Problems With Using Patient Retention in the Evaluation of Mental Health Providers: Differences in Type of Dropout.

PubMed

Brown, Halley J; Andreason, Hope; Melling, Amy K; Imel, Zac E; Simon, Gregory E

2015-08-01

Retention, or its opposite, dropout, is a common metric of psychotherapy quality, but using it to assess provider performance can be problematic. Differences among providers in numbers of general dropouts, "good" dropouts (patients report positive treatment experiences and outcome), and "bad" dropouts (patients report negative treatment experiences and outcome) were evaluated. Patient records were paired with satisfaction surveys (N=3,054). Binomial mixed-effects models were used to examine differences among providers by dropout type. Thirty-four percent of treatment episodes resulted in dropout. Of these, 14% were bad dropouts and 27% were good dropouts. Providers accounted for approximately 17% of the variance in general dropout and 10% of the variance in both bad dropout and good dropout. The ranking of providers fluctuated by type of dropout. Provider assessments based on patient retention should offer a way to isolate dropout type, given that nonspecific metrics may lead to biased estimates of performance.

Customer assessment of long-term care pharmacy provider services.

PubMed

Clark, Thomas R

2008-09-01

Assess performance of long-term care pharmacy providers on key services offered to nursing facilities. Cross-sectional; nursing facility team. Random phone survey of nursing facility team members. 485 nursing facility team members (practicing in nursing facilities, interacting with > or = 1 consultant pharmacist); 46 members excluded, unable to identify facility's pharmacy provider. Directors of nursing, medical directors, and administrators were asked to rate long-term care pharmacy provider performance of eight commonly offered pharmacy services. All groups evaluated pharmacy provider performance of these services using a five-point scale. Results are broken down by employer type. Average rating for eight pharmacy services was 3.64. Top two services: "Labeling medications accurately" ranked in top 1-2 services for all groups (combined rating of 3.97) and "Provides medication administration system" ranked in top 1-3 services for all groups (combined rating of 3.95). One service, "Provides educational inservices," ranked lowest for all groups (combined rating of 3.54). In general, when looking at the eight services in combination for all providers, all services were ranked between Good and Very Good (average score of 3.64). Therefore, while the pharmacy provider is performing above average for these services, there is room for improvement in all of these services. These results can be used as a benchmark. Detailed data results and sample surveys are available online at www.ascp.com/supplements. These surveys can be used by the pharmacy provider to solicit assessments from their own facilities on these services.

Performance and Safety Characteristics of Lithium-molybdenum Disulfide Cells

NASA Technical Reports Server (NTRS)

Stiles, J. A.

1984-01-01

The lithium-molybdenum disulfide system offers attractive characteristics including high rate capability, successful operation up to 75 C, a very low self-discharge rate, a good cycle life and safety characteristics which compare favorably to those of other lithium cells. Moreover, the materials and manufacturing costs for the system is effectively controlled, so the cells should ultimately be competitive with currently marketed rechargeable cells.

Synergistic effects from graphene and carbon nanotubes endow ordered hierarchical structure foams with a combination of compressibility, super-elasticity and stability and potential application as pressure sensors

NASA Astrophysics Data System (ADS)

Kuang, Jun; Dai, Zhaohe; Liu, Luqi; Yang, Zhou; Jin, Ming; Zhang, Zhong

2015-05-01

Nanostructured carbon material based three-dimensional porous architectures have been increasingly developed for various applications, e.g. sensors, elastomer conductors, and energy storage devices. Maintaining architectures with good mechanical performance, including elasticity, load-bearing capacity, fatigue resistance and mechanical stability, is prerequisite for realizing these functions. Though graphene and CNT offer opportunities as nanoscale building blocks, it still remains a great challenge to achieve good mechanical performance in their microarchitectures because of the need to precisely control the structure at different scales. Herein, we fabricate a hierarchical honeycomb-like structured hybrid foam based on both graphene and CNT. The resulting materials possess excellent properties of combined high specific strength, elasticity and mechanical stability, which cannot be achieved in neat CNT and graphene foams. The improved mechanical properties are attributed to the synergistic-effect-induced highly organized, multi-scaled hierarchical architectures. Moreover, with their excellent electrical conductivity, we demonstrated that the hybrid foams could be used as pressure sensors in the fields related to artificial skin.Nanostructured carbon material based three-dimensional porous architectures have been increasingly developed for various applications, e.g. sensors, elastomer conductors, and energy storage devices. Maintaining architectures with good mechanical performance, including elasticity, load-bearing capacity, fatigue resistance and mechanical stability, is prerequisite for realizing these functions. Though graphene and CNT offer opportunities as nanoscale building blocks, it still remains a great challenge to achieve good mechanical performance in their microarchitectures because of the need to precisely control the structure at different scales. Herein, we fabricate a hierarchical honeycomb-like structured hybrid foam based on both graphene and CNT. The resulting materials possess excellent properties of combined high specific strength, elasticity and mechanical stability, which cannot be achieved in neat CNT and graphene foams. The improved mechanical properties are attributed to the synergistic-effect-induced highly organized, multi-scaled hierarchical architectures. Moreover, with their excellent electrical conductivity, we demonstrated that the hybrid foams could be used as pressure sensors in the fields related to artificial skin. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr00841g

Flexible Fe3O4@Carbon Nanofibers Hierarchically Assembled with MnO2 Particles for High-Performance Supercapacitor Electrodes.

PubMed

Iqbal, Nousheen; Wang, Xianfeng; Babar, Aijaz Ahmed; Zainab, Ghazala; Yu, Jianyong; Ding, Bin

2017-11-09

Increasing use of wearable electronic devices have resulted in enhanced demand for highly flexible supercapacitor electrodes with superior electrochemical performance. In this study, flexible composite membranes with electrosprayed MnO 2 particles uniformly anchored on Fe 3 O 4 doped electrospun carbon nanofibers (Fe 3 O 4 @CNF Mn ) have been prepared as flexible electrodes for high-performance supercapacitors. The interconnected porous beaded structure ensures free movement of electrolyte within the composite membranes, therefore, the developed supercapacitor electrodes not only offer high specific capacitance of ~306 F/g, but also exhibit good capacitance retention of ~85% after 2000 cycles, which certify that the synthesized electrodes offer high and stable electrochemical performance. Additionally, the supercapacitors fabricated from our developed electrodes well maintain their performance under flexural stress and exhibit a very minute change in specific capacitance even up to 180° bending angle. The developed electrode fabrication strategy integrating electrospinning and electrospray techniques paves new insights into the development of potential functional nanofibrous materials for light weight and flexible wearable supercapacitors.

The Nike-Black Brant V development program

NASA Technical Reports Server (NTRS)

Sevier, H.; Payne, B.; Ott, R.; Montag, W.

1976-01-01

The Nike-Black Brant V represents a combined U.S.-Canadian program to achieve a 40 percent increase in apogee performance over that of the unboosted BBV, with minimum component modification and no meaningful increase in flight environment levels. The process of achieving these objectives is described, in particular optimization of sustainer coast period and roll history, and the techniques used to ensure good stage separation. Details of the structural test program and subsequent successful vehicle proving flight are provided. Basic performance data are preented, with an indication of the further potential offered by Terrier boost.

Deterring Violent Extremism in America by Utilizing Good Counter-Radicalization Practices from Abroad: A Policy Perspective

DTIC Science & Technology

2017-03-01

offering rehabilitation programs to former extremists. This thesis provides a way ahead for American policy makers by sharing good practices in each of...and offering training to prevent terrorism from when individuals are young. Understanding that humans are fallible, American policy makers and...in the United Kingdom that provided trained Islamic scholars to offer advice about the true teaching of Islam.102 The hotline “El-Hatef el- Islami’s

Shaking Up the School House: How To Support and Sustain Educational Innovation. The Jossey-Bass Education Series.

ERIC Educational Resources Information Center

Schlechty, Phillip C.

Public education is threatened as it struggles to keep up with the pace of change in American society. School systems are change prone but are not good at transforming change into improved performance. This book sheds light on why and what might be done about it. Part 1 offers an overview of the current situation in U.S. public schools and…

Brief Lags in Interrupted Sequential Performance: Evaluating a Model and Model Evaluation Method

DTIC Science & Technology

2015-01-05

rehearsal mechanism in the model. To evaluate the model we developed a simple new goodness-of-fit test based on analysis of variance that offers an...repeated step). Sequen- tial constraints are common in medicine, equipment maintenance, computer programming and technical support, data analysis ...legal analysis , accounting, and many other home and workplace environ- ments. Sequential constraints also play a role in such basic cognitive processes

Profitability Implications of Sustainable Contracting

DTIC Science & Technology

2006-08-01

in a way that minimizes its impact on the environment. The environmental and social impacts of becoming green are at best positive and at worst...environmental, economic and social impacts of business [3-4]. The triple bottom line asserts that there is value created from being good stewards of the...reputation. Factor Services offered Sales volume Marketing efforts Friendly and helpful staff Past performance Rankings Most impact (1) (2) (3) (4) Least

Scalable Fabrication of High-Performance Transparent Conductors Using Graphene Oxide-Stabilized Single-Walled Carbon Nanotube Inks

PubMed Central

He, Linxiang; Liao, Chengzhu

2018-01-01

Recent development in liquid-phase processing of single-walled carbon nanotubes (SWNTs) has revealed rod-coating as a promising approach for large-scale production of SWNT-based transparent conductors. Of great importance in the ink formulation is the stabilizer having excellent dispersion stability, environmental friendly and tunable rheology in the liquid state, and also can be readily removed to enhance electrical conductivity and mechanical stability. Herein we demonstrate the promise of graphene oxide (GO) as a synergistic stabilizer for SWNTs in water. SWNTs dispersed in GO is formulated into inks with homogeneous nanotube distribution, good wetting and rheological properties, and compatible with industrial rod coating practice. Microwave treatment of rod-coated films can reduce GOs and enhance electro-optical performance. The resultant films offer a sheet resistance of ~80 Ω/sq at 86% transparency, along with good mechanical flexibility. Doping the films with nitric acid can further decrease the sheet resistance to ~25 Ω/sq. Comparing with the films fabricated from typical surfactant-based SWNT inks, our films offer superior adhesion as assessed by the Scotch tape test. This study provides new insight into the selection of suitable stabilizers for functional SWNT inks with strong potential for printed electronics. PMID:29642446

Commentary: Malpractice Reform in Policy Perspective

PubMed Central

Bovbjerg, Randall R

2007-01-01

Enacted caps on malpractice awards and proposed early offer reform address the sometimes excessive verdicts of conventional liability and its very high overhead costs. However, such reforms greatly benefit medical defendants while doing too little for claimants or patients in general. Caps and early offer only affect current claims; far broader reforms are therefore needed to improve the woeful performance of liability as a general promoter of patient safety and injury compensation. Broad reforms, however desirable, seldom surmount high political and practical hurdles. A good, more evenhanded start would seek to make claims resolution faster, more accurate, more predictable, and less expensive, while separately promoting medical quality and safety as well as greater transparency for law, medicine, and insurance. PMID:17517117

Designing solution-processable air-stable liquid crystalline crosslinkable semiconductors.

PubMed

McCulloch, Iain; Bailey, Clare; Genevicius, Kristijonas; Heeney, Martin; Shkunov, Maxim; Sparrowe, David; Tierney, Steven; Zhang, Weimin; Baldwin, Rodney; Kreouzis, Theo; Andreasen, Jens W; Breiby, Dag W; Nielsen, Martin M

2006-10-15

Organic electronics technology, in which at least the semiconducting component of the integrated circuit is an organic material, offers the potential for fabrication of electronic products by low-cost printing technologies, such as ink jet, gravure offset lithography and flexography. The products will typically be of lower performance than those using the present state of the art single crystal or polysilicon transistors, but comparable to amorphous silicon. A range of prototypes are under development, including rollable electrophoretic displays, active matrix liquid crystal (LC) displays, flexible organic light emitting diode displays, low frequency radio frequency identification tag and other low performance electronics. Organic semiconductors that offer both electrical performance and stability with respect to storage and operation under ambient conditions are required. This work describes the development of reactive mesogen semiconductors, which form large crosslinked LC domains on polymerization within mesophases. These crosslinked domains offer mechanical stability and are inert to solvent exposure in further processing steps. Reactive mesogens containing conjugated aromatic cores, designed to facilitate charge transport and provide good oxidative stability, were prepared and their liquid crystalline properties evaluated. The organization and alignment of the mesogens, both before and after crosslinking, were probed by grazing incidence wide-angle X-ray scattering of thin films. Both time-of-flight and field effect transistor devices were prepared and their electrical characterization reported.

Satiated with belongingness? Effects of acceptance, rejection, and task framing on self-regulatory performance.

PubMed

DeWall, C Nathan; Baumeister, Roy F; Vohs, Kathleen D

2008-12-01

Seven experiments showed that the effects of social acceptance and social exclusion on self-regulatory performance depend on the prospect of future acceptance. Excluded participants showed decrements in self-regulation, but these decrements were eliminated if the self-regulation task was ostensibly a diagnostic indicator of the ability to get along with others. No such improvement was found when the task was presented as diagnostic of good health. Accepted participants, in contrast, performed relatively poorly when the task was framed as a diagnostic indicator of interpersonally attractive traits. Furthermore, poor performance among accepted participants was not due to self-handicapping or overconfidence. Offering accepted participants a cash incentive for self-regulating eliminated the self-regulation deficits. These findings provide evidence that the need to belong fits standard motivational patterns: Thwarting the drive intensifies it, whereas satiating it leads to temporary reduction in drive. Accepted people are normally good at self-regulation but are unwilling to exert the effort to self-regulate if self-regulation means gaining the social acceptance they have already obtained.

Satiated with Belongingness? Effects of Acceptance, Rejection, and Task Framing on Self-Regulatory Performance

PubMed Central

DeWall, C. Nathan; Baumeister, Roy F.; Vohs, Kathleen D.

2008-01-01

Seven experiments showed that the effects of social acceptance and social exclusion on self-regulatory performance depend on the prospect of future acceptance. Excluded participants showed decrements in self-regulation, but these decrements were eliminated if the self-regulation task was ostensibly a diagnostic indicator of the ability to get along with others. No such improvement was found when the task was presented as diagnostic of good health. Accepted participants, in contrast, performed relatively poorly when the task was framed as a diagnostic indicator of interpersonally attractive traits. Furthermore, poor performance among accepted participants was not due to self-handicapping or overconfidence. Offering accepted participants a cash incentive for self-regulating eliminated the self-regulation deficits. These findings provide evidence that the need to belong fits standard motivational patterns: thwarting the drive intensifies it, whereas satiating it leads to temporary reduction in drive. Accepted people are normally good at self-regulation but are unwilling to exert the effort to self-regulate if self-regulation means gaining the social acceptance they have already obtained. PMID:19025289

Kinetic Monte Carlo Simulation of Oxygen Diffusion in Ytterbium Disilicate

NASA Technical Reports Server (NTRS)

Good, Brian S.

2015-01-01

Silicon-based ceramic components for next-generation jet turbine engines offer potential weight savings, as well as higher operating temperatures, both of which lead to increased efficiency and lower fuel costs. Silicon carbide (SiC), in particular, offers low density, good strength at high temperatures, and good oxidation resistance in dry air. However, reaction of SiC with high-temperature water vapor, as found in the hot section of jet turbine engines in operation, can cause rapid surface recession, which limits the lifetime of such components. Environmental Barrier Coatings (EBCs) are therefore needed if long component lifetime is to be achieved. Rare earth silicates such as Yb2Si2O7 and Yb2SiO5 have been proposed for such applications; in an effort to better understand diffusion in such materials, we have performed kinetic Monte Carlo (kMC) simulations of oxygen diffusion in Ytterbium disilicate, Yb2- Si2O7. The diffusive process is assumed to take place via the thermally activated hopping of oxygen atoms among oxygen vacancy sites or among interstitial sites. Migration barrier energies are computed using density functional theory (DFT).

A nonproprietary, nonsecret program for calculating Stirling cryocoolers

NASA Technical Reports Server (NTRS)

Martini, W. R.

1985-01-01

A design program for an integrated Stirling cycle cryocooler was written on an IBM-PC computer. The program is easy to use and shows the trends and itemizes the losses. The calculated results were compared with some measured performance values. The program predicts somewhat optimistic performance and needs to be calibrated more with experimental measurements. Adding a multiplier to the friction factor can bring the calculated rsults in line with the limited test results so far available. The program is offered as a good framework on which to build a truly useful design program for all types of cryocoolers.

Design and evaluation of experimental ceramic automobile thermal reactors

NASA Technical Reports Server (NTRS)

Stone, P. L.; Blankenship, C. P.

1974-01-01

The paper summarizes the results obtained in an exploratory evaluation of ceramics for automobile thermal reactors. Candidate ceramic materials were evaluated in several reactor designs using both engine dynamometer and vehicle road tests. Silicon carbide contained in a corrugated metal support structure exhibited the best performance, lasting 1100 hours in engine dynamometer tests and for more than 38,600 kilimeters (24,000 miles) in vehicle road tests. Although reactors containing glass-ceramic components did not perform as well as silicon carbide, the glass-ceramics still offer good potential for reactor use with improved reactor designs.

Design and evaluation of experimental ceramic automobile thermal reactors

NASA Technical Reports Server (NTRS)

Stone, P. L.; Blankenship, C. P.

1974-01-01

The results obtained in an exploratory evaluation of ceramics for automobile thermal reactors are summarized. Candidate ceramic materials were evaluated in several reactor designs by using both engine-dynamometer and vehicle road tests. Silicon carbide contained in a corrugated-metal support structure exhibited the best performance, lasting 1100 hr in engine-dynamometer tests and more than 38,600 km (24000 miles) in vehicle road tests. Although reactors containing glass-ceramic components did not perform as well as those containing silicon carbide, the glass-ceramics still offer good potential for reactor use with improved reactor designs.

77 FR 43887 - Self-Regulatory Organizations; BATS Y-Exchange, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... donor. A ``customer'' is any person who is or may be required to pay for goods or services through... inquire about a product or service offered by the Member within the three months immediately preceding the... conversion'' means, in an offer or agreement to sell or provide any goods or services, a provision under...

77 FR 51076 - Self-Regulatory Organizations; National Stock Exchange, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

... offer or agreement to sell or provide any goods or services, a provision under which a customer receives... product or service offered by the ETP Holder within the three months immediately preceding the date of an... condition of purchasing any good or service; (c) evidence the willingness of the called person to receive...

[Tolerance of latissimus dorsi without implant to radiotherapy in immediate breast reconstruction].

PubMed

Carrabin, N; Vermersh, C; Faure, C; Dammacco, M A; Delay, E; Ho Quoc, C

2015-12-01

Rates of immediate breast reconstruction (IBR) after mastectomy are currently increasing, leading us to evaluate outcomes of breast reconstruction with latissimus dorsi without implant followed by adjuvant radiotherapy. From January 1999 to August 2013, 31 breast reconstructions with latissimus dorsi have been irradiated. Patients have been selected from a prospective database and contacted to evaluate outcomes of breast reconstruction, and 2 patients have been lost. Median follow-up was 6.5 years. Breast reconstruction outcomes were evaluated as very good or good in 86% of cases, with breast reconstructed consistency as very good or good in 93% of cases. An additional fat grafting has been performed for 58% of cases (mean volume transferred of 250 cc) and was associated with contralateral breast reduction in 32% of the whole population. IBR was judged as essential for 79% of women a posteriori. In our experience, latissimus dorsi has a good tolerance to adjuvant irradiation, and may be offered to patients willing to benefit of an IBR even if postoperative radiotherapy is scheduled. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Design and construction of an experimental pervious paved parking area to harvest reusable rainwater.

PubMed

Gomez-Ullate, E; Novo, A V; Bayon, J R; Hernandez, Jorge R; Castro-Fresno, Daniel

2011-01-01

Pervious pavements are sustainable urban drainage systems already known as rainwater infiltration techniques which reduce runoff formation and diffuse pollution in cities. The present research is focused on the design and construction of an experimental parking area, composed of 45 pervious pavement parking bays. Every pervious pavement was experimentally designed to store rainwater and measure the levels of the stored water and its quality over time. Six different pervious surfaces are combined with four different geotextiles in order to test which materials respond better to the good quality of rainwater storage over time and under the specific weather conditions of the north of Spain. The aim of this research was to obtain a good performance of pervious pavements that offered simultaneously a positive urban service and helped to harvest rainwater with a good quality to be used for non potable demands.

Improving parallel I/O autotuning with performance modeling

DOE PAGES

Behzad, Babak; Byna, Surendra; Wild, Stefan M.; ...

2014-01-01

Various layers of the parallel I/O subsystem offer tunable parameters for improving I/O performance on large-scale computers. However, searching through a large parameter space is challenging. We are working towards an autotuning framework for determining the parallel I/O parameters that can achieve good I/O performance for different data write patterns. In this paper, we characterize parallel I/O and discuss the development of predictive models for use in effectively reducing the parameter space. Furthermore, applying our technique on tuning an I/O kernel derived from a large-scale simulation code shows that the search time can be reduced from 12 hours to 2more » hours, while achieving 54X I/O performance speedup.« less

Core-shell structured MnSiO3 supported with CNTs as a high capacity anode for lithium-ion batteries.

PubMed

Feng, Jing; Li, Qin; Wang, Huijun; Zhang, Min; Yang, Xia; Yuan, Ruo; Chai, Yaqin

2018-04-17

Metal silicates are good candidates for use in lithium ion batteries (LIBs), however, their electrochemical performance is hindered by their poor electrical conductivity and volume expansion during Li+ insertion/desertion. In this work, one-dimensional core-shell structured MnSiO3 supported with carbon nanotubes (CNTs) (referred to as CNT@MnSiO3) with good conductivity and electrochemical performance has been successfully synthesized using a solvothermal process under moderate conditions. In contrast to traditional composites of CNTs and nanoparticles, the CNT@MnSiO3 composite in this work is made up of CNTs with a layer of MnSiO3 on the surface. The one-dimensional CNT@MnSiO3 nanotubes provide a useful channel for transferring Li+ ions during the discharge/charge process, which accelerates the Li+ diffusion speed. The CNTs inside the structure not only enhance the conductivity of the composite, but also prevent volume expansion. A high reversible capacity (920 mA h g-1 at 500 mA g-1 over 650 cycles) and good rate performance were obtained for CNT@MnSiO3, showing that this strategy of synthesizing coaxial CNT@MnSiO3 nanotubes offers a promising method for preparing other silicates for LIBs or other applications.

Feedback, the various tasks of the doctor, and the feedforward alternative.

PubMed

Kluger, Avraham N; Van Dijk, Dina

2010-12-01

This study aims to alert users of feedback to its dangers, explain some of its complexities and offer the feedforward alternative. We review the damage that feedback may cause to both motivation and performance. We provide an initial solution to the puzzle of the feedback sign (positive versus negative) using the concepts of promotion focus and prevention focus. We discuss additional open questions pertaining to feedback sign and consider implications for health care systems. Feedback that threatens the self is likely to debilitate recipients and, on average, positive and negative feedback are similar in their effects on performance. Positive feedback contributes to motivation and performance under promotion focus, but the same is true for negative feedback under prevention focus. We offer an alternative to feedback--the feedforward interview--and describe a brief protocol and suggestions on how it might be used in medical education. Feedback is a double-edged sword; its effective application includes careful consideration of regulatory focus and of threats to the self. Feedforward may be a good substitute for feedback in many settings. © Blackwell Publishing Ltd 2010.

Flexible Photodetectors Based on 1D Inorganic Nanostructures

PubMed Central

Lou, Zheng

2015-01-01

Flexible photodetectors with excellent flexibility, high mechanical stability and good detectivity, have attracted great research interest in recent years. 1D inorganic nanostructures provide a number of opportunities and capabilities for use in flexible photodetectors as they have unique geometry, good transparency, outstanding mechanical flexibility, and excellent electronic/optoelectronic properties. This article offers a comprehensive review of several types of flexible photodetectors based on 1D nanostructures from the past ten years, including flexible ultraviolet, visible, and infrared photodetectors. High‐performance organic‐inorganic hybrid photodetectors, as well as devices with 1D nanowire (NW) arrays, are also reviewed. Finally, new concepts of flexible photodetectors including piezophototronic, stretchable and self‐powered photodetectors are examined to showcase the future research in this exciting field. PMID:27774404

Airframe-integrated propulsion system for hypersonic cruise vehicles

NASA Technical Reports Server (NTRS)

Jones, R. A.; Huber, P. W.

1978-01-01

The paper describes a new hydrogen-burning airframe-integrated scramjet concept which offers good potential for efficient hypersonic cruise vehicles. The characteristics of the engine which assure good performance are extensive engine-airframe integration, fixed geometry, low cooling, and control of heat release in the supersonic combustor by mixed modes of fuel injection from the combustor entrance. The present paper describes the concept and presents results from inlet tests, direct-connect combustor tests, and tests of two subscale boiler-plate research engines currently underway under conditions which simulate flight at Mach 4 and 7. It is concluded that this engine concept has the potential for high thrust and efficiency, low drag and weight, low cooling requirement, and application to a wide range of vehicle sizes.

A Lithium-Air Battery Stably Working at High Temperature with High Rate Performance.

PubMed

Pan, Jian; Li, Houpu; Sun, Hao; Zhang, Ye; Wang, Lie; Liao, Meng; Sun, Xuemei; Peng, Huisheng

2018-02-01

Driven by the increasing requirements for energy supply in both modern life and the automobile industry, the lithium-air battery serves as a promising candidate due to its high energy density. However, organic solvents in electrolytes are likely to rapidly vaporize and form flammable gases under increasing temperatures. In this case, serious safety problems may occur and cause great harm to people. Therefore, a kind of lithium-air that can work stably under high temperature is desirable. Herein, through the use of an ionic liquid and aligned carbon nanotubes, and a fiber shaped design, a new type of lithium-air battery that can effectively work at high temperatures up to 140 °C is developed. Ionic liquids can offer wide electrochemical windows and low vapor pressures, as well as provide high thermal stability for lithium-air batteries. The aligned carbon nanotubes have good electric and heat conductivity. Meanwhile, the fiber format can offer both flexibility and weavability, and realize rapid heat conduction and uniform heat distribution of the battery. In addition, the high temperature has also largely improved the specific powers by increasing the ionic conductivity and catalytic activity of the cathode. Consequently, the lithium-air battery can work stably at 140 °C with a high specific current of 10 A g -1 for 380 cycles, indicating high stability and good rate performance at high temperatures. This work may provide an effective paradigm for the development of high-performance energy storage devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

How well do contoured superior midshaft clavicle plates fit the clavicle? A cadaveric study.

PubMed

Malhas, Amar M; Skarparis, Yiannis G; Sripada, Sankar; Soames, Roger W; Jariwala, Arpit C

2016-06-01

Given the degree of variation in clavicular morphology, 4 clavicle plating systems were examined for their congruity as superior, midshaft, anatomic clavicle (SMAC) plates in a cadaveric study. SMAC plates from 4 manufacturers were applied to 79 dry right human clavicles. Two systems offered multiple (4) variations of plates (MP), 1 offered two variations (TP), and 1 had a single plate (SP). Two examiners applied and clamped the best-fitting plate from each system onto each of the 79 clavicles and then graded them: 1, poor fit; 2, good fit; and 3, anatomic fit. Each examiner repeated the process to assess intraobserver and interobserver reliability. The scores were averaged to produce a final score for each system for each clavicle. The MP systems scored the highest (32%-37% anatomic, 54%-63% good, 5%-8% poor), followed by the TP system (30% anatomic, 53% good, 17% poor), and finally the SP system (9% anatomic, 59% good, 32% poor). Of note, clavicular length significantly correlated with a higher degree of conformity in all plating systems (Spearman rank correlation P < .05 for each system). In clavicles longer than 150 mm, the MP and TP systems performed identically, with the SP system close behind. Contouring of the plate is needed in 73% of cases overall. Plating systems with multiple plate shape variations are more advantageous when dealing with smaller-sized clavicles, typically in females. However, when dealing with larger clavicles, there was no real difference. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

17 CFR 230.506 - Exemption for limited offers and sales without regard to dollar amount of offering.

Code of Federal Regulations, 2014 CFR

2014-04-01

... registered and in good standing under the laws of the place of his or her residence or principal office. (D... director, executive officer or other officer participating in the offering of any such investment manager... Regulation D-Rules Governing the Limited Offer and Sale of Securities Without Registration Under the...

Trustworthiness and Negative Affect Predict Economic Decision-Making.

PubMed

Nguyen, Christopher M; Koenigs, Michael; Yamada, Torricia H; Teo, Shu Hao; Cavanaugh, Joseph E; Tranel, Daniel; Denburg, Natalie L

2011-09-01

The Ultimatum Game (UG) is a widely used and well-studied laboratory model of economic decision-making. Here, we studied 129 healthy adults and compared demographic (i.e., age, gender, education), cognitive (i.e., intelligence, attention/working memory, speed, language, visuospatial, memory, executive functions), and personality (i.e., "Big Five", positive affect, negative affect) variables between those with a "rational" versus an "irrational" response pattern on the UG. Our data indicated that participants with "rational" UG performance (accepting any offer, no matter the fairness) endorsed higher levels of trust, or the belief in the sincerity and good intentions of others, while participants with "irrational" UG performance (rejecting unfair offers) endorsed higher levels of negative affect, such as anger and contempt. These personality variables were the only ones that differentiated the two response patterns-demographic and cognitive factors did not differ between rational and irrational players. The results indicate that the examination of personality and affect is crucial to our understanding of the individual differences that underlie decision-making.

Trustworthiness and Negative Affect Predict Economic Decision-Making

PubMed Central

Nguyen, Christopher M.; Koenigs, Michael; Yamada, Torricia H.; Teo, Shu Hao; Cavanaugh, Joseph E.; Tranel, Daniel; Denburg, Natalie L.

2012-01-01

The Ultimatum Game (UG) is a widely used and well-studied laboratory model of economic decision-making. Here, we studied 129 healthy adults and compared demographic (i.e., age, gender, education), cognitive (i.e., intelligence, attention/working memory, speed, language, visuospatial, memory, executive functions), and personality (i.e., “Big Five”, positive affect, negative affect) variables between those with a “rational” versus an “irrational” response pattern on the UG. Our data indicated that participants with “rational” UG performance (accepting any offer, no matter the fairness) endorsed higher levels of trust, or the belief in the sincerity and good intentions of others, while participants with “irrational” UG performance (rejecting unfair offers) endorsed higher levels of negative affect, such as anger and contempt. These personality variables were the only ones that differentiated the two response patterns—demographic and cognitive factors did not differ between rational and irrational players. The results indicate that the examination of personality and affect is crucial to our understanding of the individual differences that underlie decision-making. PMID:23493494

Electrical Properties of Reactive Liquid Crystal Semiconductors

NASA Astrophysics Data System (ADS)

McCulloch, Iain; Coelle, Michael; Genevicius, Kristijonas; Hamilton, Rick; Heckmeier, Michael; Heeney, Martin; Kreouzis, Theo; Shkunov, Maxim; Zhang, Weimin

2008-01-01

Fabrication of display products by low cost printing technologies such as ink jet, gravure offset lithography and flexography requires solution processable semiconductors for the backplane electronics. The products will typically be of lower performance than polysilicon transistors, but comparable to amorphous silicon. A range of prototypes are under development, including rollable electrophoretic displays, active matrix liquid crystal displays (AMLCD's), and flexible organic light-emitting diode (OLED) displays. Organic semiconductors that offer both electrical performance and stability with respect to storage and operation under ambient conditions are required. This work describes the initial evaluation of reactive mesogen semiconductors, which can polymerise within mesophase temperatures, “freezing in” the order in crosslinked domains. These crosslinked domains offer mechanical stability and are inert to solvent exposure in further processing steps. Reactive mesogens containing conjugated aromatic cores, designed to facilitate charge transport and provide good oxidative stability, were prepared and their liquid crystalline properties evaluated. Both time-of-flight and field effect transistor devices were prepared and their electrical characterisation reported.

Composite Structural Materials

NASA Technical Reports Server (NTRS)

Ansell, G. S.; Loewy, R. G.; Wiberly, S. E.

1984-01-01

The development and application of filamentary composite materials, is considered. Such interest is based on the possibility of using relatively brittle materials with high modulus, high strength, but low density in composites with good durability and high tolerance to damage. Fiber reinforced composite materials of this kind offer substantially improved performance and potentially lower costs for aerospace hardware. Much progress has been made since the initial developments in the mid 1960's. There were only limited applied to the primary structure of operational vehicles, mainly as aircrafts.

"Apron" flap and re-creation of the inframammary fold following TRAM flap breast reconstruction.

PubMed

Amir, A; Silfen, R; Hauben, D J

2000-03-01

To the best of our knowledge, the recreation of an inframammary fold after TRAM flap breast reconstruction has not yet been described. This article offers a technique for the creation of an inframammary fold as a secondary procedure. The technique has been performed thus far in two patients with good aesthetic outcomes and no postoperative complications. It may also be suitable for adding bulk to the TRAM flap, especially in bilateral breast reconstruction, and for other minor chest deformities.

Study the performance of LYSO and CeBr3 crystals using Silicon Photomultipliers

NASA Astrophysics Data System (ADS)

Kryemadhi, Abaz

2016-03-01

The Silicon Photomultipliers (SiPMs) are novel photon-detectors which have been progressively found their use in particle physics. Their small size, good single photon resolution, simple readout, and immunity to magnetic fields offers advantages compared to traditional photomultipliers. LYSO and CeBr3 crystals are relatively new scintillators with high light yield and fast decay time. The response of these detectors to low energy gamma rays and cosmic ray muons will be presented. Messiah College Workload Reallocation Program.

Dual channel sensitive detection of hsa-miR-21 based on rolling circle amplification and quantum dots tagging.

PubMed

Wangt, Dan-Chen; Hu, Li-Hui; Zhou, Yu-Hui; Huang, Yu-Ting; Li, Xinhua; Zhu, Jun-Jie

2014-04-01

An isothermal, highly sensitive and specific assay for the detection of hsa-miR-21 with the integration of QDs tagging and rolling circle amplification was offered. In addition, a dual channel strategy for miRNA detection was proposed: anodic stripping voltammetry (ASV) and fluorescent method were both performed for the final Cd2+ signal readout. The designed strategy exhibited good specificity to hsa-miR-21 and presented comparable detection results by detection methods.

Exploratory evaluation of ceramics for automobile thermal reactors

NASA Technical Reports Server (NTRS)

Stone, P. L.; Blankenship, C. P.

1972-01-01

An exploratory evaluation of ceramics for automobile thermal reactors was conducted. Potential ceramic materials were evaluated in several reactor designs using both engine dynamometer and vehicle road tests. Silicon carbide contained in a corrugated metal support structure exhibited the best performance lasting over 800 hours in engine dynamometer tests and over 15,000 miles (24,200 km) of vehicle road tests. Reactors containing glass-ceramic components did not perform as well as silicon carbide. But the glass-ceramics still offer good potential for reactor use. The results of this study are considered to be a reasonable demonstration of the potential use of ceramics in thermal reactors.

First magnetic resonance imaging-guided aortic stenting and cava filter placement using a polyetheretherketone-based magnetic resonance imaging-compatible guidewire in swine: proof of concept.

PubMed

Kos, Sebastian; Huegli, Rolf; Hofmann, Eugen; Quick, Harald H; Kuehl, Hilmar; Aker, Stephanie; Kaiser, Gernot M; Borm, Paul J A; Jacob, Augustinus L; Bilecen, Deniz

2009-05-01

The purpose of this study was to demonstrate feasibility of percutaneous transluminal aortic stenting and cava filter placement under magnetic resonance imaging (MRI) guidance exclusively using a polyetheretherketone (PEEK)-based MRI-compatible guidewire. Percutaneous transluminal aortic stenting and cava filter placement were performed in 3 domestic swine. Procedures were performed under MRI-guidance in an open-bore 1.5-T scanner. The applied 0.035-inch guidewire has a PEEK core reinforced by fibres, floppy tip, hydrophilic coating, and paramagnetic markings for passive visualization. Through an 11F sheath, the guidewire was advanced into the abdominal (swine 1) or thoracic aorta (swine 2), and the stents were deployed. The guidewire was advanced into the inferior vena cava (swine 3), and the cava filter was deployed. Postmortem autopsy was performed. Procedural success, guidewire visibility, pushability, and stent support were qualitatively assessed by consensus. Procedure times were documented. Guidewire guidance into the abdominal and thoracic aortas and the inferior vena cava was successful. Stent deployments were successful in the abdominal (swine 1) and thoracic (swine 2) segments of the descending aorta. Cava filter positioning and deployment was successful. Autopsy documented good stent and filter positioning. Guidewire visibility through applied markers was rated acceptable for aortic stenting and good for venous filter placement. Steerability, pushability, and device support were good. The PEEK-based guidewire allows either percutaneous MRI-guided aortic stenting in the thoracic and abdominal segments of the descending aorta and filter placement in the inferior vena cava with acceptable to good device visibility and offers good steerability, pushability, and device support.

First Magnetic Resonance Imaging-Guided Aortic Stenting and Cava Filter Placement Using a Polyetheretherketone-Based Magnetic Resonance Imaging-Compatible Guidewire in Swine: Proof of Concept

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kos, Sebastian, E-mail: skos@gmx.d; Huegli, Rolf; Hofmann, Eugen

The purpose of this study was to demonstrate feasibility of percutaneous transluminal aortic stenting and cava filter placement under magnetic resonance imaging (MRI) guidance exclusively using a polyetheretherketone (PEEK)-based MRI-compatible guidewire. Percutaneous transluminal aortic stenting and cava filter placement were performed in 3 domestic swine. Procedures were performed under MRI-guidance in an open-bore 1.5-T scanner. The applied 0.035-inch guidewire has a PEEK core reinforced by fibres, floppy tip, hydrophilic coating, and paramagnetic markings for passive visualization. Through an 11F sheath, the guidewire was advanced into the abdominal (swine 1) or thoracic aorta (swine 2), and the stents were deployed. Themore » guidewire was advanced into the inferior vena cava (swine 3), and the cava filter was deployed. Postmortem autopsy was performed. Procedural success, guidewire visibility, pushability, and stent support were qualitatively assessed by consensus. Procedure times were documented. Guidewire guidance into the abdominal and thoracic aortas and the inferior vena cava was successful. Stent deployments were successful in the abdominal (swine 1) and thoracic (swine 2) segments of the descending aorta. Cava filter positioning and deployment was successful. Autopsy documented good stent and filter positioning. Guidewire visibility through applied markers was rated acceptable for aortic stenting and good for venous filter placement. Steerability, pushability, and device support were good. The PEEK-based guidewire allows either percutaneous MRI-guided aortic stenting in the thoracic and abdominal segments of the descending aorta and filter placement in the inferior vena cava with acceptable to good device visibility and offers good steerability, pushability, and device support.« less

Chemotherapy Use, Performance Status, and Quality of Life at the End of Life

PubMed Central

Prigerson, Holly G.; Bao, Yuhua; Shah, Manish A.; Paulk, M. Elizabeth; LeBlanc, Thomas W.; Schneider, Bryan J.; Garrido, Melissa M.; Reid, M. Carrington; Berlin, David A.; Adelson, Kerin B.; Neugut, Alfred I.; Maciejewski, Paul K.

2016-01-01

IMPORTANCE Although many patients with end-stage cancer are offered chemotherapy to improve quality of life (QOL), the association between chemotherapy and QOL amid progressive metastatic disease has not been well-studied. American Society for Clinical Oncology guidelines recommend palliative chemotherapy only for solid tumor patients with good performance status. OBJECTIVE To evaluate the association between chemotherapy use and QOL near death (QOD) as a function of patients’ performance status. DESIGN, SETTING, AND PARTICIPANTS A multi-institutional, longitudinal cohort study of patients with end-stage cancer recruited between September 2002 and February 2008. Chemotherapy use (n = 158 [50.6%]) and Eastern Cooperative Oncology Group (ECOG) performance status were assessed at baseline (median = 3.8 months before death) and patients with progressive metastatic cancer (N = 312) following at least 1 chemotherapy regimen were followed prospectively until death at 6 outpatient oncology clinics in the United States. MAIN OUTCOMES AND MEASURES Patient QOD was determined using validated caregiver ratings of patients’ physical and mental distress in their final week. RESULTS Chemotherapy use was not associated with patient survival controlling for clinical setting and patients’ performance status. Among patients with good (ECOG score = 1) baseline performance status, chemotherapy use compared with nonuse was associated with worse QOD (odds ratio [OR], 0.35; 95% CI, 0.17-0.75; P = .01). Baseline chemotherapy use was not associated with QOD among patients with moderate (ECOG score = 2) baseline performance status (OR, 1.06; 95% CI, 0.51-2.21; P = .87) or poor (ECOG score = 3) baseline performance status (OR, 1.34; 95% CI, 0.46-3.89; P = .59). CONCLUSIONS AND RELEVANCE Although palliative chemotherapy is used to improve QOL for patients with end-stage cancer, its use did not improve QOD for patients with moderate or poor performance status and worsened QOD for patients with good performance status. The QOD in patients with end-stage cancer is not improved, and can be harmed, by chemotherapy use near death, even in patients with good performance status. PMID:26203912

Which preferences associate with school performance?-Lessons from an exploratory study with university students.

PubMed

Horn, Daniel; Kiss, Hubert Janos

2018-01-01

Success in life is determined to a large extent by school performance so it is important to understand the effect of the factors that influence it. In this exploratory study, in addition to cognitive abilities, we attempt to link measures of preferences with outcomes of school performance. We measured in an incentivized way risk, time, social and competitive preferences and cognitive abilities of university students to look for associations between these measures and two important academic outcome measures: exam results and GPA. We find consistently that cognitive abilities (proxied by the Cognitive Reflection Test) are very well correlated with school performance. Regarding non-cognitive skills, we report suggestive evidence for many of our measured preferences. We used two alternative measures of time preference: patience and present bias. Present bias explains exam grades better, while patience explains GPA relatively better. Both measures of time preferences have a non-linear relation to school performance. Competitiveness matters, as students, who opt for a more competitive payment scheme in our experimental task have a higher average GPA. We observe also that risk-averse students perform a little better than more risk-tolerant students. That makes sense in case of multiple choice exams, because more risk-tolerant students may want to try to pass the exam less prepared, as the possibility of passing an exam just by chance is not zero. Finally, we have also detected that cooperative preferences-the amount of money offered in a public good game-associates strongly with GPA in a non-linear way. Students who offered around half of their possible amounts had significantly higher GPAs than those, who offered none or all their money.

Which preferences associate with school performance?—Lessons from an exploratory study with university students

PubMed Central

2018-01-01

Success in life is determined to a large extent by school performance so it is important to understand the effect of the factors that influence it. In this exploratory study, in addition to cognitive abilities, we attempt to link measures of preferences with outcomes of school performance. We measured in an incentivized way risk, time, social and competitive preferences and cognitive abilities of university students to look for associations between these measures and two important academic outcome measures: exam results and GPA. We find consistently that cognitive abilities (proxied by the Cognitive Reflection Test) are very well correlated with school performance. Regarding non-cognitive skills, we report suggestive evidence for many of our measured preferences. We used two alternative measures of time preference: patience and present bias. Present bias explains exam grades better, while patience explains GPA relatively better. Both measures of time preferences have a non-linear relation to school performance. Competitiveness matters, as students, who opt for a more competitive payment scheme in our experimental task have a higher average GPA. We observe also that risk-averse students perform a little better than more risk-tolerant students. That makes sense in case of multiple choice exams, because more risk-tolerant students may want to try to pass the exam less prepared, as the possibility of passing an exam just by chance is not zero. Finally, we have also detected that cooperative preferences—the amount of money offered in a public good game—associates strongly with GPA in a non-linear way. Students who offered around half of their possible amounts had significantly higher GPAs than those, who offered none or all their money. PMID:29451886

Insight into the epitaxial encapsulation of Pd catalysts in an oriented metalloporphyrin network thin film for tandem catalysis.

PubMed

Vohra, M Ismail; Li, De-Jing; Gu, Zhi-Gang; Zhang, Jian

2017-06-14

A palladium catalyst (Pd-Cs) encapsulated metalloporphyrin network PIZA-1 thin film with bifunctional properties has been developed through a modified epitaxial layer-by-layer encapsulation approach. Combining the oxidation activity of Pd-Cs and the acetalization activity of the Lewis acidic sites in the PIZA-1 thin film, this bifunctional catalyst of the Pd-Cs@PIZA-1 thin film exhibits a good catalytic activity in a one-pot tandem oxidation-acetalization reaction. Furthermore, the surface components can be controlled by ending the top layer with different precursors in the thin film preparation procedures. The catalytic performances of these thin films with different surface composites were studied under the same conditions, which showed different reaction conversions. The result revealed that the surface component can influence the catalytic performance of the thin films. This epitaxial encapsulation offers a good understanding of the tandem catalysis for thin film materials and provides useful guidance to develop new thin film materials with catalytic properties.

Clinical and Radiographic Evaluation of Allium sativum Oil as a New Medicament for Vital Pulp Treatment of Primary Teeth.

PubMed

Mohammad, Shukry Gamal; Raheel, Syed Ahmed; Baroudi, Kusai

2014-01-01

The objective of this study was to compare between the clinical and radiographic effects of Allium sativum oil and those of formocresol in vital pulpotomy in primary teeth. A total of 20 children age ranged from 4 to 8 years were included in the study. In every one of those children, the primary molars indicated for pulpotomy. Pulpotomy procedure was performed, and the radicular pulp tissue of one molar capped with A. sativum oil in a cotton pellet, whereas the other molar capped with formocresol, the teeth evaluated clinically and radiographically before and after 6 months, using standard clinical and radiographical criteria. Statistically, these results revealed no significant difference between the radiographic findings of vital pulpotomy in primary molars with the two medicaments was found. A. sativum oil offers a good healing potential, leaving the remaining pulp tissue healthy and functioning. Vital pulpotomy with allium sativa oil was given raise 90% success rate while that with formocresol was 85%. A. sativum oil is a biocompatible material that is compatible with vital human pulp tissue. It offers a good healing potential, leaving the remaining pulp tissue healthy and functioning.

Clinical and Radiographic Evaluation of Allium sativum Oil as a New Medicament for Vital Pulp Treatment of Primary Teeth

PubMed Central

Mohammad, Shukry Gamal; Raheel, Syed Ahmed; Baroudi, Kusai

2014-01-01

Background: The objective of this study was to compare between the clinical and radiographic effects of Allium sativum oil and those of formocresol in vital pulpotomy in primary teeth. Materials and Methods: A total of 20 children age ranged from 4 to 8 years were included in the study. In every one of those children, the primary molars indicated for pulpotomy. Pulpotomy procedure was performed, and the radicular pulp tissue of one molar capped with A. sativum oil in a cotton pellet, whereas the other molar capped with formocresol, the teeth evaluated clinically and radiographically before and after 6 months, using standard clinical and radiographical criteria. Statistically, these results revealed no significant difference between the radiographic findings of vital pulpotomy in primary molars with the two medicaments was found. Results: A. sativum oil offers a good healing potential, leaving the remaining pulp tissue healthy and functioning. Vital pulpotomy with allium sativa oil was given raise 90% success rate while that with formocresol was 85%. Conclusion: A. sativum oil is a biocompatible material that is compatible with vital human pulp tissue. It offers a good healing potential, leaving the remaining pulp tissue healthy and functioning. PMID:25628480

A Good Suit Beats a Good Idea.

ERIC Educational Resources Information Center

Machiavelli, Nick

1992-01-01

Inspired by Niccolo Machiavelli, this column offers beleaguered school executives advice on looking good, dressing well, losing weight, beating the proper enemy, and saying nothing. Administrators who follow these simple rules should have an easier life, jealous colleagues, well-tended gardens, and respectful board members. (MLH)

Physician Rating Websites: What Aspects Are Important to Identify a Good Doctor, and Are Patients Capable of Assessing Them? A Mixed-Methods Approach Including Physicians’ and Health Care Consumers’ Perspectives

PubMed Central

Schulz, Peter J

2017-01-01

Background Physician rating websites (PRWs) offer health care consumers the opportunity to evaluate their doctor anonymously. However, physicians’ professional training and experience create a vast knowledge gap in medical matters between physicians and patients. This raises ethical concerns about the relevance and significance of health care consumers’ evaluation of physicians’ performance. Objective To identify the aspects physician rating websites should offer for evaluation, this study investigated the aspects of physicians and their practice relevant for identifying a good doctor, and whether health care consumers are capable of evaluating these aspects. Methods In a first step, a Delphi study with physicians from 4 specializations was conducted, testing various indicators to identify a good physician. These indicators were theoretically derived from Donabedian, who classifies quality in health care into pillars of structure, process, and outcome. In a second step, a cross-sectional survey with health care consumers in Switzerland (N=211) was launched based on the indicators developed in the Delphi study. Participants were asked to rate the importance of these indicators to identify a good physician and whether they would feel capable to evaluate those aspects after the first visit to a physician. All indicators were ordered into a 4×4 grid based on evaluation and importance, as judged by the physicians and health care consumers. Agreement between the physicians and health care consumers was calculated applying Holsti’s method. Results In the majority of aspects, physicians and health care consumers agreed on what facets of care were important and not important to identify a good physician and whether patients were able to evaluate them, yielding a level of agreement of 74.3%. The two parties agreed that the infrastructure, staff, organization, and interpersonal skills are both important for a good physician and can be evaluated by health care consumers. Technical skills of a doctor and outcomes of care were also judged to be very important, but both parties agreed that they would not be evaluable by health care consumers. Conclusions Health care consumers in Switzerland show a high appraisal of the importance of physician-approved criteria for assessing health care performance and a moderate self-perception of how capable they are of assessing the quality and performance of a physician. This study supports that health care consumers are differentiating between aspects they perceive they would be able to evaluate after a visit to a physician (such as attributes of structure and the interpersonal skills of a doctor), and others that lay beyond their ability to make an accurate judgment about (such as technical skills of a physician and outcome of care). PMID:28461285

Time perception: the bad news and the good

PubMed Central

Matthews, William J; Meck, Warren H

2014-01-01

Time perception is fundamental and heavily researched, but the field faces a number of obstacles to theoretical progress. In this advanced review, we focus on three pieces of ‘bad news’ for time perception research: temporal perception is highly labile across changes in experimental context and task; there are pronounced individual differences not just in overall performance but in the use of different timing strategies and the effect of key variables; and laboratory studies typically bear little relation to timing in the ‘real world’. We describe recent examples of these issues and in each case offer some ‘good news’ by showing how new research is addressing these challenges to provide rich insights into the neural and information-processing bases of timing and time perception. PMID:25210578

Fuel-Cell Electrolytes Based on Organosilica Hybrid Proton Conductors

NASA Technical Reports Server (NTRS)

Narayan, Sri R.; Yen, Shiao-Pin S.

2008-01-01

A new membrane composite material that combines an organosilica proton conductor with perfluorinated Nafion material to achieve good proton conductivity and high-temperature performance for membranes used for fuel cells in stationary, transportation, and portable applications has been developed. To achieve high proton conductivities of the order of 10(exp -1)S/cm over a wide range of temperatures, a composite membrane based on a new class of mesoporous, proton-conducting, hydrogen-bonded organosilica, used with Nafion, will allow for water retention and high proton conductivity over a wider range of temperatures than currently offered by Nafion alone. At the time of this reporting, this innovation is at the concept level. Some of the materials and processes investigated have shown good proton conductivity, but membranes have not yet been prepared and demonstrated.

N-doped yolk-shell hollow carbon sphere wrapped with graphene as sulfur host for high-performance lithium-sulfur batteries

NASA Astrophysics Data System (ADS)

Zhang, Yongzheng; Sun, Kai; Liang, Zhan; Wang, Yanli; Ling, Licheng

2018-01-01

N-doped yolk-shell hollow carbon sphere wrapped with reduced graphene oxide (rGO/N-YSHCS) is designed and fabricated as sulfur host for lithium-sulfur batteries. The shuttle effect of polysulfides can be suppressed effectively by the porous yolk-shell structure, graphene layer and N-doping. A good conductivity network is provided for electron transportation through the graphene layer coupled with the unique yolk-shell carbon matrix. Such unique structure offers the synthesized rGO/N-YSHCS/S electrode with a high reversible capacity (800 mAh g-1 at 0.2 C after 100 cycles) and good high-rate capability (636 mAh g-1 at 1 C and 540 mAh g-1 at 2 C).

Government Activities to Detect, Deter and Disrupt Threats Enumerating from the Dark Web

DTIC Science & Technology

2017-06-09

the surface selling web website, the Silk Road site offered a variety of illegal goods and served as a grant for the customer transaction. The...order to degrade human prosperity. Tor network, besides offering legal anonymity, services is an infrastructure for illicit online services which are... customer ordered illegal goods from the website located on the dark web and paid in Bitcoins. The money stays on the site wallet until the customer

The mid-IR silicon photonics sensor platform (Conference Presentation)

NASA Astrophysics Data System (ADS)

Kimerling, Lionel; Hu, Juejun; Agarwal, Anuradha M.

2017-02-01

Advances in integrated silicon photonics are enabling highly connected sensor networks that offer sensitivity, selectivity and pattern recognition. Cost, performance and the evolution path of the so-called `Internet of Things' will gate the proliferation of these networks. The wavelength spectral range of 3-8um, commonly known as the mid-IR, is critical to specificity for sensors that identify materials by detection of local vibrational modes, reflectivity and thermal emission. For ubiquitous sensing applications in this regime, the sensors must move from premium to commodity level manufacturing volumes and cost. Scaling performance/cost is critically dependent on establishing a minimum set of platform attributes for point, wearable, and physical sensing. Optical sensors are ideal for non-invasive applications. Optical sensor device physics involves evanescent or intra-cavity structures for applied to concentration, interrogation and photo-catalysis functions. The ultimate utility of a platform is dependent on sample delivery/presentation modalities; system reset, recalibration and maintenance capabilities; and sensitivity and selectivity performance. The attributes and performance of a unified Glass-on-Silicon platform has shown good prospects for heterogeneous integration on materials and devices using a low cost process flow. Integrated, single mode, silicon photonic platforms offer significant performance and cost advantages, but they require discovery and qualification of new materials and process integration schemes for the mid-IR. Waveguide integrated light sources based on rare earth dopants and Ge-pumped frequency combs have promise. Optical resonators and waveguide spirals can enhance sensitivity. PbTe materials are among the best choices for a standard, waveguide integrated photodetector. Chalcogenide glasses are capable of transmitting mid-IR signals with high transparency. Integrated sensor case studies of i) high sensitivity analyte detection in solution; ii) gas sensing in air and iii) on-chip spectrometry provide good insight into the tradeoffs being made en route to ubiquitous sensor deployment in an Internet of Things.

Hypersonic Inlet for a Laser Powered Propulsion System

NASA Astrophysics Data System (ADS)

Harrland, Alan; Doolan, Con; Wheatley, Vincent; Froning, Dave

2011-11-01

Propulsion within the lightcraft concept is produced via laser induced detonation of an incoming hypersonic air stream. This process requires suitable engine configurations that offer good performance over all flight speeds and angles of attack to ensure the required thrust is maintained. Stream traced hypersonic inlets have demonstrated the required performance in conventional hydrocarbon fuelled scramjet engines, and has been applied to the laser powered lightcraft vehicle. This paper will outline the current methodology employed in the inlet design, with a particular focus on the performance of the lightcraft inlet at angles of attack. Fully three-dimensional turbulent computational fluid dynamics simulations have been performed on a variety of inlet configurations. The performance of the lightcraft inlets have been evaluated at differing angles of attack. An idealized laser detonation simulation has also been performed to validate that the lightcraft inlet does not unstart during the laser powered propulsion cycle.

The place of reconstructive tubal surgery in the era of assisted reproductive techniques.

PubMed

Gomel, Victor

2015-12-01

Assisted reproductive techniques yield high rates of success for women with tubal factor infertility. Because they are potentially effective for all categories of infertility, for two decades, clinical and basic research in infertility has been focused on IVF techniques and outcomes, rather than developing surgical techniques or training infertility subspecialists in tubal microsurgery. Nonetheless, in comparison with IVF, reconstructive tubal surgery is inexpensive and offers multiple opportunities to attempt conception. Performing laparoscopic salpingostomy prior to IVF in women with good prognosis tubal disease may improve the outcome of subsequent IVF, while offering the potential for spontaneous conception. Tubo-tubal anastomosis for reversal of tubal ligation, performed either by a microsurgical technique through a mini-laparotomy or by laparoscopy, is preferable to IVF in younger women with no other fertility factors, because it offers potentially higher cumulative pregnancy rates. Surgery is the only alternative for women with tubal factor infertility who for personal or other reasons are unable to undergo assisted reproductive techniques. Tubal reconstructive surgery and assisted reproductive techniques must be considered complementary forms of treatment for women with tubal factor infertility, and training in tubal reconstructive surgery should be an integral part of subspecialty training in reproductive endocrinology and infertility. Copyright © 2015 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Rx for low cash yields.

PubMed

Tobe, Chris

2003-10-01

Certain strategies can offer not-for-profit hospitals potentially greater investment yields while maintaining stability and principal safety. Treasury inflation-indexed securities can offer good returns, low volatility, and inflation protection. "Enhanced cash" strategies offer liquidity and help to preserve capital. Stable value "wrappers" allow hospitals to pursue higher-yielding fixed-income securities without an increase in volatility.

"Good Citizen" Program.

ERIC Educational Resources Information Center

Placer Hills Union Elementary School District, Meadow Vista, CA.

THE FOLLOWING IS THE FULL TEXT OF THIS DOCUMENT: The "Good Citizen" Program was developed for many reasons: to keep the campus clean, to reward students for improvement, to reward students for good deeds, to improve the total school climate, to reward students for excellence, and to offer staff members a method of reward for positive…

Hospitals as health educators

MedlinePlus

... offer discounts to healthy activities in the area: Biking, hiking, or walking tours Museums Fitness clubs Farms Festivals Your hospital may offer discounts for: Retail stores such as sporting goods, health food, and art stores Acupuncture Skin care Eye ...

Multifunctional Wearable Electronic Textiles Using Cotton Fibers with Polypyrrole and Carbon Nanotubes.

PubMed

Lima, Ravi M A P; Alcaraz-Espinoza, Jose Jarib; da Silva, Fernando A G; de Oliveira, Helinando P

2018-04-25

Multifunctional wearable electronic textiles based on interfacial polymerization of polypyrrole on carbon nanotubes/cotton fibers offer advantages of simple and low-cost materials that incorporate bactericidal, good electrochemical performance, and electrical heating properties. The high conductivity of doped polypyrrole/CNT composite provides textiles that reaches temperature on order of 70 °C with field of 5 V/cm, superior electrochemical performance applied as electrodes of supercapacitor prototypes, reaching capacitance in order of 30 F g -1 and strong bactericidal activity against Staphylococcus aureus. The combination of these properties can be explored in smart devices for heat and microbial treatment on different parts of body, with incorporated storage of energy on textiles.

Fluoroalkylated Silicon-Containing Surfaces - Estimation of Solid Surface Energy

DTIC Science & Technology

2010-10-20

surface tension liquids such as octane (γlv = 21.6 mN/m) and methanol (γlv = 22.7 mN/m), requires an appropriately chosen surface micro/nano-texture in...addition to a low solid surface energy (γsv). 1H,1H,2H,2H- Heptadecafluorodecyl polyhedral oligomeric silsesquioxane (fluorodecyl POSS) offers one of...27.5 mN/m), while Girifalco-Good analysis was performed using a set of polar and non-polar liquids with a wider range of liquid surface tension (15.5

In Search of Good Counsel.

ERIC Educational Resources Information Center

Tanner-Otts, Virginia

1995-01-01

School attorneys interpret state and federal laws, head off expensive lawsuits, and defend their districts aggressively in court. Offers advice on how to find and keep a good attorney. Contains a sample advertisement for the position. (MLF)

Carbon Cathodes in Rechargeable Lithium-Oxygen Batteries Based on Double-Lithium-Salt Electrolytes.

PubMed

Yoo, Eunjoo; Zhou, Haoshen

2016-06-08

The use of carbon materials as air electrodes in lithium-oxygen (Li-O2 ) batteries is known to be advantageous owing to their good conductivity and because they offer sites suitable for the reversible electrode reactions. However, the exact influence of carbon materials on the electrochemical performance of Li-O2 batteries is not clear. In this study the electrochemical performance of four different types of carbon materials (multiwalled carbon nanotubes (MWCNTs), CMK-3, graphene nanosheets (GNSs), and Ketjen Black (KB)) as air electrodes is examined. We find that a Li-O2 cell based on an electrode of multiwalled carbon nanotubes (MWCNTs) demonstrates good rate performance and cycle stability, when using LiNO3 -LiTFSI/DMSO as electrolyte. Li-O2 cells based on such MWCNT electrodes, with a cut-off capacity of 1000 mAh g(-1) at 500 mA g(-1) , can undergo around 90 cycles without obvious losses of capacity. Even when the discharge depth is increased to 2000 mA h g(-1) , stable cycling is maintained for 45 cycles at a charge potential below 4.0 V. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

High Temperature Stable Separator for Lithium Batteries Based on SiO2 and Hydroxypropyl Guar Gum

PubMed Central

Carvalho, Diogo Vieira; Loeffler, Nicholas; Kim, Guk-Tae; Passerini, Stefano

2015-01-01

A novel membrane based on silicon dioxide (SiO2) and hydroxypropyl guar gum (HPG) as binder is presented and tested as a separator for lithium-ion batteries. The separator is made with renewable and low cost materials and an environmentally friendly manufacturing processing using only water as solvent. The separator offers superior wettability and high electrolyte uptake due to the optimized porosity and the good affinity of SiO2 and guar gum microstructure towards organic liquid electrolytes. Additionally, the separator shows high thermal stability and no dimensional-shrinkage at high temperatures due to the use of the ceramic filler and the thermally stable natural polymer. The electrochemical tests show the good electrochemical stability of the separator in a wide range of potential, as well as its outstanding cycle performance. PMID:26512701

Performance evaluation of the Trans-PET® BioCaliburn® LH system: a large FOV small-animal PET system

NASA Astrophysics Data System (ADS)

Wang, Luyao; Zhu, Jun; Liang, Xiao; Niu, Ming; Wu, Xiaoke; Kao, Chien-Min; Kim, Heejong; Xie, Qingguo

2015-01-01

The Trans-PET® BioCaliburn® LH is a commercial positron emission tomography (PET) system for animal imaging. The system offers a large transaxial field-of-view (FOV) of 13.0 cm to allow imaging of multiple rodents or larger animals. This paper evaluates and reports the performance characteristics of this system. Methods: in this paper, the system was evaluated for its spatial resolutions, sensitivity, scatter fraction, count rate performance and image quality in accordance with the National Electrical Manufacturers Association (NEMA) NU-4 2008 specification with modifications. Phantoms and animals not specified in the NEMA specification were also scanned to provide further demonstration of its imaging capability. Results: the spatial resolution is 1.0 mm at the center. When using a 350-650 keV energy window and a 5 ns coincidence time window, the sensitivity at the center is 2.04%. The noise equivalent count-rate curve reaches a peak value of 62 kcps at 28 MBq for the mouse-sized phantom and a peak value of 25 kcps at 31 MBq for the rat-sized phantom. The scatter fractions are 8.4% and 17.7% for the mouse- and rat-sized phantoms, respectively. The uniformity and recovery coefficients measured by using the NEMA image-quality phantom both indicate good imaging performance, even though the reconstruction algorithm provided by the vendor does not implement all desired corrections. The Derenzo-phantom images show that the system can resolve 1.0 mm diameter rods. Animal studies demonstrate the capabilities of the system in dynamic imaging and to image multiple rodents. Conclusion: the Trans-PET® BioCaliburn® LH system offers high spatial resolution, a large transaixal FOV and adequate sensitivity. It produces animal images of good quality and supports dynamic imaging. The system is an attractive imaging technology for preclinical research.

Diagnostic performance of a Lattice Boltzmann-based method for CT-based fractional flow reserve.

PubMed

Giannopoulos, Andreas A; Tang, Anji; Ge, Yin; Cheezum, Michael K; Steigner, Michael L; Fujimoto, Shinichiro; Kumamaru, Kanako K; Chiappino, Dante; Della Latta, Daniele; Berti, Sergio; Chiappino, Sara; Rybicki, Frank J; Melchionna, Simone; Mitsouras, Dimitrios

2018-02-20

Fractional flow reserve (FFR) estimated from coronary computed tomography angiography (CT-FFR) offers non-invasive detection of lesion-specific ischaemia. We aimed to develop and validate a fast CT-FFR algorithm utilising the Lattice Boltzmann method for blood flow simulation (LBM CT-FFR). Sixty-four patients with clinically indicated CTA and invasive FFR measurement from three institutions were retrospectively analysed. CT-FFR was performed using an onsite tool interfacing with a commercial Lattice Boltzmann fluid dynamics cloud-based platform. Diagnostic accuracy of LBM CT-FFR ≤0.8 and percent diameter stenosis >50% by CTA to detect invasive FFR ≤0.8 were compared using area under the receiver operating characteristic curve (AUC). Sixty patients successfully underwent LBM CT-FFR analysis; 29 of 73 lesions in 69 vessels had invasive FFR ≤0.8. Total time to perform LBM CT-FFR was 40±10 min. Compared to invasive FFR, LBM CT-FFR had good correlation (r=0.64), small bias (0.009) and good limits of agreement (-0.223 to 0.206). The AUC of LBM CT-FFR (AUC=0.894, 95% confidence interval [CI]: 0.792-0.996) was significantly higher than CTA (AUC=0.685, 95% CI: 0.576-0.794) to detect FFR ≤0.8 (p=0.0021). Per-lesion specificity, sensitivity, and accuracy of LBM CT-FFR were 97.7%, 79.3%, and 90.4%, respectively. LBM CT-FFR has very good diagnostic accuracy to detect lesion-specific ischaemia (FFR ≤0.8) and can be performed in less than one hour.

Comparison of Portable and Bench-Top Spectrometers for Mid-Infrared Diffuse Reflectance Measurements of Soils.

PubMed

Hutengs, Christopher; Ludwig, Bernard; Jung, András; Eisele, Andreas; Vohland, Michael

2018-03-27

Mid-infrared (MIR) spectroscopy has received widespread interest as a method to complement traditional soil analysis. Recently available portable MIR spectrometers additionally offer potential for on-site applications, given sufficient spectral data quality. We therefore tested the performance of the Agilent 4300 Handheld FTIR (DRIFT spectra) in comparison to a Bruker Tensor 27 bench-top instrument in terms of (i) spectral quality and measurement noise quantified by wavelet analysis; (ii) accuracy of partial least squares (PLS) calibrations for soil organic carbon (SOC), total nitrogen (N), pH, clay and sand content with a repeated cross-validation analysis; and (iii) key spectral regions for these soil properties identified with a Monte Carlo spectral variable selection approach. Measurements and multivariate calibrations with the handheld device were as good as or slightly better than Bruker equipped with a DRIFT accessory, but not as accurate as with directional hemispherical reflectance (DHR) data collected with an integrating sphere. Variations in noise did not markedly affect the accuracy of multivariate PLS calibrations. Identified key spectral regions for PLS calibrations provided a good match between Agilent and Bruker DHR data, especially for SOC and N. Our findings suggest that portable FTIR instruments are a viable alternative for MIR measurements in the laboratory and offer great potential for on-site applications.

Auctions to Reinforce Understanding

ERIC Educational Resources Information Center

Flores, Haynet Rivera

2018-01-01

An auction is a process of buying and selling goods or services by offering them up for bid, taking bids, and then selling each good or service to the highest bidder. Participants bid openly against one another; each bid must be higher than the previous bid. In the activity described rather than goods or services, English teachers sell sentences!…

16 CFR 310.4 - Abusive telemarketing acts or practices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... receipt of a customer's or donor's billing information to process a payment for goods or services or a... of the seller whose goods or services are being offered or made on behalf of the charitable...)(4)(iii), unless: (A) in any such call to induce the purchase of any good or service, the seller has...

Quality and adequacy of training of expanded function dental auxiliaries in the U.S. Army.

PubMed

Chisick, M C

1994-08-01

This study explores the quality and adequacy of training U.S. Army expanded function dental auxiliaries (X2s). Data were collected in the spring of 1989 using self-administered questionnaires from dental commanders, clinic chiefs, X2 graduates, dentists working with X2s, and potential X2 students. Nearly all (94.2%) dental activities personnel responded. Results show overall performance of X2s was rated excellent or very good by 76% of commanders, 70% of clinic chiefs, and 42% of dentists. Of 23 job-specific tasks assessed, X2s received lowest performance ratings for placement of complex composite restorations and highest ratings for individual topical fluoride application. Of X2 graduates, 82% rated the overall quality of X2 training as very good or excellent. X2 graduates and their supervisors recommend retaining each job-specific skill in the X2 training program while lengthening the program from 16 to 28-30 weeks. Training of U.S. Army X2s may offer a model to other dental care systems with limited resources.

Synergistic effects from graphene and carbon nanotubes endow ordered hierarchical structure foams with a combination of compressibility, super-elasticity and stability and potential application as pressure sensors.

PubMed

Kuang, Jun; Dai, Zhaohe; Liu, Luqi; Yang, Zhou; Jin, Ming; Zhang, Zhong

2015-01-01

Nanostructured carbon material based three-dimensional porous architectures have been increasingly developed for various applications, e.g. sensors, elastomer conductors, and energy storage devices. Maintaining architectures with good mechanical performance, including elasticity, load-bearing capacity, fatigue resistance and mechanical stability, is prerequisite for realizing these functions. Though graphene and CNT offer opportunities as nanoscale building blocks, it still remains a great challenge to achieve good mechanical performance in their microarchitectures because of the need to precisely control the structure at different scales. Herein, we fabricate a hierarchical honeycomb-like structured hybrid foam based on both graphene and CNT. The resulting materials possess excellent properties of combined high specific strength, elasticity and mechanical stability, which cannot be achieved in neat CNT and graphene foams. The improved mechanical properties are attributed to the synergistic-effect-induced highly organized, multi-scaled hierarchical architectures. Moreover, with their excellent electrical conductivity, we demonstrated that the hybrid foams could be used as pressure sensors in the fields related to artificial skin.

Physician Rating Websites: What Aspects Are Important to Identify a Good Doctor, and Are Patients Capable of Assessing Them? A Mixed-Methods Approach Including Physicians' and Health Care Consumers' Perspectives.

PubMed

Rothenfluh, Fabia; Schulz, Peter J

2017-05-01

Physician rating websites (PRWs) offer health care consumers the opportunity to evaluate their doctor anonymously. However, physicians' professional training and experience create a vast knowledge gap in medical matters between physicians and patients. This raises ethical concerns about the relevance and significance of health care consumers' evaluation of physicians' performance. To identify the aspects physician rating websites should offer for evaluation, this study investigated the aspects of physicians and their practice relevant for identifying a good doctor, and whether health care consumers are capable of evaluating these aspects. In a first step, a Delphi study with physicians from 4 specializations was conducted, testing various indicators to identify a good physician. These indicators were theoretically derived from Donabedian, who classifies quality in health care into pillars of structure, process, and outcome. In a second step, a cross-sectional survey with health care consumers in Switzerland (N=211) was launched based on the indicators developed in the Delphi study. Participants were asked to rate the importance of these indicators to identify a good physician and whether they would feel capable to evaluate those aspects after the first visit to a physician. All indicators were ordered into a 4×4 grid based on evaluation and importance, as judged by the physicians and health care consumers. Agreement between the physicians and health care consumers was calculated applying Holsti's method. In the majority of aspects, physicians and health care consumers agreed on what facets of care were important and not important to identify a good physician and whether patients were able to evaluate them, yielding a level of agreement of 74.3%. The two parties agreed that the infrastructure, staff, organization, and interpersonal skills are both important for a good physician and can be evaluated by health care consumers. Technical skills of a doctor and outcomes of care were also judged to be very important, but both parties agreed that they would not be evaluable by health care consumers. Health care consumers in Switzerland show a high appraisal of the importance of physician-approved criteria for assessing health care performance and a moderate self-perception of how capable they are of assessing the quality and performance of a physician. This study supports that health care consumers are differentiating between aspects they perceive they would be able to evaluate after a visit to a physician (such as attributes of structure and the interpersonal skills of a doctor), and others that lay beyond their ability to make an accurate judgment about (such as technical skills of a physician and outcome of care). ©Fabia Rothenfluh, Peter J Schulz. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 01.05.2017.

Exploring the Free Energy Landscape of Solutes Embedded in Lipid Bilayers.

PubMed

Jämbeck, Joakim P M; Lyubartsev, Alexander P

2013-06-06

Free energy calculations are vital for our understanding of biological processes on an atomistic scale and can offer insight to various mechanisms. However, in some cases, degrees of freedom (DOFs) orthogonal to the reaction coordinate have high energy barriers and/or long equilibration times, which prohibit proper sampling. Here we identify these orthogonal DOFs when studying the transfer of a solute from water to a model membrane. Important DOFs are identified in bulk liquids of different dielectric nature with metadynamics simulations and are used as reaction coordinates for the translocation process, resulting in two- and three-dimensional space of reaction coordinates. The results are in good agreement with experiments and elucidate the pitfalls of using one-dimensional reaction coordinates. The calculations performed here offer the most detailed free energy landscape of solutes embedded in lipid bilayers to date and show that free energy calculations can be used to study complex membrane translocation phenomena.

High-throughput state-machine replication using software transactional memory.

PubMed

Zhao, Wenbing; Yang, William; Zhang, Honglei; Yang, Jack; Luo, Xiong; Zhu, Yueqin; Yang, Mary; Luo, Chaomin

2016-11-01

State-machine replication is a common way of constructing general purpose fault tolerance systems. To ensure replica consistency, requests must be executed sequentially according to some total order at all non-faulty replicas. Unfortunately, this could severely limit the system throughput. This issue has been partially addressed by identifying non-conflicting requests based on application semantics and executing these requests concurrently. However, identifying and tracking non-conflicting requests require intimate knowledge of application design and implementation, and a custom fault tolerance solution developed for one application cannot be easily adopted by other applications. Software transactional memory offers a new way of constructing concurrent programs. In this article, we present the mechanisms needed to retrofit existing concurrency control algorithms designed for software transactional memory for state-machine replication. The main benefit for using software transactional memory in state-machine replication is that general purpose concurrency control mechanisms can be designed without deep knowledge of application semantics. As such, new fault tolerance systems based on state-machine replications with excellent throughput can be easily designed and maintained. In this article, we introduce three different concurrency control mechanisms for state-machine replication using software transactional memory, namely, ordered strong strict two-phase locking, conventional timestamp-based multiversion concurrency control, and speculative timestamp-based multiversion concurrency control. Our experiments show that speculative timestamp-based multiversion concurrency control mechanism has the best performance in all types of workload, the conventional timestamp-based multiversion concurrency control offers the worst performance due to high abort rate in the presence of even moderate contention between transactions. The ordered strong strict two-phase locking mechanism offers the simplest solution with excellent performance in low contention workload, and fairly good performance in high contention workload.

High-throughput state-machine replication using software transactional memory

PubMed Central

Yang, William; Zhang, Honglei; Yang, Jack; Luo, Xiong; Zhu, Yueqin; Yang, Mary; Luo, Chaomin

2017-01-01

State-machine replication is a common way of constructing general purpose fault tolerance systems. To ensure replica consistency, requests must be executed sequentially according to some total order at all non-faulty replicas. Unfortunately, this could severely limit the system throughput. This issue has been partially addressed by identifying non-conflicting requests based on application semantics and executing these requests concurrently. However, identifying and tracking non-conflicting requests require intimate knowledge of application design and implementation, and a custom fault tolerance solution developed for one application cannot be easily adopted by other applications. Software transactional memory offers a new way of constructing concurrent programs. In this article, we present the mechanisms needed to retrofit existing concurrency control algorithms designed for software transactional memory for state-machine replication. The main benefit for using software transactional memory in state-machine replication is that general purpose concurrency control mechanisms can be designed without deep knowledge of application semantics. As such, new fault tolerance systems based on state-machine replications with excellent throughput can be easily designed and maintained. In this article, we introduce three different concurrency control mechanisms for state-machine replication using software transactional memory, namely, ordered strong strict two-phase locking, conventional timestamp-based multiversion concurrency control, and speculative timestamp-based multiversion concurrency control. Our experiments show that speculative timestamp-based multiversion concurrency control mechanism has the best performance in all types of workload, the conventional timestamp-based multiversion concurrency control offers the worst performance due to high abort rate in the presence of even moderate contention between transactions. The ordered strong strict two-phase locking mechanism offers the simplest solution with excellent performance in low contention workload, and fairly good performance in high contention workload. PMID:29075049

Hydrophobic asymmetric ultrafiltration PVDF membranes: an alternative separator for VFB with excellent stability.

PubMed

Wei, Wenping; Zhang, Huamin; Li, Xianfeng; Zhang, Hongzhang; Li, Yun; Vankelecom, Ivo

2013-02-14

Polyvinylidene fluoride (PVDF) ultrafiltration membranes were investigated for the first time in vanadium redox flow battery (VFB) applications. Surprisingly, PVDF ultrafiltration membranes with hydrophobic pore walls and relatively large pore sizes of several tens of nanometers proved able to separate vanadium ions and protons efficiently, thus being suitable as a VFB separator. The ion selectivity of this new type of VFB membrane could be tuned readily by controlling the membrane morphology via changes in the composition of the membrane casting solution, and the casting thickness. The results showed that the PVDF membranes offered good performances and excellent stability in VFB applications, where it could, performance-wise, truly substitute Nafion in VFB applications, but at a much lower cost.

Calibration of neural networks using genetic algorithms, with application to optimal path planning

NASA Technical Reports Server (NTRS)

Smith, Terence R.; Pitney, Gilbert A.; Greenwood, Daniel

1987-01-01

Genetic algorithms (GA) are used to search the synaptic weight space of artificial neural systems (ANS) for weight vectors that optimize some network performance function. GAs do not suffer from some of the architectural constraints involved with other techniques and it is straightforward to incorporate terms into the performance function concerning the metastructure of the ANS. Hence GAs offer a remarkably general approach to calibrating ANS. GAs are applied to the problem of calibrating an ANS that finds optimal paths over a given surface. This problem involves training an ANS on a relatively small set of paths and then examining whether the calibrated ANS is able to find good paths between arbitrary start and end points on the surface.

Pay-for-performance: too much of a good thing? A conversation with Martin Roland. Interview by Robert Galvin.

PubMed

Roland, Martin

2006-01-01

As the United States moves down the road of pay-for-performance (P4P), concerns about unintended consequences are foremost in the minds of policymakers. Initial results from the world's most ambitious P4P program, the United Kingdom's Quality and Outcomes Framework (QOF), indicate that while quality improvements exceeded expectations, so too did the amount of funds paid out, straining the National Health Service (NHS) budget. Martin Roland, one of the leading U.K. health services researchers and an adviser to the QOF, gives his views on what went right and what went wrong, and he offers his advice to the United States about using financial incentives to improve quality.

17 CFR 230.260 - Insignificant deviations from a term, condition or requirement of Regulation A.

Code of Federal Regulations, 2010 CFR

2010-04-01

... for any offer or sale to a particular individual or entity, if the person relying on the exemption... respect to the offering as a whole, provided that any failure to comply with paragraphs (a), (b), (d) (1) and (3) Of § 230.251 shall be deemed to be significant to the offering as a whole; and (3) A good...

17 CFR 230.260 - Insignificant deviations from a term, condition or requirement of Regulation A.

Code of Federal Regulations, 2013 CFR

2013-04-01

... for any offer or sale to a particular individual or entity, if the person relying on the exemption... respect to the offering as a whole, provided that any failure to comply with paragraphs (a), (b), (d) (1) and (3) Of § 230.251 shall be deemed to be significant to the offering as a whole; and (3) A good...

17 CFR 230.260 - Insignificant deviations from a term, condition or requirement of Regulation A.

Code of Federal Regulations, 2012 CFR

2012-04-01

... for any offer or sale to a particular individual or entity, if the person relying on the exemption... respect to the offering as a whole, provided that any failure to comply with paragraphs (a), (b), (d) (1) and (3) Of § 230.251 shall be deemed to be significant to the offering as a whole; and (3) A good...

17 CFR 230.260 - Insignificant deviations from a term, condition or requirement of Regulation A.

Code of Federal Regulations, 2011 CFR

2011-04-01

... for any offer or sale to a particular individual or entity, if the person relying on the exemption... respect to the offering as a whole, provided that any failure to comply with paragraphs (a), (b), (d) (1) and (3) Of § 230.251 shall be deemed to be significant to the offering as a whole; and (3) A good...

Applied Cognitive Models of Behavior and Errors Patterns

DTIC Science & Technology

2017-09-01

methods offer an opportunity to deliver good , effective introductory and basic training , thus potentially enabling a single human instructor to train ...emergency medical technician (EMT) domain, which offers a standardized curriculum on which we can create training scenarios. 2. Develop...complexity of software integration and limited access to physical devices can result in commitment to a de- sign that turns out to not offer many training

Design and analysis of a direct-drive wind power generator with ultra-high torque density

NASA Astrophysics Data System (ADS)

Jian, Linni; Shi, Yujun; Wei, Jin; Zheng, Yanchong

2015-05-01

In order to get rid of the nuisances caused by mechanical gearboxes, generators with low rated speed, which can be directly connected to wind turbines, are attracting increasing attention. The purpose of this paper is to propose a new direct-drive wind power generator (DWPG), which can offer ultra-high torque density. First, magnetic gear (MG) is integrated to achieve non-contact torque transmission and speed variation. Second, armature windings are engaged to achieve electromechanical energy conversion. Interior permanent magnet (PM) design on the inner rotor is adopted to boost the torque transmission capability of the integrated MG. Nevertheless, due to lack of back iron on the stator, the proposed generator does not exhibit prominent salient feature, which usually exists in traditional interior PM (IPM) machines. This makes it with good controllability and high power factor as the surface-mounted permanent magnet machines. The performance is analyzed using finite element method. Investigation on the magnetic field harmonics demonstrates that the permanent-magnetic torque offered by the MG can work together with the electromagnetic torque offered by the armature windings to balance the driving torque captured by the wind turbine. This allows the proposed generator having the potential to offer even higher torque density than its integrated MG.

Personality traits measured at baseline can predict academic performance in upper secondary school three years late.

PubMed

Rosander, Pia; Bäckström, Martin

2014-12-01

The aim of the present study was to explore the ability of personality to predict academic performance in a longitudinal study of a Swedish upper secondary school sample. Academic performance was assessed throughout a three-year period via final grades from the compulsory school and upper secondary school. The Big Five personality factors (Costa & McCrae, ) - particularly Conscientiousness and Neuroticism - were found to predict overall academic performance, after controlling for general intelligence. Results suggest that Conscientiousness, as measured at the age of 16, can explain change in academic performance at the age of 19. The effect of Neuroticism on Conscientiousness indicates that, as regarding getting good grades, it is better to be a bit neurotic than to be stable. The study extends previous work by assessing the relationship between the Big Five and academic performance over a three-year period. The results offer educators avenues for improving educational achievement. © 2014 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

[Challenges in the organization of investigator initiated trials: in transplantation medicine].

PubMed

Schnitzbauer, A A; Lamby, P E; Mutzbauer, I; von Hassel, J; Geissler, E K; Schlitt, H J

2011-03-01

Transplantation medicine offers multiple translational questions which should preferably be transferred to clinical evidence. The current gold standard for testing such questions and hypotheses is by prospective randomized controlled trials (RCT). The trials should be performed independently from the medical industry to avoid conflicts of interests and to guarantee a strict scientific approach. A good model is an investigator initiated trial (IIT) in which academic institutions function as the sponsor and in which normally a scientific idea stands before marketing interests of a certain medical product. We present a model for an IIT which is sponsored and coordinated by Regensburg University Hospital at 45 sites in 13 nations (SiLVER study), highlight special pitfalls of this study and offer alternatives to this approach. Finances: financial support in clinical trials can be obtained from the medical industry. Alternatively in Germany the Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung) offers annual grants. The expansion of financial support through foundations is desirable. Infrastructure: sponsorship within the pharmaceutics act (Arzneimittelgesetz) demands excellent infrastructural conditions and a professional team to accomplish clinical, logistic, regulatory, legal and ethical challenges in a RCT. If a large trial has sufficient financial support certain tasks can be outsourced and delegated to contract research organizations, coordinating centers for clinical trials or partners in the medical industry. Clinical scientific advances to improve evidence are an enormous challenge when performed as an IIT. However, academic sponsors can perform (international) IITs when certain rules are followed and should be defined as the gold standard when scientific findings have to be established clinically.

Making better scientific figures

NASA Astrophysics Data System (ADS)

Hawkins, Ed; McNeall, Doug

2016-04-01

In the words of the UK government chief scientific adviser "Science is not finished until it's communicated" (Walport 2013). The tools to produce good visual communication have never been so easily accessible to scientists as at the present. Correspondingly, it has never been easier to produce and disseminate poor graphics. In this presentation, we highlight some good practice and offer some practical advice in preparing scientific figures for presentation to peers or to the public. We identify common mistakes in visualisation, including some made by the authors, and offer some good reasons not to trust defaults in graphics software. In particular, we discuss the use of colour scales and share our experiences in running a social media campaign (http://tiny.cc/endrainbow) to replace the "rainbow" (also "jet", or "spectral") colour scale as the default in (climate) scientific visualisation.

Good Deeds That Are Most Punished, Part 1: Teaching

ERIC Educational Resources Information Center

Perlmutter, David D.

2012-01-01

High on any Top 10 list of the most frequent advice offered to young faculty members is this: No good deed goes unpunished. The aphorism at first seems cynical, pessimistic, dysfunctional. Doing good, as members of a higher-education community, is their job. What if everyone just looked out for No. 1? The entire promotion-and-tenure system--which…

In Your View: What Is a Good Science Teacher?

ERIC Educational Resources Information Center

Piggott, Andy

2014-01-01

Search the Internet for the qualities of a good teacher and you'll find that an entire range of ideas are offered. Having spent half a working life as a science teacher and the remainder as a science education consultant (and, for a period, an Ofsted team inspector!), the author would like to attempt to tease out what makes a "good science…

Good practices in free-energy calculations.

PubMed

Pohorille, Andrew; Jarzynski, Christopher; Chipot, Christophe

2010-08-19

As access to computational resources continues to increase, free-energy calculations have emerged as a powerful tool that can play a predictive role in a wide range of research areas. Yet, the reliability of these calculations can often be improved significantly if a number of precepts, or good practices, are followed. Although the theory upon which these good practices rely has largely been known for many years, it is often overlooked or simply ignored. In other cases, the theoretical developments are too recent for their potential to be fully grasped and merged into popular platforms for the computation of free-energy differences. In this contribution, the current best practices for carrying out free-energy calculations using free energy perturbation and nonequilibrium work methods are discussed, demonstrating that at little to no additional cost, free-energy estimates could be markedly improved and bounded by meaningful error estimates. Monitoring the probability distributions that underlie the transformation between the states of interest, performing the calculation bidirectionally, stratifying the reaction pathway, and choosing the most appropriate paradigms and algorithms for transforming between states offer significant gains in both accuracy and precision.

FRD and scrambling properties of recent non-circular fibres

NASA Astrophysics Data System (ADS)

Avila, Gerardo

2012-09-01

Optical fibres with octagonal, square and rectangular core shapes have been proposed as alternative to the circular fibres to link the telescopes to spectrographs in order to increase the accuracy of radial velocity measurements. Theoretically they offer better scrambling properties than their circular counterparts. First commercial octagonal fibres provided good near field scrambling gains. Unfortunately the far field scrambling did not show important figures. This article shows test results on new fibres from CeramOptec. The measurements show substantial improvements of the far field scrambling gains. In addition, evaluation of their focal ratio degradation (FRD) shows much better performances than previous fibres.

Computer-aided design studies of the homopolar linear synchronous motor

NASA Astrophysics Data System (ADS)

Dawson, G. E.; Eastham, A. R.; Ong, R.

1984-09-01

The linear induction motor (LIM), as an urban transit drive, can provide good grade-climbing capabilities and propulsion/braking performance that is independent of steel wheel-rail adhesion. In view of its 10-12 mm airgap, the LIM is characterized by a low power factor-efficiency product of order 0.4. A synchronous machine offers high efficiency and controllable power factor. An assessment of the linear homopolar configuration of this machine is presented as an alternative to the LIM. Computer-aided design studies using the finite element technique have been conducted to identify a suitable machine design for urban transit propulsion.

Eco-Contribution for the Production of N-Arylnitrones: Solvent-Free and Assisted by Microwaves

PubMed Central

Reyes, Leonor; Corona, Sandra; Arroyo, Gabriel; Delgado, Francisco; Miranda, René

2010-01-01

A simple green approach for the production of benzylideneaniline oxides is offered. This contribution was performed via the condensation of phenylhydroxylamine with several aryl aldehydes, in the absence of both catalyst and solvent, and using microwave irradiation as the activating reaction mode. In addition, good yields of the products were achieved in a short time. It is also worth noting that the work-up procedure is simple and the products do not require further purification. Finally, an interesting comparison without the use of microwave irradiation is also discussed. PMID:20640169

Multiscale Rotation-Invariant Convolutional Neural Networks for Lung Texture Classification.

PubMed

Wang, Qiangchang; Zheng, Yuanjie; Yang, Gongping; Jin, Weidong; Chen, Xinjian; Yin, Yilong

2018-01-01

We propose a new multiscale rotation-invariant convolutional neural network (MRCNN) model for classifying various lung tissue types on high-resolution computed tomography. MRCNN employs Gabor-local binary pattern that introduces a good property in image analysis-invariance to image scales and rotations. In addition, we offer an approach to deal with the problems caused by imbalanced number of samples between different classes in most of the existing works, accomplished by changing the overlapping size between the adjacent patches. Experimental results on a public interstitial lung disease database show a superior performance of the proposed method to state of the art.

Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices.

PubMed

Huang, Fei; Wu, Hongbin; Cao, Yong

2010-07-01

Water/alcohol soluble conjugated polymers (WSCPs) can be processed from water or other polar solvents, which offer good opportunities to avoid interfacial mixing upon fabrication of multilayer polymer optoelectronic devices by solution processing, and can dramatically improve charge injection from high work-function metal cathode resulting in greatly enhancement of the device performance. In this critical review, the authors provide a brief review of recent developments in this field, including the materials design, functional principles, and their unique applications as interface modification layer in solution-processable multilayer optoelectronic devices (135 references).

Electron beam curing — taking good ideas to the manufacturing floor

NASA Astrophysics Data System (ADS)

Saunders, C.; Lopata, V.; Barnard, J.; Stepanik, T.

2000-03-01

Acsion is exploiting several emerging electron beam EB applications ranging from composite curing and repair to viscose manufacturing. EB curing of composite structures offers several advantages: significantly reduced curing times; improvements in part quality and performance; reduced environmental and health concerns; improvements in material handling; and reduced overall manufacturing costs compared to thermal curing. The aerospace industry is developing EB technology in all of their market sectors, including military aviation and space products. Some specific products include cryogenic fuel tanks, improved canopy frames for jet aircraft, and the all-composite military aircraft. This paper discusses each of these opportunities.

Pancreatic adenocarcinoma: why and when should it be resected?

PubMed Central

Ravichandran, D.; Johnson, C. D.

1997-01-01

Adenocarcinoma of the pancreas is a common and dreadful disease with an extremely poor prognosis. In practice, only a few patients are cured but surgical resection, although feasible in less than 20% of patients, offers maximum prolongation of life and provides good palliation of symptoms. This can now be performed safely, even in elderly patients, in specialist units. Better radiological imaging and laparoscopy allow selection of resectable tumours effectively. All patient with pancreatic cancer should now be assessed for surgical resection and potentially suitable patients should be referred to a specialist team at an early stage. Images Figure PMID:9307737

Coupling nanoliter high-performance liquid chromatography to inductively coupled plasma mass spectrometry for arsenic speciation.

PubMed

Cheng, Heyong; Shen, Lihuan; Liu, Jinhua; Xu, Zigang; Wang, Yuanchao

2018-04-01

Nanoliter high-performance liquid chromatography shows low consumption of solvents and samples, offering one of the best choices for arsenic speciation in precious samples in combination with inuctively coupled plasma mass spectrometry. A systematic investigation on coupling nanoliter high-performance liquid chromatography to inductively coupled plasma mass spectrometry from instrument design to injected sample volume and mobile phase was performed in this study. Nanoflow mobile phase was delivered by flow splitting using a conventional high-pressure pump with reuse of mobile phase waste. Dead volume was minimized to 60 nL for the sheathless interface based on the previously developed nanonebulizer. Capillary columns for nanoliter high-performance liquid chromatography were found to be sensitive to sample loading volume. An apparent difference was also found between the mobile phases for nanoliter and conventional high-performance liquid chromatography. Baseline separation of arsenite, arsenate, monomethylarsenic, and dimethylarsenic was achieved within 11 min on a 15 cm C 18 capillary column and within 12 min on a 25 cm strong anion exchange column. Detection limits of 0.9-1.8 μg/L were obtained with precisions variable in the range of 1.6-4.2%. A good agreement between determined and certified values of a certified reference material of human urine (GBW 09115) validated its accuracy along with good recoveries (87-102%). © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

49 CFR 375.201 - What is my normal liability for loss and damage when I accept goods from an individual shipper?

Code of Federal Regulations, 2010 CFR

2010-10-01

...; CONSUMER PROTECTION REGULATIONS Before Offering Services to My Customers Liability Considerations § 375.201... Protection Obligation—In general, your liability is for the household goods that are lost, damaged, destroyed...

Finding the Key to a Good Theatre Program: Some Comments on the ETA Survey.

ERIC Educational Resources Information Center

Hobgood, Burnet M.

1991-01-01

Offers some comments on the Educational Theatre Association's survey on the status of theater in U.S. high schools in the same issue of this journal. Discusses finding the key factors responsible for good school theater. (PRA)

Turning Bad Press into Prestige.

ERIC Educational Resources Information Center

Wassom, Julie

1995-01-01

Offers guidance to childcare directors on handling public and parent relations during crisis situations (e.g., an outbreak of chicken pox, a child's death, or teacher's dismissal for reasons that cannot be disclosed). Recommends keen observation, risk management, and good planning. Offers suggestions for handling the situation before, during, and…

Analysis of anthocyanins in commercial fruit juices by using nano-liquid chromatography-electrospray-mass spectrometry and high-performance liquid chromatography with UV-vis detector.

PubMed

Fanali, Chiara; Dugo, Laura; D'Orazio, Giovanni; Lirangi, Melania; Dachà, Marina; Dugo, Paola; Mondello, Luigi

2011-01-01

Nano-LC and conventional HPLC techniques were applied for the analysis of anthocyanins present in commercial fruit juices using a capillary column of 100 μm id and a 2.1 mm id narrow-bore C(18) column. Analytes were detected by UV-Vis at 518 nm and ESI-ion trap MS with HPLC and nano-LC, respectively. Commercial blueberry juice (14 anthocyanins detected) was used to optimize chromatographic separation of analytes and other analysis parameters. Qualitative identification of anthocyanins was performed by comparing the recorded mass spectral data with those of published papers. The use of the same mobile phase composition in both techniques revealed that the miniaturized method exhibited shorter analysis time and higher sensitivity than narrow-bore chromatography. Good intra-day and day-to-day precision of retention time was obtained in both methods with values of RSD less than 3.4 and 0.8% for nano-LC and HPLC, respectively. Quantitative analysis was performed by external standard curve calibration of cyanidin-3-O-glucoside standard. Calibration curves were linear in the concentration ranges studied, 0.1-50 and 6-50 μg/mL for HPLC-UV/Vis and nano-LC-MS, respectively. LOD and LOQ values were good for both methods. In addition to commercial blueberry juice, qualitative and quantitative analysis of other juices (e.g. raspberry, sweet cherry and pomegranate) was performed. The optimized nano-LC-MS method allowed an easy and selective identification and quantification of anthocyanins in commercial fruit juices; it offered good results, shorter analysis time and reduced mobile phase volume with respect to narrow-bore HPLC. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Technology, recommendation and design: on being a 'paternalistic' philosopher.

PubMed

Wong, Pak-Hang

2013-03-01

Philosophers have talked to each other about moral issues concerning technology, but few of them have talked about issues of technology and the good life, and even fewer have talked about technology and the good life with the public in the form of recommendation. In effect, recommendations for various technologies are often left to technologists and gurus. Given the potential benefits of informing the public on their impacts on the good life, however, this is a curious state of affairs. In the present paper, I will examine why philosophers are seemingly reluctant to offer recommendations to the public. While there are many reasons for philosophers to refrain from offering recommendations, I shall focus on a specific normative reason. More specifically, it appears that, according to a particular definition, offering recommendations can be viewed as paternalistic, and therefore is prima facie wrong to do so. I will provide an argument to show that the worry about paternalism is unfounded, because a form of paternalism engendered by technology is inevitable. Given the inevitability of paternalism, I note that philosophers should accept the duty to offer recommendations to the public. I will then briefly turn to design ethics, which has reconceptualised the role of philosophers and, in my mind, fitted well with the inevitability of paternalism. Finally, I shall argue that design ethics has to be supplemented by the practice of recommendation if it is to sustain its objective.

External fixation of "intertrochanteric" fractures.

PubMed

Gani, Naseem Ul; Kangoo, Khursheed Ahmed; Bashir, Arshad; Muzaffer, Rahil; Bhat, Mohammad Farooq; Farooq, Munir; Badoo, Abdul Rashid; Dar, Imtiyaz Hussian; Wani, Mudassir Maqbool

2009-10-10

In developing countries, due to limited availability of modern anesthesia and overcrowding of the hospitals with patients who need surgery, high-risk patients with "intertrochanteric" fractures remain unsuita ble for open reduction and internal fixation.The aim of this study was to analyze the results of external fixation of "intertrochanteric" fractures in high-risk geriatric patients in a developing country.The results of 62 ambulatory high-risk geriatric patients with a mean age of 70 years (range 58-90 years) with "intertrochanteric" fractures, in whom external fixation was performed, are reported.Eight patients died during follow-up due to medical causes unrelated to the surgical procedure. So only 54 patients were available for final assessment. Procedure is simple, performed under local anesthesia, requires less time for surgery and is associated with less blood loss. Good fixation and early ambulation was achieved in most of the patients. Average time to union was 14 weeks. Thirty-one patients developed superficial pin tract infection and 28 patients had average shortening of 15 mm due to impaction and varus angulation. Functional outcome was assessed using Judet's point system. Good to excellent results were achieved in 44 patients.This study demonstrated that external fixation of "intertrochantric" fractures performed under local anesthesia offers significant advantage in ambulatory high-risk geriatric patients especially in a developing country.

Comprehensive attention to oral health in early childhood: a longitudinal evaluation of the Infant Clinic Program of the Federal University of Rio Grande do Sul, Brazil.

PubMed

Figueiredo, Márcia Cançado; Guarienti, Cinthya Aline D; Michel, Jorge Artur; Sampaio, Mircelei Saldanha

2008-01-01

The Infant Clinic Program believes that oral care should begin within the first days of life in order to guarantee good oral health throughout life; however it has been observed that many dental professionals are not trained attend to this segment of the population. The purpose of the Infant Clinic course is to offer the theoretical and practical knowledge that dentists need to know in order to offer education, prevention and curative treatments, providing comprehensive attention to infants and young children. To evaluate the effectiveness of this Program, a longitudinal study was conducted with the children who participated in the Program during 2004 and 2005. The analysis was performed by first defining the profiles of 303 children before they came to the Infant Clinic, and comparing their oral status in 2004 and at the end of 2005 (12 months, Chi-square test, p < 0.01). Of the 303 children observed in 2004, 72.87% came to the clinic for maintenance of oral health, compared to 14.83% who had caries lesions. During the first clinical examination (2004), it was observed that 57% of the children had good plaque control, while 33% of children had poor or very bad plaque control. After 12 months (2005), an increase in good plaque control was observed in the children (77.28% with good plaque control, and 22.72%poor or very bad plaque control) (p < 0.01). Through the treatment of active lesions, we verified a decrease in active lesions (from 82% to 32%) (p < 0.01). These results show the effectiveness of the program's education, preventive and curative procedures. In addition to the positive experience of the Infant Clinic program, it was concluded that, with the support of treatment and parental education regarding healthy diet and oral hygiene for children, preventive procedures and curative treatment of existing lesions, oral health promotion for very young children was in fact achieved.

Is a share buyback right for your company?

PubMed

Pettit, J

2001-04-01

Contrary to popular wisdom, buybacks don't create value by raising earnings per share. But they do indeed create value, and in two very different ways. First, a buyback sends signals about the company's prospects to the market--hopefully, that prospects are so good that the best investment managers can make right now is in their own company. But investors won't see it that way if other, negative, signals are coming from the company, and it's rarely a good idea for companies in high-growth industries, where investors expect that money to be spent pursuing new opportunities. Second, when financed as a debt issue, a buyback is essentially an exchange of equity for debt, conferring the traditional benefits of leverage--a tax shield and a discipline for managers. For such a buyback to make sense, a company would need to have taxable profits in need of shielding, of course, and be able to predict its future cash flows fairly accurately. Justin Pettit has found that managers routinely underestimate how many shares they need to buy to send a credible signal to the markets, and he offers a way to calculate that number. He also goes through the iterative steps involved in working out how many shares must be purchased to reach a target level of debt. Then he takes a look at the advantages and disadvantages of the three most common ways that companies make the actual purchases--open-market purchases, fixed-price tender offers, and auction-based tender offers. When a company's performance is lagging, a share buyback can look attractive. Unfortunately, a buyback can backfire--unless executives understand why, when, and how to use this powerful and risky tool.

Communicating with Congress

ERIC Educational Resources Information Center

Ochs, Mike

2005-01-01

At a seminar, two Congressional staff members offered good tips on how it is best to communicate with legislators. Although offered in the context of communicating with Congress, these insights are also valuable when working with state and local legislators. This article discusses the key points that were provided in the seminar. In addition to…

76 FR 17451 - Online OSHA Outreach Training Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-29

... must submit an application in order to be considered to offer online Outreach Training Program courses... minimum of 3 years training experience; (b) They each are in good standing (not on probation, suspended... Outreach Training Program course would be offered online, and any relevant language or target audience...

Key Skills Portfolio Assessment: Good Practice Guide

ERIC Educational Resources Information Center

Rolfe, Martin; Wilson, Lorraine

2007-01-01

This guide offers advice and guidance to key skills managers, coordinators and other practitioners who are responsible for ensuring that the standards of portfolio assessment in their center are consistent across the center and with national standards. It describes and offers advice and guidance on the stages of assessment and internal moderation…

Evaluation Instruments and Good Practices in Online Education

ERIC Educational Resources Information Center

Baldwin, Sally J.; Trespalacios, Jesús

2017-01-01

Chickering and Gamson's (1987) "Seven Principles for Good Practice in Undergraduate Education" offers extensively researched and validated tenets for best practices in higher education. After a review of the literature, twenty-eight evaluation instruments currently used to design and review online courses in higher education institutions…

Faculty Voice in Intellectual Property Policies: Collective Action for the Public Good

ERIC Educational Resources Information Center

Kezar, Adrianna

2017-01-01

This chapter synthesizes the previous chapters to offer to readers practical recommendations for navigating IP issues, including resources and advice for faculty and administrations to engage in more equitable discussions about the rights of faculty and the interests of the public good.

Oncologic considerations in the elderly.

PubMed

Kamel, Mohamed K; Port, Jeffrey L

2018-02-01

Elderly patients presenting with thoracic malignancies tend to be largely undertreated because of a presumption that this group will incur a high treatment-associated morbidity and mortality. The current review highlights the current practice and recent updates in the surgical management of thoracic malignancies, mainly lung cancer, in the elderly population. Lung resections appears to be relatively safe in the elderly patients presenting with lung cancer. Whenever possible, a lobectomy should be offered to patients with a good performance status who present with early stage disease. However, a limited resection may offer a valuable comparable alternative in patients with advanced comorbidities and borderline pulmonary functions. The use of minimally invasive approaches, namely video-assisted thoracoscopic surgery and robotic surgery are associated with lower morbidity and improved perioperative outcomes compared with the traditional thoracotomy approach and are ideal for the aged. In elderly patients presenting with advanced staged lung cancer, major lung resections following induction therapy, although feasible, should be discussed in a multispecialty tumor board committee. There is growing evidence from the literature that surgical resection is relatively safe in the elderly population. Age by itself should not preclude patients from having curative resection. Resections can be tailored to performance status of the patient.

Porous NiCo2O4 nanoarray-integrated binder-free 3D open electrode offers a highly efficient sensing platform for enzyme-free glucose detection.

PubMed

Luo, X; Huang, M; He, D; Wang, M; Zhang, Y; Jiang, P

2018-05-29

High electrical conductivity and the exposure to more active sites are crucial to boost the performance of a glucose sensor. A porous binary metal oxide nanoarray integrated on a binder-free 3D electrode is expected to offer a highly sensitive sensing platform. As a model, porous NiCo2O4 nanowire arrays supported on carbon cloth (NiCo2O4 NWA/CC) have been prepared and used for enzyme-free glucose sensing. NiCo2O4 NWA/CC shows larger effective surface area, superior electronic conductivity, and higher catalytic activity towards enzyme-free glucose sensing, with a linear range from 1 μM to 0.63 mM, a sensitivity of 4.12 mA mM-1 cm-2, and low detection limit of 0.5 μM. Moreover, NiCo2O4 NWA/CC also displays good selectivity and stability and thus, it can be reliable for glucose detection in human serum samples. These findings inspire the fabrication of a high-performance electrochemical sensing platform by preparing porous binary metal oxide nanoarrays supported on a 3D conductive substrate.

Better Minds, Better Morals: A Procedural Guide to Better Judgment.

PubMed

Schaefer, G Owen; Savulescu, Julian

2017-01-01

Making more moral decisions - an uncontroversial goal, if ever there was one. But how to go about it? In this article, we offer a practical guide on ways to promote good judgment in our personal and professional lives. We will do this not by outlining what the good life consists in or which values we should accept.Rather, we offer a theory of procedural reliability : a set of dimensions of thought that are generally conducive to good moral reasoning. At the end of the day, we all have to decide for ourselves what is good and bad, right and wrong. The best way to ensure we make the right choices is to ensure the procedures we're employing are sound and reliable. We identify four broad categories of judgment to be targeted - cognitive, self-management, motivational and interpersonal. Specific factors within each category are further delineated, with a total of 14 factors to be discussed. For each, we will go through the reasons it generally leads to more morally reliable decision-making, how various thinkers have historically addressed the topic, and the insights of recent research that can offer new ways to promote good reasoning. The result is a wide-ranging survey that contains practical advice on how to make better choices. Finally, we relate this to the project of transhumanism and prudential decision-making. We argue that transhumans will employ better moral procedures like these. We also argue that the same virtues will enable us to take better control of our own lives, enhancing our responsibility and enabling us to lead better lives from the prudential perspective.

Fe-Catalyzed Synthesis of Porous Carbons Spheres with High Graphitization Degree for High-Performance Supercapacitors

NASA Astrophysics Data System (ADS)

Zhu, Jun; Shi, Hongwei; Zhuo, Xin; Hu, Yalin

2017-10-01

We have developed a facile and efficient Fe-catalyzed method for fabrication of porous carbons spheres with high graphitization degree (GNPCs) using glucose as carbon precursor at relatively low carbonization temperature. GNPCs not only have relatively large accessible ion surface area to accommodate greater capacity but also high graphitization degree to accelerate ion diffusion. As a typical application, we demonstrate that GNPCs exhibit excellent electrochemical performance for use in supercapacitors, with high specific capacity of 150.6 F g-1 at current density of 1 A g-1 and good rate capability and superior cycling stability over 10,000 cycles, confirming their potential application for energy storage. Moreover, it is believed that this method offers a new strategy for synthesis of porous carbons with high graphitization degree.

Learning moment-based fast local binary descriptor

NASA Astrophysics Data System (ADS)

Bellarbi, Abdelkader; Zenati, Nadia; Otmane, Samir; Belghit, Hayet

2017-03-01

Recently, binary descriptors have attracted significant attention due to their speed and low memory consumption; however, using intensity differences to calculate the binary descriptive vector is not efficient enough. We propose an approach to binary description called POLAR_MOBIL, in which we perform binary tests between geometrical and statistical information using moments in the patch instead of the classical intensity binary test. In addition, we introduce a learning technique used to select an optimized set of binary tests with low correlation and high variance. This approach offers high distinctiveness against affine transformations and appearance changes. An extensive evaluation on well-known benchmark datasets reveals the robustness and the effectiveness of the proposed descriptor, as well as its good performance in terms of low computation complexity when compared with state-of-the-art real-time local descriptors.

New Redox Polymers that Exhibit Reversible Cleavage of Sulfur Bonds as Cathode Materials.

PubMed

Baloch, Marya; Ben Youcef, Hicham; Li, Chunmei; Garcia-Calvo, Oihane; Rodriguez, Lide M; Shanmukaraj, Devaraj; Rojo, Teofilo; Armand, Michel

2016-11-23

Two new cathode materials based on redox organosulfur polymers were synthesized and investigated for rechargeable lithium batteries as a proof-of-concept study. These cathodes offered good cycling performance owing to the absence of polysulfide solubility, which plagues Li/S systems. Herein, an aliphatic polyamine or a conjugated polyazomethine was used as the base to tether the redox-active species. The activity comes from the cleavage and formation of S-S or N-S bonds, which is made possible by the rigid conjugated backbone. The synthesized polymers were characterized through FTIR spectroscopy and thermogravimetric analysis (TGA). Galvanostatic measurements were performed to evaluate the discharge/charge cycles and characterize the performance of the lithium-based cells, which displayed initial discharge capacities of approximately 300 mA h g -1 at C/5 over 100 cycles with approximately 98 % Coulombic efficiency. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Lithium/disulfide battery R and D

NASA Astrophysics Data System (ADS)

Kaun, T. D.; Deluca, W.; Lee, J.; Redey, L.; Nelson, P. A.

The focus of molten-salt cell R and D in the past year at Argonne National Laboratory has been on developing an understanding of the excellent performance and stability of a lithium/disulfide cell using LiCl-LiBr-KBr electrolyte. For further improvement, we have initiated development of a rod-electrode cell design and design of cells which can tolerate overdischarge and overcharge abuse. Earlier Li/FeS2 cells offered performance quite below expectations and had high capacity decline rates: 0.10 to 0.25 percent per cycle. Approaches for reducing the capacity decline rates of the earlier cells also reduced cell performance. However, our improved Li/FeS2 cell tests indicate good prospects for attaining cell development goals of specific energy of 200 Wh/kg at a 4-h discharge rate, a specific power of 200 W/kg at 80 percent depth of discharge, and a cycle life of 1000 cycles.

Construction and performance evaluation of mediator-less microbial fuel cell using carbon nanotubes as an anode material.

PubMed

Roh, Sung-Hee; Kim, Sun-Il

2012-05-01

A microbial fuel cell (MFC) is a device that converts chemical energy to electrical energy using the catalytic reaction of microorganisms. We investigated the performance of mediator-less MFC with carbon nanotubes (CNTs)/graphite felt composite electrodes. The addition of CNTs to a graphite felt electrode increases the specific surface area of the electrode and enhances the charge transfer capability so as to cause considerable improvement of the electrochemical activity for the anode reaction in a MFC. The performance of the MFC using CNTs/graphite felt electrode has been compared against a plain graphite felt electrode based MFC. A CNTs/graphite felt electrode showed as high as 15% increase in the power density (252 mW/m2) compared to graphite felt electrode (214 mW/m2). The CNTs/graphite felt anode therefore offers good prospects for application in MFCs.

Comparative acoustic performance and mechanical properties of silk membranes for the repair of chronic tympanic membrane perforations.

PubMed

Allardyce, Benjamin J; Rajkhowa, Rangam; Dilley, Rodney J; Xie, Zhigang; Campbell, Luke; Keating, Adrian; Atlas, Marcus D; von Unge, Magnus; Wang, Xungai

2016-12-01

The acoustic and mechanical properties of silk membranes of different thicknesses were tested to determine their suitability as a repair material for tympanic membrane perforations. Membranes of different thickness (10-100μm) were tested to determine their frequency response and their resistance to pressure loads in a simulated ear canal model. Their mechanical rigidity to pressure loads was confirmed by tensile testing. These membranes were tested alongside animal cartilage, currently the strongest available myringoplasty graft as well as paper, which is commonly used for simpler procedures. Silk membranes showed resonant frequencies within the human hearing range and a higher vibrational amplitude than cartilage, suggesting that silk may offer good acoustic energy transfer characteristics. Silk membranes were also highly resistant to simulated pressure changes in the middle ear, suggesting they can resist retraction, a common cause of graft failure resulting from chronic negative pressures in the middle ear. Part of this strength can be explained by the substantially higher modulus of silk films compared with cartilage. This allows for the production of films that are much thinner than cartilage, with superior acoustic properties, but that still provide the same level of mechanical support as thicker cartilage. Together, these in vitro results suggest that silk membranes may provide good hearing outcomes while offering similar levels of mechanical support to the reconstructed middle ear. Copyright © 2016 Elsevier Ltd. All rights reserved.

Online access to journal abstracts and articles.

PubMed

Giedd, J N; Smith, K G

1997-01-01

Advances in information technology now offer several options for child and adolescent psychopharmacologists to navigate the increasingly complex terrain of scientific literature and keep abreast of the rapidly changing advances in our field. MEDLINE, the world's largest database of medical literature, can be accessed and searched by a variety of free or fee-based services. In addition to efficient retrieval of citations and abstracts based on subject, author, or title, many of these services now provide, for a fee, the entire text and graphics of articles (displayed on computer screen, faxed, or mailed). There are also current awareness services to alert the user when new requested literature become available as well as services to send via e-mail the tables of contents of requested journals (sometimes prior to paper publication). For online citation and abstract retrieval, we found that free services, such as PubMed, performed as good or better than fee-based services. Physicians' Online, sponsored by the pharmaceutical industry, offered the lowest price for full-text manuscript delivery. In this article, we review literature search, delivery, and update services and offer some tips on how to most effectively use these resources.

Analysis of the Salvation Army World Service Offices Disaster Relief Capabilities

DTIC Science & Technology

2017-03-01

AOR based primarily on their financial revenues, since revenue is a prerequisite enabling mechanism for the delivery of goods and services . The...are from government sources, whereas contributions include cash and dollar value of in-kind services and goods . Investment revenues largely consist of...taking action among those most in need of assistance offers a compelling and admirable example of the good a religious organization can accomplish

An Economic Case against Vouchers: Why Local Public Schools Are a Local Public Good. Dartmouth Economics Department Working Paper.

ERIC Educational Resources Information Center

Fischel, William A.

This article offers an explanation and economic rationale for the failure of vouchers to be generally accepted by the public, suggesting that public schools are in fact a local public good. The reason economists fail to notice this is they look exclusively to the educational activity of the schools. Education is actually a private good, being both…

Bacteria within the Gastrointestinal Tract Microbiota Correlated with Improved Growth and Feed Conversion: Challenges Presented for the Identification of Performance Enhancing Probiotic Bacteria

PubMed Central

Stanley, Dragana; Hughes, Robert J.; Geier, Mark S.; Moore, Robert J.

2016-01-01

Identification of bacteria associated with desirable productivity outcomes in animals may offer a direct approach to the identification of probiotic bacteria for use in animal production. We performed three controlled chicken trials (n = 96) to investigate caecal microbiota differences between the best and poorest performing birds using four performance measures; feed conversion ratio (FCR), utilization of energy from the feed measured as apparent metabolisable energy, gain rate (GR), and amount of feed eaten (FE). The shifts in microbiota composition associated with the performance measures were very different between the three trials. Analysis of the caecal microbiota revealed that the high and low FCR birds had significant differences in the abundance of some bacteria as demonstrated by shifts in microbiota alpha and beta diversity. Trials 1 and 2 showed significant overall community shifts, however, the microbial changes driving the difference between good and poor performers were very different. Lachnospiraceae, Ruminococcaceae, and Erysipelotrichaceae families and genera Ruminococcus, Faecalibacterium and multiple lineages of genus Clostridium (from families Lachnospiraceae, Ruminococcaceae, and Erysipelotrichaceae) were highly abundant in good FCR birds in Trial 1. Different microbiota was associated with FCR in Trial 2; Catabacteriaceae and unknown Clostridiales family members were increased in good FCR and genera Clostridium (from family Clostridiaceae) and Lactobacillus were associated with poor FCR. Trial 3 had only mild microbiota differences associated with all four performance measures. Overall, the genus Lactobacillus was correlated with feed intake which resulted in poor FCR performance. The genus Faecalibacterium correlated with improved FCR, increased GR and reduced FE. There was overlap in phylotypes correlated with improved FCR and GR, while different microbial cohorts appeared to be correlated with FE. Even under controlled conditions different cohorts of birds developed distinctly different microbiotas. Within the different trial groups the abundance of certain bacterial groups correlated with productivity outcomes. However, with different underlying microbiotas there were different bacteria correlated with performance. The challenge will be to identify probiotic bacteria that can reliably deliver favorable outcomes from diverse microbiotas. PMID:26925052

Professional Decision Making and Personal Ethics.

ERIC Educational Resources Information Center

Black, Jay; Steele, Robert

1991-01-01

Discusses ethics regarding the journalism and mass communications professoriate. Suggests a schema or audit to positively address such issues as accountability and loyalty, values, and principles. Offers eight questions for a personal ethics audit which attempt to join good intentions with good decisions, and shift the enterprise to a positive…

12 CFR Appendix C to Part 707 - Official Staff Interpretations

Code of Federal Regulations, 2014 CFR

2014-01-01

... and Regulations. Good faith compliance with this commentary affords protection from liability under.... Advertisements include commercial messages in visual, oral, or print media that invite, offer, or otherwise..., “prospective rates” are rates set in good faith in advance of the close of a dividend period, that may be...

12 CFR Appendix C to Part 707 - Official Staff Interpretations

Code of Federal Regulations, 2013 CFR

2013-01-01

... and Regulations. Good faith compliance with this commentary affords protection from liability under.... Advertisements include commercial messages in visual, oral, or print media that invite, offer, or otherwise..., “prospective rates” are rates set in good faith in advance of the close of a dividend period, that may be...

Distilling Wisdom from Practice: Finding Meaning in PDS Stories

ERIC Educational Resources Information Center

Breault, Rick A.

2010-01-01

Much of what has been written about the Professional Development School (PDS) experience consists of recounting personal experiences. However, these accounts often offer little to readers since they are neither good research nor good storytelling. In this article I draw on mythology, folklore, psychology and literature to suggest that effective…

The "Good Enough" Parent: Implications for Child Protection

ERIC Educational Resources Information Center

Choate, Peter W.; Engstrom, Sandra

2014-01-01

Child protection workers must determine under what conditions a child should be sustained within the family system. A standard that is often referred to is "good enough" parenting or minimal parenting competence. Research and clinical literature fails to offer workers guidance on the practical application of this terminology. Such…

25 CFR 226.2 - Sale of leases.

Code of Federal Regulations, 2010 CFR

2010-04-01

... satisfactory evidence of his good faith and ability to comply with all provisions of the notice of sale... than 25 percent of the cash bonus offered as a guaranty of good faith. Any and all bids shall be... Osage Tribal Council may also request the Superintendent to undertake the preparation, advertisement and...

Planar junctionless phototransistor: A potential high-performance and low-cost device for optical-communications

NASA Astrophysics Data System (ADS)

Ferhati, H.; Djeffal, F.

2017-12-01

In this paper, a new junctionless optical controlled field effect transistor (JL-OCFET) and its comprehensive theoretical model is proposed to achieve high optical performance and low cost fabrication process. Exhaustive study of the device characteristics and comparison between the proposed junctionless design and the conventional inversion mode structure (IM-OCFET) for similar dimensions are performed. Our investigation reveals that the proposed design exhibits an outstanding capability to be an alternative to the IM-OCFET due to the high performance and the weak signal detection benefit offered by this design. Moreover, the developed analytical expressions are exploited to formulate the objective functions to optimize the device performance using Genetic Algorithms (GAs) approach. The optimized JL-OCFET not only demonstrates good performance in terms of derived drain current and responsivity, but also exhibits superior signal to noise ratio, low power consumption, high-sensitivity, high ION/IOFF ratio and high-detectivity as compared to the conventional IM-OCFET counterpart. These characteristics make the optimized JL-OCFET potentially suitable for developing low cost and ultrasensitive photodetectors for high-performance and low cost inter-chips data communication applications.

The effects of incidental scents in the evaluation of environmental goods: The role of congruity.

PubMed

Bonini, Nicolao; Graffeo, Michele; Hadjichristidis, Constantinos; Perrotta, Valentina

2015-06-01

We investigated whether pleasant ambient scents influence hypothetical and real money contributions toward environmental goods. We hypothesized that they would increase such contributions more when they were congruent with the target goods than when they were incongruent or when no scent was released. The results supported this congruity hypothesis. We offer a mental accessibility account: Pleasant scents that are congruent with a target good make positive information about that good more accessible and thus promote prosocial behavior. © 2014 The Institute of Psychology, Chinese Academy of Sciences and Wiley Publishing Asia Pty Ltd.

Helping Adults to Spell.

ERIC Educational Resources Information Center

Moorhouse, Catherine

This book presents a range of strategies for adult literacy tutors and offers a wealth of practical advice on teaching spelling within the context of writing. Chapters 1-3 offer basic information on talking with the student about spelling, finding out how the student spells and helping the student to see himself/herself as a "good" speller, and…

75 FR 65805 - Transfer and Reorganization of Bank Secrecy Act Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-26

... lies not only with the products and services the covered institution offers, but also with the specific... bank routinely posts a particular transaction to its customer's account. (j) Commodity. Any good... service offered. (l) Contract of sale. Any sale, agreement of sale, or agreement to sell as described in...

The School Store: Learning by Involvement--part 1

ERIC Educational Resources Information Center

Levinson, Lawrence

1974-01-01

If the school store carries suitable product lines, presents them attractively, accommodates the flow of customers, and brings in sufficient sales, it can offer many--if not more--of the learning experiences offered by a good cooperative work station as it relates store operations, merchandising, sales promotion, and financial control. (Author/AG)

Does the Dark Triad of Personality Predict Corrupt Intention? The Mediating Role of Belief in Good Luck

PubMed Central

Zhao, Huanhuan; Zhang, Heyun; Xu, Yan

2016-01-01

The current study is the first attempt to examine the association between the Dark Triad of personality (i.e., Machiavellianism, narcissism, and psychopathy) and corruption through a mediator—belief in good luck. Based on Ajzen's theory of planned behavior, we assumed that individuals with Dark Triad would be more likely to engage in corruption as a result of belief in good luck. In Study 1, a set of hypothetical scenarios was used to assess the bribe-offering intention and the corresponding belief in good luck. Results indicated that while the Dark Triad of personality positively predicted bribe-offering intention, it was mediated by the belief in good luck in gain-seeking. In Study 2, we presented participants with some hypothetical scenarios of bribe-taking and the corresponding belief in good luck. Findings revealed that the Dark Triad of personality was positively related to bribe-taking intention; the relationship between narcissism and bribe-taking intention, and that between psychopathy and bribe-taking intention was mediated by the belief in good luck in penalty-avoidance. However, this belief in good luck did not mediate the relationship between Machiavellianism and bribe-taking intention. These results hold while controlling for demographic variables, dispositional optimism, and self-efficacy. Taken together, this study extended previous research by providing evidence that belief in good luck may be one of the reasons explaining why people with Dark Triad are more likely to engage in corruption regardless of the potential outcomes. Theoretical and practical implications were discussed. PMID:27199841

Does the Dark Triad of Personality Predict Corrupt Intention? The Mediating Role of Belief in Good Luck.

PubMed

Zhao, Huanhuan; Zhang, Heyun; Xu, Yan

2016-01-01

The current study is the first attempt to examine the association between the Dark Triad of personality (i.e., Machiavellianism, narcissism, and psychopathy) and corruption through a mediator-belief in good luck. Based on Ajzen's theory of planned behavior, we assumed that individuals with Dark Triad would be more likely to engage in corruption as a result of belief in good luck. In Study 1, a set of hypothetical scenarios was used to assess the bribe-offering intention and the corresponding belief in good luck. Results indicated that while the Dark Triad of personality positively predicted bribe-offering intention, it was mediated by the belief in good luck in gain-seeking. In Study 2, we presented participants with some hypothetical scenarios of bribe-taking and the corresponding belief in good luck. Findings revealed that the Dark Triad of personality was positively related to bribe-taking intention; the relationship between narcissism and bribe-taking intention, and that between psychopathy and bribe-taking intention was mediated by the belief in good luck in penalty-avoidance. However, this belief in good luck did not mediate the relationship between Machiavellianism and bribe-taking intention. These results hold while controlling for demographic variables, dispositional optimism, and self-efficacy. Taken together, this study extended previous research by providing evidence that belief in good luck may be one of the reasons explaining why people with Dark Triad are more likely to engage in corruption regardless of the potential outcomes. Theoretical and practical implications were discussed.

Workplace etiquette for the medical practice employee.

PubMed

Hills, Laura

2010-01-01

Medical practice workplace etiquette is slowly being modified and fine-tuned. New workplace etiquette rules have become necessary because of advances in communications technology, shifting norms, and expectations of what constitutes good manners. Today's medical practice employees must concern themselves with traditional workplace manners but also the manners that come into play when they make or receive cell phone calls, text messages, and e-mails, and when they use social networking media outside of work. This article offers 25 rules for good manners in the medical practice that relate to the ways employees interact with people today, whether face-to-face or when using electronic communications technologies. It offers practical guidelines for making introductions both inside and outside the medical practice. This article also provides a self-quiz to help medical practice employees assess their workplace etiquette intelligence and 12 tips for good workplace table manners.

Development of PLA hybrid yarns for biobased self-reinforced polymer composites

NASA Astrophysics Data System (ADS)

Köhler, T.; Gries, T.; Seide, G.

2017-10-01

Lightweight materials are a necessity in various industries. Lightweight design is in the key interest of the mobility sector, e.g. the automotive and aerospace industry. This trend applies also for the consumer industries, e.g. sporting goods. In addition, the worldwide demand for replacing fossil-based materials has led to a significant growth of bioplastics. Due to their low mechanical performance and durability, their use is still limited. Therefore, it is necessary to develop biobased, sustainable polymeric materials with high stiffness, high impact and high durability without impairing recyclability at a similar price level of non-biobased solutions. Biobased self-reinforced polymer composites offer these unique properties.

Extremophiles for microbial-electrochemistry applications: A critical review.

PubMed

Shrestha, Namita; Chilkoor, Govinda; Vemuri, Bhuvan; Rathinam, Navanietha; Sani, Rajesh K; Gadhamshetty, Venkataramana

2018-05-01

Extremophiles, notably archaea and bacteria, offer a good platform for treating industrial waste streams that were previously perceived as hostile to the model organisms in microbial electrochemical systems (MESs). Here we present a critical overview of the fundamental and applied biology aspects of halophiles and thermophiles in MESs. The current study suggests that extremophiles enable the MES operations under a seemingly harsh conditions imposed by the physical (pressure, radiation, and temperature) and geochemical extremes (oxygen levels, pH, and salinity). We highlight a need to identify the underpinning mechanisms that define the exceptional electrocatalytic performance of extremophiles in MESs. Copyright © 2018 Elsevier Ltd. All rights reserved.

Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP

NASA Astrophysics Data System (ADS)

Slange, T. K.; Warnet, L. L.; Grouve, W. J. B.; Akkerman, R.

2018-05-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The combination with rapid AFP as blank manufacturing technology can further extend the applicability of stamp forming by allowing rapid lay-up of tailored blanks and offering partial preconsolidation. In an experimental study it is demonstrated that high quality laminates with good flexural strength can be obtained by following this process route. The consolidation of ply-drop regions is demonstrated by flat laminates with a thickness step. The influence of fiber orientations, blank-tooling misalignments and AFP tolerances is investigated.

Electroanalysis and laccase-based biosensor on the determination of phenolic content and antioxidant power of honey samples.

PubMed

de Oliveira Neto, Jerônimo Raimundo; Rezende, Stefani Garcia; Lobón, Gérman Sanz; Garcia, Telma Alves; Macedo, Isaac Yves Lopes; Garcia, Luane Ferreira; Alves, Virgínia Farias; Torres, Ieda Maria Sapateiro; Santiago, Mariângela Fontes; Schmidt, Fernando; de Souza Gil, Eric

2017-12-15

Honey is a functional food widely consumed. Thus, the evaluation of honey samples to determine its phenolic content and antioxidant capacity (AOC) is relevant to determine its quality. Usually AOC is performed by spectrophotometric methods, which lacks reproducibility and practicality. In this context, the electroanalytical methods offer higher simplicity and accuracy. Hence, the aim of this work was to use of electroanalytical tools and laccase based biosensor on the evaluation of AOC and total phenol content (TPC) of honey samples from different countries. The antioxidant power established by electrochemical index presented good correlation with the spectrophotometric FRAP (Ferric Reducing Ability of Plasma) and DPPH (2,2-Diphenyl-1-Picrylhydrazyl) radical scavenging assays. Also, TPC results obtained by the biosensor agreed with the Folin-Ciocalteu (FC) assay. In addition to the semi quantitative results, the electroanalysis offered qualitative parameters, which were useful to indicate the nature of major phenolic compounds. Copyright © 2017 Elsevier Ltd. All rights reserved.

Performance of draught cattle in communal farming areas in Zimbabwe after dry season supplementation.

PubMed

Ndlovu, L R; Francis, J; Hove, E

1996-11-01

Sixty-four pairs of oxen owned by smallholders were randomly allocated to one of 3 supplementary treatments offered at one kg per head per day from July to October or to a control where no supplement was offered. The supplements were maize stover plus silverleaf hay (2:1 w/w), urea-treated maize stover (50 g urea/kg stover) and plain maize stover. Animals fed plain maize stover or no supplement lost weight (6 to 7% of initial weight), whilst those fed the other 2 supplements maintained their liveweights. Supplementation reduced time spent on feeding activities by 10 per cent. Animals fed on urea-treated maize stover or maize stover plus silverleaf hay ploughed at speeds that were 29% faster than oxen on the other treatments and covered 45% more area. Blood parameters indicated a general deficiency of nitrogen intake throughout the dry season. It was concluded that supplements of good quality have the potential to improve the working ability of communal area oxen.

Fluid Analysis and Improved Structure of an ATEG Heat Exchanger Based on Computational Fluid Dynamics

NASA Astrophysics Data System (ADS)

Tang, Z. B.; Deng, Y. D.; Su, C. Q.; Yuan, X. H.

2015-06-01

In this study, a numerical model has been employed to analyze the internal flow field distribution in a heat exchanger applied for an automotive thermoelectric generator based on computational fluid dynamics. The model simulates the influence of factors relevant to the heat exchanger, including the automotive waste heat mass flow velocity, temperature, internal fins, and back pressure. The result is in good agreement with experimental test data. Sensitivity analysis of the inlet parameters shows that increase of the exhaust velocity, compared with the inlet temperature, makes little contribution (0.1 versus 0.19) to the heat transfer but results in a detrimental back pressure increase (0.69 versus 0.21). A configuration equipped with internal fins is proved to offer better thermal performance compared with that without fins. Finally, based on an attempt to improve the internal flow field, a more rational structure is obtained, offering a more homogeneous temperature distribution, higher average heat transfer coefficient, and lower back pressure.

The hematopoietic stem cell transplantation in Indonesia: an unsolved dilemma.

PubMed

Hariman, H

2008-08-01

Allogeneic BMT was performed in Indonesia, but had to be stopped prematurely because of the small number of patients. In the beginning, only patients with sufficient financial resources to travel to western countries could undergo transplant procedures. When neighbouring countries (Singapore and Malaysia) began performing transplant, patients were referred to those centres. In both countries, the procedure is more economical and therefore patients come from a broader range of economic classes. The Indonesian hematologist must deal with the post-transplantation side effects, such as GVHD, which are mostly of the chronic type of GVHD. The types of the post-transplant complications do not differ too much from other centres and need the same treatment used in the transplant centres. Hematologists in Indonesia also treat complications of HSCT performed in other countries. When there is no recovery of HSCT development in Indonesia so far, many commercially oriented companies or centres from other countries see Indonesia as a good commercial market and offer services, some of which are not scientifically sound. One of the main problems is umbilical cord blood stem cell banking from foreign countries, which is eagerly offered to parents expecting a baby. Moreover, parents are not fully protected by law. In conclusion, Indonesia needs to revive its own HSCT program to serve and protect its own patients of being used as commercial targets by other countries.

Better Minds, Better Morals: A Procedural Guide to Better Judgment

PubMed Central

Schaefer, G. Owen; Savulescu, Julian

2017-01-01

Making more moral decisions – an uncontroversial goal, if ever there was one. But how to go about it? In this article, we offer a practical guide on ways to promote good judgment in our personal and professional lives. We will do this not by outlining what the good life consists in or which values we should accept.Rather, we offer a theory of procedural reliability: a set of dimensions of thought that are generally conducive to good moral reasoning. At the end of the day, we all have to decide for ourselves what is good and bad, right and wrong. The best way to ensure we make the right choices is to ensure the procedures we’re employing are sound and reliable. We identify four broad categories of judgment to be targeted – cognitive, self-management, motivational and interpersonal. Specific factors within each category are further delineated, with a total of 14 factors to be discussed. For each, we will go through the reasons it generally leads to more morally reliable decision-making, how various thinkers have historically addressed the topic, and the insights of recent research that can offer new ways to promote good reasoning. The result is a wide-ranging survey that contains practical advice on how to make better choices. Finally, we relate this to the project of transhumanism and prudential decision-making. We argue that transhumans will employ better moral procedures like these. We also argue that the same virtues will enable us to take better control of our own lives, enhancing our responsibility and enabling us to lead better lives from the prudential perspective. PMID:29098205

Why Union Activists Write Good Stories

ERIC Educational Resources Information Center

Worthen, Helena H.

2013-01-01

The representative structure of a union is a maze which, when travelled as a narrative, has drama at every turn. It sets up expectations, pits good against evil, involves many characters with different interests, keeps the clock ticking, and offers opportunities for happy endings (and disappointments) at every level. Union members who are not…

High Road Partnerships Report: Innovations in Building Good Jobs and Strong Communities.

ERIC Educational Resources Information Center

American Federation of Labor and Congress of Industrial Organizations, Washington, DC. Working for America Inst.

When deciding how to compete in the new global economy, employers can opt for "low-road" strategies such as low wages and no job security. Alternatively, they can choose the "high road" and compete by offering quality goods and services, innovation, and value. Fourteen successful "high-road" partnerships were examined…

MADD About Good Books.

ERIC Educational Resources Information Center

Parker, Marilyn K.

The MADD (music, art, dance, and drama) About Good Books program is a summer Arts Impact program for students in grades 3-6 offered by the Columbus, Ohio Public Schools. Conducted by two literature teachers, the 1975 summer program got under way as the children set the stage by constructing a large tree, for reading and chatting under, and…

Principal Connection / Amazon and the Whole Teacher

ERIC Educational Resources Information Center

Hoerr, Thomas R.

2015-01-01

A recent controversy over Amazon's culture has strong implications for the whole child approach, and it offers powerful lessons for principals. A significant difference between the culture of so many businesses today and the culture at good schools is that in good schools, the welfare of the employees is very important. Student success is the…

The Case for the L-Shaped Classroom.

ERIC Educational Resources Information Center

Dyck, James A.

1994-01-01

Classroom shape is an important variable in educational quality. The traditional squat rectangle may be counterproductive to the learning process. The fat L-shaped classroom, compared to H, X, and T shapes, offers good separation, is more compact, and provides good visibility and ease of movement for the teacher. It has excellent nesting…

The Untamed Imagination: Creative Writing in Schools.

ERIC Educational Resources Information Center

Cross, Gillian

1999-01-01

Offers thoughts on mastering creative writing, and why a good teacher is essential to the process. Asserts that students must ultimately satisfy themselves and not their teachers, and that a pupil's innermost imagination must be nurtured and given free-rein. Makes emphatic the view that good teaching is one of the most unselfish activities that…

12 CFR Appendix C to Part 707 - Official Staff Interpretations

Code of Federal Regulations, 2012 CFR

2012-01-01

... and Regulations. Good faith compliance with this commentary affords protection from liability under... messages in visual, oral, or print media that invite, offer, or otherwise announce generally to members and..., “prospective rates” are rates set in good faith in advance of the close of a dividend period, that may be...

12 CFR Appendix C to Part 707 - Official Staff Interpretations

Code of Federal Regulations, 2011 CFR

2011-01-01

... and Regulations. Good faith compliance with this commentary affords protection from liability under... messages in visual, oral, or print media that invite, offer, or otherwise announce generally to members and..., “prospective rates” are rates set in good faith in advance of the close of a dividend period, that may be...

Top Ten Secrets for a Successful Workshop

ERIC Educational Resources Information Center

Johnson, Doug

2006-01-01

In this article, the author provides 10 suggestions for a successful workshop, including advice and examples: (1) Know your role; (2) Limit your topic; (3) Be organized and communicate that organization; (4) Set out a problem or possibility; then offer a solution or opportunity; (5) Be conversational and have fun; (6) Good handouts and good slides…

Getting on the Right Bus

ERIC Educational Resources Information Center

Lund, Jacalyn

2010-01-01

This article presents the author's forty-fourth Amy Morris Homans commemorative lecture. In the lecture, the author offers her thoughts about the future of physical education profession and the role that this organization plays in moving educators from good to great. The conference theme draws from a book called "Good to Great" that examined why…

The Common Good: The Inclusion of Non-Catholic Students in Catholic Schools

ERIC Educational Resources Information Center

Donlevy, J. Kent

2008-01-01

This paper offers that liberal and communitarian concepts of the common good are exemplified in the Catholic school's policy of the inclusion of non-Catholic students. In particular, the liberal concepts of personal autonomy, individual rights and freedoms, and the principles of fairness, justice, equality and respect for diversity--as democratic…

9 CFR 202.117 - Rule 17: Petition to reopen a hearing; to rehear or reargue a proceeding; to reconsider an order...

Code of Federal Regulations, 2010 CFR

2010-01-01

... the evidence to be offered, show that it is not merely cumulative, and state a good reason why it was... on such respondent of such order. Such a petition must state a good reason why an answer was not...

Use of 3 mm percutaneous instruments with 5 mm end effectors during different laparoscopic procedures.

PubMed

David, Giulia; Boni, Luigi; Rausei, Stefano; Cassinotti, Elisa; Dionigi, Gianlorenzo; Rovera, Francesca; Spampatti, Sebastiano; Colombo, Elisabetta Marta; Dionigi, Renzo

2013-01-01

With a recent focus on minimizing the visibility of scars, new techniques have been developed. Minilaparoscopy reemerged as an attractive option for surgery as it limits tissue trauma, reduces post-operative pain and improves cosmesis. This study was designed to describe our experience with percutaneous trocarless 3 mm instruments used in combination with standard 5 mm and 10 mm laparoscopic instruments in different general surgery procedures. We used the PSS (Percutaneous Surgical Set, Ethicon Endo surgery, Cincinnati, OH, USA) in different surgical procedures as accessory instruments in combination with standard 5 mm and 10 mm standard laparoscopic instruments. The use of percutaneous instruments was safe and feasible in all performed procedures. The surgical technique was not modified. The percutaneous instruments can assure a good grip and can be used for traction and counter-traction. No complications have been described. No pain at the site of insertion has been reported. The skin, muscle and peritoneal defects were smaller than with the 3 mm laparoscopic traditional instruments. Percutaneous approach seems to be a good option in general surgery in terms of efficiency, offering better cosmetic results and good pain control. Copyright © 2013 Elsevier Ltd and Surgical Associates Ltd. All rights reserved.

An implantation of multifocal lenses LS-313 MF30, Mplus and MplusX models, during and after posterior vitrectomy in patients treated for various diseases of the retina.

PubMed

Cywinski, Adam; Piwonska-Lobermajer, Anna; Penter, Sandra

2016-08-01

A retrospective analysis of visual function and postoperative complaints in patients after posterior vitrectomy and multifocal Mplus or MplusX intraocular lens implantation. 14 patients (14 eyes) were enrolled in the study. All patients underwent posterior vitrectomy due to underlying retinal pathologies. A combined procedure of phacovitrectomy was performed in some patients, whereas others underwent a separate cataract extraction as a second stage of treatment. The Mplus or MplusX intraocular lenses were implanted in all cases and the postoperative visual function and patient complaints were analysed. Multifocal lens explantation was not necessary in any case. Good uncorrected distance and near visual acuity was achieved in most cases. When implanted prior to vitrectomy, the intraocular lenses did not limit the view into the posterior segment, so precise manipulations within the macula and peripheral retina were feasible. The right choice between Mplus and MplusX minimises the rate of postoperative complaints. Conslusions: The multifocal Mplus and MplusX intraocular lenses offer a good alternative for patients who need posterior vitrectomy and still want to achieve good uncorrected distance and near visual acuity.

Performance evaluation of a novel high performance pinhole array detector module using NEMA NU-4 image quality phantom for four head SPECT Imaging

NASA Astrophysics Data System (ADS)

Rahman, Tasneem; Tahtali, Murat; Pickering, Mark R.

2015-03-01

Radiolabeled tracer distribution imaging of gamma rays using pinhole collimation is considered promising for small animal imaging. The recent availability of various radiolabeled tracers has enhanced the field of diagnostic study and is simultaneously creating demand for high resolution imaging devices. This paper presents analyses to represent the optimized parameters of a high performance pinhole array detector module using two different characteristics phantoms. Monte Carlo simulations using the Geant4 application for tomographic emission (GATE) were executed to assess the performance of a four head SPECT system incorporated with pinhole array collimators. The system is based on a pixelated array of NaI(Tl) crystals coupled to an array of position sensitive photomultiplier tubes (PSPMTs). The detector module was simulated to have 48 mm by 48 mm active area along with different pinhole apertures on a tungsten plate. The performance of this system has been evaluated using a uniform shape cylindrical water phantom along with NEMA NU-4 image quality (IQ) phantom filled with 99mTc labeled radiotracers. SPECT images were reconstructed where activity distribution is expected to be well visualized. This system offers the combination of an excellent intrinsic spatial resolution, good sensitivity and signal-to-noise ratio along with high detection efficiency over an energy range between 20-160 keV. Increasing number of heads in a stationary system configuration offers increased sensitivity at a spatial resolution similar to that obtained with the current SPECT system design with four heads.

Treatment Manuals: The Good, the Bad and the Useful

ERIC Educational Resources Information Center

Hollin, Clive R.

2009-01-01

This paper offers a commentary on the debate between Marshall and Mann on the desirability and merits of treatment manuals in the treatment of sexual offenders. Marshall offers a view of manuals as restrictive to clinical practice and as stifling to clinical innovation. Mann takes the position that manuals are a vital component in effective…

77 FR 43892 - Self-Regulatory Organizations; BATS Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... or service offered by the Member within the three months immediately preceding the date of an... conversion'' means, in an offer or agreement to sell or provide any goods or services, a provision under which a customer receives a product or service for free for an initial period and will incur an...

77 FR 26348 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-03

... or service offered by the Member within the three months immediately preceding the date of an... conversion'' means, in an offer or agreement to sell or provide any goods or services, a provision under which a customer receives a product or service for free for an initial period and will incur an...

77 FR 26343 - Self-Regulatory Organizations; EDGX Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-03

... or service offered by the Member within the three months immediately preceding the date of an... conversion'' means, in an offer or agreement to sell or provide any goods or services, a provision under which a customer receives a product or service for free for an initial period and will incur an...

Good health checks according to the general public; expectations and criteria: a focus group study.

PubMed

Stol, Yrrah H; Asscher, Eva C A; Schermer, Maartje H N

2018-06-22

Health checks or health screenings identify (risk factors for) disease in people without a specific medical indication. So far, the perspective of (potential) health check users has remained underexposed in discussions about the ethics and regulation of health checks. In 2017, we conducted a qualitative study with lay people from the Netherlands (four focus groups). We asked what participants consider characteristics of good and bad health checks, and whether they saw a role for the Dutch government. Participants consider a good predictive value the most important characteristic of a good health check. Information before, during and after the test, knowledgeable and reliable providers, tests for treatable (risk factors for) disease, respect for privacy, no unnecessary health risks and accessibility are also mentioned as criteria for good health checks. Participants make many assumptions about health check offers. They assume health checks provide certainty about the presence or absence of disease, that health checks offer opportunities for health benefits and that the privacy of health check data is guaranteed. In their choice for provider and test they tend to rely more on heuristics than information. Participants trust physicians to put the interest of potential health check users first and expect the Dutch government to intervene if providers other than physicians failed to do so by offering tests with a low predictive value, or tests that may harm people, or by infringing the privacy of users. Assumptions of participants are not always justified, but they may influence the choice to participate. This is problematic because choices for checks with a low predictive value that do not provide health benefits may create uncertainty and may cause harm to health; an outcome diametrically opposite to the one intended. Also, this may impair the relationship of trust with physicians and the Dutch government. To further and protect autonomous choice and to maintain trust, we recommend the following measures to timely adjust false expectations: advertisements that give an accurate impression of health check offers, and the installation of a quality mark.

Human Albumin Fragments Nanoparticles as PTX Carrier for Improved Anti-cancer Efficacy

PubMed Central

Ge, Liang; You, Xinru; Huang, Jun; Chen, Yuejian; Chen, Li; Zhu, Ying; Zhang, Yuan; Liu, Xiqiang; Wu, Jun; Hai, Qian

2018-01-01

For enhanced anti-cancer performance, human serum albumin fragments (HSAFs) nanoparticles (NPs) were developed as paclitaxel (PTX) carrier in this paper. Human albumins were broken into fragments via degradation and crosslinked by genipin to form HSAF NPs for better biocompatibility, improved PTX drug loading and sustained drug release. Compared with crosslinked human serum albumin NPs, the HSAF-NPs showed relative smaller particle size, higher drug loading, and improved sustained release. Cellular and animal results both indicated that the PTX encapsulated HSAF-NPs have shown good anti-cancer performance. And the anticancer results confirmed that NPs with fast cellular internalization showed better tumor inhibition. These findings will not only provide a safe and robust drug delivery NP platform for cancer therapy, but also offer fundamental information for the optimal design of albumin based NPs. PMID:29946256

C++ and data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naumann, Axel; /CERN; Canal, Philippe

2008-01-01

High performance computing with a large code base and C++ has proved to be a good combination. But when it comes to storing data, C++ is a problematic choice: it offers no support for serialization, type definitions are amazingly complex to parse, and the dependency analysis (what does object A need to be stored?) is incredibly difficult. Nevertheless, the LHC data consists of C++ objects that are serialized with help from ROOT's reflection database and interpreter CINT. The fact that we can do it on that scale, and the performance with which we do it makes this approach unique andmore » stirs interest even outside HEP. I will show how CINT collects and stores information about C++ types, what the current major challenges are (dictionary size), and what CINT and ROOT have done and plan to do about it.« less

Superthin Solar Cells Based on AIIIBV/Ge Heterostructures

NASA Astrophysics Data System (ADS)

Pakhanov, N. A.; Pchelyakov, O. P.; Vladimirov, V. M.

2017-11-01

A comparative analysis of the prospects of creating superthin, light-weight, and highly efficient solar cells based on AIIIBV/InGaAs and AIIIBV/Ge heterostructures is performed. Technological problems and prospects of each variant are discussed. A method of thinning of AIIIBV/Ge heterostructures with the use of an effective temporary carrier is proposed. The method allows the process to be performed almost with no risk of heterostructure fracture, thinning of the Ge junction down to several tens of micrometers (or even several micrometers), significant enhancement of the yield of good structures, and also convenient and reliable transfer of thinned solar cells to an arbitrary light and flexible substrate. Such a technology offers a possibility of creating high-efficiency thin and light solar cells for space vehicles on the basis of mass-produced AIIIBV/Ge heterostructures.

Consumer perception and acceptance of pork and chicken sausage

NASA Astrophysics Data System (ADS)

Ristić, M.; Troeger, K.; Đinović-Stojanović, J.; Knežević, N.; Damnjanović, M.

2017-09-01

This study was performed to evaluate consumers’ perception and acceptance of selected pork and chicken sausage (budim and chicken sausages, respectively) from Zlatiborac Meat Company. Sensory evaluation was performed by Serbian consumers (n=1157) in three retail stores in Belgrade. Consumers were asked for their preference for taste, salt content and smoke of two sausages and to recognize the kind of meat which was used to make these meat products. Consumers evaluated taste, salt content and smoke flavor of budim and chicken sausages with the highest percentage of the best offered answer. Between 47-55%, 72-76% and 82-84% of consumers evaluated the taste of sausages as good, the salt content as well-balanced and the smoke flavor as balanced, respectively. Tukey’s HSD test was applied to analyze variations of male and female perception and acceptance of analyzed sausages.

Case studies of pre-engineered and manufactured sound isolation rooms for music practice and radio broadcast

NASA Astrophysics Data System (ADS)

Probst, Ron N.; Rypka, Dann

2005-09-01

Pre-engineered and manufactured sound isolation rooms were developed to ensure guaranteed sound isolation while offering the unique ability to be disassembled and relocated without loss of acoustic performance. Case studies of pre-engineered sound isolation rooms used for music practice and various radio broadcast purposes are highlighted. Three prominent universities wrestle with the challenges of growth and expansion while responding to the specialized acoustic requirements of these spaces. Reduced state funding for universities requires close examination of all options while ensuring sound isolation requirements are achieved. Changing curriculum, renovation, and new construction make pre-engineered and manufactured rooms with guaranteed acoustical performance good investments now and for the future. An added benefit is the optional integration of active acoustics to provide simulations of other spaces or venues along with the benefit of sound isolation.

Good documentation practice in clinical research

PubMed Central

Bargaje, Chitra

2011-01-01

One of the most common inspection findings in investigator site inspections is lack of reliable, accurate and adequate source documentation. This also happens to be the most common pitfall identified during sponsor audits. The importance of good documentation practice needs to be emphasized to investigator sites to ensure that the study results are built on the foundation of credible and valid data. This article focuses on the key principles of good documentation practice and offers suggestions for improvement. PMID:21731856

Good documentation practice in clinical research.

PubMed

Bargaje, Chitra

2011-04-01

One of the most common inspection findings in investigator site inspections is lack of reliable, accurate and adequate source documentation. This also happens to be the most common pitfall identified during sponsor audits. The importance of good documentation practice needs to be emphasized to investigator sites to ensure that the study results are built on the foundation of credible and valid data. This article focuses on the key principles of good documentation practice and offers suggestions for improvement.

Validation of the updated ArthroS simulator: face and construct validity of a passive haptic virtual reality simulator with novel performance metrics.

PubMed

Garfjeld Roberts, Patrick; Guyver, Paul; Baldwin, Mathew; Akhtar, Kash; Alvand, Abtin; Price, Andrew J; Rees, Jonathan L

2017-02-01

To assess the construct and face validity of ArthroS, a passive haptic VR simulator. A secondary aim was to evaluate the novel performance metrics produced by this simulator. Two groups of 30 participants, each divided into novice, intermediate or expert based on arthroscopic experience, completed three separate tasks on either the knee or shoulder module of the simulator. Performance was recorded using 12 automatically generated performance metrics and video footage of the arthroscopic procedures. The videos were blindly assessed using a validated global rating scale (GRS). Participants completed a survey about the simulator's realism and training utility. This new simulator demonstrated construct validity of its tasks when evaluated against a GRS (p ≤ 0.003 in all cases). Regarding it's automatically generated performance metrics, established outputs such as time taken (p ≤ 0.001) and instrument path length (p ≤ 0.007) also demonstrated good construct validity. However, two-thirds of the proposed 'novel metrics' the simulator reports could not distinguish participants based on arthroscopic experience. Face validity assessment rated the simulator as a realistic and useful tool for trainees, but the passive haptic feedback (a key feature of this simulator) is rated as less realistic. The ArthroS simulator has good task construct validity based on established objective outputs, but some of the novel performance metrics could not distinguish between surgical experience. The passive haptic feedback of the simulator also needs improvement. If simulators could offer automated and validated performance feedback, this would facilitate improvements in the delivery of training by allowing trainees to practise and self-assess.

3D Nanostructured materials: TiO2 nanoparticles incorporated gellan gum scaffold for photocatalyst and biomedical Applications

NASA Astrophysics Data System (ADS)

Hasmizam Razali, Mohd; Arifah Ismail, Nur; Zulkafli, Mohd Farhan Azly Mohd; Anuar Mat Amin, Khairul

2018-03-01

A unique three-dimensional (3D) nanostructured gellan gum (GG) is fabricated by incorporating TiO2 nanoparticles (GG + TiO2NPs) scaffold by freeze-drying. The fabricated GG + TiO2NPs were characterized using Fourier transform infrared (FTIR), x-ray diffraction (XRD), and scanning electron microscopy (SEM) to study their physiochemical properties. FTIR was used to investigate the intermolecular interactions in the scaffolds. The crystal structure was determined by bulk analysis using XRD and SEM for microstructure observation of scaffold surfaces. The performance of synthesized GG + TiO2NPs scaffold 3D nanostructured materials was evaluated as a photocatalyst for methyl orange (MO) degradation and for biomedical applications. The results showed that the scaffold possessed good photocatalytic activity for removal of methyl orange with 88.24% degradation after 3 h of UV irradiation. The scaffold also induces the cell growth, thus offering a good candidate for biomedical applications.

Relatedness predicts multiple measures of investment in cooperative nest construction in sociable weavers

PubMed Central

Leighton, Gavin M.; Echeverri, Sebastian; Heinrich, Dirk; Kolberg, Holger

2015-01-01

Although communal goods are often critical to society, they are simultaneously susceptible to exploitation and are evolutionarily stable only if mechanisms exist to curtail exploitation. Mechanisms such as punishment and kin selection have been offered as general explanations for how communal resources can be maintained. Evidence for these mechanisms comes largely from humans and social insects, leaving their generality in question. To assess how communal resources are maintained, we observed cooperative nest construction in sociable weavers (Philetairus socius). The communal nest of sociable weavers provides thermal benefits for all individuals but requires continual maintenance. We observed cooperative nest construction and also recorded basic morphological characteristics. We also collected blood samples, performed next-generation sequencing, and isolated 2358 variable single nucleotide polymorphisms (SNPs) to estimate relatedness. We find that relatedness predicts investment in cooperative nest construction, while no other morphological characters significantly explain cooperative output. We argue that indirect benefits are a critical fitness component for maintaining the cooperative behavior that maintains the communal good. PMID:26726282

The seagrass Posidonia oceanica: Ecosystem services identification and economic evaluation of goods and benefits.

PubMed

Campagne, Carole Sylvie; Salles, Jean-Michel; Boissery, Pierre; Deter, Julie

2015-08-15

Posidonia oceanica is a marine angiosperm endemic from the Mediterranean. Despite their protection, its meadows are regressing. The economic valuation of ecosystem services (ES) assesses the contribution of ecosystems to human well-being and may provide local policy makers help in territorial development. To estimate the economic value of P. oceanica seagrass and the meadows that it forms to better account its presence in coastal development, identification and assessment of ES provided are first performed. Then goods and benefits (GB) and their economical values are estimated. In total, 25ES are identified and 7GB are economically evaluated. The economic value of GB provided by P. oceanica ranges between 25.3 million and 45.9 million€/year which means 283-513€/ha/year. Because of the lack of existing available data, only 7GB linked to 11/25ES have been estimated. Despite this overall undervaluation, this study offers a value for coastal development policies to take into account. Copyright © 2015 Elsevier Ltd. All rights reserved.

High-performance SERS substrate based on hybrid structure of graphene oxide/AgNPs/Cu film@pyramid Si

NASA Astrophysics Data System (ADS)

Li, Zhe; Xu, Shi Cai; Zhang, Chao; Liu, Xiao Yun; Gao, Sai Sai; Hu, Li Tao; Guo, Jia; Ma, Yong; Jiang, Shou Zhen; Si, Hai Peng

2016-12-01

We present a novel surface-enhanced Raman scattering (SERS) substrate based on graphene oxide/silver nanoparticles/copper film covered silicon pyramid arrays (GO/AgNPs/PCu@Si) by a low-cost and simple method. The GO/AgNPs/PCu@Si substrate presents high sensitivity, good homogeneity and well stability with R6G molecules as a probe. The detected concentration of Rhodamine 6 G (R6G) is as low as 10-15 M. These sensitive SERS behaviors are also confirmed in theory via a commercial COMSOL software, the electric field enhancement is not only formed between the AgNPs, but also formed between the AgNPs and Cu film. And the GO/AgNPs/PCu@Si substrates also present good property on practical application for the detection of methylene blue (MB) and crystal violet (CV). This work may offer a novel and practical method to facilitate the SERS applications in areas of medicine, food safety and biotechnology.

High-performance SERS substrate based on hybrid structure of graphene oxide/AgNPs/Cu film@pyramid Si.

PubMed

Li, Zhe; Xu, Shi Cai; Zhang, Chao; Liu, Xiao Yun; Gao, Sai Sai; Hu, Li Tao; Guo, Jia; Ma, Yong; Jiang, Shou Zhen; Si, Hai Peng

2016-12-07

We present a novel surface-enhanced Raman scattering (SERS) substrate based on graphene oxide/silver nanoparticles/copper film covered silicon pyramid arrays (GO/AgNPs/PCu@Si) by a low-cost and simple method. The GO/AgNPs/PCu@Si substrate presents high sensitivity, good homogeneity and well stability with R6G molecules as a probe. The detected concentration of Rhodamine 6 G (R6G) is as low as 10 -15 M. These sensitive SERS behaviors are also confirmed in theory via a commercial COMSOL software, the electric field enhancement is not only formed between the AgNPs, but also formed between the AgNPs and Cu film. And the GO/AgNPs/PCu@Si substrates also present good property on practical application for the detection of methylene blue (MB) and crystal violet (CV). This work may offer a novel and practical method to facilitate the SERS applications in areas of medicine, food safety and biotechnology.

High-performance SERS substrate based on hybrid structure of graphene oxide/AgNPs/Cu film@pyramid Si

PubMed Central

Li, Zhe; Xu, Shi Cai; Zhang, Chao; Liu, Xiao Yun; Gao, Sai Sai; Hu, Li Tao; Guo, Jia; Ma, Yong; Jiang, Shou Zhen; Si, Hai Peng

2016-01-01

We present a novel surface-enhanced Raman scattering (SERS) substrate based on graphene oxide/silver nanoparticles/copper film covered silicon pyramid arrays (GO/AgNPs/PCu@Si) by a low-cost and simple method. The GO/AgNPs/PCu@Si substrate presents high sensitivity, good homogeneity and well stability with R6G molecules as a probe. The detected concentration of Rhodamine 6 G (R6G) is as low as 10−15 M. These sensitive SERS behaviors are also confirmed in theory via a commercial COMSOL software, the electric field enhancement is not only formed between the AgNPs, but also formed between the AgNPs and Cu film. And the GO/AgNPs/PCu@Si substrates also present good property on practical application for the detection of methylene blue (MB) and crystal violet (CV). This work may offer a novel and practical method to facilitate the SERS applications in areas of medicine, food safety and biotechnology. PMID:27924863

Breech presentation: an audit project as means of pursuing clinical excellence.

PubMed

Siassakos, D; Anderson, H; Panter, K

2005-10-01

Clinical audit is an effective quality improvement process to evaluate important clinical issues. Breech presentation is such an issue due to its contribution to the rising caesarean section (CS) rate. We set out to assess the management of breech presentation using, as standards, the delivery suite protocol and national guidelines. Our first audit revealed a low success rate of external cephalic version (ECV) and deficient documentation of written consent for ECV, other aspects of care being satisfactory. The results were presented to a multidisciplinary meeting and disseminated to relevant stakeholders. A re-audit was then performed. It confirmed significant improvement in the documentation of consent for ECV. It also revealed a good detection rate of breech, optimal offer rate of ECV and good neonatal outcome. However, uptake of ECV as well as the success rate could both be improved so as to reduce the CS rate for breech presentation. We discuss options for improving the uptake and success rate for ECV.

Rational Design and Facile Synthesis of Boranophosphate Ionic Liquids as Hypergolic Rocket Fuels.

PubMed

Liu, Tianlin; Qi, Xiujuan; Wang, Binshen; Jin, Yunhe; Yan, Chao; Wang, Yi; Zhang, Qinghua

2018-05-14

The design and synthesis of new hypergolic ionic liquids (HILs) as replacements for toxic hydrazine derivatives have been the focus of current academic research in the field of liquid bipropellant fuels. In most cases, however, the requirements of excellent ignition performances, good hydrolytic stabilities, and low synthetic costs are often contradictory, which makes the development of high-performance HILs an enormous challenge. Here, we show how a fuel-rich boranophosphate ion was rationally designed and used to synthesize a series of high-performance HILs with excellent comprehensive properties. In the design strategy, we introduced the {BH 3 } moiety into the boranophosphate ion for improving the self-ignition property, whereas the complexation of boron and phosphite was used to improve the hydrolytic activity of the borohydride species. As a result, these boranophosphate HILs exhibited wide liquid operating ranges (>220 °C), high densities (1.00-1.10 g cm -3 ), good hydrolytic stabilities, and short ignition delay times (2.3-9.7 milliseconds) with white fuming nitric acid (WFNA) as the oxidizer. More importantly, these boranophosphate HILs could be readily prepared in high yields from commercial phosphite esters, avoiding complex and time-consuming synthetic routes. This work offers an effective strategy of designing boranophosphate HILs towards safer and greener hypergolic fuels for liquid bipropellant applications. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

External fixation of “intertrochanteric” fractures

PubMed Central

Gani, Naseem ul; Kangoo, Khursheed Ahmed; Bashir, Arshad; Muzaffer, Rahil; Bhat, Mohammad Farooq; Farooq, Munir; Badoo, Abdul Rashid; Dar, Imtiyaz Hussian; Wani, Mudassir Maqbool

2009-01-01

In developing countries, due to limited availability of modern anesthesia and overcrowding of the hospitals with patients who need surgery, high-risk patients with “intertrochanteric” fractures remain unsuita ble for open reduction and internal fixation. The aim of this study was to analyze the results of external fixation of “intertrochanteric” fractures in high-risk geriatric patients in a developing country. The results of 62 ambulatory high-risk geriatric patients with a mean age of 70 years (range 58–90 years) with “intertrochanteric” fractures, in whom external fixation was performed, are reported. Eight patients died during follow-up due to medical causes unrelated to the surgical procedure. So only 54 patients were available for final assessment. Procedure is simple, performed under local anesthesia, requires less time for surgery and is associated with less blood loss. Good fixation and early ambulation was achieved in most of the patients. Average time to union was 14 weeks. Thirty-one patients developed superficial pin tract infection and 28 patients had average shortening of 15 mm due to impaction and varus angulation. Functional outcome was assessed using Judet's point system. Good to excellent results were achieved in 44 patients. This study demonstrated that external fixation of “intertrochantric” fractures performed under local anesthesia offers significant advantage in ambulatory high-risk geriatric patients especially in a developing country. PMID:21808680

Facile synthesis of high strength hot-water wood extract films with oxygen-barrier performance

NASA Astrophysics Data System (ADS)

Chen, Ge-Gu; Fu, Gen-Que; Wang, Xiao-Jun; Gong, Xiao-Dong; Niu, Ya-Shuai; Peng, Feng; Yao, Chun-Li; Sun, Run-Cang

2017-01-01

Biobased nanocomposite films for food packaging with high mechanical strength and good oxygen-barrier performance were developed using a hot-water wood extract (HWE). In this work, a facile approach to produce HWE/montmorillonite (MMT) based nanocomposite films with excellent physical properties is described. The focus of this study was to determine the effects of the MMT content on the structure and mechanical properties of nanocomposites and the effects of carboxymethyl cellulose (CMC) on the physical properties of the HWE-MMT films. The experimental results suggested that the intercalation of HWE and CMC in montmorillonite could produce compact, robust films with a nacre-like structure and multifunctional characteristics. This results of this study showed that the mechanical properties of the film designated FCMC0.05 (91.5 MPa) were dramatically enhanced because the proportion of HWE, MMT and CMC was 1:1.5:0.05. In addition, the optimized films exhibited an oxygen permeability below 2.0 cm3 μm/day·m2·kPa, as well as good thermal stability due to the small amount of CMC. These results provide a comprehensive understanding for further development of high-performance nanocomposites which are based on natural polymers (HWE) and assembled layered clays (MMT). These films offer great potential in the field of sustainable packaging.

Facile synthesis of high strength hot-water wood extract films with oxygen-barrier performance

PubMed Central

Chen, Ge-Gu; Fu, Gen-Que; Wang, Xiao-Jun; Gong, Xiao-Dong; Niu, Ya-Shuai; Peng, Feng; Yao, Chun-Li; Sun, Run-Cang

2017-01-01

Biobased nanocomposite films for food packaging with high mechanical strength and good oxygen-barrier performance were developed using a hot-water wood extract (HWE). In this work, a facile approach to produce HWE/montmorillonite (MMT) based nanocomposite films with excellent physical properties is described. The focus of this study was to determine the effects of the MMT content on the structure and mechanical properties of nanocomposites and the effects of carboxymethyl cellulose (CMC) on the physical properties of the HWE-MMT films. The experimental results suggested that the intercalation of HWE and CMC in montmorillonite could produce compact, robust films with a nacre-like structure and multifunctional characteristics. This results of this study showed that the mechanical properties of the film designated FCMC0.05 (91.5 MPa) were dramatically enhanced because the proportion of HWE, MMT and CMC was 1:1.5:0.05. In addition, the optimized films exhibited an oxygen permeability below 2.0 cm3 μm/day·m2·kPa, as well as good thermal stability due to the small amount of CMC. These results provide a comprehensive understanding for further development of high-performance nanocomposites which are based on natural polymers (HWE) and assembled layered clays (MMT). These films offer great potential in the field of sustainable packaging. PMID:28112259

Preconceptional genetic carrier testing and the commercial offer directly-to-consumers

PubMed Central

Borry, Pascal; Henneman, Lidewij; Lakeman, Phillis; ten Kate, Leo P.; Cornel, Martina C.; Howard, Heidi C.

2011-01-01

Recently, a number of commercial companies are offering preconceptional carrier tests directly-to-consumers. This offer raises a number of concerns and issues above and beyond those encountered with preconceptional tests offered within the traditional health care setting. In order to bring some of these issues to light and to initiate dialogue on this topic, this article discusses the following issues: the current offer of preconceptional carrier tests (until the end of 2010) through online commercial companies; the implications for the informed consent procedure and the need for good information; the need for medical supervision and follow-up; and the appropriate use of existing resources. The article concludes with some reflections about the potential sustainability of the offer of preconceptional carrier tests directly-to-consumers. PMID:21362685

Stepping stones for biological invasion: A bioeconomic model of transferable risk

Treesearch

Travis Warziniack; David Finnoff; Jonathan Bossenbroek; Jason F. Shogren; David Lodge

2011-01-01

We investigate three sources of bias in valuation methods for ecosystem risk: failure to consider substitution possibilities between goods, failure to consider nonseparability of ecosystem services with market goods, and failure to consider substitution possibilities between ecosystems. The first two biases are known in the literature, and we offer insight on the size...

The Good Life of Teaching or the Life of Good Teaching?

ERIC Educational Resources Information Center

Regelski, Thomas A.

2012-01-01

In his recent monograph, Chris Higgins (2011) offers a remarkably original, thoughtful, and provocative argument for "an ethics of professional practice" for teachers. His study brings together a wealth of ideas and authors not often discussed in relation to each other, and it draws out elusive themes and ideas often overlooked in most…

Principles of Good School Building Design. School Buildings Planning, Design, and Construction Series No. 3.

ERIC Educational Resources Information Center

Odell, John H.

A school construction guide offers key personnel in school development projects information on the complex task of master planning and construction of schools in Australia. This chapter of the guide provides advice on school building design issues, such as the fundamentals of good design and designs that accommodate change, issues affecting…

Public Discourse: Creating the Conditions for Dialogue Concerning the Common Good in a Postmodern Heterogeneous Democracy.

ERIC Educational Resources Information Center

Geren, Peggy Ruth

2001-01-01

Offers a philosophical history of the nature of public discourse, describing it as a basic constituent of human rights. Analyzes the dichotomy between the common good and tolerance and protection of pluralism. Discusses the philosophical views of Condorcet, Jefferson, Dewey, and Habermas, portraying public discourse in relation to the…

A Good Sub Is Hard To Find: Recruiting and Retaining Temporary Staff for Child Care Programs.

ERIC Educational Resources Information Center

Bellm, Dan; Whitebook, Marcy

Addressed to teachers, administrators, resource and referral workers, and substitutes, this booklet offers advice about finding and retaining good substitute child care workers. Sections concern (1) causes of the "crisis" in substitute care, including the expansion of child care, provider turnover, shortage of elementary school teachers, low pay,…

Consultancy as Temporary Leadership: Negotiating Power in Everyday Practice

ERIC Educational Resources Information Center

Mowles, Chris

2009-01-01

Orthodox theories of consultancy address power relations between the consultant and their contractors. However, they can suggest that either the consultant should manipulate those they work with "for the good", or they should give up their power "for the good". This article offers an ethical critique of these points of view and argues for an…

Objective Assessment of General Surgery Residents Followed by Remediation.

PubMed

Gas, Becca L; Buckarma, EeeLN H; Mohan, Monali; Pandian, T K; Farley, David R

Surgical training programs often lack objective assessment strategies. Complicated scheduling characteristics frequently make it difficult for surgical residents to undergo formal assessment; actually having the time and opportunity to remediate poor performance is an even greater problem. We developed a novel methodology of assessment for residents and created an efficient remediation system using a combination of simulation, online learning, and self-assessment options. Postgraduate year (PGY) 2 to 5 general surgery (GS) residents were tested in a 5 station, objective structured clinical examination style event called the Surgical X-Games. Stations were 15 minutes in length and tested both surgical knowledge and technical skills. Stations were scored on a scale of 1 to 5 (1 = Fail, 2 = Mediocre, 3 = Pass, 4 = Good, and 5 = Stellar). Station scores ≤ 2 were considered subpar and required remediation to a score ≥ 4. Five remediation sessions allowed residents the opportunity to practice the stations with staff surgeons. Videos of each skill or test of knowledge with clear instructions on how to perform at a stellar level were offered. Trainees also had the opportunity to checkout take-home task trainers to practice specific skills. Residents requiring remediation were then tested again in-person or sent in self-made videos of their performance. Academic medical center. PGY2, 3, 4, and 5 GS residents at Mayo Clinic in Rochester, MN. A total of, 35 residents participated in the Surgical X-Games in the spring of 2015. Among all, 31 (89%) had scores that were deemed subpar on at least 1 station. Overall, 18 (58%) residents attempted remediation. All 18 (100%) achieved a score ≥ 4 on the respective stations during a makeup attempt. Overall X-Games scores and those of PGY2s, 3s, and 4s were higher after remediation (p < 0.05). No PGY5s attempted remediation. Despite difficulties with training logistics and busy resident schedules, it is feasible to objectively assess most GS trainees and offer opportunities to remediate if performance is poor. Our multifaceted remediation methodology allowed 18 residents to achieve good or stellar performance on each station after deliberate practice. Enticing chief residents to participate in remediation efforts in the spring of their final year of training remains a work in progress. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Enhanced electrochemical performance of amorphous carbon nanotube-manganese-di-oxide-poly-pyrrole ternary nanohybrid

NASA Astrophysics Data System (ADS)

Pahari, D.; Das, N. S.; Das, B.; Howli, P.; Chattopadhyay, K. K.; Banerjee, D.

2017-12-01

Amorphous carbon nanotubes (a-CNTs) manganese di oxide (MnO2)-poly pyrrole (PPy) ternary nanocomposites have been synthesized by a simple chemical route. The as prepared samples have been characterized with different characterization tools that include field emission scanning and high resolution transmission electron microscopy, Raman, Fourier transformed infrared as well as UV-Vis spectroscopy. The electrochemical performance of all the as prepared pure and hybrid samples have been studied in detail. It has been seen that the ternary hybrid shows efficient electrochemical performance with high value of specific capacitance with good stability even up to 2000 cycles. The superior performance of the hybrid samples can be attributed to the strong synergistic effect between the components resulting electron shuttling along PPy main chains and inter-chain raising built-in continuous conductive network. The ternary composite approach offers an effective solution to enhance the device performance of metal-oxide based supercapacitors for long cycling applications. These studies can well speculate the existence of another supercapacitor hybrid for the use in environment friendly electrode and thus a pollution free nature.

Surgical Technique of Hemi-Face Transplant: A New Model of Training.

PubMed

Cunico, Caroline; Duarte da Silva, Alfredo Benjamim; Brum, Juliana Sperotto; Robes, Rogério Ribeiro; da Silva Freitas, Renato

2016-05-01

Face transplantation from cadaveric donors is an alternative that has been explored as a way to overcome the disadvantages of reconstructive plastic surgery for patients with severe facial deformities, when its approaches are not able to offer good aesthetic and functional results. In this study, the authors describe the surgical technique of face transplantation in swine, investigating the reproducibility of the methods as an experimental model in transplantation. Seven swines were operated upon. After euthanasia, the left hemifacial area was removed and implanted onto the same location on the same animal from which it was removed. The vascular pedicle was based on the facial artery, the caudal auricular artery, and the external jugular vein. The ventral buccal and dorsal buccal branches of the facial nerve and the transverse facial branch of the auricular nerve were taken into the flap. The mean time of the procedure was 4.5 hours. Differences in vascularization were found as the vessel that provides blood supply to auricular region can be the caudal auricular artery, instead of the temporal artery, as described in the literature. Operative difficulty increases if the animal is more obese. The medical student had training in microsurgical procedures to be able to perform the entire procedure. This study describes an experimental model of face transplantation in swine, providing a good model for training of the surgical technique. The method is reproducible in any setting that offers resources in experimental surgery and microsurgery.

Mobility of lightweight robots over snow

NASA Astrophysics Data System (ADS)

Lever, James H.; Shoop, Sally A.

2006-05-01

Snowfields are challenging terrain for lightweight (<50 kg) unmanned ground vehicles. Deep sinkage, high snowcompaction resistance, traction loss while turning and ingestion of snow into the drive train can cause immobility within a few meters of travel. However, for suitably designed vehicles, deep snow offers a smooth, uniform surface that can obliterate obstacles. Key requirements for good over-snow mobility are low ground pressure, large clearance relative to vehicle size and a drive system that tolerates cohesive snow. A small robot will invariably encounter deep snow relative to its ground clearance. Because a single snowstorm can easily deposit 30 cm of fresh snow, robots with ground clearance less than about 10 cm must travel over the snow rather than gain support from the underlying ground. This can be accomplished using low-pressure tracks (< 1.5 kPa). Even still, snow-compaction resistance can exceed 20% of vehicle weight. Also, despite relatively high traction coefficients for low track pressures, differential or skid steering is difficult because the outboard track can easily break traction as the vehicle attempts to turn against the snow. Short track lengths (relative to track separation) or coupled articulated robots offer steering solutions for deep snow. This paper presents preliminary guidance to design lightweight robots for good mobility over snow based on mobility theory and tests of PackBot, Talon and SnoBot, a custom-designed research robot. Because many other considerations constrain robot designs, this guidance can help with development of winterization kits to improve the over-snow performance of existing robots.

28 CFR Appendix B to Part 36 - Preamble to Regulation on Nondiscrimination on the Basis of Disability by Public Accommodations...

Code of Federal Regulations, 2010 CFR

2010-07-01

... that limited his or her enjoyment of the goods or services being offered. For example, persons with.... It also applies, in accordance with section 309 of the ADA, to private entities that offer... relay services. Title IV of the Act provides adequate protections for ensuring the confidentiality of...

What Is yet to Come? Three Propositions on the Future of Educational Research as a Common Good

ERIC Educational Resources Information Center

Decuypere, Mathias

2015-01-01

This paper offers some explorative notes accompanying the issues I addressed in the journal's moot, which took place at the ECER 2014 conference (Porto, September 1-5). The notes that follow are explicitly written through the eyes of an emerging researcher, and offer three propositions regarding the future of educational research. These three…

Accountability for quality of care: Monitoring all aspects of quality across a framework adapted for action.

PubMed

Hulton, Louise; Matthews, Zoë; Bandali, Sarah; Izge, Abubakar; Daroda, Ramatu; Stones, William

2016-01-01

Quality of care is essential to maternal and newborn survival. The multidimensional nature of quality of care means that frameworks are useful for capturing it. The present paper proposes an adaptation to a widely used quality of care framework for maternity services. The framework subdivides quality into two inter-related dimensions-provision and experience of care-but suggests adaptations to reflect changes in the concept of quality over the past 15years. The application of the updated framework is presented in a case study, which uses it to measure and inform quality improvements in northern Nigeria across the reproductive, maternal, newborn, and child health continuum of care. Data from 231 sampled basic and comprehensive emergency obstetric and newborn care (BEmONC and CEmONC) facilities in six northern Nigerian states showed that only 35%-47% of facilities met minimum quality standards in infrastructure. Standards for human resources performed better with 49%-73% reaching minimum standards. A framework like this could form the basis for a certification scheme. Certification offers a practical and concrete opportunity to drive quality standards up and reward good performance. It also offers a mechanism to strengthen accountability. Copyright © 2015 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

The Basic Principles and Methods of the System Approach to Compression of Telemetry Data

NASA Astrophysics Data System (ADS)

Levenets, A. V.

2018-01-01

The task of data compressing of measurement data is still urgent for information-measurement systems. In paper the basic principles necessary for designing of highly effective systems of compression of telemetric information are offered. A basis of the offered principles is representation of a telemetric frame as whole information space where we can find of existing correlation. The methods of data transformation and compressing algorithms realizing the offered principles are described. The compression ratio for offered compression algorithm is about 1.8 times higher, than for a classic algorithm. Thus, results of a research of methods and algorithms showing their good perspectives.

Good things come to those who wait: late first offers facilitate creative agreements in negotiation.

PubMed

Sinaceur, Marwan; Maddux, William W; Vasiljevic, Dimitri; Perez Nückel, Ricardo; Galinsky, Adam D

2013-06-01

Although previous research has shown that making the first offer leads to a distributive advantage in negotiations, the current research explored how the timing of first offers affects the creativity of negotiation agreements. We hypothesized that making the first offer later rather than earlier in the negotiation would facilitate the discovery of creative agreements that better meet the parties' underlying interests. Experiment 1 demonstrated that compared with early first offers, late first offers facilitated creative agreements that better met the parties' underlying interests. Experiments 2a and 2b controlled for the duration of the negotiation and conceptually replicated this effect. The last two studies also demonstrated that the beneficial effect of late first offers was mediated by greater information exchange. Thus, negotiators need to consider the timing of first offers to fully capitalize on the first offer advantage. Implications for our understanding of creativity, motivated information exchange, and timing in negotiations are discussed.

Employer and Employee Opinions About Workplace Health Promotion (Wellness) Programs: Results of the 2015 Harris Poll Nielsen Survey.

PubMed

McCleary, Katherine; Goetzel, Ron Z; Roemer, Enid Chung; Berko, Jeff; Kent, Karen; Torre, Hector De La

2017-03-01

The aim of this study was to provide a current picture of the state of workplace health promotion (wellness) programs in the U.S. from both employer and employee perspectives. We analyzed data from two independent surveys of employers (N = 1500) and the general population (N = 4611). Employers reported offering wellness programs at almost twice the rate of employees who reported having these programs available to them. Most (59.4%) employees felt employers should play a role in improving worker health and nearly three-fourths (72.1%) thought that lower insurance premiums should be offered for participation in wellness programs. However, fewer than half felt that their work environment allows them to maintain good health. Although wellness programs are offered at the majority of workplaces in the U.S., employees are unlikely to be aware of these efforts and would like employers to be forthcoming in providing programs promoting good health.

You and your manager: reducing workplace stress by creating and maintaining a good relationship.

PubMed

Hills, Laura Sachs

2007-01-01

The relationship a medical practice employee has with his or her practice manager is probably the most important relationship the employee will have at work. No matter what position an employee has in the medical practice, it's to his or her advantage to get along well with the practice manager. This article offers concrete suggestions to medical practice employees to help them establish and cultivate a positive working relationship with their practice managers. It examines different working styles of practice managers and suggests strategies for medical practice employees who want or need different amounts and styles of supervision. It describes five personal characteristics a practice manager expects in employees and two basic rules of thumb for using the practice manager's time efficiently. This article also emphasizes the importance of good communication with the practice manager and offers 12 practical and specific tips for building the employee-practice manager relationship. Finally, this article offers advice to medical practice employees about what to do when they disagree with their practice managers.

A Satellite-Based Infrastructure Providing Broadband IP Services on Board High Speed Trains

NASA Astrophysics Data System (ADS)

Feltrin, Eros; Weller, Elisabeth

After the earlier technologies that offered satellite mobile services for civil and military applications, today’s specific antenna design, modulation techniques and most powerful new generation satellites also allow a good level of performance to be achieved on-board high speed modes of transport such as aircraft and trains. This paper reports the Eutelsat’s experience in the developing and deploying architecture based on a spread spectrum system in order to provide broadband connectivity on board of high speed trains. After introducing the adopted technologies, the architecture and the constraints, some results obtained from analysis, testing and measuring of the availability of the service are reported and commented upon.

Advances in Optical Fiber-Based Faraday Rotation Diagnostics

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, A D; McHale, G B; Goerz, D A

2009-07-27

In the past two years, we have used optical fiber-based Faraday Rotation Diagnostics (FRDs) to measure pulsed currents on several dozen capacitively driven and explosively driven pulsed power experiments. We have made simplifications to the necessary hardware for quadrature-encoded polarization analysis, including development of an all-fiber analysis scheme. We have developed a numerical model that is useful for predicting and quantifying deviations from the ideal diagnostic response. We have developed a method of analyzing quadrature-encoded FRD data that is simple to perform and offers numerous advantages over several existing methods. When comparison has been possible, we have seen good agreementmore » with our FRDs and other current sensors.« less

Design and test of data acquisition systems for the Medipix2 chip based on PC standard interfaces

NASA Astrophysics Data System (ADS)

Fanti, Viviana; Marzeddu, Roberto; Piredda, Giuseppina; Randaccio, Paolo

2005-07-01

We describe two readout systems for hybrid detectors using the Medipix2 single photon counting chip, developed within the Medipix Collaboration. The Medipix2 chip (256×256 pixels, 55 μm pitch) has an active area of about 2 cm 2 and is bump-bonded to a pixel semiconductor array of silicon or other semiconductor material. The readout systems we are developing are based on two widespread standard PC interfaces: parallel port and USB (Universal Serial Bus) version 1.1. The parallel port is the simplest PC interface even if slow and the USB is a serial bus interface present nowadays on all PCs and offering good performances.

E-commerce and its Impact on Logistics Requirements

NASA Astrophysics Data System (ADS)

Zákorová, Eva

2017-05-01

The contribution will focus on the development of e-commerce. The extent of the development of internet by age category will be assessed and the development of this factor will be monitored by correlation analysis. Analysis of logistics operators will be performed in the field courier, express and parcel shipments. Market competitiveness B2C will focus on flexibility in delivery, evening delivery or on weekends, term delivery (increasing the cost of tracking shipments and their records), use and offering banking products with secure payment system, readiness deliver the goods via its own fueling point. On the contrary, legal provision regulating the entrance to the parking are, entrance into pedestrian zone service may limit or prevent.

Compact ultra wide band microstrip bandpass filter based on multiple-mode resonator and modified complementary split ring resonator.

PubMed

Marcotegui, J Antonio; Illescas, Jesús Miguel; Estevez, Aritz; Falcone, Francisco

2013-01-01

A new class of broadband microstrip filters for Ultra Wide Band (UWB) applications is proposed. In the design, different stages of parallel-coupled microstrip line and other stages with a Modified Complementary Split Ring Resonator (MCSRR)-a concept proposed here for the first time-are adjusted to obtain the desired response with broadband, sharp rejection, low insertion loss, and low return loss. Full wave simulation results as well as measurement results from fabricated prototypes are presented, showing good agreement. The proposed technique offers a new alternative to implement low-cost high-performance filter devices, applicable to a wide range of communication systems.

Compact Ultra Wide Band Microstrip Bandpass Filter Based on Multiple-Mode Resonator and Modified Complementary Split Ring Resonator

PubMed Central

Marcotegui, J. Antonio; Illescas, Jesús Miguel; Estevez, Aritz

2013-01-01

A new class of broadband microstrip filters for Ultra Wide Band (UWB) applications is proposed. In the design, different stages of parallel-coupled microstrip line and other stages with a Modified Complementary Split Ring Resonator (MCSRR)—a concept proposed here for the first time—are adjusted to obtain the desired response with broadband, sharp rejection, low insertion loss, and low return loss. Full wave simulation results as well as measurement results from fabricated prototypes are presented, showing good agreement. The proposed technique offers a new alternative to implement low-cost high-performance filter devices, applicable to a wide range of communication systems. PMID:24319366

Optically transparent FTO-free cathode for dye-sensitized solar cells.

PubMed

Kavan, Ladislav; Liska, Paul; Zakeeruddin, Shaik M; Grätzel, Michael

2014-12-24

The woven fabric containing electrochemically platinized tungsten wire is an affordable flexible cathode for liquid-junction dye-sensitized solar cells with the I3(-)/I(-) redox mediator and electrolyte solution consisting of ionic liquids and propionitrile. The fabric-based electrode outperforms the thermally platinized FTO in serial ohmic resistance and charge-transfer resistance for triiodide reduction, and it offers comparable or better optical transparency in the visible and particularly in the near-IR spectral region. The electrode exhibits good stability during electrochemical loading and storage at open circuit. The dye-sensitized solar cells with a C101-sensitized titania photoanode and either Pt-W/PEN or Pt-FTO cathodes show a comparable performance.

[Pancreaticojejunal anastomosis. Indication, technique and results].

PubMed

Gebhardt, C

2001-01-01

Pancreaticojejunal anastomosis. Indication, technique and results. Pancreaticojejunal anastomoses are performed for the treatment of chronic pancreatitis and after resection of pancreatic carcinomas. In chronic pancreatitis by drainage procedures (Partington-Rochelle and Puestow-Gillesby) one can expect good long term results, if the diameter of the pancreatic duct is at least 1 cm and the length of the anastomosis 6 cm. The duodenumpreserving head resection (Beger or Frey) is a combination of resection and drainage and is significant in the therapy of inflammatory head processes. In the surgical treatment of pancreatic carcinomas pancreaticojejunostomies are applied after head resection (Whipple-, pyloruspreserving modification). The end-to-side mucosa-mucosa anastomosis offers the best results concerning postoperativ complications and mortality rates.

Quality Control of Laser-Beam-Melted Parts by a Correlation Between Their Mechanical Properties and a Three-Dimensional Surface Analysis

NASA Astrophysics Data System (ADS)

Grimm, T.; Wiora, G.; Witt, G.

2017-03-01

Good correlations between three-dimensional surface analyses of laser-beam-melted parts of nickel alloy HX and their mechanical properties were found. The surface analyses were performed with a confocal microscope, which offers a more profound surface data basis than a conventional, two-dimensional tactile profilometry. This new approach results in a wide range of three-dimensional surface parameters, which were each evaluated with respect to their feasibility for quality control in additive manufacturing. As a result of an automated surface analysis process by the confocal microscope and an industrial six-axis robot, the results are an innovative approach for quality control in additive manufacturing.

Highly stable multi-wavelength erbium-doped fiber linear laser based on modal interference

NASA Astrophysics Data System (ADS)

Herrera-Piad, L. A.; Jauregui-Vazquez, D.; Lopez-Dieguez, Y.; Estudillo-Ayala, J. M.; Hernandez-Garcia, J. C.; Sierra-Hernandez, J. M.; Bianchetti, M.; Rojas-Laguna, R.

2018-03-01

We report a linear fiber laser cavity based on an all-fiber Fabry-Perot interferometer and bi-tapered optical fiber for multi-wavelength emission generation. Curvature and strain are used to operate the laser system and the number of lines as well, the emission regions are stronger related to the physical effect applied, due to the phase alteration between the multiple fiber optic modes involved. The original laser emissions present zero wavelength variations, minimal power fluctuations and small spacing mode (1 nm). Additionally, a nonlinear fiber was employed trying to improve the performance of the multiple lasing lines. This system offers a low implementation cost, compactness and good laser parameters.

Working towards the informationist.

PubMed

Oliver, Kathleen B; Roderer, Nancy K

2006-03-01

Current information is a critical component of good healthcare. In this article we offer a definition of a new health professional, the 'informationist', whose function it is to ensure evidence-based health practice. We describe the literature and discussions that led to the proposal of this new role, and offer a description of the steps being taken to further elaborate this career. In particular, we describe efforts at Johns Hopkins to train informationists and informaticists and to offer services that lead to the integration of these and other information professionals into clinical care, public health and research.

Thermal evaporation-induced anhydrous synthesis of Fe3O4-graphene composite with enhanced rate performance and cyclic stability for lithium ion batteries.

PubMed

Dong, Yucheng; Ma, Ruguang; Hu, Mingjun; Cheng, Hua; Yang, Qingdan; Li, Yang Yang; Zapien, Juan Antonio

2013-05-21

We present a high-yield and low cost thermal evaporation-induced anhydrous strategy to prepare hybrid materials of Fe3O4 nanoparticles and graphene as an advanced anode for high-performance lithium ion batteries. The ~10-20 nm Fe3O4 nanoparticles are densely anchored on conducting graphene sheets and act as spacers to keep the adjacent sheets separated. The Fe3O4-graphene composite displays a superior battery performance with high retained capacity of 868 mA h g(-1) up to 100 cycles at a current density of 200 mA g(-1), and 539 mA h g(-1) up to 200 cycles when cycling at 1000 mA g(-1), high Coulombic efficiency (above 99% after 200 cycles), good rate capability, and excellent cyclic stability. The simple approach offers a promising route to prepare anode materials for practical fabrication of lithium ion batteries.

The effect and biological mechanism of granular sludge size on performance of autotrophic nitrogen removal system.

PubMed

Ya-Juan, Xing; Jun-Yuan, Ji; Ping, Zheng; Lan, Wang; Abbas, Ghulam; Zhang, Jiqiang; Ru, Wang; Zhan-Fei, He

2018-05-31

The autotrophic process for nitrogen removal has attracted worldwide attention in the field of wastewater treatment, and the performance of this process is greatly influenced by the size of granular sludge particles present in the system. In this work, the granular sludge was divided into three groups, i.e. large size (> 1.2 mm), medium size (0.6-1.2 mm) and small size (< 0.6 mm). The medium granular sludge was observed to dominate at high volumetric nitrogen loading rates, while offering strong support for good performance. Its indispensable contribution was found to originate from improved settling velocity (0.84 ± 0.10 cm/s), high SOUR-A (specific oxygen uptake rate for ammonia oxidizing bacteria, 25.93 mg O 2 /g MLVSS/h), low SOUR-N (specific oxygen uptake rate for nitrite oxidizing bacteria, 3.39 mg O 2 /g MLVSS/h), and a reasonable microbial spatial distribution.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang, Kun; Marcus, Kyle; Yang, Zhenzhong

In this work, a freestanding NiFe oxyfluoride (NiFeOF) holey film was prepared by electrochemical deposition and anodic treatments. With the combination of good electrical conductivity and holey structure, the NiFeOF holey film offers superior electrochemical performance, due to the following reasons: (i) The residual metal alloy framework can be used as the current collector to improve electrode conductivity. Moreover, the as-prepared freestanding NiFeOF holey film can be used as a supercapacitor electrode without reliance on binders and other additives. The residual metal alloy framework and binder-free electrode effectively reduces electrode resistance, thus improving electron transport. (ii) The highly interconnected holeymore » structure and hierarchical pore distribution provides a high specific surface area to improve electron transport, enhancing rapid ion transport and mitigating diffusion limitations throughout the holey film. (iii) The excellent mechanical characteristics facilitate flexibility and cyclability related performance. Additionally, the NiFeOF holey film presents exceptional electrochemical performance, showing that it is a promising alternative for small/micro-size electronic devices.« less

RXIO: Design and implementation of high performance RDMA-capable GridFTP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tian, Yuan; Yu, Weikuan; Vetter, Jeffrey S.

2011-12-21

For its low-latency, high bandwidth, and low CPU utilization, Remote Direct Memory Access (RDMA) has established itself as an effective data movement technology in many networking environments. However, the transport protocols of grid run-time systems, such as GridFTP in Globus, are not yet capable of utilizing RDMA. In this study, we examine the architecture of GridFTP for the feasibility of enabling RDMA. An RDMA-capable XIO (RXIO) framework is designed and implemented to extend its XIO system and match the characteristics of RDMA. Our experimental results demonstrate that RDMA can significantly improve the performance of GridFTP, reducing the latency by 32%more » and increasing the bandwidth by more than three times. In achieving such performance improvements, RDMA dramatically cuts down CPU utilization of GridFTP clients and servers. In conclusion, these results demonstrate that RXIO can effectively exploit the benefits of RDMA for GridFTP. It offers a good prototype to further leverage GridFTP on wide-area RDMA networks.« less

Durham extremely large telescope adaptive optics simulation platform.

PubMed

Basden, Alastair; Butterley, Timothy; Myers, Richard; Wilson, Richard

2007-03-01

Adaptive optics systems are essential on all large telescopes for which image quality is important. These are complex systems with many design parameters requiring optimization before good performance can be achieved. The simulation of adaptive optics systems is therefore necessary to categorize the expected performance. We describe an adaptive optics simulation platform, developed at Durham University, which can be used to simulate adaptive optics systems on the largest proposed future extremely large telescopes as well as on current systems. This platform is modular, object oriented, and has the benefit of hardware application acceleration that can be used to improve the simulation performance, essential for ensuring that the run time of a given simulation is acceptable. The simulation platform described here can be highly parallelized using parallelization techniques suited for adaptive optics simulation, while still offering the user complete control while the simulation is running. The results from the simulation of a ground layer adaptive optics system are provided as an example to demonstrate the flexibility of this simulation platform.

Harvesting microalgal biomass using a magnetically induced membrane vibration (MMV) system: filtration performance and energy consumption.

PubMed

Bilad, M R; Discart, V; Vandamme, D; Foubert, I; Muylaert, K; Vankelecom, Ivo F J

2013-06-01

This study was performed to investigate the effectiveness of submerged microfiltration to harvest both a marine diatom Phaeodactylum tricornutum and a Chlorella vulgaris in a recently developed magnetically induced membrane vibrating (MMV) system. We assess the filtration performance by conducting the improved flux step method (IFM), fed-batch concentration filtrations and membrane fouling autopsy using two lab-made membranes with different porosity. The full-scale energy consumption was also estimated. Overall results suggest that the MMV offers a good fouling control and the process was proven to be economically attractive. By combining the membrane filtration (15× concentration) with centrifugation to reach a final concentration of 25% w/v, the energy consumption to harvest P. tricornutum and C. vulgaris was, respectively, as low as 0.84 and 0.77kWh/m(3), corresponding to 1.46 and 1.39 kWh/kg of the harvested biomass. Copyright © 2013 Elsevier Ltd. All rights reserved.

Improving queuing service at McDonald's

NASA Astrophysics Data System (ADS)

Koh, Hock Lye; Teh, Su Yean; Wong, Chin Keat; Lim, Hooi Kie; Migin, Melissa W.

2014-07-01

Fast food restaurants are popular among price-sensitive youths and working adults who value the conducive environment and convenient services. McDonald's chains of restaurants promote their sales during lunch hours by offering package meals which are perceived to be inexpensive. These promotional lunch meals attract good response, resulting in occasional long queues and inconvenient waiting times. A study is conducted to monitor the distribution of waiting time, queue length, customer arrival and departure patterns at a McDonald's restaurant located in Kuala Lumpur. A customer survey is conducted to gauge customers' satisfaction regarding waiting time and queue length. An android app named Que is developed to perform onsite queuing analysis and report key performance indices. The queuing theory in Que is based upon the concept of Poisson distribution. In this paper, Que is utilized to perform queuing analysis at this McDonald's restaurant with the aim of improving customer service, with particular reference to reducing queuing time and shortening queue length. Some results will be presented.

Low Wages = Low Quality: Solving the Real Preschool Teacher Crisis. NIEER Preschool Policy Matters, Issue 3.

ERIC Educational Resources Information Center

Barnett, W. Steven

Recruiting and retaining good teachers ranks as one of the most significant roadblocks to solving the preschool quality crises facing the country. Evidence points to the low wages and benefits offered to preschool teachers as the single most important factor in hiring and keeping good teachers. This policy brief examines what is known about the…

The procurement of cells for the derivation of human embryonic stem cell lines for therapeutic use: recommendations for good practice.

PubMed

Murdoch, Alison; Braude, Peter; Courtney, Aidan; Brison, Daniel; Hunt, Charles; Lawford-Davies, James; Moore, Harry; Stacey, Glyn; Sethe, Sebastian

2012-03-01

The donation of human embryos for the derivation of embryonic stem cell lines that may be used in the development of therapeutic products raises more complex ethical, practical and regulatory problems than the donation of embryos for non-clinical research. This review considers these issues and offers recommendations for good practice.

77 FR 16574 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-21

... ``customer'' is any person who is or may be required to pay for goods or services through telemarketing. A... Permit Holder to inquire about a product or service offered by the Trading Permit Holder within the three... or provide any goods or services, a provision under which a customer receives a product or service...

Good Practice in Promoting Gender Equality in Higher Education in Central and Eastern Europe. Studies on Higher Education.

ERIC Educational Resources Information Center

Grunberg, Laura

This volume publishes the results of the United Nations Educational, Scientific, and Cultural Organization (UNESCO) European Centre for Higher Education (CEPES) project, Good Practice in Promoting Gender Inequality in Higher Education in Central and Eastern Europe and the former Soviet Countries. These case studies offer hope for a future in which…

Seeking Lodging and the Best Lights: The Challenge of Teaching

ERIC Educational Resources Information Center

Cottle, Thomas J.

2008-01-01

This article offers yet another look at the challenge of teaching, in this case through the eyes of writers like John Passmore, Michael Novak, and Emmanuel Levinas. It is an attempt to combine the fundamental qualities of good teaching as set forth by Passmore, with the notion of "caritas", literally meaning willing the good of the other, and the…

Advanced screening of electrode couples

NASA Technical Reports Server (NTRS)

Giner, J. D.; Cahill, K.

1980-01-01

The chromium (Cr(3+)/Cr(2+)) redox couple (electrolyte and electrode) was investigated to determine its suitability as negative electrode for the iron (Fe(3+)/Fe(2+))-chromium (Cr(3+)/Cr(2+)) redox flow battery. Literature search and laboratory investigation established that the solubility and stability of aqueous acidic solutions of chromium(3) chloride and chromium(2) chloride are sufficient for redox battery application. Four categories of electrode materials were tested; namely, metals and metalloid materials (elements and compounds), alloys, plated materials, and Teflon-bonded materials. In all, the relative performance of 26 candidate electrode materials was evaluated on the basis of slow scan rate linear sweep voltammetry in stirred solution. No single material tested gave both acceptable anodic an acceptable cathodic performance. However, the identification of lead as a good cathodic electrocatalyst and gold as a good anodic electrocatalyst led to the invention of the lead/gold combination electrocatalyst. This type of catalyst can be fabricated in several ways and appears to offer the advantages of each metal without the disadvantages associated with their use as single materials. This lead/gold electrocatalyst was tested by NASA-Lewis Research Center in complete, flowing, redox batteries comprising a stack of several cells. A large improvement in the battery's coulombic and energy efficiency was observed.

ProMIS augmented reality training of laparoscopic procedures face validity.

PubMed

Botden, Sanne M B I; Buzink, Sonja N; Schijven, Marlies P; Jakimowicz, Jack J

2008-01-01

Conventional video trainers lack the ability to assess the trainee objectively, but offer modalities that are often missing in virtual reality simulation, such as realistic haptic feedback. The ProMIS augmented reality laparoscopic simulator retains the benefit of a traditional box trainer, by using original laparoscopic instruments and tactile tasks, but additionally generates objective measures of performance. Fifty-five participants performed a "basic skills" and "suturing and knot-tying" task on ProMIS, after which they filled out a questionnaire regarding realism, haptics, and didactic value of the simulator, on a 5-point-Likert scale. The participants were allotted to 2 experience groups: "experienced" (>50 procedures and >5 sutures; N = 27), and "moderately experienced" (<50 procedures and <5 sutures; N = 28). General consensus among all participants, particularly the experienced, was that ProMIS is a useful tool for training (mean: 4.67, SD: 0.48). It was considered very realistic (mean: 4.44, SD: 0.66), with good haptics (mean: 4.10, SD: 0.97) and didactic value (mean 4.10, SD: 0.65). This study established the face validity of the ProMIS augmented reality simulator for "basic skills" and "suturing and knot-tying" tasks. ProMIS was considered a good tool for training in laparoscopic skills for surgical residents and surgeons.

Monodisperse MnO2@NiCo2O4 core/shell nanospheres with highly opened structures as electrode materials for good-performance supercapacitors

NASA Astrophysics Data System (ADS)

Zhou, You; Ma, Li; Gan, Mengyu; Ye, Menghan; Li, Xiurong; Zhai, Yanfang; Yan, Fabing; Cao, Feifei

2018-06-01

The monodisperse MnO2@NiCo2O4 core/shell nanospheres for good-performance supercapacitors are designed and synthesized by a two-step solution-based method and a simple post annealing process. In the composite, both MnO2 (the "core") and NiCo2O4 (the "shell") are formed by the accumulation of nanoflakes. Thus, nearly all the core/shell nanoflakes are highly opened and accessible to electrolyte, making them give full play to the Faradaic reaction. Our results demonstrate that the composite electrode exhibits desirable pseudocapacitive behaviors with higher specific capacitance (1127.27 F g-1 at a current density of 1 A g-1), better rate capability (81.0% from 1 to 16 A g-1) and superior cycling stability (actually 126.8% capacitance retention after 1000 cycles and only 3.7% loss after 10,000 cycles at 10 A g-1) in 3 M KOH aqueous solution. Moreover, it offers the excellent specific energy density of 26.6 Wh kg-1 at specific power density of 800 W kg-1. The present MnO2@NiCo2O4 core/shell nanospheres with remarkable electrochemical properties are considered as potential electrode materials for the next generation supercapacitors.

Black Molecular Adsorber Coatings for Spaceflight Applications

NASA Technical Reports Server (NTRS)

Abraham, Nithin Susan; Hasegawa, Mark Makoto; Straka, Sharon A.

2014-01-01

The molecular adsorber coating is a new technology that was developed to mitigate the risk of on-orbit molecular contamination on spaceflight missions. The application of this coating would be ideal near highly sensitive, interior surfaces and instruments that are negatively impacted by outgassed molecules from materials, such as plastics, adhesives, lubricants, epoxies, and other similar compounds. This current, sprayable paint technology is comprised of inorganic white materials made from highly porous zeolite. In addition to good adhesion performance, thermal stability, and adsorptive capability, the molecular adsorber coating offers favorable thermal control characteristics. However, low reflectivity properties, which are typically offered by black thermal control coatings, are desired for some spaceflight applications. For example, black coatings are used on interior surfaces, in particular, on instrument baffles for optical stray light control. Similarly, they are also used within light paths between optical systems, such as telescopes, to absorb light. Recent efforts have been made to transform the white molecular adsorber coating into a black coating with similar adsorptive properties. This result is achieved by optimizing the current formulation with black pigments, while still maintaining its adsorption capability for outgassing control. Different binder to pigment ratios, coating thicknesses, and spray application techniques were explored to develop a black version of the molecular adsorber coating. During the development process, coating performance and adsorption characteristics were studied. The preliminary work performed on black molecular adsorber coatings thus far is very promising. Continued development and testing is necessary for its use on future contamination sensitive spaceflight missions.

Black molecular adsorber coatings for spaceflight applications

NASA Astrophysics Data System (ADS)

Abraham, Nithin S.; Hasegawa, Mark M.; Straka, Sharon A.

2014-09-01

The molecular adsorber coating is a new technology that was developed to mitigate the risk of on-orbit molecular contamination on spaceflight missions. The application of this coating would be ideal near highly sensitive, interior surfaces and instruments that are negatively impacted by outgassed molecules from materials, such as plastics, adhesives, lubricants, epoxies, and other similar compounds. This current, sprayable paint technology is comprised of inorganic white materials made from highly porous zeolite. In addition to good adhesion performance, thermal stability, and adsorptive capability, the molecular adsorber coating offers favorable thermal control characteristics. However, low reflectivity properties, which are typically offered by black thermal control coatings, are desired for some spaceflight applications. For example, black coatings are used on interior surfaces, in particular, on instrument baffles for optical stray light control. Similarly, they are also used within light paths between optical systems, such as telescopes, to absorb light. Recent efforts have been made to transform the white molecular adsorber coating into a black coating with similar adsorptive properties. This result is achieved by optimizing the current formulation with black pigments, while still maintaining its adsorption capability for outgassing control. Different binder to pigment ratios, coating thicknesses, and spray application techniques were explored to develop a black version of the molecular adsorber coating. During the development process, coating performance and adsorption characteristics were studied. The preliminary work performed on black molecular adsorber coatings thus far is very promising. Continued development and testing is necessary for its use on future contamination sensitive spaceflight missions.

A μ analysis-based, controller-synthesis framework for robust bioinspired visual navigation in less-structured environments.

PubMed

Keshavan, J; Gremillion, G; Escobar-Alvarez, H; Humbert, J S

2014-06-01

Safe, autonomous navigation by aerial microsystems in less-structured environments is a difficult challenge to overcome with current technology. This paper presents a novel visual-navigation approach that combines bioinspired wide-field processing of optic flow information with control-theoretic tools for synthesis of closed loop systems, resulting in robustness and performance guarantees. Structured singular value analysis is used to synthesize a dynamic controller that provides good tracking performance in uncertain environments without resorting to explicit pose estimation or extraction of a detailed environmental depth map. Experimental results with a quadrotor demonstrate the vehicle's robust obstacle-avoidance behaviour in a straight line corridor, an S-shaped corridor and a corridor with obstacles distributed in the vehicle's path. The computational efficiency and simplicity of the current approach offers a promising alternative to satisfying the payload, power and bandwidth constraints imposed by aerial microsystems.

Advanced supersonic propulsion study, phases 3 and 4. [variable cycle engines

NASA Technical Reports Server (NTRS)

Allan, R. D.; Joy, W.

1977-01-01

An evaluation of various advanced propulsion concepts for supersonic cruise aircraft resulted in the identification of the double-bypass variable cycle engine as the most promising concept. This engine design utilizes special variable geometry components and an annular exhaust nozzle to provide high take-off thrust and low jet noise. The engine also provides good performance at both supersonic cruise and subsonic cruise. Emission characteristics are excellent. The advanced technology double-bypass variable cycle engine offers an improvement in aircraft range performance relative to earlier supersonic jet engine designs and yet at a lower level of engine noise. Research and technology programs required in certain design areas for this engine concept to realize its potential benefits include refined parametric analysis of selected variable cycle engines, screening of additional unconventional concepts, and engine preliminary design studies. Required critical technology programs are summarized.

Key Reconciliation for High Performance Quantum Key Distribution

PubMed Central

Martinez-Mateo, Jesus; Elkouss, David; Martin, Vicente

2013-01-01

Quantum Key Distribution is carving its place among the tools used to secure communications. While a difficult technology, it enjoys benefits that set it apart from the rest, the most prominent is its provable security based on the laws of physics. QKD requires not only the mastering of signals at the quantum level, but also a classical processing to extract a secret-key from them. This postprocessing has been customarily studied in terms of the efficiency, a figure of merit that offers a biased view of the performance of real devices. Here we argue that it is the throughput the significant magnitude in practical QKD, specially in the case of high speed devices, where the differences are more marked, and give some examples contrasting the usual postprocessing schemes with new ones from modern coding theory. A good understanding of its implications is very important for the design of modern QKD devices. PMID:23546440

State-of-the-art in Heterogeneous Computing

DOE PAGES

Brodtkorb, Andre R.; Dyken, Christopher; Hagen, Trond R.; ...

2010-01-01

Node level heterogeneous architectures have become attractive during the last decade for several reasons: compared to traditional symmetric CPUs, they offer high peak performance and are energy and/or cost efficient. With the increase of fine-grained parallelism in high-performance computing, as well as the introduction of parallelism in workstations, there is an acute need for a good overview and understanding of these architectures. We give an overview of the state-of-the-art in heterogeneous computing, focusing on three commonly found architectures: the Cell Broadband Engine Architecture, graphics processing units (GPUs), and field programmable gate arrays (FPGAs). We present a review of hardware, availablemore » software tools, and an overview of state-of-the-art techniques and algorithms. Furthermore, we present a qualitative and quantitative comparison of the architectures, and give our view on the future of heterogeneous computing.« less

Office-Based Procedures for the Diagnosis and Treatment of Laryngeal Pathology.

PubMed

Wellenstein, David J; Schutte, Henrieke W; Takes, Robert P; Honings, Jimmie; Marres, Henri A M; Burns, James A; van den Broek, Guido B

2017-09-18

Since the development of distal chip endoscopes with a working channel, diagnostic and therapeutic possibilities in the outpatient clinic in the management of laryngeal pathology have increased. Which of these office-based procedures are currently available, and their clinical indications and possible advantages, remains unclear. Review of literature on office-based procedures in laryngology and head and neck oncology. Flexible endoscopic biopsy (FEB), vocal cord injection, and laser surgery are well-established office-based procedures that can be performed under topical anesthesia. These procedures demonstrate good patient tolerability and multiple advantages. Office-based procedures under topical anesthesia are currently an established method in the management of laryngeal pathology. These procedures offer medical and economic advantages compared with operating room-performed procedures. Furthermore, office-based procedures enhance the speed and timing of the diagnostic and therapeutic process. Copyright © 2017 The Voice Foundation. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gundlach-Graham, Alexander W.; Dennis, Elise; Ray, Steven J.

An inductively coupled plasma distance-of-flight mass spectrometer (ICP-DOFMS) has been coupled with laser-ablation (LA) sample introduction for the elemental analysis of solids. ICP-DOFMS is well suited for the analysis of laser-generated aerosols because it offers both high-speed mass analysis and simultaneous multi-elemental detection. Here, we evaluate the analytical performance of the LA-ICP-DOFMS instrument, equipped with a microchannel plate-based imaging detector, for the measurement of steady-state LA signals, as well as transient signals produced from single LA events. Steady-state detection limits are 1 mg g1, and absolute single-pulse LA detection limits are 200 fg for uranium; the system is shown capablemore » of performing time-resolved single-pulse LA analysis. By leveraging the benefits of simultaneous multi-elemental detection, we also attain a good shot-to-shot reproducibility of 6% relative standard deviation (RSD) and isotope-ratio precision of 0.3% RSD with a 10 s integration time.« less

Computerized physical activity training for persons with severe mental illness - experiences from a communal supported housing project.

PubMed

Gyllensten, Amanda Lundvik; Forsberg, Karl-Anton

2017-11-01

To study the effectiveness of Exergames in communal psychiatry for persons with severe mental illness, a randomized cluster study was performed. The hypothesis was to increase physical activity habits to improve somatic health. To identify factors promoting or impeding the use of the Exergames. Assessments of BMI, blood pressure, physical fitness, SF36, GAF and social interactions were studied at baseline and 10 months. An integrated methods design using content analysis of focus group interviews was integrated with a statistical analysis. Forty-three persons were randomized to the intervention and 30 to the control group. The qualitative interviews included 18 users, 11 staffs and one technical assistant. There were no significant between-group changes in physical activity behaviours or somatic health parameters after 10 months. Only 5% of the intervention group made systematic use of the intervention. Technological difficulties and staff attitudes were found to be barriers. The Exergames were perceived as technically complicated. The staff did not see playing TV games as important and negative attitudes were found. Exergames was not a successful intervention to increase physical activity behaviours in persons with severe mental illness in the community. Exergames and motivation for physical activity in this group is problematic. Implications for rehabilitation There are difficulties to change passive physical activity habits for persons with severe mental illness, living in sheltered housing conditions in the community due to negative symptoms with depression, low motivation and bad self -confidence. An exergame intervention was not successful in this group of persons. No somatic health benefits were found. Simple physical activities and offering different choices meeting different user needs should be offered. Ensuring user and staff engagement, good technical knowledge and good monitoring is a need for a successful intervention, if Exergames are offered as an alternative physical activity.

Transplant Options When You Don't Have a 'Good Match'

MedlinePlus

... for Transplant Nurses , Second Edition. Visit Online Store Patient Education ITNS offers high quality patient education materials in multiple languages. Download Educational Booklets Symposium ...

The BASES expert statement on emotion regulation in sport.

PubMed

Lane, Andrew M; Beedie, Chris J; Jones, Marc V; Uphill, Mark; Devonport, Tracey J

2012-01-01

Emotions experienced before and during sports competition have been found to influence sports performance. Emotion regulation is defined as the automatic or deliberate use of strategies to initiate, maintain, modify or display emotions (Gross & Thompson, 2007) and is proposed to occur when a discrepancy exists between current and desired emotions. Two distinct motivations to regulate emotion - hedonic and instrumental (in short, for pleasure or for purpose) - have been proposed (Tamir, 2009). The instrumental approach might provide a more fruitful area of investigation for sports researchers as some athletes hold beliefs that supposedly pleasant emotions such as happiness and calmness associate with poor performance and supposedly unpleasant emotions such as anxiety and anger associate with good performance (Hanin, 2010). Athletes are more likely to try to regulate an emotion if they believe that doing so will facilitate performance. Strategies that encourage re-appraisal of factors that trigger emotions are proposed to be preferable. In this British Association of Sport and Exercise Sciences (BASES) expert statement, a summary of the key theoretical issues are offered leading to evidence-based recommendations for practitioners and researchers.

Performance-based regulation: enterprise responsibility for reducing death, injury, and disease caused by consumer products.

PubMed

Sugarman, Stephen D

2009-12-01

This article offers a bold new idea for confronting the staggering level of death, injury, and disease caused by five consumer products: cigarettes, alcohol, guns, junk food, and motor vehicles. Business leaders try to frame these negative outcomes as "collateral damage" that is someone else's problem. That framing not only is morally objectionable but also overlooks the possibility that, with proper prodding, industry could substantially lessen these public health disasters. I seek to reframe the public perception of who is responsible and propose to deploy a promising approach called "performance-based regulation" to combat the problem. Performance-based regulation would impose on manufacturers a legal obligation to reduce the negative social costs of their products. Rather than involving them in litigation or forcing them to operate differently (as "command-and-control" regimes do), performance-based regulation allows the firms to determine how best to decrease bad public health consequences. Like other public health strategies, performance-based regulation focuses on those who are far more likely than individual consumers to achieve real gains. Analogous to a tax on causing harm that exceeds a threshold level, performance-based regulation seeks to harness private initiative in pursuit of the public good.

Quality assurance and accreditation.

PubMed

1997-01-01

In 1996, the Joint Commission International (JCI), which is a partnership between the Joint Commission on Accreditation of Healthcare Organizations and Quality Healthcare Resources, Inc., became one of the contractors of the Quality Assurance Project (QAP). JCI recognizes the link between accreditation and quality, and uses a collaborative approach to help a country develop national quality standards that will improve patient care, satisfy patient-centered objectives, and serve the interest of all affected parties. The implementation of good standards provides support for the good performance of professionals, introduces new ideas for improvement, enhances the quality of patient care, reduces costs, increases efficiency, strengthens public confidence, improves management, and enhances the involvement of the medical staff. Such good standards are objective and measurable; achievable with current resources; adaptable to different institutions and cultures; and demonstrate autonomy, flexibility, and creativity. The QAP offers the opportunity to approach accreditation through research efforts, training programs, and regulatory processes. QAP work in the area of accreditation has been targeted for Zambia, where the goal is to provide equal access to cost-effective, quality health care; Jordan, where a consensus process for the development of standards, guidelines, and policies has been initiated; and Ecuador, where JCI has been asked to help plan an approach to the evaluation and monitoring of the health care delivery system.

Psychiatric treatment of children and adolescents in rural communities. Myths and realities.

PubMed

Cook, A D; Copans, S A; Schetky, D H

1998-07-01

Rural child and adolescent psychiatry offers many challenges, a varied and interesting practice, and the satisfaction of performing needed and important work in an environment in which one's presence is valued. The successful psychiatrist can expect to be an integrated and appreciated member of the community. The fit is not a good one for every practitioner, however. Not only are incomes lower, although the cost of living is low as well, but practitioners may find they have only exchanged urban stresses for rural pressures. The characteristics important for the child and adolescent psychiatrist are the same for rural and urban settings: flexibility, creativity and innovation, competence, self confidence, a good sense of boundaries, a good balance between personal and private life, supportive personal relationships, and a sense of humor. One must be a child advocate, have a willingness to give of one's self and one's time, and be down to earth, comfortable with oneself, and capable of self entertainment. Training programs with access to rural populations can introduce residents to rural child and adolescent psychiatry while supporting those who are already in practice. The authors hope that this article will promote a dialogue with psychiatrists considering relocation to a rural area and encourage training programs to prepare residents for rural practice.

Control of Reaction Surface in Low Temperature CVD to Enhance Nucleation and Conformal Coverage

ERIC Educational Resources Information Center

Kumar, Navneet

2009-01-01

The Holy Grail in CVD community is to find precursors that can afford the following: good nucleation on a desired substrate and conformal deposition in high AR features. Good nucleation is not only necessary for getting ultra-thin films at low thicknesses; it also offers films that are smooth at higher thickness values. On the other hand,…

Food Choices for Good Health [and] Children and Weight: What's a Parent To Do?

ERIC Educational Resources Information Center

Ikeda, Joanne P.; Mitchell, Rita

These two publications offer parents information on food choices for children and children's weight. The first publication is a guide that lists, for each of the five food groups, which foods should be eaten often, sometimes, or rarely in order to maintain good health. The food groups are: (1) milk and milk products; (2) meats, poultry, fish,…

Social work and end-of-life decisions: self-determination and the common good.

PubMed

Wesley, C A

1996-05-01

Client self-determination is the key element of NASW's policy statement about social work intervention in end-of-life decisions. However, both self-determination and the common good must be respected in social work practice and policy regarding end-of-life decisions. This article discusses self-determination in end-of-life decision making, ethical decision making and the NASW Code of Ethics, and professional ethics based on a balanced view of both self-determination and the common good. Recommendations for professional practice and social policy are offered.

Fe-Mn(Al, Si) TWIP steel - strengthening characteristics and weldability

NASA Astrophysics Data System (ADS)

Podany, P.; Koukolikova, M.; Kubina, T.; Prochazka, R.; Franc, A.

2017-02-01

Twinning Induced Plasticity steel, or TWIP steel, has had increased interest in recent years from various industry sectors. This is due to it being lightweight, strong, and ductile; which are all properties that are useful in the automotive and aerospace industries. These steels potentially can offer lighter weight vehicles and parts with increased strength and other mechanical properties. This combination could offer greater fuel efficiency and performance while at the same time improving the safety features of the vehicle. This steel is characterised by being a high alloy steel, specifically having a high manganese content. It also has a fully austenitic microstructure at room temperature, which is a unique characteristic. But, for TWIP steel to be useful in various industrial sectors, it must have good weldability. This paper deals with the description of the strengthening due to the cold rolling on experimental heats of manganese steel with TRIP/TWIP effect. Impacts on microstructure, yield strength and tensile strength are described. Also, the weldability of experimental TWIP steel by studying the properties of weld joints after laser welding is described.

Comprehension of the Electric Polarization as a Function of Low Temperature

NASA Astrophysics Data System (ADS)

Liu, Changshi

2017-01-01

Polarization response to warming plays an increasingly important role in a number of ferroelectric memory devices. This paper reports on the theoretical explanation of the relationship between polarization and temperature. According to the Fermi-Dirac distribution, the basic property of electric polarization response to temperature in magnetoelectric multiferroic materials is theoretically analyzed. The polarization in magnetoelectric multiferroic materials can be calculated by low temperature using a phenomenological theory suggested in this paper. Simulation results revealed that the numerically calculated results are in good agreement with experimental results of some inhomogeneous multiferroic materials. Numerical simulations have been performed to investigate the influences of both electric and magnetic fields on the polarization in magnetoelectric multiferroic materials. Furthermore, polarization behavior of magnetoelectric multiferroic materials can be predicted by low temperature, electric field and magnetic induction using only one function. The calculations offer an insight into the understanding of the effects of heating and magnetoelectric field on electrical properties of multiferroic materials and offer a potential to use similar methods to analyze electrical properties of other memory devices.

A Cation-containing Polymer Anion Exchange Membrane based on Poly(norbornene)

NASA Astrophysics Data System (ADS)

Beyer, Frederick; Price, Samuel; Ren, Xiaoming; Savage, Alice

Cation-containing polymers are being studied widely for use as anion exchange membranes (AEMs) in alkaline fuel cells (AFCs) because AEMs offer a number of potential benefits including allowing a solid state device and elimination of the carbonate poisoning problem. The successful AEM will combine high performance from several orthogonal properties, having robust mechanical strength even when wet, high hydroxide conductivity, and the high chemical stability required for long device lifetimes. In this study, we have synthesized a model cationic polymer that combines three of the key advantages of Nafion. The polymer backbone based on semicrystalline atactic poly(norbornene) offers good mechanical properties. A flexible, ether-based tether between the backbone and fixed cation charged species (quaternary ammonium) should provide the low-Tg, hydrophilic environment required to facilitate OH- transport. Finally, methyl groups have been added at the beta position relative to the quaternary ammonium cation to prevent Hoffman elimination, one mechanism by which AEMs are neutralized in a high pH environment. In this poster, we will present our findings on mechanical properties, morphology, charge transport, and chemical stability of this material.

Evaluation of the Aptima HBV Quant assay vs. the COBAS TaqMan HBV test using the high pure system for the quantitation of HBV DNA in plasma and serum samples.

PubMed

Schalasta, Gunnar; Börner, Anna; Speicher, Andrea; Enders, Martin

2018-03-28

Proper management of patients with chronic hepatitis B virus (HBV) infection requires monitoring of plasma or serum HBV DNA levels using a highly sensitive nucleic acid amplification test. Because commercially available assays differ in performance, we compared herein the performance of the Hologic Aptima HBV Quant assay (Aptima) to that of the Roche Cobas TaqMan HBV test for use with the high pure system (HPS/CTM). Assay performance was assessed using HBV reference panels as well as plasma and serum samples from chronically HBV-infected patients. Method correlation, analytical sensitivity, precision/reproducibility, linearity, bias and influence of genotype were evaluated. Data analysis was performed using linear regression, Deming correlation analysis and Bland-Altman analysis. Agreement between the assays for the two reference panels was good, with a difference in assay values vs. target <0.5 log. Qualitative assay results for 159 clinical samples showed good concordance (88.1%; κ=0.75; 95% confidence interval: 0.651-0.845). For the 106 samples quantitated by both assays, viral load results were highly correlated (R=0.92) and differed on average by 0.09 log, with 95.3% of the samples being within the 95% limit of agreement of the assays. Linearity for viral loads 1-7 log was excellent for both assays (R2>0.98). The two assays had similar bias and precision across the different genotypes tested at low viral loads (25-1000 IU/mL). Aptima has a performance comparable with that of HPS/CTM, making it suitable for use for HBV infection monitoring. Aptima runs on a fully automated platform (the Panther system) and therefore offers a significantly improved workflow compared with HPS/CTM.

Evaluating the double Poisson generalized linear model.

PubMed

Zou, Yaotian; Geedipally, Srinivas Reddy; Lord, Dominique

2013-10-01

The objectives of this study are to: (1) examine the applicability of the double Poisson (DP) generalized linear model (GLM) for analyzing motor vehicle crash data characterized by over- and under-dispersion and (2) compare the performance of the DP GLM with the Conway-Maxwell-Poisson (COM-Poisson) GLM in terms of goodness-of-fit and theoretical soundness. The DP distribution has seldom been investigated and applied since its first introduction two decades ago. The hurdle for applying the DP is related to its normalizing constant (or multiplicative constant) which is not available in closed form. This study proposed a new method to approximate the normalizing constant of the DP with high accuracy and reliability. The DP GLM and COM-Poisson GLM were developed using two observed over-dispersed datasets and one observed under-dispersed dataset. The modeling results indicate that the DP GLM with its normalizing constant approximated by the new method can handle crash data characterized by over- and under-dispersion. Its performance is comparable to the COM-Poisson GLM in terms of goodness-of-fit (GOF), although COM-Poisson GLM provides a slightly better fit. For the over-dispersed data, the DP GLM performs similar to the NB GLM. Considering the fact that the DP GLM can be easily estimated with inexpensive computation and that it is simpler to interpret coefficients, it offers a flexible and efficient alternative for researchers to model count data. Copyright © 2013 Elsevier Ltd. All rights reserved.

Support for Training Effectiveness Assessment and Data Interoperability (STEADI)

DTIC Science & Technology

2017-05-02

will guide future efforts of the services to broadly incorporate IPA concepts across the continuum of training . Throughout the course of this effort...data access issues for marksmanship training systems. In comparison to updating Pipeline, the registry also offered more flexibility, eased future...development would be required, SP2 offers a good starting point to accelerate development efforts and lower costs to ARL. Acting as the central glue

Dynamics as a 'Red Flag' in Exoplanetary Science

NASA Astrophysics Data System (ADS)

Horner, Jonathan; Wittenmyer, Robert

2018-01-01

The great majority of exoplanets are discovered indirectly - by observing a star doing something unusual, and inferring the presence of planets from that behaviour. The nature of those planets - their mass and their orbital parameters - is typically somewhat unclear, with a variety of different scenarios offering equally good fits to the observational data.Typically, authors publish the solution that offers the best fit to the data, without considering the degree to which the planets propsed would interact with one another. This has led to the 'discovery' of planetary systems that are clearly unfeasible - and it is likely that a number of such systems are buried in the catalogue of 'confirmed' exoplanets.Fortunately, there is a solution to this problem. By carrying out suites of n-body integrations of proposed planetary systems, we can find solutions that both offer a good fit to the observational data and the long-term dynamical stability required to give confidence that the planets proposed are truly all they seem.Here, we present the results from a number of such dynamical studies, showing the importance of such simulations to the process of exoplanet discovery and characterisation.

Symbolic Number Comparison Is Not Processed by the Analog Number System: Different Symbolic and Non-symbolic Numerical Distance and Size Effects

PubMed Central

Krajcsi, Attila; Lengyel, Gábor; Kojouharova, Petia

2018-01-01

HIGHLIGHTS We test whether symbolic number comparison is handled by an analog noisy system.Analog system model has systematic biases in describing symbolic number comparison.This suggests that symbolic and non-symbolic numbers are processed by different systems. Dominant numerical cognition models suppose that both symbolic and non-symbolic numbers are processed by the Analog Number System (ANS) working according to Weber's law. It was proposed that in a number comparison task the numerical distance and size effects reflect a ratio-based performance which is the sign of the ANS activation. However, increasing number of findings and alternative models propose that symbolic and non-symbolic numbers might be processed by different representations. Importantly, alternative explanations may offer similar predictions to the ANS prediction, therefore, former evidence usually utilizing only the goodness of fit of the ANS prediction is not sufficient to support the ANS account. To test the ANS model more rigorously, a more extensive test is offered here. Several properties of the ANS predictions for the error rates, reaction times, and diffusion model drift rates were systematically analyzed in both non-symbolic dot comparison and symbolic Indo-Arabic comparison tasks. It was consistently found that while the ANS model's prediction is relatively good for the non-symbolic dot comparison, its prediction is poorer and systematically biased for the symbolic Indo-Arabic comparison. We conclude that only non-symbolic comparison is supported by the ANS, and symbolic number comparisons are processed by other representation. PMID:29491845

Use of case-based reasoning to enhance intensive management of patients on insulin pump therapy.

PubMed

Schwartz, Frank L; Shubrook, Jay H; Marling, Cynthia R

2008-07-01

This study was conducted to develop case-based decision support software to improve glucose control in patients with type 1 diabetes mellitus (T1DM) on insulin pump therapy. While the benefits of good glucose control are well known, achieving and maintaining good glucose control remains a difficult task. Case-based decision support software may assist by recalling past problems in glucose control and their associated therapeutic adjustments. Twenty patients with T1DM on insulin pumps were enrolled in a 6-week study. Subjects performed self-glucose monitoring and provided daily logs via the Internet, tracking insulin dosages, work, sleep, exercise, meals, stress, illness, menstrual cycles, infusion set changes, pump problems, hypoglycemic episodes, and other events. Subjects wore a continuous glucose monitoring system at weeks 1, 3, and 6. Clinical data were interpreted by physicians, who explained the relationship between life events and observed glucose patterns as well as treatment rationales to knowledge engineers. Knowledge engineers built a prototypical system that contained cases of problems in glucose control together with their associated solutions. Twelve patients completed the study. Fifty cases of clinical problems and solutions were developed and stored in a case base. The prototypical system detected 12 distinct types of clinical problems. It displayed the stored problems that are most similar to the problems detected, and offered learned solutions as decision support to the physician. This software can screen large volumes of clinical data and glucose levels from patients with T1DM, identify clinical problems, and offer solutions. It has potential application in managing all forms of diabetes.

The Obligation to Participate in Biomedical Research

PubMed Central

Schaefer, G. Owen; Emanuel, Ezekiel J.; Wertheimer, Alan

2009-01-01

The prevailing view is that participation in biomedical research is above and beyond the call of duty. While some commentators have offered reasons against this, we propose a novel public goods argument for an obligation to participate in biomedical research. Biomedical knowledge is a public good, available to any individual even if that individual does not contribute to it. Participation in research is a critical way to support that important public good. Consequently, we all have a duty to participate. The current social norm is that people participate only if they have a good reason to do so. The public goods argument implies that people should participate unless they have a good reason not to. Such a shift would be of great aid to the progress of biomedical research, eventually making our society significantly healthier and longer-lived. PMID:19567441

Aerospace engineering model identifies risks.

PubMed

2001-06-01

Issuing a new set of safety standards with which health care institutions must comply is all well and good, but offering those institution's creative tools to aid that compliance is even more significant.

Localization Algorithm with On-line Path Loss Estimation and Node Selection

PubMed Central

Bel, Albert; Vicario, José López; Seco-Granados, Gonzalo

2011-01-01

RSS-based localization is considered a low-complexity algorithm with respect to other range techniques such as TOA or AOA. The accuracy of RSS methods depends on the suitability of the propagation models used for the actual propagation conditions. In indoor environments, in particular, it is very difficult to obtain a good propagation model. For that reason, we present a cooperative localization algorithm that dynamically estimates the path loss exponent by using RSS measurements. Since the energy consumption is a key point in sensor networks, we propose a node selection mechanism to limit the number of neighbours of a given node that are used for positioning purposes. Moreover, the selection mechanism is also useful to discard bad links that could negatively affect the performance accuracy. As a result, we derive a practical solution tailored to the strict requirements of sensor networks in terms of complexity, size and cost. We present results based on both computer simulations and real experiments with the Crossbow MICA2 motes showing that the proposed scheme offers a good trade-off in terms of position accuracy and energy efficiency. PMID:22163992

Polyacrylonitrile nanofiber as polar solvent N,N-dimethyl formamide sensor based on quartz crystal microbalance technique

NASA Astrophysics Data System (ADS)

Rianjanu, A.; Julian, T.; Hidayat, S. N.; Suyono, E. A.; Kusumaatmaja, A.; Triyana, K.

2018-04-01

Here, we describe an N,N-dimethyl formamide (DMF) vapour sensor fabricated by coating polyacrylonitrile (PAN) nanofiber structured on quartz crystal microbalance (QCM). The PAN nanofiber sensors with an average diameter of 225 nm to 310 nm were fabricated via electrospinning process with different mass deposition on QCM substrate. The nanostructured of PAN nanofiber offers a high specific surface area that improved the sensing performance of nanofiber sensors. Benefiting from that fine structure, and high polymer-solvent affinity between PAN and DMF, the development of DMF sensors presented good response at ambient temperature. Since there is no chemical reaction between PAN nanofiber and DMF vapour, weak physical interaction such absorption and swelling were responsible for the sensing behavior. The results are indicating that the response of PAN nanofiber sensors has more dependency on the nanofiber structure (specific surface area) rather than its mass deposition. The sensor also showed good stability after a few days sensing. These findings have significant implications for developing DMF vapour sensor based on QCM coated polymer nanofibers.

Improved Electroformed Structural Copper and Copper Alloys

NASA Technical Reports Server (NTRS)

Malone, G. A.; Hudson, W.; Babcock, B.; Edwards, R.

1998-01-01

Electroforming offers a superior means for fabricating internally cooled heat exchangers and structures subjected to thermal environments. Copper is deposited from many such applications because of the good thermal conductivity. It suffers from mediocre yield strength as a structural material and loses mechanical strength at intermediate temperatures. Mechanical properties similar to those of electroformed nickel are desired. Phase 1 examined innovative means to improve deposited copper structural performance. Yield strengths as high as 483 MPa (70 ksi) were obtained with useful ductility while retaining a high level of purity essential to good thermal conductivity. Phase 2 represents a program to explore new additive combinations in copper electrolytes to produce a more fine, equiaxed grain which can be thermally stabilized by other techniques such as alloying in modest degrees and dispersion strengthening. Evaluation of new technology - such as the codeposition of fullerness (diamond-like) particles were made to enhance thermal conductivity in low alloys. A test fire quality tube-bundle engine was fabricated using these copper property improvement concepts to show the superiority of the new coppers and fabrications methods over competitive technologies such as brazing and plasma deposition.

π-Extended triptycene-based material for capillary gas chromatographic separations.

PubMed

Yang, Yinhui; Wang, Qinsi; Qi, Meiling; Huang, Xuebin

2017-10-02

Triptycene-based materials feature favorable physicochemical properties and unique molecular recognition ability that offer good potential as stationary phases for capillary gas chromatography (GC). Herein, we report the investigation of utilizing a π-extended triptycene material (denoted as TQPP) for GC separations. As a result, the TQPP capillary column exhibited high column efficiency of 4030 plates m -1 and high-resolution performance for a wide range of analytes, especially structural and positional isomers. Interestingly, the TQPP stationary phase showed unique shape selectivity for alkanes isomers and preferential retention for analytes with halogen atoms and H-bonding nature mainly through their halogen-bonding and H-bonding interactions. In addition, the TQPP column had good repeatability and reproducibility with the RSD values of 0.02-0.34% for run-to-run, 0.09-0.80% for day-to-day and 1.4-5.2% for column-to-column, respectively, and favorable thermal stability up to 280 °C. This work demonstrates the promising future of triptycene-based materials as a new class of stationary phases for GC separations. Copyright © 2017 Elsevier B.V. All rights reserved.

Gallium arsenide quantum well-based far infrared array radiometric imager

NASA Technical Reports Server (NTRS)

Forrest, Kathrine A.; Jhabvala, Murzy D.

1991-01-01

We have built an array-based camera (FIRARI) for thermal imaging (lambda = 8 to 12 microns). FIRARI uses a square format 128 by 128 element array of aluminum gallium arsenide quantum well detectors that are indium bump bonded to a high capacity silicon multiplexer. The quantum well detectors offer good responsivity along with high response and noise uniformity, resulting in excellent thermal images without compensation for variation in pixel response. A noise equivalent temperature difference of 0.02 K at a scene temperature of 290 K was achieved with the array operating at 60 K. FIRARI demonstrated that AlGaAS quantum well detector technology can provide large format arrays with performance superior to mercury cadmium telluride at far less cost.

State-of-the-art pancreatic MRI.

PubMed

Sandrasegaran, Kumaresan; Lin, Chen; Akisik, Fatih M; Tann, Mark

2010-07-01

The purpose of this article is to discuss the most current techniques used for pancreatic imaging, highlighting the advantages and disadvantages of state-of-the-art and emerging pulse sequences and their application to pancreatic disease. Given the technologic advances of the past decade, pancreatic MRI protocols have evolved. Most sequences can now be performed in one or a few breath-holds; 3D sequences with thin, contiguous slices offer improved spatial resolution; and better fat and motion suppression allow improved contrast resolution and image quality. The diagnostic potential of MRCP is now almost as good as ERCP, with pancreatic MRI as the main imaging technique to investigate biliopancreatic pain, chronic pancreatitis, and cystic pancreatic tumors at many institutions. In addition, functional information is provided with secretin-enhanced MRCP.

[Teaching evaluation at Medical School, UNAM].

PubMed

Salas-Gómez, Luz Elena; Ortiz-Montalvo, Armando; Alaminos-Sager, Isabel Luisa

2006-01-01

The purpose of this article is to offer a synthesis of what has been done in the Teaching Evaluation Program at the Medical School of the Autonomous National University of Mexico (UNAM). The Program involves three questionnaires of the students' opinion that evaluate professors of the basic and sociomedical areas, microbiology and parasitology laboratory and surgery. Between 1994 and 2003, 134,811 questionnaires were answered to evaluate the teaching performance of 6262 professors of pregraduate students. Although the evaluation of teaching through a single way is insufficient, the results obtained allow us to affirm that the Medical School at UNAM has a good professor staff, as well as they are useful for the design of programs dedicated to the acknowledgment of excellence and the needs for teaching education.

Infrared thermographic evaluation of marine composite structures

NASA Astrophysics Data System (ADS)

Jones, Thomas S.

1995-06-01

Glass fiber composite materials have been used for many years in the construction of pleasure, cruising, and racing marine vessels. These vessels have demonstrated excellent performance characteristics and have been reliable in service. Even so, as with all material systems, they are subject to damage from accident, neglect, and abuse. Traditional nondestructive inspection approaches are not always fully effective for examining composite marine structures. Infrared imaging offers a particularly attractive approach for the inspection of composite material structures. Glass fiber composites frequently possess a combination of thermal properties that make them good candidates for infrared thermographic evaluation while other nondestructive evaluation approaches provide limited success. Infrared thermography combines the advantages of being nondestructive with the capability of rapidly inspecting wide surface areas.

Advances in shutter drive technology to enhance man-portable infrared cameras

NASA Astrophysics Data System (ADS)

Durfee, David

2012-06-01

With an emphasis on highest reliability, infrared (IR) imagers have traditionally used simplest-possible shutters and field-proven technology. Most commonly, single-step rotary or linear magnetic actuators have been used with good success. However, several newer shutter drive technologies offer benefits in size and power reduction, enabling man-portable imagers that are more compact, lighter, and more durable. This paper will discuss improvements in shutter and shutter drive technology, which enable smaller and more power-efficient imagers. Topics will transition from single-step magnetic actuators to multi-stepping magnetic drives, latching vs. balanced systems for blade position shock-resistance, motor and geared motor drives, and associated stepper driver electronics. It will highlight performance tradeoffs pertinent to man-portable military systems.

Defense AT and L Magazine. Vol. 46, no. 5, September-October 2017

DTIC Science & Technology

2017-09-01

service , and current DoD employees. College Students: Industry is offering internships as early as the sophomore year. DoD branding needs to...engineering neglect of known good practice that can result in persistent public, user, customer , staff, reputation or financial cost. In truth...DoD’s Acquisition Defense AT&L: September-October 2017 20 Workforce professionals and leaders unmistakably need to obtain more goods and services

Affirmative Action Hanging in the Balance: Giving Voice to the Research Community in the Supreme Court

ERIC Educational Resources Information Center

Orfield, Gary

2013-01-01

Good research does not mean good policy, but policy or legal conclusions that rely on false assumptions are certain to be bad. When the rights of U.S. students of color are at stake, the Supreme Courts need the best research findings the country can offer. The U.S. Constitution contains sweeping and undefined terms. Reaching a conclusion about the…

Highly light-weighted ZERODUR mirror and fixation for cryogenic applications

NASA Astrophysics Data System (ADS)

Behar-Lafenetre, Stephanie; Lasic, Thierry; Viale, Roger; Ruch, Eric

2017-11-01

Space telescopes require large primary mirrors within a demanding thermal environment: observatories at L2 orbit provide a stable environment with a drawback of very low temperature. Besides, it is necessary to limit as far as possible the mirrors mass while withstanding launch loads and keeping image quality within a cryogenic environment. ZERODUR is a well-known material extensively used for large telescope. Alcatel Alenia Space and Sagem/REOSC have combined their respective skills to go further in the lightweighting ratio of large mirror (36 kg/m2 on 1.5 m2) through a detailed design, performance assessment and technology demonstration with breadboards. Beyond on a large mirror detailed design supported by analysis, a ZERODUR mock-up has been manufacturing by Sagem/REOSC to demonstrate the achievability of the demanding parameters offering this high lightweighting ratio. Through the ISO experience on mirror attachments, a detailed design of the mirror fixation has been done as well. A full size mock-up has been manufactured and successfully tested under thermal cycling and static loading. Eventually, the ZERODUR stability behavior within this large temperature range has been verified through thermal cycling and image quality cryotest on a flat mirror breadboard. These developments demonstrate that ZERODUR is a good candidate for large space cryogenic mirrors offering outstanding optical performances associated to matured and proven technology and manufacturing process.

Performance enhancement of Pt/TiO2/Si UV-photodetector by optimizing light trapping capability and interdigitated electrodes geometry

NASA Astrophysics Data System (ADS)

Bencherif, H.; Djeffal, F.; Ferhati, H.

2016-09-01

This paper presents a hybrid approach based on an analytical and metaheuristic investigation to study the impact of the interdigitated electrodes engineering on both speed and optical performance of an Interdigitated Metal-Semiconductor-Metal Ultraviolet Photodetector (IMSM-UV-PD). In this context, analytical models regarding the speed and optical performance have been developed and validated by experimental results, where a good agreement has been recorded. Moreover, the developed analytical models have been used as objective functions to determine the optimized design parameters, including the interdigit configuration effect, via a Multi-Objective Genetic Algorithm (MOGA). The ultimate goal of the proposed hybrid approach is to identify the optimal design parameters associated with the maximum of electrical and optical device performance. The optimized IMSM-PD not only reveals superior performance in terms of photocurrent and response time, but also illustrates higher optical reliability against the optical losses due to the active area shadowing effects. The advantages offered by the proposed design methodology suggest the possibility to overcome the most challenging problem with the communication speed and power requirements of the UV optical interconnect: high derived current and commutation speed in the UV receiver.

The Hotel Industrys Role In Combatting Sex Trafficking

DTIC Science & Technology

2017-12-01

expectations that society has of organizations at a given point in time.”10 Carroll posits that businesses must first, “produce goods and services that...reuse programs that offer guests the option to forego daily laundering services are now commonly used throughout the lodging industry to conserve...million in funding—which represents an increase of $5.9 million over FY2015—to 33 victim service providers.47 Government funding offers agencies and NGOs

Necessary Ingredients for Good Team Teaching

ERIC Educational Resources Information Center

Colman, Clyde H.; Budahl, Leon

1973-01-01

Team teaching should not be adopted wholesale without first being tested for its real advantages. After listing disadvantages and possible pitfalls, the authors offer procedural suggestions that can lead to teaching ecstasy.'' (Editor)

A new dynamic tactile display for reconfigurable braille: implementation and tests.

PubMed

Motto Ros, Paolo; Dante, Vittorio; Mesin, Luca; Petetti, Erminio; Del Giudice, Paolo; Pasero, Eros

2014-01-01

Different tactile interfaces have been proposed to represent either text (braille) or, in a few cases, tactile large-area screens as replacements for visual displays. None of the implementations so far can be customized to match users' preferences, perceptual differences and skills. Optimal choices in these respects are still debated; we approach a solution by designing a flexible device allowing the user to choose key parameters of tactile transduction. We present here a new dynamic tactile display, a 8 × 8 matrix of plastic pins based on well-established and reliable piezoelectric technology to offer high resolution (pin gap 0.7mm) as well as tunable strength of the pins displacement, and refresh rate up to 50s(-1). It can reproduce arbitrary patterns, allowing it to serve the dual purpose of providing, depending on contingent user needs, tactile rendering of non-character information, and reconfigurable braille rendering. Given the relevance of the latter functionality for the expected average user, we considered testing braille encoding by volunteers a benchmark of primary importance. Tests were performed to assess the acceptance and usability with minimal training, and to check whether the offered flexibility was indeed perceived by the subject as an added value compared to conventional braille devices. Different mappings between braille dots and actual tactile pins were implemented to match user needs. Performances of eight experienced braille readers were defined as the fraction of correct identifications of rendered content. Different information contents were tested (median performance on random strings, words, sentences identification was about 75%, 85%, 98%, respectively, with a significant increase, p < 0.01), obtaining statistically significant improvements in performance during the tests (p < 0.05). Experimental results, together with qualitative ratings provided by the subjects, show a good acceptance and the effectiveness of the proposed solution.

A new dynamic tactile display for reconfigurable braille: implementation and tests

PubMed Central

Motto Ros, Paolo; Dante, Vittorio; Mesin, Luca; Petetti, Erminio; Del Giudice, Paolo; Pasero, Eros

2014-01-01

Different tactile interfaces have been proposed to represent either text (braille) or, in a few cases, tactile large-area screens as replacements for visual displays. None of the implementations so far can be customized to match users' preferences, perceptual differences and skills. Optimal choices in these respects are still debated; we approach a solution by designing a flexible device allowing the user to choose key parameters of tactile transduction. We present here a new dynamic tactile display, a 8 × 8 matrix of plastic pins based on well-established and reliable piezoelectric technology to offer high resolution (pin gap 0.7mm) as well as tunable strength of the pins displacement, and refresh rate up to 50s−1. It can reproduce arbitrary patterns, allowing it to serve the dual purpose of providing, depending on contingent user needs, tactile rendering of non-character information, and reconfigurable braille rendering. Given the relevance of the latter functionality for the expected average user, we considered testing braille encoding by volunteers a benchmark of primary importance. Tests were performed to assess the acceptance and usability with minimal training, and to check whether the offered flexibility was indeed perceived by the subject as an added value compared to conventional braille devices. Different mappings between braille dots and actual tactile pins were implemented to match user needs. Performances of eight experienced braille readers were defined as the fraction of correct identifications of rendered content. Different information contents were tested (median performance on random strings, words, sentences identification was about 75%, 85%, 98%, respectively, with a significant increase, p < 0.01), obtaining statistically significant improvements in performance during the tests (p < 0.05). Experimental results, together with qualitative ratings provided by the subjects, show a good acceptance and the effectiveness of the proposed solution. PMID:24782756

Model Performance Evaluation and Scenario Analysis ...

EPA Pesticide Factsheets

This tool consists of two parts: model performance evaluation and scenario analysis (MPESA). The model performance evaluation consists of two components: model performance evaluation metrics and model diagnostics. These metrics provides modelers with statistical goodness-of-fit measures that capture magnitude only, sequence only, and combined magnitude and sequence errors. The performance measures include error analysis, coefficient of determination, Nash-Sutcliffe efficiency, and a new weighted rank method. These performance metrics only provide useful information about the overall model performance. Note that MPESA is based on the separation of observed and simulated time series into magnitude and sequence components. The separation of time series into magnitude and sequence components and the reconstruction back to time series provides diagnostic insights to modelers. For example, traditional approaches lack the capability to identify if the source of uncertainty in the simulated data is due to the quality of the input data or the way the analyst adjusted the model parameters. This report presents a suite of model diagnostics that identify if mismatches between observed and simulated data result from magnitude or sequence related errors. MPESA offers graphical and statistical options that allow HSPF users to compare observed and simulated time series and identify the parameter values to adjust or the input data to modify. The scenario analysis part of the too

NGSI technologies Coming Down the Road - Fast Neutron Collar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swinhoe, Martyn T.

2014-02-26

This report describes the safeguard significance of NGS technologies, those things that offer new neutron collar design with 3He detectors to give good precision results in much shorter measurement time.

Training on a Shoestring.

ERIC Educational Resources Information Center

Callahan, Madelyn R.

1995-01-01

Describes ways to train employees on a tight budget and cut training costs. Offers ideas such as using local colleges, negotiating outsourcing costs, using computers, making good use of experts, and sharing resources with other companies. (JOW)

45 CFR 233.100 - Dependent children of unemployed parents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... reason of conduct or circumstances which result or would result in disqualification for unemployment... manpower agencies, the determination as to whether the offer was bona fide, or whether there was good cause...

45 CFR 233.100 - Dependent children of unemployed parents.

Code of Federal Regulations, 2014 CFR

2014-10-01

... reason of conduct or circumstances which result or would result in disqualification for unemployment... manpower agencies, the determination as to whether the offer was bona fide, or whether there was good cause...

45 CFR 233.100 - Dependent children of unemployed parents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... reason of conduct or circumstances which result or would result in disqualification for unemployment... manpower agencies, the determination as to whether the offer was bona fide, or whether there was good cause...

45 CFR 233.100 - Dependent children of unemployed parents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... reason of conduct or circumstances which result or would result in disqualification for unemployment... manpower agencies, the determination as to whether the offer was bona fide, or whether there was good cause...

45 CFR 233.100 - Dependent children of unemployed parents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... reason of conduct or circumstances which result or would result in disqualification for unemployment... manpower agencies, the determination as to whether the offer was bona fide, or whether there was good cause...

Bipolar and Monopolar Lithium-Ion Battery Technology at Yardney

NASA Technical Reports Server (NTRS)

Russell, P.; Flynn, J.; Reddy, T.

1996-01-01

Lithium-ion battery systems offer several advantages: intrinsically safe; long cycle life; environmentally friendly; high energy density; wide operating temperature range; good discharge rate capability; low self-discharge; and no memory effect.

Image Quality of Cardiac Magnetic Resonance Imaging in Patients With an Implantable Cardioverter Defibrillator System Designed for the Magnetic Resonance Imaging Environment.

PubMed

Schwitter, Juerg; Gold, Michael R; Al Fagih, Ahmed; Lee, Sung; Peterson, Michael; Ciuffo, Allen; Zhang, Yan; Kristiansen, Nina; Kanal, Emanuel; Sommer, Torsten

2016-05-01

Recently, magnetic resonance (MR)-conditional implantable cardioverter defibrillator (ICD) systems have become available. However, associated cardiac MR image (MRI) quality is unknown. The goal was to evaluate the image quality performance of various cardiac MR sequences in a multicenter trial of patients implanted with an MR-conditional ICD system. The Evera-MRI trial enrolled 275 patients in 42 centers worldwide. There were 263 patients implanted with an Evera-MRI single- or dual-chamber ICD and randomized to controls (n=88) and MRI (n=175), 156 of whom underwent a protocol-required MRI (9-12 weeks post implant). Steady-state-free-precession (SSFP) and fast-gradient-echo (FGE) sequences were acquired in short-axis and horizontal long-axis orientations. Qualitative and quantitative assessment of image quality was performed by using a 7-point scale (grades 1-3: good quality, grades 6-7: nondiagnostic) and measuring ICD- and lead-related artifact size. Good to moderate image quality (grades 1-5) was obtained in 53% and 74% of SSFP and FGE acquisitions, respectively, covering the left ventricle, and in 69% and 84%, respectively, covering the right ventricle. Odds for better image quality were greater for right ventricle versus left ventricle (odds ratio, 1.8; 95% confidence interval, 1.5-2.2; P<0.0001) and greater for FGE versus SSFP (odds ratio, 3.5; 95% confidence interval, 2.5-4.8; P<0.0001). Compared with SSFP, ICD-related artifacts on FGE were smaller (141±65 versus 75±57 mm, respectively; P<0.0001). Lead artifacts were much smaller than ICD artifacts (P<0.0001). FGE yields good to moderate quality in 74% of left ventricle and 84% of right ventricle acquisitions and performs better than SSFP in patients with an MRI-conditional ICD system. In these patients, cardiac MRI can offer diagnostic information in most cases. URL: http://www.clinicaltrials.gov. Unique identifier: NCT02117414. © 2016 American Heart Association, Inc.

Viscoelastic processing and characterization of high-performance polymeric composite systems

NASA Astrophysics Data System (ADS)

Buehler, Frederic Ulysse

2000-10-01

Fiber reinforced composites, a combination of reinforcing fiber and resin matrix, offer many advantages over traditional materials, and have therefore found wide application in the aerospace and sporting goods industry. Among the advantages that composite materials offer, the most often cited are weight saving, high modulus, high strength-to-weight ratio, corrosion resistance, and fatigue resistance. As much as their attributes are desirable, composites are difficult to process due to their heterogeneous, anisotropic, and viscoelastic nature. It is therefore not surprising that the interrelationship between structure, property, and process is not fully understood. Consequently, the major purpose of this research work was to investigate this interrelationship, and ways to scale it to utilization. First, four prepreg materials, which performed differently in the manufacturing of composite parts, but were supposedly identical, were characterized. The property variations that were found among these prepregs in terms of tack and frictional resistance assessed the need for improved understanding of the prepregging process. Therefore, the influence of the processing parameters on final prepreg quality were investigated, and led to the definition of more adequate process descriptors. Additionally, one of the characterization techniques used in this work, temperature modulated differential scanning calorimetry, was examined in depth with the development of a mathematical model. This model, which enabled the exploration of the relationship between user parameters, sample thermophysical properties, and final results, was then compared to literature data. Collectively, this work explored and identified the key connectors between process, structure, and property as they relate to the manufacturing, design, and performance of composite materials.

Determining team cognition from delay analysis using cross recurrence plot.

PubMed

Hajari, Nasim; Cheng, Irene; Bin Zheng; Basu, Anup

2016-08-01

Team cognition is an important factor in evaluating and determining team performance. Forming a team with good shared cognition is even more crucial for laparoscopic surgery applications. In this study, we analyzed the eye tracking data of two surgeons during a laparoscopic simulation operation, then performed Cross Recurrence Analysis (CRA) on the recorded data to study the delay behaviour for good performer and poor performer teams. Dual eye tracking data for twenty two dyad teams were recorded during a laparoscopic task and then the teams were divided into good performer and poor performer teams based on the task times. Eventually we studied the delay between two team members for good and poor performer teams. The results indicated that the good performer teams show a smaller delay comparing to poor performer teams. This study is compatible with gaze overlap analysis between team members and therefore it is a good evidence of shared cognition between team members.

Open Microphone Speech Understanding: Correct Discrimination Of In Domain Speech

NASA Technical Reports Server (NTRS)

Hieronymus, James; Aist, Greg; Dowding, John

2006-01-01

An ideal spoken dialogue system listens continually and determines which utterances were spoken to it, understands them and responds appropriately while ignoring the rest This paper outlines a simple method for achieving this goal which involves trading a slightly higher false rejection rate of in domain utterances for a higher correct rejection rate of Out of Domain (OOD) utterances. The system recognizes semantic entities specified by a unification grammar which is specialized by Explanation Based Learning (EBL). so that it only uses rules which are seen in the training data. The resulting grammar has probabilities assigned to each construct so that overgeneralizations are not a problem. The resulting system only recognizes utterances which reduce to a valid logical form which has meaning for the system and rejects the rest. A class N-gram grammar has been trained on the same training data. This system gives good recognition performance and offers good Out of Domain discrimination when combined with the semantic analysis. The resulting systems were tested on a Space Station Robot Dialogue Speech Database and a subset of the OGI conversational speech database. Both systems run in real time on a PC laptop and the present performance allows continuous listening with an acceptably low false acceptance rate. This type of open microphone system has been used in the Clarissa procedure reading and navigation spoken dialogue system which is being tested on the International Space Station.

Integrating genome-wide association study summaries and element-gene interaction datasets identified multiple associations between elements and complex diseases.

PubMed

He, Awen; Wang, Wenyu; Prakash, N Tejo; Tinkov, Alexey A; Skalny, Anatoly V; Wen, Yan; Hao, Jingcan; Guo, Xiong; Zhang, Feng

2018-03-01

Chemical elements are closely related to human health. Extensive genomic profile data of complex diseases offer us a good opportunity to systemically investigate the relationships between elements and complex diseases/traits. In this study, we applied gene set enrichment analysis (GSEA) approach to detect the associations between elements and complex diseases/traits though integrating element-gene interaction datasets and genome-wide association study (GWAS) data of complex diseases/traits. To illustrate the performance of GSEA, the element-gene interaction datasets of 24 elements were extracted from the comparative toxicogenomics database (CTD). GWAS summary datasets of 24 complex diseases or traits were downloaded from the dbGaP or GEFOS websites. We observed significant associations between 7 elements and 13 complex diseases or traits (all false discovery rate (FDR) < 0.05), including reported relationships such as aluminum vs. Alzheimer's disease (FDR = 0.042), calcium vs. bone mineral density (FDR = 0.031), magnesium vs. systemic lupus erythematosus (FDR = 0.012) as well as novel associations, such as nickel vs. hypertriglyceridemia (FDR = 0.002) and bipolar disorder (FDR = 0.027). Our study results are consistent with previous biological studies, supporting the good performance of GSEA. Our analyzing results based on GSEA framework provide novel clues for discovering causal relationships between elements and complex diseases. © 2017 WILEY PERIODICALS, INC.

Highly Sensitive Temperature Sensors Based on Fiber-Optic PWM and Capacitance Variation Using Thermochromic Sensing Membrane.

PubMed

Khan, Md Rajibur Rahaman; Kang, Shin-Won

2016-07-09

In this paper, we propose a temperature/thermal sensor that contains a Rhodamine-B sensing membrane. We applied two different sensing methods, namely, fiber-optic pulse width modulation (PWM) and an interdigitated capacitor (IDC)-based temperature sensor to measure the temperature from 5 °C to 100 °C. To the best of our knowledge, the fiber-optic PWM-based temperature sensor is reported for the first time in this study. The proposed fiber-optic PWM temperature sensor has good sensing ability; its sensitivity is ~3.733 mV/°C. The designed temperature-sensing system offers stable sensing responses over a wide dynamic range, good reproducibility properties with a relative standard deviation (RSD) of ~0.021, and the capacity for a linear sensing response with a correlation coefficient of R² ≈ 0.992 over a wide sensing range. In our study, we also developed an IDC temperature sensor that is based on the capacitance variation principle as the IDC sensing element is heated. We compared the performance of the proposed temperature-sensing systems with different fiber-optic temperature sensors (which are based on the fiber-optic wavelength shift method, the long grating fiber-optic Sagnac loop, and probe type fiber-optics) in terms of sensitivity, dynamic range, and linearity. We observed that the proposed sensing systems have better sensing performance than the above-mentioned sensing system.

Nutrition education training of health workers and other field staff to support chronically deprived communities.

PubMed

Calderon, T A

2001-12-01

This paper focuses on the provision of adequate training in nutrition education to health and other community development workers for their improved performance and achievement. The difficulties encountered and special care needed when dealing with low-income, chronically deprived communities are raised. A brief analysis of past and present trends in nutrition education is presented to show the progress made from restricted, authoritative and not very successful proposals to more comprehensive and participatory approaches. The need to train and update regional and field-level personnel on the new approaches, theories and models offered by nutrition education is highlighted, but the scant availability of resources for training activities may be a great limitation for this undertaking. The contribution of educational, social, psychological and communication sciences, as well as marketing, in improving and broadening the performance of health and nutrition education is recognised. Some successful nutrition education projects, implemented in different regions, using various approaches, have managed to improve the nutrition situation of low-income groups and could be used as good examples to be followed. Recommendations for implementing nutrition education projects or activities need to consider some prerequisites, such as good knowledge and analysis of the nutrition situation, careful selection of the strategies and methods, careful planning and implementation, and clear definition of the procedures and instruments for follow-up and evaluation.

Memristive effects in oxygenated amorphous carbon nanodevices

NASA Astrophysics Data System (ADS)

Bachmann, T. A.; Koelmans, W. W.; Jonnalagadda, V. P.; Le Gallo, M.; Santini, C. A.; Sebastian, A.; Eleftheriou, E.; Craciun, M. F.; Wright, C. D.

2018-01-01

Computing with resistive-switching (memristive) memory devices has shown much recent progress and offers an attractive route to circumvent the von-Neumann bottleneck, i.e. the separation of processing and memory, which limits the performance of conventional computer architectures. Due to their good scalability and nanosecond switching speeds, carbon-based resistive-switching memory devices could play an important role in this respect. However, devices based on elemental carbon, such as tetrahedral amorphous carbon or ta-C, typically suffer from a low cycling endurance. A material that has proven to be capable of combining the advantages of elemental carbon-based memories with simple fabrication methods and good endurance performance for binary memory applications is oxygenated amorphous carbon, or a-CO x . Here, we examine the memristive capabilities of nanoscale a-CO x devices, in particular their ability to provide the multilevel and accumulation properties that underpin computing type applications. We show the successful operation of nanoscale a-CO x memory cells for both the storage of multilevel states (here 3-level) and for the provision of an arithmetic accumulator. We implement a base-16, or hexadecimal, accumulator and show how such a device can carry out hexadecimal arithmetic and simultaneously store the computed result in the self-same a-CO x cell, all using fast (sub-10 ns) and low-energy (sub-pJ) input pulses.

Paper-like electronic displays: Large-area rubber-stamped plastic sheets of electronics and microencapsulated electrophoretic inks

PubMed Central

Rogers, John A.; Bao, Zhenan; Baldwin, Kirk; Dodabalapur, Ananth; Crone, Brian; Raju, V. R.; Kuck, Valerie; Katz, Howard; Amundson, Karl; Ewing, Jay; Drzaic, Paul

2001-01-01

Electronic systems that use rugged lightweight plastics potentially offer attractive characteristics (low-cost processing, mechanical flexibility, large area coverage, etc.) that are not easily achieved with established silicon technologies. This paper summarizes work that demonstrates many of these characteristics in a realistic system: organic active matrix backplane circuits (256 transistors) for large (≈5 × 5-inch) mechanically flexible sheets of electronic paper, an emerging type of display. The success of this effort relies on new or improved processing techniques and materials for plastic electronics, including methods for (i) rubber stamping (microcontact printing) high-resolution (≈1 μm) circuits with low levels of defects and good registration over large areas, (ii) achieving low leakage with thin dielectrics deposited onto surfaces with relief, (iii) constructing high-performance organic transistors with bottom contact geometries, (iv) encapsulating these transistors, (v) depositing, in a repeatable way, organic semiconductors with uniform electrical characteristics over large areas, and (vi) low-temperature (≈100°C) annealing to increase the on/off ratios of the transistors and to improve the uniformity of their characteristics. The sophistication and flexibility of the patterning procedures, high level of integration on plastic substrates, large area coverage, and good performance of the transistors are all important features of this work. We successfully integrate these circuits with microencapsulated electrophoretic “inks” to form sheets of electronic paper. PMID:11320233

Multicentric comparative assessment of the bio-evolution Toxoplasma gondii detection kit with eight laboratory-developed PCR assays for molecular diagnosis of congenital toxoplasmosis.

PubMed

Filisetti, Denis; Sterkers, Yvon; Brenier-Pinchart, Marie-Pierre; Cassaing, Sophie; Dalle, Frédéric; Delhaes, Laurence; Pelloux, Hervé; Touafek, Fériel; Varlet-Marie, Emmanuelle; Yera, Hélène; Candolfi, Ermano; Bastien, Patrick

2015-01-01

The detection of Toxoplasma gondii in amniotic fluid is an essential tool for the prenatal diagnosis of congenital toxoplasmosis and is currently essentially based on the use of PCR. Although some consensus is emerging, this molecular diagnosis suffers from a lack of standardization and an extreme diversity of laboratory-developed methods. Commercial kits for the detection of T. gondii by PCR were recently developed and offer certain advantages; however, they must be assessed in comparison with optimized reference PCR assays. The present multicentric study aimed to compare the performances of the Bio-Evolution T. gondii detection kit and laboratory-developed PCR assays set up in eight proficient centers in France. The study compared 157 amniotic fluid samples and found concordances of 99% and 100% using 76 T. gondii-infected samples and 81 uninfected samples, respectively. Moreover, taking into account the classification of the European Research Network on Congenital Toxoplasmosis, the overall diagnostic sensitivity of all assays was identical and calculated to be 86% (54/63); specificity was 100% for all assays. Finally, the relative quantification results were in good agreement between the kit and the laboratory-developed assays. The good performances of this commercial kit are probably in part linked to the use of a number of good practices: detection in multiplicate, amplification of the repetitive DNA target rep529, and the use of an internal control for the detection of PCR inhibitors. The only drawbacks noted at the time of the study were the absence of uracil-N-glycosylase and small defects in the reliability of the production of different reagents. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

Multicentric Comparative Assessment of the Bio-Evolution Toxoplasma gondii Detection Kit with Eight Laboratory-Developed PCR Assays for Molecular Diagnosis of Congenital Toxoplasmosis

PubMed Central

Filisetti, Denis; Sterkers, Yvon; Brenier-Pinchart, Marie-Pierre; Cassaing, Sophie; Dalle, Frédéric; Delhaes, Laurence; Pelloux, Hervé; Touafek, Fériel; Varlet-Marie, Emmanuelle; Yera, Hélène; Candolfi, Ermano

2014-01-01

The detection of Toxoplasma gondii in amniotic fluid is an essential tool for the prenatal diagnosis of congenital toxoplasmosis and is currently essentially based on the use of PCR. Although some consensus is emerging, this molecular diagnosis suffers from a lack of standardization and an extreme diversity of laboratory-developed methods. Commercial kits for the detection of T. gondii by PCR were recently developed and offer certain advantages; however, they must be assessed in comparison with optimized reference PCR assays. The present multicentric study aimed to compare the performances of the Bio-Evolution T. gondii detection kit and laboratory-developed PCR assays set up in eight proficient centers in France. The study compared 157 amniotic fluid samples and found concordances of 99% and 100% using 76 T. gondii-infected samples and 81 uninfected samples, respectively. Moreover, taking into account the classification of the European Research Network on Congenital Toxoplasmosis, the overall diagnostic sensitivity of all assays was identical and calculated to be 86% (54/63); specificity was 100% for all assays. Finally, the relative quantification results were in good agreement between the kit and the laboratory-developed assays. The good performances of this commercial kit are probably in part linked to the use of a number of good practices: detection in multiplicate, amplification of the repetitive DNA target rep529, and the use of an internal control for the detection of PCR inhibitors. The only drawbacks noted at the time of the study were the absence of uracil-N-glycosylase and small defects in the reliability of the production of different reagents. PMID:25339393

Agility in Team Sports: Testing, Training and Factors Affecting Performance.

PubMed

Paul, Darren J; Gabbett, Tim J; Nassis, George P

2016-03-01

Agility is an important characteristic of team sports athletes. There is a growing interest in the factors that influence agility performance as well as appropriate testing protocols and training strategies to assess and improve this quality. The objective of this systematic review was to (1) evaluate the reliability and validity of agility tests in team sports, (2) detail factors that may influence agility performance, and (3) identify the effects of different interventions on agility performance. The review was undertaken in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. We conducted a search of PubMed, Google Scholar, Science Direct, and SPORTDiscus databases. We assessed the methodological quality of intervention studies using a customized checklist of assessment criteria. Intraclass correlation coefficient values were 0.80-0.91, 0.10-0.81, and 0.81-0.99 for test time using light, video, and human stimuli. A low-level reliability was reported for youth athletes using the video stimulus (0.10-0.30). Higher-level participants were shown to be, on average, 7.5% faster than their lower level counterparts. Reaction time and accuracy, foot placement, and in-line lunge movement have been shown to be related to agility performance. The contribution of strength remains unclear. Efficacy of interventions on agility performance ranged from 1% (vibration training) to 7.5% (small-sided games training). Agility tests generally offer good reliability, although this may be compromised in younger participants responding to various scenarios. A human and/or video stimulus seems the most appropriate method to discriminate between standard of playing ability. Decision-making and perceptual factors are often propositioned as discriminant factors; however, the underlying mechanisms are relatively unknown. Research has focused predominantly on the physical element of agility. Small-sided games and video training may offer effective methods of improving agility, although practical issues may hinder the latter.

Benchmarking distributed data warehouse solutions for storing genomic variant information

PubMed Central

Wiewiórka, Marek S.; Wysakowicz, Dawid P.; Okoniewski, Michał J.

2017-01-01

Abstract Genomic-based personalized medicine encompasses storing, analysing and interpreting genomic variants as its central issues. At a time when thousands of patientss sequenced exomes and genomes are becoming available, there is a growing need for efficient database storage and querying. The answer could be the application of modern distributed storage systems and query engines. However, the application of large genomic variant databases to this problem has not been sufficiently far explored so far in the literature. To investigate the effectiveness of modern columnar storage [column-oriented Database Management System (DBMS)] and query engines, we have developed a prototypic genomic variant data warehouse, populated with large generated content of genomic variants and phenotypic data. Next, we have benchmarked performance of a number of combinations of distributed storages and query engines on a set of SQL queries that address biological questions essential for both research and medical applications. In addition, a non-distributed, analytical database (MonetDB) has been used as a baseline. Comparison of query execution times confirms that distributed data warehousing solutions outperform classic relational DBMSs. Moreover, pre-aggregation and further denormalization of data, which reduce the number of distributed join operations, significantly improve query performance by several orders of magnitude. Most of distributed back-ends offer a good performance for complex analytical queries, while the Optimized Row Columnar (ORC) format paired with Presto and Parquet with Spark 2 query engines provide, on average, the lowest execution times. Apache Kudu on the other hand, is the only solution that guarantees a sub-second performance for simple genome range queries returning a small subset of data, where low-latency response is expected, while still offering decent performance for running analytical queries. In summary, research and clinical applications that require the storage and analysis of variants from thousands of samples can benefit from the scalability and performance of distributed data warehouse solutions. Database URL: https://github.com/ZSI-Bio/variantsdwh PMID:29220442

El mejorar del lenguaje y la aprendizaje de los estudiantes que son sordos. Hoja de consejos de PEPNet (Improving the Language and Learning of Students Who Are Deaf. PEPNet Tipsheet)

ERIC Educational Resources Information Center

Livingston, Sue

2010-01-01

This version of "Improving the Language and Learning of Students Who Are Deaf. PEPNet Tipsheet," written in Spanish, offers some suggestions on improving the language and learning of students who are deaf. The saying "Good teaching is good teaching" holds considerable truth when thinking about exemplary practices used in educating students who are…

The Maoist Insurgency in Nepal: 1996-2001

DTIC Science & Technology

2002-04-09

Indian border is 1660 kilometers long and crisscrossed with paths and local roads. The best land routes into Nepal are from the South. The Chinese...offered Mumbai and Kandla as ports for export, but this largesse is offered on the assumption of good behavior and the Indians are quick to punish too...much independence. India has been seen to subsume Sikkim, and coerce Bhutan and Nepal is determined not to be absorbed as an Indian satellite state. This

Cognitive enhancement kept within contexts: neuroethics and informed public policy

PubMed Central

Shook, John R.; Galvagni, Lucia; Giordano, James

2014-01-01

Neurothics has far greater responsibilities than merely noting potential human enhancements arriving from novel brain-centered biotechnologies and tracking their implications for ethics and civic life. Neuroethics must utilize the best cognitive and neuroscientific knowledge to shape incisive discussions about what could possibly count as enhancement in the first place, and what should count as genuinely “cognitive” enhancement. Where cognitive processing and the mental life is concerned, the lived context of psychological performance is paramount. Starting with an enhancement to the mental abilities of an individual, only performances on real-world exercises can determine what has actually been cognitively improved. And what can concretely counts as some specific sort of cognitive improvement is largely determined by the classificatory frameworks of cultures, not brain scans or laboratory experiments. Additionally, where the public must ultimately evaluate and judge the worthiness of individual performance enhancements, we mustn’t presume that public approval towards enhancers will somehow automatically arrive without due regard to civic ideals such as the common good or social justice. In the absence of any nuanced appreciation for the control which performance contexts and public contexts exert over what “cognitive” enhancements could actually be, enthusiastic promoters of cognitive enhancement can all too easily depict safe and effective brain modifications as surely good for us and for society. These enthusiasts are not unaware of oft-heard observations about serious hurdles for reliable enhancement from neurophysiological modifications. Yet those observations are far more common than penetrating investigations into the implications to those hurdles for a sound public understanding of cognitive enhancement, and a wise policy review over cognitive enhancement. We offer some crucial recommendations for undertaking such investigations, so that cognitive enhancers that truly deserve public approval can be better identified. PMID:25538573

Shared Problem Models and Crew Decision Making

NASA Technical Reports Server (NTRS)

Orasanu, Judith; Statler, Irving C. (Technical Monitor)

1994-01-01

The importance of crew decision making to aviation safety has been well established through NTSB accident analyses: Crew judgment and decision making have been cited as causes or contributing factors in over half of all accidents in commercial air transport, general aviation, and military aviation. Yet the bulk of research on decision making has not proven helpful in improving the quality of decisions in the cockpit. One reason is that traditional analytic decision models are inappropriate to the dynamic complex nature of cockpit decision making and do not accurately describe what expert human decision makers do when they make decisions. A new model of dynamic naturalistic decision making is offered that may prove more useful for training or aiding cockpit decision making. Based on analyses of crew performance in full-mission simulation and National Transportation Safety Board accident reports, features that define effective decision strategies in abnormal or emergency situations have been identified. These include accurate situation assessment (including time and risk assessment), appreciation of the complexity of the problem, sensitivity to constraints on the decision, timeliness of the response, and use of adequate information. More effective crews also manage their workload to provide themselves with time and resources to make good decisions. In brief, good decisions are appropriate to the demands of the situation and reflect the crew's metacognitive skill. Effective crew decision making and overall performance are mediated by crew communication. Communication contributes to performance because it assures that all crew members have essential information, but it also regulates and coordinates crew actions and is the medium of collective thinking in response to a problem. This presentation will examine the relation between communication that serves to build performance. Implications of these findings for crew training will be discussed.

Healthy Learning.

ERIC Educational Resources Information Center

Kennedy, Mike

2003-01-01

Offers ten suggestions for schools and universities to help maintain a healthy indoor environment: proper flooring, sanitary washrooms, consistent maintenance, indoor air quality, preventing mold, daylighting, good acoustics, avoiding volatile organic compounds (VOCs), ergonomic furniture, and well-maintained roofs. (EV)

Financial Management: An Organic Approach

ERIC Educational Resources Information Center

Laux, Judy

2013-01-01

Although textbooks present corporate finance using a topical approach, good financial management requires an organic approach that integrates the various assignments financial managers confront every day. Breaking the tasks into meaningful subcategories, the current article offers one approach.

Learn to love exercise

MedlinePlus

... Sign up for a charity event. Charity events offer you the chance to walk, ski, run, or bike for a good cause. Not only are these events fun, but training for them can help keep your motivation up. ...

Embedded Hyperchaotic Generators: A Comparative Analysis

NASA Astrophysics Data System (ADS)

Sadoudi, Said; Tanougast, Camel; Azzaz, Mohamad Salah; Dandache, Abbas

In this paper, we present a comparative analysis of FPGA implementation performances, in terms of throughput and resources cost, of five well known autonomous continuous hyperchaotic systems. The goal of this analysis is to identify the embedded hyperchaotic generator which leads to designs with small logic area cost, satisfactory throughput rates, low power consumption and low latency required for embedded applications such as secure digital communications between embedded systems. To implement the four-dimensional (4D) chaotic systems, we use a new structural hardware architecture based on direct VHDL description of the forth order Runge-Kutta method (RK-4). The comparative analysis shows that the hyperchaotic Lorenz generator provides attractive performances compared to that of others. In fact, its hardware implementation requires only 2067 CLB-slices, 36 multipliers and no block RAMs, and achieves a throughput rate of 101.6 Mbps, at the output of the FPGA circuit, at a clock frequency of 25.315 MHz with a low latency time of 316 ns. Consequently, these good implementation performances offer to the embedded hyperchaotic Lorenz generator the advantage of being the best candidate for embedded communications applications.

Electrodeposition of nickel sulfide on graphene-covered make-up cotton as a flexible electrode material for high-performance supercapacitors

NASA Astrophysics Data System (ADS)

Li, Yiju; Ye, Ke; Cheng, Kui; Yin, Jinling; Cao, Dianxue; Wang, Guiling

2015-01-01

In this report, graphene nanosheets (GNS)/nickel sulfide (NiS) based material for high-performance supercapacitor is prepared by "dip and dry" and electrodeposition methods. Commercial flexible make-up cottons (MCs) are chose as skeletons to construct homogeneous three-dimensional (3D) interconnected graphene-wrapped macro-networks, which can support structures for high loading of active electrode materials and facilitate the access of electrolytes to active electrode materials. The hybrid GNS/NiS based MCs (denoted as MCs@GNS@NiS) electrode yields relatively high specific capacitance of 775 F g-1 at a charge/discharge specific current of 0.5 A g-1 and good capacitance retention of 88.1% after 1000 cycles at 2 A g-1. Furthermore, the MCs@GNS@NiS electrode delivers a high energy density of 11.2 Wh kg-1 at even a high power density of 1008 W kg-1. Therefore, such low-cost and high-performance energy MCs based on GNS/NiS hierarchical nanostructures offer great promise in large-scale energy storage device applications.

Examination of the Work Organization Assessment Questionnaire in public sector workers.

PubMed

Wynne-Jones, Gwenllian; Varnava, Alice; Buck, Rhiannon; Karanika-Murray, Maria; Griffiths, Amanda; Phillips, Ceri; Cox, Tom; Kahn, Sayeed; Main, Chris J

2009-05-01

To investigate the utility of the Work and Organization Assessment Questionnaire (WOAQ) for public sector data. A cross-sectional survey was performed in public sector organizations measuring demographics, work characteristics, work perceptions (WOAQ), sickness absence, and work performance. Confirmatory factor analysis of the WOAQ showed that factor structure derived for the manufacturing sector, for which the questionnaire was developed, could be replicated moderately well with public sector data. The study then considered whether a better more specific fit for public sector data was possible. Principal components analysis of the public sector data identified a two-factor structure linked to four of the five scales of the WOAQ assessing Management and Work Design, and Work Culture. These two factors may offer a context-sensitive scoring method for the WOAQ in public sector populations. These two factors were found to have good internal consistency, and correlated with the full WOAQ scales and the measures of performance and absence. The WOAQ is a useful and potentially transferable tool. The modified scoring may be used to assess work and organizational factors in the public sector.

Performance Testing of a Magnetically Suspended Double Gimbal Control Moment Gyro Based on the Single Axis Air Bearing Table

PubMed Central

Cui, Peiling; Zhang, Huijuan; Yan, Ning; Fang, Jiancheng

2012-01-01

Integrating the advantage of magnetic bearings with a double gimble control moment gyroscope (DGCMG), a magnetically suspended DGCMG (MSDGCMG) is an ideal actuator in high-precision, long life, and rapid maneuver attitude control systems. The work presented here mainly focuses on performance testing of a MSDGCMG independently developed by Beihang University, based on the single axis air bearing table. In this paper, taking into sufficient consideration to the moving-gimbal effects and the response bandwidth limit of the gimbal, a special MSDGCMG steering law is proposed subject to the limits of gimbal angle rate and angle acceleration. Finally, multiple experiments are carried out, with different MSDGCMG angular momenta as well as different desired attitude angles. The experimental results indicate that the MSDGCMG has a good gimbal angle rate and output torque tracking capabilities, and that the attitude stability with MSDGCMG as actuator is superior to 10−3°/s. The MSDGCMG performance testing in this paper, carried out under moving-base condition, will offer a technique base for the future research and application of MSDGCMGs. PMID:23012536

Governing for the Common Good.

PubMed

Ruger, Jennifer Prah

2015-12-01

The proper object of global health governance (GHG) should be the common good, ensuring that all people have the opportunity to flourish. A well-organized global society that promotes the common good is to everyone's advantage. Enabling people to flourish includes enabling their ability to be healthy. Thus, we must assess health governance by its effectiveness in enhancing health capabilities. Current GHG fails to support human flourishing, diminishes health capabilities and thus does not serve the common good. The provincial globalism theory of health governance proposes a Global Health Constitution and an accompanying Global Institute of Health and Medicine that together propose to transform health governance. Multiple lines of empirical research suggest that these institutions would be effective, offering the most promising path to a healthier, more just world.

Good Practices in Free-energy Calculations

NASA Technical Reports Server (NTRS)

Pohorille, Andrew; Jarzynski, Christopher; Chipot, Christopher

2013-01-01

As access to computational resources continues to increase, free-energy calculations have emerged as a powerful tool that can play a predictive role in drug design. Yet, in a number of instances, the reliability of these calculations can be improved significantly if a number of precepts, or good practices are followed. For the most part, the theory upon which these good practices rely has been known for many years, but often overlooked, or simply ignored. In other cases, the theoretical developments are too recent for their potential to be fully grasped and merged into popular platforms for the computation of free-energy differences. The current best practices for carrying out free-energy calculations will be reviewed demonstrating that, at little to no additional cost, free-energy estimates could be markedly improved and bounded by meaningful error estimates. In energy perturbation and nonequilibrium work methods, monitoring the probability distributions that underlie the transformation between the states of interest, performing the calculation bidirectionally, stratifying the reaction pathway and choosing the most appropriate paradigms and algorithms for transforming between states offer significant gains in both accuracy and precision. In thermodynamic integration and probability distribution (histogramming) methods, properly designed adaptive techniques yield nearly uniform sampling of the relevant degrees of freedom and, by doing so, could markedly improve efficiency and accuracy of free energy calculations without incurring any additional computational expense.

Deciphering the enigma of undetected species, phylogenetic, and functional diversity based on Good-Turing theory.

PubMed

Chao, Anne; Chiu, Chun-Huo; Colwell, Robert K; Magnago, Luiz Fernando S; Chazdon, Robin L; Gotelli, Nicholas J

2017-11-01

Estimating the species, phylogenetic, and functional diversity of a community is challenging because rare species are often undetected, even with intensive sampling. The Good-Turing frequency formula, originally developed for cryptography, estimates in an ecological context the true frequencies of rare species in a single assemblage based on an incomplete sample of individuals. Until now, this formula has never been used to estimate undetected species, phylogenetic, and functional diversity. Here, we first generalize the Good-Turing formula to incomplete sampling of two assemblages. The original formula and its two-assemblage generalization provide a novel and unified approach to notation, terminology, and estimation of undetected biological diversity. For species richness, the Good-Turing framework offers an intuitive way to derive the non-parametric estimators of the undetected species richness in a single assemblage, and of the undetected species shared between two assemblages. For phylogenetic diversity, the unified approach leads to an estimator of the undetected Faith's phylogenetic diversity (PD, the total length of undetected branches of a phylogenetic tree connecting all species), as well as a new estimator of undetected PD shared between two phylogenetic trees. For functional diversity based on species traits, the unified approach yields a new estimator of undetected Walker et al.'s functional attribute diversity (FAD, the total species-pairwise functional distance) in a single assemblage, as well as a new estimator of undetected FAD shared between two assemblages. Although some of the resulting estimators have been previously published (but derived with traditional mathematical inequalities), all taxonomic, phylogenetic, and functional diversity estimators are now derived under the same framework. All the derived estimators are theoretically lower bounds of the corresponding undetected diversities; our approach reveals the sufficient conditions under which the estimators are nearly unbiased, thus offering new insights. Simulation results are reported to numerically verify the performance of the derived estimators. We illustrate all estimators and assess their sampling uncertainty with an empirical dataset for Brazilian rain forest trees. These estimators should be widely applicable to many current problems in ecology, such as the effects of climate change on spatial and temporal beta diversity and the contribution of trait diversity to ecosystem multi-functionality. © 2017 by the Ecological Society of America.

Sensor Selection for Aircraft Engine Performance Estimation and Gas Path Fault Diagnostics

NASA Technical Reports Server (NTRS)

Simon, Donald L.; Rinehart, Aidan W.

2015-01-01

This paper presents analytical techniques for aiding system designers in making aircraft engine health management sensor selection decisions. The presented techniques, which are based on linear estimation and probability theory, are tailored for gas turbine engine performance estimation and gas path fault diagnostics applications. They enable quantification of the performance estimation and diagnostic accuracy offered by different candidate sensor suites. For performance estimation, sensor selection metrics are presented for two types of estimators including a Kalman filter and a maximum a posteriori estimator. For each type of performance estimator, sensor selection is based on minimizing the theoretical sum of squared estimation errors in health parameters representing performance deterioration in the major rotating modules of the engine. For gas path fault diagnostics, the sensor selection metric is set up to maximize correct classification rate for a diagnostic strategy that performs fault classification by identifying the fault type that most closely matches the observed measurement signature in a weighted least squares sense. Results from the application of the sensor selection metrics to a linear engine model are presented and discussed. Given a baseline sensor suite and a candidate list of optional sensors, an exhaustive search is performed to determine the optimal sensor suites for performance estimation and fault diagnostics. For any given sensor suite, Monte Carlo simulation results are found to exhibit good agreement with theoretical predictions of estimation and diagnostic accuracies.

Sensor Selection for Aircraft Engine Performance Estimation and Gas Path Fault Diagnostics

NASA Technical Reports Server (NTRS)

Simon, Donald L.; Rinehart, Aidan W.

2016-01-01

This paper presents analytical techniques for aiding system designers in making aircraft engine health management sensor selection decisions. The presented techniques, which are based on linear estimation and probability theory, are tailored for gas turbine engine performance estimation and gas path fault diagnostics applications. They enable quantification of the performance estimation and diagnostic accuracy offered by different candidate sensor suites. For performance estimation, sensor selection metrics are presented for two types of estimators including a Kalman filter and a maximum a posteriori estimator. For each type of performance estimator, sensor selection is based on minimizing the theoretical sum of squared estimation errors in health parameters representing performance deterioration in the major rotating modules of the engine. For gas path fault diagnostics, the sensor selection metric is set up to maximize correct classification rate for a diagnostic strategy that performs fault classification by identifying the fault type that most closely matches the observed measurement signature in a weighted least squares sense. Results from the application of the sensor selection metrics to a linear engine model are presented and discussed. Given a baseline sensor suite and a candidate list of optional sensors, an exhaustive search is performed to determine the optimal sensor suites for performance estimation and fault diagnostics. For any given sensor suite, Monte Carlo simulation results are found to exhibit good agreement with theoretical predictions of estimation and diagnostic accuracies.

Restructuring the Production of Medicines: An Investigation on the Pharmaceutical Sector in China and the Role of Mergers and Acquisitions

PubMed Central

Barbieri, Elisa; Huang, Manli; Pi, Shenglei; Tassinari, Mattia

2017-01-01

In places like China, an ageing population coupled with changes in living standards and increases in disposable income, imply a shift of the demand for health-related goods and services which is likely to affect the whole organization of the industries that supply such goods and services at the global level. One of the industries most likely to be affected is the pharmaceutical sector. In the early 2000s China was already the second largest global producer of pharmaceutical ingredients. The pharmaceutical sector has become one of the most important industries promoted by the Chinese government and Five-Year Plan of China’s Strategic Emerging Sectors, mergers and acquisition (M&A) activity has been the key strategy to restructure the sector and increase its competitiveness. This paper firstly provides an updated picture of the evolution of M&As in the pharmaceutical sector, compared to other sectors, in China in the period 2005–2013. Secondly, we develop a composite indicator to measure the industrial performance of all Chinese industrial sectors over time, which allows us to assess the performance of the pharmaceutical industry compared to that of other sectors of the Chinese economy. Finally, we develop and estimate an empirical model that tests the relationship between the number of M&A in a sector and its performance, with a particular focus on the pharmaceutical case. The results offer some initial evidence of positive effects from the process of restructuring of the pharmaceutical sector in China. PMID:28981463

Examining the diagnostic utility of the DSM-5 PTSD symptoms among male and female returning veterans.

PubMed

Green, Jonathan D; Annunziata, Anthony; Kleiman, Sarah E; Bovin, Michelle J; Harwell, Aaron M; Fox, Annie M L; Black, Shimrit K; Schnurr, Paula P; Holowka, Darren W; Rosen, Raymond C; Keane, Terence M; Marx, Brian P

2017-08-01

Posttraumatic stress disorder (PTSD) diagnostic criteria have been criticized for including symptoms that overlap with commonly comorbid disorders, which critics argue undermines the validity of the diagnosis and inflates psychiatric comorbidity rates. In response, the upcoming 11th edition of the International Classification of Diseases (ICD-11) will offer PTSD diagnostic criteria that are intended to promote diagnostic accuracy. However, diagnostic utility analyses have not yet assessed whether these criteria minimize diagnostic errors. The present study examined the diagnostic utility of each PTSD symptom in the fifth edition of the Diagnostic and Statistical Manual for Mental Disorders (DSM-5) for males and females. Participants were 1,347 individuals enrolled in a longitudinal national registry of returning veterans receiving care at a Department of Veterans Affairs (VA) facility. Doctoral level clinicians assessed all participants using the PTSD module of the Structured Clinical Interview for DSM. Of the 20 symptoms examined, the majority performed in the fair to poor range on test quality indices. Although a few items did perform in the good (or better) range, only half were ICD-11 symptoms. None of the 20 symptoms demonstrated good quality of efficiency. Results demonstrated few sex differences across indices. There were no differences in the proportion of comorbid psychiatric disorders or functional impairment between DSM-5 and ICD-11 criteria. ICD-11 PTSD criteria demonstrate neither greater diagnostic specificity nor reduced rates of comorbidity relative to DSM-5 criteria and, as such, do not perform as intended. Modifications to existing symptoms or new symptoms may improve differential diagnosis. © 2017 Wiley Periodicals, Inc.

Restructuring the Production of Medicines: An Investigation on the Pharmaceutical Sector in China and the Role of Mergers and Acquisitions.

PubMed

Barbieri, Elisa; Huang, Manli; Pi, Shenglei; Tassinari, Mattia

2017-10-05

In places like China, an ageing population coupled with changes in living standards and increases in disposable income, imply a shift of the demand for health-related goods and services which is likely to affect the whole organization of the industries that supply such goods and services at the global level. One of the industries most likely to be affected is the pharmaceutical sector. In the early 2000s China was already the second largest global producer of pharmaceutical ingredients. The pharmaceutical sector has become one of the most important industries promoted by the Chinese government and Five-Year Plan of China's Strategic Emerging Sectors, mergers and acquisition (M&A) activity has been the key strategy to restructure the sector and increase its competitiveness. This paper firstly provides an updated picture of the evolution of M&As in the pharmaceutical sector, compared to other sectors, in China in the period 2005-2013. Secondly, we develop a composite indicator to measure the industrial performance of all Chinese industrial sectors over time, which allows us to assess the performance of the pharmaceutical industry compared to that of other sectors of the Chinese economy. Finally, we develop and estimate an empirical model that tests the relationship between the number of M&A in a sector and its performance, with a particular focus on the pharmaceutical case. The results offer some initial evidence of positive effects from the process of restructuring of the pharmaceutical sector in China.

Pansharpening in coastal ecosystems using Worldview-2 imagery

NASA Astrophysics Data System (ADS)

Ibarrola-Ulzurrun, Edurne; Marcello-Ruiz, Javier; Gonzalo-Martin, Consuelo

2016-10-01

Both climate change and anthropogenic pressure impacts are producing a declining in ecosystem natural resources. In this work, a vulnerable coastal ecosystem, Maspalomas Natural Reserve (Canary Islands, Spain), is analyzed. The development of advanced image processing techniques, applied to new satellites with very high resolution sensors (VHR), are essential to obtain accurate and systematic information about such natural areas. Thus, remote sensing offers a practical and cost-effective means for a good environmental management although some improvements are needed by the application of pansharpening techniques. A preliminary assessment was performed selecting classical and new algorithms that could achieve good performance with WorldView-2 imagery. Moreover, different quality indices were used in order to asses which pansharpening technique gives a better fused image. A total of 7 pansharpening algorithms were analyzed using 6 spectral and spatial quality indices. The quality assessment was implemented for the whole set of multispectral bands and for those bands covered by the wavelength range of the panchromatic image and outside of it. After an extensive evaluation, the most suitable algorithm was the Weighted Wavelet `à trous' through Fractal Dimension Maps technique which provided the best compromise between the spectral and spatial quality for the image. Finally, Quality Map Analysis was performed in order to study the fusion in each band at local level. As conclusion, novel analysis has been conducted covering the evaluation of fusion methods in shallow water areas. Hence, the excellent results provided by this study have been applied to the generation of challenging thematic maps of coastal and dunes protected areas.

Competencies to enable learning-focused clinical supervision: a thematic analysis of the literature.

PubMed

Pront, Leeanne; Gillham, David; Schuwirth, Lambert W T

2016-04-01

Clinical supervision is essential for development of health professional students and widely recognised as a significant factor influencing student learning. Although considered important, delivery is often founded on personal experience or a series of predetermined steps that offer standardised behavioural approaches. Such a view may limit the capacity to promote individualised student learning in complex clinical environments. The objective of this review was to develop a comprehensive understanding of what is considered 'good' clinical supervision, within health student education. The literature provides many perspectives, so collation and interpretation were needed to aid development and understanding for all clinicians required to perform clinical supervision within their daily practice. A comprehensive thematic literature review was carried out, which included a variety of health disciplines and geographical environments. Literature addressing 'good' clinical supervision consists primarily of descriptive qualitative research comprising mostly small studies that repeated descriptions of student and supervisor opinions of 'good' supervision. Synthesis and thematic analysis of the literature resulted in four 'competency' domains perceived to inform delivery of learning-focused or 'good' clinical supervision. Domains understood to promote student learning are co-dependent and include 'to partner', 'to nurture', 'to engage' and 'to facilitate meaning'. Clinical supervision is a complex phenomenon and establishing a comprehensive understanding across health disciplines can influence the future health workforce. The learning-focused clinical supervision domains presented here provide an alternative perspective of clinical supervision of health students. This paper is the first step in establishing a more comprehensive understanding of learning-focused clinical supervision, which may lead to development of competencies for clinical supervision. © 2016 John Wiley & Sons Ltd.

Numerical analysis and experiment research on fluid orbital performance of vane type propellant management device

NASA Astrophysics Data System (ADS)

Hu, Q.; Li, Y.; Pan, H. L.; Liu, J. T.; Zhuang, B. T.

2015-01-01

Vane type propellant management device (PMD) is one of the key components of the vane-type surface tension tank (STT), and its fluid orbital performance directly determines the STT's success or failure. In present paper, numerical analysis and microgravity experiment study on fluid orbital performance of a vane type PMD were carried out. By using two-phase flow model of volume of fluid (VOF), fluid flow characteristics in the tank with the vane type PMD were numerically calculated, and the rules of fluid transfer and distribution were gotten. A abbreviate model test system of the vane type PMD is established and microgravity drop tower tests were performed, then fluid management and transmission rules of the vane type PMD were obtained under microgravity environment. The analysis and tests results show that the vane type PMD has good and initiative fluid orbital management ability and meets the demands of fluid orbital extrusion in the vane type STT. The results offer valuable guidance for the design and optimization of the new generation of vane type PMD, and also provide a new approach for fluid management and control in space environment.

Development of compact particle detectors for space based instruments

NASA Astrophysics Data System (ADS)

Barner, Lindsey; Grove, Andrew; Mohler, Jacob; Sisson, Caleb; Roth, Alex; Kryemadhi, Abaz

2017-01-01

The Silicon Photomultipliers (SiPMs) are new photon-detectors which have been increasingly used in particle physics. Their small size, good single photon resolution, simple readout, and immunity to magnetic fields offers benefits compared to traditional photomultipliers. LYSO and CeBr3 crystals are relatively new scintillators with high stopping power, very good light yield and fast decay time. The response of these detectors to low energy gamma rays will be presented. NASA Pennsylvania Space Grant Consortium.

Escoja Alimentos Sanos y Que Deben Hacer los Padres de los Ninos Que Pesan Mucho. (Food Choices for Good Health and Children and Weight: What's a Parent To Do?).

ERIC Educational Resources Information Center

Ikeda, Joanne P.; Mitchell, Rita

These two publications offer parents information on food choices for children and children's weight. The first publication is a guide that lists, for each of the five food groups, which foods should be eaten often, sometimes, or rarely in order to maintain good health. The food groups are: (1) milk and milk products; (2) meats, poultry, fish,…

Employee Resistance to Computer Technology.

ERIC Educational Resources Information Center

Ewert, Alan

1984-01-01

The introduction of computers to the work place may cause employee stress. Aggressive, protective, and avoidance behaviors are forms of staff resistance. The development of good training programs will enhance productivity. Suggestions for evaluating computer systems are offered. (DF)

Freight tricycle operations in New York City.

DOT National Transportation Integrated Search

2014-10-01

As cities become more congested and increasingly focused on sustainability, cargo cycles offer a potential alternative to motorized vehicles for local and : last : - : mile goods delivery. However, few studies have examined this mode in the North Ame...

Some Improved Diagnostics for Failure of The Rasch Model.

ERIC Educational Resources Information Center

Molenaar, Ivo W.

1983-01-01

Goodness of fit tests for the Rasch model are typically large-sample, global measures. This paper offers suggestions for small-sample exploratory techniques for examining the fit of item data to the Rasch model. (Author/JKS)

Arbitration Is Good for You and Teachers, So Learn to Do It Right.

ERIC Educational Resources Information Center

Singer, David, Jr.

1986-01-01

Arbitration is an effective way to resolve disagreements between school systems and their employee unions. A practicing arbitrator offers some suggestions that encourage the best use of the arbitration process. (MLF)

Object relations in Harry Potter.

PubMed

Lake, Suzanne

2003-01-01

Good fiction helps children address their emotional dilemmas by evoking repressed content, and offering strategies and meaningful values that help them work towards resolutions. Because certain fundamental conflicts continue to be revisited and reworked throughout adulthood, it follows that masterful children's literature might enthrall adults as well. Given the extraordinary, worldwide success of the Harry Potter stories with both children and adults, it might be inferred that they, indeed, are among such literature. Common object relations themes, as well as other intrapsychic processes, are presented in such an imaginative and resonant way that the unconscious is readily engaged. The character of Harry Potter, specifically, embodies such universal (repressed) torments as the agony of destroying and losing the mother; the ominous perception of good and bad objects at war within the self; and the earnest reparative efforts offered to save the self from eternal separation from the beloved other.

Hypnobirth within the NHS: time to ditch the parent craft?

PubMed

Gavin-Jones, Teri

2016-05-01

Antenatal education within the National Health Service (NHS) is a service in decline within some hospital trusts. Classes on offer are being moved into online formats or discontinued completely. Whilst research into antenatal education remains limited, what is known is that good birth preparation is of value. "Participative preparation for childbirth can enhance women's overall satisfaction with the childbirth experience" (Schrader McMillan et al 2009: 49). There are pockets of excellent antenatal education within the NHS, but no system for regulating the quality and content. Traditional 'parent craft' classes can be oversubscribed, turning what should be a participative group into an audience. Offering good quality antenatal education has the potential to increase normality, improve the birth outcome and the experience of both woman and her birth partner. Is it time to ditch the parent craft and implement dynamic woman-focused education?

'Medical ethics'--an alternative approach.

PubMed Central

Haldane, J J

1986-01-01

Contemporary medical ethics is generally concerned with the application of ethical theory to medico-moral dilemmas and with the critical analysis of the concepts of medicine. This paper presents an alternative programme: the development of a medical philosophy which, by taking as its starting point the two questions: what is man? and, what constitutes goodness in life? offers an account of health as one of the primary concepts of value. This view of the subject resembles that implied by ancient theories of goodness, and in later sections of the paper it is shown how Aristotle points us towards a coherent theory of human nature as psycho-physical, which overcomes the inadequacies of dualism and physicalist reductionism. What is on offer therefore, is the prospect of an integrated account of human nature and of what constitutes its flourishing: to be healthy is to be an active unity-of-parts in equilibrium. PMID:3761336

Supercapacitors based on c-type cytochromes using conductive nanostructured networks of living bacteria.

PubMed

Malvankar, Nikhil S; Mester, Tünde; Tuominen, Mark T; Lovley, Derek R

2012-02-01

Supercapacitors have attracted interest in energy storage because they have the potential to complement or replace batteries. Here, we report that c-type cytochromes, naturally immersed in a living, electrically conductive microbial biofilm, greatly enhance the device capacitance by over two orders of magnitude. We employ genetic engineering, protein unfolding and Nernstian modeling for in vivo demonstration of charge storage capacity of c-type cytochromes and perform electrochemical impedance spectroscopy, cyclic voltammetry and charge-discharge cycling to confirm the pseudocapacitive, redox nature of biofilm capacitance. The biofilms also show low self-discharge and good charge/discharge reversibility. The superior electrochemical performance of the biofilm is related to its high abundance of cytochromes, providing large electron storage capacity, its nanostructured network with metallic-like conductivity, and its porous architecture with hydrous nature, offering prospects for future low cost and environmentally sustainable energy storage devices. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

pyRMSD: a Python package for efficient pairwise RMSD matrix calculation and handling.

PubMed

Gil, Víctor A; Guallar, Víctor

2013-09-15

We introduce pyRMSD, an open source standalone Python package that aims at offering an integrative and efficient way of performing Root Mean Square Deviation (RMSD)-related calculations of large sets of structures. It is specially tuned to do fast collective RMSD calculations, as pairwise RMSD matrices, implementing up to three well-known superposition algorithms. pyRMSD provides its own symmetric distance matrix class that, besides the fact that it can be used as a regular matrix, helps to save memory and increases memory access speed. This last feature can dramatically improve the overall performance of any Python algorithm using it. In addition, its extensibility, testing suites and documentation make it a good choice to those in need of a workbench for developing or testing new algorithms. The source code (under MIT license), installer, test suites and benchmarks can be found at https://pele.bsc.es/ under the tools section. victor.guallar@bsc.es Supplementary data are available at Bioinformatics online.

Another step towards photodetector innovation: The first 1-inch industrial VSiPMT

NASA Astrophysics Data System (ADS)

Barbarino, G.; Barbato, F. C. T.; Mollo, C. M.; Nocerino, E.; Vivolo, D.; Fukasawa, A.

2018-09-01

The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an original design for an innovative light detector we proposed with the aim to create new scientific instrumentation for future missions of exploration and observation of the universe. The idea behind this device is to replace the classical dynode chain of a photomultiplier tube with a silicon photomultiplier, the latter acting as an electron detector and amplifier. In this way we obtain a large area photodetector with an excellent photon counting, proper of the SiPMs, but with the dark noise of only one SiPM (1-inch is equivalent to ∼ 54 SiPM 3 × 3 mm2). From this point of view, the VSiPMT offers very attractive features and unprecedented performance in large area detection, such as: negligible power consumption, excellent SPE resolution, easy low-voltage-based stabilization and very good time performance. Hamamatsu realized for our group a 1-inch prototype. The results of the full characterization of the device are presented in this work.

Sexual dysfunction after liver transplantation.

PubMed

Burra, Patrizia

2009-11-01

1. The goal of liver transplantation is not only to ensure the survival of patients but also to offer patients the opportunity to achieve a good balance between the functional efficacy of the graft and their psychological and physical integrity. The quality of life after transplantation may be affected by unsatisfactory sexual activity and reproductive performance. 2. Sexual dysfunction and sex hormone disturbances are widely reported in men and women with chronic liver disease before liver transplantation. 3. Successful liver transplantation should lead to improvements in sexual function and sex hormone disturbances in both men and women, therefore improving reproductive performance, but immunosuppressive drugs may interfere with hormone metabolism. 4. Pregnancy is often successful after liver transplantation, despite the potentially toxic effects of immunosuppressive drug therapy, but fetal and maternal outcomes should be regularly assessed. 5. More detailed and comprehensive data are needed in the field of sexual function after transplantation, and new strategies are needed to support and inform patients on the waiting list and after liver transplantation. (c) 2009 AASLD.

The development of differential inductors using double air-bridge structure based on integrated passive device technology

NASA Astrophysics Data System (ADS)

Li, Yang; Yao, Zhao; Fu, Xiao-Qian; Li, Zhi-Ming; Shan, Fu-Kai; Wang, Cong

2017-05-01

Recently, integrated passive devices have become increasingly popular; inductor realization, in particular, offers interesting high performance for RF modules and systems. In this paper, a development of differential inductor fabricated by integrated passive devices technology using a double air-bridge structure is presented. A study of the model development of the differential inductor is first demonstrated. In this model section, a segment box analysis method is applied to provide a clear presentation of the differential inductor. Compared with other work that only shows a brief description of the process, the integrated passive devices process used to fabricate the inductor in this study is elaborated on. Finally, a characterization of differential inductors with different physical layout parameters is illustrated based on inductance and quality factors, which provides a valuable reference for realizing high performance. The proposed work provides a good solution for the design, fabrication and practical application of RF modules and systems.

Unsteady Probabilistic Analysis of a Gas Turbine System

NASA Technical Reports Server (NTRS)

Brown, Marilyn

2003-01-01

In this work, we have considered an annular cascade configuration subjected to unsteady inflow conditions. The unsteady response calculation has been implemented into the time marching CFD code, MSUTURBO. The computed steady state results for the pressure distribution demonstrated good agreement with experimental data. We have computed results for the amplitudes of the unsteady pressure over the blade surfaces. With the increase in gas turbine engine structural complexity and performance over the past 50 years, structural engineers have created an array of safety nets to ensure against component failures in turbine engines. In order to reduce what is now considered to be excessive conservatism and yet maintain the same adequate margins of safety, there is a pressing need to explore methods of incorporating probabilistic design procedures into engine development. Probabilistic methods combine and prioritize the statistical distributions of each design variable, generate an interactive distribution and offer the designer a quantified relationship between robustness, endurance and performance. The designer can therefore iterate between weight reduction, life increase, engine size reduction, speed increase etc.

Amorphous TiO2 Shells: A Vital Elastic Buffering Layer on Silicon Nanoparticles for High-Performance and Safe Lithium Storage.

PubMed

Yang, Jianping; Wang, Yunxiao; Li, Wei; Wang, Lianjun; Fan, Yuchi; Jiang, Wan; Luo, Wei; Wang, Yang; Kong, Biao; Selomulya, Cordelia; Liu, Hua Kun; Dou, Shi Xue; Zhao, Dongyuan

2017-12-01

Smart surface coatings of silicon (Si) nanoparticles are shown to be good examples for dramatically improving the cyclability of lithium-ion batteries. Most coating materials, however, face significant challenges, including a low initial Coulombic efficiency, tedious processing, and safety assessment. In this study, a facile sol-gel strategy is demonstrated to synthesize commercial Si nanoparticles encapsulated by amorphous titanium oxide (TiO 2 ), with core-shell structures, which show greatly superior electrochemical performance and high-safety lithium storage. The amorphous TiO 2 shell (≈3 nm) shows elastic behavior during lithium discharging and charging processes, maintaining high structural integrity. Interestingly, it is found that the amorphous TiO 2 shells offer superior buffering properties compared to crystalline TiO 2 layers for unprecedented cycling stability. Moreover, accelerating rate calorimetry testing reveals that the TiO 2 -encapsulated Si nanoparticles are safer than conventional carbon-coated Si-based anodes. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Aerodynamic Characteristics of Two Waverider-Derived Hypersonic Cruise Configurations

NASA Technical Reports Server (NTRS)

Cockrell, Charles E., Jr.; Huebner, Lawrence D.; Finley, Dennis B.

1996-01-01

An evaluation was made on the effects of integrating the required aircraft components with hypersonic high-lift configurations known as waveriders to create hypersonic cruise vehicles. Previous studies suggest that waveriders offer advantages in aerodynamic performance and propulsion/airframe integration (PAI) characteristics over conventional non-waverider hypersonic shapes. A wind-tunnel model was developed that integrates vehicle components, including canopies, engine components, and control surfaces, with two pure waverider shapes, both conical-flow-derived waveriders for a design Mach number of 4.0. Experimental data and limited computational fluid dynamics (CFD) solutions were obtained over a Mach number range of 1.6 to 4.63. The experimental data show the component build-up effects and the aerodynamic characteristics of the fully integrated configurations, including control surface effectiveness. The aerodynamic performance of the fully integrated configurations is not comparable to that of the pure waverider shapes, but is comparable to previously tested hypersonic models. Both configurations exhibit good lateral-directional stability characteristics.

Advances in covalent organic frameworks in separation science.

PubMed

Qian, Hai-Long; Yang, Cheng-Xiong; Wang, Wen-Long; Yang, Cheng; Yan, Xiu-Ping

2018-03-23

Covalent organic frameworks (COFs) are a new class of multifunctional crystalline organic polymer constructed with organic monomers via robust covalent bonds. The unique properties such as convenient modification, low densities, large specific surface areas, good stability and permanent porosity make COFs great potential in separation science. This review shows the state-of-the art for the application of COFs and their composites in analytical separation science. COFs and their composites have been explored as promising sorbents for solid phase extraction, potential coatings for solid phase microextraction, and novel stationary phases for gas chromatography, high-performance liquid chromatography and capillary electrochromatography. The prospects of COFs for separation science are also presented, which can offer an outlook and reference for further study on the applications of COFs. Copyright © 2018 Elsevier B.V. All rights reserved.

Value analysis for advanced technology products

NASA Astrophysics Data System (ADS)

Soulliere, Mark

2011-03-01

Technology by itself can be wondrous, but buyers of technology factor in the price they have to pay along with performance in their decisions. As a result, the ``best'' technology may not always win in the marketplace when ``good enough'' can be had at a lower price. Technology vendors often set pricing by ``cost plus margin,'' or by competitors' offerings. What if the product is new (or has yet to be invented)? Value pricing is a methodology to price products based on the value generated (e.g. money saved) by using one product vs. the next best technical alternative. Value analysis can often clarify what product attributes generate the most value. It can also assist in identifying market forces outside of the control of the technology vendor that also influence pricing. These principles are illustrated with examples.

Political Impetus: Towards a Successful Agenda-Setting for Inclusive Health Policies in Low- and Middle-Income Countries Comment on "Shaping the Health Policy Agenda: The Case of Safe Motherhood Policy in Vietnam".

PubMed

Yang, Xiaoguang; Qian, Xu

2016-02-04

Agenda-setting is a crucial step for inclusive health policies in the low- and middle-income countries (LMICs). Enlightened by Ha et al manuscript, this commentary paper argues that 'political impetus' is the key to the successful agenda-setting of health policies in LMICs, though other determinants may also play the role during the process. This Vietnamese case study presents a good example for policy-makers of other LMICs; it offers insights for contexts where there are limited health resources and poor health performance. Further research which compares various stages of the health policy process across countries, is much needed. © 2016 by Kerman University of Medical Sciences.

Test of the Chevallier-Polarski-Linder parametrization for rapid dark energy equation of state transitions

NASA Astrophysics Data System (ADS)

Linden, Sebastian; Virey, Jean-Marc

2008-07-01

We test the robustness and flexibility of the Chevallier-Polarski-Linder (CPL) parametrization of the dark energy equation of state w(z)=w0+wa(z)/(1+z) in recovering a four-parameter steplike fiducial model. We constrain the parameter space region of the underlying fiducial model where the CPL parametrization offers a reliable reconstruction. It turns out that non-negligible biases leak into the results for recent (z<2.5) rapid transitions, but that CPL yields a good reconstruction in all other cases. The presented analysis is performed with supernova Ia data as forecasted for a space mission like SNAP/JDEM, combined with future expectations for the cosmic microwave background shift parameter R and the baryonic acoustic oscillation parameter A.

Meloxicam and surgical denervation of the coxofemoral joint for the treatment of degenerative osteoarthritis in a Bengal tiger (Panthera tigris tigris).

PubMed

Whiteside, Douglas P; Remedios, Audrey M; Black, Sandra R; Finn-Bodner, Susan T

2006-09-01

An adult male white Bengal tiger (Panthera tigris tigris) with pronounced atrophy of the pelvic musculature was diagnosed with degenerative osteoarthritis of the coxofemoral joints. Initial management with the nonsteroidal anti-inflammatory drug meloxicam and a semisynthetic sodium pentosan polysulfate resulted in clinical improvement and radiographic stabilization of the arthritic condition over several months. However, because pain was still evident, bilateral denervation of the coxofemoral joints was performed, successfully ameliorating the signs of osteoarthritic pain in the tiger. Meloxicam has shown good clinical efficacy for the treatment of osteoarthritis and other painful conditions in large felids. Coxofemoral joint denervation offers many advantages for the treatment of osteoarthritis in exotic carnivore species, and should be considered a viable treatment modality.

Prediction of ball and roller bearing thermal and kinematic performance by computer analysis

NASA Technical Reports Server (NTRS)

Pirvics, J.; Kleckner, R. J.

1983-01-01

Characteristics of good computerized analysis software are suggested. These general remarks and an overview of representative software precede a more detailed discussion of load support system analysis program structure. Particular attention is directed at a recent cylindrical roller bearing analysis as an example of the available design tools. Selected software modules are then examined to reveal the detail inherent in contemporary analysis. This leads to a brief section on current design computation which seeks to suggest when and why computerized analysis is warranted. An example concludes the argument offered for such design methodology. Finally, remarks are made concerning needs for model development to address effects which are now considered to be secondary but are anticipated to emerge to primary status in the near future.

Robust adaptive uniform exact tracking control for uncertain Euler-Lagrange system

NASA Astrophysics Data System (ADS)

Yang, Yana; Hua, Changchun; Li, Junpeng; Guan, Xinping

2017-12-01

This paper offers a solution to the robust adaptive uniform exact tracking control for uncertain nonlinear Euler-Lagrange (EL) system. An adaptive finite-time tracking control algorithm is designed by proposing a novel nonsingular integral terminal sliding-mode surface. Moreover, a new adaptive parameter tuning law is also developed by making good use of the system tracking errors and the adaptive parameter estimation errors. Thus, both the trajectory tracking and the parameter estimation can be achieved in a guaranteed time adjusted arbitrarily based on practical demands, simultaneously. Additionally, the control result for the EL system proposed in this paper can be extended to high-order nonlinear systems easily. Finally, a test-bed 2-DOF robot arm is set-up to demonstrate the performance of the new control algorithm.

Graphene/Pentacene Barristor with Ion-Gel Gate Dielectric: Flexible Ambipolar Transistor with High Mobility and On/Off Ratio.

PubMed

Oh, Gwangtaek; Kim, Jin-Soo; Jeon, Ji Hoon; Won, EunA; Son, Jong Wan; Lee, Duk Hyun; Kim, Cheol Kyeom; Jang, Jingon; Lee, Takhee; Park, Bae Ho

2015-07-28

High-quality channel layer is required for next-generation flexible electronic devices. Graphene is a good candidate due to its high carrier mobility and unique ambipolar transport characteristics but typically shows a low on/off ratio caused by gapless band structure. Popularly investigated organic semiconductors, such as pentacene, suffer from poor carrier mobility. Here, we propose a graphene/pentacene channel layer with high-k ion-gel gate dielectric. The graphene/pentacene device shows both high on/off ratio and carrier mobility as well as excellent mechanical flexibility. Most importantly, it reveals ambipolar behaviors and related negative differential resistance, which are controlled by external bias. Therefore, our graphene/pentacene barristor with ion-gel gate dielectric can offer various flexible device applications with high performances.

Imaging in anatomy: a comparison of imaging techniques in embalmed human cadavers

PubMed Central

2013-01-01

Background A large variety of imaging techniques is an integral part of modern medicine. Introducing radiological imaging techniques into the dissection course serves as a basis for improved learning of anatomy and multidisciplinary learning in pre-clinical medical education. Methods Four different imaging techniques (ultrasound, radiography, computed tomography, and magnetic resonance imaging) were performed in embalmed human body donors to analyse possibilities and limitations of the respective techniques in this peculiar setting. Results The quality of ultrasound and radiography images was poor, images of computed tomography and magnetic resonance imaging were of good quality. Conclusion Computed tomography and magnetic resonance imaging have a superior image quality in comparison to ultrasound and radiography and offer suitable methods for imaging embalmed human cadavers as a valuable addition to the dissection course. PMID:24156510

Fully Printed Stretchable Thin-Film Transistors and Integrated Logic Circuits.

PubMed

Cai, Le; Zhang, Suoming; Miao, Jinshui; Yu, Zhibin; Wang, Chuan

2016-12-27

This paper reports intrinsically stretchable thin-film transistors (TFTs) and integrated logic circuits directly printed on elastomeric polydimethylsiloxane (PDMS) substrates. The printed devices utilize carbon nanotubes and a type of hybrid gate dielectric comprising PDMS and barium titanate (BaTiO 3 ) nanoparticles. The BaTiO 3 /PDMS composite simultaneously provides high dielectric constant, superior stretchability, low leakage, as well as good printability and compatibility with the elastomeric substrate. Both TFTs and logic circuits can be stretched beyond 50% strain along either channel length or channel width directions for thousands of cycles while showing no significant degradation in electrical performance. This work may offer an entry into more sophisticated stretchable electronic systems with monolithically integrated sensors, actuators, and displays, fabricated by scalable and low-cost methods for real life applications.

Development of Analytical Plug-ins for ENSITE: Version 1.0

DTIC Science & Technology

2017-11-01

ENSITE’s core-software platform builds upon leading geospatial platforms already in use by the Army and is designed to offer an easy-to-use, customized ...use by the Army and is designed to offer an easy-to-use, customized set of workflows for CB planners. Within this platform are added software compo...public good . Find out more at www.erdc.usace.army.mil. To search for other technical reports published by ERDC, visit the ERDC online library at

A Novel Instrument and Methodology for the In-Situ Measurement of the Stress in Thin Films

NASA Technical Reports Server (NTRS)

Broadway, David M.; Omokanwaye, Mayowa O.; Ramsey, Brian D.

2014-01-01

We introduce a novel methodology for the in-situ measurement of mechanical stress during thin film growth utilizing a highly sensitive non-contact variation of the classic spherometer. By exploiting the known spherical deformation of the substrate the value of the stress induced curvature is inferred by measurement of only one point on the substrate's surface-the sagittal. From the known curvature the stress can be calculated using the well-known Stoney equation. Based on this methodology, a stress sensor has been designed which is simple, highly sensitive, compact, and low cost. As a result of its compact nature, the sensor can be mounted in any orientation to accommodate a given deposition geometry without the need for extensive modification to an already existing deposition system. The technique employs the use of a double side polished substrate that offers good specular reflectivity and is isotropic in its mechanical properties, such as <111> oriented crystalline silicon or amorphous soda lime glass, for example. The measurement of the displacement of the uncoated side during deposition is performed with a high resolution (i.e. 5nm), commercially available, inexpensive, fiber optic sensor which can be used in both high vacuum and high temperature environments (i.e. 10(exp-7) Torr and 480oC, respectively). A key attribute of this instrument lies in its potential to achieve sensitivity that rivals other measurement techniques such as the micro cantilever method but, due to the comparatively larger substrate area, offers a more robust and practical alternative for subsequent measurement of additional characteristics of the film that can might be correlated to film stress. We present measurement results of nickel films deposited by magnetron sputtering which show good qualitative agreement to the know behavior of polycrystalline films previously reported by Hoffman.

Private sector, for-profit health providers in low and middle income countries: can they reach the poor at scale?

PubMed

Tung, Elizabeth; Bennett, Sara

2014-06-24

The bottom of the pyramid concept suggests that profit can be made in providing goods and services to poor people, when high volume is combined with low margins. To-date there has been very limited empirical evidence from the health sector concerning the scope and potential for such bottom of the pyramid models. This paper analyzes private for-profit (PFP) providers currently offering services to the poor on a large scale, and assesses the future prospects of bottom of the pyramid models in health. We searched published and grey literature and databases to identify PFP companies that provided more than 40,000 outpatient visits per year, or who covered 15% or more of a particular type of service in their country. For each included provider, we searched for additional information on location, target market, business model and performance, including quality of care. Only 10 large scale PFP providers were identified. The majority of these were in South Asia and most provided specialized services such as eye care. The characteristics of the business models of these firms were found to be similar to non-profit providers studied by other analysts (such as Bhattacharya 2010). They pursued social rather than traditional marketing, partnerships with government, low cost/high volume services and cross-subsidization between different market segments. There was a lack of reliable data concerning these providers. There is very limited evidence to support the notion that large scale bottom of the pyramid models in health offer good prospects for extending services to the poor in the future. In order to be successful PFP providers often require partnerships with government or support from social health insurance schemes. Nonetheless, more reliable and independent data on such schemes is needed.

Private sector, for-profit health providers in low and middle income countries: can they reach the poor at scale?

PubMed Central

2014-01-01

Background The bottom of the pyramid concept suggests that profit can be made in providing goods and services to poor people, when high volume is combined with low margins. To-date there has been very limited empirical evidence from the health sector concerning the scope and potential for such bottom of the pyramid models. This paper analyzes private for-profit (PFP) providers currently offering services to the poor on a large scale, and assesses the future prospects of bottom of the pyramid models in health. Methods We searched published and grey literature and databases to identify PFP companies that provided more than 40,000 outpatient visits per year, or who covered 15% or more of a particular type of service in their country. For each included provider, we searched for additional information on location, target market, business model and performance, including quality of care. Results Only 10 large scale PFP providers were identified. The majority of these were in South Asia and most provided specialized services such as eye care. The characteristics of the business models of these firms were found to be similar to non-profit providers studied by other analysts (such as Bhattacharya 2010). They pursued social rather than traditional marketing, partnerships with government, low cost/high volume services and cross-subsidization between different market segments. There was a lack of reliable data concerning these providers. Conclusions There is very limited evidence to support the notion that large scale bottom of the pyramid models in health offer good prospects for extending services to the poor in the future. In order to be successful PFP providers often require partnerships with government or support from social health insurance schemes. Nonetheless, more reliable and independent data on such schemes is needed. PMID:24961496

A reliable and rapid tool for plasma quantification of 18 psychotropic drugs by ESI tandem mass spectrometry.

PubMed

Vecchione, Gennaro; Casetta, Bruno; Chiapparino, Antonella; Bertolino, Alessandro; Tomaiuolo, Michela; Cappucci, Filomena; Gatta, Raffaella; Margaglione, Maurizio; Grandone, Elvira

2012-01-01

A simple liquid chromatographic tandem mass spectrometry (LC-MS/MS) method has been developed for simultaneous analysis of 17 basic and one acid psychotropic drugs in human plasma. The method relies on a protein precipitation step for sample preparation and offers high sensitivity, wide linearity without interferences from endogenous matrix components. Chromatography was run on a reversed-phase column with an acetonitrile-H₂O mixture. The quantification of target compounds was performed in multiple reaction monitoring (MRM) and by switching the ionization polarity within the analytical run. A further sensitivity increase was obtained by implementing the functionality "scheduled multiple reaction monitoring" (sMRM) offered by the recent version of the software package managing the instrument. The overall injection interval was less than 5.5 min. Regression coefficients of the calibration curves and limits of quantification (LOQ) showed a good coverage of over-therapeutic, therapeutic and sub-therapeutic ranges. Recovery rates, measured as percentage of recovery of spiked plasma samples, were ≥ 94%. Precision and accuracy data have been satisfactory for a therapeutic drug monitoring (TDM) service as for managing plasma samples from patients receiving psycho-pharmacological treatment. Copyright © 2012 Elsevier B.V. All rights reserved.

The Role of Baked Egg and Milk in the Diets of Allergic Children.

PubMed

Robinson, Melissa L; Lanser, Bruce J

2018-02-01

Baked egg and baked milk are tolerated by most children who are allergic to hen's egg and cow's milk. Incorporating baked goods into the diets of allergic children may help them outgrow their primary allergy more quickly, with changes observed akin to immunotherapy. Benefits may also include increased quality of life and improved nutritional status. The search for a reliable biomarker to predict tolerance to baked goods is ongoing. Most children with a milk or egg allergy who are not previously tolerating egg or milk in baked goods should be offered an observed oral food challenge. Copyright © 2017 Elsevier Inc. All rights reserved.

Sociality as a Natural Mechanism of Public Goods Provision

PubMed Central

Berkman, Elliot T.; Lukinova, Evgeniya; Menshikov, Ivan; Myagkov, Mikhail

2015-01-01

In the recent literature, several hypotheses have been offered to explain patterns of human behavior in social environments. In particular, these patterns include ‘prosocial’ ones, such as fairness, cooperation, and collective good provision. Psychologists suggest that these prosocial behaviors are driven not by miscalculations, but by salience of social identity, in-group favoritism, emotion, or evolutionary adaptations. This paper imports psychology scholarship into an economic model and results in a sustainable solution to collective action problems without any external enforcement mechanisms. This natural mechanism of public goods provision is created, analyzed, and observed in a controlled laboratory environment using experimental techniques. PMID:25790099

Blended E-learning in a Web-based virtual hospital: a useful tool for undergraduate education in urology.

PubMed

Horstmann, M; Renninger, M; Hennenlotter, J; Horstmann, C C; Stenzl, A

2009-08-01

E-learning is a teaching tool used successfully in many medical subspecialties. Experience with its use in urology, however, is scarce. We present our teaching experience with the INMEDEA simulator to teach urological care to medical students. The INMEDEA simulator is an interactive e-learning system built around a virtual hospital which includes a department of urology. It allows students to solve virtual patient cases online. In this study, students were asked to prepare two urological cases prior to discussion of the cases in small groups. This blended teaching approach was evaluated by students through anonymous questionnaires. Of 70 4th year medical students 76% judged this teaching method as good or very good. Eighty-seven percent felt that it offered a good way to understand urological diseases better and 72% felt that learning with this method was fun. Nevertheless, 30 out of 70 free text statements revealed that further improvements of the program, including an easier and more comfortable navigation and a faster supply of information are necessary. Virtual patient cases offer a practicable solution for teaching based on problem solving in urology with a high acceptance rate by students.

Abiding by the sufficiency economy philosophy to develop the quality of life of teachers and educational personnel in the central region

NASA Astrophysics Data System (ADS)

Khumkhong, Tippawan

2018-01-01

This research aimed to 1) study the ideas and procedures of the Sufficiency Economy Philosophy (SEP) to make it fully implemented to develop the quality of life of teachers and educational personnel in the central region, 2) study the results of implementing the SEP and 3) offer some guidelines in implementing the SEP to develop the quality of life. The samples were the teachers and educational personnel, the cremation service welfare members of 2015 in 9 provinces of the central region namely Bangkok, Sing Buri, Saraburi, Chai Nat, Nonthaburi, Pathum Thani, Pha Nakhon Si Ayuttaya, Lop Buri and Ang Thong. The qualitative research's samples were the 6 key informants selected purposely, collected by depth-interview, analyzed using inductive method, checked by the methodological triangulation and the key informants. The quantitative research's samples were the 398 offered obtained by stratified random sampling having regard to the ratio, collected by questionnaire with the reliability value of 0.982, analyzed by percentage, mean and standard deviation. The findings were as follows: 1) As for the ideas towards the SEP and the ethical principles of Buddhism are one and the same thing. All levels of people can follow this philosophy. The procedures towards the SEP to develop the quality of life by performing in harmony with their daily lives regarding to the moderation, the reasonableness, building self-immunity with knowledge and ethical qualification. 2) The SEP helps develop the better quality of life, happiness, sound life, sound economy with great satisfaction of the living. 3) On offering some guidelines in implementing the SEP to develop the quality of life: 3.1) the performers must have good understanding in the philosophy and accept to bring it into use 3.2) lead a life according to the ethical principles of Buddhism or to the ones of the religion you believe. 3.3) members of the family had to cooperate in leading lives according to the SEP and 3.4) save money when having more than enough. 4) The teachers and educational personnel are able to implement the ideas offered at a high level.

Deliberation before determination: the definition and evaluation of good decision making.

PubMed

Elwyn, Glyn; Miron-Shatz, Talya

2010-06-01

In this article, we examine definitions of suggested approaches to measure the concept of good decisions, highlight the ways in which they converge, and explain why we have concerns about their emphasis on post-hoc estimations and post-decisional outcomes, their prescriptive concept of knowledge, and their lack of distinction between the process of deliberation, and the act of decision determination. There has been a steady trend to involve patients in decision making tasks in clinical practice, part of a shift away from paternalism towards the concept of informed choice. An increased understanding of the uncertainties that exist in medicine, arising from a weak evidence base and, in addition, the stochastic nature of outcomes at the individual level, have contributed to shifting the responsibility for decision making from physicians to patients. This led to increasing use of decision support and communication methods, with the ultimate aim of improving decision making by patients. Interest has therefore developed in attempting to define good decision making and in the development of measurement approaches. We pose and reflect whether decisions can be judged good or not, and, if so, how this goodness might be evaluated. We hypothesize that decisions cannot be measured by reference to their outcomes and offer an alternative means of assessment, which emphasizes the deliberation process rather than the decision's end results. We propose decision making comprises a pre-decisional process and an act of decision determination and consider how this model of decision making serves to develop a new approach to evaluating what constitutes a good decision making process. We proceed to offer an alternative, which parses decisions into the pre-decisional deliberation process, the act of determination and post-decisional outcomes. Evaluating the deliberation process, we propose, should comprise of a subjective sufficiency of knowledge, as well as emotional processing and affective forecasting of the alternatives. This should form the basis for a good act of determination.

Can Classification Tree Analyses Help Improve Decision Making About Treatments for Depression and Anxiety Disorders? A Preliminary Investigation

PubMed Central

Rhodes, Louisa; Naumann, Ulrike M.

2011-01-01

Objective: To identify how decisions about treatment are being made in secondary services for anxiety disorders and depression and, specifically, whether it was possible to predict the decisions to refer for evidence-based treatments. Method: Post hoc classification tree analysis was performed using a sample from an audit on implementation of the National Institute for Health and Clinical Excellence Guidelines for Depression and Anxiety Disorders. The audit was of 5 teams offering secondary care services; they included psychiatrists, psychologists, community psychiatric nurses, social workers, dual-diagnosis workers, and vocational workers. The patient sample included all of those with a primary problem of depression (n = 56) or an anxiety disorder (n = 16) who were offered treatment from February 16 to April 3, 2009. The outcome variable was whether or not evidence-based treatments were offered, and the predictor variables were presenting problem, risk, comorbid problem, social problems, and previous psychiatric history. Results: Treatment decisions could be more accurately predicted for anxiety disorders (93% correct) than for depression (55%). For anxiety disorders, the presence or absence of social problems was a good predictor for whether evidence-based or non–evidence-based treatments were offered; 44% (4/9) of those with social problems vs 100% (6/6) of those without social problems were offered evidence-based treatments. For depression, patients’ risk rating had the largest impact on treatment decisions, although no one variable could be identified as individually predictive of all treatment decisions. Conclusions: Treatment decisions were generally consistent for anxiety disorders but more idiosyncratic for depression, making the development of a decision-making model very difficult for depression. The lack of clarity of some terms in the clinical guidelines and the more complex nature of depression could be factors contributing to this difficulty. Further research is needed to understand the complex nature of decision making with depressed patients. PMID:22295255

Gestalt Theory and Instructional Design.

ERIC Educational Resources Information Center

Moore, Patrick; Fitz, Chad

1993-01-01

Offers a brief overview of Gestalt theory. Shows how six Gestalt principles (proximity, closure, symmetry, figure-ground segregation, good continuation, and similarity) can be applied to improve a reader's comprehension of a badly designed instruction module that uses several graphics. (SR)

Utah Marbles and Mars Blueberries: Comparitive Terrestrial Analogs for Hematite Concretions on Mars

NASA Astrophysics Data System (ADS)

Chan, M. A.; Beitler, B.; Parry, W. T.; Ormö, J.; Komatsu, G.

2005-03-01

Compelling comparisons show why Utah iron oxide-cemented "marbles" are a good analog for Mars hematite "blueberries". Terrestrial examples offer valuable models for interpreting the diagenetic history and importance of water on Mars.

Our Culture/Your Good Intentions (Reflections).

ERIC Educational Resources Information Center

Hewett, Kerri-Ann

1996-01-01

Offers a Native Hawaiian educator's perspective on the well- intentioned but misguided efforts of many non-Native teachers, administrators, and professors. Uses the Kamehameha Early Education Program as an example of an authoritarian discourse being taught to Native children. (SR)

17 CFR 201.201 - Consolidation and severance of proceedings.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., proceedings involving a common question of law or fact may be consolidated for hearing of any or all the... offer is pending before the Commission or otherwise show good cause. [60 FR 32796, June 23, 1995, as...

17 CFR 201.201 - Consolidation and severance of proceedings.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., proceedings involving a common question of law or fact may be consolidated for hearing of any or all the... offer is pending before the Commission or otherwise show good cause. [60 FR 32796, June 23, 1995, as...

Children of Divorce: Mending Broken Hearts.

ERIC Educational Resources Information Center

Beck, Irene C.

1991-01-01

Examines important issues for parents to consider when dealing with children of divorce and discusses several problem points to avoid, including loyalty conflicts, good parent/evil parent, family secrets, and feeling cheated. Several suggestions for helping children cope are offered. (SM)

Elpasolite Planetary Ice and Composition Spectrometer (EPICS): A Low-Resource Combined Gamma-Ray and Neutron Spectrometer for Planetary Science

NASA Astrophysics Data System (ADS)

Stonehill, L. C.; Coupland, D. D. S.; Dallmann, N. A.; Feldman, W. C.; Mesick, K.; Nowicki, S.; Storms, S.

2017-12-01

The Elpasolite Planetary Ice and Composition Spectrometer (EPICS) is an innovative, low-resource gamma-ray and neutron spectrometer for planetary science missions, enabled by new scintillator and photodetector technologies. Neutrons and gamma rays are produced by cosmic ray interactions with planetary bodies and their subsequent interactions with the near-surface materials produce distinctive energy spectra. Measuring these spectra reveals details of the planetary near-surface composition that are not accessible through any other phenomenology. EPICS will be the first planetary science instrument to fully integrate the neutron and gamma-ray spectrometers. This integration is enabled by the elpasolite family of scintillators that offer gamma-ray spectroscopy energy resolutions as good as 3% FWHM at 662 keV, thermal neutron sensitivity, and the ability to distinguish gamma-ray and neutron signals via pulse shape differences. This new detection technology will significantly reduce size, weight, and power (SWaP) while providing similar neutron performance and improved gamma energy resolution compared to previous scintillator instruments, and the ability to monitor the cosmic-ray source term. EPICS will detect scintillation light with silicon photomultipliers rather than traditional photomultiplier tubes, offering dramatic additional SWaP reduction. EPICS is under development with Los Alamos National Laboratory internal research and development funding. Here we report on the EPICS design, provide an update on the current status of the EPICS development, and discuss the expected sensitivity and performance of EPICS in several potential missions to airless bodies.

Towards a theory of individual differences in statistical learning

PubMed Central

Bogaerts, Louisa; Christiansen, Morten H.; Frost, Ram

2017-01-01

In recent years, statistical learning (SL) research has seen a growing interest in tracking individual performance in SL tasks, mainly as a predictor of linguistic abilities. We review studies from this line of research and outline three presuppositions underlying the experimental approach they employ: (i) that SL is a unified theoretical construct; (ii) that current SL tasks are interchangeable, and equally valid for assessing SL ability; and (iii) that performance in the standard forced-choice test in the task is a good proxy of SL ability. We argue that these three critical presuppositions are subject to a number of theoretical and empirical issues. First, SL shows patterns of modality- and informational-specificity, suggesting that SL cannot be treated as a unified construct. Second, different SL tasks may tap into separate sub-components of SL that are not necessarily interchangeable. Third, the commonly used forced-choice tests in most SL tasks are subject to inherent limitations and confounds. As a first step, we offer a methodological approach that explicitly spells out a potential set of different SL dimensions, allowing for better transparency in choosing a specific SL task as a predictor of a given linguistic outcome. We then offer possible methodological solutions for better tracking and measuring SL ability. Taken together, these discussions provide a novel theoretical and methodological approach for assessing individual differences in SL, with clear testable predictions. This article is part of the themed issue ‘New frontiers for statistical learning in the cognitive sciences’. PMID:27872377

Phenomenology in nursing research: methodology, interviewing and transcribing.

PubMed

Balls, Paula

While nurses can relate to the phenomenological approach because they see it as sharing the values of nursing, this may not be sufficient on its own to start conducting this kind of research. Using examples from my own research experience, this article aims to examine what draws nursing to this method and why nurses think they may be good at it. It also offers practical advice on how to carry out a good interview, how and what to transcribe and how to use quotes to support research.

[The treatment of patients with traumatic osteomyelitis of the mandible by using porous permeable titanium nickelide implants].

PubMed

Tazin, I D; Sysoliatin, P G; Panov, L A; Giunter, V E

2000-01-01

Use of titanium nickelide based porous permeable implants for repair of postosteomyelitis mandibular defects is discussed. Five patients with mandibular defects of different location and extent were operated on. Surgical methods are described. A clinical example of using a porous permeable implant is offered. The implant designed as a mandible was used for repair of an extensive mandibular defect. Good immediate and remote results of operations indicate good prospects of using such implants.

The Flexible Fairness: Equality, Earned Entitlement, and Self-Interest

PubMed Central

Gu, Ruolei; Broster, Lucas S.; Shen, Xueyi; Tian, Tengxiang; Luo, Yue-Jia; Krueger, Frank

2013-01-01

The current study explored whether earned entitlement modulated the perception of fairness in three experiments. A preliminary resource earning task was added before players decided how to allocate the resource they jointly earned. Participants’ decision in allocation, their responses to equal or unequal offers, whether advantageous or disadvantageous, and subjective ratings of fairness were all assessed in the current study. Behavioral results revealed that participants proposed more generous offers and showed enhanced tolerance to disadvantageous unequal offers from others when they performed worse than their presumed “partners,” while the reverse was true in the better-performance condition. The subjective ratings also indicated the effect of earned entitlement, such that worse performance was associated with higher perceived feelings of fairness for disadvantageous unequal offers, while better performance was associated with higher feelings of fairness for advantageous unequal offers. Equal offers were considered “fair” only when earned entitlement was even between two parties. In sum, the perception of fairness is modulated by an integration of egalitarian motivation and entitlement. In addition to justice principles, participants were also motivated by self-interest, such that participants placed more weight on entitlement in the better-performance condition than in the worse-performance condition. These results imply that earned entitlement is evaluated in a self-serving way. PMID:24039867

Listening and Learning in a Master Class

ERIC Educational Resources Information Center

Hanken, Ingrid Maria

2015-01-01

Most higher education institutions offering programmes in music performance organise master classes for their students. It is commonly agreed that master classes offer valuable learning opportunities for the students performing, but what do they offer for students in the audience? In this article, theories of learning by observation as well as…

Welcome to the experience economy.

PubMed

Pine, B J; Gilmore, J H

1998-01-01

First there was agriculture, then manufactured goods, and eventually services. Each change represented a step up in economic value--a way for producers to distinguish their products from increasingly undifferentiated competitive offerings. Now, as services are in their turn becoming commoditized, companies are looking for the next higher value in an economic offering. Leading-edge companies are finding that it lies in staging experiences. To reach this higher level of competition, companies will have to learn how to design, sell, and deliver experiences that customers will readily pay for. An experience occurs when a company uses services as the stage--and goods as props--for engaging individuals in a way that creates a memorable event. And while experiences have always been at the heart of the entertainment business, any company stages an experience when it engages customers in a personal, memorable way. The lessons of pioneering experience providers, including the Walt Disney Company, can help companies learn how to compete in the experience economy. The authors offer five design principles that drive the creation of memorable experiences. First, create a consistent theme, one that resonates throughout the entire experience. Second, layer the theme with positive cues--for example, easy-to-follow signs. Third, eliminate negative cues, those visual or aural messages that distract or contradict the theme. Fourth, offer memorabilia that commemorate the experience for the user. Finally, engage all five senses--through sights, sounds, and so on--to heighten the experience and thus make it more memorable.

Oblique metatarsal osteotomy for intractable plantar keratosis: 10-year follow-up.

PubMed

Idusuyi, O B; Kitaoka, H B; Patzer, G L

1998-06-01

Twenty patients (14 women and 6 men) (23 feet) had a single oblique osteotomy operation of the 2nd, 3rd, or 4th metatarsal without fixation during an 8-year period. The mean age was 46 years (range, 21-64 years). Each patient had a painful intractable plantar keratosis preoperatively. The average follow-up was 10 years (range, 3-14 years). Postoperatively, reoperation was performed in four feet because of painful callosities. For 13 of the 19 feet that did not have reoperation, patients were limited in footwear or required a shoe insert. Overall results were good for 10 feet, fair for 7 feet, and poor for 6 feet. The only complication was a deep infection that occurred in one foot (good result). Nonunion occurred in one foot and delayed union in one. The average decrease in metatarsal length after osteotomy was 6+/-6 mm. The single oblique lesser metatarsal osteotomy may be successful, but one half of the patients continued to have some degree of pain and most patients had limitations in footwear. Overall results were disappointing, and patients who are offered this procedure should be advised of its limitations.

Microbiological quality and safe handling of enteral diets in a hospital in Minas Gerais, Brazil.

PubMed

Pinto, Raquel Oliveira Medrado; Correia, Eliznara Fernades; Pereira, Keyla Carvalho; Costa Sobrinho, Paulo de Souza; da Silva, Daniele Ferreira

2015-06-01

Contamination of enteral diets represents a high risk of compromising the patient's medical condition. To assess the microbiological quality and aseptic conditions in the preparation and administration of handmade and industrialized enteral diets offered in a hospital in the Valley of Jequitinhonha, MG, Brazil, we performed a microbiological analysis of 50 samples of diets and 27 samples of surfaces, utensils, and water used in the preparation of the diets. In addition, we assessed the good handling practices of enteral diets according to the requirements specified by the Brazilian legislation. Both kinds of enteral diets showed contamination by coliforms and Pseudomonas spp. No sample was positive for Staphylococcus aureus and Salmonella spp. On the other hand, Listeria spp. was detected in only one sample of handmade diets. Contamination was significantly higher in the handmade preparations (p < 0.05). Nonconformities were detected with respect to good handling practices, which may compromise the diet safety. The results indicate that the sanitary quality of the enteral diets is unsatisfactory, especially handmade diets. Contamination by Pseudomonas spp. is significant because it is often involved in infection episodes. With regard to aseptic practices, it was observed the need of implementing new procedures for handling enteral diets.

Sensitivity and specificity of monochromatic photography of the ocular fundus in differentiating optic nerve head drusen and optic disc oedema: optic disc drusen and oedema.

PubMed

Gili, Pablo; Flores-Rodríguez, Patricia; Yangüela, Julio; Orduña-Azcona, Javier; Martín-Ríos, María Dolores

2013-03-01

Evaluation of the efficacy of monochromatic photography of the ocular fundus in differentiating optic nerve head drusen (ONHD) and optic disc oedema (ODE). Sixty-six patients with ONHD, 31 patients with ODE and 70 healthy subjects were studied. Colour and monochromatic fundus photography with different filters (green, red and autofluorescence) were performed. The results were analysed blindly by two observers. The sensitivity, specificity and interobserver agreement (k) of each test were assessed. Colour photography offers 65.5 % sensitivity and 100 % specificity for the diagnosis of ONHD. Monochromatic photography improves sensitivity and specificity and provides similar results: green filter (71.20 % sensitivity, 96.70 % specificity), red filter (80.30 % sensitivity, 96.80 % specificity), and autofluorescence technique (87.8 % sensitivity, 100 % specificity). The interobserver agreement was good with all techniques used: autofluorescence (k = 0.957), green filter (k = 0.897), red filter (k = 0.818) and colour (k = 0.809). Monochromatic fundus photography permits ONHD and ODE to be differentiated, with good sensitivity and very high specificity. The best results were obtained with autofluorescence and red filter study.

Sleep health: can we define it? Does it matter?

PubMed

Buysse, Daniel J

2014-01-01

Good sleep is essential to good health. Yet for most of its history, sleep medicine has focused on the definition, identification, and treatment of sleep problems. Sleep health is a term that is infrequently used and even less frequently defined. It is time for us to change this. Indeed, pressures in the research, clinical, and regulatory environments require that we do so. The health of populations is increasingly defined by positive attributes such as wellness, performance, and adaptation, and not merely by the absence of disease. Sleep health can be defined in such terms. Empirical data demonstrate several dimensions of sleep that are related to health outcomes, and that can be measured with self-report and objective methods. One suggested definition of sleep health and a description of self-report items for measuring it are provided as examples. The concept of sleep health synergizes with other health care agendas, such as empowering individuals and communities, improving population health, and reducing health care costs. Promoting sleep health also offers the field of sleep medicine new research and clinical opportunities. In this sense, defining sleep health is vital not only to the health of populations and individuals, but also to the health of sleep medicine itself.

A Deep Learning Approach to Digitally Stain Optical Coherence Tomography Images of the Optic Nerve Head.

PubMed

Devalla, Sripad Krishna; Chin, Khai Sing; Mari, Jean-Martial; Tun, Tin A; Strouthidis, Nicholas G; Aung, Tin; Thiéry, Alexandre H; Girard, Michaël J A

2018-01-01

To develop a deep learning approach to digitally stain optical coherence tomography (OCT) images of the optic nerve head (ONH). A horizontal B-scan was acquired through the center of the ONH using OCT (Spectralis) for one eye of each of 100 subjects (40 healthy and 60 glaucoma). All images were enhanced using adaptive compensation. A custom deep learning network was then designed and trained with the compensated images to digitally stain (i.e., highlight) six tissue layers of the ONH. The accuracy of our algorithm was assessed (against manual segmentations) using the dice coefficient, sensitivity, specificity, intersection over union (IU), and accuracy. We studied the effect of compensation, number of training images, and performance comparison between glaucoma and healthy subjects. For images it had not yet assessed, our algorithm was able to digitally stain the retinal nerve fiber layer + prelamina, the RPE, all other retinal layers, the choroid, and the peripapillary sclera and lamina cribrosa. For all tissues, the dice coefficient, sensitivity, specificity, IU, and accuracy (mean) were 0.84 ± 0.03, 0.92 ± 0.03, 0.99 ± 0.00, 0.89 ± 0.03, and 0.94 ± 0.02, respectively. Our algorithm performed significantly better when compensated images were used for training (P < 0.001). Besides offering a good reliability, digital staining also performed well on OCT images of both glaucoma and healthy individuals. Our deep learning algorithm can simultaneously stain the neural and connective tissues of the ONH, offering a framework to automatically measure multiple key structural parameters of the ONH that may be critical to improve glaucoma management.

A Lymph Node Staging System for Gastric Cancer: A Hybrid Type Based on Topographic and Numeric Systems.

PubMed

Choi, Yoon Young; An, Ji Yeong; Katai, Hitoshi; Seto, Yasuyuki; Fukagawa, Takeo; Okumura, Yasuhiro; Kim, Dong Wook; Kim, Hyoung-Il; Cheong, Jae-Ho; Hyung, Woo Jin; Noh, Sung Hoon

2016-01-01

Although changing a lymph node staging system from an anatomically based system to a numerically based system in gastric cancer offers better prognostic performance, several problems can arise: it does not offer information on the anatomical extent of disease and cannot represent the extent of lymph node dissection. The purpose of this study was to discover an alternative lymph node staging system for gastric cancer. Data from 6025 patients who underwent gastrectomy for primary gastric cancer between January 2000 and December 2010 were reviewed. The lymph node groups were reclassified into lesser-curvature, greater-curvature, and extra-perigastric groups. Presence of any metastatic lymph node in one group was considered positive. Lymph node groups were further stratified into four (new N0-new N3) according to the number of positive lymph node groups. Survival outcomes with this new N staging were compared with those of the current TNM system. For validation, two centers in Japan (large center, n = 3443; medium center, n = 560) were invited. Even among the same pN stages, the more advanced new N stage showed worse prognosis, indicating that the anatomical extent of metastatic lymph nodes is important. The prognostic performance of the new staging system was as good as that of the current TNM system for overall advanced gastric cancer as well as lymph node-positive gastric cancer (Harrell C-index was 0.799, 0.726, and 0.703 in current TNM and 0.799, 0.727, and 0.703 in new TNM stage). Validation sets supported these outcomes. The new N staging system demonstrated prognostic performance equal to that of the current TNM system and could thus be used as an alternative.

A novel, colorimetric method for biogenic amine detection based on arylalkylamine N-acetyltransferase.

PubMed

Leng, Pei-Qiang; Zhao, Feng-Lan; Yin, Bin-Cheng; Ye, Bang-Ce

2015-05-21

We developed a novel colorimetric method for rapid detection of biogenic amines based on arylalkylamine N-acetyltransferase (aaNAT). The proposed method offers distinct advantages including simple handling, high speed, low cost, good sensitivity and selectivity.

Needing a Second Chance.

ERIC Educational Resources Information Center

Hargrave, Lou Ann

2003-01-01

Temporary Assistance to Needy Families offers welfare recipients a second chance for success. How good that chance will be depends on the next version of the legislation. If its work requirements do not allow for sufficient training, achieving success may be more difficult. (Author/JOW)

20 CFR 639.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., supply a service or good on a mercantile basis, or provide independent management of public assets...' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR WORKER ADJUSTMENT AND RETRAINING... offers to transfer the employee to a different site of employment within a reasonable commuting distance...

Tips for Good Electronic Presentations.

ERIC Educational Resources Information Center

Strasser, Dennis

1996-01-01

Describes library uses of presentation graphics software and offers tips for creating electronic presentations. Tips include: audience retention; visual aid options; software package options; presentation planning; presentation showing; and use of text, colors, and graphics. Sidebars note common presentation errors and popular presentation…

Maintaining Your Threads.

ERIC Educational Resources Information Center

Delack, Renee J.

1996-01-01

Describes how keeping carpets in good condition depends not only on proper maintenance but also on careful carpet selection at the outset. Offers advice for restoring a carpet's new appearance through vacuuming and hot-water extraction and suggests ways to manage spots and stains. (RJM)

JPRS Report China

DTIC Science & Technology

1990-02-21

in the case of the labor-intensive industries and trades such as art craft, embroidery , sewing and knitting, the opportunities offered are good for...Its agricultural production has the name of " embroidery agriculture." Because of the insufficient attention given agriculture during the past several

Balancing Act.

ERIC Educational Resources Information Center

Van Wagner, Lisa R.

2001-01-01

By offering healthy fare and providing nutrition education, school districts across the country are trying to lessen problems of childhood obesity while selling food that kids will eat. Luckily, chicken nuggets and other "fast foods" can taste just as good when made with less fat. (MLH)

On Self-Esteem.

ERIC Educational Resources Information Center

Lewis, Florence C.

1988-01-01

Good teachers are treasures, but they need rewards and small classes. They cannot instruct others in self-esteem if they feel like losers. If the teaching profession is scorned and the school administration offers no support, the teacher can be only poison in the classroom. (MLW)

Evolution of Fairness in the Not Quite Ultimatum Game

NASA Astrophysics Data System (ADS)

Ichinose, Genki; Sayama, Hiroki

2014-05-01

The Ultimatum Game (UG) is an economic game where two players (proposer and responder) decide how to split a certain amount of money. While traditional economic theories based on rational decision making predict that the proposer should make a minimal offer and the responder should accept it, human subjects tend to behave more fairly in UG. Previous studies suggested that extra information such as reputation, empathy, or spatial structure is needed for fairness to evolve in UG. Here we show that fairness can evolve without additional information if players make decisions probabilistically and may continue interactions when the offer is rejected, which we call the Not Quite Ultimatum Game (NQUG). Evolutionary simulations of NQUG showed that the probabilistic decision making contributes to the increase of proposers' offer amounts to avoid rejection, while the repetition of the game works to responders' advantage because they can wait until a good offer comes. These simple extensions greatly promote evolution of fairness in both proposers' offers and responders' acceptance thresholds.

Evaluating Security Controls Based on Key Performance Indicators and Stakeholder Mission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheldon, Frederick T; Abercrombie, Robert K; Mili, Ali

2008-01-01

Good security metrics are required to make good decisions about how to design security countermeasures, to choose between alternative security architectures, and to improve security during operations. Therefore, in essence, measurement can be viewed as a decision aid. The lack of sound practical security metrics is severely hampering progress in the development of secure systems. The Cyberspace Security Econometrics System (CSES) offers the following advantages over traditional measurement systems: (1) CSES reflects the variances that exist amongst different stakeholders of the same system. Different stakeholders will typically attach different stakes to the same requirement or service (e.g., a service maymore » be provided by an information technology system or process control system, etc.). (2) For a given stakeholder, CSES reflects the variance that may exist among the stakes she/he attaches to meeting each requirement. The same stakeholder may attach different stakes to satisfying different requirements within the overall system specification. (3) For a given compound specification (e.g., combination(s) of commercial off the shelf software and/or hardware), CSES reflects the variance that may exist amongst the levels of verification and validation (i.e., certification) performed on components of the specification. The certification activity may produce higher levels of assurance across different components of the specification than others. Consequently, this paper introduces the basis, objectives and capabilities for the CSES including inputs/outputs and the basic structural and mathematical underpinnings.« less

A new high-performance thin-layer chromatographic method for determining bile salt hydrolase activity.

PubMed

Rohawi, Nur Syakila; Ramasamy, Kalavathy; Agatonovic-Kustrin, Snezana; Lim, Siong Meng

2018-06-05

A quantitative assay using high-performance thin-layer chromatography (HPTLC) was developed to investigate bile salt hydrolase (BSH) activity in Pediococcus pentosaceus LAB6 and Lactobacillus plantarum LAB12 probiotic bacteria isolated from Malaysian fermented food. Lactic acid bacteria (LAB) were cultured in de Man Rogosa and Sharpe (MRS) broth containing 1 mmol/L of sodium-based glyco- and tauro-conjugated bile salts for 24 h. The cultures were centrifuged and the resultant cell free supernatant was subjected to chromatographic separation on a HPTLC plate. Conjugated bile salts were quantified by densitometric scans at 550 nm and results were compared to digital image analysis of chromatographic plates after derivatisation with anisaldehyde/sulfuric acid. Standard curves for bile salts determination with both methods show good linearity with high coefficient of determination (R 2 ) between 0.97 and 0.99. Method validation indicates good sensitivity with low relative standard deviation (RSD) (<10%), low limits of detection (LOD) of 0.4 versus 0.2 μg and limit of quantification (LOQ) of 1.4 versus 0.7 μg, for densitometric vs digital image analysis method, respectively. The bile salt hydrolase activity was found to be higher against glyco- than tauro-conjugated bile salts (LAB6; 100% vs >38%: LAB12; 100% vs >75%). The present findings strongly show that quantitative analysis via digitally-enhanced HPTLC offers a rapid quantitative analysis for deconjugation of bile salts by probiotics. Copyright © 2018. Published by Elsevier B.V.

Fatigue Life Methodology for Bonded Composite Skin/Stringer Configurations

NASA Technical Reports Server (NTRS)

Krueger, Ronald; Paris, Isabelle L.; OBrien, T. Kevin; Minguet, Pierre J.

2001-01-01

A methodology is presented for determining the fatigue life of composite structures based on fatigue characterization data and geometric nonlinear finite element (FE) analyses. To demonstrate the approach, predicted results were compared to fatigue tests performed on specimens which represented a tapered composite flange bonded onto a composite skin. In a first step, tension tests were performed to evaluate the debonding mechanisms between the flange and the skin. In a second step, a 2D FE model was developed to analyze the tests. To predict matrix cracking onset, the relationship between the tension load and the maximum principal stresses transverse to the fiber direction was determined through FE analysis. Transverse tension fatigue life data were used to -enerate an onset fatigue life P-N curve for matrix cracking. The resulting prediction was in good agreement with data from the fatigue tests. In a third step, a fracture mechanics approach based on FE analysis was used to determine the relationship between the tension load and the critical energy release rate. Mixed mode energy release rate fatigue life data were used to create a fatigue life onset G-N curve for delamination. The resulting prediction was in good agreement with data from the fatigue tests. Further, the prediction curve for cumulative life to failure was generated from the previous onset fatigue life curves. The results showed that the methodology offers a significant potential to Predict cumulative fatigue life of composite structures.

Take a Deep Dive With DAU: The Kind We Offer Is Safe and Sure to Keep You Dry

DTIC Science & Technology

2017-01-01

organic, on-the-job training program waned or become ineffective? DAU uses a highly interactive work- shop venue in which our customers use their own...Future. DAU continuously seeks customer feedback on the efficacy of MA. We need to know if we got it right, good or bad—and what changes might be...41 Defense AT&L: January–February 2017 Take a Deep Dive With DAU The Kind We Offer Is Safe and Sure to Keep You Dry Woody Spring n Rebecca Haydu

Is a comparative clinical trial for breast cancer tumor markers to monitor disease recurrence warranted? A value of information analysis

PubMed Central

Thariani, Rahber; Henry, Norah Lynn; Ramsey, Scott D; Blough, David K; Barlow, Bill; Gralow, Julie R; Veenstra, David L

2014-01-01

Background Breast cancer tumor markers are used by some clinicians to screen for disease recurrence risk. Since there is limited evidence of benefit, additional research may be warranted. Aim To assess the potential value of a randomized clinical trial of breast tumor marker testing in routine follow-up of high-risk, stage II–III breast cancer survivors. Materials & methods We developed a decision-analytic model of tumor marker testing plus standard surveillance every 3–6 months for 5 years. The expected value of sample information was calculated using probabilistic simulations and was a function of: the probability of selecting the optimal monitoring strategy with current versus future information; the impact of choosing the nonoptimal strategy; and the size of the population affected. Results The value of information for a randomized clinical trial involving 9000 women was US$214 million compared with a cost of US$30–60 million to conduct such a trial. The probability of making an alternate, nonoptimal decision and choosing testing versus no testing was 32% with current versus future information from the trial. The impact of a nonoptimal decision was US$2150 and size of population impacted over 10 years was 308,000. The value of improved information on overall survival was US$105 million, quality of life US$37 million and test performance US$71 million. Conclusion Conducting a randomized clinical trial of breast cancer tumor markers appears to offer a good societal return on investment. Retrospective analyses to assess test performance and evaluation of patient quality of life using tumor markers may also offer valuable areas of research. However, alternative investments may offer even better returns in investments and, as such, the trial concept deserves further study as part of an overall research-portfolio evaluation. PMID:24236631

Integration: For or Against?

ERIC Educational Resources Information Center

Veblen, Kari K.; Elliott, David J.

2000-01-01

Argues in support of integrating music education with other subject areas, discussing the importance of maintaining music's integrity, combining the arts, reasons for integration, and whether integration is always good. Offers an opposing argument that views the integration of music with other subject areas as unsound. (CMK)

Recent Improvements To the Sieve of Eratosthenes.

ERIC Educational Resources Information Center

Quesada, Antonio R.

1997-01-01

Presents recently developed generalizations to the sieve of Eratosthenes, showing the principles underlying these improvements, which increase its efficiency without changing too much of its simplicity. Offers several possibilities to propose good investigations for students to explore, find patterns, and make generalizations. (JRH)

Skill Development in Experimental Courses

ERIC Educational Resources Information Center

Bagán, Héctor; Sayós, Rosa; García, José F.

2015-01-01

Experimental courses offer a good opportunity to work with competences, promoting the incorporation of strategies oriented towards motivating students to actively involve in the learning process, promoting reflexive learning and developing generic skills. This study presents different ways of developing and evaluating some important general…

Electric Company Critique: Can Great Be Good Enough?

ERIC Educational Resources Information Center

Roser, Nancy L.

1974-01-01

Offers specific examples of instructional goals and their corresponding teaching techniques used in "The Electric Company" that do not substantiate the definition of reading as communication between author and reader, the effective reader being one who brings meaning to the printed word. (TO)

Advising Undergraduates in a Department of Soil Science and/or Agronomy.

ERIC Educational Resources Information Center

Lee, Gerhard B.

1987-01-01

Offers suggestions to advisers of undergraduate students in agriculture. Recommends that advisers be competent, concerned, compassionate, and provide an open-door attitude toward their advisees. Suggests that students be guided toward good study habits and participation in intern programs. (TW)

Medical Research for All Americans

MedlinePlus

... we want to offer you and your family good, helpful health information that is based on the very best medical research conducted by and for the National Institutes of Health (NIH). This issue focuses on several topics in which NIH-funded research continues to make ...

Teaching Civics.

ERIC Educational Resources Information Center

Holmes, Madelyn, Ed.

1998-01-01

The goal of civic education should be to develop competent, responsible citizens whose words and actions uphold and enrich the constitutional democracy of the United States. Being a good citizen requires proper knowledge, skills, and dispositions. This forum offers five articles: (1) "Educating Responsible Citizens" (Ivor Pritchard;…

Development and preliminary validation of the EASE: a tool to measure perceived singing voice function.

PubMed

Phyland, Debra J; Pallant, Julie F; Benninger, Michael S; Thibeault, Susan L; Greenwood, Ken M; Smith, Julian A; Vallance, Neil

2013-07-01

Most voice self-rating tools are disease-specific measures and are not suitable for use with healthy voice users. There is a need for a tool that is sensitive to the subtleties of a singer's voice and to perceived physical changes in the singing voice mechanism as a function of load. The aim of this study was to devise and validate a scale to assess singer's perceptions of the current status of their singing voice. Ninety-five vocal health descriptors were collected from focus group interviews of singers. These were reviewed by 25 currently performing music theater (MT) singers. Based on a consensus technique, the number of descriptors was decreased to 42 items. These were administered to a sample of 284 professional MT singers using an online survey to evaluate their perception of current singing voice status. Principal component analysis identified two subsets of items. Rasch analysis was used to evaluate and refine these sets of items to form two 10-item subscales. Both subscales demonstrated good overall fit to the Rasch model, no differential item functioning by sex or age, and good internal consistency reliability. The two subscales were strongly correlated and subsequent Rasch analysis supported their combination to form a single 20-item scale with good psychometric properties. The Evaluation of the Ability to Sing Easily (EASE) is a concise clinical tool to assess singer's perceptions of the current status of their singing voice with good measurement properties. EASE may prove a useful tool to measure changes in the singing voice as indicators of the effect of vocal load. Furthermore, it may offer a valuable means for the prediction or screening of singers "at risk" of developing voice disorders. Copyright © 2013 The Voice Foundation. All rights reserved.

[Leadership seminars: what are they good for?].

PubMed

Schubert, P

2010-08-01

Professional training courses are a matter of course for any surgeon who wants to offer the best and most up-to-date treatment to patients. But after leaving the operating room surgeons will be confronted with issues that demand more than surgical skills. As a leader of a team the expectations and needs of the people under his care and of the managers above him need to be faced. Leadership seminars are an opportunity to become aware of these and to learn how to competently react to them. They can offer support on many levels: what type of leader am I? How do I appear to others? What do my employees/superiors expect from me? How can I manage my staff, not least in terms of reaching the goals of my department or the company? Which leadership tools are there and how can I use them? Good leadership seminars can be recognized by the balance of different aspects which they cover: they offer new expertise as well as opportunities for reflecting on one's personality and everyday work and introduce new approaches with an immediate opportunity for practicing them effectively. The key is that managers monitor their progress continuously and ideally continue to develop themselves further throughout their working life.

[Portal hypertension. Evidence-based guide].

PubMed

Mercado, Miguel Angel; Orozco Zepeda, Héctor; Plata-Muñoz, Juan José

2004-01-01

Treatment of portal hypertension has evolved widely during the last decades. Advances in physiopathology have allowed better application of therapeutic options and also have permitted to know the natural history of varices and variceal bleeding, predicting which patients have a higher risk of bleeding. It also permits probability of designing patient treatment. According to liver function and subadjacent liver disease, it is possible to offer different alternatives within the three possible scenarios (primary prophylaxis, acute bleeding episode, and secondary prophylaxis). For primary prophylaxis, pharmacotherapy offers the best choice. Endoscopic banding is also growing in these scenarios and probably will be accepted in the near future. For the acute bleeding episode, endoscopic therapy (sclerosis and/or bands) and/or pharmacologic therapy (octreotide, terlipresin) represent best choice, considering TIPS as a rescue option. Surgery is not used routinely in this scenario in most centers. For secondary prophylaxis, pharmaco- and endoscopic therapy are first-line treatments, while TIPS and surgery as second-line treatments. TIPS is mainly used in patients on a waiting list for liver transplantation. Surgery offers good results for low-risk patients, with good liver function and with portal blood-flow preserving procedures (selective shunts, extensive devascularizations). Liver transplantation is recommended for patients with poor liver function because together with portal hypertension, it treats subadjacent liver disease.

How to make rural jobs more attractive to health workers. Findings from a discrete choice experiment in Tanzania.

PubMed

Kolstad, Julie Riise

2011-02-01

The geographical imbalance of the health workforce in Tanzania represents a serious problem when it comes to delivering crucial health services to a large share of the population. This study provides new quantitative information about how to make jobs in rural areas more attractive to newly educated clinical officers (COs). A unique data set stemming from a discrete choice experiment with CO finalists in Tanzania is applied. The results show that offering continuing education after a certain period of service is one of the most powerful recruitment instruments the authorities have available. Increased salaries and hardship allowances will also substantially increase recruitment in rural areas. Offers of decent housing and good infrastructure, including the provision of equipment, will increase recruitment to rural remote areas but not as much as higher wages and offers of education. Women are less responsive to pecuniary incentives and are more concerned with factors that directly allow them to do a good job, while those with parents living in a remote rural area are generally less responsive to the proposed policies. When the willingness to help other people is a strong motivating force, policies that improve the conditions for helping people appear particularly effective.

Clinical Evaluation of Functional Vision of +1.5 Diopters near Addition, Aspheric, Rotational Asymmetric Multifocal Intraocular Lens

PubMed Central

Khoramnia, Rahmin; Attia, Mary Safwat; Koss, Michael Janusz; Linz, Katharina; Auffarth, Gerd Uwe

2016-01-01

Purpose To evaluate postoperative outcomes and visual performance in intermediate distance after implantation of a +1.5 diopters (D) addition, aspheric, rotational asymmetric multifocal intraocular lens (MIOL). Methods Patients underwent bilateral cataract surgery with implantation of an aspheric, asymmetric MIOL with +1.5 D near addition. A complete ophthalmological examination was performed preoperatively and 3 months postoperatively. The main outcome measures were monocular and binocular uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), uncorrected intermediate visual acuity (UIVA), distance corrected intermediate visual acuity (DCIVA), uncorrected near visual acuity (UNVA) and distance corrected keratometry, and manifest refraction. The Salzburg Reading Desk was used to analyze unilateral and bilateral functional vision with uncorrected and corrected reading acuity, reading distance, reading speed, and the smallest log-scaled print size that could be read effectively at near and intermediate distances. Results The study comprised 60 eyes of 30 patients (mean age, 68.30 ± 9.26 years; range, 34 to 80 years). There was significant improvement in UDVA and CDVA. Mean UIVA was 0.01 ± 0.09 logarithm of the minimum angle of resolution (logMAR) and mean DCIVA was -0.02 ± 0.11 logMAR. In Salzburg Reading Desk analysis for UIVA, the mean subjective intermediate distance was 67.58 ± 8.59 cm with mean UIVA of -0.02 ± 0.09 logMAR and mean word count of 96.38 ± 28.32 words/min. Conclusions The new aspheric, asymmetric, +1.5 D near addition MIOL offers good results for distance visual function in combination with good performance for intermediate distances and functional results for near distance. PMID:27729759

Clinical Evaluation of Functional Vision of +1.5 Diopters near Addition, Aspheric, Rotational Asymmetric Multifocal Intraocular Lens.

PubMed

Kretz, Florian Tobias Alwin; Khoramnia, Rahmin; Attia, Mary Safwat; Koss, Michael Janusz; Linz, Katharina; Auffarth, Gerd Uwe

2016-10-01

To evaluate postoperative outcomes and visual performance in intermediate distance after implantation of a +1.5 diopters (D) addition, aspheric, rotational asymmetric multifocal intraocular lens (MIOL). Patients underwent bilateral cataract surgery with implantation of an aspheric, asymmetric MIOL with +1.5 D near addition. A complete ophthalmological examination was performed preoperatively and 3 months postoperatively. The main outcome measures were monocular and binocular uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), uncorrected intermediate visual acuity (UIVA), distance corrected intermediate visual acuity (DCIVA), uncorrected near visual acuity (UNVA) and distance corrected keratometry, and manifest refraction. The Salzburg Reading Desk was used to analyze unilateral and bilateral functional vision with uncorrected and corrected reading acuity, reading distance, reading speed, and the smallest log-scaled print size that could be read effectively at near and intermediate distances. The study comprised 60 eyes of 30 patients (mean age, 68.30 ± 9.26 years; range, 34 to 80 years). There was significant improvement in UDVA and CDVA. Mean UIVA was 0.01 ± 0.09 logarithm of the minimum angle of resolution (logMAR) and mean DCIVA was -0.02 ± 0.11 logMAR. In Salzburg Reading Desk analysis for UIVA, the mean subjective intermediate distance was 67.58 ± 8.59 cm with mean UIVA of -0.02 ± 0.09 logMAR and mean word count of 96.38 ± 28.32 words/min. The new aspheric, asymmetric, +1.5 D near addition MIOL offers good results for distance visual function in combination with good performance for intermediate distances and functional results for near distance.

Heterogeneous electrochemical CO2 reduction using nonmetallic carbon-based catalysts: current status and future challenges

NASA Astrophysics Data System (ADS)

Ma, Tao; Fan, Qun; Tao, Hengcong; Han, Zishan; Jia, Mingwen; Gao, Yunnan; Ma, Wangjing; Sun, Zhenyu

2017-11-01

Electrochemical CO2 reduction (ECR) offers an important pathway for renewable energy storage and fuels production. It still remains a challenge in designing highly selective, energy-efficient, robust, and cost-effective electrocatalysts to facilitate this kinetically slow process. Metal-free carbon-based materials have features of low cost, good electrical conductivity, renewability, diverse structure, and tunability in surface chemistry. In particular, surface functionalization of carbon materials, for example by doping with heteroatoms, enables access to unique active site architectures for CO2 adsorption and activation, leading to interesting catalytic performances in ECR. We aim to provide a comprehensive review of this category of metal-free catalysts for ECR, providing discussions and/or comparisons among different nonmetallic catalysts, and also possible origin of catalytic activity. Fundamentals and some future challenges are also described.

A Novel High Performance Liquid Chromatographic Method for Simultaneous Determination of Ceftriaxone and Sulbactam in Sulbactomax

PubMed Central

Shrivastava, Sanjay Mohan; Singh, Rajkumar; Tariq, Abu; Siddiqui, Masoom Raza; Yadav, Jitendar; Negi, P. S.; Chaudhary, Manu

2009-01-01

An isocratic liquid chromatographic method with UV detection at 220 nm is described for simultaneous determination of ceftriaxone sodium and sulbactam sodium in Sulbactomax. Chromatographic separation of two drugs was achieved on a Hypersil ODS C-18 column using a mobile phase consisting of a binary mixture of acetonitrile and tetrabutyl ammonium hydroxide adjusted to pH7.0 with orthophosphoric acid in ratio 70:30. The developed Liquid Chromatographic method offers symmetric peak shape, good resolution and reasonable retention time for both drugs. Linearity, accuracy and precision were found to be acceptable over the concentration range of 125-750 ppm for ceftriaxone sodium and 62.5-375 ppm for sulbactam sodium. The LC method can be used for the quality control of formulated products containing ceftriaxone and sulbactam. PMID:23675112

Outbreak Column 16: Cognitive errors in outbreak decision making.

PubMed

Curran, Evonne T

2015-01-01

During outbreaks, decisions must be made without all the required information. People, including infection prevention and control teams (IPCTs), who have to make decisions during uncertainty use heuristics to fill the missing data gaps. Heuristics are mental model short cuts that by-and-large enable us to make good decisions quickly. However, these heuristics contain biases and effects that at times lead to cognitive (thinking) errors. These cognitive errors are not made to deliberately misrepresent any given situation; we are subject to heuristic biases when we are trying to perform optimally. The science of decision making is large; there are over 100 different biases recognised and described. Outbreak Column 16 discusses and relates these heuristics and biases to decision making during outbreak prevention, preparedness and management. Insights as to how we might recognise and avoid them are offered.

Colour and fat content as intrinsic cues for consumers attitudes towards meat product quality

NASA Astrophysics Data System (ADS)

Ristić, M.; Troeger, K.; Đinović-Stojanović, J.; Knežević, N.; Damnjanović, M.

2017-09-01

The aim of this study was to evaluate consumers’ attitudes towards sensory properties of chicken, royal and beef salami, meat products from Zlatiborac Meat Company. Sensory evaluation was performed by Serbian consumers (n=1018) in four retail stores (Delhaize) in Belgrade. Consumers were asked for their preference concerning the colour and fat of three selected salami and then completed questionnaire of socio-demographic information including eating behaviour. Selected smoked meat products were evaluated in the DLG Test Center Food, Germany. Consumers, at all education levels and in all age groups, evaluated colour as good and fat as sufficient with a significantly (p<0.05) higher percentage in comparison with other offered answers. All smoked products passed the DLG tests and received “DLG award winner” medals in Gold (73%) or Silver (27%).

Turbulence-induced channel crosstalk in an orbital angular momentum-multiplexed free-space optical link

NASA Astrophysics Data System (ADS)

Anguita, Jaime A.; Neifeld, Mark A.; Vasic, Bane V.

2008-05-01

A multichannel free-space optical (FSO) communication system based on orbital angular momentum (OAM)-carrying beams is studied. We numerically analyze the effects of atmospheric turbulence on the system and find that turbulence induces attenuation and crosstalk among channels. Based on a model in which the constituent channels are binary symmetric and crosstalk is a Gaussian noise source, we find optimal sets of OAM states at each turbulence condition studied and determine the aggregate capacity of the multichannel system at those conditions. OAM-multiplexed FSO systems that operate in the weak turbulence regime are found to offer good performance. We verify that the aggregate capacity decreases as the turbulence increases. A per-channel bit-error rate evaluation is presented to show the uneven effects of crosstalk on the constituent channels.

Data Management System (DMS) testbed user's manual development, volumes 1 and 2

NASA Technical Reports Server (NTRS)

Mcbride, John G.; Cohen, Norman

1986-01-01

A critical review of the network communication services contained in the Tinman User's Manual for Data Management System Test Bed (Tinman DMS User's Manual) is presented. The review is from the perspective of applying modern software engineering principles and using the Ada language effectively to ensure the test bed network communication services provide a robust capability. Overall the material on network communication services reflects a reasonably good grasp of the Ada language. Language features are appropriately used for most services. Design alternatives are offered to provide improved system performance and a basis for better application software development. Section two contains a review and suggests clarifications of the Statement of Policies and Services contained in Appendix B of the Tinman DMS User's Manual. Section three contains a review of the Network Communication Services and section four contains concluding comments.

Topology optimized and 3D printed polymer-bonded permanent magnets for a predefined external field

NASA Astrophysics Data System (ADS)

Huber, C.; Abert, C.; Bruckner, F.; Pfaff, C.; Kriwet, J.; Groenefeld, M.; Teliban, I.; Vogler, C.; Suess, D.

2017-08-01

Topology optimization offers great opportunities to design permanent magnetic systems that have specific external field characteristics. Additive manufacturing of polymer-bonded magnets with an end-user 3D printer can be used to manufacture permanent magnets with structures that had been difficult or impossible to manufacture previously. This work combines these two powerful methods to design and manufacture permanent magnetic systems with specific properties. The topology optimization framework is simple, fast, and accurate. It can also be used for the reverse engineering of permanent magnets in order to find the topology from field measurements. Furthermore, a magnetic system that generates a linear external field above the magnet is presented. With a volume constraint, the amount of magnetic material can be minimized without losing performance. Simulations and measurements of the printed systems show very good agreement.

Robotics and neurosurgery.

PubMed

Nathoo, Narendra; Pesek, Todd; Barnett, Gene H

2003-12-01

Ultimately, neurosurgery performed via a robotic interface will serve to improve the standard of a neurosurgeon's skills, thus making a good surgeon a better surgeon. In fact, computer and robotic instrumentation will become allies to the neurosurgeon through the use of these technologies in training, diagnostic, and surgical events. Nonetheless, these technologies are still in an early stage of development, and each device developed will entail its own set of challenges and limitations for use in clinical settings. The future operating room should be regarded as an integrated information system incorporating robotic surgical navigators and telecontrolled micromanipulators, with the capabilities of all principal neurosurgical concepts, sharing information, and under the control of a single person, the neurosurgeon. The eventual integration of robotic technology into mainstream clinical neurosurgery offers the promise of a future of safer, more accurate, and less invasive surgery that will result in improved patient outcome.

High dynamic range infrared radiometry and imaging

NASA Technical Reports Server (NTRS)

Coon, Darryl D.; Karunasiri, R. P. G.; Bandara, K. M. S. V.

1988-01-01

The use is described of cryogenically cooled, extrinsic silicon infrared detectors in an unconventional mode of operation which offers an unusually large dynamic range. The system performs intensity-to-frequency conversion at the focal plane via simple circuits with very low power consumption. The incident IR intensity controls the repetition rate of short duration output pulses over a pulse rate dynamic range of about 10(6). Theory indicates the possibility of monotonic and approx. linear response over the full dynamic range. A comparison between the theoretical and the experimental results shows that the model provides a reasonably good description of experimental data. Some measurements of survivability with a very intense IR source were made on these devices and found to be very encouraging. Evidence continues to indicate that some variations in interpulse time intervals are deterministic rather than probabilistic.

A hybrid LBG/lattice vector quantizer for high quality image coding

NASA Technical Reports Server (NTRS)

Ramamoorthy, V.; Sayood, K.; Arikan, E. (Editor)

1991-01-01

It is well known that a vector quantizer is an efficient coder offering a good trade-off between quantization distortion and bit rate. The performance of a vector quantizer asymptotically approaches the optimum bound with increasing dimensionality. A vector quantized image suffers from the following types of degradations: (1) edge regions in the coded image contain staircase effects, (2) quasi-constant or slowly varying regions suffer from contouring effects, and (3) textured regions lose details and suffer from granular noise. All three of these degradations are due to the finite size of the code book, the distortion measures used in the design, and due to the finite training procedure involved in the construction of the code book. In this paper, we present an adaptive technique which attempts to ameliorate the edge distortion and contouring effects.

Design of Compact Flower Shape Dual Notched-Band Monopole Antenna for Extended UWB Wireless Applications

NASA Astrophysics Data System (ADS)

Sharma, Manish; Awasthi, Y. K.; Singh, Himanshu; Kumar, Raj; Kumari, Sarita

2016-11-01

In this letter, a compact monopole antenna for ultra wideband (UWB) applications is proposed with small size of 18×20=360 mm2. Antenna consist of a flower shape radiating patch with a pair of C-shaped slots which offer two notch bands for WiMAX (3.04-3.68 GHz) & WLAN (4.73-5.76 GHz) and two rectangular shaped slots in the ground plane which provides a wide measured usable fractional extended bandwidth of 163 % (2.83-14.0 GHz) with improved VSWR. Moreover, it is also convenient for other wireless application as close range radar, 8-12 GHz in X-band. Measured radiation patterns exhibits nearly omnidirectional in H-plane and dipole like pattern in E-plane across the bandwidth and furthermore exhibits good time domain performance.

Direct Observation of Conducting Filaments in Tungsten Oxide Based Transparent Resistive Switching Memory.

PubMed

Qian, Kai; Cai, Guofa; Nguyen, Viet Cuong; Chen, Tupei; Lee, Pooi See

2016-10-05

Transparent nonvolatile memory has great potential in integrated transparent electronics. Here, we present highly transparent resistive switching memory using stoichiometric WO 3 film produced by cathodic electrodeposition with indium tin oxide electrodes. The memory device demonstrates good optical transmittance, excellent operative uniformity, low operating voltages (+0.25 V/-0.42 V), and long retention time (>10 4 s). Conductive atomic force microscopy, ex situ transmission electron microscopy, and X-ray photoelectron spectroscopy experiments directly confirm that the resistive switching effects occur due to the electric field-induced formation and annihilation of the tungsten-rich conductive channel between two electrodes. Information on the physical and chemical nature of conductive filaments offers insightful design strategies for resistive switching memories with excellent performances. Moreover, we demonstrate the promising applicability of the cathodic electrodeposition method for future resistive memory devices.

Construction of a small and lightweight hyperspectral imaging system

NASA Astrophysics Data System (ADS)

Vogel, Britta; Hünniger, Dirk; Bastian, Georg

2014-05-01

The analysis of the reflected sunlight offers great opportunity to gain information about the environment, including vegetation and soil. In the case of plants the wavelength ratio of the reflected light usually undergoes a change if the state of growth or state of health changes. So the measurement of the reflected light allows drawing conclusions about the state of, amongst others, vegetation. Using a hyperspectral imaging system for data acquisition leads to a large dataset, which can be evaluated with respect to several different questions to obtain various information by one measurement. Based on commercially available plain optical components we developed a small and lightweight hyperspectral imaging system within the INTERREG IV A-Project SMART INSPECTORS. The project SMART INSPECTORS [Smart Aerial Test Rigs with Infrared Spectrometers and Radar] deals with the fusion of airborne visible and infrared imaging remote sensing instruments and wireless sensor networks for precision agriculture and environmental research. A high performance camera was required in terms of good signal, good wavelength resolution and good spatial resolution, while severe constraints of size, proportions and mass had to be met due to the intended use on small unmanned aerial vehicles. The detector was chosen to operate without additional cooling. The refractive and focusing optical components were identified by supporting works with an optical raytracing software and a self-developed program. We present details of design and construction of our camera system, test results to confirm the optical simulation predictions as well as our first measurements.

Nonlinear inversion of resistivity sounding data for 1-D earth models using the Neighbourhood Algorithm

NASA Astrophysics Data System (ADS)

Ojo, A. O.; Xie, Jun; Olorunfemi, M. O.

2018-01-01

To reduce ambiguity related to nonlinearities in the resistivity model-data relationships, an efficient direct-search scheme employing the Neighbourhood Algorithm (NA) was implemented to solve the 1-D resistivity problem. In addition to finding a range of best-fit models which are more likely to be global minimums, this method investigates the entire multi-dimensional model space and provides additional information about the posterior model covariance matrix, marginal probability density function and an ensemble of acceptable models. This provides new insights into how well the model parameters are constrained and make assessing trade-offs between them possible, thus avoiding some common interpretation pitfalls. The efficacy of the newly developed program is tested by inverting both synthetic (noisy and noise-free) data and field data from other authors employing different inversion methods so as to provide a good base for comparative performance. In all cases, the inverted model parameters were in good agreement with the true and recovered model parameters from other methods and remarkably correlate with the available borehole litho-log and known geology for the field dataset. The NA method has proven to be useful whilst a good starting model is not available and the reduced number of unknowns in the 1-D resistivity inverse problem makes it an attractive alternative to the linearized methods. Hence, it is concluded that the newly developed program offers an excellent complementary tool for the global inversion of the layered resistivity structure.

Freestanding NiFe Oxyfluoride Holey Film with Ultrahigh Volumetric Capacitance for Flexible Asymmetric Supercapacitors.

PubMed

Liang, Kun; Marcus, Kyle; Yang, Zhenzhong; Zhou, Le; Pan, Hao; Bai, Yuanli; Du, Yingge; Engelhard, Mark H; Yang, Yang

2018-01-01

In this work, a freestanding NiFe oxyfluoride (NiFeOF) holey film is prepared by electrochemical deposition and anodic treatments. With the combination of good electrical conductivity and holey structure, the NiFeOF holey film offers superior electrochemical performance with maximum specific capacitance of 670 F cm -3 (134 mF cm -2 ), due to the following reasons: (i) The residual metal alloy framework can be used as the current collector to improve electrode conductivity. Moreover, the as-prepared freestanding NiFeOF holey film can be used as a supercapacitor electrode without reliance on binders and other additives. The residual metal alloy framework and binder-free electrode effectively reduce electrode resistance, thus improving electron transport. (ii) The highly interconnected holey structure and hierarchical pore distribution provide a high specific surface area to improve electron transport, enhancing rapid ion transport, and mitigating diffusion limitations throughout the holey film. (iii) The excellent mechanical characteristics facilitate flexibility and cyclability related performance. Additionally, the NiFeOF holey film presents exceptional electrochemical performance, showing that it is a promising alternative for small/microsize electronic devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Using finite element modelling and experimental methods to investigate planar coil sensor topologies for inductive measurement of displacement

NASA Astrophysics Data System (ADS)

Moreton, Gregory; Meydan, Turgut; Williams, Paul

2018-04-01

The usage of planar sensors is widespread due to their non-contact nature and small size profiles, however only a few basic design types are generally considered. In order to develop planar coil designs we have performed extensive finite element modelling (FEM) and experimentation to understand the performance of different planar sensor topologies when used in inductive sensing. We have applied this approach to develop a novel displacement sensor. Models of different topologies with varying pitch values have been analysed using the ANSYS Maxwell FEM package, furthermore the models incorporated a movable soft magnetic amorphous ribbon element. The different models used in the FEM were then constructed and experimentally tested with topologies that included mesh, meander, square coil, and circular coil configurations. The sensors were used to detect the displacement of the amorphous ribbon. A LabView program controlled both the displacement stage and the impedance analyser, the latter capturing the varying inductance values with ribbon displacement. There was good correlation between the FEM models and the experimental data confirming that the methodology described here offers an effective way for developing planar coil based sensors with improved performance.

Thin co-radial bipolar leads: technology and clinical performance.

PubMed

Fahraeus, T; Israel, C W; Wöllenstein, M

2001-09-01

While bipolar leads offer advantages such as better sensing performance than unipolar leads, their use has been limited by a larger lead diameter and reports about a high failure rate of several bipolar lead models. This has led to the development of thin bipolar leads using a special technology which aims at improving lead safety. Leads with monofilar thin conductors (drawn filled tube) which are individually coated with a very resistant material (ETFE) have been developed. Using a co-radial instead of co-axial bipolar conductor design, the lead diameter could be reduced to 4.5 F compared to 6-7 F of conventional bipolar leads. Bench testing demonstrated a significant improvement of this lead technology with respect to degradation of insulation material by biochemically reactive solutions. Also mechanical characteristics such as resistance to tearing forces and compression showed a high lead durability. From our own experience, co-radial bipolar leads show a favorable electrical performance with the exception of a relatively low pacing impedance. Also during long-term follow-up, the rate of lead failure was very low. These findings are corroborated by other clinical studies which also demonstrated good handling characteristics of thin bipolar leads during implantation.

Retention-error patterns in complex alphanumeric serial-recall tasks.

PubMed

Mathy, Fabien; Varré, Jean-Stéphane

2013-01-01

We propose a new method based on an algorithm usually dedicated to DNA sequence alignment in order to both reliably score short-term memory performance on immediate serial-recall tasks and analyse retention-error patterns. There can be considerable confusion on how performance on immediate serial list recall tasks is scored, especially when the to-be-remembered items are sampled with replacement. We discuss the utility of sequence-alignment algorithms to compare the stimuli to the participants' responses. The idea is that deletion, substitution, translocation, and insertion errors, which are typical in DNA, are also typical putative errors in short-term memory (respectively omission, confusion, permutation, and intrusion errors). We analyse four data sets in which alphanumeric lists included a few (or many) repetitions. After examining the method on two simple data sets, we show that sequence alignment offers 1) a compelling method for measuring capacity in terms of chunks when many regularities are introduced in the material (third data set) and 2) a reliable estimator of individual differences in short-term memory capacity. This study illustrates the difficulty of arriving at a good measure of short-term memory performance, and also attempts to characterise the primary factors underpinning remembering and forgetting.

The upgrade of the H.E.S.S. cameras

NASA Astrophysics Data System (ADS)

Giavitto, Gianluca; Ashton, Terry; Balzer, Arnim; Berge, David; Brun, Francois; Chaminade, Thomas; Delagnes, Eric; Fontaine, Gerard; Füßling, Matthias; Giebels, Berrie; Glicenstein, Jean-Francois; Gräber, Tobias; Hinton, Jim; Jahnke, Albert; Klepser, Stefan; Kossatz, Marko; Kretzschmann, Axel; Lefranc, Valentin; Leich, Holger; Lüdecke, Hartmut; Lypova, Iryna; Manigot, Pascal; Marandon, Vincent; Moulin, Emmanuel; de Naurois, Mathieu; Nayman, Patrick; Ohm, Stefan; Penno, Marek; Ross, Duncan; Salek, David; Schade, Markus; Schwab, Thomas; Simoni, Rachel; Stegmann, Christian; Steppa, Constantin; Thornhill, Julian; Toussnel, Francois

2017-01-01

The High Energy Stereoscopic System (H.E.S.S.) is an array of five imaging atmospheric Cherenkov telescopes (IACT) located in Namibia. In order to assure the continuous operation of H.E.S.S. at its full sensitivity until and possibly beyond the advent of CTA, the older cameras, installed in 2003, are currently undergoing an extensive upgrade. Its goals are reducing the system failure rate, reducing the dead time and improving the overall performance of the array. All camera components have been upgraded, except the mechanical structure and the photo-multiplier tubes (PMTs). Novel technical solutions have been introduced: the upgraded readout electronics is based on the NECTAr analog memory chip; the control of the hardware is carried out by an FPGA coupled to an embedded ARM computer; the control software was re-written from scratch and it is based on modern C++ open source libraries. These hardware and software solutions offer very good performance, robustness and flexibility. The first camera was fielded in July 2015 and has been successfully commissioned; the rest is scheduled to be upgraded in September 2016. The present contribution describes the design, the testing and the performance of the new H.E.S.S. camera and its components.

Tailoring rice flour structure by rubbery milling for improved gluten-free baked goods.

PubMed

Brütsch, Linda; Tribolet, Liliane; Isabettini, Stéphane; Soltermann, Patrick; Baumann, Andreas; Windhab, Erich J

2018-05-10

Ever-growing demand for gluten-free products calls for the development of novel food processing techniques to widen the range of existing baked goods. Extensive research has been targeted towards recipe optimization, widely neglecting the tailoring potential of process-induced structuring of gluten-free raw materials. Herein, we address this shortcoming by demonstrating the potential of rubbery milling for the generation of structure and techno-functionality in breads obtained from a variety of rice flour types. Moisture and temperature induced state transitions during milling were exploited to tailor the physicochemical properties of the flour. Moisture addition during conditioning of the different rice varieties and milling in the rubbery state considerably decreased starch damage due to more gentle disintegration. The degree of starch damage dictated the water absorption capacity of the rice flour types. Flour types with reduced starch damage upon milling offered lower dough densities, yielding bread loafs with a higher volume and better appearance. The choice of rice variety enables fine-tuning of the final product quality by influencing the dough viscoelasticity, which defines the final loaf volume. Whole grain rice flour dramatically increased the loaf volume, whilst simultaneously offering nutritional benefits. Combining the proposed functionalised flour types with current and future advances in product recipes paves the way towards optimised gluten-free goods.

Why significant variables aren't automatically good predictors.

PubMed

Lo, Adeline; Chernoff, Herman; Zheng, Tian; Lo, Shaw-Hwa

2015-11-10

Thus far, genome-wide association studies (GWAS) have been disappointing in the inability of investigators to use the results of identified, statistically significant variants in complex diseases to make predictions useful for personalized medicine. Why are significant variables not leading to good prediction of outcomes? We point out that this problem is prevalent in simple as well as complex data, in the sciences as well as the social sciences. We offer a brief explanation and some statistical insights on why higher significance cannot automatically imply stronger predictivity and illustrate through simulations and a real breast cancer example. We also demonstrate that highly predictive variables do not necessarily appear as highly significant, thus evading the researcher using significance-based methods. We point out that what makes variables good for prediction versus significance depends on different properties of the underlying distributions. If prediction is the goal, we must lay aside significance as the only selection standard. We suggest that progress in prediction requires efforts toward a new research agenda of searching for a novel criterion to retrieve highly predictive variables rather than highly significant variables. We offer an alternative approach that was not designed for significance, the partition retention method, which was very effective predicting on a long-studied breast cancer data set, by reducing the classification error rate from 30% to 8%.

Final Year Nursing Students in Nigeria; How Knowledgeable and Prepared are They to Offer Medical Care to Patients with Chronic Kidney Disease?

PubMed Central

Okwuonu, Chimezie Godswill; Kanu, Hannah Sylvanus; Odigie, Ojeh-Oziegbe

2017-01-01

Background: Nurses play an important role in the management of chronic kidney disease (CKD) patients at primary, secondary, and tertiary levels of care. In other to perform their functions, it is pertinent that they have a good understanding of kidney functions and CKD. We do not know if the current educational curriculum prepares them adequately for this role. Aim: To assess the knowledge level of kidney functions and diseases among final year nursing students in Abia State Nigeria. Materials and Methods: This was a cross sectional study involving final year diploma and Bachelor of nursing (B. Nursing) students who were randomly chosen. Structured, self-administered questionnaire containing 18 items was the tool for data collection. A score of one was given for each correctly answered question on functions of the kidney, symptoms, signs, causes, and complications of CKD. A score of 50% and above was regarded as good knowledge. Results: Two hundred questionnaires were distributed, but 186 were returned (response rate of 93%). Male:female ratio was 1:14.5. One hundred and seventeen (62.9%) knew the correct definition of CKD, but only 69 (37.1%) knew the normal range of glomerular filtration rate. Eighty-one percent had good knowledge of kidney functions while 39 (21%) had good knowledge of CKD. Overall, 42 (22.6%) had good knowledge of kidney functions and CKD. Students who rotated through the dialysis unit during their clinical posting had higher mean knowledge score than others (P = 0.03). There was no significant difference in the mean knowledge scores of the diploma and B. Nursing students (P = 0.76). Conclusion: The majority of the final year students had poor knowledge of CKD. There is need to expand the current teaching curriculum so as to increase the knowledge of these future nurses on the basic concepts of CKD to improve outcomes of patient management. PMID:28300046

47 CFR 95.183 - Prohibited communications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... PERSONAL RADIO SERVICES General Mobile Radio Service (GMRS) § 95.183 Prohibited communications. (a) A... amuse or entertain; (7) Obscene, profane or indecent words, language or meaning; (8) Advertisements or offers for the sale of goods or services; (9) Advertisements for a political candidate or political...

The Aesthetic Values of Film.

ERIC Educational Resources Information Center

May, Jill P.

1982-01-01

Discusses the criteria for analysis of excellence in children's films and factors involved in the production of a good film, and offers an analysis of three children's films: "The Bridge of Adam Rush,""Angel and Big Joe," and "A Pretty Kettle of Fish." Three references are provided. (EJS)

Go Where the Grants Are

ERIC Educational Resources Information Center

Anderson, Cynthia; Knop, Kathi

2008-01-01

In the world of grant-making, there are private, corporate, and government sources at the local, state, and federal level, and each of them has funds to award. The trick is to make a good match. This article offers tips for finding grant funds and writing grants.

Good Counsel on Curbing Counselors' Stress.

ERIC Educational Resources Information Center

Bucci, Frank A.

1994-01-01

Presents results from survey of 610 College Placement Council members to determine causes of career counselor stress. Offers 13 suggestions for relieving stress: learn to relax, resist perfectionism, learn to laugh, listen to soft music, try stress inoculation, practice desensitization, get organized, physical exercise, healthy lifestyles, get…

Cheating the Children.

ERIC Educational Resources Information Center

Rist, Marilee C.

1993-01-01

Schools are the victims, as bid-rigging scandals in the dairy-products industry surface in 13 states. School boards, in close cooperation with superintendents and district business managers, have the responsibility to detect bid-rigging or collusion. Offers guides for good business management and warning signs of bid-rigging. (MLF)

Self-Determination.

ERIC Educational Resources Information Center

Transition Summary, 1988

1988-01-01

This issue of "Transition Summary" contains articles about self-determination and becoming a good self-advocate, with each article reflecting the experience of someone who has grown up with a disability. "The Many Facets of Self-Determination" (Michael Ward) discusses the concept of self-determination; offers an historical perspective of the…

76 FR 80887 - Proposed Information Collection; Comment Request; Export Trading Companies Contact Facilitation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... Request; Export Trading Companies Contact Facilitation Services AGENCY: International Trade [email protected] ). FOR FURTHER INFORMATION CONTACT: Requests for additional information or copies of the... facilitate contact between producers of exportable goods and services, and firms offering export trade...

Compression of stereoscopic video using MPEG-2

NASA Astrophysics Data System (ADS)

Puri, A.; Kollarits, Richard V.; Haskell, Barry G.

1995-10-01

Many current as well as emerging applications in areas of entertainment, remote operations, manufacturing industry and medicine can benefit from the depth perception offered by stereoscopic video systems which employ two views of a scene imaged under the constraints imposed by human visual system. Among the many challenges to be overcome for practical realization and widespread use of 3D/stereoscopic systems are good 3D displays and efficient techniques for digital compression of enormous amounts of data while maintaining compatibility with normal video decoding and display systems. After a brief introduction to the basics of 3D/stereo including issues of depth perception, stereoscopic 3D displays and terminology in stereoscopic imaging and display, we present an overview of tools in the MPEG-2 video standard that are relevant to our discussion on compression of stereoscopic video, which is the main topic of this paper. Next, we outilne the various approaches for compression of stereoscopic video and then focus on compatible stereoscopic video coding using MPEG-2 Temporal scalability concepts. Compatible coding employing two different types of prediction structures become potentially possible, disparity compensated prediction and combined disparity and motion compensated predictions. To further improve coding performance and display quality, preprocessing for reducing mismatch between the two views forming stereoscopic video is considered. Results of simulations performed on stereoscopic video of normal TV resolution are then reported comparing the performance of two prediction structures with the simulcast solution. It is found that combined disparity and motion compensated prediction offers the best performance. Results indicate that compression of both views of stereoscopic video of normal TV resolution appears feasible in a total of 6 to 8 Mbit/s. We then discuss regarding multi-viewpoint video, a generalization of stereoscopic video. Finally, we describe ongoing efforts within MPEG-2 to define a profile for stereoscopic video coding, as well as, the promise of MPEG-4 in addressing coding of multi-viewpoint video.

Compression of stereoscopic video using MPEG-2

NASA Astrophysics Data System (ADS)

Puri, Atul; Kollarits, Richard V.; Haskell, Barry G.

1995-12-01

Many current as well as emerging applications in areas of entertainment, remote operations, manufacturing industry and medicine can benefit from the depth perception offered by stereoscopic video systems which employ two views of a scene imaged under the constraints imposed by human visual system. Among the many challenges to be overcome for practical realization and widespread use of 3D/stereoscopic systems are good 3D displays and efficient techniques for digital compression of enormous amounts of data while maintaining compatibility with normal video decoding and display systems. After a brief introduction to the basics of 3D/stereo including issues of depth perception, stereoscopic 3D displays and terminology in stereoscopic imaging and display, we present an overview of tools in the MPEG-2 video standard that are relevant to our discussion on compression of stereoscopic video, which is the main topic of this paper. Next, we outline the various approaches for compression of stereoscopic video and then focus on compatible stereoscopic video coding using MPEG-2 Temporal scalability concepts. Compatible coding employing two different types of prediction structures become potentially possible, disparity compensated prediction and combined disparity and motion compensated predictions. To further improve coding performance and display quality, preprocessing for reducing mismatch between the two views forming stereoscopic video is considered. Results of simulations performed on stereoscopic video of normal TV resolution are then reported comparing the performance of two prediction structures with the simulcast solution. It is found that combined disparity and motion compensated prediction offers the best performance. Results indicate that compression of both views of stereoscopic video of normal TV resolution appears feasible in a total of 6 to 8 Mbit/s. We then discuss regarding multi-viewpoint video, a generalization of stereoscopic video. Finally, we describe ongoing efforts within MPEG-2 to define a profile for stereoscopic video coding, as well as, the promise of MPEG-4 in addressing coding of multi-viewpoint video.

28 CFR 523.10 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.10 Purpose and scope. (a) The Bureau of Prisons awards extra good time credit for performing exceptionally meritorious service, or for performing duties... of extra good time award at a time (e.g., an inmate earning industrial or camp good time is not...

28 CFR 523.10 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.10 Purpose and scope. (a) The Bureau of Prisons awards extra good time credit for performing exceptionally meritorious service, or for performing duties... of extra good time award at a time (e.g., an inmate earning industrial or camp good time is not...

28 CFR 523.10 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.10 Purpose and scope. (a) The Bureau of Prisons awards extra good time credit for performing exceptionally meritorious service, or for performing duties... of extra good time award at a time (e.g., an inmate earning industrial or camp good time is not...

28 CFR 523.10 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.10 Purpose and scope. (a) The Bureau of Prisons awards extra good time credit for performing exceptionally meritorious service, or for performing duties... of extra good time award at a time (e.g., an inmate earning industrial or camp good time is not...

28 CFR 523.10 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.10 Purpose and scope. (a) The Bureau of Prisons awards extra good time credit for performing exceptionally meritorious service, or for performing duties... of extra good time award at a time (e.g., an inmate earning industrial or camp good time is not...

Well-Being and the Social Environment of Work: A Systematic Review of Intervention Studies.

PubMed

Daniels, Kevin; Watson, David; Gedikli, Cigdem

2017-08-16

There is consistent evidence that a good social environment in the workplace is associated with employee well-being. However, there has been no specific review of interventions to improve well-being through improving social environments at work. We conducted a systematic review of such interventions, and also considered performance as an outcome. We found eight studies of interventions. Six studies were of interventions that were based on introducing shared social activities into workgroups. Six out of the six studies demonstrated improvements in well-being across the sample (five studies), or for an identifiable sub-group (one study). Four out of the five studies demonstrated improvements in social environments, and four out of the five studies demonstrated improvements in indicators of performance. Analysis of implementation factors indicated that the interventions based on shared activities require some external facilitation, favorable worker attitudes prior to the intervention, and several different components. We found two studies that focused on improving fairness perceptions in the workplace. There were no consistent effects of these interventions on well-being or performance. We conclude that there is some evidence that interventions that increase the frequency of shared activities between workers can improve worker well-being and performance. We offer suggestions for improving the evidence base.

Well-Being and the Social Environment of Work: A Systematic Review of Intervention Studies

PubMed Central

Gedikli, Cigdem

2017-01-01

There is consistent evidence that a good social environment in the workplace is associated with employee well-being. However, there has been no specific review of interventions to improve well-being through improving social environments at work. We conducted a systematic review of such interventions, and also considered performance as an outcome. We found eight studies of interventions. Six studies were of interventions that were based on introducing shared social activities into workgroups. Six out of the six studies demonstrated improvements in well-being across the sample (five studies), or for an identifiable sub-group (one study). Four out of the five studies demonstrated improvements in social environments, and four out of the five studies demonstrated improvements in indicators of performance. Analysis of implementation factors indicated that the interventions based on shared activities require some external facilitation, favorable worker attitudes prior to the intervention, and several different components. We found two studies that focused on improving fairness perceptions in the workplace. There were no consistent effects of these interventions on well-being or performance. We conclude that there is some evidence that interventions that increase the frequency of shared activities between workers can improve worker well-being and performance. We offer suggestions for improving the evidence base. PMID:28813009

The storage system of PCM based on random access file system

NASA Astrophysics Data System (ADS)

Han, Wenbing; Chen, Xiaogang; Zhou, Mi; Li, Shunfen; Li, Gezi; Song, Zhitang

2016-10-01

Emerging memory technologies such as Phase change memory (PCM) tend to offer fast, random access to persistent storage with better scalability. It's a hot topic of academic and industrial research to establish PCM in storage hierarchy to narrow the performance gap. However, the existing file systems do not perform well with the emerging PCM storage, which access storage medium via a slow, block-based interface. In this paper, we propose a novel file system, RAFS, to bring about good performance of PCM, which is built in the embedded platform. We attach PCM chips to the memory bus and build RAFS on the physical address space. In the proposed file system, we simplify traditional system architecture to eliminate block-related operations and layers. Furthermore, we adopt memory mapping and bypassed page cache to reduce copy overhead between the process address space and storage device. XIP mechanisms are also supported in RAFS. To the best of our knowledge, we are among the first to implement file system on real PCM chips. We have analyzed and evaluated its performance with IOZONE benchmark tools. Our experimental results show that the RAFS on PCM outperforms Ext4fs on SDRAM with small record lengths. Based on DRAM, RAFS is significantly faster than Ext4fs by 18% to 250%.

Breakthrough thinking from inside the box.

PubMed

Coyne, Kevin P; Clifford, Patricia Gorman; Dye, Renée

2007-12-01

Companies often begin their search for great ideas either by encouraging wild, outside-the-box thinking or by conducting quantitative analysis of existing market and financial data and customer opinions. Those approaches can produce middling ideas at best, say Coyne, founder of an executive-counseling firm in Atlanta, and Clifford and Dye, strategy experts at McKinsey. The problem with the first method is that few people are very good at unstructured, abstract brainstorming. The problems with the second are that databases are usually compiled to describe current--not future--offerings, and customers rarely can tell you whether they need or want a product if they've never seen it. The secret to getting your organization to regularly generate lots of good ideas, and occasionally some great ones, is deceptively simple: First, create new boxes for people to think within so that they don't get lost in the cosmos and they have a basis for offering ideas and knowing whether they're making progress in the brainstorming session. Second, redesign ideation processes to remove obstacles that interfere with the flow of ideas--such as most people's aversion to speaking in groups larger than ten. This article offers a tested approach that poses concrete questions. For example, what do Rollerblades, Häagen-Dazs ice cream, and Spider-Man movies have in common? The answer: Each is something that adults loved as children and that was reproduced in an expensive form for grown-ups. Asking brainstorming participants to ponder how their childhood passions could be recast as adult offerings might generate some fabulous ideas for new products or services.

Effects of Offering Look-Alike Products as Smart Snacks in Schools.

PubMed

Harris, Jennifer L; Hyary, Maia; Schwartz, Marlene B

2016-12-01

In 2014, USDA established nutrition standards for snack foods sold in schools. Many manufacturers reformulated products to meet these Smart Snacks standards, but continue to advertise unhealthy versions of the same brands. Furthermore, Smart Snack packaging often looks similar to less nutritious versions sold outside of schools (look-alike products). This practice may confuse consumers about the nutritional quality of Smart Snacks and raise concerns about schools selling them. An online experiment with 659 students (13-17 years) and 859 parents (children ages 10-13) was performed. Participants randomly viewed information about snacks sold at a hypothetical school, including (1) look-alike Smart Snacks; (2) existing store versions of the same brands; (3) repackaged Smart Snacks (highlighting differences versus unhealthy versions); or (4) consistent brands (i.e., Smart Snack versions also sold in stores). They then rated the individual snacks offered and the school selling them. As hypothesized, students and parents rated look-alike and store versions similarly in taste, healthfulness, and purchase intent, while considering repackaged Smart Snacks as healthier, but less tasty. Most participants also inaccurately believed they had seen look-alike products for sale in stores. Furthermore, they rated schools offering look-alike Smart Snacks and store versions as less concerned about students' health and well-being than schools in the other two conditions. The nutritional quality of snacks sold in schools has improved, but many Smart Snacks are virtually indistinguishable from less nutritious versions widely sold outside of schools. This practice likely benefits the brands, but may not improve children's overall diet and undermines schools' ability to teach good nutrition.

The relationship between corporate environmental performance and environmental disclosure: an empirical study in China.

PubMed

Meng, X H; Zeng, S X; Shi, Jonathan J; Qi, G Y; Zhang, Z B

2014-12-01

Based on a content analysis of 533 Chinese listed companies, this study examines how corporate environmental performance affects not only the level of detail of a company's environmental disclosures, but also what information is disclosed. The results show that (1) both poor and good performers have more disclosure than the median (i.e., "mixed") performers, which provides empirical evidence to support a nonlinear relationship between corporate environmental performance and environmental disclosure; (2) poor performers disclose more soft information on environmental performance than good performers, and good performers disclose more solid information; and (3) although poor performers increase disclosure after being exposed as environmental violators, they avoid disclosing negative environmental information, such as the violation and the associated penalties. This study provides additional evidence for a nonlinear relationship between environmental performance and disclosure in emerging markets, and suggests environmental disclosure may not be a valid signal to differentiate good performers from poor performers in contemporary China. Copyright © 2014 Elsevier Ltd. All rights reserved.

Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites

PubMed Central

Wang, Z.; Georgarakis, K.; Nakayama, K. S.; Li, Y.; Tsarkov, A. A.; Xie, G.; Dudina, D.; Louzguine-Luzgin, D. V.; Yavari, A. R.

2016-01-01

Metallic glass-reinforced metal matrix composites are an emerging class of composite materials. The metallic nature and the high mechanical strength of the reinforcing phase offers unique possibilities for improving the engineering performance of composites. Understanding the structure at the amorphous/crystalline interfaces and the deformation behavior of these composites is of vital importance for their further development and potential application. In the present work, Zr-based metallic glass fibers have been introduced in Al7075 alloy (Al-Zn-Mg-Cu) matrices using spark plasma sintering (SPS) producing composites with low porosity. The addition of metallic glass reinforcements in the Al-based matrix significantly improves the mechanical behavior of the composites in compression. High-resolution TEM observations at the interface reveal the formation of a thin interdiffusion layer able to provide good bonding between the reinforcing phase and the Al-based matrix. The deformation behavior of the composites was studied, indicating that local plastic deformation occurred in the matrix near the glassy reinforcements followed by the initiation and propagation of cracks mainly through the matrix. The reinforcing phase is seen to inhibit the plastic deformation and retard the crack propagation. The findings offer new insights into the mechanical behavior of metal matrix composites reinforced with metallic glasses. PMID:27067824

Can Driving-Simulator Training Enhance Visual Attention, Cognition, and Physical Functioning in Older Adults?

PubMed

Haeger, Mathias; Bock, Otmar; Memmert, Daniel; Hüttermann, Stefanie

2018-01-01

Virtual reality offers a good possibility for the implementation of real-life tasks in a laboratory-based training or testing scenario. Thus, a computerized training in a driving simulator offers an ecological valid training approach. Visual attention had an influence on driving performance, so we used the reverse approach to test the influence of a driving training on visual attention and executive functions. Thirty-seven healthy older participants (mean age: 71.46 ± 4.09; gender: 17 men and 20 women) took part in our controlled experimental study. We examined transfer effects from a four-week driving training (three times per week) on visual attention, executive function, and motor skill. Effects were analyzed using an analysis of variance with repeated measurements. Therefore, main factors were group and time to show training-related benefits of our intervention. Results revealed improvements for the intervention group in divided visual attention; however, there were benefits neither in the other cognitive domains nor in the additional motor task. Thus, there are no broad training-induced transfer effects from such an ecologically valid training regime. This lack of findings could be addressed to insufficient training intensities or a participant-induced bias following the cancelled randomization process.

Simulation-based learning: Just like the real thing

PubMed Central

Lateef, Fatimah

2010-01-01

Simulation is a technique for practice and learning that can be applied to many different disciplines and trainees. It is a technique (not a technology) to replace and amplify real experiences with guided ones, often “immersive” in nature, that evoke or replicate substantial aspects of the real world in a fully interactive fashion. Simulation-based learning can be the way to develop health professionals’ knowledge, skills, and attitudes, whilst protecting patients from unnecessary risks. Simulation-based medical education can be a platform which provides a valuable tool in learning to mitigate ethical tensions and resolve practical dilemmas. Simulation-based training techniques, tools, and strategies can be applied in designing structured learning experiences, as well as be used as a measurement tool linked to targeted teamwork competencies and learning objectives. It has been widely applied in fields such aviation and the military. In medicine, simulation offers good scope for training of interdisciplinary medical teams. The realistic scenarios and equipment allows for retraining and practice till one can master the procedure or skill. An increasing number of health care institutions and medical schools are now turning to simulation-based learning. Teamwork training conducted in the simulated environment may offer an additive benefit to the traditional didactic instruction, enhance performance, and possibly also help reduce errors. PMID:21063557

Simulation-based learning: Just like the real thing.

PubMed

Lateef, Fatimah

2010-10-01

Simulation is a technique for practice and learning that can be applied to many different disciplines and trainees. It is a technique (not a technology) to replace and amplify real experiences with guided ones, often "immersive" in nature, that evoke or replicate substantial aspects of the real world in a fully interactive fashion. Simulation-based learning can be the way to develop health professionals' knowledge, skills, and attitudes, whilst protecting patients from unnecessary risks. Simulation-based medical education can be a platform which provides a valuable tool in learning to mitigate ethical tensions and resolve practical dilemmas. Simulation-based training techniques, tools, and strategies can be applied in designing structured learning experiences, as well as be used as a measurement tool linked to targeted teamwork competencies and learning objectives. It has been widely applied in fields such aviation and the military. In medicine, simulation offers good scope for training of interdisciplinary medical teams. The realistic scenarios and equipment allows for retraining and practice till one can master the procedure or skill. An increasing number of health care institutions and medical schools are now turning to simulation-based learning. Teamwork training conducted in the simulated environment may offer an additive benefit to the traditional didactic instruction, enhance performance, and possibly also help reduce errors.

Cumulative Delivery Rate after Providing Full Reimbursement In Vitro Fertilization Programme: A 6-Years Survey

PubMed Central

Vrtacnik, Urban; Vrtacnik Bokal, Eda

2014-01-01

Since 1983, Slovenia has been offering well-established, successful, and fully reimbursed IVF programme to infertile couples. On the grounds of data gathered at the Slovenian IVF units we aimed to determine whether the fully accessible IVF treatment system can provide notable success considering cumulative delivery rate (cDR). Longitudinal analysis of getting cDR was performed in 810 IVF cycles of 395 couples who for the first time attended the IVF programme in year 2006 and were followed until year 2012. We calculated the actual and the optimistic cDR. In women aged <38 years the actual cDR was 54% and optimistic DR was 83%, respectively. In women aged ≥38 years the actual cDR was 24 % and optimistic cDR was 27%. These results enable us to report that prospects of the treatment for the women aged <38 years, if they undergo all 6 available IVF cycles, are very positive and quite comparable to the chances of spontaneous conception. Even in older patients it is beneficial to repeat the IVF procedures. Therefore we consider the existing infertility treatment system in Slovenia as an example of good medical practice with high level of beneficence offered to the patients. PMID:24734248

A Hopping Good Time: Wood Frogs in the Classroom.

ERIC Educational Resources Information Center

Shimkanin, John; Ulm, Glenn; King, Trina

1998-01-01

Presents a case for using wood frogs to study biology with students. Offers tips on where to find the eggs, how to care for them, what to expect as they hatch, and how to engage students in a study of their stages of development. (DDR)

An Annotated Bibliography for Consumer and Homemaking Education.

ERIC Educational Resources Information Center

Illinois State Board of Vocational Education and Rehabilitation, Springfield. Div. of Vocational and Technical Education.

The materials reviewed for the bibliography may be useful for secondary schools, postsecondary institutions, and adult groups. Listings are offered under seven headings: comprehensive references; the individual consumer in the marketplace and in society; money management; consumer credit; buying goods and services (subdivided into housing; foods;…

Burnout: How to Spot It, How to Avoid It.

ERIC Educational Resources Information Center

Hamann, Donald L.

1990-01-01

Observes that master music teachers' intensity and commitment make them good candidates for burnout. Reports on contributing factors mentioned by music teachers: lack of recognition and support, unclear goals, poor curricular coordination, and poor working conditions. Offers suggestions for combating burnout including exercise, networking with…

Videos as Literature in EFL.

ERIC Educational Resources Information Center

O'Donnell, William A.

Despite the lengthy English language training experienced by most Japanese students, their communicative use of English is not well developed. Videotape recordings of dramas (movies, television programs, and plays) offer a means and an interesting context for developing linguistic knowledge into usable language skills. A good movie provides a…

Job Prospects for Industrial Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1988-01-01

Discusses 1987 statistics from the College Placement Council regarding new job offers to graduating industrial engineers. Identifies trends in hiring in the field. Describes several issues that will face industrial engineers. States that the industrial engineers most likely to win jobs are those with good basic mathematics and communications…

13 CFR 113.3 - Discrimination prohibited.

Code of Federal Regulations, 2010 CFR

2010-01-01

... chapter, recipients of financial assistance may not: (a) Discriminate with regard to goods, services, or accommodations offered or provided by the aided business or other enterprise, whether or not operated for profit... accept a person on a nonsegregated basis as a patient, student, visitor, guest, customer, passenger, or...

8 Things I Wished I Learned in Graduate School.

ERIC Educational Resources Information Center

Jenkins, Lawrence

2001-01-01

Offers suggestions to librarians for enhancing delivery of bibliographic instruction sessions. Includes topics such as "attitude matters more than content,""you may need a coffee bar for librarians,""rigidity is only good for dams,""learning travels up the fingertips," and "they want it convenient." (NB)

BIOLOGICAL EFFECTS AND DOSIMETRY OF STATIC AND ELF (EXTREMELY LOW FREQUENCY) ELECTROMAGNETIC FIELDS

EPA Science Inventory

The book offers a good introduction to the research field for students, as well as a valuable overall review for the experienced investigator. The six chapters on interactions provide concise descriptions of physical processes for natural and man-made environmental exposures and ...

School Community Relations and Resources in Effective Schools.

ERIC Educational Resources Information Center

Michel, George J.

1985-01-01

Discusses resources available to schools operating as open and closed systems. Examines school/community relations and school effectiveness, schools as resource machines, and resources offered by teachers and parents. Stresses that broad concepts of community, good communication, and citizen involvement can utilize resources at high levels of…

12 CFR Supplement I to Part 230 - Official Staff Interpretations

Code of Federal Regulations, 2012 CFR

2012-01-01

... interpretations of Regulation DD. Good faith compliance with this commentary affords protection from liability.... Advertisements include commercial messages in visual, oral, or print media that invite, offer, or otherwise...)), such as an account that receives direct deposit of social security payments. Accounts permitting access...

12 CFR Supplement I to Part 230 - Official Staff Interpretations

Code of Federal Regulations, 2014 CFR

2014-01-01

... interpretations of Regulation DD. Good faith compliance with this commentary affords protection from liability.... Advertisements include commercial messages in visual, oral, or print media that invite, offer, or otherwise...)), such as an account that receives direct deposit of social security payments. Accounts permitting access...

12 CFR Supplement I to Part 230 - Official Staff Interpretations

Code of Federal Regulations, 2013 CFR

2013-01-01

... interpretations of Regulation DD. Good faith compliance with this commentary affords protection from liability.... Advertisements include commercial messages in visual, oral, or print media that invite, offer, or otherwise...)), such as an account that receives direct deposit of social security payments. Accounts permitting access...

Getting There

ERIC Educational Resources Information Center

Violino, Bob

2011-01-01

Few industries are as critical to the U.S. economy as transportation. Skilled automotive, railroad, and airline technicians shuttle the goods and people that drive every aspect of domestic and international commerce. The transportation sector offers some of the most exciting opportunities for workers to address critical issues of this time:…

Can Schools Change Society?

ERIC Educational Resources Information Center

Barker, Bernard

2011-01-01

This article reviews the extent to which effectiveness strategies have compensated for social disadvantage, explores the reasons offered over time for the association between disadvantage and less good student outcomes, and argues that contemporary optimism and pessimism about change and progress relate to a neo-liberal paradigm that has little to…

Are Your Kids Too Tuned In?

ERIC Educational Resources Information Center

De Franco, Ellen B.

1989-01-01

Provides ideas to help parents determine whether their children are spending too much time with electronic media, noting children learn both good and bad from every device they use. Parents are encouraged to offer their children interest, support, and suggestions for alternate ways to spend their time. (SM)

University-Community Engagement in Australia: Practice, Policy and Public Good

ERIC Educational Resources Information Center

Winter, Alexandra; Wiseman, John; Muirhead, Bruce

2006-01-01

The rise of a community engagement movement offers a range of possibilities for universities to function as "sites of citizenship". These include contributing to community social and economic infrastructure, supporting equity and diversity within higher education, and education for democratic citizenship. This article provides an…

Making God real and making God good: some mechanisms through which prayer may contribute to healing.

PubMed

Luhrmann, Tanya Marie

2013-10-01

Many social scientists attribute the health-giving properties of religious practice to social support. This paper argues that another mechanism may be a positive relationship with the supernatural, a proposal that builds upon anthropological accounts of symbolic healing. Such a mechanism depends upon the learned cultivation of the imagination and the capacity to make what is imagined more real and more good. This paper offers a theory of the way that prayer enables this process and provides some evidence, drawn from experimental and ethnographic work, for the claim that a relationship with a loving God, cultivated through the imagination in prayer, may contribute to good health and may contribute to healing in trauma and psychosis.

Switch for Good Community Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawford, Tabitha; Amran, Martha

2013-11-19

Switch4Good is an energy-savings program that helps residents reduce consumption from behavior changes; it was co-developed by Balfour Beatty Military Housing Management (BB) and WattzOn in Phase I of this grant. The program was offered at 11 Navy bases. Three customer engagement strategies were evaluated, and it was found that Digital Nudges (a combination of monthly consumption statements with frequent messaging via text or email) was most cost-effective. The program was delivered on-time and on-budget, and its success is based on the teamwork of local BB staff and the WattzOn team. The following graphic shows Switch4Good “by the numbers”, e.g.more » the scale of operations achieved during Phase I.« less

Luggage and shipped goods.

PubMed

Vogel, H; Haller, D

2007-08-01

Control of luggage and shipped goods are frequently carried out. The possibilities of X-ray technology shall be demonstrated. There are different imaging techniques. The main concepts are transmission imaging, backscatter imaging, computed tomography, and dual energy imaging and the combination of different methods The images come from manufacturers and personal collections. The search concerns mainly, weapons, explosives, and drugs; furthermore animals, and stolen goods, Special problems offer the control of letters and the detection of Improvised Explosive Devices (IED). One has to expect that controls will increase and that imaging with X-rays will have their part. Pattern recognition software will be used for analysis enforced by economy and by demand for higher efficiency - man and computer will produce more security than man alone.

Conflicts between healthcare professionals and families of a multi-ethnic patient population during critical care: an ethnographic study.

PubMed

Van Keer, Rose-Lima; Deschepper, Reginald; Francke, Anneke L; Huyghens, Luc; Bilsen, Johan

2015-12-22

Conflicts during communication in multi-ethnic healthcare settings is an increasing point of concern as a result of societies' increased ethno-cultural diversity. We can expect that conflicts are even more likely to arise in situations where difficult medical decisions have to be made, such as critical medical situations in hospital. However, in-depth research on this topic is rather scarce. During critical care patients are often unable to communicate. We have therefore investigated factors contributing to conflicts between healthcare professionals and family members from ethnic minority groups in critical medical situations in hospital. Ethnographic fieldwork was done in one intensive care unit of a multi-ethnic urban hospital in Belgium over 6 months (January 2014 to June 2014). Data were collected through negotiated interactive observation, in-depth interviews with healthcare professionals, from patients' medical records, and by making notes in a logbook. Data were analysed by using grounded theory procedures. Conflicts were essentially related to differences in participants' views on what constitutes 'good care' based on different care approaches. Healthcare professionals' views on good care were based predominantly on a biomedical care model, whereas families' views on good care were mainly inspired by a holistic lifeworld-oriented approach. Giving good care, from the healthcare professionals' point of view, included great attention to regulations, structured communication, and central decision making. On the other hand, good care from the families' point of view included seeking exhaustive information, and participating in end-of-life decision making. Healthcare professionals' biomedical views on offering good care were strengthened by the features of the critical care context whereas families' holistic views on offering good care were reinforced by the specific characteristics of families' ethno-familial care context, including their different ethno-cultural backgrounds. However, ethno-cultural differences between participants only contributed to conflicts in confrontation with a triggering critical care context. Conflicts cannot be exclusively linked to ethno-cultural differences as structural, functional characteristics of critical care substantially contribute to the development of conflicts. Therefore, effective conflict prevention should not only focus on ethno-cultural differentness but should also take the structural organizational characteristics of the critical care context sufficiently into account.

Evaluation of the online-presence (homepage) of burn units/burn centers in Germany, Austria and Switzerland.

PubMed

Selig, H F; Lumenta, D B; König, C; Andel, H; Kamolz, L P

2012-05-01

A successful online presence is an important key factor in the competition among hospitals today. However, little is known about the internet presence and the quality of websites of burn units on the World Wide Web. The aim was to assess the online presence of hospitals provided by specialized burn units in German speaking countries with a focus on the rate and the performance of actively run websites. A multicenter, observational, cross-sectional study was performed over a period of 1.5 month (October-December 2010). Forty-four burn units were assessed by using a previously generated criteria list. The list included 36 criteria with following topics: "research and teaching"; "patient care"; "clinical emphases", "general information"; "information brokerage". Overall, the websites examined offered a good overview about their different online services with many multimedia-based elements included. All websites consisted of hyperlinks, general multimedia-based elements and information on means of communication with the hospital, respectively. In contrast, the quality of specific information for burn patients was relatively poor. With regard to the need of elderly people, the usability and the layout, the different websites offer a lot of options for future improvements. Burn centers in Germany, Austria and Switzerland already consider the World Wide Web as an important tool for self-promotion and communication. The potential of burn center websites to function as a knowledge base for first aid as well as preventive measurements should be considered and realized in future web site designs. Copyright © 2011 Elsevier Ltd and ISBI. All rights reserved.

Comparison of Bone Preserving and Radical Surgical Treatment in 32 Cases of Calcaneal Osteomyelitis.

PubMed

Babiak, Ireneusz; Pędzisz, Piotr; Kulig, Mateusz; Janowicz, Jakub; Małdyk, Paweł

2016-01-01

Introduction. Radical procedures like calcanectomy and amputation performed for calcaneal osteomyelitis are regarded as effective in eradication of infection even though potentially functionally disabling. Bone sparing procedures offer better functional result at the expense of potentially worse infection control. The aim of the study has been to assess the influence of the surgical radicalism as much as the extent of bone infection on the final outcome in the surgical therapy of chronic calcaneal osteomyelitis (CO). Material and method. 32 patients with chronic CO have comprised the group under study: 8 with superficial type, 12 localised type and 12 with diffuse type according to Cierny-Mader classification. The aim of the treatment was to heal infection, preserve the heel shape and achieve good skin coverage over the calcaneus. The therapy consisted of 9 debridement surgeries with or without flaps, 8 drilling-operations of the calcaneus with application of collagen-gentamicin-sponge in bore holes, 15 partial and 2 total calcanectomies, and 4 below-the knee amputations. Results. The healing of infection and wound has been achieved after 7 of 9 debridements, 6 of 8 drilling-operations, 13 of 15 partial and all total calcanectomies. Conclusion. Bone preserving operations in chronic calcaneal osteomyelitis provided inferior infection control (76,47% vs 88,24%) and worse patient satisfaction (88,24% vs 100%) and almost camparable ambulation (100% vs 93,33%). Drilling of the calcaneus with application of collagen sponge containing gentamicin performed in chronic diffuse calcaneal osteomyelitis seems to offer a viable alternative to partial or radical calcanectomy. V.

Comparison of Bone Preserving and Radical Surgical Treatment in 32 Cases of Calcaneal Osteomyelitis

PubMed Central

Babiak, Ireneusz; Pędzisz, Piotr; Kulig, Mateusz; Janowicz, Jakub; Małdyk, Paweł

2016-01-01

Introduction. Radical procedures like calcanectomy and amputation performed for calcaneal osteomyelitis are regarded as effective in eradication of infection even though potentially functionally disabling. Bone sparing procedures offer better functional result at the expense of potentially worse infection control. The aim of the study has been to assess the influence of the surgical radicalism as much as the extent of bone infection on the final outcome in the surgical therapy of chronic calcaneal osteomyelitis (CO). Material and method. 32 patients with chronic CO have comprised the group under study: 8 with superficial type, 12 localised type and 12 with diffuse type according to Cierny-Mader classification. The aim of the treatment was to heal infection, preserve the heel shape and achieve good skin coverage over the calcaneus. The therapy consisted of 9 debridement surgeries with or without flaps, 8 drilling-operations of the calcaneus with application of collagen-gentamicin-sponge in bore holes, 15 partial and 2 total calcanectomies, and 4 below-the knee amputations. Results. The healing of infection and wound has been achieved after 7 of 9 debridements, 6 of 8 drilling-operations, 13 of 15 partial and all total calcanectomies. Conclusion. Bone preserving operations in chronic calcaneal osteomyelitis provided inferior infection control (76,47% vs 88,24%) and worse patient satisfaction (88,24% vs 100%) and almost camparable ambulation (100% vs 93,33%). Drilling of the calcaneus with application of collagen sponge containing gentamicin performed in chronic diffuse calcaneal osteomyelitis seems to offer a viable alternative to partial or radical calcanectomy. Level of evidence: V. PMID:28529846

Stature estimation equations for South Asian skeletons based on DXA scans of contemporary adults.

PubMed

Pomeroy, Emma; Mushrif-Tripathy, Veena; Wells, Jonathan C K; Kulkarni, Bharati; Kinra, Sanjay; Stock, Jay T

2018-05-03

Stature estimation from the skeleton is a classic anthropological problem, and recent years have seen the proliferation of population-specific regression equations. Many rely on the anatomical reconstruction of stature from archaeological skeletons to derive regression equations based on long bone lengths, but this requires a collection with very good preservation. In some regions, for example, South Asia, typical environmental conditions preclude the sufficient preservation of skeletal remains. Large-scale epidemiological studies that include medical imaging of the skeleton by techniques such as dual-energy X-ray absorptiometry (DXA) offer new potential datasets for developing such equations. We derived estimation equations based on known height and bone lengths measured from DXA scans from the Andhra Pradesh Children and Parents Study (Hyderabad, India). Given debates on the most appropriate regression model to use, multiple methods were compared, and the performance of the equations was tested on a published skeletal dataset of individuals with known stature. The equations have standard errors of estimates and prediction errors similar to those derived using anatomical reconstruction or from cadaveric datasets. As measured by the number of significant differences between true and estimated stature, and the prediction errors, the new equations perform as well as, and generally better than, published equations commonly used on South Asian skeletons or based on Indian cadaveric datasets. This study demonstrates the utility of DXA scans as a data source for developing stature estimation equations and offer a new set of equations for use with South Asian datasets. © 2018 Wiley Periodicals, Inc.

FPGA implementation for real-time background subtraction based on Horprasert model.

PubMed

Rodriguez-Gomez, Rafael; Fernandez-Sanchez, Enrique J; Diaz, Javier; Ros, Eduardo

2012-01-01

Background subtraction is considered the first processing stage in video surveillance systems, and consists of determining objects in movement in a scene captured by a static camera. It is an intensive task with a high computational cost. This work proposes an embedded novel architecture on FPGA which is able to extract the background on resource-limited environments and offers low degradation (produced because of the hardware-friendly model modification). In addition, the original model is extended in order to detect shadows and improve the quality of the segmentation of the moving objects. We have analyzed the resource consumption and performance in Spartan3 Xilinx FPGAs and compared to others works available on the literature, showing that the current architecture is a good trade-off in terms of accuracy, performance and resources utilization. With less than a 65% of the resources utilization of a XC3SD3400 Spartan-3A low-cost family FPGA, the system achieves a frequency of 66.5 MHz reaching 32.8 fps with resolution 1,024 × 1,024 pixels, and an estimated power consumption of 5.76 W.

Enhancing the Capacitive Performance of Electric Double-Layer Capacitors with Ionic Liquid Mixtures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lian, C.; Liu, K.; Van Aken, Katherine L.

Formulating room-temperature ionic liquid (RTIL) mixed electrolytes was recently proposed as an effective and convenient strategy to increase the capacitive performance of electrochemical capacitors. In this paper, we investigate the electrical double-layer (EDL) structure and the capacitance of two RTILs, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMI-TFSI) and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF 4), and their mixtures with onion-like carbon electrodes using experiment and classical density functional theory. The principal difference between these ionic liquids is the smaller diameter of the BF 4 – anion relative to the TFSI – anion and the EMI + cation. A volcano-shaped trend is identified for the capacitance versus themore » composition of the RTIL mixture. The mixture effect, which makes more counterions pack on and more co-ions leave from the electrode surface, leads to an increase of the counterion density within the EDL and thus a larger capacitance. Finally, these theoretical predictions are in good agreement with our experimental observations and offer guidance for designing RTIL mixtures for EDL supercapacitors.« less

A wireless sensor network based personnel positioning scheme in coal mines with blind areas.

PubMed

Liu, Zhigao; Li, Chunwen; Wu, Danchen; Dai, Wenhan; Geng, Shaobo; Ding, Qingqing

2010-01-01

This paper proposes a novel personnel positioning scheme for a tunnel network with blind areas, which compared with most existing schemes offers both low-cost and high-precision. Based on the data models of tunnel networks, measurement networks and mobile miners, the global positioning method is divided into four steps: (1) calculate the real time personnel location in local areas using a location engine, and send it to the upper computer through the gateway; (2) correct any localization errors resulting from the underground tunnel environmental interference; (3) determine the global three-dimensional position by coordinate transformation; (4) estimate the personnel locations in the blind areas. A prototype system constructed to verify the positioning performance shows that the proposed positioning system has good reliability, scalability, and positioning performance. In particular, the static localization error of the positioning system is less than 2.4 m in the underground tunnel environment and the moving estimation error is below 4.5 m in the corridor environment. The system was operated continuously over three months without any failures.

Inferring Human Activity Recognition with Ambient Sound on Wireless Sensor Nodes.

PubMed

Salomons, Etto L; Havinga, Paul J M; van Leeuwen, Henk

2016-09-27

A wireless sensor network that consists of nodes with a sound sensor can be used to obtain context awareness in home environments. However, the limited processing power of wireless nodes offers a challenge when extracting features from the signal, and subsequently, classifying the source. Although multiple papers can be found on different methods of sound classification, none of these are aimed at limited hardware or take the efficiency of the algorithms into account. In this paper, we compare and evaluate several classification methods on a real sensor platform using different feature types and classifiers, in order to find an approach that results in a good classifier that can run on limited hardware. To be as realistic as possible, we trained our classifiers using sound waves from many different sources. We conclude that despite the fact that the classifiers are often of low quality due to the highly restricted hardware resources, sufficient performance can be achieved when (1) the window length for our classifiers is increased, and (2) if we apply a two-step approach that uses a refined classification after a global classification has been performed.

Wearable Biomedical Measurement Systems for Assessment of Mental Stress of Combatants in Real Time

PubMed Central

Seoane, Fernando; Mohino-Herranz, Inmaculada; Ferreira, Javier; Alvarez, Lorena; Buendia, Ruben; Ayllón, David; Llerena, Cosme; Gil-Pita, Roberto

2014-01-01

The Spanish Ministry of Defense, through its Future Combatant program, has sought to develop technology aids with the aim of extending combatants' operational capabilities. Within this framework the ATREC project funded by the “Coincidente” program aims at analyzing diverse biometrics to assess by real time monitoring the stress levels of combatants. This project combines multidisciplinary disciplines and fields, including wearable instrumentation, textile technology, signal processing, pattern recognition and psychological analysis of the obtained information. In this work the ATREC project is described, including the different execution phases, the wearable biomedical measurement systems, the experimental setup, the biomedical signal analysis and speech processing performed. The preliminary results obtained from the data analysis collected during the first phase of the project are presented, indicating the good classification performance exhibited when using features obtained from electrocardiographic recordings and electrical bioimpedance measurements from the thorax. These results suggest that cardiac and respiration activity offer better biomarkers for assessment of stress than speech, galvanic skin response or skin temperature when recorded with wearable biomedical measurement systems. PMID:24759113

Sunlight Responsive Thermochromic Window System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Millett, F,A; Byker,H, J

2006-10-27

Pleotint has embarked on a novel approach with our Sunlight Responsive Thermochromic, SRT™, windows. We are integrating dynamic sunlight control, high insulation values and low solar heat gain together in a high performance window. The Pleotint SRT window is dynamic because it reversibly changes light transmission based on thermochromics activated directly by the heating effect of sunlight. We can achieve a window package with low solar heat gain coefficient (SHGC), a low U value and high insulation. At the same time our windows provide good daylighting. Our innovative window design offers architects and building designers the opportunity to choose theirmore » desired energy performance, excellent sound reduction, external pane can be self-cleaning, or a resistance to wind load, blasts, bullets or hurricanes. SRT windows would provide energy savings that are estimated at up to 30% over traditional window systems. Glass fabricators will be able to use existing equipment to make the SRT window while adding value and flexibility to the basic design. Glazing installers will have the ability to fit the windows with traditional methods without wires, power supplies and controllers. SRT windows can be retrofit into existing buildings,« less

Chemical modification of graphene aerogels for electrochemical capacitor applications.

PubMed

Hong, Jin-Yong; Wie, Jeong Jae; Xu, Yu; Park, Ho Seok

2015-12-14

Graphene aerogel is a relatively new type of aerogel that is ideal for energy storage applications because of its large surface area, high electrical conductivity and good chemical stability. Also, three dimensional interconnected macropores offer many advantages such as low density, fast ion and mass transfer, and easy access to storage sites. Such features allow graphene aerogels to be intensively applied for electrochemical capacitor applications. Despite the growing interest in graphene aerogel-based electrochemical capacitors, however, the graphene aerogels still suffer from their low capacitive performances and high fragility. Both relatively low capacitance and brittleness of physically crosslinked graphene aerogels remain a critical challenge. Until now, a number of alternative attempts have been devoted to overcome these shortcomings. In this perspective, we summarize the recent research progress towards the development of advanced graphene aerogel-based electrochemical capacitors according to the different approaches (e.g. porosity, composition and structure controls). Then, the recently proposed chemical strategies to improve the capacitive performances and mechanical durability of graphene aerogels for practical applications are highlighted. Finally, the current challenges and perspectives in this emerging material are also discussed.