Open source and open content: A framework for global collaboration in social-ecological research

Treesearch

Charles Schweik; Tom Evans; J. Morgan Grove

2005-01-01

This paper discusses opportunities for alternative collaborative approaches for social-ecological research in general and, in this context, for modeling land-use/land-cover change. In this field, the rate of progress in academic research is steady but perhaps not as rapid or efficient as might be possible with alternative organizational frameworks. The convergence of...

Of Birkenstocks and Wingtips: Open Source Licenses

ERIC Educational Resources Information Center

Gandel, Paul B.; Wheeler, Brad

2005-01-01

The notion of collaborating to create open source applications for higher education is rapidly gaining momentum. From course management systems to ERP financial systems, higher education institutions are working together to explore whether they can in fact build a better mousetrap. As Lois Brooks, of Stanford University, recently observed, the…

The 2016 Bioinformatics Open Source Conference (BOSC).

PubMed

Harris, Nomi L; Cock, Peter J A; Chapman, Brad; Fields, Christopher J; Hokamp, Karsten; Lapp, Hilmar; Muñoz-Torres, Monica; Wiencko, Heather

2016-01-01

Message from the ISCB: The Bioinformatics Open Source Conference (BOSC) is a yearly meeting organized by the Open Bioinformatics Foundation (OBF), a non-profit group dedicated to promoting the practice and philosophy of Open Source software development and Open Science within the biological research community. BOSC has been run since 2000 as a two-day Special Interest Group (SIG) before the annual ISMB conference. The 17th annual BOSC ( http://www.open-bio.org/wiki/BOSC_2016) took place in Orlando, Florida in July 2016. As in previous years, the conference was preceded by a two-day collaborative coding event open to the bioinformatics community. The conference brought together nearly 100 bioinformatics researchers, developers and users of open source software to interact and share ideas about standards, bioinformatics software development, and open and reproducible science.

An informatics model for guiding assembly of telemicrobiology workstations for malaria collaborative diagnostics using commodity products and open-source software.

PubMed

Suhanic, West; Crandall, Ian; Pennefather, Peter

2009-07-17

Deficits in clinical microbiology infrastructure exacerbate global infectious disease burdens. This paper examines how commodity computation, communication, and measurement products combined with open-source analysis and communication applications can be incorporated into laboratory medicine microbiology protocols. Those commodity components are all now sourceable globally. An informatics model is presented for guiding the use of low-cost commodity components and free software in the assembly of clinically useful and usable telemicrobiology workstations. The model incorporates two general principles: 1) collaborative diagnostics, where free and open communication and networking applications are used to link distributed collaborators for reciprocal assistance in organizing and interpreting digital diagnostic data; and 2) commodity engineering, which leverages globally available consumer electronics and open-source informatics applications, to build generic open systems that measure needed information in ways substantially equivalent to more complex proprietary systems. Routine microscopic examination of Giemsa and fluorescently stained blood smears for diagnosing malaria is used as an example to validate the model. The model is used as a constraint-based guide for the design, assembly, and testing of a functioning, open, and commoditized telemicroscopy system that supports distributed acquisition, exploration, analysis, interpretation, and reporting of digital microscopy images of stained malarial blood smears while also supporting remote diagnostic tracking, quality assessment and diagnostic process development. The open telemicroscopy workstation design and use-process described here can address clinical microbiology infrastructure deficits in an economically sound and sustainable manner. It can boost capacity to deal with comprehensive measurement of disease and care outcomes in individuals and groups in a distributed and collaborative fashion. The workstation enables local control over the creation and use of diagnostic data, while allowing for remote collaborative support of diagnostic data interpretation and tracking. It can enable global pooling of malaria disease information and the development of open, participatory, and adaptable laboratory medicine practices. The informatic model highlights how the larger issue of access to generic commoditized measurement, information processing, and communication technology in both high- and low-income countries can enable diagnostic services that are much less expensive, but substantially equivalent to those currently in use in high-income countries.

A Stigmergy Collaboration Approach in the Open Source Software Developer Community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cui, Xiaohui; Pullum, Laura L; Treadwell, Jim N

2009-01-01

The communication model of some self-organized online communities is significantly different from the traditional social network based community. It is problematic to use social network analysis to analyze the collaboration structure and emergent behaviors in these communities because these communities lack peer-to-peer connections. Stigmergy theory provides an explanation of the collaboration model of these communities. In this research, we present a stigmergy approach for building an agent-based simulation to simulate the collaboration model in the open source software (OSS) developer community. We used a group of actors who collaborate on OSS projects through forums as our frame of reference andmore » investigated how the choices actors make in contributing their work on the projects determines the global status of the whole OSS project. In our simulation, the forum posts serve as the digital pheromone and the modified Pierre-Paul Grasse pheromone model is used for computing the developer agents behavior selection probability.« less

Human factors for capacity building: lessons learned from the OpenMRS implementers network.

PubMed

Seebregts, C J; Mamlin, B W; Biondich, P G; Fraser, H S F; Wolfe, B A; Jazayeri, D; Miranda, J; Blaya, J; Sinha, C; Bailey, C T; Kanter, A S

2010-01-01

The overall objective of this project was to investigate ways to strengthen the OpenMRS community by (i) developing capacity and implementing a network focusing specifically on the needs of OpenMRS implementers, (ii) strengthening community-driven aspects of OpenMRS and providing a dedicated forum for implementation-specific issues, and; (iii) providing regional support for OpenMRS implementations as well as mentorship and training. The methods used included (i) face-to-face networking using meetings and workshops; (ii) online collaboration tools, peer support and mentorship programmes; (iii) capacity and community development programmes, and; (iv) community outreach programmes. The community-driven approach, combined with a few simple interventions, has been a key factor in the growth and success of the OpenMRS Implementers Network. It has contributed to implementations in at least twenty-three different countries using basic online tools; and provided mentorship and peer support through an annual meeting, workshops and an internship program. The OpenMRS Implementers Network has formed collaborations with several other open source networks and is evolving regional OpenMRS Centres of Excellence to provide localized support for OpenMRS development and implementation. These initiatives are increasing the range of functionality and sustainability of open source software in the health domain, resulting in improved adoption and enterprise-readiness. Social organization and capacity development activities are important in growing a successful community-driven open source software model.

The 2016 Bioinformatics Open Source Conference (BOSC)

PubMed Central

Harris, Nomi L.; Cock, Peter J.A.; Chapman, Brad; Fields, Christopher J.; Hokamp, Karsten; Lapp, Hilmar; Muñoz-Torres, Monica; Wiencko, Heather

2016-01-01

Message from the ISCB: The Bioinformatics Open Source Conference (BOSC) is a yearly meeting organized by the Open Bioinformatics Foundation (OBF), a non-profit group dedicated to promoting the practice and philosophy of Open Source software development and Open Science within the biological research community. BOSC has been run since 2000 as a two-day Special Interest Group (SIG) before the annual ISMB conference. The 17th annual BOSC ( http://www.open-bio.org/wiki/BOSC_2016) took place in Orlando, Florida in July 2016. As in previous years, the conference was preceded by a two-day collaborative coding event open to the bioinformatics community. The conference brought together nearly 100 bioinformatics researchers, developers and users of open source software to interact and share ideas about standards, bioinformatics software development, and open and reproducible science. PMID:27781083

Open-Source Development of the Petascale Reactive Flow and Transport Code PFLOTRAN

NASA Astrophysics Data System (ADS)

Hammond, G. E.; Andre, B.; Bisht, G.; Johnson, T.; Karra, S.; Lichtner, P. C.; Mills, R. T.

2013-12-01

Open-source software development has become increasingly popular in recent years. Open-source encourages collaborative and transparent software development and promotes unlimited free redistribution of source code to the public. Open-source development is good for science as it reveals implementation details that are critical to scientific reproducibility, but generally excluded from journal publications. In addition, research funds that would have been spent on licensing fees can be redirected to code development that benefits more scientists. In 2006, the developers of PFLOTRAN open-sourced their code under the U.S. Department of Energy SciDAC-II program. Since that time, the code has gained popularity among code developers and users from around the world seeking to employ PFLOTRAN to simulate thermal, hydraulic, mechanical and biogeochemical processes in the Earth's surface/subsurface environment. PFLOTRAN is a massively-parallel subsurface reactive multiphase flow and transport simulator designed from the ground up to run efficiently on computing platforms ranging from the laptop to leadership-class supercomputers, all from a single code base. The code employs domain decomposition for parallelism and is founded upon the well-established and open-source parallel PETSc and HDF5 frameworks. PFLOTRAN leverages modern Fortran (i.e. Fortran 2003-2008) in its extensible object-oriented design. The use of this progressive, yet domain-friendly programming language has greatly facilitated collaboration in the code's software development. Over the past year, PFLOTRAN's top-level data structures were refactored as Fortran classes (i.e. extendible derived types) to improve the flexibility of the code, ease the addition of new process models, and enable coupling to external simulators. For instance, PFLOTRAN has been coupled to the parallel electrical resistivity tomography code E4D to enable hydrogeophysical inversion while the same code base can be used as a third-party library to provide hydrologic flow, energy transport, and biogeochemical capability to the community land model, CLM, part of the open-source community earth system model (CESM) for climate. In this presentation, the advantages and disadvantages of open source software development in support of geoscience research at government laboratories, universities, and the private sector are discussed. Since the code is open-source (i.e. it's transparent and readily available to competitors), the PFLOTRAN team's development strategy within a competitive research environment is presented. Finally, the developers discuss their approach to object-oriented programming and the leveraging of modern Fortran in support of collaborative geoscience research as the Fortran standard evolves among compiler vendors.

Free/Libre Open Source Software Implementation in Schools: Evidence from the Field and Implications for the Future

ERIC Educational Resources Information Center

Lin, Yu-Wei; Zini, Enrico

2008-01-01

This empirical paper shows how free/libre open source software (FLOSS) contributes to mutual and collaborative learning in an educational environment. Unlike proprietary software, FLOSS allows extensive customisation of software to support the needs of local users better. This also allows users to participate more proactively in the development…

Open Source and These United States

DTIC Science & Technology

1999-04-01

the ability of all participants to freely access the source code and keep abreast of progress. There can be no information hoarding on an open source... developed in this way depends upon ready and reliable communications. Just as the internet has increased the ability of people to exchange information...investment is maximized through long use and reuse. This process results in systems which harnesses the collaborative abilities of its user developers

Leveraging human oversight and intervention in large-scale parallel processing of open-source data

NASA Astrophysics Data System (ADS)

Casini, Enrico; Suri, Niranjan; Bradshaw, Jeffrey M.

2015-05-01

The popularity of cloud computing along with the increased availability of cheap storage have led to the necessity of elaboration and transformation of large volumes of open-source data, all in parallel. One way to handle such extensive volumes of information properly is to take advantage of distributed computing frameworks like Map-Reduce. Unfortunately, an entirely automated approach that excludes human intervention is often unpredictable and error prone. Highly accurate data processing and decision-making can be achieved by supporting an automatic process through human collaboration, in a variety of environments such as warfare, cyber security and threat monitoring. Although this mutual participation seems easily exploitable, human-machine collaboration in the field of data analysis presents several challenges. First, due to the asynchronous nature of human intervention, it is necessary to verify that once a correction is made, all the necessary reprocessing is done in chain. Second, it is often needed to minimize the amount of reprocessing in order to optimize the usage of resources due to limited availability. In order to improve on these strict requirements, this paper introduces improvements to an innovative approach for human-machine collaboration in the processing of large amounts of open-source data in parallel.

Openly Published Environmental Sensing (OPEnS) | Advancing Open-Source Research, Instrumentation, and Dissemination

NASA Astrophysics Data System (ADS)

Udell, C.; Selker, J. S.

2017-12-01

The increasing availability and functionality of Open-Source software and hardware along with 3D printing, low-cost electronics, and proliferation of open-access resources for learning rapid prototyping are contributing to fundamental transformations and new technologies in environmental sensing. These tools invite reevaluation of time-tested methodologies and devices toward more efficient, reusable, and inexpensive alternatives. Building upon Open-Source design facilitates community engagement and invites a Do-It-Together (DIT) collaborative framework for research where solutions to complex problems may be crowd-sourced. However, barriers persist that prevent researchers from taking advantage of the capabilities afforded by open-source software, hardware, and rapid prototyping. Some of these include: requisite technical skillsets, knowledge of equipment capabilities, identifying inexpensive sources for materials, money, space, and time. A university MAKER space staffed by engineering students to assist researchers is one proposed solution to overcome many of these obstacles. This presentation investigates the unique capabilities the USDA-funded Openly Published Environmental Sensing (OPEnS) Lab affords researchers, within Oregon State and internationally, and the unique functions these types of initiatives support at the intersection of MAKER spaces, Open-Source academic research, and open-access dissemination.

The Role of Semantics in Open-World, Integrative, Collaborative Science Data Platforms

NASA Astrophysics Data System (ADS)

Fox, Peter; Chen, Yanning; Wang, Han; West, Patrick; Erickson, John; Ma, Marshall

2014-05-01

As collaborative science spreads into more and more Earth and space science fields, both participants and funders are expressing stronger needs for highly functional data and information capabilities. Characteristics include a) easy to use, b) highly integrated, c) leverage investments, d) accommodate rapid technical change, and e) do not incur undue expense or time to build or maintain - these are not a small set of requirements. Based on our accumulated experience over the last ~ decade and several key technical approaches, we adapt, extend, and integrate several open source applications and frameworks to handle major portions of functionality for these platforms. This includes: an object-type repository, collaboration tools, identity management, all within a portal managing diverse content and applications. In this contribution, we present our methods and results of information models, adaptation, integration and evolution of a networked data science architecture based on several open source technologies (Drupal, VIVO, the Comprehensive Knowledge Archive Network; CKAN, and the Global Handle System; GHS). In particular we present the Deep Carbon Observatory - a platform for international science collaboration. We present and discuss key functional and non-functional attributes, and discuss the general applicability of the platform.

Assessing Intelligence Operation/Fusion/Coordination Centers for Efficiency Opportunities

DTIC Science & Technology

2013-02-28

intelligence ], HUMINT [human intelligence ], GEOINT [geospatial intelligence ], or even open source information into the NIC-C. There is no...centers have and continue to be stood up to improve the collaboration across intelligence organizatons addressing national security threats. Open ... source review of journals and books describing changes in the intelligence community organizational structure since September 2001, were reviewed to

Towards Cross-Organizational Innovative Business Process Interoperability Services

NASA Astrophysics Data System (ADS)

Karacan, Ömer; Del Grosso, Enrico; Carrez, Cyril; Taglino, Francesco

This paper presents the vision and initial results of the COIN (FP7-IST-216256) European project for the development of open source Collaborative Business Process Interoperability (CBPip) in cross-organisational business collaboration environments following the Software-as-a-Service Utility (SaaS-U) paradigm.

OpenStreetMap Collaborative Prototype, Phase 1

USGS Publications Warehouse

Wolf, Eric B.; Matthews, Greg D.; McNinch, Kevin; Poore, Barbara S.

2011-01-01

Phase One of the OpenStreetMap Collaborative Prototype (OSMCP) attempts to determine if the open source software developed for the OpenStreetMap (OSM, http://www.openstreetmap.org) can be used for data contributions and improvements that meet or exceed the requirements for integration into The National Map (http://www.nationalmap.gov). OpenStreetMap Collaborative Prototype Phase One focused on road data aggregated at the state level by the Kansas Data Access and Support Center (DASC). Road data from the DASC were loaded into a system hosted by the U.S. Geological Survey (USGS) National Geospatial Technical Operations Center (NGTOC) in Rolla, Missouri. U.S. Geological Survey editing specifications were developed by NGTOC personnel (J. Walters and G. Matthews, USGS, unpub. report, 2010). Interstate and U.S. Highways in the dataset were edited to the specifications by NGTOC personnel while State roads were edited by DASC personnel. Resulting data were successfully improved to meet standards for The National Map once the system and specifications were in place. The OSM software proved effective in providing a usable platform for collaborative data editing

AWOB: A Collaborative Workbench for Astronomers

NASA Astrophysics Data System (ADS)

Kim, J. W.; Lemson, G.; Bulatovic, N.; Makarenko, V.; Vogler, A.; Voges, W.; Yao, Y.; Kiefl, R.; Koychev, S.

2015-09-01

We present the Astronomers Workbench (AWOB1), a web-based collaboration and publication platform for a scientific project of any size, developed in collaboration between the Max-Planck institutes of Astrophysics (MPA) and Extra-terrestrial Physics (MPE) and the Max-Planck Digital Library (MPDL). AWOB facilitates the collaboration between geographically distributed astronomers working on a common project throughout its whole scientific life cycle. AWOB does so by making it very easy for scientists to set up and manage a collaborative workspace for individual projects, where data can be uploaded and shared. It supports inviting project collaborators, provides wikis, automated mailing lists, calendars and event notification and has a built in chat facility. It allows the definition and tracking of tasks within projects and supports easy creation of e-publications for the dissemination of data and images and other resources that cannot be added to submitted papers. AWOB extends the project concept to larger scale consortia, within which it is possible to manage working groups and sub-projects. The existing AWOB instance has so far been limited to Max-Planck members and their collaborators, but will be opened to the whole astronomical community. AWOB is an open-source project and its source code is available upon request. We intend to extend AWOB's functionality also to other disciplines, and would greatly appreciate contributions from the community.

Accessible Collaborative Learning Using Mobile Devices

ERIC Educational Resources Information Center

Wald, Mike; Li, Yunjia; Draffan, E. A.

2014-01-01

This paper describes accessible collaborative learning using mobile devices with mobile enhancements to Synote, the freely available, award winning, open source, web based application that makes web hosted recordings easier to access, search, manage, and exploit for all learners, teachers and other users. Notes taken live during lectures using…

OpenFLUID: an open-source software environment for modelling fluxes in landscapes

NASA Astrophysics Data System (ADS)

Fabre, Jean-Christophe; Rabotin, Michaël; Crevoisier, David; Libres, Aline; Dagès, Cécile; Moussa, Roger; Lagacherie, Philippe; Raclot, Damien; Voltz, Marc

2013-04-01

Integrative landscape functioning has become a common concept in environmental management. Landscapes are complex systems where many processes interact in time and space. In agro-ecosystems, these processes are mainly physical processes, including hydrological-processes, biological processes and human activities. Modelling such systems requires an interdisciplinary approach, coupling models coming from different disciplines, developed by different teams. In order to support collaborative works, involving many models coupled in time and space for integrative simulations, an open software modelling platform is a relevant answer. OpenFLUID is an open source software platform for modelling landscape functioning, mainly focused on spatial fluxes. It provides an advanced object-oriented architecture allowing to i) couple models developed de novo or from existing source code, and which are dynamically plugged to the platform, ii) represent landscapes as hierarchical graphs, taking into account multi-scale, spatial heterogeneities and landscape objects connectivity, iii) run and explore simulations in many ways : using the OpenFLUID software interfaces for users (command line interface, graphical user interface), or using external applications such as GNU R through the provided ROpenFLUID package. OpenFLUID is developed in C++ and relies on open source libraries only (Boost, libXML2, GLib/GTK, OGR/GDAL, …). For modelers and developers, OpenFLUID provides a dedicated environment for model development, which is based on an open source toolchain, including the Eclipse editor, the GCC compiler and the CMake build system. OpenFLUID is distributed under the GPLv3 open source license, with a special exception allowing to plug existing models licensed under any license. It is clearly in the spirit of sharing knowledge and favouring collaboration in a community of modelers. OpenFLUID has been involved in many research applications, such as modelling of hydrological network transfer, diagnosis and prediction of water quality taking into account human activities, study of the effect of spatial organization on hydrological fluxes, modelling of surface-subsurface water exchanges, … At LISAH research unit, OpenFLUID is the supporting development platform of the MHYDAS model, which is a distributed model for agrosystems (Moussa et al., 2002, Hydrological Processes, 16, 393-412). OpenFLUID web site : http://www.openfluid-project.org

Developing an Open Source, Reusable Platform for Distributed Collaborative Information Management in the Early Detection Research Network

NASA Technical Reports Server (NTRS)

Hart, Andrew F.; Verma, Rishi; Mattmann, Chris A.; Crichton, Daniel J.; Kelly, Sean; Kincaid, Heather; Hughes, Steven; Ramirez, Paul; Goodale, Cameron; Anton, Kristen;

OntoMaton: a bioportal powered ontology widget for Google Spreadsheets.

PubMed

Maguire, Eamonn; González-Beltrán, Alejandra; Whetzel, Patricia L; Sansone, Susanna-Assunta; Rocca-Serra, Philippe

2013-02-15

Data collection in spreadsheets is ubiquitous, but current solutions lack support for collaborative semantic annotation that would promote shared and interdisciplinary annotation practices, supporting geographically distributed players. OntoMaton is an open source solution that brings ontology lookup and tagging capabilities into a cloud-based collaborative editing environment, harnessing Google Spreadsheets and the NCBO Web services. It is a general purpose, format-agnostic tool that may serve as a component of the ISA software suite. OntoMaton can also be used to assist the ontology development process. OntoMaton is freely available from Google widgets under the CPAL open source license; documentation and examples at: https://github.com/ISA-tools/OntoMaton.

Teaching, Doing, and Sharing Project Management in a Studio Environment: The Development of an Instructional Design Open-Source Project Management Textbook

ERIC Educational Resources Information Center

Randall, Daniel L.; Johnson, Jacquelyn C.; West, Richard E.; Wiley, David A.

2013-01-01

In this article, the authors present an example of a project-based course within a studio environment that taught collaborative innovation skills and produced an open-source project management textbook for the field of instructional design and technology. While innovation plays an important role in our economy, and many have studied how to teach…

An Empirical Verification of a-priori Learning Models on Mailing Archives in the Context of Online Learning Activities of Participants in Free\\Libre Open Source Software (FLOSS) Communities

ERIC Educational Resources Information Center

Mukala, Patrick; Cerone, Antonio; Turini, Franco

2017-01-01

Free\\Libre Open Source Software (FLOSS) environments are increasingly dubbed as learning environments where practical software engineering skills can be acquired. Numerous studies have extensively investigated how knowledge is acquired in these environments through a collaborative learning model that define a learning process. Such a learning…

Open Source Drug Discovery in Practice: A Case Study

PubMed Central

Årdal, Christine; Røttingen, John-Arne

2012-01-01

Background Open source drug discovery offers potential for developing new and inexpensive drugs to combat diseases that disproportionally affect the poor. The concept borrows two principle aspects from open source computing (i.e., collaboration and open access) and applies them to pharmaceutical innovation. By opening a project to external contributors, its research capacity may increase significantly. To date there are only a handful of open source R&D projects focusing on neglected diseases. We wanted to learn from these first movers, their successes and failures, in order to generate a better understanding of how a much-discussed theoretical concept works in practice and may be implemented. Methodology/Principal Findings A descriptive case study was performed, evaluating two specific R&D projects focused on neglected diseases. CSIR Team India Consortium's Open Source Drug Discovery project (CSIR OSDD) and The Synaptic Leap's Schistosomiasis project (TSLS). Data were gathered from four sources: interviews of participating members (n = 14), a survey of potential members (n = 61), an analysis of the websites and a literature review. Both cases have made significant achievements; however, they have done so in very different ways. CSIR OSDD encourages international collaboration, but its process facilitates contributions from mostly Indian researchers and students. Its processes are formal with each task being reviewed by a mentor (almost always offline) before a result is made public. TSLS, on the other hand, has attracted contributors internationally, albeit significantly fewer than CSIR OSDD. Both have obtained funding used to pay for access to facilities, physical resources and, at times, labor costs. TSLS releases its results into the public domain, whereas CSIR OSDD asserts ownership over its results. Conclusions/Significance Technically TSLS is an open source project, whereas CSIR OSDD is a crowdsourced project. However, both have enabled high quality research at low cost. The critical success factors appear to be clearly defined entry points, transparency and funding to cover core material costs. PMID:23029588

Open Source Paradigm: A Synopsis of The Cathedral and the Bazaar for Health and Social Care.

PubMed

Benson, Tim

2016-07-04

Open source software (OSS) is becoming more fashionable in health and social care, although the ideas are not new. However progress has been slower than many had expected. The purpose is to summarise the Free/Libre Open Source Software (FLOSS) paradigm in terms of what it is, how it impacts users and software engineers and how it can work as a business model in health and social care sectors. Much of this paper is a synopsis of Eric Raymond's seminal book The Cathedral and the Bazaar, which was the first comprehensive description of the open source ecosystem, set out in three long essays. Direct quotes from the book are used liberally, without reference to specific passages. The first part contrasts open and closed source approaches to software development and support. The second part describes the culture and practices of the open source movement. The third part considers business models. A key benefit of open source is that users can access and collaborate on improving the software if they wish. Closed source code may be regarded as a strategic business risk that that may be unacceptable if there is an open source alternative. The sharing culture of the open source movement fits well with that of health and social care.

Reflections on the role of open source in health information system interoperability.

PubMed

Sfakianakis, S; Chronaki, C E; Chiarugi, F; Conforti, F; Katehakis, D G

2007-01-01

This paper reflects on the role of open source in health information system interoperability. Open source is a driving force in computer science research and the development of information systems. It facilitates the sharing of information and ideas, enables evolutionary development and open collaborative testing of code, and broadens the adoption of interoperability standards. In health care, information systems have been developed largely ad hoc following proprietary specifications and customized design. However, the wide deployment of integrated services such as Electronic Health Records (EHRs) over regional health information networks (RHINs) relies on interoperability of the underlying information systems and medical devices. This reflection is built on the experiences of the PICNIC project that developed shared software infrastructure components in open source for RHINs and the OpenECG network that offers open source components to lower the implementation cost of interoperability standards such as SCP-ECG, in electrocardiography. Open source components implementing standards and a community providing feedback from real-world use are key enablers of health care information system interoperability. Investing in open source is investing in interoperability and a vital aspect of a long term strategy towards comprehensive health services and clinical research.

Open source platform for collaborative construction of wearable sensor datasets for human motion analysis and an application for gait analysis.

PubMed

Llamas, César; González, Manuel A; Hernández, Carmen; Vegas, Jesús

2016-10-01

Nearly every practical improvement in modeling human motion is well founded in a properly designed collection of data or datasets. These datasets must be made publicly available for the community could validate and accept them. It is reasonable to concede that a collective, guided enterprise could serve to devise solid and substantial datasets, as a result of a collaborative effort, in the same sense as the open software community does. In this way datasets could be complemented, extended and expanded in size with, for example, more individuals, samples and human actions. For this to be possible some commitments must be made by the collaborators, being one of them sharing the same data acquisition platform. In this paper, we offer an affordable open source hardware and software platform based on inertial wearable sensors in a way that several groups could cooperate in the construction of datasets through common software suitable for collaboration. Some experimental results about the throughput of the overall system are reported showing the feasibility of acquiring data from up to 6 sensors with a sampling frequency no less than 118Hz. Also, a proof-of-concept dataset is provided comprising sampled data from 12 subjects suitable for gait analysis. Copyright © 2016 Elsevier Inc. All rights reserved.

Freeing Worldview's development process: Open source everything!

NASA Astrophysics Data System (ADS)

Gunnoe, T.

2016-12-01

Freeing your code and your project are important steps for creating an inviting environment for collaboration, with the added side effect of keeping a good relationship with your users. NASA Worldview's codebase was released with the open source NOSA (NASA Open Source Agreement) license in 2014, but this is only the first step. We also have to free our ideas, empower our users by involving them in the development process, and open channels that lead to the creation of a community project. There are many highly successful examples of Free and Open Source Software (FOSS) projects of which we can take note: the Linux kernel, Debian, GNOME, etc. These projects owe much of their success to having a passionate mix of developers/users with a great community and a common goal in mind. This presentation will describe the scope of this openness and how Worldview plans to move forward with a more community-inclusive approach.

How Does a Collaborative Community Affect Diverse Students' Engagement with an Open Source Software Project: A Pedagogical Paradigm

ERIC Educational Resources Information Center

Morgan, Becka S.

2012-01-01

Open Source Software (OSS) communities are homogenous and their lack of diversity is of concern to many within this field. This problem is becoming more pronounced as it is the practice of many technology companies to use OSS participation as a factor in the hiring process, disadvantaging those who are not a part of this community. We should…

Alone Together: A Socio-Technical Theory of Motivation, Coordination and Collaboration Technologies in Organizing for Free and Open Source Software Development

ERIC Educational Resources Information Center

Howison, James

2009-01-01

This dissertation presents evidence that the production of Free and Open Source Software (FLOSS) is far more alone than together; it is far more often individual work done "in company" than it is teamwork. When tasks appear too large for an individual they are more likely to be deferred until they are easier rather than be undertaken through…

Unclassified Information Sharing and Coordination in Security, Stabilization, Transition and Reconstruction Efforts

DTIC Science & Technology

2008-03-01

is implemented using the Drupal (2007) content management system (CMS) and many of the baseline information sharing and collaboration tools have...been contributed through the Dru- pal open source community. Drupal is a very modular open source software written in PHP hypertext processor...needed to suit the particular problem domain. While other frameworks have the potential to provide similar advantages (“Ruby,” 2007), Drupal was

OpenQuake, a platform for collaborative seismic hazard and risk assessment

NASA Astrophysics Data System (ADS)

Henshaw, Paul; Burton, Christopher; Butler, Lars; Crowley, Helen; Danciu, Laurentiu; Nastasi, Matteo; Monelli, Damiano; Pagani, Marco; Panzeri, Luigi; Simionato, Michele; Silva, Vitor; Vallarelli, Giuseppe; Weatherill, Graeme; Wyss, Ben

2013-04-01

Sharing of data and risk information, best practices, and approaches across the globe is key to assessing risk more effectively. Through global projects, open-source IT development and collaborations with more than 10 regions, leading experts are collaboratively developing unique global datasets, best practice, tools and models for global seismic hazard and risk assessment, within the context of the Global Earthquake Model (GEM). Guided by the needs and experiences of governments, companies and international organisations, all contributions are being integrated into OpenQuake: a web-based platform that - together with other resources - will become accessible in 2014. With OpenQuake, stakeholders worldwide will be able to calculate, visualize and investigate earthquake hazard and risk, capture new data and share findings for joint learning. The platform is envisaged as a collaborative hub for earthquake risk assessment, used at global and local scales, around which an active network of users has formed. OpenQuake will comprise both online and offline tools, many of which can also be used independently. One of the first steps in OpenQuake development was the creation of open-source software for advanced seismic hazard and risk calculations at any scale, the OpenQuake Engine. Although in continuous development, a command-line version of the software is already being test-driven and used by hundreds worldwide; from non-profits in Central Asia, seismologists in sub-Saharan Africa and companies in South Asia to the European seismic hazard harmonization programme (SHARE). In addition, several technical trainings were organized with scientists from different regions of the world (sub-Saharan Africa, Central Asia, Asia-Pacific) to introduce the engine and other OpenQuake tools to the community, something that will continue to happen over the coming years. Other tools that are being developed of direct interest to the hazard community are: • OpenQuake Modeller; fundamental instruments for the creation of seismogenic input models for seismic hazard assessment, a critical input to the OpenQuake Engine. OpenQuake Modeller will consist of a suite of tools (Hazard Modellers Toolkit) for characterizing the seismogenic sources of earthquakes and their models of earthquakes recurrence. An earthquake catalogue homogenization tool, for integration, statistical comparison and user-defined harmonization of multiple catalogues of earthquakes is also included in the OpenQuake modeling tools. • A data capture tool for active faults; a tool that allows geologists to draw (new) fault discoveries on a map in an intuitive GIS-environment and add details on the fault through the tool. This data, once quality checked, can then be integrated with the global active faults database, which will increase in value with every new fault insertion. Building on many ongoing efforts and the knowledge of scientists worldwide, GEM will for the first time integrate state-of-the-art data, models, results and open-source tools into a single platform. The platform will continue to increase in value, in particular for use in local contexts, through contributions from and collaborations with scientists and organisations worldwide. This presentation will showcase the OpenQuake Platform, focusing on the IT solutions that have been adopted as well as the added value that the platform will bring to scientists worldwide.

Managing multicentre clinical trials with open source.

PubMed

Raptis, Dimitri Aristotle; Mettler, Tobias; Fischer, Michael Alexander; Patak, Michael; Lesurtel, Mickael; Eshmuminov, Dilmurodjon; de Rougemont, Olivier; Graf, Rolf; Clavien, Pierre-Alain; Breitenstein, Stefan

2014-03-01

Multicentre clinical trials are challenged by high administrative burden, data management pitfalls and costs. This leads to a reduced enthusiasm and commitment of the physicians involved and thus to a reluctance in conducting multicentre clinical trials. The purpose of this study was to develop a web-based open source platform to support a multi-centre clinical trial. We developed on Drupal, an open source software distributed under the terms of the General Public License, a web-based, multi-centre clinical trial management system with the design science research approach. This system was evaluated by user-testing and well supported several completed and on-going clinical trials and is available for free download. Open source clinical trial management systems are capable in supporting multi-centre clinical trials by enhancing efficiency, quality of data management and collaboration.

How open science helps researchers succeed.

PubMed

McKiernan, Erin C; Bourne, Philip E; Brown, C Titus; Buck, Stuart; Kenall, Amye; Lin, Jennifer; McDougall, Damon; Nosek, Brian A; Ram, Karthik; Soderberg, Courtney K; Spies, Jeffrey R; Thaney, Kaitlin; Updegrove, Andrew; Woo, Kara H; Yarkoni, Tal

2016-07-07

Open access, open data, open source and other open scholarship practices are growing in popularity and necessity. However, widespread adoption of these practices has not yet been achieved. One reason is that researchers are uncertain about how sharing their work will affect their careers. We review literature demonstrating that open research is associated with increases in citations, media attention, potential collaborators, job opportunities and funding opportunities. These findings are evidence that open research practices bring significant benefits to researchers relative to more traditional closed practices.

Open Genetic Code: on open source in the life sciences.

PubMed

Deibel, Eric

2014-01-01

The introduction of open source in the life sciences is increasingly being suggested as an alternative to patenting. This is an alternative, however, that takes its shape at the intersection of the life sciences and informatics. Numerous examples can be identified wherein open source in the life sciences refers to access, sharing and collaboration as informatic practices. This includes open source as an experimental model and as a more sophisticated approach of genetic engineering. The first section discusses the greater flexibly in regard of patenting and the relationship to the introduction of open source in the life sciences. The main argument is that the ownership of knowledge in the life sciences should be reconsidered in the context of the centrality of DNA in informatic formats. This is illustrated by discussing a range of examples of open source models. The second part focuses on open source in synthetic biology as exemplary for the re-materialization of information into food, energy, medicine and so forth. The paper ends by raising the question whether another kind of alternative might be possible: one that looks at open source as a model for an alternative to the commodification of life that is understood as an attempt to comprehensively remove the restrictions from the usage of DNA in any of its formats.

Open Source Clinical NLP - More than Any Single System.

PubMed

Masanz, James; Pakhomov, Serguei V; Xu, Hua; Wu, Stephen T; Chute, Christopher G; Liu, Hongfang

2014-01-01

The number of Natural Language Processing (NLP) tools and systems for processing clinical free-text has grown as interest and processing capability have surged. Unfortunately any two systems typically cannot simply interoperate, even when both are built upon a framework designed to facilitate the creation of pluggable components. We present two ongoing activities promoting open source clinical NLP. The Open Health Natural Language Processing (OHNLP) Consortium was originally founded to foster a collaborative community around clinical NLP, releasing UIMA-based open source software. OHNLP's mission currently includes maintaining a catalog of clinical NLP software and providing interfaces to simplify the interaction of NLP systems. Meanwhile, Apache cTAKES aims to integrate best-of-breed annotators, providing a world-class NLP system for accessing clinical information within free-text. These two activities are complementary. OHNLP promotes open source clinical NLP activities in the research community and Apache cTAKES bridges research to the health information technology (HIT) practice.

Open source tools for large-scale neuroscience.

PubMed

Freeman, Jeremy

2015-06-01

New technologies for monitoring and manipulating the nervous system promise exciting biology but pose challenges for analysis and computation. Solutions can be found in the form of modern approaches to distributed computing, machine learning, and interactive visualization. But embracing these new technologies will require a cultural shift: away from independent efforts and proprietary methods and toward an open source and collaborative neuroscience. Copyright © 2015 The Author. Published by Elsevier Ltd.. All rights reserved.

78 FR 45565 - Notice Pursuant to the National Cooperative Research and Production Act of 1993 -- tranSMART...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-29

... activities are to enable effective sharing, integration, standardization, and analysis of heterogeneous data from collaborative translational research by mobilizing the tranSMART open- source and open-data...: (a) Establish and sustain tranSMART as the preferred data sharing and analytics platform for...

A Methodological Approach to Support Collaborative Media Creation in an E-Learning Higher Education Context

ERIC Educational Resources Information Center

Ornellas, Adriana; Muñoz Carril, Pablo César

2014-01-01

This article outlines a methodological approach to the creation, production and dissemination of online collaborative audio-visual projects, using new social learning technologies and open-source video tools, which can be applied to any e-learning environment in higher education. The methodology was developed and used to design a course in the…

I've Gathered a Basket of Communication and Collaboration Tools

ERIC Educational Resources Information Center

Chang, May

2004-01-01

In this article, the author, a Web development librarian at North Carolina State University (NCSU) Libraries, recounts how she initiated the implementation of a series of open source communication and collaboration applications for the Libraries' Web site and intranet, and how she gathered a number of tried and tested C&C tools that can…

The Open Source DataTurbine Initiative: Streaming Data Middleware for Environmental Observing Systems

NASA Technical Reports Server (NTRS)

Fountain T.; Tilak, S.; Shin, P.; Hubbard, P.; Freudinger, L.

2009-01-01

The Open Source DataTurbine Initiative is an international community of scientists and engineers sharing a common interest in real-time streaming data middleware and applications. The technology base of the OSDT Initiative is the DataTurbine open source middleware. Key applications of DataTurbine include coral reef monitoring, lake monitoring and limnology, biodiversity and animal tracking, structural health monitoring and earthquake engineering, airborne environmental monitoring, and environmental sustainability. DataTurbine software emerged as a commercial product in the 1990 s from collaborations between NASA and private industry. In October 2007, a grant from the USA National Science Foundation (NSF) Office of Cyberinfrastructure allowed us to transition DataTurbine from a proprietary software product into an open source software initiative. This paper describes the DataTurbine software and highlights key applications in environmental monitoring.

An open source, web based, simple solution for seismic data dissemination and collaborative research

NASA Astrophysics Data System (ADS)

Diviacco, Paolo

2005-06-01

Collaborative research and data dissemination in the field of geophysical exploration need network tools that can access large amounts of data from anywhere using any PC or workstation. Simple solutions based on a combination of Open Source software can be developed to address such requests, exploiting the possibilities offered by the web technologies, and at the same time avoiding the costs and inflexibility of commercial systems. A viable solution consists of MySQL for data storage and retrieval, CWP/SU and GMT for data visualisation and a scripting layer driven by PHP that allows users to access the system via an Apache web server. In the light of the experience building the on-line archive of seismic data of the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS), we describe the solutions and the methods adopted, with a view to stimulate both the attitude of network collaborative research of other institutions similar to ours, and the development of different applications.

DCO-VIVO: A Collaborative Data Platform for the Deep Carbon Science Communities

NASA Astrophysics Data System (ADS)

Wang, H.; Chen, Y.; West, P.; Erickson, J. S.; Ma, X.; Fox, P. A.

2014-12-01

Deep Carbon Observatory (DCO) is a decade-long scientific endeavor to understand carbon in the complex deep Earth system. Thousands of DCO scientists from institutions across the globe are organized into communities representing four domains of exploration: Extreme Physics and Chemistry, Reservoirs and Fluxes, Deep Energy, and Deep Life. Cross-community and cross-disciplinary collaboration is one of the most distinctive features in DCO's flexible research framework. VIVO is an open-source Semantic Web platform that facilitates cross-institutional researcher and research discovery. it includes a number of standard ontologies that interconnect people, organizations, publications, activities, locations, and other entities of research interest to enable browsing, searching, visualizing, and generating Linked Open (research) Data. The DCO-VIVO solution expedites research collaboration between DCO scientists and communities. Based on DCO's specific requirements, the DCO Data Science team developed a series of extensions to the VIVO platform including extending the VIVO information model, extended query over the semantic information within VIVO, integration with other open source collaborative environments and data management systems, using single sign-on, assigning of unique Handles to DCO objects, and publication and dataset ingesting extensions using existing publication systems. We present here the iterative development of these requirements that are now in daily use by the DCO community of scientists for research reporting, information sharing, and resource discovery in support of research activities and program management.

Inequalities in Open Source Software Development: Analysis of Contributor's Commits in Apache Software Foundation Projects.

PubMed

Chełkowski, Tadeusz; Gloor, Peter; Jemielniak, Dariusz

2016-01-01

While researchers are becoming increasingly interested in studying OSS phenomenon, there is still a small number of studies analyzing larger samples of projects investigating the structure of activities among OSS developers. The significant amount of information that has been gathered in the publicly available open-source software repositories and mailing-list archives offers an opportunity to analyze projects structures and participant involvement. In this article, using on commits data from 263 Apache projects repositories (nearly all), we show that although OSS development is often described as collaborative, but it in fact predominantly relies on radically solitary input and individual, non-collaborative contributions. We also show, in the first published study of this magnitude, that the engagement of contributors is based on a power-law distribution.

Inequalities in Open Source Software Development: Analysis of Contributor’s Commits in Apache Software Foundation Projects

PubMed Central

2016-01-01

While researchers are becoming increasingly interested in studying OSS phenomenon, there is still a small number of studies analyzing larger samples of projects investigating the structure of activities among OSS developers. The significant amount of information that has been gathered in the publicly available open-source software repositories and mailing-list archives offers an opportunity to analyze projects structures and participant involvement. In this article, using on commits data from 263 Apache projects repositories (nearly all), we show that although OSS development is often described as collaborative, but it in fact predominantly relies on radically solitary input and individual, non-collaborative contributions. We also show, in the first published study of this magnitude, that the engagement of contributors is based on a power-law distribution. PMID:27096157

A generic open-source software framework supporting scenario simulations in bioterrorist crises.

PubMed

Falenski, Alexander; Filter, Matthias; Thöns, Christian; Weiser, Armin A; Wigger, Jan-Frederik; Davis, Matthew; Douglas, Judith V; Edlund, Stefan; Hu, Kun; Kaufman, James H; Appel, Bernd; Käsbohrer, Annemarie

2013-09-01

Since the 2001 anthrax attack in the United States, awareness of threats originating from bioterrorism has grown. This led internationally to increased research efforts to improve knowledge of and approaches to protecting human and animal populations against the threat from such attacks. A collaborative effort in this context is the extension of the open-source Spatiotemporal Epidemiological Modeler (STEM) simulation and modeling software for agro- or bioterrorist crisis scenarios. STEM, originally designed to enable community-driven public health disease models and simulations, was extended with new features that enable integration of proprietary data as well as visualization of agent spread along supply and production chains. STEM now provides a fully developed open-source software infrastructure supporting critical modeling tasks such as ad hoc model generation, parameter estimation, simulation of scenario evolution, estimation of effects of mitigation or management measures, and documentation. This open-source software resource can be used free of charge. Additionally, STEM provides critical features like built-in worldwide data on administrative boundaries, transportation networks, or environmental conditions (eg, rainfall, temperature, elevation, vegetation). Users can easily combine their own confidential data with built-in public data to create customized models of desired resolution. STEM also supports collaborative and joint efforts in crisis situations by extended import and export functionalities. In this article we demonstrate specifically those new software features implemented to accomplish STEM application in agro- or bioterrorist crisis scenarios.

Open Source Next Generation Visualization Software for Interplanetary Missions

NASA Technical Reports Server (NTRS)

Trimble, Jay; Rinker, George

2016-01-01

Mission control is evolving quickly, driven by the requirements of new missions, and enabled by modern computing capabilities. Distributed operations, access to data anywhere, data visualization for spacecraft analysis that spans multiple data sources, flexible reconfiguration to support multiple missions, and operator use cases, are driving the need for new capabilities. NASA's Advanced Multi-Mission Operations System (AMMOS), Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) are collaborating to build a new generation of mission operations software for visualization, to enable mission control anywhere, on the desktop, tablet and phone. The software is built on an open source platform that is open for contributions (http://nasa.github.io/openmct).

Sketching Up New Geographies: Open Sourcing and Curriculum Development

ERIC Educational Resources Information Center

Boyd, William; Ellis, David

2013-01-01

The functionality of web 2.0 technologies has caused academics to rethink their development of teaching and learning methods and approaches. The editable, open access nature of web 2.0 encourages the innovative collaboration of ideas, the creation of equitable visual and tactile learning environments, and opportunity for academics to develop…

Scholarly Knowledge Development and Dissemination in an International Context: Approaches and Tools for Higher Education

ERIC Educational Resources Information Center

Willis, Jerry; Baron, Josh; Lee, Reba-Anna; Gozza-Cohen, Mary; Currie, Amity

2010-01-01

This paper looks at the process of collaboratively creating and disseminating information resources, such as journals, books, papers, and multimedia resources in higher education. This process has been facilitated and encouraged by two relatively new movements, open-source and, especially, open access. The most definitive expression of the…

A Technology Enhanced Learning Model for Quality Education

NASA Astrophysics Data System (ADS)

Sherly, Elizabeth; Uddin, Md. Meraj

Technology Enhanced Learning and Teaching (TELT) Model provides learning through collaborations and interactions with a framework for content development and collaborative knowledge sharing system as a supplementary for learning to improve the quality of education system. TELT deals with a unique pedagogy model for Technology Enhanced Learning System which includes course management system, digital library, multimedia enriched contents and video lectures, open content management system and collaboration and knowledge sharing systems. Open sources like Moodle and Wiki for content development, video on demand solution with a low cost mid range system, an exhaustive digital library are provided in a portal system. The paper depicts a case study of e-learning initiatives with TELT model at IIITM-K and how effectively implemented.

Acquiring Data by Mining the Past: Pairing Communities with Environmental Monitoring Methods through Open Online Collaborative Replication

NASA Astrophysics Data System (ADS)

Lippincott, M.; Lewis, E. S.; Gehrke, G. E.; Wise, A.; Pyle, S.; Sinatra, V.; Bland, G.; Bydlowski, D.; Henry, A.; Gilberts, P. A.

2016-12-01

Community groups are interested in low-cost sensors to monitor their environment. However, many new commercial sensors are unknown devices without peer-reviewed evaluations of data quality or pathways to regulatory acceptance, and the time to achieve these outcomes may be beyond a community's patience and attention. Rather than developing a device from scratch or validating a new commercial product, a workflow is presented whereby existing technologies, especially those that are out of patent, are replicated through open online collaboration between communities affected by environmental pollution, volunteers, academic institutions, and existing open hardware and open source software projects. Technology case studies will be presented, focusing primarily on a passive PM monitor based on the UNC Passive Monitor. Stages of the project will be detailed moving from identifying community needs, reviewing existing technology, partnership development, technology replication, IP review and licensing, data quality assurance (in process), and field evaluation with community partners (in process), with special attention to partnership development and technology review. We have leveraged open hardware and open source software to lower the cost and access barriers of existing technologies for PM10-2.5 and other atmospheric measures that have already been validated through peer review. Existing validation of and regulatory familiarity with a technology enables a rapid pathway towards collecting data, shortening the time it takes for communities to leverage data in environmental management decisions. Online collaboration requires rigorous documentation that aids in spreading research methods and promoting deep engagement by interested community researchers outside academia. At the same time, careful choice of technology and the use of small-scale fabrication through laser cutting, 3D printing, and open, shared repositories of plans and software enables educational engagement that broadens a project's reach.

Using Collaborative Filtering to Support College Students' Use of Online Forum for English Learning

ERIC Educational Resources Information Center

Wang, Pei-Yu; Yang, Hui-Chun

2012-01-01

This study examined the impact of collaborative filtering (the so-called recommender) on college students' use of an online forum for English learning. The forum was created with an open-source software, Drupal, and its extended recommender module. This study was guided by three main questions: 1) Is there any difference in online behaviors…

Fiji: an open-source platform for biological-image analysis.

PubMed

Schindelin, Johannes; Arganda-Carreras, Ignacio; Frise, Erwin; Kaynig, Verena; Longair, Mark; Pietzsch, Tobias; Preibisch, Stephan; Rueden, Curtis; Saalfeld, Stephan; Schmid, Benjamin; Tinevez, Jean-Yves; White, Daniel James; Hartenstein, Volker; Eliceiri, Kevin; Tomancak, Pavel; Cardona, Albert

2012-06-28

Fiji is a distribution of the popular open-source software ImageJ focused on biological-image analysis. Fiji uses modern software engineering practices to combine powerful software libraries with a broad range of scripting languages to enable rapid prototyping of image-processing algorithms. Fiji facilitates the transformation of new algorithms into ImageJ plugins that can be shared with end users through an integrated update system. We propose Fiji as a platform for productive collaboration between computer science and biology research communities.

Is Open Science the Future of Drug Development?

PubMed

Shaw, Daniel L

2017-03-01

Traditional drug development models are widely perceived as opaque and inefficient, with the cost of research and development continuing to rise even as production of new drugs stays constant. Searching for strategies to improve the drug discovery process, the biomedical research field has begun to embrace open strategies. The resulting changes are starting to reshape the industry. Open science-an umbrella term for diverse strategies that seek external input and public engagement-has become an essential tool with researchers, who are increasingly turning to collaboration, crowdsourcing, data sharing, and open sourcing to tackle some of the most pressing problems in medicine. Notable examples of such open drug development include initiatives formed around malaria and tropical disease. Open practices have found their way into the drug discovery process, from target identification and compound screening to clinical trials. This perspective argues that while open science poses some risks-which include the management of collaboration and the protection of proprietary data-these strategies are, in many cases, the more efficient and ethical way to conduct biomedical research.

Getting Open Source Right for Big Data Analytics: Software Sharing, Governance, Collaboration and Most of All, Fun!

NASA Astrophysics Data System (ADS)

Mattmann, C. A.

2013-12-01

A wave of open source big data analytic infrastructure is currently shaping government, private sector, and academia. Projects are consuming, adapting, and contributing back to various ecosystems of software e.g., the Apache Hadoop project and its ecosystem of related efforts including Hive, HBase, Pig, Oozie, Ambari, Knox, Tez and Yarn, to name a few; the Berkeley AMPLab stack which includes Spark, Shark, Mesos, Tachyon, BlinkDB, MLBase, and other emerging efforts; MapR and its related stack of technologies, offerings from commercial companies building products around these tools e.g., Hortonworks Data Platform (HDP), Cloudera's CDH project, etc. Though the technologies all offer different capabilities including low latency support/in-memory, versus record oriented file I/O, high availability, support for the Map Reduce programming paradigm or other dataflow/workflow constructs, there is a common thread that binds these products - they are all released under an open source license e.g., Apache2, MIT, BSD, GPL/LGPL, etc.; all thrive in various ecosystems, such as Apache, or Berkeley AMPLab; all are developed collaboratively, and all technologies provide plug in architecture models and methodologies for allowing others to contribute, and participate via various community models. This talk will cover the open source aspects and governance aspects of the aforementioned Big Data ecosystems and point out the differences, subtleties, and implications of those differences. The discussion will be by example, using several national deployments and Big Data initiatives stemming from the Administration including DARPA's XDATA program; NASA's CMAC program; NSF's EarthCube and geosciences BigData projects. Lessons learned from these efforts in terms of the open source aspects of these technologies will help guide the AGU community in their use, deployment and understanding.

The Open AUC Project.

PubMed

Cölfen, Helmut; Laue, Thomas M; Wohlleben, Wendel; Schilling, Kristian; Karabudak, Engin; Langhorst, Bradley W; Brookes, Emre; Dubbs, Bruce; Zollars, Dan; Rocco, Mattia; Demeler, Borries

2010-02-01

Progress in analytical ultracentrifugation (AUC) has been hindered by obstructions to hardware innovation and by software incompatibility. In this paper, we announce and outline the Open AUC Project. The goals of the Open AUC Project are to stimulate AUC innovation by improving instrumentation, detectors, acquisition and analysis software, and collaborative tools. These improvements are needed for the next generation of AUC-based research. The Open AUC Project combines on-going work from several different groups. A new base instrument is described, one that is designed from the ground up to be an analytical ultracentrifuge. This machine offers an open architecture, hardware standards, and application programming interfaces for detector developers. All software will use the GNU Public License to assure that intellectual property is available in open source format. The Open AUC strategy facilitates collaborations, encourages sharing, and eliminates the chronic impediments that have plagued AUC innovation for the last 20 years. This ultracentrifuge will be equipped with multiple and interchangeable optical tracks so that state-of-the-art electronics and improved detectors will be available for a variety of optical systems. The instrument will be complemented by a new rotor, enhanced data acquisition and analysis software, as well as collaboration software. Described here are the instrument, the modular software components, and a standardized database that will encourage and ease integration of data analysis and interpretation software.

Open Source Clinical NLP – More than Any Single System

PubMed Central

Masanz, James; Pakhomov, Serguei V.; Xu, Hua; Wu, Stephen T.; Chute, Christopher G.; Liu, Hongfang

2014-01-01

The number of Natural Language Processing (NLP) tools and systems for processing clinical free-text has grown as interest and processing capability have surged. Unfortunately any two systems typically cannot simply interoperate, even when both are built upon a framework designed to facilitate the creation of pluggable components. We present two ongoing activities promoting open source clinical NLP. The Open Health Natural Language Processing (OHNLP) Consortium was originally founded to foster a collaborative community around clinical NLP, releasing UIMA-based open source software. OHNLP’s mission currently includes maintaining a catalog of clinical NLP software and providing interfaces to simplify the interaction of NLP systems. Meanwhile, Apache cTAKES aims to integrate best-of-breed annotators, providing a world-class NLP system for accessing clinical information within free-text. These two activities are complementary. OHNLP promotes open source clinical NLP activities in the research community and Apache cTAKES bridges research to the health information technology (HIT) practice. PMID:25954581

Early Alert of Academically At-Risk Students: An Open Source Analytics Initiative

ERIC Educational Resources Information Center

Jayaprakash, Sandeep M.; Moody, Erik W.; Lauría, Eitel J. M.; Regan, James R.; Baron, Joshua D.

2014-01-01

The Open Academic Analytics Initiative (OAAI) is a collaborative, multi-year grant program aimed at researching issues related to the scaling up of learning analytics technologies and solutions across all of higher education. The paper describes the goals and objectives of the OAAI, depicts the process and challenges of collecting, organizing and…

GOC-TX: A Reliable Ticket Synchronization Application for the Open Science Grid

NASA Astrophysics Data System (ADS)

Hayashi, Soichi; Gopu, Arvind; Quick, Robert

2011-12-01

One of the major operational issues faced by large multi-institutional collaborations is permitting its users and support staff to use their native ticket tracking environment while also exchanging these tickets with collaborators. After several failed attempts at email-parser based ticket exchanges, the OSG Operations Group has designed a comprehensive ticket synchronizing application. The GOC-TX application uses web-service interfaces offered by various commercial, open source and other homegrown ticketing systems, to synchronize tickets between two or more of these systems. GOC-TX operates independently from any ticketing system. It can be triggered by one ticketing system via email, active messaging, or a web-services call to check for current sync-status, pull applicable recent updates since prior synchronizations to the source ticket, and apply the updates to a destination ticket. The currently deployed production version of GOC-TX is able to synchronize tickets between the Numara Footprints ticketing system used by the OSG and the following systems: European Grid Initiative's system Global Grid User Support (GGUS) and the Request Tracker (RT) system used by Brookhaven. Additional interfaces to the BMC Remedy system used by Fermilab, and to other instances of RT used by other OSG partners, are expected to be completed in summer 2010. A fully configurable open source version is expected to be made available by early autumn 2010. This paper will cover the structure of the GOC-TX application, its evolution, and the problems encountered by OSG Operations group with ticket exchange within the OSG Collaboration.

Open source pipeline for ESPaDOnS reduction and analysis

NASA Astrophysics Data System (ADS)

Martioli, Eder; Teeple, Doug; Manset, Nadine; Devost, Daniel; Withington, Kanoa; Venne, Andre; Tannock, Megan

2012-09-01

OPERA is a Canada-France-Hawaii Telescope (CFHT) open source collaborative software project currently under development for an ESPaDOnS echelle spectro-polarimetric image reduction pipeline. OPERA is designed to be fully automated, performing calibrations and reduction, producing one-dimensional intensity and polarimetric spectra. The calibrations are performed on two-dimensional images. Spectra are extracted using an optimal extraction algorithm. While primarily designed for CFHT ESPaDOnS data, the pipeline is being written to be extensible to other echelle spectrographs. A primary design goal is to make use of fast, modern object-oriented technologies. Processing is controlled by a harness, which manages a set of processing modules, that make use of a collection of native OPERA software libraries and standard external software libraries. The harness and modules are completely parametrized by site configuration and instrument parameters. The software is open- ended, permitting users of OPERA to extend the pipeline capabilities. All these features have been designed to provide a portable infrastructure that facilitates collaborative development, code re-usability and extensibility. OPERA is free software with support for both GNU/Linux and MacOSX platforms. The pipeline is hosted on SourceForge under the name "opera-pipeline".

Comparison/Validation Study of Lattice Boltzmann and Navier Stokes for Various Benchmark Applications: Report 1 in Discrete Nano-Scale Mechanics and Simulations Series

DTIC Science & Technology

2014-09-15

solver, OpenFOAM version 2.1.‡ In particular, the incompressible laminar flow equations (Eq. 6-8) were solved in conjunction with the pressure im- plicit...central differencing and upwinding schemes, respectively. Since the OpenFOAM code is inherently transient, steady-state conditions were ob- tained...collaborative effort between Kitware and Los Alamos National Laboratory. ‡ OpenFOAM is a free, open-source computational fluid dynamics software developed

How open science helps researchers succeed

PubMed Central

McKiernan, Erin C; Bourne, Philip E; Brown, C Titus; Buck, Stuart; Kenall, Amye; Lin, Jennifer; McDougall, Damon; Nosek, Brian A; Ram, Karthik; Soderberg, Courtney K; Spies, Jeffrey R; Thaney, Kaitlin; Updegrove, Andrew; Woo, Kara H; Yarkoni, Tal

2016-01-01

Open access, open data, open source and other open scholarship practices are growing in popularity and necessity. However, widespread adoption of these practices has not yet been achieved. One reason is that researchers are uncertain about how sharing their work will affect their careers. We review literature demonstrating that open research is associated with increases in citations, media attention, potential collaborators, job opportunities and funding opportunities. These findings are evidence that open research practices bring significant benefits to researchers relative to more traditional closed practices. DOI: http://dx.doi.org/10.7554/eLife.16800.001 PMID:27387362

The Role of Free/Libre and Open Source Software in Learning Health Systems.

PubMed

Paton, C; Karopka, T

2017-08-01

Objective: To give an overview of the role of Free/Libre and Open Source Software (FLOSS) in the context of secondary use of patient data to enable Learning Health Systems (LHSs). Methods: We conducted an environmental scan of the academic and grey literature utilising the MedFLOSS database of open source systems in healthcare to inform a discussion of the role of open source in developing LHSs that reuse patient data for research and quality improvement. Results: A wide range of FLOSS is identified that contributes to the information technology (IT) infrastructure of LHSs including operating systems, databases, frameworks, interoperability software, and mobile and web apps. The recent literature around the development and use of key clinical data management tools is also reviewed. Conclusions: FLOSS already plays a critical role in modern health IT infrastructure for the collection, storage, and analysis of patient data. The nature of FLOSS systems to be collaborative, modular, and modifiable may make open source approaches appropriate for building the digital infrastructure for a LHS. Georg Thieme Verlag KG Stuttgart.

Thin client (web browser)-based collaboration for medical imaging and web-enabled data.

PubMed

Le, Tuong Huu; Malhi, Nadeem

2002-01-01

Utilizing thin client software and open source server technology, a collaborative architecture was implemented allowing for sharing of Digital Imaging and Communications in Medicine (DICOM) and non-DICOM images with real-time markup. Using the Web browser as a thin client integrated with standards-based components, such as DHTML (dynamic hypertext markup language), JavaScript, and Java, collaboration was achieved through a Web server/proxy server combination utilizing Java Servlets and Java Server Pages. A typical collaborative session involved the driver, who directed the navigation of the other collaborators, the passengers, and provided collaborative markups of medical and nonmedical images. The majority of processing was performed on the server side, allowing for the client to remain thin and more accessible.

A New Architecture for Visualization: Open Mission Control Technologies

NASA Technical Reports Server (NTRS)

Trimble, Jay

2017-01-01

Open Mission Control Technologies (MCT) is a new architecture for visualisation of mission data. Driven by requirements for new mission capabilities, including distributed mission operations, access to data anywhere, customization by users, synthesis of multiple data sources, and flexibility for multi-mission adaptation, Open MCT provides users with an integrated customizable environment. Developed at NASAs Ames Research Center (ARC), in collaboration with NASAs Advanced Multimission Operations System (AMMOS) and NASAs Jet Propulsion Laboratory (JPL), Open MCT is getting its first mission use on the Jason 3 Mission, and is also available in the testbed for the Mars 2020 Rover and for development use for NASAs Resource Prospector Lunar Rover. The open source nature of the project provides for use outside of space missions, including open source contributions from a community of users. The defining features of Open MCT for mission users are data integration, end user composition and multiple views. Data integration provides access to mission data across domains in one place, making data such as activities, timelines, telemetry, imagery, event timers and procedures available in one place, without application switching. End user composition provides users with layouts, which act as a canvas to assemble visualisations. Multiple views provide the capability to view the same data in different ways, with live switching of data views in place. Open MCT is browser based, and works on the desktop as well as tablets and phones, providing access to data anywhere. An early use case for mobile data access took place on the Resource Prospector (RP) Mission Distributed Operations Test, in which rover engineers in the field were able to view telemetry on their phones. We envision this capability providing decision support to on console operators from off duty personnel. The plug-in architecture also allows for adaptation for different mission capabilities. Different data types and capabilities may be added or removed using plugins. An API provides a means to write new capabilities and to create data adaptors. Data plugins exist for mission data sources for NASA missions. Adaptors have been written by international and commercial users. Open MCT is open source. Open source enables collaborative development across organizations and also makes the product available outside of the space community, providing a potential source of usage and ideas to drive product design and development. The combination of open source with an Apache 2 license, and distribution on GitHub, has enabled an active community of users and contributors. The spectrum of users for Open MCT is, to our knowledge, unprecedented for mission software. In addition to our NASA users, we have, through open source, had users and inquires on projects ranging from Internet of Things, to radio hobbyists, to farming projects. We have an active community of contributors, enabling a flow of ideas inside and outside of the space community.

Hanging with the Right Crowd: Crowdsourcing as a New Business Practice for Innovation, Productivity, Knowledge Capture, and Marketing

ERIC Educational Resources Information Center

Erickson, Lisa B.

2013-01-01

In today's connected world, the reach of the Internet and collaborative social media tools have opened up new opportunities for individuals, regardless of their location, to share their knowledge, expertise, and creativity with others. These tools have also opened up opportunities for organizations to connect with new sources of innovation to…

An Invitation to Collaborate: The SPIRIT Open Source Health Care Portal

PubMed Central

Bray, Brian; Molin, Joseph Dal

2001-01-01

The SPIRIT portal is a web site resulting from a joint project of the European Commission 5th Framework Research Programme for Information Society Technologies, Minoru Development (France), Conecta srl (Italy), and Sistema Information Systems (Italy). The portal indexes and disseminates free software, serves as a meeting point for health care informatics researchers, and provides collaboration services to health care innovators. This poster session describes the services of the portal and invites researchers to join a worldwide collaborative community developing evidence based health care solutions.

THE AUTOMATED GEOSPATIAL WATERSHED ASSESSMENT TOOL

EPA Science Inventory

A toolkit for distributed hydrologic modeling at multiple scales using a geographic information system is presented. This open-source, freely available software was developed through a collaborative endeavor involving two Universities and two government agencies. Called the Auto...

scikit-image: image processing in Python.

PubMed

van der Walt, Stéfan; Schönberger, Johannes L; Nunez-Iglesias, Juan; Boulogne, François; Warner, Joshua D; Yager, Neil; Gouillart, Emmanuelle; Yu, Tony

2014-01-01

scikit-image is an image processing library that implements algorithms and utilities for use in research, education and industry applications. It is released under the liberal Modified BSD open source license, provides a well-documented API in the Python programming language, and is developed by an active, international team of collaborators. In this paper we highlight the advantages of open source to achieve the goals of the scikit-image library, and we showcase several real-world image processing applications that use scikit-image. More information can be found on the project homepage, http://scikit-image.org.

PlasmaPy: beginning a community developed Python package for plasma physics

NASA Astrophysics Data System (ADS)

Murphy, Nicholas A.; Huang, Yi-Min; PlasmaPy Collaboration

2016-10-01

In recent years, researchers in several disciplines have collaborated on community-developed open source Python packages such as Astropy, SunPy, and SpacePy. These packages provide core functionality, common frameworks for data analysis and visualization, and educational tools. We propose that our community begins the development of PlasmaPy: a new open source core Python package for plasma physics. PlasmaPy could include commonly used functions in plasma physics, easy-to-use plasma simulation codes, Grad-Shafranov solvers, eigenmode solvers, and tools to analyze both simulations and experiments. The development will include modern programming practices such as version control, embedding documentation in the code, unit tests, and avoiding premature optimization. We will describe early code development on PlasmaPy, and discuss plans moving forward. The success of PlasmaPy depends on active community involvement and a welcoming and inclusive environment, so anyone interested in joining this collaboration should contact the authors.

Exploring the Role of Value Networks for Software Innovation

NASA Astrophysics Data System (ADS)

Morgan, Lorraine; Conboy, Kieran

This paper describes a research-in-progress that aims to explore the applicability and implications of open innovation practices in two firms - one that employs agile development methods and another that utilizes open source software. The open innovation paradigm has a lot in common with open source and agile development methodologies. A particular strength of agile approaches is that they move away from 'introverted' development, involving only the development personnel, and intimately involves the customer in all areas of software creation, supposedly leading to the development of a more innovative and hence more valuable information system. Open source software (OSS) development also shares two key elements of the open innovation model, namely the collaborative development of the technology and shared rights to the use of the technology. However, one shortfall with agile development in particular is the narrow focus on a single customer representative. In response to this, we argue that current thinking regarding innovation needs to be extended to include multiple stakeholders both across and outside the organization. Additionally, for firms utilizing open source, it has been found that their position in a network of potential complementors determines the amount of superior value they create for their customers. Thus, this paper aims to get a better understanding of the applicability and implications of open innovation practices in firms that employ open source and agile development methodologies. In particular, a conceptual framework is derived for further testing.

Embracing Open Source for NASA's Earth Science Data Systems

NASA Technical Reports Server (NTRS)

Baynes, Katie; Pilone, Dan; Boller, Ryan; Meyer, David; Murphy, Kevin

2017-01-01

The overarching purpose of NASAs Earth Science program is to develop a scientific understanding of Earth as a system. Scientific knowledge is most robust and actionable when resulting from transparent, traceable, and reproducible methods. Reproducibility includes open access to the data as well as the software used to arrive at results. Additionally, software that is custom-developed for NASA should be open to the greatest degree possible, to enable re-use across Federal agencies, reduce overall costs to the government, remove barriers to innovation, and promote consistency through the use of uniform standards. Finally, Open Source Software (OSS) practices facilitate collaboration between agencies and the private sector. To best meet these ends, NASAs Earth Science Division promotes the full and open sharing of not only all data, metadata, products, information, documentation, models, images, and research results but also the source code used to generate, manipulate and analyze them. This talk focuses on the challenges to open sourcing NASA developed software within ESD and the growing pains associated with establishing policies running the gamut of tracking issues, properly documenting build processes, engaging the open source community, maintaining internal compliance, and accepting contributions from external sources. This talk also covers the adoption of existing open source technologies and standards to enhance our custom solutions and our contributions back to the community. Finally, we will be introducing the most recent OSS contributions from NASA Earth Science program and promoting these projects for wider community review and adoption.

A prospective international cooperative information technology platform built using open-source tools for improving the access to and safety of bone marrow transplantation in low- and middle-income countries.

PubMed

Agarwal, Rajat Kumar; Sedai, Amit; Dhimal, Sunil; Ankita, Kumari; Clemente, Luigi; Siddique, Sulman; Yaqub, Naila; Khalid, Sadaf; Itrat, Fatima; Khan, Anwar; Gilani, Sarah Khan; Marwah, Priya; Soni, Rajpreet; Missiry, Mohamed El; Hussain, Mohamed Hamed; Uderzo, Cornelio; Faulkner, Lawrence

2014-01-01

Jagriti Innovations developed a collaboration tool in partnership with the Cure2Children Foundation that has been used by health professionals in Italy, Pakistan, and India for the collaborative management of patients undergoing bone marrow transplantation (BMT) for thalassemia major since August 2008. This online open-access database covers data recording, analyzing, and reporting besides enabling knowledge exchange, telemedicine, capacity building, and quality assurance. As of February 2014, over 2400 patients have been registered and 112 BMTs have been performed with outcomes comparable to international standards, but at a fraction of the cost. This approach avoids medical emigration and contributes to local healthcare strengthening and competitiveness. This paper presents the experience and clinical outcomes associated with the use of this platform built using open-source tools and focusing on a locally pertinent tertiary care procedure-BMT. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Is Open Science the Future of Drug Development?

PubMed Central

Shaw, Daniel L.

2017-01-01

Traditional drug development models are widely perceived as opaque and inefficient, with the cost of research and development continuing to rise even as production of new drugs stays constant. Searching for strategies to improve the drug discovery process, the biomedical research field has begun to embrace open strategies. The resulting changes are starting to reshape the industry. Open science—an umbrella term for diverse strategies that seek external input and public engagement—has become an essential tool with researchers, who are increasingly turning to collaboration, crowdsourcing, data sharing, and open sourcing to tackle some of the most pressing problems in medicine. Notable examples of such open drug development include initiatives formed around malaria and tropical disease. Open practices have found their way into the drug discovery process, from target identification and compound screening to clinical trials. This perspective argues that while open science poses some risks—which include the management of collaboration and the protection of proprietary data—these strategies are, in many cases, the more efficient and ethical way to conduct biomedical research. PMID:28356902

Neural ensemble communities: open-source approaches to hardware for large-scale electrophysiology.

PubMed

Siegle, Joshua H; Hale, Gregory J; Newman, Jonathan P; Voigts, Jakob

2015-06-01

One often-overlooked factor when selecting a platform for large-scale electrophysiology is whether or not a particular data acquisition system is 'open' or 'closed': that is, whether or not the system's schematics and source code are available to end users. Open systems have a reputation for being difficult to acquire, poorly documented, and hard to maintain. With the arrival of more powerful and compact integrated circuits, rapid prototyping services, and web-based tools for collaborative development, these stereotypes must be reconsidered. We discuss some of the reasons why multichannel extracellular electrophysiology could benefit from open-source approaches and describe examples of successful community-driven tool development within this field. In order to promote the adoption of open-source hardware and to reduce the need for redundant development efforts, we advocate a move toward standardized interfaces that connect each element of the data processing pipeline. This will give researchers the flexibility to modify their tools when necessary, while allowing them to continue to benefit from the high-quality products and expertise provided by commercial vendors. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Kernel for Open Source Drug Discovery in Tropical Diseases

PubMed Central

Ortí, Leticia; Carbajo, Rodrigo J.; Pieper, Ursula; Eswar, Narayanan; Maurer, Stephen M.; Rai, Arti K.; Taylor, Ginger; Todd, Matthew H.; Pineda-Lucena, Antonio; Sali, Andrej; Marti-Renom, Marc A.

2009-01-01

Background Conventional patent-based drug development incentives work badly for the developing world, where commercial markets are usually small to non-existent. For this reason, the past decade has seen extensive experimentation with alternative R&D institutions ranging from private–public partnerships to development prizes. Despite extensive discussion, however, one of the most promising avenues—open source drug discovery—has remained elusive. We argue that the stumbling block has been the absence of a critical mass of preexisting work that volunteers can improve through a series of granular contributions. Historically, open source software collaborations have almost never succeeded without such “kernels”. Methodology/Principal Findings Here, we use a computational pipeline for: (i) comparative structure modeling of target proteins, (ii) predicting the localization of ligand binding sites on their surfaces, and (iii) assessing the similarity of the predicted ligands to known drugs. Our kernel currently contains 143 and 297 protein targets from ten pathogen genomes that are predicted to bind a known drug or a molecule similar to a known drug, respectively. The kernel provides a source of potential drug targets and drug candidates around which an online open source community can nucleate. Using NMR spectroscopy, we have experimentally tested our predictions for two of these targets, confirming one and invalidating the other. Conclusions/Significance The TDI kernel, which is being offered under the Creative Commons attribution share-alike license for free and unrestricted use, can be accessed on the World Wide Web at http://www.tropicaldisease.org. We hope that the kernel will facilitate collaborative efforts towards the discovery of new drugs against parasites that cause tropical diseases. PMID:19381286

Cloud computing geospatial application for water resources based on free and open source software and open standards - a prototype

NASA Astrophysics Data System (ADS)

Delipetrev, Blagoj

2016-04-01

Presently, most of the existing software is desktop-based, designed to work on a single computer, which represents a major limitation in many ways, starting from limited computer processing, storage power, accessibility, availability, etc. The only feasible solution lies in the web and cloud. This abstract presents research and development of a cloud computing geospatial application for water resources based on free and open source software and open standards using hybrid deployment model of public - private cloud, running on two separate virtual machines (VMs). The first one (VM1) is running on Amazon web services (AWS) and the second one (VM2) is running on a Xen cloud platform. The presented cloud application is developed using free and open source software, open standards and prototype code. The cloud application presents a framework how to develop specialized cloud geospatial application that needs only a web browser to be used. This cloud application is the ultimate collaboration geospatial platform because multiple users across the globe with internet connection and browser can jointly model geospatial objects, enter attribute data and information, execute algorithms, and visualize results. The presented cloud application is: available all the time, accessible from everywhere, it is scalable, works in a distributed computer environment, it creates a real-time multiuser collaboration platform, the programing languages code and components are interoperable, and it is flexible in including additional components. The cloud geospatial application is implemented as a specialized water resources application with three web services for 1) data infrastructure (DI), 2) support for water resources modelling (WRM), 3) user management. The web services are running on two VMs that are communicating over the internet providing services to users. The application was tested on the Zletovica river basin case study with concurrent multiple users. The application is a state-of-the-art cloud geospatial collaboration platform. The presented solution is a prototype and can be used as a foundation for developing of any specialized cloud geospatial applications. Further research will be focused on distributing the cloud application on additional VMs, testing the scalability and availability of services.

OpenSim: open-source software to create and analyze dynamic simulations of movement.

PubMed

Delp, Scott L; Anderson, Frank C; Arnold, Allison S; Loan, Peter; Habib, Ayman; John, Chand T; Guendelman, Eran; Thelen, Darryl G

2007-11-01

Dynamic simulations of movement allow one to study neuromuscular coordination, analyze athletic performance, and estimate internal loading of the musculoskeletal system. Simulations can also be used to identify the sources of pathological movement and establish a scientific basis for treatment planning. We have developed a freely available, open-source software system (OpenSim) that lets users develop models of musculoskeletal structures and create dynamic simulations of a wide variety of movements. We are using this system to simulate the dynamics of individuals with pathological gait and to explore the biomechanical effects of treatments. OpenSim provides a platform on which the biomechanics community can build a library of simulations that can be exchanged, tested, analyzed, and improved through a multi-institutional collaboration. Developing software that enables a concerted effort from many investigators poses technical and sociological challenges. Meeting those challenges will accelerate the discovery of principles that govern movement control and improve treatments for individuals with movement pathologies.

The Privacy and Security Implications of Open Data in Healthcare.

PubMed

Kobayashi, Shinji; Kane, Thomas B; Paton, Chris

2018-04-22

 The International Medical Informatics Association (IMIA) Open Source Working Group (OSWG) initiated a group discussion to discuss current privacy and security issues in the open data movement in the healthcare domain from the perspective of the OSWG membership.  Working group members independently reviewed the recent academic and grey literature and sampled a number of current large-scale open data projects to inform the working group discussion.  This paper presents an overview of open data repositories and a series of short case reports to highlight relevant issues present in the recent literature concerning the adoption of open approaches to sharing healthcare datasets. Important themes that emerged included data standardisation, the inter-connected nature of the open source and open data movements, and how publishing open data can impact on the ethics, security, and privacy of informatics projects.  The open data and open source movements in healthcare share many common philosophies and approaches including developing international collaborations across multiple organisations and domains of expertise. Both movements aim to reduce the costs of advancing scientific research and improving healthcare provision for people around the world by adopting open intellectual property licence agreements and codes of practice. Implications of the increased adoption of open data in healthcare include the need to balance the security and privacy challenges of opening data sources with the potential benefits of open data for improving research and healthcare delivery. Georg Thieme Verlag KG Stuttgart.

Jenkins-CI, an Open-Source Continuous Integration System, as a Scientific Data and Image-Processing Platform.

PubMed

Moutsatsos, Ioannis K; Hossain, Imtiaz; Agarinis, Claudia; Harbinski, Fred; Abraham, Yann; Dobler, Luc; Zhang, Xian; Wilson, Christopher J; Jenkins, Jeremy L; Holway, Nicholas; Tallarico, John; Parker, Christian N

2017-03-01

High-throughput screening generates large volumes of heterogeneous data that require a diverse set of computational tools for management, processing, and analysis. Building integrated, scalable, and robust computational workflows for such applications is challenging but highly valuable. Scientific data integration and pipelining facilitate standardized data processing, collaboration, and reuse of best practices. We describe how Jenkins-CI, an "off-the-shelf," open-source, continuous integration system, is used to build pipelines for processing images and associated data from high-content screening (HCS). Jenkins-CI provides numerous plugins for standard compute tasks, and its design allows the quick integration of external scientific applications. Using Jenkins-CI, we integrated CellProfiler, an open-source image-processing platform, with various HCS utilities and a high-performance Linux cluster. The platform is web-accessible, facilitates access and sharing of high-performance compute resources, and automates previously cumbersome data and image-processing tasks. Imaging pipelines developed using the desktop CellProfiler client can be managed and shared through a centralized Jenkins-CI repository. Pipelines and managed data are annotated to facilitate collaboration and reuse. Limitations with Jenkins-CI (primarily around the user interface) were addressed through the selection of helper plugins from the Jenkins-CI community.

Jenkins-CI, an Open-Source Continuous Integration System, as a Scientific Data and Image-Processing Platform

PubMed Central

Moutsatsos, Ioannis K.; Hossain, Imtiaz; Agarinis, Claudia; Harbinski, Fred; Abraham, Yann; Dobler, Luc; Zhang, Xian; Wilson, Christopher J.; Jenkins, Jeremy L.; Holway, Nicholas; Tallarico, John; Parker, Christian N.

2016-01-01

High-throughput screening generates large volumes of heterogeneous data that require a diverse set of computational tools for management, processing, and analysis. Building integrated, scalable, and robust computational workflows for such applications is challenging but highly valuable. Scientific data integration and pipelining facilitate standardized data processing, collaboration, and reuse of best practices. We describe how Jenkins-CI, an “off-the-shelf,” open-source, continuous integration system, is used to build pipelines for processing images and associated data from high-content screening (HCS). Jenkins-CI provides numerous plugins for standard compute tasks, and its design allows the quick integration of external scientific applications. Using Jenkins-CI, we integrated CellProfiler, an open-source image-processing platform, with various HCS utilities and a high-performance Linux cluster. The platform is web-accessible, facilitates access and sharing of high-performance compute resources, and automates previously cumbersome data and image-processing tasks. Imaging pipelines developed using the desktop CellProfiler client can be managed and shared through a centralized Jenkins-CI repository. Pipelines and managed data are annotated to facilitate collaboration and reuse. Limitations with Jenkins-CI (primarily around the user interface) were addressed through the selection of helper plugins from the Jenkins-CI community. PMID:27899692

Scalable Adaptive Graphics Environment (SAGE) Software for the Visualization of Large Data Sets on a Video Wall

NASA Technical Reports Server (NTRS)

Jedlovec, Gary; Srikishen, Jayanthi; Edwards, Rita; Cross, David; Welch, Jon; Smith, Matt

2013-01-01

The use of collaborative scientific visualization systems for the analysis, visualization, and sharing of "big data" available from new high resolution remote sensing satellite sensors or four-dimensional numerical model simulations is propelling the wider adoption of ultra-resolution tiled display walls interconnected by high speed networks. These systems require a globally connected and well-integrated operating environment that provides persistent visualization and collaboration services. This abstract and subsequent presentation describes a new collaborative visualization system installed for NASA's Shortterm Prediction Research and Transition (SPoRT) program at Marshall Space Flight Center and its use for Earth science applications. The system consists of a 3 x 4 array of 1920 x 1080 pixel thin bezel video monitors mounted on a wall in a scientific collaboration lab. The monitors are physically and virtually integrated into a 14' x 7' for video display. The display of scientific data on the video wall is controlled by a single Alienware Aurora PC with a 2nd Generation Intel Core 4.1 GHz processor, 32 GB memory, and an AMD Fire Pro W600 video card with 6 mini display port connections. Six mini display-to-dual DVI cables are used to connect the 12 individual video monitors. The open source Scalable Adaptive Graphics Environment (SAGE) windowing and media control framework, running on top of the Ubuntu 12 Linux operating system, allows several users to simultaneously control the display and storage of high resolution still and moving graphics in a variety of formats, on tiled display walls of any size. The Ubuntu operating system supports the open source Scalable Adaptive Graphics Environment (SAGE) software which provides a common environment, or framework, enabling its users to access, display and share a variety of data-intensive information. This information can be digital-cinema animations, high-resolution images, high-definition video-teleconferences, presentation slides, documents, spreadsheets or laptop screens. SAGE is cross-platform, community-driven, open-source visualization and collaboration middleware that utilizes shared national and international cyberinfrastructure for the advancement of scientific research and education.

Scalable Adaptive Graphics Environment (SAGE) Software for the Visualization of Large Data Sets on a Video Wall

NASA Astrophysics Data System (ADS)

Jedlovec, G.; Srikishen, J.; Edwards, R.; Cross, D.; Welch, J. D.; Smith, M. R.

2013-12-01

The use of collaborative scientific visualization systems for the analysis, visualization, and sharing of 'big data' available from new high resolution remote sensing satellite sensors or four-dimensional numerical model simulations is propelling the wider adoption of ultra-resolution tiled display walls interconnected by high speed networks. These systems require a globally connected and well-integrated operating environment that provides persistent visualization and collaboration services. This abstract and subsequent presentation describes a new collaborative visualization system installed for NASA's Short-term Prediction Research and Transition (SPoRT) program at Marshall Space Flight Center and its use for Earth science applications. The system consists of a 3 x 4 array of 1920 x 1080 pixel thin bezel video monitors mounted on a wall in a scientific collaboration lab. The monitors are physically and virtually integrated into a 14' x 7' for video display. The display of scientific data on the video wall is controlled by a single Alienware Aurora PC with a 2nd Generation Intel Core 4.1 GHz processor, 32 GB memory, and an AMD Fire Pro W600 video card with 6 mini display port connections. Six mini display-to-dual DVI cables are used to connect the 12 individual video monitors. The open source Scalable Adaptive Graphics Environment (SAGE) windowing and media control framework, running on top of the Ubuntu 12 Linux operating system, allows several users to simultaneously control the display and storage of high resolution still and moving graphics in a variety of formats, on tiled display walls of any size. The Ubuntu operating system supports the open source Scalable Adaptive Graphics Environment (SAGE) software which provides a common environment, or framework, enabling its users to access, display and share a variety of data-intensive information. This information can be digital-cinema animations, high-resolution images, high-definition video-teleconferences, presentation slides, documents, spreadsheets or laptop screens. SAGE is cross-platform, community-driven, open-source visualization and collaboration middleware that utilizes shared national and international cyberinfrastructure for the advancement of scientific research and education.

OpenTrials: towards a collaborative open database of all available information on all clinical trials.

PubMed

Goldacre, Ben; Gray, Jonathan

2016-04-08

OpenTrials is a collaborative and open database for all available structured data and documents on all clinical trials, threaded together by individual trial. With a versatile and expandable data schema, it is initially designed to host and match the following documents and data for each trial: registry entries; links, abstracts, or texts of academic journal papers; portions of regulatory documents describing individual trials; structured data on methods and results extracted by systematic reviewers or other researchers; clinical study reports; and additional documents such as blank consent forms, blank case report forms, and protocols. The intention is to create an open, freely re-usable index of all such information and to increase discoverability, facilitate research, identify inconsistent data, enable audits on the availability and completeness of this information, support advocacy for better data and drive up standards around open data in evidence-based medicine. The project has phase I funding. This will allow us to create a practical data schema and populate the database initially through web-scraping, basic record linkage techniques, crowd-sourced curation around selected drug areas, and import of existing sources of structured and documents. It will also allow us to create user-friendly web interfaces onto the data and conduct user engagement workshops to optimise the database and interface designs. Where other projects have set out to manually and perfectly curate a narrow range of information on a smaller number of trials, we aim to use a broader range of techniques and attempt to match a very large quantity of information on all trials. We are currently seeking feedback and additional sources of structured data.

Open core control software for surgical robots.

PubMed

Arata, Jumpei; Kozuka, Hiroaki; Kim, Hyung Wook; Takesue, Naoyuki; Vladimirov, B; Sakaguchi, Masamichi; Tokuda, Junichi; Hata, Nobuhiko; Chinzei, Kiyoyuki; Fujimoto, Hideo

2010-05-01

In these days, patients and doctors in operation room are surrounded by many medical devices as resulting from recent advancement of medical technology. However, these cutting-edge medical devices are working independently and not collaborating with each other, even though the collaborations between these devices such as navigation systems and medical imaging devices are becoming very important for accomplishing complex surgical tasks (such as a tumor removal procedure while checking the tumor location in neurosurgery). On the other hand, several surgical robots have been commercialized, and are becoming common. However, these surgical robots are not open for collaborations with external medical devices in these days. A cutting-edge "intelligent surgical robot" will be possible in collaborating with surgical robots, various kinds of sensors, navigation system and so on. On the other hand, most of the academic software developments for surgical robots are "home-made" in their research institutions and not open to the public. Therefore, open source control software for surgical robots can be beneficial in this field. From these perspectives, we developed Open Core Control software for surgical robots to overcome these challenges. In general, control softwares have hardware dependencies based on actuators, sensors and various kinds of internal devices. Therefore, these control softwares cannot be used on different types of robots without modifications. However, the structure of the Open Core Control software can be reused for various types of robots by abstracting hardware dependent parts. In addition, network connectivity is crucial for collaboration between advanced medical devices. The OpenIGTLink is adopted in Interface class which plays a role to communicate with external medical devices. At the same time, it is essential to maintain the stable operation within the asynchronous data transactions through network. In the Open Core Control software, several techniques for this purpose were introduced. Virtual fixture is well known technique as a "force guide" for supporting operators to perform precise manipulation by using a master-slave robot. The virtual fixture for precise and safety surgery was implemented on the system to demonstrate an idea of high-level collaboration between a surgical robot and a navigation system. The extension of virtual fixture is not a part of the Open Core Control system, however, the function such as virtual fixture cannot be realized without a tight collaboration between cutting-edge medical devices. By using the virtual fixture, operators can pre-define an accessible area on the navigation system, and the area information can be transferred to the robot. In this manner, the surgical console generates the reflection force when the operator tries to get out from the pre-defined accessible area during surgery. The Open Core Control software was implemented on a surgical master-slave robot and stable operation was observed in a motion test. The tip of the surgical robot was displayed on a navigation system by connecting the surgical robot with a 3D position sensor through the OpenIGTLink. The accessible area was pre-defined before the operation, and the virtual fixture was displayed as a "force guide" on the surgical console. In addition, the system showed stable performance in a duration test with network disturbance. In this paper, a design of the Open Core Control software for surgical robots and the implementation of virtual fixture were described. The Open Core Control software was implemented on a surgical robot system and showed stable performance in high-level collaboration works. The Open Core Control software is developed to be a widely used platform of surgical robots. Safety issues are essential for control software of these complex medical devices. It is important to follow the global specifications such as a FDA requirement "General Principles of Software Validation" or IEC62304. For following these regulations, it is important to develop a self-test environment. Therefore, a test environment is now under development to test various interference in operation room such as a noise of electric knife by considering safety and test environment regulations such as ISO13849 and IEC60508. The Open Core Control software is currently being developed software in open-source manner and available on the Internet. A communization of software interface is becoming a major trend in this field. Based on this perspective, the Open Core Control software can be expected to bring contributions in this field.

Dynamic mobility applications open source application development portal : Task 3.3 : concept of operations : final report.

DOT National Transportation Integrated Search

2016-10-12

The Dynamic Mobility Applications (DMA) program seeks to promote the highest level of collaboration and preservation of intellectual capital generated from application development and associated research activities funded by the program. The program ...

An Evolving Worldview: Making Open Source Easy

NASA Technical Reports Server (NTRS)

Rice, Zachary

2017-01-01

NASA Worldview is an interactive interface for browsing full-resolution, global satellite imagery. Worldview supports an open data policy so that academia, private industries and the general public can use NASA's satellite data to address Earth science related issues. Worldview was open sourced in 2014. By shifting to an open source approach, the Worldview application has evolved to better serve end-users. Project developers are able to have discussions with end-users and community developers to understand issues and develop new features. New developers are able to track upcoming features, collaborate on them and make their own contributions. Getting new developers to contribute to the project has been one of the most important and difficult aspects of open sourcing Worldview. A focus has been made on making the installation of Worldview simple to reduce the initial learning curve and make contributing code easy. One way we have addressed this is through a simplified setup process. Our setup documentation includes a set of prerequisites and a set of straight forward commands to clone, configure, install and run. This presentation will emphasis our focus to simplify and standardize Worldview's open source code so more people are able to contribute. The more people who contribute, the better the application will become over time.

Community-based Early Warning and Adaptive Response System (EWARS) for mosquito borne diseases: An open source/open community approach

NASA Astrophysics Data System (ADS)

Babu, A. N.; Soman, B.; Niehaus, E.; Shah, J.; Sarda, N. L.; Ramkumar, P. S.; Unnithan, C.

2014-11-01

A variety of studies around the world have evaluated the use of remote sensing with and without GIS in communicable diseases. The ongoing Ebola epidemic has highlighted the risks that can arise for the global community from rapidly spreading diseases which may outpace attempts at control and eradication. This paper presents an approach to the development, deployment, validation and wide-spread adoption of a GIS-based temporo-spatial decision support system which is being collaboratively developed in open source/open community mode by an international group that came together under UN auspices. The group believes in an open source/open community approach to make the fruits of knowledge as widely accessible as possible. A core initiative of the groups is the EWARS project. It proposes to strengthen existing public health systems by the development and validation a model for a community based surveillance and response system which will initially address mosquito borne diseases in the developing world. At present mathematical modeling to support EWARS is at an advanced state, and it planned to embark on a pilot project

Virtualization of open-source secure web services to support data exchange in a pediatric critical care research network

PubMed Central

Sward, Katherine A; Newth, Christopher JL; Khemani, Robinder G; Cryer, Martin E; Thelen, Julie L; Enriquez, Rene; Shaoyu, Su; Pollack, Murray M; Harrison, Rick E; Meert, Kathleen L; Berg, Robert A; Wessel, David L; Shanley, Thomas P; Dalton, Heidi; Carcillo, Joseph; Jenkins, Tammara L; Dean, J Michael

2015-01-01

Objectives To examine the feasibility of deploying a virtual web service for sharing data within a research network, and to evaluate the impact on data consistency and quality. Material and Methods Virtual machines (VMs) encapsulated an open-source, semantically and syntactically interoperable secure web service infrastructure along with a shadow database. The VMs were deployed to 8 Collaborative Pediatric Critical Care Research Network Clinical Centers. Results Virtual web services could be deployed in hours. The interoperability of the web services reduced format misalignment from 56% to 1% and demonstrated that 99% of the data consistently transferred using the data dictionary and 1% needed human curation. Conclusions Use of virtualized open-source secure web service technology could enable direct electronic abstraction of data from hospital databases for research purposes. PMID:25796596

psiTurk: An open-source framework for conducting replicable behavioral experiments online.

PubMed

Gureckis, Todd M; Martin, Jay; McDonnell, John; Rich, Alexander S; Markant, Doug; Coenen, Anna; Halpern, David; Hamrick, Jessica B; Chan, Patricia

2016-09-01

Online data collection has begun to revolutionize the behavioral sciences. However, conducting carefully controlled behavioral experiments online introduces a number of new of technical and scientific challenges. The project described in this paper, psiTurk, is an open-source platform which helps researchers develop experiment designs which can be conducted over the Internet. The tool primarily interfaces with Amazon's Mechanical Turk, a popular crowd-sourcing labor market. This paper describes the basic architecture of the system and introduces new users to the overall goals. psiTurk aims to reduce the technical hurdles for researchers developing online experiments while improving the transparency and collaborative nature of the behavioral sciences.

scikit-image: image processing in Python

PubMed Central

Schönberger, Johannes L.; Nunez-Iglesias, Juan; Boulogne, François; Warner, Joshua D.; Yager, Neil; Gouillart, Emmanuelle; Yu, Tony

2014-01-01

scikit-image is an image processing library that implements algorithms and utilities for use in research, education and industry applications. It is released under the liberal Modified BSD open source license, provides a well-documented API in the Python programming language, and is developed by an active, international team of collaborators. In this paper we highlight the advantages of open source to achieve the goals of the scikit-image library, and we showcase several real-world image processing applications that use scikit-image. More information can be found on the project homepage, http://scikit-image.org. PMID:25024921

Adopting Open Source Software to Address Software Risks during the Scientific Data Life Cycle

NASA Astrophysics Data System (ADS)

Vinay, S.; Downs, R. R.

2012-12-01

Software enables the creation, management, storage, distribution, discovery, and use of scientific data throughout the data lifecycle. However, the capabilities offered by software also present risks for the stewardship of scientific data, since future access to digital data is dependent on the use of software. From operating systems to applications for analyzing data, the dependence of data on software presents challenges for the stewardship of scientific data. Adopting open source software provides opportunities to address some of the proprietary risks of data dependence on software. For example, in some cases, open source software can be deployed to avoid licensing restrictions for using, modifying, and transferring proprietary software. The availability of the source code of open source software also enables the inclusion of modifications, which may be contributed by various community members who are addressing similar issues. Likewise, an active community that is maintaining open source software can be a valuable source of help, providing an opportunity to collaborate to address common issues facing adopters. As part of the effort to meet the challenges of software dependence for scientific data stewardship, risks from software dependence have been identified that exist during various times of the data lifecycle. The identification of these risks should enable the development of plans for mitigating software dependencies, where applicable, using open source software, and to improve understanding of software dependency risks for scientific data and how they can be reduced during the data life cycle.

Recent progress in Open Data production and consumption - examples from a Governmental institute (SMHI) and a collaborative EU research project (SWITCH-ON)

NASA Astrophysics Data System (ADS)

Arheimer, Berit; Falkenroth, Esa

2014-05-01

The Swedish Meteorological and Hydrological Institute (SMHI) has a long tradition both in producing and consuming open data on a national, European and global scale. It is also promoting community building among water scientists in Europe by participating in and initiating collaborative projects. This presentation will exemplify the contemporary European movement imposed by the INSPIRE directive and the Open Data Strategy, by showing the progress in openness and shift in attitudes during the last decade when handling Research Data and Public Sector Information at a national European institute. Moreover, the presentation will inform about a recently started collaborative project (EU FP7 project No 603587) coordinated by SMHI and called SWITCH-ON http://water-switch-on.eu/. The project addresses water concerns and currently untapped potential of open data for improved water management across the EU. The overall goal of the project is to make use of open data, and add value to society by repurposing and refining data from various sources. SWITCH-ON will establish new forms of water research and facilitate the development of new products and services based on principles of sharing and community building in the water society. The SWITCH-ON objectives are to use open data for implementing: 1) an innovative spatial information platform with open data tailored for direct water assessments, 2) an entirely new form of collaborative research for water-related sciences, 3) fourteen new operational products and services dedicated to appointed end-users, 4) new business and knowledge to inform individual and collective decisions in line with the Europe's smart growth and environmental objectives. The presentation will discuss challenges, progress and opportunities with the open data strategy, based on the experiences from working both at a Governmental institute and being part of the global research community.

Do It Yourself (DIY) Earth Science Collaboratories Using Best Practices and Breakthrough Technologies

NASA Astrophysics Data System (ADS)

Stephan, E.

2017-12-01

The objective of published earth science study data results and literature on the Web should be to provide a means to integrate discoverable science resources through an open collaborative-Web. At the core of any open science collaborative infrastructure is the ability to discover, manage and ultimately use relevant data accessible to the collaboration. Equally important are the relationships between people, applications, services, and publications, which capture critical contextual knowledge that enable their effective use. While contributions of either irreproducible or costly data can be a great asset the inability of users being able to use the data intelligently or make sense of it, makes these investments not usable. An ability to describe ad-hoc discoverable usage methodologies, provide feedback to data producers, and identify and cite data in a systematic way by leveraging existing Web-enabled off the shelf technology is needed. Fortunately many break-through advancements in data publication best practices and government, open source, and commercial investments support consumers who can provide feedback, share experiences, and contribute back to the earth science ecosystem.

The Academic Research Centre: A Vital Link between Industry and Higher Education.

ERIC Educational Resources Information Center

Steiner, Karl V.; Kukich, Diane S.

1995-01-01

The Center for Composite Materials at the University of Delaware opens up new funding sources and collaborative research opportunities and enhances student skills. Government-sponsored research is focusing on real-world problems in close cooperation with industry. (SK)

Online molecular image repository and analysis system: A multicenter collaborative open-source infrastructure for molecular imaging research and application.

PubMed

Rahman, Mahabubur; Watabe, Hiroshi

2018-05-01

Molecular imaging serves as an important tool for researchers and clinicians to visualize and investigate complex biochemical phenomena using specialized instruments; these instruments are either used individually or in combination with targeted imaging agents to obtain images related to specific diseases with high sensitivity, specificity, and signal-to-noise ratios. However, molecular imaging, which is a multidisciplinary research field, faces several challenges, including the integration of imaging informatics with bioinformatics and medical informatics, requirement of reliable and robust image analysis algorithms, effective quality control of imaging facilities, and those related to individualized disease mapping, data sharing, software architecture, and knowledge management. As a cost-effective and open-source approach to address these challenges related to molecular imaging, we develop a flexible, transparent, and secure infrastructure, named MIRA, which stands for Molecular Imaging Repository and Analysis, primarily using the Python programming language, and a MySQL relational database system deployed on a Linux server. MIRA is designed with a centralized image archiving infrastructure and information database so that a multicenter collaborative informatics platform can be built. The capability of dealing with metadata, image file format normalization, and storing and viewing different types of documents and multimedia files make MIRA considerably flexible. With features like logging, auditing, commenting, sharing, and searching, MIRA is useful as an Electronic Laboratory Notebook for effective knowledge management. In addition, the centralized approach for MIRA facilitates on-the-fly access to all its features remotely through any web browser. Furthermore, the open-source approach provides the opportunity for sustainable continued development. MIRA offers an infrastructure that can be used as cross-boundary collaborative MI research platform for the rapid achievement in cancer diagnosis and therapeutics. Copyright © 2018 Elsevier Ltd. All rights reserved.

Cloud-based Jupyter Notebooks for Water Data Analysis

NASA Astrophysics Data System (ADS)

Castronova, A. M.; Brazil, L.; Seul, M.

2017-12-01

The development and adoption of technologies by the water science community to improve our ability to openly collaborate and share workflows will have a transformative impact on how we address the challenges associated with collaborative and reproducible scientific research. Jupyter notebooks offer one solution by providing an open-source platform for creating metadata-rich toolchains for modeling and data analysis applications. Adoption of this technology within the water sciences, coupled with publicly available datasets from agencies such as USGS, NASA, and EPA enables researchers to easily prototype and execute data intensive toolchains. Moreover, implementing this software stack in a cloud-based environment extends its native functionality to provide researchers a mechanism to build and execute toolchains that are too large or computationally demanding for typical desktop computers. Additionally, this cloud-based solution enables scientists to disseminate data processing routines alongside journal publications in an effort to support reproducibility. For example, these data collection and analysis toolchains can be shared, archived, and published using the HydroShare platform or downloaded and executed locally to reproduce scientific analysis. This work presents the design and implementation of a cloud-based Jupyter environment and its application for collecting, aggregating, and munging various datasets in a transparent, sharable, and self-documented manner. The goals of this work are to establish a free and open source platform for domain scientists to (1) conduct data intensive and computationally intensive collaborative research, (2) utilize high performance libraries, models, and routines within a pre-configured cloud environment, and (3) enable dissemination of research products. This presentation will discuss recent efforts towards achieving these goals, and describe the architectural design of the notebook server in an effort to support collaborative and reproducible science.

Navigating the unfolding open data landscape in ecology and evolution.

PubMed

Culina, Antica; Baglioni, Miriam; Crowther, Tom W; Visser, Marcel E; Woutersen-Windhouwer, Saskia; Manghi, Paolo

2018-03-01

Open access to data is revolutionizing the sciences. To allow ecologists and evolutionary biologists to confidently find and use the existing data, we provide an overview of the landscape of online data infrastructures, and highlight the key points to consider when using open data. We introduce an online collaborative platform to keep a community-driven, updated list of the best sources that enable search for data in one interface. In doing so, our aim is to lower the barrier to accessing open data, and encourage its use by researchers hoping to increase the scope, reliability and value of their findings.

Collaborative data model and data base development for paleoenvironmental and archaeological domain using Semantic MediaWiki

NASA Astrophysics Data System (ADS)

Willmes, C.

2017-12-01

In the frame of the Collaborative Research Centre 806 (CRC 806) an interdisciplinary research project, that needs to manage data, information and knowledge from heterogeneous domains, such as archeology, cultural sciences, and the geosciences, a collaborative internal knowledge base system was developed. The system is based on the open source MediaWiki software, that is well known as the software that enables Wikipedia, for its facilitation of a web based collaborative knowledge and information management platform. This software is additionally enhanced with the Semantic MediaWiki (SMW) extension, that allows to store and manage structural data within the Wiki platform, as well as it facilitates complex query and API interfaces to the structured data stored in the SMW data base. Using an additional open source software called mobo, it is possible to improve the data model development process, as well as automated data imports, from small spreadsheets to large relational databases. Mobo is a command line tool that helps building and deploying SMW structure in an agile, Schema-Driven Development way, and allows to manage and collaboratively develop the data model formalizations, that are formalized in JSON-Schema format, using version control systems like git. The combination of a well equipped collaborative web platform facilitated by Mediawiki, the possibility to store and query structured data in this collaborative database provided by SMW, as well as the possibility for automated data import and data model development enabled by mobo, result in a powerful but flexible system to build and develop a collaborative knowledge base system. Furthermore, SMW allows the application of Semantic Web technology, the structured data can be exported into RDF, thus it is possible to set a triple-store including a SPARQL endpoint on top of the database. The JSON-Schema based data models, can be enhanced into JSON-LD, to facilitate and profit from the possibilities of Linked Data technology.

Building CHAOS: An Operating System for Livermore Linux Clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garlick, J E; Dunlap, C M

2003-02-21

The Livermore Computing (LC) Linux Integration and Development Project (the Linux Project) produces and supports the Clustered High Availability Operating System (CHAOS), a cluster operating environment based on Red Hat Linux. Each CHAOS release begins with a set of requirements and ends with a formally tested, packaged, and documented release suitable for use on LC's production Linux clusters. One characteristic of CHAOS is that component software packages come from different sources under varying degrees of project control. Some are developed by the Linux Project, some are developed by other LC projects, some are external open source projects, and some aremore » commercial software packages. A challenge to the Linux Project is to adhere to release schedules and testing disciplines in a diverse, highly decentralized development environment. Communication channels are maintained for externally developed packages in order to obtain support, influence development decisions, and coordinate/understand release schedules. The Linux Project embraces open source by releasing locally developed packages under open source license, by collaborating with open source projects where mutually beneficial, and by preferring open source over proprietary software. Project members generally use open source development tools. The Linux Project requires system administrators and developers to work together to resolve problems that arise in production. This tight coupling of production and development is a key strategy for making a product that directly addresses LC's production requirements. It is another challenge to balance support and development activities in such a way that one does not overwhelm the other.« less

DEVELOPMENT AND APPLICATION OF THE DORIAN (DOSE-RESPONSE INFORMATION ANALYSIS) SYSTEM

EPA Science Inventory

• Migration of ArrayTrack from the proprietary Oracle database to open source Postgres database.
• Making the public version of the ebKB available with provisions for soliciting input from collaborators and outside users.
• Continued development ...

• Neural ensemble communities: Open-source approaches to hardware for large-scale electrophysiology

  PubMed Central

  Siegle, Joshua H.; Hale, Gregory J.; Newman, Jonathan P.; Voigts, Jakob

  2014-01-01

  One often-overlooked factor when selecting a platform for large-scale electrophysiology is whether or not a particular data acquisition system is “open” or “closed”: that is, whether or not the system’s schematics and source code are available to end users. Open systems have a reputation for being difficult to acquire, poorly documented, and hard to maintain. With the arrival of more powerful and compact integrated circuits, rapid prototyping services, and web-based tools for collaborative development, these stereotypes must be reconsidered. We discuss some of the reasons why multichannel extracellular electrophysiology could benefit from open-source approaches and describe examples of successful community-driven tool development within this field. In order to promote the adoption of open-source hardware and to reduce the need for redundant development efforts, we advocate a move toward standardized interfaces that connect each element of the data processing pipeline. This will give researchers the flexibility to modify their tools when necessary, while allowing them to continue to benefit from the high-quality products and expertise provided by commercial vendors. PMID:25528614

• Development of a web application for water resources based on open source software

  NASA Astrophysics Data System (ADS)

  Delipetrev, Blagoj; Jonoski, Andreja; Solomatine, Dimitri P.

  2014-01-01

  This article presents research and development of a prototype web application for water resources using latest advancements in Information and Communication Technologies (ICT), open source software and web GIS. The web application has three web services for: (1) managing, presenting and storing of geospatial data, (2) support of water resources modeling and (3) water resources optimization. The web application is developed using several programming languages (PhP, Ajax, JavaScript, Java), libraries (OpenLayers, JQuery) and open source software components (GeoServer, PostgreSQL, PostGIS). The presented web application has several main advantages: it is available all the time, it is accessible from everywhere, it creates a real time multi-user collaboration platform, the programing languages code and components are interoperable and designed to work in a distributed computer environment, it is flexible for adding additional components and services and, it is scalable depending on the workload. The application was successfully tested on a case study with concurrent multi-users access.

• Public Lab: Community-Based Approaches to Urban and Environmental Health and Justice.

  PubMed

  Rey-Mazón, Pablo; Keysar, Hagit; Dosemagen, Shannon; D'Ignazio, Catherine; Blair, Don

  2018-06-01

  This paper explores three cases of Do-It-Yourself, open-source technologies developed within the diverse array of topics and themes in the communities around the Public Laboratory for Open Technology and Science (Public Lab). These cases focus on aerial mapping, water quality monitoring and civic science practices. The techniques discussed have in common the use of accessible, community-built technologies for acquiring data. They are also concerned with embedding collaborative and open source principles into the objects, tools, social formations and data sharing practices that emerge from these inquiries. The focus is on developing processes of collaborative design and experimentation through material engagement with technology and issues of concern. Problem-solving, here, is a tactic, while the strategy is an ongoing engagement with the problem of participation in its technological, social and political dimensions especially considering the increasing centralization and specialization of scientific and technological expertise. The authors also discuss and reflect on the Public Lab's approach to civic science in light of ideas and practices of citizen/civic veillance, or "sousveillance", by emphasizing people before data, and by investigating the new ways of seeing and doing that this shift in perspective might provide.

• Arctic Collaborative Environment: A New Multi-National Partnership for Arctic Science and Decision Support

  NASA Technical Reports Server (NTRS)

  Laymon, Charles A,; Kress, Martin P.; McCracken, Jeff E.; Spehn, Stephen L.; Tanner, Steve

  2011-01-01

  The Arctic Collaborative Environment (ACE) project is a new international partnership for information sharing to meet the challenges of addressing Arctic. The goal of ACE is to create an open source, web-based, multi-national monitoring, analysis, and visualization decision-support system for Arctic environmental assessment, management, and sustainability. This paper will describe the concept, system architecture, and data products that are being developed and disseminated among partners and independent users through remote access.

• Public Access to Digital Material; A Call to Researchers: Digital Libraries Need Collaboration across Disciplines; Greenstone: Open-Source Digital Library Software; Retrieval Issues for the Colorado Digitization Project's Heritage Database; Report on the 5th European Conference on Digital Libraries, ECDL 2001; Report on the First Joint Conference on Digital Libraries.

  ERIC Educational Resources Information Center

  Kahle, Brewster; Prelinger, Rick; Jackson, Mary E.; Boyack, Kevin W.; Wylie, Brian N.; Davidson, George S.; Witten, Ian H.; Bainbridge, David; Boddie, Stefan J.; Garrison, William A.; Cunningham, Sally Jo; Borgman, Christine L.; Hessel, Heather

  2001-01-01

  These six articles discuss various issues relating to digital libraries. Highlights include public access to digital materials; intellectual property concerns; the need for collaboration across disciplines; Greenstone software for construction and presentation of digital information collections; the Colorado Digitization Project; and conferences…

• Long distance education for croatian nurses with open source software.

  PubMed

  Radenovic, Aleksandar; Kalauz, Sonja

  2006-01-01

  Croatian Nursing Informatics Association (CNIA) has been established as result of continuing work on promoting nursing informatics in Croatia. Main goals of CNIA are promoting nursing informatics and education of nurses about nursing informatics and using information technology in nursing process. CNIA in start of work is developed three courses from nursing informatics all designed with support of long distance education with open source software. Courses are: A - 'From Data to Wisdom', B - 'Introduction to Nursing Informatics' and C - 'Nursing Informatics I'. Courses A and B are obligatory for C course. Technology used to implement these online courses is based on the open source Learning Management System (LMS), Claroline, free online collaborative learning platform. Courses are divided in two modules/days. First module/day participants have classical approach to education and second day with E-learning from home. These courses represent first courses from nursing informatics' and first long distance education for nurses also.

• Implementation and Testing of Low Cost Uav Platform for Orthophoto Imaging

  NASA Astrophysics Data System (ADS)

  Brucas, D.; Suziedelyte-Visockiene, J.; Ragauskas, U.; Berteska, E.; Rudinskas, D.

  2013-08-01

  Implementation of Unmanned Aerial Vehicles for civilian applications is rapidly increasing. Technologies which were expensive and available only for military use have recently spread on civilian market. There is a vast number of low cost open source components and systems for implementation on UAVs available. Using of low cost hobby and open source components ensures considerable decrease of UAV price, though in some cases compromising its reliability. In Space Science and Technology Institute (SSTI) in collaboration with Vilnius Gediminas Technical University (VGTU) researches have been performed in field of constructing and implementation of small UAVs composed of low cost open source components (and own developments). Most obvious and simple implementation of such UAVs - orthophoto imaging with data download and processing after the flight. The construction, implementation of UAVs, flight experience, data processing and data implementation will be further covered in the paper and presentation.

• NASA as a Convener: Government, Academic and Industry Collaborations Through the NASA Human Health and Performance Center

  NASA Technical Reports Server (NTRS)

  Davis, Jeffrey R.; Richard, Elizabeth E.

  2011-01-01

  On October 18, 2010, the NASA Human Health and Performance center (NHHPC) was opened to enable collaboration among government, academic and industry members. Membership rapidly grew to 60 members (http://nhhpc.nasa.gov ) and members began identifying collaborative projects as detailed below. In addition, a first workshop in open collaboration and innovation was conducted on January 19, 2011 by the NHHPC resulting in additional challenges and projects for further development. This first workshop was a result of the SLSD successes in running open innovation challenges over the past two years. In 2008, the NASA Johnson Space Center, Space Life Sciences Directorate (SLSD) began pilot projects in open innovation (crowd sourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical problems. From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external challenges were conducted through three different vendors: InnoCentive, Yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive platform, customized to NASA use, and promoted as NASA@Work. The results from the 34 challenges involved not only technical solutions that were reported previously at the 61st IAC, but also the formation of new collaborative relationships. For example, the TopCoder pilot was expanded by the NASA Space Operations Mission Directorate to the NASA Tournament Lab in collaboration with Harvard Business School and TopCoder. Building on these initial successes, the NHHPC workshop in January of 2011, and ongoing NHHPC member discussions, several important collaborations are in development: Space Act Agreement between NASA and GE for collaborative projects, NASA and academia for a Visual Impairment / Intracranial Hypertension summit (February 2011), NASA and the DoD through the Defense Venture Catalyst Initiative (DeVenCI) for a technical needs workshop (June 2011), NASA and the San Diego Zoo in Biomimicry, NASA and the FAA Center of Excellence for Commercial Space Flight for collaborative projects, NASA and the FDA concerning automatic external defibrillators, and NASA and Tufts University for an education pilot. These and other collaborations will be detailed in the paper demonstrating that a government-sponsored convening entity (the NHHPC) can facilitate industry, academic, and non-profit collaborations for products of mutual benefit.

• Building an open academic environment – a new approach to empowering students in their learning of anatomy through ‘Shadow Modules’

  PubMed Central

  Scott, Jonathan L; Moxham, Bernard J; Rutherford, Stephen M

  2014-01-01

  Teaching and learning in anatomy is undertaken by a variety of methodologies, yet all of these pedagogies benefit from students discussing and reflecting upon their learning activities. An approach of particular potency is peer-mediated learning, through either peer-teaching or collaborative peer-learning. Collaborative, peer-mediated, learning activities help promote deep learning approaches and foster communities of practice in learning. Students generally flourish in collaborative learning settings but there are limitations to the benefits of collaborative learning undertaken solely within the confines of modular curricula. We describe the development of peer-mediated learning through student-focused and student-led study groups we have termed ‘Shadow Modules’. The ‘Shadow Module’ takes place parallel to the formal academically taught module and facilitates collaboration between students to support their learning for that module. In ‘Shadow Module’ activities, students collaborate towards curating existing online open resources as well as developing learning resources of their own to support their study. Through the use of communication technologies and web 2.0 tools these resources are able to be shared with their peers, thus enhancing the learning experience of all students following the module. The Shadow Module activities have the potential to lead to participants feeling a greater sense of engagement with the subject material, as well as improving their study and group-working skills and developing digital literacy. The outputs from Shadow Module collaborative work are open-source and may be utilised by subsequent student cohorts, thus building up a repository of learning resources designed by and for students. Shadow Module activities would benefit all pedagogies in the study of anatomy, and support students moving from being passive consumers to active participants in learning. PMID:24117249

• Building an open academic environment - a new approach to empowering students in their learning of anatomy through 'Shadow Modules'.

  PubMed

  Scott, Jonathan L; Moxham, Bernard J; Rutherford, Stephen M

  2014-03-01

  Teaching and learning in anatomy is undertaken by a variety of methodologies, yet all of these pedagogies benefit from students discussing and reflecting upon their learning activities. An approach of particular potency is peer-mediated learning, through either peer-teaching or collaborative peer-learning. Collaborative, peer-mediated, learning activities help promote deep learning approaches and foster communities of practice in learning. Students generally flourish in collaborative learning settings but there are limitations to the benefits of collaborative learning undertaken solely within the confines of modular curricula. We describe the development of peer-mediated learning through student-focused and student-led study groups we have termed 'Shadow Modules'. The 'Shadow Module' takes place parallel to the formal academically taught module and facilitates collaboration between students to support their learning for that module. In 'Shadow Module' activities, students collaborate towards curating existing online open resources as well as developing learning resources of their own to support their study. Through the use of communication technologies and Web 2.0 tools these resources are able to be shared with their peers, thus enhancing the learning experience of all students following the module. The Shadow Module activities have the potential to lead to participants feeling a greater sense of engagement with the subject material, as well as improving their study and group-working skills and developing digital literacy. The outputs from Shadow Module collaborative work are open-source and may be utilised by subsequent student cohorts, thus building up a repository of learning resources designed by and for students. Shadow Module activities would benefit all pedagogies in the study of anatomy, and support students moving from being passive consumers to active participants in learning. © 2013 Anatomical Society.

• The importance of using open source technologies and common standards for interoperability within eHealth: Perspectives from the Millennium Villages Project

  PubMed Central

  Borland, Rob; Barasa, Mourice; Iiams-Hauser, Casey; Velez, Olivia; Kaonga, Nadi Nina; Berg, Matt

  2013-01-01

  The purpose of this paper is to illustrate the importance of using open source technologies and common standards for interoperability when implementing eHealth systems and illustrate this through case studies, where possible. The sources used to inform this paper draw from the implementation and evaluation of the eHealth Program in the context of the Millennium Villages Project (MVP). As the eHealth Team was tasked to deploy an eHealth architecture, the Millennium Villages Global-Network (MVG-Net), across all fourteen of the MVP sites in Sub-Saharan Africa, the team recognized the need for standards and uniformity but also realized that context would be an important factor. Therefore, the team decided to utilize open source solutions. The MVP implementation of MVG-Net provides a model for those looking to implement informatics solutions across disciplines and countries. Furthermore, there are valuable lessons learned that the eHealth community can benefit from. By sharing lessons learned and developing an accessible, open-source eHealth platform, we believe that we can more efficiently and rapidly achieve the health-related and collaborative Millennium Development Goals (MDGs). PMID:22894051

• Sharing Water-related Information to Tackle Changes in the Hydrosphere - for Operational Needs (SWITCH-ON)

  NASA Astrophysics Data System (ADS)

  Arheimer, Berit

  2015-04-01

  Recently, a collaborative EU project started called SWITCH-ON (EU FP7 project No 603587) coordinated by SMHI to support the INSPIRE directive and the Open Data Strategy. The overall goal of the project is to establish a "one-stop-shop" web portal for easy access to European water information. The project will use open data, provide infrastructure for sharing and collaboration, and add value to society and research by repurposing and refining data from various sources. The SWITCH-ON project http://www.water-switch-on.eu/ will establish new forms of water research and facilitate the development of new products and services based on principles of sharing and community building in the water society. The SWITCH-ON objectives are to use open data for implementing: 1) an innovative spatial information platform (SIP) to find, bind, transform and publish data, 2) entirely new forms of collaborative research organised in a Virtual Water-Science Laboratory, open for any research group, 3) fourteen new operational products for water management and awareness, 4) outreach facilities for new water business and knowledge in line with the Europe's smart growth and environmental objectives. This poster will describe the overall project goals and especially the recent progress on developing a Virtual Water-Science Laboratory. Contact: waterswitchon@gmail.com

• Brainstorm: A User-Friendly Application for MEG/EEG Analysis

  PubMed Central

  Tadel, François; Baillet, Sylvain; Mosher, John C.; Pantazis, Dimitrios; Leahy, Richard M.

  2011-01-01

  Brainstorm is a collaborative open-source application dedicated to magnetoencephalography (MEG) and electroencephalography (EEG) data visualization and processing, with an emphasis on cortical source estimation techniques and their integration with anatomical magnetic resonance imaging (MRI) data. The primary objective of the software is to connect MEG/EEG neuroscience investigators with both the best-established and cutting-edge methods through a simple and intuitive graphical user interface (GUI). PMID:21584256

• The Experiment Factory: Standardizing Behavioral Experiments.

  PubMed

  Sochat, Vanessa V; Eisenberg, Ian W; Enkavi, A Zeynep; Li, Jamie; Bissett, Patrick G; Poldrack, Russell A

  2016-01-01

  The administration of behavioral and experimental paradigms for psychology research is hindered by lack of a coordinated effort to develop and deploy standardized paradigms. While several frameworks (Mason and Suri, 2011; McDonnell et al., 2012; de Leeuw, 2015; Lange et al., 2015) have provided infrastructure and methods for individual research groups to develop paradigms, missing is a coordinated effort to develop paradigms linked with a system to easily deploy them. This disorganization leads to redundancy in development, divergent implementations of conceptually identical tasks, disorganized and error-prone code lacking documentation, and difficulty in replication. The ongoing reproducibility crisis in psychology and neuroscience research (Baker, 2015; Open Science Collaboration, 2015) highlights the urgency of this challenge: reproducible research in behavioral psychology is conditional on deployment of equivalent experiments. A large, accessible repository of experiments for researchers to develop collaboratively is most efficiently accomplished through an open source framework. Here we present the Experiment Factory, an open source framework for the development and deployment of web-based experiments. The modular infrastructure includes experiments, virtual machines for local or cloud deployment, and an application to drive these components and provide developers with functions and tools for further extension. We release this infrastructure with a deployment (http://www.expfactory.org) that researchers are currently using to run a set of over 80 standardized web-based experiments on Amazon Mechanical Turk. By providing open source tools for both deployment and development, this novel infrastructure holds promise to bring reproducibility to the administration of experiments, and accelerate scientific progress by providing a shared community resource of psychological paradigms.

• The Experiment Factory: Standardizing Behavioral Experiments

  PubMed Central

  Sochat, Vanessa V.; Eisenberg, Ian W.; Enkavi, A. Zeynep; Li, Jamie; Bissett, Patrick G.; Poldrack, Russell A.

  2016-01-01

  The administration of behavioral and experimental paradigms for psychology research is hindered by lack of a coordinated effort to develop and deploy standardized paradigms. While several frameworks (Mason and Suri, 2011; McDonnell et al., 2012; de Leeuw, 2015; Lange et al., 2015) have provided infrastructure and methods for individual research groups to develop paradigms, missing is a coordinated effort to develop paradigms linked with a system to easily deploy them. This disorganization leads to redundancy in development, divergent implementations of conceptually identical tasks, disorganized and error-prone code lacking documentation, and difficulty in replication. The ongoing reproducibility crisis in psychology and neuroscience research (Baker, 2015; Open Science Collaboration, 2015) highlights the urgency of this challenge: reproducible research in behavioral psychology is conditional on deployment of equivalent experiments. A large, accessible repository of experiments for researchers to develop collaboratively is most efficiently accomplished through an open source framework. Here we present the Experiment Factory, an open source framework for the development and deployment of web-based experiments. The modular infrastructure includes experiments, virtual machines for local or cloud deployment, and an application to drive these components and provide developers with functions and tools for further extension. We release this infrastructure with a deployment (http://www.expfactory.org) that researchers are currently using to run a set of over 80 standardized web-based experiments on Amazon Mechanical Turk. By providing open source tools for both deployment and development, this novel infrastructure holds promise to bring reproducibility to the administration of experiments, and accelerate scientific progress by providing a shared community resource of psychological paradigms. PMID:27199843

• Stewardship and management challenges within a cloud-based open data ecosystem (Invited Paper 211863)

  NASA Astrophysics Data System (ADS)

  Kearns, E. J.

  2017-12-01

  NOAA's Big Data Project is conducting an experiment in the collaborative distribution of open government data to non-governmental cloud-based systems. Through Cooperative Research and Development Agreements signed in 2015 between NOAA and Amazon Web Services, Google Cloud Platform, IBM, Microsoft Azure, and the Open Commons Consortium, NOAA is distributing open government data to a wide community of potential users. There are a number of significant advantages related to the use of open data on commercial cloud platforms, but through this experiment NOAA is also discovering significant challenges for those stewarding and maintaining NOAA's data resources in support of users in the wider open data ecosystem. Among the challenges that will be discussed are: the need to provide effective interpretation of the data content to enable their use by data scientists from other expert communities; effective maintenance of Collaborators' open data stores through coordinated publication of new data and new versions of older data; the provenance and verification of open data as authentic NOAA-sourced data across multiple management boundaries and analytical tools; and keeping pace with the accelerating expectations of users with regard to improved quality control, data latency, availability, and discoverability. Suggested strategies to address these challenges will also be described.

• Value Co-creation and Co-innovation: Linking Networked Organisations and Customer Communities

  NASA Astrophysics Data System (ADS)

  Romero, David; Molina, Arturo

  Strategic networks such as Collaborative Networked Organisations (CNOs) and Virtual Customer Communities (VCCs) show a high potential as drivers of value co-creation and collaborative innovation in today’s Networking Era. Both look at the network structures as a source of jointly value creation and open innovation through access to new skills, knowledge, markets and technologies by sharing risk and integrating complementary competencies. This collaborative endeavour has proven to be able to enhance the adaptability and flexibility of CNOs and VCCs value creating systems in order to react in response to external drivers such as collaborative (business) opportunities. This paper presents a reference framework for creating interface networks, also known as ‘experience-centric networks’, as enablers for linking networked organisations and customer communities in order to support the establishment of user-driven and collaborative innovation networks.

• Reusable Client-Side JavaScript Modules for Immersive Web-Based Real-Time Collaborative Neuroimage Visualization.

  PubMed

  Bernal-Rusiel, Jorge L; Rannou, Nicolas; Gollub, Randy L; Pieper, Steve; Murphy, Shawn; Robertson, Richard; Grant, Patricia E; Pienaar, Rudolph

  2017-01-01

  In this paper we present a web-based software solution to the problem of implementing real-time collaborative neuroimage visualization. In both clinical and research settings, simple and powerful access to imaging technologies across multiple devices is becoming increasingly useful. Prior technical solutions have used a server-side rendering and push-to-client model wherein only the server has the full image dataset. We propose a rich client solution in which each client has all the data and uses the Google Drive Realtime API for state synchronization. We have developed a small set of reusable client-side object-oriented JavaScript modules that make use of the XTK toolkit, a popular open-source JavaScript library also developed by our team, for the in-browser rendering and visualization of brain image volumes. Efficient realtime communication among the remote instances is achieved by using just a small JSON object, comprising a representation of the XTK image renderers' state, as the Google Drive Realtime collaborative data model. The developed open-source JavaScript modules have already been instantiated in a web-app called MedView , a distributed collaborative neuroimage visualization application that is delivered to the users over the web without requiring the installation of any extra software or browser plugin. This responsive application allows multiple physically distant physicians or researchers to cooperate in real time to reach a diagnosis or scientific conclusion. It also serves as a proof of concept for the capabilities of the presented technological solution.

• Advancing Innovation Through Collaboration: Implementation of the NASA Space Life Sciences Strategy

  NASA Technical Reports Server (NTRS)

  Davis, Jeffrey R.; Richard, Elizabeth E.

  2010-01-01

  On October 18, 2010, the NASA Human Health and Performance center (NHHPC) was opened to enable collaboration among government, academic and industry members. Membership rapidly grew to 90 members (http://nhhpc.nasa.gov ) and members began identifying collaborative projects as detailed in this article. In addition, a first workshop in open collaboration and innovation was conducted on January 19, 2011 by the NHHPC resulting in additional challenges and projects for further development. This first workshop was a result of the SLSD successes in running open innovation challenges over the past two years. In 2008, the NASA Johnson Space Center, Space Life Sciences Directorate (SLSD) began pilot projects in open innovation (crowd sourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical problems. From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external challenges were conducted through three different vendors: InnoCentive, Yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive platform, customized to NASA use, and promoted as NASA@Work. The results from the 34 challenges involved not only technical solutions that were reported previously at the 61st IAC, but also the formation of new collaborative relationships. For example, the TopCoder pilot was expanded by the NASA Space Operations Mission Directorate to the NASA Tournament Lab in collaboration with Harvard Business School and TopCoder. Building on these initial successes, the NHHPC workshop in January of 2011, and ongoing NHHPC member discussions, several important collaborations have been developed: (1) Space Act Agreement between NASA and GE for collaborative projects (2) NASA and academia for a Visual Impairment / Intracranial Hypertension summit (February 2011) (3) NASA and the DoD through the Defense Venture Catalyst Initiative (DeVenCI) for a technical needs workshop (June 2011) (4) NASA and the San Diego Zoo for a joint challenge in biomimicry (5) NASA and the FAA Center of Excellence for Commercial Space Flight for five collaborative projects (6) NASA and ESA for a Space Medicine Workshop (July 2011) (7) NASA and Tufts University for an education pilot (8) Establishment of long-term contracts (August 2011) to enable future challenges (9) Establishment of a new Center of Excellence for Collaborative Innovation (July 2011) for all federal agencies in the US

Open core control software for surgical robots

PubMed Central

Kozuka, Hiroaki; Kim, Hyung Wook; Takesue, Naoyuki; Vladimirov, B.; Sakaguchi, Masamichi; Tokuda, Junichi; Hata, Nobuhiko; Chinzei, Kiyoyuki; Fujimoto, Hideo

2010-01-01

Object In these days, patients and doctors in operation room are surrounded by many medical devices as resulting from recent advancement of medical technology. However, these cutting-edge medical devices are working independently and not collaborating with each other, even though the collaborations between these devices such as navigation systems and medical imaging devices are becoming very important for accomplishing complex surgical tasks (such as a tumor removal procedure while checking the tumor location in neurosurgery). On the other hand, several surgical robots have been commercialized, and are becoming common. However, these surgical robots are not open for collaborations with external medical devices in these days. A cutting-edge “intelligent surgical robot” will be possible in collaborating with surgical robots, various kinds of sensors, navigation system and so on. On the other hand, most of the academic software developments for surgical robots are “home-made” in their research institutions and not open to the public. Therefore, open source control software for surgical robots can be beneficial in this field. From these perspectives, we developed Open Core Control software for surgical robots to overcome these challenges. Materials and methods In general, control softwares have hardware dependencies based on actuators, sensors and various kinds of internal devices. Therefore, these control softwares cannot be used on different types of robots without modifications. However, the structure of the Open Core Control software can be reused for various types of robots by abstracting hardware dependent parts. In addition, network connectivity is crucial for collaboration between advanced medical devices. The OpenIGTLink is adopted in Interface class which plays a role to communicate with external medical devices. At the same time, it is essential to maintain the stable operation within the asynchronous data transactions through network. In the Open Core Control software, several techniques for this purpose were introduced. Virtual fixture is well known technique as a “force guide” for supporting operators to perform precise manipulation by using a master–slave robot. The virtual fixture for precise and safety surgery was implemented on the system to demonstrate an idea of high-level collaboration between a surgical robot and a navigation system. The extension of virtual fixture is not a part of the Open Core Control system, however, the function such as virtual fixture cannot be realized without a tight collaboration between cutting-edge medical devices. By using the virtual fixture, operators can pre-define an accessible area on the navigation system, and the area information can be transferred to the robot. In this manner, the surgical console generates the reflection force when the operator tries to get out from the pre-defined accessible area during surgery. Results The Open Core Control software was implemented on a surgical master–slave robot and stable operation was observed in a motion test. The tip of the surgical robot was displayed on a navigation system by connecting the surgical robot with a 3D position sensor through the OpenIGTLink. The accessible area was pre-defined before the operation, and the virtual fixture was displayed as a “force guide” on the surgical console. In addition, the system showed stable performance in a duration test with network disturbance. Conclusion In this paper, a design of the Open Core Control software for surgical robots and the implementation of virtual fixture were described. The Open Core Control software was implemented on a surgical robot system and showed stable performance in high-level collaboration works. The Open Core Control software is developed to be a widely used platform of surgical robots. Safety issues are essential for control software of these complex medical devices. It is important to follow the global specifications such as a FDA requirement “General Principles of Software Validation” or IEC62304. For following these regulations, it is important to develop a self-test environment. Therefore, a test environment is now under development to test various interference in operation room such as a noise of electric knife by considering safety and test environment regulations such as ISO13849 and IEC60508. The Open Core Control software is currently being developed software in open-source manner and available on the Internet. A communization of software interface is becoming a major trend in this field. Based on this perspective, the Open Core Control software can be expected to bring contributions in this field. PMID:20033506

Radioactive source security: the cultural challenges.

PubMed

Englefield, Chris

2015-04-01

Radioactive source security is an essential part of radiation protection. Sources can be abandoned, lost or stolen. If they are stolen, they could be used to cause deliberate harm and the risks are varied and significant. There is a need for a global security protection system and enhanced capability to achieve this. The establishment of radioactive source security requires 'cultural exchanges'. These exchanges include collaboration between: radiation protection specialists and security specialists; the nuclear industry and users of radioactive sources; training providers and regulators/users. This collaboration will facilitate knowledge and experience exchange for the various stakeholder groups, beyond those already provided. This will promote best practice in both physical and information security and heighten security awareness generally. Only if all groups involved are prepared to open their minds to listen to and learn from, each other will a suitable global level of control be achieved. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

PyPedia: using the wiki paradigm as crowd sourcing environment for bioinformatics protocols.

PubMed

Kanterakis, Alexandros; Kuiper, Joël; Potamias, George; Swertz, Morris A

2015-01-01

Today researchers can choose from many bioinformatics protocols for all types of life sciences research, computational environments and coding languages. Although the majority of these are open source, few of them possess all virtues to maximize reuse and promote reproducible science. Wikipedia has proven a great tool to disseminate information and enhance collaboration between users with varying expertise and background to author qualitative content via crowdsourcing. However, it remains an open question whether the wiki paradigm can be applied to bioinformatics protocols. We piloted PyPedia, a wiki where each article is both implementation and documentation of a bioinformatics computational protocol in the python language. Hyperlinks within the wiki can be used to compose complex workflows and induce reuse. A RESTful API enables code execution outside the wiki. Initial content of PyPedia contains articles for population statistics, bioinformatics format conversions and genotype imputation. Use of the easy to learn wiki syntax effectively lowers the barriers to bring expert programmers and less computer savvy researchers on the same page. PyPedia demonstrates how wiki can provide a collaborative development, sharing and even execution environment for biologists and bioinformaticians that complement existing resources, useful for local and multi-center research teams. PyPedia is available online at: http://www.pypedia.com. The source code and installation instructions are available at: https://github.com/kantale/PyPedia_server. The PyPedia python library is available at: https://github.com/kantale/pypedia. PyPedia is open-source, available under the BSD 2-Clause License.

Workflow4Metabolomics: a collaborative research infrastructure for computational metabolomics

PubMed Central

Giacomoni, Franck; Le Corguillé, Gildas; Monsoor, Misharl; Landi, Marion; Pericard, Pierre; Pétéra, Mélanie; Duperier, Christophe; Tremblay-Franco, Marie; Martin, Jean-François; Jacob, Daniel; Goulitquer, Sophie; Thévenot, Etienne A.; Caron, Christophe

2015-01-01

Summary: The complex, rapidly evolving field of computational metabolomics calls for collaborative infrastructures where the large volume of new algorithms for data pre-processing, statistical analysis and annotation can be readily integrated whatever the language, evaluated on reference datasets and chained to build ad hoc workflows for users. We have developed Workflow4Metabolomics (W4M), the first fully open-source and collaborative online platform for computational metabolomics. W4M is a virtual research environment built upon the Galaxy web-based platform technology. It enables ergonomic integration, exchange and running of individual modules and workflows. Alternatively, the whole W4M framework and computational tools can be downloaded as a virtual machine for local installation. Availability and implementation: http://workflow4metabolomics.org homepage enables users to open a private account and access the infrastructure. W4M is developed and maintained by the French Bioinformatics Institute (IFB) and the French Metabolomics and Fluxomics Infrastructure (MetaboHUB). Contact: contact@workflow4metabolomics.org PMID:25527831

Workflow4Metabolomics: a collaborative research infrastructure for computational metabolomics.

PubMed

Giacomoni, Franck; Le Corguillé, Gildas; Monsoor, Misharl; Landi, Marion; Pericard, Pierre; Pétéra, Mélanie; Duperier, Christophe; Tremblay-Franco, Marie; Martin, Jean-François; Jacob, Daniel; Goulitquer, Sophie; Thévenot, Etienne A; Caron, Christophe

2015-05-01

The complex, rapidly evolving field of computational metabolomics calls for collaborative infrastructures where the large volume of new algorithms for data pre-processing, statistical analysis and annotation can be readily integrated whatever the language, evaluated on reference datasets and chained to build ad hoc workflows for users. We have developed Workflow4Metabolomics (W4M), the first fully open-source and collaborative online platform for computational metabolomics. W4M is a virtual research environment built upon the Galaxy web-based platform technology. It enables ergonomic integration, exchange and running of individual modules and workflows. Alternatively, the whole W4M framework and computational tools can be downloaded as a virtual machine for local installation. http://workflow4metabolomics.org homepage enables users to open a private account and access the infrastructure. W4M is developed and maintained by the French Bioinformatics Institute (IFB) and the French Metabolomics and Fluxomics Infrastructure (MetaboHUB). contact@workflow4metabolomics.org. © The Author 2014. Published by Oxford University Press.

Technical note: The Linked Paleo Data framework - a common tongue for paleoclimatology

NASA Astrophysics Data System (ADS)

McKay, Nicholas P.; Emile-Geay, Julien

2016-04-01

Paleoclimatology is a highly collaborative scientific endeavor, increasingly reliant on online databases for data sharing. Yet there is currently no universal way to describe, store and share paleoclimate data: in other words, no standard. Data standards are often regarded by scientists as mere technicalities, though they underlie much scientific and technological innovation, as well as facilitating collaborations between research groups. In this article, we propose a preliminary data standard for paleoclimate data, general enough to accommodate all the archive and measurement types encountered in a large international collaboration (PAGES 2k). We also introduce a vehicle for such structured data (Linked Paleo Data, or LiPD), leveraging recent advances in knowledge representation (Linked Open Data).The LiPD framework enables quick querying and extraction, and we expect that it will facilitate the writing of open-source community codes to access, analyze, model and visualize paleoclimate observations. We welcome community feedback on this standard, and encourage paleoclimatologists to experiment with the format for their own purposes.

KNMI DataLab experiences in serving data-driven innovations

NASA Astrophysics Data System (ADS)

Noteboom, Jan Willem; Sluiter, Raymond

2016-04-01

Climate change research and innovations in weather forecasting rely more and more on (Big) data. Besides increasing data from traditional sources (such as observation networks, radars and satellites), the use of open data, crowd sourced data and the Internet of Things (IoT) is emerging. To deploy these sources of data optimally in our services and products, KNMI has established a DataLab to serve data-driven innovations in collaboration with public and private sector partners. Big data management, data integration, data analytics including machine learning and data visualization techniques are playing an important role in the DataLab. Cross-domain data-driven innovations that arise from public-private collaborative projects and research programmes can be explored, experimented and/or piloted by the KNMI DataLab. Furthermore, advice can be requested on (Big) data techniques and data sources. In support of collaborative (Big) data science activities, scalable environments are offered with facilities for data integration, data analysis and visualization. In addition, Data Science expertise is provided directly or from a pool of internal and external experts. At the EGU conference, gained experiences and best practices are presented in operating the KNMI DataLab to serve data-driven innovations for weather and climate applications optimally.

Open Data and Open Science for better Research in the Geo and Space Domain

NASA Astrophysics Data System (ADS)

Ritschel, B.; Seelus, C.; Neher, G.; Iyemori, T.; Koyama, Y.; Yatagai, A. I.; Murayama, Y.; King, T. A.; Hughes, S.; Fung, S. F.; Galkin, I. A.; Hapgood, M. A.; Belehaki, A.

2015-12-01

Main open data principles had been worked out in the run-up and finally adopted in the Open Data Charta at the G8 summit in Lough Erne, Northern Ireland in June 2013. Important principles are also valid for science data, such as Open Data by Default, Quality and Quantity, Useable by All, Releasing Data for Improved Governance, Releasing Data for Innovation. There is also an explicit relationship to such areas of high values as earth observation, education and geospatial data. The European union implementation plan of the Open Data Charta identifies among other things objectives such as making data available in an open format, enabling semantic interoperability, ensuring quality, documentation and where appropriate reconciliation across different data sources, implementing software solutionsallowing easy management, publication or visualization of datasets and simplifying clearance of intellectual property rights.Open Science is not just a list of already for a longer time known principles but stands for a lot of initiatives and projects around a better handling of scientific data and openly shared scientific knowledge. It is also about transparency in methodology and collection of data, availability and reuse of scientific data, public accessibility to scientific communication and using of social media to facility scientific collaboration. Some projects are concentrating on open sharing of free and open source software and even further hardware in kind of processing capabilities. In addition question about the mashup of data and publication and an open peer review process are addressed.Following the principles of open data and open science the newest results of the collaboration efforts in mashing up the data servers related to the Japanese IUGONET, the European Union ESPAS and the GFZ ISDC semantic Web projects will be presented here. The semantic Web based approach for the mashup is focusing on the design and implementation of a common but still distributed data catalog based on semantical interoperability including the transparent access to data in relational data bases. References: https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/207772/Open_Data_Charter.pdfhttp://www.openscience.org/blog/wp-content/uploads/2013/06/OpenSciencePoster.pdf

Adaptive and Collaborative Exploitation of 3 Dimensional Environmental Acoustics in Distributed Undersea Networks

DTIC Science & Technology

2015-09-30

experiment was conducted in Broad Sound of Massachusetts Bay using the AUV Unicorn, a 147dB omnidirectional Lubell source, and an open-ended steel pipe... steel pipe target (Figure C) was dropped at an approximate local coordinate position of (x,y)=(170,155). The location was estimated using ship...position when the target was dropped, but was only accurate within 10-15m. The orientation of the target was unknown. Figure C: Open-ended steel

Orchestrating high-throughput genomic analysis with Bioconductor

PubMed Central

Huber, Wolfgang; Carey, Vincent J.; Gentleman, Robert; Anders, Simon; Carlson, Marc; Carvalho, Benilton S.; Bravo, Hector Corrada; Davis, Sean; Gatto, Laurent; Girke, Thomas; Gottardo, Raphael; Hahne, Florian; Hansen, Kasper D.; Irizarry, Rafael A.; Lawrence, Michael; Love, Michael I.; MacDonald, James; Obenchain, Valerie; Oleś, Andrzej K.; Pagès, Hervé; Reyes, Alejandro; Shannon, Paul; Smyth, Gordon K.; Tenenbaum, Dan; Waldron, Levi; Morgan, Martin

2015-01-01

Bioconductor is an open-source, open-development software project for the analysis and comprehension of high-throughput data in genomics and molecular biology. The project aims to enable interdisciplinary research, collaboration and rapid development of scientific software. Based on the statistical programming language R, Bioconductor comprises 934 interoperable packages contributed by a large, diverse community of scientists. Packages cover a range of bioinformatic and statistical applications. They undergo formal initial review and continuous automated testing. We present an overview for prospective users and contributors. PMID:25633503

An Evolving Worldview: Making Open Source Easy

NASA Astrophysics Data System (ADS)

Rice, Z.

2017-12-01

NASA Worldview is an interactive interface for browsing full-resolution, global satellite imagery. Worldview supports an open data policy so that academia, private industries and the general public can use NASA's satellite data to address Earth science related issues. Worldview was open sourced in 2014. By shifting to an open source approach, the Worldview application has evolved to better serve end-users. Project developers are able to have discussions with end-users and community developers to understand issues and develop new features. Community developers are able to track upcoming features, collaborate on them and make their own contributions. Developers who discover issues are able to address those issues and submit a fix. This reduces the time it takes for a project developer to reproduce an issue or develop a new feature. Getting new developers to contribute to the project has been one of the most important and difficult aspects of open sourcing Worldview. After witnessing potential outside contributors struggle, a focus has been made on making the installation of Worldview simple to reduce the initial learning curve and make contributing code easy. One way we have addressed this is through a simplified setup process. Our setup documentation includes a set of prerequisites and a set of straightforward commands to clone, configure, install and run. This presentation will emphasize our focus to simplify and standardize Worldview's open source code so that more people are able to contribute. The more people who contribute, the better the application will become over time.

Advancements in Open Geospatial Standards for Photogrammetry and Remote Sensing from Ogc

NASA Astrophysics Data System (ADS)

Percivall, George; Simonis, Ingo

2016-06-01

The necessity of open standards for effective sharing and use of remote sensing continues to receive increasing emphasis in policies of agencies and projects around the world. Coordination on the development of open standards for geospatial information is a vital step to insure that the technical standards are ready to support the policy objectives. The mission of the Open Geospatial Consortium (OGC) is to advance development and use of international standards and supporting services that promote geospatial interoperability. To accomplish this mission, OGC serves as the global forum for the collaboration of geospatial data / solution providers and users. Photogrammetry and remote sensing are sources of the largest and most complex geospatial information. Some of the most mature OGC standards for remote sensing include the Sensor Web Enablement (SWE) standards, the Web Coverage Service (WCS) suite of standards, encodings such as NetCDF, GMLJP2 and GeoPackage, and the soon to be approved Discrete Global Grid Systems (DGGS) standard. In collaboration with ISPRS, OGC working with government, research and industrial organizations continue to advance the state of geospatial standards for full use of photogrammetry and remote sensing.

Open Ephys electroencephalography (Open Ephys  +  EEG): a modular, low-cost, open-source solution to human neural recording

NASA Astrophysics Data System (ADS)

Black, Christopher; Voigts, Jakob; Agrawal, Uday; Ladow, Max; Santoyo, Juan; Moore, Christopher; Jones, Stephanie

2017-06-01

Objective. Electroencephalography (EEG) offers a unique opportunity to study human neural activity non-invasively with millisecond resolution using minimal equipment in or outside of a lab setting. EEG can be combined with a number of techniques for closed-loop experiments, where external devices are driven by specific neural signals. However, reliable, commercially available EEG systems are expensive, often making them impractical for individual use and research development. Moreover, by design, a majority of these systems cannot be easily altered to the specification needed by the end user. We focused on mitigating these issues by implementing open-source tools to develop a new EEG platform to drive down research costs and promote collaboration and innovation. Approach. Here, we present methods to expand the open-source electrophysiology system, Open Ephys (www.openephys.org), to include human EEG recordings. We describe the equipment and protocol necessary to interface various EEG caps with the Open Ephys acquisition board, and detail methods for processing data. We present applications of Open Ephys  +  EEG as a research tool and discuss how this innovative EEG technology lays a framework for improved closed-loop paradigms and novel brain-computer interface experiments. Main results. The Open Ephys  +  EEG system can record reliable human EEG data, as well as human EMG data. A side-by-side comparison of eyes closed 8-14 Hz activity between the Open Ephys  +  EEG system and the Brainvision ActiCHamp EEG system showed similar average power and signal to noise. Significance. Open Ephys  +  EEG enables users to acquire high-quality human EEG data comparable to that of commercially available systems, while maintaining the price point and extensibility inherent to open-source systems.

Open Ephys electroencephalography (Open Ephys  +  EEG): a modular, low-cost, open-source solution to human neural recording.

PubMed

Black, Christopher; Voigts, Jakob; Agrawal, Uday; Ladow, Max; Santoyo, Juan; Moore, Christopher; Jones, Stephanie

2017-06-01

Electroencephalography (EEG) offers a unique opportunity to study human neural activity non-invasively with millisecond resolution using minimal equipment in or outside of a lab setting. EEG can be combined with a number of techniques for closed-loop experiments, where external devices are driven by specific neural signals. However, reliable, commercially available EEG systems are expensive, often making them impractical for individual use and research development. Moreover, by design, a majority of these systems cannot be easily altered to the specification needed by the end user. We focused on mitigating these issues by implementing open-source tools to develop a new EEG platform to drive down research costs and promote collaboration and innovation. Here, we present methods to expand the open-source electrophysiology system, Open Ephys (www.openephys.org), to include human EEG recordings. We describe the equipment and protocol necessary to interface various EEG caps with the Open Ephys acquisition board, and detail methods for processing data. We present applications of Open Ephys  +  EEG as a research tool and discuss how this innovative EEG technology lays a framework for improved closed-loop paradigms and novel brain-computer interface experiments. The Open Ephys  +  EEG system can record reliable human EEG data, as well as human EMG data. A side-by-side comparison of eyes closed 8-14 Hz activity between the Open Ephys  +  EEG system and the Brainvision ActiCHamp EEG system showed similar average power and signal to noise. Open Ephys  +  EEG enables users to acquire high-quality human EEG data comparable to that of commercially available systems, while maintaining the price point and extensibility inherent to open-source systems.

Global Health Innovation Technology Models.

PubMed

Harding, Kimberly

2016-01-01

Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC) research collaborators directly prevent the growth of sustainable Global Health innovation for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utilizing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to accelerate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

Global Health Innovation Technology Models

PubMed Central

Harding, Kimberly

2016-01-01

Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC) research collaborators directly prevent the growth of sustainable Global Health innovation for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utilizing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to accelerate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

WebProtégé: a collaborative Web-based platform for editing biomedical ontologies.

PubMed

Horridge, Matthew; Tudorache, Tania; Nuylas, Csongor; Vendetti, Jennifer; Noy, Natalya F; Musen, Mark A

2014-08-15

WebProtégé is an open-source Web application for editing OWL 2 ontologies. It contains several features to aid collaboration, including support for the discussion of issues, change notification and revision-based change tracking. WebProtégé also features a simple user interface, which is geared towards editing the kinds of class descriptions and annotations that are prevalent throughout biomedical ontologies. Moreover, it is possible to configure the user interface using views that are optimized for editing Open Biomedical Ontology (OBO) class descriptions and metadata. Some of these views are shown in the Supplementary Material and can be seen in WebProtégé itself by configuring the project as an OBO project. WebProtégé is freely available for use on the Web at http://webprotege.stanford.edu. It is implemented in Java and JavaScript using the OWL API and the Google Web Toolkit. All major browsers are supported. For users who do not wish to host their ontologies on the Stanford servers, WebProtégé is available as a Web app that can be run locally using a Servlet container such as Tomcat. Binaries, source code and documentation are available under an open-source license at http://protegewiki.stanford.edu/wiki/WebProtege. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

EO/IR scene generation open source initiative for real-time hardware-in-the-loop and all-digital simulation

NASA Astrophysics Data System (ADS)

Morris, Joseph W.; Lowry, Mac; Boren, Brett; Towers, James B.; Trimble, Darian E.; Bunfield, Dennis H.

2011-06-01

The US Army Aviation and Missile Research, Development and Engineering Center (AMRDEC) and the Redstone Test Center (RTC) has formed the Scene Generation Development Center (SGDC) to support the Department of Defense (DoD) open source EO/IR Scene Generation initiative for real-time hardware-in-the-loop and all-digital simulation. Various branches of the DoD have invested significant resources in the development of advanced scene and target signature generation codes. The SGDC goal is to maintain unlimited government rights and controlled access to government open source scene generation and signature codes. In addition, the SGDC provides development support to a multi-service community of test and evaluation (T&E) users, developers, and integrators in a collaborative environment. The SGDC has leveraged the DoD Defense Information Systems Agency (DISA) ProjectForge (https://Project.Forge.mil) which provides a collaborative development and distribution environment for the DoD community. The SGDC will develop and maintain several codes for tactical and strategic simulation, such as the Joint Signature Image Generator (JSIG), the Multi-spectral Advanced Volumetric Real-time Imaging Compositor (MAVRIC), and Office of the Secretary of Defense (OSD) Test and Evaluation Science and Technology (T&E/S&T) thermal modeling and atmospherics packages, such as EOView, CHARM, and STAR. Other utility packages included are the ContinuumCore for real-time messaging and data management and IGStudio for run-time visualization and scenario generation.

Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges.

PubMed

Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

2016-02-06

The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well.

Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges

PubMed Central

Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

2016-01-01

The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well. PMID:26861345

Biogem: an effective tool-based approach for scaling up open source software development in bioinformatics.

PubMed

Bonnal, Raoul J P; Aerts, Jan; Githinji, George; Goto, Naohisa; MacLean, Dan; Miller, Chase A; Mishima, Hiroyuki; Pagani, Massimiliano; Ramirez-Gonzalez, Ricardo; Smant, Geert; Strozzi, Francesco; Syme, Rob; Vos, Rutger; Wennblom, Trevor J; Woodcroft, Ben J; Katayama, Toshiaki; Prins, Pjotr

2012-04-01

Biogem provides a software development environment for the Ruby programming language, which encourages community-based software development for bioinformatics while lowering the barrier to entry and encouraging best practices. Biogem, with its targeted modular and decentralized approach, software generator, tools and tight web integration, is an improved general model for scaling up collaborative open source software development in bioinformatics. Biogem and modules are free and are OSS. Biogem runs on all systems that support recent versions of Ruby, including Linux, Mac OS X and Windows. Further information at http://www.biogems.info. A tutorial is available at http://www.biogems.info/howto.html bonnal@ingm.org.

Open Source Cloud-Based Technologies for Bim

NASA Astrophysics Data System (ADS)

Logothetis, S.; Karachaliou, E.; Valari, E.; Stylianidis, E.

2018-05-01

This paper presents a Cloud-based open source system for storing and processing data from a 3D survey approach. More specifically, we provide an online service for viewing, storing and analysing BIM. Cloud technologies were used to develop a web interface as a BIM data centre, which can handle large BIM data using a server. The server can be accessed by many users through various electronic devices anytime and anywhere so they can view online 3D models using browsers. Nowadays, the Cloud computing is engaged progressively in facilitating BIM-based collaboration between the multiple stakeholders and disciplinary groups for complicated Architectural, Engineering and Construction (AEC) projects. Besides, the development of Open Source Software (OSS) has been rapidly growing and their use tends to be united. Although BIM and Cloud technologies are extensively known and used, there is a lack of integrated open source Cloud-based platforms able to support all stages of BIM processes. The present research aims to create an open source Cloud-based BIM system that is able to handle geospatial data. In this effort, only open source tools will be used; from the starting point of creating the 3D model with FreeCAD to its online presentation through BIMserver. Python plug-ins will be developed to link the two software which will be distributed and freely available to a large community of professional for their use. The research work will be completed by benchmarking four Cloud-based BIM systems: Autodesk BIM 360, BIMserver, Graphisoft BIMcloud and Onuma System, which present remarkable results.

The Open Source Movement, Publishing, and the Dissemination of Knowledge.

ERIC Educational Resources Information Center

Young, Bob

A series of changes in intellectual property law over the last 30 years has made it more difficult for researchers, scientists, authors, and artists to cooperate and collaborate on critically important projects. At the same time, the advance of communications technologies, specifically the Internet, promises to foster an explosion in creativity,…

Improving Writing with Wiki Discussion Forums

ERIC Educational Resources Information Center

Corrigan, John

2010-01-01

Wikis are open-source sites, meaning that users may add, remove, or edit most content quickly. Because they are a public venue, students became more engaged and invested in what they wrote, wrote more frequently, edited their work more carefully, collaborated, and became accustomed to frequent peer and adult feedback. Writing practice and in-depth…

Visualization and Analysis of Arena Data, Wound Ballistics Data, and Vulnerability/Lethality (V/L) Data

DTIC Science & Technology

2012-02-01

engineering simulation in mind. In fact, it was originally developed for Walt Disney . This engine was made open source in 2002 in order to collaborate... Disney VR studios and is still used in Disney Imagineering [5]. There are many similarities in overall design between PANDA and Prospect; however

Transparent Global Seismic Hazard and Risk Assessment

NASA Astrophysics Data System (ADS)

Smolka, Anselm; Schneider, John; Pinho, Rui; Crowley, Helen

2013-04-01

Vulnerability to earthquakes is increasing, yet advanced reliable risk assessment tools and data are inaccessible to most, despite being a critical basis for managing risk. Also, there are few, if any, global standards that allow us to compare risk between various locations. The Global Earthquake Model (GEM) is a unique collaborative effort that aims to provide organizations and individuals with tools and resources for transparent assessment of earthquake risk anywhere in the world. By pooling data, knowledge and people, GEM acts as an international forum for collaboration and exchange, and leverages the knowledge of leading experts for the benefit of society. Sharing of data and risk information, best practices, and approaches across the globe is key to assessing risk more effectively. Through global projects, open-source IT development and collaborations with more than 10 regions, leading experts are collaboratively developing unique global datasets, best practice, open tools and models for seismic hazard and risk assessment. Guided by the needs and experiences of governments, companies and citizens at large, they work in continuous interaction with the wider community. A continuously expanding public-private partnership constitutes the GEM Foundation, which drives the collaborative GEM effort. An integrated and holistic approach to risk is key to GEM's risk assessment platform, OpenQuake, that integrates all above-mentioned contributions and will become available towards the end of 2014. Stakeholders worldwide will be able to calculate, visualise and investigate earthquake risk, capture new data and to share their findings for joint learning. Homogenized information on hazard can be combined with data on exposure (buildings, population) and data on their vulnerability, for loss assessment around the globe. Furthermore, for a true integrated view of seismic risk, users can add social vulnerability and resilience indices to maps and estimate the costs and benefits of different risk management measures. The following global data, models and methodologies will be available in the platform. Some of these will be released to the public already before, such as the ISC-GEM global instrumental catalogue (released January 2013). Datasets: • Global Earthquake History Catalogue [1000-1903] • Global Instrumental Catalogue [1900-2009] • Global Geodetic Strain Rate Model • Global Active Fault Database • Tectonic Regionalisation • Buildings and Population Database • Earthquake Consequences Database • Physical Vulnerability Database • Socio-Economic Vulnerability and Resilience Indicators Models: • Seismic Source Models • Ground Motion (Attenuation) Models • Physical Exposure Models • Physical Vulnerability Models • Composite Index Models (social vulnerability, resilience, indirect loss) The aforementioned models developed under the GEM framework will be combined to produce estimates of hazard and risk at a global scale. Furthermore, building on many ongoing efforts and knowledge of scientists worldwide, GEM will integrate state-of-the-art data, models, results and open-source tools into a single platform that is to serve as a "clearinghouse" on seismic risk. The platform will continue to increase in value, in particular for use in local contexts, through contributions and collaborations with scientists and organisations worldwide.

Cheminformatics and the Semantic Web: adding value with linked data and enhanced provenance

PubMed Central

Frey, Jeremy G; Bird, Colin L

2013-01-01

Cheminformatics is evolving from being a field of study associated primarily with drug discovery into a discipline that embraces the distribution, management, access, and sharing of chemical data. The relationship with the related subject of bioinformatics is becoming stronger and better defined, owing to the influence of Semantic Web technologies, which enable researchers to integrate heterogeneous sources of chemical, biochemical, biological, and medical information. These developments depend on a range of factors: the principles of chemical identifiers and their role in relationships between chemical and biological entities; the importance of preserving provenance and properly curated metadata; and an understanding of the contribution that the Semantic Web can make at all stages of the research lifecycle. The movements toward open access, open source, and open collaboration all contribute to progress toward the goals of integration. PMID:24432050

Problem formulation, metrics, open government, and on-line collaboration

NASA Astrophysics Data System (ADS)

Ziegler, C. R.; Schofield, K.; Young, S.; Shaw, D.

2010-12-01

Problem formulation leading to effective environmental management, including synthesis and application of science by government agencies, may benefit from collaborative on-line environments. This is illustrated by two interconnected projects: 1) literature-based evidence tools that support causal assessment and problem formulation, and 2) development of output, outcome, and sustainability metrics for tracking environmental conditions. Specifically, peer-production mechanisms allow for global contribution to science-based causal evidence databases, and subsequent crowd-sourced development of causal networks supported by that evidence. In turn, science-based causal networks may inform problem formulation and selection of metrics or indicators to track environmental condition (or problem status). Selecting and developing metrics in a collaborative on-line environment may improve stakeholder buy-in, the explicit relevance of metrics to planning, and the ability to approach problem apportionment or accountability, and to define success or sustainability. Challenges include contribution governance, data-sharing incentives, linking on-line interfaces to data service providers, and the intersection of environmental science and social science. Degree of framework access and confidentiality may vary by group and/or individual, but may ultimately be geared at demonstrating connections between science and decision making and supporting a culture of open government, by fostering transparency, public engagement, and collaboration.

BioMart: a data federation framework for large collaborative projects.

PubMed

Zhang, Junjun; Haider, Syed; Baran, Joachim; Cros, Anthony; Guberman, Jonathan M; Hsu, Jack; Liang, Yong; Yao, Long; Kasprzyk, Arek

2011-01-01

BioMart is a freely available, open source, federated database system that provides a unified access to disparate, geographically distributed data sources. It is designed to be data agnostic and platform independent, such that existing databases can easily be incorporated into the BioMart framework. BioMart allows databases hosted on different servers to be presented seamlessly to users, facilitating collaborative projects between different research groups. BioMart contains several levels of query optimization to efficiently manage large data sets and offers a diverse selection of graphical user interfaces and application programming interfaces to ensure that queries can be performed in whatever manner is most convenient for the user. The software has now been adopted by a large number of different biological databases spanning a wide range of data types and providing a rich source of annotation available to bioinformaticians and biologists alike.

Open Biomedical Engineering education in Africa.

PubMed

Ahluwalia, Arti; Atwine, Daniel; De Maria, Carmelo; Ibingira, Charles; Kipkorir, Emmauel; Kiros, Fasil; Madete, June; Mazzei, Daniele; Molyneux, Elisabeth; Moonga, Kando; Moshi, Mainen; Nzomo, Martin; Oduol, Vitalice; Okuonzi, John

2015-08-01

Despite the virtual revolution, the mainstream academic community in most countries remains largely ignorant of the potential of web-based teaching resources and of the expansion of open source software, hardware and rapid prototyping. In the context of Biomedical Engineering (BME), where human safety and wellbeing is paramount, a high level of supervision and quality control is required before open source concepts can be embraced by universities and integrated into the curriculum. In the meantime, students, more than their teachers, have become attuned to continuous streams of digital information, and teaching methods need to adapt rapidly by giving them the skills to filter meaningful information and by supporting collaboration and co-construction of knowledge using open, cloud and crowd based technology. In this paper we present our experience in bringing these concepts to university education in Africa, as a way of enabling rapid development and self-sufficiency in health care. We describe the three summer schools held in sub-Saharan Africa where both students and teachers embraced the philosophy of open BME education with enthusiasm, and discuss the advantages and disadvantages of opening education in this way in the developing and developed world.

Virtualization of open-source secure web services to support data exchange in a pediatric critical care research network.

PubMed

Frey, Lewis J; Sward, Katherine A; Newth, Christopher J L; Khemani, Robinder G; Cryer, Martin E; Thelen, Julie L; Enriquez, Rene; Shaoyu, Su; Pollack, Murray M; Harrison, Rick E; Meert, Kathleen L; Berg, Robert A; Wessel, David L; Shanley, Thomas P; Dalton, Heidi; Carcillo, Joseph; Jenkins, Tammara L; Dean, J Michael

2015-11-01

To examine the feasibility of deploying a virtual web service for sharing data within a research network, and to evaluate the impact on data consistency and quality. Virtual machines (VMs) encapsulated an open-source, semantically and syntactically interoperable secure web service infrastructure along with a shadow database. The VMs were deployed to 8 Collaborative Pediatric Critical Care Research Network Clinical Centers. Virtual web services could be deployed in hours. The interoperability of the web services reduced format misalignment from 56% to 1% and demonstrated that 99% of the data consistently transferred using the data dictionary and 1% needed human curation. Use of virtualized open-source secure web service technology could enable direct electronic abstraction of data from hospital databases for research purposes. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

SimVascular: An Open Source Pipeline for Cardiovascular Simulation.

PubMed

Updegrove, Adam; Wilson, Nathan M; Merkow, Jameson; Lan, Hongzhi; Marsden, Alison L; Shadden, Shawn C

2017-03-01

Patient-specific cardiovascular simulation has become a paradigm in cardiovascular research and is emerging as a powerful tool in basic, translational and clinical research. In this paper we discuss the recent development of a fully open-source SimVascular software package, which provides a complete pipeline from medical image data segmentation to patient-specific blood flow simulation and analysis. This package serves as a research tool for cardiovascular modeling and simulation, and has contributed to numerous advances in personalized medicine, surgical planning and medical device design. The SimVascular software has recently been refactored and expanded to enhance functionality, usability, efficiency and accuracy of image-based patient-specific modeling tools. Moreover, SimVascular previously required several licensed components that hindered new user adoption and code management and our recent developments have replaced these commercial components to create a fully open source pipeline. These developments foster advances in cardiovascular modeling research, increased collaboration, standardization of methods, and a growing developer community.

Reusable Client-Side JavaScript Modules for Immersive Web-Based Real-Time Collaborative Neuroimage Visualization

PubMed Central

Bernal-Rusiel, Jorge L.; Rannou, Nicolas; Gollub, Randy L.; Pieper, Steve; Murphy, Shawn; Robertson, Richard; Grant, Patricia E.; Pienaar, Rudolph

2017-01-01

In this paper we present a web-based software solution to the problem of implementing real-time collaborative neuroimage visualization. In both clinical and research settings, simple and powerful access to imaging technologies across multiple devices is becoming increasingly useful. Prior technical solutions have used a server-side rendering and push-to-client model wherein only the server has the full image dataset. We propose a rich client solution in which each client has all the data and uses the Google Drive Realtime API for state synchronization. We have developed a small set of reusable client-side object-oriented JavaScript modules that make use of the XTK toolkit, a popular open-source JavaScript library also developed by our team, for the in-browser rendering and visualization of brain image volumes. Efficient realtime communication among the remote instances is achieved by using just a small JSON object, comprising a representation of the XTK image renderers' state, as the Google Drive Realtime collaborative data model. The developed open-source JavaScript modules have already been instantiated in a web-app called MedView, a distributed collaborative neuroimage visualization application that is delivered to the users over the web without requiring the installation of any extra software or browser plugin. This responsive application allows multiple physically distant physicians or researchers to cooperate in real time to reach a diagnosis or scientific conclusion. It also serves as a proof of concept for the capabilities of the presented technological solution. PMID:28507515

Modular Integrated Stackable Layers (MISL) 1.1 Design Specification. Design Guideline Document

NASA Technical Reports Server (NTRS)

Yim, Hester J.

2012-01-01

This document establishes the design guideline of the Modular Instrumentation Data Acquisition (MI-DAQ) system in utilization of several designs available in EV. The MI- DAQ provides the options to the customers depending on their system requirements i.e. a 28V interface power supply, a low power battery operated system, a low power microcontroller, a higher performance microcontroller, a USB interface, a Ethernet interface, a wireless communication, various sensor interfaces, etc. Depending on customer's requirements, the each functional board can be stacked up from a bottom level of power supply to a higher level of stack to provide user interfaces. The stack up of boards are accomplished by a predefined and standardized power bus and data bus connections which are included in this document along with other physical and electrical guidelines. This guideline also provides information for a new design options. This specification is the product of a collaboration between NASA/JSC/EV and Texas A&M University. The goal of the collaboration is to open source the specification and allow outside entities to design, build, and market modules that are compatible with the specification. NASA has designed and is using numerous modules that are compatible to this specification. A limited number of these modules will also be released as open source designs to support the collaboration. The released designs are listed in the Applicable Documents.

SQL is Dead; Long-live SQL: Relational Database Technology in Science Contexts

NASA Astrophysics Data System (ADS)

Howe, B.; Halperin, D.

2014-12-01

Relational databases are often perceived as a poor fit in science contexts: Rigid schemas, poor support for complex analytics, unpredictable performance, significant maintenance and tuning requirements --- these idiosyncrasies often make databases unattractive in science contexts characterized by heterogeneous data sources, complex analysis tasks, rapidly changing requirements, and limited IT budgets. In this talk, I'll argue that although the value proposition of typical relational database systems are weak in science, the core ideas that power relational databases have become incredibly prolific in open source science software, and are emerging as a universal abstraction for both big data and small data. In addition, I'll talk about two open source systems we are building to "jailbreak" the core technology of relational databases and adapt them for use in science. The first is SQLShare, a Database-as-a-Service system supporting collaborative data analysis and exchange by reducing database use to an Upload-Query-Share workflow with no installation, schema design, or configuration required. The second is Myria, a service that supports much larger scale data, complex analytics, and supports multiple back end systems. Finally, I'll describe some of the ways our collaborators in oceanography, astronomy, biology, fisheries science, and more are using these systems to replace script-based workflows for reasons of performance, flexibility, and convenience.

The Confluence of GIS, Cloud and Open Source, Enabling Big Raster Data Applications

NASA Astrophysics Data System (ADS)

Plesea, L.; Emmart, C. B.; Boller, R. A.; Becker, P.; Baynes, K.

2016-12-01

The rapid evolution of available cloud services is profoundly changing the way applications are being developed and used. Massive object stores, service scalability, continuous integration are some of the most important cloud technology advances that directly influence science applications and GIS. At the same time, more and more scientists are using GIS platforms in their day to day research. Yet with new opportunities there are always some challenges. Given the large amount of data commonly required in science applications, usually large raster datasets, connectivity is one of the biggest problems. Connectivity has two aspects, one being the limited bandwidth and latency of the communication link due to the geographical location of the resources, the other one being the interoperability and intrinsic efficiency of the interface protocol used to connect. NASA and Esri are actively helping each other and collaborating on a few open source projects, aiming to provide some of the core technology components to directly address the GIS enabled data connectivity problems. Last year Esri contributed LERC, a very fast and efficient compression algorithm to the GDAL/MRF format, which itself is a NASA/Esri collaboration project. The MRF raster format has some cloud aware features that make it possible to build high performance web services on cloud platforms, as some of the Esri projects demonstrate. Currently, another NASA open source project, the high performance OnEarth WMTS server is being refactored and enhanced to better integrate with MRF, GDAL and Esri software. Taken together, the GDAL, MRF and OnEarth form the core of an open source CloudGIS toolkit that is already showing results. Since it is well integrated with GDAL, which is the most common interoperability component of GIS applications, this approach should improve the connectivity and performance of many science and GIS applications in the cloud.

A Web Portal-Based Time-Aware KML Animation Tool for Exploring Spatiotemporal Dynamics of Hydrological Events

NASA Astrophysics Data System (ADS)

Bao, X.; Cai, X.; Liu, Y.

2009-12-01

Understanding spatiotemporal dynamics of hydrological events such as storms and droughts is highly valuable for decision making on disaster mitigation and recovery. Virtual Globe-based technologies such as Google Earth and Open Geospatial Consortium KML standards show great promises for collaborative exploration of such events using visual analytical approaches. However, currently there are two barriers for wider usage of such approaches. First, there lacks an easy way to use open source tools to convert legacy or existing data formats such as shapefiles, geotiff, or web services-based data sources to KML and to produce time-aware KML files. Second, an integrated web portal-based time-aware animation tool is currently not available. Thus users usually share their files in the portal but have no means to visually explore them without leaving the portal environment which the users are familiar with. We develop a web portal-based time-aware KML animation tool for viewing extreme hydrologic events. The tool is based on Google Earth JavaScript API and Java Portlet standard 2.0 JSR-286, and it is currently deployable in one of the most popular open source portal frameworks, namely Liferay. We have also developed an open source toolkit kml-soc-ncsa (http://code.google.com/p/kml-soc-ncsa/) to facilitate the conversion of multiple formats into KML and the creation of time-aware KML files. We illustrate our tool using some example cases, in which drought and storm events with both time and space dimension can be explored in this web-based KML animation portlet. The tool provides an easy-to-use web browser-based portal environment for multiple users to collaboratively share and explore their time-aware KML files as well as improving the understanding of the spatiotemporal dynamics of the hydrological events.

Free and Open Source Software for Geospatial in the field of planetary science

NASA Astrophysics Data System (ADS)

Frigeri, A.

2012-12-01

Information technology applied to geospatial analyses has spread quickly in the last ten years. The availability of OpenData and data from collaborative mapping projects increased the interest on tools, procedures and methods to handle spatially-related information. Free Open Source Software projects devoted to geospatial data handling are gaining a good success as the use of interoperable formats and protocols allow the user to choose what pipeline of tools and libraries is needed to solve a particular task, adapting the software scene to his specific problem. In particular, the Free Open Source model of development mimics the scientific method very well, and researchers should be naturally encouraged to take part to the development process of these software projects, as this represent a very agile way to interact among several institutions. When it comes to planetary sciences, geospatial Free Open Source Software is gaining a key role in projects that commonly involve different subjects in an international scenario. Very popular software suites for processing scientific mission data (for example, ISIS) and for navigation/planning (SPICE) are being distributed along with the source code and the interaction between user and developer is often very strict, creating a continuum between these two figures. A very widely spread library for handling geospatial data (GDAL) has started to support planetary data from the Planetary Data System, and recent contributions enabled the support to other popular data formats used in planetary science, as the Vicar one. The use of Geographic Information System in planetary science is now diffused, and Free Open Source GIS, open GIS formats and network protocols allow to extend existing tools and methods developed to solve Earth based problems, also to the case of the study of solar system bodies. A day in the working life of a researcher using Free Open Source Software for geospatial will be presented, as well as benefits and solutions to possible detriments coming from the effort required by using, supporting and contributing.

SensorWeb Hub infrastructure for open access to scientific research data

NASA Astrophysics Data System (ADS)

de Filippis, Tiziana; Rocchi, Leandro; Rapisardi, Elena

2015-04-01

The sharing of research data is a new challenge for the scientific community that may benefit from a large amount of information to solve environmental issues and sustainability in agriculture and urban contexts. Prerequisites for this challenge is the development of an infrastructure that ensure access, management and preservation of data, technical support for a coordinated and harmonious management of data that, in the framework of Open Data Policies, should encourages the reuse and the collaboration. The neogeography and the citizen as sensors approach, highlight that new data sources need a new set of tools and practices so to collect, validate, categorize, and use / access these "crowdsourced" data, that integrate the data sets produced in the scientific field, thus "feeding" the overall available data for analysis and research. When the scientific community embraces the dimension of collaboration and sharing, access and re-use, in order to accept the open innovation approach, it should redesign and reshape the processes of data management: the challenges of technological and cultural innovation, enabled by web 2.0 technologies, bring to the scenario where the sharing of structured and interoperable data will constitute the unavoidable building block to set up a new paradigm of scientific research. In this perspective the Institute of Biometeorology, CNR, whose aim is contributing to sharing and development of research data, has developed the "SensorWebHub" (SWH) infrastructure to support the scientific activities carried out in several research projects at national and international level. It is designed to manage both mobile and fixed open source meteorological and environmental sensors, in order to integrate the existing agro-meteorological and urban monitoring networks. The proposed architecture uses open source tools to ensure sustainability in the development and deployment of web applications with geographic features and custom analysis, as requested by the different research projects. The SWH components are organized in typical client-server architecture and interact from the sensing process to the representation of the results to the end-users. The Web Application enables to view and analyse the data stored in the GeoDB. The interface is designed following Internet browsers specifications allowing the visualization of collected data in different formats (tabular, chart and geographic map). The services for the dissemination of geo-referenced information, adopt the OGC specifications. SWH is a bottom-up collaborative initiative to share real time research data and pave the way for a open innovation approach in the scientific research. Until now this framework has been used for several WebGIS applications and WebApp for environmental monitoring at different temporal and spatial scales.

LabKey Server: an open source platform for scientific data integration, analysis and collaboration.

PubMed

Nelson, Elizabeth K; Piehler, Britt; Eckels, Josh; Rauch, Adam; Bellew, Matthew; Hussey, Peter; Ramsay, Sarah; Nathe, Cory; Lum, Karl; Krouse, Kevin; Stearns, David; Connolly, Brian; Skillman, Tom; Igra, Mark

2011-03-09

Broad-based collaborations are becoming increasingly common among disease researchers. For example, the Global HIV Enterprise has united cross-disciplinary consortia to speed progress towards HIV vaccines through coordinated research across the boundaries of institutions, continents and specialties. New, end-to-end software tools for data and specimen management are necessary to achieve the ambitious goals of such alliances. These tools must enable researchers to organize and integrate heterogeneous data early in the discovery process, standardize processes, gain new insights into pooled data and collaborate securely. To meet these needs, we enhanced the LabKey Server platform, formerly known as CPAS. This freely available, open source software is maintained by professional engineers who use commercially proven practices for software development and maintenance. Recent enhancements support: (i) Submitting specimens requests across collaborating organizations (ii) Graphically defining new experimental data types, metadata and wizards for data collection (iii) Transitioning experimental results from a multiplicity of spreadsheets to custom tables in a shared database (iv) Securely organizing, integrating, analyzing, visualizing and sharing diverse data types, from clinical records to specimens to complex assays (v) Interacting dynamically with external data sources (vi) Tracking study participants and cohorts over time (vii) Developing custom interfaces using client libraries (viii) Authoring custom visualizations in a built-in R scripting environment. Diverse research organizations have adopted and adapted LabKey Server, including consortia within the Global HIV Enterprise. Atlas is an installation of LabKey Server that has been tailored to serve these consortia. It is in production use and demonstrates the core capabilities of LabKey Server. Atlas now has over 2,800 active user accounts originating from approximately 36 countries and 350 organizations. It tracks roughly 27,000 assay runs, 860,000 specimen vials and 1,300,000 vial transfers. Sharing data, analysis tools and infrastructure can speed the efforts of large research consortia by enhancing efficiency and enabling new insights. The Atlas installation of LabKey Server demonstrates the utility of the LabKey platform for collaborative research. Stable, supported builds of LabKey Server are freely available for download at http://www.labkey.org. Documentation and source code are available under the Apache License 2.0.

LabKey Server: An open source platform for scientific data integration, analysis and collaboration

PubMed Central

2011-01-01

Background Broad-based collaborations are becoming increasingly common among disease researchers. For example, the Global HIV Enterprise has united cross-disciplinary consortia to speed progress towards HIV vaccines through coordinated research across the boundaries of institutions, continents and specialties. New, end-to-end software tools for data and specimen management are necessary to achieve the ambitious goals of such alliances. These tools must enable researchers to organize and integrate heterogeneous data early in the discovery process, standardize processes, gain new insights into pooled data and collaborate securely. Results To meet these needs, we enhanced the LabKey Server platform, formerly known as CPAS. This freely available, open source software is maintained by professional engineers who use commercially proven practices for software development and maintenance. Recent enhancements support: (i) Submitting specimens requests across collaborating organizations (ii) Graphically defining new experimental data types, metadata and wizards for data collection (iii) Transitioning experimental results from a multiplicity of spreadsheets to custom tables in a shared database (iv) Securely organizing, integrating, analyzing, visualizing and sharing diverse data types, from clinical records to specimens to complex assays (v) Interacting dynamically with external data sources (vi) Tracking study participants and cohorts over time (vii) Developing custom interfaces using client libraries (viii) Authoring custom visualizations in a built-in R scripting environment. Diverse research organizations have adopted and adapted LabKey Server, including consortia within the Global HIV Enterprise. Atlas is an installation of LabKey Server that has been tailored to serve these consortia. It is in production use and demonstrates the core capabilities of LabKey Server. Atlas now has over 2,800 active user accounts originating from approximately 36 countries and 350 organizations. It tracks roughly 27,000 assay runs, 860,000 specimen vials and 1,300,000 vial transfers. Conclusions Sharing data, analysis tools and infrastructure can speed the efforts of large research consortia by enhancing efficiency and enabling new insights. The Atlas installation of LabKey Server demonstrates the utility of the LabKey platform for collaborative research. Stable, supported builds of LabKey Server are freely available for download at http://www.labkey.org. Documentation and source code are available under the Apache License 2.0. PMID:21385461

Social network of PESCA (Open Source Platform for eHealth).

PubMed

Sanchez, Carlos L; Romero-Cuevas, Miguel; Lopez, Diego M; Lorca, Julio; Alcazar, Francisco J; Ruiz, Sergio; Mercado, Carmen; Garcia-Fortea, Pedro

2008-01-01

Information and Communication Technologies (ICTs) are revolutionizing how healthcare systems deliver top-quality care to citizens. In this way, Open Source Software (OSS) has demonstrated to be an important strategy to spread ICTs use. Several human and technological barriers in adopting OSS for healthcare have been identified. Human barriers include user acceptance, limited support, technical skillfulness, awareness, resistance to change, etc., while Technological barriers embrace need for open standards, heterogeneous OSS developed without normalization and metrics, lack of initiatives to evaluate existing health OSS and need for quality control and functional validation. The goals of PESCA project are to create a platform of interoperable modules to evaluate, classify and validate good practices in health OSS. Furthermore, a normalization platform will provide interoperable solutions in the fields of healthcare services, health surveillance, health literature, and health education, knowledge and research. Within the platform, the first goal to achieve is the setup of the collaborative work infrastructure. The platform is being organized as a Social Network which works to evaluate five scopes of every existing open source tools for eHealth: Open Source Software, Quality, Pedagogical, Security and privacy and Internationalization/I18N. In the meantime, the knowledge collected from the networking will configure a Good Practice Repository on eHealth promoting the effective use of ICT on behalf of the citizen's health.

Human-assisted sound event recognition for home service robots.

PubMed

Do, Ha Manh; Sheng, Weihua; Liu, Meiqin

This paper proposes and implements an open framework of active auditory learning for a home service robot to serve the elderly living alone at home. The framework was developed to realize the various auditory perception capabilities while enabling a remote human operator to involve in the sound event recognition process for elderly care. The home service robot is able to estimate the sound source position and collaborate with the human operator in sound event recognition while protecting the privacy of the elderly. Our experimental results validated the proposed framework and evaluated auditory perception capabilities and human-robot collaboration in sound event recognition.

The Azimuth Project: an Open-Access Educational Resource

NASA Astrophysics Data System (ADS)

Baez, J. C.

2012-12-01

The Azimuth Project is an online collaboration of scientists, engineers and programmers who are volunteering their time to do something about a wide range of environmental problems. The project has several aspects: 1) a wiki designed to make reliable, sourced information easy to find and accessible to a technically literate nonexperts, 2) a blog featuring expository articles and news items, 3) a project to write programs that explain basic concepts of climate physics and illustrate principles of good open-source software design, and 4) a project to develop mathematical tools for studying complex networked systems. We discuss the progress so far and some preliminary lessons. For example, enlisting the help of experts outside academia highlights the problems with pay-walled journals and the benefits of open access, as well as differences between how software development is done commercially, in the free software community, and in academe.

PhysioNet: physiologic signals, time series and related open source software for basic, clinical, and applied research.

PubMed

Moody, George B; Mark, Roger G; Goldberger, Ary L

2011-01-01

PhysioNet provides free web access to over 50 collections of recorded physiologic signals and time series, and related open-source software, in support of basic, clinical, and applied research in medicine, physiology, public health, biomedical engineering and computing, and medical instrument design and evaluation. Its three components (PhysioBank, the archive of signals; PhysioToolkit, the software library; and PhysioNetWorks, the virtual laboratory for collaborative development of future PhysioBank data collections and PhysioToolkit software components) connect researchers and students who need physiologic signals and relevant software with researchers who have data and software to share. PhysioNet's annual open engineering challenges stimulate rapid progress on unsolved or poorly solved questions of basic or clinical interest, by focusing attention on achievable solutions that can be evaluated and compared objectively using freely available reference data.

A Cloud-based, Open-Source, Command-and-Control Software Paradigm for Space Situational Awareness (SSA)

NASA Astrophysics Data System (ADS)

Melton, R.; Thomas, J.

With the rapid growth in the number of space actors, there has been a marked increase in the complexity and diversity of software systems utilized to support SSA target tracking, indication, warning, and collision avoidance. Historically, most SSA software has been constructed with "closed" proprietary code, which limits interoperability, inhibits the code transparency that some SSA customers need to develop domain expertise, and prevents the rapid injection of innovative concepts into these systems. Open-source aerospace software, a rapidly emerging, alternative trend in code development, is based on open collaboration, which has the potential to bring greater transparency, interoperability, flexibility, and reduced development costs. Open-source software is easily adaptable, geared to rapidly changing mission needs, and can generally be delivered at lower costs to meet mission requirements. This paper outlines Ball's COSMOS C2 system, a fully open-source, web-enabled, command-and-control software architecture which provides several unique capabilities to move the current legacy SSA software paradigm to an open source model that effectively enables pre- and post-launch asset command and control. Among the unique characteristics of COSMOS is the ease with which it can integrate with diverse hardware. This characteristic enables COSMOS to serve as the command-and-control platform for the full life-cycle development of SSA assets, from board test, to box test, to system integration and test, to on-orbit operations. The use of a modern scripting language, Ruby, also permits automated procedures to provide highly complex decision making for the tasking of SSA assets based on both telemetry data and data received from outside sources. Detailed logging enables quick anomaly detection and resolution. Integrated real-time and offline data graphing renders the visualization of the both ground and on-orbit assets simple and straightforward.

Embracing the Open-Source Movement for the Management of Spatial Data: A Case Study of African Trypanosomiasis in Kenya

PubMed Central

Langley, Shaun A.; Messina, Joseph P.

2011-01-01

The past decade has seen an explosion in the availability of spatial data not only for researchers, but the public alike. As the quantity of data increases, the ability to effectively navigate and understand the data becomes more challenging. Here we detail a conceptual model for a spatially explicit database management system that addresses the issues raised with the growing data management problem. We demonstrate utility with a case study in disease ecology: to develop a multi-scale predictive model of African Trypanosomiasis in Kenya. International collaborations and varying technical expertise necessitate a modular open-source software solution. Finally, we address three recurring problems with data management: scalability, reliability, and security. PMID:21686072

Embracing the Open-Source Movement for the Management of Spatial Data: A Case Study of African Trypanosomiasis in Kenya.

PubMed

Langley, Shaun A; Messina, Joseph P

2011-01-01

The past decade has seen an explosion in the availability of spatial data not only for researchers, but the public alike. As the quantity of data increases, the ability to effectively navigate and understand the data becomes more challenging. Here we detail a conceptual model for a spatially explicit database management system that addresses the issues raised with the growing data management problem. We demonstrate utility with a case study in disease ecology: to develop a multi-scale predictive model of African Trypanosomiasis in Kenya. International collaborations and varying technical expertise necessitate a modular open-source software solution. Finally, we address three recurring problems with data management: scalability, reliability, and security.

HydroDesktop as a Community Designed and Developed Resource for Hydrologic Data Discovery and Analysis

NASA Astrophysics Data System (ADS)

Ames, D. P.

2013-12-01

As has been seen in other informatics fields, well-documented and appropriately licensed open source software tools have the potential to significantly increase both opportunities and motivation for inter-institutional science and technology collaboration. The CUAHSI HIS (and related HydroShare) projects have aimed to foster such activities in hydrology resulting in the development of many useful community software components including the HydroDesktop software application. HydroDesktop is an open source, GIS-based, scriptable software application for discovering data on the CUAHSI Hydrologic Information System and related resources. It includes a well-defined plugin architecture and interface to allow 3rd party developers to create extensions and add new functionality without requiring recompiling of the full source code. HydroDesktop is built in the C# programming language and uses the open source DotSpatial GIS engine for spatial data management. Capabilities include data search, discovery, download, visualization, and export. An extension that integrates the R programming language with HydroDesktop provides scripting and data automation capabilities and an OpenMI plugin provides the ability to link models. Current revision and updates to HydroDesktop include migration of core business logic to cross platform, scriptable Python code modules that can be executed in any operating system or linked into other software front-end applications.

Tycho 2: A Proxy Application for Kinetic Transport Sweeps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrett, Charles Kristopher; Warsa, James S.

2016-09-14

Tycho 2 is a proxy application that implements discrete ordinates (SN) kinetic transport sweeps on unstructured, 3D, tetrahedral meshes. It has been designed to be small and require minimal dependencies to make collaboration and experimentation as easy as possible. Tycho 2 has been released as open source software. The software is currently in a beta release with plans for a stable release (version 1.0) before the end of the year. The code is parallelized via MPI across spatial cells and OpenMP across angles. Currently, several parallelization algorithms are implemented.

Multi-Disciplinary Analysis and Optimization Frameworks

NASA Technical Reports Server (NTRS)

Naiman, Cynthia Gutierrez

2009-01-01

Since July 2008, the Multidisciplinary Analysis & Optimization Working Group (MDAO WG) of the Systems Analysis Design & Optimization (SAD&O) discipline in the Fundamental Aeronautics Program s Subsonic Fixed Wing (SFW) project completed one major milestone, Define Architecture & Interfaces for Next Generation Open Source MDAO Framework Milestone (9/30/08), and is completing the Generation 1 Framework validation milestone, which is due December 2008. Included in the presentation are: details of progress on developing the Open MDAO framework, modeling and testing the Generation 1 Framework, progress toward establishing partnerships with external parties, and discussion of additional potential collaborations

Sharing Lessons-Learned on Effective Open Data, Open-Source Practices from OpenAQ, a Global Open Air Quality Community.

NASA Astrophysics Data System (ADS)

Hasenkopf, C. A.

2017-12-01

Increasingly, open data, open-source projects are unearthing rich datasets and tools, previously impossible for more traditional avenues to generate. These projects are possible, in part, because of the emergence of online collaborative and code-sharing tools, decreasing costs of cloud-based services to fetch, store, and serve data, and increasing interest of individuals to contribute their time and skills to 'open projects.' While such projects have generated palpable enthusiasm from many sectors, many of these projects face uncharted paths for sustainability, visibility, and acceptance. Our project, OpenAQ, is an example of an open-source, open data community that is currently forging its own uncharted path. OpenAQ is an open air quality data platform that aggregates and universally formats government and research-grade air quality data from 50 countries across the world. To date, we make available more than 76 million air quality (PM2.5, PM10, SO2, NO2, O3, CO and black carbon) data points through an open Application Programming Interface (API) and a user-customizable download interface at https://openaq.org. The goal of the platform is to enable an ecosystem of users to advance air pollution efforts from science to policy to the private sector. The platform is also an open-source project (https://github.com/openaq) and has only been made possible through the coding and data contributions of individuals around the world. In our first two years of existence, we have seen requests for data to our API skyrocket to more than 6 million datapoints per month, and use-cases as varied as ingesting data aggregated from our system into real-time models of wildfires to building open-source statistical packages (e.g. ropenaq and py-openaq) on top of the platform to creating public-friendly apps and chatbots. We will share a whirl-wind trip through our evolution and the many lessons learned so far related to platform structure, community engagement, organizational model type and sustainability.

A Web-based Tool for Transparent, Collaborative Urban Water System Planning for Monterrey, Mexico

NASA Astrophysics Data System (ADS)

Rheinheimer, D. E.; Medellin-Azuara, J.; Garza Díaz, L. E.; Ramírez, A. I.

2017-12-01

Recent rapid advances in web technologies and cloud computing show great promise for facilitating collaboration and transparency in water planning efforts. Water resources planning is increasingly in the context of a rapidly urbanizing world, particularly in developing countries. In such countries with democratic traditions, the degree of transparency and collaboration in water planning can mean the difference between success and failure of water planning efforts. This is exemplified in the city of Monterrey, Mexico, where an effort to build a new long-distance aqueduct to increase water supply to the city dramatically failed due to lack of transparency and top-down planning. To help address, we used a new, web-based water system modeling platform, called OpenAgua, to develop a prototype decision support system for water planning in Monterrey. OpenAgua is designed to promote transparency and collaboration, as well as provide strong, cloud-based, water system modeling capabilities. We developed and assessed five water management options intended to increase water supply yield and/or reliability, a dominant water management concern in Latin America generally: 1) a new long-distance source (the previously-rejected project), 2) a new nearby reservoir, 3) expansion/re-operation of an existing major canal, 4) desalination, and 5) industrial water reuse. Using the integrated modeling and analytic capabilities of OpenAgua, and some customization, we assessed the performance of these options for water supply yield and reliability to help identify the most promising ones. In presenting this assessment, we demonstrate the viability of using online, cloud-based modeling systems for improving transparency and collaboration in decision making, reducing the gap between citizens, policy makers and water managers, and future directions.

Moose: An Open-Source Framework to Enable Rapid Development of Collaborative, Multi-Scale, Multi-Physics Simulation Tools

NASA Astrophysics Data System (ADS)

Slaughter, A. E.; Permann, C.; Peterson, J. W.; Gaston, D.; Andrs, D.; Miller, J.

2014-12-01

The Idaho National Laboratory (INL)-developed Multiphysics Object Oriented Simulation Environment (MOOSE; www.mooseframework.org), is an open-source, parallel computational framework for enabling the solution of complex, fully implicit multiphysics systems. MOOSE provides a set of computational tools that scientists and engineers can use to create sophisticated multiphysics simulations. Applications built using MOOSE have computed solutions for chemical reaction and transport equations, computational fluid dynamics, solid mechanics, heat conduction, mesoscale materials modeling, geomechanics, and others. To facilitate the coupling of diverse and highly-coupled physical systems, MOOSE employs the Jacobian-free Newton-Krylov (JFNK) method when solving the coupled nonlinear systems of equations arising in multiphysics applications. The MOOSE framework is written in C++, and leverages other high-quality, open-source scientific software packages such as LibMesh, Hypre, and PETSc. MOOSE uses a "hybrid parallel" model which combines both shared memory (thread-based) and distributed memory (MPI-based) parallelism to ensure efficient resource utilization on a wide range of computational hardware. MOOSE-based applications are inherently modular, which allows for simulation expansion (via coupling of additional physics modules) and the creation of multi-scale simulations. Any application developed with MOOSE supports running (in parallel) any other MOOSE-based application. Each application can be developed independently, yet easily communicate with other applications (e.g., conductivity in a slope-scale model could be a constant input, or a complete phase-field micro-structure simulation) without additional code being written. This method of development has proven effective at INL and expedites the development of sophisticated, sustainable, and collaborative simulation tools.

Transmission from theory to practice: Experiences using open-source code development and a virtual short course to increase the adoption of new theoretical approaches

NASA Astrophysics Data System (ADS)

Harman, C. J.

2015-12-01

Even amongst the academic community, new theoretical tools can remain underutilized due to the investment of time and resources required to understand and implement them. This surely limits the frequency that new theory is rigorously tested against data by scientists outside the group that developed it, and limits the impact that new tools could have on the advancement of science. Reducing the barriers to adoption through online education and open-source code can bridge the gap between theory and data, forging new collaborations, and advancing science. A pilot venture aimed at increasing the adoption of a new theory of time-variable transit time distributions was begun in July 2015 as a collaboration between Johns Hopkins University and The Consortium of Universities for the Advancement of Hydrologic Science (CUAHSI). There were four main components to the venture: a public online seminar covering the theory, an open source code repository, a virtual short course designed to help participants apply the theory to their data, and an online forum to maintain discussion and build a community of users. 18 participants were selected for the non-public components based on their responses in an application, and were asked to fill out a course evaluation at the end of the short course, and again several months later. These evaluations, along with participation in the forum and on-going contact with the organizer suggest strengths and weaknesses in this combination of components to assist participants in adopting new tools.

The Global Earthquake Model and Disaster Risk Reduction

NASA Astrophysics Data System (ADS)

Smolka, A. J.

2015-12-01

Advanced, reliable and transparent tools and data to assess earthquake risk are inaccessible to most, especially in less developed regions of the world while few, if any, globally accepted standards currently allow a meaningful comparison of risk between places. The Global Earthquake Model (GEM) is a collaborative effort that aims to provide models, datasets and state-of-the-art tools for transparent assessment of earthquake hazard and risk. As part of this goal, GEM and its global network of collaborators have developed the OpenQuake engine (an open-source software for hazard and risk calculations), the OpenQuake platform (a web-based portal making GEM's resources and datasets freely available to all potential users), and a suite of tools to support modelers and other experts in the development of hazard, exposure and vulnerability models. These resources are being used extensively across the world in hazard and risk assessment, from individual practitioners to local and national institutions, and in regional projects to inform disaster risk reduction. Practical examples for how GEM is bridging the gap between science and disaster risk reduction are: - Several countries including Switzerland, Turkey, Italy, Ecuador, Papua-New Guinea and Taiwan (with more to follow) are computing national seismic hazard using the OpenQuake-engine. In some cases these results are used for the definition of actions in building codes. - Technical support, tools and data for the development of hazard, exposure, vulnerability and risk models for regional projects in South America and Sub-Saharan Africa. - Going beyond physical risk, GEM's scorecard approach evaluates local resilience by bringing together neighborhood/community leaders and the risk reduction community as a basis for designing risk reduction programs at various levels of geography. Actual case studies are Lalitpur in the Kathmandu Valley in Nepal and Quito/Ecuador. In agreement with GEM's collaborative approach, all projects are undertaken with strong involvement of local scientific and risk reduction communities. Open-source software and careful documentation of the methodologies create full transparency of the modelling process, so that results can be reproduced any time by third parties.

Flux Of Carbon from an Airborne Laboratory (FOCAL): Synergy of airborne and surface measures of carbon emission and isotopologue content from tundra landscape in Alaska

NASA Astrophysics Data System (ADS)

Dobosy, R.; Dumas, E.; Sayres, D. S.; Kochendorfer, J.

2013-12-01

Arctic tundra, recognized as a potential major source of new atmospheric carbon, is characterized by low topographic relief and small-scale heterogeneity consisting of small lakes and intervening tundra vegetation. This fits well the flux-fragment method (FFM) of analysis of data from low-flying aircraft. The FFM draws on 1)airborne eddy-covariance flux measurements, 2)a classified surface-characteristics map (e.g. open water vs tundra), 3)a footprint model, and 4)companion surface-based eddy-covariance flux measurements. The FOCAL, a collaboration among Harvard University's Anderson Group, NOAA's Atmospheric Turbulence and Diffusion Division (ATDD), and Aurora Flight Sciences, Inc., made coordinated flights in 2013 August with a collaborating surface site. The FOCAL gathers not only flux data for CH4 and CO2 but also the corresponding carbon-isotopologue content of these gases. The surface site provides a continuous sample of carbon flux from interstitial tundra over time throughout the period of the campaign. The FFM draws samples from the aircraft data over many instances of tundra and also open water. From this we will determine how representative the surface site is of the larger area (100 km linear scale), and how much the open water differs from the tundra as a source of carbon.

Anser EMT: the first open-source electromagnetic tracking platform for image-guided interventions.

PubMed

Jaeger, Herman Alexander; Franz, Alfred Michael; O'Donoghue, Kilian; Seitel, Alexander; Trauzettel, Fabian; Maier-Hein, Lena; Cantillon-Murphy, Pádraig

2017-06-01

Electromagnetic tracking is the gold standard for instrument tracking and navigation in the clinical setting without line of sight. Whilst clinical platforms exist for interventional bronchoscopy and neurosurgical navigation, the limited flexibility and high costs of electromagnetic tracking (EMT) systems for research investigations mitigate against a better understanding of the technology's characterisation and limitations. The Anser project provides an open-source implementation for EMT with particular application to image-guided interventions. This work provides implementation schematics for our previously reported EMT system which relies on low-cost acquisition and demodulation techniques using both National Instruments and Arduino hardware alongside MATLAB support code. The system performance is objectively compared to other commercial tracking platforms using the Hummel assessment protocol. Positional accuracy of 1.14 mm and angular rotation accuracy of [Formula: see text] are reported. Like other EMT platforms, Anser is susceptible to tracking errors due to eddy current and ferromagnetic distortion. The system is compatible with commercially available EMT sensors as well as the Open Network Interface for image-guided therapy (OpenIGTLink) for easy communication with visualisation and medical imaging toolkits such as MITK and 3D Slicer. By providing an open-source platform for research investigations, we believe that novel and collaborative approaches can overcome the limitations of current EMT technology.

Collaborative development of predictive toxicology applications

PubMed Central

2010-01-01

OpenTox provides an interoperable, standards-based Framework for the support of predictive toxicology data management, algorithms, modelling, validation and reporting. It is relevant to satisfying the chemical safety assessment requirements of the REACH legislation as it supports access to experimental data, (Quantitative) Structure-Activity Relationship models, and toxicological information through an integrating platform that adheres to regulatory requirements and OECD validation principles. Initial research defined the essential components of the Framework including the approach to data access, schema and management, use of controlled vocabularies and ontologies, architecture, web service and communications protocols, and selection and integration of algorithms for predictive modelling. OpenTox provides end-user oriented tools to non-computational specialists, risk assessors, and toxicological experts in addition to Application Programming Interfaces (APIs) for developers of new applications. OpenTox actively supports public standards for data representation, interfaces, vocabularies and ontologies, Open Source approaches to core platform components, and community-based collaboration approaches, so as to progress system interoperability goals. The OpenTox Framework includes APIs and services for compounds, datasets, features, algorithms, models, ontologies, tasks, validation, and reporting which may be combined into multiple applications satisfying a variety of different user needs. OpenTox applications are based on a set of distributed, interoperable OpenTox API-compliant REST web services. The OpenTox approach to ontology allows for efficient mapping of complementary data coming from different datasets into a unifying structure having a shared terminology and representation. Two initial OpenTox applications are presented as an illustration of the potential impact of OpenTox for high-quality and consistent structure-activity relationship modelling of REACH-relevant endpoints: ToxPredict which predicts and reports on toxicities for endpoints for an input chemical structure, and ToxCreate which builds and validates a predictive toxicity model based on an input toxicology dataset. Because of the extensible nature of the standardised Framework design, barriers of interoperability between applications and content are removed, as the user may combine data, models and validation from multiple sources in a dependable and time-effective way. PMID:20807436

Collaborative development of predictive toxicology applications.

PubMed

Hardy, Barry; Douglas, Nicki; Helma, Christoph; Rautenberg, Micha; Jeliazkova, Nina; Jeliazkov, Vedrin; Nikolova, Ivelina; Benigni, Romualdo; Tcheremenskaia, Olga; Kramer, Stefan; Girschick, Tobias; Buchwald, Fabian; Wicker, Joerg; Karwath, Andreas; Gütlein, Martin; Maunz, Andreas; Sarimveis, Haralambos; Melagraki, Georgia; Afantitis, Antreas; Sopasakis, Pantelis; Gallagher, David; Poroikov, Vladimir; Filimonov, Dmitry; Zakharov, Alexey; Lagunin, Alexey; Gloriozova, Tatyana; Novikov, Sergey; Skvortsova, Natalia; Druzhilovsky, Dmitry; Chawla, Sunil; Ghosh, Indira; Ray, Surajit; Patel, Hitesh; Escher, Sylvia

2010-08-31

OpenTox provides an interoperable, standards-based Framework for the support of predictive toxicology data management, algorithms, modelling, validation and reporting. It is relevant to satisfying the chemical safety assessment requirements of the REACH legislation as it supports access to experimental data, (Quantitative) Structure-Activity Relationship models, and toxicological information through an integrating platform that adheres to regulatory requirements and OECD validation principles. Initial research defined the essential components of the Framework including the approach to data access, schema and management, use of controlled vocabularies and ontologies, architecture, web service and communications protocols, and selection and integration of algorithms for predictive modelling. OpenTox provides end-user oriented tools to non-computational specialists, risk assessors, and toxicological experts in addition to Application Programming Interfaces (APIs) for developers of new applications. OpenTox actively supports public standards for data representation, interfaces, vocabularies and ontologies, Open Source approaches to core platform components, and community-based collaboration approaches, so as to progress system interoperability goals.The OpenTox Framework includes APIs and services for compounds, datasets, features, algorithms, models, ontologies, tasks, validation, and reporting which may be combined into multiple applications satisfying a variety of different user needs. OpenTox applications are based on a set of distributed, interoperable OpenTox API-compliant REST web services. The OpenTox approach to ontology allows for efficient mapping of complementary data coming from different datasets into a unifying structure having a shared terminology and representation.Two initial OpenTox applications are presented as an illustration of the potential impact of OpenTox for high-quality and consistent structure-activity relationship modelling of REACH-relevant endpoints: ToxPredict which predicts and reports on toxicities for endpoints for an input chemical structure, and ToxCreate which builds and validates a predictive toxicity model based on an input toxicology dataset. Because of the extensible nature of the standardised Framework design, barriers of interoperability between applications and content are removed, as the user may combine data, models and validation from multiple sources in a dependable and time-effective way.

An open source web interface for linking models to infrastructure system databases

NASA Astrophysics Data System (ADS)

Knox, S.; Mohamed, K.; Harou, J. J.; Rheinheimer, D. E.; Medellin-Azuara, J.; Meier, P.; Tilmant, A.; Rosenberg, D. E.

2016-12-01

Models of networked engineered resource systems such as water or energy systems are often built collaboratively with developers from different domains working at different locations. These models can be linked to large scale real world databases, and they are constantly being improved and extended. As the development and application of these models becomes more sophisticated, and the computing power required for simulations and/or optimisations increases, so has the need for online services and tools which enable the efficient development and deployment of these models. Hydra Platform is an open source, web-based data management system, which allows modellers of network-based models to remotely store network topology and associated data in a generalised manner, allowing it to serve multiple disciplines. Hydra Platform uses a web API using JSON to allow external programs (referred to as `Apps') to interact with its stored networks and perform actions such as importing data, running models, or exporting the networks to different formats. Hydra Platform supports multiple users accessing the same network and has a suite of functions for managing users and data. We present ongoing development in Hydra Platform, the Hydra Web User Interface, through which users can collaboratively manage network data and models in a web browser. The web interface allows multiple users to graphically access, edit and share their networks, run apps and view results. Through apps, which are located on the server, the web interface can give users access to external data sources and models without the need to install or configure any software. This also ensures model results can be reproduced by removing platform or version dependence. Managing data and deploying models via the web interface provides a way for multiple modellers to collaboratively manage data, deploy and monitor model runs and analyse results.

LSST Resources for the Community

NASA Astrophysics Data System (ADS)

Jones, R. Lynne

2011-01-01

LSST will generate 100 petabytes of images and 20 petabytes of catalogs, covering 18,000-20,000 square degrees of area sampled every few days, throughout a total of ten years of time -- all publicly available and exquisitely calibrated. The primary access to this data will be through Data Access Centers (DACs). DACs will provide access to catalogs of sources (single detections from individual images) and objects (associations of sources from multiple images). Simple user interfaces or direct SQL queries at the DAC can return user-specified portions of data from catalogs or images. More complex manipulations of the data, such as calculating multi-point correlation functions or creating alternative photo-z measurements on terabyte-scale data, can be completed with the DAC's own resources. Even more data-intensive computations requiring access to large numbers of image pixels on petabyte-scale could also be conducted at the DAC, using compute resources allocated in a similar manner to a TAC. DAC resources will be available to all individuals in member countries or institutes and LSST science collaborations. DACs will also assist investigators with requests for allocations at national facilities such as the Petascale Computing Facility, TeraGrid, and Open Science Grid. Using data on this scale requires new approaches to accessibility and analysis which are being developed through interactions with the LSST Science Collaborations. We are producing simulated images (as might be acquired by LSST) based on models of the universe and generating catalogs from these images (as well as from the base model) using the LSST data management framework in a series of data challenges. The resulting images and catalogs are being made available to the science collaborations to verify the algorithms and develop user interfaces. All LSST software is open source and available online, including preliminary catalog formats. We encourage feedback from the community.

Coordinating the Commons: Diversity & Dynamics in Open Collaborations

ERIC Educational Resources Information Center

Morgan, Jonathan T.

2013-01-01

The success of Wikipedia demonstrates that open collaboration can be an effective model for organizing geographically-distributed volunteers to perform complex, sustained work at a massive scale. However, Wikipedia's history also demonstrates some of the challenges that large, long-term open collaborations face: the core community of Wikipedia…

The polarised internal target for the PAX experiment

NASA Astrophysics Data System (ADS)

Ciullo, G.; Barion, L.; Barschel, C.; Grigoriev, K.; Lenisa, P.; Nass, A.; Sarkadi, J.; Statera, M.; Steffens, E.; Tagliente, G.

2011-05-01

The PAX (Polarized Antiproton eXperiment) collaboration aims to polarise antiproton beams stored in ring by means of spin-filtering. The experimental setup is based on a polarised internal gas target, surrounded by a detection system for the measurement of spin observables. In this report, we present results from the commission of the PAX target (atomic beam source, openable cell, and polarimeter).

Are Review Skills and Academic Writing Skills Related? An Exploratory Analysis via Multi Source Feedback Tools

ERIC Educational Resources Information Center

Razi, Salim

2016-01-01

Because students learn from each other as well as lecturers, it is important to create opportunities for collaboration in writing classes. Teachers now benefit from access to plagiarism detectors that can also provide feedback. This exploratory study considers the role of four review types, open and anonymous, involving the students themselves,…

The Programmers' Collective: Fostering Participatory Culture by Making Music Videos in a High School Scratch Coding Workshop

ERIC Educational Resources Information Center

Fields, Deborah; Vasudevan, Veena; Kafai, Yasmin B.

2015-01-01

We highlight ways to support interest-driven creation of digital media in Scratch, a visual-based programming language and community, within a high school programming workshop. We describe a collaborative approach, the programmers' collective, that builds on social models found in do-it-yourself and open source communities, but with scaffolding…

Collaborative Autonomy with Group Autonomy for Mobile Systems (GAMS)

DTIC Science & Technology

2014-11-18

Carnegie Mellon University for the operation of the Software Engineering Institute, a federally funded research and development center. Any opinions...tutorials, doxygen) Intro MADARA GAMS Conclusion 9 James Edmondson © 2014 Carnegie Mellon University How MADARA helps researchers and developers...architecture portability to prevent vendor lock-in and shorten transition timeframe • Open source. Free. Extensible. • Allows reseachers to focus

ERDDAP: Reducing Data Friction with an Open Source Data Platform

NASA Astrophysics Data System (ADS)

O'Brien, K.

2017-12-01

Data friction is not just an issue facing interdisciplinary research. Often times, even within disciplines, significant data friction can exist. Issues of differing formats, limited metadata and non-existent machine-to-machine data access are all issues that exist within disciplines and make it that much harder for successful interdisciplinary cooperation. Therefore, reducing data friction within disciplines is crucial first step in providing better overall collaboration. ERDDAP, an open source data platform developed at NOAA's Southwest Fisheries Center, is well poised to improve data useability and understanding and reduce data friction, both in single and multi-disciplinary research. By virtue of its ability to integrate data of varying formats and provide RESTful-based user access to data and metadata, use of ERDDAP has grown substantially throughout the ocean data community. ERDDAP also supports standards such as the DAP data protocol, the Climate and Forecast (CF) metadata conventions and the Bagit document standard for data archival. In this presentation, we will discuss the advantages of using ERDDAP as a data platform. We will also show specific use cases where utilizing ERDDAP has reduced friction within a single discipline (physical oceanography) and improved interdisciplinary collaboration as well.

MITK-OpenIGTLink for combining open-source toolkits in real-time computer-assisted interventions.

PubMed

Klemm, Martin; Kirchner, Thomas; Gröhl, Janek; Cheray, Dominique; Nolden, Marco; Seitel, Alexander; Hoppe, Harald; Maier-Hein, Lena; Franz, Alfred M

2017-03-01

Due to rapid developments in the research areas of medical imaging, medical image processing and robotics, computer-assisted interventions (CAI) are becoming an integral part of modern patient care. From a software engineering point of view, these systems are highly complex and research can benefit greatly from reusing software components. This is supported by a number of open-source toolkits for medical imaging and CAI such as the medical imaging interaction toolkit (MITK), the public software library for ultrasound imaging research (PLUS) and 3D Slicer. An independent inter-toolkit communication such as the open image-guided therapy link (OpenIGTLink) can be used to combine the advantages of these toolkits and enable an easier realization of a clinical CAI workflow. MITK-OpenIGTLink is presented as a network interface within MITK that allows easy to use, asynchronous two-way messaging between MITK and clinical devices or other toolkits. Performance and interoperability tests with MITK-OpenIGTLink were carried out considering the whole CAI workflow from data acquisition over processing to visualization. We present how MITK-OpenIGTLink can be applied in different usage scenarios. In performance tests, tracking data were transmitted with a frame rate of up to 1000 Hz and a latency of 2.81 ms. Transmission of images with typical ultrasound (US) and greyscale high-definition (HD) resolutions of [Formula: see text] and [Formula: see text] is possible at up to 512 and 128 Hz, respectively. With the integration of OpenIGTLink into MITK, this protocol is now supported by all established open-source toolkits in the field. This eases interoperability between MITK and toolkits such as PLUS or 3D Slicer and facilitates cross-toolkit research collaborations. MITK and its submodule MITK-OpenIGTLink are provided open source under a BSD-style licence ( http://mitk.org ).

The Earth System Grid Federation: An Open Infrastructure for Access to Distributed Geospatial Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ananthakrishnan, Rachana; Bell, Gavin; Cinquini, Luca

2013-01-01

The Earth System Grid Federation (ESGF) is a multi-agency, international collaboration that aims at developing the software infrastructure needed to facilitate and empower the study of climate change on a global scale. The ESGF s architecture employs a system of geographically distributed peer nodes, which are independently administered yet united by the adoption of common federation protocols and application programming interfaces (APIs). The cornerstones of its interoperability are the peer-to-peer messaging that is continuously exchanged among all nodes in the federation; a shared architecture and API for search and discovery; and a security infrastructure based on industry standards (OpenID, SSL,more » GSI and SAML). The ESGF software is developed collaboratively across institutional boundaries and made available to the community as open source. It has now been adopted by multiple Earth science projects and allows access to petabytes of geophysical data, including the entire model output used for the next international assessment report on climate change (IPCC-AR5) and a suite of satellite observations (obs4MIPs) and reanalysis data sets (ANA4MIPs).« less

The Earth System Grid Federation: An Open Infrastructure for Access to Distributed Geo-Spatial Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cinquini, Luca; Crichton, Daniel; Miller, Neill

2012-01-01

The Earth System Grid Federation (ESGF) is a multi-agency, international collaboration that aims at developing the software infrastructure needed to facilitate and empower the study of climate change on a global scale. The ESGF s architecture employs a system of geographically distributed peer nodes, which are independently administered yet united by the adoption of common federation protocols and application programming interfaces (APIs). The cornerstones of its interoperability are the peer-to-peer messaging that is continuously exchanged among all nodes in the federation; a shared architecture and API for search and discovery; and a security infrastructure based on industry standards (OpenID, SSL,more » GSI and SAML). The ESGF software is developed collaboratively across institutional boundaries and made available to the community as open source. It has now been adopted by multiple Earth science projects and allows access to petabytes of geophysical data, including the entire model output used for the next international assessment report on climate change (IPCC-AR5) and a suite of satellite observations (obs4MIPs) and reanalysis data sets (ANA4MIPs).« less

My care pathways - creating open innovation in healthcare.

PubMed

Lundberg, Nina; Koch, Sabine; Hägglund, Maria; Bolin, Peter; Davoody, Nadia; Eltes, Johan; Jarlman, Olof; Perlich, Anja; Vimarlund, Vivian; Winsnes, Casper

2013-01-01

In this paper we describe initial results from the Swedish innovation project "My Care Pathways" which envisions enabling citizens to track their own health by providing them with online access to their historical, current and prospective future events. We describe an information infrastructure and its base services as well as the use of this solution as an open source platform for open innovation in healthcare. This will facilitate the development of end-user e-services for citizens. We have technically enabled the information infrastructure in close collaboration with decision makers in three Swedish health care regions, and system vendors as well as with National eHealth projects. Close collaboration between heterogeneous actors made implementation in real practice possible. However, a number of challenges, mainly related to legal and business issues, persist when implementing our results. Future work should therefore target the development of business models for sustainable provision of end-user e-services in a public health care system such as the Swedish one. Also, a legal analysis of the development of third party provider (nonhealthcare based) personal health data e-services should be done.

The Earth System Grid Federation : an Open Infrastructure for Access to Distributed Geospatial Data

NASA Technical Reports Server (NTRS)

Cinquini, Luca; Crichton, Daniel; Mattmann, Chris; Harney, John; Shipman, Galen; Wang, Feiyi; Ananthakrishnan, Rachana; Miller, Neill; Denvil, Sebastian; Morgan, Mark;

Building integrated business environments: analysing open-source ESB

NASA Astrophysics Data System (ADS)

Martínez-Carreras, M. A.; García Jimenez, F. J.; Gómez Skarmeta, A. F.

2015-05-01

Integration and interoperability are two concepts that have gained significant prominence in the business field, providing tools which enable enterprise application integration (EAI). In this sense, enterprise service bus (ESB) has played a crucial role as the underpinning technology for creating integrated environments in which companies may connect all their legacy-applications. However, the potential of these technologies remains unknown and some important features are not used to develop suitable business environments. The aim of this paper is to describe and detail the elements for building the next generation of integrated business environments (IBE) and to analyse the features of ESBs as the core of this infrastructure. For this purpose, we evaluate how well-known open-source ESB products fulfil these needs. Moreover, we introduce a scenario in which the collaborative system 'Alfresco' is integrated in the business infrastructure. Finally, we provide a comparison of the different open-source ESBs available for IBE requirements. According to this study, Fuse ESB provides the best results, considering features such as support for a wide variety of standards and specifications, documentation and implementation, security, advanced business trends, ease of integration and performance.

Energy Spectral Behaviors of Communication Networks of Open-Source Communities

PubMed Central

Yang, Jianmei; Yang, Huijie; Liao, Hao; Wang, Jiangtao; Zeng, Jinqun

2015-01-01

Large-scale online collaborative production activities in open-source communities must be accompanied by large-scale communication activities. Nowadays, the production activities of open-source communities, especially their communication activities, have been more and more concerned. Take CodePlex C # community for example, this paper constructs the complex network models of 12 periods of communication structures of the community based on real data; then discusses the basic concepts of quantum mapping of complex networks, and points out that the purpose of the mapping is to study the structures of complex networks according to the idea of quantum mechanism in studying the structures of large molecules; finally, according to this idea, analyzes and compares the fractal features of the spectra in different quantum mappings of the networks, and concludes that there are multiple self-similarity and criticality in the communication structures of the community. In addition, this paper discusses the insights and application conditions of different quantum mappings in revealing the characteristics of the structures. The proposed quantum mapping method can also be applied to the structural studies of other large-scale organizations. PMID:26047331

ROSE Version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quinlan, D.; Yi, Q.; Buduc, R.

2005-02-17

ROSE is an object-oriented software infrastructure for source-to-source translation that provides an interface for programmers to write their own specialized translators for optimizing scientific applications. ROSE is a part of current research on telescoping languages, which provides optimizations of the use of libraries in scientific applications. ROSE defines approaches to extend the optimization techniques, common in well defined languages, to the optimization of scientific applications using well defined libraries. ROSE includes a rich set of tools for generating customized transformations to support optimization of applications codes. We currently support full C and C++ (including template instantiation etc.), with Fortran 90more » support under development as part of a collaboration and contract with Rice to use their version of the open source Open64 F90 front-end. ROSE represents an attempt to define an open compiler infrastructure to handle the full complexity of full scale DOE applications codes using the languages common to scientific computing within DOE. We expect that such an infrastructure will also be useful for the development of numerous tools that may then realistically expect to work on DOE full scale applications.« less

Open cyberGIS software for geospatial research and education in the big data era

NASA Astrophysics Data System (ADS)

Wang, Shaowen; Liu, Yan; Padmanabhan, Anand

CyberGIS represents an interdisciplinary field combining advanced cyberinfrastructure, geographic information science and systems (GIS), spatial analysis and modeling, and a number of geospatial domains to improve research productivity and enable scientific breakthroughs. It has emerged as new-generation GIS that enable unprecedented advances in data-driven knowledge discovery, visualization and visual analytics, and collaborative problem solving and decision-making. This paper describes three open software strategies-open access, source, and integration-to serve various research and education purposes of diverse geospatial communities. These strategies have been implemented in a leading-edge cyberGIS software environment through three corresponding software modalities: CyberGIS Gateway, Toolkit, and Middleware, and achieved broad and significant impacts.

CollaborationViz: Interactive Visual Exploration of Biomedical Research Collaboration Networks

PubMed Central

Bian, Jiang; Xie, Mengjun; Hudson, Teresa J.; Eswaran, Hari; Brochhausen, Mathias; Hanna, Josh; Hogan, William R.

2014-01-01

Social network analysis (SNA) helps us understand patterns of interaction between social entities. A number of SNA studies have shed light on the characteristics of research collaboration networks (RCNs). Especially, in the Clinical Translational Science Award (CTSA) community, SNA provides us a set of effective tools to quantitatively assess research collaborations and the impact of CTSA. However, descriptive network statistics are difficult for non-experts to understand. In this article, we present our experiences of building meaningful network visualizations to facilitate a series of visual analysis tasks. The basis of our design is multidimensional, visual aggregation of network dynamics. The resulting visualizations can help uncover hidden structures in the networks, elicit new observations of the network dynamics, compare different investigators and investigator groups, determine critical factors to the network evolution, and help direct further analyses. We applied our visualization techniques to explore the biomedical RCNs at the University of Arkansas for Medical Sciences – a CTSA institution. And, we created CollaborationViz, an open-source visual analytical tool to help network researchers and administration apprehend the network dynamics of research collaborations through interactive visualization. PMID:25405477

TOPSAN: a dynamic web database for structural genomics.

PubMed

Ellrott, Kyle; Zmasek, Christian M; Weekes, Dana; Sri Krishna, S; Bakolitsa, Constantina; Godzik, Adam; Wooley, John

2011-01-01

The Open Protein Structure Annotation Network (TOPSAN) is a web-based collaboration platform for exploring and annotating structures determined by structural genomics efforts. Characterization of those structures presents a challenge since the majority of the proteins themselves have not yet been characterized. Responding to this challenge, the TOPSAN platform facilitates collaborative annotation and investigation via a user-friendly web-based interface pre-populated with automatically generated information. Semantic web technologies expand and enrich TOPSAN's content through links to larger sets of related databases, and thus, enable data integration from disparate sources and data mining via conventional query languages. TOPSAN can be found at http://www.topsan.org.

Biopython: freely available Python tools for computational molecular biology and bioinformatics.

PubMed

Cock, Peter J A; Antao, Tiago; Chang, Jeffrey T; Chapman, Brad A; Cox, Cymon J; Dalke, Andrew; Friedberg, Iddo; Hamelryck, Thomas; Kauff, Frank; Wilczynski, Bartek; de Hoon, Michiel J L

2009-06-01

The Biopython project is a mature open source international collaboration of volunteer developers, providing Python libraries for a wide range of bioinformatics problems. Biopython includes modules for reading and writing different sequence file formats and multiple sequence alignments, dealing with 3D macro molecular structures, interacting with common tools such as BLAST, ClustalW and EMBOSS, accessing key online databases, as well as providing numerical methods for statistical learning. Biopython is freely available, with documentation and source code at (www.biopython.org) under the Biopython license.

Integration of data systems and technology improves research and collaboration for a superfund research center.

PubMed

Hobbie, Kevin A; Peterson, Elena S; Barton, Michael L; Waters, Katrina M; Anderson, Kim A

2012-08-01

Large collaborative centers are a common model for accomplishing integrated environmental health research. These centers often include various types of scientific domains (e.g., chemistry, biology, bioinformatics) that are integrated to solve some of the nation's key economic or public health concerns. The Superfund Research Center (SRP) at Oregon State University (OSU) is one such center established in 2008 to study the emerging health risks of polycyclic aromatic hydrocarbons while using new technologies both in the field and laboratory. With outside collaboration at remote institutions, success for the center as a whole depends on the ability to effectively integrate data across all research projects and support cores. Therefore, the OSU SRP center developed a system that integrates environmental monitoring data with analytical chemistry data and downstream bioinformatics and statistics to enable complete "source-to-outcome" data modeling and information management. This article describes the development of this integrated information management system that includes commercial software for operational laboratory management and sample management in addition to open-source custom-built software for bioinformatics and experimental data management.

Integration of Data Systems and Technology Improves Research and Collaboration for a Superfund Research Center

PubMed Central

Hobbie, Kevin A.; Peterson, Elena S.; Barton, Michael L.; Waters, Katrina M.; Anderson, Kim A.

2012-01-01

Large collaborative centers are a common model for accomplishing integrated environmental health research. These centers often include various types of scientific domains (e.g. chemistry, biology, bioinformatics) that are integrated to solve some of the nation’s key economic or public health concerns. The Superfund Research Center (SRP) at Oregon State University (OSU) is one such center established in 2008 to study the emerging health risks of polycyclic aromatic hydrocarbons while utilizing new technologies both in the field and laboratory. With outside collaboration at remote institutions, success for the center as a whole depends on the ability to effectively integrate data across all research projects and support cores. Therefore, the OSU SRP center developed a system that integrates environmental monitoring data with analytical chemistry data and downstream bioinformatics and statistics to enable complete ‘source to outcome’ data modeling and information management. This article describes the development of this integrated information management system that includes commercial software for operational laboratory management and sample management in addition to open source custom built software for bioinformatics and experimental data management. PMID:22651935

Tip Vortex and Wake Characteristics of a Counterrotating Open Rotor

NASA Technical Reports Server (NTRS)

VanZante, Dale E.; Wernet, Mark P.

2012-01-01

One of the primary noise sources for Open Rotor systems is the interaction of the forward rotor tip vortex and blade wake with the aft rotor. NASA has collaborated with General Electric on the testing of a new generation of low noise, counterrotating Open Rotor systems. Three-dimensional particle image velocimetry measurements were acquired in the intra-rotor gap of the Historical Baseline blade set. The velocity measurements are of sufficient resolution to characterize the tip vortex size and trajectory as well as the rotor wake decay and turbulence character. The tip clearance vortex trajectory is compared to results from previously developed models. Forward rotor wake velocity profiles are shown. Results are presented in a form as to assist numerical modeling of Open Rotor system aerodynamics and acoustics.

NASA World Wind: Infrastructure for Spatial Data

NASA Technical Reports Server (NTRS)

Hogan, Patrick

2011-01-01

The world has great need for analysis of Earth observation data, be it climate change, carbon monitoring, disaster response, national defense or simply local resource management. To best provide for spatial and time-dependent information analysis, the world benefits from an open standards and open source infrastructure for spatial data. In the spirit of NASA's motto "for the benefit of all" NASA invites the world community to collaboratively advance this core technology. The World Wind infrastructure for spatial data both unites and challenges the world for innovative solutions analyzing spatial data while also allowing absolute command and control over any respective information exchange medium.

Sustaining Open Source Communities through Hackathons - An Example from the ASPECT Community

NASA Astrophysics Data System (ADS)

Heister, T.; Hwang, L.; Bangerth, W.; Kellogg, L. H.

2016-12-01

The ecosystem surrounding a successful scientific open source software package combines both social and technical aspects. Much thought has been given to the technology side of writing sustainable software for large infrastructure projects and software libraries, but less about building the human capacity to perpetuate scientific software used in computational modeling. One effective format for building capacity is regular multi-day hackathons. Scientific hackathons bring together a group of science domain users and scientific software contributors to make progress on a specific software package. Innovation comes through the chance to work with established and new collaborations. Especially in the domain sciences with small communities, hackathons give geographically distributed scientists an opportunity to connect face-to-face. They foster lively discussions amongst scientists with different expertise, promote new collaborations, and increase transparency in both the technical and scientific aspects of code development. ASPECT is an open source, parallel, extensible finite element code to simulate thermal convection, that began development in 2011 under the Computational Infrastructure for Geodynamics. ASPECT hackathons for the past 3 years have grown the number of authors to >50, training new code maintainers in the process. Hackathons begin with leaders establishing project-specific conventions for development, demonstrating the workflow for code contributions, and reviewing relevant technical skills. Each hackathon expands the developer community. Over 20 scientists add >6,000 lines of code during the >1 week event. Participants grow comfortable contributing to the repository and over half continue to contribute afterwards. A high return rate of participants ensures continuity and stability of the group as well as mentoring for novice members. We hope to build other software communities on this model, but anticipate each to bring their own unique challenges.

An open source business model for malaria.

PubMed

Årdal, Christine; Røttingen, John-Arne

2015-01-01

Greater investment is required in developing new drugs and vaccines against malaria in order to eradicate malaria. These precious funds must be carefully managed to achieve the greatest impact. We evaluate existing efforts to discover and develop new drugs and vaccines for malaria to determine how best malaria R&D can benefit from an enhanced open source approach and how such a business model may operate. We assess research articles, patents, clinical trials and conducted a smaller survey among malaria researchers. Our results demonstrate that the public and philanthropic sectors are financing and performing the majority of malaria drug/vaccine discovery and development, but are then restricting access through patents, 'closed' publications and hidden away physical specimens. This makes little sense since it is also the public and philanthropic sector that purchases the drugs and vaccines. We recommend that a more "open source" approach is taken by making the entire value chain more efficient through greater transparency which may lead to more extensive collaborations. This can, for example, be achieved by empowering an existing organization like the Medicines for Malaria Venture (MMV) to act as a clearing house for malaria-related data. The malaria researchers that we surveyed indicated that they would utilize such registry data to increase collaboration. Finally, we question the utility of publicly or philanthropically funded patents for malaria medicines, where little to no profits are available. Malaria R&D benefits from a publicly and philanthropically funded architecture, which starts with academic research institutions, product development partnerships, commercialization assistance through UNITAID and finally procurement through mechanisms like The Global Fund to Fight AIDS, Tuberculosis and Malaria and the U.S.' President's Malaria Initiative. We believe that a fresh look should be taken at the cost/benefit of patents particularly related to new malaria medicines and consider alternative incentives, like WHO prequalification.

Pika: A snow science simulation tool built using the open-source framework MOOSE

NASA Astrophysics Data System (ADS)

Slaughter, A.; Johnson, M.

2017-12-01

The Department of Energy (DOE) is currently investing millions of dollars annually into various modeling and simulation tools for all aspects of nuclear energy. An important part of this effort includes developing applications based on the open-source Multiphysics Object Oriented Simulation Environment (MOOSE; mooseframework.org) from Idaho National Laboratory (INL).Thanks to the efforts of the DOE and outside collaborators, MOOSE currently contains a large set of physics modules, including phase-field, level set, heat conduction, tensor mechanics, Navier-Stokes, fracture and crack propagation (via the extended finite-element method), flow in porous media, and others. The heat conduction, tensor mechanics, and phase-field modules, in particular, are well-suited for snow science problems. Pika--an open-source MOOSE-based application--is capable of simulating both 3D, coupled nonlinear continuum heat transfer and large-deformation mechanics applications (such as settlement) and phase-field based micro-structure applications. Additionally, these types of problems may be coupled tightly in a single solve or across length and time scales using a loosely coupled Picard iteration approach. In addition to the wide range of physics capabilities, MOOSE-based applications also inherit an extensible testing framework, graphical user interface, and documentation system; tools that allow MOOSE and other applications to adhere to nuclear software quality standards. The snow science community can learn from the nuclear industry and harness the existing effort to build simulation tools that are open, modular, and share a common framework. In particular, MOOSE-based multiphysics solvers are inherently parallel, dimension agnostic, adaptive in time and space, fully coupled, and capable of interacting with other applications. The snow science community should build on existing tools to enable collaboration between researchers and practitioners throughout the world, and advance the state-of-the-art in line with other scientific research efforts.

Fall 2014 SEI Research Review Edge-Enabled Tactical Systems (EETS)

DTIC Science & Technology

2014-10-29

Effective communicate and reasoning despite connectivity issues • More generally, how to make programming distributed algorithms with extensible...distributed collaboration in VREP simulations for 5-12 quadcopters and ground robots • Open-source middleware and algorithms released to community...Integration into CMU Drone-RK quadcopter and Platypus autonomous boat platforms • Presentations at DARPA (CODE), AFRL C4I Workshop, and AFRL Eglin

The SCEC Broadband Platform: A Collaborative Open-Source Software Package for Strong Ground Motion Simulation and Validation

NASA Astrophysics Data System (ADS)

Silva, F.; Maechling, P. J.; Goulet, C. A.; Somerville, P.; Jordan, T. H.

2014-12-01

The Southern California Earthquake Center (SCEC) Broadband Platform is a collaborative software development project involving geoscientists, earthquake engineers, graduate students, and the SCEC Community Modeling Environment. The SCEC Broadband Platform (BBP) is open-source scientific software that can generate broadband (0-100Hz) ground motions for earthquakes, integrating complex scientific modules that implement rupture generation, low and high-frequency seismogram synthesis, non-linear site effects calculation, and visualization into a software system that supports easy on-demand computation of seismograms. The Broadband Platform operates in two primary modes: validation simulations and scenario simulations. In validation mode, the Platform runs earthquake rupture and wave propagation modeling software to calculate seismograms for a well-observed historical earthquake. Then, the BBP calculates a number of goodness of fit measurements that quantify how well the model-based broadband seismograms match the observed seismograms for a certain event. Based on these results, the Platform can be used to tune and validate different numerical modeling techniques. In scenario mode, the Broadband Platform can run simulations for hypothetical (scenario) earthquakes. In this mode, users input an earthquake description, a list of station names and locations, and a 1D velocity model for their region of interest, and the Broadband Platform software then calculates ground motions for the specified stations. Working in close collaboration with scientists and research engineers, the SCEC software development group continues to add new capabilities to the Broadband Platform and to release new versions as open-source scientific software distributions that can be compiled and run on many Linux computer systems. Our latest release includes 5 simulation methods, 7 simulation regions covering California, Japan, and Eastern North America, the ability to compare simulation results against GMPEs, and several new data products, such as map and distance-based goodness of fit plots. As the number and complexity of scenarios simulated using the Broadband Platform increases, we have added batching utilities to substantially improve support for running large-scale simulations on computing clusters.

Closing gaps between open software and public data in a hackathon setting: User-centered software prototyping.

PubMed

Busby, Ben; Lesko, Matthew; Federer, Lisa

2016-01-01

In genomics, bioinformatics and other areas of data science, gaps exist between extant public datasets and the open-source software tools built by the community to analyze similar data types.  The purpose of biological data science hackathons is to assemble groups of genomics or bioinformatics professionals and software developers to rapidly prototype software to address these gaps.  The only two rules for the NCBI-assisted hackathons run so far are that 1) data either must be housed in public data repositories or be deposited to such repositories shortly after the hackathon's conclusion, and 2) all software comprising the final pipeline must be open-source or open-use.  Proposed topics, as well as suggested tools and approaches, are distributed to participants at the beginning of each hackathon and refined during the event.  Software, scripts, and pipelines are developed and published on GitHub, a web service providing publicly available, free-usage tiers for collaborative software development. The code resulting from each hackathon is published at https://github.com/NCBI-Hackathons/ with separate directories or repositories for each team.

Optimal response to attacks on the open science grids.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Altunay, M.; Leyffer, S.; Linderoth, J. T.

2011-01-01

Cybersecurity is a growing concern, especially in open grids, where attack propagation is easy because of prevalent collaborations among thousands of users and hundreds of institutions. The collaboration rules that typically govern large science experiments as well as social networks of scientists span across the institutional security boundaries. A common concern is that the increased openness may allow malicious attackers to spread more readily around the grid. We consider how to optimally respond to attacks in open grid environments. To show how and why attacks spread more readily around the grid, we first discuss how collaborations manifest themselves in themore » grids and form the collaboration network graph, and how this collaboration network graph affects the security threat levels of grid participants. We present two mixed-integer program (MIP) models to find the optimal response to attacks in open grid environments, and also calculate the threat level associated with each grid participant. Given an attack scenario, our optimal response model aims to minimize the threat levels at unaffected participants while maximizing the uninterrupted scientific production (continuing collaborations). By adopting some of the collaboration rules (e.g., suspending a collaboration or shutting down a site), the model finds optimal response to subvert an attack scenario.« less

Open innovation for phenotypic drug discovery: The PD2 assay panel.

PubMed

Lee, Jonathan A; Chu, Shaoyou; Willard, Francis S; Cox, Karen L; Sells Galvin, Rachelle J; Peery, Robert B; Oliver, Sarah E; Oler, Jennifer; Meredith, Tamika D; Heidler, Steven A; Gough, Wendy H; Husain, Saba; Palkowitz, Alan D; Moxham, Christopher M

2011-07-01

Phenotypic lead generation strategies seek to identify compounds that modulate complex, physiologically relevant systems, an approach that is complementary to traditional, target-directed strategies. Unlike gene-specific assays, phenotypic assays interrogate multiple molecular targets and signaling pathways in a target "agnostic" fashion, which may reveal novel functions for well-studied proteins and discover new pathways of therapeutic value. Significantly, existing compound libraries may not have sufficient chemical diversity to fully leverage a phenotypic strategy. To address this issue, Eli Lilly and Company launched the Phenotypic Drug Discovery Initiative (PD(2)), a model of open innovation whereby external research groups can submit compounds for testing in a panel of Lilly phenotypic assays. This communication describes the statistical validation, operations, and initial screening results from the first PD(2) assay panel. Analysis of PD(2) submissions indicates that chemical diversity from open source collaborations complements internal sources. Screening results for the first 4691 compounds submitted to PD(2) have confirmed hit rates from 1.6% to 10%, with the majority of active compounds exhibiting acceptable potency and selectivity. Phenotypic lead generation strategies, in conjunction with novel chemical diversity obtained via open-source initiatives such as PD(2), may provide a means to identify compounds that modulate biology by novel mechanisms and expand the innovation potential of drug discovery.

Open innovation and external sources of innovation. An opportunity to fuel the R&D pipeline and enhance decision making?

PubMed

Schuhmacher, Alexander; Gassmann, Oliver; McCracken, Nigel; Hinder, Markus

2018-05-08

Historically, research and development (R&D) in the pharmaceutical sector has predominantly been an in-house activity. To enable investments for game changing late-stage assets and to enable better and less costly go/no-go decisions, most companies have employed a fail early paradigm through the implementation of clinical proof-of-concept organizations. To fuel their pipelines, some pioneers started to complement their internal R&D efforts through collaborations as early as the 1990s. In recent years, multiple extrinsic and intrinsic factors induced an opening for external sources of innovation and resulted in new models for open innovation, such as open sourcing, crowdsourcing, public-private partnerships, innovations centres, and the virtualization of R&D. Three factors seem to determine the breadth and depth regarding how companies approach external innovation: (1) the company's legacy, (2) the company's willingness and ability to take risks and (3) the company's need to control IP and competitors. In addition, these factors often constitute the major hurdles to effectively leveraging external opportunities and assets. Conscious and differential choices of the R&D and business models for different companies and different divisions in the same company seem to best allow a company to fully exploit the potential of both internal and external innovations.

Open-source algorithm for detecting sea ice surface features in high-resolution optical imagery

NASA Astrophysics Data System (ADS)

Wright, Nicholas C.; Polashenski, Chris M.

2018-04-01

Snow, ice, and melt ponds cover the surface of the Arctic Ocean in fractions that change throughout the seasons. These surfaces control albedo and exert tremendous influence over the energy balance in the Arctic. Increasingly available meter- to decimeter-scale resolution optical imagery captures the evolution of the ice and ocean surface state visually, but methods for quantifying coverage of key surface types from raw imagery are not yet well established. Here we present an open-source system designed to provide a standardized, automated, and reproducible technique for processing optical imagery of sea ice. The method classifies surface coverage into three main categories: snow and bare ice, melt ponds and submerged ice, and open water. The method is demonstrated on imagery from four sensor platforms and on imagery spanning from spring thaw to fall freeze-up. Tests show the classification accuracy of this method typically exceeds 96 %. To facilitate scientific use, we evaluate the minimum observation area required for reporting a representative sample of surface coverage. We provide an open-source distribution of this algorithm and associated training datasets and suggest the community consider this a step towards standardizing optical sea ice imagery processing. We hope to encourage future collaborative efforts to improve the code base and to analyze large datasets of optical sea ice imagery.

OOSTethys - Open Source Software for the Global Earth Observing Systems of Systems

NASA Astrophysics Data System (ADS)

Bridger, E.; Bermudez, L. E.; Maskey, M.; Rueda, C.; Babin, B. L.; Blair, R.

2009-12-01

An open source software project is much more than just picking the right license, hosting modular code and providing effective documentation. Success in advancing in an open collaborative way requires that the process match the expected code functionality to the developer's personal expertise and organizational needs as well as having an enthusiastic and responsive core lead group. We will present the lessons learned fromOOSTethys , which is a community of software developers and marine scientists who develop open source tools, in multiple languages, to integrate ocean observing systems into an Integrated Ocean Observing System (IOOS). OOSTethys' goal is to dramatically reduce the time it takes to install, adopt and update standards-compliant web services. OOSTethys has developed servers, clients and a registry. Open source PERL, PYTHON, JAVA and ASP tool kits and reference implementations are helping the marine community publish near real-time observation data in interoperable standard formats. In some cases publishing an OpenGeospatial Consortium (OGC), Sensor Observation Service (SOS) from NetCDF files or a database or even CSV text files could take only minutes depending on the skills of the developer. OOSTethys is also developing an OGC standard registry, Catalog Service for Web (CSW). This open source CSW registry was implemented to easily register and discover SOSs using ISO 19139 service metadata. A web interface layer over the CSW registry simplifies the registration process by harvesting metadata describing the observations and sensors from the “GetCapabilities” response of SOS. OPENIOOS is the web client, developed in PERL to visualize the sensors in the SOS services. While the number of OOSTethys software developers is small, currently about 10 around the world, the number of OOSTethys toolkit implementers is larger and growing and the ease of use has played a large role in spreading the use of interoperable standards compliant web services widely in the marine community.

Heterogeneous compute in computer vision: OpenCL in OpenCV

NASA Astrophysics Data System (ADS)

Gasparakis, Harris

2014-02-01

We explore the relevance of Heterogeneous System Architecture (HSA) in Computer Vision, both as a long term vision, and as a near term emerging reality via the recently ratified OpenCL 2.0 Khronos standard. After a brief review of OpenCL 1.2 and 2.0, including HSA features such as Shared Virtual Memory (SVM) and platform atomics, we identify what genres of Computer Vision workloads stand to benefit by leveraging those features, and we suggest a new mental framework that replaces GPU compute with hybrid HSA APU compute. As a case in point, we discuss, in some detail, popular object recognition algorithms (part-based models), emphasizing the interplay and concurrent collaboration between the GPU and CPU. We conclude by describing how OpenCL has been incorporated in OpenCV, a popular open source computer vision library, emphasizing recent work on the Transparent API, to appear in OpenCV 3.0, which unifies the native CPU and OpenCL execution paths under a single API, allowing the same code to execute either on CPU or on a OpenCL enabled device, without even recompiling.

The Virtual Collaboration Environment: New Media for Crisis Response

DTIC Science & Technology

2011-05-01

openvce.net/forum-alternative-platforms and http://openvce.net/more), the open-source Drupal ®-based Proceedings of the 8th International ISCRAM... Drupal is a widely used modular content management system, with an active development community of its own. It provides a user management system and...authoring text documents (a facility felt to be lacking at the time in Drupal ). This wiki feature has itself been supplemented with experimental

Design of the Familial Hypercholesterolaemia Australasia Network Registry: Creating Opportunities for Greater International Collaboration.

PubMed

Bellgard, Matthew I; Walker, Caroline E; Napier, Kathryn R; Lamont, Leanne; Hunter, Adam A; Render, Lee; Radochonski, Maciej; Pang, Jing; Pedrotti, Annette; Sullivan, David R; Kostner, Karam; Bishop, Warrick; George, Peter M; O'Brien, Richard C; Clifton, Peter M; Bockxmeer, Frank M Van; Nicholls, Stephen J; Hamilton-Craig, Ian; Dawkins, Hugh Js; Watts, Gerald F

2017-10-01

Familial Hypercholesterolemia (FH) is the most common and serious monogenic disorder of lipoprotein metabolism that leads to premature coronary heart disease. There are over 65,000 people estimated to have FH in Australia, but many remain undiagnosed. Patients with FH are often under-treated, but with early detection, cascade family testing and adequate treatment, patient outcomes can improve. Patient registries are key tools for providing new information on FH and enhancing care worldwide. The development and design of the FH Australasia Network Registry is a crucial component in the comprehensive model of care for FH, which aims to provide a standardized, high-quality and cost-effective system of care that is likely to have the highest impact on patient outcomes. Informed by stakeholder engagement, the FH Australasia Network Registry was collaboratively developed by government, patient and clinical networks and research groups. The open-source, web-based Rare Disease Registry Framework was the architecture chosen for this registry owing to its open-source standards, modular design, interoperability, scalability and security features; all these are key components required to meet the ever changing clinical demands across regions. This paper provides a high level blueprint for other countries and jurisdictions to help inform and map out the critical features of an FH registry to meet their particular health system needs.

CILogon: An Integrated Identity and Access Management Platform for Science

NASA Astrophysics Data System (ADS)

Basney, J.

2016-12-01

When scientists work together, they use web sites and other software to share their ideas and data. To ensure the integrity of their work, these systems require the scientists to log in and verify that they are part of the team working on a particular science problem. Too often, the identity and access verification process is a stumbling block for the scientists. Scientific research projects are forced to invest time and effort into developing and supporting Identity and Access Management (IAM) services, distracting them from the core goals of their research collaboration. CILogon provides an IAM platform that enables scientists to work together to meet their IAM needs more effectively so they can allocate more time and effort to their core mission of scientific research. The CILogon platform enables federated identity management and collaborative organization management. Federated identity management enables researchers to use their home organization identities to access cyberinfrastructure, rather than requiring yet another username and password to log on. Collaborative organization management enables research projects to define user groups for authorization to collaboration platforms (e.g., wikis, mailing lists, and domain applications). CILogon's IAM platform serves the unique needs of research collaborations, namely the need to dynamically form collaboration groups across organizations and countries, sharing access to data, instruments, compute clusters, and other resources to enable scientific discovery. CILogon provides a software-as-a-service platform to ease integration with cyberinfrastructure, while making all software components publicly available under open source licenses to enable re-use. Figure 1 illustrates the components and interfaces of this platform. CILogon has been operational since 2010 and has been used by over 7,000 researchers from more than 170 identity providers to access cyberinfrastructure including Globus, LIGO, Open Science Grid, SeedMe, and XSEDE. The "CILogon 2.0" platform, launched in 2016, adds support for virtual organization (VO) membership management, identity linking, international collaborations, and standard integration protocols, through integration with the Internet2 COmanage collaboration software.

OnEarth: An Open Source Solution for Efficiently Serving High-Resolution Mapped Image Products

NASA Astrophysics Data System (ADS)

Thompson, C. K.; Plesea, L.; Hall, J. R.; Roberts, J. T.; Cechini, M. F.; Schmaltz, J. E.; Alarcon, C.; Huang, T.; McGann, J. M.; Chang, G.; Boller, R. A.; Ilavajhala, S.; Murphy, K. J.; Bingham, A. W.

2013-12-01

This presentation introduces OnEarth, a server side software package originally developed at the Jet Propulsion Laboratory (JPL), that facilitates network-based, minimum-latency geolocated image access independent of image size or spatial resolution. The key component in this package is the Meta Raster Format (MRF), a specialized raster file extension to the Geospatial Data Abstraction Library (GDAL) consisting of an internal indexed pyramid of image tiles. Imagery to be served is converted to the MRF format and made accessible online via an expandable set of server modules handling requests in several common protocols, including the Open Geospatial Consortium (OGC) compliant Web Map Tile Service (WMTS) as well as Tiled WMS and Keyhole Markup Language (KML). OnEarth has recently transitioned to open source status and is maintained and actively developed as part of GIBS (Global Imagery Browse Services), a collaborative project between JPL and Goddard Space Flight Center (GSFC). The primary function of GIBS is to enhance and streamline the data discovery process and to support near real-time (NRT) applications via the expeditious ingestion and serving of full-resolution imagery representing science products from across the NASA Earth Science spectrum. Open source software solutions are leveraged where possible in order to utilize existing available technologies, reduce development time, and enlist wider community participation. We will discuss some of the factors and decision points in transitioning OnEarth to a suitable open source paradigm, including repository and licensing agreement decision points, institutional hurdles, and perceived benefits. We will also provide examples illustrating how OnEarth is integrated within GIBS and other applications.

University - industry collaborations: models, drivers and cultures.

PubMed

Ehrismann, Dominic; Patel, Dhavalkumar

2015-01-01

The way academic institutions and pharmaceutical companies have been approaching collaborations has changed significantly in recent years. A multitude of interaction models were tested and critical factors that drive successful collaborations have been proposed. Based on this experience the current consensus in the pharmaceutical industry is to pursue one of two strategies: an open innovation approach to source discoveries wherever they occur, or investing selectively into scientific partnerships that churn out inventions that can be translated from bench to bedside internally. While these strategies may be intuitive, to form and build sustainable relationships between academia and large multinational healthcare enterprises is proving challenging. In this article we explore some of the more testing aspects of these collaborations, approaches that various industrial players have taken and provide our own views on the matter. We found that understanding and respecting each other's organisational culture and combining the intellectual and technological assets to answer big scientific questions accelerates and improves the quality of every collaboration. Upon discussing the prevailing cooperation models in the university - industry domain, we assert that science-driven collaborations where risks and rewards are shared equally without a commercial agenda in mind are the most impactful.

Damage Detection and Mitigation in Open Collaboration Applications

ERIC Educational Resources Information Center

West, Andrew G.

2013-01-01

Collaborative functionality is changing the way information is amassed, refined, and disseminated in online environments. A subclass of these systems characterized by "open collaboration" uniquely allow participants to "modify" content with low barriers-to-entry. A prominent example and our case study, English Wikipedia,…

Terabytes to Megabytes: Data Reduction Onsite for Remote Limited Bandwidth Systems

NASA Astrophysics Data System (ADS)

Hirsch, M.

2016-12-01

Inexpensive, battery-powerable embedded computer systems such as the Intel Edison and Raspberry Pi have inspired makers of all ages to create and deploy sensor systems. Geoscientists are also leveraging such inexpensive embedded computers for solar-powered or other low-resource utilization systems for ionospheric observation. We have developed OpenCV-based machine vision algorithms to reduce terabytes per night of high-speed aurora video data down to megabytes of data to aid in automated sifting and retention of high-value data from the mountains of less interesting data. Given prohibitively expensive data connections in many parts of the world, such techniques may be generalizable to more than just the auroral video and passive FM radar implemented so far. After the automated algorithm decides which data to keep, automated upload and distribution techniques are relevant to avoid excessive delay and consumption of researcher time. Open-source collaborative software development enables data audiences from experts through citizen enthusiasts to access the data and make exciting plots. Open software and data aids in cross-disciplinary collaboration opportunities, STEM outreach and increasing public awareness of the contributions each geoscience data collection system makes.

A collaborative resource management workspace and project management application for data collection, analysis and visualization: OpenNRM

NASA Astrophysics Data System (ADS)

Osti, A.

2013-12-01

During the process of research and design for OpenNRM, we imagined a place where diverse groups of people and communities could effectively and efficiently collaborate to manage large-scale environmental problems and projects. Our research revealed the need to combine a variety of software components. Users can explore and analyze a topic while simultaneously develop stories and solve problems in a way that the end result is consumable by their colleagues and the general public. To do this we brought together software modules that are typically separate: Document and Asset Management, GIS and Interactive Mapping, WIKI and Information Libraries, Data Catalogs and Services, Project Management Tools and Storytelling templates. These components, along with others are supported by extensive data catalogs (NWIS, Storet, CDEC, Cuahsi), data analysis tools and web services for a turn-key workspace that will allow you to quickly build project communities and data stories. In this presentation we will show you how our investigation into these collaborative efforts are implemented and working for some of our clients, including the State of California's Sacramento San Joaquin Bay-Delta and San Joaquin River Basin. The case study will display the use of the OpenNRM workspace for real time environmental conditions management, data visualization, project operations, environmental restoration, high frequency monitoring and data reporting. We will demonstrate how scientists and policy makers are working together to tell the story of this complicated and divisive system and how they are becoming better managers of that system. Using the genius of web services, we will show you how OpenNRM was designed to allow you to build your own community while easily sharing data stories, project data, monitoring results, document libraries, interactive maps and datasets with others. We will get into more technical detail by presenting how our data interpolation tools can show high frequency monitoring trends using the NWIS data network and other Cuahsi services and how you can save those results to make your projects operate in real time. Lastly, we will talk about the OpenNRM project and it's future in the open source community and as a general tool for collaborative multi-disciplinary research. You can learn more about us at www.34north.com . OpenNRM is currently implemented as a collaborative scientific research platform and project management community workspace for the Sacramento San Joaquin Bay Delta. Participants include: The Environmental protection Agency, California Department of Fish and Wildlife, State Water Resources Control Board, California Department of Water Resource, more than 10 Water Districts and USGS.

A suite of R packages for web-enabled modeling and analysis of surface waters

NASA Astrophysics Data System (ADS)

Read, J. S.; Winslow, L. A.; Nüst, D.; De Cicco, L.; Walker, J. I.

2014-12-01

Researchers often create redundant methods for downloading, manipulating, and analyzing data from online resources. Moreover, the reproducibility of science can be hampered by complicated and voluminous data, lack of time for documentation and long-term maintenance of software, and fear of exposing programming skills. The combination of these factors can encourage unshared one-off programmatic solutions instead of openly provided reusable methods. Federal and academic researchers in the water resources and informatics domains have collaborated to address these issues. The result of this collaboration is a suite of modular R packages that can be used independently or as elements in reproducible analytical workflows. These documented and freely available R packages were designed to fill basic needs for the effective use of water data: the retrieval of time-series and spatial data from web resources (dataRetrieval, geoknife), performing quality assurance and quality control checks of these data with robust statistical methods (sensorQC), the creation of useful data derivatives (including physically- and biologically-relevant indices; GDopp, LakeMetabolizer), and the execution and evaluation of models (glmtools, rLakeAnalyzer). Here, we share details and recommendations for the collaborative coding process, and highlight the benefits of an open-source tool development pattern with a popular programming language in the water resources discipline (such as R). We provide examples of reproducible science driven by large volumes of web-available data using these tools, explore benefits of accessing packages as standardized web processing services (WPS) and present a working platform that allows domain experts to publish scientific algorithms in a service-oriented architecture (WPS4R). We assert that in the era of open data, tools that leverage these data should also be freely shared, transparent, and developed in an open innovation environment.

A Fault-Oblivious Extreme-Scale Execution Environment (FOX)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Hensbergen, Eric; Speight, William; Xenidis, Jimi

IBM Research’s contribution to the Fault Oblivious Extreme-scale Execution Environment (FOX) revolved around three core research deliverables: • collaboration with Boston University around the Kittyhawk cloud infrastructure which both enabled a development and deployment platform for the project team and provided a fault-injection testbed to evaluate prototypes • operating systems research focused on exploring role-based operating system technologies through collaboration with Sandia National Labs on the NIX research operating system and collaboration with the broader IBM Research community around a hybrid operating system model which became known as FusedOS • IBM Research also participated in an advisory capacity with themore » Boston University SESA project, the core of which was derived from the K42 operating system research project funded in part by DARPA’s HPCS program. Both of these contributions were built on a foundation of previous operating systems research funding by the Department of Energy’s FastOS Program. Through the course of the X-stack funding we were able to develop prototypes, deploy them on production clusters at scale, and make them available to other researchers. As newer hardware, in the form of BlueGene/Q, came online, we were able to port the prototypes to the new hardware and release the source code for the resulting prototypes as open source to the community. In addition to the open source coded for the Kittyhawk and NIX prototypes, we were able to bring the BlueGene/Q Linux patches up to a more recent kernel and contribute them for inclusion by the broader Linux community. The lasting impact of the IBM Research work on FOX can be seen in its effect on the shift of IBM’s approach to HPC operating systems from Linux and Compute Node Kernels to role-based approaches as prototyped by the NIX and FusedOS work. This impact can be seen beyond IBM in follow-on ideas being incorporated into the proposals for the Exasacale Operating Systems/Runtime program.« less

Data harmonization and federated analysis of population-based studies: the BioSHaRE project

PubMed Central

2013-01-01

Abstracts Background Individual-level data pooling of large population-based studies across research centres in international research projects faces many hurdles. The BioSHaRE (Biobank Standardisation and Harmonisation for Research Excellence in the European Union) project aims to address these issues by building a collaborative group of investigators and developing tools for data harmonization, database integration and federated data analyses. Methods Eight population-based studies in six European countries were recruited to participate in the BioSHaRE project. Through workshops, teleconferences and electronic communications, participating investigators identified a set of 96 variables targeted for harmonization to answer research questions of interest. Using each study’s questionnaires, standard operating procedures, and data dictionaries, harmonization potential was assessed. Whenever harmonization was deemed possible, processing algorithms were developed and implemented in an open-source software infrastructure to transform study-specific data into the target (i.e. harmonized) format. Harmonized datasets located on server in each research centres across Europe were interconnected through a federated database system to perform statistical analysis. Results Retrospective harmonization led to the generation of common format variables for 73% of matches considered (96 targeted variables across 8 studies). Authenticated investigators can now perform complex statistical analyses of harmonized datasets stored on distributed servers without actually sharing individual-level data using the DataSHIELD method. Conclusion New Internet-based networking technologies and database management systems are providing the means to support collaborative, multi-center research in an efficient and secure manner. The results from this pilot project show that, given a strong collaborative relationship between participating studies, it is possible to seamlessly co-analyse internationally harmonized research databases while allowing each study to retain full control over individual-level data. We encourage additional collaborative research networks in epidemiology, public health, and the social sciences to make use of the open source tools presented herein. PMID:24257327

Apache Open Climate Workbench: Building Open Source Climate Science Tools and Community at the Apache Software Foundation

NASA Astrophysics Data System (ADS)

Joyce, M.; Ramirez, P.; Boustani, M.; Mattmann, C. A.; Khudikyan, S.; McGibbney, L. J.; Whitehall, K. D.

2014-12-01

Apache Open Climate Workbench (OCW; https://climate.apache.org/) is a Top-Level Project at the Apache Software Foundation that aims to provide a suite of tools for performing climate science evaluations using model outputs from a multitude of different sources (ESGF, CORDEX, U.S. NCA, NARCCAP) with remote sensing data from NASA, NOAA, and other agencies. Apache OCW is the second NASA project to become a Top-Level Project at the Apache Software Foundation. It grew out of the Jet Propulsion Laboratory's (JPL) Regional Climate Model Evaluation System (RCMES) project, a collaboration between JPL and the University of California, Los Angeles' Joint Institute for Regional Earth System Science and Engineering (JIFRESSE). Apache OCW provides scientists and developers with tools for data manipulation, metrics for dataset comparisons, and a visualization suite. In addition to a powerful low-level API, Apache OCW also supports a web application for quick, browser-controlled evaluations, a command line application for local evaluations, and a virtual machine for isolated experimentation with minimal setup. This talk will look at the difficulties and successes of moving a closed community research project out into the wild world of open source. We'll explore the growing pains Apache OCW went through to become a Top-Level Project at the Apache Software Foundation as well as the benefits gained by opening up development to the broader climate and computer science communities.

Open source and healthcare in Europe - time to put leading edge ideas into practice.

PubMed

Murray, Peter J; Wright, Graham; Karopka, Thomas; Betts, Helen; Orel, Andrej

2009-01-01

Free/Libre and Open Source Software (FLOSS) is a process of software development, a method of licensing and a philosophy. Although FLOSS plays a significant role in several market areas, the impact in the health care arena is still limited. FLOSS is promoted as one of the most effective means for overcoming fragmentation in the health care sector and providing a basis for more efficient, timely and cost effective health care provision. The 2008 European Federation for Medical Informatics (EFMI) Special Topic Conference (STC) explored a range of current and future issues related to FLOSS in healthcare (FLOSS-HC). In particular, there was a focus on health records, ubiquitous computing, knowledge sharing, and current and future applications. Discussions resulted in a list of main barriers and challenges for use of FLOSS-HC. Based on the outputs of this event, the 2004 Open Steps events and subsequent workshops at OSEHC2009 and Med-e-Tel 2009, a four-step strategy has been proposed for FLOSS-HC: 1) a FLOSS-HC inventory; 2) a FLOSS-HC collaboration platform, use case database and knowledge base; 3) a worldwide FLOSS-HC network; and 4) FLOSS-HC dissemination activities. The workshop will further refine this strategy and elaborate avenues for FLOSS-HC from scientific, business and end-user perspectives. To gain acceptance by different stakeholders in the health care industry, different activities have to be conducted in collaboration. The workshop will focus on the scientific challenges in developing methodologies and criteria to support FLOSS-HC in becoming a viable alternative to commercial and proprietary software development and deployment.

Closing gaps between open software and public data in a hackathon setting: User-centered software prototyping

PubMed Central

Busby, Ben; Lesko, Matthew; Federer, Lisa

2016-01-01

In genomics, bioinformatics and other areas of data science, gaps exist between extant public datasets and the open-source software tools built by the community to analyze similar data types.  The purpose of biological data science hackathons is to assemble groups of genomics or bioinformatics professionals and software developers to rapidly prototype software to address these gaps.  The only two rules for the NCBI-assisted hackathons run so far are that 1) data either must be housed in public data repositories or be deposited to such repositories shortly after the hackathon’s conclusion, and 2) all software comprising the final pipeline must be open-source or open-use.  Proposed topics, as well as suggested tools and approaches, are distributed to participants at the beginning of each hackathon and refined during the event.  Software, scripts, and pipelines are developed and published on GitHub, a web service providing publicly available, free-usage tiers for collaborative software development. The code resulting from each hackathon is published at https://github.com/NCBI-Hackathons/ with separate directories or repositories for each team. PMID:27134733

Profugus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, Thomas; Hamilton, Steven; Slattery, Stuart

Profugus is an open-source mini-application (mini-app) for radiation transport and reactor applications. It contains the fundamental computational kernels used in the Exnihilo code suite from Oak Ridge National Laboratory. However, Exnihilo is production code with a substantial user base. Furthermore, Exnihilo is export controlled. This makes collaboration with computer scientists and computer engineers difficult. Profugus is designed to bridge that gap. By encapsulating the core numerical algorithms in an abbreviated code base that is open-source, computer scientists can analyze the algorithms and easily make code-architectural changes to test performance without compromising the production code values of Exnihilo. Profugus is notmore » meant to be production software with respect to problem analysis. The computational kernels in Profugus are designed to analyze performance, not correctness. Nonetheless, users of Profugus can setup and run problems with enough real-world features to be useful as proof-of-concept for actual production work.« less

CONNJUR Workflow Builder: A software integration environment for spectral reconstruction

PubMed Central

Fenwick, Matthew; Weatherby, Gerard; Vyas, Jay; Sesanker, Colbert; Martyn, Timothy O.; Ellis, Heidi J.C.; Gryk, Michael R.

2015-01-01

CONNJUR Workflow Builder (WB) is an open-source software integration environment that leverages existing spectral reconstruction tools to create a synergistic, coherent platform for converting biomolecular NMR data from the time domain to the frequency domain. WB provides data integration of primary data and metadata using a relational database, and includes a library of pre-built workflows for processing time domain data. WB simplifies maximum entropy reconstruction, facilitating the processing of non-uniformly sampled time domain data. As will be shown in the paper, the unique features of WB provide it with novel abilities to enhance the quality, accuracy, and fidelity of the spectral reconstruction process. WB also provides features which promote collaboration, education, parameterization, and non-uniform data sets along with processing integrated with the Rowland NMR Toolkit (RNMRTK) and NMRPipe software packages. WB is available free of charge in perpetuity, dual-licensed under the MIT and GPL open source licenses. PMID:26066803

CONNJUR Workflow Builder: a software integration environment for spectral reconstruction.

PubMed

Fenwick, Matthew; Weatherby, Gerard; Vyas, Jay; Sesanker, Colbert; Martyn, Timothy O; Ellis, Heidi J C; Gryk, Michael R

2015-07-01

CONNJUR Workflow Builder (WB) is an open-source software integration environment that leverages existing spectral reconstruction tools to create a synergistic, coherent platform for converting biomolecular NMR data from the time domain to the frequency domain. WB provides data integration of primary data and metadata using a relational database, and includes a library of pre-built workflows for processing time domain data. WB simplifies maximum entropy reconstruction, facilitating the processing of non-uniformly sampled time domain data. As will be shown in the paper, the unique features of WB provide it with novel abilities to enhance the quality, accuracy, and fidelity of the spectral reconstruction process. WB also provides features which promote collaboration, education, parameterization, and non-uniform data sets along with processing integrated with the Rowland NMR Toolkit (RNMRTK) and NMRPipe software packages. WB is available free of charge in perpetuity, dual-licensed under the MIT and GPL open source licenses.

Copyright and Collaborative Spaces: Open Licensing and Wikis

ERIC Educational Resources Information Center

Botterbusch, Hope R.; Parker, Preston

2008-01-01

As recently as ten years ago, it may have seemed like science fiction to imagine collaborative spaces on the Internet. Today, collaborative websites have proliferated: (1) blogs; (2) social networking; (3) image sharing; (4) video sharing; (5) open educational resources; and (6) popularity websites. Another type is called a wiki, an online…

Toward Global Real Time Hydrologic Modeling - An "Open" View From the Trenches

NASA Astrophysics Data System (ADS)

Nelson, J.

2015-12-01

Big Data has become a popular term to describe the exponential growth of data and related cyber infrastructure to process it so that better analysis can be performed and lead to improved decision-making. How are we doing in the hydrologic sciences? As part of a significant collaborative effort that brought together scientists from public, private, and academic organizations a new transformative hydrologic forecasting modeling infrastructure has been developed. How was it possible to go from deterministic hydrologic forecasts largely driven through manual interactions at 3600 stations to automated 15-day ensemble forecasts at 2.67 million stations? Earth observations of precipitation, temperature, moisture, and other atmospheric and land surface conditions form the foundation of global hydrologic forecasts, but this project demonstrates a critical component to harness these resources can be summed up in one word: OPEN. Whether it is open data sources, open software solutions with open standards, or just being open to collaborations and building teams across institutions, disciplines, and international boundaries, time and time again through my involvement in the development of a high-resolution real time global hydrologic forecasting model I have discovered that in every aspect the sum has always been greater than the parts. While much has been accomplished, much more remains to be done, but the most important lesson learned has been to the degree that we can remain open and work together, the greater our ability will be to use big data hydrologic modeling resources to solve the world's most vexing water related challenges. This presentation will demonstrate a transformational global real time hydrologic forecasting application based on downscaled ECMWF ensemble forecasts, RAPID routing, and Tethys Platform for cloud computing and visualization with discussions of the human and cyber infrastructure connections that make it successful and needs moving forward.

An i2b2-based, generalizable, open source, self-scaling chronic disease registry

PubMed Central

Quan, Justin; Ortiz, David M; Bousvaros, Athos; Ilowite, Norman T; Inman, Christi J; Marsolo, Keith; McMurry, Andrew J; Sandborg, Christy I; Schanberg, Laura E; Wallace, Carol A; Warren, Robert W; Weber, Griffin M; Mandl, Kenneth D

2013-01-01

Objective Registries are a well-established mechanism for obtaining high quality, disease-specific data, but are often highly project-specific in their design, implementation, and policies for data use. In contrast to the conventional model of centralized data contribution, warehousing, and control, we design a self-scaling registry technology for collaborative data sharing, based upon the widely adopted Integrating Biology & the Bedside (i2b2) data warehousing framework and the Shared Health Research Information Network (SHRINE) peer-to-peer networking software. Materials and methods Focusing our design around creation of a scalable solution for collaboration within multi-site disease registries, we leverage the i2b2 and SHRINE open source software to create a modular, ontology-based, federated infrastructure that provides research investigators full ownership and access to their contributed data while supporting permissioned yet robust data sharing. We accomplish these objectives via web services supporting peer-group overlays, group-aware data aggregation, and administrative functions. Results The 56-site Childhood Arthritis & Rheumatology Research Alliance (CARRA) Registry and 3-site Harvard Inflammatory Bowel Diseases Longitudinal Data Repository now utilize i2b2 self-scaling registry technology (i2b2-SSR). This platform, extensible to federation of multiple projects within and between research networks, encompasses >6000 subjects at sites throughout the USA. Discussion We utilize the i2b2-SSR platform to minimize technical barriers to collaboration while enabling fine-grained control over data sharing. Conclusions The implementation of i2b2-SSR for the multi-site, multi-stakeholder CARRA Registry has established a digital infrastructure for community-driven research data sharing in pediatric rheumatology in the USA. We envision i2b2-SSR as a scalable, reusable solution facilitating interdisciplinary research across diseases. PMID:22733975

An i2b2-based, generalizable, open source, self-scaling chronic disease registry.

PubMed

Natter, Marc D; Quan, Justin; Ortiz, David M; Bousvaros, Athos; Ilowite, Norman T; Inman, Christi J; Marsolo, Keith; McMurry, Andrew J; Sandborg, Christy I; Schanberg, Laura E; Wallace, Carol A; Warren, Robert W; Weber, Griffin M; Mandl, Kenneth D

2013-01-01

Registries are a well-established mechanism for obtaining high quality, disease-specific data, but are often highly project-specific in their design, implementation, and policies for data use. In contrast to the conventional model of centralized data contribution, warehousing, and control, we design a self-scaling registry technology for collaborative data sharing, based upon the widely adopted Integrating Biology & the Bedside (i2b2) data warehousing framework and the Shared Health Research Information Network (SHRINE) peer-to-peer networking software. Focusing our design around creation of a scalable solution for collaboration within multi-site disease registries, we leverage the i2b2 and SHRINE open source software to create a modular, ontology-based, federated infrastructure that provides research investigators full ownership and access to their contributed data while supporting permissioned yet robust data sharing. We accomplish these objectives via web services supporting peer-group overlays, group-aware data aggregation, and administrative functions. The 56-site Childhood Arthritis & Rheumatology Research Alliance (CARRA) Registry and 3-site Harvard Inflammatory Bowel Diseases Longitudinal Data Repository now utilize i2b2 self-scaling registry technology (i2b2-SSR). This platform, extensible to federation of multiple projects within and between research networks, encompasses >6000 subjects at sites throughout the USA. We utilize the i2b2-SSR platform to minimize technical barriers to collaboration while enabling fine-grained control over data sharing. The implementation of i2b2-SSR for the multi-site, multi-stakeholder CARRA Registry has established a digital infrastructure for community-driven research data sharing in pediatric rheumatology in the USA. We envision i2b2-SSR as a scalable, reusable solution facilitating interdisciplinary research across diseases.

An open ecosystem engagement strategy through the lens of global food safety

PubMed Central

Stacey, Paul; Fons, Garin; Bernardo, Theresa M

2015-01-01

The Global Food Safety Partnership (GFSP) is a public/private partnership established through the World Bank to improve food safety systems through a globally coordinated and locally-driven approach. This concept paper aims to establish a framework to help GFSP fully leverage the potential of open models. In preparing this paper the authors spoke to many different GFSP stakeholders who asked questions about open models such as: what is it?what’s in it for me?why use an open rather than a proprietary model?how will open models generate equivalent or greater sustainable revenue streams compared to the current “traditional” approaches?  This last question came up many times with assertions that traditional service providers need to see opportunity for equivalent or greater revenue dollars before they will buy-in. This paper identifies open value propositions for GFSP stakeholders and proposes a framework for creating and structuring that value. Open Educational Resources (OER) were the primary open practice GFSP partners spoke to us about, as they provide a logical entry point for collaboration. Going forward, funders should consider requiring that educational resources and concomitant data resulting from their sponsorship should be open, as a public good. There are, however, many other forms of open practice that bring value to the GFSP. Nine different open strategies and tactics (Appendix A) are described, including: open content (including OER and open courseware), open data, open access (research), open government, open source software, open standards, open policy, open licensing and open hardware. It is recommended that all stakeholders proactively pursue "openness" as an operating principle. This paper presents an overall GFSP Open Ecosystem Engagement Strategy within which specific local case examples can be situated. Two different case examples, China and Colombia, are presented to show both project-based and crowd-sourced, direct-to-public paths through this ecosystem. PMID:26213614

Using CamiTK for rapid prototyping of interactive computer assisted medical intervention applications.

PubMed

Promayon, Emmanuel; Fouard, Céline; Bailet, Mathieu; Deram, Aurélien; Fiard, Gaëlle; Hungr, Nikolai; Luboz, Vincent; Payan, Yohan; Sarrazin, Johan; Saubat, Nicolas; Selmi, Sonia Yuki; Voros, Sandrine; Cinquin, Philippe; Troccaz, Jocelyne

2013-01-01

Computer Assisted Medical Intervention (CAMI hereafter) is a complex multi-disciplinary field. CAMI research requires the collaboration of experts in several fields as diverse as medicine, computer science, mathematics, instrumentation, signal processing, mechanics, modeling, automatics, optics, etc. CamiTK is a modular framework that helps researchers and clinicians to collaborate together in order to prototype CAMI applications by regrouping the knowledge and expertise from each discipline. It is an open-source, cross-platform generic and modular tool written in C++ which can handle medical images, surgical navigation, biomedicals simulations and robot control. This paper presents the Computer Assisted Medical Intervention ToolKit (CamiTK) and how it is used in various applications in our research team.

CUAHSI Data Services: Tools and Cyberinfrastructure for Water Data Discovery, Research and Collaboration

NASA Astrophysics Data System (ADS)

Seul, M.; Brazil, L.; Castronova, A. M.

2017-12-01

CUAHSI Data Services: Tools and Cyberinfrastructure for Water Data Discovery, Research and CollaborationEnabling research surrounding interdisciplinary topics often requires a combination of finding, managing, and analyzing large data sets and models from multiple sources. This challenge has led the National Science Foundation to make strategic investments in developing community data tools and cyberinfrastructure that focus on water data, as it is central need for many of these research topics. CUAHSI (The Consortium of Universities for the Advancement of Hydrologic Science, Inc.) is a non-profit organization funded by the National Science Foundation to aid students, researchers, and educators in using and managing data and models to support research and education in the water sciences. This presentation will focus on open-source CUAHSI-supported tools that enable enhanced data discovery online using advanced searching capabilities and computational analysis run in virtual environments pre-designed for educators and scientists so they can focus their efforts on data analysis rather than IT set-up.

Project on Elite Athlete Commitment (PEAK): IV. identification of new candidate commitment sources in the sport commitment model.

PubMed

Scanlan, Tara K; Russell, David G; Scanlan, Larry A; Klunchoo, Tatiana J; Chow, Graig M

2013-10-01

Following a thorough review of the current updated Sport Commitment Model, new candidate commitment sources for possible future inclusion in the model are presented. They were derived from data obtained using the Scanlan Collaborative Interview Method. Three elite New Zealand teams participated: amateur All Black rugby players, amateur Silver Fern netball players, and professional All Black rugby players. An inductive content analysis of these players' open-ended descriptions of their sources of commitment identified four unique new candidate commitment sources: Desire to Excel, Team Tradition, Elite Team Membership, and Worthy of Team Membership. A detailed definition of each candidate source is included along with example quotes from participants. Using a mixed-methods approach, these candidate sources provide a basis for future investigations to test their viability and generalizability for possible expansion of the Sport Commitment Model.

Global review of open access risk assessment software packages valid for global or continental scale analysis

NASA Astrophysics Data System (ADS)

Daniell, James; Simpson, Alanna; Gunasekara, Rashmin; Baca, Abigail; Schaefer, Andreas; Ishizawa, Oscar; Murnane, Rick; Tijssen, Annegien; Deparday, Vivien; Forni, Marc; Himmelfarb, Anne; Leder, Jan

2015-04-01

Over the past few decades, a plethora of open access software packages for the calculation of earthquake, volcanic, tsunami, storm surge, wind and flood have been produced globally. As part of the World Bank GFDRR Review released at the Understanding Risk 2014 Conference, over 80 such open access risk assessment software packages were examined. Commercial software was not considered in the evaluation. A preliminary analysis was used to determine whether the 80 models were currently supported and if they were open access. This process was used to select a subset of 31 models that include 8 earthquake models, 4 cyclone models, 11 flood models, and 8 storm surge/tsunami models for more detailed analysis. By using multi-criteria analysis (MCDA) and simple descriptions of the software uses, the review allows users to select a few relevant software packages for their own testing and development. The detailed analysis evaluated the models on the basis of over 100 criteria and provides a synopsis of available open access natural hazard risk modelling tools. In addition, volcano software packages have since been added making the compendium of risk software tools in excess of 100. There has been a huge increase in the quality and availability of open access/source software over the past few years. For example, private entities such as Deltares now have an open source policy regarding some flood models (NGHS). In addition, leaders in developing risk models in the public sector, such as Geoscience Australia (EQRM, TCRM, TsuDAT, AnuGA) or CAPRA (ERN-Flood, Hurricane, CRISIS2007 etc.), are launching and/or helping many other initiatives. As we achieve greater interoperability between modelling tools, we will also achieve a future wherein different open source and open access modelling tools will be increasingly connected and adapted towards unified multi-risk model platforms and highly customised solutions. It was seen that many software tools could be improved by enabling user-defined exposure and vulnerability. Without this function, many tools can only be used regionally and not at global or continental scale. It is becoming increasingly easy to use multiple packages for a single region and/or hazard to characterize the uncertainty in the risk, or use as checks for the sensitivities in the analysis. There is a potential for valuable synergy between existing software. A number of open source software packages could be combined to generate a multi-risk model with multiple views of a hazard. This extensive review has simply attempted to provide a platform for dialogue between all open source and open access software packages and to hopefully inspire collaboration between developers, given the great work done by all open access and open source developers.

Open-Source Electronic Health Record Systems for Low-Resource Settings: Systematic Review

PubMed Central

Zolfo, Maria; Diro, Ermias

2017-01-01

Background Despite the great impact of information and communication technologies on clinical practice and on the quality of health services, this trend has been almost exclusive to developed countries, whereas countries with poor resources suffer from many economic and social issues that have hindered the real benefits of electronic health (eHealth) tools. As a component of eHealth systems, electronic health records (EHRs) play a fundamental role in patient management and effective medical care services. Thus, the adoption of EHRs in regions with a lack of infrastructure, untrained staff, and ill-equipped health care providers is an important task. However, the main barrier to adopting EHR software in low- and middle-income countries is the cost of its purchase and maintenance, which highlights the open-source approach as a good solution for these underserved areas. Objective The aim of this study was to conduct a systematic review of open-source EHR systems based on the requirements and limitations of low-resource settings. Methods First, we reviewed existing literature on the comparison of available open-source solutions. In close collaboration with the University of Gondar Hospital, Ethiopia, we identified common limitations in poor resource environments and also the main requirements that EHRs should support. Then, we extensively evaluated the current open-source EHR solutions, discussing their strengths and weaknesses, and their appropriateness to fulfill a predefined set of features relevant for low-resource settings. Results The evaluation methodology allowed assessment of several key aspects of available solutions that are as follows: (1) integrated applications, (2) configurable reports, (3) custom reports, (4) custom forms, (5) interoperability, (6) coding systems, (7) authentication methods, (8) patient portal, (9) access control model, (10) cryptographic features, (11) flexible data model, (12) offline support, (13) native client, (14) Web client,(15) other clients, (16) code-based language, (17) development activity, (18) modularity, (19) user interface, (20) community support, and (21) customization. The quality of each feature is discussed for each of the evaluated solutions and a final comparison is presented. Conclusions There is a clear demand for open-source, reliable, and flexible EHR systems in low-resource settings. In this study, we have evaluated and compared five open-source EHR systems following a multidimensional methodology that can provide informed recommendations to other implementers, developers, and health care professionals. We hope that the results of this comparison can guide decision making when needing to adopt, install, and maintain an open-source EHR solution in low-resource settings. PMID:29133283

A New Business Model for Problem Solving-Infusing Open Collaboration and Innovation Health and Human Services

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; Richard, Eliabeth E.; Fogarty, Jennifer A.; Rando, Cynthia M.

2011-01-01

This slide presentation reviews the Space Life Sciences Directorate (SLSD) new business model for problem solving, with emphasis on open collaboration and innovation. The topics that are discussed are: an overview of the work of the Space Life Sciences Directorate and the strategic initiatives that arrived at the new business model. A new business model was required to infuse open collaboration/innovation tools into existing models for research, development and operations (research announcements, procurements, SBIR/STTR etc). This new model involves use of several open innovation partnerships: InnoCentive, Yet2.com, TopCoder and NASA@work. There is also a new organizational structure developed to facilitate the joint collaboration with other NASA centers, international partners, other U.S. Governmental organizations, Academia, Corporate, and Non-Profit organizations: the NASA Human Health and Performance Center (NHHPC).

Iplt--image processing library and toolkit for the electron microscopy community.

PubMed

Philippsen, Ansgar; Schenk, Andreas D; Stahlberg, Henning; Engel, Andreas

2003-01-01

We present the foundation for establishing a modular, collaborative, integrated, open-source architecture for image processing of electron microscopy images, named iplt. It is designed around object oriented paradigms and implemented using the programming languages C++ and Python. In many aspects it deviates from classical image processing approaches. This paper intends to motivate developers within the community to participate in this on-going project. The iplt homepage can be found at http://www.iplt.org.

AliEn—ALICE environment on the GRID

NASA Astrophysics Data System (ADS)

Saiz, P.; Aphecetche, L.; Bunčić, P.; Piskač, R.; Revsbech, J.-E.; Šego, V.; Alice Collaboration

2003-04-01

AliEn ( http://alien.cern.ch) (ALICE Environment) is a Grid framework built on top of the latest Internet standards for information exchange and authentication (SOAP, PKI) and common Open Source components. AliEn provides a virtual file catalogue that allows transparent access to distributed datasets and a number of collaborating Web services which implement the authentication, job execution, file transport, performance monitor and event logging. In the paper we will present the architecture and components of the system.

Temporal motifs reveal collaboration patterns in online task-oriented networks

NASA Astrophysics Data System (ADS)

Xuan, Qi; Fang, Huiting; Fu, Chenbo; Filkov, Vladimir

2015-05-01

Real networks feature layers of interactions and complexity. In them, different types of nodes can interact with each other via a variety of events. Examples of this complexity are task-oriented social networks (TOSNs), where teams of people share tasks towards creating a quality artifact, such as academic research papers or software development in commercial or open source environments. Accomplishing those tasks involves both work, e.g., writing the papers or code, and communication, to discuss and coordinate. Taking into account the different types of activities and how they alternate over time can result in much more precise understanding of the TOSNs behaviors and outcomes. That calls for modeling techniques that can accommodate both node and link heterogeneity as well as temporal change. In this paper, we report on methodology for finding temporal motifs in TOSNs, limited to a system of two people and an artifact. We apply the methods to publicly available data of TOSNs from 31 Open Source Software projects. We find that these temporal motifs are enriched in the observed data. When applied to software development outcome, temporal motifs reveal a distinct dependency between collaboration and communication in the code writing process. Moreover, we show that models based on temporal motifs can be used to more precisely relate both individual developer centrality and team cohesion to programmer productivity than models based on aggregated TOSNs.

Temporal motifs reveal collaboration patterns in online task-oriented networks.

PubMed

Xuan, Qi; Fang, Huiting; Fu, Chenbo; Filkov, Vladimir

2015-05-01

Real networks feature layers of interactions and complexity. In them, different types of nodes can interact with each other via a variety of events. Examples of this complexity are task-oriented social networks (TOSNs), where teams of people share tasks towards creating a quality artifact, such as academic research papers or software development in commercial or open source environments. Accomplishing those tasks involves both work, e.g., writing the papers or code, and communication, to discuss and coordinate. Taking into account the different types of activities and how they alternate over time can result in much more precise understanding of the TOSNs behaviors and outcomes. That calls for modeling techniques that can accommodate both node and link heterogeneity as well as temporal change. In this paper, we report on methodology for finding temporal motifs in TOSNs, limited to a system of two people and an artifact. We apply the methods to publicly available data of TOSNs from 31 Open Source Software projects. We find that these temporal motifs are enriched in the observed data. When applied to software development outcome, temporal motifs reveal a distinct dependency between collaboration and communication in the code writing process. Moreover, we show that models based on temporal motifs can be used to more precisely relate both individual developer centrality and team cohesion to programmer productivity than models based on aggregated TOSNs.

GRIP Collaboration Portal: Information Management for a Hurricane Field Campaign

NASA Astrophysics Data System (ADS)

Conover, H.; Kulkarni, A.; Garrett, M.; Smith, T.; Goodman, H. M.

2010-12-01

NASA’s Genesis and Rapid Intensification Processes (GRIP) experiment, carried out in August and September of 2010, was a complex operation, involving three aircraft and their crews based at different airports, a dozen instrument teams, mission scientists, weather forecasters, project coordinators and a variety of other participants. In addition, GRIP was coordinated with concurrent airborne missions: NOAA’s IFEX and then NSF-funded PREDICT. The GRIP Collaboration Portal was developed to facilitate communication within and between the different teams and serve as an information repository for the field campaign, providing a single access point for project documents, plans, weather forecasts, flight reports and quicklook data. The portal was developed using the Drupal open source content management framework. This presentation will cover both technology and participation issues. Specific examples include: Drupal’s large and diverse open source developer community is an advantage in that we were able to reuse many modules rather than develop capabilities from scratch, but integrating multiple modules developed by many people adds to the overall complexity of the site. Many of the communication capabilities provided by the site, such as discussion forums and blogs, were not used. Participants were diligent about posting necessary documents, but the favored communication method remained email. Drupal's developer-friendly nature allowed for quick development of the customized functionality needed to accommodate the rapidly changing requirements of GRIP experiment. DC-8 Overflight of Hurricane Earl during GRIP Mission

Sustaining an Online, Shared Community Resource for Models, Robust Open source Software Tools and Data for Volcanology - the Vhub Experience

NASA Astrophysics Data System (ADS)

Patra, A. K.; Valentine, G. A.; Bursik, M. I.; Connor, C.; Connor, L.; Jones, M.; Simakov, N.; Aghakhani, H.; Jones-Ivey, R.; Kosar, T.; Zhang, B.

2015-12-01

Over the last 5 years we have created a community collaboratory Vhub.org [Palma et al, J. App. Volc. 3:2 doi:10.1186/2191-5040-3-2] as a place to find volcanology-related resources, and a venue for users to disseminate tools, teaching resources, data, and an online platform to support collaborative efforts. As the community (current active users > 6000 from an estimated community of comparable size) embeds the tools in the collaboratory into educational and research workflows it became imperative to: a) redesign tools into robust, open source reusable software for online and offline usage/enhancement; b) share large datasets with remote collaborators and other users seamlessly with security; c) support complex workflows for uncertainty analysis, validation and verification and data assimilation with large data. The focus on tool development/redevelopment has been twofold - firstly to use best practices in software engineering and new hardware like multi-core and graphic processing units. Secondly we wish to enhance capabilities to support inverse modeling, uncertainty quantification using large ensembles and design of experiments, calibration, validation. Among software engineering practices we practice are open source facilitating community contributions, modularity and reusability. Our initial targets are four popular tools on Vhub - TITAN2D, TEPHRA2, PUFF and LAVA. Use of tools like these requires many observation driven data sets e.g. digital elevation models of topography, satellite imagery, field observations on deposits etc. These data are often maintained in private repositories that are privately shared by "sneaker-net". As a partial solution to this we tested mechanisms using irods software for online sharing of private data with public metadata and access limits. Finally, we adapted use of workflow engines (e.g. Pegasus) to support the complex data and computing workflows needed for usage like uncertainty quantification for hazard analysis using physical models.

MASTODON: A geosciences simulation tool built using the open-source framework MOOSE

NASA Astrophysics Data System (ADS)

Slaughter, A.

2017-12-01

The Department of Energy (DOE) is currently investing millions of dollars annually into various modeling and simulation tools for all aspects of nuclear energy. An important part of this effort includes developing applications based on the open-source Multiphysics Object Oriented Simulation Environment (MOOSE; mooseframework.org) from Idaho National Laboratory (INL).Thanks to the efforts of the DOE and outside collaborators, MOOSE currently contains a large set of physics modules, including phase field, level set, heat conduction, tensor mechanics, Navier-Stokes, fracture (extended finite-element method), and porous media, among others. The tensor mechanics and contact modules, in particular, are well suited for nonlinear geosciences problems. Multi-hazard Analysis for STOchastic time-DOmaiN phenomena (MASTODON; https://seismic-research.inl.gov/SitePages/Mastodon.aspx)--a MOOSE-based application--is capable of analyzing the response of 3D soil-structure systems to external hazards with current development focused on earthquakes. It is capable of simulating seismic events and can perform extensive "source-to-site" simulations including earthquake fault rupture, nonlinear wave propagation, and nonlinear soil-structure interaction analysis. MASTODON also includes a dynamic probabilistic risk assessment capability that enables analysts to not only perform deterministic analyses, but also easily perform probabilistic or stochastic simulations for the purpose of risk assessment. Although MASTODON has been developed for the nuclear industry, it can be used to assess the risk for any structure subjected to earthquakes.The geosciences community can learn from the nuclear industry and harness the enormous effort underway to build simulation tools that are open, modular, and share a common framework. In particular, MOOSE-based multiphysics solvers are inherently parallel, dimension agnostic, adaptive in time and space, fully coupled, and capable of interacting with other applications. The geosciences community could benefit from existing tools by enabling collaboration between researchers and practitioners throughout the world and advance the state-of-the-art in line with other scientific research efforts.

The Challenges of Collaborative Knowledge Creation in Open Innovation Teams

ERIC Educational Resources Information Center

Du Chatenier, Elise; Verstegen, Jos A. A. M.; Biemans, Harm J. A.; Mulder, Martin; Omta, Onno

2009-01-01

In open innovation teams, people from different organizations work together to develop new products, services, or markets. This organizational diversity can positively influence collaborative knowledge creation but can frustrate and obstruct the process as well. To increase the success rates of open innovation, it is vital to learn how individuals…

SNMG: a social-level norm-based methodology for macro-governing service collaboration processes

NASA Astrophysics Data System (ADS)

Gao, Ji; Lv, Hexin; Jin, Zhiyong; Xu, Ping

2017-08-01

In order to adapt to the accelerative open tendency of collaborations between enterprises, this paper proposes a Social-level Norm-based methodology for Macro-Governing service collaboration processes, called SNMG, to regulate and control the social-level visible macro-behaviors of the social individuals participating in collaborations. SNMG not only can remove effectively the uncontrollability hindrance confronted with by open social activities, but also enables across-management-domain collaborations to be implemented by uniting the centralized controls of social individuals for respective social activities. Therefore, this paper provides a brand-new system construction mode to promote the development and large-scale deployment of service collaborations.

Innovation in engineering education through computer assisted learning and virtual university model

NASA Astrophysics Data System (ADS)

Raicu, A.; Raicu, G.

2015-11-01

The paper presents the most important aspects of innovation in Engineering Education using Computer Assisted Learning. The authors propose to increase the quality of Engineering Education programs of study at European standards. The use of computer assisted learning methodologies in all studies is becoming an important resource in Higher Education. We intend to improve the concept of e-Learning using virtual terminals, online support and assisting special training through live seminars and interactive labs to develop a virtual university model. We intend to encourage computer assisted learning and innovation as sources of competitive advantage, to permit vision and learning analysis, identifies new sources of technology and ideas. Our work is based on our university datasets collected during last fifteen years using several e-Learning systems. In Constanta Maritime University (CMU), using eLearning and Knowledge Management Services (KMS) is very important and we apply it effectively to achieve strategic objectives, such as collaboration, sharing and good practice. We have experience in this field since 2000 year using Moodle as KMS in our university. The term KMS can be associated to Open Source Software, Open Standards, Open Protocols and Open Knowledge licenses, initiatives and policies. In CMU Virtual Campus we have today over 12500 active users. Another experience of the authors is the implementation of MariTrainer Wiki educational platform based on Dokeos and DekiWiki under MARICOMP and MEP Leonardo da Vinci Project. We'll also present in this paper a case study under EU funded project POSDRU, where the authors implemented other educational platform in Technological High Schools from Romania used over 1000 teachers. Based on large datasets the study tries to improve the concept of e-Learning teaching using the revolutionary technologies. The new concept present in this paper is that the teaching and learning will be interactive and live. The new and modern techniques are the flexible learning courses, the production of learning demonstrators and testing. All the information from the virtual educational platform remain open space, communication between participants and continued after graduation, so we can talk about creating and maintaining a community of graduates, a partnership with them. Every European University must have a department which aims to provide computer assisted learning using knowledge creation through learning, capture and explication, sharing and collaborative communication, access, use and reuse and knowledge archiving.

Developing a low-cost open-source CTD for research and outreach

NASA Astrophysics Data System (ADS)

Thaler, A. D.; Sturdivant, K.

2013-12-01

Developing a low-cost open-source CTD for research and outreach Andrew David Thaler and Kersey Sturdivant Conductivity, temperature, and depth (CTD). With these three measurements, marine scientists can unlock ocean patterns hidden beneath the waves. The ocean is not uniform, it its filled with swirling eddies, temperature boundaries, layers of high and low salinity, changing densities, and many other physical characteristics. To reveal these patterns, oceanographers use a tool called the CTD. A CTD is found on almost every major research vessel. Rare is the scientific expedition-whether it be coastal work in shallow estuaries or journeys to the deepest ocean trenches-that doesn't begin with the humble CTD cast. The CTD is not cheap. Commercial CTD's start at more the 5,000 and can climb as high as 25,000 or more. We believe that the prohibitive cost of a CTD is an unacceptable barrier to open science. The price tag excludes individuals and groups who lack research grants or significant private funds from conducting oceanographic research. We want to make this tool-the workhorse of oceanographic research-available to anyone with an interest in the oceans. The OpenCTD is a low-cost, open-source CTD suitable for both educators and scientists. The platform is built using readily available parts and is powered by an Arduino-based microcontroller. Our goal is to create a device that is accurate enough to be used for scientific research and can be constructed for less than $200. Source codes, circuit diagrams, and building plans will be freely available. The final instrument will be effective to 200 meters depth. Why 200 meters? For many coastal regions, 200 meters of water depth covers the majority of the ocean that is accessible by small boat. The OpenCTD is targeted to people working in this niche, where entire research projects can be conducted for less than the cost of a commercial CTD. However, the Open CTD is scalable, and anyone with the inclination can adapt our plans to operate in deeper waters. Through a crowdfunding initiative and collaboration with numerous interested scientists, researchers, educators, and developers, we developed the framework for a low-cost, open-source, CTD that is appropriate for both scientific research and public outreach. We envision a network or researchers and educators using the OpenCTD to contribute to local and region scientific programs through open-source databases.

Use of Open Standards and Technologies at the Lunar Mapping and Modeling Project

NASA Astrophysics Data System (ADS)

Law, E.; Malhotra, S.; Bui, B.; Chang, G.; Goodale, C. E.; Ramirez, P.; Kim, R. M.; Sadaqathulla, S.; Rodriguez, L.

2011-12-01

The Lunar Mapping and Modeling Project (LMMP), led by the Marshall Space Flight center (MSFC), is tasked by NASA. The project is responsible for the development of an information system to support lunar exploration activities. It provides lunar explorers a set of tools and lunar map and model products that are predominantly derived from present lunar missions (e.g., the Lunar Reconnaissance Orbiter (LRO)) and from historical missions (e.g., Apollo). At Jet Propulsion Laboratory (JPL), we have built the LMMP interoperable geospatial information system's underlying infrastructure and a single point of entry - the LMMP Portal by employing a number of open standards and technologies. The Portal exposes a set of services to users to allow search, visualization, subset, and download of lunar data managed by the system. Users also have access to a set of tools that visualize, analyze and annotate the data. The infrastructure and Portal are based on web service oriented architecture. We designed the system to support solar system bodies in general including asteroids, earth and planets. We employed a combination of custom software, commercial and open-source components, off-the-shelf hardware and pay-by-use cloud computing services. The use of open standards and web service interfaces facilitate platform and application independent access to the services and data, offering for instances, iPad and Android mobile applications and large screen multi-touch with 3-D terrain viewing functions, for a rich browsing and analysis experience from a variety of platforms. The web services made use of open standards including: Representational State Transfer (REST); and Open Geospatial Consortium (OGC)'s Web Map Service (WMS), Web Coverage Service (WCS), Web Feature Service (WFS). Its data management services have been built on top of a set of open technologies including: Object Oriented Data Technology (OODT) - open source data catalog, archive, file management, data grid framework; openSSO - open source access management and federation platform; solr - open source enterprise search platform; redmine - open source project collaboration and management framework; GDAL - open source geospatial data abstraction library; and others. Its data products are compliant with Federal Geographic Data Committee (FGDC) metadata standard. This standardization allows users to access the data products via custom written applications or off-the-shelf applications such as GoogleEarth. We will demonstrate this ready-to-use system for data discovery and visualization by walking through the data services provided through the portal such as browse, search, and other tools. We will further demonstrate image viewing and layering of lunar map images from the Internet, via mobile devices such as Apple's iPad.

Open Source 3D Multipurpose Measurement System with Submillimetre Fidelity and First Application in Magnetic Resonance.

PubMed

Han, Haopeng; Moritz, Raphael; Oberacker, Eva; Waiczies, Helmar; Niendorf, Thoralf; Winter, Lukas

2017-10-18

Magnetic resonance imaging (MRI) is the mainstay of diagnostic imaging, a versatile instrument for clinical science and the subject of intense research interest. Advancing clinical science, research and technology of MRI requires high fidelity measurements in quantity, location and time of the given physical property. To meet this goal a broad spectrum of commercial measurement systems has been made available. These instruments frequently share in common that they are costly and typically employ closed proprietary hardware and software. This shortcoming makes any adjustment for a specified application difficult if not prohibitive. Recognizing this limitation this work presents COSI Measure, an automated open source measurement system that provides submillimetre resolution, robust configuration and a large working volume to support a versatile range of applications. The submillimetre fidelity and reproducibility/backlash performance were evaluated experimentally. Magnetic field mapping of a single ring Halbach magnet, a 3.0 T and a 7.0 T MR scanner as well as temperature mapping of a radio frequency coil were successfully conducted. Due to its open source nature and versatile construction, the system can be easily modified for other applications. In a resource limited research setting, COSI Measure makes efficient use of laboratory space, financial resources and collaborative efforts.

High Resolution Topography of Polar Regions from Commercial Satellite Imagery, Petascale Computing and Open Source Software

NASA Astrophysics Data System (ADS)

Morin, Paul; Porter, Claire; Cloutier, Michael; Howat, Ian; Noh, Myoung-Jong; Willis, Michael; Kramer, WIlliam; Bauer, Greg; Bates, Brian; Williamson, Cathleen

2017-04-01

Surface topography is among the most fundamental data sets for geosciences, essential for disciplines ranging from glaciology to geodynamics. Two new projects are using sub-meter, commercial imagery licensed by the National Geospatial-Intelligence Agency and open source photogrammetry software to produce a time-tagged 2m posting elevation model of the Arctic and an 8m posting reference elevation model for the Antarctic. When complete, this publically available data will be at higher resolution than any elevation models that cover the entirety of the Western United States. These two polar projects are made possible due to three equally important factors: 1) open-source photogrammetry software, 2) petascale computing, and 3) sub-meter imagery licensed to the United States Government. Our talk will detail the technical challenges of using automated photogrammetry software; the rapid workflow evolution to allow DEM production; the task of deploying the workflow on one of the world's largest supercomputers; the trials of moving massive amounts of data, and the management strategies the team needed to solve in order to meet deadlines. Finally, we will discuss the implications of this type of collaboration for future multi-team use of leadership-class systems such as Blue Waters, and for further elevation mapping.

A new chapter in environmental sensing: The Open-Source Published Environmental Sensing (OPENS) laboratory

NASA Astrophysics Data System (ADS)

Selker, J. S.; Roques, C.; Higgins, C. W.; Good, S. P.; Hut, R.; Selker, A.

2015-12-01

The confluence of 3-Dimensional printing, low-cost solid-state-sensors, low-cost, low-power digital controllers (e.g., Arduinos); and open-source publishing (e.g., Github) is poised to transform environmental sensing. The Open-Source Published Environmental Sensing (OPENS) laboratory has launched and is available for all to use. OPENS combines cutting edge technologies and makes them available to the global environmental sensing community. OPENS includes a Maker lab space where people may collaborate in person or virtually via on-line forum for the publication and discussion of environmental sensing technology (Corvallis, Oregon, USA, please feel free to request a free reservation for space and equipment use). The physical lab houses a test-bed for sensors, as well as a complete classical machine shop, 3-D printers, electronics development benches, and workstations for code development. OPENS will provide a web-based formal publishing framework wherein global students and scientists can peer-review publish (with DOI) novel and evolutionary advancements in environmental sensor systems. This curated and peer-reviewed digital collection will include complete sets of "printable" parts and operating computer code for sensing systems. The physical lab will include all of the machines required to produce these sensing systems. These tools can be addressed in person or virtually, creating a truly global venue for advancement in monitoring earth's environment and agricultural systems. In this talk we will present an example of the process of design and publication the design and data from the OPENS-Permeameter. The publication includes 3-D printing code, Arduino (or other control/logging platform) operational code; sample data sets, and a full discussion of the design set in the scientific context of previous related devices. Editors for the peer-review process are currently sought - contact John.Selker@Oregonstate.edu or Clement.Roques@Oregonstate.edu.

Quality Analysis of Open Street Map Data

NASA Astrophysics Data System (ADS)

Wang, M.; Li, Q.; Hu, Q.; Zhou, M.

2013-05-01

Crowd sourcing geographic data is an opensource geographic data which is contributed by lots of non-professionals and provided to the public. The typical crowd sourcing geographic data contains GPS track data like OpenStreetMap, collaborative map data like Wikimapia, social websites like Twitter and Facebook, POI signed by Jiepang user and so on. These data will provide canonical geographic information for pubic after treatment. As compared with conventional geographic data collection and update method, the crowd sourcing geographic data from the non-professional has characteristics or advantages of large data volume, high currency, abundance information and low cost and becomes a research hotspot of international geographic information science in the recent years. Large volume crowd sourcing geographic data with high currency provides a new solution for geospatial database updating while it need to solve the quality problem of crowd sourcing geographic data obtained from the non-professionals. In this paper, a quality analysis model for OpenStreetMap crowd sourcing geographic data is proposed. Firstly, a quality analysis framework is designed based on data characteristic analysis of OSM data. Secondly, a quality assessment model for OSM data by three different quality elements: completeness, thematic accuracy and positional accuracy is presented. Finally, take the OSM data of Wuhan for instance, the paper analyses and assesses the quality of OSM data with 2011 version of navigation map for reference. The result shows that the high-level roads and urban traffic network of OSM data has a high positional accuracy and completeness so that these OSM data can be used for updating of urban road network database.

Brainhack: a collaborative workshop for the open neuroscience community.

PubMed

Cameron Craddock, R; S Margulies, Daniel; Bellec, Pierre; Nolan Nichols, B; Alcauter, Sarael; A Barrios, Fernando; Burnod, Yves; J Cannistraci, Christopher; Cohen-Adad, Julien; De Leener, Benjamin; Dery, Sebastien; Downar, Jonathan; Dunlop, Katharine; R Franco, Alexandre; Seligman Froehlich, Caroline; J Gerber, Andrew; S Ghosh, Satrajit; J Grabowski, Thomas; Hill, Sean; Sólon Heinsfeld, Anibal; Matthew Hutchison, R; Kundu, Prantik; R Laird, Angela; Liew, Sook-Lei; J Lurie, Daniel; G McLaren, Donald; Meneguzzi, Felipe; Mennes, Maarten; Mesmoudi, Salma; O'Connor, David; H Pasaye, Erick; Peltier, Scott; Poline, Jean-Baptiste; Prasad, Gautam; Fraga Pereira, Ramon; Quirion, Pierre-Olivier; Rokem, Ariel; S Saad, Ziad; Shi, Yonggang; C Strother, Stephen; Toro, Roberto; Q Uddin, Lucina; D Van Horn, John; W Van Meter, John; C Welsh, Robert; Xu, Ting

2016-01-01

Brainhack events offer a novel workshop format with participant-generated content that caters to the rapidly growing open neuroscience community. Including components from hackathons and unconferences, as well as parallel educational sessions, Brainhack fosters novel collaborations around the interests of its attendees. Here we provide an overview of its structure, past events, and example projects. Additionally, we outline current innovations such as regional events and post-conference publications. Through introducing Brainhack to the wider neuroscience community, we hope to provide a unique conference format that promotes the features of collaborative, open science.

Open innovation as a new paradigm for global collaborations in health.

PubMed

Dandonoli, Patricia

2013-08-30

Open innovation, which refers to combining internal and external ideas and internal and external paths to market in order to achieve advances in processes or technologies, is an attractive paradigm for structuring collaborations between developed and developing country entities and people. Such open innovation collaborations can be designed to foster true co-creation among partners in rich and poor settings, thereby breaking down hierarchies and creating greater impact and value for each partner. Using an example from Concern Worldwide's Innovations for Maternal, Newborn &Child Health initiative, this commentary describes an early-stage pilot project built around open innovation in a low resource setting, which puts communities at the center of a process involving a wide range of partners and expertise, and considers how it could be adapted and make more impactful and sustainable by extending the collaboration to include developed country partners.

Book Review: Opening Science, the Evolving Guide on How the Internet is Changing Research, Collaboration, and Scholarly Publishing

EPA Science Inventory

The way we get our funding, collaborate, do our research, and get the word out has evolved over hundreds of years but we can imagine a more open science world, largely facilitated by the internet. The movement towards this more open way of doing and presenting science is coming, ...

A Preliminary Exploration of Operating Models of Second Cycle/Research Led Open Education Involving Industry Collaboration

ERIC Educational Resources Information Center

Olsson, Ulf

2014-01-01

Scientists from five Swedish universities were interviewed about open second cycle education. Research groups and scientists collaborate closely with industry, and the selection of scientists for the study was made in relation to an interest in developing technology-enhanced open education, indicated by applications for funding from the Knowledge…

Talkoot Portals: Discover, Tag, Share, and Reuse Collaborative Science Workflows

NASA Astrophysics Data System (ADS)

Wilson, B. D.; Ramachandran, R.; Lynnes, C.

2009-05-01

A small but growing number of scientists are beginning to harness Web 2.0 technologies, such as wikis, blogs, and social tagging, as a transformative way of doing science. These technologies provide researchers easy mechanisms to critique, suggest and share ideas, data and algorithms. At the same time, large suites of algorithms for science analysis are being made available as remotely-invokable Web Services, which can be chained together to create analysis workflows. This provides the research community an unprecedented opportunity to collaborate by sharing their workflows with one another, reproducing and analyzing research results, and leveraging colleagues' expertise to expedite the process of scientific discovery. However, wikis and similar technologies are limited to text, static images and hyperlinks, providing little support for collaborative data analysis. A team of information technology and Earth science researchers from multiple institutions have come together to improve community collaboration in science analysis by developing a customizable "software appliance" to build collaborative portals for Earth Science services and analysis workflows. The critical requirement is that researchers (not just information technologists) be able to build collaborative sites around service workflows within a few hours. We envision online communities coming together, much like Finnish "talkoot" (a barn raising), to build a shared research space. Talkoot extends a freely available, open source content management framework with a series of modules specific to Earth Science for registering, creating, managing, discovering, tagging and sharing Earth Science web services and workflows for science data processing, analysis and visualization. Users will be able to author a "science story" in shareable web notebooks, including plots or animations, backed up by an executable workflow that directly reproduces the science analysis. New services and workflows of interest will be discoverable using tag search, and advertised using "service casts" and "interest casts" (Atom feeds). Multiple science workflow systems will be plugged into the system, with initial support for UAH's Mining Workflow Composer and the open-source Active BPEL engine, and JPL's SciFlo engine and the VizFlow visual programming interface. With the ability to share and execute analysis workflows, Talkoot portals can be used to do collaborative science in addition to communicate ideas and results. It will be useful for different science domains, mission teams, research projects and organizations. Thus, it will help to solve the "sociological" problem of bringing together disparate groups of researchers, and the technical problem of advertising, discovering, developing, documenting, and maintaining inter-agency science workflows. The presentation will discuss the goals of and barriers to Science 2.0, the social web technologies employed in the Talkoot software appliance (e.g. CMS, social tagging, personal presence, advertising by feeds, etc.), illustrate the resulting collaborative capabilities, and show early prototypes of the web interfaces (e.g. embedded workflows).

Using open source data for flood risk mapping and management in Brazil

NASA Astrophysics Data System (ADS)

Whitley, Alison; Malloy, James; Chirouze, Manuel

2013-04-01

Whitley, A., Malloy, J. and Chirouze, M. Worldwide the frequency and severity of major natural disasters, particularly flooding, has increased. Concurrently, countries such as Brazil are experiencing rapid socio-economic development with growing and increasingly concentrated populations, particularly in urban areas. Hence, it is unsurprising that Brazil has experienced a number of major floods in the past 30 years such as the January 2011 floods which killed 900 people and resulted in significant economic losses of approximately 1 billion US dollars. Understanding, mitigating against and even preventing flood risk is high priority. There is a demand for flood models in many developing economies worldwide for a range of uses including risk management, emergency planning and provision of insurance solutions. However, developing them can be expensive. With an increasing supply of freely-available, open source data, the costs can be significantly reduced, making the tools required for natural hazard risk assessment more accessible. By presenting a flood model developed for eight urban areas of Brazil as part of a collaboration between JBA Risk Management and Guy Carpenter, we explore the value of open source data and demonstrate its usability in a business context within the insurance industry. We begin by detailing the open source data available and compare its suitability to commercially-available equivalents for datasets including digital terrain models and river gauge records. We present flood simulation outputs in order to demonstrate the impact of the choice of dataset on the results obtained and its use in a business context. Via use of the 2D hydraulic model JFlow+, our examples also show how advanced modelling techniques can be used on relatively crude datasets to obtain robust and good quality results. In combination with accessible, standard specification GPU technology and open source data, use of JFlow+ has enabled us to produce large-scale hazard maps suitable for business use and emergency planning such as those we show for Brazil.

New developments in the McStas neutron instrument simulation package

NASA Astrophysics Data System (ADS)

Willendrup, P. K.; Knudsen, E. B.; Klinkby, E.; Nielsen, T.; Farhi, E.; Filges, U.; Lefmann, K.

2014-07-01

The McStas neutron ray-tracing software package is a versatile tool for building accurate simulators of neutron scattering instruments at reactors, short- and long-pulsed spallation sources such as the European Spallation Source. McStas is extensively used for design and optimization of instruments, virtual experiments, data analysis and user training. McStas was founded as a scientific, open-source collaborative code in 1997. This contribution presents the project at its current state and gives an overview of the main new developments in McStas 2.0 (December 2012) and McStas 2.1 (expected fall 2013), including many new components, component parameter uniformisation, partial loss of backward compatibility, updated source brilliance descriptions, developments toward new tools and user interfaces, web interfaces and a new method for estimating beam losses and background from neutron optics.

Collaborative exams: Cheating? Or learning?

NASA Astrophysics Data System (ADS)

Jang, Hyewon; Lasry, Nathaniel; Miller, Kelly; Mazur, Eric

2017-03-01

Virtually all human activity involves collaboration, and yet, collaboration during an examination is typically considered cheating. Collaborative assessments have not been widely adopted because of the perceived lack of individual accountability and the notion that collaboration during assessments simply causes propagation of correct answers. Hence, collaboration could help weaker students without providing much benefit to stronger students. In this paper, we examine student performance in open-ended, two-stage collaborative assessments comprised of an individually accountable round followed by an automatically scored, collaborative round. We show that collaboration entails more than just propagation of correct answers. We find greater rates of correct answers after collaboration for all students, including the strongest members of a team. We also find that half of teams that begin without a correct answer to propagate still obtain the correct answer in the collaborative round. Our findings, combined with the convenience of automatic feedback and grading of open-ended questions, provide a strong argument for adopting collaborative assessments as an integral part of education.

Sharing Water-related Information to Tackle Changes in the Hydrosphere - for Operational Needs (SWITCH-ON)

NASA Astrophysics Data System (ADS)

Arheimer, Berit

2014-05-01

A recently started EU project (FP7 project No 603587) called SWITCH-ON will establish new infrastructure for water research in Europe. The overall goal of the project is to make use of open data, and add value to society by repurposing and refining data from various sources. SWITCH-ON will establish new forms of water research and facilitate the development of new products and services based on principles of sharing and community building. The basic for this work is a virtual water-science laboratory, which consists of open data, dedicated software tools and a set of protocols, hosted at the "SWITCH-ON water information" portal at http://water-switch-on.eu/. The laboratory will seamlessly integrate the open data with harmonised modelling tools and facilities the performance of virtual experiments of comparative science. Comparative science is a new form of research, which will advance science by contrasting water related processes in different environments and help understand complex processes in a more holistic way than individual studies The SWITCH-ON objectives are to use open data for implementing: 1) an innovative spatial information platform with open data tailored for direct water assessments, 2) an entirely new form of collaborative research for water-related sciences, 3) fourteen new operational products and services dedicated to appointed end-users, 4) new business and knowledge to inform individual and collective decisions in line with the Europe's smart growth and environmental objectives. The SWITCH-ON project will be one trigger in a contemporary global movement to better address environmental and societal challenges through openness and collaboration. The poster will present the project visions and achievements so far, and invite more research groups to use the virtual water-science laboratory.

Progress in Open-World, Integrative, Collaborative Science Data Platforms (Invited)

NASA Astrophysics Data System (ADS)

Fox, P. A.

2013-12-01

As collaborative, or network science spreads into more Earth and space science fields, both the participants and their funders have expressed a very strong desire for highly functional data and information capabilities that are a) easy to use, b) integrated in a variety of ways, c) leverage prior investments and keep pace with rapid technical change, and d) are not expensive or time-consuming to build or maintain. In response, and based on our accumulated experience over the last decade and a maturing of several key technical approaches, we have adapted, extended, and integrated several open source applications and frameworks that handle major portions of functionality for these platforms. At minimum, these functions include: an object-type repository, collaboration tools, an ability to identify and manage all key entities in the platform, and an integrated portal to manage diverse content and applications, with varied access levels and privacy options. At a conceptual level, science networks (even small ones) deal with people, and many intellectual artifacts produced or consumed in research, organizational and/our outreach activities, as well as the relations among them. Increasingly these networks are modeled as knowledge networks, i.e. graphs with named and typed relations among the 'nodes'. Nodes can be people, organizations, datasets, events, presentations, publications, videos, meetings, reports, groups, and more. In this heterogeneous ecosystem, it is also important to use a set of common informatics approaches to co-design and co-evolve the needed science data platforms based on what real people want to use them for. In this contribution, we present our methods and results for information modeling, adapting, integrating and evolving a networked data science and information architecture based on several open source technologies (Drupal, VIVO, the Comprehensive Knowledge Archive Network; CKAN, and the Global Handle System; GHS). In particular we present both the instantiation of this data platform for the Deep Carbon Observatory, including key functional and non-functional attributes, how the smart mediation among the components is modeled and managed, and discuss its general applicability.

Healthy Harlem: empowering health consumers through social networking, tailoring and web 2.0 technologies.

PubMed

Khan, Sharib A; McFarlane, Delano J; Li, Jianhua; Ancker, Jessica S; Hutchinson, Carly; Cohall, Alwyn; Kukafka, Rita

2007-10-11

Consumer health informatics has emerged as a strategy to inform and empower patients for self management of their health. The emergence of and explosion in use of user-generated online media (e.g.,blogs) has created new opportunities to inform and educate people about healthy living. Under a prevention research project, we are developing a website that utilizes social content collaboration mediums in conjunction with open-source technologies to create a community-driven resource that provides users with tailored health information.

Open Source Hardware for DIY Environmental Sensing

NASA Astrophysics Data System (ADS)

Aufdenkampe, A. K.; Hicks, S. D.; Damiano, S. G.; Montgomery, D. S.

2014-12-01

The Arduino open source electronics platform has been very popular within the DIY (Do It Yourself) community for several years, and it is now providing environmental science researchers with an inexpensive alternative to commercial data logging and transmission hardware. Here we present the designs for our latest series of custom Arduino-based dataloggers, which include wireless communication options like self-meshing radio networks and cellular phone modules. The main Arduino board uses a custom interface board to connect to various research-grade sensors to take readings of turbidity, dissolved oxygen, water depth and conductivity, soil moisture, solar radiation, and other parameters. Sensors with SDI-12 communications can be directly interfaced to the logger using our open Arduino-SDI-12 software library (https://github.com/StroudCenter/Arduino-SDI-12). Different deployment options are shown, like rugged enclosures to house the loggers and rigs for mounting the sensors in both fresh water and marine environments. After the data has been collected and transmitted by the logger, the data is received by a mySQL-PHP stack running on a web server that can be accessed from anywhere in the world. Once there, the data can be visualized on web pages or served though REST requests and Water One Flow (WOF) services. Since one of the main benefits of using open source hardware is the easy collaboration between users, we are introducing a new web platform for discussion and sharing of ideas and plans for hardware and software designs used with DIY environmental sensors and data loggers.

The AAPT/ComPADRE Digital Library: Supporting Physics Education at All Levels

NASA Astrophysics Data System (ADS)

Mason, Bruce

For more than a decade, the AAPT/ComPADRE Digital Library has been providing online resources, tools, and services that support broad communities of physics faculty and physics education researchers. This online library provides vetted resources for teachers and students, an environment for authors and developers to share their work, and the collaboration tools for a diverse set of users. This talk will focus on the recent collaborations and developments being hosted on or developed with ComPADRE. Examples include PhysPort, making the tools and resources developed by physics education researchers more accessible, the Open Source Physics project, expanding the use of numerical modeling at all levels of physics education, and PICUP, a community for those promoting computation in the physics curriculum. NSF-0435336, 0532798, 0840768, 0937836.

Interoperable Data Access Services for NOAA IOOS

NASA Astrophysics Data System (ADS)

de La Beaujardiere, J.

2008-12-01

The Integrated Ocean Observing System (IOOS) is intended to enhance our ability to collect, deliver, and use ocean information. The goal is to support research and decision-making by providing data on our open oceans, coastal waters, and Great Lakes in the formats, rates, and scales required by scientists, managers, businesses, governments, and the public. The US National Oceanic and Atmospheric Administration (NOAA) is the lead agency for IOOS. NOAA's IOOS office supports the development of regional coastal observing capability and promotes data management efforts to increase data accessibility. Geospatial web services have been established at NOAA data providers including the National Data Buoy Center (NDBC), the Center for Operational Oceanographic Products and Services (CO-OPS), and CoastWatch, and at regional data provider sites. Services established include Open-source Project for a Network Data Access Protocol (OpenDAP), Open Geospatial Consortium (OGC) Sensor Observation Service (SOS), and OGC Web Coverage Service (WCS). These services provide integrated access to data holdings that have been aggregated at each center from multiple sources. We wish to collaborate with other groups to improve our service offerings to maximize interoperability and enhance cross-provider data integration, and to share common service components such as registries, catalogs, data conversion, and gateways. This paper will discuss the current status of NOAA's IOOS efforts and possible next steps.

Developing Pedagogical Expertise in Modern Language Learning and Specific Learning Difficulties through Collaborative and Open Educational Practices

ERIC Educational Resources Information Center

Gallardo, Matilde; Heiser, Sarah; Arias McLaughlin, Ximena

2017-01-01

This paper analyses teachers' engagement with collaborative and open educational practices to develop their pedagogical expertise in the field of modern language (ML) learning and specific learning difficulties (SpLD). The study analyses the findings of a staff development initiative at the Department of Languages, Open University, UK, in 2013,…

The OSG Open Facility: an on-ramp for opportunistic scientific computing

NASA Astrophysics Data System (ADS)

Jayatilaka, B.; Levshina, T.; Sehgal, C.; Gardner, R.; Rynge, M.; Würthwein, F.

2017-10-01

The Open Science Grid (OSG) is a large, robust computing grid that started primarily as a collection of sites associated with large HEP experiments such as ATLAS, CDF, CMS, and DZero, but has evolved in recent years to a much larger user and resource platform. In addition to meeting the US LHC community’s computational needs, the OSG continues to be one of the largest providers of distributed high-throughput computing (DHTC) to researchers from a wide variety of disciplines via the OSG Open Facility. The Open Facility consists of OSG resources that are available opportunistically to users other than resource owners and their collaborators. In the past two years, the Open Facility has doubled its annual throughput to over 200 million wall hours. More than half of these resources are used by over 100 individual researchers from over 60 institutions in fields such as biology, medicine, math, economics, and many others. Over 10% of these individual users utilized in excess of 1 million computational hours each in the past year. The largest source of these cycles is temporary unused capacity at institutions affiliated with US LHC computational sites. An increasing fraction, however, comes from university HPC clusters and large national infrastructure supercomputers offering unused capacity. Such expansions have allowed the OSG to provide ample computational resources to both individual researchers and small groups as well as sizable international science collaborations such as LIGO, AMS, IceCube, and sPHENIX. Opening up access to the Fermilab FabrIc for Frontier Experiments (FIFE) project has also allowed experiments such as mu2e and NOvA to make substantial use of Open Facility resources, the former with over 40 million wall hours in a year. We present how this expansion was accomplished as well as future plans for keeping the OSG Open Facility at the forefront of enabling scientific research by way of DHTC.

OpenSpace: From Data Visualization Research to Planetariums and Classrooms Worldwide

NASA Astrophysics Data System (ADS)

Emmart, C.; Ynnerman, A.; Bock, A.; Kuznetsova, M. M.; Kinzler, R. J.; Trakinski, V.; Mac Low, M. M.; Ebel, D. S. S.

2016-12-01

"OpenSpace" is a new NASA supported open source software that brings the latest techniques from data visualization research to the planetarium community and general public. The American Museum of Natural History (AMNH), in collaboration with informal science institutions (ISI), academic partners, key vendors that support planetariums worldwide, and NASA mission teams and Subject Matter Experts (SME), is creating OpenSpace to enable STEM education and improve U.S. scientific literacy by engaging a broad spectrum of the American public and STEM learners in cutting-edge NASA science and engineering content. The project's primary focus is the interactive presentation of dynamic data from observations (image sequences), astrophysical simulation (volumetric rendering), and space missions (observation geometry visualization). Development of the software began several years ago in collaboration with NASA Goddard's space weather modeling center and in conjunction with academic support from Linköping University (LiU) in Sweden, and continued last year with visualizations of NASA's New Horizons mission and ESA's Rosetta mission. For the New Horizons Pluto encounter, a dozen sites around the world running OpenSpace networked simultaneously to view the close approach to Pluto as narrated in real time by mission control scientists at NASA's Jet Propulsion Laboratory. Subsequent image data from the Long Range Reconnaissance Imaging (LORRI) camera was released by NASA as it downloaded from the spacecraft in the following months. These images, along with post encounter navigation reconstruction data (NASA SPICE) were then used to update the OpenSpace New Horizons visualization, and create a February 2016 public program in which Deputy Project Scientist, Cathy Olkin, demonstrated these results visualized in OpenSpace to a sold out crowd in the AMNH Hayden Planetarium. As demonstrated with the New Horizons visualization in OpenSpace, the goals of the project are to make visible mission planning, discoveries and theoretical simulations within an evolving software designed for live demonstration accompanied by authoritative description.

The OSG Open Facility: An On-Ramp for Opportunistic Scientific Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayatilaka, B.; Levshina, T.; Sehgal, C.

The Open Science Grid (OSG) is a large, robust computing grid that started primarily as a collection of sites associated with large HEP experiments such as ATLAS, CDF, CMS, and DZero, but has evolved in recent years to a much larger user and resource platform. In addition to meeting the US LHC community’s computational needs, the OSG continues to be one of the largest providers of distributed high-throughput computing (DHTC) to researchers from a wide variety of disciplines via the OSG Open Facility. The Open Facility consists of OSG resources that are available opportunistically to users other than resource ownersmore » and their collaborators. In the past two years, the Open Facility has doubled its annual throughput to over 200 million wall hours. More than half of these resources are used by over 100 individual researchers from over 60 institutions in fields such as biology, medicine, math, economics, and many others. Over 10% of these individual users utilized in excess of 1 million computational hours each in the past year. The largest source of these cycles is temporary unused capacity at institutions affiliated with US LHC computational sites. An increasing fraction, however, comes from university HPC clusters and large national infrastructure supercomputers offering unused capacity. Such expansions have allowed the OSG to provide ample computational resources to both individual researchers and small groups as well as sizable international science collaborations such as LIGO, AMS, IceCube, and sPHENIX. Opening up access to the Fermilab FabrIc for Frontier Experiments (FIFE) project has also allowed experiments such as mu2e and NOvA to make substantial use of Open Facility resources, the former with over 40 million wall hours in a year. We present how this expansion was accomplished as well as future plans for keeping the OSG Open Facility at the forefront of enabling scientific research by way of DHTC.« less

Biopython: freely available Python tools for computational molecular biology and bioinformatics

PubMed Central

Cock, Peter J. A.; Antao, Tiago; Chang, Jeffrey T.; Chapman, Brad A.; Cox, Cymon J.; Dalke, Andrew; Friedberg, Iddo; Hamelryck, Thomas; Kauff, Frank; Wilczynski, Bartek; de Hoon, Michiel J. L.

2009-01-01

Summary: The Biopython project is a mature open source international collaboration of volunteer developers, providing Python libraries for a wide range of bioinformatics problems. Biopython includes modules for reading and writing different sequence file formats and multiple sequence alignments, dealing with 3D macro molecular structures, interacting with common tools such as BLAST, ClustalW and EMBOSS, accessing key online databases, as well as providing numerical methods for statistical learning. Availability: Biopython is freely available, with documentation and source code at www.biopython.org under the Biopython license. Contact: All queries should be directed to the Biopython mailing lists, see www.biopython.org/wiki/_Mailing_listspeter.cock@scri.ac.uk. PMID:19304878

Advanced Cyberinfrastructure for Geochronology as a Collaborative Endeavor: A Decade of Progress, A Decade of Plans

NASA Astrophysics Data System (ADS)

Bowring, J. F.; McLean, N. M.; Walker, J. D.; Gehrels, G. E.; Rubin, K. H.; Dutton, A.; Bowring, S. A.; Rioux, M. E.

2015-12-01

The Cyber Infrastructure Research and Development Lab for the Earth Sciences (CIRDLES.org) has worked collaboratively for the last decade with geochronologists from EARTHTIME and EarthChem to build cyberinfrastructure geared to ensuring transparency and reproducibility in geoscience workflows and is engaged in refining and extending that work to serve additional geochronology domains during the next decade. ET_Redux (formerly U-Pb_Redux) is a free open-source software system that provides end-to-end support for the analysis of U-Pb geochronological data. The system reduces raw mass spectrometer (TIMS and LA-ICPMS) data to U-Pb dates, allows users to interpret ages from these data, and then facilitates the seamless federation of the results from one or more labs into a community web-accessible database using standard and open techniques. This EarthChem database - GeoChron.org - depends on keyed references to the System for Earth Sample Registration (SESAR) database that stores metadata about registered samples. These keys are each a unique International Geo Sample Number (IGSN) assigned to a sample and to its derivatives. ET_Redux provides for interaction with this archive, allowing analysts to store, maintain, retrieve, and share their data and analytical results electronically with whomever they choose. This initiative has created an open standard for the data elements of a complete reduction and analysis of U-Pb data, and is currently working to complete the same for U-series geochronology. We have demonstrated the utility of interdisciplinary collaboration between computer scientists and geoscientists in achieving a working and useful system that provides transparency and supports reproducibility, allowing geochemists to focus on their specialties. The software engineering community also benefits by acquiring research opportunities to improve development process methodologies used in the design, implementation, and sustainability of domain-specific software.

ABrowse--a customizable next-generation genome browser framework.

PubMed

Kong, Lei; Wang, Jun; Zhao, Shuqi; Gu, Xiaocheng; Luo, Jingchu; Gao, Ge

2012-01-05

With the rapid growth of genome sequencing projects, genome browser is becoming indispensable, not only as a visualization system but also as an interactive platform to support open data access and collaborative work. Thus a customizable genome browser framework with rich functions and flexible configuration is needed to facilitate various genome research projects. Based on next-generation web technologies, we have developed a general-purpose genome browser framework ABrowse which provides interactive browsing experience, open data access and collaborative work support. By supporting Google-map-like smooth navigation, ABrowse offers end users highly interactive browsing experience. To facilitate further data analysis, multiple data access approaches are supported for external platforms to retrieve data from ABrowse. To promote collaborative work, an online user-space is provided for end users to create, store and share comments, annotations and landmarks. For data providers, ABrowse is highly customizable and configurable. The framework provides a set of utilities to import annotation data conveniently. To build ABrowse on existing annotation databases, data providers could specify SQL statements according to database schema. And customized pages for detailed information display of annotation entries could be easily plugged in. For developers, new drawing strategies could be integrated into ABrowse for new types of annotation data. In addition, standard web service is provided for data retrieval remotely, providing underlying machine-oriented programming interface for open data access. ABrowse framework is valuable for end users, data providers and developers by providing rich user functions and flexible customization approaches. The source code is published under GNU Lesser General Public License v3.0 and is accessible at http://www.abrowse.org/. To demonstrate all the features of ABrowse, a live demo for Arabidopsis thaliana genome has been built at http://arabidopsis.cbi.edu.cn/.

ProDaMa: an open source Python library to generate protein structure datasets.

PubMed

Armano, Giuliano; Manconi, Andrea

2009-10-02

The huge difference between the number of known sequences and known tertiary structures has justified the use of automated methods for protein analysis. Although a general methodology to solve these problems has not been yet devised, researchers are engaged in developing more accurate techniques and algorithms whose training plays a relevant role in determining their performance. From this perspective, particular importance is given to the training data used in experiments, and researchers are often engaged in the generation of specialized datasets that meet their requirements. To facilitate the task of generating specialized datasets we devised and implemented ProDaMa, an open source Python library than provides classes for retrieving, organizing, updating, analyzing, and filtering protein data. ProDaMa has been used to generate specialized datasets useful for secondary structure prediction and to develop a collaborative web application aimed at generating and sharing protein structure datasets. The library, the related database, and the documentation are freely available at the URL http://iasc.diee.unica.it/prodama.

PYCHEM: a multivariate analysis package for python.

PubMed

Jarvis, Roger M; Broadhurst, David; Johnson, Helen; O'Boyle, Noel M; Goodacre, Royston

2006-10-15

We have implemented a multivariate statistical analysis toolbox, with an optional standalone graphical user interface (GUI), using the Python scripting language. This is a free and open source project that addresses the need for a multivariate analysis toolbox in Python. Although the functionality provided does not cover the full range of multivariate tools that are available, it has a broad complement of methods that are widely used in the biological sciences. In contrast to tools like MATLAB, PyChem 2.0.0 is easily accessible and free, allows for rapid extension using a range of Python modules and is part of the growing amount of complementary and interoperable scientific software in Python based upon SciPy. One of the attractions of PyChem is that it is an open source project and so there is an opportunity, through collaboration, to increase the scope of the software and to continually evolve a user-friendly platform that has applicability across a wide range of analytical and post-genomic disciplines. http://sourceforge.net/projects/pychem

Conversion of National Health Insurance Service-National Sample Cohort (NHIS-NSC) Database into Observational Medical Outcomes Partnership-Common Data Model (OMOP-CDM).

PubMed

You, Seng Chan; Lee, Seongwon; Cho, Soo-Yeon; Park, Hojun; Jung, Sungjae; Cho, Jaehyeong; Yoon, Dukyong; Park, Rae Woong

2017-01-01

It is increasingly necessary to generate medical evidence applicable to Asian people compared to those in Western countries. Observational Health Data Sciences a Informatics (OHDSI) is an international collaborative which aims to facilitate generating high-quality evidence via creating and applying open-source data analytic solutions to a large network of health databases across countries. We aimed to incorporate Korean nationwide cohort data into the OHDSI network by converting the national sample cohort into Observational Medical Outcomes Partnership-Common Data Model (OMOP-CDM). The data of 1.13 million subjects was converted to OMOP-CDM, resulting in average 99.1% conversion rate. The ACHILLES, open-source OMOP-CDM-based data profiling tool, was conducted on the converted database to visualize data-driven characterization and access the quality of data. The OMOP-CDM version of National Health Insurance Service-National Sample Cohort (NHIS-NSC) can be a valuable tool for multiple aspects of medical research by incorporation into the OHDSI research network.

Sticks AND Carrots: Encouraging Open Science at its source.

PubMed

Leonelli, Sabina; Spichtinger, Daniel; Prainsack, Barbara

2015-06-30

The Open Science (OS) movement has been seen as an important facilitator for public participation in science. This has been underpinned by the assumption that widespread and free access to research outputs leads to (i) better and more efficient science, (ii) economic growth, in particular for small and medium-sized enterprises wishing to capitalise on research findings and (iii) increased transparency of knowledge production and its outcomes. The latter in particular could function as a catalyst for public participation and engagement. Whether OS is likely to help realise these benefits, however, will depend on the emergence of systemic incentives for scientists to utilise OS in a meaningful manner. While some areas, the environmental sciences have a long tradition of open ethos, citizen inclusion and global collaborations, such activities need to be more systematically supported and promoted by funders and learned societies in order to improve scientific research and public participation.

Open-Source Electronic Health Record Systems for Low-Resource Settings: Systematic Review.

PubMed

Syzdykova, Assel; Malta, André; Zolfo, Maria; Diro, Ermias; Oliveira, José Luis

2017-11-13

Despite the great impact of information and communication technologies on clinical practice and on the quality of health services, this trend has been almost exclusive to developed countries, whereas countries with poor resources suffer from many economic and social issues that have hindered the real benefits of electronic health (eHealth) tools. As a component of eHealth systems, electronic health records (EHRs) play a fundamental role in patient management and effective medical care services. Thus, the adoption of EHRs in regions with a lack of infrastructure, untrained staff, and ill-equipped health care providers is an important task. However, the main barrier to adopting EHR software in low- and middle-income countries is the cost of its purchase and maintenance, which highlights the open-source approach as a good solution for these underserved areas. The aim of this study was to conduct a systematic review of open-source EHR systems based on the requirements and limitations of low-resource settings. First, we reviewed existing literature on the comparison of available open-source solutions. In close collaboration with the University of Gondar Hospital, Ethiopia, we identified common limitations in poor resource environments and also the main requirements that EHRs should support. Then, we extensively evaluated the current open-source EHR solutions, discussing their strengths and weaknesses, and their appropriateness to fulfill a predefined set of features relevant for low-resource settings. The evaluation methodology allowed assessment of several key aspects of available solutions that are as follows: (1) integrated applications, (2) configurable reports, (3) custom reports, (4) custom forms, (5) interoperability, (6) coding systems, (7) authentication methods, (8) patient portal, (9) access control model, (10) cryptographic features, (11) flexible data model, (12) offline support, (13) native client, (14) Web client,(15) other clients, (16) code-based language, (17) development activity, (18) modularity, (19) user interface, (20) community support, and (21) customization. The quality of each feature is discussed for each of the evaluated solutions and a final comparison is presented. There is a clear demand for open-source, reliable, and flexible EHR systems in low-resource settings. In this study, we have evaluated and compared five open-source EHR systems following a multidimensional methodology that can provide informed recommendations to other implementers, developers, and health care professionals. We hope that the results of this comparison can guide decision making when needing to adopt, install, and maintain an open-source EHR solution in low-resource settings. ©Assel Syzdykova, André Malta, Maria Zolfo, Ermias Diro, José Luis Oliveira. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 13.11.2017.

Massive stereo-based DTM production for Mars on cloud computers

NASA Astrophysics Data System (ADS)

Tao, Y.; Muller, J.-P.; Sidiropoulos, P.; Xiong, Si-Ting; Putri, A. R. D.; Walter, S. H. G.; Veitch-Michaelis, J.; Yershov, V.

2018-05-01

Digital Terrain Model (DTM) creation is essential to improving our understanding of the formation processes of the Martian surface. Although there have been previous demonstrations of open-source or commercial planetary 3D reconstruction software, planetary scientists are still struggling with creating good quality DTMs that meet their science needs, especially when there is a requirement to produce a large number of high quality DTMs using "free" software. In this paper, we describe a new open source system to overcome many of these obstacles by demonstrating results in the context of issues found from experience with several planetary DTM pipelines. We introduce a new fully automated multi-resolution DTM processing chain for NASA Mars Reconnaissance Orbiter (MRO) Context Camera (CTX) and High Resolution Imaging Science Experiment (HiRISE) stereo processing, called the Co-registration Ames Stereo Pipeline (ASP) Gotcha Optimised (CASP-GO), based on the open source NASA ASP. CASP-GO employs tie-point based multi-resolution image co-registration, and Gotcha sub-pixel refinement and densification. CASP-GO pipeline is used to produce planet-wide CTX and HiRISE DTMs that guarantee global geo-referencing compliance with respect to High Resolution Stereo Colour imaging (HRSC), and thence to the Mars Orbiter Laser Altimeter (MOLA); providing refined stereo matching completeness and accuracy. All software and good quality products introduced in this paper are being made open-source to the planetary science community through collaboration with NASA Ames, United States Geological Survey (USGS) and the Jet Propulsion Laboratory (JPL), Advanced Multi-Mission Operations System (AMMOS) Planetary Data System (PDS) Pipeline Service (APPS-PDS4), as well as browseable and visualisable through the iMars web based Geographic Information System (webGIS) system.

Developing international open science collaborations: Funder reflections on the Open Science Prize.

PubMed

Kittrie, Elizabeth; Atienza, Audie A; Kiley, Robert; Carr, David; MacFarlane, Aki; Pai, Vinay; Couch, Jennifer; Bajkowski, Jared; Bonner, Joseph F; Mietchen, Daniel; Bourne, Philip E

2017-08-01

The Open Science Prize was established with the following objectives: first, to encourage the crowdsourcing of open data to make breakthroughs that are of biomedical significance; second, to illustrate that funders can indeed work together when scientific interests are aligned; and finally, to encourage international collaboration between investigators with the intent of achieving important innovations that would not be possible otherwise. The process for running the competition and the successes and challenges that arose are presented.

Developing international open science collaborations: Funder reflections on the Open Science Prize

PubMed Central

Kittrie, Elizabeth; Atienza, Audie A.; Kiley, Robert; Carr, David; MacFarlane, Aki; Pai, Vinay; Couch, Jennifer; Bajkowski, Jared; Bonner, Joseph F.; Mietchen, Daniel

2017-01-01

The Open Science Prize was established with the following objectives: first, to encourage the crowdsourcing of open data to make breakthroughs that are of biomedical significance; second, to illustrate that funders can indeed work together when scientific interests are aligned; and finally, to encourage international collaboration between investigators with the intent of achieving important innovations that would not be possible otherwise. The process for running the competition and the successes and challenges that arose are presented. PMID:28763440

Remix as Professional Learning: Educators' Iterative Literacy Practice in CLMOOC

ERIC Educational Resources Information Center

Smith, Anna; West-Puckett, Stephanie; Cantrill, Christina; Zamora, Mia

2016-01-01

The Connected Learning Massive Open Online Collaboration (CLMOOC) is an online professional development experience designed as an openly networked, production-centered, participatory learning collaboration for educators. Addressing the paucity of research that investigates learning processes in MOOC experiences, this paper examines the situated…

Converging Work-Talk Patterns in Online Task-Oriented Communities.

PubMed

Xuan, Qi; Devanbu, Premkumar; Filkov, Vladimir

2016-01-01

Much of what we do is accomplished by working collaboratively with others, and a large portion of our lives are spent working and talking; the patterns embodied in the alternation of working and talking can provide much useful insight into task-oriented social behaviors. The available electronic traces of the different kinds of human activities in online communities are an empirical goldmine that can enable the holistic study and understanding of these social systems. Open Source Software (OSS) projects are prototypical examples of collaborative, task-oriented communities, depending on volunteers for high-quality work. Here, we use sequence analysis methods to identify the work-talk patterns of software developers in online communities of Open Source Software projects. We find that software developers prefer to persist in same kinds of activities, i.e., a string of work activities followed by a string of talk activities and so forth, rather than switch them frequently; this tendency strengthens with time, suggesting that developers become more efficient, and can work longer with fewer interruptions. This process is accompanied by the formation of community culture: developers' patterns in the same communities get closer with time while different communities get relatively more different. The emergence of community culture is apparently driven by both "talk" and "work". Finally, we also find that workers with good balance between "work" and "talk" tend to produce just as much work as those that focus strongly on "work"; however, the former appear to be more likely to continue to be active contributors in the communities.

Development and Implementation of Dynamic Scripts to Execute Cycled WRF/GSI Forecasts

NASA Technical Reports Server (NTRS)

Zavodsky, Bradley; Srikishen, Jayanthi; Berndt, Emily; Li, Quanli; Watson, Leela

2014-01-01

Automating the coupling of data assimilation (DA) and modeling systems is a unique challenge in the numerical weather prediction (NWP) research community. In recent years, the Development Testbed Center (DTC) has released well-documented tools such as the Weather Research and Forecasting (WRF) model and the Gridpoint Statistical Interpolation (GSI) DA system that can be easily downloaded, installed, and run by researchers on their local systems. However, developing a coupled system in which the various preprocessing, DA, model, and postprocessing capabilities are all integrated can be labor-intensive if one has little experience with any of these individual systems. Additionally, operational modeling entities generally have specific coupling methodologies that can take time to understand and develop code to implement properly. To better enable collaborating researchers to perform modeling and DA experiments with GSI, the Short-term Prediction Research and Transition (SPoRT) Center has developed a set of Perl scripts that couple GSI and WRF in a cycling methodology consistent with the use of real-time, regional observation data from the National Centers for Environmental Prediction (NCEP)/Environmental Modeling Center (EMC). Because Perl is open source, the code can be easily downloaded and executed regardless of the user's native shell environment. This paper will provide a description of this open-source code and descriptions of a number of the use cases that have been performed by SPoRT collaborators using the scripts on different computing systems.

The Role of Citizen Science in Risk Mitigation and Disaster Response: A Case Study of 2015 Nepalese Earthquake Using OpenStreetMap

NASA Astrophysics Data System (ADS)

Rieger, C.; Byrne, J. M.

2015-12-01

Citizen science includes networks of ordinary people acting as sensors, observing and recording information for science. OpenStreetMap is one such sensor network which empowers citizens to collaboratively produce a global picture from free geographic information. The success of this open source software is extended by the development of freely used open databases for the user community. Participating citizens do not require a high level of skill. Final results are processed by professionals following quality assurance protocols before map information is released. OpenStreetMap is not only the cheapest source of timely maps in many cases but also often the only source. This is particularly true in developing countries. Emergency responses to the recent earthquake in Nepal illustrates the value for rapidly updated geographical information. This includes emergency management, damage assessment, post-disaster response, and future risk mitigation. Local disaster conditions (landslides, road closings, bridge failures, etc.) were documented for local aid workers by citizen scientists working remotely. Satellites and drones provide digital imagery of the disaster zone and OpenStreetMap participants shared the data from locations around the globe. For the Nepal earthquake, OpenStreetMap provided a team of volunteers on the ground through their Humanitarian OpenStreetMap Team (HOT) which contribute data to the disaster response through smartphones and laptops. This, combined with global citizen science efforts, provided immediate geographically useful maps to assist aid workers, including the Red Cross and Canadian DART Team, and the Nepalese government. As of August 2014, almost 1.7 million users provided over 2.5 billion edits to the OpenStreetMap map database. Due to the increased usage of smartphones, GPS-enabled devices, and the growing participation in citizen science projects, data gathering is proving an effective way to contribute as a global citizen. This paper aims to describe the significance of citizen participation in the case of the Nepal earthquake using OpenStreetMap to respond to disasters as well as its role in future risk mitigation.

Open-source web-enabled data management, analyses, and visualization of very large data in geosciences using Jupyter, Apache Spark, and community tools

NASA Astrophysics Data System (ADS)

Chaudhary, A.

2017-12-01

Current simulation models and sensors are producing high-resolution, high-velocity data in geosciences domain. Knowledge discovery from these complex and large size datasets require tools that are capable of handling very large data and providing interactive data analytics features to researchers. To this end, Kitware and its collaborators are producing open-source tools GeoNotebook, GeoJS, Gaia, and Minerva for geosciences that are using hardware accelerated graphics and advancements in parallel and distributed processing (Celery and Apache Spark) and can be loosely coupled to solve real-world use-cases. GeoNotebook (https://github.com/OpenGeoscience/geonotebook) is co-developed by Kitware and NASA-Ames and is an extension to the Jupyter Notebook. It provides interactive visualization and python-based analysis of geospatial data and depending the backend (KTile or GeoPySpark) can handle data sizes of Hundreds of Gigabytes to Terabytes. GeoNotebook uses GeoJS (https://github.com/OpenGeoscience/geojs) to render very large geospatial data on the map using WebGL and Canvas2D API. GeoJS is more than just a GIS library as users can create scientific plots such as vector and contour and can embed InfoVis plots using D3.js. GeoJS aims for high-performance visualization and interactive data exploration of scientific and geospatial location aware datasets and supports features such as Point, Line, Polygon, and advanced features such as Pixelmap, Contour, Heatmap, and Choropleth. Our another open-source tool Minerva ((https://github.com/kitware/minerva) is a geospatial application that is built on top of open-source web-based data management system Girder (https://github.com/girder/girder) which provides an ability to access data from HDFS or Amazon S3 buckets and provides capabilities to perform visualization and analyses on geosciences data in a web environment using GDAL and GeoPandas wrapped in a unified API provided by Gaia (https://github.com/OpenDataAnalytics/gaia). In this presentation, we will discuss core features of each of these tools and will present lessons learned on handling large data in the context of data management, analyses and visualization.

Facilitating learning through an international virtual collaborative practice: A case study.

PubMed

Wihlborg, Monne; Friberg, Elizabeth E; Rose, Karen M; Eastham, Linda

2018-02-01

Internationalisation of higher education involving information and communication technology such as e-learning opens opportunities for innovative learning approaches across nations and cultures. Describe a case in practice of collaborative and transformative learning in relation to 'internationalisation on home grounds' with the broader learning objective of 'becoming aware and knowledgeable'. A mutually developed project established a virtual international collaborative exchange for faculty and students using a course management software (MOODLE) and open access technology (Adobe CONNECT). Two research universities in Sweden and the United States. Approximately 90 nursing students from each university per semester over several semesters. A collaborative process to develop a joint learning community to construct a virtual module and learning activity involving academics and nursing students in two countries using principles of meaning construction and negotiated learning. Developed possibilities for dealing with the challenges and finding strategies for a future higher education system that opens dialogues worldwide. Virtual international exchanges open innovative communication and learning contexts across nations and cultures. Internationalisation is so much more than students and teachers' mobility. 'Internationalisation on home grounds' (internationalisation for all) should receive more attention to support faculty and student collaboration, learning, and professional development. Copyright © 2017 Elsevier Ltd. All rights reserved.

Open Drug Discovery Teams: A Chemistry Mobile App for Collaboration.

PubMed

Ekins, Sean; Clark, Alex M; Williams, Antony J

2012-08-01

The Open Drug Discovery Teams (ODDT) project provides a mobile app primarily intended as a research topic aggregator of predominantly open science data collected from various sources on the internet. It exists to facilitate interdisciplinary teamwork and to relieve the user from data overload, delivering access to information that is highly relevant and focused on their topic areas of interest. Research topics include areas of chemistry and adjacent molecule-oriented biomedical sciences, with an emphasis on those which are most amenable to open research at present. These include rare and neglected diseases, and precompetitive and public-good initiatives such as green chemistry. The ODDT project uses a free mobile app as user entry point. The app has a magazine-like interface, and server-side infrastructure for hosting chemistry-related data as well as value added services. The project is open to participation from anyone and provides the ability for users to make annotations and assertions, thereby contributing to the collective value of the data to the engaged community. Much of the content is derived from public sources, but the platform is also amenable to commercial data input. The technology could also be readily used in-house by organizations as a research aggregator that could integrate internal and external science and discussion. The infrastructure for the app is currently based upon the Twitter API as a useful proof of concept for a real time source of publicly generated content. This could be extended further by accessing other APIs providing news and data feeds of relevance to a particular area of interest. As the project evolves, social networking features will be developed for organizing participants into teams, with various forms of communication and content management possible.

Open Drug Discovery Teams: A Chemistry Mobile App for Collaboration

PubMed Central

Ekins, Sean; Clark, Alex M; Williams, Antony J

2012-01-01

Abstract The Open Drug Discovery Teams (ODDT) project provides a mobile app primarily intended as a research topic aggregator of predominantly open science data collected from various sources on the internet. It exists to facilitate interdisciplinary teamwork and to relieve the user from data overload, delivering access to information that is highly relevant and focused on their topic areas of interest. Research topics include areas of chemistry and adjacent molecule-oriented biomedical sciences, with an emphasis on those which are most amenable to open research at present. These include rare and neglected diseases, and precompetitive and public-good initiatives such as green chemistry. The ODDT project uses a free mobile app as user entry point. The app has a magazine-like interface, and server-side infrastructure for hosting chemistry-related data as well as value added services. The project is open to participation from anyone and provides the ability for users to make annotations and assertions, thereby contributing to the collective value of the data to the engaged community. Much of the content is derived from public sources, but the platform is also amenable to commercial data input. The technology could also be readily used in-house by organizations as a research aggregator that could integrate internal and external science and discussion. The infrastructure for the app is currently based upon the Twitter API as a useful proof of concept for a real time source of publicly generated content. This could be extended further by accessing other APIs providing news and data feeds of relevance to a particular area of interest. As the project evolves, social networking features will be developed for organizing participants into teams, with various forms of communication and content management possible. PMID:23198003

THE CDF ARCHIVE: HERSCHEL PACS AND SPIRE SPECTROSCOPIC DATA PIPELINE AND PRODUCTS FOR PROTOSTARS AND YOUNG STELLAR OBJECTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, Joel D.; Yang, Yao-Lun; II, Neal J. Evans

2016-03-15

We present the COPS-DIGIT-FOOSH (CDF) Herschel spectroscopy data product archive, and related ancillary data products, along with data fidelity assessments, and a user-created archive in collaboration with the Herschel-PACS and SPIRE ICC groups. Our products include datacubes, contour maps, automated line fitting results, and best 1D spectra products for all protostellar and disk sources observed with PACS in RangeScan mode for two observing programs: the DIGIT Open Time Key Program (KPOT-nevans-1 and SDP-nevans-1; PI: N. Evans), and the FOOSH Open Time Program (OT1-jgreen02-2; PI: J. Green). In addition, we provide our best SPIRE-FTS spectroscopic products for the COPS Open Time Program (OT2-jgreen02-6;more » PI: J. Green) and FOOSH sources. We include details of data processing, descriptions of output products, and tests of their reliability for user applications. We identify the parts of the data set to be used with caution. The resulting absolute flux calibration has improved in almost all cases. Compared to previous reductions, the resulting rotational temperatures and numbers of CO molecules have changed substantially in some sources. On average, however, the rotational temperatures have not changed substantially (<2%), but the number of warm (T{sub rot} ∼ 300 K) CO molecules has increased by about 18%.« less

The CDF Archive: Herschel PACS and SPIRE Spectroscopic Data Pipeline and Products for Protostars and Young Stellar Objects

NASA Astrophysics Data System (ADS)

Green, Joel D.; Yang, Yao-Lun; Evans, Neal J., II; Karska, Agata; Herczeg, Gregory; van Dishoeck, Ewine F.; Lee, Jeong-Eun; Larson, Rebecca L.; Bouwman, Jeroen

2016-03-01

We present the COPS-DIGIT-FOOSH (CDF) Herschel spectroscopy data product archive, and related ancillary data products, along with data fidelity assessments, and a user-created archive in collaboration with the Herschel-PACS and SPIRE ICC groups. Our products include datacubes, contour maps, automated line fitting results, and best 1D spectra products for all protostellar and disk sources observed with PACS in RangeScan mode for two observing programs: the DIGIT Open Time Key Program (KPOT_nevans1 and SDP_nevans_1; PI: N. Evans), and the FOOSH Open Time Program (OT1_jgreen02_2; PI: J. Green). In addition, we provide our best SPIRE-FTS spectroscopic products for the COPS Open Time Program (OT2_jgreen02_6; PI: J. Green) and FOOSH sources. We include details of data processing, descriptions of output products, and tests of their reliability for user applications. We identify the parts of the data set to be used with caution. The resulting absolute flux calibration has improved in almost all cases. Compared to previous reductions, the resulting rotational temperatures and numbers of CO molecules have changed substantially in some sources. On average, however, the rotational temperatures have not changed substantially (<2%), but the number of warm (Trot ∼ 300 K) CO molecules has increased by about 18%.

PASSIM--an open source software system for managing information in biomedical studies.

PubMed

Viksna, Juris; Celms, Edgars; Opmanis, Martins; Podnieks, Karlis; Rucevskis, Peteris; Zarins, Andris; Barrett, Amy; Neogi, Sudeshna Guha; Krestyaninova, Maria; McCarthy, Mark I; Brazma, Alvis; Sarkans, Ugis

2007-02-09

One of the crucial aspects of day-to-day laboratory information management is collection, storage and retrieval of information about research subjects and biomedical samples. An efficient link between sample data and experiment results is absolutely imperative for a successful outcome of a biomedical study. Currently available software solutions are largely limited to large-scale, expensive commercial Laboratory Information Management Systems (LIMS). Acquiring such LIMS indeed can bring laboratory information management to a higher level, but often implies sufficient investment of time, effort and funds, which are not always available. There is a clear need for lightweight open source systems for patient and sample information management. We present a web-based tool for submission, management and retrieval of sample and research subject data. The system secures confidentiality by separating anonymized sample information from individuals' records. It is simple and generic, and can be customised for various biomedical studies. Information can be both entered and accessed using the same web interface. User groups and their privileges can be defined. The system is open-source and is supplied with an on-line tutorial and necessary documentation. It has proven to be successful in a large international collaborative project. The presented system closes the gap between the need and the availability of lightweight software solutions for managing information in biomedical studies involving human research subjects.

Learning from Multiple Collaborating Intelligent Tutors: An Agent-based Approach.

ERIC Educational Resources Information Center

Solomos, Konstantinos; Avouris, Nikolaos

1999-01-01

Describes an open distributed multi-agent tutoring system (MATS) and discusses issues related to learning in such open environments. Topics include modeling a one student-many teachers approach in a computer-based learning context; distributed artificial intelligence; implementation issues; collaboration; and user interaction. (Author/LRW)

MilxXplore: a web-based system to explore large imaging datasets.

PubMed

Bourgeat, P; Dore, V; Villemagne, V L; Rowe, C C; Salvado, O; Fripp, J

2013-01-01

As large-scale medical imaging studies are becoming more common, there is an increasing reliance on automated software to extract quantitative information from these images. As the size of the cohorts keeps increasing with large studies, there is a also a need for tools that allow results from automated image processing and analysis to be presented in a way that enables fast and efficient quality checking, tagging and reporting on cases in which automatic processing failed or was problematic. MilxXplore is an open source visualization platform, which provides an interface to navigate and explore imaging data in a web browser, giving the end user the opportunity to perform quality control and reporting in a user friendly, collaborative and efficient way. Compared to existing software solutions that often provide an overview of the results at the subject's level, MilxXplore pools the results of individual subjects and time points together, allowing easy and efficient navigation and browsing through the different acquisitions of a subject over time, and comparing the results against the rest of the population. MilxXplore is fast, flexible and allows remote quality checks of processed imaging data, facilitating data sharing and collaboration across multiple locations, and can be easily integrated into a cloud computing pipeline. With the growing trend of open data and open science, such a tool will become increasingly important to share and publish results of imaging analysis.

Towards open collaborative health informatics - The Role of free/libre open source principles. Contribution of the IMIA Open Source Health Informatics Working Group.

PubMed

Karopka, T; Schmuhl, H; Marcelo, A; Molin, J Dal; Wright, G

2011-01-01

: To analyze the contribution of Free/Libre Open Source Software in health care (FLOSS-HC) and to give perspectives for future developments. The paper summarizes FLOSS-related trends in health care as anticipated by members of the IMIA Open Source Working Group. Data were obtained through literature review and personal experience and observations of the authors in the last two decades. A status quo is given by a frequency analysis of the database of Medfloss.org, one of the world's largest platforms dedicated to FLOSS-HC. The authors discuss current problems in the field of health care and finally give a prospective roadmap, a projection of the potential influences of FLOSS in health care. FLOSS-HC already exists for more than 2 decades. Several projects have shown that FLOSS may produce highly competitive alternatives to proprietary solutions that are at least equivalent in usability and have a better total cost of ownership ratio. The Medfloss.org database currently lists 221 projects of diverse application types. FLOSS principles hold a great potential for addressing several of the most critical problems in health care IT. The authors argue that an ecosystem perspective is relevant and that FLOSS principles are best suited to create health IT systems that are able to evolve over time as medical knowledge, technologies, insights, workflows etc. continuously change. All these factors that inherently influence the development of health IT systems are changing at an ever growing pace. Traditional models of software engineering are not able to follow these changes and provide up-to-date systems for an acceptable cost/value ratio. To allow FLOSS to positively influence Health IT in the future a "FLOSS-friendly" environment has to be provided. Policy makers should resolve uncertainties in the legal framework that disfavor FLOSS. Certification procedures should be specified in a way that they do not raise additional barriers for FLOSS.

Open Access Research via Collaborative Educational Blogging: A Case Study from Library & Information Science

ERIC Educational Resources Information Center

Rebmann, Kristen Radsliff; Clark, Camden Bernard

2017-01-01

This article charts the development of activities for online graduate students in library and information science. Project goals include helping students develop competencies in understanding open access publishing, synthesizing research in the field, and engaging in scholarly communication via collaborative educational blogging. Using a design…

Virtual Labs (Science Gateways) as platforms for Free and Open Source Science

NASA Astrophysics Data System (ADS)

Lescinsky, David; Car, Nicholas; Fraser, Ryan; Friedrich, Carsten; Kemp, Carina; Squire, Geoffrey

2016-04-01

The Free and Open Source Software (FOSS) movement promotes community engagement in software development, as well as provides access to a range of sophisticated technologies that would be prohibitively expensive if obtained commercially. However, as geoinformatics and eResearch tools and services become more dispersed, it becomes more complicated to identify and interface between the many required components. Virtual Laboratories (VLs, also known as Science Gateways) simplify the management and coordination of these components by providing a platform linking many, if not all, of the steps in particular scientific processes. These enable scientists to focus on their science, rather than the underlying supporting technologies. We describe a modular, open source, VL infrastructure that can be reconfigured to create VLs for a wide range of disciplines. Development of this infrastructure has been led by CSIRO in collaboration with Geoscience Australia and the National Computational Infrastructure (NCI) with support from the National eResearch Collaboration Tools and Resources (NeCTAR) and the Australian National Data Service (ANDS). Initially, the infrastructure was developed to support the Virtual Geophysical Laboratory (VGL), and has subsequently been repurposed to create the Virtual Hazards Impact and Risk Laboratory (VHIRL) and the reconfigured Australian National Virtual Geophysics Laboratory (ANVGL). During each step of development, new capabilities and services have been added and/or enhanced. We plan on continuing to follow this model using a shared, community code base. The VL platform facilitates transparent and reproducible science by providing access to both the data and methodologies used during scientific investigations. This is further enhanced by the ability to set up and run investigations using computational resources accessed through the VL. Data is accessed using registries pointing to catalogues within public data repositories (notably including the NCI National Environmental Research Data Interoperability Platform), or by uploading data directly from user supplied addresses or files. Similarly, scientific software is accessed through registries pointing to software repositories (e.g., GitHub). Runs are configured by using or modifying default templates designed by subject matter experts. After the appropriate computational resources are identified by the user, Virtual Machines (VMs) are spun up and jobs are submitted to service providers (currently the NeCTAR public cloud or Amazon Web Services). Following completion of the jobs the results can be reviewed and downloaded if desired. By providing a unified platform for science, the VL infrastructure enables sophisticated provenance capture and management. The source of input data (including both collection and queries), user information, software information (version and configuration details) and output information are all captured and managed as a VL resource which can be linked to output data sets. This provenance resource provides a mechanism for publication and citation for Free and Open Source Science.

Talkoot Portals: Discover, Tag, Share, and Reuse Collaborative Science Workflows (Invited)

NASA Astrophysics Data System (ADS)

Wilson, B. D.; Ramachandran, R.; Lynnes, C.

2009-12-01

A small but growing number of scientists are beginning to harness Web 2.0 technologies, such as wikis, blogs, and social tagging, as a transformative way of doing science. These technologies provide researchers easy mechanisms to critique, suggest and share ideas, data and algorithms. At the same time, large suites of algorithms for science analysis are being made available as remotely-invokable Web Services, which can be chained together to create analysis workflows. This provides the research community an unprecedented opportunity to collaborate by sharing their workflows with one another, reproducing and analyzing research results, and leveraging colleagues’ expertise to expedite the process of scientific discovery. However, wikis and similar technologies are limited to text, static images and hyperlinks, providing little support for collaborative data analysis. A team of information technology and Earth science researchers from multiple institutions have come together to improve community collaboration in science analysis by developing a customizable “software appliance” to build collaborative portals for Earth Science services and analysis workflows. The critical requirement is that researchers (not just information technologists) be able to build collaborative sites around service workflows within a few hours. We envision online communities coming together, much like Finnish “talkoot” (a barn raising), to build a shared research space. Talkoot extends a freely available, open source content management framework with a series of modules specific to Earth Science for registering, creating, managing, discovering, tagging and sharing Earth Science web services and workflows for science data processing, analysis and visualization. Users will be able to author a “science story” in shareable web notebooks, including plots or animations, backed up by an executable workflow that directly reproduces the science analysis. New services and workflows of interest will be discoverable using tag search, and advertised using “service casts” and “interest casts” (Atom feeds). Multiple science workflow systems will be plugged into the system, with initial support for UAH’s Mining Workflow Composer and the open-source Active BPEL engine, and JPL’s SciFlo engine and the VizFlow visual programming interface. With the ability to share and execute analysis workflows, Talkoot portals can be used to do collaborative science in addition to communicate ideas and results. It will be useful for different science domains, mission teams, research projects and organizations. Thus, it will help to solve the “sociological” problem of bringing together disparate groups of researchers, and the technical problem of advertising, discovering, developing, documenting, and maintaining inter-agency science workflows. The presentation will discuss the goals of and barriers to Science 2.0, the social web technologies employed in the Talkoot software appliance (e.g. CMS, social tagging, personal presence, advertising by feeds, etc.), illustrate the resulting collaborative capabilities, and show early prototypes of the web interfaces (e.g. embedded workflows).

Collaboration-Centred Cities through Urban Apps Based on Open and User-Generated Data

PubMed Central

Aguilera, Unai; López-de-Ipiña, Diego; Pérez, Jorge

2016-01-01

This paper describes the IES Cities platform conceived to streamline the development of urban apps that combine heterogeneous datasets provided by diverse entities, namely, government, citizens, sensor infrastructure and other information data sources. This work pursues the challenge of achieving effective citizen collaboration by empowering them to prosume urban data across time. Particularly, this paper focuses on the query mapper; a key component of the IES Cities platform devised to democratize the development of open data-based mobile urban apps. This component allows developers not only to use available data, but also to contribute to existing datasets with the execution of SQL sentences. In addition, the component allows developers to create ad hoc storages for their applications, publishable as new datasets accessible by other consumers. As multiple users could be contributing and using a dataset, our solution also provides a data level permission mechanism to control how the platform manages the access to its datasets. We have evaluated the advantages brought forward by IES Cities from the developers’ perspective by describing an exemplary urban app created on top of it. In addition, we include an evaluation of the main functionalities of the query mapper. PMID:27376300

Collaboration-Centred Cities through Urban Apps Based on Open and User-Generated Data.

PubMed

Aguilera, Unai; López-de-Ipiña, Diego; Pérez, Jorge

2016-07-01

This paper describes the IES Cities platform conceived to streamline the development of urban apps that combine heterogeneous datasets provided by diverse entities, namely, government, citizens, sensor infrastructure and other information data sources. This work pursues the challenge of achieving effective citizen collaboration by empowering them to prosume urban data across time. Particularly, this paper focuses on the query mapper; a key component of the IES Cities platform devised to democratize the development of open data-based mobile urban apps. This component allows developers not only to use available data, but also to contribute to existing datasets with the execution of SQL sentences. In addition, the component allows developers to create ad hoc storages for their applications, publishable as new datasets accessible by other consumers. As multiple users could be contributing and using a dataset, our solution also provides a data level permission mechanism to control how the platform manages the access to its datasets. We have evaluated the advantages brought forward by IES Cities from the developers' perspective by describing an exemplary urban app created on top of it. In addition, we include an evaluation of the main functionalities of the query mapper.

2015 ESGF Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, D. N.

2015-06-22

The Earth System Grid Federation (ESGF) is a multi-agency, international collaboration whose purpose is to develop the software infrastructure needed to facilitate and empower the study of climate change on a global scale. ESGF’s architecture employs a system of geographically distributed peer nodes that are independently administered yet united by common federation protocols and application programming interfaces. The cornerstones of its interoperability are the peer-to-peer messaging, which is continuously exchanged among all nodes in the federation; a shared architecture for search and discovery; and a security infrastructure based on industry standards. ESGF integrates popular application engines available from the open-sourcemore » community with custom components (for data publishing, searching, user interface, security, and messaging) that were developed collaboratively by the team. The full ESGF infrastructure has now been adopted by multiple Earth science projects and allows access to petabytes of geophysical data, including the Coupled Model Intercomparison Project (CMIP)—output used by the Intergovernmental Panel on Climate Change assessment reports. ESGF is a successful example of integration of disparate open-source technologies into a cohesive functional system that serves the needs of the global climate science community.« less

Tritium autoradiography with thinned and back-side illuminated monolithic active pixel sensor device

NASA Astrophysics Data System (ADS)

Deptuch, G.

2005-05-01

The first autoradiographic results of the tritium ( 3H) marked source obtained with monolithic active pixel sensors are presented. The detector is a high-resolution, back-side illuminated imager, developed within the SUCIMA collaboration for low-energy (<30 keV) electrons detection. The sensitivity to these energies is obtained by thinning the detector, originally fabricated in the form of a standard VLSI chip, down to the thickness of the epitaxial layer. The detector used is the 1×10 6 pixel, thinned MIMOSA V chip. The low noise performance and thin (˜160 nm) entrance window provide the sensitivity of the device to energies as low as ˜4 keV. A polymer tritium source was parked directly atop the detector in open-air conditions. A real-time image of the source was obtained.

[Random Variable Read Me File

NASA Technical Reports Server (NTRS)

Teubert, Christopher; Sankararaman, Shankar; Cullo, Aiden

2017-01-01

Readme for the Random Variable Toolbox usable manner. is a Web-based Git version control repository hosting service. It is mostly used for computer code. It offers all of the distributed version control and source code management (SCM) functionality of Git as well as adding its own features. It provides access control and several collaboration features such as bug tracking, feature requests, task management, and wikis for every project.[3] GitHub offers both plans for private and free repositories on the same account[4] which are commonly used to host open-source software projects.[5] As of April 2017, GitHub reports having almost 20 million users and 57 million repositories,[6] making it the largest host of source code in the world.[7] GitHub has a mascot called Octocat, a cat with five tentacles and a human-like face

Linking genes to diseases with a SNPedia-Gene Wiki mashup

PubMed Central

2012-01-01

Background A variety of topic-focused wikis are used in the biomedical sciences to enable the mass-collaborative synthesis and distribution of diverse bodies of knowledge. To address complex problems such as defining the relationships between genes and disease, it is important to bring the knowledge from many different domains together. Here we show how advances in wiki technology and natural language processing can be used to automatically assemble ‘meta-wikis’ that present integrated views over the data collaboratively created in multiple source wikis. Results We produced a semantic meta-wiki called the Gene Wiki+ that automatically mirrors and integrates data from the Gene Wiki and SNPedia. The Gene Wiki+, available at (http://genewikiplus.org/), captures 8,047 distinct gene-disease relationships. SNPedia accounts for 4,149 of the gene-disease pairs, the Gene Wiki provides 4,377 and only 479 appear independently in both sources. All of this content is available to query and browse and is provided as linked open data. Conclusions Wikis contain increasing amounts of diverse, biological information useful for elucidating the connections between genes and disease. The Gene Wiki+ shows how wiki technology can be used in concert with natural language processing to provide integrated views over diverse underlying data sources. PMID:22541597

A Data Mining Approach to Reveal Representative Collaboration Indicators in Open Collaboration Frameworks

ERIC Educational Resources Information Center

Anaya, Antonio R.; Boticario, Jesus G.

2009-01-01

Data mining methods are successful in educational environments to discover new knowledge or learner skills or features. Unfortunately, they have not been used in depth with collaboration. We have developed a scalable data mining method, whose objective is to infer information on the collaboration during the collaboration process in a…

Building a world-wide open source community around a software framework: progress, dos, and don'ts

NASA Astrophysics Data System (ADS)

Ibsen, Jorge; Antognini, Jonathan; Avarias, Jorge; Caproni, Alessandro; Fuessling, Matthias; Gimenez, Guillermo; Verma, Khushbu; Mora, Matias; Schwarz, Joseph; Staig, Tomás.

2016-08-01

As we all know too well, building up a collaborative community around a software infrastructure is not easy. Besides recruiting enthusiasts to work as part of it, mostly for free, to succeed you also need to overcome a number of technical, sociological, and, to our surprise, some political hurdles. The ALMA Common Software (ACS) was developed at ESO and partner institutions over the course of more than 10 years. While it was mainly intended for the ALMA Observatory, it was early on thought as a generic distributed control framework. ACS has been periodically released to the public through an LGPL license, which encouraged around a dozen non-ALMA institutions to make use of ACS for both industrial and educational applications. In recent years, the Cherenkov Telescope Array and the LLAMA Observatory have also decided to adopt the framework for their own control systems. The aim of the "ACS Community" is to support independent initiatives in making use of the ACS framework and to further contribute to its development. The Community provides access to a growing network of volunteers eager to develop ACS in areas that are not necessarily in ALMA's interests, and/or were not within the original system scope. Current examples are: support for additional OS platforms, extension of supported hardware interfaces, a public code repository and a build farm. The ACS Community makes use of existing collaborations with Chilean and Brazilian universities, reaching out to promising engineers in the making. At the same time, projects actively using ACS have committed valuable resources to assist the Community's work. Well established training programs like the ACS Workshops are also being continued through the Community's work. This paper aims to give a detailed account of the ongoing (second) journey towards establishing a world-wide open source collaboration around ACS. The ACS Community is growing into a horizontal partnership across a decentralized and diversified group of actors, and we are excited about its technical and human potential.

Multidisciplinary Analysis and Optimization Generation 1 and Next Steps

NASA Technical Reports Server (NTRS)

Naiman, Cynthia Gutierrez

2008-01-01

The Multidisciplinary Analysis & Optimization Working Group (MDAO WG) of the Systems Analysis Design & Optimization (SAD&O) discipline in the Fundamental Aeronautics Program s Subsonic Fixed Wing (SFW) project completed three major milestones during Fiscal Year (FY)08: "Requirements Definition" Milestone (1/31/08); "GEN 1 Integrated Multi-disciplinary Toolset" (Annual Performance Goal) (6/30/08); and "Define Architecture & Interfaces for Next Generation Open Source MDAO Framework" Milestone (9/30/08). Details of all three milestones are explained including documentation available, potential partner collaborations, and next steps in FY09.

Engaging the public in the nascent era of gravitational-wave astronomy

NASA Astrophysics Data System (ADS)

Hendry, Martin A.

2015-08-01

Within the next few years a global network of ground-based laser interferometers will become fully operational. These ultra-sensitive instruments are confidently expected to directly detect gravitational waves from astrophysical sources before the end of the decade. In anticipation of opening this entirely new window on the Universe, the LIGO (Laser Interferometer Gravitational Wave Observatory) Scientific Collaboration has recently developed a substantive program of education and public outreach activities that includes exhibitions, documentary films, social media and interactive games - as well as more traditional modes of science communication such as schools and public lectures.As the gravitational wave 'detection era' unfolds over the next decade, it will present exciting challenges for future public engagement by the LIGO Scientific Collaboration and by other gravitational-wave astronomy collaborations around the world. Perhaps the most interesting opportunities will be in the area of citizen science, building upon the infrastructure already being developed through e.g. the LIGO Open Science Center (see arXiv:1410.4839) and the remarkable success of the Einstein@Home project (www.einsteinathome.org).In this presentation I will give an overview of the LSC education and public outreach program, highlighting its goals, major successes and future strategy - particularly in relation to the release of future LIGO and other gravitational wave datasets to the scientific community and to the public, and the opportunities this will present for directly engaging citizen scientists in this exciting new field of observational astronomy.

Professionals learning together with patients: An exploratory study of a collaborative learning Fellowship programme for healthcare improvement.

PubMed

Myron, Rowan; French, Catherine; Sullivan, Paul; Sathyamoorthy, Ganesh; Barlow, James; Pomeroy, Linda

2018-05-01

Improving the quality of healthcare involves collaboration between many different stakeholders. Collaborative learning theory suggests that teaching different professional groups alongside each other may enable them to develop skills in how to collaborate effectively, but there is little literature on how this works in practice. Further, though it is recognised that patients play a fundamental role in quality improvement, there are few examples of where they learn together with professionals. To contribute to addressing this gap, we review a collaborative fellowship in Northwest London, designed to build capacity to improve healthcare, which enabled patients and professionals to learn together. Using the lens of collaborative learning, we conducted an exploratory study of six cohorts of the year long programme (71 participants). Data were collected using open text responses from an online survey (n = 31) and semi-structured interviews (n = 34) and analysed using an inductive open coding approach. The collaborative design of the Fellowship, which included bringing multiple perspectives to discussions of real world problems, was valued by participants who reflected on the safe, egalitarian space created by the programme. Participants (healthcare professionals and patients) found this way of learning initially challenging yet ultimately productive. Despite the pedagogical and practical challenges of developing a collaborative programme, this study indicates that opening up previously restricted learning opportunities as widely as possible, to include patients and carers, is an effective mechanism to develop collaborative skills for quality improvement.

The Knowledge Web: Learning and Collaborating on the Net. Open and Distance Learning Series.

ERIC Educational Resources Information Center

Eisenstadt, Marc, Ed.; Vincent, Tom, Ed.

This book contains a collection of examples of new and effective uses of the World Wide Web in education from the Knowledge Media Institute (KMi) at the Open University (Great Britain). The publication is organized in three main sections--"Learning Media,""Collaboration and Presence," and "Knowledge Systems on the…

The Role of Language and Culture in Open Learning in International Collaborative Programmes

ERIC Educational Resources Information Center

Scarino, Angela; Crichton, Jonathan; Woods, Megan

2007-01-01

In the context of internationalisation, the delivery of higher education programmes increasingly combines open learning with collaborations among people of diverse languages and cultures. In this paper we argue that while the literature on international education focuses on mapping modes of delivery in international education, there is also a need…

TH-C-12A-12: Veritas: An Open Source Tool to Facilitate User Interaction with TrueBeam Developer Mode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mishra, P; Varian Medical Systems, Palo Alto, CA; Lewis, J

2014-06-15

Purpose: To address the challenges of creating delivery trajectories and imaging sequences with TrueBeam Developer Mode, a new open-source graphical XML builder, Veritas, has been developed, tested and made freely available. Veritas eliminates most of the need to understand the underlying schema and write XML scripts, by providing a graphical menu for each control point specifying the state of 30 mechanical/dose axes. All capabilities of Developer Mode are accessible in Veritas. Methods: Veritas was designed using QT Designer, a ‘what-you-is-what-you-get’ (WYSIWIG) tool for building graphical user interfaces (GUI). Different components of the GUI are integrated using QT's signals and slotsmore » mechanism. Functionalities are added using PySide, an open source, cross platform Python binding for the QT framework. The XML code generated is immediately visible, making it an interactive learning tool. A user starts from an anonymized DICOM file or XML example and introduces delivery modifications, or begins their experiment from scratch, then uses the GUI to modify control points as desired. The software automatically generates XML plans following the appropriate schema. Results: Veritas was tested by generating and delivering two XML plans at Brigham and Women's Hospital. The first example was created to irradiate the letter ‘B’ with a narrow MV beam using dynamic couch movements. The second was created to acquire 4D CBCT projections for four minutes. The delivery of the letter ‘B’ was observed using a 2D array of ionization chambers. Both deliveries were generated quickly in Veritas by non-expert Developer Mode users. Conclusion: We introduced a new open source tool Veritas for generating XML plans (delivery trajectories and imaging sequences). Veritas makes Developer Mode more accessible by reducing the learning curve for quick translation of research ideas into XML plans. Veritas is an open source initiative, creating the possibility for future developments and collaboration with other researchers. I am an employee of Varian Medical Systems.« less

Supporting Awareness for Augmenting Participation in Collaborative Learning.

ERIC Educational Resources Information Center

Ogata, Hiroaki; Yano, Yoneo

This paper describes Coconuts (Concurrent Collaborative Learning Environment Supported by Awareness), a proposed module of Sharlok (Sharing, Linking and Looking-for Knowledge), an open-ended and collaborative learning environment that integrates a knowledge building tool with a collaborative interface tool. Coconuts was developed in order to…

Open Innovation Challenge in Healthcare. Role for Education.

PubMed

Dimitriu, Rodica; Lungeanu, Diana; Mãnescu, Cristina; Pantazi, Mirela; Mihalas, George I

2015-01-01

The vision of this paper is that collaboration creates new openings for engagement of non-commercial actors, such as universities, in innovation networks on the one hand, while opening up for collaborative innovation, and getting valuable real life anchors on the other hand, all these underpinned by greater connectivity and globalization. We present our approach in re-designing the courses on medical informatics and data processing to meet these challenges by employing public Internet services and media facilitation.

Crowd Sourcing for Challenging Technical Problems and Business Model

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; Richard, Elizabeth

2011-01-01

Crowd sourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by an organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the Space Life Sciences Directorate (SLSD), with the support of Wyle Integrated Science and Engineering, established and implemented pilot projects in open innovation (crowd sourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, also called "Challenges" or "Technical Needs" by the various open innovation service providers, and were then posted externally to seek solutions. In addition, an open call was issued internally to NASA employees Agency wide (10 Field Centers and NASA HQ) using an open innovation service provider crowd sourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, Yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowd sourcing platform designed for internal use by an organization. This platform was customized for NASA use and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging. Similarly, the TopCoder challenge yielded an optimization algorithm for designing a lunar medical kit. The Yet2.com challenges yielded many new industry and academic contacts in bone imaging, microbial detection and even the use of pharmaceuticals for radiation protection. The internal challenges through NASA@Work drew over 6000 participants across all NASA centers. Challenges conducted by each NASA center elicited ideas and solutions from several other NASA centers and demonstrated rapid and efficient participation from employees at multiple centers to contribute to problem solving. Finally, on January 19, 2011, the SLSD conducted a workshop on open collaboration and innovation strategies and best practices through the newly established NASA Human Health and Performance Center (NHHPC). Initial projects will be described leading to a new business model for SLSD.

Scaling Critical Zone analysis tasks from desktop to the cloud utilizing contemporary distributed computing and data management approaches: A case study for project based learning of Cyberinfrastructure concepts

NASA Astrophysics Data System (ADS)

Swetnam, T. L.; Pelletier, J. D.; Merchant, N.; Callahan, N.; Lyons, E.

2015-12-01

Earth science is making rapid advances through effective utilization of large-scale data repositories such as aerial LiDAR and access to NSF-funded cyberinfrastructures (e.g. the OpenTopography.org data portal, iPlant Collaborative, and XSEDE). Scaling analysis tasks that are traditionally developed using desktops, laptops or computing clusters to effectively leverage national and regional scale cyberinfrastructure pose unique challenges and barriers to adoption. To address some of these challenges in Fall 2014 an 'Applied Cyberinfrastructure Concepts' a project-based learning course (ISTA 420/520) at the University of Arizona focused on developing scalable models of 'Effective Energy and Mass Transfer' (EEMT, MJ m-2 yr-1) for use by the NSF Critical Zone Observatories (CZO) project. EEMT is a quantitative measure of the flux of available energy to the critical zone, and its computation involves inputs that have broad applicability (e.g. solar insolation). The course comprised of 25 students with varying level of computational skills and with no prior domain background in the geosciences, collaborated with domain experts to develop the scalable workflow. The original workflow relying on open-source QGIS platform on a laptop was scaled to effectively utilize cloud environments (Openstack), UA Campus HPC systems, iRODS, and other XSEDE and OSG resources. The project utilizes public data, e.g. DEMs produced by OpenTopography.org and climate data from Daymet, which are processed using GDAL, GRASS and SAGA and the Makeflow and Work-queue task management software packages. Students were placed into collaborative groups to develop the separate aspects of the project. They were allowed to change teams, alter workflows, and design and develop novel code. The students were able to identify all necessary dependencies, recompile source onto the target execution platforms, and demonstrate a functional workflow, which was further improved upon by one of the group leaders over Spring 2015. All of the code, documentation and workflow description are currently available on GitHub and a public data portal is in development. We present a case study of how students reacted to the challenge of a real science problem, their interactions with end-users, what went right, and what could be done better in the future.

GABBs: Cyberinfrastructure for Self-Service Geospatial Data Exploration, Computation, and Sharing

NASA Astrophysics Data System (ADS)

Song, C. X.; Zhao, L.; Biehl, L. L.; Merwade, V.; Villoria, N.

2016-12-01

Geospatial data are present everywhere today with the proliferation of location-aware computing devices. This is especially true in the scientific community where large amounts of data are driving research and education activities in many domains. Collaboration over geospatial data, for example, in modeling, data analysis and visualization, must still overcome the barriers of specialized software and expertise among other challenges. In addressing these needs, the Geospatial data Analysis Building Blocks (GABBs) project aims at building geospatial modeling, data analysis and visualization capabilities in an open source web platform, HUBzero. Funded by NSF's Data Infrastructure Building Blocks initiative, GABBs is creating a geospatial data architecture that integrates spatial data management, mapping and visualization, and interfaces in the HUBzero platform for scientific collaborations. The geo-rendering enabled Rappture toolkit, a generic Python mapping library, geospatial data exploration and publication tools, and an integrated online geospatial data management solution are among the software building blocks from the project. The GABBS software will be available through Amazon's AWS Marketplace VM images and open source. Hosting services are also available to the user community. The outcome of the project will enable researchers and educators to self-manage their scientific data, rapidly create GIS-enable tools, share geospatial data and tools on the web, and build dynamic workflows connecting data and tools, all without requiring significant software development skills, GIS expertise or IT administrative privileges. This presentation will describe the GABBs architecture, toolkits and libraries, and showcase the scientific use cases that utilize GABBs capabilities, as well as the challenges and solutions for GABBs to interoperate with other cyberinfrastructure platforms.

Towards Collaboration as Learning: Evaluation of an Open CPD Opportunity for HE Teachers

ERIC Educational Resources Information Center

Nerantzi, Chrissi; Gossman, Peter

2015-01-01

Flexible, Distance and Online Learning (FDOL) is an open online course offered as an informal cross-institutional collaboration based on a postgraduate module in the context of teacher education in higher education. The second iteration, FDOL132, was offered in 2013 using a problem-based learning (PBL) design (FISh) to foster collaborative…

Client-side Medical Image Colorization in a Collaborative Environment.

PubMed

Virag, Ioan; Stoicu-Tivadar, Lăcrămioara; Crişan-Vida, Mihaela

2015-01-01

The paper presents an application related to collaborative medicine using a browser based medical visualization system with focus on the medical image colorization process and the underlying open source web development technologies involved. Browser based systems allow physicians to share medical data with their remotely located counterparts or medical students, assisting them during patient diagnosis, treatment monitoring, surgery planning or for educational purposes. This approach brings forth the advantage of ubiquity. The system can be accessed from a any device, in order to process the images, assuring the independence towards having a specific proprietary operating system. The current work starts with processing of DICOM (Digital Imaging and Communications in Medicine) files and ends with the rendering of the resulting bitmap images on a HTML5 (fifth revision of the HyperText Markup Language) canvas element. The application improves the image visualization emphasizing different tissue densities.

Scalable Collaborative Infrastructure for a Learning Healthcare System (SCILHS): Architecture

PubMed Central

Mandl, Kenneth D; Kohane, Isaac S; McFadden, Douglas; Weber, Griffin M; Natter, Marc; Mandel, Joshua; Schneeweiss, Sebastian; Weiler, Sarah; Klann, Jeffrey G; Bickel, Jonathan; Adams, William G; Ge, Yaorong; Zhou, Xiaobo; Perkins, James; Marsolo, Keith; Bernstam, Elmer; Showalter, John; Quarshie, Alexander; Ofili, Elizabeth; Hripcsak, George; Murphy, Shawn N

2014-01-01

We describe the architecture of the Patient Centered Outcomes Research Institute (PCORI) funded Scalable Collaborative Infrastructure for a Learning Healthcare System (SCILHS, http://www.SCILHS.org) clinical data research network, which leverages the $48 billion dollar federal investment in health information technology (IT) to enable a queryable semantic data model across 10 health systems covering more than 8 million patients, plugging universally into the point of care, generating evidence and discovery, and thereby enabling clinician and patient participation in research during the patient encounter. Central to the success of SCILHS is development of innovative ‘apps’ to improve PCOR research methods and capacitate point of care functions such as consent, enrollment, randomization, and outreach for patient-reported outcomes. SCILHS adapts and extends an existing national research network formed on an advanced IT infrastructure built with open source, free, modular components. PMID:24821734

Software Management for the NOνAExperiment

NASA Astrophysics Data System (ADS)

Davies, G. S.; Davies, J. P.; C Group; Rebel, B.; Sachdev, K.; Zirnstein, J.

2015-12-01

The NOvAsoftware (NOνASoft) is written in C++, and built on the Fermilab Computing Division's art framework that uses ROOT analysis software. NOνASoftmakes use of more than 50 external software packages, is developed by more than 50 developers and is used by more than 100 physicists from over 30 universities and laboratories in 3 continents. The software builds are handled by Fermilab's custom version of Software Release Tools (SRT), a UNIX based software management system for large, collaborative projects that is used by several experiments at Fermilab. The system provides software version control with SVN configured in a client-server mode and is based on the code originally developed by the BaBar collaboration. In this paper, we present efforts towards distributing the NOvA software via the CernVM File System distributed file system. We will also describe our recent work to use a CMake build system and Jenkins, the open source continuous integration system, for NOνASoft.

Transitions theory: a trajectory of theoretical development in nursing.

PubMed

Im, Eun-Ok

2011-01-01

There have been very few investigations into how any single nursing theory has actually evolved historically. In this paper, a trajectory of theoretical development in nursing is explored through reviewing the theoretical development of a single nursing theory-transitions theory. The literature related to transitions theory was searched and retrieved using multiple databases. Ninety-nine papers were analyzed according to type of theory, populations of interest, sources of theorizing, and theoretical methods. Transitions theory originated in research but was initially borrowed. It also arose in research with immigrants and from national and international collaborative research efforts. A product of mentoring, transitions theory is used widely in nursing education, research, and practice. Diverse thoughts related to transitions theory coexist. For future theoretical development in nursing, we need to remain open to new ideas and continue to engage in multiple collaborative efforts. Copyright © 2011 Elsevier Inc. All rights reserved.

NOAA Inter-Agency Networking for Open Data and Research Results

NASA Astrophysics Data System (ADS)

de la Beaujardiere, J.

2015-12-01

The US National Oceanic and Atmospheric Administration (NOAA) generates tens of terabytes of data per day from hundreds of sensors on satellites, radars, aircraft, ships, and buoys, and from numerical models. With rare exceptions, all of these data should be made publicly accessible in a usable fashion. NOAA has long been both an advocate and a practitioner of open data, and has observations going back 150 years in its archives. The NOAA data management community therefore welcomed the White House mandates on Open Data and Open Research, and has striven to improve standardization internally and in collaboration with other organizations. This paper will summarize the state of inter-agency networking by NOAA, and will discuss future perspectives, in particular the need to achieve a state where the appropriate technology choices for particular classes of geospatial data are obvious and beyond discussion, and where data sharing and metadata creation are built into agency workflows for project planning, approval, and execution, so that instead of writing and enforcing mandates we can focus on actually using data from multiple sources to improve understanding and decision-making.

Open Source software and social networks: disruptive alternatives for medical imaging.

PubMed

Ratib, Osman; Rosset, Antoine; Heuberger, Joris

2011-05-01

In recent decades several major changes in computer and communication technology have pushed the limits of imaging informatics and PACS beyond the traditional system architecture providing new perspectives and innovative approach to a traditionally conservative medical community. Disruptive technologies such as the world-wide-web, wireless networking, Open Source software and recent emergence of cyber communities and social networks have imposed an accelerated pace and major quantum leaps in the progress of computer and technology infrastructure applicable to medical imaging applications. This paper reviews the impact and potential benefits of two major trends in consumer market software development and how they will influence the future of medical imaging informatics. Open Source software is emerging as an attractive and cost effective alternative to traditional commercial software developments and collaborative social networks provide a new model of communication that is better suited to the needs of the medical community. Evidence shows that successful Open Source software tools have penetrated the medical market and have proven to be more robust and cost effective than their commercial counterparts. Developed by developers that are themselves part of the user community, these tools are usually better adapted to the user's need and are more robust than traditional software programs being developed and tested by a large number of contributing users. This context allows a much faster and more appropriate development and evolution of the software platforms. Similarly, communication technology has opened up to the general public in a way that has changed the social behavior and habits adding a new dimension to the way people communicate and interact with each other. The new paradigms have also slowly penetrated the professional market and ultimately the medical community. Secure social networks allowing groups of people to easily communicate and exchange information is a new model that is particularly suitable for some specific groups of healthcare professional and for physicians. It has also changed the expectations of how patients wish to communicate with their physicians. Emerging disruptive technologies and innovative paradigm such as Open Source software are leading the way to a new generation of information systems that slowly will change the way physicians and healthcare providers as well as patients will interact and communicate in the future. The impact of these new technologies is particularly effective in image communication, PACS and teleradiology. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

gemcWeb: A Cloud Based Nuclear Physics Simulation Software

NASA Astrophysics Data System (ADS)

Markelon, Sam

2017-09-01

gemcWeb allows users to run nuclear physics simulations from the web. Being completely device agnostic, scientists can run simulations from anywhere with an Internet connection. Having a full user system, gemcWeb allows users to revisit and revise their projects, and share configurations and results with collaborators. gemcWeb is based on simulation software gemc, which is based on standard GEant4. gemcWeb requires no C++, gemc, or GEant4 knowledge. Using a simple but powerful GUI allows users to configure their project from geometries and configurations stored on the deployment server. Simulations are then run on the server, with results being posted to the user, and then securely stored. Python based and open-source, the main version of gemcWeb is hosted internally at Jefferson National Labratory and used by the CLAS12 and Electron-Ion Collider Project groups. However, as the software is open-source, and hosted as a GitHub repository, an instance can be deployed on the open web, or any institution's intra-net. An instance can be configured to host experiments specific to an institution, and the code base can be modified by any individual or group. Special thanks to: Maurizio Ungaro, PhD., creator of gemc; Markus Diefenthaler, PhD., advisor; and Kyungseon Joo, PhD., advisor.

The image-guided surgery toolkit IGSTK: an open source C++ software toolkit.

PubMed

Enquobahrie, Andinet; Cheng, Patrick; Gary, Kevin; Ibanez, Luis; Gobbi, David; Lindseth, Frank; Yaniv, Ziv; Aylward, Stephen; Jomier, Julien; Cleary, Kevin

2007-11-01

This paper presents an overview of the image-guided surgery toolkit (IGSTK). IGSTK is an open source C++ software library that provides the basic components needed to develop image-guided surgery applications. It is intended for fast prototyping and development of image-guided surgery applications. The toolkit was developed through a collaboration between academic and industry partners. Because IGSTK was designed for safety-critical applications, the development team has adopted lightweight software processes that emphasizes safety and robustness while, at the same time, supporting geographically separated developers. A software process that is philosophically similar to agile software methods was adopted emphasizing iterative, incremental, and test-driven development principles. The guiding principle in the architecture design of IGSTK is patient safety. The IGSTK team implemented a component-based architecture and used state machine software design methodologies to improve the reliability and safety of the components. Every IGSTK component has a well-defined set of features that are governed by state machines. The state machine ensures that the component is always in a valid state and that all state transitions are valid and meaningful. Realizing that the continued success and viability of an open source toolkit depends on a strong user community, the IGSTK team is following several key strategies to build an active user community. These include maintaining a users and developers' mailing list, providing documentation (application programming interface reference document and book), presenting demonstration applications, and delivering tutorial sessions at relevant scientific conferences.

An Open Source Business Model for Malaria

PubMed Central

Årdal, Christine; Røttingen, John-Arne

2015-01-01

Greater investment is required in developing new drugs and vaccines against malaria in order to eradicate malaria. These precious funds must be carefully managed to achieve the greatest impact. We evaluate existing efforts to discover and develop new drugs and vaccines for malaria to determine how best malaria R&D can benefit from an enhanced open source approach and how such a business model may operate. We assess research articles, patents, clinical trials and conducted a smaller survey among malaria researchers. Our results demonstrate that the public and philanthropic sectors are financing and performing the majority of malaria drug/vaccine discovery and development, but are then restricting access through patents, ‘closed’ publications and hidden away physical specimens. This makes little sense since it is also the public and philanthropic sector that purchases the drugs and vaccines. We recommend that a more “open source” approach is taken by making the entire value chain more efficient through greater transparency which may lead to more extensive collaborations. This can, for example, be achieved by empowering an existing organization like the Medicines for Malaria Venture (MMV) to act as a clearing house for malaria-related data. The malaria researchers that we surveyed indicated that they would utilize such registry data to increase collaboration. Finally, we question the utility of publicly or philanthropically funded patents for malaria medicines, where little to no profits are available. Malaria R&D benefits from a publicly and philanthropically funded architecture, which starts with academic research institutions, product development partnerships, commercialization assistance through UNITAID and finally procurement through mechanisms like The Global Fund to Fight AIDS, Tuberculosis and Malaria and the U.S.’ President’s Malaria Initiative. We believe that a fresh look should be taken at the cost/benefit of patents particularly related to new malaria medicines and consider alternative incentives, like WHO prequalification. PMID:25658590

The OpenPlanetary initiative

NASA Astrophysics Data System (ADS)

Manaud, Nicolas; Rossi, Angelo Pio; Hare, Trent; Aye, Michael; Galluzzi, Valentina; van Gasselt, Stephan; Martinez, Santa; McAuliffe, Jonathan; Million, Chase; Nass, Andrea; Zinzi, Angelo

2016-10-01

"Open" has become attached to several concepts: science, data, and software are some of the most obvious. It is already common practice within the planetary science community to share spacecraft missions data freely and openly [1]. However, this is not historically the case for software tools, source code, and derived data sets, which are often reproduced independently by multiple individuals and groups. Sharing data, tools and overall knowledge would increase scientific return and benefits [e.g. 2], and recent projects and initiatives are helping toward this goal [e.g. 3,4,5,6].OpenPlanetary is a bottom-up initiative to address the need of the planetary science community for sharing ideas and collaborating on common planetary research and data analysis problems, new challenges, and opportunities. It started from an initial participants effort to stay connected and share information related to and beyond the ESA's first Planetary GIS Workshop [7]. It then continued during the 2nd (US) Planetary Data Workshop [8], and aggregated more people.Our objective is to build an online distributed framework enabling open collaborations within the planetary science community. We aim to co-create, curate and publish resource materials and data sets; to organise online events, to support community-based projects development; and to offer a real-time communication channel at and between conferences and workshops.We will present our current framework and resources, developing projects and ideas, and solicit for feedback and participation. OpenPlanetary is intended for research and education professionals: scientists, engineers, designers, teachers and students, as well as the general public that includes enthusiasts and citizen scientists. All are welcome to join and contribute at openplanetary.co[1] International Planetary Data Alliance, planetarydata.org. [2] Nosek et al (2015), dx.doi.org/10.1126/science.aab2374. [3] Erard S. et al. (2016), EGU2016-17527. [4] Proposal for a PDS Software Node, bit.ly/PDS_SN. [5] Zinzi et al. (2016), dx.doi.org/10.1016/j.ascom.2016.02.006. [6] Open Universe initiave, bit.ly/OpenUniverse, [7] Manaud N. et al. (2016), LPSC47-1387. [8] bit.ly/PlanetaryDataWorkshops

Mocking the weak lensing universe: The LensTools Python computing package

NASA Astrophysics Data System (ADS)

Petri, A.

2016-10-01

We present a newly developed software package which implements a wide range of routines frequently used in Weak Gravitational Lensing (WL). With the continuously increasing size of the WL scientific community we feel that easy to use Application Program Interfaces (APIs) for common calculations are a necessity to ensure efficiency and coordination across different working groups. Coupled with existing open source codes, such as CAMB (Lewis et al., 2000) and Gadget2 (Springel, 2005), LensTools brings together a cosmic shear simulation pipeline which, complemented with a variety of WL feature measurement tools and parameter sampling routines, provides easy access to the numerics for theoretical studies of WL as well as for experiment forecasts. Being implemented in PYTHON (Rossum, 1995), LensTools takes full advantage of a range of state-of-the art techniques developed by the large and growing open-source software community (Jones et al., 2001; McKinney, 2010; Astrophy Collaboration, 2013; Pedregosa et al., 2011; Foreman-Mackey et al., 2013). We made the LensTools code available on the Python Package Index and published its documentation on http://lenstools.readthedocs.io.

Experiences with a researcher-centric ELN† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c4sc02128b Click here for additional data file.

PubMed Central

Badiola, Katrina A.; Bird, Colin; Brocklesby, William S.; Casson, John; Chapman, Richard T.; Coles, Simon J.; Cronshaw, James R.; Fisher, Adam; Gloria, Danmar; Grossel, Martin C.; Hibbert, D. Brynn; Knight, Nicola; Mapp, Lucy K.; Marazzi, Luke; Matthews, Brian; Milsted, Andy; Minns, Russell S.; Mueller, Karl T.; Murphy, Kelly; Parkinson, Tim; Quinnell, Rosanne; Robinson, John S.; Robertson, Murray N.; Robins, Michael; Springate, Emma; Tizzard, Graham; Todd, Matthew H.; Williamson, Alice E.; Willoughby, Cerys; Yang, Erica; Ylioja, Paul M.

2015-01-01

Electronic Laboratory Notebooks (ELNs) are progressively replacing traditional paper books in both commercial research establishments and academic institutions. University researchers require specific features from ELNs, given the need to promote cross-institutional collaborative working, to enable the sharing of procedures and results, and to facilitate publication. The LabTrove ELN, which we use as our exemplar, was designed to be researcher-centric (i.e., not only aimed at the individual researcher's basic needs rather than to a specific institutional or subject or disciplinary agenda, but also able to be tailored because it is open source). LabTrove is being used in a heterogeneous set of academic laboratories, for a range of purposes, including analytical chemistry, X-ray studies, drug discovery and a biomaterials project. Researchers use the ELN for recording experiments, preserving data collected, and for project coordination. This perspective article describes the experiences of those researchers from several viewpoints, demonstrating how a web-based open source electronic notebook can meet the diverse needs of academic researchers. PMID:29308130

CFHT data processing and calibration ESPaDOnS pipeline: Upena and OPERA (optical spectropolarimetry)

NASA Astrophysics Data System (ADS)

Martioli, Eder; Teeple, D.; Manset, Nadine

2011-03-01

CFHT is ESPaDOnS responsible for processing raw images, removing instrument related artifacts, and delivering science-ready data to the PIs. Here we describe the Upena pipeline, which is the software used to reduce the echelle spectro-polarimetric data obtained with the ESPaDOnS instrument. Upena is an automated pipeline that performs calibration and reduction of raw images. Upena has the capability of both performing real-time image-by-image basis reduction and a post observing night complete reduction. Upena produces polarization and intensity spectra in FITS format. The pipeline is designed to perform parallel computing for improved speed, which assures that the final products are delivered to the PIs before noon HST after each night of observations. We also present the OPERA project, which is an open-source pipeline to reduce ESPaDOnS data that will be developed as a collaborative work between CFHT and the scientific community. OPERA will match the core capabilities of Upena and in addition will be open-source, flexible and extensible.

MilxXplore: a web-based system to explore large imaging datasets

PubMed Central

Bourgeat, P; Dore, V; Villemagne, V L; Rowe, C C; Salvado, O; Fripp, J

2013-01-01

Objective As large-scale medical imaging studies are becoming more common, there is an increasing reliance on automated software to extract quantitative information from these images. As the size of the cohorts keeps increasing with large studies, there is a also a need for tools that allow results from automated image processing and analysis to be presented in a way that enables fast and efficient quality checking, tagging and reporting on cases in which automatic processing failed or was problematic. Materials and methods MilxXplore is an open source visualization platform, which provides an interface to navigate and explore imaging data in a web browser, giving the end user the opportunity to perform quality control and reporting in a user friendly, collaborative and efficient way. Discussion Compared to existing software solutions that often provide an overview of the results at the subject's level, MilxXplore pools the results of individual subjects and time points together, allowing easy and efficient navigation and browsing through the different acquisitions of a subject over time, and comparing the results against the rest of the population. Conclusions MilxXplore is fast, flexible and allows remote quality checks of processed imaging data, facilitating data sharing and collaboration across multiple locations, and can be easily integrated into a cloud computing pipeline. With the growing trend of open data and open science, such a tool will become increasingly important to share and publish results of imaging analysis. PMID:23775173

Open Governance in Higher Education: Extending the Past to the Future

ERIC Educational Resources Information Center

Masson, Patrick

2011-01-01

Open educational resources, open content, open access, open research, open courseware--all of these open initiatives share, and benefit from, a vision of access and a collaborative framework that often result in improved outcomes. Many of these open initiatives have gained adoption within higher education and are now serving in mission-critical…

Wiki surveys: open and quantifiable social data collection.

PubMed

Salganik, Matthew J; Levy, Karen E C

2015-01-01

In the social sciences, there is a longstanding tension between data collection methods that facilitate quantification and those that are open to unanticipated information. Advances in technology now enable new, hybrid methods that combine some of the benefits of both approaches. Drawing inspiration from online information aggregation systems like Wikipedia and from traditional survey research, we propose a new class of research instruments called wiki surveys. Just as Wikipedia evolves over time based on contributions from participants, we envision an evolving survey driven by contributions from respondents. We develop three general principles that underlie wiki surveys: they should be greedy, collaborative, and adaptive. Building on these principles, we develop methods for data collection and data analysis for one type of wiki survey, a pairwise wiki survey. Using two proof-of-concept case studies involving our free and open-source website www.allourideas.org, we show that pairwise wiki surveys can yield insights that would be difficult to obtain with other methods.

Wiki Surveys: Open and Quantifiable Social Data Collection

PubMed Central

Salganik, Matthew J.; Levy, Karen E. C.

2015-01-01

In the social sciences, there is a longstanding tension between data collection methods that facilitate quantification and those that are open to unanticipated information. Advances in technology now enable new, hybrid methods that combine some of the benefits of both approaches. Drawing inspiration from online information aggregation systems like Wikipedia and from traditional survey research, we propose a new class of research instruments called wiki surveys. Just as Wikipedia evolves over time based on contributions from participants, we envision an evolving survey driven by contributions from respondents. We develop three general principles that underlie wiki surveys: they should be greedy, collaborative, and adaptive. Building on these principles, we develop methods for data collection and data analysis for one type of wiki survey, a pairwise wiki survey. Using two proof-of-concept case studies involving our free and open-source website www.allourideas.org, we show that pairwise wiki surveys can yield insights that would be difficult to obtain with other methods. PMID:25992565

The Bioperl Toolkit: Perl Modules for the Life Sciences

PubMed Central

Stajich, Jason E.; Block, David; Boulez, Kris; Brenner, Steven E.; Chervitz, Stephen A.; Dagdigian, Chris; Fuellen, Georg; Gilbert, James G.R.; Korf, Ian; Lapp, Hilmar; Lehväslaiho, Heikki; Matsalla, Chad; Mungall, Chris J.; Osborne, Brian I.; Pocock, Matthew R.; Schattner, Peter; Senger, Martin; Stein, Lincoln D.; Stupka, Elia; Wilkinson, Mark D.; Birney, Ewan

2002-01-01

The Bioperl project is an international open-source collaboration of biologists, bioinformaticians, and computer scientists that has evolved over the past 7 yr into the most comprehensive library of Perl modules available for managing and manipulating life-science information. Bioperl provides an easy-to-use, stable, and consistent programming interface for bioinformatics application programmers. The Bioperl modules have been successfully and repeatedly used to reduce otherwise complex tasks to only a few lines of code. The Bioperl object model has been proven to be flexible enough to support enterprise-level applications such as EnsEMBL, while maintaining an easy learning curve for novice Perl programmers. Bioperl is capable of executing analyses and processing results from programs such as BLAST, ClustalW, or the EMBOSS suite. Interoperation with modules written in Python and Java is supported through the evolving BioCORBA bridge. Bioperl provides access to data stores such as GenBank and SwissProt via a flexible series of sequence input/output modules, and to the emerging common sequence data storage format of the Open Bioinformatics Database Access project. This study describes the overall architecture of the toolkit, the problem domains that it addresses, and gives specific examples of how the toolkit can be used to solve common life-sciences problems. We conclude with a discussion of how the open-source nature of the project has contributed to the development effort. [Supplemental material is available online at www.genome.org. Bioperl is available as open-source software free of charge and is licensed under the Perl Artistic License (http://www.perl.com/pub/a/language/misc/Artistic.html). It is available for download at http://www.bioperl.org. Support inquiries should be addressed to bioperl-l@bioperl.org.] PMID:12368254

Science in the Wild: Adventure Citizen Science in the Arctic and Himalaya

NASA Astrophysics Data System (ADS)

Horodyskyj, U. N.; Rufat-Latre, J.; Reimuller, J. D.; Rowe, P.; Pothier, B.; Thapa, A.

2016-12-01

Science in the Wild provides educational hands-on adventure science expeditions for the everyday person, blending athletics and academics in remote regions of the planet. Participants receive training on field data collection techniques in order to be able to help scientists in the field while on expedition with them. At SITW, we also involve our participants in analyzing and interpreting the data, thus teaching them about data quality and sources of error and uncertainty. SITW teaches citizens the art of science storytelling, aims to make science more open and transparent, and utilizes open source software and hardware in projects. Open science serves both the research community and the greater public. For the former, it makes science reproducible, transparent and more impactful by mobilizing multidisciplinary and international collaborative research efforts. For the latter, it minimizes mistrust in the sciences by allowing the public a `behind-the-scenes' look into how scientific research is conducted, raw and unfiltered. We present results from a citizen-science expedition to Baffin Island (Canadian Arctic), which successfully skied and sampled snow for dust and black carbon concentration from the Penny Ice Cap, down the 25-mile length of Coronation Glacier, and back to the small Arctic town of Qikitarjuaq. From a May/June 2016 citizen-science expedition to Nepal (Himalaya), we present results comparing 2014/16 depth and lake floor compositional data from supraglacial lakes on Ngozumpa glacier while using open-source surface and underwater robotics. The Sherpa-Scientist Initiative, a program aimed at empowering locals in data collection and interpretation, successfully trained half a dozen Sherpas during this expedition and demonstrates the value of local engagement. In future expeditions to the region, efforts will be made to scale up the number of trainees and expand our spatial reach in the Himalaya.

Social Network Analysis of Biomedical Research Collaboration Networks in a CTSA Institution

PubMed Central

Bian, Jiang; Xie, Mengjun; Topaloglu, Umit; Hudson, Teresa; Eswaran, Hari; Hogan, William

2014-01-01

BACKGROUND The popularity of social networks has triggered a number of research efforts on network analyses of research collaborations in the Clinical and Translational Science Award (CTSA) community. Those studies mainly focus on the general understanding of collaboration networks by measuring common network metrics. More fundamental questions about collaborations still remain unanswered such as recognizing “influential” nodes and identifying potential new collaborations that are most rewarding. METHODS We analyzed biomedical research collaboration networks (RCNs) constructed from a dataset of research grants collected at a CTSA institution (i.e. University of Arkansas for Medical Sciences (UAMS)) in a comprehensive and systematic manner. First, our analysis covers the full spectrum of a RCN study: from network modeling to network characteristics measurement, from key nodes recognition to potential links (collaborations) suggestion. Second, our analysis employs non-conventional model and techniques including a weighted network model for representing collaboration strength, rank aggregation for detecting important nodes, and Random Walk with Restart (RWR) for suggesting new research collaborations. RESULTS By applying our models and techniques to RCNs at UAMS prior to and after the CTSA, we have gained valuable insights that not only reveal the temporal evolution of the network dynamics but also assess the effectiveness of the CTSA and its impact on a research institution. We find that collaboration networks at UAMS are not scale-free but small-world. Quantitative measures have been obtained to evident that the RCNs at UAMS are moving towards favoring multidisciplinary research. Moreover, our link prediction model creates the basis of collaboration recommendations with an impressive accuracy (AUC: 0.990, MAP@3: 1.48 and MAP@5: 1.522). Last but not least, an open-source visual analytical tool for RCNs is being developed and released through Github. CONCLUSIONS Through this study, we have developed a set of techniques and tools for analyzing research collaboration networks and conducted a comprehensive case study focusing on a CTSA institution. Our findings demonstrate the promising future of these techniques and tools in understanding the generative mechanisms of research collaborations and helping identify beneficial collaborations to members in the research community. PMID:24560679

Playful Collaboration (or Not): Using a Game to Grasp the Social Dynamics of Open Innovation in Innovation and Business Education

ERIC Educational Resources Information Center

Bogers, Marcel; Sproedt, Henrik

2012-01-01

This article explores how playing games can be used to teach intangible social interaction across boundaries, in particular within open collaborative innovation. We present an exploratory case study of how students learned from playing a board game in a graduate course of the international and interdisciplinary Innovation and Business master's…

CILogon-HA. Higher Assurance Federated Identities for DOE Science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basney, James

The CILogon-HA project extended the existing open source CILogon service (initially developed with funding from the National Science Foundation) to provide credentials at multiple levels of assurance to users of DOE facilities for collaborative science. CILogon translates mechanism and policy across higher education and grid trust federations, bridging from the InCommon identity federation (which federates university and DOE lab identities) to the Interoperable Global Trust Federation (which defines standards across the Worldwide LHC Computing Grid, the Open Science Grid, and other cyberinfrastructure). The CILogon-HA project expanded the CILogon service to support over 160 identity providers (including 6 DOE facilities) andmore » 3 internationally accredited certification authorities. To provide continuity of operations upon the end of the CILogon-HA project period, project staff transitioned the CILogon service to operation by XSEDE.« less

Data Democratization - Promoting Real-Time Data Sharing and Use Worldwide

NASA Astrophysics Data System (ADS)

Yoksas, T. C.; Almeida, W. G.; Leon, V. C.

2007-05-01

The Unidata Program Center (Unidata) of the University Corporation of Atmospheric Research (UCAR) is actively involved in international collaborations whose goals are the free-and-open sharing of hydro-meteorological data; the distribution of analysis and visualization tools for those data; the establishment of server technologies that provide easy-to-use, programmatic remote-access to a wide variety of datasets, and in the building of a community where data, tools, and best practices in education and research are shared. The tools and services provided by Unidata are available to the research and education community free-of-charge. Data sharing capabilities are being provided by Unidata's Internet Data Distribution (IDD) system, a community-based effort that has been the primary source of real-time meteorological data in the US university community for over a decade. A collaboration among Unidata, Brazil's Centro de Previso de Tempo e Estudos Climaticos (CPTEC), the Universidad Federal do Rio de Janeiro (UFRJ), and the Universidade de Sao Paulo (USP) has resulted in the creation of a Brazilian peer of the North American IDD, the IDD-Brasil. Collaboration between Unidata and the Universidad de Costa Rica (UCR) seeks to extend IDD data sharing throughout Central America and the Caribbean in an IDD-Caribe. Efforts aimed at creating a data sharing network for researchers on the Antarctic continent have resulted in the establishment of the Antarctic-IDD. Most recently, explorations of data sharing between UCAR and select countries in Africa have begun. Data analysis and visualization capabilities are available through Unidata in a suite of freely-available applications: the National Centers for Environmental Prediction (NCEP) GEneral Meteorology PAcKage (GEMPAK); the Unidata Integrated Data Viewer (IDV); and University of Wisconsin, Space Science and Engineering Center (SSEC) Man-computer Interactive Data Access System (McIDAS). Remote data access capabilities are provided by Unidata's Thematic Realtime Environmental Data Services (THREDDS) servers (which incorporate Open-source Project for a Network Data Access (OPeNDAP) data services), and the Abstract Data Distribution Environment (ADDE) of McIDAS. It is envisioned that the data sharing capabilities available in the IDD, IDD-Brasil, IDD-Caribe, and Antarctic-IDD, remote data access capabilities available in THREDDS and ADDE, and analysis capabilities available in GEMPAK, the IDV, and McIDAS will help foster new collaborations among prominent universities, national meteorological agencies, and WMO Regional Meteorological Training Centers throughout North, Central, and South America, in the Antarctic research community, and eventually in Africa. This paper is intended to inform AGU 2007 Joint Assembly attendees, especially those in Mexico and Central America, of the availability of real-time data and tools to analyze/visualize those data, and to promote the free-and-open sharing of data, especially of locally-held datasets of general interest.

BioBlend: automating pipeline analyses within Galaxy and CloudMan.

PubMed

Sloggett, Clare; Goonasekera, Nuwan; Afgan, Enis

2013-07-01

We present BioBlend, a unified API in a high-level language (python) that wraps the functionality of Galaxy and CloudMan APIs. BioBlend makes it easy for bioinformaticians to automate end-to-end large data analysis, from scratch, in a way that is highly accessible to collaborators, by allowing them to both provide the required infrastructure and automate complex analyses over large datasets within the familiar Galaxy environment. http://bioblend.readthedocs.org/. Automated installation of BioBlend is available via PyPI (e.g. pip install bioblend). Alternatively, the source code is available from the GitHub repository (https://github.com/afgane/bioblend) under the MIT open source license. The library has been tested and is working on Linux, Macintosh and Windows-based systems.

Branson: A Mini-App for Studying Parallel IMC, Version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, Alex

This code solves the gray thermal radiative transfer (TRT) equations in parallel using simple opacities and Cartesian meshes. Although Branson solves the TRT equations it is not designed to model radiation transport: Branson contains simple physics and does not have a multigroup treatment, nor can it use physical material data. The opacities have are simple polynomials in temperature there is a limited ability to specify complex geometries and sources. Branson was designed only to capture the computational demands of production IMC codes, especially in large parallel runs. It was also intended to foster collaboration with vendors, universities and other DOEmore » partners. Branson is similar in character to the neutron transport proxy-app Quicksilver from LLNL, which was recently open-sourced.« less

The Computable Catchment: An executable document for model-data software sharing, reproducibility and interactive visualization

NASA Astrophysics Data System (ADS)

Gil, Y.; Duffy, C.

2015-12-01

This paper proposes the concept of a "Computable Catchment" which is used to develop a collaborative platform for watershed modeling and data analysis. The object of the research is a sharable, executable document similar to a pdf, but one that includes documentation of the underlying theoretical concepts, interactive computational/numerical resources, linkage to essential data repositories and the ability for interactive model-data visualization and analysis. The executable document for each catchment is stored in the cloud with automatic provisioning and a unique identifier allowing collaborative model and data enhancements for historical hydroclimatic reconstruction and/or future landuse or climate change scenarios to be easily reconstructed or extended. The Computable Catchment adopts metadata standards for naming all variables in the model and the data. The a-priori or initial data is derived from national data sources for soils, hydrogeology, climate, and land cover available from the www.hydroterre.psu.edu data service (Leonard and Duffy, 2015). The executable document is based on Wolfram CDF or Computable Document Format with an interactive open-source reader accessible by any modern computing platform. The CDF file and contents can be uploaded to a website or simply shared as a normal document maintaining all interactive features of the model and data. The Computable Catchment concept represents one application for Geoscience Papers of the Future representing an extensible document that combines theory, models, data and analysis that are digitally shared, documented and reused among research collaborators, students, educators and decision makers.

Simulation Environment for Orion Launch Abort System Control Design Studies

NASA Technical Reports Server (NTRS)

McMinn, J. Dana; Jackson, E. Bruce; Christhilf, David M.

2007-01-01

The development and use of an interactive environment to perform control system design and analysis of the proposed Crew Exploration Vehicle Launch Abort System is described. The environment, built using a commercial dynamic systems design package, includes use of an open-source configuration control software tool and a collaborative wiki to coordinate between the simulation developers, control law developers and users. A method for switching between multiple candidate control laws and vehicle configurations is described. Aerodynamic models, especially in a development program, change rapidly, so a means for automating the implementation of new aerodynamic models is described.

Calibrated Blade-Element/Momentum Theory Aerodynamic Model of the MARIN Stock Wind Turbine: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goupee, A.; Kimball, R.; de Ridder, E. J.

2015-04-02

In this paper, a calibrated blade-element/momentum theory aerodynamic model of the MARIN stock wind turbine is developed and documented. The model is created using open-source software and calibrated to closely emulate experimental data obtained by the DeepCwind Consortium using a genetic algorithm optimization routine. The provided model will be useful for those interested in validating interested in validating floating wind turbine numerical simulators that rely on experiments utilizing the MARIN stock wind turbine—for example, the International Energy Agency Wind Task 30’s Offshore Code Comparison Collaboration Continued, with Correlation project.

Building a biomedical cyberinfrastructure for collaborative research.

PubMed

Schad, Peter A; Mobley, Lee Rivers; Hamilton, Carol M

2011-05-01

For the potential power of genome-wide association studies (GWAS) and translational medicine to be realized, the biomedical research community must adopt standard measures, vocabularies, and systems to establish an extensible biomedical cyberinfrastructure. Incorporating standard measures will greatly facilitate combining and comparing studies via meta-analysis. Incorporating consensus-based and well-established measures into various studies should reduce the variability across studies due to attributes of measurement, making findings across studies more comparable. This article describes two well-established consensus-based approaches to identifying standard measures and systems: PhenX (consensus measures for phenotypes and eXposures), and the Open Geospatial Consortium (OGC). NIH support for these efforts has produced the PhenX Toolkit, an assembled catalog of standard measures for use in GWAS and other large-scale genomic research efforts, and the RTI Spatial Impact Factor Database (SIFD), a comprehensive repository of geo-referenced variables and extensive meta-data that conforms to OGC standards. The need for coordinated development of cyberinfrastructure to support measures and systems that enhance collaboration and data interoperability is clear; this paper includes a discussion of standard protocols for ensuring data compatibility and interoperability. Adopting a cyberinfrastructure that includes standard measures and vocabularies, and open-source systems architecture, such as the two well-established systems discussed here, will enhance the potential of future biomedical and translational research. Establishing and maintaining the cyberinfrastructure will require a fundamental change in the way researchers think about study design, collaboration, and data storage and analysis. Copyright © 2011 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Building a Biomedical Cyberinfrastructure for Collaborative Research

PubMed Central

Schad, Peter A.; Mobley, Lee Rivers; Hamilton, Carol M.

2018-01-01

For the potential power of genome-wide association studies (GWAS) and translational medicine to be realized, the biomedical research community must adopt standard measures, vocabularies, and systems to establish an extensible biomedical cyberinfrastructure. Incorporating standard measures will greatly facilitate combining and comparing studies via meta-analysis, which is a means for deriving larger populations, needed for increased statistical power to detect less apparent and more complex associations (gene-environment interactions and polygenic gene-gene interactions). Incorporating consensus-based and well-established measures into various studies should reduce the variability across studies due to attributes of measurement, making findings across studies more comparable. This article describes two consensus-based approaches to establishing standard measures and systems: PhenX (consensus measures for Phenotypes and eXposures), and the Open Geospatial Consortium (OGC). National Institutes of Health support for these efforts has produced the PhenX Toolkit, an assembled catalog of standard measures for use in GWAS and other large-scale genomic research efforts, and the RTI Spatial Impact Factor Database (SIFD), a comprehensive repository of georeferenced variables and extensive metadata that conforms to OGC standards. The need for coordinated development of cyberinfrastructure to support collaboration and data interoperability is clear, and we discuss standard protocols for ensuring data compatibility and interoperability. Adopting a cyberinfrastructure that includes standard measures, vocabularies, and open-source systems architecture will enhance the potential of future biomedical and translational research. Establishing and maintaining the cyberinfrastructure will require a fundamental change in the way researchers think about study design, collaboration, and data storage and analysis. PMID:21521587

Distributed data discovery, access and visualization services to Improve Data Interoperability across different data holdings

NASA Astrophysics Data System (ADS)

Palanisamy, G.; Krassovski, M.; Devarakonda, R.; Santhana Vannan, S.

2012-12-01

The current climate debate is highlighting the importance of free, open, and authoritative sources of high quality climate data that are available for peer review and for collaborative purposes. It is increasingly important to allow various organizations around the world to share climate data in an open manner, and to enable them to perform dynamic processing of climate data. This advanced access to data can be enabled via Web-based services, using common "community agreed" standards without having to change their internal structure used to describe the data. The modern scientific community has become diverse and increasingly complex in nature. To meet the demands of such diverse user community, the modern data supplier has to provide data and other related information through searchable, data and process oriented tool. This can be accomplished by setting up on-line, Web-based system with a relational database as a back end. The following common features of the web data access/search systems will be outlined in the proposed presentation: - A flexible data discovery - Data in commonly used format (e.g., CSV, NetCDF) - Preparing metadata in standard formats (FGDC, ISO19115, EML, DIF etc.) - Data subseting capabilities and ability to narrow down to individual data elements - Standards based data access protocols and mechanisms (SOAP, REST, OpenDAP, OGC etc.) - Integration of services across different data systems (discovery to access, visualizations and subseting) This presentation will also include specific examples of integration of various data systems that are developed by Oak Ridge National Laboratory's - Climate Change Science Institute, their ability to communicate between each other to enable better data interoperability and data integration. References: [1] Devarakonda, Ranjeet, and Harold Shanafield. "Drupal: Collaborative framework for science research." Collaboration Technologies and Systems (CTS), 2011 International Conference on. IEEE, 2011. [2]Devarakonda, R., Shrestha, B., Palanisamy, G., Hook, L. A., Killeffer, T. S., Boden, T. A., ... & Lazer, K. (2014). THE NEW ONLINE METADATA EDITOR FOR GENERATING STRUCTURED METADATA. Oak Ridge National Laboratory (ORNL).

Collaboration using open standards and open source software (examples of DIAS/CEOS Water Portal)

NASA Astrophysics Data System (ADS)

Miura, S.; Sekioka, S.; Kuroiwa, K.; Kudo, Y.

2015-12-01

The DIAS/CEOS Water Portal is a part of the DIAS (Data Integration and Analysis System, http://www.editoria.u-tokyo.ac.jp/projects/dias/?locale=en_US) systems for data distribution for users including, but not limited to, scientists, decision makers and officers like river administrators. One of the functions of this portal is to enable one-stop search and access variable water related data archived multiple data centers located all over the world. This portal itself does not store data. Instead, according to requests made by users on the web page, it retrieves data from distributed data centers on-the-fly and lets them download and see rendered images/plots. Our system mainly relies on the open source software GI-cat (http://essi-lab.eu/do/view/GIcat) and open standards such as OGC-CSW, Opensearch and OPeNDAP protocol to enable the above functions. Details on how it works will be introduced during the presentation. Although some data centers have unique meta data format and/or data search protocols, our portal's brokering function enables users to search across various data centers at one time. And this portal is also connected to other data brokering systems, including GEOSS DAB (Discovery and Access Broker). As a result, users can search over thousands of datasets, millions of files at one time. Users can access the DIAS/CEOS Water Portal system at http://waterportal.ceos.org/.

MSiReader: an open-source interface to view and analyze high resolving power MS imaging files on Matlab platform.

PubMed

Robichaud, Guillaume; Garrard, Kenneth P; Barry, Jeremy A; Muddiman, David C

2013-05-01

During the past decade, the field of mass spectrometry imaging (MSI) has greatly evolved, to a point where it has now been fully integrated by most vendors as an optional or dedicated platform that can be purchased with their instruments. However, the technology is not mature and multiple research groups in both academia and industry are still very actively studying the fundamentals of imaging techniques, adapting the technology to new ionization sources, and developing new applications. As a result, there important varieties of data file formats used to store mass spectrometry imaging data and, concurrent to the development of MSi, collaborative efforts have been undertaken to introduce common imaging data file formats. However, few free software packages to read and analyze files of these different formats are readily available. We introduce here MSiReader, a free open source application to read and analyze high resolution MSI data from the most common MSi data formats. The application is built on the Matlab platform (Mathworks, Natick, MA, USA) and includes a large selection of data analysis tools and features. People who are unfamiliar with the Matlab language will have little difficult navigating the user-friendly interface, and users with Matlab programming experience can adapt and customize MSiReader for their own needs.

MSiReader: An Open-Source Interface to View and Analyze High Resolving Power MS Imaging Files on Matlab Platform

NASA Astrophysics Data System (ADS)

Robichaud, Guillaume; Garrard, Kenneth P.; Barry, Jeremy A.; Muddiman, David C.

2013-05-01

During the past decade, the field of mass spectrometry imaging (MSI) has greatly evolved, to a point where it has now been fully integrated by most vendors as an optional or dedicated platform that can be purchased with their instruments. However, the technology is not mature and multiple research groups in both academia and industry are still very actively studying the fundamentals of imaging techniques, adapting the technology to new ionization sources, and developing new applications. As a result, there important varieties of data file formats used to store mass spectrometry imaging data and, concurrent to the development of MSi, collaborative efforts have been undertaken to introduce common imaging data file formats. However, few free software packages to read and analyze files of these different formats are readily available. We introduce here MSiReader, a free open source application to read and analyze high resolution MSI data from the most common MSi data formats. The application is built on the Matlab platform (Mathworks, Natick, MA, USA) and includes a large selection of data analysis tools and features. People who are unfamiliar with the Matlab language will have little difficult navigating the user-friendly interface, and users with Matlab programming experience can adapt and customize MSiReader for their own needs.

Thyroid Cancer and Tumor Collaborative Registry (TCCR).

PubMed

Shats, Oleg; Goldner, Whitney; Feng, Jianmin; Sherman, Alexander; Smith, Russell B; Sherman, Simon

2016-01-01

A multicenter, web-based Thyroid Cancer and Tumor Collaborative Registry (TCCR, http://tccr.unmc.edu) allows for the collection and management of various data on thyroid cancer (TC) and thyroid nodule (TN) patients. The TCCR is coupled with OpenSpecimen, an open-source biobank management system, to annotate biospecimens obtained from the TCCR subjects. The demographic, lifestyle, physical activity, dietary habits, family history, medical history, and quality of life data are provided and may be entered into the registry by subjects. Information on diagnosis, treatment, and outcome is entered by the clinical personnel. The TCCR uses advanced technical and organizational practices, such as (i) metadata-driven software architecture (design); (ii) modern standards and best practices for data sharing and interoperability (standardization); (iii) Agile methodology (project management); (iv) Software as a Service (SaaS) as a software distribution model (operation); and (v) the confederation principle as a business model (governance). This allowed us to create a secure, reliable, user-friendly, and self-sustainable system for TC and TN data collection and management that is compatible with various end-user devices and easily adaptable to a rapidly changing environment. Currently, the TCCR contains data on 2,261 subjects and data on more than 28,000 biospecimens. Data and biological samples collected by the TCCR are used in developing diagnostic, prevention, treatment, and survivorship strategies against TC.

Neurokernel: An Open Source Platform for Emulating the Fruit Fly Brain

PubMed Central

2016-01-01

We have developed an open software platform called Neurokernel for collaborative development of comprehensive models of the brain of the fruit fly Drosophila melanogaster and their execution and testing on multiple Graphics Processing Units (GPUs). Neurokernel provides a programming model that capitalizes upon the structural organization of the fly brain into a fixed number of functional modules to distinguish between these modules’ local information processing capabilities and the connectivity patterns that link them. By defining mandatory communication interfaces that specify how data is transmitted between models of each of these modules regardless of their internal design, Neurokernel explicitly enables multiple researchers to collaboratively model the fruit fly’s entire brain by integration of their independently developed models of its constituent processing units. We demonstrate the power of Neurokernel’s model integration by combining independently developed models of the retina and lamina neuropils in the fly’s visual system and by demonstrating their neuroinformation processing capability. We also illustrate Neurokernel’s ability to take advantage of direct GPU-to-GPU data transfers with benchmarks that demonstrate scaling of Neurokernel’s communication performance both over the number of interface ports exposed by an emulation’s constituent modules and the total number of modules comprised by an emulation. PMID:26751378

Health Informatics for Development: a Three-pronged Strategy of Partnerships, Standards, and Mobile Health. Contribution of the IMIA Working Group on Health Informatics for Development.

PubMed

Marcelo, A; Adejumo, A; Luna, D

2011-01-01

Describe the issues surrounding health informatics in developing countries and the challenges faced by practitioners in building internal capacity. From these issues, the authors propose cost-effective strategies that can fast track health informatics development in these low to medium income countries (LMICs). The authors conducted a review of literature and consulted key opinion leaders who have experience with health informatics implementations around the world. Despite geographic and cultural differences, many LMICs share similar challenges and opportunities in developing health informatics. Partnerships, standards, and inter-operability are well known components of successful informatics programs. Establishing partnerships can be comprised of formal inter-institutional collaborations on training and research, collaborative open source software development, and effective use of social networking. Lacking legacy systems, LMICs can discuss standards and inter-operability more openly and have greater potential for success. Lastly, since cellphones are pervasive in developing countries, they can be leveraged as access points for delivering and documenting health services in remote under-served areas. Mobile health or mHealth gives LMICs a unique opportunity to leapfrog through most issues that have plagued health informatics in developed countries. By employing this proposed roadmap, LMICs can now develop capacity for health informatics using appropriate and cost-effective technologies.

Collaborative workbench for cyberinfrastructure to accelerate science algorithm development

NASA Astrophysics Data System (ADS)

Ramachandran, R.; Maskey, M.; Kuo, K.; Lynnes, C.

2013-12-01

There are significant untapped resources for information and knowledge creation within the Earth Science community in the form of data, algorithms, services, analysis workflows or scripts, and the related knowledge about these resources. Despite the huge growth in social networking and collaboration platforms, these resources often reside on an investigator's workstation or laboratory and are rarely shared. A major reason for this is that there are very few scientific collaboration platforms, and those that exist typically require the use of a new set of analysis tools and paradigms to leverage the shared infrastructure. As a result, adoption of these collaborative platforms for science research is inhibited by the high cost to an individual scientist of switching from his or her own familiar environment and set of tools to a new environment and tool set. This presentation will describe an ongoing project developing an Earth Science Collaborative Workbench (CWB). The CWB approach will eliminate this barrier by augmenting a scientist's current research environment and tool set to allow him or her to easily share diverse data and algorithms. The CWB will leverage evolving technologies such as commodity computing and social networking to design an architecture for scalable collaboration that will support the emerging vision of an Earth Science Collaboratory. The CWB is being implemented on the robust and open source Eclipse framework and will be compatible with widely used scientific analysis tools such as IDL. The myScience Catalog built into CWB will capture and track metadata and provenance about data and algorithms for the researchers in a non-intrusive manner with minimal overhead. Seamless interfaces to multiple Cloud services will support sharing algorithms, data, and analysis results, as well as access to storage and computer resources. A Community Catalog will track the use of shared science artifacts and manage collaborations among researchers.

REDBACK: an Open-Source Highly Scalable Simulation Tool for Rock Mechanics with Dissipative Feedbacks

NASA Astrophysics Data System (ADS)

Poulet, T.; Veveakis, M.; Paesold, M.; Regenauer-Lieb, K.

2014-12-01

Multiphysics modelling has become an indispensable tool for geoscientists to simulate the complex behaviours observed in their various fields of study where multiple processes are involved, including thermal, hydraulic, mechanical and chemical (THMC) laws. This modelling activity involves simulations that are computationally expensive and its soaring uptake is tightly linked to the increasing availability of supercomputing power and easy access to powerful nonlinear solvers such as PETSc (http://www.mcs.anl.gov/petsc/). The Multiphysics Object-Oriented Simulation Environment (MOOSE) is a finite-element, multiphysics framework (http://mooseframework.org) that can harness such computational power and allow scientists to develop easily some tightly-coupled fully implicit multiphysics simulations that run automatically in parallel on large clusters. This open-source framework provides a powerful tool to collaborate on numerical modelling activities and we are contributing to its development with REDBACK (https://github.com/pou036/redback), a module for Rock mEchanics with Dissipative feedBACKs. REDBACK builds on the tensor mechanics finite strain implementation available in MOOSE to provide a THMC simulator where the energetic formulation highlights the importance of all dissipative terms in the coupled system of equations. We show first applications of fully coupled dehydration reactions triggering episodic fluid transfer through shear zones (Alevizos et al, 2014). The dimensionless approach used allows focusing on the critical underlying variables which are driving the resulting behaviours observed and this tool is specifically designed to study material instabilities underpinning geological features like faulting, folding, boudinage, shearing, fracturing, etc. REDBACK provides a collaborative and educational tool which captures the physical and mathematical understanding of such material instabilities and provides an easy way to apply this knowledge to realistic scenarios, where the size and complexity of the geometries considered, along with the material parameters distributions, add as many sources of different instabilities. References: Alevizos, S., T. Poulet, and E. Veveakis (2014), J. Geophys. Res., 119, 4558-4582, doi:10.1002/2013JB010070.

Using the prisms of gender and rank to interpret research collaboration power dynamics.

PubMed

Gaughan, Monica; Bozeman, Barry

2016-08-01

Collaboration is central to modern scientific inquiry, and increasingly important to the professional experiences of academic scientists. While the effects of collaboration have been widely studied, much less is understood about the motivations to collaborate and collaboration dynamics that generate scientific outcomes. A particular interest of this study is to understand how collaboration experiences differ between women and men, and the attributions used to explain these differences. We use a multi-method study of university Science, Technology, Engineering, and Mathematics faculty research collaborators. We employ 177 anonymous open-ended responses to a web-based survey, and 60 semi-structured interviews of academic scientists in US research universities. We find similarities and differences in collaborative activity between men and women. Open-ended qualitative textual analysis suggests that some of these differences are attributed to power dynamics - both general ones related to differences in organizational status, and in power dynamics related specifically to gender. In analysis of semi-structured interviews, we find that both status and gender were used as interpretive frames for collaborative behavior, with more emphasis placed on status than gender differences. Overall, the findings support that gender structures some part of the collaborative experience, but that status hierarchy exerts more clear effects.

Open Courses and MOOCs as Professional Development--Is the Openness a Hindrance?

ERIC Educational Resources Information Center

Olsson, Ulf

2016-01-01

Purpose: The purpose of this paper is to analyse if open courses, including massive open online courses (MOOCs), can be used as professional development despite their openness since the openness not only brings together individuals from different organizations but also may make the results of collaboration public. Design/methodology/approach: The…

Helping Italian science teachers to make earth and climate active lessons. Results of 3 years support with the ICLEEN project

NASA Astrophysics Data System (ADS)

Cattadori, M.

2013-12-01

It has been demonstrated that in Italy Earth and Climate System Sciences Education (ESS) is one of the scientific disciplines where science teachers show a greatest need in terms of professional support. Among the causes that have been reported we should mention: the predominance of science teachers with a degree in biological disciplines rather then geo-logical or physical topics, and the high interdisciplinarity of certain topics, in particular those related to the climate system. Furthermore, it was found that ESS topics are predominant in the science curricula of those grades in which have been reported the major students dropout rates during the whole italian school cycle . In this context, in 2010, the MUSE, the Museum of Science of Trento (Italy), created a web-based service named I-Cleen (Inquring on Climate and Energy www.icleen.muse.it). This is a tool aimed at promoting the collaboration among science teachers in order to share resources and enhance the professional collaboration by means of participatory methods and models belonging to the world of open source and open content. The main instrument of the I-CLEEN project is an online repository (with metadata compliant with the DCMI and LOM international standards) of teaching resources focused on Earth and Climate Sciences all published under the Creative Commons license Attribution 3.0 and therefore, belonging to the model of OER (Open Educational Resources). The service has been designed, developed and managed by a team consisting of very experiencing science teachers and scientists from the Museum and other partners research institutions. The editorial work is carried out online utilizing a specific platform made with LifeRay, a CMS (Content Management System) software that is open source and manageable in a single Java-frameworked environment using the dbase, the website, the editorial process and several web 2.0 services. The project has been subjected to two distinct testing activities in collaboration with the University of Trento dealing with the effectiveness of the service as well as the usability of the graphic user interface (GUI). The present work aims to illustrate the essential features of the service I-cleen and the results achieved during the last three years of operation. It will be display and interpret for the first time data with web traffic, and other data from downloading and publishing documents of the teaching resources and the main outcomes of the above mentioned tests. The purpose of this contribution is to highlight strengths and weaknesses of this experience and potentially able to provide valuable information on the role of today's web based services and online communities to help support teachers in earth and climate sciences subjects.

An open science approach to modeling and visualizing ...

EPA Pesticide Factsheets

It is expected that cyanobacteria blooms will increase in frequency, duration, and severity as inputs of nutrients increase and the impacts of climate change are realized. Partly in response to this, federal, state, and local entities have ramped up efforts to better understand blooms which has resulted in new life for old datasets, new monitoring programs, and novel uses for non-traditional sources of data. To fully benefit from these datasets, it is also imperative that the full body of work including data, code, and manuscripts be openly available (i.e., open science). This presentation will provide several examples of our work which occurs at the intersection of open science and research on cyanobacetria blooms in lakes and ponds. In particular we will discuss 1) why open science is particularly important for environmental human health issues; 2) the lakemorpho and elevatr R packages and how we use those to model lake morphometry; 3) Shiny server applications to visualize data collected as part of the Cyanobacteria Monitoring Collaborative; and 4) distribution of our research and models via open access publications and as R packages on GitHub. Modelling and visualizing information on cyanobacteria blooms is important as it provides estimates of the extent of potential problems associated with these blooms. Furthermore, conducting this work in the open allows others to access our code, data, and results. In turn, this allows for a greater impact because the

Interpersonal Conflict in Collaborative Writing: What We Can Learn from Gender Studies.

ERIC Educational Resources Information Center

Lay, Mary M.

1989-01-01

Discusses how gender studies reveal psychological and cultural sources of interpersonal conflict during collaboration. Notes that an awareness of these conflict sources enables scholars and teachers in technical communication to predict and ease interpersonal conflict among collaborators. (MM)

Co-Creation and Open Innovation: Systematic Literature Review

ERIC Educational Resources Information Center

Ramírez, María-Soledad; García-Peñalvo, Francisco-José

2018-01-01

Open science, as a common good, opens possibilities for the development of nations, through innovations and collaborative constructions, which help to democratize knowledge. Advances in this area are still emerging, and the open science, co-creation of knowledge and open innovation triangle, is presented as an opportunity to generate an original…

Sandia National Laboratories: Livermore Valley Open Campus (LVOC)

Science.gov Websites

Visiting the LVOC Locations Livermore Valley Open Campus (LVOC) Open engagement Expanding opportunities for open engagement of the broader scientific community. Building on success Sandia's Combustion Research Facility pioneered open collaboration over 30 years ago. Access to DOE-funded capabilities Expanding access

Two-Stage Exams Improve Student Learning in an Introductory Geology Course: Logistics, Attendance, and Grades

ERIC Educational Resources Information Center

Knierim, Katherine; Turner, Henry; Davis, Ralph K.

2015-01-01

Two-stage exams--where students complete part one of an exam closed book and independently and part two is completed open book and independently (two-stage independent, or TS-I) or collaboratively (two-stage collaborative, or TS-C)--provide a means to include collaborative learning in summative assessments. Collaborative learning has been shown to…

When Collaborative Learning Meets Nature: Collaborative Learning as a Meaningful Learning Tool in the Ecology Inquiry Based Project

ERIC Educational Resources Information Center

Rozenszayn, Ronit; Assaraf, Orit Ben-Zvi

2011-01-01

This research suggests utilizing collaborative learning among high school students for better performance on ecology inquiry-based projects. A case study of nine 12th grade students who participated in collaborative learning sessions in the open field and in class is examined. The results show that the students concentrated on discussing the…

Leveraging Open Standards and Technologies to Search and Display Planetary Image Data

NASA Astrophysics Data System (ADS)

Rose, M.; Schauer, C.; Quinol, M.; Trimble, J.

2011-12-01

Mars and the Moon have both been visited by multiple NASA spacecraft. A large number of images and other data have been gathered by the spacecraft and are publicly available in NASA's Planetary Data System. Through a collaboration with Google, Inc., the User Centered Technologies group at NASA Ames Resarch Center has developed at tool for searching and browsing among images from multiple Mars and Moon missions. Development of this tool was facilitated by the use of several open technologies and standards. First, an open-source full-text search engine is used to search both place names on the target and to find images matching a geographic region. Second, the published API of the Google Earth browser plugin is used to geolocate the images on a virtual globe and allow the user to navigate on the globe to see related images. The structure of the application also employs standard protocols and services. The back-end is exposed as RESTful APIs, which could be reused by other client systems in the future. Further, the communication between the front- and back-end portions of the system utilizes open data standards including XML and KML (Keyhole Markup Language) for representation of textual and geographic data. The creation of the search index was facilitated by reuse of existing, publicly available metadata, including the Gazetteer of Planetary Nomenclature from the USGS, available in KML format. And the image metadata was reused from standards-compliant archives in the Planetary Data System. The system also supports collaboration with other tools by allowing export of search results in KML, and the ability to display those results in the Google Earth desktop application. We will demonstrate the search and visualization capabilities of the system, with emphasis on how the system facilitates reuse of data and services through the adoption of open standards.

Creating Regional Interdisciplinary Collaboration with Open Spaces at the People & Places Forum

EPA Science Inventory

Facilitating the integration of natural and social sciences in resource management presents a wide range of questions, including where to find collaborators and what knowledge collaborators can contribute. In order to begin to document answers to these questions, the Twin Ports-b...

Progress in Mirror-Based Fusion Neutron Source Development.

PubMed

Anikeev, A V; Bagryansky, P A; Beklemishev, A D; Ivanov, A A; Kolesnikov, E Yu; Korzhavina, M S; Korobeinikova, O A; Lizunov, A A; Maximov, V V; Murakhtin, S V; Pinzhenin, E I; Prikhodko, V V; Soldatkina, E I; Solomakhin, A L; Tsidulko, Yu A; Yakovlev, D V; Yurov, D V

2015-12-04

The Budker Institute of Nuclear Physics in worldwide collaboration has developed a project of a 14 MeV neutron source for fusion material studies and other applications. The projected neutron source of the plasma type is based on the gas dynamic trap (GDT), which is a special magnetic mirror system for plasma confinement. Essential progress in plasma parameters has been achieved in recent experiments at the GDT facility in the Budker Institute, which is a hydrogen (deuterium) prototype of the source. Stable confinement of hot-ion plasmas with the relative pressure exceeding 0.5 was demonstrated. The electron temperature was increased up to 0.9 keV in the regime with additional electron cyclotron resonance heating (ECRH) of a moderate power. These parameters are the record for axisymmetric open mirror traps. These achievements elevate the projects of a GDT-based neutron source on a higher level of competitive ability and make it possible to construct a source with parameters suitable for materials testing today. The paper presents the progress in experimental studies and numerical simulations of the mirror-based fusion neutron source and its possible applications including a fusion material test facility and a fusion-fission hybrid system.

Open Collaboration: A Problem Solving Strategy That Is Redefining NASA's Innovative Spirit

NASA Technical Reports Server (NTRS)

Rando, Cynthia M.; Fogarty, Jennifer A.; Richard, Elizabeth E.; Davis, Jeffrey R.

2011-01-01

In 2010, NASA?s Space Life Sciences Directorate announced the successful results from pilot experiments with open innovation methodologies. Specifically, utilization of internet based external crowd sourcing platforms to solve challenging problems in human health and performance related to the future of spaceflight. The follow-up to this success was an internal crowd sourcing pilot program entitled NASA@work, which was supported by the InnoCentive@work software platform. The objective of the NASA@work pilot was to connect the collective knowledge of individuals from all areas within the NASA organization via a private web based environment. The platform provided a venue for NASA Challenge Owners, those looking for solutions or new ideas, to pose challenges to internal solvers, those within NASA with the skill and desire to create solutions. The pilot was launched in 57 days, a record for InnoCentive and NASA, and ran for three months with a total of 20 challenges posted Agency wide. The NASA@work pilot attracted over 6000 participants throughout NASA with a total of 183 contributing solvers for the 20 challenges posted. At the time of the pilot?s closure, solvers provided viable solutions and ideas for 17 of the 20 posted challenges. The solver community provided feedback on the pilot describing it as a barrier breaking activity, conveying that there was a satisfaction associated with helping co-workers, that it was "fun" to think about problems outside normal work boundaries, and it was nice to learn what challenges others were facing across the agency. The results and the feedback from the solver community have demonstrated the power and utility of an internal collaboration tool, such as NASA@work.

OpenWorm: an open-science approach to modeling Caenorhabditis elegans.

PubMed

Szigeti, Balázs; Gleeson, Padraig; Vella, Michael; Khayrulin, Sergey; Palyanov, Andrey; Hokanson, Jim; Currie, Michael; Cantarelli, Matteo; Idili, Giovanni; Larson, Stephen

2014-01-01

OpenWorm is an international collaboration with the aim of understanding how the behavior of Caenorhabditis elegans (C. elegans) emerges from its underlying physiological processes. The project has developed a modular simulation engine to create computational models of the worm. The modularity of the engine makes it possible to easily modify the model, incorporate new experimental data and test hypotheses. The modeling framework incorporates both biophysical neuronal simulations and a novel fluid-dynamics-based soft-tissue simulation for physical environment-body interactions. The project's open-science approach is aimed at overcoming the difficulties of integrative modeling within a traditional academic environment. In this article the rationale is presented for creating the OpenWorm collaboration, the tools and resources developed thus far are outlined and the unique challenges associated with the project are discussed.

GeoChronos: An On-line Collaborative Platform for Earth Observation Scientists

NASA Astrophysics Data System (ADS)

Gamon, J. A.; Kiddle, C.; Curry, R.; Markatchev, N.; Zonta-Pastorello, G., Jr.; Rivard, B.; Sanchez-Azofeifa, G. A.; Simmonds, R.; Tan, T.

2009-12-01

Recent advances in cyberinfrastructure are offering new solutions to the growing challenges of managing and sharing large data volumes. Web 2.0 and social networking technologies, provide the means for scientists to collaborate and share information more effectively. Cloud computing technologies can provide scientists with transparent and on-demand access to applications served over the Internet in a dynamic and scalable manner. Semantic Web technologies allow for data to be linked together in a manner understandable by machines, enabling greater automation. Combining all of these technologies together can enable the creation of very powerful platforms. GeoChronos (http://geochronos.org/), part of a CANARIE Network Enabled Platforms project, is an online collaborative platform that incorporates these technologies to enable members of the earth observation science community to share data and scientific applications and to collaborate more effectively. The GeoChronos portal is built on an open source social networking platform called Elgg. Elgg provides a full set of social networking functionalities similar to Facebook including blogs, tags, media/document sharing, wikis, friends/contacts, groups, discussions, message boards, calendars, status, activity feeds and more. An underlying cloud computing infrastructure enables scientists to access dynamically provisioned applications via the portal for visualizing and analyzing data. Users are able to access and run the applications from any computer that has a Web browser and Internet connectivity and do not need to manage and maintain the applications themselves. Semantic Web Technologies, such as the Resource Description Framework (RDF) are being employed for relating and linking together spectral, satellite, meteorological and other data. Social networking functionality plays an integral part in facilitating the sharing of data and applications. Examples of recent GeoChronos users during the early testing phase have included the IAI International Wireless Sensor Networking Summer School at the University of Alberta, and the IAI Tropi-Dry community. Current GeoChronos activities include the development of a web-based spectral library and related analytical and visualization tools, in collaboration with members of the SpecNet community. The GeoChronos portal will be open to all members of the earth observation science community when the project nears completion at the end of 2010.

A free and open source QGIS plugin for flood risk analysis: FloodRisk

NASA Astrophysics Data System (ADS)

Albano, Raffaele; Sole, Aurelia; Mancusi, Leonardo

2016-04-01

An analysis of global statistics shows a substantial increase in flood damage over the past few decades. Moreover, it is expected that flood risk will continue to rise due to the combined effect of increasing numbers of people and economic assets in risk-prone areas and the effects of climate change. In order to increase the resilience of European economies and societies, the improvement of risk assessment and management has been pursued in the last years. This results in a wide range of flood analysis models of different complexities with substantial differences in underlying components needed for its implementation, as geographical, hydrological and social differences demand specific approaches in the different countries. At present, it is emerging the need of promote the creation of open, transparent, reliable and extensible tools for a comprehensive, context-specific and applicable flood risk analysis. In this context, the free and open-source Quantum GIS (QGIS) plugin "FloodRisk" is a good starting point to address this objective. The vision of the developers of this free and open source software (FOSS) is to combine the main features of state-of-the-art science, collaboration, transparency and interoperability in an initiative to assess and communicate flood risk worldwide and to assist authorities to facilitate the quality and fairness of flood risk management at multiple scales. Among the scientific community, this type of activity can be labelled as "participatory research", intended as adopting a set of techniques that "are interactive and collaborative" and reproducible, "providing a meaningful research experience that both promotes learning and generates knowledge and research data through a process of guided discovery"' (Albano et al., 2015). Moreover, this FOSS geospatial approach can lowering the financial barriers to understanding risks at national and sub-national levels through a spatio-temporal domain and can provide better and more complete information and to generate knowledge in the stakeholders for improving flood risk management. In particular, Floodrisk comprises a set of calculators capable of computing human or economic losses for a collection of assets, caused by a given scenario event, explicitly covering mitigation and adaptation measures (Mancusi et al., 2015). It is important to mention that despite the fact that some literature models incorporates calculator philosophies identical to the ones implemented in the FloodRisk engine, its implementation might vary significantly, such as the need for a user-friendly and intuitive user interface, or the capability of running the calculations on any platform (Windows, Mac, Linux, etc.), the ability to promotes extensibility, efficient testability, and scientific operability. FloodRisk has been designed as an initiative for implemented a standard and harmonized procedure to determine the flood impacts. Albano, R.; Mancusi, L.; Sole, A.; Adamowski, J. Collaborative Strategies for Sustainable EU Flood Risk Management: FOSS and Geospatial Tools - Challenges and Opportunities for Operative Risk Analysis. ISPRS Int. J. Geo-Inf. 2015, 4, 2704-2727. Mancusi, L., Albano, R., Sole, A.. FloodRisk: a QGIS plugin for flood consequences estimation, In: Geomatics Workbooks n°12 - FOSS4G Europe Como, 2015

NASA Human Health and Performance Center: Open Innovation Successes and Collaborative Projects

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; Richard, Elizabeth E.

2014-01-01

In May 2007, what was then the Space Life Sciences Directorate published the 2007 Space Life Sciences Strategy for Human Space Exploration, which resulted in the development and implementation of new business models and significant advances in external collaboration over the next five years. The strategy was updated on the basis of these accomplishments and reissued as the NASA Human Health and Performance Strategy in 2012, and continues to drive new approaches to innovation for the directorate. This short paper describes the open innovation successes and collaborative projects developed over this timeframe, including the efforts of the NASA Human Health and Performance Center (NHHPC), which was established to advance human health and performance innovations for spaceflight and societal benefit via collaboration in new markets.

The Chemistry Development Kit (CDK) v2.0: atom typing, depiction, molecular formulas, and substructure searching.

PubMed

Willighagen, Egon L; Mayfield, John W; Alvarsson, Jonathan; Berg, Arvid; Carlsson, Lars; Jeliazkova, Nina; Kuhn, Stefan; Pluskal, Tomáš; Rojas-Chertó, Miquel; Spjuth, Ola; Torrance, Gilleain; Evelo, Chris T; Guha, Rajarshi; Steinbeck, Christoph

2017-06-06

The Chemistry Development Kit (CDK) is a widely used open source cheminformatics toolkit, providing data structures to represent chemical concepts along with methods to manipulate such structures and perform computations on them. The library implements a wide variety of cheminformatics algorithms ranging from chemical structure canonicalization to molecular descriptor calculations and pharmacophore perception. It is used in drug discovery, metabolomics, and toxicology. Over the last 10 years, the code base has grown significantly, however, resulting in many complex interdependencies among components and poor performance of many algorithms. We report improvements to the CDK v2.0 since the v1.2 release series, specifically addressing the increased functional complexity and poor performance. We first summarize the addition of new functionality, such atom typing and molecular formula handling, and improvement to existing functionality that has led to significantly better performance for substructure searching, molecular fingerprints, and rendering of molecules. Second, we outline how the CDK has evolved with respect to quality control and the approaches we have adopted to ensure stability, including a code review mechanism. This paper highlights our continued efforts to provide a community driven, open source cheminformatics library, and shows that such collaborative projects can thrive over extended periods of time, resulting in a high-quality and performant library. By taking advantage of community support and contributions, we show that an open source cheminformatics project can act as a peer reviewed publishing platform for scientific computing software. Graphical abstract CDK 2.0 provides new features and improved performance.

Mainstreaming Open Textbooks: Educator Perspectives on the Impact of OpenStax College Open Textbooks

ERIC Educational Resources Information Center

Pitt, Rebecca

2015-01-01

This paper presents the results of collaborative research between open textbook provider OpenStax College (OSC) and the OER Research Hub (OERRH), a Hewlett funded mixed methods open research project examining the impact of open educational resources (OER) on learning and teaching. The paper focuses primarily on the results of two surveys that were…

Relationship between Workplace Spatial Settings and Occupant-Perceived Support for Collaboration

ERIC Educational Resources Information Center

Hua, Ying; Loftness, Vivian; Heerwagen, Judith H.; Powell, Kevin M.

2011-01-01

The increasingly collaborative nature of knowledge-based work requires workplaces to support both dynamic interactions and concentrated work, both of which are critical for collaboration performance. Given the prevalence of open-plan settings, this requirement has created new challenges for workplace design. Therefore, an understanding of the…

Networking 2.0: Expanding your collaboration circles through the Interagency Arctic Research Policy Committee (IARPC)

NASA Astrophysics Data System (ADS)

Rohde, J. A.; Bowden, S.; Stephenson, S. N.; Starkweather, S.

2015-12-01

The Interagency Arctic Research Policy Committee (IARPC) envisions a prosperous, sustainable, and healthy Arctic understood through innovative and collaborative research coordinated among Federal agencies and domestic and international partners. IARPC's approach is to harnesses the talent of the scientific and stakeholder community through Federally-run but broadly open collaboration teams, and an innovative website that expands the frontiers of collaborative research. The Obama Administration released the five-year Arctic Research Plan: FY2013-2017 in February 2013. The Plan focuses on advancing knowledge and sustainability of the Arctic by improving collaboration in seven priority research areas: sea ice and marine ecosystems, terrestrial ice and ecosystems, atmospheric studies, observing systems, regional climate models, human health studies, and adaptation tools for communities. From these seven research areas, 12 collaboration teams were formed to respond to the 145 milestones laid out in the Plan. The collaboration teams are charged with enhancing inter-institutional and interdisciplinary implementation of scientific research on local, regional, and circumpolar environmental and societal issues in the Arctic. The collaboration teams are co-chaired by Federal program managers, and, in some cases, external partners and are open to research and stakeholder communities. They meet on a regular basis by web- or teleconference to inform one another about ongoing and planned programs and new research results, as well as to inventory existing programs, identify gaps in knowledge and research, and address and implement the Plan's milestones. In-between meetings, team members communicate via our innovative, user-driven, collaboration website. Members share information about their research activities by posting updates, uploading documents, and including events on our calendar, and entering into dialogue about their research activities. Conversations taking place on the website are open to any other member, enabling new talent to enter into conversations and collaborations to form.

Quality control, analysis and secure sharing of Luminex® immunoassay data using the open source LabKey Server platform

PubMed Central

2013-01-01

Background Immunoassays that employ multiplexed bead arrays produce high information content per sample. Such assays are now frequently used to evaluate humoral responses in clinical trials. Integrated software is needed for the analysis, quality control, and secure sharing of the high volume of data produced by such multiplexed assays. Software that facilitates data exchange and provides flexibility to perform customized analyses (including multiple curve fits and visualizations of assay performance over time) could increase scientists’ capacity to use these immunoassays to evaluate human clinical trials. Results The HIV Vaccine Trials Network and the Statistical Center for HIV/AIDS Research and Prevention collaborated with LabKey Software to enhance the open source LabKey Server platform to facilitate workflows for multiplexed bead assays. This system now supports the management, analysis, quality control, and secure sharing of data from multiplexed immunoassays that leverage Luminex xMAP® technology. These assays may be custom or kit-based. Newly added features enable labs to: (i) import run data from spreadsheets output by Bio-Plex Manager™ software; (ii) customize data processing, curve fits, and algorithms through scripts written in common languages, such as R; (iii) select script-defined calculation options through a graphical user interface; (iv) collect custom metadata for each titration, analyte, run and batch of runs; (v) calculate dose–response curves for titrations; (vi) interpolate unknown concentrations from curves for titrated standards; (vii) flag run data for exclusion from analysis; (viii) track quality control metrics across runs using Levey-Jennings plots; and (ix) automatically flag outliers based on expected values. Existing system features allow researchers to analyze, integrate, visualize, export and securely share their data, as well as to construct custom user interfaces and workflows. Conclusions Unlike other tools tailored for Luminex immunoassays, LabKey Server allows labs to customize their Luminex analyses using scripting while still presenting users with a single, graphical interface for processing and analyzing data. The LabKey Server system also stands out among Luminex tools for enabling smooth, secure transfer of data, quality control information, and analyses between collaborators. LabKey Server and its Luminex features are freely available as open source software at http://www.labkey.com under the Apache 2.0 license. PMID:23631706

Quality control, analysis and secure sharing of Luminex® immunoassay data using the open source LabKey Server platform.

PubMed

Eckels, Josh; Nathe, Cory; Nelson, Elizabeth K; Shoemaker, Sara G; Nostrand, Elizabeth Van; Yates, Nicole L; Ashley, Vicki C; Harris, Linda J; Bollenbeck, Mark; Fong, Youyi; Tomaras, Georgia D; Piehler, Britt

2013-04-30

Immunoassays that employ multiplexed bead arrays produce high information content per sample. Such assays are now frequently used to evaluate humoral responses in clinical trials. Integrated software is needed for the analysis, quality control, and secure sharing of the high volume of data produced by such multiplexed assays. Software that facilitates data exchange and provides flexibility to perform customized analyses (including multiple curve fits and visualizations of assay performance over time) could increase scientists' capacity to use these immunoassays to evaluate human clinical trials. The HIV Vaccine Trials Network and the Statistical Center for HIV/AIDS Research and Prevention collaborated with LabKey Software to enhance the open source LabKey Server platform to facilitate workflows for multiplexed bead assays. This system now supports the management, analysis, quality control, and secure sharing of data from multiplexed immunoassays that leverage Luminex xMAP® technology. These assays may be custom or kit-based. Newly added features enable labs to: (i) import run data from spreadsheets output by Bio-Plex Manager™ software; (ii) customize data processing, curve fits, and algorithms through scripts written in common languages, such as R; (iii) select script-defined calculation options through a graphical user interface; (iv) collect custom metadata for each titration, analyte, run and batch of runs; (v) calculate dose-response curves for titrations; (vi) interpolate unknown concentrations from curves for titrated standards; (vii) flag run data for exclusion from analysis; (viii) track quality control metrics across runs using Levey-Jennings plots; and (ix) automatically flag outliers based on expected values. Existing system features allow researchers to analyze, integrate, visualize, export and securely share their data, as well as to construct custom user interfaces and workflows. Unlike other tools tailored for Luminex immunoassays, LabKey Server allows labs to customize their Luminex analyses using scripting while still presenting users with a single, graphical interface for processing and analyzing data. The LabKey Server system also stands out among Luminex tools for enabling smooth, secure transfer of data, quality control information, and analyses between collaborators. LabKey Server and its Luminex features are freely available as open source software at http://www.labkey.com under the Apache 2.0 license.

First Universities Allied for Essential Medicines (UAEM) Neglected Diseases and Innovation Symposium.

PubMed

Musselwhite, Laura W; Maciag, Karolina; Lankowski, Alex; Gretes, Michael C; Wellems, Thomas E; Tavera, Gloria; Goulding, Rebecca E; Guillen, Ethan

2012-01-01

Universities Allied for Essential Medicines organized its first Neglected Diseases and Innovation Symposium to address expanding roles of public sector research institutions in innovation in research and development of biomedical technologies for treatment of diseases, particularly neglected tropical diseases. Universities and other public research institutions are increasingly integrated into the pharmaceutical innovation system. Academic entities now routinely undertake robust high-throughput screening and medicinal chemistry research programs to identify lead compounds for small molecule drugs and novel drug targets. Furthermore, product development partnerships are emerging between academic institutions, non-profit entities, and biotechnology and pharmaceutical companies to create diagnostics, therapies, and vaccines for diseases of the poor. With not for profit mission statements, open access publishing standards, open source platforms for data sharing and collaboration, and a shift in focus to more translational research, universities and other public research institutions are well-placed to accelerate development of medical technologies, particularly for neglected tropical diseases.

Abstract - Cooperative Research and Development Agreement between Environmental Defense Fund and National Energy Technology Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rose, Kelly K.; Zavala-Zraiza, Daniel

Here, we summarize an effort to develop a global oil and gas infrastructure (GOGI) taxonomy and geodatabase, using a combination of big data computing, custom search and data integration algorithms, and expert driven spatio-temporal analytics to identify, access, and evaluate open oil and gas data resources and uncertainty trends worldwide. This approach leveraged custom National Energy Technology Laboratory (NETL) tools and capabilities in collaboration with Environmental Defense Fund (EDF) and Carbon Limits subject matter expertise, to identify over 380 datasets and integrate more than 4.8 million features into the GOGI database. In addition to acquisition of open oil and gasmore » infrastructure data, information was collected and analyzed to assess the spatial, temporal, and source quality of these resources, and estimate their completeness relative to the top 40 hydrocarbon producing and consuming countries.« less

openSE: a Systems Engineering Framework Particularly Suited to Particle Accelerator Studies and Development Projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnal, P.; Féral, B.; Kershaw, K.

Particle accelerator projects share many characteristics with industrial projects. However, experience has shown that best practice of industrial project management is not always well suited to particle accelerator projects. Major differences include the number and complexity of technologies involved, the importance of collaborative work, development phases that can last more than a decade, and the importance of telerobotics and remote handling to address future preventive and corrective maintenance requirements due to induced radioactivity, to cite just a few. The openSE framework it is a systems engineering and project management framework specifically designed for scientific facilities’ systems and equipment studies andmore » development projects. Best practices in project management, in systems and requirements engineering, in telerobotics and remote handling and in radiation safety management were used as sources of inspiration, together with analysis of current practices surveyed at CERN, GSI and ESS.« less

E-learning and blended learning in textile engineering education: a closed feedback loop approach

NASA Astrophysics Data System (ADS)

Charitopoulos, A.; Vassiliadis, S.; Rangoussi, M.; Koulouriotis, D.

2017-10-01

E-learning has gained a significant role in typical education and in professional training, thanks to the flexibility it offers to the time and location parameters of the education event framework. Purely e-learning scenarios are mostly limited either to Open University-type higher education institutions or to graduate level or professional degrees; blended learning scenarios are progressively becoming popular thanks to their balanced approach. The aim of the present work is to propose approaches that exploit the e-learning and the blended-learning scenarios for Textile Engineering education programmes, especially for multi-institutional ones. The “E-Team” European MSc degree programme organized by AUTEX is used as a case study. The proposed solution is based on (i) a free and open-source e-learning platform (moodle) and (ii) blended learning educational scenarios. Educational challenges addressed include student engagement, student error / failure handling, as well as collaborative learning promotion and support.

Collaborating across Educational Divides: Why It Is Important for Literacy and What It Takes

ERIC Educational Resources Information Center

Conley, Mark W.

2016-01-01

The purpose of this commentary is to explore the prospect of reaching out and collaborating for our future in literacy education. Conley argues that we have not always known how to collaborate well. We have not been good collaborators in some instances, and because we have not always been open and inviting, it has been difficult for others to…

Open Textbook Proof-of-Concept via Connexions

ERIC Educational Resources Information Center

Baker, Judy; Thierstein, Joel; Fletcher, Kathi; Kaur, Manpreet; Emmons, Jonathan

2009-01-01

To address the high cost of textbooks, Rice University's Connexions and the Community College Open Textbook Project (CCOTP) collaborated to develop a proof-of-concept free and open textbook. The proof-of-concept served to document a workflow process that would support adoption of open textbooks. Open textbooks provide faculty and students with a…

A System for Information Management in BioMedical Studies—SIMBioMS

PubMed Central

Krestyaninova, Maria; Zarins, Andris; Viksna, Juris; Kurbatova, Natalja; Rucevskis, Peteris; Neogi, Sudeshna Guha; Gostev, Mike; Perheentupa, Teemu; Knuuttila, Juha; Barrett, Amy; Lappalainen, Ilkka; Rung, Johan; Podnieks, Karlis; Sarkans, Ugis; McCarthy, Mark I; Brazma, Alvis

2009-01-01

Summary: SIMBioMS is a web-based open source software system for managing data and information in biomedical studies. It provides a solution for the collection, storage, management and retrieval of information about research subjects and biomedical samples, as well as experimental data obtained using a range of high-throughput technologies, including gene expression, genotyping, proteomics and metabonomics. The system can easily be customized and has proven to be successful in several large-scale multi-site collaborative projects. It is compatible with emerging functional genomics data standards and provides data import and export in accepted standard formats. Protocols for transferring data to durable archives at the European Bioinformatics Institute have been implemented. Availability: The source code, documentation and initialization scripts are available at http://simbioms.org. Contact: support@simbioms.org; mariak@ebi.ac.uk PMID:19633095

Implementation of highly parallel and large scale GW calculations within the OpenAtom software

NASA Astrophysics Data System (ADS)

Ismail-Beigi, Sohrab

The need to describe electronic excitations with better accuracy than provided by band structures produced by Density Functional Theory (DFT) has been a long-term enterprise for the computational condensed matter and materials theory communities. In some cases, appropriate theoretical frameworks have existed for some time but have been difficult to apply widely due to computational cost. For example, the GW approximation incorporates a great deal of important non-local and dynamical electronic interaction effects but has been too computationally expensive for routine use in large materials simulations. OpenAtom is an open source massively parallel ab initiodensity functional software package based on plane waves and pseudopotentials (http://charm.cs.uiuc.edu/OpenAtom/) that takes advantage of the Charm + + parallel framework. At present, it is developed via a three-way collaboration, funded by an NSF SI2-SSI grant (ACI-1339804), between Yale (Ismail-Beigi), IBM T. J. Watson (Glenn Martyna) and the University of Illinois at Urbana Champaign (Laxmikant Kale). We will describe the project and our current approach towards implementing large scale GW calculations with OpenAtom. Potential applications of large scale parallel GW software for problems involving electronic excitations in semiconductor and/or metal oxide systems will be also be pointed out.

Improving Software Sustainability: Lessons Learned from Profiles in Science.

PubMed

Gallagher, Marie E

2013-01-01

The Profiles in Science® digital library features digitized surrogates of historical items selected from the archival collections of the U.S. National Library of Medicine as well as collaborating institutions. In addition, it contains a database of descriptive, technical and administrative metadata. It also contains various software components that allow creation of the metadata, management of the digital items, and access to the items and metadata through the Profiles in Science Web site [1]. The choices made building the digital library were designed to maximize the sustainability and long-term survival of all of the components of the digital library [2]. For example, selecting standard and open digital file formats rather than proprietary formats increases the sustainability of the digital files [3]. Correspondingly, using non-proprietary software may improve the sustainability of the software--either through in-house expertise or through the open source community. Limiting our digital library software exclusively to open source software or to software developed in-house has not been feasible. For example, we have used proprietary operating systems, scanning software, a search engine, and office productivity software. We did this when either lack of essential capabilities or the cost-benefit trade-off favored using proprietary software. We also did so knowing that in the future we would need to replace or upgrade some of our proprietary software, analogous to migrating from an obsolete digital file format to a new format as the technological landscape changes. Since our digital library's start in 1998, all of its software has been upgraded or replaced, but the digitized items have not yet required migration to other formats. Technological changes that compelled us to replace proprietary software included the cost of product licensing, product support, incompatibility with other software, prohibited use due to evolving security policies, and product abandonment. Sometimes these changes happen on short notice, so we continually monitor our library's software for signs of endangerment. We have attempted to replace proprietary software with suitable in-house or open source software. When the replacement involves a standalone piece of software with a nearly equivalent version, such as replacing a commercial HTTP server with an open source HTTP server, the replacement is straightforward. Recently we replaced software that functioned not only as our search engine but also as the backbone of the architecture of our Web site. In this paper, we describe the lessons learned and the pros and cons of replacing this software with open source software.

Open high-level data formats and software for gamma-ray astronomy

NASA Astrophysics Data System (ADS)

Deil, Christoph; Boisson, Catherine; Kosack, Karl; Perkins, Jeremy; King, Johannes; Eger, Peter; Mayer, Michael; Wood, Matthew; Zabalza, Victor; Knödlseder, Jürgen; Hassan, Tarek; Mohrmann, Lars; Ziegler, Alexander; Khelifi, Bruno; Dorner, Daniela; Maier, Gernot; Pedaletti, Giovanna; Rosado, Jaime; Contreras, José Luis; Lefaucheur, Julien; Brügge, Kai; Servillat, Mathieu; Terrier, Régis; Walter, Roland; Lombardi, Saverio

2017-01-01

In gamma-ray astronomy, a variety of data formats and proprietary software have been traditionally used, often developed for one specific mission or experiment. Especially for ground-based imaging atmospheric Cherenkov telescopes (IACTs), data and software are mostly private to the collaborations operating the telescopes. However, there is a general movement in science towards the use of open data and software. In addition, the next-generation IACT instrument, the Cherenkov Telescope Array (CTA), will be operated as an open observatory. We have created a Github organisation at https://github.com/open-gamma-ray-astro where we are developing high-level data format specifications. A public mailing list was set up at https://lists.nasa.gov/mailman/listinfo/open-gamma-ray-astro and a first face-to-face meeting on the IACT high-level data model and formats took place in April 2016 in Meudon (France). This open multi-mission effort will help to accelerate the development of open data formats and open-source software for gamma-ray astronomy, leading to synergies in the development of analysis codes and eventually better scientific results (reproducible, multi-mission). This write-up presents this effort for the first time, explaining the motivation and context, the available resources and process we use, as well as the status and planned next steps for the data format specifications. We hope that it will stimulate feedback and future contributions from the gamma-ray astronomy community.

In Brief: Open government

NASA Astrophysics Data System (ADS)

Showstack, Randy

2010-03-01

U.S. President Barack Obama's Memorandum on Transparency and Open Government requires federal agencies to take steps toward increased transparency, public participation, and collaboration. Agencies are accepting suggestions until 19 March 2010. For more information, visit http://www.whitehouse.gov/open and http://www.usa.gov/webcontent/open/tool_poc.shtml.

SaDA: From Sampling to Data Analysis—An Extensible Open Source Infrastructure for Rapid, Robust and Automated Management and Analysis of Modern Ecological High-Throughput Microarray Data

PubMed Central

Singh, Kumar Saurabh; Thual, Dominique; Spurio, Roberto; Cannata, Nicola

2015-01-01

One of the most crucial characteristics of day-to-day laboratory information management is the collection, storage and retrieval of information about research subjects and environmental or biomedical samples. An efficient link between sample data and experimental results is absolutely important for the successful outcome of a collaborative project. Currently available software solutions are largely limited to large scale, expensive commercial Laboratory Information Management Systems (LIMS). Acquiring such LIMS indeed can bring laboratory information management to a higher level, but most of the times this requires a sufficient investment of money, time and technical efforts. There is a clear need for a light weighted open source system which can easily be managed on local servers and handled by individual researchers. Here we present a software named SaDA for storing, retrieving and analyzing data originated from microorganism monitoring experiments. SaDA is fully integrated in the management of environmental samples, oligonucleotide sequences, microarray data and the subsequent downstream analysis procedures. It is simple and generic software, and can be extended and customized for various environmental and biomedical studies. PMID:26047146

Introducing GHOST: The Geospace/Heliosphere Observation & Simulation Tool-kit

NASA Astrophysics Data System (ADS)

Murphy, J. J.; Elkington, S. R.; Schmitt, P.; Wiltberger, M. J.; Baker, D. N.

2013-12-01

Simulation models of the heliospheric and geospace environments can provide key insights into the geoeffective potential of solar disturbances such as Coronal Mass Ejections and High Speed Solar Wind Streams. Advanced post processing of the results of these simulations greatly enhances the utility of these models for scientists and other researchers. Currently, no supported centralized tool exists for performing these processing tasks. With GHOST, we introduce a toolkit for the ParaView visualization environment that provides a centralized suite of tools suited for Space Physics post processing. Building on the work from the Center For Integrated Space Weather Modeling (CISM) Knowledge Transfer group, GHOST is an open-source tool suite for ParaView. The tool-kit plugin currently provides tools for reading LFM and Enlil data sets, and provides automated tools for data comparison with NASA's CDAweb database. As work progresses, many additional tools will be added and through open-source collaboration, we hope to add readers for additional model types, as well as any additional tools deemed necessary by the scientific public. The ultimate end goal of this work is to provide a complete Sun-to-Earth model analysis toolset.

Metadata management for high content screening in OMERO

PubMed Central

Li, Simon; Besson, Sébastien; Blackburn, Colin; Carroll, Mark; Ferguson, Richard K.; Flynn, Helen; Gillen, Kenneth; Leigh, Roger; Lindner, Dominik; Linkert, Melissa; Moore, William J.; Ramalingam, Balaji; Rozbicki, Emil; Rustici, Gabriella; Tarkowska, Aleksandra; Walczysko, Petr; Williams, Eleanor; Allan, Chris; Burel, Jean-Marie; Moore, Josh; Swedlow, Jason R.

2016-01-01

High content screening (HCS) experiments create a classic data management challenge—multiple, large sets of heterogeneous structured and unstructured data, that must be integrated and linked to produce a set of “final” results. These different data include images, reagents, protocols, analytic output, and phenotypes, all of which must be stored, linked and made accessible for users, scientists, collaborators and where appropriate the wider community. The OME Consortium has built several open source tools for managing, linking and sharing these different types of data. The OME Data Model is a metadata specification that supports the image data and metadata recorded in HCS experiments. Bio-Formats is a Java library that reads recorded image data and metadata and includes support for several HCS screening systems. OMERO is an enterprise data management application that integrates image data, experimental and analytic metadata and makes them accessible for visualization, mining, sharing and downstream analysis. We discuss how Bio-Formats and OMERO handle these different data types, and how they can be used to integrate, link and share HCS experiments in facilities and public data repositories. OME specifications and software are open source and are available at https://www.openmicroscopy.org. PMID:26476368

Metadata management for high content screening in OMERO.

PubMed

Li, Simon; Besson, Sébastien; Blackburn, Colin; Carroll, Mark; Ferguson, Richard K; Flynn, Helen; Gillen, Kenneth; Leigh, Roger; Lindner, Dominik; Linkert, Melissa; Moore, William J; Ramalingam, Balaji; Rozbicki, Emil; Rustici, Gabriella; Tarkowska, Aleksandra; Walczysko, Petr; Williams, Eleanor; Allan, Chris; Burel, Jean-Marie; Moore, Josh; Swedlow, Jason R

2016-03-01

High content screening (HCS) experiments create a classic data management challenge-multiple, large sets of heterogeneous structured and unstructured data, that must be integrated and linked to produce a set of "final" results. These different data include images, reagents, protocols, analytic output, and phenotypes, all of which must be stored, linked and made accessible for users, scientists, collaborators and where appropriate the wider community. The OME Consortium has built several open source tools for managing, linking and sharing these different types of data. The OME Data Model is a metadata specification that supports the image data and metadata recorded in HCS experiments. Bio-Formats is a Java library that reads recorded image data and metadata and includes support for several HCS screening systems. OMERO is an enterprise data management application that integrates image data, experimental and analytic metadata and makes them accessible for visualization, mining, sharing and downstream analysis. We discuss how Bio-Formats and OMERO handle these different data types, and how they can be used to integrate, link and share HCS experiments in facilities and public data repositories. OME specifications and software are open source and are available at https://www.openmicroscopy.org. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Panorama: A Targeted Proteomics Knowledge Base

PubMed Central

2015-01-01

Panorama is a web application for storing, sharing, analyzing, and reusing targeted assays created and refined with Skyline,1 an increasingly popular Windows client software tool for targeted proteomics experiments. Panorama allows laboratories to store and organize curated results contained in Skyline documents with fine-grained permissions, which facilitates distributed collaboration and secure sharing of published and unpublished data via a web-browser interface. It is fully integrated with the Skyline workflow and supports publishing a document directly to a Panorama server from the Skyline user interface. Panorama captures the complete Skyline document information content in a relational database schema. Curated results published to Panorama can be aggregated and exported as chromatogram libraries. These libraries can be used in Skyline to pick optimal targets in new experiments and to validate peak identification of target peptides. Panorama is open-source and freely available. It is distributed as part of LabKey Server,2 an open source biomedical research data management system. Laboratories and organizations can set up Panorama locally by downloading and installing the software on their own servers. They can also request freely hosted projects on https://panoramaweb.org, a Panorama server maintained by the Department of Genome Sciences at the University of Washington. PMID:25102069

SaDA: From Sampling to Data Analysis-An Extensible Open Source Infrastructure for Rapid, Robust and Automated Management and Analysis of Modern Ecological High-Throughput Microarray Data.

PubMed

Singh, Kumar Saurabh; Thual, Dominique; Spurio, Roberto; Cannata, Nicola

2015-06-03

One of the most crucial characteristics of day-to-day laboratory information management is the collection, storage and retrieval of information about research subjects and environmental or biomedical samples. An efficient link between sample data and experimental results is absolutely important for the successful outcome of a collaborative project. Currently available software solutions are largely limited to large scale, expensive commercial Laboratory Information Management Systems (LIMS). Acquiring such LIMS indeed can bring laboratory information management to a higher level, but most of the times this requires a sufficient investment of money, time and technical efforts. There is a clear need for a light weighted open source system which can easily be managed on local servers and handled by individual researchers. Here we present a software named SaDA for storing, retrieving and analyzing data originated from microorganism monitoring experiments. SaDA is fully integrated in the management of environmental samples, oligonucleotide sequences, microarray data and the subsequent downstream analysis procedures. It is simple and generic software, and can be extended and customized for various environmental and biomedical studies.

Implementation of a departmental picture archiving and communication system: a productivity and cost analysis.

PubMed

Macyszyn, Luke; Lega, Brad; Bohman, Leif-Erik; Latefi, Ahmad; Smith, Michelle J; Malhotra, Neil R; Welch, William; Grady, Sean M

2013-09-01

Digital radiology enhances productivity and results in long-term cost savings. However, the viewing, storage, and sharing of outside imaging studies on compact discs at ambulatory offices and hospitals pose a number of unique challenges to a surgeon's efficiency and clinical workflow. To improve the efficiency and clinical workflow of an academic neurosurgical practice when evaluating patients with outside radiological studies. Open-source software and commercial hardware were used to design and implement a departmental picture archiving and communications system (PACS). The implementation of a departmental PACS system significantly improved productivity and enhanced collaboration in a variety of clinical settings. Using published data on the rate of information technology problems associated with outside studies on compact discs, this system produced a cost savings ranging from $6250 to $33600 and from $43200 to $72000 for 2 cohorts, urgent transfer and spine clinic patients, respectively, therefore justifying the costs of the system in less than a year. The implementation of a departmental PACS system using open-source software is straightforward and cost-effective and results in significant gains in surgeon productivity when evaluating patients with outside imaging studies.

The CompreHensive collaborativE Framework (CHEF)

NASA Astrophysics Data System (ADS)

Knoop, P. A.; Hardin, J.; Killeen, T.; Middleton, D.

2002-12-01

Data integration, publication, and archiving have become important considerations in most fields of science as experiments and models increase in complexity, and the collaborations necessary to conduct the research grow broader. The development of well thought out strategies and standards for such data handling, however, only goes part way in supporting the scientific process. A primary driving force for such efforts is the need of scientists to access and work with data in a timely, reasonable, and often collaborative fashion. Internet-based collaborative environments are one way to help complete this picture, linking scientists to the data they seek and to one another (e.g., Towards a Robust, Agile, and Comprehensive Information Infrastructure for the Geosciences: A Strategic Plan For High Performance Simulation, NCAR, 2000, http://www.ncar.ucar.edu/Director/plan.pdf). The CompreHensive collaborativE Framework (CHEF, http://chefproject.org) is a generic, extensible, web-based, open-source environment for collaboration. CHEF's goal is to provide the basic building blocks from which a community can assemble a collaborative environment that fits their needs. The design of CHEF has been influenced by our experience developing the Space Physics and Aeronomy Research Collaboratory (SPARC, http://www.si.umich.edu/SPARC), which provides integrated access to a wide variety of heterogeneous data sources, including community-standardized data bases. The design has also been heavily influenced by our involvement with an effort to extract and codify the broad underlying technical and social elements that lead to successful collaboratories (http://www.scienceofcollaboratories.org). A collaborative environment is in itself also not the complete answer to data handling, rather, it provides a facilitating environment in which community efforts to integrate, publish, archive, and share data using standard formats and practices can be taken advantage of by the end-users, the scientists. We present examples of how CHEF and its predecessors are utilized in a wide variety of scientific communities, including engineering, chemistry, and the geosciences. In particular, we focus on CHEF's utilization by the earthquake engineering community, whose Network for Earthquake Engineering Simulation (NEES, http://www.nees.org) involves a community effort to develop data standards and practices. In this context NEES is using CHEF as the "integration" environment in which to place the "tools" that bring together scientists and data; this includes data browsers, meta-data search engines, real-time and archival data viewers, etc. By developing these tools within the CHEF framework and exposing the community-developed data standards to the framework, they automatically gain the features, functionality, and capabilities offered by the collaborative environment. We also explore how a collaborative environment, in conjunction with community developed standards and practices for data integration, publishing, and archiving, could benefit the ocean science community.

Twitter vs. Facebook: Using Social Media to Promote Collaborative Argumentation in an Online Classroom

ERIC Educational Resources Information Center

Owens, Marissa; Nussbaum, E. Michael

2017-01-01

This study aimed to: 1) evaluate Twitter as a viable tool for promoting collaborative argumentation; 2) determine if scripting through sentence openers promotes a greater number of arguments within an online discussion; and 3) compare Twitter to Facebook as viable tools for promoting collaborative argumentation. Participants were 27 undergraduate…

Institutional Collaboration on MOOCs in Education--A Literature Review

ERIC Educational Resources Information Center

Nortvig, Anne-Mette; Christiansen, René B.

2017-01-01

This literature review seeks to outline the state of the art regarding collaboration between educational institutions on Massive Open Online Courses (MOOCs) launched in Europe and in the US for the past 10 years. The review explores enablers and barriers that influence national institutional MOOC collaboration, and looks into how existing…

Doors Open: How Independent Schools Can Improve through Encouraging a Culture of Collaboration

ERIC Educational Resources Information Center

Wiggins, Alexis

2011-01-01

In this article, the author shares her experience teaching in international schools where she has worked in dynamic and collaborative cultures. The international school culture that she knew was one that valued collaboration, transparency, and equitability. The independent school culture is also one that values faculty's knowledge and passion in…

South African Teachers' Views of Collaboration within an Inclusive Education System

ERIC Educational Resources Information Center

Nel, Mirna; Engelbrecht, Petra; Nel, Norma; Tlale, Dan

2014-01-01

The development of sustainable collaborative partnerships between different role players within an inclusive education system seems to be a continuous challenge in South Africa. The focus of this research study was to understand how teachers view collaboration within an inclusive education system. Open-ended questionnaires were completed by 85…

Supporting open collaboration in science through explicit and linked semantic description of processes

USGS Publications Warehouse

Gil, Yolanda; Michel, Felix; Ratnakar, Varun; Read, Jordan S.; Hauder, Matheus; Duffy, Christopher; Hanson, Paul C.; Dugan, Hilary

2015-01-01

The Web was originally developed to support collaboration in science. Although scientists benefit from many forms of collaboration on the Web (e.g., blogs, wikis, forums, code sharing, etc.), most collaborative projects are coordinated over email, phone calls, and in-person meetings. Our goal is to develop a collaborative infrastructure for scientists to work on complex science questions that require multi-disciplinary contributions to gather and analyze data, that cannot occur without significant coordination to synthesize findings, and that grow organically to accommodate new contributors as needed as the work evolves over time. Our approach is to develop an organic data science framework based on a task-centered organization of the collaboration, includes principles from social sciences for successful on-line communities, and exposes an open science process. Our approach is implemented as an extension of a semantic wiki platform, and captures formal representations of task decomposition structures, relations between tasks and users, and other properties of tasks, data, and other relevant science objects. All these entities are captured through the semantic wiki user interface, represented as semantic web objects, and exported as linked data.

Scalable Collaborative Infrastructure for a Learning Healthcare System (SCILHS): architecture.

PubMed

Mandl, Kenneth D; Kohane, Isaac S; McFadden, Douglas; Weber, Griffin M; Natter, Marc; Mandel, Joshua; Schneeweiss, Sebastian; Weiler, Sarah; Klann, Jeffrey G; Bickel, Jonathan; Adams, William G; Ge, Yaorong; Zhou, Xiaobo; Perkins, James; Marsolo, Keith; Bernstam, Elmer; Showalter, John; Quarshie, Alexander; Ofili, Elizabeth; Hripcsak, George; Murphy, Shawn N

2014-01-01

We describe the architecture of the Patient Centered Outcomes Research Institute (PCORI) funded Scalable Collaborative Infrastructure for a Learning Healthcare System (SCILHS, http://www.SCILHS.org) clinical data research network, which leverages the $48 billion dollar federal investment in health information technology (IT) to enable a queryable semantic data model across 10 health systems covering more than 8 million patients, plugging universally into the point of care, generating evidence and discovery, and thereby enabling clinician and patient participation in research during the patient encounter. Central to the success of SCILHS is development of innovative 'apps' to improve PCOR research methods and capacitate point of care functions such as consent, enrollment, randomization, and outreach for patient-reported outcomes. SCILHS adapts and extends an existing national research network formed on an advanced IT infrastructure built with open source, free, modular components. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Development and classification of an operational definition of complementary and alternative medicine for the Cochrane Collaboration

PubMed Central

Wieland, L. Susan; Manheimer, Eric; Berman, Brian M.

2011-01-01

Over the past decade the Cochrane Collaboration has been an increasingly important source of information on complementary and alternative medicine (CAM) therapies. From 2007 to 2008 the Cochrane CAM Field developed a topics list that allowed us to categorize all 396 Cochrane reviews related to CAM (as of The Cochrane Library, Issue 4, 2009). This topics list is an advance in making Cochrane reviews on CAM topics accessible to the public. In this paper, we discuss challenges in developing the topics list, including developing an operational definition of CAM, deciding which reviews should be included within the CAM Field’s scope, developing the structured list of CAM Field-specific topics, and determining where in the topics list the reviews should be placed. Although aspects of our operational definition of CAM are open to revision, a standardized definition provides us with an objective, reproducible and systematic method for defining and classifying CAM therapies. PMID:21717826

3D-Lab: a collaborative web-based platform for molecular modeling.

PubMed

Grebner, Christoph; Norrby, Magnus; Enström, Jonatan; Nilsson, Ingemar; Hogner, Anders; Henriksson, Jonas; Westin, Johan; Faramarzi, Farzad; Werner, Philip; Boström, Jonas

2016-09-01

The use of 3D information has shown impact in numerous applications in drug design. However, it is often under-utilized and traditionally limited to specialists. We want to change that, and present an approach making 3D information and molecular modeling accessible and easy-to-use 'for the people'. A user-friendly and collaborative web-based platform (3D-Lab) for 3D modeling, including a blazingly fast virtual screening capability, was developed. 3D-Lab provides an interface to automatic molecular modeling, like conformer generation, ligand alignments, molecular dockings and simple quantum chemistry protocols. 3D-Lab is designed to be modular, and to facilitate sharing of 3D-information to promote interactions between drug designers. Recent enhancements to our open-source virtual reality tool Molecular Rift are described. The integrated drug-design platform allows drug designers to instantaneously access 3D information and readily apply advanced and automated 3D molecular modeling tasks, with the aim to improve decision-making in drug design projects.

The Earth System (ES-DOC) Project

NASA Astrophysics Data System (ADS)

Greenslade, Mark; Murphy, Sylvia; Treshansky, Allyn; DeLuca, Cecilia; Guilyardi, Eric; Denvil, Sebastien

2014-05-01

ESSI1.3 New Paradigms, Modelling, and International Collaboration Strategies for Earth System Sciences Earth System Documentation (ES-DOC) is an international project supplying tools & services in support of earth system documentation creation, analysis and dissemination. It is nurturing a sustainable standards based documentation eco-system that aims to become an integral part of the next generation of exa-scale dataset archives. ES-DOC leverages open source software and places end-user narratives at the heart of all it does. ES-DOC has initially focused upon nurturing the Earth System Model (ESM) documentation eco-system. Within this context ES-DOC leverages emerging documentation standards and supports the following projects: Coupled Model Inter-comparison Project Phase 5 (CMIP5); Dynamical Core Model Inter-comparison Project (DCMIP); National Climate Predictions and Projections Platforms Quantitative Evaluation of Downscaling Workshop. This presentation will introduce the project to a wider audience and demonstrate the range of tools and services currently available for use. It will also demonstrate how international collaborative efforts are essential to the success of ES-DOC.

HESS Opinions: Repeatable research: what hydrologistscan learn from the Duke cancer research scandal

USGS Publications Warehouse

Fienen, Michael; Bakker, Mark

2016-01-01

In the past decade, difficulties encountered in reproducing the results of a cancer study at Duke University resulted in a scandal and an investigation which concluded that tools used for data management, analysis, and modeling were inappropriate for the documentation of the study, let alone the reproduction of the results. New protocols were developed which require that data analysis and modeling be carried out with scripts that can be used to reproduce the results and are a record of all decisions and interpretations made during an analysis or a modeling effort. In the hydrological sciences, we face similar challenges and need to develop similar standards for transparency and repeatability of results. A promising route is to start making use of open-source languages (such as R and Python) to write scripts and to use collaborative coding environments (such as Git) to share our codes for inspection and use by the hydrological community. An important side-benefit to adopting such protocols is consistency and efficiency among collaborators.

GeoSci: Practices to Collaboratively Build Online Resources for Geophysics Education

NASA Astrophysics Data System (ADS)

Heagy, L. J.; Cockett, R.; Oldenburg, D.

2016-12-01

What happens when you apply best practices of software development to the development of educational resources? GeoSci (http://geosci.xyz) is our experiment examining this question. In 2007, a web-based "textbook" resource: Geophysics for Practicing Geoscientists (GPG, https://www.eoas.ubc.ca/courses/eosc350/content/index.htm) was created to serve as the primary resource for an undergraduate applied geophysics course at UBC taken primarily by non-geophysics majors. The web-based resource, allowed students to navigate through the concepts in a nonlinear way using hyperlinks, and enabled interactive content to be embedded. Subsequent to the web-based release for our UBC course, this resource has also seen widespread international use across the geophysical community. The available resources and best practices have advanced significantly since 2007. The format in which the GPG was originally developed (raw html and css) hindered improvements and thus maintenance and development of the resource was essentially reduced to correcting typos. Bringing this resource to sustainable state in which it can be built upon, edited and adapted has required looking to other disciplines such as software maintenance and development. By applying leading practices from open source software development, including versioning, testing, automated deployment as well as open development practices, such as issue tracking and employing creative commons licensing, we have worked to create a revamped GPG (http://gpg.geosci.xyz) that can be collaborated on and extended. The GPG and a companion resource for electromagnetics have been worked on by over 25 people, with much of the development happening in parallel. In this presentation, we will share our experience, identify what we see as some of the key learnings that have enabled collaboration in resource development, and present a vision for how we see these resources being sustained in the future.

Making progress with the automation of systematic reviews: principles of the International Collaboration for the Automation of Systematic Reviews (ICASR).

PubMed

Beller, Elaine; Clark, Justin; Tsafnat, Guy; Adams, Clive; Diehl, Heinz; Lund, Hans; Ouzzani, Mourad; Thayer, Kristina; Thomas, James; Turner, Tari; Xia, Jun; Robinson, Karen; Glasziou, Paul

2018-05-19

Systematic reviews (SR) are vital to health care, but have become complicated and time-consuming, due to the rapid expansion of evidence to be synthesised. Fortunately, many tasks of systematic reviews have the potential to be automated or may be assisted by automation. Recent advances in natural language processing, text mining and machine learning have produced new algorithms that can accurately mimic human endeavour in systematic review activity, faster and more cheaply. Automation tools need to be able to work together, to exchange data and results. Therefore, we initiated the International Collaboration for the Automation of Systematic Reviews (ICASR), to successfully put all the parts of automation of systematic review production together. The first meeting was held in Vienna in October 2015. We established a set of principles to enable tools to be developed and integrated into toolkits.This paper sets out the principles devised at that meeting, which cover the need for improvement in efficiency of SR tasks, automation across the spectrum of SR tasks, continuous improvement, adherence to high quality standards, flexibility of use and combining components, the need for a collaboration and varied skills, the desire for open source, shared code and evaluation, and a requirement for replicability through rigorous and open evaluation.Automation has a great potential to improve the speed of systematic reviews. Considerable work is already being done on many of the steps involved in a review. The 'Vienna Principles' set out in this paper aim to guide a more coordinated effort which will allow the integration of work by separate teams and build on the experience, code and evaluations done by the many teams working across the globe.

Bioconductor: open software development for computational biology and bioinformatics

PubMed Central

Gentleman, Robert C; Carey, Vincent J; Bates, Douglas M; Bolstad, Ben; Dettling, Marcel; Dudoit, Sandrine; Ellis, Byron; Gautier, Laurent; Ge, Yongchao; Gentry, Jeff; Hornik, Kurt; Hothorn, Torsten; Huber, Wolfgang; Iacus, Stefano; Irizarry, Rafael; Leisch, Friedrich; Li, Cheng; Maechler, Martin; Rossini, Anthony J; Sawitzki, Gunther; Smith, Colin; Smyth, Gordon; Tierney, Luke; Yang, Jean YH; Zhang, Jianhua

2004-01-01

The Bioconductor project is an initiative for the collaborative creation of extensible software for computational biology and bioinformatics. The goals of the project include: fostering collaborative development and widespread use of innovative software, reducing barriers to entry into interdisciplinary scientific research, and promoting the achievement of remote reproducibility of research results. We describe details of our aims and methods, identify current challenges, compare Bioconductor to other open bioinformatics projects, and provide working examples. PMID:15461798

Network of anatomical texts (NAnaTex), an open-source project for visualizing the interaction between anatomical terms.

PubMed

Momota, Ryusuke; Ohtsuka, Aiji

2018-01-01

Anatomy is the science and art of understanding the structure of the body and its components in relation to the functions of the whole-body system. Medicine is based on a deep understanding of anatomy, but quite a few introductory-level learners are overwhelmed by the sheer amount of anatomical terminology that must be understood, so they regard anatomy as a dull and dense subject. To help them learn anatomical terms in a more contextual way, we started a new open-source project, the Network of Anatomical Texts (NAnaTex), which visualizes relationships of body components by integrating text-based anatomical information using Cytoscape, a network visualization software platform. Here, we present a network of bones and muscles produced from literature descriptions. As this network is primarily text-based and does not require any programming knowledge, it is easy to implement new functions or provide extra information by making changes to the original text files. To facilitate collaborations, we deposited the source code files for the network into the GitHub repository ( https://github.com/ryusukemomota/nanatex ) so that anybody can participate in the evolution of the network and use it for their own non-profit purposes. This project should help not only introductory-level learners but also professional medical practitioners, who could use it as a quick reference.

Using Peer Feedback to Promote Reflection on Open-Ended Problems

NASA Astrophysics Data System (ADS)

Reinholz, Daniel L.; Dounas-Frazer, Dimitri R.

2016-09-01

This paper describes a new approach for learning from homework called Peer-Assisted Reflection (PAR). PAR involves students using peer feedback to improve their work on open-ended homework problems. Collaborating with peers and revising one's work based on the feedback of others are important aspects of doing and learning physics. While notable exceptions exist, homework and exams are generally individual activities that do not support collaboration and refinement, which misses important opportunities to use assessment for learning. In contrast, PAR provides students with a structure to iteratively engage with challenging, open-ended problems and solicit the input of their peers to improve their work.

NASA / GE Aviation Collaborative Partnership Research in Ultra High Bypass Cycle Propulsion Concepts

NASA Technical Reports Server (NTRS)

Hughes, Christopher E.; Zeug, Theresa

2008-01-01

Current collaborative research with General Electric Aviation on Open Rotor propulsion as part of the Subsonic Fixed Wing Project Ultra High Bypass Engine Partnership Element is discussed. The Subsonic Fixed Wing Project goals are reviewed, as well as their relative technology level compared to previous NASA noise program goals. The current Open Rotor propulsion research activity at NASA and GE are discussed including the contributions each entity bring toward the research project, and technical plans and objectives. GE Open Rotor propulsion technology and business plans currently and toward the future are also discussed, including the role the NASA SFW UHB partnership plays toward achieving those goals.

{open_quotes}Media-On-Demand{close_quotes} multimedia electronic mail: A tool for collaboration on the web

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsoi, Kei Nam; Rahman, S.M.

1996-12-31

Undoubtedly, multimedia electronic mail has many advantages in exchanging information electronically in a collaborative work. The existing design of e-mail systems architecture is inefficient in exchanging multimedia message which has much larger volume, and requires more bandwidth and storage space than the text-only messages. This paper presents an innovative method for exchanging multimedia mail messages in a heterogeneous environment to support collaborative work over YAW on the Internet. We propose a {open_quotes}Parcel Collection{close_quotes} approach for exchanging multimedia electronic mail messages. This approach for exchanging multimedia electronic mail messages integrates the current WWW technologies with the existing electronic mail systems.

NASA Human Health and Performance Center: Open innovation successes and collaborative projects

NASA Astrophysics Data System (ADS)

Richard, Elizabeth E.; Davis, Jeffrey R.

2014-11-01

In May 2007, what was then the Space Life Sciences Directorate published the 2007 Space Life Sciences Strategy for Human Space Exploration, setting the course for development and implementation of new business models and significant advances in external collaboration over the next five years. The strategy was updated on the basis of these accomplishments and reissued as the NASA Human Health and Performance Strategy in 2012, and continues to drive new approaches to innovation for the directorate. This short paper describes the successful execution of the strategy, driving organizational change through open innovation efforts and collaborative projects, including efforts of the NASA Human Health and Performance Center (NHHPC).

Grid Computing and Collaboration Technology in Support of Fusion Energy Sciences

NASA Astrophysics Data System (ADS)

Schissel, D. P.

2004-11-01

The SciDAC Initiative is creating a computational grid designed to advance scientific understanding in fusion research by facilitating collaborations, enabling more effective integration of experiments, theory and modeling, and allowing more efficient use of experimental facilities. The philosophy is that data, codes, analysis routines, visualization tools, and communication tools should be thought of as easy to use network available services. Access to services is stressed rather than portability. Services share the same basic security infrastructure so that stakeholders can control their own resources and helps ensure fair use of resources. The collaborative control room is being developed using the open-source Access Grid software that enables secure group-to-group collaboration with capabilities beyond teleconferencing including application sharing and control. The ability to effectively integrate off-site scientists into a dynamic control room will be critical to the success of future international projects like ITER. Grid computing, the secure integration of computer systems over high-speed networks to provide on-demand access to data analysis capabilities and related functions, is being deployed as an alternative to traditional resource sharing among institutions. The first grid computational service deployed was the transport code TRANSP and included tools for run preparation, submission, monitoring and management. This approach saves user sites from the laborious effort of maintaining a complex code while at the same time reducing the burden on developers by avoiding the support of a large number of heterogeneous installations. This tutorial will present the philosophy behind an advanced collaborative environment, give specific examples, and discuss its usage beyond FES.

Thyroid Cancer and Tumor Collaborative Registry (TCCR)

PubMed Central

Shats, Oleg; Goldner, Whitney; Feng, Jianmin; Sherman, Alexander; Smith, Russell B.; Sherman, Simon

2016-01-01

A multicenter, web-based Thyroid Cancer and Tumor Collaborative Registry (TCCR, http://tccr.unmc.edu) allows for the collection and management of various data on thyroid cancer (TC) and thyroid nodule (TN) patients. The TCCR is coupled with OpenSpecimen, an open-source biobank management system, to annotate biospecimens obtained from the TCCR subjects. The demographic, lifestyle, physical activity, dietary habits, family history, medical history, and quality of life data are provided and may be entered into the registry by subjects. Information on diagnosis, treatment, and outcome is entered by the clinical personnel. The TCCR uses advanced technical and organizational practices, such as (i) metadata-driven software architecture (design); (ii) modern standards and best practices for data sharing and interoperability (standardization); (iii) Agile methodology (project management); (iv) Software as a Service (SaaS) as a software distribution model (operation); and (v) the confederation principle as a business model (governance). This allowed us to create a secure, reliable, user-friendly, and self-sustainable system for TC and TN data collection and management that is compatible with various end-user devices and easily adaptable to a rapidly changing environment. Currently, the TCCR contains data on 2,261 subjects and data on more than 28,000 biospecimens. Data and biological samples collected by the TCCR are used in developing diagnostic, prevention, treatment, and survivorship strategies against TC. PMID:27168721

The SCEC Broadband Platform: A Collaborative Open-Source Software Package for Strong Ground Motion Simulation and Validation

NASA Astrophysics Data System (ADS)

Silva, F.; Maechling, P. J.; Goulet, C.; Somerville, P.; Jordan, T. H.

2013-12-01

The Southern California Earthquake Center (SCEC) Broadband Platform is a collaborative software development project involving SCEC researchers, graduate students, and the SCEC Community Modeling Environment. The SCEC Broadband Platform is open-source scientific software that can generate broadband (0-100Hz) ground motions for earthquakes, integrating complex scientific modules that implement rupture generation, low and high-frequency seismogram synthesis, non-linear site effects calculation, and visualization into a software system that supports easy on-demand computation of seismograms. The Broadband Platform operates in two primary modes: validation simulations and scenario simulations. In validation mode, the Broadband Platform runs earthquake rupture and wave propagation modeling software to calculate seismograms of a historical earthquake for which observed strong ground motion data is available. Also in validation mode, the Broadband Platform calculates a number of goodness of fit measurements that quantify how well the model-based broadband seismograms match the observed seismograms for a certain event. Based on these results, the Platform can be used to tune and validate different numerical modeling techniques. During the past year, we have modified the software to enable the addition of a large number of historical events, and we are now adding validation simulation inputs and observational data for 23 historical events covering the Eastern and Western United States, Japan, Taiwan, Turkey, and Italy. In scenario mode, the Broadband Platform can run simulations for hypothetical (scenario) earthquakes. In this mode, users input an earthquake description, a list of station names and locations, and a 1D velocity model for their region of interest, and the Broadband Platform software then calculates ground motions for the specified stations. By establishing an interface between scientific modules with a common set of input and output files, the Broadband Platform facilitates the addition of new scientific methods, which are written by earth scientists in a number of languages such as C, C++, Fortran, and Python. The Broadband Platform's modular design also supports the reuse of existing software modules as building blocks to create new scientific methods. Additionally, the Platform implements a wrapper around each scientific module, converting input and output files to and from the specific formats required (or produced) by individual scientific codes. Working in close collaboration with scientists and research engineers, the SCEC software development group continues to add new capabilities to the Broadband Platform and to release new versions as open-source scientific software distributions that can be compiled and run on many Linux computer systems. Our latest release includes the addition of 3 new simulation methods and several new data products, such as map and distance-based goodness of fit plots. Finally, as the number and complexity of scenarios simulated using the Broadband Platform increase, we have added batching utilities to substantially improve support for running large-scale simulations on computing clusters.

Coupled RipCAS-DFLOW (CoRD) Software and Data Management System for Reproducible Floodplain Vegetation Succession Modeling

NASA Astrophysics Data System (ADS)

Turner, M. A.; Miller, S.; Gregory, A.; Cadol, D. D.; Stone, M. C.; Sheneman, L.

2016-12-01

We present the Coupled RipCAS-DFLOW (CoRD) modeling system created to encapsulate the workflow to analyze the effects of stream flooding on vegetation succession. CoRD provides an intuitive command-line and web interface to run DFLOW and RipCAS in succession over many years automatically, which is a challenge because, for our application, DFLOW must be run on a supercomputing cluster via the PBS job scheduler. RipCAS is a vegetation succession model, and DFLOW is a 2D open channel flow model. Data adaptors have been developed to seamlessly connect DFLOW output data to be RipCAS inputs, and vice-versa. CoRD provides automated statistical analysis and visualization, plus automatic syncing of input and output files and model run metadata to the hydrological data management system HydroShare using its excellent Python REST client. This combination of technologies and data management techniques allows the results to be shared with collaborators and eventually published. Perhaps most importantly, it allows results to be easily reproduced via either the command-line or web user interface. This system is a result of collaboration between software developers and hydrologists participating in the Western Consortium for Watershed Analysis, Visualization, and Exploration (WC-WAVE). Because of the computing-intensive nature of this particular workflow, including automating job submission/monitoring and data adaptors, software engineering expertise is required. However, the hydrologists provide the software developers with a purpose and ensure a useful, intuitive tool is developed. Our hydrologists contribute software, too: RipCAS was developed from scratch by hydrologists on the team as a specialized, open-source version of the Computer Aided Simulation Model for Instream Flow and Riparia (CASiMiR) vegetation model; our hydrologists running DFLOW provided numerous examples and help with the supercomputing system. This project is written in Python, a popular language in the geosciences and a good beginner programming language, and is completely open source. It can be accessed at https://github.com/VirtualWatershed/CoRD with documentation available at http://virtualwatershed.github.io/CoRD. These facts enable continued development and use beyond the involvement of the current authors.

Designing a Resource Evolution Support System for Open Knowledge Communities

ERIC Educational Resources Information Center

Yang, Xianmin; Yu, Shengquan

2015-01-01

The continuous generation and evolution of digital learning resources is important for promoting open learning and meeting the personalized needs of learners. In the Web 2.0 era, open and collaborative authoring is becoming a popular method by which to create vast personalized learning resources in open knowledge communities (OKCs). However, the…

Data Products | Energy Analysis | NREL

Science.gov Websites

Project Finance Provides information on the Solar Access to Public Capital working group, Market Insights in the NSRDB Viewer. Open EI (Open Energy Information) OpenEI is a knowledge sharing online community efficiency. The Open PV Project A collaborative effort between government, industry, and the public to

Differentiating between Distance/Open Education Systems: Parameters for Comparison.

ERIC Educational Resources Information Center

Guri-Rozenblit, Sarah

1993-01-01

Suggests eight parameters as criteria for describing and comparing distance education/open learning institutions: target population, dimensions of openness, organizational structure, design and development of learning materials, use of advanced technology, teaching/tutoring system, student support systems, and interinstitutional collaboration. (35…

Opening the Classroom

ERIC Educational Resources Information Center

Watson, Richard T.; Boudreau, Marie-Claude; York, Paul T.; Greiner, Martina; Wynn, Donald E.

2008-01-01

We argue that information systems educators--and others in similarly dynamic professional disciplines--could benefit from an alternative infrastructure for learning. We present an "open classroom" model of education which expands upon Ferris' (2002) collaborative partnership model of education by integrating "open" technologies such as Wiki and…

Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration

PubMed Central

Gražulis, Saulius; Daškevič, Adriana; Merkys, Andrius; Chateigner, Daniel; Lutterotti, Luca; Quirós, Miguel; Serebryanaya, Nadezhda R.; Moeck, Peter; Downs, Robert T.; Le Bail, Armel

2012-01-01

Using an open-access distribution model, the Crystallography Open Database (COD, http://www.crystallography.net) collects all known ‘small molecule / small to medium sized unit cell’ crystal structures and makes them available freely on the Internet. As of today, the COD has aggregated ∼150 000 structures, offering basic search capabilities and the possibility to download the whole database, or parts thereof using a variety of standard open communication protocols. A newly developed website provides capabilities for all registered users to deposit published and so far unpublished structures as personal communications or pre-publication depositions. Such a setup enables extension of the COD database by many users simultaneously. This increases the possibilities for growth of the COD database, and is the first step towards establishing a world wide Internet-based collaborative platform dedicated to the collection and curation of structural knowledge. PMID:22070882

76 FR 17419 - Federal Health IT Strategic Plan: 2011-2015 Open Comment Period

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-29

... consultation with other appropriate Federal agencies and in collaboration with private and public entities. Work on the five-year Plan began more than a year ago and has included collaboration across federal...

Data Rescue in Collaboration with Federal Open Access Efforts

NASA Astrophysics Data System (ADS)

Avila, R.

2017-12-01

The recent calls to rescue scientific data is a real opportunity to collaborate with federal agencies which have been spending years managing research data and making it secure. The 2013 memos from the White House Office of Science and Technology Policy and Office of Management and Budget have spurred innovation across federal agencies to make publicly funded data accessible. Now is the time for stakeholders to take advantage of the groundwork laid by federal government, support the work to expand data sharing, thereby encouraging open science.

FOODIE: Farm-Oriented Open Data in Europe

NASA Astrophysics Data System (ADS)

Ángel Esbri Palomares, Miguel; Charvat, Karel; Campos, Antonio Manuel; Palma, Raúl

2014-05-01

The agriculture sector is a unique sector due to its strategic importance for both European citizens (consumers) and European economy (regional and global) which, ideally, should make the whole sector a network of interacting organizations. Rural areas are of particular importance with respect to the agro-food sector and should be specifically addressed within this scope. The different groups of stakeholders involved in the agricultural activities have to manage many different and heterogeneous sources of information that need to be combined in order to make economically and environmentally sound decisions, which include (among others) the definition of policies (subsidies, standardisation and regulation, national strategies for rural development, climate change), valuation of ecological performances, development of sustainable agriculture, crop recollection timing and pricing, plagues detection, etc. Such processes are very labour intensive because most parts have to be executed manually and the necessary information is not always available or easily accessible. In this context, future agriculture knowledge management systems have to support not only direct profitability of agriculture or environment protection, but also activities of individuals and groups allowing effective collaboration among groups in agri-food industry, consumers, public administrations and wider stakeholders communities, especially in rural domain. To that end FOODIE project aims at building an open and interoperable agricultural specialized platform hub on the cloud for the management of spatial and non-spatial data relevant for farming production; for discovery of spatial and non-spatial agriculture related data from heterogeneous sources; integration of existing and valuable European open datasets related to agriculture; data publication and data linking of external agriculture data sources contributed by different public and private stakeholders allowing to provide specific and high-value applications and services for the support in the planning and decision-making processes of different stakeholders groups related to the agricultural and environmental domains.

The Imaging X-Ray Polarimetry Explorer (IXPE)

NASA Technical Reports Server (NTRS)

Weisskopf, Martin C.; Ramsey, Brian; O’Dell, Stephen; Tennant, Allyn; Elsner, Ronald; Soffita, Paolo; Bellazzini, Ronaldo; Costa, Enrico; Kolodziejczak, Jeffery; Kaspi, Victoria;

LIGO-India: expanding the international network of gravitational wave detectors

NASA Astrophysics Data System (ADS)

Iyer, Balasubramanian

2015-04-01

The first detection of Gravitational Waves (GW) by ground based detectors will open up a fundamentally new observational window to the Universe with implications for astrophysics and eventually cosmology and fundamental physics. The realization of GW astronomy requires a global network of Advanced GW detectors including upcoming observatories like KAGRA (Japan) and LIGO-India to provide good sky localization of the GW sources. LIGO-India is expected to play a key role in locating and deciphering the sources contributing to the GW symphony. The current status of LIGO-India project and the exciting future research opportunities of this ambitious Indo-US collaboration in science, technology and computation will be finally indicated. Acknowledge CISA and APS for the Award of a APS Beller Lectureship. BRI supported by the AIRBUS Group Corporate Foundation through a visiting professorship, which is part of the ``Mathematics of Complex Systems'' chair at ICTS.

TCGA Third Annual Scientific Symposium - TCGA

Cancer.gov

Monday, May 12 - Tuesday, May 13, 2014 National Institutes of Health, Bethesda, Md. This open scientific meeting will consist of collaborative workshops, poster sessions, and plenary sessions. Registration is now open.

Developing field emission electron sources based on ultrananocrystalline diamond for accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baryshev, Sergey V.; Jing, Chunguang; Qiu, Jiaqi

Radiofrequency (RF) electron guns work by establishing an RF electromagnetic field inside a cavity having conducting walls. Electrons from a cathode are generated in the injector and immediately become accelerated by the RF electric field, and exit the gun as a series of electron bunches. Finding simple solutions for electron injection is a long standing problem. While energies of 30-50 MeV are achievable in linear accelerators (linacs), finding an electron source able to survive under MW electric loads and provide an average current of 1-10 mA is important. Meeting these requirements would open various linac applications for industry. The naturalmore » way to simplify and integrate RF injector architectures with the electron source would be to place the source directly into the RF cavity with no need for additional heaters/lasers. Euclid TechLabs in collaboration with Argonne National Lab are prototyping a family of highly effective field emission electron sources based on a nitrogen-incorporated ultrananocrystalline diamond ((N)UNCD) platform. Determined metrics suggest that our emitters are emissive enough to meet requirements for magnetized cooling at electron-ion colliders, linac-based radioisotope production and X-ray sterilization, and others.« less

Science and Software

NASA Astrophysics Data System (ADS)

Zelt, C. A.

2017-12-01

Earth science attempts to understand how the earth works. This research often depends on software for modeling, processing, inverting or imaging. Freely sharing open-source software is essential to prevent reinventing the wheel and allows software to be improved and applied in ways the original author may never have envisioned. For young scientists, releasing software can increase their name ID when applying for jobs and funding, and create opportunities for collaborations when scientists who collect data want the software's creator to be involved in their project. However, we frequently hear scientists say software is a tool, it's not science. Creating software that implements a new or better way of earth modeling or geophysical processing, inverting or imaging should be viewed as earth science. Creating software for things like data visualization, format conversion, storage, or transmission, or programming to enhance computational performance, may be viewed as computer science. The former, ideally with an application to real data, can be published in earth science journals, the latter possibly in computer science journals. Citations in either case should accurately reflect the impact of the software on the community. Funding agencies need to support more software development and open-source releasing, and the community should give more high-profile awards for developing impactful open-source software. Funding support and community recognition for software development can have far reaching benefits when the software is used in foreseen and unforeseen ways, potentially for years after the original investment in the software development. For funding, an open-source release that is well documented should be required, with example input and output files. Appropriate funding will provide the incentive and time to release user-friendly software, and minimize the need for others to duplicate the effort. All funded software should be available through a single web site, ideally maintained by someone in a funded position. Perhaps the biggest challenge is the reality that researches who use software, as opposed to develop software, are more attractive university hires because they are more likely to be "big picture" scientists that publish in the highest profile journals, although sometimes the two go together.

A Balanced Scorecard for Open Innovation: Measuring the Impact of Industry-University Collaboration

NASA Astrophysics Data System (ADS)

Flores, Myrna; Al-Ashaab, Ahmed; Magyar, Andrea

The Balanced Scorecard (BSC) can be considered as a strategic measurement tool. Since its first publication by Norton and Kaplan in the early 1990’s, many companies have applied it to measure four key aspects of their organisations’ performance: Financial, Customer, Internal Business Process, Learning and Growth. Although it is widely used in the business arena, this original BSC was not developed to assess the impact of collaborative research projects under an open innovation strategy, where the outputs of research and development (R&D) developed by collaborative projects undertaken by industry and universities should be measured in a different way. In fact, many companies are losing important opportunities to spur their R&D results by not being able to quantify the results of such collaborations. Therefore, this paper will propose a Scorecard to measure the outcomes of collaborative research. It is important to recall that this scorecard has been developed during a collaborative research project by CEMEX Research Group AG (Switzerland) and Cranfield University (UK). During such project, a survey was developed to carry out eleven face-to-face interviews in a sample of ten companies in UK, which provided important inputs to design such strategic scorecard. It was confirmed that a collaborative balanced scorecard is a very useful tool to measure, track and improve the impact of conducting collaborative projects with universities.

Comment on "Characterizing the population of pulsars in the Galactic bulge with the Fermi large area telescope" [arXiv:1705.00009v1

NASA Astrophysics Data System (ADS)

Bartels, Richard; Hooper, Dan; Linden, Tim; Mishra-Sharma, Siddharth; Rodd, Nicholas L.; Safdi, Benjamin R.; Slatyer, Tracy R.

2018-06-01

The Fermi-LAT Collaboration recently presented a new catalog of gamma-ray sources located within the 40 ° × 40 ° region around the Galactic Center Ajello et al. (2017) - the Second Fermi Inner Galaxy (2FIG) catalog. Utilizing this catalog, they analyzed models for the spatial distribution and luminosity function of sources with a pulsar-like gamma-ray spectrum. Ajello et al. (2017) v1 also claimed to detect, in addition to a disk-like population of pulsar-like sources, an approximately 7 σ preference for an additional centrally concentrated population of pulsar-like sources, which they referred to as a "Galactic Bulge" population. Such a population would be of great interest, as it would support a pulsar interpretation of the gamma-ray excess that has long been observed in this region. In an effort to further explore the implications of this new source catalog, we attempted to reproduce the results presented by the Fermi-LAT Collaboration, but failed to do so. Mimicking as closely as possible the analysis techniques undertaken in Ajello et al. (2017), we instead find that our likelihood analysis favors a very different spatial distribution and luminosity function for these sources. Most notably, our results do not exhibit a strong preference for a "Galactic Bulge" population of pulsars. Furthermore, we find that masking the regions immediately surrounding each of the 2FIG pulsar candidates does not significantly impact the spectrum or intensity of the Galactic Center gamma-ray excess. Although these results refute the claim of strong evidence for a centrally concentrated pulsar population presented in Ajello et al. (2017), they neither rule out nor provide support for the possibility that the Galactic Center excess is generated by a population of low-luminosity and currently largely unobserved pulsars. In a spirit of maximal openness and transparency, we have made our analysis code available at https://github.com/bsafdi/GCE-2FIG.

Conceptions and Expectations of Research Collaboration in the European Social Sciences: Research Policies, Institutional Contexts and the Autonomy of the Scientific Field

ERIC Educational Resources Information Center

Lebeau, Yann; Papatsiba, Vassiliki

2016-01-01

This paper investigates the interactions between policy drivers and academic practice in international research collaboration. It draws on the case of the Open Research Area (ORA), a funding scheme in the social sciences across four national research agencies, seeking to boost collaboration by supporting "integrated" projects. The paper…

The Open Spectral Database: an open platform for sharing and searching spectral data.

PubMed

Chalk, Stuart J

2016-01-01

A number of websites make available spectral data for download (typically as JCAMP-DX text files) and one (ChemSpider) that also allows users to contribute spectral files. As a result, searching and retrieving such spectral data can be time consuming, and difficult to reuse if the data is compressed in the JCAMP-DX file. What is needed is a single resource that allows submission of JCAMP-DX files, export of the raw data in multiple formats, searching based on multiple chemical identifiers, and is open in terms of license and access. To address these issues a new online resource called the Open Spectral Database (OSDB) http://osdb.info/ has been developed and is now available. Built using open source tools, using open code (hosted on GitHub), providing open data, and open to community input about design and functionality, the OSDB is available for anyone to submit spectral data, making it searchable and available to the scientific community. This paper details the concept and coding, internal architecture, export formats, Representational State Transfer (REST) Application Programming Interface and options for submission of data. The OSDB website went live in November 2015. Concurrently, the GitHub repository was made available at https://github.com/stuchalk/OSDB/, and is open for collaborators to join the project, submit issues, and contribute code. The combination of a scripting environment (PHPStorm), a PHP Framework (CakePHP), a relational database (MySQL) and a code repository (GitHub) provides all the capabilities to easily develop REST based websites for ingestion, curation and exposure of open chemical data to the community at all levels. It is hoped this software stack (or equivalent ones in other scripting languages) will be leveraged to make more chemical data available for both humans and computers.

Implementation of supply chain business application through business model canvas and waterfall framework collaborations for fish farmers SMEs in ulekan market bandung

NASA Astrophysics Data System (ADS)

Priyadi, Y.; Prasetio, A.

2018-03-01

This research resulted in the development of e-SCM application, in small-scale group of fish farmers based on Open Source technology in Ulekan Market Bandung, by collaborating the implementation of e-SCM and Data Management. Then proceed with the application of supply chain business through collaboration Business Model Canvas and Waterfall Framework. For the design of business process reengineering in this activity, it produces a context diagram called e-SCM SME Fish consisting of five entities directly involved with the system, namely: fish shop supervisor, fish shop retailer, employees, fish farmers, and customers. Referring to the Context Diagram, decomposition process of Level 0 e-SCM SMEs Fish. The decomposition results in Data Flow Diagram Level 1 for four sub processes, namely: business partners, transactions, retailer stock, and documentation. Result of nine blocks on Business Model Canvas on e-SCM activity, its category consist of Priority 1, Priority 2, Direct, Indirect, Purchase/e-SCM, Transactional, Community, Asset Sale, Physical Asset, Human, Production, Strategic Alliance -competitors, Coopetition, Buyer supplier relationship, Fixed Cost, Variable Cost. For integration of data management on Localhost Server media on e-SCM using http://whyphi: 8080 address, as prototype which will soon be adopted by farmer fish farmer.

3rd Annual Earth System Grid Federation and 3rd Annual Earth System Grid Federation and Ultrascale Visualization Climate Data Analysis Tools Face-to-Face Meeting Report December 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Dean N.

The climate and weather data science community gathered December 3–5, 2013, at Lawrence Livermore National Laboratory, in Livermore, California, for the third annual Earth System Grid Federation (ESGF) and Ultra-scale Visualization Climate Data Analysis Tools (UV-CDAT) Face-to-Face (F2F) Meeting, which was hosted by the Department of Energy, National Aeronautics and Space Administration, National Oceanic and Atmospheric Administration, the European Infrastructure for the European Network of Earth System Modelling, and the Australian Department of Education. Both ESGF and UV-CDAT are global collaborations designed to develop a new generation of open-source software infrastructure that provides distributed access and analysis to observed andmore » simulated data from the climate and weather communities. The tools and infrastructure developed under these international multi-agency collaborations are critical to understanding extreme weather conditions and long-term climate change, while the F2F meetings help to build a stronger climate and weather data science community and stronger federated software infrastructure. The 2013 F2F meeting determined requirements for existing and impending national and international community projects; enhancements needed for data distribution, analysis, and visualization infrastructure; and standards and resources needed for better collaborations.« less

Opening up the Collaborative Problem-Solving Process to Solvers

ERIC Educational Resources Information Center

Robison, Tyler

2013-01-01

In software systems, having features of openness means that some of the internal components of the system are made available for examination by users. Researchers have looked at different effects of open systems a great deal in the area of educational technology, but also in areas outside of education. Properly used, openness has the potential to…

LCTLs and Technology: The Promise of Open Education

ERIC Educational Resources Information Center

Blyth, Carl

2013-01-01

LCTL educators are beginning to participate in the Open Education movement by developing and sharing their own pedagogical materials referred to as open educational resources (OERs). This new generation of collaborative LCTL materials will invariably challenge longstanding hegemonies in the fields of foreign language education and educational…

40 CFR Table 3 to Subpart Wwww of... - Organic HAP Emissions Limits for Existing Open Molding Sources, New Open Molding Sources Emitting...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Existing Open Molding Sources, New Open Molding Sources Emitting Less Than 100 TPY of HAP, and New and... CATEGORIES National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites... Existing Open Molding Sources, New Open Molding Sources Emitting Less Than 100 TPY of HAP, and New and...

Enabling a systems biology knowledgebase with gaggle and firegoose

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baliga, Nitin S.

The overall goal of this project was to extend the existing Gaggle and Firegoose systems to develop an open-source technology that runs over the web and links desktop applications with many databases and software applications. This technology would enable researchers to incorporate workflows for data analysis that can be executed from this interface to other online applications. The four specific aims were to (1) provide one-click mapping of genes, proteins, and complexes across databases and species; (2) enable multiple simultaneous workflows; (3) expand sophisticated data analysis for online resources; and enhance open-source development of the Gaggle-Firegoose infrastructure. Gaggle is anmore » open-source Java software system that integrates existing bioinformatics programs and data sources into a user-friendly, extensible environment to allow interactive exploration, visualization, and analysis of systems biology data. Firegoose is an extension to the Mozilla Firefox web browser that enables data transfer between websites and desktop tools including Gaggle. In the last phase of this funding period, we have made substantial progress on development and application of the Gaggle integration framework. We implemented the workspace to the Network Portal. Users can capture data from Firegoose and save them to the workspace. Users can create workflows to start multiple software components programmatically and pass data between them. Results of analysis can be saved to the cloud so that they can be easily restored on any machine. We also developed the Gaggle Chrome Goose, a plugin for the Google Chrome browser in tandem with an opencpu server in the Amazon EC2 cloud. This allows users to interactively perform data analysis on a single web page using the R packages deployed on the opencpu server. The cloud-based framework facilitates collaboration between researchers from multiple organizations. We have made a number of enhancements to the cmonkey2 application to enable and improve the integration within different environments, and we have created a new tools pipeline for generating EGRIN2 models in a largely automated way.« less

The SCEC/UseIT Intern Program: Creating Open-Source Visualization Software Using Diverse Resources

NASA Astrophysics Data System (ADS)

Francoeur, H.; Callaghan, S.; Perry, S.; Jordan, T.

2004-12-01

The Southern California Earthquake Center undergraduate IT intern program (SCEC UseIT) conducts IT research to benefit collaborative earth science research. Through this program, interns have developed real-time, interactive, 3D visualization software using open-source tools. Dubbed LA3D, a distribution of this software is now in use by the seismic community. LA3D enables the user to interactively view Southern California datasets and models of importance to earthquake scientists, such as faults, earthquakes, fault blocks, digital elevation models, and seismic hazard maps. LA3D is now being extended to support visualizations anywhere on the planet. The new software, called SCEC-VIDEO (Virtual Interactive Display of Earth Objects), makes use of a modular, plugin-based software architecture which supports easy development and integration of new data sets. Currently SCEC-VIDEO is in beta testing, with a full open-source release slated for the future. Both LA3D and SCEC-VIDEO were developed using a wide variety of software technologies. These, which included relational databases, web services, software management technologies, and 3-D graphics in Java, were necessary to integrate the heterogeneous array of data sources which comprise our software. Currently the interns are working to integrate new technologies and larger data sets to increase software functionality and value. In addition, both LA3D and SCEC-VIDEO allow the user to script and create movies. Thus program interns with computer science backgrounds have been writing software while interns with other interests, such as cinema, geology, and education, have been making movies that have proved of great use in scientific talks, media interviews, and education. Thus, SCEC UseIT incorporates a wide variety of scientific and human resources to create products of value to the scientific and outreach communities. The program plans to continue with its interdisciplinary approach, increasing the relevance of the software and expanding its use in the scientific community.

Defining Success in Open Science

PubMed Central

Ali-Khan, Sarah E.; Jean, Antoine; MacDonald, Emily; Gold, E. Richard

2018-01-01

Mounting evidence indicates that worldwide, innovation systems are increasing unsustainable. Equally, concerns about inequities in the science and innovation process, and in access to its benefits, continue. Against a backdrop of growing health, economic and scientific challenges global stakeholders are urgently seeking to spur innovation and maximize the just distribution of benefits for all. Open Science collaboration (OS) – comprising a variety of approaches to increase open, public, and rapid mobilization of scientific knowledge – is seen to be one of the most promising ways forward. Yet, many decision-makers hesitate to construct policy to support the adoption and implementation of OS without access to substantive, clear and reliable evidence. In October 2017, international thought-leaders gathered at an Open Science Leadership Forum in the Washington DC offices of the Bill and Melinda Gates Foundation to share their views on what successful Open Science looks like. Delegates from developed and developing nations, national governments, science agencies and funding bodies, philanthropy, researchers, patient organizations and the biotechnology, pharma and artificial intelligence (AI) industries discussed the outcomes that would rally them to invest in OS, as well as wider issues of policy and implementation. This first of two reports, summarizes delegates' views on what they believe OS will deliver in terms of research, innovation and social impact in the life sciences. Through open and collaborative process over the next months, we will translate these success outcomes into a toolkit of quantitative and qualitative indicators to assess when, where and how open science collaborations best advance research, innovation and social benefit. Ultimately, this work aims to develop and openly share tools to allow stakeholders to evaluate and re-invent their innovation ecosystems, to maximize value for the global public and patients, and address long-standing questions about the mechanics of innovation. PMID:29553146

Defining Success in Open Science.

PubMed

Ali-Khan, Sarah E; Jean, Antoine; MacDonald, Emily; Gold, E Richard

2018-01-01

Mounting evidence indicates that worldwide, innovation systems are increasing unsustainable. Equally, concerns about inequities in the science and innovation process, and in access to its benefits, continue. Against a backdrop of growing health, economic and scientific challenges global stakeholders are urgently seeking to spur innovation and maximize the just distribution of benefits for all. Open Science collaboration (OS) - comprising a variety of approaches to increase open, public, and rapid mobilization of scientific knowledge - is seen to be one of the most promising ways forward. Yet, many decision-makers hesitate to construct policy to support the adoption and implementation of OS without access to substantive, clear and reliable evidence. In October 2017, international thought-leaders gathered at an Open Science Leadership Forum in the Washington DC offices of the Bill and Melinda Gates Foundation to share their views on what successful Open Science looks like. Delegates from developed and developing nations, national governments, science agencies and funding bodies, philanthropy, researchers, patient organizations and the biotechnology, pharma and artificial intelligence (AI) industries discussed the outcomes that would rally them to invest in OS, as well as wider issues of policy and implementation. This first of two reports, summarizes delegates' views on what they believe OS will deliver in terms of research, innovation and social impact in the life sciences. Through open and collaborative process over the next months, we will translate these success outcomes into a toolkit of quantitative and qualitative indicators to assess when, where and how open science collaborations best advance research, innovation and social benefit. Ultimately, this work aims to develop and openly share tools to allow stakeholders to evaluate and re-invent their innovation ecosystems, to maximize value for the global public and patients, and address long-standing questions about the mechanics of innovation.

Educational opportunities based on the university-industry synergies in an open innovation framework

NASA Astrophysics Data System (ADS)

Lucia, Óscar; Burdio, José M.; Acero, Jesús; Barragán, Luis A.; Garcia, José R.

2012-03-01

Collaboration between Industry and University is becoming more important in order to improve the competitiveness of the research and development activities. Moreover, establishing synergies to bridge the gap between the academic and industrial spheres has demonstrated to be advantageous for both of them. Nowadays, Industry is moving towards an open innovation structure, in which external agents as universities play a key role. Besides, University is also seeking a more active learning methodology to improve the education of students for the real world. Considering this framework, a special effort should be done to take advantage of the collaborative work between Industry and University. The aim of this paper is to present the collaborative framework and the benefits obtained of the educational activities as a consequence of the long-term collaboration established between the University of Zaragoza and the Bosh and Siemens Home Appliances Group. The key stones of the collaboration are presented, and the positive outcomes for the students are highlighted. The strengths, weaknesses, opportunities, and threats of the proposed program are also discussed.

Collaborators | Office of Cancer Genomics

Cancer.gov

The TARGET initiative is jointly managed within the National Cancer Institute (NCI) by the Office of Cancer Genomics (OCG)Opens in a New Tab and the Cancer Therapy Evaluation Program (CTEP)Opens in a New Tab.

This presentation will discuss how PLOS ONE collaborates with many different scientific communities to help create, share, and preserve the scholarly works produced by their researchers with emphasis on current common difficulties faced by communities, practical solutions, and a broader view of the importance of open data and reproducibility.

NASA Astrophysics Data System (ADS)

Kroffe, K.

2017-12-01

The mission of the Public Library of Science is to accelerate progress in science and medicine by leading a transformation in research communication. Researchers' ability to share their work without restriction is essential, but critical to sharing is open data, transparency in peer review, and an open approach to science assessment. In this session, we will discuss how PLOS ONE collaborates with many different scientific communities to help create, share, and preserve the scholarly works produced by their researchers with emphasis on current common difficulties faced by communities, practical solutions, and a broader view of the importance of open data and reproducibility.

Networks of open systems

NASA Astrophysics Data System (ADS)

Lerman, Eugene

2018-08-01

Many systems of interest in science and engineering are made up of interacting subsystems. These subsystems, in turn, could be made up of collections of smaller interacting subsystems and so on. In a series of papers David Spivak with collaborators formalized these kinds of structures (systems of systems) as algebras over presentable colored operads (Spivak, 2013; Rupel and Spivak, 2013; Vagner et al., 2015). It is also very useful to consider maps between dynamical systems. This is the point of view taken by DeVille and Lerman in the study of dynamics on networks (DeVille and Lerman, 2015 [4,5]; DeVille and Lerman, 2010). The work of DeVille and Lerman was inspired by the coupled cell networks of Golubitsky, Stewart and their collaborators (Stewart et al., 2003; Golubitsky et al., 2005; Golubitsky and Stewart, 2006). The goal of this paper is to describe an algebraic structure that encompasses both approaches to systems of systems. More specifically we define a double category of open systems and construct a functor from this double category to the double category of vector spaces, linear maps and linear relations. This allows us, on one hand, to build new open systems out of collections of smaller open subsystems and on the other to keep track of maps between open systems. Consequently we obtain synchrony results for open systems which generalize the synchrony results of Golubitsky, Stewart and their collaborators for groupoid invariant vector fields on coupled cell networks.

Reimagining the microscope in the 21(st) century using the scalable adaptive graphics environment.

PubMed

Mateevitsi, Victor; Patel, Tushar; Leigh, Jason; Levy, Bruce

2015-01-01

Whole-slide imaging (WSI), while technologically mature, remains in the early adopter phase of the technology adoption lifecycle. One reason for this current situation is that current methods of visualizing and using WSI closely follow long-existing workflows for glass slides. We set out to "reimagine" the digital microscope in the era of cloud computing by combining WSI with the rich collaborative environment of the Scalable Adaptive Graphics Environment (SAGE). SAGE is a cross-platform, open-source visualization and collaboration tool that enables users to access, display and share a variety of data-intensive information, in a variety of resolutions and formats, from multiple sources, on display walls of arbitrary size. A prototype of a WSI viewer app in the SAGE environment was created. While not full featured, it enabled the testing of our hypothesis that these technologies could be blended together to change the essential nature of how microscopic images are utilized for patient care, medical education, and research. Using the newly created WSI viewer app, demonstration scenarios were created in the patient care and medical education scenarios. This included a live demonstration of a pathology consultation at the International Academy of Digital Pathology meeting in Boston in November 2014. SAGE is well suited to display, manipulate and collaborate using WSIs, along with other images and data, for a variety of purposes. It goes beyond how glass slides and current WSI viewers are being used today, changing the nature of digital pathology in the process. A fully developed WSI viewer app within SAGE has the potential to encourage the wider adoption of WSI throughout pathology.

Reimagining the microscope in the 21st century using the scalable adaptive graphics environment

PubMed Central

Mateevitsi, Victor; Patel, Tushar; Leigh, Jason; Levy, Bruce

2015-01-01

Background: Whole-slide imaging (WSI), while technologically mature, remains in the early adopter phase of the technology adoption lifecycle. One reason for this current situation is that current methods of visualizing and using WSI closely follow long-existing workflows for glass slides. We set out to “reimagine” the digital microscope in the era of cloud computing by combining WSI with the rich collaborative environment of the Scalable Adaptive Graphics Environment (SAGE). SAGE is a cross-platform, open-source visualization and collaboration tool that enables users to access, display and share a variety of data-intensive information, in a variety of resolutions and formats, from multiple sources, on display walls of arbitrary size. Methods: A prototype of a WSI viewer app in the SAGE environment was created. While not full featured, it enabled the testing of our hypothesis that these technologies could be blended together to change the essential nature of how microscopic images are utilized for patient care, medical education, and research. Results: Using the newly created WSI viewer app, demonstration scenarios were created in the patient care and medical education scenarios. This included a live demonstration of a pathology consultation at the International Academy of Digital Pathology meeting in Boston in November 2014. Conclusions: SAGE is well suited to display, manipulate and collaborate using WSIs, along with other images and data, for a variety of purposes. It goes beyond how glass slides and current WSI viewers are being used today, changing the nature of digital pathology in the process. A fully developed WSI viewer app within SAGE has the potential to encourage the wider adoption of WSI throughout pathology. PMID:26110092

Big Software for Big Data: Scaling Up Photometry for LSST (Abstract)

NASA Astrophysics Data System (ADS)

Rawls, M.

2017-06-01

(Abstract only) The Large Synoptic Survey Telescope (LSST) will capture mosaics of the sky every few nights, each containing more data than your computer's hard drive can store. As a result, the software to process these images is as critical to the science as the telescope and the camera. I discuss the algorithms and software being developed by the LSST Data Management team to handle such a large volume of data. All of our work is open source and available to the community. Once LSST comes online, our software will produce catalogs of objects and a stream of alerts. These will bring exciting new opportunities for follow-up observations and collaborations with LSST scientists.

Shared Medical Imaging Repositories.

PubMed

Lebre, Rui; Bastião, Luís; Costa, Carlos

2018-01-01

This article describes the implementation of a solution for the integration of ownership concept and access control over medical imaging resources, making possible the centralization of multiple instances of repositories. The proposed architecture allows the association of permissions to repository resources and delegation of rights to third entities. It includes a programmatic interface for management of proposed services, made available through web services, with the ability to create, read, update and remove all components resulting from the architecture. The resulting work is a role-based access control mechanism that was integrated with Dicoogle Open-Source Project. The solution has several application scenarios like, for instance, collaborative platforms for research and tele-radiology services deployed at Cloud.

Integrating Space Communication Network Capabilities via Web Portal Technologies

NASA Technical Reports Server (NTRS)

Johnston, Mark D.; Lee, Carlyn-Ann; Lau, Chi-Wung; Cheung, Kar-Ming; Levesque, Michael; Carruth, Butch; Coffman, Adam; Wallace, Mike

2014-01-01

We have developed a service portal prototype as part of an investigation into the feasibility of using Java portlet technology as a means of providing integrated access to NASA communications network services. Portal servers provide an attractive platform for this role due to the various built-in collaboration applications they can provide, combined with the possibility to develop custom inter-operating portlets to extent their functionality while preserving common presentation and behavior. This paper describes various options for integration of network services related to planning and scheduling, and results based on use of a popular open-source portal framework. Plans are underway to develop an operational SCaN Service Portal, building on the experiences reported here.

The Palladiolibrary Geo-Models AN Open 3d Archive to Manage and Visualize Information-Communication Resources about Palladio

NASA Astrophysics Data System (ADS)

Apollonio, F. I.; Baldissini, S.; Clini, P.; Gaiani, M.; Palestini, C.; Trevisan, C.

2013-07-01

The paper describes objectives, methods, procedures and outcomes of the development of the digital archive of Palladio works and documentation: the PALLADIOLibrary of Centro Internazionale di Studi di Architettura Andrea Palladio di Vicenza (CISAAP). The core of the application consists of fifty-one reality-based 3D models usable and navigable within a system grounded on GoogleEarth. This information system, a collaboration of four universities bearers of specific skills returns a comprehensive, structured and coherent semantic interpretation of Palladian landscape through shapes realistically reconstructed from historical sources and surveys and treated for GE with Ambient Occlusion techniques, overcoming the traditional display mode.

NREL: International Activities - Assessments and Tools

Science.gov Websites

for Solar and Wind Energy, a collaborative, open-architecture project led by the International Renewable Energy Agency (IRENA) for Multilateral Solar and Wind Working Group of the Clean Energy associated with integrating variable renewable energy into the power grid. OpenEI: Open Energy Information

Wikis, blogs and podcasts: a new generation of Web-based tools for virtual collaborative clinical practice and education.

PubMed

Boulos, Maged N Kamel; Maramba, Inocencio; Wheeler, Steve

2006-08-15

We have witnessed a rapid increase in the use of Web-based 'collaborationware' in recent years. These Web 2.0 applications, particularly wikis, blogs and podcasts, have been increasingly adopted by many online health-related professional and educational services. Because of their ease of use and rapidity of deployment, they offer the opportunity for powerful information sharing and ease of collaboration. Wikis are Web sites that can be edited by anyone who has access to them. The word 'blog' is a contraction of 'Web Log' - an online Web journal that can offer a resource rich multimedia environment. Podcasts are repositories of audio and video materials that can be "pushed" to subscribers, even without user intervention. These audio and video files can be downloaded to portable media players that can be taken anywhere, providing the potential for "anytime, anywhere" learning experiences (mobile learning). Wikis, blogs and podcasts are all relatively easy to use, which partly accounts for their proliferation. The fact that there are many free and Open Source versions of these tools may also be responsible for their explosive growth. Thus it would be relatively easy to implement any or all within a Health Professions' Educational Environment. Paradoxically, some of their disadvantages also relate to their openness and ease of use. With virtually anybody able to alter, edit or otherwise contribute to the collaborative Web pages, it can be problematic to gauge the reliability and accuracy of such resources. While arguably, the very process of collaboration leads to a Darwinian type 'survival of the fittest' content within a Web page, the veracity of these resources can be assured through careful monitoring, moderation, and operation of the collaborationware in a closed and secure digital environment. Empirical research is still needed to build our pedagogic evidence base about the different aspects of these tools in the context of medical/health education. If effectively deployed, wikis, blogs and podcasts could offer a way to enhance students', clinicians' and patients' learning experiences, and deepen levels of learners' engagement and collaboration within digital learning environments. Therefore, research should be conducted to determine the best ways to integrate these tools into existing e-Learning programmes for students, health professionals and patients, taking into account the different, but also overlapping, needs of these three audience classes and the opportunities of virtual collaboration between them. Of particular importance is research into novel integrative applications, to serve as the "glue" to bind the different forms of Web-based collaborationware synergistically in order to provide a coherent wholesome learning experience.

Open NASA Earth Exchange (OpenNEX): Strategies for enabling cross organization collaboration in the earth sciences

NASA Astrophysics Data System (ADS)

Michaelis, A.; Ganguly, S.; Nemani, R. R.; Votava, P.; Wang, W.; Lee, T. J.; Dungan, J. L.

2014-12-01

Sharing community-valued codes, intermediary datasets and results from individual efforts with others that are not in a direct funded collaboration can be a challenge. Cross organization collaboration is often impeded due to infrastructure security constraints, rigid financial controls, bureaucracy, and workforce nationalities, etc., which can force groups to work in a segmented fashion and/or through awkward and suboptimal web services. We show how a focused community may come together, share modeling and analysis codes, computing configurations, scientific results, knowledge and expertise on a public cloud platform; diverse groups of researchers working together at "arms length". Through the OpenNEX experimental workshop, users can view short technical "how-to" videos and explore encapsulated working environment. Workshop participants can easily instantiate Amazon Machine Images (AMI) or launch full cluster and data processing configurations within minutes. Enabling users to instantiate computing environments from configuration templates on large public cloud infrastructures, such as Amazon Web Services, may provide a mechanism for groups to easily use each others work and collaborate indirectly. Moreover, using the public cloud for this workshop allowed a single group to host a large read only data archive, making datasets of interest to the community widely available on the public cloud, enabling other groups to directly connect to the data and reduce the costs of the collaborative work by freeing other individual groups from redundantly retrieving, integrating or financing the storage of the datasets of interest.

Issues and Experiences in Logistics Collaboration

NASA Astrophysics Data System (ADS)

Lehoux, Nadia; Audy, Jean-François; D‘Amours, Sophie; Rönnqvist, Mikael

Collaborative logistics is becoming more important in today’s industry. This is driven by increased environmental concerns, improved efficiency through collaborative planning supporting resources sharing and new business models implementation. This paper explores collaborative logistics and reports on business applications within the forest products industry in Sweden and Canada. It first describes current opportunities in collaborative planning. It then discusses issues related to building the coalition as well as sharing resources and benefits. Three business cases are described and used to support the discussion around these main issues. Finally, different challenges are detailed, opening new paths for researchers in the field.

Near-source air quality assessment: challenges and collaboration

EPA Science Inventory

This presentation is to give a general overview of near-source air pollution concerns and recent EPA projects (near-road, near-rail, near-port), as well as explaining how these projects were implemented through collaboration internally and externally.

Collaborators | Office of Cancer Genomics

Cancer.gov

The TARGET initiative has been jointly managed within the National Cancer Institute (NCI) by the Office of Cancer Genomics (OCG)Opens in a New Tab and the Cancer Therapy Evaluation Program (CTEP)Opens in a New Tab.

Biological knowledge bases using Wikis: combining the flexibility of Wikis with the structure of databases.

PubMed

Brohée, Sylvain; Barriot, Roland; Moreau, Yves

2010-09-01

In recent years, the number of knowledge bases developed using Wiki technology has exploded. Unfortunately, next to their numerous advantages, classical Wikis present a critical limitation: the invaluable knowledge they gather is represented as free text, which hinders their computational exploitation. This is in sharp contrast with the current practice for biological databases where the data is made available in a structured way. Here, we present WikiOpener an extension for the classical MediaWiki engine that augments Wiki pages by allowing on-the-fly querying and formatting resources external to the Wiki. Those resources may provide data extracted from databases or DAS tracks, or even results returned by local or remote bioinformatics analysis tools. This also implies that structured data can be edited via dedicated forms. Hence, this generic resource combines the structure of biological databases with the flexibility of collaborative Wikis. The source code and its documentation are freely available on the MediaWiki website: http://www.mediawiki.org/wiki/Extension:WikiOpener.

First Universities Allied for Essential Medicines (UAEM) Neglected Diseases and Innovation Symposium

PubMed Central

Musselwhite, Laura W.; Maciag, Karolina; Lankowski, Alex; Gretes, Michael C.; Wellems, Thomas E.; Tavera, Gloria; Goulding, Rebecca E.; Guillen, Ethan

2012-01-01

Universities Allied for Essential Medicines organized its first Neglected Diseases and Innovation Symposium to address expanding roles of public sector research institutions in innovation in research and development of biomedical technologies for treatment of diseases, particularly neglected tropical diseases. Universities and other public research institutions are increasingly integrated into the pharmaceutical innovation system. Academic entities now routinely undertake robust high-throughput screening and medicinal chemistry research programs to identify lead compounds for small molecule drugs and novel drug targets. Furthermore, product development partnerships are emerging between academic institutions, non-profit entities, and biotechnology and pharmaceutical companies to create diagnostics, therapies, and vaccines for diseases of the poor. With not for profit mission statements, open access publishing standards, open source platforms for data sharing and collaboration, and a shift in focus to more translational research, universities and other public research institutions are well-placed to accelerate development of medical technologies, particularly for neglected tropical diseases. PMID:22232453

Development of an Assay for the Detection of PrPres in Blood and Urine Based on PMCA Assay and ELISA Methods

DTIC Science & Technology

2006-09-01

conducted any work with Biotraces in this last period and no funding was drawn from the grant. The collaboration is still open but the work was put...on hold until a better and more sensitive assay platform is developed and fully tested by Biotraces . The company is expected to open a laboratory...at the University of Maryland at the Baltimore campus. When this happens we will be able to establish a more efficient collaboration with Biotraces

GeneLab: NASA's Open Access, Collaborative Platform for Systems Biology and Space Medicine

NASA Technical Reports Server (NTRS)

Berrios, Daniel C.; Thompson, Terri G.; Fogle, Homer W.; Rask, Jon C.; Coughlan, Joseph C.

2015-01-01

NASA is investing in GeneLab1 (http:genelab.nasa.gov), a multi-year effort to maximize utilization of the limited resources to conduct biological and medical research in space, principally aboard the International Space Station (ISS). High-throughput genomic, transcriptomic, proteomic or other omics analyses from experiments conducted on the ISS will be stored in the GeneLab Data Systems (GLDS), an open-science information system that will also include a biocomputation platform with collaborative science capabilities, to enable the discovery and validation of molecular networks.

Initial steps towards a production platform for DNA sequence analysis on the grid.

PubMed

Luyf, Angela C M; van Schaik, Barbera D C; de Vries, Michel; Baas, Frank; van Kampen, Antoine H C; Olabarriaga, Silvia D

2010-12-14

Bioinformatics is confronted with a new data explosion due to the availability of high throughput DNA sequencers. Data storage and analysis becomes a problem on local servers, and therefore it is needed to switch to other IT infrastructures. Grid and workflow technology can help to handle the data more efficiently, as well as facilitate collaborations. However, interfaces to grids are often unfriendly to novice users. In this study we reused a platform that was developed in the VL-e project for the analysis of medical images. Data transfer, workflow execution and job monitoring are operated from one graphical interface. We developed workflows for two sequence alignment tools (BLAST and BLAT) as a proof of concept. The analysis time was significantly reduced. All workflows and executables are available for the members of the Dutch Life Science Grid and the VL-e Medical virtual organizations All components are open source and can be transported to other grid infrastructures. The availability of in-house expertise and tools facilitates the usage of grid resources by new users. Our first results indicate that this is a practical, powerful and scalable solution to address the capacity and collaboration issues raised by the deployment of next generation sequencers. We currently adopt this methodology on a daily basis for DNA sequencing and other applications. More information and source code is available via http://www.bioinformaticslaboratory.nl/

An overview of the challenges in designing, integrating, and delivering BARD: a public chemical biology resource and query portal across multiple organizations, locations, and disciplines

PubMed Central

de Souza, Andrea; Bittker, Joshua; Lahr, David; Brudz, Steve; Chatwin, Simon; Oprea, Tudor I.; Waller, Anna; Yang, Jeremy; Southall, Noel; Guha, Rajarshi; Schurer, Stephan; Vempati, Uma; Southern, Mark R.; Dawson, Eric S.; Clemons, Paul A.; Chung, Thomas D.Y.

2015-01-01

Recent industry-academic partnerships involve collaboration across disciplines, locations, and organizations using publicly funded “open-access” and proprietary commercial data sources. These require effective integration of chemical and biological information from diverse data sources, presenting key informatics, personnel, and organizational challenges. BARD (BioAssay Research Database) was conceived to address these challenges and to serve as a community-wide resource and intuitive web portal for public-sector chemical biology data. Its initial focus is to enable scientists to more effectively use the NIH Roadmap Molecular Libraries Program (MLP) data generated from 3-year pilot and 6-year production phases of the Molecular Libraries Probe Production Centers Network (MLPCN), currently in its final year. BARD evolves the current data standards through structured assay and result annotations that leverage the BioAssay Ontology (BAO) and other industry-standard ontologies, and a core hierarchy of assay definition terms and data standards defined specifically for small-molecule assay data. We have initially focused on migrating the highest-value MLP data into BARD and bringing it up to this new standard. We review the technical and organizational challenges overcome by the inter-disciplinary BARD team, veterans of public and private sector data-integration projects, collaborating to describe (functional specifications), design (technical specifications), and implement this next-generation software solution. PMID:24441647

An open source framework for tracking and state estimation ('Stone Soup')

NASA Astrophysics Data System (ADS)

Thomas, Paul A.; Barr, Jordi; Balaji, Bhashyam; White, Kruger

2017-05-01

The ability to detect and unambiguously follow all moving entities in a state-space is important in multiple domains both in defence (e.g. air surveillance, maritime situational awareness, ground moving target indication) and the civil sphere (e.g. astronomy, biology, epidemiology, dispersion modelling). However, tracking and state estimation researchers and practitioners have difficulties recreating state-of-the-art algorithms in order to benchmark their own work. Furthermore, system developers need to assess which algorithms meet operational requirements objectively and exhaustively rather than intuitively or driven by personal favourites. We have therefore commenced the development of a collaborative initiative to create an open source framework for production, demonstration and evaluation of Tracking and State Estimation algorithms. The initiative will develop a (MIT-licensed) software platform for researchers and practitioners to test, verify and benchmark a variety of multi-sensor and multi-object state estimation algorithms. The initiative is supported by four defence laboratories, who will contribute to the development effort for the framework. The tracking and state estimation community will derive significant benefits from this work, including: access to repositories of verified and validated tracking and state estimation algorithms, a framework for the evaluation of multiple algorithms, standardisation of interfaces and access to challenging data sets. Keywords: Tracking,

Open data for water-related operational services, the SWITCH-ON approach

NASA Astrophysics Data System (ADS)

Mazzoli, Paolo; Bagli, Stefano; Valerio, Luzzi; Broccoli, Davide; Piccinini, Francesca

2017-04-01

Recently, a collaborative project started called SWITCH-ON (EU FP7 project No 603587) coordinated by SMHI (http://water-switch-on.eu/) as part of the contemporary European movement imposed by the INSPIRE directive and the Open Data Strategy. Among It's R&D activities GECOsistema develops and expands inside SWITCH-ON a set of online services to tackle major water related issues, from reservoir and irrigation supply, to hydrological change adaptation and hydropower potential mapping. Here we present major releases of APRIL, HyCAW and High-resolution European HydroPower Atlas; all of which make intense use of open data. APRIL is a tool for seasonal run-off forecasts, that takes advantage of open datasets or low-cost data and performs forecasts through calibrated machine learning algorithms. HyCAW is a wizard that supports the assessment of adaptation options to cope with change in the temporal distribution of water availability as well as in the total water quantity. EU HPA provides all relevant information necessary to appraise the feasibility of a micro-hydropower plant at a specific site, taking into account hydrological as well as technical and economic factors. All the tools share a common vision of the project to address water concerns and currently untapped potential of open data for improved water management across the EU. Users are guided through a Web GIS interface, created using open source Web Mapping Applications, Open-Layers and Map Server, to explore available hydrological information in the area of interest, plot available data, perform analysis, and get reports and statistics.

The Emergence of Open-Source Software in China

ERIC Educational Resources Information Center

Pan, Guohua; Bonk, Curtis J.

2007-01-01

The open-source software movement is gaining increasing momentum in China. Of the limited numbers of open-source software in China, "Red Flag Linux" stands out most strikingly, commanding 30 percent share of Chinese software market. Unlike the spontaneity of open-source movement in North America, open-source software development in…