Sample records for obtaining reliable information

  1. Uncertainties in obtaining high reliability from stress-strength models

    NASA Technical Reports Server (NTRS)

    Neal, Donald M.; Matthews, William T.; Vangel, Mark G.

    1992-01-01

    There has been a recent interest in determining high statistical reliability in risk assessment of aircraft components. The potential consequences are identified of incorrectly assuming a particular statistical distribution for stress or strength data used in obtaining the high reliability values. The computation of the reliability is defined as the probability of the strength being greater than the stress over the range of stress values. This method is often referred to as the stress-strength model. A sensitivity analysis was performed involving a comparison of reliability results in order to evaluate the effects of assuming specific statistical distributions. Both known population distributions, and those that differed slightly from the known, were considered. Results showed substantial differences in reliability estimates even for almost nondetectable differences in the assumed distributions. These differences represent a potential problem in using the stress-strength model for high reliability computations, since in practice it is impossible to ever know the exact (population) distribution. An alternative reliability computation procedure is examined involving determination of a lower bound on the reliability values using extreme value distributions. This procedure reduces the possibility of obtaining nonconservative reliability estimates. Results indicated the method can provide conservative bounds when computing high reliability. An alternative reliability computation procedure is examined involving determination of a lower bound on the reliability values using extreme value distributions. This procedure reduces the possibility of obtaining nonconservative reliability estimates. Results indicated the method can provide conservative bounds when computing high reliability.

  2. Photovoltaic Reliability Workshop Lodging Information | Photovoltaic

    Science.gov Websites

    Research | NREL Photovoltaic Reliability Workshop Lodging Information Photovoltaic Reliability Workshop Lodging Information The 2018 Photovoltaic Reliability Workshop (PVRW) will be held Tuesday

  3. Toward Obtaining Reliable Particulate Air Quality Information from Satellites

    NASA Astrophysics Data System (ADS)

    Strawa, A. W.; Chatfield, R. B.; Legg, M.; Esswein, R.; Justice, E.

    2009-12-01

    Air quality agencies use ground sites to monitor air quality, providing accurate information at particular points. Using measurements from satellite imagery has the potential to provide air quality information in a timely manner with better spatial resolution and at a lower cost that can also useful for model validation. While previous studies show acceptable correlations between Aerosol Optical Depth (AOD) derived from MODIS and surface Particulate Matter (PM) measurements on the eastern US, the data do not correlate well in the western US (Al-Saadi et al., 2005; Engle-Cox et al., 2004) . This paper seeks to improve the AOD-PM correlations by using advanced statistical analysis techniques. Our study area is the San Joaquin Valley in California because air quality in this region has failed to meet state and federal attainment standards for PM for the past several years. A previous investigation found good correlation of the AOD values between MODIS, MISR and AERONET, but poor correlations (R2 ~ 0.02) between satellite-based AOD and surface PM2.5 measurements. PM2.5 measurements correlated somewhat better (R2 ~ 0.18) with MODIS-derived AOD using the Deep Blue surface reflectance algorithm (Hsu et al., 2006) rather than the standard MODIS algorithm. This level of correlation is not adequate for reliable air quality measurements. Pelletier et al. (2007) used generalized additive models (GAMs) and meteorological data to improve the correlation between PM and AERONET AOD in western Europe. Additive models are more flexible than linear models and the functional relationships can be plotted to give a sense of the relationship between the predictor and the response. In this paper we use GAMs to improve surface PM2.5 to MODIS-AOD correlations. For example, we achieve an R2 ~ 0.44 using a GAM that includes the Deep Blue AOD, and day of year as parameters. Including NOx observations, improves the R2 ~ 0.64. Surprisingly Ångström exponent did not prove to be a significant

  4. The Data Evaluation for Obtaining Accuracy and Reliability

    NASA Astrophysics Data System (ADS)

    Kim, Chang Geun; Chae, Kyun Shik; Lee, Sang Tae; Bhang, Gun Woong

    2012-11-01

    Nemours scientific measurement results are flooded from the paper, data book, etc. as fast growing of internet. We meet many different measurement results on the same measurand. In this moment, we are face to choose most reliable one out of them. But it is not easy to choose and use the accurate and reliable data as we do at an ice cream parlor. Even expert users feel difficult to distinguish the accurate and reliable scientific data from huge amount of measurement results. For this reason, the data evaluation is getting more important as the fast growing of internet and globalization. Furthermore the expressions of measurement results are not in standardi-zation. As these need, the international movement has been enhanced. At the first step, the global harmonization of terminology used in metrology and the expression of uncertainty in measurement were published in ISO. These methods are wide spread to many area of science on their measurement to obtain the accuracy and reliability. In this paper, it is introduced that the GUM, SRD and data evaluation on atomic collisions.

  5. Transit Reliability Information Program : PATCO-WMATA Propulsion System Reliability/Productivity Analysis

    DOT National Transportation Integrated Search

    1984-10-01

    The Transit Reliability Information Program (TRIP) is a government-initiated program to assist the transit industry in satisfying its need for transit reliability information. TRIP provides this assistance through the operation of a national data ban...

  6. Analysis of the Quality of Information Obtained About Uterine Artery Embolization From the Internet

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tavare, Aniket N.; Alsafi, Ali, E-mail: ali.alsafi03@imperial.ac.uk; Hamady, Mohamad S.

    Purpose: The Internet is widely used by patients to source health care-related information. We sought to analyse the quality of information available on the Internet about uterine artery embolization (UAE). Materials and Methods: We searched three major search engines for the phrase 'uterine artery embolization' and compiled the top 50 results from each engine. After excluding repeated sites, scientific articles, and links to documents, the remaining 50 sites were assessed using the LIDA instrument, which scores sites across the domains of accessibility, usability, and reliability. The Fleisch reading ease score (FRES) was calculated for each of the sites. Finally, wemore » checked the country of origin and the presence of certification by the Health On the Net Foundation (HONcode) as well as their effect on LIDA and FRES scores.ResultsThe following mean scores were obtained: accessibility 48/60 (80%), usability 42/54 (77%), reliability 20/51 (39%), total LIDA 110/165 (67%), and FRES 42/100 (42%). Nine sites had HONcode certification, and this was associated with significantly greater (p < 0.05) reliability and total LIDA and FRES scores. When comparing sites between United Kingdom and United States, there was marked variation in the quality of results obtained when searching for information on UAE (p < 0.05). Conclusion: In general, sites were well designed and easy to use. However, many scored poorly on the reliability of their information either because they were produced in a non-evidence-based way or because they lacking currency. It is important that patients are guided to reputable, location-specific sources of information online, especially because prominent search engine rank does not guarantee reliability of information.« less

  7. Transit Reliability Information Program : Reliability Verification Demonstration Plan for Rapid Rail Vehicles

    DOT National Transportation Integrated Search

    1981-08-01

    The Transit Reliability Information Program (TRIP) is a government-initiated program to assist the transit industry in satisfying its need for transit reliability information. TRIP provides this assistance through the operation of a national Data Ban...

  8. Obtaining Reliable Estimates of Ambulatory Physical Activity in People with Parkinson's Disease.

    PubMed

    Paul, Serene S; Ellis, Terry D; Dibble, Leland E; Earhart, Gammon M; Ford, Matthew P; Foreman, K Bo; Cavanaugh, James T

    2016-05-05

    We determined the number of days required, and whether to include weekdays and/or weekends, to obtain reliable measures of ambulatory physical activity in people with Parkinson's disease (PD). Ninety-two persons with PD wore a step activity monitor for seven days. The number of days required to obtain a reliable estimate of daily activity was determined from the mean intraclass correlation (ICC2,1) for all possible combinations of 1-6 consecutive days of monitoring. Two days of monitoring were sufficient to obtain reliable daily activity estimates (ICC2,1 > 0.9). Amount (p = 0.03) but not intensity (p = 0.13) of ambulatory activity was greater on weekdays than weekends. Activity prescription based on amount rather than intensity may be more appropriate for people with PD.

  9. How Reliable Are Informal Reading Inventories?

    ERIC Educational Resources Information Center

    Spector, Janet E.

    2005-01-01

    Informal Reading Inventories (IRI) are often recommended as instructionally relevant measures of reading. However, they have also been criticized for inattention to technical quality. Examination of reliability evidence in nine recently revised IRIs revealed that fewer than half report reliability. Several appear to have sufficient reliability for…

  10. The reliability of dietary and lifestyle information obtained from spouses in an elderly chinese population.

    PubMed

    Liang, Wenbin; Binns, Colin; Lee, Andy H; Huang, Rongsheng; Hu, Delong

    2008-01-01

    In many health studies of the elderly population, the subjects have cognitive or linguistic impairments, so data need to be collected from surrogates. This study compares dietary and lifestyle information reported by elderly Chinese with those provided by their spouses. Community couples 60 years and older were recruited to participate in an interview. One person from each couple was randomly chosen as the index person. Characteristics concerning the index person were then solicited from that person and separately from his or her spouse using validated questionnaires. For the 128 food items considered, the mean kappa was 0.73 for both frequency (SD 0.18) and amount (SD 0.22) of intake, and more than 70% of the couples had kappa statistics exceeding 0.61. Food items exhibiting high agreement between the spouses include rice, apples, tomatoes, and pork chops. The proportion of perfect agreement was higher than 80% for physical activity, smoking, and tea drinking behaviors. In conclusion, the spouse can serve as a proxy to provide reliable information when his or her partner is unavailable.

  11. Transit Reliability Information Program Participants Guidelines

    DOT National Transportation Integrated Search

    1981-03-01

    The document provides guidelines for participation in the Transit Reliability Information Program (TRIP). TRIP is a government-initiated program designed to assist the transit industry in satisfying its need for transit equipment reliability data. TR...

  12. Reliability and Accuracy of Static Parameters Obtained From Ink and Pressure Platform Footprints.

    PubMed

    Zuil-Escobar, Juan Carlos; Martínez-Cepa, Carmen Belén; Martín-Urrialde, Jose Antonio; Gómez-Conesa, Antonia

    2016-09-01

    The purpose of this study was to evaluate the accuracy and the intrarater reliability of arch angle (AA), Staheli Index (SI), and Chippaux-Smirak Index (CSI) obtained from ink and pressure platform footprints. We obtained AA, SI, and CSI measurements from ink pedigraph footprints and pressure platform footprints in 40 healthy participants (aged 25.65 ± 5.187 years). Intrarater reliability was calculated for all parameters obtained using the 2 methods. Standard error of measurement and minimal detectable change were also calculated. A repeated-measure analysis of variance was used to identify differences between ink and pressure platform footprints. Intraclass correlation coefficient and Bland and Altman plots were used to assess similar parameters obtained using different methods. Intrarater reliability was >0.9 for all parameters and was slightly higher for the ink footprints. No statistical difference was reported in repeated-measure analysis of variance for any of the parameters. Intraclass correlation coefficient values from AA, SI, and CSI that were obtained using ink footprints and pressure platform footprints were excellent, ranging from 0.797 to 0.829. However, pressure platform overestimated AA and underestimated SI and CSI. Our study revealed that AA, SI, and CSI were similar regardless of whether the ink or pressure platform method was used. In addition, the parameters indicated high intrarater reliability and were reproducible. Copyright © 2016. Published by Elsevier Inc.

  13. Transit Reliability Information Program (TRIP) : Final Technical Report

    DOT National Transportation Integrated Search

    1984-05-01

    The Transit Reliability Information Program (TRIP) is a government-initiated program to assist the transit industry in satisfying its need for rail transit car subsystem reliability information. TRIP provided this assistance through the operation of ...

  14. Transit Reliability Information Program (TRIP) Phase I Report

    DOT National Transportation Integrated Search

    1981-06-01

    The Transit Reliability Information Program (TRIP) is a government initiated program to assist the transit industry in satisfying its need for transit reliability information. TRIP provides this assistance through the operation of a national reliabil...

  15. Modeling reliability measurement of interface on information system: Towards the forensic of rules

    NASA Astrophysics Data System (ADS)

    Nasution, M. K. M.; Sitompul, Darwin; Harahap, Marwan

    2018-02-01

    Today almost all machines depend on the software. As a software and hardware system depends also on the rules that are the procedures for its use. If the procedure or program can be reliably characterized by involving the concept of graph, logic, and probability, then regulatory strength can also be measured accordingly. Therefore, this paper initiates an enumeration model to measure the reliability of interfaces based on the case of information systems supported by the rules of use by the relevant agencies. An enumeration model is obtained based on software reliability calculation.

  16. Finding Reliable Health Information Online

    MedlinePlus

    Skip to main content Finding Reliable Health Information Online Enter Search Term(s): Español Research Funding An Overview Bioinformatics Current Grants Education and Training Funding Extramural Research News Features Funding Divisions Funding ...

  17. Questioning reliability assessments of health information on social media.

    PubMed

    Dalmer, Nicole K

    2017-01-01

    This narrative review examines assessments of the reliability of online health information retrieved through social media to ascertain whether health information accessed or disseminated through social media should be evaluated differently than other online health information. Several medical, library and information science, and interdisciplinary databases were searched using terms relating to social media, reliability, and health information. While social media's increasing role in health information consumption is recognized, studies are dominated by investigations of traditional (i.e., non-social media) sites. To more richly assess constructions of reliability when using social media for health information, future research must focus on health consumers' unique contexts, virtual relationships, and degrees of trust within their social networks.

  18. Online patient information on Vagus Nerve Stimulation: How reliable is it for facilitating shared decision making?

    PubMed

    Ved, Ronak; Cobbold, Naomi; Igbagiri, Kueni; Willis, Mark; Leach, Paul; Zaben, Malik

    2017-08-01

    This study evaluates the quality of information available on the internet for carers of children with epilepsy considering treatment with Vagus Nerve Stimulation (VNS). Selected key phrases were entered into two popular search engines (Google™, Yahoo™). These phrases were: "Vagus nerve stimulator", alone and in combination with "childhood epilepsy", "paediatric epilepsy" and "epilepsy in childhood"; "VNS", and "VNS epilepsy". The first 50 hits per search were then screened. Of 600 identified sites, duplicated (262), irrelevant (230) and inaccessible (15) results were excluded. 93 websites were identified for evaluation using the DISCERN instrument, an online validation tool for patient information websites. The mean DISCERN score of all analysed websites was 39/80 (49%; SD 13.5). This equates to Fair to borderline Poor global quality, (Excellent=80-63; Good=62-51; Fair=50-39; Poor=38-27; Very poor=26-15). None of the analysed sites obtained an Excellent quality rating. 13% (12) obtained a Good score, 40% (37) obtained an Average score, 35% (33) obtained a Poor score, and 12% (11) obtained a Very poor score. The cohort of websites scored particularly poorly on assessment of whether reliable, holistic information was presented, for instance provision of reliable sources, (28%, SD 18) and discussion of alternative treatments, (30%, SD 14). To facilitate patient-centred shared decision-making, high quality information needs to be available for patients and families considering VNS. This study identifies that such information is difficult to locate on the internet. There is a need to develop focussed and reliable online patient resources for VNS. Copyright © 2017 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

  19. Evaluation of the Transit Reliability Information Program

    DOT National Transportation Integrated Search

    1982-06-01

    This report presents an evaluation of the rail portion of the Transit Reliability Information Program (TRIP), which was designed to collect and analyze equipment reliability data on U.S. transit systems. This assessment was conducted at the end of it...

  20. 40 CFR 1515.10 - Obtaining available information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Obtaining available information. 1515.10 Section 1515.10 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY FREEDOM OF INFORMATION ACT PROCEDURES Availability of Information § 1515.10 Obtaining available information. (a) When a...

  1. 48 CFR 209.105-1 - Obtaining information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Information Retrieval System (PPIRS), available at http://www.ppirs.gov. Information relating to contract... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the Excluded Parties List System, see PGI 209...

  2. 48 CFR 209.105-1 - Obtaining information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Performance Information Retrieval System (PPIRS), available at http://www.ppirs.gov. Information relating to... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the System for Award Management Exclusions, see...

  3. 48 CFR 209.105-1 - Obtaining information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Information Retrieval System (PPIRS), available at http://www.ppirs.gov. Information relating to contract... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the Excluded Parties List System, see PGI 209...

  4. 48 CFR 209.105-1 - Obtaining information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Information Retrieval System (PPIRS), available at http://www.ppirs.gov. Information relating to contract... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the Excluded Parties List System, see PGI 209...

  5. Sources of medicine information and their reliability evaluated by medicine users.

    PubMed

    Närhi, Ulla

    2007-12-01

    To study the medicine users' sources of medicine information and the perceived reliability of these sources in different age groups. A computer-aided telephone interview (CATI) to Finnish consumers (n = 1,004). Those respondents (n = 714) who reported using any prescription or self-medication medicines more than once a month were included in the study. The respondents were interviewed about their use of sources of medicine information during the previous 6 months. The reliability of sources in different age groups was estimated using a 4-point scale: very reliable, somewhat reliable, somewhat unreliable and very unreliable. The respondents also had the option of being unable to make an appraisal. A proportion of respondents reporting using the source, number of mentioned sources and their reliability evaluated by respondents. About half of the respondents in each age group mentioned two to four sources. The most common sources of information were Patient Information Leaflets (PILs) (74%), doctors (68%) and pharmacists (60%). Next came television (40%), newspapers and magazines (40%), drug advertisements (32%), nurses (28%), drug information leaflets (27%), relatives and friends (24%), medicine guides and books (22%) and the Internet (20%). There was a significant difference between age groups in reporting the Internet as a source of medicine information (15-34-year-old respondents reported the greatest Internet use). The three most reliable sources in every age group were reported to be PILs, doctors and pharmacists. Nurses, drug regulatory authorities, drug information leaflets and medicine guides and books were considered next most reliable. Relatives and friends, television, newspapers and magazines were considered the least reliable. The respondents were most uncertain about the reliability of the Internet, patient organisations and telephone services. There was a significant difference between age groups in evaluating the reliability of telephone services (15

  6. 48 CFR 9.105-1 - Obtaining information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Obtaining information. 9... information. (a) Before making a determination of responsibility, the contracting officer shall possess or obtain information sufficient to be satisfied that a prospective contractor currently meets the...

  7. 48 CFR 509.105-1 - Obtaining information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Obtaining information. 509... Obtaining information. (a) From a prospective contractor. FAR 9.105-1 lists a number of sources of information that a contracting officer may utilize before making a determination of responsibility. The...

  8. 48 CFR 509.105-1 - Obtaining information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Obtaining information. 509... Obtaining information. (a) From a prospective contractor. FAR 9.105-1 lists a number of sources of information that a contracting officer may utilize before making a determination of responsibility. The...

  9. 48 CFR 509.105-1 - Obtaining information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Obtaining information. 509... Obtaining information. (a) From a prospective contractor. FAR 9.105-1 lists a number of sources of information that a contracting officer may utilize before making a determination of responsibility. The...

  10. 48 CFR 509.105-1 - Obtaining information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Obtaining information. 509... Obtaining information. (a) From a prospective contractor. FAR 9.105-1 lists a number of sources of information that a contracting officer may utilize before making a determination of responsibility. The...

  11. 48 CFR 209.105-1 - Obtaining information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Obtaining information. 209....105-1 Obtaining information. (1) For guidance on using the Exclusions section of the System for Award... responsibility (see FAR 9.104-1(c)). One source of information relating to contractor performance is the Past...

  12. Foraging Bumble Bees Weigh the Reliability of Personal and Social Information.

    PubMed

    Dunlap, Aimee S; Nielsen, Matthew E; Dornhaus, Anna; Papaj, Daniel R

    2016-05-09

    Many animals, including insects, make decisions using both personally gathered information and social information derived from the behavior of other, usually conspecific, individuals [1]. Moreover, animals adjust use of social versus personal information appropriately under a variety of experimental conditions [2-5]. An important factor in how information is used is the information's reliability, that is, how consistently the information is correlated with something of relevance in the environment [6]. The reliability of information determines which signals should be attended to during communication [6-9], which types of stimuli animals should learn about, and even whether learning should evolve [10, 11]. Here, we show that bumble bees (Bombus impatiens) account for the reliability of personally acquired information (which flower color was previously associated with reward) and social information (which flowers are chosen by other bees) in making foraging decisions; however, the two types of information are not treated equally. Bees prefer to use social information if it predicts a reward at all, but if social information becomes entirely unreliable, flower color will be used instead. This greater sensitivity to the reliability of social information, and avoidance of conspecifics in some cases, may reflect the specific ecological circumstances of bee foraging. Overall, the bees' ability to make decisions based on both personally acquired and socially derived information, and the relative reliability of both, demonstrates a new level of sophistication and flexibility in animal, particularly insect, decision-making. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. 5 CFR 1501.12 - Obtaining further information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Obtaining further information. 1501.12 Section 1501.12 Administrative Personnel THE INTERNATIONAL ORGANIZATIONS EMPLOYEES LOYALTY BOARD OPERATIONS OF THE INTERNATIONAL ORGANIZATIONS EMPLOYEES LOYALTY BOARD § 1501.12 Obtaining further information...

  14. Portfolio assessment during medical internships: How to obtain a reliable and feasible assessment procedure?

    PubMed

    Michels, Nele R M; Driessen, Erik W; Muijtjens, Arno M M; Van Gaal, Luc F; Bossaert, Leo L; De Winter, Benedicte Y

    2009-12-01

    A portfolio is used to mentor and assess students' clinical performance at the workplace. However, students and raters often perceive the portfolio as a time-consuming instrument. In this study, we investigated whether assessment during medical internship by a portfolio can combine reliability and feasibility. The domain-oriented reliability of 61 double-rated portfolios was measured, using a generalisability analysis with portfolio tasks and raters as sources of variation in measuring the performance of a student. We obtained reliability (Phi coefficient) of 0.87 with this internship portfolio containing 15 double-rated tasks. The generalisability analysis showed that an acceptable level of reliability (Phi = 0.80) was maintained when the amount of portfolio tasks was decreased to 13 or 9 using one and two raters, respectively. Our study shows that a portfolio can be a reliable method for the assessment of workplace learning. The possibility of reducing the amount of tasks or raters while maintaining a sufficient level of reliability suggests an increase in feasibility of portfolio use for both students and raters.

  15. 5 CFR 2411.5 - Procedure for obtaining information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Procedure for obtaining information. 2411.5 Section 2411.5 Administrative Personnel FEDERAL LABOR RELATIONS AUTHORITY, GENERAL COUNSEL OF THE... OFFICIAL INFORMATION § 2411.5 Procedure for obtaining information. (a) Authority/General Counsel/Panel/IG...

  16. The Information Function for the One-Parameter Logistic Model: Is it Reliability?

    ERIC Educational Resources Information Center

    Doran, Harold C.

    2005-01-01

    The information function is an important statistic in item response theory (IRT) applications. Although the information function is often described as the IRT version of reliability, it differs from the classical notion of reliability from a critical perspective: replication. This article first explores the information function for the…

  17. Operation Reliability Assessment for Cutting Tools by Applying a Proportional Covariate Model to Condition Monitoring Information

    PubMed Central

    Cai, Gaigai; Chen, Xuefeng; Li, Bing; Chen, Baojia; He, Zhengjia

    2012-01-01

    The reliability of cutting tools is critical to machining precision and production efficiency. The conventional statistic-based reliability assessment method aims at providing a general and overall estimation of reliability for a large population of identical units under given and fixed conditions. However, it has limited effectiveness in depicting the operational characteristics of a cutting tool. To overcome this limitation, this paper proposes an approach to assess the operation reliability of cutting tools. A proportional covariate model is introduced to construct the relationship between operation reliability and condition monitoring information. The wavelet packet transform and an improved distance evaluation technique are used to extract sensitive features from vibration signals, and a covariate function is constructed based on the proportional covariate model. Ultimately, the failure rate function of the cutting tool being assessed is calculated using the baseline covariate function obtained from a small sample of historical data. Experimental results and a comparative study show that the proposed method is effective for assessing the operation reliability of cutting tools. PMID:23201980

  18. The reliability and validity of a three-camera foot image system for obtaining foot anthropometrics.

    PubMed

    O'Meara, Damien; Vanwanseele, Benedicte; Hunt, Adrienne; Smith, Richard

    2010-08-01

    The purpose was to develop a foot image capture and measurement system with web cameras (the 3-FIS) to provide reliable and valid foot anthropometric measures with efficiency comparable to that of the conventional method of using a handheld anthropometer. Eleven foot measures were obtained from 10 subjects using both methods. Reliability of each method was determined over 3 consecutive days using the intraclass correlation coefficient and root mean square error (RMSE). Reliability was excellent for both the 3-FIS and the handheld anthropometer for the same 10 variables, and good for the fifth metatarsophalangeal joint height. The RMSE values over 3 days ranged from 0.9 to 2.2 mm for the handheld anthropometer, and from 0.8 to 3.6 mm for the 3-FIS. The RMSE values between the 3-FIS and the handheld anthropometer were between 2.3 and 7.4 mm. The 3-FIS required less time to collect and obtain the final variables than the handheld anthropometer. The 3-FIS provided accurate and reproducible results for each of the foot variables and in less time than the conventional approach of a handheld anthropometer.

  19. Validity and Reliability of Scores Obtained on Multiple-Choice Questions: Why Functioning Distractors Matter

    ERIC Educational Resources Information Center

    Ali, Syed Haris; Carr, Patrick A.; Ruit, Kenneth G.

    2016-01-01

    Plausible distractors are important for accurate measurement of knowledge via multiple-choice questions (MCQs). This study demonstrates the impact of higher distractor functioning on validity and reliability of scores obtained on MCQs. Freeresponse (FR) and MCQ versions of a neurohistology practice exam were given to four cohorts of Year 1 medical…

  20. The Accessibility, Usability, and Reliability of Chinese Web-Based Information on HIV/AIDS.

    PubMed

    Niu, Lu; Luo, Dan; Liu, Ying; Xiao, Shuiyuan

    2016-08-20

    The present study was designed to assess the quality of Chinese-language Internet-based information on HIV/AIDS. We entered the following search terms, in Chinese, into Baidu and Sogou: "HIV/AIDS", "symptoms", and "treatment", and evaluated the first 50 hits of each query using the Minervation validation instrument (LIDA tool) and DISCERN instrument. Of the 900 hits identified, 85 websites were included in this study. The overall score of the LIDA tool was 63.7%; the mean score of accessibility, usability, and reliability was 82.2%, 71.5%, and 27.3%, respectively. Of the top 15 sites according to the LIDA score, the mean DISCERN score was calculated at 43.1 (95% confidence intervals (CI) = 37.7-49.5). Noncommercial websites showed higher DISCERN scores than commercial websites; whereas commercial websites were more likely to be found in the first 20 links obtained from each search engine than the noncommercial websites. In general, the HIV/AIDS related Chinese-language websites have poor reliability, although their accessibility and usability are fair. In addition, the treatment information presented on Chinese-language websites is far from sufficient. There is an imperative need for professionals and specialized institutes to improve the comprehensiveness of web-based information related to HIV/AIDS.

  1. 21 CFR 20.109 - Data and information obtained by contract.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Data and information obtained by contract. 20.109... GENERAL PUBLIC INFORMATION Availability of Specific Categories of Records § 20.109 Data and information obtained by contract. (a) All data and information obtained by the Food and Drug Administration by contract...

  2. 48 CFR 9.105-1 - Obtaining information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... the responsibility of prospective contractors, including requesting preaward surveys when necessary..., especially when research and development is involved, the contracting officer may obtain this information... information concerning (i) the low bidder or (ii) those offerors in range for award. (2) Preaward surveys...

  3. 48 CFR 9.105-1 - Obtaining information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... the responsibility of prospective contractors, including requesting preaward surveys when necessary..., especially when research and development is involved, the contracting officer may obtain this information... information concerning (i) the low bidder or (ii) those offerors in range for award. (2) Preaward surveys...

  4. 48 CFR 9.105-1 - Obtaining information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... the responsibility of prospective contractors, including requesting preaward surveys when necessary..., especially when research and development is involved, the contracting officer may obtain this information... information concerning (i) the low bidder or (ii) those offerors in range for award. (2) Preaward surveys...

  5. 48 CFR 9.105-1 - Obtaining information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... information required concerning the adequacy of prospective contractors' accounting systems and these systems... accounting systems, and these systems' suitability for use in administering the proposed type of contract. (3... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Obtaining information. 9...

  6. Estimation of Reliability Coefficients Using the Test Information Function and Its Modifications.

    ERIC Educational Resources Information Center

    Samejima, Fumiko

    1994-01-01

    The reliability coefficient is predicted from the test information function (TIF) or two modified TIF formulas and a specific trait distribution. Examples illustrate the variability of the reliability coefficient across different trait distributions, and results are compared with empirical reliability coefficients. (SLD)

  7. Great apes are sensitive to prior reliability of an informant in a gaze following task.

    PubMed

    Schmid, Benjamin; Karg, Katja; Perner, Josef; Tomasello, Michael

    2017-01-01

    Social animals frequently rely on information from other individuals. This can be costly in case the other individual is mistaken or even deceptive. Human infants below 4 years of age show proficiency in their reliance on differently reliable informants. They can infer the reliability of an informant from few interactions and use that assessment in later interactions with the same informant in a different context. To explore whether great apes share that ability, in our study we confronted great apes with a reliable or unreliable informant in an object choice task, to see whether that would in a subsequent task affect their gaze following behaviour in response to the same informant. In our study, prior reliability of the informant and habituation during the gaze following task affected both great apes' automatic gaze following response and their more deliberate response of gaze following behind barriers. As habituation is very context specific, it is unlikely that habituation in the reliability task affected the gaze following task. Rather it seems that apes employ a reliability tracking strategy that results in a general avoidance of additional information from an unreliable informant.

  8. Reliability of information on people with disabilities gathered by community health workers in highly consanguineous communities of Northeastern Brazil.

    PubMed

    Lopes, Fernando Rocha Lucena; Monteiro, Karolinne Souza; Figueiredo, Thalita; Wanderley, Thyago da Costa; Pequeno, Thiago de Almeida; Lima, Shirley; Santos, Silvana

    2017-05-02

    In Brazil, community health workers have gathered monthly information on people with disabilities to maintain the Primary Care Information System since 1998; however, few studies have used this database for scientific or public health policy purposes. This study aimed to evaluate the reliability of information on people with disabilities gathered by community health workers in primary care services. This was a cross-sectional population-based study conducted in two highly consanguineous communities, involving a population of 18,458 inhabitants in Northeastern Brazil. To study the prevalence of people with disabilities, estimations performed by health workers were compared with those obtained by researchers who interviewed 15.6% of the total population. To study the agreement of the information, data on 106 people with disabilities completed independently by researchers and health workers were compared to evaluate the degree of agreement for 28 variables analysed. Kappa statistics (κ) were used to calculate the inter-rater agreement. The prevalence of disability estimated by community health workers was 3.01 and 2.00% for city A and B, respectively, while the percentages obtained by researchers were 6.72 and 5.65%, respectively, showing an underestimation of prevalence according to community health workers. The Kappa index value obtained for all data analysed (2,589 items excluding losses) was 0.808 (p < 0.01), indicating an almost perfect consistency of information collected by health workers compared to by researchers. Community health workers collected information with a high degree of reliability, although the identification of the prevalence of disabled individuals was potentially impaired due to the work process.

  9. The Accessibility, Usability, and Reliability of Chinese Web-Based Information on HIV/AIDS

    PubMed Central

    Niu, Lu; Luo, Dan; Liu, Ying; Xiao, Shuiyuan

    2016-01-01

    Objective: The present study was designed to assess the quality of Chinese-language Internet-based information on HIV/AIDS. Methods: We entered the following search terms, in Chinese, into Baidu and Sogou: “HIV/AIDS”, “symptoms”, and “treatment”, and evaluated the first 50 hits of each query using the Minervation validation instrument (LIDA tool) and DISCERN instrument. Results: Of the 900 hits identified, 85 websites were included in this study. The overall score of the LIDA tool was 63.7%; the mean score of accessibility, usability, and reliability was 82.2%, 71.5%, and 27.3%, respectively. Of the top 15 sites according to the LIDA score, the mean DISCERN score was calculated at 43.1 (95% confidence intervals (CI) = 37.7–49.5). Noncommercial websites showed higher DISCERN scores than commercial websites; whereas commercial websites were more likely to be found in the first 20 links obtained from each search engine than the noncommercial websites. Conclusions: In general, the HIV/AIDS related Chinese-language websites have poor reliability, although their accessibility and usability are fair. In addition, the treatment information presented on Chinese-language websites is far from sufficient. There is an imperative need for professionals and specialized institutes to improve the comprehensiveness of web-based information related to HIV/AIDS. PMID:27556475

  10. 19 CFR 201.9 - Methods employed in obtaining information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 3 2014-04-01 2014-04-01 false Methods employed in obtaining information. 201.9 Section 201.9 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Initiation and Conduct of Investigations § 201.9 Methods employed in obtaining information. In...

  11. 19 CFR 201.9 - Methods employed in obtaining information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 3 2013-04-01 2013-04-01 false Methods employed in obtaining information. 201.9 Section 201.9 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Initiation and Conduct of Investigations § 201.9 Methods employed in obtaining information. In...

  12. Obtaining information by dynamic (effortful) touching

    PubMed Central

    Turvey, M. T.; Carello, Claudia

    2011-01-01

    Dynamic touching is effortful touching. It entails deformation of muscles and fascia and activation of the embedded mechanoreceptors, as when an object is supported and moved by the body. It is realized as exploratory activities that can vary widely in spatial and temporal extents (a momentary heft, an extended walk). Research has revealed the potential of dynamic touching for obtaining non-visual information about the body (e.g. limb orientation), attachments to the body (e.g. an object's height and width) and the relation of the body both to attachments (e.g. hand's location on a grasped object) and surrounding surfaces (e.g. places and their distances). Invariants over the exploratory activity (e.g. moments of a wielded object's mass distribution) seem to ground this ‘information about’. The conception of a haptic medium as a nested tensegrity structure has been proposed to express the obtained information realized by myofascia deformation, by its invariants and transformations. The tensegrity proposal rationalizes the relative indifference of dynamic touch to the site of mechanical contact (hand, foot, torso or probe) and the overtness of exploratory activity. It also provides a framework for dynamic touching's fractal nature, and the finding that its degree of fractality may matter to its accomplishments. PMID:21969694

  13. Agreement, the F-Measure, and Reliability in Information Retrieval

    PubMed Central

    Hripcsak, George; Rothschild, Adam S.

    2005-01-01

    Information retrieval studies that involve searching the Internet or marking phrases usually lack a well-defined number of negative cases. This prevents the use of traditional interrater reliability metrics like the κ statistic to assess the quality of expert-generated gold standards. Such studies often quantify system performance as precision, recall, and F-measure, or as agreement. It can be shown that the average F-measure among pairs of experts is numerically identical to the average positive specific agreement among experts and that κ approaches these measures as the number of negative cases grows large. Positive specific agreement—or the equivalent F-measure—may be an appropriate way to quantify interrater reliability and therefore to assess the reliability of a gold standard in these studies. PMID:15684123

  14. Social Information Is Integrated into Value and Confidence Judgments According to Its Reliability.

    PubMed

    De Martino, Benedetto; Bobadilla-Suarez, Sebastian; Nouguchi, Takao; Sharot, Tali; Love, Bradley C

    2017-06-21

    How much we like something, whether it be a bottle of wine or a new film, is affected by the opinions of others. However, the social information that we receive can be contradictory and vary in its reliability. Here, we tested whether the brain incorporates these statistics when judging value and confidence. Participants provided value judgments about consumer goods in the presence of online reviews. We found that participants updated their initial value and confidence judgments in a Bayesian fashion, taking into account both the uncertainty of their initial beliefs and the reliability of the social information. Activity in dorsomedial prefrontal cortex tracked the degree of belief update. Analogous to how lower-level perceptual information is integrated, we found that the human brain integrates social information according to its reliability when judging value and confidence. SIGNIFICANCE STATEMENT The field of perceptual decision making has shown that the sensory system integrates different sources of information according to their respective reliability, as predicted by a Bayesian inference scheme. In this work, we hypothesized that a similar coding scheme is implemented by the human brain to process social signals and guide complex, value-based decisions. We provide experimental evidence that the human prefrontal cortex's activity is consistent with a Bayesian computation that integrates social information that differs in reliability and that this integration affects the neural representation of value and confidence. Copyright © 2017 De Martino et al.

  15. National Practice Patterns of Obtaining Informed Consent for Stroke Thrombolysis.

    PubMed

    Mendelson, Scott J; Courtney, D Mark; Gordon, Elisa J; Thomas, Leena F; Holl, Jane L; Prabhakaran, Shyam

    2018-03-01

    No standard approach to obtaining informed consent for stroke thrombolysis with tPA (tissue-type plasminogen activator) currently exists. We aimed to assess current nationwide practice patterns of obtaining informed consent for tPA. An online survey was developed and distributed by e-mail to clinicians involved in acute stroke care. Multivariable logistic regression analyses were performed to determine independent factors contributing to always obtaining informed consent for tPA. Among 268 respondents, 36.7% reported always obtaining informed consent and 51.8% reported the informed consent process caused treatment delays. Being an emergency medicine physician (odds ratio, 5.8; 95% confidence interval, 2.9-11.5) and practicing at a nonacademic medical center (odds ratio, 2.1; 95% confidence interval, 1.0-4.3) were independently associated with always requiring informed consent. The most commonly cited cause of delay was waiting for a patient's family to reach consensus about treatment. Most clinicians always or often require informed consent for stroke thrombolysis. Future research should focus on standardizing content and delivery of tPA information to reduce delays. © 2018 American Heart Association, Inc.

  16. The number of measurements needed to obtain high reliability for traits related to enzymatic activities and photosynthetic compounds in soybean plants infected with Phakopsora pachyrhizi.

    PubMed

    Oliveira, Tássia Boeno de; Azevedo Peixoto, Leonardo de; Teodoro, Paulo Eduardo; Alvarenga, Amauri Alves de; Bhering, Leonardo Lopes; Campo, Clara Beatriz Hoffmann

    2018-01-01

    Asian rust affects the physiology of soybean plants and causes losses in yield. Repeatability coefficients may help breeders to know how many measurements are needed to obtain a suitable reliability for a target trait. Therefore, the objectives of this study were to determine the repeatability coefficients of 14 traits in soybean plants inoculated with Phakopsora pachyrhizi and to establish the minimum number of measurements needed to predict the breeding value with high accuracy. Experiments were performed in a 3x2 factorial arrangement with three treatments and two inoculations in a random block design. Repeatability coefficients, coefficients of determination and number of measurements needed to obtain a certain reliability were estimated using ANOVA, principal component analysis based on the covariance matrix and the correlation matrix, structural analysis and mixed model. It was observed that the principal component analysis based on the covariance matrix out-performed other methods for almost all traits. Significant differences were observed for all traits except internal CO2 concentration for the treatment effects. For the measurement effects, all traits were significantly different. In addition, significant differences were found for all Treatment x Measurement interaction traits except coumestrol, chitinase and chlorophyll content. Six measurements were suitable to obtain a coefficient of determination higher than 0.7 for all traits based on principal component analysis. The information obtained from this research will help breeders and physiologists determine exactly how many measurements are needed to evaluate each trait in soybean plants infected by P. pachyrhizi with a desirable reliability.

  17. The number of measurements needed to obtain high reliability for traits related to enzymatic activities and photosynthetic compounds in soybean plants infected with Phakopsora pachyrhizi

    PubMed Central

    de Oliveira, Tássia Boeno; Teodoro, Paulo Eduardo; de Alvarenga, Amauri Alves; Bhering, Leonardo Lopes; Campo, Clara Beatriz Hoffmann

    2018-01-01

    Asian rust affects the physiology of soybean plants and causes losses in yield. Repeatability coefficients may help breeders to know how many measurements are needed to obtain a suitable reliability for a target trait. Therefore, the objectives of this study were to determine the repeatability coefficients of 14 traits in soybean plants inoculated with Phakopsora pachyrhizi and to establish the minimum number of measurements needed to predict the breeding value with high accuracy. Experiments were performed in a 3x2 factorial arrangement with three treatments and two inoculations in a random block design. Repeatability coefficients, coefficients of determination and number of measurements needed to obtain a certain reliability were estimated using ANOVA, principal component analysis based on the covariance matrix and the correlation matrix, structural analysis and mixed model. It was observed that the principal component analysis based on the covariance matrix out-performed other methods for almost all traits. Significant differences were observed for all traits except internal CO2 concentration for the treatment effects. For the measurement effects, all traits were significantly different. In addition, significant differences were found for all Treatment x Measurement interaction traits except coumestrol, chitinase and chlorophyll content. Six measurements were suitable to obtain a coefficient of determination higher than 0.7 for all traits based on principal component analysis. The information obtained from this research will help breeders and physiologists determine exactly how many measurements are needed to evaluate each trait in soybean plants infected by P. pachyrhizi with a desirable reliability. PMID:29438380

  18. 28 CFR 51.38 - Obtaining information from others.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Obtaining information from others. 51.38 Section 51.38 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) PROCEDURES FOR THE ADMINISTRATION OF SECTION 5 OF THE VOTING RIGHTS ACT OF 1965, AS AMENDED Processing of Submissions § 51.38 Obtaining...

  19. 28 CFR 51.38 - Obtaining information from others.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Obtaining information from others. 51.38 Section 51.38 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) PROCEDURES FOR THE ADMINISTRATION OF SECTION 5 OF THE VOTING RIGHTS ACT OF 1965, AS AMENDED Processing of Submissions § 51.38 Obtaining...

  20. 48 CFR 1809.505-4 - Obtaining access to sensitive information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Obtaining access to sensitive information. 1809.505-4 Section 1809.505-4 Federal Acquisition Regulations System NATIONAL... Organizational and Consultant Conflicts of Interest 1809.505-4 Obtaining access to sensitive information. (b) In...

  1. Extracting More Information from Passive Optical Tracking Observations for Reliable Orbit Element Generation

    NASA Astrophysics Data System (ADS)

    Bennett, J.; Gehly, S.

    2016-09-01

    This paper presents results from a preliminary method for extracting more orbital information from low rate passive optical tracking data. An improvement in the accuracy of the observation data yields more accurate and reliable orbital elements. A comparison between the orbit propagations from the orbital element generated using the new data processing method is compared with the one generated from the raw observation data for several objects. Optical tracking data collected by EOS Space Systems, located on Mount Stromlo, Australia, is fitted to provide a new orbital element. The element accuracy is determined from a comparison between the predicted orbit and subsequent tracking data or reference orbit if available. The new method is shown to result in a better orbit prediction which has important implications in conjunction assessments and the Space Environment Research Centre space object catalogue. The focus is on obtaining reliable orbital solutions from sparse data. This work forms part of the collaborative effort of the Space Environment Management Cooperative Research Centre which is developing new technologies and strategies to preserve the space environment (www.serc.org.au).

  2. Reliability and Validity of Curriculum-Based Informal Reading Inventories.

    ERIC Educational Resources Information Center

    Fuchs, Lynn; And Others

    A study was conducted to explore the reliability and validity of three prominent procedures used in informal reading inventories (IRIs): (1) choosing a 95% word recognition accuracy standard for determining student instructional level, (2) arbitrarily selecting a passage to represent the difficulty level of a basal reader, and (3) employing…

  3. Accuracy and reliability of Chile's National Air Quality Information System for measuring particulate matter: Beta attenuation monitoring issue.

    PubMed

    Toro A, Richard; Campos, Claudia; Molina, Carolina; Morales S, Raul G E; Leiva-Guzmán, Manuel A

    2015-09-01

    A critical analysis of Chile's National Air Quality Information System (NAQIS) is presented, focusing on particulate matter (PM) measurement. This paper examines the complexity, availability and reliability of monitoring station information, the implementation of control systems, the quality assurance protocols of the monitoring station data and the reliability of the measurement systems in areas highly polluted by particulate matter. From information available on the NAQIS website, it is possible to confirm that the PM2.5 (PM10) data available on the site correspond to 30.8% (69.2%) of the total information available from the monitoring stations. There is a lack of information regarding the measurement systems used to quantify air pollutants, most of the available data registers contain gaps, almost all of the information is categorized as "preliminary information" and neither standard operating procedures (operational and validation) nor assurance audits or quality control of the measurements are reported. In contrast, events that cause saturation of the monitoring detectors located in northern and southern Chile have been observed using beta attenuation monitoring. In these cases, it can only be concluded that the PM content is equal to or greater than the saturation concentration registered by the monitors and that the air quality indexes obtained from these measurements are underestimated. This occurrence has been observed in 12 (20) public and private stations where PM2.5 (PM10) is measured. The shortcomings of the NAQIS data have important repercussions for the conclusions obtained from the data and for how the data are used. However, these issues represent opportunities for improving the system to widen its use, incorporate comparison protocols between equipment, install new stations and standardize the control system and quality assurance. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. The Reliability of Informal Reading Inventories: What Has Changed?

    ERIC Educational Resources Information Center

    Nilsson, Nina L.

    2013-01-01

    Over time, criticisms related to the technical rigor of informal reading inventories (IRIs) have led many to question using these assessment instruments for high- or low-stakes purposes. In this article, I examine reliability evidence reported in 11 new and updated IRIs and make comparisons with Spector's earlier analysis that revealed fewer than…

  5. Laboratory Information Management System Chain of Custody: Reliability and Security

    PubMed Central

    Tomlinson, J. J.; Elliott-Smith, W.; Radosta, T.

    2006-01-01

    A chain of custody (COC) is required in many laboratories that handle forensics, drugs of abuse, environmental, clinical, and DNA testing, as well as other laboratories that want to assure reliability of reported results. Maintaining a dependable COC can be laborious, but with the recent establishment of the criteria for electronic records and signatures by US regulatory agencies, laboratory information management systems (LIMSs) are now being developed to fully automate COCs. The extent of automation and of data reliability can vary, and FDA- and EPA-compliant electronic signatures and system security are rare. PMID:17671623

  6. 12 CFR 1202.3 - What information can I obtain through FOIA?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false What information can I obtain through FOIA? 1202.3 Section 1202.3 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ORGANIZATION AND OPERATIONS FREEDOM OF INFORMATION ACT § 1202.3 What information can I obtain through FOIA? (a) General. FHFA...

  7. The poor quality and reliability of information on periacetabular osteotomy on the internet in Japan.

    PubMed

    Takegami, Yasuhiko; Seki, Taisuke; Amano, Takafumi; Higuchi, Yoshitoshi; Komatsu, Daigo; Nishida, Yoshihiro; Ishiguro, Naoki

    2017-08-01

    Although many patients use the internet to access health-related information, the quality and the reliability of the information is highly inconsistent. Periacetabular osteotomy (PAO) is one of the surgical procedures for hip dysplasia. However, medical information on PAO is limited on the internet. This study aims to evaluate the quality and reliability of information available on PAO on the internet in Japan. A web search was conducted on two search engines for the following terms: "hip osteotomy," "pelvic osteotomy," and "osteotomy for hip preservation" in Japanese. In total, we found 120 websites. To determine the quality and reliability of information on each website, we used the Health on the Net Foundation (HON) score, the Brief DISCERN score, and an osteotomy-specific content (OSC) score. After eliminating duplicate websites, we reviewed 49 unique websites. Only three websites (6.1%) had good reliability, as indicated by their HON scores. Twelve websites (24.4%) had good-quality information, as measured by their Brief DISCERN scores. As evaluated by their OSC scores, physician websites were found to be biased toward etiology and surgical indication and did not provide information on the complications of procedures. Non-physician websites were generally insufficient. The information about PAO on the internet is, therefore, unreliable and of poor-quality for Japanese patients.

  8. Obtaining reliable phase-gradient delays from otoacoustic emission data.

    PubMed

    Shera, Christopher A; Bergevin, Christopher

    2012-08-01

    Reflection-source otoacoustic emission phase-gradient delays are widely used to obtain noninvasive estimates of cochlear function and properties, such as the sharpness of mechanical tuning and its variation along the length of the cochlear partition. Although different data-processing strategies are known to yield different delay estimates and trends, their relative reliability has not been established. This paper uses in silico experiments to evaluate six methods for extracting delay trends from reflection-source otoacoustic emissions (OAEs). The six methods include both previously published procedures (e.g., phase smoothing, energy-weighting, data exclusion based on signal-to-noise ratio) and novel strategies (e.g., peak-picking, all-pass factorization). Although some of the methods perform well (e.g., peak-picking), others introduce substantial bias (e.g., phase smoothing) and are not recommended. In addition, since standing waves caused by multiple internal reflection can complicate the interpretation and compromise the application of OAE delays, this paper develops and evaluates two promising signal-processing strategies, the first based on time-frequency filtering using the continuous wavelet transform and the second on cepstral analysis, for separating the direct emission from its subsequent reflections. Altogether, the results help to resolve previous disagreements about the frequency dependence of human OAE delays and the sharpness of cochlear tuning while providing useful analysis methods for future studies.

  9. Dental measurements and Bolton index reliability and accuracy obtained from 2D digital, 3D segmented CBCT, and 3d intraoral laser scanner

    PubMed Central

    San José, Verónica; Bellot-Arcís, Carlos; Tarazona, Beatriz; Zamora, Natalia; O Lagravère, Manuel

    2017-01-01

    Background To compare the reliability and accuracy of direct and indirect dental measurements derived from two types of 3D virtual models: generated by intraoral laser scanning (ILS) and segmented cone beam computed tomography (CBCT), comparing these with a 2D digital model. Material and Methods One hundred patients were selected. All patients’ records included initial plaster models, an intraoral scan and a CBCT. Patients´ dental arches were scanned with the iTero® intraoral scanner while the CBCTs were segmented to create three-dimensional models. To obtain 2D digital models, plaster models were scanned using a conventional 2D scanner. When digital models had been obtained using these three methods, direct dental measurements were measured and indirect measurements were calculated. Differences between methods were assessed by means of paired t-tests and regression models. Intra and inter-observer error were analyzed using Dahlberg´s d and coefficients of variation. Results Intraobserver and interobserver error for the ILS model was less than 0.44 mm while for segmented CBCT models, the error was less than 0.97 mm. ILS models provided statistically and clinically acceptable accuracy for all dental measurements, while CBCT models showed a tendency to underestimate measurements in the lower arch, although within the limits of clinical acceptability. Conclusions ILS and CBCT segmented models are both reliable and accurate for dental measurements. Integration of ILS with CBCT scans would get dental and skeletal information altogether. Key words:CBCT, intraoral laser scanner, 2D digital models, 3D models, dental measurements, reliability. PMID:29410764

  10. Methods for Calculating Frequency of Maintenance of Complex Information Security System Based on Dynamics of Its Reliability

    NASA Astrophysics Data System (ADS)

    Varlataya, S. K.; Evdokimov, V. E.; Urzov, A. Y.

    2017-11-01

    This article describes a process of calculating a certain complex information security system (CISS) reliability using the example of the technospheric security management model as well as ability to determine the frequency of its maintenance using the system reliability parameter which allows one to assess man-made risks and to forecast natural and man-made emergencies. The relevance of this article is explained by the fact the CISS reliability is closely related to information security (IS) risks. Since reliability (or resiliency) is a probabilistic characteristic of the system showing the possibility of its failure (and as a consequence - threats to the protected information assets emergence), it is seen as a component of the overall IS risk in the system. As it is known, there is a certain acceptable level of IS risk assigned by experts for a particular information system; in case of reliability being a risk-forming factor maintaining an acceptable risk level should be carried out by the routine analysis of the condition of CISS and its elements and their timely service. The article presents a reliability parameter calculation for the CISS with a mixed type of element connection, a formula of the dynamics of such system reliability is written. The chart of CISS reliability change is a S-shaped curve which can be divided into 3 periods: almost invariable high level of reliability, uniform reliability reduction, almost invariable low level of reliability. Setting the minimum acceptable level of reliability, the graph (or formula) can be used to determine the period of time during which the system would meet requirements. Ideally, this period should not be longer than the first period of the graph. Thus, the proposed method of calculating the CISS maintenance frequency helps to solve a voluminous and critical task of the information assets risk management.

  11. The Impact of Third-Party Information on Trust: Valence, Source, and Reliability

    PubMed Central

    2016-01-01

    Economic exchange between strangers happens extremely frequently due to the growing number of internet transactions. In trust situations like online transactions, a trustor usually does not know whether she encounters a trustworthy trustee. However, the trustor might form beliefs about the trustee's trustworthiness by relying on third-party information. Different kinds of third-party information can vary dramatically in their importance to the trustor. We ran a factorial design to study how the different characteristics of third-party information affect the trustor’s decision to trust. We systematically varied unregulated third-party information regarding the source (friend or a stranger), the reliability (gossip or experiences), and the valence (positive or negative) of the information. The results show that negative information is more salient for withholding trust than positive information is for placing trust. If third-party information is positive, experience of a friend has the strongest effect on trusting followed by friend’s gossip. Positive information from a stranger does not matter to the trustor. With respect to negative information, the data show that even the slightest hint of an untrustworthy trustee leads to significantly less placed trust irrespective of the source or the reliability of the information. PMID:26882013

  12. The poor quality and reliability of information on periacetabular osteotomy on the internet in Japan

    PubMed Central

    Takegami, Yasuhiko; Seki, Taisuke; Amano, Takafumi; Higuchi, Yoshitoshi; Komatsu, Daigo; Nishida, Yoshihiro; Ishiguro, Naoki

    2017-01-01

    ABSTRACT Although many patients use the internet to access health-related information, the quality and the reliability of the information is highly inconsistent. Periacetabular osteotomy (PAO) is one of the surgical procedures for hip dysplasia. However, medical information on PAO is limited on the internet. This study aims to evaluate the quality and reliability of information available on PAO on the internet in Japan. A web search was conducted on two search engines for the following terms: “hip osteotomy,” “pelvic osteotomy,” and “osteotomy for hip preservation” in Japanese. In total, we found 120 websites. To determine the quality and reliability of information on each website, we used the Health on the Net Foundation (HON) score, the Brief DISCERN score, and an osteotomy-specific content (OSC) score. After eliminating duplicate websites, we reviewed 49 unique websites. Only three websites (6.1%) had good reliability, as indicated by their HON scores. Twelve websites (24.4%) had good-quality information, as measured by their Brief DISCERN scores. As evaluated by their OSC scores, physician websites were found to be biased toward etiology and surgical indication and did not provide information on the complications of procedures. Non-physician websites were generally insufficient. The information about PAO on the internet is, therefore, unreliable and of poor-quality for Japanese patients. PMID:28878442

  13. Health On the Net's 20 Years of Transparent and Reliable Health Information.

    PubMed

    Boyer, Célia; Appel, Ron D; Ball, Marion J; van Bemmel, Jan H; Bergmans, Jean-Paul; Carpentier, Michel; Hochstrasser, Denis; Lindberg, Donald; Miller, Randolph; Peterschmitt, Jean-Claude; Safran, Charlie; Thonnet, Michèle; Geissbühler, Antoine

    2016-01-01

    The Health On the Net Foundation (HON) was born in 1996, during the beginning of the World Wide Web, from a collective decision by health specialists, led by the late Jean-Raoul Scherrer, who anticipated the need for online trustworthy health information. Because the Internet is a free space that everyone shares, a search for quality information is like a shot in the dark: neither will reliably hit their target. Thus, HON was created to promote deployment of useful and reliable online health information, and to enable its appropriate and efficient use. Two decades on, HON is the oldest and most valued quality marker for online health information. The organization has maintained its reputation through dynamic measures, innovative endeavors and dedication to upholding key values and goals. This paper provides an overview of the HON Foundation, and its activities, challenges, and achievements over the years.

  14. 48 CFR 1509.505-4 - Obtaining access to proprietary information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... PROTECTION AGENCY ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Organizational Conflicts of Interests 1509.505-4 Obtaining access to proprietary information. Contractors gaining access to confidential business... business information. ...

  15. Reliability of Scores Obtained from Self-, Peer-, and Teacher-Assessments on Teaching Materials Prepared by Teacher Candidates

    ERIC Educational Resources Information Center

    Nalbantoglu Yilmaz, Funda

    2017-01-01

    This study aims to determine the reliability of scores obtained from self-, peer-, and teacher-assessments in terms of teaching materials prepared by teacher candidates. The study group of this research constitutes 56 teacher candidates. In the scope of research, teacher candidates were asked to develop teaching material related to their study.…

  16. [Osteosarcoma: reliability and quality of the information in the internet].

    PubMed

    Schippinger, Michael; Ruckenstuhl, Paul; Friesenbichler, Jörg; Leithner, Andreas

    2014-09-01

    The World Wide Web has grown during the last years to a considerable source of medical information for experts as well as for laymen and patients. The quality of this information is subjected to some limitation linked with the structure of the Internet and the management of Internet pages. The cross- sectional study presented evaluates and compares quality and reliability of information with respect of osteosarcoma in the most common German-language Internet pages for medical information. As both, one of the most common primary malignant bone tumors and its peak of incidence at the age of childhood and youth, osteosarcoma is considered of significant importance in orthopedic oncology.

  17. The predictive information obtained by testing multiple software versions

    NASA Technical Reports Server (NTRS)

    Lee, Larry D.

    1987-01-01

    Multiversion programming is a redundancy approach to developing highly reliable software. In applications of this method, two or more versions of a program are developed independently by different programmers and the versions are combined to form a redundant system. One variation of this approach consists of developing a set of n program versions and testing the versions to predict the failure probability of a particular program or a system formed from a subset of the programs. The precision that might be obtained, and also the effect of programmer variability if predictions are made over repetitions of the process of generating different program versions, are examined.

  18. Improving Metrological Reliability of Information-Measuring Systems Using Mathematical Modeling of Their Metrological Characteristics

    NASA Astrophysics Data System (ADS)

    Kurnosov, R. Yu; Chernyshova, T. I.; Chernyshov, V. N.

    2018-05-01

    The algorithms for improving the metrological reliability of analogue blocks of measuring channels and information-measuring systems are developed. The proposed algorithms ensure the optimum values of their metrological reliability indices for a given analogue circuit block solution.

  19. Reliability and validity of pendulum test measures of spasticity obtained with the Polhemus tracking system from patients with chronic stroke.

    PubMed

    Bohannon, Richard W; Harrison, Steven; Kinsella-Shaw, Jeffrey

    2009-07-30

    Spasticity is a common impairment accompanying stroke. Spasticity of the quadriceps femoris muscle can be quantified using the pendulum test. The measurement properties of pendular kinematics captured using a magnetic tracking system has not been studied among patients who have experienced a stroke. Therefore, this study describes the test-retest reliability and known groups and convergent validity of the pendulum test measures obtained with the Polhemus tracking system. Eight patients with chronic stroke underwent pendulum tests with their affected and unaffected lower limbs, with and without the addition of a 2.2 kg cuff weight at the ankle, using the Polhemus magnetic tracking system. Also measured bilaterally were knee resting angles, Ashworth scores (grades 0-4) of quadriceps femoris muscles, patellar tendon (knee jerk) reflexes (grades 0-4), and isometric knee extension force. Three measures obtained from pendular traces of the affected side were reliable (intraclass correlation coefficient > or = .844). Known groups validity was confirmed by demonstration of a significant difference in the measurements between sides. Convergent validity was supported by correlations > or = .57 between pendulum test measures and other measures reflective of spasticity. Pendulum test measures obtained with the Polhemus tracking system from the affected side of patients with stroke have good test-retest reliability and both known groups and convergent validity.

  20. Evaluating Written Patient Information for Eczema in German: Comparing the Reliability of Two Instruments, DISCERN and EQIP

    PubMed Central

    McCool, Megan E.; Wahl, Josepha; Schlecht, Inga; Apfelbacher, Christian

    2015-01-01

    Patients actively seek information about how to cope with their health problems, but the quality of the information available varies. A number of instruments have been developed to assess the quality of patient information, primarily though in English. Little is known about the reliability of these instruments when applied to patient information in German. The objective of our study was to investigate and compare the reliability of two validated instruments, DISCERN and EQIP, in order to determine which of these instruments is better suited for a further study pertaining to the quality of information available to German patients with eczema. Two independent raters evaluated a random sample of 20 informational brochures in German. All the brochures addressed eczema as a disorder and/or therapy options and care. Intra-rater and inter-rater reliability were assessed by calculating intra-class correlation coefficients, agreement was tested with weighted kappas, and the correlation of the raters’ scores for each instrument was measured with Pearson’s correlation coefficient. DISCERN demonstrated substantial intra- and inter-rater reliability. It also showed slightly better agreement than EQIP. There was a strong correlation of the raters’ scores for both instruments. The findings of this study support the reliability of both DISCERN and EQIP. However, based on the results of the inter-rater reliability, agreement and correlation analyses, we consider DISCERN to be the more precise tool for our project on patient information concerning the treatment and care of eczema. PMID:26440612

  1. Evaluating Written Patient Information for Eczema in German: Comparing the Reliability of Two Instruments, DISCERN and EQIP.

    PubMed

    McCool, Megan E; Wahl, Josepha; Schlecht, Inga; Apfelbacher, Christian

    2015-01-01

    Patients actively seek information about how to cope with their health problems, but the quality of the information available varies. A number of instruments have been developed to assess the quality of patient information, primarily though in English. Little is known about the reliability of these instruments when applied to patient information in German. The objective of our study was to investigate and compare the reliability of two validated instruments, DISCERN and EQIP, in order to determine which of these instruments is better suited for a further study pertaining to the quality of information available to German patients with eczema. Two independent raters evaluated a random sample of 20 informational brochures in German. All the brochures addressed eczema as a disorder and/or therapy options and care. Intra-rater and inter-rater reliability were assessed by calculating intra-class correlation coefficients, agreement was tested with weighted kappas, and the correlation of the raters' scores for each instrument was measured with Pearson's correlation coefficient. DISCERN demonstrated substantial intra- and inter-rater reliability. It also showed slightly better agreement than EQIP. There was a strong correlation of the raters' scores for both instruments. The findings of this study support the reliability of both DISCERN and EQIP. However, based on the results of the inter-rater reliability, agreement and correlation analyses, we consider DISCERN to be the more precise tool for our project on patient information concerning the treatment and care of eczema.

  2. Reliability of the measures of weight-bearing distribution obtained during quiet stance by digital scales in subjects with and without hemiparesis.

    PubMed

    de Araujo-Barbosa, Paulo Henrique Ferreira; de Menezes, Lidiane Teles; Costa, Abraão Souza; Couto Paz, Clarissa Cardoso Dos Santos; Fachin-Martins, Emerson

    2015-05-01

    Described as an alternative way of assessing weight-bearing asymmetries, the measures obtained from digital scales have been used as an index to classify weight-bearing distribution. This study aimed to describe the intra-test and the test/retest reliability of measures in subjects with and without hemiparesis during quiet stance. The percentage of body weight borne by one limb was calculated for a sample of subjects with hemiparesis and for a control group that was matched by gender and age. A two-way analysis of variance was used to verify the intra-test reliability. This analysis was calculated using the differences between the averages of the measures obtained during single, double or triple trials. The intra-class correlation coefficient (ICC) was utilized and data plotted using the Bland-Altman method. The intra-test analysis showed significant differences, only observed in the hemiparesis group, between the measures obtained by single and triple trials. Excellent and moderate ICC values (0.69-0.84) between test and retest were observed in the hemiparesis group, while for control groups ICC values (0.41-0.74) were classified as moderate, progressing from almost poor for measures obtained by a single trial to almost excellent for those obtained by triple trials. In conclusion, good reliability ranging from moderate to excellent classifications was found for participants with and without hemiparesis. Moreover, an improvement of the repeatability was observed with fewer trials for participants with hemiparesis, and with more trials for participants without hemiparesis.

  3. 21 CFR 20.109 - Data and information obtained by contract.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Data and information obtained by contract. 20.109 Section 20.109 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PUBLIC INFORMATION Availability of Specific Categories of Records § 20.109 Data and information...

  4. Reliability of fish size estimates obtained from multibeam imaging sonar

    USGS Publications Warehouse

    Hightower, Joseph E.; Magowan, Kevin J.; Brown, Lori M.; Fox, Dewayne A.

    2013-01-01

    Multibeam imaging sonars have considerable potential for use in fisheries surveys because the video-like images are easy to interpret, and they contain information about fish size, shape, and swimming behavior, as well as characteristics of occupied habitats. We examined images obtained using a dual-frequency identification sonar (DIDSON) multibeam sonar for Atlantic sturgeon Acipenser oxyrinchus oxyrinchus, striped bass Morone saxatilis, white perch M. americana, and channel catfish Ictalurus punctatus of known size (20–141 cm) to determine the reliability of length estimates. For ranges up to 11 m, percent measurement error (sonar estimate – total length)/total length × 100 varied by species but was not related to the fish's range or aspect angle (orientation relative to the sonar beam). Least-square mean percent error was significantly different from 0.0 for Atlantic sturgeon (x̄  =  −8.34, SE  =  2.39) and white perch (x̄  = 14.48, SE  =  3.99) but not striped bass (x̄  =  3.71, SE  =  2.58) or channel catfish (x̄  = 3.97, SE  =  5.16). Underestimating lengths of Atlantic sturgeon may be due to difficulty in detecting the snout or the longer dorsal lobe of the heterocercal tail. White perch was the smallest species tested, and it had the largest percent measurement errors (both positive and negative) and the lowest percentage of images classified as good or acceptable. Automated length estimates for the four species using Echoview software varied with position in the view-field. Estimates tended to be low at more extreme azimuthal angles (fish's angle off-axis within the view-field), but mean and maximum estimates were highly correlated with total length. Software estimates also were biased by fish images partially outside the view-field and when acoustic crosstalk occurred (when a fish perpendicular to the sonar and at relatively close range is detected in the side lobes of adjacent beams). These sources of

  5. Pre-Proposal Assessment of Reliability for Spacecraft Docking with Limited Information

    NASA Technical Reports Server (NTRS)

    Brall, Aron

    2013-01-01

    This paper addresses the problem of estimating the reliability of a critical system function as well as its impact on the system reliability when limited information is available. The approach addresses the basic function reliability, and then the impact of multiple attempts to accomplish the function. The dependence of subsequent attempts on prior failure to accomplish the function is also addressed. The autonomous docking of two spacecraft was the specific example that generated the inquiry, and the resultant impact on total reliability generated substantial interest in presenting the results due to the relative insensitivity of overall performance to basic function reliability and moderate degradation given sufficient attempts to try and accomplish the required goal. The application of the methodology allows proper emphasis on the characteristics that can be estimated with some knowledge, and to insulate the integrity of the design from those characteristics that can't be properly estimated with any rational value of uncertainty. The nature of NASA's missions contains a great deal of uncertainty due to the pursuit of new science or operations. This approach can be applied to any function where multiple attempts at success, with or without degradation, are allowed.

  6. Limits on reliable information flows through stochastic populations.

    PubMed

    Boczkowski, Lucas; Natale, Emanuele; Feinerman, Ofer; Korman, Amos

    2018-06-06

    Biological systems can share and collectively process information to yield emergent effects, despite inherent noise in communication. While man-made systems often employ intricate structural solutions to overcome noise, the structure of many biological systems is more amorphous. It is not well understood how communication noise may affect the computational repertoire of such groups. To approach this question we consider the basic collective task of rumor spreading, in which information from few knowledgeable sources must reliably flow into the rest of the population. We study the effect of communication noise on the ability of groups that lack stable structures to efficiently solve this task. We present an impossibility result which strongly restricts reliable rumor spreading in such groups. Namely, we prove that, in the presence of even moderate levels of noise that affect all facets of the communication, no scheme can significantly outperform the trivial one in which agents have to wait until directly interacting with the sources-a process which requires linear time in the population size. Our results imply that in order to achieve efficient rumor spread a system must exhibit either some degree of structural stability or, alternatively, some facet of the communication which is immune to noise. We then corroborate this claim by providing new analyses of experimental data regarding recruitment in Cataglyphis niger desert ants. Finally, in light of our theoretical results, we discuss strategies to overcome noise in other biological systems.

  7. Complex method to calculate objective assessments of information systems protection to improve expert assessments reliability

    NASA Astrophysics Data System (ADS)

    Abdenov, A. Zh; Trushin, V. A.; Abdenova, G. A.

    2018-01-01

    The paper considers the questions of filling the relevant SIEM nodes based on calculations of objective assessments in order to improve the reliability of subjective expert assessments. The proposed methodology is necessary for the most accurate security risk assessment of information systems. This technique is also intended for the purpose of establishing real-time operational information protection in the enterprise information systems. Risk calculations are based on objective estimates of the adverse events implementation probabilities, predictions of the damage magnitude from information security violations. Calculations of objective assessments are necessary to increase the reliability of the proposed expert assessments.

  8. Reliability and validity of pendulum test measures of spasticity obtained with the Polhemus tracking system from patients with chronic stroke

    PubMed Central

    Bohannon, Richard W; Harrison, Steven; Kinsella-Shaw, Jeffrey

    2009-01-01

    Background Spasticity is a common impairment accompanying stroke. Spasticity of the quadriceps femoris muscle can be quantified using the pendulum test. The measurement properties of pendular kinematics captured using a magnetic tracking system has not been studied among patients who have experienced a stroke. Therefore, this study describes the test-retest reliability and known groups and convergent validity of the pendulum test measures obtained with the Polhemus tracking system. Methods Eight patients with chronic stroke underwent pendulum tests with their affected and unaffected lower limbs, with and without the addition of a 2.2 kg cuff weight at the ankle, using the Polhemus magnetic tracking system. Also measured bilaterally were knee resting angles, Ashworth scores (grades 0–4) of quadriceps femoris muscles, patellar tendon (knee jerk) reflexes (grades 0–4), and isometric knee extension force. Results Three measures obtained from pendular traces of the affected side were reliable (intraclass correlation coefficient ≥ .844). Known groups validity was confirmed by demonstration of a significant difference in the measurements between sides. Convergent validity was supported by correlations ≥ .57 between pendulum test measures and other measures reflective of spasticity. Conclusion Pendulum test measures obtained with the Polhemus tracking system from the affected side of patients with stroke have good test-retest reliability and both known groups and convergent validity. PMID:19642989

  9. A Validity and Reliability Update on the Informal Reading Inventory with Suggestions for Improvement.

    ERIC Educational Resources Information Center

    Klesius, Janell P.; Homan, Susan P.

    1985-01-01

    The article reviews validity and reliability studies on the informal reading inventory, a diagnostic instrument to identify reading grade-level placement and strengths and weaknesses in work recognition and comprehension. Gives suggestions to improve the validity and reliability of existing inventories and to evaluate them in newly published…

  10. The Data Reliability of Volunteered Geographic Information with Using Traffic Accident Data

    NASA Astrophysics Data System (ADS)

    Sevinç, H. K.; Karaş, I. R.

    2017-11-01

    The development of mobile technologies is important in the lives of humans. Mobile devices constitute a great part of the daily lives of people. It has come to such a point that when people first wake up, they check their smart phones for the first thing. Users may share their positions with the GNSS sensors in mobile devices or they can add information about their positions in mobile applications. Users contribute to Geographical Information System with this sharing. These users consist of native (citizens) living in that geographical position not of the CBS specialists. Creating, collecting, sharing and disseminating the geographical data provided by voluntary individuals constitute the Volunteered Geographic Information System. The data in the Volunteered Geographic Information System are received from amateur users. "How reliable will the data received from amateur users instead of specialists of the field be in scientific terms?" In this study, the reliability between the data received from the voluntary users through Volunteered Geographic Information System and real data is investigated. The real data consist of the traffic accident coordinates. The data that will be received from users will be received through the speed values in the relevant coordinates and the marking of the users for possible accident points on the map.

  11. 78 FR 41339 - Electric Reliability Organization Proposal To Retire Requirements in Reliability Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-10

    ...] Electric Reliability Organization Proposal To Retire Requirements in Reliability Standards AGENCY: Federal... Reliability Standards identified by the North American Electric Reliability Corporation (NERC), the Commission-certified Electric Reliability Organization. FOR FURTHER INFORMATION CONTACT: Kevin Ryan (Legal Information...

  12. Reliability in the DSM-III field trials: interview v case summary.

    PubMed

    Hyler, S E; Williams, J B; Spitzer, R L

    1982-11-01

    A study compared the reliability of psychiatric diagnoses obtained from the live interviews and from case summaries, on the same patients, by the same clinicians, using the same DSM-III diagnostic criteria. The results showed that the reliability of the major diagnostic classes of DSM-III was higher when diagnoses were made from live interviews than when they were made from case summaries. We conclude that diagnoses based on information contained in traditionally prepared case summaries may lead to an underestimation of the reliability of diagnoses made based on information collected during a "live" interview.

  13. Use and perceptions of information among family physicians: sources considered accessible, relevant, and reliable.

    PubMed

    Kosteniuk, Julie G; Morgan, Debra G; D'Arcy, Carl K

    2013-01-01

    The research determined (1) the information sources that family physicians (FPs) most commonly use to update their general medical knowledge and to make specific clinical decisions, and (2) the information sources FPs found to be most physically accessible, intellectually accessible (easy to understand), reliable (trustworthy), and relevant to their needs. A cross-sectional postal survey of 792 FPs and locum tenens, in full-time or part-time medical practice, currently practicing or on leave of absence in the Canadian province of Saskatchewan was conducted during the period of January to April 2008. Of 666 eligible physicians, 331 completed and returned surveys, resulting in a response rate of 49.7% (331/666). Medical textbooks and colleagues in the main patient care setting were the top 2 sources for the purpose of making specific clinical decisions. Medical textbooks were most frequently considered by FPs to be reliable (trustworthy), and colleagues in the main patient care setting were most physically accessible (easy to access). When making specific clinical decisions, FPs were most likely to use information from sources that they considered to be reliable and generally physically accessible, suggesting that FPs can best be supported by facilitating easy and convenient access to high-quality information.

  14. Use and perceptions of information among family physicians: sources considered accessible, relevant, and reliable

    PubMed Central

    Kosteniuk, Julie G.; Morgan, Debra G.; D'Arcy, Carl K.

    2013-01-01

    Objectives: The research determined (1) the information sources that family physicians (FPs) most commonly use to update their general medical knowledge and to make specific clinical decisions, and (2) the information sources FPs found to be most physically accessible, intellectually accessible (easy to understand), reliable (trustworthy), and relevant to their needs. Methods: A cross-sectional postal survey of 792 FPs and locum tenens, in full-time or part-time medical practice, currently practicing or on leave of absence in the Canadian province of Saskatchewan was conducted during the period of January to April 2008. Results: Of 666 eligible physicians, 331 completed and returned surveys, resulting in a response rate of 49.7% (331/666). Medical textbooks and colleagues in the main patient care setting were the top 2 sources for the purpose of making specific clinical decisions. Medical textbooks were most frequently considered by FPs to be reliable (trustworthy), and colleagues in the main patient care setting were most physically accessible (easy to access). Conclusions: When making specific clinical decisions, FPs were most likely to use information from sources that they considered to be reliable and generally physically accessible, suggesting that FPs can best be supported by facilitating easy and convenient access to high-quality information. PMID:23405045

  15. Interventions to assist health consumers to find reliable online health information: a comprehensive review.

    PubMed

    Lee, Kenneth; Hoti, Kreshnik; Hughes, Jeffery D; Emmerton, Lynne M

    2014-01-01

    Health information on the Internet is ubiquitous, and its use by health consumers prevalent. Finding and understanding relevant online health information, and determining content reliability, pose real challenges for many health consumers. To identify the types of interventions that have been implemented to assist health consumers to find reliable online health information, and where possible, describe and compare the types of outcomes studied. PubMed, PsycINFO, CINAHL Plus and Cochrane Library databases; WorldCat and Scirus 'gray literature' search engines; and manual review of reference lists of selected publications. Publications were selected by firstly screening title, abstract, and then full text. Seven publications met the inclusion criteria, and were summarized in a data extraction form. The form incorporated the PICOS (Population Intervention Comparators Outcomes and Study Design) Model. Two eligible gray literature papers were also reported. Relevant data from included studies were tabulated to enable descriptive comparison. A brief critique of each study was included in the tables. This review was unable to follow systematic review methods due to the paucity of research and humanistic interventions reported. While extensive, the gray literature search may have had limited reach in some countries. The paucity of research on this topic limits conclusions that may be drawn. The few eligible studies predominantly adopted a didactic approach to assisting health consumers, whereby consumers were either taught how to find credible websites, or how to use the Internet. Common types of outcomes studied include knowledge and skills pertaining to Internet use and searching for reliable health information. These outcomes were predominantly self-assessed by participants. There is potential for further research to explore other avenues for assisting health consumers to find reliable online health information, and to assess outcomes via objective measures.

  16. Reliability and Validity of Information about Student Achievement: Comparing Large-Scale and Classroom Testing Contexts

    ERIC Educational Resources Information Center

    Cizek, Gregory J.

    2009-01-01

    Reliability and validity are two characteristics that must be considered whenever information about student achievement is collected. However, those characteristics--and the methods for evaluating them--differ in large-scale testing and classroom testing contexts. This article presents the distinctions between reliability and validity in the two…

  17. Securing recruitment and obtaining informed consent in minority ethnic groups in the UK.

    PubMed

    Lloyd, Cathy E; Johnson, Mark R D; Mughal, Shanaz; Sturt, Jackie A; Collins, Gary S; Roy, Tapash; Bibi, Rukhsana; Barnett, Anthony H

    2008-03-30

    Previous health research has often explicitly excluded individuals from minority ethnic backgrounds due to perceived cultural and communication difficulties, including studies where there might be language/literacy problems in obtaining informed consent. This study addressed these difficulties by developing audio-recorded methods of obtaining informed consent and recording data. This report outlines 1) our experiences with securing recruitment to a qualitative study investigating alternative methods of data collection, and 2) the development of a standardised process for obtaining informed consent from individuals from minority ethnic backgrounds whose main language does not have an agreed written form. Two researchers from South Asian backgrounds recruited adults with Type 2 diabetes whose main language was spoken and not written, to attend a series of focus groups. A screening tool was used at recruitment in order to assess literacy skills in potential participants. Informed consent was obtained using audio-recordings of the patient information and recording patients' verbal consent. Participants' perceptions of this method of obtaining consent were recorded. Recruitment rates were improved by using telephone compared to face-to-face methods. The screening tool was found to be acceptable by all potential participants. Audio-recorded methods of obtaining informed consent were easy to implement and accepted by all participants. Attrition rates differed according to ethnic group. Snowballing techniques only partly improved participation rates. Audio-recorded methods of obtaining informed consent are an acceptable alternative to written consent in study populations where literacy skills are variable. Further exploration of issues relating to attrition is required, and a range of methods may be necessary in order to maximise response and participation rates.

  18. 50 CFR 23.86 - How can I obtain information on a CoP?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 9 2014-10-01 2014-10-01 false How can I obtain information on a CoP? 23... FAUNA AND FLORA (CITES) CITES Administration § 23.86 How can I obtain information on a CoP? As we receive information on an upcoming CoP from the CITES Secretariat, we will notify the public either...

  19. 50 CFR 23.86 - How can I obtain information on a CoP?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false How can I obtain information on a CoP? 23... FAUNA AND FLORA (CITES) CITES Administration § 23.86 How can I obtain information on a CoP? As we receive information on an upcoming CoP from the CITES Secretariat, we will notify the public either...

  20. 50 CFR 23.86 - How can I obtain information on a CoP?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 9 2012-10-01 2012-10-01 false How can I obtain information on a CoP? 23... FAUNA AND FLORA (CITES) CITES Administration § 23.86 How can I obtain information on a CoP? As we receive information on an upcoming CoP from the CITES Secretariat, we will notify the public either...

  1. 50 CFR 23.86 - How can I obtain information on a CoP?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 9 2013-10-01 2013-10-01 false How can I obtain information on a CoP? 23... FAUNA AND FLORA (CITES) CITES Administration § 23.86 How can I obtain information on a CoP? As we receive information on an upcoming CoP from the CITES Secretariat, we will notify the public either...

  2. 50 CFR 23.86 - How can I obtain information on a CoP?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 8 2011-10-01 2011-10-01 false How can I obtain information on a CoP? 23... FAUNA AND FLORA (CITES) CITES Administration § 23.86 How can I obtain information on a CoP? As we receive information on an upcoming CoP from the CITES Secretariat, we will notify the public either...

  3. 12 CFR 232.3 - Financial information exception for obtaining and using medical information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... that the debt is current and that the consumer has no delinquencies in her repayment history. If the..., mental, or behavioral health, condition or history, type of treatment, or prognosis into account as part... example, to obtain and use information about: (i) The dollar amount, repayment terms, repayment history...

  4. Gene expression information improves reliability of receptor status in breast cancer patients

    PubMed Central

    Kenn, Michael; Schlangen, Karin; Castillo-Tong, Dan Cacsire; Singer, Christian F.; Cibena, Michael; Koelbl, Heinz; Schreiner, Wolfgang

    2017-01-01

    Immunohistochemical (IHC) determination of receptor status in breast cancer patients is frequently inaccurate. Since it directs the choice of systemic therapy, it is essential to increase its reliability. We increase the validity of IHC receptor expression by additionally considering gene expression (GE) measurements. Crisp therapeutic decisions are based on IHC estimates, even if they are borderline reliable. We further improve decision quality by a responsibility function, defining a critical domain for gene expression. Refined normalization is devised to file any newly diagnosed patient into existing data bases. Our approach renders receptor estimates more reliable by identifying patients with questionable receptor status. The approach is also more efficient since the rate of conclusive samples is increased. We have curated and evaluated gene expression data, together with clinical information, from 2880 breast cancer patients. Combining IHC with gene expression information yields a method more reliable and also more efficient as compared to common practice up to now. Several types of possibly suboptimal treatment allocations, based on IHC receptor status alone, are enumerated. A ‘therapy allocation check’ identifies patients possibly miss-classified. Estrogen: false negative 8%, false positive 6%. Progesterone: false negative 14%, false positive 11%. HER2: false negative 2%, false positive 50%. Possible implications are discussed. We propose an ‘expression look-up-plot’, allowing for a significant potential to improve the quality of precision medicine. Methods are developed and exemplified here for breast cancer patients, but they may readily be transferred to diagnostic data relevant for therapeutic decisions in other fields of oncology. PMID:29100391

  5. Reliability and information content of tests with cardioleader in cyclic types of sports

    NASA Technical Reports Server (NTRS)

    Utkin, V. L.

    1980-01-01

    Tests with cardioleader to control the physical, technical and tactical preparedness of athletes in cyclic types of sports are discussed. Ways of increasing the reliability and information content of the tests were studied.

  6. 40 CFR 2.311 - Special rules governing certain information obtained under the Motor Vehicle Information and Cost...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Special rules governing certain information obtained under the Motor Vehicle Information and Cost Savings Act. 2.311 Section 2.311 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL PUBLIC INFORMATION Confidentiality of Business Information § 2.311 Special rules governing...

  7. A Method to Increase Drivers' Trust in Collision Warning Systems Based on Reliability Information of Sensor

    NASA Astrophysics Data System (ADS)

    Tsutsumi, Shigeyoshi; Wada, Takahiro; Akita, Tokihiko; Doi, Shun'ichi

    Driver's workload tends to be increased during driving under complicated traffic environments like a lane change. In such cases, rear collision warning is effective for reduction of cognitive workload. On the other hand, it is pointed out that false alarm or missing alarm caused by sensor errors leads to decrease of driver' s trust in the warning system and it can result in low efficiency of the system. Suppose that reliability information of the sensor is provided in real-time. In this paper, we propose a new warning method to increase driver' s trust in the system even with low sensor reliability utilizing the sensor reliability information. The effectiveness of the warning methods is shown by driving simulator experiments.

  8. 40 CFR 166.34 - EPA review of information obtained in connection with emergency exemptions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false EPA review of information obtained in... PESTICIDES UNDER EMERGENCY CONDITIONS Specific, Quarantine, and Public Health Exemptions § 166.34 EPA review of information obtained in connection with emergency exemptions. EPA shall review information...

  9. Fog-computing concept usage as means to enhance information and control system reliability

    NASA Astrophysics Data System (ADS)

    Melnik, E. V.; Klimenko, A. B.; Ivanov, D. Ya

    2018-05-01

    This paper focuses on the reliability issue of information and control systems (ICS). The authors propose using the elements of the fog-computing concept to enhance the reliability function. The key idea of fog-computing is to shift computations to the fog-layer of the network, and thus to decrease the workload of the communication environment and data processing components. As for ICS, workload also can be distributed among sensors, actuators and network infrastructure facilities near the sources of data. The authors simulated typical workload distribution situations for the “traditional” ICS architecture and for the one with fogcomputing concept elements usage. The paper contains some models, selected simulation results and conclusion about the prospects of the fog-computing as a means to enhance ICS reliability.

  10. Pennsylvania StreamStats--A web-based application for obtaining water-resource-related information

    USGS Publications Warehouse

    Stuckey, Marla H.; Hoffman, Scott A.

    2010-01-01

    StreamStats is a national web-based Geographic Information System (GIS) application, developed by the U.S. Geological Survey (USGS), in cooperation with Environmental Systems Research Institute, Inc., to provide a variety of water-resource-related information. Users can easily obtain descriptive information, basin characteristics, and streamflow statistics for USGS streamgages and ungaged stream locations throughout Pennsylvania. StreamStats also allows users to search upstream and (or) downstream from user-selected points to identify locations of and obtain information for water-resource-related activities, such as dams and streamgages.

  11. 32 CFR Appendix G to Part 275 - Releasing Information Obtained From Financial Institutions

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 2 2013-07-01 2013-07-01 false Releasing Information Obtained From Financial Institutions G Appendix G to Part 275 National Defense Department of Defense (Continued) OFFICE OF THE... FINANCIAL PRIVACY ACT OF 1978 Pt. 275, App. G Appendix G to Part 275—Releasing Information Obtained From...

  12. 32 CFR Appendix G to Part 275 - Releasing Information Obtained From Financial Institutions

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 2 2011-07-01 2011-07-01 false Releasing Information Obtained From Financial Institutions G Appendix G to Part 275 National Defense Department of Defense (Continued) OFFICE OF THE... FINANCIAL PRIVACY ACT OF 1978 Pt. 275, App. G Appendix G to Part 275—Releasing Information Obtained From...

  13. 32 CFR Appendix G to Part 275 - Releasing Information Obtained From Financial Institutions

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 2 2012-07-01 2012-07-01 false Releasing Information Obtained From Financial Institutions G Appendix G to Part 275 National Defense Department of Defense (Continued) OFFICE OF THE... FINANCIAL PRIVACY ACT OF 1978 Pt. 275, App. G Appendix G to Part 275—Releasing Information Obtained From...

  14. 32 CFR Appendix G to Part 275 - Releasing Information Obtained From Financial Institutions

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 2 2014-07-01 2014-07-01 false Releasing Information Obtained From Financial Institutions G Appendix G to Part 275 National Defense Department of Defense (Continued) OFFICE OF THE... FINANCIAL PRIVACY ACT OF 1978 Pt. 275, App. G Appendix G to Part 275—Releasing Information Obtained From...

  15. Timeline historical review of income and financial transactions: a reliable assessment of personal finances.

    PubMed

    Black, Anne C; Serowik, Kristin L; Ablondi, Karen M; Rosen, Marc I

    2013-01-01

    The need for accurate and reliable information about income and resources available to individuals with psychiatric disabilities is critical for the assessment of need and evaluation of programs designed to alleviate financial hardship or affect finance allocation. Measurement of finances is ubiquitous in studies of economics, poverty, and social services. However, evidence has demonstrated that these measures often contain error. We compare the 1-week test-retest reliability of income and finance data from 24 adult psychiatric outpatients using assessment-as-usual (AAU) and a new instrument, the Timeline Historical Review of Income and Financial Transactions (THRIFT). Reliability estimates obtained with the THRIFT for Income (0.77), Expenses (0.91), and Debt (0.99) domains were significantly better than those obtained with AAU. Reliability estimates for Balance did not differ. THRIFT reduced measurement error and provided more reliable information than AAU for assessment of personal finances in psychiatric patients receiving Social Security benefits. The instrument also may be useful with other low-income groups.

  16. Construct Reliability and Validity of the Shortened Version of the Information-Seeking Behavior Scale

    ERIC Educational Resources Information Center

    Lerdpornkulrat, Thanita; Poondej, Chanut; Koul, Ravinder

    2017-01-01

    This study aimed to translate the information-seeking behavior scale from English to Thai, and to ascertain the construct reliability and validity of the scale. Data were collected from 664 undergraduate students in Thailand. The descriptive statistics were explored to see the extent to which various information sources are being used by…

  17. Investigation of reliability indicators of information analysis systems based on Markov’s absorbing chain model

    NASA Astrophysics Data System (ADS)

    Gilmanshin, I. R.; Kirpichnikov, A. P.

    2017-09-01

    In the result of study of the algorithm of the functioning of the early detection module of excessive losses, it is proven the ability to model it by using absorbing Markov chains. The particular interest is in the study of probability characteristics of early detection module functioning algorithm of losses in order to identify the relationship of indicators of reliability of individual elements, or the probability of occurrence of certain events and the likelihood of transmission of reliable information. The identified relations during the analysis allow to set thresholds reliability characteristics of the system components.

  18. Differences in Reliability of Reproductive History Recall among Women in North Africa

    ERIC Educational Resources Information Center

    Soliman, Amr; Allen, Katharine; Lo, An-Chi; Banerjee, Mousumi; Hablas, Ahmed; Benider, Abdellatif; Benchekroun, Nadya; Samir, Salwa; Omar, Hoda G.; Merajver, Sofia; Mullan, Patricia

    2009-01-01

    Breast cancer is the most common cancer among women in North Africa. Women in this region have unique reproductive profiles. It is essential to obtain reliable information on reproductive histories to help better understand the relationship between reductive health and breast cancer. We tested the reliability of a reproductive history-based…

  19. 32 CFR Appendix A to Part 275 - Obtaining Basic Identifying Account Information

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Obtaining Basic Identifying Account Information... Information A. A DoD law enforcement office may issue a formal written request for basic identifying account... only the above specified basic identifying information concerning a customer's account. C. A format for...

  20. 48 CFR 1809.505-4 - Obtaining access to sensitive information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Organizational and Consultant Conflicts of Interest 1809.505-4 Obtaining access to sensitive information. (b) In... support management activities and administrative functions. The Assistant Administrator for Procurement... require contractors and subcontractors and their employees in procurements that support management...

  1. Reproducibility and interoperator reliability of obtaining images and measurements of the cervix and uterus with brachytherapy treatment applicators in situ using transabdominal ultrasound.

    PubMed

    van Dyk, Sylvia; Garth, Margaret; Oates, Amanda; Kondalsamy-Chennakesavan, Srinivas; Schneider, Michal; Bernshaw, David; Narayan, Kailash

    2016-01-01

    To validate interoperator reliability of brachytherapy radiation therapists (RTs) in obtaining an ultrasound image and measuring the cervix and uterine dimensions using transabdominal ultrasound. Patients who underwent MRI with applicators in situ after the first insertion were included in the study. Imaging was performed by three RTs (RT1, RT2, and RT3) with varying degrees of ultrasound experience. All RTs were required to obtain a longitudinal planning image depicting the applicator in the uterine canal and measure the cervix and uterus. The MRI scan, taken 1 hour after the ultrasound, was used as the reference standard against which all measurements were compared. Measurements were analyzed with intraclass correlation coefficient and Bland-Altman plots. All RTs were able to obtain a suitable longitudinal image for each patient in the study. Mean differences (SD) between MRI and ultrasound measurements obtained by RTs ranged from 3.5 (3.6) to 4.4 (4.23) mm and 0 (3.0) to 0.9 (2.5) mm on the anterior and posterior surface of the cervix, respectively. Intraclass correlation coefficient for absolute agreement between MRI and RTs was >0.9 for all posterior measurement points in the cervix and ranged from 0.41 to 0.92 on the anterior surface. Measurements were not statistically different between RTs at any measurement point. RTs with variable training attained high levels of interoperator reliability when using transabdominal ultrasound to obtain images and measurements of the uterus and cervix with brachytherapy applicators in situ. Access to training and use of a well-defined protocol assist in achieving these high levels of reliability. Copyright © 2016 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

  2. Using Internet Search Engines to Obtain Medical Information: A Comparative Study

    PubMed Central

    Wang, Liupu; Wang, Juexin; Wang, Michael; Li, Yong; Liang, Yanchun

    2012-01-01

    Background The Internet has become one of the most important means to obtain health and medical information. It is often the first step in checking for basic information about a disease and its treatment. The search results are often useful to general users. Various search engines such as Google, Yahoo!, Bing, and Ask.com can play an important role in obtaining medical information for both medical professionals and lay people. However, the usability and effectiveness of various search engines for medical information have not been comprehensively compared and evaluated. Objective To compare major Internet search engines in their usability of obtaining medical and health information. Methods We applied usability testing as a software engineering technique and a standard industry practice to compare the four major search engines (Google, Yahoo!, Bing, and Ask.com) in obtaining health and medical information. For this purpose, we searched the keyword breast cancer in Google, Yahoo!, Bing, and Ask.com and saved the results of the top 200 links from each search engine. We combined nonredundant links from the four search engines and gave them to volunteer users in an alphabetical order. The volunteer users evaluated the websites and scored each website from 0 to 10 (lowest to highest) based on the usefulness of the content relevant to breast cancer. A medical expert identified six well-known websites related to breast cancer in advance as standards. We also used five keywords associated with breast cancer defined in the latest release of Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT) and analyzed their occurrence in the websites. Results Each search engine provided rich information related to breast cancer in the search results. All six standard websites were among the top 30 in search results of all four search engines. Google had the best search validity (in terms of whether a website could be opened), followed by Bing, Ask.com, and Yahoo!. The search

  3. Using Internet search engines to obtain medical information: a comparative study.

    PubMed

    Wang, Liupu; Wang, Juexin; Wang, Michael; Li, Yong; Liang, Yanchun; Xu, Dong

    2012-05-16

    The Internet has become one of the most important means to obtain health and medical information. It is often the first step in checking for basic information about a disease and its treatment. The search results are often useful to general users. Various search engines such as Google, Yahoo!, Bing, and Ask.com can play an important role in obtaining medical information for both medical professionals and lay people. However, the usability and effectiveness of various search engines for medical information have not been comprehensively compared and evaluated. To compare major Internet search engines in their usability of obtaining medical and health information. We applied usability testing as a software engineering technique and a standard industry practice to compare the four major search engines (Google, Yahoo!, Bing, and Ask.com) in obtaining health and medical information. For this purpose, we searched the keyword breast cancer in Google, Yahoo!, Bing, and Ask.com and saved the results of the top 200 links from each search engine. We combined nonredundant links from the four search engines and gave them to volunteer users in an alphabetical order. The volunteer users evaluated the websites and scored each website from 0 to 10 (lowest to highest) based on the usefulness of the content relevant to breast cancer. A medical expert identified six well-known websites related to breast cancer in advance as standards. We also used five keywords associated with breast cancer defined in the latest release of Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT) and analyzed their occurrence in the websites. Each search engine provided rich information related to breast cancer in the search results. All six standard websites were among the top 30 in search results of all four search engines. Google had the best search validity (in terms of whether a website could be opened), followed by Bing, Ask.com, and Yahoo!. The search results highly overlapped between the

  4. Perthes Disease: The Quality and Reliability of Information on the Internet.

    PubMed

    Nassiri, Mujtaba; Bruce-Brand, Robert A; O'Neill, Francis; Chenouri, Shojaeddin; Curtin, Paul

    2015-01-01

    Research has shown that up to 89% of parents used the Internet to seek health information regarding their child's medical condition. Much of the information on the Internet is valuable; however, the quality of health information is variable and unregulated. The aim of this study was to evaluate the quality and content of information about Perthes disease on the Internet using recognized scoring systems, identification of quality markers, and describe a novel specific score. We searched the top 3 search engines (Google, Yahoo!, and Bing) for the following keywords: "Perthes disease." Forty-five unique Web sites were identified. The Web sites were then categorized by type and assessed using the DISCERN score, the Journal of the American Medical Association (JAMA) benchmark criteria, and a novel Perthes-specific Content score. The presence of the Health On the Net (HON) code, a reported quality assurance marker, was noted. Of the Web sites analyzed, the Majority were Governmental and Nonprofit Organizations (NPO) (37.8%), followed by commercial Web sites (22.2%). Only 6 of the Web sites were HONcode certified. The mean DISCERN score was 53.1 (SD=9.0). The Governmental and NPO Web sites had the highest overall DISCERN scores followed closely by Physician Web sites. The mean JAMA benchmark criteria score was 2.1 (SD=1.2). Nine Web sites had maximal scores and the Academic Web sites had the highest overall JAMA benchmark scores. DISCERN scores, JAMA benchmark scores, and Perthes-specific Content scores were all greater for Web sites that bore the HONcode seal. The quality of information available online regarding Perthes disease is of variable quality. Governmental and NPO Web sites predominate and also provide higher quality content. The HONcode seal is a reliable indicator of Web site quality. Physicians should recommend the HONcode seal to their patients as a reliable indicator of Web site quality or, better yet, refer patients to sites they have personally reviewed

  5. 40 CFR 2.310 - Special rules governing certain information obtained under the Comprehensive Environmental...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... information obtained under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980... information obtained under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980, as amended. (a) Definitions. For purposes of this section: (1) Act means the Comprehensive...

  6. A reliability evaluation methodology for memory chips for space applications when sample size is small

    NASA Technical Reports Server (NTRS)

    Chen, Y.; Nguyen, D.; Guertin, S.; Berstein, J.; White, M.; Menke, R.; Kayali, S.

    2003-01-01

    This paper presents a reliability evaluation methodology to obtain the statistical reliability information of memory chips for space applications when the test sample size needs to be kept small because of the high cost of the radiation hardness memories.

  7. 40 CFR 712.7 - Report of readily obtainable information for subparts B and C.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Report of readily obtainable... Report of readily obtainable information for subparts B and C. TSCA section 8(a) authorizes EPA to require persons to report information that is known to or reasonably ascertainable by them. For purposes...

  8. Reading Information about a Scientific Phenomenon on Webpages Varying for Reliability: An Eye-Movement Analysis

    ERIC Educational Resources Information Center

    Mason, Lucia; Pluchino, Patrik; Ariasi, Nicola

    2014-01-01

    Students search the Web frequently for many purposes, one of which is to search information for academic assignments. Given the huge amount of easily accessible online information, they are required to develop new reading skills and become more able to effectively evaluate the reliability of web sources. This study investigates the distribution of…

  9. Application of Vibration and Oil Analysis for Reliability Information on Helicopter Main Rotor Gearbox

    NASA Astrophysics Data System (ADS)

    Murrad, Muhamad; Leong, M. Salman

    Based on the experiences of the Malaysian Armed Forces (MAF), failure of the main rotor gearbox (MRGB) was one of the major contributing factors to helicopter breakdowns. Even though vibration and oil analysis are the effective techniques for monitoring the health of helicopter components, these two techniques were rarely combined to form an effective assessment tool in MAF. Results of the oil analysis were often used only for oil changing schedule while assessments of MRGB condition were mainly based on overall vibration readings. A study group was formed and given a mandate to improve the maintenance strategy of S61-A4 helicopter fleet in the MAF. The improvement consisted of a structured approach to the reassessment/redefinition suitable maintenance actions that should be taken for the MRGB. Basic and enhanced tools for condition monitoring (CM) are investigated to address the predominant failures of the MRGB. Quantitative accelerated life testing (QALT) was considered in this work with an intent to obtain the required reliability information in a shorter time with tests under normal stress conditions. These tests when performed correctly can provide valuable information about MRGB performance under normal operating conditions which enable maintenance personnel to make decision more quickly, accurately and economically. The time-to-failure and probability of failure information of the MRGB were generated by applying QALT analysis principles. This study is anticipated to make a dramatic change in its approach to CM, bringing significant savings and various benefits to MAF.

  10. 28 CFR 51.37 - Obtaining information from the submitting authority.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Obtaining information from the submitting authority. 51.37 Section 51.37 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) PROCEDURES FOR THE ADMINISTRATION OF SECTION 5 OF THE VOTING RIGHTS ACT OF 1965, AS AMENDED Processing of Submissions § 51.37...

  11. [Toxoplasmosis and Pregnancy: Reliability of Internet Sources of Information].

    PubMed

    Bobić, Branko; Štajner, Tijana; Nikolić, Aleksandra; Klun, Ivana; Srbljanović, Jelena; Djurković-Djaković, Olgica

    2015-01-01

    Health education of women of childbearing age has been shown to be an acceptable approach to the prevention of toxoplasmosis, the most frequent congenitally transmitted parasitic infection. The aim of this study was to evaluate the Internet as a source of health education on toxoplasmosis in pregnancy. A group of 100 pregnant women examined in the National Reference Laboratory for Toxoplasmosis was surveyed by a questionnaire on the source of their information on toxoplasmosis. We also analyzed information offered by websites in the Serbian and Croatian languages through the Google search engine, using "toxoplasmosis" as a keyword. The 23 top websites were evaluated for comprehensiveness and accuracy of information on the impact of toxoplasmosis on the course of pregnancy, diagnosis and prevention. Having knowledge on toxoplasmosis was confirmed by 64 (64.0%) examined women, 40.6% (26/64) of whom learned about toxoplasmosis through the Internet, 48.4% from physicians, and 10.9% from friends. Increase in the degree of education was found to be associated with the probability that pregnant women would be informed via the Internet (RR=3.15, 95% CI=1.27-7.82, p=0.013). Analysis of four interactive websites (allowing users to ask questions) showed that routes of infection were the most common concern, particularly the risk presented by pet cats and dogs, followed by the diagnosis of infection (who and when should be tested, and how should the results be interpreted). Of 20 sites containing educational articles, only seven were authorized and two listed sources. Evaluation confirmed that information relevant to pregnant women was significantly more accurate than comprehensive, but no site gave both comprehensive and completely accurate information. Only four sites (20%) were good sources of information for pregnant women. Internet has proved itself as an important source of information. However, despite numerous websites, only a few offer reliable information to the

  12. Effectiveness of different approaches to disseminating traveler information on travel time reliability. [supporting datasets

    DOT National Transportation Integrated Search

    2013-11-30

    Travel time reliability information includes static data about traffic speeds or trip times that capture historic variations from day to day, and it can help individuals understand the level of variation in traffic. Unlike real-time travel time infor...

  13. Validity and reliability of the Diagnostic Adaptive Behaviour Scale.

    PubMed

    Tassé, M J; Schalock, R L; Balboni, G; Spreat, S; Navas, P

    2016-01-01

    The Diagnostic Adaptive Behaviour Scale (DABS) is a new standardised adaptive behaviour measure that provides information for evaluating limitations in adaptive behaviour for the purpose of determining a diagnosis of intellectual disability. This article presents validity evidence and reliability data for the DABS. Validity evidence was based on comparing DABS scores with scores obtained on the Vineland Adaptive Behaviour Scale, second edition. The stability of the test scores was measured using a test and retest, and inter-rater reliability was assessed by computing the inter-respondent concordance. The DABS convergent validity coefficients ranged from 0.70 to 0.84, while the test-retest reliability coefficients ranged from 0.78 to 0.95, and the inter-rater concordance as measured by intraclass correlation coefficients ranged from 0.61 to 0.87. All obtained validity and reliability indicators were strong and comparable with the validity and reliability coefficients of the most commonly used adaptive behaviour instruments. These results and the advantages of the DABS for clinician and researcher use are discussed. © 2015 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

  14. Influence of pansharpening techniques in obtaining accurate vegetation thematic maps

    NASA Astrophysics Data System (ADS)

    Ibarrola-Ulzurrun, Edurne; Gonzalo-Martin, Consuelo; Marcello-Ruiz, Javier

    2016-10-01

    In last decades, there have been a decline in natural resources, becoming important to develop reliable methodologies for their management. The appearance of very high resolution sensors has offered a practical and cost-effective means for a good environmental management. In this context, improvements are needed for obtaining higher quality of the information available in order to get reliable classified images. Thus, pansharpening enhances the spatial resolution of the multispectral band by incorporating information from the panchromatic image. The main goal in the study is to implement pixel and object-based classification techniques applied to the fused imagery using different pansharpening algorithms and the evaluation of thematic maps generated that serve to obtain accurate information for the conservation of natural resources. A vulnerable heterogenic ecosystem from Canary Islands (Spain) was chosen, Teide National Park, and Worldview-2 high resolution imagery was employed. The classes considered of interest were set by the National Park conservation managers. 7 pansharpening techniques (GS, FIHS, HCS, MTF based, Wavelet `à trous' and Weighted Wavelet `à trous' through Fractal Dimension Maps) were chosen in order to improve the data quality with the goal to analyze the vegetation classes. Next, different classification algorithms were applied at pixel-based and object-based approach, moreover, an accuracy assessment of the different thematic maps obtained were performed. The highest classification accuracy was obtained applying Support Vector Machine classifier at object-based approach in the Weighted Wavelet `à trous' through Fractal Dimension Maps fused image. Finally, highlight the difficulty of the classification in Teide ecosystem due to the heterogeneity and the small size of the species. Thus, it is important to obtain accurate thematic maps for further studies in the management and conservation of natural resources.

  15. Legal and psychological considerations for obtaining informed consent for reverse total shoulder arthroplasty.

    PubMed

    Blackwood, Craig; Dixon, Jen; Reilly, Peter; Emery, Roger J

    2017-01-01

    This paper seeks to outline recent legal developments and requirements pertinent to obtaining informed consent. We argue that this is of particular relevance to patients considering a reverse total shoulder arthroplasty, due to the high complication rate associated with this procedure. By examining the cognitive processes involved in decision-making, and other clinician-related factors such as delivery of information, gender bias and conflict of interest, we explore some of the barriers that can undermine the processes of shared decision-making and obtaining genuine informed consent. We argue that these issues highlight the importance for surgeons in understanding the cognitive processes and other influential factors involved in patients' comprehension and decision-making. We recommend, based on strong evidence, that decision aids could prove useful in overcoming such challenges and could provide one way of mitigating the ethical, professional and legal consequences of failing to obtain proper informed consent. They are not widely used in orthopaedics at present, although it would be in the interests of both the surgeon and patient for such measures to be explored.

  16. Legal and psychological considerations for obtaining informed consent for reverse total shoulder arthroplasty

    PubMed Central

    Blackwood, Craig; Reilly, Peter; Emery, Roger J

    2016-01-01

    This paper seeks to outline recent legal developments and requirements pertinent to obtaining informed consent. We argue that this is of particular relevance to patients considering a reverse total shoulder arthroplasty, due to the high complication rate associated with this procedure. By examining the cognitive processes involved in decision-making, and other clinician-related factors such as delivery of information, gender bias and conflict of interest, we explore some of the barriers that can undermine the processes of shared decision-making and obtaining genuine informed consent. We argue that these issues highlight the importance for surgeons in understanding the cognitive processes and other influential factors involved in patients’ comprehension and decision-making. We recommend, based on strong evidence, that decision aids could prove useful in overcoming such challenges and could provide one way of mitigating the ethical, professional and legal consequences of failing to obtain proper informed consent. They are not widely used in orthopaedics at present, although it would be in the interests of both the surgeon and patient for such measures to be explored. PMID:28572846

  17. 25 CFR 162.520 - Who owns the energy resource information obtained under the WEEL?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... AND WATER LEASES AND PERMITS Wind and Solar Resource Leases Weels § 162.520 Who owns the energy resource information obtained under the WEEL? (a) The WEEL must specify the ownership of any energy... 25 Indians 1 2014-04-01 2014-04-01 false Who owns the energy resource information obtained under...

  18. 25 CFR 162.520 - Who owns the energy resource information obtained under the WEEL?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... AND WATER LEASES AND PERMITS Wind and Solar Resource Leases Weels § 162.520 Who owns the energy resource information obtained under the WEEL? (a) The WEEL must specify the ownership of any energy... 25 Indians 1 2013-04-01 2013-04-01 false Who owns the energy resource information obtained under...

  19. The Outcome and Assessment Information Set (OASIS): A Review of Validity and Reliability

    PubMed Central

    O’CONNOR, MELISSA; DAVITT, JOAN K.

    2015-01-01

    The Outcome and Assessment Information Set (OASIS) is the patient-specific, standardized assessment used in Medicare home health care to plan care, determine reimbursement, and measure quality. Since its inception in 1999, there has been debate over the reliability and validity of the OASIS as a research tool and outcome measure. A systematic literature review of English-language articles identified 12 studies published in the last 10 years examining the validity and reliability of the OASIS. Empirical findings indicate the validity and reliability of the OASIS range from low to moderate but vary depending on the item studied. Limitations in the existing research include: nonrepresentative samples; inconsistencies in methods used, items tested, measurement, and statistical procedures; and the changes to the OASIS itself over time. The inconsistencies suggest that these results are tentative at best; additional research is needed to confirm the value of the OASIS for measuring patient outcomes, research, and quality improvement. PMID:23216513

  20. [The meaning of autonomy in Chinese culture: obtaining informed consent for operation].

    PubMed

    Lin, Mei-Ling; Wu, Jo Yung-Wei; Huang, Mei-Chih

    2008-10-01

    The purpose of gaining the patient's informed consent is ethical, lying in respect for his or her autonomy, and such consent forms the foundation for the performance of clinical medical treatment. In order to respect the patient's autonomy, for example, during decisions about operations, doctors have the obligation to clearly explain that patient's medical condition to him/her. A thorough briefing should be given prior to the obtaining of the patients' consent. In fulfillment of their duties as medical professionals, both doctors and nurses should be involved in clinically informing patients as well as in obtaining their signature for operation and anesthesia. Although informing patients about their physical state is not the responsibility of nurses, it remains absolutely necessary for nurses to understand how people in Asian cultures understand autonomy. This paper begins with a discussion of autonomy in ethics, and then outlines the differences between the Eastern and Western concepts of autonomy, before discussing the obtaining of the signature of consent, a process performed by the nursing staff during clinical treatment, and resulting in the provision of such signatures by patients with the legal capacity to provide them.

  1. GP preferences for information systems: conjoint analysis of speed, reliability, access and users.

    PubMed

    Wyatt, Jeremy C; Batley, Richard P; Keen, Justin

    2010-10-01

    To elicit the preferences and trade-offs of UK general practitioners about key features of health information systems, to help inform the design of such systems in future. A stated choice study to uncover implicit preferences based on a binary choice between scenarios presented in random order. were all 303 general practice members of the UK Internet service provider, Medix who were approached by email to participate. The main outcome measure was the number of seconds delay in system response that general practitioners were willing to trade off for each key system feature: the reliability of the system, the sites from which the system could be accessed and which staff are able to view patient data. Doctors valued speed of response most in information systems but would be prepared to wait 28 seconds to access a system in exchange for improved reliability from 95% to 99%, a further 2 seconds for an improvement to 99.9% and 27 seconds for access to data from anywhere including their own home compared with one place in a single health care premises. However, they would require a system that was 14 seconds faster to compensate for allowing social care as well as National Health Service staff to read patient data. These results provide important new evidence about which system characteristics doctors value highly, and hence which characteristics designers need to focus on when large scale health information systems are planned. © 2010 Blackwell Publishing Ltd.

  2. Being an Informed Consumer of Health Information and Assessment of Electronic Health Literacy in a National Sample of Internet Users: Validity and Reliability of the e-HLS Instrument.

    PubMed

    Seçkin, Gül; Yeatts, Dale; Hughes, Susan; Hudson, Cassie; Bell, Valarie

    2016-07-11

    The Internet, with its capacity to provide information that transcends time and space barriers, continues to transform how people find and apply information to their own lives. With the current explosion in electronic sources of health information, including thousands of websites and hundreds of mobile phone health apps, electronic health literacy is gaining an increasing prominence in health and medical research. An important dimension of electronic health literacy is the ability to appraise the quality of information that will facilitate everyday health care decisions. Health information seekers explore their care options by gathering information from health websites, blogs, Web-based forums, social networking websites, and advertisements, despite the fact that information quality on the Internet varies greatly. Nonetheless, research has lagged behind in establishing multidimensional instruments, in part due to the evolving construct of health literacy itself. The purpose of this study was to examine psychometric properties of a new electronic health literacy (ehealth literacy) measure in a national sample of Internet users with specific attention to older users. Our paper is motivated by the fact that ehealth literacy is an underinvestigated area of inquiry. Our sample was drawn from a panel of more than 55,000 participants maintained by Knowledge Networks, the largest national probability-based research panel for Web-based surveys. We examined the factor structure of a 19-item electronic Health Literacy Scale (e-HLS) through exploratory factor analysis (EFA) and confirmatory factor analysis, internal consistency reliability, and construct validity on sample of adults (n=710) and a subsample of older adults (n=194). The AMOS graphics program 21.0 was used to construct a measurement model, linking latent factors obtained from EFA with 19 indicators to determine whether this factor structure achieved a good fit with our entire sample and the subsample (age ≥ 60

  3. Being an Informed Consumer of Health Information and Assessment of Electronic Health Literacy in a National Sample of Internet Users: Validity and Reliability of the e-HLS Instrument

    PubMed Central

    Yeatts, Dale; Hughes, Susan; Hudson, Cassie; Bell, Valarie

    2016-01-01

    Background The Internet, with its capacity to provide information that transcends time and space barriers, continues to transform how people find and apply information to their own lives. With the current explosion in electronic sources of health information, including thousands of websites and hundreds of mobile phone health apps, electronic health literacy is gaining an increasing prominence in health and medical research. An important dimension of electronic health literacy is the ability to appraise the quality of information that will facilitate everyday health care decisions. Health information seekers explore their care options by gathering information from health websites, blogs, Web-based forums, social networking websites, and advertisements, despite the fact that information quality on the Internet varies greatly. Nonetheless, research has lagged behind in establishing multidimensional instruments, in part due to the evolving construct of health literacy itself. Objective The purpose of this study was to examine psychometric properties of a new electronic health literacy (ehealth literacy) measure in a national sample of Internet users with specific attention to older users. Our paper is motivated by the fact that ehealth literacy is an underinvestigated area of inquiry. Methods Our sample was drawn from a panel of more than 55,000 participants maintained by Knowledge Networks, the largest national probability-based research panel for Web-based surveys. We examined the factor structure of a 19-item electronic Health Literacy Scale (e-HLS) through exploratory factor analysis (EFA) and confirmatory factor analysis, internal consistency reliability, and construct validity on sample of adults (n=710) and a subsample of older adults (n=194). The AMOS graphics program 21.0 was used to construct a measurement model, linking latent factors obtained from EFA with 19 indicators to determine whether this factor structure achieved a good fit with our entire sample

  4. Paid Work and Unpaid Work: Diary Information Versus Questionnaire Information

    ERIC Educational Resources Information Center

    Bonke, Jens

    2005-01-01

    Time-use information is preferably obtained from diaries, as this method is considered more reliable than information from questionnaires. Data from the Danish Time Use Survey 2001 thus indicate differences in the level of unpaid work, whereas only minor differences appear for paid work. That is: people reporting many hours of paid work tend to…

  5. On the reliability of the occlusion technique as a tool for the assessment of the HMI of in-vehicle information and communication systems.

    PubMed

    Gelau, Christhard; Henning, Matthias J; Krems, Josef F

    2009-03-01

    In recent years considerable efforts have been spent on the development of the occlusion technique as a procedure for the assessment of the human-machine interface of in-vehicle information and communication systems (IVIS) designed to be used by the driver while driving. The importance and significance of the findings resulting from the application of this procedure depends essentially on its reliability. Because there is a lack of evidence as to whether this basic criterion of measurement is met with this procedure, and because questionable reliability can lead to doubts about their validity, our project strove to clarify this issue. This paper reports on a statistical reanalysis of data obtained from previous experiments. To summarise, the characteristic values found for internal consistency were almost all in the range of .90 for the occlusion technique, which can be considered satisfactory.

  6. Is One Trial Sufficient to Obtain Excellent Pressure Pain Threshold Reliability in the Low Back of Asymptomatic Individuals? A Test-Retest Study.

    PubMed

    Balaguier, Romain; Madeleine, Pascal; Vuillerme, Nicolas

    2016-01-01

    - and inter-session. Reliable measurements can be equally achieved when using the mean of two or three consecutive PPT measurements, as usually proposed in the literature, or with only the first one. Although reliability was almost perfect regardless of the conducted comparison between PPT assessments, our results suggest using two consecutive measurements to obtain higher short term absolute reliability.

  7. Scene Configuration and Object Reliability Affect the Use of Allocentric Information for Memory-Guided Reaching

    PubMed Central

    Klinghammer, Mathias; Blohm, Gunnar; Fiehler, Katja

    2017-01-01

    Previous research has shown that egocentric and allocentric information is used for coding target locations for memory-guided reaching movements. Especially, task-relevance determines the use of objects as allocentric cues. Here, we investigated the influence of scene configuration and object reliability as a function of task-relevance on allocentric coding for memory-guided reaching. For that purpose, we presented participants images of a naturalistic breakfast scene with five objects on a table and six objects in the background. Six of these objects served as potential reach-targets (= task-relevant objects). Participants explored the scene and after a short delay, a test scene appeared with one of the task-relevant objects missing, indicating the location of the reach target. After the test scene vanished, participants performed a memory-guided reaching movement toward the target location. Besides removing one object from the test scene, we also shifted the remaining task-relevant and/or task-irrelevant objects left- or rightwards either coherently in the same direction or incoherently in opposite directions. By varying object coherence, we manipulated the reliability of task-relevant and task-irrelevant objects in the scene. In order to examine the influence of scene configuration (distributed vs. grouped arrangement of task-relevant objects) on allocentric coding, we compared the present data with our previously published data set (Klinghammer et al., 2015). We found that reaching errors systematically deviated in the direction of object shifts, but only when the objects were task-relevant and their reliability was high. However, this effect was substantially reduced when task-relevant objects were distributed across the scene leading to a larger target-cue distance compared to a grouped configuration. No deviations of reach endpoints were observed in conditions with shifts of only task-irrelevant objects or with low object reliability irrespective of task

  8. Scene Configuration and Object Reliability Affect the Use of Allocentric Information for Memory-Guided Reaching.

    PubMed

    Klinghammer, Mathias; Blohm, Gunnar; Fiehler, Katja

    2017-01-01

    Previous research has shown that egocentric and allocentric information is used for coding target locations for memory-guided reaching movements. Especially, task-relevance determines the use of objects as allocentric cues. Here, we investigated the influence of scene configuration and object reliability as a function of task-relevance on allocentric coding for memory-guided reaching. For that purpose, we presented participants images of a naturalistic breakfast scene with five objects on a table and six objects in the background. Six of these objects served as potential reach-targets (= task-relevant objects). Participants explored the scene and after a short delay, a test scene appeared with one of the task-relevant objects missing, indicating the location of the reach target. After the test scene vanished, participants performed a memory-guided reaching movement toward the target location. Besides removing one object from the test scene, we also shifted the remaining task-relevant and/or task-irrelevant objects left- or rightwards either coherently in the same direction or incoherently in opposite directions. By varying object coherence, we manipulated the reliability of task-relevant and task-irrelevant objects in the scene. In order to examine the influence of scene configuration (distributed vs. grouped arrangement of task-relevant objects) on allocentric coding, we compared the present data with our previously published data set (Klinghammer et al., 2015). We found that reaching errors systematically deviated in the direction of object shifts, but only when the objects were task-relevant and their reliability was high. However, this effect was substantially reduced when task-relevant objects were distributed across the scene leading to a larger target-cue distance compared to a grouped configuration. No deviations of reach endpoints were observed in conditions with shifts of only task-irrelevant objects or with low object reliability irrespective of task

  9. 40 CFR 2.302 - Special rules governing certain information obtained under the Clean Water Act.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... information obtained under the Clean Water Act. 2.302 Section 2.302 Protection of Environment ENVIRONMENTAL... governing certain information obtained under the Clean Water Act. (a) Definitions. For the purposes of this section: (1) Act means the Clean Water Act, as amended, 33 U.S.C. 1251 et seq. (2)(i) Effluent data means...

  10. Identification of Classified Information in Unclassified DoD Systems During the Audit of Internal Controls and Data Reliability in the Deployable Disbursing System

    DTIC Science & Technology

    2009-02-17

    Identification of Classified Information in Unclassified DoD Systems During the Audit of Internal Controls and Data Reliability in the Deployable...TITLE AND SUBTITLE Identification of Classified Information in Unclassified DoD Systems During the Audit of Internal Controls and Data Reliability...Systems During the Audit ofInternal Controls and Data Reliability in the Deployable Disbursing System (Report No. D-2009-054) Weare providing this

  11. Epistemic Trust and Education: Effects of Informant Reliability on Student Learning of Decimal Concepts

    ERIC Educational Resources Information Center

    Durkin, Kelley; Shafto, Patrick

    2016-01-01

    The epistemic trust literature emphasizes that children's evaluations of informants' trustworthiness affects learning, but there is no evidence that epistemic trust affects learning in academic domains. The current study investigated how reliability affects decimal learning. Fourth and fifth graders (N = 122; M[subscript age] = 10.1 years)…

  12. Accurately Decoding Visual Information from fMRI Data Obtained in a Realistic Virtual Environment

    DTIC Science & Technology

    2015-06-09

    Center for Learning and Memory , The University of Texas at Austin, 100 E 24th Street, Stop C7000, Austin, TX 78712, USA afloren@utexas.edu Received: 18...information from fMRI data obtained in a realistic virtual environment. Front. Hum. Neurosci. 9:327. doi: 10.3389/fnhum.2015.00327 Accurately decoding...visual information from fMRI data obtained in a realistic virtual environment Andrew Floren 1*, Bruce Naylor 2, Risto Miikkulainen 3 and David Ress 4

  13. 32 CFR Appendix G to Part 275 - Releasing Information Obtained From Financial Institutions

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... FINANCIAL PRIVACY ACT OF 1978 Pt. 275, App. G Appendix G to Part 275—Releasing Information Obtained From... record was obtained pursuant to the Right to Financial Privacy Act of 1978, 12 U.S.C. 3401 et seq., and... transferring law enforcement office, personnel security element, or intelligence organization, or designee...

  14. Automatic training and reliability estimation for 3D ASM applied to cardiac MRI segmentation

    NASA Astrophysics Data System (ADS)

    Tobon-Gomez, Catalina; Sukno, Federico M.; Butakoff, Constantine; Huguet, Marina; Frangi, Alejandro F.

    2012-07-01

    Training active shape models requires collecting manual ground-truth meshes in a large image database. While shape information can be reused across multiple imaging modalities, intensity information needs to be imaging modality and protocol specific. In this context, this study has two main purposes: (1) to test the potential of using intensity models learned from MRI simulated datasets and (2) to test the potential of including a measure of reliability during the matching process to increase robustness. We used a population of 400 virtual subjects (XCAT phantom), and two clinical populations of 40 and 45 subjects. Virtual subjects were used to generate simulated datasets (MRISIM simulator). Intensity models were trained both on simulated and real datasets. The trained models were used to segment the left ventricle (LV) and right ventricle (RV) from real datasets. Segmentations were also obtained with and without reliability information. Performance was evaluated with point-to-surface and volume errors. Simulated intensity models obtained average accuracy comparable to inter-observer variability for LV segmentation. The inclusion of reliability information reduced volume errors in hypertrophic patients (EF errors from 17 ± 57% to 10 ± 18% LV MASS errors from -27 ± 22 g to -14 ± 25 g), and in heart failure patients (EF errors from -8 ± 42% to -5 ± 14%). The RV model of the simulated images needs further improvement to better resemble image intensities around the myocardial edges. Both for real and simulated models, reliability information increased segmentation robustness without penalizing accuracy.

  15. Automatic training and reliability estimation for 3D ASM applied to cardiac MRI segmentation.

    PubMed

    Tobon-Gomez, Catalina; Sukno, Federico M; Butakoff, Constantine; Huguet, Marina; Frangi, Alejandro F

    2012-07-07

    Training active shape models requires collecting manual ground-truth meshes in a large image database. While shape information can be reused across multiple imaging modalities, intensity information needs to be imaging modality and protocol specific. In this context, this study has two main purposes: (1) to test the potential of using intensity models learned from MRI simulated datasets and (2) to test the potential of including a measure of reliability during the matching process to increase robustness. We used a population of 400 virtual subjects (XCAT phantom), and two clinical populations of 40 and 45 subjects. Virtual subjects were used to generate simulated datasets (MRISIM simulator). Intensity models were trained both on simulated and real datasets. The trained models were used to segment the left ventricle (LV) and right ventricle (RV) from real datasets. Segmentations were also obtained with and without reliability information. Performance was evaluated with point-to-surface and volume errors. Simulated intensity models obtained average accuracy comparable to inter-observer variability for LV segmentation. The inclusion of reliability information reduced volume errors in hypertrophic patients (EF errors from 17 ± 57% to 10 ± 18%; LV MASS errors from -27 ± 22 g to -14 ± 25 g), and in heart failure patients (EF errors from -8 ± 42% to -5 ± 14%). The RV model of the simulated images needs further improvement to better resemble image intensities around the myocardial edges. Both for real and simulated models, reliability information increased segmentation robustness without penalizing accuracy.

  16. Reliability of Space-Shuttle Pressure Vessels with Random Batch Effects

    NASA Technical Reports Server (NTRS)

    Feiveson, Alan H.; Kulkarni, Pandurang M.

    2000-01-01

    In this article we revisit the problem of estimating the joint reliability against failure by stress rupture of a group of fiber-wrapped pressure vessels used on Space-Shuttle missions. The available test data were obtained from an experiment conducted at the U.S. Department of Energy Lawrence Livermore Laboratory (LLL) in which scaled-down vessels were subjected to life testing at four accelerated levels of pressure. We estimate the reliability assuming that both the Shuttle and LLL vessels were chosen at random in a two-stage process from an infinite population with spools of fiber as the primary sampling unit. Two main objectives of this work are: (1) to obtain practical estimates of reliability taking into account random spool effects and (2) to obtain a realistic assessment of estimation accuracy under the random model. Here, reliability is calculated in terms of a 'system' of 22 fiber-wrapped pressure vessels, taking into account typical pressures and exposure times experienced by Shuttle vessels. Comparisons are made with previous studies. The main conclusion of this study is that, although point estimates of reliability are still in the 'comfort zone,' it is advisable to plan for replacement of the pressure vessels well before the expected Lifetime of 100 missions per Shuttle Orbiter. Under a random-spool model, there is simply not enough information in the LLL data to provide reasonable assurance that such replacement would not be necessary.

  17. 77 FR 37886 - Notice of Intent To Obtain Information Regarding Organizations Who Are Assisting African...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-25

    ... information regarding organizations active in this area, for the purpose of information sharing. SUMMARY: This notice announces that the U.S. Africa Command (AFRICOM) is seeking information about organizations, both... DEPARTMENT OF DEFENSE Office of the Secretary Notice of Intent To Obtain Information Regarding...

  18. Visual reliability and information rate in the retina of a nocturnal bee.

    PubMed

    Frederiksen, Rikard; Wcislo, William T; Warrant, Eric J

    2008-03-11

    Nocturnal animals relying on vision typically have eyes that are optically and morphologically adapted for both increased sensitivity and greater information capacity in dim light. Here, we investigate whether adaptations for increased sensitivity also are found in their photoreceptors by using closely related and fast-flying nocturnal and diurnal bees as model animals. The nocturnal bee Megalopta genalis is capable of foraging and homing by using visually discriminated landmarks at starlight intensities. Megalopta's near relative, Lasioglossum leucozonium, performs these tasks only in bright sunshine. By recording intracellular responses to Gaussian white-noise stimuli, we show that photoreceptors in Megalopta actually code less information at most light levels than those in Lasioglossum. However, as in several other nocturnal arthropods, Megalopta's photoreceptors possess a much greater gain of transduction, indicating that nocturnal photoreceptors trade information capacity for sensitivity. By sacrificing photoreceptor signal-to-noise ratio and information capacity in dim light for an increased gain and, thus, an increased sensitivity, this strategy can benefit nocturnal insects that use neural summation to improve visual reliability at night.

  19. Reliability training

    NASA Technical Reports Server (NTRS)

    Lalli, Vincent R. (Editor); Malec, Henry A. (Editor); Dillard, Richard B.; Wong, Kam L.; Barber, Frank J.; Barina, Frank J.

    1992-01-01

    Discussed here is failure physics, the study of how products, hardware, software, and systems fail and what can be done about it. The intent is to impart useful information, to extend the limits of production capability, and to assist in achieving low cost reliable products. A review of reliability for the years 1940 to 2000 is given. Next, a review of mathematics is given as well as a description of what elements contribute to product failures. Basic reliability theory and the disciplines that allow us to control and eliminate failures are elucidated.

  20. 76 FR 28434 - Notice of Disclosure of Confidential Business Information Obtained Under the Comprehensive...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-17

    ... Information Obtained Under the Comprehensive Environmental Response, Compensation and Liability Act to EPA Contractor Toeroek Associates Inc., and Their Subcontractor, Science Applications International Corp. AGENCY... disclose confidential business information (``CBI'') submitted to EPA Region 9 pursuant to CERCLA to EPA...

  1. Modeling Sensor Reliability in Fault Diagnosis Based on Evidence Theory

    PubMed Central

    Yuan, Kaijuan; Xiao, Fuyuan; Fei, Liguo; Kang, Bingyi; Deng, Yong

    2016-01-01

    Sensor data fusion plays an important role in fault diagnosis. Dempster–Shafer (D-R) evidence theory is widely used in fault diagnosis, since it is efficient to combine evidence from different sensors. However, under the situation where the evidence highly conflicts, it may obtain a counterintuitive result. To address the issue, a new method is proposed in this paper. Not only the statistic sensor reliability, but also the dynamic sensor reliability are taken into consideration. The evidence distance function and the belief entropy are combined to obtain the dynamic reliability of each sensor report. A weighted averaging method is adopted to modify the conflict evidence by assigning different weights to evidence according to sensor reliability. The proposed method has better performance in conflict management and fault diagnosis due to the fact that the information volume of each sensor report is taken into consideration. An application in fault diagnosis based on sensor fusion is illustrated to show the efficiency of the proposed method. The results show that the proposed method improves the accuracy of fault diagnosis from 81.19% to 89.48% compared to the existing methods. PMID:26797611

  2. 75 FR 76479 - Notice of Proposed Information Collection for Public Comment; Procedure for Obtaining...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-08

    ... appropriate automated collection techniques or other forms of information technology; e.g., permitting... Information Collection for Public Comment; Procedure for Obtaining Certificates of Insurance for Capital... toll-free number) or e-mail Ms. [email protected] . Persons with hearing or speech impairments...

  3. Assuring reliability program effectiveness.

    NASA Technical Reports Server (NTRS)

    Ball, L. W.

    1973-01-01

    An attempt is made to provide simple identification and description of techniques that have proved to be most useful either in developing a new product or in improving reliability of an established product. The first reliability task is obtaining and organizing parts failure rate data. Other tasks are parts screening, tabulation of general failure rates, preventive maintenance, prediction of new product reliability, and statistical demonstration of achieved reliability. Five principal tasks for improving reliability involve the physics of failure research, derating of internal stresses, control of external stresses, functional redundancy, and failure effects control. A final task is the training and motivation of reliability specialist engineers.

  4. Probability interpretations of intraclass reliabilities.

    PubMed

    Ellis, Jules L

    2013-11-20

    Research where many organizations are rated by different samples of individuals such as clients, patients, or employees frequently uses reliabilities computed from intraclass correlations. Consumers of statistical information, such as patients and policy makers, may not have sufficient background for deciding which levels of reliability are acceptable. It is shown that the reliability is related to various probabilities that may be easier to understand, for example, the proportion of organizations that will be classed significantly above (or below) the mean and the probability that an organization is classed correctly given that it is classed significantly above (or below) the mean. One can view these probabilities as the amount of information of the classification and the correctness of the classification. These probabilities have an inverse relationship: given a reliability, one can 'buy' correctness at the cost of informativeness and conversely. This article discusses how this can be used to make judgments about the required level of reliabilities. Copyright © 2013 John Wiley & Sons, Ltd.

  5. 40 CFR 2.304 - Special rules governing certain information obtained under the Safe Drinking Water Act.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... information obtained under the Safe Drinking Water Act. 2.304 Section 2.304 Protection of Environment... Special rules governing certain information obtained under the Safe Drinking Water Act. (a) Definitions. For the purposes of this section: (1) Act means the Safe Drinking Water Act, 42 U.S.C. 300f et seq. (2...

  6. 40 CFR 2.304 - Special rules governing certain information obtained under the Safe Drinking Water Act.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... information obtained under the Safe Drinking Water Act. 2.304 Section 2.304 Protection of Environment... Special rules governing certain information obtained under the Safe Drinking Water Act. (a) Definitions. For the purposes of this section: (1) Act means the Safe Drinking Water Act, 42 U.S.C. 300f et seq. (2...

  7. 49 CFR 835.11 - Obtaining Board accident reports, factual accident reports, and supporting information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Obtaining Board accident reports, factual accident reports, and supporting information. 835.11 Section 835.11 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD TESTIMONY OF BOARD EMPLOYEES § 835.11 Obtaining Board accident reports, factual...

  8. 49 CFR 835.11 - Obtaining Board accident reports, factual accident reports, and supporting information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Obtaining Board accident reports, factual accident reports, and supporting information. 835.11 Section 835.11 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD TESTIMONY OF BOARD EMPLOYEES § 835.11 Obtaining Board accident reports, factual...

  9. 49 CFR 835.11 - Obtaining Board accident reports, factual accident reports, and supporting information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Obtaining Board accident reports, factual accident reports, and supporting information. 835.11 Section 835.11 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD TESTIMONY OF BOARD EMPLOYEES § 835.11 Obtaining Board accident reports, factual...

  10. 49 CFR 835.11 - Obtaining Board accident reports, factual accident reports, and supporting information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Obtaining Board accident reports, factual accident reports, and supporting information. 835.11 Section 835.11 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD TESTIMONY OF BOARD EMPLOYEES § 835.11 Obtaining Board accident reports, factual...

  11. 41 CFR 102-192.40 - Where can we obtain more information about the classes of mail?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PROGRAMS 192-MAIL MANAGEMENT Introduction to this Part § 102-192.40 Where can we obtain more information... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Where can we obtain more information about the classes of mail? 102-192.40 Section 102-192.40 Public Contracts and Property Management...

  12. An exploration of how Mexican American WIC mothers obtain information about behaviors associated with childhood obesity risk

    PubMed Central

    Cole, Suzanne M.; McKenney-Shubert, Shannon J.; Jones, Sonya J.; Peterson, Karen E.

    2016-01-01

    Objective To explore how a sample of Mexican American mothers with preschool-aged children recruited from a Midwestern WIC clinic obtain information about 4 behaviors associated with childhood obesity risk: eating, physical activity, screen time and sleep. Methods One-on-1, structured interviews, in which participants were asked how they communicated with family, learned to take care of their first infant and obtained information about the 4 targeted behaviors for their preschool-aged child. Setting An urban WIC clinic in the Midwest. Participants Forty Mexican-descent WIC mothers with children ages 3–4. Phenomenon of Interest Exposure to information about the 4 targeted behaviors among Mexican-descent mothers participating in WIC. Analysis Quantitative and qualitative data were used to characterize and compare across participants. Results Participants primarily obtained information from their child’s maternal grandmother during their first child’s infancy and from health professionals for their preschool-aged child. Participants typically obtained information through interpersonal communication, television and magazines. Participants were most interested in healthy eating information and least interested in screen time information. Some participants did not seek information. Conclusions Participants engaged in different patterns of information seeking across their child’s development and the 4 behaviors, suggesting that future research should be behaviorally specific. Findings from this study suggest several hypotheses to test in future research. PMID:27876321

  13. Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program

    NASA Astrophysics Data System (ADS)

    Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward

    1993-08-01

    A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.

  14. Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program

    NASA Technical Reports Server (NTRS)

    Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward

    1993-01-01

    A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.

  15. Measurements using orthodontic analysis software on digital models obtained by 3D scans of plaster casts : Intrarater reliability and validity.

    PubMed

    Czarnota, Judith; Hey, Jeremias; Fuhrmann, Robert

    2016-01-01

    The purpose of this work was to determine the reliability and validity of measurements performed on digital models with a desktop scanner and analysis software in comparison with measurements performed manually on conventional plaster casts. A total of 20 pairs of plaster casts reflecting the intraoral conditions of 20 fully dentate individuals were digitized using a three-dimensional scanner (D700; 3Shape). A series of defined parameters were measured both on the resultant digital models with analysis software (Ortho Analyzer; 3Shape) and on the original plaster casts with a digital caliper (Digimatic CD-15DCX; Mitutoyo). Both measurement series were repeated twice and analyzed for intrarater reliability based on intraclass correlation coefficients (ICCs). The results from the digital models were evaluated for their validity against the casts by calculating mean-value differences and associated 95 % limits of agreement (Bland-Altman method). Statistically significant differences were identified via a paired t test. Significant differences were obtained for 16 of 24 tooth-width measurements, for 2 of 5 sites of contact-point displacement in the mandibular anterior segment, for overbite, for maxillary intermolar distance, for Little's irregularity index, and for the summation indices of maxillary and mandibular incisor width. Overall, however, both the mean differences between the results obtained on the digital models versus on the plaster casts and the dispersion ranges associated with these differences suggest that the deviations incurred by the digital measuring technique are not clinically significant. Digital models are adequately reproducible and valid to be employed for routine measurements in orthodontic practice.

  16. General Aviation Aircraft Reliability Study

    NASA Technical Reports Server (NTRS)

    Pettit, Duane; Turnbull, Andrew; Roelant, Henk A. (Technical Monitor)

    2001-01-01

    This reliability study was performed in order to provide the aviation community with an estimate of Complex General Aviation (GA) Aircraft System reliability. To successfully improve the safety and reliability for the next generation of GA aircraft, a study of current GA aircraft attributes was prudent. This was accomplished by benchmarking the reliability of operational Complex GA Aircraft Systems. Specifically, Complex GA Aircraft System reliability was estimated using data obtained from the logbooks of a random sample of the Complex GA Aircraft population.

  17. Identifying and Understanding Valid Sustainability Information: The Crossroads of Evidence-Based Practice, Science Literacy, and Information Literacy

    ERIC Educational Resources Information Center

    Hare, Richard Gabriel; Jo, Jihoon; Moreton, Elizabeth; Stamm, Andrew; Winter, Danielle

    2011-01-01

    Obtaining reliable information is essential to forming a balanced understanding of the scope and complexity of environmental sustainability, and it is essential for effective participation, decision-making, and research in sustainability-related activities. While the ACRL Standards for Information Literacy (2000) are a good guiding principle for…

  18. Perceptual and Acoustic Reliability Estimates for the Speech Disorders Classification System (SDCS)

    ERIC Educational Resources Information Center

    Shriberg, Lawrence D.; Fourakis, Marios; Hall, Sheryl D.; Karlsson, Heather B.; Lohmeier, Heather L.; McSweeny, Jane L.; Potter, Nancy L.; Scheer-Cohen, Alison R.; Strand, Edythe A.; Tilkens, Christie M.; Wilson, David L.

    2010-01-01

    A companion paper describes three extensions to a classification system for paediatric speech sound disorders termed the Speech Disorders Classification System (SDCS). The SDCS uses perceptual and acoustic data reduction methods to obtain information on a speaker's speech, prosody, and voice. The present paper provides reliability estimates for…

  19. An Exploration of How Mexican American WIC Mothers Obtain Information About Behaviors Associated With Childhood Obesity Risk.

    PubMed

    Davis, Rachel E; Cole, Suzanne M; McKenney-Shubert, Shannon J; Jones, Sonya J; Peterson, Karen E

    2017-03-01

    To explore how a sample of Mexican American mothers with preschool-aged children recruited from a Midwestern Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) clinic obtained information about 4 behaviors associated with childhood obesity risk: eating, physical activity, screen time, and sleep. One-on-one structured interviews in which participants were asked how they communicated with family, learned to take care of their first infant, and obtained information about the 4 targeted behaviors for their preschool-aged child. An urban WIC clinic in the Midwest. Forty Mexican-descent mothers enrolled in WIC with children aged 3-4 years. Exposure to information about the 4 targeted behaviors among Mexican-descent mothers participating in WIC. Quantitative and qualitative data were used to characterize and compare across participants. Participants primarily obtained information from their child's maternal grandmother during their first child's infancy and from health professionals for their preschool-aged child. Participants typically obtained information through interpersonal communication, television, and magazines. Participants were most interested in healthy eating information and least interested in screen time information. Some participants did not seek information. Participants engaged in different patterns of information seeking across their child's development and the 4 behaviors, which suggests that future research should be behaviorally specific. Findings from this study suggest several hypotheses to test in future research. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  20. 24 CFR 5.905 - What special authority is there to obtain access to sex offender registration information?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... obtain access to sex offender registration information? 5.905 Section 5.905 Housing and Urban Development... access to sex offender registration information? (a) PHA obligation to obtain sex offender registration... applying for admission to any federally assisted housing program is subject to a lifetime sex offender...

  1. 24 CFR 5.905 - What special authority is there to obtain access to sex offender registration information?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... obtain access to sex offender registration information? 5.905 Section 5.905 Housing and Urban Development... access to sex offender registration information? (a) PHA obligation to obtain sex offender registration... applying for admission to any federally assisted housing program is subject to a lifetime sex offender...

  2. 24 CFR 5.905 - What special authority is there to obtain access to sex offender registration information?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... obtain access to sex offender registration information? 5.905 Section 5.905 Housing and Urban Development... access to sex offender registration information? (a) PHA obligation to obtain sex offender registration... applying for admission to any federally assisted housing program is subject to a lifetime sex offender...

  3. 24 CFR 5.905 - What special authority is there to obtain access to sex offender registration information?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... obtain access to sex offender registration information? 5.905 Section 5.905 Housing and Urban Development... access to sex offender registration information? (a) PHA obligation to obtain sex offender registration... applying for admission to any federally assisted housing program is subject to a lifetime sex offender...

  4. 24 CFR 5.905 - What special authority is there to obtain access to sex offender registration information?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... obtain access to sex offender registration information? 5.905 Section 5.905 Housing and Urban Development... access to sex offender registration information? (a) PHA obligation to obtain sex offender registration... applying for admission to any federally assisted housing program is subject to a lifetime sex offender...

  5. Development and reliability of a scale of physical-activity related informal social control for parents of Chinese pre-schoolers.

    PubMed

    Suen, Yi-Nam; Cerin, Ester; Mellecker, Robin R

    2014-07-18

    Parents' perceived informal social control, defined as the informal ways residents intervene to create a safe and orderly neighbourhood environment, may influence young children's physical activity (PA) in the neighbourhood. This study aimed to develop and test the reliability of a scale of PA-related informal social control relevant to Chinese parents/caregivers of pre-schoolers (children aged 3 to 5 years) living in Hong Kong. Nominal Group Technique (NGT), a structured, multi-step brainstorming technique, was conducted with two groups of caregivers (mainly parents; n = 11) of Hong Kong pre-schoolers in June 2011. Items collected in the NGT sessions and those generated by a panel of experts were used to compile a list of items (n = 22) for a preliminary version of a questionnaire of informal social control. The newly-developed scale was tested with 20 Chinese-speaking parents/caregivers using cognitive interviews (August 2011). The modified scale, including all 22 original items of which a few were slightly reworded, was subsequently administered on two occasions, a week apart, to 61 Chinese parents/caregivers of Hong Kong pre-schoolers in early 2012. The test-retest reliability and internal consistency of the items and scale were examined using intraclass correlation coefficients (ICC), paired t-tests, relative percentages of shifts in responses to items, and Cronbach's α coefficient. Thirteen items generated by parents/caregivers and nine items generated by the panel of experts (total 22 items) were included in a first working version of the scale and classified into three subscales: "Personal involvement and general informal supervision", "Civic engagement for the creation of a better neighbourhood environment" and "Educating and assisting neighbourhood children". Twenty out of 22 items showed moderate to excellent test-test reliability (ICC range: 0.40-0.81). All three subscales of informal social control showed acceptable levels of internal

  6. Report on Wind Turbine Subsystem Reliability - A Survey of Various Databases (Presentation)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sheng, S.

    2013-07-01

    Wind industry has been challenged by premature subsystem/component failures. Various reliability data collection efforts have demonstrated their values in supporting wind turbine reliability and availability research & development and industrial activities. However, most information on these data collection efforts are scattered and not in a centralized place. With the objective of getting updated reliability statistics of wind turbines and/or subsystems so as to benefit future wind reliability and availability activities, this report is put together based on a survey of various reliability databases that are accessible directly or indirectly by NREL. For each database, whenever feasible, a brief description summarizingmore » database population, life span, and data collected is given along with its features & status. Then selective results deemed beneficial to the industry and generated based on the database are highlighted. This report concludes with several observations obtained throughout the survey and several reliability data collection opportunities in the future.« less

  7. Handling Internet-Based Health Information: Improving Health Information Web Site Literacy Among Undergraduate Nursing Students.

    PubMed

    Wang, Weiwen; Sun, Ran; Mulvehill, Alice M; Gilson, Courtney C; Huang, Linda L

    2017-02-01

    Patient care problems arise when health care consumers and professionals find health information on the Internet because that information is often inaccurate. To mitigate this problem, nurses can develop Web literacy and share that skill with health care consumers. This study evaluated a Web-literacy intervention for undergraduate nursing students to find reliable Web-based health information. A pre- and postsurvey queried undergraduate nursing students in an informatics course; the intervention comprised lecture, in-class practice, and assignments about health Web site evaluation tools. Data were analyzed using Wilcoxon and ANOVA signed-rank tests. Pre-intervention, 75.9% of participants reported using Web sites to obtain health information. Postintervention, 87.9% displayed confidence in using an evaluation tool. Both the ability to critique health Web sites (p = .005) and confidence in finding reliable Internet-based health information (p = .058) increased. Web-literacy education guides nursing students to find, evaluate, and use reliable Web sites, which improves their ability to deliver safer patient care. [J Nurs Educ. 2017;56(2):110-114.]. Copyright 2017, SLACK Incorporated.

  8. Development of a Tablet-based symbol digit modalities test for reliably assessing information processing speed in patients with stroke.

    PubMed

    Tung, Li-Chen; Yu, Wan-Hui; Lin, Gong-Hong; Yu, Tzu-Ying; Wu, Chien-Te; Tsai, Chia-Yin; Chou, Willy; Chen, Mei-Hsiang; Hsieh, Ching-Lin

    2016-09-01

    To develop a Tablet-based Symbol Digit Modalities Test (T-SDMT) and to examine the test-retest reliability and concurrent validity of the T-SDMT in patients with stroke. The study had two phases. In the first phase, six experts, nine college students and five outpatients participated in the development and testing of the T-SDMT. In the second phase, 52 outpatients were evaluated twice (2 weeks apart) with the T-SDMT and SDMT to examine the test-retest reliability and concurrent validity of the T-SDMT. The T-SDMT was developed via expert input and college student/patient feedback. Regarding test-retest reliability, the practise effects of the T-SDMT and SDMT were both trivial (d=0.12) but significant (p≦0.015). The improvement in the T-SDMT (4.7%) was smaller than that in the SDMT (5.6%). The minimal detectable changes (MDC%) of the T-SDMT and SDMT were 6.7 (22.8%) and 10.3 (32.8%), respectively. The T-SDMT and SDMT were highly correlated with each other at the two time points (Pearson's r=0.90-0.91). The T-SDMT demonstrated good concurrent validity with the SDMT. Because the T-SDMT had a smaller practise effect and less random measurement error (superior test-retest reliability), it is recommended over the SDMT for assessing information processing speed in patients with stroke. Implications for Rehabilitation The Symbol Digit Modalities Test (SDMT), a common measure of information processing speed, showed a substantial practise effect and considerable random measurement error in patients with stroke. The Tablet-based SDMT (T-SDMT) has been developed to reduce the practise effect and random measurement error of the SDMT in patients with stroke. The T-SDMT had smaller practise effect and random measurement error than the SDMT, which can provide more reliable assessments of information processing speed.

  9. 2017 NREL Photovoltaic Reliability Workshop

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurtz, Sarah

    NREL's Photovoltaic (PV) Reliability Workshop (PVRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology -- both critical goals for moving PV technologies deeper into the electricity marketplace.

  10. Implementation of a combined algorithm designed to increase the reliability of information systems: simulation modeling

    NASA Astrophysics Data System (ADS)

    Popov, A.; Zolotarev, V.; Bychkov, S.

    2016-11-01

    This paper examines the results of experimental studies of a previously submitted combined algorithm designed to increase the reliability of information systems. The data that illustrates the organization and conduct of the studies is provided. Within the framework of a comparison of As a part of the study conducted, the comparison of the experimental data of simulation modeling and the data of the functioning of the real information system was made. The hypothesis of the homogeneity of the logical structure of the information systems was formulated, thus enabling to reconfigure the algorithm presented, - more specifically, to transform it into the model for the analysis and prediction of arbitrary information systems. The results presented can be used for further research in this direction. The data of the opportunity to predict the functioning of the information systems can be used for strategic and economic planning. The algorithm can be used as a means for providing information security.

  11. Reliability and Validity of the Dyadic Observed Communication Scale (DOCS).

    PubMed

    Hadley, Wendy; Stewart, Angela; Hunter, Heather L; Affleck, Katelyn; Donenberg, Geri; Diclemente, Ralph; Brown, Larry K

    2013-02-01

    We evaluated the reliability and validity of the Dyadic Observed Communication Scale (DOCS) coding scheme, which was developed to capture a range of communication components between parents and adolescents. Adolescents and their caregivers were recruited from mental health facilities for participation in a large, multi-site family-based HIV prevention intervention study. Seventy-one dyads were randomly selected from the larger study sample and coded using the DOCS at baseline. Preliminary validity and reliability of the DOCS was examined using various methods, such as comparing results to self-report measures and examining interrater reliability. Results suggest that the DOCS is a reliable and valid measure of observed communication among parent-adolescent dyads that captures both verbal and nonverbal communication behaviors that are typical intervention targets. The DOCS is a viable coding scheme for use by researchers and clinicians examining parent-adolescent communication. Coders can be trained to reliably capture individual and dyadic components of communication for parents and adolescents and this complex information can be obtained relatively quickly.

  12. 40 CFR 2.303 - Special rules governing certain information obtained under the Noise Control Act of 1972.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... information obtained under the Noise Control Act of 1972. 2.303 Section 2.303 Protection of Environment... Special rules governing certain information obtained under the Noise Control Act of 1972. (a) Definitions. For the purposes of this section: (1) Act means the Noise Control Act of 1972, 42 U.S.C. 4901 et seq...

  13. 40 CFR 2.303 - Special rules governing certain information obtained under the Noise Control Act of 1972.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... information obtained under the Noise Control Act of 1972. 2.303 Section 2.303 Protection of Environment... Special rules governing certain information obtained under the Noise Control Act of 1972. (a) Definitions. For the purposes of this section: (1) Act means the Noise Control Act of 1972, 42 U.S.C. 4901 et seq...

  14. Cue reliability and a landmark stability heuristic determine relative weighting between egocentric and allocentric visual information in memory-guided reach.

    PubMed

    Byrne, Patrick A; Crawford, J Douglas

    2010-06-01

    It is not known how egocentric visual information (location of a target relative to the self) and allocentric visual information (location of a target relative to external landmarks) are integrated to form reach plans. Based on behavioral data from rodents and humans we hypothesized that the degree of stability in visual landmarks would influence the relative weighting. Furthermore, based on numerous cue-combination studies we hypothesized that the reach system would act like a maximum-likelihood estimator (MLE), where the reliability of both cues determines their relative weighting. To predict how these factors might interact we developed an MLE model that weighs egocentric and allocentric information based on their respective reliabilities, and also on an additional stability heuristic. We tested the predictions of this model in 10 human subjects by manipulating landmark stability and reliability (via variable amplitude vibration of the landmarks and variable amplitude gaze shifts) in three reach-to-touch tasks: an egocentric control (reaching without landmarks), an allocentric control (reaching relative to landmarks), and a cue-conflict task (involving a subtle landmark "shift" during the memory interval). Variability from all three experiments was used to derive parameters for the MLE model, which was then used to simulate egocentric-allocentric weighting in the cue-conflict experiment. As predicted by the model, landmark vibration--despite its lack of influence on pointing variability (and thus allocentric reliability) in the control experiment--had a strong influence on egocentric-allocentric weighting. A reduced model without the stability heuristic was unable to reproduce this effect. These results suggest heuristics for extrinsic cue stability are at least as important as reliability for determining cue weighting in memory-guided reaching.

  15. Adapting the content of cancer web sites to the information needs of patients: reliability and readability.

    PubMed

    Alba-Ruiz, Ruben; Bermúdez-Tamayo, Clara; Pernett, Jaime Jiménez; Garcia-Gutierrez, Jose Francisco; Cózar-Olmo, José Manuel; Valero-Aguilera, Beatriz

    2013-12-01

    People who use the Internet to research health topics do not usually find all the information they need and do not trust what they read. This study was designed to assess the reliability, accessibility, readability, and popularity of cancer Web sites in Spanish and to analyze the suitability of Web site content in accordance with the specific information needs of cancer patients. This was a two-phase, cross-sectional, descriptive study. The first phase involved data gathering through online searches and direct observation. The second phase involved individual structured interviews with 169 patients with breast, prostate, bladder, and kidney cancer. Spearman rank correlations were calculated between variables. Most sites belonged to nonprofit organizations, followed by universities or medical centers (14%). Thirty-one percent of the Web sites had quality seals, 59% provided details of authorship, 62% provided references to bibliographic sources, 38% identified their funding sources, and 54% showed the date of their last update. Twenty-one percent of the Web sites did not meet the minimum accessibility criteria. With regard to readability, 24% of the texts were considered to be "quite difficult." Patients' information needs vary depending on the type of cancer they have, although all patients want to know about the likelihood of a cure, survival rates, the side effects, and risks of treatment. The health information on cancer available on the Internet in Spanish is not very reliable, accessible, or readable and is not necessarily the information that breast, kidney, prostate, and bladder cancer patients require. The content of cancer Web sites needs to be assessed according to the information needs of patients.

  16. Adapting the Content of Cancer Web Sites to the Information Needs of Patients: Reliability and Readability

    PubMed Central

    Bermúdez-Tamayo, Clara; Pernett, Jaime Jiménez; Garcia-Gutierrez, Jose Francisco; Cózar-Olmo, José Manuel; Valero-Aguilera, Beatriz

    2013-01-01

    Abstract Background: People who use the Internet to research health topics do not usually find all the information they need and do not trust what they read. This study was designed to assess the reliability, accessibility, readability, and popularity of cancer Web sites in Spanish and to analyze the suitability of Web site content in accordance with the specific information needs of cancer patients. Materials and Methods: This was a two-phase, cross-sectional, descriptive study. The first phase involved data gathering through online searches and direct observation. The second phase involved individual structured interviews with 169 patients with breast, prostate, bladder, and kidney cancer. Spearman rank correlations were calculated between variables. Results: Most sites belonged to nonprofit organizations, followed by universities or medical centers (14%). Thirty-one percent of the Web sites had quality seals, 59% provided details of authorship, 62% provided references to bibliographic sources, 38% identified their funding sources, and 54% showed the date of their last update. Twenty-one percent of the Web sites did not meet the minimum accessibility criteria. With regard to readability, 24% of the texts were considered to be “quite difficult.” Patients' information needs vary depending on the type of cancer they have, although all patients want to know about the likelihood of a cure, survival rates, the side effects, and risks of treatment. Conclusions: The health information on cancer available on the Internet in Spanish is not very reliable, accessible, or readable and is not necessarily the information that breast, kidney, prostate, and bladder cancer patients require. The content of cancer Web sites needs to be assessed according to the information needs of patients. PMID:24073899

  17. 42 CFR 478.24 - Opportunity for a party to obtain and submit information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Opportunity for a party to obtain and submit information. 478.24 Section 478.24 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS RECONSIDERATIONS AND APPEALS...

  18. 42 CFR 478.24 - Opportunity for a party to obtain and submit information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 4 2014-10-01 2014-10-01 false Opportunity for a party to obtain and submit information. 478.24 Section 478.24 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS RECONSIDERATIONS AND APPEALS...

  19. 42 CFR 478.24 - Opportunity for a party to obtain and submit information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 4 2013-10-01 2013-10-01 false Opportunity for a party to obtain and submit information. 478.24 Section 478.24 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS RECONSIDERATIONS AND APPEALS...

  20. 42 CFR 478.24 - Opportunity for a party to obtain and submit information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 4 2012-10-01 2012-10-01 false Opportunity for a party to obtain and submit information. 478.24 Section 478.24 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS RECONSIDERATIONS AND APPEALS...

  1. 40 CFR 2.302 - Special rules governing certain information obtained under the Clean Water Act.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... provide the information was issued under section 309(a)(3) of the Act, 33 U.S.C. 1319(a)(3), whether a civil action was brought under section 309(b) of the Act, 33 U.S.C. 1319(b), and whether the information... specifically does not apply to information obtained under section 310(d) or 312(g)(3) of the Act, 33 U.S.C...

  2. 40 CFR 2.302 - Special rules governing certain information obtained under the Clean Water Act.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... provide the information was issued under section 309(a)(3) of the Act, 33 U.S.C. 1319(a)(3), whether a civil action was brought under section 309(b) of the Act, 33 U.S.C. 1319(b), and whether the information... specifically does not apply to information obtained under section 310(d) or 312(g)(3) of the Act, 33 U.S.C...

  3. 40 CFR 2.302 - Special rules governing certain information obtained under the Clean Water Act.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... provide the information was issued under section 309(a)(3) of the Act, 33 U.S.C. 1319(a)(3), whether a civil action was brought under section 309(b) of the Act, 33 U.S.C. 1319(b), and whether the information... specifically does not apply to information obtained under section 310(d) or 312(g)(3) of the Act, 33 U.S.C...

  4. "Negotiorum Gestio" in Family Medicine, Informed Consent Obtainment, and Disciplinary Responsibility.

    PubMed

    Birkeland, Søren

    2016-01-01

    Introduction. Negotiorum gestio (NG) denotes an action where a person well intendedly acts on behalf of another without obtaining the latter's prior consent. In broad terms, NG-like actions have played a considerable role in health care provision. In some settings, health care delivery with only little or presumed patients' consent has been the rule rather than the exception. However, bioethical principles regarding patient autonomy and obtainment of the patient's informed consent (IC) before intervention are now increasingly materialized in the law of many countries. Aim. To study legal consequences of NG in family medicine and IC handling options. Methods. Case law examination. Results. A disciplinary board case is described concerning a family doctor conducting unlawful NG by not coming up to legal IC requirements. Discussion and Conclusion. The practical and legal implications of IC and possible role of novel Shared Decision-Making approaches in coming up to regulation and bioethical demands are discussed. It is concluded that a doctor may run an unnecessary legal risk when conducting NG in decision-competent patients and furthermore it is suggested that novel Shared Decision-Making approaches could help in obtaining a rightful and practicable IC.

  5. Where Non-Science Majors Get Information about Science and How They Rate that Information

    NASA Astrophysics Data System (ADS)

    Buxner, Sanlyn; Impey, Chris; Nieberding, Megan; Romine, James

    2014-11-01

    College non-science major courses represent one of the last science courses many students will ever take. We report on a study of 400 undergraduate non-majors students enrolled in introductory astronomy courses at the University of Arizona to gain insight into where they get their information about science and their perception of that information. Students completed an online survey during the 2013-2014 school year. In addition to demographic information, students reported where they obtained information about science when they want to know something both for their own knowledge as well as information for a course assignment. They reported their interest in different science topics, rated the reliability of different sources of information, and reported how important science was to their life, including their future career choice.Overall, students reported getting information from a variety of online sources when looking up a topic for their own knowledge, including internet searches (71%), Wikipedia (46%), and online science sites (e.g. NASA) (45%). When asked where they got information for course assignments, most reported from assigned readings (82%) but a large percentage still reported getting information from online sources such as internet searches (60%), Wikipedia (30%) and online science sites (e.g. NASA) (20%). Overall, students rated professors/teachers and textbooks at the most reliable sources of scientific information and rated social media sites, blogs and Wikipedia as the least reliable sources of scientific information. Additionally, friends and family members were rated as less reliable sources of scientific information than similar information found on multiple websites. Students’ interest in science and self-reported knowledge in science was positively correlated. There was a significant positive correlation between those who reported that they liked science and felt that science was important to their future career. Overall, our results are

  6. The perspectives of researchers on obtaining informed consent in developing countries.

    PubMed

    Newton, Sam K; Appiah-Poku, John

    2007-04-01

    The doctrine of informed consent (IC) exists to protect individuals from exploitation or harm. This study into IC was carried out to investigate how different researchers perceived the process whereby researchers obtained consent. It also examined researchers' perspectives on what constituted IC, and how different settings influenced the process. The study recorded in-depth interviews with 12 lecturers and five doctoral students, who had carried out research in developing countries, at a leading school of public health in the United Kingdom. A purposive, snowballing approach was used to identify interviewees. Although the concept and application of the doctrine of IC should have been the same, irrespective of where the research was carried out, the process of obtaining it had to be different. The setting had to be taken into consideration and the autonomy of the subject had to be respected at all times. In areas of high illiteracy, and where understanding of the subject was likely to be a problem, there was an added responsibility placed on the researcher to devise innovative ways of carrying out the study, taking into consideration the peculiarities of the environment. The ethical issues for IC were the same, irrespective of where the research was conducted. However, because the backgrounds, setting, and knowledge of populations differed, there was the need to be similarly sensitive in obtaining consent. The problems of obtaining genuine IC were not limited to developing countries.

  7. Approximation of reliabilities for multiple-trait model with maternal effects.

    PubMed

    Strabel, T; Misztal, I; Bertrand, J K

    2001-04-01

    Reliabilities for a multiple-trait maternal model were obtained by combining reliabilities obtained from single-trait models. Single-trait reliabilities were obtained using an approximation that supported models with additive and permanent environmental effects. For the direct effect, the maternal and permanent environmental variances were assigned to the residual. For the maternal effect, variance of the direct effect was assigned to the residual. Data included 10,550 birth weight, 11,819 weaning weight, and 3,617 postweaning gain records of Senepol cattle. Reliabilities were obtained by generalized inversion and by using single-trait and multiple-trait approximation methods. Some reliabilities obtained by inversion were negative because inbreeding was ignored in calculating the inverse of the relationship matrix. The multiple-trait approximation method reduced the bias of approximation when compared with the single-trait method. The correlations between reliabilities obtained by inversion and by multiple-trait procedures for the direct effect were 0.85 for birth weight, 0.94 for weaning weight, and 0.96 for postweaning gain. Correlations for maternal effects for birth weight and weaning weight were 0.96 to 0.98 for both approximations. Further improvements can be achieved by refining the single-trait procedures.

  8. 40 CFR 2.305 - Special rules governing certain information obtained under the Solid Waste Disposal Act, as amended.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... information obtained under the Solid Waste Disposal Act, as amended. 2.305 Section 2.305 Protection of... § 2.305 Special rules governing certain information obtained under the Solid Waste Disposal Act, as amended. (a) Definitions. For purposes of this section: (1) Act means the Solid Waste Disposal Act, as...

  9. 40 CFR 2.305 - Special rules governing certain information obtained under the Solid Waste Disposal Act, as amended.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... information obtained under the Solid Waste Disposal Act, as amended. 2.305 Section 2.305 Protection of... § 2.305 Special rules governing certain information obtained under the Solid Waste Disposal Act, as amended. (a) Definitions. For purposes of this section: (1) Act means the Solid Waste Disposal Act, as...

  10. Inter-rater reliability and aspects of validity of the parent-infant relationship global assessment scale (PIR-GAS)

    PubMed Central

    2013-01-01

    Background The Parent-Infant Relationship Global Assessment Scale (PIR-GAS) signifies a conceptually relevant development in the multi-axial, developmentally sensitive classification system DC:0-3R for preschool children. However, information about the reliability and validity of the PIR-GAS is rare. A review of the available empirical studies suggests that in research, PIR-GAS ratings can be based on a ten-minute videotaped interaction sequence. The qualification of raters may be very heterogeneous across studies. Methods To test whether the use of the PIR-GAS still allows for a reliable assessment of the parent-infant relationship, our study compared a PIR-GAS ratings based on a full-information procedure across multiple settings with ratings based on a ten-minute video by two doctoral candidates of medicine. For each mother-child dyad at a family day hospital (N = 48), we obtained two video ratings and one full-information rating at admission to therapy and at discharge. This pre-post design allowed for a replication of our findings across the two measurement points. We focused on the inter-rater reliability between the video coders, as well as between the video and full-information procedure, including mean differences and correlations between the raters. Additionally, we examined aspects of the validity of video and full-information ratings based on their correlation with measures of child and maternal psychopathology. Results Our results showed that a ten-minute video and full-information PIR-GAS ratings were not interchangeable. Most results at admission could be replicated by the data obtained at discharge. We concluded that a higher degree of standardization of the assessment procedure should increase the reliability of the PIR-GAS, and a more thorough theoretical foundation of the manual should increase its validity. PMID:23705962

  11. Reliability analysis of component of affination centrifugal 1 machine by using reliability engineering

    NASA Astrophysics Data System (ADS)

    Sembiring, N.; Ginting, E.; Darnello, T.

    2017-12-01

    Problems that appear in a company that produces refined sugar, the production floor has not reached the level of critical machine availability because it often suffered damage (breakdown). This results in a sudden loss of production time and production opportunities. This problem can be solved by Reliability Engineering method where the statistical approach to historical damage data is performed to see the pattern of the distribution. The method can provide a value of reliability, rate of damage, and availability level, of an machine during the maintenance time interval schedule. The result of distribution test to time inter-damage data (MTTF) flexible hose component is lognormal distribution while component of teflon cone lifthing is weibull distribution. While from distribution test to mean time of improvement (MTTR) flexible hose component is exponential distribution while component of teflon cone lifthing is weibull distribution. The actual results of the flexible hose component on the replacement schedule per 720 hours obtained reliability of 0.2451 and availability 0.9960. While on the critical components of teflon cone lifthing actual on the replacement schedule per 1944 hours obtained reliability of 0.4083 and availability 0.9927.

  12. 40 CFR 2.308 - Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic Act.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... information obtained under the Federal Food, Drug and Cosmetic Act. 2.308 Section 2.308 Protection of... § 2.308 Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic... Cosmetic Act, as amended, 21 U.S.C. 301 et seq. (2) Petition means a petition for the issuance of a...

  13. 40 CFR 2.308 - Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic Act.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... information obtained under the Federal Food, Drug and Cosmetic Act. 2.308 Section 2.308 Protection of... § 2.308 Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic... Cosmetic Act, as amended, 21 U.S.C. 301 et seq. (2) Petition means a petition for the issuance of a...

  14. 40 CFR 2.308 - Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic Act.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... information obtained under the Federal Food, Drug and Cosmetic Act. 2.308 Section 2.308 Protection of... § 2.308 Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic... Cosmetic Act, as amended, 21 U.S.C. 301 et seq. (2) Petition means a petition for the issuance of a...

  15. 40 CFR 2.308 - Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic Act.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... information obtained under the Federal Food, Drug and Cosmetic Act. 2.308 Section 2.308 Protection of... § 2.308 Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic... Cosmetic Act, as amended, 21 U.S.C. 301 et seq. (2) Petition means a petition for the issuance of a...

  16. 40 CFR 2.308 - Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic Act.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... information obtained under the Federal Food, Drug and Cosmetic Act. 2.308 Section 2.308 Protection of... § 2.308 Special rules governing certain information obtained under the Federal Food, Drug and Cosmetic... Cosmetic Act, as amended, 21 U.S.C. 301 et seq. (2) Petition means a petition for the issuance of a...

  17. Digital Avionics Information System (DAIS): Reliability and Maintainability Model Users Guide. Final Report, May 1975-July 1977.

    ERIC Educational Resources Information Center

    Czuchry, Andrew J.; And Others

    This report provides a complete guide to the stand alone mode operation of the reliability and maintenance (R&M) model, which was developed to facilitate the performance of design versus cost trade-offs within the digital avionics information system (DAIS) acquisition process. The features and structure of the model, its input data…

  18. Increasing reliability of APACHE II scores in a medical-surgical intensive care unit: a quality improvement study.

    PubMed

    Donahoe, Laura; McDonald, Ellen; Kho, Michelle E; Maclennan, Margaret; Stratford, Paul W; Cook, Deborah J

    2009-01-01

    Given their clinical, research, and administrative purposes, scores on the Acute Physiology and Chronic Health Evaluation (APACHE) II should be reliable, whether calculated by health care personnel or a clinical information system. To determine reliability of APACHE II scores calculated by a clinical information system and by health care personnel before and after a multifaceted quality improvement intervention. APACHE II scores of 37 consecutive patients admitted to a closed, 15-bed, university-affiliated intensive care unit were collected by a research coordinator, a database clerk, and a clinical information system. After a quality improvement intervention focused on health care personnel and the clinical information system, the same methods were used to collect data on 32 consecutive patients. The research coordinator and the clerk did not know each other's scores or the information system's score. The data analyst did not know the source of the scores until analysis was complete. APACHE II scores obtained by the clerk and the research coordinator were highly reliable (intraclass correlation coefficient, 0.88 before vs 0.80 after intervention; P = .25). No significant changes were detected after the intervention; however, compared with scores of the research coordinator, the overall reliability of APACHE II scores calculated by the clinical information system improved (intraclass correlation coefficient, 0.24 before intervention vs 0.91 after intervention, P < .001). After completion of a quality improvement intervention, health care personnel and a computerized clinical information system calculated sufficiently reliable APACHE II scores for clinical, research, and administrative purposes.

  19. 2016 NREL Photovoltaic Module Reliability Workshop

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurtz, Sarah

    NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology - both critical goals for moving PV technologies deeper into the electricity marketplace.

  20. 2015 NREL Photovoltaic Module Reliability Workshops

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurtz, Sarah

    NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

  1. Allegations of Failure to Obtain Informed Consent in Spinal Surgery Medical Malpractice Claims

    PubMed Central

    Grauberger, Jennifer; Kerezoudis, Panagiotis; Choudhry, Asad J.; Alvi, Mohammed Ali; Nassr, Ahmad; Currier, Bradford

    2017-01-01

    Importance Predictive factors associated with increased risk of medical malpractice litigation have been identified, including severity of injury, physician sex, and error in diagnosis. However, there is a paucity of literature investigating informed consent in spinal surgery malpractice. Objective To investigate the failure to obtain informed consent as an allegation in medical malpractice claims for patients undergoing a spinal procedure. Design, Setting, and Participants In this retrospective cohort study, a national medicolegal database was searched for malpractice claim cases related to spinal surgery for all years available (ie, January 1, 1980, through December 31, 2015). Main Outcomes and Measures Failure to obtain informed consent and associated medical malpractice case verdict. Results A total of 233 patients (117 [50.4%] male and 116 [49.8%] female; 80 with no informed consent allegation and 153 who cited lack of informed consent) who underwent spinal surgery and filed a malpractice claim were studied (mean [SD] age, 47.1 [13.1] years in the total group, 45.8 [12.9] years in the control group, and 47.9 [13.3] years in the informed consent group). Median interval between year of surgery and year of verdict was 5.4 years (interquartile range, 4-7 years). The most common informed consent allegations were failure to explain risks and adverse effects of surgery (52 [30.4%]) and failure to explain alternative treatment options (17 [9.9%]). In bivariate analysis, patients in the control group were more likely to require additional surgery (45 [56.3%] vs 53 [34.6%], P = .002) and have more permanent injuries compared with the informed consent group (46 [57.5%] vs 63 [42.0%], P = .03). On multivariable regression analysis, permanent injuries were more often associated with indemnity payment after a plaintiff verdict (odds ratio [OR], 3.12; 95% CI, 1.46-6.65; P = .003) or a settlement (OR, 6.26; 95% CI, 1.06-36.70; P = .04). Informed consent

  2. Allegations of Failure to Obtain Informed Consent in Spinal Surgery Medical Malpractice Claims.

    PubMed

    Grauberger, Jennifer; Kerezoudis, Panagiotis; Choudhry, Asad J; Alvi, Mohammed Ali; Nassr, Ahmad; Currier, Bradford; Bydon, Mohamad

    2017-06-21

    Predictive factors associated with increased risk of medical malpractice litigation have been identified, including severity of injury, physician sex, and error in diagnosis. However, there is a paucity of literature investigating informed consent in spinal surgery malpractice. To investigate the failure to obtain informed consent as an allegation in medical malpractice claims for patients undergoing a spinal procedure. In this retrospective cohort study, a national medicolegal database was searched for malpractice claim cases related to spinal surgery for all years available (ie, January 1, 1980, through December 31, 2015). Failure to obtain informed consent and associated medical malpractice case verdict. A total of 233 patients (117 [50.4%] male and 116 [49.8%] female; 80 with no informed consent allegation and 153 who cited lack of informed consent) who underwent spinal surgery and filed a malpractice claim were studied (mean [SD] age, 47.1 [13.1] years in the total group, 45.8 [12.9] years in the control group, and 47.9 [13.3] years in the informed consent group). Median interval between year of surgery and year of verdict was 5.4 years (interquartile range, 4-7 years). The most common informed consent allegations were failure to explain risks and adverse effects of surgery (52 [30.4%]) and failure to explain alternative treatment options (17 [9.9%]). In bivariate analysis, patients in the control group were more likely to require additional surgery (45 [56.3%] vs 53 [34.6%], P = .002) and have more permanent injuries compared with the informed consent group (46 [57.5%] vs 63 [42.0%], P = .03). On multivariable regression analysis, permanent injuries were more often associated with indemnity payment after a plaintiff verdict (odds ratio [OR], 3.12; 95% CI, 1.46-6.65; P = .003) or a settlement (OR, 6.26; 95% CI, 1.06-36.70; P = .04). Informed consent allegations were significantly associated with less severe (temporary or emotional) injury (OR

  3. A new approach to power quality and electricity reliability monitoring-case study illustrations of the capabilities of the I-GridTM system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Divan, Deepak; Brumsickle, William; Eto, Joseph

    2003-04-01

    This report describes a new approach for collecting information on power quality and reliability and making it available in the public domain. Making this information readily available in a form that is meaningful to electricity consumers is necessary for enabling more informed private and public decisions regarding electricity reliability. The system dramatically reduces the cost (and expertise) needed for customers to obtain information on the most significant power quality events, called voltage sags and interruptions. The system also offers widespread access to information on power quality collected from multiple sites and the potential for capturing information on the impacts ofmore » power quality problems, together enabling a wide variety of analysis and benchmarking to improve system reliability. Six case studies demonstrate selected functionality and capabilities of the system, including: Linking measured power quality events to process interruption and downtime; Demonstrating the ability to correlate events recorded by multiple monitors to narrow and confirm the causes of power quality events; and Benchmarking power quality and reliability on a firm and regional basis.« less

  4. Understanding of how older adults with low vision obtain, process, and understand health information and services.

    PubMed

    Kim, Hyung Nam

    2017-10-16

    Twenty-five years after the Americans with Disabilities Act, there has still been a lack of advancement of accessibility in healthcare for people with visual impairments, particularly older adults with low vision. This study aims to advance understanding of how older adults with low vision obtain, process, and use health information and services, and to seek opportunities of information technology to support them. A convenience sample of 10 older adults with low vision participated in semi-structured phone interviews, which were audio-recorded and transcribed verbatim for analysis. Participants shared various concerns in accessing, understanding, and using health information, care services, and multimedia technologies. Two main themes and nine subthemes emerged from the analysis. Due to the concerns, older adults with low vision tended to fail to obtain the full range of all health information and services to meet their specific needs. Those with low vision still rely on residual vision such that multimedia-based information which can be useful, but it should still be designed to ensure its accessibility, usability, and understandability.

  5. Critical assessment of pediatric neurosurgery patient/parent educational information obtained via the Internet.

    PubMed

    Garcia, Michael; Daugherty, Christopher; Ben Khallouq, Bertha; Maugans, Todd

    2018-05-01

    OBJECTIVE The Internet is used frequently by patients and family members to acquire information about pediatric neurosurgical conditions. The sources, nature, accuracy, and usefulness of this information have not been examined recently. The authors analyzed the results from searches of 10 common pediatric neurosurgical terms using a novel scoring test to assess the value of the educational information obtained. METHODS Google and Bing searches were performed for 10 common pediatric neurosurgical topics (concussion, craniosynostosis, hydrocephalus, pediatric brain tumor, pediatric Chiari malformation, pediatric epilepsy surgery, pediatric neurosurgery, plagiocephaly, spina bifida, and tethered spinal cord). The first 10 "hits" obtained with each search engine were analyzed using the Currency, Relevance, Authority, Accuracy, and Purpose (CRAAP) test, which assigns a numerical score in each of 5 domains. Agreement between results was assessed for 1) concurrent searches with Google and Bing; 2) Google searches over time (6 months apart); 3) Google searches using mobile and PC platforms concurrently; and 4) searches using privacy settings. Readability was assessed with an online analytical tool. RESULTS Google and Bing searches yielded information with similar CRAAP scores (mean 72% and 75%, respectively), but with frequently differing results (58% concordance/matching results). There was a high level of agreement (72% concordance) over time for Google searches and also between searches using general and privacy settings (92% concordance). Government sources scored the best in both CRAAP score and readability. Hospitals and universities were the most prevalent sources, but these sources had the lowest CRAAP scores, due in part to an abundance of self-marketing. The CRAAP scores for mobile and desktop platforms did not differ significantly (p = 0.49). CONCLUSIONS Google and Bing searches yielded useful educational information, using either mobile or PC platforms. Most

  6. Real-time reliability measure-driven multi-hypothesis tracking using 2D and 3D features

    NASA Astrophysics Data System (ADS)

    Zúñiga, Marcos D.; Brémond, François; Thonnat, Monique

    2011-12-01

    We propose a new multi-target tracking approach, which is able to reliably track multiple objects even with poor segmentation results due to noisy environments. The approach takes advantage of a new dual object model combining 2D and 3D features through reliability measures. In order to obtain these 3D features, a new classifier associates an object class label to each moving region (e.g. person, vehicle), a parallelepiped model and visual reliability measures of its attributes. These reliability measures allow to properly weight the contribution of noisy, erroneous or false data in order to better maintain the integrity of the object dynamics model. Then, a new multi-target tracking algorithm uses these object descriptions to generate tracking hypotheses about the objects moving in the scene. This tracking approach is able to manage many-to-many visual target correspondences. For achieving this characteristic, the algorithm takes advantage of 3D models for merging dissociated visual evidence (moving regions) potentially corresponding to the same real object, according to previously obtained information. The tracking approach has been validated using video surveillance benchmarks publicly accessible. The obtained performance is real time and the results are competitive compared with other tracking algorithms, with minimal (or null) reconfiguration effort between different videos.

  7. Two-dimensional wavelet transform for reliability-guided phase unwrapping in optical fringe pattern analysis.

    PubMed

    Li, Sikun; Wang, Xiangzhao; Su, Xianyu; Tang, Feng

    2012-04-20

    This paper theoretically discusses modulus of two-dimensional (2D) wavelet transform (WT) coefficients, calculated by using two frequently used 2D daughter wavelet definitions, in an optical fringe pattern analysis. The discussion shows that neither is good enough to represent the reliability of the phase data. The differences between the two frequently used 2D daughter wavelet definitions in the performance of 2D WT also are discussed. We propose a new 2D daughter wavelet definition for reliability-guided phase unwrapping of optical fringe pattern. The modulus of the advanced 2D WT coefficients, obtained by using a daughter wavelet under this new daughter wavelet definition, includes not only modulation information but also local frequency information of the deformed fringe pattern. Therefore, it can be treated as a good parameter that represents the reliability of the retrieved phase data. Computer simulation and experimentation show the validity of the proposed method.

  8. Extended Importance Sampling for Reliability Analysis under Evidence Theory

    NASA Astrophysics Data System (ADS)

    Yuan, X. K.; Chen, B.; Zhang, B. Q.

    2018-05-01

    In early engineering practice, the lack of data and information makes uncertainty difficult to deal with. However, evidence theory has been proposed to handle uncertainty with limited information as an alternative way to traditional probability theory. In this contribution, a simulation-based approach, called ‘Extended importance sampling’, is proposed based on evidence theory to handle problems with epistemic uncertainty. The proposed approach stems from the traditional importance sampling for reliability analysis under probability theory, and is developed to handle the problem with epistemic uncertainty. It first introduces a nominal instrumental probability density function (PDF) for every epistemic uncertainty variable, and thus an ‘equivalent’ reliability problem under probability theory is obtained. Then the samples of these variables are generated in a way of importance sampling. Based on these samples, the plausibility and belief (upper and lower bounds of probability) can be estimated. It is more efficient than direct Monte Carlo simulation. Numerical and engineering examples are given to illustrate the efficiency and feasible of the proposed approach.

  9. A reliability-based maintenance technicians' workloads optimisation model with stochastic consideration

    NASA Astrophysics Data System (ADS)

    Ighravwe, D. E.; Oke, S. A.; Adebiyi, K. A.

    2016-06-01

    The growing interest in technicians' workloads research is probably associated with the recent surge in competition. This was prompted by unprecedented technological development that triggers changes in customer tastes and preferences for industrial goods. In a quest for business improvement, this worldwide intense competition in industries has stimulated theories and practical frameworks that seek to optimise performance in workplaces. In line with this drive, the present paper proposes an optimisation model which considers technicians' reliability that complements factory information obtained. The information used emerged from technicians' productivity and earned-values using the concept of multi-objective modelling approach. Since technicians are expected to carry out routine and stochastic maintenance work, we consider these workloads as constraints. The influence of training, fatigue and experiential knowledge of technicians on workload management was considered. These workloads were combined with maintenance policy in optimising reliability, productivity and earned-values using the goal programming approach. Practical datasets were utilised in studying the applicability of the proposed model in practice. It was observed that our model was able to generate information that practicing maintenance engineers can apply in making more informed decisions on technicians' management.

  10. Effect of clinical information and previous exam execution on observer agreement and reliability in the analysis of hysteroscopic video-recordings.

    PubMed

    Martinho, Margarida Suzel Lopes; da Costa Santos, Cristina Maria Nogueira; Silva Carvalho, João Luís Mendonça; Bernardes, João Francisco Montenegro Andrade Lima

    2018-02-01

    Inter-observer agreement and reliability in hysteroscopic image assessment remain uncertain and the type of factors that may influence it has only been studied in relation to the experience of hysteroscopists. We aim to assess the effect of clinical information and previous exam execution on observer agreement and reliability in the analysis of hysteroscopic video-recordings. Ninety hysteroscopies were video-recorded and randomized into a group without (Group 1) and with clinical information (Group 2). The videos were independently analyzed by three hysteroscopists, regarding lesion location, dimension, and type, as well as decision to perform a biopsy. One of the hysteroscopists had executed all the exams before. Proportions of agreement (PA) and kappa statistics (κ) with 95% confidence intervals (95% CI) were used. In Group 2, there was a higher proportion of a normal diagnosis (p < 0.001) and a lower proportion of biopsies recommended (p = 0.027). Observer agreement and reliability were better in Group 2, with the PA and κ ranging, respectively, from 0.73 (95% CI 0.62, 0.83) and 0.44 (95% CI 0.26, 0.63), for image quality, to 0.94 (95% CI 0.88, 0.99) and 0.85 (95% CI 0.65, 0.95), for the decision to perform a biopsy. Execution of the exams before the analysis of the video-recordings did not significantly affect the results. With clinical information, agreement and reliability in the overall analysis of hysteroscopic video-recordings may reach almost perfect results and this was not significantly affected by the execution of the exams before the analysis. However, there is still uncertainty in the analysis of specific endometrial cavity abnormalities.

  11. Transforming Legacy Systems to Obtain Information Superiority

    DTIC Science & Technology

    2001-01-01

    is imperative that innovative technologies be developed to enable legacy weapon systems to exploit the information revolution, achieve information ... dominance , and meet the required operational tempo. This paper presents an embedded-system architecture, open system middleware services, and a software

  12. [The external evaluation of study quality: the role in maintaining the reliability of laboratory information].

    PubMed

    Men'shikov, V V

    2013-08-01

    The external evaluation of quality of clinical laboratory examinations was gradually introduced in USSR medical laboratories since 1970s. In Russia, in the middle of 1990 a unified all-national system of external evaluation quality was organized known as the Federal center of external evaluation of quality at the basis of laboratory of the state research center of preventive medicine. The main positions of policy in this area were neatly formulated in the guidance documents of ministry of Health. Nowadays, the center of external evaluation of quality proposes 100 and more types of control studies and permanently extends their specter starting from interests of different disciplines of clinical medicine. The consistent participation of laboratories in the cycles of external evaluation of quality intrinsically promotes improvement of indicators of properness and precision of analysis results and increases reliability of laboratory information. However, a significant percentage of laboratories does not participate at all in external evaluation of quality or takes part in control process irregularly and in limited number of tests. The managers of a number of medical organizations disregard the application of the proposed possibilities to increase reliability of laboratory information and limit financing of studies in the field of quality control. The article proposes to adopt the national standard on the basis of ISO 17043 "Evaluation of compliance. The common requirements of professional competence testing".

  13. Development of a Method to Obtain More Accurate General and Oral Health Related Information Retrospectively

    PubMed Central

    A, Golkari; A, Sabokseir; D, Blane; A, Sheiham; RG, Watt

    2017-01-01

    Statement of Problem: Early childhood is a crucial period of life as it affects one’s future health. However, precise data on adverse events during this period is usually hard to access or collect, especially in developing countries. Objectives: This paper first reviews the existing methods for retrospective data collection in health and social sciences, and then introduces a new method/tool for obtaining more accurate general and oral health related information from early childhood retrospectively. Materials and Methods: The Early Childhood Events Life-Grid (ECEL) was developed to collect information on the type and time of health-related adverse events during the early years of life, by questioning the parents. The validity of ECEL and the accuracy of information obtained by this method were assessed in a pilot study and in a main study of 30 parents of 8 to 11 year old children from Shiraz (Iran). Responses obtained from parents using the final ECEL were compared with the recorded health insurance documents. Results: There was an almost perfect agreement between the health insurance and ECEL data sets (Kappa value=0.95 and p < 0.001). Interviewees remembered the important events more accurately (100% exact timing match in case of hospitalization). Conclusions: The Early Childhood Events Life-Grid method proved to be highly accurate when compared with recorded medical documents. PMID:28959773

  14. Evaluation methodologies for an advanced information processing system

    NASA Technical Reports Server (NTRS)

    Schabowsky, R. S., Jr.; Gai, E.; Walker, B. K.; Lala, J. H.; Motyka, P.

    1984-01-01

    The system concept and requirements for an Advanced Information Processing System (AIPS) are briefly described, but the emphasis of this paper is on the evaluation methodologies being developed and utilized in the AIPS program. The evaluation tasks include hardware reliability, maintainability and availability, software reliability, performance, and performability. Hardware RMA and software reliability are addressed with Markov modeling techniques. The performance analysis for AIPS is based on queueing theory. Performability is a measure of merit which combines system reliability and performance measures. The probability laws of the performance measures are obtained from the Markov reliability models. Scalar functions of this law such as the mean and variance provide measures of merit in the AIPS performability evaluations.

  15. [The use of automated processing of information obtained during space flights for the monitoring and evaluation of airborne pollution].

    PubMed

    Bagmanov, B Kh; Mikhaĭlova, A Iu; Pavlov, S V

    1997-01-01

    The article describes experience on use of automated processing of information obtained during spaceflights for analysis of urban air pollution. The authors present a method for processing of information obtained during spaceflights and show how to identify foci of industrial release and area of their spread within and beyond the cities.

  16. Reliability of medical record abstraction by non-physicians for orthopedic research.

    PubMed

    Mi, Michael Y; Collins, Jamie E; Lerner, Vladislav; Losina, Elena; Katz, Jeffrey N

    2013-06-09

    Medical record review (MRR) is one of the most commonly used research methods in clinical studies because it provides rich clinical detail. However, because MRR involves subjective interpretation of information found in the medical record, it is critically important to understand the reproducibility of data obtained from MRR. Furthermore, because medical record review is both technically demanding and time intensive, it is important to establish whether trained research staff with no clinical training can abstract medical records reliably. We assessed the reliability of abstraction of medical record information in a sample of patients who underwent total knee replacement (TKR) at a referral center. An orthopedic surgeon instructed two research coordinators (RCs) in the abstraction of inpatient medical records and operative notes for patients undergoing primary TKR. The two RCs and the surgeon each independently reviewed 75 patients' records and one RC reviewed the records twice. Agreement was assessed using the proportion of items on which reviewers agreed and the kappa statistic. The kappa for agreement between the surgeon and each RC ranged from 0.59 to 1 for one RC and 0.49 to 1 for the other; the percent agreement ranged from 82% to 100% for one RC and 70% to 100% for the other. The repeated abstractions by the same RC showed high intra-rater agreement, with kappas ranging from 0.66 to 1 and percent agreement ranging from 97% to 100%. Inter-rater agreement between the two RCs was moderate with kappa ranging from 0.49 to 1 and percent agreement ranging from 76% to 100%. The MRR method used in this study showed excellent reliability for abstraction of information that had low technical complexity and moderate to good reliability for information that had greater complexity. Overall, these findings support the use of non-surgeons to abstract surgical data from operative notes.

  17. The ventriloquist in periphery: impact of eccentricity-related reliability on audio-visual localization.

    PubMed

    Charbonneau, Geneviève; Véronneau, Marie; Boudrias-Fournier, Colin; Lepore, Franco; Collignon, Olivier

    2013-10-28

    The relative reliability of separate sensory estimates influences the way they are merged into a unified percept. We investigated how eccentricity-related changes in reliability of auditory and visual stimuli influence their integration across the entire frontal space. First, we surprisingly found that despite a strong decrease in auditory and visual unisensory localization abilities in periphery, the redundancy gain resulting from the congruent presentation of audio-visual targets was not affected by stimuli eccentricity. This result therefore contrasts with the common prediction that a reduction in sensory reliability necessarily induces an enhanced integrative gain. Second, we demonstrate that the visual capture of sounds observed with spatially incongruent audio-visual targets (ventriloquist effect) steadily decreases with eccentricity, paralleling a lowering of the relative reliability of unimodal visual over unimodal auditory stimuli in periphery. Moreover, at all eccentricities, the ventriloquist effect positively correlated with a weighted combination of the spatial resolution obtained in unisensory conditions. These findings support and extend the view that the localization of audio-visual stimuli relies on an optimal combination of auditory and visual information according to their respective spatial reliability. All together, these results evidence that the external spatial coordinates of multisensory events relative to an observer's body (e.g., eyes' or head's position) influence how this information is merged, and therefore determine the perceptual outcome.

  18. 24 CFR 960.205 - Drug use by applicants: Obtaining information from drug treatment facility.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    .... This section addresses a PHA's authority to request and obtain information from drug abuse treatment... household member. (2) Drug abuse treatment facility. An entity: (i) That holds itself out as providing, and... consent forms signed by such household member that: (i) Requests any drug abuse treatment facility to...

  19. 24 CFR 960.205 - Drug use by applicants: Obtaining information from drug treatment facility.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... This section addresses a PHA's authority to request and obtain information from drug abuse treatment... household member. (2) Drug abuse treatment facility. An entity: (i) That holds itself out as providing, and... consent forms signed by such household member that: (i) Requests any drug abuse treatment facility to...

  20. 24 CFR 960.205 - Drug use by applicants: Obtaining information from drug treatment facility.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    .... This section addresses a PHA's authority to request and obtain information from drug abuse treatment... household member. (2) Drug abuse treatment facility. An entity: (i) That holds itself out as providing, and... consent forms signed by such household member that: (i) Requests any drug abuse treatment facility to...

  1. 24 CFR 960.205 - Drug use by applicants: Obtaining information from drug treatment facility.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    .... This section addresses a PHA's authority to request and obtain information from drug abuse treatment... household member. (2) Drug abuse treatment facility. An entity: (i) That holds itself out as providing, and... consent forms signed by such household member that: (i) Requests any drug abuse treatment facility to...

  2. 24 CFR 960.205 - Drug use by applicants: Obtaining information from drug treatment facility.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    .... This section addresses a PHA's authority to request and obtain information from drug abuse treatment... household member. (2) Drug abuse treatment facility. An entity: (i) That holds itself out as providing, and... consent forms signed by such household member that: (i) Requests any drug abuse treatment facility to...

  3. Use of social media and internet to obtain health information by rural adolescent mothers.

    PubMed

    Logsdon, M Cynthia; Mittelberg, Meghan; Myers, John

    2015-02-01

    Adolescent mothers residing in rural areas need accurate health information to care for themselves and their babies. The purpose of this study was to determine the use of social media and Internet by adolescent mothers residing in rural areas, particularly in regard to obtaining health information. Using a cross-sectional design, a convenience sample of adolescent mothers living in a rural county in a state located in the southern U.S. (n = 15), completed the Pew Internet Survey during home visits with nurses from a community health agency. All adolescent mothers accessed Internet using cell phones (93%) or computers (100%). Many adolescent mothers sent or received over 50 text messages per day. Thirty-three percent of adolescent mothers searched for health information on the Internet every few weeks; 27% received health information from Facebook. Communication of health information using the Internet and social media may be effective with adolescent mothers residing in rural areas. Copyright © 2014 Elsevier Inc. All rights reserved.

  4. Reliability and validity of a Tutorial Group Effectiveness Instrument.

    PubMed

    Singaram, Veena S; Van Der Vleuten, Cees P M; Van Berkel, Henk; Dolmans, Diana H J M

    2010-01-01

    Tutorial group effectiveness is essential for the success of learning in problem-based learning (PBL). Less effective and dysfunctional groups compromise the quality of students learning in PBL. This article aims to report on the reliability and validity of an instrument aimed at measuring tutorial group effectiveness in PBL. The items within the instrument are clustered around motivational and cognitive factors based on Slavin's theoretical framework. A confirmatory factor analysis (CFA) was carried out to estimate the validity of the instrument. Furthermore, generalizability studies were conducted and alpha coefficients were computed to determine the reliability and homogeneity of each factor. The CFA indicated that a three-factor model comprising 19 items showed a good fit with the data. Alpha coefficients per factor were high. The findings of the generalizability studies indicated that at least 9-10 student responses are needed in order to obtain reliable data at the tutorial group level. The instrument validated in this study has the potential to provide faculty and students with diagnostic information and feedback about student behaviors that enhance and hinder tutorial group effectiveness.

  5. Reviewing Reliability and Validity of Information for University Educational Evaluation

    NASA Astrophysics Data System (ADS)

    Otsuka, Yusaku

    To better utilize evaluations in higher education, it is necessary to share the methods of reviewing reliability and validity of examination scores and grades, and to accumulate and share data for confirming results. Before the GPA system is first introduced into a university or college, the reliability of examination scores and grades, especially for essay examinations, must be assured. Validity is a complicated concept, so should be assured in various ways, including using professional audits, theoretical models, and statistical data analysis. Because individual students and teachers are continually improving, using evaluations to appraise their progress is not always compatible with using evaluations in appraising the implementation of accountability in various departments or the university overall. To better utilize evaluations and improve higher education, evaluations should be integrated into the current system by sharing the vision of an academic learning community and promoting interaction between students and teachers based on sufficiently reliable and validated evaluation tools.

  6. 40 CFR 1515.10 - What information is available, and how can it be obtained?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... can it be obtained? 1515.10 Section 1515.10 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY... Council on Environmental Quality will permit copying of any available material but will reserve the right... the Freedom of Information Act as amended (5 U.S.C. 552(b)). (c) The legislative history of the...

  7. 78 FR 73424 - Retirement of Requirements in Reliability Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-06

    ... predicated on the view that many violations of requirements currently included in Reliability Standards pose... for Bulk-Power System reliability or may be redundant. The Commission is interested in obtaining views... redundant. The Commission is interested in obtaining views on whether such requirements could be removed...

  8. [The analytical reliability of clinical laboratory information and role of the standards in its support].

    PubMed

    Men'shikov, V V

    2012-12-01

    The article deals with the factors impacting the reliability of clinical laboratory information. The differences of qualities of laboratory analysis tools produced by various manufacturers are discussed. These characteristics are the causes of discrepancy of the results of laboratory analyses of the same analite. The role of the reference system in supporting the comparability of laboratory analysis results is demonstrated. The project of national standard is presented to regulate the requirements to standards and calibrators for analysis of qualitative and non-metrical characteristics of components of biomaterials.

  9. Patient-oriented methotrexate information sites on the Internet: a review of completeness, accuracy, format, reliability, credibility, and readability.

    PubMed

    Thompson, Andrew E; Graydon, Sara L

    2009-01-01

    With continuing use of the Internet, rheumatologists are referring patients to various websites to gain information about medications and diseases. Our goal was to develop and evaluate a Medication Website Assessment Tool (MWAT) for use by health professionals, and to explore the overall quality of methotrexate information presented on common English-language websites. Identification of websites was performed using a search strategy on the search engine Google. The first 250 hits were screened. Inclusion criteria included those English-language websites from authoritative sources, trusted medical, physicians', and common health-related websites. Websites from pharmaceutical companies, online pharmacies, and where the purpose seemed to be primarily advertisements were also included. Product monographs or technical-based web pages and web pages where the information was clearly directed at patients with cancer were excluded. Two reviewers independently scored each included web page for completeness and accuracy, format, readability, reliability, and credibility. An overall ranking was provided for each methotrexate information page. Twenty-eight web pages were included in the analysis. The average score for completeness and accuracy was 15.48+/-3.70 (maximum 24) with 10 out of 28 pages scoring 18 (75%) or higher. The average format score was 6.00+/-1.46 (maximum 8). The Flesch-Kincaid Grade Level revealed an average grade level of 10.07+/-1.84, with 5 out of 28 websites written at a reading level less than grade 8; however, no web page scored at a grade 5 to 6 level. An overall ranking was calculated identifying 8 web pages as appropriate sources of accurate and reliable methotrexate information. With the enormous amount of information available on the Internet, it is important to direct patients to web pages that are complete, accurate, readable, and credible sources of information. We identified web pages that may serve the interests of both rheumatologists and

  10. The evaluation of advanced traveler information services (ATIS) impacts on truck travel time reliability : using the simulated yoked study concept

    DOT National Transportation Integrated Search

    2004-03-01

    The ability of Advanced Traveler Information Systems (ATIS) to improve the on-time reliability of urban truck movements is evaluated through the application of the Heuristic On-Line Web- : Linked Arrival Time Estimation (HOWLATE) methodology. In HOWL...

  11. 25 CFR 1000.73 - Once a Tribe/Consortium has been awarded a grant, may the Tribe/Consortium obtain information...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Once a Tribe/Consortium has been awarded a grant, may the Tribe/Consortium obtain information from a non-BIA bureau? 1000.73 Section 1000.73 Indians OFFICE OF THE... § 1000.73 Once a Tribe/Consortium has been awarded a grant, may the Tribe/Consortium obtain information...

  12. Investigating the reliability of substance toxicity information found on the Internet in pediatric poisonings.

    PubMed

    Kearney, Thomas E; Lieu, Diane; Singer, Nathan; Tsutaoka, Ben; Ho, Raymond; Olson, Kent

    2013-12-01

    The Internet may be the first source of information used by parents during a suspected poisoning of their children. Our primary aim was to assess the reliability of the Internet as a resource for information for parents to initially manage a suspected poisoning involving their child without outside consultation. We distributed a self-administered survey to English-speaking parents to evaluate their Internet access behaviors so we could emulate their search strategies for a poisoning. A panel of clinical toxicologists performed an evaluation of Websites to determine the proportion that provided accurate and adequate information on common substances involved in poisonings. Of 21 parents surveyed, 15 (71%) used the Internet daily, with Google and Yahoo being the most commonly used search engines. Seven parents (39%) were somewhat to very likely to utilize the Internet during a poisoning scenario with prescription medications involving their child. Overall, only 27 (38%) of the Websites reviewed advised the user to call the poison center with the proper 800 telephone number, whereas no Website provided adequate information to manage the poisoning without outside consultation. Few Websites provided information on the toxic dose (13%), how to determine whether to manage the poisoning at home or in a hospital (22%), or first aid (28%). The information provided on the Internet for substances involved in poisonings is variable and often incomplete. Reliance on the Internet for poisonings could create needless delays and inappropriate assessments and actions to manage a pediatric poisoning incident.

  13. Problematics of Reliability of Road Rollers

    NASA Astrophysics Data System (ADS)

    Stawowiak, Michał; Kuczaj, Mariusz

    2018-06-01

    This article refers to the reliability of road rollers used in a selected roadworks company. Information on the method of road rollers service and how the service affects the reliability of these rollers is presented. Attention was paid to the process of the implemented maintenance plan with regard to the machine's operational time. The reliability of road rollers was analyzed by determining and interpreting readiness coefficients.

  14. Visual judgements of steadiness in one-legged stance: reliability and validity.

    PubMed

    Haupstein, T; Goldie, P

    2000-01-01

    There is a paucity of information about the validity and reliability of clinicians' visual judgements of steadiness in one-legged stance. Such judgements are used frequently in clinical practice to support decisions about treatment in the fields of neurology, sports medicine, paediatrics and orthopaedics. The aim of the present study was to address the validity and reliability of visual judgements of steadiness in one-legged stance in a group of physiotherapists. A videotape of 20 five-second performances was shown to 14 physiotherapists with median clinical experience of 6.75 years. Validity of visual judgement was established by correlating scores obtained from an 11-point rating scale with criterion scores obtained from a force platform. In addition, partial correlations were used to control for the potential influence of body weight on the relationship between the visual judgements and criterion scores. Inter-observer reliability was quantified between the physiotherapists; intra-observer reliability was quantified between two tests four weeks apart. Mean criterion-related validity was high, regardless of whether body weight was controlled for statistically (Pearson's r = 0.84, 0.83, respectively). The standard error of estimating the criterion score was 3.3 newtons. Inter-observer reliability was high (ICC (2,1) = 0.81 at Test 1 and 0.82 at Test 2). Intra-observer reliability was high (on average ICC (2,1) = 0.88; Pearson's r = 0.90). The standard error of measurement for the 11-point scale was one unit. The finding of higher accuracy of making visual judgements than previously reported may be due to several aspects of design: use of a criterion score derived from the variability of the force signal which is more discriminating than variability of centre of pressure; use of a discriminating visual rating scale; specificity and clear definition of the phenomenon to be rated.

  15. Principle of maximum entropy for reliability analysis in the design of machine components

    NASA Astrophysics Data System (ADS)

    Zhang, Yimin

    2018-03-01

    We studied the reliability of machine components with parameters that follow an arbitrary statistical distribution using the principle of maximum entropy (PME). We used PME to select the statistical distribution that best fits the available information. We also established a probability density function (PDF) and a failure probability model for the parameters of mechanical components using the concept of entropy and the PME. We obtained the first four moments of the state function for reliability analysis and design. Furthermore, we attained an estimate of the PDF with the fewest human bias factors using the PME. This function was used to calculate the reliability of the machine components, including a connecting rod, a vehicle half-shaft, a front axle, a rear axle housing, and a leaf spring, which have parameters that typically follow a non-normal distribution. Simulations were conducted for comparison. This study provides a design methodology for the reliability of mechanical components for practical engineering projects.

  16. The Development of Dynamic Human Reliability Analysis Simulations for Inclusion in Risk Informed Safety Margin Characterization Frameworks

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jeffrey C. Joe; Diego Mandelli; Ronald L. Boring

    2015-07-01

    The United States Department of Energy is sponsoring the Light Water Reactor Sustainability program, which has the overall objective of supporting the near-term and the extended operation of commercial nuclear power plants. One key research and development (R&D) area in this program is the Risk-Informed Safety Margin Characterization pathway, which combines probabilistic risk simulation with thermohydraulic simulation codes to define and manage safety margins. The R&D efforts to date, however, have not included robust simulations of human operators, and how the reliability of human performance or lack thereof (i.e., human errors) can affect risk-margins and plant performance. This paper describesmore » current and planned research efforts to address the absence of robust human reliability simulations and thereby increase the fidelity of simulated accident scenarios.« less

  17. The Healthy Web--Access to Online Health Information for Individuals with Disabilities

    ERIC Educational Resources Information Center

    Geiger, Brian; Evans, R. R.; Cellitti, M. A.; Smith, K. Hogan; O'Neal, Marcia R.; Firsing, S. L., III; Chandan, P.

    2011-01-01

    Background: The Internet can be an invaluable resource for obtaining health information by people with disabilities. Although valid and reliable information is available, previous research revealed barriers to accessing health information online. Health education specialists have the responsibilities to insure that it is accessible to all users.…

  18. Reliability apportionment approach for spacecraft solar array using fuzzy reasoning Petri net and fuzzy comprehensive evaluation

    NASA Astrophysics Data System (ADS)

    Wu, Jianing; Yan, Shaoze; Xie, Liyang; Gao, Peng

    2012-07-01

    The reliability apportionment of spacecraft solar array is of significant importance for spacecraft designers in the early stage of design. However, it is difficult to use the existing methods to resolve reliability apportionment problem because of the data insufficiency and the uncertainty of the relations among the components in the mechanical system. This paper proposes a new method which combines the fuzzy comprehensive evaluation with fuzzy reasoning Petri net (FRPN) to accomplish the reliability apportionment of the solar array. The proposed method extends the previous fuzzy methods and focuses on the characteristics of the subsystems and the intrinsic associations among the components. The analysis results show that the synchronization mechanism may obtain the highest reliability value and the solar panels and hinges may get the lowest reliability before design and manufacturing. Our developed method is of practical significance for the reliability apportionment of solar array where the design information has not been clearly identified, particularly in early stage of design.

  19. ASSESSING AND COMBINING RELIABILITY OF PROTEIN INTERACTION SOURCES

    PubMed Central

    LEACH, SONIA; GABOW, AARON; HUNTER, LAWRENCE; GOLDBERG, DEBRA S.

    2008-01-01

    Integrating diverse sources of interaction information to create protein networks requires strategies sensitive to differences in accuracy and coverage of each source. Previous integration approaches calculate reliabilities of protein interaction information sources based on congruity to a designated ‘gold standard.’ In this paper, we provide a comparison of the two most popular existing approaches and propose a novel alternative for assessing reliabilities which does not require a gold standard. We identify a new method for combining the resultant reliabilities and compare it against an existing method. Further, we propose an extrinsic approach to evaluation of reliability estimates, considering their influence on the downstream tasks of inferring protein function and learning regulatory networks from expression data. Results using this evaluation method show 1) our method for reliability estimation is an attractive alternative to those requiring a gold standard and 2) the new method for combining reliabilities is less sensitive to noise in reliability assignments than the similar existing technique. PMID:17990508

  20. Challenges of Obtaining Informed Consent in Emergency Ward: A Qualitative Study in One Iranian Hospital

    PubMed Central

    Davoudi, Nayyereh; Nayeri, Nahid Dehghan; Zokaei, Mohammad Saeed; Fazeli, Nematallah

    2017-01-01

    Background and Objective: Regarding the fact that emergency ward has unique characteristics, whose uniqueness affects informed consent processes by creating specific challenges. Hence, it seems necessary to identify the process and challenges of informed consent in the emergency ward through a qualitative study to understand actual patients’ and health care providers’ experiences, beliefs, values, and feelings about the informed consent in the emergency ward. Through such studies, new insight can be gained on the process of informed consent and its challenges with the hope that the resulting knowledge will enable the promotion of ethical, legal as well as effective health services to the patients in the emergency ward. Method: In this qualitative study, research field was one of the emergency wards of educational and public hospitals in Iran. Field work and participant observation were carried out for 515 hours from June 2014 to March 2016. Also, conversations and semi-structured interviews based on the observations were conducted. The participants of the study were nurses and physicians working in the emergency ward, as well as patients and their attendants who were involved in the process of obtaining informed consent. Results: Three main categories were extracted from the data: a sense of frustration; reverse protection; and culture of paternalism in consent process. Conclusion: Findings of this study can be utilized in correcting the structures and processes of obtaining informed consent together with promotion of patients' ethical and legal care in emergency ward. In this way, the approaches in consent process will be changed from paternalistic approach to patient-centered care which concomitantly protects patient’s autonomy. PMID:29399235

  1. Testing the reliability of information extracted from ancient zircon

    NASA Astrophysics Data System (ADS)

    Kielman, Ross; Whitehouse, Martin; Nemchin, Alexander

    2015-04-01

    Studies combining zircon U-Pb chronology, trace element distribution as well as O and Hf isotope systematics are a powerful way to gain understanding of the processes shaping Earth's evolution, especially in detrital populations where constraints from the original host are missing. Such studies of the Hadean detrital zircon population abundant in sedimentary rocks in Western Australia have involved analysis of an unusually large number of individual grains, but also highlighted potential problems with the approach, only apparent when multiple analyses are obtained from individual grains. A common feature of the Hadean as well as many early Archaean zircon populations is their apparent inhomogeneity, which reduces confidence in conclusions based on studies combining chemistry and isotopic characteristics of zircon. In order to test the reliability of information extracted from early Earth zircon, we report results from one of the first in-depth multi-method study of zircon from a relatively simple early Archean magmatic rock, used as an analogue to ancient detrital zircon. The approach involves making multiple SIMS analyses in individual grains in order to be comparable to the most advanced studies of detrital zircon populations. The investigated sample is a relatively undeformed, non-migmatitic ca. 3.8 Ga tonalite collected a few kms south of the Isua Greenstone Belt, southwest Greenland. Extracted zircon grains can be combined into three different groups based on the behavior of their U-Pb systems: (i) grains that show internally consistent and concordant ages and define an average age of 3805±15 Ma, taken to be the age of the rock, (ii) grains that are distributed close to the concordia line, but with significant variability between multiple analyses, suggesting an ancient Pb loss and (iii) grains that have multiple analyses distributed along a discordia pointing towards a zero intercept, indicating geologically recent Pb-loss. This overall behavior has

  2. Using stereophotogrammetric technology for obtaining intraoral digital impressions of implants.

    PubMed

    Pradíes, Guillermo; Ferreiroa, Alberto; Özcan, Mutlu; Giménez, Beatriz; Martínez-Rus, Francisco

    2014-04-01

    The procedure for making impressions of multiple implants continues to be a challenge, despite the various techniques proposed to date. The authors' objective in this case report is to describe a novel digital impression method for multiple implants involving the use of stereophotogrammetric technology. The authors present three cases of patients who had multiple implants in which the impressions were obtained with this technology. Initially, a stereo camera with an infrared flash detects the position of special flag abutments screwed into the implants. This process is based on registering the x, y and z coordinates of each implant and the distances between them. This information is converted into a stereolithographic (STL) file. To add the soft-tissue information, the user must obtain another STL file by using an intraoral or extraoral scanner. In the first case presented, this information was acquired from the plaster model with an extraoral scanner; in the second case, from a Digital Imaging and Communication in Medicine (DICOM) file of the plaster model obtained with cone-beam computed tomography; and in the third case, through an intraoral digital impression with a confocal scanner. In the three cases, the frameworks manufactured from this technique showed a correct clinical passive fit. At follow-up appointments held six, 12 and 24 months after insertion of the prosthesis, no complications were reported. Stereophotogrammetric technology is a viable, accurate and easy technique for making multiple implant impressions. Clinicians can use stereophotogrammetric technology to acquire reliable digital master models as a first step in producing frameworks with a correct passive fit.

  3. Biopsy Specimens Obtained 7 Days After Starting Chemoradiotherapy (CRT) Provide Reliable Predictors of Response to CRT for Rectal Cancer

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Suzuki, Toshiyuki; Sadahiro, Sotaro, E-mail: sadahiro@is.icc.u-tokai.ac.jp; Tanaka, Akira

    2013-04-01

    Purpose: Preoperative chemoradiation therapy (CRT) significantly decreases local recurrence in locally advanced rectal cancer. Various biomarkers in biopsy specimens obtained before CRT have been proposed as predictors of response. However, reliable biomarkers remain to be established. Methods and Materials: The study group comprised 101 consecutive patients with locally advanced rectal cancer who received preoperative CRT with oral uracil/tegafur (UFT) or S-1. We evaluated histologic findings on hematoxylin and eosin (H and E) staining and immunohistochemical expressions of Ki67, p53, p21, and apoptosis in biopsy specimens obtained before CRT and 7 days after starting CRT. These findings were contrasted with themore » histologic response and the degree of tumor shrinkage. Results: In biopsy specimens obtained before CRT, histologic marked regression according to the Japanese Classification of Colorectal Carcinoma (JCCC) criteria and the degree of tumor shrinkage on barium enema examination (BE) were significantly greater in patients with p21-positive tumors than in those with p21-negative tumors (P=.04 and P<.01, respectively). In biopsy specimens obtained 7 days after starting CRT, pathologic complete response, histologic marked regression according to both the tumor regression criteria and JCCC criteria, and T downstaging were significantly greater in patients with apoptosis-positive and p21-positive tumors than in those with apoptosis-negative (P<.01, P=.02, P=.01, and P<.01, respectively) or p21-negative tumors (P=.03, P<.01, P<.01, and P=.02, respectively). The degree of tumor shrinkage on both BE as well as MRI was significantly greater in patients with apoptosis-positive and with p21-positive tumors than in those with apoptosis-negative or p21-negative tumors, respectively. Histologic changes in H and E-stained biopsy specimens 7 days after starting CRT significantly correlated with pathologic complete response and marked regression on both JCCC and tumor

  4. Health Information Needs and Reliability of Sources Among Nondegree Health Sciences Students: A Prerequisite for Designing eHealth Literacy.

    PubMed

    Haruna, Hussein; Tshuma, Ndumiso; Hu, Xiao

    Understanding health information needs and health-seeking behavior is a prerequisite for developing an electronic health information literacy (EHIL) or eHealth literacy program for nondegree health sciences students. At present, interest in researching health information needs and reliable sources paradigms has gained momentum in many countries. However, most studies focus on health professionals and students in higher education institutions. The present study was aimed at providing new insight and filling the existing gap by examining health information needs and reliability of sources among nondegree health sciences students in Tanzania. A cross-sectional study was conducted in 15 conveniently selected health training institutions, where 403 health sciences students were participated. Thirty health sciences students were both purposely and conveniently chosen from each health-training institution. The selected students were pursuing nursing and midwifery, clinical medicine, dentistry, environmental health sciences, pharmacy, and medical laboratory sciences courses. Involved students were either in their first year, second year, or third year of study. Health sciences students' health information needs focus on their educational requirements, clinical practice, and personal information. They use print, human, and electronic health information. They lack eHealth research skills in navigating health information resources and have insufficient facilities for accessing eHealth information, a lack of specialists in health information, high costs for subscription electronic information, and unawareness of the availability of free Internet and other online health-related databases. This study found that nondegree health sciences students have limited skills in EHIL. Thus, designing and incorporating EHIL skills programs into the curriculum of nondegree health sciences students is vital. EHIL is a requirement common to all health settings, learning environments, and

  5. Technical information report: Plasma melter operation, reliability, and maintenance analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hendrickson, D.W.

    1995-03-14

    This document provides a technical report of operability, reliability, and maintenance of a plasma melter for low-level waste vitrification, in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. A process description is provided that minimizes maintenance and downtime and includes material and energy balances, equipment sizes and arrangement, startup/operation/maintence/shutdown cycle descriptions, and basis for scale-up to a 200 metric ton/day production facility. Operational requirements are provided including utilities, feeds, labor, and maintenance. Equipment reliability estimates and maintenance requirements are provided which includes a list of failure modes, responses, and consequences.

  6. Effectiveness of different approaches to disseminating traveler information on travel time reliability.

    DOT National Transportation Integrated Search

    2014-01-01

    The second Strategic Highway Research Program (SHRP 2) Reliability program aims to improve trip time reliability by reducing the frequency and effects of events that cause travel times to fluctuate unpredictably. Congestion caused by unreliable, or n...

  7. Emulation applied to reliability analysis of reconfigurable, highly reliable, fault-tolerant computing systems

    NASA Technical Reports Server (NTRS)

    Migneault, G. E.

    1979-01-01

    Emulation techniques applied to the analysis of the reliability of highly reliable computer systems for future commercial aircraft are described. The lack of credible precision in reliability estimates obtained by analytical modeling techniques is first established. The difficulty is shown to be an unavoidable consequence of: (1) a high reliability requirement so demanding as to make system evaluation by use testing infeasible; (2) a complex system design technique, fault tolerance; (3) system reliability dominated by errors due to flaws in the system definition; and (4) elaborate analytical modeling techniques whose precision outputs are quite sensitive to errors of approximation in their input data. Next, the technique of emulation is described, indicating how its input is a simple description of the logical structure of a system and its output is the consequent behavior. Use of emulation techniques is discussed for pseudo-testing systems to evaluate bounds on the parameter values needed for the analytical techniques. Finally an illustrative example is presented to demonstrate from actual use the promise of the proposed application of emulation.

  8. Test-retest reliability of the assessment of postural stability in typically developing children and in hearing impaired children.

    PubMed

    De Kegel, A; Dhooge, I; Cambier, D; Baetens, T; Palmans, T; Van Waelvelde, H

    2011-04-01

    The purpose of this study was to establish test-retest reliability of centre of pressure (COP) measurements obtained by an AccuGait portable forceplate (ACG), mean COG sway velocity measured by a Basic Balance Master (BBM) and clinical balance tests in children with and without balance difficulties. 49 typically developing children and 23 hearing impaired children, with a higher risk for stability problems, between 6 and 12 years of age participated. Each child performed the modified Clinical Test of Sensory Interaction on Balance (mCTSIB), Unilateral Stance (US) and Tandem Stance on ACG, mCTSIB and US on BBM and clinical balance tests: one-leg standing, balance beam walking and one-leg hopping. All subjects completed 2 test sessions on 2 different days in the same week assessed by the same examiner. Among COP measurements obtained by the ACG, mean sway velocity was the most reliable parameter with all ICCs higher than 0.72. The standard deviation (SD) of sway velocity, sway area, SD of anterior-posterior and SD of medio-lateral COP data showed moderate to excellent reliability with ICCs between 0.55 and 0.96 but some caution must be taken into account in some conditions. BBM is less reliable but clinical balance tests are as reliable as ACG. Hearing impaired children exhibited better relative reliability (ICC) and comparable absolute reliability (SEM) for most balance parameters compared to typically developing children. Reliable information regarding postural stability of typically developing children and hearing impaired children may be obtained utilizing COP measurements generated by an AccuGait system and clinical balance tests. Copyright © 2011 Elsevier B.V. All rights reserved.

  9. An exploration of strategies used by older people to obtain information about health- and social care services in the community.

    PubMed

    Mc Grath, Margaret; Clancy, Kathleen; Kenny, Anne

    2016-10-01

    To explore the strategies used by older people living in Ireland to obtain information about community health and social services. A qualitative exploratory design was used. Focus groups (n = 3) were conducted with community dwelling older people (n = 17). A series of vignettes were used to guide discussion regarding hypothetical situations that approximated real-life scenarios for older people. Data were transcribed verbatim and analysed using content analysis. Obtaining information about community health and social services is an ongoing process that requires continuous commitment by older adults. Key strategies which emerged from the data included (i) taking a proactive stance towards accessing health information, (ii) making use of personal networks in your community and (iii) developing 'insider' knowledge. Older people in this study had a proactive approach to obtaining health information and identified the importance of taking responsibility for managing their own needs. Despite this, obtaining basic information about community health and social services was a challenging and time-consuming process. Future research should focus on developing health literacy interventions that build upon and expand the strategies currently used by older people. © 2015 The Authors. Health Expectations published by John Wiley & Sons Ltd.

  10. Relating design and environmental variables to reliability

    NASA Astrophysics Data System (ADS)

    Kolarik, William J.; Landers, Thomas L.

    The combination of space application and nuclear power source demands high reliability hardware. The possibilities of failure, either an inability to provide power or a catastrophic accident, must be minimized. Nuclear power experiences on the ground have led to highly sophisticated probabilistic risk assessment procedures, most of which require quantitative information to adequately assess such risks. In the area of hardware risk analysis, reliability information plays a key role. One of the lessons learned from the Three Mile Island experience is that thorough analyses of critical components are essential. Nuclear grade equipment shows some reliability advantages over commercial. However, no statistically significant difference has been found. A recent study pertaining to spacecraft electronics reliability, examined some 2500 malfunctions on more than 300 aircraft. The study classified the equipment failures into seven general categories. Design deficiencies and lack of environmental protection accounted for about half of all failures. Within each class, limited reliability modeling was performed using a Weibull failure model.

  11. The Survey of Fires in Buildings. Third Report: The Use of Information Obtained From Fire Surveys

    NASA Technical Reports Server (NTRS)

    Silcock, A.

    1973-01-01

    The previous two reports in this series gave details of the general. scope of the pilot exercise and methods by which it was carried out. In addition the nature of the information obtained was illustrated by preliminary analyses of the house and industrial fires surveyed. Some brief comments on the use of the information were made. This report indicates a method of assessing the nation wide effects of applying conclusions drawn from the results of limited numbers of surveys and considers the use of the information for specific purposes.

  12. Reliability of Maximal Strength Testing in Novice Weightlifters

    NASA Technical Reports Server (NTRS)

    Loehr, James A.; Lee, Stuart M. C.; Feiveson, Alan H.; Ploutz-Snyder, Lori L.

    2009-01-01

    The one repetition maximum (1RM) is a criterion measure of muscle strength. However, the reliability of 1RM testing in novice subjects has received little attention. Understanding this information is crucial to accurately interpret changes in muscle strength. To evaluate the test-retest reliability of a squat (SQ), heel raise (HR), and deadlift (DL) 1RM in novice subjects. Twenty healthy males (31 plus or minus 5 y, 179.1 plus or minus 6.1 cm, 81.4 plus or minus 10.6 kg) with no weight training experience in the previous six months participated in four 1RM testing sessions, with each session separated by 5-7 days. SQ and HR 1RM were conducted using a smith machine; DL 1RM was assessed using free weights. Session 1 was considered a familiarization and was not included in the statistical analyses. Repeated measures analysis of variance with Tukey fs post-hoc tests were used to detect between-session differences in 1RM (p.0.05). Test-retest reliability was evaluated by intraclass correlation coefficients (ICC). During Session 2, the SQ and DL 1RM (SQ: 90.2 }4.3, DL: 75.9 }3.3 kg) were less than Session 3 (SQ: 95.3 }4.1, DL: 81.5 plus or minus 3.5 kg) and Session 4 (SQ: 96.6 }4.0, DL: 82.4 }3.9 kg), but there were no differences between Session 3 and Session 4. HR 1RM measured during Session 2 (150.1 }3.7 kg) and Session 3 (152.5 }3.9 kg) were not different from one another, but both were less than Session 4 (157.5 }3.8 kg). The reliability (ICC) of 1RM measures for Sessions 2-4 were 0.88, 0.83, and 0.87, for SQ, HR, and DL, respectively. When considering only Sessions 3 and 4, the reliability was 0.93, 0.91, and 0.86 for SQ, HR, and DL, respectively. One familiarization session and 2 test sessions (for SQ and DL) were required to obtain excellent reliability (ICC greater than or equal to 0.90) in 1RM values with novice subjects. We were unable to attain this level of reliability following 3 HR testing sessions therefore additional sessions may be required to obtain an

  13. Field reliability of competency and sanity opinions: A systematic review and meta-analysis.

    PubMed

    Guarnera, Lucy A; Murrie, Daniel C

    2017-06-01

    We know surprisingly little about the interrater reliability of forensic psychological opinions, even though courts and other authorities have long called for known error rates for scientific procedures admitted as courtroom testimony. This is particularly true for opinions produced during routine practice in the field, even for some of the most common types of forensic evaluations-evaluations of adjudicative competency and legal sanity. To address this gap, we used meta-analytic procedures and study space methodology to systematically review studies that examined the interrater reliability-particularly the field reliability-of competency and sanity opinions. Of 59 identified studies, 9 addressed the field reliability of competency opinions and 8 addressed the field reliability of sanity opinions. These studies presented a wide range of reliability estimates; pairwise percentage agreements ranged from 57% to 100% and kappas ranged from .28 to 1.0. Meta-analytic combinations of reliability estimates obtained by independent evaluators returned estimates of κ = .49 (95% CI: .40-.58) for competency opinions and κ = .41 (95% CI: .29-.53) for sanity opinions. This wide range of reliability estimates underscores the extent to which different evaluation contexts tend to produce different reliability rates. Unfortunately, our study space analysis illustrates that available field reliability studies typically provide little information about contextual variables crucial to understanding their findings. Given these concerns, we offer suggestions for improving research on the field reliability of competency and sanity opinions, as well as suggestions for improving reliability rates themselves. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  14. Calculating system reliability with SRFYDO

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Morzinski, Jerome; Anderson - Cook, Christine M; Klamann, Richard M

    2010-01-01

    SRFYDO is a process for estimating reliability of complex systems. Using information from all applicable sources, including full-system (flight) data, component test data, and expert (engineering) judgment, SRFYDO produces reliability estimates and predictions. It is appropriate for series systems with possibly several versions of the system which share some common components. It models reliability as a function of age and up to 2 other lifecycle (usage) covariates. Initial output from its Exploratory Data Analysis mode consists of plots and numerical summaries so that the user can check data entry and model assumptions, and help determine a final form for themore » system model. The System Reliability mode runs a complete reliability calculation using Bayesian methodology. This mode produces results that estimate reliability at the component, sub-system, and system level. The results include estimates of uncertainty, and can predict reliability at some not-too-distant time in the future. This paper presents an overview of the underlying statistical model for the analysis, discusses model assumptions, and demonstrates usage of SRFYDO.« less

  15. A Direct Method for Obtaining Approximate Standard Error and Confidence Interval of Maximal Reliability for Composites with Congeneric Measures

    ERIC Educational Resources Information Center

    Raykov, Tenko; Penev, Spiridon

    2006-01-01

    Unlike a substantial part of reliability literature in the past, this article is concerned with weighted combinations of a given set of congeneric measures with uncorrelated errors. The relationship between maximal coefficient alpha and maximal reliability for such composites is initially dealt with, and it is shown that the former is a lower…

  16. NASA reliability preferred practices for design and test

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Given here is a manual that was produced to communicate within the aerospace community design practices that have contributed to NASA mission success. The information represents the best technical advice that NASA has to offer on reliability design and test practices. Topics covered include reliability practices, including design criteria, test procedures, and analytical techniques that have been applied to previous space flight programs; and reliability guidelines, including techniques currently applied to space flight projects, where sufficient information exists to certify that the technique will contribute to mission success.

  17. [Knowledge of university students in Szeged, Hungary about reliable contraceptive methods and sexually transmitted diseases].

    PubMed

    Devosa, Iván; Kozinszky, Zoltán; Vanya, Melinda; Szili, Károly; Fáyné Dombi, Alice; Barabás, Katalin

    2016-04-03

    Promiscuity and lack of use of reliable contraceptive methods increase the probability of sexually transmitted diseases and the risk of unwanted pregnancies, which are quite common among university students. The aim of the study was to assess the knowledge of university students about reliable contraceptive methods and sexually transmitted diseases, and to assess the effectiveness of the sexual health education in secondary schools, with specific focus on the education held by peers. An anonymous, self-administered questionnaire survey was carried out in a randomized sample of students at the University of Szeged (n = 472, 298 women and 174 men, average age 21 years) between 2009 and 2011. 62.1% of the respondents declared that reproductive health education lessons in high schools held by peers were reliable and authentic source of information, 12.3% considered as a less reliable source, and 25.6% defined the school health education as irrelevant source. Among those, who considered the health education held by peers as a reliable source, there were significantly more females (69.3% vs. 46.6%, p = 0.001), significantly fewer lived in cities (83.6% vs. 94.8%, p = 0.025), and significantly more responders knew that Candida infection can be transmitted through sexual intercourse (79.5% versus 63.9%, p = 0.02) as compared to those who did not consider health education held by peers as a reliable source. The majority of respondents obtained knowledge about sexual issues from the mass media. Young people who considered health educating programs reliable were significantly better informed about Candida disease.

  18. Analysis shear wave velocity structure obtained from surface wave methods in Bornova, Izmir

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pamuk, Eren, E-mail: eren.pamuk@deu.edu.tr; Akgün, Mustafa, E-mail: mustafa.akgun@deu.edu.tr; Özdağ, Özkan Cevdet, E-mail: cevdet.ozdag@deu.edu.tr

    2016-04-18

    Properties of the soil from the bedrock is necessary to describe accurately and reliably for the reduction of earthquake damage. Because seismic waves change their amplitude and frequency content owing to acoustic impedance difference between soil and bedrock. Firstly, shear wave velocity and depth information of layers on bedrock is needed to detect this changing. Shear wave velocity can be obtained using inversion of Rayleigh wave dispersion curves obtained from surface wave methods (MASW- the Multichannel Analysis of Surface Waves, ReMi-Refraction Microtremor, SPAC-Spatial Autocorrelation). While research depth is limeted in active source study, a passive source methods are utilized formore » deep depth which is not reached using active source methods. ReMi method is used to determine layer thickness and velocity up to 100 m using seismic refraction measurement systems.The research carried out up to desired depth depending on radius using SPAC which is utilized easily in conditions that district using of seismic studies in the city. Vs profiles which are required to calculate deformations in under static and dynamic loads can be obtained with high resolution using combining rayleigh wave dispersion curve obtained from active and passive source methods. In the this study, Surface waves data were collected using the measurements of MASW, ReMi and SPAC at the İzmir Bornova region. Dispersion curves obtained from surface wave methods were combined in wide frequency band and Vs-depth profiles were obtained using inversion. Reliability of the resulting soil profiles were provided by comparison with theoretical transfer function obtained from soil paremeters and observed soil transfer function from Nakamura technique and by examination of fitting between these functions. Vs values are changed between 200-830 m/s and engineering bedrock (Vs>760 m/s) depth is approximately 150 m.« less

  19. A Study of the Accuracy and Reliability of Articles about Alopecia in Newspapers.

    PubMed

    Kim, Hyojin; Park, In Ho; Kim, Do Hyeong; Park, So Hee; Cho, Gyeong Je; Seol, Jung Eun

    2018-06-01

    There is growing interest in alopecia among the general population. Many people obtain information from easily accessible media rather than from doctors; thus, the media can play an important role in shaping public opinion. The goal of this study was to evaluate the content and reliability of newspaper articles on alopecia. Newspapers were categorized into three groups: one group of print newspapers and two groups of online newspapers. Online newspapers were further divided into two groups according to type of publishing company; one publishes both print and online newspapers and the other publishes online newspapers only. The most frequently subscribed or circulated newspaper in each group was selected. Articles containing information on alopecia were selected from 3 years of each newspaper and evaluated for reliability. Most articles in each group used the general term "alopecia" instead of naming a specific hair loss disease. The majority of articles were based on consultation with experts. Assessment of the accuracy of articles with three grade scales showed that the percentage with high accuracy was 38.9%, 47.2%, and 23.3%. Assessment of reliability scores for five selected articles in each group showed that there were statistically significant differences between common readers and dermatologists ( p <0.05). The results of this study suggest that closer monitoring of the media is required to supply easily accessible, balanced, and trustworthy information regarding alopecia.

  20. Reliability of provocative tests of motion sickness susceptibility

    NASA Technical Reports Server (NTRS)

    Calkins, D. S.; Reschke, M. F.; Kennedy, R. S.; Dunlop, W. P.

    1987-01-01

    Test-retest reliability values were derived from motion sickness susceptibility scores obtained from two successive exposures to each of three tests: (1) Coriolis sickness sensitivity test; (2) staircase velocity movement test; and (3) parabolic flight static chair test. The reliability of the three tests ranged from 0.70 to 0.88. Normalizing values from predictors with skewed distributions improved the reliability.

  1. The Effect of Incorrect Reliability Information on Expectations, Perceptions, and Use of Automation.

    PubMed

    Barg-Walkow, Laura H; Rogers, Wendy A

    2016-03-01

    We examined how providing artificially high or low statements about automation reliability affected expectations, perceptions, and use of automation over time. One common method of introducing automation is providing explicit statements about the automation's capabilities. Research is needed to understand how expectations from such introductions affect perceptions and use of automation. Explicit-statement introductions were manipulated to set higher-than (90%), same-as (75%), or lower-than (60%) levels of expectations in a dual-task scenario with 75% reliable automation. Two experiments were conducted to assess expectations, perceptions, compliance, reliance, and task performance over (a) 2 days and (b) 4 days. The baseline assessments showed initial expectations of automation reliability matched introduced levels of expectation. For the duration of each experiment, the lower-than groups' perceptions were lower than the actual automation reliability. However, the higher-than groups' perceptions were no different from actual automation reliability after Day 1 in either study. There were few differences between groups for automation use, which generally stayed the same or increased with experience using the system. Introductory statements describing artificially low automation reliability have a long-lasting impact on perceptions about automation performance. Statements including incorrect automation reliability do not appear to affect use of automation. Introductions should be designed according to desired outcomes for expectations, perceptions, and use of the automation. Low expectations have long-lasting effects. © 2015, Human Factors and Ergonomics Society.

  2. Evaluation Applied to Reliability Analysis of Reconfigurable, Highly Reliable, Fault-Tolerant, Computing Systems for Avionics

    NASA Technical Reports Server (NTRS)

    Migneault, G. E.

    1979-01-01

    Emulation techniques are proposed as a solution to a difficulty arising in the analysis of the reliability of highly reliable computer systems for future commercial aircraft. The difficulty, viz., the lack of credible precision in reliability estimates obtained by analytical modeling techniques are established. The difficulty is shown to be an unavoidable consequence of: (1) a high reliability requirement so demanding as to make system evaluation by use testing infeasible, (2) a complex system design technique, fault tolerance, (3) system reliability dominated by errors due to flaws in the system definition, and (4) elaborate analytical modeling techniques whose precision outputs are quite sensitive to errors of approximation in their input data. The technique of emulation is described, indicating how its input is a simple description of the logical structure of a system and its output is the consequent behavior. The use of emulation techniques is discussed for pseudo-testing systems to evaluate bounds on the parameter values needed for the analytical techniques.

  3. A highly reliable, autonomous data communication subsystem for an advanced information processing system

    NASA Technical Reports Server (NTRS)

    Nagle, Gail; Masotto, Thomas; Alger, Linda

    1990-01-01

    The need to meet the stringent performance and reliability requirements of advanced avionics systems has frequently led to implementations which are tailored to a specific application and are therefore difficult to modify or extend. Furthermore, many integrated flight critical systems are input/output intensive. By using a design methodology which customizes the input/output mechanism for each new application, the cost of implementing new systems becomes prohibitively expensive. One solution to this dilemma is to design computer systems and input/output subsystems which are general purpose, but which can be easily configured to support the needs of a specific application. The Advanced Information Processing System (AIPS), currently under development has these characteristics. The design and implementation of the prototype I/O communication system for AIPS is described. AIPS addresses reliability issues related to data communications by the use of reconfigurable I/O networks. When a fault or damage event occurs, communication is restored to functioning parts of the network and the failed or damage components are isolated. Performance issues are addressed by using a parallelized computer architecture which decouples Input/Output (I/O) redundancy management and I/O processing from the computational stream of an application. The autonomous nature of the system derives from the highly automated and independent manner in which I/O transactions are conducted for the application as well as from the fact that the hardware redundancy management is entirely transparent to the application.

  4. The Reliability of Difference Scores in Populations and Samples

    ERIC Educational Resources Information Center

    Zimmerman, Donald W.

    2009-01-01

    This study was an investigation of the relation between the reliability of difference scores, considered as a parameter characterizing a population of examinees, and the reliability estimates obtained from random samples from the population. The parameters in familiar equations for the reliability of difference scores were redefined in such a way…

  5. 7 CFR 1.641 - How may parties obtain discovery of information needed for the case?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false How may parties obtain discovery of information needed for the case? 1.641 Section 1.641 Agriculture Office of the Secretary of Agriculture ADMINISTRATIVE... legal theories of an attorney. (g) Experts. Unless restricted by the ALJ, a party may discover any facts...

  6. Statistical modeling of software reliability

    NASA Technical Reports Server (NTRS)

    Miller, Douglas R.

    1992-01-01

    This working paper discusses the statistical simulation part of a controlled software development experiment being conducted under the direction of the System Validation Methods Branch, Information Systems Division, NASA Langley Research Center. The experiment uses guidance and control software (GCS) aboard a fictitious planetary landing spacecraft: real-time control software operating on a transient mission. Software execution is simulated to study the statistical aspects of reliability and other failure characteristics of the software during development, testing, and random usage. Quantification of software reliability is a major goal. Various reliability concepts are discussed. Experiments are described for performing simulations and collecting appropriate simulated software performance and failure data. This data is then used to make statistical inferences about the quality of the software development and verification processes as well as inferences about the reliability of software versions and reliability growth under random testing and debugging.

  7. Reliability and agreement in student ratings of the class environment.

    PubMed

    Nelson, Peter M; Christ, Theodore J

    2016-09-01

    The current study estimated the reliability and agreement of student ratings of the classroom environment obtained using the Responsive Environmental Assessment for Classroom Teaching (REACT; Christ, Nelson, & Demers, 2012; Nelson, Demers, & Christ, 2014). Coefficient alpha, class-level reliability, and class agreement indices were evaluated as each index provides important information for different interpretations and uses of student rating scale data. Data for 84 classes across 29 teachers in a suburban middle school were sampled to derive reliability and agreement indices for the REACT subscales across 4 class sizes: 25, 20, 15, and 10. All participating teachers were White and a larger number of 6th-grade classes were included (42%) relative to 7th- (33%) or 8th- (23%) grade classes. Teachers were responsible for a variety of content areas, including language arts (26%), science (26%), math (20%), social studies (19%), communications (6%), and Spanish (3%). Coefficient alpha estimates were generally high across all subscales and class sizes (α = .70-.95); class-mean estimates were greatly impacted by the number of students sampled from each class, with class-level reliability values generally falling below .70 when class size was reduced from 25 to 20. Further, within-class student agreement varied widely across the REACT subscales (mean agreement = .41-.80). Although coefficient alpha and test-retest reliability are commonly reported in research with student rating scales, class-level reliability and agreement are not. The observed differences across coefficient alpha, class-level reliability, and agreement indices provide evidence for evaluating students' ratings of the class environment according to their intended use (e.g., differentiating between classes, class-level instructional decisions). (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  8. 76 FR 64010 - Special Rules Governing Certain Information Obtained Under the Clean Air Act: Technical Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-17

    ... natural gas. 211112 Natural gas liquid extraction facilities. Petrochemical Production 32511 Ethylene.... Suppliers of Natural Gas and NGLs 221210 Natural gas distribution facilities. 211112 Natural gas liquid... Gas Reporting Rule, which are provided in the Special Rules Governing Certain Information Obtained...

  9. Applicability and Limitations of Reliability Allocation Methods

    NASA Technical Reports Server (NTRS)

    Cruz, Jose A.

    2016-01-01

    Reliability allocation process may be described as the process of assigning reliability requirements to individual components within a system to attain the specified system reliability. For large systems, the allocation process is often performed at different stages of system design. The allocation process often begins at the conceptual stage. As the system design develops, more information about components and the operating environment becomes available, different allocation methods can be considered. Reliability allocation methods are usually divided into two categories: weighting factors and optimal reliability allocation. When properly applied, these methods can produce reasonable approximations. Reliability allocation techniques have limitations and implied assumptions that need to be understood by system engineers. Applying reliability allocation techniques without understanding their limitations and assumptions can produce unrealistic results. This report addresses weighting factors, optimal reliability allocation techniques, and identifies the applicability and limitations of each reliability allocation technique.

  10. 28 CFR 115.341 - Obtaining information from residents.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ACT NATIONAL STANDARDS Standards for Juvenile Facilities Screening for Risk of Sexual Victimization... use information about each resident's personal history and behavior to reduce the risk of sexual abuse... instrument. (c) At a minimum, the agency shall attempt to ascertain information about: (1) Prior sexual...

  11. 28 CFR 115.341 - Obtaining information from residents.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ACT NATIONAL STANDARDS Standards for Juvenile Facilities Screening for Risk of Sexual Victimization... use information about each resident's personal history and behavior to reduce the risk of sexual abuse... instrument. (c) At a minimum, the agency shall attempt to ascertain information about: (1) Prior sexual...

  12. 28 CFR 115.341 - Obtaining information from residents.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ACT NATIONAL STANDARDS Standards for Juvenile Facilities Screening for Risk of Sexual Victimization... use information about each resident's personal history and behavior to reduce the risk of sexual abuse... instrument. (c) At a minimum, the agency shall attempt to ascertain information about: (1) Prior sexual...

  13. 50 CFR 221.41 - How may parties obtain discovery of information needed for the case?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... materials, it must show: (i) That it has substantial need of the materials in preparing its own case; and... legal theories of an attorney. (g) Experts. Unless restricted by the ALJ, a party may discover any facts...: (i) That it has a compelling need for the information; and (ii) That it cannot practicably obtain the...

  14. The Americleft Speech Project: A Training and Reliability Study.

    PubMed

    Chapman, Kathy L; Baylis, Adriane; Trost-Cardamone, Judith; Cordero, Kelly Nett; Dixon, Angela; Dobbelsteyn, Cindy; Thurmes, Anna; Wilson, Kristina; Harding-Bell, Anne; Sweeney, Triona; Stoddard, Gregory; Sell, Debbie

    2016-01-01

    To describe the results of two reliability studies and to assess the effect of training on interrater reliability scores. The first study (1) examined interrater and intrarater reliability scores (weighted and unweighted kappas) and (2) compared interrater reliability scores before and after training on the use of the Cleft Audit Protocol for Speech-Augmented (CAPS-A) with British English-speaking children. The second study examined interrater and intrarater reliability on a modified version of the CAPS-A (CAPS-A Americleft Modification) with American and Canadian English-speaking children. Finally, comparisons were made between the interrater and intrarater reliability scores obtained for Study 1 and Study 2. The participants were speech-language pathologists from the Americleft Speech Project. In Study 1, interrater reliability scores improved for 6 of the 13 parameters following training on the CAPS-A protocol. Comparison of the reliability results for the two studies indicated lower scores for Study 2 compared with Study 1. However, this appeared to be an artifact of the kappa statistic that occurred due to insufficient variability in the reliability samples for Study 2. When percent agreement scores were also calculated, the ratings appeared similar across Study 1 and Study 2. The findings of this study suggested that improvements in interrater reliability could be obtained following a program of systematic training. However, improvements were not uniform across all parameters. Acceptable levels of reliability were achieved for those parameters most important for evaluation of velopharyngeal function.

  15. Reliability of reference distances used in photogrammetry.

    PubMed

    Aksu, Muge; Kaya, Demet; Kocadereli, Ilken

    2010-07-01

    To determine the reliability of the reference distances used for photogrammetric assessment. The sample consisted of 100 subjects with mean ages of 22.97 +/- 2.98 years. Five lateral and four frontal parameters were measured directly on the subjects' faces. For photogrammetric assessment, two reference distances for the profile view and three reference distances for the frontal view were established. Standardized photographs were taken and all the parameters that had been measured directly on the face were measured on the photographs. The reliability of the reference distances was checked by comparing direct and indirect values of the parameters obtained from the subjects' faces and photographs. Repeated measure analysis of variance (ANOVA) and Bland-Altman analyses were used for statistical assessment. For profile measurements, the indirect values measured were statistically different from the direct values except for Sn-Sto in male subjects and Prn-Sn and Sn-Sto in female subjects. The indirect values of Prn-Sn and Sn-Sto were reliable in both sexes. The poorest results were obtained in the indirect values of the N-Sn parameter for female subjects and the Sn-Me parameter for male subjects according to the Sa-Sba reference distance. For frontal measurements, the indirect values were statistically different from the direct values in both sexes except for one in male subjects. The indirect values measured were not statistically different from the direct values for Go-Go. The indirect values of Ch-Ch were reliable in male subjects. The poorest results were obtained according to the P-P reference distance. For profile assessment, the T-Ex reference distance was reliable for Prn-Sn and Sn-Sto in both sexes. For frontal assessment, Ex-Ex and En-En reference distances were reliable for Ch-Ch in male subjects.

  16. Furthering the reliable and valid measurement of mental health screening, diagnoses, treatment and outcomes through health information technology.

    PubMed

    Haberer, Jessica E; Trabin, Tom; Klinkman, Michael

    2013-01-01

    Measurement of mental health is challenging; however, many solutions may be found through the use of health information technology. This article reviews current approaches to measuring mental health, focusing on screening, diagnosis, treatment, and outcomes. It then identifies several key areas in which health information technology may advance the field and provide reliable and valid measurements that are readily available to and manageable for providers, as well as acceptable, feasible, and sustainable for selected populations. Although new technologies must overcome many challenges, including privacy, efficiency, cost, and scalability, it is an exciting and fast-growing field with many potential applications and clinical benefit. Copyright © 2013 Elsevier Inc. All rights reserved.

  17. Bayesian Inference for NASA Probabilistic Risk and Reliability Analysis

    NASA Technical Reports Server (NTRS)

    Dezfuli, Homayoon; Kelly, Dana; Smith, Curtis; Vedros, Kurt; Galyean, William

    2009-01-01

    This document, Bayesian Inference for NASA Probabilistic Risk and Reliability Analysis, is intended to provide guidelines for the collection and evaluation of risk and reliability-related data. It is aimed at scientists and engineers familiar with risk and reliability methods and provides a hands-on approach to the investigation and application of a variety of risk and reliability data assessment methods, tools, and techniques. This document provides both: A broad perspective on data analysis collection and evaluation issues. A narrow focus on the methods to implement a comprehensive information repository. The topics addressed herein cover the fundamentals of how data and information are to be used in risk and reliability analysis models and their potential role in decision making. Understanding these topics is essential to attaining a risk informed decision making environment that is being sought by NASA requirements and procedures such as 8000.4 (Agency Risk Management Procedural Requirements), NPR 8705.05 (Probabilistic Risk Assessment Procedures for NASA Programs and Projects), and the System Safety requirements of NPR 8715.3 (NASA General Safety Program Requirements).

  18. 20 CFR 603.23 - What information must State UC agencies obtain from other agencies, and crossmatch with wage...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What information must State UC agencies obtain from other agencies, and crossmatch with wage information, for purposes of an IEVS? 603.23 Section 603.23 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR FEDERAL-STATE UNEMPLOYMENT COMPENSATION (UC) PROGRAM;...

  19. Obtaining subjects' consent to publish identifying personal information: current practices and identifying potential issues.

    PubMed

    Yoshida, Akiko; Dowa, Yuri; Murakami, Hiromi; Kosugi, Shinji

    2013-11-25

    In studies publishing identifying personal information, obtaining consent is regarded as necessary, as it is impossible to ensure complete anonymity. However, current journal practices around specific points to consider when obtaining consent, the contents of consent forms and how consent forms are managed have not yet been fully examined. This study was conducted to identify potential issues surrounding consent to publish identifying personal information. Content analysis was carried out on instructions for authors and consent forms developed by academic journals in four fields (as classified by Journal Citation Reports): medicine general and internal, genetics and heredity, pediatrics, and psychiatry. An online questionnaire survey of editors working for journals that require the submission of consent forms was also conducted. Instructions for authors were reviewed for 491 academic journals (132 for medicine general and internal, 147 for genetics and heredity, 100 for pediatrics, and 112 for psychiatry). Approximately 40% (203: 74 for medicine general and internal, 31 for genetics and heredity, 58 for pediatrics, and 40 for psychiatry) stated that subject consent was necessary. The submission of consent forms was required by 30% (154) of the journals studied, and 10% (50) provided their own consent forms for authors to use. Two journals mentioned that the possible effects of publication on subjects should be considered. Many journal consent forms mentioned the difficulties in ensuring complete anonymity of subjects, but few addressed the study objective, the subjects' right to refuse consent and the withdrawal of consent. The main reason for requiring the submission of consent forms was to confirm that consent had been obtained. Approximately 40% of journals required subject consent to be obtained. However, differences were observed depending on the fields. Specific considerations were not always documented. There is a need to address issues around the study

  20. Obtaining subjects’ consent to publish identifying personal information: current practices and identifying potential issues

    PubMed Central

    2013-01-01

    Background In studies publishing identifying personal information, obtaining consent is regarded as necessary, as it is impossible to ensure complete anonymity. However, current journal practices around specific points to consider when obtaining consent, the contents of consent forms and how consent forms are managed have not yet been fully examined. This study was conducted to identify potential issues surrounding consent to publish identifying personal information. Methods Content analysis was carried out on instructions for authors and consent forms developed by academic journals in four fields (as classified by Journal Citation Reports): medicine general and internal, genetics and heredity, pediatrics, and psychiatry. An online questionnaire survey of editors working for journals that require the submission of consent forms was also conducted. Results Instructions for authors were reviewed for 491 academic journals (132 for medicine general and internal, 147 for genetics and heredity, 100 for pediatrics, and 112 for psychiatry). Approximately 40% (203: 74 for medicine general and internal, 31 for genetics and heredity, 58 for pediatrics, and 40 for psychiatry) stated that subject consent was necessary. The submission of consent forms was required by 30% (154) of the journals studied, and 10% (50) provided their own consent forms for authors to use. Two journals mentioned that the possible effects of publication on subjects should be considered. Many journal consent forms mentioned the difficulties in ensuring complete anonymity of subjects, but few addressed the study objective, the subjects’ right to refuse consent and the withdrawal of consent. The main reason for requiring the submission of consent forms was to confirm that consent had been obtained. Conclusion Approximately 40% of journals required subject consent to be obtained. However, differences were observed depending on the fields. Specific considerations were not always documented. There is a need

  1. Reliability based fatigue design and maintenance procedures

    NASA Technical Reports Server (NTRS)

    Hanagud, S.

    1977-01-01

    A stochastic model has been developed to describe a probability for fatigue process by assuming a varying hazard rate. This stochastic model can be used to obtain the desired probability of a crack of certain length at a given location after a certain number of cycles or time. Quantitative estimation of the developed model was also discussed. Application of the model to develop a procedure for reliability-based cost-effective fail-safe structural design is presented. This design procedure includes the reliability improvement due to inspection and repair. Methods of obtaining optimum inspection and maintenance schemes are treated.

  2. 45 CFR 73.735-803 - Prohibition against involvement in financial transactions based on information obtained through...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Prohibition against involvement in financial transactions based on information obtained through Federal employment. 73.735-803 Section 73.735-803 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION STANDARDS OF CONDUCT Financial...

  3. Computing Reliabilities Of Ceramic Components Subject To Fracture

    NASA Technical Reports Server (NTRS)

    Nemeth, N. N.; Gyekenyesi, J. P.; Manderscheid, J. M.

    1992-01-01

    CARES calculates fast-fracture reliability or failure probability of macroscopically isotropic ceramic components. Program uses results from commercial structural-analysis program (MSC/NASTRAN or ANSYS) to evaluate reliability of component in presence of inherent surface- and/or volume-type flaws. Computes measure of reliability by use of finite-element mathematical model applicable to multiple materials in sense model made function of statistical characterizations of many ceramic materials. Reliability analysis uses element stress, temperature, area, and volume outputs, obtained from two-dimensional shell and three-dimensional solid isoparametric or axisymmetric finite elements. Written in FORTRAN 77.

  4. The Americleft Speech Project: A Training and Reliability Study

    PubMed Central

    Chapman, Kathy L.; Baylis, Adriane; Trost-Cardamone, Judith; Cordero, Kelly Nett; Dixon, Angela; Dobbelsteyn, Cindy; Thurmes, Anna; Wilson, Kristina; Harding-Bell, Anne; Sweeney, Triona; Stoddard, Gregory; Sell, Debbie

    2017-01-01

    Objective To describe the results of two reliability studies and to assess the effect of training on interrater reliability scores. Design The first study (1) examined interrater and intrarater reliability scores (weighted and unweighted kappas) and (2) compared interrater reliability scores before and after training on the use of the Cleft Audit Protocol for Speech–Augmented (CAPS-A) with British English-speaking children. The second study examined interrater and intrarater reliability on a modified version of the CAPS-A (CAPS-A Americleft Modification) with American and Canadian English-speaking children. Finally, comparisons were made between the interrater and intrarater reliability scores obtained for Study 1 and Study 2. Participants The participants were speech-language pathologists from the Americleft Speech Project. Results In Study 1, interrater reliability scores improved for 6 of the 13 parameters following training on the CAPS-A protocol. Comparison of the reliability results for the two studies indicated lower scores for Study 2 compared with Study 1. However, this appeared to be an artifact of the kappa statistic that occurred due to insufficient variability in the reliability samples for Study 2. When percent agreement scores were also calculated, the ratings appeared similar across Study 1 and Study 2. Conclusion The findings of this study suggested that improvements in interrater reliability could be obtained following a program of systematic training. However, improvements were not uniform across all parameters. Acceptable levels of reliability were achieved for those parameters most important for evaluation of velopharyngeal function. PMID:25531738

  5. Computer Programs for Obtaining and Analyzing Daily Mean Steamflow Data from the U.S. Geological Survey National Water Information System Web Site

    USGS Publications Warehouse

    Granato, Gregory E.

    2009-01-01

    Research Council, 2004). The USGS maintains the National Water Information System (NWIS), a distributed network of computers and file servers used to store and retrieve hydrologic data (Mathey, 1998; U.S. Geological Survey, 2008). NWISWeb is an online version of this database that includes water data from more than 24,000 streamflow-gaging stations throughout the United States (U.S. Geological Survey, 2002, 2008). Information from NWISWeb is commonly used to characterize streamflows at gaged sites and to help predict streamflows at ungaged sites. Five computer programs were developed for obtaining and analyzing streamflow from the National Water Information System (NWISWeb). The programs were developed as part of a study by the U.S. Geological Survey, in cooperation with the Federal Highway Administration, to develop a stochastic empirical loading and dilution model. The programs were developed because reliable, efficient, and repeatable methods are needed to access and process streamflow information and data. The first program is designed to facilitate the downloading and reformatting of NWISWeb streamflow data. The second program is designed to facilitate graphical analysis of streamflow data. The third program is designed to facilitate streamflow-record extension and augmentation to help develop long-term statistical estimates for sites with limited data. The fourth program is designed to facilitate statistical analysis of streamflow data. The fifth program is a preprocessor to create batch input files for the U.S. Environmental Protection Agency DFLOW3 program for calculating low-flow statistics. These computer programs were developed to facilitate the analysis of daily mean streamflow data for planning-level water-quality analyses but also are useful for many other applications pertaining to streamflow data and statistics. These programs and the associated documentation are included on the CD-ROM accompanying this report. This report and the appendixes on the

  6. Constructing the 'Best' Reliability Data for the Job - Developing Generic Reliability Data from Alternative Sources Early in a Product's Development Phase

    NASA Technical Reports Server (NTRS)

    Kleinhammer, Roger K.; Graber, Robert R.; DeMott, D. L.

    2016-01-01

    Reliability practitioners advocate getting reliability involved early in a product development process. However, when assigned to estimate or assess the (potential) reliability of a product or system early in the design and development phase, they are faced with lack of reasonable models or methods for useful reliability estimation. Developing specific data is costly and time consuming. Instead, analysts rely on available data to assess reliability. Finding data relevant to the specific use and environment for any project is difficult, if not impossible. Instead, analysts attempt to develop the "best" or composite analog data to support the assessments. Industries, consortia and vendors across many areas have spent decades collecting, analyzing and tabulating fielded item and component reliability performance in terms of observed failures and operational use. This data resource provides a huge compendium of information for potential use, but can also be compartmented by industry, difficult to find out about, access, or manipulate. One method used incorporates processes for reviewing these existing data sources and identifying the available information based on similar equipment, then using that generic data to derive an analog composite. Dissimilarities in equipment descriptions, environment of intended use, quality and even failure modes impact the "best" data incorporated in an analog composite. Once developed, this composite analog data provides a "better" representation of the reliability of the equipment or component. It can be used to support early risk or reliability trade studies, or analytical models to establish the predicted reliability data points. It also establishes a baseline prior that may updated based on test data or observed operational constraints and failures, i.e., using Bayesian techniques. This tutorial presents a descriptive compilation of historical data sources across numerous industries and disciplines, along with examples of contents

  7. A Study of the Accuracy and Reliability of Articles about Alopecia in Newspapers

    PubMed Central

    Park, In Ho; Kim, Do Hyeong; Park, So Hee; Cho, Gyeong Je; Seol, Jung Eun

    2018-01-01

    Background There is growing interest in alopecia among the general population. Many people obtain information from easily accessible media rather than from doctors; thus, the media can play an important role in shaping public opinion. Objective The goal of this study was to evaluate the content and reliability of newspaper articles on alopecia. Methods Newspapers were categorized into three groups: one group of print newspapers and two groups of online newspapers. Online newspapers were further divided into two groups according to type of publishing company; one publishes both print and online newspapers and the other publishes online newspapers only. The most frequently subscribed or circulated newspaper in each group was selected. Articles containing information on alopecia were selected from 3 years of each newspaper and evaluated for reliability. Results Most articles in each group used the general term “alopecia” instead of naming a specific hair loss disease. The majority of articles were based on consultation with experts. Assessment of the accuracy of articles with three grade scales showed that the percentage with high accuracy was 38.9%, 47.2%, and 23.3%. Assessment of reliability scores for five selected articles in each group showed that there were statistically significant differences between common readers and dermatologists (p<0.05). Conclusion The results of this study suggest that closer monitoring of the media is required to supply easily accessible, balanced, and trustworthy information regarding alopecia. PMID:29853745

  8. 25 CFR 162.539 - Must I obtain a WEEL before obtaining a WSR lease?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... AND PERMITS Wind and Solar Resource Leases Wsr Leases § 162.539 Must I obtain a WEEL before obtaining... direct result of energy resource information gathered from a WEEL activity, obtaining a WEEL is not a...

  9. 25 CFR 162.539 - Must I obtain a WEEL before obtaining a WSR lease?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... AND PERMITS Wind and Solar Resource Leases Wsr Leases § 162.539 Must I obtain a WEEL before obtaining... direct result of energy resource information gathered from a WEEL activity, obtaining a WEEL is not a...

  10. Theory of reliable systems. [systems analysis and design

    NASA Technical Reports Server (NTRS)

    Meyer, J. F.

    1973-01-01

    The analysis and design of reliable systems are discussed. The attributes of system reliability studied are fault tolerance, diagnosability, and reconfigurability. Objectives of the study include: to determine properties of system structure that are conducive to a particular attribute; to determine methods for obtaining reliable realizations of a given system; and to determine how properties of system behavior relate to the complexity of fault tolerant realizations. A list of 34 references is included.

  11. Photovoltaic Module Reliability Workshop 2014: February 25-26, 2014

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurtz, S.

    2014-02-01

    NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

  12. Photovoltaic Module Reliability Workshop 2011: February 16-17, 2011

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurtz, S.

    2013-11-01

    NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

  13. Photovoltaic Module Reliability Workshop 2013: February 26-27, 2013

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurtz, S.

    2013-10-01

    NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

  14. Photovoltaic Module Reliability Workshop 2010: February 18-19, 2010

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurtz, J.

    2013-11-01

    NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

  15. Reliability of Pain Measurements Using Computerized Cuff Algometry: A DoloCuff Reliability and Agreement Study.

    PubMed

    Kvistgaard Olsen, Jack; Fener, Dilay Kesgin; Waehrens, Eva Elisabet; Wulf Christensen, Anton; Jespersen, Anders; Danneskiold-Samsøe, Bente; Bartels, Else Marie

    2017-07-01

    Computerized pneumatic cuff pressure algometry (CPA) using the DoloCuff is a new method for pain assessment. Intra- and inter-rater reliabilities have not yet been established. Our aim was to examine the inter- and intrarater reliabilities of DoloCuff measures in healthy subjects. Twenty healthy subjects (ages 20 to 29 years) were assessed three times at 24-hour intervals by two trained raters. Inter-rater reliability was established based on the first and second assessments, whereas intrarater reliability was based on the second and third assessments. Subjects were randomized 1:1 to first assessment at either rater 1 or rater 2. The variables of interest were pressure pain threshold (PT), pressure pain tolerance (PTol), and temporal summation index (TSI). Reliability was estimated by a two-way mixed intraclass correlation coefficient (ICC) absolute agreement analysis. Reliability was considered excellent if ICC > 0.75, fair to good if 0.4 < ICC < 0.75, and poor if ICC < 0.4. Bias and random errors between raters and assessments were evaluated using 95% confidence interval (CI) and Bland-Altman plots. Inter-rater reliability for PT, PTol, and TSI was 0.88 (95% CI: 0.69 to 0.95), 0.86 (95% CI: 0.65 to 0.95), and 0.81 (95% CI: 0.42 to 0.94), respectively. The intrarater reliability for PT, PTol, and TSI was 0.81 (95% CI: 0.53 to 0.92), 0.89 (95% CI: 0.74 to 0.96), and 0.75 (95% CI: 0.28 to 0.91), respectively. Inter-rater reliability was excellent for PT, PTol, and TSI. Similarly, the intrarater reliability for PT and PTol was excellent, while borderline excellent/good for TSI. Therefore, the DoloCuff can be used to obtain reliable measures of pressure pain parameters in healthy subjects. © 2016 World Institute of Pain.

  16. More Reliable Lithium-Sulfur Batteries: Status, Solutions and Prospects.

    PubMed

    Fang, Ruopian; Zhao, Shiyong; Sun, Zhenhua; Wang, Da-Wei; Cheng, Hui-Ming; Li, Feng

    2017-12-01

    Lithium-sulfur (Li-S) batteries have attracted tremendous interest because of their high theoretical energy density and cost effectiveness. The target of Li-S battery research is to produce batteries with a high useful energy density that at least outperforms state-of-the-art lithium-ion batteries. However, due to an intrinsic gap between fundamental research and practical applications, the outstanding electrochemical results obtained in most Li-S battery studies indeed correspond to low useful energy densities and are not really suitable for practical requirements. The Li-S battery is a complex device and its useful energy density is determined by a number of design parameters, most of which are often ignored, leading to the failure to meet commercial requirements. The purpose of this review is to discuss how to pave the way for reliable Li-S batteries. First, the current research status of Li-S batteries is briefly reviewed based on statistical information obtained from literature. This includes an analysis of how the various parameters influence the useful energy density and a summary of existing problems in the current Li-S battery research. Possible solutions and some concerns regarding the construction of reliable Li-S batteries are comprehensively discussed. Finally, insights are offered on the future directions and prospects in Li-S battery field. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Reliability and Maintainability (RAM) Training

    NASA Technical Reports Server (NTRS)

    Lalli, Vincent R. (Editor); Malec, Henry A. (Editor); Packard, Michael H. (Editor)

    2000-01-01

    The theme of this manual is failure physics-the study of how products, hardware, software, and systems fail and what can be done about it. The intent is to impart useful information, to extend the limits of production capability, and to assist in achieving low-cost reliable products. In a broader sense the manual should do more. It should underscore the urgent need CI for mature attitudes toward reliability. Five of the chapters were originally presented as a classroom course to over 1000 Martin Marietta engineers and technicians. Another four chapters and three appendixes have been added, We begin with a view of reliability from the years 1940 to 2000. Chapter 2 starts the training material with a review of mathematics and a description of what elements contribute to product failures. The remaining chapters elucidate basic reliability theory and the disciplines that allow us to control and eliminate failures.

  18. Feasibility of Obtaining Quantitative 3-Dimensional Information Using Conventional Endoscope: A Pilot Study

    PubMed Central

    Hyun, Jong Jin; Keum, Bora; Seo, Yeon Seok; Kim, Yong Sik; Jeen, Yoon Tae; Lee, Hong Sik; Um, Soon Ho; Kim, Chang Duck; Ryu, Ho Sang; Lim, Jong-Wook; Woo, Dong-Gi; Kim, Young-Joong; Lim, Myo-Taeg

    2012-01-01

    Background/Aims Three-dimensional (3D) imaging is gaining popularity and has been partly adopted in laparoscopic surgery or robotic surgery but has not been applied to gastrointestinal endoscopy. As a first step, we conducted an experiment to evaluate whether images obtained by conventional gastrointestinal endoscopy could be used to acquire quantitative 3D information. Methods Two endoscopes (GIF-H260) were used in a Borrmann type I tumor model made of clay. The endoscopes were calibrated by correcting the barrel distortion and perspective distortion. Obtained images were converted to gray-level image, and the characteristics of the images were obtained by edge detection. Finally, data on 3D parameters were measured by using epipolar geometry, two view geometry, and pinhole camera model. Results The focal length (f) of endoscope at 30 mm was 258.49 pixels. Two endoscopes were fixed at predetermined distance, 12 mm (d12). After matching and calculating disparity (v2-v1), which was 106 pixels, the calculated length between the camera and object (L) was 29.26 mm. The height of the object projected onto the image (h) was then applied to the pinhole camera model, and the result of H (height and width) was 38.21 mm and 41.72 mm, respectively. Measurements were conducted from 2 different locations. The measurement errors ranged from 2.98% to 7.00% with the current Borrmann type I tumor model. Conclusions It was feasible to obtain parameters necessary for 3D analysis and to apply the data to epipolar geometry with conventional gastrointestinal endoscope to calculate the size of an object. PMID:22977798

  19. 40 CFR 2.309 - Special rules governing certain information obtained under the Marine Protection, Research and...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... information obtained under the Marine Protection, Research and Sanctuaries Act of 1972. 2.309 Section 2.309... Protection, Research and Sanctuaries Act of 1972. (a) Definitions. For the purposes of this section: (1) Act means the Marine Protection, Research and Sanctuaries Act of 1972, 33 U.S.C. 1401 et seq. (2) Permit...

  20. Procedures of recruiting, obtaining informed consent, and compensating research participants in Qatar: findings from a qualitative investigation.

    PubMed

    Killawi, Amal; Khidir, Amal; Elnashar, Maha; Abdelrahim, Huda; Hammoud, Maya; Elliott, Heather; Thurston, Michelle; Asad, Humna; Al-Khal, Abdul Latif; Fetters, Michael D

    2014-02-04

    Very few researchers have reported on procedures of recruiting, obtaining informed consent, and compensating participants in health research in the Arabian Gulf Region. Empirical research can inform the debate about whether to adjust these procedures for culturally diverse settings. Our objective was to delineate procedures related to recruiting, obtaining informed consent, and compensating health research participants in the extremely high-density multicultural setting of Qatar. During a multistage mixed methods project, field observations and qualitative interviews were conducted in a general medicine clinic of a major medical center in Qatar. Participants were chosen based on gender, age, literacy, and preferred language, i.e., Arabic, English, Hindi and Urdu. Qualitative analysis identified themes about recruitment, informed consent, compensation, and other research procedures. A total of 153 individuals were approached and 84 enrolled; the latter showed a diverse age range (18 to 75 years); varied language representation: Arabic (n = 24), English (n = 20), Hindi (n = 20), and Urdu (n = 20); and balanced gender distribution: women (n = 43) and men (n = 41). Primary reasons for 30 declinations included concern about interview length and recording. The study achieved a 74% participation rate. Qualitative analytics revealed key themes about hesitation to participate, decisions about participation with family members as well as discussions with them as "incidental research participants", the informed consent process, privacy and gender rules of the interview environment, reactions to member checking and compensation, and motivation for participating. Vulnerability emerged as a recurring issue throughout the process among a minority of participants. This study from Qatar is the first to provide empirical data on recruitment, informed consent, compensation and other research procedures in a general adult population in the Middle East and Arabian Gulf. This

  1. The Reliability and Stability of an Inferred Phylogenetic Tree from Empirical Data.

    PubMed

    Katsura, Yukako; Stanley, Craig E; Kumar, Sudhir; Nei, Masatoshi

    2017-03-01

    The reliability of a phylogenetic tree obtained from empirical data is usually measured by the bootstrap probability (Pb) of interior branches of the tree. If the bootstrap probability is high for most branches, the tree is considered to be reliable. If some interior branches show relatively low bootstrap probabilities, we are not sure that the inferred tree is really reliable. Here, we propose another quantity measuring the reliability of the tree called the stability of a subtree. This quantity refers to the probability of obtaining a subtree (Ps) of an inferred tree obtained. We then show that if the tree is to be reliable, both Pb and Ps must be high. We also show that Ps is given by a bootstrap probability of the subtree with the closest outgroup sequence, and computer program RESTA for computing the Pb and Ps values will be presented. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

  2. Integrating Reliability Analysis with a Performance Tool

    NASA Technical Reports Server (NTRS)

    Nicol, David M.; Palumbo, Daniel L.; Ulrey, Michael

    1995-01-01

    A large number of commercial simulation tools support performance oriented studies of complex computer and communication systems. Reliability of these systems, when desired, must be obtained by remodeling the system in a different tool. This has obvious drawbacks: (1) substantial extra effort is required to create the reliability model; (2) through modeling error the reliability model may not reflect precisely the same system as the performance model; (3) as the performance model evolves one must continuously reevaluate the validity of assumptions made in that model. In this paper we describe an approach, and a tool that implements this approach, for integrating a reliability analysis engine into a production quality simulation based performance modeling tool, and for modeling within such an integrated tool. The integrated tool allows one to use the same modeling formalisms to conduct both performance and reliability studies. We describe how the reliability analysis engine is integrated into the performance tool, describe the extensions made to the performance tool to support the reliability analysis, and consider the tool's performance.

  3. A reliable facility location design model with site-dependent disruption in the imperfect information context

    PubMed Central

    Yun, Lifen; Wang, Xifu; Fan, Hongqiang; Li, Xiaopeng

    2017-01-01

    This paper proposes a reliable facility location design model under imperfect information with site-dependent disruptions; i.e., each facility is subject to a unique disruption probability that varies across the space. In the imperfect information contexts, customers adopt a realistic “trial-and-error” strategy to visit facilities; i.e., they visit a number of pre-assigned facilities sequentially until they arrive at the first operational facility or give up looking for the service. This proposed model aims to balance initial facility investment and expected long-term operational cost by finding the optimal facility locations. A nonlinear integer programming model is proposed to describe this problem. We apply a linearization technique to reduce the difficulty of solving the proposed model. A number of problem instances are studied to illustrate the performance of the proposed model. The results indicate that our proposed model can reveal a number of interesting insights into the facility location design with site-dependent disruptions, including the benefit of backup facilities and system robustness against variation of the loss-of-service penalty. PMID:28486564

  4. Development of a reliable estimation procedure of radioactivity inventory in a BWR plant due to neutron irradiation for decommissioning

    NASA Astrophysics Data System (ADS)

    Tanaka, Ken-ichi; Ueno, Jun

    2017-09-01

    Reliable information of radioactivity inventory resulted from the radiological characterization is important in order to plan decommissioning planning and is also crucial in order to promote decommissioning in effectiveness and in safe. The information is referred to by planning of decommissioning strategy and by an application to regulator. Reliable information of radioactivity inventory can be used to optimize the decommissioning processes. In order to perform the radiological characterization reliably, we improved a procedure of an evaluation of neutron-activated materials for a Boiling Water Reactor (BWR). Neutron-activated materials are calculated with calculation codes and their validity should be verified with measurements. The evaluation of neutron-activated materials can be divided into two processes. One is a distribution calculation of neutron-flux. Another is an activation calculation of materials. The distribution calculation of neutron-flux is performed with neutron transport calculation codes with appropriate cross section library to simulate neutron transport phenomena well. Using the distribution of neutron-flux, we perform distribution calculations of radioactivity concentration. We also estimate a time dependent distribution of radioactivity classification and a radioactive-waste classification. The information obtained from the evaluation is utilized by other tasks in the preparatory tasks to make the decommissioning plan and the activity safe and rational.

  5. Completeness and reliability of mortality data in Viet Nam: Implications for the national routine health management information system

    PubMed Central

    Phuong Hoa, Nguyen; Walker, Sue M.; Hill, Peter S.; Rao, Chalapati

    2018-01-01

    Background Mortality statistics form a crucial component of national Health Management Information Systems (HMIS). However, there are limitations in the availability and quality of mortality data at national level in Viet Nam. This study assessed the completeness of recorded deaths and the reliability of recorded causes of death (COD) in the A6 death registers in the national routine HMIS in Viet Nam. Methodology and findings 1477 identified deaths in 2014 were reviewed in two provinces. A capture-recapture method was applied to assess the completeness of the A6 death registers. 1365 household verbal autopsy (VA) interviews were successfully conducted, and these were reviewed by physicians who assigned multiple and underlying cause of death (UCOD). These UCODs from VA were then compared with the CODs recorded in the A6 death registers, using kappa scores to assess the reliability of the A6 death register diagnoses. The overall completeness of the A6 death registers in the two provinces was 89.3% (95%CI: 87.8–90.8). No COD recorded in the A6 death registers demonstrated good reliability. There is very low reliability in recording of cardiovascular deaths (kappa for stroke = 0.47 and kappa for ischaemic heart diseases = 0.42) and diabetes (kappa = 0.33). The reporting of deaths due to road traffic accidents, HIV and some cancers are at a moderate level of reliability with kappa scores ranging between 0.57–0.69 (p<0.01). VA methods identify more specific COD than the A6 death registers, and also allow identification of multiple CODs. Conclusions The study results suggest that data completeness in HMIS A6 death registers in the study sample of communes was relatively high (nearly 90%), but triangulation with death records from other sources would improve the completeness of this system. Further, there is an urgent need to enhance the reliability of COD recorded in the A6 death registers, for which VA methods could be effective. Focussed consultation among

  6. Completeness and reliability of mortality data in Viet Nam: Implications for the national routine health management information system.

    PubMed

    Hong, Tran Thi; Phuong Hoa, Nguyen; Walker, Sue M; Hill, Peter S; Rao, Chalapati

    2018-01-01

    Mortality statistics form a crucial component of national Health Management Information Systems (HMIS). However, there are limitations in the availability and quality of mortality data at national level in Viet Nam. This study assessed the completeness of recorded deaths and the reliability of recorded causes of death (COD) in the A6 death registers in the national routine HMIS in Viet Nam. 1477 identified deaths in 2014 were reviewed in two provinces. A capture-recapture method was applied to assess the completeness of the A6 death registers. 1365 household verbal autopsy (VA) interviews were successfully conducted, and these were reviewed by physicians who assigned multiple and underlying cause of death (UCOD). These UCODs from VA were then compared with the CODs recorded in the A6 death registers, using kappa scores to assess the reliability of the A6 death register diagnoses. The overall completeness of the A6 death registers in the two provinces was 89.3% (95%CI: 87.8-90.8). No COD recorded in the A6 death registers demonstrated good reliability. There is very low reliability in recording of cardiovascular deaths (kappa for stroke = 0.47 and kappa for ischaemic heart diseases = 0.42) and diabetes (kappa = 0.33). The reporting of deaths due to road traffic accidents, HIV and some cancers are at a moderate level of reliability with kappa scores ranging between 0.57-0.69 (p<0.01). VA methods identify more specific COD than the A6 death registers, and also allow identification of multiple CODs. The study results suggest that data completeness in HMIS A6 death registers in the study sample of communes was relatively high (nearly 90%), but triangulation with death records from other sources would improve the completeness of this system. Further, there is an urgent need to enhance the reliability of COD recorded in the A6 death registers, for which VA methods could be effective. Focussed consultation among stakeholders is needed to develop a suitable mechanism and

  7. Can reliable sage-grouse lek counts be obtained using aerial infrared technology

    USGS Publications Warehouse

    Gillette, Gifford L.; Coates, Peter S.; Petersen, Steven; Romero, John P.

    2013-01-01

    More effective methods for counting greater sage-grouse (Centrocercus urophasianus) are needed to better assess population trends through enumeration or location of new leks. We describe an aerial infrared technique for conducting sage-grouse lek counts and compare this method with conventional ground-based lek count methods. During the breeding period in 2010 and 2011, we surveyed leks from fixed-winged aircraft using cryogenically cooled mid-wave infrared cameras and surveyed the same leks on the same day from the ground following a standard lek count protocol. We did not detect significant differences in lek counts between surveying techniques. These findings suggest that using a cryogenically cooled mid-wave infrared camera from an aerial platform to conduct lek surveys is an effective alternative technique to conventional ground-based methods, but further research is needed. We discuss multiple advantages to aerial infrared surveys, including counting in remote areas, representing greater spatial variation, and increasing the number of counted leks per season. Aerial infrared lek counts may be a valuable wildlife management tool that releases time and resources for other conservation efforts. Opportunities exist for wildlife professionals to refine and apply aerial infrared techniques to wildlife monitoring programs because of the increasing reliability and affordability of this technology.

  8. Reliability of cystometrically obtained intravesical pressures in patients with neurogenic bladders.

    PubMed

    Hess, Marika J; Lim, Lance; Yalla, Subbarao V

    2002-01-01

    Urodynamic studies in patients with neurogenic bladder detect and categorize neurourodynamic states, identify the risk for urologic sequelae, and determine the necessity for interventions. Because urodynamic studies serves as a prognostic indicator and guides patient management, pressure measurements during the study must accurately represent bladder function under physiologic conditions. Because nonphysiologic bladder filling used during conventional urodynamic studies may alter the bladder's accommodative properties, we studied how closely the intravesical pressures obtained before filling cystometry resembled those obtained during the filling phase of the cystometrogram. Twenty-two patients (21 men, 1 woman) with neurogenic bladders underwent standard urodynamic studies. A 16F triple-lumen catheter was inserted into the bladder, and the intravesical pressures were recorded (physiologic volume-specific pressures, PVSP). After emptying the bladder, an equal volume of normal saline solution was reinfused, and the pressures were recorded again (cystometric volume-specific pressure, CVSP). All patients underwent routine fluoroscopically assisted urodynamic testing. The PVSP and the CVSP were compared using the Wilcoxon signed ranks test. P value of .05 was significant. The mean PVSP was 14.5 cmH2O (range, 4-42 cmH2O) and mean CVSP was 20.6 cmH2O (range, 6-70 cmH2O). The CVSP was significantly higher than the PVSP (P = .01). Filling pressures during cystometry (CVSP) were significantly higher than the pressures measured at rest (PVSP). This study also suggests a strong correlation between PVSP and CVSP.

  9. Obtaining land cover changes information from multitemporal analysis of Landsat-TM images: results from a case study in West African dryland

    NASA Astrophysics Data System (ADS)

    Nutini, F.; Boschetti, M.; Brivio, P. A.; Antoninetti, M.

    2012-04-01

    The Sahelian belt of West Africa is a semiarid region characterized by wide climate variations, which can in turn affect the livelihood of local populations particularly in rangeland areas, as happens during the dramatic food crisis in the 70-80s caused by rainfall scarcity. The monitoring of natural resources and rainfed agricultural activities, with the aim to provide information to support Sahelian food security action, needs the production of detailed thematic maps as emphasized by several scientific papers. In this framework, a study was conducted to develop a method to exploit time series of remote sensed satellite data to 1) provide reliable land cover (LC) map at local scale in a dry region and 2) obtain a LC change (LCC) map that contribute to identify the plausible causes of local environmental instability. Satellite images used for this work consist in a time series of Landsat Thematic Mapper (TM) (path row 195-50) acquired in the 2000 (6 scenes) and 2007 (9 scenes) from February (Dry season) to September (end of wet season). The study investigates the different contribution provided by spectra information of a single Landsat TM image and by time series of derived NDVI. Different tests have been conducted with different combination of data set (spectral and temporal)in order to identify the best approach to obtain a LC map in five classes of interest: Shrubland, Cultivated Land, Water body, Herbaceous vegetation and Bare soil. The best classification approach is exposed and applied on two years in the last decade. The comparison between this two LC results in land cover change map, that displays the changes of vegetation patterns that have been characterized the area. The discussed results show a largely stable dryland region, but locally characterized by hot-spot of decreasing in natural vegetation inside the rangelands and an increasing of cultivations along fossil valleys where human activities are slightly intense. The discussion shows that this hot

  10. Mission Reliability Estimation for Repairable Robot Teams

    NASA Technical Reports Server (NTRS)

    Trebi-Ollennu, Ashitey; Dolan, John; Stancliff, Stephen

    2010-01-01

    A mission reliability estimation method has been designed to translate mission requirements into choices of robot modules in order to configure a multi-robot team to have high reliability at minimal cost. In order to build cost-effective robot teams for long-term missions, one must be able to compare alternative design paradigms in a principled way by comparing the reliability of different robot models and robot team configurations. Core modules have been created including: a probabilistic module with reliability-cost characteristics, a method for combining the characteristics of multiple modules to determine an overall reliability-cost characteristic, and a method for the generation of legitimate module combinations based on mission specifications and the selection of the best of the resulting combinations from a cost-reliability standpoint. The developed methodology can be used to predict the probability of a mission being completed, given information about the components used to build the robots, as well as information about the mission tasks. In the research for this innovation, sample robot missions were examined and compared to the performance of robot teams with different numbers of robots and different numbers of spare components. Data that a mission designer would need was factored in, such as whether it would be better to have a spare robot versus an equivalent number of spare parts, or if mission cost can be reduced while maintaining reliability using spares. This analytical model was applied to an example robot mission, examining the cost-reliability tradeoffs among different team configurations. Particularly scrutinized were teams using either redundancy (spare robots) or repairability (spare components). Using conservative estimates of the cost-reliability relationship, results show that it is possible to significantly reduce the cost of a robotic mission by using cheaper, lower-reliability components and providing spares. This suggests that the

  11. Reliability and validity: Part II.

    PubMed

    Davis, Debora Winders

    2004-01-01

    Determining measurement reliability and validity involves complex processes. There is usually room for argument about most instruments. It is important that the researcher clearly describes the processes upon which she made the decision to use a particular instrument, and presents the evidence available showing that the instrument is reliable and valid for the current purposes. In some cases, the researcher may need to conduct pilot studies to obtain evidence upon which to decide whether the instrument is valid for a new population or a different setting. In all cases, the researcher must present a clear and complete explanation for the choices, she has made regarding reliability and validity. The consumer must then judge the degree to which the researcher has provided adequate and theoretically sound rationale. Although I have tried to touch on most of the important concepts related to measurement reliability and validity, it is beyond the scope of this column to be exhaustive. There are textbooks devoted entirely to specific measurement issues if readers require more in-depth knowledge.

  12. Results of a Demonstration Assessment of Passive System Reliability Utilizing the Reliability Method for Passive Systems (RMPS)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bucknor, Matthew; Grabaskas, David; Brunett, Acacia

    2015-04-26

    Advanced small modular reactor designs include many advantageous design features such as passively driven safety systems that are arguably more reliable and cost effective relative to conventional active systems. Despite their attractiveness, a reliability assessment of passive systems can be difficult using conventional reliability methods due to the nature of passive systems. Simple deviations in boundary conditions can induce functional failures in a passive system, and intermediate or unexpected operating modes can also occur. As part of an ongoing project, Argonne National Laboratory is investigating various methodologies to address passive system reliability. The Reliability Method for Passive Systems (RMPS), amore » systematic approach for examining reliability, is one technique chosen for this analysis. This methodology is combined with the Risk-Informed Safety Margin Characterization (RISMC) approach to assess the reliability of a passive system and the impact of its associated uncertainties. For this demonstration problem, an integrated plant model of an advanced small modular pool-type sodium fast reactor with a passive reactor cavity cooling system is subjected to a station blackout using RELAP5-3D. This paper discusses important aspects of the reliability assessment, including deployment of the methodology, the uncertainty identification and quantification process, and identification of key risk metrics.« less

  13. Reliability prediction of large fuel cell stack based on structure stress analysis

    NASA Astrophysics Data System (ADS)

    Liu, L. F.; Liu, B.; Wu, C. W.

    2017-09-01

    The aim of this paper is to improve the reliability of Proton Electrolyte Membrane Fuel Cell (PEMFC) stack by designing the clamping force and the thickness difference between the membrane electrode assembly (MEA) and the gasket. The stack reliability is directly determined by the component reliability, which is affected by the material property and contact stress. The component contact stress is a random variable because it is usually affected by many uncertain factors in the production and clamping process. We have investigated the influences of parameter variation coefficient on the probability distribution of contact stress using the equivalent stiffness model and the first-order second moment method. The optimal contact stress to make the component stay in the highest level reliability is obtained by the stress-strength interference model. To obtain the optimal contact stress between the contact components, the optimal thickness of the component and the stack clamping force are optimally designed. Finally, a detailed description is given how to design the MEA and gasket dimensions to obtain the highest stack reliability. This work can provide a valuable guidance in the design of stack structure for a high reliability of fuel cell stack.

  14. Reliability-based econometrics of aerospace structural systems: Design criteria and test options. Ph.D. Thesis - Georgia Inst. of Tech.

    NASA Technical Reports Server (NTRS)

    Thomas, J. M.; Hanagud, S.

    1974-01-01

    The design criteria and test options for aerospace structural reliability were investigated. A decision methodology was developed for selecting a combination of structural tests and structural design factors. The decision method involves the use of Bayesian statistics and statistical decision theory. Procedures are discussed for obtaining and updating data-based probabilistic strength distributions for aerospace structures when test information is available and for obtaining subjective distributions when data are not available. The techniques used in developing the distributions are explained.

  15. Comparison of Three Information Sources for Smoking Information in Electronic Health Records

    PubMed Central

    Wang, Liwei; Ruan, Xiaoyang; Yang, Ping; Liu, Hongfang

    2016-01-01

    OBJECTIVE The primary aim was to compare independent and joint performance of retrieving smoking status through different sources, including narrative text processed by natural language processing (NLP), patient-provided information (PPI), and diagnosis codes (ie, International Classification of Diseases, Ninth Revision [ICD-9]). We also compared the performance of retrieving smoking strength information (ie, heavy/light smoker) from narrative text and PPI. MATERIALS AND METHODS Our study leveraged an existing lung cancer cohort for smoking status, amount, and strength information, which was manually chart-reviewed. On the NLP side, smoking-related electronic medical record (EMR) data were retrieved first. A pattern-based smoking information extraction module was then implemented to extract smoking-related information. After that, heuristic rules were used to obtain smoking status-related information. Smoking information was also obtained from structured data sources based on diagnosis codes and PPI. Sensitivity, specificity, and accuracy were measured using patients with coverage (ie, the proportion of patients whose smoking status/strength can be effectively determined). RESULTS NLP alone has the best overall performance for smoking status extraction (patient coverage: 0.88; sensitivity: 0.97; specificity: 0.70; accuracy: 0.88); combining PPI with NLP further improved patient coverage to 0.96. ICD-9 does not provide additional improvement to NLP and its combination with PPI. For smoking strength, combining NLP with PPI has slight improvement over NLP alone. CONCLUSION These findings suggest that narrative text could serve as a more reliable and comprehensive source for obtaining smoking-related information than structured data sources. PPI, the readily available structured data, could be used as a complementary source for more comprehensive patient coverage. PMID:27980387

  16. Caregiver-proxy reliability of the Igbo-culture adapted Maleka Stroke Community Reintegration Measure: a validation study.

    PubMed

    Okoye, Emmanuel Chiebuka; Awhen, Peter Agba; Akosile, Christopher Olusanjo; Maruf, Fatai Adesina; Iheukwumere, Ngozi; Egwuonwu, Afamefuna Victor

    2017-09-01

    This study was designed to determine the caregiver-proxy reliability of the Igbo-culture adapted urban version of the Maleka Stroke Community Reintegration Measure (I-MSCRIM). This was a validation study involving 74 consenting stroke survivors and their 74 primary informal caregivers consecutively recruited from selected tertiary hospitals in South-East Nigeria (Igboland). The I-MSCRIM was researcher-administered to the participants. Obtained data was analyzed using frequency counts, percentages, range, mean, standard deviation, Spearman rank order correlation, Mann-Whitney U test, Kruskal-Wallis test and Intra-class Correlation Coefficient. Alpha level was set at 0.05. The mean ages of the stroke survivors (55.4% males) and their primary informal caregivers (41.9% males) were 50.14 ± 12.24 and 31.93 ± 10.9 years respectively. There was no significant difference in the community reintegration (CR) scores as rated by stroke survivors and their primary informal caregivers (p > 0.05). The correlations between stroke survivors' and primary informal caregivers' rated CR scores were all adequate and acceptable (ICC = 0.602-0.917). The discrepancy in the total CR scores between the two ratings was significantly influenced by primary informal caregivers' educational attainment (k = 13.15; p < 0.01). The I-MSCRIM has acceptable caregiver-proxy reliability among Igbo stroke survivors in South-East Nigeria. This suggests that primary informal caregivers of stroke survivors can reliably estimate the CR of their care recipients when I-MSCRIM is administered to them. This will be useful when a stroke survivor cannot respond to I-MSCRIM.

  17. Obtaining and providing health information in the community pharmacy setting.

    PubMed

    Iwanowicz, Susan L; Marciniak, Macary Weck; Zeolla, Mario M

    2006-06-15

    Community pharmacists are a valuable information resource for patients and other healthcare providers. The advent of new information technology, most notably the Internet, coupled with the rapid availability of new healthcare information, has fueled this demand. Pharmacy students must receive training that enables them to meet this need. Community advanced pharmacy practice experiences (APPEs) provide an excellent opportunity for students to develop and master drug information skills in a real-world setting. Preceptors must ensure that students are familiar with drug information resources and can efficiently identify the most useful resource for a given topic. Students must also be trained to assess the quality of resources and use this information to effectively respond to drug or health information inquiries. This article will discuss key aspects of providing drug information in the community pharmacy setting and can serve as a guide and resource for APPE preceptors.

  18. Obtaining and Providing Health Information in the Community Pharmacy Setting

    PubMed Central

    Iwanowicz, Susan L.; Marciniak, Macary Weck; Zeolla, Mario M.

    2006-01-01

    Community pharmacists are a valuable information resource for patients and other healthcare providers. The advent of new information technology, most notably the Internet, coupled with the rapid availability of new healthcare information, has fueled this demand. Pharmacy students must receive training that enables them to meet this need. Community advanced pharmacy practice experiences (APPEs) provide an excellent opportunity for students to develop and master drug information skills in a real-world setting. Preceptors must ensure that students are familiar with drug information resources and can efficiently identify the most useful resource for a given topic. Students must also be trained to assess the quality of resources and use this information to effectively respond to drug or health information inquiries. This article will discuss key aspects of providing drug information in the community pharmacy setting and can serve as a guide and resource for APPE preceptors. PMID:17136178

  19. Can Internet information on vertebroplasty be a reliable means of patient self-education?

    PubMed

    Sullivan, T Barrett; Anderson, Joshua T; Ahn, Uri M; Ahn, Nicholas U

    2014-05-01

    -nine percent of sites provided step-by-step descriptions of the procedure, and 44% of sites also included images. Alternative treatments were mentioned by 51% of sites. Twenty-seven percent of sites referenced peer-reviewed literature, 41% offered experiential or noncited data based on American populations, and 7% offered analogous data from international populations. Thirty percent of sites provided contact information for patient appointment scheduling. Seven percent of sites were classified as excellent quality, 6% as high quality, 11% as moderate quality, 19% as poor quality, and 57% as unacceptable. Sixteen percent of sites were sponsored by academic institutions, 62% by private groups, 8% by biomedical device companies, and 14% were sponsored otherwise. Academic sites reported fewer risks of the procedure than private sites or other sites (p = 0.05 and p = 0.04), but reported more risks than industry sites (p = 0.007). Academic sites were more likely than sites classified as other to offer contact information for patient appointment scheduling (p = 0.004). Nine percent of sites evaluated were Health on the Net Foundation (HONCode) certified. No association with improved information quality was observed in these sites relative to noncertified sites (all p > 0.05). Internet information regarding vertebroplasty is not only inadequate for proper patient education, but also potentially misleading as sites are more likely to present benefits of the procedure than risks. Although academic sites might be expected to offer higher-quality information than private, industry, or other sites, our data would suggest that they do not. HONCode certification cannot be used reliably as a means of qualifying website information quality. Academic sites should be expected to set a high standard and alter their Internet presence with adequate information distribution. Certification bodies also should alter their standards to necessitate provision of complete information in addition

  20. Photovoltaic Module Reliability Workshop 2012: February 28 - March 1, 2012

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurtz, S.

    2013-11-01

    NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

  1. Strategic planning decision making using fuzzy SWOT-TOPSIS with reliability factor

    NASA Astrophysics Data System (ADS)

    Mohamad, Daud; Afandi, Nur Syamimi; Kamis, Nor Hanimah

    2015-10-01

    Strategic planning is a process of decision making and action for long-term activities in an organization. The Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis has been commonly used to help organizations in strategizing their future direction by analyzing internal and external environment. However, SWOT analysis has some limitations as it is unable to prioritize appropriately the multiple alternative strategic decisions. Some efforts have been made to solve this problem by incorporating Multi Criteria Decision Making (MCDM) methods. Nevertheless, another important aspect has raised concerns on obtaining the decision that is the reliability of the information. Decision makers evaluate differently depending on their level of confidence or sureness in the evaluation. This study proposes a decision making procedure for strategic planning using SWOT-TOPSIS method by incorporating the reliability factor of the evaluation based on Z-number. An example using a local authority in the east coast of Malaysia is illustrated to determine the strategic options ranking and to prioritize factors in each SWOT category.

  2. Incorporation of prior information on parameters into nonlinear regression groundwater flow models: 1. Theory

    USGS Publications Warehouse

    Cooley, Richard L.

    1982-01-01

    Prior information on the parameters of a groundwater flow model can be used to improve parameter estimates obtained from nonlinear regression solution of a modeling problem. Two scales of prior information can be available: (1) prior information having known reliability (that is, bias and random error structure) and (2) prior information consisting of best available estimates of unknown reliability. A regression method that incorporates the second scale of prior information assumes the prior information to be fixed for any particular analysis to produce improved, although biased, parameter estimates. Approximate optimization of two auxiliary parameters of the formulation is used to help minimize the bias, which is almost always much smaller than that resulting from standard ridge regression. It is shown that if both scales of prior information are available, then a combined regression analysis may be made.

  3. How reliable are Functional Movement Screening scores? A systematic review of rater reliability.

    PubMed

    Moran, Robert W; Schneiders, Anthony G; Major, Katherine M; Sullivan, S John

    2016-05-01

    Several physical assessment protocols to identify intrinsic risk factors for injury aetiology related to movement quality have been described. The Functional Movement Screen (FMS) is a standardised, field-expedient test battery intended to assess movement quality and has been used clinically in preparticipation screening and in sports injury research. To critically appraise and summarise research investigating the reliability of scores obtained using the FMS battery. Systematic literature review. Systematic search of Google Scholar, Scopus (including ScienceDirect and PubMed), EBSCO (including Academic Search Complete, AMED, CINAHL, Health Source: Nursing/Academic Edition), MEDLINE and SPORTDiscus. Studies meeting eligibility criteria were assessed by 2 reviewers for risk of bias using the Quality Appraisal of Reliability Studies checklist. Overall quality of evidence was determined using van Tulder's levels of evidence approach. 12 studies were appraised. Overall, there was a 'moderate' level of evidence in favour of 'acceptable' (intraclass correlation coefficient ≥0.6) inter-rater and intra-rater reliability for composite scores derived from live scoring. For inter-rater reliability of composite scores derived from video recordings there was 'conflicting' evidence, and 'limited' evidence for intra-rater reliability. For inter-rater reliability based on live scoring of individual subtests there was 'moderate' evidence of 'acceptable' reliability (κ≥0.4) for 4 subtests (Deep Squat, Shoulder Mobility, Active Straight-leg Raise, Trunk Stability Push-up) and 'conflicting' evidence for the remaining 3 (Hurdle Step, In-line Lunge, Rotary Stability). This review found 'moderate' evidence that raters can achieve acceptable levels of inter-rater and intra-rater reliability of composite FMS scores when using live ratings. Overall, there were few high-quality studies, and the quality of several studies was impacted by poor study reporting particularly in relation to

  4. Reliability-based structural optimization: A proposed analytical-experimental study

    NASA Technical Reports Server (NTRS)

    Stroud, W. Jefferson; Nikolaidis, Efstratios

    1993-01-01

    An analytical and experimental study for assessing the potential of reliability-based structural optimization is proposed and described. In the study, competing designs obtained by deterministic and reliability-based optimization are compared. The experimental portion of the study is practical because the structure selected is a modular, actively and passively controlled truss that consists of many identical members, and because the competing designs are compared in terms of their dynamic performance and are not destroyed if failure occurs. The analytical portion of this study is illustrated on a 10-bar truss example. In the illustrative example, it is shown that reliability-based optimization can yield a design that is superior to an alternative design obtained by deterministic optimization. These analytical results provide motivation for the proposed study, which is underway.

  5. 78 FR 73112 - Monitoring System Conditions-Transmission Operations Reliability Standards; Interconnection...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-05

    ..., RM13-14-000 and RM13-15-000] Monitoring System Conditions--Transmission Operations Reliability...) 502-6817, [email protected] . Robert T. Stroh (Legal Information), Office of the General... Reliability Standards ``address the important reliability goal of ensuring that the transmission system is...

  6. Reliability of abstracting performance measures: results of the cardiac rehabilitation referral and reliability (CR3) project.

    PubMed

    Thomas, Randal J; Chiu, Jensen S; Goff, David C; King, Marjorie; Lahr, Brian; Lichtman, Steven W; Lui, Karen; Pack, Quinn R; Shahriary, Melanie

    2014-01-01

    Assessment of the reliability of performance measure (PM) abstraction is an important step in PM validation. Reliability has not been previously assessed for abstracting PMs for the referral of patients to cardiac rehabilitation (CR) and secondary prevention (SP) programs. To help validate these PMs, we carried out a multicenter assessment of their reliability. Hospitals and clinical practices from around the United States were invited to participate in the Cardiac Rehabilitation Referral Reliability (CR3) Project. Twenty-nine hospitals and 23 outpatient centers expressed interest in participating. Seven hospitals and 6 outpatient centers met participation criteria and submitted completed data. Site coordinators identified 35 patients whose charts were reviewed by 2 site abstractors twice, 1 week apart. Percent agreement and the Cohen κ statistic were used to describe intra- and interabstractor reliability for patient eligibility for CR/SP, patient exceptions for CR/SP referral, and documented referral to CR/SP. Results were obtained from within-site data, as well as from pooled data of all inpatient and all outpatient sites. We found that intra-abstractor reliability reflected excellent repeatability (≥ 90% agreement; κ ≥ 0.75) for ratings of CR/SP eligibility, exceptions, and referral, both from pooled and site-specific analyses of inpatient and outpatient data. Similarly, the interabstractor agreement from pooled analysis ranged from good to excellent for the 3 items, although with slightly lower measures of reliability. Abstraction of PMs for CR/SP referral has high reliability, supporting the use of these PMs in quality improvement initiatives aimed at increasing CR/SP delivery to patients with cardiovascular disease.

  7. HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 1: HARP introduction and user's guide

    NASA Technical Reports Server (NTRS)

    Bavuso, Salvatore J.; Rothmann, Elizabeth; Dugan, Joanne Bechta; Trivedi, Kishor S.; Mittal, Nitin; Boyd, Mark A.; Geist, Robert M.; Smotherman, Mark D.

    1994-01-01

    The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed to be compatible with most computing platforms and operating systems, and some programs have been beta tested, within the aerospace community for over 8 years. Volume 1 provides an introduction to the HARP program. Comprehensive information on HARP mathematical models can be found in the references.

  8. Reliability Impacts in Life Support Architecture and Technology Selection

    NASA Technical Reports Server (NTRS)

    Lange Kevin E.; Anderson, Molly S.

    2012-01-01

    Quantitative assessments of system reliability and equivalent system mass (ESM) were made for different life support architectures based primarily on International Space Station technologies. The analysis was applied to a one-year deep-space mission. System reliability was increased by adding redundancy and spares, which added to the ESM. Results were thus obtained allowing a comparison of the ESM for each architecture at equivalent levels of reliability. Although the analysis contains numerous simplifications and uncertainties, the results suggest that achieving necessary reliabilities for deep-space missions will add substantially to the life support ESM and could influence the optimal degree of life support closure. Approaches for reducing reliability impacts were investigated and are discussed.

  9. Forecast Informed Reservoir Operations - An Opportunity to Improve Water Supply Reliability Lake Mendocino Demonstration Project

    NASA Astrophysics Data System (ADS)

    Jasperse, J.; Ralph, F. M.

    2016-12-01

    Forecast Informed Reservoir Operations (FIRO) is a management strategy that is gaining interest in the western United States as a means to improve the performance of reservoirs to provide more reliable water supply for municipal, agricultural, and environmental water needs as well as enhancing the flood protection capacity of reservoirs. Many surface water reservoirs were built decades ago and are operated in accordance with rules that were developed based on the best information at the time of construction. Over time there have been increasing stressors that impact effective reservoir operations including: increasing water demand; providing in-stream flows for habitat of aquatic species; and climate change. Few new reservoirs are being constructed, therefore there is motivation by water managers to more effectively operate existing reservoirs by optimizing operational rules under a decision framework that considers forecasting. The viability of FIRO is being investigated at Lake Mendocino in northern California. This facility is managed for flood protection by the U.S. Army Corps of Engineers (USACE) while the Sonoma County Water Agency (SCWA) is responsible for the management of the water supply pool. Reductions of reservoir inflow due to recent operational license conditions of an upstream hydroelectric facility coupled with highly variable precipitation (due to the significance of atmospheric rivers in the region) has led to difficulties in maintaining reservoir storage to meet stream flows for agricultural and municipal water users and to meet in-stream flow requirements for three salmonid species listed under the Endangered Species Act. The reduced water supply reliability of the reservoir has motivated water managers and scientists from local, state, and federal agencies to investigate whether FIRO could help address this challenge. This effort is led by a Steering Committee comprised of members from SCWA, Scripps-UC San Diego, USACE, NOAA, California

  10. Reliability of a functional test battery evaluating functionality, proprioception, and strength in recreational athletes with functional ankle instability.

    PubMed

    Sekir, U; Yildiz, Y; Hazneci, B; Ors, F; Saka, T; Aydin, T

    2008-12-01

    In contrast to the single evaluation methods used in the past, the combination of multiple tests allows one to obtain a global assessment of the ankle joint. The aim of this study was to determine the reliability of the different tests in a functional test battery. Twenty-four male recreational athletes with unilateral functional ankle instability (FAI) were recruited for this study. One component of the test battery included five different functional ability tests. These tests included a single limb hopping course, single-legged and triple-legged hop for distance, and six and cross six meter hop for time. The ankle joint position sense and one leg standing test were used for evaluation of proprioception and sensorimotor control. The isokinetic strengths of the ankle invertor and evertor muscles were evaluated at a velocity of 120 degrees /s. The reliability of the test battery was assessed by calculating the intraclass correlation coefficient (ICC). Each subject was tested two times, with an interval of 3-5 days between the test sessions. The ICCs for ankle functional and proprioceptive ability showed high reliability (ICCs ranging from 0.94 to 0.98). Additionally, isokinetic ankle joint inversion and eversion strength measurements represented good to high reliability (ICCs between 0.82 and 0.98). The functional test battery investigated in this study proved to be a reliable tool for the assessment of athletes with functional ankle instability. Therefore, clinicians may obtain reliable information from the functional test battery during the assessment of ankle joint performance in patients with functional ankle instability.

  11. Reliability and Agreement in Student Ratings of the Class Environment

    ERIC Educational Resources Information Center

    Nelson, Peter M.; Christ, Theodore J.

    2016-01-01

    The current study estimated the reliability and agreement of student ratings of the classroom environment obtained using the Responsive Environmental Assessment for Classroom Teaching (REACT; Christ, Nelson, & Demers, 2012; Nelson, Demers, & Christ, 2014). Coefficient alpha, class-level reliability, and class agreement indices were…

  12. Data Network Reliability

    DTIC Science & Technology

    1976-07-01

    SECURITY CLASSIFICATION OF THIS PAGEf »«1 Dsta Entered) . ■ .;... .■■.■■.. .■.■■ ,;,: ESL-IR-677 JULY 1976 Ace.:;!"« for FIRST...ANNUAL REPORT (1 Tuly 1975 - 30 June 1976) For the Project DATA NETWORK RELIABILITY Research Supported by INFORMATION PROCESSING TECHNOLOGY... of Technology Cambridge, Massachusetts 02139 DISTRIBUTION STAT Approved for public relcaoe; Distributi n li : ■’ M mmmmm Table of

  13. Reliability approach to rotating-component design. [fatigue life and stress concentration

    NASA Technical Reports Server (NTRS)

    Kececioglu, D. B.; Lalli, V. R.

    1975-01-01

    A probabilistic methodology for designing rotating mechanical components using reliability to relate stress to strength is explained. The experimental test machines and data obtained for steel to verify this methodology are described. A sample mechanical rotating component design problem is solved by comparing a deterministic design method with the new design-by reliability approach. The new method shows that a smaller size and weight can be obtained for specified rotating shaft life and reliability, and uses the statistical distortion-energy theory with statistical fatigue diagrams for optimum shaft design. Statistical methods are presented for (1) determining strength distributions for steel experimentally, (2) determining a failure theory for stress variations in a rotating shaft subjected to reversed bending and steady torque, and (3) relating strength to stress by reliability.

  14. Reliability of reflectance measures in passive filters

    NASA Astrophysics Data System (ADS)

    Saldiva de André, Carmen Diva; Afonso de André, Paulo; Rocha, Francisco Marcelo; Saldiva, Paulo Hilário Nascimento; Carvalho de Oliveira, Regiani; Singer, Julio M.

    2014-08-01

    Measurements of optical reflectance in passive filters impregnated with a reactive chemical solution may be transformed to ozone concentrations via a calibration curve and constitute a low cost alternative for environmental monitoring, mainly to estimate human exposure. Given the possibility of errors caused by exposure bias, it is common to consider sets of m filters exposed during a certain period to estimate the latent reflectance on n different sample occasions at a certain location. Mixed models with sample occasions as random effects are useful to analyze data obtained under such setups. The intra-class correlation coefficient of the mean of the m measurements is an indicator of the reliability of the latent reflectance estimates. Our objective is to determine m in order to obtain a pre-specified reliability of the estimates, taking possible outliers into account. To illustrate the procedure, we consider an experiment conducted at the Laboratory of Experimental Air Pollution, University of São Paulo, Brazil (LPAE/FMUSP), where sets of m = 3 filters were exposed during 7 days on n = 9 different occasions at a certain location. The results show that the reliability of the latent reflectance estimates for each occasion obtained under homoskedasticity is km = 0.74. A residual analysis suggests that the within-occasion variance for two of the occasions should be different from the others. A refined model with two within-occasion variance components was considered, yielding km = 0.56 for these occasions and km = 0.87 for the remaining ones. To guarantee that all estimates have a reliability of at least 80% we require measurements on m = 10 filters on each occasion.

  15. Culture Representation in Human Reliability Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    David Gertman; Julie Marble; Steven Novack

    Understanding human-system response is critical to being able to plan and predict mission success in the modern battlespace. Commonly, human reliability analysis has been used to predict failures of human performance in complex, critical systems. However, most human reliability methods fail to take culture into account. This paper takes an easily understood state of the art human reliability analysis method and extends that method to account for the influence of culture, including acceptance of new technology, upon performance. The cultural parameters used to modify the human reliability analysis were determined from two standard industry approaches to cultural assessment: Hofstede’s (1991)more » cultural factors and Davis’ (1989) technology acceptance model (TAM). The result is called the Culture Adjustment Method (CAM). An example is presented that (1) reviews human reliability assessment with and without cultural attributes for a Supervisory Control and Data Acquisition (SCADA) system attack, (2) demonstrates how country specific information can be used to increase the realism of HRA modeling, and (3) discusses the differences in human error probability estimates arising from cultural differences.« less

  16. Reliability Assessment of a Robust Design Under Uncertainty for a 3-D Flexible Wing

    NASA Technical Reports Server (NTRS)

    Gumbert, Clyde R.; Hou, Gene J. -W.; Newman, Perry A.

    2003-01-01

    The paper presents reliability assessment results for the robust designs under uncertainty of a 3-D flexible wing previously reported by the authors. Reliability assessments (additional optimization problems) of the active constraints at the various probabilistic robust design points are obtained and compared with the constraint values or target constraint probabilities specified in the robust design. In addition, reliability-based sensitivity derivatives with respect to design variable mean values are also obtained and shown to agree with finite difference values. These derivatives allow one to perform reliability based design without having to obtain second-order sensitivity derivatives. However, an inner-loop optimization problem must be solved for each active constraint to find the most probable point on that constraint failure surface.

  17. Reliable absolute analog code retrieval approach for 3D measurement

    NASA Astrophysics Data System (ADS)

    Yu, Shuang; Zhang, Jing; Yu, Xiaoyang; Sun, Xiaoming; Wu, Haibin; Chen, Deyun

    2017-11-01

    The wrapped phase of phase-shifting approach can be unwrapped by using Gray code, but both the wrapped phase error and Gray code decoding error can result in period jump error, which will lead to gross measurement error. Therefore, this paper presents a reliable absolute analog code retrieval approach. The combination of unequal-period Gray code and phase shifting patterns at high frequencies are used to obtain high-frequency absolute analog code, and at low frequencies, the same unequal-period combination patterns are used to obtain the low-frequency absolute analog code. Next, the difference between the two absolute analog codes was employed to eliminate period jump errors, and a reliable unwrapped result can be obtained. Error analysis was used to determine the applicable conditions, and this approach was verified through theoretical analysis. The proposed approach was further verified experimentally. Theoretical analysis and experimental results demonstrate that the proposed approach can perform reliable analog code unwrapping.

  18. Critically re-evaluating a common technique: Accuracy, reliability, and confirmation bias of EMG.

    PubMed

    Narayanaswami, Pushpa; Geisbush, Thomas; Jones, Lyell; Weiss, Michael; Mozaffar, Tahseen; Gronseth, Gary; Rutkove, Seward B

    2016-01-19

    (1) To assess the diagnostic accuracy of EMG in radiculopathy. (2) To evaluate the intrarater reliability and interrater reliability of EMG in radiculopathy. (3) To assess the presence of confirmation bias in EMG. Three experienced academic electromyographers interpreted 3 compact discs with 20 EMG videos (10 normal, 10 radiculopathy) in a blinded, standardized fashion without information regarding the nature of the study. The EMGs were interpreted 3 times (discs A, B, C) 1 month apart. Clinical information was provided only with disc C. Intrarater reliability was calculated by comparing interpretations in discs A and B, interrater reliability by comparing interpretation between reviewers. Confirmation bias was estimated by the difference in correct interpretations when clinical information was provided. Sensitivity was similar to previous reports (77%, confidence interval [CI] 63%-90%); specificity was 71%, CI 56%-85%. Intrarater reliability was good (κ 0.61, 95% CI 0.41-0.81); interrater reliability was lower (κ 0.53, CI 0.35-0.71). There was no substantial confirmation bias when clinical information was provided (absolute difference in correct responses 2.2%, CI -13.3% to 17.7%); the study lacked precision to exclude moderate confirmation bias. This study supports that (1) serial EMG studies should be performed by the same electromyographer since intrarater reliability is better than interrater reliability; (2) knowledge of clinical information does not bias EMG interpretation substantially; (3) EMG has moderate diagnostic accuracy for radiculopathy with modest specificity and electromyographers should exercise caution interpreting mild abnormalities. This study provides Class III evidence that EMG has moderate diagnostic accuracy and specificity for radiculopathy. © 2015 American Academy of Neurology.

  19. Measuring eating disorder attitudes and behaviors: a reliability generalization study

    PubMed Central

    2014-01-01

    Background Although score reliability is a sample-dependent characteristic, researchers often only report reliability estimates from previous studies as justification for employing particular questionnaires in their research. The present study followed reliability generalization procedures to determine the mean score reliability of the Eating Disorder Inventory and its most commonly employed subscales (Drive for Thinness, Bulimia, and Body Dissatisfaction) and the Eating Attitudes Test as a way to better identify those characteristics that might impact score reliability. Methods Published studies that used these measures were coded based on their reporting of reliability information and additional study characteristics that might influence score reliability. Results Score reliability estimates were included in 26.15% of studies using the EDI and 36.28% of studies using the EAT. Mean Cronbach’s alphas for the EDI (total score = .91; subscales = .75 to .89), EAT-40 (total score = .81) and EAT-26 (total score = .86; subscales = .56 to .80) suggested variability in estimated internal consistency. Whereas some EDI subscales exhibited higher score reliability in clinical eating disorder samples than in nonclinical samples, other subscales did not exhibit these differences. Score reliability information for the EAT was primarily reported for nonclinical samples, making it difficult to characterize the effect of type of sample on these measures. However, there was a tendency for mean score reliability to be higher in the adult (vs. adolescent) samples and in female (vs. male) samples. Conclusions Overall, this study highlights the importance of assessing and reporting internal consistency during every test administration because reliability is affected by characteristics of the participants being examined. PMID:24764530

  20. 78 FR 22773 - Revisions to Reliability Standard for Transmission Vegetation Management; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-17

    ...; Order No. 777] Revisions to Reliability Standard for Transmission Vegetation Management; Correction... other requirements the North American Electric Reliability Corporation (NERC) needs to submit when modifying certain Reliability Standards. DATES: Effective on May 28, 2013. FOR FURTHER INFORMATION CONTACT...

  1. [Formal quality assessment of informed consent documents in 9 hospitals].

    PubMed

    Calle-Urra, J E; Parra-Hidalgo, P; Saturno-Hernández, P J; Martínez-Martínez, M J; Navarro-Moya, F J

    2013-01-01

    Informed consent forms are very important in the process of medical information. The aim of this study is to design reliable formal quality criteria of these documents and their application in the evaluation of those used in the hospitals of a regional health service. Criteria have been designed from the analysis of existing regulations, previous studies and consultation with key experts. The interobserver concordance was assessed using the kappa index. Criteria evaluation was performed on 1425 documents of 9 hospitals. A total of 19 criteria used in the evaluation of the quality of informed consent forms have been obtained. Kappa values were higher than 0,60 in 17 of them and higher than 0,52 in the other 2. The average number of defects per document was 7.6, with a high-low ratio among hospitals of 1.84. More than 90% of the documents had defects in the information on consequences and contraindications, and in about 90% it did not mention the copy to the patient. More than 60% did not comply with stating the purpose of the procedure, a statement of having understood and clarified doubts, and the treatment options. A tool has been obtained to reliably assess the formal quality of the informed consent forms. The documents assessed have a wide margin for improvement related to giving a copy to the patient, and some aspects of the specific information that patients should receive. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

  2. Medical Comics as Tools to Aid in Obtaining Informed Consent for Stroke Care.

    PubMed

    Furuno, Yuichi; Sasajima, Hiroyasu

    2015-07-01

    Informed consent has now become common in medical practice. However, a gap still exists between doctors and patients in the understanding of clinical conditions. We designed medical comics about "subarachnoid hemorrhage" and "intracerebral hemorrhage" to help doctors obtain informed consent intuitively, quickly, and comprehensively.Between September 2010 and September 2012, we carried out a questionnaire survey about medical comics with the families of patients who had suffered an intracerebral or subarachnoid hemorrhage. The questionnaire consisted of 6 questions inquiring about their mental condition, reading time, usefulness of the comics in understanding brain function and anatomy, pathogenesis, doctor's explanation, and applicability of these comics.The results showed that 93.8% responders would prefer or strongly prefer the use of comics in other medical situations. When considering the level of understanding of brain function and anatomy, pathology of disease, and doctor's explanation, 81.3%, 75.0%, and 68.8% of responders, respectively, rated these comics as very useful or useful.We think that the visual and narrative illustrations in medical comics would be more helpful for patients than a lengthy explanation by a doctor. Most of the responders hoped that medical comics would be applied to other medical cases. Thus, medical comics could work as a new communication tool between doctors and patients.

  3. On the matter of the reliability of the chemical monitoring system based on the modern control and monitoring devices

    NASA Astrophysics Data System (ADS)

    Andriushin, A. V.; Dolbikova, N. S.; Kiet, S. V.; Merzlikina, E. I.; Nikitina, I. S.

    2017-11-01

    The reliability of the main equipment of any power station depends on the correct water chemistry. In order to provide it, it is necessary to monitor the heat carrier quality, which, in its turn, is provided by the chemical monitoring system. Thus, the monitoring system reliability plays an important part in providing reliability of the main equipment. The monitoring system reliability is determined by the reliability and structure of its hardware and software consisting of sensors, controllers, HMI and so on [1,2]. Workers of a power plant dealing with the measuring equipment must be informed promptly about any breakdowns in the monitoring system, in this case they are able to remove the fault quickly. A computer consultant system for personnel maintaining the sensors and other chemical monitoring equipment can help to notice faults quickly and identify their possible causes. Some technical solutions for such a system are considered in the present paper. The experimental results were obtained on the laboratory and experimental workbench representing a physical model of a part of the chemical monitoring system.

  4. Reliability Quantification of Advanced Stirling Convertor (ASC) Components

    NASA Technical Reports Server (NTRS)

    Shah, Ashwin R.; Korovaichuk, Igor; Zampino, Edward

    2010-01-01

    The Advanced Stirling Convertor, is intended to provide power for an unmanned planetary spacecraft and has an operational life requirement of 17 years. Over this 17 year mission, the ASC must provide power with desired performance and efficiency and require no corrective maintenance. Reliability demonstration testing for the ASC was found to be very limited due to schedule and resource constraints. Reliability demonstration must involve the application of analysis, system and component level testing, and simulation models, taken collectively. Therefore, computer simulation with limited test data verification is a viable approach to assess the reliability of ASC components. This approach is based on physics-of-failure mechanisms and involves the relationship among the design variables based on physics, mechanics, material behavior models, interaction of different components and their respective disciplines such as structures, materials, fluid, thermal, mechanical, electrical, etc. In addition, these models are based on the available test data, which can be updated, and analysis refined as more data and information becomes available. The failure mechanisms and causes of failure are included in the analysis, especially in light of the new information, in order to develop guidelines to improve design reliability and better operating controls to reduce the probability of failure. Quantified reliability assessment based on fundamental physical behavior of components and their relationship with other components has demonstrated itself to be a superior technique to conventional reliability approaches based on utilizing failure rates derived from similar equipment or simply expert judgment.

  5. Regulation of transmission line capacity and reliability in electric networks

    NASA Astrophysics Data System (ADS)

    Celebi, Metin

    This thesis is composed of two essays that analyze the incentives and optimal regulation of a monopolist line owner in providing capacity and reliability. Similar analyses in the economic literature resulted in under-investment by an unregulated line owner when line reliability was treated as an exogenous variable. However, reliability should be chosen on the basis of economic principles as well, taking into account not only engineering principles but also the preferences of electricity users. When reliability is treated as a choice variable, both over- and under-investment by the line owner becomes possible. The result depends on the cross-cost elasticity of line construction and on the interval in which the optimal choices of capacity take place. We present some sufficient conditions that lead to definite results about the incentives of the line owner. We also characterize the optimal regulation of the line owner under incomplete information. Our analysis shows that the existence of a line is justified for the social planner when the reliability of other lines on the network is not too high, or when the marginal cost of generation at the expensive generating plant is high. The expectation of higher demand in the future makes the regulator less likely to build the line if it will be congested and reliability of other lines is high enough. It is always optimal to have a congested line under complete information, but not necessarily under incomplete information.

  6. How reliable are clinical systems in the UK NHS? A study of seven NHS organisations

    PubMed Central

    Franklin, Bryony Dean; Moorthy, Krishna; Cooke, Matthew W; Vincent, Charles

    2012-01-01

    Background It is well known that many healthcare systems have poor reliability; however, the size and pervasiveness of this problem and its impact has not been systematically established in the UK. The authors studied four clinical systems: clinical information in surgical outpatient clinics, prescribing for hospital inpatients, equipment in theatres, and insertion of peripheral intravenous lines. The aim was to describe the nature, extent and variation in reliability of these four systems in a sample of UK hospitals, and to explore the reasons for poor reliability. Methods Seven UK hospital organisations were involved; each system was studied in three of these. The authors took delivery of the systems' intended outputs to be a proxy for the reliability of the system as a whole. For example, for clinical information, 100% reliability was defined as all patients having an agreed list of clinical information available when needed during their appointment. Systems factors were explored using semi-structured interviews with key informants. Common themes across the systems were identified. Results Overall reliability was found to be between 81% and 87% for the systems studied, with significant variation between organisations for some systems: clinical information in outpatient clinics ranged from 73% to 96%; prescribing for hospital inpatients 82–88%; equipment availability in theatres 63–88%; and availability of equipment for insertion of peripheral intravenous lines 80–88%. One in five reliability failures were associated with perceived threats to patient safety. Common factors causing poor reliability included lack of feedback, lack of standardisation, and issues such as access to information out of working hours. Conclusions Reported reliability was low for the four systems studied, with some common factors behind each. However, this hides significant variation between organisations for some processes, suggesting that some organisations have managed to create

  7. URREF Reliability Versus Credibility in Information Fusion

    DTIC Science & Technology

    2013-07-01

    Fusion, Vol. 3, No. 2, December, 2008. [31] E. Blasch, J. Dezert, and P. Valin , “DSMT Applied to Seismic and Acoustic Sensor Fusion,” Proc. IEEE Nat...44] E. Blasch, P. Valin , E. Bossé, “Measures of Effectiveness for High- Level Fusion,” Int. Conference on Information Fusion, 2010. [45] X. Mei, H...and P. Valin , “Information Fusion Measures of Effectiveness (MOE) for Decision Support,” Proc. SPIE 8050, 2011. [49] Y. Zheng, W. Dong, and E

  8. Reliability and validity of quantifying absolute muscle hardness using ultrasound elastography.

    PubMed

    Chino, Kentaro; Akagi, Ryota; Dohi, Michiko; Fukashiro, Senshi; Takahashi, Hideyuki

    2012-01-01

    Muscle hardness is a mechanical property that represents transverse muscle stiffness. A quantitative method that uses ultrasound elastography for quantifying absolute human muscle hardness has been previously devised; however, its reliability and validity have not been completely verified. This study aimed to verify the reliability and validity of this quantitative method. The Young's moduli of seven tissue-mimicking materials (in vitro; Young's modulus range, 20-80 kPa; increments of 10 kPa) and the human medial gastrocnemius muscle (in vivo) were quantified using ultrasound elastography. On the basis of the strain/Young's modulus ratio of two reference materials, one hard and one soft (Young's moduli of 7 and 30 kPa, respectively), the Young's moduli of the tissue-mimicking materials and medial gastrocnemius muscle were calculated. The intra- and inter-investigator reliability of the method was confirmed on the basis of acceptably low coefficient of variations (≤6.9%) and substantially high intraclass correlation coefficients (≥0.77) obtained from all measurements. The correlation coefficient between the Young's moduli of the tissue-mimicking materials obtained using a mechanical method and ultrasound elastography was 0.996, which was equivalent to values previously obtained using magnetic resonance elastography. The Young's moduli of the medial gastrocnemius muscle obtained using ultrasound elastography were within the range of values previously obtained using magnetic resonance elastography. The reliability and validity of the quantitative method for measuring absolute muscle hardness using ultrasound elastography were thus verified.

  9. Investigating univariate temporal patterns for intrinsic connectivity networks based on complexity and low-frequency oscillation: a test-retest reliability study.

    PubMed

    Wang, X; Jiao, Y; Tang, T; Wang, H; Lu, Z

    2013-12-19

    Intrinsic connectivity networks (ICNs) are composed of spatial components and time courses. The spatial components of ICNs were discovered with moderate-to-high reliability. So far as we know, few studies focused on the reliability of the temporal patterns for ICNs based their individual time courses. The goals of this study were twofold: to investigate the test-retest reliability of temporal patterns for ICNs, and to analyze these informative univariate metrics. Additionally, a correlation analysis was performed to enhance interpretability. Our study included three datasets: (a) short- and long-term scans, (b) multi-band echo-planar imaging (mEPI), and (c) eyes open or closed. Using dual regression, we obtained the time courses of ICNs for each subject. To produce temporal patterns for ICNs, we applied two categories of univariate metrics: network-wise complexity and network-wise low-frequency oscillation. Furthermore, we validated the test-retest reliability for each metric. The network-wise temporal patterns for most ICNs (especially for default mode network, DMN) exhibited moderate-to-high reliability and reproducibility under different scan conditions. Network-wise complexity for DMN exhibited fair reliability (ICC<0.5) based on eyes-closed sessions. Specially, our results supported that mEPI could be a useful method with high reliability and reproducibility. In addition, these temporal patterns were with physiological meanings, and certain temporal patterns were correlated to the node strength of the corresponding ICN. Overall, network-wise temporal patterns of ICNs were reliable and informative and could be complementary to spatial patterns of ICNs for further study. Copyright © 2013 IBRO. Published by Elsevier Ltd. All rights reserved.

  10. Health Information Obtained From the Internet and Changes in Medical Decision Making: Questionnaire Development and Cross-Sectional Survey.

    PubMed

    Chen, Yen-Yuan; Li, Chia-Ming; Liang, Jyh-Chong; Tsai, Chin-Chung

    2018-02-12

    medical decision making (P=.01), consulting with others (P<.001), and promoting self-efficacy on deliberating the online health information (P<.001) based on the online health information they obtained. Present health care professionals have a responsibility to acknowledge that patients' medical decision making may be changed based on additional online health information. Health care professionals should assist patients' medical decision making by initiating as much dialogue with patients as possible, providing credible and convincing health information to patients, and guiding patients where to look for accurate, comprehensive, and understandable online health information. By doing so, patients will avoid becoming overwhelmed with extraneous and often conflicting health information. Educational interventions to promote health information seekers' ability to identify, locate, obtain, read, understand, evaluate, and effectively use online health information are highly encouraged. ©Yen-Yuan Chen, Chia-Ming Li, Jyh-Chong Liang, Chin-Chung Tsai. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 12.02.2018.

  11. The dream of health information for all

    PubMed Central

    Proaño, Alvaro; Ruiz, Eloy F; Porudominsky, Ruben; Tapia, Jose Carlos

    2016-01-01

    In 2004, an influential report in The Lancet suggested that open health information for all could be achieved by 2015. Unfortunately, this goal has not yet been accomplished. Despite progress in obtaining quality scientific articles in Latin America, it remains difficult to reliably access new and cutting-edge research. As graduating Peruvian medical students, we have confronted many obstacles in obtaining access to quality and up-to-date information and a constant tension between accessing "what is available" rather than "what we need". As we have learned, these limitations affect not only our own education but also the choices we make in the management of our patients. In the following article, we state our point of view regarding limitations in access to scientific articles in Peru and Latin America. PMID:27081475

  12. Achieving Reliable Communication in Dynamic Emergency Responses

    PubMed Central

    Chipara, Octav; Plymoth, Anders N.; Liu, Fang; Huang, Ricky; Evans, Brian; Johansson, Per; Rao, Ramesh; Griswold, William G.

    2011-01-01

    Emergency responses require the coordination of first responders to assess the condition of victims, stabilize their condition, and transport them to hospitals based on the severity of their injuries. WIISARD is a system designed to facilitate the collection of medical information and its reliable dissemination during emergency responses. A key challenge in WIISARD is to deliver data with high reliability as first responders move and operate in a dynamic radio environment fraught with frequent network disconnections. The initial WIISARD system employed a client-server architecture and an ad-hoc routing protocol was used to exchange data. The system had low reliability when deployed during emergency drills. In this paper, we identify the underlying causes of unreliability and propose a novel peer-to-peer architecture that in combination with a gossip-based communication protocol achieves high reliability. Empirical studies show that compared to the initial WIISARD system, the redesigned system improves reliability by as much as 37% while reducing the number of transmitted packets by 23%. PMID:22195075

  13. Internet access and utilization for health information among university students in Islamabad.

    PubMed

    Shaikh, Irshad Ali; Shaikh, Masood Ali; Kamal, Anila; Masood, Sobia

    2008-01-01

    Internet has changed the way we live and work. Advent of this technology has fundamentally transformed our lives the way invention of automobile changed how our lives and cities looked and worked before. Practically no information is available on the use of Internet for health by the people of Pakistan. The Objectives of the study were to assess the access and utilization pattern of Internet by university students in Islamabad, with emphasis on the healthcare information seeking. An anonymous, self-administered, and pre-tested questionnaire with questions on the access, and usage pattern of Internet, seeking health care information online, and belief about reliability of such information; was distributed to only those students who were enrolled in masters or higher degree programs. A total of 600 students were approached and 598 (99.7%) completed the questionnaires. The mean age of students was 23.5 years (range 19-40). The majority of students (423) were enrolled in masters program. Four hundred and sixty-eight students (78.26%) students had access to the computer either at home or at their university hostel. While 304 (50.84%) students had Internet access at home or in their university hostel. Out of 304 students who reported having access to Internet in the past three months, one hundred and thirty-nine (43.4%) students replied affirmatively to the question of having used Internet for seeking health care information. And 109 (78.4%) thought that such information was reliable. Out of 139 students who had used Internet for seeking health information, 35 (25.2%) students replied affirmatively to the question of having discussed health information obtained from Internet with their doctor/physician whom they visited for any illness/treatment. Majority of Islamabad university students in this study had access to computer and Internet. Young and healthy state of this educated age group perhaps accounts for limited use of Internet for seeking healthcare related

  14. Spatial Correlations in Natural Scenes Modulate Response Reliability in Mouse Visual Cortex

    PubMed Central

    Rikhye, Rajeev V.

    2015-01-01

    Intrinsic neuronal variability significantly limits information encoding in the primary visual cortex (V1). Certain stimuli can suppress this intertrial variability to increase the reliability of neuronal responses. In particular, responses to natural scenes, which have broadband spatiotemporal statistics, are more reliable than responses to stimuli such as gratings. However, very little is known about which stimulus statistics modulate reliable coding and how this occurs at the neural ensemble level. Here, we sought to elucidate the role that spatial correlations in natural scenes play in reliable coding. We developed a novel noise-masking method to systematically alter spatial correlations in natural movies, without altering their edge structure. Using high-speed two-photon calcium imaging in vivo, we found that responses in mouse V1 were much less reliable at both the single neuron and population level when spatial correlations were removed from the image. This change in reliability was due to a reorganization of between-neuron correlations. Strongly correlated neurons formed ensembles that reliably and accurately encoded visual stimuli, whereas reducing spatial correlations reduced the activation of these ensembles, leading to an unreliable code. Together with an ensemble-specific normalization model, these results suggest that the coordinated activation of specific subsets of neurons underlies the reliable coding of natural scenes. SIGNIFICANCE STATEMENT The natural environment is rich with information. To process this information with high fidelity, V1 neurons have to be robust to noise and, consequentially, must generate responses that are reliable from trial to trial. While several studies have hinted that both stimulus attributes and population coding may reduce noise, the details remain unclear. Specifically, what features of natural scenes are important and how do they modulate reliability? This study is the first to investigate the role of spatial

  15. Interrelation Between Safety Factors and Reliability

    NASA Technical Reports Server (NTRS)

    Elishakoff, Isaac; Chamis, Christos C. (Technical Monitor)

    2001-01-01

    An evaluation was performed to establish relationships between safety factors and reliability relationships. Results obtained show that the use of the safety factor is not contradictory to the employment of the probabilistic methods. In many cases the safety factors can be directly expressed by the required reliability levels. However, there is a major difference that must be emphasized: whereas the safety factors are allocated in an ad hoc manner, the probabilistic approach offers a unified mathematical framework. The establishment of the interrelation between the concepts opens an avenue to specify safety factors based on reliability. In cases where there are several forms of failure, then the allocation of safety factors should he based on having the same reliability associated with each failure mode. This immediately suggests that by the probabilistic methods the existing over-design or under-design can be eliminated. The report includes three parts: Part 1-Random Actual Stress and Deterministic Yield Stress; Part 2-Deterministic Actual Stress and Random Yield Stress; Part 3-Both Actual Stress and Yield Stress Are Random.

  16. Reliability based design optimization: Formulations and methodologies

    NASA Astrophysics Data System (ADS)

    Agarwal, Harish

    Modern products ranging from simple components to complex systems should be designed to be optimal and reliable. The challenge of modern engineering is to ensure that manufacturing costs are reduced and design cycle times are minimized while achieving requirements for performance and reliability. If the market for the product is competitive, improved quality and reliability can generate very strong competitive advantages. Simulation based design plays an important role in designing almost any kind of automotive, aerospace, and consumer products under these competitive conditions. Single discipline simulations used for analysis are being coupled together to create complex coupled simulation tools. This investigation focuses on the development of efficient and robust methodologies for reliability based design optimization in a simulation based design environment. Original contributions of this research are the development of a novel efficient and robust unilevel methodology for reliability based design optimization, the development of an innovative decoupled reliability based design optimization methodology, the application of homotopy techniques in unilevel reliability based design optimization methodology, and the development of a new framework for reliability based design optimization under epistemic uncertainty. The unilevel methodology for reliability based design optimization is shown to be mathematically equivalent to the traditional nested formulation. Numerical test problems show that the unilevel methodology can reduce computational cost by at least 50% as compared to the nested approach. The decoupled reliability based design optimization methodology is an approximate technique to obtain consistent reliable designs at lesser computational expense. Test problems show that the methodology is computationally efficient compared to the nested approach. A framework for performing reliability based design optimization under epistemic uncertainty is also developed

  17. The system of technical diagnostics of the industrial safety information network

    NASA Astrophysics Data System (ADS)

    Repp, P. V.

    2017-01-01

    This research is devoted to problems of safety of the industrial information network. Basic sub-networks, ensuring reliable operation of the elements of the industrial Automatic Process Control System, were identified. The core tasks of technical diagnostics of industrial information safety were presented. The structure of the technical diagnostics system of the information safety was proposed. It includes two parts: a generator of cyber-attacks and the virtual model of the enterprise information network. The virtual model was obtained by scanning a real enterprise network. A new classification of cyber-attacks was proposed. This classification enables one to design an efficient generator of cyber-attacks sets for testing the virtual modes of the industrial information network. The numerical method of the Monte Carlo (with LPτ - sequences of Sobol), and Markov chain was considered as the design method for the cyber-attacks generation algorithm. The proposed system also includes a diagnostic analyzer, performing expert functions. As an integrative quantitative indicator of the network reliability the stability factor (Kstab) was selected. This factor is determined by the weight of sets of cyber-attacks, identifying the vulnerability of the network. The weight depends on the frequency and complexity of cyber-attacks, the degree of damage, complexity of remediation. The proposed Kstab is an effective integral quantitative measure of the information network reliability.

  18. Reliability measures in item response theory: manifest versus latent correlation functions.

    PubMed

    Milanzi, Elasma; Molenberghs, Geert; Alonso, Ariel; Verbeke, Geert; De Boeck, Paul

    2015-02-01

    For item response theory (IRT) models, which belong to the class of generalized linear or non-linear mixed models, reliability at the scale of observed scores (i.e., manifest correlation) is more difficult to calculate than latent correlation based reliability, but usually of greater scientific interest. This is not least because it cannot be calculated explicitly when the logit link is used in conjunction with normal random effects. As such, approximations such as Fisher's information coefficient, Cronbach's α, or the latent correlation are calculated, allegedly because it is easy to do so. Cronbach's α has well-known and serious drawbacks, Fisher's information is not meaningful under certain circumstances, and there is an important but often overlooked difference between latent and manifest correlations. Here, manifest correlation refers to correlation between observed scores, while latent correlation refers to correlation between scores at the latent (e.g., logit or probit) scale. Thus, using one in place of the other can lead to erroneous conclusions. Taylor series based reliability measures, which are based on manifest correlation functions, are derived and a careful comparison of reliability measures based on latent correlations, Fisher's information, and exact reliability is carried out. The latent correlations are virtually always considerably higher than their manifest counterparts, Fisher's information measure shows no coherent behaviour (it is even negative in some cases), while the newly introduced Taylor series based approximations reflect the exact reliability very closely. Comparisons among the various types of correlations, for various IRT models, are made using algebraic expressions, Monte Carlo simulations, and data analysis. Given the light computational burden and the performance of Taylor series based reliability measures, their use is recommended. © 2014 The British Psychological Society.

  19. Reliability-Based Design Optimization of a Composite Airframe Component

    NASA Technical Reports Server (NTRS)

    Patnaik, Surya N.; Pai, Shantaram S.; Coroneos, Rula M.

    2009-01-01

    A stochastic design optimization methodology (SDO) has been developed to design components of an airframe structure that can be made of metallic and composite materials. The design is obtained as a function of the risk level, or reliability, p. The design method treats uncertainties in load, strength, and material properties as distribution functions, which are defined with mean values and standard deviations. A design constraint or a failure mode is specified as a function of reliability p. Solution to stochastic optimization yields the weight of a structure as a function of reliability p. Optimum weight versus reliability p traced out an inverted-S-shaped graph. The center of the inverted-S graph corresponded to 50 percent (p = 0.5) probability of success. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure that corresponds to unity for reliability p (or p = 1). Weight can be reduced to a small value for the most failure-prone design with a reliability that approaches zero (p = 0). Reliability can be changed for different components of an airframe structure. For example, the landing gear can be designed for a very high reliability, whereas it can be reduced to a small extent for a raked wingtip. The SDO capability is obtained by combining three codes: (1) The MSC/Nastran code was the deterministic analysis tool, (2) The fast probabilistic integrator, or the FPI module of the NESSUS software, was the probabilistic calculator, and (3) NASA Glenn Research Center s optimization testbed CometBoards became the optimizer. The SDO capability requires a finite element structural model, a material model, a load model, and a design model. The stochastic optimization concept is illustrated considering an academic example and a real-life raked wingtip structure of the Boeing 767-400 extended range airliner made of metallic and composite materials.

  20. [Intra-rater Reliability for the Questionnaire on Activity Limitations and Participation Restrictions of Children With ADHD].

    PubMed

    Salamanca Duque, Luisa Matilde; Naranjo Aristizábal, María Mercedes; Gutiérrez Ríos, Gladys Helena; Prieto, Jaime Bayona

    2014-03-01

    Questionnaires for evaluating activity limitations and participation restrictions in children with ADHD (CLARP-TDAH) has recently been developed in Colombia, based on the suggestions made by the WHO from the International Classification of Functioning, Disability and Health (ICF), allowing clinical evaluation beyond an evaluation of the functionality and functioning of children in their family and school environments. Previous research with the questionnaire proved useful in the multidisciplinary approach of Colombian children with ADHD. This study determines the level of intra-rater reliability for questionnaires CLARP-TDAH Parents and Teachers. The study included a non-random sample of 203 Colombian children attending school and diagnosed with ADHD. Intra-rater reliability and the reproducibility of the results was determined using the Kappa index. The informants were parents and teachers. Kappa values >0.7 were obtained for the intra-rater reliability of the questionnaire domains of CLARP-TDAH Parents, while for CLARP-TDAH Teachers domains these values were >0.8. CLARP-TDAH questionnaires are a tool with a good level of intra-rater reliability, which allows a reliable assessment of activity limitations and participation restrictions in order to determine the level of functioning at home and school. Copyright © 2014 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

  1. Simplest chronoscope. III. Further comparisons between reaction times obtained by meterstick versus machine.

    PubMed

    Montare, Alberto

    2013-06-01

    The three classical Donders' reaction time (RT) tasks (simple, choice, and discriminative RTs) were employed to compare reaction time scores from college students obtained by use of Montare's simplest chronoscope (meterstick) methodology to scores obtained by use of a digital-readout multi-choice reaction timer (machine). Five hypotheses were tested. Simple RT, choice RT, and discriminative RT were faster when obtained by meterstick than by machine. The meterstick method showed higher reliability than the machine method and was less variable. The meterstick method of the simplest chronoscope may help to alleviate the longstanding problems of low reliability and high variability of reaction time performances; while at the same time producing faster performance on Donders' simple, choice and discriminative RT tasks than the machine method.

  2. Interformat reliability of digital psychiatric self-report questionnaires: a systematic review.

    PubMed

    Alfonsson, Sven; Maathz, Pernilla; Hursti, Timo

    2014-12-03

    Research on Internet-based interventions typically use digital versions of pen and paper self-report symptom scales. However, adaptation into the digital format could affect the psychometric properties of established self-report scales. Several studies have investigated differences between digital and pen and paper versions of instruments, but no systematic review of the results has yet been done. This review aims to assess the interformat reliability of self-report symptom scales used in digital or online psychotherapy research. Three databases (MEDLINE, Embase, and PsycINFO) were systematically reviewed for studies investigating the reliability between digital and pen and paper versions of psychiatric symptom scales. From a total of 1504 publications, 33 were included in the review, and interformat reliability of 40 different symptom scales was assessed. Significant differences in mean total scores between formats were found in 10 of 62 analyses. These differences were found in just a few studies, which indicates that the results were due to study effects and sample effects rather than unreliable instruments. The interformat reliability ranged from r=.35 to r=.99; however, the majority of instruments showed a strong correlation between format scores. The quality of the included studies varied, and several studies had insufficient power to detect small differences between formats. When digital versions of self-report symptom scales are compared to pen and paper versions, most scales show high interformat reliability. This supports the reliability of results obtained in psychotherapy research on the Internet and the comparability of the results to traditional psychotherapy research. There are, however, some instruments that consistently show low interformat reliability, suggesting that these conclusions cannot be generalized to all questionnaires. Most studies had at least some methodological issues with insufficient statistical power being the most common issue

  3. Wikipedia : its reliability and social role

    NASA Astrophysics Data System (ADS)

    Kusaka, Kyuhachi

    This article discusses Japanese Wikipedia's reliability and its social role as a free, collaborative, multilingual Internet encyclopedia supported by the non-profit Wikimedia Foundation. Japanese Wikipedia's reliability is explained from several surveys. The central concern is how the nature of encyclopedia and Wikipedia affects the quality of Wikipedia's articles. Wikipedia's core content policies such as verifiability, no original research and a neutral point of view will make articles better. But incomplete or poorly written first drafts exist because Wikipedia is a work in progress. The article also argues that social role of online encyclopedia which provides knowledge for all. Knowledge-based society or/and advanced information society require public understanding of science and other expertise. Online encyclopedia attributed to a reliable, published source using an inline citation will guide anyone to specialized knowledge.

  4. Quality of Web Information About Palliative Care on Websites from the United States and Japan: Comparative Evaluation Study

    PubMed Central

    Tanabe, Kouichi; Fujiwara, Kaho; Ogura, Hana; Yasuda, Hatsuna; Goto, Nobuyuki

    2018-01-01

    Background Patients and their families are able to obtain information about palliative care from websites easily nowadays. However, there are concerns on the accuracy of information on the Web and how up to date it is. Objective The objective of this study was to elucidate problematic points of medical information about palliative care obtained from websites, and to compare the quality of the information between Japanese and US websites. Methods We searched Google Japan and Google USA for websites relating to palliative care. We then evaluated the top 50 websites from each search using the DISCERN and LIDA instruments. Results We found that Japanese websites were given a lower evaluation of reliability than US websites. In 3 LIDA instrument subcategories—engagability (P<.001), currency (P=.001), and content production procedure (P<.001)—US websites scored significantly higher and had large effect sizes. Conclusions Our results suggest that Japanese websites have problems with the frequency with which they are updated, their update procedures and policies, and the scrutiny process the evidence must undergo. Additionally, there was a weak association between search ranking and reliability, and simultaneously we found that reliability could not be assessed by search ranking alone. PMID:29615388

  5. How the public uses social media wechat to obtain health information in china: a survey study.

    PubMed

    Zhang, Xingting; Wen, Dong; Liang, Jun; Lei, Jianbo

    2017-07-05

    On average, 570 million users, 93% in China's first-tier cities, log on to WeChat every day. WeChat has become the most widely and frequently used social media in China, and has been profoundly integrated into the daily life of many Chinese people. A variety of health-related information may be found on WeChat. The objective of this study is to understand how the general public views the impact of the rapidly emerging social media on health information acquisition. A self-administered questionnaire was designed, distributed, collected, and analyzed utilizing the online survey tool Sojump. WeChat was adopted to randomly release the questionnaires using convenience sampling and collect the results after a certain amount of time. (1) A total of 1636 questionnaires (WeChat customers) were collected from 32 provinces. (2) The primary means by which respondents received health education was via the Internet (71.79%). Baidu and WeChat were the top 2 search tools utilized (90.71% and 28.30%, respectively). Only 12.41% of respondents were satisfied with their online health information search. (3) Almost all had seen (98.35%) or read (97.68%) health information; however, only 14.43% believed that WeChat health information could improve health. Nearly one-third frequently received and read health information through WeChat. WeChat was selected (63.26%) as the most expected means for obtaining health information. (4) The major concerns regarding health information through WeChat included the following: excessively homogeneous information, the lack of a guarantee of professionalism, and the presence of advertisements. (5) Finally, the general public was most interested in individualized and interactive health information by managing clinicians, they will highly benefit from using social media rather than Internet search tools. The current state of health acquisition proves worrisome. The public has a high chance to access health information via WeChat. The growing popularity of

  6. Circumferential finger measurements utilizing a torque meter to increase reliability.

    PubMed

    King, T I

    1993-01-01

    The purpose of this study was to compare the reliabilities of two methods of measuring finger circumference. Traditionally, finger circumference is determined clinically by the use of a tape measure. In this study, a tape-measure device for recording finger circumference utilizing a torque meter was compared with the traditional method to determine reliability differences. Ninety-two occupational therapists and occupational therapy students obtained circumferential measurements of the author's left index finger at the middle of the proximal phalanx utilizing the two methods. The readings obtained for each method were analyzed to determine the coefficient of variation and to compare their variances. The coefficient of variation for the traditional method was 2.92 and for the device utilizing the torque meter was 0.75. The F ratio was 15.63, which is significant at the 0.01 level. The results of this study indicate greater interrater reliability using a device that can accurately measure torque and allow the therapist to control the amount of tension applied when obtaining circumferential measurements using a tape measure.

  7. The challenge of obtaining information necessary for multi-criteria decision analysis implementation: the case of physiotherapy services in Canada

    PubMed Central

    2013-01-01

    Background As fiscal constraints dominate health policy discussions across Canada and globally, priority-setting exercises are becoming more common to guide the difficult choices that must be made. In this context, it becomes highly desirable to have accurate estimates of the value of specific health care interventions. Economic evaluation is a well-accepted method to estimate the value of health care interventions. However, economic evaluation has significant limitations, which have lead to an increase in the use of Multi-Criteria Decision Analysis (MCDA). One key concern with MCDA is the availability of the information necessary for implementation. In the Fall 2011, the Canadian Physiotherapy Association embarked on a project aimed at providing a valuation of physiotherapy services that is both evidence-based and relevant to resource allocation decisions. The framework selected for this project was MCDA. We report on how we addressed the challenge of obtaining some of the information necessary for MCDA implementation. Methods MCDA criteria were selected and areas of physiotherapy practices were identified. The building up of the necessary information base was a three step process. First, there was a literature review for each practice area, on each criterion. The next step was to conduct interviews with experts in each of the practice areas to critique the results of the literature review and to fill in gaps where there was no or insufficient literature. Finally, the results of the individual interviews were validated by a national committee to ensure consistency across all practice areas and that a national level perspective is applied. Results Despite a lack of research evidence on many of the considerations relevant to the estimation of the value of physiotherapy services (the criteria), sufficient information was obtained to facilitate MCDA implementation at the local level. Conclusions The results of this research project serve two purposes: 1) a method to

  8. Nanoscale deformation measurements for reliability assessment of material interfaces

    NASA Astrophysics Data System (ADS)

    Keller, Jürgen; Gollhardt, Astrid; Vogel, Dietmar; Michel, Bernd

    2006-03-01

    With the development and application of micro/nano electronic mechanical systems (MEMS, NEMS) for a variety of market segments new reliability issues will arise. The understanding of material interfaces is the key for a successful design for reliability of MEMS/NEMS and sensor systems. Furthermore in the field of BIOMEMS newly developed advanced materials and well known engineering materials are combined despite of fully developed reliability concepts for such devices and components. In addition the increasing interface-to volume ratio in highly integrated systems and nanoparticle filled materials are challenges for experimental reliability evaluation. New strategies for reliability assessment on the submicron scale are essential to fulfil the needs of future devices. In this paper a nanoscale resolution experimental method for the measurement of thermo-mechanical deformation at material interfaces is introduced. The determination of displacement fields is based on scanning probe microscopy (SPM) data. In-situ SPM scans of the analyzed object (i.e. material interface) are carried out at different thermo-mechanical load states. The obtained images are compared by grayscale cross correlation algorithms. This allows the tracking of local image patterns of the analyzed surface structure. The measurement results are full-field displacement fields with nanometer resolution. With the obtained data the mixed mode type of loading at material interfaces can be analyzed with highest resolution for future needs in micro system and nanotechnology.

  9. Medical Comics as Tools to Aid in Obtaining Informed Consent for Stroke Care

    PubMed Central

    Furuno, Yuichi; Sasajima, Hiroyasu

    2015-01-01

    Abstract Informed consent has now become common in medical practice. However, a gap still exists between doctors and patients in the understanding of clinical conditions. We designed medical comics about “subarachnoid hemorrhage” and “intracerebral hemorrhage” to help doctors obtain informed consent intuitively, quickly, and comprehensively. Between September 2010 and September 2012, we carried out a questionnaire survey about medical comics with the families of patients who had suffered an intracerebral or subarachnoid hemorrhage. The questionnaire consisted of 6 questions inquiring about their mental condition, reading time, usefulness of the comics in understanding brain function and anatomy, pathogenesis, doctor's explanation, and applicability of these comics. The results showed that 93.8% responders would prefer or strongly prefer the use of comics in other medical situations. When considering the level of understanding of brain function and anatomy, pathology of disease, and doctor's explanation, 81.3%, 75.0%, and 68.8% of responders, respectively, rated these comics as very useful or useful. We think that the visual and narrative illustrations in medical comics would be more helpful for patients than a lengthy explanation by a doctor. Most of the responders hoped that medical comics would be applied to other medical cases. Thus, medical comics could work as a new communication tool between doctors and patients. PMID:26131830

  10. Reliability of the Test of Integrated Language and Literacy Skills (TILLS).

    PubMed

    Mailend, Marja-Liisa; Plante, Elena; Anderson, Michele A; Applegate, E Brooks; Nelson, Nickola W

    2016-07-01

    As new standardized tests become commercially available, it is critical that clinicians have access to the information about a test's psychometric properties, including aspects of reliability. The purpose of the three studies reported in this article was to investigate the reliability of a new test, the Test of Integrated Language and Literacy Skills (TILLS), with consideration of both internal and external sources of measurement error. The TILLS was administered to children aged 6;0-18;11 years. The participants varied in terms of their language and literacy skills and included children with typical language development as well as those diagnosed with language or learning disability. The sample of children also varied in terms of their racial and socioeconomic backgrounds. Study 1 (N = 1056) assessed the internal consistency of TILLS calculating the coefficient omega for each subtest. Study 2 (N = 103) and Study 3 (N = 39) used the intra-class correlation coefficients to report on test-retest and inter-rater reliability respectively. The results indicate strong internal consistency and inter-rater reliability for all subtests of TILLS. The test-retest reliability was strong for all but one subtest, for which the intra-class correlation coefficient was in the acceptable range. This article provides clinicians with essential scientific information that supports the internal and external reliability of a new test of oral and written language skills, the TILLS. Information about reliability is critical for guiding the selection of an appropriate diagnostic tool amongst a number of options. © 2016 Royal College of Speech and Language Therapists.

  11. Evaluating North American Electric Grid Reliability Using the Barabasi-Albert Network Model

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chassin, David P.; Posse, Christian

    2005-09-15

    The reliability of electric transmission systems is examined using a scale-free model of network topology and failure propagation. The topologies of the North American eastern and western electric grids are analyzed to estimate their reliability based on the Barabási-Albert network model. A commonly used power system reliability index is computed using a simple failure propagation model. The results are compared to the values of power system reliability indices previously obtained using other methods and they suggest that scale-free network models are usable to estimate aggregate electric grid reliability.

  12. Evaluating North American Electric Grid Reliability Using the Barabasi-Albert Network Model

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chassin, David P.; Posse, Christian

    2005-09-15

    The reliability of electric transmission systems is examined using a scale-free model of network topology and failure propagation. The topologies of the North American eastern and western electric grids are analyzed to estimate their reliability based on the Barabasi-Albert network model. A commonly used power system reliability index is computed using a simple failure propagation model. The results are compared to the values of power system reliability indices previously obtained using standard power engineering methods, and they suggest that scale-free network models are usable to estimate aggregate electric grid reliability.

  13. The reliable solution and computation time of variable parameters logistic model

    NASA Astrophysics Data System (ADS)

    Wang, Pengfei; Pan, Xinnong

    2018-05-01

    The study investigates the reliable computation time (RCT, termed as T c) by applying a double-precision computation of a variable parameters logistic map (VPLM). Firstly, by using the proposed method, we obtain the reliable solutions for the logistic map. Secondly, we construct 10,000 samples of reliable experiments from a time-dependent non-stationary parameters VPLM and then calculate the mean T c. The results indicate that, for each different initial value, the T cs of the VPLM are generally different. However, the mean T c trends to a constant value when the sample number is large enough. The maximum, minimum, and probable distribution functions of T c are also obtained, which can help us to identify the robustness of applying a nonlinear time series theory to forecasting by using the VPLM output. In addition, the T c of the fixed parameter experiments of the logistic map is obtained, and the results suggest that this T c matches the theoretical formula-predicted value.

  14. A discrete choice experiment to obtain a tariff for valuing informal care situations measured with the CarerQol instrument.

    PubMed

    Hoefman, Renske J; van Exel, Job; Rose, John M; van de Wetering, E J; Brouwer, Werner B F

    2014-01-01

    Economic evaluations adopting a societal perspective need to include informal care whenever relevant. However, in practice, informal care is often neglected, because there are few validated instruments to measure and value informal care for inclusion in economic evaluations. The CarerQol, which is such an instrument, measures the impact of informal care on 7 important burden dimensions (CarerQol-7D) and values this in terms of general quality of life (CarerQol-VAS). The objective of the study was to calculate utility scores based on relative utility weights for the CarerQol-7D. These tariffs will facilitate inclusion of informal care in economic evaluations. The CarerQol-7D tariff was derived with a discrete choice experiment conducted as an Internet survey among the general adult population in the Netherlands (N = 992). The choice set contained 2 unlabeled alternatives described in terms of the 7 CarerQol-7D dimensions (level range: "no,"some," and "a lot"). An efficient experimental design with priors obtained from a pilot study (N = 104) was used. Data were analyzed with a panel mixed multinomial parameter model including main and interaction effects of the attributes. The utility attached to informal care situations was significantly higher when this situation was more attractive in terms of fewer problems and more fulfillment or support. The interaction term between the CarerQol-7D dimensions physical health and mental health problems also significantly explained this utility. The tariff was constructed by adding up the relative utility weights per category of all CarerQol-7D dimensions and the interaction term. We obtained a tariff providing standard utility scores for caring situations described with the CarerQol-7D. This facilitates the inclusion of informal care in economic evaluations.

  15. Reliability and Validity of Quantifying Absolute Muscle Hardness Using Ultrasound Elastography

    PubMed Central

    Chino, Kentaro; Akagi, Ryota; Dohi, Michiko; Fukashiro, Senshi; Takahashi, Hideyuki

    2012-01-01

    Muscle hardness is a mechanical property that represents transverse muscle stiffness. A quantitative method that uses ultrasound elastography for quantifying absolute human muscle hardness has been previously devised; however, its reliability and validity have not been completely verified. This study aimed to verify the reliability and validity of this quantitative method. The Young’s moduli of seven tissue-mimicking materials (in vitro; Young’s modulus range, 20–80 kPa; increments of 10 kPa) and the human medial gastrocnemius muscle (in vivo) were quantified using ultrasound elastography. On the basis of the strain/Young’s modulus ratio of two reference materials, one hard and one soft (Young’s moduli of 7 and 30 kPa, respectively), the Young’s moduli of the tissue-mimicking materials and medial gastrocnemius muscle were calculated. The intra- and inter-investigator reliability of the method was confirmed on the basis of acceptably low coefficient of variations (≤6.9%) and substantially high intraclass correlation coefficients (≥0.77) obtained from all measurements. The correlation coefficient between the Young’s moduli of the tissue-mimicking materials obtained using a mechanical method and ultrasound elastography was 0.996, which was equivalent to values previously obtained using magnetic resonance elastography. The Young’s moduli of the medial gastrocnemius muscle obtained using ultrasound elastography were within the range of values previously obtained using magnetic resonance elastography. The reliability and validity of the quantitative method for measuring absolute muscle hardness using ultrasound elastography were thus verified. PMID:23029231

  16. Success of University Student Volunteers in Obtaining Consent for Reviewing Private Health Information for Emergency Research.

    PubMed

    Kramer, Adam I; Stephenson, Elizabeth; Betel, Adam; Crudden, Johanna; Boutis, Kathy

    2017-01-01

    This study aimed to determine the success of university student volunteers in obtaining consent from parents to allow review of their child's personal health information (PHI) for emergency research screening. This study also aimed to examine the variables associated with successful consent. This was a prospective cross-sectional study conducted at a pediatric emergency department (ED). University students, who functioned as delegates of the health information custodian, approached parents for consent. Of 2,506 parents, 1,852 (73.9%) provided consent to allow review of their child's PHI for research screening. Variables associated with successful consent were high (≥12 months) versus low (<12 months) volunteer experience (OR = 2.0), research related (vs. unrelated) to the child's chief complaint (OR = 2.0), child treated regularly by specialists at the study institution (OR = 1.7), and ED presentation mid-week vs. weekend (OR = 1.7) and morning vs. evening presentation (OR = 1.4). When approached by a university student volunteer, about 25% of parents declined to have their child's PHI reviewed for research screening. This model of obtaining consent may put some emergency research at risk for selection bias. Variables that increase the odds of successful consent can be considered in program design to improve the effectiveness of this model.

  17. Design of high reliability organizations in health care.

    PubMed

    Carroll, J S; Rudolph, J W

    2006-12-01

    To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self-understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self-design for safety and reliability.

  18. Reliability of reported breastfeeding duration among reproductive-aged women from Mexico

    PubMed Central

    Cupul-Uicab, Lea A.; Gladen, Beth C.; Hernández-Ávila, Mauricio; Longnecker, Matthew P.

    2010-01-01

    Breastfed children have lower risk of infectious diseases, post-neonatal mortality and chronic diseases later in life. Because epidemiologic studies usually rely on reported history of previous breastfeeding, data on the accuracy and precision of recalled histories allow improved interpretation of the epidemiologic findings. We evaluated the reliability of two reported breastfeeding durations in 567 reproductive-aged women from Mexico using information obtained from nearly identical sets of questions applied at different times after weaning. We compared differences between reports, and examined the intra-class correlation coefficient (ICC) for any and for exclusive breastfeeding (EBF). Logistic regression was used to evaluate the determinants of poor recall (difference between reports of >20%). The reliability of duration of any breastfeeding was high (ICC 0.94). Overall, differences between reports of duration were usually <1 month, and for 385/567, the difference was ≤0.5 months. Predictors of poorer recall were having ≥4 children, and time between reports of >2 months. The only predictor of better recall was greater age of the baby at weaning. The reliability of EBF duration was lower (ICC 0.49). In this population with a relatively long duration of breastfeeding, reliability of any breast-feeding duration was high. Age, education and previous breastfeeding were not important predictors of recall, in contrast to findings in earlier studies. Consistent with previous reports, however, parity and length of recall were associated with poorer recall of duration of any breastfeeding. Future studies that use reported breastfeeding duration may want to consider the effect of these variables on recall. PMID:19292747

  19. Coefficient Alpha: A Reliability Coefficient for the 21st Century?

    ERIC Educational Resources Information Center

    Yang, Yanyun; Green, Samuel B.

    2011-01-01

    Coefficient alpha is almost universally applied to assess reliability of scales in psychology. We argue that researchers should consider alternatives to coefficient alpha. Our preference is for structural equation modeling (SEM) estimates of reliability because they are informative and allow for an empirical evaluation of the assumptions…

  20. 19 CFR 356.11 - Procedures for obtaining access to privileged information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... information. 356.11 Section 356.11 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE... Government. Where, in the course of a panel review, the panel has reviewed privileged information under a Protective Order for Privileged Information, and the issue to which such information pertains is relevant to...

  1. 19 CFR 356.11 - Procedures for obtaining access to privileged information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... information. 356.11 Section 356.11 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE... Government. Where, in the course of a panel review, the panel has reviewed privileged information under a Protective Order for Privileged Information, and the issue to which such information pertains is relevant to...

  2. 19 CFR 356.11 - Procedures for obtaining access to privileged information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... information. 356.11 Section 356.11 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE... Government. Where, in the course of a panel review, the panel has reviewed privileged information under a Protective Order for Privileged Information, and the issue to which such information pertains is relevant to...

  3. Hierarchical modeling for reliability analysis using Markov models. B.S./M.S. Thesis - MIT

    NASA Technical Reports Server (NTRS)

    Fagundo, Arturo

    1994-01-01

    Markov models represent an extremely attractive tool for the reliability analysis of many systems. However, Markov model state space grows exponentially with the number of components in a given system. Thus, for very large systems Markov modeling techniques alone become intractable in both memory and CPU time. Often a particular subsystem can be found within some larger system where the dependence of the larger system on the subsystem is of a particularly simple form. This simple dependence can be used to decompose such a system into one or more subsystems. A hierarchical technique is presented which can be used to evaluate these subsystems in such a way that their reliabilities can be combined to obtain the reliability for the full system. This hierarchical approach is unique in that it allows the subsystem model to pass multiple aggregate state information to the higher level model, allowing more general systems to be evaluated. Guidelines are developed to assist in the system decomposition. An appropriate method for determining subsystem reliability is also developed. This method gives rise to some interesting numerical issues. Numerical error due to roundoff and integration are discussed at length. Once a decomposition is chosen, the remaining analysis is straightforward but tedious. However, an approach is developed for simplifying the recombination of subsystem reliabilities. Finally, a real world system is used to illustrate the use of this technique in a more practical context.

  4. Current medical staff governance and physician sensemaking: a formula for resistance to high reliability.

    PubMed

    Flitter, Marc A; Riesenmy, Kelly Rouse; van Stralen, Daved

    2012-01-01

    To offer a theoretical explanation for observed physician resistance and rejection of high reliability patient safety initiatives. A grounded theoretical qualitative approach, utilizing the organizational theory of sensemaking, provided the foundation for inductive and deductive reasoning employed to analyze medical staff rejection of two successfully performing high reliability programs at separate hospitals. Physician behaviors resistant to patient-centric high reliability processes were traced to provider-centric physician sensemaking. Research, conducted with the advantage that prospective studies have over the limitations of this retrospective investigation, is needed to evaluate the potential for overcoming physician resistance to innovation implementation, employing strategies based upon these findings and sensemaking theory in general. If hospitals are to emulate high reliability industries that do successfully manage environments of extreme hazard, physicians must be fully integrated into the complex teams required to accomplish this goal. Reforming health care, through high reliability organizing, with its attendant continuous focus on patient-centric processes, offers a distinct alternative to efforts directed primarily at reforming health care insurance. It is by changing how health care is provided that true cost efficiencies can be achieved. Technology and the insights of organizational science present the opportunity of replacing the current emphasis on privileged information with collective tools capable of providing quality and safety in health care. The fictions that have sustained a provider-centric health care system have been challenged. The benefits of patient-centric care should be obtainable.

  5. Use of the Internet by patients and their families to obtain genetics-related information.

    PubMed

    Taylor, M R; Alman, A; Manchester, D K

    2001-08-01

    To characterize use of the Internet by patients and their families referred to general genetics clinics. We developed a survey to assess Internet use among patients visiting urban and rural clinics in Colorado and Wyoming. One hundred eighty-nine surveys were distributed to patients and their family members visiting outpatient general genetics clinics in spring 2000. The 8-page anonymous survey instrument asked about use of the Internet to obtain genetics-related information (GRI). All participants were asked whether a physician or health professional had referred them to the Internet for GRI. Subjects who had previously used the Internet to search for GRI were asked to rate whether they considered the GRI they encountered to be accurate, inaccurate, easy to understand, confusing, or trustworthy. One hundred fifty-seven surveys (83%) were returned (52% urban; 48% rural). Ninety (60%) of 149 respondents were at the clinic for a new-patient visit, and 59 (40%) were follow-up visits. All respondents were older than 17 years; 141 (91%) of 155 respondents were the patient's parent or guardian. Seventy-three (47%) of 155 respondents had searched the Internet for GRI prior to their clinic visit. The patients and families themselves initiated the majority of such efforts; only 8 (5%) of 148 respondents had been referred to a site on the World Wide Web by a physician. Interestingly, 136 (92%) of 147 respondents indicated that they would be likely to visit a Web site that was recommended by a geneticist. The most compelling reasons for searching the Internet for GRI were to get information in layperson's terms (60/131 [46%]); to get information about treatment (16/131 [12%]); and to get information about genetic research (16/131 [12%]). Among respondents who reported visiting GRI Web sites, 24 (41%) of 58 agreed that information was confusing or difficult to understand, 35 (53%) of 66 agreed that information was accurate and trustworthy, and 44 (77%) of 57 agreed that using

  6. A particle swarm model for estimating reliability and scheduling system maintenance

    NASA Astrophysics Data System (ADS)

    Puzis, Rami; Shirtz, Dov; Elovici, Yuval

    2016-05-01

    Modifying data and information system components may introduce new errors and deteriorate the reliability of the system. Reliability can be efficiently regained with reliability centred maintenance, which requires reliability estimation for maintenance scheduling. A variant of the particle swarm model is used to estimate reliability of systems implemented according to the model view controller paradigm. Simulations based on data collected from an online system of a large financial institute are used to compare three component-level maintenance policies. Results show that appropriately scheduled component-level maintenance greatly reduces the cost of upholding an acceptable level of reliability by reducing the need in system-wide maintenance.

  7. Beyond reliability to profitability

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bond, T.H.; Mitchell, J.S.

    1996-07-01

    Reliability concerns have controlled much of power generation design and operations. Emerging from a strictly regulated environment, profitability is becoming a much more important concept for today`s power generation executives. This paper discusses the conceptual advance-view power plant maintenance as a profit center, go beyond reliability, and embrace profitability. Profit Centered Maintenance begins with the premise that financial considerations, namely profitability, drive most aspects of modern process and manufacturing operations. Profit Centered Maintenance is a continuous process of reliability and administrative improvement and optimization. For the power generation executives with troublesome maintenance programs, Profit Centered Maintenance can be the blueprintmore » to increased profitability. It requires the culture change to make decisions based on value, to reengineer the administration of maintenance, and to enable the people performing and administering maintenance to make the most of available maintenance information technology. The key steps are to optimize the physical function of maintenance and to resolve recurring maintenance problems so that the need for maintenance can be reduced. Profit Centered Maintenance is more than just an attitude it is a path to profitability, be it resulting in increased profits or increased market share.« less

  8. Characterizing reliability in a product/process design-assurance program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kerscher, W.J. III; Booker, J.M.; Bement, T.R.

    1997-10-01

    Over the years many advancing techniques in the area of reliability engineering have surfaced in the military sphere of influence, and one of these techniques is Reliability Growth Testing (RGT). Private industry has reviewed RGT as part of the solution to their reliability concerns, but many practical considerations have slowed its implementation. It`s objective is to demonstrate the reliability requirement of a new product with a specified confidence. This paper speaks directly to that objective but discusses a somewhat different approach to achieving it. Rather than conducting testing as a continuum and developing statistical confidence bands around the results, thismore » Bayesian updating approach starts with a reliability estimate characterized by large uncertainty and then proceeds to reduce the uncertainty by folding in fresh information in a Bayesian framework.« less

  9. Design of surface-water data networks for regional information

    USGS Publications Warehouse

    Moss, Marshall E.; Gilroy, E.J.; Tasker, Gary D.; Karlinger, M.R.

    1982-01-01

    This report describes a technique, Network Analysis of Regional Information (NARI), and the existing computer procedures that have been developed for the specification of the regional information-cost relation for several statistical parameters of streamflow. The measure of information used is the true standard error of estimate of a regional logarithmic regression. The cost is a function of the number of stations at which hydrologic data are collected and the number of years for which the data are collected. The technique can be used to obtain either (1) a minimum cost network that will attain a prespecified accuracy and reliability or (2) a network that maximizes information given a set of budgetary and time constraints.

  10. The reliability of in-training assessment when performance improvement is taken into account.

    PubMed

    van Lohuizen, Mirjam T; Kuks, Jan B M; van Hell, Elisabeth A; Raat, A N; Stewart, Roy E; Cohen-Schotanus, Janke

    2010-12-01

    During in-training assessment students are frequently assessed over a longer period of time and therefore it can be expected that their performance will improve. We studied whether there really is a measurable performance improvement when students are assessed over an extended period of time and how this improvement affects the reliability of the overall judgement. In-training assessment results were obtained from 104 students on rotation at our university hospital or at one of the six affiliated hospitals. Generalisability theory was used in combination with multilevel analysis to obtain reliability coefficients and to estimate the number of assessments needed for reliable overall judgement, both including and excluding performance improvement. Students' clinical performance ratings improved significantly from a mean of 7.6 at the start to a mean of 7.8 at the end of their clerkship. When taking performance improvement into account, reliability coefficients were higher. The number of assessments needed to achieve a reliability of 0.80 or higher decreased from 17 to 11. Therefore, when studying reliability of in-training assessment, performance improvement should be considered.

  11. Alberta infant motor scale: reliability and validity when used on preterm infants in Taiwan.

    PubMed

    Jeng, S F; Yau, K I; Chen, L C; Hsiao, S F

    2000-02-01

    The goal of this study was to examine the reliability and validity of measurements obtained with the Alberta Infant Motor Scale (AIMS) for evaluation of preterm infants in Taiwan. Two independent groups of preterm infants were used to investigate the reliability (n=45) and validity (n=41) for the AIMS. In the reliability study, the AIMS was administered to the infants by a physical therapist, and infant performance was videotaped. The performance was then rescored by the same therapist and by 2 other therapists to examine the intrarater and interrater reliability. In the validity study, the AIMS and the Bayley Motor Scale were administered to the infants at 6 and 12 months of age to examine criterion-related validity. Intraclass correlation coefficients (ICCs) for intrarater and interrater reliability of measurements obtained with the AIMS were high (ICC=.97-.99). The AIMS scores correlated with the Bayley Motor Scale scores at 6 and 12 months (r=.78 and.90), although the AIMS scores at 6 months were only moderately predictive of the motor function at 12 months (r=.56). The results suggest that measurements obtained with the AIMS have acceptable reliability and concurrent validity but limited predictive value for evaluating preterm Taiwanese infants.

  12. Using the Patient Reported Outcomes Measurement Information System to Evaluate Psychosocial Functioning among Children with Craniofacial Anomalies.

    PubMed

    Shapiro, Danielle N; Waljee, Jennifer; Ranganathan, Kavitha; Buchman, Steven; Warschausky, Seth

    2015-06-01

    Children with craniofacial anomalies are at risk for social exclusion, bullying, and psychological symptoms, all of which are associated with poor developmental and health outcomes. The National Institutes of Health-developed Patient Reported Outcomes Measurement Information System instruments may be useful tools for monitoring psychosocial functioning in clinical settings and for integrating patient and parent perspectives. The current study included 74 children (50 percent male) with craniofacial anomalies recruited through a multidisciplinary clinic. The authors obtained child self-report and parent-proxy ratings of depression, anxiety, and peer relationship quality using National Institutes of Health Patient Reported Outcomes Measurement Information System instruments. The authors compared sample means to Patient Reported Outcomes Measurement Information System instruments norms and analyzed the reliability of parents' and children's reporting of psychosocial variables. All reliability statistics were satisfactory (α values ranging from 0.74 to 0.96) and sample standard deviations were similar to those obtained in a general population, suggesting that Patient Reported Outcomes Measurement Information System instruments are reliable among children with craniofacial anomalies. In general, children and parents did not report unusual levels of psychological distress; however, they did report poorer peer relationship quality relative to normed data, a trend that was particularly pronounced among boys. National Institutes of Health Patient Reported Outcomes Measurement Information System instruments are efficient and accurate tools for monitoring psychosocial adjustment among children with craniofacial anomalies. It may be especially important to monitor social functioning, particularly among boys.

  13. Design of high reliability organizations in health care

    PubMed Central

    Carroll, J S; Rudolph, J W

    2006-01-01

    To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self‐understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self‐design for safety and reliability. PMID:17142607

  14. A novel evaluation method for building construction project based on integrated information entropy with reliability theory.

    PubMed

    Bai, Xiao-ping; Zhang, Xi-wei

    2013-01-01

    Selecting construction schemes of the building engineering project is a complex multiobjective optimization decision process, in which many indexes need to be selected to find the optimum scheme. Aiming at this problem, this paper selects cost, progress, quality, and safety as the four first-order evaluation indexes, uses the quantitative method for the cost index, uses integrated qualitative and quantitative methodologies for progress, quality, and safety indexes, and integrates engineering economics, reliability theories, and information entropy theory to present a new evaluation method for building construction project. Combined with a practical case, this paper also presents detailed computing processes and steps, including selecting all order indexes, establishing the index matrix, computing score values of all order indexes, computing the synthesis score, sorting all selected schemes, and making analysis and decision. Presented method can offer valuable references for risk computing of building construction projects.

  15. Score Reliability of Adolescent Alcohol Screening Measures: A Meta-Analytic Inquiry

    ERIC Educational Resources Information Center

    Shields, Alan L.; Campfield, Delia C.; Miller, Christopher S.; Howell, Ryan T.; Wallace, Kimberly; Weiss, Roger D.

    2008-01-01

    This study describes the reliability reporting practices in empirical studies using eight adolescent alcohol screening tools and characterizes and explores variability in internal consistency estimates across samples. Of 119 observed administrations of these instruments, 40 (34%) reported usable reliability information. The Personal Experience…

  16. The relationship between cost estimates reliability and BIM adoption: SEM analysis

    NASA Astrophysics Data System (ADS)

    Ismail, N. A. A.; Idris, N. H.; Ramli, H.; Rooshdi, R. R. Raja Muhammad; Sahamir, S. R.

    2018-02-01

    This paper presents the usage of Structural Equation Modelling (SEM) approach in analysing the effects of Building Information Modelling (BIM) technology adoption in improving the reliability of cost estimates. Based on the questionnaire survey results, SEM analysis using SPSS-AMOS application examined the relationships between BIM-improved information and cost estimates reliability factors, leading to BIM technology adoption. Six hypotheses were established prior to SEM analysis employing two types of SEM models, namely the Confirmatory Factor Analysis (CFA) model and full structural model. The SEM models were then validated through the assessment on their uni-dimensionality, validity, reliability, and fitness index, in line with the hypotheses tested. The final SEM model fit measures are: P-value=0.000, RMSEA=0.079<0.08, GFI=0.824, CFI=0.962>0.90, TLI=0.956>0.90, NFI=0.935>0.90 and ChiSq/df=2.259; indicating that the overall index values achieved the required level of model fitness. The model supports all the hypotheses evaluated, confirming that all relationship exists amongst the constructs are positive and significant. Ultimately, the analysis verified that most of the respondents foresee better understanding of project input information through BIM visualization, its reliable database and coordinated data, in developing more reliable cost estimates. They also perceive to accelerate their cost estimating task through BIM adoption.

  17. 7 CFR 4290.620 - Requirements to obtain information from Portfolio Concerns.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... English. (a) Information for initial Financing decision. Before extending any Financing, you must require... financing proceeds), cash flow analyses, projections, and such economic development information about the Enterprise, as are necessary to support your investment decision. The information submitted must be...

  18. Space flight risk data collection and analysis project: Risk and reliability database

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The focus of the NASA 'Space Flight Risk Data Collection and Analysis' project was to acquire and evaluate space flight data with the express purpose of establishing a database containing measurements of specific risk assessment - reliability - availability - maintainability - supportability (RRAMS) parameters. The developed comprehensive RRAMS database will support the performance of future NASA and aerospace industry risk and reliability studies. One of the primary goals has been to acquire unprocessed information relating to the reliability and availability of launch vehicles and the subsystems and components thereof from the 45th Space Wing (formerly Eastern Space and Missile Command -ESMC) at Patrick Air Force Base. After evaluating and analyzing this information, it was encoded in terms of parameters pertinent to ascertaining reliability and availability statistics, and then assembled into an appropriate database structure.

  19. A Reliability Estimation in Modeling Watershed Runoff With Uncertainties

    NASA Astrophysics Data System (ADS)

    Melching, Charles S.; Yen, Ben Chie; Wenzel, Harry G., Jr.

    1990-10-01

    The reliability of simulation results produced by watershed runoff models is a function of uncertainties in nature, data, model parameters, and model structure. A framework is presented here for using a reliability analysis method (such as first-order second-moment techniques or Monte Carlo simulation) to evaluate the combined effect of the uncertainties on the reliability of output hydrographs from hydrologic models. For a given event the prediction reliability can be expressed in terms of the probability distribution of the estimated hydrologic variable. The peak discharge probability for a watershed in Illinois using the HEC-1 watershed model is given as an example. The study of the reliability of predictions from watershed models provides useful information on the stochastic nature of output from deterministic models subject to uncertainties and identifies the relative contribution of the various uncertainties to unreliability of model predictions.

  20. Reliability Generalization (RG) Analysis: The Test Is Not Reliable

    ERIC Educational Resources Information Center

    Warne, Russell

    2008-01-01

    Literature shows that most researchers are unaware of some of the characteristics of reliability. This paper clarifies some misconceptions by describing the procedures, benefits, and limitations of reliability generalization while using it to illustrate the nature of score reliability. Reliability generalization (RG) is a meta-analytic method…

  1. Reliability of the Suicide Opinion Questionnaire.

    ERIC Educational Resources Information Center

    Rogers, James R.; DeShon, Richard P.

    The lack of systematic psychometric information on the Suicide Opinion Questionnaire (SOQ) was addressed by investigating the factor structure and reliability of the eight-factor clinical scale model (mental illness, cry for help, right to die, religion, impulsivity, normality, aggression, and moral evil), developed for interpreting responses to…

  2. Quality of Web Information About Palliative Care on Websites from the United States and Japan: Comparative Evaluation Study.

    PubMed

    Tanabe, Kouichi; Fujiwara, Kaho; Ogura, Hana; Yasuda, Hatsuna; Goto, Nobuyuki; Ohtsu, Fumiko

    2018-04-03

    Patients and their families are able to obtain information about palliative care from websites easily nowadays. However, there are concerns on the accuracy of information on the Web and how up to date it is. The objective of this study was to elucidate problematic points of medical information about palliative care obtained from websites, and to compare the quality of the information between Japanese and US websites. We searched Google Japan and Google USA for websites relating to palliative care. We then evaluated the top 50 websites from each search using the DISCERN and LIDA instruments. We found that Japanese websites were given a lower evaluation of reliability than US websites. In 3 LIDA instrument subcategories-engagability (P<.001), currency (P=.001), and content production procedure (P<.001)-US websites scored significantly higher and had large effect sizes. Our results suggest that Japanese websites have problems with the frequency with which they are updated, their update procedures and policies, and the scrutiny process the evidence must undergo. Additionally, there was a weak association between search ranking and reliability, and simultaneously we found that reliability could not be assessed by search ranking alone. ©Kouichi Tanabe, Kaho Fujiwara, Hana Ogura, Hatsuna Yasuda, Nobuyuki Goto, Fumiko Ohtsu. Originally published in the Interactive Journal of Medical Research (http://www.i-jmr.org/), 03.04.2018.

  3. 75 FR 4374 - North American Electric Reliability Corporation; Notice of Filing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-27

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM06-22-011] North American Electric Reliability Corporation; Notice of Filing January 20, 2010. Take notice that on January 19, 2010, North American Electric Reliability Corporation (NERC) filed additional information that will allow the...

  4. Accuracy and reliability of observational gait analysis data: judgments of push-off in gait after stroke.

    PubMed

    McGinley, Jennifer L; Goldie, Patricia A; Greenwood, Kenneth M; Olney, Sandra J

    2003-02-01

    Physical therapists routinely observe gait in clinical practice. The purpose of this study was to determine the accuracy and reliability of observational assessments of push-off in gait after stroke. Eighteen physical therapists and 11 subjects with hemiplegia following a stroke participated in the study. Measurements of ankle power generation were obtained from subjects following stroke using a gait analysis system. Concurrent videotaped gait performances were observed by the physical therapists on 2 occasions. Ankle power generation at push-off was scored as either normal or abnormal using two 11-point rating scales. These observational ratings were correlated with the measurements of peak ankle power generation. A high correlation was obtained between the observational ratings and the measurements of ankle power generation (mean Pearson r=.84). Interobserver reliability was moderately high (mean intraclass correlation coefficient [ICC (2,1)]=.76). Intraobserver reliability also was high, with a mean ICC (2,1) of.89 obtained. Physical therapists were able to make accurate and reliable judgments of push-off in videotaped gait of subjects following stroke using observational assessment. Further research is indicated to explore the accuracy and reliability of data obtained with observational gait analysis as it occurs in clinical practice.

  5. Automated reliability assessment for spectroscopic redshift measurements

    NASA Astrophysics Data System (ADS)

    Jamal, S.; Le Brun, V.; Le Fèvre, O.; Vibert, D.; Schmitt, A.; Surace, C.; Copin, Y.; Garilli, B.; Moresco, M.; Pozzetti, L.

    2018-03-01

    Context. Future large-scale surveys, such as the ESA Euclid mission, will produce a large set of galaxy redshifts (≥106) that will require fully automated data-processing pipelines to analyze the data, extract crucial information and ensure that all requirements are met. A fundamental element in these pipelines is to associate to each galaxy redshift measurement a quality, or reliability, estimate. Aim. In this work, we introduce a new approach to automate the spectroscopic redshift reliability assessment based on machine learning (ML) and characteristics of the redshift probability density function. Methods: We propose to rephrase the spectroscopic redshift estimation into a Bayesian framework, in order to incorporate all sources of information and uncertainties related to the redshift estimation process and produce a redshift posterior probability density function (PDF). To automate the assessment of a reliability flag, we exploit key features in the redshift posterior PDF and machine learning algorithms. Results: As a working example, public data from the VIMOS VLT Deep Survey is exploited to present and test this new methodology. We first tried to reproduce the existing reliability flags using supervised classification in order to describe different types of redshift PDFs, but due to the subjective definition of these flags (classification accuracy 58%), we soon opted for a new homogeneous partitioning of the data into distinct clusters via unsupervised classification. After assessing the accuracy of the new clusters via resubstitution and test predictions (classification accuracy 98%), we projected unlabeled data from preliminary mock simulations for the Euclid space mission into this mapping to predict their redshift reliability labels. Conclusions: Through the development of a methodology in which a system can build its own experience to assess the quality of a parameter, we are able to set a preliminary basis of an automated reliability assessment for

  6. Validity and reliability of a new ankle dorsiflexion measurement device.

    PubMed

    Gatt, Alfred; Chockalingam, Nachiappan

    2013-08-01

    The assessment of the maximum ankle dorsiflexion angle is an important clinical examination procedure. Evidence shows that the traditional goniometer is highly unreliable, and various designs of goniometers to measure the maximum ankle dorsiflexion angle rely on the application of a known force to obtain reliable results. Hence, an innovative ankle dorsiflexion measurement device was designed to make this measurement more reliable by holding the foot in a selected posture without the application of a known moment. To report on the comprehensive validity and reliability testing carried out on the new device. Following validity testing, four different trials to test reliability of the ankle dorsiflexion measurement device were performed. These trials included inter-rater and intra-rater testings with a controlled moment, intra-rater reliability testing with knees flexed and extended without a controlled moment, intra-rater testing with a patient population, and inter-rater reliability testing between four raters of varying experience without controlling moment. All raters were blinded. A series of trials to test intra-rater and inter-rater reliabilities. Intra-rater reliability intraclass correlation coefficient was 0.98 and inter-rater reliability intraclass correlation coefficient (2,1) was 0.953 with a controlled moment. With uncontrolled moment, very high reliability for intra-tester was also achieved (intraclass correlation coefficient = 0.94 with knees extended and intraclass correlation coefficient = 0.95 with knees flexed). For the trial investigating test-retest reliability with actual patients, intraclass correlation coefficient of 0.99 was obtained. In the trial investigating four different raters with uncontrolled moment, intraclass correlation coefficient of 0.91 was achieved. The new ankle dorsiflexion measurement device is a valid and reliable device for measuring ankle dorsiflexion in both healthy subjects and patients, with both controlled and

  7. Development of a Conservative Model Validation Approach for Reliable Analysis

    DTIC Science & Technology

    2015-01-01

    CIE 2015 August 2-5, 2015, Boston, Massachusetts, USA [DRAFT] DETC2015-46982 DEVELOPMENT OF A CONSERVATIVE MODEL VALIDATION APPROACH FOR RELIABLE...obtain a conservative simulation model for reliable design even with limited experimental data. Very little research has taken into account the...3, the proposed conservative model validation is briefly compared to the conventional model validation approach. Section 4 describes how to account

  8. An integrated approach to system design, reliability, and diagnosis

    NASA Technical Reports Server (NTRS)

    Patterson-Hine, F. A.; Iverson, David L.

    1990-01-01

    The requirement for ultradependability of computer systems in future avionics and space applications necessitates a top-down, integrated systems engineering approach for design, implementation, testing, and operation. The functional analyses of hardware and software systems must be combined by models that are flexible enough to represent their interactions and behavior. The information contained in these models must be accessible throughout all phases of the system life cycle in order to maintain consistency and accuracy in design and operational decisions. One approach being taken by researchers at Ames Research Center is the creation of an object-oriented environment that integrates information about system components required in the reliability evaluation with behavioral information useful for diagnostic algorithms. Procedures have been developed at Ames that perform reliability evaluations during design and failure diagnoses during system operation. These procedures utilize information from a central source, structured as object-oriented fault trees. Fault trees were selected because they are a flexible model widely used in aerospace applications and because they give a concise, structured representation of system behavior. The utility of this integrated environment for aerospace applications in light of our experiences during its development and use is described. The techniques for reliability evaluation and failure diagnosis are discussed, and current extensions of the environment and areas requiring further development are summarized.

  9. An integrated approach to system design, reliability, and diagnosis

    NASA Astrophysics Data System (ADS)

    Patterson-Hine, F. A.; Iverson, David L.

    1990-12-01

    The requirement for ultradependability of computer systems in future avionics and space applications necessitates a top-down, integrated systems engineering approach for design, implementation, testing, and operation. The functional analyses of hardware and software systems must be combined by models that are flexible enough to represent their interactions and behavior. The information contained in these models must be accessible throughout all phases of the system life cycle in order to maintain consistency and accuracy in design and operational decisions. One approach being taken by researchers at Ames Research Center is the creation of an object-oriented environment that integrates information about system components required in the reliability evaluation with behavioral information useful for diagnostic algorithms. Procedures have been developed at Ames that perform reliability evaluations during design and failure diagnoses during system operation. These procedures utilize information from a central source, structured as object-oriented fault trees. Fault trees were selected because they are a flexible model widely used in aerospace applications and because they give a concise, structured representation of system behavior. The utility of this integrated environment for aerospace applications in light of our experiences during its development and use is described. The techniques for reliability evaluation and failure diagnosis are discussed, and current extensions of the environment and areas requiring further development are summarized.

  10. Reliability of the Load-Velocity Relationship Obtained Through Linear and Polynomial Regression Models to Predict the One-Repetition Maximum Load.

    PubMed

    Pestaña-Melero, Francisco Luis; Haff, G Gregory; Rojas, Francisco Javier; Pérez-Castilla, Alejandro; García-Ramos, Amador

    2017-12-18

    This study aimed to compare the between-session reliability of the load-velocity relationship between (1) linear vs. polynomial regression models, (2) concentric-only vs. eccentric-concentric bench press variants, as well as (3) the within-participants vs. the between-participants variability of the velocity attained at each percentage of the one-repetition maximum (%1RM). The load-velocity relationship of 30 men (age: 21.2±3.8 y; height: 1.78±0.07 m, body mass: 72.3±7.3 kg; bench press 1RM: 78.8±13.2 kg) were evaluated by means of linear and polynomial regression models in the concentric-only and eccentric-concentric bench press variants in a Smith Machine. Two sessions were performed with each bench press variant. The main findings were: (1) first-order-polynomials (CV: 4.39%-4.70%) provided the load-velocity relationship with higher reliability than second-order-polynomials (CV: 4.68%-5.04%); (2) the reliability of the load-velocity relationship did not differ between the concentric-only and eccentric-concentric bench press variants; (3) the within-participants variability of the velocity attained at each %1RM was markedly lower than the between-participants variability. Taken together, these results highlight that, regardless of the bench press variant considered, the individual determination of the load-velocity relationship by a linear regression model could be recommended to monitor and prescribe the relative load in the Smith machine bench press exercise.

  11. Reliability of bounce drop jump parameters within elite male rugby players.

    PubMed

    Costley, Lisa; Wallace, Eric; Johnston, Michael; Kennedy, Rodney

    2017-07-25

    The aims of the study were to investigate the number of familiarisation sessions required to establish reliability of the bounce drop jump (BDJ) and subsequent reliability once familiarisation is achieved. Seventeen trained male athletes completed 4 BDJs in 4 separate testing sessions. Force-time data from a 20 cm BDJ was obtained using two force plates (ensuring ground contact < 250 ms). Subjects were instructed to 'jump for maximal height and minimal contact time' while the best and average of four jumps were compared. A series of performance variables were assessed in both eccentric and concentric phases including jump height, contact time, flight time, reactive strength index (RSI), peak power, rate of force development (RFD) and actual dropping height (ADH). Reliability was assessed using the intraclass correlation coefficient (ICC) and coefficient of variation (CV) while familiarisation was assessed using a repeated measures analysis of variance (ANOVA). The majority of DJ parameters exhibited excellent reliability with no systematic bias evident, while the average of 4 trials provided greater reliability. With the exception of vertical stiffness (CV: 12.0 %) and RFD (CV: 16.2 %) all variables demonstrated low within subject variation (CV range: 3.1 - 8.9 %). Relative reliability was very poor for ADH, with heights ranging from 14.87 - 29.85 cm. High levels of reliability can be obtained from the BDJ with the exception of vertical stiffness and RFD, however, extreme caution must be taken when comparing DJ results between individuals and squads due to large discrepancies between actual drop height and platform height.

  12. The reliability of the Australasian Triage Scale: a meta-analysis

    PubMed Central

    Ebrahimi, Mohsen; Heydari, Abbas; Mazlom, Reza; Mirhaghi, Amir

    2015-01-01

    BACKGROUND: Although the Australasian Triage Scale (ATS) has been developed two decades ago, its reliability has not been defined; therefore, we present a meta-analyis of the reliability of the ATS in order to reveal to what extent the ATS is reliable. DATA SOURCES: Electronic databases were searched to March 2014. The included studies were those that reported samples size, reliability coefficients, and adequate description of the ATS reliability assessment. The guidelines for reporting reliability and agreement studies (GRRAS) were used. Two reviewers independently examined abstracts and extracted data. The effect size was obtained by the z-transformation of reliability coefficients. Data were pooled with random-effects models, and meta-regression was done based on the method of moment’s estimator. RESULTS: Six studies were included in this study at last. Pooled coefficient for the ATS was substantial 0.428 (95%CI 0.340–0.509). The rate of mis-triage was less than fifty percent. The agreement upon the adult version is higher than the pediatric version. CONCLUSION: The ATS has shown an acceptable level of overall reliability in the emergency department, but it needs more development to reach an almost perfect agreement. PMID:26056538

  13. National healthcare systems and the need for health information governance.

    PubMed

    Hovenga, Evelyn J S

    2013-01-01

    This chapter gives an overview of health data, information and knowledge governance needs and associated generic principles so that information systems are able to automate such data collections from point-of-care operational systems. Also covered are health information systems' dimensions and known barriers to the delivery of quality health services, including environmental, technology and governance influences of any population's health status within the context of national health systems. This is where health information managers and health informaticians need to resolve the many challenges associated with eHealth implementations where data are assets, efficient information flow is essential, the ability to acquire new knowledge desirable, and where the use of data and information needs to be viewed from a governance perspective to ensure reliable and quality information is obtained to enhance decision making.

  14. Reliability of the nursing care hour measure: a descriptive study.

    PubMed

    Klaus, Susan F; Dunton, Nancy; Gajewski, Byron; Potter, Catima

    2013-07-01

    The nursing care hour has become an international standard unit of measure in research where nurse staffing is a key variable. Until now, there have been no studies verifying whether nursing care hours obtained from hospital data sources can be collected reliably. To examine the processes used by hospitals to generate nursing care hour data and to evaluate inter-rater reliability and guideline compliance with standards of the National Database of Nursing Quality Indicators(®) (NDNQI(®)) and the National Quality Forum. Two-phase descriptive study of all NDNQI hospitals that submitted data in third quarter of 2007. Data for phase I came from an online survey created by the authors to ascertain the processes used by hospitals to collect nursing care hours and their compliance with standardized data collection guidelines. In phase II, inter-rater reliability was measured using intra-class correlations between nursing care hours generated from clock hour files submitted to the study team by participants' payroll/accounting departments and aggregated data submitted previously. Phase I data were obtained from a total of 714 respondents. Nearly half (48%) of all sites use payroll records to obtain nursing care hour data and 70% use one of the standardized methods for converting the bi-weekly hours into months. Unit secretaries were reportedly included in NCH by 17.4% of respondents and only 26.2% of sites could accurately identify the point at which newly hired nurses should be included. The phase II findings (n=11) support the ability of two independent raters to obtain similar results when calculating total nursing care hours according to standard guidelines (ICC=0.76-0.99). Although barriers exist, this study found support for hospitals' abilities to collect reliable nursing care hour data. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Reliability model generator

    NASA Technical Reports Server (NTRS)

    Cohen, Gerald C. (Inventor); McMann, Catherine M. (Inventor)

    1991-01-01

    An improved method and system for automatically generating reliability models for use with a reliability evaluation tool is described. The reliability model generator of the present invention includes means for storing a plurality of low level reliability models which represent the reliability characteristics for low level system components. In addition, the present invention includes means for defining the interconnection of the low level reliability models via a system architecture description. In accordance with the principles of the present invention, a reliability model for the entire system is automatically generated by aggregating the low level reliability models based on the system architecture description.

  16. Reliability, Durability, and Safety | Transportation Research | NREL

    Science.gov Websites

    fill results obtained in different scenarios. The animation serves as a useful tool to help fleet limitations from a performance and reliability perspective. Evaluation results for three different BIMs analysis assists in development and helps end users select and deploy appropriate sensors for different

  17. Reliability model of a monopropellant auxiliary propulsion system

    NASA Technical Reports Server (NTRS)

    Greenberg, J. S.

    1971-01-01

    A mathematical model and associated computer code has been developed which computes the reliability of a monopropellant blowdown hydrazine spacecraft auxiliary propulsion system as a function of time. The propulsion system is used to adjust or modify the spacecraft orbit over an extended period of time. The multiple orbit corrections are the multiple objectives which the auxiliary propulsion system is designed to achieve. Thus the reliability model computes the probability of successfully accomplishing each of the desired orbit corrections. To accomplish this, the reliability model interfaces with a computer code that models the performance of a blowdown (unregulated) monopropellant auxiliary propulsion system. The computer code acts as a performance model and as such gives an accurate time history of the system operating parameters. The basic timing and status information is passed on to and utilized by the reliability model which establishes the probability of successfully accomplishing the orbit corrections.

  18. Reliable Cellular Automata with Self-Organization

    NASA Astrophysics Data System (ADS)

    Gács, Peter

    2001-04-01

    In a probabilistic cellular automaton in which all local transitions have positive probability, the problem of keeping a bit of information indefinitely is nontrivial, even in an infinite automaton. Still, there is a solution in 2 dimensions, and this solution can be used to construct a simple 3-dimensional discrete-time universal fault-tolerant cellular automaton. This technique does not help much to solve the following problems: remembering a bit of information in 1 dimension; computing in dimensions lower than 3; computing in any dimension with non-synchronized transitions. Our more complex technique organizes the cells in blocks that perform a reliable simulation of a second (generalized) cellular automaton. The cells of the latter automaton are also organized in blocks, simulating even more reliably a third automaton, etc. Since all this (a possibly infinite hierarchy) is organized in "software," it must be under repair all the time from damage caused by errors. A large part of the problem is essentially self-stabilization recovering from a mess of arbitrary size and content. The present paper constructs an asynchronous one-dimensional fault-tolerant cellular automaton, with the further feature of "self-organization." The latter means that unless a large amount of input information must be given, the initial configuration can be chosen homogeneous.

  19. Mass and Reliability Source (MaRS) Database

    NASA Technical Reports Server (NTRS)

    Valdenegro, Wladimir

    2017-01-01

    The Mass and Reliability Source (MaRS) Database consolidates components mass and reliability data for all Oribital Replacement Units (ORU) on the International Space Station (ISS) into a single database. It was created to help engineers develop a parametric model that relates hardware mass and reliability. MaRS supplies relevant failure data at the lowest possible component level while providing support for risk, reliability, and logistics analysis. Random-failure data is usually linked to the ORU assembly. MaRS uses this data to identify and display the lowest possible component failure level. As seen in Figure 1, the failure point is identified to the lowest level: Component 2.1. This is useful for efficient planning of spare supplies, supporting long duration crewed missions, allowing quicker trade studies, and streamlining diagnostic processes. MaRS is composed of information from various databases: MADS (operating hours), VMDB (indentured part lists), and ISS PART (failure data). This information is organized in Microsoft Excel and accessed through a program made in Microsoft Access (Figure 2). The focus of the Fall 2017 internship tour was to identify the components that were the root cause of failure from the given random-failure data, develop a taxonomy for the database, and attach material headings to the component list. Secondary objectives included verifying the integrity of the data in MaRS, eliminating any part discrepancies, and generating documentation for future reference. Due to the nature of the random-failure data, data mining had to be done manually without the assistance of an automated program to ensure positive identification.

  20. Reliability, Validity and Usefulness of 30–15 Intermittent Fitness Test in Female Soccer Players

    PubMed Central

    Čović, Nedim; Jelešković, Eldin; Alić, Haris; Rađo, Izet; Kafedžić, Erduan; Sporiš, Goran; McMaster, Daniel T.; Milanović, Zoran

    2016-01-01

    PURPOSE: The aim of this study was to examine the reliability, validity and usefulness of the 30–15IFT in competitive female soccer players. METHODS: Seventeen elite female soccer players participated in the study. A within subject test-retest study design was utilized to assess the reliability of the 30–15 intermittent fitness test (IFT). Seven days prior to 30–15IFT, subjects performed a continuous aerobic running test (CT) under laboratory conditions to assess the criterion validity of the 30–15IFT. End running velocity (VCT and VIFT), peak heart rate (HRpeak) and maximal oxygen consumption (VO2max) were collected and/or estimated for both tests. RESULTS: VIFT (ICC = 0.91; CV = 1.8%), HRpeak (ICC = 0.94; CV = 1.2%), and VO2max (ICC = 0.94; CV = 1.6%) obtained from the 30–15IFT were all deemed highly reliable (p > 0.05). Pearson product moment correlations between the CT and 30–15IFT for VO2max, HRpeak and end running velocity were large (r = 0.67, p = 0.013), very large (r = 0.77, p = 0.02) and large (r = 0.57, p = 0.042), respectively. CONCLUSION: Current findings suggest that the 30–15IFT is a valid and reliable intermittent aerobic fitness test of elite female soccer players. The findings have also provided practitioners with evidence to support the accurate detection of meaningful individual changes in VIFT of 0.5 km/h (1 stage) and HRpeak of 2 bpm. This information may assist coaches in monitoring “real” aerobic fitness changes to better inform training of female intermittent team sport athletes. Lastly, coaches could use the 30–15IFT as a practical alternative to laboratory based assessments to assess and monitor intermittent aerobic fitness changes in their athletes. PMID:27909408

  1. Compound estimation procedures in reliability

    NASA Technical Reports Server (NTRS)

    Barnes, Ron

    1990-01-01

    At NASA, components and subsystems of components in the Space Shuttle and Space Station generally go through a number of redesign stages. While data on failures for various design stages are sometimes available, the classical procedures for evaluating reliability only utilize the failure data on the present design stage of the component or subsystem. Often, few or no failures have been recorded on the present design stage. Previously, Bayesian estimators for the reliability of a single component, conditioned on the failure data for the present design, were developed. These new estimators permit NASA to evaluate the reliability, even when few or no failures have been recorded. Point estimates for the latter evaluation were not possible with the classical procedures. Since different design stages of a component (or subsystem) generally have a good deal in common, the development of new statistical procedures for evaluating the reliability, which consider the entire failure record for all design stages, has great intuitive appeal. A typical subsystem consists of a number of different components and each component has evolved through a number of redesign stages. The present investigations considered compound estimation procedures and related models. Such models permit the statistical consideration of all design stages of each component and thus incorporate all the available failure data to obtain estimates for the reliability of the present version of the component (or subsystem). A number of models were considered to estimate the reliability of a component conditioned on its total failure history from two design stages. It was determined that reliability estimators for the present design stage, conditioned on the complete failure history for two design stages have lower risk than the corresponding estimators conditioned only on the most recent design failure data. Several models were explored and preliminary models involving bivariate Poisson distribution and the

  2. Cellular Therapy to Obtain Rapid Endochondral Bone Formation

    DTIC Science & Technology

    2012-03-01

    biological information and involves the development of a novel biomaterial that can safely house the cells expressing the bone inductive factor to... produce the new bone at which time the material is then selectively eliminated. Ultimately this system has significant applicability. Often bone graft must...hypothesis will provide a safe and efficacious material for the production of bone leading to reliable fracture healing, circumventing the need for

  3. Reliability of rehabilitative ultrasonographic imaging for muscle thickness measurement of the rhomboid major.

    PubMed

    Jeong, Ju Ri; Ko, Young Jun; Ha, Hyun Geun; Lee, Wan Hee

    2016-03-01

    This study was to establish inter-rater and intrarater reliability of the rehabilitative ultrasonographic imaging (RUSI) technique for muscle thickness measurement of the rhomboid major at rest and with the shoulder abducted to 90°. Twenty-four young adults (eight men, 16 women; right-handed; mean age [±SD], 24·4 years [±2·6]) with no history of neck, shoulder, or arm pain were recruited. Rhomboid major muscle images were obtained in the resting position and with shoulder in 90° abduction using an ultrasonography system with a 7·5-MHz linear transducer. In these two positions, the examiners found the site at which the transducer could be placed. Two examiners obtained the images of all participants in three test sessions at random. Intraclass correlation coefficients (ICC) were used to estimate reliability. All ICCs (95% CI) were >0·75, ranging from 0·93 to 0·98, which indicates good reliability. The ICCs for inter-rater reliability ranged from 0·75 to 0·94. For the absolute value of the difference in the intra-examiner reliability between the right and left ratios, the ICCs ranged from 0·58 to 0·91. In this study, the intra- and interexaminer reliability of muscle thickness measurements of the rhomboid major were good. Therefore, we suggest that muscle thickness measurements of the rhomboid major obtained with the RUSI technique would be useful for clinical rehabilitative assessment. © 2014 Scandinavian Society of Clinical Physiology and Nuclear Medicine. Published by John Wiley & Sons Ltd.

  4. Effectiveness of Visual Methods in Information Procedures for Stem Cell Recipients and Donors

    PubMed Central

    Sarıtürk, Çağla; Gereklioğlu, Çiğdem; Korur, Aslı; Asma, Süheyl; Yeral, Mahmut; Solmaz, Soner; Büyükkurt, Nurhilal; Tepebaşı, Songül; Kozanoğlu, İlknur; Boğa, Can; Özdoğu, Hakan

    2017-01-01

    Objective: Obtaining informed consent from hematopoietic stem cell recipients and donors is a critical step in the transplantation process. Anxiety may affect their understanding of the provided information. However, use of audiovisual methods may facilitate understanding. In this prospective randomized study, we investigated the effectiveness of using an audiovisual method of providing information to patients and donors in combination with the standard model. Materials and Methods: A 10-min informational animation was prepared for this purpose. In total, 82 participants were randomly assigned to two groups: group 1 received the additional audiovisual information and group 2 received standard information. A 20-item questionnaire was administered to participants at the end of the informational session. Results: A reliability test and factor analysis showed that the questionnaire was reliable and valid. For all participants, the mean overall satisfaction score was 184.8±19.8 (maximum possible score of 200). However, for satisfaction with information about written informed consent, group 1 scored significantly higher than group 2 (p=0.039). Satisfaction level was not affected by age, education level, or differences between the physicians conducting the informative session. Conclusion: This study shows that using audiovisual tools may contribute to a better understanding of the informed consent procedure and potential risks of stem cell transplantation. PMID:27476890

  5. Reliability of the Test of Integrated Language and Literacy Skills (TILLS)

    ERIC Educational Resources Information Center

    Mailend, Marja-Liisa; Plante, Elena; Anderson, Michele A.; Applegate, E. Brooks; Nelson, Nickola W.

    2016-01-01

    Background: As new standardized tests become commercially available, it is critical that clinicians have access to the information about a test's psychometric properties, including aspects of reliability. Aims: The purpose of the three studies reported in this article was to investigate the reliability of a new test, the Test of Integrated…

  6. An approach to solving large reliability models

    NASA Technical Reports Server (NTRS)

    Boyd, Mark A.; Veeraraghavan, Malathi; Dugan, Joanne Bechta; Trivedi, Kishor S.

    1988-01-01

    This paper describes a unified approach to the problem of solving large realistic reliability models. The methodology integrates behavioral decomposition, state trunction, and efficient sparse matrix-based numerical methods. The use of fault trees, together with ancillary information regarding dependencies to automatically generate the underlying Markov model state space is proposed. The effectiveness of this approach is illustrated by modeling a state-of-the-art flight control system and a multiprocessor system. Nonexponential distributions for times to failure of components are assumed in the latter example. The modeling tool used for most of this analysis is HARP (the Hybrid Automated Reliability Predictor).

  7. Correlation between doctor's belief on the patient's self-determination and medical outcomes in obtaining informed consent.

    PubMed

    Yoshihara, Keisuke; Takase, Kozo

    2013-03-01

    We employed a questionnaire survey to assess attitudes toward informed consent (IC) among hospital doctors. Based on the result of the correlation analysis, the following two hypotheses were identified. The first hypothesis is that "the doctor's belief that the patient's self-determination is possible promotes cure of illness by obtaining IC." The second hypothesis is that "the doctor's belief that the patient's self-determination is possible has a positive influence on patient's quality of life by obtaining IC." We clarified the rationale for explaining these two hypotheses by applying cross tabulation analysis, discriminant analysis and principal component analysis (PCA). The doctors were divided into two groups in terms of their position on the patient's self-determination. One group of doctors believed the possibility of patient's self-determination, and the other did not. Through our statistical analyses, the characteristics that discriminate these two groups were identified. It was revealed that the former group placed a great importance on the hospitality value, while the latter placed an importance on the service value. Agreement or rejection of the concept of IC has been demonstrated as a key distinguishing factor between the two groups. The results of PCA showed that the doctor's belief on the patient's self-determination in obtaining IC had a significant effect on medical outcomes, and the two above-mentioned hypotheses were revealed.

  8. The Reliability and Legality of Online Education

    ERIC Educational Resources Information Center

    Agbebaku, C. A.; Adavbiele, A. Justina

    2016-01-01

    Today, the classroom beyond the border through online Open University education in Nigeria has made it possible for many students to obtain university degrees. However, the reliability and legality of such degrees have become questionable. This paper is a descriptive exploratory case study regarding the public and private sector end-users, whose…

  9. Reliable retrieval of atmospheric and aquatic parameters in coastal and inland environments from polar-orbiting and geostationary platforms: challenges and opportunities

    NASA Astrophysics Data System (ADS)

    Stamnes, Knut; Li, Wei; Lin, Zhenyi; Fan, Yongzhen; Chen, Nan; Gatebe, Charles; Ahn, Jae-Hyun; Kim, Wonkook; Stamnes, Jakob J.

    2017-04-01

    Simultaneous retrieval of aerosol and surface properties by means of inverse techniques based on a coupled atmosphere-surface radiative transfer model, neural networks, and optimal estimation can yield considerable improvements in retrieval accuracy in complex aquatic environments compared with traditional methods. Remote sensing of such environments represent specific challenges due (i) the complexity of the atmosphere and water inherent optical properties, (ii) unique bidirectional dependencies of the water-leaving radiance, and (iii) the desire to do retrievals for large solar zenith and viewing angles. We will discuss (a) how challenges related to atmospheric gaseous absorption, absorbing aerosols, and turbid waters can be addressed by using a coupled atmosphere-surface radiative transfer (forward) model in the retrieval process, (b) how the need to correct for bidirectional effects can be accommodated in a systematic and reliable manner, (c) how polarization information can be utilized, (d) how the curvature of the atmosphere can be taken into account, and (e) how neural networks and optimal estimation can be used to obtain fast yet accurate retrievals. Special emphasis will be placed on how information from existing and future sensors deployed on polar-orbiting and geostationary platforms can be obtained in a reliable and accurate manner. The need to provide uncertainty assessments and error budgets will also be discussed.

  10. Scale for positive aspects of caregiving experience: development, reliability, and factor structure.

    PubMed

    Kate, N; Grover, S; Kulhara, P; Nehra, R

    2012-06-01

    OBJECTIVE. To develop an instrument (Scale for Positive Aspects of Caregiving Experience [SPACE]) that evaluates positive caregiving experience and assess its psychometric properties. METHODS. Available scales which assess some aspects of positive caregiving experience were reviewed and a 50-item questionnaire with a 5-point rating was constructed. In all, 203 primary caregivers of patients with severe mental disorders were asked to complete the questionnaire. Internal consistency, test-retest reliability, cross-language reliability, split-half reliability, and face validity were evaluated. Principal component factor analysis was run to assess the factorial validity of the scale. RESULTS. The scale developed as part of the study was found to have good internal consistency, test-retest reliability, cross-language reliability, split-half reliability, and face validity. Principal component factor analysis yielded a 4-factor structure, which also had good test-retest reliability and cross-language reliability. There was a strong correlation between the 4 factors obtained. CONCLUSION. The SPACE developed as part of this study has good psychometric properties.

  11. Mass and Reliability System (MaRS)

    NASA Technical Reports Server (NTRS)

    Barnes, Sarah

    2016-01-01

    The Safety and Mission Assurance (S&MA) Directorate is responsible for mitigating risk, providing system safety, and lowering risk for space programs from ground to space. The S&MA is divided into 4 divisions: The Space Exploration Division (NC), the International Space Station Division (NE), the Safety & Test Operations Division (NS), and the Quality and Flight Equipment Division (NT). The interns, myself and Arun Aruljothi, will be working with the Risk & Reliability Analysis Branch under the NC Division's. The mission of this division is to identify, characterize, diminish, and communicate risk by implementing an efficient and effective assurance model. The team utilizes Reliability and Maintainability (R&M) and Probabilistic Risk Assessment (PRA) to ensure decisions concerning risks are informed, vehicles are safe and reliable, and program/project requirements are realistic and realized. This project pertains to the Orion mission, so it is geared toward a long duration Human Space Flight Program(s). For space missions, payload is a critical concept; balancing what hardware can be replaced by components verse by Orbital Replacement Units (ORU) or subassemblies is key. For this effort a database was created that combines mass and reliability data, called Mass and Reliability System or MaRS. The U.S. International Space Station (ISS) components are used as reference parts in the MaRS database. Using ISS components as a platform is beneficial because of the historical context and the environment similarities to a space flight mission. MaRS uses a combination of systems: International Space Station PART for failure data, Vehicle Master Database (VMDB) for ORU & components, Maintenance & Analysis Data Set (MADS) for operation hours and other pertinent data, & Hardware History Retrieval System (HHRS) for unit weights. MaRS is populated using a Visual Basic Application. Once populated, the excel spreadsheet is comprised of information on ISS components including

  12. Assessing reliability and validity measures in managed care studies.

    PubMed

    Montoya, Isaac D

    2003-01-01

    To review the reliability and validity literature and develop an understanding of these concepts as applied to managed care studies. Reliability is a test of how well an instrument measures the same input at varying times and under varying conditions. Validity is a test of how accurately an instrument measures what one believes is being measured. A review of reliability and validity instructional material was conducted. Studies of managed care practices and programs abound. However, many of these studies utilize measurement instruments that were developed for other purposes or for a population other than the one being sampled. In other cases, instruments have been developed without any testing of the instrument's performance. The lack of reliability and validity information may limit the value of these studies. This is particularly true when data are collected for one purpose and used for another. The usefulness of certain studies without reliability and validity measures is questionable, especially in cases where the literature contradicts itself

  13. Readability and Test-Retest Reliability of a Psychometric Instrument Designed to Assess HIV/AIDS Attitudes, Beliefs, Behaviours and Sources of HIV Prevention Information of Young Adults

    ERIC Educational Resources Information Center

    Balogun, Joseph; Abiona, Titilayo; Lukobo-Durrell, Mainza; Adefuye, Adedeji; Amosun, Seyi; Frantz, Jose; Yakut, Yavuz

    2011-01-01

    Objective: This comparative study evaluated the readability and test-retest reliability of a questionnaire designed to assess the attitudes, beliefs behaviours and sources of information about HIV/AIDS among young adults recruited from universities in the United States of America (USA), Turkey and South Africa. Design/Setting: The instrument was…

  14. Measuring teacher self-report on classroom practices: Construct validity and reliability of the Classroom Strategies Scale-Teacher Form.

    PubMed

    Reddy, Linda A; Dudek, Christopher M; Fabiano, Gregory A; Peters, Stephanie

    2015-12-01

    This article presents information about the construct validity and reliability of a new teacher self-report measure of classroom instructional and behavioral practices (the Classroom Strategies Scales-Teacher Form; CSS-T). The theoretical underpinnings and empirical basis for the instructional and behavioral management scales are presented. Information is provided about the construct validity, internal consistency, test-retest reliability, and freedom from item-bias of the scales. Given previous investigations with the CSS Observer Form, it was hypothesized that internal consistency would be adequate and that confirmatory factor analyses (CFA) of CSS-T data from 293 classrooms would offer empirical support for the CSS-T's Total, Composite and subscales, and yield a similar factor structure to that of the CSS Observer Form. Goodness-of-fit indices of χ2/df, Root Mean Square Error of Approximation, Goodness of Fit Index, and Adjusted Goodness of Fit Index suggested satisfactory fit of proposed CFA models whereas the Comparative Fit Index did not. Internal consistency estimates of .93 and .94 were obtained for the Instructional Strategies and Behavioral Strategies Total scales respectively. Adequate test-retest reliability was found for instructional and behavioral total scales (r = .79, r = .84, percent agreement 93% and 93%). The CSS-T evidences freedom from item bias on important teacher demographics (age, educational degree, and years of teaching experience). Implications of results are discussed. (c) 2015 APA, all rights reserved).

  15. Reliable aerial thermography for energy conservation

    NASA Technical Reports Server (NTRS)

    Jack, J. R.; Bowman, R. L.

    1981-01-01

    A method for energy conservation, the aerial thermography survey, is discussed. It locates sources of energy losses and wasteful energy management practices. An operational map is presented for clear sky conditions. The map outlines the key environmental conditions conductive to obtaining reliable aerial thermography. The map is developed from defined visual and heat loss discrimination criteria which are quantized based on flat roof heat transfer calculations.

  16. Estimating Between-Person and Within-Person Subscore Reliability with Profile Analysis.

    PubMed

    Bulut, Okan; Davison, Mark L; Rodriguez, Michael C

    2017-01-01

    Subscores are of increasing interest in educational and psychological testing due to their diagnostic function for evaluating examinees' strengths and weaknesses within particular domains of knowledge. Previous studies about the utility of subscores have mostly focused on the overall reliability of individual subscores and ignored the fact that subscores should be distinct and have added value over the total score. This study introduces a profile reliability approach that partitions the overall subscore reliability into within-person and between-person subscore reliability. The estimation of between-person reliability and within-person reliability coefficients is demonstrated using subscores from number-correct scoring, unidimensional and multidimensional item response theory scoring, and augmented scoring approaches via a simulation study and a real data study. The effects of various testing conditions, such as subtest length, correlations among subscores, and the number of subtests, are examined. Results indicate that there is a substantial trade-off between within-person and between-person reliability of subscores. Profile reliability coefficients can be useful in determining the extent to which subscores provide distinct and reliable information under various testing conditions.

  17. Eco-label conveys reliable information on fish stock health to seafood consumers.

    PubMed

    Gutiérrez, Nicolás L; Valencia, Sarah R; Branch, Trevor A; Agnew, David J; Baum, Julia K; Bianchi, Patricia L; Cornejo-Donoso, Jorge; Costello, Christopher; Defeo, Omar; Essington, Timothy E; Hilborn, Ray; Hoggarth, Daniel D; Larsen, Ashley E; Ninnes, Chris; Sainsbury, Keith; Selden, Rebecca L; Sistla, Seeta; Smith, Anthony D M; Stern-Pirlot, Amanda; Teck, Sarah J; Thorson, James T; Williams, Nicholas E

    2012-01-01

    Concerns over fishing impacts on marine populations and ecosystems have intensified the need to improve ocean management. One increasingly popular market-based instrument for ecological stewardship is the use of certification and eco-labeling programs to highlight sustainable fisheries with low environmental impacts. The Marine Stewardship Council (MSC) is the most prominent of these programs. Despite widespread discussions about the rigor of the MSC standards, no comprehensive analysis of the performance of MSC-certified fish stocks has yet been conducted. We compared status and abundance trends of 45 certified stocks with those of 179 uncertified stocks, finding that 74% of certified fisheries were above biomass levels that would produce maximum sustainable yield, compared with only 44% of uncertified fisheries. On average, the biomass of certified stocks increased by 46% over the past 10 years, whereas uncertified fisheries increased by just 9%. As part of the MSC process, fisheries initially go through a confidential pre-assessment process. When certified fisheries are compared with those that decline to pursue full certification after pre-assessment, certified stocks had much lower mean exploitation rates (67% of the rate producing maximum sustainable yield vs. 92% for those declining to pursue certification), allowing for more sustainable harvesting and in many cases biomass rebuilding. From a consumer's point of view this means that MSC-certified seafood is 3-5 times less likely to be subject to harmful fishing than uncertified seafood. Thus, MSC-certification accurately identifies healthy fish stocks and conveys reliable information on stock status to seafood consumers.

  18. Eco-Label Conveys Reliable Information on Fish Stock Health to Seafood Consumers

    PubMed Central

    Gutiérrez, Nicolás L.; Valencia, Sarah R.; Branch, Trevor A.; Agnew, David J.; Baum, Julia K.; Bianchi, Patricia L.; Cornejo-Donoso, Jorge; Costello, Christopher; Defeo, Omar; Essington, Timothy E.; Hilborn, Ray; Hoggarth, Daniel D.; Larsen, Ashley E.; Ninnes, Chris; Sainsbury, Keith; Selden, Rebecca L.; Sistla, Seeta; Smith, Anthony D. M.; Stern-Pirlot, Amanda; Teck, Sarah J.; Thorson, James T.; Williams, Nicholas E.

    2012-01-01

    Concerns over fishing impacts on marine populations and ecosystems have intensified the need to improve ocean management. One increasingly popular market-based instrument for ecological stewardship is the use of certification and eco-labeling programs to highlight sustainable fisheries with low environmental impacts. The Marine Stewardship Council (MSC) is the most prominent of these programs. Despite widespread discussions about the rigor of the MSC standards, no comprehensive analysis of the performance of MSC-certified fish stocks has yet been conducted. We compared status and abundance trends of 45 certified stocks with those of 179 uncertified stocks, finding that 74% of certified fisheries were above biomass levels that would produce maximum sustainable yield, compared with only 44% of uncertified fisheries. On average, the biomass of certified stocks increased by 46% over the past 10 years, whereas uncertified fisheries increased by just 9%. As part of the MSC process, fisheries initially go through a confidential pre-assessment process. When certified fisheries are compared with those that decline to pursue full certification after pre-assessment, certified stocks had much lower mean exploitation rates (67% of the rate producing maximum sustainable yield vs. 92% for those declining to pursue certification), allowing for more sustainable harvesting and in many cases biomass rebuilding. From a consumer’s point of view this means that MSC-certified seafood is 3–5 times less likely to be subject to harmful fishing than uncertified seafood. Thus, MSC-certification accurately identifies healthy fish stocks and conveys reliable information on stock status to seafood consumers. PMID:22928029

  19. A comparison of manual anthropometric measurements with Kinect-based scanned measurements in terms of precision and reliability.

    PubMed

    Bragança, Sara; Arezes, Pedro; Carvalho, Miguel; Ashdown, Susan P; Castellucci, Ignacio; Leão, Celina

    2018-01-01

    Collecting anthropometric data for real-life applications demands a high degree of precision and reliability. It is important to test new equipment that will be used for data collectionOBJECTIVE:Compare two anthropometric data gathering techniques - manual methods and a Kinect-based 3D body scanner - to understand which of them gives more precise and reliable results. The data was collected using a measuring tape and a Kinect-based 3D body scanner. It was evaluated in terms of precision by considering the regular and relative Technical Error of Measurement and in terms of reliability by using the Intraclass Correlation Coefficient, Reliability Coefficient, Standard Error of Measurement and Coefficient of Variation. The results obtained showed that both methods presented better results for reliability than for precision. Both methods showed relatively good results for these two variables, however, manual methods had better results for some body measurements. Despite being considered sufficiently precise and reliable for certain applications (e.g. apparel industry), the 3D scanner tested showed, for almost every anthropometric measurement, a different result than the manual technique. Many companies design their products based on data obtained from 3D scanners, hence, understanding the precision and reliability of the equipment used is essential to obtain feasible results.

  20. Bi-Factor Multidimensional Item Response Theory Modeling for Subscores Estimation, Reliability, and Classification

    ERIC Educational Resources Information Center

    Md Desa, Zairul Nor Deana

    2012-01-01

    In recent years, there has been increasing interest in estimating and improving subscore reliability. In this study, the multidimensional item response theory (MIRT) and the bi-factor model were combined to estimate subscores, to obtain subscores reliability, and subscores classification. Both the compensatory and partially compensatory MIRT…

  1. Parts, Materials, and Processes Experience Summary. Volume 1; [Catalog of ALERT and Other Information on Basic Design, Reliability, Quality and Applications Programs

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The ALERT program, a system for communicating common problems with parts, materials, and processes, is condensed and catalogued. Expanded information on selected topics is provided by relating the problem area (failure) to the cause, the investigations and findings, the suggestions for avoidance (inspections, screening tests, proper part applications), and failure analysis procedures. The basic objective of ALERT is the avoidance of the recurrence of parts, materials, and processed problems, thus improving the reliability of equipment produced for and used by the government.

  2. Management of ATM-based networks supporting multimedia medical information systems

    NASA Astrophysics Data System (ADS)

    Whitman, Robert A.; Blaine, G. James; Fritz, Kevin; Goodgold, Ken; Heisinger, Patrick

    1997-05-01

    Medical information systems are acquiring the ability to collect and deliver many different types of medical information. In support of the increased network demands necessitated by these expanded capabilities, asynchronous transfer mode (ATM) based networks are being deployed in medical care systems. While ATM supplies a much greater line rate than currently deployed networks, the management and standards surrounding ATM are yet to mature. This paper explores the management and control issues surrounding an ATM network supporting medical information systems, and examines how management impacts network performance and robustness. A multivendor ATM network at the BJC Health System/Washington University and the applications using the network are discussed. Performance information for specific applications is presented and analyzed. Network management's influence on application reliability is outlined. The information collected is used to show how ATM network standards and management tools influence network reliability and performance. Performance of current applications using the ATM network is discussed. Special attention is given to issues encountered in implementation of hypertext transfer protocol over ATM internet protocol (IP) communications. A classical IP ATM implementation yields greater than twenty percent higher network performance over LANE. Maximum performance for a host's suite of applications can be obtained by establishing multiple individually engineered IP links through its ATM network connection.

  3. Review of Reliability-Based Design Optimization Approach and Its Integration with Bayesian Method

    NASA Astrophysics Data System (ADS)

    Zhang, Xiangnan

    2018-03-01

    A lot of uncertain factors lie in practical engineering, such as external load environment, material property, geometrical shape, initial condition, boundary condition, etc. Reliability method measures the structural safety condition and determine the optimal design parameter combination based on the probabilistic theory. Reliability-based design optimization (RBDO) is the most commonly used approach to minimize the structural cost or other performance under uncertainty variables which combines the reliability theory and optimization. However, it cannot handle the various incomplete information. The Bayesian approach is utilized to incorporate this kind of incomplete information in its uncertainty quantification. In this paper, the RBDO approach and its integration with Bayesian method are introduced.

  4. The reliability of cause-of-death coding in The Netherlands.

    PubMed

    Harteloh, Peter; de Bruin, Kim; Kardaun, Jan

    2010-08-01

    Cause-of-death statistics are a major source of information for epidemiological research or policy decisions. Information on the reliability of these statistics is important for interpreting trends in time or differences between populations. Variations in coding the underlying cause of death could hinder the attribution of observed differences to determinants of health. Therefore we studied the reliability of cause-of-death statistics in The Netherlands. We performed a double coding study. Death certificates from the month of May 2005 were coded again in 2007. Each death certificate was coded manually by four coders. Reliability was measured by calculating agreement between coders (intercoder agreement) and by calculating the consistency of each individual coder in time (intracoder agreement). Our analysis covered an amount of 10,833 death certificates. The intercoder agreement of four coders on the underlying cause of death was 78%. In 2.2% of the cases coders agreed on a change of the code assigned in 2005. The (mean) intracoder agreement of four coders was 89%. Agreement was associated with the specificity of the ICD-10 code (chapter, three digits, four digits), the age of the deceased, the number of coders and the number of diseases reported on the death certificate. The reliability of cause-of-death statistics turned out to be high (>90%) for major causes of death such as cancers and acute myocardial infarction. For chronic diseases, such as diabetes and renal insufficiency, reliability was low (<70%). The reliability of cause-of-death statistics varies by ICD-10 code/chapter. A statistical office should provide coders with (additional) rules for coding diseases with a low reliability and evaluate these rules regularly. Users of cause-of-death statistics should exercise caution when interpreting causes of death with a low reliability. Studies of reliability should take into account the number of coders involved and the number of codes on a death certificate.

  5. 30 CFR 285.113 - How will data and information obtained by MMS under this part be disclosed to the public?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How will data and information obtained by MMS under this part be disclosed to the public? 285.113 Section 285.113 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY ALTERNATE USES OF EXISTING...

  6. Communication in Medicine: A Study of How Family Doctors Obtain Information on Recent Advances in the Treatment of Rheumatic Diseases

    ERIC Educational Resources Information Center

    Murray-Lyon, N.

    1977-01-01

    The results of a questionnaire on how 131 family doctors in Glasgow and the West of Scotland obtain information regarding recent advances are described, indicating that medical journals and formal lectures and symposia are still popular. Tape/slide and television presentations were not considered of much value. (Author/LBH)

  7. Informed consent should be obtained from patients to use products (skin substitutes) and dressings containing biological material.

    PubMed

    Enoch, S; Shaaban, H; Dunn, K W

    2005-01-01

    Biological products (tissue engineered skin, allograft and xenograft, and biological dressings) are widely used in the treatment of burns, chronic wounds, and other forms of acute injury. However, the religious and ethical issues, including consent, arising from their use have never been addressed in the medical literature. This study was aimed to ascertain the views of religious leaders about the acceptability of biological products and to evaluate awareness among healthcare professionals about their constituents. The religious groups that make up about 75% of the United Kingdom population were identified and a questionnaire on 11 biological products was sent to its leaders. Another questionnaire concerning 17 products (11 biological and 6 synthetic dressings) was sent to 100 healthcare professionals working in seven specialist units in the UK. All religious leaders (100% response rate) replied, some after consultation with international bodies. Among them, 77% said that patients should be informed of the constituents of the biological products and consent obtained. Some leaders expressed concerns about particular products including the transmission of viral and prion diseases, cruelty to animals, and material derived from neonates. None of the healthcare professionals (73% response rate) surveyed knew the constituents of all the products correctly. Ignoring religious sensitivities and neglecting consent in the usage of biological products could have very serious implications, including litigation. Hospitals and manufacturers should take immediate measures to enlighten healthcare professionals of the constituents of these products so that they can obtain informed consent from patients.

  8. Practical tool to assess reliability of web-based medicines information.

    PubMed

    Lebanova, Hristina; Getov, Ilko; Grigorov, Evgeni

    2014-02-01

    Information disseminated by medicines information systems is not always easy to apply. Nowadays internet provides access to enormous volume and range of health information that was previously inaccessible both for medical specialists and consumers. The aim of this study is to assess internet as a source of drug and health related information and to create test methodology to evaluate the top 10 visited health-related web-sites in Bulgaria. Using existing scientific methodologies for evaluation of web sources, a new algorithm of three-step approach consisting of score-card validation of the drug-related information in the 10 most visited Bulgarian web-sites was created. In many cases the drug information in the internet sites contained errors and discrepancies. Some of the published materials were not validated; they were out-of-date and could cause confusion for consumers. The quality of the online health information is a cause for considerable information noise and threat to patients' safety and rational drug use. There is a need of monitoring the drugs information available online in order to prevent patient misinformation and confusion that could lead to medication errors and abuse.

  9. Older males signal more reliably.

    PubMed Central

    Proulx, Stephen R; Day, Troy; Rowe, Locke

    2002-01-01

    The hypothesis that females prefer older males because they have higher mean fitness than younger males has been the centre of recent controversy. These discussions have focused on the success of a female who prefers males of a particular age class when age cues, but not quality cues, are available. Thus, if the distribution of male quality changes with age, such that older males have on average genotypes with higher fitness than younger males, then a female who mates with older males has fitter offspring, which allows the female preference to spread through a genetic correlation. We develop a general model for male display in a species with multiple reproductive bouts that allows us to identify the conditions that promote reliable signalling within an age class. Because males have opportunities for future reproduction, they will reduce their levels of advertising compared with a semelparous species. In addition, because higher-quality males have more future reproduction, they will reduce their advertising more than low-quality males. Thus, the conditions for reliable signalling in a semelparous organism are generally not sufficient to produce reliable signalling in species with multiple reproductive bouts. This result is due to the possibility of future reproduction so that, as individuals age and the opportunities for future reproduction fade, signalling becomes more reliable. This provides a novel rationale for female preference for older mates; older males reveal more information in their sexual displays. PMID:12495495

  10. Google it: obtaining information about local STD/HIV testing services online.

    PubMed

    Habel, Melissa A; Hood, Julia; Desai, Sheila; Kachur, Rachel; Buhi, Eric R; Liddon, Nicole

    2011-04-01

    Although the Internet is one of the most commonly accessed resources for health information, finding information on local sexual health services, such as sexually transmitted disease (STD) testing, can be challenging. Recognizing that most quests for online health information begin with search engines, the purpose of this exploratory study was to examine the extent to which online information about local STD/HIV testing services can be found using Google. Queries on STD and HIV testing services were executed in Google for 6 geographically unique locations across the United States. The first 3 websites that resulted from each query were coded for the following characteristics: (1) relevancy to the search topic, (2) domain and purpose, (3) rank in Google results, and (4) content. Websites hosted at .com (57.3%), .org (25.7%), and .gov (10.5%) domains were retrieved most frequently. Roughly half of all websites (n = 376) provided information relevant to the query, and about three-quarters (77.0%) of all queries yielded at least 1 relevant website within the first 3 results. Searches for larger cities were more likely to yield relevant results compared with smaller cities (odds ratio [OR] = 10.0, 95% confidence interval [CI] = 5.6, 17.9). On comparison with .com domains, .gov (OR = 2.9, 95% CI = 1.4, 5.6) and .org domains (OR = 2.9, 95% CI = 1.7, 4.8) were more likely to provide information of the location to get tested. Ease of online access to information about sexual health services varies by search topic and locale. Sexual health service providers must optimize their website placement so as to reach a greater proportion of the sexually active population who use web search engines.

  11. Obtaining soil hydraulic parameters from data assimilation under different climatic/soil conditions

    USDA-ARS?s Scientific Manuscript database

    Obtaining reliable soil hydraulic properties is essential to correctly simulating soil water content (SWC), which is a key component of countless applications such as agricultural management, soil remediation, aquifer protection, etc. Soil hydraulic properties can be measured in the laboratory; howe...

  12. Ring-like reliable PON planning with physical constraints for a smart grid

    NASA Astrophysics Data System (ADS)

    Wang, Xin; Gu, Rentao; Ji, Yuefeng

    2016-01-01

    Due to the high reliability requirements in the communication networks of a smart grid, a ring-like reliable PON is an ideal choice to carry power distribution information. Economical network planning is also very important for the smart grid communication infrastructure. Although the ring-like reliable PON has been widely used in the real applications, as far as we know, little research has been done on the network optimization subject of the ring-like reliable PON. Most PON planning research studies only consider a star-like topology or cascaded PON network, which barely guarantees the reliability requirements of the smart grid. In this paper, we mainly investigate the economical network planning problem for the ring-like reliable PON of the smart grid. To address this issue, we built a mathematical model for the planning problem of the ring-like reliable PON, and the objective was to minimize the total deployment costs under physical constraints. The model is simplified such that all of the nodes have the same properties, except OLT, because each potential splitter site can be located in the same ONU position in power communication networks. The simplified model is used to construct an optimal main tree topology in the complete graph and a backup-protected tree topology in the residual graph. An efficient heuristic algorithm, called the Constraints and Minimal Weight Oriented Fast Searching Algorithm (CMW-FSA), is proposed. In CMW-FSA, a feasible solution can be obtained directly with oriented constraints and a few recursive search processes. From the simulation results, the proposed planning model and CMW-FSA are verified to be accurate (the error rates are less than 0.4%) and effective compared with the accurate solution (CAESA), especially in small and sparse scenarios. The CMW-FSA significantly reduces the computation time compared with the CAESA. The time complexity algorithm of the CMW-FSA is acceptable and calculated as T(n) = O(n3). After evaluating the

  13. Study of complete interconnect reliability for a GaAs MMIC power amplifier

    NASA Astrophysics Data System (ADS)

    Lin, Qian; Wu, Haifeng; Chen, Shan-ji; Jia, Guoqing; Jiang, Wei; Chen, Chao

    2018-05-01

    By combining the finite element analysis (FEA) and artificial neural network (ANN) technique, the complete prediction of interconnect reliability for a monolithic microwave integrated circuit (MMIC) power amplifier (PA) at the both of direct current (DC) and alternating current (AC) operation conditions is achieved effectively in this article. As a example, a MMIC PA is modelled to study the electromigration failure of interconnect. This is the first time to study the interconnect reliability for an MMIC PA at the conditions of DC and AC operation simultaneously. By training the data from FEA, a high accuracy ANN model for PA reliability is constructed. Then, basing on the reliability database which is obtained from the ANN model, it can give important guidance for improving the reliability design for IC.

  14. Model of load balancing using reliable algorithm with multi-agent system

    NASA Astrophysics Data System (ADS)

    Afriansyah, M. F.; Somantri, M.; Riyadi, M. A.

    2017-04-01

    Massive technology development is linear with the growth of internet users which increase network traffic activity. It also increases load of the system. The usage of reliable algorithm and mobile agent in distributed load balancing is a viable solution to handle the load issue on a large-scale system. Mobile agent works to collect resource information and can migrate according to given task. We propose reliable load balancing algorithm using least time first byte (LFB) combined with information from the mobile agent. In system overview, the methodology consisted of defining identification system, specification requirements, network topology and design system infrastructure. The simulation method for simulated system was using 1800 request for 10 s from the user to the server and taking the data for analysis. Software simulation was based on Apache Jmeter by observing response time and reliability of each server and then compared it with existing method. Results of performed simulation show that the LFB method with mobile agent can perform load balancing with efficient systems to all backend server without bottleneck, low risk of server overload, and reliable.

  15. Do McKinnon lists provide reliable data in bird species frequency? A comparison with transect-based data

    NASA Astrophysics Data System (ADS)

    Cento, Michele; Scrocca, Roberto; Coppola, Michele; Rossi, Maurizio; Di Giuseppe, Riccardo; Battisti, Corrado; Luiselli, Luca; Amori, Giovanni

    2018-05-01

    Although occurrence-based listing methods could provide reliable lists of species composition for a site, the effective reliability of this method to provide more detailed information about species frequency (and abundance) has been rarely tested. In this paper, we compared the species frequencies obtained for the same set of species-rich sites (wetlands of central Italy) from two different methods: McKinnon lists and line transects. In all sites we observed: (i) rapid cumulating curves of line transect abundance frequencies toward the asymptote represented by the maximum value in McKinnon occurrence frequency; (ii) a large amount of species having a low frequency with line transect method showing a high range of variation in frequency obtained by McKinnon lists; (iii) a set of species having a subdominant (>0.02-<0.05) and dominant species (>0.05) frequency with line transect showed all the highest value in McKinnon frequency. McKinnon lists provides only a coarse-grained proxy of species frequency of individuals distinguishing only between common species (having the highest values of McKinnon frequency) and rare species (all the other species). Although McKinnon lists have some points of strength, this method does not discriminate the frequencies inside the subset of common species (sub-dominant and dominant species). Therefore, we suggest a cautionary approach when McKinnon frequencies should be used to obtain complex univariate metrics of diversity.

  16. DOD Commissaries and Exchanges: Plan and Additional Information Needed on Cost Savings and Metrics for DOD Efforts to Achieve Budget Neutrality

    DTIC Science & Technology

    2016-11-14

    the best practices in project management related to the establishment of goals and time frames.9 We obtained documentary and testimonial evidence...have created new incentives for DOD to assess its approach for managing the commissaries and exchanges. Congress identified $1.3 billion in fiscal...have relevant and reliable information to help management make informed decisions.8 We also reviewed relevant information in the report compared with

  17. Educating anesthesia residents to obtain and document informed consent for epidural labor analgesia: does simulation play a role?

    PubMed

    Antoniou, A; Marmai, K; Qasem, F; Cherry, R; Jones, P M; Singh, S

    2018-05-01

    Informed consent is required before placing an epidural. At our hospital, teaching of residents about this is done informally at the bedside. This study aimed to assess the ability of anesthesia residents to acquire and retain knowledge required when seeking informed consent for epidural labor analgesia. It assessed how well this knowledge was translated to clinical ability, by assessing the verbal consent process during an interaction with a standardized patient. Twenty anesthesia residents were randomized to a 'didactic group' or a 'simulation group'. Each resident was presented with a written scenario and asked to document the informed consent process, as they normally would do (pre-test). The didactic group then had a presentation about informed consent, while the simulation group members interviewed a simulated patient, the scenarios focusing on different aspects of consent. All residents then read a scenario and documented their informed consent process (post-test). Six weeks later all residents interviewed a standardized patient in labor and documented the consent from this interaction (six-week test). There was no significant difference in the baseline performance of the two groups. Both groups showed significant improvement in their written consent documentation at the immediate time point, the improvement in the didactic group being greater. The didactic group performed better at both the immediate time point and the six-week time point. In this small study, a didactic teaching method proved better than simulation-based teaching in helping residents to gain knowledge needed to obtain informed consent for epidural labor analgesia. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Validation of the translation of an instrument to measure reliability of written information on treatment choices: a study on attention deficit/hyperactivity disorder (ADHD).

    PubMed

    Montoya, A; Llopis, N; Gilaberte, I

    2011-12-01

    DISCERN is an instrument designed to help patients assess the reliability of written information on treatment choices. Originally created in English, there is no validated Spanish version of this instrument. This study seeks to validate the Spanish translation of the DISCERN instrument used as a primary measure on a multicenter study aimed to assess the reliability of web-based information on treatment choices for attention deficit/hyperactivity disorder (ADHD). We used a modified version of a method for validating translated instruments in which the original source-language version is formally compared with the back-translated source-language version. Each item was ranked in terms of comparability of language, similarity of interpretability, and degree of understandability. Responses used Likert scales ranging from 1 to 7, where 1 indicates the best interpretability, language and understandability, and 7 indicates the worst. Assessments were performed by 20 raters fluent in the source language. The Spanish translation of DISCERN, based on ratings of comparability, interpretability and degree of understandability (mean score (SD): 1.8 (1.1), 1.4 (0.9) and 1.6 (1.1), respectively), was considered extremely comparable. All items received a score of less than three, therefore no further revision of the translation was needed. The validation process showed that the quality of DISCERN translation was high, validating the comparable language of the tool translated on assessing written information on treatment choices for ADHD.

  19. On-clip high frequency reliability and failure test structures

    DOEpatents

    Snyder, Eric S.; Campbell, David V.

    1997-01-01

    Self-stressing test structures for realistic high frequency reliability characterizations. An on-chip high frequency oscillator, controlled by DC signals from off-chip, provides a range of high frequency pulses to test structures. The test structures provide information with regard to a variety of reliability failure mechanisms, including hot-carriers, electromigration, and oxide breakdown. The system is normally integrated at the wafer level to predict the failure mechanisms of the production integrated circuits on the same wafer.

  20. On-clip high frequency reliability and failure test structures

    DOEpatents

    Snyder, E.S.; Campbell, D.V.

    1997-04-29

    Self-stressing test structures for realistic high frequency reliability characterizations. An on-chip high frequency oscillator, controlled by DC signals from off-chip, provides a range of high frequency pulses to test structures. The test structures provide information with regard to a variety of reliability failure mechanisms, including hot-carriers, electromigration, and oxide breakdown. The system is normally integrated at the wafer level to predict the failure mechanisms of the production integrated circuits on the same wafer. 22 figs.

  1. Reliability Impacts in Life Support Architecture and Technology Selection

    NASA Technical Reports Server (NTRS)

    Lange, Kevin E.; Anderson, Molly S.

    2011-01-01

    Equivalent System Mass (ESM) and reliability estimates were performed for different life support architectures based primarily on International Space Station (ISS) technologies. The analysis was applied to a hypothetical 1-year deep-space mission. High-level fault trees were initially developed relating loss of life support functionality to the Loss of Crew (LOC) top event. System reliability was then expressed as the complement (nonoccurrence) this event and was increased through the addition of redundancy and spares, which added to the ESM. The reliability analysis assumed constant failure rates and used current projected values of the Mean Time Between Failures (MTBF) from an ISS database where available. Results were obtained showing the dependence of ESM on system reliability for each architecture. Although the analysis employed numerous simplifications and many of the input parameters are considered to have high uncertainty, the results strongly suggest that achieving necessary reliabilities for deep-space missions will add substantially to the life support system mass. As a point of reference, the reliability for a single-string architecture using the most regenerative combination of ISS technologies without unscheduled replacement spares was estimated to be less than 1%. The results also demonstrate how adding technologies in a serial manner to increase system closure forces the reliability of other life support technologies to increase in order to meet the system reliability requirement. This increase in reliability results in increased mass for multiple technologies through the need for additional spares. Alternative parallel architecture approaches and approaches with the potential to do more with less are discussed. The tall poles in life support ESM are also reexamined in light of estimated reliability impacts.

  2. 7 CFR 4290.620 - Requirements to obtain information from Portfolio Concerns.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the Enterprise to submit such financial statements, plans of operation (including intended use of financing proceeds), cash flow analyses, projections, and such economic development information about the... financial and economic development information. (1) The terms of each Financing must require the Portfolio...

  3. Reliability of risk assessment measures used in sexually violent predator proceedings.

    PubMed

    Miller, Cailey S; Kimonis, Eva R; Otto, Randy K; Kline, Suzonne M; Wasserman, Adam L

    2012-12-01

    The field interrater reliability of three assessment tools frequently used by mental health professionals when evaluating sex offenders' risk for reoffending--the Psychopathy Checklist-Revised (PCL-R), the Minnesota Sex Offender Screening Tool-Revised (MnSOST-R) and the Static-99-was examined within the context of sexually violent predator program proceedings. Rater agreement was highest for the Static--99 (intraclass correlation coefficient [ICC₁] = .78) and lowest for the PCL-R (ICC₁ = .60; MnSOST-R ICC₁ = .74), although all instruments demonstrated lower field reliability than that reported in their test manuals. Findings raise concerns about the reliability of risk assessment tools that are used to inform judgments of risk in high-stake sexually violent predator proceedings. Implications for future research and suggestions for improving evaluator training to increase accuracy when informing legal decision making are discussed.

  4. Informed consent: information or knowledge?

    PubMed

    Berger, Ken

    2003-01-01

    A fiduciary relationship should be nurtured between patient and physician. This requires effective communication throughout all aspects of care - especially pertaining to treatment decisions. In the context of illness as experienced by the patient a unique set of circumstances is presented. However, communication in an illness context is fraught with problems. The patient is vulnerable and the situation may be overwhelming. Voluminous amounts of information are available to patients from a host of health care providers, family members, support groups, advocacy centers, books, journals, and the internet. Often conflicting and confusion, frequently complex, this information may be of greater burden than benefit. Some information is of high validity and reliability while other information is of dubious reliability. The emotional freight of bad news may further inhibit understanding. An overload of information may pose an obstacle in decision-making. To facilitate the transformation of information into knowledge, the health care provider must act on some occasions as a filter, on other occasions as a conduit, and on still other occasions simply as a reservoir. The evolution of patient rights to receive or refuse treatment, the right to know or not to know calls for a change in processing of overwhelming information in our modem era. In this paper we will discuss the difference between information and knowledge. How can health care providers ensure they have given their patients all necessary and sufficient information to make an autonomous decision? How can they facilitate the transformation of information into knowledge? The effect of knowledge to consent allows a more focused, relevant and modern approach to choice in health care.

  5. Reliability Evaluation and Improvement Approach of Chemical Production Man - Machine - Environment System

    NASA Astrophysics Data System (ADS)

    Miao, Yongchun; Kang, Rongxue; Chen, Xuefeng

    2017-12-01

    In recent years, with the gradual extension of reliability research, the study of production system reliability has become the hot topic in various industries. Man-machine-environment system is a complex system composed of human factors, machinery equipment and environment. The reliability of individual factor must be analyzed in order to gradually transit to the research of three-factor reliability. Meanwhile, the dynamic relationship among man-machine-environment should be considered to establish an effective blurry evaluation mechanism to truly and effectively analyze the reliability of such systems. In this paper, based on the system engineering, fuzzy theory, reliability theory, human error, environmental impact and machinery equipment failure theory, the reliabilities of human factor, machinery equipment and environment of some chemical production system were studied by the method of fuzzy evaluation. At last, the reliability of man-machine-environment system was calculated to obtain the weighted result, which indicated that the reliability value of this chemical production system was 86.29. Through the given evaluation domain it can be seen that the reliability of man-machine-environment integrated system is in a good status, and the effective measures for further improvement were proposed according to the fuzzy calculation results.

  6. Neurology objective structured clinical examination reliability using generalizability theory

    PubMed Central

    Park, Yoon Soo; Lukas, Rimas V.; Brorson, James R.

    2015-01-01

    Objectives: This study examines factors affecting reliability, or consistency of assessment scores, from an objective structured clinical examination (OSCE) in neurology through generalizability theory (G theory). Methods: Data include assessments from a multistation OSCE taken by 194 medical students at the completion of a neurology clerkship. Facets evaluated in this study include cases, domains, and items. Domains refer to areas of skill (or constructs) that the OSCE measures. G theory is used to estimate variance components associated with each facet, derive reliability, and project the number of cases required to obtain a reliable (consistent, precise) score. Results: Reliability using G theory is moderate (Φ coefficient = 0.61, G coefficient = 0.64). Performance is similar across cases but differs by the particular domain, such that the majority of variance is attributed to the domain. Projections in reliability estimates reveal that students need to participate in 3 OSCE cases in order to increase reliability beyond the 0.70 threshold. Conclusions: This novel use of G theory in evaluating an OSCE in neurology provides meaningful measurement characteristics of the assessment. Differing from prior work in other medical specialties, the cases students were randomly assigned did not influence their OSCE score; rather, scores varied in expected fashion by domain assessed. PMID:26432851

  7. Neurology objective structured clinical examination reliability using generalizability theory.

    PubMed

    Blood, Angela D; Park, Yoon Soo; Lukas, Rimas V; Brorson, James R

    2015-11-03

    This study examines factors affecting reliability, or consistency of assessment scores, from an objective structured clinical examination (OSCE) in neurology through generalizability theory (G theory). Data include assessments from a multistation OSCE taken by 194 medical students at the completion of a neurology clerkship. Facets evaluated in this study include cases, domains, and items. Domains refer to areas of skill (or constructs) that the OSCE measures. G theory is used to estimate variance components associated with each facet, derive reliability, and project the number of cases required to obtain a reliable (consistent, precise) score. Reliability using G theory is moderate (Φ coefficient = 0.61, G coefficient = 0.64). Performance is similar across cases but differs by the particular domain, such that the majority of variance is attributed to the domain. Projections in reliability estimates reveal that students need to participate in 3 OSCE cases in order to increase reliability beyond the 0.70 threshold. This novel use of G theory in evaluating an OSCE in neurology provides meaningful measurement characteristics of the assessment. Differing from prior work in other medical specialties, the cases students were randomly assigned did not influence their OSCE score; rather, scores varied in expected fashion by domain assessed. © 2015 American Academy of Neurology.

  8. [Reliability of HOMA-IR for evaluation of insulin resistance during perioperative period].

    PubMed

    Fujino, Hiroko; Itoda, Shoko; Sako, Saori; Matsuo, Kazuki; Sakamoto, Eiji; Yokoyama, Takeshi

    2013-02-01

    Hyperglycemia due to increase in insulin resistance (IR) is often observed after surgery in spite of normal insulin secretion. To evaluate the degree of IR, the golden standard method is the normoglycemic hyperinsulinemic clamp technique (glucose clamp: GC). The GC using the artificial pancreas, STG-22 (Nikkiso, Tokyo, Japan), was established as a more reliable method, since it was evaluated during steady-state period under constant insulin infusion. Homeostasis model assessment insulin resistance (HOMA-IR), however, is frequently employed in daily practice because of its convenience. We, therefore, investigated the reliability of HOMA-IR in comparison with the glucose clamp using the STG-22. Eight healthy patients undergoing maxillofacial surgery were employed in this study after obtaining written informed consent. Their insulin resistance was evaluated by HOMA-IR and the GC using the STG-22 before and after surgery. HOMA-IR increased from 0.81 +/- 0.48 to 1.17 +/- 0.50, although there were no significant differences between before and after surgery. On the other hand, M-value by GC significantly decreased after surgery from 8.82 +/- 2.49 mg x kg(-1) x min(-1) to 3.84 +/- 0.79 mg x kg(-1) x min(-1) (P = 0.0003). In addition, no significant correlation was found between the values of HOMA-IR and the M-value by GC. HOMA-IR may not be reliable to evaluate IR for perioperative period.

  9. Statistics-related and reliability-physics-related failure processes in electronics devices and products

    NASA Astrophysics Data System (ADS)

    Suhir, E.

    2014-05-01

    The well known and widely used experimental reliability "passport" of a mass manufactured electronic or a photonic product — the bathtub curve — reflects the combined contribution of the statistics-related and reliability-physics (physics-of-failure)-related processes. When time progresses, the first process results in a decreasing failure rate, while the second process associated with the material aging and degradation leads to an increased failure rate. An attempt has been made in this analysis to assess the level of the reliability physics-related aging process from the available bathtub curve (diagram). It is assumed that the products of interest underwent the burn-in testing and therefore the obtained bathtub curve does not contain the infant mortality portion. It has been also assumed that the two random processes in question are statistically independent, and that the failure rate of the physical process can be obtained by deducting the theoretically assessed statistical failure rate from the bathtub curve ordinates. In the carried out numerical example, the Raleigh distribution for the statistical failure rate was used, for the sake of a relatively simple illustration. The developed methodology can be used in reliability physics evaluations, when there is a need to better understand the roles of the statistics-related and reliability-physics-related irreversible random processes in reliability evaluations. The future work should include investigations on how powerful and flexible methods and approaches of the statistical mechanics can be effectively employed, in addition to reliability physics techniques, to model the operational reliability of electronic and photonic products.

  10. Reliability model of disk arrays RAID-5 with data striping

    NASA Astrophysics Data System (ADS)

    Rahman, P. A.; D'K Novikova Freyre Shavier, G.

    2018-03-01

    Within the scope of the this scientific paper, the simplified reliability model of disk arrays RAID-5 (redundant arrays of inexpensive disks) and an advanced reliability model offered by the authors taking into the consideration nonzero time of the faulty disk replacement and different failure rates of disks in normal state of the disk array and in degraded and rebuild states are discussed. The formula obtained by the authors for calculation of the mean time to data loss (MTTDL) of the RAID-5 disk arrays on basis of the advanced model is also presented. Finally, the technique of estimation of the initial reliability parameters, which are used in the reliability model, and the calculation examples of the mean time to data loss of the RAID-5 disk arrays for the different number of disks are also given.

  11. Validation of Observations Obtained with a Liquid Mirror Telescope by Comparison with Sloan Digital Sky Survey Observations

    NASA Astrophysics Data System (ADS)

    Borra, E. F.

    2015-06-01

    The results of a search for peculiar astronomical objects using very low resolution spectra obtained with the NASA Orbital Debris Observatory (NODO) 3 m diameter liquid mirror telescope (LMT) are compared with results of spectra obtained with the Sloan Digital Sky Survey (SDSS). The main purpose of this comparison is to verify whether observations taken with this novel type of telescope are reliable. This comparison is important because LMTs are an inexpensive novel type of telescope that is very useful for astronomical surveys, particularly surveys in the time domain, and validation of the data taken with an LMT by comparison with data from a classical telescope will validate their reliability. We start from a published data analysis that classified as peculiar only 206 of the 18,000 astronomical objects observed with the NODO LMT. A total of 29 of these 206 objects were found in the SDSS. The reliability of the NODO data can be seen through the results of the detailed analysis that, in practice, incorrectly identified less than 0.3% of the 18,000 spectra as peculiar objects, most likely because they are variable stars. We conclude that the LMT gave reliable observations, comparable to those that would have been obtained with a telescope using a glass mirror.

  12. A reliability analysis framework with Monte Carlo simulation for weld structure of crane's beam

    NASA Astrophysics Data System (ADS)

    Wang, Kefei; Xu, Hongwei; Qu, Fuzheng; Wang, Xin; Shi, Yanjun

    2018-04-01

    The reliability of the crane product in engineering is the core competitiveness of the product. This paper used Monte Carlo method analyzed the reliability of the weld metal structure of the bridge crane whose limit state function is mathematical expression. Then we obtained the minimum reliable welding feet height value for the welds between cover plate and web plate on main beam in different coefficients of variation. This paper provides a new idea and reference for the growth of the inherent reliability of crane.

  13. Shared decision-making: is it time to obtain informed consent before radiologic examinations utilizing ionizing radiation? Legal and ethical implications.

    PubMed

    Berlin, Leonard

    2014-03-01

    Concerns about the possibility of developing cancer due to diagnostic imaging examinations utilizing ionizing radiation exposure are increasing. Research studies of survivors of atomic bomb explosions, nuclear reactor accidents, and other unanticipated exposures to similar radiation have led to varying conclusions regarding the stochastic effects of radiation exposure. That high doses of ionizing radiation cause cancer in humans is generally accepted, but the question of whether diagnostic levels of radiation cause cancer continues to be hotly debated. It cannot be denied that overexposure to ionizing radiation beyond a certain threshold, which has not been exactly determined, does generate cancer. This causes a dilemma: what should patients be informed about the possibility that a CT or similar examination might cause cancer later in life? At present, there is no consensus in the radiology community as to whether informed consent must be obtained from a patient before the patient undergoes a CT or similar examination. The author analyzes whether there is a legal duty mandating radiologists to obtain such informed consent but also, irrespective of the law, whether there an ethical duty that compels radiologists to inform patients of potential adverse effects of ionizing radiation. Over the past decade, there has been a noticeable shift from a benevolent, paternalistic approach to medical care to an autonomy-based, shared-decision-making approach, whereby patient and physician work as partners in determining what is medically best for the patient. Radiologists should discuss the benefits and hazards of imaging with their patients. Copyright © 2014. Published by Elsevier Inc.

  14. 13 CFR 107.620 - Requirements to obtain information from Portfolio Concerns.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and must be in English. (a) Information for initial Financing decision. Before extending any Financing... intended use of financing proceeds), cash flow analyses and projections as are necessary to support your investment decision. The information submitted must be consistent with the size and type of the business and...

  15. Effective Measurement of Reliability of Repairable USAF Systems

    DTIC Science & Technology

    2012-09-01

    Hansen presented a course, Concepts and Models for Repairable Systems Reliability, at the 2009 Centro de Investigacion en Mathematicas ( CIMAT ). The...recurrent event by calculating the mean quantity of recurrent events of the population of systems at risk at that point in time. The number of systems at... risk is the number of systems that are operating and providing information. [9] Information can be obscured by data censoring and truncation. One

  16. An audit of the reliability of influenza vaccination and medical information extracted from eHealth records in general practice.

    PubMed

    Regan, Annette K; Gibbs, Robyn A; Effler, Paul V

    2018-05-31

    To evaluate the reliability of information in general practice (GP) electronic health records (EHRs), 2100 adult patients were randomly selected for interview regarding the presence of specific medical conditions and recent influenza vaccination. Agreement between self-report and data extracted from EHRs was compared using Cohen's kappa coefficient (k) and interpreted in accordance with Altman's Kappa Benchmarking criteria; 377 (18%) patients declined participation, and 608 (29%) could not be contacted. Of 1115 (53%) remaining, 856 (77%) were active patients (≥3 visits to the GP practice in the last two years) who provided complete information for analysis. Although a higher proportion of patients self-reported being vaccinated or having a medical condition compared to the EHR (50.7% vs 36.9%, and 39.4% vs 30.3%, respectively), there was "good" agreement between self-report and EHR for both vaccination status (κ = 0.67) and medical conditions (κ = 0.66). These findings suggest EHR may be useful for public health surveillance. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

  17. 75 FR 71613 - Mandatory Reliability Standards for Interconnection Reliability Operating Limits

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-24

    ... Reliability Standards. The proposed Reliability Standards were designed to prevent instability, uncontrolled... Reliability Standards.\\2\\ The proposed Reliability Standards were designed to prevent instability... the SOLs, which if exceeded, could expose a widespread area of the bulk electric system to instability...

  18. A Bayesian Framework for Reliability Analysis of Spacecraft Deployments

    NASA Technical Reports Server (NTRS)

    Evans, John W.; Gallo, Luis; Kaminsky, Mark

    2012-01-01

    Deployable subsystems are essential to mission success of most spacecraft. These subsystems enable critical functions including power, communications and thermal control. The loss of any of these functions will generally result in loss of the mission. These subsystems and their components often consist of unique designs and applications for which various standardized data sources are not applicable for estimating reliability and for assessing risks. In this study, a two stage sequential Bayesian framework for reliability estimation of spacecraft deployment was developed for this purpose. This process was then applied to the James Webb Space Telescope (JWST) Sunshield subsystem, a unique design intended for thermal control of the Optical Telescope Element. Initially, detailed studies of NASA deployment history, "heritage information", were conducted, extending over 45 years of spacecraft launches. This information was then coupled to a non-informative prior and a binomial likelihood function to create a posterior distribution for deployments of various subsystems uSing Monte Carlo Markov Chain sampling. Select distributions were then coupled to a subsequent analysis, using test data and anomaly occurrences on successive ground test deployments of scale model test articles of JWST hardware, to update the NASA heritage data. This allowed for a realistic prediction for the reliability of the complex Sunshield deployment, with credibility limits, within this two stage Bayesian framework.

  19. 77 FR 39691 - Commission Information Collection Activities (FERC-725); Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-05

    ... information collection FERC-725, Certification of Electric Reliability Organization; Procedures for Electric Reliability Standards, to the Office of Management and Budget (OMB) for review of the information collection..., Certification of Electric Reliability Organization; Procedures for Electric Reliability Standards. OMB Control...

  20. Tracking reliability for space cabin-borne equipment in development by Crow model.

    PubMed

    Chen, J D; Jiao, S J; Sun, H L

    2001-12-01

    Objective. To study and track the reliability growth of manned spaceflight cabin-borne equipment in the course of its development. Method. A new technique of reliability growth estimation and prediction, which is composed of the Crow model and test data conversion (TDC) method was used. Result. The estimation and prediction value of the reliability growth conformed to its expectations. Conclusion. The method could dynamically estimate and predict the reliability of the equipment by making full use of various test information in the course of its development. It offered not only a possibility of tracking the equipment reliability growth, but also the reference for quality control in manned spaceflight cabin-borne equipment design and development process.