm DNA from a vaginal swab is to digest the epithelial cells with Proteinase K in order to solubilize the victim’s DNA, and to then physically separate the soluble DNA from the intact sperm by pelleting the sperm, removing the victim’s fraction, and repeatedly washing the sperm pellet. An alternative approach that does not require washing steps is to digest with Proteinase K, pellet the sperm, remove the victim’s fraction, and then digest the residual victim’s DNA with a nuclease. Methods The nuclease approach has been commercialized in a product, the Erase Sperm Isolation Kit (PTC Labs, Columbia, MO, USA), and five crime laboratories have tested it on semen-spiked female buccal swabs in a direct comparison with their standard methods. Comparisons have also been performed on timed post-coital vaginal swabs and evidence collected from sexual assault cases. Results For the semen-spiked buccal swabs, Erase outperformed the standard methods in all five laboratories and in most cases was able to provide a clean male profile from buccal swabs spiked with only 1,500 sperm. The vaginal swabs taken after consensual sex and the evidence collected from rape victims showed a similar pattern of Erase providing superior profiles. Conclusions In all samples tested, STR profiles of the male DNA fractions obtained with Erase were as good as or better than those obtained using the standard methods. PMID:23211019

45 CFR 156.340 - Standards for downstream and delegated entities.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... 156.340 Section 156.340 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Federally-Facilitated Exchange Qualified Health Plan Issuer Standards § 156...

45 CFR 156.340 - Standards for downstream and delegated entities.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... 156.340 Section 156.340 Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS HEALTH INSURANCE ISSUER STANDARDS UNDER THE AFFORDABLE CARE ACT, INCLUDING STANDARDS RELATED TO EXCHANGES Federally-Facilitated Exchange Qualified Health Plan Issuer Standards § 156...

[Comparison and Discussion of National/Military Standards Related to Flow Measurement of Medical Injection Pump].

PubMed

Zhang, Nan; Zhou, Juan; Yu, Jinlai; Hua, Ziyu; Li, Yongxue; Wu, Jiangang

2018-05-30

Medical injection pump is a commonly used clinical equipment with high risk. Accurate detection of flow is an important aspect to ensure its reliable operation. In this paper, we carefully studied and analyzed the flow detection methods of three standards being used in medical injection pump detection in our country. The three standards were compared from the aspects of standard device, flow test point selection, length of test time and accuracy judgment. The advantages and disadvantages of these standards were analyzed and suggestions for improvement were put forward.

Bringing Standardized Processes in Atom-Probe Tomography: I Establishing Standardized Terminology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Ian M; Danoix, F; Forbes, Richard

2011-01-01

Defining standardized methods requires careful consideration of the entire field and its applications. The International Field Emission Society (IFES) has elected a Standards Committee, whose task is to determine the needed steps to establish atom-probe tomography as an accepted metrology technique. Specific tasks include developing protocols or standards for: terminology and nomenclature; metrology and instrumentation, including specifications for reference materials; test methodologies; modeling and simulations; and science-based health, safety, and environmental practices. The Committee is currently working on defining terminology related to atom-probe tomography with the goal to include terms into a document published by the International Organization for Standardsmore » (ISO). A lot of terms also used in other disciplines have already been defined) and will be discussed for adoption in the context of atom-probe tomography.« less

A Cesium fountain frequency standard: Preliminary results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clairon, A.; Laurent, P.; Santarelli, G.

1994-12-31

Laser cooling of atoms has opened up new possibilities in the field of atomic frequency standards. A Cesium atomic fountain, first proposed by Zacharias in 1953, is now feasible: the atoms, first cooled by six laser beams, are launched upward using laser light, pass once through a microwave cavity, continue their ballistic flight and then fall through the same cavity. The long time between the two microwave interactions leads to a Ramsey resonance much narrower than in conventional Cs clocks using thermal atomic beams. The stability and accuracy of such a cesium fountain am very attractive. The use of diodemore » lasers to cool, launch and detect cesium atoms in a low cesium pressure cell allows the construction of a simple and reliable atomic fountain frequency standard. A fountain frequency standard is now in operation at LPTF. A Ramsey resonance as narrow as 0.8 Hz has been obtained. A few days of continuous operation are routinely obtained. In closed loop operation the fountain frequency standard is continuously monitored against a H maser allowing an evaluation of the accuracy of the device. The present short- term frequency stability is about 5.10{sup -13} {tau}{sup -1/2} limited only by the frequency noise of the microwave source. We intend to present a preliminary evaluation of this new standard with a discussion of the major systematic effects which determine the accuracy. The expected accuracy will be at 10-14 level. In addition, we will present a description of the whole design of the cesium fountain.« less

A pilot study of reference vibrotactile perception thresholds on the fingertip obtained with Malaysian healthy people using ISO 13091-1 equipment.

PubMed

Daud, Roshada; Maeda, Setsuo; Kameel, Nur Nazmin Mustafa; Ripin, Muhamad Yunus; Bakrun, Norazman; Md Zein, Raemy; Kido, Masaharu; Higuchi, Kiyotaka

2004-04-01

The purpose of this paper is to clarify the reference vibrotactile perception thresholds (VPT) for healthy people in Malaysia. The measurement equipment standard, ISO 13091-1, of the vibrotactile perception thresholds for the assessment of nerve dysfunction and the analysis and interpretation of measurements at the fingertips standard, ISO 13091-2, were published in ISO/TC108/SC4/WG8 on 2001 and 2003 individually. In the ISO 13091-2 standard, the reference VPT data were obtained from few research papers. Malaysian people's VPT data don't include to this standard. In Malaysia, when the VPT is using to diagnose of the hand-arm vibration syndrome, the reference VPT data need to compare with the worker's ones. But, Malaysia does not have the reference VPT data yet. So, in this paper, the VPT was measured by using ISO 13091-1 standard equipment to obtain the reference data for Malaysian people. And these data were compared with the ISO reference data on the ISO 13091-2 standard. From the comparison of these data, it was clear that the Malaysian healthy people's VPT data were consistent with the reference data of the ISO 13091-2 standard.

Cancer-related Concerns of Spouses of Women with Breast Cancer

PubMed Central

Fletcher, Kristin A.; Lewis, Frances Marcus; Haberman, Mel R.

2009-01-01

Objective To describe spouses' reported cancer-related demands attributed to their wife's breast cancer and to test the construct and predictive validity of a brief standardized measure of these demands. Methods Cross-sectional and longitudinal data were obtained from 151 spouses of women newly diagnosed with non-metastatic breast cancer. Descriptive statistics were computed to describe spouses' dominant cancer-related demands and multivariate regression analyses tested the construct and predictive validity of the standardized measure. Results Five categories of spouses' cancer-related demands were identified, such as concerns about: spouses' own functioning; wife's well being and response to treatment; couples' sexual activities; the family's and children's well-being; and the spouses' role in supporting their wives. A 33-item short version of the standardized measure of cancer demands demonstrated construct and predictive validity that was comparable to a 123-item version of the same questionnaire. Greater numbers of illness demands occurred when spouses were more depressed and had less confidence in their ability to manage the impact of the cancer (F=18.08 (3, 103), p<.001). Predictive validity was established by the short form's ability to significantly predict the quality of marital communication and spouses' self-efficacy at a two-month interval. Conclusion The short-version of the standardized measure of cancer-related demands shows promise for future application in clinic settings. Additional testing of the questionnaire is warranted. Spouses' breast cancer-related demands deserve attention by providers. In the absence of assisting them, spouses' illness pressures have deleterious consequences for the quality of marital communication and spouses' self-confidence. PMID:20014184

22 CFR 226.30 - Purpose of property standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Purpose of property standards. 226.30 Section 226.30 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Property Standards § 226.30 Purpose of...

76 FR 35791 - Prudential Management and Operations Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

... FEDERAL HOUSING FINANCE AGENCY 12 CFR Part 1236 RIN 2590-AA13 Prudential Management and Operations... (FHFA) to establish prudential standards relating to the management and operations of the Federal... to establish standards that address 10 separate areas relating to the management and operation of the...

Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

Lack of robustness of textural measures obtained from 3D brain tumor MRIs impose a need for standardization

PubMed Central

Pérez-Beteta, Julián; Martínez-González, Alicia; Martino, Juan; Velasquez, Carlos; Arana, Estanislao; Pérez-García, Víctor M.

2017-01-01

Purpose Textural measures have been widely explored as imaging biomarkers in cancer. However, their robustness under dynamic range and spatial resolution changes in brain 3D magnetic resonance images (MRI) has not been assessed. The aim of this work was to study potential variations of textural measures due to changes in MRI protocols. Materials and methods Twenty patients harboring glioblastoma with pretreatment 3D T1-weighted MRIs were included in the study. Four different spatial resolution combinations and three dynamic ranges were studied for each patient. Sixteen three-dimensional textural heterogeneity measures were computed for each patient and configuration including co-occurrence matrices (CM) features and run-length matrices (RLM) features. The coefficient of variation was used to assess the robustness of the measures in two series of experiments corresponding to (i) changing the dynamic range and (ii) changing the matrix size. Results No textural measures were robust under dynamic range changes. Entropy was the only textural feature robust under spatial resolution changes (coefficient of variation under 10% in all cases). Conclusion Textural measures of three-dimensional brain tumor images are not robust neither under dynamic range nor under matrix size changes. Standards should be harmonized to use textural features as imaging biomarkers in radiomic-based studies. The implications of this work go beyond the specific tumor type studied here and pose the need for standardization in textural feature calculation of oncological images. PMID:28586353

15 CFR 711.6 - Where to obtain forms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Where to obtain forms. 711.6 Section 711.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU... INFORMATION REGARDING DECLARATION, REPORTING, AND ADVANCE NOTIFICATION REQUIREMENTS, AND THE ELECTRONIC FILING...

77 FR 23159 - Locomotive Safety Standards; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-18

.... FRA-2009-0094 and FR-2009-0095, Notice No. 4] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards final rule is FRA... rule related to locomotive safety standards. See 77 FR 21312. The final rule established a public...

Nevada Academic Standards in the Arts: Music.

ERIC Educational Resources Information Center

Nevada State Dept. of Education, Carson City.

Nevada's nine academic standards in music education call for specific educational outcomes in grades 3 and 5, as well as in middle school and secondary school. Nevada's standards relate to singing, playing instruments, listening to music, writing and reading music, and cultural and historical connections in music. The standards present performance…

The relation between peak response magnitudes and agreement in diagnoses obtained from two different phallometric tests for pedophilia.

PubMed

Lykins, Amy D; Cantor, James M; Kuban, Michael E; Blak, Thomas; Dickey, Robert; Klassen, Philip E; Blanchard, Ray

2010-03-01

Phallometric testing is widely considered the best psychophysiological procedure for assessing erotic preferences in men. Researchers have differed, however, on the necessity of setting some minimum criterion of penile response for ascertaining the interpretability of a phallometric test result. Proponents of a minimum criterion have generally based their view on the intuitive notion that "more is better" rather than any formal demonstration of this. The present study was conducted to investigate whether there is any empirical evidence for this intuitive notion, by examining the relation between magnitude of penile response and the agreement in diagnoses obtained in two test sessions using different laboratory stimuli. The results showed that examinees with inconsistent diagnoses responded less on both tests and that examinees with inconsistent diagnoses responded less on the second test after controlling for their response on the first test. Results also indicated that at response levels less than 1 cm(3), diagnostic consistency was no better than chance, supporting the establishment of a minimum response level criterion.

Specifications of Standards in Systems and Synthetic Biology.

PubMed

Schreiber, Falk; Bader, Gary D; Golebiewski, Martin; Hucka, Michael; Kormeier, Benjamin; Le Novère, Nicolas; Myers, Chris; Nickerson, David; Sommer, Björn; Waltemath, Dagmar; Weise, Stephan

2015-09-04

Standards shape our everyday life. From nuts and bolts to electronic devices and technological processes, standardised products and processes are all around us. Standards have technological and economic benefits, such as making information exchange, production, and services more efficient. However, novel, innovative areas often either lack proper standards, or documents about standards in these areas are not available from a centralised platform or formal body (such as the International Standardisation Organisation). Systems and synthetic biology is a relatively novel area, and it is only in the last decade that the standardisation of data, information, and models related to systems and synthetic biology has become a community-wide effort. Several open standards have been established and are under continuous development as a community initiative. COMBINE, the ‘COmputational Modeling in BIology’ NEtwork has been established as an umbrella initiative to coordinate and promote the development of the various community standards and formats for computational models. There are yearly two meeting, HARMONY (Hackathons on Resources for Modeling in Biology), Hackathon-type meetings with a focus on development of the support for standards, and COMBINE forums, workshop-style events with oral presentations, discussion, poster, and breakout sessions for further developing the standards. For more information see http://co.mbine.org/. So far the different standards were published and made accessible through the standards’ web- pages or preprint services. The aim of this special issue is to provide a single, easily accessible and citable platform for the publication of standards in systems and synthetic biology. This special issue is intended to serve as a central access point to standards and related initiatives in systems and synthetic biology, it will be published annually to provide an opportunity for standard development groups to communicate updated

76 FR 45647 - Consensus Standards, Light-Sport Aircraft

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Consensus Standards, Light-Sport... previously accepted consensus standards relating to the provisions of the Sport Pilot and Light-Sport... Light Sport Aircraft developed the revised standards with Federal Aviation Administration (FAA...

Optimization and standardization of pavement management processes.

DOT National Transportation Integrated Search

2004-08-01

This report addresses issues related to optimization and standardization of current pavement management processes in Kentucky. Historical pavement management records were analyzed, which indicates that standardization is necessary in future pavement ...

European standardization effort: interworking the goal

NASA Astrophysics Data System (ADS)

Mattheus, Rudy A.

1993-09-01

In the European Standardization Committee (CEN), the technical committee responsible for the standardization activities in Medical Informatics (CEN TC 251), has agreed upon the directions of the scopes to follow in this field. They are described in the Directory of the European Standardization Requirements for Healthcare Informatics and Programme for the Development of Standards adopted on 02-28-1991 by CEN/TC 251 and approved by CEN/BT. Top-down objectives describe the common framework and items like terminology, security, more bottom up oriented items describe fields like medical imaging and multi-media. The draft standard is described; the general framework model and object oriented model; the interworking aspects, the relation to ISO standards, and the DICOM proposal. This paper also focuses on all the boundaries in the standardization work, which are also influencing the standardization process.

Global transport in a nonautonomous periodic standard map

DOE PAGES

Calleja, Renato C.; del-Castillo-Negrete, D.; Martinez-del-Rio, D.; ...

2017-04-14

A non-autonomous version of the standard map with a periodic variation of the perturbation parameter is introduced and studied via an autonomous map obtained from the iteration of the nonautonomous map over a period. Symmetry properties in the variables and parameters of the map are found and used to find relations between rotation numbers of invariant sets. The role of the nonautonomous dynamics on period-one orbits, stability and bifurcation is studied. The critical boundaries for the global transport and for the destruction of invariant circles with fixed rotation number are studied in detail using direct computation and a continuation method.more » In the case of global transport, the critical boundary has a particular symmetrical horn shape. Here, the results are contrasted with similar calculations found in the literature.« less

Global transport in a nonautonomous periodic standard map

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calleja, Renato C.; del-Castillo-Negrete, D.; Martinez-del-Rio, D.

A non-autonomous version of the standard map with a periodic variation of the perturbation parameter is introduced and studied via an autonomous map obtained from the iteration of the nonautonomous map over a period. Symmetry properties in the variables and parameters of the map are found and used to find relations between rotation numbers of invariant sets. The role of the nonautonomous dynamics on period-one orbits, stability and bifurcation is studied. The critical boundaries for the global transport and for the destruction of invariant circles with fixed rotation number are studied in detail using direct computation and a continuation method.more » In the case of global transport, the critical boundary has a particular symmetrical horn shape. Here, the results are contrasted with similar calculations found in the literature.« less

45 CFR 164.306 - Security standards: General rules.

Code of Federal Regulations, 2012 CFR

2012-10-01

... RELATED REQUIREMENTS SECURITY AND PRIVACY Security Standards for the Protection of Electronic Protected Health Information § 164.306 Security standards: General rules. (a) General requirements. Covered... covered entity to reasonably and appropriately implement the standards and implementation specifications...

45 CFR 164.306 - Security standards: General rules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... RELATED REQUIREMENTS SECURITY AND PRIVACY Security Standards for the Protection of Electronic Protected Health Information § 164.306 Security standards: General rules. (a) General requirements. Covered... and appropriately implement the standards and implementation specifications as specified in this...

The Relation of White-on-White Standard Automated Perimetry, Short Wavelength Perimetry, and Optic Coherence Tomography Parameters in Ocular Hypertension.

PubMed

Başkan, Ceyda; Köz, Özlem G; Duman, Rahmi; Gökçe, Sabite E; Yarangümeli, Ahmet A; Kural, Gülcan

2016-12-01

The purpose of this study is to examine the demographics, clinical properties, and the relation between white-on-white standard automated perimetry (SAP), short wavelength automated perimetry (SWAP), and optical coherence tomographic (OCT) parameters of patients with ocular hypertension. Sixty-one eyes of 61 patients diagnosed with ocular hypertension in the Ankara Numune Education and Research Hospital ophthalmology unit between January 2010 and January 2011 were included in this study. All patients underwent SAP and SWAP tests with the Humphrey visual field analyser using the 30.2 full-threshold test. Retinal nerve fiber layers (RNFL) and optic nerve heads of patients were evaluated with Stratus OCT. Positive correlation was detected between SAP pattern standard deviation value and average intraocular pressure (P=0.017), maximum intraocular pressure (P=0.009), and vertical cup to disc (C/D) ratio (P=0.009). Positive correlation between SWAP median deviation value with inferior (P=0.032), nasal (P=0.005), 6 o'clock quadrant RNFL thickness (P=0.028), and Imax/Tavg ratio (P=0.023) and negative correlation with Smax/Navg ratio (P=0.005) were detected. There was no correlation between central corneal thickness and peripapillary RNFL thicknesses (P>0.05). There was no relation between SAP median deviation, pattern standard deviation values and RNFL thicknesses and optic disc parameters of the OCT. By contrast significant correlation between several SWAP parameters and OCT parameters were detected. SWAP appeared to outperform achromatic SAP when the same 30-2 method was used.

A "Common" Vision of Instruction? An Analysis of English/Language Arts Professional Development Materials Related to the Common Core State Standards

ERIC Educational Resources Information Center

Hodge, Emily; Benko, Susanna L.

2014-01-01

The purpose of this article is to describe the stances put forward by a selection of professional development resources interpreting the Common Core State Standards for English Language Arts (ELA) teachers, and to analyse where these resources stand in relation to research in ELA. Specifically, we analyse resources written by English educators…

40 CFR 1051.620 - When may a manufacturer obtain an exemption for competition recreational vehicles?

Code of Federal Regulations, 2010 CFR

2010-07-01

... exemption for competition recreational vehicles? 1051.620 Section 1051.620 Protection of Environment... ENGINES AND VEHICLES Compliance Provisions § 1051.620 When may a manufacturer obtain an exemption for competition recreational vehicles? (a) We may grant you an exemption from the standards and requirements of...

Comparing Teachers' Literacy-Related Knowledge to Their State's Standards for Reading

ERIC Educational Resources Information Center

McCombes-Tolis, Jule; Feinn, Richard

2008-01-01

This study compared elementary and special education teachers' knowledge of when K-3 students develop key reading competencies, their knowledge of who is responsible for teaching K-3 students key reading competencies, and teachers' perceptions of their own instructionally relevant competencies to those standards articulated within their state's…

Estimating standard errors in feature network models.

PubMed

Frank, Laurence E; Heiser, Willem J

2007-05-01

Feature network models are graphical structures that represent proximity data in a discrete space while using the same formalism that is the basis of least squares methods employed in multidimensional scaling. Existing methods to derive a network model from empirical data only give the best-fitting network and yield no standard errors for the parameter estimates. The additivity properties of networks make it possible to consider the model as a univariate (multiple) linear regression problem with positivity restrictions on the parameters. In the present study, both theoretical and empirical standard errors are obtained for the constrained regression parameters of a network model with known features. The performance of both types of standard error is evaluated using Monte Carlo techniques.

Evaluation of random errors in Williams’ series coefficients obtained with digital image correlation

NASA Astrophysics Data System (ADS)

Lychak, Oleh V.; Holyns'kiy, Ivan S.

2016-03-01

The use of the Williams’ series parameters for fracture analysis requires valid information about their error values. The aim of this investigation is the development of the method for estimation of the standard deviation of random errors of the Williams’ series parameters, obtained from the measured components of the stress field. Also, the criteria for choosing the optimal number of terms in the truncated Williams’ series for derivation of their parameters with minimal errors is proposed. The method was used for the evaluation of the Williams’ parameters, obtained from the data, and measured by the digital image correlation technique for testing a three-point bending specimen.

Compensation for Asbestos-Related Diseases in Japan: Utilization of Standard Classifications of Industry and Occupations

PubMed

Sawanyawisuth, Kittisak; Furuya, Sugio; Park, Eun-Kee; Myong, Jun-Pyo; Ramos-Bonilla, Juan Pablo; Chimed Ochir, Odgerel; Takahashi, Ken

2017-07-27

Background: Asbestos-related diseases (ARD) are occupational hazards with high mortality rates. To identify asbestos exposure by previous occupation is the main issue for ARD compensation for workers. This study aimed to identify risk groups by applying standard classifications of industries and occupations to a national database of compensated ARD victims in Japan. Methods: We identified occupations that carry a risk of asbestos exposure according to the International Standard Industrial Classification of All Economic Activities (ISIC). ARD compensation data from Japan between 2006 and 2013 were retrieved. Each compensated worker was classified by job section and group according to the ISIC code. Risk ratios for compensation were calculated according to the percentage of workers compensated because of ARD in each ISIC category. Results: In total, there were 6,916 workers with ARD who received compensation in Japan between 2008 and 2013. ISIC classification section F (construction) had the highest compensated risk ratio of 6.3. Section C (manufacturing) and section F (construction) had the largest number of compensated workers (2,868 and 3,463, respectively). In the manufacturing section C, 9 out of 13 divisions had a risk ratio of more than 1. For ISIC divisions in the construction section, construction of buildings (division 41) had the highest number of workers registering claims (2,504). Conclusion: ISIC classification of occupations that are at risk of developing ARD can be used to identify the actual risk of workers’ compensation at the national level. Creative Commons Attribution License

Standardization of domestic frying processes by an engineering approach.

PubMed

Franke, K; Strijowski, U

2011-05-01

An approach was developed to enable a better standardization of domestic frying of potato products. For this purpose, 5 domestic fryers differing in heating power and oil capacity were used. A very defined frying process using a highly standardized model product and a broad range of frying conditions was carried out in these fryers and the development of browning representing an important quality parameter was measured. Product-to-oil ratio, oil temperature, and frying time were varied. Quite different color changes were measured in the different fryers although the same frying process parameters were applied. The specific energy consumption for water evaporation (spECWE) during frying related to product amount was determined for all frying processes to define an engineering parameter for characterizing the frying process. A quasi-linear regression approach was applied to calculate this parameter from frying process settings and fryer properties. The high significance of the regression coefficients and a coefficient of determination close to unity confirmed the suitability of this approach. Based on this regression equation, curves for standard frying conditions (SFC curves) were calculated which describe the frying conditions required to obtain the same level of spECWE in the different domestic fryers. Comparison of browning results from the different fryers operated at conditions near the SFC curves confirmed the applicability of the approach. © 2011 Institute of Food Technologists®

In Vivo Detection of Choroidal Abnormalities Related to NF1: Feasibility and Comparison With Standard NIH Diagnostic Criteria in Pediatric Patients.

PubMed

Parrozzani, Raffaele; Clementi, Maurizio; Frizziero, Luisa; Miglionico, Giacomo; Perrini, Pierdavide; Cavarzeran, Fabiano; Kotsafti, Olympia; Comacchio, Francesco; Trevisson, Eva; Convento, Enrica; Fusetti, Stefano; Midena, Edoardo

2015-09-01

To evaluate the feasibility of near-infrared (NIR) imaging acquisition in a large sample of consecutive pediatric patients with neurofibromatosis type 1 (NF1), to evaluate the diagnostic performance of NF1-related choroidal abnormalities as a diagnostic criterion of the disease, and to compare this criterion with other standard National Institutes of Health (NIH) diagnostic criteria. A total of 140 consecutive pediatric patients (0-16 years old) affected by NF1 (at least two diagnostic criteria), 59 suspected (a single diagnostic criterion), and 42 healthy subjects (no diagnostic criterion) were consecutively included. Each patient underwent genetic, dermatologic, and ophthalmologic examination to evaluate the presence/absence of each NIH diagnostic criterion. The presence of NF1-related choroidal abnormalities was investigated using NIR confocal ophthalmoscopy. Two masked operators assessed Lisch nodules and NF1-related choroidal abnormalities. Neurofibromatosis type 1-related choroidal abnormalities were detected in 72 affected (60.5%) and 1 suspected (2.4%) child. No healthy subject had choroidal abnormalities. Feasibility rate of this sign was 82%. Sensitivity, specificity, and positive and negative predictive values of NF1-related choroidal abnormalities were 0.60, 0.97, 0.98, and 0.46, respectively. Compared with standard NIH criteria, the presence of NF1-related choroidal abnormalities was the third parameter for positive predictive value and the fourth for sensitivity, specificity, and negative predictive value. Compared with Lisch nodules, NF1-related choroidal abnormalities were characterized by higher specificity and positive predictive value. The interoperator agreement for Lisch nodules and NF1-related choroidal abnormalities was 0.67 (substantial) and 0.97 (almost perfect), respectively. The use of this sign moved one patient from the suspected to the affected group (0.5%). Neurofibromatosis type 1-related choroidal abnormalities represent a new

Assessment of the Adequacy of Instructional Resources in Business Education Programmes Relative to NCCE Standards for Colleges of Education in Nigeria

ERIC Educational Resources Information Center

Onyesom, Moses; Okolocha, Chimezie Comfort

2013-01-01

The study assessed the adequacy of instructional resources available for business education programmes at the colleges of education in Edo and Delta states of Nigeria in relation to the standards stipulated by the National Commission for Colleges of Education (NCCE). The study adopted the ex-post facto research design and was guided by five…

Toward a New Evaluation of Neutron Standards

DOE PAGES

Carlson, Allan D.; Pronyaev, Vladimir G.; Capote, Roberto; ...

2016-02-03

Measurements related to neutron cross section standards and certain prompt neutron fission spectra are being evaluated. In addition to the standard cross sections, investigations of reference data that are not as well known as the standards are being considered. We discuss procedures and codes for performing this work. A number of libraries will use the results of this standards evaluation for new versions of their libraries. Most of these data have applications in neutron dosimetry.

An Analysis of Geography Content in Relation to Geography for Life Standards in Oman

ERIC Educational Resources Information Center

Al-Nofli, Mohammed Abdullah

2018-01-01

Since the publication of "Geography for Life: National Geography Standards" in the United States (Geography Education Standards Project, 1994), it has been widely used to develop quality curriculum materials for what students should know and able to do in geography. This study compared geography content taught in Omani public schools…

The Effect of Standardized Interviews on Organ Donation.

PubMed

Corman Dincer, Pelin; Birtan, Deniz; Arslantas, Mustafa Kemal; Tore Altun, Gulbin; Ayanoglu, Hilmi Omer

2018-03-01

Organ donation is the most important stage for organ transplant. Studies reveal that attitudes of families of brain-dead patients toward donation play a significant role in their decision. We hypothesized that supporting family awareness about the meaning of organ donation, including saving lives while losing a loved one, combined with being informed about brain death and the donation process must be maintained by intensive care unit physicians through standardized interviews and questionnaires to increase the donation rate. We retrospectively evaluated the final decisions of families of 52 brain-dead donors treated at our institution between 2014 and 2017. Data underwent descriptive analyses. The standard interview content was generated after literature search results were reviewed by the authors. Previously, we examined the impact of standardized interviews done by intensive care unit physicians with relatives of potential brain-dead donors regarding decisions to donate or reasons for refusing organ donation. After termination of that study, interviews were done according to the intensivist's orientation, resulting in significantly decreased donation rates. Standardized interviews were then started again, resulting in increased donation rates. Of 17 families who participated in standardized interviews, 5 families (29.4%) agreed to donate organs of their brain-dead relatives. In the other group of families, intensivists governed informing the families of donation without standardized interviews. In this group of 35 families, 5 families (14.3%) approved organ donation. The decision regarding whether to agree to organ donation was statistically different between the 2 family groups (P < .05). Conducting a standard interview between relatives of brain-dead donors and the intensivists, facilitating visits between relatives and the brain-dead patients, and informing relatives about the donation process resulted in an increased rate of organ donation compared with

49 CFR 236.512 - Cab signal indication when locomotive enters block where restrictive conditions obtain.

Code of Federal Regulations, 2011 CFR

2011-10-01

... TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Automatic Train Stop, Train Control and Cab Signal Systems Standards § 236.512 Cab signal indication when locomotive enters block where restrictive conditions obtain. The automatic cab signal system shall be arranged so that when a locomotive enters or is...

22 CFR 305.4 - Selection standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Relations PEACE CORPS ELIGIBILITY AND STANDARDS FOR PEACE CORPS VOLUNTEER SERVICE § 305.4 Selection standards. To qualify for selection for overseas service as a Peace Corps Volunteer, applicants must... the goals of Peace Corps service, and a commitment to serve a full term as a Volunteer. (b) Productive...

22 CFR 305.4 - Selection standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Relations PEACE CORPS ELIGIBILITY AND STANDARDS FOR PEACE CORPS VOLUNTEER SERVICE § 305.4 Selection standards. To qualify for selection for overseas service as a Peace Corps Volunteer, applicants must... the goals of Peace Corps service, and a commitment to serve a full term as a Volunteer. (b) Productive...

22 CFR 305.4 - Selection standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Relations PEACE CORPS ELIGIBILITY AND STANDARDS FOR PEACE CORPS VOLUNTEER SERVICE § 305.4 Selection standards. To qualify for selection for overseas service as a Peace Corps Volunteer, applicants must... the goals of Peace Corps service, and a commitment to serve a full term as a Volunteer. (b) Productive...

40 CFR 85.525 - Applicable standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... prohibition, vehicles/engines that have been converted to operate on a different fuel must meet emission standards and related requirements as follows: (a) The modified vehicle/engine must meet the requirements that applied for the OEM vehicle/engine, or the most stringent OEM vehicle/engine standards in any...

Recall and dating of psychiatric symptoms. Test-retest reliability of time-related symptom questions in a standardized psychiatric interview.

PubMed

Wittchen, H U; Burke, J D; Semler, G; Pfister, H; Von Cranach, M; Zaudig, M

1989-05-01

The advent of more explicit diagnostic criteria and the growing interest in "lifetime" rates of mental disorders has made imperative an accurate determination of time-related diagnostic criteria. We used data from two independent test-retest studies of the Diagnostic Interview Schedule (DIS) and the Composite International Diagnostic Interview (CIDI) to study the reliability of different time-related questions in these fully standardized diagnostic interviews. With two exceptions (anxiety disorders and alcohol-related questions), the test-retest reliability of most time-related questions in both interviews was judged to be satisfactorily high. Furthermore, the validity of time-related questions in the DIS (age at symptom onset, duration and frequency of illness episodes) was examined by comparing them with detailed "consensus" ratings done independently by different clinicians for 207 former psychiatric inpatients. A surprisingly high concordance was found for former psychotic patients except for those still severely disturbed at the follow-up investigation. Some severe restrictions were also found for nonpsychotic disorders with regard to judgment of the age at onset of phobias, panic attacks, and depression. For a more valid assessment of time-related symptom information, the use of specific memory aids is suggested.

Development of national standards related to the integrated safety and security of high-rise buildings

NASA Astrophysics Data System (ADS)

Voskresenskaya, Elena; Vorona-Slivinskaya, Lubov

2018-03-01

The article considers the issues of developing national standards for high-rise construction. The system of standards should provide industrial, operational, economic and terrorist safety of high-rise buildings and facilities. Modern standards of high-rise construction should set the rules for designing engineering systems of high-rise buildings, which will ensure the integrated security of buildings, increase their energy efficiency and reduce the consumption of resources in construction and operation.

Cross-Validation of FITNESSGRAM® Health-Related Fitness Standards in Hungarian Youth

ERIC Educational Resources Information Center

Laurson, Kelly R.; Saint-Maurice, Pedro F.; Karsai, István; Csányi, Tamás

2015-01-01

Purpose: The purpose of this study was to cross-validate FITNESSGRAM® aerobic and body composition standards in a representative sample of Hungarian youth. Method: A nationally representative sample (N = 405) of Hungarian adolescents from the Hungarian National Youth Fitness Study (ages 12-18.9 years) participated in an aerobic capacity assessment…

Properties of LEGUS Clusters Obtained with Different Massive-Star Evolutionary Tracks

NASA Astrophysics Data System (ADS)

Wofford, A.; Charlot, S.; Eldridge, J. J.

We compute spectral libraries for populations of coeval stars using state-of-the-art massive-star evolutionary tracks that account for different astrophysics including rotation and close-binarity. Our synthetic spectra account for stellar and nebular contributions. We use our models to obtain E(B - V ), age, and mass for six clusters in spiral galaxy NGC 1566, which have ages of < 50 Myr and masses of > 5 x 104M⊙ according to standard models. NGC 1566 was observed from the NUV to the I-band as part of the imaging Treasury HST program LEGUS: Legacy Extragalactic UV Survey. We aim to establish i) if the models provide reasonable fits to the data, ii) how well the models and photometry are able to constrain the cluster properties, and iii) how different the properties obtained with different models are.

45 CFR 162.910 - Maintenance of standards and adoption of modifications and new standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS General Provisions for... developed through a process that provides for the following: (1) Open public access. (2) Coordination with...

45 CFR 162.910 - Maintenance of standards and adoption of modifications and new standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS General Provisions for... developed through a process that provides for the following: (1) Open public access. (2) Coordination with...

41 CFR 102-34.75 - Who is responsible for monitoring our compliance with fuel economy standards for motor vehicles...

Code of Federal Regulations, 2012 CFR

2012-01-01

... monitoring our compliance with fuel economy standards for motor vehicles we obtain? 102-34.75 Section 102-34... Vehicles § 102-34.75 Who is responsible for monitoring our compliance with fuel economy standards for motor... economy standards for motor vehicles they obtain. ...

41 CFR 102-34.75 - Who is responsible for monitoring our compliance with fuel economy standards for motor vehicles...

Code of Federal Regulations, 2014 CFR

2014-01-01

... monitoring our compliance with fuel economy standards for motor vehicles we obtain? 102-34.75 Section 102-34... Vehicles § 102-34.75 Who is responsible for monitoring our compliance with fuel economy standards for motor... economy standards for motor vehicles they obtain. ...

41 CFR 102-34.75 - Who is responsible for monitoring our compliance with fuel economy standards for motor vehicles...

Code of Federal Regulations, 2013 CFR

2013-07-01

... monitoring our compliance with fuel economy standards for motor vehicles we obtain? 102-34.75 Section 102-34... Vehicles § 102-34.75 Who is responsible for monitoring our compliance with fuel economy standards for motor... economy standards for motor vehicles they obtain. ...

41 CFR 102-34.75 - Who is responsible for monitoring our compliance with fuel economy standards for motor vehicles...

Code of Federal Regulations, 2011 CFR

2011-01-01

... monitoring our compliance with fuel economy standards for motor vehicles we obtain? 102-34.75 Section 102-34... Vehicles § 102-34.75 Who is responsible for monitoring our compliance with fuel economy standards for motor... economy standards for motor vehicles they obtain. ...

Cross-Domain Analogies as Relating Derived Relations among Two Separate Relational Networks

PubMed Central

Ruiz, Francisco J; Luciano, Carmen

2011-01-01

Contemporary behavior analytic research is making headway in analyzing analogy as the establishment of a relation of coordination among common types of trained or derived relations. Previous studies have been focused on within-domain analogy. The current study expands previous research by analyzing cross-domain analogy as relating relations among separate relational networks and by correlating participants' performance with a standard measure of analogical reasoning. In two experiments, adult participants first completed general intelligence and analogical reasoning tests. Subsequently, they were exposed to a computerized conditional discrimination training procedure designed to create two relational networks, each consisting of two 3-member equivalence classes. The critical test was a two-part analogical test in which participants had to relate combinatorial relations of coordination and distinction between the two relational networks. In Experiment 1, combinatorial relations for each network were individually tested prior to analogical testing, but in Experiment 2 they were not. Across both experiments, 65% of participants passed the analogical test on the first attempt. Moreover, results from the training procedure were strongly correlated with the standard measure of analogical reasoning. PMID:21547072

Solar industrial process heat systems: An assessment of standards for materials and components

NASA Astrophysics Data System (ADS)

Rossiter, W. J.; Shipp, W. E.

1981-09-01

A study was conducted to obtain information on the performance of materials and components in operational solar industrial process heat (PH) systems, and to provide recommendations for the development of standards including evaluative test procedures for materials and components. An assessment of the needs for standards for evaluating the long-term performance of materials and components of IPH systems was made. The assessment was based on the availability of existing standards, and information obtained from a field survey of operational systems, the literature, and discussions with individuals in the industry. Field inspections of 10 operational IPH systems were performed.

45 CFR 164.306 - Security standards: General rules.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Security standards: General rules. 164.306 Section 164.306 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS SECURITY AND PRIVACY Security Standards for the Protection of Electronic Protected...

45 CFR 164.306 - Security standards: General rules.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Security standards: General rules. 164.306 Section 164.306 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS SECURITY AND PRIVACY Security Standards for the Protection of Electronic Protected...

45 CFR 164.306 - Security standards: General rules.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Security standards: General rules. 164.306 Section 164.306 Public Welfare Department of Health and Human Services ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS SECURITY AND PRIVACY Security Standards for the Protection of Electronic Protected...

49 CFR 178.510 - Standards for wooden barrels.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Standards for wooden barrels. 178.510 Section 178.510 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS...-bulk Performance-Oriented Packaging Standards § 178.510 Standards for wooden barrels. (a) The following...

49 CFR 178.510 - Standards for wooden barrels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for wooden barrels. 178.510 Section 178.510 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.510 Standards for wooden barrels. (a) The...

Relation of NDVI obtained from different remote sensing at different space and resolutions sensors in Spanish Dehesas

NASA Astrophysics Data System (ADS)

Escribano Rodríguez, Juan; Tarquis, Ana M.; Saa-Requejo, Antonio; Díaz-Ambrona, Carlos G. H.

2015-04-01

Satellite data are an important source of information and serve as monitoring crops on large scales. There are several indexes, but the most used for monitoring vegetation is NDVI (Normalized Difference Vegetation Index), calculated from the spectral bands of red (RED) and near infrared (NIR), obtaining the value according to relationship: [(NIR - RED) / (NIR + RED)]. During the years 2010-2013 monthly monitoring was conducted in three areas of Spain (Salamanca, Caceres and Cordoba). Pasture plots were selected and satellite images of two different sensors, DEIMOS-1 and MODIS were obtained. DEIMOS-1 is based on the concept Microsat-100 from Surrey. It is designed for imaging the Earth with a resolution good enough to study terrestrial vegetation cover (20x20 m), although with a wide range of visual field (600 km) to get those images with high temporal resolution. By contrast, MODIS images present a much lower spatial resolution (500x500 m). Indices obtained from both sensors to the same area and date are compared and the results show r2 = 0.56; r2 = 0.65 and r2 = 0.90 for the areas of Salamanca, Cáceres and Cordoba respectively. According to the results obtained show that the NDVI obtained by MODIS is slightly larger than that obtained by the sensor for DEIMOS for same time and area. References J.A. Escribano, C.G.H. Diaz-Ambrona, L. Recuero, M. Huesca, V. Cicuendez, A. Palacios-Orueta y A.M. Tarquis. Aplicacion de Indices de Vegetacion para evaluar la falta de produccion de pastos y montaneras en dehesas. I Congreso Iberico de la Dehesa y el Montado. 6-7 Noviembre, 2013, Badajoz. J.A. Escribano Rodriguez, A.M. Tarquis, C.G. Hernandez Diaz-Ambrona. Pasture Drought Insurance Based on NDVI and SAVI. Geophysical Research Abstracts, 14, EGU2012-13945, 2012. EGU General Assembly 2012. Juan Escribano Rodriguez, Carmelo Alonso, Ana Maria Tarquis, Rosa Maria Benito, Carlos Hernandez Diaz-Ambrona. Comparison of NDVI fields obtained from different remote sensors

Obtaining orthotropic elasticity tensor using entries zeroing method.

NASA Astrophysics Data System (ADS)

Gierlach, Bartosz; Danek, Tomasz

2017-04-01

A generally anisotropic elasticity tensor obtained from measurements can be represented by a tensor belonging to one of eight material symmetry classes. Knowledge of symmetry class and orientation is helpful for describing physical properties of a medium. For each non-trivial symmetry class except isotropic this problem is nonlinear. A common method of obtaining effective tensor is a choosing its non-trivial symmetry class and minimizing Frobenius norm between measured and effective tensor in the same coordinate system. Global optimization algorithm has to be used to determine the best rotation of a tensor. In this contribution, we propose a new approach to obtain optimal tensor, with the assumption that it is orthotropic (or at least has a similar shape to the orthotropic one). In orthotropic form tensor 24 out of 36 entries are zeros. The idea is to minimize the sum of squared entries which are supposed to be equal to zero through rotation calculated with optimization algorithm - in this case Particle Swarm Optimization (PSO) algorithm. Quaternions were used to parametrize rotations in 3D space to improve computational efficiency. In order to avoid a choice of local minima we apply PSO several times and only if we obtain similar results for the third time we consider it as a correct value and finish computations. To analyze obtained results Monte-Carlo method was used. After thousands of single runs of PSO optimization, we obtained values of quaternion parts and plot them. Points concentrate in several points of the graph following the regular pattern. It suggests the existence of more complex symmetry in the analyzed tensor. Then thousands of realizations of generally anisotropic tensor were generated - each tensor entry was replaced with a random value drawn from normal distribution having a mean equal to measured tensor entry and standard deviation of the measurement. Each of these tensors was subject of PSO based optimization delivering quaternion for optimal

A natural pharma standard supplement formulation to control treatment-related toxicity and oxidative stress in genitourinary cancer: a preliminary study.

PubMed

Ledda, A; Belcaro, G; Dugall, M; Luzzi, R; Hosoi, M; Feragalli, B; Cotellese, R; Cosentino, V; Cosentino, M; Eggenhoffner, R; Pellizzato, M; Fratter, A; Giacomelli, L

2017-09-01

Oncological treatments are associated with toxicities that may decrease compliance to treatment in most genitourinary cancer patients. Supplementation with pharmaceutical-standardized supplement may be a supplementary method to control the side effects after chemo- and radiotherapy and the increased oxidative stress associated to treatments. This registry study evaluated a natural combination of supplements containing curcumin, cordyceps, and astaxanthin (Oncotris™) used as supplementary management in genitourinary cancer patients who had undergone oncological therapy. Patients with genitourinary cancers (prostate or bladder malignancies) who had undergone and completed cancer treatments (radiotherapy, chemotherapy or intravesical immunotherapy with increased oxidative stress and residual symptoms) were recruited in this registry, supplement study. Registry subjects (n = 61) freely decided to follow either a standard management (SM) (control group = 35) or SM plus oral daily supplementation (supplement group = 26). Evaluation of severity of treatment-related residual side effects, blood count test, prostate-specific antigen (PSA) test and plasma free radicals (oxidative stress) were performed at inclusion and at the end of the observational period (6 weeks). Two patients dropped out during the registry. Therefore, the analysis included 59 participants: 26 individuals in the supplementation group and 33 in the control group. In the supplement group, the intensity of signs and symptoms (treatment-related) and residual side effects significantly decreased at 6 weeks: minimal changes were observed in controls. Supplementation with Oncotris™ was associated with a significant improvement in blood cell count and with a decreased level of plasmatic PSA and oxidative stress. Naturally-derived supplements, specifically Oncotris™ (patent pending), could support the body to overcome the treatment-related toxicities - and the relative oxidative stress in cancer patients.

15 CFR 10.13 - Withdrawal of a published standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

... substantial public impact, that it does not duplicate a standard published by a private standards-writing...) Before withdrawing a standard published under these procedures, the Director will review the relative... years. (2) Public notice of intent to withdraw an existing standard published under these procedures...

15 CFR 10.13 - Withdrawal of a published standard.

Code of Federal Regulations, 2013 CFR

2013-01-01

... substantial public impact, that it does not duplicate a standard published by a private standards-writing...) Before withdrawing a standard published under these procedures, the Director will review the relative... years. (2) Public notice of intent to withdraw an existing standard published under these procedures...

15 CFR 10.13 - Withdrawal of a published standard.

Code of Federal Regulations, 2012 CFR

2012-01-01

... substantial public impact, that it does not duplicate a standard published by a private standards-writing...) Before withdrawing a standard published under these procedures, the Director will review the relative... years. (2) Public notice of intent to withdraw an existing standard published under these procedures...

15 CFR 10.13 - Withdrawal of a published standard.

Code of Federal Regulations, 2014 CFR

2014-01-01

... substantial public impact, that it does not duplicate a standard published by a private standards-writing...) Before withdrawing a standard published under these procedures, the Director will review the relative... years. (2) Public notice of intent to withdraw an existing standard published under these procedures...

Increasing relative nonclassicality quantified by standard entanglement potentials by dissipation and unbalanced beam splitting

NASA Astrophysics Data System (ADS)

Miranowicz, Adam; Bartkiewicz, Karol; Lambert, Neill; Chen, Yueh-Nan; Nori, Franco

2015-12-01

If a single-mode nonclassical light is combined with the vacuum on a beam splitter, then the output state is entangled. As proposed in [Phys. Rev. Lett. 94, 173602 (2005), 10.1103/PhysRevLett.94.173602], by measuring this output-state entanglement for a balanced lossless beam splitter, one can quantify the input-state nonclassicality. These measures of nonclassicality (referred to as entanglement potentials) can be based, in principle, on various entanglement measures, leading to the negativity (NP) and concurrence (CP) potentials, and the potential for the relative entropy of entanglement (REEP). We search for the maximal relative nonclassicality, which can be achieved by comparing two entanglement measures for (i) arbitrary two-qubit states and (ii) those which can be generated from a photon-number qubit via a balanced lossless beam splitter, where the qubit basis states are the vacuum and single-photon states. Surprisingly, we find that the maximal relative nonclassicality, measured by the REEP for a given value of the NP, can be increased (if NP <0.527 ) by using either a tunable beam splitter or by amplitude damping of the output state of the balanced beam splitter. We also show that the maximal relative nonclassicality, measured by the NP for a given value of the REEP, can be increased by phase damping (dephasing). Note that the entanglement itself is not increased by these losses (since they act locally), but the possible ratios of different measures are affected. Moreover, we show that partially dephased states can be more nonclassical than both pure states and completely dephased states, by comparing the NP for a given value of the REEP. Thus, one can conclude that not all standard entanglement measures can be used as entanglement potentials. Alternatively, one can infer that a single balanced lossless beam splitter is not always transferring the whole nonclassicality of its input state into the entanglement of its output modes. The application of a lossy

Superintendents' Beliefs and Behaviors regarding Instructional Leadership Standards Reform

ERIC Educational Resources Information Center

Lewis, Timothy; Rice, Margaret; Rice, Richard, Jr.

2011-01-01

This study examined Alabama school superintendents' perceptions of the new Alabama instructional leadership standards as related to the superintendency, and superintendents' professional needs related to the knowledge indicators in the standards. Also explored were superintendents' perceptions towards professional development delivery methods,…