A possible railroad oriented scenario in Potomac River Basin planning

Treesearch

George H. Siehl

1980-01-01

A trend may develop in which railroads become lifelines between rural and urban populations. For instance, the railroad along the Potomac River presently serves commuters from Washington's western suburbs. The railroad could be used to reclaim surface mined areas in the upper portion of the Potomac. These same lines can also open western Maryland as a recreation...

Waveguide module comprising a first plate with a waveguide channel and a second plate with a raised portion in which a sealing layer is forced into the waveguide channel by the raised portion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strassner, II, Bernd H.; Liedtke, Richard; McDonald, Jacob Jeremiah

The various technologies presented herein relate to utilizing a sealing layer of malleable material to seal gaps, etc., at a joint between edges of a waveguide channel formed in a first plate and a surface of a clamping plate. A compression pad is included in the surface of the clamping plate and is dimensioned such that the upper surface of the pad is less than the area of the waveguide channel opening on the first plate. The sealing layer is placed between the waveguide plate and the clamping plate, and during assembly of the waveguide module, the compression pad deformsmore » a portion of the sealing layer such that it ingresses into the waveguide channel opening. Deformation of the sealing layer results in the gaps, etc., to be filled, improving the operational integrity of the joint.« less

Umbilical mechanism

NASA Technical Reports Server (NTRS)

Barron, Daniel R. (Inventor); Jasulaitis, Vytas (Inventor); Morrill, Brion F. (Inventor)

1995-01-01

Apparatus is described for automatically mating a pair of connectors and protecting them prior to mating, which minimizes weight and uses relatively simple and reliable mechanisms. Lower and upper connectors (24, 26) are held in lower and upper parts (14, 16) of a housing, with the upper connector mounted on a carrier (32) that is motor driven to move down and mate the connectors. A pair of movable members (36, 38) serve as shields, as coarse alignment aids, and as force transmitters. The movable members are pivotally mounted at the bottom of the upper housing, and as the carrier moves down it pivots the members out of the way. The movable members have socket elements (116) that closely receive pin elements (120) on the lower housing part, to coarsely align the connectors and to react mating and unmating forces between the housings. The carrier has a pair of plate portions (60, 62) with slots (64), and the movable members have cam followers engaged with the slot walls, to move the members with precision. The carrier plate-like portions engage follower members (82) that pivot open lower shield parts (44, 46) covering the lower connector, which is mounted on four stacks of Belleville washers (142).

DIFFUSION PUMP

DOEpatents

Levenson, L.

1963-09-01

A high-vacuum diffusion pump is described, featuring a novel housing geometry for enhancing pumping speed. An upright, cylindrical lower housing portion is surmounted by a concentric, upright, cylindrical upper housing portion of substantially larger diameter; an uppermost nozzle, disposed concentrically within the upper portion, is adapted to eject downwardly a conical sheet of liquid outwardly to impinge upon the uppermost extremity of the interior wall of the lower portion. Preferably this nozzle is mounted upon a pedestal rising coaxially from within the lower portion and projecting up into said upper portion. (AEC)

Dual manifold heat pipe evaporator

DOEpatents

Adkins, Douglas R.; Rawlinson, K. Scott

1994-01-01

An improved evaporator section for a dual manifold heat pipe. Both the upper and lower manifolds can have surfaces exposed to the heat source which evaporate the working fluid. The tubes in the tube bank between the manifolds have openings in their lower extensions into the lower manifold to provide for the transport of evaporated working fluid from the lower manifold into the tubes and from there on into the upper manifold and on to the condenser portion of the heat pipe. A wick structure lining the inner walls of the evaporator tubes extends into both the upper and lower manifolds. At least some of the tubes also have overflow tubes contained within them to carry condensed working fluid from the upper manifold to pass to the lower without spilling down the inside walls of the tubes.

Method for establishing a combustion zone in an in situ oil shale retort having a pocket at the top

DOEpatents

Cha, Chang Y.

1980-01-01

An in situ oil shale retort having a top boundary of unfragmented formation and containing a fragmented permeable mass has a pocket at the top, that is, an open space between a portion of the top of the fragmented mass and the top boundary of unfragmented formation. To establish a combustion zone across the fragmented mass, a combustion zone is established in a portion of the fragmented mass which is proximate to the top boundary. A retort inlet mixture comprising oxygen is introduced to the fragmented mass to propagate the combustion zone across an upper portion of the fragmented mass. Simultaneously, cool fluid is introduced to the pocket to prevent overheating and thermal sloughing of formation from the top boundary into the pocket.

An analysis of the input-output properties of neuroprosthetic hand grasps.

PubMed

Memberg, W D; Crago, P E

2000-01-01

We measured the input-output properties of the hand grasps of 14 individuals with tetraplegia at the C5/C6 level who had received an implanted upper limb neuroprosthesis. The data provide a quantitative description of grasp-opening and grasp-force control with neuroprosthetic hand grasp systems. Static properties were estimated by slowly ramping the command (input) from 0 to 100%. A hand-held sensor monitored the outputs: grasp force and grasp opening. Trials were performed at different wrist positions, with two different-sized objects being held, and with both grasp modes (lateral and palmar grasps). Larger forces were produced when grasping larger objects, and greater opening was achieved with the wrist in flexion. Although active grasp force increased with wrist extension, it was not significant statistically. Lateral grasp produced larger forces than the palmar grasp. The command range can be divided into a portion that controls grasp opening and a portion that controls grasp force. The portion controlling force increased with spacer size, but did not depend significantly on grasp mode or wrist position. The force-command relationships were more linear than the position-command relationships. Grasp opening decreased significantly over a one-year period, while no significant change in grasp force was observed. These quantitative descriptions of neuroprosthetic hand grasps under varying conditions provide useful information about output capabilities that can be used to gauge the effectiveness of different control schemes and to design future control systems.

Dual manifold heat pipe evaporator

DOEpatents

Adkins, D.R.; Rawlinson, K.S.

1994-01-04

An improved evaporator section is described for a dual manifold heat pipe. Both the upper and lower manifolds can have surfaces exposed to the heat source which evaporate the working fluid. The tubes in the tube bank between the manifolds have openings in their lower extensions into the lower manifold to provide for the transport of evaporated working fluid from the lower manifold into the tubes and from there on into the upper manifold and on to the condenser portion of the heat pipe. A wick structure lining the inner walls of the evaporator tubes extends into both the upper and lower manifolds. At least some of the tubes also have overflow tubes contained within them to carry condensed working fluid from the upper manifold to pass to the lower without spilling down the inside walls of the tubes. 1 figure.

Low energy high pressure miniature screw valve

DOEpatents

Fischer, Gary J [Sandia Park, NM; Spletzer, Barry L [Albuquerque, NM

2006-12-12

A low energy high pressure screw valve having a valve body having an upper portion and a lower portion, said lower portion of said valve body defining an inlet flow passage and an outlet flow passage traversing said valve body to a valve seat, said upper portion of said valve body defining a cavity at said valve seat, a diaphragm restricting flow between said upper portion of said valve body and said lower portion, said diaphragm capable of engaging said valve seat to restrict fluid communication between said inlet passage and said outlet passage, a plunger within said cavity supporting said diaphragm, said plunger being capable of engaging said diaphragm with said valve seat at said inlet and outlet fluid passages, said plunger being in point contact with a drive screw having threads engaged with opposing threads within said upper portion of said valve body such engagement allowing motion of said drive screw within said valve body.

Gasket with pushrod retainer

DOEpatents

Knudsen, Julian R.; Welch, Christopher B.

2005-04-26

In an engine having a rocker member adapted to rock about an axis intermediate the rocker member and a pushrod extending from a lower body to an upper body and engaging an end of the rocker member, a gasket for sealing the lower body to the upper body is provided. The gasket includes a sealing portion adapted to substantially seal at least a portion of the upper body to the lower body, and a pushrod support portion extending outwardly from the sealing portion adapted to engage the pushrod. At least a portion of the pushrod support portion engaging the pushrod is constructed from a material that is softer than the material of the pushrod.

Foot pedal operated fluid type exercising device

NASA Technical Reports Server (NTRS)

Crum, G. W.; Sauter, R. J. (Inventor)

1973-01-01

A foot pedal operated exercising device is reported that contains a dynamometer formed of a pair of cylinders each containing a piston. The pistons are linked to each other. The upper portions of the two cylinders are joined together by a common opening to provide a common fluid reservoir and each piston is provided with a one way check valve to maintain an adequate supply of working fluid. Fluid from the driven cylinder is transmitted to the other cylinder through separate constant force spring biased valves each valve takes the predominant portion of the pressure drop thereby providing a constant force hydraulic dynamometer. A device is provided to determine the amount of movement of piston travel.

Liquid level controller

DOEpatents

Mangus, J.D.; Redding, A.H.

1975-07-15

A system for maintaining two distinct sodium levels within the shell of a heat exchanger having a plurality of J-shaped modular tube bundles each enclosed in a separate shell which extends from a common base portion. A lower liquid level is maintained in the base portion and an upper liquid level is maintained in the shell enwrapping the long stem of the J-shaped tube bundles by utilizing standpipes with a notch at the lower end which decreases in open area the distance from the end of the stand pipe increases and a supply of inert gas fed at a constant rate to produce liquid levels, which will remain generally constant as the flow of liquid through the vessel varies. (auth)

Lake Superior, Duluth, MN

NASA Technical Reports Server (NTRS)

1973-01-01

This view shows the west end of Lake Superior and Duluth, MN (47.0N, 91.0W). Portions of Minnesota, Michigan and Ontario, Canada are in the scene. The Duluth metropolitan area is at the west end of the lake. The discoloration plume in the water at Duluth is the result of tailings from the iron ore smelters that process the iron ore from the nearby open pit mines seen near the upper left corner of the photo.

PWR upper/lower internals shield

DOE Office of Scientific and Technical Information (OSTI.GOV)

Homyk, W.A.

1995-03-01

During refueling of a nuclear power plant, the reactor upper internals must be removed from the reactor vessel to permit transfer of the fuel. The upper internals are stored in the flooded reactor cavity. Refueling personnel working in containment at a number of nuclear stations typically receive radiation exposure from a portion of the highly contaminated upper intervals package which extends above the normal water level of the refueling pool. This same issue exists with reactor lower internals withdrawn for inservice inspection activities. One solution to this problem is to provide adequate shielding of the unimmersed portion. The use ofmore » lead sheets or blankets for shielding of the protruding components would be time consuming and require more effort for installation since the shielding mass would need to be transported to a support structure over the refueling pool. A preferable approach is to use the existing shielding mass of the refueling pool water. A method of shielding was devised which would use a vacuum pump to draw refueling pool water into an inverted canister suspended over the upper internals to provide shielding from the normally exposed components. During the Spring 1993 refueling of Indian Point 2 (IP2), a prototype shield device was demonstrated. This shield consists of a cylindrical tank open at the bottom that is suspended over the refueling pool with I-beams. The lower lip of the tank is two feet below normal pool level. After installation, the air width of the natural shielding provided by the existing pool water. This paper describes the design, development, testing and demonstration of the prototype device.« less

Lake Superior, Deluth, MN

NASA Image and Video Library

1973-06-22

SL2-05-454 (22 June 1973) --- This view shows the west end of Lake Superior and Duluth, MN (47.0N, 91.0W). Portions of Minnesota, Michigan and Ontario, Canada are in the scene. The Duluth metropolitan area is at the west end of the lake. The discoloration plume in the water at Duluth is the result of tailings from the iron ore smelters that process the iron ore from the nearby open pit mines seen near the upper left corner of the photo. Photo credit: NASA

Clear-air lidar dark band

NASA Astrophysics Data System (ADS)

Girolamo, Paolo Di; Scoccione, Andrea; Cacciani, Marco; Summa, Donato; Schween, Jan H.

2018-04-01

This paper illustrates measurements carried out by the Raman lidar BASIL in the frame of HOPE, revealing the presence of a clear-air dark band phenomenon (i.e. the appearance of a minimum in lidar backscatter echoes) in the upper portion of the convective boundary layer. The phenomenon is clearly distinguishable in the lidar backscatter echoes at 1064 nm. This phenomenon is attributed to the presence of lignite aerosol particles advected from the surrounding open pit mines in the vicinity of the measuring site.

Tornado type wind turbines

DOEpatents

Hsu, Cheng-Ting

1984-01-01

A tornado type wind turbine has a vertically disposed wind collecting tower with spaced apart inner and outer walls and a central bore. The upper end of the tower is open while the lower end of the structure is in communication with a wind intake chamber. An opening in the wind chamber is positioned over a turbine which is in driving communication with an electrical generator. An opening between the inner and outer walls at the lower end of the tower permits radially flowing air to enter the space between the inner and outer walls while a vertically disposed opening in the wind collecting tower permits tangentially flowing air to enter the central bore. A porous portion of the inner wall permits the radially flowing air to interact with the tangentially flowing air so as to create an intensified vortex flow which exits out of the top opening of the tower so as to create a low pressure core and thus draw air through the opening of the wind intake chamber so as to drive the turbine.

Agitation apparatus. [Patent application

DOEpatents

Beets, A.L.; Lewis, B.E. Jr.

1982-03-12

Agitation apparatus includes a tank with a cylindrical upper portion, a frustoconical intermediate portion, and a cylindrical lower portion, a lift tube extending from the upper portion of the tank to a point near an end cap attached to the lower portion of the tank, the lift tube being concentric with the lower portion of the tank to provide a flow passage there between, and a plurality of air supply conduits extending along the lift tube and spaced apart around its perimeter, these air supply conduits terminating adjacent the lower end of the lift tube. Air discharged from the lower ends of the air supply conduits causes liquid in the tank to flow upwardly through the lift tube and out of apertures in the upper portion thereof. Due to the unique properties of nuclear fuel dissolver solutions and the constraint placed on the amount of air that can be injected therein by conventional apparatus, there has been a need for a more effective means for agitating liquid in nuclear fuel digester tanks.

77 FR 49775 - Boundary Technical Correction for the McKenzie Wild and Scenic River “Lower and Upper Portions...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

... DEPARTMENT OF AGRICULTURE Forest Service Boundary Technical Correction for the McKenzie Wild and... Service, USDA. ACTION: Notice of availability. SUMMARY: In accordance with Section 3(b) of the Wild and... for the boundary of the McKenzie Wild and Scenic River ``Lower Portion'' and ``Upper Portion'' to...

Non-intrusive cooling system

DOEpatents

Morrison, Edward F.; Bergman, John W.

2001-05-22

A readily replaceable heat exchange cooling jacket for applying fluid to a system conduit pipe. The cooling jacket comprises at least two members, separable into upper and lower portions. A chamber is formed between the conduit pipe and cooling jacket once the members are positioned about the pipe. The upper portion includes a fluid spray means positioned above the pipe and the bottom portion includes a fluid removal means. The heat exchange cooling jacket is adaptable with a drain tank, a heat exchanger, a pump and other standard equipment to provide a system for removing heat from a pipe. A method to remove heat from a pipe, includes the steps of enclosing a portion of the pipe with a jacket to form a chamber between an outside surface of the pipe and the cooling jacket; spraying cooling fluid at low pressure from an upper portion of the cooling jacket, allowing the fluid to flow downwardly by gravity along the surface of the pipe toward a bottom portion of the chamber; and removing the fluid at the bottom portion of the chamber.

Device for equalizing molten electrolyte content in a fuel cell stack

DOEpatents

Smith, J.L.

1985-12-23

A device for equalizing the molten electrolyte content throughout the height of a fuel cell stack is disclosed. The device includes a passageway for electrolyte return with electrolyte wettable wicking material in the opposite end portions of the passageway. One end portion is disposed near the upper, negative end of the stack where electrolyte flooding occurs. The second end portion is placed near the lower, positive end of the stack where electrolyte is depleted. Heating means are provided at the upper portion of the passageway to increase electrolyte vapor pressure in the upper wicking material. The vapor is condensed in the lower passageway portion and conducted as molten electrolyte in the lower wick to the positive end face of the stack. An inlet is provided to inject a modifying gas into the passageway and thereby control the rate of electrolyte return.

Device for equalizing molten electrolyte content in a fuel cell stack

DOEpatents

Smith, James L.

1987-01-01

A device for equalizing the molten electrolyte content throughout the height of a fuel cell stack is disclosed. The device includes a passageway for electrolyte return with electrolyte wettable wicking material in the opposite end portions of the passageway. One end portion is disposed near the upper, negative end of the stack where electrolyte flooding occurs. The second end portion is placed near the lower, positive end of the stack where electrolyte is depleted. Heating means are provided at the upper portion of the passageway to increase electrolyte vapor pressure in the upper wicking material. The vapor is condensed in the lower passageway portion and conducted as molten electrolyte in the lower wick to the positive end face of the stack. An inlet is provided to inject a modifying gas into the passageway and thereby control the rate of electrolyte return.

Manual braille writer

DOEpatents

Hawk, L.S.; Turner, J.H.

1992-07-28

A manual-type braille writer is described that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted. 10 figs.

Manual braille writer

DOEpatents

Hawk, Lawrence S.; Turner, Joe H.

1992-01-01

A manual-type braille writer that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted.

Modular assembly for supporting, straining, and directing flow to a core in a nuclear reactor

DOEpatents

Pennell, William E.

1977-01-01

A reactor core support arrangement for supporting, straining, and providing fluid flow to the core and periphery of a nuclear reactor during normal operation. A plurality of removable inlet modular units are contained within permanent liners in the lower supporting plate of the reactor vessel lower internals. During normal operation (1) each inlet modular unit directs main coolant flow to a plurality of core assemblies, the latter being removably supported in receptacles in the upper portion of the modular unit and (2) each inlet modular unit may direct bypass flow to a low pressure annular region of the reactor vessel. Each inlet modular unit may include special fluid seals interposed between mating surfaces of the inlet modular units and the core assemblies and between the inlet modular units and the liners, to minimize leakage and achieve an hydraulic balance. Utilizing the hydraulic balance, the modular units are held in the liners and the assemblies are held in the modular unit receptacles by their own respective weight. Included as part of the permanent liners below the horizontal support plate are generally hexagonal axial debris barriers. The axial debris barriers collectively form a bottom boundary of a secondary high pressure plenum, the upper boundary of which is the bottom surface of the horizontal support plate. Peripheral liners include radial debris barriers which collectively form a barrier against debris entry radially. During normal operation primary coolant inlet openings in the liner, below the axial debris barriers, pass a large amount of coolant into the inlet modular units, and secondary coolant inlet openings in the portion of the liners within the secondary plenum pass a small amount of coolant into the inlet modular units. The secondary coolant inlet openings also provide alternative coolant inlet flow paths in the unlikely event of blockage of the primary inlet openings. The primary inlet openings have characteristics which limit the entry of debris and minimize the potential for debris entering the primary inlets blocking the secondary inlets from inside the modular unit.

Using (137)Cs to quantify the redistribution of soil organic carbon and total N affected by intensive soil erosion in the headwaters of the Yangtze River, China.

PubMed

Guoxiao, Wei; Yibo, Wang; Yan Lin, Wang

2008-12-01

Characteristics of soil organic carbon (SOC) and total nitrogen (total N) are important for determining the overall quality of soils. Studies on spatial and temporal variation in SOC and total N are of great importance because of global environmental concerns. Soil erosion is one of the major processes affecting the redistribution of SOC and total N in the test fields. To characterize the distribution and dynamics of SOC and N in the intensively eroded soil of the headwaters of the Yangtze River, China, we measured profiles of soil organic C, total N stocks, and (137)Cs in a control plot and a treatment plot. The amounts of SOC, (137)Cs of sampling soil profiles increased in the following order, lower>middle>upper portions on the control plot, and the amounts of total N of sampling soil profile increase in the following order: upper>middle>lower on the control plot. Intensive soil erosion resulted in a significant decrease of SOC amounts by 34.9%, 28.3% and 52.6% for 0-30cm soil layer at upper, middle and lower portions and (137)Cs inventory decreased by 68%, 11% and 85% at upper, middle and lower portions, respectively. On the treatment plot total N decreased by 50.2% and 14.6% at the upper and middle portions and increased by 48.9% at the lower portion. Coefficients of variation (CVs) of SOC decreased by 31%, 37% and 30% in the upper, middle and lower slope portions, respectively. Similar to the variational trend of SOC, CVs of (137)Cs decreased by 19.2%, 0.5% and 36.5%; and total N decreased by 45.7%, 65.1% and 19% in the upper, middle and lower slope portions, respectively. The results showed that (137)Cs, SOC and total N moved on the sloping land almost in the same physical mechanism during the soil erosion procedure, indicating that fallout of (137)Cs could be used directly for quantifying dynamic SOC and total N redistribution as the soil was affected by intensive soil erosion.

Conduit purging device and method

NASA Technical Reports Server (NTRS)

Wilks, Michael T. (Inventor)

2011-01-01

A device for purging gas comprises a conduit assembly defining an interior volume. The conduit assembly comprises a first conduit portion having an open first end and an open second end and a second conduit portion having an open first end and a closed second end. The open second end of the first conduit portion is disposed proximate to the open first end of the second conduit portion to define a weld region. The device further comprises a supply element supplying a gas to the interior volume at a substantially constant rate and a vent element venting the gas from the interior volume at a rate that maintains the gas in the interior volume within a pressure range suitable to hold a weld bead in the weld region in equilibrium during formation of a weld to join the first conduit portion and the second conduit portion.

Device for controlling the pouring of molten materials

DOEpatents

Moore, A.F.; Duncan, A.L.

1994-02-15

A device is described for controlling the pouring of a molten material from a crucible or other container. The device includes an annular retainer ring for mounting in the drain opening in the bottom of a conventional crucible, the retainer ring defining a opening there through. The device also includes a plug member having an annular forward end portion for force-fit reception in the opening of the retainer ring to selectively seal the opening and for being selectively forced through the opening. The plug member has a rear end portion for being positioned within the crucible, the rear end portion including stop means for prohibiting the rear end portion from passing through the opening in the retainer ring when the forward end portion is selectively forced through the opening. The plug member defines at least one, and preferably a plurality of flutes, each extending from a point rearward the annular forward end portion of the plug member, and forward the stop means, to a point rearward of the stop means. The flutes permit fluid communication between the interior and exterior of the crucible when the forward end portion of the plug member is forced through the opening in the retaining ring such that the molten material is allowed to flow from the crucible. 5 figures.

Magnetic electrical connectors for biomedical percutaneous implants

NASA Technical Reports Server (NTRS)

Owens, L. J. (Inventor)

1977-01-01

A biomedical percutaneous connector is described which includes a socket having an enlarged disk shaped base portion for being implanted below the patient's skin and cylindrical portion which is integral with the base portion and extends outwardly of the skin. A conical recess in an upper end of the cylindrical portion has a magnet located in the base. Inclined conductive strips are carried on an upper end of the cylindrical portion to which electrical conductors are attached and extend into the patient's body. A complementary shaped plug which also has electrical contacts provided thereon is adapted to fit within the conical recess of the socket. The plug is held in the socket by magnetic force.

Creating and maintaining a gas cap in tar sands formations

DOEpatents

Vinegar, Harold J.; Karanikas, John Michael; Dinkoruk, Deniz Sumnu; Wellington, Scott Lee

2010-03-16

Methods for treating a tar sands formation are disclosed herein. Methods for treating a tar sands formation may include providing heat to at least part of a hydrocarbon layer in the formation from one or more heaters located in the formation. Pressure may be allowed to increase in an upper portion of the formation to provide a gas cap in the upper portion. At least some hydrocarbons are produced from a lower portion of the formation.

21 CFR 14.25 - Portions of advisory committee meetings.

Code of Federal Regulations, 2011 CFR

2011-04-01

... committee meetings. An advisory committee meeting has the following portions: (a) The open public hearing. Every committee meeting includes an open portion, which constitutes a public hearing during which... in accordance with § 14.29. (b) The open committee discussion. A committee discusses any matter...

21 CFR 14.25 - Portions of advisory committee meetings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... committee meetings. An advisory committee meeting has the following portions: (a) The open public hearing. Every committee meeting includes an open portion, which constitutes a public hearing during which... in accordance with § 14.29. (b) The open committee discussion. A committee discusses any matter...

21 CFR 14.25 - Portions of advisory committee meetings.

Code of Federal Regulations, 2014 CFR

2014-04-01

... committee meetings. An advisory committee meeting has the following portions: (a) The open public hearing. Every committee meeting includes an open portion, which constitutes a public hearing during which... in accordance with § 14.29. (b) The open committee discussion. A committee discusses any matter...

21 CFR 14.25 - Portions of advisory committee meetings.

Code of Federal Regulations, 2013 CFR

2013-04-01

... committee meetings. An advisory committee meeting has the following portions: (a) The open public hearing. Every committee meeting includes an open portion, which constitutes a public hearing during which... in accordance with § 14.29. (b) The open committee discussion. A committee discusses any matter...

21 CFR 14.25 - Portions of advisory committee meetings.

Code of Federal Regulations, 2012 CFR

2012-04-01

... committee meetings. An advisory committee meeting has the following portions: (a) The open public hearing. Every committee meeting includes an open portion, which constitutes a public hearing during which... in accordance with § 14.29. (b) The open committee discussion. A committee discusses any matter...

BEDROOM 2. NOTE THE WINDOWS IN THE UPPER PORTION OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

BEDROOM 2. NOTE THE WINDOWS IN THE UPPER PORTION OF THE EXTERIOR WALL. VIEW FACING NORTH - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Three-Bedroom Single-Family Types 8 and 11, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

Identification of failed fuel element

DOEpatents

Fryer, Richard M.; Matlock, Robert G.

1976-06-22

A passive fission product gas trap is provided in the upper portion of each fuel subassembly in a nuclear reactor. The gas trap consists of an inverted funnel of less diameter than the subassembly having a valve at the apex thereof. An actuating rod extends upwardly from the valve through the subassembly to a point where it can be contacted by the fuel handling mechanism for the reactor. Interrogation of the subassembly for the presence of fission products is accomplished by lowering the fuel handling machine onto the subassembly to press down on the actuating rod and open the valve.

Nuclear reactor

DOEpatents

Pennell, William E.; Rowan, William J.

1977-01-01

A nuclear reactor in which the core components, including fuel-rod assemblies, control-rod assemblies, fertile rod-assemblies, and removable shielding assemblies, are supported by a plurality of separate inlet modular units. These units are referred to as inlet module units to distinguish them from the modules of the upper internals of the reactor. The modular units are supported, each removable independently of the others, in liners in the supporting structure for the lower internals of the reactor. The core assemblies are removably supported in integral receptacles or sockets of the modular units. The liners, units, sockets and assmblies have inlet openings for entry of the fluid. The modular units are each removably mounted in the liners with fluid seals interposed between the opening in the liner and inlet module into which the fluid enters and the upper and lower portion of the liner. Each assembly is similarly mounted in a corresponding receptacle with fluid seals interposed between the openings where the fluid enters and the lower portion of the receptacle or fitting closely in these regions. As fluid flows along each core assembly a pressure drop is produced along the fluid so that the fluid which emerges from each core assembly is at a lower pressure than the fluid which enters the core assembly. However because of the seals interposed in the mountings of the units and assemblies the pressures above and below the units and assemblies are balanced and the units are held in the liners and the assemblies are held in the receptacles by their weights as they have a higher specific gravity than the fluid. The low-pressure spaces between each module and its liner and between each core assembly and its module is vented to the low-pressure regions of the vessel to assure that fluid which leaks through the seals does not accumulate and destroy the hydraulic balance.

Terminator assembly for a floating structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiu, H.; Hall, J.E.

1987-10-20

A terminator assembly is described for use in mooring a floating surface to the floor of a body of water. The floating structure has has an upper support and a lower support, comprising: a hawsepipe extending downwardly from adjacent the upper support and supported by the lower support, a tension member extending downwardly from adjacent the upper support through the hawsepipe and the lower support. The tension member has a lower end adapted for connection to the floor of the body of water. Locking means connected to an upper portion of the tension member for maintaining the tension member inmore » tension by acting upon an upper portion of the hawsepipe without transferring primary tension load forces to the upper support.« less

Methods of Testing Thermal Insulation and Associated Test Apparatus

NASA Technical Reports Server (NTRS)

Fesmire, James E. (Inventor); Augustynowicz, Stanislaw D. (Inventor)

2004-01-01

The system and method for testing thermal insulation uses a cryostatic insulation tester having a vacuum chamber and a cold mass including a test chamber and upper and lower guard chambers adjacent thereto. The thermal insulation is positioned within the vacuum chamber and adjacent the cold mass. Cryogenic liquid is supplied to the test chamber, upper guard and lower guard to create a first gas layer in an upper portion of the lower guard chamber and a second gas layer in an upper portion of the test chamber. Temperature are sensed within the vacuum chamber to test the thermal insulation.

Lockout device for high voltage circuit breaker

DOEpatents

Kozlowski, Lawrence J.; Shirey, Lawrence A.

1993-01-01

An improved lockout assembly is provided for a circuit breaker to lock the switch handle into a selected switch position. The lockout assembly includes two main elements, each having a respective foot for engaging a portion of the upper housing wall of the circuit breaker. The first foot is inserted into a groove in the upper housing wall, and the second foot is inserted into an adjacent aperture (e.g., a slot) in the upper housing wall. The first foot is slid under and into engagement with a first portion, and the second foot is slid under and into engagement with a second portion of the upper housing wall. At the same time the repsective two feet are placed in engagement with the respective portions of the upper housing wall, two holes, one on each of the respective two main elements of the assembly, are placed in registration; and a locking device, such as a special scissors equipped with a padlock, is installed through the registered holes to secure the lockout assembly on the circuit breaker. When the lockout assembly of the invention is secured on the circuit breaker, the switch handle of the circuit breaker is locked into the selected switch position and prevented from being switched to another switch position.

Lockout device for high voltage circuit breaker

DOEpatents

Kozlowski, L.J.; Shirey, L.A.

1993-01-26

An improved lockout assembly is provided for a circuit breaker to lock the switch handle into a selected switch position. The lockout assembly includes two main elements, each having a respective foot for engaging a portion of the upper housing wall of the circuit breaker. The first foot is inserted into a groove in the upper housing wall, and the second foot is inserted into an adjacent aperture (e.g., a slot) in the upper housing wall. The first foot is slid under and into engagement with a first portion, and the second foot is slid under and into engagement with a second portion of the upper housing wall. At the same time the respective two feet are placed in engagement with the respective portions of the upper housing wall, two holes, one on each of the respective two main elements of the assembly, are placed in registration; and a locking device, such as a special scissors equipped with a padlock, is installed through the registered holes to secure the lockout assembly on the circuit breaker. When the lockout assembly of the invention is secured on the circuit breaker, the switch handle of the circuit breaker is locked into the selected switch position and prevented from being switched to another switch position.

78 FR 56650 - Boundary Description and Final Map for Sandy Wild and Scenic River, Upper Portion, Mount Hood...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-13

... DEPARTMENT OF AGRICULTURE Forest Service Boundary Description and Final Map for Sandy Wild and...: Notice of availability. SUMMARY: In accordance with section 3(b) of the Wild and Scenic Rivers Act, the... Sandy Wild and Scenic River, Upper Portion, to Congress. DATES: The boundaries and classification of the...

MASTER BEDROOM SHOWING THE WINDOWS IN THE UPPER PORTION OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MASTER BEDROOM SHOWING THE WINDOWS IN THE UPPER PORTION OF THE EXTERIOR WALL AND THE SLIDING CLOSET DOORS. VIEW FACING WEST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, U-Shaped Two-Bedroom Single-Family Type 6, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

Endovascular Embolization of Bronchial Artery Originating from the Upper Portion of Aortic Arch in Patients with Massive Hemoptysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Sen, E-mail: jasfly77@vip.163.com; Sun, Xi-Wen, E-mail: xwsun@citiz.net; Yu, Dong, E-mail: yudong_mail@126.com

2013-05-15

PurposeOur experience with endovascular embolization (EVE) of the bronchial artery (BA) originating from the upper portion of the aortic arch (AA) in six patients is described.MethodsAltogether, 818 patients with hemoptysis underwent multidetector row computed tomography angiography (MDCTA) before EVE or AA angiography during EVE. Aberrant BAs originating from the upper portion of the AA were the source of massive hemoptysis in six patients (0.73 %). MDCT angiograms and/or Digital subtraction angiograms were retrospectively reviewed. Selective catheterization and embolization were performed.ResultsThe ostia of the BAs were located on the superior surface of the AA between the brachiocephalic trunk and left common carotidmore » artery in three patients, the junction of the aorta and medial surface of the left subclavian artery in two, and the posterior wall of the upper portion of the AA in one. The six BAs comprised two common trunks, three single right sides, and one single left side. The targeted vessels were successfully catheterized and embolized by a coaxial microcatheter system using polyvinyl alcohol particles. Other pathologic BAs and nonbronchial systemic arteries also were embolized. Bleeding was immediately controlled in all patients with no recurrence of hemoptysis. No procedure-related complications occurred.ConclusionsApplication of EVE of anomalous origin of BAs in patients with hemoptysis is important, as demonstrated in the six reported patients. MDCTA before EVE or AA angiography during EVE is critical to avoid missing a rare aberrant BA originating from the upper portion of the AA.« less

LIVING ROOM. NOTE THE WINDOWS IN THE UPPER PORTION OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LIVING ROOM. NOTE THE WINDOWS IN THE UPPER PORTION OF THE EXTERIOR WALL (LEFT) AND SLIDING DOORS TO THE DINING ROOM. VIEW FACING SOUTHWEST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Four-Bedroom, Single-Family Type 10, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, Terry D.; Bingham, Dennis N.; Benefiel, Bradley C.

Reactors for carrying out a chemical reaction, as well as related components, systems and methods are provided. In accordance with one embodiment, a reactor is provided that includes a furnace and a crucible positioned for heating by the furnace. A downtube is disposed at least partially within the interior crucible along an axis. At least one structure is coupled with the downtube and extends substantially across the cross-sectional area of the interior volume taken in a direction substantially perpendicular to the axis. A plurality of holes is formed in the structure enabling fluid flow therethrough. The structure coupled with themore » downtube may include a lower body portion and an upper body portion coupled with the lower body portion, wherein the plurality of holes is formed in the lower body portion adjacent to, and radially outward from, a periphery of the upper body portion.« less

6 CFR 1003.3 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 6 Domestic Security 1 2014-01-01 2014-01-01 false Open meetings. 1003.3 Section 1003.3 Domestic... § 1003.3 Open meetings. (a) Except as otherwise provided in this part, every portion of a Board meeting shall be open to public observation. (b) Board meetings, or portions thereof, shall be open to public...

16 CFR Figure 4 to Part 1513 - Neck Portion of “B” Section of Probe Enters Completely Into Opening

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Neck Portion of âBâ Section of Probe Enters Completely Into Opening 4 Figure 4 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... 1513—Neck Portion of “B” Section of Probe Enters Completely Into Opening ER22DE99.010 ...

16 CFR Figure 4 to Part 1513 - Neck Portion of “B” Section of Probe Enters Completely Into Opening

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Neck Portion of âBâ Section of Probe Enters Completely Into Opening 4 Figure 4 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... 1513—Neck Portion of “B” Section of Probe Enters Completely Into Opening ER22DE99.010 ...

16 CFR Figure 4 to Part 1513 - Neck Portion of “B” Section of Probe Enters Completely Into Opening

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Neck Portion of âBâ Section of Probe Enters Completely Into Opening 4 Figure 4 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... 1513—Neck Portion of “B” Section of Probe Enters Completely Into Opening ER22DE99.010 ...

16 CFR Figure 4 to Part 1513 - Neck Portion of “B” Section of Probe Enters Completely Into Opening

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Neck Portion of âBâ Section of Probe Enters Completely Into Opening 4 Figure 4 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... 1513—Neck Portion of “B” Section of Probe Enters Completely Into Opening ER22DE99.010 ...

16 CFR Figure 4 to Part 1513 - Neck Portion of “B” Section of Probe Enters Completely Into Opening

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Neck Portion of âBâ Section of Probe Enters Completely Into Opening 4 Figure 4 to Part 1513 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... 1513—Neck Portion of “B” Section of Probe Enters Completely Into Opening ER22DE99.010 ...

Geologic framework, hydrostratigraphy, and ichnology of the Blanco, Payton, and Rough Hollow 7.5-minute quadrangles, Blanco, Comal, Hays, and Kendall Counties, Texas

USGS Publications Warehouse

Clark, Allan K.; Golab, James A.; Morris, Robert E.

2016-09-13

This report presents the geologic framework, hydro­stratigraphy, and ichnology of the Trinity and Edwards Groups in the Blanco, Payton, and Rough Hollow 7.5-minute quad­rangles in Blanco, Comal, Hays, and Kendall Counties, Texas. Rocks exposed in the study area are of the Lower Cretaceous Trinity Group and lower part of the Fort Terrett Formation of the Lower Cretaceous Edwards Group. The mapped units in the study area are the Hammett Shale, Cow Creek Limestone, Hensell Sand, and Glen Rose Limestone of the Trinity Group and the lower portion of the Fort Terrett Formation of the Edwards Group. The Glen Rose Limestone is composed of the Lower and Upper Members. These Trinity Group rocks con­tain the upper and middle Trinity aquifers. The only remaining outcrops of the Edwards Group are the basal nodular member of the Fort Terrett Formation, which caps several hills in the northern portion of the study area. These rocks were deposited in an open marine to supratidal flats environment. The faulting and fracturing in the study area are part of the Balcones fault zone, an extensional system of faults that generally trends southwest to northeast in south-central Texas.The hydrostratigraphic units of the Edwards and Trinity aquifers were mapped and described using a classification system based on fabric-selective or not-fabric-selective poros­ity types. The only hydrostratigraphic unit of the Edwards aquifer present in the study area is hydrostratigraphic unit VIII. The mapped hydrostratigraphic units of the upper Trinity aquifer are (from top to bottom) the Camp Bullis, upper evaporite, fossiliferous, and lower evaporite which are interval equivalent to the Upper Member of the Glen Rose Limestone. The middle Trinity aquifer encompasses (from top to bottom) the Lower Member of the Glen Rose Limestone, the Hensell Sand Member, and the Cow Creek Limestone Member of the Pearsall Formation. The Lower Member of the Glen Rose Limestone is subdivided into six informal hydro­stratigraphic units (from top to bottom) the Bulverde, Little Blanco, Twin Sisters, Doeppenschmidt, Rust, and Honey Creek hydrostratigraphic units.This study used the ichnofabric index scale to interpret the amount of bioturbation in the field. Most of the geologic units in the study area are assigned to the Cruziana and Thalassinoides ichnofacies consistent with interpretations of a tidal-dominated open marine environment (sublittoral zone). Ichnofossil assemblages are dominated by Thalassinoides networks, but also contain Cruziana, Ophiomorpha, Paleo­phycus, Planolites, and Serpulid traces.

Clear-air lidar dark band

NASA Astrophysics Data System (ADS)

Di Girolamo, Paolo; Scoccione, Andrea; Cacciani, Marco; Summa, Donato; De Rosa, Benedetto; Schween, Jan H.

2018-04-01

This paper illustrates measurements carried out by the Raman lidar BASIL in the frame of the HD(CP)2 Observational Prototype Experiment (HOPE), revealing the presence of a clear-air dark band phenomenon (i.e. a minimum in lidar backscatter echoes) in the upper portion of the convective boundary layer. The phenomenon is clearly distinguishable in the lidar backscatter echoes at 532 and 1064 nm, as well as in the particle depolarisation data. This phenomenon is attributed to the presence of lignite aerosol particles advected from the surrounding open pit mines in the vicinity of the measuring site. The paper provides evidence of the phenomenon and illustrates possible interpretations for its occurrence.

Interior view of the external airlock of the Orbiter Discovery. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior view of the external airlock of the Orbiter Discovery. In the lower portion of the image is the Aft Hatch and in the upper portion the image is the Upper Hatch. This photograph was taken in the Orbiter Processing Facility at the Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Distribution of palaeosols and deposits in the temporal evolution of a semiarid fluvial distributary system (Bauru Group, Upper Cretaceous, SE Brazil)

NASA Astrophysics Data System (ADS)

Basilici, Giorgio; Bo, Patrick Führ Dal'; de Oliveira, Emerson Ferreira

2016-07-01

The stratigraphic and sedimentological knowledge of the Bauru Group (Upper Cretaceous, SE Brazil) is still generally insufficient and controversial. A sedimentological and palaeopedological study allowed to interpret the south-eastern portion of the Bauru Group according to the model of a fluvial distributary system. This work has two objectives: (1) to include palaeosols in the interpretation of a fluvial distributary system and (2) to give detailed information on the sedimentological and stratigraphic features of the SE portion of the Bauru Group in order to support biostratigraphical, taphonomic and palaeoecological studies. In the south-eastern portion of the Bauru Group, three genetic stratigraphic units were described and interpreted, here informally called lower, intermediate and upper units. The lower unit is constituted of muddy sandstone salt flat deposits and sandstone sheet deltas deposits and is interpreted as a basinal part of a fluvial distributary system. The intermediate unit is formed of very fine to fine-grained sandstone-filled ribbon channel and sandy sheet-shaped beds, suggesting a distal or medial portion of a fluvial distributary system. The upper unit does not match with the present models of the fluvial distributary system because mostly constituted of moderately developed, well-drained, medium- to fine-grained sandstone palaeosols, which testify pauses of sedimentation to the order of 104 years. Preserved features of sedimentary structures suggest that the parent material was formed by occasional catastrophic unconfined flows. This unit may represent the most distal portion of a fluvial distributary system generated by retrogradation of the alluvial system due to aridification of the climate. The upper unit may be interpreted also as proximal portion of fluvial distributary system if considering the coarser-grained and the well-drained palaeosols. However, the absence of channel deposits makes this interpretation unconvincing.

Particle injector for fluid systems

DOEpatents

Ruch, Jeffrey F.

1997-01-01

A particle injector device provides injection of particles into a liquid eam. The device includes a funnel portion comprising a conical member having side walls tapering from a top opening (which receives the particles) down to a relatively smaller exit opening. A funnel inlet receives a portion of the liquid stream and the latter is directed onto the side walls of the conical member so as to create a cushion of liquid against which the particles impact. A main section of the device includes an inlet port in communication with the exit opening of the funnel portion. A main liquid inlet receives the main portion of the liquid stream at high pressure and low velocity and a throat region located downstream of the main liquid inlet accelerates liquid received by this inlet from the low velocity to a higher velocity so as to create a low pressure area at the exit opening of the funnel portion. An outlet opening of the main section enables the particles and liquid stream to exit from the injector device.

Noise Suppression Apparatus and Methods of Manufacturing the Same

NASA Technical Reports Server (NTRS)

Weir, Don (Inventor)

2017-01-01

A noise suppression apparatus includes a body portion including a plurality of nested channels, each channel of the plurality of nested channels including a first end opening and a second end opening, and a surface portion including each first end opening and each second end opening of each channel.

50 CFR 560.3 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 11 2014-10-01 2014-10-01 false Open meetings. 560.3 Section 560.3....3 Open meetings. (a) Except as otherwise provided in this part, every portion of every meeting of the Commission shall be open to public observation. (b) Meetings of the Commission, or portions...

50 CFR 560.3 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 11 2013-10-01 2013-10-01 false Open meetings. 560.3 Section 560.3....3 Open meetings. (a) Except as otherwise provided in this part, every portion of every meeting of the Commission shall be open to public observation. (b) Meetings of the Commission, or portions...

50 CFR 560.3 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Open meetings. 560.3 Section 560.3....3 Open meetings. (a) Except as otherwise provided in this part, every portion of every meeting of the Commission shall be open to public observation. (b) Meetings of the Commission, or portions...

50 CFR 560.3 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Open meetings. 560.3 Section 560.3....3 Open meetings. (a) Except as otherwise provided in this part, every portion of every meeting of the Commission shall be open to public observation. (b) Meetings of the Commission, or portions...

50 CFR 560.3 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 11 2012-10-01 2012-10-01 false Open meetings. 560.3 Section 560.3....3 Open meetings. (a) Except as otherwise provided in this part, every portion of every meeting of the Commission shall be open to public observation. (b) Meetings of the Commission, or portions...

Valve assembly for internal combustion engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wakeman, R.J.; Shea, S.F.

1989-09-05

This patent describes an improvement in a valve assembly for an internal combustion engine of the type including a valve having a valve stem, a valve guideway for mounting this valve for reciprocal strokes between opened and seated position, and spring means for biasing the valve into the seated position. The improvement comprising a valve spool of greater cross-sectional diameter as compared to the valve stem, and a valve spool guideway within which the valve spool is movable during the strokes of the valve, an upper surface of the valve spool and a portion of the spool guideway collectively establishingmore » a damper chamber which varies in volume during the valve strokes. a feed passage for introducing oil into the damper chamber, and a bleed passage for discharging oil from the damper chamber. The bleed passages each laterally opening into the valve spool guideway.« less

Ocean wave electric generators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, H.R.

This patent describes an apparatus for generating electricity from ocean waves. It consists of: 1.) a hollow buoyant duck positioned in the path of waves including a core about the center axis of which the duck rotates, a lower chamber portion having liquid therein and an upper chamber portion having air therein. The air is alternately compressed and expanded by the liquid in the chamber during the rotational motion of the duck caused by waves. A turbine mounted in the upper portion of the duck is driven by the compressed and expanded air. A generator is coupled to the turbinemore » and operated to produce electrical energy and an air bulb; 2.) a spine having a transverse axial shaft anchoring the spine to the ocean floor. The upper portion of the spine engages the duck to maintain the duck in position. The spine has a curved configuration to concentrate and direct wave energy. The spine configuration acts as a scoop to increase the height of wave peaks and as a foil to increase the depth of wave troughs.« less

Fuel rod assembly to manifold attachment

DOEpatents

Donck, Harry A.; Veca, Anthony R.; Snyder, Jr., Harold J.

1980-01-01

A fuel element is formed with a plurality of fuel rod assemblies detachably connected to an overhead support with each of the fuel rod assemblies having a gas tight seal with the support to allow internal fission gaseous products to flow without leakage from the fuel rod assemblies into a vent manifold passageway system on the support. The upper ends of the fuel rod assemblies are located at vertically extending openings in the support and upper threaded members are threaded to the fuel rod assemblies to connect the latter to the support. The preferred threaded members are cap nuts having a dome wall encircling an upper threaded end on the fuel rod assembly and having an upper sealing surface for sealing contact with the support. Another and lower seal is achieved by abutting a sealing surface on each fuel rod assembly with the support. A deformable portion on the cap nut locks the latter against inadvertent turning off the fuel rod assembly. Orienting means on the fuel rod and support primarily locates the fuel rods azimuthally for reception of a deforming tool for the cap nut. A cross port in the fuel rod end plug discharges into a sealed annulus within the support, which serves as a circumferential chamber, connecting the manifold gas passageways in the support.

29 CFR 1612.4 - Exemptions to open meeting policy.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 4 2013-07-01 2013-07-01 false Exemptions to open meeting policy. 1612.4 Section 1612.4... THE SUNSHINE ACT REGULATIONS § 1612.4 Exemptions to open meeting policy. Except in a case where the... any meeting or portion of a meeting or portion of a meeting where the agency determines that an open...

29 CFR 1612.4 - Exemptions to open meeting policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 4 2012-07-01 2012-07-01 false Exemptions to open meeting policy. 1612.4 Section 1612.4... THE SUNSHINE ACT REGULATIONS § 1612.4 Exemptions to open meeting policy. Except in a case where the... any meeting or portion of a meeting or portion of a meeting where the agency determines that an open...

29 CFR 1612.4 - Exemptions to open meeting policy.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 4 2011-07-01 2011-07-01 false Exemptions to open meeting policy. 1612.4 Section 1612.4... THE SUNSHINE ACT REGULATIONS § 1612.4 Exemptions to open meeting policy. Except in a case where the... any meeting or portion of a meeting or portion of a meeting where the agency determines that an open...

29 CFR 1612.4 - Exemptions to open meeting policy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Exemptions to open meeting policy. 1612.4 Section 1612.4... THE SUNSHINE ACT REGULATIONS § 1612.4 Exemptions to open meeting policy. Except in a case where the... any meeting or portion of a meeting or portion of a meeting where the agency determines that an open...

29 CFR 1612.4 - Exemptions to open meeting policy.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 4 2014-07-01 2014-07-01 false Exemptions to open meeting policy. 1612.4 Section 1612.4... THE SUNSHINE ACT REGULATIONS § 1612.4 Exemptions to open meeting policy. Except in a case where the... any meeting or portion of a meeting or portion of a meeting where the agency determines that an open...

Reusable pipe flange covers

DOEpatents

Holden, James Elliott; Perez, Julieta

2001-01-01

A molded, flexible pipe flange cover for temporarily covering a pipe flange and a pipe opening includes a substantially round center portion having a peripheral skirt portion depending from the center portion, the center portion adapted to engage a front side of the pipe flange and to seal the pipe opening. The peripheral skirt portion is formed to include a plurality of circumferentially spaced tabs, wherein free ends of the flexible tabs are formed with respective through passages adapted to receive a drawstring for pulling the tabs together on a back side of the pipe flange.

SPACELAB (SL)-1 - INSIGNIAS

NASA Image and Video Library

1981-10-01

S82-31408 (May 1983) --- The Spacelab 2 emblem is a symbolic representation of the scientific objectives of the mission. The emblem is in the shape of a triangular shield with convexly curved edges. Across the top of a black out border are the words ?SPACELAB 2?. Within the black border is a sky blue border carryhing the words: ?ASTRONOMY?, ON TOP? ?PHYSICS?, on the left; and ?BIOLOGY?, on the right. Within the blue border is a schematic view of the sun, the earth, and the orbiter with Spacelab 2. The sun appears in the upper right background as a white disc surrounded by six concentric rings ranging grom bright yellow near the disc through yellow-red to a dark red out ring. A sector of the earth with blue ocean and a black portion of North America is in the upper left corner. The black and white Orbiter is seen from directly overhead in the foreground, the right side illuminated by the sun, the left side in shadow. Although the payload bay doors are not open, the Spacelab 2 payload is seen as if the doors were open. In black on white are seen the three pallets, and the separately mounted cosmic ray experiment at the aft end of the bay.

Geodynamic evolution of the Taiwan-Luzon-Mindoro belt since the late eocene

NASA Astrophysics Data System (ADS)

Stephan, Jean François; Blanchet, René; Rangin, Claude; Pelletier, Bernard; Letouzey, Jean; Muller, Carla

1986-05-01

The structural framework of the Taiwan-Luzon-Mindoro belt (or festoon) is described, following three major transects: the Luzon transect with active subduction and active island arc; the Taiwan transect with active collision; the Mindoro transect with active subduction and inactive collision. Based on this geological study and on available geophysical data, a model for the geodynamic evolution of this portion of the Philippine Sea and Eurasia Plates boundary is proposed in a succession of reconstructions between the Late Eocene and the Present. The major geodynamic events are: (1) beginning of the opening of the South China Sea (S.C.S.) in Lower Oligocene times, contemporaneous with obduction of the Zambales and Angat ophiolites on Luzon. (2) subduction of a Mesozoic (?) oceanic basin along the proto-Manila trench from the Upper Oligocene to the Lower Miocene. (3) obduction of the South China Sea oceanic crust onto the Chinese and Reed Bank—Calamian passive margins in Middle Miocene time (14-15 Ma) related to a major kinematic reorganization (end of opening of the S.C.S.). (4) beginning of collision between the Luzon microblock and the two margins of the S.C.S. in the Upper Miocene (~ 7 Ma); collision is still active in Taiwan whereas it stopped in Mindoro during the Pliocene.

First Record of Euphoria lurida Fabricius (Coleoptera: Scarabaeidae) Injurious to Safflower (Carthamus tinctorius L.) (Asterales: Asteraceae) in Brazil.

PubMed

Androcioli, H G; Hoshino, A T; Pastório, M A; Cardoso, P C; de Araújo, P M; Fernandes, T A P; Menezes, A O

2017-02-01

We present the first report on Euphoria lurida (Fabricius) (Coleoptera: Scarabaeidae) infestation on safflower (Carthamus tinctorius L.), a crop of industrial and medicinal importance. Between September and October 2013-2015 in Paraná State, we observed E. lurida adults feeding on safflower plants from the inception of flower head formation onwards, over an area of approximately 400 m 2 . Losses in the productivity of infested plants were estimated between 15 and 50%. The damage was characterized by perforations in the upper portion and at the base of the developing flower heads or open flowers, resulting in withering and abortion of the reproductive structures.

Long life reference electrode

DOEpatents

Yonco, R.M.; Nagy, Z.

1987-07-30

An external, reference electrode is provided for long term use with a high temperature, high pressure system. The electrode is arranged in a vertical, electrically insulative tube with an upper portion serving as an electrolyte reservoir and a lower portion in electrolytic communication with the system to be monitored. The lower end portion includes a flow restriction such as a porous plug to limit the electrolyte release into the system. A piston equalized to the system pressure is fitted into the upper portion of the tube to impart a small incremental pressure to the electrolyte. The piston is selected of suitable size and weight to cause only a slight flow of electrolyte through the porous plug into the high pressure system. This prevents contamination of the electrolyte but is of such small flow rate that operating intervals of a month or more can be achieved. 2 figs.

Long life reference electrode

DOEpatents

Yonco, R.M.; Nagy, Z.

1989-04-04

An external, reference electrode is provided for long term use with a high temperature, high pressure system. The electrode is arranged in a vertical, electrically insulative tube with an upper portion serving as an electrolyte reservoir and a lower portion in electrolytic communication with the system to be monitored. The lower end portion includes a flow restriction such as a porous plug to limit the electrolyte release into the system. A piston equalized to the system pressure is fitted into the upper portion of the tube to impart a small incremental pressure to the electrolyte. The piston is selected of suitable size and weight to cause only a slight flow of electrolyte through the porous plug into the high pressure system. This prevents contamination of the electrolyte but is of such small flow rate that operating intervals of a month or more can be achieved. 2 figs.

Long life reference electrode

DOEpatents

Yonco, Robert M.; Nagy, Zoltan

1989-01-01

An external, reference electrode is provided for long term use with a high temperature, high pressure system. The electrode is arranged in a vertical, electrically insulative tube with an upper portion serving as an electrolyte reservior and a lower portion in electrolytic communication with the system to be monitored. The lower end portion includes a flow restriction such as a porous plug to limit the electrolyte release into the system. A piston equalized to the system pressure is fitted into the upper portion of the tube to impart a small incremental pressure to the electrolyte. The piston is selected of suitable size and weight to cause only a slight flow of electrolyte through the porous plug into the high pressure system. This prevents contamination of the electrolyte but is of such small flow rate that operating intervals of a month or more can be achieved.

21 CFR 14.60 - Minutes and reports of advisory committee meetings.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., except that less detailed minutes may be prepared for open portions of meetings which under § 14.61, must... their public disclosure: The open portions specified in § 14.25 (a) and (b), any closed portion during... request, or to data or information described in § 14.75(b). Any inadvertent references that occur are to...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chilese, Francis C.; Torczynski, John R.; Garcia, Rudy

An apparatus for use with extreme ultraviolet (EUV) light comprising A) a duct having a first end opening, a second end opening and an intermediate opening intermediate the first end opening the second end opening, B) an optical component disposed to receive EUV light from the second end opening or to send light through the second end opening, and C) a source of low pressure gas at a first pressure to flow through the duct, the gas having a high transmission of EUV light, fluidly coupled to the intermediate opening. In addition to or rather than gas flow the apparatusmore » may have A) a low pressure gas with a heat control unit thermally coupled to at least one of the duct and the optical component and/or B) a voltage device to generate voltage between a first portion and a second portion of the duet with a grounded insulative portion therebetween.« less

Problem in tracheostomy patient care: recognizing the patient with a displaced tracheostomy tube.

PubMed

Seay, S J; Gay, S L

1997-01-01

There are times when a tracheostomy tube slips out of the trachea. A displaced tracheostomy tube can occur in any patient but is frequently seen in the patient with a full neck. In the overweight patient or patient with a full neck, the tracheostomy tube must pass through a greater amount of soft tissue. Because of this, a smaller portion of the tube is actually within the lumen of the trachea. When the patient coughs excessively or moves the head, the tube can easily slip out of the trachea and into the interstitial tissues of the neck. If the patient has complete obstruction of the upper airway, a displaced tracheostomy tube will result in immediate respiratory distress and can lead to respiratory arrest. If the patient has an intact or at least a partially open upper airway, the displaced tube may not cause an immediate problem. Therefore, displacement of the tracheostomy tube may not be obvious in the patient with a partial airway.

Nuclear reactor fuel assembly duct-tube-to-inlet-nozzle attachment system

DOEpatents

Christiansen, David W.; Smith, Bob G.

1982-01-01

A reusable system for removably attaching the lower end 21 of a nuclear reactor fuel assembly duct tube to an upper end 11 of a nuclear reactor fuel assembly inlet nozzle. The duct tube's lower end 21 has sides terminating in locking tabs 22 which end in inwardly-extending flanges 23. The flanges 23 engage recesses 13 in the top section 12 of the inlet nozzle's upper end 11. A retaining collar 30 slides over the inlet nozzle's upper end 11 to restrain the flanges 23 in the recesses 13. A locking nut 40 has an inside threaded portion 41 which engages an outside threaded portion 15 of the inlet nozzle's upper end 11 to secure the retaining collar 30 against protrusions 24 on the duct tube's sides.

Explosive actuated valve

DOEpatents

Byrne, Kenneth G.

1983-01-01

1. A device of the character described comprising the combination of a housing having an elongate bore and including a shoulder extending inwardly into said bore, a single elongate movable plunger disposed in said bore including an outwardly extending flange adjacent one end thereof overlying said shoulder, normally open conduit means having an inlet and an outlet perpendicularly piercing said housing intermediate said shoulder and said flange and including an intermediate portion intersecting and normally openly communicating with said bore at said shoulder, normally closed conduit means piercing said housing and intersecting said bore at a location spaced from said normally open conduit means, said elongate plunger including a shearing edge adjacent the other end thereof normally disposed intermediate both of said conduit means and overlying a portion of said normally closed conduit means, a deformable member carried by said plunger intermediate said flange and said shoulder and normally spaced from and overlying the intermediate portion of said normally open conduit means, and means on the housing communicating with the bore to retain an explosive actuator for moving said plunger to force the deformable member against the shoulder and extrude a portion of the deformable member out of said bore into portions of the normally open conduit means for plugging the same and to effect the opening of said normally closed conduit means by the plunger shearing edge substantially concomitantly with the plugging of the normally open conduit means.

Optical add/drop filter for wavelength division multiplexed systems

DOEpatents

Deri, Robert J.; Strand, Oliver T.; Garrett, Henry E.

2002-01-01

An optical add/drop filter for wavelength division multiplexed systems and construction methods are disclosed. The add/drop filter includes a first ferrule having a first pre-formed opening for receiving a first optical fiber; an interference filter oriented to pass a first set of wavelengths along the first optical fiber and reflect a second set of wavelengths; and, a second ferrule having a second pre-formed opening for receiving the second optical fiber, and the reflected second set of wavelengths. A method for constructing the optical add/drop filter consists of the steps of forming a first set of openings in a first ferrule; inserting a first set of optical fibers into the first set of openings; forming a first set of guide pin openings in the first ferrule; dividing the first ferrule into a first ferrule portion and a second ferrule portion; forming an interference filter on the first ferrule portion; inserting guide pins through the first set of guide pin openings in the first ferrule portion and second ferrule portion to passively align the first set of optical fibers; removing material such that light reflected from the interference filter from the first set of optical fibers is accessible; forming a second set of openings in a second ferrule; inserting a second set of optical fibers into the second set of openings; and positioning the second ferrule with respect to the first ferrule such that the second set of optical fibers receive the light reflected from the interference filter.

49 CFR 172.558 - CORROSIVE placard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the CORROSIVE placard must be black in the lower portion with a white triangle in the upper portion... horizontal center line. The text and class number must be white. The symbol and inner border must be black...

Belt conveyor apparatus

DOEpatents

Oakley, David J.; Bogart, Rex L.

1987-01-01

A belt conveyor apparatus according to this invention defines a conveyance path including a first pulley and at least a second pulley. An endless belt member is adapted for continuous travel about the pulleys and comprises a lower portion which engages the pulleys and an integral upper portion adapted to receive objects therein at a first location on said conveyance path and transport the objects to a second location for discharge. The upper belt portion includes an opposed pair of longitudinally disposed crest-like members, biased towards each other in a substantially abutting relationship. The crest-like members define therebetween a continuous, normally biased closed, channel along the upper belt portion. Means are disposed at the first and second locations and operatively associated with the belt member for urging the normally biased together crest-like members apart in order to provide access to the continuous channel whereby objects can be received into, or discharged from the channel. Motors are in communication with the conveyance path for effecting the travel of the endless belt member about the conveyance path. The conveyance path can be configured to include travel through two or more elevations and one or more directional changes in order to convey objects above, below and/or around existing structures.

3. AERIAL VIEW, LOOKING SOUTH, OF BUILDING 371 BASEMENT UNDER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. AERIAL VIEW, LOOKING SOUTH, OF BUILDING 371 BASEMENT UNDER CONSTRUCTION. THE BASEMENT HOUSES HEATING, VENTILATION, AND AIR CONDITIONING EQUIPMENT AND MECHANICAL UTILITIES, THE UPPER PART OF THE PLUTONIUM STORAGE VAULT AND MAINTENANCE BAY, AND SMALL PLUTONIUM PROCESSING AREAS. THE BASEMENT LEVEL IS DIVIDED INTO NEARLY EQUAL NORTH AND SOUTH PARTS BY THE UPPER PORTION OF THE PLUTONIUM STORAGE VAULT. (10/7/74) - Rocky Flats Plant, Plutonium Recovery Facility, Northwest portion of Rocky Flats Plant, Golden, Jefferson County, CO

16 CFR 1013.4 - Public attendance at Commission meetings.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Attendance by the public. Every portion of every Commission meeting shall be open to public observation... contained in paragraph (b) of this section, a Commission meeting or portions thereof shall be open to public... Commission meeting in open session. The number of public observers shall be limited only by availability of...

PERSPECTIVE NORTHEAST. NOTE TYPICAL NEW HAMPSHIRE COVERED BRIDGE HOUSING, WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PERSPECTIVE NORTHEAST. NOTE TYPICAL NEW HAMPSHIRE COVERED BRIDGE HOUSING, WITH UPPER PORTION OF TRUSSES LEFT EXPOSED AND VERTICAL PLANK SIDING COVERING THE LOWER PORTION. - Mechanic Street Bridge, Spanning Israel River, Lancaster, Coos County, NH

Past and predicted future changes in the land cover of the Upper Mississippi River floodplain, USA

USGS Publications Warehouse

De Jager, N. R.; Rohweder, J.J.; Nelson, J.C.

2013-01-01

This study provides one historical and two alternative future contexts for evaluating land cover modifications within the Upper Mississippi River (UMR) floodplain. Given previously documented changes in land use, river engineering, restoration efforts and hydro-climatic changes within the UMR basin and floodplain, we wanted to know which of these changes are the most important determinants of current and projected future floodplain land cover. We used Geographic Information System data covering approximately 37% of the UMR floodplain (3232 km2) for ca 1890 (pre-lock and dam) and three contemporary periods (1975, 1989 and 2000) across which river restoration actions have increased and hydro-climatic changes have occurred. We further developed two 50-year future scenarios from the spatially dependent land cover transitions that occurred from 1975 to 1989 (scenario A) and from 1989 to 2000 (scenario B) using Markov models.Land cover composition of the UMR did not change significantly from 1975 to 2000, indicating that current land cover continues to reflect historical modifications that support agricultural production and commercial navigation despite some floodplain restoration efforts and variation in river discharge. Projected future land cover composition based on scenario A was not significantly different from the land cover for 1975, 1989 or 2000 but was different from the land cover of scenario B, which was also different from all other periods. Scenario B forecasts transition of some forest and marsh habitat to open water by the year 2050 for some portions of the northern river and projects that some agricultural lands will transition to open water in the southern portion of the river. Future floodplain management and restoration planning efforts in the UMR should consider the potential consequences of continued shifts in hydro-climatic conditions that may occur as a result of climate change and the potential effects on floodplain land cover.

CHARGE BOTTLE FOR A MASS SEPARATOR

DOEpatents

Davidson, P.H.

1959-07-01

Improved mass separator charge bottles are described for containing a dense charge of a chemical compound of copper, nickel, lead or other useful substance which is to be vaporized, and to the method of utilizing such improvcd charge bottles so that the chemical compound is vaporized from the under surface of the charge and thus permits the non-volatile portion thereof to fall to the bottom of the charge bottle where it does not form an obstacle to further evaporation. The charge bottle comprises a vertically disposed cylindrical portion, an inner re-entrant cylindrical portion extending axially and downwardly into the same from the upper end thereof, and evaporative source material in the form of a chemical compound compacted within the upper annular pontion of the charge bottle formed by the re-entrant cylindrical portion, whereby vapor from the chemical compound will pass outwardly from the charge bottle through an apertured closure.

Funnel for localizing biological cell placement and arrangement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soscia, David; Benett, William J.; Mukerjee, Erik V.

2018-03-06

The present disclosure relates to a funnel apparatus for channeling cells onto a plurality of distinct, closely spaced regions of a seeding surface. The funnel apparatus has a body portion having an upper surface and a lower surface. The body portion forms a plurality of flow paths, at least one of which is shaped to have a decreasing cross-sectional area from the upper surface to the lower surface. The flow paths are formed at the lower surface to enable cells deposited into the flow paths at the upper surface of the funnel apparatus to be channeled into a plurality ofmore » distinct, closely spaced regions on the seeding surface positioned adjacent the lower surface.« less

Benefits of maxillectomy with internal dissection of the masticator space by transmandibular approach in the surgical management of malignant tumours of the upper gingiva and hard palate: a clinical review of 10 cases.

PubMed

Yanamoto, S; Yamada, S; Takahashi, H; Naruse, T; Shigeta, T; Minamikawa, T; Shibuya, Y; Komori, T; Umeda, M

2014-11-01

The aim of this study was to review patients with tumours extending to the posterior portion of the upper gingiva and hard palate, and to evaluate the postoperative outcomes. Ten consecutive patients with tumours in the upper gingiva and hard palate, who underwent maxillectomy with internal dissection of the masticator space by the transmandibular approach, were reviewed retrospectively. Among the 10 patients, the pathological diagnosis was squamous cell carcinoma in seven, adenoid cystic carcinoma in one, malignant melanoma in one, and osteosarcoma in one. Loco-regional control was achieved in eight of nine patients (88.9%). Three patients had residual moderate trismus. Cosmetic issues were not noted in any patient. En bloc resection of the maxilla with the internal portion of the masticator space and neck through the parapharyngeal space by the transmandibular approach is a useful and satisfactory technique for the excision of a tumour with involvement of the posterior portion of the upper gingiva and hard palate. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Welding torch gas cup extension

NASA Technical Reports Server (NTRS)

Gordon, Stephen S. (Inventor)

1988-01-01

The invention relates to a gas shielded electric arc welding torch having a detachable gas cup extension which may be of any desired configuration or length. The gas cup extension assembly is mounted on a standard electric welding torch gas cup to enable welding in areas with limited access. The gas cup assembly has an upper tubular insert that fits within the gas cup such that its lower portion protrudes thereform and has a lower tubular extension that is screwed into the lower portion. The extension has a rim to define the outer perimeter of the seat edge about its entrance opening so a gasket may be placed to effect an airtight seal between the gas cup and extension. The tubular extension may be made of metal or cermaic material that can be machined. The novelty lies in the use of an extension assembly for a standard gas cup of an electric arc welding torch which extension assembly is detachable permitting the use of a number of extensions which may be of different configurations and materials and yet fit the standard gas cup.

Evolution of Meso-Cenozoic lithospheric thermal-rheological structure in the Jiyang sub-basin, Bohai Bay Basin, eastern North China Craton

NASA Astrophysics Data System (ADS)

Xu, Wei; Qiu, Nansheng; Wang, Ye; Chang, Jian

2018-01-01

The Meso-Cenozoic lithospheric thermal-rheological structure and lithospheric strength evolution of the Jiyang sub-basin were modeled using thermal history, crustal structure, and rheological parameter data. Results indicate that the thermal-rheological structure of the Jiyang sub-basin has exhibited obvious rheological stratification and changes over time. During the Early Mesozoic, the uppermost portion of the upper crust, middle crust, and the top part of the upper mantle had a thick brittle layer. During the early Early Cretaceous, the top of the middle crust's brittle layer thinned because of lithosphere thinning and temperature increase, and the uppermost portion of the upper mantle was almost occupied by a ductile layer. During the late Early Cretaceous, the brittle layer of the middle crust and the upper mantle changed to a ductile one. Then, the uppermost portion of the middle crust changed to a thin brittle layer in the late Cretaceous. During the early Paleogene, the thin brittle layer of the middle crust became even thinner and shallower under the condition of crustal extension. Currently, with the decrease in lithospheric temperature, the top of the upper crust, middle crust, and the uppermost portion of the upper mantle are of a brittle layer. The total lithospheric strength and the effective elastic thickness ( T e) in Meso-Cenozoic indicate that the Jiyang sub-basin experienced two weakened stages: during the late Early Cretaceous and the early Paleogene. The total lithospheric strength (approximately 4-5 × 1013 N m-1) and T e (approximately 50-60 km) during the Early Mesozoic was larger than that after the Late Jurassic (2-7 × 1012 N m-1 and 19-39 km, respectively). The results also reflect the subduction, and rollback of Pacific plate is the geodynamic mechanism of the destruction of the eastern North China Craton.

Block coals from Indiana: Inferences on changing depositional environment

USGS Publications Warehouse

Mastalerz, Maria; Padgett, P.L.; Eble, C.F.

2000-01-01

Significant differences in coal petrography, palynology and coal quality were found between the Lower Block and Upper Block Coal Members (Brazil Formation, Pennsylvanian) in Daviess County, Indiana. The Lower Block Coal Member ranges in thickness from 51 to 74 cm and the Upper Block Coal Member ranges from 20 to 65 cm. Average sulfur content and ash yield of the Lower Block coal (0.98%, 7.65%) are lower than in the Upper Block coal. Megascopically, the coals show distinct differences. The Lower Block is a banded coal with numerous thin fusain horizons and a thin clay parting in the lower third of the seam. The Upper Block coal has a dulling-upward trend, with a bright clarain found at the base that grades into a clarain and then into a durain in the upper portion of the seam. Vitrinite content of the Lower Block coal ranges from 63% to 78%, with the highest vitrinite content found in the middle portion of the seam. In the Upper Block coal, vitrinite content ranges from 40% to 83%, with the highest values found in the lower part of the seam. Ash yield is higher in the upper part of the Upper Block coal, reaching up to 40%. The Lower Block coal is dominated by lycopod trees and tree ferns. The Upper Block coal shows marked differences in spore assemblages between lower and upper parts of the seam. The lower half is dominated by large lycopod trees and tree ferns, similar to the Lower Block coal. The upper half is dominated by small lycopods, mainly Densosporites and Radiizonates. These differences between the Lower Block and Upper Block Coal Members are significant correlation tools applicable to mining exploration and chronostratigraphy. (C) 2000 Elsevier Science B.V. All rights reserved.Significant differences in coal petrography, palynology and coal quality were found between the Lower Block and Upper Block Coal Members (Brazil Formation, Pennsylvanian) in Daviess County, Indiana. The Lower Block Coal Member ranges in thickness from 51 to 74 cm and the Upper Block Coal Member ranges from 20 to 65 cm. Average sulfur content and ash yield of the Lower Block coal (0.98%, 7.65%) are lower than in the Upper Block coal. Megascopically, the coals show distinct differences. The Lower Block is a banded coal with numerous thin fusain horizons and a thin clay parting in the lower third of the seam. The Upper Block coal has a dulling-upward trend, with a bright clarain found at the base that grades into a clarain and then into a durain in the upper portion of the seam. Vitrinite content of the Lower Block coal ranges from 63% to 78%, with the highest vitrinite content found in the middle portion of the seam. In the Upper Block coal, vitrinite content ranges from 40% to 83%, with the highest values found in the lower part of the seam. Ash yield is higher in the upper part of the Upper Block coal, reaching up to 40%. The Lower Block coal is dominated by lycopod trees and tree ferns. The Upper Block coal shows marked differences in spore assemblages between lower and upper parts of the seam. The lower half is dominated by large lycopod trees and tree ferns, similar to the Lower Block coal. The upper half is dominated by small lycopods, mainly Densosporites and Radiizonates. These differences between the Lower Block and Upper Block Coal members are significant correlation tools applicable to mining exploration and chronostratigraphy.

Beach Cusps: Spatial distribution and time evolution at Massaguaçú beach (SP), Brazil

NASA Astrophysics Data System (ADS)

dos Santos, H. H.; Siegle, E.; Sousa, P. H.

2013-05-01

Beach cusps are crescentic morphological structures observed on the foreshore of beaches characterized by steep seaward protruding extensions, called cusp horns, and gently sloped landward extensions, called cusp embayments. Their formation depends on the grain size, beach slope, tidal range and incoming waves. Cusps are best developed on gravel or shingle beaches, small tidal range with a large slope for incoming waves generate a well-developed swash excursion. These structures are quickly responding to wave climate and tidal range, changing the position of the rhythmic features on the beach face. Beach cusps are favored by normal incoming waves, while oblique waves tend to wash these features out. This study aims to analyze the spatial distribution and temporal evolution of rhythmic features such as beach cusps in Massaguaçú embayment (Caraguatatuba, northern coast of São Paulo, Brazil). This embayment has an extension of 7.5 km with reflective beaches cusped mainly in its more exposed central portion. The data set for this study consists of a series of video images (Argus system), covering a stretch of the beach. Visible beach cusps were digitalized from these rectified images. Results obtained from the images were related to the wave climate, water level and the storm surges. Results show that the cusps on the upper portion of the foreshore were more regular and present than the cusps on the lower portion of the foreshore due to the tidal modulation of wave action. The cusp spacing on the upper portion of the foreshore is of about 38 m and the lower portion of the foreshore is of about 28 m and their presence was correlated with the wave direction and water elevation. As expected, waves approaching with shore-normal angles (southeast direction) were favorable to the formation of beach cusps while the waves from the southwest, south, east and northeast generated a longshore current that reduced or destroyed any rhythmic feature. Other important forcing was the influence of the water level. Waves acting at higher water levels are able to produce the less dynamic upper layer of cusps. During 31 consecutive days from 8 July 2011 to 8 August of the same year these features show four periods with the presence of cusps on the upper and lower portion of the foreshore with three periods with cups only on the upper portion of the foreshore. The analyzed dataset shows the highly dynamic behavior of cusps, with rapid generation and destruction, related directly to its forcing hydrodynamic conditions.

A Spectrally Selective Attenuation Mechanism-Based Kpar Algorithm for Biomass Heating Effect Simulation in the Open Ocean

NASA Astrophysics Data System (ADS)

Chen, Jun; Zhang, Xiangguang; Xing, Xiaogang; Ishizaka, Joji; Yu, Zhifeng

2017-12-01

Quantifying the diffuse attenuation coefficient of the photosynthetically available radiation (Kpar) can improve our knowledge of euphotic depth (Zeu) and biomass heating effects in the upper layers of oceans. An algorithm to semianalytically derive Kpar from remote sensing reflectance (Rrs) is developed for the global open oceans. This algorithm includes the following two portions: (1) a neural network model for deriving the diffuse attention coefficients (Kd) that considers the residual error in satellite Rrs, and (2) a three band depth-dependent Kpar algorithm (TDKA) for describing the spectrally selective attenuation mechanism of underwater solar radiation in the open oceans. This algorithm is evaluated with both in situ PAR profile data and satellite images, and the results show that it can produce acceptable PAR profile estimations while clearly removing the impacts of satellite residual errors on Kpar estimations. Furthermore, the performance of the TDKA algorithm is evaluated by its applicability in Zeu derivation and mean temperature within a mixed layer depth (TML) simulation, and the results show that it can significantly decrease the uncertainty in both compared with the classical chlorophyll-a concentration-based Kpar algorithm. Finally, the TDKA algorithm is applied in simulating biomass heating effects in the Sargasso Sea near Bermuda, with new Kpar data it is found that the biomass heating effects can lead to a 3.4°C maximum positive difference in temperature in the upper layers but could result in a 0.67°C maximum negative difference in temperature in the deep layers.

Method for testing the strength and structural integrity of nuclear fuel particles

DOEpatents

Lessing, P.A.

1995-10-17

An accurate method for testing the strength of nuclear fuel particles is disclosed. Each particle includes an upper and lower portion, and is placed within a testing apparatus having upper and lower compression members. The upper compression member includes a depression therein which is circular and sized to receive only part of the upper portion of the particle. The lower compression member also includes a similar depression. The compression members are parallel to each other with the depressions therein being axially aligned. The fuel particle is then placed between the compression members and engaged within the depressions. The particle is then compressed between the compression members until it fractures. The amount of force needed to fracture the particle is thereafter recorded. This technique allows a broader distribution of forces and provides more accurate results compared with systems which distribute forces at singular points on the particle. 13 figs.

Method for testing the strength and structural integrity of nuclear fuel particles

DOEpatents

Lessing, Paul A.

1995-01-01

An accurate method for testing the strength of nuclear fuel particles. Each particle includes an upper and lower portion, and is placed within a testing apparatus having upper and lower compression members. The upper compression member includes a depression therein which is circular and sized to receive only part of the upper portion of the particle. The lower compression member also includes a similar depression. The compression members are parallel to each other with the depressions therein being axially aligned. The fuel particle is then placed between the compression members and engaged within the depressions. The particle is then compressed between the compression members until it fractures. The amount of force needed to fracture the particle is thereafter recorded. This technique allows a broader distribution of forces and provides more accurate results compared with systems which distribute forces at singular points on the particle.

Unbalanced-flow, fluid-mixing plug with metering capabilities

NASA Technical Reports Server (NTRS)

England, John Dwight (Inventor); Kelley, Anthony R. (Inventor); Van Buskirk, Paul D. (Inventor)

2009-01-01

A fluid mixer plug has holes formed therethrough such that a remaining portion is closed to fluid flow. The plug's inlet face defines a central circuit region and a ring-shaped region with the ring-shaped region including at least some of the plug's remaining portion so-closed to fluid flow. This remaining portion or closed region at each radius R of the ring shaped region satisfies a radius independent, flow-based relationship. Entry openings are defined in the plug's inlet face in correspondence with the holes. The entry openings define an open flow area at each radius of the ring-shaped region. The open flow area at each such radius satisfies the inverse of the flow-based relationship defining the closed regions of the plug.

Light collection optics for measuring flux and spectrum from light-emitting devices

DOEpatents

McCord, Mark A.; DiRegolo, Joseph A.; Gluszczak, Michael R.

2016-05-24

Systems and methods for accurately measuring the luminous flux and color (spectra) from light-emitting devices are disclosed. An integrating sphere may be utilized to directly receive a first portion of light emitted by a light-emitting device through an opening defined on the integrating sphere. A light collector may be utilized to collect a second portion of light emitted by the light-emitting device and direct the second portion of light into the integrating sphere through the opening defined on the integrating sphere. A spectrometer may be utilized to measure at least one property of the first portion and the second portion of light received by the integrating sphere.

Two-phase pressure drop reduction BWR assembly design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dix, G.E.; Crowther, R.L.; Colby, M.J.

1992-05-12

This patent describes a boiling water reactor having discrete bundles of fuel rods confined within channel enclosed fuel assemblies, an improvement to a fuel bundle assembly for placement in the reactor. It comprises a fuel channel having vertically extending walls forming a continuous channel around a fuel assembly volume, the channel being open at the bottom end for engagement to a lower tie plate and open at the upper end for engagement to an upper tie plate; rods for placement within the chamber, each the rod containing fissile material for producing nuclear reaction when in the presence of sufficient moderatedmore » neutron flux; a lower tie plate for supporting the bundle of rods within the channel, the lower tie plate for supporting the bundle of rods within the channel, the lower tie plate joining the bottom of the channel to close the bottom end of the channel, the lower tie plate providing defined apertures for the inflow of water in the channel between the rods for the generating of steam during the nuclear reaction; the plurality of fuel rods extending from the lower tie plate wherein a single phase region of the water in the bundle is defined to an upward portion of the bundle wherein a two phase region of the water and steam in the bundle is defined during nuclear steam generating reaction in the fuel bundle.« less

27. VIEW OF SOUTHERN PORTION OF EAST BOILER ROOM LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. VIEW OF SOUTHERN PORTION OF EAST BOILER ROOM LOOKING EAST AT UPPER PORTION BOILER 904. BOILER 904 WAS MANUFACTURED BY RILEY STOKER AND INSTALLED IN 1944. ORIGINALLY FUELED BY PULVERIZED COAL, IT WAS CONVERTED TO GAS/OIL OPERATION IN 1978 AND OPERATED UNTIL THE PLANT CLOSED. - New York, New Haven & Hartford Railroad, Cos Cob Power Plant, Sound Shore Drive, Greenwich, Fairfield County, CT

Axisymmetrical separator for separating particulate matter from a fluid carrying medium

DOEpatents

Linhardt, Hans D.

1984-09-04

A separator for separating particles carried in a fluid carrying medium is disclosed. The separator includes an elongated duct and associated openings incorporated in a solid body. The duct is axisymmetrical relative to its longitudinal axis, and includes a curved wall portion having a curved cross-section taken along the longitudinal axis. An axisymmetrical opening located downstream of the curved wall portion leads from the duct into an axisymmetrical channel which is substantially radially disposed relative to the longitudinal axis. Continuation of the duct downstream of the opening is a discharge portion which is substantially colinear with the longitudinal axis. In operation, a substantial majority of the fluid carrying medium leaves the duct radially through the opening and channel in a state substantially free of particles. A remaining small portion of the fluid carrying medium and a substantial majority of the particles are channelled into the discharge portion by centrifugal forces arising due to travel of the particles along the curved walls. For industrial scale separation of particles from a fluid carrying medium, such as for the clean-up of stack gases, an array of several hundred to several thousand of the separators is provided.

Urban Stream Burial Increases Watershed-Scale Nitrate Export.

PubMed

Beaulieu, Jake J; Golden, Heather E; Knightes, Christopher D; Mayer, Paul M; Kaushal, Sujay S; Pennino, Michael J; Arango, Clay P; Balz, David A; Elonen, Colleen M; Fritz, Ken M; Hill, Brian H

2015-01-01

Nitrogen (N) uptake in streams is an important ecosystem service that reduces nutrient loading to downstream ecosystems. Here we synthesize studies that investigated the effects of urban stream burial on N-uptake in two metropolitan areas and use simulation modeling to scale our measurements to the broader watershed scale. We report that nitrate travels on average 18 times farther downstream in buried than in open streams before being removed from the water column, indicating that burial substantially reduces N uptake in streams. Simulation modeling suggests that as burial expands throughout a river network, N uptake rates increase in the remaining open reaches which somewhat offsets reduced N uptake in buried reaches. This is particularly true at low levels of stream burial. At higher levels of stream burial, however, open reaches become rare and cumulative N uptake across all open reaches in the watershed rapidly declines. As a result, watershed-scale N export increases slowly at low levels of stream burial, after which increases in export become more pronounced. Stream burial in the lower, more urbanized portions of the watershed had a greater effect on N export than an equivalent amount of stream burial in the upper watershed. We suggest that stream daylighting (i.e., uncovering buried streams) can increase watershed-scale N retention.

Urban Stream Burial Increases Watershed-Scale Nitrate Export

PubMed Central

Beaulieu, Jake J.; Golden, Heather E.; Knightes, Christopher D.; Mayer, Paul M.; Kaushal, Sujay S.; Pennino, Michael J.; Arango, Clay P.; Balz, David A.; Elonen, Colleen M.; Fritz, Ken M.; Hill, Brian H.

2015-01-01

Nitrogen (N) uptake in streams is an important ecosystem service that reduces nutrient loading to downstream ecosystems. Here we synthesize studies that investigated the effects of urban stream burial on N-uptake in two metropolitan areas and use simulation modeling to scale our measurements to the broader watershed scale. We report that nitrate travels on average 18 times farther downstream in buried than in open streams before being removed from the water column, indicating that burial substantially reduces N uptake in streams. Simulation modeling suggests that as burial expands throughout a river network, N uptake rates increase in the remaining open reaches which somewhat offsets reduced N uptake in buried reaches. This is particularly true at low levels of stream burial. At higher levels of stream burial, however, open reaches become rare and cumulative N uptake across all open reaches in the watershed rapidly declines. As a result, watershed-scale N export increases slowly at low levels of stream burial, after which increases in export become more pronounced. Stream burial in the lower, more urbanized portions of the watershed had a greater effect on N export than an equivalent amount of stream burial in the upper watershed. We suggest that stream daylighting (i.e., uncovering buried streams) can increase watershed-scale N retention. PMID:26186731

Device for determining frost depth and density

NASA Technical Reports Server (NTRS)

Huneidi, F.

1983-01-01

A hand held device having a forward open window portion adapted to be pushed downwardly into the frost on a surface, and a rear container portion adapted to receive the frost removed from the window area are described. A graph on a side of the container enables an observer to determine the density of the frost from certain measurements noted. The depth of the frost is noted from calibrated lines on the sides of the open window portion.

Separation of solids by varying the bulk density of a fluid separating medium

DOEpatents

Peterson, Palmer L.; Duffy, James B.; Tokarz, Richard D.

1978-01-01

A method and apparatus for separating objects having a density greater than a selected density value from objects having a density less than said selected density value. The method typically comprises: (a) providing a separation vessel having an upper and lower portion, said vessel containing a liquid having a density exceeding said selected density value; (b) reducing the apparent density of the liquid to said selected density value by introducing solid, bubble-like bodies having a density less than that of the liquid into the lower portion of the vessel and permitting them to rise therethrough; (c) introducing the objects to be separated into the separation vessel and permitting the objects having a density greater than the apparent density of the liquid to sink to the lower portion of the vessel, while the objects having a density less than said selected density value float in the upper portion of the vessel; and (d) separately removing the higher density objects in the lower portion and the lower density objects in the upper portion from the separation vessel. The apparatus typically comprises: (a) a vessel containing a liquid having a density such that at least part of said objects having a density exceeding said selected density value will float therein; (b) means to place said objects into said vessel; (c) means to reduce the effective density of at least a portion of said liquid to said selected density value, whereby said objects having a density exceeding said selected density value sink into said liquid and said objects having a density less than said selected density value remain afloat, said means to adjust the effective density comprising solid, bubble-like bodies having a density less than said selected density value and means for introducing said bodies into said liquid; and (d) means for separately removing said objects having a density exceeding said selected density value and said objects having a density less than said selected density value from said vessel.

Tube support for moisture separator reheater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sabatino, R.A.

1987-08-11

In combination with a moisture separator reheater for a nuclear steam generating power plant, a reheater is described comprising: a sealed elongated substantially horizontal tubular shell member, a cycle fluid inlet passing through the shell member in predetermined position, mositure separator means positioned within the shell member proximate the bottom portion thereof, heat exchanger means comprising a plurality of elongated metallic U-shaped members disposed substantially within the shell member, a tube sheet member supporing the U-shaped tube members at one end thereof. The improvement consists of: the tube support member means proximate the U-bend portion of the U-shaped tube membersmore » each comprising an upper movable tube support member and a lower immovable tube support member, the remainder of the tube support means being immovable, the upper movable tube support member spacing and supporting the top leg portions of the U-shaped tube members, the lower immovable tube support member spacing and supporting the bottom leg portions of the U-shaped tube members, whereby the top leg portions of the U-shaped tube members proximate the U-bend are permitted to move to compensate for any increase in radius in the U-bend portion of the U-shaped tube member due to thermal expansion.« less

Adhesive Bubble Removal Method and Apparatus for Fiber Optic Applications

NASA Technical Reports Server (NTRS)

Kolasinski, John R. (Inventor)

2001-01-01

An assembly for supporting a fiber optic termination or connector in a centrifuge and comprising a cylindrical body member having a top portion adapted to receive the ferrule body portion of a fiber optic termination or connector and a bottom portion for receiving a cylindrical piston/sealing unit is presented. The piston portion of the piston/sealing unit includes a compressible tip which is adapted to a butt up against the outer end of the ferrule body portion of the fiber optic termination or connector. A cylindrical end cap fits over the upper end of the body member for holding the fiber optic termination in place on the body member and causing a seal to be formed between the termination or connector and the upper portion of the body member adjacent the compressible tip of the plunger. The parts, when fitted together, are placed in a centrifuge which is operated for a predetermined spin cycle, so as to cause any bubbles in the uncured liquid adhesive to be vented outwardly from the termination through the end cap. Subsequent removal of the fiber optic termination or connector from the centrifuge and assembly is "bubble free" and ready to be joined with an optical fiber which is inserted in the ferrule end of the termination or connector.

Adhesive bubble removal method and apparatus for fiber applications

NASA Technical Reports Server (NTRS)

Kolasinski, John R. (Inventor)

2005-01-01

An assembly for supporting a fiber optic termination or connector in a centrifuge and comprising a cylindrical body member having a top portion adapted to receive the ferrule body portion of a fiber optic termination or connector and a bottom portion for receiving a cylindrical piston/sealing unit. The piston portion of the piston/sealing unit includes a compressible tip which is adapted to a butt up against the outer end of the ferrule body portion of the fiber optic termination or connector. A cylindrical end cap fits over the upper end of the body member for holding the fiber optic termination in place on the body member and causing a seal to be formed between the termination or connector and the upper portion of the body member adjacent the compressible tip of the plunger. The parts, when fitted together, are placed in a centrifuge which is operated for a predetermined spin cycle, so as to cause any bubbles in the uncured liquid adhesive to be vented outwardly from the termination through the end cap. Subsequent removal of the fiber optic termination or connector from the centrifuge and assembly is bubble free and ready to be joined with an optical fiber which is inserted in the ferrule end of the termination or connector.

Multi-layer waste containment barrier

DOEpatents

Smith, Ann Marie; Gardner, Bradley M.; Nickelson, David F.

1999-01-01

An apparatus for constructing an underground containment barrier for containing an in-situ portion of earth. The apparatus includes an excavating device for simultaneously (i) excavating earthen material from beside the in-situ portion of earth without removing the in-situ portion and thereby forming an open side trench defined by opposing earthen sidewalls, and (ii) excavating earthen material from beneath the in-situ portion of earth without removing the in-situ portion and thereby forming a generally horizontal underground trench beneath the in-situ portion defined by opposing earthen sidewalls. The apparatus further includes a barrier-forming device attached to the excavating device for simultaneously forming a side barrier within the open trench and a generally horizontal, multi-layer barrier within the generally horizontal trench. The multi-layer barrier includes at least a first layer and a second layer.

Proposed technique for open repair of a small umbilical hernia and rectus divarication with self-gripping mesh.

PubMed

Privett, B J; Ghusn, M

2016-08-01

There are a group of patients in which umbilical or epigastric hernias co-exist with rectus divarication. These patients have weak abdominal musculature and are likely to pose a higher risk of recurrence following umbilical hernia repair. We would like to describe a technique for open repair of small (<4 cm) midline hernias in patients with co-existing rectus divarication using self-adhesive synthetic mesh. The use of a self-adhesive mesh avoids the need for suture fixation of the mesh in the superior portion of the abdomen, allowing for a smaller skin incision. In 173 patients, preperitoneal self-fixating mesh has been used for the repair of midline hernias <4 cm in diameter. In 58 of these patients, the mesh was extended superiorly to reinforce a concurrent divarication. The described technique offers a simple option for open repair of small midline hernias in patients with co-existing rectus divarication, to decrease the risk of upper midline recurrence in an at-risk patient group. This initial case series is able to demonstrate a suitably low rate of recurrence and complications.

Precise hypocenter distribution and earthquake generating and stress in and around the upper-plane seismic belt in the subducting Pacific slab beneath NE Japan

NASA Astrophysics Data System (ADS)

Kita, S.; Okada, T.; Nakajima, J.; Matsuzawa, T.; Uchida, N.; Hasegawa, A.

2007-12-01

1. Introduction We found an intraslab seismic belt (upper-plane seismic belt) in the upper plane of the double seismic zone within the Pacific slab, running interface at depths of 70-100km beneath the forearc area. The location of the deeper limits of this belt appears to correspond to one of the facies boundaries (from jadeite lawsonite blueschist to lawsonite amphibole eclogite) in the oceanic crust [Kita et al., 2006, GRL]. In this study, we precisely relocated intraslab earthquakes by using travel time differences calculated by the waveform cross-spectrum analysis to obtain more detailed distribution of the upper plane-seismic belt within the Pacific slab beneath NE Japan. We also discuss the stress field in the slab by examining focal mechanisms of the earthquakes. 2. Data and Method We relocated events at depths of 50-00 km for the period from March 2003 to November 2006 from the JMA earthquake catalog. We applied the double-difference hypocenter location method (DDLM) by Waldhauser and Ellsworth (2000) to the arrival time data of the events. We use relative earthquake arrival times determined both by the waveform cross-spectrum analysis and by the catalog-picking data. We also determine focal mechanisms using the P wave polarity. 3. Spatial distribution of relocated hypocenters In the upper portion of the slab crust, seismicity is very active and distributed relatively homogeneously at depths of about 70-100km parallel to the volcanic front, where the upper-plane seismic belt has been found. In the lower portion of slab crust and/or the uppermost portion of the slab mantle, seismicity is spatially very limited to some small areas (each size is about 20 x 20km) at depths around 65km. Two of them correspond to the aftershock area of the 2003 Miyagi (M7.1) intraslab earthquake and that of the 1987 Iwaizumi (M6.6) intraslab earthquake, respectively. Based on the dehydration embrittelment hypothesis, the difference of the spatial distribution of the seismicity in the slab should correspond to the difference of the spatial distribution of the hydrated minerals and their dehydration reactions. In the upper slab crust, the upper-plane seismic belt is found because the hydrated minerals could be distributed homogeneously and the dehydration reaction (from jadeite lawsonite blueschist to lawsonite amphibole eclogite [Hacker et al., 2003b]) occurs perhaps largely at depth of 70-100km. Our result also suggests that in the lower portion of the slab crust and/or the uppermost portion of the slab mantle, the hydrated minerals could be inhomogeneously distributed and the seismicity occurs at depths around 65km, where another dehydration reaction may exist. 4. Characteristics of the focal mechanisms We examined the stress distribution within the slab by using focal mechanisms of the upper plane, interplane and lower plane events. From the plate interface to about 20 km below it, downdip-compressional (DC) type events are dominant. Below 20km from the plate interface, downdip-tensional (DT) type events are dominant. Many of interplane events have DC type focal mechanisms because of their locations in the uppermost portions of the slab mantle. These results indicate that the stress neutral plane from the DC type to DT type could be located at depth of about 20km from the plate interface.

Second report on the Oak Ridge Y-12 Plant fish kill for Upper East Fork Poplar Creek

DOE Office of Scientific and Technical Information (OSTI.GOV)

Etnier, E.L.; Opresko, D.M.; Talmage, S.S.

1994-08-01

This report summarizes the monitoring of fish kills in upper East Fork Poplar Creek (EFPC) from July 1990 to June 1993. Since the opening of Lake Reality (LR) in 1988, total numbers of fish inhabiting upper EFPC have increased. However, species diversity has remained poor. Water quality data have been collected in upper EFPC during the time period covered in this report. Total residual chlorine (TRC) levels have exceeded federal and state water quality criteria over the years. However, with the installation of two dechlorination systems in late 1992, TRC levels have been substantially lowered in most portions of uppermore » EFPC. By June 1993, concentrations of TRC were 0.04 to 0.06 mg/L at the north-south pipes (NSP) and below detection limits at sampling station AS-8 and were 0 to 0.01 mg/L at the inlet and outlet of LR. The daily chronic fish mortality in upper EFPC has been attributed to background stress resulting from the continuous discharge of chlorine into upper EFPC. Mean daily mortality rates for 22 acute fish kills were three fold or more above background and usually exceeded ten fish per day. Total number of dead fish collected per acute kill event ranged from 30 to over 1,000 fish; predominant species killed were central stonerollers (Campostoma anomalum) and striped shiners (Luxilus chrysocephalus). Spills or elevated releases of toxic chemicals, such as acids, organophosphates, aluminum nitrate, ammonia, or chlorine, were identified as possible causative agents; however, a definitive cause-effect relationship was rarely established for any acute kills. Ambient toxicity testing, in situ chemical monitoring, and streamside experiments were used to examine TRC dynamics and ambient toxicity in EFPC.« less

Turbine inner shroud and turbine assembly containing such inner shroud

DOEpatents

Bagepalli, Bharat Sampathkumaran; Corman, Gregory Scot; Dean, Anthony John; DiMascio, Paul Stephen; Mirdamadi, Massoud

2001-01-01

A turbine inner shroud and a turbine assembly. The turbine assembly includes a turbine stator having a longitudinal axis and having an outer shroud block with opposing and longitudinally outward facing first and second sides having open slots. A ceramic inner shroud has longitudinally inward facing hook portions which can longitudinally and radially surround a portion of the sides of the outer shroud block. In one attachment, the hook portions are engageable with, and are positioned within, the open slots.

Upper-extremity functional electric stimulation-assisted exercises on a workstation in the subacute phase of stroke recovery.

PubMed

Kowalczewski, Jan; Gritsenko, Valeriya; Ashworth, Nigel; Ellaway, Peter; Prochazka, Arthur

2007-07-01

To test the efficacy of functional electric stimulation (FES)-assisted exercise therapy (FES-ET) on a workstation in the subacute phase of recovery from a stroke. Single-blind, randomly controlled comparison of high- and low-intensity treatment. Laboratory in a rehabilitation hospital. Nineteen stroke survivors (10 men, 9 women; mean age +/- standard deviation, 60.6+/-5.8y), with upper-extremity hemiplegia (mean poststroke time, 48+/-17d). The main inclusion criteria were: stroke occurred within 3 months of onset of trial and resulted in severe upper-limb dysfunction, and FES produced adequate hand opening. An FES stimulator and an exercise workstation with instrumented objects were used by 2 groups to perform specific motor tasks with their affected upper extremity. Ten subjects in the high-intensity FES-ET group received FES-ET for 1 hour a day on 15 to 20 consecutive workdays. Nine subjects in the low-intensity FES-ET group received 15 minutes of sensory electric stimulation 4 days a week and on the fifth day they received 1 hour of FES-ET. Primary outcome measure included the Wolf Motor Function Test (WMFT). Secondary outcome measures included the Motor Activity Log (MAL), the upper-extremity portion of the Fugl-Meyer Assessment (FMA), and the combined kinematic score (CKS) derived from workstation measurements. The WMFT, MAL, and FMA were used to assess function in the absence of FES whereas CKS was used to evaluate function assisted by FES. Improvements in the WMFT and CKS were significantly greater in the high-intensity group (post-treatment effect size, .95) than the low-intensity group (post-treatment effect size, 1.3). The differences in MAL and FMA were not statistically significant. Subjects performing high-intensity FES-ET showed significantly greater improvements on the WMFT than those performing low-intensity FES-ET. However, this was not reflected in subjects' self-assessments (MAL) or in their FMA scores, so the clinical significance of the result is open to debate. The CKS data suggest that high-intensity FES-ET may be advantageous in neuroprosthetic applications.

Mechanical Stability of Stratified Sediments along the upper continental Slope off Vesterålen, northern Norway - Insights from in situ CPTU Tests

NASA Astrophysics Data System (ADS)

Voelker, D.; Stegmann, S.; Kreiter, S.; L'Heureux, J. S.; Vanneste, M. W. B.; Baeten, N. J.; Knudsen, S.; Rise, L.; Longva, O.; Brendryen, J.; Haflidason, H.; Chand, S.; Mörz, T.; Kopf, A.

2015-12-01

High-resolution single channel-seismic data (3.5 kHz) reveal small-scale submarine landslide structures and superficial deformation features (e.g. tension cracks) along the gently dipping (3°) upper continental slope west of the Vesterålen Archipelago off northern Norway. Previous laboratory-based geotechnical studies attest that the slope is per sestable and that seismic events in an order of magnitude M5.7 may have triggered the slope sediments to fail. Here we present geotechnical in situ data (sedimentary strength, pore pressure), which were obtained with RV Poseidon in summer 2014 using the static CPTU system GOST. The CPTU system provided high-resolution geotechnical profiles of the uppermost sediments to a maximum penetration depth of ~ 20 m at six sites within the landslide features and beside them in undisturbed slope sediments as reference. The CPTU data reveal the occurrence of mechanically weaker zones (MWZ) by the drop of sedimentary strength. These zones are interbedded by coarser, more competent layers. The occurrence of sensitive fine-grained material may be responsible for the loss of strength in the deeper portion (appx. 12 to 18 m below seafloor). An 1D infinite pseudo-static stability analysis attests that the mechanically weaker zones (MWZ) correlate well with portions, where the Factor of Safety (FoS) ≤ 1 (meta-stable to unstable) indicates permanent deformation or failure in case additional dynamic load is induced by an earthquake. Thus, the mechanically weak layers can be considered as one important pre-condition for landslide activity. In conclusion, the integration of in situ CPTU data with geophysical data improves soil characterization and hence foster a better understanding of the pre-conditioning factors for slope instability at the upper continental slope off Vesterålen. Risk assessment for the present-day slope off Vesterålen is particularly crucial, because the opening of the region for offshore oil and gas exploration is controversially debated.

Eddy Current Minimizing Flow Plug for Use in Flow Conditioning and Flow Metering

NASA Technical Reports Server (NTRS)

England, John Dwight (Inventor); Kelley, Anthony R. (Inventor)

2015-01-01

An eddy-current-minimizing flow plug has an outer radial wall with open flow channels formed between the plug's inlet and outlet. The plug has a central region coupled to the inner surface of the outer radial wall. Each open flow channel includes (i) a first portion originating at the inlet and converging to a location in the plug where convergence is contributed to by changes in thickness of the outer radial wall and divergence of the central region, and (ii) a second portion originating in the plug and diverging to the outlet where divergence is contributed to by changes in thickness of the outer radial wall and convergence of the central region. For at least a portion of the open flow channels, a central axis passing through the first and second portions is non-parallel with respect to the given direction of the flow.

Eddy Current Minimizing Flow Plug for Use in Flow Conditioning and Flow Metering

NASA Technical Reports Server (NTRS)

England, John Dwight (Inventor); Kelley, Anthony R. (Inventor)

2015-01-01

An eddy-current-minimizing flow plug has open flow channels formed between the plug's inlet and outlet. Each open flow channel includes (i) a first portion that originates at the inlet face and converges to a location within the plug that is downstream of the inlet, and (ii) a second portion that originates within the plug and diverges to the outlet. The diverging second portion is approximately twice the length of the converging first portion. The plug is devoid of planar surface regions at its inlet and outlet, and in fluid flow planes of the plug that are perpendicular to the given direction of a fluid flowing therethrough.

Muscle activity in upper and lower rectus abdominus during abdominal exercises.

PubMed

Sarti, M A; Monfort, M; Fuster, M A; Villaplana, L A

1996-12-01

To compare the intensity of the upper versus lower rectus abdominis (RA) muscle activity provoked by each of two different abdominal exercises and to contrast the intensity of contraction elicited by two different abdominal exercises on each RA muscle portion. Nonrandomized control trial. Kinesiology laboratory in a university medicine faculty. Convenience sample of 33 healthy volunteers. Subjects who had practiced endurance or strength training activities (1.5 hours 3 days a week for 3 years) and those who had not accomplished that criterion comprised a high and a low physical activity group, respectively. Each of these two groups was divided by the ability to perform the exercises into two subgroups: correct and incorrect performers (cp, ic). Average surface iEMG was compared between upper and lower RA and on each muscle portion performing curl-up (CU) and posterior pelvic tilt (PT) exercises. The coefficient of variation, a two-way analysis of variance, and the t test were calculated. The upper RA showed significantly greater activity during performance of CU exercise by the cp subgroups of both high (t = 2.14302, 95%) and low (t = 2.35875, 95%) activity groups. Only the cp subgroup of the high activity group showed that PT was significantly more strenuous than CU exercise on lower RA (t = -2.06467, 95%). Among correct performers, CU produces greater activity on upper RA. For persons who have a high level of activity, PT is more strenuous than CU on lower RA. Among incorrect performers, either exercise indistinctly activates the muscle portions.

Nuclear reactor having a polyhedral primary shield and removable vessel insulation

DOEpatents

Ekeroth, Douglas E.; Orr, Richard

1993-01-01

A nuclear reactor is provided having a generally cylindrical reactor vessel disposed within an opening in a primary shield. The opening in the primary shield is defined by a plurality of generally planar side walls forming a generally polyhedral-shaped opening. The reactor vessel is supported within the opening in the primary shield by reactor vessel supports which are in communication and aligned with central portions of some of the side walls. The reactor vessel is connected to the central portions of the reactor vessel supports. A thermal insulation polyhedron formed from a plurality of slidably insertable and removable generally planar insulation panels substantially surrounds at least a portion of the reactor vessel and is disposed between the reactor vessel and the side walls of the primary shield. The shape of the insulation polyhedron generally corresponds to the shape of the opening in the primary shield. Reactor monitoring instrumentation may be mounted in the corners of the opening in the primary shield between the side walls and the reactor vessel such that insulation is not disposed between the instrumentation and the reactor vessel.

Nuclear reactor having a polyhedral primary shield and removable vessel insulation

DOEpatents

Ekeroth, D.E.; Orr, R.

1993-12-07

A nuclear reactor is provided having a generally cylindrical reactor vessel disposed within an opening in a primary shield. The opening in the primary shield is defined by a plurality of generally planar side walls forming a generally polyhedral-shaped opening. The reactor vessel is supported within the opening in the primary shield by reactor vessel supports which are in communication and aligned with central portions of some of the side walls. The reactor vessel is connected to the central portions of the reactor vessel supports. A thermal insulation polyhedron formed from a plurality of slidably insertable and removable generally planar insulation panels substantially surrounds at least a portion of the reactor vessel and is disposed between the reactor vessel and the side walls of the primary shield. The shape of the insulation polyhedron generally corresponds to the shape of the opening in the primary shield. Reactor monitoring instrumentation may be mounted in the corners of the opening in the primary shield between the side walls and the reactor vessel such that insulation is not disposed between the instrumentation and the reactor vessel. 5 figures.

Internal impacted screw-locking pellet

NASA Technical Reports Server (NTRS)

MacMartin, Malcolm J. (Inventor)

1994-01-01

An elongate fastener having an engaging surface engageable with an engaging surface of a fastener's mate includes a hole extending through a portion of the fastener and having a top opening and a bottom floor, a locking pellet disposed near the bottom floor, a discharge channel communicating between the pellet and through the engaging surface of the fastener and opening out toward the engaging surface of the fastener's mate, and an impact pin in the hole having a top portion protruding through the top opening and a bottom portion near the locking pellet, whereby the pin drives the locking pellet through the discharge channel against the engaging surfaces of the fastener and the fastener's mate whereby to lock the fastener against the fastener's mate.

Thermal conductivity, bulk properties, and thermal stratigraphy of silicic tuffs from the upper portion of hole USW-G1, Yucca Mountain, Nye County, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lappin, A.R.; VanBuskirk, R.G.; Enniss, D.O.

1982-03-01

Thermal-conductivity and bulk-property measurements were made on welded and nonwelded silicic tuffs from the upper portion of Hole USW-G1, located near the southwestern margin of the Nevada Test Site. Bulk-property measurements were made by standard techniques. Thermal conductivities were measured at temperatures as high as 280{sup 0}C, confining pressures to 10 MPa, and pore pressures to 1.5 MPa. Extrapolation of measured saturated conductivities to zero porosity suggests that matrix conductivity of both zeolitized and devitrified tuffs is independent of stratigraphic position, depth, and probably location. This fact allows development of a thermal-conductivity stratigraphy for the upper portion of Hole G1.more » Estimates of saturated conductivities of zeolitized nonwelded tuffs and devitrified tuffs below the water table appear most reliable. Estimated conductivities of saturated densely welded devitrified tuffs above the water table are less reliable, due to both internal complexity and limited data presently available. Estimation of conductivity of dewatered tuffs requires use of different air thermal conductivities in devitrified and zeolitized samples. Estimated effects of in-situ fracturing generally appear negligible.« less

2.5-month-old infants' reasoning about when objects should and should not be occluded.

PubMed

Aguiar, A; Baillargeon, R

1999-09-01

The present research examined 2.5-month-old infants' reasoning about occlusion events. Three experiments investigated infants' ability to predict whether an object should remain continuously hidden or become temporarily visible when passing behind an occluder with an opening in its midsection. In Experiment 1, the infants were habituated to a short toy mouse that moved back and forth behind a screen. Next, the infants saw two test events that were identical to the habituation event except that a portion of the screen's midsection was removed to create a large window. In one event (high-window event), the window extended from the screen's upper edge; the mouse was shorter than the bottom of the window and thus did not become visible when passing behind the screen. In the other event (low-window event), the window extended from the screen's lower edge; although the mouse was shorter than the top of the window and hence should have become fully visible when passing behind the screen, it never appeared in the window. The infants tended to look equally at the high- and low-window events, suggesting that they were not surprised when the mouse failed to appear in the low window. However, positive results were obtained in Experiment 2 when the low-window event was modified: a portion of the screen above the window was removed so that the left and right sections of the screen were no longer connected (two-screens event). The infants looked reliably longer at the two-screens than at the high-window event. Together, the results of Experiments 1 and 2 suggested that, at 2.5 months of age, infants possess only very limited expectations about when objects should and should not be occluded. Specifically, infants expect objects (1) to become visible when passing between occluders and (2) to remain hidden when passing behind occluders, irrespective of whether these have openings extending from their upper or lower edges. Experiment 3 provided support for this interpretation. The implications of these findings for models of the origins and development of infants' knowledge about occlusion events are discussed. Copyright 1999 Academic Press.

Article of Clothing for Storing and Deploying a Scarf

NASA Technical Reports Server (NTRS)

Romero, Robert (Inventor)

2015-01-01

A clothing article surrounds a wearer's upper torso. The article includes connected front portion, a collar. A sleeve is formed in the front portion. A jacket, and coat with an attachable/detachable scarf will be folded and stored in the inter portion of the front side of the collar area with elastic at each end and Velcro onto the inner portion of your collar, therefore eliminating the lost of them by any consumers, and especially children. A sleeve like collar attached to the coat and jacket for storing a scarf and making it easily deployable while in use.

37. VIEW NORTH FROM EAST CRUDE ORE BIN TO CRUSHER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. VIEW NORTH FROM EAST CRUDE ORE BIN TO CRUSHER ADDITION AND CRUSHED OXIDIZED ORE BIN. VISIBLE ARE DINGS MAGNETIC PULLEY (CENTER), THE 100-TON STEEL CRUSHED UNOXIDIZED ORE BIN, AND UPPER PORTION OF THE STEPHENS-ADAMSON 25 TON/HR BUCKET ELEVATOR. THE UPPER TAILINGS POND LIES BEYOND THE MILL WITH THE UPPER TAILINGS DAM UNDER THE GRAVEL ROAD IN THE UPPER RIGHT CORNER. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Crytometia Does Not Survive in the Upper Coastal Plain of Georgia

Treesearch

Timothy La Farge

1980-01-01

Nine seed sources of Ctyptomeriojaponicafrom the northern portion of its range in Japan were tested in the Upper Coastal Plain of central Georgia. Although these sources varied significantly in their rates of growth in the nursery, only 3 of 180 trees survived after 5 years in the field.

A Submersed Macrophyte Index of Condition for the Upper Mississippi River

EPA Science Inventory

Portions of the Upper Mississippi River are listed as impaired for aquatic life use under section 303(d) of the United States Clean Water Act by the State of Minnesota’s Pollution Control Agency and Wisconsin’s Department of Natural Resources for exceeding turbidity and eutrophic...

Bathymetric Survey and Storage Capacity of Upper Lake Mary near Flagstaff, Arizona

USGS Publications Warehouse

Hornewer, Nancy J.; Flynn, Marilyn E.

2008-01-01

Upper Lake Mary is a preferred drinking-water source for the City of Flagstaff, Arizona. Therefore, storage capacity and sedimentation issues in Upper Lake Mary are of interest to the City. The U.S. Geological Survey, in cooperation with the City of Flagstaff, collected bathymetric and land-survey data in Upper Lake Mary during late August through October 2006. Water-depth data were collected using a single-beam, high-definition fathometer. Position data were collected using real-time differential global position system receivers. Data were processed using commercial software and imported into geographic information system software to produce contour maps of lakebed elevations and for the computation of area and storage-capacity information. At full pool (spillway elevation of 6,828.5 feet above mean sea level), Upper Lake Mary has a storage capacity of 16,300 acre-feet, a surface area of 939 acres, a mean depth of 17.4 feet, and a depth near the dam of 39 feet. It is 5.6 miles long and varies in width from 308 feet near the central, narrow portion of the lake to 2,630 feet in the upper portion. Comparisons between this survey and a previous survey conducted in the 1950s indicate no apparent decrease in reservoir area or storage capacity between the two surveys.

Implications of observed and simulated ambient flow in monitoring wells.

PubMed

Elci, B A; Molz, F J; Waldrop, W R

2001-01-01

A recent paper by Hutchins and Acree (2000) has called attention to ground water sampling bias due to ambient (natural gradient-induced) flows in monitoring wells. Data collected with borehole flowmeters have shown that such ambient flows are ubiquitous in both confined and unconfined aquifers. Developed herein is a detailed three-dimensional model of flow and transport in the vicinity of a fully penetrating monitoring well. The model was used to simulate a measured ambient flow distribution around a test well in a heterogeneous aquifer at the Savannah River Site (SRS) near Aiken, South Carolina. Simulated ambient flows agreed well with measurements. Natural flow was upward, so water entered the well mainly through high K layers in the lower portion of the aquifer and exited through similar layers in the upper portion. The maximum upward discharge in the well was about 0.28 L/min, which implied an induced exchange of 12 m3/month from the bottom half of the aquifer to the upper half. Tracer transport simulations then illustrated how a contaminant located initially in a lower portion of the aquifer was continuously transported into the upper portion and diluted throughout the entire well by in-flowing water. Even after full purging or micropurging, samples from such a well will yield misleading and ambiguous data concerning solute concentrations, location of a contaminant source, and plume geometry. For all of these reasons, use of long-screened monitoring wells should be phased out, unless an appropriate multilevel sampling device prevents vertical flow.

Environmental Assessment for the Expansion of the Yukon Measurement and Debriefing System in the Fox and Yukon MOAs

DTIC Science & Technology

2006-05-01

River, Porcupine River, Chandalar River, and the upper portion of the Yukon River. The southern portion of the area is drained by the Fortymile River...physiographic features in the central 17 EA for Expansion of YMDS April2006 portion are the Porcupine Plateau and the Yukon Flats. The Yukon Flats...mile. The Fortymile caribou herd utilizes the surrounding area as its principle winter range. Since 1995, the Fortymile caribou herd has increased

Initial experience with purely laparoscopic living-donor right hepatectomy.

PubMed

Hong, S K; Lee, K W; Choi, Y; Kim, H S; Ahn, S W; Yoon, K C; Kim, H; Yi, N J; Suh, K S

2018-05-01

There may be concerns about purely laparoscopic donor right hepatectomy (PLDRH) compared with open donor right hepatectomy, especially when performed by surgeons accustomed to open surgery. This study aimed to describe technical tips and pitfalls in PLDRH. Data from donors who underwent PLDRH at Seoul National University Hospital between December 2015 and July 2017 were analysed retrospectively. Endpoints analysed included intraoperative events and postoperative complications. All operations were performed by a single surgeon with considerable experience in open living donor hepatectomy. A total of 26 donors underwent purely laparoscopic right hepatectomy in the study interval. No donor required transfusion during surgery, whereas two underwent reoperation. In two donors, the dissection plane at the right upper deep portion of the midplane was not correct. One donor experienced portal vein injury during caudate lobe transection, and one developed remnant left hepatic duct stenosis. One donor experienced remnant portal vein angulation owing to a different approach angle, and one experienced arterial damage associated with the use of a laparoscopic energy device. One donor had postoperative bleeding due to masking of potential bleeding foci owing to intra-abdominal pressure during laparoscopy. Two donors experienced right liver surface damage caused by a xiphoid trocar. Purely laparoscopic donor hepatectomy differs from open donor hepatectomy in terms of angle and caudal view. Therefore, surgeons experienced in open donor hepatectomy must gain adequate experience in laparoscopic liver surgery and make adjustments when performing PLDRH. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Aerosol can waste disposal device

DOEpatents

O'Brien, Michael D.; Klapperick, Robert L.; Bell, Chris

1993-01-01

Disclosed is a device for removing gases and liquid from containers. The ice punctures the bottom of a container for purposes of exhausting gases and liquid from the container without their escaping into the atmosphere. The device includes an inner cup or cylinder having a top portion with an open end for receiving a container and a bottom portion which may be fastened to a disposal or waste container in a substantially leak-proof manner. A piercing device is mounted in the lower portion of the inner cylinder for puncturing the can bottom placed in the inner cylinder. An outer cylinder having an open end and a closed end fits over the top portion of the inner cylinder in telescoping engagement. A force exerted on the closed end of the outer cylinder urges the bottom of a can in the inner cylinder into engagement with the piercing device in the bottom of the inner cylinder to form an opening in the can bottom, thereby permitting the contents of the can to enter the disposal container.

Aerosol can waste disposal device

DOEpatents

O'Brien, M.D.; Klapperick, R.L.; Bell, C.

1993-12-21

Disclosed is a device for removing gases and liquid from containers. The device punctures the bottom of a container for purposes of exhausting gases and liquid from the container without their escaping into the atmosphere. The device includes an inner cup or cylinder having a top portion with an open end for receiving a container and a bottom portion which may be fastened to a disposal or waste container in a substantially leak-proof manner. A piercing device is mounted in the lower portion of the inner cylinder for puncturing the can bottom placed in the inner cylinder. An outer cylinder having an open end and a closed end fits over the top portion of the inner cylinder in telescoping engagement. A force exerted on the closed end of the outer cylinder urges the bottom of a can in the inner cylinder into engagement with the piercing device in the bottom of the inner cylinder to form an opening in the can bottom, thereby permitting the contents of the can to enter the disposal container. 7 figures.

Angle stations in or for endless conveyor belts

DOEpatents

Steel, Alan

1987-04-07

In an angle station for an endless conveyor belt, there are presented to each incoming run of the belt stationary curved guide members (18, 19) of the shape of a major segment of a right-circular cylinder and having in the part-cylindrical portion (16 or 17) thereof rectangular openings (15) arranged in parallel and helical paths and through which project small freely-rotatable rollers (14), the continuously-changing segments of the curved surfaces of which projecting through said openings (15) are in attitude to change the direction of travel of the belt (13) through 90.degree. during passage of the belt about the part-cylindrical portion (16 or 17) of the guide member (18 or 19). The rectangular openings (15) are arranged with their longer edges lengthwise of the diagonals representing the mean of the helix but with those of a plurality of the rows nearest to each end of the part-cylindrical portion (16 or 17) slightly out of axial symmetry with said diagonals, being slightly inclined in a direction about the intersections (40) of the diagonals of the main portion of the openings, to provide a "toe-in" attitude in relation to the line of run of the endless conveyor belt.

9. John and James Dobson Carpet Mill, portion of West ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. John and James Dobson Carpet Mill, portion of West parcel, site plan-left, elevation-upper right, and survey-lower right, 1873. Hexamer, Ernest and Son. Hexamer General Surveys 1867-1895, Philadelphia, Pennsylvania: E. Hexamer and Son, 1873, pp. 670-671. - John & James Dobson Carpet Mill (West Parcel), 4041-4055 Ridge Avenue, Philadelphia, Philadelphia County, PA

Guying to prevent wind sway influences loblolly pine growth and wood properties

Treesearch

James D. Burton; Diana M. Smith

1972-01-01

Restraining young loblolly pine (Pinus taeda L.) trees from normal swaying in the wind markedly reduced radial growth in the immobilized portion of the bole and accelerated it in the upper, free-swaying portion. Guying also reduced specific gravity, number of earlywood and latewood tracheids, latewood tracheid diameter, and amount of compression wood...

75 FR 19277 - PLMR Licensing; Frequency Coordination and Eligibility Issues

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... band (1427-1429.5 MHz), and non-medical telemetry in the upper half of the band (1429.5-1432 MHz). Non... secondary basis on those portions of the 1427-1432 MHz shared band where non-medical telemetry is primary...-medical telemetry has primary status. Some WMTS operations in the portions of the 1427-1432 MHz band where...

12 CFR 912.4 - Closed meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... meetings. (a) The Board of Directors may close a meeting, or portion thereof, to public observation, or withhold information from the public pertaining to a meeting, when it determines that opening the meeting, or a portion thereof, or the public disclosure of information pertaining to such meeting, or portion...

Geomorphic and Aqueous Chemistry of a Portion of the Upper Rio Tinto System, Spain

NASA Technical Reports Server (NTRS)

Osburn, M. R.; Fernandez-Remolar, D. C.; Arvidson, R. E.; Morris, R. V.; Ming, D.; Prieto-Ballesteros, O.; Amils, R.; Stein, T. C.; Heil-Chapdelaine, V.; Friedlander, L. R.;

Modeling of transient heat pipe operation

NASA Technical Reports Server (NTRS)

Colwell, Gene T.

1987-01-01

The use of heat pipes is being considered as a means of reducing the peak temperature and large thermal gradients at the leading edges of reentry vehicles and hypersonic aircraft and in nuclear reactors. In the basic cooling concept, the heat pipe covers the leading edge, a portion of the lower wing surface, and a portion of the upper wing surface. Aerodynamic heat is mainly absorbed at the leading edge and transported through the heat pipe to the upper and lower wing surface, where it is rejected by thermal radiation and convection. Basic governing equations are written to determine the startup, transient, and steady state performance of a haet pipe which has initially frozen alkali-metal as the working fluid.

In situ oil shale retort with a generally T-shaped vertical cross section

DOEpatents

Ricketts, Thomas E.

1981-01-01

An in situ oil shale retort is formed in a subterranean formation containing oil shale. The retort contains a fragmented permeable mass of formation particles containing oil shale and has a production level drift in communication with a lower portion of the fragmented mass for withdrawing liquid and gaseous products of retorting during retorting of oil shale in the fragmented mass. The principal portion of the fragmented mass is spaced vertically above a lower production level portion having a generally T-shaped vertical cross section. The lower portion of the fragmented mass has a horizontal cross sectional area smaller than the horizontal cross sectional area of the upper principal portion of the fragmented mass above the production level.

A study comparing ultrasound images of tongue movements between open bite children and normal children in the early mixed dentition period.

PubMed

Kikyo, T; Saito, M; Ishikawa, M

1999-09-01

The tongue surface movement of young patients with or without open bite was evaluated by ultrasound images taken on the posterior part of the tongue on the frontal plane to determine whether there is any relationship between the tongue movement and open bite malocclusion in the early mixed dentition period. The standardized reproducible ultrasound images were obtained using ultrasound diagnostic equipment that was fabricated in a cephalostat unit having a probe stabilizer. At the central portion of the tongue, no significant differences were detected in the duration or the momentum of tongue surface movement on a frontal plane was detected between the patients with and without open bite during swallowing. The farther the region was from the central portion, however, the longer the duration and the bigger the momentum of the tongue surface movement was found in the open bite group. Based on this evidence, it is suggested that an open-bite child swallows by using a tongue thrust motion that forms using a large depressed area in the tongue, whereas a normal child without tongue thrust forms a rather narrow groove in the central portion of the tongue when swallowing.

41. VIEW NORTH OF UPPER LEVEL OF CRUSHER ADDITION. DINGS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

41. VIEW NORTH OF UPPER LEVEL OF CRUSHER ADDITION. DINGS MAGNETIC PULLEY AT CENTER. ALSO SHOWS 100-TON CRUSHED UNOXIDIZED ORE BIN (RIGHT), PULLEY FORM 18 INCH BELT CONVEYOR CRUSHED OXIDIZED ORE BIN FEED AND STEPHENSADAMSON 25 TON/HR BUCKET ELEVATOR (UPPER CENTER). THE UPPER PORTION OF THE SAMPLING ELEVATOR IS ABOVE THE MAGNETIC PULLEY (CENTER LEFT) WITH THE ROUTE OF THE 16 INCH BELT CONVEYOR FINES FEED TO CRUSHED OXIDIZED ORE BIN TO ITS LEFT. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

System of treating flue gas

DOEpatents

Ziegler, D.L.

1975-12-01

A system is described for treating or cleaning incinerator flue gas containing acid gases and radioactive and fissionable contaminants. Flue gas and a quench solution are fed into a venturi and then tangentially into the lower portion of a receptacle for restricting volumetric content of the solution. The upper portion of the receptacle contains a scrub bed to further treat or clean the flue gas.

Apparatus for insulating windows and the like

DOEpatents

Mitchell, R.A.

1984-06-19

Apparatus for insulating window openings through walls and the like includes a thermal shutter, a rail for mounting the shutter adjacent to the window opening and a coupling for connecting the shutter to the rail. The thermal shutter includes an insulated panel adhered to frame members which surround the periphery of the panel. The frame members include a hard portion for providing the frame and a soft portion for providing a seal with that portion of the wall adjacent to the periphery of the opening. The coupling means is preferably integral with the attachment rail. According to a preferred embodiment, the coupling means includes a continuous hinge of reduced thickness. The thermal shutter can be permanently attached, hinged, bi-folded, or sliding with respect to the window and wall. A distribution method is to market the apparatus in kit'' form. 11 figs.

Growth and transfer of monolithic horizontal nanowire superstructures onto flexible substrates

DOEpatents

Wang, Zhong L; Xu, Sheng

2013-08-27

In a method of making a monolithic elongated nanowire, a mask polymer layer is applied to a selected crystal surface of a seed crystal. A plurality of spaced apart elongated openings is defined through the mask polymer layer, thereby exposing a corresponding plurality of portions of the crystal surface. The openings are disposed so as to be aligned with and parallel to a selected crystal axis of the seed crystal. The portions of the crystal surface are subjected to a chemical nutrient environment that causes crystalline material to grow from the plurality of portions for at least a period of time so that monocrystalline members grow from the elongated openings and until the monocrystalline members laterally expand so that each monocrystalline member grows into and merges with an adjacent one of the monocrystalline members, thereby forming a monolithic elongated nanowire.

Heat exchanger and related methods

DOEpatents

Turner, Terry D.; McKellar, Michael G.

2015-12-22

Heat exchangers include a housing having an inlet and an outlet and forming a portion of a transition chamber. A heating member may form another portion of the transition chamber. The heating member includes a first end having a first opening and a second end having a second opening larger than the first opening. Methods of conveying a fluid include supplying a first fluid into a transition chamber of a heat exchanger, supplying a second fluid into the transition chamber, and altering a state of a portion of the first fluid with the second fluid. Methods of sublimating solid particles include conveying a first fluid comprising a material in a solid state into a transition chamber, heating the material to a gaseous state by directing a second fluid through a heating member and mixing the first fluid and the second fluid.

Apparatus for insulating windows and the like

DOEpatents

Mitchell, Robert A.

1984-01-01

Apparatus for insulating window openings through walls and the like includes a thermal shutter, a rail for mounting the shutter adjacent to the window opening and a coupling for connecting the shutter to the rail. The thermal shutter includes an insulated panel adhered to frame members which surround the periphery of the panel. The frame members include a hard portion for providing the frame and a soft portion for providing a seal with that portion of the wall adjacent to the periphery of the opening. The coupling means is preferably integral with the attachment rail. According to a preferred embodiment, the coupling means includes a continuous hinge of reduced thickness. The thermal shutter can be permanently attached, hinged, bi-folded, or sliding with respect to the window and wall. A distribution method is to market the apparatus in "kit" form.

Crustal structure and tectonic deformation of the southern Ecuadorian margin

NASA Astrophysics Data System (ADS)

Calahorrano, Alcinoe; Collot, Jean-Yves; Sage, Françoise; Ranero, César R.

2010-05-01

Multichannel seismic lines acquired during the SISTEUR cruise (2000) provide new constraints on the structure and deformation of the subduction zone at the southern Ecuadorian margin, from the deformation front to the continental shelf of the Gulf of Guayaquil. The pre-stack depth migrated images allows to characterise the main structures of the downgoing and overriding plates and to map the margin stratigraphy in order to propose a chronology of the deformation, by means of integrating commercial well data and industry seismic lines located in the gulf area. The 100-km-long seismic lines show the oceanic Nazca plate underthrusting the South American plate, as well as the subduction channel and inter-plate contact from the deformation front to about 90 km landward and ~20 km depth. Based on seismic structure we identify four upper-plate units, consisting of basement and overlaying sedimentary sequences A, B and C. The sedimentary cover varies along the margin, being few hundreds of meters thick in the lower and middle slope, and ~2-3 km thick in the upper slope. Exceptionally, a ~10-km -thick basin, here named Banco Peru basin, is located on the upper slope at the southernmost part of the gulf. This basin seems to be the first evidence of the Gulf of Guayaquil opening resulting from the NE escaping of the North Andean Block. Below the continental shelf, thick sedimentary basins of ~6 to 8 km occupy most of the gulf area. Tectonic deformation across most of the upper-plate is dominated by extensional regime, locally disturbed by diapirism. Compression evidences are restricted to the deformation front and surrounding areas. Well data calibrating the seismic profiles indicate that an important portion of the total thickness of the sedimentary coverage of the overriding plate are Miocene or older. The data indicate the extensional deformation resulting from the NE motion of the North Andean Block and the opening of the Gulf of Guayaquil, evolves progressively in age from the southern edge of the gulf near Banco Peru, where main subsidence seems to be Miocene or older, toward the northern limit, where high subsidence rates are early Pleistocene.

Connecting apparatus for limited rotary of rectilinear motion (II)

DOEpatents

Hardin, Jr., Roy T.; Kurinko, Carl D.

1981-01-01

Apparatus for providing connection between two members having relative movement in a horizontal plane in a rotary or linear fashion. The apparatus includes a set of vertical surfaces affixed to each of the members, laterally aligned across a selected vertical gap. A number of cables or hoses, for electrical, hydraulic, or pneumatic connection are arranged between consecutive surfaces in a C-shaped traveling loop, connected through their end portions to the two respective members, so that through a sliding motion portions of the cable are transferred from between one set of surfaces to the other aligned set, across the gap, upon relative motion of the members. A number of flexible devices are affixed to the upper set of surfaces for supporting the upper portion of each looped cable. The apparatus is particularly adaptable to an area having limited lateral clearances and requiring signal level separation between electrical cables, such as found in the rotating plugs and associated equipment of the reactor vessel head of a nuclear reactor.

Anode shroud for off-gas capture and removal from electrolytic oxide reduction system

DOEpatents

Bailey, James L.; Barnes, Laurel A.; Wiedmeyer, Stanley G.; Williamson, Mark A.; Willit, James L.

2014-07-08

An electrolytic oxide reduction system according to a non-limiting embodiment of the present invention may include a plurality of anode assemblies and an anode shroud for each of the anode assemblies. The anode shroud may be used to dilute, cool, and/or remove off-gas from the electrolytic oxide reduction system. The anode shroud may include a body portion having a tapered upper section that includes an apex. The body portion may have an inner wall that defines an off-gas collection cavity. A chimney structure may extend from the apex of the upper section and be connected to the off-gas collection cavity of the body portion. The chimney structure may include an inner tube within an outer tube. Accordingly, a sweep gas/cooling gas may be supplied down the annular space between the inner and outer tubes, while the off-gas may be removed through an exit path defined by the inner tube.

Femtosecond laser-induced formation of submicrometer spikes on a semiconductor substrate

DOEpatents

Mazur, Eric [Concord, MA; Shen, Mengyan [Arlington, MA

2008-10-28

The present invention generally provides semiconductor substrates having submicron-sized surface features generated by irradiating the surface with ultra short laser pulses. In one aspect, a method of processing a semiconductor substrate is disclosed that includes placing at least a portion of a surface of the substrate in contact with a fluid, and exposing that surface portion to one or more femtosecond pulses so as to modify the topography of that portion. The modification can include, e.g., generating a plurality of submicron-sized spikes in an upper layer of the surface.

Femtosecond laser-induced formation of submicrometer spikes on a semiconductor substrate

DOEpatents

Mazur, Eric; Shen, Mengyan

2015-09-15

The present invention generally provides semiconductor substrates having submicronsized surface features generated by irradiating the surface with ultra short laser pulses. In one aspect, a method of processing a semiconductor substrate is disclosed that includes placing at least a portion of a surface of the substrate in contact with a fluid, and exposing that surface portion to one or more femtosecond pulses so as to modify the topography of that portion. The modification can include, e.g., generating a plurality of submicron-sized spikes in an upper layer of the surface.

Femtosecond laser-induced formation of submicrometer spikes on a semiconductor substrate

DOEpatents

Mazur, Eric , Shen; Mengyan, [Belmont, MA

2011-02-08

The present invention generally provides semiconductor substrates having submicron-sized surface features generated by irradiating the surface with ultra short laser pulses. In one aspect, a method of processing a semiconductor substrate is disclosed that includes placing at least a portion of a surface of the substrate in contact with a fluid, and exposing that surface portion to one or more femtosecond pulses so as to modify the topography of that portion. The modification can include, e.g., generating a plurality of submicron-sized spikes in an upper layer of the surface.

76 FR 24923 - National Science Board; Sunshine Act Meetings; Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

...: Some portions open, some portions closed. UPDATES: Please refer to the National Science Board Web site... Information Item: Status Deep Underground Science and Engineering Laboratory Information Item: High...

Percussive arc welding apparatus

DOEpatents

Hollar, Jr., Donald L.

2002-01-01

A percussive arc welding apparatus includes a generally cylindrical actuator body having front and rear end portions and defining an internal recess. The front end of the body includes an opening. A solenoid assembly is provided in the rear end portion in the internal recess of the body, and an actuator shaft assembly is provided in the front end portion in the internal recess of the actuator body. The actuator shaft assembly includes a generally cylindrical actuator block having first and second end portions, and an actuator shaft having a front end extending through the opening in the actuator body, and the rear end connected to the first end portion of the actuator block. The second end portion of the actuator block is in operational engagement with the solenoid shaft by a non-rigid connection to reduce the adverse rebound effects of the actuator shaft. A generally transversely extending pin is rigidly secured to the rear end of the shaft. One end of the pin is received in a slot in the nose housing sleeve to prevent rotation of the actuator shaft during operation of the apparatus.

Wireless Open-Circuit In-Plane Strain and Displacement Sensor Requiring No Electrical Connections

NASA Technical Reports Server (NTRS)

Woodard, Stanley E. (Inventor)

2014-01-01

A wireless in-plane strain and displacement sensor includes an electrical conductor fixedly coupled to a substrate subject to strain conditions. The electrical conductor is shaped between its ends for storage of an electric field and a magnetic field, and remains electrically unconnected to define an unconnected open-circuit having inductance and capacitance. In the presence of a time-varying magnetic field, the electrical conductor so-shaped resonates to generate harmonic electric and magnetic field responses. The sensor also includes at least one electrically unconnected electrode having an end and a free portion extending from the end thereof. The end of each electrode is fixedly coupled to the substrate and the free portion thereof remains unencumbered and spaced apart from a portion of the electrical conductor so-shaped. More specifically, at least some of the free portion is disposed at a location lying within the magnetic field response generated by the electrical conductor. A motion guidance structure is slidingly engaged with each electrode's free portion in order to maintain each free portion parallel to the electrical conductor so-shaped.

40 CFR 52.273 - Open burning.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 3 2011-07-01 2011-07-01 false Open burning. 52.273 Section 52.273... PROMULGATION OF IMPLEMENTATION PLANS California § 52.273 Open burning. (a) The following rules or portions of rules are disapproved because they contain exemptions to open burning (including open agricultural...

40 CFR 52.273 - Open burning.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 3 2014-07-01 2014-07-01 false Open burning. 52.273 Section 52.273... PROMULGATION OF IMPLEMENTATION PLANS California § 52.273 Open burning. (a) The following rules or portions of rules are disapproved because they contain exemptions to open burning (including open agricultural...

40 CFR 52.273 - Open burning.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 3 2012-07-01 2012-07-01 false Open burning. 52.273 Section 52.273... PROMULGATION OF IMPLEMENTATION PLANS California § 52.273 Open burning. (a) The following rules or portions of rules are disapproved because they contain exemptions to open burning (including open agricultural...

40 CFR 52.273 - Open burning.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 3 2013-07-01 2013-07-01 false Open burning. 52.273 Section 52.273... PROMULGATION OF IMPLEMENTATION PLANS California § 52.273 Open burning. (a) The following rules or portions of rules are disapproved because they contain exemptions to open burning (including open agricultural...

40 CFR 52.273 - Open burning.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Open burning. 52.273 Section 52.273... PROMULGATION OF IMPLEMENTATION PLANS California § 52.273 Open burning. (a) The following rules or portions of rules are disapproved because they contain exemptions to open burning (including open agricultural...

System and method for multi-stage bypass, low operating temperature suppressor for automatic weapons

DOEpatents

Moss, William C.; Anderson, Andrew T.

2015-06-09

The present disclosure relates to a suppressor for use with a weapon. The suppressor may be formed to have a body portion having a bore extending concentric with a bore axis of the weapon barrel. An opening in the bore extends at least substantially circumferentially around the bore. A flow path communicates with the opening and defines a channel for redirecting gasses flowing in the bore out from the bore, through the opening, into a rearward direction in the flow path. The flow path raises a pressure at the opening to generate a Mach disk within the bore at a location approximately coincident with the opening. The Mach disk forms as a virtual baffle to divert at least a portion of the gasses into the opening and into the flow path.

Solar Cell Modules With Improved Backskin

DOEpatents

Chevrefils, Andre; Grigore, Daniel Gheorghe

2001-01-23

The present invention relates to gas turbines and more particularly to a device for controlling the flow of cooling air through a flowpath in a turbine blade. The device can be inserted in the inlet opening of the blade flowpath and be retained therein. The device comprises a plug member for adjusting the flow of cooling air through the flowpath. The plug member comprises a retaining portion for retaining the plug member at the inlet opening of the flowpath and a blocking portion inserted within the flowpath for reducing the cross-sectional area of the inlet opening. Such a device is inexpensive and can be easily inserted in the inlet opening of a blade flowpath and retained therein.

Energy efficient skylight construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jentoft, A.P.; Couture, P.A.

1978-02-14

An energy efficient skylight construction is described. A skylight cover is secured by a frame to a curbing comprised of an insulating core, the interior and exterior surfaces of which are covered by non-combustible shields separated along the upper and lower surfaces of the curbing by a gap which serves as a ''thermal break'' between the highly conductive inner and outer shields. The frame is pierced by drain openings the exterior of which are covered by a filter type material such as foam or glass fibers that is both absorbtive of moisture and resistant to the passage of air. Themore » frame is secured to the outward portion of the curbing and includes a flange extending inward across the gap between the shields, which serves as a gutter to collect condensation which drips off the glazing. The inward portion of the flange is covered with an insulating gasket which prevents condensation from forming on the flange and which prevents the warmer, more moisture laden, inside air from reaching the cold underside of the gutter flange or the edge of the outerskin. The core insulation is inserted, without adhesives, into the assembled inside skin, and then the exposed surface of the insulation is bonded to the inside surface of the outer skin.« less

Spray shadowing for stress relief and mechanical locking in thick protective coatings

DOEpatents

Hollis, Kendall [Los Alamos, NM; Bartram, Brian [Los Alamos, NM

2007-05-22

A method for applying a protective coating on an article, comprising the following steps: selecting an article with a surface for applying a coating thickness; creating undercut grooves on the article, where the grooves depend beneath the surface to a bottom portion with the grooves having an upper width on the surface and a lower width on the bottom portion connected by side walls, where at least one of the side walls connects the upper width and the lower width to form an undercut angle with the surface less than 90.degree.; and, applying the protective coating onto the article to fill the undercut grooves and cover the surface, thereby forming weak paths within the protective coating.

Frame-mounted wire management device

DOEpatents

Grushkowitz, Tyler; Fischer, Kevin; Danning, Matthew

2016-09-20

A wire management device is disclosed. The device comprises a clip comprising an upper planar member and a lower planar member, each planar member having an inner and outer surface, wherein the inner surface of the upper planar member includes a post extending toward the inner surface of the lower planar member, a stem extending from the outer surface of the lower planar member, the stem including two outwardly-extending flanges, each of the first and second outwardly-extending flanges including an edge portion extending toward the outer surface of the lower planar member, and a transverse passage extending along the outer surface of the lower planar member, the transverse passage extending across the stem, wherein the stem has a recessed portion along the transverse passage.

Effect of Full-Chord Porosity on Aerodynamic Characteristics of the NACA 0012 Airfoil

NASA Technical Reports Server (NTRS)

Mineck, Raymond E.; Hartwich, Peter M.

1996-01-01

A test was conducted on a model of the NACA 0012 airfoil section with a solid upper surface or a porous upper surface with a cavity beneath for passive venting. The purposes of the test were to investigate the aerodynamic characteristics of an airfoil with full-chord porosity and to assess the ability of porosity to provide a multipoint or self-adaptive design. The tests were conducted in the Langley 8-Foot Transonic Pressure Tunnel over a Mach number range from 0.50 to 0.82 at chord Reynolds numbers of 2 x 10(exp 6), 4 x 10(exp 6), and 6 x 10(exp 6). The angle of attack was varied from -1 deg to 6 deg. At the lower Mach numbers, porosity leads to a dependence of the drag on the normal force. At subcritical conditions, porosity tends to flatten the pressure distribution, which reduces the suction peak near the leading edge and increases the suction over the middle of the chord. At supercritical conditions, the compression region on the porous upper surface is spread over a longer portion of the chord. In all cases, the pressure coefficient in the cavity beneath the porous surface is fairly constant with a very small increase over the rear portion. For the porous upper surface, the trailing edge pressure coefficients exhibit a creep at the lower section normal force coefficients, which suggests that the boundary layer on the rear portion of the airfoil is significantly thickening with increasing normal force coefficient.

Insulated conductor temperature limited heater for subsurface heating coupled in a three-phase WYE configuration

DOEpatents

Vinegar, Harold J.; Sandberg, Chester Ledlie

2010-11-09

A heating system for a subsurface formation is described. The heating system includes a first heater, a second heater, and a third heater placed in an opening in the subsurface formation. Each heater includes: an electrical conductor; an insulation layer at least partially surrounding the electrical conductor; and an electrically conductive sheath at least partially surrounding the insulation layer. The electrical conductor is electrically coupled to the sheath at a lower end portion of the heater. The lower end portion is the portion of the heater distal from a surface of the opening. The first heater, the second heater, and the third heater are electrically coupled at the lower end portions of the heaters. The first heater, the second heater, and the third heater are configured to be electrically coupled in a three-phase wye configuration.

Multi-tube thermal fuse for nozzle protection from a flame holding or flashback event

DOEpatents

Lacy, Benjamin Paul; Davis, Jr., Lewis Berkley; Johnson, Thomas Edward; York, William David

2012-07-03

A protection system for a pre-mixing apparatus for a turbine engine, includes: a main body having an inlet portion, an outlet portion and an exterior wall that collectively establish a fuel delivery plenum; and a plurality of fuel mixing tubes that extend through at least a portion of the fuel delivery plenum, each of the plurality of fuel mixing tubes including at least one fuel feed opening fluidly connected to the fuel delivery plenum; at least one thermal fuse disposed on an exterior surface of at least one tube, the at least one thermal fuse including a material that will melt upon ignition of fuel within the at least one tube and cause a diversion of fuel from the fuel feed opening to at least one bypass opening. A method and a turbine engine in accordance with the protection system are also provided.

NUCLEAR SUPERHEATER FOR BOILING WATER REACTOR

DOEpatents

Holl, R.J.; Klecker, R.W.; Graham, C.B.

1962-05-15

A description is given of a boiling water reactor having a superheating region integral with the core. The core consists essentially of an annular boiling region surrounding an inner superheating region. Both regions contain fuel elements and are separated by a cylindrical wall, perforations being provided in the lower portion of the cylindrical wall to permit circulation of a common water moderator between the two regions. The superheater region comprises a plurality of tubular fuel assemblies through which the steam emanating from the boiling region passes to the steam outlet. Each superheater fuel assembly has an outer double-walled cylinder, the double walls being concentrically spaced and connected together at their upper ends but open at the bottom to provide for differential thermal expansion of the inner and outer walls. Gas is entrapped in the annulus between the walls which acts as an insulating space between the fissionable material inside and the moderator outside. (AEC)

[Application of a mathematical algorithm for the detection of electroneuromyographic results in the pathogenesis study of facial dyskinesia].

PubMed

Gribova, N P; Iudel'son, Ia B; Golubev, V L; Abramenkova, I V

2003-01-01

To carry out a differential diagnosis of two facial dyskinesia (FD) models--facial hemispasm (FH) and facial paraspasm (FP), a combined program of electroneuromyographic (ENMG) examination has been created, using statistical analyses, including that for objects identification based on hybrid neural network with the application of adaptive fuzzy logic method and standard statistics programs (Wilcoxon, Student statistics). In FH, a lesion of peripheral facial neuromotor apparatus with augmentation of functions of inter-neurons in segmental and upper segmental stem levels predominated. In FP, primary afferent strengthening in mimic muscles was accompanied by increased motor neurons activity and reciprocal augmentation of inter-neurons, inhibiting motor portion of V pair. Mathematical algorithm for ENMG results recognition worked out in the study provides a precise differentiation of two FD models and opens possibilities for differential diagnosis of other facial motor disorders.

Animal Exposure During Burn Tests

NASA Technical Reports Server (NTRS)

Gaume, J. G.

1978-01-01

An animal exposure test system (AETS) was designed and fabricated for the purpose of collecting physiological and environmental (temperature) data from animal subjects exposed to combustion gases in large scale fire tests. The AETS consisted of an open wire mesh, two-compartment cage, one containing an exercise wheel for small rodents, and the other containing one rat instrumented externally for electrocardiogram (ECG) and respiration. Cage temperature is measured by a thermistor located in the upper portion of the rat compartment. Animal activity is monitored by the ECG and the records indicate an increase in EMG (electromyograph) noise super-imposed by the increased activity of the torso musculature. Examples of the recordings are presented and discussed as to their significance regarding toxicity of fire gases and specific events occurring during the test. The AETS was shown to be a useful tool in screening materials for the relative toxicity of their outgassing products during pyrolysis and combustion.

Method and device for tensile testing of cable bundles

DOEpatents

Robertson, Lawrence M; Ardelean, Emil V; Goodding, James C; Babuska, Vit

2012-10-16

A standard tensile test device is improved to accurately measure the mechanical properties of stranded cables, ropes, and other composite structures wherein a witness is attached to the top and bottom mounting blocks holding the cable under test. The witness is comprised of two parts: a top and a bottom rod of similar diameter with the bottom rod having a smaller diameter stem on its upper end and the top rod having a hollow opening in its lower end into which the stem fits forming a witness joint. A small gap is present between the top rod and the larger diameter portion of the bottom rod. A standard extensometer is attached to the top and bottom rods of the witness spanning this small witness gap. When a force is applied to separate the mounting blocks, the gap in the witness expands the same length that the entire test specimen is stretched.

29 CFR 1612.7 - Public announcement of agency meetings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the first meeting in a series of meetings, except as otherwise provided in this section, and shall disclose: (1) The time of the meeting. (2) The place of the meeting. (3) The subject matter of each portion of the meeting or series of meetings. (4) Whether any portion(s) of a meeting will be open or closed...

47 CFR 0.602 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Open meetings. 0.602 Section 0.602 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMISSION ORGANIZATION Meeting Procedures § 0.602 Open... as provided in § 0.603, every portion of every meeting shall be open to public observation...

47 CFR 0.602 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false Open meetings. 0.602 Section 0.602 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMISSION ORGANIZATION Meeting Procedures § 0.602 Open... as provided in § 0.603, every portion of every meeting shall be open to public observation...

40 CFR 1603.4 - Open meetings requirement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Open meetings requirement. 1603.4... THE GOVERNMENT IN THE SUNSHINE ACT § 1603.4 Open meetings requirement. Any meetings of the Board, as... Board's meetings, or portions thereof, shall be open to public observation. ...

40 CFR 1603.4 - Open meetings requirement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Open meetings requirement. 1603.4... THE GOVERNMENT IN THE SUNSHINE ACT § 1603.4 Open meetings requirement. Any meetings of the Board, as... Board's meetings, or portions thereof, shall be open to public observation. ...

40 CFR 1603.4 - Open meetings requirement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Open meetings requirement. 1603.4... THE GOVERNMENT IN THE SUNSHINE ACT § 1603.4 Open meetings requirement. Any meetings of the Board, as... Board's meetings, or portions thereof, shall be open to public observation. ...

47 CFR 0.602 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 1 2013-10-01 2013-10-01 false Open meetings. 0.602 Section 0.602 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMISSION ORGANIZATION Meeting Procedures § 0.602 Open... as provided in § 0.603, every portion of every meeting shall be open to public observation...

47 CFR 0.602 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Open meetings. 0.602 Section 0.602 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMISSION ORGANIZATION Meeting Procedures § 0.602 Open... as provided in § 0.603, every portion of every meeting shall be open to public observation...

40 CFR 1603.4 - Open meetings requirement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Open meetings requirement. 1603.4... THE GOVERNMENT IN THE SUNSHINE ACT § 1603.4 Open meetings requirement. Any meetings of the Board, as... Board's meetings, or portions thereof, shall be open to public observation. ...

47 CFR 0.602 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Open meetings. 0.602 Section 0.602 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMISSION ORGANIZATION Meeting Procedures § 0.602 Open... as provided in § 0.603, every portion of every meeting shall be open to public observation...

40 CFR 1603.4 - Open meetings requirement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Open meetings requirement. 1603.4... THE GOVERNMENT IN THE SUNSHINE ACT § 1603.4 Open meetings requirement. Any meetings of the Board, as... Board's meetings, or portions thereof, shall be open to public observation. ...

Phosphorus losses from an irrigated watershed in the Northwestern U.S.: Case study of the Upper Snake Rock Watershed

USDA-ARS?s Scientific Manuscript database

Watersheds utilizing surface water for irrigation often return a portion of the water to a water body. This irrigation return flow often includes sediment and nutrients that reduce the quality of the receiving water body. Research in the 82,000 ha Upper Snake Rock (USR) watershed from 2005 to 2008 s...

Surgical Tooth Implants, Combat and Field.

DTIC Science & Technology

1982-07-15

design. The serrated root portion is alumina ceramic. The upper two parts of the implant (post and core and crown) are conventional dental materials...ceramic. The upper two parts of the implant (post and core and crown) are conventional dental materials, usually gold. Roots are produced by grinding...I1 Clinical Examples of Baboon Dental Implants . . . .. . . . .. 12 Clinical Chemistry and Hematology Results in Baboons. . . . . . . 20

Forested Communities of the Upper Montane in the Central and Southern Sierra Nevada

Treesearch

Donald A. Potter

1998-01-01

Upper montane forests in the central and southern Sierra Nevada of California were classified into 26 plant associations by using information collected from 0.1-acre circular plots. Within this region, the forested environment including the physiographic setting, geology, soils, and vegetation is described in detail. A simulation model is presented for this portion of...

Method for growing low defect, high purity crystalline layers utilizing lateral overgrowth of a patterned mask

NASA Technical Reports Server (NTRS)

Morrison, Andrew D. (Inventor); Daud, Taher (Inventor)

1986-01-01

A method for growing a high purity, low defect layer of semiconductor is described. This method involves depositing a patterned mask of a material impervious to impurities of the semiconductor on a surface of a blank. When a layer of semiconductor is grown on the mask, the semiconductor will first grow from the surface portions exposed by the openings in the mask and will bridge the connecting portions of the mask to form a continuous layer having improved purity, since only the portions overlying the openings are exposed to defects and impurities. The process can be iterated and the mask translated to further improve the quality of grown layers.

Accumulation of RNA homologous to human papillomavirus type 16 open reading frames in genital precancers.

PubMed Central

Crum, C P; Nuovo, G; Friedman, D; Silverstein, S J

1988-01-01

The accumulation of human papillomavirus type 16 (HPV-16)-specific RNAs in tissue sections from biopsies of patients with genital precancers was studied by in situ hybridization with single-stranded 35S-labeled RNA. These analyses revealed that the most abundant early-region RNAs were derived from the E4 and E5 open reading frames (ORFs). RNAs homologous to the E6/E7 ORFs were also detected, whereas RNAs homologous to the intervening E1 ORF were not. This suggests that the E4 and E5 mRNAs are derived by splicing to the upstream E6/E7 ORFs, consistent with studies of HPV-11 in condylomata (L. T. Chow et al., Cancer Cells (Cold Spring Harbor) 5:55-72, 1987). Abundant RNAs homologous to the 5' portion of L1 were also detected. These RNAs were localized to the apical strata of the epithelium. HPV-16 RNAs accumulated in discrete regions of these lesions, and when present were most abundant in the upper cell layers of the precancerous epithelium. RNAs homologous to early ORFs were also detected in some germinal cells within the basal layer of the epithelium. Images PMID:2824859

Accumulation of RNA homologous to human papillomavirus type 16 open reading frames in genital precancers.

PubMed

Crum, C P; Nuovo, G; Friedman, D; Silverstein, S J

1988-01-01

The accumulation of human papillomavirus type 16 (HPV-16)-specific RNAs in tissue sections from biopsies of patients with genital precancers was studied by in situ hybridization with single-stranded 35S-labeled RNA. These analyses revealed that the most abundant early-region RNAs were derived from the E4 and E5 open reading frames (ORFs). RNAs homologous to the E6/E7 ORFs were also detected, whereas RNAs homologous to the intervening E1 ORF were not. This suggests that the E4 and E5 mRNAs are derived by splicing to the upstream E6/E7 ORFs, consistent with studies of HPV-11 in condylomata (L. T. Chow et al., Cancer Cells (Cold Spring Harbor) 5:55-72, 1987). Abundant RNAs homologous to the 5' portion of L1 were also detected. These RNAs were localized to the apical strata of the epithelium. HPV-16 RNAs accumulated in discrete regions of these lesions, and when present were most abundant in the upper cell layers of the precancerous epithelium. RNAs homologous to early ORFs were also detected in some germinal cells within the basal layer of the epithelium.

Femtosecond laser-induced formation of submicrometer spikes on a semiconductor substrate

DOEpatents

Mazur, Eric; Shen, Mengyan

2013-12-03

The present invention generally provides a semiconductor substrates having submicron-sized surface features generated by irradiating the surface with ultra short laser pulses. In one aspect, a method of processing a semiconductor substrate is disclosed that includes placing at least a portion of a surface of the substrate in contact with a fluid, and exposing that surface portion to one or more femtosecond pulses so as to modify the topography of that portion. The modification can include, e.g., generating a plurality of submicron-sized spikes in an upper layer of the surface.

Asymmetric Thrust Reversers

NASA Technical Reports Server (NTRS)

Chandler, Jesse M. (Inventor); Suciu, Gabriel L. (Inventor)

2018-01-01

An aircraft includes a propulsion supported within an aft portion of a fuselage A thrust reverser is mounted in the aft portion of the fuselage proximate the propulsion system for directing thrust in a direction to slow the aircraft. The thrust reverser includes an upper blocker door movable about a first pivot axis to a deployed position and a lower blocker door movable about a second pivot axis not parallel to the first pivot axis.

Nitrogen distribution in a tropical urbanized estuarine system in northeastern Brazil.

PubMed

Dos Santos, Celimarcos Bezerra; Silva, Maria Aparecida Macêdo; de Souza, Marcelo F Landim; da Silva, Daniela Mariano Lopes

2018-01-08

Nitrogen enters estuaries mostly through fluvial discharge and tide, although anthropogenic sources are known to influence the amount of this element in these aquatic ecosystems. Thus, the objective of this work was to verify which river (Cachoeira, Fundão, and/or Santana) exerts greater influence on the distribution of dissolved N forms (Dissolved Organic Nitrogen and Dissolved Inorganic Nitrogen = NH 3 /NH 4 + , NO 2 - , and NO 3 - ) along a tropical urbanized estuarine system in northeastern Brazil. The studies estuarine system lies with in urban municipality, and the upper portion of the Cachoeira river estuary receives the treated effluent from this municipality through a sewage treatment station and untreated effluents from nearby villages. The selected sampling stations were located near the outfall of the rivers in the estuaries to the treatment plant and the villages. Of all the nitrogen forms, dissolved organic nitrogen (DON) prevailed in the estuarine system, followed by nitrate (NO 3 - ) as the main inorganic form. The highest concentrations were recorded in the fluvial portion and upper estuary of Cachoeira river in the dry season. Based on the N concentrations found in the estuarine system, Cachoeira river has the greatest anthropogenic influence due to the amount of untreated effluents from the villages and treated effluents from the sewage treatment plant (STP) in the upper portion of the estuary.

Portable conduit retention apparatus for releasably retaining a conduit therein

DOEpatents

Metzger, Richard H.

1998-01-01

Portable conduit retention apparatus for releasably retaining a conduit therein. The apparatus releasably retains the conduit out of the way of nearby personnel and equipment. The apparatus includes a portable support frame defining a slot therein having an open mouth portion in communication with the slot for receiving the conduit through the open mouth portion and into the slot. A retention bar is pivotally connected to the support frame adjacent the mouth portion for releasably retaining the conduit in the slot. The retention bar freely pivots to a first position, so that the mouth portion is unblocked in order that the conduit is received through the mouth portion and into the slot. In addition, the retention bar freely pivots to a second position, so that the mouth portion is blocked in order that the conduit is retained in the slot. The conduit is released from the slot by pivoting the retention bar to the first position to unblock the mouth portion and thereafter manipulating the conduit from the slot and through the mouth portion. The apparatus may further include a mounting member attached to the support frame for mounting the apparatus on a vertical support surface. Another embodiment of the apparatus includes a shoe assembly of predetermined weight removably connected to the support frame for resting the apparatus on a floor in such a manner that the apparatus is substantially stationary on the floor.

75 FR 8413 - Sunshine Act Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

.... STATUS: The portion of the meeting dealing with agenda items 1 through 6 will be open to the public. The... podcast. MATTERS TO BE CONSIDERED: 1. Report on international activities (open). 2. Commission participation in Congressional staff briefings (open). 3. Status of Annual Compliance Review (open). 4. Status...

19. Main deck just forward of fish batch, portion of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. Main deck just forward of fish batch, portion of fish hatch cover has been opened to show the ventilation grate below. - Schooner "Lettie G. Howard", South Street Seaport Museum, New York County, NY

Transient electromagnetic study of basin fill sediments in the Upper San Pedro Basin, Mexico

USGS Publications Warehouse

Bultman, M.W.; Gray, F.

2011-01-01

The Upper San Pedro River Basin in Mexico and the United States is an important riparian corridor that is coming under increasing pressure from growing populations and the associated increase in groundwater withdrawal. Several studies have produced three-dimensional maps of the basin fill sediments in the US portion of the basin but little work has been done in the Mexican portion of the basin. Here, the results of a ground-based transient electromagnetic (TEM) survey in the Upper San Pedro Basin, Mexico are presented. These basin fill sediments are characterized by a 10-40 m deep unsaturated surficial zone which is composed primarily of sands and gravels. In the central portion of the basin this unsaturated zone is usually underlain by a shallow clay layer 20-50 m thick. Beneath this may be more clay, as is usually the case near the San Pedro River, or interbedded sand, silt, and clay to a depth of 200-250 m. As you move away from the river, the upper clay layer disappears and the amount of sand in the sediments increases. At 1-2 km away from the river, sands can occupy up to 50% of the upper 200-250 m of the sediment fill. Below this, clays are always present except where bedrock highs are observed. This lower clay layer begins at a depth of about 200 m in the central portion of the basin (250 m or more at distances greater than 1-2 km from the river) and extends to the bottom of most profiles to depths of 400 m. While the depth of the top of this lower clay layer is probably accurate, its thickness observed in the models may be overestimated due to the relatively low magnetic moment of the TEM system used in this study. The inversion routine used for interpretation is based on a one-dimensional geologic model. This is a layer based model that is isotropic in both the x and y directions. Several survey soundings did not meet this requirement which invalidates the inversion process and the resulting interpretation at these locations. The results from these locations were rejected. ?? 2011 Springer-Verlag (outside the USA).

Recombination device for storage batteries

DOEpatents

Kraft, H.; Ledjeff, K.

1984-01-01

A recombination device including a gas-tight enclosure connected to receive the discharge gases from a rechargeable storage battery. Catalytic material for the recombination of hydrogen and oxygen to form water is supported within the enclosure. The enclosure is sealed from the atmosphere by a liquid seal including two vertical chambers interconnected with an inverted U-shaped overflow tube. The first chamber is connected at its upper portion to the enclosure and the second chamber communicates at its upper portion with the atmosphere. If the pressure within the enclosure differs as overpressure or vacuum by more than the liquid level, the liquid is forced into one of the two chambers and the overpressure is vented or the vacuum is relieved. The recombination device also includes means for returning recombined liquid to the battery and for absorbing metal hydrides.

Recombination device for storage batteries

DOEpatents

Kraft, Helmut; Ledjeff, Konstantin

1985-01-01

A recombination device including a gas-tight enclosure connected to receive he discharge gases from a rechargeable storage battery. Catalytic material for the recombination of hydrogen and oxygen to form water is supported within the enclosure. The enclosure is sealed from the atmosphere by a liquid seal including two vertical chambers interconnected with an inverted U-shaped overflow tube. The first chamber is connected at its upper portion to the enclosure and the second chamber communicates at its upper portion with the atmosphere. If the pressure within the enclosure differs as overpressure or vacuum by more than the liquid level, the liquid is forced into one of the two chambers and the overpressure is vented or the vacuum is relieved. The recombination device also includes means for returning recombined liquid to the battery and for absorbing metal hydrides.

Fluorescent optical liquid level sensor

DOEpatents

Weiss, Jonathan D.

2001-01-01

A liquid level sensor comprising a transparent waveguide containing fluorescent material that is excited by light of a first wavelength and emits at a second, longer wavelength. The upper end of the waveguide is connected to a light source at the first wavelength through a beveled portion of the waveguide such that the input light is totally internally reflected within the waveguide above an air/liquid interface in a tank but is transmitted into the liquid below this interface. Light is emitted from the fluorescent material only in those portions of the waveguide that are above the air/liquid interface, to be collected at the upper end of the waveguide by a detector that is sensitive only to the second wavelength. As the interface moves down in the tank, the signal strength from the detector will increase.

KSC-2009-1723

NASA Image and Video Library

2009-02-19

VANDENBERG AIR FORCE BASE, Calif. -- On Launch Complex 576-E at Vandenberg Air Force Base in California, NASA's Orbiting Carbon Observatory, or OCO, spacecraft awaits a GN2 instrument purge flow test in preparation for launch Feb. 24. The spacecraft sits atop Orbital Sciences' Taurus XL rocket. At right is a portion of the umbilical tower attached to the upper stack. The spacecraft sits atop Orbital Sciences' Taurus XL rocket. At right is a portion of the umbilical tower attached to the upper stack. The spacecraft will collect precise global measurements of carbon dioxide (CO2) in the Earth's atmosphere. Scientists will analyze OCO data to improve our understanding of the natural processes and human activities that regulate the abundance and distribution of this important greenhouse gas. Photo courtesy of Jim Stowers, Orbital Sciences

CONTINUOUS DISSOLVER EXTRACTOR FOR PROCESSING METAL

DOEpatents

Lemon, R.B.; Buckham, J.A.

1959-02-01

An apparatus is presented for the continuous dissolution of metal slugs in an aqueous acid and sequential continuous extraction of selected metal values from the acid solution by counter-current contact with an organic solvent. The apparatus comprises a cylindrical tank divided into upper and lower sections. Dissolution of the metal slug takes place in the lower section and the solution so produced is continuously fed to the topmost plate of the upper extraction section. An immiscible organic extractant is continuously passed by a pulsing pump into the lowermost unit of the extraction section. Suitable piping and valving permits of removing the aqueous raffinate solution from the lowermost portion of the extraction section, and simultaneous removal of organic solvent extractant containing the desired product from the uppermost portion of the extraction section.

29 CFR 1209.04 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 4 2011-07-01 2011-07-01 false Open meetings. 1209.04 Section 1209.04 Labor Regulations Relating to Labor (Continued) NATIONAL MEDIATION BOARD PUBLIC OBSERVATION OF NATIONAL MEDIATION BOARD MEETINGS § 1209.04 Open meetings. Every portion of every Board meeting shall be open to public observation...

22 CFR 1500.4 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Open meetings. 1500.4 Section 1500.4 Foreign Relations AFRICAN DEVELOPMENT FOUNDATION SUNSHINE REGULATIONS § 1500.4 Open meetings. (a) Members shall not... portion of every meeting of the Board of Directors shall be open to public observation, subject to the...

40 CFR 1517.3 - Open meeting requirement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Open meeting requirement. 1517.3... COUNCIL ON ENVIRONMENTAL QUALITY § 1517.3 Open meeting requirement. (a) Every portion of every meeting of the Council is open to public observation subject to the exemptions provided in § 1517.4. Members of...

7 CFR 1409.3 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Open meetings. 1409.3 Section 1409.3 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF... CORPORATION § 1409.3 Open meetings. Every portion of every meeting of the Board of Directors will be open to...

7 CFR 1409.3 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Open meetings. 1409.3 Section 1409.3 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF... CORPORATION § 1409.3 Open meetings. Every portion of every meeting of the Board of Directors will be open to...

29 CFR 1209.04 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Open meetings. 1209.04 Section 1209.04 Labor Regulations Relating to Labor (Continued) NATIONAL MEDIATION BOARD PUBLIC OBSERVATION OF NATIONAL MEDIATION BOARD MEETINGS § 1209.04 Open meetings. Every portion of every Board meeting shall be open to public observation...

40 CFR 1517.3 - Open meeting requirement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Open meeting requirement. 1517.3... COUNCIL ON ENVIRONMENTAL QUALITY § 1517.3 Open meeting requirement. (a) Every portion of every meeting of the Council is open to public observation subject to the exemptions provided in § 1517.4. Members of...

40 CFR 1517.3 - Open meeting requirement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Open meeting requirement. 1517.3... COUNCIL ON ENVIRONMENTAL QUALITY § 1517.3 Open meeting requirement. (a) Every portion of every meeting of the Council is open to public observation subject to the exemptions provided in § 1517.4. Members of...

29 CFR 1209.04 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 4 2012-07-01 2012-07-01 false Open meetings. 1209.04 Section 1209.04 Labor Regulations Relating to Labor (Continued) NATIONAL MEDIATION BOARD PUBLIC OBSERVATION OF NATIONAL MEDIATION BOARD MEETINGS § 1209.04 Open meetings. Every portion of every Board meeting shall be open to public observation...

40 CFR 1517.3 - Open meeting requirement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Open meeting requirement. 1517.3... COUNCIL ON ENVIRONMENTAL QUALITY § 1517.3 Open meeting requirement. (a) Every portion of every meeting of the Council is open to public observation subject to the exemptions provided in § 1517.4. Members of...

29 CFR 1209.04 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 4 2014-07-01 2014-07-01 false Open meetings. 1209.04 Section 1209.04 Labor Regulations Relating to Labor (Continued) NATIONAL MEDIATION BOARD PUBLIC OBSERVATION OF NATIONAL MEDIATION BOARD MEETINGS § 1209.04 Open meetings. Every portion of every Board meeting shall be open to public observation...

7 CFR 1409.3 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Open meetings. 1409.3 Section 1409.3 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF... CORPORATION § 1409.3 Open meetings. Every portion of every meeting of the Board of Directors will be open to...

22 CFR 1500.4 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Open meetings. 1500.4 Section 1500.4 Foreign Relations AFRICAN DEVELOPMENT FOUNDATION SUNSHINE REGULATIONS § 1500.4 Open meetings. (a) Members shall not... portion of every meeting of the Board of Directors shall be open to public observation, subject to the...

7 CFR 1409.3 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Open meetings. 1409.3 Section 1409.3 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF... CORPORATION § 1409.3 Open meetings. Every portion of every meeting of the Board of Directors will be open to...

40 CFR 1517.3 - Open meeting requirement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Open meeting requirement. 1517.3... COUNCIL ON ENVIRONMENTAL QUALITY § 1517.3 Open meeting requirement. (a) Every portion of every meeting of the Council is open to public observation subject to the exemptions provided in § 1517.4. Members of...

22 CFR 1500.4 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 2 2012-04-01 2009-04-01 true Open meetings. 1500.4 Section 1500.4 Foreign Relations AFRICAN DEVELOPMENT FOUNDATION SUNSHINE REGULATIONS § 1500.4 Open meetings. (a) Members shall not... portion of every meeting of the Board of Directors shall be open to public observation, subject to the...

22 CFR 1500.4 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 2 2014-04-01 2014-04-01 false Open meetings. 1500.4 Section 1500.4 Foreign Relations AFRICAN DEVELOPMENT FOUNDATION SUNSHINE REGULATIONS § 1500.4 Open meetings. (a) Members shall not... portion of every meeting of the Board of Directors shall be open to public observation, subject to the...

29 CFR 1209.04 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 4 2013-07-01 2013-07-01 false Open meetings. 1209.04 Section 1209.04 Labor Regulations Relating to Labor (Continued) NATIONAL MEDIATION BOARD PUBLIC OBSERVATION OF NATIONAL MEDIATION BOARD MEETINGS § 1209.04 Open meetings. Every portion of every Board meeting shall be open to public observation...

22 CFR 1500.4 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 2 2013-04-01 2009-04-01 true Open meetings. 1500.4 Section 1500.4 Foreign Relations AFRICAN DEVELOPMENT FOUNDATION SUNSHINE REGULATIONS § 1500.4 Open meetings. (a) Members shall not... portion of every meeting of the Board of Directors shall be open to public observation, subject to the...

7 CFR 1409.3 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Open meetings. 1409.3 Section 1409.3 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF... CORPORATION § 1409.3 Open meetings. Every portion of every meeting of the Board of Directors will be open to...

75 FR 15753 - Sunshine Act Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

.... STATUS: Parts of this meeting will be open to the public. The rest of the meeting will be closed to the public. The public session will be podcast. MATTERS TO BE CONSIDERED: PORTIONS OPEN TO THE PUBLIC: 1. Review of Postal-related congressional activity (open). 2. Report on international activities (open). 3...

Method for encapsulating the edge of a flexible sheet

DOEpatents

Keenihan, James R; Clarey, Todd M

2013-02-19

The present invention is premised upon an inventive method of producing an over-molded edge portion on a flexible substrate, wherein the edge portion is void of open areas due to support devices in the mold cavity.

Low temperature barrier wellbores formed using water flushing

DOEpatents

McKinzie, II; John, Billy [Houston, TX; Keltner, Thomas Joseph [Spring, TX

2009-03-10

A method of forming an opening for a low temperature well is described. The method includes drilling an opening in a formation. Water is introduced into the opening to displace drilling fluid or indigenous gas in the formation adjacent to a portion of the opening. Water is produced from the opening. A low temperature fluid is applied to the opening.

FY 2007 Progress Report for Upper Columbia United Tribes' Regional Coordination.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michel, D.R.

2008-12-15

This report is a summary of activities conducted over the fiscal year 2007 contract period to fulfill requirements to coordinate Upper Columbia United Tribes (UCUT) interests within the Columbia River Basin. This coordination was specific to the implementation of portions of the Integrated Fish and Wildlife Program within the purview of the Northwest Power and Conservation Council and Bonneville Power Administration.

Upper Rio Grande water operations model: A tool for enhanced system management

Treesearch

Gail Stockton; D. Michael Roark

1999-01-01

The Upper Rio Grande Water Operations Model (URGWOM) under development through a multi-agency effort has demonstrated capability to represent the physical river/reservoir system, to track and account for Rio Grande flows and imported San Juan flows, and to forecast flows at various points in the system. Testing of the Rio Chama portion of the water operations model was...

Intra and inter-rater reliability of infrared image analysis of masticatory and upper trapezius muscles in women with and without temporomandibular disorder.

PubMed

Costa, Ana C S; Dibai Filho, Almir V; Packer, Amanda C; Rodrigues-Bigaton, Delaine

2013-01-01

Infrared thermography is an aid tool that can be used to evaluate several pathologies given its efficiency in analyzing the distribution of skin surface temperature. To propose two forms of infrared image analysis of the masticatory and upper trapezius muscles, and to determine the intra and inter-rater reliability of both forms of analysis. Infrared images of masticatory and upper trapezius muscles of 64 female volunteers with and without temporomandibular disorder (TMD) were collected. Two raters performed the infrared image analysis, which occurred in two ways: temperature measurement of the muscle length and in central portion of the muscle. The Intraclass Correlation Coefficient (ICC) was used to determine the intra and inter-rater reliability. The ICC showed excellent intra and inter-rater values for both measurements: temperature measurement of the muscle length (TMD group, intra-rater, ICC ranged from 0.996 to 0.999, inter-rater, ICC ranged from 0.992 to 0.999; control group, intra-rater, ICC ranged from 0.993 to 0.998, inter-rater, ICC ranged from 0.990 to 0.998), and temperature measurement of the central portion of the muscle (TMD group, intra-rater, ICC ranged from 0.981 to 0.998, inter-rater, ICC ranged from 0.971 to 0.998; control group, intra-rater, ICC ranged from 0.887 to 0.996, inter-rater, ICC ranged from 0.852 to 0.996). The results indicated that temperature measurements of the masticatory and upper trapezius muscles carried out by the analysis of the muscle length and central portion yielded excellent intra and inter-rater reliability.

ARC-1985-A86-7001

NASA Image and Video Library

1985-11-28

Range: 72.3 million km. ( 44.9 million miles ) P-29314B/W This Voyager 2 photograph of Uranus shows the planets outermost, or epsilon, ring. This is a computerized summation of six images shot by the narrow angle camera. It is the first photo to show the epsilon ring unblurred by Earth's atmosphere. The Epsilon ring, some 51,200 km. ( 31,800 miles ) from the planets center, is the most prominent of Uranus' nine known rings. Ground based observations of stellar occulations by the rings have determined that the Epsilon ring is eccentric, or elliptical, with its widest portion about 100 km. ( 60 miles ) wide and its narrowest portion about 20 km. (12 miles ). Estimates of the rings brightness suggest that it is also very dark, with a reflectance of only 1 or 2 percent and a probable composition of carbonaceous material similiar to that on dark asteroids and the dark side of Saturn's moon Lapetus. Because the ring is so narrow and dark, at this range, the Voyager camera could not resolve even the widest part, resulting in long exposure times so obtain a good image. six exposures of 11 or 15 second duration were added together by computer to produce this image. In this image, the central portion is greatly overexposed. Various artifacts due to electronic effects and image proccessing can be seen in the central portion of the frame, including the dark image just above the planets image, the diffuse brightening below it and the small, bright projection from the edge of the planet in the upper left. The ring is distinctly less prominent in the lower left portion and more prominent in the upper right. This is in agreement with the predicted locations of the narrow and wide portions of the ring, respectively.

[Simultaneous interventions on the ascending portion, arch of the aorta and cardiac valves in patients with Marfan's syndrome].

PubMed

Belov, Iu V; Stepanenko, A B; Gens, A P; Charchian, E R; Savichev, D D

2007-01-01

Simultaneous surgical interventions on the aorta and valvular system of the heart were performed in four patients presenting with aortic dissections and aneurysms conditioned by Marfan's syndrome. The following reconstructive operations were carried out: 1) prosthetic repair of the aortic valve and the ascending portion of the aorta by means of a valve-containing conduit with replantation of the openings of the coronary arteries into the side of the prosthesis according to the Benthall - De Bono technique, annuloplasty of the tricuspid valve according to the De Vega technique, valvuloplasty of the mitral valve by the Alferi technique; 2) grafting of the aortic valve and the ascending portion of the aorta by means of a valve-containing conduit with replantation of the openings of the coronary arteries according to the Kabrol's technique, plasty of the tricuspid valve by the De Vega technique; 3) prosthetic repair of the aortic arch with distal wedge-like excision of the membrane of the dissection and directing the blood flow along the both channels, plasty of the mitral valve, plasty of the aortic valve and the ascending portion of the aorta with a valve-containing conduit, accompanied by replantation of the openings of the coronary arteries into the side of the graft according to the Benthall - De Bono technique; (4) plasty of the mitral valve with a disk graft through the fibrous ring of the aortic valve, prosthetic repair of the aortic valve and the ascending portion of the aorta with a valve-containing conduit, accompanied by replantation of the openings of the coronary arteries into the side according to the Benthall-De Bono technique.

12 CFR 604.415 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 7 2014-01-01 2014-01-01 false Open meetings. 604.415 Section 604.415 Banks... MEETINGS § 604.415 Open meetings. Every meeting and portion of a meeting of the Board shall be open to... part, and that the public interest is not served by the discussion of such matters in an open meeting...

12 CFR 604.415 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Open meetings. 604.415 Section 604.415 Banks... MEETINGS § 604.415 Open meetings. Every meeting and portion of a meeting of the Board shall be open to... part, and that the public interest is not served by the discussion of such matters in an open meeting...

12 CFR 604.415 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Open meetings. 604.415 Section 604.415 Banks... MEETINGS § 604.415 Open meetings. Every meeting and portion of a meeting of the Board shall be open to... part, and that the public interest is not served by the discussion of such matters in an open meeting...

12 CFR 604.415 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 7 2012-01-01 2012-01-01 false Open meetings. 604.415 Section 604.415 Banks... MEETINGS § 604.415 Open meetings. Every meeting and portion of a meeting of the Board shall be open to... part, and that the public interest is not served by the discussion of such matters in an open meeting...

12 CFR 604.415 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Open meetings. 604.415 Section 604.415 Banks... MEETINGS § 604.415 Open meetings. Every meeting and portion of a meeting of the Board shall be open to... part, and that the public interest is not served by the discussion of such matters in an open meeting...

A Simple Endoscopic Technique for Measuring the Cross-Sectional Area of the Upper Airway in a Rabbit Model.

PubMed

Wistermayer, Paul R; McIlwain, Wesley R; Ieronimakis, Nicholas; Rogers, Derek J

2018-04-01

Validate an accurate and reproducible method of measuring the cross-sectional area (CSA) of the upper airway. This is a prospective animal study done at a tertiary care medical treatment facility. Control images were obtained using endotracheal tubes of varying sizes. In vivo images were obtained from various timepoints of a concurrent study on subglottic stenosis. Using a 0° rod telescope, an instrument was placed at the level of interest, and a photo was obtained. Three independent and blinded raters then measured the CSA of the narrowest portion of the airway using open source image analysis software. Each blinded rater measured the CSA of 79 photos. The t testing to assess for accuracy showed no difference between measured and known CSAs of the control images ( P = .86), with an average error of 1.5% (SD = 5.5%). All intraclass correlation (ICC) values for intrarater agreement showed excellent agreement (ICC > .75). Interrater reliability among all raters in control (ICC = .975; 95% CI, .817-.995) and in vivo (ICC = .846;, 95% CI, .780-.896) images showed excellent agreement. We validate a simple, accurate, and reproducible method of measuring the CSA of the airway that can be used in a clinical or research setting.

Fuel injection assembly for use in turbine engines and method of assembling same

DOEpatents

Uhm, Jong Ho; Johnson, Thomas Edward

2015-03-24

A fuel injection assembly for use in a turbine engine is provided. The fuel injection assembly includes a plurality of tube assemblies, wherein each of the tube assemblies includes an upstream portion and a downstream portion. Each tube assembly includes a plurality of tubes that extend from the upstream portion to the downstream portion or from the upstream portion through the downstream portion. At least one injection system is coupled to at least one tube assembly of the plurality of tube assemblies. The injection system includes a fluid supply member that extends from a fluid source to the downstream portion of the tube assembly. The fluid supply member includes a first end portion located in the downstream portion of the tube assembly, wherein the first end portion has at least one first opening for channeling fluid through the tube assembly to facilitate reducing a temperature therein.

Capacitance reduction for pillar structured devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shao, Qinghui; Conway, Adam; Nikolic, Rebecca J.

2017-05-09

In one embodiment, an apparatus includes: a first layer including a n+ dopant or p+ dopant; an intrinsic layer formed above the first layer, the intrinsic layer including a planar portion and pillars extending above the planar portion, cavity regions being defined between the pillars; and a second layer deposited on a periphery of the pillars thereby forming coated pillars, the second layer being substantially absent on the planar portion of the intrinsic layer between the coated pillars. The second layer includes an n+ dopant when the first layer includes a p+ dopant. The second layer includes a p+ dopantmore » when the first layer includes an n+ dopant. The apparatus includes a neutron sensitive material deposited between the coated pillars and above the planar portion of the intrinsic layer. In additional embodiments, an upper portion of each of the pillars includes a same type of dopant as the second layer.« less

Earth Observations taken by the Expedition 13 crew

NASA Image and Video Library

2006-05-10

ISS013-E-17394 (10 May 2006) --- The central Phoenix Metro Area, Arizona is featured in this image photographed by an Expedition 13 crewmember on the International Space Station. The Phoenix, Arizona metropolitan area is the largest in the southwestern United States, and is comprised of 21 contiguous incorporated municipalities. Such a collection of discrete political entities forming a larger integrated urban landscape is referred to as a conurbation by urban geographers. This portion of a high resolution (approximately 9 meters/pixel) photograph (upper image) of the central metro region includes the boundary area between three of the municipalities included in the conurbation: the Cities of Phoenix (upper image, left), Tempe (upper image, center and lower right), and Scottsdale (upper image, upper right).

Portable conduit retention apparatus for releasably retaining a conduit therein

DOEpatents

Metzger, R.H.

1998-07-07

Portable conduit retention apparatus is described for releasably retaining a conduit therein. The apparatus releasably retains the conduit out of the way of nearby personnel and equipment. The apparatus includes a portable support frame defining a slot therein having an open mouth portion in communication with the slot for receiving the conduit through the open mouth portion and into the slot. A retention bar is pivotally connected to the support frame adjacent the mouth portion for releasably retaining the conduit in the slot. The retention bar freely pivots to a first position, so that the mouth portion is unblocked in order that the conduit is received through the mouth portion and into the slot. In addition, the retention bar freely pivots to a second position, so that the mouth portion is blocked in order that the conduit is retained in the slot. The conduit is released from the slot by pivoting the retention bar to the first position to unblock the mouth portion and thereafter manipulating the conduit from the slot and through the mouth portion. The apparatus may further include a mounting member attached to the support frame for mounting the apparatus on a vertical support surface. Another embodiment of the apparatus includes a shoe assembly of predetermined weight removably connected to the support frame for resting the apparatus on a floor in such a manner that the apparatus is substantially stationary on the floor. 6 figs.

Torso sizing ring construction for hard space suit

NASA Technical Reports Server (NTRS)

Vykukal, H. C.

1986-01-01

A hard suit for use in space or diving applications having an adjustable length torso covering that will fit a large variety of wearers is described. The torso covering comprises an upper section and a lower section which interconnect so that the covering will fit wearers with short torsos. One or more sizing rings may be inserted between the upper and lower sections to accommodate larger torso sizes as required. Since access of the astronaut to the torso covering is preferably through an opening in the back of the upper section (which is closed off by the backpack), the rings slant upward-forward from the lower edge of the opening. The lower edge of the upper covering section has a coupler which slants upward-forward from the lower edge of the back opening. The lower torso section has a similarly slanted coupler which may interfit with the upper section coupler to accommodate the smallest torso size. One or more sizing rings may be inserted between the coupler sections of the upper and lower torso sections to accommodate larger torsos. Each ring has an upper coupler which may interfit with the upper section coupler and a lower coupler which may interfit with the lower section coupler.

45 CFR 702.52 - Open meeting requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 3 2010-10-01 2010-10-01 false Open meeting requirements. 702.52 Section 702.52... HEARINGS, REPORTS, AND MEETINGS OF THE COMMISSION Meetings § 702.52 Open meeting requirements. (a) Every portion of every Commission meeting shall be open to public observation, except as provided in § 702.53 of...

28 CFR 16.202 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 1 2014-07-01 2014-07-01 false Open meetings. 16.202 Section 16.202... Observation of Parole Commission Meetings § 16.202 Open meetings. (a) Every portion of every meeting of the Commission shall be open to public observation unless closed to the public pursuant to the provisions of § 16...

49 CFR 804.4 - Open meetings requirement.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Open meetings requirement. 804.4 Section 804.4... RULES IMPLEMENTING THE GOVERNMENT IN THE SUNSHINE ACT § 804.4 Open meetings requirement. Members shall... provided in § 804.5, every portion of every meeting of the Board shall be open to public observation. ...

12 CFR 791.11 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Open meetings. 791.11 Section 791.11 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING THE OPERATIONS OF THE NATIONAL CREDIT... Open meetings. Except as provided in § 791.12(a), any portion of any meeting of the Board shall be open...

45 CFR 1802.3 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 4 2014-10-01 2014-10-01 false Open meetings. 1802.3 Section 1802.3 Public... MEETING PROCEDURES OF THE BOARD OF TRUSTEES § 1802.3 Open meetings. (a) Members shall not jointly conduct... portion of every meeting of the Board of Trustees or any committees of the Board shall be open to public...

5 CFR 1632.4 - Meetings open to public observation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 3 2012-01-01 2012-01-01 false Meetings open to public observation. 1632... PUBLIC OBSERVATION OF MEETINGS § 1632.4 Meetings open to public observation. (a) Except as provided in § 1632.5 of this part, every portion of every meeting of the agency shall be open to public observation...

45 CFR 1802.3 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 4 2012-10-01 2012-10-01 false Open meetings. 1802.3 Section 1802.3 Public... MEETING PROCEDURES OF THE BOARD OF TRUSTEES § 1802.3 Open meetings. (a) Members shall not jointly conduct... portion of every meeting of the Board of Trustees or any committees of the Board shall be open to public...

5 CFR 1632.4 - Meetings open to public observation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Meetings open to public observation. 1632... PUBLIC OBSERVATION OF MEETINGS § 1632.4 Meetings open to public observation. (a) Except as provided in § 1632.5 of this part, every portion of every meeting of the agency shall be open to public observation...

12 CFR 791.11 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Open meetings. 791.11 Section 791.11 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING THE OPERATIONS OF THE NATIONAL CREDIT... Open meetings. Except as provided in § 791.12(a), any portion of any meeting of the Board shall be open...

45 CFR 1802.3 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 4 2011-10-01 2011-10-01 false Open meetings. 1802.3 Section 1802.3 Public... MEETING PROCEDURES OF THE BOARD OF TRUSTEES § 1802.3 Open meetings. (a) Members shall not jointly conduct... portion of every meeting of the Board of Trustees or any committees of the Board shall be open to public...

49 CFR 804.4 - Open meetings requirement.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Open meetings requirement. 804.4 Section 804.4... RULES IMPLEMENTING THE GOVERNMENT IN THE SUNSHINE ACT § 804.4 Open meetings requirement. Members shall... provided in § 804.5, every portion of every meeting of the Board shall be open to public observation. ...

45 CFR 1802.3 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 4 2013-10-01 2013-10-01 false Open meetings. 1802.3 Section 1802.3 Public... MEETING PROCEDURES OF THE BOARD OF TRUSTEES § 1802.3 Open meetings. (a) Members shall not jointly conduct... portion of every meeting of the Board of Trustees or any committees of the Board shall be open to public...

5 CFR 1632.4 - Meetings open to public observation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 3 2014-01-01 2014-01-01 false Meetings open to public observation. 1632... PUBLIC OBSERVATION OF MEETINGS § 1632.4 Meetings open to public observation. (a) Except as provided in § 1632.5 of this part, every portion of every meeting of the agency shall be open to public observation...

28 CFR 16.202 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 1 2013-07-01 2013-07-01 false Open meetings. 16.202 Section 16.202... Observation of Parole Commission Meetings § 16.202 Open meetings. (a) Every portion of every meeting of the Commission shall be open to public observation unless closed to the public pursuant to the provisions of § 16...

49 CFR 804.4 - Open meetings requirement.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Open meetings requirement. 804.4 Section 804.4... RULES IMPLEMENTING THE GOVERNMENT IN THE SUNSHINE ACT § 804.4 Open meetings requirement. Members shall... provided in § 804.5, every portion of every meeting of the Board shall be open to public observation. ...

28 CFR 16.202 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Open meetings. 16.202 Section 16.202... Observation of Parole Commission Meetings § 16.202 Open meetings. (a) Every portion of every meeting of the Commission shall be open to public observation unless closed to the public pursuant to the provisions of § 16...

7 CFR 1600.3 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 11 2013-01-01 2013-01-01 false Open meetings. 1600.3 Section 1600.3 Agriculture... GENERAL INFORMATION Meetings of the Board of Directors of the Rural Telephone Bank § 1600.3 Open meetings. (a) Except as provided for in § 1600.6 every portion of every meeting of the Board shall be open to...

28 CFR 16.202 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 1 2011-07-01 2011-07-01 false Open meetings. 16.202 Section 16.202... Observation of Parole Commission Meetings § 16.202 Open meetings. (a) Every portion of every meeting of the Commission shall be open to public observation unless closed to the public pursuant to the provisions of § 16...

12 CFR 791.11 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Open meetings. 791.11 Section 791.11 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING THE OPERATIONS OF THE NATIONAL CREDIT... Open meetings. Except as provided in § 791.12(a), any portion of any meeting of the Board shall be open...

12 CFR 791.11 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 7 2012-01-01 2012-01-01 false Open meetings. 791.11 Section 791.11 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING THE OPERATIONS OF THE NATIONAL CREDIT... Open meetings. Except as provided in § 791.12(a), any portion of any meeting of the Board shall be open...

5 CFR 1632.4 - Meetings open to public observation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 3 2013-01-01 2013-01-01 false Meetings open to public observation. 1632... PUBLIC OBSERVATION OF MEETINGS § 1632.4 Meetings open to public observation. (a) Except as provided in § 1632.5 of this part, every portion of every meeting of the agency shall be open to public observation...

7 CFR 1600.3 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 11 2012-01-01 2012-01-01 false Open meetings. 1600.3 Section 1600.3 Agriculture... GENERAL INFORMATION Meetings of the Board of Directors of the Rural Telephone Bank § 1600.3 Open meetings. (a) Except as provided for in § 1600.6 every portion of every meeting of the Board shall be open to...

45 CFR 702.52 - Open meeting requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 3 2013-10-01 2013-10-01 false Open meeting requirements. 702.52 Section 702.52... HEARINGS, REPORTS, AND MEETINGS OF THE COMMISSION Meetings § 702.52 Open meeting requirements. (a) Every portion of every Commission meeting shall be open to public observation, except as provided in § 702.53 of...

28 CFR 16.202 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 1 2012-07-01 2012-07-01 false Open meetings. 16.202 Section 16.202... Observation of Parole Commission Meetings § 16.202 Open meetings. (a) Every portion of every meeting of the Commission shall be open to public observation unless closed to the public pursuant to the provisions of § 16...

49 CFR 804.4 - Open meetings requirement.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Open meetings requirement. 804.4 Section 804.4... RULES IMPLEMENTING THE GOVERNMENT IN THE SUNSHINE ACT § 804.4 Open meetings requirement. Members shall... provided in § 804.5, every portion of every meeting of the Board shall be open to public observation. ...

45 CFR 702.52 - Open meeting requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 3 2011-10-01 2011-10-01 false Open meeting requirements. 702.52 Section 702.52... HEARINGS, REPORTS, AND MEETINGS OF THE COMMISSION Meetings § 702.52 Open meeting requirements. (a) Every portion of every Commission meeting shall be open to public observation, except as provided in § 702.53 of...

7 CFR 1600.3 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 11 2011-01-01 2011-01-01 false Open meetings. 1600.3 Section 1600.3 Agriculture... GENERAL INFORMATION Meetings of the Board of Directors of the Rural Telephone Bank § 1600.3 Open meetings. (a) Except as provided for in § 1600.6 every portion of every meeting of the Board shall be open to...

12 CFR 791.11 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 7 2014-01-01 2014-01-01 false Open meetings. 791.11 Section 791.11 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING THE OPERATIONS OF THE NATIONAL CREDIT... Open meetings. Except as provided in § 791.12(a), any portion of any meeting of the Board shall be open...

5 CFR 1632.4 - Meetings open to public observation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 3 2011-01-01 2011-01-01 false Meetings open to public observation. 1632... PUBLIC OBSERVATION OF MEETINGS § 1632.4 Meetings open to public observation. (a) Except as provided in § 1632.5 of this part, every portion of every meeting of the agency shall be open to public observation...

7 CFR 1600.3 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Open meetings. 1600.3 Section 1600.3 Agriculture... GENERAL INFORMATION Meetings of the Board of Directors of the Rural Telephone Bank § 1600.3 Open meetings. (a) Except as provided for in § 1600.6 every portion of every meeting of the Board shall be open to...

7 CFR 1600.3 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 11 2014-01-01 2014-01-01 false Open meetings. 1600.3 Section 1600.3 Agriculture... GENERAL INFORMATION Meetings of the Board of Directors of the Rural Telephone Bank § 1600.3 Open meetings. (a) Except as provided for in § 1600.6 every portion of every meeting of the Board shall be open to...

45 CFR 702.52 - Open meeting requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 3 2012-10-01 2012-10-01 false Open meeting requirements. 702.52 Section 702.52... HEARINGS, REPORTS, AND MEETINGS OF THE COMMISSION Meetings § 702.52 Open meeting requirements. (a) Every portion of every Commission meeting shall be open to public observation, except as provided in § 702.53 of...

49 CFR 804.4 - Open meetings requirement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Open meetings requirement. 804.4 Section 804.4... RULES IMPLEMENTING THE GOVERNMENT IN THE SUNSHINE ACT § 804.4 Open meetings requirement. Members shall... provided in § 804.5, every portion of every meeting of the Board shall be open to public observation. ...

45 CFR 702.52 - Open meeting requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 3 2014-10-01 2014-10-01 false Open meeting requirements. 702.52 Section 702.52... HEARINGS, REPORTS, AND MEETINGS OF THE COMMISSION Meetings § 702.52 Open meeting requirements. (a) Every portion of every Commission meeting shall be open to public observation, except as provided in § 702.53 of...

45 CFR 1802.3 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Open meetings. 1802.3 Section 1802.3 Public... MEETING PROCEDURES OF THE BOARD OF TRUSTEES § 1802.3 Open meetings. (a) Members shall not jointly conduct... portion of every meeting of the Board of Trustees or any committees of the Board shall be open to public...

47 CFR 76.1508 - Network non-duplication.

Code of Federal Regulations, 2014 CFR

2014-10-01

... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Open Video Systems § 76.1508 Network non-duplication. (a) Sections 76.92 through 76.97 shall apply to open video systems in accordance with the provisions contained... unit” shall apply to an open video system or that portion of an open video system that operates or will...

47 CFR 76.1508 - Network non-duplication.

Code of Federal Regulations, 2012 CFR

2012-10-01

... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Open Video Systems § 76.1508 Network non-duplication. (a) Sections 76.92 through 76.97 shall apply to open video systems in accordance with the provisions contained... unit” shall apply to an open video system or that portion of an open video system that operates or will...

47 CFR 76.1508 - Network non-duplication.

Code of Federal Regulations, 2013 CFR

2013-10-01

... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Open Video Systems § 76.1508 Network non-duplication. (a) Sections 76.92 through 76.97 shall apply to open video systems in accordance with the provisions contained... unit” shall apply to an open video system or that portion of an open video system that operates or will...

47 CFR 76.1508 - Network non-duplication.

Code of Federal Regulations, 2011 CFR

2011-10-01

... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Open Video Systems § 76.1508 Network non-duplication. (a) Sections 76.92 through 76.97 shall apply to open video systems in accordance with the provisions contained... unit” shall apply to an open video system or that portion of an open video system that operates or will...

Valve

DOEpatents

Cho, Nakwon

1980-01-01

A positive acting valve suitable for operation in a corrosive environment is provided. The valve includes a hollow valve body defining an open-ended bore for receiving two, axially aligned, spaced-apart, cylindrical inserts. One insert, designated the seat insert, terminates inside the valve body in an annular face which lies within plane normal to the axis of the two inserts. An elastomeric O-ring seal is disposed in a groove extending about the annular face. The other insert, designated the wedge insert, terminates inside the valve body in at least two surfaces oppositely inclined with respect to each other and with respect to a plane normal to the axis of the two inserts. An elongated reciprocable gate, movable between the two inserts along a path normal to the axis of the two inserts, has a first flat face portion disposed adjacent and parallel to the annular face of the seat insert. The gate has a second face portion opposite to the first face portion provided with at least two oppositely inclined surfaces for mating with respective inclined surfaces of the wedge insert. An opening is provided through the gate which registers with a flow passage through the two inserts when the valve is open. Interaction of the respective inclined surfaces of the gate and wedge insert act to force the first flat face portion of the gate against the O-ring seal in the seat insert at the limits of gate displacement where it reaches its respective fully open and fully closed positions.

Fast fluidized bed steam generator

DOEpatents

Bryers, Richard W.; Taylor, Thomas E.

1980-01-01

A steam generator in which a high-velocity, combustion-supporting gas is passed through a bed of particulate material to provide a fluidized bed having a dense-phase portion and an entrained-phase portion for the combustion of fuel material. A first set of heat transfer elements connected to a steam drum is vertically disposed above the dense-phase fluidized bed to form a first flow circuit for heat transfer fluid which is heated primarily by the entrained-phase fluidized bed. A second set of heat transfer elements connected to the steam drum and forming the wall structure of the furnace provides a second flow circuit for the heat transfer fluid, the lower portion of which is heated by the dense-phase fluidized bed and the upper portion by the entrained-phase fluidized bed.

Expected performance of m-solution backtracking

NASA Technical Reports Server (NTRS)

Nicol, D. M.

1986-01-01

This paper derives upper bounds on the expected number of search tree nodes visited during an m-solution backtracking search, a search which terminates after some preselected number m problem solutions are found. The search behavior is assumed to have a general probabilistic structure. The results are stated in terms of node expansion and contraction. A visited search tree node is said to be expanding if the mean number of its children visited by the search exceeds 1 and is contracting otherwise. It is shown that if every node expands, or if every node contracts, then the number of search tree nodes visited by a search has an upper bound which is linear in the depth of the tree, in the mean number of children a node has, and in the number of solutions sought. Also derived are bounds linear in the depth of the tree in some situations where an upper portion of the tree contracts (expands), while the lower portion expands (contracts). While previous analyses of 1-solution backtracking have concluded that the expected performance is always linear in the tree depth, the model allows superlinear expected performance.

Reactor-released radionuclides in Susquehanna River sediments

USGS Publications Warehouse

Olsen, C.R.; Larsen, I.L.; Cutshall, N.H.; Donoghue, J.F.; Bricker, O.P.; Simpson, H.J.

1981-01-01

Three Mile Island (TMI) and Peach Bottom (PB) reactors have introduced 137Cs, 134Cs, 60Co, 58Co and several other anthropogenic radionuclides into the lower Susquehanna River. Here we present the release history for these nuclides (Table 1) and radionuclide concentration data (Table 2) for sediment samples collected in the river and upper portions of the Chesapeake Bay (Fig. 1) within a few months after the 28 March 1979 loss-of-coolant-water problem at TMI. Although we found no evidence for nuclides characteristic of a ruptured fuel element, we did find nuclides characteristic of routine operations. Despite the TMI incident, more than 95% of the total 134Cs input to the Susquehanna has been a result of controlled low-level releases from the PB site. 134Cs activity released into the river is effectively trapped by sediments with the major zones of reactor-nuclide accumulation behind Conowingo Dam and in the upper portions of Chesapeake Bay. The reported distributions document the fate of reactor-released radionuclides and their extent of environmental contamination in the Susquehanna-Upper Chesapeake Bay System. ?? 1981 Nature Publishing Group.

Tibet-Kashmir, looking northwest, photographed during MA-9 flight

NASA Image and Video Library

1963-05-16

S63-06444 (15-16 May 1963) --- Tibet-Kashmir, looking northwest, as photographed from the Mercury-Atlas 9 (MA-9) capsule by astronaut L. Gordon Cooper Jr. during his 22-orbit MA-9 spaceflight. Lake Ch'in-Tzu-Hu is at upper right, Lake Yen-K'o-Ling-Ts is at lower left center. The Korakaram Range is at upper center portion of the picture. Photo credit: NASA

Solar concentrator protective system

NASA Technical Reports Server (NTRS)

Selcuk, M. K. (Inventor)

1984-01-01

A mechanism that blocks concentrated sunlight from reaching a receiver, in the event of a tracking failure or loss of coolant is described. Sunlight is normally concentrated by a dish reflector onto the opening of a receiver. A faceplate surrounds the opening, and coolant carrying tubes, line the receiver. If the concentrated sunlight wanders so it begins to fall on the faceplate, then the sunlight will melt a portion of a fuse wire portion will break. The wire is attached to a flange on a shutter frame, and breaking of the fuse wire allows the frame to fall. Normally, the shutter frame supports shutter elements that are held open by cam followers that bear against cams.

FAST OPENING SWITCH

DOEpatents

Bender, M.; Bennett, F.K.; Kuckes, A.F.

1963-09-17

A fast-acting electric switch is described for rapidly opening a circuit carrying large amounts of electrical power. A thin, conducting foil bridges a gap in this circuit and means are provided for producing a magnetic field and eddy currents in the foil, whereby the foil is rapidly broken to open the circuit across the gap. Advantageously the foil has a hole forming two narrow portions in the foil and the means producing the magnetic field and eddy currents comprises an annular coil having its annulus coaxial with the hole in the foil and turns adjacent the narrow portions of the foil. An electrical current flows through the coil to produce the magnetic field and eddy currents in the foil. (AEC)

Side wall cooling for nozzle segments for a gas turbine

DOEpatents

Burdgick, Steven Sebastian

2002-01-01

A nozzle vane segment includes outer and inner band portions with a vane extending therebetween and defining first and second cavities separated by an impingement plate for flowing cooling medium for impingement cooling of nozzle side walls. The side wall of each nozzle segment has an undercut region. The impingement plate has an inturned flange with a plurality of openings. Cooling inserts or receptacles having an open end are received in the openings and the base and side walls of the receptacles have apertures for receiving cooling medium from the first cavity and directing the cooling medium for impingement cooling of the side wall of the nozzle segment and a portion of the nozzle wall.

Gas turbine engine adapted for use in combination with an apparatus for separating a portion of oxygen from compressed air

DOEpatents

Bland, Robert J [Oviedo, FL; Horazak, Dennis A [Orlando, FL

2012-03-06

A gas turbine engine is provided comprising an outer shell, a compressor assembly, at least one combustor assembly, a turbine assembly and duct structure. The outer shell includes a compressor section, a combustor section, an intermediate section and a turbine section. The intermediate section includes at least one first opening and at least one second opening. The compressor assembly is located in the compressor section to define with the compressor section a compressor apparatus to compress air. The at least one combustor assembly is coupled to the combustor section to define with the combustor section a combustor apparatus. The turbine assembly is located in the turbine section to define with the turbine section a turbine apparatus. The duct structure is coupled to the intermediate section to receive at least a portion of the compressed air from the compressor apparatus through the at least one first opening in the intermediate section, pass the compressed air to an apparatus for separating a portion of oxygen from the compressed air to produced vitiated compressed air and return the vitiated compressed air to the intermediate section via the at least one second opening in the intermediate section.

Canyons and Mesas of Aureum Chaos

NASA Image and Video Library

2002-06-26

This image from NASA Mars Odyssey shows a portion of Aureum Chaos located just south of the Martian equator. This fractured landscape contains canyons and mesas with two large impact craters in the upper left.

Admissible Shape Parameters for a Planar Quasi-Static Constraint Mode Tire Model

DTIC Science & Technology

2014-01-21

Journal of Vibration, 1988. 110(1): p. 70-75. 4. Zegelaar, P.W.A.P., H. B., The In-plane Dynamics of Tyres on Uneven Roads . Vehicle System Dynamics...ADDRESS(ES) Vehicle Terrain performance laboratory,Virginia Tech Mechanical Engineering Department,635 Prices Fork Road - MC 0238,Blacksburg,VA,24061...such that the upper portion is in direct contact with the lower portion and there is a discontinuous and dramatic increase in apparent stiffness). A

Lithofacies, depositional environments, and regional stratigraphy of the lower Eocene Ghazij Formation, Balochistan, Pakistan

USGS Publications Warehouse

Johnson, Edward A.; Warwick, Peter D.; Roberts, Stephen B.; Khan, Intizar H.

1999-01-01

The coal-bearing, lower Eocene Ghazij Formation is exposed intermittently over a distance of 750 kilometers along the western margin of the Axial Belt in north-central Pakistan. Underlying the formation are Jurassic to Paleocene carbonates that were deposited on a marine shelf along the pre- and post-rift northern margin of the Indian subcontinent. Overlying the formation are middle Eocene to Miocene marine and nonmarine deposits capped by Pliocene to Pleistocene collision molasse.The lower part of the Ghazij comprises mostly dark gray calcareous mudrock containing foraminifers and rare tabular to lenticular bodies of very fine grained to finegrained calcareous sandstone. We interpret the lower portion of this part of the Ghazij as outer-shelf deposits, and the upper portion as prodelta deposits. The middle part of the formation conformably overlies the lower part. It comprises medium-gray calcareous mudrock containing nonmarine bivalves, fine- to medium-grained calcareous sandstone, and rare intervals of carbonaceous shale and coal. Sandstone bodies in the middle part, in ascending stratigraphic order, are classified as Type I (coarsening-upward grain size, contain the trace fossil Ophiomorpha, and are commonly overlain by carbonaceous shale or coal), Type II (mixed grain size, display wedge-planar cross stratification, and contain fossil oyster shells and Ophiomorpha), and Type III (finingupward grain size, lenticular shape, erosional bases, and display trough cross stratification). These three types of bodies represent shoreface deposits, tidal channels, and fluvial channels, respectively. Mudrock intervals in the lower portion of this part of the formation contain fossil plant debris and represent estuarine deposits, and mudrock intervals in the upper portion contain fossil root traces and represent overbank deposits. We interpret the middle part of the Ghazij as a lower delta plain sequence. Overlying the middle part of the Ghazij, possibly unconformably, is the upper part of the formation, which comprises calcareous, nonfossiliferous, light-gray, brown, and red-banded mudrock, and rare Type III sandstone bodies. Much of the mudrock in this part of the formation represents multiple paleosol horizons. Locally, a limestone-pebble conglomerate is present in the upper part of the formation, either at the base or occupying most of the sequence. We interpret all but the uppermost portion of the upper part of the Ghazij as an upper delta plain deposit.Thin sections of Ghazij sandstones show mostly fragments of limestone, and heavy-liquid separations reveal the presence of chromite. Paleocurrent data and other evidence indicate a northwestern source area.During earliest Eocene time, the outer edge of the marine shelf off the Indian subcontinent collided with a terrestrial fragment positioned adjacent to, but detached from, the Asian mainland. This collision caused distal carbonateplatform deposits to be uplifted, and an intervening intracratonic sea, the Indus Foreland Basin, was created. Thus for the first time, the depositional slope switched from northwest facing to southeast facing, and a northwestern source for detritus was provided. We conclude that the Ghazij was deposited as a prograding clastic wedge along the northwestern shore of this sea, and that the formation contains sedimentologic evidence of a collisional event that predates the main impact between India and Asia.

Varying properties along lengths of temperature limited heaters

DOEpatents

Vinegar, Harold J [Bellaire, TX; Xie, Xueying [Houston, TX; Miller, David Scott [Katy, TX; Ginestra, Jean Charles [Richmond, TX

2011-07-26

A system for heating a subsurface formation is described. The system includes an elongated heater in an opening in the formation. The elongated heater includes two or more portions along the length of the heater that have different power outputs. At least one portion of the elongated heater includes at least one temperature limited portion with at least one selected temperature at which the portion provides a reduced heat output. The heater is configured to provide heat to the formation with the different power outputs. The heater is configured so that the heater heats one or more portions of the formation at one or more selected heating rates.

Pre-mixing apparatus for a turbine engine

DOEpatents

Lacy, Benjamin Paul [Greer, SC; Varatharajan, Balachandar [Cincinnati, OH; Ziminsky, Willy Steve [Simpsonville, SC; Kraemer, Gilbert Otto [Greer, SC; Yilmaz, Ertan [Albany, NY; Melton, Patrick Benedict [Horse Shoe, NC; Zuo, Baifang [Simpsonville, SC; Stevenson, Christian Xavier [Inman, SC; Felling, David Kenton [Greenville, SC; Uhm, Jong Ho [Simpsonville, SC

2012-04-03

A pre-mixing apparatus for a turbine engine includes a main body having an inlet portion, an outlet portion and an exterior wall that collectively establish at least one fluid delivery plenum, and a plurality of fluid delivery tubes extending through at least a portion of the at least one fluid delivery plenum. Each of the plurality of fluid delivery tubes includes at least one fluid delivery opening fluidly connected to the at least one fluid delivery plenum. With this arrangement, a first fluid is selectively delivered to the at least one fluid delivery plenum, passed through the at least one fluid delivery opening and mixed with a second fluid flowing through the plurality of fluid delivery tubes prior to being combusted in a combustion chamber of a turbine engine.

Operative technique and early experience for robotic-assisted laparoscopic nephroureterectomy (RALNU) using da Vinci Xi.

PubMed

Darwiche, Fadi; Swain, Sanjaya; Kallingal, George; Punnen, Sanoj; Manoharan, Murugesan; Parekh, Dipen J; Gonzalgo, Mark L

2015-01-01

Robotic-assisted laparoscopic nephroureterectomy (RALNU) has been previously utilized for management of upper tract urothelial carcinoma. The da Vinci Xi surgical system was released in April of 2014. We describe our operative technique and early experience for RALNU using the da Vinci Xi system highlighting unique features of this surgical platform. A total of 10 patients with a diagnosis of upper tract urothelial carcinoma underwent RALNU using the da Vinci Xi system between April and November of 2014. A novel, oblique "in line" robotic trocar configuration was utilized to access the upper abdomen (nephrectomy portion) and pelvis (bladder cuff excision) without undocking. The port hopping feature of da Vinci Xi was utilized to facilitate optimal, multi-quadrant visualization during RALNU. Robotic-assisted laparoscopic nephroureterectomy was successfully completed without open conversion in all 10 patients. Mean operative time was 184 min (range 140-300 min), mean estimated blood loss was 121 cc (range 60-300 cc), and mean hospital stay was 2.4 days. Final pathology demonstrated high grade urothelial carcinoma in all patients. Surgical margins were negative in all patients. No intra-operative complications were encountered. One patient developed a pulmonary embolus after being discharged. No patients required a blood transfusion. Mean patient follow-up was 130 days (range 15-210 days). The use of da Vinci Xi with a novel, oblique "in line" port configuration and camera port hopping technique allows for an efficient and reproducible method for RALNU without the need for repositioning the patient or the robot during surgery.

NDE Techniques Used in PARENT Open Round Robin Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, Ryan M.

2014-11-05

This is a draft technical letter report for NRC client describing the NDE techniques used in the open testing portion of the Program to Assess the Reliability of Emerging Nondestructive Techniques (PARENT).

77 FR 28626 - Sunshine Act Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-15

..., Tucson, Arizona 85745. STATUS: This meeting will be open to the public, unless it is necessary for the... governance and (6) personnel matters. PORTIONS OPEN TO THE PUBLIC: All agenda items except as noted below...

39 CFR 7.2 - Open meetings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 39 Postal Service 1 2014-07-01 2014-07-01 false Open meetings. 7.2 Section 7.2 Postal Service... (ARTICLE VII) § 7.2 Open meetings. (a) It is the policy of the United States, established in section 2 of... open to public observation. (b) Except as provided in § 7.3 of these bylaws, every portion of every...

12 CFR 791.15 - Requests for open meeting.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Requests for open meeting. 791.15 Section 791... Sunshine Act § 791.15 Requests for open meeting. (a) Following any announcement that the Board intends to... the Board that the meeting or a portion of the meeting be open. The request shall be circulated to the...

12 CFR 791.15 - Requests for open meeting.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 7 2014-01-01 2014-01-01 false Requests for open meeting. 791.15 Section 791... Sunshine Act § 791.15 Requests for open meeting. (a) Following any announcement that the Board intends to... the Board that the meeting or a portion of the meeting be open. The request shall be circulated to the...

12 CFR 791.15 - Requests for open meeting.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 7 2012-01-01 2012-01-01 false Requests for open meeting. 791.15 Section 791... Sunshine Act § 791.15 Requests for open meeting. (a) Following any announcement that the Board intends to... the Board that the meeting or a portion of the meeting be open. The request shall be circulated to the...

12 CFR 791.15 - Requests for open meeting.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Requests for open meeting. 791.15 Section 791... Sunshine Act § 791.15 Requests for open meeting. (a) Following any announcement that the Board intends to... the Board that the meeting or a portion of the meeting be open. The request shall be circulated to the...

39 CFR 7.2 - Open meetings.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 39 Postal Service 1 2011-07-01 2011-07-01 false Open meetings. 7.2 Section 7.2 Postal Service... (ARTICLE VII) § 7.2 Open meetings. (a) It is the policy of the United States, established in section 2 of... open to public observation. (b) Except as provided in § 7.3 of these bylaws, every portion of every...

39 CFR 7.2 - Open meetings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 39 Postal Service 1 2012-07-01 2012-07-01 false Open meetings. 7.2 Section 7.2 Postal Service... (ARTICLE VII) § 7.2 Open meetings. (a) It is the policy of the United States, established in section 2 of... open to public observation. (b) Except as provided in § 7.3 of these bylaws, every portion of every...

39 CFR 7.2 - Open meetings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Open meetings. 7.2 Section 7.2 Postal Service... (ARTICLE VII) § 7.2 Open meetings. (a) It is the policy of the United States, established in section 2 of... open to public observation. (b) Except as provided in § 7.3 of these bylaws, every portion of every...

39 CFR 7.2 - Open meetings.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 39 Postal Service 1 2013-07-01 2013-07-01 false Open meetings. 7.2 Section 7.2 Postal Service... (ARTICLE VII) § 7.2 Open meetings. (a) It is the policy of the United States, established in section 2 of... open to public observation. (b) Except as provided in § 7.3 of these bylaws, every portion of every...

12 CFR 791.15 - Requests for open meeting.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Requests for open meeting. 791.15 Section 791... Sunshine Act § 791.15 Requests for open meeting. (a) Following any announcement that the Board intends to... the Board that the meeting or a portion of the meeting be open. The request shall be circulated to the...

Non-lead hollow point bullet

DOEpatents

Vaughn, Norman L.; Lowden, Richard A.

2003-04-15

The non-lead hollow point bullet of the instant invention comprises a mixed construction slug further comprising, a monolithic metal insert having a tapered (preferred conical) hollow point tip and a tapered (preferred conical) tail protrusion, and an unsintered powdered metal composite core in tandem alignment with the insert. The core has a hollow tapered (preferred conical) cavity tip portion coupled with the tapered (preferred conical) tail protrusion on the insert. An open tip jacket envelops at least a portion of the insert and the core. The jacket is swaged at the open tip.

Upper extremity access for fenestrated endovascular aortic aneurysm repair is not associated with increased morbidity.

PubMed

Knowles, Martyn; Nation, David A; Timaran, David E; Gomez, Luis F; Baig, M Shadman; Valentine, R James; Timaran, Carlos H

2015-01-01

Fenestrated endovascular aortic aneurysm repair (FEVAR) is an alternative to open repair in patients with complex abdominal aortic aneurysms who are neither fit nor suitable for standard open or endovascular repair. Chimney and snorkel grafts are other endovascular alternatives but frequently require bilateral upper extremity access that has been associated with a 3% to 10% risk of stroke. However, upper extremity access is also frequently required for FEVAR because of the caudal orientation of the visceral vessels. The purpose of this study was to assess the use of upper extremity access for FEVAR and the associated morbidity. During a 5-year period, 148 patients underwent FEVAR, and upper extremity access for FEVAR was used in 98 (66%). Outcomes were compared between those who underwent upper extremity access and those who underwent femoral access alone. The primary end point was a cerebrovascular accident or transient ischemic attack, and the secondary end point was local access site complications. The mean number of fenestrated vessels was 3.07 ± 0.81 (median, 3) for a total of 457 vessels stented. Percutaneous upper extremity access was used in 12 patients (12%) and open access in 86 (88%). All patients who required a sheath size >7F underwent high brachial open access, with the exception of one patient who underwent percutaneous axillary access with a 12F sheath. The mean sheath size was 10.59F ± 2.51F (median, 12F), which was advanced into the descending thoracic aorta, allowing multiple wire and catheter exchanges. One hemorrhagic stroke (one of 98 [1%]) occurred in the upper extremity access group, and one ischemic stroke (one of 54 [2%]) occurred in the femoral-only access group (P = .67). The stroke in the upper extremity access group occurred 5 days after FEVAR and was related to uncontrolled hypertension, whereas the stroke in the femoral group occurred on postoperative day 3. Neither patient had signs or symptoms of a stroke immediately after FEVAR. The right upper extremity was accessed six times without a stroke (0%) compared with the left being accessed 92 times with one stroke (1%; P = .8). Four patients (4%) had local complications related to upper extremity access. One (1%) required exploration for an expanding hematoma after manual compression for a 7F sheath, one (1%) required exploration for hematoma and neurologic symptoms after open access for a 12F sheath, and two patients (2%) with small hematomas did not require intervention. Two (two of 12 [17%]) of these complications were in the percutaneous access group, which were significantly more frequent than in the open group (two of 86 [2%]; P = .02). Upper extremity access appears to be a safe and feasible approach for patients undergoing FEVAR. Open exposure in the upper extremity may be safer than percutaneous access during FEVAR. Unlike chimney and snorkel grafts, upper extremity access during FEVAR is not associated with an increased risk of stroke, despite the need for multiple visceral vessel stenting. Copyright © 2015 Society for Vascular Surgery. All rights reserved.

1. Historic American Buildings Survey E. W. Russell, Photographer, September ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Historic American Buildings Survey E. W. Russell, Photographer, September 2, 1936 UPPER PORTION OF SOUTH FRONT. W. H. ROSS HOME - 602 GOVERNMENT STREET - Ross House, 602 Government Street, Mobile, Mobile County, AL

49 CFR 172.556 - RADIOACTIVE placard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... on the RADIOACTIVE placard must be white in the lower portion with a yellow triangle in the upper... horizontal center line. The symbol, text, class number and inner border must be black. [Amdt. 172-123, 56 FR...

GEMINI-TITAN (GT)-3 - EARTH-SKY VIEWS - CA

NASA Image and Video Library

1965-03-23

S65-18741 (23 March 1965) --- Astronaut John W. Young took this picture during the Gemini-Titan 3 three-orbit mission as the spacecraft "Molly Brown" passed over Northern Mexico. The large light-brown area is the Sonoran Desert. The Colorado River runs from upper right to lower left. The lower portion of the picture is Mexico, the upper left is California, and the upper right is Arizona. The altitude of the spacecraft was 90 miles. Young used a hand-held modified 70mm Hasselblad camera with color film. The lens setting was 250th of a second at f/11.

The Nature of The Propagation of Sea Breeze Fronts in Central California

DTIC Science & Technology

1990-09-01

propagation vector % ith stations in the southern portion of Monterey Bay shows that the front is curved on the mesoscale. 20 Distribution Availabilit of...solar radiation warms the land more than the adjacent water . The resulting temperature contrast produces a slight variation in pressure. The isobaric...surfaces bend upward over the land, producing an upper-level high. The upper-level air flows seaward increasing the surface pressure over the water . The

Cooling circuit for a gas turbine bucket and tip shroud

DOEpatents

Willett, Fred Thomas; Itzel, Gary Michael; Stathopoulos, Dimitrios; Plemmons, Larry Wayne; Plemmons, Helen M.; Lewis, Doyle C.

2002-01-01

An open cooling circuit for a gas turbine bucket wherein the bucket has an airfoil portion, and a tip shroud, the cooling circuit including a plurality of radial cooling holes extending through the airfoil portion and communicating with an enlarged internal area within the tip shroud before exiting the tip shroud such that a cooling medium used to cool the airfoil portion is subsequently used to cool the tip shroud.

Welding shield for coupling heaters

DOEpatents

Menotti, James Louis

2010-03-09

Systems for coupling end portions of two elongated heater portions and methods of using such systems to treat a subsurface formation are described herein. A system may include a holding system configured to hold end portions of the two elongated heater portions so that the end portions are abutted together or located near each other; a shield for enclosing the end portions, and one or more inert gas inlets configured to provide at least one inert gas to flush the system with inert gas during welding of the end portions. The shield may be configured to inhibit oxidation during welding that joins the end portions together. The shield may include a hinged door that, when closed, is configured to at least partially isolate the interior of the shield from the atmosphere. The hinged door, when open, is configured to allow access to the interior of the shield.

Outdoor unit construction for an electric heat pump

DOEpatents

Draper, Robert; Lackey, Robert S.

1984-01-01

The outdoor unit for an electric heat pump is provided with an upper portion 10 containing propeller fan means 14 for drawing air through the lower portion 12 containing refrigerant coil means 16 in the form of four discrete coils connected together in a subassembly forming a W shape, the unit being provided with four adjustable legs 64 which are retracted in shipment, and are adjusted on site to elevate the unit to a particular height suitable for the particular location in which the unit is installed.

Outdoor unit construction for an electric heat pump

DOEpatents

Draper, R.; Lackey, R.S.

1984-09-11

The outdoor unit for an electric heat pump is provided with an upper portion containing propeller fan means for drawing air through the lower portion containing refrigerant coil means in the form of four discrete coils connected together in a subassembly forming a W shape, the unit being provided with four adjustable legs which are retracted in shipment, and are adjusted on site to elevate the unit to a particular height suitable for the particular location in which the unit is installed. 4 figs.

A comparison of satellite systems for gravity field measurements

NASA Technical Reports Server (NTRS)

Argentiero, P. D.; Lowrey, B. E.

1977-01-01

A detailed and accurate earth gravity field model is important to the understanding of the structure and composition of the earth's crust and upper mantle. Various satellite-based techniques for providing more accurate models of the gravity field are analyzed and compared. A high-low configuration satellite-to-satellite tracking mission is recommended for the determination of both the long wavelength and short wavelength portions of the field. Satellite altimetry and satellite gradiometry missions are recommended for determination of the short wavelength portion of the field.

A scheme for parameterizing cirrus cloud ice water content in general circulation models

NASA Technical Reports Server (NTRS)

Heymsfield, Andrew J.; Donner, Leo J.

1990-01-01

Clouds strongly influence th earth's energy budget. They control th amount of solar radiative energy absorbed by the climate system, partitioning the energy between the atmosphere and the earth's surface. They also control the loss of energy to space by their effect on thermal emission. Cirrus and altostratus are the most frequent cloud types, having an annual average global coverage of 35 and 40 percent, respectively. Cirrus is composed almost entirely of ice crystals and the same is frequently true of the upper portions of altostratus since they are often formed by the thickening of cirrostratus and by the spreading of the middle or upper portions of thunderstorms. Thus, since ice clouds cover such a large portion of the earth's surface, they almost certainly have an important effect on climate. With this recognition, researchers developing climate models are seeking largely unavailable methods for specifying the conditions for ice cloud formation, and quantifying the spatial distribution of ice water content, IWC, a necessary step in deriving their radiative characteristics since radiative properties are apparently related to IWC. A method is developed for specifying IWC in climate models, based on theory and measurements in cirrus during FIRE and other experiments.

Determination of fracture toughness of human permanent and primary enamel using an indentation microfracture method.

PubMed

Hayashi-Sakai, Sachiko; Sakai, Jun; Sakamoto, Makoto; Endo, Hideaki

2012-09-01

The purpose of the present study was to examine the fracture toughness and Vickers microhardness number of permanent and primary human enamel using the indentation microfracture method. Crack resistance and a parameter indirectly related to fracture toughness were measured in 48 enamel specimens from 16 permanent teeth and 12 enamel specimens obtained from six primary teeth. The Vickers microhardness number of the middle portion was greater than the upper portion in primary enamel. The fracture toughness was highest in the middle portion of permanent enamel, because fracture toughness greatly depends upon microstructure. These findings suggest that primary teeth are not miniature permanent teeth but have specific and characteristic mechanical properties.

Capture-ejector satellites

NASA Technical Reports Server (NTRS)

Macconochie, I. O.; Eldred, C. H.; Martin, J. A.

1983-01-01

A satellite in the form of a large rotating rim which can be used to boost spacecraft from low-Earth orbit to higher orbits is described. The rim rotates in the plane of its orbit such that the lower portion of the rim is traveling at suborbital velocity, while the upper portion is travelling at greater than orbital velocity. Ascending spacecraft or payloads arrive at the lowest portion of the rim at suborbital velocities, where the payloads are released on a trajectory for higher orbits; descending payloads employ the reverse procedure. Electric thrusters placed on the rim maintain rim rotational speed and altitude. From the standpoint of currently known materials, the capture-ejector concept may be useful for relatively small velocity increments.

Sidewall tensiometer and method of determining soil moisture potential in below-grade earthen soil

DOEpatents

Hubbell, Joel M.; Sisson, James B.

2001-01-01

A sidewall tensiometer to in situ determine below-grade soil moisture potential of earthen soil includes, a) a body adapted for insertion into an opening in earthen soil below grade, the body having lateral sidewalls; b) a laterally oriented porous material provided relative to the body lateral sidewalls, the laterally oriented porous material at least in part defining a fluid chamber within the body; c) a pressure a sensor in fluid communication with the fluid chamber; and d) sidewall engaging means for engaging a portion of a sidewall of an earth opening to laterally urge the porous material into hydraulic communication with earthen soil of another portion of the opening sidewall. Methods of taking tensiometric measurements are also disclosed.

Recovery of cesium

DOEpatents

Izatt, Reed M.; Christensen, James J.; Hawkins, Richard T.

1984-01-01

A process of recovering cesium ions from mixtures of ions containing them and other ions, e.g., a solution of nuclear waste materials, which comprises establishing a separate source phase containing such a mixture of ions, establishing a separate recipient phase, establishing a liquid membrane phase in interfacial contact with said source and recipient phases, said membrane phase containing a ligand, preferably a selected calixarene as depicted in the drawing, maintaining said interfacial contact for a period of time long enough to transport by said ligand a substantial portion of the cesium ion from the source phase to the recipient phase, and recovering the cesium ion from the recipient phase. The separation of the source and recipient phases may be by the membrane phase only, e.g., where these aqueous phases are emulsified as dispersed phases in a continuous membrane phase, or may include a physical barrier as well, e.g., an open-top outer container with an inner open-ended container of smaller cross-section mounted in the outer container with its open bottom end spaced from and above the closed bottom of the outer container so that the membrane phase may fill the outer container to a level above the bottom of the inner container and have floating on its upper surface a source phase and a recipient phase separated by the wall of the inner container as a physical barrier. A preferred solvent for the ligand is a mixture of methylene chloride and carbon tetrachloride.

Evidence for a Nascent Rift in South Sudan: Westward Extension of the East African Rift System?

NASA Astrophysics Data System (ADS)

Maceira, M.; Van Wijk, J. W.; Coblentz, D. D.; Modrak, R. T.

2013-12-01

Joint inversion of seismic and gravity data of eastern Africa reveals a low seismic wave velocity arm stretching from the southern Main Ethiopian rift westward in an east-west direction that has not been noticed in earlier work. The zone of low velocities is located in the upper mantle and is not overlain by a known structural rift expression. We analyzed the local pattern of seismicity and the stresses in the African plate to interpret this low velocity arm. The zone of low velocities is located within the Central African Fold Belt, which dissects the northern and southern portions of the African continent. It is seismically active with small to intermediate sized earthquakes occurring in the crust. Seven earthquake solutions indicate (oblique) normal faulting and low-angle normal faulting with a NS to NNW-SSE opening direction, as well as strike-slip faulting. This pattern of deformation is typically associated with rifting. The present day stress field in northeastern Africa reveals a tensional state of stress at the location of the low velocity arm with an opening direction that corresponds to the earthquake data. We propose that the South Sudan low velocity zone and seismic center are part of an undeveloped, nascent rift arm. The arm stretches from the East African Rift system westward.

7 CFR 201.39 - General procedure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... hand into the bulk and withdrawing representative portions. The hand is inserted in an open position and the fingers are held closely together while the hand is being inserted and the portion withdrawn... bag, the handfuls shall be taken from well-separated points. (b) For free-flowing seed in bags or bulk...

7 CFR 201.39 - General procedure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... hand into the bulk and withdrawing representative portions. The hand is inserted in an open position and the fingers are held closely together while the hand is being inserted and the portion withdrawn... bag, the handfuls shall be taken from well-separated points. (b) For free-flowing seed in bags or bulk...

12 CFR 261b.4 - Meetings open to public observation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Meetings open to public observation. 261b.4... RESERVE SYSTEM (CONTINUED) RULES REGARDING PUBLIC OBSERVATION OF MEETINGS § 261b.4 Meetings open to public observation. (a) Except as provided in § 261b.5, every portion of every meeting of the agency shall be open to...

12 CFR 261b.4 - Meetings open to public observation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Meetings open to public observation. 261b.4... RESERVE SYSTEM RULES REGARDING PUBLIC OBSERVATION OF MEETINGS § 261b.4 Meetings open to public observation. (a) Except as provided in § 261b.5, every portion of every meeting of the agency shall be open to...

12 CFR 261b.4 - Meetings open to public observation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Meetings open to public observation. 261b.4... RESERVE SYSTEM (CONTINUED) RULES REGARDING PUBLIC OBSERVATION OF MEETINGS § 261b.4 Meetings open to public observation. (a) Except as provided in § 261b.5, every portion of every meeting of the agency shall be open to...

12 CFR 261b.4 - Meetings open to public observation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 4 2012-01-01 2012-01-01 false Meetings open to public observation. 261b.4... RESERVE SYSTEM (CONTINUED) RULES REGARDING PUBLIC OBSERVATION OF MEETINGS § 261b.4 Meetings open to public observation. (a) Except as provided in § 261b.5, every portion of every meeting of the agency shall be open to...

12 CFR 261b.4 - Meetings open to public observation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Meetings open to public observation. 261b.4... RESERVE SYSTEM RULES REGARDING PUBLIC OBSERVATION OF MEETINGS § 261b.4 Meetings open to public observation. (a) Except as provided in § 261b.5, every portion of every meeting of the agency shall be open to...

KSC-2009-1724

NASA Image and Video Library

2009-02-19

VANDENBERG AIR FORCE BASE, Calif. -- With the fairing door off, Orbital Sciences' Glenn Weigle and Brett Gladish take the GN2 flow reading on NASA's Orbiting Carbon Observatory, or OCO, spacecraft on Launch Complex 576-E at Vandenberg Air Force Base in California. The encapsulated OCO tops Orbital Sciences' Taurus XL rocket, which is scheduled to launch Feb. 24. The spacecraft sits atop Orbital Sciences' Taurus XL rocket. At right is a portion of the umbilical tower attached to the upper stack. The spacecraft sits atop Orbital Sciences' Taurus XL rocket. At right is a portion of the umbilical tower attached to the upper stack. The spacecraft will collect precise global measurements of carbon dioxide (CO2) in the Earth's atmosphere. Scientists will analyze OCO data to improve our understanding of the natural processes and human activities that regulate the abundance and distribution of this important greenhouse gas. Photo courtesy of Jim Stowers, Orbital Sciences

KSC-2009-1725

NASA Image and Video Library

2009-02-19

VANDENBERG AIR FORCE BASE, Calif. -- With the fairing door off, Orbital Sciences' Glenn Weigle and Brett Gladish maneuver into position to take the GN2 flow reading from NASA's Orbiting Carbon Observatory, or OCO, spacecraft. At left, Jose Castillo and Mark Neuse stand by to replace the fairing door when the OCO operation is complete. The spacecraft sits atop Orbital Sciences' Taurus XL rocket. At right is a portion of the umbilical tower attached to the upper stack. The spacecraft sits atop Orbital Sciences' Taurus XL rocket. At right is a portion of the umbilical tower attached to the upper stack. The spacecraft will collect precise global measurements of carbon dioxide (CO2) in the Earth's atmosphere. Scientists will analyze OCO data to improve our understanding of the natural processes and human activities that regulate the abundance and distribution of this important greenhouse gas. Photo courtesy of Jim Stowers, Orbital Sciences

Oyster-bioimmured ammonites from the Upper Albian of Annopol, Poland: stratigraphic and palaeobiogeographic implications

NASA Astrophysics Data System (ADS)

Machalski, Marcin; Kennedy, William J.

2013-12-01

Machalski, M. and Kennedy, W.J. 2013. Oyster-bioimmured ammonites from the Upper Albian of Annopol, Poland: stratigraphic and palaeobiogeographic implications. Acta Geologica Polonica, 63 (4), 545-554. Warszawa. Ammonites Mortoniceras (Subschloenbachia) sp. are preserved as attachment scars on the oyster shells from the topmost portion of the Albian succession at Annopol, Poland. These oyster-bioimmured ammonites show a closest affinity to the representatives of Mortoniceras (Subschloenbachia) characteristic of the upper Upper Albian Mortoniceras perinflatum Zone. No ammonites indicative of the uppermost Albian-lowermost Cenomanian Praeschloenbachia briacensis Zone are recorded. Thus, the hiatus at the Albian-Cenomanian boundary at Annopol embraces the latter zone. The presence (and dominance) of Mortoniceras in the upper Upper Albian ammonite assemblage of Annopol suggests that the representatives of this Tethyan genus could migrate into the epicratonic areas of Poland directly from the Tethyan Realm, via the Lwow (Lviv) region.

Fluid lubricated bearing assembly

DOEpatents

Boorse, Henry A.; Boeker, Gilbert F.; Menke, John R.

1976-01-01

1. A support for a loaded rotatable shaft comprising in combination on a housing having a fluid-tight cavity encasing an end portion of said shaft, a thrust bearing near the open end of said cavity for supporting the axial thrust of said shaft, said thrust bearing comprising a thrust plate mounted in said housing and a thrust collar mounted on said shaft, said thrust plate having a central opening the peripheral portion of which is hermetically sealed to said housing at the open end of said cavity, and means for supplying a fluid lubricant to said thrust bearing, said thrust bearing having a lubricant-conducting path connecting said lubricant supplying means with the space between said thrust plate and collar intermediate the peripheries thereof, the surfaces of said plate and collar being constructed and arranged to inhibit radial flow of lubricant and, on rotation of said thrust collar, to draw lubricant through said path between the bearing surfaces and to increase the pressure therebetween and in said cavity and thereby exert a supporting force on said end portion of said shaft.

Successful treatment of a 14-year-old patient with intestinal malrotation with laparoscopic Ladd procedure: case report and literature review

PubMed Central

2013-01-01

Midgut malrotation is an anomaly of intestinal rotation that occurs during fetal development and usually presents in the neonatal period. We present a rare case of malrotation in a 14-year-old patient who presented with cramping, generalized right abdominal pain, and vomiting for a duration of one day. A computed tomography abdominal scan and upper gastrointestinal contrast studies showed malrotation of the small bowel without volvulus. Laparoscopy revealed typical Ladd’s bands and a distended flabby third and fourth duodenal portion extrinsically obstructing the misplaced duodeno-jejunal junction. The Ladd procedure, including widening of the mesenteric base and appendectomy, was performed. Symptoms completely resolved in a half-year follow up period. Patients with midgut malrotation may present with vague abdominal pain, intestinal obstruction, or intestinal ischemia. The laparoscopic Ladd procedure is feasible and safe, and it appears to be as effective as the standard open Ladd procedure in the diagnosis and treatment of teenage or adult patients with intestinal malrotation. PMID:23684081

SLS Resource Reel Aug 2016 orig

NASA Image and Video Library

2016-07-04

Space Launch System Resource Reel Description: This video includes launch animation of NASA’s Space Launch System (SLS), as well as work taking place across NASA centers and the country to build and test the various components that make up the rocket including: the 5-segment solid rocket boosters, the RS-25 rocket engines, the massive tanks that make up the Core Stage of the rocket that fuels the RS-25 engines, and upper portions of the rocket that connect the interim cryogenic propulsion stage to the Orion spacecraft. SLS, is an advanced launch vehicle for a new era of exploration beyond Earth’s orbit into deep space. SLS, the world’s most powerful rocket, will launch astronauts in the agency’s Orion spacecraft on missions to an asteroid and eventually to Mars, while opening new possibilities for other payloads including robotic scientific missions to places like Mars, Saturn and Jupiter. Graphic Information: PAO Name:Kim Henry Phone Number:256-544-1899 Email Address: kimberly.m.henry@nasa.gov

The Last Step in Cocaine Biosynthesis Is Catalyzed by a BAHD Acyltransferase[OPEN

PubMed Central

Schmidt, Gregor Wolfgang; Porta, Tiffany; Reichelt, Michael; Luck, Katrin; Torre, José Carlos Pardo; Dolke, Franziska; Varesio, Emmanuel; Hopfgartner, Gérard; Gershenzon, Jonathan

2015-01-01

The esterification of methylecgonine (2-carbomethoxy-3β-tropine) with benzoic acid is the final step in the biosynthetic pathway leading to the production of cocaine in Erythoxylum coca. Here we report the identification of a member of the BAHD family of plant acyltransferases as cocaine synthase. The enzyme is capable of producing both cocaine and cinnamoylcocaine via the activated benzoyl- or cinnamoyl-Coenzyme A thioesters, respectively. Cocaine synthase activity is highest in young developing leaves, especially in the palisade parenchyma and spongy mesophyll. These data correlate well with the tissue distribution pattern of cocaine as visualized with antibodies. Matrix-assisted laser-desorption ionization mass spectral imaging revealed that cocaine and cinnamoylcocaine are differently distributed on the upper versus lower leaf surfaces. Our findings provide further evidence that tropane alkaloid biosynthesis in the Erythroxylaceae occurs in the above-ground portions of the plant in contrast with the Solanaceae, in which tropane alkaloid biosynthesis occurs in the roots. PMID:25406120

The Origin of Mucosal Immunity: Lessons from the Holobiont Hydra

PubMed Central

Schröder, Katja

2016-01-01

ABSTRACT Historically, mucosal immunity—i.e., the portion of the immune system that protects an organism’s various mucous membranes from invasion by potentially pathogenic microbes—has been studied in single-cell epithelia in the gastrointestinal and upper respiratory tracts of vertebrates. Phylogenetically, mucosal surfaces appeared for the first time about 560 million years ago in members of the phylum Cnidaria. There are remarkable similarities and shared functions of mucosal immunity in vertebrates and innate immunity in cnidarians, such as Hydra species. Here, we propose a common origin for both systems and review observations that indicate that the ultimately simple holobiont Hydra provides both a new perspective on the relationship between bacteria and animal cells and a new prism for viewing the emergence and evolution of epithelial tissue-based innate immunity. In addition, recent breakthroughs in our understanding of immune responses in Hydra polyps reared under defined short-term gnotobiotic conditions open up the potential of Hydra as an animal research model for the study of common mucosal disorders. PMID:27803185

Geohydrology and Water Quality of the Valley-Fill Aquifer System in the Upper Sixmile Creek and West Branch Owego Creek Valleys in the Town of Caroline, Tompkins County, New York

USGS Publications Warehouse

Miller, Todd S.

2009-01-01

In 2002, the U.S. Geological Survey, in cooperation with the Town of Caroline and Tompkins County Planning Department, began a study of the valley-fill aquifer system in upper Sixmile Creek and headwaters of West Branch Owego Creek valleys in the Town of Caroline, NY. The purpose of the study is to provide geohydrologic data to county and town planners as they develop a strategy to manage and protect their water resources. The first aquifer reach investigated in this series is in the Town of Caroline and includes the upper Sixmile Creek valley and part of West Branch Owego Creek valley. The portions of the valley-fill aquifer system that are comprised of saturated coarse-grained sediments including medium to coarse sand and sandy gravel form the major aquifers. Confined sand and gravel units form the major aquifers in the western and central portions of the upper Sixmile Creek valley, and an unconfined sand and gravel unit forms the major aquifer in the eastern portion of the upper Sixmile Creek valley and in the headwaters of the West Branch Owego Creek valley. The valley-fill deposits are thinnest near the edges of the valley where they pinch out along the till-mantled bedrock valley walls. The thickness of the valley fill in the deepest part of the valley, at the western end of the study area, is about 100 feet (ft); the thickness is greater than 165 ft on top of the Valley Heads Moraine in the central part of the valley. An estimated 750 people live over and rely on groundwater from the valley-fill aquifers in upper Sixmile Creek and West Branch Owego Creek valleys. Most groundwater withdrawn from the valley-fill aquifers is pumped from wells with open-ended 6-inch diameter casings; the remaining withdrawals are from shallow dug wells or cisterns that collect groundwater that discharges to springs (especially in the Brooktondale area). The valley-fill aquifers are the sources of water for about 200 households, several apartment complexes, two mobile home parks, a school, and several farms and small businesses. Most groundwater that is withdrawn from pumped wells is returned to the groundwater system via septic systems. Groundwater in the upper and basal confined aquifers in the upper Sixmile Creek valley is under artesian conditions everywhere except where the water discharges to springs along bluffs in the western end of the Sixmile Creek valley. Principal sources of recharge to the confined aquifers are (1) the sides of the valley where the confined aquifers may extend up along the flank of the bedrock valley wall and crop out at land surface or are overlain and in contact with surficial coarse-grained deltaic and fluvial sediments that provide a pathway through which direct precipitation and seepage losses from tributary streams can reach the buried aquifers, or (2) where the buried aquifers are isolated and receive recharge only from adjacent fine-grained sediment and bedrock. The base-flow and runoff components of total streamflow at two streamgages, Sixmile Creek at Brooktondale and Sixmile Creek at Bethel Grove, were calculated using hydrograph-separation techniques from 2003 to 2007 discharge records. Base flow constituted 64 and 56 percent of the total annual flow at the Brooktondale and Bethel Grove streamgages, respectively. Water-quality samples were collected from 2003 to 2005, with 10 surface-water samples collected seasonally during base-flow conditions at the Sixmile Creek at Brooktondale streamgage, and 12 samples were collected during base-flow conditions at several selected tributaries from 2004 to 2005. The predominant cation detected in the surface-water samples was calcium, but moderate amounts of magnesium, silica, and sodium were also detected; the major anions were bicarbonate, chloride, and sulfate. Sodium and chloride concentrations were relatively low in all samples but increased downstream from the Sixmile Creek sampling site at Six Hundred Road near Slaterville Springs, NY, to B

Inter-subunit interactions across the upper voltage sensing-pore domain interface contribute to the concerted pore opening transition of Kv channels.

PubMed

Shem-Ad, Tzilhav; Irit, Orr; Yifrach, Ofer

2013-01-01

The tight electro-mechanical coupling between the voltage-sensing and pore domains of Kv channels lies at the heart of their fundamental roles in electrical signaling. Structural data have identified two voltage sensor pore inter-domain interaction surfaces, thus providing a framework to explain the molecular basis for the tight coupling of these domains. While the contribution of the intra-subunit lower domain interface to the electro-mechanical coupling that underlies channel opening is relatively well understood, the contribution of the inter-subunit upper interface to channel gating is not yet clear. Relying on energy perturbation and thermodynamic coupling analyses of tandem-dimeric Shaker Kv channels, we show that mutation of upper interface residues from both sides of the voltage sensor-pore domain interface stabilizes the closed channel state. These mutations, however, do not affect slow inactivation gating. We, moreover, find that upper interface residues form a network of state-dependent interactions that stabilize the open channel state. Finally, we note that the observed residue interaction network does not change during slow inactivation gating. The upper voltage sensing-pore interaction surface thus only undergoes conformational rearrangements during channel activation gating. We suggest that inter-subunit interactions across the upper domain interface mediate allosteric communication between channel subunits that contributes to the concerted nature of the late pore opening transition of Kv channels.

Magnetohydrodynamic (MHD) channel corner seal

DOEpatents

Spurrier, Francis R.

1980-01-01

A corner seal for an MHD duct includes a compressible portion which contacts the duct walls and an insulating portion which contacts the electrodes, sidewall bars and insulators. The compressible portion may be a pneumatic or hydraulic gasket or an open-cell foam rubber. The insulating portion is segmented into a plurality of pieces of the same thickness as the electrodes, insulators and sidewall bars and aligned therewith, the pieces aligned with the insulator being of a different size from the pieces aligned with the electrodes and sidewall bars to create a stepped configuration along the corners of the MHD channel.

Effects of Lily Pads on Evaporation

NASA Astrophysics Data System (ADS)

Cooley, Keith R.; Idso, Sherwood B.

1980-06-01

Measurements of evaporation from open water and water partially covered by lily pads have indicated that for the portion of the surface area covered by lily pads, evaporation is reduced to about 84% of that occurring from open water.

Drilling fluid filter

DOEpatents

Hall, David R.; Fox, Joe; Garner, Kory

2007-01-23

A drilling fluid filter for placement within a bore wall of a tubular drill string component comprises a perforated receptacle with an open end and a closed end. A hanger for engagement with the bore wall is mounted at the open end of the perforated receptacle. A mandrel is adjacent and attached to the open end of the perforated receptacle. A linkage connects the mandrel to the hanger. The linkage may be selected from the group consisting of struts, articulated struts and cams. The mandrel operates on the hanger through the linkage to engage and disengage the drilling fluid filter from the tubular drill string component. The mandrel may have a stationary portion comprising a first attachment to the open end of the perforated receptacle and a telescoping adjustable portion comprising a second attachment to the linkage. The mandrel may also comprise a top-hole interface for top-hole equipment.

28 CFR 50.9 - Policy with regard to open judicial proceedings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... § 50.9 Policy with regard to open judicial proceedings. Because of the vital public interest in open... of justice. In furtherance of the Department's concern for the right of the public to attend judicial..., sentencing proceedings, or portions thereof, except as indicated in paragraph (e) of this section. (b) A...

Hang Them High: A Hands-Free Technique for Upper Extremity Limb Holding During Surgical Preparation.

PubMed

Aneja, Arun; Leung, Patrick; Marquez-Lara, Alejandro

Lifting and holding upper and lower limbs during the "prep and drape" portion of certain orthopaedic procedures exert strong forces on the holder and may lead to musculoskeletal disorders. To address these challenges during upper extremity procedures, this article describes a hand-free elevation and traction technique of the upper limbs during preoperative skin preparation with the use of items readily available within the operating room (OR). This technique is particularly useful for heavy or fractured limbs that may impose a physical challenge to lift and maintain in a stable position. Implementation of this technique reduces the risk to nurses, OR personnel, and caregivers of developing work-related musculoskeletal injuries while lifting and holding limbs in the orthopaedic OR.

Visuotopic organization of the cebus pulvinar: a double representation the contralateral hemifield.

PubMed

Gattass, R; Oswaldo-Cruz, E; Sousa, A P

1978-08-18

The projection of the visual field in the pulvinar nucleus was studied in 17 Cebus monkeys using electrophysiological techniques. Visual space is represented in two regions of the pulvinar; (1) the ventrolateral group, Pvlg, comprising nuclei P delta, P delta, P gamma, P eta and P mu 1; and (2) P mu. In the first group, which corresponds to the pulvinar inferior and ventral part of the pulvinar lateralis, we observed a greater respresentation of the central part of the visual field. Approximately 58% of the volume of the ventrolateral group is concerned with the visual space within 10 degrees of the fovea. This portion of the visual field is represented at its lateral aspects, mainly close to the level of the caudal pole of the lateral geniculate nucleus (LGN). Projection of the vertical meridian runs along its lateral border while that of the horizontal one is found running from the dorsal third of the LGN's hilus to the medial border of the ventro-lateral group. The lower quadrant is represented at its dorsal portion while the upper quadrant is represented at the ventral one. In Pmu the representation is rotated 90 degrees clockwise around the rostrocaudal axis: the vertical meridian is found at the ventromedial border of this nucleus. Thus, the lower quadrant is represented at the later portion of Pmu and the upper at its medial portion. Both projections are restricted to the contralateral hemifield.

Nuclear reactor sealing system

DOEpatents

McEdwards, James A.

1983-01-01

A liquid metal-cooled nuclear reactor sealing system. The nuclear reactor includes a vessel sealed at its upper end by a closure head. The closure head comprises at least two components, one of which is rotatable; and the two components define an annulus therebetween. The sealing system includes at least a first and second inflatable seal disposed in series in an upper portion of the annulus. The system further includes a dip seal extending into a body of insulation located adjacent a bottom portion of the closure head. The dip seal comprises a trough formed by a lower portion of one of the components, and a seal blade pendently supported from the other component and extending downwardly into the trough. A body of liquid metal is contained in the trough which submerges a portion of the seal blade. The seal blade is provided with at least one aperture located above the body of liquid metal for providing fluid communication between the annulus intermediate the dip seal and the inflatable seals, and a body of cover gas located inside the vessel. There also is provided means for introducing a purge gas into the annulus intermediate the inflatable seals and the seal blade. The purge gas is introduced in an amount sufficient to substantially reduce diffusion of radioactive cover gas or sodium vapor up to the inflatable seals. The purge gas mixes with the cover gas in the reactor vessel where it can be withdrawn from the vessel for treatment and recycle to the vessel.

Triptych of the Moon

NASA Image and Video Library

1999-09-10

This composite image was made from NASA Cassini which captured a significant portion of the Moon during a Moon flyby imaging sequence.All three images have been scaled so that the brightness of Crisium basin, the dark circular region in the upper right,

Why and Where do Large Shallow Slab Earthquakes Occur?

NASA Astrophysics Data System (ADS)

Seno, T.; Yoshida, M.

2001-12-01

Within a shallow portion (20-60 km depth) of subducting slabs, it has been believed that large earthquakes seldom occur because the differential stress is generally expected to be low between bending at the trench-outer rise and unbending at the intermediate-depth. However, there are several regions in which large ( M>=7.0 ) earthquakes, including three events early in this year, have occurred in this portion. Searching such events from published individual studies and Harvard University centroid moment tensor catalogue, we find nineteen events in eastern Hokkaido, Kyushu-SW Japan, Mariana, Manila, Sumatra, Vanuatu, Chile, Peru, El Salvador, Mexico, and Cascadia. Slab stresses revealed from the mechanism solutions of those large events and smaller events are tensional in a slab dip direction. However, ages of the subducting oceanic plates are generally young, which denies a possibility that the slab pull works as a cause. Except for Manila and Sumatra, the stresses in the overriding plates are characterized by the change in {σ }Hmax direction from arc-parallel in the back-arc to arc-perpendicular in the fore-arc, which implies that a horizontal stress gradient exists in the across-arc direction. Peru and Chile, where the back-arc is compressional, can be categorized into this type, because a horizontal stress gradient exists over the continent from tension in east to compression in the west. In these regions, it is expected that mantle drag forces are operating beneath the upper plates, which drive the upper plates to the trenchward overriding the subducting oceanic plates. Assuming that the mantle drag forces beneath the upper plates originate from the mantle convection currents or upwelling plumes, we infer that the upper plates driven by the convection suck the oceanic plates, making the shallow portion of the slabs in extra-tension, thus resulting in the large shallow slab earthquakes in this tectonic regime.

Open cycle ocean thermal energy conversion system structure

DOEpatents

Wittig, J. Michael

1980-01-01

A generally mushroom-shaped, open cycle OTEC system and distilled water producer which has a skirt-conduit structure extending from the enlarged portion of the mushroom to the ocean. The enlarged part of the mushroom houses a toroidal casing flash evaporator which produces steam which expands through a vertical rotor turbine, partially situated in the center of the blossom portion and partially situated in the mushroom's stem portion. Upon expansion through the turbine, the motive steam enters a shell and tube condenser annularly disposed about the rotor axis and axially situated beneath the turbine in the stem portion. Relatively warm ocean water is circulated up through the radially outer skirt-conduit structure entering the evaporator through a radially outer portion thereof, flashing a portion thereof into motive steam, and draining the unflashed portion from the evaporator through a radially inner skirt-conduit structure. Relatively cold cooling water enters the annular condenser through the radially inner edge and travels radially outwardly into a channel situated along the radially outer edge of the condenser. The channel is also included in the radially inner skirt-conduit structure. The cooling water is segregated from the potable, motive steam condensate which can be used for human consumption or other processes requiring high purity water. The expansion energy of the motive steam is partially converted into rotational mechanical energy of the turbine rotor when the steam is expanded through the shaft attached blades. Such mechanical energy drives a generator also included in the enlarged mushroom portion for producing electrical energy. Such power generation equipment arrangement provides a compact power system from which additional benefits may be obtained by fabricating the enclosing equipment, housings and component casings from low density materials, such as prestressed concrete, to permit those casings and housings to also function as a floating support vessel.

78 FR 70358 - Sunshine Act Meeting Notice-December 12, 2013 Board of Directors Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-25

... OVERSEAS PRIVATE INVESTMENT CORPORATION Sunshine Act Meeting Notice--December 12, 2013 Board of Directors Meeting TIME AND DATE: Thursday, December 12, 2013, 2 p.m. (OPEN Portion), 2:15 p.m. (CLOSED Portion). PLACE: Offices of the Corporation, Twelfth Floor Board Room, 1100 New York Avenue NW...

RECREATION OF C. 1913 PHOTOGRAPH “VIEW OF THE SOUTHERN PORTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

RECREATION OF C. 1913 PHOTOGRAPH “VIEW OF THE SOUTHERN PORTION OF THE GROUNDS” (SEE FIGURE 7 IN HISTORICAL REPORT FOR HISTORIC VIEW). NOTE THAT THE FORMERLY OPEN VISTA TO THE POTOMAC RIVER IS NOW BLOCKED BY MATURE TREES. - Congressional Cemetery, 1801 E Street, Southeast, Washington, District of Columbia, DC

22 CFR 1004.6 - Procedures for closing meetings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... portions of a series of meetings may be closed to public observation for any of the reasons provided in... meetings remain open. A single vote may be taken with respect to a series of meetings, a portion or... such series of meetings, so long as each meeting in such series involves the same particular matters...

22 CFR 1004.6 - Procedures for closing meetings.

Code of Federal Regulations, 2014 CFR

2014-04-01

... portions of a series of meetings may be closed to public observation for any of the reasons provided in... meetings remain open. A single vote may be taken with respect to a series of meetings, a portion or... such series of meetings, so long as each meeting in such series involves the same particular matters...

22 CFR 1004.6 - Procedures for closing meetings.

Code of Federal Regulations, 2013 CFR

2013-04-01

... portions of a series of meetings may be closed to public observation for any of the reasons provided in... meetings remain open. A single vote may be taken with respect to a series of meetings, a portion or... such series of meetings, so long as each meeting in such series involves the same particular matters...

22 CFR 1004.6 - Procedures for closing meetings.

Code of Federal Regulations, 2012 CFR

2012-04-01

... portions of a series of meetings may be closed to public observation for any of the reasons provided in... meetings remain open. A single vote may be taken with respect to a series of meetings, a portion or... such series of meetings, so long as each meeting in such series involves the same particular matters...

22 CFR 1004.6 - Procedures for closing meetings.

Code of Federal Regulations, 2011 CFR

2011-04-01

... portions of a series of meetings may be closed to public observation for any of the reasons provided in... meetings remain open. A single vote may be taken with respect to a series of meetings, a portion or... such series of meetings, so long as each meeting in such series involves the same particular matters...

9. EXTERIOR OF ENCLOSED PORTION OF SECOND FLOOR WEST SIDE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. EXTERIOR OF ENCLOSED PORTION OF SECOND FLOOR WEST SIDE APARTMENT ENTRYWAY SHOWING STAIR LANDING AND OPEN FRONT DOOR FLANKED BY PAIRED 4-LIGHT OVER 4-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS. VIEW TO NORTHEAST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

Continental Affinities of the Alpha Ridge

NASA Astrophysics Data System (ADS)

Jackson, H. Ruth; Li, Qingmou; Shimeld, John; Chian, Deping

2017-04-01

Identifying the crustal attributes of the Alpha Ridge (AR) part of the High Arctic Large Igneous Province and tracing the spreading centre across the Amerasia Basin plays a key role in understanding the opening history of the Arctic Ocean. In this approach, we report the evidence for a continental influence on the development of the AR and reduced ocean crust in the Amerasia Basin. These points are inferred from a documented continental sedimentation source in the Amerasia Basin and calculated diagnostic compressional and shear refraction waves, and from the tracing of the distinct spreading centre using the potential field data. (1) The circum-Arctic geology of the small polar ocean provides compelling evidence of a long-lived continental landmass north of the Sverdrup Basin in the Canadian Arctic Islands and north of the Barents Sea continental margin. Based on sediment distribution patterns in the Sverdrup Basin a continental source is required from the Triassic to mid Jurassic. In addition, an extensive continental sediment source to the north of the Barents Sea is required until the Barremian. (2) Offshore data suggest a portion of continental crust in the Alpha and Mendeleev ridges including measured shear wave velocities, similarity of compressional wave velocities with large igneous province with continental fragments and magnetic patterns. Ocean bottom seismometers recorded shear waves velocities that are sensitive to the quartz content of rocks across the Chukchi Borderland and the Mendeleev Ridge that are diagnostic of both an upper and lower continental crust. On the Nautilus Spur of the Alpha Ridge expendable sonobuoys recorded clear converted shear waves also consistent with continental crust. The magnetic patterns (amplitude, frequency, and textures) on the Northwind Ridge and the Nautilus Spur also have similarities. In fact only limited portions of the deepest water portions of the Canada Basin and the Makarov Basin have typical oceanic layer 2 and 3 crustal velocities and lineated magnetic anomalies. (3) The gravity and magnetic anomalies associated with the spreading centre in the Canada Basin unveiled by multifractal singularity analysis of the potential field data can now be traced as far as the Lomonosov Ridge. In addition, linear magnetic features cutting across the spreading centres are identified as transform faults. The combination of the detected continental attributes of AR, the quantification of transform faults, and the outlined reduced extent of oceanic crust in the Amerasia Basin provide new insights into the opening history of the basin.

Current Evaluation of Upper Oesophageal Sphincter Opening in Dysphagia Practice: An International SLT Survey

ERIC Educational Resources Information Center

Regan, Julie; Walshe, Margaret; McMahon, Barry P.

2012-01-01

Background: The assessment of adequate upper oesophageal sphincter (UOS) opening during swallowing is an integral component of dysphagia evaluation. Aims: To ascertain speech and language therapists' (SLTs) satisfaction with current methods for assessing UOS function in people with dysphagia and to identify challenges encountered by SLTs with UOS…

Bottom head assembly

DOEpatents

Fife, A.B.

1998-09-01

A bottom head dome assembly is described which includes, in one embodiment, a bottom head dome and a liner configured to be positioned proximate the bottom head dome. The bottom head dome has a plurality of openings extending there through. The liner also has a plurality of openings extending there through, and each liner opening aligns with a respective bottom head dome opening. A seal is formed, such as by welding, between the liner and the bottom head dome to resist entry of water between the liner and the bottom head dome at the edge of the liner. In the one embodiment, a plurality of stub tubes are secured to the liner. Each stub tube has a bore extending there through, and each stub tube bore is coaxially aligned with a respective liner opening. A seat portion is formed by each liner opening for receiving a portion of the respective stub tube. The assembly also includes a plurality of support shims positioned between the bottom head dome and the liner for supporting the liner. In one embodiment, each support shim includes a support stub having a bore there through, and each support stub bore aligns with a respective bottom head dome opening. 2 figs.

Interpretation of massive sandstones in ephemeral fluvial settings: A case study from the Upper Candelária Sequence (Upper Triassic, Paraná Basin, Brazil)

NASA Astrophysics Data System (ADS)

Horn, Bruno Ludovico Dihl; Goldberg, Karin; Schultz, Cesar Leandro

2018-01-01

Ephemeral rivers display a wide range of upper- and lower-flow regime structures due to great flow-velocity changes during the floods. The development of flow structures in these setting is yet to be understood, especially in the formation of thick, massive sandstones. The Upper Triassic of Southern Gondwana was marked by a climate with great seasonal changes, yet there is no description of river systems with seasonal characteristics in Southern Gondwana. This work aims to characterize a ephemeral alluvial system of the Upper Triassic of the Paraná Basin. The characteristics of the deposits are discussed in terms of depositional processes through comparison with similar deposits from literature, flow characteristics and depositional signatures compared to flume experiments. The alluvial system is divided in four facies associations: (1) channels with wanning fill, characterized by low width/thickness ratio, tabular bodies, scour-and-fill structures with upper- and lower-flow regime bedforms; (2) channels with massive fill, characterized by low w/t ratio, sheet-like bodies, scour-and-fill structures with massive sandstones; (3) proximal sheetfloods, characterized by moderate w/t ratio, sheet-like bodies with upper- and lower-flow regime bedforms and (4) distal sheetfloods, characterized by high w/t ratio, sheet-like bodies with lower-flow regime bedforms. Evidence for the seasonal reactivation of the riverine system includes the scarcity of well-developed macroforms and presence of in-channel mudstones, thick intraformational conglomerates, and the occurrence of well- and poorly-preserved vertebrate bones in the same beds. The predominantly massive sandstones indicate deposition from a hyperconcentrated flow during abrupt changes in flow speed, caused by de-confinement or channel avulsion, whereas turbulent portions of the flow formed the upper- and lower-flow regime bedforms after the deposition of the massive layers. The upper portion of the Candelária Sequence records a good example of strongly ephemeral alluvial systems, where the predominance of massive sandstones is a particular characteristic.

Ceramic blade attachment system

DOEpatents

Boyd, G.L.

1994-12-13

A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion. 3 figures.

Cor triatriatum dexter: A rare cause of cyanosis during neonatal period.

PubMed

Alghamdi, Mohammed Hussien

2016-01-01

Cor-triatriatum dexter is an extremely rare congenital heart defect in which there is complete persistence of the right valve of embryonic sinus venosus that results in partitioning of the right atrium into a smooth and trabeculated portion. The smooth portion receives venous blood from inferior vena cava, superior vena cava, and coronary sinus while the trabeculated portion contains the right atrial appendage and the opening of tricuspid valve. We report a 1-week-old child who presented with intermittent episodes of central cyanosis. Echocardiography, established, and bubble contrast study confirmed the diagnosis of an isolated cor-triatriatum dexter. The baby initially underwent an intervention by cardiac catheterization, which was unsuccessful in disrupting the membrane and re-direct the systemic venous flow to the right heart chambers. She subsequently had the cor-triatriatum dexter membrane resected via an uncomplicated open-heart surgery.

Evidence Builds for Old Under-Ice Volcanoes on Mars

NASA Image and Video Library

2016-05-03

These mountains are in a region called Sisyphi Montes. The base image from NASA 2001 Mars Odyssey shows a portion of the region about 130 miles. Red outlines indicate possible subglacial volcanic structures. MRO CRISM data are at upper right.

Maintenance and design of steel abutment piles in Iowa bridges.

DOT National Transportation Integrated Search

2014-09-01

Soil consolidation and erosion caused by roadway runoff have exposed the upper portions of steel piles at the abutments of : numerous bridges, leaving them susceptible to accelerated corrosion rates due to the abundance of moisture, oxygen, and : chl...

Melas Chasm Enhanced Color

NASA Image and Video Library

1998-06-04

This picture centered at latitude 10 degrees S., longitude 74 degrees W. shows much of Mars Melas Chasm and a portion of Candor Chasm upper right in central Valles Marineris as seen by NASA's Viking Orbiter 2. http://photojournal.jpl.nasa.gov/catalog/PIA00156

Simultaneous treatment of SO2 containing stack gases and waste water

NASA Technical Reports Server (NTRS)

Poradek, J. C.; Collins, D. D. (Inventor)

1978-01-01

A process for simultaneously removing sulfur dioxide from stack gases and the like and purifying waste water such as derived from domestic sewage is described. A portion of the gas stream and a portion of the waste water, the latter containing dissolved iron and having an acidic pH, are contacted in a closed loop gas-liquid scrubbing zone to effect absorption of the sulfur dioxide into the waste water. A second portion of the gas stream and a second portion of the waste water are controlled in an open loop gas-liquid scrubbing zone. The second portion of the waste water contains a lesser amount of iron than the first portion of the waste water. Contacting in the openloop scrubbing zone is sufficient to acidify the waste water which is then treated to remove solids originally present.

Upper Mississippi River Land Use Allocation Plan. Master Plan for Public Use Development and Resource Management. Parts 1 and 2.

DTIC Science & Technology

1983-09-01

many broad-based and long- associated with the Upper Mississippi les of such problems include increasing water quality issues, balancing growth 1...farther west. In the pioneer the end of the St. Paul District portion sites (disturbed sites without previous growth where Mississippi River. species of...have a high water table in lower areas. The percolation rate is generally less than 10 minutes per inch. These *soils tend to be acid and low in

Landing Trail in 3-D

NASA Technical Reports Server (NTRS)

2004-01-01

A three-dimensional color model created using data from the Mars Exploration Rover's panoramic camera shows images of airbag drag marks on the martian surface. The triangular rock in the upper left corner is approximately 20 centimeters (8 inches) tall. The meatball-shaped rock in the upper right corner is approximately 10 centimeters (4 inches) tall. The dark portion of the surface, or 'trough' is approximately 1 centimeter (0.4 inches) deep at its deepest point. This model is displayed using software developed by NASA's Ames Research Center.

Slotted Aircraft Wing

NASA Technical Reports Server (NTRS)

Vassberg, John C. (Inventor); Gea, Lie-Mine (Inventor); McLean, James D. (Inventor); Witowski, David P. (Inventor); Krist, Steven E. (Inventor); Campbell, Richard L. (Inventor)

2006-01-01

An aircraft wing includes a leading airfoil element and a trailing airfoil element. At least one slot is defined by the wing during at least one transonic condition of the wing. The slot may either extend spanwise along only a portion of the wingspan, or it may extend spanwise along the entire wingspan. In either case, the slot allows a portion of the air flowing along the lower surface of the leading airfoil element to split and flow over the upper surface of the trailing airfoil element so as to achieve a performance improvement in the transonic condition.

Water turbine system and method of operation

DOEpatents

Costin, Daniel P [Montpelier, VT

2011-05-10

A system for providing electrical power from a current turbine is provided. The system includes a floatation device and a mooring. A water turbine structure is provided having an upper and lower portion wherein the lower portion includes a water fillable chamber. A plurality of cables are used to couple the system where a first cable couples the water turbine to the mooring and a second cable couples the floatation device to the first cable. The system is arranged to allow the turbine structure to be deployed and retrieved for service, repair, maintenance and redeployment.

Water turbine system and method of operation

DOEpatents

Costin, Daniel P [Montpelier, VT

2009-02-10

A system for providing electrical power from a current turbine is provided. The system includes a floatation device and a mooring. A water turbine structure is provided having an upper and lower portion wherein the lower portion includes a water fillable chamber. A plurality of cables are used to couple the system where a first cable couples the water turbine to the mooring and a second cable couples the floatation device to the first cable. The system is arranged to allow the turbine structure to be deployed and retrieved for service, repair, maintenance and redeployment.

Water turbine system and method of operation

DOEpatents

Costin, Daniel P.

2010-06-15

A system for providing electrical power from a current turbine is provided. The system includes a floatation device and a mooring. A water turbine structure is provided having an upper and lower portion wherein the lower portion includes a water fillable chamber. A plurality of cables are used to couple the system where a first cable couples the water turbine to the mooring and a second cable couples the floatation device to the first cable. The system is arranged to allow the turbine structure to be deployed and retrieved for service, repair, maintenance and redeployment.

Endoscopic approach to the upper cervical spine and clivus: an anatomical study of the upper limits of the transoral corridor.

PubMed

La Corte, Emanuele; Aldana, Philipp R

2017-04-01

Recent advances in endoscopic techniques have allowed minimally invasive approaches to the cranio-vertebral junction (CVJ) through the oropharynx (ETA) in addition to the transnasal approach (EEA). These minimally invasive endoscopic techniques allow for increased surgical exposure using no visible incisions, with a potential less morbidity. The ability to know preoperatively the limit of the ETA is vital for the surgical planning in order to better address CVJ pathology. The aim of the present study is to determine the anatomical limits of endoscopic dissection of the skull base and upper cervical spine through the transoral corridor and the superior limit reached by adopting this approach. Six fresh-frozen adult cadaver heads were dissected adopting ETA preserving the hard and soft palate. The most superior extent of the exposure was dissected. Post-operative CT scans were performed to confirm the superior extent. The superior most limit of dissection corresponded to the sphenoid-occipital junction, where the basilar portion of the occipital bone joins with the sphenoid bone's body. This ranged from 12.7 to 18.9 mm above the line of the hard palate. This was achieved without having to transgress any of the palatine structures. The sphenoid-occipital junction represents the rostral limit of endoscopic transoral approach to the lower skull base and CVJ area. This approach is limited superiorly by the orientation of the hard palate and mouth aperture and lower dentition due to the linear nature of the endoscope. Using the endoscope for this approach can allow for a more superior exposure than the traditional open transoral approach.

Morphological representation of order-statistics filters.

PubMed

Charif-Chefchaouni, M; Schonfeld, D

1995-01-01

We propose a comprehensive theory for the morphological bounds on order-statistics filters (and their repeated iterations). Conditions are derived for morphological openings and closings to serve as bounds (lower and upper, respectively) on order-statistics filters (and their repeated iterations). Under various assumptions, morphological open-closings and close-openings are also shown to serve as (tighter) bounds (lower and upper, respectively) on iterations of order-statistics filters. Simulations of the application of the results presented to image restoration are finally provided.

Duct closure

DOEpatents

Vowell, Kennison L.

1987-01-01

A closure for an inclined duct having an open upper end and defining downwardly extending passageway. The closure includes a cap for sealing engagement with the open upper end of the duct. Associated with the cap are an array of vertically aligned plug members, each of which has a cross-sectional area substantially conforming to the cross-sectional area of the passageway at least adjacent the upper end of the passageway. The plug members are interconnected in a manner to provide for free movement only in the plane in which the duct is inclined. The uppermost plug member is attached to the cap means and the cap means is in turn connected to a hoist means which is located directly over the open end of the duct.

33 CFR 118.75 - Lights on single-opening drawbridges.

Code of Federal Regulations, 2010 CFR

2010-07-01

... span. (c) Pier or abutment lights. Every swing bridge shall be lighted so that the end of each pier, abutment or fixed portion of the bridge adjacent to the navigable channel through the draw, or each end of the protection piers for such piers, abutments, or fixed portion of the bridge will be marked by a red...

Method for isolating two aquifers in a single borehole

DOEpatents

Burklund, P.W.

1984-01-20

A method for isolating and individually instrumenting separate aquifers within a single borehole is disclosed. A borehole is first drilled from the ground surface, through an upper aquifer, and into a separating confining bed. A casing, having upper and lower sections separated by a coupling collar, is lowered into the borehole. The borehole is grouted in the vicinity of the lower section of the casing. A borehole is then drilled through the grout plug and into a lower aquifer. After the lower aquifer is instrumented, the borehole is grouted back into the lower portion of the casing. Then the upper section of the casing is unscrewed via the coupling collar and removed from the borehole. Finally, instrumentation is added to the upper aquifer and the borehole is appropriately grouted. The coupling collar is designed to have upper right-hand screw threads and lower left-hand screw thread, whereby the sections of the casing can be readily separated.

Method for isolating two aquifers in a single borehole

DOEpatents

Burklund, Patrick W.

1985-10-22

A method for isolating and individually instrumenting separate aquifers within a single borehole. A borehole is first drilled from the ground surface, through an upper aquifer, and into a separating confining bed. A casing, having upper and lower sections separated by a coupling collar, is lowered into the borehole. The borehole is grouted in the vicinity of the lower section of the casing. A borehole is then drilled through the grout plug and into a lower aquifer. After the lower aquifer is instrumented, the borehole is grouted back into the lower portion of the casing. Then the upper section of the casing is unscrewed via the coupling collar and removed from the borehole. Finally, instrumentation is added to the upper aquifer and the borehole is appropriately grouted. The coupling collar is designed to have upper right-hand screw threads and lower left-hand screw thread, whereby the sections of the casing can be readily separated.

Upper Kalamazoo watershed land cover inventory. [based on remote sensing

NASA Technical Reports Server (NTRS)

Richason, B., III; Enslin, W.

1973-01-01

Approximately 1000 square miles of the eastern portion of the watershed were inventoried based on remote sensing imagery. The classification scheme, imagery and interpretation procedures, and a cost analysis are discussed. The distributions of land cover within the area are tabulated.

Fourth Coast-Seaway Systems Requirements Analysis : Volume II

DOT National Transportation Integrated Search

1972-03-01

This report summarizes the need for an Integrated Marine Traffic Information and Control System (IMTIC) in the St. Lawrence Seaway. The analytic emphasis is on the Welland Canal to Gulf of St. Lawrence portion of the Seaway system. The Upper Great La...

7. DETAIL VIEW OF LOWER MOUTH OF FISH LADDER AT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. DETAIL VIEW OF LOWER MOUTH OF FISH LADDER AT ROCK OUTCROPPING, SHOWING NATURAL CARVED ROCK POOLS, UPPER PORTION OF FISH LADDER VISIBLE IN DISTANCE, LOOKING SOUTHWEST (UPSTREAM) - Van Arsdale Dam, South Fork of Eel River, Ukiah, Mendocino County, CA

3. Building J interior, ground floor, looking northwest toward Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Building J interior, ground floor, looking northwest toward Building L and showing clerestory. Portion to left of clerestory has an upper floor. - Daniel F. Waters Germantown Dye Works, Building J, 37-55 East Wister Street, Philadelphia, Philadelphia County, PA

iss054e022072

NASA Image and Video Library

2018-01-12

iss054e022072 (Jan. 12, 2018) --- The International Space Station orbits above the Falkland Islands off the coast of the southern-most portion of Argentina on the continent of South America. In the upper-right of the photograph is the docked Progress 68 cargo craft.

6. Historic American Buildings Survey E. W. Russell, Photographer, Feb. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Historic American Buildings Survey E. W. Russell, Photographer, Feb. 12, 1937 VIEW LOOKING UP MAIN DRIVEWAY SHOWING SO. E. (UPPER PORTION) OF BLDG. ALSO WEST ELEV. OF CHURCH. - Convent of the Visitation, 2300 Spring Hill Avenue, Mobile, Mobile County, AL

A study of surgeons' postural muscle activity during open, laparoscopic, and endovascular surgery.

PubMed

Szeto, G P Y; Ho, P; Ting, A C W; Poon, J T C; Tsang, R C C; Cheng, S W K

2010-07-01

Different surgical procedures impose different physical demands on surgeons and high prevalence rates of neck and shoulder pain have been reported among general surgeons. Past research has examined electromyography in surgeons mainly during simulated conditions of laparoscopic and open surgery but not during real-time operations and not for long durations. The present study compares the neck-shoulder muscle activities in three types of surgery and between different surgeons. The relationships of postural muscle activities to musculoskeletal symptoms and personal factors also are examined. Twenty-five surgeons participated in the study (23 men). Surface electromyography (EMG) was recorded in the bilateral cervical erector spinae, upper trapezius, and anterior deltoid muscles during three types of surgical procedures: open, laparoscopic, and endovascular. In each procedure, EMG data were captured for 30 min to more than 1 h. The surgeons were asked to rate any musculoskeletal symptoms before and after surgery. The present study showed significantly higher muscle activities in the cervical erector spinae and upper trapezius muscles in open surgery compared with endovascular and laparoscopic procedures. Muscle activities were fairly similar between endovascular and laparoscopic surgery. The upper trapezius usually has an important role in stabilizing both the neck and upper limb posture, and this muscle also recorded higher activities in open compared with laparoscopic and endovascular surgeries. Surgeons reported similar degrees of musculoskeletal symptoms in open and laparoscopic surgeries, which were higher than endovascular surgery. The present study showed that open surgery imposed significantly greater physical demands on the neck muscles compared with endovascular and laparoscopic surgeries. This may be due to the lighter manual task demands of these minimally invasive surgeries compared with open procedures, which generally required more dynamic movements and more forceful exertions.

Direct surface analysis coupled to high-resolution mass spectrometry reveals heterogeneous composition of the cuticle of Hibiscus trionum petals.

PubMed

Giorio, Chiara; Moyroud, Edwige; Glover, Beverley J; Skelton, Paul C; Kalberer, Markus

2015-10-06

Plant cuticle, which is the outermost layer covering the aerial parts of all plants including petals and leaves, can present a wide range of patterns that, combined with cell shape, can generate unique physical, mechanical, or optical properties. For example, arrays of regularly spaced nanoridges have been found on the dark (anthocyanin-rich) portion at the base of the petals of Hibiscus trionum. Those ridges act as a diffraction grating, producing an iridescent effect. Because the surface of the distal white region of the petals is smooth and noniridescent, a selective chemical characterization of the surface of the petals on different portions (i.e., ridged vs smooth) is needed to understand whether distinct cuticular patterns correlate with distinct chemical compositions of the cuticle. In the present study, a rapid screening method has been developed for the direct surface analysis of Hibiscus trionum petals using liquid extraction surface analysis (LESA) coupled with high-resolution mass spectrometry. The optimized method was used to characterize a wide range of plant metabolites and cuticle monomers on the upper (adaxial) surface of the petals on both the white/smooth and anthocyanic/ridged regions, and on the lower (abaxial) surface, which is entirely smooth. The main components detected on the surface of the petals are low-molecular-weight organic acids, sugars, and flavonoids. The ridged portion on the upper surface of the petal is enriched in long-chain fatty acids, which are constituents of the wax fraction of the cuticle. These compounds were not detected on the white/smooth region of the upper petal surface or on the smooth lower surface.

Effects of intravesical hydrostatic pressure and volume on the distensibility of the canine prostatic portion of the urethra.

PubMed

Johnston, G R; Feeney, D A; Osborne, C A; Johnston, S D; Smith, F O; Jessen, C R

1985-03-01

Positive-contrast retrograde urethrocystograms were obtained serially on 12 male dogs weighing 11.4 to 23.2 kg before, during, and after the injection of contrast medium until the urinary bladder neck and prostatic and membranous portions of the urethra remained open and distended as viewed by fluoroscopy. Correlations of intravesical volumes and pressures required to achieve maximum distension of the midprostatic portion of the urethra with body weight and surface area were not significant. Because of the variability in intravesical volumes and pressures encountered at maximum distension of the prostatic portion of the urethra, a dose of contrast material expressed relative to body weight or surface area could not be determined for consistently providing maximum distension of the prostatic portion of the urethra.

WEST ELEVATION WITH GRADUATED MEASURING POLE. NOTE THE CIRCULAR OPENINGS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

WEST ELEVATION WITH GRADUATED MEASURING POLE. NOTE THE CIRCULAR OPENINGS INTO THE UNDERGROUND PORTION OF THE STRUCTURE. VIEW FACING EAST - U.S. Naval Base, Pearl Harbor, Ford Island 5-Inch Antiaircraft Battery, Battery Command Center, Ford Island, Pearl City, Honolulu County, HI

76 FR 65727 - Sunshine Act Meeting Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... be open to the public. The rest of the meeting will be closed to the public. MATTERS TO BE CONSIDERED: Portion Open to the Public: (1) Oral Argument in The North Carolina Board of Dental Examiners, Docket 9343...:45 am] BILLING CODE 6750-01-M ...

Scaling Observations of Surface Waves in the Beaufort Sea

DTIC Science & Technology

2016-04-14

the treatment of wind input can be improved in partial ice cover using the ice concentration, where wave energy is a function of open water distance...drifting buoys during the 2014 open water season, are interpreted using open water distances determined from satellite ice products and wind forcing time...series measured in situ with the buoys. A significant portion of the wave observations were found to be limited by open water distance (fetch) when

Irrigation of human prepared root canal – ex vivo based computational fluid dynamics analysis

PubMed Central

Šnjarić, Damir; Čarija, Zoran; Braut, Alen; Halaji, Adelaida; Kovačević, Maja; Kuiš, Davor

2012-01-01

Aim To analyze the influence of the needle type, insertion depth, and irrigant flow rate on irrigant flow pattern, flow velocity, and apical pressure by ex-vivo based endodontic irrigation computational fluid dynamics (CFD) analysis. Methods Human upper canine root canal was prepared using rotary files. Contrast fluid was introduced in the root canal and scanned by computed tomography (CT) providing a three-dimensional object that was exported to the computer-assisted design (CAD) software. Two probe points were established in the apical portion of the root canal model for flow velocity and pressure measurement. Three different CAD models of 27G irrigation needles (closed-end side-vented, notched open-end, and bevel open-end) were created and placed at 25, 50, 75, and 95% of the working length (WL). Flow rates of 0.05, 0.1, 0.2, 0.3, and 0.4 mL/s were simulated. A total of 60 irrigation simulations were performed by CFD fluid flow solver. Results Closed-end side-vented needle required insertion depth closer to WL, regarding efficient irrigant replacement, compared to open-end irrigation needle types, which besides increased velocity produced increased irrigant apical pressure. For all irrigation needle types and needle insertion depths, the increase of flow rate was followed by an increased irrigant apical pressure. Conclusions The human root canal shape obtained by CT is applicable in the CFD analysis of endodontic irrigation. All the analyzed values –irrigant flow pattern, velocity, and pressure – were influenced by irrigation needle type, as well as needle insertion depth and irrigant flow rate. PMID:23100209

Irrigation of human prepared root canal--ex vivo based computational fluid dynamics analysis.

PubMed

Snjaric, Damir; Carija, Zoran; Braut, Alen; Halaji, Adelaida; Kovacevic, Maja; Kuis, Davor

2012-10-01

To analyze the influence of the needle type, insertion depth, and irrigant flow rate on irrigant flow pattern, flow velocity, and apical pressure by ex-vivo based endodontic irrigation computational fluid dynamics (CFD) analysis. Human upper canine root canal was prepared using rotary files. Contrast fluid was introduced in the root canal and scanned by computed tomography (CT) providing a three-dimensional object that was exported to the computer-assisted design (CAD) software. Two probe points were established in the apical portion of the root canal model for flow velocity and pressure measurement. Three different CAD models of 27G irrigation needles (closed-end side-vented, notched open-end, and bevel open-end) were created and placed at 25, 50, 75, and 95% of the working length (WL). Flow rates of 0.05, 0.1, 0.2, 0.3, and 0.4 mL/s were simulated. A total of 60 irrigation simulations were performed by CFD fluid flow solver. Closed-end side-vented needle required insertion depth closer to WL, regarding efficient irrigant replacement, compared to open-end irrigation needle types, which besides increased velocity produced increased irrigant apical pressure. For all irrigation needle types and needle insertion depths, the increase of flow rate was followed by an increased irrigant apical pressure. The human root canal shape obtained by CT is applicable in the CFD analysis of endodontic irrigation. All the analyzed values -irrigant flow pattern, velocity, and pressure - were influenced by irrigation needle type, as well as needle insertion depth and irrigant flow rate.

Analyzing log and chip truck performance in the Upper Peninsula of Michigan with GPS tracking devices.

DOT National Transportation Integrated Search

2011-07-31

"Minimizing transportation costs is essential in the forest products industry, as the : relatively low value : and high weight of the products causes transportation to account for exceptionally high : portion of the : overall cost. The Midwest forest...

Analyzing log and chip truck performance in the upper peninsula of Michigan with GPS tracking devices.

DOT National Transportation Integrated Search

2011-07-01

Minimizing transportation costs is essential in the forest products industry, as the relatively low value and high weight of the products causes transportation to account for exceptionally high portion of the overall cost. The Midwest forest products...

Gamma ray detector shield

DOEpatents

Ohlinger, R.D.; Humphrey, H.W.

1985-08-26

A gamma ray detector shield comprised of a rigid, lead, cylindrical-shaped vessel having upper and lower portions with an pneumatically driven, sliding top assembly. Disposed inside the lead shield is a gamma ray scintillation crystal detector. Access to the gamma detector is through the sliding top assembly.

Geomorphology and Geology of the Southwestern Margaritifer Sinus and Argyre Regions of Mars. Part 1: Geological and Geomorphological Overview

NASA Technical Reports Server (NTRS)

Parker, T. J.; Pieri, D. C.

1985-01-01

Based upon Viking Orbiter 1 images of the southwestern portion of the Margaritifer Sinus Quadrangle, the northwestern portion of the Argyre Quadrangle, and a small portion of the southeastern Coprates Quadrangle, three major mountainous of plateau units, seven plains units, and six units related to valley forming processes were identified. The photomosaic is oriented such that it provides good areal coverage of the upper Chryse Trough from Argyre Planitia to just above Margaritifer Chaos as well as of plains units on either side of the Trough. The photomosaic was compiled from Viking Orbiter 1 images ranging in resolution from approximately 150 to 300 meters per pixel printed at a scale of about 1:2,000,000. The characteristics of each geomorphic unit are outlined.

A resource evaluation of the Bakken Formation (Upper Devonian and Lower Mississippian) continuous oil accumulation, Williston Basin, North Dakota and Montana

USGS Publications Warehouse

Schmoker, J.W.

1996-01-01

The Upper Devonian and Lower Mississippian Bakken Formation in the United States portion of the Williston Basin is both the source and the reservoir for a continuous oil accumulation - in effect a single very large field - underlying approximately 17,800 mi2 (46,100 km2) of North Dakota and Montana. Within this area, the Bakken Formation continuous oil accumulation is not significantly influenced by the water column and cannot be analyzed in terms of conventional, discrete fields. Rather, the continuous accumulation can be envisioned as a collection of oil-charged cells, virtually all of which are capable of producing some oil, but which vary significantly in their production characteristics. Better wellperformance statistics are linked regionally to higher levels of thermal maturity and to lower levels of reservoir heterogeneity. Although portions of the Bakken Formation continuous oil accumulation have reached a mature stage of development, the accumulation as a whole is far from depleted.

Lunar regolith dynamics based on analysis of the cosmogenic radionuclides Na-22, Al-26, and Mn-53

NASA Technical Reports Server (NTRS)

Fruchter, J. S.; Rancitelli, L. A.; Laul, J. C.; Perkins, R. W.

1977-01-01

Depth profiles of Na-22 and Al-26 in the upper portions of five lunar cores are analyzed. From the analyses, it is concluded that the natural gardening processes on the lunar surface result in mixing of the regolith to a depth of 2-3 cm over a time period which is short compared with the half-life of Al-26 (0.73 m.y.). It is also concluded that the rotary drill processes which were used to obtain the deep drill samples generally resulted in loss and/or mixing of the upper portions of the cores. In contrast, the near-surface regions of the drive tube cores appear to have a well-preserved stratigraphy. Analysis of Mn-53 in samples of six lunar rocks helps substantiate the accuracy of age date estimates by other means, and provides definite information that the total lunar surface exposure of two of these rocks has occurred during a single surface event which continued to their collection.

Okavango Delta, Botswana as seen from STS-66 shuttle Atlantis

NASA Technical Reports Server (NTRS)

1994-01-01

This November 1994 view looking south-southeast shows clouds over the Okavango Delta area of northern Botswana. The Okavango is one of the wilder, less spoiled regions of Africa. The Okavango River (lower left of view) brings water from the high, wet plateaus of Angola into the Kalahari Dessert, and enormous inland basin. As a result of a series of small faults (upper center of the view) related to the African Rift System, the river is dammed up in the form of a swampy inland delta. The visual patterns of the area are strongly linear: straight sand dunes occur in many places and can be seen across the bottom portion of the photograph. Numerous brush-fire scars produce a complex, straight-edged pattern over much of the lower portion of this view. Lake Ngami (upper right of view) was once permanently full as late as the middle 1800s. Changes in the climate of the area over the last 100 years has changed the size and shape of the inland delta.

Retractable Visual Indicator Assembly

NASA Technical Reports Server (NTRS)

Hackler, George R. (Inventor); Gamboa, Ronald J. (Inventor); Dominquez, Victor (Inventor)

1998-01-01

A retractable indicator assembly may be mounted on a container which transmits air through the container and removes deleterious gases with an activated charcoal medium in the container. The assembly includes: an elongate indicator housing has a chamber therein; a male adaptor with an external threads is used for sealing engagement with the container; a plug located at the upper end of the housing; a housing that includes a transparent wall portion for viewing at least a portion of the chamber; a litmus indicator, moveable by a retractable rod from a retracted position within the container to an extended position within the chamber of the housing; and an outer housing that is secured to the upper end of the rod, and protects the indicator housing while the litmus indicator is in its normally retracted position. The assembly may be manually manipulated between its extended position wherein the litmus indicator may be viewed through the transparent wall of the indicator housing, and a retracted position wherein the outer housing encloses the indicator housing and engages the exterior of the container.

Laparoscopic nephroureterectomy: making management of upper-tract transitional-cell carcinoma entirely minimally invasive.

PubMed

Keeley, F X; Tolley, D A

1998-04-01

Endoscopic treatment of upper-tract transitional-cell carcinoma (TCC) is well established. Nevertheless, many patients still required major ablative surgery. We have applied our experience with laparoscopic nephrectomy to the performance of laparoscopic nephroureterectomy in order to make the management of upper-tract TCC entirely minimally invasive. Since 1993, we have performed 22 laparoscopic nephroureterectomies for upper-tract TCC. Initially, we excluded patients with tumors below the pelvic brim, but we now offer a trial of laparoscopy to all patients. We describe the evolution of our technique, which involves resecting the ureteral orifice prior to laparoscopic dissection of the kidney and ureter. We have had to convert three cases to open surgery, one each for bleeding, failure to progress, and unappreciated tumor extent. Operative times averaged 156 minutes, which compares well with contemporary times for open nephroureterectomy. Complication rates, transfusion requirements, and length of stay, although higher than those of laparoscopic nephrectomy, were all reduced in comparison with open nephroureterectomy.

Monitoring means for combustion engine electric storage battery means

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, G. K.; Rautiola, R. E.; Taylor, R. E.

Disclosed, in combination, are a combustion engine, an electric storage battery, an electrically powered starter motor for at times driving the engine in order to start the engine, and an electrical system monitor; the electrical system monitor has a first monitoring portion which senses the actual voltage across the battery and a second monitoring portion which monitors the current through the battery; an electrical switch controls associated circuitry and is actuatable into open or closed conditions; whenever the first monitoring portion senses a preselected magnitude of the actual voltage across the battery or the second monitoring portion senses a preselectedmore » magnitude of the current flow through the battery, the electrical switch is actuated.« less

Thin film solar cell including a spatially modulated intrinsic layer

DOEpatents

Guha, Subhendu; Yang, Chi-Chung; Ovshinsky, Stanford R.

1989-03-28

One or more thin film solar cells in which the intrinsic layer of substantially amorphous semiconductor alloy material thereof includes at least a first band gap portion and a narrower band gap portion. The band gap of the intrinsic layer is spatially graded through a portion of the bulk thickness, said graded portion including a region removed from the intrinsic layer-dopant layer interfaces. The band gap of the intrinsic layer is always less than the band gap of the doped layers. The gradation of the intrinsic layer is effected such that the open circuit voltage and/or the fill factor of the one or plural solar cell structure is enhanced.

Correlation of Structural Analysis and Test Results for the McDonnell Douglas Stitched/RFI All-Composite Wing Stub Box

NASA Technical Reports Server (NTRS)

Wang, John T.; Jegley, Dawn C.; Bush, Harold G.; Hinrichs, Stephen C.

1996-01-01

The analytical and experimental results of an all-composite wing stub box are presented in this report. The wing stub box, which is representative of an inboard portion of a commercial transport high-aspect-ratio wing, was fabricated from stitched graphite-epoxy material with a Resin Film Infusion manufacturing process. The wing stub box was designed and constructed by the McDonnell Douglas Aerospace Company as part of the NASA Advanced Composites Technology program. The test article contained metallic load-introduction structures on the inboard and outboard ends of the graphite-epoxy wing stub box. The root end of the inboard load introduction structure was attached to a vertical reaction structure, and an upward load was applied to the outermost tip of the outboard load introduction structure to induce bending of the wing stub box. A finite element model was created in which the center portion of the wing-stub-box upper cover panel was modeled with a refined mesh. The refined mesh was required to represent properly the geometrically nonlinear structural behavior of the upper cover panel and to predict accurately the strains in the stringer webs of the stiffened upper cover panel. The analytical and experimental results for deflections and strains are in good agreement.

21 CFR 10.204 - General.

Code of Federal Regulations, 2010 CFR

2010-04-01

... § 10.204 General. (a) FDA has for many years willingly committed itself to a policy of openness. In many instances FDA has sought to make the open portions of agency public administrative proceedings... proceeding. Knowledge of anticipated media coverage will allow the presiding officer to make any special...

24. A SECTION OF OPEN BALUSTRADE AND AN INTERMEDIATE PEDESTAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. A SECTION OF OPEN BALUSTRADE AND AN INTERMEDIATE PEDESTAL (CENTERED ON A PYLON) OVER THE CENTRAL PORTIONS OF THE BRIDGE. THE WALKS ARE CONCRETE, WITH AN INTEGRAL CURB. THE ROADWAY IS ASPHALT. - Main Street Bridge, Spanning East Fork Whitewater River, Richmond, Wayne County, IN

3. DETAIL OF NORTHEAST CORNER; OPENING AT TOP WAS INTAKE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. DETAIL OF NORTHEAST CORNER; OPENING AT TOP WAS INTAKE FOR CATTLE; CANTILEVERED HOG RUN (BUILDING 147) OBSCURES A PORTION OF THE BEEF KILL'S ORIGINAL GLASS BLOCK WALLS - Rath Packing Company, Beef Killing Building, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

Matching incomplete time series with dynamic time warping: an algorithm and an application to post-stroke rehabilitation.

PubMed

Tormene, Paolo; Giorgino, Toni; Quaglini, Silvana; Stefanelli, Mario

2009-01-01

The purpose of this study was to assess the performance of a real-time ("open-end") version of the dynamic time warping (DTW) algorithm for the recognition of motor exercises. Given a possibly incomplete input stream of data and a reference time series, the open-end DTW algorithm computes both the size of the prefix of reference which is best matched by the input, and the dissimilarity between the matched portions. The algorithm was used to provide real-time feedback to neurological patients undergoing motor rehabilitation. We acquired a dataset of multivariate time series from a sensorized long-sleeve shirt which contains 29 strain sensors distributed on the upper limb. Seven typical rehabilitation exercises were recorded in several variations, both correctly and incorrectly executed, and at various speeds, totaling a data set of 840 time series. Nearest-neighbour classifiers were built according to the outputs of open-end DTW alignments and their global counterparts on exercise pairs. The classifiers were also tested on well-known public datasets from heterogeneous domains. Nonparametric tests show that (1) on full time series the two algorithms achieve the same classification accuracy (p-value =0.32); (2) on partial time series, classifiers based on open-end DTW have a far higher accuracy (kappa=0.898 versus kappa=0.447;p<10(-5)); and (3) the prediction of the matched fraction follows closely the ground truth (root mean square <10%). The results hold for the motor rehabilitation and the other datasets tested, as well. The open-end variant of the DTW algorithm is suitable for the classification of truncated quantitative time series, even in the presence of noise. Early recognition and accurate class prediction can be achieved, provided that enough variance is available over the time span of the reference. Therefore, the proposed technique expands the use of DTW to a wider range of applications, such as real-time biofeedback systems.

Solving Open Job-Shop Scheduling Problems by SAT Encoding

NASA Astrophysics Data System (ADS)

Koshimura, Miyuki; Nabeshima, Hidetomo; Fujita, Hiroshi; Hasegawa, Ryuzo

This paper tries to solve open Job-Shop Scheduling Problems (JSSP) by translating them into Boolean Satisfiability Testing Problems (SAT). The encoding method is essentially the same as the one proposed by Crawford and Baker. The open problems are ABZ8, ABZ9, YN1, YN2, YN3, and YN4. We proved that the best known upper bounds 678 of ABZ9 and 884 of YN1 are indeed optimal. We also improved the upper bound of YN2 and lower bounds of ABZ8, YN2, YN3 and YN4.

Functional Morphology of the Mouthparts of the Adult Mediterranean Fruit Fly, Ceratitis capitata

PubMed Central

Coronado-Gonzalez, Pablo A.; Vijaysegaran, S.; Robinson, Alan S.

2008-01-01

Food-based attractants incorporating an insecticide are an important component of area-wide control programmes for the Mediterranean fruit fly, Ceratitis capitata (Wiedemann) (Diptera: Tephritidae). This study was carried out to understand the feeding mechanism of adults of this species. Mouthparts of C. capitata are similar in general structure to those of another Tephritid genus, Bactrocera, and have specific structural modifications that determine what adult flies can ingest. The labellum has a series of fine tube-like structures, called pseudotracheae, on its inner surface. Each pseudotrachea leads from the outer margin of the labellum and ends at the prestomum to the oral opening. The pseudotracheae contain fine micropores about 0.5µm in size. During feeding, the oral opening is never exposed to the feeding substrate but the portions of the opposing labellar lobes proximal to the oral opening are flexed against each other and distal portions of the opposing labellar lobes are opened and pressed flat against the feeding substrate or surface. The prestomal spines at the base of each pseudotrachea interlock to form a barrier across the oral opening. Thus entry of large particles directly into the crop and gut through the oral opening is prevented by flexure of the opposing labellar lobes against each other and the interlocking prestomal spines across the oral opening. Only liquids and suspended particles less than 0.5µm in size are sucked through the micropores into the lumen of the pseudotracheae and then pass into the food canal and into the crop and gut. The pseudotracheae of adult C. capitata, particularly along the middle portion of the labellum, have prominent blade-like projections that Bactrocera do not have. These projections are probably an ancestral condition as they were not observed to use them to abrade the plant or feeding surface as has been reported for species in the Tephritid genus, Blepharoneura.

KSC-06pd1887

NASA Image and Video Library

2006-08-18

KENNEDY SPACE CENTER, FLA. - At Astrotech Space Operations in Titusville, Fla., workers check the fitting of the upper portion of the transportation canister onto the lower portion. The canister encases the STEREO spacecraft for its move to Launch Pad 17-B at Cape Canaveral Air Force Station. STEREO stands for Solar Terrestrial Relations Observatory and comprises two spacecraft. The STEREO mission is the first to take measurements of the sun and solar wind in 3-dimension. This new view will improve our understanding of space weather and its impact on the Earth. STEREO is expected to lift off Aug. 31. Photo credit: NASA/Kim Shiflett

KSC-06pd1886

NASA Image and Video Library

2006-08-18

KENNEDY SPACE CENTER, FLA. - At Astrotech Space Operations in Titusville, Fla., workers help guide the upper portion of the transportation canister onto the lower portion. The canister encases the STEREO spacecraft for its move to Launch Pad 17-B at Cape Canaveral Air Force Station. STEREO stands for Solar Terrestrial Relations Observatory and comprises two spacecraft. The STEREO mission is the first to take measurements of the sun and solar wind in 3-dimension. This new view will improve our understanding of space weather and its impact on the Earth. STEREO is expected to lift off Aug. 31. Photo credit: NASA/Kim Shiflett

Electrical impedance tomography during major open upper abdominal surgery: a pilot-study

PubMed Central

2014-01-01

Background Electrical impedance tomography (EIT) of the lungs facilitates visualization of ventilation distribution during mechanical ventilation. Its intraoperative use could provide the basis for individual optimization of ventilator settings, especially in patients at risk for ventilation-perfusion mismatch and impaired gas exchange, such as patients undergoing major open upper abdominal surgery. EIT throughout major open upper abdominal surgery could encounter difficulties in belt positioning and signal quality. Thus, we conducted a pilot-study and tested whether EIT is feasible in patients undergoing major open upper abdominal surgery. Methods Following institutional review board’s approval and written informed consent, we included patients scheduled for major open upper abdominal surgery of at least 3 hours duration. EIT measurements were conducted prior to intubation, at the time of skin incision, then hourly during surgery until shortly prior to extubation and after extubation. Number of successful intraoperative EIT measurements and reasons for failures were documented. From the valid measurements, a functional EIT image of changes in tidal impedance was generated for every time point. Regions of interest were defined as horizontal halves of the picture. Monitoring of ventilation distribution was assessed using the center of ventilation index, and also using the total and dorsal ventilated lung area. All parameter values prior to and post intubation as well as extubation were compared. A p < 0.05 was considered statistically significant. Results A total of 120 intraoperative EIT measurements during major abdominal surgery lasting 4-13 hours were planned in 14 patients. The electrode belt was attached between the 2nd and 4th intercostal space. Consecutive valid measurements could be acquired in 13 patients (93%). 111 intraoperative measurements could be retrieved as planned (93%). Main obstacle was the contact of skin electrodes. Despite the high belt position, distribution of tidal volume showed a significant shift of ventilation towards ventral lung regions after intubation. This was reversed after weaning from mechanical ventilation. Conclusions Despite a high belt position, monitoring of ventilation distribution is feasible in patients undergoing major open upper abdominal surgery lasting from 4 to 13 hours. Therefore, further interventional trials in order to optimize ventilatory management should be initiated. PMID:25018668

Photovoltaic array mounting apparatus, systems, and methods

DOEpatents

West, Jack Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

2015-04-14

A photovoltaic array, including: (a) supports laid out on a surface in rows and columns; (b) photovoltaic modules positioned on top of the supports; and (c) fasteners connecting the photovoltaic modules to the supports, wherein the supports have an upper pedestal surface and a lower pedestal surface such that the photovoltaic modules are positioned at a non-horizontal angle when edges of the photovoltaic modules are positioned on top of the upper and lower pedestal surfaces, and wherein a portion of the fasteners rotate to lock the photovoltaic modules onto the supports.

Photovoltaic array mounting apparatus, systems, and methods

DOEpatents

West, Jack Raymond; Atchley, Brian; Hudson, Tyrus Hawkes; Johansen, Emil

2016-01-05

A photovoltaic array, including: (a) supports laid out on a surface in rows and columns; (b) photovoltaic modules positioned on top of the supports; and (c) fasteners connecting the photovoltaic modules to the supports, wherein the supports have an upper pedestal surface and a lower pedestal surface such that the photovoltaic modules are positioned at a non-horizontal angle when edges of the photovoltaic modules are positioned on top of the upper and lower pedestal surfaces, and wherein a portion of the fasteners rotate to lock the photovoltaic modules onto the supports.

[Isolation of C. pyloridis from children].

PubMed

Spirina, T S; Bokser, G V; Safonova, T B; Taranenko, L A; Levitskaia, S V

1989-01-01

The authors analyze the findings of gastroduodenal biopsies in 25 children aged 6 to 15 years suffering from mucosal inflammations and functional abnormalities of the upper portions of the digestive tract. Chocolate agar with various bases, one of which has been suggested by the authors, has been used for the isolation of C. pyloridis. Five cultures have been isolated. Microscopic examinations and biochemical identification of the isolates have lead the authors to a conclusion that campylobacter infections of the upper digestive tract may be diagnosed with certainty only after a comprehensive bacteriologic examination.

Flow-induced oscillations of a floating moored cylinder

NASA Astrophysics Data System (ADS)

Carlson, Daniel; Modarres-Sadeghi, Yahya

2016-11-01

An experimental study of flow-induced oscillations of a floating model spar buoy was conducted. The model spar consisted of a floating uniform cylinder moored in a water tunnel test section, and free to oscillate about its mooring attachment point near the center of mass. For the bare cylinder, counter-clockwise (CCW) figure-eight trajectories approaching A* =1 in amplitude were observed at the lower part of the spar for a reduced velocity range of U* =4-11, while its upper part experienced clockwise (CW) orbits. It was hypothesized that the portion of the spar undergoing CCW figure eights is the portion within which the flow excites the structure. By adding helical strakes to the portion of the cylinder with CCW figure eights, the response amplitude was significantly reduced, while adding strakes to portions with clockwise orbital motion had a minimal influence on the amplitude of response. This work is partially supported by the NSF-sponsored IGERT: Offshore Wind Energy Engineering, Environmental Science, and Policy (Grant Number 1068864).

Overcenter collet space station truss fastener

NASA Technical Reports Server (NTRS)

Sheridan, Philip L. (Inventor)

1991-01-01

A quick-connect fastener is arranged with a tubular body that is arranged to be engaged against the exterior surface of a hollow attachment fitting and coincidentally aligned with an opening in the fitting. A collet having normally-contracted fingers with outwardly-enlarged ends is operatively arranged in the body to be moved forwardly by an expander member mounted in the tubular body for advancing the collet fingers through the opening in the attachment fitting. Biasing means are arranged between the expander member and a toggle linkage in the tubular body which is selectively operated to urge the expander member forwardly into engagement with the collet fingers with an initial biasing force to advance their forward portions through the body opening and then expand them outwardly. The biasing means also provide a subsequent biasing force for retaining the collet members in their expanded positions once their enlarged forward end portions are on the opposite side of the body.

Mounting Systems for Structural Members, Fastening Assemblies Thereof, and Vibration Isolation Systems Including the Same

NASA Technical Reports Server (NTRS)

Young, Ken (Inventor); Hindle, Timothy (Inventor); Barber, Tim Daniel (Inventor)

2016-01-01

Mounting systems for structural members, fastening assemblies thereof, and vibration isolation systems including the same are provided. Mounting systems comprise a pair of mounting brackets, each clamped against a fastening assembly forming a mounting assembly. Fastening assemblies comprise a spherical rod end comprising a spherical member having a through opening and an integrally threaded shaft, first and second seating members on opposite sides of the spherical member and each having a through opening that is substantially coaxial with the spherical member through opening, and a partially threaded fastener that threadably engages each mounting bracket forming the mounting assembly. Structural members have axial end portions, each releasably coupled to a mounting bracket by the integrally threaded shaft. Axial end portions are threaded in opposite directions for permitting structural member rotation to adjust a length thereof to a substantially zero strain position. Structural members may be vibration isolator struts in vibration isolation systems.

75 FR 42446 - Sunshine Act Meeting Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-21

... MORE INFORMATION: Mitch Katz, Office of Public Affairs, (202) 326-2180. Recorded Message: (202) 326... Pennsylvania Avenue, NW., Washington, DC 20580. STATUS: Part of this meeting will be open to the public. The rest of the meeting will be closed to the public. Matters To Be Considered Portion Open to the Public...

78 FR 41928 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... Room, Washington, DC. STATUS: The first portion of the meeting will be in Open Session and the remainder of the meeting will be in Closed Session. MATTERS TO BE CONSIDERED: Open Session 1. Briefing on.... [FR Doc. 2013-16798 Filed 7-10-13; 11:15 am] BILLING CODE 6730-01-P ...

78 FR 69141 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-18

... POSTAL REGULATORY COMMISSION Sunshine Act Meeting TIME AND DATE: Wednesday, December 11, 2013, at.... STATUS: Part of this meeting will be open to the public. The rest of the meeting will be closed to the... December 11, 2013 meeting includes the items identified below. PORTIONS OPEN TO THE PUBLIC: 1. Report from...

In situ conversion process systems utilizing wellbores in at least two regions of a formation

DOEpatents

Vinegar, Harold J [Bellaire, TX; Hsu, Chia-Fu [Granada Hills, CA

2011-09-27

A system for heating a subsurface formation is described. The system includes a plurality of elongated heaters located in a plurality of openings in the formation. At least two of the heaters are substantially parallel to each other for at least a portion of the lengths of the heaters. At least two of the heaters have first end portions in a first region of the formation and second end portions in a second region of the formation. A source of time-varying current is configured to apply time-varying current to at least two of the heaters. The first end portions of at least two heaters are configured to have substantially the same voltage applied to them. The second portions of at least two heaters are configured to have substantially the same voltage applied to them.

[Experience of systematization on the treatment of patients with upper jaws fractures, during the period 1991-2000].

PubMed

Khinkov, D

2005-01-01

A retrospecive analysis was done of the 128 patients with fractures in a upper jaw, treated during the period 1991-2000. The treatment of the patients with partial fractures in a alveolar part of maxilla and frontal wall of maxillary sinus, consist of debridement on the open wound, primery stiched and stabilization by arch bar of perspective teeth. In the cases with fractures of tuber maxilla and opening of maxillary sinus they tray to clouse it by Rhermann technique, with or without radical antrothomy by Caldwell-Luc technique. On the patients by total upper jaw fractures they try lead by princip of duble stage fixation: from one side-of intact upper bone structures and the other side-on a mandible. On the cases of upper jaw fractures, combine with barain traums. was treated conservativly - the specialize treatment of facial injures was postpoun until stabilization of brain status.

The Role of a Conservative Minimal Interventional Management Protocol in the Fractures of the Dentate Portion of the Adult Mandible

PubMed Central

Krishnan, Balasubramanian

2015-01-01

Mandibular fractures are commonly encountered by the maxillofacial surgeon. Maxillomandibular fixation (MMF) and open reduction and internal fixation (ORIF), or a combination of both, are the accepted standard treatments. This study aims to assess the role of a conservative minimal intervention protocol in the management of undisplaced/minimally displaced fractures of the dentate portion of the adult mandible and the complications associated with such minimalistic intervention. Thirty-four patients with undisplaced/minimally displaced fractures of the dentate portion of the adult mandible were advised to restrict mouth opening and limit themselves to a soft diet for a minimum of 4 weeks. All patients were advised follow-up at regular intervals for at least 3 months. Five patients were lost to follow-up. Symphysis and parasymphysis fractures were the most common fracture locations. Fourteen patients needed tension band stabilization with a mandibular arch bar/bridle wiring and three patients required extraction of luxated teeth. All patients showed satisfactory healing except three in whom additional intervention (ORIF) was performed. The improvement in mouth opening was statistically significant. Complications were seen more frequently among smokers and alcoholics. For patients with minimally displaced mandibular fractures, it is necessary to consider if the perceived benefits of intervention justify the associated added costs and possible complications. Patients have to be fully informed about the possible complications while using this minimal intervention protocol. This study concludes that a conservative minimal intervention management protocol for such fractures of the dentate portion of the mandible can produce satisfactory results. PMID:26889344

Electronic structure and optical properties of defect chalcopyrite HgGa2Se4

NASA Astrophysics Data System (ADS)

Gabrelian, B. V.; Lavrentyev, A. A.; Vu, Tuan V.; Parasyuk, O. V.; Khyzhun, O. Y.

2018-01-01

We report on studies from an experimental and theoretical viewpoint of the electronic structure of mercury digallium selenide, HgGa2Se4, a very promising optoelectronic material. In particular, the method of X-ray photoelectron spectroscopy (XPS) was used to evaluate binding energies of the constituent element core electrons and the shape of the valence band for pristine and Ar+-ion bombarded surfaces of HgGa2Se4 single crystal. First principles band-structure calculations were performed in the present work using the augmented plane wave + local orbitals (APW+lo). These calculations indicate that the Se 4p states are the main contributors at the top and in the upper portion of the valence band with slightly smaller contributions of the Ga 4p states in the upper portion of the band as well. Further, the central portion of the valence band is determined mainly by contributions of the Ga 4s states, and the Hg 5d states are the principal contributors to the bottom of the valence band. These theoretical data are in fair agreement when matching on a common energy scale of the X-ray emission bands giving information on the energy distribution of the Se 4p and Ga 4p states and the XPS valence-band spectrum of the HgGa2Se4 crystal. The principal optical constants are elucidated from the DFT calculations.

[Tufted hair folliculitis].

PubMed

Trüeb, R M; Pericin, M; Hafner, J; Burg, G

1997-04-01

A case of tufted hair folliculutis presenting as circumscribed, tender and inflamed areas in the occiput with residual tufted follicles in a 28-year old man is reported. Tufted hair folliculitis is a characteristic localized scarring bacterial folliculitis of the scalp due to Staphylococcus aureus. Histopathological studies reveal perifollicular inflammation around the upper portions of the follicles sparing the hair root level. Within areas of inflammation, several follicles converge toward a common follicular duct with a widely dilated opening. Currently, tufted hair folliculitis is considered a variant of folliculitis decalvans of Quinquaud. Staphylococcal infection is believed to be an initial causative factor, and underlying differences in follicular anatomy or host response may be important in determining which reaction pattern occurs in an affected individual. The development of atrophy with loss of adnexal structures (in folliculitis decalvans) or of hair tufts (in tufting folliculitis) may depend upon the depth and destructive potential of the inflammatory process. The therapeutic approach is problematic; prolonged treatment with oral antibiotics may stabilize the disease, but good and at times more definitive results (as in the presented case) have been reported after radical surgical excision of the involved areas.

The Origin of Mucosal Immunity: Lessons from the Holobiont Hydra.

PubMed

Schröder, Katja; Bosch, Thomas C G

2016-11-01

Historically, mucosal immunity-i.e., the portion of the immune system that protects an organism's various mucous membranes from invasion by potentially pathogenic microbes-has been studied in single-cell epithelia in the gastrointestinal and upper respiratory tracts of vertebrates. Phylogenetically, mucosal surfaces appeared for the first time about 560 million years ago in members of the phylum Cnidaria. There are remarkable similarities and shared functions of mucosal immunity in vertebrates and innate immunity in cnidarians, such as Hydra species. Here, we propose a common origin for both systems and review observations that indicate that the ultimately simple holobiont Hydra provides both a new perspective on the relationship between bacteria and animal cells and a new prism for viewing the emergence and evolution of epithelial tissue-based innate immunity. In addition, recent breakthroughs in our understanding of immune responses in Hydra polyps reared under defined short-term gnotobiotic conditions open up the potential of Hydra as an animal research model for the study of common mucosal disorders. Copyright © 2016 Schröder and Bosch.

Solar project description for environmental partnership, Upper Freehold Township, Monmouth County, New Jersey

NASA Astrophysics Data System (ADS)

1982-08-01

A solar house is described. It is a three-story single family detached residence in New Jersey. It is equipped with a 540 cubic foot vented Trombe wall constructed of concrete filled concrete blocks and glazed with 344 square feet of insulated tempered glass. Heat is also provided by a 168 square foot sunspace of insulated glass. In the loft area is a phase change storage system composed of 32 PSI Thermal-81 phase change storage rods. Auxiliary heating is y a wood-burning stove and a dual-fuel, propane and wood, forced air furnace. A breadbox type hot water preheater is located on the roof. Summer cooling is accomplished by opening windows, doors, and exhaust dampers and operating a whole house ventilation fan. Operation of the solar system and the auxiliary subsystems may involve one or more of 5 modes: collector-to-storage, storage-to-space heating, auxiliary-to-space heating, energy-to-load-summer cooling, and domestic hot water. The house, its solar heating systems, storage, load, operation, on-site performance evaluation instrumentation, and data depicting the solar portion of construction costs are outlined.

Summary of studies supporting cumulative effects analysis of upper Yellowstone River channel modifications

USGS Publications Warehouse

Auble, Gregor T.; Bowen, Zachary H.; Bovee, Ken D.; Farmer, Adrian H.; Sexton, Natalie R.; Waddle, Terry J.

2004-01-01

The largest portion of the document is an Appendix that summarizes each of the individual scientific studies in terms of scope and methods, findings, principal variables, and metrics used in the study or suggested by the study results, and important needs for further study.

High-Resolution View of Cross-Section Through a Mars Ripple

NASA Image and Video Library

2012-10-11

This image shows the wall of a scuffmark NASA Curiosity made in a windblown ripple of Martian sand with its wheel. The upper half of the image shows a small portion of the side wall of the scuff and a little bit of the floor of the scuff.

10 CFR 61.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE General Provisions § 61.... Disposal site means that portion of a land disposal facility which is used for disposal of waste. It... facility means a land disposal facility in which radioactive waste is disposed of in or within the upper 30...

10 CFR 61.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE General Provisions § 61.... Disposal site means that portion of a land disposal facility which is used for disposal of waste. It... facility means a land disposal facility in which radioactive waste is disposed of in or within the upper 30...

10 CFR 61.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE General Provisions § 61.... Disposal site means that portion of a land disposal facility which is used for disposal of waste. It... facility means a land disposal facility in which radioactive waste is disposed of in or within the upper 30...

10 CFR 61.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE General Provisions § 61.... Disposal site means that portion of a land disposal facility which is used for disposal of waste. It... facility means a land disposal facility in which radioactive waste is disposed of in or within the upper 30...

10 CFR 61.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE General Provisions § 61.... Disposal site means that portion of a land disposal facility which is used for disposal of waste. It... facility means a land disposal facility in which radioactive waste is disposed of in or within the upper 30...

6. INTERIOR OF LIVING ROOM SHOWING OPEN DOORWAY TO KITCHEN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR OF LIVING ROOM SHOWING OPEN DOORWAY TO KITCHEN AT PHOTO CENTER, FLUSH FRONT DOOR WITH GLAZING AT PHOTO RIGHT, AND OPEN PANELED DOOR TO BEDROOM NO. 2 AT LEFT PHOTO CENTER. DECORATIVE WOOD STRIPPING ON WALLS AND CEILING IS CARRIED THROUGHOUT REST OF ORIGINAL PORTION OF HOUSE. VIEW TO NORTH. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

Flow chamber

DOEpatents

Morozov, Victor [Manassas, VA

2011-01-18

A flow chamber having a vacuum chamber and a specimen chamber. The specimen chamber may have an opening through which a fluid may be introduced and an opening through which the fluid may exit. The vacuum chamber may have an opening through which contents of the vacuum chamber may be evacuated. A portion of the flow chamber may be flexible, and a vacuum may be used to hold the components of the flow chamber together.

18. BATHROOM INTERIOR SHOWING OPEN DOOR TO SOUTH BEDROOM AT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. BATHROOM INTERIOR SHOWING OPEN DOOR TO SOUTH BEDROOM AT PHOTO CENTER, TOILET AT EXTREME PHOTO RIGHT BOTTOM, OPEN DOOR TO MEDICINE CABINET AT PHOTO RIGHT. A WALLPAPER WAINSCOT COVERS THE LOWER PORTION OF THE ORIGINAL FIBERBOARD WALL COVERING. THE FLOOR IS LINOLEUM. VIEW TO SOUTHEAST. - Big Creek Hydroelectric System, Big Creek Town, Operator House, Orchard Avenue south of Huntington Lake Road, Big Creek, Fresno County, CA

Specific leaf areas of the tank bromeliad Guzmania monostachia perform distinct functions in response to water shortage.

PubMed

Freschi, Luciano; Takahashi, Cassia Ayumi; Cambui, Camila Aguetoni; Semprebom, Thais Ribeiro; Cruz, Aline Bertinatto; Mioto, Paulo Tamoso; de Melo Versieux, Leonardo; Calvente, Alice; Latansio-Aidar, Sabrina Ribeiro; Aidar, Marcos Pereira Marinho; Mercier, Helenice

2010-05-01

Leaves comprise most of the vegetative body of tank bromeliads and are usually subjected to strong longitudinal gradients. For instance, while the leaf base is in contact with the water accumulated in the tank, the more light-exposed middle and upper leaf sections have no direct access to this water reservoir. Therefore, the present study attempted to investigate whether different leaf portions of Guzmania monostachia, a tank-forming C(3)-CAM bromeliad, play distinct physiological roles in response to water shortage, which is a major abiotic constraint in the epiphytic habitat. Internal and external morphological features, relative water content, pigment composition and the degree of CAM expression were evaluated in basal, middle and apical leaf portions in order to allow the establishment of correlations between the structure and the functional importance of each leaf region. Results indicated that besides marked structural differences, a high level of functional specialization is also present along the leaves of this bromeliad. When the tank water was depleted, the abundant hydrenchyma of basal leaf portions was the main reservoir for maintaining a stable water status in the photosynthetic tissues of the apical region. In contrast, the CAM pathway was intensified specifically in the upper leaf section, which is in agreement with the presence of features more suitable for the occurrence of photosynthesis at this portion. Gas exchange data indicated that internal recycling of respiratory CO(2) accounted for virtually all nighttime acid accumulation, characterizing a typical CAM-idling pathway in the drought-exposed plants. Altogether, these data reveal a remarkable physiological complexity along the leaves of G. monostachia, which might be a key adaptation to the intermittent water supply of the epiphytic niche. Copyright 2009 Elsevier GmbH. All rights reserved.

Portion sizes and obesity: responses of fast-food companies.

PubMed

Young, Lisa R; Nestle, Marion

2007-07-01

Because the sizes of food portions, especially of fast food, have increased in parallel with rising rates of overweight, health authorities have called on fast-food chains to decrease the sizes of menu items. From 2002 to 2006, we examined responses of fast-food chains to such calls by determining the current sizes of sodas, French fries, and hamburgers at three leading chains and comparing them to sizes observed in 1998 and 2002. Although McDonald's recently phased out its largest offerings, current items are similar to 1998 sizes and greatly exceed those offered when the company opened in 1955. Burger King and Wendy's have increased portion sizes, even while health authorities are calling for portion size reductions. Fast-food portions in the United States are larger than in Europe. These observations suggest that voluntary efforts by fast-food companies to reduce portion sizes are unlikely to be effective, and that policy approaches are needed to reduce energy intake from fast food.

Heat Treating Apparatus

DOEpatents

De Saro, Robert; Bateman, Willis

2002-09-10

Apparatus for heat treating a heat treatable material including a housing having an upper opening for receiving a heat treatable material at a first temperature, a lower opening, and a chamber therebetween for heating the heat treatable material to a second temperature higher than the first temperature as the heat treatable material moves through the chamber from the upper to the lower opening. A gas supply assembly is operatively engaged to the housing at the lower opening, and includes a source of gas, a gas delivery assembly for delivering the gas through a plurality of pathways into the housing in countercurrent flow to movement of the heat treatable material, whereby the heat treatable material passes through the lower opening at the second temperature, and a control assembly for controlling conditions within the chamber to enable the heat treatable material to reach the second temperature and pass through the lower opening at the second temperature as a heated material.

Heating subsurface formations by oxidizing fuel on a fuel carrier

DOEpatents

Costello, Michael; Vinegar, Harold J.

2012-10-02

A method of heating a portion of a subsurface formation includes drawing fuel on a fuel carrier through an opening formed in the formation. Oxidant is supplied to the fuel at one or more locations in the opening. The fuel is combusted with the oxidant to provide heat to the formation.

75 FR 6643 - U.S. Air Force Academy Board of Visitors; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... review morale and discipline, social climate, curriculum, instruction, physical equipment, fiscal affairs... next open meeting. The DFO will review all timely submissions with the BoV Chairperson and ensure they... during open portions of this BoV meeting shall be made available upon request. If, after review of timely...

77 FR 3774 - Sunshine Act Meeting Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

.... CONTACT PERSON FOR MORE INFORMATION: Mitch Katz, Office of Public Affairs (202) 326-2180. Recorded Message... Pennsylvania Avenue NW., Washington, DC 20580. STATUS: Part of this meeting will be open to the public. The rest of the meeting will be closed to the public. Matters To Be Considered Portion Open to the Public...

78 FR 73862 - Notice of Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... Floor Hearing Room, Washington, DC. STATUS: A portion of the meeting will be held in open session; the remainder will be held in closed session. MATTERS TO BE CONSIDERED: Open Session 1. Briefing on U.S.--China..., Secretary. [FR Doc. 2013-29373 Filed 12-5-13; 11:15 am] BILLING CODE 6730-01-P ...

Increasing the Openness of Education as an Approach to Promoting Educational Reform and Development

ERIC Educational Resources Information Center

Jinqiu, He

2012-01-01

This paper presents the main content of the portion on "increasing the openness of China's education" in the "National Medium- and Long-Term Educational Reform and Development Guideline (2010-20)" (hereafter abbreviated as the "Guideline") and the key issues studied and discussed in the formulation process. Issues…

Process and apparatus, mainly for burning agricultural plant refuse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bela, B.; Geza, G.; Istvan, C.

1984-05-22

Freshly harvested agricultural materials having a moisture content no greater than 45% by weight are burned in a furnace in which the housing thereof is divided into preburning and afterburning spaces by a baffle wall. The preburning space contains a horizontally arranged first grating adjacent the baffle wall and a second grating adjacent the first and inclined upwardly therefrom and juxtaposed with an inlet in the housing for the introduction at a constant rate of the materials onto the inclined grating, the upper portion of which is fed by a first portion of primary air for the removal of moisturemore » from the materials, while a lower portion of the inclined grating is fed with a second portion of primary air for the air-deficient burning of the dried materials and the production of combustible gases. The horizontal grating is fed with a third portion of primary air for driving the combustible gases along the baffle wall, which acts to deflect the gases in a counterflow to the flow of the materials, the gases mixing with secondary air introduced through at least one air inlet formed in the baffle wall, the mixture being burned completely in the afterburning space.« less

Easy to open? Exploring the 'openability' of hospital food and beverage packaging by older adults.

PubMed

Bell, Alison F; Walton, Karen L; Tapsell, Linda C

2016-03-01

Food is increasingly a packaged commodity, both in the community and in institutionalised settings such as hospitals, where many older people are malnourished. Previous research with patients aged over 65 years in NSW public hospitals identified difficulties opening milk, water, juices, cereal and tetra packs. The aim of this paper was to assess the ability of well older people living in the community to open food and beverage items routinely used in NSW hospitals in order to gain further insights into the older person/pack interaction and the role of hand and finger strength in pack opening. A sample of 40 older people in good health aged over 65 years from 3 community settings participated in the study. The attempts at pack opening were observed, the time taken to open the pack was measured and the correlation between grip and pinch strengths with opening times was determined. Tetra packs, water bottles, cereal, fruit cups, desserts, biscuits and cheese portions appeared to be the most difficult food products to open. Ten percent of the sample could not open the water bottles and 39% could not open cheese portions. The results were consistent with the previous research involving hospitalised older adults, adding emphasis to the conclusion that food and beverage packaging can be a potential barrier to adequate nutrition when particular types of packaged products are used in hospitals or the community. The ageing population is rapidly becoming a larger and more important group to consider in the provision of goods and services. Designers, manufacturers and providers of food and beverage products need to consider the needs and abilities of these older consumers to ensure good 'openability' and promote adequate nutritional intakes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Rolamite acceleration sensor

DOEpatents

Abbin, Joseph P.; Briner, Clifton F.; Martin, Samuel B.

1993-01-01

A rolamite acceleration sensor which has a failsafe feature including a housing, a pair of rollers, a tension band wrapped in an S shaped fashion around the rollers, wherein the band has a force-generation cut out and a failsafe cut out or weak portion. The failsafe cut out or weak portion breaks when the sensor is subjected to an excessive acceleration so that the sensor fails in an open circuit (non-conducting) state permanently.

Functional differences between sinusoidal endothelial cells and interlobular or central vein endothelium in rat liver.

PubMed

Yokota, S

1985-05-01

The fine topological relationship between sinus-lining endothelial cells (SLE) and vessel-lining endothelial cells (VLE) at the opening portion of sinusoids into central or interlobular veins of rat liver was studied by a comparison of morphological and functional properties of both types of cells. Three minutes after intravenous injection of formalin-denatured albumin conjugated with horseradish peroxidase (HRP-FDA), liver was perfused with fixative. Chopped sections of the liver (50 micron thick) were incubated in diaminobenzidine-H2O2 medium, followed by processing for electron microscopy. The HRP-FDA was localized in endocytotic vesicles and vacuoles of the SLE and Kupffer cells but not of the VLE lining interlobular or central veins or interlobular arteries. In the opening portion of the sinusoids into these veins, the attenuated cytoplasmic extensions of the SLE containing positive vesicles were in direct contact with squamous process of the VLE having no positive vesicles. The contact was mediated by overlapping junctions. No intermediate cell type between the SLE and VLE in this region or other portions was noted. The results indicate that the habitat of the SLE is exactly isolated from that of the VLE in rat liver and at the transitional portion from sinusoids to veins or arteries they are directly connected with each other by overlapping junctions.

Experiment 2033. Injection Test of Upper EE-3 Fracture Zone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grigsby, Charles O.

1983-09-12

This experiment is designed to investigate the apparent lithologic boundary between the low-opening-pressure fracture system (upper EE-3 fracture and Phase I system) and the high-opening-pressure fracture system (lower fracture in EE-3 and in EE-2). The experiment will test for resistence to breakthrough into the lower EE-2 fracture system at relatively low pressure and will define the veting behavior of the low pressure system.

Compact reaction cell for homogenizing and down-blending highly enriched uranium metal

DOEpatents

McLean, W. II; Miller, P.E.; Horton, J.A.

1995-05-02

The invention is a specialized reaction cell for converting uranium metal to uranium oxide. In a preferred form, the reaction cell comprises a reaction chamber with increasing diameter along its length (e.g. a cylindrical chamber having a diameter of about 2 inches in a lower portion and having a diameter of from about 4 to about 12 inches in an upper portion). Such dimensions are important to achieve the necessary conversion while at the same time affording criticality control and transportability of the cell and product. The reaction chamber further comprises an upper port and a lower port, the lower port allowing for the entry of reactant gases into the reaction chamber, the upper port allowing for the exit of gases from the reaction chamber. A diffuser plate is attached to the lower port of the reaction chamber and serves to shape the flow of gas into the reaction chamber. The reaction cell further comprises means for introducing gases into the reaction chamber and a heating means capable of heating the contents of the reaction chamber. The present invention also relates to a method for converting uranium metal to uranium oxide in the reaction cell of the present invention. The invention is useful for down-blending highly enriched uranium metal by the simultaneous conversion of highly enriched uranium metal and natural or depleted uranium metal to uranium oxide within the reaction cell. 4 figs.

Compact reaction cell for homogenizing and down-blanding highly enriched uranium metal

DOEpatents

McLean, II, William; Miller, Philip E.; Horton, James A.

1995-01-01

The invention is a specialized reaction cell for converting uranium metal to uranium oxide. In a preferred form, the reaction cell comprises a reaction chamber with increasing diameter along its length (e.g. a cylindrical chamber having a diameter of about 2 inches in a lower portion and having a diameter of from about 4 to about 12 inches in an upper portion). Such dimensions are important to achieve the necessary conversion while at the same time affording criticality control and transportability of the cell and product. The reaction chamber further comprises an upper port and a lower port, the lower port allowing for the entry of reactant gasses into the reaction chamber, the upper port allowing for the exit of gasses from the reaction chamber. A diffuser plate is attached to the lower port of the reaction chamber and serves to shape the flow of gas into the reaction chamber. The reaction cell further comprises means for introducing gasses into the reaction chamber and a heating means capable of heating the contents of the reaction chamber. The present invention also relates to a method for converting uranium metal to uranium oxide in the reaction cell of the present invention. The invention is useful for down-blending highly enriched uranium metal by the simultaneous conversion of highly enriched uranium metal and natural or depleted uranium metal to uranium oxide within the reaction cell.

Alighting of Tabanidae and muscids on natural and simulated hosts in the Sudan.

PubMed

Mohamed-Ahmed, M M; Mihok, S

2009-12-01

Alighting of horse flies (Diptera: Tabanidae) and non-biting muscids (Diptera: Muscidae) was studied at Khartoum, Sudan, using black cylindrical models mimicking a goat, calf and cow. Flies were intercepted by attaching electrocution grids or clear adhesive film to models. Alighting sites and defensive behaviour were also documented on hosts through observation. Female Tabanus sufis (Jennicke), T. taeniola (Palisot) and Atylotus agrestis (Wiedemann) were the main tabanids captured. Muscids landed in equal numbers on all sizes of models. They had a strong preference for the upper portions of both models and hosts. Landings of T. taeniola and A. agrestis increased with model size, but not so for T. sufis. T. taeniola and A. agrestis scarcely alighted on the legs of models whereas 60-78% of T. sufis did so. Landings of T. sufis on artificial legs did not vary with model size. Landings of all tabanids on the lower and upper portions of a model increased with model size. For both hosts and models, most tabanids (88-98%) alighted on the lower half and legs. Most muscids (63-89%) alighted on the upper half. Landing of tabanids on the cow was 34.9 and 69.3 times greater than that on the calf and goat, respectively. These results are discussed in relation to strategies for the control of blood-sucking flies associated with farm animals using either insecticide-treated live baits or their mimics.

Fluidized bed heat exchanger utilizing angularly extending heat exchange tubes

DOEpatents

Talmud, Fred M.; Garcia-Mallol, Juan-Antonio

1980-01-01

A fluidized bed heat exchanger in which air is passed through a bed of particulate material containing fuel disposed in a housing. A steam/water natural circulation system is provided and includes a steam drum disposed adjacent the fluidized bed and a series of tubes connected at one end to the steam drum. A portion of the tubes are connected to a water drum and in the path of the air and the gaseous products of combustion exiting from the bed. Another portion of the tubes pass through the bed and extend at an angle to the upper surface of the bed.

Landslide in Coprates

NASA Technical Reports Server (NTRS)

2004-01-01

This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows part of a large landslide complex off the north wall of Coprates Chasma in the Valles Marineris trough complex. The wall of Coprates Chasma occupies much of the upper and middle portions of the image; the landslide lobes are on the trough floor in the bottom half of the image. Large boulders the size of houses can be seen on these landslide surfaces. This image is located near 13.9 S, 56.7 W. The picture covers an area about 3 km (1.9 mi) wide. Sunlight illuminates the scene from the upper left.

Ripples and Dunes

NASA Technical Reports Server (NTRS)

2006-01-01

21 July 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a small portion of the floor of Kaiser Crater in the Noachis Terra region, Mars. The terrain in the upper (northern) half of the image is covered by large windblown ripples and a few smoother-surfaced sand dunes. The dominant winds responsible for these features blew from the west/southwest (left/lower left).

Location near: 47.2oS, 341.3oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern Winter

3D architecture modeling of reservoir compartments in a Shingled Turbidite Reservoir using high-resolution seismic data and sparse well control, example from Mars {open_quotes}Pink{close_quotes} reservoir, Mississippi Canyon Area, Gulf of Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapin, M.A.; Mahaffie, M.J.; Tiller, G.M.

1996-12-31

Economics of most deep-water development projects require large reservoir volumes to be drained with relatively few wells. The presence of reservoir compartments must therefore be detected and planned for in a pre-development stage. We have used 3-D seismic data to constrain large-scale, deterministic reservoir bodies in a 3-D architecture model of Pliocene-turbidite sands of the {open_quotes}E{close_quotes} or {open_quotes}Pink{close_quotes} reservoir, Prospect Mars, Mississippi Canyon Areas 763 and 807, Gulf of Mexico. Reservoir compartmentalization is influenced by stratigraphic shingling, which in turn is caused by low accommodation space predentin the upper portion of a ponded seismic sequence within a salt withdrawal mini-basin.more » The accumulation is limited by updip onlap onto a condensed section marl, and by lateral truncation by a large scale submarine erosion surface. Compartments were suggested by RFT pressure variations and by geochemical analysis of RFT fluid samples. A geological interpretation derived from high-resolution 3-D seismic and three wells was linked to 3-D architecture models through seismic inversion, resulting in a reservoir all available data. Distinguishing subtle stratigraphical shingles from faults was accomplished by detailed, loop-level mapping, and was important to characterize the different types of reservoir compartments. Seismic inversion was used to detune the seismic amplitude, adjust sandbody thickness, and update the rock properties. Recent development wells confirm the architectural style identified. This modeling project illustrates how high-quality seismic data and architecture models can be combined in a pre-development phase of a prospect, in order to optimize well placement.« less

3D architecture modeling of reservoir compartments in a Shingled Turbidite Reservoir using high-resolution seismic data and sparse well control, example from Mars [open quotes]Pink[close quotes] reservoir, Mississippi Canyon Area, Gulf of Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapin, M.A.; Mahaffie, M.J.; Tiller, G.M.

1996-01-01

Economics of most deep-water development projects require large reservoir volumes to be drained with relatively few wells. The presence of reservoir compartments must therefore be detected and planned for in a pre-development stage. We have used 3-D seismic data to constrain large-scale, deterministic reservoir bodies in a 3-D architecture model of Pliocene-turbidite sands of the [open quotes]E[close quotes] or [open quotes]Pink[close quotes] reservoir, Prospect Mars, Mississippi Canyon Areas 763 and 807, Gulf of Mexico. Reservoir compartmentalization is influenced by stratigraphic shingling, which in turn is caused by low accommodation space predentin the upper portion of a ponded seismic sequence withinmore » a salt withdrawal mini-basin. The accumulation is limited by updip onlap onto a condensed section marl, and by lateral truncation by a large scale submarine erosion surface. Compartments were suggested by RFT pressure variations and by geochemical analysis of RFT fluid samples. A geological interpretation derived from high-resolution 3-D seismic and three wells was linked to 3-D architecture models through seismic inversion, resulting in a reservoir all available data. Distinguishing subtle stratigraphical shingles from faults was accomplished by detailed, loop-level mapping, and was important to characterize the different types of reservoir compartments. Seismic inversion was used to detune the seismic amplitude, adjust sandbody thickness, and update the rock properties. Recent development wells confirm the architectural style identified. This modeling project illustrates how high-quality seismic data and architecture models can be combined in a pre-development phase of a prospect, in order to optimize well placement.« less

Upper Elk Meadows Research Natural Area: guidebook supplement 43

Treesearch

Reid Schuller; Cheshire Mayrsohn

2013-01-01

This guidebook describes Upper Elk Meadows Research Natural Area (RNA), a 90-ha (223-ac) area that supports a mixture of coniferous forest and open, shruband herb-dominated wetlands. The major forest plant association present within Upper Elk Meadows RNA is Pacific silver fir/vine maple/coolwort foamflower (Abies amabilis/Acer circinatum-Tiarella trifoliata...

2. VIEW OF RUINS OF FINE ORE MILL (FEATURE 20), ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW OF RUINS OF FINE ORE MILL (FEATURE 20), FACING NORTH-NORTHWEST. PORTION OF HEADFRAME AND STORAGE TANKS (FEATURE 18) VISIBLE IN UPPER RIGHT CORNER OF PHOTOGRAPH. - Copper Canyon Camp of the International Smelting & Refining Company, Ruins of the Fine Ore Mill, Copper Canyon, Battle Mountain, Lander County, NV

76 FR 77769 - North Finger Grazing Authorization Project, Malheur National Forest, Grant County, OR

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-14

... allotments within the North Finger Landscape. These allotments are within the Upper Deer Creek, Basin Creek... is to authorize grazing on all or portions of the North Finger landscape in such a manner that will... incorporating adaptive management strategies across the North Finger landscape. Adaptive Management is defined...

Fourth Coast-Seaway Systems Requirements Analysis : Volume I - The Role of an Integrated Marine Traffic Information and Control System

DOT National Transportation Integrated Search

1972-03-24

This report summarizes the need for an Integrated Marine Traffic Informaiton and Control System (IMTIC) in the St. Lawrence Seaway. The analytic emphasis is on the Welland Canal to Gulf of St. Lawrence portion of the Seaway system. The Upper Great La...

21 CFR 155.200 - Certain other canned vegetables.

Code of Federal Regulations, 2011 CFR

2011-04-01

... artichoke plant Whole; half or halves or halved; whole hearts; halved hearts; quartered hearts. Asparagus Edible portions of sprouts of the asparagus plant, as follows: 3 and 3/4 in or more of upper end Stalks... water. Asparagus may be canned with added water, asparagus juice, or a mixture of both. For the purposes...

Walking boot assembly

NASA Technical Reports Server (NTRS)

Vykukal, H. C.; Chambers, A. B.; Stjohn, R. H. (Inventor)

1977-01-01

A walking boot assembly particularly suited for use with a positively pressurized spacesuit is presented. A bootie adapted to be secured to the foot of a wearer, an hermetically sealed boot for receiving the bootie having a walking sole, an inner sole, and an upper portion adapted to be attached to an ankle joint of a spacesuit, are also described.

Strategic Planning for Exploration of the Martian Subsurface

NASA Technical Reports Server (NTRS)

Beaty, D. W.; Briggs, G.; Clifford, S. M.

2000-01-01

Exploration of the upper 2-5 km of the martian crust (i.e. the portion that we can realistically envision physically accessing) is a tantalizing prospect. This may provide our best opportunity to advance the three current objectives of the Mars exploration program: Life, Climate, and Resources, with a common theme of water.

54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ADDITION ON LEFT WITH BASE OF EXHAUST STACK, PORTION OF TOPPLED STACK ON LOWER RIGHT IN VIEW, AND UPPER TAILINGS POND BEYOND. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Axially shaped channel and integral flow trippers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crowther, R.L. Jr.; Johansson, E.B.; Matzner, B.

1992-02-11

This patent describes a fuel assembly. It comprises: fuel rods positioned in spaced array by upper and lower tie-plates, and open ended flow channel surrounding the array for conducting coolant upward between a lower support plate having coolant communicated thereto to an upper support grid having a steam/water outlet communicated thereto. The flow channel surrounding the array for conducting coolant about the fuel rods; the open ended channel having a polygon shaped cross section with the channel constituting a closed conduit with flat side sections connected at corners to form the enclosed conduit; means separate from the channel for connectingmore » the upper and lower tie-plates together and maintaining the fuel rods in spaced array independent of the flow channel, the improvement in the flow channel comprising tapered side walls, the tapered side walls extending from an average thick cross section adjacent the lower support plate to an average thin cross section adjacent the upper core grid whereby the channel is reduced in thickness adjacent the upper core grid to correspond with the reduced pressure adjacent the upper core grid.« less

Air lifted and propelled vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, T.E.; Johnson, R.A.

1987-02-17

This patent describes a vehicle which rides on air cushion and which is propelled by air, comprising: upper deck means, having a bottom edge which defines the periphery of an area; a thin, flexible sheet located below the upper deck means, extending beneath the bottom edge and secured beneath the bottom edge for defining a plenum that is defined by and closed off by the upper deck means and the sheet. The deck means is shaped within the area defined by its bottom edge for causing the plenum to always be an open space and the upper deck means ismore » rigid enough to maintain that open condition of the plenum; the sheet being secured in a manner permitting the sheet to pillow when air is pressurized in the plenum; and the sheet being perforated below the upper deck means for permitting exit of air from the plenum at a controllable rate through the perforations; the sheet having a large plurality of the perforations dispersed over most of its area below the upper deck means; each of the perforations being a hole.« less

Post-determined emotion: motor action retrospectively modulates emotional valence of visual images

PubMed Central

Sasaki, Kyoshiro; Yamada, Yuki; Miura, Kayo

2015-01-01

Upward and downward motor actions influence subsequent and ongoing emotional processing in accordance with a space–valence metaphor: positive is up/negative is down. In this study, we examined whether upward and downward motor actions could also affect previous emotional processing. Participants were shown an emotional image on a touch screen. After the image disappeared, they were required to drag a centrally located dot towards a cued area, which was either in the upper or lower portion of the screen. They were then asked to rate the emotional valence of the image using a 7-point scale. We found that the emotional valence of the image was more positive when the cued area was located in the upper portion of the screen. However, this was the case only when the dragging action was required immediately after the image had disappeared. Our findings suggest that when somatic information that is metaphorically associated with an emotion is linked temporally with a visual event, retrospective emotional integration between the visual and somatic events occurs. PMID:25808884