A link between occupant and vehicle accelerations during common driving tasks.

PubMed

Mathias, Anne C; Shibata, Peggy A; Sprague, James K

2014-01-01

When evaluating occupant motions during driving tasks, it is desirable to have a well-established correlation between vehicle and occupant accelerations. Therefore, this study demonstrated a methodology to quantify accelerations experienced by the driver of a passenger vehicle and compare them to associated vehicle motions. Acceleration levels were measured at the seat and the driver’s head, cervical spine, and lumbar spine during six non-collision driving tasks. Tasks included mounting a 127 mm (5 in) -high curb, crossing railroad tracks, driving on a rough road, braking heavily from 13.4 m/s (30 mph), having a 89 mm (3.5 in)-diameter roller sequentially pass under two tires, and dropping one tire from a 171-mm (6.75 in) height. The driver experienced peak resultant accelerations of similar magnitudes across all trials. Peak body accelerations were less than 1.2 g, including 0.82 g lumbar acceleration during heavy braking and 0.88 g head acceleration during the curb mount. These preliminary measurements are comparable to or lower than accelerations experienced during non-driving activities such as sitting quickly. This study contributes to the scientific understanding of accelerations experienced by vehicle occupants and demonstrates the potential to relate vehicle and occupant accelerations during common driving activities that do not involve collisions.

1977 Nationwide Personal Transportation Study : vehicle occupancy

DOT National Transportation Integrated Search

1981-04-01

This report is part of a series that presents findings from the 1977 Nationwide Personal Transportation Study (NPTS). This report contains average vehicle occupancy rates by trip characteristics (trip purpose, trip length, time of day and day of the ...

2007 motor vehicle occupant safety survey. Volume 1, Methodology report

DOT National Transportation Integrated Search

2008-07-01

The 2007 Motor Vehicle Occupant Safety Survey was the sixth in a series of periodic national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by Sc...

2003 motor vehicle occupant safety survey. Volume 1, Methodology report

DOT National Transportation Integrated Search

2003-09-01

The 2003 Motor Vehicle Occupant Safety Survey was the fifth in a series of biennial national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration. The survey used two questionnaires, each ad...

Preventing passenger vehicle occupant injuries by vehicle design--a historical perspective from IIHS.

PubMed

O'Neill, Brian

2009-04-01

Motor vehicle crashes result in some 1.2 million deaths and many more injuries worldwide each year and is one of the biggest public health problems facing societies today. This article reviews the history of, and future potential for, one important countermeasure-designing vehicles that reduce occupant deaths and injuries. For many years, people had urged automakers to add design features to reduce crash injuries, but it was not until the mid-1960s that the idea of pursuing vehicle countermeasures gained any significant momentum. In 1966, the U.S. Congress passed the National Traffic and Motor Vehicle Safety Act, requiring the government to issue a comprehensive set of vehicle safety standards. This was the first broad set of requirements issued anywhere in the world, and within a few years similar standards were adopted in Europe and Australia. Early vehicle safety standards specified a variety of safety designs resulting in cars being equipped with lap/shoulder belts, energy-absorbing steering columns, crash-resistant door locks, high-penetration-resistant windshields, etc. Later, the standards moved away from specifying particular design approaches and instead used crash tests and instrumented dummies to set limits on the potential for serious occupant injuries by crash mode. These newer standards paved the way for an approach that used the marketplace, in addition to government regulation, to improve vehicle safety designs-using crash tests and instrumented dummies to provide consumers with comparative safety ratings for new vehicles. The approach began in the late 1970s, when NHTSA started publishing injury measures from belted dummies in new passenger vehicles subjected to frontal barrier crash tests at speeds somewhat higher than specified in the corresponding regulation. This program became the world's first New Car Assessment Program (NCAP) and rated frontal crashworthiness by awarding stars (five stars being the best and one the worst) derived from head

Effective public communication and marketing of high-occupancy-vehicle lanes : an agency perspective

DOT National Transportation Integrated Search

1997-01-01

The Massachusetts Highway Department (MassHighway) opened the Southeast Expressway high-occupancy-vehicle (HOV) lane on November 15, 1995. The 6-mi (9.6-km) contraflow lane, open to vehicles with at least three occupants, was MassHighways third at...

Implications of Vehicle Roll Direction on Occupant Ejection and Injury Risk

PubMed Central

Gloeckner, D. Claire; Moore, Tara L. A.; Steffey, Duane; Bare, Cleve; Corrigan, Catherine Ford

2006-01-01

Vehicle roll direction and occupant position have been shown to affect occupant kinematics. Data from NASS-CDS were analyzed for risk of serious or greater injuries and ejection with respect to the position of the occupant (near side or far side). The risk of AIS 3+ injuries was higher for unrestrained occupants, for ejected occupants, for occupants involved in rollovers with higher numbers of quarter turns, and for far side occupants. Near side occupants had an increased risk of partial ejection in rollovers consisting of one complete roll or less. Occupant roll direction did not affect risk of complete ejection. PMID:16968635

Thoracic injuries to contained and restrained occupants in single-vehicle pure rollover crashes.

PubMed

Bambach, M R; Grzebieta, R H; McIntosh, A S

2013-01-01

Around one in three contained and restrained seriously injured occupants in single-vehicle pure rollover crashes receive a serious injury to the thorax. With dynamic rollover test protocols currently under development, there is a need to understand the nature and cause of serious thoracic injuries incurred in rollover events. This will allow decisions to be made with regards to adoption of a suitable crash test dummy and appropriate thoracic injury criteria in such protocols. Valid rollover occupant protection test protocols will lead to vehicle improvements that will reduce the high trauma burden of vehicle rollover crashes. This paper presents an analysis of contained and restrained occupants involved in single-vehicle pure rollover crashes that occurred in the United States between 2000 and 2009 (inclusive). Serious thoracic injury typology and causality are determined. A logistic regression model is developed to determine associations between the incidence of serious thoracic injury and the human, vehicle and environmental characteristics of the crashes. Recommendations are made with regards to the appropriate assessment of potential thoracic injury in dynamic rollover occupant protection crash test protocols. Copyright © 2012 Elsevier Ltd. All rights reserved.

Vehicle occupant exposure to carbon monoxide.

PubMed

Koushki, P A; al-Dhowalia, K H; Niaizi, S A

1992-12-01

This paper focuses on the auto commuting micro-environment and presents typical carbon monoxide (CO) concentrations to which auto commuters in central Riyadh, Saudi Arabia were exposed. Two test vehicles traveling over four main arterial roadways were monitored for inside and outside CO levels during eighty peak and off-peak hours extending over an eight-month period. The relative importance of several variables which explained the variability in CO concentrations inside autos was also assessed. It was found that during peak hours auto commuters were exposed to mean CO levels that ranged from 30 to 40 ppm over trips that typically took between 25 to 40 minutes. The mean ratio of inside to outside CO levels was 0.84. Results of variance component analyses indicated that the most important variables affecting CO concentrations inside autos were, in addition to the smoking of vehicle occupants, traffic volume, vehicle speed, period of day and wind velocity. An increase in traffic volume from 1,000 to 5,000 vehicles per hour (vph) increased mean CO level exposure by 71 percent. An increase in vehicle speed from 14 to 55 km/h reduced mean CO exposure by 36 percent. The number of traffic interruptions had a moderate effect on mean concentrations of CO inside vehicles.

2007 motor vehicle occupant safety survey. Volume 3, air bags report

DOT National Transportation Integrated Search

2008-11-01

The 2007 Motor Vehicle Occupant Safety Survey was the sixth in a series of periodic national telephone surveys on occupant : protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted : b...

Asphyxia: a rare cause of death for motor vehicle crash occupants.

PubMed

Conroy, Carol; Stanley, Christina; Eastman, A Brent; Vaughan, Teresa; Vilke, Gary M; Hoyt, David B; Pacyna, Sharon; Smith, Alan

2008-03-01

Motor vehicle related trauma is one of the leading causes of traumatic death. Although most of these deaths are because of severe blunt force trauma, there are people without severe injury who die of asphyxia related to the motor vehicle collision. There were 37 deaths because of motor vehicle related asphyxia in San Diego County during 1995-2004. Almost half (48.6%) of these deaths were because of compression asphyxia, 29.7% were positional asphyxia deaths, and 16.2% died of a combination of compression and positional asphyxia. We were unable to classify the mechanism of asphyxia for the remaining 5.4% of asphyxia deaths. Almost all occupants dying from asphyxia were involved in rollover crashes and may have been incapacitated by obesity, drug or alcohol intoxication, or blunt force trauma. Compression asphyxia deaths occurred both from vehicle crush with intrusion into the passenger compartment and from ejection of the occupant and subsequent crushing by the vehicle. Positional asphyxia occurred in positions interfering with normal respiration, including inversion. None of the occupants had injury severe enough to result in death at the scene if they had not first died of asphyxia. This study suggests classifying the mechanism of asphyxia for these fatalities may be a challenge to forensic pathologists who seldom see these rare deaths.

2007 motor vehicle occupant safety survey. Volume 2, Seat belt report

DOT National Transportation Integrated Search

2008-07-01

The 2007 Motor Vehicle Occupant Safety Survey was the sixth in a series of periodic national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by Sc...

2000 motor vehicle occupant safety survey. Volume 2, Seat belt report

DOT National Transportation Integrated Search

2001-11-01

The 2000 Motor Vehicle Occupant Safety Survey was the fourth in a series of biennial national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by t...

2000 motor vehicle occupant safety survey. Volume 3, Air bags report

DOT National Transportation Integrated Search

2001-09-01

The 2000 Motor Vehicle Occupant Safety Survey was the fourth in a series of biennial national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by S...

2003 motor vehicle occupant safety survey. Volume 2, Safety belt report

DOT National Transportation Integrated Search

2003-09-01

The 2003 Motor Vehicle Occupant Safety Survey was the fifth in a series of biennial national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by Sc...

Pelvic ring fractures: implications of vehicle design, crash type, and occupant characteristics.

PubMed

Rowe, Stephen A; Sochor, Mark S; Staples, Kurtis S; Wahl, Wendy L; Wang, Stewart C

2004-10-01

Pelvic ring fractures (PRFs) are a major cause of morbidity and mortality in motor vehicle collisions (MVCs). Understanding the factors leading to PRFs may help improve vehicle design and safety. This study sought to determine the vehicular, crash, and occupant characteristics that contribute to PRFs. From 1997 to 2003, 240 adult patients involved in lateral or frontal crashes were prospectively studied. Comprehensive crash reconstructions, vehicle analysis, and occupant data were compiled and analyzed as part of the national Crash Injury Research Engineering Network project. Of 240 study patients, 38 had PRFs. The incidence of PRFs was significantly associated with female gender, lateral impact crashes, vehicle incompatibility, and severity of crash. Seat belts and airbags were not protective against PRFs in either lateral or frontal crashes. All vehicles in the current study were less than 6 years old at the time of the MVC and thus reflect newer safety designs. Compared with studies of PRFs in MVCs before the widespread adoption of modern safety standards, our series suggests there has been a modest decrease in the incidence of PRFs in newer vehicles. Current safety standards do not adequately protect against PRFs, especially in lateral MVCs involving incompatibility and female occupants. New technology needs to be developed and implemented. Our data suggest that side impact airbags, alteration of vehicle geometry, and increased reinforcement of side panels and doors may result in fewer PRFs.

Evaluation of New York state's mandatory occupant restraint law : fatalities and injuries among motor vehicle occupants covered by the law

DOT National Transportation Integrated Search

1987-02-01

The report focuses on the ultimate measure of the effectiveness of New York State's Mandatory Occupant Restraint Law: reductions in fatalities and serious injuries among vehicle occupants. All front seat occupants and children under the age of ten, r...

A CLIPS-based tool for aircraft pilot-vehicle interface design

NASA Technical Reports Server (NTRS)

Fowler, Thomas D.; Rogers, Steven P.

1991-01-01

The Pilot-Vehicle Interface of modern aircraft is the cognitive, sensory, and psychomotor link between the pilot, the avionics modules, and all other systems on board the aircraft. To assist pilot-vehicle interface designers, a C Language Integrated Production System (CLIPS) based tool was developed that allows design information to be stored in a table that can be modified by rules representing design knowledge. Developed for the Apple Macintosh, the tool allows users without any CLIPS programming experience to form simple rules using a point and click interface.

Using in-depth investigations to identify transportation safety issues for wheelchair-seated occupants of motor vehicles.

PubMed

Schneider, Lawrence W; Klinich, Kathleen D; Moore, Jamie L; MacWilliams, Joel B

2010-04-01

In-depth investigations of motor-vehicle crashes involve detailed inspection, measurement, and photodocumentation of vehicle exterior and interior damage, evidence of belt-restraint use, and evidence of occupant contacts with the vehicle interior. Results of in-depth investigations thereby provide the most objective way to identify current and emerging injury problems and issues in occupant safety and crash protection, and provide important feedback on the real-world performance of the latest restraint-system and vehicle crashworthiness technologies. To provide an objective understanding of real-world transportation safety issues for wheelchair-seated travelers, the University of Michigan Transportation Research Institute (UMTRI) has been conducting and assembling data from in-depth investigations of motor-vehicle crashes and non-crash adverse moving-vehicle incidents, such as emergency vehicle braking, turning, and swerving, in which there was at least one vehicle occupant sitting in a wheelchair. The results of 39 investigations involving 42 wheelchair-seated occupants have been assembled and entered into a wheelchair-occupant crash/injury database. In addition, a biomechanical analysis of each case has been performed to identify key safety issues for wheelchair-seated travelers. The wheelchairs of 34 of the 42 occupants who were seated in wheelchairs while traveling in motor vehicles were effectively secured by either a four-point, strap-type tiedown system or a docking securement device, and all but one of these properly secured wheelchairs remained in place during the crash or non-collision event. However, 30 of the 42 occupants were improperly restrained, either because of non-use or incomplete use of available belt restraints, or because the belt restraints were improperly positioned on the occupant's body. Twenty-six of the 42 occupants sustained significant injuries and 10 of these occupants died as a direct result of injuries sustained, or from

Design and optimization for the occupant restraint system of vehicle based on a single freedom model

NASA Astrophysics Data System (ADS)

Zhang, Junyuan; Ma, Yue; Chen, Chao; Zhang, Yan

2013-05-01

Throughout the vehicle crash event, the interactions between vehicle, occupant, restraint system (VOR) are complicated and highly non-linear. CAE and physical tests are the most widely used in vehicle passive safety development, but they can only be done with the detailed 3D model or physical samples. Often some design errors and imperfections are difficult to correct at that time, and a large amount of time will be needed. A restraint system concept design approach which based on single-degree-of-freedom occupant-vehicle model (SDOF) is proposed in this paper. The interactions between the restraint system parameters and the occupant responses in a crash are studied from the view of mechanics and energy. The discrete input and the iterative algorithm method are applied to the SDOF model to get the occupant responses quickly for arbitrary excitations (impact pulse) by MATLAB. By studying the relationships between the ridedown efficiency, the restraint stiffness, and the occupant response, the design principle of the restraint stiffness aiming to reduce occupant injury level during conceptual design is represented. Higher ridedown efficiency means more occupant energy absorbed by the vehicle, but the research result shows that higher ridedown efficiency does not mean lower occupant injury level. A proper restraint system design principle depends on two aspects. On one hand, the restraint system should lead to as high ridedown efficiency as possible, and at the same time, the restraint system should maximize use of the survival space to reduce the occupant deceleration level. As an example, an optimization of a passenger vehicle restraint system is designed by the concept design method above, and the final results are validated by MADYMO, which is the most widely used software in restraint system design, and the sled test. Consequently, a guideline and method for the occupant restraint system concept design is established in this paper.

Crew Exploration Vehicle (CEV) (Orion) Occupant Protection. Part 1; Appendices

NASA Technical Reports Server (NTRS)

Currie-Gregg, Nancy J.; Gernhardt, Michael L.; Lawrence, Charles; Somers, Jeffrey T.

2016-01-01

Dr. Nancy J. Currie, of the NASA Engineering and Safety Center (NESC), Chief Engineer at Johnson Space Center (JSC), requested an assessment of the Crew Exploration Vehicle (CEV) occupant protection as a result of issues identified by the Constellation Program and Orion Project. The NESC, in collaboration with the Human Research Program (HRP), investigated new methods associated with occupant protection for the Crew Exploration Vehicle (CEV), known as Orion. The primary objective of this assessment was to investigate new methods associated with occupant protection for the CEV, known as Orion, that would ensure the design provided minimal risk to the crew during nominal and contingency landings in an acceptable set of environmental and spacecraft failure conditions. This documents contains the appendices to the NESC assessment report. NASA/TM-2013-217380, Application of the Brinkley Dynamic Response Criterion to Spacecraft Transient Dynamic Events supersedes this document.

7th National Conference on High-Occupancy Vehicle Systems : HOV systems in a new light

DOT National Transportation Integrated Search

1995-07-01

These proceedings of the 7th National Conference on High-Occupancy Vehicle Systems, held at the Bilmore Hotel in Los Angeles, California June 5-8, 1994 focus on the High Occupancy Vehicle (HOV) system in California; experiences from the Northridge Ea...

High occupancy vehicle (HOV) lane management system : amendment A.

DOT National Transportation Integrated Search

2011-12-01

This report describes a system designed to provide Single Occupancy Hybrid Vehicles (SOHVs) restriction : messages dynamically to drivers through variable message signs. This system will allow California to : comply with federal requirements (that Si...

2007 motor vehicle occupant safety survey. Volume 5, Child safety seat report

DOT National Transportation Integrated Search

2009-04-01

The 2007 Motor Vehicle Occupant Safety Survey (MVOSS) was the sixth in a series of periodic national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conduct...

2000 motor vehicle occupant safety survey. Volume 5, Child safety seat report

DOT National Transportation Integrated Search

2002-06-01

The 2000 Motor Vehicle Occupant Safety Survey was the fourth in a series of biennial national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by S...

1998 Motor Vehicle Occupant Safety Survey. Volume 3, Child safety seat report

DOT National Transportation Integrated Search

2000-07-01

The 1998 Motor Vehicle Occupant Safety Survey was the third in a series of biennial national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by th...

Optimization of vehicle deceleration to reduce occupant injury risks in frontal impact.

PubMed

Mizuno, Koji; Itakura, Takuya; Hirabayashi, Satoko; Tanaka, Eiichi; Ito, Daisuke

2014-01-01

In vehicle frontal impacts, vehicle acceleration has a large effect on occupant loadings and injury risks. In this research, an optimal vehicle crash pulse was determined systematically to reduce injury measures of rear seat occupants by using mathematical simulations. The vehicle crash pulse was optimized based on a vehicle deceleration-deformation diagram under the conditions that the initial velocity and the maximum vehicle deformation were constant. Initially, a spring-mass model was used to understand the fundamental parameters for optimization. In order to investigate the optimization under a more realistic situation, the vehicle crash pulse was also optimized using a multibody model of a Hybrid III dummy seated in the rear seat for the objective functions of chest acceleration and chest deflection. A sled test using a Hybrid III dummy was carried out to confirm the simulation results. Finally, the optimal crash pulses determined from the multibody simulation were applied to a human finite element (FE) model. The optimized crash pulse to minimize the occupant deceleration had a concave shape: a high deceleration in the initial phase, low in the middle phase, and high again in the final phase. This crash pulse shape depended on the occupant restraint stiffness. The optimized crash pulse determined from the multibody simulation was comparable to that from the spring-mass model. From the sled test, it was demonstrated that the optimized crash pulse was effective for the reduction of chest acceleration. The crash pulse was also optimized for the objective function of chest deflection. The optimized crash pulse in the final phase was lower than that obtained for the minimization of chest acceleration. In the FE analysis of the human FE model, the optimized pulse for the objective function of the Hybrid III chest deflection was effective in reducing rib fracture risks. The optimized crash pulse has a concave shape and is dependent on the occupant restraint

Daytime and nighttime seat belt use by fatally injured passenger vehicle occupants.

DOT National Transportation Integrated Search

2010-07-01

The difference in day and night seat belt use among fatally injured passenger vehicle occupants was : investigated by personal, environmental, and vehicle characteristics. In each of the 10 years reviewed, seat belt : use among fatally injured occupa...

Biomechanical analysis of occupant kinematics in rollover motor vehicle accidents: dynamic spit test.

PubMed

Sances, Anthony; Kumaresan, Srirangam; Clarke, Richard; Herbst, Brian; Meyer, Steve

2005-01-01

A better understanding of occupant kinematics in rollover accidents helps to advance biomechanical knowledge and to enhance the safety features of motor vehicles. While many rollover accident simulation studies have adopted the static approach to delineate the occupant kinematics in rollover accidents, very few studies have attempted the dynamic approach. The present work was designed to study the biomechanics of restrained occupants during rollover accidents using the steady-state dynamic spit test and to address the importance of keeping the lap belt fastened. Experimental tests were conducted using an anthropometric 50% Hybrid III dummy in a vehicle. The vehicle was rotated at 180 degrees/second and the dummy was restrained using a standard three-point restraint system. The lap belt of the dummy was fastened either by using the cinching latch plate or by locking the retractor. Three configurations of shoulder belt harness were simulated: shoulder belt loose on chest with cinch plate, shoulder belt under the left arm and shoulder belt behind the chest. In all tests, the dummy stayed within the confinement of the vehicle indicating that the securely fastened lap belt holds the dummy with dynamic movement of 3 1/2" to 4". The results show that occupant movement in rollover accidents is least affected by various shoulder harness positions with a securely fastened lap belt. The present study forms a first step in delineating the biomechanics of occupants in rollover accidents.

75 FR 6123 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... motor vehicle safety standard is in effect under this chapter, a State or a political subdivision of a... [Docket No. NHTSA-2009-0156] RIN 2127-AK57 Federal Motor Vehicle Safety Standards; Occupant Crash...'s response to petitions for reconsideration of a November 12, 2008 final rule that amended the child...

Wheelchair tiedown and occupant restraint practices in paratransit vehicles

PubMed Central

Smalley, Craig

2018-01-01

The purpose of this study was to characterize wheelchair tiedown and occupant restraint system (WTORS) usage in paratransit vehicles based on observations of wheelchair and scooter (wheeled mobility devices, collectively, “WhMD”) passenger trips. A retrospective review of on-board video monitoring recordings of WhMD trips was conducted. Four hundred seventy-five video recordings were collected for review and analysis. The use of all four tiedowns to secure the WhMD was observed more frequently for power WhMDs (82%) and manual WhMDs (80%) compared to scooters (39%), and this difference was significant (p< 0.01). Nonuse or misuse of the occupant restraint system occurred during 88% of WhMD trips, and was most frequently due to vehicle operator neglect in applying the shoulder belt. Despite the absence of incidents or injuries in this study, misuse and nonuse of WTORS potentially place WhMD seated passengers at higher risk of injury during transit. These findings support the need for improved vehicle operator training and passenger education on the proper use of WTORS and development of WTORS with improved usability and/or alternative technologies that can be automated or used independently. PMID:29304035

Wheelchair tiedown and occupant restraint practices in paratransit vehicles.

PubMed

Frost, Karen; Bertocci, Gina; Smalley, Craig

2018-01-01

The purpose of this study was to characterize wheelchair tiedown and occupant restraint system (WTORS) usage in paratransit vehicles based on observations of wheelchair and scooter (wheeled mobility devices, collectively, "WhMD") passenger trips. A retrospective review of on-board video monitoring recordings of WhMD trips was conducted. Four hundred seventy-five video recordings were collected for review and analysis. The use of all four tiedowns to secure the WhMD was observed more frequently for power WhMDs (82%) and manual WhMDs (80%) compared to scooters (39%), and this difference was significant (p< 0.01). Nonuse or misuse of the occupant restraint system occurred during 88% of WhMD trips, and was most frequently due to vehicle operator neglect in applying the shoulder belt. Despite the absence of incidents or injuries in this study, misuse and nonuse of WTORS potentially place WhMD seated passengers at higher risk of injury during transit. These findings support the need for improved vehicle operator training and passenger education on the proper use of WTORS and development of WTORS with improved usability and/or alternative technologies that can be automated or used independently.

Lost working days, productivity, and restraint use among occupants of motor vehicles that crashed in the United States.

PubMed

Ebel, B E; Mack, C; Diehr, P; Rivara, F P

2004-10-01

In 2001, 6.3 million passengers were involved in motor vehicle crashes. This study aimed to determine the number of work days lost as a result of motor vehicle crashes and factors that influenced people's return to work. This was a retrospective, population based cohort study of occupants in motor vehicles involved in crashes from the 1993-2001 Crashworthiness Data System produced by the National Highway Traffic Safety Administration. The sample population of people aged 18-65 years included two groups: occupants who survived and were working before the crash and occupants who were injured fatally and were estimated to have been working before the crash. Multivariate linear regression was used to analyze the impact of restraint use and injury type on return to work. Overall, 30.1% of occupants of vehicles that crashed missed one or more days of work. A crash resulted in a mean 28.0 (95% confidence interval 15.8 to 40.1) days lost from work, including losses associated with fatalities. The 2.1 million working occupants of vehicles that crashed in 2001 lost a total of 60 million days of work, resulting in annual productivity losses of over $7.5 billion (2964 to 12 075). Unrestrained vehicle occupants accounted for $5.6 billion in lost productivity. Motor vehicle crashes result in large and potentially preventable productive losses that are mostly attributable to fatal injuries.

Crash safety concerns for out-of-position occupant postures: A look toward safety in highly automated vehicles.

PubMed

McMurry, Timothy L; Poplin, Gerald S; Shaw, Greg; Panzer, Matthew B

2018-04-09

Highly automated vehicle occupants will all be passengers and may be free to ride while in postures for which existing occupant safety systems such as seat belts and airbags were not originally designed. These occupants could therefore face increased risk of injury when a crash occurs. Given that current vehicles are capable of supporting a variety of occupant postures outside of the normal design position, such as reclined or turned passengers, an evaluation of current field data was performed to better understand the risks of being out of position. We investigated the frequency, demographics, and injury outcomes for out-of-position occupants using NASS-CDS. A matched analysis was performed to compare injury outcomes for out-of-position passengers with in-position drivers involved in similar crashes. Finally, case studies for out-of-position occupants were examined in the Crash Injury Research (CIREN) database. Only 0.5% of occupants in NASS-CDS with a coded posture were out of position at the time of crash. Of the out-of-position occupants, being turned or seated sideways was almost as likely as being reclined. Out-of-position occupants were younger and less likely to be belted than their in-position counterparts. Analysis of the injury data indicated a trend that being out of position was associated with an elevated risk for serious injury. However, the number of out-of-position occupants was too small to provide a definitive or statistically significant conclusion on injury outcome. Though highly automated vehicles may eventually reduce the number of crashes and traffic fatalities in the future, there will be a transition period when these vehicles remain at risk from collisions with human-driven vehicles. These crashes could cause higher than anticipated rates of injury if occupants are less likely to be belted or tend to be in positions for which restraints are not optimized. This study highlights the need for future research on occupant response and

1996 motor vehicle occupant safety survey. Volume 3, Seat belts

DOT National Transportation Integrated Search

1997-08-14

The National Highway Traffic Safety Administration (NHTSA) commissioned the research firm of Schulman, Ronca & Bucuvalas, Inc. (SRBI) to conduct the 1996 Motor Vehicle Occupant Safety Survey. Between November 4, 1996 and January 5, 1997 SRBI conducte...

Motor Vehicle and Machinery Repairers. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on motor vehicle and machinery repairers, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include automobile body repairers,…

1996 motor vehicle occupant safety survey. Volume 5, Car seats

DOT National Transportation Integrated Search

1997-12-22

The National Highway Traffic Safety Administration (NHTSA) commissioned the research firm of Schulman, Ronca and Bucavalas, Inc. (SRBI) to conduct the 1996 Motor Vehicle Occupant Safety Survey. Between November 4, 1996 and January 5, 1997 SRBI conduc...

78 FR 70415 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-25

...Completing the first initiative of NHTSA's 2007 ``NHTSA's Approach to Motorcoach Safety'' plan and one of the principal undertakings of DOT's 2009 Motorcoach Safety Action Plan, and fulfilling a statutory mandate of the Motorcoach Enhanced Safety Act of 2012, incorporated into the Moving Ahead for Progress in the 21st Century Act, this final rule amends the Federal motor vehicle safety standard (FMVSS) on occupant crash protection to require lap/shoulder seat belts for each passenger seating position in all new over-the-road buses, and in new buses other than over-the-road buses with a gross vehicle weight rating (GVWR) greater than 11,793 kilograms (kg) (26,000 pounds (lb), with certain exclusions. By requiring the passenger lap/ shoulder seat belts, this final rule significantly reduces the risk of fatality and serious injury in frontal crashes and the risk of occupant ejection in rollovers, thus considerably enhancing the safety of these vehicles.

Occupational exposure assessment of highway toll station workers to vehicle engine exhaust.

PubMed

Belloc-Santaliestra, Miriam; van der Haar, Rudolf; Molinero-Ruiz, Emilia

2015-01-01

Toll station workers are occupationally exposed to vehicle engine exhaust, a complex mixture of different chemical substances, including carcinogenic compounds. Therefore, a study was carried out on attendants of two highway toll stations to describe their occupational exposure to vehicle engine exhaust, based on a worst-case scenario approach. Personal sampling was conducted during the day shift for all attendants, testing for three groups of chemical substances: polycyclic aromatic hydrocarbons (PAHs), volatile organic compounds (VOCs) and aldehydes (formaldehyde and acrolein). Concentrations of total PAH, BTEX (benzene, toluene, ethylbenzene, and xylenes) and formaldehyde content varied between 97.60-336.08 ng/m3, 5.01-40.52 μg/m3, and 0.06-19.13 μg/m3, respectively. No clear relationships could be established between exposure levels and the number of vehicles. Furthermore, no differences were found between truck versus car lanes, or inside versus outside the tollbooth. Not all the detected VOCs were related to vehicle exhaust; some were consistent with the use of cleaning products. The measured concentrations were far below the established occupational exposure limits, but tended to be higher than values reported for outdoor urban environments. There are very few international studies assessing occupational exposures among toll station workers, and this is the first such study to be conducted in Spain. The results suggest that further, more detailed studies are necessary to characterize exposure properly, and ones which include other airborne pollutants, such as ultrafine particles. The comparison of the results to other similar studies was difficult, since no data related to some important exposure determinants have been provided. Therefore, it is recommended that these determinants be considered in future studies.

Evaluation of Different Speech and Touch Interfaces to In-Vehicle Music Retrieval Systems

PubMed Central

Garay-Vega, L.; Pradhan, A. K.; Weinberg, G.; Schmidt-Nielsen, B.; Harsham, B.; Shen, Y.; Divekar, G.; Romoser, M.; Knodler, M.; Fisher, D. L.

2010-01-01

In-vehicle music retrieval systems are becoming more and more popular. Previous studies have shown that they pose a real hazard to drivers when the interface is a tactile one which requires multiple entries and a combination of manual control and visual feedback. Voice interfaces exist as an alternative. Such interfaces can require either multiple or single conversational turns. In this study, each of 17 participants between the ages of 18 and 30 years old was asked to use three different music-retrieval systems (one with a multiple entry touch interface, the iPod™, one with a multiple turn voice interface, interface B, and one with a single turn voice interface, interface C) while driving through a virtual world. Measures of secondary task performance, eye behavior, vehicle control, and workload were recorded. When compared with the touch interface, the voice interfaces reduced the total time drivers spent with their eyes off the forward roadway, especially in prolonged glances, as well as both the total number of glances away from the forward roadway and the perceived workload. Furthermore, when compared with driving without a secondary task, both voice interfaces did not significantly impact hazard anticipation, the frequency of long glances away from the forward roadway, or vehicle control. The multiple turn voice interface (B) significantly increased both the time it took drivers to complete the task and the workload. The implications for interface design and safety are discussed. PMID:20380920

1998 motor vehicle occupant safety survey. Volume 1, methodology report

DOT National Transportation Integrated Search

2000-03-01

This is the Methodology Report for the 1998 Motor Vehicle Occupant Safety Survey. The survey is conducted on a biennial basis (initiated in 1994), and is administered by telephone to a randomly selected national sample. Two questionnaires are used, e...

Occupant and crash characteristics for case occupants with cervical spine injuries sustained in motor vehicle collisions.

PubMed

Stein, Deborah M; Kufera, Joseph A; Ho, Shiu M; Ryb, Gabriel E; Dischinger, Patricia C; O'Connor, James V; Scalea, Thomas M

2011-02-01

Motor vehicle collisions (MVCs) are the leading cause of spine and spinal cord injuries in the United States. Traumatic cervical spine injuries (CSIs) result in significant morbidity and mortality. This study was designed to evaluate both the epidemiologic and biomechanical risk factors associated with CSI in MVCs by using a population-based database and to describe occupant and crashes characteristics for a subset of severe crashes in which a CSI was sustained as represented by the Crash Injury Research Engineering Network (CIREN) database. Prospectively collected CIREN data from the eight centers were used to identify all case occupants between 1996 and November 2009. Case occupants older than 14 years and case vehicles of the four most common vehicle types were included. The National Automotive Sampling System's Crashworthiness Data System, a probability sample of all police-reported MVCs in the United States, was queried using the same inclusion criteria between 1997 and 2008. Cervical spinal cord and spinal column injuries were identified using Abbreviated Injury Scale (AIS) score codes. Data were abstracted on all case occupants, biomechanical crash characteristics, and injuries sustained. Univariate analysis was performed using a χ analysis. Logistic regression was used to identify significant risk factors in a multivariate analysis to control for confounding associations. CSIs were identified in 11.5% of CIREN case occupants. Case occupants aged 65 years or older and those occupants involved in rollover crashes were more likely to sustain a CSI. In univariate analysis of the subset of severe crashes represented by CIREN, the use of airbag and seat belt together (reference) were more protective than seat belt alone (odds ratio [OR]=1.73, 95% confidence interval [CI]=1.32-2.27) or the use of neither restraint system (OR=1.45, 95% CI=1.02-2.07). The most frequent injury sources in CIREN crashes were roof and its components (24.8%) and noncontact sources (15

High occupancy vehicle project case studies : historical trends and project experiences

DOT National Transportation Integrated Search

1992-08-01

High-occupancy vehicle (HOV) facilities represent one approach being used in many metropolitan areas today to respond to increasing traffic congestion, declining mobility levels, air quality and environmental concerns, and limited resources. HOV faci...

Reduced Protection for Belted Occupants in Rear Seats Relative to Front Seats of New Model Year Vehicles

PubMed Central

Sahraei, Elham; Digges, Kennerly; Marzougui, Dhafer

2010-01-01

Effectiveness of the rear seat in protecting occupants of different age groups in frontal crashes for 2000–2009 model years (MY) of vehicles was estimated and compared to 1990–1999 model years of vehicles. The objective was to determine the effectiveness of the rear seat compared to the front seat for various age groups in newer model year vehicles. The double paired comparison method was used to estimate relative effectiveness. For belted adults of the 25–49 age group, the fatality reduction effectiveness of the rear seat compared to the right front seat was 25 % (CI 11% to 36%), in the 1990–1999 model year vehicles. The relative effectiveness was −31% (CI −63% to −5%) for the same population, in the 2000–2009 model year vehicles. For restrained children 0–8 years old, the relative effectiveness was 55% (CI 48% to 61%) when the vehicles were of the 1990–1999 period. The level of effectiveness for this age group was reduced to 25% (CI −4% to 46%) in the 2000–2009 MYs of vehicles. Results for other age groups of belted occupants have followed a similar trend. All belted adult occupants of 25+ years old were significantly less protected in rear seats as compared to right front seats in the 2000–2009 model years of vehicles. For unbelted occupants however, rear seats were still a safer position than front seats, even in the 2000–2009 model years of vehicles. PMID:21050599

Rural and Urban Differences in Passenger-Vehicle-Occupant Deaths and Seat Belt Use Among Adults - United States, 2014.

PubMed

Beck, Laurie F; Downs, Jonathan; Stevens, Mark R; Sauber-Schatz, Erin K

2017-09-22

Motor-vehicle crashes are a leading cause of death in the United States. Compared with urban residents, rural residents are at an increased risk for death from crashes and are less likely to wear seat belts. These differences have not been well described by levels of rurality. 2014. Data from the Fatality Analysis Reporting System (FARS) and the Behavioral Risk Factor Surveillance System (BRFSS) were used to identify passenger-vehicle-occupant deaths from motor-vehicle crashes and estimate the prevalence of seat belt use. FARS, a census of U.S. motor-vehicle crashes involving one or more deaths, was used to identify passenger-vehicle-occupant deaths among adults aged ≥18 years. Passenger-vehicle occupants were defined as persons driving or riding in passenger cars, light trucks, vans, or sport utility vehicles. Death rates per 100,000 population, age-adjusted to the 2000 U.S. standard population and the proportion of occupants who were unrestrained at the time of the fatal crash, were calculated. BRFSS, an annual, state-based, random-digit-dialed telephone survey of the noninstitutionalized U.S. civilian population aged ≥18 years, was used to estimate prevalence of seat belt use. FARS and BRFSS data were analyzed by a six-level rural-urban designation, based on the U.S. Department of Agriculture 2013 rural-urban continuum codes, and stratified by census region and type of state seat belt enforcement law (primary or secondary). Within each census region, age-adjusted passenger-vehicle-occupant death rates per 100,000 population increased with increasing rurality, from the most urban to the most rural counties: South, 6.8 to 29.2; Midwest, 5.3 to 25.8; West, 3.9 to 40.0; and Northeast, 3.5 to 10.8. (For the Northeast, data for the most rural counties were not reported because of suppression criteria; comparison is for the most urban to the second-most rural counties.) Similarly, the proportion of occupants who were unrestrained at the time of the fatal crash

10th international conference on high-occupancy vehicle systems : conference proceedings

DOT National Transportation Integrated Search

2001-08-01

This report documents the proceedings from the 10th International High-Occupancy Vehicle (HOV) Systems Conference held in Dallas, Texas on August 27-30, 2000. The Conference was sponsored by the Transportation Research Board (TRB), in cooperation wit...

Priority Techniques for High Occupancy Vehicles : State-of-the-Art Overview

DOT National Transportation Integrated Search

1975-11-01

The report, part of a series of publications based on research and development efforts is a concise state-of-the-art overview of priority techniques for high occupancy vehicles (buses, carpools, and vanpools). The report identifies and summarizes sel...

2007 motor vehicle occupant safety survey. Volume 4, Crash injury and emergency medical services report

DOT National Transportation Integrated Search

2008-12-01

The 2007 Motor Vehicle Occupant Safety Survey was the sixth in a series of periodic national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by Sc...

2000 motor vehicle occupant safety survey. Volume 4, Crash injury and emergency medical services report

DOT National Transportation Integrated Search

2001-11-01

The 2000 Motor Vehicle Occupant Safety Survey was the fourth in a series of biennial national telephone surveys on occupant protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted by S...

2007 motor vehicle occupant safety survey : use of and support for emergency medical services systems.

DOT National Transportation Integrated Search

2009-09-01

The Motor Vehicle Occupant Safety Survey (MVOSS) is a national telephone survey administered by NHTSA on a periodic basis to obtain data on attitudes, knowledge, and self-reported behavior primarily in areas of occupant protection. The sample is comp...

Interfacing and Verifying ALHAT Safe Precision Landing Systems with the Morpheus Vehicle

NASA Technical Reports Server (NTRS)

Carson, John M., III; Hirsh, Robert L.; Roback, Vincent E.; Villalpando, Carlos; Busa, Joseph L.; Pierrottet, Diego F.; Trawny, Nikolas; Martin, Keith E.; Hines, Glenn D.

2015-01-01

The NASA Autonomous precision Landing and Hazard Avoidance Technology (ALHAT) project developed a suite of prototype sensors to enable autonomous and safe precision landing of robotic or crewed vehicles under any terrain lighting conditions. Development of the ALHAT sensor suite was a cross-NASA effort, culminating in integration and testing on-board a variety of terrestrial vehicles toward infusion into future spaceflight applications. Terrestrial tests were conducted on specialized test gantries, moving trucks, helicopter flights, and a flight test onboard the NASA Morpheus free-flying, rocket-propulsive flight-test vehicle. To accomplish these tests, a tedious integration process was developed and followed, which included both command and telemetry interfacing, as well as sensor alignment and calibration verification to ensure valid test data to analyze ALHAT and Guidance, Navigation and Control (GNC) performance. This was especially true for the flight test campaign of ALHAT onboard Morpheus. For interfacing of ALHAT sensors to the Morpheus flight system, an adaptable command and telemetry architecture was developed to allow for the evolution of per-sensor Interface Control Design/Documents (ICDs). Additionally, individual-sensor and on-vehicle verification testing was developed to ensure functional operation of the ALHAT sensors onboard the vehicle, as well as precision-measurement validity for each ALHAT sensor when integrated within the Morpheus GNC system. This paper provides some insight into the interface development and the integrated-systems verification that were a part of the build-up toward success of the ALHAT and Morpheus flight test campaigns in 2014. These campaigns provided valuable performance data that is refining the path toward spaceflight infusion of the ALHAT sensor suite.

Crash protectiveness to occupant injury and vehicle damage: An investigation on major car brands.

PubMed

Huang, Helai; Li, Chunyang; Zeng, Qiang

2016-01-01

This study sets out to investigate vehicles' crash protectiveness on occupant injury and vehicle damage, which can be deemed as an extension of the traditional crash worthiness. A Bayesian bivariate hierarchical ordered logistic (BVHOL) model is developed to estimate the occupant protectiveness (OP) and vehicle protectiveness (VP) of 23 major car brands in Florida, with considering vehicles' crash aggressivity and controlling external factors. The proposed model not only takes over the strength of the existing hierarchical ordered logistic (HOL) model, i.e. specifying the order characteristics of crash outcomes and cross-crash heterogeneities, but also accounts for the correlation between the two crash responses, driver injury and vehicle damage. A total of 7335 two-vehicle-crash records with 14,670 cars involved in Florida are used for the investigation. From the estimation results, it's found that most of the luxury cars such as Cadillac, Volvo and Lexus possess excellent OP and VP while some brands such as KIA and Saturn perform very badly in both aspects. The ranks of the estimated safety performance indices are even compared to the counterparts in Huang et al. study [Huang, H., Hu, S., Abdel-Aty, M., 2014. Indexing crash worthiness and crash aggressivity by major car brands. Safety Science 62, 339-347]. The results show that the rank of occupant protectiveness index (OPI) is relatively coherent with that of crash worthiness index, but the ranks of crash aggressivity index in both studies is more different from each other. Meanwhile, a great discrepancy between the OPI rank and that of vehicle protectiveness index is found. What's more, the results of control variables and hyper-parameters estimation as well as comparison to HOL models with separate or identical threshold errors, demonstrate the validity and advancement of the proposed model and the robustness of the estimated OP and VP. Copyright © 2015 Elsevier Ltd. All rights reserved.

Battery electric vehicles - implications for the driver interface.

PubMed

Neumann, Isabel; Krems, Josef F

2016-03-01

The current study examines the human-machine interface of a battery electric vehicle (BEV) from a user-perspective, focussing on the evaluation of BEV-specific displays, the relevance of provided information and challenges for drivers due to the concept of electricity in a road vehicle. A sample of 40 users drove a BEV for 6 months. Data were gathered at three points of data collection. Participants perceived the BEV-specific displays as only moderately reliable and helpful for estimating the displayed parameters. This was even less the case after driving the BEV for 3 months. A taxonomy of user requirements was compiled revealing the need for improved and additional information, especially regarding energy consumption and efficiency. Drivers had difficulty understanding electrical units and the energy consumption of the BEV. On the background of general principles for display design, results provide implications how to display relevant information and how to facilitate drivers' understanding of energy consumption in BEVs. Practitioner Summary: Battery electric vehicle (BEV) displays need to incorporate new information. A taxonomy of user requirements was compiled revealing the need for improved and additional information in the BEV interface. Furthermore, drivers had trouble understanding electrical units and energy consumption; therefore, appropriate assistance is required. Design principles which are specifically important in the BEV context are discussed.

Estimating fatality rates in occupational light vehicle users using vehicle registration and crash data.

PubMed

Stuckey, Rwth; LaMontagne, Anthony D; Glass, Deborah C; Sim, Malcolm R

2010-04-01

To estimate occupational light vehicle (OLV) fatality numbers using vehicle registration and crash data and compare these with previous estimates based on workers' compensation data. New South Wales (NSW) Roads and Traffic Authority (RTA) vehicle registration and crash data were obtained for 2004. NSW is the only Australian jurisdiction with mandatory work-use registration, which was used as a proxy for work-relatedness. OLV fatality rates based on registration data as the denominator were calculated and comparisons made with published 2003/04 fatalities based on workers' compensation data. Thirty-four NSW RTA OLV-user fatalities were identified, a rate of 4.5 deaths per 100,000 organisationally registered OLV, whereas the Australian Safety and Compensation Council (ASCC), reported 28 OLV deaths Australia-wide. More OLV user fatalities were identified from vehicle registration-based data than those based on workers' compensation estimates and the data are likely to provide an improved estimate of fatalities specific to OLV use. OLV-use is an important cause of traumatic fatalities that would be better identified through the use of vehicle-registration data, which provides a stronger evidence base from which to develop policy responses. © 2010 The Authors. Journal Compilation © 2010 Public Health Association of Australia.

Potential occupant injury reduction in the U.S. vehicle fleet for lane departure warning-equipped vehicles in single-vehicle crashes.

PubMed

Kusano, Kristofer; Gorman, Thomas I; Sherony, Rini; Gabler, Hampton C

2014-01-01

Single-vehicle collisions involve only 10 percent of all occupants in crashes in the United States, yet these same crashes account for 31 percent of all fatalities. Along with other vehicle safety advancements, lane departure warning (LDW) systems are being introduced to mitigate the harmful effects of single-vehicle collisions. The objective of this study is to quantify the number of crashes and seriously injured drivers that could have been prevented in the United States in 2012 had all vehicles been equipped with LDW. In order to estimate the potential injury reduction benefits of LDW in the vehicle fleet, a comprehensive crash and injury simulation model was developed. The model's basis was 481 single-vehicle collisions extracted from the NASS-CDS for year 2012. Each crash was simulated in 2 conditions: (1) as it occurred and (2) as if the driver had an LDW system. By comparing the simulated vehicle's off-road trajectory before and after LDW, the reduction in the probability of a crash was determined. The probability of a seriously injured occupant (Maximum Abbreviated Injury Score [MAIS] 3+) given a crash was computed using injury risk curves with departure velocity and seat belt use as predictors. Each crash was simulated between 18 and 216 times to account for variable driver reaction, road, and vehicle conditions. Finally, the probability of a crash and seriously injured driver was summed over all simulations to determine the benefit of LDW. A majority of roads where departure crashes occurred had 2 lanes and were undivided. As a result, 58 percent of crashes had no shoulder. LDW will not be as effective on roads with no shoulder as on roads with large shoulders. LDW could potentially prevent 28.9 percent of all road departure crashes caused by the driver drifting out of his or her lane, resulting in a 24.3 percent reduction in the number of seriously injured drivers. The results of this study show that LDW, if widely adopted, could significantly mitigate

Multilevel Vehicle Design: Fuel Economy, Mobility and Safety Considerations, Part B. Ground Vehicle Weight and Occupant Safety Under Blast Loading

DTIC Science & Technology

2010-05-11

UNCLASSIFIED 11 Occupant Model Inputs: Blast Pulse (apeak) Seat Cushion Foam Stiffness (sc) Seat EA System Stiffness (sEA) Outputs: Upper Neck Axial Force...Floor Pad Surrogate model from linear regression on 300 data points: Inputs: Blast Pulse (apeak) Seat Cushion Foam Stiffness (sc) Seat EA System...B Ground Vehicle Weight and Occupant Safety Under Blast Loading Steven Hoffenson, presenter (U of M) Panos Papalambros, PI (U of M) Michael

Occupant injury in rollover crashes - Contribution of planar impacts with objects and other vehicles.

PubMed

Ivarsson, Johan; Poplin, Gerald; McMurry, Tim; Crandall, Jeff; Kerrigan, Jason

2015-12-01

Planar impacts with objects and other vehicles may increase the risk and severity of injury in rollover crashes. The current study compares the frequency of injury measures (MAIS 2+, 3+, and 4+; fatal; AIS 2+ head and cervical spine; and AIS 3+ head and thorax) as well as vehicle type distribution (passenger car, SUV, van, and light truck), crash kinematics, and occupant demographics between single vehicle single event rollovers (SV Pure) and multiple event rollovers to determine which types of multiple event rollovers can be pooled with SV Pure to study rollover induced occupant injury. Four different types of multiple event rollovers were defined: single and multi-vehicle crashes for which the rollover is the most severe event (SV Prim and MV Prim) and single and multi-vehicle crashes for which the rollover is not the most severe event (SV Non-Prim and MV Non-Prim). Information from real world crashes was obtained from the National Automotive Sampling System - Crashworthiness Data System (NASS-CDS) for the period from 1995 through 2011. Belted, contained or partially ejected, adult occupants in vehicles that completed 1-16 lateral quarter turns were assigned to one of the five rollover categories. The results showed that the frequency of injury in non-primary rollovers (SV Non-Prim and MV Non-Prim) involving no more than one roof inversion is substantially greater than in SV Pure, but that this disparity diminishes for crashes involving multiple inversions. It can further be concluded that for a given number of roof inversions, the distribution of injuries and crash characteristics in SV Pure and SV Prim crashes are sufficiently similar for these categories to be considered collectively for purposes of understanding etiologies and developing strategies for prevention. Copyright © 2015 Elsevier Ltd. All rights reserved.

Digital Systems Validation Handbook. Volume 2. Chapter 19. Pilot - Vehicle Interface

DTIC Science & Technology

1993-11-01

checklists, and other status messages. Voice interactive systems are defi-ed as "the interface between a cooperative human and a machine, which involv -he...Pilot-Vehicle Interface 19-85 5.6.1 Crew Interaction and the Cockpit 19-85 5.6.2 Crew Resource Management and Safety 19-87 5.6.3 Pilot and Crew Training...systems was a "stand-alone" component performing its intended function. Systems and their cockpit interfaces were added as technological advances were

High-Mobility Multipurpose Wheeled Vehicle Rollover Accidents and Injuries to U.S. Army Soldiers by Reported Occupant Restraint Use, 1992-2013.

PubMed

Lo, Michael C; Giffin, Robert P; Pakulski, Kraig A; Davis, W Sumner; Bernstein, Stephen A; Wise, Daniel V

2017-05-01

The high-mobility multipurpose wheeled vehicle (HMMWV) is a light military tactical vehicle. During Operation Iraqi Freedom and Operation Enduring Freedom, the U.S. Army modified the HMMWV into a combat vehicle by adding vehicle armor, which made the vehicle more difficult to control and more likely to roll over. Consequently, reports of fatal rollover accidents involving up-armored HMMWVs began to accumulate during the up-armoring period (August 2003 to April 2005). Furthermore, the lack of occupant restraint use prevalent in a predominantly young, male, and enlisted military population compounded the injuries resulting from these accidents. In this retrospective case series analysis, we describe the characteristics of U.S. Army HMMWV rollover accidents, occupants, and injuries reported worldwide from fiscal year 1992 to 2013 based on reported occupant restraint use. We conducted all analyses using Microsoft Excel 2010 and SAS version 9.1. Because this analysis does not constitute human subjects research, no institutional review board review was required. First, we obtained U.S. Army HMMWV accident records from the U.S. Army Combat Readiness Center, and selected those records indicating a HMMWV rollover had occurred. Next, we successively deduplicated the records at the accident, vehicle, occupant, and injury levels for descriptive analysis of characteristics at each level. For each occupant position, we calculated relative, attributable, and population attributable risks of nonfatal and fatal injury based on reported occupant restraint use. Finally, we analyzed body part injured and nature of injury to characterize the injury patterns that HMMWV occupants in each position sustained based on restraint use. We performed a χ 2 test of homogeneity to assess differences in injury patterns between restrained and unrestrained occupants. A total of 819 U.S. Army HMMWV rollover accidents worldwide were reported from October 1991 through May 2013 involving 821 HMMWVs and

Patterns of correlation between vehicle occupant seat pressure and anthropometry.

PubMed

Paul, Gunther; Daniell, Nathan; Fraysse, François

2012-01-01

Seat pressure is known as a major factor of seat comfort in vehicles. In passenger vehicles, there is lacking research into the seat comfort of rear seat occupants. As accurate seat pressure measurement requires significant effort, simulation of seat pressure is evolving as a preferred method. However, analytic methods are based on complex finite element modeling and therefore are time consuming and involve high investment. Based on accurate anthropometric measurements of 64 male subjects and outboard rear seat pressure measurements in three different passenger vehicles, this study investigates if a set of parameters derived from seat pressure mapping are sensitive enough to differentiate between different seats and whether they correlate with anthropometry in linear models. In addition to the pressure map analysis, H-Points were measured with a coordinate measurement system based on palpated body landmarks and the range of H-Point locations in the three seats is provided. It was found that for the cushion, cushion contact area and cushion front area/force could be modeled by subject anthropometry, while only seatback contact area could be modeled based on anthropometry for all three vehicles. Major differences were found between the vehicles for other parameters.

Interstate 80 high-occupancy vehicle lane project : initial study, proposed mitigated negative declaration.

DOT National Transportation Integrated Search

2006-12-01

The Solano Transportation Authority (STA) in cooperation with the California Department of : Transportation (Caltrans) proposes to construct high-occupancy vehicle (HOV) lanes within the : median of Interstate 80 (I-80) between Red Top Road and Air B...

10th international conference on high-occupancy vehicle systems : compendium of technical papers

DOT National Transportation Integrated Search

2001-08-01

This report provides the technical papers submitted as part of the 10th International High-Occupancy Vehicle (HOV) Systems Conference held in Dallas, Texas on August 27-30, 2000. The Conference was sponsored by the Transportation Research Board (TRB)...

The feasibility test of state-of-the-art face detection algorithms for vehicle occupant detection

NASA Astrophysics Data System (ADS)

Makrushin, Andrey; Dittmann, Jana; Vielhauer, Claus; Langnickel, Mirko; Kraetzer, Christian

2010-01-01

Vehicle seat occupancy detection systems are designed to prevent the deployment of airbags at unoccupied seats, thus avoiding the considerable cost imposed by the replacement of airbags. Occupancy detection can also improve passenger comfort, e.g. by activating air-conditioning systems. The most promising development perspectives are seen in optical sensing systems which have become cheaper and smaller in recent years. The most plausible way to check the seat occupancy by occupants is the detection of presence and location of heads, or more precisely, faces. This paper compares the detection performances of the three most commonly used and widely available face detection algorithms: Viola- Jones, Kienzle et al. and Nilsson et al. The main objective of this work is to identify whether one of these systems is suitable for use in a vehicle environment with variable and mostly non-uniform illumination conditions, and whether any one face detection system can be sufficient for seat occupancy detection. The evaluation of detection performance is based on a large database comprising 53,928 video frames containing proprietary data collected from 39 persons of both sexes and different ages and body height as well as different objects such as bags and rearward/forward facing child restraint systems.

An assessment of high-occupancy vehicle facilities (HOV) in North America : executive report

DOT National Transportation Integrated Search

This executive report provides an overall summary of the major elements of the assessment of high-occupancy vehicle (HOV) lane projects located either on freeways or in separate rights-of-way in North America. The report includes a discussion of the ...

Factors associated with higher levels of injury severity in occupants of motor vehicles that were severely damaged in traffic crashes in Kentucky, 2000-2001.

PubMed

Singleton, Michael; Qin, Huifang; Luan, Jingyu

2004-06-01

The majority of motor vehicle occupants who were killed or hospitalized in crashes in Kentucky in 2000-2001 occupied vehicles that were severely damaged in the crash. Even so, overall only a small percentage of all severely damaged vehicle occupants were killed or hospitalized. The purpose was to identify occupant, vehicle, crash, and roadway/environmental factors that were associated with increased risk of severe injury in crashes where the occupant's vehicle was severely damaged. This study probabilistically linked Kentucky's statewide motor vehicle crash and inpatient hospital discharge data files for 2000 and 2001, and selected cases representing occupants of vehicles that were reported by police as having either "severe" or "very severe" damage. For occupants who were identified through data linkage as having been hospitalized, the Injury Severity Score (ISS) was calculated using ICDMAP-90 software, and the scores were stratified into the following categories: critical (>24), severe (15-24), moderate (9-14), and mild (<9). We then created an outcome variable, injury severity level, with five levels: killed; hospitalized with at least moderate injuries (ISS = critical, severe, or moderate); hospitalized with mild injuries (ISS = mild); injured according to the police report but not hospitalized; and no apparent injury according to the police report. We performed a stepwise, ordinal logistic regression of injury severity, using independent variables identified from the existing crash literature. Occupant risk factors for higher levels of injury severity selected by the regression were age (risk increased with age, other factors being equal), female gender, restraint non-use, ejection from the vehicle, and driver impairment (by alcohol and/or drugs). Crash risk factors included head-on collision, collision with a fixed object, vehicle rollover, and vehicle fire. Roadway/environmental factors were federal- or state-maintained roadway and posted speed limit 89 kph

Traveling by Bus Instead of Car on Urban Major Roads: Safety Benefits for Vehicle Occupants, Pedestrians, and Cyclists.

PubMed

Morency, Patrick; Strauss, Jillian; Pépin, Félix; Tessier, François; Grondines, Jocelyn

2018-04-01

Some studies have estimated fatality and injury rates for bus occupants, but data was aggregated at the country level and made no distinction between bus types. Also, injured pedestrians and cyclists, as a result of bus travel, were overlooked. We compared injury rates for car and city bus occupants on specific urban major roads, as well as the cyclist and pedestrian injuries associated with car and bus travel. We selected ten bus routes along major urban arterials (in Montreal, Canada). Passenger-kilometers traveled were estimated from vehicle counts at intersections (2002-2010) and from bus passenger counts (2008). Police accident reports (2001-2010) provided injury data for all modes. Injury rates associated with car and bus travel were calculated for vehicle occupants, pedestrians, and cyclists. Injury rate ratios were also computed. The safety benefits of bus travel, defined as the number of vehicle occupant, cyclist, and pedestrian injuries saved, were estimated for each route. Overall, for all ten routes, the ratio between car and bus occupant injury rates is 3.7 (95% CI [3.4, 4.0]). The rates of pedestrian and cyclist injuries per hundred million passenger-kilometers are also significantly greater for car travel than that for bus travel: 4.1 (95% CI [3.5, 4.9]) times greater for pedestrian injuries; 5.3 (95% CI [3.8, 7.6]) times greater for cyclist injuries. Similar results were observed for fatally and severely injured vehicle occupants, cyclists, and pedestrians. At the route level, the safety benefits of bus travel increase with the difference in injury rate associated with car and bus travel but also with the amount of passenger-kilometers by bus. Results show that city bus is a safer mode than car, for vehicle occupants but also for cyclists and pedestrians traveling along these bus routes. The safety benefits of bus travel greatly vary across urban routes; this spatial variation is most likely linked to environmental factors. Understanding the

Restraint of children with additional needs in motor vehicles: knowledge and challenges of paediatric occupational therapists in Victoria, Australia.

PubMed

Baker, Anne; Galvin, Jane; Vale, Lisa; Lindner, Helen

2012-02-01

This research project aimed to understand the challenges faced by occupational therapists when making recommendations regarding the restraint of children with additional needs in motor vehicles in Victoria, Australia. A cross-sectional survey design was used to explore current practice in relation to the prescription of motor vehicle restraints in Victoria, Australia. An electronic survey was sent to occupational therapists working with children aged from birth to 18 years in early intervention services, hospitals, schools, community services or private practice.   Challenges faced by occupational therapists related to a lack of knowledge of relevant standards and legal requirements, issues seating children with behavioural difficulties, families' inability to purchase recommended equipment and constraints as a result of funding issues. Further work is required to develop appropriate resources which support occupational therapists to make car seating recommendations for children with additional needs which comply with Australian legal requirements and standards. © 2011 The Authors. Australian Occupational Therapy Journal © 2011 Occupational Therapy Australia.

An Injury Severity-, Time Sensitivity-, and Predictability-Based Advanced Automatic Crash Notification Algorithm Improves Motor Vehicle Crash Occupant Triage.

PubMed

Stitzel, Joel D; Weaver, Ashley A; Talton, Jennifer W; Barnard, Ryan T; Schoell, Samantha L; Doud, Andrea N; Martin, R Shayn; Meredith, J Wayne

2016-06-01

Advanced Automatic Crash Notification algorithms use vehicle telemetry measurements to predict risk of serious motor vehicle crash injury. The objective of the study was to develop an Advanced Automatic Crash Notification algorithm to reduce response time, increase triage efficiency, and improve patient outcomes by minimizing undertriage (<5%) and overtriage (<50%), as recommended by the American College of Surgeons. A list of injuries associated with a patient's need for Level I/II trauma center treatment known as the Target Injury List was determined using an approach based on 3 facets of injury: severity, time sensitivity, and predictability. Multivariable logistic regression was used to predict an occupant's risk of sustaining an injury on the Target Injury List based on crash severity and restraint factors for occupants in the National Automotive Sampling System - Crashworthiness Data System 2000-2011. The Advanced Automatic Crash Notification algorithm was optimized and evaluated to minimize triage rates, per American College of Surgeons recommendations. The following rates were achieved: <50% overtriage and <5% undertriage in side impacts and 6% to 16% undertriage in other crash modes. Nationwide implementation of our algorithm is estimated to improve triage decisions for 44% of undertriaged and 38% of overtriaged occupants. Annually, this translates to more appropriate care for >2,700 seriously injured occupants and reduces unnecessary use of trauma center resources for >162,000 minimally injured occupants. The algorithm could be incorporated into vehicles to inform emergency personnel of recommended motor vehicle crash triage decisions. Lower under- and overtriage was achieved, and nationwide implementation of the algorithm would yield improved triage decision making for an estimated 165,000 occupants annually. Copyright © 2016. Published by Elsevier Inc.

Implementation elements for conversion of general-purpose freeway lane into high-occupancy-vehicle lane

DOT National Transportation Integrated Search

1997-01-01

Conversion of a general-purpose freeway into a high-occupancy-vehicle (HOV) lane is an alternative to infrastructure addition for HOV system implementation. Research indicates that lane conversion is feasible technically if sufficient HOV usage and m...

The influence of damage distribution on serious brain injury in occupants in frontal motor vehicle crashes.

PubMed

Coimbra, Raul; Conroy, Carol; Hoyt, David B; Pacyna, Sharon; May, MarSue; Erwin, Steve; Tominaga, Gail; Kennedy, Frank; Sise, Michael; Velky, Tom

2008-07-01

In spite of improvements in motor vehicle safety systems and crashworthiness, motor vehicle crashes remain one of the leading causes of brain injury. The purpose of this study was to determine if the damage distribution across the frontal plane affected brain injury severity of occupants in frontal impacts. Occupants in "head on" frontal impacts with a Principal Direction of Force (PDOF) equal to 11, 12, or 1o'clock who sustained serious brain injury were identified using the Crash Injury Research Engineering Network (CIREN) database. Impacts were further classified based on the damage distribution across the frontal plane as distributed, offset, and extreme offset (corner). Overall, there was no significant difference for brain injury severity (based on Glasgow Coma Scale<9, or brain injury AIS>2) comparing occupants in the different impact categories. For occupants in distributed frontal impacts, safety belt use was protective (odds ratio (OR)=0.61) and intrusion at the occupant's seat position was four times more likely to result in severe (Glasgow Coma Scale (GCS)<9) brain injury (OR=4.35). For occupants in offset frontal impacts, again safety belt use was protective against severe brain injury (OR=0.25). Possibly due to the small number of brain-injured occupants in corner impacts, safety belts did not significantly protect against increased brain injury severity during corner impacts. This study supports the importance of safety belt use to decrease brain injury severity for occupants in distributed and offset frontal crashes. It also illustrates how studying "real world" crashes may provide useful information on occupant injuries under impact circumstances not currently covered by crash testing.

Flight Force Measurements on a Spacecraft to Launch Vehicle Interface

NASA Astrophysics Data System (ADS)

Kaufman, Daniel S.; Gordon, Scott A.

2012-07-01

For several years we had wanted to measure interface forces between a launch vehicle and the Payload. Finally in July 2006 a proposal was made and funded to evaluate the use of flight force measurements (FFM) to improve the loads process of a Spacecraft in its design and test cycle. A NASA/Industry team was formed, the core Team consisted of 20 people. The proposal identified two questions that this assessment would attempt to address by obtaining the flight forces. These questions were: 1) Is flight correlation and reconstruction with acceleration methods sufficient? 2) How much can the loads and therefore the design and qualification be reduced by having force measurements? The objective was to predict the six interface driving forces between the Spacecraft and the Launch Vehicle throughout the boost phase. Then these forces would be compared with reconstructed loads analyses for evaluation in an attempt to answer them. The paper will present the development of a strain based force measurement system and also an acceleration method, actual flight results, post flight evaluations and lessons learned.

An Efficient Optimal Design Methodology for Nonlinear Multibody Dynamics Systems with Application to Vehicle Occupant Restraint Systems

DTIC Science & Technology

2011-04-01

Lai, W., Carhart, M., Richards, D., Brown, J. and Raasch, C., (2006), Modeling the Effects of Seat Belt Pretensioners on Occupant Kinematics During...from being ejected from the vehicle but also be able to assist rapid entry into the vehicle during a rollover or other accidents to avoid injury or...vehicles, such as gunner restraint systems, blast-protective seating systems and other restraint systems, and commercial applications, such as

Electric vehicle equipment for grid-integrated vehicles

DOEpatents

Kempton, Willett

2013-08-13

Methods, systems, and apparatus for interfacing an electric vehicle with an electric power grid are disclosed. An exemplary apparatus may include a station communication port for interfacing with electric vehicle station equipment (EVSE), a vehicle communication port for interfacing with a vehicle management system (VMS), and a processor coupled to the station communication port and the vehicle communication port to establish communication with the EVSE via the station communication port, receive EVSE attributes from the EVSE, and issue commands to the VMS to manage power flow between the electric vehicle and the EVSE based on the EVSE attributes. An electric vehicle may interface with the grid by establishing communication with the EVSE, receiving the EVSE attributes, and managing power flow between the EVE and the grid based on the EVSE attributes.

Forecasting impact injuries of unrestrained occupants in railway vehicle passenger compartments.

PubMed

Xie, Suchao; Zhou, Hui

2014-01-01

In order to predict the injury parameters of the occupants corresponding to different experimental parameters and to determine impact injury indices conveniently and efficiently, a model forecasting occupant impact injury was established in this work. The work was based on finite experimental observation values obtained by numerical simulation. First, the various factors influencing the impact injuries caused by the interaction between unrestrained occupants and the compartment's internal structures were collated and the most vulnerable regions of the occupant's body were analyzed. Then, the forecast model was set up based on a genetic algorithm-back propagation (GA-BP) hybrid algorithm, which unified the individual characteristics of the back propagation-artificial neural network (BP-ANN) model and the genetic algorithm (GA). The model was well suited to studies of occupant impact injuries and allowed multiple-parameter forecasts of the occupant impact injuries to be realized assuming values for various influencing factors. Finally, the forecast results for three types of secondary collision were analyzed using forecasting accuracy evaluation methods. All of the results showed the ideal accuracy of the forecast model. When an occupant faced a table, the relative errors between the predicted and experimental values of the respective injury parameters were kept within ± 6.0 percent and the average relative error (ARE) values did not exceed 3.0 percent. When an occupant faced a seat, the relative errors between the predicted and experimental values of the respective injury parameters were kept within ± 5.2 percent and the ARE values did not exceed 3.1 percent. When the occupant faced another occupant, the relative errors between the predicted and experimental values of the respective injury parameters were kept within ± 6.3 percent and the ARE values did not exceed 3.8 percent. The injury forecast model established in this article reduced repeat experiment times

1996 motor vehicle occupant safety survey. Volume 4, Crash injury and emergency medical services report

DOT National Transportation Integrated Search

1997-11-01

Author's abstract: The National Highway Traffic Safety Administration (NHTSA) commissioned the research firm of Schulman, Ronca & Bucuvalas, Inc. (SRBI) to conduct the 1996 Motor Vehicle Occupant Safety Survey. Between November 4, 1996 and January 5,...

Sitting in the Pilot's Seat; Optimizing Human-Systems Interfaces for Unmanned Aerial Vehicles

NASA Technical Reports Server (NTRS)

Queen, Steven M.; Sanner, Kurt Gregory

2011-01-01

One of the pilot-machine interfaces (the forward viewing camera display) for an Unmanned Aerial Vehicle called the DROID (Dryden Remotely Operated Integrated Drone) will be analyzed for optimization. The goal is to create a visual display for the pilot that as closely resembles an out-the-window view as possible. There are currently no standard guidelines for designing pilot-machine interfaces for UAVs. Typically, UAV camera views have a narrow field, which limits the situational awareness (SA) of the pilot. Also, at this time, pilot-UAV interfaces often use displays that have a diagonal length of around 20". Using a small display may result in a distorted and disproportional view for UAV pilots. Making use of a larger display and a camera lens with a wider field of view may minimize the occurrences of pilot error associated with the inability to see "out the window" as in a manned airplane. It is predicted that the pilot will have a less distorted view of the DROID s surroundings, quicker response times and more stable vehicle control. If the experimental results validate this concept, other UAV pilot-machine interfaces will be improved with this design methodology.

Experimental study on occupant's thermal responses under the non-uniform conditions in vehicle cabin during the heating period

NASA Astrophysics Data System (ADS)

Zhang, Wencan; Chen, Jiqing; Lan, Fengchong

2014-03-01

The existing investigations on thermal comfort mostly focus on the thermal environment conditions, especially of the air-flow field and the temperature distributions in vehicle cabin. Less attention appears to direct to the thermal comfort or thermal sensation of occupants, even to the relationship between thermal conditions and thermal sensation. In this paper, a series of experiments were designed and conducted for understanding the non-uniform conditions and the occupant's thermal responses in vehicle cabin during the heating period. To accurately assess the transient temperature distribution in cabin in common daily condition, the air temperature at a number of positions is measured in a full size vehicle cabin under natural winter environment in South China by using a discrete thermocouples network. The occupant body is divided into nine segments, the skin temperature at each segment and the occupant's local thermal sensation at the head, body, upper limb and lower limb are monitored continuously. The skin temperature is observed by using a discrete thermocouples network, and the local thermal sensation is evaluated by using a seven-point thermal comfort survey questionnaire proposed by American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc(ASHRAE) Standard. The relationship between the skin temperature and the thermal sensation is discussed and regressed by statistics method. The results show that the interior air temperature is highly non-uniform over the vehicle cabin. The locations where the occupants sit have a significant effect on the occupant's thermal responses, including the skin temperature and the thermal sensation. The skin temperature and thermal sensation are quite different between body segments due to the effect of non-uniform conditions, clothing resistance, and the human thermal regulating system. A quantitative relationship between the thermal sensation and the skin temperature at each body segment of occupant in

Vital signs: restraint use and motor vehicle occupant death rates among children aged 0-12 years - United States, 2002-2011.

PubMed

Sauber-Schatz, Erin K; West, Bethany A; Bergen, Gwen

2014-02-07

Motor vehicle crashes are a leading cause of death among children in the United States. Age- and size-appropriate child restraint use is the most effective method for reducing these deaths. CDC analyzed 2002–2011 data from the Fatality Analysis Reporting System to determine the number and rate of motor-vehicle occupant deaths, and the proportion of unrestrained child deaths among children aged <1 year, 1–3 years , 4–7 years, 8–12 years, and for all children aged 0–12 years. Age group–specific death rates and proportions of unrestrained child motor vehicle deaths for 2009–2010 were further stratified by race/ethnicity. Motor vehicle occupant death rates for children declined significantly from 2002 to 2011. However, one third (33%) of children who died in 2011 were unrestrained. Compared with white children for 2009–2010, black children had significantly higher death rates, and black and Hispanic children both had significantly higher proportions of unrestrained child deaths. Motor vehicle occupant deaths among children in the United States have declined in the past decade, but more deaths could be prevented if restraints were always used. Effective interventions, including child passenger restraint laws (with child safety seat/ booster seat coverage through at least age 8 years) and child safety seat distribution plus education programs, can increase restraint use and reduce child motor vehicle deaths.

Injuries to Occupants of U.S. Army High Mobility Multipurpose Wheeled Vehicles in Rollover Accidents, 1989-2007

DTIC Science & Technology

2013-04-02

This research conducted on occupant injuries in U.S. Army High Mobility Multipurpose Wheeled Vehicle (HMMWV) rollover accidents was presented at the ...12  1 Introduction The High Mobility Multipurpose Wheeled Vehicle (HMMWV) is...Soldiers may experience the full impact of jarring forces and/or projectile forces of unrestrained equipment. Rollovers are especially hazardous to

Reducing single-occupancy vehicle use in Northern New England; unlimited access, employee incentives and ridesharing.

DOT National Transportation Integrated Search

2014-06-01

This report focuses on the approaches used by organizations promoting sustainable transportation to reduce single-occupancy vehicle use. Transportation contributes about one-third of GHG emissions in the U.S. and personal automobile use is the leadin...

Occupant and Crash Characteristics in Thoracic and Lumbar Spine Injuries Resulting From Motor Vehicle Collisions

PubMed Central

Rao, Raj D.; Berry, Chirag; Yoganandan, Narayan; Agarwal, Arnav

2016-01-01

Background context Motor vehicle collisions (MVC) are a leading cause of thoracic and lumbar (T and L) spine injuries. Mechanisms of injury in vehicular crashes that result in thoracic and lumbar fractures and the spectrum of injury in these occupants have not been extensively studied in the literature. Purpose The objective was to investigate the patterns of T and L spine injury following MVC; correlate these patterns with restraint use, crash characteristics and demographic variables; and study the associations of these injuries with general injury morbidity and fatality. Study design/Setting Retrospective study of a prospectively gathered database. Patient sample Six hundred and thirty-one occupants with T and L (T1-L5) spine injuries from 4572 occupants included in the Crash Injury Research and Engineering Network (CIREN) database between 1996 and 2011. Outcome measures No clinical outcome measures were evaluated in this study. Methods The CIREN database includes moderate to severely injured occupants from MVC involving vehicles manufactured recently. Demographic, injury and crash data from each patient was analyzed for correlations between pattern of T and L spine injury, associated extra-spinal injuries and overall injury severity score (ISS), type and use of seat belts, and other crash characteristics. T and L spine injury pattern was categorized using a modified Denis classification, to include extension injuries as a separate entity. Results T and L spine injuries were identified in 631 of 4572 vehicle occupants, of whom 299 sustained major injuries (including 21 extension injuries) and 332 sustained minor injuries. Flexion-distraction injuries were more prevalent in children and young adults, and extension injuries in older adults (mean age 65.7 years). Occupants with extension injuries had a mean BMI of 36.0 and a fatality rate of 23.8%, much higher than the fatality rate for the entire cohort (10.9%). The most frequent extra-spinal injuries (Abbreviated

The changing epidemiology of open fractures in vehicle occupants, pedestrians, motorcyclists and cyclists.

PubMed

Winkler, Dennis; Goudie, Stuart T; Court-Brown, Charles M

2018-02-01

To investigate the changing epidemiology of open fractures in vehicle occupants, pedestrians, motorcyclists and cyclists. Data on all non-spinal open fractures admitted to the Royal Infirmary of Edinburgh after a road traffic accident between 1988 and 2010 were collected and analysed to provide information about the changing epidemiology in different patient groups. Demographic information was collected on all patients with the severity of injury being analysed with the Injury Severity Score (ISS), Musculoskeletal Index (MSI) and the number of open fractures. The severity of the open fractures was analysed using the Gustilo classification. The 23-year study period was divided into four shorter periods and the results were compared. There were 696 patients treated in 23 years. Analysis showed that the incidence of RTA open fractures initially fell in both males and females and continued to fall in females during the 23 years. In males it levelled off about 2000. The age of the female patients also fell during the study period but it did not change in males. The only patient group to show an increased incidence of open fractures were cyclists. In vehicle occupants the incidence fell throughout the study period but it levelled off in pedestrians and motorcyclists. There was no difference in the severity of injury in any group during the study period. The most severe open fractures were those of the distal femur and femoral diaphysis although open tibial diaphyseal fractures were the most common fracture in all patient groups. Improved car design and road safety legislation has resulted in a reduction in the incidence of open fractures in vehicle occupants, pedestrians and motorcyclists. The most obvious group to have benefitted from this are older female pedestrians. The only group to show an increase in age during the study period were male motorcyclists. Copyright © 2017 Elsevier Ltd. All rights reserved.

Orion Crew Injury Prediction: Landing Conditions and Vehicle Interface Elements

NASA Technical Reports Server (NTRS)

Danelson, Kerry; Gernhardt, Michael

2009-01-01

This presentation reviews the work being done to research the possibility of injuries from landing the Orion Crew Exploration Vehicle in either water or land contingencies This was done using the Total Human Model for Safety (THUMS) finite element model. The purpose of the simulations was to compare variations of a Vehicle Interface Element (VIE) and to evaluate the potential for injury. The presentation is accompanied by several animations from the model runs, showing the projected motion, with and without the various suggested types of VIEs. There are charts showing the injury metrics with the various types of VIEs. The ultimate use of this analysis was to assist in a selection of possible VIE designs

Pilot-Vehicle Interface

DTIC Science & Technology

1993-11-01

way is to develop a crude but working model of an entire system. The other is by developing a realistic model of the user interface , leaving out most...devices or by incorporating software for a more user -friendly interface . Automation introduces the possibility of making data entry errors. Multimode...across various human- computer interfaces . 127 a Memory: Minimize the amount of information that the user must maintain in short-term memory

Signing and pavement marking for concurrent-flow high-occupancy-vehicle lanes : summary of current practice

DOT National Transportation Integrated Search

1997-01-01

Concurrent-flow lanes account for more than half of existing high-occupancy-vehicle (HOV) mileage in the United States. Traffic on this type of HOV lane operates in the same direction as the adjacent traffic, typically in the far-left lane. Limited n...

Traffic safety facts 1996 : occupant protection

DOT National Transportation Integrated Search

1997-01-01

In 1996, 32,317 occupants of passenger vehicles (cars, light trucks, vans, and utility vehicles) were killed in motor vehicle traffic crashes, 77 percent of the 41,907 traffic fatalities reported for the year. Among passenger vehicle occupants over 4...

Traffic safety facts 1994 : occupant protection

DOT National Transportation Integrated Search

1995-01-01

In 1994, 30,780 occupants of passenger vehicles (cars, light trucks, vans, and utility vehicles) were killed in motor vehicle traffic crashes, 76 percent of the 40,676 traffic fatalities reported for the year. Among passenger vehicle occupants over 4...

Traffic safety facts 1995 : occupant protection

DOT National Transportation Integrated Search

1996-01-01

In 1995, 31,897 occupants of passenger vehicles (cars, light trucks, vans, and utility vehicles) were killed in motor vehicle traffic crashes, 76 percent of the 41,798 traffic fatalities reported for the year. Among passenger vehicle occupants over 4...

Understanding the emission impacts of high-occupancy vehicle (HOV) to high-occupancy toll (HOT) lane conversions: Experience from Atlanta, Georgia.

PubMed

Xu, Yanzhi Ann; Liu, Haobing; Rodgers, Michael O; Guin, Angshuman; Hunter, Michael; Sheikh, Adnan; Guensler, Randall

2017-08-01

Converting a congested high-occupancy vehicle (HOV) lane into a high-occupancy toll (HOT) lane is a viable option for improving travel time reliability for carpools and buses that use the managed lane. However, the emission impacts of HOV-to-HOT conversions are not well understood. The lack of emission impact quantification for HOT conversions creates a policy challenge for agencies making transportation funding choices. The goal of this paper is to evaluate the case study of before-and-after changes in vehicle emissions for the Atlanta, Georgia, I-85 HOV/HOT lane conversion project, implemented in October 2011. The analyses employed the Motor Vehicle Emission Simulator (MOVES) for project-level analysis with monitored changes in vehicle activity data collected by Georgia Tech researchers for the Georgia Department of Transportation (GDOT). During the quarterly field data collection from 2010 to 2012, more than 1.5 million license plates were observed and matched to vehicle class and age information using the vehicle registration database. The study also utilized the 20-sec, lane-specific traffic operations data from the Georgia NaviGAtor intelligent transportation system, as well as a direct feed of HOT lane usage data from the State Road and Tollway Authority (SRTA) managed lane system. As such, the analyses in this paper simultaneously assessed the impacts associated with changes in traffic volumes, on-road operating conditions, and fleet composition before and after the conversion. Both greenhouse gases and criteria pollutants were examined. A straight before-after analysis showed about 5% decrease in air pollutants and carbon dioxide (CO 2 ). However, when the before-after calendar year of analysis was held constant (to account for the effect of 1 yr of fleet turnover), mass emissions at the analysis site during peak hours increased by as much as 17%, with little change in CO 2 . Further investigation revealed that a large percentage decrease in criteria

Simulation of adaptive semi-active magnetorheological seat damper for vehicle occupant blast protection

NASA Astrophysics Data System (ADS)

Yoo, Jin-Hyeong; Murugan, Muthuvel; Wereley, Norman M.

2013-04-01

This study investigates a lumped-parameter human body model which includes lower leg in seated posture within a quarter-car model for blast injury assessment simulation. To simulate the shock acceleration of the vehicle, mine blast analysis was conducted on a generic land vehicle crew compartment (sand box) structure. For the purpose of simulating human body dynamics with non-linear parameters, a physical model of a lumped-parameter human body within a quarter car model was implemented using multi-body dynamic simulation software. For implementing the control scheme, a skyhook algorithm was made to work with the multi-body dynamic model by running a co-simulation with the control scheme software plug-in. The injury criteria and tolerance levels for the biomechanical effects are discussed for each of the identified vulnerable body regions, such as the relative head displacement and the neck bending moment. The desired objective of this analytical model development is to study the performance of adaptive semi-active magnetorheological damper that can be used for vehicle-occupant protection technology enhancements to the seat design in a mine-resistant military vehicle.

Network Performance Evaluation Model for assessing the impacts of high-occupancy vehicle facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janson, B.N.; Zozaya-Gorostiza, C.; Southworth, F.

1986-09-01

A model to assess the impacts of major high-occupancy vehicle (HOV) facilities on regional levels of energy consumption and vehicle air pollution emissions in urban aeas is developed and applied. This model can be used to forecast and compare the impacts of alternative HOV facility design and operation plans on traffic patterns, travel costs, model choice, travel demand, energy consumption and vehicle emissions. The model is designed to show differences in the overall impacts of alternative HOV facility types, locations and operation plans rather than to serve as a tool for detailed engineering design and traffic planning studies. The Networkmore » Performance Evaluation Model (NETPEM) combines several urban transportation planning models within a multi-modal network equilibrium framework including modules with which to define the type, location and use policy of the HOV facility to be tested, and to assess the impacts of this facility.« less

Obesity and vehicle type as risk factors for injury caused by motor vehicle collision.

PubMed

Donnelly, John P; Griffin, Russell Lee; Sathiakumar, Nalini; McGwin, Gerald

2014-04-01

This study sought to describe variations in the risk of motor vehicle collision (MVC) injury and death by occupant body mass index (BMI) class and vehicle type. We hypothesized that the relationship between BMI and the risk of MVC injury or mortality would be modified by vehicle type. This is a retrospective cohort study of occupants involved in MVCs using data from the Crash Injury Research and Engineering Network and the National Automotive Sampling System Crashworthiness Data System. Occupants were grouped based on vehicle body style (passenger car, sport utility vehicle, or light truck) and vehicle size (compact or normal, corresponding to below- or above-average curb weight). The relationship between occupant BMI class (underweight, normal weight, overweight, or obese) and risk of injury or mortality was examined for each vehicle type. Odds ratios (ORs) adjusted for various occupant and collision characteristics were estimated. Of an estimated 44 million occupants of MVCs sampled from 2000 to 2009, 37.1% sustained an injury. We limited our analysis to injuries achieving an Abbreviated Injury Scale (AIS) score of 2 or more severe, totaling 17 million injuries. Occupants differed substantially in terms of demographic and collision characteristics. After adjustment for confounding factors, we found that obesity was a risk factor for mortality caused by MVC (OR, 1.6; 95% confidence interval [CI], 1.2-2.0). When stratified by vehicle type, we found that obesity was a risk factor for mortality in larger vehicles, including any-sized light trucks (OR, 2.1; 95% CI, 1.3-3.5), normal-sized passenger cars (OR, 1.6; 95% CI, 1.1-2.3), and normal-sized sports utility vehicles or vans (OR, 2.0; 95% CI, 1.0-3.8). Being overweight was a risk factor in any-sized light trucks (OR, 1.5; 95% CI, 1.1-2.1). We identified a significant interaction between occupant BMI class and vehicle type in terms of MVC-related mortality risk. Both factors should be taken into account when

The development of a complementary expendable launch vehicle interface for an STS deployable payload

NASA Astrophysics Data System (ADS)

Eubanks, Ed; Gibb, John

1990-04-01

The development is described of an interface, the Titan Payload Adapter (TPA), between a Space Transportation System (STS) deployable payload and an expendable launch vehicle (ELV). Separate ascent and separation constraint systems allow a payload with integral trunnions to retain its originally designed, boost-phase load structure, yet also allow the expendable booster vehicle to separate from the payload via retro-rockets. Design requirements as well as development problems and their solutions are discussed.

The development of a complementary expendable launch vehicle interface for an STS deployable payload

NASA Technical Reports Server (NTRS)

Eubanks, ED; Gibb, John

1990-01-01

The development is described of an interface, the Titan Payload Adapter (TPA), between a Space Transportation System (STS) deployable payload and an expendable launch vehicle (ELV). Separate ascent and separation constraint systems allow a payload with integral trunnions to retain its originally designed, boost-phase load structure, yet also allow the expendable booster vehicle to separate from the payload via retro-rockets. Design requirements as well as development problems and their solutions are discussed.

An Empirical Study on Operator Interface Design for Handheld Devices to Control Micro Aerial Vehicles

DTIC Science & Technology

2010-10-01

An Empirical Study on Operator Interface Design for Handheld Devices to Control Micro Aerial Vehicles Ming Hou...Report DRDC Toronto TR 2010-075 October 2010 An Empirical Study on Operator Interface Design for Handheld Devices to...drives the need for a small and light controller which will not hinder a soldier carrying it. This requirement brings an issue of designing an

Occupant Kinematics in Simulated Autonomous Driving Vehicle Collisions: Influence of Seating Position, Direction and Angle.

PubMed

Kitagawa, Yuichi; Hayashi, Shigeki; Yamada, Katsunori; Gotoh, Mitsuaki

2017-11-01

This two-part study analyzed occupant kinematics in simulated collisions of future automated driving vehicles in terms of seating configuration. In part one, a frontal collision was simulated with four occupants with the front seats reversed. The left front seat occupant was unbelted while the others were belted. In part two of the study, occupant restraint was examined in various seating configurations using a single seat model with a three-point seatbelt. The seat direction with respect to impact was considered as forward, rearward, and lateral facing in 45 degree increments. The effect of seat recline was also studied in the forward-facing and rear-facing cases by assuming three positions: driving position, resting position and relaxed position. Occupants were represented by human body finite element models. The results of part one showed that the front seat (rear-facing) occupants were restrained by the seatback, resulting in T1 forward displacement less than 100 mm; the rear seat occupants were restrained by the seatbelt resulting larger T1 forward displacement more than 500 mm. The results of the part two showed the directional dependence of occupant restraint. Greater T1 displacements were observed when the occupant faced lateral or front oblique. However, the seatbelt provided some restraint in all directions considered. The seatback generated contact force to the occupant when it was in the impact direction, including the lateral directions. The relaxed position allowed increased excursion compared to the driving position when the occupant faced rearward, but the magnitude of this increase was lower with lower impact speed.

Electrical properties and subband occupancy at the (La ,Sr ) (Al ,Ta ) O3/SrTi O3 interface

NASA Astrophysics Data System (ADS)

Han, K.; Huang, Z.; Zeng, S. W.; Yang, M.; Li, C. J.; Zhou, W. X.; Wang, X. Renshaw; Venkatesan, T.; Coey, J. M. D.; Goiran, M.; Escoffier, W.; Ariando

2017-06-01

The quasi-two-dimensional electron gas at oxide interfaces provides a platform for investigating quantum phenomena in strongly correlated electronic systems. Here, we study the transport properties at the high-mobility (L a0.3S r0.7 ) (A l0.65T a0.35 ) O3/SrTi O3 interface. Before oxygen annealing, the as-grown interface exhibits a high electron density and electron occupancy of two subbands: higher-mobility electrons (μ1≈104c m2V-1s-1 at 2 K) occupy the lower-energy 3 dxy subband, while lower-mobility electrons (μ1≈103c m2V-1s-1 at 2 K) propagate in the higher-energy 3 dxz /yz -dominated subband. After removing oxygen vacancies by annealing in oxygen, only a single type of 3 dxy electrons remain at the annealed interface, showing tunable Shubnikov-de Haas oscillations below 9 T at 2 K and an effective mass of 0.7 me . By contrast, no oscillation is observed at the as-grown interface even when electron mobility is increased to 50 000 c m2V-1s-1 by gating voltage. Our results reveal the important roles of both carrier mobility and subband occupancy in tuning the quantum transport at oxide interfaces.

Priority Treatment for High Occupancy Vehicles in the United States: A Review of Recent and Forthcoming Projects

DOT National Transportation Integrated Search

1978-08-01

The purposes of the report are to: (1) describe recent High Occupancy Vehicle (HOV) preferential projects in the United States; (2) summarize the results of these projects and draw implications; and (3) outline projects which are to be implemented ov...

Space transfer vehicle concepts and requirements study. Volume 2, book 3: STV system interfaces

NASA Technical Reports Server (NTRS)

Weber, Gary A.

1991-01-01

This report presents the results of systems analyses and conceptual design of space transfer vehicles (STV). The missions examined included piloted and unpiloted lunar outpost support and spacecraft servicing, and unpiloted payload delivery to various earth and solar orbits. The study goal was to examine the mission requirements and provide a decision data base for future programmatic development plans. The final lunar transfer vehicles provided a wide range of capabilities and interface requirements while maintaining a constant payload mission model. Launch vehicle and space station sensitivity was examined, with the final vehicles as point design covering the range of possible options. Development programs were defined and technology readiness levels for different options were determined. Volume 1 presents the executive summary, volume 2 provides the study results, and volume 3 the cost and WBS data.

An arm wearable haptic interface for impact sensing on unmanned aerial vehicles

NASA Astrophysics Data System (ADS)

Choi, Yunshil; Hong, Seung-Chan; Lee, Jung-Ryul

2017-04-01

In this paper, an impact monitoring system using fiber Bragg grating (FBG) sensors and vibro-haptic actuators has been introduced. The system is suggested for structural health monitoring (SHM) for unmanned aerial vehicles (UAVs), by making a decision with human-robot interaction. The system is composed with two major subsystems; an on-board system equipped on UAV and an arm-wearable interface for ground pilot. The on-board system acquires impact-induced wavelength changes and performs localization process, which was developed based on arrival time calculation. The arm-wearable interface helps ground pilots to make decision about impact location themselves by stimulating their tactile-sense with motor vibration.

Design study of RL10 derivatives. Volume 3, part 1: Preliminary interface control document. [development of baseline engines for space tug vehicles

NASA Technical Reports Server (NTRS)

Adams, A.

1973-01-01

The Interface Control Document contains engine information necessary for installation of the baseline RL10 Derivative engines in the Space Tug vehicle. The ICD presents a description of the baseline engines and their operating characteristics, mass and load characteristics, and environmental criteria. The document defines the engine/vehicle mechanical, electrical, fluid and pneumatic interface requirements.

Vital Signs: Restraint Use and Motor Vehicle Occupant Death Rates Among Children Aged 0–12 Years — United States, 2002–2011

PubMed Central

Sauber-Schatz, Erin K.; West, Bethany A.; Bergen, Gwen

2014-01-01

Background Motor vehicle crashes are a leading cause of death among children in the United States. Age- and size-appropriate child restraint use is the most effective method for reducing these deaths. Methods CDC analyzed 2002–2011 data from the Fatality Analysis Reporting System to determine the number and rate of motor-vehicle occupant deaths, and the proportion of unrestrained child deaths among children aged <1 year, 1–3 years, 4–7 years, 8–12 years, and for all children aged 0–12 years. Age group–specific death rates and proportions of unrestrained child motor vehicle deaths for 2009–2010 were further stratified by race/ethnicity. Results Motor vehicle occupant death rates for children declined significantly from 2002 to 2011. However, one third (33%) of children who died in 2011 were unrestrained. Compared with white children for 2009–2010, black children had significantly higher death rates, and black and Hispanic children both had significantly higher proportions of unrestrained child deaths. Conclusions Motor vehicle occupant deaths among children in the United States have declined in the past decade, but more deaths could be prevented if restraints were always used. Implications for Public Health Effective interventions, including child passenger restraint laws (with child safety seat/booster seat coverage through at least age 8 years) and child safety seat distribution plus education programs, can increase restraint use and reduce child motor vehicle deaths. PMID:24500292

Investigating methods for determining mismatch in near side vehicle impacts - biomed 2009.

PubMed

Loftis, Kathryn; Martin, R Shayn; Meredith, J Wayne; Stitzel, Joel

2009-01-01

This study investigates vehicle mismatch in severe side-impact motor vehicle collisions. Research conducted by the Insurance Institute for Highway Safety has determined that vehicle mismatch often leads to very severe injuries for occupants in the struck vehicle, because the larger striking vehicle does not engage the lower sill upon impact, resulting in severe intrusions into the occupant compartment. Previous studies have analyzed mismatched collisions according to vehicle type, not by the difference in vehicle height and weight. It is hypothesized that the combination of a heavier striking vehicle at a taller height results in more intrusion for the struck vehicle and severe injury for the near side occupant. By analyzing Crash Injury Research and Engineering Network (CIREN) data and occupant injury severity, it is possible to study intrusion and injuries that occur due to vehicle mismatch. CIREN enrolls seriously injured occupants involved in motor vehicle crashes (MVC) across the United States. From the Toyota-Wake Forest University CIREN center, 23 near side impact cases involving two vehicles were recorded. Only 3 of these seriously injured occupant cases were not considered mismatched according to vehicle curb weight, and only 2 were not considered vehicle mismatched according to height differences. The mismatched CIREN cases had an average difference in vehicle curb weight of 737.0 kg (standard deviation of 646.8) and an average difference in vehicle height of 16.38 cm (standard deviation of 7.186). There were 13 occupants with rib fractures, 12 occupants with pelvic fractures, 9 occupants with pulmonary contusion, and 5 occupants with head injuries, among other multiple injuries. The average Injury Severity Score (ISS) for these occupants was 27, with a standard deviation of 16. The most serious injuries resulted in an Abbreviated Injury Scale (AIS) of 5, which included 3 occupants. Each of these AIS 5 injuries were to different body regions on different

Performance Evaluation of Speech Recognition Systems as a Next-Generation Pilot-Vehicle Interface Technology

NASA Technical Reports Server (NTRS)

Arthur, Jarvis J., III; Shelton, Kevin J.; Prinzel, Lawrence J., III; Bailey, Randall E.

2016-01-01

During the flight trials known as Gulfstream-V Synthetic Vision Systems Integrated Technology Evaluation (GV-SITE), a Speech Recognition System (SRS) was used by the evaluation pilots. The SRS system was intended to be an intuitive interface for display control (rather than knobs, buttons, etc.). This paper describes the performance of the current "state of the art" Speech Recognition System (SRS). The commercially available technology was evaluated as an application for possible inclusion in commercial aircraft flight decks as a crew-to-vehicle interface. Specifically, the technology is to be used as an interface from aircrew to the onboard displays, controls, and flight management tasks. A flight test of a SRS as well as a laboratory test was conducted.

A meta-analysis of human-system interfaces in unmanned aerial vehicle (UAV) swarm management.

PubMed

Hocraffer, Amy; Nam, Chang S

2017-01-01

A meta-analysis was conducted to systematically evaluate the current state of research on human-system interfaces for users controlling semi-autonomous swarms composed of groups of drones or unmanned aerial vehicles (UAVs). UAV swarms pose several human factors challenges, such as high cognitive demands, non-intuitive behavior, and serious consequences for errors. This article presents findings from a meta-analysis of 27 UAV swarm management papers focused on the human-system interface and human factors concerns, providing an overview of the advantages, challenges, and limitations of current UAV management interfaces, as well as information on how these interfaces are currently evaluated. In general allowing user and mission-specific customization to user interfaces and raising the swarm's level of autonomy to reduce operator cognitive workload are beneficial and improve situation awareness (SA). It is clear more research is needed in this rapidly evolving field. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Study of Fluid Interface Configurations in Exploration Vehicle Propellant Tanks

NASA Technical Reports Server (NTRS)

Zimmerli, Gregory A.; Asipauskas, Marius; Chen, Yongkang; Weislogel, Mark M.

2010-01-01

The equilibrium shape and location of fluid interfaces in spacecraft propellant tanks while in low-gravity is of interest to system designers, but can be challenging to predict. The propellant position can affect many aspects of the spacecraft such as the spacecraft center of mass, response to thruster firing due to sloshing, liquid acquisition, propellant mass gauging, and thermal control systems. We use Surface Evolver, a fluid interface energy minimizing algorithm, to investigate theoretical equilibrium liquid-vapor interfaces for spacecraft propellant tanks similar to those that have been considered for NASA's new class of Exploration vehicles. The choice of tank design parameters we consider are derived from the NASA Exploration Systems Architecture Study report. The local acceleration vector employed in the computations is determined by estimating low-Earth orbit (LEO) atmospheric drag effects and centrifugal forces due to a fixed spacecraft orientation with respect to the Earth or Moon, and rotisserie-type spacecraft rotation. Propellant/vapor interface positions are computed for the Earth Departure Stage and Altair lunar lander descent and ascent stage tanks for propellant loads applicable to LEO and low-lunar orbit. In some of the cases investigated the vapor ullage bubble is located at the drain end of the tank, where propellant management device hardware is often located.

Crash pulse optimization for occupant protection at various impact velocities.

PubMed

Ito, Daisuke; Yokoi, Yusuke; Mizuno, Koji

2015-01-01

Vehicle deceleration has a large influence on occupant kinematic behavior and injury risks in crashes, and the optimization of the vehicle crash pulse that mitigates occupant loadings has been the subject of substantial research. These optimization research efforts focused on only high-velocity impact in regulatory or new car assessment programs though vehicle collisions occur over a wide range of velocities. In this study, the vehicle crash pulse was optimized for various velocities with a genetic algorithm. Vehicle deceleration was optimized in a full-frontal rigid barrier crash with a simple spring-mass model that represents the vehicle-occupant interaction and a Hybrid III 50th percentile male multibody model. To examine whether the vehicle crash pulse optimized at the high impact velocity is useful for reducing occupant loading at all impact velocities less than the optimized velocity, the occupant deceleration was calculated at various velocities for the optimized crash pulse determined at a high speed. The optimized vehicle deceleration-deformation characteristics that are effective for various velocities were investigated with 2 approaches. The optimized vehicle crash pulse at a single impact velocity consists of a high initial impulse followed by zero deceleration and then constant deceleration in the final stage. The vehicle deceleration optimized with the Hybrid III model was comparable to that determined from the spring-mass model. The optimized vehicle deceleration-deformation characteristics determined at a high speed did not necessarily lead to an occupant deceleration reduction at a lower velocity. The maximum occupant deceleration at each velocity was normalized by the maximum deceleration determined in the single impact velocity optimization. The resulting vehicle deceleration-deformation characteristic was a square crash pulse. The objective function was defined as the number of injuries, which was the product of the number of collisions at the

The influence of personal protection equipment, occupant body size, and restraint system on the frontal impact responses of Hybrid III ATDs in tactical vehicles.

PubMed

Zaseck, Lauren Wood; Orton, Nichole Ritchie; Gruber, Rebekah; Rupp, Jonathan; Scherer, Risa; Reed, Matthew; Hu, Jingwen

2017-08-18

Although advanced restraint systems, such as seat belt pretensioners and load limiters, can provide improved occupant protection in crashes, such technologies are currently not utilized in military vehicles. The design and use of military vehicles presents unique challenges to occupant safety-including differences in compartment geometry and occupant clothing and gear-that make direct application of optimal civilian restraint systems to military vehicles inappropriate. For military vehicle environments, finite element (FE) modeling can be used to assess various configurations of restraint systems and determine the optimal configuration that minimizes injury risk to the occupant. The models must, however, be validated against physical tests before implementation. The objective of this study was therefore to provide the data necessary for FE model validation by conducting sled tests using anthropomorphic test devices (ATDs). A secondary objective of this test series was to examine the influence of occupant body size (5th percentile female, 50th percentile male, and 95th percentile male), military gear (helmet/vest/tactical assault panels), seat belt type (3-point and 5-point), and advanced seat belt technologies (pretensioner and load limiter) on occupant kinematics and injury risk in frontal crashes. In total, 20 frontal sled tests were conducted using a custom sled buck that was reconfigurable to represent both the driver and passenger compartments of a light tactical military vehicle. Tests were performed at a delta-V of 30 mph and a peak acceleration of 25 g. The sled tests used the Hybrid III 5th percentile female, 50th percentile male, and 95th percentile male ATDs outfitted with standard combat boots and advanced combat helmets. In some tests, the ATDs were outfitted with additional military gear, which included an improved outer tactical vest (IOTV), IOTV and squad automatic weapon (SAW) gunner with a tactical assault panel (TAP), or IOTV and rifleman with

Underutilization of occupant restraint systems in motor vehicle injury crashes: A quantitative analysis from Qatar.

PubMed

El-Menyar, Ayman; Consunji, Rafael; Asim, Mohammad; Abdelrahman, Husham; Zarour, Ahmad; Parchani, Ashok; Peralta, Ruben; Al-Thani, Hassan

2016-01-01

Restraint systems (seat belts and airbags) are important tools that improve vehicle occupant safety during motor vehicle crashes (MVCs). We aimed to identify the pattern and impact of the utilization of passenger restraint systems on the outcomes of MVC victims in Qatar. A retrospective study was conducted for all admitted patients who sustained MVC-related injuries between March 2011 and March 2014 inclusive. Out of 2,730 road traffic injury cases, 1,830 (67%) sustained MVC-related injuries, of whom 88% were young males, 70% were expatriates, and 53% were drivers. The use of seat belts and airbags was documented in 26 and 2.5% of cases, respectively. Unrestrained passengers had greater injury severity scores, longer hospital stays, and higher rates of pneumonia and mortality compared to restrained passengers (P = .001 for all). There were 311 (17%) ejected cases. Seat belt use was significantly lower and the mortality rate was 3-fold higher in the ejected group compared to the nonejected group (P = .001). The overall mortality was 8.3%. On multivariate regression analysis, predictors of not using a seat belt were being a front seat passenger, driver, or Qatari national and young age. Unrestrained males had a 3-fold increase in mortality in comparison to unrestrained females. The risk of severe injury (relative risk [RR] = 1.82, 95% confidence interval [CI], 1.49-2.26, P = .001) and death (RR = 4.13, 95% CI, 2.31-7.38, P = .001) was significantly greater among unrestrained passengers. The nonuse of seat belts is associated with worse outcomes during MVCs in Qatar. Our study highlights the lower rate of seat belt compliance in young car occupants that results in more severe injuries, longer hospital stays, and higher mortality rates. Therefore, we recommend more effective seat belt awareness and education campaigns, the enforcement of current seat belt laws, their extension to all vehicle occupants, and the adoption of proven interventions that will assure sustained

Human machine interface to manually drive rhombic like vehicles in remote handling operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopes, Pedro; Vale, Alberto; Ventura, Rodrigo

2015-07-01

In the thermonuclear experimental reactor ITER, a vehicle named CTS is designed to transport a container with activated components inside the buildings. In nominal operations, the CTS is autonomously guided under supervision. However, in some unexpected situations, such as in rescue and recovery operations, the autonomous mode must be overridden and the CTS must be remotely guided by an operator. The CTS is a rhombic-like vehicle, with two drivable and steerable wheels along its longitudinal axis, providing omni-directional capabilities. The rhombic kinematics correspond to four control variables, which are difficult to manage in manual mode operation. This paper proposes amore » Human Machine Interface (HMI) to remotely guide the vehicle in manual mode. The proposed solution is implemented using a HMI with an encoder connected to a micro-controller and an analog 2-axis joystick. Experimental results were obtained comparing the proposed solution with other controller devices in different scenarios and using a software platform that simulates the kinematics and dynamics of the vehicle. (authors)« less

Seating Considerations for Spaceflight: The Human to Machine Interface

NASA Technical Reports Server (NTRS)

Gohmert, Dustin M.

2011-01-01

Seating is one of the most critical components to be considered during design of a spacecraft. Since seats are the final interface between the occupant and the vehicle wherein all launch and landing operations are performed, significant effort must be spent to ensure proper integration of the human to the spacecraft. The importance of seating can be divided into two categories: seat layout and seat design. The layout of the seats drives the overall cabin configuration - from displays and controls, to windows, to stowage, to egress paths. Since the layout of the seats is such a critical design parameter within the crew compartment, it is one of the first design challenges that must be completed in the critical path of the spacecraft design. In consideration of seat layout in the vehicle, it is important for the designers to account for often intangible factors such as safety, operability, contingency performance, crew rescue. Seat layout will lead to definition of the quantity, shape, and posture of the seats. The seats of the craft must restrain and protect the occupant in all seated phases of flight, while allowing for nominal mission performance. In design of a spacecraft seat, the general posture of the occupant and the landing loads to be encountered are the greatest drivers of overall design. Variances, such as upright versus recumbent postures will dictate fit of the seat to the occupant and drive the total envelope of the seat around the occupant. Seat design revolves around applying sound principles of seated occupant protection coupled with the unique environments driven by the seat layout, landing loads, and operational and emergency scenarios.

Seating Considerations for Spaceflight: The Human to Machine Interface

NASA Astrophysics Data System (ADS)

Gohmert, D. M.

2012-01-01

Seating is one of the most critical components to be considered during design of a spacecraft. Since seats are the final interface between the occupant and the vehicle wherein all launch and landing operations are performed, significant effort must be spent to ensure proper integration of the human to the spacecraft. The importance of seating can be divided into two categories: seat layout and seat design. The layout of the seats drives the overall cabin configuration - from displays and controls, to windows, to stowage, to egress paths. Since the layout of the seats is such a critical design parameter within the crew compartment, it is one of the first design challenges that must be completed in the critical path of the spacecraft design. In consideration of seat layout in the vehicle, it is important for the designers to account for often intangible factors such as safety, operability, contingency performance, and crew rescue. Seat layout will lead to definition of the quantity, shape, and posture of the seats. The seats of the craft must restrain and protect the occupant in all seated phases of flight, while allowing for nominal mission performance. In design of a spacecraft seat, the general posture of the occupant and the landing loads to be encountered are the greatest drivers of overall design. Variances, such as upright versus recumbent postures will dictate fit of the seat to the occupant and drive the total envelope of the seat around the occupant. Seat design revolves around applying sound principles of seated occupant protection coupled with the unique environments driven by the seat layout, landing loads, and operational and emergency scenarios.

Operator interface for vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bissontz, Jay E

2015-03-10

A control interface for drivetrain braking provided by a regenerative brake and a non-regenerative brake is implemented using a combination of switches and graphic interface elements. The control interface comprises a control system for allocating drivetrain braking effort between the regenerative brake and the non-regenerative brake, a first operator actuated control for enabling operation of the drivetrain braking, and a second operator actuated control for selecting a target braking effort for drivetrain braking. A graphic display displays to an operator the selected target braking effort and can be used to further display actual braking effort achieved by drivetrain braking.

Occupant Motion Sensors

DOT National Transportation Integrated Search

1971-03-01

An analysis was made of methods for measuring vehicle occupant motion during crash or impact conditions. The purpose of the measurements is to evaluate restraint performance using human, anthropometric dummy, or animal occupants. A detailed Fourier f...

System interface for an integrated intelligent safety system (ISS) for vehicle applications.

PubMed

Hannan, Mahammad A; Hussain, Aini; Samad, Salina A

2010-01-01

This paper deals with the interface-relevant activity of a vehicle integrated intelligent safety system (ISS) that includes an airbag deployment decision system (ADDS) and a tire pressure monitoring system (TPMS). A program is developed in LabWindows/CVI, using C for prototype implementation. The prototype is primarily concerned with the interconnection between hardware objects such as a load cell, web camera, accelerometer, TPM tire module and receiver module, DAQ card, CPU card and a touch screen. Several safety subsystems, including image processing, weight sensing and crash detection systems, are integrated, and their outputs are combined to yield intelligent decisions regarding airbag deployment. The integrated safety system also monitors tire pressure and temperature. Testing and experimentation with this ISS suggests that the system is unique, robust, intelligent, and appropriate for in-vehicle applications.

System Interface for an Integrated Intelligent Safety System (ISS) for Vehicle Applications

PubMed Central

Hannan, Mahammad A.; Hussain, Aini; Samad, Salina A.

2010-01-01

This paper deals with the interface-relevant activity of a vehicle integrated intelligent safety system (ISS) that includes an airbag deployment decision system (ADDS) and a tire pressure monitoring system (TPMS). A program is developed in LabWindows/CVI, using C for prototype implementation. The prototype is primarily concerned with the interconnection between hardware objects such as a load cell, web camera, accelerometer, TPM tire module and receiver module, DAQ card, CPU card and a touch screen. Several safety subsystems, including image processing, weight sensing and crash detection systems, are integrated, and their outputs are combined to yield intelligent decisions regarding airbag deployment. The integrated safety system also monitors tire pressure and temperature. Testing and experimentation with this ISS suggests that the system is unique, robust, intelligent, and appropriate for in-vehicle applications. PMID:22205861

Design considerations to improve cognitive ergonomic issues of unmanned vehicle interfaces utilizing video game controllers.

PubMed

Oppold, P; Rupp, M; Mouloua, M; Hancock, P A; Martin, J

2012-01-01

Unmanned (UAVs, UCAVs, and UGVs) systems still have major human factors and ergonomic challenges related to the effective design of their control interface systems, crucial to their efficient operation, maintenance, and safety. Unmanned system interfaces with a human centered approach promote intuitive interfaces that are easier to learn, and reduce human errors and other cognitive ergonomic issues with interface design. Automation has shifted workload from physical to cognitive, thus control interfaces for unmanned systems need to reduce mental workload on the operators and facilitate the interaction between vehicle and operator. Two-handed video game controllers provide wide usability within the overall population, prior exposure for new operators, and a variety of interface complexity levels to match the complexity level of the task and reduce cognitive load. This paper categorizes and provides taxonomy for 121 haptic interfaces from the entertainment industry that can be utilized as control interfaces for unmanned systems. Five categories of controllers were based on the complexity of the buttons, control pads, joysticks, and switches on the controller. This allows the selection of the level of complexity needed for a specific task without creating an entirely new design or utilizing an overly complex design.

The association between price of regular-grade gasoline and injury and mortality rates among occupants involved in motorcycle- and automobile-related motor vehicle collisions.

PubMed

Hyatt, Eddie; Griffin, Russell; Rue, Loring W; McGwin, Gerald

2009-09-01

Motorcyclists have been reported to be more likely to die in a motor vehicle collision (MVC) than automobile occupants. With the recent increase in the pump price of gasoline, it has been reported that people are switching to motorcycles as main modes of transportation. This study evaluated the association between motor vehicle collision-related injury and mortality rates and increases in gasoline prices for occupants of automobiles and riders of motorcycles. There were an estimated 1,270,512 motorcycle MVC and 238,390,853 automobile MVC involved occupants in the U.S. from 1992 to 2007. Higher gasoline prices were associated with increased motorcycle-related injuries and deaths; however, this association no longer remained after accounting for changes in the number of registered vehicles. The current study observed that, while the number of injuries and fatalities in motorcycle-related MVCs increase with increasing gasoline price, rates remained largely unchanged. This suggests that the observed increase in motorcycle-related injuries and fatalities with increasing gasoline price is more a factor of the number of motorcycles on the road rather than operator characteristics.

Pilot vehicle interface on the advanced fighter technology integration F-16

NASA Technical Reports Server (NTRS)

Dana, W. H.; Smith, W. B.; Howard, J. D.

1986-01-01

This paper focuses on the work load aspects of the pilot vehicle interface in regard to the new technologies tested during AMAS Phase II. Subjects discussed in this paper include: a wide field-of-view head-up display; automated maneuvering attack system/sensor tracker system; master modes that configure flight controls and mission avionics; a modified helmet mounted sight; improved multifunction display capability; a voice interactive command system; ride qualities during automated weapon delivery; a color moving map; an advanced digital map display; and a g-induced loss-of-consciousness and spatial disorientation autorecovery system.

Vital Signs: Health Burden and Medical Costs of Nonfatal Injuries to Motor Vehicle Occupants — United States, 2012

PubMed Central

Bergen, Gwen; Peterson, Cora; Ederer, David; Florence, Curtis; Haileyesus, Tadesse; Kresnow, Marcie-jo; Xu, Likang

2014-01-01

Background Motor vehicle crashes are a leading cause of death and injury in the United States. The purpose of this study was to describe the current health burden and medical and work loss costs of nonfatal crash injuries among vehicle occupants in the United States. Methods CDC analyzed data on emergency department (ED) visits resulting from nonfatal crash injuries among vehicle occupants in 2012 using the National Electronic Injury Surveillance System – All Injury Program (NEISS-AIP) and the Healthcare Cost and Utilization Project National Inpatient Sample (HCUP-NIS). The number and rate of all ED visits for the treatment of crash injuries that resulted in the patient being released and the number and rate of hospitalizations for the treatment of crash injuries were estimated, as were the associated number of hospital days and lifetime medical and work loss costs. Results In 2012, an estimated 2,519,471 ED visits resulted from nonfatal crash injuries, with an estimated lifetime medical cost of $18.4 billion (2012 U.S. dollars). Approximately 7.5% of these visits resulted in hospitalizations that required an estimated 1,057,465 hospital days in 2012. Conclusions Nonfatal crash injuries occur frequently and result in substantial costs to individuals, employers, and society. For each motor vehicle crash death in 2012, eight persons were hospitalized, and 100 were treated and released from the ED. Implications for Public Health Public health practices and laws, such as primary seat belt laws, child passenger restraint laws, ignition interlocks to prevent alcohol impaired driving, sobriety checkpoints, and graduated driver licensing systems have demonstrated effectiveness for reducing motor vehicle crashes and injuries. They might also substantially reduce associated ED visits, hospitalizations, and medical costs. PMID:25299606

Estimation of payload loads using rigid body interface accelerations. [in structural design of launch vehicle systems

NASA Technical Reports Server (NTRS)

Chen, J. C.; Garba, J. A.; Wada, B. K.

1978-01-01

In the design/analysis process of a payload structural system, the accelerations at the payload/launch vehicle interface obtained from a system analysis using a rigid payload are often used as the input forcing function to the elastic payload to obtain structural design loads. Such an analysis is at best an approximation since the elastic coupling effects are neglected. This paper develops a method wherein the launch vehicle/rigid payload interface accelerations are modified to account for the payload elasticity. The advantage of the proposed method, which is exact to the extent that the physical system can be described by a truncated set of generalized coordinates, is that the complete design/analysis process can be performed within the organization responsible for the payload design. The method requires the updating of the system normal modes to account for payload changes, but does not require a complete transient solution using the composite system model. An application to a real complex structure, the Viking Spacecraft System, is given.

Investigation on occupant injury severity in rear-end crashes involving trucks as the front vehicle in Beijing area, China.

PubMed

Yuan, Quan; Lu, Meng; Theofilatos, Athanasios; Li, Yi-Bing

2017-02-01

Rear-end crashes attribute to a large portion of total crashes in China, which lead to many casualties and property damage, especially when involving commercial vehicles. This paper aims to investigate the critical factors for occupant injury severity in the specific rear-end crash type involving trucks as the front vehicle (FV). This paper investigated crashes occurred from 2011 to 2013 in Beijing area, China and selected 100 qualified cases i.e., rear-end crashes involving trucks as the FV. The crash data were supplemented with interviews from police officers and vehicle inspection. A binary logistic regression model was used to build the relationship between occupant injury severity and corresponding affecting factors. Moreover, a multinomial logistic model was used to predict the likelihood of fatal or severe injury or no injury in a rear-end crash. The results provided insights on the characteristics of driver, vehicle and environment, and the corresponding influences on the likelihood of a rear-end crash. The binary logistic model showed that drivers' age, weight difference between vehicles, visibility condition and lane number of road significantly increased the likelihood for severe injury of rear-end crash. The multinomial logistic model and the average direct pseudo-elasticity of variables showed that night time, weekdays, drivers from other provinces and passenger vehicles as rear vehicles significantly increased the likelihood of rear drivers being fatal. All the abovementioned significant factors should be improved, such as the conditions of lighting and the layout of lanes on roads. Two of the most common driver factors are drivers' age and drivers' original residence. Young drivers and outsiders have a higher injury severity. Therefore it is imperative to enhance the safety education and management on the young drivers who steer heavy duty truck from other cities to Beijing on weekdays. Copyright © 2016 Daping Hospital and the Research Institute of

Impact of exempt vehicles on managed lanes.

DOT National Transportation Integrated Search

2014-01-15

In order to better utilize available capacity in high-occupancy vehicle (HOV) lanes, states are permitted to allow certain qualifying non-HOVs to use HOV lanes. In general, states may allow motorcycles, public transportation vehicles, high-occupancy ...

Injury pattern as an indication of seat belt failure in ejected vehicle occupants.

PubMed

Freeman, Michael D; Eriksson, Anders; Leith, Wendy

2014-09-01

Prior authors have suggested that when occupant ejection occurs in association with a seat belt failure, entanglement of the outboard upper extremity (OUE) with the retracting shoulder belt will invariably occur, leaving injury pattern evidence of belt use. In the present investigation, the authors assessed this theory using data accessed from the NASS-CDS for ejected front seat occupants of passenger vehicles. Logistic regression models were used to assess the associations between seat belt failure status and injuries. Injury types associated with seat belt failure were significant OUE and head injuries (OR = 3.87, [95% CI 1.2, 13.0] and 3.1, [95% CI 1.0, 9.7], respectively). The two injury types were found to be a predictor of seat belt use and subsequent failure only if combined with a high (≥0.8) precrash probability of belt use. The injury pattern associated with a seat belt failure-related ejection has limited use in the forensic investigation of crash-related ejections. © 2014 American Academy of Forensic Sciences.

Subjective and objective evaluation of sense of space for vehicle occupants based on anthropometric data.

PubMed

Hiamtoe, Pitarn; Steinhardt, Florian; Köhler, Uwe; Bengler, Klaus

2012-01-01

At present, the number of the vehicle requirements has been continuously increasing. These requirements can be related to the customer as well as the technical requirements. Among these, the "feeling of space" of the occupants inside the vehicles can be regarded as one of the most important factors. In this respect, the driver and passengers should be able to experience positive feeling of space inside the vehicle. There are numerous factors that can influence the sense of space inside the vehicle. These include geometry (vehicle dimensions), light exposure, ambient lights, colors, material selection and material surface. Depending on the selection, the sense of space can be dramatically influenced by these factors. In general, human feeling is subjective and cannot be measured by any instrument. The measure can nevertheless be carried out by utilizing the method of subjective evaluation. Throughout the experiments, the method of evaluation is developed and the factors which can influence the interior feeling are analyzed. In this process, psychological perception, architectural aspects and anthropometry are considered and knowledge from the other domains is transferred in the form of a multidisciplinary approach. The experiments with an aim to evaluate the overall sense of space in the vehicle are carried out based on the physical mock up of BMW 1 series (E87). The space perception with different interior dimensions and anthropometric data of test persons are also analyzed. The use of Computer Aided Technology was shown by CATIA V5, PCMAN and RAMSIS. The results show a good correlation between the subjective evaluation and the geometric values.

Blast mines: physics, injury mechanisms and vehicle protection.

PubMed

Ramasamy, A; Hill, A M; Hepper, A E; Bull, A M J; Clasper, J C

2009-12-01

Since World War II, more vehicles have been lost to land mines than all other threats combined. Anti-vehicular (AV) mines are capable of disabling a heavy vehicle, or completely destroying a lighter vehicle. The most common form of AV mine is the blast mine, which uses a large amount of explosive to directly damage the target. In a conventional military setting, landmines are used as a defensive force-multiplier and to restrict the movements of the opposing force. They are relatively cheap to purchase and easy to acquire, hence landmines are also potent weapons in the insurgents' armamentarium. The stand-offnature of its design has allowed insurgents to cause significant injuries to security forces in current conflicts with little personal risk. As a result, AV mines and improvised explosive devices (IEDs) have become the most common cause of death and injury to Coalition and local security forces operating in Iraq and Afghanistan. Detonation of an AV mine causes an explosive, exothermic reaction which results in the formation of a shockwave followed by a rapid expansion of gases. The shockwave is mainly reflected by the soillair interface and fractures the soil cap overthe mine. The detonation products then vent through the voids in the soil, resulting in a hollow inverse cone which consists of the detonation gases surrounded by the soil ejecta. It is the combination of the detonation products and soil ejecta that interact with the target vehicle and cause injury to the vehicle occupants. A number of different strategies are required to mitigate the blast effects of an explosion. Primary blast effects can be reduced by increasing the standoff distance between the seat of the explosion and the crew compartment. Enhancement of armour on the base of the vehicle, as well as improvements in personal protection can prevent penetration of fragments. Mitigating tertiary effects can be achieved by altering the vehicle geometry and structure, increasing vehicle mass, as

Relationship of hemoglobin to occupational exposure to motor vehicle exhaust.

PubMed

Potula, V; Hu, H

1996-01-01

To study the relationship of hemoglobin to exposure to motor vehicle exhaust. Survey. Traffic police, bus drivers, and auto-shop workers (all exposed to auto exhaust in Madras, India) and unexposed office workers. We measured levels of blood lead (by graphite furnace atomic absorption spectrophotometry), and hemoglobin. Information also was collected on age, employment duration, smoking status, alcohol ingestion, and diet type (vegetarian or nonvegetarian). Increasing exposure to motor vehicle exhaust, as reflected by job category, was significantly associated with lower levels of hemoglobin (p < 0.01). A final multivariate regression model was constructed that began with indicator variables for each job (with office workers as the reference category) and included age, duration of employment, blood lead level, alcohol ingestion, dietary type, and smoking status. After a backward-elimination procedure, employment duration as an auto-shop worker or bus driver remained as significant correlates of lower hemoglobin level and current smoking and long employment duration as significant correlates of higher hemoglobin level. Occupational exposure to automobile exhaust may be a risk factor for decreased hemoglobin level in Madras. This effect appears to be independent of blood lead level and may represent hematopoietic suppression incurred by benzene or accumulated lead burden (which is not well reflected by blood lead levels). Smoking probably increased hemoglobin level through the chronic effects of exposure to carbon monoxide. In this study, a long employment duration may have served as a proxy for better socioeconomic, and therefore, better nutritional status.

Identifying work-related motor vehicle crashes in multiple databases.

PubMed

Thomas, Andrea M; Thygerson, Steven M; Merrill, Ray M; Cook, Lawrence J

2012-01-01

To compare and estimate the magnitude of work-related motor vehicle crashes in Utah using 2 probabilistically linked statewide databases. Data from 2006 and 2007 motor vehicle crash and hospital databases were joined through probabilistic linkage. Summary statistics and capture-recapture were used to describe occupants injured in work-related motor vehicle crashes and estimate the size of this population. There were 1597 occupants in the motor vehicle crash database and 1673 patients in the hospital database identified as being in a work-related motor vehicle crash. We identified 1443 occupants with at least one record from either the motor vehicle crash or hospital database indicating work-relatedness that linked to any record in the opposing database. We found that 38.7 percent of occupants injured in work-related motor vehicle crashes identified in the motor vehicle crash database did not have a primary payer code of workers' compensation in the hospital database and 40.0 percent of patients injured in work-related motor vehicle crashes identified in the hospital database did not meet our definition of a work-related motor vehicle crash in the motor vehicle crash database. Depending on how occupants injured in work-related motor crashes are identified, we estimate the population to be between 1852 and 8492 in Utah for the years 2006 and 2007. Research on single databases may lead to biased interpretations of work-related motor vehicle crashes. Combining 2 population based databases may still result in an underestimate of the magnitude of work-related motor vehicle crashes. Improved coding of work-related incidents is needed in current databases.

Traffic safety facts 1993 : occupant protection

DOT National Transportation Integrated Search

1994-01-01

In 1993, 26,873 front-seat occupants of passenger vehicles (cars, light trucks, vans, and utility vehicles) were killed in motor vehicle traffic crashes, 67 percent of the 40,115 traffic fatalities reported for the year. Among front-seat passenger ve...

[Fatal occupational accidents in Lombardy].

PubMed

Pianosi, G

1995-01-01

All fatal occupational accidents compensated in Lombardy from 1984 to 1989 were analyzed (1259 cases): significant differences between geographical distribution of fatal occupational accidents and workers were observed. Males accounted for about 95% of fatalities; an excess of cases was shown in both young and elderly workers. Death was the consequence of injuries involving most frequently the head, thorax and spinal cord. An excess of fatalities was observed in agriculture and, at a lower level, in manufacturing industries; small enterprises were involved in approximately 25% of fatalities occurring in the manufacturing industries and services. Employers were the victims of fatal accidents in 50% of cases in agriculture and in 70% of cases in craft industries. Construction, agriculture and transport accounted for about 50% of all fatalities. About 50% of fatal occupational accidents were related to vehicle use: the victim was the driver in the majority of cases, sometimes the victim was run over by a vehicle or fell from a vehicle. The results agree with some previous observations (e.g.: sex and age distribution; construction, agriculture and transport as working activities at high accident risk); but some original observations have emerged, in particular about the frequency of employers as victims and the role of vehicles in the genesis of fatal occupational accidents. If further studies confirm these latter observations, important developments could follow in preventive action design and implementation.

Association Between NCAP Ratings and Real-World Rear Seat Occupant Risk of Injury.

PubMed

Metzger, Kristina B; Gruschow, Siobhan; Durbin, Dennis R; Curry, Allison E

2015-01-01

Several studies have evaluated the correlation between U.S. or Euro New Car Assessment Program (NCAP) ratings and injury risk to front seat occupants, in particular driver injuries. Conversely, little is known about whether NCAP 5-star ratings predict real-world risk of injury to restrained rear seat occupants. The NHTSA has identified rear seat occupant protection as a specific area under consideration for improvements to its NCAP. In order to inform NHTSA's efforts, we examined how NCAP's current 5-star rating system predicts risk of moderate or greater injury among restrained rear seat occupants in real-world crashes. We identified crash-involved vehicles, model year 2004-2013, in NASS-CDS (2003-2012) with known make and model and nonmissing occupant information. We manually matched these vehicles to their NCAP star ratings using data on make, model, model year, body type, and other identifying information. The resultant linked NASS-CDS and NCAP database was analyzed to examine associations between vehicle ratings and rear seat occupant injury risk; risk to front seat occupants was also estimated for comparison. Data were limited to restrained occupants and occupant injuries were defined as any injury with a maximum Abbreviated Injury Scale (AIS) score of 2 or greater. We linked 95% of vehicles in NASS-CDS to a specific vehicle in NCAP. The 18,218 vehicles represented an estimated 6 million vehicles with over 9 million occupants. Rear seat passengers accounted for 12.4% of restrained occupants. The risk of injury in all crashes for restrained rear seat occupants was lower in vehicles with a 5-star driver rating in frontal impact tests (1.4%) than with 4 or fewer stars (2.6%, P =.015); results were similar for the frontal impact passenger rating (1.3% vs. 2.4%, P =.024). Conversely, side impact driver and passenger crash tests were not associated with rear seat occupant injury risk (driver test: 1.7% for 5-star vs. 1.8% for 1-4 stars; passenger test: 1.6% for 5

77 FR 39795 - Notice of Final Federal Agency Actions on the Interstate 395 High Occupancy (HOV) Vehicle Ramp at...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

... actions subject to 23 U.S.C. 139(l)(1). A claim seeking judicial review of the Federal agency actions on...: Federal Highway Administration (FHWA), DOT. ACTION: Notice of Limitation on Claims for Judicial Review of... meaning of 23 U.S.C. 139(l)(1). The actions relate to the Interstate 395 High Occupancy Vehicle (HOV) Ramp...

Head impact contact points for restrained child occupants.

PubMed

Arbogast, Kristy B; Wozniak, Samantha; Locey, Caitlin M; Maltese, Matthew R; Zonfrillo, Mark R

2012-01-01

Head injuries are the most common injuries sustained by children in motor vehicle crashes regardless of age, restraint, and crash direction. For rear seat occupants, the interaction of the subject with the seat back and the vehicle side interior structures has been previously highlighted. In order to advance this knowledge to the development of countermeasures, a summary of vehicle components that contributed to these injuries is needed. Therefore, the objective of this study was to create a contact map of the vehicle interior for head and face injuries to rear-seated restrained children in front crashes. The Crash Injury Research and Engineering Network (CIREN) was queried for rear-seated, restrained child occupants (age 0-15 years) in forward-facing child restraints, booster seats, or lap and shoulder belts who sustained an AIS2+ head and/or face injury in a frontal motor vehicle crash. Cases were analyzed to describe injury patterns and injury causation scenarios. A contact point map was developed to summarize the vehicle components related to injury causation of the head/face injury. Twenty-one cases met the combined inclusion and exclusion criteria. Seven of the child occupants were restrained in forward-facing child restraints, 2 in belt-positioning booster seats, and 12 in lap and shoulder belts. There were 28 head and 17 facial injuries. For left rear occupants, the most common contact point was the pillar in front of the occupant's seat row; that is, B-pillar for second-row occupants, indicating a leftward kinematics. For right rear occupants, due to differences in crash dynamics, the most common contact point location was the passenger's seat back, suggesting that these occupants moved predominantly forward. Contact points associated with head/face injury for restrained children 0 to 15 years in frontal crashes have been delineated. In a majority of the cases, the head/face injury was the most severe injury and severe injuries to other body regions were

Travel demand management : a toolbox of strategies to reduce single\\0x2010occupant vehicle trips and increase alternate mode usage in Arizona.

DOT National Transportation Integrated Search

2012-02-01

The report provides a suite of recommended strategies to reduce single-occupant vehicle traffic in the urban : areas of Phoenix and Tucson, Arizona, which are presented as a travel demand management toolbox. The : toolbox includes supporting research...

Evaluation of the high occupancy vehicle (HOV) lanes on the Long Island Expressway : January 1997 HOV lane user and non-user survey

DOT National Transportation Integrated Search

1997-01-01

As part of the periodic evaluation of the High Occupancy Vehicle (HOV) lanes on the Long Island Expressway, an HOV lane user/non-user survey was conducted in January 1997. The survey included users of the HOV lanes during the HOV-reserved hours, HOV ...

Electric vehicle station equipment for grid-integrated vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kempton, Willett; Kiamilev, Fouad; McGee, Rodney

Methods, systems, and apparatus transferring power between the grid and an electric vehicle are disclosed. The apparatus may include at least one vehicle communication port for interfacing with electric vehicle equipment (EVE) and a processor coupled to the at least one vehicle communication port to establish communication with the EVE, receive EVE attributes from the EVE, and transmit electric vehicle station equipment (EVSE) attributes to the EVE. Power may be transferred between the grid and the electric vehicle by maintaining EVSE attributes, establishing communication with the EVE, and transmitting the EVSE maintained attributes to the EVE.

Supporting the Loewenstein occupational therapy cognitive assessment using distributed user interfaces.

PubMed

Tesoriero, Ricardo; Gallud Lazaro, Jose A; Altalhi, Abdulrahman H

2017-02-01

Improve the quantity and quality of information obtained from traditional Loewenstein Occupational Therapy Cognitive Assessment Battery systems to monitor the evolution of patients' rehabilitation process as well as to compare different rehabilitation therapies. The system replaces traditional artefacts with virtual versions of them to take advantage of cutting edge interaction technology. The system is defined as a Distributed User Interface (DUI) supported by a display ecosystem, including mobile devices as well as multi-touch surfaces. Due to the heterogeneity of the devices involved in the system, the software technology is based on a client-server architecture using the Web as the software platform. The system provides therapists with information that is not available (or it is very difficult to gather) using traditional technologies (i.e. response time measurements, object tracking, information storage and retrieval facilities, etc.). The use of DUIs allows therapists to gather information that is unavailable using traditional assessment methods as well as adapt the system to patients' profile to increase the range of patients that are able to take this assessment. Implications for Rehabilitation Using a Distributed User Interface environment to carry out LOTCAs improves the quality of the information gathered during the rehabilitation assessment. This system captures physical data regarding patient's interaction during the assessment to improve the rehabilitation process analysis. Allows professionals to adapt the assessment procedure to create different versions according to patients' profile. Improves the availability of patients' profile information to therapists to adapt the assessment procedure.

Injury Risk for Rear-Seated Occupants in Small Overlap Crashes

PubMed Central

Arbogast, Kristy B.; Locey, Caitlin M.; Hammond, Rachel; Belwadi, Aditya

2013-01-01

Small overlap crashes, where the primary crash engagement is outboard from the longitudinal energy absorbing structures of the vehicle, have received recent interest as a crash dynamic that results in high likelihood of injury. Previous analyses of good performing vehicles showed that 24% of crashes with AIS 3+ injuries to front seat occupants were small overlap crashes. However, similar evaluations have not been conducted for those rear seated. Vehicle dynamics suggest that rear seat occupants may be at greater risk due to lack of lateral seating support and a steering wheel to hold, making them more sensitive to lateral movement seen in these crashes. Thus, the objective was to calculate injury risk for rear-seated occupants in small overlap collisions. AIS 2+ and AIS 3+ injury risk was calculated from NASS-CDS data from 2000–2011. Inclusion criteria were vehicles of model year 2000 or later, with CDC codes of “FL” or “FR”, and an occupant in the second or third row. AIS2+ injury risk was 5.1%, and AIS3+ injury risk was 2.4%. Of note, half of the occupants were <15 years of age indicating rear seat protection should emphasize the young. Occupants seated near side were nearly three times as likely to sustain an AIS2+ injury than occupants seated far side. Particular attention should be paid to the prominence of head injuries in this crash dynamic and consideration given to their mitigation. Additional research should determine whether countermeasures being implemented for front seat occupants can be beneficial to rear seat occupants. PMID:24406964

Human machine interface to manually drive rhombic like vehicles such as transport casks in ITER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopes, Pedro; Vale, Alberto; Ventura, Rodrigo

2015-07-01

The Cask and Plug Remote Handling System (CPRHS) and the respective Cask Transfer System (CTS) are designed to transport activated components between the reactor and the hot cell buildings of ITER during maintenance operations. In nominal operation, the CPRHS/CTS shall operate autonomously under human supervision. However, in some unexpected situations, the automatic mode must be overridden and the vehicle must be remotely guided by a human operator due to the harsh conditions of the environment. The CPRHS/CTS is a rhombic-like vehicle with two independent steerable and drivable wheels along its longitudinal axis, giving it omni-directional capabilities. During manual guidance, themore » human operator has to deal with four degrees of freedom, namely the orientations and speeds of two wheels. This work proposes a Human Machine Interface (HMI) to manage the degrees of freedom and to remotely guide the CPRHS/CTS in ITER taking the most advantages of rhombic like capabilities. Previous work was done to drive each wheel independently, i.e., control the orientation and speed of each wheel independently. The results have shown that the proposed solution is inefficient. The attention of the human operator becomes focused in a single wheel. In addition, the proposed solution cannot assure that the commands accomplish the physical constrains of the vehicle, resulting in slippage or even in clashes. This work proposes a solution that consists in the control of the vehicle looking at the position of its center of mass and its heading in the world frame. The solution is implemented using a rotational disk to control the vehicle heading and a common analogue joystick to control the vector speed of the center of the mass of the vehicle. The number of degrees of freedom reduces to three, i.e., two angles (vehicle heading and the orientation of the vector speed) and a scalar (the magnitude of the speed vector). This is possible using a kinematic model based on the vehicle

Modal Interfaces in Hawaii

NASA Technical Reports Server (NTRS)

Wright, E. Alvey

1974-01-01

Hawaii, an archipelago where transportation distances are short but the interfaces are many, seeks elimination of modal changes by totally-submerged hydrofoil craft operating at the water surface directly between tourist resort destinations, by dual mode rapid transit vehicles operating directly between the deplaning bridges at Honolulu International Airport and hotel porte-cochere at Waikiki, by demand responsive vehicles for collection and distribution operating on fixed guideways for line haul, and by roll-on/roll-off inter-island ferries for all models of manually operated ground vehicles. The paper also describes facilitation of unavoidable interfaces by innovative sub-systems.

IIHS side crash test ratings and occupant death risk in real-world crashes.

PubMed

Teoh, Eric R; Lund, Adrian K

2011-10-01

To evaluate how well the Insurance Institute for Highway Safety (IIHS) side crash test ratings predict real-world occupant death risk in side-impact crashes. The IIHS has been evaluating passenger vehicle side crashworthiness since 2003. In the IIHS side crash test, a vehicle is impacted perpendicularly on the driver's side by a moving deformable barrier simulating a typical sport utility vehicle (SUV) or pickup. Injury ratings are computed for the head/neck, torso, and pelvis/leg, and vehicles are rated based on their ability to protect occupants' heads and resist occupant compartment intrusion. Component ratings are combined into an overall rating of good, acceptable, marginal, or poor. A driver-only rating was recalculated by omitting rear passenger dummy data. Data were extracted from the Fatality Analysis Reporting System (FARS) and National Automotive Sampling System/General Estimates System (NASS/GES) for the years 2000-2009. Analyses were restricted to vehicles with driver side air bags with head and torso protection as standard features. The risk of driver death was computed as the number of drivers killed (FARS) divided by the number involved (NASS/GES) in left-side impacts and was modeled using logistic regression to control for the effects of driver age and gender and vehicle type and curb weight. Death rates per million registered vehicle years were computed for all outboard occupants and compared by overall rating. Based on the driver-only rating, drivers of vehicles rated good were 70 percent less likely to die when involved in left-side crashes than drivers of vehicles rated poor, after controlling for driver and vehicle factors. Compared with vehicles rated poor, driver death risk was 64 percent lower for vehicles rated acceptable and 49 percent lower for vehicles rated marginal. All 3 results were statistically significant. Among components, vehicle structure rating exhibited the strongest relationship with driver death risk. The vehicle

Speech-based E-mail and driver behavior: effects of an in-vehicle message system interface.

PubMed

Jamson, A Hamish; Westerman, Stephen J; Hockey, G Robert J; Carsten, Oliver M J

2004-01-01

As mobile office technology becomes more advanced, drivers have increased opportunity to process information "on the move." Although speech-based interfaces can minimize direct interference with driving, the cognitive demands associated with such systems may still cause distraction. We studied the effects on driving performance of an in-vehicle simulated "E-mail" message system; E-mails were either system controlled or driver controlled. A high-fidelity, fixed-base driving simulator was used to test 19 participants on a car-following task. Virtual traffic scenarios varying in driving demand. Drivers compensated for the secondary task by adopting longer headways but showed reduced anticipation of braking requirements and shorter time to collision. Drivers were also less reactive when processing E-mails, demonstrated by a reduction in steering wheel inputs. In most circumstances, there were advantages in providing drivers with control over when E-mails were opened. However, during periods without E-mail interaction in demanding traffic scenarios, drivers showed reduced braking anticipation. This may be a result of increased cognitive costs associated with the decision making process when using a driver-controlled interface when the task of scheduling E-mail acceptance is added to those of driving and E-mail response. Actual or potential applications of this research include the design of speech-based in-vehicle messaging systems.

Surveillance of traffic incident management-related occupational fatalities in Kentucky, 2005-2016.

PubMed

Bunn, T L; Slavova, S; Chandler, M; Hanner, N; Singleton, M

2018-05-19

Traffic incidents occurring on roadways require the coordinated effort of multiple responder and recovery entities, including communications, law enforcement, fire and rescue, emergency medical services, hazardous materials, transportation agencies, and towing and recovery. The objectives of this study were to (1) identify and characterize transportation incident management (TIM)-related occupational fatalities; (2) assess concordance of surveillance data sources in identifying TIM occupations, driver vs. pedestrian status, and occupational fatality incident location; and (3) determine and compare U.S. occupational fatality rates for TIM industries. The Kentucky Fatality Assessment and Control Evaluation (FACE) program analyzed 2005-2016 TIM occupational fatality data using multiple data sources: death certificate data, Collision Report Analysis for Safer Highways (CRASH) data, and media reports, among others. Literal text analysis was performed on FACE data, and a multiple linear regression model and SAS proc sgpanel were used to estimate and visualize the U.S. TIM occupational mortality trend lines and confidence bounds. There were 29 TIM fatalities from 2005 to 2015 in Kentucky; 41% of decedents were in the police protection occupation, and 21% each were in the fire protection and motor vehicle towing industries. Over one half of the TIM decedents were performing work activities as pedestrians when they died. Media reports identified the majority of the occupational fatalities as TIM related (28 of 29 TIM-related deaths); the use of death certificates as the sole surveillance data source only identified 17 of the 29 deaths as TIM related, and the use of CRASH data only identified 4 of the 29 deaths as TIM related. Injury scenario text analysis showed that law enforcement vehicle pursuit, towing and recovery vehicle loading, and disabled vehicle response were particular high-risk activities that led to TIM deaths. Using U.S. data, the motor vehicle towing

The Relationship between Vehicle Weight/Size and Safety

NASA Astrophysics Data System (ADS)

Wenzel, Tom; Ross, Marc

2008-09-01

Light-duty vehicles account for about 20% of US CO2 emissions. However, new vehicle fuel economy standards have not been significantly tightened since they were first enacted three decades ago. A historical impediment to imposing tougher fuel economy standards has been the long-standing perception that reducing the mass of a car or truck would make it more dangerous to its occupants in a crash. One often hears that this perception is dictated by "simple physics:" that, all else being equal, you are at greater risk in a lighter vehicle than in a heavier one. Our research on driver fatality risk has found that, when it comes to vehicle safety, all else is never equal. Vehicle mass is not the most important variable in determining occupant safety, not even in frontal crashes between two vehicles. You are at no greater risk driving an average car than you are driving a much heavier (and less fuel efficient) truck-based SUV. And larger and heavier truck-based SUVs and pickups impose enormous risks on car occupants. We summarize the most recent research on the interplay between vehicle weight, size and safety, and what the implications are for new state and federal standards to reduce vehicle CO2 emissions.

Interface of the transport systems research vehicle monochrome display system to the digital autonomous terminal access communication data bus

NASA Technical Reports Server (NTRS)

Easley, W. C.; Tanguy, J. S.

1986-01-01

An upgrade of the transport systems research vehicle (TSRV) experimental flight system retained the original monochrome display system. The original host computer was replaced with a Norden 11/70, a new digital autonomous terminal access communication (DATAC) data bus was installed for data transfer between display system and host, while a new data interface method was required. The new display data interface uses four split phase bipolar (SPBP) serial busses. The DATAC bus uses a shared interface ram (SIR) for intermediate storage of its data transfer. A display interface unit (DIU) was designed and configured to read from and write to the SIR to properly convert the data from parallel to SPBP serial and vice versa. It is found that separation of data for use by each SPBP bus and synchronization of data tranfer throughout the entire experimental flight system are major problems which require solution in DIU design. The techniques used to accomplish these new data interface requirements are described.

Vehicle occupants' exposure to aromatic volatile organic compounds while commuting on an urban-suburban route in Korea.

PubMed

Jo, W K; Choi, S J

1996-08-01

This study identified in-auto and in-bus exposures to six selected aromatic volatile organic compounds (VOCs) for commutes on an urban-suburban route in Korea. A bus-service route was selected to include three segments of Taegu and one suburban segment (Hayang) to satisfy the criteria specified for this study. This study indicates that motor vehicle exhaust and evaporative emissions are major sources of both auto and bus occupants' exposures to aromatic VOCs in both Taegu and Hayang. A nonparametric statistical test (Wilcoxon test) showed that in-auto benzene levels were significantly different from in-bus benzene levels for both urban-segment and suburban-segment commutes. The test also showed that the benzene-level difference between urban-segment and suburban-segment commutes was significant for both autos and buses. An F-test showed the same statistical results for the comparison of the summed in-vehicle concentration of the six target VOCs (benzene, toluene, ethylbenzene, and o,m,p-xylenes) as those for the comparison of the in-vehicle benzene concentration. On the other hand, the in-vehicle benzene level only and the sum were not significantly different among the three urban-segment commutes and between the morning and evening commutes. The in-auto VOC concentrations were intermediate between the results for the Los Angeles and Boston. The in-bus VOC concentrations were about one-tenth of the Taipei, Taiwan results.

The influence of occupant anthropometry and seat position on ejection risk in a rollover.

PubMed

Atkinson, Theresa; Fras, Andrew; Telehowski, Paul

2010-08-01

During rollover crashes, ejection increases an occupant's risk of severe to fatal injury as compared to risks for those retained in the vehicle. The current study examined whether occupant anthropometry might influence ejection risk. Factors such as restraint use/disuse, seating position, vehicle type, and roll direction were also considered in the analysis. The current study examined occupant ejections in 10 years of National Automotive Sampling System (NASS) single-event rollovers of passenger vehicles and light trucks. Statistical analysis of unweighted and weighted ejection data was carried out. No statistically significant differences in ejection rates were found based on occupant height, age, or body mass index. Drivers were ejected significantly more frequently than other occupants: 62 percent of unrestrained drivers were ejected vs. 51 percent unrestrained right front occupants. Second row unrestrained occupants were ejected at rates similar to right front-seated occupants. There were no significant differences in ejection rates for near- vs. far-side occupants. These data suggest that assessment of ejection prevention systems using either a 50th or 5th percentile adult anthropomorphic test dummy (ATD) might provide a reasonable measure of system function for a broad range of occupants. They also support the development of ejection mitigation technologies that extend beyond the first row to protect occupants in rear seat positions. Future studies should consider potential interaction effects (i.e., occupant size and vehicle dimensions) and the influence of occupant size on ejection risk in non-single-event rollovers.

Validation of a Simulation Process for Assessing the Response of a Vehicle and Its Occupants to an Explosive Threat

DTIC Science & Technology

2010-01-01

gross vehicle response; and the effects of blast mitigation material, restraint system, and seat design to the loads developed on the members of an...occupant. A Blast Event Simulation sysTem (BEST) has been developed for facilitating the easy use of the LS- DYNA solvers for conducting a...et al, 1999] for modeling blast events. In this paper the Eulerian solver of LS- DYNA is employed for simulating the soil – explosive – air

Illinois Occupational Skill Standards. Collision Repair Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for workforce preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the (vehicle) collision repair technician cluster. It begins with a brief overview of the Illinois perspective on occupational skill standards…

Research in biomechanics of occupant protection.

PubMed

King, A I; Yang, K H

1995-04-01

This paper discusses the biomechanical bases for occupant protection against frontal and side impact. Newton's Laws of Motion are used to illustrate the effect of a crash on restrained and unrestrained occupants, and the concept of ride down is discussed. Occupant protection through the use of energy absorbing materials is described, and the mechanism of injury of some of the more common injuries is explained. The role of the three-point belt and the airbag in frontal protection is discussed along with the potential injuries that can result from the use of these restraint systems. Side impact protection is more difficult to attain but some protection can be derived from the use of padding or a side impact airbag. It is concluded that the front seat occupants are adequately protected against frontal impact if belts are worn in an airbag equipped vehicle. Side impact protection may not be uniform in all vehicles.

Assessing the effectiveness of Montana's vehicle occupant protection program.

DOT National Transportation Integrated Search

2015-02-01

The purpose of this project was to quantitatively evaluate the relationships between MDT's occupant protection program : activities and seat restraint usage throughout Montana, in an effort to clarify how MDT's occupant protection programs may : affe...

Vehicle to Electric Vehicle Supply Equipment Smart Grid Communications Interface Research and Testing Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kevin Morrow; Dimitri Hochard; Jeff Wishart

2011-09-01

Plug-in electric vehicles (PEVs), including battery electric, plug-in hybrid electric, and extended range electric vehicles, are under evaluation by the U.S. Department of Energy's Advanced Vehicle Testing Activity (AVTA) and other various stakeholders to better understand their capability and potential petroleum reduction benefits. PEVs could allow users to significantly improve fuel economy over a standard hybrid electric vehicles, and in some cases, depending on daily driving requirements and vehicle design, PEVs may have the ability to eliminate petroleum consumption entirely for daily vehicle trips. The AVTA is working jointly with the Society of Automotive Engineers (SAE) to assist in themore » further development of standards necessary for the advancement of PEVs. This report analyzes different methods and available hardware for advanced communications between the electric vehicle supply equipment (EVSE) and the PEV; particularly Power Line Devices and their physical layer. Results of this study are not conclusive, but add to the collective knowledge base in this area to help define further testing that will be necessary for the development of the final recommended SAE communications standard. The Idaho National Laboratory and the Electric Transportation Applications conduct the AVTA for the United States Department of Energy's Vehicle Technologies Program.« less

Numerical simulations of the occupant head response in an infantry vehicle under blunt impact and blast loading conditions.

PubMed

Sevagan, Gopinath; Zhu, Feng; Jiang, Binhui; Yang, King H

2013-07-01

This article presents the results of a finite element simulation on the occupant head response in an infantry vehicle under two separated loading conditions: (1) blunt impact and (2) blast loading conditions. A Hybrid-III dummy body integrated with a previously validated human head model was used as the surrogate. The biomechanical response of the head was studied in terms of head acceleration due to the impact by a projectile on the vehicle and intracranial pressure caused by blast wave. A series of parametric studies were conducted on the numerical model to analyze the effect of some key parameters, such as seat configuration, impact velocity, and boundary conditions. The simulation results indicate that a properly designed seat and internal surface of the infantry vehicle can play a vital role in reducing the risk of head injury in the current scenarios. Comparison of the kinematic responses under the blunt impact and blast loading conditions reveals that under the current loading conditions, the acceleration pulse in the blast scenario has much higher peak values and frequency than blunt impact case, which may reflect different head response characteristics.

2006 motor vehicle occupant protection facts

DOT National Transportation Integrated Search

2008-08-01

The National Highway Traffic Safety Administration has produced this booklet to explain the need for legislation, enforcement, education, and public awareness campaigns about protecting children, youth, and young adults in motor vehicles. collectivel...

Does unbelted safety requirement affect protection for belted occupants?

PubMed

Hu, Jingwen; Klinich, Kathleen D; Manary, Miriam A; Flannagan, Carol A C; Narayanaswamy, Prabha; Reed, Matthew P; Andreen, Margaret; Neal, Mark; Lin, Chin-Hsu

2017-05-29

Federal regulations in the United States require vehicles to meet occupant performance requirements with unbelted test dummies. Removing the test requirements with unbelted occupants might encourage the deployment of seat belt interlocks and allow restraint optimization to focus on belted occupants. The objective of this study is to compare the performance of restraint systems optimized for belted-only occupants with those optimized for both belted and unbelted occupants using computer simulations and field crash data analyses. In this study, 2 validated finite element (FE) vehicle/occupant models (a midsize sedan and a midsize SUV) were selected. Restraint design optimizations under standardized crash conditions (U.S.-NCAP and FMVSS 208) with and without unbelted requirements were conducted using Hybrid III (HIII) small female and midsize male anthropomorphic test devices (ATDs) in both vehicles on both driver and right front passenger positions. A total of 10 to 12 design parameters were varied in each optimization using a combination of response surface method (RSM) and genetic algorithm. To evaluate the field performance of restraints optimized with and without unbelted requirements, 55 frontal crash conditions covering a greater variety of crash types than those in the standardized crashes were selected. A total of 1,760 FE simulations were conducted for the field performance evaluation. Frontal crashes in the NASS-CDS database from 2002 to 2012 were used to develop injury risk curves and to provide the baseline performance of current restraint system and estimate the injury risk change by removing the unbelted requirement. Unbelted requirements do not affect the optimal seat belt and airbag design parameters in 3 out of 4 vehicle/occupant position conditions, except for the SUV passenger side. Overall, compared to the optimal designs with unbelted requirements, optimal designs without unbelted requirements generated the same or lower total injury risks for

Fatal crashes of passenger vehicles before and after adding antilock braking systems.

PubMed

Farmer, C M; Lund, A K; Trempel, R E; Braver, E R

1997-11-01

Fatal crash rates of passenger cars and vans were compared for the last model year before four-wheel antilock brakes were introduced and the first model year for which antilock brakes were standard equipment. Vehicles selected for analysis had no other significant design changes between the model years being compared, and the model years with and without antilocks were no more than two years apart. The overall fatal crash rates were similar for the two model years. However, the vehicles with antilocks were significantly more likely to be involved in crashes fatal to their own occupants, particularly single-vehicle crashes. Conversely, antilock vehicles were less likely to be involved in crashes fatal to occupants of other vehicles or nonoccupants (pedestrians, bicyclists). Overall, antilock brakes appear to have had little effect on fatal crash involvement. Further study is needed to better understand why fatality risk has increased for occupants of antilock vehicles.

Occupant Motion Sensors : Methods of Detection and Analysis

DOT National Transportation Integrated Search

1971-07-01

A STUDY HAS BEEN MADE OF METHODS FOR MEASURING OCCUPANT MOTION WITHIN A VEHICLE DURING CRASH OR IMPACT CONDITIONS. THE PURPOSE OF THE MEASUREMENTS IS TO EVALUATE RESTRAINT SYSTEMS, USING ANTHROPOMETRIC DUMMY, ANIMAL, OR HUMAN OCCUPANTS. A LIST OF GEN...

Crash fatality and vehicle incompatibility in collisions between cars and light trucks or vans.

PubMed

Ossiander, Eric M; Koepsell, Thomas D; McKnight, Barbara

2014-12-01

In crashes between a car and a light truck or van (LTV), car occupants are more likely to be killed than LTV occupants. The extent this is due to the greater harm imposed by LTVs on cars or the greater protection they offer their own occupants is not known. We conducted a case-control study of collisions between two passenger vehicles in the USA during 1990-2008. Cases were all decedents in fatal crashes (N=157,684); one control was selected from each crash in a national probability sample of crashes (N=379,458). Adjusted for the type of vehicle they were riding in and other confounders, occupants of vehicles colliding with any type of LTVs (categorised as compact sport utility vehicles (SUV), full-size SUVs, minivans, full-size vans, compact pickups and full-size pickups) were at higher risk of death compared with occupants colliding with cars. Adjusted for the type of vehicle they crashed with and other confounders, occupants of LTVs in a collision with any vehicle were at lower risk of death compared with car occupants. Compared with a crash between two cars, the overall RR of death in a crash between any of the other 27 different combinations of vehicle types was 1.0 or greater, except for crashes between two full-size pickups, where the RR of death was 0.9. Although LTVs protect their own occupants better than cars do, LTVs are associated with an excess total risk of death in crashes with cars or other LTVs. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

75 FR 76185 - Federal Motor Vehicle Safety Standard, Rearview Mirrors; Federal Motor Vehicle Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... Simulation D. Comparative Regulatory Requirements i. Current FMVSS No. 111 ii. Relevant European Regulations... specifically-defined type of incident in which a non-occupant of a vehicle (most commonly, a pedestrian, but it...-speed vehicle or trailer, designed to carry 10 persons or less which is constructed either on a truck...

Atlanta I-85 HOV-to-HOT conversion : analysis of vehicle and person throughput.

DOT National Transportation Integrated Search

2013-10-01

This report summarizes the vehicle and person throughput analysis for the High Occupancy Vehicle to High Occupancy Toll Lane : conversion in Atlanta, GA, undertaken by the Georgia Institute of Technology research team. The team tracked changes in : o...

Display analysis with the optimal control model of the human operator. [pilot-vehicle display interface and information processing

NASA Technical Reports Server (NTRS)

Baron, S.; Levison, W. H.

1977-01-01

Application of the optimal control model of the human operator to problems in display analysis is discussed. Those aspects of the model pertaining to the operator-display interface and to operator information processing are reviewed and discussed. The techniques are then applied to the analysis of advanced display/control systems for a Terminal Configured Vehicle. Model results are compared with those obtained in a large, fixed-base simulation.

The effect of roof strength on reducing occupant injury in rollovers.

PubMed

Herbst, Brian; Forrest, Steve; Orton, Tia; Meyer, Steven E; Sances, Anthony; Kumaresan, Srirangam

2005-01-01

Roof crush occurs and potentially contributes to serious or fatal occupant injury in 26% of rollovers. It is likely that glazing retention is related to the degree of roof crush experienced in rollover accidents. Occupant ejection (including partial ejection) is the leading cause of death and injury in rollover accidents. In fatal passenger car accidents involving ejection, 34% were ejected through the side windows. Side window glass retention during a rollover is likely to significantly reduce occupant ejections. The inverted drop test methodology is a test procedure to evaluate the structural integrity of roofs under loadings similar to those seen in real world rollovers. Recent testing on many different vehicle types indicates that damage consistent with field rollover accidents can be achieved through inverted drop testing at very small drop heights. Drop test comparisons were performed on 16 pairs of vehicles representing a large spectrum of vehicle types. Each vehicle pair includes a production vehicle and a vehicle with a reinforced roof structure dropped under the same test conditions. This paper offers several examples of post-production reinforcements to roof structures that significantly increase the crush resistance of the roof as measured by inverted drop tests. These modifications were implemented with minimal impact on vehicle styling, interior space and visual clearances. The results of these modifications indicate that roof crush can be mitigated by nearly an order of magnitude, as roof crush was reduced by 44-91% with only a 1-2.3% increase in vehicle weight. Additionally, this paper analyzes the glazing breakage patterns in the moveable tempered side windows on the side adjacent to the vehicle impact point in the inverted drop tests. A comparison is made between the production vehicles and the reinforced vehicles in order to determine if the amount roof crush is related to glazing integrity in the side windows. Lastly, two drop test pairs

Evaluation of Vehicle-Based Crash Severity Metrics.

PubMed

Tsoi, Ada H; Gabler, Hampton C

2015-01-01

Vehicle change in velocity (delta-v) is a widely used crash severity metric used to estimate occupant injury risk. Despite its widespread use, delta-v has several limitations. Of most concern, delta-v is a vehicle-based metric which does not consider the crash pulse or the performance of occupant restraints, e.g. seatbelts and airbags. Such criticisms have prompted the search for alternative impact severity metrics based upon vehicle kinematics. The purpose of this study was to assess the ability of the occupant impact velocity (OIV), acceleration severity index (ASI), vehicle pulse index (VPI), and maximum delta-v (delta-v) to predict serious injury in real world crashes. The study was based on the analysis of event data recorders (EDRs) downloaded from the National Automotive Sampling System / Crashworthiness Data System (NASS-CDS) 2000-2013 cases. All vehicles in the sample were GM passenger cars and light trucks involved in a frontal collision. Rollover crashes were excluded. Vehicles were restricted to single-event crashes that caused an airbag deployment. All EDR data were checked for a successful, completed recording of the event and that the crash pulse was complete. The maximum abbreviated injury scale (MAIS) was used to describe occupant injury outcome. Drivers were categorized into either non-seriously injured group (MAIS2-) or seriously injured group (MAIS3+), based on the severity of any injuries to the thorax, abdomen, and spine. ASI and OIV were calculated according to the Manual for Assessing Safety Hardware. VPI was calculated according to ISO/TR 12353-3, with vehicle-specific parameters determined from U.S. New Car Assessment Program crash tests. Using binary logistic regression, the cumulative probability of injury risk was determined for each metric and assessed for statistical significance, goodness-of-fit, and prediction accuracy. The dataset included 102,744 vehicles. A Wald chi-square test showed each vehicle-based crash severity metric

Injury risk among children in motor vehicle crashes: older versus younger drivers.

PubMed

Bromfield, Samantha G; McGwin, Gerald

2014-11-01

To explore the relationship between injury risk among child occupants involved in motor vehicle collisions according to the age of the vehicle driver. The National Automotive Sampling System Crashworthiness Data System 2000-2009 (n = 10 797) was used to identify demographic, vehicle-, collision- and injury-related characteristics among motor vehicle collision occupants ≤15 years of age. The association between the age of the driver (older vs. younger, defined as individuals <50 years of age vs. individuals ≥50 years of age, respectively) and injury occurrence was estimated using logistic regression adjusting for the potentially confounding effect of occupant, vehicle and collision characteristics. Of the child occupants in motor vehicle collisions, 2.9% were driving with an older driver, and approximately 2.9% were injured while driving with a younger driver (odds ratio 1.03; 95% confidence interval 0.55-1.91). After adjusting for child occupant age, gender, restraint use, seat position and vehicle type, there remained no significant association between the age of the driver (older vs. younger) and the risk of injury (odds ratio 0.92; 95% confidence interval 0.49-1.74). These findings add to the body of literature indicating no difference in injury risk found among children when considering the age of the driver. Research is needed to ascertain the association and further evaluate characteristics more specific to the relationship being explored in this study. © 2014 The Authors. Journal of Paediatrics and Child Health © 2014 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

Injuries to Pregnant Occupants in Automotive Crashes

PubMed Central

Klinich, Kathleen DeSantis; Schneider, Lawrence W.; Moore, Jamie L.; Pearlman, Mark D.

1998-01-01

Injuries unique to pregnant occupants involved in motor-vehicle crashes include placental abruption, uterine rupture or laceration, and direct fetal injury. The mechanisms and characteristics of these injuries are discussed using examples from a literature review and from recent investigations of crashes involving pregnant occupants. In addition, a review of the relationship between the pregnant driver and automotive restraints and the steering wheel illustrates how injury potential may differ from the non-pregnant occupant.

Design of a Lunar Quick-Attach Mechanism to Hummer Vehicle Mounting Interface

NASA Technical Reports Server (NTRS)

Grismore, David A.

2010-01-01

This report presents my work experiences while I was an intern with NASA (National Aeronautic and Space Administration) in the Spring of2010 at the Kennedy Space Center (KSC) launch facility in Cape Canaveral, Florida as a member of the NASA USRP (Undergraduate Student Research Program) program. I worked in the Surface Systems (NE-S) group during the internship. Within NE-S, two ASRC (Arctic Slope Regional Corporation) contract engineers, A.J. Nick and Jason Schuler, had developed a "Quick-Attach" mechanism for the Chariot Rover, the next generation lunar rover. My project was to design, analyze, and possibly fabricate a mounting interface between their "Quick-Attach" and a Hummer vehicle. This interface was needed because it would increase their capabilities to test the Quick Attach and its various attachments, as they do not have access to a Chariot Rover at KSC. I utilized both Pro Engineer, a 3D CAD software package, and a Coordinate Measuring Machine (CMM) known as a FAROarm to collect data and create my design. I relied on hand calculations and the Mechanica analysis tool within Pro Engineer to perform stress analysis on the design. After finishing the design, I began working on creating professional level CAD drawings and issuing them into the KSC design database known as DDMS before the end of the internship.

Rat Model of Brain Injury to Occupants of Vehicles Targeted by Land Mines: Mitigation by Elastomeric Frame Designs.

PubMed

Tchantchou, Flaubert; Puche, Adam A; Leiste, Ulrich; Fourney, William; Blanpied, Thomas A; Fiskum, Gary

2018-05-15

Many victims of blast traumatic brain injury (TBI) are occupants of vehicles targeted by land mines. A rat model of under-vehicle blast TBI was used to test the hypothesis that the ensuing neuropathology and altered behavior are mitigated by vehicle frame designs that dramatically reduce blast-induced acceleration (G force). Male rats were restrained on an aluminum platform that was accelerated vertically at up to 2850g, in response to detonation of an explosive positioned under a second platform in contact with the top via different structures. The presence of elastomeric, polyurea-coated aluminum cylinders between the platforms reduced acceleration by 80% to 550g compared with 2350g with uncoated cylinders. Moreover, 67% of rats exposed to 2850g, and 20% of those exposed to 2350g died immediately after blast, whereas all rats subjected to 550g blast survived. Assays for working memory (Y maze) and anxiety (Plus maze) were conducted for up to 28 days. Rats were euthanized at 24 h or 29 days, and their brains were used for histopathology and neurochemical measurements. Rats exposed to 2350g blasts exhibited increased cleaved caspase-3 immunoreactive neurons in the hippocampus. There was also increased vascular immunoglobulin (Ig)G effusion and F4/80 immunopositive macrophages/microglia. Blast exposure reduced hippocampal levels of synaptic proteins Bassoon and Homer-1, which were associated with impaired performance in the Y maze and the Plus maze tests. These changes observed after 2350g blasts were reduced or eliminated with the use of polyurea-coated cylinders. Such advances in vehicle designs should aid in the development of the next generation of blast-resistant vehicles.

Occupant injury protection in automobile collisions.

PubMed

Peters, G A; Peters, B J

1999-12-01

Modern technology has produced automotive vehicles that have become both a luxury and a necessity in modern civilization. They have become highly useful, even more varied in form and function, and capable of high speeds on crowded roadways. One unfortunate consequence is the high frequency of accidents and the greater severity of injuries when collisions do occur. In response, modern technology has produced a variety of safety and health features, devices and designs intended for better occupant protection on in high speed vehicles. Injury reduction has become a prime design objective, but there are residual risks, which, as technology evolves, require effective communication to those risk. There can be little risk avoidance behavior without awareness of the hazards and effective communication to the vehicle occupant, as to what could and should be done for self-protection. For example, one out of three drivers apparently fails to understand the function of head restraints, few understand the 'safe zone' posture required for air bags and many believe safety features should be adjusted only for comfort. Some of the current residual injury producing problems in occupant systems are specifically described here in order to illustrate what is needed in terms of both design remedies and health promotion activities.

The Injury Risk to Wheelchair Occupants Using Motor Vehicle Transportation

PubMed Central

Songer, Thomas J.; Fitzgerald, Shirley G.; Rotko, Katherine A.

2004-01-01

The transportation safety experience for persons using wheelchairs is largely unknown. Motor vehicle crash involvement and injury frequency was examined in a telephone interview completed by 596 wheelchair users. Overall, 42% were drivers. Most subjects also rode as passengers in private vehicles (87%) and public vehicles (61%). Wheelchair use as a seat in the vehicle was higher among passengers than drivers. Crash involvement was highest among drivers and lower in passengers. Reported injuries from non-crash scenarios, though, were higher in passengers compared to drivers. Persons seated in wheelchairs in vehicles appear to be at a greater safety risk. PMID:15319121

Inter-Module Ventilation Changes to the International Space Station Vehicle to Support Integration of the International Docking Adapter and Commercial Crew Vehicles

NASA Technical Reports Server (NTRS)

Link, Dwight E., Jr.; Balistreri, Steven F., Jr.

2015-01-01

The International Space Station (ISS) Environmental Control and Life Support System (ECLSS) is continuing to evolve in the post-Space Shuttle era. The ISS vehicle configuration that is in operation was designed for docking of a Space Shuttle vehicle, and designs currently under development for commercial crew vehicles require different interfaces. The ECLSS Temperature and Humidity Control Subsystem (THC) Inter-Module Ventilation (IMV) must be modified in order to support two docking interfaces at the forward end of ISS, to provide the required air exchange. Development of a new higher-speed IMV fan and extensive ducting modifications are underway to support the new Commercial Crew Vehicle interfaces. This paper will review the new ECLSS IMV development requirements, component design and hardware status, subsystem analysis and testing performed to date, and implementation plan to support Commercial Crew Vehicle docking.

Aortic injuries in newer vehicles.

PubMed

Ryb, Gabriel E; Dischinger, Patricia C; Kleinberger, Michael; McGwin, Gerald; Griffin, Russell L

2013-10-01

The occurrence of AI was studied in relation to vehicle model year (MY) among front seat vehicular occupants, age≥16 in vehicles MY≥1994, entered in the National Automotive Sampling System Crashworthiness Data System between 1997 and 2010 to determine whether newer vehicles, due to their crashworthiness improvements, are linked to a lower risk of aortic injuries (AI). MY was categorized as 1994-1997, 1998-2004, or 2005-2010 reflecting the introduction of newer occupant protection technology. Logistic regression was used to calculate odds ratios (OR) and 95% confidence intervals for the association between AI and MY independent of possible confounders. Analysis was repeated, stratified by frontal and near lateral impacts. AI occurred in 19,187 (0.06%) of the 31,221,007 (weighted) cases, and contributed to 11% of all deaths. AIs were associated with advanced age, male gender, high BMI, near-side impact, rollover, ejection, collision against a fixed object, high ΔV, vehicle mismatch, unrestrained status, and forward track position. Among frontal crashes, MY 98-04 and MY 05-10 showed increased adjusted odds of AI when compared to MY 94-97 [OR 1.84 (1.02-3.32) and 1.99 (0.93-4.26), respectively]. In contrast, among near-side impact crashes, MY 98-04 and MY 05-10 showed decreased adjusted odds of AI [OR 0.50 (0.25-0.99) and 0.27 (0.06-1.31), respectively]. While occupants of newer vehicles experience lower odds of AI in near side impact crashes, a higher AI risk is present in frontal crashes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Predicting severe injury using vehicle telemetry data.

PubMed

Ayoung-Chee, Patricia; Mack, Christopher D; Kaufman, Robert; Bulger, Eileen

2013-01-01

In 2010, the National Highway Traffic Safety Administration standardized collision data collected by event data recorders, which may help determine appropriate emergency medical service (EMS) response. Previous models (e.g., General Motors ) predict severe injury (Injury Severity Score [ISS] > 15) using occupant demographics and collision data. Occupant information is not automatically available, and 12% of calls from advanced automatic collision notification providers are unanswered. To better inform EMS triage, our goal was to create a predictive model only using vehicle collision data. Using the National Automotive Sampling System Crashworthiness Data System data set, we included front-seat occupants in late-model vehicles (2000 and later) in nonrollover and rollover crashes in years 2000 to 2010. Telematic (change in velocity, direction of force, seat belt use, vehicle type and curb weight, as well as multiple impact) and nontelematic variables (maximum intrusion, narrow impact, and passenger ejection) were included. Missing data were multiply imputed. The University of Washington model was tested to predict severe injury before application of guidelines (Step 0) and for occupants who did not meet Steps 1 and 2 criteria (Step 3) of the Centers for Disease Control and Prevention Field Triage Guidelines. A probability threshold of 20% was chosen in accordance with Centers for Disease Control and Prevention recommendations. There were 28,633 crashes, involving 33,956 vehicles and 52,033 occupants, of whom 9.9% had severe injury. At Step 0, the University of Washington model sensitivity was 40.0% and positive predictive value (PPV) was 20.7%. At Step 3, the sensitivity was 32.3 % and PPV was 10.1%. Model analysis excluding nontelematic variables decreased sensitivity and PPV. The sensitivity of the re-created General Motors model was 38.5% at Step 0 and 28.1% at Step 3. We designed a model using only vehicle collision data that was predictive of severe injury at

Lower extremity injury criteria for evaluating military vehicle occupant injury in underbelly blast events.

PubMed

McKay, Brian J; Bir, Cynthia A

2009-11-01

Anti-vehicular (AV) landmines and improvised explosive devices (IED) have accounted for more than half of the United States military hostile casualties and wounded in Operation Iraqi Freedom (OIF) (Department of Defense Personnel & Procurement Statistics, 2009). The lower extremity is the predominantly injured body region following an AV mine or IED blast accounting for 26 percent of all combat injuries in OIF (Owens et al., 2007). Detonations occurring under the vehicle transmit high amplitude and short duration axial loads onto the foot-ankle-tibia region of the occupant causing injuries to the lower leg. The current effort was initiated to develop lower extremity injury criteria for occupants involved in underbelly blast impacts. Eighteen lower extremity post mortem human specimens (PMHS) were instrumented with an implantable load cell and strain gages and impacted at one of three incrementally severe AV axial loading conditions. Twelve of the 18 PMHS specimens sustained fractures of the calcaneus, talus, fibula and/or tibia. The initiation of skeletal injury was precisely detected by strain gages and corresponded with local peak axial tibia force. Survival analysis identified peak axial tibia force and impactor velocity as the two best predictors of incapacitating injury. A tibia axial force of 5,931 N and impactor velocity of 10.8 m/s corresponds with a 50 percent risk of an incapacitating injury. The criteria may be utilized to predict the probability of lower extremity incapacitating injury in underbelly blast impacts.

Experiments in teleoperator and autonomous control of space robotic vehicles

NASA Technical Reports Server (NTRS)

Alexander, Harold L.

1991-01-01

A program of research embracing teleoperator and automatic navigational control of freely flying satellite robots is presented. Current research goals include: (1) developing visual operator interfaces for improved vehicle teleoperation; (2) determining the effects of different visual interface system designs on operator performance; and (3) achieving autonomous vision-based vehicle navigation and control. This research program combines virtual-environment teleoperation studies and neutral-buoyancy experiments using a space-robot simulator vehicle currently under development. Visual-interface design options under investigation include monoscopic versus stereoscopic displays and cameras, helmet-mounted versus panel-mounted display monitors, head-tracking versus fixed or manually steerable remote cameras, and the provision of vehicle-fixed visual cues, or markers, in the remote scene for improved sensing of vehicle position, orientation, and motion.

Electric Vehicle Careers: On the Road to Change

ERIC Educational Resources Information Center

Hamilton, James

2012-01-01

Many occupations related to electric vehicles are similar to those that help to make and maintain all types of automobiles. But the industry is also adding some nontraditional jobs, and workers' skill sets must evolve to keep up. This article describes careers related to electric vehicles. The first section is about the electric vehicle industry…

NASA Docking System (NDS) Interface Definitions Document (IDD). Revision C, Nov. 2010

NASA Technical Reports Server (NTRS)

2010-01-01

The NASA Docking System (NDS) mating system supports low approach velocity docking and provides a modular and reconfigurable standard interface, supporting crewed and autonomous vehicles during mating and assembly operations. The NDS is NASA's implementation for the emerging International Docking System Standard (IDSS) using low impact docking technology. All NDS configurations can mate with the configuration specified in the IDSS Interface Definition Document (IDD) released September 21, 2010. The NDS evolved from the Low Impact Docking System (LIDS). The acronym international Low Impact Docking System (iLIDS) is also used to describe this system. NDS and iLIDS may be used interchangeability. Some of the heritage documentation and implementations (e.g., software command names) used on NDS will continue to use the LIDS acronym. The NDS IDD defines the interface characteristics and performance capability of the NDS, including uses ranging from crewed to autonomous space vehicles and from low earth orbit to deep space exploration. The responsibility for developing space vehicles and for making them technically and operationally compatible with the NDS rests with the vehicle providers. Host vehicle examples include crewed/uncrewed spacecraft, space station modules, elements, etc. Within this document, any docking space vehicle will be referred to as the host vehicle. This document defines the NDS-to-NDS interfaces, as well as the NDS-to-host vehicle interfaces and performance capability.

In-vehicle nitrogen dioxide concentrations in road tunnels

NASA Astrophysics Data System (ADS)

Martin, Ashley N.; Boulter, Paul G.; Roddis, Damon; McDonough, Liza; Patterson, Michael; Rodriguez del Barco, Marina; Mattes, Andrew; Knibbs, Luke D.

2016-11-01

There is a lack of knowledge regarding in-vehicle concentrations of nitrogen dioxide (NO2) during transit through road tunnels in urban environments. Furthermore, previous studies have tended to involve a single vehicle and the range of in-vehicle NO2 concentrations that vehicle occupants may be exposed to is not well defined. This study describes simultaneous measurements of in-vehicle and outside-vehicle NO2 concentrations on a route through Sydney, Australia that included several major tunnels, minor tunnels and busy surface roads. Tests were conducted on nine passenger vehicles to assess how vehicle characteristics and ventilation settings affected in-vehicle NO2 concentrations and the in-vehicle-to-outside vehicle (I/O) concentration ratio. NO2 was measured directly using a cavity attenuated phase shift (CAPS) technique that gave a high temporal and spatial resolution. In the major tunnels, transit-average in-vehicle NO2 concentrations were lower than outside-vehicle concentrations for all vehicles with cabin air recirculation either on or off. However, markedly lower I/O ratios were obtained with recirculation on (0.08-0.36), suggesting that vehicle occupants can significantly lower their exposure to NO2 in tunnels by switching recirculation on. The highest mean I/O ratios for NO2 were measured in older vehicles (0.35-0.36), which is attributed to older vehicles having higher air exchange rates. The results from this study can be used to inform the design and operation of future road tunnels and modelling of personal exposure to NO2.

Associations between damage location and five main body region injuries of MAIS 3-6 injured occupants.

PubMed

Tang, Youming; Cao, Libo; Kan, Steven

2014-05-08

To examine the damage location distribution of five main body region injuries of maximum abbreviated injury score (MAIS) 3-6 injured occupants for nearside struck vehicle in front-to-side impact crashes. MAIS 3-6 injured occupants information was extracted from the US-National Automotive Sampling System/Crashworthiness Data System in the year 2007; it included the head/face/neck, chest, pelvis, upper extremity and lower extremity. Struck vehicle collision damage was classified in a three-dimensional system according to the J224 Collision Deformation Classification of SAE Surface Vehicle Standard. Nearside occupants seated directly adjacent to the struck side of the vehicle with MAIS 3-6 injured, in light truck vehicles-passenger cars (LTV-PC) side impact crashes. Distribution of MAIS 3-6 injured occupants by body regions and specific location of damage (lateral direction, horizontal direction and vertical direction) were examined. Injury risk ratio was also assessed. The lateral crush zone contributed to MAIS 3-6 injured occupants (n=705) and 50th centile injury risks when extended into zone 3. When the crush extended to zone 4, the injury risk ratio of MAIS 3-6 injured occupants approached 81%. The horizontal crush zones contributing to the highest injury risk ratio of MAIS 3-6 occupants were zones 'D' and 'Y', and the injury risk ratios were 25.4% and 36.9%, respectively. In contrast, the lowest injury risk ratio was 5.67% caused by zone 'B'. The vertical crush zone which contributed to the highest injury risk ratio of MAIS 3-6 occupants was zone 'E', whose injury risk ratio was 58%. In contrast, the lowest injury risk ratio was 0.14% caused by zone 'G+M'. The highest injury risk ratio of MAIS 3-6 injured occupants caused by crush intrusion between 40 and 60 cm in LTV-PC nearside impact collisions and the damage region of the struck vehicle was in the zones 'E' and 'Y'.

ITOS to EDGE "Bridge" Software for Morpheus Lunar/Martian Vehicle

NASA Technical Reports Server (NTRS)

Hirsh, Robert; Fuchs, Jordan

2012-01-01

My project Involved Improving upon existing software and writing new software for the Project Morpheus Team. Specifically, I created and updated Integrated Test and Operations Systems (ITOS) user Interfaces for on-board Interaction with the vehicle during archive playback as well as live streaming data. These Interfaces are an integral part of the testing and operations for the Morpheus vehicle providing any and all information from the vehicle to evaluate instruments and insure coherence and control of the vehicle during Morpheus missions. I also created a "bridge" program for Interfacing "live" telemetry data with the Engineering DOUG Graphics Engine (EDGE) software for a graphical (standalone or VR dome) view of live Morpheus nights or archive replays, providing graphical representation of vehicle night and movement during subsequent tests and in real missions.

Does obesity affect the position of seat belt loading in occupants involved in real-world motor vehicle collisions?

PubMed

Hartka, Thomas R; Carr, Hannah M; Smith, Brittany R; Melmer, Monica; Sochor, Mark R

2018-02-28

Previous work has shown that the lap belt moves superior and forward compared to the bony pelvis as body mass index (BMI) increases. The goal of this project was to determine whether the location of lap belt loading is related to BMI for occupants who sustained real-world motor vehicle collisions (MVCs). A national MVC database was queried for vehicle occupants over a 10-year period (2003-2012) who were at least 16 years old, restrained by a 3-point seat belt, sitting in the front row, and involved in a front-end collision with a change in velocity of at least 56 km/h. Cases were excluded if there was not an available computed tomography (CT) scan of the abdomen. CT scans were then analyzed using adipose enhancement of 3-dimensional reconstructions. Scans were assessed for the presence a radiographic seat belt sign (rSBS), or subcutaneous fat stranding due to seat belt loading. In scans in which the rSBS was present, anterior and superior displacement of rSBS from the anterior-superior iliac spine (ASIS) was measured bilaterally. This displacement was correlated with BMI and injury severity. The inclusion and exclusion criteria yielded 151 cases for analysis. An rSBS could definitively be identified in 55 cases. Cases in which occupants were older and had higher BMI were more likely to display an rSBS. There was a correlation between increasing BMI and anterior rSBS displacement (P <.01 and P <.01, right and left, respectively). There was no significant correlation between BMI and superior displacement of the rSBS (P =.46 and P =.33, right and left, respectively). When the data were examined in terms of relating increasing superior displacement of the lap belt with Injury Severity Scale (P =.34) and maximum Abbreviated Injury Score (AIS) injury severity (P =.63), there was also no significant correlation. The results from this study demonstrated that anterior displacement of the radiographic seat belt sign but not superior displacement increased with higher BMI

Fatal occupational injuries.

PubMed

Baker, S P; Samkoff, J S; Fisher, R S; Van Buren, C B

1982-08-13

Deaths resulting from work-related injuries during a one-year period in Maryland were identified and reviewed. Of 148 workers killed, all but two were male. Transportation vehicles were involved in 41% of the deaths, with road vehicles accounting for 25% of the total. Other major groups involved nonroad land vehicles (16%) and firearms, primarily handguns (11%). Two thirds of the workers died at the scene or were dead on arrival at the hospital. Head injuries were the most common cause of death. Eleven percent of the workers tested had blood alcohol concentrations of 0.08% by weight or greater. The majority of the deaths involved either hazards that are not addressed by the Occupational Safety and Health Act of 1970 or workers in categories that are excluded by law from regulation under this act.

Vehicle capture system

NASA Astrophysics Data System (ADS)

Tacke, Kenneth L.

1998-12-01

Primex Aerospace Company, under contract with the U.S. Army Armament Research Development & Engineering Center (ARDEC), has developed a portable vehicle capture system for use at vehicle checkpoints. Currently when a vehicle does not stop at a checkpoint, there are three possible reactions: let the vehicle go unchallenged, pursue the vehicle or stop the vehicle with lethal force. This system provides a non-lethal alternative that will stop and contain the vehicle. The system is completely portable with the heaviest component weighing less than 120 pounds. It can be installed with no external electrical power or permanent anchors required. In its standby mode, the system does not impede normal traffic, but on command erects a barrier in less than 1.5 seconds. System tests have been conducted using 5,100 and 8.400 pound vehicles, traveling at speeds up to 45 mph. The system is designed to minimize vehicle damage and occupant injury, typically resulting in deceleration forces of less than 2.5 gs on the vehicle. According to the drivers involved in tests at 45 mph, the stopping forces feel similar to a panic stop with the vehicle brakes locked. The system is completely reusable and be rapidly reset.

Blast resistant vehicle seat

DOEpatents

Ripley, Edward B

2013-02-12

Disclosed are various seats for vehicles particularly military vehicles that are susceptible to attack by road-bed explosive devices such as land mines or improvised explosive devices. The seats often have rigid seat shells and may include rigid bracing for rigidly securing the seat to the chassis of the vehicle. Typically embodiments include channels and particulate media such as sand disposed in the channels. A gas distribution system is generally employed to pump a gas through the channels and in some embodiments the gas is provided at a pressure sufficient to fluidize the particulate media when an occupant is sitting on the seat.

Crash Warning Interface Metrics: Final Report

DOT National Transportation Integrated Search

2011-08-01

The Crash Warning Interface Metrics (CWIM) project addressed issues of the driver-vehicle interface (DVI) for Advanced Crash Warning Systems (ACWS). The focus was on identifying the effects of certain warning system features (e.g., warning modality) ...

Display integration for ground combat vehicles

NASA Astrophysics Data System (ADS)

Busse, David J.

1998-09-01

The United States Army's requirement to employ high resolution target acquisition sensors and information warfare to increase its dominance over enemy forces has led to the need to integrate advanced display devices into ground combat vehicle crew stations. The Army's force structure require the integration of advanced displays on both existing and emerging ground combat vehicle systems. The fielding of second generation target acquisition sensors, color digital terrain maps and high volume digital command and control information networks on these platforms define display performance requirements. The greatest challenge facing the system integrator is the development and integration of advanced displays that meet operational, vehicle and human computer interface performance requirements for the ground combat vehicle fleet. The subject of this paper is to address those challenges: operational and vehicle performance, non-soldier centric crew station configurations, display performance limitations related to human computer interfaces and vehicle physical environments, display technology limitations and the Department of Defense (DOD) acquisition reform initiatives. How the ground combat vehicle Program Manager and system integrator are addressing these challenges are discussed through the integration of displays on fielded, current and future close combat vehicle applications.

A review of serious injuries and deaths among car occupants after motor vehicle crashes in Sweden from 1987 to 1994.

PubMed

Boström, L; Wladis, A; Nilsson, B

2001-01-01

Car occupants injured in motor vehicle crashes (MVC) are a common problem in emergency departments. The aims of this study were to determine the incidence over time, according to the type of injury, age and sex distribution, mortality rate and geographical differences among all patients admitted to Swedish hospitals because of MVC injuries. Between 1987 and 1994, Swedish hospitals admitted 37,871 persons (51,348 admissions) who had been involved in MVC as drivers or passengers. There were 23,369 men and 14,502 women. The annual frequency of hospital admissions ranged from 5,943 to 7,175. There were 74.8 injured persons admitted per 100,000 of the population each year. Males between 16 and 24 years of age were more commonly involved. Injuries to the head and neck were particularly frequent (39%). Older persons, males, and passengers had a poor survival outcome. The incidence of injured car occupants was significantly higher in sparsly populated areas of Sweden.

49 CFR 176.93 - Vehicles having refrigerating or heating equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... combustion motors which expose the occupants of the passenger vehicles to excessive concentrations of exhaust... 49 Transportation 2 2011-10-01 2011-10-01 false Vehicles having refrigerating or heating equipment... CARRIAGE BY VESSEL Special Requirements for Transport Vehicles Loaded With Hazardous Materials and...

49 CFR 176.93 - Vehicles having refrigerating or heating equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... combustion motors which expose the occupants of the passenger vehicles to excessive concentrations of exhaust... 49 Transportation 2 2010-10-01 2010-10-01 false Vehicles having refrigerating or heating equipment... CARRIAGE BY VESSEL Special Requirements for Transport Vehicles Loaded With Hazardous Materials and...

Effects of changing HOV lane occupancy requirements : El Monte busway case study

DOT National Transportation Integrated Search

2002-06-01

In 1999, the California Legislature passed Senate Bill 63, which lowered the vehicle-occupancy requirement on the El Monte Busway on the San Bernardino (I-10) Freeway from three persons per vehicle (3+) to two persons per vehicle (2+) full time. The ...

Study of current and planned high occupancy vehicle lane use: performance and prospects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Southworth, F.; Westbrook, F.

1985-12-01

This report details the results of a nationwide study of HOV lanes: their characteristics and performance as traffic congestion mitigating and rideshare enhancing facilities. The study took the form of telephone interviews with a variety of planning agencies in each of the 48 contiguous states and Hawaii over the period April through June 1985, with subsequent receipt of the most current documentation on regional HOV lane operations. The most up-to-date evidence on each lane's performance is presented: its hourly and peak period person throughput vis-a-vis the highway's adjacent, conventional mixed traffic lane(s), its vehicle throughput and occupancy, travel speed andmore » travel time savings for HOVs, lane rule violation rates, lane construction and maintenance costs and accident data. Estimates are provided of the growth in ridesharing over the life of the HOV-only lanes, of the number of vehicles removed from the highway through ridesharing, and of the subsequent fuel savings attributable to HOV lane projects. The relationship between bus patronage and carpool/vanpool mode adoption is looked at, and it is concluded that both forms of HOV can do well on properly planned lanes. The authors also point out the very partial nature of the existing evidence upon which to base HOV lane project evaluation, and the subsequent difficulty associated with ''selling'' the HOV lane concept to many planners and members of the public. They identify those characteristics associated with clearly successful HOV lane projects. Finally, the current state of planning for new HOV lanes in cities around the nation is described, and the major reasons given for rejection or abandonment of HOV lane projects are discussed.« less

Upgraded demonstration vehicle task report

NASA Technical Reports Server (NTRS)

Bryant, J.; Hardy, K.; Livingston, R.; Sandberg, J.

1981-01-01

Vehicle/battery performance capabilities and interface problems that occurred when upgraded developmental batteries were integrated with upgraded versions of comercially available electric vehicles were investigated. Developmental batteries used included nickel zinc batteries, a nickel iron battery, and an improved lead acid battery. Testing of the electric vehicles and upgraded batteries was performed in the complete vehicle system environment to characterize performance and identify problems unique to the vehicle/battery system. Constant speed tests and driving schedule range tests were performed on a chassis dynamometer. The results from these tests of the upgraded batteries and vehicles were compared to performance capabilities for the same vehicles equipped with standard batteries.

Evaluation of kinematics and injuries to restrained occupants in far-side crashes using full-scale vehicle and human body models.

PubMed

Arun, Mike W J; Umale, Sagar; Humm, John R; Yoganandan, Narayan; Hadagali, Prasanaah; Pintar, Frank A

2016-09-01

The objective of the current study was to perform a parametric study with different impact objects, impact locations, and impact speeds by analyzing occupant kinematics and injury estimations using a whole-vehicle and whole-body finite element-human body model (FE-HBM). To confirm the HBM responses, the biofidelity of the model was validated using data from postmortem human surrogate (PMHS) sled tests. The biofidelity of the model was validated using data from sled experiments and correlational analysis (CORA). Full-scale simulations were performed using a restrained Global Human Body Model Consortium (GHBMC) model seated on a 2001 Ford Taurus model using a far-side lateral impact condition. The driver seat was placed in the center position to represent a nominal initial impact condition. A 3-point seat belt with pretensioner and retractor was used to restrain the GHBMC model. A parametric study was performed using 12 simulations by varying impact locations, impacting object, and impact speed using the full-scale models. In all 12 simulations, the principal direction of force (PDOF) was selected as 90°. The impacting objects were a 10-in.-diameter rigid vertical pole and a movable deformable barrier. The impact location of the pole was at the C-pillar in the first case, at the B-pillar in the second case, and, finally, at the A-pillar in the third case. The vehicle and the GHBMC models were defined an initial velocity of 35 km/h (high speed) and 15 km/h (low speed). Excursion of the head center of gravity (CG), T6, and pelvis were measured from the simulations. In addition, injury risk estimations were performed on head, rib cage, lungs, kidneys, liver, spleen, and pelvis. The average CORA rating was 0.7. The shoulder belt slipped in B- and C-pillar impacts but somewhat engaged in the A-pillar case. In the B-pillar case, the head contacted the intruding struck-side structures, indicating higher risk of injury. Occupant kinematics depended on interaction with

Mobility Systems For Robotic Vehicles

NASA Astrophysics Data System (ADS)

Chun, Wendell

1987-02-01

The majority of existing robotic systems can be decomposed into five distinct subsystems: locomotion, control/man-machine interface (MMI), sensors, power source, and manipulator. When designing robotic vehicles, there are two main requirements: first, to design for the environment and second, for the task. The environment can be correlated with known missions. This can be seen by analyzing existing mobile robots. Ground mobile systems are generally wheeled, tracked, or legged. More recently, underwater vehicles have gained greater attention. For example, Jason Jr. made history by surveying the sunken luxury liner, the Titanic. The next big surge of robotic vehicles will be in space. This will evolve as a result of NASA's commitment to the Space Station. The foreseeable robots will interface with current systems as well as standalone, free-flying systems. A space robotic vehicle is similar to its underwater counterpart with very few differences. Their commonality includes missions and degrees-of-freedom. The issues of stability and communication are inherent in both systems and environment.

The effects of airbags and seatbelts on occupant injury in longitudinal barrier crashes.

PubMed

Gabauer, Douglas J; Gabler, Hampton C

2010-02-01

Longitudinal barriers, such as guardrails, are designed to prevent a vehicle that leaves the roadway from impacting a more dangerous object while minimizing the risk of injury to the vehicle occupants. Current full-scale test procedures for these devices do not consider the effect of occupant restraints such as seatbelts and airbags. The purpose of this study was to determine the extent to which restraints are used or deployed in longitudinal barrier collisions and their subsequent effect on occupant injury. Binary logistic regression models were generated to predict occupant injury risk using data from the National Automotive Sampling System / Crashworthiness Data System from 1997 through 2007. In tow-away longitudinal barrier crashes, airbag deployment rates were 70% for airbag-equipped vehicles. Compared with unbelted occupants without an airbag available, seat belt restrained occupants with an airbag available had a dramatically decreased risk of receiving a serious (MAIS 3+) injury (odds-ratio (OR)=0.03; 95% CI: 0.004-0.24). A similar decrease was observed among those restrained by seat belts, but without an airbag available (OR=0.03; 95% CI: 0.001- 0.79). No significant differences in risk of serious injuries were observed between unbelted occupants with an airbag available compared with unbelted occupants without an airbag available (OR=0.53; 95% CI=0.10-2.68). This study refutes the perception in the roadside safety community that airbags rarely deploy in frontal barrier crashes, and suggests that current longitudinal barrier occupant risk criteria may over-estimate injury potential for restrained occupants involved in a longitudinal barrier crash. Copyright 2010 Elsevier Ltd. All rights reserved.

Fatal occupational injuries of women, Texas 1975-84.

PubMed Central

Davis, H; Honchar, P A; Suarez, L

1987-01-01

A review of Texas death certificates for 1975-84 identified 348 cases of fatal occupational injuries of civilian females. Homicides accounted for 53 per cent and motor vehicle-related injuries accounted for 26 per cent of the deaths. Injuries from firearms caused 70 per cent of the homicides. One hundred thirty-three deaths occurred to women employed in the retail trade industry; of these, 77 per cent resulted from homicide. Women workers in gasoline service stations, food-bakery-and-dairy stores, and eating-and-drinking places had especially high risks of homicide. Texas female heavy-truck drivers had the highest fatal-injury rate, with motor-vehicle-related injuries causing 89 per cent of their deaths. These results indicate that effective strategies to prevent fatal occupational injuries of Texas women will need to address the problems of workplace violence and the hazards posed by motor vehicles. PMID:3674251

Disability risk in pediatric motor vehicle crash occupants.

PubMed

Doud, Andrea N; Schoell, Samantha L; Weaver, Ashley A; Talton, Jennifer W; Barnard, Ryan T; Petty, John K; Stitzel, Joel D

2017-05-01

Mortality rates among children in motor vehicle crashes (MVCs) are typically low; however, nonfatal injuries can vary in severity by imposing differing levels of short- and long-term disability. To better discriminate the severity of nonfatal MVC injuries, a pediatric-specific disability risk (DR) metric was created. The National Automotive Sampling System 2000 to 2011 was used to define the top 95% most common Abbreviated Injury Scale (AIS) 2+ injuries among pediatric MVC occupants. Functional Independence Measure scores were abstracted from the National Trauma Data Bank 2002 to 2006. Multiple imputation was used to account for missing data. The DR and coinjury-adjusted DR (DRMAIS) of the most common AIS 2+ MVC-induced injuries were calculated for 7-year-old to 18-year-old children by determining the proportion of those disabled after an injury to those sustaining the injury. DR and DRMAIS values ranged from 0 to 1, representing 0% to 100% DR. The mean DR and DRMAIS of all injuries were 0.290 and 0.191, respectively. DR and DRMAIS were greatest for injuries to the head (DR, 0.340; DRMAIS, 0.279), thorax (DR, 0.320; DRMAIS, 0.233), and spine (DR, 0.315; DRMAIS, 0.200). The mean DR and DRMAIS increased with increasing AIS severity but there was significant variation and overlapping values across AIS severity levels. Comparison of DRMAIS to coinjury-adjusted mortality risk (MRMAIS) revealed that among 118 injuries with MRMAIS of 0.000, DRMAIS ranged from 0.000 to 0.429. Incorporation of DR metrics into injury severity metrics may improve the ability to distinguish between the severity of different nonfatal injuries. This is especially crucial in the pediatric population where permanent disability can result in a high number of years lost due to disability. The accuracy of such severity metrics is crucial to the success of pediatric triage algorithms such as Advanced Automatic Crash Notification algorithms. Epidemiologic/prognostic study, level III.

New evidence concerning fatal crashes of passenger vehicles before and after adding antilock braking systems.

PubMed

Farmer, C M

2001-05-01

Fatal crash rates for passenger cars and vans were compared for the last model year before four-wheel antilock brakes were introduced and the first model year for which antilock brakes were standard equipment. A prior study, based on fatal crash experience through 1995, reported that vehicle models with antilock brakes were more likely than identical but 1-year-earlier models to be involved in crashes fatal to their own occupants, but were less likely to be involved in crashes fatal to occupants of other vehicles. Overall, there was no significant effect of antilocks on the likelihood of fatal crashes. Similar analyses, based on fatal crash experience during 1996-98, yielded very different results. During 1996-98, vehicles with antilock brakes were again less likely than earlier models to be involved in crashes fatal to occupants of other vehicles, but they were no longer overinvolved in crashes fatal to their own occupants.

Occurrence of serious injury in real-world side impacts of vehicles with good side-impact protection ratings.

PubMed

Brumbelow, Matthew L; Mueller, Becky C; Arbelaez, Raul A

2015-01-01

The Insurance Institute for Highway Safety (IIHS) introduced its side impact consumer information test program in 2003. Since that time, side airbags and structural improvements have been implemented across the fleet and the proportion of good ratings has increased to 93% of 2012-2014 model year vehicles. Research has shown that drivers of good-rated vehicles are 70% less likely to die in a left-side crash than drivers of poor-rated vehicles. Despite these improvements, side impact fatalities accounted for about one quarter of passenger vehicle occupant fatalities in 2012. This study is a detailed analysis of real-world cases with serious injury resulting from side crashes of vehicles with good ratings in the IIHS side impact test. NASS-CDS and Crash Injury Research and Engineering Network (CIREN) were queried for occupants of good-rated vehicles who sustained an Abbreviated Injury Scale (AIS) ≥ 3 injury in a side-impact crash. The resulting 110 cases were categorized by impact configuration and other factors that contributed to injury. Patterns of impact configuration, restraint performance, and occupant injury were identified and discussed in the context of potential upgrades to the current IIHS side impact test. Three quarters of the injured occupants were involved in near-side impacts. For these occupants, the most common factors contributing to injury were crash severities greater than the IIHS test, inadequate side-airbag performance, and lack of side-airbag coverage for the injured body region. In the cases where an airbag was present but did not prevent the injury, occupants were often exposed to loading centered farther forward on the vehicle than in the IIHS test. Around 40% of the far-side occupants were injured from contact with the struck-side interior structure, and almost all of these cases were more severe than the IIHS test. The remaining far-side occupants were mostly elderly and sustained injury from the center console, instrument panel, or

76 FR 55825 - Federal Motor Vehicle Safety Standards, Child Restraint Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... [Docket No. NHTSA-2011-0139] RIN 2127-AJ44 Federal Motor Vehicle Safety Standards, Child Restraint Systems..., amends a provision in Federal Motor Vehicle Safety Standard No. 213, ``Child restraint systems,'' that... forces, accelerations, moments and deflections, which are crucial in evaluating vehicle occupant...

Homogenization of Vehicle Fleet Frontal Crash Pulses from 2000–2010

PubMed Central

Locey, Caitlin M.; Garcia-Espana, J. Felipe; Toh, Akira; Belwadi, Aditya; Arbogast, Kristy B.; Maltese, Matthew R.

2012-01-01

Full-scale vehicle crash tests are performed globally to assess vehicle structure and restraint system performance. The crash pulse, captured by accelerometers mounted within the occupant compartment, measures the motion of the vehicle during the impact event. From an occupant’s perspective, the crash pulse is the inertial event to which the vehicle’s restraint systems must respond in order to mitigate the forces and accelerations that act on a passenger, and thus reduce injury risk. The objective of this study was to quantify the characteristics of crash pulses for different vehicle types in the contemporary North American fleet, and delineate current trends in crash pulse evolution. NHTSA and Transport Canada crash test databases were queried for full-frontal rigid barrier crash tests of passenger vehicles model year 2000–2010 with impact angle equaling zero degrees. Acceleration-time histories were analyzed for all accelerometers attached to the vehicle structure within the occupant compartment. Custom software calculated the following crash pulse characteristics (CPCs): peak deceleration, time of peak deceleration, onset rate, pulse duration, and change in velocity. Vehicle body types were classified by adapting the Highway Loss Data Institute (HLDI) methodology, and vehicles were assigned a generation start year in place of model year in order to more accurately represent structural change over time. 1094 vehicle crash tests with 2795 individual occupant compartment-mounted accelerometers were analyzed. We found greater peak decelerations and and shorter pulse durations across multiple vehicle types in newer model years as compared to older. For midsize passenger cars, large passenger cars, and large SUVs in 56 km/h rigid barrier tests, maximum deceleration increased by 0.40, 0.96, and 1.57 g/year respectively, and pulse duration decreased by 0.74, 1.87, and 2.51 ms/year. We also found that the crash pulse characteristics are becoming more homogeneous in

Modularized multilevel and z-source power converter as renewable energy interface for vehicle and grid-connected applications

NASA Astrophysics Data System (ADS)

Cao, Dong

Due the energy crisis and increased oil price, renewable energy sources such as photovoltaic panel, wind turbine, or thermoelectric generation module, are used more and more widely for vehicle and grid-connected applications. However, the output of these renewable energy sources varies according to different solar radiation, wind speed, or temperature difference, a power converter interface is required for the vehicle or grid-connected applications. Thermoelectric generation (TEG) module as a renewable energy source for automotive industry is becoming very popular recently. Because of the inherent characteristics of TEG modules, a low input voltage, high input current and high voltage gain dc-dc converters are needed for the automotive load. Traditional high voltage gain dc-dc converters are not suitable for automotive application in terms of size and high temperature operation. Switched-capacitor dc-dc converters have to be used for this application. However, high voltage spike and EMI problems exist in traditional switched-capacitor dc-dc converters. Huge capacitor banks have to be utilized to reduce the voltage ripple and achieve high efficiency. A series of zero current switching (ZCS) or zero voltage switching switched-capacitor dc-dc converters have been proposed to overcome the aforementioned problems of the traditional switched-capacitor dc-dc converters. By using the proposed soft-switching strategy, high voltage spike is reduced, high EMI noise is restricted, and the huge capacitor bank is eliminated. High efficiency, high power density and high temperature switched-capacitor dc-dc converters could be made for the TEG interface in vehicle applications. Several prototypes have been made to validate the proposed circuit and confirm the circuit operation. In order to apply PV panel for grid-connected application, a low cost dc-ac inverter interface is required. From the use of transformer and safety concern, two different solutions can be implemented, non

Vehicle year and the risk of car crash injury.

PubMed

Blows, S; Ivers, R Q; Woodward, M; Connor, J; Ameratunga, S; Norton, R

2003-12-01

To quantify the association between vehicle age and risk of car crash injury. Data from a population based case-control study conducted in the Auckland region in 1998/99 was used to examine the adjusted risk of car crash injury or death due to vehicle age, after controlling for a range of known confounders. Cases were all cars involved in crashes in which at least one occupant was hospitalized or killed anywhere in the Auckland region, and controls were randomly selected cars on Auckland roads. The drivers of the 571 case vehicles and 588 control vehicles completed a structured interview. Hospitalisation or death of a vehicle occupant due to car crash injury. Vehicles constructed before 1984 had significantly greater chance of being involved in an injury crash than those constructed after 1994 (odds ratio 2.88, 95% confidence interval (CI) 1.20 to 6.91), after adjustment for potential confounders. There was also a trend for increasing crash risk with each one year increase in vehicle age after adjustment for potential confounders (odds ratio 1.05, 95% CI 0.99 to 1.11; p = 0.09). This study quantifies the increased risk of car crash injury associated with older vehicle year and confirms this as an important public health issue.

Differential Risk of Injury to Child Occupants by SUV Size

PubMed Central

Kallan, Michael J.; Durbin, Dennis R.; Elliott, Michael R.; Arbogast, Kristy B.; Winston, Flaura K.

2004-01-01

In the United States, the sport utility vehicle (SUV) is the fastest growing segment of the passenger vehicle fleet, yet SUVs vary widely in size and crashworthiness. Using data collected from a population-based sample of crashes in insured vehicles, we quantified the risk of injury to child occupants in SUVs by vehicle weight. There is an increased risk in both Small and Midsize SUVs when compared to Large SUVs. Parents who are purchasing a SUV should strongly consider the size of the vehicle and its crashworthiness. PMID:15319119

Do vehicle grants and vehicle adaptations grants promote transport mobility and community access for children with disabilities in Sweden?

PubMed

Sjödin, Linda; Buchanan, Angus; Mundt, Beate; Karlsson, Emelie; Falkmer, Torbjörn

2012-02-01

A vast majority of the journeys made by children with disabilities in Sweden are in the family car, which usually is bought and adapted for the child with governmental subsidies. Despite the important philosophical views about accessible vehicles, little is known about the impact of vehicle adaptations on families' lives. The aim of the study was to investigate parent views about the impact of vehicle grants and vehicle adaptation grants on their children's transport mobility and community access. In total, 434 parents of children with disabilities in Sweden who had received vehicle grants and/or vehicle adaptation grants between 1998-2007 responded to a questionnaire comprising questions with both pre-selected and open-ended answers. A non-responder analysis was performed. Children with disabilities were found to increase their transport mobility and community access in society as vehicle grants and/or vehicle adaptation grants were given to their parents. Their travel patterns and their travel priorities with their family car indicated that family friends and relatives and leisure activities were frequently visited and prioritised destinations. The grants were linked to access to social and family activities, provided environmental gains and led to increased experienced security. The results also showed that the potential to make spontaneous trips had increased substantially and that families experienced feelings of freedom and enhanced community access. The non-responder analysis confirmed these results. According to parents, vehicle grants and vehicle adaptation grants for children with disabilities have a positive impact on the children's transport mobility and community access. © 2011 The Authors. Australian Occupational Therapy Journal © 2011 Occupational Therapy Australia.

Skill acquisition while operating in-vehicle information systems: interface design determines the level of safety-relevant distractions.

PubMed

Jahn, Georg; Krems, Josef F; Gelau, Christhard

2009-04-01

This study tested whether the ease of learning to use human-machine interfaces of in-vehicle information systems (IVIS) can be assessed at standstill. Assessing the attentional demand of IVIS should include an evaluation of ease of learning, because the use of IVIS at low skill levels may create safety-relevant distractions. Skill acquisition in operating IVIS was quantified by fitting the power law of practice to training data sets collected in a driving study and at standstill. Participants practiced manual destination entry with two route guidance systems differing in cognitive demand. In Experiment 1, a sample of middle-aged participants was trained while steering routes of varying driving demands. In Experiment 2, another sample of middle-aged participants was trained at standstill. In Experiment 1, display glance times were less affected by driving demands than by total task times and decreased at slightly higher speed-up rates (0.02 higher on average) than task times collected at standstill in Experiment 2. The system interface that minimized cognitive demand was operated more quickly and was easier to learn. Its system delays increased static task times, which still predicted 58% of variance in display glance times compared with even 76% for the second system. The ease of learning to use an IVIS interface and the decrease in attentional demand with training can be assessed at standstill. Fitting the power law of practice to static task times yields parameters that predict display glance times while driving, which makes it possible to compare interfaces with regard to ease of learning.

Executive report : effects of changing HOV lane occupancy requirements : El Monte busway case study.

DOT National Transportation Integrated Search

2002-09-01

In 1999, the California Legislature passed Senate Bill 63, which lowered the vehicle-occupancy requirement on the El Monte Busway on the San Bernardino (I-10) Freeway from three persons per vehicle (3+) to two persons per vehicle (2+) full time. The ...

Occupational Respiratory Cancer in Korea

PubMed Central

Kim, Hyoung Ryoul

2010-01-01

Malignant mesothelioma and lung cancer are representative examples of occupational cancer. Lung cancer is the leading cause of cancer death, and the incidence of malignant mesothelioma is expected to increase sharply in the near future. Although information about lung carcinogen exposure is limited, it is estimated that the number of workers exposed to carcinogens has declined. The first official case of occupational cancer was malignant mesothelioma caused by asbestos exposure in the asbestos textile industry in 1992. Since then, compensation for occupational respiratory cancer has increased. The majority of compensated lung cancer was due to underlying pneumoconiosis. Other main causative agents of occupational lung cancer included asbestos, hexavalent chromium, and crystalline silica. Related jobs included welders, foundry workers, platers, plumbers, and vehicle maintenance workers. Compensated malignant mesotheliomas were associated with asbestos exposure. Epidemiologic studies conducted in Korea have indicated an elevated risk of lung cancer in pneumoconiosis patients, foundry workers, and asbestos textile workers. Occupational respiratory cancer has increased during the last 10 to 20 yr though carcinogen-exposed population has declined in the same period. More efforts to advance the systems for the investigation, prevention and management of occupational respiratory cancer are needed. PMID:21258597

Investigations of Crashes Involving Pregnant Occupants

PubMed Central

Klinich, Kathleen DeSantis; Schneider, Lawrence W.; Moore, Jamie L.; Pearlman, Mark D.

2000-01-01

Case reports of 16 crashes involving pregnant occupants are presented that illustrate the main conclusions of a crash-investigation program that includes 42 crashes investigated to date. Some unusual cases that are exceptions to the overall trends are also described. The study indicates a strong association between adverse fetal outcome and both crash severity and maternal injury. Proper restraint use, with and without airbag deployment, generally leads to acceptable fetal outcomes in lower severity crashes, while it does not affect fetal outcome in high-severity crashes. Compared to properly restrained pregnant occupants, improperly restrained occupants have a higher risk of adverse fetal outcome in lower severity crashes, which comprise the majority of all motor-vehicle collisions. PMID:11558095

Automated recognition of rear seat occupants' head position using Kinect™ 3D point cloud.

PubMed

Loeb, Helen; Kim, Jinyong; Arbogast, Kristy; Kuo, Jonny; Koppel, Sjaan; Cross, Suzanne; Charlton, Judith

2017-12-01

Child occupant safety in motor-vehicle crashes is evaluated using Anthropomorphic Test Devices (ATD) seated in optimal positions. However, child occupants often assume suboptimal positions during real-world driving trips. Head impact to the seat back has been identified as one important injury causation scenario for seat belt restrained, head-injured children (Bohman et al., 2011). There is therefore a need to understand the interaction of children with the Child Restraint System to optimize protection. Naturalistic driving studies (NDS) will improve understanding of out-of-position (OOP) trends. To quantify OOP positions, an NDS was conducted. Families used a study vehicle for two weeks during their everyday driving trips. The positions of rear-seated child occupants, representing 22 families, were evaluated. The study vehicle - instrumented with data acquisition systems, including Microsoft Kinect™ V1 - recorded rear seat occupants in 1120 driving 26 trips. Three novel analytical methods were used to analyze data. To assess skeletal tracking accuracy, analysts recorded occurrences where Kinect™ exhibited invalid head recognition among a randomly-selected subset (81 trips). Errors included incorrect target detection (e.g., vehicle headrest) or environmental interference (e.g., sunlight). When head data was present, Kinect™ was correct 41% of the time; two other algorithms - filtering for extreme motion, and background subtraction/head-based depth detection are described in this paper and preliminary results are presented. Accuracy estimates were not possible because of their experimental nature and the difficulty to use a ground truth for this large database. This NDS tested methods to quantify the frequency and magnitude of head positions for rear-seated child occupants utilizing Kinect™ motion-tracking. This study's results informed recent ATD sled tests that replicated observed positions (most common and most extreme), and assessed the validity of child

Vehicle year and the risk of car crash injury

PubMed Central

Blows, S; Ivers, R; Woodward, M; Connor, J; Ameratunga, S; Norton, R

2003-01-01

Objective: To quantify the association between vehicle age and risk of car crash injury. Design and setting: Data from a population based case-control study conducted in the Auckland region in 1998/99 was used to examine the adjusted risk of car crash injury or death due to vehicle age, after controlling for a range of known confounders. Cases were all cars involved in crashes in which at least one occupant was hospitalized or killed anywhere in the Auckland region, and controls were randomly selected cars on Auckland roads. The drivers of the 571 case vehicles and 588 control vehicles completed a structured interview. Main outcome measure: Hospitalisation or death of a vehicle occupant due to car crash injury. Results: Vehicles constructed before 1984 had significantly greater chance of being involved in an injury crash than those constructed after 1994 (odds ratio 2.88, 95% confidence interval (CI) 1.20 to 6.91), after adjustment for potential confounders. There was also a trend for increasing crash risk with each one year increase in vehicle age after adjustment for potential confounders (odds ratio 1.05, 95% CI 0.99 to 1.11; p = 0.09). Conclusion: This study quantifies the increased risk of car crash injury associated with older vehicle year and confirms this as an important public health issue. PMID:14693899

Power Conditioning for High-Speed Tracked Vehicles

DOT National Transportation Integrated Search

1971-01-01

The linear induction motor is to provide the propulsion of high-speed tracked vehicles; speed and brake control of the propulsion motor is essential for vehicle operation. The purpose of power conditioning is to provide the power matching interface b...

Power Conditioning for High Speed Tracked Vehicles

DOT National Transportation Integrated Search

1973-01-01

The linear induction motor is to provide the propulsion of high-speed tracked vehicles; speed and brake control of the propulsion motor is essential for vehicle operation. The purpose of power conditioning is to provide the power matching interface b...

RatCar system for estimating locomotion states using neural signals with parameter monitoring: Vehicle-formed brain-machine interfaces for rat.

PubMed

Fukayama, Osamu; Taniguchi, Noriyuki; Suzuki, Takafumi; Mabuchi, Kunihiko

2008-01-01

An online brain-machine interface (BMI) in the form of a small vehicle, the 'RatCar,' has been developed. A rat had neural electrodes implanted in its primary motor cortex and basal ganglia regions to continuously record neural signals. Then, a linear state space model represents a correlation between the recorded neural signals and locomotion states (i.e., moving velocity and azimuthal variances) of the rat. The model parameters were set so as to minimize estimation errors, and the locomotion states were estimated from neural firing rates using a Kalman filter algorithm. The results showed a small oscillation to achieve smooth control of the vehicle in spite of fluctuating firing rates with noises applied to the model. Major variation of the model variables converged in a first 30 seconds of the experiments and lasted for the entire one hour session.

77 FR 4365 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Vehicle...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

...: Notice. SUMMARY: The Department of Labor (DOL) is submitting the Occupational Safety and Health... the Department of Labor, Occupational Safety and Health Administration, Office of Management and.... Agency: Occupational Safety and Health Administration. Title of Collection: Vehicle-Mounted Elevating and...

Vehicle performance evaluation in side impact (MDB) using ES-II dummy

NASA Astrophysics Data System (ADS)

Ganessh, T. S.; Bansode, Praveen; Revankar, Vidyakant; Kumar, Sunil

2018-02-01

Side impact collision is one of the leading causes of death. Protection of people during lateral collision is challenging because of relatively small space available to restraint occupant compared to front. Hence, it is imperative to protect the occupants in side collision. It is a function of vehicle type and restraints for side protection. This paper focuses on evaluation of injury parameters of the ES II dummy during the lateral collision of different vehicles with different spaces, sections and materials. Thus the comparison will enable us to understand the sensitivity of space, B-pillar section and material which affects the injury parameters. This study will help automotive engineers to design side impact crashworthy vehicles.

A Fully Directional Universal Power Electronic Interface for EV, HEV, and PHEV Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onar, Omer C

2012-01-01

This study focuses on a universal power electronic interface that can be utilized in any type of the electric vehicles, hybrid electric vehicles, and plug-in hybrid electric vehicles (PHEVs). Basically, the proposed converter interfaces the energy storage device of the vehicle with the motor drive and the external charger, in case of PHEVs. The proposed converter is capable of operating in all directions in buck or boost modes with a noninverted output voltage (positive output voltage with respect to the input) and bidirectional power flow.

Professional drivers: protection needed for a high-risk occupation.

PubMed Central

Baker, S P; Wong, J; Baron, R D

1976-01-01

"On the job" motor vehicle deaths number more than 4,000 annually in the U.S. and comprise nearly one-third of all work-related deaths. Yet the Department of Labor has set no standards relating to on-the-road safety of the millions of workers whose jobs entail large amounts of driving, and Department of Transportation standards affecting occupational safety cover only drivers in interstate commerce. Drivers of some commercial vehicles, such as heavy trucks, are at special risk of injury because trucks have usually been exempted for many years from federal motor vehicle safety standards--such as standards for brakes and seatbelts--designed to prevent crashes or protect occupants in crashes. Observations based on a series of 150 fatal crashes involving tractor trailers illustrate the need for better protection of this large population of high-risk workers. Clarification of responsibility within the various federal agencies and application of available knowledge and technology are essential. PMID:937611

Fifteen-passenger vans and other transportation options: a comparison of driver, vehicle, and crash characteristics.

PubMed

Potter, Tom; Dubois, Sacha; Haras, Kathy; Bédard, Michel

2013-01-01

Fifteen-passenger vans (15-PVs) are a convenient and economical way to transport small groups of people and many educational, community, and health organizations utilize them. Given recent tragic crashes involving 15-PVs, many organizations are reconsidering their use. The goal of this study was to examine driver, vehicle, and crash characteristics of fatal 15-PV collisions over the past 2 decades in comparison to 3 other common vehicle classes. We used data from the Fatality Analysis Reporting System (years 1991-2008). Driver, vehicle, and crash characteristics were compared by vehicle classes (15-PV, cars, minivans, and intercity buses) using proportions along with odds ratios (using cars as the reference category) for dichotomous variables and means and mean differences for continuous variables. Logistic regression and analysis of variance were used to statistically compare odds and means, respectively. The odds and absolute risk of a first, subsequent, and either rollover by vehicle type and occupancy rate were also examined. Odds and absolute risk of a rollover event by occupancy rate were calculated. Compared to car drivers, van drivers typically had a better past 3-year driving record. Van drivers performed significantly fewer actions suggesting aggressive driving (e.g., speeding). However, the proportion of van drivers who were deemed to have followed improperly or to have overcorrected was greater. A vehicle rollover was cited almost twice as frequently in van crashes compared to other passenger vehicles. Of the 4 vehicle types studied, all were more likely to rollover as their occupancy rates increased. Fully loaded 15-PVs had almost 13 times the odds of rollover compared to fully loaded cars. Minivans when full (7 occupants), often seen as the replacement for 15-PVs, were found to have over 3.5 times the odds of rollover of fully loaded cars. Drivers need to be aware that as occupancy rates of the vehicles they drive rise so does the risk of rollover and

49 CFR 571.208 - Standard No. 208; Occupant crash protection.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., applies to vessels designed to contain a pressurized fluid or gas, and to explosive devices, for use in the above types of motor vehicles as part of a system designed to provide protection to occupants in... seat and the near side of the vehicle and is designed to allow access to more rearward seating...

49 CFR 571.208 - Standard No. 208; Occupant crash protection.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., applies to vessels designed to contain a pressurized fluid or gas, and to explosive devices, for use in the above types of motor vehicles as part of a system designed to provide protection to occupants in... seat and the near side of the vehicle and is designed to allow access to more rearward seating...

49 CFR 571.208 - Standard No. 208; Occupant crash protection.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., applies to vessels designed to contain a pressurized fluid or gas, and to explosive devices, for use in the above types of motor vehicles as part of a system designed to provide protection to occupants in... seat and the near side of the vehicle and is designed to allow access to more rearward seating...

Orbital transfer vehicle studies overview

NASA Technical Reports Server (NTRS)

Perkinson, Don

1987-01-01

An overview is given in viewgraph form of orbital transfer vehicle concept definition and systems analysis studies. Project development flow charts are shown for key milestones from 1985 until 1997. Diagrams of vehicles are given. Information is presented in outline form on technology requirements, cooling of propellant tanks, cryogenic fluid management, quick connect/disconnect fluid interfaces and propellant mass transfer.

Vehicle Theft Identification and Intimation Using GSM & IOT

NASA Astrophysics Data System (ADS)

Eswar Kumar, M.; Thippa Reddy, G.; Sudheer, K.; Reddy, M. Praveen Kumar; Kaluri, Rajesh; Singh Rajput, Dharmendra; Lakshmanna, Kuruva

2017-11-01

Internet of Things is the most predominant innovation associates the things through web. IoT is a technology which interfaces things from different places on the planet. Home mechanization is a wide range innovation in IoT technology on the planet. Home automation constitutes in security issues, controlling gadgets and so on. In existing model, the vehicle theft is distinguished and controlled by physically with GSM module. Furthermore, there are a few in controlling the vehicle is major issue for owner from theft. Here in this paper a technique described to overcome issue of existing one. In this the vehicle is identified, controlled and connected updates with Internet in a simple way. By utilization of AT commands of GSM module a message will be send to the owner that the vehicle is recognized. Action can be taken by sending a reply to GSM module to stop motor of vehicle. Arduino uno board is used to interface the GSM and engine of vehicle with appropriate sensors. Visual studio, Arduino uno are the programming software used to outline this application.

Fatal occupational injuries in the Malaysian construction sector–causes and accidental agents

NASA Astrophysics Data System (ADS)

Ayob, A.; Shaari, A. A.; Zaki, M. F. M.; Munaaim, M. A. C.

2018-04-01

The construction sector is associated with various accidents and fatal injuries. These occupational accidents are caused by numerous factors, such as lack of supervision; lack of adherence to safe work technique; failure to wear personal protective equipment; and failure to comply with the safe use of tools, vehicles, and machines. Using 2013–2016 secondary data from the Department of Occupational Safety and Health and Social Security Organization, this study conducted a descriptive exploration survey to identify common fatal occupational injuries associated with the Malaysian construction sector, as well as their causes and accidental agents. Results indicated that construction, followed by manufacturing, agriculture, forestry, logging, and fishery, are the riskiest job sectors in Malaysia. The highest incidences of occupational casualties were reported in Sarawak, Johor, and Selangor. These states accounted for approximately 13.33% to 18.18% of all cases of fatal occupational accidents. In these states, the lack of safety and health regulations and poor execution of risk management increased the risk of occupational accidents. Falls from heights accounted for 46.28% of fatal occupational injuries. Furthermore, being crushed by objects, materials, or vehicles accounted for 9.09% to 17.36% of fatal occupational injuries. Substandard work environment and transportation and lifting equipment, such as scaffolds, are primary accidental agents. Results of this study could enhance the knowledge and awareness of construction workers and management of job-related injuries to decrease the incidence of fatal occupational accidents.

Occupational Change: What Makes Changers Different?

ERIC Educational Resources Information Center

Kanchier, Carole; Unruh, Wally R.

1989-01-01

This study investigated whether occupational changers differed from nonchangers with respect to (1) personal and demographic variables; (2) experience of the life cycle transition periods; and (3) work values, job satisfaction, and organizational commitment. Changers preferred intrinsic rewards, saw their jobs as vehicles for growth, took risks,…

The relationship between body weight and risk of death and serious injury in motor vehicle crashes.

PubMed

Mock, Charles N; Grossman, David C; Kaufman, Robert P; Mack, Christopher D; Rivara, Frederick P

2002-03-01

We sought to investigate the effect of increased body weight on the risk of death and serious injury to occupants in motor vehicle crashes. We employed a retrospective cohort study design utilizing data from the National Automotive Sampling System, Crashworthiness Data System (CDS), 1993-1996. Subjects in the study included occupants involved in tow-away crashes of passenger cars, light trucks, vans and sport utility vehicles. Two outcomes were analyzed: death within 30 days of the crash and injury severity score (ISS). Two exposures were considered: occupant body weight and body mass index (BMI; kg/m2). Occupant weight was available on 27263 subjects (76%) in the CDS database. Mortality was 0.67%. Increased body weight was associated with increased risk of mortality and increased risk of severe injury. The odds ratio for death was 1.013 (95% CI: 1.007, 1.018) for each kilogram increase in body weight. The odds ratio for sustaining an injury with ISS > or = 9 was 1.008 (95% CI: 1.004, 1.011) for each kilogram increase in body weight. After adjustment for potentially confounding variables (age, gender, seatbelt use, seat position and vehicle curbweight), the significant relationship between occupant weight and mortality persisted. After adjustment, the relationship between occupant weight and ISS was present, although less marked. Similar trends were found when BMI was analyzed as the exposure. In conclusion, increased occupant body weight is associated with increased mortality in automobile crashes. This is probably due in part to increased co-morbid factors in the more overweight occupants. However, it is possibly also due to an increased severity of injury in these occupants. These findings may have implications for vehicle safety design, as well as for transport safety policy.

Shuttle vehicle and mission simulation requirements report, volume 1

NASA Technical Reports Server (NTRS)

Burke, J. F.

1972-01-01

The requirements for the space shuttle vehicle and mission simulation are developed to analyze the systems, mission, operations, and interfaces. The requirements are developed according to the following subject areas: (1) mission envelope, (2) orbit flight dynamics, (3) shuttle vehicle systems, (4) external interfaces, (5) crew procedures, (6) crew station, (7) visual cues, and (8) aural cues. Line drawings and diagrams of the space shuttle are included to explain the various systems and components.

Associations between damage location and five main body region injuries of MAIS 3–6 injured occupants

PubMed Central

Tang, Youming; Cao, Libo; Kan, Steven

2014-01-01

Objectives To examine the damage location distribution of five main body region injuries of maximum abbreviated injury score (MAIS) 3–6 injured occupants for nearside struck vehicle in front-to-side impact crashes. Design and setting MAIS 3–6 injured occupants information was extracted from the US-National Automotive Sampling System/Crashworthiness Data System in the year 2007; it included the head/face/neck, chest, pelvis, upper extremity and lower extremity. Struck vehicle collision damage was classified in a three-dimensional system according to the J224 Collision Deformation Classification of SAE Surface Vehicle Standard. Participants Nearside occupants seated directly adjacent to the struck side of the vehicle with MAIS 3–6 injured, in light truck vehicles–passenger cars (LTV–PC) side impact crashes. Outcome measures Distribution of MAIS 3–6 injured occupants by body regions and specific location of damage (lateral direction, horizontal direction and vertical direction) were examined. Injury risk ratio was also assessed. Results The lateral crush zone contributed to MAIS 3–6 injured occupants (n=705) and 50th centile injury risks when extended into zone 3. When the crush extended to zone 4, the injury risk ratio of MAIS 3–6 injured occupants approached 81%. The horizontal crush zones contributing to the highest injury risk ratio of MAIS 3–6 occupants were zones ‘D’ and ‘Y’, and the injury risk ratios were 25.4% and 36.9%, respectively. In contrast, the lowest injury risk ratio was 5.67% caused by zone ‘B’. The vertical crush zone which contributed to the highest injury risk ratio of MAIS 3–6 occupants was zone ‘E’, whose injury risk ratio was 58%. In contrast, the lowest injury risk ratio was 0.14% caused by zone ‘G+M’. Conclusions The highest injury risk ratio of MAIS 3–6 injured occupants caused by crush intrusion between 40 and 60 cm in LTV–PC nearside impact collisions and the damage region of the struck

29 CFR 1915.93 - Motor vehicle safety equipment, operation and maintenance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Motor vehicle safety equipment, operation and maintenance. 1915.93 Section 1915.93 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

29 CFR 1915.93 - Motor vehicle safety equipment, operation and maintenance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Motor vehicle safety equipment, operation and maintenance. 1915.93 Section 1915.93 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

29 CFR 1915.93 - Motor vehicle safety equipment, operation and maintenance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Motor vehicle safety equipment, operation and maintenance. 1915.93 Section 1915.93 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

Work-related fatal motor vehicle traffic crashes: Matching of 2010 data from the Census of Fatal Occupational Injuries and the Fatality Analysis Reporting System.

PubMed

Byler, Christen; Kesy, Laura; Richardson, Scott; Pratt, Stephanie G; Rodríguez-Acosta, Rosa L

2016-07-01

Motor vehicle traffic crashes (MVTCs) remain the leading cause of work-related fatal injuries in the United States, with crashes on public roadways accounting for 25% of all work-related deaths in 2012. In the United States, the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries (CFOI) provides accurate counts of fatal work injuries based on confirmation of work relationship from multiple sources, while the National Highway Traffic Safety Administration (NHTSA) Fatality Analysis Reporting System (FARS) provides detailed data on fatal MVTCs based on police reports. Characterization of fatal work-related MVTCs is currently limited by data sources that lack either data on potential risk factors (CFOI) or work-relatedness confirmation and employment characteristics (FARS). BLS and the National Institute for Occupational Safety and Health (NIOSH) collaborated to analyze a merged data file created by BLS using CFOI and FARS data. A matching algorithm was created to link 2010 data from CFOI and FARS using date of incident and other case characteristics, allowing for flexibility in variables to address coding discrepancies. Using the matching algorithm, 953 of the 1044 CFOI "Highway" cases (91%) for 2010 were successfully linked to FARS. Further analysis revealed systematic differences between cases identified as work-related by both systems and by CFOI alone. Among cases identified as work-related by CFOI alone, the fatally-injured worker was considerably more likely to have been employed outside the transportation and warehousing industry or transportation-related occupations, and to have been the occupant of a vehicle other than a heavy truck. This study is the first step of a collaboration between BLS, NHTSA, and NIOSH to improve the completeness and quality of data on fatal work-related MVTCs. It has demonstrated the feasibility and value of matching data on fatal work-related traffic crashes from CFOI and FARS. The results will lead to

A Review of the Bayesian Occupancy Filter

PubMed Central

Saval-Calvo, Marcelo; Medina-Valdés, Luis; Castillo-Secilla, José María; Cuenca-Asensi, Sergio; Martínez-Álvarez, Antonio; Villagrá, Jorge

2017-01-01

Autonomous vehicle systems are currently the object of intense research within scientific and industrial communities; however, many problems remain to be solved. One of the most critical aspects addressed in both autonomous driving and robotics is environment perception, since it consists of the ability to understand the surroundings of the vehicle to estimate risks and make decisions on future movements. In recent years, the Bayesian Occupancy Filter (BOF) method has been developed to evaluate occupancy by tessellation of the environment. A review of the BOF and its variants is presented in this paper. Moreover, we propose a detailed taxonomy where the BOF is decomposed into five progressive layers, from the level closest to the sensor to the highest abstract level of risk assessment. In addition, we present a study of implemented use cases to provide a practical understanding on the main uses of the BOF and its taxonomy. PMID:28208638

Relationship between age and lower extremity fractures in frontal motor vehicle collisions.

PubMed

Moran, Stephan G; McGwin, Gerald; Metzger, Jesse S; Alonso, Jorge E; Rue, Loring W

2003-02-01

Older adults (aged > or = 65 years) represent the single fastest growing segment of the United States population and will comprise one in five Americans during the third decade of this century. As this population segment rapidly expands, lower extremity fractures (LE Fx) and their associated disability will become a greater public health concern. The purpose of this study was to quantify the risk for LE Fx from motor vehicle collisions (MVCs) according to age. The 1995 to 2000 National Automotive Sampling System data files were used. Study entry was limited to front-seat occupants involved in frontal MVCs. Risk ratios for LE Fx and age were adjusted for gender, driver versus passenger, seat belt use, airbag deployment, delta-V, intrusion, and vehicle type. Beginning in the fourth decade, there was a trend of higher relative risk for LE Fx with age that reached statistical significance in the seventh decade of life. This study documented an increased risk of LE Fx in older MVC occupants. Efforts to prevent these disabling injuries and to better protect occupants' lower extremities in MVCs should include improved vehicle design and reevaluation of the existing federal motor vehicle safety standards.

Hardware-in-the-loop environment facility to address pilot-vehicle-interface issues of a fighter aircraft

NASA Astrophysics Data System (ADS)

Pandurangareddy, Meenige

2002-07-01

The evolution of Pilot-Vehicle-Interface (PVI) of a fighter aircraft is a complex task. The PVI design involves both static and dynamic issues. Static issues involve the study of reach of controls and switches, ejection path clearance, readability of indicators and display symbols, etc. Dynamic issues involve the study of the effect of aircraft motion on display symbols, pilot emergency handling, situation awareness, weapon aiming, etc. This paper describes a method of addressing the above issues by building a facility with cockpit, which is ergonomically similar to the fighter cockpit. The cockpit is also fitted with actual displays, controls and switches. The cockpit is interfaced with various simulation models of aircraft and outside-window-image generators. The architecture of the facility is designed to represent the latencies of the aircraft and facilitates replacement of simulation models with actual units. A parameter injection facility could be used to induce faults in a comprehensive manner. Pilots could use the facility right from familiarising themselves with procedures to start the engine, take-off, navigate, aim the weapons, handling of emergencies and landing. This approach is being followed and further being enhanced on Cockpit-Environment-Facility (CEF) at Aeronautical Development Agency (ADA), Bangalore, India.

Differential risk of injury in child occupants by passenger car classification.

PubMed

Kallan, Michael J; Durbin, Dennis R; Elliott, Michael R; Menon, Rajiv A; Winston, Flaura K

2003-01-01

In the United States, passenger cars are the most common passenger vehicle, yet they vary widely in size and crashworthiness. Using data collected from a population-based sample of crashes in State Farm-insured vehicles, we quantified the risk of injury to child occupants by passenger car size and classification. Injury risk is predicted by vehicle weight; however, there is an increased risk in both Large vs. Luxury and Sports vs. Small cars, despite similar average vehicle weights in both comparisons. Parents who are purchasing passenger cars should strongly consider the size of the vehicle and its crashworthiness.

Differential Risk of Injury in Child Occupants by Passenger Car Classification

PubMed Central

Kallan, Michael J.; Durbin, Dennis R.; Elliott, Michael R.; Menon, Rajiv A.; Winston, Flaura K.

2003-01-01

In the United States, passenger cars are the most common passenger vehicle, yet they vary widely in size and crashworthiness. Using data collected from a population-based sample of crashes in State Farm-insured vehicles, we quantified the risk of injury to child occupants by passenger car size and classification. Injury risk is predicted by vehicle weight; however, there is an increased risk in both Large vs. Luxury and Sports vs. Small cars, despite similar average vehicle weights in both comparisons. Parents who are purchasing passenger cars should strongly consider the size of the vehicle and its crashworthiness. PMID:12941234

Comprehensive Environmental Informatics System (CEIS) Integrating Crew and Vehicle Environmental Health

NASA Technical Reports Server (NTRS)

Nall, Mark E.

2006-01-01

Integrated Vehicle Health Management (IVHM) systems have been pursued as highly integrated systems that include smart sensors, diagnostic and prognostics software for assessments of real-time and life-cycle vehicle health information. Inclusive to such a system is the requirement to monitor the environmental health within the vehicle and the occupants of the vehicle. In this regard an enterprise approach to informatics is used to develop a methodology entitled, Comprehensive Environmental Informatics System (CEIS). The hardware and software technologies integrated into this system will be embedded in the vehicle subsystems, and maintenance operations, to provide both real-time and life-cycle health information of the environment within the vehicle cabin and of its occupants. This comprehensive information database will enable informed decision making and logistics management. One key element of the CEIS is interoperability for data acquisition and archive between environment and human system monitoring. With comprehensive components the data acquired in this system will use model based reasoning systems for subsystem and system level managers, advanced on-board and ground-based mission and maintenance planners to assess system functionality. Knowledge databases of the vehicle health state will be continuously updated and reported for critical failure modes, and routinely updated and reported for life cycle condition trending. Sufficient intelligence, including evidence-based engineering practices which are analogous to evidencebased medicine practices, will be included in the CEIS to result in more rapid recognition of off-nominal operation to enable quicker corrective actions. This will result from better information (rather than just data) for improved crew/operator situational awareness, which will produce significant vehicle and crew safety improvements, as well as increasing the chance for mission success, future mission planning as well as training. Other

Identification of vehicle components associated with severe thoracic injury in motor vehicle crashes: a CIREN and NASS analysis.

PubMed

Nirula, R; Pintar, F A

2008-01-01

Thoracic trauma secondary to motor vehicle crashes (MVC) continues to be a major cause of morbidity and mortality. Specific vehicle features may increase the risk of severe thoracic injury when striking the occupant. We sought to determine which vehicle contact points were associated with an increased risk of severe thoracic injury in MVC to focus subsequent design modifications necessary to reduce thoracic injury. The National Automotive Sampling System (NASS) databases from 1993 to 2001 and the Crash Injury Research and Engineering Network (CIREN) databases from 1996 to 2004 were analyzed separately using univariate and multivariate logistic regression stratified by restraint use and crash direction. The risk of driver thoracic injury, defined as an abbreviated injury scale (AIS) of score > or =3, was determined as it related to specific points of contact between the vehicle and the driver. The incidence of severe chest injury in NASS and CIREN were 5.5% and 33%, respectively. The steering wheel, door panel, armrest, and seat were identified as contact points associated with an increased risk of severe chest injury. The door panel and arm rest were consistently a frequent cause of severe injury in both the NASS and CIREN data. Several vehicle contact points, including the steering wheel, door panel, armrest and seat are associated with an increased risk of severe thoracic injury when striking the occupant. These elements need to be further investigated to determine which characteristics need to be manipulated in order to reduce thoracic trauma during a crash.

The Effects of Curtain Airbag on Occupant Kinematics and Injury Index in Rollover Crash

PubMed Central

Li, Hongyun; Cui, Dong; Lu, Shuang

2018-01-01

Background Occupant injuries in rollover crashes are associated with vehicle structural performance, as well as the restraint system design. For a better understanding of the occupant kinematics and injury index in certain rollover crash, it is essential to carry out dynamic vehicle rollover simulation with dummy included. Objective This study focused on effects of curtain airbag (CAB) parameters on occupant kinematics and injury indexes in a rollover crash. Besides, optimized parameters of the CAB were proposed for the purpose of decreasing the occupant injuries in such rollover scenario. Method and Material The vehicle motion from the physical test was introduced as the input for the numerical simulation, and the 50% Hybrid III dummy model from the MADYMO database was imported into a simulation model. The restraint system, including a validated CAB module, was introduced for occupant kinematics simulation and injury evaluation. TTF setting, maximum inflator pressure, and protection area of the CAB were analysed. Results After introducing the curtain airbag, the maximum head acceleration was reduced from 91.60 g to 49.52 g, and the neck Mx and neck Fz were reduced significantly. Among these CAB parameters, the TTF setting had the largest effect on the head acceleration which could reduce 8.6 g furthermore after optimization. The neck Fz was decreased from 3766.48 N to 2571.77 N after optimization of CAB protection area. Conclusions Avoiding hard contact is critical for the occupant protection in the rollover crashes. The simulation results indicated that occupant kinematics and certain injury indexes were improved with the help of CAB in such rollover scenario. Appropriate TTF setting and inflator selection could benefit occupant kinematics and injury indexes. Besides, it was advised to optimize the curtain airbag thickness around the head contact area to improve head and neck injury indexes. PMID:29765463

Biomonitoring of styrene occupational exposures: Biomarkers and determinants.

PubMed

Persoons, Renaud; Richard, Justine; Herve, Claire; Montlevier, Sarah; Marques, Marie; Maitre, Anne

2018-06-22

High styrene exposures are still experienced in various occupational settings, requesting regular exposure assessments. The aims of this study were to study occupational exposures in various industrial sectors and to determine factors influencing styrene urinary metabolites levels. Biomonitoring was conducted in 141 workers from fiberglass-reinforced plastic (FRP) manufacture, thermoplastic polymers production, vehicle repair shops and cured-in-place pipe lining (CIPP). Urinary styrene (StyU) as well as Mandelic (MA) / Phenyglyoxylic Acids (PGA) were quantified at the beginning and at the end of week, and multivariate linear regression models were used. StyU levels revealed very low, rarely exceeding 3 µg.L -1 . Highest concentrations of MA + PGA were observed in FRP sector, with levels reaching up to 1100 mg.g -1 of creatinine. Factors influencing end-of-week MA + PGA concentrations were levels at the beginning of week, open molding processes, proximity to the emission source, respiratory protection, styrene content in raw materials. Elevated levels were also observed during CIPP process, whereas thermoplastic injection and vehicle repair shop workers exhibited much lower exposures. Intervention on process (decreasing styrene proportion, using closed molding), protective equipment (local exhaust ventilation, respiratory protection) and individual practices (stringent safety rules) are expected to decrease occupational exposures. Urinary MA + PGA remain the most appropriate biomarkers for occupational biomonitoring. Copyright © 2018. Published by Elsevier B.V.

Census study of real-life near-side crashes with modern side airbag-equipped vehicles in the United States.

PubMed

Sunnevång, Cecilia; Sui, Bo; Lindkvist, Mats; Krafft, Maria

2015-01-01

This study aimed to investigate the crash characteristics, injury distribution, and injury mechanisms for Maximum Abbreviated Injury Score (MAIS) 2+ injured belted, near-side occupants in airbag-equipped modern vehicles. Furthermore, differences in injury distribution for senior occupants compared to non-senior occupants was investigated, as well as whether the near-side occupant injury risk to the head and thorax increases or decreases with a neighboring occupant. National Automotive Sampling System's Crashworthiness Data System (NASS-CDS) data from 2000 to 2012 were searched for all side impacts (GAD L&R, all principal direction of force) for belted occupants in modern vehicles (model year > 1999). Rollovers were excluded, and only front seat occupants over the age of 10 were included. Twelve thousand three hundred fifty-four MAIS 2+ injured occupants seated adjacent to the intruding structure (near-side) and protected by at least one deployed side airbag were studied. To evaluate the injury risk influenced by the neighboring occupant, odds ratio with an induced exposure approach was used. The most typical crash occurred either at an intersection or in a left turn where the striking vehicle impacted the target vehicle at a 60 to 70° angle, resulting in a moderate change of velocity (delta-V) and intrusion at the B-pillar. The head, thorax, and pelvis were the most frequent body regions with rib fracture the most frequent specific injury. A majority of the head injuries included brain injuries without skull fracture, and non-senior rather than senior occupants had a higher frequency of head injuries on the whole. In approximately 50% of the cases there was a neighboring occupant influencing injury outcome. Compared to non-senior occupants, the senior occupants sustained a considerably higher rate of thoracic and pelvis injuries, which should be addressed by improved thorax side airbag protection. The influence on near-side occupant injury risk by the neighboring

Civil aeromedical standards for general-use aerospace transportation vehicles : the space-shuttle follow-on.

DOT National Transportation Integrated Search

1971-07-01

Second-generation general-use aerospace transportation vehicles will evolve, and aerospace medical specialists must provide timely medical criteria for (a) occupant selection, (b) vehicle design features, and (c) operational guidelines. Incorporation...

Remote control for motor vehicle

NASA Technical Reports Server (NTRS)

Johnson, Dale R. (Inventor); Ciciora, John A. (Inventor)

1984-01-01

A remote controller is disclosed for controlling the throttle, brake and steering mechanism of a conventional motor vehicle, with the remote controller being particularly advantageous for use by severely handicapped individuals. The controller includes a remote manipulator which controls a plurality of actuators through interfacing electronics. The remote manipulator is a two-axis joystick which controls a pair of linear actuators and a rotary actuator, with the actuators being powered by electric motors to effect throttle, brake and steering control of a motor vehicle adapted to include the controller. The controller enables the driver to control the adapted vehicle from anywhere in the vehicle with one hand with minimal control force and range of motion. In addition, even though a conventional vehicle is adapted for use with the remote controller, the vehicle may still be operated in the normal manner.

Vehicle Related Factors that Influence Injury Outcome in Head-On Collisions

PubMed Central

Blum, Jeremy J.; Scullion, Paul; Morgan, Richard M.; Digges, Kennerly; Kan, Cing-Dao; Park, Shinhee; Bae, Hanil

2008-01-01

This study specifically investigated a range of vehicle-related factors that are associated with a lower risk of serious or fatal injury to a belted driver in a head-on collision. This analysis investigated a range of structural characteristics, quantities that describes the physical features of a passenger vehicle, e.g., stiffness or frontal geometry. The study used a data-mining approach (classification tree algorithm) to find the most significant relationships between injury outcome and the structural variables. The algorithm was applied to 120,000 real-world, head-on collisions, from the National Highway Traffic Safety Administration’s (NHTSA’s) State Crash data files, that were linked to structural attributes derived from frontal crash tests performed as part of the USA New Car Assessment Program. As with previous literature, the analysis found that the heavier vehicles were correlated with lower injury risk to their drivers. This analysis also found a new and significant correlation between the vehicle’s stiffness and injury risk. When an airbag deployed, the vehicle’s stiffness has the most statistically significant correlation with injury risk. These results suggest that in severe collisions, lower intrusion in the occupant cabin associated with higher stiffness is at least as important to occupant protection as vehicle weight for self-protection of the occupant. Consequently, the safety community might better improve self-protection by a renewed focus on increasing vehicle stiffness in order to improve crashworthiness in head-on collisions. PMID:19026230

SKITTER/implement mechanical interface

NASA Technical Reports Server (NTRS)

Cash, John Wilson, III; Cone, Alan E.; Garolera, Frank J.; German, David; Lindabury, David Peter; Luckado, Marshall Cleveland; Murphey, Craig; Rowell, John Bryan; Wilkinson, Brad

1988-01-01

SKITTER (Spacial Kinematic Inertial Translatory Tripod Extremity Robot) is a three-legged transport vehicle designed to perform under the unique environment of the moon. The objective of this project was to design a mechanical interface for SKITTER. This mechanical latching interface will allow SKITTER to use a series of implements such as drills, cranes, etc., and perform different tasks on the moon. The design emphasized versatility and detachability; that is, the interface design is the same for all implements, and connection and detachment is simple. After consideration of many alternatives, a system of three identical latches at each of the three interface points was chosen. The latching mechanism satisfies the design constraints because it facilitates connection and detachment. Also, the moving parts are protected from the dusty environment by housing plates.

49 CFR 176.93 - Vehicles having refrigerating or heating equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... combustion motors which expose the occupants of the passenger vehicles to excessive concentrations of exhaust fumes from such motors. (d) A transport vehicle containing solid carbon dioxide as a refrigerant may be... the motor stops it may not be restarted. (c) In the case of a ferry vessel on a voyage exceeding 30...

49 CFR 176.93 - Vehicles having refrigerating or heating equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... combustion motors which expose the occupants of the passenger vehicles to excessive concentrations of exhaust fumes from such motors. (d) A transport vehicle containing solid carbon dioxide as a refrigerant may be... the motor stops it may not be restarted. (c) In the case of a ferry vessel on a voyage exceeding 30...

49 CFR 176.93 - Vehicles having refrigerating or heating equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... combustion motors which expose the occupants of the passenger vehicles to excessive concentrations of exhaust fumes from such motors. (d) A transport vehicle containing solid carbon dioxide as a refrigerant may be... the motor stops it may not be restarted. (c) In the case of a ferry vessel on a voyage exceeding 30...

Considering high occupancy vehicle alternatives in the urban transportation planning process: energy savings. Final report, August 1981-October 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clifford, M.J.; Wickstrom, G.V.

1983-10-01

Preferred treatment of high occupancy vehicles (HOV's), through strategies such as dedicated lanes, can achieve transportation energy conservation. The research presented in this report provides a method for regional planning agencies to assess such HOV facilities, from a travel demand and energy consumption standpoint. The planning process is described and applied in a case study. Products of the case study included estimates of carpool formation and associated fuel savings, and traffic operations on HOV and other facilities in the corridor. The completed process represents a method to examine HOV's under a variety of policy and operational conditions. The process ismore » within the modeling capabilities of other Metropolitan Planning Organizations (MPO's) and should be transferable to other cities and corridors. Additional applications of the HOV estimation and evaluation process are recommended.« less

NASA Occupant Protection Standards Development

NASA Technical Reports Server (NTRS)

Somers, Jeffrey T.; Gernhardt, Michael A.; Lawrence, Charles

2011-01-01

Current National Aeronautics and Space Administration (NASA) occupant protection standards and requirements are based on extrapolations of biodynamic models, which were based on human tests performed under pre-Space Shuttle human flight programs where the occupants were in different suit and seat configurations than is expected for the Multi Purpose Crew Vehicle (MPCV) and Commercial Crew programs. As a result, there is limited statistical validity to the occupant protection standards. Furthermore, the current standards and requirements have not been validated in relevant spaceflight suit, seat configurations or loading conditions. The objectives of this study were to develop new standards and requirements for occupant protection and rigorously validate these new standards with sub-injurious human testing. To accomplish these objectives we began by determining which critical injuries NASA would like to protect for. We then defined the anthropomorphic test device (ATD) and the associated injury metrics of interest. Finally, we conducted a literature review of available data for the Test Device for Human Occupant Restraint New Technology (THOR-NT) ATD to determine injury assessment reference values (IARV) to serve as a baseline for further development. To better understand NASA s environment, we propose conducting sub-injurious human testing in spaceflight seat and suit configurations with spaceflight dynamic loads, with a sufficiently high number of subjects to validate no injury during nominal landing loads. In addition to validate nominal loads, the THOR-NT ATD will be tested in the same conditions as the human volunteers, allowing correlation between human and ATD responses covering the Orion nominal landing environment and commercial vehicle expected nominal environments. All testing will be conducted without the suit and with the suit to ascertain the contribution of the suit to human and ATD responses. In addition to the testing campaign proposed, additional

External viewing of vehicle contents under varying window tinting and illumination conditions.

DOT National Transportation Integrated Search

1995-01-01

The purpose of this study was to determine the degree to which motor vehicle window tint films impede a police officer's ability to see clearly into a stopped vehicle. Three hundred and twenty subjects were asked to view the contems and occupants of ...

76 FR 3211 - Federal Motor Vehicle Safety Standards, Ejection Mitigation; Phase-In Reporting Requirements...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-19

... be tethered near the base of the vehicle's pillars or otherwise designed to keep the impactor within... performance and occupant behavior, and with the FHWA taking the lead, improving roadway designs. Vehicle... remaining in the vehicle during a rollover included improved roof crush resistance and research on whether...

Traffic Safety Facts, 2001: Occupant Protection.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

This document provides statistical information on the benefits of occupant restraint systems in U.S. motor vehicle accidents. Data tables include: (1) estimated number of lives saved by restraint systems (seat belts, air bags, child restraints), 1975-2001; (2) cumulative estimated number of lives saved by safety belt use, 1975-2001; and (3)…

Occupant Protection. Traffic Safety Facts, 2000.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

This document provides statistical information on the benefits of occupant restraint systems in U.S. motor vehicle accidents. Data tables include: (1) estimated number of lives saved by restraint systems (seat belts, air bags, child restraints), 1975-2000; (2) cumulative estimated number of lives saved by safety belt use, 1975-2000; and (3)…

Occupational injury mortality in New Mexico.

PubMed

Fullerton, L; Olson, L; Crandall, C; Sklar, D; Zumwalt, R

1995-10-01

To examine specific risks for occupational injury deaths in New Mexico. Retrospective review of state medical investigator reports from 1980 through 1991 with regard to industry, agent of death, gender, ethnicity, location, and alcohol and other drug involvement. New Mexico residents who were fatally injured while on the job. We identified 613 deaths: 87.1% unintentional, 10.6% homicides, and 2.3% suicides. Industries with the most fatalities were construction (11.8%), oil/gas (10.6%), and farming (8.6%). The primary agents of death were motor vehicles (41.7%), firearms (10.1%), and falling objects (10.0%). Almost all (95.6%) of the decedents were male. However, females were overrepresented among homicide deaths (P < .0001). Most unintentional injuries occurred in rural areas (69.1%), whereas most homicides (73.4%) and suicides (71.4%) occurred in urban areas. Drug or alcohol use was evident in 19.4% of cases. New Mexico has a high rate of occupational injury death, which appears to be associated with rural location and use of motor vehicles and alcohol.

Mine-Resistant, Ambush-Protected (MRAP) Vehicles: Background and Issues for Congress

DTIC Science & Technology

2011-03-29

note that almost 80% of roadside attacks against HMMWVs from January 2009 through the end of July 2010 killed vehicle occupants. Attacks against MRAP...2009. 24 Ibid. 25 Scott Calvert, “Aberdeen Tests Military’s Cougar ,” Baltimore Sun, July 12, 2009. Mine-Resistant, Ambush-Protected (MRAP) Vehicles

'Fly Like This': Natural Language Interface for UAV Mission Planning

NASA Technical Reports Server (NTRS)

Chandarana, Meghan; Meszaros, Erica L.; Trujillo, Anna; Allen, B. Danette

2017-01-01

With the increasing presence of unmanned aerial vehicles (UAVs) in everyday environments, the user base of these powerful and potentially intelligent machines is expanding beyond exclusively highly trained vehicle operators to include non-expert system users. Scientists seeking to augment costly and often inflexible methods of data collection historically used are turning towards lower cost and reconfigurable UAVs. These new users require more intuitive and natural methods for UAV mission planning. This paper explores two natural language interfaces - gesture and speech - for UAV flight path generation through individual user studies. Subjects who participated in the user studies also used a mouse-based interface for a baseline comparison. Each interface allowed the user to build flight paths from a library of twelve individual trajectory segments. Individual user studies evaluated performance, efficacy, and ease-of-use of each interface using background surveys, subjective questionnaires, and observations on time and correctness. Analysis indicates that natural language interfaces are promising alternatives to traditional interfaces. The user study data collected on the efficacy and potential of each interface will be used to inform future intuitive UAV interface design for non-expert users.

X-24C research vehicle

NASA Technical Reports Server (NTRS)

1974-01-01

A group of experiments that might be accomplished on the X-24C research vehicle are discussed indicating in each case the technology development needed to ready the experiments for flight, and also indicating interface problems between the vehicle and the experiment. Experiments that could be cheaply done using test platforms other than the X-24C have been eliminated. Experiments that are clearly applicable only to the X-24C research vehicle are, of course, included. Experiments that might be accomplished on either the X-24C or some other platform requiring further investigation concerning proper applicability are included for consideration.

Truck and Transport Mechanic. Occupational Analyses Series.

ERIC Educational Resources Information Center

McRory, Aline; Ally, Mohamed

This analysis covers tasks performed by a truck and transport mechanic, an occupational title some provinces and territories of Canada have also identified as commercial transport vehicle mechanic; transport truck mechanic; truck and coach technician; and truck and transport service technician. A guide to analysis discusses development, structure,…

Communicating with residential electrical devices via a vehicle telematics unit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roth, Rebecca C.; Pebbles, Paul H.

A method of communicating with residential electrical devices using a vehicle telematics unit includes receiving information identifying a residential electrical device to control; displaying in a vehicle one or more controlled features of the identified residential electrical device; receiving from a vehicle occupant a selection of the displayed controlled features of the residential electrical device; sending an instruction from the vehicle telematics unit to the residential electrical device via a wireless carrier system in response to the received selection; and controlling the residential electrical device using the sent instruction.

Biomechanical analysis of protective countermeasures in underride motor vehicle accidents - biomed 2009.

PubMed

Kumar, Sri; Enz, Bruce; Ponder, Perry L; Anderson, Bob

2009-01-01

Traffic safety has been significantly improved over the past several decades reducing injury and fatality rates. However, there is a paucity of research effort to address the safety issues in underride accidents, specifically the side underride crashes. It is well known that the compromise of occupant space in the vehicle leads to a higher probability of serious or fatal injuries. A better understanding of occupant protection and mechanism of injuries involved in side underride accidents assists in the advancement of safety measures. The present work evaluates the injury potential to occupants during side underride crashes using the car-to-trailer crash methodology. Four crash tests were conducted into the side of a stationary trailer fitted with the side underride guard system (SURG). The SURG used in these tests is 25% lighter than the previous design. A 5th percentile hybrid III female dummy was placed in the driver seat and restrained with the three-point lap and shoulder harness. The anthropometric dummy was instrumented with a head triaxial accelerometer, a chest triaxal accelerometer, a load cell to measure neck force and moment, and a load cell to measure the femur force. The vehicle acceleration was measured using a traxial accelerometer in the rear center tunnel. High speed, standard video and still photos were taken. In all tests, the intrusion was limited to the front structure of the vehicle without any significant compromise to the occupant space. Results indicate that the resultant head and chest accelerations, head injury criterion (HIC), neck force and moment, and femur force were well below the injury tolerance. The present findings support the hypothesis that the SURG not only limits or eliminates the intrusion into the occupant space but also results in biomechanical injury values well below the tolerance limit in motor vehicle crashes.

Modeling and validation of a detailed FE viscoelastic lumbar spine model for vehicle occupant dummies.

PubMed

Amiri, Sorosh; Naserkhaki, Sadegh; Parnianpour, Mohamad

2018-06-19

The dummies currently used for predicting vehicle occupant response during frontal crashes or whole-body vibration provide insufficient information about spinal loads. Although they aptly approximate upper-body rotations in different loading scenarios, they overlook spinal loads, which are crucial to injury assessment. This paper aims to develop a modified dummy finite element (FE) model with a detailed viscoelastic lumbar spine. This model has been developed and validated against in-vitro and in-silico data under different loading conditions, and its predicted ranges of motion (RoM) and intradiscal pressure (IDP) maintain close correspondence with the in-vitro data. The dominant frequency of the model was f = 8.92 Hz, which was close to previous results. In the relaxation test, a force reduction of up to 21% was obtained, showing high agreement in force relaxation during the in-vitro test. The FE lumbar spine model was placed in the HYBRID III test dummy and aligned in a seated position based on available MRI data. Under two impulsive acceleration loadings in flexion and lateral directions with a peak acceleration of 60 m/s 2 , flexion responses of the modified and original dummies were close (RoMs of 29.1° and 29.6°, respectively), though not in lateral bending (RoMs of 34.1° and 15.6°, respectively), where the modified dummy was more flexible than the original. By reconstructing a real frontal crash, it was found that the modified dummy provided a 10% reduction in the Head Injury Criterion (HIC). Other than the more realistic behavior of this modified dummy, its capability of approximating lumbar loads and risk of lumbar spine injuries in vehicle crashes or whole-body vibration is of great importance. Copyright © 2018 Elsevier Ltd. All rights reserved.

Comparison of pregnant and non-pregnant occupant crash and injury characteristics based on national crash data.

PubMed

Manoogian, Sarah

2015-01-01

The objective of this study was to provide specific characteristics of injuries and crash characteristics for pregnant occupants from the National Automotive Sampling System/Crashworthiness Data System (NASS/CDS) database for pregnant women as a group, broken down by trimester, and compared to non-pregnant women. Using all NASS/CDS cases collected between the years 2000 and 2012 with at least one pregnant occupant, the entire pregnant data set included 321,820 vehicles, 324,535 occupants, and 640,804 injuries. The pregnant occupant data were compared to the characteristics of NASS/CDS cases for 14,719,533 non-pregnant females 13-44 years old in vehicle crashes from 2000 to 2012. Sixty five percent of pregnant women were located in the front left seat position and roughly the same percentage of pregnant women was wearing a lap and shoulder belt. The average change in velocity was 11.6 mph for pregnant women and over 50% of crashes for pregnant women were frontal collisions. From these collisions, less than seven percent of pregnant women sustained MAIS 2+ injuries. Minor differences between the pregnant and non-pregnant occupants were identified in the body region and source of injuries sustained. However, the data indicated no large differences in injury or crash characteristics based on trimester of pregnancy. Moreover, the risk of an MAIS 2+ level injury for pregnant occupants is similar to the risk of injury for non-pregnant occupants based on the total vehicle change in velocity. Overall this study provides useful data for researchers to focus future efforts in pregnant occupant research. Additionally, this study reinforces that more detailed and complete data on pregnant crashes needs to be collected to understand the risk for pregnant occupants. Copyright © 2014 Elsevier Ltd. All rights reserved.

Lightning Protection Guidelines for Aerospace Vehicles

NASA Technical Reports Server (NTRS)

Goodloe, C. C.

1999-01-01

This technical memorandum provides lightning protection engineering guidelines and technical procedures used by the George C. Marshall Space Flight Center (MSFC) Electromagnetics and Aerospace Environments Branch for aerospace vehicles. The overviews illustrate the technical support available to project managers, chief engineers, and design engineers to ensure that aerospace vehicles managed by MSFC are adequately protected from direct and indirect effects of lightning. Generic descriptions of the lightning environment and vehicle protection technical processes are presented. More specific aerospace vehicle requirements for lightning protection design, performance, and interface characteristics are available upon request to the MSFC Electromagnetics and Aerospace Environments Branch, mail code EL23.

Space Shuttle Solid Rocket Booster decelerator subsystem - Air drop test vehicle/B-52 design

NASA Technical Reports Server (NTRS)

Runkle, R. E.; Drobnik, R. F.

1979-01-01

The air drop development test program for the Space Shuttle Solid Rocket Booster Recovery System required the design of a large drop test vehicle that would meet all the stringent requirements placed on it by structural loads, safety considerations, flight recovery system interfaces, and sequence. The drop test vehicle had to have the capability to test the drogue and the three main parachutes both separately and in the total flight deployment sequence and still be low-cost to fit in a low-budget development program. The design to test large ribbon parachutes to loads of 300,000 pounds required the detailed investigation and integration of several parameters such as carrier aircraft mechanical interface, drop test vehicle ground transportability, impact point ground penetration, salvageability, drop test vehicle intelligence, flight design hardware interfaces, and packaging fidelity.

Association between side air bags and risk of injury in motor vehicle collisions with near-side impact.

PubMed

McGwin, Gerald; Metzger, Jesse; Porterfield, John R; Moran, Stephan G; Rue, Loring W

2003-09-01

Side air bags (SABs) have been introduced in an attempt to reduce the risk of injury in near-side-impact motor vehicle collisions (MVCs). The impact of SABs on MVC-related mortality and morbidity has yet to be evaluated with a large population-based study. The objective of this study was to assess the effectiveness of SABs in reducing the risk of injury or death in near-side-impact MVCs. A retrospective study investigated outboard front seat occupants involved in police-reported, near-side-impact MVCs using data from the General Estimates System (1997-2000). The risk of MVC-related nonfatal and fatal injury for occupants of vehicles with and without SABs was compared. Front seat occupants of vehicles with SABs had a risk of injury similar to that of occupants of vehicles without SABs (risk ratio [RR], 0.96; 95% CI confidence interval [CI], 0.79-1.15). Adjustment for the potentially confounding effects of age, gender, seat belt use, seating position, damage severity and location, and vehicle body type did not meaningfully affect the association (RR, 0.90; 95% CICI, 0.76-1.08). There is no association between the availability of SABs and overall injury risk in near-side-impact MVCs. Future research is necessary to determine the effectiveness of SABs in preventing the injuries for which they were specifically designed.

Crash-related mortality and model year: are newer vehicles safer?

PubMed

Ryb, Gabriel E; Dischinger, Patricia C; McGwin, Gerald; Griffin, Russell L

2011-01-01

The objective of this study was to determine whether occupants of newer vehicles experience a lower risk of crash-related mortality. The occurrence of death was studied in relation to vehicle model year (MY) among front seat vehicular occupants, age ≥ 16 captured in the National Automotive Sampling System Crashworthiness Data System (NASS-CDS) between 2000 and 2008. The associations between death and other occupant, vehicular and crash characteristics were also explored. Multiple logistic regression models for the prediction of death were built with model year as the independent variable and other characteristics linked to death as covariates. Imputation was used for missing data; weighted data was used. A total of 70,314 cases representing 30,514,372 weighted cases were available for analysis. Death occurred in 0.6% of the weighted population. Death was linked to age>60, male gender, higher BMI, near lateral direction of impact, high delta v, rollover, ejection and vehicle mismatch, and negatively associated with seatbelt use and rear and far lateral direction of impact. Mortality decreased with later model year groups (MY<94 0.78%, MY 94-97 0.53%, MY 98-04 0.51% and MY 05-08 0.38%, p=<0.0001). After adjustment for confounders, MY 94-97, MY 98-04 and MY 05-08 showed decreased odds of death [OR 0.80 (0.69-0.94), 0.82 (0.70-0.97), and 0.67 (0.47-0.96), respectively] when compared to MY <94. Newer vehicles are associated with lower crash-related mortality. Their introduction into the vehicle fleet may explain, at least in part, the decrease in mortality rates in the past two decades.

Interface concerns of ejector integration in V/STOL aircraft

NASA Technical Reports Server (NTRS)

Lowry, R. B.

1979-01-01

A number of areas which have in the past contributed to weight, complexity, and thrust losses in the ejector-powered V/STOL vehicle were identified. Most of these interfaces taken singly do not represent a severe compromise to the vehicle; however, the bottom line is that the sum of compromises and the subsequent effects on performance, flight operations and maintenance have rendered the ejector V/STOL aircraft unattractive. In addition to some of the unique ejector/aircraft integration problems, the vehicle by virtue of having a V/STOL capability, is compromised in other areas. To be successful and acceptable, the advantages must outweight the disadvantages and simplicity with minimum penalties must be the rule. It is concluded that more emphasis must be placed on the ejector/aircraft interface for the concept to be successful.

Automated mixed traffic vehicle control and scheduling study

NASA Technical Reports Server (NTRS)

Peng, T. K. C.; Chon, K.

1976-01-01

The operation and the expected performance of a proposed automatic guideway transit system which uses low speed automated mixed traffic vehicles (AMTVs) were analyzed. Vehicle scheduling and headway control policies were evaluated with a transit system simulation model. The effect of mixed traffic interference on the average vehicle speed was examined with a vehicle pedestrian interface model. Control parameters regulating vehicle speed were evaluated for safe stopping and passenger comfort. Some preliminary data on the cost and operation of an experimental AMTV system are included. These data were the result of a separate task conducted at JPL, and were included as background information.

The association between booster seat use and risk of death among motor vehicle occupants aged 4-8: a matched cohort study.

PubMed

Rice, T M; Anderson, C L; Lee, A S

2009-12-01

To estimate the effectiveness of booster seats and of seatbelts in reducing the risk of child death during traffic collisions and to examine possible effect modification by various collision and vehicle characteristics. A matched cohort study was conducted using data from the Fatality Analysis Reporting System. Death risk ratios were estimated with conditional Poisson regression, bootstrapped coefficient standard errors, and multiply imputed missing values using chained equations. Estimated death risk ratios for booster seats used with seatbelts were 0.33 (95% CI 0.28 to 0.40) for children age 4-5 years and 0.45 (0.31 to 0.63) for children aged 6-8 years (Wald test of homogeneity p<0.005). The estimated risk ratios for seatbelt used alone were similar for the two age groups, 0.37 (0.32 to 0.43) and 0.39 (0.34 to 0.44) for ages 4-5 and 6-8, respectively (Wald p = 0.61). Estimated booster seat effectiveness was significantly greater for inbound seating positions (Wald p = 0.05) and during rollovers collisions (Wald p = 0.01). Significant variability in risk ratio estimates was not observed across levels of calendar year, vehicle model year, vehicle type, or land use. Seatbelts, used with or without booster seats, are highly effective in preventing death among motor vehicle occupants aged 4-8 years. Booster seats do not appear to improve the performance of seatbelts with respect to preventing death (risk ratio 0.92, 95% CI 0.79 to 1.08, comparing seatbelts with boosters to seatbelts alone), but because several studies have found that booster seats reduce non-fatal injury severity, clinicians and injury prevention specialists should continue to recommend the use of boosters to parents of young children.

Climate Control Load Reduction Strategies for Electric Drive Vehicles in Warm Weather

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffers, M. A.; Chaney, L.; Rugh, J. P.

Passenger compartment climate control is one of the largest auxiliary loads on a vehicle. Like conventional vehicles, electric vehicles (EVs) require climate control to maintain occupant comfort and safety, but cabin heating and air conditioning have a negative impact on driving range for all electric vehicles. Range reduction caused by climate control and other factors is a barrier to widespread adoption of EVs. Reducing the thermal loads on the climate control system will extend driving range, thereby reducing consumer range anxiety and increasing the market penetration of EVs. Researchers at the National Renewable Energy Laboratory have investigated strategies for vehiclemore » climate control load reduction, with special attention toward EVs. Outdoor vehicle thermal testing was conducted on two 2012 Ford Focus Electric vehicles to evaluate thermal management strategies for warm weather, including solar load reduction and cabin pre-ventilation. An advanced thermal test manikin was used to assess a zonal approach to climate control. In addition, vehicle thermal analysis was used to support testing by exploring thermal load reduction strategies, evaluating occupant thermal comfort, and calculating EV range impacts. Through stationary cooling tests and vehicle simulations, a zonal cooling configuration demonstrated range improvement of 6%-15%, depending on the drive cycle. A combined cooling configuration that incorporated thermal load reduction and zonal cooling strategies showed up to 33% improvement in EV range.« less

Assessing the effectiveness of Montana's vehicle occupant protection program : [summary].

DOT National Transportation Integrated Search

2015-03-01

States invest extensively in : occupant protection programs, : yet the impact these programs : have on improving seat belt : compliance rates remains : unclear. Although seat belt use : was on the rise in Montana : prior to 2002, it has stagnated : a...

Injury risks between first- and second-generation airbags in frontal motor vehicle collisions.

PubMed

MacLennan, Paul A; Ashwander, William S; Griffin, Russell; McGwin, Gerald; Rue, Loring W

2008-07-01

Airbags in vehicles manufactured after 1997 were depowered to decrease injury risks for infants/children and small adults. It is possible that compared to earlier airbags second-generation airbags provide less injury protection due to their depowered nature. A cohort study was conducted using 1995-2004 national data. Risk ratios (RRs) and 95% confidence intervals (CIs) compared injury risks for occupants involved in frontal collisions in vehicles wherein a first- or second-generation airbag deployed by body region and injury severity using the Abbreviated Injury Scale (AIS). Associations were adjusted for crash severity, seatbelt use, seat position, occupant location, and vehicle curb weight. For upper extremity injuries reduced RRs were observed for AIS 1 or greater (RR=0.76, CI 0.67-0.86), AIS 2 or greater (RR=0.76, CI 0.58-1.00) and AIS 3 (RR=0.81, CI 0.64-1.03). Elevated risks were observed for AIS 5 thoracic injuries (RR=1.46, CI 1.04-2.07) but were made null when differences in age and gender were adjusted for. Vehicles equipped with first- and second-generation airbags appear to offer similar protection for front-seated occupants. The observed decreased risks for upper extremity injury and increased risks for severe thoracic injuries warrant further attention.

Mechanisms and Mitigation of Head and Spinal Injuries Due to Motor Vehicle Crashes.

PubMed

Ivancic, Paul C

2016-10-01

Synopsis Head and spinal injuries commonly occur during motor vehicle crashes (MVCs). The goal of this clinical commentary is to discuss real-life versus simulated MVCs and to present clinical, biomechanical, and epidemiological evidence of MVC-related injury mechanisms. It will also address how this knowledge may guide and inform the design of injury mitigation devices and assist in clinical decision making. Evidence indicates that there exists no universal injury tolerance applicable to the entire population of the occupants of MVCs. Injuries sustained by occupants depend on a number of factors, including occupant characteristics (age, height, weight, sex, bone mineral density, and pre-existing medical and musculoskeletal conditions), pre-MVC factors (awareness of the impending crash, occupant position, usage of and position of the seatbelt and head restraint, and vehicle specifications), and MVC-related factors (crash orientation, vehicle dynamics, type of active or passive safety systems, and occupant kinematic response). Injuries resulting from an MVC occur due to blunt impact and/or inertial loading. An S-shaped curvature of the cervical spine and associated injurious strains have been documented during rear-, frontal-, and side-impact MVCs. Data on the injury mechanism and the quantification of spinal instability guide and inform the emergent and subsequent conservative or surgical care. Such care may require determining optimal patient positioning during transport, which injuries may be treated conservatively, whether reduction should be performed, optimal patient positioning intraoperatively, and whether bracing should be worn prior to and/or following surgery. The continued improvement of traditional injury mitigation systems, such as seats, seatbelts, airbags, and head restraints, together with research of newer collision-avoidance technologies, will lead to safer motor vehicles and ultimately more effective injury management strategies. J Orthop Sports

Orbital operation study. Volume 3: Basic vehicle summaries

NASA Technical Reports Server (NTRS)

Anderson, N. R.; Gianformaggio, A.

1972-01-01

The vehicle related data developed during the orbital operations study are described. The interfacing activity findings have been realigned into the four basic vehicle systems as follows: (1) earth orbital shuttle (EOS), (2) research and applications module (RAM), (3) space based, ground based, manned and unmanned tugs, and (4) modular space station (MSS).

Commercial Vehicle Driving. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This guide identifies considerations in the organization, operation, and evaluation of secondary and postsecondary vocational education programs. It contains both a vocational program guide and Career Merit Achievement Plan (Career MAP) for commercial vehicle driving. The guide contains the following sections: occupational description; program…

Adaptable, modular, multi-purpose space vehicle backplane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judd, Stephen; Dallmann, Nicholas; McCabe, Kevin

An adaptable, modular, multi-purpose (AMM) space vehicle backplane may accommodate boards and components for various missions. The AMM backplane may provide a common hardware interface and common board-to-board communications. Components, connectors, test points, and sensors may be embedded directly into the backplane to provide additional functionality, diagnostics, and system access. Other space vehicle sections may plug directly into the backplane.

Virtual Diagnostics Interface: Real Time Comparison of Experimental Data and CFD Predictions for a NASA Ares I-Like Vehicle

NASA Technical Reports Server (NTRS)

Schwartz, Richard J.; Fleming, Gary A.

2007-01-01

Virtual Diagnostics Interface technology, or ViDI, is a suite of techniques utilizing image processing, data handling and three-dimensional computer graphics. These techniques aid in the design, implementation, and analysis of complex aerospace experiments. LiveView3D is a software application component of ViDI used to display experimental wind tunnel data in real-time within an interactive, three-dimensional virtual environment. The LiveView3D software application was under development at NASA Langley Research Center (LaRC) for nearly three years. LiveView3D recently was upgraded to perform real-time (as well as post-test) comparisons of experimental data with pre-computed Computational Fluid Dynamics (CFD) predictions. This capability was utilized to compare experimental measurements with CFD predictions of the surface pressure distribution of the NASA Ares I Crew Launch Vehicle (CLV) - like vehicle when tested in the NASA LaRC Unitary Plan Wind Tunnel (UPWT) in December 2006 - January 2007 timeframe. The wind tunnel tests were conducted to develop a database of experimentally-measured aerodynamic performance of the CLV-like configuration for validation of CFD predictive codes.

Haptic interface for vehicular touch screens.

DOT National Transportation Integrated Search

2013-02-01

Once the domain of purely physical controls such as knobs, : levers, buttons, and sliders, the vehicle dash is rapidly : transforming into a computer interface. This presents a : challenge for drivers, because the physics-based cues which : make trad...

Vehicle non-exhaust emissions from the tyre-road interface - effect of stud properties, traction sanding and resuspension

NASA Astrophysics Data System (ADS)

Kupiainen, Kaarle J.; Pirjola, Liisa

2011-08-01

In Northern cities respirable street dust emission levels (PM 10) are especially high during spring. The spring time dust has been observed to cause health effects as well as discomfort among citizens. Major sources of the dust are the abrasion products from the pavement and traction sand aggregates that are formed due to the motion of the tyre. We studied the formation of respirable abrasion particles in the tyre-road interface due to tyre studs and traction sanding by a mobile laboratory vehicle Sniffer. The measurements were preformed on a test track, where the influence of varying stud weight and stud number per tyre on PM 10 emissions was studied. Studded tyres resulted in higher emission levels than studless tyres especially with speeds 50 km h -1 and higher; however, by using light weight studs, which approximately halves the weight of studs, or by reducing the number of studs per tyre to half, the emission levels decreased by approximately half. Additionally measurements were done with and without traction sand coverage on the pavement of a public road. After traction sanding the emission levels were not affected by tyre type but by formation and suspension of traction sand related dust from the road surface. The emissions after traction sanding decreased as a function of time as passing vehicles' motion shifted the sand grains away from the areas with most tyre-road contact.

Occupational Injury Prevention Research in NIOSH

PubMed Central

Stout, Nancy

2010-01-01

This paper provided a brief summary of the current strategic goals, activities, and impacts of the NIOSH (National Institute for Occupational Safety and Health) occupational injury research program. Three primary drivers (injury database, stakeholder input, and staff capacity) were used to define NIOSH research focuses to maximize relevance and impact of the NIOSH injury-prevention-research program. Injury data, strategic goals, program activities, and research impacts were presented with a focus on prevention of four leading causes of workplace injury and death in the US: motor vehicle incidents, falls, workplace violence, and machine and industrial vehicle incidents. This paper showcased selected priority goals, activities, and impacts of the NIOSH injury prevention program. The NIOSH contribution to the overall decrease in fatalities and injuries is reinforced by decreases in specific goal areas. There were also many intermediate outcomes that are on a direct path to preventing injuries, such as new safety regulations and standards, safer technology and products, and improved worker safety training. The outcomes serve as an excellent foundation to stimulate further research and worldwide partnership to address global workplace injury problems. PMID:22953170

Association of contact loading in diffuse axonal injuries from motor vehicle crashes.

PubMed

Yoganandan, Narayan; Gennarelli, Thomas A; Zhang, Jiangyue; Pintar, Frank A; Takhounts, Erik; Ridella, Stephen A

2009-02-01

Although studies have been conducted to analyze brain injuries from motor vehicle crashes, the association of head contact has not been fully established. This study examined the association in occupants sustaining diffuse axonal injuries (DAIs). The 1997 to 2006 motor vehicle Crash Injury Research Engineering Network database was used. All crash modes and all changes in velocity were included; ejections and rollovers were excluded; injuries to front and rear seat occupants with and without restraint use were considered. DAI were coded in the database using Abbreviated Injury Scale 1990. Loss of consciousness was included and head contact was based on medical- and crash-related data. Sixty-seven occupants with varying ages were coded with DAI. Forty-one adult occupants (mean, 33 years of age, 171-cm tall, 71-kg weight; 30 drivers, 11 passengers) were analyzed. Mean change in velocity was 41.2 km/h and Glasgow Coma Scale score was 4. There were 33 lateral, 6 frontal, and 2 rear crashes with 32 survivors and 9 were fatalities. Two occupants in the same crash did not sustain DAI. Although skull fractures and scalp injuries occurred in some impacts, head contact was identified in all frontal, rear, and far side, and all but one nearside crashes. Using a large sample size of occupants sustaining DAI in 1991 to 2006 model year vehicles, DAI occurred more frequently in side than frontal crashes, is most commonly associated with impact load transfer, and is not always accompanied by skull fractures. The association of head contact in >95% of cases underscores the importance of evaluating crash-related variables and medical information for trauma analysis. It would be prudent to include contact loading in addition to angular kinematics in the analysis and characterization of DAI.

Technology requirements and readiness for very large vehicles

NASA Technical Reports Server (NTRS)

Conner, D. W.

1979-01-01

Common concerns of very large vehicles in the areas of economics, transportation system interfaces and operational problems were reviewed regarding their influence on vehicle configurations and technology. Fifty-four technology requirements were identified which are judged to be unique, or particularly critical, to very large vehicles. The requirements were about equally divided among the four general areas of aero/hydrodynamics, propulsion and acoustics, structures, and vehicle systems and operations. The state of technology readiness was judged to be poor to fair for slightly more than one half of the requirements. In the classic disciplinary areas, the state of technology readiness appears to be more advanced than for vehicle systems and operations.

Crash-Related Mortality and Model Year: Are Newer Vehicles Safer?

PubMed Central

Ryb, Gabriel E; Dischinger, Patricia C; McGwin, Gerald; Griffin, Russell L

2011-01-01

Objective: The objective of this study was to determine whether occupants of newer vehicles experience a lower risk of crash-related mortality. Methods: The occurrence of death was studied in relation to vehicle model year (MY) among front seat vehicular occupants, age ≥ 16 captured in the National Automotive Sampling System Crashworthiness Data System (NASS-CDS) between 2000 and 2008. The associations between death and other occupant, vehicular and crash characteristics were also explored. Multiple logistic regression models for the prediction of death were built with model year as the independent variable and other characteristics linked to death as covariates. Imputation was used for missing data; weighted data was used. Results: A total of 70,314 cases representing 30,514,372 weighted cases were available for analysis. Death occurred in 0.6% of the weighted population. Death was linked to age>60, male gender, higher BMI, near lateral direction of impact, high delta v, rollover, ejection and vehicle mismatch, and negatively associated with seatbelt use and rear and far lateral direction of impact. Mortality decreased with later model year groups (MY<94 0.78%, MY 94–97 0.53%, MY 98-04 0.51% and MY 05–08 0.38%, p=<0.0001). After adjustment for confounders, MY 94–97, MY 98-04 and MY 05–08 showed decreased odds of death [OR 0.80 (0.69–0.94), 0.82 (0.70–0.97), and 0.67 (0.47–0.96), respectively] when compared to MY <94. Conclusion: Newer vehicles are associated with lower crash-related mortality. Their introduction into the vehicle fleet may explain, at least in part, the decrease in mortality rates in the past two decades. PMID:22105389

Obstructive sleep apnea among commercial motor vehicle drivers: using evidence-based practice to identify risk factors.

PubMed

Olszewski, Kimberly; Wolf, Debra

2013-11-01

Commercial motor vehicle driving is a hazardous occupation, having the third highest fatality rate among common U.S. jobs. Among the estimated 14 million U.S. commercial motor vehicle drivers, the prevalence of obstructive sleep apnea is reported to be 17% to 28%. Despite the identified increased prevalence of obstructive sleep apnea among commercial motor vehicle drivers, federal law does not require that they be screened for obstructive sleep apnea. This article presents an evidence-based practice change project; the authors developed, implemented, and evaluated a screening program to identify commercial motor vehicle drivers' risk for obstructive sleep apnea during commercial driver medical examinations. The results of this practice change indicated screening for obstructive sleep apnea during the commercial driver medical examination led to improved identification of obstructive sleep apnea risk among commercial motor vehicle drivers and should be a clinical standard in occupational health clinics. Copyright 2013, SLACK Incorporated.

Aspergillus prevalence in air conditioning filters from vehicles: taxis for patient transportation, forklifts, and personal vehicles.

PubMed

Viegas, Carla; Moreira, Ricardo; Faria, Tiago; Caetano, Liliana Aranha; Carolino, Elisabete; Gomes, Anita Quintal; Viegas, Susana

2018-05-04

The frequency and importance of Aspergillus infections is increasing worldwide. This study aimed to assess the occupational exposure of forklifts and taxi drivers to Aspergillus spp. Nineteen filters from air conditioning system of taxis, 17 from forklifts and 37 from personal vehicles were assessed. Filters extract were streaked onto MEA, DG18 and in azole-supplemented media. Real-time quantitative PCR amplification of selected Aspergillus species-complex was also performed. Forklifts filter samples presented higher median values. Aspergillus section Nigri was the most observed in forklifts filters in MEA (28.2%) and in azole-supplemented media. DNA from Aspergillus sections Fumigati and Versicolores was successfully amplified by qPCR. This study enlightens the added value of using filters from the air conditioning system to assess Aspergillus spp. occupational exposure. Aspergillus azole resistance screening should be included in future occupational exposure assessments.

Surface and interface sciences of Li-ion batteries. -Research progress in electrode-electrolyte interface-

NASA Astrophysics Data System (ADS)

Minato, Taketoshi; Abe, Takeshi

2017-12-01

The application potential of Li-ion batteries is growing as demand increases in different fields at various stages in energy systems, in addition to their conventional role as power sources for portable devices. In particular, applications in electric vehicles and renewable energy storage are increasing for Li-ion batteries. For these applications, improvements in battery performance are necessary. The Li-ion battery produces and stores electric power from the electrochemical redox reactions between the electrode materials. The interface between the electrodes and electrolyte strongly affects the battery performance because the charge transfer causing the electrode redox reaction begins at this interface. Understanding of the surface structure, electronic structure, and chemical reactions at the electrode-electrolyte interface is necessary to improve battery performance. However, the interface is located between the electrode and electrolyte materials, hindering the experimental analysis of the interface; thus, the physical properties and chemical processes have remained poorly understood until recently. Investigations of the physical properties and chemical processes at the interface have been performed using advanced surface science techniques. In this review, current knowledge and future research prospects regarding the electrode-electrolyte interface are described for the further development of Li-ion batteries.

Is passenger vehicle incompatibility still a problem?

PubMed

Teoh, Eric R; Nolan, Joseph M

2012-01-01

Passenger cars often are at a disadvantage when colliding with light trucks (sport utility vehicles [SUVs] and pickups) due to differences in mass, vehicle structural alignment, and stiffness. In 2003, vehicle manufacturers agreed to voluntary measures to improve compatibility, especially in front-to-front and front-to-side crashes, with full adherence to be achieved by September 2009. This study examined whether fatality rates are consistent with the expected benefit of this agreement. Analyses examined 2 death rates for 1- to 4-year-old passenger vehicles during 2000-2001 and 2008-2009 in the United States: occupant deaths per million registered vehicle years in these vehicles and deaths in other cars that collided with these vehicles in 2-vehicle crashes per million registered vehicle years. These rates were computed for each study period and for cars/minivans (referred to as cars), SUVs, and pickups by curb weight (in 500-pound increments). The latter death rate, referred to as the car crash partner death rate, also was computed for front-to-front crashes and front-to-side crashes where the front of the 1- to 4-year-old vehicle struck the side of the partner car. In both study periods, occupant death rates generally decreased for each vehicle type both with increasing curb weight and over time. SUVs experienced the greatest declines compared with cars and pickups. This is due in part to the early fitment of electronic stability control in SUVs, which drastically reduced the incidence of single-vehicle rollover crashes. Pickups had the highest death rates in both study periods. Car crash partner death rates generally declined over time for all vehicle categories but more steeply for SUVs and pickups colliding with cars than for cars colliding with cars. In fact, the car crash partner death rates for SUVs and cars were nearly identical during 2008-2009, suggesting that the voluntary design changes for compatibility have been effective. Car crash partner death

The wave-based substructuring approach for the efficient description of interface dynamics in substructuring

NASA Astrophysics Data System (ADS)

Donders, S.; Pluymers, B.; Ragnarsson, P.; Hadjit, R.; Desmet, W.

2010-04-01

In the vehicle design process, design decisions are more and more based on virtual prototypes. Due to competitive and regulatory pressure, vehicle manufacturers are forced to improve product quality, to reduce time-to-market and to launch an increasing number of design variants on the global market. To speed up the design iteration process, substructuring and component mode synthesis (CMS) methods are commonly used, involving the analysis of substructure models and the synthesis of the substructure analysis results. Substructuring and CMS enable efficient decentralized collaboration across departments and allow to benefit from the availability of parallel computing environments. However, traditional CMS methods become prohibitively inefficient when substructures are coupled along large interfaces, i.e. with a large number of degrees of freedom (DOFs) at the interface between substructures. The reason is that the analysis of substructures involves the calculation of a number of enrichment vectors, one for each interface degree of freedom (DOF). Since large interfaces are common in vehicles (e.g. the continuous line connections to connect the body with the windshield, roof or floor), this interface bottleneck poses a clear limitation in the vehicle noise, vibration and harshness (NVH) design process. Therefore there is a need to describe the interface dynamics more efficiently. This paper presents a wave-based substructuring (WBS) approach, which allows reducing the interface representation between substructures in an assembly by expressing the interface DOFs in terms of a limited set of basis functions ("waves"). As the number of basis functions can be much lower than the number of interface DOFs, this greatly facilitates the substructure analysis procedure and results in faster design predictions. The waves are calculated once from a full nominal assembly analysis, but these nominal waves can be re-used for the assembly of modified components. The WBS approach thus

Development of a passenger rail vehicle crush zone

DOT National Transportation Integrated Search

1999-04-13

The use of crush zones in passenger rail vehicles is rapidly growing in the United States and throughout the world. Such crush zones are an important part of the crash energy management philosophy of train occupant protection. The objective of this s...

Scenes of fathering: The automobile as a place of occupation.

PubMed

Bonsall, Aaron

2015-01-01

While occupations are increasingly analyzed within contexts, other than the home, the ordinary places that facilitate occupations have been overlooked. The aim of this article is to explore the automobile as a place of occupation using data from an ethnographic study of fathers of children with disabilities. Qualitative data obtained through observations and interviews with the fathers and their families were analyzed using a narrative approach. Properties that influence interactions include opportunities to communicate, the vehicle itself, and electronics. Driving children in the automobile fulfills fathering responsibilities and is a time for connecting. For the fathers in this study, the automobile represents a place for negotiating complex demands of fathering. This study demonstrates not only the importance of the automobile, but also the influence of the immediate space on the construction of occupations.

Vehicle Performance Recorder (VPR)/ HMMWV (High Mobility Multi-Purpose Wheeled Vehicle) Interface Verification.

DTIC Science & Technology

1984-05-01

hybrid transmission used in the VPR vehicle. From these comparisons made with HMMWV Developmental Test data, confidence can be placed in the validity of...I ............ ........ . ... .... ......... I................ l........ igr 3-2 Drwa pul .1 - hg rne 4004 .. d 3000 \\. PR VEIcLE 2000...Engine: GMC, V-8 diesel, 6.2 L. Transmission: Model THM 475/400 ( hybrid ). Transfer: New process 218, full time 4-wheel drive. Differential: Gleasman

Suited Occupant Injury Potential During Dynamic Spacecraft Flight Phases

NASA Technical Reports Server (NTRS)

Dub, Mark O.; McFarland, Shane M.

2010-01-01

In support of the Constellation Space Suit Element [CSSE], a new space-suit architecture will be created for support of Launch, Entry, Abort, Microgravity Extra- Vehicular Activity [EVA], and post-landing crew operations, safety and, under emergency conditions, survival. The space suit is unique in comparison to previous launch, entry, and abort [LEA] suit architectures in that it utilizes rigid mobility elements in the scye (i.e., shoulder) and the upper arm regions. The suit architecture also utilizes rigid thigh disconnect elements to create a quick disconnect approximately located above the knee. This feature allows commonality of the lower portion of the suit (from the thigh disconnect down), making the lower legs common across two suit configurations. This suit must interface with the Orion vehicle seat subsystem, which includes seat components, lateral supports, and restraints. Due to the unique configuration of spacesuit mobility elements, combined with the need to provide occupant protection during dynamic vehicle events, risks have been identified with potential injury due to the suit characteristics described above. To address the risk concerns, a test series has been developed in coordination with the Injury Biomechanics Research Laboratory [IBRL] to evaluate the likelihood and consequences of these potential issues. Testing includes use of Anthropomorphic Test Devices [ATDs; vernacularly referred to as "crash test dummies"], Post Mortem Human Subjects [PMHS], and representative seat/suit hardware in combination with high linear acceleration events. The ensuing treatment focuses on test purpose and objectives; test hardware, facility, and setup; and preliminary results.

Performance of an Automated-Mixed-Traffic-Vehicle /AMTV/ System. [urban people mover

NASA Technical Reports Server (NTRS)

Peng, T. K. C.; Chon, K.

1978-01-01

This study analyzes the operation and evaluates the expected performance of a proposed automatic guideway transit system which uses low-speed Automated Mixed Traffic Vehicles (AMTV's). Vehicle scheduling and headway control policies are evaluated with a transit system simulation model. The effect of mixed-traffic interference on the average vehicle speed is examined with a vehicle-pedestrian interface model. Control parameters regulating vehicle speed are evaluated for safe stopping and passenger comfort.

Near hybrid passenger vehicle development program, phase 1. Appendices C and D, Volume 2

NASA Technical Reports Server (NTRS)

1979-01-01

Results of tradeoff studies are presented in summary form. Various aspects of the overall vehicle design discussed include selection of the base vehicle, the battery pack configuration, structural modifications, occupant protection, vehicle dynamics, and aerodynamics. The drivetrain design and integration, power conditioning unit, battery subsystem, control system, environmental system are described. Specifications, weight breakdown, and energy consumption measures, and advanced technology components are included.

Rollover Injury in Vehicles with High Strength-to-Weight Ratio (SWR) Roofs, Curtain and Side Airbags and Other Safety Improvements.

PubMed

Viano, David C; Parenteau, Chantal S

2018-06-21

This study investigated trends in severe injury and ejection in rollover crashes involving lap-shoulder belted drivers and right-front passengers. It was conducted because of changes in 2009 to consumer information programs and regulations related to rollover protection. The data is presented by model year (MY) of the vehicle in groups from 1995-2016. NASS-CDS cases with 2010-16 MY vehicles were also evaluated to determine the crash circumstances and causes for severe injury of belted occupants in vehicles with a high strength-to-weight (SWR) roof, curtain and side airbags and other safety improvements. 1997-2015 NASS-CDS data was evaluated for severe injury and ejection of lap-shoulder belted front-outboard occupants in light vehicles. Crashes were grouped by front, side, rear and rollover. The injury and ejection data was grouped by vehicle MY: 1995-99, 2000-04, 2005-09 and 2010-16. Only drivers and right-front passengers were included if they were lap-shoulder belted and 15+ years old. Severely injured occupants were defined as those with MAIS 4-6 or fatality (MAIS 4+F). National estimates were made with weighted data using the ratio weight in NASS-CDS. All NASS-CDS electronic cases were evaluated for belted occupants with MAIS 4+F injury in rollovers involving 2010-16 MY vehicles. The crash circumstances and injuries were studied. These vehicles had high SWR roofs to meet IIHS ratings and FMVSS 216. The 1997-2015 NASS-CDS included 2,083,776 belted front occupants in rollover crashes with 24,466 (1.17%) MAIS 4+F injuries. The frequency of rollover crashes has decreased with modern vehicles (p < 0.0001). The 1995-1999 MY vehicles involved in a rollover accounted for 7.03% of all crashes (756,228/10,760,000). The corresponding proportion was 3.57% with 2010-2016 MY vehicles (81,406 v 2,282,062). The risk for MAIS 4+F was 1.325 ± 0.347% in rollover crashes with 1995-99 MY vehicles. It was 27.2% lower in 2010-16 MY vehicles at 0.964 ± 0.331% (p < 0.001). There

Improving Conceptual Design for Launch Vehicles

NASA Technical Reports Server (NTRS)

Olds, John R.

1998-01-01

This report summarizes activities performed during the second year of a three year cooperative agreement between NASA - Langley Research Center and Georgia Tech. Year 1 of the project resulted in the creation of a new Cost and Business Assessment Model (CABAM) for estimating the economic performance of advanced reusable launch vehicles including non-recurring costs, recurring costs, and revenue. The current year (second year) activities were focused on the evaluation of automated, collaborative design frameworks (computation architectures or computational frameworks) for automating the design process in advanced space vehicle design. Consistent with NASA's new thrust area in developing and understanding Intelligent Synthesis Environments (ISE), the goals of this year's research efforts were to develop and apply computer integration techniques and near-term computational frameworks for conducting advanced space vehicle design. NASA - Langley (VAB) has taken a lead role in developing a web-based computing architectures within which the designer can interact with disciplinary analysis tools through a flexible web interface. The advantages of this approach are, 1) flexible access to the designer interface through a simple web browser (e.g. Netscape Navigator), 2) ability to include existing 'legacy' codes, and 3) ability to include distributed analysis tools running on remote computers. To date, VAB's internal emphasis has been on developing this test system for the planetary entry mission under the joint Integrated Design System (IDS) program with NASA - Ames and JPL. Georgia Tech's complementary goals this year were to: 1) Examine an alternate 'custom' computational architecture for the three-discipline IDS planetary entry problem to assess the advantages and disadvantages relative to the web-based approach.and 2) Develop and examine a web-based interface and framework for a typical launch vehicle design problem.

Observations of seating position of front seat occupants relative to the side of the vehicle.

PubMed

Dinas, Arthur; Fildes, Brian N

2002-01-01

This study was an on-road observational study of the seating position and limb position of front seat occupants relevant to the side of the car for a representative sample of occupants during straight road driving and turning manoeuvres. A video camera captured over 650 front-on images of passenger car occupants in Metropolitan Melbourne. Results showed a significant numbers of occupants were seated out-of-position while travelling on the road and that a number of these were seated in a manner that may possibly result in injury from the deployment of a side airbag. This was particularly so while turning, a situation common in many side impacts. A substantial number of front seat occupants' arms were exposed to severe injury in the event of a side impact crash. These findings highlight a number of aspects of seating behaviour of driver and front passengers that need to be taken into account when designing side impact airbags.

From Antarctica to space: Use of telepresence and virtual reality in control of remote vehicles

NASA Technical Reports Server (NTRS)

Stoker, Carol; Hine, Butler P., III; Sims, Michael; Rasmussen, Daryl; Hontalas, Phil; Fong, Terrence W.; Steele, Jay; Barch, Don; Andersen, Dale; Miles, Eric

1994-01-01

In the Fall of 1993, NASA Ames deployed a modified Phantom S2 Remotely-Operated underwater Vehicle (ROV) into an ice-covered sea environment near McMurdo Science Station, Antarctica. This deployment was part of the antarctic Space Analog Program, a joint program between NASA and the National Science Foundation to demonstrate technologies relevant for space exploration in realistic field setting in the Antarctic. The goal of the mission was to operationally test the use of telepresence and virtual reality technology in the operator interface to a remote vehicle, while performing a benthic ecology study. The vehicle was operated both locally, from above a dive hole in the ice through which it was launched, and remotely over a satellite communications link from a control room at NASA's Ames Research Center. Local control of the vehicle was accomplished using the standard Phantom control box containing joysticks and switches, with the operator viewing stereo video camera images on a stereo display monitor. Remote control of the vehicle over the satellite link was accomplished using the Virtual Environment Vehicle Interface (VEVI) control software developed at NASA Ames. The remote operator interface included either a stereo display monitor similar to that used locally or a stereo head-mounted head-tracked display. The compressed video signal from the vehicle was transmitted to NASA Ames over a 768 Kbps satellite channel. Another channel was used to provide a bi-directional Internet link to the vehicle control computer through which the command and telemetry signals traveled, along with a bi-directional telephone service. In addition to the live stereo video from the satellite link, the operator could view a computer-generated graphic representation of the underwater terrain, modeled from the vehicle's sensors. The virtual environment contained an animate graphic model of the vehicle which reflected the state of the actual vehicle, along with ancillary information such

Human Engineering of Space Vehicle Displays and Controls

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Holden, Kritina L.; Boyer, Jennifer; Stephens, John-Paul; Ezer, Neta; Sandor, Aniko

2010-01-01

Proper attention to the integration of the human needs in the vehicle displays and controls design process creates a safe and productive environment for crew. Although this integration is critical for all phases of flight, for crew interfaces that are used during dynamic phases (e.g., ascent and entry), the integration is particularly important because of demanding environmental conditions. This panel addresses the process of how human engineering involvement ensures that human-system integration occurs early in the design and development process and continues throughout the lifecycle of a vehicle. This process includes the development of requirements and quantitative metrics to measure design success, research on fundamental design questions, human-in-the-loop evaluations, and iterative design. Processes and results from research on displays and controls; the creation and validation of usability, workload, and consistency metrics; and the design and evaluation of crew interfaces for NASA's Crew Exploration Vehicle are used as case studies.

Crash characteristics and injury patterns of restrained front seat occupants in far-side impacts.

PubMed

Yoganandan, Narayan; Arun, Mike W J; Halloway, Dale E; Pintar, Frank A; Maiman, Dennis J; Szabo, Aniko; Rudd, Rodney W

2014-01-01

The study was conducted to determine the association between vehicle-, crash-, and demographic-related factors and injuries to front seat far-side occupants in modern environments. Field data were obtained from the NASS-CDS database for the years 2009-2012. Inclusion factors included the following: adult restrained front outboard-seated occupants, no ejection or rollovers, and vehicle model years less than 10 years old at the time of crash. Far-side crashes were determined by using collision deformation classification. Injuries were scored using the Abbreviated Injury Scale (AIS). Injuries (MAIS 2+, MAIS 3+, M denotes maximum score) were examined based on demographics, change in velocity, vehicle type, direction of force, extent zone, collision partner, and presence of another occupant in the front seat. Only weighted data were used in the analysis. Injuries to the head and face, thorax, abdomen, pelvis, and upper and lower extremity regions were studied. Odds ratios and upper and lower confidence intervals were estimated from multivariate analysis. Out of 519,195 far-side occupants, 17,715 were MAIS 2+ and 4,387 were MAIS 3+ level injured occupants. The mean age, stature, total body mass, and body mass index (BMI) were 40.7 years, 1.7 m, 77.2 kg, and 26.8 kg/m2, respectively. Of occupants with MAIS 2+ injuries, 51% had head and 19% had thorax injuries. Of occupants with MAIS 3+ injuries, 50% had head and 69% had thorax injuries. The cumulative distribution of changes in velocities at the 50th percentile for the struck vehicle for all occupants and occupants with MAIS 2+ and MAIS 3+ injuries were 19, 34, and 42 km/h, respectively. Furthermore, 73% of MAIS 2+ injuries and 86% of MAIS 3+ injuries occurred at a change in velocity of 24 km/h or greater. Odds of sustaining MAIS 2+ and MAIS 3+ injuries increased with each unit increase in change in velocity, stature, and age, with one exception. Odds of sustaining injuries were higher with the presence of an occupant in

Crash characteristics and injury patterns of restrained front seat occupants in far-side impacts

PubMed Central

Yoganandan, Narayan; Arun, Mike W. J.; Halloway, Dale E.; Pintar, Frank A.; Maiman, Dennis J.; Szabo, Aniko; Rudd, Rodney W.

2015-01-01

STRUCTURED ABSTRACT Objective The study was conducted to determine the association between vehicle-, crash- and demographic-related factors and injuries to front seat far-side occupants in modern environments. Methods Field data were obtained from the United States (US) National Automotive Sampling System – Crashworthiness Data System (NASS-CDS) database, for the years 2009–2012. Inclusion factors: adult restrained front outboard seated occupants, no ejection or rollovers, and vehicle model years less than 10 years old at the time of crash. Far-side crashes were determined by using collision deformation classification. Injuries were scored using the Abbreviated Injury Scale (AIS). Injuries (MAIS2+, MAIS3+, M denotes maximum score) were examined based on demographics, change in velocity, vehicle type, direction of force, extent zone, collision partner and presence of another occupant in the front seat. Only weighted data were used in the analysis. Injuries to the head and face, thorax, abdomen, pelvis, upper extremity and lower extremity regions were studied. Odds ratios and upper and lower confidence intervals were estimated from multivariate analysis. Results Out of 519,195 far-side occupants, 17,715 were MAIS2+ and 4,387 were MAIS3+ level injured occupants. The mean age, stature, total body mass, and BMI were 40.7 years, 1.7 m, 77.2 kg, and 26.8 kg/m2, respectively. Of occupants with MAIS2+ injuries, 51% had head and 19% had thorax injuries. Of occupants with MAIS 3+ injuries, 50% had head and 69% had thorax injuries. The cumulative distribution of changes in velocities at the 50th percent level for the struck vehicle for all occupants and, MAIS2+ and MAIS3+ occupants were 19, 34 and 42 km/h, respectively. Furthermore, 73% of MAIS2+ injuries and 86% of MAIS3+ injuries occurred at a change in velocity of 24 km/h or greater. Odds of sustaining MAIS2+ and MAIS3+ injuries increased with unit increase in change in velocity, stature and age, with one exception

Field Data on Head Injuries in Side Airbag Vehicles in Lateral Impact

PubMed Central

Yoganandan, Narayan; Pintar, Frank A.; Gennarelli, Thomas A.

2005-01-01

Field data on side airbag deployments in lateral crashes and head injuries have largely remained anecdotal. Consequently, the purpose of this research was to report head injuries in lateral motor vehicle impacts. Data from the National Automotive Sampling System files were extracted from side impacts associated with side airbag deployments. Matched pairs with similar vehicle characteristics but without side airbags were also extracted. All data were limited to the United States Federal Motor vehicle Safety Standards FMVSS 214 compliant vehicles so that the information may be more effectively used in the future. In this study, some fundamental analyses are presented regarding occupant- and vehicle-related parameters. PMID:16179147

Shuttle/Agena study. Volume 2, part 2: Agena tug configurations, Shuttle/Agena interface, performance, safety, cost

NASA Technical Reports Server (NTRS)

1972-01-01

An evaluation of the compatibility of the space shuttle and Agena rocket vehicle was conducted. The Agena space tug configuration design is described in terms of the total vehicle system as well as the individual subsystems and major assemblies and components. The complete interface between the Agena space tug and the space shuttle orbiter is defined for in-flight and ground operations. The derivation and design of an evolutionary stage is also presented. This vehicle conforms to the same guidelines and interface requirements as the Agena space tug. Performance data developed for both vehicles for each of the three study baseline missions are included.

Stomach cancer and occupation in Sweden: 1971–89

PubMed Central

Aragones, N; Pollan, M; Gustavsson, P

2002-01-01

Objectives: To examine the relation between gastric cancer and occupation among men and women gainfully employed in 1970 in Sweden for the period 1971–89 and, more specifically, to evaluate whether any excess of incidence of gastric cancer had also occurred among the subcohort of people reporting the same occupation in 1960 and 1970. Methods: In both sexes and cohorts, relative risks adjusted for age, period of diagnosis, and geographical risk area were computed for occupational codes specified at one, two, or three level (occupational sector, occupational group, and occupation, respectively). Relative risks were calculated with all other occupations as reference and then, to take socioeconomic status into account, solely other occupations within the same occupational sector were used. Results: Among men, occupations with increased risk included miners and quarrymen, construction and metal processing workers, supporting the possible causative role of dusty environments in stomach cancer. In men, the results also provide support for increased risks among electrical and mechanical engineers, fishermen, petrol station workers, motor vehicle drivers, butchers and meat preparers, dockers, freight handlers, launderers and dry cleaners. Furthermore, it is worth noting interesting results for women, whose occupational risks have been studied less. Excess risks were found for practical nurses, cashiers, bank employees, engineering and electronic industry workers, food industry, housekeeping and cleaning workers. Due to the many occupations studied, several significant associations may be expected by chance. Conclusions: The study is explorative but provides support for the relations suggested previously between occupational exposure to dusty environments and stomach cancer, together with some new high risk occupations which should be further studied. PMID:11983848

29 CFR 570.33 - Occupations that are prohibited to minors 14 and 15 years of age.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the maintenance or repair of the establishment, machines, or equipment. (e) Occupations that involve... motor vehicles, the stocking and restocking of sales kits and trays, the exchanging of cash and checks... performance of any duties on trains, motor vehicles, aircraft, vessels, or other media of transportation or at...

29 CFR 570.33 - Occupations that are prohibited to minors 14 and 15 years of age.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the maintenance or repair of the establishment, machines, or equipment. (e) Occupations that involve... motor vehicles, the stocking and restocking of sales kits and trays, the exchanging of cash and checks... performance of any duties on trains, motor vehicles, aircraft, vessels, or other media of transportation or at...

29 CFR 570.33 - Occupations that are prohibited to minors 14 and 15 years of age.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the maintenance or repair of the establishment, machines, or equipment. (e) Occupations that involve... motor vehicles, the stocking and restocking of sales kits and trays, the exchanging of cash and checks... performance of any duties on trains, motor vehicles, aircraft, vessels, or other media of transportation or at...

29 CFR 570.33 - Occupations that are prohibited to minors 14 and 15 years of age.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the maintenance or repair of the establishment, machines, or equipment. (e) Occupations that involve... motor vehicles, the stocking and restocking of sales kits and trays, the exchanging of cash and checks... performance of any duties on trains, motor vehicles, aircraft, vessels, or other media of transportation or at...

Improved guidance hardware study for the scout launch vehicle

NASA Technical Reports Server (NTRS)

Schappell, R. T.; Salis, M. L.; Mueller, R.; Best, L. E.; Bradt, A. J.; Harrison, R.; Burrell, J. H.

1972-01-01

A market survey and evaluation of inertial guidance systems (inertial measurement units and digital computers) were made. Comparisons were made to determine the candidate systems for use in the Scout launch vehicle. Error analyses were made using typical Scout trajectories. A reaction control system was sized for the fourth stage. The guidance hardware to Scout vehicle interface was listed.

Integrated vehicle-based safety systems (IVBSS) : human factors and driver-vehicle interface (DVI) summary report

DOT National Transportation Integrated Search

2008-02-01

The IVBSS program is a four-year, two-phase project to design and evaluate an integrated crash warning system for forward collision, lateral drift, lane-change merge, and curve speed warnings for both light vehicles and heavy trucks. This report, cov...

Improving the in-flight security by employing seat occupancy sensors based on Fiber Bragg grating technology

NASA Astrophysics Data System (ADS)

Zhang, Hongtao; Wang, Pengfei

2012-06-01

The current schemes of detecting the status of passengers in airplanes cannot satisfy the more strict regulations recently released by the United States Transportation Security Administration. In basis of investigation on the current seat occupancy sensors for vehicles, in this paper we present a novel scheme of seat occupancy sensors based on Fiber Bragg Grating technology to improve the in-flight security of airplanes. This seat occupancy sensor system can be used to detect the status of passengers and to trigger the airbags to control the inflation of air bags, which have been installed in the airplanes of some major airlines under the new law. This scheme utilizes our previous research results of Weight-In- Motion sensor system based on optical fiber Bragg grating. In contrast to the current seat occupancy sensors for vehicles, this new seat occupancy sensor has so many merits that it is very suitable to be applied in aerospace industry or high speed railway system. Moreover, combined with existing Fiber Bragg Grating strain or temperature sensor systems built in airplanes, this proposed method can construct a complete airline passenger management system.

The impact of safety belt use on liver injuries in motor vehicle crashes: the importance of motor vehicle safety systems.

PubMed

Holbrook, Troy Lisa; Hoyt, David B; Eastman, A Brent; Sise, Michael J; Kennedy, Frank; Velky, Tom; Conroy, Carol; Pacyna, Sharon; Erwin, Steve

2007-08-01

Liver injuries (LIs) are one of the most serious and common consequences of motor vehicle crashes (MVCs). In the unstable patient, early detection of LI based on clinical suspicion will improve acute trauma care and outcomes. The specific objectives of this analysis are to identify crash scene and occupant risk factors for LI from MVC. Crash Injury Research and Engineering Network data were used to identify risk factors for LI; age, sex, safety belt use, air bag deployment, DeltaV (change in velocity), principal direction of force, vehicle crush, and intrusion. Occupants with LI were compared with four control groups without LI; (1) no abdominal (ABD) injury (NO_ABD), (2) any ABD (ANY_ABD), (3) ABD Abbreviated Injury Scale score of 1 to 2 (ABD_1-2), and (4) ABD Abbreviated Injury Scale score of 3 or more (ABD_3+). LI occupants were compared with each control group and odds ratios (OR) for risk of LI were computed. There were 311 Crash Injury Research and Engineering Network subjects aged 5 or more years with LI. The total mean Injury Severity Score was 37.6. LI was strongly and significantly associated with safety belt restraint use without air bag deployment, compared with each control group: Liver injury - restrained + air bag not deployed versus (1) NO_ABD, N = 1,519; OR = 4.4, (2) ANY_ABD, N = 317; OR = 2.6, (3) ABD_1 to 2, N = 155; OR = 3.1, (4) ABD_3+, N = 217; OR = 2.4 (p < 0.001). This association was independent of driver or passenger status and principal direction of force. LIs were also strongly and significantly associated with greater vehicle interior intrusion. LIs were strongly associated with a safety belt restraint in use in the absence of air bag deployment during MVC. This data may have profound importance to the trauma surgeon as an early indicator for LI during resuscitation. These findings also have important implications for future research efforts to improve safety systems in motor vehicles and reduce morbidity and mortality from MVCs in the

A study and comparison of the effects of low speed change vehicle collisions on the human body.

PubMed

Hoyes, Philip; Henderson, Brian

2013-03-01

In motor vehicle collisions there is a well-established relationship between the level of damage sustained by the vehicle, its change in speed during the collision period, the movement of occupants and the potential for their injury. Greater damage, with respect to structure, means a greater potential for injury. In terms of rear-end impacts, speed change thresholds for injury have been suggested in previous literature. This research uses human test subjects and three full-scale vehicle, rear-end collisions to investigate the correlation between speed change and occupant movement and uses it to test the suggestion of a second threshold where the accelerations are similar to an everyday activity. Copyright © 2012 Elsevier Ltd. All rights reserved.

Skylab rescue space vehicle flight readiness test

NASA Technical Reports Server (NTRS)

Jevitt, S. J.

1973-01-01

A Skylab Rescue Space Vehicle flight readiness test is described which ensures that space vehicle systems are in a state of flight readiness and are compatible with associated ground support equipment. The functions of propellant loading, umbilical ejection, ignition, holddown arm release, liftoff, and service arm and tail service mast retraction are simulated. The test outline is presented along with a list of references, intercommunications information, operations interface control chart, and flight test.

Secondary Collisions Following a Traffic Barrier Impact: Frequency, Factors, and Occupant Risk

PubMed Central

Gabauer, Douglas J.

2010-01-01

This study has investigated secondary collisions following an initial barrier impact in tow-away level crashes. The analysis included 2026 barrier impact cases that were selected from 12-years of in-depth crash data available through the National Automotive Sampling System (NASS) / Crashworthiness Data System (CDS). Secondary collisions were found to occur in approximately one-third of tow-away level crashes where a traffic barrier was the first object struck. Secondary crashes were found to primarily involve an impact to another vehicle, an impact to another barrier, or a rollover; tree and pole impacts were found to represent a much smaller proportion of secondary impacts. Through a detailed analysis of vehicle trajectory, this study supports previous research suggesting secondary collision risk is substantial even for vehicles not ultimately involved in a secondary collision. Compared to a single barrier impact, the occurrence of a secondary collision was found to increase the risk of serious occupant injury by a factor of 3.5, equivalent to the serious injury risk difference found between a belted and unbelted occupant in a traffic barrier crash. PMID:21050605

Effects of BMI on the risk and frequency of AIS 3+ injuries in motor-vehicle crashes.

PubMed

Rupp, Jonathan D; Flannagan, Carol A C; Leslie, Andrew J; Hoff, Carrie N; Reed, Matthew P; Cunningham, Rebecca M

2013-01-01

Determine the effects of BMI on the risk of serious-to-fatal injury (Abbreviated Injury Scale ≥ 3 or AIS 3+) to different body regions for adults in frontal, nearside, farside, and rollover crashes. Multivariate logistic regression analysis was applied to a probability sample of adult occupants involved in crashes generated by combining the National Automotive Sampling System (NASS-CDS) with a pseudoweighted version of the Crash Injury Research and Engineering Network database. Logistic regression models were applied to weighted data to estimate the change in the number of occupants with AIS 3+ injuries if no occupants were obese. Increasing BMI increased risk of lower-extremity injury in frontal crashes, decreased risk of lower-extremity injury in nearside impacts, increased risk of upper-extremity injury in frontal and nearside crashes, and increased risk of spine injury in frontal crashes. Several of these findings were affected by interactions with gender and vehicle type. If no occupants in frontal crashes were obese, 7% fewer occupants would sustain AIS 3+ upper-extremity injuries, 8% fewer occupants would sustain AIS 3+ lower-extremity injuries, and 28% fewer occupants would sustain AIS 3+ spine injuries. Results of this study have implications on the design and evaluation of vehicle safety systems. Copyright © 2013 The Obesity Society.

Unique digital imagery interface between a silicon graphics computer and the kinetic kill vehicle hardware-in-the-loop simulator (KHILS) wideband infrared scene projector (WISP)

NASA Astrophysics Data System (ADS)

Erickson, Ricky A.; Moren, Stephen E.; Skalka, Marion S.

1998-07-01

Providing a flexible and reliable source of IR target imagery is absolutely essential for operation of an IR Scene Projector in a hardware-in-the-loop simulation environment. The Kinetic Kill Vehicle Hardware-in-the-Loop Simulator (KHILS) at Eglin AFB provides the capability, and requisite interfaces, to supply target IR imagery to its Wideband IR Scene Projector (WISP) from three separate sources at frame rates ranging from 30 - 120 Hz. Video can be input from a VCR source at the conventional 30 Hz frame rate. Pre-canned digital imagery and test patterns can be downloaded into stored memory from the host processor and played back as individual still frames or movie sequences up to a 120 Hz frame rate. Dynamic real-time imagery to the KHILS WISP projector system, at a 120 Hz frame rate, can be provided from a Silicon Graphics Onyx computer system normally used for generation of digital IR imagery through a custom CSA-built interface which is available for either the SGI/DVP or SGI/DD02 interface port. The primary focus of this paper is to describe our technical approach and experience in the development of this unique SGI computer and WISP projector interface.

Driver Injury Risk Variability in Finite Element Reconstructions of Crash Injury Research and Engineering Network (CIREN) Frontal Motor Vehicle Crashes.

PubMed

Gaewsky, James P; Weaver, Ashley A; Koya, Bharath; Stitzel, Joel D

2015-01-01

A 3-phase real-world motor vehicle crash (MVC) reconstruction method was developed to analyze injury variability as a function of precrash occupant position for 2 full-frontal Crash Injury Research and Engineering Network (CIREN) cases. Phase I: A finite element (FE) simplified vehicle model (SVM) was developed and tuned to mimic the frontal crash characteristics of the CIREN case vehicle (Camry or Cobalt) using frontal New Car Assessment Program (NCAP) crash test data. Phase II: The Toyota HUman Model for Safety (THUMS) v4.01 was positioned in 120 precrash configurations per case within the SVM. Five occupant positioning variables were varied using a Latin hypercube design of experiments: seat track position, seat back angle, D-ring height, steering column angle, and steering column telescoping position. An additional baseline simulation was performed that aimed to match the precrash occupant position documented in CIREN for each case. Phase III: FE simulations were then performed using kinematic boundary conditions from each vehicle's event data recorder (EDR). HIC15, combined thoracic index (CTI), femur forces, and strain-based injury metrics in the lung and lumbar vertebrae were evaluated to predict injury. Tuning the SVM to specific vehicle models resulted in close matches between simulated and test injury metric data, allowing the tuned SVM to be used in each case reconstruction with EDR-derived boundary conditions. Simulations with the most rearward seats and reclined seat backs had the greatest HIC15, head injury risk, CTI, and chest injury risk. Calculated injury risks for the head, chest, and femur closely correlated to the CIREN occupant injury patterns. CTI in the Camry case yielded a 54% probability of Abbreviated Injury Scale (AIS) 2+ chest injury in the baseline case simulation and ranged from 34 to 88% (mean = 61%) risk in the least and most dangerous occupant positions. The greater than 50% probability was consistent with the case occupant's AIS 2

A Steady-State Visual Evoked Potential Brain-Computer Interface System Evaluation as an In-Vehicle Warning Device

NASA Astrophysics Data System (ADS)

Riyahi, Pouria

This thesis is part of current research at Center for Intelligence Systems Research (CISR) at The George Washington University for developing new in-vehicle warning systems via Brain-Computer Interfaces (BCIs). The purpose of conducting this research is to contribute to the current gap between BCI and in-vehicle safety studies. It is based on the premise that accurate and timely monitoring of human (driver) brain's signal to external stimuli could significantly aide in detection of driver's intentions and development of effective warning systems. The thesis starts with introducing the concept of BCI and its development history while it provides a literature review on the nature of brain signals. The current advancement and increasing demand for commercial and non-medical BCI products are described. In addition, the recent research attempts in transportation safety to study drivers' behavior or responses through brain signals are reviewed. The safety studies, which are focused on employing a reliable and practical BCI system as an in-vehicle assistive device, are also introduced. A major focus of this thesis research has been on the evaluation and development of the signal processing algorithms which can effectively filter and process brain signals when the human subject is subjected to Visual LED (Light Emitting Diodes) stimuli at different frequencies. The stimulated brain generates a voltage potential, referred to as Steady-State Visual Evoked Potential (SSVEP). Therefore, a newly modified analysis algorithm for detecting the brain visual signals is proposed. These algorithms are designed to reach a satisfactory accuracy rate without preliminary trainings, hence focusing on eliminating the need for lengthy training of human subjects. Another important concern is the ability of the algorithms to find correlation of brain signals with external visual stimuli in real-time. The developed analysis models are based on algorithms which are capable of generating results

Unmanned Ground Vehicle

DTIC Science & Technology

2001-11-01

Systems ( JAUGS ). JAUGS is a JRP technology initiative under the cognizance of the Aviation and Missile Command Research, Development and Engineering Center...AMRDEC). The JAUGS focus is on developing a high-level command and control architecture for UGVs. As defined in the JRP Glossary, “ JAUGS is an upper...vehicle platforms and missions. JAUGS uses the Society of Automotive Engineers Generic Open Architecture framework to classify UGV interfaces and

Statistical characterization of the optical interaction at a supercavitating interface

NASA Astrophysics Data System (ADS)

Walters, Gage; Kane, Tim; Jefferies, Rhett; Antonelli, Lynn

2016-05-01

The optical characteristics of an air/water interface have been widely studied for natural interface formations. However, the creation and management of artificial cavities creates a complicated interaction of gas and liquid that makes optical sensing and communication through the interface challenging. A ventilated cavity can reduce friction in underwater vehicles, but the resulting bubble drastically impedes optical and acoustic communication propagation. The complicated interaction at the air/water boundary yields surface waves and turbulence that make modeling and compensating of the optical properties difficult. Our experimental approach uses a narrow laser beam to probe the surface of the interface and measure the beam deflection and lensing effects. Using a vehicle model with a cavitator in a water tunnel, a laser beam is propagated outward from the model through the boundary and projected onto a target grid. The beam projection is captured using a high-speed camera, allowing us to measure and analyze beam shape and deflection. This approach has enabled us to quantify the temporal and spatial periodic variations in the beam propagation through the cavity boundary and fluid.

Incidence and mechanism of neurological deficit after thoracolumbar fractures sustained in motor vehicle collisions.

PubMed

Mukherjee, Sourabh; Beck, Chad; Yoganandan, Narayan; Rao, Raj D

2015-10-09

OBJECT To determine the incidence of and assess the risk factors associated with neurological injury in motor vehicle occupants who sustain fractures of the thoracolumbar spine. METHODS In this study, the authors queried medical, vehicle, and crash data elements from the Crash Injury Research and Engineering Network (CIREN), a prospectively gathered multicenter database compiled from Level I trauma centers. Subjects had fractures involving the T1-L5 vertebral segments, an Abbreviated Injury Scale (AIS) score of ≥ 3, or injury to 2 body regions with an AIS score of ≥ 2 in each region. Demographic parameters obtained for all subjects included age, sex, height, body weight, and body mass index. Clinical parameters obtained included the level of the injured vertebra and the level and type of spinal cord injury. Vehicular crash data included vehicle make, seatbelt type, and usage and appropriate use of the seatbelt. Crash data parameters included the principal direction of force, change in velocity on impact (ΔV), airbag deployment, and vehicle rollover. The authors performed a univariate analysis of the incidence and the odds of sustaining spinal neurological injury associated with major thoracolumbar fractures with respect to the demographic, clinical, and crash parameters. RESULTS Neurological deficit associated with thoracolumbar fracture was most frequent at extremes of age; the highest rates were in the 0- to 10-year (26.7% [4 of 15]) and 70- to 80-year (18.4% [7 of 38]) age groups. Underweight occupants (OR 3.52 [CI 1.055-11.7]) and obese occupants (OR 3.27 [CI 1.28-8.31]) both had higher odds of sustaining spinal cord injury than occupants with a normal body mass index. The highest risk of neurological injury existed in crashes in which airbags deployed and the occupant was not restrained by a seatbelt (OR 2.35 [CI 0.087-1.62]). Reduction in the risk of neurological injuries occurred when 3-point seatbelts were used correctly in conjunction with the

The DaveMLTranslator: An Interface for DAVE-ML Aerodynamic Models

NASA Technical Reports Server (NTRS)

Hill, Melissa A.; Jackson, E. Bruce

2007-01-01

It can take weeks or months to incorporate a new aerodynamic model into a vehicle simulation and validate the performance of the model. The Dynamic Aerospace Vehicle Exchange Markup Language (DAVE-ML) has been proposed as a means to reduce the time required to accomplish this task by defining a standard format for typical components of a flight dynamic model. The purpose of this paper is to describe an object-oriented C++ implementation of a class that interfaces a vehicle subsystem model specified in DAVE-ML and a vehicle simulation. Using the DaveMLTranslator class, aerodynamic or other subsystem models can be automatically imported and verified at run-time, significantly reducing the elapsed time between receipt of a DAVE-ML model and its integration into a simulation environment. The translator performs variable initializations, data table lookups, and mathematical calculations for the aerodynamic build-up, and executes any embedded static check-cases for verification. The implementation is efficient, enabling real-time execution. Simple interface code for the model inputs and outputs is the only requirement to integrate the DaveMLTranslator as a vehicle aerodynamic model. The translator makes use of existing table-lookup utilities from the Langley Standard Real-Time Simulation in C++ (LaSRS++). The design and operation of the translator class is described and comparisons with existing, conventional, C++ aerodynamic models of the same vehicle are given.

The effects of wheelchair-seating stiffness and energy absorption on occupant frontal impact kinematics and submarining risk using computer simulation.

PubMed

Bertocci, Gina; Souza, Aaron L; Szobota, Stephanie

2003-01-01

Many wheelchair users must travel in motor vehicles while seated in their wheelchairs. The safety features of seat assemblies are key to motor vehicle occupant crash protection. Seating system properties such as strength, stiffness, and energy absorbance have been shown to have significant influence on risk of submarining. This study investigated the effects of wheelchair seat stiffness and energy absorption properties on occupant risk of submarining during a frontal motor vehicle 20 g/30 mph impact using a validated computer crash simulation model. The results indicate that wheelchair-seating stiffness and energy absorption characteristics influence occupant kinematics associated with the risk of submarining. Softer seat surfaces and relatively high energy absorption/permanent deformation were found to produce pelvis excursion trajectories associated with increased submarining risk. Findings also suggest that the current American National Standards Institute/Rehabilitation Engineering and Assistive Technology Society of North America (ANSI/RESNA) WC-19 seating integrity may not adequately assess submarining risk.

A study of speech interfaces for the vehicle environment.

DOT National Transportation Integrated Search

2013-05-01

Over the past few years, there has been a shift in automotive human machine interfaces from : visual-manual interactions (pushing buttons and rotating knobs) to speech interaction. In terms of : distraction, the industry views speech interaction as a...

Motor vehicle seat belt restraint system analysis during rollover.

PubMed

Meyer, Steven E; Hock, Davis; Forrest, Stephen; Herbst, Brian; Sances, Anthony; Kumaresan, Srirangam

2003-01-01

The multi-planar and multiple impact long duration accident sequence of a real world rollover results in multidirectional vehicle acceleration pulses and multiplanar occupant motions not typically seen in a planar crash sequence. Various researchers have documented that, while contemporary production emergency locking seatbelt retractors (ELRs) have been found to be extremely effective in the planar crashes in which they are extensively evaluated, when subjected to multi-planar acceleration environments their response may be different than expected. Specifically, accelerations in the vertical plane have been shown to substantially affect the timeliness of the retractors inertial sensor moving out of its neutral position and locking the seat belt. An analysis of the vehicle occupant motions relative to the acceleration pulses sensed at the retractor location indicates a time phase shift that, under certain circumstances, can result in unexpected seat belt spool out and occupant excursions in these multi-planar, multiple impact crash sequences. This paper will review the various previous studies focusing on the retractors response to these multidirectional, including vertical, acceleration environments and review statistical studies based upon U.S. government collected data indicating a significant difference in belt usage rates in rollover accidents as compared to all other planar accident modes. A significant number of real world accident case studies will be reviewed wherein the performance of ELR equipped seatbelt systems spooled out. Finally, the typical occupant injury and the associated mechanism due to belt spool out in real world accidents will be delineated.

Research safety vehicle program (Phase II) specification review. Volume II. Final technical report, Jul 1975--Nov 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pugliese, S.M.

1977-02-01

In Phase I of the Research Safety Vehicle Program (RSV), preliminary design and performance specifications were developed for a mid-1980's vehicle that integrates crashworthiness and occupant safety features with material resource conservation, economy, and producibility. Phase II of the program focused on development of the total vehicle design via systems engineering and integration analyses. As part of this effort, it was necessary to continuously review the Phase I recommended performance specification in relation to ongoing design/test activities. This document contains the results of analyses of the Phase I specifications. The RSV is expected to satisfy all of the producibility andmore » safety related specifications, i.e., handling and stability systems, crashworthiness, occupant protection, pedestrian/cyclist protection, etc.« less

Estimated injury risk for specific injuries and body regions in frontal motor vehicle crashes.

PubMed

Weaver, Ashley A; Talton, Jennifer W; Barnard, Ryan T; Schoell, Samantha L; Swett, Katrina R; Stitzel, Joel D

2015-01-01

Injury risk curves estimate motor vehicle crash (MVC) occupant injury risk from vehicle, crash, and/or occupant factors. Many vehicles are equipped with event data recorders (EDRs) that collect data including the crash speed and restraint status during a MVC. This study's goal was to use regulation-required data elements for EDRs to compute occupant injury risk for (1) specific injuries and (2) specific body regions in frontal MVCs from weighted NASS-CDS data. Logistic regression analysis of NASS-CDS single-impact frontal MVCs involving front seat occupants with frontal airbag deployment was used to produce 23 risk curves for specific injuries and 17 risk curves for Abbreviated Injury Scale (AIS) 2+ to 5+ body region injuries. Risk curves were produced for the following body regions: head and thorax (AIS 2+, 3+, 4+, 5+), face (AIS 2+), abdomen, spine, upper extremity, and lower extremity (AIS 2+, 3+). Injury risk with 95% confidence intervals was estimated for 15-105 km/h longitudinal delta-Vs and belt status was adjusted for as a covariate. Overall, belted occupants had lower estimated risks compared to unbelted occupants and the risk of injury increased as longitudinal delta-V increased. Belt status was a significant predictor for 13 specific injuries and all body region injuries with the exception of AIS 2+ and 3+ spine injuries. Specific injuries and body region injuries that occurred more frequently in NASS-CDS also tended to carry higher risks when evaluated at a 56 km/h longitudinal delta-V. In the belted population, injury risks that ranked in the top 33% included 4 upper extremity fractures (ulna, radius, clavicle, carpus/metacarpus), 2 lower extremity fractures (fibula, metatarsal/tarsal), and a knee sprain (2.4-4.6% risk). Unbelted injury risks ranked in the top 33% included 4 lower extremity fractures (femur, fibula, metatarsal/tarsal, patella), 2 head injuries with less than one hour or unspecified prior unconsciousness, and a lung contusion (4

Land Vehicle Navigation ? A Worldwide Perspective

NASA Astrophysics Data System (ADS)

French, Robert L.

This paper was presented at the NAV '90 conference and was first published in the Journal in 1991 (Vol. 44, p. 25). It is followed by comments from Christopher Querée.The future shakeout and consolidation of vehicle navigation technologies and systems approaches will occur primarily in the vehicle location, mobile data communications, and man/machine interface areas. Digital maps will not be directly affected because, although there is still a dearth of formal standards, there is already a high degree of uniformity among approaches being pursued in all parts of the world.

Comparison of three control methods for an autonomous vehicle

NASA Astrophysics Data System (ADS)

Deshpande, Anup; Mathur, Kovid; Hall, Ernest

2010-01-01

The desirability and challenge of developing a completely autonomous vehicle and the rising need for more efficient use of energy by automobiles motivate this research- a study for an optimum solution to computer control of energy efficient vehicles. The purpose of this paper is to compare three control methods - mechanical, hydraulic and electric that have been used to convert an experimental all terrain vehicle to drive by wire which would eventually act as a test bed for conducting research on various technologies for autonomous operation. Computer control of basic operations in a vehicle namely steering, braking and speed control have been implemented and will be described in this paper. The output from a 3 axis motion controller is used for this purpose. The motion controller is interfaced with a software program using WSDK (Windows Servo Design Kit) as an intermediate tuning layer for tuning and parameter settings in autonomous operation. The software program is developed in C++. The voltage signal sent to the motion controller can be varied through the control program for desired results in controlling the steering motor, activating the hydraulic brakes and varying the vehicle's speed. The vehicle has been tested for its basic functionality which includes testing of street legal operations and also a 1000 mile test while running in a hybrid mode. The vehicle has also been tested for control when it is interfaced with devices such as a keyboard, joystick and sensors under full autonomous operation. The vehicle is currently being tested in various safety studies and is being used as a test bed for experiments in control courses and research studies. The significance of this research is in providing a greater understanding of conventional driving controls and the possibility of improving automobile safety by removing human error in control of a motor vehicle.

Tire/runway friction interface

NASA Technical Reports Server (NTRS)

Yager, Thomas J.

1990-01-01

An overview is given of NASA Langley's tire/runway pavement interface studies. The National Tire Modeling Program, evaluation of new tire and landing gear designs, tire wear and friction tests, and tire hydroplaning studies are examined. The Aircraft Landing Dynamics Facility is described along with some ground friction measuring vehicles. The major goals and scope of several joint FAA/NASA programs are identified together with current status and plans.

An Index For Rating the Total Secondary Safety of Vehicles from Real World Crash Data

PubMed Central

Newstead, S.; Watson, L.; Cameron, M.

2007-01-01

This study proposes a total secondary safety index for light passenger vehicles that rates the relative performance of vehicles in protecting both their own occupants and other road users in the full range of real world crash circumstances. The index estimates the risk of death or serious injury to key road users in crashes involving light passenger vehicles across the full range of crash types. The proposed index has been estimated from real world crash data from Australasia and was able to identify vehicles that have superior or inferior total secondary safety characteristics compared with the average vehicle. PMID:18184497

Occupational Contact Dermatitis in Mechanics and Repairers Referred for Patch Testing: Retrospective Analysis From the North American Contact Dermatitis Group 1998-2014.

PubMed

Warshaw, Erin M; Hagen, Solveig L; Sasseville, Denis; Maibach, Howard I; DeKoven, Joel G; Belsito, Donald V; Fowler, Joseph F; Zug, Kathryn A; Taylor, James S; Mathias, C G Toby; Fransway, Anthony F; DeLeo, Vincent A; Marks, James G; Pratt, Melanie D; Zirwas, Matthew J; Storrs, Frances J

Contact dermatoses are common in mechanic and repair occupations. This study aimed to (1) estimate the prevalence of occupationally related contact dermatitis among mechanics/repairers patch tested from 1998 to 2014 by the North American Contact Dermatitis Group, (2) characterize responsible allergens and irritants, and their sources, and (3) compare results among 3 occupational subgroups (mechanics, electrical/electronic, and other). A cross-sectional analysis of patients patch tested by the North American Contact Dermatitis Group between 1998 and 2014. Of 38,784 patients patch tested, 691 (1.8%) were mechanics/repairers. Male sex (93.5%) and hand involvement (59.5%) were common overall. Occupationally related skin disease was more prevalent among vehicle and mobile equipment mechanics/repairers (52.7%) and other mechanics/repairers (41.4%) than electrical/electronic equipment mechanics/repairers (21.3%). Overall, carba mix, thiuram mix, and methylchloroisothiazolone/methylisothiazolone were the most common occupation-related clinically relevant allergens. Gloves, automotive vehicles, solvents, oils, lubricants, and fuels were the most common sources of responsible allergens. Common occupationally related allergens included rubber accelerators and the preservative methylchloroisothiazolone/methylisothiazolone.

Carbon monoxide exposure from aircraft fueling vehicles.

PubMed

McCammon, C S; Halperin, W F; Lemen, R A

1981-01-01

Investigators from the National Institute for Occupational Safety and Health observed deficiencies in maintenance of fueling trucks at an international airport. The exhaust system is vented under the front bumper, a standard design on fueling trucks which is intended to minimize the proximity of the exhaust system to the jet fuel in the vehicles. Carbon monoxide levels were measured in the cabs of 17 fueling trucks with windows closed, heaters on, and in different positions relative to the wind. One truck had an average CO level of 300 ppm, two exceeded 100 ppm, five others exceeded 50 ppm, while levels in the other nine averaged less than or equal to 500 ppm. Levels of CO depended on the mechanical condition of the vehicle and the vehicle's orientation to the wind. Stringent maintenance is required as the exhaust design is not fail-safe.

Potential of a precrash lateral occupant movement in side collisions of (electric) minicars.

PubMed

Hierlinger, T; Lienkamp, M; Unger, J; Unselt, T

2015-01-01

In minicars, the survival space between the side structure and occupant is smaller than in conventional cars. This is an issue in side collisions. Therefore, in this article a solution is studied in which a lateral seat movement is imposed in the precrash phase. It generates a pre-acceleration and an initial velocity of the occupant, thus reducing the loads due to the side impact. The assessment of the potential is done by numerical simulations and a full-vehicle crash test. The optimal parameters of the restraint system including the precrash movement, time-to-fire of head and side airbag, etc., are found using metamodel-based optimization methods by minimizing occupant loads according to European New Car Assessment Programme (Euro NCAP). The metamodel-based optimization approach is able to tune the restraint system parameters. The numerical simulations show a significant averaged reduction of 22.3% in occupant loads. The results show that the lateral precrash occupant movement offers better occupant protection in side collisions.

Deriving and Validating a Road Safety Performance Indicator for Vehicle Fleet Passive Safety

PubMed Central

Page, Marianne; Rackliff, Lucy

2006-01-01

Road safety performance indicators (RSPI) are policy tools which describe the extent of insecure operational safety conditions within traffic systems. This study describes the production of an RSPI which represents the presence within a country’s vehicle fleet, of vehicles that may not effectively protect an occupant in a collision. This work is highly original, as it uses the entire vehicle database of European Union Member States in order to estimate the average level of passive safety offered by the entire fleet in each country. The EuroNCAP safety ratings and vehicle age of each vehicle in each fleet have been obtained to calculate the RSPI. The methodology used could be adopted as an international standard. PMID:16968645

Nonlinear analysis of collapse mechanism in superstructure vehicle

NASA Astrophysics Data System (ADS)

Nor, M. K. Mohd; Ho, C. S.; Ma'at, N.

2017-04-01

The EU directive 2001/85/EC is an official European text which describes the specifications for "single deck class II and III vehicles" required to be approved by the regulation UN/ECE no.66 (R66). To prevent the catastrophic consequences by occupant during an accident, the Malaysian government has reinforced the same regulation upon superstructure construction. This paper discusses collapse mechanism analysis of a superstructure vehicle using a Crash D nonlinear analysis computer program based on this regulation. The analysis starts by hand calculation to define the required energy absorption by the chosen structure. Simple calculations were then performed to define the weakest collapse mechanism after undesirable collapse modes are eliminated. There are few factors highlighted in this work to pass the regulation. Using the selected cross section, Crash D simulation showed a good result. Generally, the deformation is linearly correlates to the energy absorption for the structure with low stiffness. Failure of critical members such as vertical lower side wall must be avoided to sustain safety of the passenger compartment and prevent from severe and fatal injuries to the trapped occupant.

The relative importance of whole body vibration and occupational lifting as risk factors for low-back pain

PubMed Central

Palmer, K; Griffin, M; Syddall, H; Pannett, B; Cooper, C; Coggon, D

2003-01-01

Aims: To explore the impact of occupational exposure to whole body vibration (WBV) on low back pain (LBP) in the general population and to estimate the burden of LBP attributable to occupational WBV in comparison with that due to occupational lifting. Methods: A questionnaire including sections on WBV at work, LBP, and potential risk factors was mailed to a community sample of 22 194 men and women of working age. Sources and durations of exposure to occupational WBV were ascertained for the past week and personal vibration doses (eVDV) were estimated. Analysis was confined to subjects reporting exposures in the past week as typical of their work. Associations of LBP with eVDV, driving industrial vehicles, and occupational lifting were explored by logistic regression and attributable numbers were calculated. Results: Significant associations were found between daily lifting of weights greater than 10 kg at work and LBP, troublesome LBP (which made it difficult to put on hosiery), and sciatica (prevalence ratios 1.3 to 1.7); but the risk of these outcomes in both sexes varied little by eVDV and only weak associations were found with riding on industrial vehicles. Assuming causal associations, the numbers of cases of LBP in Britain attributable to occupational WBV were estimated to be 444 000 in men and 95 000 in women. This compared with an estimated 940 000 male cases and 370 000 female cases of LBP from occupational lifting. Conclusions: The burden of LBP in Britain from occupational exposure to WBV is smaller than that attributable to lifting at work. PMID:14504358

49 CFR 571.208 - Standard No. 208; Occupant crash protection.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., and buses. In addition, S9, Pressure vessels and explosive devices, applies to vessels designed to... as part of a system designed to provide protection to occupants in the event of a crash. (b... seat and the near side of the vehicle and is designed to allow access to more rearward seating...

49 CFR 571.208 - Standard No. 208; Occupant crash protection.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., and buses. In addition, S9, Pressure vessels and explosive devices, applies to vessels designed to... as part of a system designed to provide protection to occupants in the event of a crash. (b... seat and the near side of the vehicle and is designed to allow access to more rearward seating...

Occupational injury deaths of 16- and 17-year-olds in the United States.

PubMed Central

Castillo, D N; Landen, D D; Layne, L A

1994-01-01

Data from the National Traumatic Occupational Fatalities surveillance system were used to analyze occupational injury deaths of civilian 16- and 17-year-olds during 1980 through 1989. There were 670 deaths; the rate was 5.11 per 100,000 full-time equivalent workers. The leading causes of death were incidents involving motor vehicles and machines, electrocution, and homicide. Workers 16 and 17 years old appear to be at greater risk than adults for occupational death by electrocution, suffocation, drowning, poisoning, and natural and environmental factors. Improved enforcement of and compliance with federal child labor laws, evaluation of the appropriateness of currently permitted activities, and education are encouraged. PMID:7755674

Occupational Carbon Monoxide Fatalities in the US From Unintentional Non-Fire Related Exposures, 1992–2008

PubMed Central

Henn, Scott A.; Bell, Jennifer L.; Sussell, Aaron L.; Konda, Srinivas

2015-01-01

Objective To analyze characteristics of, and trends in, work-related carbon monoxide (CO) fatalities in the US. Methods Records of unintentional, non-fire related fatalities from CO exposure were extracted from the Bureau of Labor Statistics’ Census of Fatal Occupational Injuries and the Occupational Safety and Health Administration’s Integrated Management Information System for years 1992–2008 and analyzed separately. Results The average number of annual CO fatalities was 22 (standard deviation = 8). Fatality rates were highest among workers aged ≥65, males, Hispanics, winter months, the Midwest, and the Fishing, Hunting, and Trapping industry subsector. Self-employed workers accounted for 28% of all fatalities. Motor vehicles were the most frequent source of fatal CO exposure, followed by heating systems and generators. Conclusions CO has been the most frequent cause of occupational fatality due to acute inhalation, and has shown no significant decreasing trend since 1992. The high number of fatalities from motor vehicles warrants further investigation. PMID:23868822

Comparative Analysis of Results from Three Recent Non-Separated Concurrent-Flow High Occupancy Freeway Lane Projects : Boston, Santa Monica and Miami

DOT National Transportation Integrated Search

1978-06-01

In order to move more people in fewer vehicles with limited capital investment, priorities for High Occupancy Vehicles (HOV) have been developed and implemented over the past several years. This study focuses on one of the options of HOV: non-separat...

Spinal injury in car crashes: crash factors and the effects of occupant age.

PubMed

Bilston, Lynne E; Clarke, Elizabeth C; Brown, Julie

2011-08-01

Motor vehicle crashes are the leading cause of serious spinal injury in most developed nations. However, since these injuries are rare, systematic analyses of the crash factors that are predictive of spinal injury have rarely been performed. This study aimed to use a population-reference crash sample to identify crash factors associated with moderate to severe spinal injury, and how these vary with occupant age. The US National Automotive Sampling System Crashworthiness Data System (NASS) data for 1993-2007 were analysed using logistic regression to identify crash factors associated with Abbreviated Injury Scale (AIS)2+ spinal injury among restrained vehicle passengers. Risk of moderate or severe spinal injury (AIS2+) was associated with higher severity crashes (OR=3.5 (95% CI 2.6 to 4.6)), intrusion into an occupant's seating position (OR=2.7 (95% CI 1.9 to 3.7)), striking a fixed object rather than another car (OR=1.7 (95% CI 1.3 to 2.1)), and use of a shoulder-only belt (OR=2.7 (95% CI 1.5 to 4.8)). Older occupants (65 years or older) were at higher risk of spinal injury than younger adults in frontal, side and rollover crashes. Children under 16 were at a lower risk of spinal injury than adults in all crash types except frontal crashes. While the risk of serious spinal injury in motor vehicle crashes is low, these injuries are more common in crashes of higher severity or into fixed objects, and in the presence of intrusion. There are elevated risks of spinal injury for older occupants compared with younger adults, which may reflect changes in biomechanical tolerances with age. Children appear to be at lower risk of serious spinal injury than adults except in frontal crashes.

Rib and sternum fractures in the elderly and extreme elderly following motor vehicle crashes.

PubMed

Bansal, Vishal; Conroy, Carol; Chang, David; Tominaga, Gail T; Coimbra, Raul

2011-05-01

As the population ages, the need to protect the elderly during motor vehicle crashes becomes increasingly critical. This study focuses on causation of elderly rib and sternum fractures in seriously injured elderly occupants involved in motor vehicle crashes. We used data from the Crash Injury Research and Engineering Network (CIREN) database (1997-2009). Study case criteria included occupant (≥ 65 years old) drivers (sitting in the left outboard position of the first row) or passengers (sitting in the first row right outboard position) who were in frontal or side impacts. To avoid selection bias, only occupants with a Maximum Abbreviated Injury Scale (MAIS) 3 (serious) or greater severity injury were included in this study. Odds ratios were used as a descriptive measure of the strength of association between variables and Chi square tests were used to determine if there was a statistically significant relationship between categorical variables. Of the 211 elderly (65-79 years old) occupants with thoracic injury, 92.0% had rib fractures and 19.6% had sternum fractures. For the 76 extreme elderly (80 years or older) with thoracic injury, 90.4% had rib fractures and 27.7% had sternum fractures. Except for greater mortality and more rib fractures caused by safety belts, there were no differences between the extreme elderly and the elderly occupants. Current safety systems may need to be redesigned to prevent rib and sternum fractures in occupants 80 years and older. Copyright © 2010 Elsevier Ltd. All rights reserved.

Launch Vehicle Selection and the Implementation of the Soil Moisture Active Passive Mission

NASA Technical Reports Server (NTRS)

Sherman, Sarah; Waydo, Peter; Eremenko, Alexander

2016-01-01

Soil Moisture Active Passive (SMAP) is a NASA-developed Earth science satellite currently mapping the soil moisture content and freeze/thaw state of Earth's land mass from a 685km, near-polar, sun-synchronous orbit. It was launched on January 31, 2015 from Vandenberg AFB upon a Delta II 7320 launch vehicle. Due to external considerations, SMAP's launch vehicle selection remained an open item until Project Critical Design Review (CDR). Thus, certain key aspects of the spacecraft design had to accommodate a diverse range of candidate launch vehicle environments, performance envelopes, interfaces and operational scenarios. Engineering challenges stemmed from two distinct scenarios: decisions that had to be made prior to launch vehicle selection to accommodate all possible outcomes, and post-selection changes constrained by schedule and the existing spacecraft configuration. The effects of the timing of launch vehicle selection reached virtually every aspect of the Observatory's design and development. Physical environments, mass allocations, material selections, propulsion system performance, dynamic response, launch phase and mission planning, overall size and configuration, and of course all interfaces to the launch vehicle were heavily dependent on this outcome. This paper will discuss the resolution of these technical challenges.

Potential Occupant Injury Reduction in Pre-Crash System Equipped Vehicles in the Striking Vehicle of Rear-end Crashes

PubMed Central

Kusano, Kristofer D.; Gabler, Hampton C.

2010-01-01

To mitigate the severity of rear-end and other collisions, Pre-Crash Systems (PCS) are being developed. These active safety systems utilize radar and/or video cameras to determine when a frontal crash, such as a front-to-back rear-end collisions, is imminent and can brake autonomously, even with no driver input. Of these PCS features, the effects of autonomous pre-crash braking are estimated. To estimate the maximum potential for injury reduction due to autonomous pre-crash braking in the striking vehicle of rear-end crashes, a methodology is presented for determining 1) the reduction in vehicle crash change in velocity (ΔV) due to PCS braking and 2) the number of injuries that could be prevented due to the reduction in collision severity. Injury reduction was only performed for belted drivers, as unbelted drivers have an unknown risk of being thrown out of position. The study was based on 1,406 rear-end striking vehicles from NASS / CDS years 1993 to 2008. PCS parameters were selected from realistic values and varied to examine the effect on system performance. PCS braking authority was varied from 0.5 G’s to 0.8 G’s while time to collision (TTC) was held at 0.45 seconds. TTC was then varied from 0.3 second to 0.6 seconds while braking authority was held constant at 0.6 G’s. A constant braking pulse (step function) and ramp-up braking pulse were used. The study found that automated PCS braking could reduce the crash ΔV in rear-end striking vehicles by an average of 12% – 50% and avoid 0% – 14% of collisions, depending on PCS parameters. Autonomous PCS braking could potentially reduce the number of injured drivers who are belted by 19% to 57%. PMID:21050603

Potential Occupant Injury Reduction in Pre-Crash System Equipped Vehicles in the Striking Vehicle of Rear-end Crashes.

PubMed

Kusano, Kristofer D; Gabler, Hampton C

2010-01-01

To mitigate the severity of rear-end and other collisions, Pre-Crash Systems (PCS) are being developed. These active safety systems utilize radar and/or video cameras to determine when a frontal crash, such as a front-to-back rear-end collisions, is imminent and can brake autonomously, even with no driver input. Of these PCS features, the effects of autonomous pre-crash braking are estimated. To estimate the maximum potential for injury reduction due to autonomous pre-crash braking in the striking vehicle of rear-end crashes, a methodology is presented for determining 1) the reduction in vehicle crash change in velocity (ΔV) due to PCS braking and 2) the number of injuries that could be prevented due to the reduction in collision severity. Injury reduction was only performed for belted drivers, as unbelted drivers have an unknown risk of being thrown out of position. The study was based on 1,406 rear-end striking vehicles from NASS / CDS years 1993 to 2008. PCS parameters were selected from realistic values and varied to examine the effect on system performance. PCS braking authority was varied from 0.5 G's to 0.8 G's while time to collision (TTC) was held at 0.45 seconds. TTC was then varied from 0.3 second to 0.6 seconds while braking authority was held constant at 0.6 G's. A constant braking pulse (step function) and ramp-up braking pulse were used. The study found that automated PCS braking could reduce the crash ΔV in rear-end striking vehicles by an average of 12% - 50% and avoid 0% - 14% of collisions, depending on PCS parameters. Autonomous PCS braking could potentially reduce the number of injured drivers who are belted by 19% to 57%.

Human-Vehicle Interface for Semi-Autonomous Operation of Uninhabited Aero Vehicles

NASA Technical Reports Server (NTRS)

Jones, Henry L.; Frew, Eric W.; Woodley, Bruce R.; Rock, Stephen M.

2001-01-01

The robustness of autonomous robotic systems to unanticipated circumstances is typically insufficient for use in the field. The many skills of human user often fill this gap in robotic capability. To incorporate the human into the system, a useful interaction between man and machine must exist. This interaction should enable useful communication to be exchanged in a natural way between human and robot on a variety of levels. This report describes the current human-robot interaction for the Stanford HUMMINGBIRD autonomous helicopter. In particular, the report discusses the elements of the system that enable multiple levels of communication. An intelligent system agent manages the different inputs given to the helicopter. An advanced user interface gives the user and helicopter a method for exchanging useful information. Using this human-robot interaction, the HUMMINGBIRD has carried out various autonomous search, tracking, and retrieval missions.

Occupational Noise Exposure among Toll Tellers at Toll Plaza in Malaysia

NASA Astrophysics Data System (ADS)

Azmi, Sharifah Nadya Syed; Dawal, Siti Zawiah Md; Ya, Tuan Mohammad Yusoff Shah Tuan; Saidin, Hamidi

2010-10-01

Toll tellers working at toll plaza have potential of exposure to high noise from the vehicles especially for the peak level of sound emitted by the heavy vehicles. However, occupational exposures in this workplace have not been adequately characterized and identified. Occupational noise exposure among toll tellers at toll plaza was assessed using Sound Level Meter, Noise Dosimeter and through questionnaire survey. These data were combined to estimate the work shift exposure level and health impacts to the toll tellers by using statistical analysis. Noise Dosimeter microphone was located at the hearing zone of the toll teller which working inside the toll booth and full-period measurements were collected for each work shift. The measurements were taken at 20 toll booths from 6.00 am to 2.00 pm for 5 days. 71 respondents participated in the survey to identify the symptoms of noise induced hearing loss and other health related problems among toll tellers. Results of this study indicated that occupational noise exposure among toll tellers for Mean Continuous Equivalent Level, Leq was 79.2±1.4 dB(A), Mean Maximum Level, Lmax was 107.8±3.6 dB(A) and Mean Peak Level, Lpeak was 136.6±9.9 dB. The Peak Level reported statistically significantly at 140 dB, the level of TLV recommended by ACGIH. The research findings indicated that the primary risk exposure to toll tellers comes from noise that emitted from heavy vehicles. Most of the toll tellers show symptoms of noise induced hearing loss and annoyed by the sources of noise at the toll plaza.

Occupational exposure to electromagnetic fields in the Polish Armed Forces.

PubMed

Sobiech, Jaromir; Kieliszek, Jarosław; Puta, Robert; Bartczak, Dagmara; Stankiewicz, Wanda

2017-06-19

Standard devices used by military personnel that may pose electromagnetic hazard include: radars, missile systems, radio navigation systems and radio transceivers. The aim of this study has been to evaluate the exposure of military personnel to electromagnetic fields. Occupational exposure to electromagnetic fields was analyzed in the work environment of personnel of 204 devices divided into 5 groups (surface-to-air missile system radars, aircraft and helicopters, communication devices, surveillance and height finder radars, airport radars and radio navigation systems). Measurements were carried out at indicators, device terminals, radio panels, above vehicle seats, in vehicle hatches, by cabinets containing high power vacuum tubes and other transmitter components, by transmission lines, connectors, etc. Portable radios emit the electric field strength between 20-80 V/m close to a human head. The manpack radio operator's exposure is 60-120 V/m. Inside vehicles with high frequency/very high frequency (HF/VHF) band radios, the electric field strength is between 7-30 V/m and inside the radar cabin it ranges between 9-20 V/m. Most of the personnel on ships are not exposed to the electromagnetic field from their own radar systems but rather by accidental exposure from the radar systems of other ships. Operators of surface-to-air missile systems are exposed to the electric field strength between 7-15 V/m and the personnel of non-directional radio beacons - 100-150 V/m. In 57% of military devices Polish soldiers work in the occupational protection zones. In 35% of cases, soldiers work in intermediate and hazardous zones and in 22% - only in the intermediate zone. In 43% of devices, military personnel are not exposed to electromagnetic field. Int J Occup Med Environ Health 2017;30(4):565-577. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Effects of vehicle front-end stiffness on rear seat dummies in NCAP and FMVSS208 tests.

PubMed

Sahraei, Elham; Digges, Kennerly; Marzougui, Dhafer

2013-01-01

This study is devoted to quantifying changes in mass and stiffness of vehicles tested by the National Highway Traffic Safety Administration (NHTSA) over the past 3 decades (model years 1982 to 2010) and understanding the effect of those changes on protection of rear seat occupants. A total of 1179 tests were used, and the changes in their mass and stiffness versus their model year was quantified. Additionally, data from 439 dummies tested in rear seats of NHTSA's full frontal crashes were analyzed. Dummies were divided into 3 groups based on their reference injury criteria. Multiple regressions were performed with speed, stiffness, and mass as predicting variables for head, neck, and chest injury criteria. A significant increase in mass and stiffness over model year of vehicles was observed, for passenger cars as well as large platform vehicles. The result showed a significant correlation (P-value < .05) between the increase in stiffness of the vehicles and increase in head and chest injury criteria for all dummy sizes. These results explain that stiffness is a significant contributor to previously reported decreases in protection of rear seat occupants over model years of vehicles.

Occupational driving as a risk factor for low back pain in active-duty military service members.

PubMed

Knox, Jeffrey B; Orchowski, Joseph R; Scher, Danielle L; Owens, Brett D; Burks, Robert; Belmont, Philip J

2014-04-01

Although occupational driving has been associated with low back pain, little has been reported on the incidence rates for this disorder. To determine the incidence rate and demographic risk factors of low back pain in an ethnically diverse and physically active population of US military vehicle operators. Retrospective database analysis. All active-duty military service members between 1998 and 2006. Low back pain requiring visit to a health-care provider. A query was performed using the US Defense Medical Epidemiology Database for the International Classification of Diseases, Ninth Revision, Clinical Modification code for low back pain (724.20). Multivariate Poisson regression analysis was used to estimate the rate of low back pain among military vehicle operators and control subjects per 1,000 person-years, while controlling for sex, race, rank, service, age, and marital status. A total of 8,447,167 person-years of data were investigated. The overall unadjusted low back pain incidence rate for military members whose occupation is vehicle operator was 54.2 per 1,000 person-years. Compared with service members with other occupations, motor vehicle operators had a significantly increased adjusted incidence rate ratio (IRR) for low back pain of 1.15 (95% confidence interval [CI] 1.13-1.17). Female motor vehicle operators, compared with males, had a significantly increased adjusted IRR for low back pain of 1.45 (95% CI 1.39-1.52). With senior enlisted as the referent category, the junior enlisted rank group of motor vehicle operators had a significantly increased adjusted IRR for low back pain: 1.60 (95% CI 1.52-1.70). Compared with Marine service members, those motor vehicle operators in both the Army, 2.74 (95% CI 2.60-2.89), and the Air Force, 1.98 (95% CI 1.84-2.14), had a significantly increased adjusted IRR for low back pain. The adjusted IRRs for the less than 20-year and more than 40-year age groups, compared with the 30- to 39-year age group, were 1.24 (1

A high speed telemetry data link for an autonomous roving vehicle

NASA Technical Reports Server (NTRS)

Cipolle, D. J.

1980-01-01

A data link system used on a prototype autonomous roving vehicle is described. This system provides a means of acquiring, formatting, and transmitting information on board the vehicle to a controlling computer. Included is a statement of requirements and the design philosophy. Additionally, interfacing with the rover systems is discussed, along with the overall performance of the telemetry link.

Instrument interface description for NOAA 2000 instruments with European morning spacecraft and/or NOAA-OPQ spacecraft

NASA Technical Reports Server (NTRS)

1993-01-01

The purpose is to describe at a high level the common interface provisions and constraints placed on the NOAA-2000 instruments and the interfacing spacecraft elements in the following areas: electrical interface, mechanical interface, thermal interface, magnetic interface, electromagnetic compatibility, structural/mechanical environmental interface, contamination control, and the ionizing radiation environment. The requirements reflect the fact that these instruments must be compatible with a number of different polar orbiting satellite vehicles including the NOAA-OPQ satellites and the EUMETSAT METOP satellites.

Interpretation of Urinary and Blood Benzene biomarkers of Exposure for Non-Occupationally Exposed Individuals

EPA Science Inventory

Non-occupational exposure to benzene occurs primarily through inhalation ofair impacted by motor vehicle exhaust, fuel sources, and cigarette smoke. This study relates published measurements ofbenzene biomarkers to air exposure concentrations. Benzene has three reliable biomar...

Operator Performance Evaluation of Fault Management Interfaces for Next-Generation Spacecraft

NASA Technical Reports Server (NTRS)

Hayashi, Miwa; Ravinder, Ujwala; Beutter, Brent; McCann, Robert S.; Spirkovska, Lilly; Renema, Fritz

2008-01-01

In the cockpit of the NASA's next generation of spacecraft, most of vehicle commanding will be carried out via electronic interfaces instead of hard cockpit switches. Checklists will be also displayed and completed on electronic procedure viewers rather than from paper. Transitioning to electronic cockpit interfaces opens up opportunities for more automated assistance, including automated root-cause diagnosis capability. The paper reports an empirical study evaluating two potential concepts for fault management interfaces incorporating two different levels of automation. The operator performance benefits produced by automation were assessed. Also, some design recommendations for spacecraft fault management interfaces are discussed.

49 CFR 571.205(a) - Glazing equipment manufactured before September 1, 2006 and glazing materials used in vehicles...

Code of Federal Regulations, 2010 CFR

2010-10-01

... vehicle windows for driver visibility, and to minimize the possibility of occupants being thrown through the vehicle windows in collisions. S3. Application. This standard applies to glazing equipment...) [Reserved] (j) Windows and doors in motor homes, except for the windshield and windows to the immediate...

Lunar rover vehicle - an implication for rehabilitation

NASA Technical Reports Server (NTRS)

Mcfarland, S. R.; Primeauk, G. R.

1975-01-01

The feasibility of adapting the lunar roving vehicle control concept to automobiles and vans for quadriplegics was investigated. Topics discussed include the current state of automobile handicapped controls, a description of the affected population, and a design for interfacing the control system into a passenger vehice.

Effects on driving performance of interacting with an in-vehicle music player: a comparison of three interface layout concepts for information presentation.

PubMed

Mitsopoulos-Rubens, Eve; Trotter, Margaret J; Lenné, Michael G

2011-05-01

Interface design is an important factor in assessing the potential effects on safety of interacting with an in-vehicle information system while driving. In the current study, the layout of information on a visual display was manipulated to explore its effect on driving performance in the context of music selection. The comparative effects of an auditory-verbal (cognitive) task were also explored. The driving performance of 30 participants was assessed under both baseline and dual task conditions using the Lane Change Test. Concurrent completion of the music selection task with driving resulted in significant impairment to lateral driving performance (mean lane deviation and percentage of correct lane changes) relative to the baseline, and significantly greater mean lane deviation relative to the combined driving and the cognitive task condition. The magnitude of these effects on driving performance was independent of layout concept, although significant differences in subjective workload estimates and performance on the music selection task across layout concepts highlights that potential uncertainty regarding design use as conveyed through layout concept could be disadvantageous. The implications of these results for interface design and safety are discussed. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Comparing Driver Frontal Mortality in Vehicles with Redesigned and Older-Design Front Airbags

PubMed Central

Braver, Elisa R.; Kyrychenko, Sergey Y.; Ferguson, Susan A.

2004-01-01

In 1997, the National Highway Traffic Safety Administration amended its requirements for frontal crash performance under Federal Motor Vehicle Safety Standard 208 to temporarily allow 30 mph (48 kph) sled tests with unbelted dummies as an alternative to 30 mph head-on rigid-barrier vehicle tests. This change permitted automakers to reduce airbag inflation forces so that they would be less likely to injure occupants who are close to airbags when they first deploy. Most vehicle models were sled-certified starting in model year 1998. Airbag-related deaths have decreased since 1997; however, controversy persists about whether reduced inflation forces might be decreasing protection for some occupants in high-severity frontal crashes. To examine the effects of the regulatory changes, this study computed rate ratios (RR) and 95 percent confidence intervals (95% CI) for passenger vehicle driver deaths per vehicle registration during 2000–02 at principal impact points of 12 o’clock for 1998–99 model year vehicles relative to 1997 models. Passenger vehicles included in the study had both driver and passenger front airbags, had the same essential designs during the 1997–99 model years, and had been sled-certified for drivers throughout model years 1998 and 1999. An adjustment was made for the higher annual mileage of newer vehicles. Findings were that the effect of the regulatory change varied by vehicle type. For cars, sport utility vehicles, and minivans combined, there was an 11 percent decrease in fatality risk in frontal crashes after changing to sled certification (RR=0.89; 95% CI=0.82–0.96). Among pickups, however, estimated frontal fatality risk increased 35 percent (RR=1.35; 95% CI=1.12–1.62). For a broad range of frontal crashes (11, 12, and 1 o’clock combined), the results indicated a modest net benefit of the regulatory change across all vehicle types and driver characteristics. However, the contrary finding for pickups needs to be researched further

Comparing driver frontal mortality in vehicles with redesigned and older-design front airbags.

PubMed

Braver, Elisa R; Kyrychenko, Sergey Y; Ferguson, Susan A

2004-01-01

In 1997, the National Highway Traffic Safety Administration amended its requirements for frontal crash performance under Federal Motor Vehicle Safety Standard 208 to temporarily allow 30 mph (48 kph) sled tests with unbelted dummies as an alternative to 30 mph head-on rigid-barrier vehicle tests. This change permitted automakers to reduce airbag inflation forces so that they would be less likely to injure occupants who are close to airbags when they first deploy. Most vehicle models were sled-certified starting in model year 1998. Airbag-related deaths have decreased since 1997; however, controversy persists about whether reduced inflation forces might be decreasing protection for some occupants in high-severity frontal crashes. To examine the effects of the regulatory changes, this study computed rate ratios (RR) and 95 percent confidence intervals (95% CI) for passenger vehicle driver deaths per vehicle registration during 2000-02 at principal impact points of 12 o'clock for 1998-99 model year vehicles relative to 1997 models. Passenger vehicles included in the study had both driver and passenger front airbags, had the same essential designs during the 1997-99 model years, and had been sled-certified for drivers throughout model years 1998 and 1999. An adjustment was made for the higher annual mileage of newer vehicles. Findings were that the effect of the regulatory change varied by vehicle type. For cars, sport utility vehicles, and minivans combined, there was an 11 percent decrease in fatality risk in frontal crashes after changing to sled certification (RR=0.89; 95% CI=0.82-0.96). Among pickups, however, estimated frontal fatality risk increased 35 percent (RR=1.35; 95% CI=1.12-1.62). For a broad range of frontal crashes (11, 12, and 1 o'clock combined), the results indicated a modest net benefit of the regulatory change across all vehicle types and driver characteristics. However, the contrary finding for pickups needs to be researched further.

Rural and Urban Differences in Passenger-Vehicle–Occupant Deaths and Seat Belt Use Among Adults — United States, 2014

PubMed Central

Downs, Jonathan; Stevens, Mark R.; Sauber-Schatz, Erin K.

2017-01-01

Problem/Condition Motor-vehicle crashes are a leading cause of death in the United States. Compared with urban residents, rural residents are at an increased risk for death from crashes and are less likely to wear seat belts. These differences have not been well described by levels of rurality. Reporting Period 2014. Description of Systems Data from the Fatality Analysis Reporting System (FARS) and the Behavioral Risk Factor Surveillance System (BRFSS) were used to identify passenger-vehicle–occupant deaths from motor-vehicle crashes and estimate the prevalence of seat belt use. FARS, a census of U.S. motor-vehicle crashes involving one or more deaths, was used to identify passenger-vehicle–occupant deaths among adults aged ≥18 years. Passenger-vehicle occupants were defined as persons driving or riding in passenger cars, light trucks, vans, or sport utility vehicles. Death rates per 100,000 population, age-adjusted to the 2000 U.S. standard population and the proportion of occupants who were unrestrained at the time of the fatal crash, were calculated. BRFSS, an annual, state-based, random-digit–dialed telephone survey of the noninstitutionalized U.S. civilian population aged ≥18 years, was used to estimate prevalence of seat belt use. FARS and BRFSS data were analyzed by a six-level rural-urban designation, based on the U.S. Department of Agriculture 2013 rural-urban continuum codes, and stratified by census region and type of state seat belt enforcement law (primary or secondary). Results Within each census region, age-adjusted passenger-vehicle–occupant death rates per 100,000 population increased with increasing rurality, from the most urban to the most rural counties: South, 6.8 to 29.2; Midwest, 5.3 to 25.8; West, 3.9 to 40.0; and Northeast, 3.5 to 10.8. (For the Northeast, data for the most rural counties were not reported because of suppression criteria; comparison is for the most urban to the second-most rural counties.) Similarly, the

29 CFR 1917.44 - General rules applicable to vehicles. 4

Code of Federal Regulations, 2011 CFR

2011-07-01

... 1917.44 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) MARINE TERMINALS Cargo Handling Gear and Equipment § 1917.44 General rules applicable to vehicles. 4 4 The United States Coast Guard at 33 CFR 126.15(d) and (e) has additional...

29 CFR 1917.44 - General rules applicable to vehicles. 4

Code of Federal Regulations, 2010 CFR

2010-07-01

... 1917.44 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) MARINE TERMINALS Cargo Handling Gear and Equipment § 1917.44 General rules applicable to vehicles. 4 4 The United States Coast Guard at 33 CFR 126.15(d) and (e) has additional...

Asphyxia in Motor Vehicle Crashes: Analysis of Crash-Related Variables Using National Automotive Sampling System Crashworthiness Data System and Forensic Case Studies.

PubMed

Storvik, Steven G; Campbell, Julius Q; Wheeler, Jeffrey B

2017-06-01

Rates of death because of asphyxia in motor vehicle crashes have been previously estimated using county and statewide data sets, but national estimates have not been reported. The literature regarding asphyxia in motor vehicle crashes primarily involves discussions about clinical findings, and crash-related variables have been sparsely reported. The current study calculated a nationwide fatality rate for asphyxia in motor vehicle crashes of 1.4%. Seventeen case studies of asphyxia were also reported providing crash-, vehicle-, and occupant-related variables. These included type of accident, crash severity, seat belt use, containment status, extent of occupant compartment intrusion, height, weight, and injury pattern. The data presented can be used to better understand the injury mechanism, identify risk factors, develop possible protective countermeasures, and create situational awareness for emergency responders and investigators.

Mobile user interface development for the Virginia Connected Corridors.

DOT National Transportation Integrated Search

2016-10-15

The purpose of this research and development activity was to build a mobile application with a low-distraction user interface appropriate for use in a connected vehicle (CV) environment. To realize their full potential, future CV applications will in...

Pilot project to develop and implement a rural youth occupant protection education platform.

DOT National Transportation Integrated Search

2010-10-01

Occupant protection is one of the easiest and most inexpensive ways to protect yourself when riding in a motor vehicle. Yet many North Dakota youth, especially rural youth, fail to wear their seat belts, even with a primary seat belt law for children...

Demographics, Velocity Distributions, and Impact Type as Predictors of AIS 4+ Head Injuries in Motor Vehicle Crashes

PubMed Central

Yoganandan, Narayan; Fitzharris, Michael; Pintar, Frank A.; Stemper, Brian D.; Rinaldi, James; Maiman, Dennis J.; Fildes, Brian N.

2011-01-01

The objective of the study was to determine differences between the United States-based NASS and CIREN and Australia-based ANCIS databases in occupant-, crash-, and vehicle-related parameters for AIS 4+ head injuries in motor vehicle crashes. Logistic regression analysis was performed to examine roles of the change in velocity (DV), crash type (frontal, far-side, nearside, rear impact), seatbelt use, and occupant position, gender, age, stature, and body mass in cranial traumas. Belted and unbelted non-ejected occupant (age >16 years) data from 1997–2006 were used for the NASS and CIREN datasets, and 2000–2010 for ANCIS. Vehicle model year, and occupant position and demographics including body mass index (BMI) data were obtained. Injuries were coded using AIS 1990–1998 update. Similarities were apparent across all databases: mean demographics were close to the mid-size anthropometry, mean BMI was in the normal to overweight range, and representations of extreme variations were uncommon. Side impacts contributed to over one-half of the ensemble, implying susceptibility to head trauma in this mode. Odds of sustaining head injury increased by 4% per unit increase in DV (OR: 1.04, 95% CI: 1.03–1.04, p<0.001; adjusted for other variables); one-half for belted compared to unbelted occupants (OR: 0.48, 95% CI: 0.37–0.61, p<0.001); nearside, then far-side had significantly higher odds than frontal, and no difference by gender or position (front-left, front-right). Similar crash- and occupant-related outcomes from the two continents indicate a worldwide need to revise the translation acceleration-based head injury criterion to include the angular component in an appropriate format for improved injury assessment and mitigation. PMID:22105402

Standardized Modular Power Interfaces for Future Space Explorations Missions

NASA Technical Reports Server (NTRS)

Oeftering, Richard

2015-01-01

Earlier studies show that future human explorations missions are composed of multi-vehicle assemblies with interconnected electric power systems. Some vehicles are often intended to serve as flexible multi-purpose or multi-mission platforms. This drives the need for power architectures that can be reconfigured to support this level of flexibility. Power system developmental costs can be reduced, program wide, by utilizing a common set of modular building blocks. Further, there are mission operational and logistics cost benefits of using a common set of modular spares. These benefits are the goals of the Advanced Exploration Systems (AES) Modular Power System (AMPS) project. A common set of modular blocks requires a substantial level of standardization in terms of the Electrical, Data System, and Mechanical interfaces. The AMPS project is developing a set of proposed interface standards that will provide useful guidance for modular hardware developers but not needlessly constrain technology options, or limit future growth in capability. In 2015 the AMPS project focused on standardizing the interfaces between the elements of spacecraft power distribution and energy storage. The development of the modular power standard starts with establishing mission assumptions and ground rules to define design application space. The standards are defined in terms of AMPS objectives including Commonality, Reliability-Availability, Flexibility-Configurability and Supportability-Reusability. The proposed standards are aimed at assembly and sub-assembly level building blocks. AMPS plans to adopt existing standards for spacecraft command and data, software, network interfaces, and electrical power interfaces where applicable. Other standards including structural encapsulation, heat transfer, and fluid transfer, are governed by launch and spacecraft environments and bound by practical limitations of weight and volume. Developing these mechanical interface standards is more difficult but

Deployment of Shaped Charges by a Semi-Autonomous Ground Vehicle

DTIC Science & Technology

2007-06-01

lives on a daily basis. BigFoot seeks to replace the local human component by deploying and remotely detonating shaped charges to destroy IEDs...robotic arm to deploy and remotely detonate shaped charges. BigFoot incorporates improved communication range over previous Autonomous Ground Vehicles...and an updated user interface that includes controls for the arm and camera by interfacing multiple microprocessors. BigFoot is capable of avoiding

Auditory interfaces: The human perceiver

NASA Technical Reports Server (NTRS)

Colburn, H. Steven

1991-01-01

A brief introduction to the basic auditory abilities of the human perceiver with particular attention toward issues that may be important for the design of auditory interfaces is presented. The importance of appropriate auditory inputs to observers with normal hearing is probably related to the role of hearing as an omnidirectional, early warning system and to its role as the primary vehicle for communication of strong personal feelings.

Motor vehicle fatalities among oil and gas extraction workers.

PubMed

Retzer, Kyla D; Hill, Ryan D; Pratt, Stephanie G

2013-03-01

Motor vehicle crashes are the leading cause of work-related fatality in the U.S. as well as in the oil and gas extraction industry. This study describes the characteristics of motor vehicle-related fatalities in the oil and gas extraction industry using data from the U.S. Bureau of Labor Statistics' Census of Fatal Occupational Injuries. It compares the risk of dying in a motor vehicle crash in this industry to other major industries and among different types and sizes of oil and gas extraction companies. There were 202 oil and gas extraction workers who died in a work-related motor vehicle crash from 2003 to 2009. The motor vehicle fatality rate for workers in this industry was 8.5 times that of all private wage and salary workers (7.6 vs. 0.9, p<.0001). Workers from small oil and gas establishments (<20 workers) and workers from well-servicing companies were at greatest risk of dying in a motor vehicle crash. Pick-up trucks were the most frequent type of vehicle occupied by the fatally injured worker (n=104, 51.5%). Safety belt non-use was identified in 38.1% (n=77) of the cases. Increased focus on motor vehicle safety in this industry is needed, in particular among small establishments. Extraction workers who drive light duty vehicles need to be a specific focus. Published by Elsevier Ltd.

The effect of recent trends in vehicle design on U.S. societal fatality risk per vehicle mile traveled, and their projected future relationship with vehicle mass.

PubMed

Wenzel, Tom

2013-07-01

The National Highway Traffic Safety Administration (NHTSA) recently updated its 2003 and 2010 logistic regression analyses of the effect of a reduction in light-duty vehicle mass on US fatality risk per vehicle mile traveled (VMT). The current NHTSA analysis is the most thorough investigation of this issue to date. LBNL's assessment of the analysis indicates that the estimated effect of mass reduction on risk is smaller than in the previous studies, and statistically non-significant for all but the lightest cars. The effects three recent trends in vehicle designs and technologies have on societal fatality risk per VMT are estimated, and whether these changes might affect the relationship between vehicle mass and fatality risk in the future. Side airbags are found to reduce fatality risk in cars, but not necessarily light trucks or CUVs/minivans, struck in the side by another light-duty vehicle; reducing the number of fatalities in cars struck in the side is predicted to reduce the estimated detrimental effect of footprint reduction, but increase the detrimental effect of mass reduction, in cars on societal fatality risk. Better alignment of light truck bumpers with those of other vehicles appears to result in a statistically significant reduction in risk imposed on car occupants; however, reducing this type of fatality will likely have little impact on the estimated effect of mass or footprint reduction on risk. Finally, shifting light truck drivers into safer, car-based vehicles, such as sedans, CUVs, and minivans, would result in larger reductions in societal fatalities than expected from even substantial reductions in the masses of light trucks. A strategy of shifting drivers from truck-based to car-based vehicles would reduce fuel use and greenhouse gas emissions, while improving societal safety. Copyright © 2013 Elsevier Ltd. All rights reserved.

Fatal occupational injuries in the North Carolina construction industry, 1978-1994.

PubMed

Jackson, Seronda A; Loomis, Dana

2002-01-01

Occupational injury is a major public health problem and the cause of high rates of fatalities. The construction industry is one of the leading industries for on-the-job fatalities. The North Carolina Medical Examiner's system was used to identify all fatal unintentional injuries that occurred on the job in the state's construction industry between 1978 and 1994. The populations at risk were estimated from the 1980 and 1990 U.S. censuses. There were 525 identified deaths. All except two decedents were male, and the majority were Caucasian (79.2%). The mean age of decedents was 39 years. Death rates were higher among older workers. The crude fatality rate for the overall study period was 15.4 per 100,000 worker-years, with higher rates found among African-Americans (22.9) than among Caucasians (14.5). Occupations within the industry with the highest rates were laborers (49.5), truck drivers (43.2), operating engineers (37.2), roofers (32.8), and electricians (29.0). Falls (26.7%), electrocutions (20.4%), and motor vehicle accidents (18.9%) were found to be the leading causes of death. These findings suggest a need for continued attention to the hazards of heights and electric currents and a need for occupational safety standards for motor vehicles. This study also suggests that the hazards facing construction laborers require further investigation.

In-vehicle crash avoidance warning systems : human factors considerations

DOT National Transportation Integrated Search

1997-02-01

This document represents the final report of the work performed under contract DTNH22-91 C-07004, In-Vehicle Crash Avoidance Warning Systems: Human Factors Considerations. This project was performed to develop guidelines for the interface desig...

Development of Accommodation Models for Soldiers in Vehicles: Squad

DTIC Science & Technology

2014-09-01

existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments...Distribution Statement A. Approved for public release; distribution is unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT Data from a previous study...body armor and body borne gear. 15. SUBJECT TERMS Anthropometry , Posture, Vehicle Occupants, Accommodation 16. SECURITY CLASSIFICATION OF

How Safe is Vehicle Safety? The Contribution of Vehicle Technologies to the Reduction in Road Casualties in France from 2000 to 2010

PubMed Central

Page, Yves; Hermitte, Thierry; Cuny, Sophie

2011-01-01

In France, over the last 10 years, road fatalities have decreased dramatically by 48%. This reduction is somewhat close to the target fixed by the European Commision in 2001 for the whole of Europe (−50 %). According to the French govnerment, 75% of this reduction was due to the implementation of automatic speed cameras on the roadsides from 2003 onwards. Yet, during this period, there was also a significantly increase in safety technology, new regulations in front and side impacts, and developments in Euro NCAP to improve passive safety in the vehicles. This paper set out to estimate the extent that vehicle safety technologies contributed to the road safety benefits over this decade. Using a combination of databases and fitment rates, the number of fatalities and hospitalized injuries saved in passenger car crashes was estimated for a number of safety technologies, individually and as a package including a 5 star EuroNCAP rating. The additional benefits from other public safety measures were also similarly estimated. The results showed that overall safety measures during this decade saved 240,676 fatalities + serious injuries, of which 173,663 were car occupants. Of these, 27,365 car occupants and 1,083 pedestrian savings could be attributed directly to vehicle safety improvements (11% overall). It was concluded that while public safety measures were responsible for the majority of the savings, enhanced vehicle safety technologies also made a significant improvement in the road toll in France during the last decade. As the take-up rate for these technologies improves, is expected to continue to provide even more benefits in the next 10-year period. PMID:22105388

Reconstruction of Ares I-X Integrated Vehicle Rollout Loads

NASA Technical Reports Server (NTRS)

Chamberlain, Matthew K.; Hahn, Steven R.

2011-01-01

The measurements taken during the Ares I-X test flight provided a unique opportunity to assess the accuracy of the models and methods used to analyze the loads and accelerations present in the planned Ares I vehicle. During the rollout of the integrated vehicle from the Vehicle Assembly Building (VAB) to the launch pad, the vehicle and its supporting structure are subjected to wind loads and the vibrations produced by the crawler-transporter (CT) that is carrying it. While the loads induced on the vehicle during this period are generally low relative to those experienced in flight, the rollout is a period of operation of primary interest to those designing both the ground support equipment and the interfaces between the launch vehicle and its supporting structure. In this paper, the methods used for reconstructing the loads during the rollout phase are described. The results generated are compared to measured values, leading to insight into the accuracy of the Ares I assessment techniques.

Health surveillance for occupational asthma in the UK.

PubMed

Fishwick, D; Sen, D; Barker, P; Codling, A; Fox, D; Naylor, S

2016-07-01

Periodic health surveillance (HS) of workers can identify early cases of occupational asthma. Information about its uptake and its content in the UK is lacking. To identify the overall levels of uptake and quality of HS for occupational asthma within three high-risk industry sectors in the UK. A telephone survey of employers, and their occupational health (OH) professionals, carried out in three sectors with exposures potentially capable of causing occupational asthma (bakeries, wood working and motor vehicle repair). A total of 457 organizations participated (31% response rate). About 77% employed <10 people, 17% between 10 and 50 and 6% >50. Risk assessments were common (67%) and 14% carried out some form of HS for occupational asthma, rising to 19% if only organizations reporting asthma hazards and risks were considered. HS was carried out both by in-house (31%) and external providers (69%). Organizational policies were often used to define HS approaches (80%), but infrequently shared with the OH provider. OH providers described considerable variation in practice. Record keeping was universal, but worker-held records were not reported. HS tools were generally developed in-house. Lung function was commonly measured, but only limited interpretation evident. Referral of workers to local specialist respiratory services was variable. This study provided new insights into the real world of HS for occupational asthma. We consider that future work could and should define simpler, more practical and evidence-based approaches to HS to ensure maximal consistency and use of high-quality approaches. © Crown copyright 2016.

Integrated vehicle control and guidance systems in unmanned ground vehicles for commercial applications

NASA Astrophysics Data System (ADS)

Kenyon, Chase H.

1995-01-01

While there is a lot of recent development in the entire IVHS field, very few have had the opportunity to combine the many areas of development into a single integrated `intelligent' unmanned vehicle. One of our systems was developed specifically to serve a major automobile manufacturer's need for an automated vehicle chassis durability test facility. Due to the severity of the road surface human drivers could not be used. A totally automated robotic vehicle driver and guidance system was necessary. In order to deliver fixed price commercial projects now, it was apparent system and component costs were of paramount importance. Cyplex has developed a robust, cost effective single wire guidance system. This system has inherent advantages in system simplicity. Multi-signal (per vehicle lane) systems complicate path planning and layout when multiple lanes and lane changes are required, as on actual highways. The system has demonstrated high enough immunity to rain and light snow cover that normal safety reductions in speed are adequate to stay within the required system performance envelope. This system and it's antenna interface have shown the ability to guide the vehicle at slow speeds (10 MPH) with a tracking repeatability of plus or minus 1/8 of an inch. The basic guide and antenna system has been tested at speeds up to 80 mph. The system has inherently superior abilities for lane changes and precision vehicle placement. The operation of this system will be described and the impact of a system that is commercially viable now for highway and off road use will be discussed.

75 FR 37343 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-29

...\\ Morgan, Christina. ``Effectiveness of Lap/Shoulder Belts in the Back Outboard Seating Positions,'' DOT HS... has also pursued vehicle-based technologies for increasing seat belt use. These include sensors in the... driver position, enhanced SBRSs primarily relied on sensors found in the seat belt buckle and latch...

Minimum visual requirements in different occupations in Finland.

PubMed

Aine, E

1984-01-01

In Finland the employers can individually fix the minimum visual requirements for their personnel in almost every occupation. In transportation, in police and national defence proper eyesight is regarded so important that strict visual requirements for these have been fixed by the Government. The regulations are often more close when accepting the person to the occupation than later on when working. The minimum requirements are mostly stated for visual acuity, colour perception and visual fields. In some occupations the regulations concern also the refractive error of the eyes and possible eye diseases. In aviation the regulations have been stated by the International Civil Aviation Organization ( ICAO ). The minimum visual requirements for a driving license in highway traffic are classed according to the types of motor vehicles. In railways , maritime commerce and national defence the task of the worker determines the specified regulations. The policeman must have a distant visual acuity of 0.5 without eyeglasses in both eyes and nearly normal colour perception when starting the training course.

Movement Is Fun: An Occupational Therapy Perspective on a Program for Preschoolers.

ERIC Educational Resources Information Center

Young, Susan B.

1987-01-01

Movement is Fun is a preschool movement program developed by an occupational therapist. Based on sensory integration theory and using movement education concepts, the program's goal is to enhance normal development in 3- to 5-year-old children and provide a vehicle for early identification of developmental delays. (Author/KM)

A Vehicle Active Safety Model: Vehicle Speed Control Based on Driver Vigilance Detection Using Wearable EEG and Sparse Representation.

PubMed

Zhang, Zutao; Luo, Dianyuan; Rasim, Yagubov; Li, Yanjun; Meng, Guanjun; Xu, Jian; Wang, Chunbai

2016-02-19

In this paper, we present a vehicle active safety model for vehicle speed control based on driver vigilance detection using low-cost, comfortable, wearable electroencephalographic (EEG) sensors and sparse representation. The proposed system consists of three main steps, namely wireless wearable EEG collection, driver vigilance detection, and vehicle speed control strategy. First of all, a homemade low-cost comfortable wearable brain-computer interface (BCI) system with eight channels is designed for collecting the driver's EEG signal. Second, wavelet de-noising and down-sample algorithms are utilized to enhance the quality of EEG data, and Fast Fourier Transformation (FFT) is adopted to extract the EEG power spectrum density (PSD). In this step, sparse representation classification combined with k-singular value decomposition (KSVD) is firstly introduced in PSD to estimate the driver's vigilance level. Finally, a novel safety strategy of vehicle speed control, which controls the electronic throttle opening and automatic braking after driver fatigue detection using the above method, is presented to avoid serious collisions and traffic accidents. The simulation and practical testing results demonstrate the feasibility of the vehicle active safety model.

Lung Cancer and Occupation in a Population-based Case-Control Study

PubMed Central

Consonni, Dario; De Matteis, Sara; Lubin, Jay H.; Wacholder, Sholom; Tucker, Margaret; Pesatori, Angela Cecilia; Caporaso, Neil E.; Bertazzi, Pier Alberto; Landi, Maria Teresa

2010-01-01

The authors examined the relation between occupation and lung cancer in the large, population-based Environment And Genetics in Lung cancer Etiology (EAGLE) case-control study. In 2002–2005 in the Lombardy region of northern Italy, 2,100 incident lung cancer cases and 2,120 randomly selected population controls were enrolled. Lifetime occupational histories (industry and job title) were coded by using standard international classifications and were translated into occupations known (list A) or suspected (list B) to be associated with lung cancer. Smoking-adjusted odds ratios and 95% confidence intervals were calculated with logistic regression. For men, an increased risk was found for list A (177 exposed cases and 100 controls; odds ratio = 1.74, 95% confidence interval: 1.27, 2.38) and most occupations therein. No overall excess was found for list B with the exception of filling station attendants and bus and truck drivers (men) and launderers and dry cleaners (women). The authors estimated that 4.9% (95% confidence interval: 2.0, 7.8) of lung cancers in men were attributable to occupation. Among those in other occupations, risk excesses were found for metal workers, barbers and hairdressers, and other motor vehicle drivers. These results indicate that past exposure to occupational carcinogens remains an important determinant of lung cancer occurrence. PMID:20047975

Video-based real-time on-street parking occupancy detection system

NASA Astrophysics Data System (ADS)

Bulan, Orhan; Loce, Robert P.; Wu, Wencheng; Wang, YaoRong; Bernal, Edgar A.; Fan, Zhigang

2013-10-01

Urban parking management is receiving significant attention due to its potential to reduce traffic congestion, fuel consumption, and emissions. Real-time parking occupancy detection is a critical component of on-street parking management systems, where occupancy information is relayed to drivers via smart phone apps, radio, Internet, on-road signs, or global positioning system auxiliary signals. Video-based parking occupancy detection systems can provide a cost-effective solution to the sensing task while providing additional functionality for traffic law enforcement and surveillance. We present a video-based on-street parking occupancy detection system that can operate in real time. Our system accounts for the inherent challenges that exist in on-street parking settings, including illumination changes, rain, shadows, occlusions, and camera motion. Our method utilizes several components from video processing and computer vision for motion detection, background subtraction, and vehicle detection. We also present three traffic law enforcement applications: parking angle violation detection, parking boundary violation detection, and exclusion zone violation detection, which can be integrated into the parking occupancy cameras as a value-added option. Our experimental results show that the proposed parking occupancy detection method performs in real-time at 5 frames/s and achieves better than 90% detection accuracy across several days of videos captured in a busy street block under various weather conditions such as sunny, cloudy, and rainy, among others.

Intelligent vehicle control: Opportunities for terrestrial-space system integration

NASA Technical Reports Server (NTRS)

Shoemaker, Charles

1994-01-01

For 11 years the Department of Defense has cooperated with a diverse array of other Federal agencies including the National Institute of Standards and Technology, the Jet Propulsion Laboratory, and the Department of Energy, to develop robotics technology for unmanned ground systems. These activities have addressed control system architectures supporting sharing of tasks between the system operator and various automated subsystems, man-machine interfaces to intelligent vehicles systems, video compression supporting vehicle driving in low data rate digital communication environments, multiple simultaneous vehicle control by a single operator, path planning and retrace, and automated obstacle detection and avoidance subsystem. Performance metrics and test facilities for robotic vehicles were developed permitting objective performance assessment of a variety of operator-automated vehicle control regimes. Progress in these areas will be described in the context of robotic vehicle testbeds specifically developed for automated vehicle research. These initiatives, particularly as regards the data compression, task sharing, and automated mobility topics, also have relevance in the space environment. The intersection of technology development interests between these two communities will be discussed in this paper.

Vehicle model year and crash outcomes: a CIREN study.

PubMed

Ryb, Gabriel E; Dischinger, Patricia C; Ho, Shiu

2009-12-01

To quantify the effect of model year (MY) on the occurrence of severe injuries and death after involvement in motor vehicle crashes. Cases involving adult front seat occupants of vehicles MY > or = 1994 equipped with frontal airbags were selected from the Crash Injury Research and Engineering Network (CIREN) database. Cases were grouped by MY: 1994-1997, 1998-2004, and 2005-2007 (MY groups [MYG] 1, 2, and 3, respectively. MYGs were compared in relation to mortality, Injury Severity Score (ISS), and the occurrence of Abbreviated Injury Severity score (AIS) 3+ and AIS4+ injuries to each body region using Mantel Haenszel chi-square, Kruskal-Wallis, and Bonferroni corrected t test. To adjust for confounders, multiple logistic regression models were built to explore the association of MYG with death. Covariates included age, BMI, delta v, principal direction of force (PDOF), restraint use, and vehicle type. A total of 1888 cases was distributed within MYG1 (34%), MYG2 (62%), and MYG (34%). Age, gender, BMI, and PDOF distribution did not differ among MYGs. Though ISS distribution was not different, a decrease in the occurrence of AIS4+ of the thorax and spine regions was noted over time. Mortality also decreased over time (18, 9, and 4% MYG 1, 2, and 3, respectively). Multivariate analysis revealed a protective effect of MYG2 and MGY3 (odds ratio [OR], 0.57 [0.44-0.75] and 0.22 [0.07-0.50], respectively) in relation to death. Front seat occupants of later MY vehicles injured during crashes experience a decreased likelihood of very severe thoracic injuries, spinal injuries, and death.

78 FR 68748 - Federal Motor Vehicle Safety Standards; Designated Seating Positions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-15

... example, FMVSS No. 208, Occupant Crash Protection, requires that each DSP in a light vehicle be provided... Justice (AAJ), Safety Research and Strategies (SRS), Toyota Motor North America (Toyota), Mitsubishi... regarding the accuracy of the data related to the Acura Integra 2-Door, the agency stated: Safety Research...

Virtual Teleoperation for Unmanned Aerial Vehicles

DTIC Science & Technology

2012-01-24

Gilbert, S., “Wayfinder: Evaluating Multitouch Interaction in Supervisory Control of Unmanned Vehicles,” Proceedings of ASME 2nd World Conference on... interactive virtual reality environment that fuses available information into a coherent picture that can be viewed from multiple perspectives and scales...for multimodal interaction • Generally abstracted controller hardware and graphical interfaces facilitating deployment on a variety of VR platform

Occupational stress as it relates to higher education, individuals and organizations.

PubMed

Michailidis, Maria; Asimenos, Andreas

2002-01-01

This study examined through survey research methodology the degree to which, faculty, administrators and program coordinators, working in higher education, experience stress at work. The Occupational Stress Indicator was used, composed of four compound factors: sources of occupational stress, individual characteristics, coping strategies and the effects of stress. Preliminary findings showed that occupational stress has a negative impact on the degree of satisfaction with their achievement, value and growth, being strongest with faculty and coordinators, (dissatisfaction with career opportunities, personal growth, skill utilization). Another significant outcome was the dissatisfaction of faculty with the organizational design, structure and processes (communication, change implementation, motivation, supervision style, participation in decision-making). All possess individual characteristics of the Type A Scale; they all considered major sources of pressure in their jobs to be their relationships with others, home/work interface, their need to achieve personal and corporate success. Occupational stress has affected their state of health.

Parental occupational exposures and risk of childhood cancer.

PubMed Central

Colt, J S; Blair, A

1998-01-01

Occupational exposures of parents might be related to cancer in their offspring. Forty-eight published studies on this topic have reported relative risks for over 1000 specific occupation/cancer combinations. Virtually all of the studies employed the case-control design. Occupations and exposures of fathers were investigated much more frequently than those of the mother. Information about parental occupations was derived through interviews or from birth certificates and other administrative records. Specific exposures were typically estimated by industrial hygienists or were self-reported. The studies have several limitations related to the quality of the exposure assessment, small numbers of exposed cases, multiple comparisons, and possible bias toward the reporting of positive results. Despite these limitations, they provide evidence that certain parental exposures may be harmful to children and deserve further study. The strongest evidence is for childhood leukemia and paternal exposure to solvents, paints, and employment in motor vehicle-related occupations; and childhood nervous system cancers and paternal exposure to paints. To more clearly evaluate the importance of these and other exposures in future investigations, we need improvements in four areas: a) more careful attention must be paid to maternal exposures; b) studies should employ more sophisticated exposure assessment techniques; c) careful attention must be paid to the postulated mechanism, timing, and route of exposure; and d) if postnatal exposures are evaluated, studies should provide evidence that the exposure is actually transferred from the workplace to the child's environment. PMID:9646055

Efficacy of seat-mounted thoracic side airbags in the German vehicle fleet.

PubMed

Gaylor, Luke; Junge, Mirko; Abanteriba, Sylvester

2017-11-17

Thoracic side airbags (tSABs) deploy within close proximity to the occupant. Their primary purpose is to provide a protective cushion between the occupant and the intruding door. To date, various field studies investigating their injury mitigation has been limited and contradicting. The research develops efficacy estimations associated for seat-mounted tSABs in their ability to mitigate injury risk from the German collision environment. A matched cohort study using German In-Depth Accident Study (GIDAS) data was implemented and aims to investigate the efficacy of seat-mounted tSAB units in preventing thoracic injury. Inclusion in the study required a nearside occupant involved in a lateral collision where the target vehicle exhibited a design year succeeding 1990. Collisions whereby a tSAB deployed were matched on a 1:n basis to collisions of similar severity where no airbag was available in the target vehicle. The outcome of interest was an incurred bodily or thoracic regional injury. Through conditional logistic regression, an estimated efficacy value for the deployed tSAB was determined. A total of 255 collisions with the deployed tSAB matched with 414 collisions where no tSAB was present. For the given sample, results indicated that the deployed tSAB was not able to provide an unequivocal benefit to the occupant thoracic region, because individuals exposed to the deployed tSAB were at equal risk of injury (Thorax Maximum Abbreviated Injury Scale (Tho.MAIS)2+ odds ratio [OR] = 1.04, 95% confidence interval [CI], 0.41-2.62; Tho.MAIS3+ OR = 1.15, 95% CI, 0.41-3.18). When attempting to isolate an effect for skeletal injuries, a similar result was obtained. Yet, when the tSAB was coupled with a head curtain airbag, a protective effect became apparent, most noticeable for head/face/neck (HFN) injuries (OR = 0.59, 95% CI, 0.21-1.65). The reduction in occupant HFN injury risk associated with the coupled tSAB and curtain airbag may be attributable to its ability to

Economic costs of low safety belt usage in motor vehicle crashes in Kentucky.

DOT National Transportation Integrated Search

2005-10-01

By passing legislation in 2006 to mandate primary enforcement of the Kentucky state law requiring safety belt use for motor vehicle occupants, the state could expect to realize an overall savings of at least $118 million in direct medical costs over ...

A Large-Scale Design Integration Approach Developed in Conjunction with the Ares Launch Vehicle Program

NASA Technical Reports Server (NTRS)

Redmon, John W.; Shirley, Michael C.; Kinard, Paul S.

2012-01-01

This paper presents a method for performing large-scale design integration, taking a classical 2D drawing envelope and interface approach and applying it to modern three dimensional computer aided design (3D CAD) systems. Today, the paradigm often used when performing design integration with 3D models involves a digital mockup of an overall vehicle, in the form of a massive, fully detailed, CAD assembly; therefore, adding unnecessary burden and overhead to design and product data management processes. While fully detailed data may yield a broad depth of design detail, pertinent integration features are often obscured under the excessive amounts of information, making them difficult to discern. In contrast, the envelope and interface method results in a reduction in both the amount and complexity of information necessary for design integration while yielding significant savings in time and effort when applied to today's complex design integration projects. This approach, combining classical and modern methods, proved advantageous during the complex design integration activities of the Ares I vehicle. Downstream processes, benefiting from this approach by reducing development and design cycle time, include: Creation of analysis models for the Aerodynamic discipline; Vehicle to ground interface development; Documentation development for the vehicle assembly.

Determinants of the occupational environment and heavy vehicle crashes in Western Australia: A case-control study.

PubMed

Meuleners, Lynn; Fraser, Michelle L; Govorko, Matthew H; Stevenson, Mark R

2017-02-01

To determine the association between a heavy vehicle driver's work environment, including fatigue-related characteristics, and the risk of a crash in Western Australia. This case-control study included 100 long-haul heavy vehicle drivers who were involved in a police-reported crash in WA and 100 long-haul heavy vehicle drivers recruited from WA truck stops, who were not involved in a crash in the previous 12 months. Driver demographics and driving details, work environment, vehicle and sleep-related characteristics were obtained using an interviewer-administered questionnaire. Drivers were tested for obstructive sleep apnoea using an overnight diagnostic device. Conditional multiple logistic regression analysis was undertaken to determine work environment-related factors associated with crash involvement. After accounting for potential confounders, driving a heavy vehicle with an empty load was associated with almost a three-fold increased crash risk compared to carrying general freight (adjusted OR: 2.93, 95% CI: 1.17-7.34). Driving a rigid heavy vehicle was associated with a four-fold increased risk of crashing compared to articulated heavy vehicles (adjusted OR: 4.08, 95% CI: 1.13-14.68). The risk of crashing was almost five times higher when driving more than 50% of the trip between midnight and 5.59am (adjusted OR: 4.86, 95% CI: 1.47-16.07). Furthermore, the risk of crashing significantly increased if the time since the last break on the index trip was greater than 2h (adjusted OR: 2.18, 95% CI: 1.14-4.17). Drivers with more than 10 years driving experience were 52% less likely to be involved in a crash (adjusted OR: 0.48, 95% CI: 0.23-0.99). The results provide support for an association between a driver's work environment, fatigue-related factors, and the risk of heavy vehicle crash involvement. Greater attention needs to be paid to the creation of a safer work environment for long distance heavy vehicle drivers. Copyright © 2015 Elsevier Ltd. All rights

Route Sanitizer: Connected Vehicle Trajectory De-Identification Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, Jason M; Ferber, Aaron E

Route Sanitizer is ORNL's connected vehicle moving object database de-identification tool and a graphical user interface to ORNL's connected vehicle de-identification algorithm. It uses the Google Chrome (soon to be Electron) platform so it will run on different computing platforms. The basic de-identification strategy is record redaction: portions of a vehicle trajectory (e.g. sequences of precise temporal spatial records) are removed. It does not alter retained records. The algorithm uses custom techniques to find areas within trajectories that may be considered private, then it suppresses those in addition to enough of the trajectory surrounding those locations to protect against "inferencemore » attacks" in a mathematically sound way. Map data is integrated into the process to make this possible.« less

Natural Language Based Multimodal Interface for UAV Mission Planning

NASA Technical Reports Server (NTRS)

Chandarana, Meghan; Meszaros, Erica L.; Trujillo, Anna; Allen, B. Danette

2017-01-01

As the number of viable applications for unmanned aerial vehicle (UAV) systems increases at an exponential rate, interfaces that reduce the reliance on highly skilled engineers and pilots must be developed. Recent work aims to make use of common human communication modalities such as speech and gesture. This paper explores a multimodal natural language interface that uses a combination of speech and gesture input modalities to build complex UAV flight paths by defining trajectory segment primitives. Gesture inputs are used to define the general shape of a segment while speech inputs provide additional geometric information needed to fully characterize a trajectory segment. A user study is conducted in order to evaluate the efficacy of the multimodal interface.

Prevalence and pattern of occupational exposure to whole body vibration in Great Britain: findings from a national survey

PubMed Central

Palmer, K.; Griffin, M.; Bendall, H.; Pannett, B.; Coggon, D.

2000-01-01

OBJECTIVES—To estimate the number of workers in Great Britain with significant occupational exposure to whole body vibration (WBV) and to identify the common sources of exposure and the occupations and industries where such exposures arise.
METHODS—A postal questionnaire was posted to a random community sample of 22 194 men and women of working age. Among other things, the questionnaire asked about exposure to WBV in the past week, including occupational and common non-occupational sources. Responses were assessed by occupation and industry, and national prevalence estimates were derived from census information. Estimates were also made of the average estimated daily personal dose of vibration (eVDV).
RESULTS—From the 12 907 responses it was estimated that 7.2 million men and 1.8 million women in Great Britain are exposed to WBV at work in a 1 week period if the occupational use of cars, vans, buses, trains, and motor cycles is included within the definition of exposure. The eVDV of >374 000 men and 9000 women was estimated to exceed a proposed British Standard action level of 15 ms-1.75. Occupations in which the estimated exposures most often exceeded 15 ms-1.75 included forklift truck and mechanical truck drivers, farm owners and managers, farm workers, and drivers of road goods vehicles. These occupations also contributed the largest estimated numbers of workers in Great Britain with such levels of exposure. The highest estimated median occupational eVDVs were found in forklift truck drivers, drivers of road goods vehicles, bus and coach drivers, and technical and wholesale sales representatives, among whom a greater contribution to total dose was received from occupational exposures than from non-occupational ones; but in many other occupations the reverse applied. The most common sources of occupational exposure to WBV are cars, vans, forklift trucks, lorries, tractors, buses, and loaders.
CONCLUSIONS—Exposure to whole body vibration is