Perceptions of Open Source versus Commercial Software: Is Higher Education Still on the Fence?

ERIC Educational Resources Information Center

van Rooij, Shahron Williams

2007-01-01

This exploratory study investigated the perceptions of technology and academic decision-makers about open source benefits and risks versus commercial software applications. The study also explored reactions to a concept for outsourcing campus-wide deployment and maintenance of open source. Data collected from telephone interviews were analyzed,…

Open Source for Knowledge and Learning Management: Strategies beyond Tools

ERIC Educational Resources Information Center

Lytras, Miltiadis, Ed.; Naeve, Ambjorn, Ed.

2007-01-01

In the last years, knowledge and learning management have made a significant impact on the IT research community. "Open Source for Knowledge and Learning Management: Strategies Beyond Tools" presents learning and knowledge management from a point of view where the basic tools and applications are provided by open source technologies.…

An Embedded Systems Course for Engineering Students Using Open-Source Platforms in Wireless Scenarios

ERIC Educational Resources Information Center

Rodriguez-Sanchez, M. C.; Torrado-Carvajal, Angel; Vaquero, Joaquin; Borromeo, Susana; Hernandez-Tamames, Juan A.

2016-01-01

This paper presents a case study analyzing the advantages and disadvantages of using project-based learning (PBL) combined with collaborative learning (CL) and industry best practices, integrated with information communication technologies, open-source software, and open-source hardware tools, in a specialized microcontroller and embedded systems…

Technology collaboration by means of an open source government

NASA Astrophysics Data System (ADS)

Berardi, Steven M.

2009-05-01

The idea of open source software originally began in the early 1980s, but it never gained widespread support until recently, largely due to the explosive growth of the Internet. Only the Internet has made this kind of concept possible, bringing together millions of software developers from around the world to pool their knowledge. The tremendous success of open source software has prompted many corporations to adopt the culture of open source and thus share information they previously held secret. The government, and specifically the Department of Defense (DoD), could also benefit from adopting an open source culture. In acquiring satellite systems, the DoD often builds walls between program offices, but installing doors between programs can promote collaboration and information sharing. This paper addresses the challenges and consequences of adopting an open source culture to facilitate technology collaboration for DoD space acquisitions. DISCLAIMER: The views presented here are the views of the author, and do not represent the views of the United States Government, United States Air Force, or the Missile Defense Agency.

Biosecurity and Open-Source Biology: The Promise and Peril of Distributed Synthetic Biological Technologies.

PubMed

Evans, Nicholas G; Selgelid, Michael J

2015-08-01

In this article, we raise ethical concerns about the potential misuse of open-source biology (OSB): biological research and development that progresses through an organisational model of radical openness, deskilling, and innovation. We compare this organisational structure to that of the open-source software model, and detail salient ethical implications of this model. We demonstrate that OSB, in virtue of its commitment to openness, may be resistant to governance attempts.

4onse: four times open & non-conventional technology for sensing the environment

NASA Astrophysics Data System (ADS)

Cannata, Massimiliano; Ratnayake, Rangageewa; Antonovic, Milan; Strigaro, Daniele; Cardoso, Mirko; Hoffmann, Marcus

2017-04-01

The availability of complete, quality and dense monitoring hydro-meteorological data is essential to address a number of practical issues including, but not limited to, flood-water and urban drainage management, climate change impact assessment, early warning and risk management, now-casting and weather predictions. Thanks to the recent technological advances such as Internet Of Things, Big Data and Ubiquitous Internet, non-conventional monitoring systems based on open technologies and low cost sensors may represent a great opportunity either as a complement of authoritative monitoring network or as a vital source of information wherever existing monitoring networks are in decline or completely missing. Nevertheless, scientific literature on such a kind of open and non-conventional monitoring systems is still limited and often relates to prototype engineering and testing in rather limited case studies. For this reason the 4onse project aims at integrating existing open technologies in the field of Free & Open Source Software, Open Hardware, Open Data, and Open Standards and evaluate this kind of system in a real case (about 30 stations) for a medium period of 2 years to better scientifically understand strengths, criticalities and applicabilities in terms of data quality; system durability; management costs; performances; sustainability. The ultimate objective is to contribute in non-conventional monitoring systems adoption based on four open technologies.

General Mission Analysis Tool (GMAT): Mission, Vision, and Business Case

NASA Technical Reports Server (NTRS)

Hughes, Steven P.

2007-01-01

The Goal of the GMAT project is to develop new space trajectory optimization and mission design technology by working inclusively with ordinary people, universities businesses and other government organizations; and to share that technology in an open and unhindered way. GMAT's a free and open source software system; free for anyone to use in development of new mission concepts or to improve current missions, freely available in source code form for enhancement or future technology development.

Key Considerations of Community, Scalability, Supportability, Security, and Functionality in Selecting Open-Source Software in California Universities as Perceived by Technology Leaders

ERIC Educational Resources Information Center

Britton, Todd Alan

2014-01-01

Purpose: The purpose of this study was to examine the key considerations of community, scalability, supportability, security, and functionality for selecting open-source software in California universities as perceived by technology leaders. Methods: After a review of the cogent literature, the key conceptual framework categories were identified…

Open Source Initiative Powers Real-Time Data Streams

NASA Technical Reports Server (NTRS)

2014-01-01

Under an SBIR contract with Dryden Flight Research Center, Creare Inc. developed a data collection tool called the Ring Buffered Network Bus. The technology has now been released under an open source license and is hosted by the Open Source DataTurbine Initiative. DataTurbine allows anyone to stream live data from sensors, labs, cameras, ocean buoys, cell phones, and more.

Looking toward the Future: A Case Study of Open Source Software in the Humanities

ERIC Educational Resources Information Center

Quamen, Harvey

2006-01-01

In this article Harvey Quamen examines how the philosophy of open source software might be of particular benefit to humanities scholars in the near future--particularly for academic journals with limited financial resources. To this end he provides a case study in which he describes his use of open source technology (MySQL database software and…

Unmanned Ground Vehicle Communications Relays: Lessons Learned

DTIC Science & Technology

2014-04-01

technology, specifically an open-source VPN package, OpenVPN . This technology provides a wrapper around the network messages, providing a plug-and-play...performed in OpenVPN :  Set the Maximum Transmission Unit (MTU) to 1600. This is because each VPN endpoint has an MTU of 1500 (the default for Ethernet

Using Open Source Software in Visual Simulation Development

DTIC Science & Technology

2005-09-01

increased the use of the technology in training activities. Using open source/free software tools in the process can expand these possibilities...resulting in even greater cost reduction and allowing the flexibility needed in a training environment. This thesis presents a configuration and architecture...to be used when developing training visual simulations using both personal computers and open source tools. Aspects of the requirements needed in a

Research on OpenStack of open source cloud computing in colleges and universities’ computer room

NASA Astrophysics Data System (ADS)

Wang, Lei; Zhang, Dandan

2017-06-01

In recent years, the cloud computing technology has a rapid development, especially open source cloud computing. Open source cloud computing has attracted a large number of user groups by the advantages of open source and low cost, have now become a large-scale promotion and application. In this paper, firstly we briefly introduced the main functions and architecture of the open source cloud computing OpenStack tools, and then discussed deeply the core problems of computer labs in colleges and universities. Combining with this research, it is not that the specific application and deployment of university computer rooms with OpenStack tool. The experimental results show that the application of OpenStack tool can efficiently and conveniently deploy cloud of university computer room, and its performance is stable and the functional value is good.

Exploring the Role of Value Networks for Software Innovation

NASA Astrophysics Data System (ADS)

Morgan, Lorraine; Conboy, Kieran

This paper describes a research-in-progress that aims to explore the applicability and implications of open innovation practices in two firms - one that employs agile development methods and another that utilizes open source software. The open innovation paradigm has a lot in common with open source and agile development methodologies. A particular strength of agile approaches is that they move away from 'introverted' development, involving only the development personnel, and intimately involves the customer in all areas of software creation, supposedly leading to the development of a more innovative and hence more valuable information system. Open source software (OSS) development also shares two key elements of the open innovation model, namely the collaborative development of the technology and shared rights to the use of the technology. However, one shortfall with agile development in particular is the narrow focus on a single customer representative. In response to this, we argue that current thinking regarding innovation needs to be extended to include multiple stakeholders both across and outside the organization. Additionally, for firms utilizing open source, it has been found that their position in a network of potential complementors determines the amount of superior value they create for their customers. Thus, this paper aims to get a better understanding of the applicability and implications of open innovation practices in firms that employ open source and agile development methodologies. In particular, a conceptual framework is derived for further testing.

Open Source Cloud-Based Technologies for Bim

NASA Astrophysics Data System (ADS)

Logothetis, S.; Karachaliou, E.; Valari, E.; Stylianidis, E.

2018-05-01

This paper presents a Cloud-based open source system for storing and processing data from a 3D survey approach. More specifically, we provide an online service for viewing, storing and analysing BIM. Cloud technologies were used to develop a web interface as a BIM data centre, which can handle large BIM data using a server. The server can be accessed by many users through various electronic devices anytime and anywhere so they can view online 3D models using browsers. Nowadays, the Cloud computing is engaged progressively in facilitating BIM-based collaboration between the multiple stakeholders and disciplinary groups for complicated Architectural, Engineering and Construction (AEC) projects. Besides, the development of Open Source Software (OSS) has been rapidly growing and their use tends to be united. Although BIM and Cloud technologies are extensively known and used, there is a lack of integrated open source Cloud-based platforms able to support all stages of BIM processes. The present research aims to create an open source Cloud-based BIM system that is able to handle geospatial data. In this effort, only open source tools will be used; from the starting point of creating the 3D model with FreeCAD to its online presentation through BIMserver. Python plug-ins will be developed to link the two software which will be distributed and freely available to a large community of professional for their use. The research work will be completed by benchmarking four Cloud-based BIM systems: Autodesk BIM 360, BIMserver, Graphisoft BIMcloud and Onuma System, which present remarkable results.

Open source system OpenVPN in a function of Virtual Private Network

NASA Astrophysics Data System (ADS)

Skendzic, A.; Kovacic, B.

2017-05-01

Using of Virtual Private Networks (VPN) can establish high security level in network communication. VPN technology enables high security networking using distributed or public network infrastructure. VPN uses different security and managing rules inside networks. It can be set up using different communication channels like Internet or separate ISP communication infrastructure. VPN private network makes security communication channel over public network between two endpoints (computers). OpenVPN is an open source software product under GNU General Public License (GPL) that can be used to establish VPN communication between two computers inside business local network over public communication infrastructure. It uses special security protocols and 256-bit Encryption and it is capable of traversing network address translators (NATs) and firewalls. It allows computers to authenticate each other using a pre-shared secret key, certificates or username and password. This work gives review of VPN technology with a special accent on OpenVPN. This paper will also give comparison and financial benefits of using open source VPN software in business environment.

Openness, Web 2.0 Technology, and Open Science

ERIC Educational Resources Information Center

Peters, Michael A.

2010-01-01

Open science is a term that is being used in the literature to designate a form of science based on open source models or that utilizes principles of open access, open archiving and open publishing to promote scientific communication. Open science increasingly also refers to open governance and more democratized engagement and control of science…

Open source tools for large-scale neuroscience.

PubMed

Freeman, Jeremy

2015-06-01

New technologies for monitoring and manipulating the nervous system promise exciting biology but pose challenges for analysis and computation. Solutions can be found in the form of modern approaches to distributed computing, machine learning, and interactive visualization. But embracing these new technologies will require a cultural shift: away from independent efforts and proprietary methods and toward an open source and collaborative neuroscience. Copyright © 2015 The Author. Published by Elsevier Ltd.. All rights reserved.

Utilization of Open Source Technology to Create Cost-Effective Microscope Camera Systems for Teaching.

PubMed

Konduru, Anil Reddy; Yelikar, Balasaheb R; Sathyashree, K V; Kumar, Ankur

2018-01-01

Open source technologies and mobile innovations have radically changed the way people interact with technology. These innovations and advancements have been used across various disciplines and already have a significant impact. Microscopy, with focus on visually appealing contrasting colors for better appreciation of morphology, forms the core of the disciplines such as Pathology, microbiology, and anatomy. Here, learning happens with the aid of multi-head microscopes and digital camera systems for teaching larger groups and in organizing interactive sessions for students or faculty of other departments. The cost of the original equipment manufacturer (OEM) camera systems in bringing this useful technology at all the locations is a limiting factor. To avoid this, we have used the low-cost technologies like Raspberry Pi, Mobile high definition link and 3D printing for adapters to create portable camera systems. Adopting these open source technologies enabled us to convert any binocular or trinocular microscope be connected to a projector or HD television at a fraction of the cost of the OEM camera systems with comparable quality. These systems, in addition to being cost-effective, have also provided the added advantage of portability, thus providing the much-needed flexibility at various teaching locations.

Openly Published Environmental Sensing (OPEnS) | Advancing Open-Source Research, Instrumentation, and Dissemination

NASA Astrophysics Data System (ADS)

Udell, C.; Selker, J. S.

2017-12-01

The increasing availability and functionality of Open-Source software and hardware along with 3D printing, low-cost electronics, and proliferation of open-access resources for learning rapid prototyping are contributing to fundamental transformations and new technologies in environmental sensing. These tools invite reevaluation of time-tested methodologies and devices toward more efficient, reusable, and inexpensive alternatives. Building upon Open-Source design facilitates community engagement and invites a Do-It-Together (DIT) collaborative framework for research where solutions to complex problems may be crowd-sourced. However, barriers persist that prevent researchers from taking advantage of the capabilities afforded by open-source software, hardware, and rapid prototyping. Some of these include: requisite technical skillsets, knowledge of equipment capabilities, identifying inexpensive sources for materials, money, space, and time. A university MAKER space staffed by engineering students to assist researchers is one proposed solution to overcome many of these obstacles. This presentation investigates the unique capabilities the USDA-funded Openly Published Environmental Sensing (OPEnS) Lab affords researchers, within Oregon State and internationally, and the unique functions these types of initiatives support at the intersection of MAKER spaces, Open-Source academic research, and open-access dissemination.

Mobile Technologies and Augmented Reality in Open Education

ERIC Educational Resources Information Center

Kurubacak, Gulsun, Ed.; Altinpulluk, Hakan, Ed.

2017-01-01

Novel trends and innovations have enhanced contemporary educational environments. When applied properly, these computing advances can create enriched learning opportunities for students. "Mobile Technologies and Augmented Reality in Open Education" is a pivotal reference source for the latest academic research on the integration of…

Evaluation of Teacher Perceptions and Potential of OpenOffice in a K-12 School District

ERIC Educational Resources Information Center

Vajda, James; Abbitt, Jason T.

2011-01-01

Through this mixed-method evaluation study the authors investigated a pilot implementation of an open-source productivity suite for teachers in a K-12 public school district. The authors evaluated OpenOffice version 3.0 using measures identified by the technology acceptance model as predictors of acceptance and use of technology systems. During a…

A Clinician-Centered Evaluation of the Usability of AHLTA and Automated Clinical Practice Guidelines at TAMC

DTIC Science & Technology

2011-03-31

evidence based medicine into clinical practice. It will decrease costs and enable multiple stakeholders to work in an open content/source environment to exchange clinical content, develop and test technology and explore processes in applied CDS. Design: Comparative study between the KMR infrastructure and capabilities developed as an open source, vendor agnostic solution for aCPG execution within AHLTA and the current DoD/MHS standard evaluating: H1: An open source, open standard KMR and Clinical Decision Support Engine can enable organizations to share domain

Getting Open Source Right for Big Data Analytics: Software Sharing, Governance, Collaboration and Most of All, Fun!

NASA Astrophysics Data System (ADS)

Mattmann, C. A.

2013-12-01

A wave of open source big data analytic infrastructure is currently shaping government, private sector, and academia. Projects are consuming, adapting, and contributing back to various ecosystems of software e.g., the Apache Hadoop project and its ecosystem of related efforts including Hive, HBase, Pig, Oozie, Ambari, Knox, Tez and Yarn, to name a few; the Berkeley AMPLab stack which includes Spark, Shark, Mesos, Tachyon, BlinkDB, MLBase, and other emerging efforts; MapR and its related stack of technologies, offerings from commercial companies building products around these tools e.g., Hortonworks Data Platform (HDP), Cloudera's CDH project, etc. Though the technologies all offer different capabilities including low latency support/in-memory, versus record oriented file I/O, high availability, support for the Map Reduce programming paradigm or other dataflow/workflow constructs, there is a common thread that binds these products - they are all released under an open source license e.g., Apache2, MIT, BSD, GPL/LGPL, etc.; all thrive in various ecosystems, such as Apache, or Berkeley AMPLab; all are developed collaboratively, and all technologies provide plug in architecture models and methodologies for allowing others to contribute, and participate via various community models. This talk will cover the open source aspects and governance aspects of the aforementioned Big Data ecosystems and point out the differences, subtleties, and implications of those differences. The discussion will be by example, using several national deployments and Big Data initiatives stemming from the Administration including DARPA's XDATA program; NASA's CMAC program; NSF's EarthCube and geosciences BigData projects. Lessons learned from these efforts in terms of the open source aspects of these technologies will help guide the AGU community in their use, deployment and understanding.

Lowering the barrier to a decentralized NHIN using the open healthcare framework.

PubMed

Smith, Eishay; Kaufman, James H

2006-01-01

In this paper, we discuss two important elements to lowering the barrier to creation of a National Health Information Network. The first element is the adoption of standards that will enable interoperability while guarantee open interfaces (and preventing vendor lock-in). The second element is the role of open source. While adoption of open standards by large EMR vendors is critically important to enterprise healthcare providers and payors, the availability of inexpensive (or free) standardized Healthcare Information Technology for small physician practices is critical. By analogy to the emergence of the World Wide Web, a framework for creating inexpensive and open source applications for physicians will be as important to realizing a National Health Information Network as availability of free browser technology was to the growth of the internet.

Inquiry into Turkey's Educational Technology, Governance, Situational Educational Policy: An Analysis

ERIC Educational Resources Information Center

Tolu, Hüseyin

2018-01-01

Investigating the sociology of educational technology can be approached through a series of deliberations based on the interaction between Free/Libre Open Source Software (FLOSS) and Proprietary Close Source Software (PCSS). This article consults public policy discourses of the Fatih project, which is the current educational technology project in…

Acquiring Data by Mining the Past: Pairing Communities with Environmental Monitoring Methods through Open Online Collaborative Replication

NASA Astrophysics Data System (ADS)

Lippincott, M.; Lewis, E. S.; Gehrke, G. E.; Wise, A.; Pyle, S.; Sinatra, V.; Bland, G.; Bydlowski, D.; Henry, A.; Gilberts, P. A.

2016-12-01

Community groups are interested in low-cost sensors to monitor their environment. However, many new commercial sensors are unknown devices without peer-reviewed evaluations of data quality or pathways to regulatory acceptance, and the time to achieve these outcomes may be beyond a community's patience and attention. Rather than developing a device from scratch or validating a new commercial product, a workflow is presented whereby existing technologies, especially those that are out of patent, are replicated through open online collaboration between communities affected by environmental pollution, volunteers, academic institutions, and existing open hardware and open source software projects. Technology case studies will be presented, focusing primarily on a passive PM monitor based on the UNC Passive Monitor. Stages of the project will be detailed moving from identifying community needs, reviewing existing technology, partnership development, technology replication, IP review and licensing, data quality assurance (in process), and field evaluation with community partners (in process), with special attention to partnership development and technology review. We have leveraged open hardware and open source software to lower the cost and access barriers of existing technologies for PM10-2.5 and other atmospheric measures that have already been validated through peer review. Existing validation of and regulatory familiarity with a technology enables a rapid pathway towards collecting data, shortening the time it takes for communities to leverage data in environmental management decisions. Online collaboration requires rigorous documentation that aids in spreading research methods and promoting deep engagement by interested community researchers outside academia. At the same time, careful choice of technology and the use of small-scale fabrication through laser cutting, 3D printing, and open, shared repositories of plans and software enables educational engagement that broadens a project's reach.

Social network of PESCA (Open Source Platform for eHealth).

PubMed

Sanchez, Carlos L; Romero-Cuevas, Miguel; Lopez, Diego M; Lorca, Julio; Alcazar, Francisco J; Ruiz, Sergio; Mercado, Carmen; Garcia-Fortea, Pedro

2008-01-01

Information and Communication Technologies (ICTs) are revolutionizing how healthcare systems deliver top-quality care to citizens. In this way, Open Source Software (OSS) has demonstrated to be an important strategy to spread ICTs use. Several human and technological barriers in adopting OSS for healthcare have been identified. Human barriers include user acceptance, limited support, technical skillfulness, awareness, resistance to change, etc., while Technological barriers embrace need for open standards, heterogeneous OSS developed without normalization and metrics, lack of initiatives to evaluate existing health OSS and need for quality control and functional validation. The goals of PESCA project are to create a platform of interoperable modules to evaluate, classify and validate good practices in health OSS. Furthermore, a normalization platform will provide interoperable solutions in the fields of healthcare services, health surveillance, health literature, and health education, knowledge and research. Within the platform, the first goal to achieve is the setup of the collaborative work infrastructure. The platform is being organized as a Social Network which works to evaluate five scopes of every existing open source tools for eHealth: Open Source Software, Quality, Pedagogical, Security and privacy and Internationalization/I18N. In the meantime, the knowledge collected from the networking will configure a Good Practice Repository on eHealth promoting the effective use of ICT on behalf of the citizen's health.

Use of Open Standards and Technologies at the Lunar Mapping and Modeling Project

NASA Astrophysics Data System (ADS)

Law, E.; Malhotra, S.; Bui, B.; Chang, G.; Goodale, C. E.; Ramirez, P.; Kim, R. M.; Sadaqathulla, S.; Rodriguez, L.

2011-12-01

The Lunar Mapping and Modeling Project (LMMP), led by the Marshall Space Flight center (MSFC), is tasked by NASA. The project is responsible for the development of an information system to support lunar exploration activities. It provides lunar explorers a set of tools and lunar map and model products that are predominantly derived from present lunar missions (e.g., the Lunar Reconnaissance Orbiter (LRO)) and from historical missions (e.g., Apollo). At Jet Propulsion Laboratory (JPL), we have built the LMMP interoperable geospatial information system's underlying infrastructure and a single point of entry - the LMMP Portal by employing a number of open standards and technologies. The Portal exposes a set of services to users to allow search, visualization, subset, and download of lunar data managed by the system. Users also have access to a set of tools that visualize, analyze and annotate the data. The infrastructure and Portal are based on web service oriented architecture. We designed the system to support solar system bodies in general including asteroids, earth and planets. We employed a combination of custom software, commercial and open-source components, off-the-shelf hardware and pay-by-use cloud computing services. The use of open standards and web service interfaces facilitate platform and application independent access to the services and data, offering for instances, iPad and Android mobile applications and large screen multi-touch with 3-D terrain viewing functions, for a rich browsing and analysis experience from a variety of platforms. The web services made use of open standards including: Representational State Transfer (REST); and Open Geospatial Consortium (OGC)'s Web Map Service (WMS), Web Coverage Service (WCS), Web Feature Service (WFS). Its data management services have been built on top of a set of open technologies including: Object Oriented Data Technology (OODT) - open source data catalog, archive, file management, data grid framework; openSSO - open source access management and federation platform; solr - open source enterprise search platform; redmine - open source project collaboration and management framework; GDAL - open source geospatial data abstraction library; and others. Its data products are compliant with Federal Geographic Data Committee (FGDC) metadata standard. This standardization allows users to access the data products via custom written applications or off-the-shelf applications such as GoogleEarth. We will demonstrate this ready-to-use system for data discovery and visualization by walking through the data services provided through the portal such as browse, search, and other tools. We will further demonstrate image viewing and layering of lunar map images from the Internet, via mobile devices such as Apple's iPad.

Open Source, Crowd Source: Harnessing the Power of the People behind Our Libraries

ERIC Educational Resources Information Center

Trainor, Cindi

2009-01-01

Purpose: The purpose of this paper is to provide an insight into the use of Web 2.0 and Library 2.0 technologies so that librarians can combine open source software with user-generated content to create a richer discovery experience for their users. Design/methodology/approach: Following a description of the current state of integrated library…

Open source and DIY hardware for DNA nanotechnology labs.

PubMed

Damase, Tulsi R; Stephens, Daniel; Spencer, Adam; Allen, Peter B

A set of instruments and specialized equipment is necessary to equip a laboratory to work with DNA. Reducing the barrier to entry for DNA manipulation should enable and encourage new labs to enter the field. We present three examples of open source/DIY technology with significantly reduced costs relative to commercial equipment. This includes a gel scanner, a horizontal PAGE gel mold, and a homogenizer for generating DNA-coated particles. The overall cost savings obtained by using open source/DIY equipment was between 50 and 90%.

Online Textbooks Deliver Timely, Real-World Content

ERIC Educational Resources Information Center

Seidel, Kim

2009-01-01

Faced with the challenge of keeping up with the rapidly changing field of information systems, author and teacher John Gallaugher opted to write an open source textbook with a new online company, Flat World Knowledge (FWK). Gallaugher's open source textbook, "Information Systems: A Manager's Guide to Harnessing Technology", has an expected…

An Investigation of an Open-Source Software Development Environment in a Software Engineering Graduate Course

ERIC Educational Resources Information Center

Ge, Xun; Huang, Kun; Dong, Yifei

2010-01-01

A semester-long ethnography study was carried out to investigate project-based learning in a graduate software engineering course through the implementation of an Open-Source Software Development (OSSD) learning environment, which featured authentic projects, learning community, cognitive apprenticeship, and technology affordances. The study…

3D Technology Selection for a Virtual Learning Environment by Blending ISO 9126 Standard and AHP

ERIC Educational Resources Information Center

Cetin, Aydin; Guler, Inan

2011-01-01

Web3D presents many opportunities for learners in a virtual world or virtual environment over the web. This is a great opportunity for open-distance education institutions to benefit from web3d technologies to create courses with interactive 3d materials. There are many open source and commercial products offering 3d technologies over the web…

An Open Source Simulation System

NASA Technical Reports Server (NTRS)

Slack, Thomas

2005-01-01

An investigation into the current state of the art of open source real time programming practices. This document includes what technologies are available, how easy is it to obtain, configure, and use them, and some performance measures done on the different systems. A matrix of vendors and their products is included as part of this investigation, but this is not an exhaustive list, and represents only a snapshot of time in a field that is changing rapidly. Specifically, there are three approaches investigated: 1. Completely open source on generic hardware, downloaded from the net. 2. Open source packaged by a vender and provided as free evaluation copy. 3. Proprietary hardware with pre-loaded proprietary source available software provided by the vender as for our evaluation.

Open Source software and social networks: disruptive alternatives for medical imaging.

PubMed

Ratib, Osman; Rosset, Antoine; Heuberger, Joris

2011-05-01

In recent decades several major changes in computer and communication technology have pushed the limits of imaging informatics and PACS beyond the traditional system architecture providing new perspectives and innovative approach to a traditionally conservative medical community. Disruptive technologies such as the world-wide-web, wireless networking, Open Source software and recent emergence of cyber communities and social networks have imposed an accelerated pace and major quantum leaps in the progress of computer and technology infrastructure applicable to medical imaging applications. This paper reviews the impact and potential benefits of two major trends in consumer market software development and how they will influence the future of medical imaging informatics. Open Source software is emerging as an attractive and cost effective alternative to traditional commercial software developments and collaborative social networks provide a new model of communication that is better suited to the needs of the medical community. Evidence shows that successful Open Source software tools have penetrated the medical market and have proven to be more robust and cost effective than their commercial counterparts. Developed by developers that are themselves part of the user community, these tools are usually better adapted to the user's need and are more robust than traditional software programs being developed and tested by a large number of contributing users. This context allows a much faster and more appropriate development and evolution of the software platforms. Similarly, communication technology has opened up to the general public in a way that has changed the social behavior and habits adding a new dimension to the way people communicate and interact with each other. The new paradigms have also slowly penetrated the professional market and ultimately the medical community. Secure social networks allowing groups of people to easily communicate and exchange information is a new model that is particularly suitable for some specific groups of healthcare professional and for physicians. It has also changed the expectations of how patients wish to communicate with their physicians. Emerging disruptive technologies and innovative paradigm such as Open Source software are leading the way to a new generation of information systems that slowly will change the way physicians and healthcare providers as well as patients will interact and communicate in the future. The impact of these new technologies is particularly effective in image communication, PACS and teleradiology. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Developing a GIS for CO2 analysis using lightweight, open source components

NASA Astrophysics Data System (ADS)

Verma, R.; Goodale, C. E.; Hart, A. F.; Kulawik, S. S.; Law, E.; Osterman, G. B.; Braverman, A.; Nguyen, H. M.; Mattmann, C. A.; Crichton, D. J.; Eldering, A.; Castano, R.; Gunson, M. R.

2012-12-01

There are advantages to approaching the realm of geographic information systems (GIS) using lightweight, open source components in place of a more traditional web map service (WMS) solution. Rapid prototyping, schema-less data storage, the flexible interchange of components, and open source community support are just some of the benefits. In our effort to develop an application supporting the geospatial and temporal rendering of remote sensing carbon-dioxide (CO2) data for the CO2 Virtual Science Data Environment project, we have connected heterogeneous open source components together to form a GIS. Utilizing widely popular open source components including the schema-less database MongoDB, Leaflet interactive maps, the HighCharts JavaScript graphing library, and Python Bottle web-services, we have constructed a system for rapidly visualizing CO2 data with reduced up-front development costs. These components can be aggregated together, resulting in a configurable stack capable of replicating features provided by more standard GIS technologies. The approach we have taken is not meant to replace the more established GIS solutions, but to instead offer a rapid way to provide GIS features early in the development of an application and to offer a path towards utilizing more capable GIS technology in the future.

Rapid development of medical imaging tools with open-source libraries.

PubMed

Caban, Jesus J; Joshi, Alark; Nagy, Paul

2007-11-01

Rapid prototyping is an important element in researching new imaging analysis techniques and developing custom medical applications. In the last ten years, the open source community and the number of open source libraries and freely available frameworks for biomedical research have grown significantly. What they offer are now considered standards in medical image analysis, computer-aided diagnosis, and medical visualization. A cursory review of the peer-reviewed literature in imaging informatics (indeed, in almost any information technology-dependent scientific discipline) indicates the current reliance on open source libraries to accelerate development and validation of processes and techniques. In this survey paper, we review and compare a few of the most successful open source libraries and frameworks for medical application development. Our dual intentions are to provide evidence that these approaches already constitute a vital and essential part of medical image analysis, diagnosis, and visualization and to motivate the reader to use open source libraries and software for rapid prototyping of medical applications and tools.

Higher Education Sub-Cultures and Open Source Adoption

ERIC Educational Resources Information Center

van Rooij, Shahron Williams

2011-01-01

Successful adoption of new teaching and learning technologies in higher education requires the consensus of two sub-cultures, namely the technologist sub-culture and the academic sub-culture. This paper examines trends in adoption of open source software (OSS) for teaching and learning by comparing the results of a 2009 survey of 285 Chief…

Modular Object-Oriented Dynamic Learning Environment: What Open Source Has to Offer

ERIC Educational Resources Information Center

Antonenko, Pavlo; Toy, Serkan; Niederhauser, Dale

2004-01-01

Open source online learning environments have emerged and developed over the past 10 years. In this paper we will analyze the underlying philosophy and features of MOODLE based on the theoretical framework developed by Hannafin and Land (2000). Psychological, pedagogical, technological, cultural, and pragmatic foundations comprise the framework…

77 FR 41786 - Sunshine Act Meeting; Open Commission Meeting; Thursday, July 19, 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-16

... latest open source mapping technology to increase transparency across the agency and promote data-driven... FEDERAL COMMUNICATIONS COMMISSION Sunshine Act Meeting; Open Commission Meeting; Thursday, July 19, 2012 July 12, 2012. The Federal Communications Commission will hold an Open Meeting on Thursday, July...

The importance of using open source technologies and common standards for interoperability within eHealth: Perspectives from the Millennium Villages Project

PubMed Central

Borland, Rob; Barasa, Mourice; Iiams-Hauser, Casey; Velez, Olivia; Kaonga, Nadi Nina; Berg, Matt

2013-01-01

The purpose of this paper is to illustrate the importance of using open source technologies and common standards for interoperability when implementing eHealth systems and illustrate this through case studies, where possible. The sources used to inform this paper draw from the implementation and evaluation of the eHealth Program in the context of the Millennium Villages Project (MVP). As the eHealth Team was tasked to deploy an eHealth architecture, the Millennium Villages Global-Network (MVG-Net), across all fourteen of the MVP sites in Sub-Saharan Africa, the team recognized the need for standards and uniformity but also realized that context would be an important factor. Therefore, the team decided to utilize open source solutions. The MVP implementation of MVG-Net provides a model for those looking to implement informatics solutions across disciplines and countries. Furthermore, there are valuable lessons learned that the eHealth community can benefit from. By sharing lessons learned and developing an accessible, open-source eHealth platform, we believe that we can more efficiently and rapidly achieve the health-related and collaborative Millennium Development Goals (MDGs). PMID:22894051

Application of Open Source Software by the Lunar Mapping and Modeling Project

NASA Astrophysics Data System (ADS)

Ramirez, P.; Goodale, C. E.; Bui, B.; Chang, G.; Kim, R. M.; Law, E.; Malhotra, S.; Rodriguez, L.; Sadaqathullah, S.; Mattmann, C. A.; Crichton, D. J.

2011-12-01

The Lunar Mapping and Modeling Project (LMMP), led by the Marshall Space Flight center (MSFC), is responsible for the development of an information system to support lunar exploration, decision analysis, and release of lunar data to the public. The data available through the lunar portal is predominantly derived from present lunar missions (e.g., the Lunar Reconnaissance Orbiter (LRO)) and from historical missions (e.g., Apollo). This project has created a gold source of data, models, and tools for lunar explorers to exercise and incorporate into their activities. At Jet Propulsion Laboratory (JPL), we focused on engineering and building the infrastructure to support cataloging, archiving, accessing, and delivery of lunar data. We decided to use a RESTful service-oriented architecture to enable us to abstract from the underlying technology choices and focus on interfaces to be used internally and externally. This decision allowed us to leverage several open source software components and integrate them by either writing a thin REST service layer or relying on the API they provided; the approach chosen was dependent on the targeted consumer of a given interface. We will discuss our varying experience using open source products; namely Apache OODT, Oracle Berkley DB XML, Apache Solr, and Oracle OpenSSO (now named OpenAM). Apache OODT, developed at NASA's Jet Propulsion Laboratory and recently migrated over to Apache, provided the means for ingestion and cataloguing of products within the infrastructure. Its usage was based upon team experience with the project and past benefit received on other projects internal and external to JPL. Berkeley DB XML, distributed by Oracle for both commercial and open source use, was the storage technology chosen for our metadata. This decision was in part based on our use Federal Geographic Data Committee (FGDC) Metadata, which is expressed in XML, and the desire to keep it in its native form and exploit other technologies built on top of XML. Apache Solr, an open source search engine, was used to drive our search interface and as way to store references to metadata and data exposed via REST endpoints. As was the case with Apache OODT there was team experience with this component that helped drive this choice. Lastly, OpenSSO, an open source single sign on service, was used to secure and provide access constraints to our REST based services. For this product there was little past experience but given our service based approach seemed to be a natural fit. Given our exposure to open source we will discuss the tradeoffs and benefits received by the choices made. Moreover, we will dive into the context of how the software packages were used and the impact of their design and extensibility had on the construction of the infrastructure. Finally, we will compare our encounter across open source solutions and attributes that can vary the impression one will get. This comprehensive account of our endeavor should aid others in their assessment and use of open source.

High-performance semiconductor quantum-dot single-photon sources

NASA Astrophysics Data System (ADS)

Senellart, Pascale; Solomon, Glenn; White, Andrew

2017-11-01

Single photons are a fundamental element of most quantum optical technologies. The ideal single-photon source is an on-demand, deterministic, single-photon source delivering light pulses in a well-defined polarization and spatiotemporal mode, and containing exactly one photon. In addition, for many applications, there is a quantum advantage if the single photons are indistinguishable in all their degrees of freedom. Single-photon sources based on parametric down-conversion are currently used, and while excellent in many ways, scaling to large quantum optical systems remains challenging. In 2000, semiconductor quantum dots were shown to emit single photons, opening a path towards integrated single-photon sources. Here, we review the progress achieved in the past few years, and discuss remaining challenges. The latest quantum dot-based single-photon sources are edging closer to the ideal single-photon source, and have opened new possibilities for quantum technologies.

Open source and DIY hardware for DNA nanotechnology labs

PubMed Central

Damase, Tulsi R.; Stephens, Daniel; Spencer, Adam; Allen, Peter B.

2015-01-01

A set of instruments and specialized equipment is necessary to equip a laboratory to work with DNA. Reducing the barrier to entry for DNA manipulation should enable and encourage new labs to enter the field. We present three examples of open source/DIY technology with significantly reduced costs relative to commercial equipment. This includes a gel scanner, a horizontal PAGE gel mold, and a homogenizer for generating DNA-coated particles. The overall cost savings obtained by using open source/DIY equipment was between 50 and 90%. PMID:26457320

a Framework for AN Open Source Geospatial Certification Model

NASA Astrophysics Data System (ADS)

Khan, T. U. R.; Davis, P.; Behr, F.-J.

2016-06-01

The geospatial industry is forecasted to have an enormous growth in the forthcoming years and an extended need for well-educated workforce. Hence ongoing education and training play an important role in the professional life. Parallel, in the geospatial and IT arena as well in the political discussion and legislation Open Source solutions, open data proliferation, and the use of open standards have an increasing significance. Based on the Memorandum of Understanding between International Cartographic Association, OSGeo Foundation, and ISPRS this development led to the implementation of the ICA-OSGeo-Lab imitative with its mission "Making geospatial education and opportunities accessible to all". Discussions in this initiative and the growth and maturity of geospatial Open Source software initiated the idea to develop a framework for a worldwide applicable Open Source certification approach. Generic and geospatial certification approaches are already offered by numerous organisations, i.e., GIS Certification Institute, GeoAcademy, ASPRS, and software vendors, i. e., Esri, Oracle, and RedHat. They focus different fields of expertise and have different levels and ways of examination which are offered for a wide range of fees. The development of the certification framework presented here is based on the analysis of diverse bodies of knowledge concepts, i.e., NCGIA Core Curriculum, URISA Body Of Knowledge, USGIF Essential Body Of Knowledge, the "Geographic Information: Need to Know", currently under development, and the Geospatial Technology Competency Model (GTCM). The latter provides a US American oriented list of the knowledge, skills, and abilities required of workers in the geospatial technology industry and influenced essentially the framework of certification. In addition to the theoretical analysis of existing resources the geospatial community was integrated twofold. An online survey about the relevance of Open Source was performed and evaluated with 105 respondents worldwide. 15 interviews (face-to-face or by telephone) with experts in different countries provided additional insights into Open Source usage and certification. The findings led to the development of a certification framework of three main categories with in total eleven sub-categories, i.e., "Certified Open Source Geospatial Data Associate / Professional", "Certified Open Source Geospatial Analyst Remote Sensing & GIS", "Certified Open Source Geospatial Cartographer", "Certified Open Source Geospatial Expert", "Certified Open Source Geospatial Associate Developer / Professional Developer", "Certified Open Source Geospatial Architect". Each certification is described by pre-conditions, scope and objectives, course content, recommended software packages, target group, expected benefits, and the methods of examination. Examinations can be flanked by proofs of professional career paths and achievements which need a peer qualification evaluation. After a couple of years a recertification is required. The concept seeks the accreditation by the OSGeo Foundation (and other bodies) and international support by a group of geospatial scientific institutions to achieve wide and international acceptance for this Open Source geospatial certification model. A business case for Open Source certification and a corresponding SWOT model is examined to support the goals of the Geo-For-All initiative of the ICA-OSGeo pact.

Open-Source Low-Cost Wireless Potentiometric Instrument for pH Determination Experiments

ERIC Educational Resources Information Center

Jin, Hao; Qin, Yiheng; Pan, Si; Alam, Arif U.; Dong, Shurong; Ghosh, Raja; Deen, M. Jamal

2018-01-01

pH determination is an essential experiment in many chemistry laboratories. It requires a potentiometric instrument with extremely low input bias current to accurately measure the voltage between a pH sensing electrode and a reference electrode. In this technology report, we propose an open-source potentiometric instrument for pH determination…

Source-separated urine opens golden opportunities for microbial electrochemical technologies.

PubMed

Ledezma, Pablo; Kuntke, Philipp; Buisman, Cees J N; Keller, Jürg; Freguia, Stefano

2015-04-01

The food security of a booming global population demands a continuous and sustainable supply of fertilisers. Their current once-through use [especially of the macronutrients nitrogen (N), phosphorus (P), and potassium (K)] requires a paradigm shift towards recovery and reuse. In the case of source-separated urine, efficient recovery could supply 20% of current macronutrient usage and remove 50-80% of nutrients present in wastewater. However, suitable technology options are needed to allow nutrients to be separated from urine close to the source. Thus far none of the proposed solutions has been widely implemented due to intrinsic limitations. Microbial electrochemical technologies (METs) have proved to be technically and economically viable for N recovery from urine, opening the path for novel decentralised systems focused on nutrient recovery and reuse. Copyright © 2015 Elsevier Ltd. All rights reserved.

Open Source and Design Thinking at NASA: A Vision for Future Software

NASA Technical Reports Server (NTRS)

Trimble, Jay

2017-01-01

NASA Mission Control Software for the Visualization of data has historically been closed, accessible only to small groups of flight controllers, often bound to a specific mission discipline such as flight dynamics, health and status or mission planning. Open Mission Control Technologies (MCT) provides new capability for NASA mission controllers and, by being fully open source, opens up NASA software for the visualization of mission data to broader communities inside and outside of NASA. Open MCT is the product of a design thinking process within NASA, using participatory design and design sprints to build a product that serves users.

Develop Direct Geo-referencing System Based on Open Source Software and Hardware Platform

NASA Astrophysics Data System (ADS)

Liu, H. S.; Liao, H. M.

2015-08-01

Direct geo-referencing system uses the technology of remote sensing to quickly grasp images, GPS tracks, and camera position. These data allows the construction of large volumes of images with geographic coordinates. So that users can be measured directly on the images. In order to properly calculate positioning, all the sensor signals must be synchronized. Traditional aerial photography use Position and Orientation System (POS) to integrate image, coordinates and camera position. However, it is very expensive. And users could not use the result immediately because the position information does not embed into image. To considerations of economy and efficiency, this study aims to develop a direct geo-referencing system based on open source software and hardware platform. After using Arduino microcontroller board to integrate the signals, we then can calculate positioning with open source software OpenCV. In the end, we use open source panorama browser, panini, and integrate all these to open source GIS software, Quantum GIS. A wholesome collection of data - a data processing system could be constructed.

A Tour of Big Data, Open Source Data Management Technologies from the Apache Software Foundation

NASA Astrophysics Data System (ADS)

Mattmann, C. A.

2012-12-01

The Apache Software Foundation, a non-profit foundation charged with dissemination of open source software for the public good, provides a suite of data management technologies for distributed archiving, data ingestion, data dissemination, processing, triage and a host of other functionalities that are becoming critical in the Big Data regime. Apache is the world's largest open source software organization, boasting over 3000 developers from around the world all contributing to some of the most pervasive technologies in use today, from the HTTPD web server that powers a majority of Internet web sites to the Hadoop technology that is now projected at over a $1B dollar industry. Apache data management technologies are emerging as de facto off-the-shelf components for searching, distributing, processing and archiving key science data sets both geophysical, space and planetary based, all the way to biomedicine. In this talk, I will give a virtual tour of the Apache Software Foundation, its meritocracy and governance structure, and also its key big data technologies that organizations can take advantage of today and use to save cost, schedule, and resources in implementing their Big Data needs. I'll illustrate the Apache technologies in the context of several national priority projects, including the U.S. National Climate Assessment (NCA), and in the International Square Kilometre Array (SKA) project that are stretching the boundaries of volume, velocity, complexity, and other key Big Data dimensions.

40 CFR 424.17 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...

An Open-Source and Java-Technologies Approach to Web Applications

DTIC Science & Technology

2003-09-01

program for any purpose (Freedom 0). • The freedom to study how the program works, and adapt it to individual needs (Freedom 1). Access to the source...manage information for many purposes. Today a key technology that allows developers to make Web applications is server-side programming to generate a

40 CFR 424.17 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...

40 CFR 424.17 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...

40 CFR 424.17 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...

40 CFR 424.17 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...

Long distance education for croatian nurses with open source software.

PubMed

Radenovic, Aleksandar; Kalauz, Sonja

2006-01-01

Croatian Nursing Informatics Association (CNIA) has been established as result of continuing work on promoting nursing informatics in Croatia. Main goals of CNIA are promoting nursing informatics and education of nurses about nursing informatics and using information technology in nursing process. CNIA in start of work is developed three courses from nursing informatics all designed with support of long distance education with open source software. Courses are: A - 'From Data to Wisdom', B - 'Introduction to Nursing Informatics' and C - 'Nursing Informatics I'. Courses A and B are obligatory for C course. Technology used to implement these online courses is based on the open source Learning Management System (LMS), Claroline, free online collaborative learning platform. Courses are divided in two modules/days. First module/day participants have classical approach to education and second day with E-learning from home. These courses represent first courses from nursing informatics' and first long distance education for nurses also.

Implementation and Testing of Low Cost Uav Platform for Orthophoto Imaging

NASA Astrophysics Data System (ADS)

Brucas, D.; Suziedelyte-Visockiene, J.; Ragauskas, U.; Berteska, E.; Rudinskas, D.

2013-08-01

Implementation of Unmanned Aerial Vehicles for civilian applications is rapidly increasing. Technologies which were expensive and available only for military use have recently spread on civilian market. There is a vast number of low cost open source components and systems for implementation on UAVs available. Using of low cost hobby and open source components ensures considerable decrease of UAV price, though in some cases compromising its reliability. In Space Science and Technology Institute (SSTI) in collaboration with Vilnius Gediminas Technical University (VGTU) researches have been performed in field of constructing and implementation of small UAVs composed of low cost open source components (and own developments). Most obvious and simple implementation of such UAVs - orthophoto imaging with data download and processing after the flight. The construction, implementation of UAVs, flight experience, data processing and data implementation will be further covered in the paper and presentation.

Developing open source, self-contained disease surveillance software applications for use in resource-limited settings

PubMed Central

2012-01-01

Background Emerging public health threats often originate in resource-limited countries. In recognition of this fact, the World Health Organization issued revised International Health Regulations in 2005, which call for significantly increased reporting and response capabilities for all signatory nations. Electronic biosurveillance systems can improve the timeliness of public health data collection, aid in the early detection of and response to disease outbreaks, and enhance situational awareness. Methods As components of its Suite for Automated Global bioSurveillance (SAGES) program, The Johns Hopkins University Applied Physics Laboratory developed two open-source, electronic biosurveillance systems for use in resource-limited settings. OpenESSENCE provides web-based data entry, analysis, and reporting. ESSENCE Desktop Edition provides similar capabilities for settings without internet access. Both systems may be configured to collect data using locally available cell phone technologies. Results ESSENCE Desktop Edition has been deployed for two years in the Republic of the Philippines. Local health clinics have rapidly adopted the new technology to provide daily reporting, thus eliminating the two-to-three week data lag of the previous paper-based system. Conclusions OpenESSENCE and ESSENCE Desktop Edition are two open-source software products with the capability of significantly improving disease surveillance in a wide range of resource-limited settings. These products, and other emerging surveillance technologies, can assist resource-limited countries compliance with the revised International Health Regulations. PMID:22950686

Utilization of open source electronic health record around the world: A systematic review.

PubMed

Aminpour, Farzaneh; Sadoughi, Farahnaz; Ahamdi, Maryam

2014-01-01

Many projects on developing Electronic Health Record (EHR) systems have been carried out in many countries. The current study was conducted to review the published data on the utilization of open source EHR systems in different countries all over the world. Using free text and keyword search techniques, six bibliographic databases were searched for related articles. The identified papers were screened and reviewed during a string of stages for the irrelevancy and validity. The findings showed that open source EHRs have been wildly used by source limited regions in all continents, especially in Sub-Saharan Africa and South America. It would create opportunities to improve national healthcare level especially in developing countries with minimal financial resources. Open source technology is a solution to overcome the problems of high-costs and inflexibility associated with the proprietary health information systems.

Public Lab: Community-Based Approaches to Urban and Environmental Health and Justice.

PubMed

Rey-Mazón, Pablo; Keysar, Hagit; Dosemagen, Shannon; D'Ignazio, Catherine; Blair, Don

2018-06-01

This paper explores three cases of Do-It-Yourself, open-source technologies developed within the diverse array of topics and themes in the communities around the Public Laboratory for Open Technology and Science (Public Lab). These cases focus on aerial mapping, water quality monitoring and civic science practices. The techniques discussed have in common the use of accessible, community-built technologies for acquiring data. They are also concerned with embedding collaborative and open source principles into the objects, tools, social formations and data sharing practices that emerge from these inquiries. The focus is on developing processes of collaborative design and experimentation through material engagement with technology and issues of concern. Problem-solving, here, is a tactic, while the strategy is an ongoing engagement with the problem of participation in its technological, social and political dimensions especially considering the increasing centralization and specialization of scientific and technological expertise. The authors also discuss and reflect on the Public Lab's approach to civic science in light of ideas and practices of citizen/civic veillance, or "sousveillance", by emphasizing people before data, and by investigating the new ways of seeing and doing that this shift in perspective might provide.

JBoss Middleware for Spacecraft Trajectory Operations

NASA Technical Reports Server (NTRS)

Stensrud, Kjell; Srinivasan, Ravi; Hamm, Dustin

2008-01-01

This viewgraph presentation reviews the use of middleware for spacecraft trajectory planning. It reviews the following areas and questions: 1. Project Background - What is the environment where we are considering Open Source Middleware? 2. System Architecture - What technologies and design did we apply? 3. Testing overview - What are the quality scenarios and test points? 4. Project Conclusion - What did we learn about Open Source Middleware?

Free and Open Source Tools (FOSTs): An Empirical Investigation of Pre-Service Teachers' Competencies, Attitudes, and Pedagogical Intentions

ERIC Educational Resources Information Center

Asing-Cashman, Joyce G.; Gurung, Binod; Limbu, Yam B.; Rutledge, David

2014-01-01

This study examines the digital native pre-service teachers' (DNPSTs) perceptions of their competency, attitude, and pedagogical intention to use free and open source tools (FOSTs) in their future teaching. Participants were 294 PSTs who responded to pre-course surveys at the beginning of an educational technology course. Using the structural…

Open Source Software and Design-Based Research Symbiosis in Developing 3D Virtual Learning Environments: Examples from the iSocial Project

ERIC Educational Resources Information Center

Schmidt, Matthew; Galyen, Krista; Laffey, James; Babiuch, Ryan; Schmidt, Carla

2014-01-01

Design-based research (DBR) and open source software are both acknowledged as potentially productive ways for advancing learning technologies. These approaches have practical benefits for the design and development process and for building and leveraging community to augment and sustain design and development. This report presents a case study of…

Geowall: Investigations into low-cost stereo display technologies

USGS Publications Warehouse

Steinwand, Daniel R.; Davis, Brian; Weeks, Nathan

2003-01-01

Recently, the combination of new projection technology, fast, low-cost graphics cards, and Linux-powered personal computers has made it possible to provide a stereoprojection and stereoviewing system that is much more affordable than previous commercial solutions. These Geowall systems are low-cost visualization systems built with commodity off-the-shelf components, run on open-source (and other) operating systems, and using open-source applications software. In short, they are ?Beowulf-class? visualization systems that provide a cost-effective way for the U. S. Geological Survey to broaden participation in the visualization community and view stereoimagery and three-dimensional models2.

osni.info-Using free/libre/open source software to build a virtual international community for open source nursing informatics.

PubMed

Oyri, Karl; Murray, Peter J

2005-12-01

Many health informatics organizations seem to be slow to take up the advantages of dynamic, web-based technologies for providing services to, and interaction with, their members; these are often the very technologies they promote for use within healthcare environments. This paper aims to introduce some of the many free/libre/open source (FLOSS) applications that are now available to develop interactive websites and dynamic online communities as part of the structure of health informatics organizations, and to show how the Open Source Nursing Informatics Working Group (OSNI) of the special interest group in nursing informatics of the International Medical Informatics Association (IMIA-NI) is using some of these tools to develop an online community of nurse informaticians through their website, at . Some background introduction to FLOSS applications is used for the benefit of those less familiar with such tools, and examples of some of the FLOSS content management systems (CMS) being used by OSNI are described. The experiences of the OSNI will facilitate a knowledgeable nursing contribution to the wider discussions on the applications of FLOSS within health and healthcare, and provides a model that many other groups could adopt.

Vision 2010: The Future of Higher Education Business and Learning Applications

ERIC Educational Resources Information Center

Carey, Patrick; Gleason, Bernard

2006-01-01

The global software industry is in the midst of a major evolutionary shift--one based on open computing--and this trend, like many transformative trends in technology, is being led by the IT staffs and academic computing faculty of the higher education industry. The elements of this open computing approach are open source, open standards, open…

T-Check in Technologies for Interoperability: Web Services and Security--Single Sign-On

DTIC Science & Technology

2007-12-01

following tools: • Apache Tomcat 6.0—a Java Servlet container to host the Web services and a simple Web client application [Apache 2007a] • Apache Axis...Eclipse. Eclipse – an open development platform. http://www.eclipse.org/ (2007) [Hunter 2001] Hunter, Jason. Java Servlet Programming, 2nd Edition...Citation SAML 1.1 Java Toolkit SAML Ping Identity’s SAML-1.1 implementation [SourceID 2006] OpenSAML SAML An open source implementation of SAML 1.1

Open Source Clinical NLP - More than Any Single System.

PubMed

Masanz, James; Pakhomov, Serguei V; Xu, Hua; Wu, Stephen T; Chute, Christopher G; Liu, Hongfang

2014-01-01

The number of Natural Language Processing (NLP) tools and systems for processing clinical free-text has grown as interest and processing capability have surged. Unfortunately any two systems typically cannot simply interoperate, even when both are built upon a framework designed to facilitate the creation of pluggable components. We present two ongoing activities promoting open source clinical NLP. The Open Health Natural Language Processing (OHNLP) Consortium was originally founded to foster a collaborative community around clinical NLP, releasing UIMA-based open source software. OHNLP's mission currently includes maintaining a catalog of clinical NLP software and providing interfaces to simplify the interaction of NLP systems. Meanwhile, Apache cTAKES aims to integrate best-of-breed annotators, providing a world-class NLP system for accessing clinical information within free-text. These two activities are complementary. OHNLP promotes open source clinical NLP activities in the research community and Apache cTAKES bridges research to the health information technology (HIT) practice.

Three-dimensional printing physiology laboratory technology.

PubMed

Sulkin, Matthew S; Widder, Emily; Shao, Connie; Holzem, Katherine M; Gloschat, Christopher; Gutbrod, Sarah R; Efimov, Igor R

2013-12-01

Since its inception in 19th-century Germany, the physiology laboratory has been a complex and expensive research enterprise involving experts in various fields of science and engineering. Physiology research has been critically dependent on cutting-edge technological support of mechanical, electrical, optical, and more recently computer engineers. Evolution of modern experimental equipment is constrained by lack of direct communication between the physiological community and industry producing this equipment. Fortunately, recent advances in open source technologies, including three-dimensional printing, open source hardware and software, present an exciting opportunity to bring the design and development of research instrumentation to the end user, i.e., life scientists. Here we provide an overview on how to develop customized, cost-effective experimental equipment for physiology laboratories.

U.S. Tsunami Information technology (TIM) Modernization:Developing a Maintainable and Extensible Open Source Earthquake and Tsunami Warning System

NASA Astrophysics Data System (ADS)

Hellman, S. B.; Lisowski, S.; Baker, B.; Hagerty, M.; Lomax, A.; Leifer, J. M.; Thies, D. A.; Schnackenberg, A.; Barrows, J.

2015-12-01

Tsunami Information technology Modernization (TIM) is a National Oceanic and Atmospheric Administration (NOAA) project to update and standardize the earthquake and tsunami monitoring systems currently employed at the U.S. Tsunami Warning Centers in Ewa Beach, Hawaii (PTWC) and Palmer, Alaska (NTWC). While this project was funded by NOAA to solve a specific problem, the requirements that the delivered system be both open source and easily maintainable have resulted in the creation of a variety of open source (OS) software packages. The open source software is now complete and this is a presentation of the OS Software that has been funded by NOAA for benefit of the entire seismic community. The design architecture comprises three distinct components: (1) The user interface, (2) The real-time data acquisition and processing system and (3) The scientific algorithm library. The system follows a modular design with loose coupling between components. We now identify the major project constituents. The user interface, CAVE, is written in Java and is compatible with the existing National Weather Service (NWS) open source graphical system AWIPS. The selected real-time seismic acquisition and processing system is open source SeisComp3 (sc3). The seismic library (libseismic) contains numerous custom written and wrapped open source seismic algorithms (e.g., ML/mb/Ms/Mwp, mantle magnitude (Mm), w-phase moment tensor, bodywave moment tensor, finite-fault inversion, array processing). The seismic library is organized in a way (function naming and usage) that will be familiar to users of Matlab. The seismic library extends sc3 so that it can be called by the real-time system, but it can also be driven and tested outside of sc3, for example, by ObsPy or Earthworm. To unify the three principal components we have developed a flexible and lightweight communication layer called SeismoEdex.

Mode-locked thin-disk lasers and their potential application for high-power terahertz generation

NASA Astrophysics Data System (ADS)

Saraceno, Clara J.

2018-04-01

The progress achieved in the last few decades in the performance of ultrafast laser systems with high average power has been tremendous, and continues to provide momentum to new exciting applications, both in scientific research and technology. Among the various technological advances that have shaped this progress, mode-locked thin-disk oscillators have attracted significant attention as a unique technology capable of providing ultrashort pulses with high energy (tens to hundreds of microjoules) and at very high repetition rates (in the megahertz regime) from a single table-top oscillator. This technology opens the door to compact high repetition rate ultrafast sources spanning the entire electromagnetic spectrum from the XUV to the terahertz regime, opening various new application fields. In this article, we focus on their unexplored potential as compact driving sources for high average power terahertz generation.

Open source tools for management and archiving of digital microscopy data to allow integration with patient pathology and treatment information.

PubMed

Khushi, Matloob; Edwards, Georgina; de Marcos, Diego Alonso; Carpenter, Jane E; Graham, J Dinny; Clarke, Christine L

2013-02-12

Virtual microscopy includes digitisation of histology slides and the use of computer technologies for complex investigation of diseases such as cancer. However, automated image analysis, or website publishing of such digital images, is hampered by their large file sizes. We have developed two Java based open source tools: Snapshot Creator and NDPI-Splitter. Snapshot Creator converts a portion of a large digital slide into a desired quality JPEG image. The image is linked to the patient's clinical and treatment information in a customised open source cancer data management software (Caisis) in use at the Australian Breast Cancer Tissue Bank (ABCTB) and then published on the ABCTB website (http://www.abctb.org.au) using Deep Zoom open source technology. Using the ABCTB online search engine, digital images can be searched by defining various criteria such as cancer type, or biomarkers expressed. NDPI-Splitter splits a large image file into smaller sections of TIFF images so that they can be easily analysed by image analysis software such as Metamorph or Matlab. NDPI-Splitter also has the capacity to filter out empty images. Snapshot Creator and NDPI-Splitter are novel open source Java tools. They convert digital slides into files of smaller size for further processing. In conjunction with other open source tools such as Deep Zoom and Caisis, this suite of tools is used for the management and archiving of digital microscopy images, enabling digitised images to be explored and zoomed online. Our online image repository also has the capacity to be used as a teaching resource. These tools also enable large files to be sectioned for image analysis. The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/5330903258483934.

Dimensional Error in Rapid Prototyping with Open Source Software and Low-cost 3D-printer

PubMed Central

Andrade-Delgado, Laura; Telich-Tarriba, Jose E.; Fuente-del-Campo, Antonio; Altamirano-Arcos, Carlos A.

2018-01-01

Summary: Rapid prototyping models (RPMs) had been extensively used in craniofacial and maxillofacial surgery, especially in areas such as orthognathic surgery, posttraumatic or oncological reconstructions, and implantology. Economic limitations are higher in developing countries such as Mexico, where resources dedicated to health care are limited, therefore limiting the use of RPM to few selected centers. This article aims to determine the dimensional error of a low-cost fused deposition modeling 3D printer (Tronxy P802MA, Shenzhen, Tronxy Technology Co), with Open source software. An ordinary dry human mandible was scanned with a computed tomography device. The data were processed with open software to build a rapid prototype with a fused deposition machine. Linear measurements were performed to find the mean absolute and relative difference. The mean absolute and relative difference was 0.65 mm and 1.96%, respectively (P = 0.96). Low-cost FDM machines and Open Source Software are excellent options to manufacture RPM, with the benefit of low cost and a similar relative error than other more expensive technologies. PMID:29464171

Dimensional Error in Rapid Prototyping with Open Source Software and Low-cost 3D-printer.

PubMed

Rendón-Medina, Marco A; Andrade-Delgado, Laura; Telich-Tarriba, Jose E; Fuente-Del-Campo, Antonio; Altamirano-Arcos, Carlos A

2018-01-01

Rapid prototyping models (RPMs) had been extensively used in craniofacial and maxillofacial surgery, especially in areas such as orthognathic surgery, posttraumatic or oncological reconstructions, and implantology. Economic limitations are higher in developing countries such as Mexico, where resources dedicated to health care are limited, therefore limiting the use of RPM to few selected centers. This article aims to determine the dimensional error of a low-cost fused deposition modeling 3D printer (Tronxy P802MA, Shenzhen, Tronxy Technology Co), with Open source software. An ordinary dry human mandible was scanned with a computed tomography device. The data were processed with open software to build a rapid prototype with a fused deposition machine. Linear measurements were performed to find the mean absolute and relative difference. The mean absolute and relative difference was 0.65 mm and 1.96%, respectively ( P = 0.96). Low-cost FDM machines and Open Source Software are excellent options to manufacture RPM, with the benefit of low cost and a similar relative error than other more expensive technologies.

Open source OCR framework using mobile devices

NASA Astrophysics Data System (ADS)

Zhou, Steven Zhiying; Gilani, Syed Omer; Winkler, Stefan

2008-02-01

Mobile phones have evolved from passive one-to-one communication device to powerful handheld computing device. Today most new mobile phones are capable of capturing images, recording video, and browsing internet and do much more. Exciting new social applications are emerging on mobile landscape, like, business card readers, sing detectors and translators. These applications help people quickly gather the information in digital format and interpret them without the need of carrying laptops or tablet PCs. However with all these advancements we find very few open source software available for mobile phones. For instance currently there are many open source OCR engines for desktop platform but, to our knowledge, none are available on mobile platform. Keeping this in perspective we propose a complete text detection and recognition system with speech synthesis ability, using existing desktop technology. In this work we developed a complete OCR framework with subsystems from open source desktop community. This includes a popular open source OCR engine named Tesseract for text detection & recognition and Flite speech synthesis module, for adding text-to-speech ability.

GIS-Based Noise Simulation Open Source Software: N-GNOIS

NASA Astrophysics Data System (ADS)

Vijay, Ritesh; Sharma, A.; Kumar, M.; Shende, V.; Chakrabarti, T.; Gupta, Rajesh

2015-12-01

Geographical information system (GIS)-based noise simulation software (N-GNOIS) has been developed to simulate the noise scenario due to point and mobile sources considering the impact of geographical features and meteorological parameters. These have been addressed in the software through attenuation modules of atmosphere, vegetation and barrier. N-GNOIS is a user friendly, platform-independent and open geospatial consortia (OGC) compliant software. It has been developed using open source technology (QGIS) and open source language (Python). N-GNOIS has unique features like cumulative impact of point and mobile sources, building structure and honking due to traffic. Honking is the most common phenomenon in developing countries and is frequently observed on any type of roads. N-GNOIS also helps in designing physical barrier and vegetation cover to check the propagation of noise and acts as a decision making tool for planning and management of noise component in environmental impact assessment (EIA) studies.

Utilization of open source electronic health record around the world: A systematic review

PubMed Central

Aminpour, Farzaneh; Sadoughi, Farahnaz; Ahamdi, Maryam

2014-01-01

Many projects on developing Electronic Health Record (EHR) systems have been carried out in many countries. The current study was conducted to review the published data on the utilization of open source EHR systems in different countries all over the world. Using free text and keyword search techniques, six bibliographic databases were searched for related articles. The identified papers were screened and reviewed during a string of stages for the irrelevancy and validity. The findings showed that open source EHRs have been wildly used by source limited regions in all continents, especially in Sub-Saharan Africa and South America. It would create opportunities to improve national healthcare level especially in developing countries with minimal financial resources. Open source technology is a solution to overcome the problems of high-costs and inflexibility associated with the proprietary health information systems. PMID:24672566

Lessons learned in the generation of biomedical research datasets using Semantic Open Data technologies.

PubMed

Legaz-García, María del Carmen; Miñarro-Giménez, José Antonio; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás

2015-01-01

Biomedical research usually requires combining large volumes of data from multiple heterogeneous sources. Such heterogeneity makes difficult not only the generation of research-oriented dataset but also its exploitation. In recent years, the Open Data paradigm has proposed new ways for making data available in ways that sharing and integration are facilitated. Open Data approaches may pursue the generation of content readable only by humans and by both humans and machines, which are the ones of interest in our work. The Semantic Web provides a natural technological space for data integration and exploitation and offers a range of technologies for generating not only Open Datasets but also Linked Datasets, that is, open datasets linked to other open datasets. According to the Berners-Lee's classification, each open dataset can be given a rating between one and five stars attending to can be given to each dataset. In the last years, we have developed and applied our SWIT tool, which automates the generation of semantic datasets from heterogeneous data sources. SWIT produces four stars datasets, given that fifth one can be obtained by being the dataset linked from external ones. In this paper, we describe how we have applied the tool in two projects related to health care records and orthology data, as well as the major lessons learned from such efforts.

Open-Source, Web-Based Dashboard Components for DICOM Connectivity.

PubMed

Bustamante, Catalina; Pineda, Julian; Rascovsky, Simon; Arango, Andres

2016-08-01

The administration of a DICOM network within an imaging healthcare institution requires tools that allow for monitoring of connectivity and availability for adequate uptime measurements and help guide technology management strategies. We present the implementation of an open-source widget for the Dashing framework that provides basic dashboard functionality allowing for monitoring of a DICOM network using network "ping" and DICOM "C-ECHO" operations.

Teaching, Doing, and Sharing Project Management in a Studio Environment: The Development of an Instructional Design Open-Source Project Management Textbook

ERIC Educational Resources Information Center

Randall, Daniel L.; Johnson, Jacquelyn C.; West, Richard E.; Wiley, David A.

2013-01-01

In this article, the authors present an example of a project-based course within a studio environment that taught collaborative innovation skills and produced an open-source project management textbook for the field of instructional design and technology. While innovation plays an important role in our economy, and many have studied how to teach…

Challenges of Implementing Free and Open Source Software (FOSS): Evidence from the Indian Educational Setting

ERIC Educational Resources Information Center

Thankachan, Briju; Moore, David Richard

2017-01-01

The use of Free and Open Source Software (FOSS), a subset of Information and Communication Technology (ICT), can reduce the cost of purchasing software. Despite the benefit in the initial purchase price of software, deploying software requires total cost that goes beyond the initial purchase price. Total cost is a silent issue of FOSS and can only…

The Open Source DataTurbine Initiative: Streaming Data Middleware for Environmental Observing Systems

NASA Technical Reports Server (NTRS)

Fountain T.; Tilak, S.; Shin, P.; Hubbard, P.; Freudinger, L.

2009-01-01

The Open Source DataTurbine Initiative is an international community of scientists and engineers sharing a common interest in real-time streaming data middleware and applications. The technology base of the OSDT Initiative is the DataTurbine open source middleware. Key applications of DataTurbine include coral reef monitoring, lake monitoring and limnology, biodiversity and animal tracking, structural health monitoring and earthquake engineering, airborne environmental monitoring, and environmental sustainability. DataTurbine software emerged as a commercial product in the 1990 s from collaborations between NASA and private industry. In October 2007, a grant from the USA National Science Foundation (NSF) Office of Cyberinfrastructure allowed us to transition DataTurbine from a proprietary software product into an open source software initiative. This paper describes the DataTurbine software and highlights key applications in environmental monitoring.

Engineering Review of ANCAUS/AVATAR: An Enabling Technology for the Autonomous Land Systems Program?

DTIC Science & Technology

2003-12-01

technology for future Autonomous Land System (ALS) autonomous vehicles . Since 1989, forward thinking engineering has characterized the history of ANC/EUS and...technology for future autonomous vehicles and that; (2) ALS should adopt commercial/open source technology to support a new ALS architecture and (3) ALS

UAV using the open-source flight-control-system in the application of aerial survey

NASA Astrophysics Data System (ADS)

Huang, Ji-chen; Ru, Chen

2015-12-01

The aerial survey as one of the branches of the Space Information Technology system, has an important application in data acquisition of the earth's surface. In recent years, the trend of UVA (unmanned aerial vehicle) to replace traditional survey aircraft has become increasingly obvious with the progress of science and technology. At present, the price of the commercial UAV Flight Control System is higher, limiting the application of UVA. This paper mainly discusses the possibility that the open-source's flight-control-system take the place of the commercial one. Result is that the costs of UVA are reduced, and make the application more widely.

75 FR 10439 - Cognitive Radio Technologies and Software Defined Radios

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... Technologies and Software Defined Radios AGENCY: Federal Communications Commission. ACTION: Final rule. SUMMARY... concerning the use of open source software to implement security features in software defined radios (SDRs... ongoing technical developments in cognitive and software defined radio (SDR) technologies. 2. On April 20...

How Does a Collaborative Community Affect Diverse Students' Engagement with an Open Source Software Project: A Pedagogical Paradigm

ERIC Educational Resources Information Center

Morgan, Becka S.

2012-01-01

Open Source Software (OSS) communities are homogenous and their lack of diversity is of concern to many within this field. This problem is becoming more pronounced as it is the practice of many technology companies to use OSS participation as a factor in the hiring process, disadvantaging those who are not a part of this community. We should…

Alone Together: A Socio-Technical Theory of Motivation, Coordination and Collaboration Technologies in Organizing for Free and Open Source Software Development

ERIC Educational Resources Information Center

Howison, James

2009-01-01

This dissertation presents evidence that the production of Free and Open Source Software (FLOSS) is far more alone than together; it is far more often individual work done "in company" than it is teamwork. When tasks appear too large for an individual they are more likely to be deferred until they are easier rather than be undertaken through…

Implementation of Phased Array Antenna Technology Providing a Wireless Local Area Network to Enhance Port Security and Maritime Interdiction Operations

DTIC Science & Technology

2009-09-01

boarding team, COTS, WLAN, smart antenna, OpenVPN application, wireless base station, OFDM, latency, point-to-point wireless link. 16. PRICE CODE 17...16 c. SSL/TLS .................................17 2. OpenVPN ......................................17 III. EXPERIMENT METHODOLOGY...network frame at Layer 2 has already been secured by encryption at a higher level. 2. OpenVPN OpenVPN is open source software that provides a VPN

Learner Ownership of Technology-Enhanced Learning

ERIC Educational Resources Information Center

Dommett, Eleanor J.

2018-01-01

Purpose: This paper aims to examine the different ways in which learners may have ownership over technology-enhanced learning by reflecting on technical, legal and psychological ownership. Design/methodology/approach: The paper uses a variety of examples of technology-enhanced learning ranging from open-source software to cloud storage to discuss…

Opportunity is Knocking: Will Education Open the Door? Carnegie Perspectives

ERIC Educational Resources Information Center

Iiyoshi, Toru

2006-01-01

This essay presents a discussion of how the tools and resources of open source education may demonstrably improve education quality. The main tenet of open education is to make educational assets freely available to the public. This is becoming easier and less expensive as network and multimedia technology evolves. Obstacles may stand in the way…

CoSN K12 Open Technologies Implementation Study #3. Moodle: An Open Learning Content Management System for Schools

ERIC Educational Resources Information Center

Consortium for School Networking (NJ1), 2008

2008-01-01

This report introduces educators to Moodle, an open-source software program for managing courses online. It briefly defines what Moodle is, what it can do, and gives specific examples of how it is being implemented. An appendix contains brief profiles of five school organizations that are using Moodle.

The use of open source bioinformatics tools to dissect transcriptomic data.

PubMed

Nitsche, Benjamin M; Ram, Arthur F J; Meyer, Vera

2012-01-01

Microarrays are a valuable technology to study fungal physiology on a transcriptomic level. Various microarray platforms are available comprising both single and two channel arrays. Despite different technologies, preprocessing of microarray data generally includes quality control, background correction, normalization, and summarization of probe level data. Subsequently, depending on the experimental design, diverse statistical analysis can be performed, including the identification of differentially expressed genes and the construction of gene coexpression networks.We describe how Bioconductor, a collection of open source and open development packages for the statistical programming language R, can be used for dissecting microarray data. We provide fundamental details that facilitate the process of getting started with R and Bioconductor. Using two publicly available microarray datasets from Aspergillus niger, we give detailed protocols on how to identify differentially expressed genes and how to construct gene coexpression networks.

Anser EMT: the first open-source electromagnetic tracking platform for image-guided interventions.

PubMed

Jaeger, Herman Alexander; Franz, Alfred Michael; O'Donoghue, Kilian; Seitel, Alexander; Trauzettel, Fabian; Maier-Hein, Lena; Cantillon-Murphy, Pádraig

2017-06-01

Electromagnetic tracking is the gold standard for instrument tracking and navigation in the clinical setting without line of sight. Whilst clinical platforms exist for interventional bronchoscopy and neurosurgical navigation, the limited flexibility and high costs of electromagnetic tracking (EMT) systems for research investigations mitigate against a better understanding of the technology's characterisation and limitations. The Anser project provides an open-source implementation for EMT with particular application to image-guided interventions. This work provides implementation schematics for our previously reported EMT system which relies on low-cost acquisition and demodulation techniques using both National Instruments and Arduino hardware alongside MATLAB support code. The system performance is objectively compared to other commercial tracking platforms using the Hummel assessment protocol. Positional accuracy of 1.14 mm and angular rotation accuracy of [Formula: see text] are reported. Like other EMT platforms, Anser is susceptible to tracking errors due to eddy current and ferromagnetic distortion. The system is compatible with commercially available EMT sensors as well as the Open Network Interface for image-guided therapy (OpenIGTLink) for easy communication with visualisation and medical imaging toolkits such as MITK and 3D Slicer. By providing an open-source platform for research investigations, we believe that novel and collaborative approaches can overcome the limitations of current EMT technology.

A Scalable, Open Source Platform for Data Processing, Archiving and Dissemination

DTIC Science & Technology

2016-01-01

Object Oriented Data Technology (OODT) big data toolkit developed by NASA and the Work-flow INstance Generation and Selection (WINGS) scientific work...to several challenge big data problems and demonstrated the utility of OODT-WINGS in addressing them. Specific demonstrated analyses address i...source software, Apache, Object Oriented Data Technology, OODT, semantic work-flows, WINGS, big data , work- flow management 16. SECURITY CLASSIFICATION OF

Understanding How the "Open" of Open Source Software (OSS) Will Improve Global Health Security.

PubMed

Hahn, Erin; Blazes, David; Lewis, Sheri

2016-01-01

Improving global health security will require bold action in all corners of the world, particularly in developing settings, where poverty often contributes to an increase in emerging infectious diseases. In order to mitigate the impact of emerging pandemic threats, enhanced disease surveillance is needed to improve early detection and rapid response to outbreaks. However, the technology to facilitate this surveillance is often unattainable because of high costs, software and hardware maintenance needs, limited technical competence among public health officials, and internet connectivity challenges experienced in the field. One potential solution is to leverage open source software, a concept that is unfortunately often misunderstood. This article describes the principles and characteristics of open source software and how it may be applied to solve global health security challenges.

Open Source Clinical NLP – More than Any Single System

PubMed Central

Masanz, James; Pakhomov, Serguei V.; Xu, Hua; Wu, Stephen T.; Chute, Christopher G.; Liu, Hongfang

2014-01-01

The number of Natural Language Processing (NLP) tools and systems for processing clinical free-text has grown as interest and processing capability have surged. Unfortunately any two systems typically cannot simply interoperate, even when both are built upon a framework designed to facilitate the creation of pluggable components. We present two ongoing activities promoting open source clinical NLP. The Open Health Natural Language Processing (OHNLP) Consortium was originally founded to foster a collaborative community around clinical NLP, releasing UIMA-based open source software. OHNLP’s mission currently includes maintaining a catalog of clinical NLP software and providing interfaces to simplify the interaction of NLP systems. Meanwhile, Apache cTAKES aims to integrate best-of-breed annotators, providing a world-class NLP system for accessing clinical information within free-text. These two activities are complementary. OHNLP promotes open source clinical NLP activities in the research community and Apache cTAKES bridges research to the health information technology (HIT) practice. PMID:25954581

ImTK: an open source multi-center information management toolkit

NASA Astrophysics Data System (ADS)

Alaoui, Adil; Ingeholm, Mary Lou; Padh, Shilpa; Dorobantu, Mihai; Desai, Mihir; Cleary, Kevin; Mun, Seong K.

2008-03-01

The Information Management Toolkit (ImTK) Consortium is an open source initiative to develop robust, freely available tools related to the information management needs of basic, clinical, and translational research. An open source framework and agile programming methodology can enable distributed software development while an open architecture will encourage interoperability across different environments. The ISIS Center has conceptualized a prototype data sharing network that simulates a multi-center environment based on a federated data access model. This model includes the development of software tools to enable efficient exchange, sharing, management, and analysis of multimedia medical information such as clinical information, images, and bioinformatics data from multiple data sources. The envisioned ImTK data environment will include an open architecture and data model implementation that complies with existing standards such as Digital Imaging and Communications (DICOM), Health Level 7 (HL7), and the technical framework and workflow defined by the Integrating the Healthcare Enterprise (IHE) Information Technology Infrastructure initiative, mainly the Cross Enterprise Document Sharing (XDS) specifications.

The Role of Free/Libre and Open Source Software in Learning Health Systems.

PubMed

Paton, C; Karopka, T

2017-08-01

Objective: To give an overview of the role of Free/Libre and Open Source Software (FLOSS) in the context of secondary use of patient data to enable Learning Health Systems (LHSs). Methods: We conducted an environmental scan of the academic and grey literature utilising the MedFLOSS database of open source systems in healthcare to inform a discussion of the role of open source in developing LHSs that reuse patient data for research and quality improvement. Results: A wide range of FLOSS is identified that contributes to the information technology (IT) infrastructure of LHSs including operating systems, databases, frameworks, interoperability software, and mobile and web apps. The recent literature around the development and use of key clinical data management tools is also reviewed. Conclusions: FLOSS already plays a critical role in modern health IT infrastructure for the collection, storage, and analysis of patient data. The nature of FLOSS systems to be collaborative, modular, and modifiable may make open source approaches appropriate for building the digital infrastructure for a LHS. Georg Thieme Verlag KG Stuttgart.

Open source software integrated into data services of Japanese planetary explorations

NASA Astrophysics Data System (ADS)

Yamamoto, Y.; Ishihara, Y.; Otake, H.; Imai, K.; Masuda, K.

2015-12-01

Scientific data obtained by Japanese scientific satellites and lunar and planetary explorations are archived in DARTS (Data ARchives and Transmission System). DARTS provides the data with a simple method such as HTTP directory listing for long-term preservation while DARTS tries to provide rich web applications for ease of access with modern web technologies based on open source software. This presentation showcases availability of open source software through our services. KADIAS is a web-based application to search, analyze, and obtain scientific data measured by SELENE(Kaguya), a Japanese lunar orbiter. KADIAS uses OpenLayers to display maps distributed from Web Map Service (WMS). As a WMS server, open source software MapServer is adopted. KAGUYA 3D GIS (KAGUYA 3D Moon NAVI) provides a virtual globe for the SELENE's data. The main purpose of this application is public outreach. NASA World Wind Java SDK is used to develop. C3 (Cross-Cutting Comparisons) is a tool to compare data from various observations and simulations. It uses Highcharts to draw graphs on web browsers. Flow is a tool to simulate a Field-Of-View of an instrument onboard a spacecraft. This tool itself is open source software developed by JAXA/ISAS, and the license is BSD 3-Caluse License. SPICE Toolkit is essential to compile FLOW. SPICE Toolkit is also open source software developed by NASA/JPL, and the website distributes many spacecrafts' data. Nowadays, open source software is an indispensable tool to integrate DARTS services.

Embracing Open Source for NASA's Earth Science Data Systems

NASA Technical Reports Server (NTRS)

Baynes, Katie; Pilone, Dan; Boller, Ryan; Meyer, David; Murphy, Kevin

2017-01-01

The overarching purpose of NASAs Earth Science program is to develop a scientific understanding of Earth as a system. Scientific knowledge is most robust and actionable when resulting from transparent, traceable, and reproducible methods. Reproducibility includes open access to the data as well as the software used to arrive at results. Additionally, software that is custom-developed for NASA should be open to the greatest degree possible, to enable re-use across Federal agencies, reduce overall costs to the government, remove barriers to innovation, and promote consistency through the use of uniform standards. Finally, Open Source Software (OSS) practices facilitate collaboration between agencies and the private sector. To best meet these ends, NASAs Earth Science Division promotes the full and open sharing of not only all data, metadata, products, information, documentation, models, images, and research results but also the source code used to generate, manipulate and analyze them. This talk focuses on the challenges to open sourcing NASA developed software within ESD and the growing pains associated with establishing policies running the gamut of tracking issues, properly documenting build processes, engaging the open source community, maintaining internal compliance, and accepting contributions from external sources. This talk also covers the adoption of existing open source technologies and standards to enhance our custom solutions and our contributions back to the community. Finally, we will be introducing the most recent OSS contributions from NASA Earth Science program and promoting these projects for wider community review and adoption.

Open Source Hbim for Cultural Heritage: a Project Proposal

NASA Astrophysics Data System (ADS)

Diara, F.; Rinaudo, F.

2018-05-01

Actual technologies are changing Cultural Heritage research, analysis, conservation and development ways, allowing new innovative approaches. The possibility of integrating Cultural Heritage data, like archaeological information, inside a three-dimensional environment system (like a Building Information Modelling) involve huge benefits for its management, monitoring and valorisation. Nowadays there are many commercial BIM solutions. However, these tools are thought and developed mostly for architecture design or technical installations. An example of better solution could be a dynamic and open platform that might consider Cultural Heritage needs as priority. Suitable solution for better and complete data usability and accessibility could be guaranteed by open source protocols. This choice would allow adapting software to Cultural Heritage needs and not the opposite, thus avoiding methodological stretches. This work will focus exactly on analysis and experimentations about specific characteristics of these kind of open source software (DBMS, CAD, Servers) applied to a Cultural Heritage example, in order to verifying their flexibility, reliability and then creating a dynamic HBIM open source prototype. Indeed, it might be a starting point for a future creation of a complete HBIM open source solution that we could adapt to others Cultural Heritage researches and analysis.

A New Architecture for Visualization: Open Mission Control Technologies

NASA Technical Reports Server (NTRS)

Trimble, Jay

2017-01-01

Open Mission Control Technologies (MCT) is a new architecture for visualisation of mission data. Driven by requirements for new mission capabilities, including distributed mission operations, access to data anywhere, customization by users, synthesis of multiple data sources, and flexibility for multi-mission adaptation, Open MCT provides users with an integrated customizable environment. Developed at NASAs Ames Research Center (ARC), in collaboration with NASAs Advanced Multimission Operations System (AMMOS) and NASAs Jet Propulsion Laboratory (JPL), Open MCT is getting its first mission use on the Jason 3 Mission, and is also available in the testbed for the Mars 2020 Rover and for development use for NASAs Resource Prospector Lunar Rover. The open source nature of the project provides for use outside of space missions, including open source contributions from a community of users. The defining features of Open MCT for mission users are data integration, end user composition and multiple views. Data integration provides access to mission data across domains in one place, making data such as activities, timelines, telemetry, imagery, event timers and procedures available in one place, without application switching. End user composition provides users with layouts, which act as a canvas to assemble visualisations. Multiple views provide the capability to view the same data in different ways, with live switching of data views in place. Open MCT is browser based, and works on the desktop as well as tablets and phones, providing access to data anywhere. An early use case for mobile data access took place on the Resource Prospector (RP) Mission Distributed Operations Test, in which rover engineers in the field were able to view telemetry on their phones. We envision this capability providing decision support to on console operators from off duty personnel. The plug-in architecture also allows for adaptation for different mission capabilities. Different data types and capabilities may be added or removed using plugins. An API provides a means to write new capabilities and to create data adaptors. Data plugins exist for mission data sources for NASA missions. Adaptors have been written by international and commercial users. Open MCT is open source. Open source enables collaborative development across organizations and also makes the product available outside of the space community, providing a potential source of usage and ideas to drive product design and development. The combination of open source with an Apache 2 license, and distribution on GitHub, has enabled an active community of users and contributors. The spectrum of users for Open MCT is, to our knowledge, unprecedented for mission software. In addition to our NASA users, we have, through open source, had users and inquires on projects ranging from Internet of Things, to radio hobbyists, to farming projects. We have an active community of contributors, enabling a flow of ideas inside and outside of the space community.

Spatial Dmbs Architecture for a Free and Open Source Bim

NASA Astrophysics Data System (ADS)

Logothetis, S.; Valari, E.; Karachaliou, E.; Stylianidis, E.

2017-08-01

Recent research on the field of Building Information Modelling (BIM) technology, revealed that except of a few, accessible and free BIM viewers there is a lack of Free & Open Source Software (FOSS) BIM software for the complete BIM process. With this in mind and considering BIM as the technological advancement of Computer-Aided Design (CAD) systems, the current work proposes the use of a FOSS CAD software in order to extend its capabilities and transform it gradually into a FOSS BIM platform. Towards this undertaking, a first approach on developing a spatial Database Management System (DBMS) able to store, organize and manage the overall amount of information within a single application, is presented.

Comparison of Physics Frameworks for WebGL-Based Game Engine

NASA Astrophysics Data System (ADS)

Yogya, Resa; Kosala, Raymond

2014-03-01

Recently, a new technology called WebGL shows a lot of potentials for developing games. However since this technology is still new, there are still many potentials in the game development area that are not explored yet. This paper tries to uncover the potential of integrating physics frameworks with WebGL technology in a game engine for developing 2D or 3D games. Specifically we integrated three open source physics frameworks: Bullet, Cannon, and JigLib into a WebGL-based game engine. Using experiment, we assessed these frameworks in terms of their correctness or accuracy, performance, completeness and compatibility. The results show that it is possible to integrate open source physics frameworks into a WebGLbased game engine, and Bullet is the best physics framework to be integrated into the WebGL-based game engine.

Open source tools for management and archiving of digital microscopy data to allow integration with patient pathology and treatment information

PubMed Central

2013-01-01

Background Virtual microscopy includes digitisation of histology slides and the use of computer technologies for complex investigation of diseases such as cancer. However, automated image analysis, or website publishing of such digital images, is hampered by their large file sizes. Results We have developed two Java based open source tools: Snapshot Creator and NDPI-Splitter. Snapshot Creator converts a portion of a large digital slide into a desired quality JPEG image. The image is linked to the patient’s clinical and treatment information in a customised open source cancer data management software (Caisis) in use at the Australian Breast Cancer Tissue Bank (ABCTB) and then published on the ABCTB website (http://www.abctb.org.au) using Deep Zoom open source technology. Using the ABCTB online search engine, digital images can be searched by defining various criteria such as cancer type, or biomarkers expressed. NDPI-Splitter splits a large image file into smaller sections of TIFF images so that they can be easily analysed by image analysis software such as Metamorph or Matlab. NDPI-Splitter also has the capacity to filter out empty images. Conclusions Snapshot Creator and NDPI-Splitter are novel open source Java tools. They convert digital slides into files of smaller size for further processing. In conjunction with other open source tools such as Deep Zoom and Caisis, this suite of tools is used for the management and archiving of digital microscopy images, enabling digitised images to be explored and zoomed online. Our online image repository also has the capacity to be used as a teaching resource. These tools also enable large files to be sectioned for image analysis. Virtual Slides The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/5330903258483934 PMID:23402499

Open source drug discovery--a new paradigm of collaborative research in tuberculosis drug development.

PubMed

Bhardwaj, Anshu; Scaria, Vinod; Raghava, Gajendra Pal Singh; Lynn, Andrew Michael; Chandra, Nagasuma; Banerjee, Sulagna; Raghunandanan, Muthukurussi V; Pandey, Vikas; Taneja, Bhupesh; Yadav, Jyoti; Dash, Debasis; Bhattacharya, Jaijit; Misra, Amit; Kumar, Anil; Ramachandran, Srinivasan; Thomas, Zakir; Brahmachari, Samir K

2011-09-01

It is being realized that the traditional closed-door and market driven approaches for drug discovery may not be the best suited model for the diseases of the developing world such as tuberculosis and malaria, because most patients suffering from these diseases have poor paying capacity. To ensure that new drugs are created for patients suffering from these diseases, it is necessary to formulate an alternate paradigm of drug discovery process. The current model constrained by limitations for collaboration and for sharing of resources with confidentiality hampers the opportunities for bringing expertise from diverse fields. These limitations hinder the possibilities of lowering the cost of drug discovery. The Open Source Drug Discovery project initiated by Council of Scientific and Industrial Research, India has adopted an open source model to power wide participation across geographical borders. Open Source Drug Discovery emphasizes integrative science through collaboration, open-sharing, taking up multi-faceted approaches and accruing benefits from advances on different fronts of new drug discovery. Because the open source model is based on community participation, it has the potential to self-sustain continuous development by generating a storehouse of alternatives towards continued pursuit for new drug discovery. Since the inventions are community generated, the new chemical entities developed by Open Source Drug Discovery will be taken up for clinical trial in a non-exclusive manner by participation of multiple companies with majority funding from Open Source Drug Discovery. This will ensure availability of drugs through a lower cost community driven drug discovery process for diseases afflicting people with poor paying capacity. Hopefully what LINUX the World Wide Web have done for the information technology, Open Source Drug Discovery will do for drug discovery. Copyright © 2011 Elsevier Ltd. All rights reserved.

Modernizing the MagIC Paleomagnetic and Rock Magnetic Database Technology Stack to Encourage Code Reuse and Reproducible Science

NASA Astrophysics Data System (ADS)

Minnett, R.; Koppers, A. A. P.; Jarboe, N.; Jonestrask, L.; Tauxe, L.; Constable, C.

2016-12-01

The Magnetics Information Consortium (https://earthref.org/MagIC/) develops and maintains a database and web application for supporting the paleo-, geo-, and rock magnetic scientific community. Historically, this objective has been met with an Oracle database and a Perl web application at the San Diego Supercomputer Center (SDSC). The Oracle Enterprise Cluster at SDSC, however, was decommissioned in July of 2016 and the cost for MagIC to continue using Oracle became prohibitive. This provided MagIC with a unique opportunity to reexamine the entire technology stack and data model. MagIC has developed an open-source web application using the Meteor (http://meteor.com) framework and a MongoDB database. The simplicity of the open-source full-stack framework that Meteor provides has improved MagIC's development pace and the increased flexibility of the data schema in MongoDB encouraged the reorganization of the MagIC Data Model. As a result of incorporating actively developed open-source projects into the technology stack, MagIC has benefited from their vibrant software development communities. This has translated into a more modern web application that has significantly improved the user experience for the paleo-, geo-, and rock magnetic scientific community.

Entrepreneurial model based technology creative industries sector software through the use of free open source software for Universitas Pendidikan Indonesia students

NASA Astrophysics Data System (ADS)

Hasan, B.; Hasbullah; Purnama, W.; Hery, A.

2016-04-01

Creative industry development areas of software by using Free Open Source Software (FOSS) is expected to be one of the solutions to foster new entrepreneurs of the students who can open job opportunities and contribute to economic development in Indonesia. This study aims to create entrepreneurial coaching model based on the creative industries by utilizing FOSS software field as well as provide understanding and fostering entrepreneurial creative industries based field software for students of Universitas Pendidikan Indonesia. This activity phase begins with identifying entrepreneurs or business software technology that will be developed, training and mentoring, apprenticeship process at industrial partners, creation of business plans and monitoring and evaluation. This activity involves 30 UPI student which has the motivation to self-employment and have competence in the field of information technology. The results and outcomes expected from these activities is the birth of a number of new entrepreneurs from the students engaged in the software industry both software in the world of commerce (e-commerce) and education/learning (e-learning/LMS) and games.

NASA World Wind Near Real Time Data for Earth

NASA Astrophysics Data System (ADS)

Hogan, P.

2013-12-01

Innovation requires open standards for data exchange, not to mention ^access to data^ so that value-added, the information intelligence, can be continually created and advanced by the larger community. Likewise, innovation by academia and entrepreneurial enterprise alike, are greatly benefited by an open platform that provides the basic technology for access and visualization of that data. NASA World Wind Java, and now NASA World Wind iOS for the iPhone and iPad, provides that technology. Whether the interest is weather science or climate science, emergency response or supply chain, seeing spatial data in its native context of Earth accelerates understanding and improves decision-making. NASA World Wind open source technology provides the basic elements for 4D visualization, using Open Geospatial Consortium (OGC) protocols, while allowing for customized access to any data, big or small, including support for NetCDF. NASA World Wind includes access to a suite of US Government WMS servers with near real time data. The larger community can readily capitalize on this technology, building their own value-added applications, either open or proprietary. Night lights heat map Glacier National Park

Building integrated business environments: analysing open-source ESB

NASA Astrophysics Data System (ADS)

Martínez-Carreras, M. A.; García Jimenez, F. J.; Gómez Skarmeta, A. F.

2015-05-01

Integration and interoperability are two concepts that have gained significant prominence in the business field, providing tools which enable enterprise application integration (EAI). In this sense, enterprise service bus (ESB) has played a crucial role as the underpinning technology for creating integrated environments in which companies may connect all their legacy-applications. However, the potential of these technologies remains unknown and some important features are not used to develop suitable business environments. The aim of this paper is to describe and detail the elements for building the next generation of integrated business environments (IBE) and to analyse the features of ESBs as the core of this infrastructure. For this purpose, we evaluate how well-known open-source ESB products fulfil these needs. Moreover, we introduce a scenario in which the collaborative system 'Alfresco' is integrated in the business infrastructure. Finally, we provide a comparison of the different open-source ESBs available for IBE requirements. According to this study, Fuse ESB provides the best results, considering features such as support for a wide variety of standards and specifications, documentation and implementation, security, advanced business trends, ease of integration and performance.

Open source clinical portals: a model for healthcare information systems to support care processes and feed clinical research. An Italian case of design, development, reuse, and exploitation.

PubMed

Locatelli, Paolo; Baj, Emanuele; Restifo, Nicola; Origgi, Gianni; Bragagia, Silvia

2011-01-01

Open source is a still unexploited chance for healthcare organizations and technology providers to answer to a growing demand for innovation and to join economical benefits with a new way of managing hospital information systems. This chapter will present the case of the web enterprise clinical portal developed in Italy by Niguarda Hospital in Milan with the support of Fondazione Politecnico di Milano, to enable a paperless environment for clinical and administrative activities in the ward. This represents also one rare case of open source technology and reuse in the healthcare sector, as the system's porting is now taking place at Besta Neurological Institute in Milan. This institute is customizing the portal to feed researchers with structured clinical data collected in its portal's patient records, so that they can be analyzed, e.g., through business intelligence tools. Both organizational and clinical advantages are investigated, from process monitoring, to semantic data structuring, to recognition of common patterns in care processes.

From Oss CAD to Bim for Cultural Heritage Digital Representation

NASA Astrophysics Data System (ADS)

Logothetis, S.; Karachaliou, E.; Stylianidis, E.

2017-02-01

The paper illustrates the use of open source Computer-aided design (CAD) environments in order to develop Building Information Modelling (BIM) tools able to manage 3D models in the field of cultural heritage. Nowadays, the development of Free and Open Source Software (FOSS) has been rapidly growing and their use tends to be consolidated. Although BIM technology is widely known and used, there is a lack of integrated open source platforms able to support all stages of Historic Building Information Modelling (HBIM) processes. The present research aims to use a FOSS CAD environment in order to develop BIM plug-ins which will be able to import and edit digital representations of cultural heritage models derived by photogrammetric methods.

Crawling The Web for Libre: Selecting, Integrating, Extending and Releasing Open Source Software

NASA Astrophysics Data System (ADS)

Truslove, I.; Duerr, R. E.; Wilcox, H.; Savoie, M.; Lopez, L.; Brandt, M.

2012-12-01

Libre is a project developed by the National Snow and Ice Data Center (NSIDC). Libre is devoted to liberating science data from its traditional constraints of publication, location, and findability. Libre embraces and builds on the notion of making knowledge freely available, and both Creative Commons licensed content and Open Source Software are crucial building blocks for, as well as required deliverable outcomes of the project. One important aspect of the Libre project is to discover cryospheric data published on the internet without prior knowledge of the location or even existence of that data. Inspired by well-known search engines and their underlying web crawling technologies, Libre has explored tools and technologies required to build a search engine tailored to allow users to easily discover geospatial data related to the polar regions. After careful consideration, the Libre team decided to base its web crawling work on the Apache Nutch project (http://nutch.apache.org). Nutch is "an open source web-search software project" written in Java, with good documentation, a significant user base, and an active development community. Nutch was installed and configured to search for the types of data of interest, and the team created plugins to customize the default Nutch behavior to better find and categorize these data feeds. This presentation recounts the Libre team's experiences selecting, using, and extending Nutch, and working with the Nutch user and developer community. We will outline the technical and organizational challenges faced in order to release the project's software as Open Source, and detail the steps actually taken. We distill these experiences into a set of heuristics and recommendations for using, contributing to, and releasing Open Source Software.

Internet Research, Uncensored

ERIC Educational Resources Information Center

Kean, Sam

2007-01-01

In this article, the author discusses a computer program called Psiphon which bypasses government filters undetected. The University of Toronto's Citizen Lab, a research center for digital media and politics, designed Psiphon for technology-savvy activists. Some technology-savvy activists use other open-source software, like Tor (which relies on…

Cloud based, Open Source Software Application for Mitigating Herbicide Drift

NASA Astrophysics Data System (ADS)

Saraswat, D.; Scott, B.

2014-12-01

The spread of herbicide resistant weeds has resulted in the need for clearly marked fields. In response to this need, the University of Arkansas Cooperative Extension Service launched a program named Flag the Technology in 2011. This program uses color-coded flags as a visual alert of the herbicide trait technology within a farm field. The flag based program also serves to help avoid herbicide misapplication and prevent herbicide drift damage between fields with differing crop technologies. This program has been endorsed by Southern Weed Science Society of America and is attracting interest from across the USA, Canada, and Australia. However, flags have risk of misplacement or disappearance due to mischief or severe windstorms/thunderstorms, respectively. This presentation will discuss the design and development of a cloud-based, free application utilizing open-source technologies, called Flag the Technology Cloud (FTTCloud), for allowing agricultural stakeholders to color code their farm fields for indicating herbicide resistant technologies. The developed software utilizes modern web development practices, widely used design technologies, and basic geographic information system (GIS) based interactive interfaces for representing, color-coding, searching, and visualizing fields. This program has also been made compatible for a wider usability on different size devices- smartphones, tablets, desktops and laptops.

FIA: An Open Forensic Integration Architecture for Composing Digital Evidence

NASA Astrophysics Data System (ADS)

Raghavan, Sriram; Clark, Andrew; Mohay, George

The analysis and value of digital evidence in an investigation has been the domain of discourse in the digital forensic community for several years. While many works have considered different approaches to model digital evidence, a comprehensive understanding of the process of merging different evidence items recovered during a forensic analysis is still a distant dream. With the advent of modern technologies, pro-active measures are integral to keeping abreast of all forms of cyber crimes and attacks. This paper motivates the need to formalize the process of analyzing digital evidence from multiple sources simultaneously. In this paper, we present the forensic integration architecture (FIA) which provides a framework for abstracting the evidence source and storage format information from digital evidence and explores the concept of integrating evidence information from multiple sources. The FIA architecture identifies evidence information from multiple sources that enables an investigator to build theories to reconstruct the past. FIA is hierarchically composed of multiple layers and adopts a technology independent approach. FIA is also open and extensible making it simple to adapt to technological changes. We present a case study using a hypothetical car theft case to demonstrate the concepts and illustrate the value it brings into the field.

Gas may be answer to world`s fuel needs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakicenovic, N.; Nolan, L.

1995-08-01

Natural gas could become the major energy source of the 21st century, serving as a {open_quotes}bridge{close_quotes} fuel from the use of fossil fuels today to renewable energy sources tomorrow, say Nebojsa Nakicenovic and Lucy Nolan. Nakicenovic is a project leader and Nolan is a former research assistant for the Environmentally Compatible Energy Strategies Project at an Austrian research institute. The use of nuclear energy will by stymied by public opposition, costs, and waste-storage problems; renewable energy technology, on the other hand, must still overcome many technological barriers. Natural gas, then, is likely to become our next dominant energy source. {open_quotes}Themore » development of a methane economy, led by increased use of natural gas, could provide another important step in the world`s century-old stride toward a carbon-free economy,{close_quotes} the authors conclude.« less

Tank Information System (tis): a Case Study in Migrating Web Mapping Application from Flex to Dojo for Arcgis Server and then to Open Source

NASA Astrophysics Data System (ADS)

Pulsani, B. R.

2017-11-01

Tank Information System is a web application which provides comprehensive information about minor irrigation tanks of Telangana State. As part of the program, a web mapping application using Flex and ArcGIS server was developed to make the data available to the public. In course of time as Flex be-came outdated, a migration of the client interface to the latest JavaScript based technologies was carried out. Initially, the Flex based application was migrated to ArcGIS JavaScript API using Dojo Toolkit. Both the client applications used published services from ArcGIS server. To check the migration pattern from proprietary to open source, the JavaScript based ArcGIS application was later migrated to OpenLayers and Dojo Toolkit which used published service from GeoServer. The migration pattern noticed in the study especially emphasizes upon the use of Dojo Toolkit and PostgreSQL database for ArcGIS server so that migration to open source could be performed effortlessly. The current ap-plication provides a case in study which could assist organizations in migrating their proprietary based ArcGIS web applications to open source. Furthermore, the study reveals cost benefits of adopting open source against commercial software's.

THE BERKELEY DATA ANALYSIS SYSTEM (BDAS): AN OPEN SOURCE PLATFORM FOR BIG DATA ANALYTICS

DTIC Science & Technology

2017-09-01

Evan Sparks, Oliver Zahn, Michael J. Franklin, David A. Patterson, Saul Perlmutter. Scientific Computing Meets Big Data Technology: An Astronomy ...Processing Astronomy Imagery Using Big Data Technology. IEEE Transaction on Big Data, 2016. Approved for Public Release; Distribution Unlimited. 22 [93

Open Source Dataturbine (OSDT) Android Sensorpod in Environmental Observing Systems

NASA Astrophysics Data System (ADS)

Fountain, T. R.; Shin, P.; Tilak, S.; Trinh, T.; Smith, J.; Kram, S.

2014-12-01

The OSDT Android SensorPod is a custom-designed mobile computing platform for assembling wireless sensor networks for environmental monitoring applications. Funded by an award from the Gordon and Betty Moore Foundation, the OSDT SensorPod represents a significant technological advance in the application of mobile and cloud computing technologies to near-real-time applications in environmental science, natural resources management, and disaster response and recovery. It provides a modular architecture based on open standards and open-source software that allows system developers to align their projects with industry best practices and technology trends, while avoiding commercial vendor lock-in to expensive proprietary software and hardware systems. The integration of mobile and cloud-computing infrastructure represents a disruptive technology in the field of environmental science, since basic assumptions about technology requirements are now open to revision, e.g., the roles of special purpose data loggers and dedicated site infrastructure. The OSDT Android SensorPod was designed with these considerations in mind, and the resulting system exhibits the following characteristics - it is flexible, efficient and robust. The system was developed and tested in the three science applications: 1) a fresh water limnology deployment in Wisconsin, 2) a near coastal marine science deployment at the UCSD Scripps Pier, and 3) a terrestrial ecological deployment in the mountains of Taiwan. As part of a public education and outreach effort, a Facebook page with daily ocean pH measurements from the UCSD Scripps pier was developed. Wireless sensor networks and the virtualization of data and network services is the future of environmental science infrastructure. The OSDT Android SensorPod was designed and developed to harness these new technology developments for environmental monitoring applications.

NOAA's Data Catalog and the Federal Open Data Policy

NASA Astrophysics Data System (ADS)

Wengren, M. J.; de la Beaujardiere, J.

2014-12-01

The 2013 Open Data Policy Presidential Directive requires Federal agencies to create and maintain a 'public data listing' that includes all agency data that is currently or will be made publicly-available in the future. The directive requires the use of machine-readable and open formats that make use of 'common core' and extensible metadata formats according to the best practices published in an online repository called 'Project Open Data', to use open licenses where possible, and to adhere to existing metadata and other technology standards to promote interoperability. In order to meet the requirements of the Open Data Policy, the National Oceanic and Atmospheric Administration (NOAA) has implemented an online data catalog that combines metadata from all subsidiary NOAA metadata catalogs into a single master inventory. The NOAA Data Catalog is available to the public for search and discovery, providing access to the NOAA master data inventory through multiple means, including web-based text search, OGC CS-W endpoint, as well as a native Application Programming Interface (API) for programmatic query. It generates on a daily basis the Project Open Data JavaScript Object Notation (JSON) file required for compliance with the Presidential directive. The Data Catalog is based on the open source Comprehensive Knowledge Archive Network (CKAN) software and runs on the Amazon Federal GeoCloud. This presentation will cover topics including mappings of existing metadata in standard formats (FGDC-CSDGM and ISO 19115 XML ) to the Project Open Data JSON metadata schema, representation of metadata elements within the catalog, and compatible metadata sources used to feed the catalog to include Web Accessible Folder (WAF), Catalog Services for the Web (CS-W), and Esri ArcGIS.com. It will also discuss related open source technologies that can be used together to build a spatial data infrastructure compliant with the Open Data Policy.

Clinical Interpretation of Variants in Cancer (CIViC) Knowledgebase | Informatics Technology for Cancer Research (ITCR)

Cancer.gov

CIViC is an open access, open source, community-driven web resource for Clinical Interpretation of Variants in Cancer. Our goal is to enable precision medicine by providing an educational forum for dissemination of knowledge and active discussion of the clinical significance of cancer genome alterations.

Sketching Up New Geographies: Open Sourcing and Curriculum Development

ERIC Educational Resources Information Center

Boyd, William; Ellis, David

2013-01-01

The functionality of web 2.0 technologies has caused academics to rethink their development of teaching and learning methods and approaches. The editable, open access nature of web 2.0 encourages the innovative collaboration of ideas, the creation of equitable visual and tactile learning environments, and opportunity for academics to develop…

Tracking Clouds with low cost GNSS chips aided by the Arduino platform

NASA Astrophysics Data System (ADS)

Hameed, Saji; Realini, Eugenio; Ishida, Shinya

2016-04-01

The Global Navigation Satellite System (GNSS) is a constellation of satellites that is used to provide geo-positioning services. Besides this application, the GNSS system is important for a wide range of scientific and civilian applications. For example, GNSS systems are routinely used in civilian applications such as surveying and scientific applications such as the study of crustal deformation. Another important scientific application of GNSS system is in meteorological research. Here it is mainly used to determine the total water vapour content of the troposphere, hereafter Precipitable Water Vapor (PWV). However, both GNSS receivers and software have prohibitively high price due to a variety of reasons. To overcome this somewhat artificial barrier we are exploring the use of low-cost GNSS receivers along with open source GNSS software for scientific research, in particular for GNSS meteorology research. To achieve this aim, we have developed a custom Arduino compatible data logging board that is able to operate together with a specific low-cost single frequency GNSS receiver chip from NVS Technologies AG. We have also developed an open-source software bundle that includes a new Arduino core for the Atmel324p chip, which is the main processor used in our custom logger. We have also developed software code that enables data collection, logging and parsing of the GNSS data stream. Additionally we have comprehensively evaluated the low power characteristics of the GNSS receiver and logger boards. Currently we are exploring the use of several openly source or free to use for research software to map GNSS delays to PWV. These include the open source goGPS (http://www.gogps-project.org/) and gLAB (http://gage.upc.edu/gLAB) and the openly available GAMIT software from Massachusetts Institute of Technology (MIT). We note that all the firmware and software developed as part of this project is available on an open source license.

Digital time stamping system based on open source technologies.

PubMed

Miskinis, Rimantas; Smirnov, Dmitrij; Urba, Emilis; Burokas, Andrius; Malysko, Bogdan; Laud, Peeter; Zuliani, Francesco

2010-03-01

A digital time stamping system based on open source technologies (LINUX-UBUNTU, OpenTSA, OpenSSL, MySQL) is described in detail, including all important testing results. The system, called BALTICTIME, was developed under a project sponsored by the European Commission under the Program FP 6. It was designed to meet the requirements posed to the systems of legal and accountable time stamping and to be applicable to the hardware commonly used by the national time metrology laboratories. The BALTICTIME system is intended for the use of governmental and other institutions as well as personal bodies. Testing results demonstrate that the time stamps issued to the user by BALTICTIME and saved in BALTICTIME's archives (which implies that the time stamps are accountable) meet all the regulatory requirements. Moreover, the BALTICTIME in its present implementation is able to issue more than 10 digital time stamps per second. The system can be enhanced if needed. The test version of the BALTICTIME service is free and available at http://baltictime. pfi.lt:8080/btws/ and http://baltictime.lnmc.lv:8080/btws/.

Monitoring Technology Proliferation: An Open Source Methodology For Generating Proliferation Intelligence

DTIC Science & Technology

1993-12-01

72 D. MINES AND THE MILITARY-TECHNOLOGICAL REVOLUTION ...................................... 74 E. CUSTOMIZING THE TDD PROLIFERATION MARKET M...Data Storage & Peripherals - Systems Managmnt Technologies 4. Passive Sensors - Sensors and Signal Processing 5. Photonics - Electronic and...a reproducible procedure to allow customization of the model, provides the "guts" of the method. 18 Third, because they are not optimized for

Implementation of Web-Based Education in Egypt through Cloud Computing Technologies and Its Effect on Higher Education

ERIC Educational Resources Information Center

El-Seoud, M. Samir Abou; El-Sofany, Hosam F.; Taj-Eddin, Islam A. T. F.; Nosseir, Ann; El-Khouly, Mahmoud M.

2013-01-01

The information technology educational programs at most universities in Egypt face many obstacles that can be overcome using technology enhanced learning. An open source Moodle eLearning platform has been implemented at many public and private universities in Egypt, as an aid to deliver e-content and to provide the institution with various…

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

Engaging Language Learners through Technology Integration: Theory, Applications, and Outcomes

ERIC Educational Resources Information Center

Li, Shuai, Ed.; Swanson, Peter, Ed.

2014-01-01

Web 2.0 technologies, open source software platforms, and mobile applications have transformed teaching and learning of second and foreign languages. Language teaching has transitioned from a teacher-centered approach to a student-centered approach through the use of Computer-Assisted Language Learning (CALL) and new teaching approaches.…

Open source tools to exploit DNA sequence data from livestock species

USDA-ARS?s Scientific Manuscript database

Next-Generation Sequencing (NGS) is a recent technological development that allows researchers to rapidly determine the DNA sequence of an individual. The decrease in cost of NGS has brought the technology into the realm of practical applications in livestock genomics, where it can be used to genera...

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

Applying Open Source Game Engine for Building Visual Simulation Training System of Fire Fighting

NASA Astrophysics Data System (ADS)

Yuan, Diping; Jin, Xuesheng; Zhang, Jin; Han, Dong

There's a growing need for fire departments to adopt a safe and fair method of training to ensure that the firefighting commander is in a position to manage a fire incident. Visual simulation training systems, with their ability to replicate and interact with virtual fire scenarios through the use of computer graphics or VR, become an effective and efficient method for fire ground education. This paper describes the system architecture and functions of a visual simulated training system of fire fighting on oil storage, which adopting Delat3D, a open source game and simulation engine, to provide realistic 3D views. It presents that using open source technology provides not only the commercial-level 3D effects but also a great reduction of cost.

Web Solutions Inspire Cloud Computing Software

NASA Technical Reports Server (NTRS)

2013-01-01

An effort at Ames Research Center to standardize NASA websites unexpectedly led to a breakthrough in open source cloud computing technology. With the help of Rackspace Inc. of San Antonio, Texas, the resulting product, OpenStack, has spurred the growth of an entire industry that is already employing hundreds of people and generating hundreds of millions in revenue.

Early Alert of Academically At-Risk Students: An Open Source Analytics Initiative

ERIC Educational Resources Information Center

Jayaprakash, Sandeep M.; Moody, Erik W.; Lauría, Eitel J. M.; Regan, James R.; Baron, Joshua D.

2014-01-01

The Open Academic Analytics Initiative (OAAI) is a collaborative, multi-year grant program aimed at researching issues related to the scaling up of learning analytics technologies and solutions across all of higher education. The paper describes the goals and objectives of the OAAI, depicts the process and challenges of collecting, organizing and…

75 FR 69373 - Source Specific Federal Implementation Plan for Implementing Best Available Retrofit Technology...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-12

... opportunities for questions and discussion, EPA will hold open houses prior to the public hearings. During these... comments, in English or Dine, and data pertaining to our proposal at the Public Hearing. English-Dine... Farmington. English-Dine translation services will not be provided at the Durango Open House and Public...

Open-source three-dimensional printing of biodegradable polymer scaffolds for tissue engineering.

PubMed

Trachtenberg, Jordan E; Mountziaris, Paschalia M; Miller, Jordan S; Wettergreen, Matthew; Kasper, Fred K; Mikos, Antonios G

2014-12-01

The fabrication of scaffolds for tissue engineering requires elements of customization depending on the application and is often limited due to the flexibility of the processing technique. This investigation seeks to address this obstacle by utilizing an open-source three-dimensional printing (3DP) system that allows vast customizability and facilitates reproduction of experiments. The effects of processing parameters on printed poly(ε-caprolactone) scaffolds with uniform and gradient pore architectures have been characterized with respect to fiber and pore morphology and mechanical properties. The results demonstrate the ability to tailor the fiber diameter, pore size, and porosity through modification of pressure, printing speed, and programmed fiber spacing. A model was also used to predict the compressive mechanical properties of uniform and gradient scaffolds, and it was found that modulus and yield strength declined with increasing porosity. The use of open-source 3DP technologies for printing tissue-engineering scaffolds provides a flexible system that can be readily modified at a low cost and is supported by community documentation. In this manner, the 3DP system is more accessible to the scientific community, which further facilitates the translation of these technologies toward successful tissue-engineering strategies.

Implementation of Open-Source Web Mapping Technologies to Support Monitoring of Governmental Schemes

NASA Astrophysics Data System (ADS)

Pulsani, B. R.

2015-10-01

Several schemes are undertaken by the government to uplift social and economic condition of people. The monitoring of these schemes is done through information technology where involvement of Geographic Information System (GIS) is lacking. To demonstrate the benefits of thematic mapping as a tool for assisting the officials in making decisions, a web mapping application for three government programs such as Mother and Child Tracking system (MCTS), Telangana State Housing Corporation Limited (TSHCL) and Ground Water Quality Mapping (GWQM) has been built. Indeed the three applications depicted the distribution of various parameters thematically and helped in identifying the areas with higher and weaker distributions. Based on the three applications, the study tends to find similarities of many government schemes reflecting the nature of thematic mapping and hence deduces to implement this kind of approach for other schemes as well. These applications have been developed using SharpMap Csharp library which is a free and open source mapping library for developing geospatial applications. The study highlights upon the cost benefits of SharpMap and brings out the advantage of this library over proprietary vendors and further discusses its advantages over other open source libraries as well.

iGlobe Interactive Visualization and Analysis of Spatial Data

NASA Technical Reports Server (NTRS)

Hogan, Patrick

2012-01-01

iGlobe is open-source software built on NASA World Wind virtual globe technology. iGlobe provides a growing set of tools for weather science, climate research, and agricultural analysis. Up until now, these types of sophisticated tools have been developed in isolation by national agencies, academic institutions, and research organizations. By providing an open-source solution to analyze and visualize weather, climate, and agricultural data, the scientific and research communities can more readily advance solutions needed to understand better the dynamics of our home planet, Earth

Toward a Wireless Open Source Instrument: Functional Near-infrared Spectroscopy in Mobile Neuroergonomics and BCI Applications

PubMed Central

von Lühmann, Alexander; Herff, Christian; Heger, Dominic; Schultz, Tanja

2015-01-01

Brain-Computer Interfaces (BCIs) and neuroergonomics research have high requirements regarding robustness and mobility. Additionally, fast applicability and customization are desired. Functional Near-Infrared Spectroscopy (fNIRS) is an increasingly established technology with a potential to satisfy these conditions. EEG acquisition technology, currently one of the main modalities used for mobile brain activity assessment, is widely spread and open for access and thus easily customizable. fNIRS technology on the other hand has either to be bought as a predefined commercial solution or developed from scratch using published literature. To help reducing time and effort of future custom designs for research purposes, we present our approach toward an open source multichannel stand-alone fNIRS instrument for mobile NIRS-based neuroimaging, neuroergonomics and BCI/BMI applications. The instrument is low-cost, miniaturized, wireless and modular and openly documented on www.opennirs.org. It provides features such as scalable channel number, configurable regulated light intensities, programmable gain and lock-in amplification. In this paper, the system concept, hardware, software and mechanical implementation of the lightweight stand-alone instrument are presented and the evaluation and verification results of the instrument's hardware and physiological fNIRS functionality are described. Its capability to measure brain activity is demonstrated by qualitative signal assessments and a quantitative mental arithmetic based BCI study with 12 subjects. PMID:26617510

Web Server Security on Open Source Environments

NASA Astrophysics Data System (ADS)

Gkoutzelis, Dimitrios X.; Sardis, Manolis S.

Administering critical resources has never been more difficult that it is today. In a changing world of software innovation where major changes occur on a daily basis, it is crucial for the webmasters and server administrators to shield their data against an unknown arsenal of attacks in the hands of their attackers. Up until now this kind of defense was a privilege of the few, out-budgeted and low cost solutions let the defender vulnerable to the uprising of innovating attacking methods. Luckily, the digital revolution of the past decade left its mark, changing the way we face security forever: open source infrastructure today covers all the prerequisites for a secure web environment in a way we could never imagine fifteen years ago. Online security of large corporations, military and government bodies is more and more handled by open source application thus driving the technological trend of the 21st century in adopting open solutions to E-Commerce and privacy issues. This paper describes substantial security precautions in facing privacy and authentication issues in a totally open source web environment. Our goal is to state and face the most known problems in data handling and consequently propose the most appealing techniques to face these challenges through an open solution.

NASA's Core Trajectory Sub-System Project: Using JBoss Enterprise Middleware for Building Software Systems Used to Support Spacecraft Trajectory Operations

NASA Technical Reports Server (NTRS)

Stensrud, Kjell C.; Hamm, Dustin

2007-01-01

NASA's Johnson Space Center (JSC) / Flight Design and Dynamics Division (DM) has prototyped the use of Open Source middleware technology for building its next generation spacecraft mission support system. This is part of a larger initiative to use open standards and open source software as building blocks for future mission and safety critical systems. JSC is hoping to leverage standardized enterprise architectures, such as Java EE, so that its internal software development efforts can be focused on the core aspects of their problem domain. This presentation will outline the design and implementation of the Trajectory system and the lessons learned during the exercise.

A new chapter in environmental sensing: The Open-Source Published Environmental Sensing (OPENS) laboratory

NASA Astrophysics Data System (ADS)

Selker, J. S.; Roques, C.; Higgins, C. W.; Good, S. P.; Hut, R.; Selker, A.

2015-12-01

The confluence of 3-Dimensional printing, low-cost solid-state-sensors, low-cost, low-power digital controllers (e.g., Arduinos); and open-source publishing (e.g., Github) is poised to transform environmental sensing. The Open-Source Published Environmental Sensing (OPENS) laboratory has launched and is available for all to use. OPENS combines cutting edge technologies and makes them available to the global environmental sensing community. OPENS includes a Maker lab space where people may collaborate in person or virtually via on-line forum for the publication and discussion of environmental sensing technology (Corvallis, Oregon, USA, please feel free to request a free reservation for space and equipment use). The physical lab houses a test-bed for sensors, as well as a complete classical machine shop, 3-D printers, electronics development benches, and workstations for code development. OPENS will provide a web-based formal publishing framework wherein global students and scientists can peer-review publish (with DOI) novel and evolutionary advancements in environmental sensor systems. This curated and peer-reviewed digital collection will include complete sets of "printable" parts and operating computer code for sensing systems. The physical lab will include all of the machines required to produce these sensing systems. These tools can be addressed in person or virtually, creating a truly global venue for advancement in monitoring earth's environment and agricultural systems. In this talk we will present an example of the process of design and publication the design and data from the OPENS-Permeameter. The publication includes 3-D printing code, Arduino (or other control/logging platform) operational code; sample data sets, and a full discussion of the design set in the scientific context of previous related devices. Editors for the peer-review process are currently sought - contact John.Selker@Oregonstate.edu or Clement.Roques@Oregonstate.edu.

The openEHR Java reference implementation project.

PubMed

Chen, Rong; Klein, Gunnar

2007-01-01

The openEHR foundation has developed an innovative design for interoperable and future-proof Electronic Health Record (EHR) systems based on a dual model approach with a stable reference information model complemented by archetypes for specific clinical purposes.A team from Sweden has implemented all the stable specifications in the Java programming language and donated the source code to the openEHR foundation. It was adopted as the openEHR Java Reference Implementation in March 2005 and released under open source licenses. This encourages early EHR implementation projects around the world and a number of groups have already started to use this code. The early Java implementation experience has also led to the publication of the openEHR Java Implementation Technology Specification. A number of design changes to the specifications and important minor corrections have been directly initiated by the implementation project over the last two years. The Java Implementation has been important for the validation and improvement of the openEHR design specifications and provides building blocks for future EHR systems.

A Platform for Innovation and Standards Evaluation: a Case Study from the OpenMRS Open-Source Radiology Information System.

PubMed

Gichoya, Judy W; Kohli, Marc; Ivange, Larry; Schmidt, Teri S; Purkayastha, Saptarshi

2018-05-10

Open-source development can provide a platform for innovation by seeking feedback from community members as well as providing tools and infrastructure to test new standards. Vendors of proprietary systems may delay adoption of new standards until there are sufficient incentives such as legal mandates or financial incentives to encourage/mandate adoption. Moreover, open-source systems in healthcare have been widely adopted in low- and middle-income countries and can be used to bridge gaps that exist in global health radiology. Since 2011, the authors, along with a community of open-source contributors, have worked on developing an open-source radiology information system (RIS) across two communities-OpenMRS and LibreHealth. The main purpose of the RIS is to implement core radiology workflows, on which others can build and test new radiology standards. This work has resulted in three major releases of the system, with current architectural changes driven by changing technology, development of new standards in health and imaging informatics, and changing user needs. At their core, both these communities are focused on building general-purpose EHR systems, but based on user contributions from the fringes, we have been able to create an innovative system that has been used by hospitals and clinics in four different countries. We provide an overview of the history of the LibreHealth RIS, the architecture of the system, overview of standards integration, describe challenges of developing an open-source product, and future directions. Our goal is to attract more participation and involvement to further develop the LibreHealth RIS into an Enterprise Imaging System that can be used in other clinical imaging including pathology and dermatology.

A classification and evaluation of data movement technologies for the delivery of highly voluminous scientific data products

NASA Technical Reports Server (NTRS)

Mattmann, Chris A.; Kelly, Sean; Crichton, Daniel J.; Hughes, J. Steven; Hardman, Sean; Ramirez, Paul; Joyner, Ron

2006-01-01

In this paper, we present a preliminary study of several different electronic data movement technologies. We detail our approach to classifying the technologies included in our study and present the preliminary results of some initial performance benchmarking. Our studies suggest that highly parallel TCP/IP streaming technologies, such as GridFTP and bbFTP, outperform commercial and open-source UDP-bursting technologies in several of the key data movement dimensions that we studied.

BioContainers: an open-source and community-driven framework for software standardization.

PubMed

da Veiga Leprevost, Felipe; Grüning, Björn A; Alves Aflitos, Saulo; Röst, Hannes L; Uszkoreit, Julian; Barsnes, Harald; Vaudel, Marc; Moreno, Pablo; Gatto, Laurent; Weber, Jonas; Bai, Mingze; Jimenez, Rafael C; Sachsenberg, Timo; Pfeuffer, Julianus; Vera Alvarez, Roberto; Griss, Johannes; Nesvizhskii, Alexey I; Perez-Riverol, Yasset

2017-08-15

BioContainers (biocontainers.pro) is an open-source and community-driven framework which provides platform independent executable environments for bioinformatics software. BioContainers allows labs of all sizes to easily install bioinformatics software, maintain multiple versions of the same software and combine tools into powerful analysis pipelines. BioContainers is based on popular open-source projects Docker and rkt frameworks, that allow software to be installed and executed under an isolated and controlled environment. Also, it provides infrastructure and basic guidelines to create, manage and distribute bioinformatics containers with a special focus on omics technologies. These containers can be integrated into more comprehensive bioinformatics pipelines and different architectures (local desktop, cloud environments or HPC clusters). The software is freely available at github.com/BioContainers/. yperez@ebi.ac.uk. © The Author(s) 2017. Published by Oxford University Press.

BioContainers: an open-source and community-driven framework for software standardization

PubMed Central

da Veiga Leprevost, Felipe; Grüning, Björn A.; Alves Aflitos, Saulo; Röst, Hannes L.; Uszkoreit, Julian; Barsnes, Harald; Vaudel, Marc; Moreno, Pablo; Gatto, Laurent; Weber, Jonas; Bai, Mingze; Jimenez, Rafael C.; Sachsenberg, Timo; Pfeuffer, Julianus; Vera Alvarez, Roberto; Griss, Johannes; Nesvizhskii, Alexey I.; Perez-Riverol, Yasset

2017-01-01

Abstract Motivation BioContainers (biocontainers.pro) is an open-source and community-driven framework which provides platform independent executable environments for bioinformatics software. BioContainers allows labs of all sizes to easily install bioinformatics software, maintain multiple versions of the same software and combine tools into powerful analysis pipelines. BioContainers is based on popular open-source projects Docker and rkt frameworks, that allow software to be installed and executed under an isolated and controlled environment. Also, it provides infrastructure and basic guidelines to create, manage and distribute bioinformatics containers with a special focus on omics technologies. These containers can be integrated into more comprehensive bioinformatics pipelines and different architectures (local desktop, cloud environments or HPC clusters). Availability and Implementation The software is freely available at github.com/BioContainers/. Contact yperez@ebi.ac.uk PMID:28379341

Virtualization of open-source secure web services to support data exchange in a pediatric critical care research network

PubMed Central

Sward, Katherine A; Newth, Christopher JL; Khemani, Robinder G; Cryer, Martin E; Thelen, Julie L; Enriquez, Rene; Shaoyu, Su; Pollack, Murray M; Harrison, Rick E; Meert, Kathleen L; Berg, Robert A; Wessel, David L; Shanley, Thomas P; Dalton, Heidi; Carcillo, Joseph; Jenkins, Tammara L; Dean, J Michael

2015-01-01

Objectives To examine the feasibility of deploying a virtual web service for sharing data within a research network, and to evaluate the impact on data consistency and quality. Material and Methods Virtual machines (VMs) encapsulated an open-source, semantically and syntactically interoperable secure web service infrastructure along with a shadow database. The VMs were deployed to 8 Collaborative Pediatric Critical Care Research Network Clinical Centers. Results Virtual web services could be deployed in hours. The interoperability of the web services reduced format misalignment from 56% to 1% and demonstrated that 99% of the data consistently transferred using the data dictionary and 1% needed human curation. Conclusions Use of virtualized open-source secure web service technology could enable direct electronic abstraction of data from hospital databases for research purposes. PMID:25796596

ADEpedia: a scalable and standardized knowledge base of Adverse Drug Events using semantic web technology.

PubMed

Jiang, Guoqian; Solbrig, Harold R; Chute, Christopher G

2011-01-01

A source of semantically coded Adverse Drug Event (ADE) data can be useful for identifying common phenotypes related to ADEs. We proposed a comprehensive framework for building a standardized ADE knowledge base (called ADEpedia) through combining ontology-based approach with semantic web technology. The framework comprises four primary modules: 1) an XML2RDF transformation module; 2) a data normalization module based on NCBO Open Biomedical Annotator; 3) a RDF store based persistence module; and 4) a front-end module based on a Semantic Wiki for the review and curation. A prototype is successfully implemented to demonstrate the capability of the system to integrate multiple drug data and ontology resources and open web services for the ADE data standardization. A preliminary evaluation is performed to demonstrate the usefulness of the system, including the performance of the NCBO annotator. In conclusion, the semantic web technology provides a highly scalable framework for ADE data source integration and standard query service.

40 CFR 440.44 - New source performance standards (NSPS).

Code of Federal Regulations, 2014 CFR

2014-07-01

... reduction attainable by the application of the best available demonstrated technology (BADT): (a) The concentration of pollutants discharged in mine drainage from mines, either open pit or underground, that produce...

40 CFR 440.44 - New source performance standards (NSPS).

Code of Federal Regulations, 2012 CFR

2012-07-01

... reduction attainable by the application of the best available demonstrated technology (BADT): (a) The concentration of pollutants discharged in mine drainage from mines, either open pit or underground, that produce...

40 CFR 440.44 - New source performance standards (NSPS).

Code of Federal Regulations, 2013 CFR

2013-07-01

... reduction attainable by the application of the best available demonstrated technology (BADT): (a) The concentration of pollutants discharged in mine drainage from mines, either open pit or underground, that produce...

Open source hardware solutions for low-cost, do-it-yourself environmental monitoring, citizen science, and STEM education

NASA Astrophysics Data System (ADS)

Hicks, S. D.; Aufdenkampe, A. K.; Horsburgh, J. S.; Arscott, D. B.; Muenz, T.; Bressler, D. W.

2016-12-01

The explosion in DIY open-source hardware and software has resulted in the development of affordable and accessible technologies, like drones and weather stations, that can greatly assist the general public in monitoring environmental health and its degradation. It is widely recognized that education and support of audiences in pursuit of STEM literacy and the application of emerging technologies is a challenge for the future of citizen science and for preparing high school graduates to be actively engaged in environmental stewardship. It is also clear that detecting environmental change/degradation over time and space will be greatly enhanced with expanded use of networked, remote monitoring technologies by watershed organizations and citizen scientists if data collection and reporting are properly carried out and curated. However, there are few focused efforts to link citizen scientists and school programs with these emerging tools. We have started a multi-year program to develop hardware and teaching materials for training students and citizen scientists about the use of open source hardware in environmental monitoring. Scientists and educators around the world have started building their own dataloggers and devices using a variety of boards based on open source electronics. This new hardware is now providing researchers with an inexpensive alternative to commercial data logging and transmission hardware. We will present a variety of hardware solutions using the Arduino-compatible EnviroDIY Mayfly board (http://envirodiy.org/mayfly) that can be used to build and deploy a rugged environmental monitoring station using a wide variety of sensors and options, giving the users a fully customizable device for making measurements almost anywhere. A database and visualization system is being developed that will allow the users to view and manage the data their devices are collecting. We will also present our plan for developing curricula and leading workshops to various school programs and citizen scientist groups to teach them how to build, deploy, and maintain their own environmental monitoring stations.

An Offline-Online Android Application for Hazard Event Mapping Using WebGIS Open Source Technologies

NASA Astrophysics Data System (ADS)

Olyazadeh, Roya; Jaboyedoff, Michel; Sudmeier-Rieux, Karen; Derron, Marc-Henri; Devkota, Sanjaya

2016-04-01

Nowadays, Free and Open Source Software (FOSS) plays an important role in better understanding and managing disaster risk reduction around the world. National and local government, NGOs and other stakeholders are increasingly seeking and producing data on hazards. Most of the hazard event inventories and land use mapping are based on remote sensing data, with little ground truthing, creating difficulties depending on the terrain and accessibility. Open Source WebGIS tools offer an opportunity for quicker and easier ground truthing of critical areas in order to analyse hazard patterns and triggering factors. This study presents a secure mobile-map application for hazard event mapping using Open Source WebGIS technologies such as Postgres database, Postgis, Leaflet, Cordova and Phonegap. The objectives of this prototype are: 1. An Offline-Online android mobile application with advanced Geospatial visualisation; 2. Easy Collection and storage of events information applied services; 3. Centralized data storage with accessibility by all the service (smartphone, standard web browser); 4. Improving data management by using active participation in hazard event mapping and storage. This application has been implemented as a low-cost, rapid and participatory method for recording impacts from hazard events and includes geolocation (GPS data and Internet), visualizing maps with overlay of satellite images, viewing uploaded images and events as cluster points, drawing and adding event information. The data can be recorded in offline (Android device) or online version (all browsers) and consequently uploaded through the server whenever internet is available. All the events and records can be visualized by an administrator and made public after approval. Different user levels can be defined to access the data for communicating the information. This application was tested for landslides in post-earthquake Nepal but can be used for any other type of hazards such as flood, avalanche, etc. Keywords: Offline, Online, WebGIS Open source, Android, Hazard Event Mapping

Assessment of Superstructure Ice Protection as Applied to Offshore Oil Operations Safety: Ice Protection Technologies, Safety Enhancements, and Development Needs

DTIC Science & Technology

2009-04-01

companies and Web site own- ers to use their tables and figures. This report was prepared under the general supervision of Janet Hardy, Chief...through reports about the technologies, sales and engineering literature, Web sites, and patents. Information in some circumstances was available from...the technologies are proprietary, some information sources were limited to Web sites and open literature. 5. TRL: Technology Readiness Level (TRL

Leveraging Open Standards and Technologies to Enhance Community Access to Earth Science Lidar Data

NASA Astrophysics Data System (ADS)

Crosby, C. J.; Nandigam, V.; Krishnan, S.; Cowart, C.; Baru, C.; Arrowsmith, R.

2011-12-01

Lidar (Light Detection and Ranging) data, collected from space, airborne and terrestrial platforms, have emerged as an invaluable tool for a variety of Earth science applications ranging from ice sheet monitoring to modeling of earth surface processes. However, lidar present a unique suite of challenges from the perspective of building cyberinfrastructure systems that enable the scientific community to access these valuable research datasets. Lidar data are typically characterized by millions to billions of individual measurements of x,y,z position plus attributes; these "raw" data are also often accompanied by derived raster products and are frequently terabytes in size. As a relatively new and rapidly evolving data collection technology, relevant open data standards and software projects are immature compared to those for other remote sensing platforms. The NSF-funded OpenTopography Facility project has developed an online lidar data access and processing system that co-locates data with on-demand processing tools to enable users to access both raw point cloud data as well as custom derived products and visualizations. OpenTopography is built on a Service Oriented Architecture (SOA) in which applications and data resources are deployed as standards compliant (XML and SOAP) Web services with the open source Opal Toolkit. To develop the underlying applications for data access, filtering and conversion, and various processing tasks, OpenTopography has heavily leveraged existing open source software efforts for both lidar and raster data. Operating on the de facto LAS binary point cloud format (maintained by ASPRS), open source libLAS and LASlib libraries provide OpenTopography data ingestion, query and translation capabilities. Similarly, raster data manipulation is performed through a suite of services built on the Geospatial Data Abstraction Library (GDAL). OpenTopography has also developed our own algorithm for high-performance gridding of lidar point cloud data, Points2Grid, and have released the code as an open source project. An emerging conversation that the lidar community and OpenTopography are actively engaged in is the need for open, community supported standards and metadata for both full waveform and terrestrial (waveform and discrete return) lidar data. Further, given the immature nature of many lidar data archives and limited online access to public domain data, there is an opportunity to develop interoperable data catalogs based on an open standard such as the OGC CSW specification to facilitate discovery and access to Earth science oriented lidar data.

Datacube Services in Action, Using Open Source and Open Standards

NASA Astrophysics Data System (ADS)

Baumann, P.; Misev, D.

2016-12-01

Array Databases comprise novel, promising technology for massive spatio-temporal datacubes, extending the SQL paradigm of "any query, anytime" to n-D arrays. On server side, such queries can be optimized, parallelized, and distributed based on partitioned array storage. The rasdaman ("raster data manager") system, which has pioneered Array Databases, is available in open source on www.rasdaman.org. Its declarative query language extends SQL with array operators which are optimized and parallelized on server side. The rasdaman engine, which is part of OSGeo Live, is mature and in operational use databases individually holding dozens of Terabytes. Further, the rasdaman concepts have strongly impacted international Big Data standards in the field, including the forthcoming MDA ("Multi-Dimensional Array") extension to ISO SQL, the OGC Web Coverage Service (WCS) and Web Coverage Processing Service (WCPS) standards, and the forthcoming INSPIRE WCS/WCPS; in both OGC and INSPIRE, OGC is WCS Core Reference Implementation. In our talk we present concepts, architecture, operational services, and standardization impact of open-source rasdaman, as well as experiences made.

Development of a web application for water resources based on open source software

NASA Astrophysics Data System (ADS)

Delipetrev, Blagoj; Jonoski, Andreja; Solomatine, Dimitri P.

2014-01-01

This article presents research and development of a prototype web application for water resources using latest advancements in Information and Communication Technologies (ICT), open source software and web GIS. The web application has three web services for: (1) managing, presenting and storing of geospatial data, (2) support of water resources modeling and (3) water resources optimization. The web application is developed using several programming languages (PhP, Ajax, JavaScript, Java), libraries (OpenLayers, JQuery) and open source software components (GeoServer, PostgreSQL, PostGIS). The presented web application has several main advantages: it is available all the time, it is accessible from everywhere, it creates a real time multi-user collaboration platform, the programing languages code and components are interoperable and designed to work in a distributed computer environment, it is flexible for adding additional components and services and, it is scalable depending on the workload. The application was successfully tested on a case study with concurrent multi-users access.

World Wind Tools Reveal Environmental Change

NASA Technical Reports Server (NTRS)

2012-01-01

Originally developed under NASA's Learning Technologies program as a tool to engage and inspire students, World Wind software was released under the NASA Open Source Agreement license. Honolulu, Hawaii based Intelesense Technologies is one of the companies currently making use of the technology for environmental, public health, and other monitoring applications for nonprofit organizations and Government agencies. The company saved about $1 million in development costs by using the NASA software.

40 CFR 440.44 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... attainable by the application of the best available demonstrated technology (BADT): (a) The concentration of pollutants discharged in mine drainage from mines, either open pit or underground, that produce mercury ores...

Open Ephys electroencephalography (Open Ephys  +  EEG): a modular, low-cost, open-source solution to human neural recording

NASA Astrophysics Data System (ADS)

Black, Christopher; Voigts, Jakob; Agrawal, Uday; Ladow, Max; Santoyo, Juan; Moore, Christopher; Jones, Stephanie

2017-06-01

Objective. Electroencephalography (EEG) offers a unique opportunity to study human neural activity non-invasively with millisecond resolution using minimal equipment in or outside of a lab setting. EEG can be combined with a number of techniques for closed-loop experiments, where external devices are driven by specific neural signals. However, reliable, commercially available EEG systems are expensive, often making them impractical for individual use and research development. Moreover, by design, a majority of these systems cannot be easily altered to the specification needed by the end user. We focused on mitigating these issues by implementing open-source tools to develop a new EEG platform to drive down research costs and promote collaboration and innovation. Approach. Here, we present methods to expand the open-source electrophysiology system, Open Ephys (www.openephys.org), to include human EEG recordings. We describe the equipment and protocol necessary to interface various EEG caps with the Open Ephys acquisition board, and detail methods for processing data. We present applications of Open Ephys  +  EEG as a research tool and discuss how this innovative EEG technology lays a framework for improved closed-loop paradigms and novel brain-computer interface experiments. Main results. The Open Ephys  +  EEG system can record reliable human EEG data, as well as human EMG data. A side-by-side comparison of eyes closed 8-14 Hz activity between the Open Ephys  +  EEG system and the Brainvision ActiCHamp EEG system showed similar average power and signal to noise. Significance. Open Ephys  +  EEG enables users to acquire high-quality human EEG data comparable to that of commercially available systems, while maintaining the price point and extensibility inherent to open-source systems.

Open Ephys electroencephalography (Open Ephys  +  EEG): a modular, low-cost, open-source solution to human neural recording.

PubMed

Black, Christopher; Voigts, Jakob; Agrawal, Uday; Ladow, Max; Santoyo, Juan; Moore, Christopher; Jones, Stephanie

2017-06-01

Electroencephalography (EEG) offers a unique opportunity to study human neural activity non-invasively with millisecond resolution using minimal equipment in or outside of a lab setting. EEG can be combined with a number of techniques for closed-loop experiments, where external devices are driven by specific neural signals. However, reliable, commercially available EEG systems are expensive, often making them impractical for individual use and research development. Moreover, by design, a majority of these systems cannot be easily altered to the specification needed by the end user. We focused on mitigating these issues by implementing open-source tools to develop a new EEG platform to drive down research costs and promote collaboration and innovation. Here, we present methods to expand the open-source electrophysiology system, Open Ephys (www.openephys.org), to include human EEG recordings. We describe the equipment and protocol necessary to interface various EEG caps with the Open Ephys acquisition board, and detail methods for processing data. We present applications of Open Ephys  +  EEG as a research tool and discuss how this innovative EEG technology lays a framework for improved closed-loop paradigms and novel brain-computer interface experiments. The Open Ephys  +  EEG system can record reliable human EEG data, as well as human EMG data. A side-by-side comparison of eyes closed 8-14 Hz activity between the Open Ephys  +  EEG system and the Brainvision ActiCHamp EEG system showed similar average power and signal to noise. Open Ephys  +  EEG enables users to acquire high-quality human EEG data comparable to that of commercially available systems, while maintaining the price point and extensibility inherent to open-source systems.

RADIOMICS.io | Informatics Technology for Cancer Research (ITCR)

Cancer.gov

RADIOMICS.io is a open source platform for informatics developments for radiographic phenotyping using automated algorithms, such as engineered features or using deep learning technologies. With this platform, we aim to establish a reference standard for radiomic analyses, provide a tested and maintained resource, and to grow the community of radiomic developers addressing critical needs in cancer research.

National Synchrotron Light Source II

ScienceCinema

Hill, John; Dooryhee, Eric; Wilkins, Stuart; Miller, Lisa; Chu, Yong

2018-01-16

NSLS-II is a synchrotron light source helping researchers explore solutions to the grand energy challenges faced by the nation, and open up new regimes of scientific discovery that will pave the way to discoveries in physics, chemistry, and biology — advances that will ultimately enhance national security and help drive the development of abundant, safe, and clean energy technologies.

The State of Open Source Electronic Health Record Projects: A Software Anthropology Study

PubMed Central

2017-01-01

Background Electronic health records (EHR) are a key tool in managing and storing patients’ information. Currently, there are over 50 open source EHR systems available. Functionality and usability are important factors for determining the success of any system. These factors are often a direct reflection of the domain knowledge and developers’ motivations. However, few published studies have focused on the characteristics of free and open source software (F/OSS) EHR systems and none to date have discussed the motivation, knowledge background, and demographic characteristics of the developers involved in open source EHR projects. Objective This study analyzed the characteristics of prevailing F/OSS EHR systems and aimed to provide an understanding of the motivation, knowledge background, and characteristics of the developers. Methods This study identified F/OSS EHR projects on SourceForge and other websites from May to July 2014. Projects were classified and characterized by license type, downloads, programming languages, spoken languages, project age, development status, supporting materials, top downloads by country, and whether they were “certified” EHRs. Health care F/OSS developers were also surveyed using an online survey. Results At the time of the assessment, we uncovered 54 open source EHR projects, but only four of them had been successfully certified under the Office of the National Coordinator for Health Information Technology (ONC Health IT) Certification Program. In the majority of cases, the open source EHR software was downloaded by users in the United States (64.07%, 148,666/232,034), underscoring that there is a significant interest in EHR open source applications in the United States. A survey of EHR open source developers was conducted and a total of 103 developers responded to the online questionnaire. The majority of EHR F/OSS developers (65.3%, 66/101) are participating in F/OSS projects as part of a paid activity and only 25.7% (26/101) of EHR F/OSS developers are, or have been, health care providers in their careers. In addition, 45% (45/99) of developers do not work in the health care field. Conclusion The research presented in this study highlights some challenges that may be hindering the future of health care F/OSS. A minority of developers have been health care professionals, and only 55% (54/99) work in the health care field. This undoubtedly limits the ability of functional design of F/OSS EHR systems from being a competitive advantage over prevailing commercial EHR systems. Open source software seems to be a significant interest to many; however, given that only four F/OSS EHR systems are ONC-certified, this interest is unlikely to yield significant adoption of these systems in the United States. Although the Health Information Technology for Economic and Clinical Health (HITECH) act was responsible for a substantial infusion of capital into the EHR marketplace, the lack of a corporate entity in most F/OSS EHR projects translates to a marginal capacity to market the respective F/OSS system and to navigate certification. This likely has further disadvantaged F/OSS EHR adoption in the United States. PMID:28235750

Better value digital health: the medium, the market and the role of openness.

PubMed

Reynolds, Carl J

2013-08-01

The recent NHS 'hack days' have showcased the enthusiasm and talent of the junior doctor body as well as the potential of open source, open governance and small-medium enterprise. There still remains much scope for developing better value digital health services within the NHS. This article sets out the current state of NHS information technology (IT), how it fails to meet the needs of patients and professionals alike and suggests how better value digital health can be achieved.

Free and Open Source Software for Geospatial in the field of planetary science

NASA Astrophysics Data System (ADS)

Frigeri, A.

2012-12-01

Information technology applied to geospatial analyses has spread quickly in the last ten years. The availability of OpenData and data from collaborative mapping projects increased the interest on tools, procedures and methods to handle spatially-related information. Free Open Source Software projects devoted to geospatial data handling are gaining a good success as the use of interoperable formats and protocols allow the user to choose what pipeline of tools and libraries is needed to solve a particular task, adapting the software scene to his specific problem. In particular, the Free Open Source model of development mimics the scientific method very well, and researchers should be naturally encouraged to take part to the development process of these software projects, as this represent a very agile way to interact among several institutions. When it comes to planetary sciences, geospatial Free Open Source Software is gaining a key role in projects that commonly involve different subjects in an international scenario. Very popular software suites for processing scientific mission data (for example, ISIS) and for navigation/planning (SPICE) are being distributed along with the source code and the interaction between user and developer is often very strict, creating a continuum between these two figures. A very widely spread library for handling geospatial data (GDAL) has started to support planetary data from the Planetary Data System, and recent contributions enabled the support to other popular data formats used in planetary science, as the Vicar one. The use of Geographic Information System in planetary science is now diffused, and Free Open Source GIS, open GIS formats and network protocols allow to extend existing tools and methods developed to solve Earth based problems, also to the case of the study of solar system bodies. A day in the working life of a researcher using Free Open Source Software for geospatial will be presented, as well as benefits and solutions to possible detriments coming from the effort required by using, supporting and contributing.

Global Health Innovation Technology Models.

PubMed

Harding, Kimberly

2016-01-01

Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC) research collaborators directly prevent the growth of sustainable Global Health innovation for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utilizing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to accelerate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

Global Health Innovation Technology Models

PubMed Central

Harding, Kimberly

2016-01-01

Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC) research collaborators directly prevent the growth of sustainable Global Health innovation for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utilizing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to accelerate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

The Setup Phase of Project Open Book: A Report to the Commission on Preservation and Access on the Status of an Effort to Convert Microfilm to Digital Imagery.

ERIC Educational Resources Information Center

Conway, Paul; Weaver, Shari

1994-01-01

This report documents the second phase of Yale University's Project Open Book, which explored the uses of digital technology for preservation of and access to deteriorating documents. Highlights include preconditions for project implementation; quality digital conversion; characteristics of source materials; digital document indexing; workflow…

Wiretapping the Internet

NASA Astrophysics Data System (ADS)

Antonelli, Charles J.; Honeyman, Peter

2001-02-01

This paper describes the Advanced Packet Vault, a technology for creating such a record by collecting and securely storing all packets observed on a network, with a scalable architecture intended to support network speeds in excess of 100 Mbps. Encryption is used to preserve users' security and privacy, permitting selected traffic to be made available without revealing other traffic. The Vault implementation, based on Linux and OpenBSD, is open-source.

plas.io: Open Source, Browser-based WebGL Point Cloud Visualization

NASA Astrophysics Data System (ADS)

Butler, H.; Finnegan, D. C.; Gadomski, P. J.; Verma, U. K.

2014-12-01

Point cloud data, in the form of Light Detection and Ranging (LiDAR), RADAR, or semi-global matching (SGM) image processing, are rapidly becoming a foundational data type to quantify and characterize geospatial processes. Visualization of these data, due to overall volume and irregular arrangement, is often difficult. Technological advancement in web browsers, in the form of WebGL and HTML5, have made interactivity and visualization capabilities ubiquitously available which once only existed in desktop software. plas.io is an open source JavaScript application that provides point cloud visualization, exploitation, and compression features in a web-browser platform, reducing the reliance for client-based desktop applications. The wide reach of WebGL and browser-based technologies mean plas.io's capabilities can be delivered to a diverse list of devices -- from phones and tablets to high-end workstations -- with very little custom software development. These properties make plas.io an ideal open platform for researchers and software developers to communicate visualizations of complex and rich point cloud data to devices to which everyone has easy access.

Open Source Radiation Hardened by Design Technology

NASA Technical Reports Server (NTRS)

Shuler, Robert

2016-01-01

The proposed technology allows use of the latest microcircuit technology with lowest power and fastest speed, with minimal delay and engineering costs, through new Radiation Hardened by Design (RHBD) techniques that do not require extensive process characterization, technique evaluation and re-design at each Moore's Law generation. The separation of critical node groups is explicitly parameterized so it can be increased as microcircuit technologies shrink. The technology will be open access to radiation tolerant circuit vendors. INNOVATION: This technology would enhance computation intensive applications such as autonomy, robotics, advanced sensor and tracking processes, as well as low power applications such as wireless sensor networks. OUTCOME / RESULTS: 1) Simulation analysis indicates feasibility. 2)Compact voting latch 65 nanometer test chip designed and submitted for fabrication -7/2016. INFUSION FOR SPACE / EARTH: This technology may be used in any digital integrated circuit in which a high level of resistance to Single Event Upsets is desired, and has the greatest benefit outside low earth orbit where cosmic rays are numerous.

A Technology Enhanced Learning Model for Quality Education

NASA Astrophysics Data System (ADS)

Sherly, Elizabeth; Uddin, Md. Meraj

Technology Enhanced Learning and Teaching (TELT) Model provides learning through collaborations and interactions with a framework for content development and collaborative knowledge sharing system as a supplementary for learning to improve the quality of education system. TELT deals with a unique pedagogy model for Technology Enhanced Learning System which includes course management system, digital library, multimedia enriched contents and video lectures, open content management system and collaboration and knowledge sharing systems. Open sources like Moodle and Wiki for content development, video on demand solution with a low cost mid range system, an exhaustive digital library are provided in a portal system. The paper depicts a case study of e-learning initiatives with TELT model at IIITM-K and how effectively implemented.

Evaluating open-source cloud computing solutions for geosciences

NASA Astrophysics Data System (ADS)

Huang, Qunying; Yang, Chaowei; Liu, Kai; Xia, Jizhe; Xu, Chen; Li, Jing; Gui, Zhipeng; Sun, Min; Li, Zhenglong

2013-09-01

Many organizations start to adopt cloud computing for better utilizing computing resources by taking advantage of its scalability, cost reduction, and easy to access characteristics. Many private or community cloud computing platforms are being built using open-source cloud solutions. However, little has been done to systematically compare and evaluate the features and performance of open-source solutions in supporting Geosciences. This paper provides a comprehensive study of three open-source cloud solutions, including OpenNebula, Eucalyptus, and CloudStack. We compared a variety of features, capabilities, technologies and performances including: (1) general features and supported services for cloud resource creation and management, (2) advanced capabilities for networking and security, and (3) the performance of the cloud solutions in provisioning and operating the cloud resources as well as the performance of virtual machines initiated and managed by the cloud solutions in supporting selected geoscience applications. Our study found that: (1) no significant performance differences in central processing unit (CPU), memory and I/O of virtual machines created and managed by different solutions, (2) OpenNebula has the fastest internal network while both Eucalyptus and CloudStack have better virtual machine isolation and security strategies, (3) Cloudstack has the fastest operations in handling virtual machines, images, snapshots, volumes and networking, followed by OpenNebula, and (4) the selected cloud computing solutions are capable for supporting concurrent intensive web applications, computing intensive applications, and small-scale model simulations without intensive data communication.

General consumer communication tools for improved image management and communication in medicine.

PubMed

Rosset, Chantal; Rosset, Antoine; Ratib, Osman

2005-12-01

We elected to explore new technologies emerging on the general consumer market that can improve and facilitate image and data communication in medical and clinical environment. These new technologies developed for communication and storage of data can improve the user convenience and facilitate the communication and transport of images and related data beyond the usual limits and restrictions of a traditional picture archiving and communication systems (PACS) network. We specifically tested and implemented three new technologies provided on Apple computer platforms. (1) We adopted the iPod, a MP3 portable player with a hard disk storage, to easily and quickly move large number of DICOM images. (2) We adopted iChat, a videoconference and instant-messaging software, to transmit DICOM images in real time to a distant computer for conferencing teleradiology. (3) Finally, we developed a direct secure interface to use the iDisk service, a file-sharing service based on the WebDAV technology, to send and share DICOM files between distant computers. These three technologies were integrated in a new open-source image navigation and display software called OsiriX allowing for manipulation and communication of multimodality and multidimensional DICOM image data sets. This software is freely available as an open-source project at http://homepage.mac.com/rossetantoine/OsiriX. Our experience showed that the implementation of these technologies allowed us to significantly enhance the existing PACS with valuable new features without any additional investment or the need for complex extensions of our infrastructure. The added features such as teleradiology, secure and convenient image and data communication, and the use of external data storage services open the gate to a much broader extension of our imaging infrastructure to the outside world.

Computational toxicology using the OpenTox application programming interface and Bioclipse

PubMed Central

2011-01-01

Background Toxicity is a complex phenomenon involving the potential adverse effect on a range of biological functions. Predicting toxicity involves using a combination of experimental data (endpoints) and computational methods to generate a set of predictive models. Such models rely strongly on being able to integrate information from many sources. The required integration of biological and chemical information sources requires, however, a common language to express our knowledge ontologically, and interoperating services to build reliable predictive toxicology applications. Findings This article describes progress in extending the integrative bio- and cheminformatics platform Bioclipse to interoperate with OpenTox, a semantic web framework which supports open data exchange and toxicology model building. The Bioclipse workbench environment enables functionality from OpenTox web services and easy access to OpenTox resources for evaluating toxicity properties of query molecules. Relevant cases and interfaces based on ten neurotoxins are described to demonstrate the capabilities provided to the user. The integration takes advantage of semantic web technologies, thereby providing an open and simplifying communication standard. Additionally, the use of ontologies ensures proper interoperation and reliable integration of toxicity information from both experimental and computational sources. Conclusions A novel computational toxicity assessment platform was generated from integration of two open science platforms related to toxicology: Bioclipse, that combines a rich scriptable and graphical workbench environment for integration of diverse sets of information sources, and OpenTox, a platform for interoperable toxicology data and computational services. The combination provides improved reliability and operability for handling large data sets by the use of the Open Standards from the OpenTox Application Programming Interface. This enables simultaneous access to a variety of distributed predictive toxicology databases, and algorithm and model resources, taking advantage of the Bioclipse workbench handling the technical layers. PMID:22075173

Investigating Information Technologies in Disasters: Three Essays on Micro-Blogging and Free and Open Source Software (FOSS) Environment

ERIC Educational Resources Information Center

Li, Pu

2012-01-01

This dissertation aims to investigate how advanced information technologies cope with the various demands of disaster response. It consists of three essays on the exploration of micro-blogging and FOSS environments. The first essay looks at the usage of micro-blogging in the aftermath of the massive 2008 China earthquake and explores the…

Design and Development of an Institutional Repository at the Indian Institute of Technology Kharagpur

ERIC Educational Resources Information Center

Sutradhar, B.

2006-01-01

Purpose: To describe how an institutional repository (IR) was set up, using open source software, at the Indian Institute of Technology (IIT) in Kharagpur. Members of the IIT can publish their research documents in the IR for online access as well as digital preservation. Material in this IR includes instructional materials, records, data sets,…

Technology Literacy and the MySpace Generation: They're Not Asking Permission

ERIC Educational Resources Information Center

McLester, Susan

2007-01-01

As open source and other participatory Web venues become the norm in the new century, educators will be facing an even more overwhelming technology learning curve. A new digital divide is in the future--one that is largely generational. At its heart will be the fundamental questions of what "school" really means and whether digital immigrants can…

IT Policies for Development: Analysis and Recommendations of Free Libre Open Source Software Initiatives of the Bolivarian Republic of Venezuela

ERIC Educational Resources Information Center

Maldonado Rangel, Edgar A.

2009-01-01

In recent years the two concepts of economic development and technological advancement have become entwined so that they have, in many cases, come to mean the same thing. For countries seeking economic development through engagement with the Information Economy, policies supporting technological development claim privileged positions in national…

Whose genome is it, anyway?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, E.

1996-09-27

The genome program has issued guidelines to ensure that sequencing is done on DNA from diverse sources who have given informed consent and are anonymous. Most current sources don`t meet those criteria. It may be the first question every nonexpert asks on learning about the Human Genome Project: Whose genome are we studying, anyway? It sounds naive, says one government scientist-so naive, in fact, that {open_quotes}we chuckle as we explain that we aren`t sequencing anyone`s genome in particular; we`re sequencing a representative genome{close_quotes} made up of a mosaic of DNA from a variety of anonymous sources. And Bruce Birren, amore » clone-maker now at the Massachusetts Institute of Technology`s (MIT`s) Whitehead Center for Genome Research says: {open_quotes}We spent many years pooh-poohing the question{close_quotes} of whose genome would be stored in the database. But now that labs have begun working on large stretches of human DNA-aiming to identify all 3 billion base pairs in the genetic code-the question no longer seems to laughable. To the distress of program managers in Bethesda, Maryland, the initial sources of DNA are not as diverse or as anonymous as they had assumed.« less

Personalized reminiscence therapy M-health application for patients living with dementia: Innovating using open source code repository.

PubMed

Zhang, Melvyn W B; Ho, Roger C M

2017-01-01

Dementia is known to be an illness which brings forth marked disability amongst the elderly individuals. At times, patients living with dementia do also experience non-cognitive symptoms, and these symptoms include that of hallucinations, delusional beliefs as well as emotional liability, sexualized behaviours and aggression. According to the National Institute of Clinical Excellence (NICE) guidelines, non-pharmacological techniques are typically the first-line option prior to the consideration of adjuvant pharmacological options. Reminiscence and music therapy are thus viable options. Lazar et al. [3] previously performed a systematic review with regards to the utilization of technology to delivery reminiscence based therapy to individuals who are living with dementia and has highlighted that technology does have benefits in the delivery of reminiscence therapy. However, to date, there has been a paucity of M-health innovations in this area. In addition, most of the current innovations are not personalized for each of the person living with Dementia. Prior research has highlighted the utility for open source repository in bioinformatics study. The authors hoped to explain how they managed to tap upon and make use of open source repository in the development of a personalized M-health reminiscence therapy innovation for patients living with dementia. The availability of open source code repository has changed the way healthcare professionals and developers develop smartphone applications today. Conventionally, a long iterative process is needed in the development of native application, mainly because of the need for native programming and coding, especially so if the application needs to have interactive features or features that could be personalized. Such repository enables the rapid and cost effective development of application. Moreover, developers are also able to further innovate, as less time is spend in the iterative process.

Development of AN Open-Source Automatic Deformation Monitoring System for Geodetical and Geotechnical Measurements

NASA Astrophysics Data System (ADS)

Engel, P.; Schweimler, B.

2016-04-01

The deformation monitoring of structures and buildings is an important task field of modern engineering surveying, ensuring the standing and reliability of supervised objects over a long period. Several commercial hardware and software solutions for the realization of such monitoring measurements are available on the market. In addition to them, a research team at the Neubrandenburg University of Applied Sciences (NUAS) is actively developing a software package for monitoring purposes in geodesy and geotechnics, which is distributed under an open source licence and free of charge. The task of managing an open source project is well-known in computer science, but it is fairly new in a geodetic context. This paper contributes to that issue by detailing applications, frameworks, and interfaces for the design and implementation of open hardware and software solutions for sensor control, sensor networks, and data management in automatic deformation monitoring. It will be discussed how the development effort of networked applications can be reduced by using free programming tools, cloud computing technologies, and rapid prototyping methods.

Open Air Silicon Deposition by Atmospheric Pressure Plasma under Local Ambient Gas Control

NASA Astrophysics Data System (ADS)

Naito, Teruki; Konno, Nobuaki; Yoshida, Yukihisa

2015-09-01

In this paper, we report open air silicon (Si) deposition by combining a silane free Si deposition technology and a newly developed local ambient gas control technology. Recently, material processing in open air has been investigated intensively. While a variety of materials have been deposited, there were only few reports on Si deposition due to the susceptibility to contamination and the hazardous nature of source materials. Since Si deposition is one of the most important processes in device fabrication, we have developed open air silicon deposition technologies in BEANS project. For a clean and safe process, a local ambient gas control head was designed. Process gas leakage was prevented by local evacuation, and air contamination was shut out by inert curtain gas. By numerical and experimental investigations, a safe and clean process condition with air contamination less than 10 ppm was achieved. Si film was deposited in open air by atmospheric pressure plasma enhanced chemical transport under the local ambient gas control. The film was microcrystalline Si with the crystallite size of 17 nm, and the Hall mobility was 2.3 cm2/V .s. These properties were comparable to those of Si films deposited in a vacuum chamber. This research has been conducted as one of the research items of New Energy and Industrial Technology Development Organization ``BEANS'' project.

A Roadmap for using Agile Development in a Traditional System

NASA Technical Reports Server (NTRS)

Streiffert, Barbara; Starbird, Thomas

2006-01-01

I. Ensemble Development Group: a) Produces activity planning software for in spacecraft; b) Built on Eclipse Rich Client Platform (open source development and runtime software); c) Funded by multiple sources including the Mars Technology Program; d) Incorporated the use of Agile Development. II. Next Generation Uplink Planning System: a) Researches the Activity Planning and Sequencing Subsystem for Mars Science Laboratory (APSS); b) APSS includes Ensemble, Activity Modeling, Constraint Checking, Command Editing and Sequencing tools plus other uplink generation utilities; c) Funded by the Mars Technology Program; d) Integrates all of the tools for APSS.

The State of Open Source Electronic Health Record Projects: A Software Anthropology Study.

PubMed

Alsaffar, Mona; Yellowlees, Peter; Odor, Alberto; Hogarth, Michael

2017-02-24

Electronic health records (EHR) are a key tool in managing and storing patients' information. Currently, there are over 50 open source EHR systems available. Functionality and usability are important factors for determining the success of any system. These factors are often a direct reflection of the domain knowledge and developers' motivations. However, few published studies have focused on the characteristics of free and open source software (F/OSS) EHR systems and none to date have discussed the motivation, knowledge background, and demographic characteristics of the developers involved in open source EHR projects. This study analyzed the characteristics of prevailing F/OSS EHR systems and aimed to provide an understanding of the motivation, knowledge background, and characteristics of the developers. This study identified F/OSS EHR projects on SourceForge and other websites from May to July 2014. Projects were classified and characterized by license type, downloads, programming languages, spoken languages, project age, development status, supporting materials, top downloads by country, and whether they were "certified" EHRs. Health care F/OSS developers were also surveyed using an online survey. At the time of the assessment, we uncovered 54 open source EHR projects, but only four of them had been successfully certified under the Office of the National Coordinator for Health Information Technology (ONC Health IT) Certification Program. In the majority of cases, the open source EHR software was downloaded by users in the United States (64.07%, 148,666/232,034), underscoring that there is a significant interest in EHR open source applications in the United States. A survey of EHR open source developers was conducted and a total of 103 developers responded to the online questionnaire. The majority of EHR F/OSS developers (65.3%, 66/101) are participating in F/OSS projects as part of a paid activity and only 25.7% (26/101) of EHR F/OSS developers are, or have been, health care providers in their careers. In addition, 45% (45/99) of developers do not work in the health care field. The research presented in this study highlights some challenges that may be hindering the future of health care F/OSS. A minority of developers have been health care professionals, and only 55% (54/99) work in the health care field. This undoubtedly limits the ability of functional design of F/OSS EHR systems from being a competitive advantage over prevailing commercial EHR systems. Open source software seems to be a significant interest to many; however, given that only four F/OSS EHR systems are ONC-certified, this interest is unlikely to yield significant adoption of these systems in the United States. Although the Health Information Technology for Economic and Clinical Health (HITECH) act was responsible for a substantial infusion of capital into the EHR marketplace, the lack of a corporate entity in most F/OSS EHR projects translates to a marginal capacity to market the respective F/OSS system and to navigate certification. This likely has further disadvantaged F/OSS EHR adoption in the United States. ©Mona Alsaffar, Peter Yellowlees, Alberto Odor, Michael Hogarth. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 24.02.2017.

Deepening Pre-Service Teachers' Knowledge of Technology, Pedagogy, and Content (TPACK) in an Elementary School Mathematics Methods Course

ERIC Educational Resources Information Center

Polly, Drew

2014-01-01

This paper presents the findings of a study that examined pre-service teachers' development of knowledge about technology, pedagogy and content (TPACK) during a mathematics pedagogy course focused on elementary school mathematics in the United States. Data sources included work samples from pre-service teachers as well as an open-ended survey…

Free and open source enabling technologies for patient-centric, guideline-based clinical decision support: a survey.

PubMed

Leong, T Y; Kaiser, K; Miksch, S

2007-01-01

Guideline-based clinical decision support is an emerging paradigm to help reduce error, lower cost, and improve quality in evidence-based medicine. The free and open source (FOS) approach is a promising alternative for delivering cost-effective information technology (IT) solutions in health care. In this paper, we survey the current FOS enabling technologies for patient-centric, guideline-based care, and discuss the current trends and future directions of their role in clinical decision support. We searched PubMed, major biomedical informatics websites, and the web in general for papers and links related to FOS health care IT systems. We also relied on our background and knowledge for specific subtopics. We focused on the functionalities of guideline modeling tools, and briefly examined the supporting technologies for terminology, data exchange and electronic health record (EHR) standards. To effectively support patient-centric, guideline-based care, the computerized guidelines and protocols need to be integrated with existing clinical information systems or EHRs. Technologies that enable such integration should be accessible, interoperable, and scalable. A plethora of FOS tools and techniques for supporting different knowledge management and quality assurance tasks involved are available. Many challenges, however, remain in their implementation. There are active and growing trends of deploying FOS enabling technologies for integrating clinical guidelines, protocols, and pathways into the main care processes. The continuing development and maturation of such technologies are likely to make increasingly significant contributions to patient-centric, guideline-based clinical decision support.

Open Biomedical Engineering education in Africa.

PubMed

Ahluwalia, Arti; Atwine, Daniel; De Maria, Carmelo; Ibingira, Charles; Kipkorir, Emmauel; Kiros, Fasil; Madete, June; Mazzei, Daniele; Molyneux, Elisabeth; Moonga, Kando; Moshi, Mainen; Nzomo, Martin; Oduol, Vitalice; Okuonzi, John

2015-08-01

Despite the virtual revolution, the mainstream academic community in most countries remains largely ignorant of the potential of web-based teaching resources and of the expansion of open source software, hardware and rapid prototyping. In the context of Biomedical Engineering (BME), where human safety and wellbeing is paramount, a high level of supervision and quality control is required before open source concepts can be embraced by universities and integrated into the curriculum. In the meantime, students, more than their teachers, have become attuned to continuous streams of digital information, and teaching methods need to adapt rapidly by giving them the skills to filter meaningful information and by supporting collaboration and co-construction of knowledge using open, cloud and crowd based technology. In this paper we present our experience in bringing these concepts to university education in Africa, as a way of enabling rapid development and self-sufficiency in health care. We describe the three summer schools held in sub-Saharan Africa where both students and teachers embraced the philosophy of open BME education with enthusiasm, and discuss the advantages and disadvantages of opening education in this way in the developing and developed world.

Integration of a clinical trial database with a PACS

NASA Astrophysics Data System (ADS)

van Herk, M.

2014-03-01

Many clinical trials use Electronic Case Report Forms (ECRF), e.g., from OpenClinica. Trial data is augmented if DICOM scans, dose cubes, etc. from the Picture Archiving and Communication System (PACS) are included for data mining. Unfortunately, there is as yet no structured way to collect DICOM objects in trial databases. In this paper, we obtain a tight integration of ECRF and PACS using open source software. Methods: DICOM identifiers for selected images/series/studies are stored in associated ECRF events (e.g., baseline) as follows: 1) JavaScript added to OpenClinica communicates using HTML with a gateway server inside the hospitals firewall; 2) On this gateway, an open source DICOM server runs scripts to query and select the data, returning anonymized identifiers; 3) The scripts then collects, anonymizes, zips and transmits selected data to a central trial server; 4) Here data is stored in a DICOM archive which allows authorized ECRF users to view and download the anonymous images associated with each event. Results: All integration scripts are open source. The PACS administrator configures the anonymization script and decides to use the gateway in passive (receiving) mode or in an active mode going out to the PACS to gather data. Our ECRF centric approach supports automatic data mining by iterating over the cases in the ECRF database, providing the identifiers to load images and the clinical data to correlate with image analysis results. Conclusions: Using open source software and web technology, a tight integration has been achieved between PACS and ECRF.

Using Citygml to Deploy Smart-City Services for Urban Ecosystems

NASA Astrophysics Data System (ADS)

Prandi, F.; De Amicis, R.; Piffer, S.; Soave, M.; Cadzow, S.; Gonzalez Boix, E.; D'Hont, E.

2013-05-01

The rapid technological evolution, which is characterizing all the disciplines involved within the wide concept of smart cities, becomes a key factor to trigger true user-driven innovation. In this context 3D city models will play an increasingly important role in our daily lives and become an essential part of the modern city information infrastructure (Spatial Data Infrastructure). The goal of this paper is to introduce the i-SCOPE (interoperable Smart City services through an Open Platform for urban Ecosystems) project methodology and implementations together with key technologies and open standards. Based on interoperable 3D CityGML UIMs, the aim of i-Scope is to deliver an open platform on top of which it possible to develop, within different domains, various "smart city" services. Moreover, in i-SCOPE different issues, transcending the mere technological domain, are being tackled, including aspects dealing with social and environmental issues. Indeed several tasks including citizen awareness, crowd source and voluntary based data collection as well as privacy issue concerning involved people should be considered.

Creating a Rackspace and NASA Nebula compatible cloud using the OpenStack project (Invited)

NASA Astrophysics Data System (ADS)

Clark, R.

2010-12-01

NASA and Rackspace have both provided technology to the OpenStack that allows anyone to create a private Infrastructure as a Service (IaaS) cloud using open source software and commodity hardware. OpenStack is designed and developed completely in the open and with an open governance process. NASA donated Nova, which powers the compute portion of NASA Nebula Cloud Computing Platform, and Rackspace donated Swift, which powers Rackspace Cloud Files. The project is now in continuous development by NASA, Rackspace, and hundreds of other participants. When you create a private cloud using Openstack, you will have the ability to easily interact with your private cloud, a government cloud, and an ecosystem of public cloud providers, using the same API.

Developing Online Communities with LAMP (Linux, Apache, MySQL, PHP) - the IMIA OSNI and CHIRAD Experiences.

PubMed

Murray, Peter J; Oyri, Karl

2005-01-01

Many health informatics organisations do not seem to use, on a practical basis, for the benefit of their activities and interaction with their members, the very technologies that they often promote for use within healthcare environments. In particular, many organisations seem to be slow to take up the benefits of interactive web technologies. This paper presents an introduction to some of the many free/libre and open source (FLOSS) applications currently available and using the LAMP - Linux, Apache, MySQL, PHP architecture - as a way of cheaply deploying reliable, scalable, and secure web applications. The experience of moving to applications using LAMP architecture, in particular that of the Open Source Nursing Informatics (OSNI) Working Group of the Special Interest Group in Nursing Informatics of the International Medical Informatics Association (IMIA-NI), in using PostNuke, a FLOSS Content Management System (CMS) illustrates many of the benefits of such applications. The experiences of the authors in installing and maintaining a large number of websites using FLOSS CMS to develop dynamic, interactive websites that facilitate real engagement with the members of IMIA-NI OSNI, the IMIA Open Source Working Group, and the Centre for Health Informatics Research and Development (CHIRAD), as well as other organisations, is used as the basis for discussing the potential benefits that could be realised by others within the health informatics community.

Cloud-Based Distributed Control of Unmanned Systems

DTIC Science & Technology

2015-04-01

during mission execution. At best, the data is saved onto hard-drives and is accessible only by the local team. Data history in a form available and...following open source technologies: GeoServer, OpenLayers, PostgreSQL , and PostGIS are chosen to implement the back-end database and server. A brief...geospatial map data. 3. PostgreSQL : An SQL-compliant object-relational database that easily scales to accommodate large amounts of data - upwards to

A reliable, low-cost picture archiving and communications system for small and medium veterinary practices built using open-source technology.

PubMed

Iotti, Bryan; Valazza, Alberto

2014-10-01

Picture Archiving and Communications Systems (PACS) are the most needed system in a modern hospital. As an integral part of the Digital Imaging and Communications in Medicine (DICOM) standard, they are charged with the responsibility for secure storage and accessibility of the diagnostic imaging data. These machines need to offer high performance, stability, and security while proving reliable and ergonomic in the day-to-day and long-term storage and retrieval of the data they safeguard. This paper reports the experience of the authors in developing and installing a compact and low-cost solution based on open-source technologies in the Veterinary Teaching Hospital for the University of Torino, Italy, during the course of the summer of 2012. The PACS server was built on low-cost x86-based hardware and uses an open source operating system derived from Oracle OpenSolaris (Oracle Corporation, Redwood City, CA, USA) to host the DCM4CHEE PACS DICOM server (DCM4CHEE, http://www.dcm4che.org ). This solution features very high data security and an ergonomic interface to provide easy access to a large amount of imaging data. The system has been in active use for almost 2 years now and has proven to be a scalable, cost-effective solution for practices ranging from small to very large, where the use of different hardware combinations allows scaling to the different deployments, while the use of paravirtualization allows increased security and easy migrations and upgrades.

Low-cost, portable open-source gas monitoring device based on chemosensory technology

NASA Astrophysics Data System (ADS)

Gotor, Raúl; Gaviña, Pablo; Costero, Ana M.

2015-08-01

We report herein the construction of an electronic device to perform the real-time digitalization of the color state of the optical chemosensors used in the detection of dangerous gases. To construct the device, we used open-source modular electronics, such as Arduino and Sparkfun components, as well as free and open-source software (FOSS). The basic principle of the operation of this device is the continuous color measurement of a chemosensor-doped sensing film, whose color changes in the presence of a specific gas. The chemosensor-sensing film can be prepared by using any of the widely available chemosensors for the desired gas. Color measurement is taken by two TCS230 color sensor ICs, reported to the microcontroller, and the results are displayed on an LCD display and pushed through a USB serial port. By using a cyanide optical chemosensor, we demonstrated the operation of the device as a HCN gas detector at low concentrations.

Virtualization of open-source secure web services to support data exchange in a pediatric critical care research network.

PubMed

Frey, Lewis J; Sward, Katherine A; Newth, Christopher J L; Khemani, Robinder G; Cryer, Martin E; Thelen, Julie L; Enriquez, Rene; Shaoyu, Su; Pollack, Murray M; Harrison, Rick E; Meert, Kathleen L; Berg, Robert A; Wessel, David L; Shanley, Thomas P; Dalton, Heidi; Carcillo, Joseph; Jenkins, Tammara L; Dean, J Michael

2015-11-01

To examine the feasibility of deploying a virtual web service for sharing data within a research network, and to evaluate the impact on data consistency and quality. Virtual machines (VMs) encapsulated an open-source, semantically and syntactically interoperable secure web service infrastructure along with a shadow database. The VMs were deployed to 8 Collaborative Pediatric Critical Care Research Network Clinical Centers. Virtual web services could be deployed in hours. The interoperability of the web services reduced format misalignment from 56% to 1% and demonstrated that 99% of the data consistently transferred using the data dictionary and 1% needed human curation. Use of virtualized open-source secure web service technology could enable direct electronic abstraction of data from hospital databases for research purposes. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

CellProfiler and KNIME: open source tools for high content screening.

PubMed

Stöter, Martin; Niederlein, Antje; Barsacchi, Rico; Meyenhofer, Felix; Brandl, Holger; Bickle, Marc

2013-01-01

High content screening (HCS) has established itself in the world of the pharmaceutical industry as an essential tool for drug discovery and drug development. HCS is currently starting to enter the academic world and might become a widely used technology. Given the diversity of problems tackled in academic research, HCS could experience some profound changes in the future, mainly with more imaging modalities and smart microscopes being developed. One of the limitations in the establishment of HCS in academia is flexibility and cost. Flexibility is important to be able to adapt the HCS setup to accommodate the multiple different assays typical of academia. Many cost factors cannot be avoided, but the costs of the software packages necessary to analyze large datasets can be reduced by using Open Source software. We present and discuss the Open Source software CellProfiler for image analysis and KNIME for data analysis and data mining that provide software solutions which increase flexibility and keep costs low.

EVALUATION OF FUGITIVE EMISSIONS USING GROUND-BASED OPTICAL REMOTE SENSING TECHNOLOGY

EPA Science Inventory

EPA has developed and evaluated a method for characterizing fugitive emissions from large area sources. The method, known as radial plume mapping (RPM) uses multiple-beam, scanning, optical remote sensing (ORS) instrumentation such as open-path Fourier transform infrared spectro...

HydroDesktop as a Community Designed and Developed Resource for Hydrologic Data Discovery and Analysis

NASA Astrophysics Data System (ADS)

Ames, D. P.

2013-12-01

As has been seen in other informatics fields, well-documented and appropriately licensed open source software tools have the potential to significantly increase both opportunities and motivation for inter-institutional science and technology collaboration. The CUAHSI HIS (and related HydroShare) projects have aimed to foster such activities in hydrology resulting in the development of many useful community software components including the HydroDesktop software application. HydroDesktop is an open source, GIS-based, scriptable software application for discovering data on the CUAHSI Hydrologic Information System and related resources. It includes a well-defined plugin architecture and interface to allow 3rd party developers to create extensions and add new functionality without requiring recompiling of the full source code. HydroDesktop is built in the C# programming language and uses the open source DotSpatial GIS engine for spatial data management. Capabilities include data search, discovery, download, visualization, and export. An extension that integrates the R programming language with HydroDesktop provides scripting and data automation capabilities and an OpenMI plugin provides the ability to link models. Current revision and updates to HydroDesktop include migration of core business logic to cross platform, scriptable Python code modules that can be executed in any operating system or linked into other software front-end applications.

Free and open-source automated 3-D microscope.

PubMed

Wijnen, Bas; Petersen, Emily E; Hunt, Emily J; Pearce, Joshua M

2016-11-01

Open-source technology not only has facilitated the expansion of the greater research community, but by lowering costs it has encouraged innovation and customizable design. The field of automated microscopy has continued to be a challenge in accessibility due the expense and inflexible, noninterchangeable stages. This paper presents a low-cost, open-source microscope 3-D stage. A RepRap 3-D printer was converted to an optical microscope equipped with a customized, 3-D printed holder for a USB microscope. Precision measurements were determined to have an average error of 10 μm at the maximum speed and 27 μm at the minimum recorded speed. Accuracy tests yielded an error of 0.15%. The machine is a true 3-D stage and thus able to operate with USB microscopes or conventional desktop microscopes. It is larger than all commercial alternatives, and is thus capable of high-depth images over unprecedented areas and complex geometries. The repeatability is below 2-D microscope stages, but testing shows that it is adequate for the majority of scientific applications. The open-source microscope stage costs less than 3-9% of the closest proprietary commercial stages. This extreme affordability vastly improves accessibility for 3-D microscopy throughout the world. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

Maker Cultures and the Prospects for Technological Action.

PubMed

Nascimento, Susana; Pólvora, Alexandre

2018-06-01

Supported by easier and cheaper access to tools and expanding communities, maker cultures are pointing towards the ideas of (almost) everyone designing, creating, producing and distributing renewed, new and improved products, machines, things or artefacts. A careful analysis of the assumptions and challenges of maker cultures emphasizes the relevance of what may be called technological action, that is, active and critical interventions regarding the purposes and applications of technologies within ordinary lives, thus countering the deterministic trends of current directions of technology. In such transformative potential, we will explore a set of elements what is and could be technological action through snapshots of maker cultures based on the empirical research conducted in three particular contexts: the Fab Lab Network, Maker Media core outputs and initiatives such as Maker Faires, and the Open Source Hardware Association (OSHWA). Elements such as control and empowerment through material engagement, openness and sharing, and social, cultural, political and ethical values of the common good in topics such as diversity, sustainability and transparency, are critically analysed.

JNDMS Task Authorization 2 Report

DTIC Science & Technology

2013-10-01

uses Barnyard to store alarms from all DREnet Snort sensors in a MySQL database. Barnyard is an open source tool designed to work with Snort to take...Technology ITI Information Technology Infrastructure J2EE Java 2 Enterprise Edition JAR Java Archive. This is an archive file format defined by Java ...standards. JDBC Java Database Connectivity JDW JNDMS Data Warehouse JNDMS Joint Network and Defence Management System JNDMS Joint Network Defence and

Mobile Computing Solutions for Effective and Efficient Generation and Dissemination of Tactical Operations Orders

DTIC Science & Technology

2017-06-01

and Joint doctrine, to establish a new paradigm for capturing, storing and transmitting the informational elements of an operations order. We...developed a working technology demonstrator that incorporates a new object-oriented data structure into existing open-source mobile technology to provide...instructor and practitioner in conjunction with Marine Corps and Joint doctrine, to establish a new paradigm for capturing, storing and transmitting the

Cheminformatics and the Semantic Web: adding value with linked data and enhanced provenance

PubMed Central

Frey, Jeremy G; Bird, Colin L

2013-01-01

Cheminformatics is evolving from being a field of study associated primarily with drug discovery into a discipline that embraces the distribution, management, access, and sharing of chemical data. The relationship with the related subject of bioinformatics is becoming stronger and better defined, owing to the influence of Semantic Web technologies, which enable researchers to integrate heterogeneous sources of chemical, biochemical, biological, and medical information. These developments depend on a range of factors: the principles of chemical identifiers and their role in relationships between chemical and biological entities; the importance of preserving provenance and properly curated metadata; and an understanding of the contribution that the Semantic Web can make at all stages of the research lifecycle. The movements toward open access, open source, and open collaboration all contribute to progress toward the goals of integration. PMID:24432050

The SCEC/UseIT Intern Program: Creating Open-Source Visualization Software Using Diverse Resources

NASA Astrophysics Data System (ADS)

Francoeur, H.; Callaghan, S.; Perry, S.; Jordan, T.

2004-12-01

The Southern California Earthquake Center undergraduate IT intern program (SCEC UseIT) conducts IT research to benefit collaborative earth science research. Through this program, interns have developed real-time, interactive, 3D visualization software using open-source tools. Dubbed LA3D, a distribution of this software is now in use by the seismic community. LA3D enables the user to interactively view Southern California datasets and models of importance to earthquake scientists, such as faults, earthquakes, fault blocks, digital elevation models, and seismic hazard maps. LA3D is now being extended to support visualizations anywhere on the planet. The new software, called SCEC-VIDEO (Virtual Interactive Display of Earth Objects), makes use of a modular, plugin-based software architecture which supports easy development and integration of new data sets. Currently SCEC-VIDEO is in beta testing, with a full open-source release slated for the future. Both LA3D and SCEC-VIDEO were developed using a wide variety of software technologies. These, which included relational databases, web services, software management technologies, and 3-D graphics in Java, were necessary to integrate the heterogeneous array of data sources which comprise our software. Currently the interns are working to integrate new technologies and larger data sets to increase software functionality and value. In addition, both LA3D and SCEC-VIDEO allow the user to script and create movies. Thus program interns with computer science backgrounds have been writing software while interns with other interests, such as cinema, geology, and education, have been making movies that have proved of great use in scientific talks, media interviews, and education. Thus, SCEC UseIT incorporates a wide variety of scientific and human resources to create products of value to the scientific and outreach communities. The program plans to continue with its interdisciplinary approach, increasing the relevance of the software and expanding its use in the scientific community.

Open-source approaches for the repurposing of existing or failed candidate drugs: learning from and applying the lessons across diseases

PubMed Central

Allarakhia, Minna

2013-01-01

Repurposing has the objective of targeting existing drugs and failed, abandoned, or yet-to-be-pursued clinical candidates to new disease areas. The open-source model permits for the sharing of data, resources, compounds, clinical molecules, small libraries, and screening platforms to cost-effectively advance old drugs and/or candidates into clinical re-development. Clearly, at the core of drug-repurposing activities is collaboration, in many cases progressing beyond the open sharing of resources, technology, and intellectual property, to the sharing of facilities and joint program development to foster drug-repurposing human-capacity development. A variety of initiatives under way for drug repurposing, including those targeting rare and neglected diseases, are discussed in this review and provide insight into the stakeholders engaged in drug-repurposing discovery, the models of collaboration used, the intellectual property-management policies crafted, and human capacity developed. In the case of neglected tropical diseases, it is suggested that the development of human capital be a central aspect of drug-repurposing programs. Open-source models can support human-capital development through collaborative data generation, open compound access, open and collaborative screening, preclinical and possibly clinical studies. Given the urgency of drug development for neglected tropical diseases, the review suggests elements from current repurposing programs be extended to the neglected tropical diseases arena. PMID:23966771

Open-source approaches for the repurposing of existing or failed candidate drugs: learning from and applying the lessons across diseases.

PubMed

Allarakhia, Minna

2013-01-01

Repurposing has the objective of targeting existing drugs and failed, abandoned, or yet-to-be-pursued clinical candidates to new disease areas. The open-source model permits for the sharing of data, resources, compounds, clinical molecules, small libraries, and screening platforms to cost-effectively advance old drugs and/or candidates into clinical re-development. Clearly, at the core of drug-repurposing activities is collaboration, in many cases progressing beyond the open sharing of resources, technology, and intellectual property, to the sharing of facilities and joint program development to foster drug-repurposing human-capacity development. A variety of initiatives under way for drug repurposing, including those targeting rare and neglected diseases, are discussed in this review and provide insight into the stakeholders engaged in drug-repurposing discovery, the models of collaboration used, the intellectual property-management policies crafted, and human capacity developed. In the case of neglected tropical diseases, it is suggested that the development of human capital be a central aspect of drug-repurposing programs. Open-source models can support human-capital development through collaborative data generation, open compound access, open and collaborative screening, preclinical and possibly clinical studies. Given the urgency of drug development for neglected tropical diseases, the review suggests elements from current repurposing programs be extended to the neglected tropical diseases arena.

Development of an open-source cloud-connected sensor-monitoring platform

USDA-ARS?s Scientific Manuscript database

Rapid advances in electronics and communications technologies offer continuously evolving options for sensing and awareness of the physical environment. Many of these advances are becoming increasingly available to “non-professionals,” that is, those without formal training or expertise in discipli...

An inexpensive open-source ultrasonic sensing system for monitoring fluid levels

USDA-ARS?s Scientific Manuscript database

Fluid levels are measured in a variety of agricultural applications, and are often measured manually, which can be time-consuming and labor-intensive. Rapid advances in electronic technologies have made a variety of inexpensive sensing, monitoring, and control capabilities available. A monitoring ...

Implementing Cooperative Behavior & Control Using Open Source Technology Across Heterogeneous Vehicles

DTIC Science & Technology

2015-03-26

8 January 2015]. [34] M. Pursifull, " DIY Drones," 1 August 2012. [Online]. Available: http://diydrones.com/group/arducopterusergroup/forum/topics...Camp Atterbury Range Safety course and has his range control safety card . 2. GENERAL MINIMIZING CONDITIONS The following general minimizing

An Overview of Audacity

ERIC Educational Resources Information Center

Thompson, Douglas Earl

2014-01-01

This article is an overview of the open source audio-editing and -recording program, Audacity. Key features are noted, along with significant features not included in the program. A number of music and music technology concepts are identified that could be taught and/or reinforced through using Audacity.

On the Application of Rapid Prototyping Technology for the Fabrication of Flapping Wings for Micro Air Vehicles

NASA Astrophysics Data System (ADS)

Kraemer, Kurtis Leigh

Micro air vehicles (MAV) are a class of small uninhabited aircraft with dimensions less than 15 cm (6 in) and mass less than 500g (1.1 lbs). The aim of this research was to develop a fast, accurate, low-cost, and repeatable fabrication process for flapping MAV wings. Through the use of the RepRap Mendel open-source fused-deposition modeling (FDM) rapid prototyping machine ("3-D printer"), various wing prototypes were designed and fabricated using a bio-inspired approach. Testing of the aerodynamic performance of both real locust wings and the 3-D printed wing prototypes was performed through axial spin testing. Bending stiffness measurements were also performed on the 3-D printed wings. Through the use of open-source rapid prototyping technology, a fast and low-cost fabrication process for flapping MAV wings has been developed, out of which further understanding of flapping wing design and fabrication has been gained.

Slicer Method Comparison Using Open-source 3D Printer

NASA Astrophysics Data System (ADS)

Ariffin, M. K. A. Mohd; Sukindar, N. A.; Baharudin, B. T. H. T.; Jaafar, C. N. A.; Ismail, M. I. S.

2018-01-01

Open-source 3D printer has been one of the popular choices in fabricating 3D models. This technology is easily accessible and low in cost. However, several studies have been made to improve the performance of this low-cost technology in term of the accuracy of the parts finish. This study is focusing on the selection of slicer mode between CuraEngine and Slic3r. The effect on this slicer has been observe in terms of accuracy and surface visualization. The result shows that if the accuracy is the top priority, CuraEngine is the better option to use as contribute more accuracy as well as less filament is needed compared to the Slice3r. Slice3r may be very useful for complicated parts such as hanging structure due to excessive material which act as support material. The study provides basic platform for the user to have an idea which option to be used in fabricating 3D model.

OpenMS - A platform for reproducible analysis of mass spectrometry data.

PubMed

Pfeuffer, Julianus; Sachsenberg, Timo; Alka, Oliver; Walzer, Mathias; Fillbrunn, Alexander; Nilse, Lars; Schilling, Oliver; Reinert, Knut; Kohlbacher, Oliver

2017-11-10

In recent years, several mass spectrometry-based omics technologies emerged to investigate qualitative and quantitative changes within thousands of biologically active components such as proteins, lipids and metabolites. The research enabled through these methods potentially contributes to the diagnosis and pathophysiology of human diseases as well as to the clarification of structures and interactions between biomolecules. Simultaneously, technological advances in the field of mass spectrometry leading to an ever increasing amount of data, demand high standards in efficiency, accuracy and reproducibility of potential analysis software. This article presents the current state and ongoing developments in OpenMS, a versatile open-source framework aimed at enabling reproducible analyses of high-throughput mass spectrometry data. It provides implementations of frequently occurring processing operations on MS data through a clean application programming interface in C++ and Python. A collection of 185 tools and ready-made workflows for typical MS-based experiments enable convenient analyses for non-developers and facilitate reproducible research without losing flexibility. OpenMS will continue to increase its ease of use for developers as well as users with improved continuous integration/deployment strategies, regular trainings with updated training materials and multiple sources of support. The active developer community ensures the incorporation of new features to support state of the art research. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Open Source Virtual Worlds and Low Cost Sensors for Physical Rehab of Patients with Chronic Diseases

NASA Astrophysics Data System (ADS)

Romero, Salvador J.; Fernandez-Luque, Luis; Sevillano, José L.; Vognild, Lars

For patients with chronic diseases, exercise is a key part of rehab to deal better with their illness. Some of them do rehabilitation at home with telemedicine systems. However, keeping to their exercising program is challenging and many abandon the rehabilitation. We postulate that information technologies for socializing and serious games can encourage patients to keep doing physical exercise and rehab. In this paper we present Virtual Valley, a low cost telemedicine system for home exercising, based on open source virtual worlds and utilizing popular low cost motion controllers (e.g. Wii Remote) and medical sensors. Virtual Valley allows patient to socialize, learn, and play group based serious games while exercising.

The EDRN knowledge environment: an open source, scalable informatics platform for biological sciences research

NASA Astrophysics Data System (ADS)

Crichton, Daniel; Mahabal, Ashish; Anton, Kristen; Cinquini, Luca; Colbert, Maureen; Djorgovski, S. George; Kincaid, Heather; Kelly, Sean; Liu, David

2017-05-01

We describe here the Early Detection Research Network (EDRN) for Cancer's knowledge environment. It is an open source platform built by NASA's Jet Propulsion Laboratory with contributions from the California Institute of Technology, and Giesel School of Medicine at Dartmouth. It uses tools like Apache OODT, Plone, and Solr, and borrows heavily from JPL's Planetary Data System's ontological infrastructure. It has accumulated data on hundreds of thousands of biospecemens and serves over 1300 registered users across the National Cancer Institute (NCI). The scalable computing infrastructure is built such that we are being able to reach out to other agencies, provide homogeneous access, and provide seamless analytics support and bioinformatics tools through community engagement.

Introduction to geospatial semantics and technology workshop handbook

USGS Publications Warehouse

Varanka, Dalia E.

2012-01-01

The workshop is a tutorial on introductory geospatial semantics with hands-on exercises using standard Web browsers. The workshop is divided into two sections, general semantics on the Web and specific examples of geospatial semantics using data from The National Map of the U.S. Geological Survey and the Open Ontology Repository. The general semantics section includes information and access to publicly available semantic archives. The specific session includes information on geospatial semantics with access to semantically enhanced data for hydrography, transportation, boundaries, and names. The Open Ontology Repository offers open-source ontologies for public use.

Development and evaluation of an open-source, low-cost distributed sensor network for environmental monitoring applications

NASA Astrophysics Data System (ADS)

Gunawardena, N.; Pardyjak, E. R.; Stoll, R.; Khadka, A.

2018-02-01

Over the last decade there has been a proliferation of low-cost sensor networks that enable highly distributed sensor deployments in environmental applications. The technology is easily accessible and rapidly advancing due to the use of open-source microcontrollers. While this trend is extremely exciting, and the technology provides unprecedented spatial coverage, these sensors and associated microcontroller systems have not been well evaluated in the literature. Given the large number of new deployments and proposed research efforts using these technologies, it is necessary to quantify the overall instrument and microcontroller performance for specific applications. In this paper, an Arduino-based weather station system is presented in detail. These low-cost energy-budget measurement stations, or LEMS, have now been deployed for continuous measurements as part of several different field campaigns, which are described herein. The LEMS are low-cost, flexible, and simple to maintain. In addition to presenting the technical details of the LEMS, its errors are quantified in laboratory and field settings. A simple artificial neural network-based radiation-error correction scheme is also presented. Finally, challenges and possible improvements to microcontroller-based atmospheric sensing systems are discussed.

MicMac GIS application: free open source

NASA Astrophysics Data System (ADS)

Duarte, L.; Moutinho, O.; Teodoro, A.

2016-10-01

The use of Remotely Piloted Aerial System (RPAS) for remote sensing applications is becoming more frequent as the technologies on on-board cameras and the platform itself are becoming a serious contender to satellite and airplane imagery. MicMac is a photogrammetric tool for image matching that can be used in different contexts. It is an open source software and it can be used as a command line or with a graphic interface (for each command). The main objective of this work was the integration of MicMac with QGIS, which is also an open source software, in order to create a new open source tool applied to photogrammetry/remote sensing. Python language was used to develop the application. This tool would be very useful in the manipulation and 3D modelling of a set of images. The main objective was to create a toolbar in QGIS with the basic functionalities with intuitive graphic interfaces. The toolbar is composed by three buttons: produce the points cloud, create the Digital Elevation Model (DEM) and produce the orthophoto of the study area. The application was tested considering 35 photos, a subset of images acquired by a RPAS in the Aguda beach area, Porto, Portugal. They were used in order to create a 3D terrain model and from this model obtain an orthophoto and the corresponding DEM. The code is open and can be modified according to the user requirements. This integration would be very useful in photogrammetry and remote sensing community combined with GIS capabilities.

An IoT-Based Solution for Monitoring a Fleet of Educational Buildings Focusing on Energy Efficiency.

PubMed

Amaxilatis, Dimitrios; Akrivopoulos, Orestis; Mylonas, Georgios; Chatzigiannakis, Ioannis

2017-10-10

Raising awareness among young people and changing their behaviour and habits concerning energy usage is key to achieving sustained energy saving. Additionally, young people are very sensitive to environmental protection so raising awareness among children is much easier than with any other group of citizens. This work examines ways to create an innovative Information & Communication Technologies (ICT) ecosystem (including web-based, mobile, social and sensing elements) tailored specifically for school environments, taking into account both the users (faculty, staff, students, parents) and school buildings, thus motivating and supporting young citizens' behavioural change to achieve greater energy efficiency. A mixture of open-source IoT hardware and proprietary platforms on the infrastructure level, are currently being utilized for monitoring a fleet of 18 educational buildings across 3 countries, comprising over 700 IoT monitoring points. Hereon presented is the system's high-level architecture, as well as several aspects of its implementation, related to the application domain of educational building monitoring and energy efficiency. The system is developed based on open-source technologies and services in order to make it capable of providing open IT-infrastructure and support from different commercial hardware/sensor vendors as well as open-source solutions. The system presented can be used to develop and offer new app-based solutions that can be used either for educational purposes or for managing the energy efficiency of the building. The system is replicable and adaptable to settings that may be different than the scenarios envisioned here (e.g., targeting different climate zones), different IT infrastructures and can be easily extended to accommodate integration with other systems. The overall performance of the system is evaluated in real-world environment in terms of scalability, responsiveness and simplicity.

An IoT-Based Solution for Monitoring a Fleet of Educational Buildings Focusing on Energy Efficiency

PubMed Central

Akrivopoulos, Orestis

2017-01-01

Raising awareness among young people and changing their behaviour and habits concerning energy usage is key to achieving sustained energy saving. Additionally, young people are very sensitive to environmental protection so raising awareness among children is much easier than with any other group of citizens. This work examines ways to create an innovative Information & Communication Technologies (ICT) ecosystem (including web-based, mobile, social and sensing elements) tailored specifically for school environments, taking into account both the users (faculty, staff, students, parents) and school buildings, thus motivating and supporting young citizens’ behavioural change to achieve greater energy efficiency. A mixture of open-source IoT hardware and proprietary platforms on the infrastructure level, are currently being utilized for monitoring a fleet of 18 educational buildings across 3 countries, comprising over 700 IoT monitoring points. Hereon presented is the system’s high-level architecture, as well as several aspects of its implementation, related to the application domain of educational building monitoring and energy efficiency. The system is developed based on open-source technologies and services in order to make it capable of providing open IT-infrastructure and support from different commercial hardware/sensor vendors as well as open-source solutions. The system presented can be used to develop and offer new app-based solutions that can be used either for educational purposes or for managing the energy efficiency of the building. The system is replicable and adaptable to settings that may be different than the scenarios envisioned here (e.g., targeting different climate zones), different IT infrastructures and can be easily extended to accommodate integration with other systems. The overall performance of the system is evaluated in real-world environment in terms of scalability, responsiveness and simplicity. PMID:28994719

A Flexible Method for Producing F.E.M. Analysis of Bone Using Open-Source Software

NASA Technical Reports Server (NTRS)

Boppana, Abhishektha; Sefcik, Ryan; Meyers, Jerry G.; Lewandowski, Beth E.

2016-01-01

This project, performed in support of the NASA GRC Space Academy summer program, sought to develop an open-source workflow methodology that segmented medical image data, created a 3D model from the segmented data, and prepared the model for finite-element analysis. In an initial step, a technological survey evaluated the performance of various existing open-source software that claim to perform these tasks. However, the survey concluded that no single software exhibited the wide array of functionality required for the potential NASA application in the area of bone, muscle and bio fluidic studies. As a result, development of a series of Python scripts provided the bridging mechanism to address the shortcomings of the available open source tools. The implementation of the VTK library provided the most quick and effective means of segmenting regions of interest from the medical images; it allowed for the export of a 3D model by using the marching cubes algorithm to build a surface mesh. To facilitate the development of the model domain from this extracted information required a surface mesh to be processed in the open-source software packages Blender and Gmsh. The Preview program of the FEBio suite proved to be sufficient for volume filling the model with an unstructured mesh and preparing boundaries specifications for finite element analysis. To fully allow FEM modeling, an in house developed Python script allowed assignment of material properties on an element by element basis by performing a weighted interpolation of voxel intensity of the parent medical image correlated to published information of image intensity to material properties, such as ash density. A graphical user interface combined the Python scripts and other software into a user friendly interface. The work using Python scripts provides a potential alternative to expensive commercial software and inadequate, limited open-source freeware programs for the creation of 3D computational models. More work will be needed to validate this approach in creating finite-element models.

Low cost and open source multi-fluorescence imaging system for teaching and research in biology and bioengineering.

PubMed

Nuñez, Isaac; Matute, Tamara; Herrera, Roberto; Keymer, Juan; Marzullo, Timothy; Rudge, Timothy; Federici, Fernán

2017-01-01

The advent of easy-to-use open source microcontrollers, off-the-shelf electronics and customizable manufacturing technologies has facilitated the development of inexpensive scientific devices and laboratory equipment. In this study, we describe an imaging system that integrates low-cost and open-source hardware, software and genetic resources. The multi-fluorescence imaging system consists of readily available 470 nm LEDs, a Raspberry Pi camera and a set of filters made with low cost acrylics. This device allows imaging in scales ranging from single colonies to entire plates. We developed a set of genetic components (e.g. promoters, coding sequences, terminators) and vectors following the standard framework of Golden Gate, which allowed the fabrication of genetic constructs in a combinatorial, low cost and robust manner. In order to provide simultaneous imaging of multiple wavelength signals, we screened a series of long stokes shift fluorescent proteins that could be combined with cyan/green fluorescent proteins. We found CyOFP1, mBeRFP and sfGFP to be the most compatible set for 3-channel fluorescent imaging. We developed open source Python code to operate the hardware to run time-lapse experiments with automated control of illumination and camera and a Python module to analyze data and extract meaningful biological information. To demonstrate the potential application of this integral system, we tested its performance on a diverse range of imaging assays often used in disciplines such as microbial ecology, microbiology and synthetic biology. We also assessed its potential use in a high school environment to teach biology, hardware design, optics, and programming. Together, these results demonstrate the successful integration of open source hardware, software, genetic resources and customizable manufacturing to obtain a powerful, low cost and robust system for education, scientific research and bioengineering. All the resources developed here are available under open source licenses.

Low cost and open source multi-fluorescence imaging system for teaching and research in biology and bioengineering

PubMed Central

Herrera, Roberto; Keymer, Juan; Marzullo, Timothy; Rudge, Timothy

2017-01-01

The advent of easy-to-use open source microcontrollers, off-the-shelf electronics and customizable manufacturing technologies has facilitated the development of inexpensive scientific devices and laboratory equipment. In this study, we describe an imaging system that integrates low-cost and open-source hardware, software and genetic resources. The multi-fluorescence imaging system consists of readily available 470 nm LEDs, a Raspberry Pi camera and a set of filters made with low cost acrylics. This device allows imaging in scales ranging from single colonies to entire plates. We developed a set of genetic components (e.g. promoters, coding sequences, terminators) and vectors following the standard framework of Golden Gate, which allowed the fabrication of genetic constructs in a combinatorial, low cost and robust manner. In order to provide simultaneous imaging of multiple wavelength signals, we screened a series of long stokes shift fluorescent proteins that could be combined with cyan/green fluorescent proteins. We found CyOFP1, mBeRFP and sfGFP to be the most compatible set for 3-channel fluorescent imaging. We developed open source Python code to operate the hardware to run time-lapse experiments with automated control of illumination and camera and a Python module to analyze data and extract meaningful biological information. To demonstrate the potential application of this integral system, we tested its performance on a diverse range of imaging assays often used in disciplines such as microbial ecology, microbiology and synthetic biology. We also assessed its potential use in a high school environment to teach biology, hardware design, optics, and programming. Together, these results demonstrate the successful integration of open source hardware, software, genetic resources and customizable manufacturing to obtain a powerful, low cost and robust system for education, scientific research and bioengineering. All the resources developed here are available under open source licenses. PMID:29140977

The Confluence of GIS, Cloud and Open Source, Enabling Big Raster Data Applications

NASA Astrophysics Data System (ADS)

Plesea, L.; Emmart, C. B.; Boller, R. A.; Becker, P.; Baynes, K.

2016-12-01

The rapid evolution of available cloud services is profoundly changing the way applications are being developed and used. Massive object stores, service scalability, continuous integration are some of the most important cloud technology advances that directly influence science applications and GIS. At the same time, more and more scientists are using GIS platforms in their day to day research. Yet with new opportunities there are always some challenges. Given the large amount of data commonly required in science applications, usually large raster datasets, connectivity is one of the biggest problems. Connectivity has two aspects, one being the limited bandwidth and latency of the communication link due to the geographical location of the resources, the other one being the interoperability and intrinsic efficiency of the interface protocol used to connect. NASA and Esri are actively helping each other and collaborating on a few open source projects, aiming to provide some of the core technology components to directly address the GIS enabled data connectivity problems. Last year Esri contributed LERC, a very fast and efficient compression algorithm to the GDAL/MRF format, which itself is a NASA/Esri collaboration project. The MRF raster format has some cloud aware features that make it possible to build high performance web services on cloud platforms, as some of the Esri projects demonstrate. Currently, another NASA open source project, the high performance OnEarth WMTS server is being refactored and enhanced to better integrate with MRF, GDAL and Esri software. Taken together, the GDAL, MRF and OnEarth form the core of an open source CloudGIS toolkit that is already showing results. Since it is well integrated with GDAL, which is the most common interoperability component of GIS applications, this approach should improve the connectivity and performance of many science and GIS applications in the cloud.

The Core Flight System (cFS) Community: Providing Low Cost Solutions for Small Spacecraft

NASA Technical Reports Server (NTRS)

McComas, David; Wilmot, Jonathan; Cudmore, Alan

2016-01-01

In February 2015 the NASA Goddard Space Flight Center (GSFC) completed the open source release of the entire Core Flight Software (cFS) suite. After the open source release a multi-NASA center Configuration Control Board (CCB) was established that has managed multiple cFS product releases. The cFS was developed and is being maintained in compliance with the NASA Class B software development process requirements and the open source release includes all Class B artifacts. The cFS is currently running on three operational science spacecraft and is being used on multiple spacecraft and instrument development efforts. While the cFS itself is a viable flight software (FSW) solution, we have discovered that the cFS community is a continuous source of innovation and growth that provides products and tools that serve the entire FSW lifecycle and future mission needs. This paper summarizes the current state of the cFS community, the key FSW technologies being pursued, the development/verification tools and opportunities for the small satellite community to become engaged. The cFS is a proven high quality and cost-effective solution for small satellites with constrained budgets.

Delivering Unidata Technology via the Cloud

NASA Astrophysics Data System (ADS)

Fisher, Ward; Oxelson Ganter, Jennifer

2016-04-01

Over the last two years, Docker has emerged as the clear leader in open-source containerization. Containerization technology provides a means by which software can be pre-configured and packaged into a single unit, i.e. a container. This container can then be easily deployed either on local or remote systems. Containerization is particularly advantageous when moving software into the cloud, as it simplifies the process. Unidata is adopting containerization as part of our commitment to migrate our technologies to the cloud. We are using a two-pronged approach in this endeavor. In addition to migrating our data-portal services to a cloud environment, we are also exploring new and novel ways to use cloud-specific technology to serve our community. This effort has resulted in several new cloud/Docker-specific projects at Unidata: "CloudStream," "CloudIDV," and "CloudControl." CloudStream is a docker-based technology stack for bringing legacy desktop software to new computing environments, without the need to invest significant engineering/development resources. CloudStream helps make it easier to run existing software in a cloud environment via a technology called "Application Streaming." CloudIDV is a CloudStream-based implementation of the Unidata Integrated Data Viewer (IDV). CloudIDV serves as a practical example of application streaming, and demonstrates how traditional software can be easily accessed and controlled via a web browser. Finally, CloudControl is a web-based dashboard which provides administrative controls for running docker-based technologies in the cloud, as well as providing user management. In this work we will give an overview of these three open-source technologies and the value they offer to our community.

World Wind: NASA's Virtual Globe

NASA Astrophysics Data System (ADS)

Hogan, P.

2007-12-01

Virtual globes have set the standard for information exchange. Once you've experienced the visually rich and highly compelling nature of data delivered via virtual globes with their highly engaging context of 3D, it's hard to go back to a flat 2D world. Just as the sawbones of not-too-long-ago have given way to sophisticated surgical operating theater, today's medium for information exchange is just beginning to leap from the staid chalkboards and remote libraries to fingertip navigable 3D worlds. How we harness this technology to serve a world inundated with information will describe the quality of our future. Our instincts for discovery and entertainment urge us on. There's so much we could know if the world's knowledge was presented to us in its natural context. Virtual globes are almost magical in their ability to reveal natural wonders. Anyone flying along a chain of volcanoes, a mid-ocean ridge or deep ocean trench, while simultaneously seeing the different depths to the history of earthquakes in those areas, will be delighted to sense Earth's dynamic nature in a way that would otherwise take several paragraphs of "boring" text. The sophisticated concepts related to global climate change would be far more comprehensible when experienced via a virtual globe. There is a large universe of public and private geospatial data sets that virtual globes can bring to light. The benefit derived from access to this data within virtual globes represents a significant return on investment for government, industry, the general public, and especially in the realm of education. Data access remains a key issue. Just as the highway infrastructure allows unimpeded access from point A to point B, an open standards-based infrastructure for data access allows virtual globes to exchange data in the most efficient manner possible. This data can be either free or proprietary. The Open Geospatial Consortium is providing the leadership necessary for this open standards-based data access infrastructure. The open-source community plays a crucial role in advancing virtual globe technology. This world community identifies, tracks and resolves technical problems, suggests new features and source code modifications, and often provides high-resolution data sets and other types of user-generated content, all while extending the functionality of virtual globe technology. NASA World Wind is one example of open source virtual globe technology that provides the world with the ability to build any desired functionality and make any desired data accessible.

Limitless Horizons. Careers in Aerospace

NASA Technical Reports Server (NTRS)

Lewis, M. H.

1980-01-01

A manual is presented for use by counselors in career guidance programs. Pertinent information is provided on choices open in aerospace sciences, engineering, and technology. Accredited institutions awarding degrees in pertinent areas are listed as well as additional sources of aerospace career information. NASA's role and fields of interest are emphasized.

Participatory Development Strategies for Open Source Content Management Systems

ERIC Educational Resources Information Center

Panke, Stefanie; Kohls, Christian; Gaiser, Birgit

2007-01-01

Stefanie Panke, Christian Kohls, and Birgit Gaiser maintain that effective strategies for the development of educational technology can only arise when the process is understood, analyzed, and assessed as a social phenomenon, and when the experience of users is integrated within the design process. To illustrate, they describe the early…

Factors Influencing F/OSS Cloud Computing Software Product Success: A Quantitative Study

ERIC Educational Resources Information Center

Letort, D. Brian

2012-01-01

Cloud Computing introduces a new business operational model that allows an organization to shift information technology consumption from traditional capital expenditure to operational expenditure. This shift introduces challenges from both the adoption and creation vantage. This study evaluates factors that influence Free/Open Source Software…

Information Technology Wants to Be Free

ERIC Educational Resources Information Center

Poritz, Jonathan A.

2012-01-01

It makes sense for college and university faculty to ally with the free and open-source software community. They share common values. A marvelous additional benefit is that free software on campuses would significantly advance pedagogy and scholarship, increase efficiency, and save money. Only unquestioning obedience to market fundamentalism--or…

Frameworks Coordinate Scientific Data Management

NASA Technical Reports Server (NTRS)

2012-01-01

Jet Propulsion Laboratory computer scientists developed a unique software framework to help NASA manage its massive amounts of science data. Through a partnership with the Apache Software Foundation of Forest Hill, Maryland, the technology is now available as an open-source solution and is in use by cancer researchers and pediatric hospitals.

The Scenario Analysis Tool Suite: A User’s Guide

DTIC Science & Technology

2009-01-01

be exported at any stage and continued manually. The free, open-source integrated development environment (IDE) NetBeans [14] was used in the creation...and Technology Organisation, Australia. 14. Sun Microsystems & CollabNet (2008) NetBeans IDE 6.0, http://wwwnetbeans.org. 15. Tri, N., Boswell, S

Integrating an Awareness of Selfhood and Society into Virtual Learning

ERIC Educational Resources Information Center

Stricker, Andrew, Ed.; Calongne, Cynthia, Ed.; Truman, Barbara, Ed.; Arenas, Fil, Ed.

2017-01-01

Recent technological advances have opened new platforms for learning and teaching. By utilizing virtual spaces, more educational opportunities are created for students who cannot attend a physical classroom environment. "Integrating an Awareness of Selfhood and Society into Virtual Learning" is a pivotal reference source that discusses…

Electronic Health Record Application Support Service Enablers.

PubMed

Neofytou, M S; Neokleous, K; Aristodemou, A; Constantinou, I; Antoniou, Z; Schiza, E C; Pattichis, C S; Schizas, C N

2015-08-01

There is a huge need for open source software solutions in the healthcare domain, given the flexibility, interoperability and resource savings characteristics they offer. In this context, this paper presents the development of three open source libraries - Specific Enablers (SEs) for eHealth applications that were developed under the European project titled "Future Internet Social and Technological Alignment Research" (FI-STAR) funded under the "Future Internet Public Private Partnership" (FI-PPP) program. The three SEs developed under the Electronic Health Record Application Support Service Enablers (EHR-EN) correspond to: a) an Electronic Health Record enabler (EHR SE), b) a patient summary enabler based on the EU project "European patient Summary Open Source services" (epSOS SE) supporting patient mobility and the offering of interoperable services, and c) a Picture Archiving and Communications System (PACS) enabler (PACS SE) based on the dcm4che open source system for the support of medical imaging functionality. The EHR SE follows the HL7 Clinical Document Architecture (CDA) V2.0 and supports the Integrating the Healthcare Enterprise (IHE) profiles (recently awarded in Connectathon 2015). These three FI-STAR platform enablers are designed to facilitate the deployment of innovative applications and value added services in the health care sector. They can be downloaded from the FI-STAR cataloque website. Work in progress focuses in the validation and evaluation scenarios for the proving and demonstration of the usability, applicability and adaptability of the proposed enablers.

Computer Applications in Health Science Education.

PubMed

Juanes, Juan A; Ruisoto, Pablo

2015-09-01

In recent years, computer application development has experienced exponential growth, not only in the number of publications but also in the scope or contexts that have benefited from its use. In health science training, and medicine specifically, the gradual incorporation of technological developments has transformed the teaching and learning process, resulting in true "educational technology". The goal of this paper is to review the main features involved in these applications and highlight the main lines of research for the future. The results of peer reviewed literature published recently indicate the following features shared by the key technological developments in the field of health science education: first, development of simulation and visualization systems for a more complete and realistic representation of learning material over traditional paper format; second, portability and versatility of the applications, adapted for an increasing number of devices and operative systems; third, increasing focus on open source applications such as Massive Open Online Course (MOOC).

SNPConvert: SNP Array Standardization and Integration in Livestock Species.

PubMed

Nicolazzi, Ezequiel Luis; Marras, Gabriele; Stella, Alessandra

2016-06-09

One of the main advantages of single nucleotide polymorphism (SNP) array technology is providing genotype calls for a specific number of SNP markers at a relatively low cost. Since its first application in animal genetics, the number of available SNP arrays for each species has been constantly increasing. However, conversely to that observed in whole genome sequence data analysis, SNP array data does not have a common set of file formats or coding conventions for allele calling. Therefore, the standardization and integration of SNP array data from multiple sources have become an obstacle, especially for users with basic or no programming skills. Here, we describe the difficulties related to handling SNP array data, focusing on file formats, SNP allele coding, and mapping. We also present SNPConvert suite, a multi-platform, open-source, and user-friendly set of tools to overcome these issues. This tool, which can be integrated with open-source and open-access tools already available, is a first step towards an integrated system to standardize and integrate any type of raw SNP array data. The tool is available at: https://github. com/nicolazzie/SNPConvert.git.

Design and implementation of an open source indexing solution for a large set of radiological reports and images.

PubMed

Voet, T; Devolder, P; Pynoo, B; Vercruysse, J; Duyck, P

2007-11-01

This paper hopes to share the insights we experienced during designing, building, and running an indexing solution for a large set of radiological reports and images in a production environment for more than 3 years. Several technical challenges were encountered and solved in the course of this project. One hundred four million words in 1.8 million radiological reports from 1989 to the present were indexed and became instantaneously searchable in a user-friendly fashion; the median query duration is only 31 ms. Currently, our highly tuned index holds 332,088 unique words in four languages. The indexing system is feature-rich and language-independent and allows for making complex queries. For research and training purposes it certainly is a valuable and convenient addition to our radiology informatics toolbox. Extended use of open-source technology dramatically reduced both implementation time and cost. All software we developed related to the indexing project has been made available to the open-source community covered by an unrestricted Berkeley Software Distribution-style license.

Quality Attribute-Guided Evaluation of NoSQL Databases: A Case Study

DTIC Science & Technology

2015-01-16

evaluations of NoSQL databases specifically, and big data systems in general, that have become apparent during our study. Keywords—NoSQL, distributed...technology, namely that of big data , software systems [1]. At the heart of big data systems are a collection of database technologies that are more...born organizations such as Google and Amazon [3][4], along with those of numerous other big data innovators, have created a variety of open source and

Improving Software Sustainability: Lessons Learned from Profiles in Science.

PubMed

Gallagher, Marie E

2013-01-01

The Profiles in Science® digital library features digitized surrogates of historical items selected from the archival collections of the U.S. National Library of Medicine as well as collaborating institutions. In addition, it contains a database of descriptive, technical and administrative metadata. It also contains various software components that allow creation of the metadata, management of the digital items, and access to the items and metadata through the Profiles in Science Web site [1]. The choices made building the digital library were designed to maximize the sustainability and long-term survival of all of the components of the digital library [2]. For example, selecting standard and open digital file formats rather than proprietary formats increases the sustainability of the digital files [3]. Correspondingly, using non-proprietary software may improve the sustainability of the software--either through in-house expertise or through the open source community. Limiting our digital library software exclusively to open source software or to software developed in-house has not been feasible. For example, we have used proprietary operating systems, scanning software, a search engine, and office productivity software. We did this when either lack of essential capabilities or the cost-benefit trade-off favored using proprietary software. We also did so knowing that in the future we would need to replace or upgrade some of our proprietary software, analogous to migrating from an obsolete digital file format to a new format as the technological landscape changes. Since our digital library's start in 1998, all of its software has been upgraded or replaced, but the digitized items have not yet required migration to other formats. Technological changes that compelled us to replace proprietary software included the cost of product licensing, product support, incompatibility with other software, prohibited use due to evolving security policies, and product abandonment. Sometimes these changes happen on short notice, so we continually monitor our library's software for signs of endangerment. We have attempted to replace proprietary software with suitable in-house or open source software. When the replacement involves a standalone piece of software with a nearly equivalent version, such as replacing a commercial HTTP server with an open source HTTP server, the replacement is straightforward. Recently we replaced software that functioned not only as our search engine but also as the backbone of the architecture of our Web site. In this paper, we describe the lessons learned and the pros and cons of replacing this software with open source software.

VIVO Open Source Software: Connecting Facilities to Promote Discovery and Further Research.

NASA Astrophysics Data System (ADS)

Gross, M. B.; Rowan, L. R.; Mayernik, M. S.; Daniels, M. D.; Stott, D.; Allison, J.; Maull, K. E.; Krafft, D. B.; Khan, H.

2016-12-01

EarthCollab (http://earthcube.org/group/earthcollab), a National Science Foundation (NSF) EarthCube Building Block project, has adapted an open source semantic web application, VIVO, for use within the earth science domain. EarthCollab is a partnership between UNAVCO, an NSF facility supporting research through geodetic services, the Earth Observing Laboratory (EOL) at the National Center for Atmospheric Research (NCAR), and Cornell University, where VIVO was created to highlight the scholarly output of researchers at universities. Two public sites have been released: Connect UNAVCO (connect.unavco.org) and Arctic Data Connects (vivo.eol.ucar.edu). The core VIVO software and ontology have been extended to work better with concepts necessary for capturing work within UNAVCO's and EOL's province such as principal investigators for continuous GPS/GNSS stations at UNAVCO and keywords describing cruise datasets at EOL. The sites increase discoverability of large and diverse data archives by linking data with people, research, and field projects. Disambiguation is a major challenge when using VIVO and open data when "anyone can say anything about anything." Concepts and controlled vocabularies help to build consistent and easily searchable connections within VIVO. We use aspects of subject heading services such as FAST and LOC, as well as AGU and GSA fields of research and subject areas to reveal connections, especially with VIVO instances at other institutions. VIVO works effectively with persistent IDs and the projects strive to utilize publication and data DOIs, ORCIDs for people, and ISNI and GRID for organizations. ORCID, an open source project, is very useful for disambiguation and unlike other identifier systems for people developed by publishers, makes public data available via an API. VIVO utilizes Solr and Freemarker, which are open source search engine and templating technologies, respectively. Additionally, a handful of popular open source libraries and applications are being used in the project such as D3.js, jQuery, Leaflet, and Elasticsearch. Our implementation of these open source projects within VIVO is available for adaptation by other institutions using VIVO via GitHub (git.io/vG9AJ).

Innovation in engineering education through computer assisted learning and virtual university model

NASA Astrophysics Data System (ADS)

Raicu, A.; Raicu, G.

2015-11-01

The paper presents the most important aspects of innovation in Engineering Education using Computer Assisted Learning. The authors propose to increase the quality of Engineering Education programs of study at European standards. The use of computer assisted learning methodologies in all studies is becoming an important resource in Higher Education. We intend to improve the concept of e-Learning using virtual terminals, online support and assisting special training through live seminars and interactive labs to develop a virtual university model. We intend to encourage computer assisted learning and innovation as sources of competitive advantage, to permit vision and learning analysis, identifies new sources of technology and ideas. Our work is based on our university datasets collected during last fifteen years using several e-Learning systems. In Constanta Maritime University (CMU), using eLearning and Knowledge Management Services (KMS) is very important and we apply it effectively to achieve strategic objectives, such as collaboration, sharing and good practice. We have experience in this field since 2000 year using Moodle as KMS in our university. The term KMS can be associated to Open Source Software, Open Standards, Open Protocols and Open Knowledge licenses, initiatives and policies. In CMU Virtual Campus we have today over 12500 active users. Another experience of the authors is the implementation of MariTrainer Wiki educational platform based on Dokeos and DekiWiki under MARICOMP and MEP Leonardo da Vinci Project. We'll also present in this paper a case study under EU funded project POSDRU, where the authors implemented other educational platform in Technological High Schools from Romania used over 1000 teachers. Based on large datasets the study tries to improve the concept of e-Learning teaching using the revolutionary technologies. The new concept present in this paper is that the teaching and learning will be interactive and live. The new and modern techniques are the flexible learning courses, the production of learning demonstrators and testing. All the information from the virtual educational platform remain open space, communication between participants and continued after graduation, so we can talk about creating and maintaining a community of graduates, a partnership with them. Every European University must have a department which aims to provide computer assisted learning using knowledge creation through learning, capture and explication, sharing and collaborative communication, access, use and reuse and knowledge archiving.

Crowded: a crowd-sourced perspective of events as they happen

NASA Astrophysics Data System (ADS)

Brantingham, Richard; Hossain, Aleem

2013-05-01

`Crowded' is a web-based application developed by the Defence Science & Technology Laboratory (Dstl) that collates imagery of a particular location from a variety of media sources to provide an operator with real-time situational awareness. Emergency services and other relevant agencies have detected or become aware of an event - a riot or an explosion, for instance - and its location or text associated with it. The ubiquity of mobile devices allows people to collect and upload media of the incident to the Internet, in real time. Crowded manages the interactions with online sources of media: Flickr; Instagram; YouTube; Twitter; and Transport for London traffic cameras, to retrieve imagery that is being uploaded at that point in time. In doing so, it aims to provide human operators with near-instantaneous `eyes-on' from a variety of different perspectives. The first instantiation of Crowded was implemented as a series of integrated web-services with the aim of rapidly understanding whether the approach was viable. In doing so, it demonstrated how non-traditional, open sources can be used to provide a richer current intelligence picture than can be obtained alone from classified sources. The development of Crowded also explored how open source technology and cloud-based services can be used in the modern intelligence and security environment to provide a multi-agency Common Operating Picture to help achieve a co-ordinated response. The lessons learned in building the prototype are currently being used to design and develop a second version, and identify options and priorities for future development.

Common Approach to Geoprocessing of Uav Data across Application Domains

NASA Astrophysics Data System (ADS)

Percivall, G. S.; Reichardt, M.; Taylor, T.

2015-08-01

UAVs are a disruptive technology bringing new geographic data and information to many application domains. UASs are similar to other geographic imagery systems so existing frameworks are applicable. But the diversity of UAVs as platforms along with the diversity of available sensors are presenting challenges in the processing and creation of geospatial products. Efficient processing and dissemination of the data is achieved using software and systems that implement open standards. The challenges identified point to the need for use of existing standards and extending standards. Results from the use of the OGC Sensor Web Enablement set of standards are presented. Next steps in the progress of UAVs and UASs may follow the path of open data, open source and open standards.

Development of an open technology sensor suite for assisted living: a student-led research project.

PubMed

Manton, James D; Hughes, Josephine A E; Bonner, Oliver; Amjad, Omar A; Mair, Philip; Miele, Isabella; Wang, Tiesheng; Levdik, Vitaly; Hall, Richard D; Baekelandt, Géraldine; Vasconcellos, Fernando da Cruz; Hadeler, Oliver; Hutter, Tanya; Kaminski, Clemens F

2016-08-06

Many countries have a rapidly ageing population, placing strain on health services and creating a growing market for assistive technology for older people. We have, through a student-led, 12-week project for 10 students from a variety of science and engineering backgrounds, developed an integrated sensor system to enable older people, or those at risk, to live independently in their own homes for longer, while providing reassurance for their family and carers. We provide details on the design procedure and performance of our sensor system and the management and execution of a short-term, student-led research project. Detailed information on the design and use of our devices, including a door sensor, power monitor, fall detector, general in-house sensor unit and easy-to-use location-aware communications device, is given, with our open designs being contrasted with closed proprietary systems. A case study is presented for the use of our devices in a real-world context, along with a comparison with commercially available systems. We discuss how the system could lead to improvements in the quality of life of older users and increase the effectiveness of their associated care network. We reflect on how recent developments in open source technology and rapid prototyping increase the scope and potential for the development of powerful sensor systems and, finally, conclude with a student perspective on this team effort and highlight learning outcomes, arguing that open technologies will revolutionize the way in which technology will be deployed in academic research in the future.

Development of an open technology sensor suite for assisted living: a student-led research project

PubMed Central

Hughes, Josephine A. E.; Bonner, Oliver; Amjad, Omar A.; Levdik, Vitaly; Hall, Richard D.; Baekelandt, Géraldine; Hutter, Tanya; Kaminski, Clemens F.

2016-01-01

Many countries have a rapidly ageing population, placing strain on health services and creating a growing market for assistive technology for older people. We have, through a student-led, 12-week project for 10 students from a variety of science and engineering backgrounds, developed an integrated sensor system to enable older people, or those at risk, to live independently in their own homes for longer, while providing reassurance for their family and carers. We provide details on the design procedure and performance of our sensor system and the management and execution of a short-term, student-led research project. Detailed information on the design and use of our devices, including a door sensor, power monitor, fall detector, general in-house sensor unit and easy-to-use location-aware communications device, is given, with our open designs being contrasted with closed proprietary systems. A case study is presented for the use of our devices in a real-world context, along with a comparison with commercially available systems. We discuss how the system could lead to improvements in the quality of life of older users and increase the effectiveness of their associated care network. We reflect on how recent developments in open source technology and rapid prototyping increase the scope and potential for the development of powerful sensor systems and, finally, conclude with a student perspective on this team effort and highlight learning outcomes, arguing that open technologies will revolutionize the way in which technology will be deployed in academic research in the future. PMID:27499844

Recent Accomplishments in Laser-Photovoltaic Wireless Power Transmission

NASA Technical Reports Server (NTRS)

Fikes, John C.; Henley, Mark W.; Mankins, John C.; Howell, Joe T.; Fork, Richard L.; Cole, Spencer T.; Skinner, Mark

2003-01-01

Wireless power transmission can be accomplished over long distances using laser power sources and photovoltaic receivers. Recent research at AMOS has improved our understanding of the use of this technology for practical applications. Research by NASA, Boeing, the University of Alabama-Huntsville, the University of Colorado, Harvey Mudd College, and the Naval Postgraduate School has tested various commercial lasers and photovoltaic receiver configurations. Lasers used in testing have included gaseous argon and krypton, solid-state diodes, and fiber optic sources, at wavelengths ranging from the visible to the near infra-red. A variety of Silicon and Gallium Arsenide photovoltaic have been tested with these sources. Safe operating procedures have been established, and initial tests have been conducted in the open air at AMOS facilities. This research is progressing toward longer distance ground demonstrations of the technology and practical near-term space demonstrations.

OnEarth: An Open Source Solution for Efficiently Serving High-Resolution Mapped Image Products

NASA Astrophysics Data System (ADS)

Thompson, C. K.; Plesea, L.; Hall, J. R.; Roberts, J. T.; Cechini, M. F.; Schmaltz, J. E.; Alarcon, C.; Huang, T.; McGann, J. M.; Chang, G.; Boller, R. A.; Ilavajhala, S.; Murphy, K. J.; Bingham, A. W.

2013-12-01

This presentation introduces OnEarth, a server side software package originally developed at the Jet Propulsion Laboratory (JPL), that facilitates network-based, minimum-latency geolocated image access independent of image size or spatial resolution. The key component in this package is the Meta Raster Format (MRF), a specialized raster file extension to the Geospatial Data Abstraction Library (GDAL) consisting of an internal indexed pyramid of image tiles. Imagery to be served is converted to the MRF format and made accessible online via an expandable set of server modules handling requests in several common protocols, including the Open Geospatial Consortium (OGC) compliant Web Map Tile Service (WMTS) as well as Tiled WMS and Keyhole Markup Language (KML). OnEarth has recently transitioned to open source status and is maintained and actively developed as part of GIBS (Global Imagery Browse Services), a collaborative project between JPL and Goddard Space Flight Center (GSFC). The primary function of GIBS is to enhance and streamline the data discovery process and to support near real-time (NRT) applications via the expeditious ingestion and serving of full-resolution imagery representing science products from across the NASA Earth Science spectrum. Open source software solutions are leveraged where possible in order to utilize existing available technologies, reduce development time, and enlist wider community participation. We will discuss some of the factors and decision points in transitioning OnEarth to a suitable open source paradigm, including repository and licensing agreement decision points, institutional hurdles, and perceived benefits. We will also provide examples illustrating how OnEarth is integrated within GIBS and other applications.

Open-Source Electronic Health Record Systems for Low-Resource Settings: Systematic Review

PubMed Central

Zolfo, Maria; Diro, Ermias

2017-01-01

Background Despite the great impact of information and communication technologies on clinical practice and on the quality of health services, this trend has been almost exclusive to developed countries, whereas countries with poor resources suffer from many economic and social issues that have hindered the real benefits of electronic health (eHealth) tools. As a component of eHealth systems, electronic health records (EHRs) play a fundamental role in patient management and effective medical care services. Thus, the adoption of EHRs in regions with a lack of infrastructure, untrained staff, and ill-equipped health care providers is an important task. However, the main barrier to adopting EHR software in low- and middle-income countries is the cost of its purchase and maintenance, which highlights the open-source approach as a good solution for these underserved areas. Objective The aim of this study was to conduct a systematic review of open-source EHR systems based on the requirements and limitations of low-resource settings. Methods First, we reviewed existing literature on the comparison of available open-source solutions. In close collaboration with the University of Gondar Hospital, Ethiopia, we identified common limitations in poor resource environments and also the main requirements that EHRs should support. Then, we extensively evaluated the current open-source EHR solutions, discussing their strengths and weaknesses, and their appropriateness to fulfill a predefined set of features relevant for low-resource settings. Results The evaluation methodology allowed assessment of several key aspects of available solutions that are as follows: (1) integrated applications, (2) configurable reports, (3) custom reports, (4) custom forms, (5) interoperability, (6) coding systems, (7) authentication methods, (8) patient portal, (9) access control model, (10) cryptographic features, (11) flexible data model, (12) offline support, (13) native client, (14) Web client,(15) other clients, (16) code-based language, (17) development activity, (18) modularity, (19) user interface, (20) community support, and (21) customization. The quality of each feature is discussed for each of the evaluated solutions and a final comparison is presented. Conclusions There is a clear demand for open-source, reliable, and flexible EHR systems in low-resource settings. In this study, we have evaluated and compared five open-source EHR systems following a multidimensional methodology that can provide informed recommendations to other implementers, developers, and health care professionals. We hope that the results of this comparison can guide decision making when needing to adopt, install, and maintain an open-source EHR solution in low-resource settings. PMID:29133283

A Semantic Web Management Model for Integrative Biomedical Informatics

PubMed Central

Deus, Helena F.; Stanislaus, Romesh; Veiga, Diogo F.; Behrens, Carmen; Wistuba, Ignacio I.; Minna, John D.; Garner, Harold R.; Swisher, Stephen G.; Roth, Jack A.; Correa, Arlene M.; Broom, Bradley; Coombes, Kevin; Chang, Allen; Vogel, Lynn H.; Almeida, Jonas S.

2008-01-01

Background Data, data everywhere. The diversity and magnitude of the data generated in the Life Sciences defies automated articulation among complementary efforts. The additional need in this field for managing property and access permissions compounds the difficulty very significantly. This is particularly the case when the integration involves multiple domains and disciplines, even more so when it includes clinical and high throughput molecular data. Methodology/Principal Findings The emergence of Semantic Web technologies brings the promise of meaningful interoperation between data and analysis resources. In this report we identify a core model for biomedical Knowledge Engineering applications and demonstrate how this new technology can be used to weave a management model where multiple intertwined data structures can be hosted and managed by multiple authorities in a distributed management infrastructure. Specifically, the demonstration is performed by linking data sources associated with the Lung Cancer SPORE awarded to The University of Texas MDAnderson Cancer Center at Houston and the Southwestern Medical Center at Dallas. A software prototype, available with open source at www.s3db.org, was developed and its proposed design has been made publicly available as an open source instrument for shared, distributed data management. Conclusions/Significance The Semantic Web technologies have the potential to addresses the need for distributed and evolvable representations that are critical for systems Biology and translational biomedical research. As this technology is incorporated into application development we can expect that both general purpose productivity software and domain specific software installed on our personal computers will become increasingly integrated with the relevant remote resources. In this scenario, the acquisition of a new dataset should automatically trigger the delegation of its analysis. PMID:18698353

Moore's law realities for recording systems and memory storage components: HDD, tape, NAND, and optical

NASA Astrophysics Data System (ADS)

Fontana, Robert E.; Decad, Gary M.

2018-05-01

This paper describes trends in the storage technologies associated with Linear Tape Open (LTO) Tape cartridges, hard disk drives (HDD), and NAND Flash based storage devices including solid-state drives (SSD). This technology discussion centers on the relationship between cost/bit and bit density and, specifically on how the Moore's Law perception that areal density doubling and cost/bit halving every two years is no longer being achieved for storage based components. This observation and a Moore's Law Discussion are demonstrated with data from 9-year storage technology trends, assembled from publically available industry reporting sources.

HELI-DEM portal for geo-processing services

NASA Astrophysics Data System (ADS)

Cannata, Massimiliano; Antonovic, Milan; Molinari, Monia

2014-05-01

HELI-DEM (Helvetia-Italy Digital Elevation Model) is a project developed in the framework of Italy/Switzerland Operational Programme for Trans-frontier Cooperation 2007-2013 whose major aim is to create a unified digital terrain model that includes the alpine and sub-alpine areas between Italy and Switzerland. The partners of the project are: Lombardy Region, Piedmont Region, Polytechnic of Milan, Polytechnic of Turin and Fondazione Politecnico from Italy; Institute of Earth Sciences (SUPSI) from Switzerland. The digital terrain model has been produced by integrating and validating the different elevation data available for the areas of interest, characterized by different reference frame, resolutions and accuracies: DHM at 25 m resolution from Swisstopo, DTM at 20 m resolution from Lombardy Region, DTM at 5 m resolution from Piedmont Region and DTM LiDAR PST-A at about 1 m resolution, that covers the main river bed areas and is produced by the Italian Ministry of the Environment. Further results of the project are: the generation of a unique Italian Swiss geoid with an accuracy of few centimeters (Gilardoni et al. 2012); the establishment of a GNSS permanent network, prototype of a transnational positioning service; the development of a geo-portal, entirely based on open source technologies and open standards, which provides the cross-border DTM and offers some capabilities of analysis and processing through the Internet. With this talk, the authors want to present the main steps of the project with a focus on the HELI-DEM geo-portal development carried out by the Institute of Earth Sciences, which is the access point to the DTM outputted from the project. The portal, accessible at http://geoservice.ist.supsi.ch/helidem, is a demonstration of open source technologies combined for providing access to geospatial functionalities to wide non GIS expert public. In fact, the system is entirely developed using only Open Standards and Free and Open Source Software (FOSS) both on the server side (services) and on the client side (interface). In addition to self developed code the system relies mainly on teh software GRASS 7 [1], ZOO-project [2], Geoserver [3] and OpenLayers [4] and the standards WMS [5], WCS [6] and WPS [7]. At the time of writing, the portal offers features like profiling, contour extraction, watershed delineation and analysis, derivatives calculation, data extraction, coordinate conversion but it is evolving and it is planned to extend to a series of environmental modeling that the IST developed in the past like dam break simulation, landslide run-out estimation and floods due to landslide impact in artificial basins. [1] Neteler M., Mitasova H., Open Source GIS: A GRASS GIS Approach. 3rd Ed. 406 pp, Springer, New York, 2008. [2] Fenoy G., Bozon N., Raghavan V., ZOO Project: The Open Wps Platform. Proceeding of 1st International Workshop on Pervasive Web Mapping, Geoprocessing and Services (WebMGS). Como, http://www.isprs.org/proceedings/XXXVIII/4-W13/ID_32.pdf, 26-27 agosto 2010. [3] Giannecchini S., Aime A., GeoServer, il server open source per la gestione interoperabile dei dati geospaziali. Atti 15a Conferenza Nazionale ASITA. Reggia di Colorno, 15-18 novembre 2011. [4] Perez A.S., OpenLayers Cookbook. Packt Publishing, 2012. ISBN 1849517843. [5] OGC, OpenGIS Web Map Server Implementation Specification, http://www.opengeospatial.org/standards/wms, 2006. [6] OGC, OGC WCS 2.0 Interface Standard - Core, http://portal.opengeospatial.org/files/?artifact_id=41437, 2010b. [7] OGC, OpenGIS Web Processing Service, http://portal.opengeospatial.org/files/?artifact_id=24151, 2007.

Development of a 3D WebGIS System for Retrieving and Visualizing CityGML Data Based on their Geometric and Semantic Characteristics by Using Free and Open Source Technology

NASA Astrophysics Data System (ADS)

Pispidikis, I.; Dimopoulou, E.

2016-10-01

CityGML is considered as an optimal standard for representing 3D city models. However, international experience has shown that visualization of the latter is quite difficult to be implemented on the web, due to the large size of data and the complexity of CityGML. As a result, in the context of this paper, a 3D WebGIS application is developed in order to successfully retrieve and visualize CityGML data in accordance with their respective geometric and semantic characteristics. Furthermore, the available web technologies and the architecture of WebGIS systems are investigated, as provided by international experience, in order to be utilized in the most appropriate way for the purposes of this paper. Specifically, a PostgreSQL/ PostGIS Database is used, in compliance with the 3DCityDB schema. At Server tier, Apache HTTP Server and GeoServer are utilized, while a Server Side programming language PHP is used. At Client tier, which implemented the interface of the application, the following technologies were used: JQuery, AJAX, JavaScript, HTML5, WebGL and Ol3-Cesium. Finally, it is worth mentioning that the application's primary objectives are a user-friendly interface and a fully open source development.

An Interactive, Physics-Based Unmanned Ground Vehicle Simulator Leveraging Open Source Gaming Technology: Progress in the Development and Application of the Virtual Autonomous Navigation Environment (VANE) Desktop

DTIC Science & Technology

2009-01-01

interface, mechatronics, video games 1. INTRODUCTION Engineering methods have substantially and continuously evolved over the past 40 years. In the past...1970s, video games have pioneered interactive simulation and laid the groundwork for inexpensive computing that individuals, corporations, and...purposes. This has not gone unnoticed, and software technology and techniques evolved for video games are beginning to have extraordinary impact in

Healthy Harlem: empowering health consumers through social networking, tailoring and web 2.0 technologies.

PubMed

Khan, Sharib A; McFarlane, Delano J; Li, Jianhua; Ancker, Jessica S; Hutchinson, Carly; Cohall, Alwyn; Kukafka, Rita

2007-10-11

Consumer health informatics has emerged as a strategy to inform and empower patients for self management of their health. The emergence of and explosion in use of user-generated online media (e.g.,blogs) has created new opportunities to inform and educate people about healthy living. Under a prevention research project, we are developing a website that utilizes social content collaboration mediums in conjunction with open-source technologies to create a community-driven resource that provides users with tailored health information.

Verification Tools Secure Online Shopping, Banking

NASA Technical Reports Server (NTRS)

2010-01-01

Just like rover or rocket technology sent into space, the software that controls these technologies must be extensively tested to ensure reliability and effectiveness. Ames Research Center invented the open-source Java Pathfinder (JPF) toolset for the deep testing of Java-based programs. Fujitsu Labs of America Inc., based in Sunnyvale, California, improved the capabilities of the JPF Symbolic Pathfinder tool, establishing the tool as a means of thoroughly testing the functionality and security of Web-based Java applications such as those used for Internet shopping and banking.

Embracing Open Software Development in Solar Physics

NASA Astrophysics Data System (ADS)

Hughitt, V. K.; Ireland, J.; Christe, S.; Mueller, D.

2012-12-01

We discuss two ongoing software projects in solar physics that have adopted best practices of the open source software community. The first, the Helioviewer Project, is a powerful data visualization tool which includes online and Java interfaces inspired by Google Maps (tm). This effort allows users to find solar features and events of interest, and download the corresponding data. Having found data of interest, the user now has to analyze it. The dominant solar data analysis platform is an open-source library called SolarSoft (SSW). Although SSW itself is open-source, the programming language used is IDL, a proprietary language with licensing costs that are prohibative for many institutions and individuals. SSW is composed of a collection of related scripts written by missions and individuals for solar data processing and analysis, without any consistent data structures or common interfaces. Further, at the time when SSW was initially developed, many of the best software development processes of today (mirrored and distributed version control, unit testing, continuous integration, etc.) were not standard, and have not since been adopted. The challenges inherent in developing SolarSoft led to a second software project known as SunPy. SunPy is an open-source Python-based library which seeks to create a unified solar data analysis environment including a number of core datatypes such as Maps, Lightcurves, and Spectra which have consistent interfaces and behaviors. By taking advantage of the large and sophisticated body of scientific software already available in Python (e.g. SciPy, NumPy, Matplotlib), and by adopting many of the best practices refined in open-source software development, SunPy has been able to develop at a very rapid pace while still ensuring a high level of reliability. The Helioviewer Project and SunPy represent two pioneering technologies in solar physics - simple yet flexible data visualization and a powerful, new data analysis environment. We discuss the development of both these efforts and how they are beginning to influence the solar physics community.

Integrating an Educational Game in Moodle LMS

ERIC Educational Resources Information Center

Minovic, Miroslav; Milovanovic, Milos; Minovic, Jelena; Starcevic, Dusan

2012-01-01

The authors present a learning platform based on a computer game. Learning games combine two industries: education and entertainment, which is often called "Edutainment." The game is realized as a strategic game (similar to Risk[TM]), implemented as a module for Moodle CMS, utilizing Java Applet technology. Moodle is an open-source course…

Implementing a Dynamic Database-Driven Course Using LAMP

ERIC Educational Resources Information Center

Laverty, Joseph Packy; Wood, David; Turchek, John

2011-01-01

This paper documents the formulation of a database driven open source architecture web development course. The design of a web-based curriculum faces many challenges: a) relative emphasis of client and server-side technologies, b) choice of a server-side language, and c) the cost and efficient delivery of a dynamic web development, database-driven…

Institutional Expansion: The Case of Grid Computing

ERIC Educational Resources Information Center

Kertcher, Zack

2010-01-01

Evolutionary and revolutionary approaches have dominated the study of scientific, technological and institutional change. Yet, being focused on change within a single field, these approaches have been mute about a third, pervasive process. This process is found in a variety of cases that range from open source software to the Monte Carlo method to…

Adopting Free and Open Source Software (FOSS) in Education

ERIC Educational Resources Information Center

Gupta, Deepty; Surbhi

2018-01-01

Information and Communication Technology (ICT) has provided the better learning opportunities to the present teachers and learners across the world. In the era of internet, many educational resources are free and lot of free softwares are also available. In our country the basic operating system used in educational institutions are proprietary in…

Barriers Regarding Using Technology

ERIC Educational Resources Information Center

Boekenoogen, John Russell

2014-01-01

The University of Florida (UF) used an open-source course management system (CMS) called Sakai. Sakai was the fourth CMS the university has used to help teach live, blended (or hybrid), and online courses over the past ten years. The objective of this dissertation was to identify what barriers may be preventing university personnel from using…

The Open Source Movement, Publishing, and the Dissemination of Knowledge.

ERIC Educational Resources Information Center

Young, Bob

A series of changes in intellectual property law over the last 30 years has made it more difficult for researchers, scientists, authors, and artists to cooperate and collaborate on critically important projects. At the same time, the advance of communications technologies, specifically the Internet, promises to foster an explosion in creativity,…

Pathway to a compact SASE FEL device

NASA Astrophysics Data System (ADS)

Dattoli, G.; Di Palma, E.; Petrillo, V.; Rau, Julietta V.; Sabia, E.; Spassovsky, I.; Biedron, S. G.; Einstein, J.; Milton, S. V.

2015-10-01

Newly developed high peak power lasers have opened the possibilities of driving coherent light sources operating with laser plasma accelerated beams and wave undulators. We speculate on the combination of these two concepts and show that the merging of the underlying technologies could lead to new and interesting possibilities to achieve truly compact, coherent radiator devices.

Development of Web-Based Examination System Using Open Source Programming Model

ERIC Educational Resources Information Center

Abass, Olalere A.; Olajide, Samuel A.; Samuel, Babafemi O.

2017-01-01

The traditional method of assessment (examination) is often characterized by examination questions leakages, human errors during marking of scripts and recording of scores. The technological advancement in the field of computer science has necessitated the need for computer usage in majorly all areas of human life and endeavors, education sector…

Knowledge Ecologies in Fragile Online Learning Environments. Research: Information and Communication Technologies

ERIC Educational Resources Information Center

Henning, Elizabeth; Van der Westhuizen, Duan; Diseko, Rabaitse

2005-01-01

This article gives an account of an inquiry into two different postgraduate student groups' ways of engaging with a virtual learning environment. Using a variety of data sources, including learning artefacts, interview data, open-ended qualitative questionnaires and online discussion postings, the inquiry captured processes of engagement of the…

Sustainable Multilingual Communication: Managing Multilingual Content Using Free and Open Source Content Management Systems

ERIC Educational Resources Information Center

Kelsey, Todd

2011-01-01

It is often too complicated or expensive for most educators, non-profits and individuals to create and maintain a multilingual Web site, because of the technological hurdles, and the logistics of working with content in different languages. But multilingual content management systems, combined with streamlined processes and inexpensive…

The New Meteor Radar at Penn State: Design and First Observations

NASA Technical Reports Server (NTRS)

Urbina, J.; Seal, R.; Dyrud, L.

2011-01-01

In an effort to provide new and improved meteor radar sensing capabilities, Penn State has been developing advanced instruments and technologies for future meteor radars, with primary objectives of making such instruments more capable and more cost effective in order to study the basic properties of the global meteor flux, such as average mass, velocity, and chemical composition. Using low-cost field programmable gate arrays (FPGAs), combined with open source software tools, we describe a design methodology enabling one to develop state-of-the art radar instrumentation, by developing a generalized instrumentation core that can be customized using specialized output stage hardware. Furthermore, using object-oriented programming (OOP) techniques and open-source tools, we illustrate a technique to provide a cost-effective, generalized software framework to uniquely define an instrument s functionality through a customizable interface, implemented by the designer. The new instrument is intended to provide instantaneous profiles of atmospheric parameters and climatology on a daily basis throughout the year. An overview of the instrument design concepts and some of the emerging technologies developed for this meteor radar are presented.

SQL is Dead; Long-live SQL: Relational Database Technology in Science Contexts

NASA Astrophysics Data System (ADS)

Howe, B.; Halperin, D.

2014-12-01

Relational databases are often perceived as a poor fit in science contexts: Rigid schemas, poor support for complex analytics, unpredictable performance, significant maintenance and tuning requirements --- these idiosyncrasies often make databases unattractive in science contexts characterized by heterogeneous data sources, complex analysis tasks, rapidly changing requirements, and limited IT budgets. In this talk, I'll argue that although the value proposition of typical relational database systems are weak in science, the core ideas that power relational databases have become incredibly prolific in open source science software, and are emerging as a universal abstraction for both big data and small data. In addition, I'll talk about two open source systems we are building to "jailbreak" the core technology of relational databases and adapt them for use in science. The first is SQLShare, a Database-as-a-Service system supporting collaborative data analysis and exchange by reducing database use to an Upload-Query-Share workflow with no installation, schema design, or configuration required. The second is Myria, a service that supports much larger scale data, complex analytics, and supports multiple back end systems. Finally, I'll describe some of the ways our collaborators in oceanography, astronomy, biology, fisheries science, and more are using these systems to replace script-based workflows for reasons of performance, flexibility, and convenience.

MSiReader: an open-source interface to view and analyze high resolving power MS imaging files on Matlab platform.

PubMed

Robichaud, Guillaume; Garrard, Kenneth P; Barry, Jeremy A; Muddiman, David C

2013-05-01

During the past decade, the field of mass spectrometry imaging (MSI) has greatly evolved, to a point where it has now been fully integrated by most vendors as an optional or dedicated platform that can be purchased with their instruments. However, the technology is not mature and multiple research groups in both academia and industry are still very actively studying the fundamentals of imaging techniques, adapting the technology to new ionization sources, and developing new applications. As a result, there important varieties of data file formats used to store mass spectrometry imaging data and, concurrent to the development of MSi, collaborative efforts have been undertaken to introduce common imaging data file formats. However, few free software packages to read and analyze files of these different formats are readily available. We introduce here MSiReader, a free open source application to read and analyze high resolution MSI data from the most common MSi data formats. The application is built on the Matlab platform (Mathworks, Natick, MA, USA) and includes a large selection of data analysis tools and features. People who are unfamiliar with the Matlab language will have little difficult navigating the user-friendly interface, and users with Matlab programming experience can adapt and customize MSiReader for their own needs.

MSiReader: An Open-Source Interface to View and Analyze High Resolving Power MS Imaging Files on Matlab Platform

NASA Astrophysics Data System (ADS)

Robichaud, Guillaume; Garrard, Kenneth P.; Barry, Jeremy A.; Muddiman, David C.

2013-05-01

During the past decade, the field of mass spectrometry imaging (MSI) has greatly evolved, to a point where it has now been fully integrated by most vendors as an optional or dedicated platform that can be purchased with their instruments. However, the technology is not mature and multiple research groups in both academia and industry are still very actively studying the fundamentals of imaging techniques, adapting the technology to new ionization sources, and developing new applications. As a result, there important varieties of data file formats used to store mass spectrometry imaging data and, concurrent to the development of MSi, collaborative efforts have been undertaken to introduce common imaging data file formats. However, few free software packages to read and analyze files of these different formats are readily available. We introduce here MSiReader, a free open source application to read and analyze high resolution MSI data from the most common MSi data formats. The application is built on the Matlab platform (Mathworks, Natick, MA, USA) and includes a large selection of data analysis tools and features. People who are unfamiliar with the Matlab language will have little difficult navigating the user-friendly interface, and users with Matlab programming experience can adapt and customize MSiReader for their own needs.

Open source marketing: Camel cigarette brand marketing in the "Web 2.0" world.

PubMed

Freeman, B; Chapman, S

2009-06-01

The international trend towards comprehensive bans on tobacco advertising has seen the tobacco industry become increasingly innovative in its approach to marketing. Further fuelling this innovation is the rapid evolution and accessibility of web-based technology. The internet, as a relatively unregulated marketing environment, provides many opportunities for tobacco companies to pursue their promotional ambitions. In this paper, "open source marketing" is considered as a vehicle that has been appropriated by the tobacco industry, through a case study of efforts to design the packaging for the Camel Signature Blends range of cigarettes. Four sources are used to explore this case study including a marketing literature search, a web-based content search via the Google search engine, interviews with advertising trade informants and an analysis of the Camel brand website. RJ Reynolds (RJR) has proven to be particularly innovative in designing cigarette packaging. RJR engaged with thousands of consumers through their Camel brand website to design four new cigarette flavours and packages. While the Camel Signature Blends packaging designs were subsequently modified for the retail market due to problems arising with their cartoon-like imagery, important lessons arise on how the internet blurs the line between marketing and market research. Open source marketing has the potential to exploit advertising ban loopholes and stretch legal definitions in order to generate positive word of mouth about tobacco products. There are also lessons in the open source marketing movement for more effective tobacco control measures including interactive social marketing campaigns and requiring plain packaging of tobacco products.

Impacts and Viability of Open Source Software on Earth Science Metadata Clearing House and Service Registry Applications

NASA Astrophysics Data System (ADS)

Pilone, D.; Cechini, M. F.; Mitchell, A.

2011-12-01

Earth Science applications typically deal with large amounts of data and high throughput rates, if not also high transaction rates. While Open Source is frequently used for smaller scientific applications, large scale, highly available systems frequently fall back to "enterprise" class solutions like Oracle RAC or commercial grade JEE Application Servers. NASA's Earth Observing System Data and Information System (EOSDIS) provides end-to-end capabilities for managing NASA's Earth science data from multiple sources - satellites, aircraft, field measurements, and various other programs. A core capability of EOSDIS, the Earth Observing System (EOS) Clearinghouse (ECHO), is a highly available search and order clearinghouse of over 100 million pieces of science data that has evolved from its early R&D days to a fully operational system. Over the course of this maturity ECHO has largely transitioned from commercial frameworks, databases, and operating systems to Open Source solutions...and in some cases, back. In this talk we discuss the progression of our technological solutions and our lessons learned in the areas of: ? High performance, large scale searching solutions ? GeoSpatial search capabilities and dealing with multiple coordinate systems ? Search and storage of variable format source (science) data ? Highly available deployment solutions ? Scalable (elastic) solutions to visual searching and image handling Throughout the evolution of the ECHO system we have had to evaluate solutions with respect to performance, cost, developer productivity, reliability, and maintainability in the context of supporting global science users. Open Source solutions have played a significant role in our architecture and development but several critical commercial components remain (or have been reinserted) to meet our operational demands.

The Evolution of Medical Training Simulation in the U.S. Military.

PubMed

Linde, Amber S; Kunkler, Kevin

2016-01-01

The United States has been at war since 2003. During that time, training using Medical Simulation technology has been developed and integrated into military medical training for combat medics, nurses and surgeons. Efforts stemming from the Joint Programmatic Committee-1 (JPC-1) Medical Simulation and Training Portfolio has allowed for the improvement and advancement in military medical training by focusing on research in simulation training technology in order to achieve this. Based upon lessons learned capability gaps have been identified concerning the necessity to validate and enhance combat medial training simulators. These capability gaps include 1) Open Source/Open Architecture; 2) Modularity and Interoperability; and 3) Material and Virtual Reality (VR) Models. Using the capability gaps, JPC-1 has identified important research endeavors that need to be explored.

Investigating Advances in the Acquisition of Secure Systems Based on Open Architecture, Open Source Software, and Software Product Lines

DTIC Science & Technology

2012-01-27

example is found in games converted to serve a purpose other than entertainment , such as the development and use of games for science, technology, and...These play-session histories can then be further modded via video editing or remixing with other media (e.g., adding music ) to better enable cinematic...available OSS (e.g., the Linux Kernel on the Sony PS3 game console2) that game system hackers seek to undo. Finally, games are one of the most commonly

An Interactive Web-Based Analysis Framework for Remote Sensing Cloud Computing

NASA Astrophysics Data System (ADS)

Wang, X. Z.; Zhang, H. M.; Zhao, J. H.; Lin, Q. H.; Zhou, Y. C.; Li, J. H.

2015-07-01

Spatiotemporal data, especially remote sensing data, are widely used in ecological, geographical, agriculture, and military research and applications. With the development of remote sensing technology, more and more remote sensing data are accumulated and stored in the cloud. An effective way for cloud users to access and analyse these massive spatiotemporal data in the web clients becomes an urgent issue. In this paper, we proposed a new scalable, interactive and web-based cloud computing solution for massive remote sensing data analysis. We build a spatiotemporal analysis platform to provide the end-user with a safe and convenient way to access massive remote sensing data stored in the cloud. The lightweight cloud storage system used to store public data and users' private data is constructed based on open source distributed file system. In it, massive remote sensing data are stored as public data, while the intermediate and input data are stored as private data. The elastic, scalable, and flexible cloud computing environment is built using Docker, which is a technology of open-source lightweight cloud computing container in the Linux operating system. In the Docker container, open-source software such as IPython, NumPy, GDAL, and Grass GIS etc., are deployed. Users can write scripts in the IPython Notebook web page through the web browser to process data, and the scripts will be submitted to IPython kernel to be executed. By comparing the performance of remote sensing data analysis tasks executed in Docker container, KVM virtual machines and physical machines respectively, we can conclude that the cloud computing environment built by Docker makes the greatest use of the host system resources, and can handle more concurrent spatial-temporal computing tasks. Docker technology provides resource isolation mechanism in aspects of IO, CPU, and memory etc., which offers security guarantee when processing remote sensing data in the IPython Notebook. Users can write complex data processing code on the web directly, so they can design their own data processing algorithm.

Stakeholder co-development of farm level nutrient management software

NASA Astrophysics Data System (ADS)

Buckley, Cathal; Mechan, Sarah; Macken-Walsh, Aine; Heanue, Kevin

2013-04-01

Over the last number of decades intensification in the use nitrogen (N) and phosphorus (P) in agricultural production has lead to excessive accumulations of these nutrients in soils, groundwaters and surface water bodies (Sutton et al., 2011). According to the European Environment Agency (2012) despite some progress diffuse pollution from agriculture is still significant in more than 40% of Europe's water bodies in rivers and coastal waters, and in one third of the water bodies in lakes and transitional waters. Recently it was estimated that approximately 29% of monitored river channel length is polluted to some degree across the Republic of Ireland. Agricultural sources were suspected in 47 per cent of cases (EPA, 2012). Farm level management practices to reduce nutrient transfers from agricultural land to watercourses can be divided into source reduction and source interception approaches (Ribaudo et al., 2001). Source interception approaches involve capturing nutrients post mobilisation through policy instruments such as riparian buffer zones or wetlands. Conversely, the source reduction approach is preventative in nature and promotes strict management of nutrient at farm and field level to reduce risk of mobilisation in the first instance. This has the potential to deliver a double dividend of reduced nutrient loss to the wider ecosystem while maximising economic return to agricultural production at the field and farm levels. Adoption and use of nutrient management plans among farmers is far from the norm. This research engages key farmer and extension stakeholders to explore how current nutrient management planning software and outputs should be developed to make it more user friendly and usable in a practical way. An open innovation technology co-development approach was adopted to investigate what is demanded by the end users - farm advisors and farmers. Open innovation is a knowledge management strategy that uses the input of stakeholders to improve internal innovation processes. Open innovation incorporates processes such as 'user-led' (farmer and advisor) innovation and the 'co-development' (by technologists and users) of a technology. This strategy is increasingly used by a variety of organisations across sectors to try to ensure that the use of their outputs (products/services/technologies) is optimised by their target customers/clients, by incorporating user insights into the development of outputs. This research use the open innovation co-development framework through farmer and farm advisor focus group sessions to inform the development of a desirable software package for nutrient management planners (farm advisors) and desirable output formats for the end user (farmers). References Sutton, M., Oenema, O., Erisman, J. W., Leip, A., Grinsven, H. & Winiwarter, W. 2011. Too much of a good thing. Nature, 472, 159.161. European Environment Agency, 2012. European waters — assessment of status and pressures. Environmental Protection Agency, 2012. Ireland's Environment: An assessment 2012. Ribaudo, M.O., Heimlich, R., Claassen, R., Peters, M., 2001. Least-cost management of nonpoint source pollution: source reduction versus interception strategies for controlling nitrogen loss in the Mississippi Basin. Ecological Economics, 37, 183-197.

Open Source Platform Application to Groundwater Characterization and Monitoring

NASA Astrophysics Data System (ADS)

Ntarlagiannis, D.; Day-Lewis, F. D.; Falzone, S.; Lane, J. W., Jr.; Slater, L. D.; Robinson, J.; Hammett, S.

2017-12-01

Groundwater characterization and monitoring commonly rely on the use of multiple point sensors and human labor. Due to the number of sensors, labor, and other resources needed, establishing and maintaining an adequate groundwater monitoring network can be both labor intensive and expensive. To improve and optimize the monitoring network design, open source software and hardware components could potentially provide the platform to control robust and efficient sensors thereby reducing costs and labor. This work presents early attempts to create a groundwater monitoring system incorporating open-source software and hardware that will control the remote operation of multiple sensors along with data management and file transfer functions. The system is built around a Raspberry PI 3, that controls multiple sensors in order to perform on-demand, continuous or `smart decision' measurements while providing flexibility to incorporate additional sensors to meet the demands of different projects. The current objective of our technology is to monitor exchange of ionic tracers between mobile and immobile porosity using a combination of fluid and bulk electrical-conductivity measurements. To meet this objective, our configuration uses four sensors (pH, specific conductance, pressure, temperature) that can monitor the fluid electrical properties of interest and guide the bulk electrical measurement. This system highlights the potential of using open source software and hardware components for earth sciences applications. The versatility of the system makes it ideal for use in a large number of applications, and the low cost allows for high resolution (spatially and temporally) monitoring.

Open Source Seismic Software in NOAA's Next Generation Tsunami Warning System

NASA Astrophysics Data System (ADS)

Hellman, S. B.; Baker, B. I.; Hagerty, M. T.; Leifer, J. M.; Lisowski, S.; Thies, D. A.; Donnelly, B. K.; Griffith, F. P.

2014-12-01

The Tsunami Information technology Modernization (TIM) is a project spearheaded by National Oceanic and Atmospheric Administration to update the United States' Tsunami Warning System software currently employed at the Pacific Tsunami Warning Center (Eva Beach, Hawaii) and the National Tsunami Warning Center (Palmer, Alaska). This entirely open source software project will integrate various seismic processing utilities with the National Weather Service Weather Forecast Office's core software, AWIPS2. For the real-time and near real-time seismic processing aspect of this project, NOAA has elected to integrate the open source portions of GFZ's SeisComP 3 (SC3) processing system into AWIPS2. To provide for better tsunami threat assessments we are developing open source tools for magnitude estimations (e.g., moment magnitude, energy magnitude, surface wave magnitude), detection of slow earthquakes with the Theta discriminant, moment tensor inversions (e.g. W-phase and teleseismic body waves), finite fault inversions, and array processing. With our reliance on common data formats such as QuakeML and seismic community standard messaging systems, all new facilities introduced into AWIPS2 and SC3 will be available as stand-alone tools or could be easily integrated into other real time seismic monitoring systems such as Earthworm, Antelope, etc. Additionally, we have developed a template based design paradigm so that the developer or scientist can efficiently create upgrades, replacements, and/or new metrics to the seismic data processing with only a cursory knowledge of the underlying SC3.

Drekar v.2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seefeldt, Ben; Sondak, David; Hensinger, David M.

Drekar is an application code that solves partial differential equations for fluids that can be optionally coupled to electromagnetics. Drekar solves low-mach compressible and incompressible computational fluid dynamics (CFD), compressible and incompressible resistive magnetohydrodynamics (MHD), and multiple species plasmas interacting with electromagnetic fields. Drekar discretization technology includes continuous and discontinuous finite element formulations, stabilized finite element formulations, mixed integration finite element bases (nodal, edge, face, volume) and an initial arbitrary Lagrangian Eulerian (ALE) capability. Drekar contains the implementation of the discretized physics and leverages the open source Trilinos project for both parallel solver capabilities and general finite element discretization tools.more » The code will be released open source under a BSD license. The code is used for fundamental research for simulation of fluids and plasmas on high performance computing environments.« less

An efficient approach to the deployment of complex open source information systems

PubMed Central

Cong, Truong Van Chi; Groeneveld, Eildert

2011-01-01

Complex open source information systems are usually implemented as component-based software to inherit the available functionality of existing software packages developed by third parties. Consequently, the deployment of these systems not only requires the installation of operating system, application framework and the configuration of services but also needs to resolve the dependencies among components. The problem becomes more challenging when the application must be installed and used on different platforms such as Linux and Windows. To address this, an efficient approach using the virtualization technology is suggested and discussed in this paper. The approach has been applied in our project to deploy a web-based integrated information system in molecular genetics labs. It is a low-cost solution to benefit both software developers and end-users. PMID:22102770

IMS: a new technology to develop a telemedicine system.

PubMed

Uceda, J D; Elena, M; Blasco, S; Tarrida, C L; Quero, J M

2008-01-01

The emergent IMS (Internet Protocol Multimedia Subsystem) technology appears to improve the current communication technologies. Its characteristics, such as Quality of Service (QoS), make it an advantageous system for innovative applications. Providing integrated services to users is one of the main reasons for the existence of IMS. Operators provide the technology as an open source, to be able to use services developed by researchers. Combining and integrating them, users will receive completely new services. Our proposal of use for IMS is the development of a telemedicine platform, designed to support not only remote biological signal monitoring, but value-added services for diagnosis and medical care, both of these working in real time.

myChEMBL: a virtual machine implementation of open data and cheminformatics tools.

PubMed

Ochoa, Rodrigo; Davies, Mark; Papadatos, George; Atkinson, Francis; Overington, John P

2014-01-15

myChEMBL is a completely open platform, which combines public domain bioactivity data with open source database and cheminformatics technologies. myChEMBL consists of a Linux (Ubuntu) Virtual Machine featuring a PostgreSQL schema with the latest version of the ChEMBL database, as well as the latest RDKit cheminformatics libraries. In addition, a self-contained web interface is available, which can be modified and improved according to user specifications. The VM is available at: ftp://ftp.ebi.ac.uk/pub/databases/chembl/VM/myChEMBL/current. The web interface and web services code is available at: https://github.com/rochoa85/myChEMBL.

Renewable Energy

NASA Astrophysics Data System (ADS)

Boyle, Godfrey

2004-05-01

Stimulated by recent technological developments and increasing concern over the sustainability and environmental impact of conventional fuel usage, the prospect of producing clean, sustainable power in substantial quantities from renewable energy sources arouses interest around the world. This book provides a comprehensive overview of the principal types of renewable energy--including solar, thermal, photovoltaics, bioenergy, hydro, tidal, wind, wave, and geothermal. In addition, it explains the underlying physical and technological principles of renewable energy and examines the environmental impact and prospects of different energy sources. With more than 350 detailed illustrations, more than 50 tables of data, and a wide range of case studies, Renewable Energy, 2/e is an ideal choice for undergraduate courses in energy, sustainable development, and environmental science. New to the Second Edition ·Full-color design ·Updated to reflect developments in technology, policy, attitides ·Complemented by Energy Systems and Sustainability edited by Godfrey Boyle, Bob Everett and Janet Ramage, all of the Open University, U.K.

Design and Implementation of a Modern Automatic Deformation Monitoring System

NASA Astrophysics Data System (ADS)

Engel, Philipp; Schweimler, Björn

2016-03-01

The deformation monitoring of structures and buildings is an important task field of modern engineering surveying, ensuring the standing and reliability of supervised objects over a long period. Several commercial hardware and software solutions for the realization of such monitoring measurements are available on the market. In addition to them, a research team at the University of Applied Sciences in Neubrandenburg (NUAS) is actively developing a software package for monitoring purposes in geodesy and geotechnics, which is distributed under an open source licence and free of charge. The task of managing an open source project is well-known in computer science, but it is fairly new in a geodetic context. This paper contributes to that issue by detailing applications, frameworks, and interfaces for the design and implementation of open hardware and software solutions for sensor control, sensor networks, and data management in automatic deformation monitoring. It will be discussed how the development effort of networked applications can be reduced by using free programming tools, cloud computing technologies, and rapid prototyping methods.

Differential Expression and Functional Analysis of High-Throughput -Omics Data Using Open Source Tools.

PubMed

Kebschull, Moritz; Fittler, Melanie Julia; Demmer, Ryan T; Papapanou, Panos N

2017-01-01

Today, -omics analyses, including the systematic cataloging of messenger RNA and microRNA sequences or DNA methylation patterns in a cell population, organ, or tissue sample, allow for an unbiased, comprehensive genome-level analysis of complex diseases, offering a large advantage over earlier "candidate" gene or pathway analyses. A primary goal in the analysis of these high-throughput assays is the detection of those features among several thousand that differ between different groups of samples. In the context of oral biology, our group has successfully utilized -omics technology to identify key molecules and pathways in different diagnostic entities of periodontal disease.A major issue when inferring biological information from high-throughput -omics studies is the fact that the sheer volume of high-dimensional data generated by contemporary technology is not appropriately analyzed using common statistical methods employed in the biomedical sciences.In this chapter, we outline a robust and well-accepted bioinformatics workflow for the initial analysis of -omics data generated using microarrays or next-generation sequencing technology using open-source tools. Starting with quality control measures and necessary preprocessing steps for data originating from different -omics technologies, we next outline a differential expression analysis pipeline that can be used for data from both microarray and sequencing experiments, and offers the possibility to account for random or fixed effects. Finally, we present an overview of the possibilities for a functional analysis of the obtained data.

Trans-Proteomic Pipeline, a standardized data processing pipeline for large-scale reproducible proteomics informatics

PubMed Central

Deutsch, Eric W.; Mendoza, Luis; Shteynberg, David; Slagel, Joseph; Sun, Zhi; Moritz, Robert L.

2015-01-01

Democratization of genomics technologies has enabled the rapid determination of genotypes. More recently the democratization of comprehensive proteomics technologies is enabling the determination of the cellular phenotype and the molecular events that define its dynamic state. Core proteomic technologies include mass spectrometry to define protein sequence, protein:protein interactions, and protein post-translational modifications. Key enabling technologies for proteomics are bioinformatic pipelines to identify, quantitate, and summarize these events. The Trans-Proteomics Pipeline (TPP) is a robust open-source standardized data processing pipeline for large-scale reproducible quantitative mass spectrometry proteomics. It supports all major operating systems and instrument vendors via open data formats. Here we provide a review of the overall proteomics workflow supported by the TPP, its major tools, and how it can be used in its various modes from desktop to cloud computing. We describe new features for the TPP, including data visualization functionality. We conclude by describing some common perils that affect the analysis of tandem mass spectrometry datasets, as well as some major upcoming features. PMID:25631240

Trans-Proteomic Pipeline, a standardized data processing pipeline for large-scale reproducible proteomics informatics.

PubMed

Deutsch, Eric W; Mendoza, Luis; Shteynberg, David; Slagel, Joseph; Sun, Zhi; Moritz, Robert L

2015-08-01

Democratization of genomics technologies has enabled the rapid determination of genotypes. More recently the democratization of comprehensive proteomics technologies is enabling the determination of the cellular phenotype and the molecular events that define its dynamic state. Core proteomic technologies include MS to define protein sequence, protein:protein interactions, and protein PTMs. Key enabling technologies for proteomics are bioinformatic pipelines to identify, quantitate, and summarize these events. The Trans-Proteomics Pipeline (TPP) is a robust open-source standardized data processing pipeline for large-scale reproducible quantitative MS proteomics. It supports all major operating systems and instrument vendors via open data formats. Here, we provide a review of the overall proteomics workflow supported by the TPP, its major tools, and how it can be used in its various modes from desktop to cloud computing. We describe new features for the TPP, including data visualization functionality. We conclude by describing some common perils that affect the analysis of MS/MS datasets, as well as some major upcoming features. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

C3-PRO: Connecting ResearchKit to the Health System Using i2b2 and FHIR.

PubMed

Pfiffner, Pascal B; Pinyol, Isaac; Natter, Marc D; Mandl, Kenneth D

2016-01-01

A renewed interest by consumer information technology giants in the healthcare domain is focused on transforming smartphones into personal health data storage devices. With the introduction of the open source ResearchKit, Apple provides a framework for researchers to inform and consent research subjects, and to readily collect personal health data and patient reported outcomes (PRO) from distributed populations. However, being research backend agnostic, ResearchKit does not provide data transmission facilities, leaving research apps disconnected from the health system. Personal health data and PROs are of the most value when presented in context along with health system data. Our aim was to build a toolchain that allows easy and secure integration of personal health and PRO data into an open source platform widely adopted across 140 academic medical centers. We present C3-PRO: the Consent, Contact, and Community framework for Patient Reported Outcomes. This open source toolchain connects, in a standards-compliant fashion, any ResearchKit app to the widely-used clinical research infrastructure Informatics for Integrating Biology and the Bedside (i2b2). C3-PRO leverages the emerging health data standard Fast Healthcare Interoperability Resources (FHIR).

Performance Evaluation of Block Acquisition and Tracking Algorithms Using an Open Source GPS Receiver Platform

NASA Technical Reports Server (NTRS)

Ramachandran, Ganesh K.; Akopian, David; Heckler, Gregory W.; Winternitz, Luke B.

2011-01-01

Location technologies have many applications in wireless communications, military and space missions, etc. US Global Positioning System (GPS) and other existing and emerging Global Navigation Satellite Systems (GNSS) are expected to provide accurate location information to enable such applications. While GNSS systems perform very well in strong signal conditions, their operation in many urban, indoor, and space applications is not robust or even impossible due to weak signals and strong distortions. The search for less costly, faster and more sensitive receivers is still in progress. As the research community addresses more and more complicated phenomena there exists a demand on flexible multimode reference receivers, associated SDKs, and development platforms which may accelerate and facilitate the research. One of such concepts is the software GPS/GNSS receiver (GPS SDR) which permits a facilitated access to algorithmic libraries and a possibility to integrate more advanced algorithms without hardware and essential software updates. The GNU-SDR and GPS-SDR open source receiver platforms are such popular examples. This paper evaluates the performance of recently proposed block-corelator techniques for acquisition and tracking of GPS signals using open source GPS-SDR platform.

Open source pipeline for ESPaDOnS reduction and analysis

NASA Astrophysics Data System (ADS)

Martioli, Eder; Teeple, Doug; Manset, Nadine; Devost, Daniel; Withington, Kanoa; Venne, Andre; Tannock, Megan

2012-09-01

OPERA is a Canada-France-Hawaii Telescope (CFHT) open source collaborative software project currently under development for an ESPaDOnS echelle spectro-polarimetric image reduction pipeline. OPERA is designed to be fully automated, performing calibrations and reduction, producing one-dimensional intensity and polarimetric spectra. The calibrations are performed on two-dimensional images. Spectra are extracted using an optimal extraction algorithm. While primarily designed for CFHT ESPaDOnS data, the pipeline is being written to be extensible to other echelle spectrographs. A primary design goal is to make use of fast, modern object-oriented technologies. Processing is controlled by a harness, which manages a set of processing modules, that make use of a collection of native OPERA software libraries and standard external software libraries. The harness and modules are completely parametrized by site configuration and instrument parameters. The software is open- ended, permitting users of OPERA to extend the pipeline capabilities. All these features have been designed to provide a portable infrastructure that facilitates collaborative development, code re-usability and extensibility. OPERA is free software with support for both GNU/Linux and MacOSX platforms. The pipeline is hosted on SourceForge under the name "opera-pipeline".

C3-PRO: Connecting ResearchKit to the Health System Using i2b2 and FHIR

PubMed Central

Pfiffner, Pascal B.; Pinyol, Isaac; Natter, Marc D.; Mandl, Kenneth D.

2016-01-01

A renewed interest by consumer information technology giants in the healthcare domain is focused on transforming smartphones into personal health data storage devices. With the introduction of the open source ResearchKit, Apple provides a framework for researchers to inform and consent research subjects, and to readily collect personal health data and patient reported outcomes (PRO) from distributed populations. However, being research backend agnostic, ResearchKit does not provide data transmission facilities, leaving research apps disconnected from the health system. Personal health data and PROs are of the most value when presented in context along with health system data. Our aim was to build a toolchain that allows easy and secure integration of personal health and PRO data into an open source platform widely adopted across 140 academic medical centers. We present C3-PRO: the Consent, Contact, and Community framework for Patient Reported Outcomes. This open source toolchain connects, in a standards-compliant fashion, any ResearchKit app to the widely-used clinical research infrastructure Informatics for Integrating Biology and the Bedside (i2b2). C3-PRO leverages the emerging health data standard Fast Healthcare Interoperability Resources (FHIR). PMID:27031856

Sirepo for Synchrotron Radiation Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagler, Robert; Moeller, Paul; Rakitin, Maksim

Sirepo is an open source framework for cloud computing. The graphical user interface (GUI) for Sirepo, also known as the client, executes in any HTML5 compliant web browser on any computing platform, including tablets. The client is built in JavaScript, making use of the following open source libraries: Bootstrap, which is fundamental for cross-platform web applications; AngularJS, which provides a model–view–controller (MVC) architecture and GUI components; and D3.js, which provides interactive plots and data-driven transformations. The Sirepo server is built on the following Python technologies: Flask, which is a lightweight framework for web development; Jinja, which is a secure andmore » widely used templating language; and Werkzeug, a utility library that is compliant with the WSGI standard. We use Nginx as the HTTP server and proxy, which provides a scalable event-driven architecture. The physics codes supported by Sirepo execute inside a Docker container. One of the codes supported by Sirepo is the Synchrotron Radiation Workshop (SRW). SRW computes synchrotron radiation from relativistic electrons in arbitrary magnetic fields and propagates the radiation wavefronts through optical beamlines. SRW is open source and is primarily supported by Dr. Oleg Chubar of NSLS-II at Brookhaven National Laboratory.« less

Low-cost embedded systems for democratizing ocean sensor technology in the coastal zone

NASA Astrophysics Data System (ADS)

Glazer, B. T.; Lio, H. I.

2017-12-01

Environmental sciences suffer from undersampling. Enabling sustained and unattended data collection in the coastal zone typically involves expensive instrumentation and infrastructure deployed as cabled observatories or moorings with little flexibility in deployment location following initial installation. High costs of commercially-available or custom instruments have limited the number of sensor sites that can be targeted by academic researchers, and have also limited engagement with the public. We have developed a novel, low-cost, open-source sensor and software platform to enable wireless data transfer of biogeochemical sensors in the coastal zone. The platform is centered upon widely available, low-cost, single board computers and microcontrollers. We have used a blend of on-hand research-grade sensors and low-cost open-source electronics that can be assembled by tech-savvy non-engineers. Robust, open-source code that remains customizable for specific miniNode configurations can match a specific site's measurement needs, depending on the scientific research priorities. We have demonstrated prototype capabilities and versatility through lab testing and field deployments of multiple sensor nodes with multiple sensor inputs, all of which are streaming near-real-time data from Kaneohe Bay over wireless RF links to a shore-based base station.

How Educational Ideas Catch On: The Promotion of Popular Education Innovations and the Role of Evidence

ERIC Educational Resources Information Center

Carrier, Nathalie

2017-01-01

Background: Within the wider education industry, a large quantity of ideas, practices and products are routinely promoted as useful innovations. These innovations span many forms such as software applications, open source courseware, online learning platforms and web 2.0 technologies. Coupled with this promotion, there is increasing interest and…

A Methodological Approach to Support Collaborative Media Creation in an E-Learning Higher Education Context

ERIC Educational Resources Information Center

Ornellas, Adriana; Muñoz Carril, Pablo César

2014-01-01

This article outlines a methodological approach to the creation, production and dissemination of online collaborative audio-visual projects, using new social learning technologies and open-source video tools, which can be applied to any e-learning environment in higher education. The methodology was developed and used to design a course in the…

Organizational Commitment of Employees of TV Production Center (Educational Television ETV) for Open Education Faculty, Anadolu University

ERIC Educational Resources Information Center

Gürses, Nedim; Demiray, Emine

2009-01-01

In like manner as conventional education and teaching approaches distance education tends to model the same procedures. Indeed, formerly enriched on printed material served as a primary source. However, thanks to the developments in technology and evolution in education, computerised information has made inroads in distance education programmes.…

Distance Learning Approaches in the Mathematical Training of Pedagogical Institutes's Students

ERIC Educational Resources Information Center

Fomina, Tatyana; Vorobjev, Grigory; Kalitvin, Vladimir

2016-01-01

Nowadays, the Information technologies are more and more widely used in the mathematical education system. The generalization of experience and its implementation by means of the open source software is of current interest. It is also important to address this problem due to the transfer to the new FSES (Federal State Education Standards) of high…

A New Model for American Colleges Abroad: Quiet Partner

ERIC Educational Resources Information Center

Mills, Andrew

2009-01-01

For the past two years, a steady stream of visitors from the Massachusetts Institute of Technology (MIT) has made the roughly 7,000-mile trek from Cambridge to Abu Dhabi to help build what aspires to be the first graduate-level research university devoted entirely to fostering renewable, clean, and sustainable sources of energy. Set to open this…

An Analysis of Texts in Turkish Coursebooks Studied at Open Education Secondary School

ERIC Educational Resources Information Center

Kolac, Emine

2015-01-01

Head spinning pace of change and development in information and technology has not yet discredited coursebooks as the major classroom tool and equipment. Coursebooks, as they have always been, are still the primary source and tool of teaching and learning process. As with the mainstream education, well-prepared coursebooks and texts are also a…

An Unexpected Ally: Using Microsoft's SharePoint to Create a Departmental Intranet

ERIC Educational Resources Information Center

Dahl, David

2010-01-01

In September 2008, the Albert S. Cook Library at Towson University implemented an intranet to support the various functions of the library's Reference Department. This intranet is called the RefPortal. After exploring open source options and other Web 2.0 tools, the department (under the guidance of the library technology coordinator) chose…

A Framework for Adopting LMS to Introduce e-Learning in a Traditional Course

ERIC Educational Resources Information Center

Georgouli, Katerina; Skalkidis, Ilias; Guerreiro, Pedro

2008-01-01

As more and more teachers in tertiary education experiment with technology, looking for new ways of enhancing their traditional ways of teaching, the need of flexible tools able to support well planned blended learning scenarios emerges. Learning Management Systems, especially those which are based on open source software, have shown to be very…

Technology Tips: Building Interactive Demonstrations with Sage

ERIC Educational Resources Information Center

Murray, Maura

2013-01-01

Sage is an open-source software package that can be used in many different areas of mathematics, ranging from algebra to calculus and beyond. One of the most exciting pedagogical features of Sage (http://www.sagemath.org) is its ability to create interacts--interactive examples that can be used in a classroom demonstration or by students in a…

Evaluation of open source data mining software packages

Treesearch

Bonnie Ruefenacht; Greg Liknes; Andrew J. Lister; Haans Fisk; Dan Wendt

2009-01-01

Since 2001, the USDA Forest Service (USFS) has used classification and regression-tree technology to map USFS Forest Inventory and Analysis (FIA) biomass, forest type, forest type groups, and National Forest vegetation. This prior work used Cubist/See5 software for the analyses. The objective of this project, sponsored by the Remote Sensing Steering Committee (RSSC),...

Technology for Teaching

ERIC Educational Resources Information Center

Perez, Frank; Jaworski, Nick; Thibeault, Matthew D.

2011-01-01

In this article, the authors review Band-in-a-Box (BIAB), 2011.5 Mac Version and Audacity, a free and open-source software. Music educators at all grade levels can appreciate having a time-saving program to help them provide students with the practice tools they need. BIAB can do that, and it is easy to use. Its primary focus and strength is in…

Organizational Commitment of Employees of TV Production Center (Educational Television ETV) for Open Education Facility, Anadolu University

ERIC Educational Resources Information Center

Gurses, Nedim; Demiray, Emine

2009-01-01

In like manner as conventional education and teaching approaches distance education tends to model the same procedures. Indeed, formerly enriched on printed material served as a primary source. However, thanks to the developments in technology and evolution in education, computerised information has made inroads in distance education programmes.…

40 CFR 52.1520 - Identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

....04. Env-A 1000 Prevention, Abatement, and Control of Open Source Air Pollution 5/19/1989 8/19/1994... Available Control Technology (RACT) 05/26/11 11/8/12, 77 FR 66921 Approved PART Env-A 1201 through 1222 for... TP-0008 7/8/2011 8/22/2012, 77 FR 50602 Flue Gas Desulfurization System. Concord Litho Group ARD-07...

40 CFR 52.1520 - Identification of plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

....04. Env-A 1000 Prevention, Abatement, and Control of Open Source Air Pollution 5/19/1989 8/19/1994... Available Control Technology (RACT) 05/26/11 11/8/12, 77 FR 66921 Approved PART Env-A 1201 through 1222 for... FR 50602 Flue Gas Desulfurization System. Concord Litho Group ARD-07-003 9/17/2007 11/5/2012, 77 FR...

Land cover change map comparisons using open source web mapping technologies

Treesearch

Erik Lindblom; Ian Housman; Tony Guay; Mark Finco; Kevin Megown

2015-01-01

The USDA Forest Service is evaluating the status of current landscape change maps and assessing gaps in their information content. These activities have been occurring under the auspices of the Landscape Change Monitoring System (LCMS) project, which is a joint effort between USFS Research, USFS Remote Sensing Applications Center (RSAC), USGS Earth Resources...

Leveraging Open Source Software in the Education Management and Leadership Training

ERIC Educational Resources Information Center

Nordin, Norazah; Ibrahim, Sham; Mohd. Hamzah, Mohd. Izham; Embi, Mohamed Amin; Din, Rosseni

2012-01-01

The development in information technology has now moved from the first wave that emphasises on computer technical skills to the second wave which focuses on the application and management aspects. This paper aims to investigate the use of learning management system among future school heads in education management and leadership. The study was…

Micro-combs: A novel generation of optical sources

NASA Astrophysics Data System (ADS)

Pasquazi, Alessia; Peccianti, Marco; Razzari, Luca; Moss, David J.; Coen, Stéphane; Erkintalo, Miro; Chembo, Yanne K.; Hansson, Tobias; Wabnitz, Stefan; Del'Haye, Pascal; Xue, Xiaoxiao; Weiner, Andrew M.; Morandotti, Roberto

2018-01-01

The quest towards the integration of ultra-fast, high-precision optical clocks is reflected in the large number of high-impact papers on the topic published in the last few years. This interest has been catalysed by the impact that high-precision optical frequency combs (OFCs) have had on metrology and spectroscopy in the last decade [1-5]. OFCs are often referred to as optical rulers: their spectra consist of a precise sequence of discrete and equally-spaced spectral lines that represent precise marks in frequency. Their importance was recognised worldwide with the 2005 Nobel Prize being awarded to T.W. Hänsch and J. Hall for their breakthrough in OFC science [5]. They demonstrated that a coherent OFC source with a large spectrum - covering at least one octave - can be stabilised with a self-referenced approach, where the frequency and the phase do not vary and are completely determined by the source physical parameters. These fully stabilised OFCs solved the challenge of directly measuring optical frequencies and are now exploited as the most accurate time references available, ready to replace the current standard for time. Very recent advancements in the fabrication technology of optical micro-cavities [6] are contributing to the development of OFC sources. These efforts may open up the way to realise ultra-fast and stable optical clocks and pulsed sources with extremely high repetition-rates, in the form of compact and integrated devices. Indeed, the fabrication of high-quality factor (high-Q) micro-resonators, capable of dramatically amplifying the optical field, can be considered a photonics breakthrough that has boosted not only the scientific investigation of OFC sources [7-13] but also of optical sensors and compact light modulators [6,14]. In this framework, the demonstration of planar high-Q resonators, compatible with silicon technology [10-14], has opened up a unique opportunity for these devices to provide entirely new capabilities for photonic-integrated technologies. Indeed, it is well acknowledged by the electronics industry that future generations of computer processing chips will inevitably require an extremely high density of copper-based interconnections, significantly increasing the chip power dissipation to beyond practical levels [15-17]; hence, conventional approaches to chip design must undergo radical changes. On-chip optical networks, or optical interconnects, can offer high speed and low energy per-transferred-bit, and micro-resonators are widely seen as a key component to interface the electronic world with photonics. Many information technology industries have recently focused on the development of integrated ring resonators to be employed for electrically-controlled light modulators [14-17], greatly advancing the maturity of micro-resonator technology as a whole. Recently [11-13], the demonstration of OFC sources in micro-resonators fabricated in electronic (i.e. in complementary metal oxide semiconductor (CMOS)) compatible platforms has given micro-cavities an additional appeal, with the possibility of exploiting them as light sources in microchips. This scenario is creating fierce competition in developing highly efficient OFC generators based on micro-cavities which can radically change the nature of information transport and processing. Even in telecommunications, perhaps a more conventional environment for optical technologies, novel time-division multiplexed optical systems will require extremely stable optical clocks at ultra-high pulse repetition-rates towards the THz scale. Furthermore, arbitrary pulse generators based on OFC [18,19] are seen as one of the most promising solutions for this next generation of high-capacity optical coherent communication systems. This review will summarise the recent exciting achievements in the field of micro-combs, namely optical frequency combs based on high-Q micro-resonators, with a perspective on both the potential of this technology, as well as the open questions and challenges that remain.

The ImageJ ecosystem: an open platform for biomedical image analysis

PubMed Central

Schindelin, Johannes; Rueden, Curtis T.; Hiner, Mark C.; Eliceiri, Kevin W.

2015-01-01

Technology in microscopy advances rapidly, enabling increasingly affordable, faster, and more precise quantitative biomedical imaging, which necessitates correspondingly more-advanced image processing and analysis techniques. A wide range of software is available – from commercial to academic, special-purpose to Swiss army knife, small to large–but a key characteristic of software that is suitable for scientific inquiry is its accessibility. Open-source software is ideal for scientific endeavors because it can be freely inspected, modified, and redistributed; in particular, the open-software platform ImageJ has had a huge impact on life sciences, and continues to do so. From its inception, ImageJ has grown significantly due largely to being freely available and its vibrant and helpful user community. Scientists as diverse as interested hobbyists, technical assistants, students, scientific staff, and advanced biology researchers use ImageJ on a daily basis, and exchange knowledge via its dedicated mailing list. Uses of ImageJ range from data visualization and teaching to advanced image processing and statistical analysis. The software's extensibility continues to attract biologists at all career stages as well as computer scientists who wish to effectively implement specific image-processing algorithms. In this review, we use the ImageJ project as a case study of how open-source software fosters its suites of software tools, making multitudes of image-analysis technology easily accessible to the scientific community. We specifically explore what makes ImageJ so popular, how it impacts life science, how it inspires other projects, and how it is self-influenced by coevolving projects within the ImageJ ecosystem. PMID:26153368

The ImageJ ecosystem: An open platform for biomedical image analysis.

PubMed

Schindelin, Johannes; Rueden, Curtis T; Hiner, Mark C; Eliceiri, Kevin W

2015-01-01

Technology in microscopy advances rapidly, enabling increasingly affordable, faster, and more precise quantitative biomedical imaging, which necessitates correspondingly more-advanced image processing and analysis techniques. A wide range of software is available-from commercial to academic, special-purpose to Swiss army knife, small to large-but a key characteristic of software that is suitable for scientific inquiry is its accessibility. Open-source software is ideal for scientific endeavors because it can be freely inspected, modified, and redistributed; in particular, the open-software platform ImageJ has had a huge impact on the life sciences, and continues to do so. From its inception, ImageJ has grown significantly due largely to being freely available and its vibrant and helpful user community. Scientists as diverse as interested hobbyists, technical assistants, students, scientific staff, and advanced biology researchers use ImageJ on a daily basis, and exchange knowledge via its dedicated mailing list. Uses of ImageJ range from data visualization and teaching to advanced image processing and statistical analysis. The software's extensibility continues to attract biologists at all career stages as well as computer scientists who wish to effectively implement specific image-processing algorithms. In this review, we use the ImageJ project as a case study of how open-source software fosters its suites of software tools, making multitudes of image-analysis technology easily accessible to the scientific community. We specifically explore what makes ImageJ so popular, how it impacts the life sciences, how it inspires other projects, and how it is self-influenced by coevolving projects within the ImageJ ecosystem. © 2015 Wiley Periodicals, Inc.

Perspectives on micropole undulators in synchrotron radiation technology

NASA Astrophysics Data System (ADS)

Tatchyn, Roman; Csonka, Paul; Toor, Arthur

1989-07-01

Micropole undulators promise to advance synchrotron radiation (SR) technology in two distinct ways. The first is in the development of economical, low-energy storage rings, or linacs, as soft x-ray sources, and the second is in the opening up of gamma-ray spectral ranges on high-energy storage rings. In this paper the promise and current status of micropole undulator (MPU) technology are discussed, and a review of some practical obstacles to the implementation of MPU's on present-day storage rings is given. Some successful results of recent performance measurements of micropole undulators on the Lawrence Livermore National Laboratory linac are briefly summarized.

Building Energy Management Open Source Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

This is the repository for Building Energy Management Open Source Software (BEMOSS), which is an open source operating system that is engineered to improve sensing and control of equipment in small- and medium-sized commercial buildings. BEMOSS offers the following key features: (1) Open source, open architecture – BEMOSS is an open source operating system that is built upon VOLTTRON – a distributed agent platform developed by Pacific Northwest National Laboratory (PNNL). BEMOSS was designed to make it easy for hardware manufacturers to seamlessly interface their devices with BEMOSS. Software developers can also contribute to adding additional BEMOSS functionalities and applications.more » (2) Plug & play – BEMOSS was designed to automatically discover supported load controllers (including smart thermostats, VAV/RTUs, lighting load controllers and plug load controllers) in commercial buildings. (3) Interoperability – BEMOSS was designed to work with load control devices form different manufacturers that operate on different communication technologies and data exchange protocols. (4) Cost effectiveness – Implementation of BEMOSS deemed to be cost-effective as it was built upon a robust open source platform that can operate on a low-cost single-board computer, such as Odroid. This feature could contribute to its rapid deployment in small- or medium-sized commercial buildings. (5) Scalability and ease of deployment – With its multi-node architecture, BEMOSS provides a distributed architecture where load controllers in a multi-floor and high occupancy building could be monitored and controlled by multiple single-board computers hosting BEMOSS. This makes it possible for a building engineer to deploy BEMOSS in one zone of a building, be comfortable with its operation, and later on expand the deployment to the entire building to make it more energy efficient. (6) Ability to provide local and remote monitoring – BEMOSS provides both local and remote monitoring ability with role-based access control. (7) Security – In addition to built-in security features provided by VOLTTRON, BEMOSS provides enhanced security features, including BEMOSS discovery approval process, encrypted core-to-node communication, thermostat anti-tampering feature and many more. (8) Support from the Advisory Committee – BEMOSS was developed in consultation with an advisory committee from the beginning of the project. BEMOSS advisory committee comprises representatives from 22 organizations from government and industry.« less

openBIS: a flexible framework for managing and analyzing complex data in biology research

PubMed Central

2011-01-01

Background Modern data generation techniques used in distributed systems biology research projects often create datasets of enormous size and diversity. We argue that in order to overcome the challenge of managing those large quantitative datasets and maximise the biological information extracted from them, a sound information system is required. Ease of integration with data analysis pipelines and other computational tools is a key requirement for it. Results We have developed openBIS, an open source software framework for constructing user-friendly, scalable and powerful information systems for data and metadata acquired in biological experiments. openBIS enables users to collect, integrate, share, publish data and to connect to data processing pipelines. This framework can be extended and has been customized for different data types acquired by a range of technologies. Conclusions openBIS is currently being used by several SystemsX.ch and EU projects applying mass spectrometric measurements of metabolites and proteins, High Content Screening, or Next Generation Sequencing technologies. The attributes that make it interesting to a large research community involved in systems biology projects include versatility, simplicity in deployment, scalability to very large data, flexibility to handle any biological data type and extensibility to the needs of any research domain. PMID:22151573

Open Data, Open Specifications and Free and Open Source Software: A powerful mix to create distributed Web-based water information systems

NASA Astrophysics Data System (ADS)

Arias, Carolina; Brovelli, Maria Antonia; Moreno, Rafael

2015-04-01

We are in an age when water resources are increasingly scarce and the impacts of human activities on them are ubiquitous. These problems don't respect administrative or political boundaries and they must be addressed integrating information from multiple sources at multiple spatial and temporal scales. Communication, coordination and data sharing are critical for addressing the water conservation and management issues of the 21st century. However, different countries, provinces, local authorities and agencies dealing with water resources have diverse organizational, socio-cultural, economic, environmental and information technology (IT) contexts that raise challenges to the creation of information systems capable of integrating and distributing information across their areas of responsibility in an efficient and timely manner. Tight and disparate financial resources, and dissimilar IT infrastructures (data, hardware, software and personnel expertise) further complicate the creation of these systems. There is a pressing need for distributed interoperable water information systems that are user friendly, easily accessible and capable of managing and sharing large volumes of spatial and non-spatial data. In a distributed system, data and processes are created and maintained in different locations each with competitive advantages to carry out specific activities. Open Data (data that can be freely distributed) is available in the water domain, and it should be further promoted across countries and organizations. Compliance with Open Specifications for data collection, storage and distribution is the first step toward the creation of systems that are capable of interacting and exchanging data in a seamlessly (interoperable) way. The features of Free and Open Source Software (FOSS) offer low access cost that facilitate scalability and long-term viability of information systems. The World Wide Web (the Web) will be the platform of choice to deploy and access these systems. Geospatial capabilities for mapping, visualization, and spatial analysis will be important components of these new generation of Web-based interoperable information systems in the water domain. The purpose of this presentation is to increase the awareness of scientists, IT personnel and agency managers about the advantages offered by the combined use of Open Data, Open Specifications for geospatial and water-related data collection, storage and sharing, as well as mature FOSS projects for the creation of interoperable Web-based information systems in the water domain. A case study is used to illustrate how these principles and technologies can be integrated to create a system with the previously mentioned characteristics for managing and responding to flood events.

A Tale of Two Observing Systems: Interoperability in the World of Microsoft Windows

NASA Astrophysics Data System (ADS)

Babin, B. L.; Hu, L.

2008-12-01

Louisiana Universities Marine Consortium's (LUMCON) and Dauphin Island Sea Lab's (DISL) Environmental Monitoring System provide a unified coastal ocean observing system. These two systems are mirrored to maintain autonomy while offering an integrated data sharing environment. Both systems collect data via Campbell Scientific Data loggers, store the data in Microsoft SQL servers, and disseminate the data in real- time on the World Wide Web via Microsoft Internet Information Servers and Active Server Pages (ASP). The utilization of Microsoft Windows technologies presented many challenges to these observing systems as open source tools for interoperability grow. The current open source tools often require the installation of additional software. In order to make data available through common standards formats, "home grown" software has been developed. One example of this is the development of software to generate xml files for transmission to the National Data Buoy Center (NDBC). OOSTethys partners develop, test and implement easy-to-use, open-source, OGC-compliant software., and have created a working prototype of networked, semantically interoperable, real-time data systems. Partnering with OOSTethys, we are developing a cookbook to implement OGC web services. The implementation will be written in ASP, will run in a Microsoft operating system environment, and will serve data via Sensor Observation Services (SOS). This cookbook will give observing systems running Microsoft Windows the tools to easily participate in the Open Geospatial Consortium (OGC) Oceans Interoperability Experiment (OCEANS IE).

Integrating new Storage Technologies into EOS

NASA Astrophysics Data System (ADS)

Peters, Andreas J.; van der Ster, Dan C.; Rocha, Joaquim; Lensing, Paul

2015-12-01

The EOS[1] storage software was designed to cover CERN disk-only storage use cases in the medium-term trading scalability against latency. To cover and prepare for long-term requirements the CERN IT data and storage services group (DSS) is actively conducting R&D and open source contributions to experiment with a next generation storage software based on CEPH[3] and ethernet enabled disk drives. CEPH provides a scale-out object storage system RADOS and additionally various optional high-level services like S3 gateway, RADOS block devices and a POSIX compliant file system CephFS. The acquisition of CEPH by Redhat underlines the promising role of CEPH as the open source storage platform of the future. CERN IT is running a CEPH service in the context of OpenStack on a moderate scale of 1 PB replicated storage. Building a 100+PB storage system based on CEPH will require software and hardware tuning. It is of capital importance to demonstrate the feasibility and possibly iron out bottlenecks and blocking issues beforehand. The main idea behind this R&D is to leverage and contribute to existing building blocks in the CEPH storage stack and implement a few CERN specific requirements in a thin, customisable storage layer. A second research topic is the integration of ethernet enabled disks. This paper introduces various ongoing open source developments, their status and applicability.

Open-Source Electronic Health Record Systems for Low-Resource Settings: Systematic Review.

PubMed

Syzdykova, Assel; Malta, André; Zolfo, Maria; Diro, Ermias; Oliveira, José Luis

2017-11-13

Despite the great impact of information and communication technologies on clinical practice and on the quality of health services, this trend has been almost exclusive to developed countries, whereas countries with poor resources suffer from many economic and social issues that have hindered the real benefits of electronic health (eHealth) tools. As a component of eHealth systems, electronic health records (EHRs) play a fundamental role in patient management and effective medical care services. Thus, the adoption of EHRs in regions with a lack of infrastructure, untrained staff, and ill-equipped health care providers is an important task. However, the main barrier to adopting EHR software in low- and middle-income countries is the cost of its purchase and maintenance, which highlights the open-source approach as a good solution for these underserved areas. The aim of this study was to conduct a systematic review of open-source EHR systems based on the requirements and limitations of low-resource settings. First, we reviewed existing literature on the comparison of available open-source solutions. In close collaboration with the University of Gondar Hospital, Ethiopia, we identified common limitations in poor resource environments and also the main requirements that EHRs should support. Then, we extensively evaluated the current open-source EHR solutions, discussing their strengths and weaknesses, and their appropriateness to fulfill a predefined set of features relevant for low-resource settings. The evaluation methodology allowed assessment of several key aspects of available solutions that are as follows: (1) integrated applications, (2) configurable reports, (3) custom reports, (4) custom forms, (5) interoperability, (6) coding systems, (7) authentication methods, (8) patient portal, (9) access control model, (10) cryptographic features, (11) flexible data model, (12) offline support, (13) native client, (14) Web client,(15) other clients, (16) code-based language, (17) development activity, (18) modularity, (19) user interface, (20) community support, and (21) customization. The quality of each feature is discussed for each of the evaluated solutions and a final comparison is presented. There is a clear demand for open-source, reliable, and flexible EHR systems in low-resource settings. In this study, we have evaluated and compared five open-source EHR systems following a multidimensional methodology that can provide informed recommendations to other implementers, developers, and health care professionals. We hope that the results of this comparison can guide decision making when needing to adopt, install, and maintain an open-source EHR solution in low-resource settings. ©Assel Syzdykova, André Malta, Maria Zolfo, Ermias Diro, José Luis Oliveira. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 13.11.2017.

An innovative use of instant messaging technology to support a library's single-service point.

PubMed

Horne, Andrea S; Ragon, Bart; Wilson, Daniel T

2012-01-01

A library service model that provides reference and instructional services by summoning reference librarians from a single service point is described. The system utilizes Libraryh3lp, an open-source, multioperator instant messaging system. The selection and refinement of this solution and technical challenges encountered are explored, as is the design of public services around this technology, usage of the system, and best practices. This service model, while a major cultural and procedural change at first, is now a routine aspect of customer service for this library.

Student’s Entrepreneur Model Development in Creative Industry through Utilization of Web Development Software and Educational Game

NASA Astrophysics Data System (ADS)

Hasan, B.; Hasbullah, H.; Elvyanti, S.; Purnama, W.

2018-02-01

The creative industry is the utilization of creativity, skill and talent of individuals to create wealth and jobs by generating and exploiting creativity power of individual. In the field of design, utilization of information technology can spur creative industry, development of creative industry design will accommodate a lot of creative energy that can pour their ideas and creativity without limitations. Open Source software is a trend in the field of information technology has developed since the 1990s. Examples of applications developed by the Open Source approach is the Apache web services, Linux and Android Operating System, the MySQL database. This community service activities based entrepreneurship aims to: 1). give an idea about the profile of the UPI student’s knowledge of entrepreneurship about the business based creative industries in software by using web software development and educational game 2) create a model for fostering entrepreneurship based on the creative industries in software by leveraging web development and educational games, 3) conduct training and guidance on UPI students who want to develop business in the field of creative industries engaged in the software industry . PKM-based entrepreneurship activity was attended by about 35 students DPTE FPTK UPI had entrepreneurial high interest and competence in information technology. Outcome generated from PKM entrepreneurship is the emergence of entrepreneurs from the students who are interested in the creative industry in the field of software which is able to open up business opportunities for themselves and others. Another outcome of this entrepreneurship PKM activity is the publication of articles or scientific publications in journals of national/international indexed.

Educational Technology Use Among US Colleges and Schools of Pharmacy

PubMed Central

Cain, Jeff J.; Malone, Patrick M.; Chapman, Tracy A.; Walters, Ryan W.; Thompson, David C.; Riedl, Steven T.

2011-01-01

Objective. To develop a searchable database of educational technologies used at schools and colleges of pharmacy. Methods. A cross-sectional survey design was used to determine what educational technologies were being used and to identify an individual at each institution who could serve as an information resource for peer-to-peer questions. Results. Eighty-nine survey instruments were returned for a response rate of 75.4%. The resulting data illustrated the almost ubiquitous presence of educational technology. The most frequently used technology was course management systems and the least frequently used technology was microblogging. Conclusions. Educational technology use is trending toward fee-based products for enterprise-level applications and free, open-source products for collaboration and presentation. Educational technology is allowing educators to restructure classroom time for something other than simple transmission of factual information and to adopt an evidence-based approach to instructional innovation and reform. PMID:21829261

Educational technology use among US colleges and schools of pharmacy.

PubMed

Monaghan, Michael S; Cain, Jeff J; Malone, Patrick M; Chapman, Tracy A; Walters, Ryan W; Thompson, David C; Riedl, Steven T

2011-06-10

To develop a searchable database of educational technologies used at schools and colleges of pharmacy. A cross-sectional survey design was used to determine what educational technologies were being used and to identify an individual at each institution who could serve as an information resource for peer-to-peer questions. Eighty-nine survey instruments were returned for a response rate of 75.4%. The resulting data illustrated the almost ubiquitous presence of educational technology. The most frequently used technology was course management systems and the least frequently used technology was microblogging. Educational technology use is trending toward fee-based products for enterprise-level applications and free, open-source products for collaboration and presentation. Educational technology is allowing educators to restructure classroom time for something other than simple transmission of factual information and to adopt an evidence-based approach to instructional innovation and reform.

Evaluation of a Framework to Implement Electronic Health Record Systems Based on the openEHR Standard

NASA Astrophysics Data System (ADS)

Orellana, Diego A.; Salas, Alberto A.; Solarz, Pablo F.; Medina Ruiz, Luis; Rotger, Viviana I.

2016-04-01

The production of clinical information about each patient is constantly increasing, and it is noteworthy that the information is created in different formats and at diverse points of care, resulting in fragmented, incomplete, inaccurate and isolated, health information. The use of health information technology has been promoted as having a decisive impact to improve the efficiency, cost-effectiveness, quality and safety of medical care delivery. However in developing countries the utilization of health information technology is insufficient and lacking of standards among other situations. In the present work we evaluate the framework EHRGen, based on the openEHR standard, as mean to reach generation and availability of patient centered information. The framework has been evaluated through the provided tools for final users, that is, without intervention of computer experts. It makes easier to adopt the openEHR ideas and provides an open source basis with a set of services, although some limitations in its current state conspire against interoperability and usability. However, despite the described limitations respect to usability and semantic interoperability, EHRGen is, at least regionally, a considerable step toward EHR adoption and interoperability, so that it should be supported from academic and administrative institutions.

Implementation of an open adoption research data management system for clinical studies.

PubMed

Müller, Jan; Heiss, Kirsten Ingmar; Oberhoffer, Renate

2017-07-06

Research institutions need to manage multiple studies with individual data sets, processing rules and different permissions. So far, there is no standard technology that provides an easy to use environment to create databases and user interfaces for clinical trials or research studies. Therefore various software solutions are being used-from custom software, explicitly designed for a specific study, to cost intensive commercial Clinical Trial Management Systems (CTMS) up to very basic approaches with self-designed Microsoft ® databases. The technology applied to conduct those studies varies tremendously from study to study, making it difficult to evaluate data across various studies (meta-analysis) and keeping a defined level of quality in database design, data processing, displaying and exporting. Furthermore, the systems being used to collect study data are often operated redundantly to systems used in patient care. As a consequence the data collection in studies is inefficient and data quality may suffer from unsynchronized datasets, non-normalized database scenarios and manually executed data transfers. With OpenCampus Research we implemented an open adoption software (OAS) solution on an open source basis, which provides a standard environment for state-of-the-art research database management at low cost.

Enabling technologies for fiber optic sensing

NASA Astrophysics Data System (ADS)

Ibrahim, Selwan K.; Farnan, Martin; Karabacak, Devrez M.; Singer, Johannes M.

2016-04-01

In order for fiber optic sensors to compete with electrical sensors, several critical parameters need to be addressed such as performance, cost, size, reliability, etc. Relying on technologies developed in different industrial sectors helps to achieve this goal in a more efficient and cost effective way. FAZ Technology has developed a tunable laser based optical interrogator based on technologies developed in the telecommunication sector and optical transducer/sensors based on components sourced from the automotive market. Combining Fiber Bragg Grating (FBG) sensing technology with the above, high speed, high precision, reliable quasi distributed optical sensing systems for temperature, pressure, acoustics, acceleration, etc. has been developed. Careful design needs to be considered to filter out any sources of measurement drifts/errors due to different effects e.g. polarization and birefringence, coating imperfections, sensor packaging etc. Also to achieve high speed and high performance optical sensing systems, combining and synchronizing multiple optical interrogators similar to what has been used with computer/processors to deliver super computing power is an attractive solution. This path can be achieved by using photonic integrated circuit (PIC) technology which opens the doors to scaling up and delivering powerful optical sensing systems in an efficient and cost effective way.

Measuring Methane from Cars, Ships, Airplanes, Helicopters and Drones Using High-Speed Open-Path Technology

NASA Astrophysics Data System (ADS)

Burba, George; Anderson, Tyler; Biraud, Sebastien; Caulton, Dana; von Fischer, Joe; Gioli, Beniamino; Hanson, Chad; Ham, Jay; Kohnert, Katrin; Larmanou, Eric; Levy, Peter; Polidori, Andrea; Pikelnaya, Olga; Sachs, Torsten; Serafimovich, Andrei; Zaldei, Alessandro; Zondlo, Mark; Zulueta, Rommel

2017-04-01

Methane plays a critical role in the radiation balance, chemistry of the atmosphere, and air quality. The major anthropogenic sources of methane include oil and gas development sites, natural gas distribution networks, landfill emissions, and agricultural production. The majority of oil and gas and urban methane emission occurs via variable-rate point sources or diffused spots in topographically challenging terrains (e.g., street tunnels, elevated locations at water treatment plants, vents, etc.). Locating and measuring such methane emissions is challenging when using traditional micrometeorological techniques, and requires development of novel approaches. Landfill methane emissions traditionally assessed at monthly or longer time intervals are subject to large uncertainties because of the snapshot nature of the measurements and the barometric pumping phenomenon. The majority of agricultural and natural methane production occurs in areas with little infrastructure or easily available grid power (e.g., rice fields, arctic and boreal wetlands, tropical mangroves, etc.). A lightweight, high-speed, high-resolution, open-path technology was recently developed for eddy covariance measurements of methane flux, with power consumption 30-150 times below other available technologies. It was designed to run on solar panels or a small generator and be placed in the middle of the methane-producing ecosystem without a need for grid power. Lately, this instrumentation has been utilized increasingly more frequently outside of the traditional use on stationary flux towers. These novel approaches include measurements from various moving platforms, such as cars, aircraft, and ships. Projects included mapping of concentrations and vertical profiles, leak detection and quantification, mobile emission detection from natural gas-powered cars, soil methane flux surveys, etc. This presentation will describe the latest state of the key projects utilizing the novel lightweight low-power high-resolution open-path technology, and will highlight several novel approaches where such instrumentation was used in mobile deployments in urban, agricultural and natural environments by academic institutions, regulatory agencies and industry.

Mobile Measurements of Methane Using High-Speed Open-Path Technology

NASA Astrophysics Data System (ADS)

Burba, G. G.; Anderson, T.; Ediger, K.; von Fischer, J.; Gioli, B.; Ham, J. M.; Hupp, J. R.; Kohnert, K.; Levy, P. E.; Polidori, A.; Pikelnaya, O.; Price, E.; Sachs, T.; Serafimovich, A.; Zondlo, M. A.; Zulueta, R. C.

2016-12-01

Methane plays a critical role in the radiation balance, chemistry of the atmosphere, and air quality. The major anthropogenic sources of CH4 include oil and gas development sites, natural gas distribution networks, landfill emissions, and agricultural production. The majority of oil and gas and urban CH4 emission occurs via variable-rate point sources or diffused spots in topographically challenging terrains (e.g., street tunnels, elevated locations at water treatment plants, vents, etc.). Locating and measuring such CH4 emissions is challenging when using traditional micrometeorological techniques, and requires development of novel approaches. Landfill CH4 emissions traditionally assessed at monthly or longer time intervals are subject to large uncertainties because of the snapshot nature of the measurements and the barometric pumping phenomenon. The majority of agricultural and natural CH4 production occurs in areas with little infrastructure or easily available grid power (e.g., rice fields, arctic and boreal wetlands, tropical mangroves, etc.). A lightweight, high-speed, high-resolution, open-path technology was recently developed for eddy covariance measurements of CH4 flux, with power consumption 30-150 times below other available technologies. It was designed to run on solar panels or a small generator and be placed in the middle of the methane-producing ecosystem without a need for grid power. Lately, this instrumentation has been utilized increasingly more frequently outside of the traditional use on stationary flux towers. These novel approaches include measurements from various moving platforms, such as cars, aircraft, and ships. Projects included mapping of concentrations and vertical profiles, leak detection and quantification, mobile emission detection from natural gas-powered cars, soil CH4 flux surveys, etc. This presentation will describe key projects utilizing the novel lightweight low-power high-resolution open-path technology, and will highlight several novel approaches where such instrumentation was used in mobile deployments in urban, agricultural and natural environments by academic institutions, regulatory agencies and industry.

Using open source data for flood risk mapping and management in Brazil

NASA Astrophysics Data System (ADS)

Whitley, Alison; Malloy, James; Chirouze, Manuel

2013-04-01

Whitley, A., Malloy, J. and Chirouze, M. Worldwide the frequency and severity of major natural disasters, particularly flooding, has increased. Concurrently, countries such as Brazil are experiencing rapid socio-economic development with growing and increasingly concentrated populations, particularly in urban areas. Hence, it is unsurprising that Brazil has experienced a number of major floods in the past 30 years such as the January 2011 floods which killed 900 people and resulted in significant economic losses of approximately 1 billion US dollars. Understanding, mitigating against and even preventing flood risk is high priority. There is a demand for flood models in many developing economies worldwide for a range of uses including risk management, emergency planning and provision of insurance solutions. However, developing them can be expensive. With an increasing supply of freely-available, open source data, the costs can be significantly reduced, making the tools required for natural hazard risk assessment more accessible. By presenting a flood model developed for eight urban areas of Brazil as part of a collaboration between JBA Risk Management and Guy Carpenter, we explore the value of open source data and demonstrate its usability in a business context within the insurance industry. We begin by detailing the open source data available and compare its suitability to commercially-available equivalents for datasets including digital terrain models and river gauge records. We present flood simulation outputs in order to demonstrate the impact of the choice of dataset on the results obtained and its use in a business context. Via use of the 2D hydraulic model JFlow+, our examples also show how advanced modelling techniques can be used on relatively crude datasets to obtain robust and good quality results. In combination with accessible, standard specification GPU technology and open source data, use of JFlow+ has enabled us to produce large-scale hazard maps suitable for business use and emergency planning such as those we show for Brazil.

Vision Based Autonomous Robotic Control for Advanced Inspection and Repair

NASA Technical Reports Server (NTRS)

Wehner, Walter S.

2014-01-01

The advanced inspection system is an autonomous control and analysis system that improves the inspection and remediation operations for ground and surface systems. It uses optical imaging technology with intelligent computer vision algorithms to analyze physical features of the real-world environment to make decisions and learn from experience. The advanced inspection system plans to control a robotic manipulator arm, an unmanned ground vehicle and cameras remotely, automatically and autonomously. There are many computer vision, image processing and machine learning techniques available as open source for using vision as a sensory feedback in decision-making and autonomous robotic movement. My responsibilities for the advanced inspection system are to create a software architecture that integrates and provides a framework for all the different subsystem components; identify open-source algorithms and techniques; and integrate robot hardware.

Harvest: a web-based biomedical data discovery and reporting application development platform.

PubMed

Italia, Michael J; Pennington, Jeffrey W; Ruth, Byron; Wrazien, Stacey; Loutrel, Jennifer G; Crenshaw, E Bryan; Miller, Jeffrey; White, Peter S

2013-01-01

Biomedical researchers share a common challenge of making complex data understandable and accessible. This need is increasingly acute as investigators seek opportunities for discovery amidst an exponential growth in the volume and complexity of laboratory and clinical data. To address this need, we developed Harvest, an open source framework that provides a set of modular components to aid the rapid development and deployment of custom data discovery software applications. Harvest incorporates visual representations of multidimensional data types in an intuitive, web-based interface that promotes a real-time, iterative approach to exploring complex clinical and experimental data. The Harvest architecture capitalizes on standards-based, open source technologies to address multiple functional needs critical to a research and development environment, including domain-specific data modeling, abstraction of complex data models, and a customizable web client.

Using Kepler for Tool Integration in Microarray Analysis Workflows.

PubMed

Gan, Zhuohui; Stowe, Jennifer C; Altintas, Ilkay; McCulloch, Andrew D; Zambon, Alexander C

Increasing numbers of genomic technologies are leading to massive amounts of genomic data, all of which requires complex analysis. More and more bioinformatics analysis tools are being developed by scientist to simplify these analyses. However, different pipelines have been developed using different software environments. This makes integrations of these diverse bioinformatics tools difficult. Kepler provides an open source environment to integrate these disparate packages. Using Kepler, we integrated several external tools including Bioconductor packages, AltAnalyze, a python-based open source tool, and R-based comparison tool to build an automated workflow to meta-analyze both online and local microarray data. The automated workflow connects the integrated tools seamlessly, delivers data flow between the tools smoothly, and hence improves efficiency and accuracy of complex data analyses. Our workflow exemplifies the usage of Kepler as a scientific workflow platform for bioinformatics pipelines.

An emerging role: the nurse content curator.

PubMed

Brooks, Beth A

2015-01-01

A new phenomenon, the inverted or "flipped" classroom, assumes that students are no longer acquiring knowledge exclusively through textbooks or lectures. Instead, they are seeking out the vast amount of free information available to them online (the very essence of open source) to supplement learning gleaned in textbooks and lectures. With so much open-source content available to nursing faculty, it benefits the faculty to use readily available, technologically advanced content. The nurse content curator supports nursing faculty in its use of such content. Even more importantly, the highly paid, time-strapped faculty is not spending an inordinate amount of effort surfing for and evaluating content. The nurse content curator does that work, while the faculty uses its time more effectively to help students vet the truth, make meaning of the content, and learn to problem-solve. Brooks. © 2014 Wiley Periodicals, Inc.

Open-source mobile digital platform for clinical trial data collection in low-resource settings.

PubMed

van Dam, Joris; Omondi Onyango, Kevin; Midamba, Brian; Groosman, Nele; Hooper, Norman; Spector, Jonathan; Pillai, Goonaseelan Colin; Ogutu, Bernhards

2017-02-01

Governments, universities and pan-African research networks are building durable infrastructure and capabilities for biomedical research in Africa. This offers the opportunity to adopt from the outset innovative approaches and technologies that would be challenging to retrofit into fully established research infrastructures such as those regularly found in high-income countries. In this context we piloted the use of a novel mobile digital health platform, designed specifically for low-resource environments, to support high-quality data collection in a clinical research study. Our primary aim was to assess the feasibility of a using a mobile digital platform for clinical trial data collection in a low-resource setting. Secondarily, we sought to explore the potential benefits of such an approach. The investigative site was a research institute in Nairobi, Kenya. We integrated an open-source platform for mobile data collection commonly used in the developing world with an open-source, standard platform for electronic data capture in clinical trials. The integration was developed using common data standards (Clinical Data Interchange Standards Consortium (CDISC) Operational Data Model), maximising the potential to extend the approach to other platforms. The system was deployed in a pharmacokinetic study involving healthy human volunteers. The electronic data collection platform successfully supported conduct of the study. Multidisciplinary users reported high levels of satisfaction with the mobile application and highlighted substantial advantages when compared with traditional paper record systems. The new system also demonstrated a potential for expediting data quality review. This pilot study demonstrated the feasibility of using a mobile digital platform for clinical research data collection in low-resource settings. Sustainable scientific capabilities and infrastructure are essential to attract and support clinical research studies. Since many research structures in Africa are being developed anew, stakeholders should consider implementing innovative technologies and approaches.

40 CFR Table 3 to Subpart Wwww of... - Organic HAP Emissions Limits for Existing Open Molding Sources, New Open Molding Sources Emitting...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Existing Open Molding Sources, New Open Molding Sources Emitting Less Than 100 TPY of HAP, and New and... CATEGORIES National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites... Existing Open Molding Sources, New Open Molding Sources Emitting Less Than 100 TPY of HAP, and New and...

OpenID connect as a security service in Cloud-based diagnostic imaging systems

NASA Astrophysics Data System (ADS)

Ma, Weina; Sartipi, Kamran; Sharghi, Hassan; Koff, David; Bak, Peter

2015-03-01

The evolution of cloud computing is driving the next generation of diagnostic imaging (DI) systems. Cloud-based DI systems are able to deliver better services to patients without constraining to their own physical facilities. However, privacy and security concerns have been consistently regarded as the major obstacle for adoption of cloud computing by healthcare domains. Furthermore, traditional computing models and interfaces employed by DI systems are not ready for accessing diagnostic images through mobile devices. RESTful is an ideal technology for provisioning both mobile services and cloud computing. OpenID Connect, combining OpenID and OAuth together, is an emerging REST-based federated identity solution. It is one of the most perspective open standards to potentially become the de-facto standard for securing cloud computing and mobile applications, which has ever been regarded as "Kerberos of Cloud". We introduce OpenID Connect as an identity and authentication service in cloud-based DI systems and propose enhancements that allow for incorporating this technology within distributed enterprise environment. The objective of this study is to offer solutions for secure radiology image sharing among DI-r (Diagnostic Imaging Repository) and heterogeneous PACS (Picture Archiving and Communication Systems) as well as mobile clients in the cloud ecosystem. Through using OpenID Connect as an open-source identity and authentication service, deploying DI-r and PACS to private or community clouds should obtain equivalent security level to traditional computing model.

Energy Sources and Systems Analysis: 40 South Lincoln Redevelopment District (Full Report)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2011-08-01

This report presents the results of a case study to analyze district energy systems for their potential use in a project that involves redeveloping 270 units of existing public housing, along with other nearby sites. When complete, the redevelopment project will encompass more than 900 mixed-income residential units, commercial and retail properties, and open space. The analysis estimated the hourly heating, cooling, domestic hot water, and electric loads required by the community; investigated potential district system technologies to meet those needs; and researched available fuel sources to power such systems.

NASA World Wind: Infrastructure for Spatial Data

NASA Technical Reports Server (NTRS)

Hogan, Patrick

2011-01-01

The world has great need for analysis of Earth observation data, be it climate change, carbon monitoring, disaster response, national defense or simply local resource management. To best provide for spatial and time-dependent information analysis, the world benefits from an open standards and open source infrastructure for spatial data. In the spirit of NASA's motto "for the benefit of all" NASA invites the world community to collaboratively advance this core technology. The World Wind infrastructure for spatial data both unites and challenges the world for innovative solutions analyzing spatial data while also allowing absolute command and control over any respective information exchange medium.

Open source modular ptosis crutch for the treatment of myasthenia gravis.

PubMed

Saidi, Trust; Sivarasu, Sudesh; Douglas, Tania S

2018-02-01

Pharmacologic treatment of Myasthenia Gravis presents challenges due to poor tolerability in some patients. Conventional ptosis crutches have limitations such as interference with blinking which causes ocular surface drying, and frequent irritation of the eyes. To address this problem, a modular and adjustable ptosis crutch for elevating the upper eyelid in Myasthenia Gravis patients has been proposed as a non-surgical and low-cost solution. Areas covered: This paper reviews the literature on the challenges in the treatment of Myasthenia Gravis globally and focuses on a modular and adjustable ptosis crutch that has been developed by the Medical Device Laboratory at the University of Cape Town. Expert commentary: The new medical device has potential as a simple, effective and unobtrusive solution to elevate the drooping upper eyelid(s) above the visual axis without the need for medication and surgery. Access to the technology is provided through an open source platform which makes it available globally. Open access provides opportunities for further open innovation to address the current limitations of the device, ultimately for the benefit not only of people suffering from Myasthenia Gravis but also of those with ptosis from other aetiologies.

Review of Maintenance and Repair Times for Components in Technological Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

L. C. Cadwallader

2012-11-01

This report is a compilation of some unique component repair time data and it also presents citations of more extensive reports where lists of repair times can be found. This collection of information should support analysts who seek to quantify maintainability and availability of high technology and nuclear energy production systems. While there are newer sources of repair time information, most, if not all, of the newer sources are proprietary and cannot be shared. This report offers data that, while older, is openly accessible and can serve as reasonable estimates of repair times, at least for initial studies. Some timesmore » were found for maintenance times in radiation environments, and some guidance for multiplicative factors to use to account for work in contamination areas.« less

Experience of public procurement of Open Compute servers

NASA Astrophysics Data System (ADS)

Bärring, Olof; Guerri, Marco; Bonfillou, Eric; Valsan, Liviu; Grigore, Alexandru; Dore, Vincent; Gentit, Alain; Clement, Benoît; Grossir, Anthony

2015-12-01

The Open Compute Project. OCP (http://www.opencompute.org/). was launched by Facebook in 2011 with the objective of building efficient computing infrastructures at the lowest possible cost. The technologies are released as open hardware. with the goal to develop servers and data centres following the model traditionally associated with open source software projects. In 2013 CERN acquired a few OCP servers in order to compare performance and power consumption with standard hardware. The conclusions were that there are sufficient savings to motivate an attempt to procure a large scale installation. One objective is to evaluate if the OCP market is sufficiently mature and broad enough to meet the constraints of a public procurement. This paper summarizes this procurement. which started in September 2014 and involved the Request for information (RFI) to qualify bidders and Request for Tender (RFT).

Enabling a systems biology knowledgebase with gaggle and firegoose

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baliga, Nitin S.

The overall goal of this project was to extend the existing Gaggle and Firegoose systems to develop an open-source technology that runs over the web and links desktop applications with many databases and software applications. This technology would enable researchers to incorporate workflows for data analysis that can be executed from this interface to other online applications. The four specific aims were to (1) provide one-click mapping of genes, proteins, and complexes across databases and species; (2) enable multiple simultaneous workflows; (3) expand sophisticated data analysis for online resources; and enhance open-source development of the Gaggle-Firegoose infrastructure. Gaggle is anmore » open-source Java software system that integrates existing bioinformatics programs and data sources into a user-friendly, extensible environment to allow interactive exploration, visualization, and analysis of systems biology data. Firegoose is an extension to the Mozilla Firefox web browser that enables data transfer between websites and desktop tools including Gaggle. In the last phase of this funding period, we have made substantial progress on development and application of the Gaggle integration framework. We implemented the workspace to the Network Portal. Users can capture data from Firegoose and save them to the workspace. Users can create workflows to start multiple software components programmatically and pass data between them. Results of analysis can be saved to the cloud so that they can be easily restored on any machine. We also developed the Gaggle Chrome Goose, a plugin for the Google Chrome browser in tandem with an opencpu server in the Amazon EC2 cloud. This allows users to interactively perform data analysis on a single web page using the R packages deployed on the opencpu server. The cloud-based framework facilitates collaboration between researchers from multiple organizations. We have made a number of enhancements to the cmonkey2 application to enable and improve the integration within different environments, and we have created a new tools pipeline for generating EGRIN2 models in a largely automated way.« less

Specification Patent Management for Web Application Platform Ecosystem

NASA Astrophysics Data System (ADS)

Fukami, Yoshiaki; Isshiki, Masao; Takeda, Hideaki; Ohmukai, Ikki; Kokuryo, Jiro

Diversified usage of web applications has encouraged disintegration of web platform into management of identification and applications. Users make use of various kinds of data linked to their identity with multiple applications on certain social web platforms such as Facebook or MySpace. There has emerged competition among web application platforms. Platformers can design relationship with developers by controlling patent of their own specification and adopt open technologies developed external organizations. Platformers choose a way to open according to feature of the specification and their position. Patent management of specification come to be a key success factor to build competitive web application platforms. Each way to attract external developers such as standardization, open source has not discussed and analyzed all together.

Development of an Innovative Interactive Virtual Classroom System for K-12 Education Using Google App Engine

ERIC Educational Resources Information Center

Mumba, Frackson; Zhu, Mengxia

2013-01-01

This paper presents a Simulation-based interactive Virtual ClassRoom web system (SVCR: www.vclasie.com) powered by the state-of-the-art cloud computing technology from Google SVCR integrates popular free open-source math, science and engineering simulations and provides functions such as secure user access control and management of courses,…

Computers in Libraries, 2000: Proceedings (15th, Washington, D.C., March 15-17, 2000).

ERIC Educational Resources Information Center

Nixon, Carol, Comp.; Burmood, Jennifer, Comp.

Topics of the Proceedings of the 15th Annual Computers in Libraries Conference (March 15-17, 2000) include: Linux and open source software in an academic library; a Master Trainer Program; what educators need to know about multimedia and copyright; how super searchers find business information online; managing print costs; new technologies in wide…

Enhancing Learning Outcomes through Experiential Learning: Using Open-Source Systems to Teach Enterprise Systems and Business Process Management

ERIC Educational Resources Information Center

Jewer, Jennifer; Evermann, Joerg

2015-01-01

Enterprise systems and business process management are the two key information technologies to integrate the functions of a modern business into a coherent and efficient system. While the benefits of these systems are easy to describe, students, especially those without business experience, have difficulty appreciating how these systems are used…

Next Generation Astronomical Data Processing using Big Data Technologies from the Apache Software Foundation

NASA Astrophysics Data System (ADS)

Mattmann, Chris

2014-04-01

In this era of exascale instruments for astronomy we must naturally develop next generation capabilities for the unprecedented data volume and velocity that will arrive due to the veracity of these ground-based sensor and observatories. Integrating scientific algorithms stewarded by scientific groups unobtrusively and rapidly; intelligently selecting data movement technologies; making use of cloud computing for storage and processing; and automatically extracting text and metadata and science from any type of file are all needed capabilities in this exciting time. Our group at NASA JPL has promoted the use of open source data management technologies available from the Apache Software Foundation (ASF) in pursuit of constructing next generation data management and processing systems for astronomical instruments including the Expanded Very Large Array (EVLA) in Socorro, NM and the Atacama Large Milimetre/Sub Milimetre Array (ALMA); as well as for the KAT-7 project led by SKA South Africa as a precursor to the full MeerKAT telescope. In addition we are funded currently by the National Science Foundation in the US to work with MIT Haystack Observatory and the University of Cambridge in the UK to construct a Radio Array of Portable Interferometric Devices (RAPID) that will undoubtedly draw from the rich technology advances underway. NASA JPL is investing in a strategic initiative for Big Data that is pulling in these capabilities and technologies for astronomical instruments and also for Earth science remote sensing. In this talk I will describe the above collaborative efforts underway and point to solutions in open source from the Apache Software Foundation that can be deployed and used today and that are already bringing our teams and projects benefits. I will describe how others can take advantage of our experience and point towards future application and contribution of these tools.

Towards a new generation of agricultural system data, models and knowledge products: Information and communication technology.

PubMed

Janssen, Sander J C; Porter, Cheryl H; Moore, Andrew D; Athanasiadis, Ioannis N; Foster, Ian; Jones, James W; Antle, John M

2017-07-01

Agricultural modeling has long suffered from fragmentation in model implementation. Many models are developed, there is much redundancy, models are often poorly coupled, model component re-use is rare, and it is frequently difficult to apply models to generate real solutions for the agricultural sector. To improve this situation, we argue that an open, self-sustained, and committed community is required to co-develop agricultural models and associated data and tools as a common resource. Such a community can benefit from recent developments in information and communications technology (ICT). We examine how such developments can be leveraged to design and implement the next generation of data, models, and decision support tools for agricultural production systems. Our objective is to assess relevant technologies for their maturity, expected development, and potential to benefit the agricultural modeling community. The technologies considered encompass methods for collaborative development and for involving stakeholders and users in development in a transdisciplinary manner. Our qualitative evaluation suggests that as an overall research challenge, the interoperability of data sources, modular granular open models, reference data sets for applications and specific user requirements analysis methodologies need to be addressed to allow agricultural modeling to enter in the big data era. This will enable much higher analytical capacities and the integrated use of new data sources. Overall agricultural systems modeling needs to rapidly adopt and absorb state-of-the-art data and ICT technologies with a focus on the needs of beneficiaries and on facilitating those who develop applications of their models. This adoption requires the widespread uptake of a set of best practices as standard operating procedures.

Integration of photovoltaic and concentrated solar thermal technologies for H2 production by the hybrid sulfur cycle

NASA Astrophysics Data System (ADS)

Liberatore, Raffaele; Ferrara, Mariarosaria; Lanchi, Michela; Turchetti, Luca

2017-06-01

It is widely agreed that hydrogen used as energy carrier and/or storage media may significantly contribute in the reduction of emissions, especially if produced by renewable energy sources. The Hybrid Sulfur (HyS) cycle is considered as one of the most promising processes to produce hydrogen through the water-splitting process. The FP7 project SOL2HY2 (Solar to Hydrogen Hybrid Cycles) investigates innovative material and process solutions for the use of solar heat and power in the HyS process. A significant part of the SOL2HY2 project is devoted to the analysis and optimization of the integration of the solar and chemical (hydrogen production) plants. In this context, this work investigates the possibility to integrate different solar technologies, namely photovoltaic, solar central receiver and solar troughs, to optimize their use in the HyS cycle for a green hydrogen production, both in the open and closed process configurations. The analysis carried out accounts for different combinations of geographical location and plant sizing criteria. The use of a sulfur burner, which can serve both as thermal backup and SO2 source for the open cycle, is also considered.

Web Monitoring of EOS Front-End Ground Operations, Science Downlinks and Level 0 Processing

NASA Technical Reports Server (NTRS)

Cordier, Guy R.; Wilkinson, Chris; McLemore, Bruce

2008-01-01

This paper addresses the efforts undertaken and the technology deployed to aggregate and distribute the metadata characterizing the real-time operations associated with NASA Earth Observing Systems (EOS) high-rate front-end systems and the science data collected at multiple ground stations and forwarded to the Goddard Space Flight Center for level 0 processing. Station operators, mission project management personnel, spacecraft flight operations personnel and data end-users for various EOS missions can retrieve the information at any time from any location having access to the internet. The users are distributed and the EOS systems are distributed but the centralized metadata accessed via an external web server provide an effective global and detailed view of the enterprise-wide events as they are happening. The data-driven architecture and the implementation of applied middleware technology, open source database, open source monitoring tools, and external web server converge nicely to fulfill the various needs of the enterprise. The timeliness and content of the information provided are key to making timely and correct decisions which reduce project risk and enhance overall customer satisfaction. The authors discuss security measures employed to limit access of data to authorized users only.

The Application of the Open Pharmacological Concepts Triple Store (Open PHACTS) to Support Drug Discovery Research

PubMed Central

Ratnam, Joseline; Zdrazil, Barbara; Digles, Daniela; Cuadrado-Rodriguez, Emiliano; Neefs, Jean-Marc; Tipney, Hannah; Siebes, Ronald; Waagmeester, Andra; Bradley, Glyn; Chau, Chau Han; Richter, Lars; Brea, Jose; Evelo, Chris T.; Jacoby, Edgar; Senger, Stefan; Loza, Maria Isabel; Ecker, Gerhard F.; Chichester, Christine

2014-01-01

Integration of open access, curated, high-quality information from multiple disciplines in the Life and Biomedical Sciences provides a holistic understanding of the domain. Additionally, the effective linking of diverse data sources can unearth hidden relationships and guide potential research strategies. However, given the lack of consistency between descriptors and identifiers used in different resources and the absence of a simple mechanism to link them, gathering and combining relevant, comprehensive information from diverse databases remains a challenge. The Open Pharmacological Concepts Triple Store (Open PHACTS) is an Innovative Medicines Initiative project that uses semantic web technology approaches to enable scientists to easily access and process data from multiple sources to solve real-world drug discovery problems. The project draws together sources of publicly-available pharmacological, physicochemical and biomolecular data, represents it in a stable infrastructure and provides well-defined information exploration and retrieval methods. Here, we highlight the utility of this platform in conjunction with workflow tools to solve pharmacological research questions that require interoperability between target, compound, and pathway data. Use cases presented herein cover 1) the comprehensive identification of chemical matter for a dopamine receptor drug discovery program 2) the identification of compounds active against all targets in the Epidermal growth factor receptor (ErbB) signaling pathway that have a relevance to disease and 3) the evaluation of established targets in the Vitamin D metabolism pathway to aid novel Vitamin D analogue design. The example workflows presented illustrate how the Open PHACTS Discovery Platform can be used to exploit existing knowledge and generate new hypotheses in the process of drug discovery. PMID:25522365

A heterogeneous computing accelerated SCE-UA global optimization method using OpenMP, OpenCL, CUDA, and OpenACC.

PubMed

Kan, Guangyuan; He, Xiaoyan; Ding, Liuqian; Li, Jiren; Liang, Ke; Hong, Yang

2017-10-01

The shuffled complex evolution optimization developed at the University of Arizona (SCE-UA) has been successfully applied in various kinds of scientific and engineering optimization applications, such as hydrological model parameter calibration, for many years. The algorithm possesses good global optimality, convergence stability and robustness. However, benchmark and real-world applications reveal the poor computational efficiency of the SCE-UA. This research aims at the parallelization and acceleration of the SCE-UA method based on powerful heterogeneous computing technology. The parallel SCE-UA is implemented on Intel Xeon multi-core CPU (by using OpenMP and OpenCL) and NVIDIA Tesla many-core GPU (by using OpenCL, CUDA, and OpenACC). The serial and parallel SCE-UA were tested based on the Griewank benchmark function. Comparison results indicate the parallel SCE-UA significantly improves computational efficiency compared to the original serial version. The OpenCL implementation obtains the best overall acceleration results however, with the most complex source code. The parallel SCE-UA has bright prospects to be applied in real-world applications.

Open-tube diffusion techniques for InP/LnGaAs heterojunctior bipolar transistors

NASA Astrophysics Data System (ADS)

Schuitemaker, P.; Houston, P. A.

1986-11-01

Open-tube diffusion techniques used between 450 and 600° C are described which involve the supply of diffusant from a vapour source (via a solution) and a solid evaporated metal source. Investigations of Zn into InP and InGaAs(P) have been undertaken using both sources. SIMS profile analyses show that in the case of the vapour source the profiles indicate a concentration-dependent diffusion coefficient while the solid source diffusions can be well described by a Gaussian-type profile. The usefulness of the vapour source method has been demonstrated in the fabrication of bipolar transistors which exhibit good d.c. characteristics. The solid source method is limited by the slow diffusion velocity and more gradual profile. The InGaAs(P)/InP materials system has important applications in optical communications and future high speed microwave and switching devices. Useful technologies allied to the introduction of impurities into Si by diffusion, have gradually been emerging for use in the III-V semiconductor family. Closed tube systems1 have been used in order to contain the volatile group V species and prevent surface erosion. In addition, simpler open tube systems2,3 have been developed that maintain a sufficient overpressure of the group V element. Zn and Cd p-dopants have been studied extensively because of the volatility and relatively large diffusion rates in III-V semiconductors. Opentube diffusion into both InP and InGaAs2-6 has been studied but little detail has appeared concerning InGaAs and InGaAsP. In this paper we describe a comprehensive study of the diffusion of Zn into InP and InGaAs(P) using both open-tube vapour source and a Au/Zn/Au evaporated solid source with SiNx acting both as a mask and also an encapsulant to prevent loss of Zn and decomposition of the substrate material. The techniques have been successfully applied to the fabrication of InP/lnGaAs heterojunction bipolar transistors which show good dc characteristics. Reference to InGaAs in the text implies the InP lattice-matched composition In0.53Ga0.47As.

Brokered virtual hubs for facilitating access and use of geospatial Open Data

NASA Astrophysics Data System (ADS)

Mazzetti, Paolo; Latre, Miguel; Kamali, Nargess; Brumana, Raffaella; Braumann, Stefan; Nativi, Stefano

2016-04-01

Open Data is a major trend in current information technology scenario and it is often publicised as one of the pillars of the information society in the near future. In particular, geospatial Open Data have a huge potential also for Earth Sciences, through the enablement of innovative applications and services integrating heterogeneous information. However, open does not mean usable. As it was recognized at the very beginning of the Web revolution, many different degrees of openness exist: from simple sharing in a proprietary format to advanced sharing in standard formats and including semantic information. Therefore, to fully unleash the potential of geospatial Open Data, advanced infrastructures are needed to increase the data openness degree, enhancing their usability. In October 2014, the ENERGIC OD (European NEtwork for Redistributing Geospatial Information to user Communities - Open Data) project, funded by the European Union under the Competitiveness and Innovation framework Programme (CIP), has started. In response to the EU call, the general objective of the project is to "facilitate the use of open (freely available) geographic data from different sources for the creation of innovative applications and services through the creation of Virtual Hubs". The ENERGIC OD Virtual Hubs aim to facilitate the use of geospatial Open Data by lowering and possibly removing the main barriers which hampers geo-information (GI) usage by end-users and application developers. Data and services heterogeneity is recognized as one of the major barriers to Open Data (re-)use. It imposes end-users and developers to spend a lot of effort in accessing different infrastructures and harmonizing datasets. Such heterogeneity cannot be completely removed through the adoption of standard specifications for service interfaces, metadata and data models, since different infrastructures adopt different standards to answer to specific challenges and to address specific use-cases. Thus, beyond a certain extent, heterogeneity is irreducible especially in interdisciplinary contexts. ENERGIC OD Virtual Hubs address heterogeneity adopting a mediation and brokering approach: specific components (brokers) are dedicated to harmonize service interfaces, metadata and data models, enabling seamless discovery and access to heterogeneous infrastructures and datasets. As an innovation project, ENERGIC OD integrates several existing technologies to implement Virtual Hubs as single points of access to geospatial datasets provided by new or existing platforms and infrastructures, including INSPIRE-compliant systems and Copernicus services. A first version of the ENERGIC OD brokers has been implemented based on the GI-Suite Brokering Framework developed by CNR-IIA, and complemented with other tools under integration and development. It already enables mediated discovery and harmonized access to different geospatial Open Data sources. It is accessible by users as Software-as-a-Service through a browser. Moreover, open APIs and a Javascript library are available for application developers. Six ENERGIC OD Virtual Hubs have been currently deployed: one at regional level (Berlin metropolitan area) and five at national-level (in France, Germany, Italy, Poland and Spain). Each Virtual Hub manager decided the deployment strategy (local infrastructure or commercial Infrastructure-as-a-Service cloud), and the list of connected Open Data sources. The ENERGIC OD Virtual Hubs are under test and validation through the development of ten different mobile and Web applications.

The Emergence of Open-Source Software in China

ERIC Educational Resources Information Center

Pan, Guohua; Bonk, Curtis J.

2007-01-01

The open-source software movement is gaining increasing momentum in China. Of the limited numbers of open-source software in China, "Red Flag Linux" stands out most strikingly, commanding 30 percent share of Chinese software market. Unlike the spontaneity of open-source movement in North America, open-source software development in…

A Study of Clinically Related Open Source Software Projects

PubMed Central

Hogarth, Michael A.; Turner, Stuart

2005-01-01

Open source software development has recently gained significant interest due to several successful mainstream open source projects. This methodology has been proposed as being similarly viable and beneficial in the clinical application domain as well. However, the clinical software development venue differs significantly from the mainstream software venue. Existing clinical open source projects have not been well characterized nor formally studied so the ‘fit’ of open source in this domain is largely unknown. In order to better understand the open source movement in the clinical application domain, we undertook a study of existing open source clinical projects. In this study we sought to characterize and classify existing clinical open source projects and to determine metrics for their viability. This study revealed several findings which we believe could guide the healthcare community in its quest for successful open source clinical software projects. PMID:16779056

Open Source GIS based integrated watershed management

NASA Astrophysics Data System (ADS)

Byrne, J. M.; Lindsay, J.; Berg, A. A.

2013-12-01

Optimal land and water management to address future and current resource stresses and allocation challenges requires the development of state-of-the-art geomatics and hydrological modelling tools. Future hydrological modelling tools should be of high resolution, process based with real-time capability to assess changing resource issues critical to short, medium and long-term enviromental management. The objective here is to merge two renowned, well published resource modeling programs to create an source toolbox for integrated land and water management applications. This work will facilitate a much increased efficiency in land and water resource security, management and planning. Following an 'open-source' philosophy, the tools will be computer platform independent with source code freely available, maximizing knowledge transfer and the global value of the proposed research. The envisioned set of water resource management tools will be housed within 'Whitebox Geospatial Analysis Tools'. Whitebox, is an open-source geographical information system (GIS) developed by Dr. John Lindsay at the University of Guelph. The emphasis of the Whitebox project has been to develop a user-friendly interface for advanced spatial analysis in environmental applications. The plugin architecture of the software is ideal for the tight-integration of spatially distributed models and spatial analysis algorithms such as those contained within the GENESYS suite. Open-source development extends knowledge and technology transfer to a broad range of end-users and builds Canadian capability to address complex resource management problems with better tools and expertise for managers in Canada and around the world. GENESYS (Generate Earth Systems Science input) is an innovative, efficient, high-resolution hydro- and agro-meteorological model for complex terrain watersheds developed under the direction of Dr. James Byrne. GENESYS is an outstanding research and applications tool to address challenging resource management issues in industry, government and nongovernmental agencies. Current research and analysis tools were developed to manage meteorological, climatological, and land and water resource data efficiently at high resolution in space and time. The deliverable for this work is a Whitebox-GENESYS open-source resource management capacity with routines for GIS based watershed management including water in agriculture and food production. We are adding urban water management routines through GENESYS in 2013-15 with an engineering PhD candidate. Both Whitebox-GAT and GENESYS are already well-established tools. The proposed research will combine these products to create an open-source geomatics based water resource management tool that is revolutionary in both capacity and availability to a wide array of Canadian and global users

Use of Free/Libre Open Source Software in Sepsis "-Omics" Research: A Bibliometric, Comparative Analysis Among the United States, EU-28 Member States, and China.

PubMed

Evangelatos, Nikolaos; Satyamourthy, Kapaettu; Levidou, Georgia; Brand, Helmut; Bauer, Pia; Kouskouti, Christina; Brand, Angela

2018-05-01

"-Omics" systems sciences are at the epicenter of personalized medicine and public health, and drivers of knowledge-based biotechnology innovation. Bioinformatics, a core component of omics research, is one of the disciplines that first employed Free/Libre Open Source Software (FLOSS), and thus provided a fertile ground for its further development. Understanding the use and characteristics of FLOSS deployed in the omics field is valuable for future innovation strategies, policy and funding priorities. We conducted a bibliometric, longitudinal study of the use of FLOSS in sepsis omics research from 2011 to 2015 in the United States, EU-28 and China. Because sepsis is an interdisciplinary field at the intersection of multiple omics technologies and medical specialties, it was chosen as a model innovation ecosystem for this empirical analysis, which used publicly available data. Despite development of and competition from proprietary commercial software, scholars in omics continue to employ FLOSS routinely, and independent of the type of omics technology they work with. The number of articles using FLOSS increased significantly over time in the EU-28, as opposed to the United States and China (R = 0.96, p = 0.004). Furthermore, in an era where sharing of knowledge is being strongly advocated and promoted by public agencies and social institutions, we discuss possible correlations between the use of FLOSS and various funding sources in omics research. These observations and analyses provide new insights into the use of FLOSS in sepsis omics research across three (supra)national regions. Further benchmarking studies are warranted for FLOSS trends in other omics fields and geographical settings. These could, in time, lead to the development of new composite innovation and technology use metrics in omics systems sciences and bioinformatics communities.

Do It Yourself (DIY) Earth Science Collaboratories Using Best Practices and Breakthrough Technologies

NASA Astrophysics Data System (ADS)

Stephan, E.

2017-12-01

The objective of published earth science study data results and literature on the Web should be to provide a means to integrate discoverable science resources through an open collaborative-Web. At the core of any open science collaborative infrastructure is the ability to discover, manage and ultimately use relevant data accessible to the collaboration. Equally important are the relationships between people, applications, services, and publications, which capture critical contextual knowledge that enable their effective use. While contributions of either irreproducible or costly data can be a great asset the inability of users being able to use the data intelligently or make sense of it, makes these investments not usable. An ability to describe ad-hoc discoverable usage methodologies, provide feedback to data producers, and identify and cite data in a systematic way by leveraging existing Web-enabled off the shelf technology is needed. Fortunately many break-through advancements in data publication best practices and government, open source, and commercial investments support consumers who can provide feedback, share experiences, and contribute back to the earth science ecosystem.

Solving a Health Information Management Problem. An international success story.

PubMed

Hannan, Terry J

2015-01-01

The management of health care delivery requires the availability of effective 'information management' tools based on e-technologies [eHealth]. In developed economies many of these 'tools' are readily available whereas in Low and Middle Income Countries (LMIC) there is limited access to eHealth technologies and this has been defined as the "digital divide". This paper provides a short introduction to the fundamental understanding of what is meant by information management in health care and how it applies to all social economies. The core of the paper describes the successful implementation of appropriate information management tools in a resource poor environment to manage the HIV/AIDS epidemic and other disease states, in sub-Saharan Africa and how the system has evolved to become the largest open source eHealth project in the world and become the health information infrastructure for several national eHealth economies. The system is known as Open MRS [www.openmrs.org). The continuing successful evolution of the OpenMRS project has permitted its key implementers to define core factors that are the foundations for successful eHealth projects.

Open Access, Open Source and Digital Libraries: A Current Trend in University Libraries around the World

ERIC Educational Resources Information Center

Krishnamurthy, M.

2008-01-01

Purpose: The purpose of this paper is to describe the open access and open source movement in the digital library world. Design/methodology/approach: A review of key developments in the open access and open source movement is provided. Findings: Open source software and open access to research findings are of great use to scholars in developing…

The Wildland Fire Emissions Information System: Providing information for carbon cycle studies with open source geospatial tools

NASA Astrophysics Data System (ADS)

French, N. H.; Erickson, T.; McKenzie, D.

2008-12-01

A major goal of the North American Carbon Program is to resolve uncertainties in understanding and managing the carbon cycle of North America. As carbon modeling tools become more comprehensive and spatially oriented, accurate datasets to spatially quantify carbon emissions from fire are needed, and these data resources need to be accessible to users for decision-making. Under a new NASA Carbon Cycle Science project, Drs. Nancy French and Tyler Erickson, of the Michigan Technological University, Michigan Tech Research Institute (MTRI), are teaming with specialists with the USDA Forest Service Fire and Environmental Research Applications (FERA) team to provide information for mapping fire-derived carbon emissions to users. The project focus includes development of a web-based system to provide spatially resolved fire emissions estimates for North America in a user-friendly environment. The web-based Decision Support System will be based on a variety of open source technologies. The Fuel Characteristic Classification System (FCCS) raster map of fuels and MODIS-derived burned area vector maps will be processed using the Geographic Data Abstraction Library (GDAL) and OGR Simple Features Library. Tabular and spatial project data will be stored in a PostgreSQL/PostGIS, a spatially enabled relational database server. The browser-based user interface will be created using the Django web page framework to allow user input for the decision support system. The OpenLayers mapping framework will be used to provide users with interactive maps within the browser. In addition, the data products will be made available in standard open data formats such as KML, to allow for easy integration into other spatial models and data systems.

GIS Technologies For The New Planetary Science Archive (PSA)

NASA Astrophysics Data System (ADS)

Docasal, R.; Barbarisi, I.; Rios, C.; Macfarlane, A. J.; Gonzalez, J.; Arviset, C.; De Marchi, G.; Martinez, S.; Grotheer, E.; Lim, T.; Besse, S.; Heather, D.; Fraga, D.; Barthelemy, M.

2015-12-01

Geographical information system (GIS) is becoming increasingly used for planetary science. GIS are computerised systems for the storage, retrieval, manipulation, analysis, and display of geographically referenced data. Some data stored in the Planetary Science Archive (PSA), for instance, a set of Mars Express/Venus Express data, have spatial metadata associated to them. To facilitate users in handling and visualising spatial data in GIS applications, the new PSA should support interoperability with interfaces implementing the standards approved by the Open Geospatial Consortium (OGC). These standards are followed in order to develop open interfaces and encodings that allow data to be exchanged with GIS Client Applications, well-known examples of which are Google Earth and NASA World Wind as well as open source tools such as Openlayers. The technology already exists within PostgreSQL databases to store searchable geometrical data in the form of the PostGIS extension. An existing open source maps server is GeoServer, an instance of which has been deployed for the new PSA, uses the OGC standards to allow, among others, the sharing, processing and editing of data and spatial data through the Web Feature Service (WFS) standard as well as serving georeferenced map images through the Web Map Service (WMS). The final goal of the new PSA, being developed by the European Space Astronomy Centre (ESAC) Science Data Centre (ESDC), is to create an archive which enables science exploitation of ESA's planetary missions datasets. This can be facilitated through the GIS framework, offering interfaces (both web GUI and scriptable APIs) that can be used more easily and scientifically by the community, and that will also enable the community to build added value services on top of the PSA.

The use and role of open source software applications in public and not-for-profit hospitals in the United States.

PubMed

Vest, Joshua R; Stephens, James H

2013-01-01

The potential cost savings and customizability of open source software (OSS) may be particularly attractive for hospitals. However, numerous health-care-specific OSS applications exist, the adoption of OSS health information technology (HIT) applications is not widespread in the United States. This disconnect between the availability of promising software and low adoption raises the basic question: If OSS HIT is so advantageous, why are more health care organizations not using it? We interviewed the chief information officer, or equivalent position, at 17 not-for-profit and public hospitals across the United States. Through targeted recruitment, our sample included nine hospitals using OSS HIT and eight hospitals not using OSS HIT. The open-ended interview questions were guided by domains included in the fit-viability theory, an organizational-level innovation adoption framework, and those suggested by a review of the literature. Transcripts were analyzed using an inductive and comparative approach, which involved an open coding for relevant themes. Interviews described the state of OSS use in hospitals. Specifically, general OSS applications were widely used by IT professionals. In addition, hospitals using OSS HIT still relied heavily on vendor support. In terms of why decisions arose to use OSS HIT, several hospitals using OSS HIT noted the cost advantages. In contrast, hospitals avoiding OSS HIT were clear, OSS as a class did not fit with clinical work and posed too much risk. Perceptions of OSS HIT ranged from enthusiastic embracement to resigned adoption, to refusal, to abandonment. Some organizations were achieving success with their OSS HIT choices, but they still relied on vendors for significant support. The decision to adopt OSS HIT was not uniform but contingent upon views of the risk posed by the technology, economic factors, and the hospital's existing capabilities.

The Proliferation of Unmanned Aerial Vehicles: Terrorist Use, Capability, and Strategic Implications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ball, Ryan Jokl

There has been unparalleled proliferation and technological advancement of consumer unmanned aerial vehicles (UAVs) across the globe in the past several years. As witnessed over the course of insurgency tactics, it is difficult to restrict terrorists from using widely available technology they perceive as advantageous to their overall strategy. Through a review of the characteristics, consumer market landscape, tactics, and countertactics, as well as operational use of consumer-grade UAVs, this open-source report seeks to provide an introductory understanding of the terrorist-UAV landscape, as well as insights into present and future capabilities. The caveat is evaluating a developing technology haphazardly usedmore » by terrorists in asymmetric conflicts.« less

Thou Shalt Be Reproducible! A Technology Perspective

PubMed Central

Mair, Patrick

2016-01-01

This article elaborates on reproducibility in psychology from a technological viewpoint. Modern open source computational environments are shown and explained that foster reproducibility throughout the whole research life cycle, and to which emerging psychology researchers should be sensitized, are shown and explained. First, data archiving platforms that make datasets publicly available are presented. Second, R is advocated as the data-analytic lingua franca in psychology for achieving reproducible statistical analysis. Third, dynamic report generation environments for writing reproducible manuscripts that integrate text, data analysis, and statistical outputs such as figures and tables in a single document are described. Supplementary materials are provided in order to get the reader started with these technologies. PMID:27471486

First Universities Allied for Essential Medicines (UAEM) Neglected Diseases and Innovation Symposium.

PubMed

Musselwhite, Laura W; Maciag, Karolina; Lankowski, Alex; Gretes, Michael C; Wellems, Thomas E; Tavera, Gloria; Goulding, Rebecca E; Guillen, Ethan

2012-01-01

Universities Allied for Essential Medicines organized its first Neglected Diseases and Innovation Symposium to address expanding roles of public sector research institutions in innovation in research and development of biomedical technologies for treatment of diseases, particularly neglected tropical diseases. Universities and other public research institutions are increasingly integrated into the pharmaceutical innovation system. Academic entities now routinely undertake robust high-throughput screening and medicinal chemistry research programs to identify lead compounds for small molecule drugs and novel drug targets. Furthermore, product development partnerships are emerging between academic institutions, non-profit entities, and biotechnology and pharmaceutical companies to create diagnostics, therapies, and vaccines for diseases of the poor. With not for profit mission statements, open access publishing standards, open source platforms for data sharing and collaboration, and a shift in focus to more translational research, universities and other public research institutions are well-placed to accelerate development of medical technologies, particularly for neglected tropical diseases.

Abstract - Cooperative Research and Development Agreement between Environmental Defense Fund and National Energy Technology Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rose, Kelly K.; Zavala-Zraiza, Daniel

Here, we summarize an effort to develop a global oil and gas infrastructure (GOGI) taxonomy and geodatabase, using a combination of big data computing, custom search and data integration algorithms, and expert driven spatio-temporal analytics to identify, access, and evaluate open oil and gas data resources and uncertainty trends worldwide. This approach leveraged custom National Energy Technology Laboratory (NETL) tools and capabilities in collaboration with Environmental Defense Fund (EDF) and Carbon Limits subject matter expertise, to identify over 380 datasets and integrate more than 4.8 million features into the GOGI database. In addition to acquisition of open oil and gasmore » infrastructure data, information was collected and analyzed to assess the spatial, temporal, and source quality of these resources, and estimate their completeness relative to the top 40 hydrocarbon producing and consuming countries.« less

Big data in food safety: An overview.

PubMed

Marvin, Hans J P; Janssen, Esmée M; Bouzembrak, Yamine; Hendriksen, Peter J M; Staats, Martijn

2017-07-24

Technology is now being developed that is able to handle vast amounts of structured and unstructured data from diverse sources and origins. These technologies are often referred to as big data, and open new areas of research and applications that will have an increasing impact in all sectors of our society. In this paper we assessed to which extent big data is being applied in the food safety domain and identified several promising trends. In several parts of the world, governments stimulate the publication on internet of all data generated in public funded research projects. This policy opens new opportunities for stakeholders dealing with food safety to address issues which were not possible before. Application of mobile phones as detection devices for food safety and the use of social media as early warning of food safety problems are a few examples of the new developments that are possible due to big data.

New Open-Source Version of FLORIS Released | News | NREL

Science.gov Websites

New Open-Source Version of FLORIS Released New Open-Source Version of FLORIS Released January 26 , 2018 National Renewable Energy Laboratory (NREL) researchers recently released an updated open-source simplified and documented. Because of the living, open-source nature of the newly updated utility, NREL

Is Brain Emulation Dangerous?

NASA Astrophysics Data System (ADS)

Eckersley, Peter; Sandberg, Anders

2013-12-01

Brain emulation is a hypothetical but extremely transformative technology which has a non-zero chance of appearing during the next century. This paper investigates whether such a technology would also have any predictable characteristics that give it a chance of being catastrophically dangerous, and whether there are any policy levers which might be used to make it safer. We conclude that the riskiness of brain emulation probably depends on the order of the preceding research trajectory. Broadly speaking, it appears safer for brain emulation to happen sooner, because slower CPUs would make the technology`s impact more gradual. It may also be safer if brains are scanned before they are fully understood from a neuroscience perspective, thereby increasing the initial population of emulations, although this prediction is weaker and more scenario-dependent. The risks posed by brain emulation also seem strongly connected to questions about the balance of power between attackers and defenders in computer security contests. If economic property rights in CPU cycles1 are essentially enforceable, emulation appears to be comparatively safe; if CPU cycles are ultimately easy to steal, the appearance of brain emulation is more likely to be a destabilizing development for human geopolitics. Furthermore, if the computers used to run emulations can be kept secure, then it appears that making brain emulation technologies ―open‖ would make them safer. If, however, computer insecurity is deep and unavoidable, openness may actually be more dangerous. We point to some arguments that suggest the former may be true, tentatively implying that it would be good policy to work towards brain emulation using open scientific methodology and free/open source software codebases

OPEN-SOURCE SOFTWARE IN DENTISTRY: A SYSTEMATIC REVIEW.

PubMed

Chruściel-Nogalska, Małgorzata; Smektała, Tomasz; Tutak, Marcin; Sporniak-Tutak, Katarzyna; Olszewski, Raphael

2017-01-01

Technological development and the need for electronic health records management resulted in the need for a computer with dedicated, commercial software in daily dental practice. The alternative for commercial software may be open-source solutions. Therefore, this study reviewed the current literature on the availability and use of open-source software (OSS) in dentistry. A comprehensive database search was performed on February 1, 2017. Only articles published in peer-reviewed journals with a focus on the use or description of OSS were retrieved. The level of evidence, according to Oxford EBM Centre Levels of Evidence Scale was classified for all studies. Experimental studies underwent additional quality reporting assessment. The screening and evaluation process resulted in twenty-one studies from 1,940 articles found, with 10 of them being experimental studies. None of the articles provided level 1 evidence, and only one study was considered high quality following quality assessment. Twenty-six different OSS programs were described in the included studies of which ten were used for image visualization, five were used for healthcare records management, four were used for educations processes, one was used for remote consultation and simulation, and six were used for general purposes. Our analysis revealed that the dental literature on OSS consists of scarce, incomplete, and methodologically low quality information.

Squid - a simple bioinformatics grid.

PubMed

Carvalho, Paulo C; Glória, Rafael V; de Miranda, Antonio B; Degrave, Wim M

2005-08-03

BLAST is a widely used genetic research tool for analysis of similarity between nucleotide and protein sequences. This paper presents a software application entitled "Squid" that makes use of grid technology. The current version, as an example, is configured for BLAST applications, but adaptation for other computing intensive repetitive tasks can be easily accomplished in the open source version. This enables the allocation of remote resources to perform distributed computing, making large BLAST queries viable without the need of high-end computers. Most distributed computing / grid solutions have complex installation procedures requiring a computer specialist, or have limitations regarding operating systems. Squid is a multi-platform, open-source program designed to "keep things simple" while offering high-end computing power for large scale applications. Squid also has an efficient fault tolerance and crash recovery system against data loss, being able to re-route jobs upon node failure and recover even if the master machine fails. Our results show that a Squid application, working with N nodes and proper network resources, can process BLAST queries almost N times faster than if working with only one computer. Squid offers high-end computing, even for the non-specialist, and is freely available at the project web site. Its open-source and binary Windows distributions contain detailed instructions and a "plug-n-play" instalation containing a pre-configured example.

Open Source 3D Multipurpose Measurement System with Submillimetre Fidelity and First Application in Magnetic Resonance.

PubMed

Han, Haopeng; Moritz, Raphael; Oberacker, Eva; Waiczies, Helmar; Niendorf, Thoralf; Winter, Lukas

2017-10-18

Magnetic resonance imaging (MRI) is the mainstay of diagnostic imaging, a versatile instrument for clinical science and the subject of intense research interest. Advancing clinical science, research and technology of MRI requires high fidelity measurements in quantity, location and time of the given physical property. To meet this goal a broad spectrum of commercial measurement systems has been made available. These instruments frequently share in common that they are costly and typically employ closed proprietary hardware and software. This shortcoming makes any adjustment for a specified application difficult if not prohibitive. Recognizing this limitation this work presents COSI Measure, an automated open source measurement system that provides submillimetre resolution, robust configuration and a large working volume to support a versatile range of applications. The submillimetre fidelity and reproducibility/backlash performance were evaluated experimentally. Magnetic field mapping of a single ring Halbach magnet, a 3.0 T and a 7.0 T MR scanner as well as temperature mapping of a radio frequency coil were successfully conducted. Due to its open source nature and versatile construction, the system can be easily modified for other applications. In a resource limited research setting, COSI Measure makes efficient use of laboratory space, financial resources and collaborative efforts.

Sirepo - Warp

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagler, Robert; Moeller, Paul

Sirepo is an open source framework for cloud computing. The graphical user interface (GUI) for Sirepo, also known as the client, executes in any HTML5 compliant web browser on any computing platform, including tablets. The client is built in JavaScript, making use of the following open source libraries: Bootstrap, which is fundamental for cross-platform web applications; AngularJS, which provides a model–view–controller (MVC) architecture and GUI components; and D3.js, which provides interactive plots and data-driven transformations. The Sirepo server is built on the following Python technologies: Flask, which is a lightweight framework for web development; Jin-ja, which is a secure andmore » widely used templating language; and Werkzeug, a utility library that is compliant with the WSGI standard. We use Nginx as the HTTP server and proxy, which provides a scalable event-driven architecture. The physics codes supported by Sirepo execute inside a Docker container. One of the codes supported by Sirepo is Warp. Warp is a particle-in-cell (PIC) code de-signed to simulate high-intensity charged particle beams and plasmas in both the electrostatic and electromagnetic regimes, with a wide variety of integrated physics models and diagnostics. At pre-sent, Sirepo supports a small subset of Warp’s capabilities. Warp is open source and is part of the Berkeley Lab Accelerator Simulation Toolkit.« less

The Simple Concurrent Online Processing System (SCOPS) - An open-source interface for remotely sensed data processing

NASA Astrophysics Data System (ADS)

Warren, M. A.; Goult, S.; Clewley, D.

2018-06-01

Advances in technology allow remotely sensed data to be acquired with increasingly higher spatial and spectral resolutions. These data may then be used to influence government decision making and solve a number of research and application driven questions. However, such large volumes of data can be difficult to handle on a single personal computer or on older machines with slower components. Often the software required to process data is varied and can be highly technical and too advanced for the novice user to fully understand. This paper describes an open-source tool, the Simple Concurrent Online Processing System (SCOPS), which forms part of an airborne hyperspectral data processing chain that allows users accessing the tool over a web interface to submit jobs and process data remotely. It is demonstrated using Natural Environment Research Council Airborne Research Facility (NERC-ARF) instruments together with other free- and open-source tools to take radiometrically corrected data from sensor geometry into geocorrected form and to generate simple or complex band ratio products. The final processed data products are acquired via an HTTP download. SCOPS can cut data processing times and introduce complex processing software to novice users by distributing jobs across a network using a simple to use web interface.

Open source database of images DEIMOS: extension for large-scale subjective image quality assessment

NASA Astrophysics Data System (ADS)

Vítek, Stanislav

2014-09-01

DEIMOS (Database of Images: Open Source) is an open-source database of images and video sequences for testing, verification and comparison of various image and/or video processing techniques such as compression, reconstruction and enhancement. This paper deals with extension of the database allowing performing large-scale web-based subjective image quality assessment. Extension implements both administrative and client interface. The proposed system is aimed mainly at mobile communication devices, taking into account advantages of HTML5 technology; it means that participants don't need to install any application and assessment could be performed using web browser. The assessment campaign administrator can select images from the large database and then apply rules defined by various test procedure recommendations. The standard test procedures may be fully customized and saved as a template. Alternatively the administrator can define a custom test, using images from the pool and other components, such as evaluating forms and ongoing questionnaires. Image sequence is delivered to the online client, e.g. smartphone or tablet, as a fully automated assessment sequence or viewer can decide on timing of the assessment if required. Environmental data and viewing conditions (e.g. illumination, vibrations, GPS coordinates, etc.), may be collected and subsequently analyzed.

Owgis 2.0: Open Source Java Application that Builds Web GIS Interfaces for Desktop Andmobile Devices

NASA Astrophysics Data System (ADS)

Zavala Romero, O.; Chassignet, E.; Zavala-Hidalgo, J.; Pandav, H.; Velissariou, P.; Meyer-Baese, A.

2016-12-01

OWGIS is an open source Java and JavaScript application that builds easily configurable Web GIS sites for desktop and mobile devices. The current version of OWGIS generates mobile interfaces based on HTML5 technology and can be used to create mobile applications. The style of the generated websites can be modified using COMPASS, a well known CSS Authoring Framework. In addition, OWGIS uses several Open Geospatial Consortium standards to request datafrom the most common map servers, such as GeoServer. It is also able to request data from ncWMS servers, allowing the websites to display 4D data from NetCDF files. This application is configured by XML files that define which layers, geographic datasets, are displayed on the Web GIS sites. Among other features, OWGIS allows for animations; streamlines from vector data; virtual globe display; vertical profiles and vertical transects; different color palettes; the ability to download data; and display text in multiple languages. OWGIS users are mainly scientists in the oceanography, meteorology and climate fields.

A prospective international cooperative information technology platform built using open-source tools for improving the access to and safety of bone marrow transplantation in low- and middle-income countries.

PubMed

Agarwal, Rajat Kumar; Sedai, Amit; Dhimal, Sunil; Ankita, Kumari; Clemente, Luigi; Siddique, Sulman; Yaqub, Naila; Khalid, Sadaf; Itrat, Fatima; Khan, Anwar; Gilani, Sarah Khan; Marwah, Priya; Soni, Rajpreet; Missiry, Mohamed El; Hussain, Mohamed Hamed; Uderzo, Cornelio; Faulkner, Lawrence

2014-01-01

Jagriti Innovations developed a collaboration tool in partnership with the Cure2Children Foundation that has been used by health professionals in Italy, Pakistan, and India for the collaborative management of patients undergoing bone marrow transplantation (BMT) for thalassemia major since August 2008. This online open-access database covers data recording, analyzing, and reporting besides enabling knowledge exchange, telemedicine, capacity building, and quality assurance. As of February 2014, over 2400 patients have been registered and 112 BMTs have been performed with outcomes comparable to international standards, but at a fraction of the cost. This approach avoids medical emigration and contributes to local healthcare strengthening and competitiveness. This paper presents the experience and clinical outcomes associated with the use of this platform built using open-source tools and focusing on a locally pertinent tertiary care procedure-BMT. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

HDDTOOLS: an R package serving Hydrological Data Discovery Tools

NASA Astrophysics Data System (ADS)

Vitolo, C.; Buytaert, W.

2014-12-01

Many governmental bodies and institutions are currently committed to publish open data as the result of a trend of increasing transparency, based on which a wide variety of information produced at public expense is now becoming open and freely available to improve public involvement in the process of decision and policy making. Discovery, access and retrieval of information is, however, not always a simple task. Especially when programmatic access to data resources is not allowed, downloading metadata catalogue, select the information needed, request datasets, de-compression, conversion, manual filtering and parsing can become rather tedious. The R package "hddtools" is an open source project, designed to make all the above operations more efficient by means of re-usable functions. The package facilitate non programmatic access to various online data sources such as the Global Runoff Data Centre, NASA's TRMM mission, the Data60UK database amongst others. This package complements R's growing functionality in environmental web technologies to bridge the gap between data providers and data consumers and it is designed to be the starting building block of scientific workflows for linking data and models in a seamless fashion.

Technology Solutions Case Study: Innovative Retrofit Foundation Insulation Strategies, Minneapolis, Minnesota

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Basements in climates 6 & 7 can account for a fraction of a home's total heat loss when fully conditioned. These foundations are a source of moisture, with convection in open block cavities redistributing water from the wall base, usually when heating. Even when block cavities are capped, the cold foundation concrete can act as a moisture source for wood rim joist components that are in contact with the wall. As below-grade basements are increasingly retrofitted for habitable space, cold foundation walls pose increased challenges for moisture durability, energy use, and occupant comfort. To address this challenge, the NorthernSTAR Buildingmore » America Partnership evaluated a retrofit insulation strategy for foundations that is designed for use with open-core concrete block foundation walls. The three main goals were to improve moisture control, improve occupant comfort, and reduce heat loss.« less

An ontology based information system for the management of institutional repository's collections

NASA Astrophysics Data System (ADS)

Tsolakidis, A.; Kakoulidis, P.; Skourlas, C.

2015-02-01

In this paper we discuss a simple methodological approach to create, and customize institutional repositories for the domain of the technological education. The use of the open source software platform of DSpace is proposed to build up the repository application and provide access to digital resources including research papers, dissertations, administrative documents, educational material, etc. Also the use of owl ontologies is proposed for indexing and accessing the various, heterogeneous items stored in the repository. Customization and operation of a platform for the selection and use of terms or parts of similar existing owl ontologies is also described. This platform could be based on the open source software Protégé that supports owl, is widely used, and also supports visualization, SPARQL etc. The combined use of the owl platform and the DSpace repository form a basis for creating customized ontologies, accommodating the semantic metadata of items and facilitating searching.

ArrayNinja: An Open Source Platform for Unified Planning and Analysis of Microarray Experiments.

PubMed

Dickson, B M; Cornett, E M; Ramjan, Z; Rothbart, S B

2016-01-01

Microarray-based proteomic platforms have emerged as valuable tools for studying various aspects of protein function, particularly in the field of chromatin biochemistry. Microarray technology itself is largely unrestricted in regard to printable material and platform design, and efficient multidimensional optimization of assay parameters requires fluidity in the design and analysis of custom print layouts. This motivates the need for streamlined software infrastructure that facilitates the combined planning and analysis of custom microarray experiments. To this end, we have developed ArrayNinja as a portable, open source, and interactive application that unifies the planning and visualization of microarray experiments and provides maximum flexibility to end users. Array experiments can be planned, stored to a private database, and merged with the imaged results for a level of data interaction and centralization that is not currently attainable with available microarray informatics tools. © 2016 Elsevier Inc. All rights reserved.

An open-source platform to study uniaxial stress effects on nanoscale devices

NASA Astrophysics Data System (ADS)

Signorello, G.; Schraff, M.; Zellekens, P.; Drechsler, U.; Bürge, M.; Steinauer, H. R.; Heller, R.; Tschudy, M.; Riel, H.

2017-05-01

We present an automatic measurement platform that enables the characterization of nanodevices by electrical transport and optical spectroscopy as a function of the uniaxial stress. We provide insights into and detailed descriptions of the mechanical device, the substrate design and fabrication, and the instrument control software, which is provided under open-source license. The capability of the platform is demonstrated by characterizing the piezo-resistance of an InAs nanowire device using a combination of electrical transport and Raman spectroscopy. The advantages of this measurement platform are highlighted by comparison with state-of-the-art piezo-resistance measurements in InAs nanowires. We envision that the systematic application of this methodology will provide new insights into the physics of nanoscale devices and novel materials for electronics, and thus contribute to the assessment of the potential of strain as a technology booster for nanoscale electronics.

Client-side Skype forensics: an overview

NASA Astrophysics Data System (ADS)

Meißner, Tina; Kröger, Knut; Creutzburg, Reiner

2013-03-01

IT security and computer forensics are important components in the information technology. In the present study, a client-side Skype forensics is performed. It is designed to explain which kind of user data are stored on a computer and which tools allow the extraction of those data for a forensic investigation. There are described both methods - a manual analysis and an analysis with (mainly) open source tools, respectively.

Metal-optic and Plasmonic Semiconductor-based Nanolasers

DTIC Science & Technology

2012-05-07

provides a means to integrate laser sources for silicon photonics technology. Using wafer bonding techniques, the metal- clad nanocavity can be integrated...SUPPLEMENTARY NOTES 14. ABSTRACT Over the past few decades, semiconductor lasers have relentlessly followed the path towards miniaturization...Smaller lasers are more energy e cient, are cheaper to make, and open up new applications in sensing and displays, among many other things. Yet, up until

OTF CCSDS Mission Operations Prototype. Directory and Action Service. Phase I: Exit Presentation

NASA Technical Reports Server (NTRS)

Reynolds, Walter F.; Lucord, Steven A.; Stevens, John E.

2009-01-01

This slide presentation describes the phase I directory and action service prototype for the CCSDS system. The project goals are to: (1) Demonstrate the use of Mission Operations standards to implement Directory and Action Services (2) Investigate Mission Operations language neutrality (3) Investigate C3I XML interoperability concepts (4) Integrate applicable open source technologies in a Service Oriented Architecture

Informatics Infrastructure for the Materials Genome Initiative

NASA Astrophysics Data System (ADS)

Dima, Alden; Bhaskarla, Sunil; Becker, Chandler; Brady, Mary; Campbell, Carelyn; Dessauw, Philippe; Hanisch, Robert; Kattner, Ursula; Kroenlein, Kenneth; Newrock, Marcus; Peskin, Adele; Plante, Raymond; Li, Sheng-Yen; Rigodiat, Pierre-François; Amaral, Guillaume Sousa; Trautt, Zachary; Schmitt, Xavier; Warren, James; Youssef, Sharief

2016-08-01

A materials data infrastructure that enables the sharing and transformation of a wide range of materials data is an essential part of achieving the goals of the Materials Genome Initiative. We describe two high-level requirements of such an infrastructure as well as an emerging open-source implementation consisting of the Materials Data Curation System and the National Institute of Standards and Technology Materials Resource Registry.

Tools to Analyze Morphology and Spatially Mapped Molecular Data | Informatics Technology for Cancer Research (ITCR)

Cancer.gov

This project is to develop, deploy, and disseminate a suite of open source tools and integrated informatics platform that will facilitate multi-scale, correlative analyses of high resolution whole slide tissue image data, spatially mapped genetics and molecular data for cancer research. This platform will play an essential role in supporting studies of tumor initiation, development, heterogeneity, invasion, and metastasis.

Impact of Top Management Team on Firm Performance in Small and Medium-Sized Enterprises Adopting Commercial Open-Source Enterprise Resource Planning

ERIC Educational Resources Information Center

Cereola, Sandra J.; Wier, Benson; Norman, Carolyn Strand

2012-01-01

Based on the large number of small and medium-sized enterprises (SMEs) in the United States, their increasing interest in enterprise-wide software systems and their impact on the US economy, it is important to understand the determinants that can facilitate the successful implementation and assimilation of such technology into these firms' daily…

Open Source Web-Based Solutions for Disseminating and Analyzing Flood Hazard Information at the Community Level

NASA Astrophysics Data System (ADS)

Santillan, M. M.-M.; Santillan, J. R.; Morales, E. M. O.

2017-09-01

We discuss in this paper the development, including the features and functionalities, of an open source web-based flood hazard information dissemination and analytical system called "Flood EViDEns". Flood EViDEns is short for "Flood Event Visualization and Damage Estimations", an application that was developed by the Caraga State University to address the needs of local disaster managers in the Caraga Region in Mindanao, Philippines in accessing timely and relevant flood hazard information before, during and after the occurrence of flood disasters at the community (i.e., barangay and household) level. The web application made use of various free/open source web mapping and visualization technologies (GeoServer, GeoDjango, OpenLayers, Bootstrap), various geospatial datasets including LiDAR-derived elevation and information products, hydro-meteorological data, and flood simulation models to visualize various scenarios of flooding and its associated damages to infrastructures. The Flood EViDEns application facilitates the release and utilization of this flood-related information through a user-friendly front end interface consisting of web map and tables. A public version of the application can be accessed at http://121.97.192.11:8082/. The application is currently expanded to cover additional sites in Mindanao, Philippines through the "Geo-informatics for the Systematic Assessment of Flood Effects and Risks for a Resilient Mindanao" or the "Geo-SAFER Mindanao" Program.

OpenEIS. Developer Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lutes, Robert G.; Neubauer, Casey C.; Haack, Jereme N.

2015-03-31

The Department of Energy’s (DOE’s) Building Technologies Office (BTO) is supporting the development of an open-source software tool for analyzing building energy and operational data: OpenEIS (open energy information system). This tool addresses the problems of both owners of building data and developers of tools to analyze this data. Building owners and managers have data but lack the tools to analyze it while tool developers lack data in a common format to ease development of reusable data analysis tools. This document is intended for developers of applications and explains the mechanisms for building analysis applications, accessing data, and displaying datamore » using a visualization from the included library. A brief introduction to the visualizations can be used as a jumping off point for developers familiar with JavaScript to produce their own. Several example applications are included which can be used along with this document to implement algorithms for performing energy data analysis.« less

The Matsu Wheel: A Cloud-Based Framework for Efficient Analysis and Reanalysis of Earth Satellite Imagery

NASA Technical Reports Server (NTRS)

Patterson, Maria T.; Anderson, Nicholas; Bennett, Collin; Bruggemann, Jacob; Grossman, Robert L.; Handy, Matthew; Ly, Vuong; Mandl, Daniel J.; Pederson, Shane; Pivarski, James;

DOE Office of Scientific and Technical Information (OSTI.GOV)

Exercise environment for Introduction to Cyber Technologies class. This software is essentially a collection of short scripts, configuration files, and small executables that form the exercise component of the Sandia Cyber Technologies Academy's Introduction to Cyber Technologies class. It builds upon other open-source technologies, such as Debian Linux and minimega, to provide comprehensive Linux and networking exercises that make learning these topics exciting and fun. Sample exercises: a pre-built set of home directories the student must navigate through to learn about privilege escalation, the creation of a virtual network playground designed to teach the student about the resiliency of themore » Internet, and a two-hour Capture the Flag challenge for the final lesson. There are approximately thirty (30) exercises included for the students to complete as part of the course.« less

"Big data" and "open data": What kind of access should researchers enjoy?

PubMed

Chatellier, Gilles; Varlet, Vincent; Blachier-Poisson, Corinne

2016-02-01

The healthcare sector is currently facing a new paradigm, the explosion of "big data". Coupled with advances in computer technology, the field of "big data" appears promising, allowing us to better understand the natural history of diseases, to follow-up new technologies (devices, drugs) implementation and to participate in precision medicine, etc. Data sources are multiple (medical and administrative data, electronic medical records, data from rapidly developing technologies such as DNA sequencing, connected devices, etc.) and heterogeneous while their use requires complex methods for accurate analysis. Moreover, faced with this new paradigm, we must determine who could (or should) have access to which data, how to combine collective interest and protection of personal data and how to finance in the long-term both operating costs and databases interrogation. This article analyses the opportunities and challenges related to the use of open and/or "big data", from the viewpoint of pharmacologists and representatives of the pharmaceutical and medical device industry. Copyright © 2016 Société française de pharmacologie et de thérapeutique. Published by Elsevier Masson SAS. All rights reserved.

Automation Hooks Architecture Trade Study for Flexible Test Orchestration

NASA Technical Reports Server (NTRS)

Lansdowne, Chatwin A.; Maclean, John R.; Graffagnino, Frank J.; McCartney, Patrick A.

2010-01-01

We describe the conclusions of a technology and communities survey supported by concurrent and follow-on proof-of-concept prototyping to evaluate feasibility of defining a durable, versatile, reliable, visible software interface to support strategic modularization of test software development. The objective is that test sets and support software with diverse origins, ages, and abilities can be reliably integrated into test configurations that assemble and tear down and reassemble with scalable complexity in order to conduct both parametric tests and monitored trial runs. The resulting approach is based on integration of three recognized technologies that are currently gaining acceptance within the test industry and when combined provide a simple, open and scalable test orchestration architecture that addresses the objectives of the Automation Hooks task. The technologies are automated discovery using multicast DNS Zero Configuration Networking (zeroconf), commanding and data retrieval using resource-oriented Restful Web Services, and XML data transfer formats based on Automatic Test Markup Language (ATML). This open-source standards-based approach provides direct integration with existing commercial off-the-shelf (COTS) analysis software tools.

Ethoscopes: An open platform for high-throughput ethomics.

PubMed

Geissmann, Quentin; Garcia Rodriguez, Luis; Beckwith, Esteban J; French, Alice S; Jamasb, Arian R; Gilestro, Giorgio F

2017-10-01

Here, we present the use of ethoscopes, which are machines for high-throughput analysis of behavior in Drosophila and other animals. Ethoscopes provide a software and hardware solution that is reproducible and easily scalable. They perform, in real-time, tracking and profiling of behavior by using a supervised machine learning algorithm, are able to deliver behaviorally triggered stimuli to flies in a feedback-loop mode, and are highly customizable and open source. Ethoscopes can be built easily by using 3D printing technology and rely on Raspberry Pi microcomputers and Arduino boards to provide affordable and flexible hardware. All software and construction specifications are available at http://lab.gilest.ro/ethoscope.

MetaLIMS, a simple open-source laboratory information management system for small metagenomic labs

PubMed Central

Gaultier, Nicolas Paul Eugène; Miller, Dana; Purbojati, Rikky Wenang; Lauro, Federico M.

2017-01-01

Abstract Background: As the cost of sequencing continues to fall, smaller groups increasingly initiate and manage larger sequencing projects and take on the complexity of data storage for high volumes of samples. This has created a need for low-cost laboratory information management systems (LIMS) that contain flexible fields to accommodate the unique nature of individual labs. Many labs do not have a dedicated information technology position, so LIMS must also be easy to setup and maintain with minimal technical proficiency. Findings: MetaLIMS is a free and open-source web-based application available via GitHub. The focus of MetaLIMS is to store sample metadata prior to sequencing and analysis pipelines. Initially designed for environmental metagenomics labs, in addition to storing generic sample collection information and DNA/RNA processing information, the user can also add fields specific to the user's lab. MetaLIMS can also produce a basic sequencing submission form compatible with the proprietary Clarity LIMS system used by some sequencing facilities. To help ease the technical burden associated with web deployment, MetaLIMS options the use of commercial web hosting combined with MetaLIMS bash scripts for ease of setup. Conclusions: MetaLIMS overcomes key challenges common in LIMS by giving labs access to a low-cost and open-source tool that also has the flexibility to meet individual lab needs and an option for easy deployment. By making the web application open source and hosting it on GitHub, we hope to encourage the community to build upon MetaLIMS, making it more robust and tailored to the needs of more researchers. PMID:28430964

An open source, 3D printed preclinical MRI phantom for repeated measures of contrast agents and reference standards.

PubMed

Cox, B L; Ludwig, K D; Adamson, E B; Eliceiri, K W; Fain, S B

2018-03-01

In medical imaging, clinicians, researchers and technicians have begun to use 3D printing to create specialized phantoms to replace commercial ones due to their customizable and iterative nature. Presented here is the design of a 3D printed open source, reusable magnetic resonance imaging (MRI) phantom, capable of flood-filling, with removable samples for measurements of contrast agent solutions and reference standards, and for use in evaluating acquisition techniques and image reconstruction performance. The phantom was designed using SolidWorks, a computer-aided design software package. The phantom consists of custom and off-the-shelf parts and incorporates an air hole and Luer Lock system to aid in flood filling, a marker for orientation of samples in the filled mode and bolt and tube holes for assembly. The cost of construction for all materials is under $90. All design files are open-source and available for download. To demonstrate utility, B 0 field mapping was performed using a series of gadolinium concentrations in both the unfilled and flood-filled mode. An excellent linear agreement (R 2 >0.998) was observed between measured relaxation rates (R 1 /R 2 ) and gadolinium concentration. The phantom provides a reliable setup to test data acquisition and reconstruction methods and verify physical alignment in alternative nuclei MRI techniques (e.g. carbon-13 and fluorine-19 MRI). A cost-effective, open-source MRI phantom design for repeated quantitative measurement of contrast agents and reference standards in preclinical research is presented. Specifically, the work is an example of how the emerging technology of 3D printing improves flexibility and access for custom phantom design.

MetaLIMS, a simple open-source laboratory information management system for small metagenomic labs.

PubMed

Heinle, Cassie Elizabeth; Gaultier, Nicolas Paul Eugène; Miller, Dana; Purbojati, Rikky Wenang; Lauro, Federico M

2017-06-01

As the cost of sequencing continues to fall, smaller groups increasingly initiate and manage larger sequencing projects and take on the complexity of data storage for high volumes of samples. This has created a need for low-cost laboratory information management systems (LIMS) that contain flexible fields to accommodate the unique nature of individual labs. Many labs do not have a dedicated information technology position, so LIMS must also be easy to setup and maintain with minimal technical proficiency. MetaLIMS is a free and open-source web-based application available via GitHub. The focus of MetaLIMS is to store sample metadata prior to sequencing and analysis pipelines. Initially designed for environmental metagenomics labs, in addition to storing generic sample collection information and DNA/RNA processing information, the user can also add fields specific to the user's lab. MetaLIMS can also produce a basic sequencing submission form compatible with the proprietary Clarity LIMS system used by some sequencing facilities. To help ease the technical burden associated with web deployment, MetaLIMS options the use of commercial web hosting combined with MetaLIMS bash scripts for ease of setup. MetaLIMS overcomes key challenges common in LIMS by giving labs access to a low-cost and open-source tool that also has the flexibility to meet individual lab needs and an option for easy deployment. By making the web application open source and hosting it on GitHub, we hope to encourage the community to build upon MetaLIMS, making it more robust and tailored to the needs of more researchers. © The Authors 2017. Published by Oxford University Press.

Energy and Raw Materials in the Selection of Technologies for Iron and Steel

NASA Astrophysics Data System (ADS)

Fortini, Otavio Macedo

2016-09-01

This paper discusses the selection of metal extraction technologies according to the regional availability of energy resources. The most important energy sources in iron and steel production are determined from a review of current technologies to inform possible future scenarios of capacity replacement or expansion according to geography. Alternative technologies are not discussed, considering that actual investment in capacity is most often dominated by high degrees of risk aversion. As such, only technologies proven at a reasonable scale are included in the selection matrix. Scenarios of capacity choice are defined in terms of actions from external agents, those which are not directly involved in the industry but have the capacity to regulate actions by metal producing players. Two extreme scenarios corresponding to closed and open economies are used to set bounds for future expectations. Among steelmaking processes under fully open trade conditions, it is found that EAF steelmaking with charge pre-heat should be the technology of choice in all regions of the world except for South America and Europe, where Integrated Steel Mills have a cost advantage. In fully closed exchange scenarios, Integrated Steel Mills would be the prevalent technology in South America, Sub-Saharan Africa, India, and the former USSR, EAF with scrap pre-heating prevailing in all other regions. On the other hand, HYL-ZR would be the iron making technology of choice in all regions under full exchange scenarios. Under fully closed exchange conditions, Mini-Blast Furnaces, COREX, and HYL-ZR would find regional applications. Increases in raw materials and energy costs of 38 pct in steelmaking and 63 pct in ironmaking are found in going from fully open to fully closed exchange regimes. It is also found that Southeast Asia is the most suitable region for deploying new steelmaking capacity, while Australia and Russia are the best selection for new iron making capacity.

Pharmer: efficient and exact pharmacophore search.

PubMed

Koes, David Ryan; Camacho, Carlos J

2011-06-27

Pharmacophore search is a key component of many drug discovery efforts. Pharmer is a new computational approach to pharmacophore search that scales with the breadth and complexity of the query, not the size of the compound library being screened. Two novel methods for organizing pharmacophore data, the Pharmer KDB-tree and Bloom fingerprints, enable Pharmer to perform an exact pharmacophore search of almost two million structures in less than a minute. In general, Pharmer is more than an order of magnitude faster than existing technologies. The complete source code is available under an open-source license at http://pharmer.sourceforge.net .

3Dmol.js: molecular visualization with WebGL.

PubMed

Rego, Nicholas; Koes, David

2015-04-15

3Dmol.js is a modern, object-oriented JavaScript library that uses the latest web technologies to provide interactive, hardware-accelerated three-dimensional representations of molecular data without the need to install browser plugins or Java. 3Dmol.js provides a full featured API for developers as well as a straightforward declarative interface that lets users easily share and embed molecular data in websites. 3Dmol.js is distributed under the permissive BSD open source license. Source code and documentation can be found at http://3Dmol.csb.pitt.edu dkoes@pitt.edu. © The Author 2014. Published by Oxford University Press.

High-power free-electron lasers-technology and future applications

NASA Astrophysics Data System (ADS)

Socol, Yehoshua

2013-03-01

Free-electron laser (FEL) is an all-electric, high-power, high beam-quality source of coherent radiation, tunable - unlike other laser sources - at any wavelength within wide spectral region from hard X-rays to far-IR and beyond. After the initial push in the framework of the “Star Wars” program, the FEL technology benefited from decades of R&D and scientific applications. Currently, there are clear signs that the FEL technology reached maturity, enabling real-world applications. E.g., successful and unexpectedly smooth commissioning of the world-first X-ray FEL in 2010 increased in one blow by more than an order of magnitude (40×) wavelength region available by FEL technology and thus demonstrated that the theoretical predictions just keep true in real machines. Experience of ordering turn-key electron beamlines from commercial companies is a further demonstration of the FEL technology maturity. Moreover, successful commissioning of the world-first multi-turn energy-recovery linac demonstrated feasibility of reducing FEL size, cost and power consumption by probably an order of magnitude in respect to previous configurations, opening way to applications, previously considered as non-feasible. This review takes engineer-oriented approach to discuss the FEL technology issues, keeping in mind applications in the fields of military and aerospace, next generation semiconductor lithography, photo-chemistry and isotope separation.

Open for Business

ERIC Educational Resources Information Center

Voyles, Bennett

2007-01-01

People know about the Sakai Project (open source course management system); they may even know about Kuali (open source financials). So, what is the next wave in open source software? This article discusses business intelligence (BI) systems. Though open source BI may still be only a rumor in most campus IT departments, some brave early adopters…

Sharing Human-Generated Observations by Integrating HMI and the Semantic Sensor Web

PubMed Central

Sigüenza, Álvaro; Díaz-Pardo, David; Bernat, Jesús; Vancea, Vasile; Blanco, José Luis; Conejero, David; Gómez, Luis Hernández

2012-01-01

Current “Internet of Things” concepts point to a future where connected objects gather meaningful information about their environment and share it with other objects and people. In particular, objects embedding Human Machine Interaction (HMI), such as mobile devices and, increasingly, connected vehicles, home appliances, urban interactive infrastructures, etc., may not only be conceived as sources of sensor information, but, through interaction with their users, they can also produce highly valuable context-aware human-generated observations. We believe that the great promise offered by combining and sharing all of the different sources of information available can be realized through the integration of HMI and Semantic Sensor Web technologies. This paper presents a technological framework that harmonizes two of the most influential HMI and Sensor Web initiatives: the W3C's Multimodal Architecture and Interfaces (MMI) and the Open Geospatial Consortium (OGC) Sensor Web Enablement (SWE) with its semantic extension, respectively. Although the proposed framework is general enough to be applied in a variety of connected objects integrating HMI, a particular development is presented for a connected car scenario where drivers' observations about the traffic or their environment are shared across the Semantic Sensor Web. For implementation and evaluation purposes an on-board OSGi (Open Services Gateway Initiative) architecture was built, integrating several available HMI, Sensor Web and Semantic Web technologies. A technical performance test and a conceptual validation of the scenario with potential users are reported, with results suggesting the approach is sound. PMID:22778643

Sharing human-generated observations by integrating HMI and the Semantic Sensor Web.

PubMed

Sigüenza, Alvaro; Díaz-Pardo, David; Bernat, Jesús; Vancea, Vasile; Blanco, José Luis; Conejero, David; Gómez, Luis Hernández

2012-01-01

Current "Internet of Things" concepts point to a future where connected objects gather meaningful information about their environment and share it with other objects and people. In particular, objects embedding Human Machine Interaction (HMI), such as mobile devices and, increasingly, connected vehicles, home appliances, urban interactive infrastructures, etc., may not only be conceived as sources of sensor information, but, through interaction with their users, they can also produce highly valuable context-aware human-generated observations. We believe that the great promise offered by combining and sharing all of the different sources of information available can be realized through the integration of HMI and Semantic Sensor Web technologies. This paper presents a technological framework that harmonizes two of the most influential HMI and Sensor Web initiatives: the W3C's Multimodal Architecture and Interfaces (MMI) and the Open Geospatial Consortium (OGC) Sensor Web Enablement (SWE) with its semantic extension, respectively. Although the proposed framework is general enough to be applied in a variety of connected objects integrating HMI, a particular development is presented for a connected car scenario where drivers' observations about the traffic or their environment are shared across the Semantic Sensor Web. For implementation and evaluation purposes an on-board OSGi (Open Services Gateway Initiative) architecture was built, integrating several available HMI, Sensor Web and Semantic Web technologies. A technical performance test and a conceptual validation of the scenario with potential users are reported, with results suggesting the approach is sound.

The Commercial Open Source Business Model

NASA Astrophysics Data System (ADS)

Riehle, Dirk

Commercial open source software projects are open source software projects that are owned by a single firm that derives a direct and significant revenue stream from the software. Commercial open source at first glance represents an economic paradox: How can a firm earn money if it is making its product available for free as open source? This paper presents the core properties of com mercial open source business models and discusses how they work. Using a commercial open source approach, firms can get to market faster with a superior product at lower cost than possible for traditional competitors. The paper shows how these benefits accrue from an engaged and self-supporting user community. Lacking any prior comprehensive reference, this paper is based on an analysis of public statements by practitioners of commercial open source. It forges the various anecdotes into a coherent description of revenue generation strategies and relevant business functions.

Remote Monitoring of Soil Water Content, Temperature, and Heat Flow Using Low-Cost Cellular (3G) IoT Technology

NASA Astrophysics Data System (ADS)

Ham, J. M.

2016-12-01

New microprocessor boards, open-source sensors, and cloud infrastructure developed for the Internet of Things (IoT) can be used to create low-cost monitoring systems for environmental research. This project describes two applications in soil science and hydrology: 1) remote monitoring of the soil temperature regime near oil and gas operations to detect the thermal signature associated with the natural source zone degradation of hydrocarbon contaminants in the vadose zone, and 2) remote monitoring of soil water content near the surface as part of a global citizen science network. In both cases, prototype data collection systems were built around the cellular (2G/3G) "Electron" microcontroller (www.particle.io). This device allows connectivity to the cloud using a low-cost global SIM and data plan. The systems have cellular connectivity in over 100 countries and data can be logged to the cloud for storage. Users can view data real time over any internet connection or via their smart phone. For both projects, data logging, storage, and visualization was done using IoT services like Thingspeak (thingspeak.com). The soil thermal monitoring system was tested on experimental plots in Colorado USA to evaluate the accuracy and reliability of different temperature sensors and 3D printed housings. The soil water experiment included comparison opens-source capacitance-based sensors to commercial versions. Results demonstrate the power of leveraging IoT technology for field research.

Towards open collaborative health informatics - The Role of free/libre open source principles. Contribution of the IMIA Open Source Health Informatics Working Group.

PubMed

Karopka, T; Schmuhl, H; Marcelo, A; Molin, J Dal; Wright, G

2011-01-01

: To analyze the contribution of Free/Libre Open Source Software in health care (FLOSS-HC) and to give perspectives for future developments. The paper summarizes FLOSS-related trends in health care as anticipated by members of the IMIA Open Source Working Group. Data were obtained through literature review and personal experience and observations of the authors in the last two decades. A status quo is given by a frequency analysis of the database of Medfloss.org, one of the world's largest platforms dedicated to FLOSS-HC. The authors discuss current problems in the field of health care and finally give a prospective roadmap, a projection of the potential influences of FLOSS in health care. FLOSS-HC already exists for more than 2 decades. Several projects have shown that FLOSS may produce highly competitive alternatives to proprietary solutions that are at least equivalent in usability and have a better total cost of ownership ratio. The Medfloss.org database currently lists 221 projects of diverse application types. FLOSS principles hold a great potential for addressing several of the most critical problems in health care IT. The authors argue that an ecosystem perspective is relevant and that FLOSS principles are best suited to create health IT systems that are able to evolve over time as medical knowledge, technologies, insights, workflows etc. continuously change. All these factors that inherently influence the development of health IT systems are changing at an ever growing pace. Traditional models of software engineering are not able to follow these changes and provide up-to-date systems for an acceptable cost/value ratio. To allow FLOSS to positively influence Health IT in the future a "FLOSS-friendly" environment has to be provided. Policy makers should resolve uncertainties in the legal framework that disfavor FLOSS. Certification procedures should be specified in a way that they do not raise additional barriers for FLOSS.

Web Mapping Architectures Based on Open Specifications and Free and Open Source Software in the Water Domain

NASA Astrophysics Data System (ADS)

Arias Muñoz, C.; Brovelli, M. A.; Kilsedar, C. E.; Moreno-Sanchez, R.; Oxoli, D.

2017-09-01

The availability of water-related data and information across different geographical and jurisdictional scales is of critical importance for the conservation and management of water resources in the 21st century. Today information assets are often found fragmented across multiple agencies that use incompatible data formats and procedures for data collection, storage, maintenance, analysis, and distribution. The growing adoption of Web mapping systems in the water domain is reducing the gap between data availability and its practical use and accessibility. Nevertheless, more attention must be given to the design and development of these systems to achieve high levels of interoperability and usability while fulfilling different end user informational needs. This paper first presents a brief overview of technologies used in the water domain, and then presents three examples of Web mapping architectures based on free and open source software (FOSS) and the use of open specifications (OS) that address different users' needs for data sharing, visualization, manipulation, scenario simulations, and map production. The purpose of the paper is to illustrate how the latest developments in OS for geospatial and water-related data collection, storage, and sharing, combined with the use of mature FOSS projects facilitate the creation of sophisticated interoperable Web-based information systems in the water domain.

Technical use of compact micro-onde devicesa)

NASA Astrophysics Data System (ADS)

Sortais, P.; Lamy, T.; Médard, J.; Angot, J.; Sudraud, P.; Salord, O.; Homri, S.

2012-02-01

Due to the very small size of a COMIC (Compact MIcrowave and Coaxial) device [P. Sortais, T. Lamy, J. Médard, J. Angot, L. Latrasse, and T. Thuillier, Rev. Sci. Instrum. 81, 02B31 (2010), 10.1063/1.3272878] it is possible to install such plasma or ion source inside very different technical environments. New applications of such a device are presented, mainly for industrial applications. We have now designed ion sources for highly focused ion beam devices, ion beam machining ion guns, or thin film deposition machines. We will mainly present new capabilities opened by the use of a multi-beam system for thin film deposition based on sputtering by medium energy ion beams. With the new concept of multi-beam sputtering (MBS), it is possible to open new possibilities concerning the ion beam sputtering (IBS) technology, especially for large size deposition of high uniformity thin films. By the use of multi-spots of evaporation, each one corresponding to an independent tuning of an individual COMIC ion source, it will be very easy to co-evaporate different components.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akyol, Bora A.; Allwardt, Craig H.; Beech, Zachary W.

VOLTTRON is a flexible, reliable, and scalable platform for distributed control and sensing. VOLTTRON serves in four primary roles: •A reference platform for researchers to quickly develop control applications for transactive energy. •A reference platform with flexible data store support for energy analytics applications either in academia or in commercial enterprise. •A platform from which commercial enterprise can develop products without license issues and easily integrate into their product line. •An accelerator to drive industry adoption of transactive energy and advanced building energy analytics. Pacific Northwest National Laboratory, with funding from the U.S. Department of Energy’s Building Technologies Office, developedmore » and maintains VOLTTRON as an open-source community project. VOLTTRON source code includes agent execution software; agents that perform critical services that enable and enhance VOLTTRON functionality; and numerous agents that utilize the platform to perform a specific function (fault detection, demand response, etc.). The platform supports energy, operational, and financial transactions between networked entities (equipment, organizations, buildings, grid, etc.) and enhance the control infrastructure of existing buildings through the use of open-source device communication, control protocols, and integrated analytics.« less

Combustion of Biofuel as a Renewable Energy Source in Sandia Flame Geometry

NASA Astrophysics Data System (ADS)

Rassoulinejad-Mousavi, Seyed Moein; Mao, Yijin; Zhang, Yuwen

Energy security and climate change are two important key causes of wide spread employment of biofuel notwithstanding of problems associated with its usage. In this research, combustion of biofuel as a renewable energy source was numerically investigated in the well-known and practical Sandia flame geometry. Combustion performance of the flame has been simulated by burning biodiesel (methyl decanoate, methyl 9-decenoate, and n-heptane) oxidation with 118 species reduced/skeletal mechanism. The open-source code OpenFoam was used for simulating turbulent biodiesel-air combustion in the cylindrical chamber using the standard k-epsilon model. To check the accuracy of numerical results, the system was initially validated with methane-air Sandia national laboratories flame D experimental results. Excellent agreements between numerical and experimental results were observed at different cross sections. After ignition, temperature distributions at different distances of axial and radial directions as well as species mass fraction were investigated. It is concluded that biofuel has the capability of implementation in the turbulent jet flame that is a step forward in promotion of sustainable energy technologies and applications.

Open Drug Discovery Teams: A Chemistry Mobile App for Collaboration.

PubMed

Ekins, Sean; Clark, Alex M; Williams, Antony J

2012-08-01

The Open Drug Discovery Teams (ODDT) project provides a mobile app primarily intended as a research topic aggregator of predominantly open science data collected from various sources on the internet. It exists to facilitate interdisciplinary teamwork and to relieve the user from data overload, delivering access to information that is highly relevant and focused on their topic areas of interest. Research topics include areas of chemistry and adjacent molecule-oriented biomedical sciences, with an emphasis on those which are most amenable to open research at present. These include rare and neglected diseases, and precompetitive and public-good initiatives such as green chemistry. The ODDT project uses a free mobile app as user entry point. The app has a magazine-like interface, and server-side infrastructure for hosting chemistry-related data as well as value added services. The project is open to participation from anyone and provides the ability for users to make annotations and assertions, thereby contributing to the collective value of the data to the engaged community. Much of the content is derived from public sources, but the platform is also amenable to commercial data input. The technology could also be readily used in-house by organizations as a research aggregator that could integrate internal and external science and discussion. The infrastructure for the app is currently based upon the Twitter API as a useful proof of concept for a real time source of publicly generated content. This could be extended further by accessing other APIs providing news and data feeds of relevance to a particular area of interest. As the project evolves, social networking features will be developed for organizing participants into teams, with various forms of communication and content management possible.

Open Drug Discovery Teams: A Chemistry Mobile App for Collaboration

PubMed Central

Ekins, Sean; Clark, Alex M; Williams, Antony J

2012-01-01

Abstract The Open Drug Discovery Teams (ODDT) project provides a mobile app primarily intended as a research topic aggregator of predominantly open science data collected from various sources on the internet. It exists to facilitate interdisciplinary teamwork and to relieve the user from data overload, delivering access to information that is highly relevant and focused on their topic areas of interest. Research topics include areas of chemistry and adjacent molecule-oriented biomedical sciences, with an emphasis on those which are most amenable to open research at present. These include rare and neglected diseases, and precompetitive and public-good initiatives such as green chemistry. The ODDT project uses a free mobile app as user entry point. The app has a magazine-like interface, and server-side infrastructure for hosting chemistry-related data as well as value added services. The project is open to participation from anyone and provides the ability for users to make annotations and assertions, thereby contributing to the collective value of the data to the engaged community. Much of the content is derived from public sources, but the platform is also amenable to commercial data input. The technology could also be readily used in-house by organizations as a research aggregator that could integrate internal and external science and discussion. The infrastructure for the app is currently based upon the Twitter API as a useful proof of concept for a real time source of publicly generated content. This could be extended further by accessing other APIs providing news and data feeds of relevance to a particular area of interest. As the project evolves, social networking features will be developed for organizing participants into teams, with various forms of communication and content management possible. PMID:23198003

Generation of open biomedical datasets through ontology-driven transformation and integration processes.

PubMed

Carmen Legaz-García, María Del; Miñarro-Giménez, José Antonio; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás

2016-06-03

Biomedical research usually requires combining large volumes of data from multiple heterogeneous sources, which makes difficult the integrated exploitation of such data. The Semantic Web paradigm offers a natural technological space for data integration and exploitation by generating content readable by machines. Linked Open Data is a Semantic Web initiative that promotes the publication and sharing of data in machine readable semantic formats. We present an approach for the transformation and integration of heterogeneous biomedical data with the objective of generating open biomedical datasets in Semantic Web formats. The transformation of the data is based on the mappings between the entities of the data schema and the ontological infrastructure that provides the meaning to the content. Our approach permits different types of mappings and includes the possibility of defining complex transformation patterns. Once the mappings are defined, they can be automatically applied to datasets to generate logically consistent content and the mappings can be reused in further transformation processes. The results of our research are (1) a common transformation and integration process for heterogeneous biomedical data; (2) the application of Linked Open Data principles to generate interoperable, open, biomedical datasets; (3) a software tool, called SWIT, that implements the approach. In this paper we also describe how we have applied SWIT in different biomedical scenarios and some lessons learned. We have presented an approach that is able to generate open biomedical repositories in Semantic Web formats. SWIT is able to apply the Linked Open Data principles in the generation of the datasets, so allowing for linking their content to external repositories and creating linked open datasets. SWIT datasets may contain data from multiple sources and schemas, thus becoming integrated datasets.

Open-source software: not quite endsville.

PubMed

Stahl, Matthew T

2005-02-01

Open-source software will never achieve ubiquity. There are environments in which it simply does not flourish. By its nature, open-source development requires free exchange of ideas, community involvement, and the efforts of talented and dedicated individuals. However, pressures can come from several sources that prevent this from happening. In addition, openness and complex licensing issues invite misuse and abuse. Care must be taken to avoid the pitfalls of open-source software.

Developing an Open Source Option for NASA Software

NASA Technical Reports Server (NTRS)

Moran, Patrick J.; Parks, John W. (Technical Monitor)

2003-01-01

We present arguments in favor of developing an Open Source option for NASA software; in particular we discuss how Open Source is compatible with NASA's mission. We compare and contrast several of the leading Open Source licenses, and propose one - the Mozilla license - for use by NASA. We also address some of the related issues for NASA with respect to Open Source. In particular, we discuss some of the elements in the External Release of NASA Software document (NPG 2210.1A) that will likely have to be changed in order to make Open Source a reality withm the agency.

ADMS State of the Industry and Gap Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agalgaonkar, Yashodhan P.; Marinovici, Maria C.; Vadari, Subramanian V.

2016-03-31

An Advanced distribution management system (ADMS) is a platform for optimized distribution system operational management. This platform comprises of distribution management system (DMS) applications, supervisory control and data acquisition (SCADA), outage management system (OMS), and distributed energy resource management system (DERMS). One of the primary objectives of this work is to study and analyze several ADMS component and auxiliary systems. All the important component and auxiliary systems, SCADA, GISs, DMSs, AMRs/AMIs, OMSs, and DERMS, are discussed in this report. Their current generation technologies are analyzed, and their integration (or evolution) with an ADMS technology is discussed. An ADMS technology statemore » of the art and gap analysis is also presented. There are two technical gaps observed. The integration challenge between the component operational systems is the single largest challenge for ADMS design and deployment. Another significant challenge noted is concerning essential ADMS applications, for instance, fault location, isolation, and service restoration (FLISR), volt-var optimization (VVO), etc. There are a relatively small number of ADMS application developers as ADMS software platform is not open source. There is another critical gap and while not being technical in nature (when compared the two above) is still important to consider. The data models currently residing in utility GIS systems are either incomplete or inaccurate or both. This data is essential for planning and operations because it is typically one of the primary sources from which power system model are created. To achieve the full potential of ADMS, the ability to execute acute Power Flow solution is an important pre-requisite. These critical gaps are hindering wider Utility adoption of an ADMS technology. The development of an open architecture platform can eliminate many of these barriers and also aid seamless integration of distribution Utility legacy systems with an ADMS.« less

Wireless access to a pharmaceutical database: a demonstrator for data driven Wireless Application Protocol (WAP) applications in medical information processing.

PubMed

Schacht Hansen, M; Dørup, J

2001-01-01

The Wireless Application Protocol technology implemented in newer mobile phones has built-in facilities for handling much of the information processing needed in clinical work. To test a practical approach we ported a relational database of the Danish pharmaceutical catalogue to Wireless Application Protocol using open source freeware at all steps. We used Apache 1.3 web software on a Linux server. Data containing the Danish pharmaceutical catalogue were imported from an ASCII file into a MySQL 3.22.32 database using a Practical Extraction and Report Language script for easy update of the database. Data were distributed in 35 interrelated tables. Each pharmaceutical brand name was given its own card with links to general information about the drug, active substances, contraindications etc. Access was available through 1) browsing therapeutic groups and 2) searching for a brand name. The database interface was programmed in the server-side scripting language PHP3. A free, open source Wireless Application Protocol gateway to a pharmaceutical catalogue was established to allow dial-in access independent of commercial Wireless Application Protocol service providers. The application was tested on the Nokia 7110 and Ericsson R320s cellular phones. We have demonstrated that Wireless Application Protocol-based access to a dynamic clinical database can be established using open source freeware. The project opens perspectives for a further integration of Wireless Application Protocol phone functions in clinical information processing: Global System for Mobile communication telephony for bilateral communication, asynchronous unilateral communication via e-mail and Short Message Service, built-in calculator, calendar, personal organizer, phone number catalogue and Dictaphone function via answering machine technology. An independent Wireless Application Protocol gateway may be placed within hospital firewalls, which may be an advantage with respect to security. However, if Wireless Application Protocol phones are to become effective tools for physicians, special attention must be paid to the limitations of the devices. Input tools of Wireless Application Protocol phones should be improved, for instance by increased use of speech control.

Wireless access to a pharmaceutical database: A demonstrator for data driven Wireless Application Protocol applications in medical information processing

PubMed Central

Hansen, Michael Schacht

2001-01-01

Background The Wireless Application Protocol technology implemented in newer mobile phones has built-in facilities for handling much of the information processing needed in clinical work. Objectives To test a practical approach we ported a relational database of the Danish pharmaceutical catalogue to Wireless Application Protocol using open source freeware at all steps. Methods We used Apache 1.3 web software on a Linux server. Data containing the Danish pharmaceutical catalogue were imported from an ASCII file into a MySQL 3.22.32 database using a Practical Extraction and Report Language script for easy update of the database. Data were distributed in 35 interrelated tables. Each pharmaceutical brand name was given its own card with links to general information about the drug, active substances, contraindications etc. Access was available through 1) browsing therapeutic groups and 2) searching for a brand name. The database interface was programmed in the server-side scripting language PHP3. Results A free, open source Wireless Application Protocol gateway to a pharmaceutical catalogue was established to allow dial-in access independent of commercial Wireless Application Protocol service providers. The application was tested on the Nokia 7110 and Ericsson R320s cellular phones. Conclusions We have demonstrated that Wireless Application Protocol-based access to a dynamic clinical database can be established using open source freeware. The project opens perspectives for a further integration of Wireless Application Protocol phone functions in clinical information processing: Global System for Mobile communication telephony for bilateral communication, asynchronous unilateral communication via e-mail and Short Message Service, built-in calculator, calendar, personal organizer, phone number catalogue and Dictaphone function via answering machine technology. An independent Wireless Application Protocol gateway may be placed within hospital firewalls, which may be an advantage with respect to security. However, if Wireless Application Protocol phones are to become effective tools for physicians, special attention must be paid to the limitations of the devices. Input tools of Wireless Application Protocol phones should be improved, for instance by increased use of speech control. PMID:11720946

Visualizing petroleum systems with a combination of GIS and multimedia technologies: An example from the West Siberia Basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walsh, D.B.; Grace, J.D.

1996-12-31

Petroleum system studies provide an ideal application for the combination of Geographic Information System (GIS) and multimedia technologies. GIS technology is used to build and maintain the spatial and tabular data within the study region. Spatial data may comprise the zones of active source rocks and potential reservoir facies. Similarly, tabular data include the attendant source rock parameters (e.g. pyroloysis results, organic carbon content) and field-level exploration and production histories for the basin. Once the spatial and tabular data base has been constructed, GIS technology is useful in finding favorable exploration trends, such as zones of high organic content, maturemore » source rocks in positions adjacent to sealed, high porosity reservoir facies. Multimedia technology provides powerful visualization tools for petroleum system studies. The components of petroleum system development, most importantly generation, migration and trap development typically span periods of tens to hundreds of millions of years. The ability to animate spatial data over time provides an insightful alternative for studying the development of processes which are only captured in {open_quotes}snapshots{close_quotes} by static maps. New multimedia-authoring software provides this temporal dimension. The ability to record this data on CD-ROMs and allow user- interactivity further leverages the combination of spatial data bases, tabular data bases and time-based animations. The example used for this study was the Bazhenov-Neocomian petroleum system of West Siberia.« less

Visualizing petroleum systems with a combination of GIS and multimedia technologies: An example from the West Siberia Basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walsh, D.B.; Grace, J.D.

1996-01-01

Petroleum system studies provide an ideal application for the combination of Geographic Information System (GIS) and multimedia technologies. GIS technology is used to build and maintain the spatial and tabular data within the study region. Spatial data may comprise the zones of active source rocks and potential reservoir facies. Similarly, tabular data include the attendant source rock parameters (e.g. pyroloysis results, organic carbon content) and field-level exploration and production histories for the basin. Once the spatial and tabular data base has been constructed, GIS technology is useful in finding favorable exploration trends, such as zones of high organic content, maturemore » source rocks in positions adjacent to sealed, high porosity reservoir facies. Multimedia technology provides powerful visualization tools for petroleum system studies. The components of petroleum system development, most importantly generation, migration and trap development typically span periods of tens to hundreds of millions of years. The ability to animate spatial data over time provides an insightful alternative for studying the development of processes which are only captured in [open quotes]snapshots[close quotes] by static maps. New multimedia-authoring software provides this temporal dimension. The ability to record this data on CD-ROMs and allow user- interactivity further leverages the combination of spatial data bases, tabular data bases and time-based animations. The example used for this study was the Bazhenov-Neocomian petroleum system of West Siberia.« less

Extensible Probabilistic Repository Technology (XPRT)

DTIC Science & Technology

2004-10-01

projects, such as, Centaurus , Evidence Data Base (EDB), etc., others were fabricated, such as INS and FED, while others contain data from the open...Google Web Report Unlimited SOAP API News BBC News Unlimited WEB RSS 1.0 Centaurus Person Demographics 204,402 people from 240 countries...objects of the domain ontology map to the various simulated data-sources. For example, the PersonDemographics are stored in the Centaurus database, while

Crowd-Sourced Help with Emergent Knowledge for Optimized Formal Verification (CHEKOFV)

DTIC Science & Technology

2016-03-01

up game Binary Fission, which was deployed during Phase Two of CHEKOFV. Xylem: The Code of Plants is a casual game for players using mobile ...there are the design and engineering challenges of building a game infrastructure that integrates verification technology with crowd participation...the backend processes that annotate the originating software. Allowing players to construct their own equations opened up the flexibility to receive

A Disk-Based System for Producing and Distributing Science Products from MODIS

NASA Technical Reports Server (NTRS)

Masuoka, Edward; Wolfe, Robert; Sinno, Scott; Ye Gang; Teague, Michael

2007-01-01

Since beginning operations in 1999, the MODIS Adaptive Processing System (MODAPS) has evolved to take advantage of trends in information technology, such as the falling cost of computing cycles and disk storage and the availability of high quality open-source software (Linux, Apache and Perl), to achieve substantial gains in processing and distribution capacity and throughput while driving down the cost of system operations.

NASA Update for Unidata Stratcomm

NASA Technical Reports Server (NTRS)

Lynnes, Chris

2017-01-01

The NASA representative to the Unidata Strategic Committee presented a semiannual update on NASAs work with and use of Unidata technologies. The talk updated Unidata on the program of cloud computing prototypes underway for the Earth Observing System Data and Information System (EOSDIS). Also discussed was a trade study on the use of the Open source Project for a Network Data Access Protocol (OPeNDAP) with Web Object Storage in the cloud.

Robot Rocket Rally

NASA Image and Video Library

2014-03-14

CAPE CANAVERAL, Fla. – A visitor to the Robot Rocket Rally tries his hand at virtual reality in a demonstration of the Oculus Rift technology, provided by the Open Source Robotics Foundation. The three-day event at Florida's Kennedy Space Center Visitor Complex is highlighted by exhibits, games and demonstrations of a variety of robots, with exhibitors ranging from school robotics clubs to veteran NASA scientists and engineers. Photo credit: NASA/Kim Shiflett

Quality Attribute-Guided Evaluation of NoSQL Databases: An Experience Report

DTIC Science & Technology

2014-10-18

detailed technical evaluations of NoSQL databases specifically, and big data systems in general, that have become apparent during our study... big data , software systems [Agarwal 2011]. Internet-born organizations such as Google and Amazon are at the cutting edge of this revolution...Chang 2008], along with those of numerous other big data innovators, have made a variety of open source and commercial data management technologies

Application of Open Source Technologies for Oceanographic Data Analysis

NASA Astrophysics Data System (ADS)

Huang, T.; Gangl, M.; Quach, N. T.; Wilson, B. D.; Chang, G.; Armstrong, E. M.; Chin, T. M.; Greguska, F.

2015-12-01

NEXUS is a data-intensive analysis solution developed with a new approach for handling science data that enables large-scale data analysis by leveraging open source technologies such as Apache Cassandra, Apache Spark, Apache Solr, and Webification. NEXUS has been selected to provide on-the-fly time-series and histogram generation for the Soil Moisture Active Passive (SMAP) mission for Level 2 and Level 3 Active, Passive, and Active Passive products. It also provides an on-the-fly data subsetting capability. NEXUS is designed to scale horizontally, enabling it to handle massive amounts of data in parallel. It takes a new approach on managing time and geo-referenced array data by dividing data artifacts into chunks and stores them in an industry-standard, horizontally scaled NoSQL database. This approach enables the development of scalable data analysis services that can infuse and leverage the elastic computing infrastructure of the Cloud. It is equipped with a high-performance geospatial and indexed data search solution, coupled with a high-performance data Webification solution free from file I/O bottlenecks, as well as a high-performance, in-memory data analysis engine. In this talk, we will focus on the recently funded AIST 2014 project by using NEXUS as the core for oceanographic anomaly detection service and web portal. We call it, OceanXtremes

Open-Source Data and the Study of Homicide.

PubMed

Parkin, William S; Gruenewald, Jeff

2015-07-20

To date, no discussion has taken place in the social sciences as to the appropriateness of using open-source data to augment, or replace, official data sources in homicide research. The purpose of this article is to examine whether open-source data have the potential to be used as a valid and reliable data source in testing theory and studying homicide. Official and open-source homicide data were collected as a case study in a single jurisdiction over a 1-year period. The data sets were compared to determine whether open-sources could recreate the population of homicides and variable responses collected in official data. Open-source data were able to replicate the population of homicides identified in the official data. Also, for every variable measured, the open-sources captured as much, or more, of the information presented in the official data. Also, variables not available in official data, but potentially useful for testing theory, were identified in open-sources. The results of the case study show that open-source data are potentially as effective as official data in identifying individual- and situational-level characteristics, provide access to variables not found in official homicide data, and offer geographic data that can be used to link macro-level characteristics to homicide events. © The Author(s) 2015.

SensorWeb Hub infrastructure for open access to scientific research data

NASA Astrophysics Data System (ADS)

de Filippis, Tiziana; Rocchi, Leandro; Rapisardi, Elena

2015-04-01

The sharing of research data is a new challenge for the scientific community that may benefit from a large amount of information to solve environmental issues and sustainability in agriculture and urban contexts. Prerequisites for this challenge is the development of an infrastructure that ensure access, management and preservation of data, technical support for a coordinated and harmonious management of data that, in the framework of Open Data Policies, should encourages the reuse and the collaboration. The neogeography and the citizen as sensors approach, highlight that new data sources need a new set of tools and practices so to collect, validate, categorize, and use / access these "crowdsourced" data, that integrate the data sets produced in the scientific field, thus "feeding" the overall available data for analysis and research. When the scientific community embraces the dimension of collaboration and sharing, access and re-use, in order to accept the open innovation approach, it should redesign and reshape the processes of data management: the challenges of technological and cultural innovation, enabled by web 2.0 technologies, bring to the scenario where the sharing of structured and interoperable data will constitute the unavoidable building block to set up a new paradigm of scientific research. In this perspective the Institute of Biometeorology, CNR, whose aim is contributing to sharing and development of research data, has developed the "SensorWebHub" (SWH) infrastructure to support the scientific activities carried out in several research projects at national and international level. It is designed to manage both mobile and fixed open source meteorological and environmental sensors, in order to integrate the existing agro-meteorological and urban monitoring networks. The proposed architecture uses open source tools to ensure sustainability in the development and deployment of web applications with geographic features and custom analysis, as requested by the different research projects. The SWH components are organized in typical client-server architecture and interact from the sensing process to the representation of the results to the end-users. The Web Application enables to view and analyse the data stored in the GeoDB. The interface is designed following Internet browsers specifications allowing the visualization of collected data in different formats (tabular, chart and geographic map). The services for the dissemination of geo-referenced information, adopt the OGC specifications. SWH is a bottom-up collaborative initiative to share real time research data and pave the way for a open innovation approach in the scientific research. Until now this framework has been used for several WebGIS applications and WebApp for environmental monitoring at different temporal and spatial scales.

Feasibility study of solar energy in residential electricity generation

NASA Astrophysics Data System (ADS)

Solanki, Divyangsinh G.

With the increasing demand for energy and the concerns about the global environment, along with the steady progress in the field of renewable energy technologies, new opportunities and possibilities are opening up for an efficient utilization of renewable energy sources. Solar energy is undoubtedly the most clean, inexhaustible and abundant source of renewable energy. Photovoltaic (PV) technology is one of the most efficient mean to utilize solar power. The focus of this study was to establish economics of a residential photovoltaic system for a typical home in south Texas. The PV system serves the needs of a typical mid-size home inhibited by a typical family. Assumptions are made for the typical daily energy consumption, and the necessary equipments like solar arrays, batteries, inverter, etc. are sized and evaluated optimally so as to reduce the life cycle cost (LCC) of the system. Calculations are done taking into consideration the economic parameters concerned with the system.

How Is Open Source Special?

ERIC Educational Resources Information Center

Kapor, Mitchell

2005-01-01

Open source software projects involve the production of goods, but in software projects, the "goods" consist of information. The open source model is an alternative to the conventional centralized, command-and-control way in which things are usually made. In contrast, open source projects are genuinely decentralized and transparent. Transparent…

Common characteristics of open source software development and applicability for drug discovery: a systematic review.

PubMed

Ardal, Christine; Alstadsæter, Annette; Røttingen, John-Arne

2011-09-28

Innovation through an open source model has proven to be successful for software development. This success has led many to speculate if open source can be applied to other industries with similar success. We attempt to provide an understanding of open source software development characteristics for researchers, business leaders and government officials who may be interested in utilizing open source innovation in other contexts and with an emphasis on drug discovery. A systematic review was performed by searching relevant, multidisciplinary databases to extract empirical research regarding the common characteristics and barriers of initiating and maintaining an open source software development project. Common characteristics to open source software development pertinent to open source drug discovery were extracted. The characteristics were then grouped into the areas of participant attraction, management of volunteers, control mechanisms, legal framework and physical constraints. Lastly, their applicability to drug discovery was examined. We believe that the open source model is viable for drug discovery, although it is unlikely that it will exactly follow the form used in software development. Hybrids will likely develop that suit the unique characteristics of drug discovery. We suggest potential motivations for organizations to join an open source drug discovery project. We also examine specific differences between software and medicines, specifically how the need for laboratories and physical goods will impact the model as well as the effect of patents.

An informatics model for guiding assembly of telemicrobiology workstations for malaria collaborative diagnostics using commodity products and open-source software.

PubMed

Suhanic, West; Crandall, Ian; Pennefather, Peter

2009-07-17

Deficits in clinical microbiology infrastructure exacerbate global infectious disease burdens. This paper examines how commodity computation, communication, and measurement products combined with open-source analysis and communication applications can be incorporated into laboratory medicine microbiology protocols. Those commodity components are all now sourceable globally. An informatics model is presented for guiding the use of low-cost commodity components and free software in the assembly of clinically useful and usable telemicrobiology workstations. The model incorporates two general principles: 1) collaborative diagnostics, where free and open communication and networking applications are used to link distributed collaborators for reciprocal assistance in organizing and interpreting digital diagnostic data; and 2) commodity engineering, which leverages globally available consumer electronics and open-source informatics applications, to build generic open systems that measure needed information in ways substantially equivalent to more complex proprietary systems. Routine microscopic examination of Giemsa and fluorescently stained blood smears for diagnosing malaria is used as an example to validate the model. The model is used as a constraint-based guide for the design, assembly, and testing of a functioning, open, and commoditized telemicroscopy system that supports distributed acquisition, exploration, analysis, interpretation, and reporting of digital microscopy images of stained malarial blood smears while also supporting remote diagnostic tracking, quality assessment and diagnostic process development. The open telemicroscopy workstation design and use-process described here can address clinical microbiology infrastructure deficits in an economically sound and sustainable manner. It can boost capacity to deal with comprehensive measurement of disease and care outcomes in individuals and groups in a distributed and collaborative fashion. The workstation enables local control over the creation and use of diagnostic data, while allowing for remote collaborative support of diagnostic data interpretation and tracking. It can enable global pooling of malaria disease information and the development of open, participatory, and adaptable laboratory medicine practices. The informatic model highlights how the larger issue of access to generic commoditized measurement, information processing, and communication technology in both high- and low-income countries can enable diagnostic services that are much less expensive, but substantially equivalent to those currently in use in high-income countries.

OSG-GEM: Gene Expression Matrix Construction Using the Open Science Grid.

PubMed

Poehlman, William L; Rynge, Mats; Branton, Chris; Balamurugan, D; Feltus, Frank A

2016-01-01

High-throughput DNA sequencing technology has revolutionized the study of gene expression while introducing significant computational challenges for biologists. These computational challenges include access to sufficient computer hardware and functional data processing workflows. Both these challenges are addressed with our scalable, open-source Pegasus workflow for processing high-throughput DNA sequence datasets into a gene expression matrix (GEM) using computational resources available to U.S.-based researchers on the Open Science Grid (OSG). We describe the usage of the workflow (OSG-GEM), discuss workflow design, inspect performance data, and assess accuracy in mapping paired-end sequencing reads to a reference genome. A target OSG-GEM user is proficient with the Linux command line and possesses basic bioinformatics experience. The user may run this workflow directly on the OSG or adapt it to novel computing environments.

OSG-GEM: Gene Expression Matrix Construction Using the Open Science Grid

PubMed Central

Poehlman, William L.; Rynge, Mats; Branton, Chris; Balamurugan, D.; Feltus, Frank A.

2016-01-01

High-throughput DNA sequencing technology has revolutionized the study of gene expression while introducing significant computational challenges for biologists. These computational challenges include access to sufficient computer hardware and functional data processing workflows. Both these challenges are addressed with our scalable, open-source Pegasus workflow for processing high-throughput DNA sequence datasets into a gene expression matrix (GEM) using computational resources available to U.S.-based researchers on the Open Science Grid (OSG). We describe the usage of the workflow (OSG-GEM), discuss workflow design, inspect performance data, and assess accuracy in mapping paired-end sequencing reads to a reference genome. A target OSG-GEM user is proficient with the Linux command line and possesses basic bioinformatics experience. The user may run this workflow directly on the OSG or adapt it to novel computing environments. PMID:27499617

Open Source Paradigm: A Synopsis of The Cathedral and the Bazaar for Health and Social Care.

PubMed

Benson, Tim

2016-07-04

Open source software (OSS) is becoming more fashionable in health and social care, although the ideas are not new. However progress has been slower than many had expected. The purpose is to summarise the Free/Libre Open Source Software (FLOSS) paradigm in terms of what it is, how it impacts users and software engineers and how it can work as a business model in health and social care sectors. Much of this paper is a synopsis of Eric Raymond's seminal book The Cathedral and the Bazaar, which was the first comprehensive description of the open source ecosystem, set out in three long essays. Direct quotes from the book are used liberally, without reference to specific passages. The first part contrasts open and closed source approaches to software development and support. The second part describes the culture and practices of the open source movement. The third part considers business models. A key benefit of open source is that users can access and collaborate on improving the software if they wish. Closed source code may be regarded as a strategic business risk that that may be unacceptable if there is an open source alternative. The sharing culture of the open source movement fits well with that of health and social care.

Technology in Parkinson disease: Challenges and Opportunities

PubMed Central

Espay, Alberto J.; Bonato, Paolo; Nahab, Fatta; Maetzler, Walter; Dean, John M.; Klucken, Jochen; Eskofier, Bjoern M.; Merola, Aristide; Horak, Fay; Lang, Anthony E.; Reilmann, Ralf; Giuffrida, Joe; Nieuwboer, Alice; Horne, Malcolm; Little, Max A.; Litvan, Irene; Simuni, Tanya; Dorsey, E. Ray; Burack, Michelle A.; Kubota, Ken; Kamondi, Anita; Godinho, Catarina; Daneault, Jean-Francois; Mitsi, Georgia; Krinke, Lothar; Hausdorff, Jeffery M.; Bloem, Bastiaan R.; Papapetropoulos, Spyros

2016-01-01

The miniaturization, sophistication, proliferation, and accessibility of technologies are enabling the capturing of more and previously inaccessible phenomena in Parkinson disease (PD). However, more information has not translated into greater understanding of disease complexity to satisfy diagnostic and therapeutic needs. Challenges include non-compatible technology platforms, the need for wide-scale and long-term deployment of sensor technology (in particular among vulnerable elderly patients), and the gap between the “big data” acquired with sensitive measurement technologies and their limited clinical application. Major opportunities could be realized if new technologies are developed as part of open-source and/or open-hardware platforms enabling multi-channel data capture, sensitive to the broad range of motor and non-motor problems that characterize PD, and adaptable into self-adjusting, individualized treatment delivery systems. The International Parkinson and Movement Disorders Society Task Force on Technology is entrusted to convene engineers, clinicians, researchers, and patients to promote the development of integrated measurement and closed-loop therapeutic systems with high patient adherence that also serve to: 1) encourage the adoption of clinico-pathophysiologic phenotyping and early detection of critical disease milestones; 2) enhance tailoring of symptomatic therapy; 3) improve subgroup targeting of patients for future testing of disease modifying treatments; and 4) identify objective biomarkers to improve longitudinal tracking of impairments in clinical care and research. This article summarizes the work carried out by the Task Force toward identifying challenges and opportunities in the development of technologies with potential for improving the clinical management and quality of life of individuals with PD. PMID:27125836

Weather forecasting with open source software

NASA Astrophysics Data System (ADS)

Rautenhaus, Marc; Dörnbrack, Andreas

2013-04-01

To forecast the weather situation during aircraft-based atmospheric field campaigns, we employ a tool chain of existing and self-developed open source software tools and open standards. Of particular value are the Python programming language with its extension libraries NumPy, SciPy, PyQt4, Matplotlib and the basemap toolkit, the NetCDF standard with the Climate and Forecast (CF) Metadata conventions, and the Open Geospatial Consortium Web Map Service standard. These open source libraries and open standards helped to implement the "Mission Support System", a Web Map Service based tool to support weather forecasting and flight planning during field campaigns. The tool has been implemented in Python and has also been released as open source (Rautenhaus et al., Geosci. Model Dev., 5, 55-71, 2012). In this presentation we discuss the usage of free and open source software for weather forecasting in the context of research flight planning, and highlight how the field campaign work benefits from using open source tools and open standards.

Nuclear power grows in China`s energy mix

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Xavier

1996-07-01

China`s rapid economic growth in the past two decades has caused the nations`s demand for electricity to exceed its capacity. AS of 1992, with power shortages as high as 25 percent, {open_quotes}power plant operators were often forced to resort to rolling brownouts to avoid complete system breakdowns,{close_quotes} says Xavier Chen, an assistant professor with the Asian Institute of Technology`s Energy Program in Bangkok, Thailand. To keep pace with China`s economic development, Chen estimates that {open_quotes}China must increase its electricity capacity 6 to 8 percent a year each year into the foreseeable future.{close_quotes} For now, coal is transported to power plantsmore » in the rapidly developing eastern coastal provinces at great expense. Chen also notes that the environmental disadvantages of coal make it a less desirable source of energy than nuclear. Development of nuclear energy is likely to go forward for another reason: In China, there is much less opposition to nuclear power plants than in other developing nations. {open_quotes}Nuclear energy likely will plan an important role in China`s future energy mix and help close the gap between electricity production and demand,{close_quotes} Chen says.« less

State of the art and taxonomy of prognostics approaches, trends of prognostics applications and open issues towards maturity at different technology readiness levels

NASA Astrophysics Data System (ADS)

Javed, Kamran; Gouriveau, Rafael; Zerhouni, Noureddine

2017-09-01

Integrating prognostics to a real application requires a certain maturity level and for this reason there is a lack of success stories about development of a complete Prognostics and Health Management system. In fact, the maturity of prognostics is closely linked to data and domain specific entities like modeling. Basically, prognostics task aims at predicting the degradation of engineering assets. However, practically it is not possible to precisely predict the impending failure, which requires a thorough understanding to encounter different sources of uncertainty that affect prognostics. Therefore, different aspects crucial to the prognostics framework, i.e., from monitoring data to remaining useful life of equipment need to be addressed. To this aim, the paper contributes to state of the art and taxonomy of prognostics approaches and their application perspectives. In addition, factors for prognostics approach selection are identified, and new case studies from component-system level are discussed. Moreover, open challenges toward maturity of the prognostics under uncertainty are highlighted and scheme for an efficient prognostics approach is presented. Finally, the existing challenges for verification and validation of prognostics at different technology readiness levels are discussed with respect to open challenges.

Open Source Software Development

DTIC Science & Technology

2011-01-01

Software, 2002, 149(1), 3-17. 3. DiBona , C., Cooper, D., and Stone, M. (Eds.), Open Sources 2.0, 2005, O’Reilly Media, Sebastopol, CA. Also see, C... DiBona , S. Ockman, and M. Stone (Eds.). Open Sources: Vocides from the Open Source Revolution, 1999. O’Reilly Media, Sebastopol, CA. 4. Ducheneaut, N

OpenID Connect as a security service in cloud-based medical imaging systems.

PubMed

Ma, Weina; Sartipi, Kamran; Sharghigoorabi, Hassan; Koff, David; Bak, Peter

2016-04-01

The evolution of cloud computing is driving the next generation of medical imaging systems. However, privacy and security concerns have been consistently regarded as the major obstacles for adoption of cloud computing by healthcare domains. OpenID Connect, combining OpenID and OAuth together, is an emerging representational state transfer-based federated identity solution. It is one of the most adopted open standards to potentially become the de facto standard for securing cloud computing and mobile applications, which is also regarded as "Kerberos of cloud." We introduce OpenID Connect as an authentication and authorization service in cloud-based diagnostic imaging (DI) systems, and propose enhancements that allow for incorporating this technology within distributed enterprise environments. The objective of this study is to offer solutions for secure sharing of medical images among diagnostic imaging repository (DI-r) and heterogeneous picture archiving and communication systems (PACS) as well as Web-based and mobile clients in the cloud ecosystem. The main objective is to use OpenID Connect open-source single sign-on and authorization service and in a user-centric manner, while deploying DI-r and PACS to private or community clouds should provide equivalent security levels to traditional computing model.

Real-time image processing for non-contact monitoring of dynamic displacements using smartphone technologies

NASA Astrophysics Data System (ADS)

Min, Jae-Hong; Gelo, Nikolas J.; Jo, Hongki

2016-04-01

The newly developed smartphone application, named RINO, in this study allows measuring absolute dynamic displacements and processing them in real time using state-of-the-art smartphone technologies, such as high-performance graphics processing unit (GPU), in addition to already powerful CPU and memories, embedded high-speed/ resolution camera, and open-source computer vision libraries. A carefully designed color-patterned target and user-adjustable crop filter enable accurate and fast image processing, allowing up to 240fps for complete displacement calculation and real-time display. The performances of the developed smartphone application are experimentally validated, showing comparable accuracy with those of conventional laser displacement sensor.

Emerging solid-state laser technology by lidar/DIAL remote sensing

NASA Technical Reports Server (NTRS)

Killinger, Dennis

1992-01-01

Significant progress has been made in recent years in the development of new, solid-state laser sources. This talk will present an overview of some of the new developments in solid-state lasers, and their application toward lidar/DIAL measurements of the atmosphere. Newly emerging lasers such as Ho:YAG, Tm:YAG, OPO, and Ti:Sapphire will be covered, along with the spectroscopic parameters required for differential operational modes of atmospheric remote sensing including Doppler-Windshear lidar, Tunable laser detection of water/CO2, and broad linewidth OPO's for open path detection of pollutant hydrocarbon gases. Additional considerations of emerging laser technology for lidar/DIAL will also be covered.

OpenCourseWare and Open Educational Resources: The Next Big Thing in Technology-Enhanced Education?

ERIC Educational Resources Information Center

Caudill, Jason G.

2012-01-01

OpenCourseWare (OCW) and Open Educational Resources (OER) are two new and closely related educational technologies. Both provide open access to learning materials for students and instructors via the Internet. These are for the moment still very young technologies. While they have grown dramatically in just ten years there is still relatively…

Utilizing Free and Open Source Software to access, view and compare in situ observations, EO products and model output data

NASA Astrophysics Data System (ADS)

Vines, Aleksander; Hamre, Torill; Lygre, Kjetil

2014-05-01

The GreenSeas project (Development of global plankton data base and model system for eco-climate early warning) aims to advance the knowledge and predictive capacities of how marine ecosystems will respond to global change. A main task has been to set up a data delivery and monitoring core service following the open and free data access policy implemented in the Global Monitoring for the Environment and Security (GMES) programme. The aim is to ensure open and free access to historical plankton data, new data (EO products and in situ measurements), model data (including estimates of simulation error) and biological, environmental and climatic indicators to a range of stakeholders, such as scientists, policy makers and environmental managers. To this end, we have developed a geo-spatial database of both historical and new in situ physical, biological and chemical parameters for the Southern Ocean, Atlantic, Nordic Seas and the Arctic, and organized related satellite-derived quantities and model forecasts in a joint geo-spatial repository. For easy access to these data, we have implemented a web-based GIS (Geographical Information Systems) where observed, derived and forcasted parameters can be searched, displayed, compared and exported. Model forecasts can also be uploaded dynamically to the system, to allow modelers to quickly compare their results with available in situ and satellite observations. We have implemented the web-based GIS(Geographical Information Systems) system based on free and open source technologies: Thredds Data Server, ncWMS, GeoServer, OpenLayers, PostGIS, Liferay, Apache Tomcat, PRTree, NetCDF-Java, json-simple, Geotoolkit, Highcharts, GeoExt, MapFish, FileSaver, jQuery, jstree and qUnit. We also wanted to used open standards to communicate between the different services and we use WMS, WFS, netCDF, GML, OPeNDAP, JSON, and SLD. The main advantage we got from using FOSS was that we did not have to invent the wheel all over again, but could use already existing code and functionalities on our software for free: Of course most the software did not have to be open source for this, but in some cases we had to do minor modifications to make the different technologies work together. We could extract the parts of the code that we needed for a specific task. One example of this was to use part of the code from ncWMS and Thredds to help our main application to both read netCDF files and present them in the browser. This presentation will focus on both difficulties we had with and advantages we got from developing this tool with FOSS.

Open-source hardware for medical devices

PubMed Central

2016-01-01

Open-source hardware is hardware whose design is made publicly available so anyone can study, modify, distribute, make and sell the design or the hardware based on that design. Some open-source hardware projects can potentially be used as active medical devices. The open-source approach offers a unique combination of advantages, including reducing costs and faster innovation. This article compares 10 of open-source healthcare projects in terms of how easy it is to obtain the required components and build the device. PMID:27158528

Open-source hardware for medical devices.

PubMed

Niezen, Gerrit; Eslambolchilar, Parisa; Thimbleby, Harold

2016-04-01

Open-source hardware is hardware whose design is made publicly available so anyone can study, modify, distribute, make and sell the design or the hardware based on that design. Some open-source hardware projects can potentially be used as active medical devices. The open-source approach offers a unique combination of advantages, including reducing costs and faster innovation. This article compares 10 of open-source healthcare projects in terms of how easy it is to obtain the required components and build the device.

The case for open-source software in drug discovery.

PubMed

DeLano, Warren L

2005-02-01

Widespread adoption of open-source software for network infrastructure, web servers, code development, and operating systems leads one to ask how far it can go. Will "open source" spread broadly, or will it be restricted to niches frequented by hopeful hobbyists and midnight hackers? Here we identify reasons for the success of open-source software and predict how consumers in drug discovery will benefit from new open-source products that address their needs with increased flexibility and in ways complementary to proprietary options.

Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone

PubMed Central

Paulsen, Samantha J.; Hwang, Daniel H.; Ta, Anderson H.; Yalacki, David R.; Schmidt, Tim; Miller, Jordan S.

2016-01-01

Selective Laser Sintering (SLS) is an additive manufacturing process that uses a laser to fuse powdered starting materials into solid 3D structures. Despite the potential for fabrication of complex, high-resolution structures with SLS using diverse starting materials (including biomaterials), prohibitive costs of commercial SLS systems have hindered the wide adoption of this technology in the scientific community. Here, we developed a low-cost, open-source SLS system (OpenSLS) and demonstrated its capacity to fabricate structures in nylon with sub-millimeter features and overhanging regions. Subsequently, we demonstrated fabrication of polycaprolactone (PCL) into macroporous structures such as a diamond lattice. Widespread interest in using PCL for bone tissue engineering suggests that PCL lattices are relevant model scaffold geometries for engineering bone. SLS of materials with large powder grain size (~500 μm) leads to part surfaces with high roughness, so we further introduced a simple vapor-smoothing technique to reduce the surface roughness of sintered PCL structures which further improves their elastic modulus and yield stress. Vapor-smoothed PCL can also be used for sacrificial templating of perfusable fluidic networks within orthogonal materials such as poly(dimethylsiloxane) silicone. Finally, we demonstrated that human mesenchymal stem cells were able to adhere, survive, and differentiate down an osteogenic lineage on sintered and smoothed PCL surfaces, suggesting that OpenSLS has the potential to produce PCL scaffolds useful for cell studies. OpenSLS provides the scientific community with an accessible platform for the study of laser sintering and the fabrication of complex geometries in diverse materials. PMID:26841023

Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone.

PubMed

Kinstlinger, Ian S; Bastian, Andreas; Paulsen, Samantha J; Hwang, Daniel H; Ta, Anderson H; Yalacki, David R; Schmidt, Tim; Miller, Jordan S

2016-01-01

Selective Laser Sintering (SLS) is an additive manufacturing process that uses a laser to fuse powdered starting materials into solid 3D structures. Despite the potential for fabrication of complex, high-resolution structures with SLS using diverse starting materials (including biomaterials), prohibitive costs of commercial SLS systems have hindered the wide adoption of this technology in the scientific community. Here, we developed a low-cost, open-source SLS system (OpenSLS) and demonstrated its capacity to fabricate structures in nylon with sub-millimeter features and overhanging regions. Subsequently, we demonstrated fabrication of polycaprolactone (PCL) into macroporous structures such as a diamond lattice. Widespread interest in using PCL for bone tissue engineering suggests that PCL lattices are relevant model scaffold geometries for engineering bone. SLS of materials with large powder grain size (~500 μm) leads to part surfaces with high roughness, so we further introduced a simple vapor-smoothing technique to reduce the surface roughness of sintered PCL structures which further improves their elastic modulus and yield stress. Vapor-smoothed PCL can also be used for sacrificial templating of perfusable fluidic networks within orthogonal materials such as poly(dimethylsiloxane) silicone. Finally, we demonstrated that human mesenchymal stem cells were able to adhere, survive, and differentiate down an osteogenic lineage on sintered and smoothed PCL surfaces, suggesting that OpenSLS has the potential to produce PCL scaffolds useful for cell studies. OpenSLS provides the scientific community with an accessible platform for the study of laser sintering and the fabrication of complex geometries in diverse materials.

Sensing Slow Mobility and Interesting Locations for Lombardy Region (italy): a Case Study Using Pointwise Geolocated Open Data

NASA Astrophysics Data System (ADS)

Brovelli, M. A.; Oxoli, D.; Zurbarán, M. A.

2016-06-01

During the past years Web 2.0 technologies have caused the emergence of platforms where users can share data related to their activities which in some cases are then publicly released with open licenses. Popular categories for this include community platforms where users can upload GPS tracks collected during slow travel activities (e.g. hiking, biking and horse riding) and platforms where users share their geolocated photos. However, due to the high heterogeneity of the information available on the Web, the sole use of these user-generated contents makes it an ambitious challenge to understand slow mobility flows as well as to detect the most visited locations in a region. Exploiting the available data on community sharing websites allows to collect near real-time open data streams and enables rigorous spatial-temporal analysis. This work presents an approach for collecting, unifying and analysing pointwise geolocated open data available from different sources with the aim of identifying the main locations and destinations of slow mobility activities. For this purpose, we collected pointwise open data from the Wikiloc platform, Twitter, Flickr and Foursquare. The analysis was confined to the data uploaded in Lombardy Region (Northern Italy) - corresponding to millions of pointwise data. Collected data was processed through the use of Free and Open Source Software (FOSS) in order to organize them into a suitable database. This allowed to run statistical analyses on data distribution in both time and space by enabling the detection of users' slow mobility preferences as well as places of interest at a regional scale.

Mid-infrared coincidence measurements based on intracavity frequency conversion

NASA Astrophysics Data System (ADS)

Piccione, S.; Mancinelli, M.; Trenti, A.; Fontana, G.; Dam, J.; Tidemand-Lichtenberg, P.; Pedersen, C.; Pavesi, L.

2018-02-01

In the last years, the Mid Infrared (MIR) spectral region has attracted the attention of many areas of science and technology, opening the way to important applications, such as molecular imaging, remote sensing, free- space communication and environmental monitoring. However, the development of new sources of light, such as quantum cascade laser, was not followed by an adequate improvement in the MIR detection system, able to exceed the current challenges. Here we demonstrate the single-photon counting capability of a new detection system, based on efficient up-converter modules, by proving the correlated nature of twin photons pairs at about 3.1μm, opening the way to the extension of quantum optics experiments in the MIR.

Ethoscopes: An open platform for high-throughput ethomics

PubMed Central

Geissmann, Quentin; Garcia Rodriguez, Luis; Beckwith, Esteban J.; French, Alice S.; Jamasb, Arian R.

2017-01-01

Here, we present the use of ethoscopes, which are machines for high-throughput analysis of behavior in Drosophila and other animals. Ethoscopes provide a software and hardware solution that is reproducible and easily scalable. They perform, in real-time, tracking and profiling of behavior by using a supervised machine learning algorithm, are able to deliver behaviorally triggered stimuli to flies in a feedback-loop mode, and are highly customizable and open source. Ethoscopes can be built easily by using 3D printing technology and rely on Raspberry Pi microcomputers and Arduino boards to provide affordable and flexible hardware. All software and construction specifications are available at http://lab.gilest.ro/ethoscope. PMID:29049280

HEPData: a repository for high energy physics data

NASA Astrophysics Data System (ADS)

Maguire, Eamonn; Heinrich, Lukas; Watt, Graeme

2017-10-01

The Durham High Energy Physics Database (HEPData) has been built up over the past four decades as a unique open-access repository for scattering data from experimental particle physics papers. It comprises data points underlying several thousand publications. Over the last two years, the HEPData software has been completely rewritten using modern computing technologies as an overlay on the Invenio v3 digital library framework. The software is open source with the new site available at https://hepdata.net now replacing the previous site at http://hepdata.cedar.ac.uk. In this write-up, we describe the development of the new site and explain some of the advantages it offers over the previous platform.

Technology of interdisciplinary open-ended designing in engineering education

NASA Astrophysics Data System (ADS)

Isaev, A. P.; Plotnikov, L. V.; Fomin, N. I.

2017-11-01

Author’s technology of interdisciplinary open-ended engineering is presented in this article. This technology is an integrated teaching method that significantly increases the practical component in the educational program. Author’s technology creates the conditions to overcome the shortcomings in the engineering education. The basic ideas of the technology of open-ended engineering, experience of their implementation in higher education and the author’s vision of the teaching technology are examined in the article. The main stages of development process of the author’s technology of open-ended engineering to prepare students (bachelor) of technical profile are presented in the article. Complex of the methodological tools and procedures is shown in the article. This complex is the basis of the developed training technology that is used in educational process in higher school of engineering (UrFU). The organizational model of the technology of open-ended engineering is presented. Organizational model integrates the functions in the creation and implementation of all educational program. Analysis of the characteristics of educational activity of students working on author’s technology of interdisciplinary open-ended engineering is presented. Intermediate results of the application of author’s technology in the educational process of the engineering undergraduate are shown.

The Role of Semantics in Open-World, Integrative, Collaborative Science Data Platforms

NASA Astrophysics Data System (ADS)

Fox, Peter; Chen, Yanning; Wang, Han; West, Patrick; Erickson, John; Ma, Marshall

2014-05-01

As collaborative science spreads into more and more Earth and space science fields, both participants and funders are expressing stronger needs for highly functional data and information capabilities. Characteristics include a) easy to use, b) highly integrated, c) leverage investments, d) accommodate rapid technical change, and e) do not incur undue expense or time to build or maintain - these are not a small set of requirements. Based on our accumulated experience over the last ~ decade and several key technical approaches, we adapt, extend, and integrate several open source applications and frameworks to handle major portions of functionality for these platforms. This includes: an object-type repository, collaboration tools, identity management, all within a portal managing diverse content and applications. In this contribution, we present our methods and results of information models, adaptation, integration and evolution of a networked data science architecture based on several open source technologies (Drupal, VIVO, the Comprehensive Knowledge Archive Network; CKAN, and the Global Handle System; GHS). In particular we present the Deep Carbon Observatory - a platform for international science collaboration. We present and discuss key functional and non-functional attributes, and discuss the general applicability of the platform.

Choosing Open Source ERP Systems: What Reasons Are There For Doing So?

NASA Astrophysics Data System (ADS)

Johansson, Björn; Sudzina, Frantisek

Enterprise resource planning (ERP) systems attract a high attention and open source software does it as well. The question is then if, and if so, when do open source ERP systems take off. The paper describes the status of open source ERP systems. Based on literature review of ERP system selection criteria based on Web of Science articles, it discusses reported reasons for choosing open source or proprietary ERP systems. Last but not least, the article presents some conclusions that could act as input for future research. The paper aims at building up a foundation for the basic question: What are the reasons for an organization to adopt open source ERP systems.

Massive Open Online Courses in Dental Education: Two Viewpoints: Viewpoint 1: Massive Open Online Courses Offer Transformative Technology for Dental Education and Viewpoint 2: Massive Open Online Courses Are Not Ready for Primetime.

PubMed

Kearney, Rachel C; Premaraj, Sundaralingam; Smith, Becky M; Olson, Gregory W; Williamson, Anne E; Romanos, Georgios

2016-02-01

This point/counterpoint article discusses the strengths and weaknesses of incorporating Massive Open Online Courses (MOOCs) into dental education, focusing on whether this relatively new educational modality could impact traditional dental curricula. Viewpoint 1 asserts that MOOCs can be useful in dental education because they offer an opportunity for students to learn through content and assessment that is delivered online. While specific research on MOOCs is limited, some evidence shows that online courses may produce similar learning outcomes to those in face-to-face courses. Given that MOOCs are intended to be open source, there could be opportunities for dental schools with faculty shortages and financial constraints to incorporate these courses into their curricula. In addition to saving money, dental schools could use MOOCs as revenue sources in areas such as continuing education. Viewpoint 2 argues that the hype over MOOCs is subsiding due in part to weaker than expected evidence about their value. Because direct contact between students, instructors, and patients is essential to the dental curriculum, MOOCs have yet to demonstrate their usefulness in replacing more than a subset of didactic courses. Additionally, learning professionalism, a key component of health professions education, is best supported by mentorship that provides significant interpersonal interaction. In spite of the potential of early MOOC ideology, MOOCs in their current form require either further development or altered expectations to significantly impact dental education.

Developing open-source codes for electromagnetic geophysics using industry support

NASA Astrophysics Data System (ADS)

Key, K.

2017-12-01

Funding for open-source software development in academia often takes the form of grants and fellowships awarded by government bodies and foundations where there is no conflict-of-interest between the funding entity and the free dissemination of the open-source software products. Conversely, funding for open-source projects in the geophysics industry presents challenges to conventional business models where proprietary licensing offers value that is not present in open-source software. Such proprietary constraints make it easier to convince companies to fund academic software development under exclusive software distribution agreements. A major challenge for obtaining commercial funding for open-source projects is to offer a value proposition that overcomes the criticism that such funding is a give-away to the competition. This work draws upon a decade of experience developing open-source electromagnetic geophysics software for the oil, gas and minerals exploration industry, and examines various approaches that have been effective for sustaining industry sponsorship.

Development of a Microfluidic Open Interface with Flow Isolated Desorption Volume for the Direct Coupling of SPME Devices to Mass Spectrometry.

PubMed

Tascon, Marcos; Alam, Md Nazmul; Gómez-Ríos, Germán Augusto; Pawliszyn, Janusz

2018-02-20

Technologies that efficiently integrate the sampling and sample preparation steps with direct introduction to mass spectrometry (MS), providing simple and sensitive analytical workflows as well as capabilities for automation, can generate a great impact in a vast variety of fields, such as in clinical, environmental, and food-science applications. In this study, a novel approach that facilitates direct coupling of Bio-SPME devices to MS using a microfluidic design is presented. This technology, named microfluidic open interface (MOI), which operates under the concept of flow-isolated desorption volume, consists of an open-to-ambient desorption chamber (V ≤ 7 μL) connected to an ionization source. Subsequently, compounds of interest are transported to the ionization source by means of the self-aspiration process intrinsic of these interfaces. Thus, any ionization technology that provides a reliable and constant suction, such as electrospray ionization (ESI), atmospheric-pressure chemical ionization (APCI), or inductively coupled plasma ionization (ICP), can be hyphenated to MOI. Using this setup, the desorption chamber is used to release target compounds from the coating, while the isolation of the flow enables the ionization source to be continuously fed with solvent, all without the necessity of employment of additional valves. As a proof of concept, the design was applied to an ESI-MS/MS system for experimental validation. Furthermore, numerical simulations were undertaken to provide a detailed understanding of the fluid flow pattern inside the interface, then used to optimize the system for better efficiency. The analytical workflow of the developed Bio-SPME-MOI-MS setup consists of the direct immersion of SPME fibers into the matrix to extract/enrich analytes of interest within a short period of time, followed by a rinsing step with water to remove potentially adhering proteins, salts, and/or other interfering compounds. Next, the fiber is inserted into the MOI for desorption of compounds of interest. Finally, the volume contained in the chamber is drained and moved toward the electrospray needle for ionization and direct introduction to MS. Aiming to validate the technology, the fast determination of selected immunosuppressive drugs (e.g., tacrolimus, cyclosporine, sirolimus, and everolimus) from 100 μL of whole blood was assessed. Limits of quantitation in the subppb range were obtained for all studied compounds. Good linearity (r 2 ≥ 0.99) and excellent precision, with (8%) and without (14%) internal standard correction, were attained.

NDEx - the Network Data Exchange, A Network Commons for Biologists | Informatics Technology for Cancer Research (ITCR)

Cancer.gov

Network models of biology, whether curated or derived from large-scale data analysis, are critical tools in the understanding of cancer mechanisms and in the design and personalization of therapies. The NDEx Project (Network Data Exchange) will create, deploy, and maintain an open-source, web-based software platform and public website to enable scientists, organizations, and software applications to share, store, manipulate, and publish biological networks.

A Comparison of Monte Carlo Tree Search and Rolling Horizon Optimization for Large Scale Dynamic Resource Allocation Problems

DTIC Science & Technology

2015-05-01

decisions on the fly in an online retail environment. Tech. rep., Working Paper, Massachusetts Institute of Technology, Boston, MA. Arneson, Broderick , Ryan...Hayward, Philip Henderson. 2009. MoHex wins Hex tournament. International Computer Games Association Journal 32 114–116. Arneson, Broderick , Ryan B...Combina- torial Search. Enzenberger, Markus, Martin Muller, Broderick Arneson, Richard Segal. 2010. Fuego—an open-source framework for board games and

China Report, Economic Affairs, Energy: Status and Development -- XXVI

DTIC Science & Technology

1984-04-09

better technology for open-cut mining; — renovating 9 railway trunk lines while building 8 new ones, bringing the total number in the area up to 20 and...CSO: 4013/119 91 SUPPLEMENTAL SOURCES CHINA’S SOLAR ENERGY RESOURCE DISTRIBUTION ANALYZED Beijing TAIYANGNENG XUEBAO [ACTA ENERGIAE SOLARIS...Calculation in Our Country, TAIYANGNENG XUEBAO [ACTA ENERGIAE SOLARIS SINICA], Vol 1, 1980 pp 1-9. 12553 CSO: 4013/19 102 CONSERVATION CONSERVATION

Google Sky as an Interactive Content Delivery System

NASA Astrophysics Data System (ADS)

Parrish, Michael

2009-05-01

In support of the International Year of Astronomy New Media Task Group's mission to create online astronomy content, several existing technologies are being leveraged. With this undertaking in mind, Google Sky provides an immersive contextual environment for both exploration and content presentation. As such, it affords opportunities for new methods of interactive media delivery. Traditional astronomy news sources and blogs are able to literally set a story at the location of their topic. Furthermore, audio based material can be complimented by a series of locations in the form of a guided tour. In order to provide automated generation and management of this content, an open source software suite has been developed.

OpenHelix: bioinformatics education outside of a different box.

PubMed

Williams, Jennifer M; Mangan, Mary E; Perreault-Micale, Cynthia; Lathe, Scott; Sirohi, Neeraj; Lathe, Warren C

2010-11-01

The amount of biological data is increasing rapidly, and will continue to increase as new rapid technologies are developed. Professionals in every area of bioscience will have data management needs that require publicly available bioinformatics resources. Not all scientists desire a formal bioinformatics education but would benefit from more informal educational sources of learning. Effective bioinformatics education formats will address a broad range of scientific needs, will be aimed at a variety of user skill levels, and will be delivered in a number of different formats to address different learning styles. Informal sources of bioinformatics education that are effective are available, and will be explored in this review.

OpenHelix: bioinformatics education outside of a different box

PubMed Central

Mangan, Mary E.; Perreault-Micale, Cynthia; Lathe, Scott; Sirohi, Neeraj; Lathe, Warren C.

2010-01-01

The amount of biological data is increasing rapidly, and will continue to increase as new rapid technologies are developed. Professionals in every area of bioscience will have data management needs that require publicly available bioinformatics resources. Not all scientists desire a formal bioinformatics education but would benefit from more informal educational sources of learning. Effective bioinformatics education formats will address a broad range of scientific needs, will be aimed at a variety of user skill levels, and will be delivered in a number of different formats to address different learning styles. Informal sources of bioinformatics education that are effective are available, and will be explored in this review. PMID:20798181