Relations between heavy-light meson and quark masses

DOE PAGES

Brambilla, N.; Komijani, J.; Kronfeld, A. S.; ...

2018-02-07

Here, the study of heavy-light meson masses should provide a way to determine renormalized quark masses and other properties of heavy-light mesons. In the context of lattice QCD, for example, it is possible to calculate hadronic quantities for arbitrary values of the quark masses. In this paper, we address two aspects relating heavy-light meson masses to the quark masses. First, we introduce a definition of the renormalized quark mass that is free of both scale dependence and renormalon ambiguities, and discuss its relation to more familiar definitions of the quark mass. We then show how this definition enters a mergermore » of the descriptions of heavy-light masses in heavy-quark effective theory and in chiral perturbation theory (χPT). For practical implementations of this merger, we extend the one-loop χPT corrections to lattice gauge theory with heavy-light mesons composed of staggered fermions for both quarks. Putting everything together, we obtain a practical formula to describe all-staggered heavy-light meson masses in terms of quark masses as well as some lattice artifacts related to staggered fermions. In a companion paper, we use this function to analyze lattice-QCD data and extract quark masses and some matrix elements defined in heavy-quark effective theory.« less

Light-meson masses in an unquenched quark model

NASA Astrophysics Data System (ADS)

Chen, Xiaoyun; Ping, Jialun; Roberts, Craig D.; Segovia, Jorge

2018-05-01

We perform a coupled-channels calculation of the masses of light mesons with the quantum numbers I JP =-, (I ,J )=0 , 1, by including q q ¯ and (q q ¯)2 components in a nonrelativistic chiral quark model. The coupling between two- and four-quark configurations is realized through a 3P0 quark-pair creation model. With the usual form of this operator, the mass shifts are large and negative, an outcome which raises serious issues of validity for the quenched quark model. Herein, therefore, we introduce some improvements of the 3P0 operator in order to reduce the size of the mass shifts. By introducing two simple factors, physically well motivated, the coupling between q q ¯ and (q q ¯)2 components is weakened, producing mass shifts that are around 10%-20% of hadron bare masses.

Light-meson masses in an unquenched quark model

DOE PAGES

Chen, Xiaoyun; Ping, Jialun; Roberts, Craig D.; ...

2018-05-17

We perform a coupled-channels calculation of the masses of light mesons with the quantum numbers IJ P=-, (I,J) = 0,1, by includingmore » $$q\\bar{q}$$ and ($$q\\bar{q}$$) 2 components in a nonrelativistic chiral quark model. The coupling between two- and four-quark configurations is realized through a 3P 0 quark-pair creation model. With the usual form of this operator, the mass shifts are large and negative, an outcome which raises serious issues of validity for the quenched quark model. Therefore, we introduce some improvements of the 3P 0 operator in order to reduce the size of the mass shifts. By introducing two simple factors, physically well motivated, the coupling between $$q\\bar{q}$$ and ($$q\\bar{q}$$) 2 components is weakened, producing mass shifts that are around 10%–20% of hadron bare masses.« less

Light-meson masses in an unquenched quark model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Xiaoyun; Ping, Jialun; Roberts, Craig D.

We perform a coupled-channels calculation of the masses of light mesons with the quantum numbers IJ P=-, (I,J) = 0,1, by includingmore » $$q\\bar{q}$$ and ($$q\\bar{q}$$) 2 components in a nonrelativistic chiral quark model. The coupling between two- and four-quark configurations is realized through a 3P 0 quark-pair creation model. With the usual form of this operator, the mass shifts are large and negative, an outcome which raises serious issues of validity for the quenched quark model. Therefore, we introduce some improvements of the 3P 0 operator in order to reduce the size of the mass shifts. By introducing two simple factors, physically well motivated, the coupling between $$q\\bar{q}$$ and ($$q\\bar{q}$$) 2 components is weakened, producing mass shifts that are around 10%–20% of hadron bare masses.« less

Wireless Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This guide provides federal facility managers with an overview of the energy savings potential of wireless lighting occupancy sensors for various room types, cost considerations, key steps to successful installation of wireless sensors, pros and cons of various technology options, light source considerations, and codes and standards.

Global trend according to estimated number of occupational accidents and fatal work-related diseases at region and country level.

PubMed

Hämäläinen, Päivi; Leena Saarela, Kaija; Takala, Jukka

2009-01-01

Although occupational accidents and work-related diseases have been of interest for a long time, due to lack of proper recording and notification systems the official numbers of occupational accidents and work-related diseases are missing for many countries. Presently, the demand for effectiveness and an interest in the economic aspects of accidents have increased prevention activities at company and country levels. Occupational accident data of selected countries and of World Health Organization regional divisions together with the global burden of disease were used in estimating global occupational accidents and fatal work-related diseases. The trend of global occupational accidents and work-related diseases is presented at region and country levels. The years 1998, 2001, and 2003 are compared in the case of occupational accidents and the years 2000 and 2002 in the case of work-related diseases. The total number of occupational accidents and fatal work-related diseases has increased, but the fatality rates per 100,000 workers have decreased. There were almost 360,000 fatal occupational accidents in 2003 and almost 2 million fatal work-related diseases in 2002. Every day more than 960,000 workers get hurt because of accidents. Each day 5,330 people die because of work-related diseases. Information on occupational accidents and work-related diseases is needed so that countries may understand better the importance of occupational health and safety at country and company level. Especially companies in developing countries are not familiar with occupational safety and health. Statistical data is essential for accident prevention; it is a starting point for the safety work.

23 CFR 810.210 - Authorization for use and occupancy by mass transit.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Authorization for use and occupancy by mass transit. 810.210 Section 810.210 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PUBLIC TRANSPORTATION MASS TRANSIT AND SPECIAL USE HIGHWAY PROJECTS Making Highway Rights-of-Way Available for Mass...

Cosmological Constraints from Galaxy Clustering and the Mass-to-number Ratio of Galaxy Clusters

NASA Astrophysics Data System (ADS)

Tinker, Jeremy L.; Sheldon, Erin S.; Wechsler, Risa H.; Becker, Matthew R.; Rozo, Eduardo; Zu, Ying; Weinberg, David H.; Zehavi, Idit; Blanton, Michael R.; Busha, Michael T.; Koester, Benjamin P.

2012-01-01

We place constraints on the average density (Ω m ) and clustering amplitude (σ8) of matter using a combination of two measurements from the Sloan Digital Sky Survey: the galaxy two-point correlation function, wp (rp ), and the mass-to-galaxy-number ratio within galaxy clusters, M/N, analogous to cluster M/L ratios. Our wp (rp ) measurements are obtained from DR7 while the sample of clusters is the maxBCG sample, with cluster masses derived from weak gravitational lensing. We construct nonlinear galaxy bias models using the Halo Occupation Distribution (HOD) to fit both wp (rp ) and M/N for different cosmological parameters. HOD models that match the same two-point clustering predict different numbers of galaxies in massive halos when Ω m or σ8 is varied, thereby breaking the degeneracy between cosmology and bias. We demonstrate that this technique yields constraints that are consistent and competitive with current results from cluster abundance studies, without the use of abundance information. Using wp (rp ) and M/N alone, we find Ω0.5 m σ8 = 0.465 ± 0.026, with individual constraints of Ω m = 0.29 ± 0.03 and σ8 = 0.85 ± 0.06. Combined with current cosmic microwave background data, these constraints are Ω m = 0.290 ± 0.016 and σ8 = 0.826 ± 0.020. All errors are 1σ. The systematic uncertainties that the M/N technique are most sensitive to are the amplitude of the bias function of dark matter halos and the possibility of redshift evolution between the SDSS Main sample and the maxBCG cluster sample. Our derived constraints are insensitive to the current level of uncertainties in the halo mass function and in the mass-richness relation of clusters and its scatter, making the M/N technique complementary to cluster abundances as a method for constraining cosmology with future galaxy surveys.

Exposure to potential occupational asthmogens: prevalence data from the National Occupational Exposure Survey.

PubMed

de la Hoz, R E; Young, R O; Pedersen, D H

1997-02-01

Few data are available about the prevalence of occupational exposures to agents which can cause occupational asthma or aggravate preexisting asthma (asthmogens). Using potential occupational exposure data from the National Occupational Exposure Survey (NOES) of 1980-1983, we investigated the number of asthmogen exposures, asthmogen-exposure(s) per production worker, and unprotected occupational asthmogen exposures in different industries and occupations. Data for the entire United States were used to generate estimates of occupational exposure at two selected state and local levels. It was estimated that 7,864,000 workers in the surveyed industries were potentially exposed to one or more occupational asthmogen(s) in the United States. The average number of observed potential exposures per asthmogen-exposed worker was 4.4, and varied from 11.9, in the Water Transportation industry, to 1.2 in Local and Suburban transportation. The largest number of observed potential exposures was recorded in the Apparel and Other Finished Products (garment) industry. This work and further analyses using this approach are expected to contribute to a better understanding of the epidemiology of occupational asthma, and to serve as a guide to target future occupational asthma surveillance efforts.

Precise charm to strange mass ratio and light quark masses from full lattice QCD.

PubMed

Davies, C T H; McNeile, C; Wong, K Y; Follana, E; Horgan, R; Hornbostel, K; Lepage, G P; Shigemitsu, J; Trottier, H

2010-04-02

By using a single formalism to handle charm, strange, and light valence quarks in full lattice QCD for the first time, we are able to determine ratios of quark masses to 1%. For m(c)/m(s) we obtain 11.85(16), an order of magnitude more precise than the current PDG average. Combined with 1% determinations of the charm quark mass now possible this gives m(s)(2 GeV)=92.4(1.5) MeV. The MILC result for m(s)/m(l)=27.2(3) yields m(l)(2 GeV)=3.40(7) MeV for the average of u and d quark masses.

Image Processing Occupancy Sensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Image Processing Occupancy Sensor, or IPOS, is a novel sensor technology developed at the National Renewable Energy Laboratory (NREL). The sensor is based on low-cost embedded microprocessors widely used by the smartphone industry and leverages mature open-source computer vision software libraries. Compared to traditional passive infrared and ultrasonic-based motion sensors currently used for occupancy detection, IPOS has shown the potential for improved accuracy and a richer set of feedback signals for occupant-optimized lighting, daylighting, temperature setback, ventilation control, and other occupancy and location-based uses. Unlike traditional passive infrared (PIR) or ultrasonic occupancy sensors, which infer occupancy based only onmore » motion, IPOS uses digital image-based analysis to detect and classify various aspects of occupancy, including the presence of occupants regardless of motion, their number, location, and activity levels of occupants, as well as the illuminance properties of the monitored space. The IPOS software leverages the recent availability of low-cost embedded computing platforms, computer vision software libraries, and camera elements.« less

Dim Light at Night Increases Body Mass of Female Mice

PubMed Central

Aubrecht, Taryn G.; Jenkins, Richelle; Nelson, Randy J.

2016-01-01

During the past century the prevalence of light at night has increased in parallel with obesity rates. Dim light at night (dLAN) increases body mass in male mice. However, the effects of light at night on female body mass remain unspecified. Thus, female mice were exposed to a standard light/dark (LD; 16h light at ~150 lux/8h dark at ~0 lux) cycle or to light/dim light at night (dLAN; 16h light at ~150 lux/8h dim light at ~5 lux) cycles for six weeks. Females exposed to dLAN increased the rate of change in body mass compared to LD mice despite reduced total food intake during weeks five and six, suggesting that dLAN disrupted circadian rhythms resulting in deranged metabolism. PMID:25431079

Dim light at night increases body mass of female mice.

PubMed

Aubrecht, Taryn G; Jenkins, Richelle; Nelson, Randy J

2015-05-01

During the past century, the prevalence of light at night has increased in parallel with obesity rates. Dim light at night (dLAN) increases body mass in male mice. However, the effects of light at night on female body mass remain unspecified. Thus, female mice were exposed to a standard light/dark (LD; 16 h light at ∼150 lux/8 h dark at ∼0 lux) cycle or to light/dim light at night (dLAN; 16 h light at ∼150 lux/8 h dim light at ∼5 lux) cycles for six weeks. Females exposed to dLAN increased the rate of change in body mass compared to LD mice despite reduced total food intake during weeks five and six, suggesting that dLAN disrupted circadian rhythms resulting in deranged metabolism.

Photon mass drag and the momentum of light in a medium

NASA Astrophysics Data System (ADS)

Partanen, Mikko; Häyrynen, Teppo; Oksanen, Jani; Tulkki, Jukka

2017-06-01

Conventional theories of electromagnetic waves in a medium assume that the energy propagating with the light pulse in the medium is entirely carried by the field. Thus, the possibility that the optical force field of the light pulse would drive forward an atomic mass density wave (MDW) and the related kinetic and elastic energies is neglected. In this work, we present foundations of a covariant theory of light propagation in a medium by considering a light wave simultaneously with the dynamics of the medium atoms driven by optoelastic forces between the induced dipoles and the electromagnetic field. We show that a light pulse having a total electromagnetic energy ℏ ω propagating in a nondispersive medium transfers a mass equal to δ m =(n2-1 ) ℏ ω /c2 , where n is the refractive index. MDW, which carries this mass, consists of atoms, which are more densely spaced inside the light pulse as a result of the field-dipole interaction. We also prove that the transfer of mass with the light pulse, the photon mass drag effect, gives an essential contribution to the total momentum of the light pulse, which becomes equal to the Minkowski momentum pM=n ℏ ω /c . The field's share of the momentum is the Abraham momentum pA=ℏ ω /(n c ) , while the difference pM-pA is carried by MDW. Due to the coupling of the field and matter, only the total momentum of the light pulse and the transferred mass δ m can be directly measured. Thus, our theory gives an unambiguous physical meaning to the Abraham and Minkowski momenta. We also show that to solve the centenary Abraham-Minkowski controversy of the momentum of light in a nondispersive medium in a way that is consistent with Newton's first law, one must account for the mass transfer effect. We derive the photon mass drag effect using two independent but complementary covariant models. In the mass-polariton (MP) quasiparticle approach, we consider the light pulse as a coupled state between the photon and matter, isolated from

The Skinny on Success: Body Mass, Gender and Occupational Standing across the Life Course

ERIC Educational Resources Information Center

Glass, Christy M.; Haas, Steven A.; Reither, Eric N.

2010-01-01

Several studies have analyzed the impact of obesity on occupational standing. This study extends previous research by estimating the influence of body mass on occupational attainment over three decades of the career using data from the Wisconsin Longitudinal Study. In a series of covariance structure analyses, we considered three mechanisms that…

Natural occupation numbers in two-electron quantum rings.

PubMed

Tognetti, Vincent; Loos, Pierre-François

2016-02-07

Natural orbitals (NOs) are central constituents for evaluating correlation energies through efficient approximations. Here, we report the closed-form expression of the NOs of two-electron quantum rings, which are prototypical finite-extension systems and new starting points for the development of exchange-correlation functionals in density functional theory. We also show that the natural occupation numbers for these two-electron paradigms are in general non-vanishing and follow the same power law decay as atomic and molecular two-electron systems.

Natural occupation numbers in two-electron quantum rings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tognetti, Vincent, E-mail: vincent.tognetti@univ-rouen.fr; Loos, Pierre-François

2016-02-07

Natural orbitals (NOs) are central constituents for evaluating correlation energies through efficient approximations. Here, we report the closed-form expression of the NOs of two-electron quantum rings, which are prototypical finite-extension systems and new starting points for the development of exchange-correlation functionals in density functional theory. We also show that the natural occupation numbers for these two-electron paradigms are in general non-vanishing and follow the same power law decay as atomic and molecular two-electron systems.

Quantification of differences between occupancy and total monitoring periods for better assessment of exposure to particles in indoor environments

NASA Astrophysics Data System (ADS)

Wierzbicka, A.; Bohgard, M.; Pagels, J. H.; Dahl, A.; Löndahl, J.; Hussein, T.; Swietlicki, E.; Gudmundsson, A.

2015-04-01

For the assessment of personal exposure, information about the concentration of pollutants when people are in given indoor environments (occupancy time) are of prime importance. However this kind of data frequently is not reported. The aim of this study was to assess differences in particle characteristics between occupancy time and the total monitoring period, with the latter being the most frequently used averaging time in the published data. Seven indoor environments were selected in Sweden and Finland: an apartment, two houses, two schools, a supermarket, and a restaurant. They were assessed for particle number and mass concentrations and number size distributions. The measurements using a Scanning Mobility Particle Sizer and two photometers were conducted for seven consecutive days during winter in each location. Particle concentrations in residences and schools were, as expected, the highest during occupancy time. In the apartment average and median PM2.5 mass concentrations during the occupancy time were 29% and 17% higher, respectively compared to total monitoring period. In both schools, the average and medium values of the PM2.5 mass concentrations were on average higher during teaching hours compared to the total monitoring period by 16% and 32%, respectively. When it comes to particle number concentrations (PNC), in the apartment during occupancy, the average and median values were 33% and 58% higher, respectively than during the total monitoring period. In both houses and schools the average and median PNC were similar for the occupancy and total monitoring periods. General conclusions on the basis of measurements in the limited number of indoor environments cannot be drawn. However the results confirm a strong dependence on type and frequency of indoor activities that generate particles and site specificity. The results also indicate that the exclusion of data series during non-occupancy periods can improve the estimates of particle concentrations and

Correlations of occupation numbers in the canonical ensemble and application to a Bose-Einstein condensate in a one-dimensional harmonic trap

NASA Astrophysics Data System (ADS)

Giraud, Olivier; Grabsch, Aurélien; Texier, Christophe

2018-05-01

We study statistical properties of N noninteracting identical bosons or fermions in the canonical ensemble. We derive several general representations for the p -point correlation function of occupation numbers n1⋯np ¯. We demonstrate that it can be expressed as a ratio of two p ×p determinants involving the (canonical) mean occupations n1¯, ..., np¯, which can themselves be conveniently expressed in terms of the k -body partition functions (with k ≤N ). We draw some connection with the theory of symmetric functions and obtain an expression of the correlation function in terms of Schur functions. Our findings are illustrated by revisiting the problem of Bose-Einstein condensation in a one-dimensional harmonic trap, for which we get analytical results. We get the moments of the occupation numbers and the correlation between ground-state and excited-state occupancies. In the temperature regime dominated by quantum correlations, the distribution of the ground-state occupancy is shown to be a truncated Gumbel law. The Gumbel law, describing extreme-value statistics, is obtained when the temperature is much smaller than the Bose-Einstein temperature.

Entropy Production in Collisionless Systems. II. Arbitrary Phase-space Occupation Numbers

NASA Astrophysics Data System (ADS)

Barnes, Eric I.; Williams, Liliya L. R.

2012-04-01

We present an analysis of two thermodynamic techniques for determining equilibria of self-gravitating systems. One is the Lynden-Bell (LB) entropy maximization analysis that introduced violent relaxation. Since we do not use the Stirling approximation, which is invalid at small occupation numbers, our systems have finite mass, unlike LB's isothermal spheres. (Instead of Stirling, we utilize a very accurate smooth approximation for ln x!.) The second analysis extends entropy production extremization to self-gravitating systems, also without the use of the Stirling approximation. In addition to the LB statistical family characterized by the exclusion principle in phase space, and designed to treat collisionless systems, we also apply the two approaches to the Maxwell-Boltzmann (MB) families, which have no exclusion principle and hence represent collisional systems. We implicitly assume that all of the phase space is equally accessible. We derive entropy production expressions for both families and give the extremum conditions for entropy production. Surprisingly, our analysis indicates that extremizing entropy production rate results in systems that have maximum entropy, in both LB and MB statistics. In other words, both thermodynamic approaches lead to the same equilibrium structures.

The radial velocity, velocity dispersion, and mass-to-light ratio of the Sculptor dwarf galaxy

NASA Technical Reports Server (NTRS)

Armandroff, T. E.; Da Costa, G. S.

1986-01-01

The radial velocity, velocity dispersion, and mass-to-light ratio for 16 K giants in the Sculptor dwarf galaxy are calculated. Spectra at the Ca II triplet are analyzed using cross-correlation techniques in order to obtain the mean velocity of + 107.4 + or - 2.0 km/s. The dimensional velocity dispersion estimated as 6.3 (+1.1, -1.3) km/s is combined with the calculated core radius and observed central surface brightness to produce a mass-to-light ratio of 6.0 in solar units. It is noted that the data indicate that the Sculptor contains a large amount of mass not found in globular clusters, and the mass is either in the form of remnant stars or low-mass dwarfs.

The 6dF Galaxy Survey: dependence of halo occupation on stellar mass

NASA Astrophysics Data System (ADS)

Beutler, Florian; Blake, Chris; Colless, Matthew; Jones, D. Heath; Staveley-Smith, Lister; Campbell, Lachlan; Parker, Quentin; Saunders, Will; Watson, Fred

2013-03-01

In this paper we study the stellar mass dependence of galaxy clustering in the 6dF Galaxy Survey (6dFGS). The near-infrared selection of 6dFGS allows more reliable stellar mass estimates compared to optical bands used in other galaxy surveys. Using the halo occupation distribution model, we investigate the trend of dark matter halo mass and satellite fraction with stellar mass by measuring the projected correlation function, wp(rp). We find that the typical halo mass (M1) as well as the satellite power-law index (α) increases with stellar mass. This indicates (1) that galaxies with higher stellar mass sit in more massive dark matter haloes and (2) that these more massive dark matter haloes accumulate satellites faster with growing mass compared to haloes occupied by low stellar mass galaxies. Furthermore, we find a relation between M1 and the minimum dark matter halo mass (Mmin) of M1 ≈ 22 Mmin, in agreement with similar findings for Sloan Digital Sky Survey galaxies. The satellite fraction of 6dFGS galaxies declines with increasing stellar mass from 21 per cent at Mstellar = 2.6 × 1010 h-2 M⊙ to 12 per cent at Mstellar = 5.4 × 1010 h-2 M⊙ indicating that high stellar mass galaxies are more likely to be central galaxies. We compare our results to two different semi-analytic models derived from the Millennium Simulation, finding some disagreement. Our results can be used for placing new constraints on semi-analytic models in the future, particularly the behaviour of luminous red satellites. Finally, we compare our results to studies of halo occupation using galaxy-galaxy weak lensing. We find good overall agreement, representing a valuable cross-check for these two different tools of studying the matter distribution in the Universe.

Ethical Tensions Related to Systemic Constraints: Occupational Alienation in Occupational Therapy Practice.

PubMed

Durocher, Evelyne; Kinsella, Elizabeth Anne; McCorquodale, Lisa; Phelan, Shanon

2016-09-03

Ethical tensions arise daily in health care practice and are frequently related to health care system structures or policies. Collective case study methodology was adopted to examine ethical tensions reported by occupational therapists practicing in different settings in Southwestern Ontario, Canada. Inductive analysis involving multiple layers of coding was conducted. This article focuses on tensions related to systemic constraints. Participants reported ethical tensions related to balancing client priorities with those of health care services. Four themes related to systemic constraints were identified including imposed practices, ineffective processes, resource limitations, and lack of services. Therapists' aims could be seen to align with an "ethic of care" and were seen to be in tension in light of systemic constraints. The findings raise issues related to occupational justice, particularly related to occupational alienation in occupational therapy practice, and open conversations related to neoliberalist health care agendas. © The Author(s) 2016.

A field demonstration of energy conservation using occupancy sensor lighting control in equipment rooms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dagle, J.E.

1992-09-01

The Pacific Northwest Laboratory identified energy savings potential of automatic equipment-room lighting controls, which was demonstrated by the field experiment described in this report. Occupancy sensor applications have gained popularity in recent years due to improved technology that enhances reliability and reduces cost. Automatic lighting control using occupancy sensors has been accepted as an energy-conservation measure because it reduces wasted lighting. This study focused on lighting control for equipment rooms, which have inherent conditions ideal for automatic lighting control, i.e., an area which is seldom occupied, multiple users of the area who would not know if others are in themore » room when they leave, and high lighting energy intensity in the area. Two rooms were selected for this study: a small equipment room in the basement of the 337 Building, and a large equipment area in the upper level of the 329 Building. The rooms were selected to demonstrate the various degrees of complexity which may be encountered in equipment rooms throughout the Hanford Site. The 337 Building equipment-room test case demonstrated a 97% reduction in lighting energy consumption, with an annual energy savings of $184. Including lamp-replacement savings, a total savings of $306 per year is offset by an initial installation cost of $1,100. The installation demonstrates a positive net present value of $2,858 when the lamp-replacement costs are included in a life-cycle analysis. This also corresponds to a 4.0-year payback period. The 329 Building equipment-room installation resulted in a 92% reduction in lighting energy consumption. This corresponds to annual energy savings of $1,372, and a total annual savings of $2,104 per year including lamp-replacement savings. The life-cycle cost analysis shows a net present value of $15,855, with a 5.8-year payback period.« less

Infinite occupation number basis of bosons: Solving a numerical challenge

NASA Astrophysics Data System (ADS)

Geißler, Andreas; Hofstetter, Walter

2017-06-01

In any bosonic lattice system, which is not dominated by local interactions and thus "frozen" in a Mott-type state, numerical methods have to cope with the infinite size of the corresponding Hilbert space even for finite lattice sizes. While it is common practice to restrict the local occupation number basis to Nc lowest occupied states, the presence of a finite condensate fraction requires the complete number basis for an exact representation of the many-body ground state. In this work we present a truncation scheme to account for contributions from higher number states. By simply adding a single coherent-tail state to this common truncation, we demonstrate increased numerical accuracy and the possible increase in numerical efficiency of this method for the Gutzwiller variational wave function and within dynamical mean-field theory.

Dark matter contraction and stellar-mass-to-light ratio gradients in massive early-type galaxies

NASA Astrophysics Data System (ADS)

Oldham, Lindsay J.; Auger, Matthew W.

2018-05-01

We present models for the dark and luminous mass structure of 12 strong lensing early-type galaxies. We combine pixel-based modelling of multiband Hubble Space Telescope imaging with Jeans modelling of kinematics obtained from Keck/ESI spectra to disentangle the dark and luminous contributions to the mass. Assuming a generalised NFW (gNFW) profile for the dark matter halo and a spatially constant stellar-mass-to-light ratio ϒ⋆ for the baryonic mass, we infer distributions for ϒ⋆ consistent with initial mass functions (IMFs) that are heavier than the Milky Way's (with a global mean mismatch parameter relative to a Chabrier IMF μαc = 1.80 ± 0.14) and halo inner density slopes that span a large range but are generally cuspier than the dark-matter-only prediction (μ _{γ ^' }} = 2.01_{-0.22}^{+0.19}). We investigate possible reasons for overestimating the halo slope, including the neglect of spatially varying stellar-mass-to-light ratios and/or stellar orbital anisotropy, and find that a quarter of the systems prefer radially declining stellar-mass-to-light ratio gradients, but that the overall effect on our inference on the halo slope is small. We suggest a coherent explanation of these results in the context of inside-out galaxy growth, and that the relative importance of different baryonic processes in shaping the dark halo may depend on halo environment.

Phenotyping polyclonal kappa and lambda light chain molecular mass distributions in patient serum using mass spectrometry.

PubMed

Barnidge, David R; Dasari, Surendra; Ramirez-Alvarado, Marina; Fontan, Adrian; Willrich, Maria A V; Tschumper, Renee C; Jelinek, Diane F; Snyder, Melissa R; Dispenzieri, Angela; Katzmann, Jerry A; Murray, David L

2014-11-07

We previously described a microLC-ESI-Q-TOF MS method for identifying monoclonal immunoglobulins in serum and then tracking them over time using their accurate molecular mass. Here we demonstrate how the same methodology can be used to identify and characterize polyclonal immunoglobulins in serum. We establish that two molecular mass distributions observed by microLC-ESI-Q-TOF MS are from polyclonal kappa and lambda light chains using a combination of theoretical molecular masses from gene sequence data and the analysis of commercially available purified polyclonal IgG kappa and IgG lambda from normal human serum. A linear regression comparison of kappa/lambda ratios for 74 serum samples (25 hypergammaglobulinemia, 24 hypogammaglobulinemia, 25 normal) determined by microflowLC-ESI-Q-TOF MS and immunonephelometry had a slope of 1.37 and a correlation coefficient of 0.639. In addition to providing kappa/lambda ratios, the same microLC-ESI-Q-TOF MS analysis can determine the molecular mass for oligoclonal light chains observed above the polyclonal background in patient samples. In 2 patients with immune disorders and hypergammaglobulinemia, we observed a skewed polyclonal molecular mass distribution which translated into biased kappa/lambda ratios. Mass spectrometry provides a rapid and simple way to combine the polyclonal kappa/lambda light chain abundance ratios with the identification of dominant monoclonal as well as oligoclonal light chain immunoglobulins. We anticipate that this approach to evaluating immunoglobulin light chains will lead to improved understanding of immune deficiencies, autoimmune diseases, and antibody responses.

Seated Occupant Apparent Mass Characteristics Under Automotive Postures and Vertical Vibration

NASA Astrophysics Data System (ADS)

RAKHEJA, S.; HARU, I.; BOILEAU, P.-É.

2002-05-01

The biodynamic apparent mass response characteristics of 24 human subjects (12 males and 12 females) seated under representative automotive postures with hands-in-lap (passengers) and hands-on-steering wheel (drivers) are reported. The measurements were carried out under white noise vertical excitations of 0·25, 0·5 and 1·0m/s2r.m.s. acceleration magnitudes in the 0·5-40Hz frequency range and a track measured input (1·07m/s2). The measured data have been analyzed to study the effects of hands position, body mass, magnitude and type of vibration excitation, and feet position, on the biodynamic response expressed in terms of apparent mass. A comparison of the measured response of subjects assuming typical automotive postures involving inclined cushion, inclined backrest and full use of backrest support with data determined under different postural conditions and excitation levels revealed considerable differences. The biodynamic response of automobile occupants seated with hands in lap, peaks in the 6·5-8·6Hz frequency range, which is considerably higher than the reported range of fundamental frequencies (4·5-5Hz) in most other studies involving different experimental conditions. The peak magnitude tends to decrease considerably for the driving posture with hands-on-steering wheel, while a second peak in the 8-12 Hz range becomes more apparent for this posture. The results suggest that biodynamic response of occupants seated in automotive seats and subject to vertical vibration need to be characterized, as a minimum, by two distinct functions for passenger and driving postures. A higher body mass, in general, yields higher peak magnitude response and lower corresponding frequency for both postures. The strong dependence of the response on the body mass is further demonstrated by grouping the measured data into four different mass ranges: less than 60 kg, between 60·5 and 70 kg, between 70·5 and 80 kg, and above 80 kg. From the results, it is concluded that

[Methodology of risk assessment by the occupational physician at the light of new legislative rules].

PubMed

Bergamaschi, A; Pietroiusti, A; Gianello, G; Magrini, A

2008-01-01

The occupational physician may play a crucial role in the risk assessment of workers in a given occupational environment. In fact, according to the current italian legislation, the document on risk assessment must be produced by the employer, with the cooperation of the responsible for prevention and safety and, in the due contexts, with the contribution of the occupational physician. Therefore, a cooperation between the different figures involved in the process is a pre-requisite for the elaboration of an adequate planning of preventive measures. From the point of view of the occupational physician, it seems necessary a preliminary in-depth knowledge of the plant and of the various steps of the productive process. In particular it is mandatory to have precise data on the number of workers, the mean age, work seniority, and the percentage of disabled workers. As a corollary, it is important to know the frequency of occupational related disorders, the number of accident at work, and the possible presence of contentious procedures with security organisms. Several important open questions remain, however: in particular to establish a causal relationship of any disorder with occupational situtations and to discriminate between distressing situations inside and outside the work environment.

Occupational Class Differences in Body Mass Index and Weight Gain in Japan and Finland

PubMed Central

Silventoinen, Karri; Tatsuse, Takashi; Martikainen, Pekka; Rahkonen, Ossi; Lahelma, Eero; Sekine, Michikazu; Lallukka, Tea

2013-01-01

Background Occupational class differences in body mass index (BMI) have been systematically reported in developed countries, but the studies have mainly focused on white populations consuming a Westernized diet. We compared occupational class differences in BMI and BMI change in Japan and Finland. Methods The baseline surveys were conducted during 1998–1999 among Japanese (n = 4080) and during 2000–2002 among Finnish (n = 8685) public-sector employees. Follow-up surveys were conducted among those still employed, in 2003 (n = 3213) and 2007 (n = 7086), respectively. Occupational class and various explanatory factors were surveyed in the baseline questionnaires. Linear regression models were used for data analysis. Results BMI was higher at baseline and BMI gain was more rapid in Finland than in Japan. In Finland, baseline BMI was lowest among men and women in the highest occupational class and progressively increased to the lowest occupational class; no gradient was found in Japan (country interaction effect, P = 0.020 for men and P < 0.0001 for women). Adjustment for confounding factors reflecting work conditions and health behavior increased the occupational class gradient among Finnish men and women, whereas factors related to social life had no effect. No statistically significant difference in BMI gain was found between occupational classes. Conclusions The occupational class gradient in BMI was strong among Finnish employees but absent among Japanese employees. This suggests that occupational class inequalities in obesity are not inevitable, even in high-income societies. PMID:24140817

The Mass of Graviton and Its Relation to the Number of Information according to the Holographic Principle

PubMed Central

Gkigkitzis, Ioannis

2014-01-01

We investigate the relation of the mass of the graviton to the number of information N in a flat universe. As a result we find that the mass of the graviton scales as mgr∝1/N. Furthermore, we find that the number of gravitons contained inside the observable horizon is directly proportional to the number of information N; that is, N gr ∝ N. Similarly, the total mass of gravitons that exist in the universe is proportional to the number of information N; that is, Mgr∝N. In an effort to establish a relation between the graviton mass and the basic parameters of the universe, we find that the mass of the graviton is simply twice the Hubble mass m H as it is defined by Gerstein et al. (2003), times the square root of the quantity q − 1/2, where q is the deceleration parameter of the universe. In relation to the geometry of the universe we find that the mass of the graviton varies according to the relation mgr∝Rsc, and therefore m gr obviously controls the geometry of the space time through a deviation of the geodesic spheres from the spheres of Euclidean metric. PMID:27433513

AutoLens: Automated Modeling of a Strong Lens's Light, Mass and Source

NASA Astrophysics Data System (ADS)

Nightingale, J. W.; Dye, S.; Massey, Richard J.

2018-05-01

This work presents AutoLens, the first entirely automated modeling suite for the analysis of galaxy-scale strong gravitational lenses. AutoLens simultaneously models the lens galaxy's light and mass whilst reconstructing the extended source galaxy on an adaptive pixel-grid. The method's approach to source-plane discretization is amorphous, adapting its clustering and regularization to the intrinsic properties of the lensed source. The lens's light is fitted using a superposition of Sersic functions, allowing AutoLens to cleanly deblend its light from the source. Single component mass models representing the lens's total mass density profile are demonstrated, which in conjunction with light modeling can detect central images using a centrally cored profile. Decomposed mass modeling is also shown, which can fully decouple a lens's light and dark matter and determine whether the two component are geometrically aligned. The complexity of the light and mass models are automatically chosen via Bayesian model comparison. These steps form AutoLens's automated analysis pipeline, such that all results in this work are generated without any user-intervention. This is rigorously tested on a large suite of simulated images, assessing its performance on a broad range of lens profiles, source morphologies and lensing geometries. The method's performance is excellent, with accurate light, mass and source profiles inferred for data sets representative of both existing Hubble imaging and future Euclid wide-field observations.

Occupational pressure-targeting organisational factors to ameliorate occupational dysfunction.

PubMed

Loh, Siew Yim; Than, Winn; Quek, Kia Fatt

2011-12-01

Chronic pressure at work has debilitating impact on healthcare employers (e.g. reduced productivity, high costs, poor patient care) and on female healthcare employees (e.g. sickness, dysfunction). This paper highlights relationship at work as the key occupational source of work-stress which is organisational in nature. A cross-sectional study (n = 230) was conducted using the Pressure Management Inventory on several female dominated health professions within a large public hospital. Analysis of variance was used to show relationship between sources and outcome of pressure. Linear regressions were used to predict which sources of pressure (IV) was linked to the outcomes of occupational pressure (DV). The number one source of occupational pressure is relationships at work (i.e. with supervisors), and not workload. 'Relationship' is also the key predictor of several negative outcomes of pressure at work. Analysis of variance showed significant differences in two sources of pressures, i.e. Workload (P = 0.04) and Home-work balance (P = 0.03). This paper provides insights into the occupational pressure of women health professionals by highlighting the organisational sources of pressure and the implications for preventing occupational dysfunction secondary to stress at work.

The Skinny on Success: Body Mass, Gender and Occupational Standing Across the Life Course

PubMed Central

Glass, Christy M.; Haas, Steven A.; Reither, Eric N.

2010-01-01

Several studies have analyzed the impact of obesity on occupational standing. This study extends previous research by estimating the influence of body mass on occupational attainment over three decades of the career using data from the Wisconsin Longitudinal Study. In a series of covariance structure analyses, we considered three mechanisms that may alter the career trajectories of heavy individuals: (1. employment-based discrimination, (2. educational attainment, and (3. marriage market processes. Unlike previous studies, we found limited evidence that employment-based discrimination impaired the career trajectories of either men or women. Instead, we found that heavy women received less post-secondary schooling than their thinner peers, which in turn adversely affected their occupational standing at each point in their careers. PMID:20936045

Evaluation of solid particle number and black carbon for very low particulate matter emissions standards in light-duty vehicles.

PubMed

Chang, M-C Oliver; Shields, J Erin

2017-06-01

To reliably measure at the low particulate matter (PM) levels needed to meet California's Low Emission Vehicle (LEV III) 3- and 1-mg/mile particulate matter (PM) standards, various approaches other than gravimetric measurement have been suggested for testing purposes. In this work, a feasibility study of solid particle number (SPN, d50 = 23 nm) and black carbon (BC) as alternatives to gravimetric PM mass was conducted, based on the relationship of these two metrics to gravimetric PM mass, as well as the variability of each of these metrics. More than 150 Federal Test Procedure (FTP-75) or Supplemental Federal Test Procedure (US06) tests were conducted on 46 light-duty vehicles, including port-fuel-injected and direct-injected gasoline vehicles, as well as several light-duty diesel vehicles equipped with diesel particle filters (LDD/DPF). For FTP tests, emission variability of gravimetric PM mass was found to be slightly less than that of either SPN or BC, whereas the opposite was observed for US06 tests. Emission variability of PM mass for LDD/DPF was higher than that of both SPN and BC, primarily because of higher PM mass measurement uncertainties (background and precision) near or below 0.1 mg/mile. While strong correlations were observed from both SPN and BC to PM mass, the slopes are dependent on engine technologies and driving cycles, and the proportionality between the metrics can vary over the course of the test. Replacement of the LEV III PM mass emission standard with one other measurement metric may imperil the effectiveness of emission reduction, as a correlation-based relationship may evolve over future technologies for meeting stringent greenhouse standards. Solid particle number and black carbon were suggested in place of PM mass for the California LEV III 1-mg/mile FTP standard. Their equivalence, proportionality, and emission variability in comparison to PM mass, based on a large light-duty vehicle fleet examined, are dependent on engine

Single particles measured by a light scattering module coupled to a time-of-flight aerosol mass spectrometer onboard the NOAA P-3 aircraft during SENEX

NASA Astrophysics Data System (ADS)

Liao, J.; Middlebrook, A. M.; Welti, A.; Sueper, D.; Murphy, D. M.

2014-12-01

Single particles in the eastern US were characterized by a light scattering module coupled to a time-of-flight aerosol mass spectrometer (LS-ToF-AMS) onboard the NOAA P-3 aircraft during the Southeastern Nexus (SENEX) campaign. Single particle data were collected for 30 seconds every 5 minutes. Aerosols larger than 200-300 nm in vacuum aerodynamic diameter can be optically detected by the 405 nm crystal laser and trigger the saving of single particle mass spectra. The measured single particles are internally-mixed as expected. The single particles were classified as prompt, delayed, and null based on the chemical ion signal arrival time difference between prediction from the light scattering signal and measurement by mass spectrometer and the presence or absence of a mass spectrum. On average the number fraction of particles detected as prompt, delayed, and null (no spectrum) is about 30%, 10%, and 60%. The number fraction of these three particle types varied with aerosol size, chemical composition and the investigation region and will be discussed in detail. For example, the number fraction of prompt particles was significantly higher for the flight to the Pennsylvania natural gas shale region on July 6, 2013, which is probably related to the chemical composition (more acidic) and phase of the ambient particles. These particle types and detection efficiency are related to the bouncing effect on the vaporizer and may provide insight into the non-unit AMS collection efficiency. Moreover, most of the particles larger than 800 nm in vacuum aerodynamic diameter sized with the traditional AMS PToF mode are delayed particles and their mass spectral signals appear to be affected by this process.

Probing neutrino coupling to a light scalar with coherent neutrino scattering

NASA Astrophysics Data System (ADS)

Farzan, Yasaman; Lindner, Manfred; Rodejohann, Werner; Xu, Xun-Jie

2018-05-01

Large neutrino event numbers in future experiments measuring coherent elastic neutrino nucleus scattering allow precision measurements of standard and new physics. We analyze the current and prospective limits of a light scalar particle coupling to neutrinos and quarks, using COHERENT and CONUS as examples. Both lepton number conserving and violating interactions are considered. It is shown that current (future) experiments can probe for scalar masses of a few MeV couplings down to the level of 10-4 (10-6). Scalars with masses around the neutrino energy allow to determine their mass via a characteristic spectrum shape distortion. Our present and future limits are compared with constraints from supernova evolution, Big Bang nucleosynthesis and neutrinoless double beta decay. We also outline UV-complete underlying models that include a light scalar with coupling to quarks for both lepton number violating and conserving coupling to neutrinos.

24 CFR 983.261 - When occupancy may exceed 25 percent cap on the number of PBV units in each building.

Code of Federal Regulations, 2010 CFR

2010-04-01

... percent cap on the number of PBV units in each building. 983.261 Section 983.261 Housing and Urban...) PROGRAM Occupancy § 983.261 When occupancy may exceed 25 percent cap on the number of PBV units in each... contract for contract units in excess of the 25 percent cap pursuant to § 983.56(a). (b) In referring...

Using SN 1987A light echoes to determine mass loss from the progenitor

NASA Technical Reports Server (NTRS)

Crotts, Arlin P. S.; Kunkel, William E.

1991-01-01

The hypothesis that the blue progenitor of SN 1987A passed through a blue supergiant phase ending with the expulsion of the outer envelope is tested. The many light echoes seen near SN 1987A were used to search for a mass flow from the progenitor and for abrupt density changes at the limits of this smooth mass flow. The progenitor needed roughly a million yr to create these structures, assuming a constant mass loss at 15 km/s. The dust in the region is small-grained and isotropically scattering. Interaction between the progenitor blue supergiant and red supergiant winds is probably contained within a roughly spherical structure 1.5 pc in diameter.

From light to baryonic mass: the effect of the stellar mass-to-light ratio on the Baryonic Tully-Fisher relation

NASA Astrophysics Data System (ADS)

Ponomareva, Anastasia A.; Verheijen, Marc A. W.; Papastergis, Emmanouil; Bosma, Albert; Peletier, Reynier F.

2018-03-01

In this paper, we investigate the statistical properties of the Baryonic Tully-Fisher relation (BTFr) for a sample of 32 galaxies with accurate distances based on Cepheïds and/or TRGB stars. We make use of homogeneously analysed photometry in 18 bands ranging from the far-ultraviolet to 160 μm, allowing us to investigate the effect of the inferred stellar mass-to-light ratio (ϒ⋆) on the statistical properties of the BTFr. Stellar masses of our sample galaxies are derived with four different methods based on full SED fitting, studies of stellar dynamics, near-infrared colours, and the assumption of the same Υ_{\\star }^{[3.6]} for all galaxies. In addition, we use high-quality, resolved H I kinematics to study the BTFr based on three kinematic measures: Wi_{50} from the global H I profile, and Vmax and Vflat from the rotation curve. We find the intrinsic perpendicular scatter, or tightness, of our BTFr to be σ⊥ = 0.026 ± 0.013 dex, consistent with the intrinsic tightness of the 3.6 μm luminosity-based Tully-Fisher relation (TFr). However, we find the slope of the BTFr to be 2.99 ± 0.2 instead of 3.7 ± 0.1 for the luminosity-based TFr at 3.6 μm. We use our BTFr to place important observational constraints on theoretical models of galaxy formation and evolution by making comparisons with theoretical predictions based on either the Λ cold dark matter framework or modified Newtonian dynamics.

Light extinction by fine atmospheric particles in the White Mountains region of New Hampshire and its relationship to air mass transport.

PubMed

Slater, John F; Dibb, Jack E; Keim, Barry D; Talbot, Robert W

2002-03-27

Chemical, optical, and physical measurements of fine aerosols (aerodynamic diameter < or = 2.5 microm) have been performed at a mountaintop location adjacent to the White Mountain National Forest in northern NH, USA. A 1-month long sampling campaign was conducted at Cranmore Mountain during spring 2000. We report on the apportionment of light extinction by fine aerosols into its major chemical components, and relationships between variations in aerosol parameters and changes in air mass origin. Filter-based, 24-h integrated samples were collected and analyzed for major inorganic ions, as well as organic (OC), elemental (EC), and total carbon. Light scattering and light absorption coefficients were measured at 5-min intervals using an integrating nephelometer and a light absorption photometer. Fine particle number density was measured with a condensation particle counter. Air mass origins and transport patterns were investigated through the use of 3-day backward trajectories and a synoptic climate classification system. Two distinct transport regimes were observed: (1) flow from the north/northeast (N/NE) occurred during 9 out of 18 sample-days; and (2) flow from the west/southwest (W/SW) occurred 8 out of 18 sample-days. All measured and derived aerosol and meteorological parameters were separated into two categories based on these different flow scenarios. During W/SW flow, higher values of aerosol chemical concentration, absorption and scattering coefficients, number density, and haziness were observed compared to N/NE flow. The highest level of haziness was associated with the climate classification Frontal Atlantic Return, which brought polluted air into the region from the mid-Atlantic corridor. Fine particle mass scattering efficiencies of (NH4)2SO4 and OC were 5.35 +/- 0.42 m2 g(-1) and 1.56 +/- 0.40 m2 g(-1), respectively, when transport was out of the N/NE. When transport was from the W/SW the values were 4.94 +/- 0.68 m2 g(-1) for (NH4)2SO4 and 2.18 +/- 0

Galaxy and mass assembly (GAMA): the consistency of GAMA and WISE derived mass-to-light ratios

NASA Astrophysics Data System (ADS)

Kettlety, T.; Hesling, J.; Phillipps, S.; Bremer, M. N.; Cluver, M. E.; Taylor, E. N.; Bland-Hawthorn, J.; Brough, S.; De Propris, R.; Driver, S. P.; Holwerda, B. W.; Kelvin, L. S.; Sutherland, W.; Wright, A. H.

2018-01-01

Recent work has suggested that mid-IR wavelengths are optimal for estimating the mass-to-light ratios of stellar populations and hence the stellar masses of galaxies. We compare stellar masses deduced from spectral energy distribution (SED) models, fitted to multiwavelength optical-NIR photometry, to luminosities derived from WISE photometry in the W1 and W2 bands at 3.6 and 4.5 μm for non-star forming galaxies. The SED-derived masses for a carefully selected sample of low-redshift (z ≤ 0.15) passive galaxies agree with the prediction from stellar population synthesis models such that M*/LW1 ≃ 0.6 for all such galaxies, independent of other stellar population parameters. The small scatter between masses predicted from the optical SED and from the WISE measurements implies that random errors (as opposed to systematic ones such as the use of different initial mass functions) are smaller than previous, deliberately conservative, estimates for the SED fits. This test is subtly different from simultaneously fitting at a wide range of optical and mid-IR wavelengths, which may just generate a compromised fit: we are directly checking that the best-fitting model to the optical data generates an SED whose M*/LW1 is also consistent with separate mid-IR data. We confirm that for passive low-redshift galaxies a fixed M*/LW1 = 0.65 can generate masses at least as accurate as those obtained from more complex methods. Going beyond the mean value, in agreement with expectations from the models, we see a modest change in M*/LW1 with SED fitted stellar population age but an insignificant one with metallicity.

Connected and leading disconnected hadronic light-by-light contribution to the muon anomalous magnetic moment with a physical pion mass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blum, Thomas; Christ, Norman; Hayakawa, Masashi

We report a lattice QCD calculation of the hadronic light-by-light contribution to the muon anomalous magnetic moment at a physical pion mass. The calculation includes the connected diagrams and the leading, quark-line-disconnected diagrams. We incorporate algorithmic improvements developed in our previous work. The calculation was performed on the 48 3 × 96 ensemble generated with a physical pion mass and a 5.5 fm spatial extent by the RBC and UKQCD Collaborations using the chiral, domain wall fermion formulation. We find a HLbL μ = 5.35(1.35) × 10 –10, where the error is statistical only. The finite-volume and finite lattice-spacing errorsmore » could be quite large and are the subject of ongoing research. Finally, the omitted disconnected graphs, while expected to give a correction of order 10%, also need to be computed.« less

Connected and leading disconnected hadronic light-by-light contribution to the muon anomalous magnetic moment with a physical pion mass

DOE PAGES

Blum, Thomas; Christ, Norman; Hayakawa, Masashi; ...

2017-01-11

We report a lattice QCD calculation of the hadronic light-by-light contribution to the muon anomalous magnetic moment at a physical pion mass. The calculation includes the connected diagrams and the leading, quark-line-disconnected diagrams. We incorporate algorithmic improvements developed in our previous work. The calculation was performed on the 48 3 × 96 ensemble generated with a physical pion mass and a 5.5 fm spatial extent by the RBC and UKQCD Collaborations using the chiral, domain wall fermion formulation. We find a HLbL μ = 5.35(1.35) × 10 –10, where the error is statistical only. The finite-volume and finite lattice-spacing errorsmore » could be quite large and are the subject of ongoing research. Finally, the omitted disconnected graphs, while expected to give a correction of order 10%, also need to be computed.« less

Occupational cancer in Britain. Preventing occupational cancer.

PubMed

Chen, Yiqun; Osman, John

2012-06-19

Although only a relatively small proportion of cancer is attributable to occupational exposure to carcinogenic agents, the estimated number of deaths due to occupational cancer is high when compared to other deaths due to work-related ill health and injury. However, risk from occupational exposure to carcinogens can be minimised through proportionate but effective risk management. The Health and Safety Executive (HSE) is the regulator of workplace health and safety in Great Britain. As part of its aim to reduce ill health arising from failures to control properly exposure to hazards at work, HSE commissioned the research presented elsewhere in this supplement to enable it to identify priorities for preventing occupational cancer. The research has shown that occupational cancer remains a key health issue and that low-level exposure of a large number of workers to carcinogens is important. The finding that a small number of carcinogens have been responsible for the majority of the burden of occupational cancer provides key evidence in the development of priorities for significant reduction of occupational cancer. Although the research presented in this supplement reflects the consequences of past exposures to carcinogens, occupational cancer remains a problem. The potential for exposure to the agents considered in this research is still present in the workplace and the findings are relevant to prevention of future disease. In this article, the principle approaches for risk reduction are described. It provides supporting information on some of the initiatives already being undertaken, or those being put in place, to reduce occupational cancer in Great Britain. The need also for systematic collection of exposure information and the importance of raising awareness and changing behaviours are discussed.

Application of an extended random-phase approximation to giant resonances in light-, medium-, and heavy-mass nuclei

NASA Astrophysics Data System (ADS)

Tselyaev, V.; Lyutorovich, N.; Speth, J.; Krewald, S.; Reinhard, P.-G.

2016-09-01

We present results of the time blocking approximation (TBA) for giant resonances in light-, medium-, and heavy-mass nuclei. The TBA is an extension of the widely used random-phase approximation (RPA) adding complex configurations by coupling to phonon excitations. A new method for handling the single-particle continuum is developed and applied in the present calculations. We investigate in detail the dependence of the numerical results on the size of the single-particle space and the number of phonons as well as on nuclear matter properties. Our approach is self-consistent, based on an energy-density functional of Skyrme type where we used seven different parameter sets. The numerical results are compared with experimental data.

Rotation curves of galaxies and the stellar mass-to-light ratio

NASA Astrophysics Data System (ADS)

Haghi, Hosein; Khodadadi, Aziz; Ghari, Amir; Zonoozi, Akram Hasani; Kroupa, Pavel

2018-03-01

Mass models of a sample of 171 low- and high-surface brightness galaxies are presented in the context of the cold dark matter (CDM) theory using the NFW dark matter halo density distribution to extract a new concentration-viral mass relation (c - Mvir). The rotation curves (RCs) are calculated from the total baryonic matter based on the 3.6 μm-band surface photometry, the observed distribution of neutral hydrogen, and the dark halo, in which the three adjustable parameters are the stellar mass-to-light ratio, halo concentration and virial mass. Although accounting for a NFW dark halo profile can explain rotation curve observations, the implied c - Mvir relation from RC analysis strongly disagrees with that resulting from different cosmological simulations. Also, the M/L -color correlation of the studied galaxies is inconsistent with that expected from stellar population synthesis models with different stellar initial mass functions. Moreover, we show that the best-fitting stellar M/L - ratios of 51 galaxies (30% of our sample) have unphysically negative values in the framework of the ΛCDM theory. This can be interpreted as a serious crisis for this theory. This suggests either that the commonly used NFW halo profile, which is a natural result of ΛCDM cosmological structure formation, is not an appropriate profile for the dark halos of galaxies, or, new dark matter physics or alternative gravity models are needed to explain the rotational velocities of disk galaxies.

Rotation curves of galaxies and the stellar mass-to-light ratio

NASA Astrophysics Data System (ADS)

Haghi, Hosein; Khodadadi, Aziz; Ghari, Amir; Zonoozi, Akram Hasani; Kroupa, Pavel

2018-07-01

Mass models of a sample of 171 low- and high-surface brightness galaxies are presented in the context of the cold dark matter (CDM) theory using the NFW dark matter halo density distribution to extract a new concentration-viral mass relation (c-Mvir). The rotation curves (RCs) are calculated from the total baryonic matter based on the 3.6 μm-band surface photometry, the observed distribution of neutral hydrogen, and the dark halo, in which the three adjustable parameters are the stellar mass-to-light ratio, halo concentration, and virial mass. Although accounting for a NFW dark halo profile can explain RC observations, the implied c-Mvir relation from RC analysis strongly disagrees with that resulting from different cosmological simulations. Also, the M/L-colour correlation of the studied galaxies is inconsistent with that expected from stellar population synthesis models with different stellar initial mass functions. Moreover, we show that the best-fitting stellar M/L ratios of 51 galaxies (30 per cent of our sample) have unphysically negative values in the framework of the ΛCDM theory. This can be interpreted as a serious crisis for this theory. This suggests either that the commonly used NFW halo profile, which is a natural result of ΛCDM cosmological structure formation, is not an appropriate profile for the dark haloes of galaxies, or, new dark matter physics or alternative gravity models are needed to explain the rotational velocities of disc galaxies.

Estimating occupancy and predicting numbers of gray wolf packs in Montana using hunter surveys

USGS Publications Warehouse

Rich, Lindsey N.; Russell, Robin E.; Glenn, Elizabeth M.; Mitchell, Michael S.; Gude, Justin A.; Podruzny, Kevin M.; Sime, Carolyn A.; Laudon, Kent; Ausband, David E.; Nichols, James D.

2013-01-01

Reliable knowledge of the status and trend of carnivore populations is critical to their conservation and management. Methods for monitoring carnivores, however, are challenging to conduct across large spatial scales. In the Northern Rocky Mountains, wildlife managers need a time- and cost-efficient method for monitoring gray wolf (Canis lupus) populations. Montana Fish, Wildlife and Parks (MFWP) conducts annual telephone surveys of >50,000 deer and elk hunters. We explored how survey data on hunters' sightings of wolves could be used to estimate the occupancy and distribution of wolf packs and predict their abundance in Montana for 2007–2009. We assessed model utility by comparing our predictions to MFWP minimum known number of wolf packs. We minimized false positive detections by identifying a patch as occupied if 2–25 wolves were detected by ≥3 hunters. Overall, estimates of the occupancy and distribution of wolf packs were generally consistent with known distributions. Our predictions of the total area occupied increased from 2007 to 2009 and predicted numbers of wolf packs were approximately 1.34–1.46 times the MFWP minimum counts for each year of the survey. Our results indicate that multi-season occupancy models based on public sightings can be used to monitor populations and changes in the spatial distribution of territorial carnivores across large areas where alternative methods may be limited by personnel, time, accessibility, and budget constraints.

Symmetry breaking in occupation number based slave-particle methods

NASA Astrophysics Data System (ADS)

Georgescu, Alexandru B.; Ismail-Beigi, Sohrab

2017-10-01

We describe a theoretical approach to finding spontaneously symmetry-broken electronic phases due to strong electronic interactions when using recently developed slave-particle (slave-boson) approaches based on occupation numbers. We describe why, to date, spontaneous symmetry breaking has proven difficult to achieve in such approaches. We then provide a total energy based approach for introducing auxiliary symmetry-breaking fields into the solution of the slave-particle problem that leads to lowered total energies for symmetry-broken phases. We point out that not all slave-particle approaches yield energy lowering: the slave-particle model being used must explicitly describe the degrees of freedom that break symmetry. Finally, our total energy approach permits us to greatly simplify the formalism used to achieve a self-consistent solution between spinon and slave modes while increasing the numerical stability and greatly speeding up the calculations.

Is a top-heavy initial mass function needed to reproduce the submillimetre galaxy number counts?

NASA Astrophysics Data System (ADS)

Safarzadeh, Mohammadtaher; Lu, Yu; Hayward, Christopher C.

2017-12-01

Matching the number counts and redshift distribution of submillimetre galaxies (SMGs) without invoking modifications to the initial mass ffunction (IMF) has proved challenging for semi-analytic models (SAMs) of galaxy formation. We adopt a previously developed SAM that is constrained to match the z = 0 galaxy stellar mass function and makes various predictions which agree well with observational constraints; we do not recalibrate the SAM for this work. We implement three prescriptions to predict the submillimetre flux densities of the model galaxies; two depend solely on star formation rate, whereas the other also depends on the dust mass. By comparing the predictions of the models, we find that taking into account the dust mass, which affects the dust temperature and thus influences the far-infrared spectral energy distribution, is crucial for matching the number counts and redshift distribution of SMGs. Moreover, despite using a standard IMF, our model can match the observed SMG number counts and redshift distribution reasonably well, which contradicts the conclusions of some previous studies that a top-heavy IMF, in addition to taking into account the effect of dust mass, is needed to match these observations. Although we have not identified the key ingredient that is responsible for our model matching the observed SMG number counts and redshift distribution without IMF variation - which is challenging given the different prescriptions for physical processes employed in the SAMs of interest - our results demonstrate that in SAMs, IMF variation is degenerate with other physical processes, such as stellar feedback.

Occupational Titles Including Job Descriptions for Health Occupations Education.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This alphabetical compilation of 80 occupational titles for health occupations education is taken from the Dictionary of Occupational Titles, (DOT), 4th edition, 1977. An index shows the arrangement of the occupational titles (together with instructional program and DOT code) according to the United States Office of Education code numbers. For…

Chronic cough due to occupational factors

PubMed Central

Groneberg, David A; Nowak, Dennis; Wussow, Anke; Fischer, Axel

2006-01-01

Within the large variety of subtypes of chronic cough, either defined by their clinical or pathogenetic causes, occupational chronic cough may be regarded as one of the most preventable forms of the disease. Next to obstructive airway diseases such as asthma or chronic obstructive pulmonary disease, which are sometimes concomitant with chronic cough, this chronic airway disease gains importance in the field of occupational medicine since classic fiber-related occupational airway diseases will decrease in the future. Apart from acute accidents and incidental exposures which may lead to an acute form of cough, there are numerous sources for the development of chronic cough within the workplace. Over the last years, a large number of studies has focused on occupational causes of respiratory diseases and it has emerged that chronic cough is one of the most prevalent work-related airway diseases. Best-known examples of occupations related to the development of cough are coal miners, hard-rock miners, tunnel workers, or concrete manufacturing workers. As chronic cough is often based on a variety of non-occupational factors such as tobacco smoke, a distinct separation into either occupational or personally -evoked can be difficult. However, revealing the occupational contribution to chronic cough and to the symptom cough in general, which is the commonest cause for the consultation of a physician, can significantly lead to a reduction of the socioeconomic burden of the disease. PMID:16722562

[Occupational health and safety management systems: scenarios and perspectives for occupational physicians].

PubMed

Santantonio, P; Casciani, M; Bartolucci, G B

2008-01-01

This paper analyzes the role of the occupational physicians, taking into account the new Italian legislation within the frame of CSR, that puts in a new light the physicians inside the Organizations. In this context, Occupational Medicine and Workplace Health Promotion play a central role in most of the items of the Occupational Health and safety management systems, from H&S politics to training, from First Aid to audit and revision systems. From this innovative perspective, the authors try to identify the occupational physician's new challenges and opportunities.

Single particle characterization using a light scattering module coupled to a time-of-flight aerosol mass spectrometer

NASA Astrophysics Data System (ADS)

Cross, E. S.; Onasch, T. B.; Canagaratna, M.; Jayne, J. T.; Kimmel, J.; Yu, X.-Y.; Alexander, M. L.; Worsnop, D. R.; Davidovits, P.

2008-12-01

We present the first single particle results obtained using an Aerodyne time-of-flight aerosol mass spectrometer coupled with a light scattering module (LS-ToF-AMS). The instrument was deployed at the T1 ground site approximately 40 km northeast of the Mexico City Metropolitan Area (MCMA) as part of the MILAGRO field study in March of 2006. The instrument was operated as a standard AMS from 12-30 March, acquiring average chemical composition and size distributions for the ambient aerosol, and in single particle mode from 27-30 March. Over a 75-h sampling period, 12 853 single particle mass spectra were optically triggered, saved, and analyzed. The correlated optical and chemical detection allowed detailed examination of single particle collection and quantification within the LS-ToF-AMS. The single particle data enabled the mixing states of the ambient aerosol to be characterized within the context of the size-resolved ensemble chemical information. The particulate mixing states were examined as a function of sampling time and most of the particles were found to be internal mixtures containing many of the organic and inorganic species identified in the ensemble analysis. The single particle mass spectra were deconvolved, using techniques developed for ensemble AMS data analysis, into HOA, OOA, NH4NO3, (NH4)2SO4, and NH4Cl fractions. Average single particle mass and chemistry measurements are shown to be in agreement with ensemble MS and PTOF measurements. While a significant fraction of ambient particles were internal mixtures of varying degrees, single particle measurements of chemical composition allowed the identification of time periods during which the ambient ensemble was externally mixed. In some cases the chemical composition of the particles suggested a likely source. Throughout the full sampling period, the ambient ensemble was an external mixture of combustion-generated HOA particles from local sources (e.g. traffic), with number concentrations peaking

Occupational exposure to phthalates in relation to gender, consumer practices and body composition.

PubMed

Petrovičová, Ida; Kolena, Branislav; Šidlovská, Miroslava; Pilka, Tomáš; Wimmerová, Soňa; Trnovec, Tomáš

2016-12-01

The aim of our work was to find associations between urinary phthalate metabolite concentrations and occupation, consumer practices and body composition. We divided our cohort (n = 129) into occupationally exposed subjects, community service workers (group A; n = 45) and workers from plastic industry (group B; n = 35) and group of general population (control group C, n = 49). To estimate levels of five phthalate metabolites, we used high-performance liquid chromatography and tandem mass spectrometry analysis. We found in plastic industry workers compared to community service workers and subjects of the control group significantly higher urinary concentration mono (2-ethyl-5-hydroxyhexyl) phthalate (MEHHP), mono (2-ethyl-5-oxohexyl) phthalate (MEOHP), mono (2-etylhexyl) phthalate (MEHP), sum di-(2-ethyl-5-oxohexyl) phthalate (DEHP), mono-iso-butyl phthalate (MiBP) and mono-n-butyl phthalate (MnBP). We identified by multivariate analysis of covariance inverse relationship between MEHP and body parameters as waist-to-height ratio, body mass index, waist-to-hip ratio, hip circumference and waist circumference among females, whereas in males, no significant association was found. Results of our study show, despite of variability in terms of occupational exposure to phthalates, that plastic manufactory represents a higher occupational risk in comparison with waste management. The differences in anthropometric parameters between the two occupationally exposed groups and the general population are suggesting a detrimental effect of occupational exposure on body weight homeostasis.

Coupling a versatile aerosol apparatus to a synchrotron: Vacuum ultraviolet light scattering, photoelectron imaging, and fragment free mass spectrometry

NASA Astrophysics Data System (ADS)

Shu, Jinian; Wilson, Kevin R.; Ahmed, Musahid; Leone, Stephen R.

2006-04-01

An aerosol apparatus has been coupled to the Chemical Dynamics Beamline of the Advanced Light Source at Lawrence Berkeley National Laboratory. This apparatus has multiple capabilities for aerosol studies, including vacuum ultraviolet (VUV) light scattering, photoelectron imaging, and mass spectroscopy of aerosols. By utilizing an inlet system consisting of a 200μm orifice nozzle and aerodynamic lenses, aerosol particles of ˜50nm-˜1μm in diameter can be sampled directly from atmospheric pressure. The machine is versatile and can probe carbonaceous aerosols generated by a laboratory flame, nebulized solutions of biological molecules, hydrocarbon aerosol reaction products, and synthesized inorganic nanoparticles. The sensitivity of this apparatus is demonstrated by the detection of nanoparticles with VUV light scattering, photoelectron imaging, and charged particle detection. In addition to the detection of nanoparticles, the thermal vaporization of aerosols on a heater tip leads to the generation of intact gas phase molecules. This phenomenon coupled to threshold single photon ionization, accessible with tunable VUV light, allows for fragment-free mass spectrometry of complex molecules. The initial experiments with light scattering, photoelectron imaging, and aerosol mass spectrometry reported here serve as a demonstration of the design philosophy and multiple capabilities of the apparatus.

Determination of the Charon/Pluto Mass Ratio from Center-of-Light Astrometry

NASA Technical Reports Server (NTRS)

Foust, Jeffrey A.; Elliot, J. L.; Olkin, Catherine B.; McDonald, Stephen W.; Dunham, Edward W.; Stone, Remington P. S.; McDonald, John S.; Stone, Ronald C.

1997-01-01

The Charon/Pluto mass ratio is a fundamental but poorly known parameter of the two-body system. Previous values for the mass ratio have ranged from 0.0837 plus or minus 0.0147 (Null et al., 1993, Astron. J. 105, 2319-2335) to 0.1566 plus or minus 0.0035 (Young et al., 1994, Icarus 108,186-199). We report here a new determination of the Charon/Pluto mass ratio, using five sets of groundbased images taken at four sites in support of Pluto occultation predictions. Unlike the Null et al. and Young et A determinations, where the centers of light for Pluto and Charon could be determined separately, this technique examines the motion of the center of light of the blended Pluto-Charon image. We compute the offsets of the observed center-of-light position of Pluto-Charon from the ephemeris position of the system and fit these offsets to a model of the Pluto-Charon system. The least-squares fits to the five data sets agree within their errors, and the weighted mean mass ratio is 0.117 plus or minus 0.006. The effects of errors in the Charon light fraction, semimajor axis, and ephemeris have been examined and are equal to only a small fraction of the formal error from the fit. This result is intermediate between those of Null et al., and Young et al. and matches a new value of 0.124 plus or minus 0.008 by Null and Owen (1996, Astron. J. 111, 1368-1381). The mass ratio and resulting individual masses and densities of Pluto and Charon are consistent with a collisional origin for the Pluto-Charon system.

Fatal Attraction of Short-Tailed Shearwaters to Artificial Lights

PubMed Central

Rodríguez, Airam; Burgan, Graeme; Dann, Peter; Jessop, Roz; Negro, Juan J.; Chiaradia, Andre

2014-01-01

Light pollution is increasing around the world and altering natural nightscapes with potential ecological and evolutionary consequences. A severe ecological perturbation caused by artificial lights is mass mortalities of organisms, including seabird fledglings that are attracted to lights at night on their first flights to the sea. Here, we report on the number of fledging short-tailed shearwaters Ardenna tenuirostris found grounded in evening and morning rescue patrols conducted at Phillip Island, Australia, during a 15-year period (1999–2013). We assessed factors affecting numbers of grounded birds and mortality including date, moon phase, wind direction and speed, number of visitors and holiday periods. We also tested experimentally if birds were attracted to lights by turning the lights off on a section of the road. Of 8871 fledglings found, 39% were dead or dying. This mortality rate was 4–8 times higher than reported elsewhere for other shearwater species, probably because searching for fledglings was part of our systematic rescue effort rather than the opportunistic rescue used elsewhere. Thus, it suggests that light-induced mortality of seabirds is usually underestimated. We rescued more birds (dead and alive) in peak fledging, moonless and windy nights. Mortality increased through the fledging period, in the mornings and with increased traffic on holiday periods. Turning the road lights off decreased the number of grounded birds (dead and alive). While moon, wind and time are uncontrolled natural constraints, we demonstrated that reduction of light pollution and better traffic management can mitigate artificial light-induced mortality. PMID:25334014

Lighting: Green Light.

ERIC Educational Resources Information Center

Maniccia, Dorine

2003-01-01

Explains that by using sustainable (green) building practices, schools and universities can make their lighting systems more efficient, noting that embracing green design principles can help schools attract students. Discusses lighting-control technologies (occupancy sensing technology, daylighting technology, and scheduling based technologies),…

Classification Structures for Career Information. Occupational Statements, Volume I. Part 1. SOC Numbers 1099 to 4490. Interim Edition.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

"Classification Structures for Career Information" was created to provide Career Information Delivery Systems (CIDS) staff with pertinent and useful occupational information arranged according to the Standard Occupational Classification (SOC) structure. Through this publication, the National Occupational Information Coordinating…

Classification Structures for Career Information. Occupational Statements, Volume I. Part 2. SOC Numbers 4499 to 6560. Interim Edition.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

"Classification Structures for Career Information" was created to provide Career Information Delivery Systems (CIDS) staff with pertinent and useful occupational information arranged according to the Standard Occupational Classification (SOC) structure. Through this publication, the National Occupational Information Coordinating…

Classification Structures for Career Information. Occupational Statements, Volume I. Part 3. SOC Numbers 6699 to 9900. Interim Edition.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

"Classification Structures for Career Information" was created to provide Career Information Delivery Systems (CIDS) staff with pertinent and useful occupational information arranged according to the Standard Occupational Classification (SOC) structure. Through this publication, the National Occupational Information Coordinating…

Occupant-to-occupant contact injury in motor vehicle crashes.

PubMed

Viano, David C; Parenteau, Chantal S

2017-10-03

This is a descriptive study of the frequency and risk of occupant-to-occupant contact injury by crash type and occupant age. It focused on rear impacts because of a recent Senate inquiry. 1994-2013 NASS-CDS data were used to investigate the effects of occupant-to-occupant contact on the risk of serious-to-fatal injury (Abbreviated Injury Scale [AIS] 3+) by crash type and age group. NASS-CDS in-depth cases were analyzed to identify crash circumstances for AIS 3+ occupant-to-occupant contact injury in rear crashes. Serious injury (AIS 3+) due to occupant-to-occupant contact was uncommon. It represented only 0.84% of all AIS 3+ injury for all age groups. The overall risk of AIS 3+ occupant-to-occupant contact injury was 0.042 ± 0.007%. The highest incidence was in side impacts (69.8%) followed by rollovers (22.9%). Occupant-to-occupant contact injury risk was lower in rear impacts than in other crash types, at 0.0078 ± 0.0054%. The highest risk of AIS 3+ injury with occupant-to-occupant was for the <9-year-old age group when compared to other age groups for all crash types. The risk was 0.051 ± 0.026%, representing 2.69% of all AIS 3+ injury in the <9-year-old age group. Only 4.2% of AIS 3+ occupant-to-occupant contact injury occurred to children <9 years old in rear impacts. The corresponding injury risk was lowest in rear impacts, at 0.014 ± 0.014%%, when compared to other crash types. The analysis of in-depth NASS-CDS cases of occupant-to-occupant contact injury in children< 9 years old involved in rear impacts identified very severe collisions in older model vehicles with deformation of the occupant compartment and yielding front seats as main factors for the contact injury. Front seat occupants injuring rear-seated children was not identified in the in-depth NASS-CDS cases. AIS 3+ occupant-to-occupant contact injury occurs primarily in side impacts and rollovers. Most contact injury is to adults (89.4% incidence). Occupant-to-occupant contact injury to

Chronic intermittent high altitude exposure, occupation, and body mass index in workers of mining industry.

PubMed

Esenamanova, Marina K; Kochkorova, Firuza A; Tsivinskaya, Tatyana A; Vinnikov, Denis; Aikimbaev, Kairgeldy

2014-09-01

The obesity and overweight rates in population exposed to chronic intermittent exposure to high altitudes are not well studied. The aim of the retrospective study was to evaluate whether there are differences in body mass index in different occupation groups working in intermittent shifts at mining industry at high altitude: 3800-4500 meters above sea level. Our study demonstrated that obesity and overweight are common in workers of high altitude mining industry exposed to chronic intermittent hypoxia. The obesity rate was lowest among miners as compared to blue- and white-collar employees (9.5% vs. 15.6% and 14.7%, p=0.013). Obesity and overweight were associated with older age, higher rates of increased blood pressure (8.79% and 5.72% vs. 1.92%), cholesterol (45.8% and 45.6% vs. 32.8%) and glucose (4.3% and 1.26% vs. 0.57%) levels as compared to normal body mass index category (p<0.0001 for all). There were differences in patterns of cholesterol and glucose levels in men and women employees according to occupation type. In conclusion, obesity and overweight rates are prevalent and associated with increase in blood pressure, cholesterol, and glucose levels in workers of mining industry exposed to intermittent high-altitude hypoxia. Therefore, assessment and monitoring of body mass index seems to be essential in those who live and work at high altitudes to supply the correct nutrition, modify risk factors, and prevent related disorders.

Development of vacuum ultraviolet absorption spectroscopy system for wide measurement range of number density using a dual-tube inductively coupled plasma light source

NASA Astrophysics Data System (ADS)

Kuwahara, Akira; Matsui, Makoto; Yamagiwa, Yoshiki

2012-12-01

A vacuum ultraviolet absorption spectroscopy system for a wide measurement range of atomic number densities is developed. Dual-tube inductively coupled plasma was used as a light source. The probe beam profile was optimized for the target number density range by changing the mass flow rate of the inner and outer tubes. This system was verified using cold xenon gas. As a result, the measurement number density range was extended from the conventional two orders to five orders of magnitude.

Event Detection Using Mobile Phone Mass GPS Data and Their Reliavility Verification by Dmsp/ols Night Light Image

NASA Astrophysics Data System (ADS)

Yuki, Akiyama; Satoshi, Ueyama; Ryosuke, Shibasaki; Adachi, Ryuichiro

2016-06-01

In this study, we developed a method to detect sudden population concentration on a certain day and area, that is, an "Event," all over Japan in 2012 using mass GPS data provided from mobile phone users. First, stay locations of all phone users were detected using existing methods. Second, areas and days where Events occurred were detected by aggregation of mass stay locations into 1-km-square grid polygons. Finally, the proposed method could detect Events with an especially large number of visitors in the year by removing the influences of Events that occurred continuously throughout the year. In addition, we demonstrated reasonable reliability of the proposed Event detection method by comparing the results of Event detection with light intensities obtained from the night light images from the DMSP/OLS night light images. Our method can detect not only positive events such as festivals but also negative events such as natural disasters and road accidents. These results are expected to support policy development of urban planning, disaster prevention, and transportation management.

Mass-polariton theory of light in dispersive media

NASA Astrophysics Data System (ADS)

Partanen, Mikko; Tulkki, Jukka

2017-12-01

We have recently shown that the electromagnetic pulse in a medium is made of mass-polariton (MP) quasiparticles, which are quantized coupled states of the field and an atomic mass density wave (MDW) [M. Partanen et al., Phys. Rev. A 95, 063850 (2017), 10.1103/PhysRevA.95.063850]. In this work, we generalize the MP theory of light for dispersive media assuming that absorption and scattering losses are very small. Following our previous work, we present two different approaches to the coupled state of light: (1) the MP quasiparticle theory, which is derived by only using the fundamental conservation laws and the Lorentz transformation; (2) the classical optoelastic continuum dynamics (OCD), which is a generalization of the electrodynamics of continuous media to include the dynamics of the medium under the influence of optical forces. We show that the total momentum and the transferred mass of the light pulse can be determined in a straightforward way if we know the field energy of the pulse and the dispersion relation of the medium. In analogy to the nondispersive case, we also find unambiguous correspondence between the MP and OCD theories. For the coupled MP state of a single photon and the medium, we obtain the total MP momentum pMP=npℏ ω /c , where np is the phase refractive index. The field's share of the MP momentum is equal to pfield=ℏ ω /(ngc ) , where ng is the group refractive index and the share of the MDW is equal to pMDW=pMP-pfield . Thus, as in a nondispersive medium, the total momentum of the MP is equal to the Minkowski momentum and the field's share of the momentum is equal to the Abraham momentum. We also show that the correspondence between the MP and OCD models and the conservation of momentum at interfaces gives an unambiguous formula for the optical force. The dynamics of the light pulse and the related MDW lead to nonequilibrium of the medium and to relaxation of the atomic density by sound waves in the same way as for nondispersive media

The estimated effect of mass or footprint reduction in recent light-duty vehicles on U.S. societal fatality risk per vehicle mile traveled.

PubMed

Wenzel, Tom

2013-10-01

The National Highway Traffic Safety Administration (NHTSA) recently updated its 2003 and 2010 logistic regression analyses of the effect of a reduction in light-duty vehicle mass on US societal fatality risk per vehicle mile traveled (VMT; Kahane, 2012). Societal fatality risk includes the risk to both the occupants of the case vehicle as well as any crash partner or pedestrians. The current analysis is the most thorough investigation of this issue to date. This paper replicates the Kahane analysis and extends it by testing the sensitivity of his results to changes in the definition of risk, and the data and control variables used in the regression models. An assessment by Lawrence Berkeley National Laboratory (LBNL) indicates that the estimated effect of mass reduction on risk is smaller than in Kahane's previous studies, and is statistically non-significant for all but the lightest cars (Wenzel, 2012a). The estimated effects of a reduction in mass or footprint (i.e. wheelbase times track width) are small relative to other vehicle, driver, and crash variables used in the regression models. The recent historical correlation between mass and footprint is not so large to prohibit including both variables in the same regression model; excluding footprint from the model, i.e. allowing footprint to decrease with mass, increases the estimated detrimental effect of mass reduction on risk in cars and crossover utility vehicles (CUVs)/minivans, but has virtually no effect on light trucks. Analysis by footprint deciles indicates that risk does not consistently increase with reduced mass for vehicles of similar footprint. Finally, the estimated effects of mass and footprint reduction are sensitive to the measure of exposure used (fatalities per induced exposure crash, rather than per VMT), as well as other changes in the data or control variables used. It appears that the safety penalty from lower mass can be mitigated with careful vehicle design, and that manufacturers can

Exquisite Nova Light Curves from the Solar Mass Ejection Imager (SMEI)

NASA Astrophysics Data System (ADS)

Hounsell, R.; Bode, M. F.; Hick, P. P.; Buffington, A.; Jackson, B. V.; Clover, J. M.; Shafter, A. W.; Darnley, M. J.; Mawson, N. R.; Steele, I. A.; Evans, A.; Eyres, S. P. S.; O'Brien, T. J.

2010-11-01

We present light curves of three classical novae (CNe; KT Eridani, V598 Puppis, V1280 Scorpii) and one recurrent nova (RS Ophiuchi) derived from data obtained by the Solar Mass Ejection Imager (SMEI) on board the Coriolis satellite. SMEI provides near complete skymap coverage with precision visible-light photometry at 102 minute cadence. The light curves derived from these skymaps offer unprecedented temporal resolution around, and especially before, maximum light, a phase of the eruption normally not covered by ground-based observations. They allow us to explore fundamental parameters of individual objects including the epoch of the initial explosion, the reality and duration of any pre-maximum halt (found in all three fast novae in our sample), the presence of secondary maxima, speed of decline of the initial light curve, plus precise timing of the onset of dust formation (in V1280 Sco) leading to estimation of the bolometric luminosity, white dwarf mass, and object distance. For KT Eri, Liverpool Telescope SkyCamT data confirm important features of the SMEI light curve and overall our results add weight to the proposed similarities of this object to recurrent rather than to CNe. In RS Oph, comparison with hard X-ray data from the 2006 outburst implies that the onset of the outburst coincides with extensive high-velocity mass loss. It is also noted that two of the four novae we have detected (V598 Pup and KT Eri) were only discovered by ground-based observers weeks or months after maximum light, yet these novae reached peak magnitudes of 3.46 and 5.42, respectively. This emphasizes the fact that many bright novae per year are still overlooked, particularly those of the very fast speed class. Coupled with its ability to observe novae in detail even when relatively close to the Sun in the sky, we estimate that as many as five novae per year may be detectable by SMEI.

Light at night increases body mass by shifting the time of food intake

PubMed Central

Fonken, Laura K.; Workman, Joanna L.; Walton, James C.; Weil, Zachary M.; Morris, John S.; Haim, Abraham; Nelson, Randy J.

2010-01-01

The global increase in the prevalence of obesity and metabolic disorders coincides with the increase of exposure to light at night (LAN) and shift work. Circadian regulation of energy homeostasis is controlled by an endogenous biological clock that is synchronized by light information. To promote optimal adaptive functioning, the circadian clock prepares individuals for predictable events such as food availability and sleep, and disruption of clock function causes circadian and metabolic disturbances. To determine whether a causal relationship exists between nighttime light exposure and obesity, we examined the effects of LAN on body mass in male mice. Mice housed in either bright (LL) or dim (DM) LAN have significantly increased body mass and reduced glucose tolerance compared with mice in a standard (LD) light/dark cycle, despite equivalent levels of caloric intake and total daily activity output. Furthermore, the timing of food consumption by DM and LL mice differs from that in LD mice. Nocturnal rodents typically eat substantially more food at night; however, DM mice consume 55.5% of their food during the light phase, as compared with 36.5% in LD mice. Restricting food consumption to the active phase in DM mice prevents body mass gain. These results suggest that low levels of light at night disrupt the timing of food intake and other metabolic signals, leading to excess weight gain. These data are relevant to the coincidence between increasing use of light at night and obesity in humans. PMID:20937863

Physicochemical characteristics and occupational exposure to coarse, fine and ultrafine particles during building refurbishment activities

NASA Astrophysics Data System (ADS)

Azarmi, Farhad; Kumar, Prashant; Mulheron, Mike; Colaux, Julien L.; Jeynes, Chris; Adhami, Siavash; Watts, John F.

2015-08-01

Understanding of the emissions of coarse (PM10 ≤10 μm), fine (PM2.5 ≤2.5 μm) and ultrafine particles (UFP <100 nm) from refurbishment activities and their dispersion into the nearby environment is of primary importance for developing efficient risk assessment and management strategies in the construction and demolition industry. This study investigates the release, occupational exposure and physicochemical properties of particulate matter, including UFPs, from over 20 different refurbishment activities occurring at an operational building site. Particles were measured in the 5-10,000-nm-size range using a fast response differential mobility spectrometer and a GRIMM particle spectrometer for 55 h over 8 days. The UFPs were found to account for >90 % of the total particle number concentrations and <10 % of the total mass concentrations released during the recorded activities. The highest UFP concentrations were 4860, 740, 650 and 500 times above the background value during wall-chasing, drilling, cementing and general demolition activities, respectively. Scanning electron microscopy, X-ray photoelectron spectroscopy and ion beam analysis were used to identify physicochemical characteristics of particles and attribute them to probable sources considering the size and the nature of the particles. The results confirm that refurbishment activities produce significant levels (both number and mass) of airborne particles, indicating a need to develop appropriate regulations for the control of occupational exposure of operatives undertaking building refurbishment.

Estimating fatality rates in occupational light vehicle users using vehicle registration and crash data.

PubMed

Stuckey, Rwth; LaMontagne, Anthony D; Glass, Deborah C; Sim, Malcolm R

2010-04-01

To estimate occupational light vehicle (OLV) fatality numbers using vehicle registration and crash data and compare these with previous estimates based on workers' compensation data. New South Wales (NSW) Roads and Traffic Authority (RTA) vehicle registration and crash data were obtained for 2004. NSW is the only Australian jurisdiction with mandatory work-use registration, which was used as a proxy for work-relatedness. OLV fatality rates based on registration data as the denominator were calculated and comparisons made with published 2003/04 fatalities based on workers' compensation data. Thirty-four NSW RTA OLV-user fatalities were identified, a rate of 4.5 deaths per 100,000 organisationally registered OLV, whereas the Australian Safety and Compensation Council (ASCC), reported 28 OLV deaths Australia-wide. More OLV user fatalities were identified from vehicle registration-based data than those based on workers' compensation estimates and the data are likely to provide an improved estimate of fatalities specific to OLV use. OLV-use is an important cause of traumatic fatalities that would be better identified through the use of vehicle-registration data, which provides a stronger evidence base from which to develop policy responses. © 2010 The Authors. Journal Compilation © 2010 Public Health Association of Australia.

Effects of Number of Animals Monitored on Representations of Cattle Group Movement Characteristics and Spatial Occupancy

PubMed Central

Liu, Tong; Green, Angela R.; Rodríguez, Luis F.; Ramirez, Brett C.; Shike, Daniel W.

2015-01-01

The number of animals required to represent the collective characteristics of a group remains a concern in animal movement monitoring with GPS. Monitoring a subset of animals from a group instead of all animals can reduce costs and labor; however, incomplete data may cause information losses and inaccuracy in subsequent data analyses. In cattle studies, little work has been conducted to determine the number of cattle within a group needed to be instrumented considering subsequent analyses. Two different groups of cattle (a mixed group of 24 beef cows and heifers, and another group of 8 beef cows) were monitored with GPS collars at 4 min intervals on intensively managed pastures and corn residue fields in 2011. The effects of subset group size on cattle movement characterization and spatial occupancy analysis were evaluated by comparing the results between subset groups and the entire group for a variety of summarization parameters. As expected, more animals yield better results for all parameters. Results show the average group travel speed and daily travel distances are overestimated as subset group size decreases, while the average group radius is underestimated. Accuracy of group centroid locations and group radii are improved linearly as subset group size increases. A kernel density estimation was performed to quantify the spatial occupancy by cattle via GPS location data. Results show animals among the group had high similarity of spatial occupancy. Decisions regarding choosing an appropriate subset group size for monitoring depend on the specific use of data for subsequent analysis: a small subset group may be adequate for identifying areas visited by cattle; larger subset group size (e.g. subset group containing more than 75% of animals) is recommended to achieve better accuracy of group movement characteristics and spatial occupancy for the use of correlating cattle locations with other environmental factors. PMID:25647571

Occupational and leisure-time energy expenditure and body mass index.

PubMed

Kaleta, Dorota; Makowiec-Dabrowska, Teresa; Jegier, Anna

2007-01-01

Almost all over the world, both high- and low-income countries have been experiencing the obesity epidemic. The aim of the study was to evaluate the association between occupational energy expenditure and body mass index (BMI). The study was performed in a randomly selected group of 508 full-time employees, including 272 men (mean age, 42.6 +/- 10.6 years) and 236 women (mean age, 41.5 +/- 9.9 years). Logistic regression was used to estimate odds ratios and 95% confidence intervals as well as to control the effects of occupational workload and BMI. Physical activity was determined by the Seven Day Physical Activity Recall (SDPAR). The multifactorial logistic regression analysis did not indicate that weekly energy expenditure on occupational physical activity (kcal/week) was linked with the risk for BMI over 25 (kg/m). But leisure-time physical activity (LTPA) was associated with BMI level in both men and women. In the group of men declaring no energy expenditure on physical activity, the risk for BMI > 25 (kg/m) was significantly higher than among men expending 1000 kcal/week or more on LTPA (adjusted OR = 1.05; 95%CI: 1.03-2.27). Also, among women not taking up any recreational physical activity, the risk of BMI > 25 (kg/m) was higher than in females, reaching a satisfactory level of recreational physical activity (adjusted OR = 2.39; 95%CI: 1.07-7.42). A higher educational attainment and a higher socioeconomic status were also associated with a lower risk of unhealthy body weight in the study participants. Prophylactic schedules associated with management of overweight and obesity should be addressed to all adults, above all to older age groups. Future programs aimed at decreasing the spread of overweight and obesity in adults should consider an improvement in health habits, including leisure-time physical activity and diet as well as socioeconomic factors. Targeted health education interventions should assist in reducing the obesity epidemic.

Fine particle number and mass concentration measurements in urban Indian households.

PubMed

Mönkkönen, P; Pai, P; Maynard, A; Lehtinen, K E J; Hämeri, K; Rechkemmer, P; Ramachandran, G; Prasad, B; Kulmala, M

2005-07-15

Fine particle number concentration (D(p)>10 nm, cm(-3)), mass concentrations (approximation of PM(2.5), microg m(-3)) and indoor/outdoor number concentration ratio (I/O) measurements have been conducted for the first time in 11 urban households in India, 2002. The results indicate remarkable high indoor number and mass concentrations and I/O number concentration ratios caused by cooking. Besides cooking stoves that used liquefied petroleum gas (LPG) or kerosene as the main fuel, high indoor concentrations can be explained by poor ventilation systems. Particle number concentrations of more than 300,000 cm(-3) and mass concentrations of more than 1000 microg m(-3) were detected in some cases. When the number and mass concentrations during cooking times were statistically compared, a correlation coefficient r>0.50 was observed in 63% of the households. Some households used other fuels like wood and dung cakes along with the main fuel, but also other living activities influenced the concentrations. In some areas, outdoor combustion processes had a negative impact on indoor air quality. The maximum concentrations observed in most cases were due to indoor combustion sources. Reduction of exposure risk and health effects caused by poor indoor air in urban Indian households is possible by improving indoor ventilation and reducing penetration of outdoor particles.

Cosmological constraint on the light gravitino mass from CMB lensing and cosmic shear

DOE Office of Scientific and Technical Information (OSTI.GOV)

Osato, Ken; Yoshida, Naoki; Sekiguchi, Toyokazu

2016-06-01

Light gravitinos of mass ∼< O (10) eV are of particular interest in cosmology, offering various baryogenesis scenarios without suffering from the cosmological gravitino problem. The gravitino may contribute considerably to the total matter content of the Universe and affect structure formation from early to present epochs. After the gravitinos decouple from other particles in the early Universe, they free-stream and consequently suppress density fluctuations of (sub-)galactic length scales. Observations of structure at the relevant length-scales can be used to infer or constrain the mass and the abundance of light gravitinos. We derive constraints on the light gravitino mass usingmore » the data of cosmic microwave background (CMB) lensing from Planck and of cosmic shear from the Canada France Hawaii Lensing Survey survey, combined with analyses of the primary CMB anisotropies and the signature of baryon acoustic oscillations in galaxy distributions. The obtained constraint on the gravitino mass is m {sub 3/2} < 4.7 eV (95 % C.L.), which is substantially tighter than the previous constraint from clustering analysis of Ly-α forests.« less

Crash pulse optimization for occupant protection at various impact velocities.

PubMed

Ito, Daisuke; Yokoi, Yusuke; Mizuno, Koji

2015-01-01

Vehicle deceleration has a large influence on occupant kinematic behavior and injury risks in crashes, and the optimization of the vehicle crash pulse that mitigates occupant loadings has been the subject of substantial research. These optimization research efforts focused on only high-velocity impact in regulatory or new car assessment programs though vehicle collisions occur over a wide range of velocities. In this study, the vehicle crash pulse was optimized for various velocities with a genetic algorithm. Vehicle deceleration was optimized in a full-frontal rigid barrier crash with a simple spring-mass model that represents the vehicle-occupant interaction and a Hybrid III 50th percentile male multibody model. To examine whether the vehicle crash pulse optimized at the high impact velocity is useful for reducing occupant loading at all impact velocities less than the optimized velocity, the occupant deceleration was calculated at various velocities for the optimized crash pulse determined at a high speed. The optimized vehicle deceleration-deformation characteristics that are effective for various velocities were investigated with 2 approaches. The optimized vehicle crash pulse at a single impact velocity consists of a high initial impulse followed by zero deceleration and then constant deceleration in the final stage. The vehicle deceleration optimized with the Hybrid III model was comparable to that determined from the spring-mass model. The optimized vehicle deceleration-deformation characteristics determined at a high speed did not necessarily lead to an occupant deceleration reduction at a lower velocity. The maximum occupant deceleration at each velocity was normalized by the maximum deceleration determined in the single impact velocity optimization. The resulting vehicle deceleration-deformation characteristic was a square crash pulse. The objective function was defined as the number of injuries, which was the product of the number of collisions at the

A Second Look at the Process of Occupational Feminization and Pay Reduction in Occupations.

PubMed

Mandel, Hadas

2018-04-01

Using the IPUMS-USA data for the years 1960-2015, this study examines trends in the effect of occupational feminization on occupational pay in the U.S. labor market and explores some of the mechanisms underlying these trends. The findings show that the (negative) association between occupational feminization and occupational pay level has declined, becoming insignificent in 2015. This trend, however, is reversed after education is controlled for at the individual as well as the occupational level. The two opposite trends are discussed in light of the twofold effect of education: (1) the entry of women into occupations requiring high education, and (2) the growing returns to education and to occupations with higher educational requirements. These two processes have concealed the deterioration in occupational pay following feminization. The findings underscore the significance of structural forms of gender inequality in general, and occupational devaluation in particular.

Detection of Enhanced Central Mass-to-light Ratios in Low-mass Early-type Galaxies: Evidence for Black Holes?

NASA Astrophysics Data System (ADS)

Pechetti, Renuka; Seth, Anil; Cappellari, Michele; McDermid, Richard; den Brok, Mark; Mieske, Steffen; Strader, Jay

2017-11-01

We present dynamical measurements of the central mass-to-light ratio (M/L) of a sample of 27 low-mass early-type {{ATLAS}}3{{D}} galaxies. We consider all {{ATLAS}}3{{D}} galaxies with 9.7 < log({M}\\star /{M}⊙ ) < 10.5 in our analysis, selecting out galaxies with available high-resolution Hubble Space Telescope (HST) data, and eliminating galaxies with significant central color gradients or obvious dust features. We use the HST images to derive mass models for these galaxies and combine these with the central velocity dispersion values from {{ATLAS}}3{{D}} data to obtain a central dynamical M/L estimate. These central dynamical {\\text{}}M/L{{s}} are higher than dynamical {\\text{}}M/L{{s}} derived at larger radii and stellar population estimates of the galaxy centers in ˜80% of galaxies, with a median enhancement of ˜14% and a statistical significance of 3.3σ. We show that the enhancement in the central M/L is best described either by the presence of black holes in these galaxies or by radial initial mass function variations. Assuming a black hole model, we derive black hole masses for the sample of galaxies. In two galaxies, NGC 4458 and NGC 4660, the data suggest significantly overmassive black holes, while in most others only upper limits are obtained. We also show that the level of M/L enhancements we see in these early-type galaxy nuclei are consistent with the larger enhancements seen in ultracompact dwarf galaxies (UCDs), supporting the scenario where massive UCDs are created by stripping galaxies of these masses.

Global Civil Aviation Black Carbon Particle Mass and Number Emissions

NASA Astrophysics Data System (ADS)

Stettler, M. E. J.

2015-12-01

Black carbon (BC) is a product of incomplete combustion emitted by aircraft engines. In the atmosphere, BC particles strongly absorb incoming solar radiation and influence cloud formation processes leading to highly uncertain, but likely net positive warming of the earth's atmosphere. At cruise altitude, BC particle number emissions can influence the concentration of ice nuclei that can lead to contrail formation, with significant and highly uncertainty climate impacts. BC particles emitted by aircraft engines also degrade air quality in the vicinity of airports and globally. A significant contribution to the uncertainty in environmental impacts of aviation BC emissions is the uncertainty in emissions inventories. Previous work has shown that global aviation BC mass emissions are likely to have been underestimated by a factor of three. In this study, we present an updated global BC particle number inventory and evaluate parameters that contribute to uncertainty using global sensitivity analysis techniques. The method of calculating particle number from mass utilises a description of the mobility of fractal aggregates and uses the geometric mean diameter, geometric standard deviation, mass-mobility exponent, primary particle diameter and material density to relate the particle number concentration to the total mass concentration. Model results show good agreement with existing measurements of aircraft BC emissions at ground level and at cruise altitude. It is hoped that the results of this study can be applied to estimate direct and indirect climate impacts of aviation BC emissions in future studies.

Source and Health Implication of Diurnal Atmospheric PM Mass and Number Concentrations

NASA Astrophysics Data System (ADS)

Li, W.; Olvera, H. A.; Garcia, J. H.; Pingitore, N. E.

2007-12-01

Exposure to atmospheric PM has been known to be associated with adverse health effects, decreased heart-rate variability, and respiratory and cardiopulmonary related morbidity and mortality. New evidence suggests that physical characteristics (mass, size, number, surface area, and morphology) of particles are strongly associated with mortality and morbidity through acute exposure. In particular, as reported in the literature, fine or ultrafine particles are more toxic than coarse particles on an equivalent mass basis while particles of less than 30 nm or greater than 2.5 um in diameter deposit more effectively (approximately 80 percent) in lung versus approximately 18 percent for particles in the range of 100 nm and 1 um. In addition, positive association has been observed between day to day variation in PM2.5 and hospital admissions, mortality and particle surface area, or particle number concentration and oxidative stress-induced DNA damage. This presentation shows the results of a study characterizing the physical properties of PM in El Paso, Texas. Diurnal PM mass concentration peaks previously observed at several other cities along the U.S.-Mexico border and elsewhere in the world were observed in El Paso. The hourly PM particle count varied from less than 10,000 particles/cm3 to greater than 80,000 particles/cm3 during the diurnal PM mass peaks. The total number of PM particles peaked in the morning and in the evening while the mode of the particle size changed from 20 nm to 50 nm, indicating different PM sources may be responsible for the mass and number concentrations and agglomeration of particles in the atmosphere during the day may possibly plays a role. A multivariate regression analysis was performed to correlate the PM mass and number concentrations to environmental variables. Real- time wind statistics were used in conjunction with traffic data at a nearby highway for identifying sources of the PM mass and number concentration peaks. Evaluation of

The trend of occupational injuries in Korea from 2001 to 2010.

PubMed

Rhee, Kyung Yong; Choe, Seong Weon; Kim, Young Sun; Koo, Kwon Ho

2013-03-01

This study is planned to assess the trend of occupational injuries in Korea from 2001 to 2010. Ten years of occupational injuries, from 2001 to 2010, were analyzed in order to investigate the changing profiles according to the various characteristics of injuries; economic sectors, age of the injured, and type of injuries. The changing profile of occupational injuries was investigated by comparison with an index-created relative value based on the number of cases of reference category. The fatalities of construction, forest, agriculture, and service show the increasing trend. The nonfatal occupational injuries of the manufacturing sector were higher than those of other sectors in every year but the fatal occupational injuries of construction workers were higher than those of the manufacturing sector. Occupational injuries occurring due to amputation and those of slip and trip increased. The number of occupational injuries for the worker groups of 24 years old and below decreased and 45 years old and above increased. In comparison to the figure of fall from height, the figures of slip and trip or caught in equipment are higher in every calendar year. This study find out construction, forest, agriculture, and service sectors, aged worker with 45 years old and over can be target population for the strategies of occupational safety.

The Story of UGC 11919: An Unusual Spiral Galaxy Possibly Having a Warp and Peculiarly Low Mass-to-Light Ratio

NASA Astrophysics Data System (ADS)

Saburova, A. S.; Józsa, G. I. G.; Zasov, A. V.; Bizyaev, D. V.; Uklein, R. I.

2014-05-01

We present the results of a multi-wavelength study of the spiral galaxy UGC 11919 to verify that the galaxy has a peculiarly low dynamical mass-to-light ratio (M/LB) and to study its kinematical structure in general. We obtained an H I data cube of UGC 11919 with the Westerbork Synthesis Radio Telescope parallel with photometric observations with the Apache Point 0.5-m telescope. Two complementary models of the H I data cube provide a reasonable fit to the data: a model representing a symmetric S-shaped warp and a flat disc model with the deviations from axial symmetry caused by noncircular or bar streaming motions. In both cases UGC 11919 appears to have a disk of unusually low dynamical mass-to-light ratio in spite of its red color and a dark halo of moderate mass. A bottom-light stellar initial mass function could explain the results. Stellar kinematic profiles derived from long-slit observations, with the 6-m telescope of the Special Astrophysical Observatory of the Russian Academy of Sciences, show a signature of kinematically decoupled nuclear disk in the galaxy.

Occupational exposure to asbestos in the drywall taping process.

PubMed

Verma, D K; Middleton, C G

1980-04-01

Studies of airborne asbestos fiber concentrations associated with various operations of the drywall taping process have been undertaken in the province of Alberta, Canada. The results show that mixing, sanding and sweeping created high levels of airborne asbestos dust. The measured concentrations were frequently in excess of occupational health standards. Sanding in particular was assessed the most hazardous operation. The results are discussed in light of present and proposed Occupational Health Standards, and in terms of its implications for other workers, household contacts, and consumer's risk. Measures to reduce and control the health hazards associated with the process are described.

Light stop mass limits from Higgs rate measurements in the MSSM: Is MSSM electroweak baryogenesis still alive after all?

DOE PAGES

Liebler, Stefan; Profumo, Stefano; Stefaniak, Tim

2016-04-22

We investigate the implications of the Higgs rate measurements from Run 1 of the LHC for the mass of the light scalar top partner (stop) in the Minimal Supersymmetric Standard Model (MSSM). We focus on light stop masses, and we decouple the second, heavy stop and the gluino to the multi-TeV range in order to obtain a Higgs mass of ~125 GeV. We derive lower mass limits for the light stop within various scenarios, taking into account the effects of a possibly light scalar tau partner (stau) or chargino on the Higgs rates, of additional Higgs decays to undetectable “newmore » physics”, as well as of non-decoupling of the heavy Higgs sector. Under conservative assumptions, the stop can be as light as 123 GeV. Relaxing certain theoretical and experimental constraints, such as vacuum stability and model-dependent bounds on sparticle masses from LEP, we find that the light stop mass can be as light as 116 GeV. Lastly, our indirect limits are complementary to direct limits on the light stop mass from collider searches and have important implications for electroweak baryogenesis in the MSSM as a possible explanation for the observed matter-antimatter asymmetry of the Universe.« less

Search for light curve modulations among Kepler candidates. Three very low-mass transiting companions

NASA Astrophysics Data System (ADS)

Lillo-Box, J.; Ribas, A.; Barrado, D.; Merín, B.; Bouy, H.

2016-07-01

Context. Light curve modulations in the sample of Kepler planet candidates allows the disentangling of the nature of the transiting object by photometrically measuring its mass. This is possible by detecting the effects of the gravitational pull of the companion (ellipsoidal modulations) and in some cases, the photometric imprints of the Doppler effect when observing in a broad band (Doppler beaming). Aims: We aim to photometrically unveil the nature of some transiting objects showing clear light curve modulations in the phase-folded Kepler light curve. Methods: We selected a subsample among the large crop of Kepler objects of interest (KOIs) based on their chances to show detectable light curve modulations, I.e., close (a< 12 R⋆) and large (in terms of radius, according to their transit signal) candidates. We modeled their phase-folded light curves with consistent equations for the three effects, namely, reflection, ellipsoidal and beaming (known as REB modulations). Results: We provide detailed general equations for the fit of the REB modulations for the case of eccentric orbits. These equations are accurate to the photometric precisions achievable by current and forthcoming instruments and space missions. By using this mathematical apparatus, we find three close-in very low-mass companions (two of them in the brown dwarf mass domain) orbiting main-sequence stars (KOI-554, KOI-1074, and KOI-3728), and reject the planetary nature of the transiting objects (thus classifying them as false positives). In contrast, the detection of the REB modulations and transit/eclipse signal allows the measurement of their mass and radius that can provide important constraints for modeling their interiors since just a few cases of low-mass eclipsing binaries are known. Additionally, these new systems can help to constrain the similarities in the formation process of the more massive and close-in planets (hot Jupiters), brown dwarfs, and very low-mass companions.

Quantifying Particle Numbers and Mass Flux in Drifting Snow

NASA Astrophysics Data System (ADS)

Crivelli, Philip; Paterna, Enrico; Horender, Stefan; Lehning, Michael

2016-12-01

We compare two of the most common methods of quantifying mass flux, particle numbers and particle-size distribution for drifting snow events, the snow-particle counter (SPC), a laser-diode-based particle detector, and particle tracking velocimetry based on digital shadowgraphic imaging. The two methods were correlated for mass flux and particle number flux. For the SPC measurements, the device was calibrated by the manufacturer beforehand. The shadowgrapic imaging method measures particle size and velocity directly from consecutive images, and before each new test the image pixel length is newly calibrated. A calibration study with artificially scattered sand particles and glass beads provides suitable settings for the shadowgraphical imaging as well as obtaining a first correlation of the two methods in a controlled environment. In addition, using snow collected in trays during snowfall, several experiments were performed to observe drifting snow events in a cold wind tunnel. The results demonstrate a high correlation between the mass flux obtained for the calibration studies (r ≥slant 0.93) and good correlation for the drifting snow experiments (r ≥slant 0.81). The impact of measurement settings is discussed in order to reliably quantify particle numbers and mass flux in drifting snow. The study was designed and performed to optimize the settings of the digital shadowgraphic imaging system for both the acquisition and the processing of particles in a drifting snow event. Our results suggest that these optimal settings can be transferred to different imaging set-ups to investigate sediment transport processes.

The Halo Occupation Distribution of Active Galactic Nuclei

NASA Astrophysics Data System (ADS)

Chatterjee, Suchetana; Nagai, D.; Richardson, J.; Zheng, Z.; Degraf, C.; DiMatteo, T.

2011-05-01

We investigate the halo occupation distribution of active galactic nuclei (AGN) using a state-of-the-art cosmological hydrodynamic simulation that self-consistently incorporates the growth and feedback of supermassive black holes and the physics of galaxy formation (DiMatteo et al. 2008). We show that the mean occupation function can be modeled as a softened step function for central AGN and a power law for the satellite population. The satellite occupation is consistent with weak redshift evolution and a power law index of unity. The number of satellite black holes at a given halo mass follows a Poisson distribution. We show that at low redshifts (z=1.0) feedback from AGN is responsible for higher suppression of black hole growth in higher mass halos. This effect introduces a bias in the correlation between instantaneous AGN luminosity and the host halo mass, making AGN clustering depend weakly on luminosity at low redshifts. We show that the radial distribution of AGN follows a power law which is fundamentally different from those of galaxies and dark matter. The best-fit power law index is -2.26 ± 0.23. The power law exponent do not show any evolution with redshift, host halo mass and AGN luminosity within statistical limits. Incorporating the environmental dependence of supermassive black hole accretion and feedback, our formalism provides the most complete theoretical tool for interpreting current and future measurements of AGN clustering.

The influence of occupant anthropometry and seat position on ejection risk in a rollover.

PubMed

Atkinson, Theresa; Fras, Andrew; Telehowski, Paul

2010-08-01

During rollover crashes, ejection increases an occupant's risk of severe to fatal injury as compared to risks for those retained in the vehicle. The current study examined whether occupant anthropometry might influence ejection risk. Factors such as restraint use/disuse, seating position, vehicle type, and roll direction were also considered in the analysis. The current study examined occupant ejections in 10 years of National Automotive Sampling System (NASS) single-event rollovers of passenger vehicles and light trucks. Statistical analysis of unweighted and weighted ejection data was carried out. No statistically significant differences in ejection rates were found based on occupant height, age, or body mass index. Drivers were ejected significantly more frequently than other occupants: 62 percent of unrestrained drivers were ejected vs. 51 percent unrestrained right front occupants. Second row unrestrained occupants were ejected at rates similar to right front-seated occupants. There were no significant differences in ejection rates for near- vs. far-side occupants. These data suggest that assessment of ejection prevention systems using either a 50th or 5th percentile adult anthropomorphic test dummy (ATD) might provide a reasonable measure of system function for a broad range of occupants. They also support the development of ejection mitigation technologies that extend beyond the first row to protect occupants in rear seat positions. Future studies should consider potential interaction effects (i.e., occupant size and vehicle dimensions) and the influence of occupant size on ejection risk in non-single-event rollovers.

A Method for Modeling Household Occupant Behavior to Simulate Residential Energy Consumption

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Brandon J; Starke, Michael R; Abdelaziz, Omar

2014-01-01

This paper presents a statistical method for modeling the behavior of household occupants to estimate residential energy consumption. Using data gathered by the U.S. Census Bureau in the American Time Use Survey (ATUS), actions carried out by survey respondents are categorized into ten distinct activities. These activities are defined to correspond to the major energy consuming loads commonly found within the residential sector. Next, time varying minute resolution Markov chain based statistical models of different occupant types are developed. Using these behavioral models, individual occupants are simulated to show how an occupant interacts with the major residential energy consuming loadsmore » throughout the day. From these simulations, the minimum number of occupants, and consequently the minimum number of multiple occupant households, needing to be simulated to produce a statistically accurate representation of aggregate residential behavior can be determined. Finally, future work will involve the use of these occupant models along side residential load models to produce a high-resolution energy consumption profile and estimate the potential for demand response from residential loads.« less

Exposure to occupational therapy as a factor influencing recruitment to the profession.

PubMed

Byrne, Nicole

2015-08-01

This article provides insight into the impact that exposure to an occupational therapist, in personal capacity or via a professional interaction, has on the decision to enter an occupational therapy undergraduate programme. A quantitative survey was completed by 139 occupational therapy students. The survey tool focussed on the students' exposure to a range of allied health professions (e.g. occupational therapy, physiotherapy, psychology) and investigated how exposure to occupational therapy had influenced their decision to enter the programme. The results indicated that over 70% of respondents had personal professional exposure to occupational therapy prior to making a career decision. Exposure most frequently involved occupational therapy intervention of a friend or family member. The majority of students who had professional exposure to occupational therapy (e.g. family, self, friend received occupational therapy) identified that it was the most influential factor in their career choice. Forty per cent of the occupational therapy students did not enter the programme straight from school and the influence of 'working with an occupational therapist' was noteworthy for mature aged students. Occupational therapists need to consider that every interaction they have with the community provides valuable information regarding the profession and gives insight into occupational therapy as a potential career path for other people. Additionally, the current research identifies there were differences in the impact, type and number of exposures for different student groups, and this potentially offers some insight into ways in which occupational therapy could target specific groups within the community to increase future diversity in the profession. © 2015 Occupational Therapy Australia.

The Trend of Occupational Injuries in Korea from 2001 to 2010

PubMed Central

Rhee, Kyung Yong; Choe, Seong Weon; Koo, Kwon Ho

2013-01-01

Objectives This study is planned to assess the trend of occupational injuries in Korea from 2001 to 2010. Methods Ten years of occupational injuries, from 2001 to 2010, were analyzed in order to investigate the changing profiles according to the various characteristics of injuries; economic sectors, age of the injured, and type of injuries. The changing profile of occupational injuries was investigated by comparison with an index-created relative value based on the number of cases of reference category. Results The fatalities of construction, forest, agriculture, and service show the increasing trend. The nonfatal occupational injuries of the manufacturing sector were higher than those of other sectors in every year but the fatal occupational injuries of construction workers were higher than those of the manufacturing sector. Occupational injuries occurring due to amputation and those of slip and trip increased. The number of occupational injuries for the worker groups of 24 years old and below decreased and 45 years old and above increased. In comparison to the figure of fall from height, the figures of slip and trip or caught in equipment are higher in every calendar year. Conclusion This study find out construction, forest, agriculture, and service sectors, aged worker with 45 years old and over can be target population for the strategies of occupational safety. PMID:23515324

The community-level effect of light on germination timing in relation to seed mass: a source of regeneration niche differentiation.

PubMed

Zhang, Chunhui; Willis, Charles G; Burghardt, Liana T; Qi, Wei; Liu, Kun; Souza-Filho, Paulo Roberto de Moura; Ma, Zhen; Du, Guozhen

2014-11-01

Within a community, species may germinate at different times so as to mitigate competition and to take advantage of different aspects of the seasonal environment (temporal niche differentiation). We illustrated a hypothesis of the combined effects of abiotic and biotic competitive factors on germination timing and the subsequent upscale effects on community assembly. We estimated the germination timing (GT) for 476 angiosperm species of the eastern Tibetan Plateau grasslands under two light treatments in the field: high (i.e. natural) light and low light. We also measured the shift in germination timing (SGT) across treatments for all species. Furthermore, we used phylogenetic comparative methods to test if GT and SGT were associated with seed mass, an important factor in competitive interactions. We found a significant positive correlation between GT and seed mass in both light treatments. Additionally, small seeds (early germinating seeds) tended to germinate later and large seeds (late germinating seeds) tended to germinate earlier under low light vs high light conditions. Low light availability can reduce temporal niche differentiation by increasing the overlap in germination time between small and large seeds. In turn, reduced temporal niche differentiation may increase competition in the process of community assembly. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.

Extended Glauber Model of Antiproton-Nucleus Annihilation for All Energies and Mass Numbers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Teck-Ghee; Wong, Cheuk-Yin

2014-01-01

Previous analytical formulas in the Glauber model for high-energy nucleus-nucleus collisions developed by Wong are utilized and extended to study Antiproton-nucleus annihilations for both high and low energies, after taking into account the effects of Coulomb and nuclear interactions, and the change of the antiproton momentum inside a nucleus. The extended analytical formulas capture the main features of the experimental antiproton-nucleus annihilation cross sections for all energies and mass numbers. At high antiproton energies, they exhibit the granular property for the lightest nuclei and the black-disk limit for the heavy nuclei. At low antiproton energies, they display the effect ofmore » the antiproton momentum increase due to the nuclear interaction for the light nuclei, and the effect of the magnification due to the attractive Coulomb interaction for the heavy nuclei.« less

Health and occupational correlates of perceived occupational stress in symphony orchestra musicians.

PubMed

Middlestadt, S E; Fishbein, M

1988-09-01

The authors examined the relationship between perceived occupational stress and the prevalence of a number of psychologic and physical ailments in a sample of professional symphony orchestra musicians and related musicians' self-reports of stress to demographic and occupational characteristics. Results of a survey of 2,212 musicians from 47 symphony orchestras revealed a significant relationship between perceived occupational stress and prevalence of a number of psychologic as well as physical medical problems. Age and occupational factors, such as the orchestra in which the musician plays, the instrument played, and status as a soloist, were also found to be significant correlates of perceived stress.

Subset of Kappa and Lambda Germline Sequences Result in Light Chains with a Higher Molecular Mass Phenotype.

PubMed

Barnidge, David R; Lundström, Susanna L; Zhang, Bo; Dasari, Surendra; Murray, David L; Zubarev, Roman A

2015-12-04

In our previous work, we showed that electrospray ionization of intact polyclonal kappa and lambda light chains isolated from normal serum generates two distinct, Gaussian-shaped, molecular mass distributions representing the light-chain repertoire. During the analysis of a large (>100) patient sample set, we noticed a low-intensity molecular mass distribution with a mean of approximately 24 250 Da, roughly 800 Da higher than the mean of the typical kappa molecular-mass distribution mean of 23 450 Da. We also observed distinct clones in this region that did not appear to contain any typical post-translational modifications that would account for such a large mass shift. To determine the origin of the high molecular mass clones, we performed de novo bottom-up mass spectrometry on a purified IgM monoclonal light chain that had a calculated molecular mass of 24 275.03 Da. The entire sequence of the monoclonal light chain was determined using multienzyme digestion and de novo sequence-alignment software and was found to belong to the germline allele IGKV2-30. The alignment of kappa germline sequences revealed ten IGKV2 and one IGKV4 sequences that contained additional amino acids in their CDR1 region, creating the high-molecular-mass phenotype. We also performed an alignment of lambda germline sequences, which showed additional amino acids in the CDR2 region, and the FR3 region of functional germline sequences that result in a high-molecular-mass phenotype. The work presented here illustrates the ability of mass spectrometry to provide information on the diversity of light-chain molecular mass phenotypes in circulation, which reflects the germline sequences selected by the immunoglobulin-secreting B-cell population.

[Epidemiology of occupational skin cancer due to UV-irradiation].

PubMed

Diepgen, T L; Drexler, H; Schmitt, J

2012-10-01

Skin cancer induced by occupational UV-irradiation is not an official occupational disease number in the appendix of the German ordinance on occupational diseases (Berufskrankheitenverordnung (BKV) but can be recognized as a "virtually" occupational disease according to § 9 (2) of the 7th book of the German Social Code (SGB VII). Epidemiological studies have demonstrated a positive, statistically significant and relevant association between occupational UV-irradiation and the risk of squamous cell carcinoma (SCC) and actinic keratoses (AK). Outdoor workers have on average a 100% higher risk to develop SCC compared to the general population. Therefore, the prerequisites for a new occupational disease are fulfilled and SCC and AK should be reported as an occupational disease if an additional 40% occupationally-related UV-irradiation is documented and the clinical criteria are typical for work- related skin cancer. Epidemiologic evidence also indicates a significant association between work-related UV-irradiation and basal cell carcinoma (BCC) risk: however the results are less consistent and the association is weaker than with SCC. There is an urgent need for further studies in outdoor workers on BCC and lentigo maligna melanoma.

Occupational skin diseases in Korea.

PubMed

Ahn, Yeon-Soon; Kim, Min-Gi

2010-12-01

Skin disease is the most common occupational disease, but the reported number is small in Korea due to a difficulty of detection and diagnosis in time. We described various official statistics and data from occupational skin disease surveillance system, epidemiological surveys and cases published in scientific journals. Until 1981, 2,222 cases of occupational skin disease were reported by Korean employee's regular medical check-up, accounting for 4.9% of the total occupational diseases. There was no subsequent official statistics to figure out occupational skin diseases till 1998. From 1999, the Korea Occupational Safety and Health Agency (KOSHA) published the number of occupational skin diseases through the statistics of Cause Investigation for Industrial Accidents. A total of 301 cases were reported from 1999 to 2007. Recent one study showed the figures of compensated occupational skin diseases. Many of them belonged to daily-paid workers in the public service, especially forestry workers. Also, it described the interesting cases such as vitiligo and trichloroethylene-induced Stevens-Johnson Syndrome. Skin diseases are still important though the number of cases has decreased, and therefore it is recommended to grasp the status of occupational skin diseases through continuous surveillance system and to make policy protecting high-risk group.

Occupational injuries due to violence.

PubMed

Hales, T; Seligman, P J; Newman, S C; Timbrook, C L

1988-06-01

Each year in the United States, an estimated 800 to 1,400 people are murdered at work, and an unknown number of nonfatal injuries due to workplace violence occur. Based on Ohio's workers' compensation claims from 1983 through 1985, police officers, gasoline service station employees, employees of the real estate industry, and hotel/motel employees were found to be at the highest risk for occupational violent crime (OVC) injury and death. Grocery store employees, specifically those working in convenience food stores, and employees of the real estate industry had the most reported rapes. Four previously unidentified industries at increased risk of employee victimization were described. Identification of industries and occupations at high risk for crime victimization provides the opportunity to focus preventive strategies to promote employee safety and security in the workplace.

29 CFR 1915.82 - Lighting.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Lighting. 1915.82 Section 1915.82 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT General Working Conditions § 1915.82 Lighting...

The relation between the mass-to-light ratio and the relaxation state of globular clusters

NASA Astrophysics Data System (ADS)

Bianchini, P.; Sills, A.; van de Ven, G.; Sippel, A. C.

2017-08-01

The internal dynamics of globular clusters (GCs) is strongly affected by two-body interactions that bring the systems to a state of partial energy equipartition. Using a set of Monte Carlo clusters simulations, we investigate the role of the onset of energy equipartition in shaping the mass-to-light ratio (M/L) in GCs. Our simulations show that the M/L profiles cannot be considered constant and their specific shape strongly depends on the dynamical age of the clusters. Dynamically younger clusters display a central peak up to M/L ≃ 25 M⊙/L⊙ caused by the retention of dark remnants; this peak flattens out for dynamically older clusters. Moreover, we find that also the global values of M/L correlate with the dynamical state of a cluster quantified as either the number of relaxation times a system has experienced nrel or the equipartition parameter meq: clusters closer to full equipartition (higher nrel or lower meq) display a lower M/L. We show that the decrease of M/L is primarily driven by the dynamical ejection of dark remnants, rather than by the escape of low-mass stars. The predictions of our models are in good agreement with observations of GCs in the Milky Way and M31, indicating that differences in relaxation state alone can explain variations of M/L up to a factor of ≃3. Our characterization of the M/L as a function of relaxation state is of primary relevance for the application and interpretation of dynamical models.

Series cell light extinction monitor

DOEpatents

Novick, Vincent J.

1990-01-01

A method and apparatus for using the light extinction measurements from two or more light cells positioned along a gasflow chamber in which the gas volumetric rate is known to determine particle number concentration and mass concentration of an aerosol independent of extinction coefficient and to determine estimates for particle size and mass concentrations. The invention is independent of particle size. This invention has application to measurements made during a severe nuclear reactor fuel damage test.

On the number of light rings in curved spacetimes of ultra-compact objects

NASA Astrophysics Data System (ADS)

Hod, Shahar

2018-01-01

In a very interesting paper, Cunha, Berti, and Herdeiro have recently claimed that ultra-compact objects, self-gravitating horizonless solutions of the Einstein field equations which have a light ring, must possess at least two (and, in general, an even number of) light rings, of which the inner one is stable. In the present compact paper we explicitly prove that, while this intriguing theorem is generally true, there is an important exception in the presence of degenerate light rings which, in the spherically symmetric static case, are characterized by the simple dimensionless relation 8 πrγ2 (ρ +pT) = 1 [here rγ is the radius of the light ring and { ρ ,pT } are respectively the energy density and tangential pressure of the matter fields]. Ultra-compact objects which belong to this unique family can have an odd number of light rings. As a concrete example, we show that spherically symmetric constant density stars with dimensionless compactness M / R = 1 / 3 possess only one light ring which, interestingly, is shown to be unstable.

Assessment of airborne bacteria in selected occupational environments in Quezon City, Philippines.

PubMed

Rendon, Rhoshela Vi C; Garcia, Bea Clarise B; Vital, Pierangeli G

2017-05-04

Exposure to bioaerosols has been associated with health deterioration among workers in several occupational environments. This highlights the need to study the microbiological quality of air of workplaces as no such study has been conducted yet in the Philippines. To detect and characterize the culturable mesophilic airborne bacteria in selected occupational environments we used passive sedimentation technique. It was observed that the number of colony-forming units was highest in junk shop, followed by the light railway transit station and last the office. By contrast, the bacterial composition was similar in all sites: Gram-positive cocci > Gram-positive bacilli > Gram-negative bacteria. Staphylococcus aureus and Bacillus spp. were also detected in all sites. These findings suggest that the presence of airborne bacteria may be a potential health hazard in urban occupational environments in the Philippines.

Low mass SN Ia and the late light curve

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colgate, S.A.; Fryer, C.L.; Hand, K.P.

1995-12-31

The late bolometric light curves of type Ia supernovae, when measured accurately over several years, show an exponential decay with a 56d half-life over a drop in luminosity of 8 magnitudes (10 half-lives). The late-time light curve is thought to be governed by the decay of Co{sup 56}, whose 77d half-life must then be modified to account for the observed decay time. Two mechanisms, both relying upon the positron fraction of the Co{sup 56} decay, have been proposed to explain this modification. One explanation requires a large amount of emission at infra-red wavelengths where it would not be detected. Themore » other explanation has proposed a progressive transparency or leakage of the high energy positrons (Colgate, Petschek and Kriese, 1980). For the positrons to leak out of the expanding nebula at the required rate necessary to produce the modified 56d exponential, the mass of the ejecta from a one foe (10{sup 51} erg in kinetic energy) explosion must be small, M{sub ejec} = 0.4M{sub {circle_dot}} with M{sub ejec} {proportional_to} KE{sup 0.5}. Thus, in this leakage explanation, any reasonable estimate of the total energy of the explosion requires that the ejected mass be very much less than the Chandrasekhar mass of 1.4M{sub {circle_dot}}. This is very difficult to explain with the ``canonical`` Chandrasekhar-mass thermonuclear explosion that disintegrates the original white dwarf star. This result leads us to pursue alternate mechanisms of type Ia supernovae. These mechanisms include sub-Chandrasekhar thermonuclear explosions and the accretion induced collapse of Chandrasekhar mass white dwarfs. We will summarize the advantages and disadvantages of both mechanisms with considerable detail spent on our new accretion induced collapse simulations. These mechanisms lead to lower Ni{sup 56} production and hence result in type Ia supernovae with luminosities decreased down to {approximately} 50% that predicted by the ``standard`` model.« less

Plasmon mass scale in two-dimensional classical nonequilibrium gauge theory

NASA Astrophysics Data System (ADS)

Lappi, T.; Peuron, J.

2018-02-01

We study the plasmon mass scale in classical gluodynamics in a two-dimensional configuration that mimics the boost-invariant initial color fields in a heavy-ion collision. We numerically measure the plasmon mass scale using three different methods: a hard thermal loop (HTL) expression involving the quasiparticle spectrum constructed from Coulomb gauge field correlators, an effective dispersion relation, and the measurement of oscillations between electric and magnetic energies after introducing a spatially uniform perturbation to the electric field. We find that the HTL expression and the uniform electric field measurement are in rough agreement. The effective dispersion relation agrees with other methods within a factor of 2. We also study the dependence on time and occupation number, observing similar trends as in three spatial dimensions, where a power-law dependence sets in after an occupation-number-dependent transient time. We observe a decrease of the plasmon mass squared as t-1 / 3 at late times.

Occupational cancer in Britain

PubMed Central

Chen, Yiqun; Osman, John

2012-01-01

Although only a relatively small proportion of cancer is attributable to occupational exposure to carcinogenic agents, the estimated number of deaths due to occupational cancer is high when compared to other deaths due to work-related ill health and injury. However, risk from occupational exposure to carcinogens can be minimised through proportionate but effective risk management. The Health and Safety Executive (HSE) is the regulator of workplace health and safety in Great Britain. As part of its aim to reduce ill health arising from failures to control properly exposure to hazards at work, HSE commissioned the research presented elsewhere in this supplement to enable it to identify priorities for preventing occupational cancer. The research has shown that occupational cancer remains a key health issue and that low-level exposure of a large number of workers to carcinogens is important. The finding that a small number of carcinogens have been responsible for the majority of the burden of occupational cancer provides key evidence in the development of priorities for significant reduction of occupational cancer. Although the research presented in this supplement reflects the consequences of past exposures to carcinogens, occupational cancer remains a problem. The potential for exposure to the agents considered in this research is still present in the workplace and the findings are relevant to prevention of future disease. In this article, the principle approaches for risk reduction are described. It provides supporting information on some of the initiatives already being undertaken, or those being put in place, to reduce occupational cancer in Great Britain. The need also for systematic collection of exposure information and the importance of raising awareness and changing behaviours are discussed. PMID:22710673

Contribution from indoor sources to particle number and mass concentrations in residential houses

NASA Astrophysics Data System (ADS)

He, Congrong; Morawska, Lidia; Hitchins, Jane; Gilbert, Dale

As part of a large study investigating indoor air in residential houses in Brisbane, Australia, the purpose of this work was to quantify emission characteristics of indoor particle sources in 15 houses. Submicrometer particle number and approximation of PM 2.5 concentrations were measured simultaneously for more than 48 h in the kitchen of all the houses by using a condensation particle counter (CPC) and a photometer (DustTrak), respectively. In addition, characterizations of particles resulting from cooking conducted in an identical way in all the houses were measured by using a scanning mobility particle sizer (SMPS), an aerodynamic particle sizer (APS) and a DustTrak. All the events of elevated particle concentrations were linked to indoor activities using house occupants diary entries, and catalogued into 21 different types of indoor activities. This enabled quantification of the effect of indoor sources on indoor particle concentrations as well as quantification of emission rates from the sources. For example, the study found that frying, grilling, stove use, toasting, cooking pizza, cooking, candle vaporizing eucalyptus oil and fan heater use, could elevate the indoor submicrometer particle number concentration levels by more than five times, while PM 2.5 concentrations could be up to 3, 30 and 90 times higher than the background levels during smoking, frying and grilling, respectively.

Occupational dream, relation to parents and depression in the early adult transition.

PubMed

Gooden, W; Toye, R

1984-07-01

Assessed the impact of difficulty forming an occupational dream and relating to parents on depression among college students in their late teens and early twenties. Becoming independent of parents and forming an occupational dream are seen as two central issues during this period of life. Results from 64 students suggest that having to give up a valued dream, viewing one's relation to mother as authority-obeyer, and doing little exploring of occupational choices are related significantly to depression (p less than .0004). The significance of these results is discussed in light of theories of depression and the possible importance of different parenting styles for young adults who are facing the early adult transition.

Estimation of Population Number via Light Activities on Night-Time Satellite Images

NASA Astrophysics Data System (ADS)

Turan, M. K.; Yücer, E.; Sehirli, E.; Karaş, İ. R.

2017-11-01

Estimation and accurate assessment regarding population gets harder and harder day by day due to growth of world population in a fast manner. Estimating tendencies to settlements in cities and countries, socio-cultural development and population numbers is quite difficult. In addition to them, selection and analysis of parameters such as time, work-force and cost seems like another difficult issue. In this study, population number is guessed by evaluating light activities in İstanbul via night-time images of Turkey. By evaluating light activities between 2000 and 2010, average population per pixel is obtained. Hence, it is used to estimate population numbers in 2011, 2012 and 2013. Mean errors are concluded as 4.14 % for 2011, 3.74 % for 2012 and 3.04 % for 2013 separately. As a result of developed thresholding method, mean error is concluded as 3.64 % to estimate population number in İstanbul for next three years.

Traffic safety facts 1996 : occupant protection

DOT National Transportation Integrated Search

1997-01-01

In 1996, 32,317 occupants of passenger vehicles (cars, light trucks, vans, and utility vehicles) were killed in motor vehicle traffic crashes, 77 percent of the 41,907 traffic fatalities reported for the year. Among passenger vehicle occupants over 4...

Traffic safety facts 1994 : occupant protection

DOT National Transportation Integrated Search

1995-01-01

In 1994, 30,780 occupants of passenger vehicles (cars, light trucks, vans, and utility vehicles) were killed in motor vehicle traffic crashes, 76 percent of the 40,676 traffic fatalities reported for the year. Among passenger vehicle occupants over 4...

Traffic safety facts 1995 : occupant protection

DOT National Transportation Integrated Search

1996-01-01

In 1995, 31,897 occupants of passenger vehicles (cars, light trucks, vans, and utility vehicles) were killed in motor vehicle traffic crashes, 76 percent of the 41,798 traffic fatalities reported for the year. Among passenger vehicle occupants over 4...

Observations of seating position of front seat occupants relative to the side of the vehicle.

PubMed

Dinas, Arthur; Fildes, Brian N

2002-01-01

This study was an on-road observational study of the seating position and limb position of front seat occupants relevant to the side of the car for a representative sample of occupants during straight road driving and turning manoeuvres. A video camera captured over 650 front-on images of passenger car occupants in Metropolitan Melbourne. Results showed a significant numbers of occupants were seated out-of-position while travelling on the road and that a number of these were seated in a manner that may possibly result in injury from the deployment of a side airbag. This was particularly so while turning, a situation common in many side impacts. A substantial number of front seat occupants' arms were exposed to severe injury in the event of a side impact crash. These findings highlight a number of aspects of seating behaviour of driver and front passengers that need to be taken into account when designing side impact airbags.

A novel inversion method to calculate the mass fraction of coated refractory black carbon using a centrifugal particle mass analyzer and single particle soot photometer

NASA Astrophysics Data System (ADS)

Irwin, M.; Broda, K.; Olfert, J. S.; Schill, G. P.; McMeeking, G. R.; Schnitzler, E.; Jäger, W.

2016-12-01

Refractory black carbon (rBC) has important atmospheric impacts due to its ability to absorb light, and its interactions with light are partly governed by the acquisition of coatings or other mixing processes. Here, a novel inversion method is presented which derives the mass fraction of coated rBC using a coupled centrifugal particle mass analyzer (CPMA) and single particle soot photometer (SP2). The CPMA selects particles of a known mass-­to-­charge ratio, and the SP2 detects the mass of rBC in each individual particle. The results of the inversion are the simultaneous number distributions of both rBC mass and total particle mass. Practically, the distribution can be integrated to find properties of the total aerosol population, for example, i) mass fraction of coating and ii) mass of coating on a particle of known total mass. This was demonstrated via smog chamber experiments. Initially, particles in the chamber were pure rBC, produced from a methane burner and passed through a diffusion dryer and thermal denuder. An organic (non-rBC) coating was then grown onto the aerosol over several hours via photooxidation with p-xylene. The CPMA-SP2 coupled system sampled the aerosol over the reaction period as the coating grew. The CPMA was sequentially stepped over a mass range from 0.3 to 28 fg and the SP2 measured the mass of rBC in each individual CPMA-classified particle. The number and mass distributions were constructed using the inversion. As expected, the mass and number distributions of rBC and total mass were equivalent for uncoated particles. As the non-rBC coating thickness increased over time, a shift in the number distribution towards higher total mass was observed. At the end of the experiment, fresh rBC (i.e. uncoated, bare particles) was injected into the chamber, creating an external mixture of coated and uncoated particles. This external mixture was clearly resolved in the number distribution of rBC and total particle mass. It is expected that the

Seasonal variations of number size distributions and mass concentrations of atmospheric particles in Beijing

NASA Astrophysics Data System (ADS)

Yu, Jianhua; Guinot, Benjamin; Yu, Tong; Wang, Xin; Liu, Wenqing

2005-06-01

Particle number and mass concentrations were measured in Beijing during the winter and summer periods in 2003, together with some other parameters including black carbon (BC) and meteorological conditions. Particle mass concentrations exhibited low seasonality, and the ratio of PM2.5/PM10 in winter was higher than that in summer. Particle number size distribution (PSD) was characterized by four modes and exhibited low seasonality. BC was well correlated with the number and mass concentrations of accumulation and coarse particles, indicating these size particles are related to anthropogenic activities. Particle mass and number concentrations (except ultra-fine and nucleation particles) followed well the trends of BC concentration for the majority of the day, indicating that most particles were associated with primary emissions. The diurnal number distributions of accumulation and coarse mode particles were characterized by two peaks.

Occupational exposure to dioxins by thermal oxygen cutting, welding, and soldering of metals.

PubMed

Menzel, H M; Bolm-Audorff, U; Turcer, E; Bienfait, H G; Albracht, G; Walter, D; Emmel, C; Knecht, U; Päpke, O

1998-04-01

This paper focuses on one aspect of occupational dioxin exposure that is novel and unexpected. Exposures in excess of the German threshold limit value of 50 pg international toxicity equivalent (I-TEQ)/m3 are very frequent, unpredictable, and sometimes very high--up to 6612 pg I-TEQ/m3--during thermal oxygen cutting at scrap metal and demolition sites. The same procedure involving virgin steel in steel trade and mass production of steel objects gave no such evidence, even though no final conclusions can be drawn because of the low number of samples analyzed. Low dioxin exposures during inert gas electric arc welding confirm previous literature findings, whereas soldering and thermal oxygen cutting in the presence of polyvinyl chloride give rise to concern. The consequences of occupational dioxin exposure were studied by analysis of the dioxin-blood concentration, the body burden, of men performing thermal oxygen cutting at scrap metal reclamation and demolition sites, in steel trade and producing plants as well as for industrial welders and white-collar workers. The results concerning body burdens are in excellent agreement with the dioxin exposure as characterized by dioxin air concentration in the workplace. The significant positive correlation between duration and frequency of performing thermal oxygen cutting at metal reclamation and demolition sites expressed in job-years and dioxin body burden speaks for the occupational origin of the observed overload after long times. The results reported here lead to consequences for occupational health, which are discussed and require immediate attention.

Occupational exposure to dioxins by thermal oxygen cutting, welding, and soldering of metals.

PubMed Central

Menzel, H M; Bolm-Audorff, U; Turcer, E; Bienfait, H G; Albracht, G; Walter, D; Emmel, C; Knecht, U; Päpke, O

1998-01-01

This paper focuses on one aspect of occupational dioxin exposure that is novel and unexpected. Exposures in excess of the German threshold limit value of 50 pg international toxicity equivalent (I-TEQ)/m3 are very frequent, unpredictable, and sometimes very high--up to 6612 pg I-TEQ/m3--during thermal oxygen cutting at scrap metal and demolition sites. The same procedure involving virgin steel in steel trade and mass production of steel objects gave no such evidence, even though no final conclusions can be drawn because of the low number of samples analyzed. Low dioxin exposures during inert gas electric arc welding confirm previous literature findings, whereas soldering and thermal oxygen cutting in the presence of polyvinyl chloride give rise to concern. The consequences of occupational dioxin exposure were studied by analysis of the dioxin-blood concentration, the body burden, of men performing thermal oxygen cutting at scrap metal reclamation and demolition sites, in steel trade and producing plants as well as for industrial welders and white-collar workers. The results concerning body burdens are in excellent agreement with the dioxin exposure as characterized by dioxin air concentration in the workplace. The significant positive correlation between duration and frequency of performing thermal oxygen cutting at metal reclamation and demolition sites expressed in job-years and dioxin body burden speaks for the occupational origin of the observed overload after long times. The results reported here lead to consequences for occupational health, which are discussed and require immediate attention. Images Figure 1 PMID:9599722

Up quark mass in lattice QCD with three light dynamical quarks and implications for strong CP invariance.

PubMed

Nelson, Daniel R; Fleming, George T; Kilcup, Gregory W

2003-01-17

A standing mystery in the standard model is the unnatural smallness of the strong CP violating phase. A massless up quark has long been proposed as one potential solution. A lattice calculation of the constants of the chiral Lagrangian essential for the determination of the up quark mass, 2alpha(8)-alpha(5), is presented. We find 2alpha(8)-alpha(5)=0.29+/-0.18, which corresponds to m(u)/m(d)=0.410+/-0.036. This is the first such calculation using a physical number of dynamical light quarks, N(f)=3.

The effect of recent trends in vehicle design on U.S. societal fatality risk per vehicle mile traveled, and their projected future relationship with vehicle mass.

PubMed

Wenzel, Tom

2013-07-01

The National Highway Traffic Safety Administration (NHTSA) recently updated its 2003 and 2010 logistic regression analyses of the effect of a reduction in light-duty vehicle mass on US fatality risk per vehicle mile traveled (VMT). The current NHTSA analysis is the most thorough investigation of this issue to date. LBNL's assessment of the analysis indicates that the estimated effect of mass reduction on risk is smaller than in the previous studies, and statistically non-significant for all but the lightest cars. The effects three recent trends in vehicle designs and technologies have on societal fatality risk per VMT are estimated, and whether these changes might affect the relationship between vehicle mass and fatality risk in the future. Side airbags are found to reduce fatality risk in cars, but not necessarily light trucks or CUVs/minivans, struck in the side by another light-duty vehicle; reducing the number of fatalities in cars struck in the side is predicted to reduce the estimated detrimental effect of footprint reduction, but increase the detrimental effect of mass reduction, in cars on societal fatality risk. Better alignment of light truck bumpers with those of other vehicles appears to result in a statistically significant reduction in risk imposed on car occupants; however, reducing this type of fatality will likely have little impact on the estimated effect of mass or footprint reduction on risk. Finally, shifting light truck drivers into safer, car-based vehicles, such as sedans, CUVs, and minivans, would result in larger reductions in societal fatalities than expected from even substantial reductions in the masses of light trucks. A strategy of shifting drivers from truck-based to car-based vehicles would reduce fuel use and greenhouse gas emissions, while improving societal safety. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effects of Dim Light at Night on Food Intake and Body Mass in Developing Mice.

PubMed

Cissé, Yasmine M; Peng, Juan; Nelson, Randy J

2017-01-01

Appropriately timed light is critical for circadian organization; exposure to dim light at night (dLAN) disrupts temporal organization of endogenous biological timing. Exposure to dLAN in adult mice is associated with elevated body mass and changes in metabolism putatively driven by voluntary changes in the time of food intake. We predicted that exposure of young mice to LAN could affect adult metabolic function. At 3 weeks (Experiment 1) or 5 weeks (Experiment 2) of age, mice were either maintained in standard light-dark (DARK) cycles or exposed to nightly dLAN (5 lux). In the first two experiments, food intake and locomotor activity were assessed after 4 weeks and a glucose tolerance test was administered after 6 weeks in experimental lighting conditions. In Experiment 3, tissues were collected around the clock at 6 h intervals to investigate rhythmic hepatic clock gene expression in mice exposed to dLAN from 3 or 5 weeks of age. Male and female mice exposed to dLAN beginning at 3 weeks of age displayed similar growth rates and body mass to DARK-reared offspring, despite increasing day-time food intake. Exposure to dLAN beginning at 5 weeks of age increased body mass and daytime food intake in male, but not female, mice. Consistent with the body mass phenotype, clock gene expression was unaltered in the liver. In contrast to adults, dLAN exposure during the development of the peripheral circadian system has sex- and development-dependent effects on body mass gain.

Shedding light on the Early Pleistocene of TD6 (Gran Dolina, Atapuerca, Spain): The technological sequence and occupational inferences

PubMed Central

2018-01-01

This paper aims to update the information available on the lithic assemblage from the entire sequence of TD6 now that the most recent excavations have been completed, and to explore possible changes in both occupational patterns and technological strategies evidenced in the unit. This is the first study to analyse the entire TD6 sequence, including subunits TD6.3 and TD6.1, which have never been studied, along with the better-known TD6.2 Homo antecessor-bearing subunit. We also present an analysis of several lithic refits found in TD6, as well as certain technical features that may help characterise the hominin occupations. The archaeo-palaeontological record from TD6 consists of 9,452 faunal remains, 443 coprolites, 1,046 lithic pieces, 170 hominin remains and 91 Celtis seeds. The characteristics of this record seem to indicate two main stages of occupation. In the oldest subunit, TD6.3, the lithic assemblage points to the light and limited hominin occupation of the cave, which does, however, grow over the course of the level. In contrast, the lithic assemblages from TD6.2 and TD6.1 are rich and varied, which may reflect Gran Dolina cave’s establishment as a landmark in the region. Despite the occupational differences between the lowermost subunit and the rest of the deposit, technologically the TD6 lithic assemblage is extremely homogeneous throughout. In addition, the composition and spatial distribution of the 12 groups of lithic refits found in unit TD6, as well as the in situ nature of the assemblage demonstrate the high degree of preservation at the site. This may help clarify the nature of the Early Pleistocene hominin occupations of TD6, and raise reasonable doubt about the latest interpretations that support the ex situ character of the assemblage as a whole. PMID:29370188

Shedding light on the Early Pleistocene of TD6 (Gran Dolina, Atapuerca, Spain): The technological sequence and occupational inferences.

PubMed

Mosquera, Marina; Ollé, Andreu; Rodríguez-Álvarez, Xose Pedro; Carbonell, Eudald

2018-01-01

This paper aims to update the information available on the lithic assemblage from the entire sequence of TD6 now that the most recent excavations have been completed, and to explore possible changes in both occupational patterns and technological strategies evidenced in the unit. This is the first study to analyse the entire TD6 sequence, including subunits TD6.3 and TD6.1, which have never been studied, along with the better-known TD6.2 Homo antecessor-bearing subunit. We also present an analysis of several lithic refits found in TD6, as well as certain technical features that may help characterise the hominin occupations. The archaeo-palaeontological record from TD6 consists of 9,452 faunal remains, 443 coprolites, 1,046 lithic pieces, 170 hominin remains and 91 Celtis seeds. The characteristics of this record seem to indicate two main stages of occupation. In the oldest subunit, TD6.3, the lithic assemblage points to the light and limited hominin occupation of the cave, which does, however, grow over the course of the level. In contrast, the lithic assemblages from TD6.2 and TD6.1 are rich and varied, which may reflect Gran Dolina cave's establishment as a landmark in the region. Despite the occupational differences between the lowermost subunit and the rest of the deposit, technologically the TD6 lithic assemblage is extremely homogeneous throughout. In addition, the composition and spatial distribution of the 12 groups of lithic refits found in unit TD6, as well as the in situ nature of the assemblage demonstrate the high degree of preservation at the site. This may help clarify the nature of the Early Pleistocene hominin occupations of TD6, and raise reasonable doubt about the latest interpretations that support the ex situ character of the assemblage as a whole.

The Extension of Holland's Occupational Classification to All Occupations in the Dictionary of Occupational Titles.

ERIC Educational Resources Information Center

Viernstein, Mary Cowan

Two methods are presented for extending Holland's occupational classification to include all occupations in the Dictionary of Occupational Titles (DOT). Holland's classification is based on a theory of personality types, with occupations in the classification organized into major categories (Realistic, Investigative, Artistic, Social,…

PDE Occupational Competency Assessment Project--1979. Final Report. Occupational Competency Evaluation Monograph, Number 10. Vocational Technical Education Research Report, Volume 17, Number 23.

ERIC Educational Resources Information Center

Funk, Gerald W.

A project continued activity to improve the occupational competency assessment program for evaluating and certifying vocational education teachers. Development of new testing was continued by Temple University, The Pennsylvania State University, and University of Pittsburgh. Workshops for test developers were conducted to ensure standardization of…

Autocorrelations of stellar light and mass at z˜ 0 and ˜1: from SDSS to DEEP2

NASA Astrophysics Data System (ADS)

Li, Cheng; White, Simon D. M.; Chen, Yanmei; Coil, Alison L.; Davis, Marc; De Lucia, Gabriella; Guo, Qi; Jing, Y. P.; Kauffmann, Guinevere; Willmer, Christopher N. A.; Zhang, Wei

2012-01-01

We present measurements of projected autocorrelation functions wp(rp) for the stellar mass of galaxies and for their light in the U, B and V bands, using data from the third data release of the DEEP2 Galaxy Redshift Survey and the final data release of the Sloan Digital Sky Survey (SDSS). We investigate the clustering bias of stellar mass and light by comparing these to projected autocorrelations of dark matter estimated from the Millennium Simulations (MS) at z= 1 and 0.07, the median redshifts of our galaxy samples. All of the autocorrelation and bias functions show systematic trends with spatial scale and waveband which are impressively similar at the two redshifts. This shows that the well-established environmental dependence of stellar populations in the local Universe is already in place at z= 1. The recent MS-based galaxy formation simulation of Guo et al. reproduces the scale-dependent clustering of luminosity to an accuracy better than 30 per cent in all bands and at both redshifts, but substantially overpredicts mass autocorrelations at separations below about 2 Mpc. Further comparison of the shapes of our stellar mass bias functions with those predicted by the model suggests that both the SDSS and DEEP2 data prefer a fluctuation amplitude of σ8˜ 0.8 rather than the σ8= 0.9 assumed by the MS.

Sound of Dark Matter: Searching for Light Scalars with Resonant-Mass Detectors.

PubMed

Arvanitaki, Asimina; Dimopoulos, Savas; Van Tilburg, Ken

2016-01-22

The fine-structure constant and the electron mass in string theory are determined by the values of scalar fields called moduli. If the dark matter takes on the form of such a light modulus, it oscillates with a frequency equal to its mass and an amplitude determined by the local dark-matter density. This translates into an oscillation of the size of a solid that can be observed by resonant-mass antennas. Existing and planned experiments, combined with a dedicated resonant-mass detector proposed in this Letter, can probe dark-matter moduli with frequencies between 1 kHz and 1 GHz, with much better sensitivity than searches for fifth forces.

The integration of daylighting with artificial lighting to enhance building energy performance

NASA Astrophysics Data System (ADS)

Al-Ashwal, Najib Taher; Hassan, Ahmad Sanusi

2017-10-01

In sustainable building designs, daylight is considered as an alternative source of light to artificial lighting. Daylight is an energy-free and efficient-cost lighting source. Natural light is the best source for light due to its good quality, which matches the visual response of the human eyes. Daylight positively affects people by providing a sense of liveliness and brightness in the living space. The positive impact of daylight on the building occupants' visual comfort, health and performance is well recognized. However, daylight is not widely utilized to supplement artificial lighting, because there is a lack of information and tools to evaluate daylighting and potentials for energy savings. The efficient utilization of natural lighting will not only affect the interior environment and the occupants' health and performance but also has a direct impact on the building energy performance. Therefore, this paper reviews and discusses the effects of daylighting on the building energy performance mainly in schools and office buildings. This includes lighting energy performance, total energy consumption, cooling load. The methods, which are used to estimate the possible reduction in total energy consumption, are also reviewed in this research paper. Previous studies revealed that a clear reduction can be obtained in the energy consumed by electric lighting, as well as in the total energy end-use when a suitable lighting control system is applied to utilize the available natural light.

[Current status of occupational health and related countermeasures in Guangzhou, China].

PubMed

Zeng, W F; Wu, S H; Wang, Z; Liu, Y M

2016-02-20

To investigate the current status of occupational health and related countermeasures in Guangzhou, China. Related data were collected from occupational poisoning accident investigation, diagnosis and identification of occupational diseases, and the occupational disease hazard reporting system, and the statistical data of occupational health in Guangzhou were analyzed retrospectively. The number of enterprises reporting for occupational disease hazards in Guangzhou was 20 890, and the total number of workers was 1 457 583. The number of workers exposed to occupational hazards was 284 233, and the cumulative number of workers with occupational diseases was 1 502. There were many risk factors for occupational diseases in enterprises, and there were a large number of workers with occupational diseases, as well as newly diagnosed cases. From 2001 to 2014, the total number of cases of occupational diseases was 958. The situation for the prevention and control of occupational diseases is grim in Guangzhou. Occupational health supervision and law enforcement should be enhanced, the three-level supervision system should be established and perfected, and the occupational health supervision system with a combination of "prevention, treatment, and protection" should be established and promoted, so as to gradually establish a technical service support system for occupational health.

Teacher's Guide to Occupational Orientation.

ERIC Educational Resources Information Center

National Evaluation Systems, Inc., Amherst, MA.

This guide is specifically designed to accompany materials developed for occupational orientation (particularly in Illinois) in the following five cluster areas: Applied biological and agricultural occupations; personal and public service occupations; health occupations; business, marketing, and management occupations; and industrial oriented…

Testing light-traces-mass in Hubble Frontier Fields Cluster MACS-J0416.1-2403

DOE PAGES

Sebesta, Kevin; Williams, Liliya L. R.; Mohammed, Irshad; ...

2016-06-17

Here, we reconstruct the projected mass distribution of a massive merging Hubble Frontier Fields cluster MACSJ0416 using the genetic algorithm based free-form technique called Grale. The reconstructions are constrained by 149 lensed images identified by Jauzac et al. using HFF data. No information about cluster galaxies or light is used, which makes our reconstruction unique in this regard. Using visual inspection of the maps, as well as galaxy-mass correlation functions we conclude that overall light does follow mass. Furthermore, the fact that brighter galaxies are more strongly clustered with mass is an important confirmation of the standard biasing scenario inmore » galaxy clusters. On the smallest scales, approximately less than a few arcseconds, the resolution afforded by 149 images is still not sufficient to confirm or rule out galaxy-mass offsets of the kind observed in ACO 3827. We also compare the mass maps of MACSJ0416 obtained by three different groups: Grale, and two parametric Lenstool reconstructions from the CATS and Sharon/Johnson teams. Overall, the three agree well; one interesting discrepancy between Grale and Lenstool galaxy-mass correlation functions occurs on scales of tens of kpc and may suggest that cluster galaxies are more biased tracers of mass than parametric methods generally assume.« less

Testing light-traces-mass in Hubble Frontier Fields Cluster MACS-J0416.1-2403

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sebesta, Kevin; Williams, Liliya L. R.; Mohammed, Irshad

Here, we reconstruct the projected mass distribution of a massive merging Hubble Frontier Fields cluster MACSJ0416 using the genetic algorithm based free-form technique called Grale. The reconstructions are constrained by 149 lensed images identified by Jauzac et al. using HFF data. No information about cluster galaxies or light is used, which makes our reconstruction unique in this regard. Using visual inspection of the maps, as well as galaxy-mass correlation functions we conclude that overall light does follow mass. Furthermore, the fact that brighter galaxies are more strongly clustered with mass is an important confirmation of the standard biasing scenario inmore » galaxy clusters. On the smallest scales, approximately less than a few arcseconds, the resolution afforded by 149 images is still not sufficient to confirm or rule out galaxy-mass offsets of the kind observed in ACO 3827. We also compare the mass maps of MACSJ0416 obtained by three different groups: Grale, and two parametric Lenstool reconstructions from the CATS and Sharon/Johnson teams. Overall, the three agree well; one interesting discrepancy between Grale and Lenstool galaxy-mass correlation functions occurs on scales of tens of kpc and may suggest that cluster galaxies are more biased tracers of mass than parametric methods generally assume.« less

Compact Quantum Random Number Generator with Silicon Nanocrystals Light Emitting Device Coupled to a Silicon Photomultiplier

NASA Astrophysics Data System (ADS)

Bisadi, Zahra; Acerbi, Fabio; Fontana, Giorgio; Zorzi, Nicola; Piemonte, Claudio; Pucker, Georg; Pavesi, Lorenzo

2018-02-01

A small-sized photonic quantum random number generator, easy to be implemented in small electronic devices for secure data encryption and other applications, is highly demanding nowadays. Here, we propose a compact configuration with Silicon nanocrystals large area light emitting device (LED) coupled to a Silicon photomultiplier to generate random numbers. The random number generation methodology is based on the photon arrival time and is robust against the non-idealities of the detector and the source of quantum entropy. The raw data show high quality of randomness and pass all the statistical tests in national institute of standards and technology tests (NIST) suite without a post-processing algorithm. The highest bit rate is 0.5 Mbps with the efficiency of 4 bits per detected photon.

[The System and Human Resources for Occupational Health in Thailand - For Japanese Enterprises to Manage Proper Occupational Health Activities at Overseas Workplaces].

PubMed

Fukai, Nanae; Hiraoka, Ko; Kajiki, Shigeyuki; Kobayashi, Yuichi; Thanachokswang, Chatchai; Arphorn, Sara; Uehara, Msamichi; Nakanishi, Shigemoto; Mori, Koji

We collected information necessary for conducting occupational health activities in Thailand with regard to occupational safety and health management systems (OSHMS). Based on an information collection check sheet developed in our previous research, we conducted a literature research and visited four local business bases, one ISO certification body and two higher educational institutions. The legal framework concerning occupational health in Thailand consists of the Occupational Safety, Health and Environment Act of 2011 and 13 ordinances from the Ministry of Labor under that act. The original OSHMS standards for Thailand have been published, and the number of companies, especially large ones, introducing systems conforming to these standards has increased in recent years. For occupational health specialists, there are training programs for specialized occupational health physicians, professional safety officers and occupational nurses. Professional safety officers also play a central role in occupational health in the workplace. In Thailand, it is necessary to ensure compliance with related acts and regulations, and to conduct voluntary activities that satisfy workplace conditions as based on the OSHMS standards. Additionally, to improve occupational health performance, it is essential to use high-quality external services and/or occupational health professionals. Headquarters of Japanese companies have considered taking countermeasures such as recommending active use of professional safety officers, as well as issuing global standards.

An examination of occupation-based, client-centered, evidence-based occupational therapy practices in New Hampshire.

PubMed

Mulligan, Shelley; White, Barbara Prudhomme; Arthanat, Sajay

2014-01-01

This study surveyed occupational therapy practitioners to gain a better understanding of the nature of occupational therapy practices in the State of New Hampshire. A questionnaire was developed and distributed to a sample of practitioners working in New Hampshire to gather information regarding the extent to which occupation-based, client-centered, evidence-based services were being provided. Results suggested that practitioners highly value these service delivery attributes. However, day-to-day practice decisions regarding evaluation methods, where to conduct intervention sessions, goal writing, and choices of intervention activities suggest a stronger emphasis on the evaluation and remediation of specific performance skill and body function deficits, rather than on client performance of desired occupations. In light of the findings, the discrepancy between practitioner values and daily clinical practices is discussed, along with the challenges inherent in providing authentic, evidence-based occupational therapy. Copyright 2014, SLACK Incorporated.

Occupational exposure to particulate air pollution and mortality due to ischaemic heart disease and cerebrovascular disease

PubMed Central

Torén, Kjell; Bergdahl, Ingvar A; Nilsson, Tohr; Järvholm, Bengt

2007-01-01

Objectives A growing number of epidemiological studies are showing that ambient exposure to particulate matter air pollution is a risk factor for cardiovascular disease; however, whether occupational exposure increases this risk is not clear. The aim of the present study was to examine whether occupational exposure to particulate air pollution increases the risk for ischaemic heart disease and cerebrovascular disease. Methods The study population was a cohort of 176 309 occupationally exposed Swedish male construction workers and 71 778 unexposed male construction workers. The definition of exposure to inorganic dust (asbestos, man‐made mineral fibres, dust from cement, concrete and quartz), wood dust, fumes (metal fumes, asphalt fumes and diesel exhaust) and gases and irritants (organic solvents and reactive chemicals) was based on a job‐exposure matrix with focus on exposure in the mid‐1970s. The cohort was followed from 1971 to 2002 with regard to mortality to ischaemic heart disease and cerebrovascular disease. Relative risks (RR) were obtained by the person‐years method and from Poisson regression models adjusting for baseline values of blood pressure, body mass index, age and smoking habits. Results Any occupational particulate air pollution was associated with an increased risk for ischemic heart disease (RR 1.13, 95% CI 1.07 to 1.19), but there was no increased risk for cerebrovascular disease (RR 0.97, 95% CI 0.88 to 1.07). There was an increased risk for ischaemic heart disease and exposure to inorganic dust (RR 1.07, 95% CI 1.03 to 1.12) and exposure to fumes (RR 1.05, 95% CI 1.00 to 1.10), especially diesel exhaust (RR 1.18, 95% CI 1.13 to 1.24). There was no significantly increased risk for cerebrovascular disease and exposure to inorganic dust, fumes or wood dust. Conclusions Occupational exposure to particulate air pollution, especially diesel exhaust, among construction workers increases the risk for ischaemic heart disease. PMID

On the stability of the fragments and associated properties at the peak center-of-mass energy of light fragments

NASA Astrophysics Data System (ADS)

Bansal, Preeti

2016-05-01

We simulate semi-central symmetric system reactions, for center-of-mass energies at which maximal number of light fragments (2 ≤ A ≤ 4) occurs and at a fixed Ec.m. = 60 AMeV. The study was carried out with soft EOS using isospin-dependent quantum molecular dynamics (IQMD) model. We studied various properties of fragments at peak Ec.m. and also at constant energy (Ec.m. = 60 AMeV) to find out the relative difference between the properties at both energies.

[Hygiene and legal aspects of occupational exposure assessment to cytostatics].

PubMed

Kupczewska-Dobecka, Małgorzata; Pałaszewska-Tkacz, Anna; Czerczak, Sławomir; Konieczko, Katarzyna

2018-01-01

The employers responsibilities for the assessment of occupational exposure to cytostatics in the workplace were analyzed in the light of existing legal regulations. Cytostatics may pose a threat to health and life of workers taking care of patients treated oncologically, i.e., pharmacists, physicians, nurses and other personnel. The significant scale of occupational exposure to cytostatics in Poland is confirmed by the data collected in the Central Register of Data on Exposure to Carcinogenic or Mutagenic Substances, Mixtures, Agents or Technological Processes, maintained by the Nofer Institute of Occupational Medicine, Łódź, Poland. The issue of occupational risk assessment of exposure to cytostatics gives raise to numerous concerns. Polish regulations concerning health protection of employees occupationally exposed to cytostatics are not unequivocal, as they are derived from different areas of the law, especially those applying to hazard classification, labeling and preparation of safety data sheets for cytostatics. There are neither binding occupational exposure limits legally set for active compounds of antineoplastic drugs nor methods for monitoring of these substances concentrations in a worker's breathing zone and biological material. This prevents the employer to carry out the correct assessment of occupational exposure, the results of which are the basis for preparing the proper preventive strategy. In this article the consequences of amendments to the European chemical legislation for employers responsible for adequate protection of health and life of employees exposed to cytostatics, were discussed, as well as some legal changes aimed at a better health and life protection of workers exposed to cytostatics in a workplace were proposed. Med Pr 2018;69(1):77-92. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Workplace fire-not a misfortune, but an avoidable occupational hazard in Korea.

PubMed

Park, Ji-Eun; Kim, Myoung-Hee

2015-02-01

In this article, we argue that workplace fire should be understood within an occupational safety and health context. We selected two cases of fire and explosion with the greatest numbers of fatalities from the annual lists of the "Worst Manslaughter Companies of the Year" in Korea. Through review of information from major media, government, courts, and workers' advocacy organizations, we found that these incidents resulted from violations of basic safety rules by the companies, and that the penalties imposed on them were light. In addition, precarious workers were more vulnerable to such risk, and self-regulation did not work even in large corporations. Like other types of occupational hazards, explosions and fires can be prevented, but prevention requires that occupational safety and health regulations be thoroughly enforced and that heavy penalties be imposed in order to eliminate any incentives for regulatory violations. © 2015 SAGE Publications.

Miniature chemical ionization mass spectrometer for light aircraft measurements of tropospheric ammonia

NASA Astrophysics Data System (ADS)

Silver, J. A.; Bomse, D. S.; Massick, S. M.; Zondlo, M. A.

2003-12-01

Tropospheric ammonia plays important roles in the nucleation, growth, composition, and chemistry of aerosol particles. Unfortunately, high frequency and sensitive measurements of gas phase ammonia are lacking in most airborne-based field campaigns. Chemical ionization mass spectrometers (CIMS) have shown great promise for ammonia measurements, but CIMS instruments typically consume large amounts of power, are highly labor intensive, and are very heavy for most airborne platforms. These characteristics of CIMS instruments severely limit their potential deployment on smaller and lighter aircraft, despite the strong desire for ammonia measurements in atmospheric chemistry field campaigns. To this end, a CIMS ammonia instrument for light aircraft is being developed using a double-focusing, miniature mass spectrometer. The size of the mass spectrometer, comparable to a small apple, allows for higher operating pressures (0.1 mTorr) and lower pumping requirements. Power usage, including pumps and electronics, is estimated to be around 300 W, and the overall instrument including pumps, electronics, and permeation cells is expected to be about the size of a small monitor. The ion source uses americium-241 to generate protonated water ions which proton transfer to form ammonium ions. The ion source is made with commercially available ion optics to minimize machining costs. Mass spectra over its working range (~ 5-120 amu) are well represented by Gaussian shaped peaks. By examining the peak widths as a function of mass location, the resolution of the instrument was determined experimentally to be around 110 (m/delta m). The sensitivity, selectivity, power requirements, size, and performance characteristics of the miniature mass spectrometer will be described along with the possibilities for CIMS measurements on light aircraft.

TRACTOR REPAIR. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 16.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

THE PURPOSE OF THIS GUIDE IS TO HELP TEACHERS PREPARE POSTSECONDARY STUDENTS FOR THE AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS. IT WAS DESIGNED BY A NATIONAL TASK FORCE ON THE BASIS OF RESEARCH FROM STATE STUDIES. THE MAJOR OBJECTIVE IS TO DEVELOP (1) AN UNDERSTANDING OF THE…

Occupational exposure to glycol ethers: implications for occupational health nurses.

PubMed

Snow, J E

1994-09-01

1. Evaluation of workplace exposure to reproductive hazards is difficult and is often confounded by occupational exposure to multiple agents and exposure to non-occupational factors. 2. A growing body of evidence from animal and human study data supports a causal association between occupational exposure to certain glycol ethers and adverse reproductive outcomes. 3. Occupational health nurses providing services to employees exposed to glycol ethers should remain knowledgeable about the results of epidemiologic studies and current trends in the regulation of glycol ethers in industry. 4. Occupational health nurses are in a key position to reduce exposure to reproductive hazards by monitoring trends in group data and by implementing training and education programs to employees exposed to reproductive hazards.

High-risk occupations for women exposed to cadmium.

PubMed

Freeman, C S

1994-08-01

Occupational exposures to cadmium are associated with increased risk of lung cancer and renal disease. The Occupational Safety and Health Administration (OSHA) published two standards for cadmium on September 14, 1992 that reduced the permissible occupational exposure limit. In the cadmium industry, women were less likely to be exposed to high levels of cadmium and more likely to hold job titles containing the word "hand" than were men. Only small numbers of female workers were exposed to any level of cadmium. OSHA's risk assessment relied, in part, on morbidity and mortality data from male workers and in part on rodent (animal) data from both sexes. OSHA did not evaluate illness rates specific to female workers. Several factors may alter the risk of these illnesses and their sequelae among workers, including differences in smoking, route of exposures, ability to wear personal protective equipment, and lifestyle.

African Immigrants in Low-Wage Direct Health Care: Motivations, Job Satisfaction, and Occupational Mobility.

PubMed

Covington-Ward, Yolanda

2017-06-01

This study explores motivations, job satisfaction, and overall perceived occupational mobility for African immigrants working in low-wage direct health care occupations. The study uses qualitative semi-structured interviews with a sample of thirty African immigrant workers in the greater Pittsburgh metropolitan area. Results show that four major themes captured the motivations of interviewees for doing direct care work: passion for care work, quick money, easily obtained employment, and direct care work as a pathway to other health occupations. The majority of the interviewees were satisfied with their jobs, yet almost all of them saw their occupations as temporary or transitional employment. Most of the interviewees also saw their jobs as lacking occupational mobility. In light of the increased national demand for direct care workers, the growing numbers of immigrants in the direct care labor force, and the high turnover and low retention rates of direct care workers overall, the study suggests that more must be done to make direct care work attractive and rewarding for African immigrant workers.

Immigrant Experiences of Occupational Downgrading: Their Stories in Light of Possible Selves Theory

ERIC Educational Resources Information Center

Adversario, Jan

2017-01-01

This qualitative phenomenological study examined the occupational downgrading experiences of six adult immigrants. Occupational downgrading happens when an individual's occupation post immigration does not match his or her education credentials and previous professional experiences. The goal was to make sense of the participants' narratives…

Two-loop matching factors for light quark masses and three-loop mass anomalous dimensions in the RI/SMOM schemes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sturm, C.; Almeida, L.

2010-04-26

Light quark masses can be determined through lattice simulations in regularization invariant momentum-subtraction (RI/MOM) schemes. Subsequently, matching factors, computed in continuum perturbation theory, are used in order to convert these quark masses from a RI/MOM scheme to the {ovr MS} scheme. We calculate the two-loop corrections in QCD to these matching factors as well as the three-loop mass anomalous dimensions for the RI/SMOM and RI/SMOM{sub {gamma}{mu}} schemes. These two schemes are characterized by a symmetric subtraction point. Providing the conversion factors in the two different schemes allows for a better understanding of the systematic uncertainties. The two-loop expansion coefficients ofmore » the matching factors for both schemes turn out to be small compared to the traditional RI/MOM schemes. For n{sub f} = 3 quark flavors they are about 0.6%-0.7% and 2%, respectively, of the leading order result at scales of about 2 GeV. Therefore, they will allow for a significant reduction of the systematic uncertainty of light quark mass determinations obtained through this approach. The determination of these matching factors requires the computation of amputated Green's functions with the insertions of quark bilinear operators. As a by-product of our calculation we also provide the corresponding results for the tensor operator.« less

Photoluminescence Analysis of White-Light-Emitting Si Nanoparticles Using Effective Mass Approximation Method

NASA Astrophysics Data System (ADS)

Lee, Soojin; Cho, Woon Jo; Kim, Yang Do; Kim, Eun Kyu; Park, Jae Gwan

2005-07-01

White-light-emitting Si nanoparticles were prepared from the sodium silicide (NaSi) precursor. The photoluminescence of colloidal Si nanoparticles has been fitted by effective mass approximation (EMA). We analyzed the correlation between experimental photoluminescence and simulated fitting curves. Both the mean diameter and the size dispersion of the white-light-emitting Si nanoparticles were estimated.

Occupational/Technical Programs at Piedmont Virginia Community College. Research Report Number 3-91.

ERIC Educational Resources Information Center

Head, Ronald B.

In 1991, a study was conducted at Piedmont Virginia Community College (PVCC) to identify key trends and provide information regarding occupational/technical programs at PVCC, particularly with respect to student enrollment, student completion, and occupational opportunities for graduates. Major findings of the study included the following: (1)…

The mass of the black hole in 1A 0620-00, revisiting the ellipsoidal light curve modelling

NASA Astrophysics Data System (ADS)

van Grunsven, Theo F. J.; Jonker, Peter G.; Verbunt, Frank W. M.; Robinson, Edward L.

2017-12-01

The mass distribution of stellar-mass black holes can provide important clues to supernova modelling, but observationally it is still ill constrained. Therefore, it is of importance to make black hole mass measurements as accurate as possible. The X-ray transient 1A 0620-00 is well studied, with a published black hole mass of 6.61 ± 0.25 M⊙, based on an orbital inclination i of 51.0° ± 0.9°. This was obtained by Cantrell et al. (2010) as an average of independent fits to V-, I- and H-band light curves. In this work, we perform an independent check on the value of i by re-analysing existing YALO/SMARTS V-, I- and H-band photometry, using different modelling software and fitting strategy. Performing a fit to the three light curves simultaneously, we obtain a value for i of 54.1° ± 1.1°, resulting in a black hole mass of 5.86 ± 0.24 M⊙. Applying the same model to the light curves individually, we obtain 58.2° ± 1.9°, 53.6° ± 1.6° and 50.5° ± 2.2° for V-, I- and H-band, respectively, where the differences in best-fitting i are caused by the contribution of the residual accretion disc light in the three different bands. We conclude that the mass determination of this black hole may still be subject to systematic effects exceeding the statistical uncertainty. Obtaining more accurate masses would be greatly helped by continuous phase-resolved spectroscopic observations simultaneous with photometry.

Photon-Number-Resolving Transition-Edge Sensors for the Metrology of Quantum Light Sources

NASA Astrophysics Data System (ADS)

Schmidt, M.; von Helversen, M.; López, M.; Gericke, F.; Schlottmann, E.; Heindel, T.; Kück, S.; Reitzenstein, S.; Beyer, J.

2018-05-01

Low-temperature photon-number-resolving detectors allow for direct access to the photon number distribution of quantum light sources and can thus be exploited to explore the photon statistics, e.g., solid-state-based non-classical light sources. In this work, we report on the setup and calibration of a detection system based on fiber-coupled tungsten transition-edge sensors (W-TESs). Our stand-alone system comprises two W-TESs, read out by two 2-stage-SQUID current sensors, operated in a compact detector unit that is integrated in an adiabatic demagnetization refrigerator. Fast low-noise analog amplifiers and digitizers are used for signal acquisition. The detection efficiency of the single-mode fiber-coupled detector system in the spectral region of interest (850-950 nm) is determined to be larger than 87 %. The presented detector system opens up new routes in the characterization of quantum light sources for quantum information, quantum-enhanced sensing and quantum metrology.

[Physicians' tasks in the Occupational Health Services].

PubMed

von Bülow, B A

1995-03-06

The aim of this study was to describe the kind of present and future tasks doctors employed in the Occupational Health Service (OHS) in Denmark carried out and to shed light on the reasons why only a moderate number of doctors are employed in the OHS. Additional aims were to map out the number of engaged part-time and full-time doctors in the OHS in Denmark compared with the number of other professionals engaged in the OHS. The study was based on questionnaires sent out to all 109 OHS units in Denmark and to all the doctors employed in the OHS. Ten persons in the OHS were strategically selected for an open interview. There were still only a very few doctors (9%) employed in the OHS in comparison to the other professionals employed in OHS, (nurses, various therapists and technicians) and the doctors were mostly engaged part-time; most of them for less than 10 hours a week. The moderate number of doctors was amongst other things explained by the relatively high cost of the doctors' salaries and the doctors having a reputation for being arrogant and dominating. The doctors were in general very experienced in occupational health matters and solved many problems which required a doctors education. A great deal of the problems they solved were in finding the causality between the workers' symptoms and the working-place conditions. The doctors suggested several future tasks for OHS, e.g. to evaluate its preventive results and to participate in a higher degree when planning working environments.

Second-level post-occupancy evaluation (POE) analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, B.; Fisher, W.; Marans, R.W.

1989-02-14

Findings from a detailed analysis of post-occupancy evaluation data, sponsored by LRI, which involved thirteen office buildings typical of current design practice, will be discussed. Analysis of the data indicates that occupant satisfaction can be related to type of lighting system, presence of daylight, and patterns of luminance in the office. 15 refs., 9 figs., 3 tabs.

Enabling occupation at the end of life: A literature review.

PubMed

Mills, Katherine; Payne, Angela

2015-12-01

Occupation, or meaningful activity, can contribute to the well-being and quality of life of all individuals. It is thus a logical tautology that occupation should be enabled for those at the end of life. Our present review examines current provision of these processes by Occupational Therapist, who can be much-valued members of multidisciplinary palliative care teams. Following a literature search and critical selection, 10 global papers were identified examining occupation and occupational therapy at the end of life in the acute, hospice, and community environments. Universally, there appeared to be a dearth of therapists working in end-of-life care. Provision of palliative care in hospitals was found to be compensatory or rehabilitative. Hospice therapy emerged as pleasingly occupational, though the number of hospice places was disappointingly few. Community literature was sparse, so it proved challenging to draw definitive conclusions. Promising research refracted light on occupation at home; however, it also revealed stretched domiciliary services, where clients are not well informed about the potential scope of occupational therapy. A "good death" involving a quality end-of-life experience is the foundational goal overarching all therapy and medicine in the provision of palliative care. Arguably, an occupation-focused approach provided by therapists meets client needs to enable meaningful experiences in the limited time left to them. Current occupational therapy practice environments are not necessarily achieving these goals in commensurate fashion. There is a need to promote the role of occupational therapy and circumscribe what therapists can offer. Further research is necessitated across all environments and future funding for therapist positions in palliative teams. End-of-life care can be complex and challenging; however, therapists can facilitate fulfillment of client-centered occupational goals. In engaging with personally constructed nuances of meaning

Energy Edge Post-Occupancy Evaluation Project: The Emerald People's Utility District Building (EPUD) Eugene, Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-06-01

The Workspace Satisfaction Survey measures occupant satisfaction with the thermal, lighting, acoustical, and air quality aspects of the work environment. In addition to ratings of these ambient environmental features, occupants also rate their satisfaction with a number of functional and aesthetic features of the office environment as well as their satisfaction with specific kinds of workspaces (e.g., computer rooms, the lobby, employee lounge, etc.). Each section on ambient conditions includes questions on the frequency with which people experience particular kinds of discomforts or problems, how much the discomfort bothers them, and how much it interferes with their work. Occupants aremore » also asked to identify how they cope with discomfort or environmental problems, and to what extent these behaviors enable them to achieve more satisfactory conditions. This report documents the results of this survey of the occupants of the Emerald People's Utility District office building in Eugene, Oregon.« less

Extending Beyond Qualitative Interviewing to Illuminate the Tacit Nature of Everyday Occupation: Occupational Mapping and Participatory Occupation Methods.

PubMed

Huot, Suzanne; Rudman, Debbie Laliberte

2015-07-01

The study of human occupation requires a variety of methods to fully elucidate its complex, multifaceted nature. Although qualitative approaches have commonly been used within occupational therapy and occupational science, we contend that such qualitative research must extend beyond the sole use of interviews. Drawing on qualitative methodological literature, we discuss the limits of interview methods and outline other methods, particularly visual methods, as productive means to enhance qualitative research. We then provide an overview of our critical ethnographic study that used narrative, visual, and observational methods to explore the occupational transitions experienced by immigrants to Canada. We describe our use of occupational mapping and participatory occupation methods and the contributions of these combined methods. We conclude that adopting a variety of methods can enable a deeper understanding of the tacit nature of everyday occupation, and is key to advancing knowledge regarding occupation and to informing occupational therapy practice.

The terms occupation and activity over the history of official occupational therapy publications.

PubMed

Bauerschmidt, Bree; Nelson, David L

2011-01-01

The history of articles in the American Journal of Occupational Therapy and its predecessors reflects trends and changes in professional terminology and the thoughts underlying that terminology. In this study, we investigate use of occupation, activity, and related terms across 9 decades of occupational therapy literature from the 1920s to the 2000s. The literature for 3 years of each of the 9 decades was scanned electronically. A random numbers table was used to equalize the number of words across decades, and a computer search function was used to determine each term's frequency of use for each decade. Results indicated that the term occupation was widely used in the 1920s but then declined until the 1980s. With a rapid increase in use in the 2000s, the term occupation actually appeared more often than it did in the 1920s. The term activity appeared infrequently in the 1920s but gained popularity from the 1930s to the 1960s. From the 1970s to the 1990s, the use of both terms was quite low. This study shows that basic occupational therapy terminology has fluctuated dramatically over time. Given the essential link between terminology and theory, these changes arguably reflect authors' and editors' changing viewpoints on the profession's fundamental nature.

The optical light curve of the low-mass X-ray binary GX 9 + 9

NASA Technical Reports Server (NTRS)

Schaefer, Bradley E.

1990-01-01

The detection of a small modulation in the light curve of the GX 9 + 9 optical counterpart at the same period as determined from the X-ray data is reported. The optical variability is roughly sinusoidal in shape with a period of 4.198 + or - 0.0094 hours and an average peak-to-peak amplitude in the B of 0.19 mag with comparable amplitudes in the V and R bandpasses, and has superposed flickering with a typical amplitude of six percent. The mass of the companion star is deduced to be 0.4 solar mass, which corresponds to an early M-type star. The bulk of the optical light arises in the accretion disk, while the variability arises from orbital modulation of the light reprocessed off the companion star and a bright spot. It is suggested that the X-ray modulation might be due to the asymmetries of X-rays reflected off the bright spot.

Evaluating office lighting environments: Second-level analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, B.L.; Fisher, W.S.; Gillette, G.L.

1989-04-01

Data from a post-occupancy evaluation (POE) of 912 work stations with lighting power density (LPD), photometric, and occupant-response measures were examined in a detailed, second-level analysis. Seven types of lighting systems were identified with different combinations of direct and indirect ambient lighting, and task lighting and daylight. The mean illuminances at the primary task location were within the IES target values for office task with a range of mean illuminances from 32 to 75 fc, depending on the lighting system. The median LPD was about 2.36 watts/sq ft, with about one-third the work stations having LPD's at or below 2.0more » watts/sq ft. Although a majority of the occupants (69%) were satisfied about their lighting, the highest percentage of those expressing dissatisfaction (37%) with lighting had an indirect fluorescent furniture-mounted (IFFM) system. The negative reaction of so many people to the IFFM system suggests that the combination of task lighting with an indirect ambient system had an important influence on lighting satisfaction, even though task illuminances tended to be higher with the IFFM system. Concepts of lighting quality, visual health, and control were explored, as well as average luminance to explain the negative reactions to the combination of indirect lighting with furniture-mounted lighting.« less

Principal Approaches to Understanding Occupation and Occupational Science Found in the Chilean Journal of Occupational Therapy (2001-2012).

PubMed

Morrison, Rodolfo; Gómez, Silvia; Henny, Enrique; Tapia, María Jesús; Rueda, Laura

2017-01-01

The progression of occupational science in Chile is documented in the main scientific publication of the field, the Chilean Journal of Occupational Therapy (RChTO). Identify approaches to understanding and applying occupation and occupational science as elucidated in the RChTO. A systematic qualitative review of the journal (2001-2012) identified articles elucidating an approach to understanding and application operationally defined as references to specific authors, theories, models/paradigms, definitions, and other fields that support approaches to O/OS. The study identified two main approaches. The first considers occupation/occupational science from a practical perspective or as a means to explain human behavior; the second considers occupation/occupational science as an object of study. Each approach is further divided into categories. This study provides a novel perspective on regional use of occupational science concepts. These findings contribute to our understanding of this science in context and to recognition of the cultural relevance of these scientific concepts.

Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting at T.J.Maxx in Manchester, NH Phase I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myer, Michael; Goettel, Russell T.

2010-06-29

A report describing the process and results of replacing existing parking lot lighting, looking at a LED option with occupancy sensors, and conventional alternates. Criteria include payback, light levels, occupant satisfaction. This report is Phase I of II. Phase I deals with initial installation.

Estimating Upper Bounds for Occupancy and Number of Manatees in Areas Potentially Affected by Oil from the Deepwater Horizon Oil Spill

PubMed Central

Martin, Julien; Edwards, Holly H.; Bled, Florent; Fonnesbeck, Christopher J.; Dupuis, Jérôme A.; Gardner, Beth; Koslovsky, Stacie M.; Aven, Allen M.; Ward-Geiger, Leslie I.; Carmichael, Ruth H.; Fagan, Daniel E.; Ross, Monica A.; Reinert, Thomas R.

2014-01-01

The explosion of the Deepwater Horizon drilling platform created the largest marine oil spill in U.S. history. As part of the Natural Resource Damage Assessment process, we applied an innovative modeling approach to obtain upper estimates for occupancy and for number of manatees in areas potentially affected by the oil spill. Our data consisted of aerial survey counts in waters of the Florida Panhandle, Alabama and Mississippi. Our method, which uses a Bayesian approach, allows for the propagation of uncertainty associated with estimates from empirical data and from the published literature. We illustrate that it is possible to derive estimates of occupancy rate and upper estimates of the number of manatees present at the time of sampling, even when no manatees were observed in our sampled plots during surveys. We estimated that fewer than 2.4% of potentially affected manatee habitat in our Florida study area may have been occupied by manatees. The upper estimate for the number of manatees present in potentially impacted areas (within our study area) was estimated with our model to be 74 (95%CI 46 to 107). This upper estimate for the number of manatees was conditioned on the upper 95%CI value of the occupancy rate. In other words, based on our estimates, it is highly probable that there were 107 or fewer manatees in our study area during the time of our surveys. Because our analyses apply to habitats considered likely manatee habitats, our inference is restricted to these sites and to the time frame of our surveys. Given that manatees may be hard to see during aerial surveys, it was important to account for imperfect detection. The approach that we described can be useful for determining the best allocation of resources for monitoring and conservation. PMID:24670971

HQE parameters from unquenched lattice data on pseudoscalar and vector heavy-light meson masses

NASA Astrophysics Data System (ADS)

Gambino, Paolo; Melis, Aurora; Simula, Silvano

2018-03-01

We present a new lattice determination of some of the parameters appearing both in the Operator Product Expansion (OPE) analysis of the inclusive semileptonic B-meson decays and in the Heavy Quark Expansion (HQE) of the pseudoscalar (PS) and vector (V) heavy-light meson masses. We perform a lattice QCD (LQCD) computation of PS and V heavy-light meson masses for heavy-quark masses mh in the range from mcphys to ≃ 4mbphys. We employed the Nf = 2 + 1 + 1 gauge configurations of the European Twisted Mass Collaboration (ETMC) at three values of the lattice spacing a ≃ (0.062,0.082,0.089) fm with pion masses in the range Mπ ≃ (210 - 450) MeV. The heavy-quark mass is simulated directly on the lattice up to ≃ 3mcphys. The interpolation to the physical mbphys is performed using the ETMC ratio method and adopting the kinetic mass scheme. We obtain mbkin (1 GeV) = 4.61(20) GeV (m̅b(m̅b) = 4.26(18) GeV in the MS scheme). The lattice data are analyzed in terms of the HQE and the matrix elements of dimension-4 and dimension-5 operators are extracted with good precision, namely: Λ¯ = 0.552(26) GeV, μπ2 = 0.321(32) GeV2 and μG2(mb) = 0.253(25)GeV2. The data also allow for an estimate of the dimension-6 operator matrix elements.

Pennsylvania Occupational Competency Assessment Program--1983. Final Report. Vocational-Technical Education Research Report, Volume 22, Number 2. Occupational Competency Evaluation Monograph, Number 15.

ERIC Educational Resources Information Center

Walter, Richard A.

The Pennsylvania State University served as the Pennsylvania Coordinator of Occupational Competency Assessment (OCA). It managed the Pennsylvania OCA Program, which provides the secondary public schools of the state with competent vocational instructors as a component of teacher preparation at Temple University, Indiana University of Pennsylvania,…

On the stability of the fragments and associated properties at the peak center-of-mass energy of light fragments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bansal, Preeti

We simulate semi-central symmetric system reactions, for center-of-mass energies at which maximal number of light fragments (2 ≤ A ≤ 4) occurs and at a fixed E{sub c.m.} = 60 AMeV. The study was carried out with soft EOS using isospin-dependent quantum molecular dynamics (IQMD) model. We studied various properties of fragments at peak E{sub c.m.} and also at constant energy (E{sub c.m.} = 60 AMeV) to find out the relative difference between the properties at both energies.

Developing probabilistic models to predict amphibian site occupancy in a patchy landscape

Treesearch

R. A. Knapp; K.R. Matthews; H. K. Preisler; R. Jellison

2003-01-01

Abstract. Human-caused fragmentation of habitats is threatening an increasing number of animal and plant species, making an understanding of the factors influencing patch occupancy ever more important. The overall goal of the current study was to develop probabilistic models of patch occupancy for the mountain yellow-legged frog (Rana muscosa). This once-common species...

[Occupational exposure to hand-transmitted vibration in Poland].

PubMed

Harazin, Barbara; Zieliński, Grzegorz

2004-01-01

Occupational exposure to hand transmitted vibration may cause disorders in upper extremities known as hand-arm vibration syndrome. Therefore it is essential to know the sources of vibration, occupational groups exposed to vibration and the number of exposed workers. The aim of the study was to estimate the number of men and women exposed to hand-transmitted vibration in Poland. The completed questionnaires were obtained from 265 (80%) sanitary inspection stations. They included questions on: the name of workplaces, the name and the type of vibration sources, workers' gender, the number of workers exposed to vibration, indicating the extent of exposure measured against the three threshold limit values (< 0.5 TLV; 0.5 < TLV < 1 and > 1 TLV), and the number of workers exposed to hand-transmitted vibration not documented by measurements in a particular workplaces, indicating one of the three possible kinds of exposure (occasional, periodical and constant). The questionnaire data were based on measurements and analyses performed in 1997-2000. The results of the study showed that vibrating tools used by grinders, fitters, locksmiths, rammers, road workers, carpenters and smiths proved to be the most frequent sources of hand-transmitted vibration. It was revealed that 78.6% of operators of these tools were exposed to vibration exceeding 1 TLV. The study also indicated that 17,000 workers, including 1700 women, were exposed to vibration exceeding the threshold limit values.

Advanced Lighting Controls for Reducing Energy Use and Cost in DoD Installations

DTIC Science & Technology

2013-03-01

of advanced lighting control strategies including occupancy sensing, light tuning, daylight harvesting and proper lighting design is an effective way...details of this project and the results obtained. 15. SUBJECT TERMS Integrated lighting controls, occupancy sensing, daylight harvesting , personalized...provide energy savings through occupancy sensing, dimming and daylight harvesting . II. Dynalite is a distributed control-based, wired networked building

Estimation of the emission factors of particle number and mass fractions from traffic at a site where mean vehicle speeds vary over short distances

NASA Astrophysics Data System (ADS)

Jones, Alan M.; Harrison, Roy M.

Emission factors for particle number in three size ranges (11-30; 30-100 and >100 nm) as well as for PM 2.5, PM 2.5-10 and PM 10 mass have been estimated separately for heavy and light-duty vehicles in a heavily trafficked street canyon in London where traffic speeds vary considerably over short distances. Emissions of NO x were estimated from published emission factors, and emissions of other pollutants estimated from their ratio to NO x in the roadside concentration after subtraction of the simultaneously measured urban background. The estimated emission factors are compared with other published data. Despite many differences in the design and implementation of the various studies, the results for particulate matter are broadly similar. Estimates of particle number emissions in this study for light-duty vehicles are very close to other published data, whilst those for heavy-duty vehicles are lower than in the more comparable studies. It is suggested that a contributory factor may be the introduction of diesel particle oxidation traps on some of the bus fleet in London. Estimates of emission factors for particle mass (PM 2.5 and PM 2.5-10) are within the range of other published data, and total mass emissions estimated from the ratio of concentration to NO x are tolerably close to those estimated using emission factors from the National Atmospheric Emissions Inventory (NAEI). However, the method leads to an estimate of carbon monoxide emissions 3-6 times larger than that derived using the NAEI factors.

Occupational Education Today. New Directions for Community Colleges, Number 33.

ERIC Educational Resources Information Center

Arns, Kathleen F., Ed.

1981-01-01

This collection of essays examines issues that educators must address to maintain occupational education's prominent role in the future. Kathleen F. Arns considers the implications of uncertain enrollment patterns, changing delivery systems, an uneasy economic climate, government policies, and collaboration efforts. The history of occupational…

Occupational health in Brazil.

PubMed

Bedrikow, B; Algranti, E; Buschinelli, J T; Morrone, L C

1997-01-01

Brazil is a recently industrialised country with marked contrasts in social and economic development. The availability of public/private services in its different regions also varies. Health indicators follow these trends. Occupational health is a vast new field, as in other developing countries. Occupational medicine is a required subject in graduation courses for physicians. Specialisation courses for university graduated professionals have more than 700 hours of lectures and train occupational health physicians, safety engineers and nursing staff. At the technical level, there are courses with up to 1300 hours for the training of safety inspectors. Until 1986 about 19,000 occupational health physicians, 18,000 safety engineers and 51,000 safety inspectors had been officially registered. Although in its infancy, postgraduation has attracted professionals at university level, through residence programmes as well as masters and doctors degrees, whereby at least a hundred good-quality research studies have been produced so far. Occupational health activities are controlled by law. Undertakings with higher risks and larger number of employees are required to hire specialised technical staff. In 1995 the Ministry of Labour demanded programmes of medical control of occupational health (PCMSO) for every worker as well as a programme of prevention of environmental hazards (PPRA). This was considered as a positive measure for the improvement of working conditions and health at work. Physicians specialising in occupational medicine are the professionals more often hired by the enterprises. Reference centres (CRSTs) for workers' health are connected to the State or City Health Secretariat primary health care units. They exist in more populated areas and are accepted by workers as the best way to accomplish the diagnosis of occupational diseases. There is important participation by the trade unions in the management of these reference centres. For 30 years now employers

Energy Edge Post-Occupancy Evaluation Project: The Eugene Water and Electric Board Building (EWEB) Eugene, Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-06-01

The Workspace Satisfaction Survey measures occupant satisfaction with the thermal, lighting, acoustical, and air quality aspects of the work environment. In addition to ratings of these ambient environmental features, occupants also rate their satisfaction with a number of functional and aesthetic features of the office environment as well as their satisfaction with specific kinds of workspaces (e.g., computer rooms, the lobby, employee lounge, etc.) Each section on ambient conditions includes questions on the frequency with which people experience particular kinds of discomforts or problems, how much the discomfort bothers them, and how much it interferes with their work. Occupants aremore » also asked to identify how they cope with discomfort or environmental problems, and to what extent these behaviors enable them to achieve more satisfactory conditions. Results of this survey of occupants of the four story Eugene Water Electric Boards (EWEB) main office building on the banks of the Wilamette River in Eugene, Oregon are the subject of this report.« less

IDENTIFICATION OF OFF-FARM AGRICULTURAL OCCUPATIONS AND THE EDUCATION NEEDED FOR EMPLOYMENT IN THESE OCCUPATIONS IN DELAWARE.

ERIC Educational Resources Information Center

BARWICK, RALPH P.

THE PURPOSES OF THE STUDY WERE TO (1) IDENTIFY PRESENT AND EMERGING OFF-FARM AGRICULTURAL OCCUPATIONS, (2) ESTIMATE THE NUMBER EMPLOYED, (3) ESTIMATE THE NUMBER TO BE EMPLOYED IN THE FUTURE, AND (4) DETERMINE COMPETENCIES NEEDED IN SELECTED OCCUPATIONAL FAMILIES. A DISPROPORTIONATE RANDOM SAMPLE OF 267 BUSINESSES OR SERVICES WAS DRAWN FROM A LIST…

Viral hepatitis as an occupational disease in Poland.

PubMed

Bilski, Bartosz

2011-07-01

In medical terms, occupational diseases are defined as health disorders specifically associated with the working environment of people and their occupational activity. From the medical and legal perspectives, the vast majority of European countries consider particular diseases to be of occupational origin if they are mentioned in the current list of occupational diseases and caused by exposure to factors in the working environment that are harmful to health. The aim of this study was to analyze the occurrence of cases of viral hepatitis certified as an occupational disease in Poland during 1979-2009. This article presents the medical, economic, and legal aspects of the epidemiology of hepatitis as an occupational disease in Poland. Publically available statistical data on certified occupational diseases in Poland and data contained in individual "occupational disease diagnosis cards" (based on data used in Poland statistical form), regarding certified cases of hepatitis among health care professionals, which were collected by the Department of Occupational Hygiene of the Polish Public Health Service, were analyzed in this study. In Poland, the highest number of cases of hepatitis certified as an occupational disease was observed in 1987. A gradual reduction in the number of cases of hepatitis as an occupational disease has been noted since then. Currently, hepatitis C as an occupational disease is certified more frequently than hepatitis B. In Poland, the number of women with hepatitis certified as an occupational disease is higher than that of men. However, among health care professionals, particularly nurses, this difference is insignificant because women outnumber the men. The existence of such a situation is due to the significant quantitative predominance of women over men among medical personnel, especially among nurses. Immunization of health care professionals against the hepatitis B virus (HBV), introduced in Poland in 1988, was an important factor

Fatalities from occupational diseases in Connecticut.

PubMed

Morse, T; Storey, E

1999-08-01

Occupational diseases in Connecticut were identified using reports to the Workers' Compensation Commission, Connecticut OSHA, Vital Statistics, and the Tumor Registry. There were 93 identified fatalities from occupational disease in 1995, and 90 in 1994, approximately three times the number of traumatic occupational fatalities. Identified fatalities were predominantly from asbestos-related diseases, including mesothelioma and asbestosis. Most occupational diseases are not readily identifiable with current reporting mechanisms. Based on national estimates, these figures are considered to be an underestimate of the true burden of occupational disease. Increased awareness and reporting of occupational diseases is needed to properly identify and prevent these common conditions.

Real-Time Occupancy Change Analyzer

DOE Office of Scientific and Technical Information (OSTI.GOV)

2005-03-30

The Real-Time Occupancy Change Analyzer (ROCA) produces an occupancy grid map of an environment around the robot, scans the environment to generate a current obstacle map relative to a current robot position, and converts the current obstacle map to a current occupancy grid map. Changes in the occupancy grid can be reported in real time to support a number of tracking capabilities. The benefit of ROCA is that rather than only providing a vector to the detected change, it provides the actual x,y position of the change.

Principal Approaches to Understanding Occupation and Occupational Science Found in the Chilean Journal of Occupational Therapy (2001–2012)

PubMed Central

Gómez, Silvia; Tapia, María Jesús; Rueda, Laura

2017-01-01

Background The progression of occupational science in Chile is documented in the main scientific publication of the field, the Chilean Journal of Occupational Therapy (RChTO). Objective Identify approaches to understanding and applying occupation and occupational science as elucidated in the RChTO. Methodology A systematic qualitative review of the journal (2001–2012) identified articles elucidating an approach to understanding and application operationally defined as references to specific authors, theories, models/paradigms, definitions, and other fields that support approaches to O/OS. Results The study identified two main approaches. The first considers occupation/occupational science from a practical perspective or as a means to explain human behavior; the second considers occupation/occupational science as an object of study. Each approach is further divided into categories. Conclusion This study provides a novel perspective on regional use of occupational science concepts. These findings contribute to our understanding of this science in context and to recognition of the cultural relevance of these scientific concepts. PMID:29097971

Developing Occupational Programs. New Directions for Community Colleges, Number 58.

ERIC Educational Resources Information Center

Doty, Charles R., Ed.

1987-01-01

The essays in this collection attempt to provide a conceptual framework for the process of occupational curriculum development. The collection includes: (1) "Federal Government Involvement in Technical Curriculum Development," by John G. Nealon; (2) "The Challenge of Curriculum Development: From Idea to Reality," by Judith F. Raulf and Marilyn C.…

DIESEL ENGINE SYSTEMS. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 15.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO HELP TEACHERS PREPARE POSTSECONDARY STUDENTS FOR AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS, THIS GUIDE AIMS TO DEVELOP STUDENT UNDERSTANDING OF THE CONSTRUCTION AND OPERATING PRINCIPLES OF DIESEL ENGINES. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON…

[Current status of occupational health activities and the way that occupational health services should be offered to small- and medium-scale enterprises].

PubMed

Kayashima, Kotaro

2013-10-01

Activating occupational safety and health activities among Small- and Medium-scale Enterprises (SMEs) is a major issue because more than 80% of Japanese workers belong to these enterprises, in which the number of workers are less than 300 people. However, as the size of the enterprise decreases, the occurrence of problems of safety and health management systems and safety and health activities increases. Reasons for this include both the limitations of investments shortages of human resources. Occupational health services in SMEs has been provided by the cooperation of the following institutions: public associations (such as Regional Occupational Health Centers, Occupational Health Promotion Centers, Japan Industrial Safety and Health Association (JISHA)), occupational health agencies which provide checkup services, health insurance associations, and regional medical services. In contrast to the low coverage of occupational health services among SMEs in Japan, there are some countries in Europe in which this coverage is almost 100%. This is because of the development of occupational health services outside the company. To show the benefits of the safety and health activities to managers of SMEs, and to motivate them to take advantage of the services, it is important to consider measurements. Also, establishing systems that provide those services, improving the quality of specialists such as occupational physicians, and educating human resources, are all necessary.

Occupational, commuting, and leisure-time physical activity in relation to heart failure among finnish men and women.

PubMed

Wang, Yujie; Tuomilehto, Jaakko; Jousilahti, Pekka; Antikainen, Riitta; Mähönen, Markku; Katzmarzyk, Peter T; Hu, Gang

2010-09-28

The purpose of this study was to examine the association of different levels of occupational, commuting, and leisure-time physical activity and heart failure (HF) risk. The role of different types of physical activity in explaining the risk of HF is not properly established. Study cohorts included 28,334 Finnish men and 29,874 women who were 25 to 74 years of age and free of HF at baseline. Baseline measurement of different types of physical activity was used to predict incident HF. During a mean follow-up of 18.4 years, HF developed in 1,868 men and 1,640 women. The multivariate adjusted (age; smoking; education; alcohol consumption; body mass index; systolic blood pressure; total cholesterol; history of myocardial infarction, valvular heart disease, diabetes, lung disease, and use of antihypertensive drugs; and other types of physical activity) hazard ratios of HF associated with light, moderate, and active occupational activity were 1.00, 0.90, and 0.83 (p = 0.005, for trend) for men and 1.00, 0.80, and 0.92 (p = 0.007, for trend) for women, respectively. The multivariate adjusted hazard ratios of HF associated with low, moderate, and high leisure-time physical activity were 1.00, 0.83, and 0.65 (p < 0.001, for trend) for men and 1.00, 0.84, and 0.75 (p < 0.001, for trend) for women, respectively. Active commuting had a significant inverse association with HF risk in women, but not in men, before adjustment for occupational and leisure-time physical activity. The joint effects of any 2 types of physical activity on HF risk were even greater. Moderate and high levels of occupational or leisure-time physical activity are associated with a reduced risk of HF. Copyright © 2010 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

New Trends in Educational Lighting Systems.

ERIC Educational Resources Information Center

Murphy, Peter

2001-01-01

Explores technological trends for improving campus lighting, including the use of direct-indirect suspended fluorescent lighting, suspended linear lighting, high-efficiency optical systems, and occupancy and daylight sensors. (GR)

A bibliometric analysis of occupational therapy publications.

PubMed

Brown, Ted; Gutman, Sharon A; Ho, Yuh-Shan; Fong, Kenneth N K

2018-01-01

Bibliometrics involves the statistical analysis of the publications in a specific discipline or subject area. A bibliometric analysis of the occupational therapy refereed literature is needed. A bibliometric analysis was completed of the occupational therapy literature from 1991-2014, indexed in the Science Citation Index-Expanded or the Social Sciences Citation Index. Publications were searched by title, abstract, keywords, and KeyWords Plus. Total number of article citations, citations per journal, and contributions per country, individual authors, and institution were calculated. 5,315 occupational therapy articles were published in 821 journals. It appears that there is a citation window of an approximate 10-year period between the time of publication and the peak number of citations an article receives. The top three most highly cited articles were published in Developmental Medicine and Child Neurology, JAMA, and Lancet. AJOT, BJOT and AOTJ published the largest number of occupational therapy articles with the United States, Australia, and Canada producing the highest number of publications. McMaster University, the University of Queensland, and the University of Toronto were the institutions that published the largest number of occupational therapy journal articles. The occupational therapy literature is growing and the frequency of article citation is increasing.

Vehicle, driver and atmospheric factors in light-duty vehicle particle number emissions.

DOT National Transportation Integrated Search

2014-06-01

Made possible by the collection of on-board tailpipe emissions data, this research identifies road : and driver factors that are associated with a relatively understudied tailpipe pollutant from light-duty vehicles: ultrafine particle number emission...

Acute dim light at night increases body mass, alters metabolism, and shifts core body temperature circadian rhythms.

PubMed

Borniger, Jeremy C; Maurya, Santosh K; Periasamy, Muthu; Nelson, Randy J

2014-10-01

The circadian system is primarily entrained by the ambient light environment and is fundamentally linked to metabolism. Mounting evidence suggests a causal relationship among aberrant light exposure, shift work, and metabolic disease. Previous research has demonstrated deleterious metabolic phenotypes elicited by chronic (>4 weeks) exposure to dim light at night (DLAN) (∼ 5 lux). However, the metabolic effects of short-term (<2 weeks) exposure to DLAN are unspecified. We hypothesized that metabolic alterations would arise in response to just 2 weeks of DLAN. Specifically, we predicted that mice exposed to dim light would gain more body mass, alter whole body metabolism, and display altered body temperature (Tb) and activity rhythms compared to mice maintained in dark nights. Our data largely support these predictions; DLAN mice gained significantly more mass, reduced whole body energy expenditure, increased carbohydrate over fat oxidation, and altered temperature circadian rhythms. Importantly, these alterations occurred despite similar activity locomotor levels (and rhythms) and total food intake between groups. Peripheral clocks are potently entrained by body temperature rhythms, and the deregulation of body temperature we observed may contribute to metabolic problems due to "internal desynchrony" between the central circadian oscillator and temperature sensitive peripheral clocks. We conclude that even relatively short-term exposure to low levels of nighttime light can influence metabolism to increase mass gain.

Occupational Exposure to Ultraviolet Radiation and Risk of Non-Melanoma Skin Cancer in a Multinational European Study

PubMed Central

Surdu, Simona; Fitzgerald, Edward F.; Bloom, Michael S.; Boscoe, Francis P.; Carpenter, David O.; Haase, Richard F.; Gurzau, Eugen; Rudnai, Peter; Koppova, Kvetoslava; Févotte, Joëlle; Leonardi, Giovanni; Vahter, Marie; Goessler, Walter; Kumar, Rajiv; Fletcher, Tony

2013-01-01

Background Studies suggest that ambient sunlight plays an important role in the pathogenesis of non-melanoma skin cancers (NMSC). However, there is ongoing controversy regarding the relevance of occupational exposure to natural and artificial ultraviolet radiation (UV) radiation. Objectives We investigated potential associations between natural and artificial UV radiation exposure at work with NMSC in a case-control study conducted in Hungary, Romania, and Slovakia. Methods Occupational exposures were classified by expert assessment for 527 controls and 618 NMSC cases (515 basal cell carcinoma, BCC). Covariate information was collected via interview and multiple logistic regression models were used to assess associations between UV exposure and NMSC. Results Lifetime prevalence of occupational exposure in the participants was 13% for natural UV radiation and 7% for artificial UV radiation. Significant negative associations between occupational exposure to natural UV radiation and NMSC were detected for all who had ever been exposed (odds ratio (OR) 0.47, 95% confidence interval (CI) 0.27–0.80); similar results were detected using a semi-quantitative metric of cumulative exposure. The effects were modified by skin complexion, with significantly decreased risks of BCC among participants with light skin complexion. No associations were observed in relation to occupational artificial UV radiation exposure. Conclusions The protective effect of occupational exposure to natural UV radiation was unexpected, but limited to light-skinned people, suggesting adequate sun-protection behaviors. Further investigations focusing on variations in the individual genetic susceptibility and potential interactions with environmental and other relevant factors are planned. PMID:23638051

Investigation of occupational asthma: Do clinicians fail to identify relevant occupational exposures?

PubMed Central

de Olim, Carlo; Bégin, Denis; Boulet, Louis-Philippe; Cartier, André; Gérin, Michel; Lemière, Catherine

2015-01-01

BACKGROUND: Specific inhalation challenges (SIC) enable the identification of the agent responsible of occupational asthma (OA). A clinician may fail to identify a specific agent in the workplace, which may potentially lead to a misdiagnosis. The expert assessment method performed by an occupational hygienist has been used to evaluate occupational exposures in epidemiological studies. OBJECTIVE: The broad aim of the present study was to evaluate the contribution of an expert assessment performed by an occupational hygienist to the diagnosis of OA. The specific aim was to compare work-place exposures identified by an occupational hygienist and by chest physicians in subjects with positive SICs and subjects with asthma, but with a negative SIC. METHODS: SICs were performed in 120 cases: 67 were positive and 53 were negative. A clinician assessed occupational exposures to sensitizers during a routine clinical evaluation preceding the performance of the SIC. An expert assessment of occupational exposures was performed by an occupational hygienist blind to the result of the SIC. RESULTS: The occupational hygienist identified the causal agent in 96.7% of the 61 cases of positive SIC. In 33 (62.3%) cases of negative SICs, the occupational hygienist identified ≥1 sensitizing agent(s) that had not been identified by the clinician. CONCLUSION: The hygienist identified the causal agent in almost all subjects with OA. In contrast, the clinician failed to identify potential exposures to sensitizers in >60% of the negative SIC subjects, which may have resulted in some subjects being misdiagnosed as not having OA. PMID:26422401

Occupational exposure to asphalt mixture during road paving is related to increased mitochondria DNA copy number: a cross-sectional study.

PubMed

Xu, Yiyi; Lindh, Christian H; Jönsson, Bo A G; Broberg, Karin; Albin, Maria

2018-03-27

Asphalt workers are exposed to polyaromatic hydrocarbons (PAHs) from hot mix asphalt via both inhalation and dermal absorption. The use of crumb rubber modified (CRM) asphalt may result in higher exposure to PAHs and more adverse effects. Our aim is to assess occupational exposure to PAHs from conventional and CRM asphalt paving by measuring PAH metabolites in urine, and to investigate the effects on mitochondrial DNA copy number (mtDNAcn) and telomere length. We recruited 116 workers paving conventional asphalt, 51 workers paving CRM asphalt and 100 controls in Sweden, all males. A repeated-measures analysis included 31 workers paving both types of asphalt. Urine and blood samples were collected pre-working on Monday morning and post-working on Thursday afternoon after 4 days working. PAH metabolites: 1-hydroxypyrene (1-OH-PYR) and 2-hydroxyphenanthrene (2-OH-PH) were measured in urine by LC-MS/MS. Relative mtDNAcn and telomere length were measured by quantitative PCR. Conventional and CRM asphalt workers showed higher 1-OH-PYR and 2-OH-PH than controls (p < 0.001 for all). Relative mtDNAcn were 0.21 units (p < 0.001) higher in conventional asphalt workers and 0.13 units (p = 0.010) higher in CRM asphalt workers compared to controls. Relative telomere length did not differ across occupational groups, but it was positively associated with increment of 2-OH-PH (β = 0.075, p = 0.037) in asphalt workers. The repeated-measures analysis showed no difference in either increment of 1-OH-PYP, or changes in effect biomarkers (mtDNAcn or telomere length) between paving with conventional and CRM asphalt. Increment of 2-OH-PH was smaller after paving with CRM asphalt. Road asphalt paving in open areas resulted in PAHs exposure, as shown by elevation of PAH metabolites in urine. Asphalt workers may experience oxidative stress, evidenced by alternation in mtDNAcn; however the effects could not be fully explained by exposure to PAHs from the asphalt

Absence from work due to occupational and non-occupational accidents.

PubMed

Jørgensen, Kirsten; Laursen, Bjarne

2013-02-01

The aim of the present study was to investigate absence from work in Denmark due to occupational and non-occupational accidents. Since the beginning of the last decade, political focus has been placed on the population's working capacity and the scope of absence due to illness. Absence from work is estimated at between 3% and 6% of working hours in the EU and costs are estimated at approximately 2.5% of GNP. Victims of accidents treated at two emergency departments were interviewed regarding absence for the injured, the family and others. All answers were linked to the hospital information on the injury, so that it was possible to examine the relation between absence and injury type, and cause of the accident. In total, 1,479 injured persons were interviewed. 36% of these reported absence from work by themselves or others. In mean, an injury caused 3.21 days of absence. Based on this the total absence due to injuries in Denmark was estimated to 1,822,000 workdays, corresponding to approximately 6% of the total absence from work due to all types of illness. Non-occupational injuries resulted in more absence than did occupational injuries. Absence due to accidents contributed to a considerable part of the total absence from work, and non-occupational accidents caused more absence than did occupational accidents.

The Energy Employees Occupational Illness Compensation Program Act: new legislation to compensate affected employees.

PubMed

Silver, Ken

2005-06-01

Nurses make a bureaucracy work on behalf of clients. Occupational health nurses who are already versed in basic concepts applicable to EEOICPA--confidence intervals, occupational histories, exposure assessment, and dose response--can play constructive, caring roles in assisting claimants in securing benefits under this landmark program. Occupational health nurses know that chronically ill employees have a finite number of hours a week to make phone calls, visit providers, and advocate on their own behalf. Thoughtful referrals to occupational health providers who are both experienced and supportive can come from an occupational health nurse or a family physician. Involvement of university-based programs in projects to empower organizations representing EEOICP claimants would be a welcome development.

A Golden Ticket to Future Occupational and Environmental Health Monitoring

DTIC Science & Technology

2015-10-01

by the BE career field, an assessment of the regulatory monitoring requirements and current detection capabilities was critical . The next step in...research criteria due to the inability to predict the cost of production for these detection systems. Until a standardization of mass scale production...the health risk assessment process and is critical to keeping the base population safe from occupational and environmental exposures. The predominant

The ATLAS3D project - XX. Mass-size and mass-σ distributions of early-type galaxies: bulge fraction drives kinematics, mass-to-light ratio, molecular gas fraction and stellar initial mass function

NASA Astrophysics Data System (ADS)

Cappellari, Michele; McDermid, Richard M.; Alatalo, Katherine; Blitz, Leo; Bois, Maxime; Bournaud, Frédéric; Bureau, M.; Crocker, Alison F.; Davies, Roger L.; Davis, Timothy A.; de Zeeuw, P. T.; Duc, Pierre-Alain; Emsellem, Eric; Khochfar, Sadegh; Krajnović, Davor; Kuntschner, Harald; Morganti, Raffaella; Naab, Thorsten; Oosterloo, Tom; Sarzi, Marc; Scott, Nicholas; Serra, Paolo; Weijmans, Anne-Marie; Young, Lisa M.

2013-07-01

In the companion Paper XV of this series, we derive accurate total mass-to-light ratios (M/L)_JAM≈ (M/L)({r}= {R_e}) within a sphere of radius r= {R_e} centred on the galaxy, as well as stellar (M/L)stars (with the dark matter removed) for the volume-limited and nearly mass-selected (stellar mass M_star ≳ 6× 10^9 { M_{⊙}}) ATLAS3D sample of 260 early-type galaxies (ETGs, ellipticals Es and lenticulars S0s). Here, we use those parameters to study the two orthogonal projections ({M_JAM}, {σ _e}) and ({M_JAM}, {R_e^maj}) of the thin Mass Plane (MP) ({M_JAM}, {σ _e}, {R_e^maj}) which describes the distribution of the galaxy population, where {M_JAM}≡ L× (M/L)_JAM≈ M_star. The distribution of galaxy properties on both projections of the MP is characterized by: (i) the same zone of exclusion (ZOE), which can be transformed from one projection to the other using the scalar virial equation. The ZOE is roughly described by two power laws, joined by a break at a characteristic mass {M_JAM}≈ 3× 10^{10} { M_{⊙}}, which corresponds to the minimum Re and maximum stellar density. This results in a break in the mean {M_JAM}-{σ _e} relation with trends {M_JAM}∝ σ _e^{2.3} and {M_JAM}∝ σ _e^{4.7} at small and large σe, respectively; (ii) a characteristic mass {M_JAM}≈ 2× 10^{11} { M_{⊙}} which separates a population dominated by flat fast rotator with discs and spiral galaxies at lower masses, from one dominated by quite round slow rotators at larger masses; (iii) below that mass the distribution of ETGs' properties on the two projections of the MP tends to be constant along lines of roughly constant σe, or equivalently along lines with {R_e^maj}∝ {M_JAM}, respectively (or even better parallel to the ZOE: {R_e^maj}∝ M_JAM^{0.75}); (iv) it forms a continuous and parallel sequence with the distribution of spiral galaxies; (v) at even lower masses, the distribution of fast-rotator ETGs and late spirals naturally extends to that of dwarf ETGs (Sph

Relationships among particle number, surface area, and respirable mass concentrations in automotive engine manufacturing.

PubMed

Heitbrink, William A; Evans, Douglas E; Ku, Bon Ki; Maynard, Andrew D; Slavin, Thomas J; Peters, Thomas M

2009-01-01

This study investigated the relationships between particle number, surface area, and respirable mass concentration measured simultaneously in a foundry and an automotive engine machining and assembly center. Aerosol concentrations were measured throughout each plant with a condensation particle counter for number concentration, a diffusion charger for active surface area concentration, and an optical particle counter for respirable mass concentration. At selected locations, particle size distributions were characterized with the optical particle counter and an electrical low pressure impactor. Statistical analyses showed that active surface area concentration was correlated with ultrafine particle number concentration and weakly correlated with respirable mass concentration. Correlation between number and active surface area concentration was stronger during winter (R2 = 0.6 for both plants) than in the summer (R2 = 0.38 and 0.36 for the foundry and engine plant respectively). The stronger correlation in winter was attributed to use of direct-fire gas fired heaters that produced substantial numbers of ultrafine particles with a modal diameter between 0.007 and 0.023 mu m. These correlations support findings obtained through theoretical analysis. Such analysis predicts that active surface area increasingly underestimates geometric surface area with increasing particle size, particularly for particles larger than 100 nm. Thus, a stronger correlation between particle number concentration and active surface area concentration is expected in the presence of high concentrations of ultrafine particles. In general, active surface area concentration may be a concentration metric that is distinct from particle number concentration and respirable mass concentration. For future health effects or toxicological studies involving nano-materials or ultrafine aerosols, this finding needs to be considered, as exposure metrics may influence data interpretation.

Use of Occupancy Sensors in LED Parking Lot and Garage Applications: Early Experiences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kinzey, Bruce R.; Myer, Michael; Royer, Michael P.

2012-11-07

Occupancy sensor systems are gaining traction as an effective technological approach to reducing energy use in exterior commercial lighting applications. Done correctly, occupancy sensors can substantially enhance the savings from an already efficient lighting system. However, this technology is confronted by several potential challenges and pitfalls that can leave a significant amount of the prospective savings on the table. This report describes anecdotal experiences from field installations of occupancy sensor controlled light-emitting diode (LED) lighting at two parking structures and two parking lots. The relative levels of success at these installations reflect a marked range of potential outcomes: from anmore » additional 76% in energy savings to virtually no additional savings. Several issues that influenced savings were encountered in these early stage installations and are detailed in the report. Ultimately, care must be taken in the design, selection, and commissioning of a sensor-controlled lighting installation, else the only guaranteed result may be its cost.« less

Light-front holography and superconformal quantum mechanics: A new approach to hadron structure and color confinement

NASA Astrophysics Data System (ADS)

Brodsky, Stanley J.; Deur, Alexandre; de Téramond, Guy F.; Dosch, Hans Günter

2015-11-01

A primary question in hadron physics is how the mass scale for hadrons consisting of light quarks, such as the proton, emerges from the QCD Lagrangian even in the limit of zero quark mass. If one requires the effective action which underlies the QCD Lagrangian to remain conformally invariant and extends the formalism of de Alfaro, Fubini and Furlan to light-front Hamiltonian theory, then a unique, color-confining potential with a mass parameter κ emerges. The actual value of the parameter κ is not set by the model - only ratios of hadron masses and other hadronic mass scales are predicted. The result is a nonperturbative, relativistic light-front quantum mechanical wave equation, the Light-Front Schrödinger Equation which incorporates color confinement and other essential spectroscopic and dynamical features of hadron physics, including a massless pion for zero quark mass and linear Regge trajectories with the identical slope in the radial quantum number n and orbital angular momentum L. The same light-front equations for mesons with spin J also can be derived from the holographic mapping to QCD (3+1) at fixed light-front time from the soft-wall model modification of AdS5 space with a specific dilaton profile. Light-front holography thus provides a precise relation between the bound-state amplitudes in the fifth dimension of AdS space and the boost-invariant light-front wavefunctions describing the internal structure of hadrons in physical space-time. One can also extend the analysis to baryons using superconformal algebra - 2 × 2 supersymmetric representations of the conformal group. The resulting fermionic LF bound-state equations predict striking similarities between the meson and baryon spectra. In fact, the holographic QCD light-front Hamiltonians for the states on the meson and baryon trajectories are identical if one shifts the internal angular momenta of the meson (LM) and baryon (LB) by one unit: LM = LB + 1. We also show how the mass scale κ

EGY1 plays a role in regulation of endodermal plastid size and number that are involved in ethylene-dependent gravitropism of light-grown Arabidopsis hypocotyls.

PubMed

Guo, Di; Gao, Xiaorong; Li, Hao; Zhang, Tao; Chen, Gu; Huang, Pingbo; An, Lijia; Li, Ning

2008-03-01

Egy1 was isolated as an ethylene-dependent gravitropism-deficient Arabidopsis mutant. Molecular studies reveal that EGY1 gene encodes a 59-kDa plastid-targeted metalloprotease. It is actively expressed in hypocotyl tissue and targets to endodermal and cortex plastid. Its protein level is up-regulated by both ethylene and light. CAB protein accumulation and chlorophyll level is severely reduced in hypocotyls and endodermal cells, respectively. Sucrose is able to restore the severely reduced starch and lipid contents as well as the deficient endodermal plastid size found in light-grown egy1 hypocotyls yet it fails to rescue the reduced plastid number and chlorophyll level in egy1 endodermal cells. The loss-of-function egy1 mutation results in a smaller size (1.9 +/- 0.3 microm in diameter) and less number (5 +/- 1) of plastids in endodermal cells, which are nearly 50% of the wild-type. EGY1 is specially required for the development of full-size endodermal plastid in seedlings that are grown on sucrose-free media under light. It plays a direct role in controlling the light-induced chlorophyll production, grana formation and plastid replication in endodermal cell. However, it plays an indirect role in regulation of endodermal plastid size. It is likely that the ethylene-dependent gravitropism-deficient phenotype of egy1 hypocotyls may result from the smaller size and less number of endodermal plastids. Gravicurvature assays performed on ethylene-insensitive mutants, etr1-1, etr2-1, ers2-1, ein4-1 and ein2-5, have clearly demonstrated the necessary role for ethylene in vigorous gravitropism of light-grown hypocotyls. The degree of ethylene-dependent gravicurvature is positively correlated with the combined state of endodermal plastid mass and number. Neither ethylene nor EGY1-regulated full-size endodermal plastid is sufficient for promotion of vigorous hypocotyl gravitropism. Presence of 4 full-size plastids per endodermal cell together with ethylene pretreatment of

Effective public communication and marketing of high-occupancy-vehicle lanes : an agency perspective

DOT National Transportation Integrated Search

1997-01-01

The Massachusetts Highway Department (MassHighway) opened the Southeast Expressway high-occupancy-vehicle (HOV) lane on November 15, 1995. The 6-mi (9.6-km) contraflow lane, open to vehicles with at least three occupants, was MassHighways third at...

Occupational cancer in Britain

PubMed Central

Van Tongeren, Martie; Jimenez, Araceli S; Hutchings, Sally J; MacCalman, Laura; Rushton, Lesley; Cherrie, John W

2012-01-01

To estimate the current occupational cancer burden due to past exposures in Britain, estimates of the number of exposed workers at different levels are required, as well as risk estimates of cancer due to the exposures. This paper describes the methods and results for estimating the historical exposures. All occupational carcinogens or exposure circumstances classified by the International Agency for Research on Cancer as definite or probable human carcinogens and potentially to be found in British workplaces over the past 20–40 years were included in this study. Estimates of the number of people exposed by industrial sector were based predominantly on two sources of data, the CARcinogen EXposure (CAREX) database and the UK Labour Force Survey. Where possible, multiple and overlapping exposures were taken into account. Dose–response risk estimates were generally not available in the epidemiological literature for the cancer–exposure pairs in this study, and none of the sources available for obtaining the numbers exposed provided data by different levels of exposure. Industrial sectors were therefore assigned using expert judgement to ‘higher'- and ‘lower'-exposure groups based on the similarity of exposure to the population in the key epidemiological studies from which risk estimates had been selected. Estimates of historical exposure prevalence were obtained for 41 carcinogens or occupational circumstances. These include exposures to chemicals and metals, combustion products, other mixtures or groups of chemicals, mineral and biological dusts, physical agents and work patterns, as well as occupations and industries that have been associated with increased risk of cancer, but for which the causative agents are unknown. There were more than half a million workers exposed to each of six carcinogens (radon, solar radiation, crystalline silica, mineral oils, non-arsenical insecticides and 2,3,7,8-tetrachlorodibenzo-p-dioxin); other agents to which a large

Sexual orientation: its relevance to occupational science and the practice of occupational therapy.

PubMed

Jackson, J

1995-01-01

This article examines how sexual orientation may be relevant to the study of occupations and the practice of occupational therapy. It is suggested that a lesbian, gay, or bisexual orientation may influence the occupations in which a person engages, the symbolic interpretation of those occupations, and the environmental contingencies of those occupations, and thus is an appropriate topic for occupational scientists to address. With the use of clinical reasoning studies and literature on authentic occupational therapy, it is argued that a person's lesbian, gay, or bisexual orientation may be relevant to the therapeutic process if therapists are to truly achieve an intersubjective understanding of the patient's world and create an environment in which the patient is able to live a meaningful life. Given this argument as a foundation, the article explores why sexual orientation may be overlooked in some of the theoretical perspectives that guide practice. The narrative perspective on identity is introduced as one potentially valuable way that occupational therapy researchers and practitioners may understand sexual orientation and its relationship to occupation. Specifically it is suggested that sexual orientation may be understood, in part, as a symbolic theme of meaning that informs values and convictions that may then be expressed in one's choice of occupations.

The total workload of male and female white collar workers as related to age, occupational level, and number of children.

PubMed

Lundberg, U; Mårdberg, B; Frankenhaeuser, M

1994-12-01

A questionnaire assessing various aspects of paid as well as unpaid forms of productive activity was mailed to stratified samples of male and female white collar workers, approximately matched for educational and occupational level. Data from 501 men and 679 women employed full time revealed traditional gender differences in terms of main responsibility for household duties, child care etc. In keeping with this, women reported higher levels of work overload, stress and conflict than men, which increased significantly with the number of children at home. The various stress indices reached a peak between the ages of 35 and 39. Men reported more autonomy in their paid work whereas women reported more control at home. Men and women at the upper managerial levels reported more control over their total work situation and less conflict between demands.

Identity Strategies in Light of a Low-Prestige Occupation: The Case of Retail Apprentices

ERIC Educational Resources Information Center

Duemmler, Kerstin; Caprani, Isabelle

2017-01-01

Occupations differ in their prestige, but little research has examined how workers manage working in a low-prestige occupation. This case study with retail-clerk apprentices in Switzerland uncovers the identity strategies the apprentices employ to help them normalise the situation they find themselves in: they are learning an occupation that is…

Objectively Measured Total and Occupational Sedentary Time in Three Work Settings

PubMed Central

van Dommelen, Paula; Coffeng, Jennifer K.; van der Ploeg, Hidde P.; van der Beek, Allard J.; Boot, Cécile R. L.; Hendriksen, Ingrid J. M.

2016-01-01

Background Sedentary behaviour increases the risk for morbidity. Our primary aim is to determine the proportion and factors associated with objectively measured total and occupational sedentary time in three work settings. Secondary aim is to study the proportion of physical activity and prolonged sedentary bouts. Methods Data were obtained using ActiGraph accelerometers from employees of: 1) a financial service provider (n = 49 men, 31 women), 2) two research institutes (n = 30 men, 57 women), and 3) a construction company (n = 38 men). Total (over the whole day) and occupational sedentary time, physical activity and prolonged sedentary bouts (lasting ≥30 minutes) were calculated by work setting. Linear regression analyses were performed to examine general, health and work-related factors associated with sedentary time. Results The employees of the financial service provider and the research institutes spent 76–80% of their occupational time in sedentary behaviour, 18–20% in light intensity physical activity and 3–5% in moderate-to-vigorous intensity physical activity. Occupational time in prolonged sedentary bouts was 27–30%. Total time was less sedentary (64–70%), and had more light intensity physical activity (26–33%). The employees of the construction company spent 44% of their occupational time in sedentary behaviour, 49% in light, and 7% in moderate intensity physical activity, and spent 7% in sedentary bouts. Total time spent in sedentary behavior was 56%, 40% in light, and 4% in moderate intensity physical behaviour, and 12% in sedentary bouts. For women, low to intermediate education was the only factor that was negatively associated with occupational sedentary time. Conclusions Sedentary behaviour is high among white-collar employees, especially in highly educated women. A relatively small proportion of sedentary time was accrued in sedentary bouts. It is recommended that worksite health promotion efforts should focus on reducing sedentary

Characterization of Incidental Renal Mass With Dual-Energy CT: Diagnostic Accuracy of Effective Atomic Number Maps for Discriminating Nonenhancing Cysts From Enhancing Masses.

PubMed

Mileto, Achille; Allen, Brian C; Pietryga, Jason A; Farjat, Alfredo E; Zarzour, Jessica G; Bellini, Davide; Ebner, Lukas; Morgan, Desiree E

2017-10-01

The purpose of this study was to assess the diagnostic accuracy of effective atomic number maps reconstructed from dual-energy contrast-enhanced data for discriminating between nonenhancing renal cysts and enhancing masses. Two hundred six patients (128 men, 78 women; mean age, 64 years) underwent a CT renal mass protocol (single-energy unenhanced and dual-energy contrast-enhanced nephrographic imaging) at two different hospitals. For each set of patients, two blinded, independent observers performed measurements on effective atomic number maps from contrast-enhanced dual-energy data. Renal mass assessment on unenhanced and nephrographic images, corroborated by imaging and medical records, was the reference standard. The diagnostic accuracy of effective atomic number maps was assessed with ROC analysis. Significant differences in mean effective atomic numbers (Z eff ) were observed between nonenhancing and enhancing masses (set A, 8.19 vs 9.59 Z eff ; set B, 8.05 vs 9.19 Z eff ; sets combined, 8.13 vs 9.37 Z eff ) (p < 0.0001). An effective atomic number value of 8.36 Z eff was the optimal threshold, rendering an AUC of 0.92 (95% CI, 0.89-0.94), sensitivity of 90.8% (158/174 [95% CI, 85.5-94.7%]), specificity of 85.2% (445/522 [95% CI, 81.9-88.2%]), and overall diagnostic accuracy of 86.6% (603/696 [95% CI, 83.9-89.1%]). Nonenhancing renal cysts, including hyperattenuating cysts, can be discriminated from enhancing masses on effective atomic number maps generated from dual-energy contrast-enhanced CT data. This technique may be of clinical usefulness when a CT protocol for comprehensive assessment of renal masses is not available.

Occupation and thyroid cancer.

PubMed

Aschebrook-Kilfoy, Briseis; Ward, Mary H; Della Valle, Curt T; Friesen, Melissa C

2014-05-01

Numerous occupational and environmental exposures have been shown to disrupt thyroid hormones, but much less is known about their relationships with thyroid cancer. Here we review the epidemiology studies of occupations and occupational exposures and thyroid cancer incidence to provide insight into preventable risk factors for thyroid cancer. The published literature was searched using the Web of Knowledge database for all articles through August 2013 that had in their text 'occupation' 'job' 'employment' or 'work' and 'thyroid cancer'. After excluding 10 mortality studies and 4 studies with less than 5 exposed incident cases, we summarised the findings of 30 articles that examined thyroid cancer incidence in relation to occupations or occupational exposure. The studies were grouped by exposure/occupation category, study design and exposure assessment approach. Where available, gender-stratified results are reported. The most studied (19 of 30 studies) and the most consistent associations were observed for radiation-exposed workers and healthcare occupations. Suggestive, but inconsistent, associations were observed in studies of pesticide-exposed workers and agricultural occupations. Findings for other exposures and occupation groups were largely null. The majority of studies had few exposed cases and assessed exposure based on occupation or industry category, self-report, or generic (population-based) job exposure matrices. The suggestive, but inconsistent findings for many of the occupational exposures reviewed here indicate that more studies with larger numbers of cases and better exposure assessment are necessary, particularly for exposures known to disrupt thyroid homeostasis.

Perceived Indoor Environment and Occupants' Comfort in European "Modern" Office Buildings: The OFFICAIR Study.

PubMed

Sakellaris, Ioannis A; Saraga, Dikaia E; Mandin, Corinne; Roda, Célina; Fossati, Serena; de Kluizenaar, Yvonne; Carrer, Paolo; Dimitroulopoulou, Sani; Mihucz, Victor G; Szigeti, Tamás; Hänninen, Otto; de Oliveira Fernandes, Eduardo; Bartzis, John G; Bluyssen, Philomena M

2016-04-25

Indoor environmental conditions (thermal, noise, light, and indoor air quality) may affect workers' comfort, and consequently their health and well-being, as well as their productivity. This study aimed to assess the relations between perceived indoor environment and occupants' comfort, and to examine the modifying effects of both personal and building characteristics. Within the framework of the European project OFFICAIR, a questionnaire survey was administered to 7441 workers in 167 "modern" office buildings in eight European countries (Finland, France, Greece, Hungary, Italy, The Netherlands, Portugal, and Spain). Occupants assessed indoor environmental quality (IEQ) using both crude IEQ items (satisfaction with thermal comfort, noise, light, and indoor air quality), and detailed items related to indoor environmental parameters (e.g., too hot/cold temperature, humid/dry air, noise inside/outside, natural/artificial light, odor) of their office environment. Ordinal logistic regression analyses were performed to assess the relations between perceived IEQ and occupants' comfort. The highest association with occupants' overall comfort was found for "noise", followed by "air quality", "light" and "thermal" satisfaction. Analysis of detailed parameters revealed that "noise inside the buildings" was highly associated with occupants' overall comfort. "Layout of the offices" was the next parameter highly associated with overall comfort. The relations between IEQ and comfort differed by personal characteristics (gender, age, and the Effort Reward Imbalance index), and building characteristics (office type and building's location). Workplace design should take into account both occupant and the building characteristics in order to provide healthier and more comfortable conditions to their occupants.

The photovoltaic industry on the path to a sustainable future--environmental and occupational health issues.

PubMed

Bakhiyi, Bouchra; Labrèche, France; Zayed, Joseph

2014-12-01

As it supplies solar power, a priori considered harmless for the environment and human health compared with fossil fuels, the photovoltaic (PV) industry seems to contribute optimally to reduce greenhouse gas emissions and, overall, to sustainable development. However, considering the forecast for rapid growth, its use of potentially toxic substances and manufacturing processes presenting health and safety problems may jeopardize its benefits. This paper aims to establish a profile of the PV industry in order to determine current and emerging environmental and health concerns. A review of PV system life cycle assessments, in light of the current state of the industry and its developmental prospects, reveals information deficits concerning some sensitive life cycle indicators and environmental impacts, together with incomplete information on toxicological data and studies of workers' exposure to different chemical and physical hazards. Although solar panel installation is generally considered relatively safe, the occupational health concerns related to the growing number of hazardous materials handled in the PV industry warrants an all-inclusive occupational health and safety approach in order to achieve an optimal equilibrium with sustainability. To prevent eco-health problems from offsetting the benefits currently offered by the PV industry, manufacturers should cooperate actively with workers, researchers and government agencies toward improved and more transparent research, the adoption of specific and stricter regulations, the implementation of preventive risk management of occupational health and safety and, lastly, greater responsibilization toward PV systems from their design until their end of life. Copyright © 2014 Elsevier Ltd. All rights reserved.

The burden of occupationally-related cutaneous malignant melanoma in Britain due to solar radiation.

PubMed

Rushton, Lesley; J Hutchings, Sally

2017-02-14

Increasing evidence highlights the association of occupational exposure and cutaneous malignant melanoma (CMM). We estimated the burden of CMM and total skin cancer burden in Britain due to occupational solar radiation exposure. Attributable fractions (AF) and numbers were estimated for CMM mortality and incidence using risk estimates from the published literature and national data sources for proportions exposed. We extended existing methods to account for the exposed population age structure. The estimated total AF for CMM is 2.0% (95% CI: 1.4-2.7%), giving 48 (95% CI: 33-64) deaths in (2012) and 241 (95% CI: 168-325) registrations (in 2011) attributable to occupational exposure to solar radiation. Higher exposure and larger numbers exposed led to much higher numbers for men than women. Industries of concern are construction, agriculture, public administration and defence, and land transport. These results emphasise the urgent need to develop appropriate strategies to reduce this burden.

Occupational injuries in Italy.

PubMed

Baldasseroni, Alberto; Chellini, Elisabetta; Mantero, Silvia; Giovannetti, Lucia

2005-01-01

Data collected by the Italian Funds for Occupational Injuries and Diseases (INAIL) on incidence and mortality for occupational injuries in Italy during 1951-2001 are described with respect to the two main occupational sectors, Industry and Services, and Agriculture. Comparisons with other EU countries are included to place the current severe phenomenon in context. An ad hoc analysis aimed at verifying the completeness of the data on occupational fatal accidents collected by INAIL in Tuscany is reported: a linkage between the INAIL data and those registered by the Tuscan Regional Mortality Registry highlights that a number of working areas are not covered by INAIL, a problem whose solution would be useful for primary prevention.

Appraisal of levels and patterns of occupational exposure to 1,3-butadiene.

PubMed

Scarselli, Alberto; Corfiati, Marisa; Di Marzi, Davide; Iavicoli, Sergio

2017-09-01

Objectives 1,3-butadiene is classified as carcinogenic to human by inhalation and the association with leukemia has been observed in several epidemiological studies. The aim of this study was to evaluate data about occupational exposure levels to 1,3-butadiene in the Italian working force. Methods Airborne concentrations of 1,3-butadiene were extracted from the Italian database on occupational exposure to carcinogens in the period 1996-2015. Descriptive statistics were calculated for exposure-related variables. An analysis through linear mixed model was performed to determine factors influencing the exposure level. The probability of exceeding the exposure limit was predicted using a mixed-effects logistic model. Concurrent exposures with other occupational carcinogens were investigated using the two-step cluster analysis. Results The total number of exposure measurements selected was 23 885, with an overall arithmetic mean of 0.12 mg/m3. The economic sector with the highest number of measurements was manufacturing of chemicals (18 744). The most predictive variables of the exposure level resulted to be the occupational group and its interaction with the measurement year. The highest likelihood of exceeding the exposure limit was found in the manufacture of coke and refined petroleum products. Concurrent exposures were frequently detected, mainly with benzene, acrylonitrile and ethylene dichloride, and three main clusters were identified. Conclusions Exposure to 1,3-butadiene occurs in a wide variety of activity sectors and occupational groups. The use of several statistical analysis methods applied to occupational exposure databases can help to identify exposure situations at high risk for workers' health and better target preventive interventions and research projects.

Linking occupancy surveys with habitat characteristics to estimate abundance and distribution in an endangered cryptic bird

USGS Publications Warehouse

Crampton, Lisa H.; Brinck, Kevin W.; Pias, Kyle E.; Heindl, Barbara A. P.; Savre, Thomas; Diegmann, Julia S.; Paxton, Eben H.

2017-01-01

Accurate estimates of the distribution and abundance of endangered species are crucial to determine their status and plan recovery options, but such estimates are often difficult to obtain for species with low detection probabilities or that occur in inaccessible habitats. The Puaiohi (Myadestes palmeri) is a cryptic species endemic to Kauaʻi, Hawai‘i, and restricted to high elevation ravines that are largely inaccessible. To improve current population estimates, we developed an approach to model distribution and abundance of Puaiohi across their range by linking occupancy surveys to habitat characteristics, territory density, and landscape attributes. Occupancy per station ranged from 0.17 to 0.82, and was best predicted by the number and vertical extent of cliffs, cliff slope, stream width, and elevation. To link occupancy estimates with abundance, we used territory mapping data to estimate the average number of territories per survey station (0.44 and 0.66 territories per station in low and high occupancy streams, respectively), and the average number of individuals per territory (1.9). We then modeled Puaiohi occupancy as a function of two remote-sensed measures of habitat (stream sinuosity and elevation) to predict occupancy across its entire range. We combined predicted occupancy with estimates of birds per station to produce a global population estimate of 494 (95% CI 414–580) individuals. Our approach is a model for using multiple independent sources of information to accurately track population trends, and we discuss future directions for modeling abundance of this, and other, rare species.

Adapting Wireless Technology to Lighting Control and Environmental Sensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dana Teasdale; Francis Rubinstein; Dave Watson

The high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wirelessmore » mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multi-sensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 30% lower than a comparable wired

Cosmological baryon and lepton number in the presence of electroweak fermion-number violation

NASA Technical Reports Server (NTRS)

Harvey, Jeffrey A.; Turner, Michael S.

1990-01-01

In the presence of rapid fermion-number violation due to nonperturbative electroweak effects certain relations between the baryon number of the Universe and the lepton numbers of the Universe are predicted. In some cases the electron-neutrino asymmetry is exactly specified in terms of the baryon asymmetry. Without introducing new particles, beyond the usual quarks and leptons, it is necessary that the Universe possess a nonzero value of B - L prior to the epoch of fermion-number violation if baryon and lepton asymmetries are to survive. Contrary to intuition, even though electroweak processes violate B + L, a nonzero value of B + L persists after the epoch of rapid fermion-number violation. If the standard model is extended to include lepton-number violation, for example through Majorana neutrino masses, then electroweak processes will reduce the baryon number to zero even in the presence of an initial B - L unless 20 M(sub L) approximately greater than the square root of (T(sub B - L) m(sub P1)) where M(sub L) sets the scale of lepton number violation and T(sub B - L) is the temperature at which a B - L asymmetry is produced. In many models this implies that neutrinos must be so light that they cannot contribute appreciably to the mass density of the Universe.

Who wants to go to occupational therapy school? Characteristics of Norwegian occupational therapy students.

PubMed

Bonsaksen, Tore; Kvarsnes, Hildegunn; Dahl, Mona

2016-07-01

Research on occupational therapy students has often been concerned with quite narrow topics. However, the basic characteristics of this group are yet to be examined in more depth. This study aimed to explore the sociodemographic, education-related, and work-related characteristics of occupational therapy students. A sample of 160 occupational therapy students in Norway participated. Differences between cohorts of students were examined with one-way analyses of variance (ANOVA) for continuous variables and with chi-square tests for categorical variables. The sample had a mean age of 24 years and was predominantly female (79%). More than one -third of the students had one or both parents in an occupation requiring health education, whereas two-thirds of the students had one or both parents in an occupation requiring higher education. At entry, 57% of the participants had occupational therapy as their preferred choice of education and 43% had previous higher education experience. The few significant differences between the study cohorts were negligible. In the education programmes, specific attention may be considered for students with characteristics associated with increased risk of poorer study performance or other problems. This may concern male students and students with no previous higher education experience.

[Simple evaluation of numbers of asbestos bodies in bronchoalveolar lavage fluid under light microscopy: analysis of 35 pulmonary nodular lesions].

PubMed

Kawahara, Kunimitsu; Kawasumi, Hiromi; Nagano, Teruaki; Sasada, Shinji; Okamoto, Norio

2008-04-01

More than 1 asbestos body (AB) per ml of bronchoalveolar lavage fluid (BALF) under light microscopy was defined as AB positive (ABP) and suggests an occupational asbestos exposure. We microscopically evaluated the AB number per one ml of BALF, which we defined as the AB concentration (ABC), using bronchoalveolar lavage (BAL) cytocentrifuge slides obtained from 35 patients having pulmonary nodular lesions (20 carcinoma and 15 nonneoplastic disease) and examined the correlation between ABC and clinicopathological data including findings on Helical computed tomography scan (HCTS) and occupational history of asbestos exposure (OHAE). BAL was performed by the standard technique without removing mucous with a gauze filter. AB was microscopically defined as a structure consisting of a core of transparent asbestos surrounded by an iron-protein coat. Twenty of 35 patients were ABP (ABP rate; 57%) and ABC ranged from 0 to 207.98/ml (mean ABC; 11.33/ml). Mean ABC was significantly higher in patients with OHAE (15.04/ml) compared to that in patients without OHAE (3.23/ml). Twenty-two of 35 patients (63%) lacked abnormality on HCTS and among these, 12 patients (55%) were ABP. In 20 pulmonary carcinoma patients, the ABP rate was 85% and ABC ranged from 0 to 31.1/ml (Mean ABC; 2.99/ml). The ABP rate of pulmonary carcinoma patients was 40% (8 patients) and among these, 5 patients (63%) did not show any abnormality on HCTS. In conclusion, our method was simple and useful and should be applied to patients with pulmonary nodular lesions and OHAE, even if there are no abnormalities on HCTS.

Imaging Phenotype of Occupational Endotoxin-Related Lung Function Decline.

PubMed

Lai, Peggy S; Hang, Jing-Qing; Zhang, Feng-Ying; Sun, J; Zheng, Bu-Yong; Su, Li; Washko, George R; Christiani, David C

2016-09-01

Although occupational exposures contribute to a significant proportion of obstructive lung disease, the phenotype of obstructive lung disease associated with work-related organic dust exposure independent of smoking remains poorly defined. We identified the relative contributions of smoking and occupational endotoxin exposure to parenchymal and airway remodeling as defined by quantitative computed tomography (CT). The Shanghai Textile Worker Study is a longitudinal study of endotoxin-exposed cotton workers and endotoxin-unexposed silk workers that was initiated in 1981. Spirometry, occupational endotoxin exposure, and smoking habits were assessed at 5-year intervals. High-resolution computed tomography (CT) was performed in 464 retired workers in 2011, along with quantitative lung densitometric and airway analysis. Significant differences in all CT measures were noted across exposure groups. Occupational endotoxin exposure was associated with a decrease (-1.3%) in percent emphysema (LAAI-950), a 3.3-Hounsfield unit increase in 15th percentile density, an 18.1-g increase in lung mass, and a 2.3% increase in wall area percent. Current but not former smoking was associated with a similar CT phenotype. Changes in LAAI-950 were highly correlated with 15th percentile density (correlation -1.0). Lung mass was the only measure associated with forced expiratory volume in 1 sec (FEV1) decline, with each 10-g increase in lung mass associated with an additional loss (-6.1 mL) of FEV1 (p = 0.001) between 1981 and 2011. There are many similarities between the effects of occupational endotoxin exposure and those of tobacco smoke exposure on lung parenchyma and airway remodeling. The effects of occupational endotoxin exposure appear to persist even after the cessation of exposure. LAAI-950 may not be a reliable indicator of emphysema in subjects without spirometric impairment. Lung mass is a CT-based biomarker of accelerated lung function decline. Lai PS, Hang J, Zhang F, Sun J

Individual and occupational factors related to fatal occupational injuries: a case-control study.

PubMed

Villanueva, Vicent; Garcia, Ana M

2011-01-01

This study has been designed in order to identify factors increasing the risk of a fatal outcome when occupational accidents occur. The aim is to provide further evidence for the design and implementation of preventive measures in occupational settings. The Spanish Ministry of Labour registry of occupational injuries causing absence from work includes information on individual and occupational characteristics of injured workers and events. Registered fatal occupational injuries in 2001 (n=539) were compared to a sample of non-fatal injuries in the same year (n=3493). Risks for a fatal result of occupational injuries, adjusted by individual and occupational factors significantly associated, were obtained through logistic regression models. Compared to non-fatal injuries, fatal occupational injuries were mostly produced by trapping or by natural causes, mostly related to elevation and transport devices and power generators, and injured parts of body more frequently affected were head, multiple parts or internal organs. Adjusted analyses showed increased risk of fatality after an occupational injury for males (adjusted odds ratio aOR=10.92; 95%CI 4.80-24.84) and temporary workers (aOR=5.18; 95%CI 2.63-10.18), and the risk increased with age and with advancing hour of the work shift (p for trends <0.01). Injuries taking place out of the usual occupational setting (aOR=2.85, 95%CI 2.27-3.59), or carrying out atypical tasks (aOR=2.08; 95%CI 1.27-3.39) showed increased risks of a fatal result too, as occupational accidents in agricultural or construction companies. These data can help to select and define priorities for programmes aimed to prevent fatal consequences of occupational injuries. Copyright © 2010 Elsevier Ltd. All rights reserved.

Relation between number of component views and accuracy of left ventricular mass determined by three-dimensional echocardiography.

PubMed

Chuang, Michael L; Salton, Carol J; Hibberd, Mark G; Manning, Warren J; Douglas, Pamela S

2007-05-01

Three-dimensional echocardiography (3DE) allows the accurate determination of left ventricular (LV) mass, but the optimal number of component or extracted 2-dimensional (2D) image planes that should be used to calculate LV mass is not known. This study was performed to determine the relation between the number of 2D image planes used for 3DE and the accuracy of LV mass, using cardiovascular magnetic resonance (CMR) imaging as the reference standard. Three-dimensional echocardiography data sets were analyzed using 4, 6, 8, 10 and 20 component 2D planes as well as biplane 2D echocardiography and CMR in 25 subjects with a variety of LV pathologies. Repeated-measures analysis of variance and the Bland-Altman method were used to compare measures of LV mass. To further assess the potential clinical impact of reducing the number of component image planes used for 3DE, the number of discrepancies between CMR and each of the 3DE estimates of LV mass at prespecified levels (i.e., > or =5%, > or =10%, and > or =20% difference from CMR LV mass) was tabulated. The mean LV mass by magnetic resonance imaging was 177 +/- 56 g (range 91 to 316). Biplane 2-dimensional echocardiography significantly underestimated CMR LV mass (p <0.05), but LV mass by 3DE was not statistically different from that by CMR regardless of the number of planes used. However, error variability and Bland-Altman 95% confidence intervals decreased with the use of additional image planes. In conclusion, transthoracic 3DE measures LV mass more accurately than biplane 2-dimensional echocardiography when > or =6 component 2D image planes are used. The use of >6 planes further increases the accuracy of 3DE, but at the cost of greater analysis time and potentially increased scanning times.

Assessment of Bilateral Thoracic Loading on the Near-Side Occupant Due to Occupant-to-Occupant Interaction in Vehicle Crash Tests.

PubMed

Sunnevång, Cecilia; Pipkorn, Bengt; Boström, Ola

2015-01-01

This study aims, by means of the WorldSID 50th percentile male, to evaluate thoracic loading and injury risk to the near-side occupant due to occupant-to-occupant interaction in combination with loading from an intruding structure. Nine vehicle crash tests were performed with a 50th percentile WorldSID male dummy in the near-side (adjacent to the intruding structure) seat and a THOR or ES2 dummy in the far-side (opposite the intruding structure) seat. The near-side seated WorldSID was equipped with 6 + 6 IR-Traccs (LH and RH) in the thorax/abdomen enabling measurement of bilateral deflection. To differentiate deflection caused by the intrusion, and the deflection caused by the neighboring occupant, time history curves were analyzed. The crash tests were performed with different modern vehicles, equipped with thorax side airbags and inflatable curtains, ranging from a compact car to a large sedan, and in different loading conditions such as car-to-car, barrier, and pole tests. Lateral delta V based on vehicle tunnel acceleration and maximum residual intrusion at occupant position were used as a measurement of crash severity to compare injury measurements. In the 9 vehicle crash tests, thoracic loading, induced by the intruding structure as well as from the far-side occupant, varied due to the size and structural performance of the car as well as the severity of the crash. Peak deflection on the thoracic outboard side occurred during the first 50 ms of the event. Between 70 to 150 ms loading induced by the neighboring occupant occurred and resulted in an inboard-side peak deflection and viscous criterion. In the tests where the target vehicle lateral delta V was below 30 km/h and intrusion less than 200 mm, deflections were low on both the outboard (20-40 mm) and inboard side (10-15 mm). At higher crash severities, delta V 35 km/h and above as well as intrusions larger than 350 mm, the inboard deflections (caused by interaction to the far-side occupant) were of the

A technical framework to describe occupant behavior for building energy simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, William; Hong, Tianzhen

2013-12-20

Green buildings that fail to meet expected design performance criteria indicate that technology alone does not guarantee high performance. Human influences are quite often simplified and ignored in the design, construction, and operation of buildings. Energy-conscious human behavior has been demonstrated to be a significant positive factor for improving the indoor environment while reducing the energy use of buildings. In our study we developed a new technical framework to describe energy-related human behavior in buildings. The energy-related behavior includes accounting for individuals and groups of occupants and their interactions with building energy services systems, appliances and facilities. The technical frameworkmore » consists of four key components: i. the drivers behind energy-related occupant behavior, which are biological, societal, environmental, physical, and economical in nature ii. the needs of the occupants are based on satisfying criteria that are either physical (e.g. thermal, visual and acoustic comfort) or non-physical (e.g. entertainment, privacy, and social reward) iii. the actions that building occupants perform when their needs are not fulfilled iv. the systems with which an occupant can interact to satisfy their needs The technical framework aims to provide a standardized description of a complete set of human energy-related behaviors in the form of an XML schema. For each type of behavior (e.g., occupants opening/closing windows, switching on/off lights etc.) we identify a set of common behaviors based on a literature review, survey data, and our own field study and analysis. Stochastic models are adopted or developed for each type of behavior to enable the evaluation of the impact of human behavior on energy use in buildings, during either the design or operation phase. We will also demonstrate the use of the technical framework in assessing the impact of occupancy behavior on energy saving technologies. The technical framework

Direct Delta-MBPT(2) method for ionization potentials, electron affinities, and excitation energies using fractional occupation numbers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beste, Ariana; Vazquez-Mayagoitia, Alvaro; Ortiz, J. Vincent

2013-01-01

A direct method (D-Delta-MBPT(2)) to calculate second-order ionization potentials (IPs), electron affinities (EAs), and excitation energies is developed. The Delta-MBPT(2) method is defined as the correlated extension of the Delta-HF method. Energy differences are obtained by integrating the energy derivative with respect to occupation numbers over the appropriate parameter range. This is made possible by writing the second-order energy as a function of the occupation numbers. Relaxation effects are fully included at the SCF level. This is in contrast to linear response theory, which makes the D-Delta-MBPT(2) applicable not only to single excited but also higher excited states. We showmore » the relationship of the D-Delta-MBPT(2) method for IPs and EAs to a second-order approximation of the effective Fock-space coupled-cluster Hamiltonian and a second-order electron propagator method. We also discuss the connection between the D-Delta-MBPT(2) method for excitation energies and the CIS-MP2 method. Finally, as a proof of principle, we apply our method to calculate ionization potentials and excitation energies of some small molecules. For IPs, the Delta-MBPT(2) results compare well to the second-order solution of the Dyson equation. For excitation energies, the deviation from EOM-CCSD increases when correlation becomes more important. When using the numerical integration technique, we encounter difficulties that prevented us from reaching the Delta-MBPT(2) values. Most importantly, relaxation beyond the Hartree Fock level is significant and needs to be included in future research.« less

[Occupational risk according to occupational traumatism parameters in Russia].

PubMed

Tikhonova, G I; Churanova, A N; Gorchakova, T Iu

2012-01-01

The article covers analysis of occupational traumatism in Russia over 2009 in concern with economic activity types, with small enterprises accent. Based on method adapted to national information sources and assessing statistics reliability in countries with imperfect accounting, the authors demonstrated that with various hypotheses occupational accidents risk in Russian Federation is considerably higher than the registered one.

Coordinated Inservice Activities for Health Occupations Teachers in Central Pennsylvania. Final Report. Health Occupations, Monograph Number 6. Vocational-Industrial Education Research Report. Volume 15, Number 16.

ERIC Educational Resources Information Center

Hole, F. Marvin

This report contains a twenty-one page narrative of a project which provided inservice education to health occupations teachers in Central Pennsylvania through four summer workshops as well as the workshop materials. The narrative describes the workshops, which focused on dental assisting activities for health assistant teachers, improvement of…

Occupational syncarcinogenesis in the skin - combined effects of two carcinogens from the German occupational disease list.

PubMed

Dickel, Heinrich; Blome, Otto; Dickel, Beate; Bruckner, Thomas; Stockfleth, Eggert; Soemantri, Silas Paras

2016-12-01

Though scientifically undisputed, cutaneous syncarcinogenesis is not reflected in German occupational disease (OD) regulations, which tend to be guided by the tenet of monocausality. Recognition of nonmelanoma skin cancer (NMSC) and its precursor lesions as OD requires individual assessment as to whether the requirements pursuant to either OD 5103 (occupational exposure to natural UV radiation) or OD 5102 (occupational exposure to polycyclic aromatic hydrocarbons) are fulfilled. Retrospective analysis of 28 patients (median age 72.5 years) with NMSC and respective precursor lesions who had been occupationally exposed to natural UV radiation and polycyclic aromatic hydrocarbons. All cases had undergone expert medical assessment between September 2012 and September 2015. According to our assessments, all 28 cases met the occupational requirements pursuant to OD 5103 and 5102. In 26 cases (93 %), we recommended recognition of skin cancer as occupational disease pursuant to both OD 5103 and OD 5102. The competent occupational insurance association (BG) followed our recommendation in four cases. In eight cases, recognition was solely based on OD 5103; in ten cases, only on OD 5102. Four cases were denied recognition. Following adequate cumulative occupational exposure to natural UV light as well as occupational exposure to polycyclic aromatic hydrocarbons, NMSC or its precursor lesions arising in UV-exposed areas should be reported to the competent occupational insurance association as "OD 5103 and 5102 in terms of syncarcinogenesis". Apart from the fact that the ensuing recognition proceedings will be able to more adequately reflect real-life workplace conditions, filing a report pursuant to both ODs also allows for recognition of basal cell carcinoma as occupational disease. According to current regulations, this would not be possible, if the assessment were solely based on OD 5103. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons

Observation of fast sound in disparate-mass gas mixtures by light scattering

NASA Astrophysics Data System (ADS)

Wegdam, G. H.; Bot, Arjen; Schram, R. P. C.; Schaink, H. M.

1989-12-01

We performed light-scattering experiments on a mixture of hydrogen and argon. By varying the density of the sample, we can probe the range of reduced wave vectors in which Campa and Cohen [Phys. Rev. A 39, 4909 (1989)] predicted, in dilute disparate-mass gas mixtures, the onset of a mode supported by the light particles: the fast sound mode. The presence of the additional sound mode can be established most conveniently by analyzing ω2I(k,ω) rather than I(k,ω). Our results for the shift of fast and slow sound match the theoretical predictions very well.

[Occupational exposure to carcinogens: analysis of the application of the CAREX information system to Catalonia].

PubMed

de Grado Andrés, Adolfo; Molinero Ruiz, Emilia; van der Haar, Rudolf

2014-01-01

The objective of this study is to estimate occupational exposures to human carcinogens in Catalonia in 2009, taking as a reference the CAREX ESP 2007 information system, and to evaluate the suitability of extrapolating these data to Catalonia. The reference population is the number of people registered with the Social Security system in Catalonia in 2009. Carcinogens considered are those which the International Agency for Research on Cancer (IARC) classified into groups 1 and 2A and are related to occupational exposures. The exposure prevalences from the CAREX ESP 2007, adapted to the Catalonian Industrial Classification (CCAE 09), were used. Technical survey reports from the Occupational Safety and Health Centers of the Catalonian local government, and related databases were consulted. The most frequent occupational exposures to human carcinogens were solar radiation, crystalline silica, diesel exhaust, radon and wood dust, although based mainly on data not considered adequate for extrapolation to Catalonia. Around 217 exposure situations for 25 carcinogens, not previously considered in CAREX ESP 2007, were identified. The estimated number of workers exposed to human carcinogens in Catalonia in 2009 based on the CAREX ESP 2007 system could differ from the real situation. Development of a CAREX CAT system that incorporates exposure data from Catalonia is recommended. Copyright belongs to the Societat Catalana de Seguretat i Medicina del Treball.

Light-front holographic distribution amplitudes of pseudoscalar mesons and their application to B -meson decays

DOE PAGES

Chang, Qin; Brodsky, Stanley J.; Li, Xin-Qiang

2017-05-30

In this article the dynamical spin effects of the light-front holographic wave functions for light pseudoscalar mesons are studied. These improved wave functions are then confronted with a number of hadronic observables: the decay constants of π and K mesons, their ξ -moments, the pion-to-photon transition form factor, and the pure annihilationmore » $$\\bar{B}_s$$ → π + π - and $$\\bar{B}_d$$ → K + K - decays. Taking f π , fK , and their ratio fK / f π as constraints, we perform a χ 2 analysis for the holographic parameters, including the mass scale parameter $$\\sqrtλ$$ and the effective quark masses, and find that the fitted results are quite consistent with the ones obtained from the light-quark hadronic Regge trajectories. In addition, we also show that the end point divergence appearing in the pure annihilation $$\\bar{B}_s$$ → π + π - and $$\\bar{B}_d$$ → K + K - decays can be controlled well by using these improved light-front holographic distribution amplitudes.« less

Occupational Roles in Children's Literature

ERIC Educational Resources Information Center

Hillman, Judith Stevinson

1976-01-01

Compares children's literature of the 1930s and that of recent times in terms of occupational roles and sex typing. Little change was found in number or type of women's occupations despite the recent political, social and economic changes. (MS)

Adapting Wireless Technology to Lighting Control and Environmental Sensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dana Teasdale; Francis Rubinstein; David S. Watson

Although advanced lighting control systems offer significant energy savings, the high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor,more » and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output, in addition to 0-24 Volt and 0-10 Volt inputs. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multisensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including open and closed-loop daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that

Reconstructing the stellar mass distributions of galaxies using S{sup 4}G IRAC 3.6 and 4.5 μm images. II. The conversion from light to mass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meidt, Sharon E.; Schinnerer, Eva; Van de Ven, Glenn

2014-06-20

We present a new approach for estimating the 3.6 μm stellar mass-to-light (M/L) ratio Y{sub 3.6} in terms of the [3.6]-[4.5] colors of old stellar populations. Our approach avoids several of the largest sources of uncertainty in existing techniques using population synthesis models. By focusing on mid-IR wavelengths, we gain a virtually dust extinction-free tracer of the old stars, avoiding the need to adopt a dust model to correctly interpret optical or optical/near-IR colors normally leveraged to assign the mass-to-light ratio Y. By calibrating a new relation between near-IR and mid-IR colors of giant stars observed in GLIMPSE we alsomore » avoid the discrepancies in model predictions for the [3.6]-[4.5] colors of old stellar populations due to uncertainties in the molecular line opacities assumed in template spectra. We find that the [3.6]-[4.5] color, which is driven primarily by metallicity, provides a tight constraint on Y{sub 3.6}, which varies intrinsically less than at optical wavelengths. The uncertainty on Y{sub 3.6} of ∼0.07 dex due to unconstrained age variations marks a significant improvement on existing techniques for estimating the stellar M/L with shorter wavelength data. A single Y{sub 3.6} = 0.6 (assuming a Chabrier initial mass function (IMF)), independent of [3.6]-[4.5] color, is also feasible because it can be applied simultaneously to old, metal-rich and young, metal-poor populations, and still with comparable (or better) accuracy (∼0.1 dex) than alternatives. We expect our Y{sub 3.6} to be optimal for mapping the stellar mass distributions in S{sup 4}G galaxies, for which we have developed an independent component analysis technique to first isolate the old stellar light at 3.6 μm from nonstellar emission (e.g., hot dust and the 3.3 polycyclic aromatic hydrocarbon feature). Our estimate can also be used to determine the fractional contribution of nonstellar emission to global (rest-frame) 3.6 μm fluxes, e.g., in WISE imaging, and

Effect of Reynolds number on flow and mass transfer characteristics of a 90 degree elbow

NASA Astrophysics Data System (ADS)

Fujisawa, Nobuyuki; Ikarashi, Yuya; Yamagata, Takayuki; Taguchi, Syoichi

2016-11-01

The flow and mass transfer characteristics of a 90 degree elbow was studied experimentally by using the mass transfer measurement by plaster dissolution method, the surface flow visualization by oil film method and stereo PIV measurement. The experiments are carried out in a water tunnel of a circular pipe of 56mm in diameter with a working fluid of water. The Reynolds number was varied from 30000 to 200000. The experimental result indicated the change of the mass transfer coefficient distribution in the elbow with increasing the Reynolds number. This phenomenon is further examined by the surface flow visualization and measurement of secondary flow pattern in the elbow, and the results showed the suggested change of the secondary flow pattern in the elbow with increasing the Reynolds numbers.

MECHANICAL POWER TRANSFER SYSTEMS. AGRICULTURAL MACHINERY-SERVICE OCCUPATIONS, MODULE NUMBER 8.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO HELP TEACHERS PREPARE POSTSECONDARY-LEVEL STUDENTS FOR THE AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS, THIS GUIDE AIMS TO DEVELOP STUDENT COMPETENCY IN UNDERSTANDING AND APPLYING THE PRINCIPLES OF MECHANICAL POWER TRANSMISSION IN AGRICULTURAL…

[Occupational exposure of welders to ultraviolet and "blue light" radiation emitted during TIG and MMA welding based on field measurements].

PubMed

Wolska, Agnieszka

2013-01-01

The aim of the study was to present the results of welders' occupational exposure to "blue light" and UV radiation carried out at industrial workstations during TIG and MMA welding. Measurements were performed at 13 workstations (TIG welding: 6; MMA welding: 7), at which different welding parameters and materials were used. The radiation level was measured using a wide-range radiometer and a set of detectors, whose spectral responses were adequately fit to particular hazard under study. The measurement points corresponded with the location of eye and hand. The highest values of eye irradiance were found for aluminum TIG welding. Effective irradiance of actinic UV was within the range E(s) = 7.79-37.6 W/m2; UVA total irradiance, E(UVA) = 18-53.1 W/m2 and effective blue-light irradiance E(B) = 35-67 W/m2. The maximum allowance time ranged from 1.7 to 75 s, which means that in some cases even unintentional very short eye exposure can exceed MPE. The influence of welded material and the type of electrode coating on the measured radiation level were evidenced. The exceeded value of MPE for photochemical hazard arising for the eyes and skin was found at all measured workstations. Welders should use appropriately the eye and face protective equipment and avoid direct staring at welding arc when starting an arc-welding operation. Besides, the lack of head and neck skin protection can induce acute and chronic harmful health effects. Therefore, an appropriate wear of personal protective equipment is essential for welders' health.

Two-loop matching factors for light quark masses and three-loop mass anomalous dimensions in the regularization invariant symmetric momentum-subtraction schemes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Almeida, Leandro G.; Physics Department, Brookhaven National Laboratory, Upton, New York 11973; Sturm, Christian

2010-09-01

Light quark masses can be determined through lattice simulations in regularization invariant momentum-subtraction (RI/MOM) schemes. Subsequently, matching factors, computed in continuum perturbation theory, are used in order to convert these quark masses from a RI/MOM scheme to the MS scheme. We calculate the two-loop corrections in QCD to these matching factors as well as the three-loop mass anomalous dimensions for the RI/SMOM and RI/SMOM{sub {gamma}{sub {mu}} }schemes. These two schemes are characterized by a symmetric subtraction point. Providing the conversion factors in the two different schemes allows for a better understanding of the systematic uncertainties. The two-loop expansion coefficients ofmore » the matching factors for both schemes turn out to be small compared to the traditional RI/MOM schemes. For n{sub f}=3 quark flavors they are about 0.6%-0.7% and 2%, respectively, of the leading order result at scales of about 2 GeV. Therefore, they will allow for a significant reduction of the systematic uncertainty of light quark mass determinations obtained through this approach. The determination of these matching factors requires the computation of amputated Green's functions with the insertions of quark bilinear operators. As a by-product of our calculation we also provide the corresponding results for the tensor operator.« less

Transitioning From Occupational Therapy Student To Practicing Occupational Therapist: First Year of Employment.

PubMed

McCombie, Randy P; Antanavage, Meredith E

2017-04-01

This research examined the transition from occupational therapy student to practicing occupational therapist over the course of one's first year of professional employment, as recalled by a sample of occupational therapists. Surveys were mailed to 500 occupational therapists randomly selected from membership in the American Occupational Therapy Association resulting in 202 returned surveys. Median year of graduation was 1998, ranging from 1967 to 2014. In general, respondents indicated the transition was positive. Having a mentor was related to high job satisfaction and good clinical fit, while supervising an occupational therapy assistant and low self-confidence were viewed as negative impact factors. Recent graduates presented with lower ratings of a positive transition and higher ratings of likelihood of experiencing burnout and initial job stress than earlier graduates. Recommendations for improving the transition experience are presented.

Transformation from student to occupational therapist: Using the Delphi technique to identify the threshold concepts of occupational therapy.

PubMed

Nicola-Richmond, Kelli M; Pépin, Geneviève; Larkin, Helen

2016-04-01

Understanding and facilitating the transformation from occupational therapy student to practitioner is central to the development of competent and work-ready graduates. However, the pivotal concepts and capabilities that need to be taught and learnt in occupational therapy are not necessarily explicit. The threshold concepts theory of teaching and learning proposes that every discipline has a set of transformational concepts that students must acquire in order to progress. As students acquire the threshold concepts, they develop a transformed way of understanding content related to their course of study which contributes to their developing expertise. The aim of this study was to identify the threshold concepts of occupational therapy. The Delphi technique, a data collection method that aims to demonstrate consensus in relation to important questions, was used with three groups comprising final year occupational therapy students (n = 11), occupational therapy clinicians (n = 21) and academics teaching occupational therapy (n = 10) in Victoria, Australia. Participants reached consensus regarding 10 threshold concepts for the occupational therapy discipline. These are: understanding and applying the models and theories of occupational therapy; occupation; evidence-based practice; clinical reasoning; discipline specific skills and knowledge; practising in context; a client-centred approach; the occupational therapist role; reflective practice and; a holistic approach. The threshold concepts identified provide valuable information for the discipline. They can potentially inform the development of competencies for occupational therapy and provide guidance for teaching and learning activities to facilitate the transformation to competent practitioner. © 2015 Occupational Therapy Australia.

HYDRAULIC POWER TRANSFER SYSTEMS. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 9.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO HELP TEACHERS PREPARE POSTSECONDARY-LEVEL STUDENTS FOR THE AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS, THIS GUIDE AIMS TO DEVELOP STUDENT COMPETENCY IN UNDERSTANDING BASIC HYDRAULICS AND ITS APPLICATION TO AGRICULTURAL MACHINERY. IT WAS DEVELOPED BY A…

Occupation and Thyroid Cancer

PubMed Central

Aschebrook-Kilfoy, Briseis; Ward, Mary H.; Valle, Curt T. Della; Friesen, Melissa C.

2014-01-01

Objectives Numerous occupational and environmental exposures have been shown to disrupt thyroid hormones, but much less is known about their relationships with thyroid cancer. Here we review the epidemiology studies of occupations and occupational exposures and thyroid cancer incidence to provide insight into preventable risk factors for thyroid cancer. Methods The published literature was searched using the Web of Knowledge database for all articles through August 2013 that had in their text “occupation” “job” ”employment” or “work” and “thyroid cancer”. After excluding 10 mortality studies and 4 studies with less than 5 exposed incident cases, we summarized the findings of 30 articles that examined thyroid cancer incidence in relation to occupations or occupational exposure. The studies were grouped by exposure/occupation category, study design, and exposure assessment approach. Where available, gender stratified results are reported. Results The most studied (19 of 30 studies) and the most consistent associations were observed for radiation-exposed workers and health care occupations. Suggestive, but inconsistent, associations were observed in studies of pesticide-exposed workers and agricultural occupations. Findings for other exposures and occupation groups were largely null. The majority of studies had few exposed cases and assessed exposure based on occupation or industry category, self-report, or generic (population-based) job exposure matrices. Conclusion The suggestive, but inconsistent findings for many of the occupational exposures reviewed here indicate that more studies with larger numbers of cases and better exposure assessment are necessary, particularly for exposures known to disrupt thyroid homeostasis. PMID:24604144

Occupation and mammographic density: A population-based study (DDM-Occup).

PubMed

García-Pérez, Javier; Pollán, Marina; Pérez-Gómez, Beatriz; González-Sánchez, Mario; Cortés Barragán, Rosa Ana; Maqueda Blasco, Jerónimo; González-Galarzo, María Carmen; Alba, Miguel Ángel; van der Haar, Rudolf; Casas, Silvia; Vicente, Cándida; Medina, Pilar; Ederra, María; Santamariña, Carmen; Moreno, María Pilar; Casanova, Francisco; Pedraz-Pingarrón, Carmen; Moreo, Pilar; Ascunce, Nieves; García, Montse; Salas-Trejo, Dolores; Sánchez-Contador, Carmen; Llobet, Rafael; Lope, Virginia

2017-11-01

High mammographic density is one of the main risk factors for breast cancer. Although several occupations have been associated with breast cancer, there are no previous occupational studies exploring the association with mammographic density. Our objective was to identify occupations associated with high mammographic density in Spanish female workers. We conducted a population-based cross-sectional study of occupational determinants of high mammographic density in Spain, based on 1476 women, aged 45-68 years, recruited from seven screening centers within the Spanish Breast Cancer Screening Program network. Reproductive, family, personal, and occupational history data were collected. The latest occupation of each woman was collected and coded according to the 1994 National Classification of Occupations. Mammographic density was assessed from the cranio-caudal mammogram of the left breast using a semi-automated computer-assisted tool. Association between mammographic density and occupation was evaluated by using mixed linear regression models, using log-transformed percentage of mammographic density as dependent variable. Models were adjusted for age, body mass index, menopausal status, parity, smoking, alcohol intake, educational level, type of mammography, first-degree relative with breast cancer, and hormonal replacement therapy use. Screening center and professional reader were included as random effects terms. Mammographic density was higher, although non-statistically significant, among secondary school teachers (e β = 1.41; 95%CI = 0.98-2.03) and nurses (e β = 1.23; 95%CI = 0.96-1.59), whereas workers engaged in the care of people (e β = 0.81; 95%CI = 0.66-1.00) and housewives (e β = 0.87; 95%CI = 0.79-0.95) showed an inverse association with mammographic density. A positive trend for every 5 years working as secondary school teachers was also detected (p-value = 0.035). Nurses and secondary school teachers were the occupations with the highest

Sperm competition games: sperm size (mass) and number under raffle and displacement, and the evolution of P2.

PubMed

Parker, G A; Immler, S; Pitnick, S; Birkhead, T R

2010-06-07

We examine models for evolution of sperm size (i.e. mass m) and number (s) under three mechanisms of sperm competition at low 'risk' levels: (i) raffle with no constraint on space available for competing sperm, (ii) direct displacement mainly by seminal fluid, and (iii) direct displacement mainly by sperm mass. Increasing sperm mass increases a sperm's 'competitive weight' against rival sperm through a diminishing returns function, r(m). ESS total ejaculate expenditure (the product m(*)s(*)) increases in all three models with sperm competition risk, q. If r(m), or ratio r'(m)/r(m), is independent of ESS sperm numbers, ESS sperm mass remains constant, and the sperm mass/number ratio (m(*)/s(*)) therefore decreases with risk. Dependency of sperm mass on risk can arise if r(m) depends on competing sperm density (sperm number / space available for sperm competition). Such dependencies generate complex relationships between sperm mass and number with risk, depending both on the mechanism and how sperm density affects r(m). While numbers always increase with risk, mass can either increase or decrease, but m(*)/s(*) typically decreases with risk unless sperm density strongly influences r(m). Where there is no extrinsic loading due to mating order, ESS paternity of the second (i.e. last) male to mate (P(2)) under displacement always exceeds 0.5, and increases with risk (in the raffle P(2)=0.5). Caution is needed when seeking evidence for a sperm size-number trade off. Although size and number trade-off independently against effort spent on acquiring matings, their product, m(*)s(*), is invariant or fixed at a given risk level, effectively generating a size-number trade off. However, unless controlled for the effects of risk, the relation between m(*) and s(*) can be either positive or negative (a positive relation is usually taken as evidence against a size-number trade off). Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Disorders Induced by Direct Occupational Exposure to Noise: Systematic Review

PubMed Central

Domingo-Pueyo, Andrea; Sanz-Valero, Javier; Wanden-Berghe, Carmina

2016-01-01

Background: To review the available scientific literature about the effects on health by occupational exposure to noise. Materials and Methods: A systematic review of the retrieved scientific literature from the databases MEDLINE (via PubMed), ISI-Web of Knowledge (Institute for Scientific Information), Cochrane Library Plus, SCOPUS, and SciELO (collection of scientific journals) was conducted. The following terms were used as descriptors and were searched in free text: “Noise, Occupational,” “Occupational Exposure,” and “Occupational Disease.” The following limits were considered: “Humans,” “Adult (more than 18 years),” and “Comparative Studies.” Results: A total of 281 references were retrieved, and after applying inclusion/exclusion criteria, 25 articles were selected. Of these selected articles, 19 studies provided information about hearing disturbance, four on cardiovascular disorders, one regarding respiratory alteration, and one on other disorders. Conclusions: It can be interpreted that the exposure to noise causes alterations in humans with different relevant outcomes, and therefore appropriate security measures in the work environment must be employed to minimize such an exposure and thereby to reduce the number of associated disorders. PMID:27762251

Light, rest mass and electric charge quanta all formed by neutrinos?

NASA Astrophysics Data System (ADS)

Chen, Shao-Guang

In high energy physics experiments the electric charge and rest mass of particles can commonly transform into the photons, vice versa. Its reason QFT can only give a vague answer: based on the particle creation and annihilation operators. There are not more clear answers or conjecture? At least, light, electric charge and rest mass should have a collective structure component, if not, the transformation is unable understanding. An elementary answer is that neutrino and antineutrino as their collective structure component. In the paper ‘Chen Qiliang & Wang Bin, The formation and characteristics of Chen Shaoguang's formula, China Science &Technology Overview 127101-103 (2011)’, the lowest energy state vertical polarized left spin 1/2 neutrino and right spin 1/2 antineutrino are just the left, right advance unit quanta la _{0}nuυ, ra nuυ _{0} and left, right back unit quanta lb (0) nuυ, rb nuυ (0) , it again compose into spin 1 unit photon la-ra _{0}nuυnuυ _{0} and back-photon lb-rb (0) nuυnuυ (0) , spin 0 unit rest mass ra-rb nuυ _{0}nuυ (0) and anti-mass la-lb _{0}nuυ (0) nuυ, spin 0 unit positive charge la-rb _{0}nuυnuυ (0) and negative charge ra-lb nuυ _{0} (0) nuυ. The physical vacuum is the even collocation of non-combinational nuυ _{0} or _{0}nuυ. It accord to the high energy physics experimental results of the transformation among the photons, masses quanta and charges quanta. In my paper ‘Quanta turn-advance ism, China Science && Technology Overview 131 192-210 (2011)’, QFT four-dimensional uncertainty principle and momentum-energy conservation law had been generalized as a five-dimensional equations: de Broglie wavelength as a position vector \\underline{q}= (i c t, r, s), momentum \\underline{P} = (i E / c, P, U c), \\underline{q} = i h / \\underline{P}, \\underline{q} \\underline{q} = 0, \\underline{P} \\underline{P} = 0, Sigma∑ \\underline{P} = \\underline{P} (0) . The five-dimensional time-space-spin had been quantized as a

Occupational contact dermatitis I: incidence and return to work pressures.

PubMed

Emmett, Edward A

2002-03-01

Since the passage of the United States Occupational Safety and Health Act (OSHA) in 1970, there have been extensive changes in United States workplaces that should have served to enhance the prevention of occupational skin disease (OSD). Analysis of skin diseases reported to OSHA (OSHA recordables) shows that the number of OSDs declined steadily from 1974 to 1983 to about half the previous annual incidence. After 1984, there was a modest resurgence peaking in 1994, with a subsequent decline. A similar but somewhat greater decline in the late 1990s has been observed for occupational respiratory diseases, diseases caused by toxic agents and for poisonings. Likely explanations for the trends in OSD are discussed; the initial decline probably reflected an improvement in workplace conditions, the later resurgence and decline may have been attributable to changes in recording behaviors and in worker's compensation. The decline in recorded OSD since 1996 has been fairly uniform in most major industrial sectors but has been less marked in agriculture, forestry, and fishing so that this sector has replaced manufacturing in recording the highest incidence rate. In 1999, the incidence rate of recorded OSD was 0.49 per 1,000 workers, which appears to grossly under report the true incidence. OSD now constitutes about 10% of all occupational disease cases. Currently, there is increasing emphasis in corporate and occupational medicine on reducing costs and maintaining productivity as well as in preventing occupational injuries and diseases. This is shown by the trend for a greater proportion of workers with occupational conditions to return to modified duty positions rather than to be completely off work. Implications of this phenomena for management of OSD are discussed. Copyright 2002, Elsevier Science (USA). All rights reserved.

Relationships of occupational and non-occupational physical activity to abdominal obesity.

PubMed

Steeves, J A; Bassett, D R; Thompson, D L; Fitzhugh, E C

2012-01-01

Physically active occupations may protect against the risk of abdominal obesity. This study assessed the interaction between non-occupational physical activity (NOA) (leisure-time, transport and domestic activity) and occupational activity (OA) in relation to abdominal obesity. A total of 3539 adults over the age of 20, with no work limitations, employed in one of the 17 occupations classified as low OA (LOA) or high OA (HOA) were identified in the 1999-2004 National Health and Nutrition Examination Survey. Waist circumference (WC) was used to categorize individuals into either non-obese or abdominally obese (WC>88 cm in women and >102 cm in men) categories. NOA was divided into three categories based upon physical activity guidelines: (1) no NOA; (2) insufficient NOA; and (3) sufficient NOA. Logistic regression was used to examine possible associations between NOA, OA and abdominal obesity. In those who are sedentary outside of work, a high-activity occupation reduces the odds risk ratio of being categorized with abdominal obesity to 0.37 in comparison with those who work in low-activity occupations. For people working in low-activity occupations, there was a clear association with activity outside of work and the odds risk ratio of being categorized with abdominal obesity. In these adults, a reduced odds ratio was found only among those who met the physical activity guidelines through NOA (odds ratio=0.55; 95% confidence interval (CI)=0.40-0.75). HOA is associated with a reduced risk of abdominal obesity. Thus, it is important to include OA in studies seeking to understand the association between physical activity and abdominal adiposity.

[Field investigation of occupational disease diagnosis in Guangdong Provincial Hospital for Occupational Disease Prevention and Treatment from 2009 to 2014: an analysis of 136 cases].

PubMed

Fan, C Y; Li, X D; Wen, W; Wang, Y Y; Zhang, Y; Lang, L

2016-04-20

To investigate the characteristics of 136 patients with occupational diseases, to summarize key techniques used in field investigation, and to provide a scientific basis for the development of standard operating procedures for field investigation of occupational disease diagnosis. Field investigation and routine data analysis were performed to analyze the cases diagnosed by Guangdong Provincial Hospital for Occupational Disease Prevention and Treatment from January 2009 to December 2014. A total of 136 cases of occupational diseases were diagnosed by Guangdong Provincial Hospital for Occupational Disease Prevention and Treatment from 2009 to 2014, and there were 66 cases of leukemia, 18 cases of suspected occupational benzene poisoning, 12 cases of suspected occupational handarm vibration disease, and 11 cases of suspected pneumoconiosis. Of all these patients, 41.91% were engaged in at least three types of work, 70.59% were exposed to at least three types of chemicals, 25.74% experienced changes in technical processes and chemicals, and 47.06% had disputes on the chemicals they were exposed to during verification by both parties. Occupational hazard factors were detected. Most samples (358)were used to measure benzene concentration in workplace air, among which 11.7% had a benzene concentration of >6.00 mg/m(3)(exceeding standard), 13.41% had a benzene concentration of 3.26~6.00 mg/m(3), 75.42% had a benzene concentration of<0.03 to <3.25 mg/m(3). The samples of suspected occupational hand-arm vibration disease, suspected pneumoconiosis, and suspected occupational noiseinduced hearing loss had high overstandard rates (100%, 93.8%, and 83.3%, respectively). Field investigation of occupational disease diagnosis reveals large numbers of cases of leukemia, suspected occupational benzene poisoning, suspected occupational hand-arm vibration disease, and suspected pneumoconiosis. The key aspects of field investigation include confirmation of the history of occupational

Occupational skin diseases, United States. Results from the Bureau of Labor Statistics Annual Survey of Occupational Injuries and Illnesses, 1973 through 1984.

PubMed

Mathias, C G; Morrison, J H

1988-10-01

The overall incidence rates, numbers, and proportions of occupational skin diseases recorded in the Bureau of Labor Statistics Annual Survey of Occupational Injuries and Illnesses, from 1973 through 1984, were reviewed, and a detailed analysis of occupational skin diseases recorded in the 1984 Annual Survey was performed. Overall incidence rates and numbers of cases declined from 1973 through 1983, but increased slightly in 1984. The major industrial divisions of agriculture and manufacturing have consistently had the highest rates and numbers of cases, respectively; skin diseases have accounted for almost two thirds of all occupational illnesses within agriculture. In the 1984 Annual Survey, 11 industries were ranked in the "Top 15" for both incidence rates and numbers of cases, at the two-digit Standard Industrial Classification level. At the four-digit level for manufacturing, four industries were also ranked in the "Top 15" for both indexes. This analysis has identified industries toward which research efforts should be directed to characterize those occupational activities or exposures most responsible for these higher risks.

[News on occupational contact dermatitis].

PubMed

Crépy, Marie-Noëlle; Bensefa-Colas, Lynda

2014-03-01

Contact dermatitis--irritant contact dermatitis, allergic contact dermatitis and protein contact dermatitis--are the most common occupational skin diseases, most often localized to the hands. Contact urticaria is rarer The main occupational irritants are wet work, detergents and disinfectants, cutting oils, and solvents. The main occupational allergens are rubber additives, metals (chromium, nickel, cobalt), plastics (epoxy resins, acrylic), biocides and plants. Diagnosis is based on clinical examination, medical history and allergy testing. For a number of irritating or sensitizing agents, irritant or allergic dermatitis can be notified as occupational diseases. The two main prevention measures are reducing skin contact with irritants and complete avoidance of skin contact with offending allergens.

Potential Health Effects Associated with Dermal Exposure to Occupational Chemicals

PubMed Central

Anderson, Stacey E; Meade, B Jean

2014-01-01

There are a large number of workers in the United States, spanning a variety of occupational industries and sectors, who are potentially exposed to chemicals that can be absorbed through the skin. Occupational skin exposures can result in numerous diseases that can adversely affect an individual’s health and capacity to perform at work. In general, there are three types of chemical–skin interactions of concern: direct skin effects, immune-mediated skin effects, and systemic effects. While hundreds of chemicals (metals, epoxy and acrylic resins, rubber additives, and chemical intermediates) present in virtually every industry have been identified to cause direct and immune-mediated effects such as contact dermatitis or urticaria, less is known about the number and types of chemicals contributing to systemic effects. In an attempt to raise awareness, skin notation assignments communicate the potential for dermal absorption; however, there is a need for standardization among agencies to communicate an accurate description of occupational hazards. Studies have suggested that exposure to complex mixtures, excessive hand washing, use of hand sanitizers, high frequency of wet work, and environmental or other factors may enhance penetration and stimulate other biological responses altering the outcomes of dermal chemical exposure. Understanding the hazards of dermal exposure is essential for the proper implementation of protective measures to ensure worker safety and health. PMID:25574139

Potential health effects associated with dermal exposure to occupational chemicals.

PubMed

Anderson, Stacey E; Meade, B Jean

2014-01-01

There are a large number of workers in the United States, spanning a variety of occupational industries and sectors, who are potentially exposed to chemicals that can be absorbed through the skin. Occupational skin exposures can result in numerous diseases that can adversely affect an individual's health and capacity to perform at work. In general, there are three types of chemical-skin interactions of concern: direct skin effects, immune-mediated skin effects, and systemic effects. While hundreds of chemicals (metals, epoxy and acrylic resins, rubber additives, and chemical intermediates) present in virtually every industry have been identified to cause direct and immune-mediated effects such as contact dermatitis or urticaria, less is known about the number and types of chemicals contributing to systemic effects. In an attempt to raise awareness, skin notation assignments communicate the potential for dermal absorption; however, there is a need for standardization among agencies to communicate an accurate description of occupational hazards. Studies have suggested that exposure to complex mixtures, excessive hand washing, use of hand sanitizers, high frequency of wet work, and environmental or other factors may enhance penetration and stimulate other biological responses altering the outcomes of dermal chemical exposure. Understanding the hazards of dermal exposure is essential for the proper implementation of protective measures to ensure worker safety and health.

Occupational Psychiatric Disorders in Korea

PubMed Central

Kang, Seong-Kyu

2010-01-01

We searched databases and used various online resources to identify and systematically review all articles on occupational psychiatric disorders among Korean workers published in English and Korean before 2009. Three kinds of occupational psychiatric disorders were studied: disorders related to job stress and mental illness, psychiatric symptoms emerging in victims of industrial injuries, and occupational psychiatric disorders compensated by Industrial Accident Compensation Insurance (IACI). Korea does not maintain official statistical records for occupational psychiatric disorders, but several studies have estimated the number of occupational psychiatric disorders using the Korea Workers' Compensation and Welfare Service (COMWEL, formerly KLWC) database. The major compensated occupational psychiatric disorders in Korea were "personality and behavioral disorders due to brain disease, damage, and dysfunction", "other mental disorders due to brain damage and dysfunction and to physical diseases", "reactions to severe stress and adjustment disorders", and "depressive episodes". The most common work-related psychiatric disorders, excluding accidents, were "neurotic, stress-related, and somatoform disorders" followed by "mood disorders". PMID:21258596

Occupational cancer in Italy.

PubMed Central

Merler, E; Vineis, P; Alhaique, D; Miligi, L

1999-01-01

This article is a discussion of occupational cancer in Italy. The introduction provides the necessary context of Italian industrialization and occupational health regulation. This is followed by a review of Italian epidemiologic studies of occupational cancer risks considered in terms of relative measures of risk and attributable risk of carcinogenic agents or exposure circumstances. We attempt to establish the number of workers exposed to carcinogens in Italy and the intensity of their exposures. Finally, the Italian system of compensation for occupational cancer is discussed. Several cohort and case-control studies have addressed the issue of occupational risks, mostly among male workers. The results of these studies suggest that the growing incidence of and mortality by mesothelioma is explained by the widespread and intense exposure to asbestos in some Italian industrial settings. A high attributable risk of lung tumors among male populations in industrial areas of northern Italy is explained by occupational exposures. However, insufficient data are available for clear definition of the extent and intensity of occupational exposure to carcinogenic substances. In Italy, we must prioritize and maximize resources in occupational cancer epidemiology and revitalize the role of national institutions. Recent legislation has established new regulations on the handling of carcinogenic substances in industrial settings, a new list of occupational diseases, and a national registry of mesothelioma linked to asbestos exposure. These legislative changes are expected to have positive effects. PMID:10350509

Supersymmetric Properties of Hadron Physics from Light-Front Holography and Superconformal Algebra and other Advances in Light-Front QCD

DOE PAGES

Brodsky, Stanley J.

2018-03-06

Here, light-front holography, together with superconformal algebra, have provided new insights into the physics of color confinement and the spectroscopy and dynamics of hadrons. As shown by de Alfaro, Fubini and Furlan, a mass scale can appear in the equations of motion without affecting the conformal invariance of the action if one adds a term to the Hamiltonian proportional to the dilatation operator or the special conformal operator. If one applies the procedure of de Alfaro et al. to the frame-independent light-front Hamiltonian, it leads uniquely to a confining qq¯ potential κ 4ζ 2, where ζ 2 is the light-frontmore » radial variable related in momentum space to the qq¯ invariant mass. The same result, including spin terms, is obtained using light-front holography—the duality between the front form and AdS 5, the space of isometries of the conformal group—if one modifies the action of AdS 5 by the dilaton e κ2 z2 in the fifth dimension z. When one generalizes this procedure using superconformal algebra, the resulting light-front eigensolutions lead to a a unified Regge spectroscopy of meson, baryon, and tetraquarks, including supersymmetric relations between their masses and their wavefunctions. One also predicts hadronic light-front wavefunctions and observables such as structure functions, transverse momentum distributions, and the distribution amplitudes. The mass scale κ underlying confinement and hadron masses can be connected to the parameter Λ MS¯ in the QCD running coupling by matching the nonperturbative dynamics to the perturbative QCD regime. The result is an effective coupling α s(Q 2) defined at all momenta. The matching of the high and low momentum transfer regimes determines a scale Q 0 which sets the interface between perturbative and nonperturbative hadron dynamics. I also discuss a number of applications of light-front phenomenology.« less

Supersymmetric Properties of Hadron Physics from Light-Front Holography and Superconformal Algebra and other Advances in Light-Front QCD

NASA Astrophysics Data System (ADS)

Brodsky, Stanley J.

2018-05-01

Light-front holography, together with superconformal algebra, have provided new insights into the physics of color confinement and the spectroscopy and dynamics of hadrons. As shown by de Alfaro, Fubini and Furlan, a mass scale can appear in the equations of motion without affecting the conformal invariance of the action if one adds a term to the Hamiltonian proportional to the dilatation operator or the special conformal operator. If one applies the procedure of de Alfaro et al. to the frame-independent light-front Hamiltonian, it leads uniquely to a confining q \\bar{q} potential κ ^4 ζ ^2, where ζ ^2 is the light-front radial variable related in momentum space to the q \\bar{q} invariant mass. The same result, including spin terms, is obtained using light-front holography—the duality between the front form and AdS_5, the space of isometries of the conformal group—if one modifies the action of AdS_5 by the dilaton e^{κ ^2 z^2} in the fifth dimension z. When one generalizes this procedure using superconformal algebra, the resulting light-front eigensolutions lead to a a unified Regge spectroscopy of meson, baryon, and tetraquarks, including supersymmetric relations between their masses and their wavefunctions. One also predicts hadronic light-front wavefunctions and observables such as structure functions, transverse momentum distributions, and the distribution amplitudes. The mass scale κ underlying confinement and hadron masses can be connected to the parameter Λ_{\\overline{MS}} in the QCD running coupling by matching the nonperturbative dynamics to the perturbative QCD regime. The result is an effective coupling α _s(Q^2) defined at all momenta. The matching of the high and low momentum transfer regimes determines a scale Q_0 which sets the interface between perturbative and nonperturbative hadron dynamics. I also discuss a number of applications of light-front phenomenology.

Supersymmetric Properties of Hadron Physics from Light-Front Holography and Superconformal Algebra and other Advances in Light-Front QCD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brodsky, Stanley J.

Here, light-front holography, together with superconformal algebra, have provided new insights into the physics of color confinement and the spectroscopy and dynamics of hadrons. As shown by de Alfaro, Fubini and Furlan, a mass scale can appear in the equations of motion without affecting the conformal invariance of the action if one adds a term to the Hamiltonian proportional to the dilatation operator or the special conformal operator. If one applies the procedure of de Alfaro et al. to the frame-independent light-front Hamiltonian, it leads uniquely to a confining qq¯ potential κ 4ζ 2, where ζ 2 is the light-frontmore » radial variable related in momentum space to the qq¯ invariant mass. The same result, including spin terms, is obtained using light-front holography—the duality between the front form and AdS 5, the space of isometries of the conformal group—if one modifies the action of AdS 5 by the dilaton e κ2 z2 in the fifth dimension z. When one generalizes this procedure using superconformal algebra, the resulting light-front eigensolutions lead to a a unified Regge spectroscopy of meson, baryon, and tetraquarks, including supersymmetric relations between their masses and their wavefunctions. One also predicts hadronic light-front wavefunctions and observables such as structure functions, transverse momentum distributions, and the distribution amplitudes. The mass scale κ underlying confinement and hadron masses can be connected to the parameter Λ MS¯ in the QCD running coupling by matching the nonperturbative dynamics to the perturbative QCD regime. The result is an effective coupling α s(Q 2) defined at all momenta. The matching of the high and low momentum transfer regimes determines a scale Q 0 which sets the interface between perturbative and nonperturbative hadron dynamics. I also discuss a number of applications of light-front phenomenology.« less

Supernovae with two peaks in the optical light curve and the signature of progenitors with low-mass extended envelopes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakar, Ehud; Piro, Anthony L.

2014-06-20

Early observations of supernova light curves are powerful tools for shedding light on the pre-explosion structures of their progenitors and their mass-loss histories just prior to explosion. Some core-collapse supernovae that are detected during the first days after the explosion prominently show two peaks in the optical bands, including the R and I bands, where the first peak appears to be powered by the cooling of shocked surface material and the second peak is clearly powered by radioactive decay. Such light curves have been explored in detail theoretically for SN 1993J and 2011dh, where it was found that they maymore » be explained by progenitors with extended, low-mass envelopes. Here, we generalize these results. We first explore whether any double-peaked light curve of this type can be generated by a progenitor with a 'standard' density profile, such as a red supergiant or a Wolf-Rayet star. We show that a standard progenitor (1) cannot produce a double-peaked light curve in the R and I bands and (2) cannot exhibit a fast drop in the bolometric luminosity as is seen after the first peak. We then explore the signature of a progenitor with a compact core surrounded by extended, low-mass material. This may be a hydrostatic low-mass envelope or material ejected just prior to the explosion. We show that it naturally produces both of these features. We use this result to provide simple formulae to estimate (1) the mass of the extended material from the time of the first peak, (2) the extended material radius from the luminosity of the first peak, and (3) an upper limit on the core radius from the luminosity minimum between the two peaks.« less

Occupational cancer in the United Kingdom.

PubMed Central

Coggon, D

1999-01-01

Most of the known occupational hazards of cancer have occurred in the United Kingdom. Over recent decades a contraction of manufacturing industry and legal controls on carcinogens have led to reductions in exposure, but cases continue to occur, often as a consequence of exposures 20 or more years ago. By far the most important occupational cause of cancer in the United Kingdom is asbestos, which currently accounts for some 600 cases of mesothelioma and perhaps 100 cases of bronchial carcinoma per year. Recent trends suggest that the number of mesothelioma cases attributable to asbestos will increase over the next few decades. Exposure to sunlight in outdoor work may cause several hundred cases of nonmelanomatous skin cancer per year, and occupational exposure to polycyclic aromatic hydrocarbons could be responsible for a similar number of skin and lung tumors. Other known occupational hazards of cancer are unlikely to account for more than 100 cases per year in total. PMID:10350506

Matrix light and pixel light: optical system architecture and requirements to the light source

NASA Astrophysics Data System (ADS)

Spinger, Benno; Timinger, Andreas L.

2015-09-01

Modern Automotive headlamps enable improved functionality for more driving comfort and safety. Matrix or Pixel light headlamps are not restricted to either pure low beam functionality or pure high beam. Light in direction of oncoming traffic is selectively switched of, potential hazard can be marked via an isolated beam and the illumination on the road can even follow a bend. The optical architectures that enable these advanced functionalities are diverse. Electromechanical shutters and lens units moved by electric motors were the first ways to realize these systems. Switching multiple LED light sources is a more elegant and mechanically robust solution. While many basic functionalities can already be realized with a limited number of LEDs, an increasing number of pixels will lead to more driving comfort and better visibility. The required optical system needs not only to generate a desired beam distribution with a high angular dynamic, but also needs to guarantee minimal stray light and cross talk between the different pixels. The direct projection of the LED array via a lens is a simple but not very efficient optical system. We discuss different optical elements for pre-collimating the light with minimal cross talk and improved contrast between neighboring pixels. Depending on the selected optical system, we derive the basic light source requirements: luminance, surface area, contrast, flux and color homogeneity.

A comparison of some of the characteristics of patients with occupational and non-occupational asthma.

PubMed

Axon, E J; Beach, J R; Burge, P S

1995-04-01

Occupational asthma is the most frequently diagnosed occupational lung disease reported to the SWORD (Surveillance of Work-related and Occupational Respiratory Disease) scheme. However, diagnosing occupational asthma is not straightforward, and establishing a link with work may be difficult. This study was undertaken to determine the differences between patients with occupational asthma and those with non-occupational asthma which might help in their diagnosis. Information was collected using a self-completed questionnaire. Questionnaires were distributed to 30 subjects aged 18-65 years at each of two clinics--one for patients with occupational asthma and one for those with cryptogenic and environmental asthma. Replies were received from 26 patients with occupational asthma (87%) and 29 patients with non-occupational asthma (97%). The age of onset was significantly higher for those with occupational asthma (42.6 vs 20.7 years). Significantly more subjects with occupational asthma reported improvement on holiday, whereas no significant difference was found in the numbers reporting worsening of symptoms on work days. Those with occupational asthma were less likely to report seasonal variation in symptoms, exacerbation by allergies, pets and stress, or a family history of asthma. Subjects with occupational asthma were more likely to become unemployed (50% vs 3%). Recognition of some of these features in a patient's history may help in the difficult task of differentiating occupational from non-occupational asthma, potentially avoiding the need for exhaustive investigations in some patients. The high prevalence of holiday improvement among subjects with non-occupational asthma suggested that domestic or environmental allergies arising outside the workplace may have been making an important contribution to ongoing symptoms in these subjects.

Stochastic Modeling of Overtime Occupancy and Its Application in Building Energy Simulation and Calibration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Kaiyu; Yan, Da; Hong, Tianzhen

2014-02-28

Overtime is a common phenomenon around the world. Overtime drives both internal heat gains from occupants, lighting and plug-loads, and HVAC operation during overtime periods. Overtime leads to longer occupancy hours and extended operation of building services systems beyond normal working hours, thus overtime impacts total building energy use. Current literature lacks methods to model overtime occupancy because overtime is stochastic in nature and varies by individual occupants and by time. To address this gap in the literature, this study aims to develop a new stochastic model based on the statistical analysis of measured overtime occupancy data from an officemore » building. A binomial distribution is used to represent the total number of occupants working overtime, while an exponential distribution is used to represent the duration of overtime periods. The overtime model is used to generate overtime occupancy schedules as an input to the energy model of a second office building. The measured and simulated cooling energy use during the overtime period is compared in order to validate the overtime model. A hybrid approach to energy model calibration is proposed and tested, which combines ASHRAE Guideline 14 for the calibration of the energy model during normal working hours, and a proposed KS test for the calibration of the energy model during overtime. The developed stochastic overtime model and the hybrid calibration approach can be used in building energy simulations to improve the accuracy of results, and better understand the characteristics of overtime in office buildings.« less

Occupancy models to study wildlife

USGS Publications Warehouse

Bailey, Larissa; Adams, Michael John

2005-01-01

Many wildlife studies seek to understand changes or differences in the proportion of sites occupied by a species of interest. These studies are hampered by imperfect detection of these species, which can result in some sites appearing to be unoccupied that are actually occupied. Occupancy models solve this problem and produce unbiased estimates of occupancy and related parameters. Required data (detection/non-detection information) are relatively simple and inexpensive to collect. Software is available free of charge to aid investigators in occupancy estimation.

Hadronic light-by-light scattering contribution to the muon anomalous magnetic moment from lattice QCD

DOE PAGES

Blum, Thomas; Chowdhury, Saumitra; Hayakawa, Masashi; ...

2015-01-07

The form factor that yields the light-by-light scattering contribution to the muon anomalous magnetic moment is computed in lattice QCD+QED and QED. A non-perturbative treatment of QED is used and is checked against perturbation theory. The hadronic contribution is calculated for unphysical quark and muon masses, and only the diagram with a single quark loop is computed. Statistically significant signals are obtained. Initial results appear promising, and the prospect for a complete calculation with physical masses and controlled errors is discussed.

Shedding light on neutrino masses with dark forces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Batell, Brian; Pospelov, Maxim; Shuve, Brian

Heavy right-handed neutrinos, N , provide the simplest explanation for the origin of light neutrino masses and mixings. If M N is at or below the weak scale, direct experimental discovery of these states is possible at accelerator experiments such as the LHC or new dedicated beam dump experiments; in these experiments, N decays after traversing a macroscopic distance from the collision point. The experimental sensitivity to right-handed neutrinos is significantly enhanced if there is a new “dark” gauge force connecting them to the Standard Model (SM), and detection of N can be the primary discovery mode for the newmore » dark force itself. We take the well-motivated example of a B – L gauge symmetry and analyze the sensitivity to displaced decays of N produced via the new gauge interaction in two experiments: the LHC and the proposed SHiP beam dump experiment. In the most favorable case in which the mediator can be produced on-shell and decays to right handed neutrinos (pp → X + V B–L → X + N N ), the sensitivity reach is controlled by the square of the B – L gauge coupling. Here, we demonstrate that these experiments could access neutrino parameters responsible for the observed SM neutrino masses and mixings in the most straightforward implementation of the see-saw mechanism.« less

Shedding light on neutrino masses with dark forces

DOE PAGES

Batell, Brian; Pospelov, Maxim; Shuve, Brian

2016-08-08

Heavy right-handed neutrinos, N , provide the simplest explanation for the origin of light neutrino masses and mixings. If M N is at or below the weak scale, direct experimental discovery of these states is possible at accelerator experiments such as the LHC or new dedicated beam dump experiments; in these experiments, N decays after traversing a macroscopic distance from the collision point. The experimental sensitivity to right-handed neutrinos is significantly enhanced if there is a new “dark” gauge force connecting them to the Standard Model (SM), and detection of N can be the primary discovery mode for the newmore » dark force itself. We take the well-motivated example of a B – L gauge symmetry and analyze the sensitivity to displaced decays of N produced via the new gauge interaction in two experiments: the LHC and the proposed SHiP beam dump experiment. In the most favorable case in which the mediator can be produced on-shell and decays to right handed neutrinos (pp → X + V B–L → X + N N ), the sensitivity reach is controlled by the square of the B – L gauge coupling. Here, we demonstrate that these experiments could access neutrino parameters responsible for the observed SM neutrino masses and mixings in the most straightforward implementation of the see-saw mechanism.« less

78 FR 64504 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH or..., Number 177, Pages 56235-56236. Contact Person for More Information: Price Connor, Ph.D., NIOSH Health...

Somatic symptoms among cosmetologists compared to women in other occupations.

PubMed

Gallicchio, Lisa; Miller, Susan R; Greene, Teresa; Zacur, Howard; Flaws, Jodi A

2011-04-01

Although the literature pertaining to the cosmetology occupation and specific health effects, such as asthma, dermatitis, and reproductive function, has grown substantially, little information is available about whether cosmetologists are at increased risk of other symptoms compared to women working in other occupations. Thus, the purpose of this study was to determine if cosmetologists of reproductive age are at increased risk of self-reported symptoms compared to women of the same age working in other occupations. Data were analyzed from 450 cosmetologists and 511 women in other occupations, aged 21-55 years, in the Baltimore metropolitan region who responded to a mailed survey that ascertained detailed data on symptoms as well as usual work tasks. The data showed that cosmetologists were at increased risk of memory and sleep disturbances, muscle weakness, throat irritation, and hot flashes compared to women of the same age working in other occupations after adjustment for confounders, including cigarette smoking. Among the cosmetologists, handling cleaning supplies; hair bleaching; use of straighteners, texturizers, or permanent chemicals; and several nail care work tasks were associated with one or more of the queried symptoms. Findings from this study suggest that, compared to noncosmetologists, cosmetologists are at increased risk for a number of symptoms reported to be associated with decreased quality of life. These symptoms may also reflect chronic exposure to chemicals that have been shown to be related to more severe long-term health outcomes.

From the trees to the forest: a review of radiative neutrino mass models

NASA Astrophysics Data System (ADS)

Cai, Yi; Herrero García, Juan; Schmidt, Michael A.; Vicente, Avelino; Volkas, Raymond R.

2017-12-01

A plausible explanation for the lightness of neutrino masses is that neutrinos are massless at tree level, with their mass (typically Majorana) being generated radiatively at one or more loops. The new couplings, together with the suppression coming from the loop factors, imply that the new degrees of freedom cannot be too heavy (they are typically at the TeV scale). Therefore, in these models there are no large mass hierarchies and they can be tested using different searches, making their detailed phenomenological study very appealing. In particular, the new particles can be searched for at colliders and generically induce signals in lepton-flavor and lepton-number violating processes (in the case of Majorana neutrinos), which are not independent from reproducing correctly the neutrino masses and mixings. The main focus of the review is on Majorana neutrinos. We order the allowed theory space from three different perspectives: (i) using an effective operator approach to lepton number violation, (ii) by the number of loops at which the Weinberg operator is generated, (iii) within a given loop order, by the possible irreducible topologies. We also discuss in more detail some popular radiative models which involve qualitatively different features, revisiting their most important phenomenological implications. Finally, we list some promising avenues to pursue.

Artificial light at night affects body mass but not oxidative status in free-living nestling songbirds: an experimental study.

PubMed

Raap, Thomas; Casasole, Giulia; Costantini, David; AbdElgawad, Hamada; Asard, Han; Pinxten, Rianne; Eens, Marcel

2016-10-19

Artificial light at night (ALAN), termed light pollution, is an increasingly important anthropogenic environmental pressure on wildlife. Exposure to unnatural lighting environments may have profound effects on animal physiology, particularly during early life. Here, we experimentally investigated for the first time the impact of ALAN on body mass and oxidative status during development, using nestlings of a free-living songbird, the great tit (Parus major), an important model species. Body mass and blood oxidative status were determined at baseline (=13 days after hatching) and again after a two night exposure to ALAN. Because it is very difficult to generalise the oxidative status from one or two measures we relied on a multi-biomarker approach. We determined multiple metrics of both antioxidant defences and oxidative damage: molecular antioxidants GSH, GSSG; antioxidant enzymes GPX, SOD, CAT; total non-enzymatic antioxidant capacity and damage markers protein carbonyls and TBARS. Light exposed nestlings showed no increase in body mass, in contrast to unexposed individuals. None of the metrics of oxidative status were affected. Nonetheless, our study provides experimental field evidence that ALAN may negatively affect free-living nestlings' development and hence may have adverse consequences lasting throughout adulthood.

Artificial light at night affects body mass but not oxidative status in free-living nestling songbirds: an experimental study

PubMed Central

Raap, Thomas; Casasole, Giulia; Costantini, David; AbdElgawad, Hamada; Asard, Han; Pinxten, Rianne; Eens, Marcel

2016-01-01

Artificial light at night (ALAN), termed light pollution, is an increasingly important anthropogenic environmental pressure on wildlife. Exposure to unnatural lighting environments may have profound effects on animal physiology, particularly during early life. Here, we experimentally investigated for the first time the impact of ALAN on body mass and oxidative status during development, using nestlings of a free-living songbird, the great tit (Parus major), an important model species. Body mass and blood oxidative status were determined at baseline (=13 days after hatching) and again after a two night exposure to ALAN. Because it is very difficult to generalise the oxidative status from one or two measures we relied on a multi-biomarker approach. We determined multiple metrics of both antioxidant defences and oxidative damage: molecular antioxidants GSH, GSSG; antioxidant enzymes GPX, SOD, CAT; total non-enzymatic antioxidant capacity and damage markers protein carbonyls and TBARS. Light exposed nestlings showed no increase in body mass, in contrast to unexposed individuals. None of the metrics of oxidative status were affected. Nonetheless, our study provides experimental field evidence that ALAN may negatively affect free-living nestlings’ development and hence may have adverse consequences lasting throughout adulthood. PMID:27759087

Occupational radiation dose to eyes from endoscopic retrograde cholangiopancreatography procedures in light of the revised eye lens dose limit from the International Commission on Radiological Protection.

PubMed

O'Connor, U; Gallagher, A; Malone, L; O'Reilly, G

2013-02-01

Endoscopic retrograde cholangiopancreatography (ERCP) is a common procedure that combines the use of X-ray fluoroscopy and endoscopy for examination of the bile duct. Published data on ERCP doses are limited, including staff eye dose from ERCP. Occupational eye doses are of particular interest now as the International Commission on Radiological Protection (ICRP) has recommended a reduction in the dose limit to the lens of the eye. The aim of this study was to measure occupational eye doses obtained from ERCP procedures. A new eye lens dosemeter (EYE-D(™), Radcard, Krakow, Poland) was used to measure the ERCP eye dose, H(p)(3), at two endoscopy departments in Ireland. A review of radiation protection practice at the two facilities was also carried out. The mean equivalent dose to the lens of the eye of a gastroenterologist is 0.01 mSv per ERCP procedure with an undercouch X-ray tube and 0.09 mSv per ERCP procedure with an overcouch X-ray tube. Staff eye dose normalised to patient kerma area product is also presented. Staff eye doses in ERCP have the potential to exceed the revised ICRP limit of 20 mSv per annum when an overcouch X-ray tube is used. The EYE-D dosemeter was found to be a convenient method for measuring lens dose. Eye doses in areas outside of radiology departments should be kept under review, particularly in light of the new ICRP eye dose limit. Occupational eye lens doses from ERCP procedures have been established using a new commercially available dedicated H(p)(3) dosemeter.

Precision measurement of the mass difference between light nuclei and anti-nuclei

NASA Astrophysics Data System (ADS)

Alice Collaboration; Adam, J.; Adamová, D.; Aggarwal, M. M.; Aglieri Rinella, G.; Agnello, M.; Agrawal, N.; Ahammed, Z.; Ahmed, I.; Ahn, S. U.; Aimo, I.; Aiola, S.; Ajaz, M.; Akindinov, A.; Alam, S. N.; Aleksandrov, D.; Alessandro, B.; Alexandre, D.; Alfaro Molina, R.; Alici, A.; Alkin, A.; Alme, J.; Alt, T.; Altinpinar, S.; Altsybeev, I.; Alves Garcia Prado, C.; Andrei, C.; Andronic, A.; Anguelov, V.; Anielski, J.; Antičić, T.; Antinori, F.; Antonioli, P.; Aphecetche, L.; Appelshäuser, H.; Arcelli, S.; Armesto, N.; Arnaldi, R.; Aronsson, T.; Arsene, I. C.; Arslandok, M.; Augustinus, A.; Averbeck, R.; Azmi, M. D.; Bach, M.; Badalà, A.; Baek, Y. W.; Bagnasco, S.; Bailhache, R.; Bala, R.; Baldisseri, A.; Ball, M.; Baltasar Dos Santos Pedrosa, F.; Baral, R. C.; Barbano, A. M.; Barbera, R.; Barile, F.; Barnaföldi, G. G.; Barnby, L. S.; Barret, V.; Bartalini, P.; Bartke, J.; Bartsch, E.; Basile, M.; Bastid, N.; Basu, S.; Bathen, B.; Batigne, G.; Batista Camejo, A.; Batyunya, B.; Batzing, P. C.; Bearden, I. G.; Beck, H.; Bedda, C.; Behera, N. K.; Belikov, I.; Bellini, F.; Bello Martinez, H.; Bellwied, R.; Belmont, R.; Belmont-Moreno, E.; Belyaev, V.; Bencedi, G.; Beole, S.; Berceanu, I.; Bercuci, A.; Berdnikov, Y.; Berenyi, D.; Bertens, R. A.; Berzano, D.; Betev, L.; Bhasin, A.; Bhat, I. R.; Bhati, A. K.; Bhattacharjee, B.; Bhom, J.; Bianchi, L.; Bianchi, N.; Bianchin, C.; Bielčík, J.; Bielčíková, J.; Bilandzic, A.; Biswas, S.; Bjelogrlic, S.; Blanco, F.; Blau, D.; Blume, C.; Bock, F.; Bogdanov, A.; Bøggild, H.; Boldizsár, L.; Bombara, M.; Book, J.; Borel, H.; Borissov, A.; Borri, M.; Bossú, F.; Botje, M.; Botta, E.; Böttger, S.; Braun-Munzinger, P.; Bregant, M.; Breitner, T.; Broker, T. A.; Browning, T. A.; Broz, M.; Brucken, E. J.; Bruna, E.; Bruno, G. E.; Budnikov, D.; Buesching, H.; Bufalino, S.; Buncic, P.; Busch, O.; Buthelezi, Z.; Buxton, J. T.; Caffarri, D.; Cai, X.; Caines, H.; Calero Diaz, L.; Caliva, A.; Calvo Villar, E.; Camerini, P.; Carena, F.; Carena, W.; Castillo Castellanos, J.; Castro, A. J.; Casula, E. A. R.; Cavicchioli, C.; Ceballos Sanchez, C.; Cepila, J.; Cerello, P.; Chang, B.; Chapeland, S.; Chartier, M.; Charvet, J. L.; Chattopadhyay, Subhasis; Chattopadhyay, Sukalyan; Chelnokov, V.; Cherney, M.; Cheshkov, C.; Cheynis, B.; Chibante Barroso, V.; Chinellato, D. D.; Chochula, P.; Choi, K.; Chojnacki, M.; Choudhury, S.; Christakoglou, P.; Christensen, C. H.; Christiansen, P.; Chujo, T.; Chung, S. U.; Cicalo, C.; Cifarelli, L.; Cindolo, F.; Cleymans, J.; Colamaria, F.; Colella, D.; Collu, A.; Colocci, M.; Conesa Balbastre, G.; Conesa Del Valle, Z.; Connors, M. E.; Contreras, J. G.; Cormier, T. M.; Corrales Morales, Y.; Cortés Maldonado, I.; Cortese, P.; Cosentino, M. R.; Costa, F.; Crochet, P.; Cruz Albino, R.; Cuautle, E.; Cunqueiro, L.; Dahms, T.; Dainese, A.; Danu, A.; Das, D.; Das, I.; Das, S.; Dash, A.; Dash, S.; de, S.; de Caro, A.; de Cataldo, G.; de Cuveland, J.; de Falco, A.; de Gruttola, D.; De Marco, N.; de Pasquale, S.; Deisting, A.; Deloff, A.; Dénes, E.; D'Erasmo, G.; di Bari, D.; di Mauro, A.; di Nezza, P.; Diaz Corchero, M. A.; Dietel, T.; Dillenseger, P.; Divià, R.; Djuvsland, Ø.; Dobrin, A.; Dobrowolski, T.; Domenicis Gimenez, D.; Dönigus, B.; Dordic, O.; Dubey, A. K.; Dubla, A.; Ducroux, L.; Dupieux, P.; Ehlers, R. J.; Elia, D.; Engel, H.; Erazmus, B.; Erhardt, F.; Eschweiler, D.; Espagnon, B.; Estienne, M.; Esumi, S.; Evans, D.; Evdokimov, S.; Eyyubova, G.; Fabbietti, L.; Fabris, D.; Faivre, J.; Fantoni, A.; Fasel, M.; Feldkamp, L.; Felea, D.; Feliciello, A.; Feofilov, G.; Ferencei, J.; Fernández Téllez, A.; Ferreiro, E. G.; Ferretti, A.; Festanti, A.; Figiel, J.; Figueredo, M. A. S.; Filchagin, S.; Finogeev, D.; Fionda, F. M.; Fiore, E. M.; Fleck, M. G.; Floris, M.; Foertsch, S.; Foka, P.; Fokin, S.; Fragiacomo, E.; Francescon, A.; Frankenfeld, U.; Fuchs, U.; Furget, C.; Furs, A.; Fusco Girard, M.; Gaardhøje, J. J.; Gagliardi, M.; Gago, A. M.; Gallio, M.; Gangadharan, D. R.; Ganoti, P.; Gao, C.; Garabatos, C.; Garcia-Solis, E.; Gargiulo, C.; Gasik, P.; Germain, M.; Gheata, A.; Gheata, M.; Ghosh, P.; Ghosh, S. K.; Gianotti, P.; Giubellino, P.; Giubilato, P.; Gladysz-Dziadus, E.; Glässel, P.; Goméz Coral, D. M.; Gomez Ramirez, A.; González-Zamora, P.; Gorbunov, S.; Görlich, L.; Gotovac, S.; Grabski, V.; Graczykowski, L. K.; Grelli, A.; Grigoras, A.; Grigoras, C.; Grigoriev, V.; Grigoryan, A.; Grigoryan, S.; Grinyov, B.; Grion, N.; Grosse-Oetringhaus, J. F.; Grossiord, J.-Y.; Grosso, R.; Guber, F.; Guernane, R.; Guerzoni, B.; Gulbrandsen, K.; Gulkanyan, H.; Gunji, T.; Gupta, A.; Gupta, R.; Haake, R.; Haaland, Ø.; Hadjidakis, C.; Haiduc, M.; Hamagaki, H.; Hamar, G.; Hanratty, L. D.; Hansen, A.; Harris, J. W.; Hartmann, H.; Harton, A.; Hatzifotiadou, D.; Hayashi, S.; Heckel, S. T.; Heide, M.; Helstrup, H.; Herghelegiu, A.; Herrera Corral, G.; Hess, B. A.; Hetland, K. F.; Hilden, T. E.; Hillemanns, H.; Hippolyte, B.; Hristov, P.; Huang, M.; Humanic, T. J.; Hussain, N.; Hussain, T.; Hutter, D.; Hwang, D. S.; Ilkaev, R.; Ilkiv, I.; Inaba, M.; Ionita, C.; Ippolitov, M.; Irfan, M.; Ivanov, M.; Ivanov, V.; Izucheev, V.; Jacobs, P. M.; Jahnke, C.; Jang, H. J.; Janik, M. A.; Jayarathna, P. H. S. Y.; Jena, C.; Jena, S.; Jimenez Bustamante, R. T.; Jones, P. G.; Jung, H.; Jusko, A.; Kalinak, P.; Kalweit, A.; Kamin, J.; Kang, J. H.; Kaplin, V.; Kar, S.; Karasu Uysal, A.; Karavichev, O.; Karavicheva, T.; Karpechev, E.; Kebschull, U.; Keidel, R.; Keijdener, D. L. D.; Keil, M.; Khan, K. H.; Khan, M. Mohisin; Khan, P.; Khan, S. A.; Khanzadeev, A.; Kharlov, Y.; Kileng, B.; Kim, B.; Kim, D. W.; Kim, D. J.; Kim, H.; Kim, J. S.; Kim, Mimae.; Kim, Minwoo; Kim, S.; Kim, T.; Kirsch, S.; Kisel, I.; Kiselev, S.; Kisiel, A.; Kiss, G.; Klay, J. L.; Klein, C.; Klein, J.; Klein-Bösing, C.; Kluge, A.; Knichel, M. L.; Knospe, A. G.; Kobayashi, T.; Kobdaj, C.; Kofarago, M.; Köhler, M. K.; Kollegger, T.; Kolojvari, A.; Kondratiev, V.; Kondratyeva, N.; Kondratyuk, E.; Konevskikh, A.; Kour, M.; Kouzinopoulos, C.; Kovalenko, V.; Kowalski, M.; Kox, S.; Koyithatta Meethaleveedu, G.; Kral, J.; Králik, I.; Kravčáková, A.; Krelina, M.; Kretz, M.; Krivda, M.; Krizek, F.; Kryshen, E.; Krzewicki, M.; Kubera, A. M.; Kučera, V.; Kucheriaev, Y.; Kugathasan, T.; Kuhn, C.; Kuijer, P. G.; Kulakov, I.; Kumar, A.; Kumar, J.; Kumar, L.; Kurashvili, P.; Kurepin, A.; Kurepin, A. B.; Kuryakin, A.; Kushpil, S.; Kweon, M. J.; Kwon, Y.; La Pointe, S. L.; La Rocca, P.; Lagana Fernandes, C.; Lakomov, I.; Langoy, R.; Lara, C.; Lardeux, A.; Lattuca, A.; Laudi, E.; Lea, R.; Leardini, L.; Lee, G. R.; Lee, S.; Legrand, I.; Lehnert, J.; Lemmon, R. C.; Lenti, V.; Leogrande, E.; León Monzón, I.; Leoncino, M.; Lévai, P.; Li, S.; Li, X.; Lien, J.; Lietava, R.; Lindal, S.; Lindenstruth, V.; Lippmann, C.; Lisa, M. A.; Ljunggren, H. M.; Lodato, D. F.; Loenne, P. I.; Loggins, V. R.; Loginov, V.; Loizides, C.; Lopez, X.; López Torres, E.; Lowe, A.; Lu, X.-G.; Luettig, P.; Lunardon, M.; Luparello, G.; Maevskaya, A.; Mager, M.; Mahajan, S.; Mahmood, S. M.; Maire, A.; Majka, R. D.; Malaev, M.; Maldonado Cervantes, I.; Malinina, L.; Mal'Kevich, D.; Malzacher, P.; Mamonov, A.; Manceau, L.; Manko, V.; Manso, F.; Manzari, V.; Marchisone, M.; Mareš, J.; Margagliotti, G. V.; Margotti, A.; Margutti, J.; Marín, A.; Markert, C.; Marquard, M.; Martashvili, I.; Martin, N. A.; Martin Blanco, J.; Martinengo, P.; Martínez, M. I.; Martínez García, G.; Martinez Pedreira, M.; Martynov, Y.; Mas, A.; Masciocchi, S.; Masera, M.; Masoni, A.; Massacrier, L.; Mastroserio, A.; Matyja, A.; Mayer, C.; Mazer, J.; Mazzoni, M. A.; McDonald, D.; Meddi, F.; Menchaca-Rocha, A.; Meninno, E.; Mercado Pérez, J.; Meres, M.; Miake, Y.; Mieskolainen, M. M.; Mikhaylov, K.; Milano, L.; Milosevic, J.; Minervini, L. M.; Mischke, A.; Mishra, A. N.; Miśkowiec, D.; Mitra, J.; Mitu, C. M.; Mohammadi, N.; Mohanty, B.; Molnar, L.; Montaño Zetina, L.; Montes, E.; Morando, M.; Moreira de Godoy, D. A.; Moreno, L. A. P.; Moretto, S.; Morreale, A.; Morsch, A.; Muccifora, V.; Mudnic, E.; Mühlheim, D.; Muhuri, S.; Mukherjee, M.; Müller, H.; Mulligan, J. D.; Munhoz, M. G.; Murray, S.; Musa, L.; Musinsky, J.; Nandi, B. K.; Nania, R.; Nappi, E.; Naru, M. U.; Nattrass, C.; Nayak, K.; Nayak, T. K.; Nazarenko, S.; Nedosekin, A.; Nellen, L.; Ng, F.; Nicassio, M.; Niculescu, M.; Niedziela, J.; Nielsen, B. S.; Nikolaev, S.; Nikulin, S.; Nikulin, V.; Noferini, F.; Nomokonov, P.; Nooren, G.; Norman, J.; Nyanin, A.; Nystrand, J.; Oeschler, H.; Oh, S.; Oh, S. K.; Ohlson, A.; Okatan, A.; Okubo, T.; Olah, L.; Oleniacz, J.; Oliveira da Silva, A. C.; Oliver, M. H.; Onderwaater, J.; Oppedisano, C.; Ortiz Velasquez, A.; Oskarsson, A.; Otwinowski, J.; Oyama, K.; Ozdemir, M.; Pachmayer, Y.; Pagano, P.; Paić, G.; Pajares, C.; Pal, S. K.; Pan, J.; Pandey, A. K.; Pant, D.; Papikyan, V.; Pappalardo, G. S.; Pareek, P.; Park, W. J.; Parmar, S.; Passfeld, A.; Paticchio, V.; Paul, B.; Pawlak, T.; Peitzmann, T.; Pereira da Costa, H.; Pereira de Oliveira Filho, E.; Peresunko, D.; Pérez Lara, C. E.; Peskov, V.; Pestov, Y.; Petráček, V.; Petrov, V.; Petrovici, M.; Petta, C.; Piano, S.; Pikna, M.; Pillot, P.; Pinazza, O.; Pinsky, L.; Piyarathna, D. B.; Płoskoń, M.; Planinic, M.; Pluta, J.; Pochybova, S.; Podesta-Lerma, P. L. M.; Poghosyan, M. G.; Polichtchouk, B.; Poljak, N.; Poonsawat, W.; Pop, A.; Porteboeuf-Houssais, S.; Porter, J.; Pospisil, J.; Prasad, S. K.; Preghenella, R.; Prino, F.; Pruneau, C. A.; Pshenichnov, I.; Puccio, M.; Puddu, G.; Pujahari, P.; Punin, V.; Putschke, J.; Qvigstad, H.; Rachevski, A.; Raha, S.; Rajput, S.; Rak, J.; Rakotozafindrabe, A.; Ramello, L.; Raniwala, R.; Raniwala, S.; Räsänen, S. S.; Rascanu, B. T.; Rathee, D.; Razazi, V.; Read, K. F.; Real, J. S.; Redlich, K.; Reed, R. J.; Rehman, A.; Reichelt, P.; Reicher, M.; Reidt, F.; Ren, X.; Renfordt, R.; Reolon, A. R.; Reshetin, A.; Rettig, F.; Revol, J.-P.; Reygers, K.; Riabov, V.; Ricci, R. A.; Richert, T.; Richter, M.; Riedler, P.; Riegler, W.; Riggi, F.; Ristea, C.; Rivetti, A.; Rocco, E.; Rodríguez Cahuantzi, M.; Rodriguez Manso, A.; Røed, K.; Rogochaya, E.; Rohr, D.; Röhrich, D.; Romita, R.; Ronchetti, F.; Ronflette, L.; Rosnet, P.; Rossi, A.; Roukoutakis, F.; Roy, A.; Roy, C.; Roy, P.; Rubio Montero, A. J.; Rui, R.; Russo, R.; Ryabinkin, E.; Ryabov, Y.; Rybicki, A.; Sadovsky, S.; Šafařík, K.; Sahlmuller, B.; Sahoo, P.; Sahoo, R.; Sahoo, S.; Sahu, P. K.; Saini, J.; Sakai, S.; Saleh, M. A.; Salgado, C. A.; Salzwedel, J.; Sambyal, S.; Samsonov, V.; Sanchez Castro, X.; Šándor, L.; Sandoval, A.; Sano, M.; Santagati, G.; Sarkar, D.; Scapparone, E.; Scarlassara, F.; Scharenberg, R. P.; Schiaua, C.; Schicker, R.; Schmidt, C.; Schmidt, H. R.; Schuchmann, S.; Schukraft, J.; Schulc, M.; Schuster, T.; Schutz, Y.; Schwarz, K.; Schweda, K.; Scioli, G.; Scomparin, E.; Scott, R.; Seeder, K. S.; Seger, J. E.; Sekiguchi, Y.; Selyuzhenkov, I.; Senosi, K.; Seo, J.; Serradilla, E.; Sevcenco, A.; Shabanov, A.; Shabetai, A.; Shadura, O.; Shahoyan, R.; Shangaraev, A.; Sharma, A.; Sharma, M.; Sharma, N.; Shigaki, K.; Shtejer, K.; Sibiriak, Y.; Siddhanta, S.; Sielewicz, K. M.; Siemiarczuk, T.; Silvermyr, D.; Silvestre, C.; Simatovic, G.; Simonetti, G.; Singaraju, R.; Singh, R.; Singha, S.; Singhal, V.; Sinha, B. C.; Sinha, T.; Sitar, B.; Sitta, M.; Skaali, T. B.; Slupecki, M.; Smirnov, N.; Snellings, R. J. M.; Snellman, T. W.; Søgaard, C.; Soltz, R.; Song, J.; Song, M.; Song, Z.; Soramel, F.; Sorensen, S.; Spacek, M.; Spiriti, E.; Sputowska, I.; Spyropoulou-Stassinaki, M.; Srivastava, B. K.; Stachel, J.; Stan, I.; Stefanek, G.; Steinpreis, M.; Stenlund, E.; Steyn, G.; Stiller, J. H.; Stocco, D.; Strmen, P.; Suaide, A. A. P.; Sugitate, T.; Suire, C.; Suleymanov, M.; Sultanov, R.; Šumbera, M.; Symons, T. J. M.; Szabo, A.; Szanto de Toledo, A.; Szarka, I.; Szczepankiewicz, A.; Szymanski, M.; Takahashi, J.; Tanaka, N.; Tangaro, M. A.; Tapia Takaki, J. D.; Tarantola Peloni, A.; Tariq, M.; Tarzila, M. G.; Tauro, A.; Tejeda Muñoz, G.; Telesca, A.; Terasaki, K.; Terrevoli, C.; Teyssier, B.; Thäder, J.; Thomas, D.; Tieulent, R.; Timmins, A. R.; Toia, A.; Trogolo, S.; Trubnikov, V.; Trzaska, W. H.; Tsuji, T.; Tumkin, A.; Turrisi, R.; Tveter, T. S.; Ullaland, K.; Uras, A.; Usai, G. L.; Utrobicic, A.; Vajzer, M.; Vala, M.; Valencia Palomo, L.; Vallero, S.; van der Maarel, J.; van Hoorne, J. W.; van Leeuwen, M.; Vanat, T.; Vande Vyvre, P.; Varga, D.; Vargas, A.; Vargyas, M.; Varma, R.; Vasileiou, M.; Vasiliev, A.; Vauthier, A.; Vechernin, V.; Veen, A. M.; Veldhoen, M.; Velure, A.; Venaruzzo, M.; Vercellin, E.; Vergara Limón, S.; Vernet, R.; Verweij, M.; Vickovic, L.; Viesti, G.; Viinikainen, J.; Vilakazi, Z.; Villalobos Baillie, O.; Villatoro Tello, A.; Vinogradov, A.; Vinogradov, L.; Vinogradov, Y.; Virgili, T.; Vislavicius, V.; Viyogi, Y. P.; Vodopyanov, A.; Völkl, M. A.; Voloshin, K.; Voloshin, S. A.; Volpe, G.; von Haller, B.; Vorobyev, I.; Vranic, D.; Vrláková, J.; Vulpescu, B.; Vyushin, A.; Wagner, B.; Wagner, J.; Wang, H.; Wang, M.; Wang, Y.; Watanabe, D.; Weber, M.; Weber, S. G.; Wessels, J. P.; Westerhoff, U.; Wiechula, J.; Wikne, J.; Wilde, M.; Wilk, G.; Wilkinson, J.; Williams, M. C. S.; Windelband, B.; Winn, M.; Yaldo, C. G.; Yamaguchi, Y.; Yang, H.; Yang, P.; Yano, S.; Yasnopolskiy, S.; Yin, Z.; Yokoyama, H.; Yoo, I.-K.; Yurchenko, V.; Yushmanov, I.; Zaborowska, A.; Zaccolo, V.; Zaman, A.; Zampolli, C.; Zanoli, H. J. C.; Zaporozhets, S.; Zarochentsev, A.; Závada, P.; Zaviyalov, N.; Zbroszczyk, H.; Zgura, I. S.; Zhalov, M.; Zhang, H.; Zhang, X.; Zhang, Y.; Zhao, C.; Zhigareva, N.; Zhou, D.; Zhou, Y.; Zhou, Z.; Zhu, H.; Zhu, J.; Zhu, X.; Zichichi, A.; Zimmermann, A.; Zimmermann, M. B.; Zinovjev, G.; Zyzak, M.

2015-10-01

The measurement of the mass differences for systems bound by the strong force has reached a very high precision with protons and anti-protons. The extension of such measurement from (anti-)baryons to (anti-)nuclei allows one to probe any difference in the interactions between nucleons and anti-nucleons encoded in the (anti-)nuclei masses. This force is a remnant of the underlying strong interaction among quarks and gluons and can be described by effective theories, but cannot yet be directly derived from quantum chromodynamics. Here we report a measurement of the difference between the ratios of the mass and charge of deuterons (d) and anti-deuterons (), and 3He and nuclei carried out with the ALICE (A Large Ion Collider Experiment) detector in Pb-Pb collisions at a centre-of-mass energy per nucleon pair of 2.76 TeV. Our direct measurement of the mass-over-charge differences confirms CPT invariance to an unprecedented precision in the sector of light nuclei. This fundamental symmetry of nature, which exchanges particles with anti-particles, implies that all physics laws are the same under the simultaneous reversal of charge(s) (charge conjugation C), reflection of spatial coordinates (parity transformation P) and time inversion (T).

Precision measurement of the mass difference between light nuclei and anti-nuclei

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adam, J.

The measurement of the mass differences for systems bound by the strong force has reached a very high precision with protons and anti-protons. The extension of such measurement from (anti-)baryons to (anti-)nuclei allows one to probe any difference in the interactions between nucleons and anti-nucleons encoded in the (anti-)nuclei masses. Also, this force is a remnant of the underlying strong interaction among quarks and gluons and can be described by effective theories, but cannot yet be directly derived from quantum chromodynamics. Here we report a measurement of the difference between the ratios of the mass and charge of deuterons (d) and anti-deuterons (more » $$-\\atop{d}$$), and 3He and 3$$-\\atop{He}$$nuclei carried out with the ALICE (A Large Ion Collider Experiment) detector in Pb–Pb collisions at a centre-of-mass energy per nucleon pair of 2.76 TeV. Our direct measurement of the mass-over-charge differences confirms CPT invariance to an unprecedented precision in the sector of light nuclei. This fundamental symmetry of nature, which exchanges particles with anti-particles, implies that all physics laws are the same under the simultaneous reversal of charge(s) (charge conjugation C), reflection of spatial coordinates (parity transformation P) and time inversion (T).« less

Precision measurement of the mass difference between light nuclei and anti-nuclei

DOE PAGES

Adam, J.

2015-08-17

The measurement of the mass differences for systems bound by the strong force has reached a very high precision with protons and anti-protons. The extension of such measurement from (anti-)baryons to (anti-)nuclei allows one to probe any difference in the interactions between nucleons and anti-nucleons encoded in the (anti-)nuclei masses. Also, this force is a remnant of the underlying strong interaction among quarks and gluons and can be described by effective theories, but cannot yet be directly derived from quantum chromodynamics. Here we report a measurement of the difference between the ratios of the mass and charge of deuterons (d) and anti-deuterons (more » $$-\\atop{d}$$), and 3He and 3$$-\\atop{He}$$nuclei carried out with the ALICE (A Large Ion Collider Experiment) detector in Pb–Pb collisions at a centre-of-mass energy per nucleon pair of 2.76 TeV. Our direct measurement of the mass-over-charge differences confirms CPT invariance to an unprecedented precision in the sector of light nuclei. This fundamental symmetry of nature, which exchanges particles with anti-particles, implies that all physics laws are the same under the simultaneous reversal of charge(s) (charge conjugation C), reflection of spatial coordinates (parity transformation P) and time inversion (T).« less

Civilian law: from occupational medicine to occupational event.

PubMed

Mpotos, N; Watelet, J B

Civilian law:from occupational medicine to occupational event. Despite the growing importance of objective measurements, the health effects of many occupational risk factors are currently not fully quantified. Occupational noise, as a widespread risk factor, is illustrative in this regard; there is a strong body of evidence linking it to an important health outcome (hearing loss), but it is less decisively associated with others (such as psychological disorders). It is also distinct from environmental noise, and therefore falls under the responsibility of employers as well as individuals. Noise-induced hearing loss (NIHL) is, at present, incurable and irreversible. However, it is preventable, if effective and global hearing conservation programmes can be implemented. These programmes should not be isolated efforts, but should be integrated into the overall hazard prevention and control programme of the workplace. Belgian law encompasses a set of provisions for prevention and the protection of the health and safety of workers within the workplace, including aspects pertaining to the hygiene of the workplace and psychosocial aspects at work (stress, violence, bullying and sexual harassment, among others). In principle, combating environmental noise is fully addressed in this country. However, other levels of policy-making also play an important role in this regard. For example, the federal government is in charge of product standards, and therefore also of noise emission standards for products. The interpretation and enforcement of Belgian legislation on well-being at work converts European directives and international agreements on well-being at work into Belgian law.

The lightness of being: mass, ether, and unification of the forces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kronfeld, Andreas S.

2009-03-01

How can an electron be both a wave and a particle? At the same time? Because it is a quantum field. That key insight seems to be underappreciated, given the awe and mysticism that permeate most nontechnical discussions of modern physics. Perhaps the root of the problem is that most popularizations of quantum mechanics and of particle physics shy away from quantized fields, the natural language for microscopic phenomena. In 'The Lightness of Being: Mass, Ether, and the Unification of Forces', Frank Wilczek confronts quantum field theory head on, demystifying not only wave-particle duality but also the origin of massmore » for hadrons (that is, everyday matter). Wilczek is the Herman Feshbach Professor of Physics at MIT and a co-recipient of the 2004 Nobel Prize in Physics. His research has spanned almost all aspects of theoretical particle physics, with significant forays into condensed-matter physics and dense nuclear matter (condensed quark matter, one might say). Recurring themes are the richness of quantum chromodynamics (QCD) and the alluring ideas of unification. His breadth and depth make him a sought after speaker for colloquia and public lectures. Wilczek also contributes an occasional Reference Frame column to 'Physics Today'. The material in 'The Lightness of Being' reflects the scope of the author's research. The book consists of three parts: the quantum fields of QCD (the ether that makes mass), gravitation (the ether that feels mass), and unification. Part 1, which traces notions of mass from Isaac Newton's time through theoretical and computational results of the past 40 years, is the most substantial and original; it is rich, modern, and rooted in observed phenomena. Part 2 continues in the same vein as it connects gravity, also an observed phenomenon, to QCD. Part 3 is more conventional, for a popularization of particle physics, in its focus on speculative ideas that (still) await direct experimental tests. Readers of 'Physics Today' will know

PFP Emergency Lighting Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

BUSCH, M.S.

2000-02-02

NFPA 101, section 5-9 mandates that, where required by building classification, all designated emergency egress routes be provided with adequate emergency lighting in the event of a normal lighting outage. Emergency lighting is to be arranged so that egress routes are illuminated to an average of 1.0 footcandle with a minimum at any point of 0.1 footcandle, as measured at floor level. These levels are permitted to drop to 60% of their original value over the required 90 minute emergency lighting duration after a power outage. The Plutonium Finishing Plant (PFP) has two designations for battery powered egress lights ''Emergencymore » Lights'' are those battery powered lights required by NFPA 101 to provide lighting along officially designated egress routes in those buildings meeting the correct occupancy requirements. Emergency Lights are maintained on a monthly basis by procedure ZSR-12N-001. ''Backup Lights'' are battery powered lights not required by NFPA, but installed in areas where additional light may be needed. The Backup Light locations were identified by PFP Safety and Engineering based on several factors. (1) General occupancy and type of work in the area. Areas occupied briefly during a shiftly surveillance do not require backup lighting while a room occupied fairly frequently or for significant lengths of time will need one or two Backup lights to provide general illumination of the egress points. (2) Complexity of the egress routes. Office spaces with a standard hallway/room configuration will not require Backup Lights while a large room with several subdivisions or irregularly placed rooms, doors, and equipment will require Backup Lights to make egress safer. (3) Reasonable balance between the safety benefits of additional lighting and the man-hours/exposure required for periodic light maintenance. In some plant areas such as building 236-Z, the additional maintenance time and risk of contamination do not warrant having Backup Lights installed in

The impact of occupational stress factors on temporary work disability related to arterial hypertension and its complications.

PubMed

Lazaridis, Konstantinos; Jovanović, Jovica; Jovanović, Jovana; Šarac, Ivana; Jovanović, Stefan

2017-06-01

To determine which specific groups of occupational stress factors influence the duration of temporary work disability related to arterial hypertension and joint complications/co-morbidities. Workers (n = 1398; 1009 in the exposed group, 389 in the control group) with arterial hypertension who worked at one workplace for a minimum of 10 years were divided into 10 subgroups, depending on the presence of joint complications/co-morbidities. The intensity of seven groups of occupational stress factors, the total score of Occupational Stress Index (OSI) and the average number of lost working days during 1 year were analysed. The number of lost working days due to arterial hypertension and joint complications/co-morbidities was significantly higher in the exposed group. In all subgroups of the exposed group there was a high correlation between the number of lost working days and the total OSI score. Specific occupational stress factors were associated with specific complications: High Demands with chronic myocardial infarction, Strictness with cerebral haemorrhage, Conflict/Uncertainty with cerebral infarction, Extrinsic Time Pressure with acute myocardial infarction, and Avoidance/Symbolic Aversiveness with non-insulin-dependent diabetes. There are specific groups of occupational stress factors which can influence the duration of work disability associated with certain complications and co-morbidities of arterial hypertension.

Coronal mass ejection kinematics deduced from white light (Solar Mass Ejection Imager) and radio (Wind/WAVES) observations

NASA Astrophysics Data System (ADS)

Reiner, M. J.; Jackson, B. V.; Webb, D. F.; Mizuno, D. R.; Kaiser, M. L.; Bougeret, J.-L.

2005-09-01

White-light and radio observations are combined to deduce the coronal and interplanetary kinematics of a fast coronal mass ejection (CME) that was ejected from the Sun at about 1700 UT on 2 November 2003. The CME, which was associated with an X8.3 solar flare from W56°, was observed by the Mauna Loa and Solar and Heliospheric Observatory (SOHO) Large-Angle Spectrometric Coronograph (LASCO) coronagraphs to 14 R⊙. The measured plane-of-sky speed of the LASCO CME was 2600 km s-1. To deduce the kinematics of this CME, we use the plane-of-sky white light observations from both the Solar Mass Ejection Imager (SMEI) all-sky camera on board the Coriolis spacecraft and the SOHO/LASCO coronagraph, as well as the frequency drift rate of the low-frequency radio data and the results of the radio direction-finding analysis from the WAVES experiment on the Wind spacecraft. In agreement with the in situ observations for this event, we find that both the white light and radio observations indicate that the CME must have decelerated significantly beginning near the Sun and continuing well into the interplanetary medium. More specifically, by requiring self-consistency of all the available remote and in situ data, together with a simple, but not unreasonable, assumption about the general characteristic of the CME deceleration, we were able to deduce the radial speed and distance time profiles for this CME as it propagated from the Sun to 1 AU. The technique presented here, which is applicable to mutual SMEI/WAVES CME events, is expected to provide a more complete description and better quantitative understanding of how CMEs propagate through interplanetary space, as well as how the radio emissions, generated by propagating CME/shocks, relate to the shock and CME. This understanding can potentially lead to more accurate predictions for the onset times of space weather events, such as those that were observed during this unique period of intense solar activity.

Modeling Nearly Spherical Pure-bulge Galaxies with a Stellar Mass-to-light Ratio Gradient under the ΛCDM and MOND Paradigms. I. Methodology, Dynamical Stellar Mass, and Fundamental Mass Plane

NASA Astrophysics Data System (ADS)

Chae, Kyu-Hyun; Bernardi, Mariangela; Sheth, Ravi K.

2018-06-01

We carry out spherical Jeans modeling of nearly round pure-bulge galaxies selected from the ATLAS3D sample. Our modeling allows for gradients in the stellar mass-to-light ratio (M ⋆/L) through analytic prescriptions parameterized with a “gradient strength” K introduced to accommodate any viable gradient. We use a generalized Osipkov–Merritt model for the velocity dispersion (VD) anisotropy. We produce Monte Carlo sets of models based on the stellar VD profiles under both the ΛCDM and MOND paradigms. Here, we describe the galaxy data, the empirical inputs, and the modeling procedures of obtaining the Monte Carlo sets. We then present the projected dynamical stellar mass, {M}\\star {{e}}, within the effective radius R e, and the fundamental mass plane (FMP) as a function of K. We find the scaling of the K-dependent mass with respect to the ATLAS3D reported mass as: {log}}10[{M}\\star {{e}}(K)/{M}\\star {{e}}{{A}3{{D}}}]=a\\prime +b\\prime K with a‧ = ‑0.019 ± 0.012 and b‧ = ‑0.18 ± 0.02 (ΛCDM), or a‧ = ‑0.023 ± 0.014 and b‧ = ‑0.23 ± 0.03 (MOND), for 0 ≤ K < 1.5. The FMP has coefficients consistent with the virial expectation and only the zero-point scales with K. The median value of K for the ATLAS3D galaxies is < K> ={0.53}-0.04+0.05. We perform a similar analysis of the much larger SDSS DR7 spectroscopic sample. In this case, only the VD within a single aperture is available, so we impose the additional requirement that the VD slope be similar to that in the ATLAS3D galaxies. Our analysis of the SDSS galaxies suggests a positive correlation of K with stellar mass.

Innovative Approaches to Health Occupations Education.

ERIC Educational Resources Information Center

Gurney, Elizabeth, Comp.; Kintgen, Jean, Comp.

To improve communications between health occupations educators and health professionals about developments in health occupations education, a compilation of 21 approaches used in health occupations education is presented. Outlines of the 21 different courses are presented, grouped in eight areas: (1) career mobility--modified LPN program for…

Human rights in occupational therapy education: A step towards a more occupationally just global society.

PubMed

Crawford, Emma; Aplin, Tammy; Rodger, Sylvia

2017-04-01

Education on human rights will place occupational therapists in a strong position to address societal inequities that limit occupational engagement for many client groups. The imminent changes to the Minimum Standard for the Education of Occupational Therapists engender efforts towards social change and will require university-level human rights education. This education might enhance the profession's influence on disadvantaging social structures in order to effect social change. To contribute to the evidence base for social change education in occupational therapy, this research aims to understand the knowledge, skills, confidence and learning experiences of occupational therapy students who completed a human rights course. Final year occupational therapy students responded to questionnaires which included listing human rights, a human rights scale measuring knowledge and confidence for working towards human rights, and open questions. Numbers of rights listed, knowledge scores and confidence scores were calculated. Responses to the open questions were thematically analysed. After completing a human rights course, students had good knowledge and moderate confidence to work with human rights. Three themes were identified including 'learning about human rights', 'learning about structural, societal and global perspectives on occupational engagement' and 'learning how occupational therapists can work with groups, communities and populations: becoming articulate and empowered'. Human rights education fosters the development of occupational therapists who are skilled, knowledgeable, confident and empowered to address occupational injustices, according to these research findings. To develop a more occupationally just global society, education that considers iniquitous social structures and human rights is necessary. © 2016 Occupational Therapy Australia.

The XMM Cluster Survey: the halo occupation number of BOSS galaxies in X-ray clusters

NASA Astrophysics Data System (ADS)

Mehrtens, Nicola; Romer, A. Kathy; Nichol, Robert C.; Collins, Chris A.; Sahlén, Martin; Rooney, Philip J.; Mayers, Julian A.; Bermeo-Hernandez, A.; Bristow, Martyn; Capozzi, Diego; Christodoulou, L.; Comparat, Johan; Hilton, Matt; Hoyle, Ben; Kay, Scott T.; Liddle, Andrew R.; Mann, Robert G.; Masters, Karen; Miller, Christopher J.; Parejko, John K.; Prada, Francisco; Ross, Ashley J.; Schneider, Donald P.; Stott, John P.; Streblyanska, Alina; Viana, Pedro T. P.; White, Martin; Wilcox, Harry; Zehavi, Idit

2016-12-01

We present a direct measurement of the mean halo occupation distribution (HOD) of galaxies taken from the eleventh data release (DR11) of the Sloan Digital Sky Survey-III Baryon Oscillation Spectroscopic Survey (BOSS). The HOD of BOSS low-redshift (LOWZ: 0.2 < z < 0.4) and Constant-Mass (CMASS: 0.43 < z < 0.7) galaxies is inferred via their association with the dark matter haloes of 174 X-ray-selected galaxy clusters drawn from the XMM Cluster Survey (XCS). Halo masses are determined for each galaxy cluster based on X-ray temperature measurements, and range between log10(M180/M⊙) = 13 and 15. Our directly measured HODs are consistent with the HOD-model fits inferred via the galaxy-clustering analyses of Parejko et al. for the BOSS LOWZ sample and White et al. for the BOSS CMASS sample. Under the simplifying assumption that the other parameters that describe the HOD hold the values measured by these authors, we have determined a best-fitting alpha-index of 0.91 ± 0.08 and 1.27^{+0.03}_{-0.04} for the CMASS and LOWZ HOD, respectively. These alpha-index values are consistent with those measured by White et al. and Parejko et al. In summary, our study provides independent support for the HOD models assumed during the development of the BOSS mock-galaxy catalogues that have subsequently been used to derive BOSS cosmological constraints.

[Some aspects regarding occupational health in small and middle enterprises].

PubMed

Bîclea, Carmen; Silion, I

2010-01-01

The objective of the study was to assess occupational health services in small and medium enterprises (SME's) in Bacău, between 2007 and 2008, in order to increase the quality of services' management. Five hundred seventy nine SME's with 21,815 employees have been studied, with a number of employees varying from ten to 250 per enterprise. About 4478 employees, out of which 587 with different occupational exposures, have no occupational health services provided on a contract basis. The high number of occupational diseases and work related accidents in SME's show a low level of concern for occupational health and safety matters, compared to big enterprises. The employees' opinions showed that the role of occupational health is not known, there is no concern for the medical adaptation of new employees or old employees rehired after a long break, the employees do not consult occupational health services on their own accord. The occupational services do not fully satisfy the need. The study offers useful data to physicians and SME's management in order to improve the occupational health management.

An overview of the characterization of occupational exposure to nanoaerosols in workplaces

NASA Astrophysics Data System (ADS)

Castellano, Paola; Ferrante, Riccardo; Curini, Roberta; Canepari, Silvia

2009-05-01

Currently, there is a lack of standardized sampling and metric methods that can be applied to measure the level of exposure to nanosized aerosols. Therefore, any attempt to characterize exposure to nanoparticles (NP) in a workplace must involve a multifaceted approach characterized by different sampling and analytical techniques to measure all relevant characteristics of NP exposure. Furthermore, as NP aerosols are always complex mixtures of multiple origins, sampling and analytical methods need to be improved to selectively evaluate the apportionment from specific sources to the final nanomaterials. An open question at the world's level is how to relate specific toxic effects of NP with one or more among several different parameters (such as particle size, mass, composition, surface area, number concentration, aggregation or agglomeration state, water solubility and surface chemistry). As the evaluation of occupational exposure to NP in workplaces needs dimensional and chemical characterization, the main problem is the choice of the sampling and dimensional separation techniques. Therefore a convenient approach to allow a satisfactory risk assessment could be the contemporary use of different sampling and measuring techniques for particles with known toxicity in selected workplaces. Despite the lack of specific NP exposure limit values, exposure metrics, appropriate to nanoaerosols, are discussed in the Technical Report ISO/TR 27628:2007 with the aim to enable occupational hygienists to characterize and monitor nanoaerosols in workplaces. Moreover, NIOSH has developed the Document Approaches to Safe Nanotechnology (intended to be an information exchange with NIOSH) in order to address current and future research needs to understanding the potential risks that nanotechnology may have to workers.

[The path to customized prosthesis: role of the occupational therapist in the recovery of autonomy].

PubMed

Fogliaresi, Stefania; Mulè, Chiara; Borboni, Alberto; Taveggia, Giovanni

2015-01-01

The aim of the rehabilitative treatment of the amputee is to facilitate the reintegration of the patient into daily life: within social, family, and working contexts. Occupational therapy relates to 'doing', to everyday life. These are the activities carried out by individuals during daily life: catching the bus, driving a car, cooking a meal, playing cards or changing a light bulb. During the process of rehabilitation of the amputee the occupational therapist must evaluate the residual capacities of the patient, discover their needs and requirements so as to develop suitable rehabilitative strategiesfor retraining motor-skills, acceptance of the new living conditions, and social reintegration.

Lighting the Way to Mars

NASA Technical Reports Server (NTRS)

Barnwell, Payton L.

2017-01-01

Transforming the Martian atmosphere into something suitable for plant life would require a scientific feat that we currently do not possess the means to achieve, but indoor agriculture with LEDs could be just the alternative. Previous research has shown that light recipes provided by LEDs can alter the growth and nutrition of a plant based on wavelengths emitted, and crops grown in space aboard the International Space Station would respond similarly. By testing various LED light recipes such as ratios of red, green, blue (RGB) wavelengths, along with white (W) and far red (FR) on flight approved crops, harvest data were analyzed for trends to determine best light conditions for plant growth. Crops of Outredgeous Lettuce, Tokyo Bekana Chinese cabbage, and Mizuna were grown for 28 days with harvests on 14, 21, and 28 days after planting. By collecting fresh mass, shoot dimensions, chlorophyll estimates, leaf areanumber, and dry mass, the overall differences per light treatment were compared. For Outredgeous lettuce, a recipe of W+FR LEDs yielded increases in biomass and size compared to RB LEDs alone. However, the RB recipe resulted in smaller plants with higher concentrations in phytonutrients. Overall, the RGB + FR treatment with ratios similar to sunlight provided a promising balance of optimized biomass, size, and nutrient content. The Chinese cabbage, which was grown under various ratios of W and B light, showed no differences between recipes, and exhibited similar physiological responses regardless of the light recipes that were tested. The Mizuna studies are still ongoing. Crops for ISS chambers and astronaut consumption are targeted based on biomass, physiology, and for human psychological benefit. The goal of this research is to provide light recipe recommendations for space crops that have been thoroughly tested on the ground. These results will serve a major benefit for astronauts growing crops in the Advanced Plant Habitat currently in orbit aboard the

Orientation to Health Occupations: Curriculum Guide for Health Occupations, Phase 2.

ERIC Educational Resources Information Center

Benedict, Mary; And Others

The document outlines a curriculum designed to teach appropriate nursing skills to students and to prepare them for career opportunities available in health occupations. It is presented in 10 units offering basic information under the headings of: overview of health occupations; communications; medical terminology; fundamental principles of human…

The Roles of Occupational Knowledge and Vocational Self-Concept Crystallization in Students' School-to-Work Transition.

ERIC Educational Resources Information Center

Taylor, M. Susan

1985-01-01

Examined predictors of college students' school-to-work transition difficulty, level of occupational knowledge, and crystallization of vocational self-concept. Occupational knowledge predicted whether students received at least one job offer before graduation and the total number of offers. Self-concept crystallization predicted at least one…

LIGHT CURVES OF CORE-COLLAPSE SUPERNOVAE WITH SUBSTANTIAL MASS LOSS USING THE NEW OPEN-SOURCE SUPERNOVA EXPLOSION CODE (SNEC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morozova, Viktoriya; Renzo, Mathieu; Ott, Christian D.

We present the SuperNova Explosion Code (SNEC), an open-source Lagrangian code for the hydrodynamics and equilibrium-diffusion radiation transport in the expanding envelopes of supernovae. Given a model of a progenitor star, an explosion energy, and an amount and distribution of radioactive nickel, SNEC generates the bolometric light curve, as well as the light curves in different broad bands assuming blackbody emission. As a first application of SNEC, we consider the explosions of a grid of 15 M{sub ⊙} (at zero-age main sequence, ZAMS) stars whose hydrogen envelopes are stripped to different extents and at different points in their evolution. Themore » resulting light curves exhibit plateaus with durations of ∼20–100 days if ≳1.5–2 M{sub ⊙} of hydrogen-rich material is left and no plateau if less hydrogen-rich material is left. If these shorter plateau lengths are not seen for SNe IIP in nature, it suggests that, at least for ZAMS masses ≲20 M{sub ⊙}, hydrogen mass loss occurs as an all or nothing process. This perhaps points to the important role binary interactions play in generating the observed mass-stripped supernovae (i.e., Type Ib/c events). These light curves are also unlike what is typically seen for SNe IIL, arguing that simply varying the amount of mass loss cannot explain these events. The most stripped models begin to show double-peaked light curves similar to what is often seen for SNe IIb, confirming previous work that these supernovae can come from progenitors that have a small amount of hydrogen and a radius of ∼500 R{sub ⊙}.« less

Supersymmetry across the light and heavy-light hadronic spectrum. II.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dosch, Hans Gunter; de Téramond, Guy F.; Brodsky, Stanley J.

We extend our analysis of the implications of hadronic supersymmetry for heavy-light hadrons in light-front holographic QCD. Although conformal symmetry is strongly broken by the heavy quark mass, supersymmetry and the holographic embedding of semiclassical light-front dynamics derived from five-dimensional anti-de Sitter space nevertheless determine the form of the confining potential in the light-front Hamiltonian to be harmonic. The resulting light-front bound-state equations lead to a heavy-light Regge-like spectrum for both mesons and baryons. The confinement hadron mass scale and their Regge slopes depend, however, on the mass of the heavy quark in the meson or baryon as expected frommore » heavy quark effective theory. Furthermore, this procedure reproduces the observed spectra of heavy-light hadrons with good precision and makes predictions for yet unobserved states.« less

Supersymmetry across the light and heavy-light hadronic spectrum. II.

DOE PAGES

Dosch, Hans Gunter; de Téramond, Guy F.; Brodsky, Stanley J.

2017-02-15

We extend our analysis of the implications of hadronic supersymmetry for heavy-light hadrons in light-front holographic QCD. Although conformal symmetry is strongly broken by the heavy quark mass, supersymmetry and the holographic embedding of semiclassical light-front dynamics derived from five-dimensional anti-de Sitter space nevertheless determine the form of the confining potential in the light-front Hamiltonian to be harmonic. The resulting light-front bound-state equations lead to a heavy-light Regge-like spectrum for both mesons and baryons. The confinement hadron mass scale and their Regge slopes depend, however, on the mass of the heavy quark in the meson or baryon as expected frommore » heavy quark effective theory. Furthermore, this procedure reproduces the observed spectra of heavy-light hadrons with good precision and makes predictions for yet unobserved states.« less

Traffic safety facts 1993 : occupant protection

DOT National Transportation Integrated Search

1994-01-01

In 1993, 26,873 front-seat occupants of passenger vehicles (cars, light trucks, vans, and utility vehicles) were killed in motor vehicle traffic crashes, 67 percent of the 40,115 traffic fatalities reported for the year. Among front-seat passenger ve...

Extension of the BRYNTRN code to monoenergetic light ion beams

NASA Technical Reports Server (NTRS)

Cucinotta, Francis A.; Wilson, John W.; Badavi, Francis F.

1994-01-01

A monoenergetic version of the BRYNTRN transport code is extended to beam transport of light ions (H-2, H-3, He-3, and He-4) in shielding materials (thick targets). The redistribution of energy in nuclear reactions is included in transport solutions that use nuclear fragmentation models. We also consider an equilibrium target-fragment spectrum for nuclei with mass number greater than four to include target fragmentation effects in the linear energy transfer (LET) spectrum. Illustrative results for water and aluminum shielding, including energy and LET spectra, are discussed for high-energy beams of H-2 and He-4.

Barriers to Occupational Achievement.

ERIC Educational Resources Information Center

Gurman, Ernest B.

The under-representation of women in prestigious occupations and the lower average pay women earn has been of concern for many years. This study investigated two alternative explanations for this under-representation of females in prestigious and higher paying occupations. The first explanation was external barriers such as discrimination, and the…

The Australian Work Exposures Study: prevalence of occupational exposure to diesel engine exhaust.

PubMed

Peters, Susan; Carey, Renee N; Driscoll, Timothy R; Glass, Deborah C; Benke, Geza; Reid, Alison; Fritschi, Lin

2015-06-01

Diesel engines are widely used in occupational settings. Diesel exhaust has been classified as a lung carcinogen, but data on number of workers exposed to different levels of diesel exhaust are not available in Australia. The aim of this study was to estimate the current prevalence of exposure to diesel engine exhaust in Australian workplaces. A cross-sectional survey of Australian males and females (18-65 years old) in current paid employment was undertaken. Information about the respondents' current job and various demographic factors was collected in a telephone interview using the web-based tool OccIDEAS. Semi-quantitative occupational exposure levels to diesel exhaust were assigned using programmed decision rules and numbers of workers exposed in Australia in 2011 were estimated. We defined substantial exposure as exposed at a medium or high level, for at least 5h per week. Substantial occupational exposure to diesel exhaust was experienced by 13.4% of the respondents in their current job. Exposure prevalence varied across states, ranging from 6.4% in the Australian Capital Territory to 17.0% in Western Australia. Exposures occurred mainly in the agricultural, mining, transport and construction industries, and among mechanics. Men (20.4%) were more often exposed than women (4.7%). Extrapolation to the total working population indicated that 13.8% (95% confidence interval 10.0-20.4) of the 2011 Australian workforce were estimated to be substantially exposed to diesel exhaust, and 1.8% of the workers were estimated to experience high levels of exposures in their current job. About 1.2 million Australian workers were estimated to have been exposed to diesel exhaust in their workplace in 2011. This is the first study to describe the prevalence of occupational diesel exhaust exposure in Australia and will enable estimation of the number of lung cancers attributable to diesel exhaust exposure in the workplace. © The Author 2015. Published by Oxford University Press

Occupational Listings Arranged by Cluster and Subject Matter Areas.

ERIC Educational Resources Information Center

Schwarz, Otto

Approximately 850 occupations are listed under 27 occupational clusters. The Dictionary of Occupational Title (DOT) number is specified for occupations in the clusters of business training and distributive education, chemistry, general shop and industrial arts, home economics, foreign language, music, social studies, art, agriculture, physics, and…

From Patrick to John F.: Ethnic Names and Occupational Success in the Last Era of Mass Migration

PubMed Central

Goldstein, Joshua R.; Stecklov, Guy

2016-01-01

Taking advantage of historical census records that include full first and last names, we apply a new approach to measuring the effect of cultural assimilation on economic success for the children of the last great wave of immigrants to the United States. We created a quantitative index of ethnic distinctiveness of first names and show the consequences of ethnic-sounding names for the occupational achievement of the adult children of European migrants. We find a consistent tendency for the children of Irish, Italian, German, and Polish immigrants with more “American”-sounding names to have higher occupational achievement. About one-third of this effect appears to be due to social class differences in name-giving, and the remaining two-thirds to signaling effects of the names themselves. An exception is found for Russian, predominantly Jewish, immigrants, where we find a positive effect of ethnic naming on occupational achievement. The divergent effects of our new measure of cultural assimilation, sometimes hurting and sometimes helping, lend historical empirical support to more recent theories of the advantages of different paths to assimilation. The effects of first names are robust to controls for the ethnic recognizability of last names, suggesting that immigrants’ success depended on being perceived as making an effort to assimilate rather than hiding one’s origins. PMID:27594705

Toward Developing a New Occupational Exposure Metric Approach for Characterization of Diesel Aerosols

PubMed Central

Cauda, Emanuele G.; Ku, Bon Ki; Miller, Arthur L.; Barone, Teresa L.

2015-01-01

The extensive use of diesel-powered equipment in mines makes the exposure to diesel aerosols a serious occupational issue. The exposure metric currently used in U.S. underground noncoal mines is based on the measurement of total carbon (TC) and elemental carbon (EC) mass concentration in the air. Recent toxicological evidence suggests that the measurement of mass concentration is not sufficient to correlate ultrafine aerosol exposure with health effects. This urges the evaluation of alternative measurements. In this study, the current exposure metric and two additional metrics, the surface area and the total number concentration, were evaluated by conducting simultaneous measurements of diesel ultrafine aerosols in a laboratory setting. The results showed that the surface area and total number concentration of the particles per unit of mass varied substantially with the engine operating condition. The specific surface area (SSA) and specific number concentration (SNC) normalized with TC varied two and five times, respectively. This implies that miners, whose exposure is measured only as TC, might be exposed to an unknown variable number concentration of diesel particles and commensurate particle surface area. Taken separately, mass, surface area, and number concentration did not completely characterize the aerosols. A comprehensive assessment of diesel aerosol exposure should include all of these elements, but the use of laboratory instruments in underground mines is generally impracticable. The article proposes a new approach to solve this problem. Using SSA and SNC calculated from field-type measurements, the evaluation of additional physical properties can be obtained by using the proposed approach. PMID:26361400

Feasibility of a cohort study on health risks caused by occupational exposure to radiofrequency electromagnetic fields

PubMed Central

2009-01-01

Background The aim of this study was to examine the feasibility of performing a cohort study on health risks from occupational exposure to radiofrequency electromagnetic fields (RF-EMF) in Germany. Methods A set of criteria was developed to evaluate the feasibility of such a cohort study. The criteria aimed at conditions of exposure and exposure assessment (level, duration, preferably on an individual basis), the possibility to assemble a cohort and the feasibility of ascertaining various disease endpoints. Results Twenty occupational settings with workers potentially exposed to RF-EMF and, in addition, a cohort of amateur radio operators were considered. Based on expert ratings, literature reviews and our set of predefined criteria, three of the cohorts were identified as promising for further evaluation: the personnel (technicians) of medium/short wave broadcasting stations, amateur radio operators, and workers on dielectric heat sealers. After further analyses, the cohort of workers on dielectric heat sealers seems not to be feasible due to the small number of exposed workers available and to the difficulty of assessing exposure (exposure depends heavily on the respective working process and mixture of exposures, e.g. plastic vapours), although exposure was highest in this occupational setting. The advantage of the cohort of amateur radio operators was the large number of persons it includes, while the advantage of the cohort of personnel working at broadcasting stations was the quality of retrospective exposure assessment. However, in the cohort of amateur radio operators the exposure assessment was limited, and the cohort of technicians was hampered by the small number of persons working in this profession. Conclusion The majority of occupational groups exposed to RF-EMF are not practicable for setting up an occupational cohort study due to the small numbers of exposed subjects or due to exposure levels being only marginally higher than those of the general

METAL FUSION AND FABRICATION WELDING. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE, NUMBER 6.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE IN A SERIES DESIGNED TO HELP TEACHERS PREPARE POSTSECONDARY STUDENTS FOR THE AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, OR SERVICE SUPERVISORS, THIS GUIDE AIMS TO DEVELOP STUDENT UNDERSTANDING OF WELDING EQUIPMENT AND SUPPLIES, AND ABILITY TO PERFORM SKILLS REQUIRED OF AGRICULTURAL MECHANICS. IT WAS…

An Analysis of the Plumbing Occupation.

ERIC Educational Resources Information Center

Carlton, Earnest L.; Hollar, Charles E.

The occupational analysis contains a brief job description, presenting for the occupation of plumbing 12 detailed task statements which specify job duties (tools, equipment, materials, objects acted upon, performance knowledge, safety considerations/hazards, decisions, cues, and errors) and learning skills (science, mathematics/number systems, and…

Leisure-time physical activity in relation to occupational physical activity among women.

PubMed

Ekenga, Christine C; Parks, Christine G; Wilson, Lauren E; Sandler, Dale P

2015-05-01

The objective of this study is to examine the association between occupational physical activity and leisure-time physical activity among US women in the Sister Study. We conducted a cross-sectional study of 26,334 women who had been employed in their current job for at least 1 year at baseline (2004-2009). Occupational physical activity was self-reported and leisure-time physical activity was estimated in metabolic equivalent hours per week. Log multinomial regression was used to evaluate associations between occupational (sitting, standing, manually active) and leisure-time (insufficient, moderate, high) activity. Models were adjusted for age, race/ethnicity, education, income, geographic region, and body mass index. Only 54% of women met or exceeded minimum recommended levels of leisure-time physical activity (moderate 32% and high 22%). Women who reported sitting (prevalence ratio (PR)=0.82, 95% confidence interval (CI): 0.74-0.92) or standing (PR=0.84, 95% CI: 0.75-0.94) most of the time at work were less likely to meet the requirements for high leisure-time physical activity than manually active workers. Associations were strongest among women living in the Northeast and the South. In this nationwide study, low occupational activity was associated with lower leisure-time physical activity. Women who are not active in the workplace may benefit from strategies to promote leisure-time physical activity. Published by Elsevier Inc.

Leisure-time physical activity in relation to occupational physical activity among women

PubMed Central

Ekenga, Christine C.; Parks, Christine G.; Wilson, Lauren E.; Sandler, Dale P.

2017-01-01

Objective To examine the association between occupational physical activity and leisure-time physical activity among US women in the Sister Study. Methods We conducted a cross-sectional study of 26,334 women who had been employed in their current job for at least 1 year at baseline (2004–2009). Occupational physical activity was self-reported and leisure-time physical activity was estimated in metabolic equivalent hours per week. Log multinomial regression was used to evaluate associations between occupational (sitting, standing, manually active) and leisure-time (insufficient, moderate, high) activity. Models were adjusted for age, race/ethnicity, education, income, geographic region, and body mass index. Results Only 54% of women met or exceeded minimum recommended levels of leisure-time physical activity (moderate 32% and high 22%). Women who reported sitting (PR = 0.82, 95% CI: 0.74–0.92) or standing (PR = 0.84, 95% CI: 0.75–0.94) most of the time at work were less likely to meet the requirements for high leisure-time physical activity than manually active workers. Associations were strongest among women living in the Northeast and the South. Conclusion In this nationwide study, low occupational activity was associated with lower leisure-time physical activity. Women who are not active in the workplace may benefit from strategies to promote leisure-time physical activity. PMID:25773471

Using computer aided case based reasoning to support clinical reasoning in community occupational therapy.

PubMed

Taylor, Bruce; Robertson, David; Wiratunga, Nirmalie; Craw, Susan; Mitchell, Dawn; Stewart, Elaine

2007-08-01

Community occupational therapists have long been involved in the provision of environmental control systems. Diverse electronic technologies with the potential to improve the health and quality of life of selected clients have developed rapidly in recent years. Occupational therapists employ clinical reasoning in order to determine the most appropriate technology to meet the needs of individual clients. This paper describes a number of the drivers that may increase the adoption of information and communication technologies in the occupational therapy profession. It outlines case based reasoning as understood in the domains of expert systems and knowledge management and presents the preliminary results of an ongoing investigation into the potential of a prototype computer aided case based reasoning tool to support the clinical reasoning of community occupational therapists in the process of assisting clients to choose home electronic assistive or smart house technology.

Programs for Occupational Education for Grades 9-12 at Milford, Massachusetts.

ERIC Educational Resources Information Center

Engelhardt, David F.

An occupational education and career education program was planned for the new Milford, Mass. high school in which "occupational education" was defined as stressing training and guidance for occupations requiring no more training than up through the fourteenth year. The program provides for the half-day student and for the 5- or 10-period per week…

Exposure to Stress: Occupational Hazards in Hospitals

MedlinePlus

EXPOSURE TO STRESS Occupational Hazards in Hospitals DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Exposure to Stress Occupational Hazards in Hospitals DEPARTMENT OF HEALTH AND ...

Occupational Pesticide Exposures and Respiratory Health

PubMed Central

Ye, Ming; Beach, Jeremy; Martin, Jonathan W.; Senthilselvan, Ambikaipakan

2013-01-01

Pesticides have been widely used to control pest and pest-related diseases in agriculture, fishery, forestry and the food industry. In this review, we identify a number of respiratory symptoms and diseases that have been associated with occupational pesticide exposures. Impaired lung function has also been observed among people occupationally exposed to pesticides. There was strong evidence for an association between occupational pesticide exposure and asthma, especially in agricultural occupations. In addition, we found suggestive evidence for a link between occupational pesticide exposure and chronic bronchitis or COPD. There was inconclusive evidence for the association between occupational pesticide exposure and lung cancer. Better control of pesticide uses and enforcement of safety behaviors, such as using personal protection equipment (PPE) in the workplace, are critical for reducing the risk of developing pesticide-related symptoms and diseases. Educational training programs focusing on basic safety precautions and proper uses of personal protection equipment (PPE) are possible interventions that could be used to control the respiratory diseases associated with pesticide exposure in occupational setting. PMID:24287863