Actual and estimated costs of disposable materials used during surgical procedures.

PubMed

Toyabe, Shin-Ichi; Cao, Pengyu; Kurashima, Sachiko; Nakayama, Yukiko; Ishii, Yuko; Hosoyama, Noriko; Akazawa, Kouhei

2005-07-01

It is difficult to estimate precisely the costs of disposable materials used during surgical operations. To evaluate the actual costs of disposable materials, we calculated the actual costs of disposable materials used in 59 operations by taking account of costs of all disposable materials used for each operation. The costs of the disposable materials varied significantly from operation to operation (US$ 38-4230 per operation), and the median [25-percentile and 75-percentile] of the sum total of disposable material costs of a single operation was found to be US$ 686 [205 and 993]. Multiple regression analysis with a stepwise regression method showed that costs of disposable materials significantly correlated only with operation time (p<0.001). Based on the results, we propose a simple method for estimating costs of disposable materials by measuring operation time, and we found that the method gives reliable results. Since costs of disposable materials used during surgical operations are considerable, precise estimation of the costs is essential for hospital cost accounting. Our method should be useful for planning hospital administration strategies.

Airport Visibility Measuring Systems Elements of Deployment Cost Analysis

DOT National Transportation Integrated Search

1976-09-01

This report analyzes the deployment cost for different visibility measuring systems necessary to satisfy CAT I, II, and II operations. The analysis is based on airport operational requirements and data for commercially available visibility measuring ...

Manual of phosphoric acid fuel cell power plant cost model and computer program

NASA Technical Reports Server (NTRS)

Lu, C. Y.; Alkasab, K. A.

1984-01-01

Cost analysis of phosphoric acid fuel cell power plant includes two parts: a method for estimation of system capital costs, and an economic analysis which determines the levelized annual cost of operating the system used in the capital cost estimation. A FORTRAN computer has been developed for this cost analysis.

Lessons learned - MO&DA at JPL. [Mission Operations and Data Analysis cost reduction of planetary exploration

NASA Technical Reports Server (NTRS)

Handley, Thomas H., Jr.

1993-01-01

The issues of how to avoid future surprise growth in Mission Operations and Data Analysis (MO&DA) costs and how to minimize total MO&DA costs for planetary missions are discussed within the context of JPL mission operations support. It is argued that there is no simple, single solution: the entire Project life-cycle must be addressed. It is concluded that cost models that can predict both MO&DA cost as well as Ground System development costs are needed. The first year MO&DA budget plotted against the total of ground and flight systems developments is shown. In order to better recognize changes and control costs in general, a modified funding line item breakdown is recommended to distinguish between development costs (prelaunch and postlaunch) and MO&DA costs.

Integrated operations/payloads/fleet analysis. Volume 3: System costs. Appendix A: Program direct costs

NASA Technical Reports Server (NTRS)

1971-01-01

Individualized program direct costs for each satellite program are presented. This breakdown provides the activity level dependent costs for each satellite program. The activity level dependent costs, or, more simply, program direct costs, are comprised of the total payload costs (as these costs are strictly program dependent) and the direct launch vehicle costs. Only those incremental launch vehicle costs associated directly with the satellite program are considered. For expendable launch vehicles the direct costs include the vehicle investment hardware costs and the launch operations costs. For the reusable STS vehicles the direct costs include only the launch operations, recovery operations, command and control, vehicle maintenance, and propellant support. The costs associated with amortization of reusable vehicle investment, RDT&E range support, etc., are not included.

A strategy for low cost development of incremental oil in legacy reservoirs

USGS Publications Warehouse

Attanasi, E.D.

2016-01-01

The precipitous decline in oil prices during 2015 has forced operators to search for ways to develop low-cost and low-risk oil reserves. This study examines strategies to low cost development of legacy reservoirs, particularly those which have already implemented a carbon dioxide enhanced oil recovery (CO2 EOR) program. Initially the study examines the occurrence and nature of the distribution of the oil resources that are targets for miscible and near-miscible CO2 EOR programs. The analysis then examines determinants of technical recovery through the analysis of representative clastic and carbonate reservoirs. The economic analysis focusses on delineating the dominant components of investment and operational costs. The concluding sections describe options to maximize the value of assets that the operator of such a legacy reservoir may have that include incremental expansion within the same producing zone and to producing zones that are laterally or stratigraphically near main producing zones. The analysis identified the CO2 recycle plant as the dominant investment cost item and purchased CO2 and liquids management as a dominant operational cost items. Strategies to utilize recycle plants for processing CO2 from multiple producing zones and multiple reservoir units can significantly reduce costs. Industrial sources for CO2 should be investigated as a possibly less costly way of meeting EOR requirements. Implementation of tapered water alternating gas injection schemes can partially mitigate increases in fluid lifting costs.

Assessment of the financial implications for laparoscopic liver surgery: a single-centre UK cost analysis for minor and major hepatectomy.

PubMed

Abu Hilal, Mohammed; Di Fabio, Francesco; Syed, Shareef; Wiltshire, Robert; Dimovska, Eleonora; Turner, David; Primrose, John N; Pearce, Neil W

2013-07-01

Laparoscopic hepatectomy is progressively gaining popularity. However, it is still unclear whether the laparoscopic approach offers cost advantages compared with the open approach, especially when major hepatectomies are required. Data providing useful insights into the costs of the laparoscopic approach for clinicians and hospitals are needed. The aim of this study is to assess the financial implications of the laparoscopic approach for two standardized minor and major hepatectomies: left lateral sectionectomy and right hepatectomy. A cost comparison analysis of patients undergoing laparoscopic right hepatectomy (LRH) and laparoscopic left lateral sectionectomy (LLLS) versus the open counterparts was performed. Data considered for the comparison analysis were operative costs (theatre cost, consumables and surgeon/anaesthetic labour cost), postoperative costs (hospital stay, complication management and readmissions) and overall costs. A total of 149 patients were included: 38 patients underwent LRH and 46 open right hepatectomy (ORH); 46 patients underwent LLLS and 19 open left lateral sectionectomy (OLLS). For LRH the mean operative, postoperative and overall costs were £10,181, £4,037 and £14,218; for ORH the mean operative, postoperative and overall costs were £6,483 (p < 0.0001), £10,304 (p < 0.0001) and £16,787 (p = 0.886). Regarding LLLS, the mean operative, postoperative and overall costs were £5,460, £2,599 and £8,059; for OLLS the mean operative, postoperative and overall costs were £5,841 (p = 0.874), £5,796 (p < 0.0001) and £11,637 (p = 0.0001). Our data support the cost advantage of the laparoscopic approach for left lateral sectionectomy and the cost neutrality for right hepatectomy.

Economic analysis of new space transportation systems: Executive summary

NASA Technical Reports Server (NTRS)

1971-01-01

An economic analysis of alternative space transportation systems is presented. Results indicate that the expendable systems represent modest investments, but the recurring costs of operation would remain high. The space shuttle and tug system requires a substantial investment, but would substantially reduce the recurring costs of operation. Economic benefits and costs of the different systems are also analyzed. Findings are summarized.

Study of short-haul aircraft operating economics. Phase 2: An analysis of the impact of jet modernization on local service airline operating costs

NASA Technical Reports Server (NTRS)

Andrastek, D. A.

1976-01-01

The objectives of this phase of the study were (1) to assess the 10 year operating cost trends of the local service airlines operating in the 1965 through 1974 period, (2) to glean from these trends the technological and operational parameters which were impacted most significantly by the transition to newer pure jet, short haul transports, and effected by changing fuel prices and cost of living indices, and (3) to develop, construct, and evaluate an operating cost forecasting model which would incorporate those factors which best predicted airline total operating cost behavior over that 10-year period.

An analysis of short haul airline operating costs

NASA Technical Reports Server (NTRS)

Kanafani, A.; Taghavi, S.

1975-01-01

The demand and supply characteristics of short haul air transportation systems are investigated in terms of airline operating costs. Direct, indirect, and ground handling costs are included. Supply models of short haul air transportation systems are constructed.

A Prospective Analysis of the Costs, Benefits, and Impacts of U.S. Renewable Portfolio Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mai, Trieu; Wiser, Ryan; Barbose, Galen

This report evaluates the future costs, benefits, and other impacts of renewable energy used to meet current state renewable portfolio standards (RPSs). It also examines a future scenario where RPSs are expanded. The analysis examines changes in electric system costs and retail electricity prices, which include all fixed and operating costs, including capital costs for all renewable, non-renewable, and supporting (e.g., transmission and storage) electric sector infrastructure; fossil fuel, uranium, and biomass fuel costs; and plant operations and maintenance expenditures. The analysis evaluates three specific benefits: air pollution, greenhouse gas emissions, and water use. It also analyzes two other impacts,more » renewable energy workforce and economic development, and natural gas price suppression. This analysis finds that the benefits or renewable energy used to meet RPS polices exceed the costs, even when considering the highest cost and lowest benefit outcomes.« less

Space system operations and support cost analysis using Markov chains

NASA Technical Reports Server (NTRS)

Unal, Resit; Dean, Edwin B.; Moore, Arlene A.; Fairbairn, Robert E.

1990-01-01

This paper evaluates the use of Markov chain process in probabilistic life cycle cost analysis and suggests further uses of the process as a design aid tool. A methodology is developed for estimating operations and support cost and expected life for reusable space transportation systems. Application of the methodology is demonstrated for the case of a hypothetical space transportation vehicle. A sensitivity analysis is carried out to explore the effects of uncertainty in key model inputs.

An Analysis of Organizational and Funding Alternatives for the Armed Force Institute of Pathology

DTIC Science & Technology

2001-07-01

operating cost includes costs for leased space but not the cost of major renovations or depreciation on government-owned facilities. As a result, it...the full costs of operations (labor, supplies and materials, overhead, depreciation , and subcontracts) and provide enough money to ensure replacement of... depreciation of assets), its design was too simple. Cus- tomers were charged a flat rate per item submitted for analysis. Although this does provide a

Study 2.6 operations analysis mission characterization

NASA Technical Reports Server (NTRS)

Wolfe, R. R.

1973-01-01

An analysis of the current operations concepts of NASA and DoD is presented to determine if alternatives exist which may improve the utilization of resources. The final product is intended to show how sensitive these ground rules and design approaches are relative to the total cost of doing business. The results are comparative in nature, and assess one concept against another as opposed to establishing an absolute cost value for program requirements. An assessment of the mission characteristics is explained to clarify the intent, scope, and direction of this effort to improve the understanding of what is to be accomplished. The characterization of missions is oriented toward grouping missions which may offer potential economic benefits by reducing overall program costs. Program costs include design, development, testing, and engineering, recurring unit costs for logistic vehicles, payload costs. and direct operating costs.

Economic analysis and assessment of syngas production using a modeling approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Hakkwan; Parajuli, Prem B.; Yu, Fei

Economic analysis and modeling are essential and important issues for the development of current feedstock and process technology for bio-gasification. The objective of this study was to develop an economic model and apply to predict the unit cost of syngas production from a micro-scale bio-gasification facility. An economic model was programmed in C++ computer programming language and developed using a parametric cost approach, which included processes to calculate the total capital costs and the total operating costs. The model used measured economic data from the bio-gasification facility at Mississippi State University. The modeling results showed that the unit cost ofmore » syngas production was $1.217 for a 60 Nm-3 h-1 capacity bio-gasifier. The operating cost was the major part of the total production cost. The equipment purchase cost and the labor cost were the largest part of the total capital cost and the total operating cost, respectively. Sensitivity analysis indicated that labor costs rank the top as followed by equipment cost, loan life, feedstock cost, interest rate, utility cost, and waste treatment cost. The unit cost of syngas production increased with the increase of all parameters with exception of loan life. The annual cost regarding equipment, labor, feedstock, waste treatment, and utility cost showed a linear relationship with percent changes, while loan life and annual interest rate showed a non-linear relationship. This study provides the useful information for economic analysis and assessment of the syngas production using a modeling approach.« less

Space station (modular) mission analysis. Volume 1: Mission analysis

NASA Technical Reports Server (NTRS)

1971-01-01

The mission analysis on the modular space station considers experimental requirements and options characterized by low initial cost and incremental manning. Features that affect initial development and early operating costs are identified and their impacts on the program are assessed. Considered are the areas of experiment, mission, operations, information management, and long life and safety analyses.

Societal costs in displaced transverse olecranon fractures: using decision analysis tools to find the most cost-effective strategy between tension band wiring and locked plating.

PubMed

Francis, Tittu; Washington, Travis; Srivastava, Karan; Moutzouros, Vasilios; Makhni, Eric C; Hakeos, William

2017-11-01

Tension band wiring (TBW) and locked plating are common treatment options for Mayo IIA olecranon fractures. Clinical trials have shown excellent functional outcomes with both techniques. Although TBW implants are significantly less expensive than a locked olecranon plate, TBW often requires an additional operation for implant removal. To choose the most cost-effective treatment strategy, surgeons must understand how implant costs and return to the operating room influence the most cost-effective strategy. This cost-effective analysis study explored the optimal treatment strategies by using decision analysis tools. An expected-value decision tree was constructed to estimate costs based on the 2 implant choices. Values for critical variables, such as implant removal rate, were obtained from the literature. A Monte Carlo simulation consisting of 100,000 trials was used to incorporate variability in medical costs and implant removal rates. Sensitivity analysis and strategy tables were used to show how different variables influence the most cost-effective strategy. TBW was the most cost-effective strategy, with a cost savings of approximately $1300. TBW was also the dominant strategy by being the most cost-effective solution in 63% of the Monte Carlo trials. Sensitivity analysis identified implant costs for plate fixation and surgical costs for implant removal as the most sensitive parameters influencing the cost-effective strategy. Strategy tables showed the most cost-effective solution as 2 parameters vary simultaneously. TBW is the most cost-effective strategy in treating Mayo IIA olecranon fractures despite a higher rate of return to the operating room. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Life Cycle Costs in Education: Operations & Maintenance Considered.

ERIC Educational Resources Information Center

Moussatche, Helena; Languell-Urquhart, Jennifer; Woodson, Carol

2000-01-01

Discusses life cycle cost analysis when deciding on flooring finishes and examines operations and maintenance cost effectiveness relative to hard, resilient, and soft flooring. A chart of evaluated flooring materials' characteristics, appropriate maintenance procedures, and recommended frequency is included. (GR)

Cost and Information Effectiveness Analysis (CIEA): A Methodology for Evaluating a Training Device Operational Readiness Assessment Capability (DORAC).

DTIC Science & Technology

1981-02-01

Report 528 COST AIND I*FO•?JidTH ?i EFFECT•• ES1BS ANALYSIS (CDEA): A METiBLOBU Y FOR EVALUATIN1G A TRAINING DEMCE OPERATMDN1AL MAEA3 ],SE 3SSESS$ iElT ...8217, N. Within a military setting, the uses of training devices in performance evaluation have generally mirrored civilian uses and primarily...Technical Report 528 COST AND INFORMATION EFFECTIVENESS ANALYSIS (CIEA): A METHODOLOGY FOR EVALUATING A TRAINING DEVICE OPERATIONAL READINESS

Machine cost analysis using the traditional machine-rate method and ChargeOut!

Treesearch

E. M. (Ted) Bilek

2009-01-01

Forestry operations require ever more use of expensive capital equipment. Mechanization is frequently necessary to perform cost-effective and safe operations. Increased capital should mean more sophisticated capital costing methodologies. However the machine rate method, which is the costing methodology most frequently used, dates back to 1942. CHARGEOUT!, a recently...

IUS/TUG orbital operations and mission support study. Volume 2: Interim upper stage operations

NASA Technical Reports Server (NTRS)

1975-01-01

Background data and study results are presented for the interim upper stage (IUS) operations phase of the IUS/tug orbital operations study. The study was conducted to develop IUS operational concepts and an IUS baseline operations plan, and to provide cost estimates for IUS operations. The approach used was to compile and evaluate baseline concepts, definitions, and system, and to use that data as a basis for the IUS operations phase definition, analysis, and costing analysis. Both expendable and reusable IUS configurations were analyzed and two autonomy levels were specified for each configuration. Topics discussed include on-orbit operations and interfaces with the orbiter, the tracking and data relay satellites and ground station support capability analysis, and flight control center sizing to support the IUS operations.

Operations and support cost modeling using Markov chains

NASA Technical Reports Server (NTRS)

Unal, Resit

1989-01-01

Systems for future missions will be selected with life cycle costs (LCC) as a primary evaluation criterion. This reflects the current realization that only systems which are considered affordable will be built in the future due to the national budget constaints. Such an environment calls for innovative cost modeling techniques which address all of the phases a space system goes through during its life cycle, namely: design and development, fabrication, operations and support; and retirement. A significant portion of the LCC for reusable systems are generated during the operations and support phase (OS). Typically, OS costs can account for 60 to 80 percent of the total LCC. Clearly, OS costs are wholly determined or at least strongly influenced by decisions made during the design and development phases of the project. As a result OS costs need to be considered and estimated early in the conceptual phase. To be effective, an OS cost estimating model needs to account for actual instead of ideal processes by associating cost elements with probabilities. One approach that may be suitable for OS cost modeling is the use of the Markov Chain Process. Markov chains are an important method of probabilistic analysis for operations research analysts but they are rarely used for life cycle cost analysis. This research effort evaluates the use of Markov Chains in LCC analysis by developing OS cost model for a hypothetical reusable space transportation vehicle (HSTV) and suggests further uses of the Markov Chain process as a design-aid tool.

Interpreting cost of ownership for mix-and-match lithography

NASA Astrophysics Data System (ADS)

Levine, Alan L.; Bergendahl, Albert S.

1994-05-01

Cost of ownership modeling is a critical and emerging tool that provides significant insight into the ways to optimize device manufacturing costs. The development of a model to deal with a particular application, mix-and-match lithography, was performed in order to determine the level of cost savings and the optimum ways to create these savings. The use of sensitivity analysis with cost of ownership allows the user to make accurate trade-offs between technology and cost. The use and interpretation of the model results are described in this paper. Parameters analyzed include several manufacturing considerations -- depreciation, maintenance, engineering and operator labor, floorspace, resist, consumables and reticles. Inherent in this study is the ability to customize this analysis for a particular operating environment. Results demonstrate the clear advantages of a mix-and-match approach for three different operating environments. These case studies also demonstrate various methods to efficiently optimize cost savings strategies.

Effect of Resident Involvement on Operative Time and Operating Room Staffing Costs.

PubMed

Allen, Robert William; Pruitt, Mark; Taaffe, Kevin M

The operating room (OR) is a major driver of hospital costs; therefore, operative time is an expensive resource. The training of surgical residents must include time spent in the OR, but that experience comes with a cost to the surgeon and hospital. The objective of this article is to determine the effect of surgical resident involvement in the OR on operative time and subsequent hospital labor costs. The Kruskal-Wallis statistical test is used to determine whether or not there is a difference in operative times between 2 groups of cases (with residents and without residents). This difference leads to an increased cost in associated hospital labor costs for the group with the longer operative time. Cases were performed at Greenville Memorial Hospital. Greenville Memorial Hospital is part of the larger healthcare system, Greenville Health System, located in Greenville, SC and is a level 1 trauma center with up to 33 staffed ORs. A total of 84,997 cases were performed at the partnering hospital between January 1st, 2011 and July 31st, 2015. Cases were only chosen for analysis if there was only one CPT code associated with the case and there were more than 5 observations for each group being studied. This article presents a comprehensive retrospective analysis of 29,134 cases covering 246 procedures. The analysis shows that 45 procedures took significantly longer with a resident present in the room. The average increase in operative time was 4.8 minutes and the cost per minute of extra operative time was determined to be $9.57 per minute. OR labor costs at the partnering hospital was found to be $2,257,433, or $492,889 per year. Knowing the affect on operative time and OR costs allows managers to make smart decisions when considering alternative educational and training techniques. In addition, knowing the connection between residents in the room and surgical duration could help provide better estimates of surgical time in the future and increase the predictability of procedure duration. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

A preliminary benefit-cost study of a Sandia wind farm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ehlen, Mark Andrew; Griffin, Taylor; Loose, Verne W.

In response to federal mandates and incentives for renewable energy, Sandia National Laboratories conducted a feasibility study of installing an on-site wind farm on Sandia National Laboratories and Kirtland Air Force Base property. This report describes this preliminary analysis of the costs and benefits of installing and operating a 15-turbine, 30-MW-capacity wind farm that delivers an estimated 16 percent of 2010 onsite demand. The report first describes market and non-market economic costs and benefits associated with operating a wind farm, and then uses a standard life-cycle costing and benefit-cost framework to estimate the costs and benefits of a wind farm.more » Based on these 'best-estimates' of costs and benefits and on factor, uncertainty and sensitivity analysis, the analysis results suggest that the benefits of a Sandia wind farm are greater than its costs. The analysis techniques used herein are applicable to the economic assessment of most if not all forms of renewable energy.« less

Cost Analysis and Overhead Charges at a Major Research University. AIR Forum 1982 Paper.

ERIC Educational Resources Information Center

Young, Michael E.; Geason, Ronald W.

The development of a cost allocation model at Ohio State University is discussed. The model was designed to measure the direct, indirect, and total operating costs of university operations and to recover general fund overhead costs associated with unrestricted general fund support of auxiliary enterprises and revenue-generating activities. The…

Analysis of space tug operating techniques (study 2.4). Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1972-01-01

The costs of tug refurbishment were studied, using existing cost estimating relationships, to establish the cost of maintaining the reusable third stage of the space transportation system. Refurbishment operations sheets which describe the actual tasks that are necessary to keep the equipment functioning properly were used along with refurbishment operations sheets which contain all of the pertinent descriptive information for each of the major vehicle areas. Tug refurbishment costs per mission are tabulated.

Cost estimation and analysis using the Sherpa Automated Mine Cost Engineering System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stebbins, P.E.

1993-09-01

The Sherpa Automated Mine Cost Engineering System is a menu-driven software package designed to estimate capital and operating costs for proposed surface mining operations. The program is engineering (as opposed to statistically) based, meaning that all equipment, manpower, and supply requirements are determined from deposit geology, project design and mine production information using standard engineering techniques. These requirements are used in conjunction with equipment, supply, and labor cost databases internal to the program to estimate all associated costs. Because virtually all on-site cost parameters are interrelated within the program, Sherpa provides an efficient means of examining the impact of changesmore » in the equipment mix on total capital and operating costs. If any aspect of the operation is changed, Sherpa immediately adjusts all related aspects as necessary. For instance, if the user wishes to examine the cost ramifications of selecting larger trucks, the program not only considers truck purchase and operation costs, it also automatically and immediately adjusts excavator requirements, operator and mechanic needs, repair facility size, haul road construction and maintenance costs, and ancillary equipment specifications.« less

Robotic and endoscopic transaxillary thyroidectomies may be cost prohibitive when compared to standard cervical thyroidectomy: a cost analysis.

PubMed

Cabot, Jennifer C; Lee, Cho Rok; Brunaud, Laurent; Kleiman, David A; Chung, Woong Youn; Fahey, Thomas J; Zarnegar, Rasa

2012-12-01

This study presents a cost analysis of the standard cervical, gasless transaxillary endoscopic, and gasless transaxillary robotic thyroidectomy approaches based on medical costs in the United States. A retrospective review of 140 patients who underwent standard cervical, transaxillary endoscopic, or transaxillary robotic thyroidectomy at 2 tertiary centers was conducted. The cost model included operating room charges, anesthesia fee, consumables cost, equipment depreciation, and maintenance cost. Sensitivity analyses assessed individual cost variables. The mean operative times for the standard cervical, transaxillary endoscopic, and transaxillary robotic approaches were 121 ± 18.9, 185 ± 26.0, and 166 ± 29.4 minutes, respectively. The total cost for the standard cervical, transaxillary endoscopic, and transaxillary robotic approaches were $9,028 ± $891, $12,505 ± $1,222, and $13,670 ± $1,384, respectively. Transaxillary approaches were significantly more expensive than the standard cervical technique (standard cervical/transaxillary endoscopic, P < .0001; standard cervical/transaxillary robotic, P < .0001; and transaxillary endoscopic/transaxillary robotic, P = .001). The transaxillary and standard cervical techniques became equivalent in cost when transaxillary endoscopic operative time decreased to 111 minutes and transaxillary robotic operative time decreased to 68 minutes. Increasing the case load did not resolve the cost difference. Transaxillary endoscopic and transaxillary robotic thyroidectomies are significantly more expensive than the standard cervical approach. Decreasing operative times reduces this cost difference. The greater expense may be prohibitive in countries with a flat reimbursement schedule. Copyright © 2012 Mosby, Inc. All rights reserved.

Spacecraft Autonomy and Automation: A Comparative Analysis of Strategies for Cost Effective Mission Operations

NASA Technical Reports Server (NTRS)

Wright, Nathaniel, Jr.

2000-01-01

The evolution of satellite operations over the last 40 years has drastically changed. October 4, 1957 (during the cold war) the Soviet Union launched the world's first spacecraft into orbit. The Sputnik satellite orbited Earth for three months and catapulted the United States into a race for dominance in space. A year after Sputnik, President Dwight Eisenhower formed the National Space and Aeronautics Administration (NASA). With a team of scientists and engineers, NASA successfully launched Explorer 1, the first US satellite to orbit Earth. During these early years, massive amounts of ground support equipment and operators were required to successfully operate spacecraft vehicles. Today, budget reductions and technological advances have forced new approaches to spacecraft operations. These approaches require increasingly complex, on board spacecraft systems, that enable autonomous operations, resulting in more cost-effective mission operations. NASA's Goddard Space Flight Center, considered world class in satellite development and operations, has developed and operated over 200 satellites during its 40 years of existence. NASA Goddard is adopting several new millennium initiatives that lower operational costs through the spacecraft autonomy and automation. This paper examines NASA's approach to spacecraft autonomy and ground system automation through a comparative analysis of satellite missions for Hubble Space Telescope-HST, Near Earth Asteroid Rendezvous-NEAR, and Solar Heliospheric Observatory-SoHO, with emphasis on cost reduction methods, risk analysis and anomalies and strategies employed for mitigating risk.

Refractory Materials for Flame Deflector Protection System Corrosion Control: Flame Deflector Protection System Life Cycle Cost Analysis Report

NASA Technical Reports Server (NTRS)

Calle, Luz Marina; Hintze, Paul E.; Parlier, Christopher R.; Coffman, Brekke E.; Kolody, Mark R.; Curran, Jerome P.; Trejo, David; Reinschmidt, Ken; Kim, Hyung-Jin

2009-01-01

A 20-year life cycle cost analysis was performed to compare the operational life cycle cost, processing/turnaround timelines, and operations manpower inspection/repair/refurbishment requirements for corrosion protection of the Kennedy Space Center launch pad flame deflector associated with the existing cast-in-place materials and a newer advanced refractory ceramic material. The analysis compared the estimated costs of(1) continuing to use of the current refractory material without any changes; (2) completely reconstructing the flame trench using the current refractory material; and (3) completely reconstructing the flame trench with a new high-performance refractory material. Cost estimates were based on an analysis of the amount of damage that occurs after each launch and an estimate of the average repair cost. Alternative 3 was found to save $32M compared to alternative 1 and $17M compared to alternative 2 over a 20-year life cycle.

An Evaluation of AFIT’s Graduate Programs in Operations Research (GOR) and Strategic and Tactical Sciences (GST).

DTIC Science & Technology

1987-08-01

of economics (e.g., present/future value, costing, cost-benefit analysis, regression analysis, etc.) are scattered throughout the core. Unfortunately...in the subject, largely because most of the problems and examples used are not related to military operations research. Some fundamental -j principles

OpCost: an open-source system for estimating costs of stand-level forest operations

Treesearch

Conor K. Bell; Robert F. Keefe; Jeremy S. Fried

2017-01-01

This report describes and documents the OpCost forest operations cost model, a key component of the BioSum analysis framework. OpCost is available in two editions: as a callable module for use with BioSum, and in a stand-alone edition that can be run directly from R. OpCost model logic and assumptions for this open-source tool are explained, references to the...

Resource modeling: A reality for program cost analysis

NASA Technical Reports Server (NTRS)

Fouts, L. D.; Hurst, R. L. (Principal Investigator)

1979-01-01

The approach, implementation, operation, and utilization of a model to establish capital investment and operational costs for the Program is presented. These are based on their interrelationships, dependencies, and alternative actions.

Operations analysis (study 2.1): Shuttle upper stage software requirements

NASA Technical Reports Server (NTRS)

Wolfe, R. R.

1974-01-01

An investigation of software costs related to space shuttle upper stage operations with emphasis on the additional costs attributable to space servicing was conducted. The questions and problem areas include the following: (1) the key parameters involved with software costs; (2) historical data for extrapolation of future costs; (3) elements of the basic software development effort that are applicable to servicing functions; (4) effect of multiple servicing on complexity of the operation; and (5) are recurring software costs significant. The results address these questions and provide a foundation for estimating software costs based on the costs of similar programs and a series of empirical factors.

Cost and effectiveness analysis on unmanned aerial vehicle (UAV) use at border security

NASA Astrophysics Data System (ADS)

Yilmaz, Bahadır.

2013-06-01

Drones and Remotely Piloted Vehicles are types of Unmanned Aerial Vehicles. UAVs began to be used with the war of Vietnam, they had a great interest when Israel used them in Bekaa Valley Operations of 1982. UAVs have been used by different countries with different aims with the help of emerging technology and investments. In this article, in the context of areas of UAV usage in national security, benefits and disadvantages of UAVs are put forward. Particularly, it has been evaluated on the basis of cost-effectiveness by focusing the use of UAV in the border security. UAVs have been studied by taking cost analysis, procurement and operational costs into consideration. Analysis of effectiveness has been done with illegal passages of people and drugs from flight times of UAVs. Although the procurement cost of the medium-level UAVs is low, its operational costs are high. For this reason, the idea of less costly alternative systems have been revealed for the border security. As the costs are reduced to acceptable level involving national security and border security in future with high-technology products in their structure, it will continue to be used in an increasing proportion.

Low Cost Mission Operations Workshop. [Space Missions

NASA Technical Reports Server (NTRS)

1994-01-01

The presentations given at the Low Cost (Space) Mission Operations (LCMO) Workshop are outlined. The LCMO concepts are covered in four introductory sections: Definition of Mission Operations (OPS); Mission Operations (MOS) Elements; The Operations Concept; and Mission Operations for Two Classes of Missions (operationally simple and complex). Individual presentations cover the following topics: Science Data Processing and Analysis; Mis sion Design, Planning, and Sequencing; Data Transport and Delivery, and Mission Coordination and Engineering Analysis. A list of panelists who participated in the conference is included along with a listing of the contact persons for obtaining more information concerning LCMO at JPL. The presentation of this document is in outline and graphic form.

Nuclear Power Plant Module, NPP-1: Nuclear Power Cost Analysis.

ERIC Educational Resources Information Center

Whitelaw, Robert L.

The purpose of the Nuclear Power Plant Modules, NPP-1, is to determine the total cost of electricity from a nuclear power plant in terms of all the components contributing to cost. The plan of analysis is in five parts: (1) general formulation of the cost equation; (2) capital cost and fixed charges thereon; (3) operational cost for labor,…

Cost analysis helps evaluate contract profitability.

PubMed

Sides, R W

2000-02-01

A cost-accounting analysis can help group practices assess their costs of doing business and determine the profitability of managed care contracts. Group practices also can use cost accounting to develop budgets and financial benchmarks. To begin a cost analysis, group practices need to determine their revenue and cost centers. Then they can allocate their costs to each center, using an appropriate allocation basis. The next step is to calculate costs per procedure. The results can be used to evaluate operational cost efficiency as well as help negotiate managed care contracts.

Managing U.S. Air Force Aircraft Operating and Support Costs: Insights from Recent RAND Analysis and Opportunities for the Future

DTIC Science & Technology

2016-01-01

operating and support (O&S) cost growth: Fuel costs drove 31 percent of overall O&S cost growth, unit-level personnel costs 30 percent, weapon system ...hours. • The root causes of weapon system sustainment costs are war-related effects and aging effects; while the former will diminish with the end of...the cost growth experienced for these large and costly fleets, with a particular focus on weapon system sustainment (WSS) costs.2 We focused on WSS

Future Costs, Benefits, and Impacts of Renewables Used to Meet U.S. Renewable Portfolio Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

This brochure provides a brief overview of the report titled 'A Prospective Analysis of the Costs, Benefits, and Impacts of U.S. Renewable Portfolio Standards.' The report evaluates the future costs, benefits, and other impacts of renewable energy used to meet current state renewable portfolio standards (RPSs). It also examines a future scenario where RPSs are expanded. The analysis examines changes in electric system costs and retail electricity prices, which include all fixed and operating costs, including capital costs for all renewable, non-renewable, and supporting (e.g., transmission and storage) electric sector infrastructure; fossil fuel, uranium, and biomass fuel costs; and plantmore » operations and maintenance expenditures. The analysis evaluates three specific benefits: air pollution, greenhouse gas emissions, and water use. It also analyzes two other impacts, renewable energy workforce and economic development, and natural gas price suppression. The analysis finds that the benefits or renewable energy used to meet RPS polices exceed the costs, even when considering the highest cost and lowest benefit outcomes.« less

The importance of operations, risk, and cost assessment to space transfer systems design

NASA Technical Reports Server (NTRS)

Ball, J. M.; Komerska, R. J.; Rowell, L. F.

1992-01-01

This paper examines several methodologies which contribute to comprehensive subsystem cost estimation. The example of a space-based lunar space transfer vehicle (STV) design is used to illustrate how including both primary and secondary factors into cost affects the decision of whether to use aerobraking or propulsion for earth orbit capture upon lunar return. The expected dominant cost factor in this decision is earth-to-orbit launch cost driven by STV mass. However, to quantify other significant cost factors, this cost comparison included a risk analysis to identify development and testing costs, a Taguchi design of experiments to determine a minimum mass aerobrake design, and a detailed operations analysis. As a result, the predicted cost advantage of aerobraking, while still positive, was subsequently reduced by about 30 percent compared to the simpler mass-based cost estimates.

Higher cost of single incision laparoscopic cholecystectomy due to longer operating time. A study of opportunity cost based on meta-analysis

PubMed Central

GIRABENT-FARRÉS, M.

2018-01-01

Background We aimed to calculate the opportunity cost of the operating time to demonstrate that single incision laparoscopic cholecystectomy (SILC) is more expensive than classic laparoscopic cholecystectomy (CLC). Methods We identified studies comparing use of both techniques during the period 2008–2016, and to calculate the opportunity cost, we performed another search in the same period of time with an economic evaluation of classic laparoscopy. We performed a meta-analysis of the items selected in the first review considering the cost of surgery and surgical time, and we analyzed their differences. We subsequently calculated the opportunity cost of these time differences based on the design of a cost/time variable using the data from the second literature review. Results Twenty-seven articles were selected from the first review: 26 for operating time (3.138 patients) and 3 for the cost of surgery (831 patients), and 3 articles from the second review. Both techniques have similar operating costs. Single incision laparoscopy surgery takes longer (16.90min) to perform (p <0.00001) and this difference represents an opportunity cost of 755.97 € (cost/time unit factor of 44.73 €/min). Conclusions SILC costs the same as CLC, but the surgery takes longer to perform, and this difference involves an opportunity cost that increases the total cost of SILC. The value of the opportunity cost of the operating time can vary the total cost of a surgical technique and it should be included in the economic evaluation to support the decision to adopt a new surgical technique. PMID:29549678

Cost evaluation to optimise radiation therapy implementation in different income settings: A time-driven activity-based analysis.

PubMed

Van Dyk, Jacob; Zubizarreta, Eduardo; Lievens, Yolande

2017-11-01

With increasing recognition of growing cancer incidence globally, efficient means of expanding radiotherapy capacity is imperative, and understanding the factors impacting human and financial needs is valuable. A time-driven activity-based costing analysis was performed, using a base case of 2-machine departments, with defined cost inputs and operating parameters. Four income groups were analysed, ranging from low to high income. Scenario analyses included department size, operating hours, fractionation, treatment complexity, efficiency, and centralised versus decentralised care. The base case cost/course is US$5,368 in HICs, US$2,028 in LICs; the annual operating cost is US$4,595,000 and US$1,736,000, respectively. Economies of scale show cost/course decreasing with increasing department size, mainly related to the equipment cost and most prominent up to 3 linacs. The cost in HICs is two or three times as high as in U-MICs or LICs, respectively. Decreasing operating hours below 8h/day has a dramatic impact on the cost/course. IMRT increases the cost/course by 22%. Centralising preparatory activities has a moderate impact on the costs. The results indicate trends that are useful for optimising local and regional circumstances. This methodology can provide input into a uniform and accepted approach to evaluating the cost of radiotherapy. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Cost Analysis of Operation Theatre Services at an Apex Tertiary Care Trauma Centre of India.

PubMed

Siddharth, Vijaydeep; Kumar, Subodh; Vij, Aarti; Gupta, Shakti Kumar

2015-12-01

Operating room services are one of the major cost and revenue-generating centres of a hospital. The cost associated with the provisioning of operating department services depends on the resources consumed and the unit costs of those resources. The objective of this study was to calculate the cost of operation theatre services at Jai Prakash Narayan Apex Trauma Centre, AIIMS, New Delhi. The study was carried out at the operation theatre department of Jai Prakash Narayan Apex Trauma Centre (JPNATC), AIIMS from April 2010 to March 2011 after obtaining approval from concerned authorities. This study was observational and descriptive in nature. Traditional (average or gross) costing methodology was used to arrive at the cost for the provisioning of operation theatre (OT) services. Cost was calculated under two heads; as capital and operating cost. Annualised cost of capital assets was calculated according to the methodology prescribed by the World Health Organization and operating costs were taken on actual basis; thereafter, per day cost of OT services was obtained. The average number of surgeries performed in the trauma centre per day is 13. The annual cost of providing operating room services at JPNATC, New Delhi was calculated to be 197,298,704 Indian rupees (INR) (US$ 3,653,679), while the per hour cost was calculated to be INR 22,626.92 (US$ 419). Majority of the expenditures were for human resource (33.63 %) followed by OT capital cost (31.90 %), consumables (29.97 %), engineering maintenance cost (2.55 %), support services operating cost (1.22 %) and support services capital cost (0.73 %). Of the total cost towards the provisioning of OT services, 32.63 % was capital cost while 67.37 % is operating cost. The results of this costing study will help in the future planning of resource allocation within the financial constraints (US$ 1 = INR 54).

[Cost analysis for navigation in knee endoprosthetics].

PubMed

Cerha, O; Kirschner, S; Günther, K-P; Lützner, J

2009-12-01

Total knee arthroplasty (TKA) is one of the most frequent procedures in orthopaedic surgery. The outcome depends on a range of factors including alignment of the leg and the positioning of the implant in addition to patient-associated factors. Computer-assisted navigation systems can improve the restoration of a neutral leg alignment. This procedure has been established especially in Europe and North America. The additional expenses are not reimbursed in the German DRG system (Diagnosis Related Groups). In the present study a cost analysis of computer-assisted TKA compared to the conventional technique was performed. The acquisition expenses of various navigation systems (5 and 10 year depreciation), annual costs for maintenance and software updates as well as the accompanying costs per operation (consumables, additional operating time) were considered. The additional operating time was determined on the basis of a meta-analysis according to the current literature. Situations with 25, 50, 100, 200 and 500 computer-assisted TKAs per year were simulated. The amount of the incremental costs of the computer-assisted TKA depends mainly on the annual volume and the additional operating time. A relevant decrease of the incremental costs was detected between 50 and 100 procedures per year. In a model with 100 computer-assisted TKAs per year an additional operating time of 14 mins and a 10 year depreciation of the investment costs, the incremental expenses amount to 300-395 depending on the navigation system. Computer-assisted TKA is associated with additional costs. From an economical point of view an amount of more than 50 procedures per year appears to be favourable. The cost-effectiveness could be estimated if long-term results will show a reduction of revisions or a better clinical outcome.

Updating the evidence base on the operational costs of supplementary immunization activities for current and future accelerated disease control, elimination and eradication efforts

PubMed Central

2014-01-01

Background To achieve globally or regionally defined accelerated disease control, elimination and eradication (ADC/E/E) goals against vaccine-preventable diseases requires complementing national routine immunization programs with intensive, time-limited, and targeted Supplementary Immunization Activities (SIAs). Many global and country-level SIA costing efforts have historically relied on what are now outdated benchmark figures. Mobilizing adequate resources for successful implementation of SIAs requires updated estimates of non-vaccine costs per target population. Methods This assessment updates the evidence base on the SIA operational costs through a review of literature between 1992 and 2012, and an analysis of actual expenditures from 142 SIAs conducted between 2004 and 2011 and documented in country immunization plans. These are complemented with an analysis of budgets from 31 SIAs conducted between 2006 and 2011 in order to assess the proportion of total SIA costs per person associated with various cost components. All results are presented in 2010 US dollars. Results Existing evidence indicate that average SIA operational costs were usually less than US$0.50 per person in 2010 dollars. However, the evidence is sparse, non-standardized, and largely out of date. Average operational costs per person generated from our analysis of country immunization plans are consistently higher than published estimates, approaching US$1.00 for injectable vaccines. The results illustrate that the benchmarks often used to project needs underestimate the true costs of SIAs and the analysis suggests that SIA operational costs have been increasing over time in real terms. Our assessment also illustrates that operational costs vary across several dimensions. Variations in the actual costs of SIAs likely to reflect the extents to which economies of scale associated with campaign-based delivery can be attained, the underlying strength of the immunization program, sensitivities to the relative ease of vaccine administration (i.e. orally, or by injection), and differences in disease-specific programmatic approaches. The assessment of SIA budgets by cost component illustrates that four cost drivers make up the largest proportion of costs across all vaccines: human resources, program management, social mobilization, and vehicles and transportation. These findings suggest that SIAs leverage existing health system infrastructure, reinforcing the fact that strong routine immunization programs are an important pre-requisite for achieving ADC/E/E goals. Conclusions The results presented here will be useful for national and global-level actors involved in planning, budgeting, resource mobilization, and financing of SIAs in order to create more realistic assessments of resource requirements for both existing ADC/E/E efforts as well as for new vaccines that may deploy a catch-up campaign-based delivery component. However, limitations of our analysis suggest a need to conduct further research into operational costs of SIAs. Understanding the changing face of delivery costs and cost structures for SIAs will continue to be critical to avoid funding gaps and in order to improve vaccination coverage, reduce health inequities, and achieve the ADC/E/E goals many of which have been endorsed by the World Health Assembly and are included in the Decade of Vaccines Global Vaccine Action Plan. PMID:24450832

Updating the evidence base on the operational costs of supplementary immunization activities for current and future accelerated disease control, elimination and eradication efforts.

PubMed

Gandhi, Gian; Lydon, Patrick

2014-01-22

To achieve globally or regionally defined accelerated disease control, elimination and eradication (ADC/E/E) goals against vaccine-preventable diseases requires complementing national routine immunization programs with intensive, time-limited, and targeted Supplementary Immunization Activities (SIAs). Many global and country-level SIA costing efforts have historically relied on what are now outdated benchmark figures. Mobilizing adequate resources for successful implementation of SIAs requires updated estimates of non-vaccine costs per target population. This assessment updates the evidence base on the SIA operational costs through a review of literature between 1992 and 2012, and an analysis of actual expenditures from 142 SIAs conducted between 2004 and 2011 and documented in country immunization plans. These are complemented with an analysis of budgets from 31 SIAs conducted between 2006 and 2011 in order to assess the proportion of total SIA costs per person associated with various cost components. All results are presented in 2010 US dollars. Existing evidence indicate that average SIA operational costs were usually less than US$0.50 per person in 2010 dollars. However, the evidence is sparse, non-standardized, and largely out of date. Average operational costs per person generated from our analysis of country immunization plans are consistently higher than published estimates, approaching US$1.00 for injectable vaccines. The results illustrate that the benchmarks often used to project needs underestimate the true costs of SIAs and the analysis suggests that SIA operational costs have been increasing over time in real terms. Our assessment also illustrates that operational costs vary across several dimensions. Variations in the actual costs of SIAs likely to reflect the extents to which economies of scale associated with campaign-based delivery can be attained, the underlying strength of the immunization program, sensitivities to the relative ease of vaccine administration (i.e. orally, or by injection), and differences in disease-specific programmatic approaches. The assessment of SIA budgets by cost component illustrates that four cost drivers make up the largest proportion of costs across all vaccines: human resources, program management, social mobilization, and vehicles and transportation. These findings suggest that SIAs leverage existing health system infrastructure, reinforcing the fact that strong routine immunization programs are an important pre-requisite for achieving ADC/E/E goals. The results presented here will be useful for national and global-level actors involved in planning, budgeting, resource mobilization, and financing of SIAs in order to create more realistic assessments of resource requirements for both existing ADC/E/E efforts as well as for new vaccines that may deploy a catch-up campaign-based delivery component. However, limitations of our analysis suggest a need to conduct further research into operational costs of SIAs. Understanding the changing face of delivery costs and cost structures for SIAs will continue to be critical to avoid funding gaps and in order to improve vaccination coverage, reduce health inequities, and achieve the ADC/E/E goals many of which have been endorsed by the World Health Assembly and are included in the Decade of Vaccines Global Vaccine Action Plan.

Cost Benefit and Alternatives Analysis of Distribution Systems with Energy Storage Systems: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Tom; Nagarajan, Adarsh; Baggu, Murali

This paper explores monetized and non-monetized benefits from storage interconnected to distribution system through use cases illustrating potential applications for energy storage in California's electric utility system. This work supports SDG&E in its efforts to quantify, summarize, and compare the cost and benefit streams related to implementation and operation of energy storage on its distribution feeders. This effort develops the cost benefit and alternatives analysis platform, integrated with QSTS feeder simulation capability, and analyzed use cases to explore the cost-benefit of implementation and operation of energy storage for feeder support and market participation.

Defense Commissaries: DOD Needs to Improve Business Processes to Ensure Patron Benefits and Achieve Operational Efficiencies

DTIC Science & Technology

2017-03-01

sales, leverage efficiencies, and achieve savings in commissary operations. Second, DeCA has not conducted cost - benefit analyses for costs ...conduct comprehensive cost - benefit analyses for service contracts and distribution options. DOD concurred with GAO’s first two recommendations and...partially concurred with the third recommendation. GAO continues to believe the cost - benefit analysis recommendation is valid

Systems Operations Studies for Automated Guideway Transit Systems : Quantitative Analysis of Alternative AGT Operational Control Strategies

DOT National Transportation Integrated Search

1981-10-01

The objectives of the Systems Operation Studies (SOS) for automated guideway transit (AGT) systems are to develop models for the analysis of system operations, to evaluate performance and cost, and to establish guidelines for the design and operation...

Cost-Effectiveness Analysis of the Automation of a Circulation System.

ERIC Educational Resources Information Center

Mosley, Isobel

A general methodology for cost effectiveness analysis was developed and applied to the Colorado State University library loan desk. The cost effectiveness of the existing semi-automated circulation system was compared with that of a fully manual one, based on the existing manual subsystem. Faculty users' time and computer operating costs were…

Identification of High Performance, Low Environmental Impact Materials and Processes Using Systematic Substitution (SyS)

NASA Technical Reports Server (NTRS)

Dhooge, P. M.; Nimitz, J. S.

2001-01-01

Process analysis can identify opportunities for efficiency improvement including cost reduction, increased safety, improved quality, and decreased environmental impact. A thorough, systematic approach to materials and process selection is valuable in any analysis. New operations and facilities design offer the best opportunities for proactive cost reduction and environmental improvement, but existing operations and facilities can also benefit greatly. Materials and processes that have been used for many years may be sources of excessive resource use, waste generation, pollution, and cost burden that should be replaced. Operational and purchasing personnel may not recognize some materials and processes as problems. Reasons for materials or process replacement may include quality and efficiency improvements, excessive resource use and waste generation, materials and operational costs, safety (flammability or toxicity), pollution prevention, compatibility with new processes or materials, and new or anticipated regulations.

A Cost Analysis of a Community Health Worker Program in Rural Vermont

PubMed Central

Wang, Guijing; Ruggles, Laural; Dunet, Diane O.

2015-01-01

Studies have shown that community health workers (CHWs) can improve the effectiveness of health care systems; however, little has been reported about CHW program costs. We examined the costs of a program staffed by three CHWs associated with a small, rural hospital in Vermont. We used a standardized data collection tool to compile cost information from administrative data and personal interviews. We analyzed personnel and operational costs from October 2010 to September 2011. The estimated total program cost was $420,348, a figure comprised of $281,063 (67 %) for personnel and $139,285 (33 %) for operations. CHW salaries and office space were the major cost components. Our cost analysis approach may be adapted by others to conduct cost analyses of their CHW program. Our cost estimates can help inform future economic studies of CHW programs and resource allocation decisions. PMID:23794072

Preoperative predictors of increased hospital costs in elective anterior cervical fusions: a single-institution analysis of 1,082 patients.

PubMed

Minhas, Shobhit V; Chow, Ian; Jenkins, Tyler J; Dhingra, Brian; Patel, Alpesh A

2015-05-01

The frequency of anterior cervical fusion (ACF) surgery and total hospital costs in spine surgery have substantially increased in the last several years. To determine which patient comorbidities are associated with increased total hospital costs after elective one- or two-level ACFs. Retrospective cohort analysis. Individuals who have undergone elective one- or two-level ACFs at our single institution. The total number of patients amounted to 1,082. Total hospital costs during single admission. Multivariate linear regression models were used to analyze independent effects of preoperative patient characteristics on total hospital costs. Univariate analysis was used to examine association of these characteristics on operative time, length of hospital stay (LOS), and complications. Age, obesity, and diabetes were independently associated with increased average hospital costs of $1,404 (95% confidence interval [CI], $857-$1,951; p<.001), $681 (95% CI, $285-$1,076; p=.001), and $1,877 (95% CI, $726-$3,072; p=.001), respectively. Age was associated with increased LOS (p<.001) and complications (p<.001) but not operative time (p=.431). Diabetes was associated with increased LOS (p<.001) and complications (p=.042) but not operative time (p=.234). Obesity was not associated with increased LOS (p=.164), complications (p=.890), or operative time (p=.067). This study highlights the patient comorbidities associated with increased hospital costs after one- or two-level ACFs and the potential drivers of these costs. Copyright © 2015 Elsevier Inc. All rights reserved.

GASP- General Aviation Synthesis Program. Volume 7: Economics

NASA Technical Reports Server (NTRS)

1978-01-01

The economic analysis includes: manufacturing costs; labor costs; parts costs; operating costs; markups and consumer price. A user's manual for a computer program to calculate the final consumer price is included.

Prospective Costs, Benefits, and Impacts of U.S. Renewable Portfolio Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heeter, Jenny S; Mai, Trieu T; Bird, Lori A

These slides were presented at a webinar on January 9, 2017. The slides overview a report that evaluates the future costs, benefits, and other impacts of renewable energy used to meet current state renewable portfolio standards (RPSs). It also examines a future scenario where RPSs are expanded. The analysis examines changes in electric system costs and retail electricity prices, which include all fixed and operating costs, including capital costs for all renewable, non-renewable, and supporting (e.g., transmission and storage) electric sector infrastructure; fossil fuel, uranium, and biomass fuel costs; and plant operations and maintenance expenditures. The analysis evaluates three specificmore » benefits: air pollution, greenhouse gas emissions, and water use. It also analyzes two other impacts, renewable energy workforce and economic development, and natural gas price suppression. The analysis finds that the benefits or renewable energy used to meet RPS polices exceed the costs, even when considering the highest cost and lowest benefit outcomes.« less

Adherence to infection control guidelines in surgery on MRSA positive patients : A cost analysis.

PubMed

Saegeman, V; Schuermans, A

2016-09-01

In surgical units, similar to other healthcare departments, guidelines are used to curb transmission of methicillin resistant Staphylococcus aureus (MRSA). The aim of this study was to calculate the extra costs for material and extra working hours for compliance to MRSA infection control guidelines in the operating rooms of a University Hospital. The study was based on observations of surgeries on MRSA positive patients. The average cost per surgery was calculated utilizing local information on unit costs. Robustness of the calculations was evaluated with a sensitivity analysis. The total extra costs of adherence to MRSA infection control guidelines averaged € 340.46 per surgical procedure (range € 207.76- € 473.15). A sensitivity analysis based on a standardized operating room hourly rate reached a cost of € 366.22. The extra costs of adherence to infection control guidelines are considerable. To reduce costs, the logistical planning of surgeries could be improved by for instance a dedicated room.

Solar power satellite. System definition study. Part 1, volume 3: Construction, transportation and cost analyses

NASA Technical Reports Server (NTRS)

1977-01-01

Concepts developed for both LEO and GEO construction of photovoltaic and thermal engine satellites are analyzed. Topics discussed include: satellite construction; crew scheduling; crew jobs and organizations; operator productivity rating; constructability rating; transportation systems for cargo launch, refueling operations, personnel transport, and orbit transfer; collision analysis, cost analysis, and radiation evironment and effects.

Ulipristal acetate for pre-operative treatment of moderate-to-severe uterine fibroids in women of reproductive age in The Netherlands: cost minimization analysis and budget impact analysis.

PubMed

Zakiyah, N; van Asselt, A D I; Postma, M J

2017-03-01

Ulipristal acetate has been found to be non-inferior to other pre-operative treatments of uterine fibroids, particularly leuprolide. The objective of this study was to assess the pharmacoeconomic profile of ulipristal acetate compared to leuprolide for the pre-operative treatment of moderate-to-severe uterine fibroids in women of reproductive age in The Netherlands. The analysis was performed and applied within the framework of the ulipristal acetate submission for reimbursement in 2012. A decision model was developed to compare the total costs of ulipristal acetate compared to leuprolide, the standard care in The Netherlands. The target population of this study corresponded to the type of patients included in the PEARL II clinical trial; i.e. women of reproductive age requiring pre-operative treatment for uterine fibroids. Sensitivity analysis was implemented to assess uncertainties. Data regarding costs, effects, and other input parameters were obtained from relevant published literatures, the Dutch Healthcare Insurance Board, and expert opinion obtained by means of a panel of experts from several medical centers in The Netherlands. In The Netherlands, the total costs of ulipristal acetate and leuprolide were estimated at €4,216,027 and €4,218,095, respectively. The annual savings of ulipristal acetate were, therefore, estimated at €2,068. The major driver of this cost difference was the cost of administration for leuprolide. Sensitivity analyses showed that ulipristal acetate mostly remained cost-saving over a range of assumptions. The budget impact analysis indicated that the introduction of ulipristal acetate was estimated to result in cost savings in the first 3 years following the introduction. The results of this study were used in the decision on reimbursement of ulipristal acetate according to the Dutch Reference Pricing system in 2012. Ulipristal acetate was cost saving compared to leuprolide and has the potential to provide substantial savings on the healthcare budget in The Netherlands.

Economic Impact of Revision Surgery for Proximal Junctional Failure After Adult Spinal Deformity Surgery: A Cost Analysis of 57 Operations in a 10-year Experience at a Major Deformity Center.

PubMed

Theologis, Alexander A; Miller, Liane; Callahan, Matt; Lau, Darryl; Zygourakis, Corinna; Scheer, Justin K; Burch, Shane; Pekmezci, Murat; Chou, Dean; Tay, Bobby; Mummaneni, Praveen; Berven, Sigurd; Deviren, Vedat; Ames, Christopher P

2016-08-15

Retrospective cohort analysis. To evaluate the economic impact of revision surgery for proximal junctional failures (PJF) after thoracolumbar fusions for adult spinal deformity (ASD). PJF after fusions for ASD is a major cause of disability. Although clinical sequelae are described, PJF-revision operation costs are incompletely defined. Consecutive adults who underwent thoracolumbar fusions for ASD (August, 2003 to January, 2013) were evaluated. Inclusion criteria include construct from pelvis to L2 or above and minimum 6 months follow-up after the index ASD operation. Direct costs (surgical supplies/implants, room/care, pharmacy, services) were identified from medical billing data and calculated for index ASD operations and subsequent surgeries for PJF. Not included in direct cost data were indirect costs, charges, surgeon fees, or revision operations for indications other than PJF (i.e., pseudarthrosis). Patients were compared based on the construct's upper-instrumented vertebra: upper thoracic (UT: T1-6) versus thoracolumbar junction (TLjxn: T9-L2). Of 501 patients, 382 met inclusion criteria. Fifty-one patients [UT:14; TLjxn: 40 at index; average follow-up 32.6 months (6-92 months)] had revisions for PJF, which summed to $3.2 million total direct cost. Average direct cost of index operations for the cohort ($68,294) was significantly greater than PJF-revisions ($55,547). Compared with TLjxn, UT had a significantly higher average cost for index operations ($79,860 vs. $65,868). However, PJF-revision cases were similar in average cost (UT:$60,103; TLjxn:$53,920; P = 0.09). Costs of PJF amounted to an additional 12.1% of the total index surgical cost in 382 patients. Revision operations for PJF after long thoracolumbar fusions for ASD are associated with an average direct cost of $55,547 per case. Revision costs for PJF are similar based on the index procedure's upper-instrumented vertebra level. At a major tertiary center over a 10-year period, PJF came at a very significant economic expense amounting to $3.2 million for 57 cases. 3.

Theoretical and experimental researches on the operating costs of a wastewater treatment plant

NASA Astrophysics Data System (ADS)

Panaitescu, M.; Panaitescu, F.-V.; Anton, I.-A.

2015-11-01

Purpose of the work: The total cost of a sewage plants is often determined by the present value method. All of the annual operating costs for each process are converted to the value of today's correspondence and added to the costs of investment for each process, which leads to getting the current net value. The operating costs of the sewage plants are subdivided, in general, in the premises of the investment and operating costs. The latter can be stable (normal operation and maintenance, the establishment of power) or variables (chemical and power sludge treatment and disposal, of effluent charges). For the purpose of evaluating the preliminary costs so that an installation can choose between different alternatives in an incipient phase of a project, can be used cost functions. In this paper will be calculated the operational cost to make several scenarios in order to optimize its. Total operational cost (fixed and variable) is dependent global parameters of wastewater treatment plant. Research and methodology: The wastewater treatment plant costs are subdivided in investment and operating costs. We can use different cost functions to estimate fixed and variable operating costs. In this study we have used the statistical formulas for cost functions. The method which was applied to study the impact of the influent characteristics on the costs is economic analysis. Optimization of plant design consist in firstly, to assess the ability of the smallest design to treat the maximum loading rates to a given effluent quality and, secondly, to compare the cost of the two alternatives for average and maximum loading rates. Results: In this paper we obtained the statistical values for the investment cost functions, operational fixed costs and operational variable costs for wastewater treatment plant and its graphical representations. All costs were compared to the net values. Finally we observe that it is more economical to build a larger plant, especially if maximum loading rates are reached. The actual target of operational management is to directly implement the presented cost functions in a software tool, in which the design of a plant and the simulation of its behaviour are evaluated simultaneously.

A cost analysis of family planning in Bangladesh.

PubMed

Fiedler, J L; Day, L M

1997-01-01

This article presents a step-down cost analysis using secondary data sources from 26 Bangladesh non-government organizations (NGOs) providing family planning services under a US Agency for International Development-funded umbrella organization. The unit costs of the NGOs' Maternal-Child Health (MCH) clinics and community-based distribution (CBD) systems were calculated and found to be minimally different. Several simulations were conducted to investigate the impact of alternative cost-reduction measures. The more general financial analysis proved more insightful than the unit cost analysis in terms of identifying means by which to improve the efficiency of the family planning operations of these NGOs. The analysis revealed that 56 per cent of total expenditures in the two-tiered umbrella's organizational structure are incurred in management operations and overheads. Of the remaining 44 per cent of project expenditures, 39 per cent is spent on the CBD program and 5 per cent on the MCH clinics. Within the CBD program, most resources are spent providing 4 million contacts (two-thirds of the annual total) which do not involve contraceptive re-supply. The clinics devote more resources to providing MCH services than to providing family planning services. The findings suggest that significant savings could be generated by containing administrative costs, improving operational efficiency, and reducing unnecessary or redundant fieldworker contacts. The magnitude of the potential savings raises a fundamental question about the continued viability and sustainability of this supply-driven CBD strategy.

Approaches to Resource Allocation

ERIC Educational Resources Information Center

Dressel, Paul; Simon, Lou Anna Kimsey

1976-01-01

Various budgeting patterns and strategies are currently in use, each with its own particular strengths and weaknesses. Neither cost-benefit analysis nor cost-effectiveness analysis offers any better solution to the allocation problem than do the unsupported contentions of departments or the historical unit costs. An operable model that performs…

The cost of post-operative shed blood salvage after total knee arthroplasty: an analysis of 1,093 consecutive procedures

PubMed Central

Muñoz, Manuel; Ariza, Daniel; Campos, Arturo; Martín-Montañez, Elisa; Pavía, José

2013-01-01

Background Requirements for allogeneic red cell transfusion after total knee arthroplasty are still high (20–50%), and salvage and reinfusion of unwashed, filtered post-operative shed blood is an established method for reducing transfusion requirements following this operation. We performed a cost analysis to ascertain whether this alternative is likely to be cost-effective. Materials and methods Data from 1,093 consecutive primary total knee arthroplasties, managed with (reinfusion group, n=763) or without reinfusion of unwashed salvaged blood (control group, n=330), were retrospectively reviewed. The costs of low-vacuum drains, shed blood collection canisters (Bellovac ABT®, Wellspect HealthCare and ConstaVac CBC II®, Stryker), shed blood reinfusion, acquisition and transfusion of allogeneic red cell concentrate, haemoglobin measurements, and prolonged length of hospital stay were used for the blood management cost analysis. Results Patients in the reinfusion group received 152±64 mL of red blood cells from postoperatively salvaged blood, without clinically relevant incidents, and showed a lower allogeneic transfusion rate (24.5% vs 8.5%, for the control and reinfusion groups, respectively; p =0.001). There were no differences in post-operative infection rates. Patients receiving allogeneic transfusions stayed in hospital longer (+1.9 days [95% CI: 1.2 to 2.6]). As reinfusion of unwashed salvaged blood reduced the allogeneic transfusion rate, both reinfusion systems may provide net savings in different cost scenarios (€ 4.6 to € 106/patient for Bellovac ABT, and € −51.9 to € 49.9/patient for ConstaVac CBCII). Discussion Return of unwashed salvaged blood after total knee arthroplasty seems to save costs in patients with pre-operative haemoglobin between 12 and 15 g/dL. It is not cost-saving in patients with a pre-operative haemoglobin >15 g/dL, whereas in those with a pre-operative haemoglobin <12 g/dL, although cost-saving, its efficacy could be increased by associating some other blood-saving method. PMID:23149145

Applying cost accounting to operating room staffing in otolaryngology: time-driven activity-based costing and outpatient adenotonsillectomy.

PubMed

Balakrishnan, Karthik; Goico, Brian; Arjmand, Ellis M

2015-04-01

(1) To describe the application of a detailed cost-accounting method (time-driven activity-cased costing) to operating room personnel costs, avoiding the proxy use of hospital and provider charges. (2) To model potential cost efficiencies using different staffing models with the case study of outpatient adenotonsillectomy. Prospective cost analysis case study. Tertiary pediatric hospital. All otolaryngology providers and otolaryngology operating room staff at our institution. Time-driven activity-based costing demonstrated precise per-case and per-minute calculation of personnel costs. We identified several areas of unused personnel capacity in a basic staffing model. Per-case personnel costs decreased by 23.2% by allowing a surgeon to run 2 operating rooms, despite doubling all other staff. Further cost reductions up to a total of 26.4% were predicted with additional staffing rearrangements. Time-driven activity-based costing allows detailed understanding of not only personnel costs but also how personnel time is used. This in turn allows testing of alternative staffing models to decrease unused personnel capacity and increase efficiency. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

Cost analysis of the surgical treatment of fractures of the proximal humerus: an evaluation of the determinants of cost and comparison of the institutional cost of treatment with the national tariff.

PubMed

Sabharwal, S; Carter, A W; Rashid, A; Darzi, A; Reilly, P; Gupte, C M

2016-02-01

The aims of this study were to estimate the cost of surgical treatment of fractures of the proximal humerus using a micro-costing methodology, contrast this cost with the national reimbursement tariff and establish the major determinants of cost. A detailed inpatient treatment pathway was constructed using semi-structured interviews with 32 members of hospital staff. Its content validity was established through a Delphi panel evaluation. Costs were calculated using time-driven activity-based costing (TDABC) and sensitivity analysis was performed to evaluate the determinants of cost The mean cost of the different surgical treatments was estimated to be £3282. Although this represented a profit of £1138 against the national tariff, hemiarthroplasty as a treatment choice resulted in a net loss of £952. Choice of implant and theatre staffing were the largest cost drivers. Operating theatre delays of more than one hour resulted in a loss of income Our findings indicate that the national tariff does not accurately represent the cost of treatment for this condition. Effective use of the operating theatre and implant discounting are likely to be more effective cost containment approaches than control of bed-day costs. This cost analysis of fractures of the proximal humerus reinforces the limitations of the national tariff within the English National Health Service, and underlines the importance of effective use of the operating theatre, as well as appropriate implant procurement where controlling costs of treatment is concerned. ©2016 The British Editorial Society of Bone & Joint Surgery.

SEASAT economic assessment. Volume 10: The SATIL 2 program (a program for the evaluation of the costs of an operational SEASAT system as a function of operational requirements and reliability. [computer programs for economic analysis and systems analysis of SEASAT satellite systems

NASA Technical Reports Server (NTRS)

1975-01-01

The SATIL 2 computer program was developed to assist with the programmatic evaluation of alternative approaches to establishing and maintaining a specified mix of operational sensors on spacecraft in an operational SEASAT system. The program computes the probability distributions of events (i.e., number of launch attempts, number of spacecraft purchased, etc.), annual recurring cost, and present value of recurring cost. This is accomplished for the specific task of placing a desired mix of sensors in orbit in an optimal fashion in order to satisfy a specified sensor demand function. Flow charts are shown, and printouts of the programs are given.

Cost accounting, management control, and planning in health care.

PubMed

Siegrist, R B; Blish, C S

1988-02-01

Advantages and pharmacy applications of computerized hospital management-control and planning systems are described. Hospitals must define their product lines; patient cases, not tests or procedures, are the end product. Management involves operational control, management control, and strategic planning. Operational control deals with day-to-day management on the task level. Management control involves ensuring that managers use resources effectively and efficiently to accomplish the organization's objectives. Management control includes both control of unit costs of intermediate products, which are procedures and services used to treat patients and are managed by hospital department heads, and control of intermediate product use per case (managed by the clinician). Information from the operation and management levels feeds into the strategic plan; conversely, the management level controls the plan and the operational level carries it out. In the system developed at New England Medical Center, Boston, Massachusetts, the intermediate product-management system enables managers to identify intermediate products, develop standard costs, simulate changes in departmental costs, and perform variance analysis. The end-product management system creates a patient-level data-base, identifies end products (patient-care groupings), develops standard resource protocols, models alternative assumptions, performs variance analysis, and provides concurrent reporting. Examples are given of pharmacy managers' use of such systems to answer questions in the areas of product costing, product pricing, variance analysis, productivity monitoring, flexible budgeting, modeling and planning, and comparative analysis.(ABSTRACT TRUNCATED AT 250 WORDS)

Cost Analysis of Spinal Versus General Anesthesia for Lumbar Diskectomy and Laminectomy Spine Surgery.

PubMed

Agarwal, Prateek; Pierce, John; Welch, William C

2016-05-01

Lumbar spine surgery can be performed using various anesthetic modalities, most notably general or spinal anesthesia. Because data comparing the cost of these anesthetic modalities in spine surgery are scarce, this study asks whether spinal anesthesia is less costly than general anesthesia. A total of 542 patients who underwent elective lumbar diskectomy or laminectomy spine surgery between 2007 and 2011 were retrospectively identified, with 364 having received spinal anesthesia and 178 having received general anesthesia. Mean direct operating cost, indirect cost (general support staff, insurance, taxes, floor space, facility, and administrative costs), and total cost were compared among patients who received general and spinal anesthesia. Linear multiple regression analysis was used to identify the effect of anesthesia type on cost and determine the factors underlying this effect, while controlling for patient and procedure characteristics. When controlling for patient and procedure characteristics, use of spinal anesthesia was associated with a 41.1% lower direct operating cost (-$3629 ± $343, P < 0.001), 36.6% lower indirect cost (-$1603 ± $168, P < 0.001), and 39.6% lower total cost (-$5232 ± $482, P < 0.001) compared with general anesthesia. Shorter hospital stay, shorter duration of anesthesia, shorter duration of operation, and lower estimated blood loss contributed to lower costs for spinal anesthesia, but other factors beyond these were also responsible for lower direct operating and total costs. When comparing the benefits of spinal and general anesthesia, spinal anesthesia is less costly when used in patients undergoing lumbar diskectomy and laminectomy spine surgery. Copyright © 2016 Elsevier Inc. All rights reserved.

Geostationary platform systems concepts definition study. Volume 2: Technical, book 1

NASA Technical Reports Server (NTRS)

1980-01-01

The initial selection and definition of operational geostationary platform concepts is discussed. Candidate geostationary platform missions and payloads were identified from COMSAT, Aerospace, and NASA studies. These missions and payloads were cataloged; classified with to communications, military, or scientific uses; screened for application and compatibility with geostationary platforms; and analyzed to identify platform requirements. Two platform locations were then selected (Western Hemisphere - 110 deg W, and Atlantic - 15 deg W), and payloads allocated based on nominal and high traffic models. Trade studies were performed leading to recommendation of selected concepts. Of 30 Orbit Transfer Vehicle (0TV) configuration and operating mode options identified, 18 viable candidates compatible with the operational geostationary platform missions were selected for analysis. Each was considered using four platform operational modes - 8 or 16 year life, and serviced or nonserviced, providing a total of 72 OTV/platform-mode options. For final trade study concept selection, a cost program was developed considering payload and platform costs and weight; transportation unit and total costs for the shuttle and OTV; and operational costs such as assembly or construction time, mating time, and loiter time. Servicing costs were added for final analysis and recommended selection.

The ALMA CONOPS project: the impact of funding decisions on observatory performance

NASA Astrophysics Data System (ADS)

Ibsen, Jorge; Hibbard, John; Filippi, Giorgio

2014-08-01

In time when every penny counts, many organizations are facing the question of how much scientific impact a budget cut can have or, putting it in more general terms, which is the science impact of alternative (less costly) operational modes. In reply to such question posted by the governing bodies, the ALMA project had to develop a methodology (ALMA Concepts for Operations, CONOPS) that attempts to measure the impact that alternative operational scenarios may have on the overall scientific production of the Observatory. Although the analysis and the results are ALMA specific, the developed approach is rather general and provides a methodology for a cost-performance analysis of alternatives before any radical alterations to the operations model are adopted. This paper describes the key aspects of the methodology: a) the definition of the Figures of Merit (FoMs) for the assessment of quantitative science performance impacts as well as qualitative impacts, and presents a methodology using these FoMs to evaluate the cost and impact of the different operational scenarios; b) the definition of a REFERENCE operational baseline; c) the identification of Alternative Scenarios each replacing one or more concepts in the REFERENCE by a different concept that has a lower cost and some level of scientific and/or operational impact; d) the use of a Cost-Performance plane to graphically combine the effects that the alternative scenarios can have in terms of cost reduction and affected performance. Although is a firstorder assessment, we believe this approach is useful for comparing different operational models and to understand the cost performance impact of these choices. This can be used to take decision to meet budget cuts as well as in evaluating possible new emergent opportunities.

Development and application of a model for the analysis of trades between space launch system operations and acquisition costs

NASA Astrophysics Data System (ADS)

Nix, Michael B.

2005-12-01

Early design decisions in the development of space launch systems determine the costs to acquire and operate launch systems. Some sources indicate that as much as 90% of life cycle costs are fixed by the end of the critical design review phase. System characteristics determined by these early decisions are major factors in the acquisition cost of flight hardware elements and facilities and influence operations costs through the amount of maintenance and support labor required to sustain system function. Operations costs are also dependent on post-development management decisions regarding how much labor will be deployed to meet requirements of market demand and ownership profit. The ability to perform early trade-offs between these costs is vital to the development of systems that have the necessary capacity to provide service and are profitable to operate. An Excel-based prototype model was developed for making early analyses of trade-offs between the costs to operate a space launch system and to acquire the necessary assets to meet a given set of operational requirements. The model, integrating input from existing models and adding missing capability, allows the user to make such trade-offs across a range of operations concepts (required flight rates, staffing levels, shifts per workday, workdays per week and per year, unreliability, wearout and depot maintenance) and the number, type and capability of assets (flight hardware elements, processing and supporting facilities and infrastructure). The costs and capabilities of hypothetical launch systems can be modeled as a function of interrelated turnaround times and labor resource levels, and asset loss and retirement. The number of flight components and facilities required can be calculated and the operations and acquisition costs compared for a specified scenario. Findings, based on the analysis of a hypothetical two stage to orbit, reusable, unmanned launch system, indicate that the model is suitable for the trade-off analyses desired. The minimum turnaround time/maximum labor allocation for specific hardware configurations and characteristics and corresponding asset requirements can be estimated. Either turnaround time or resources can be varied and the resulting operations and acquisition costs can be compared. Asset reliability, wearout and depot maintenance intervals and durations can be varied as well to analyze the effects on costs. Likewise, the effects on operations and acquisitions costs of the introduction of alternative technologies that affect reliability, maintainability and supportability in various hardware configurations can be evaluated.

Nursing home cost and ownership type: evidence of interaction effects.

PubMed

Arling, G; Nordquist, R H; Capitman, J A

1987-06-01

Due to steadily increasing public expenditures for nursing home care, much research has focused on factors that influence nursing home costs, especially for Medicaid patients. Nursing home cost function studies have typically used a number of predictor variables in a multiple regression analysis to determine the effect of these variables on operating cost. Although several authors have suggested that nursing home ownership types have different goal orientations, not necessarily based on economic factors, little attention has been paid to this issue in empirical research. In this study, data from 150 Virginia nursing homes were used in multiple regression analysis to examine factors accounting for nursing home operating costs. The context of the study was the Virginia Medicaid reimbursement system, which has intermediate care and skilled nursing facility (ICF and SNF) facility-specific per diem rates, set according to facility cost histories. The analysis revealed interaction effects between ownership and other predictor variables (e.g., percentage Medicaid residents, case mix, and region), with predictor variables having different effects on cost depending on ownership type. Conclusions are drawn about the goal orientations and behavior of chain-operated, individual for-profit, and public and nonprofit facilities. The implications of these findings for long-term care reimbursement policies are discussed.

COST-RISK-BENEFIT ANALYSIS IN DIAGNOSTIC RADIOLOGY: A THEORETICAL AND ECONOMIC BASIS FOR RADIATION PROTECTION OF THE PATIENT.

PubMed

Moores, B Michael

2016-06-01

In 1973, International Commission on Radiological Protection Publication 22 recommended that the acceptability of radiation exposure levels for a given activity should be determined by a process of cost-benefit analysis. It was felt that this approach could be used to underpin both the principle of ALARA as well for justification purposes. The net benefit, B, of an operation involving irradiation was regarded as equal to the difference between its gross benefit, V, and the sum of three components; the basic production cost associated with the operation, P; the cost of achieving the selected level of protection, X; and the cost Y of the detriment involved in the operation: [Formula: see text] This article presents a theoretical cost-risk-benefit analysis that is applicable to the diagnostic accuracy (Levels 1 and 2) of the hierarchical efficacy model presented by National Council on Radiation Protection and Measurements in 1992. This enables the costs of an examination to be related to the sensitivity and specificity of an X-ray examination within a defined clinical problem setting and introduces both false-positive/false-negative diagnostic outcomes into the patient radiation protection framework. © The Author 2015. Published by Oxford University Press.

Nursing home cost and ownership type: evidence of interaction effects.

PubMed Central

Arling, G; Nordquist, R H; Capitman, J A

1987-01-01

Due to steadily increasing public expenditures for nursing home care, much research has focused on factors that influence nursing home costs, especially for Medicaid patients. Nursing home cost function studies have typically used a number of predictor variables in a multiple regression analysis to determine the effect of these variables on operating cost. Although several authors have suggested that nursing home ownership types have different goal orientations, not necessarily based on economic factors, little attention has been paid to this issue in empirical research. In this study, data from 150 Virginia nursing homes were used in multiple regression analysis to examine factors accounting for nursing home operating costs. The context of the study was the Virginia Medicaid reimbursement system, which has intermediate care and skilled nursing facility (ICF and SNF) facility-specific per diem rates, set according to facility cost histories. The analysis revealed interaction effects between ownership and other predictor variables (e.g., percentage Medicaid residents, case mix, and region), with predictor variables having different effects on cost depending on ownership type. Conclusions are drawn about the goal orientations and behavior of chain-operated, individual for-profit, and public and nonprofit facilities. The implications of these findings for long-term care reimbursement policies are discussed. PMID:3301746

Integrated operations payloads/fleet analysis study extension report

NASA Technical Reports Server (NTRS)

1971-01-01

An analysis of the factors affecting the cost effectiveness of space shuttle operations is presented. The subjects discussed are: (1)payload data bank, (2) program risk analysis, (3)navigation satellite program, and (4) reusable launch systems.

BMP COST ANALYSIS FOR SOURCE WATER PROTECTION

EPA Science Inventory

Cost equations are developed to estimate capital, and operations and maintenance (O&M) costs for commonly used best management practices (BMPs). Total BMP volume and/or surface area is used to predict these costs. Engineering News Record (ENR) construction cost index was used t...

Technoeconomic analysis of large scale production of pre-emergent Pseudomonas fluorescens microbial bioherbicide in Canada.

PubMed

Mupondwa, Edmund; Li, Xue; Boyetchko, Susan; Hynes, Russell; Geissler, Jon

2015-01-01

The study presents an ex ante technoeconomic analysis of commercial production of Pseudomonas fluorescens BRG100 bioherbicide in Canada. An engineering economic model is designed in SuperPro Designer® to investigate capital investment scaling and profitability. Total capital investment for a stand-alone BRG100 fermentation plant at baseline capacity (two 33,000L fermenters; 3602tonnesannum(-1)) is $17.55million. Total annual operating cost is $14.76million. Raw materials account for 50% of operating cost. The fermentation plant is profitable over wide operating scale, evaluated over a range of BRG100 prices and costs of capital. Smaller plants require higher NPV breakeven prices. However, larger plants are more sensitive to changes in the cost of capital. Unit production costs decrease as plant capacity increases, indicating scale economies. A plant operating for less than one year approaches positive NPV for periods as low as 2months. These findings can support bioherbicide R&D investment and commercialization strategies. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

Hysteroscopic polypectomy prior to infertility treatment: A cost analysis and systematic review.

PubMed

Mouhayar, Youssef; Yin, Ophelia; Mumford, Sunni L; Segars, James H

2017-06-01

The cost of fertility treatment is expensive and interventions that reduce cost can lead to greater efficiency and fewer embryos transferred. Endometrial polyps contribute to infertility and are frequently removed prior to infertility treatment. It is unclear whether polypectomy reduces fertility treatment cost and if so, the magnitude of cost reduction afforded by the procedure. The aim of this study was to determine whether performing office or operative hysteroscopic polypectomy prior to infertility treatment would be cost-effective. PubMed, Embase, and Cochrane libraries were used to identify publications reporting pregnancy rates after hysteroscopic polypectomy. Studies were required to have a polypectomy treatment group and control group of patients with polyps that were not resected. The charges of infertility treatments and polypectomy were obtained through infertility organizations and a private healthcare cost reporting website. These charges were applied to a decision tree model over the range of pregnancy rates observed in the representative studies to calculate an average cost per clinical or ongoing pregnancy. A sensitivity analysis was conducted to assess cost savings of polypectomy over a range of pregnancy rates and polypectomy costs. Pre-treatment office or operative hysteroscopic polypectomy ultimately saved €6658 ($7480) and €728 ($818), respectively, of the average cost per clinical pregnancy in women treated with four cycles of intrauterine insemination. Polypectomy prior to intrauterine insemination was cost-effective for clinical pregnancy rates greater than 30.2% for office polypectomy and 52.6% for operative polypectomy and for polypectomy price <€4414 ($4959). Office polypectomy or operative polypectomy saved €15,854 ($17,813) and €6644 ($7465), respectively, from the average cost per ongoing pregnancy for in vitro fertilization/intracytoplasmic sperm injection treated women and was cost-effective for ongoing pregnancy rates greater than 26.4% (office polypectomy) and 31.7% (operative polypectomy) and polypectomy price <€6376 ($7164). These findings suggested that office or operative hysteroscopic polypectomy was cost-effective when performed prior to both intrauterine insemination and in vitro fertilization over a range of plausible pregnancy rates and procedural costs. Copyright © 2017 Elsevier B.V. All rights reserved.

Determining the Cost-Savings Threshold and Alignment Accuracy of Patient-Specific Instrumentation in Total Ankle Replacements.

PubMed

Hamid, Kamran S; Matson, Andrew P; Nwachukwu, Benedict U; Scott, Daniel J; Mather, Richard C; DeOrio, James K

2017-01-01

Traditional intraoperative referencing for total ankle replacements (TARs) involves multiple steps and fluoroscopic guidance to determine mechanical alignment. Recent adoption of patient-specific instrumentation (PSI) allows for referencing to be determined preoperatively, resulting in less steps and potentially decreased operative time. We hypothesized that usage of PSI would result in decreased operating room time that would offset the additional cost of PSI compared with standard referencing (SR). In addition, we aimed to compare postoperative radiographic alignment between PSI and SR. Between August 2014 and September 2015, 87 patients undergoing TAR were enrolled in a prospectively collected TAR database. Patients were divided into cohorts based on PSI vs SR, and operative times were reviewed. Radiographic alignment parameters were retrospectively measured at 6 weeks postoperatively. Time-driven activity-based costing (TDABC) was used to derive direct costs. Cost vs operative time-savings were examined via 2-way sensitivity analysis to determine cost-saving thresholds for PSI applicable to a range of institution types. Cost-saving thresholds defined the price of PSI below which PSI would be cost-saving. A total of 35 PSI and 52 SR cases were evaluated with no significant differences identified in patient characteristics. Operative time from incision to completion of casting in cases without adjunct procedures was 127 minutes with PSI and 161 minutes with SR ( P < .05). PSI demonstrated similar postoperative accuracy to SR in coronal tibial-plafond alignment (1.1 vs 0.3 degrees varus, P = .06), tibial-plafond alignment (0.3 ± 2.1 vs 1.1 ± 2.1 degrees varus, P = .06), and tibial component sagittal alignment (0.7 vs 0.9 degrees plantarflexion, P = .14). The TDABC method estimated a PSI cost-savings threshold range at our institution of $863 below which PSI pricing would provide net cost-savings. Two-way sensitivity analysis generated a globally applicable cost-savings threshold model based on institution-specific costs and surgeon-specific time-savings. This study demonstrated equivalent postoperative TAR alignment with PSI and SR referencing systems but with a significant decrease in operative time with PSI. Based on TDABC and associated sensitivity analysis, a cost-savings threshold of $863 was identified for PSI pricing at our institution below which PSI was less costly than SR. Similar internal cost accounting may benefit health care systems for identifying cost drivers and obtaining leverage during price negotiations. Level III, therapeutic study.

Clinical process cost analysis.

PubMed

Marrin, C A; Johnson, L C; Beggs, V L; Batalden, P B

1997-09-01

New systems of reimbursement are exerting enormous pressure on clinicians and hospitals to reduce costs. Using cheaper supplies or reducing the length of stay may be a satisfactory short-term solution, but the best strategy for long-term success is radical reduction of costs by reengineering the processes of care. However, few clinicians or institutions know the actual costs of medical care; nor do they understand, in detail, the activities involved in the delivery of care. Finally, there is no accepted method for linking the two. Clinical process cost analysis begins with the construction of a detailed flow diagram incorporating each activity in the process of care. The cost of each activity is then calculated, and the two are linked. This technique was applied to Diagnosis Related Group 75 to analyze the real costs of the operative treatment of lung cancer at one institution. Total costs varied between $6,400 and $7,700. The major driver of costs was personnel time, which accounted for 55% of the total. Forty percent of the total cost was incurred in the operating room. The cost of care decreased progressively during hospitalization. Clinical process cost analysis provides detailed information about the costs and processes of care. The insights thus obtained may be used to reduce costs by reengineering the process.

Comparison of minimally invasive parathyroidectomy under local anaesthesia and minimally invasive video-assisted parathyroidectomy for primary hyperparathyroidism: a cost analysis.

PubMed

Melfa, G I; Raspanti, C; Attard, M; Cocorullo, G; Attard, A; Mazzola, S; Salamone, G; Gulotta, G; Scerrino, G

2016-01-01

Primary hyperparathyroidism (PHPT) origins from a solitary adenoma in 70- 95% of cases. Moreover, the advances in methods for localizing an abnormal parathyroid gland made minimally invasive techniques more prominent. This study presents a micro-cost analysis of two parathyroidectomy techniques. 72 consecutive patients who underwent minimally invasive parathyroidectomy, video-assisted (MIVAP, group A, 52 patients) or "open" under local anaesthesia (OMIP, group B, 20 patients) for PHPT were reviewed. Operating room, consumable, anaesthesia, maintenance costs, equipment depreciation and surgeons/anaesthesiologists fees were evaluated. The patient's satisfaction and the rate of conversion to conventional parathyroidectomy were investigated. T-Student's, Kolmogorov-Smirnov tests and Odds Ratio were used for statistical analysis. 1 patient of the group A and 2 of the group B were excluded from the cost analysis because of the conversion to the conventional technique. Concerning the remnant patients, the overall average costs were: for Operative Room, 1186,69 € for the MIVAP group (51 patients) and 836,11 € for the OMIP group (p<0,001); for the Team, 122,93 € (group A) and 90,02 € (group B) (p<0,001); the other operative costs were 1388,32 € (group A) and 928,23 € (group B) (p<0,001). The patient's satisfaction was very strongly in favour of the group B (Odds Ratio 20,5 with a 95% confidence interval). MIVAP is more expensive compared to the "open" parathyroidectomy under local anaesthesia due to the costs of general anaesthesia and the longer operative time. Moreover, the patients generally prefer the local anaesthesia. Nevertheless, the rate of conversion to the conventional parathyroidectomy was relevant in the group of the local anaesthesia compared to the MIVAP, since the latter allows a four-gland exploration.

Cost analysis in the toxicology laboratory.

PubMed

Travers, E M

1990-09-01

The process of determining laboratory sectional and departmental costs and test costs for instrument-generated and manually generated reportable results for toxicology laboratories has been outlined in this article. It is hoped that the basic principles outlined in the preceding text will clarify and elucidate one of the most important areas needed for laboratory fiscal integrity and its survival in these difficult times for health care providers. The following general principles derived from this article are helpful aids for managers of toxicology laboratories. 1. To manage a cost-effective, efficient toxicology laboratory, several factors must be considered: the laboratory's instrument configuration, test turnaround time needs, the test menu offered, the analytic methods used, the cost of labor based on time expended and the experience and educational level of the staff, and logistics that determine specimen delivery time and costs. 2. There is a wide variation in costs for toxicologic methods, which requires that an analysis of capital (equipment) purchase and operational (test performance) costs be performed to avoid waste, purchase wisely, and determine which tests consume the majority of the laboratory's resources. 3. Toxicologic analysis is composed of many complex steps. Each step must be individually cost-accounted. Screening test results must be confirmed, and the cost for both steps must be included in the cost per reportable result. 4. Total costs will vary in the same laboratory and between laboratories based on differences in salaries paid to technical staff, differences in reagent/supply costs, the number of technical staff needed to operate the analyzer or perform the method, and the inefficient use of highly paid staff to operate the analyzer or perform the method. 5. Since direct test costs vary directly with the type and number of analyzers or methods and are dependent on the operational mode designed by the manufacturer, laboratory managers should construct an actual test-cost data base for instrument or method in use to accurately compare costs using the "bottom-up" approach. 6. Laboratory expenses can be examined from three perspectives: total laboratory, laboratory section, and subsection workstation. The objective is to track all laboratory expenses through each of these levels. 7. In the final analysis, a portion of total laboratory expenses must be allocated to each unit of laboratory output--the billable procedure or, in laboratories where tests are not billed, the tests produced.(ABSTRACT TRUNCATED AT 400 WORDS)

BMP COST ANALYSIS FOR SOURCE WATER PROTECTION

EPA Science Inventory

Cost equations are developed to estimate capital and operations and maintenance (O&M) for commonly used best management practices (BMPS). Total BMP volume and/or surface area is used to predict these costs. ENR construction cost index was used to adjust cost data to December 2000...

Operations planning and analysis handbook for NASA/MSFC phase B development projects

NASA Technical Reports Server (NTRS)

Batson, Robert C.

1986-01-01

Current operations planning and analysis practices on NASA/MSFC Phase B projects were investigated with the objectives of (1) formalizing these practices into a handbook and (2) suggesting improvements. The study focused on how Science and Engineering (S&E) Operational Personnel support Program Development (PD) Task Teams. The intimate relationship between systems engineering and operations analysis was examined. Methods identified for use by operations analysts during Phase B include functional analysis, interface analysis methods to calculate/allocate such criteria as reliability, Maintainability, and operations and support cost.

The cost-effectiveness of nonoperative management versus laparoscopic appendectomy for the treatment of acute, uncomplicated appendicitis in children.

PubMed

Wu, James X; Sacks, Greg D; Dawes, Aaron J; DeUgarte, Daniel; Lee, Steven L

2017-07-01

Several studies have demonstrated the safety and short-term success of nonoperative management in children with acute, uncomplicated appendicitis. Nonoperative management spares the patients and their family the upfront cost and discomfort of surgery, but also risks recurrent appendicitis. Using decision-tree software, we evaluated the cost-effectiveness of nonoperative management versus routine laparoscopic appendectomy. Model variables were abstracted from a review of the literature, Healthcare Cost and Utilization Project, and Medicare Physician Fee schedule. Model uncertainty was assessed using both one-way and probabilistic sensitivity analyses. We used a $100,000 per quality adjusted life year (QALY) threshold for cost-effectiveness. Operative management cost $11,119 and yielded 23.56 quality-adjusted life months (QALMs). Nonoperative management cost $2277 less than operative management, but yielded 0.03 fewer QALMs. The incremental cost-to-effectiveness ratio of routine laparoscopic appendectomy was $910,800 per QALY gained. This greatly exceeds the $100,000/QALY threshold and was not cost-effective. One-way sensitivity analysis found that operative management would become cost-effective if the 1-year recurrence rate of acute appendicitis exceeded 39.8%. Probabilistic sensitivity analysis indicated that nonoperative management was cost-effective in 92% of simulations. Based on our model, nonoperative management is more cost-effective than routine laparoscopic appendectomy for children with acute, uncomplicated appendicitis. Cost-Effectiveness Study: Level II. Published by Elsevier Inc.

Cost analysis of objective resident cataract surgery assessments.

PubMed

Nandigam, Kiran; Soh, Jonathan; Gensheimer, William G; Ghazi, Ahmed; Khalifa, Yousuf M

2015-05-01

To compare 8 ophthalmology resident surgical training tools to determine which is most cost effective. University of Rochester Medical Center, Rochester, New York, USA. Retrospective evaluation of technology. A cost-analysis model was created to compile all relevant costs in running each tool in a medium-sized ophthalmology program. Quantitative cost estimates were obtained based on cost of tools, cost of time in evaluations, and supply and maintenance costs. For wet laboratory simulation, Eyesi was the least expensive cataract surgery simulation method; however, it is only capable of evaluating simulated cataract surgery rehearsal and requires supplementation with other evaluative methods for operating room performance and for noncataract wet lab training and evaluation. The most expensive training tool was the Eye Surgical Skills Assessment Test (ESSAT). The 2 most affordable methods for resident evaluation in operating room performance were the Objective Assessment of Skills in Intraocular Surgery (OASIS) and Global Rating Assessment of Skills in Intraocular Surgery (GRASIS). Cost-based analysis of ophthalmology resident surgical training tools are needed so residency programs can implement tools that are valid, reliable, objective, and cost effective. There is no perfect training system at this time. Copyright © 2015 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Development Risk Methodology for Whole Systems Trade Analysis

DTIC Science & Technology

2016-08-01

Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202- 4302. Respondents should be aware that notwithstanding...JCIDS - Joint Capabilities Integration and Development System L - Likelihood MS - Milestone O&S - Operations and Sustainment P.95 - 95th...and their consequences. These dimensions are: performance, unit cost, operations & sustainment (O&S) cost, development risk, and growth potential

Framework for Financial Ratio Analysis of Audited Federal Financial Reports

DTIC Science & Technology

1999-12-01

franchising operations, allowing them to lower costs and share administrative support services with other agencies. [Ref. 60:sec. 402-403] The GMRA also...96 Federal Financial Reporting Statement of Net Cost Report Format 97 Federal Financial Reporting Statement of Changes in Net Position Report Format...analysis for sales, profitability, efficiency, marketing, investment, debt and capital analysis. Monitor growth Monitor costs Measure profitability and

FINANCIAL ANALYSIS OF CURRENT OPERATIONS OF COLLEGES AND UNIVERSITIES.

ERIC Educational Resources Information Center

SWANSON, JOHN E.; AND OTHERS

TECHNIQUES FOR DEVELOPING FINANCIAL AND RELATED COST-EFFECTIVENESS DATA FOR PUBLIC AND PRIVATELY SUPPORTED AMERICAN COLLEGES AND UNIVERSITIES WERE STUDIED TO FORMULATE PRINCIPLES, PROCEDURES, AND STANDARDS FOR THE ACCUMULATION AND ANALYSES OF CURRENT OPERATING COSTS. AFTER SEPARATE ANALYSES OF INSTITUTIONAL PROCEDURES AND REPORTS, ANALYTIC UNITS…

Renewable Electricity Futures. Operational Analysis of the Western Interconnection at Very High Renewable Penetrations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brinkman, Gregory

2015-09-01

The Renewable Electricity Futures Study (RE Futures)--an analysis of the costs and grid impacts of integrating large amounts of renewable electricity generation into the U.S. power system--examined renewable energy resources, technical issues regarding the integration of these resources into the grid, and the costs associated with high renewable penetration scenarios. These scenarios included up to 90% of annual generation from renewable sources, although most of the analysis was focused on 80% penetration scenarios. Hourly production cost modeling was performed to understand the operational impacts of high penetrations. One of the conclusions of RE Futures was that further work was necessarymore » to understand whether the operation of the system was possible at sub-hourly time scales and during transient events. This study aimed to address part of this by modeling the operation of the power system at sub-hourly time scales using newer methodologies and updated data sets for transmission and generation infrastructure. The goal of this work was to perform a detailed, sub-hourly analysis of very high penetration scenarios for a single interconnection (the Western Interconnection). It focused on operational impacts, and it helps verify that the operational results from the capacity expansion models are useful. The primary conclusion of this study is that sub-hourly operation of the grid is possible with renewable generation levels between 80% and 90%.« less

Process analysis and economics of drinking water production from coastal aquifers containing chromophoric dissolved organic matter and bromide using nanofiltration and ozonation.

PubMed

Sobhani, R; McVicker, R; Spangenberg, C; Rosso, D

2012-01-01

In regions characterized by water scarcity, such as coastal Southern California, groundwater containing chromophoric dissolved organic matter is a viable source of water supply. In the coastal aquifer of Orange County in California, seawater intrusion driven by coastal groundwater pumping increased the concentration of bromide in extracted groundwater from 0.4 mg l⁻¹ in 2000 to over 0.8 mg l⁻¹ in 2004. Bromide, a precursor to bromate formation is regulated by USEPA and the California Department of Health as a potential carcinogen and therefore must be reduced to a level below 10 μg l⁻¹. This paper compares two processes for treatment of highly coloured groundwater: nanofiltration and ozone injection coupled with biologically activated carbon. The requirement for bromate removal decreased the water production in the ozonation process to compensate for increased maintenance requirements, and required the adoption of catalytic carbon with associated increase in capital and operating costs per unit volume. However, due to the absence of oxidant addition in nanofiltration processes, this process is not affected by bromide. We performed a process analysis and a comparative economic analysis of capital and operating costs for both technologies. Our results show that for the case studied in coastal Southern California, nanofiltration has higher throughput and lower specific capital and operating cost, when compared to ozone injection with biologically activate carbon. Ozone injection with biologically activated carbon, compared to nanofiltration, has 14% higher capital cost and 12% higher operating costs per unit water produced while operating at the initial throughput. Due to reduced ozone concentration required to accommodate for bromate reduction, the ozonation process throughput is reduced and the actual cost increase (per unit water produced) is 68% higher for capital cost and 30% higher for operations. Copyright © 2011 Elsevier Ltd. All rights reserved.

Preliminary engineering analysis for clothes washers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biermayer, Peter J.

1996-10-01

The Engineering Analysis provides information on efficiencies, manufacturer costs, and other characteristics of the appliance class being analyzed. For clothes washers, there are two classes: standard and compact. Since data were not available to analyze the compact class, only clothes washers were analyzed in this report. For this analysis, individual design options were combined and ordered in a manner that resulted in the lowest cumulative cost/savings ratio. The cost/savings ratio is the increase in manufacturer cost for a design option divided by the reduction in operating costs due to fuel and water savings.

Cost-Effectiveness of a Biodegradable Compared to a Titanium Fixation System in Maxillofacial Surgery: A Multicenter Randomized Controlled Trial

PubMed Central

van Bakelen, N. B.; Vermeulen, K. M.; Buijs, G. J.; Jansma, J.; de Visscher, J. G. A. M.; Hoppenreijs, Th. J. M.; Bergsma, J. E.; Stegenga, B.; Bos, R. R. M.

2015-01-01

Background Biodegradable fixation systems could reduce/delete the problems associated with titanium plate removal. This means less surgical discomfort, and a reduction in costs. Aim The aim of the present study was to compare the cost-effectiveness between a biodegradable and a titanium system in Maxillofacial surgery. Materials and Methods This multicenter RCT was performed in the Netherlands from December 2006 to July 2009. Included were 230 patients who underwent a bilateral sagittal split osteotomy (BSSO), a Le Fort-I osteotomy, or a bi-maxillary osteotomy and those treated for fractures of the mandible, maxilla, or zygoma. The patients were randomly assigned to a titanium group (KLS Martin) or to a biodegradable group (Inion CPS). Costs were assessed from a societal perspective. Health outcomes in the incremental cost-effectiveness ratio (ICER) were bone healing (8 weeks) and plate removal (2 years). Results In 25 out of the 117 patients who were randomized to the biodegradable group, the maxillofacial surgeon made the decision to switch to the titanium system intra-operatively. This resulted in an Intention-To-Treat (ITT-)analysis and a Treatment-Received (TR-) analysis. Both analyses indicated that operations performed with titanium plates and screws had better health outcomes. In the TR-analysis the costs were lower in the biodegradable group, in the ITT-analysis costs were lower in the titanium group. Conclusion and Discussion The difference in costs between the ITT and the TR analyses can be explained by the intra-operative switches: In the TR-analysis the switches were analysed in the titanium group. In the ITT-analysis they were analysed in the biodegradable group. Considering the cost-effectiveness the titanium system is preferable to the biodegradable system in the regular treatment spectrum of mandibular, Le Fort-I, and zygomatic fractures, and BSSO’s, Le Fort-I osteotomies and bimaxillary osteotomies. Trial Registration Controlled-Trials.com ISRCTN 44212338 PMID:26192813

Operating Dedicated Data Centers - Is It Cost-Effective?

NASA Astrophysics Data System (ADS)

Ernst, M.; Hogue, R.; Hollowell, C.; Strecker-Kellog, W.; Wong, A.; Zaytsev, A.

2014-06-01

The advent of cloud computing centres such as Amazon's EC2 and Google's Computing Engine has elicited comparisons with dedicated computing clusters. Discussions on appropriate usage of cloud resources (both academic and commercial) and costs have ensued. This presentation discusses a detailed analysis of the costs of operating and maintaining the RACF (RHIC and ATLAS Computing Facility) compute cluster at Brookhaven National Lab and compares them with the cost of cloud computing resources under various usage scenarios. An extrapolation of likely future cost effectiveness of dedicated computing resources is also presented.

Adoption of robotics in a general surgery residency program: at what cost?

PubMed

Mehaffey, J Hunter; Michaels, Alex D; Mullen, Matthew G; Yount, Kenan W; Meneveau, Max O; Smith, Philip W; Friel, Charles M; Schirmer, Bruce D

2017-06-01

Robotic technology is increasingly being utilized by general surgeons. However, the impact of introducing robotics to surgical residency has not been examined. This study aims to assess the financial costs and training impact of introducing robotics at an academic general surgery residency program. All patients who underwent laparoscopic or robotic cholecystectomy, ventral hernia repair (VHR), and inguinal hernia repair (IHR) at our institution from 2011-2015 were identified. The effect of robotic surgery on laparoscopic case volume was assessed with linear regression analysis. Resident participation, operative time, hospital costs, and patient charges were also evaluated. We identified 2260 laparoscopic and 139 robotic operations. As the volume of robotic cases increased, the number of laparoscopic cases steadily decreased. Residents participated in all laparoscopic cases and 70% of robotic cases but operated from the robot console in only 21% of cases. Mean operative time was increased for robotic cholecystectomy (+22%), IHR (+55%), and VHR (+61%). Financial analysis revealed higher median hospital costs per case for robotic cholecystectomy (+$411), IHR (+$887), and VHR (+$1124) as well as substantial associated fixed costs. Introduction of robotic surgery had considerable negative impact on laparoscopic case volume and significantly decreased resident participation. Increased operative time and hospital costs are substantial. An institution must be cognizant of these effects when considering implementing robotics in departments with a general surgery residency program. Copyright © 2017 Elsevier Inc. All rights reserved.

The ASAC Flight Segment and Network Cost Models

NASA Technical Reports Server (NTRS)

Kaplan, Bruce J.; Lee, David A.; Retina, Nusrat; Wingrove, Earl R., III; Malone, Brett; Hall, Stephen G.; Houser, Scott A.

1997-01-01

To assist NASA in identifying research art, with the greatest potential for improving the air transportation system, two models were developed as part of its Aviation System Analysis Capability (ASAC). The ASAC Flight Segment Cost Model (FSCM) is used to predict aircraft trajectories, resource consumption, and variable operating costs for one or more flight segments. The Network Cost Model can either summarize the costs for a network of flight segments processed by the FSCM or can be used to independently estimate the variable operating costs of flying a fleet of equipment given the number of departures and average flight stage lengths.

A Prospective Comparison of Robotic and Laparoscopic Pyeloplasty

PubMed Central

Link, Richard E.; Bhayani, Sam B.; Kavoussi, Louis R.

2006-01-01

Objective: To determine whether robotic-assisted pyeloplasty (RLP) has any significant clinical or cost advantages over laparoscopic pyeloplasty (LP) for surgeons already facile with intracorporeal suturing. Summary Background Data: LP has become an established management approach for primary ureteropelvic junction obstruction. More recently, the da Vinci robot has been applied to this procedure (RLP) in an attempt to shorten the learning curve. Whether RLP provides any significant advantage over LP for the experienced laparoscopist remains unclear. Methods: Ten consecutive cases each of transperitoneal RLP and LP performed by a single surgeon were compared prospectively with respect to surgical times and perioperative outcomes. Cost assessment was performed by sensitivity analysis using a mathematical cost model incorporating operative time, anesthesia fees, consumables, and capital equipment depreciation. Results: The RLP and LP groups had statistically indistinguishable demographics, pathology, and similar perioperative outcomes. Mean operative and total room time for RLP was significantly longer than LP by 19.5 and 39.0 minutes, respectively. RLP was much more costly than LP (2.7 times), due to longer operative time, increased consumables costs, and depreciation of the costly da Vinci system. However, even if depreciation was eliminated, RLP was still 1.7 times as costly as LP. One-way sensitivity analysis showed that LP operative time must increase to almost 6.5 hours for it to become cost equivalent to RLP. Conclusions: For the experienced laparoscopist, application of the da Vinci robot resulted in no significant clinical advantage and added substantial cost to transperitoneal laparoscopic dismembered pyeloplasty. PMID:16552199

A prospective comparison of robotic and laparoscopic pyeloplasty.

PubMed

Link, Richard E; Bhayani, Sam B; Kavoussi, Louis R

2006-04-01

To determine whether robotic-assisted pyeloplasty (RLP) has any significant clinical or cost advantages over laparoscopic pyeloplasty (LP) for surgeons already facile with intracorporeal suturing. LP has become an established management approach for primary ureteropelvic junction obstruction. More recently, the da Vinci robot has been applied to this procedure (RLP) in an attempt to shorten the learning curve. Whether RLP provides any significant advantage over LP for the experienced laparoscopist remains unclear. Ten consecutive cases each of transperitoneal RLP and LP performed by a single surgeon were compared prospectively with respect to surgical times and perioperative outcomes. Cost assessment was performed by sensitivity analysis using a mathematical cost model incorporating operative time, anesthesia fees, consumables, and capital equipment depreciation. The RLP and LP groups had statistically indistinguishable demographics, pathology, and similar perioperative outcomes. Mean operative and total room time for RLP was significantly longer than LP by 19.5 and 39.0 minutes, respectively. RLP was much more costly than LP (2.7 times), due to longer operative time, increased consumables costs, and depreciation of the costly da Vinci system. However, even if depreciation was eliminated, RLP was still 1.7 times as costly as LP. One-way sensitivity analysis showed that LP operative time must increase to almost 6.5 hours for it to become cost equivalent to RLP. For the experienced laparoscopist, application of the da Vinci robot resulted in no significant clinical advantage and added substantial cost to transperitoneal laparoscopic dismembered pyeloplasty.

Applied Virtual Reality in Reusable Launch Vehicle Design, Operations Development, and Training

NASA Technical Reports Server (NTRS)

Hale, Joseph P.

1997-01-01

Application of Virtual Reality (VR) technology offers much promise to enhance and accelerate the development of Reusable Launch Vehicle (RLV) infrastructure and operations while simultaneously reducing developmental and operational costs. One of the primary cost areas in the RLV concept that is receiving special attention is maintenance and refurbishment operations. To produce and operate a cost effective RLV, turnaround cost must be minimized. Designing for maintainability is a necessary requirement in developing RLVs. VR can provide cost effective methods to design and evaluate components and systems for maintenance and refurbishment operations. The National Aeronautics and Space Administration (NASA)/Marshall Space Flight Center (MSFC) is beginning to utilize VR for design, operations development, and design analysis for RLVs. A VR applications program has been under development at NASA/MSFC since 1989. The objectives of the MSFC VR Applications Program are to develop, assess, validate, and utilize VR in hardware development, operations development and support, mission operations training and science training. The NASA/MSFC VR capability has also been utilized in several applications. These include: 1) the assessment of the design of the late Space Station Freedom Payload Control Area (PCA), the control room from which onboard payload operations are managed; 2) a viewing analysis of the Tethered Satellite System's (TSS) "end-of-reel" tether marking options; 3) development of a virtual mockup of the International Space Welding Experiment for science viewing analyses from the Shuttle Remote Manipulator System elbow camera and as a trainer for ground controllers; and 4) teleoperations using VR. This presentation will give a general overview of the MSFC VR Applications Program and describe the use of VR in design analyses, operations development, and training for RLVs.

Specialty hospitals emulating focused factories: a case study.

PubMed

Kumar, Sameer

2010-01-01

For 15 years general hospital managers faced new competition from for-profit specialty hospitals that operate on a "focused factory" model, which threaten to siphon-off the most profitable patients. This paper aims to discuss North American specialty hospitals and to review rising costs impact on general hospital operations. The focus is to discover whether specialty hospitals are more efficient than general hospitals; if so, how significant is the difference and also what can general hospitals do in light of the rising specialty hospitals. The case study involves stochastic frontier regression analysis using Cobb-Douglas and Translog cost functions to compare Minnesota general and specialty hospital efficiency. Analysis is based on data from 117 general and 19 specialty hospitals. The results suggest that specialty hospitals are significantly more efficient than general hospitals. Overall, general hospitals were found to be more than twice as inefficient compared with specialty hospitals in the sample. Some cost-cutting factors highlighted can be implemented to trim rising costs. The case study highlights some managerial levers that general hospital operational managers might use to control rising costs. This also helps them compete with specialty hospitals by reducing overheads and other major costs. The study is based on empirical modeling for an important healthcare operational challenge and provides additional in-depth information that has health policy implications. The analysis and findings enable healthcare managers to guide their institutions in a new direction during a time of change within the industry.

Characteristics of future air cargo demand and impact on aircraft development - A report on the Cargo/Logistic Airlift Systems Study /CLASS/ project

NASA Technical Reports Server (NTRS)

Whitehead, A. H., Jr.

1978-01-01

The considered study has been conducted to evaluate the future potential for an advanced air cargo transport. A current operations analysis is discussed, taking into account the traffic structure, modal cost comparisons, terminal operations, containerization, and institutional factors. Attention is also given to case studies, a demand forecast, and an advanced air cargo systems analysis. The effects of potential improvements on reducing costs are shown. Improvement to the current infrastructure can occur from 1978 to 1985 with off-the-shelf technology, which when combined with higher load factors for aircraft and containers, can provide up to a 16 percent reduction in total operating costs and a 15 percent rate reduction. The results of the analysis indicate that the proposed changes in the infrastructure and improved cargo loading efficiencies are as important to improving the airlines' financial posture as is the anticipated large dedicated cargo aircraft.

Comparative cost-benefit analysis of tele-homecare for community-dwelling elderly in Japan: Non-Government versus Government Supported Funding Models.

PubMed

Akiyama, Miki; Abraham, Chon

2017-08-01

Tele-homecare is gaining prominence as a viable care alternative, as evidenced by the increase in financial support from international governments to fund initiatives in their respective countries. The primary reason for the funding is to support efforts to reduce lags and increase capacity in access to care as well as to promote preventive measures that can avert costly emergent issues from arising. These efforts are especially important to super-aged and aging societies such as in Japan, many European countries, and the United States (US). However, to date and to our knowledge, a direct comparison of non-government vs. government-supported funding models for tele-homecare is particularly lacking in Japan. The aim of this study is to compare these operational models (i.e., non-government vs. government-supported funding) from a cost-benefit perspective. This simulation study applies to a Japanese hypothetical cohort with implications for other super-aged and aging societies abroad. We performed a cost-benefit analysis (CBA) on two operational models for enabling tele-homecare for elderly community-dwelling cohorts based on a decision tree model, which we created with parameters from published literature. The two models examined are (a) Model 1-non-government-supported funding that includes monthly fixed charges paid by users for a portion of the operating costs, and (b) Model 2-government-supported funding that includes startup and installation costs only (i.e., no operating costs) and no monthly user charges. We performed base case cost-benefit analysis and probabilistic cost-benefit analysis with a Monte Carlo simulation. We calculated net benefit and benefit-to-cost ratios (BCRs) from the societal perspective with a five-year time horizon applying a 3% discount rate for both cost and benefit values. The cost of tele-homecare included (a) the startup system expense, averaged over a five-year depreciation period, and (b) operation expenses (i.e., labor and non-labor) per user per year. The benefit of tele-homecare was measured by annual willingness to pay (WTP) for tele-homecare by a user and medical expenditures avoided. Both costs and benefits were inflated using the relevant Japanese consumer price index (CPI) and converted into 2015 US dollars with purchasing power parity (PPP) adjusted. Base case net benefits of Model 1 and Model 2 were $417.00 and $97.30, respectively. Base case BCR of Model 1 tele-homecare was 1.63, while Model 2 was 1.03. The probabilistic analysis estimated mean (95%CI) for BCRs of Model 1 and Model 2 was 1.84 (1.89, 1.88) and 1.46 (1.43, 1.49), respectively. Sensitivity analysis showed robustness of Model 1 in 7 parameters but Model 2 was sensitive in all key parameters such as initial system cost, device cost, number of users, and medical expenditure saved. Break-even analysis showed that the system cost of Model 2 had to be under $187,500. Our results for each model collectively showed that tele-homecare in Japan is cost-saving to some extent. However, the government-funded model (i.e., Model 2), which typically requires use of all startup funding to be spent within the first year on system costs, was inferior to the monthly fee model (i.e., Model 1) that did not use the government funding for installation or continued operations, but rather incorporated a monthly fee from users to support the receipt of services via tele-homecare. While the benefits of Model 1 outweighed the benefits of Model 2, the government-subsidized method employed in Model 2 could be more beneficial in general if some explicit prequalifying estimated metrics are instituted prior to funding. Thus, governments need to require applicants requesting funding to note, at a minimum, (a) estimated costs, (b) the expected number of tele-homecare users, and expected benefits such as (c) WTP by the user, or (d) medical expenditure saved by tele-homecare as a means of financing some of the operational costs. Copyright © 2017 Elsevier B.V. All rights reserved.

Data on cost analysis of drilling mud displacement during drilling operation.

PubMed

Okoro, Emeka Emmanuel; Dosunmu, Adewale; Iyuke, Sunny E

2018-08-01

The focus of this research was to present a data article for analyzing the cost of displacing a drilling fluid during the drilling operation. The cost of conventional Spud, KCl and Pseudo Oil base (POBM) muds used in drilling oil and gas wells are compared with that of a Reversible Invert Emulsion Mud. The cost analysis is limited to three sections for optimum and effective Comparison. To optimize drilling operations, it is important that we specify the yardstick by which drilling performance is measured. The most relevant yardstick is the cost per foot drilled. The data have shown that the prices for drilling mud systems are a function of the mud system formulation cost for that particular mud weight and maintenance per day. These costs for different mud systems and depend on the base fluid. The Reversible invert emulsion drilling fluid, eliminates the cost acquired in displacing Pseudo Oil Based mud (POBM) from the well, possible formation damage (permeability impairment) resulting from the use of viscous pill in displacing the POBM from the wellbore, and also eliminates the risk of taking a kick during mud change-over. With this reversible mud system, the costs of special fluids that are rarely applied for the well-completion purpose (cleaning of thick mud filter cake) may be reduced to the barest minimum.

Satellite Power Systems (SPS) concept definition study. Volume 2, part 2: System engineering. [cost and programmatics

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1980-01-01

The latest technical and programmatic developments are considered as well as expansions of the Rockwell SPS cost model covering each phase of the program through the year 2030. Comparative cost/economic analyses cover elements of the satellite, construction system, space transportation vehicles and operations, and the ground receiving station. System plans to define time phased costs and planning requirements that support major milestones through the year 2000. A special analysis is included on natural resources required to build the SPS reference configuration. An appendix contains the SPS Work Breakdown Structure and dictionary along with detail cost data sheet on each system and main element of the program. Over 200 line items address DDT&E, theoretical first unit, investment cost per satellite, and operations charges for replacement capital and normal operations and maintenance costs.

Historic (1971-1975) Cost-Revenue Analysis of the Automotive Operations of the Major U.S Automotive Products Manufacturers

DOT National Transportation Integrated Search

1979-01-01

A cost-revenue analysis is performed for the manufacture of automotive vehicles for the four major U.S. automotive manufacturers: American Motors Corp., Chrysler Corp., Ford Motor Co., and General Motors Corp. The analysis used a "top-down" methodolo...

Post-operative bracing after pedicle screw fixation for thoracolumbar burst fractures: A cost-effectiveness study.

PubMed

Piazza, Matthew; Sinha, Saurabh; Agarwal, Prateek; Mallela, Arka; Nayak, Nikhil; Schuster, James; Stein, Sherman

2017-11-01

While frequently prescribed to patients following fixation for spine trauma, the utility of spinal orthoses during the post-operative period is poorly described in the literature. In this study, we calculated rates of reoperation and performed a decision analysis to determine the utility of bracing following pedicle screw fixation for thoracic and lumbar burst fractures. Pubmed was searched for articles published between 2005 and 2015 for terms related to pedicle screw fixation of thoracolumbar fractures. Additionally, a database of neurosurgical patients operated on within the authors institution was also used in the analysis. Incidences of significant adverse events (wound revision for either dehiscence or infection or re-operation for non-union or instability due to hardware failure) were determined. Pooled means and variances of reported parameters were obtained using a random-effects, inverse variance meta-analytic model for observational data. Utilities for surgical outcome and complications were assigned using previously published values. Of the 225 abstracts reviewed, 48 articles were included in the study, yielding a total of 1957 patients. After including patients from the institutional registry, together a total of 2081 patients were included in the final analysis, 1328 of whom were braced. Non-braced patients were older then braced patients, although this only approached significance (p=0.051). Braced patients had significantly lower rates of re-operation for non-union or clinically significant hardware failure (1.3% vs. 1.8%, p<0.001) although the groups had comparable rates of operative wound dehiscence and infection (p=1.000). These two approaches yielded comparable utility scores (p=0.120). Costs between braced and non-braced patients were comparable excluding the cost of the brace (p=0.256); hence, the added cost of the brace suggests that bracing post-operatively is not a cost effective measure. Bracing following operative stabilization of thoracolumbar fracture does not significantly improve stability, nor does it increase wound complications. Moreover, our data suggests that post-operative bracing may not be a cost-effective measure. Copyright © 2017. Published by Elsevier Ltd.

A System for Analyzing the Cost of Operating Vocational Education Programs at the Secondary Level in Ohio. A Study of School Year 1973-1974.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus.

As a part of Ohio's program review and evaluation of vocational education, the report is concerned with a study of the costs of operating vocational education programs throughout the State. A cost analysis system for secondary level vocational education instructional programs was developed in 1970 and has been restudied each succeeding year. The…

Energy-Systems Economic Analysis

NASA Technical Reports Server (NTRS)

Doane, J.; Slonski, M. L.; Borden, C. S.

1982-01-01

Energy Systems Economic Analysis (ESEA) program is flexible analytical tool for rank ordering of alternative energy systems. Basic ESEA approach derives an estimate of those costs incurred as result of purchasing, installing and operating an energy system. These costs, suitably aggregated into yearly costs over lifetime of system, are divided by expected yearly energy output to determine busbar energy costs. ESEA, developed in 1979, is written in FORTRAN IV for batch execution.

Optimum Repair Level Analysis (ORLA) for the Space Transportation System (STS)

NASA Technical Reports Server (NTRS)

Henry, W. R.

1979-01-01

A repair level analysis method applied to a space shuttle scenario is presented. A determination of the most cost effective level of repair for reparable hardware, the location for the repair, and a system which will accrue minimum total support costs within operational and technical constraints over the system design are defined. The method includes cost equations for comparison of selected costs to completion for assumed repair alternates.

Experiences of operational costs of HPV vaccine delivery strategies in Gavi-supported demonstration projects.

PubMed

Botwright, Siobhan; Holroyd, Taylor; Nanda, Shreya; Bloem, Paul; Griffiths, Ulla K; Sidibe, Anissa; Hutubessy, Raymond C W

2017-01-01

From 2012 to 2016, Gavi, the Vaccine Alliance, provided support for countries to conduct small-scale demonstration projects for the introduction of the human papillomavirus vaccine, with the aim of determining which human papillomavirus vaccine delivery strategies might be effective and sustainable upon national scale-up. This study reports on the operational costs and cost determinants of different vaccination delivery strategies within these projects across twelve countries using a standardized micro-costing tool. The World Health Organization Cervical Cancer Prevention and Control Costing Tool was used to collect costing data, which were then aggregated and analyzed to assess the costs and cost determinants of vaccination. Across the one-year demonstration projects, the average economic and financial costs per dose amounted to US$19.98 (standard deviation ±12.5) and US$8.74 (standard deviation ±5.8), respectively. The greatest activities representing the greatest share of financial costs were social mobilization at approximately 30% (range, 6-67%) and service delivery at about 25% (range, 3-46%). Districts implemented varying combinations of school-based, facility-based, or outreach delivery strategies and experienced wide variation in vaccine coverage, drop-out rates, and service delivery costs, including transportation costs and per diems. Size of target population, number of students per school, and average length of time to reach an outreach post influenced cost per dose. Although the operational costs from demonstration projects are much higher than those of other routine vaccine immunization programs, findings from our analysis suggest that HPV vaccination operational costs will decrease substantially for national introduction. Vaccination costs may be decreased further by annual vaccination, high initial investment in social mobilization, or introducing/strengthening school health programs. Our analysis shows that drivers of cost are dependent on country and district characteristics. We therefore recommend that countries carry out detailed planning at the national and district levels to define a sustainable strategy for national HPV vaccine roll-out, in order to achieve the optimal balance between coverage and cost.

Sludge digestion instead of aerobic stabilisation - a cost benefit analysis based on experiences in Germany.

PubMed

Gretzschel, Oliver; Schmitt, Theo G; Hansen, Joachim; Siekmann, Klaus; Jakob, Jürgen

2014-01-01

As a consequence of a worldwide increase of energy costs, the efficient use of sewage sludge as a renewable energy resource must be considered, even for smaller wastewater treatment plants (WWTPs) with design capacities between 10,000 and 50,000 population equivalent (PE). To find the lower limit for an economical conversion of an aerobic stabilisation plant into an anaerobic stabilisation plant, we derived cost functions for specific capital costs and operating cost savings. With these tools, it is possible to evaluate if it would be promising to further investigate refitting aerobic plants into plants that produce biogas. By comparing capital costs with operation cost savings, a break-even point for process conversion could be determined. The break-even point varies depending on project specific constraints and assumptions related to future energy and operation costs and variable interest rates. A 5% increase of energy and operation costs leads to a cost efficient conversion for plants above 7,500 PE. A conversion of WWTPs results in different positive effects on energy generation and plant operations: increased efficiency, energy savings, and on-site renewable power generation by digester gas which can be used in the plant. Also, the optimisation of energy efficiency results in a reduction of primary energy consumption.

Useful Life | Energy Analysis | NREL

Science.gov Websites

Useful Life Useful Life Transparent Cost Database Button The table below gives ranges on useful seeking utility-scale technology cost and performance estimates, please visit the Transparent Cost Cost (February 2016 Update) Operations & Maintenance (February 2016 Update) Utility-Scale Capacity

User participation in the development of the human/computer interface for control centers

NASA Technical Reports Server (NTRS)

Broome, Richard; Quick-Campbell, Marlene; Creegan, James; Dutilly, Robert

1996-01-01

Technological advances coupled with the requirements to reduce operations staffing costs led to the demand for efficient, technologically-sophisticated mission operations control centers. The control center under development for the earth observing system (EOS) is considered. The users are involved in the development of a control center in order to ensure that it is cost-efficient and flexible. A number of measures were implemented in the EOS program in order to encourage user involvement in the area of human-computer interface development. The following user participation exercises carried out in relation to the system analysis and design are described: the shadow participation of the programmers during a day of operations; the flight operations personnel interviews; and the analysis of the flight operations team tasks. The user participation in the interface prototype development, the prototype evaluation, and the system implementation are reported on. The involvement of the users early in the development process enables the requirements to be better understood and the cost to be reduced.

Analysis of the U.S. geological survey streamgaging network

USGS Publications Warehouse

Scott, A.G.

1987-01-01

This paper summarizes the results from the first 3 years of a 5-year cost-effectiveness study of the U.S. Geological Survey streamgaging network. The objective of the study is to define and document the most cost-effective means of furnishing streamflow information. In the first step of this study, data uses were identified for 3,493 continuous-record stations currently being operated in 32 States. In the second step, evaluation of alternative methods of providing streamflow information, flow-routing models, and regression models were developed for estimating daily flows at 251 stations of the 3,493 stations analyzed. In the third step of the analysis, relationships were developed between the accuracy of the streamflow records and the operating budget. The weighted standard error for all stations, with current operating procedures, was 19.9 percent. By altering field activities, as determined by the analyses, this could be reduced to 17.8 percent. The existing streamgaging networks in four Districts were further analyzed to determine the impacts that satellite telemetry would have on the cost effectiveness. Satellite telemetry was not found to be cost effective on the basis of hydrologic data collection alone, given present cost of equipment and operation.This paper summarizes the results from the first 3 years of a 5-year cost-effectiveness study of the U. S. Geological Survey streamgaging network. The objective of the study is to define and document the most cost-effective means of furnishing streamflow information. In the first step of this study, data uses were identified for 3,493 continuous-record stations currently being operated in 32 States. In the second step, evaluation of alternative methods of providing streamflow information, flow-routing models, and regression models were developed for estimating daily flows at 251 stations of the 3, 493 stations analyzed. In the third step of the analysis, relationships were developed between the accuracy of the streamflow records and the operating budget. The weighted standard error for all stations, with current operating procedures, was 19. 9 percent. By altering field activities, as determined by the analyses, this could be reduced to 17. 8 percent. Additional study results are discussed.

Costs of Robotic-Assisted Versus Traditional Laparoscopy in Endometrial Cancer.

PubMed

Vuorinen, Riikka-Liisa K; Mäenpää, Minna M; Nieminen, Kari; Tomás, Eija I; Luukkaala, Tiina H; Auvinen, Anssi; Mäenpää, Johanna U

2017-10-01

The purpose of this study was to compare the costs of traditional laparoscopy and robotic-assisted laparoscopy in the treatment of endometrial cancer. A total of 101 patients with endometrial cancer were randomized to the study and operated on starting from 2010 until 2013, at the Department of Obstetrics and Gynecology of Tampere University Hospital, Tampere, Finland. Costs were calculated based on internal accounting, hospital database, and purchase prices and were compared using intention-to-treat analysis. Main outcome measures were item costs and total costs related to the operation, including a 6-month postoperative follow-up. The total costs including late complications were 2160 &OV0556; higher in the robotic group (median for traditional 5823 &OV0556;, vs robot median 7983 &OV0556;, P < 0.001). The difference was due to higher costs for instruments and equipment as well as to more expensive operating room and postanesthesia care unit time. Traditional laparoscopy involved higher costs for operation personnel, general costs, medication used in the operation, and surgeon, although these costs were not substantial. There was no significant difference in in-patient stay, laboratory, radiology, blood products, or costs related to complications. According to this study, robotic-assisted laparoscopy is 37% more expensive than traditional laparoscopy in the treatment of endometrial cancer. The cost difference is mainly explained by amortization of the robot and its instrumentation.

Costs of Storing and Transporting Hydrogen

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amos, W. A.

An analysis was performed to estimate the costs associated with storing and transporting hydrogen. These costs can be added to a hydrogen production cost to determine the total delivered cost of hydrogen. Storage methods analyzed included compressed gas, liquid hydrogen, metal hydride, and underground storage. Major capital and operating costs were considered over a range of production rates and storage times.

Validation of the OpCost logging cost model using contractor surveys

Treesearch

Conor K. Bell; Robert F. Keefe; Jeremy S. Fried

2017-01-01

OpCost is a harvest and fuel treatment operations cost model developed to function as both a standalone tool and an integrated component of the Bioregional Inventory Originated Simulation Under Management (BioSum) analytical framework for landscape-level analysis of forest management alternatives. OpCost is an updated implementation of the Fuel Reduction Cost Simulator...

Microwave power transmission system studies. Volume 3, section 8: Mechanical systems and flight operations

NASA Technical Reports Server (NTRS)

Maynard, O. E.; Brown, W. C.; Edwards, A.; Haley, J. T.; Meltz, G.; Howell, J. M.; Nathan, A.

1975-01-01

The efforts and recommendations associated with preliminary design and concept definition for mechanical systems and flight operations are presented. Technical discussion in the areas of mission analysis, antenna structural concept, configuration analysis, assembly and packaging with associated costs are presented. Technology issues for the control system, structural system, thermal system and assembly including cost and man's role in assembly and maintenance are identified. Background and desired outputs for future efforts are discussed.

A user-friendly approach to cost accounting in laboratory animal facilities.

PubMed

Baker, David G

2011-08-19

Cost accounting is an essential management activity for laboratory animal facility management. In this report, the author describes basic principles of cost accounting and outlines steps for carrying out cost accounting in laboratory animal facilities. Methods of post hoc cost accounting analysis for maximizing the efficiency of facility operations are also described.

The Launch Systems Operations Cost Model

NASA Technical Reports Server (NTRS)

Prince, Frank A.; Hamaker, Joseph W. (Technical Monitor)

2001-01-01

One of NASA's primary missions is to reduce the cost of access to space while simultaneously increasing safety. A key component, and one of the least understood, is the recurring operations and support cost for reusable launch systems. In order to predict these costs, NASA, under the leadership of the Independent Program Assessment Office (IPAO), has commissioned the development of a Launch Systems Operations Cost Model (LSOCM). LSOCM is a tool to predict the operations & support (O&S) cost of new and modified reusable (and partially reusable) launch systems. The requirements are to predict the non-recurring cost for the ground infrastructure and the recurring cost of maintaining that infrastructure, performing vehicle logistics, and performing the O&S actions to return the vehicle to flight. In addition, the model must estimate the time required to cycle the vehicle through all of the ground processing activities. The current version of LSOCM is an amalgamation of existing tools, leveraging our understanding of shuttle operations cost with a means of predicting how the maintenance burden will change as the vehicle becomes more aircraft like. The use of the Conceptual Operations Manpower Estimating Tool/Operations Cost Model (COMET/OCM) provides a solid point of departure based on shuttle and expendable launch vehicle (ELV) experience. The incorporation of the Reliability and Maintainability Analysis Tool (RMAT) as expressed by a set of response surface model equations gives a method for estimating how changing launch system characteristics affects cost and cycle time as compared to today's shuttle system. Plans are being made to improve the model. The development team will be spending the next few months devising a structured methodology that will enable verified and validated algorithms to give accurate cost estimates. To assist in this endeavor the LSOCM team is part of an Agency wide effort to combine resources with other cost and operations professionals to support models, databases, and operations assessments.

Space Operations Center system analysis study extension. Volume 2: Programmatics and cost

NASA Technical Reports Server (NTRS)

1982-01-01

A summary of Space Operations Center (SOC) orbital space station costs, program options and program recommendations is presented. Program structure, hardware commonality, schedules and program phasing are considered. Program options are analyzed with respect to mission needs, design and technology options, and anticipated funding constraints. Design and system options are discussed.

Analysis of Student Loan Special Rate Allowances and Servicing Costs.

ERIC Educational Resources Information Center

Technology Management, Inc., Cambridge, MA.

This document addresses two separate, though related aspects of the operation of the Guaranteed Student Loan Program (GSLP): (1) the mechanism for setting the special rate allowance (SRA); and (2) the effect of the operating requirements of the program on lender servicing costs. The study develops recommendations for improving both aspects of the…

Small-scale nuclear reactors for remote military operations: opportunities and challenges

DTIC Science & Technology

2015-08-25

study – Report was published in March 2011  CNA study identified challenges to deploy small modular reactors (SMRs) at a base – Identified First-of...forward operating bases. The availability of deployable, cost-effective, regulated, and secure small modular reactors with a modest output electrical...defense committees on the challenges, operational requirements, constraints, cost, and life cycle analysis for a small modular reactor of less than 10

Operations and support cost modeling of conceptual space vehicles

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1994-01-01

The University of Dayton is pleased to submit this annual report to the National Aeronautics and Space Administration (NASA) Langley Research Center which documents the development of an operations and support (O&S) cost model as part of a larger life cycle cost (LCC) structure. It is intended for use during the conceptual design of new launch vehicles and spacecraft. This research is being conducted under NASA Research Grant NAG-1-1327. This research effort changes the focus from that of the first two years in which a reliability and maintainability model was developed to the initial development of an operations and support life cycle cost model. Cost categories were initially patterned after NASA's three axis work breakdown structure consisting of a configuration axis (vehicle), a function axis, and a cost axis. A revised cost element structure (CES), which is currently under study by NASA, was used to established the basic cost elements used in the model. While the focus of the effort was on operations and maintenance costs and other recurring costs, the computerized model allowed for other cost categories such as RDT&E and production costs to be addressed. Secondary tasks performed concurrent with the development of the costing model included support and upgrades to the reliability and maintainability (R&M) model. The primary result of the current research has been a methodology and a computer implementation of the methodology to provide for timely operations and support cost analysis during the conceptual design activities.

A cost evaluation methodology for surgical technologies.

PubMed

Ismail, Imad; Wolff, Sandrine; Gronfier, Agnes; Mutter, Didier; Swanström, Lee L; Swantröm, Lee L

2015-08-01

To create and validate a micro-costing methodology that surgeons and hospital administrators can use to evaluate the cost of implementing innovative surgical technologies. Our analysis is broken down into several elements of fixed and variable costs which are used to effectively and easily calculate the cost of surgical operations. As an example of application, we use data from 86 robot assisted gastric bypass operations made in our hospital. To validate our methodology, we discuss the cost reporting approaches used in 16 surgical publications with respect to 7 predefined criteria. Four formulas are created which allow users to import data from their health system or particular situation and derive the total cost. We have established that the robotic surgical system represents 97.53 % of our operating room's medical device costs which amounts to $4320.11. With a mean surgery time of 303 min, personnel cost per operation amounts to $1244.73, whereas reusable instruments and disposable costs are, respectively, $1539.69 and $3629.55 per case. The literature survey demonstrates that the cost of surgery is rarely reported or emphasized, and authors who do cover this concept do so with variable methodologies which make their findings difficult to interpret. Using a micro-costing methodology, it is possible to identify the cost of any new surgical procedure/technology using formulas that can be adapted to a variety of operations and healthcare systems. We hope that this paper will provide guidance for decision makers and a means for surgeons to harmonise cost reporting in the literature.

Industry survey of space system cost benefits from New Ways Of Doing Business

NASA Technical Reports Server (NTRS)

Rosmait, Russell L.

1992-01-01

The cost of designing, building and operating space system hardware has always been expensive. Small quantities of specialty parts escalate engineering design, production and operations cost. Funding cutbacks and shrinking revenues dictate aggressive cost saving programs. NASA's highest priority is providing economical transportation to and from space. Over the past three decades NASA has seen technological advances that provide grater efficiencies in designing, building, and operating of space system hardware. As future programs such as NLS, LUTE and SEI begin, these greater efficiencies and cost savings should be reflected in the cost models. There are several New Ways Of Doing Business (NWODB) which, when fully implemented will reduce space system costs. These philosophies and/or culture changes are integrated in five areas: (1) More Extensive Pre-Phase C/D & E, (2) Multi Year Funding Stability, (3) Improved Quality, Management and Procurement Processes, (4) Advanced Design Methods, and (5) Advanced Production Methods. Following is an overview of NWODB and the Cost Quantification Analysis results using an industry survey, one of the four quantification techniques used in the study. The NWODB Cost Quantification Analysis is a study performed at Marshall Space Flight Center by the Engineering Cost Group, Applied Research Incorporated and Pittsburg State University. This study took place over a period of four months in mid 1992. The purpose of the study was to identify potential NWODB which could lead to improved cost effectiveness within NASA and to quantify potential cost benefits that might accrue if these NWODB were implemented.

Cost Analysis of Leed Certified United States Navy Buildings

DTIC Science & Technology

2011-08-03

be accumulated in order to offset initial investment costs - St = Savings in operational costs in year t associated with a given alternative - ∆I0...ior Non-Structural Elements er.o• 2 1 Construction Waste ManagenMnt Oivort 50% fro m Disposal Crocllt 22 Construction Waste Managemen t , Divert 75... Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202- 4302. Respondents should be aware that notwithstanding

New Ways Of Doing Business (NWODB) cost quantification analysis

NASA Technical Reports Server (NTRS)

Hamaker, Joseph W.; Rosmait, Russell L.

1992-01-01

The cost of designing, producing, and operating typical aerospace flight hardware is necessarily more expensive than most other human endeavors. Because of the more stringent environment of space, hardware designed to operate there will probably always be more expensive than similar hardware which is designed for less taxing environments. It is the thesis of this study that there are very significant improvements that can be made in the cost of aerospace flight hardware.

Evaluation of The Operational Benefits Versus Costs of An Automated Cargo Mover

DTIC Science & Technology

2016-12-01

logistics footprint and life-cycle cost are presented as part of this report. Analysis of modeling and simulation results identified statistically...life-cycle cost are presented as part of this report. Analysis of modeling and simulation results identified statistically significant differences...Error of Estimation. Source: Eskew and Lawler (1994). ...........................75 Figure 24. Load Results (100 Runs per Scenario

The Potential for Helicopter Passenger Service in Major Urban Areas. [cost analysis

NASA Technical Reports Server (NTRS)

Dajani, J. S.; Stortstrom, R. G.; Warner, D. B.

1977-01-01

An interurban helicopter cost model having the capability of selecting an efficient helicopter network for a given city in terms of service and total operating costs was developed. This model which is based upon the relationship between total and direct operating costs and the number of block hours of helicopter operation is compiled in terms of a computer program which simulates the operation of an intracity helicopter fleet over a given network. When applied to specific urban areas, the model produces results in terms of a break-even air passenger market penetration rate, which is the percent of the air travelers in each of those areas that must patronize the helicopter network to make it break even commercially. A total of twenty major metropolitan areas are analyzed and are ranked initially according to cost per seat mile and then according to break-even penetration rate.

Toward lowering the cost of mission operations

NASA Technical Reports Server (NTRS)

Wall, S. D.; Ledbetter, K. W.

1993-01-01

The mission operations system is one of the more significant drivers of the cost of the mission operations and data analysis segment of missions. In large or long-lived projects, the MOS can also be a driver in total mission cost. Larger numbers of missions, together with an increasingly cost-conscious environment, dictate that future missions must more strictly control costs as they perform to their requirements. It is therefore prudent to examine the conduct of past missions for ways to conserve resources. In this paper we review inputs made to past projects' 'lessons-learned' activities, in which personnel from past projects (among other things) identified major cost drivers of MOS's and considered how economies were or might have been realized in both design and performance of their MOS. Common themes among four such reviews are summarized in an attempt to provide suggestions for cost reduction in future missions.

Robot-assisted versus open sacrocolpopexy: a cost-minimization analysis.

PubMed

Elliott, Christopher S; Hsieh, Michael H; Sokol, Eric R; Comiter, Craig V; Payne, Christopher K; Chen, Bertha

2012-02-01

Abdominal sacrocolpopexy is considered a standard of care operation for apical vaginal vault prolapse repair. Using outcomes at our center we evaluated whether the robotic approach to sacrocolpopexy is as cost-effective as the open approach. After obtaining institutional review board approval we performed cost-minimization analysis in a retrospective cohort of patients who underwent sacrocolpopexy at our institution between 2006 and 2010. Threshold values, that is model variable values at which the most cost effective approach crosses over to an alternative approach, were determined by testing model variables over realistic ranges using sensitivity analysis. Hospital billing data were also evaluated to confirm our findings. Operative time was similar for robotic and open surgery (226 vs 221 minutes) but postoperative length of stay differed significantly (1.0 vs 3.3 days, p <0.001). Base case analysis revealed an overall 10% cost savings for robot-assisted vs open sacrocolpopexy ($10,178 vs $11,307). Tornado analysis suggested that the number of institutional robotic cases done annually, length of stay and cost per hospitalization day in the postoperative period were the largest drivers of cost. Analysis of our hospital billing data showed a similar trend with robotic surgery costing 4.2% less than open surgery. A robot-assisted approach to sacrocolpopexy can be equally or less costly than an open approach. This depends on a sufficient institutional robotic case volume and a shorter postoperative stay for patients who undergo the robot-assisted procedure. Copyright © 2012 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

[Handling modern imaging procedures in a high-tech operating room].

PubMed

Hüfner, T; Citak, M; Imrecke, J; Krettek, C; Stübig, T

2012-03-01

Operating rooms are the central unit in the hospital network in trauma centers. In this area, high costs but also high revenues are generated. Modern operating theater concepts as an integrated model have been offered by different companies since the early 2000s. Our hypothesis is that integrative concepts for operating rooms, in addition to improved operating room ergonomics, have the potential for measurable time and cost savings. In our clinic, an integrated operating room concept (I-Suite, Stryker, Duisburg) was implemented after analysis of the problems. In addition to the ceiling-mounted arrangement, the system includes an endoscopy unit, a navigation system, and a voice control system. In the first 6 months (9/2005 to 2/2006), 112 procedures were performed in the integrated operating room: 34 total knee arthroplasties, 12 endoscopic spine surgeries, and 66 inpatient arthroscopic procedures (28 shoulder and 38 knee reconstructions). The analysis showed a daily saving of 22-45 min, corresponding to 15-30% of the daily changeover times, calculated to account for potential savings in the internal cost allocation of 225-450 EUR. A commercial operating room concept was evaluated in a pilot phase in terms of hard data, including time and cost factors. Besides the described effects further savings might be achieved through the effective use of voice control and the benefit of the sterile handle on the navigation camera, since waiting times for an additional nurse are minimized. The time of the procedure of intraoperative imaging is also reduced due to the ceiling-mounted concept, as the C-arm can be moved freely in the operating theater without hindering cables. By these measures and ensuing improved efficiency, the initial high costs for the implementation of the system may be cushioned over time.

Centaur operations at the space station: Cost and transportation analysis

NASA Technical Reports Server (NTRS)

1988-01-01

A study was conducted to expand on the results of an initial study entitled Centaur Operations at the Space Station. The previous study developed technology demonstration missions (TDMs) that utilized the Centaur G-prime upper stage to advance OTV technologies required for accomodations and operations at the Space Station. An initial evaluation was performed of the cost to NASA for TDM implementation. Due to the potential for commercial communication satellite operation utilizing the TDM hardware, an evaluation of the Centaur's transportation potential was also performed.

Cost Savings and Patient Experiences of a Clinic-Based, Wide-Awake Hand Surgery Program at a Military Medical Center: A Critical Analysis of the First 100 Procedures.

PubMed

Rhee, Peter C; Fischer, Michelle M; Rhee, Laura S; McMillan, Ha; Johnson, Anthony E

2017-03-01

Wide-awake, local anesthesia, no tourniquet (WALANT) hand surgery was developed to improve access to hand surgery care while optimizing medical resources. Hand surgery in the clinic setting may result in substantial cost savings for the United States Military Health Care System (MHS) and provide a safe alternative to performing similar procedures in the operating room. A prospective cohort study was performed on the first 100 consecutive clinic-based WALANT hand surgery procedures performed at a military medical center from January 2014 to September 2015 by a single hand surgeon. Cost savings analysis was performed by using the Medical Expense and Performance Reporting System, the standard cost accounting system for the MHS, to compare procedures performed in the clinic versus the operating room during the study period. A study specific questionnaire was obtained for 66 procedures to evaluate the patient's experience. For carpal tunnel release (n = 34) and A1 pulley release (n = 33), there were 85% and 70% cost savings by having the procedures performed in clinic under WALANT compared with the main operating room, respectively. During the study period, carpal tunnel release, A1 pulley release, and de Quervain release performed in the clinic instead of the operating room amounted to $393,100 in cost savings for the MHS. There were no adverse events during the WALANT procedure. A clinic-based WALANT hand surgery program at a military medical center results in considerable cost savings for the MHS. Economic/Decision Analysis IV. Copyright © 2017 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Cost/benefit analysis of advanced materials technology candidates for the 1980's, part 2

NASA Technical Reports Server (NTRS)

Dennis, R. E.; Maertins, H. F.

1980-01-01

Cost/benefit analyses to evaluate advanced material technologies projects considered for general aviation and turboprop commuter aircraft through estimated life-cycle costs, direct operating costs, and development costs are discussed. Specifically addressed is the selection of technologies to be evaluated; development of property goals; assessment of candidate technologies on typical engines and aircraft; sensitivity analysis of the changes in property goals on performance and economics, cost, and risk analysis for each technology; and ranking of each technology by relative value. The cost/benefit analysis was applied to a domestic, nonrevenue producing, business-type jet aircraft configured with two TFE731-3 turbofan engines, and to a domestic, nonrevenue producing, business type turboprop aircraft configured with two TPE331-10 turboprop engines. In addition, a cost/benefit analysis was applied to a commercial turboprop aircraft configured with a growth version of the TPE331-10.

A sensitivity analysis of process design parameters, commodity prices and robustness on the economics of odour abatement technologies.

PubMed

Estrada, José M; Kraakman, N J R Bart; Lebrero, Raquel; Muñoz, Raúl

2012-01-01

The sensitivity of the economics of the five most commonly applied odour abatement technologies (biofiltration, biotrickling filtration, activated carbon adsorption, chemical scrubbing and a hybrid technology consisting of a biotrickling filter coupled with carbon adsorption) towards design parameters and commodity prices was evaluated. Besides, the influence of the geographical location on the Net Present Value calculated for a 20 years lifespan (NPV20) of each technology and its robustness towards typical process fluctuations and operational upsets were also assessed. This comparative analysis showed that biological techniques present lower operating costs (up to 6 times) and lower sensitivity than their physical/chemical counterparts, with the packing material being the key parameter affecting their operating costs (40-50% of the total operating costs). The use of recycled or partially treated water (e.g. secondary effluent in wastewater treatment plants) offers an opportunity to significantly reduce costs in biological techniques. Physical/chemical technologies present a high sensitivity towards H2S concentration, which is an important drawback due to the fluctuating nature of malodorous emissions. The geographical analysis evidenced high NPV20 variations around the world for all the technologies evaluated, but despite the differences in wage and price levels, biofiltration and biotrickling filtration are always the most cost-efficient alternatives (NPV20). When, in an economical evaluation, the robustness is as relevant as the overall costs (NPV20), the hybrid technology would move up next to BTF as the most preferred technologies. Copyright © 2012 Elsevier Inc. All rights reserved.

Costs of genetic testing: Supporting Brazilian Public Policies for the incorporating of molecular diagnostic technologies

PubMed Central

Schlatter, Rosane Paixão; Matte, Ursula; Polanczyk, Carisi Anne; Koehler-Santos, Patrícia; Ashton-Prolla, Patricia

2015-01-01

This study identifies and describes the operating costs associated with the molecular diagnosis of diseases, such as hereditary cancer. To approximate the costs associated with these tests, data informed by Standard Operating Procedures for various techniques was collected from hospital software and a survey of market prices. Costs were established for four scenarios of capacity utilization to represent the possibility of suboptimal use in research laboratories. Cost description was based on a single site. The results show that only one technique was not impacted by rising costs due to underutilized capacity. Several common techniques were considerably more expensive at 30% capacity, including polymerase chain reaction (180%), microsatellite instability analysis (181%), gene rearrangement analysis by multiplex ligation probe amplification (412%), non-labeled sequencing (173%), and quantitation of nucleic acids (169%). These findings should be relevant for the definition of public policies and suggest that investment of public funds in the establishment of centralized diagnostic research centers would reduce costs to the Public Health System. PMID:26500437

Ballast Water Treatment, U.S. Great Lakes Bulk Carrier Engineering and Cost Study. Volume 2: Analysis of On-Board Treatment Methods, Alternative Ballast Water Management Practices, and Implementation Costs

DTIC Science & Technology

2013-11-01

flushing filter, disinfection with injected chlorine dioxide (chlorine dioxide is generated onboard from two component chemicals, sulfuric acid...Management System 400 80 250-8000 (10000) Sulfuric Acid and Purate for ClO2 generation Yes 0.005-0.028 8-18 Decreased sediment, potential corrosion...feed chemicals, Purate and sulfuric acid. 5. Operational and Maintenance Cost: Estimated operating and maintenance cost is $80/1000 m3 of ballast

Operative outcome and hospital cost.

PubMed

Ferraris, V A; Ferraris, S P; Singh, A

1998-03-01

Because of concern about increasing health care costs, we undertook a study to find patient risk factors associated with increased hospital costs and to evaluate the relationship between increased cost and in-hospital mortality and serious morbidity. More than 100 patient variables were screened in 1221 patients undergoing cardiac procedures. Simultaneously, patient hospital costs were computed from the cost-to-charge ratio. Univariate and multivariate statistics were used to explore the relationship between hospital cost and patient outcomes, including operative death, in-hospital morbidity, and length of stay. The greatest costs were for 31 patients who did not survive operation ($74,466, 95% confidence interval $27,102 to $198,025), greater than the costs for 120 patients who had serious, nonfatal morbidity ($60,335, 95% confidence interval $28,381 to $130,897, p = 0.02) and those for 1070 patients who survived operation without complication ($31,459, 95% confidence interval $21,944 to $49,849, p = 0.001). Breakdown of the components of hospital costs in fatalities and in cases with nonfatal complications revealed that the greatest contributions were in anesthesia and operating room costs. Significant (by stepwise linear regression analysis) independent risks for increased hospital cost were as follows (in order of decreasing importance): (1) preoperative congestive heart failure, (2) serum creatinine level greater than 2.5 mg/dl, (3) New York state predicted mortality risk, (4), type of operation (coronary artery bypass grafting, valve, valve plus coronary artery bypass grafting, or other), (5) preoperative hematocrit, (6) need for reoperative procedure, (7) operative priority, and (8) sex. These risks were different than those for in-hospitality death or increased length of stay. Hospital cost correlated with length of stay (r = 0.63, p < 0.001), but there were many outliers at the high end of the hospital cost spectrum. We conclude that operative death is the most costly outcome; length of stay is an unreliable indicator of hospital cost, especially at the high end of the cost spectrum; risks of increased hospital cost are different than those for perioperative mortality or increased length of stay; and ventricular dysfunction in elderly patients undergoing urgent operations for other than coronary disease is associated with increased cost. Certain patient factors, such as preoperative anemia and congestive heart failure, are amenable to preoperative intervention to reduce costs, and a high-risk patient profile can serve as a target for cost-reduction strategies.

Comparison of minimally invasive parathyroidectomy under local anaesthesia and minimally invasive video-assisted parathyroidectomy for primary hyperparathyroidism: a cost analysis

PubMed Central

MELFA, G.I.; RASPANTI, C.; ATTARD, M.; COCORULLO, G.; ATTARD, A.; MAZZOLA, S.; SALAMONE, G.; GULOTTA, G.; SCERRINO, G.

2016-01-01

Background Primary hyperparathyroidism (PHPT) origins from a solitary adenoma in 70–95% of cases. Moreover, the advances in methods for localizing an abnormal parathyroid gland made minimally invasive techniques more prominent. This study presents a micro-cost analysis of two parathyroidectomy techniques. Patients and methods 72 consecutive patients who underwent minimally invasive parathyroidectomy, video-assisted (MIVAP, group A, 52 patients) or “open” under local anaesthesia (OMIP, group B, 20 patients) for PHPT were reviewed. Operating room, consumable, anaesthesia, maintenance costs, equipment depreciation and surgeons/anaesthesiologists fees were evaluated. The patient’s satisfaction and the rate of conversion to conventional parathyroidectomy were investigated. T-Student’s, Kolmogorov-Smirnov tests and Odds Ratio were used for statistical analysis. Results 1 patient of the group A and 2 of the group B were excluded from the cost analysis because of the conversion to the conventional technique. Concerning the remnant patients, the overall average costs were: for Operative Room, 1186,69 € for the MIVAP group (51 patients) and 836,11 € for the OMIP group (p<0,001); for the Team, 122,93 € (group A) and 90,02 € (group B) (p<0,001); the other operative costs were 1388,32 € (group A) and 928,23 € (group B) (p<0,001). The patient’s satisfaction was very strongly in favour of the group B (Odds Ratio 20,5 with a 95% confidence interval). Conclusions MIVAP is more expensive compared to the “open” parathyroidectomy under local anaesthesia due to the costs of general anaesthesia and the longer operative time. Moreover, the patients generally prefer the local anaesthesia. Nevertheless, the rate of conversion to the conventional parathyroidectomy was relevant in the group of the local anaesthesia compared to the MIVAP, since the latter allows a four-gland exploration. PMID:27381690

Money well spent: a comparison of hospital operating margin for laparoscopic and open colectomies.

PubMed

Koopmann, M C; Harms, B A; Heise, C P

2007-10-01

Cost analysis after laparoscopic colectomy has been examined, although reports evaluating the effects of laparoscopy on hospital operating margin are lacking. We compared several cost/revenue measures, including hospital operating margin, between open and laparoscopic colectomies at an academic center. Our cost-accounting database was queried for laparoscopic partial (LPC) and total colectomies (LTC), and open partial (OPC) and total colectomies (OTC) to analyze net revenue, total costs, and total hospital operating margin over a 4-year period. Laparoscopic and open colectomy cases were compared, with mean operating margin as the primary outcome. From July, 2002 through May, 2006, 842 patients were included for analysis with 138 undergoing laparoscopic colectomy. Net revenue was higher in the LTC group compared with open (US dollars 30,300 vs US dollars 26,800 [P = .02]), and lower in the LPC group (US dollars 15,300 vs US dollars 21,300 open [P < .0001]). Total costs were reduced in both the LPC and LTC groups compared with open [US dollars 11,700 vs US dollars 17,600 [P < .0001] and US dollars 18,000 vs US dollars 19,400 [P = .0019], respectively). LPC resulted in a similar HOM (US dollars 3,602) compared with OPC (US dollars 3,647; P = .35). LTC resulted in a higher HOM (US dollars 12,300) compared with OTC (US dollars 7,400; P = .02). LTC generates a significantly higher hospital operating margin than an OTC, although the margins are similar for LPC and OPC.

Parametric study of potential early commercial power plants Task 3-A MHD cost analysis

NASA Technical Reports Server (NTRS)

1983-01-01

The development of costs for an MHD Power Plant and the comparison of these costs to a conventional coal fired power plant are reported. The program is divided into three activities: (1) code of accounts review; (2) MHD pulverized coal power plant cost comparison; (3) operating and maintenance cost estimates. The scope of each NASA code of account item was defined to assure that the recently completed Task 3 capital cost estimates are consistent with the code of account scope. Improvement confidence in MHD plant capital cost estimates by identifying comparability with conventional pulverized coal fired (PCF) power plant systems is undertaken. The basis for estimating the MHD plant operating and maintenance costs of electricity is verified.

Shuttle's 160 hour ground turnaround - A design driver

NASA Technical Reports Server (NTRS)

Widick, F.

1977-01-01

Turnaround analysis added a new dimension to the Space Program with the advent of the Space Shuttle. The requirement to turn the flight hardware around in 160 working hours from landing to launch was a significant design driver and a useful tool in forcing the integration of flight and ground systems design to permit an efficient ground operation. Although there was concern that time constraints might increase program costs, the result of the analysis was to minimize facility requirements and simplify operations with resultant cost savings.

Networks and the fiscal performance of rural hospitals in Oklahoma: are they associated?

PubMed

Broyles, R W; Brandt, E N; Biard-Holmes, D

1998-01-01

This paper uses regression analysis to explore the relation of network membership to the financial performance of rural hospitals in Oklahoma during fiscal year 1995. After adjusting for the scope of service, as measured by the number of facilities or services offered by the hospital, indicators of fiscal status are (1) the cash receipts derived from net patient revenue; (2) the cash disbursements related to operating costs, net of interest and depreciation expense, labor costs and nonlabor costs; and (3) net cash flow, defined as the difference between cash receipts and disbursements. Controlling for the effects of the hospital's structural attributes, operating characteristics and market conditions, the results indicate that members of a network reported lower net operating costs, labor costs and nonlabor expenses per service than nonmembers. Hence, the analysis seems to suggest that the membership of rural hospitals in a network is associated with lower cash disbursements and an improved net cash flow, outcomes that may preserve their fiscal viability and the access of the population at risk to service.

The cost of a large-scale hollow fibre MBR.

PubMed

Verrecht, Bart; Maere, Thomas; Nopens, Ingmar; Brepols, Christoph; Judd, Simon

2010-10-01

A cost sensitivity analysis was carried out for a full-scale hollow fibre membrane bioreactor to quantify the effect of design choices and operational parameters on cost. Different options were subjected to a long term dynamic influent profile and evaluated using ASM1 for effluent quality, aeration requirements and sludge production. The results were used to calculate a net present value (NPV), incorporating both capital expenditure (capex), based on costs obtained from equipment manufacturers and full-scale plants, and operating expenditure (opex), accounting for energy demand, sludge production and chemical cleaning costs. Results show that the amount of contingency built in to cope with changes in feedwater flow has a large impact on NPV. Deviation from a constant daily flow increases NPV as mean plant utilisation decreases. Conversely, adding a buffer tank reduces NPV, since less membrane surface is required when average plant utilisation increases. Membrane cost and lifetime is decisive in determining NPV: an increased membrane replacement interval from 5 to 10 years reduces NPV by 19%. Operation at higher SRT increases the NPV, since the reduced costs for sludge treatment are offset by correspondingly higher aeration costs at higher MLSS levels, though the analysis is very sensitive to sludge treatment costs. A higher sustainable flux demands greater membrane aeration, but the subsequent opex increase is offset by the reduced membrane area and the corresponding lower capex. Copyright © 2010 Elsevier Ltd. All rights reserved.

Cost analysis of new and retrofit hot-air type solar assisted heating systems

NASA Technical Reports Server (NTRS)

Stewart, R. D.; Hawkins, B. J.

1978-01-01

A detailed cost analysis/cost improvement study was performed on two Department of Energy/National Aeronautics and Space Administration operational test sites to determine actual costs and potential cost improvements of new and retrofit hot air type, solar assisted heating and hot water systems for single family sized structures. This analysis concentrated on the first cost of a system which included procurement, installation, and integration of a solar assisted heating and hot water system on a new or retrofit basis; it also provided several cost projections which can be used as inputs to payback analyses, depending upon the degree of optimism or future improvements assumed. Cost definitions were developed for five categories of cost, and preliminary estimates were developed for each. The costing methodology, approach, and results together with several candidate low cost designs are described.

Solar Market Research and Analysis Projects | Solar Research | NREL

Science.gov Websites

increase the effectiveness and reduce the variability and cost of PV operations and maintenance (O&M significantly drive up the cost of electricity for PV systems. To help reduce PV O&M costs and improve PV -Storage: Reducing Barriers Through Cost-Optimization and Market Characterization While falling costs have

[Development of an Operational Model for the Application of Planning-Programming-Budgeting Systems in Local School Districts. Program Budgeting Note 3, Cost-Effectiveness Analysis: What Is It?

ERIC Educational Resources Information Center

State Univ. of New York, Buffalo. Western New York School Study Council.

Cost effectiveness analysis is used in situations where benefits and costs are not readily converted into a money base. Five elements can be identified in such an analytic process: (1) The objective must be defined in terms of what it is and how it is attained; (2) alternatives to the objective must be clearly definable; (3) the costs must be…

Contracted versus District-Operated Pupil Transportation Programs: An Analysis of Cost and Program Differences. Report 96-04.

ERIC Educational Resources Information Center

Idaho State Legislature, Boise. Office of Performance Evaluation.

In June 1995, the Idaho Joint Legislative Oversight Committee directed the Office of Performance Evaluations to conduct an evaluation of school district pupil transportation. This report, the last in a series of four, examines the apparent cost difference between district-operated transportation programs and those that are contracted to…

Revenue and Expenses of Ontario Universities, 1981-82. Volume IV, Physical Plant Operating Expenses.

ERIC Educational Resources Information Center

Council of Ontario Universities, Toronto. Research Div.

Results of an annual survey provide an analysis of physical plant costs by major functional area and object of expense, as reported in each university's operating fund. The principles observed in reporting, definitions, and explanatory comments on the cost categories and their scopes precede a series of summary tables for: total and percentage…

Community College Finance: A Cost Analysis of Community College Expenditures Related to Maintenance and Operations

ERIC Educational Resources Information Center

Collins, Michael T.

2011-01-01

The purpose of this study is to develop a costing model for maintenance and operations expenditures among 16 single-campus California community college districts and assess the impact of a variety of variables including size of student enrollment, physical plant age, acreage, gross square footage, and general obligation facility bonds on district…

Production cost analysis of Euphorbia lathyris. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendel, D.A.; Schooley, F.A.; Dickenson, R.L.

1979-08-01

The purpose of SRI's study was to estimate the costs of producing Euphorbia in commercial quantities in five regions of the United States, which include both irrigated and nonirrigated areas. The study assumed that a uniform crop yield could be achieved in the five regions by varying the quantities of production inputs. Therefore, the production costs estimates, which are based on fourth quarter 1978 dollars, include both fixed and variable costs for each region. Doane's Machinery Custom Rates for 1978 were used to estimate all variable costs except materials, which were estimated separately. Custom rates are determined by members ofmore » the Doane Countywide Farm Panel, a group of farmers specifically selected to represent the various sizes and types of commercial farms found throughout the country. The rates reported are the most recent rates the panel members had either paid, charged, or known for certain a second party had paid or charged. Custom rates for any particular operation include equipment operating costs (fuel, lubrication, and repairs), equipment ownership costs (depreciation, taxes, interest), as well as a labor charge for the operator. Custom rates are regionally specific and thereby assist the accuracy of this analysis. Fixed costs include land, management, and transportation of the plant material to a conversion facility. When appropriate, fixed costs were regionally specific. Changes in total production costs over future time periods were not addressed. The total estimated production costs of Euphorbia in each region were compared with production costs for corn and alfalfa in the same regions. Finally, the effects on yield and costs of changes in the production inputs were estimated.« less

Cost of post-operative intravenous iron therapy in total lower limb arthroplasty: a retrospective, matched cohort study

PubMed Central

Muñoz, Manuel; Gómez-Ramírez, Susana; Martín-Montañez, Elisa; Naveira, Enrique; Seara, Javier; Pavía, José

2014-01-01

Background Requirements for allogeneic red cell transfusion after total lower limb arthroplasty are still high (20–50%), and post-operative intravenous iron has been shown to reduce transfusion requirements for this surgery. We performed a cost analysis to ascertain whether this alternative is also likely to be cost-effective. Materials and methods Data from 182 matched-pairs of total lower limb arthroplasty patients, managed with a restrictive transfusion protocol and without (control group) or with post-operative intravenous iron (iron group), were retrospectively reviewed. Acquisition and administration costs of iron (iron sucrose or ferric carboxymaltose) and allogeneic red cell concentrates, haemoglobin measurements, and prolonged stay in hospital were used for blood management cost analysis. Results Patients in the iron group received 600 mg intravenous iron, without clinically relevant incidents, and had a lower allogeneic transfusion rate (11.5% vs 26.4% for the iron and control groups, respectively; p=0.001). The reduction in transfusion rate was more pronounced in anaemic patients (17% vs 40%; p=0.015) than in non-anaemic ones (9.6% vs 21.2%; p=0.011). There were no differences with respect to post-operative infection rate. Patients receiving allogeneic transfusion stayed in hospital longer (+1.9 days [95% CI: 1.2–2.6]). As intravenous iron reduces the allogeneic transfusion rate, both iron formulations were cost-neutral in the different cost scenarios (−25.5 to 62.1 €/patient for iron sucrose, and −51.1 to 64.4 €/patient for ferric carboxymaltose). Discussion In patients presenting with or without pre-operative anaemia, post-operative intravenous iron after total lower limb arthroplasty seems to be safe and is associated with reduced transfusion rates, without incremental costs. For anaemic patients, its efficacy could be increased by associating some other blood-saving method. PMID:24120595

Carbon/graphite fiber risk analysis and assessment study: Assessment of risk to the Lockheed Model L-1011 commercial transport aircraft

NASA Technical Reports Server (NTRS)

Daniledes, J.; Koch, J. R.

1980-01-01

The risk associated with the accidental release of carbon/graphite fibers (CF) from fires on commercial transport aircraft incorporating composite materials was assessed. Data are developed to evaluate the potential for CF damage to electrical and electronic equipment, assess the cost risk, and evaluate the hazard to continued operation. The subjects covered include identification of susceptible equipments, determination of infiltration transfer functions, analysis of airport operations, calculation of probabilities of equipment failures, assessment of the cost risk, and evaluation of the hazard to continued operation. The results show the risks associated with CF contamination are negligible through 1993.

Economic analysis of electronic waste recycling: modeling the cost and revenue of a materials recovery facility in California.

PubMed

Kang, Hai-Yong; Schoenung, Julie M

2006-03-01

The objectives of this study are to identify the various techniques used for treating electronic waste (e-waste) at material recovery facilities (MRFs) in the state of California and to investigate the costs and revenue drivers for these techniques. The economics of a representative e-waste MRF are evaluated by using technical cost modeling (TCM). MRFs are a critical element in the infrastructure being developed within the e-waste recycling industry. At an MRF, collected e-waste can become marketable output products including resalable systems/components and recyclable materials such as plastics, metals, and glass. TCM has two main constituents, inputs and outputs. Inputs are process-related and economic variables, which are directly specified in each model. Inputs can be divided into two parts: inputs for cost estimation and for revenue estimation. Outputs are the results of modeling and consist of costs and revenues, distributed by unit operation, cost element, and revenue source. The results of the present analysis indicate that the largest cost driver for the operation of the defined California e-waste MRF is the materials cost (37% of total cost), which includes the cost to outsource the recycling of the cathode ray tubes (CRTs) (dollar 0.33/kg); the second largest cost driver is labor cost (28% of total cost without accounting for overhead). The other cost drivers are transportation, building, and equipment costs. The most costly unit operation is cathode ray tube glass recycling, and the next are sorting, collecting, and dismantling. The largest revenue source is the fee charged to the customer; metal recovery is the second largest revenue source.

Costs to Automate Demand Response - Taxonomy and Results from Field Studies and Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piette, Mary A.; Schetrit, Oren; Kiliccote, Sila

During the past decade, the technology to automate demand response (DR) in buildings and industrial facilities has advanced significantly. Automation allows rapid, repeatable, reliable operation. This study focuses on costs for DR automation in commercial buildings with some discussion on residential buildings and industrial facilities. DR automation technology relies on numerous components, including communication systems, hardware and software gateways, standards-based messaging protocols, controls and integration platforms, and measurement and telemetry systems. This report compares cost data from several DR automation programs and pilot projects, evaluates trends in the cost per unit of DR and kilowatts (kW) available from automated systems,more » and applies a standard naming convention and classification or taxonomy for system elements. Median costs for the 56 installed automated DR systems studied here are about $200/kW. The deviation around this median is large with costs in some cases being an order of magnitude great or less than the median. This wide range is a result of variations in system age, size of load reduction, sophistication, and type of equipment included in cost analysis. The costs to automate fast DR systems for ancillary services are not fully analyzed in this report because additional research is needed to determine the total cost to install, operate, and maintain these systems. However, recent research suggests that they could be developed at costs similar to those of existing hot-summer DR automation systems. This report considers installation and configuration costs and does include the costs of owning and operating DR automation systems. Future analysis of the latter costs should include the costs to the building or facility manager costs as well as utility or third party program manager cost.« less

Cost and performance model for redox flow batteries

NASA Astrophysics Data System (ADS)

Viswanathan, Vilayanur; Crawford, Alasdair; Stephenson, David; Kim, Soowhan; Wang, Wei; Li, Bin; Coffey, Greg; Thomsen, Ed; Graff, Gordon; Balducci, Patrick; Kintner-Meyer, Michael; Sprenkle, Vincent

2014-02-01

A cost model is developed for all vanadium and iron-vanadium redox flow batteries. Electrochemical performance modeling is done to estimate stack performance at various power densities as a function of state of charge and operating conditions. This is supplemented with a shunt current model and a pumping loss model to estimate actual system efficiency. The operating parameters such as power density, flow rates and design parameters such as electrode aspect ratio and flow frame channel dimensions are adjusted to maximize efficiency and minimize capital costs. Detailed cost estimates are obtained from various vendors to calculate cost estimates for present, near-term and optimistic scenarios. The most cost-effective chemistries with optimum operating conditions for power or energy intensive applications are determined, providing a roadmap for battery management systems development for redox flow batteries. The main drivers for cost reduction for various chemistries are identified as a function of the energy to power ratio of the storage system. Levelized cost analysis further guide suitability of various chemistries for different applications.

Nurse staffing patterns and hospital efficiency in the United States.

PubMed

Bloom, J R; Alexander, J A; Nuchols, B A

1997-01-01

The objective of this exploratory study was to assess the effects of four nurse staffing patterns on the efficiency of patient care delivery in the hospital: registered nurses (RNs) from temporary agencies; part-time career RNs; RN rich skill mix; and organizationally experienced RNs. Using Transaction Cost Analysis, four regression models were specified to consider the effect of these staffing plans on personnel and benefit costs and on non-personnel operating costs. A number of additional variables were also included in the models to control for the effect of other organization and environmental determinants of hospital costs. Use of career part-time RNs and experienced staff reduced both personnel and benefit costs, as well as total non-personnel operating costs, while the use of temporary agencies for RNs increased non-personnel operating costs. An RN rich skill mix was not related to either measure of hospital costs. These findings provide partial support of the theory. Implications of our findings for future research on hospital management are discussed.

Optimizing Air Transportation Service to Metroplex Airports. Part 1; Analysis of Historical Data

NASA Technical Reports Server (NTRS)

Donohue, George; Hoffman, Karla; Sherry, Lance; Ferguson, John; Kara, Abdul Qadar

2010-01-01

The air transportation system is a significant driver of the U.S. economy, providing safe, affordable, and rapid transportation. During the past three decades airspace and airport capacity has not grown in step with demand for air transportation (+4% annual growth), resulting in unreliable service and systemic delays. Estimates of the impact of delays and unreliable air transportation service on the economy range from $32B to $41B per year. This report describes the results of an analysis of airline strategic decision-making with regards to: (1) geographic access, (2) economic access, and (3) airline finances. This analysis evaluated markets-served, scheduled flights, aircraft size, airfares, and profit from 2005-2009. During this period, airlines experienced changes in costs of operation (due to fluctuations in hedged fuel prices), changes in travel demand (due to changes in the economy), and changes in infrastructure capacity (due to the capacity limits at EWR, JFK, and LGA). This analysis captures the impact of the implementation of capacity limits at airports, as well as the effect of increased costs of operation (i.e. hedged fuel prices). The increases in costs of operation serve as a proxy for increased costs per flight that might occur if auctions or congestion pricing are imposed.

Launching a medicare advantage plan: smart planning saves headaches.

PubMed

Abrams, Robert J; Mullaney, Teri L

2007-11-01

If you're considering setting up a Medicare Advantage plan, the following are important considerations: Financial analysis. Payment rates. Medical costs. Marketing and operational costs. Technology infrastructure. Staffing.

75 FR 59323 - Early Scoping for the Alternatives Analysis of the North Corridor Transit Project in Metropolitan...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... impacts and benefits to be considered, the capital and operating costs, the financial plans and other... evaluating the costs, benefits, and impacts of a range of transportation alternatives designed to address... maintenance costing, and environmental and land use analyses. Finally, costs, benefits, and impacts of each...

Cost Accounting: Problems and Research Related to Cost Definitions and Collection of Data

ERIC Educational Resources Information Center

Lyons, John M.

1978-01-01

Recent evidence suggests that traditional cost analysis may not be the most appropriate way to justify educational budgets. This article suggests that using constructed cost models to develop operating budget requests can help ensure that the distinction between legitimate information needs and managerial autonomy is maintained. (LBH)

Staging Options for the Air Force’s Electronic Combat Test Capability: a Cost Analysis

DTIC Science & Technology

1990-09-01

strategic in nature and completely different than daily operating decisions (20:6). Horngren , in his book Cost Accounting : A Managerial Emphasis...AFIT/GCA/LSY/90S-3 DTTC S E-191 J) C, STAGING OPTIONS FOR THE AIR FORCE’S ELECTRONIC COMBAT TEST CAPABILITY: A COST ANALYSIS THESIS Joseph J. Landino...Alternative Costs ......... 56 v AFIT/GCA/LSY/90S-3 Abstract This study’s purpose was to identify the lowest cost aircraft staging base( s ) for the Air

Coal gasification systems engineering and analysis. Appendix E: Cost estimation and economic evaluation methodology

NASA Technical Reports Server (NTRS)

1980-01-01

The cost estimation and economic evaluation methodologies presented are consistent with industry practice for assessing capital investment requirements and operating costs of coal conversion systems. All values stated are based on January, 1980 dollars with appropriate recognition of the time value of money. Evaluation of project economic feasibility can be considered a two step process (subject to considerable refinement). First, the costs of the project must be quantified and second, the price at which the product can be manufacturd must be determined. These two major categories are discussed. The summary of methodology is divided into five parts: (1) systems costs, (2)instant plant costs, (3) annual operating costs, (4) escalation and discounting process, and (5) product pricing.

Life Cycle Cost Analysis Handbook. First Edition.

ERIC Educational Resources Information Center

Alaska State Dept. of Education and Early Development, Juneau.

This handbook presents guidelines on the Life Cycle Cost Analysis (LCCA) of building operations over the life of a building to assist school districts and consultants with evaluating proposed educational facility construction projects. It defines the terminology found in an LCCA, such as initial and future expenses, residual value, real discount…

Experiences of operational costs of HPV vaccine delivery strategies in Gavi-supported demonstration projects

PubMed Central

Holroyd, Taylor; Nanda, Shreya; Bloem, Paul; Griffiths, Ulla K.; Sidibe, Anissa; Hutubessy, Raymond C. W.

2017-01-01

From 2012 to 2016, Gavi, the Vaccine Alliance, provided support for countries to conduct small-scale demonstration projects for the introduction of the human papillomavirus vaccine, with the aim of determining which human papillomavirus vaccine delivery strategies might be effective and sustainable upon national scale-up. This study reports on the operational costs and cost determinants of different vaccination delivery strategies within these projects across twelve countries using a standardized micro-costing tool. The World Health Organization Cervical Cancer Prevention and Control Costing Tool was used to collect costing data, which were then aggregated and analyzed to assess the costs and cost determinants of vaccination. Across the one-year demonstration projects, the average economic and financial costs per dose amounted to US$19.98 (standard deviation ±12.5) and US$8.74 (standard deviation ±5.8), respectively. The greatest activities representing the greatest share of financial costs were social mobilization at approximately 30% (range, 6–67%) and service delivery at about 25% (range, 3–46%). Districts implemented varying combinations of school-based, facility-based, or outreach delivery strategies and experienced wide variation in vaccine coverage, drop-out rates, and service delivery costs, including transportation costs and per diems. Size of target population, number of students per school, and average length of time to reach an outreach post influenced cost per dose. Although the operational costs from demonstration projects are much higher than those of other routine vaccine immunization programs, findings from our analysis suggest that HPV vaccination operational costs will decrease substantially for national introduction. Vaccination costs may be decreased further by annual vaccination, high initial investment in social mobilization, or introducing/strengthening school health programs. Our analysis shows that drivers of cost are dependent on country and district characteristics. We therefore recommend that countries carry out detailed planning at the national and district levels to define a sustainable strategy for national HPV vaccine roll-out, in order to achieve the optimal balance between coverage and cost. PMID:29016596

Cost analysis of spinal and general anesthesia for the surgical treatment of lumbar spondylosis.

PubMed

Walcott, Brian P; Khanna, Arjun; Yanamadala, Vijay; Coumans, Jean-Valery; Peterfreund, Robert A

2015-03-01

Lumbar spine surgery is typically performed under general anesthesia, although spinal anesthesia can also be used. Given the prevalence of lumbar spine surgery, small differences in cost between the two anesthetic techniques have the potential to make a large impact on overall healthcare costs. We sought to perform a cost comparison analysis of spinal versus general anesthesia for lumbar spine operations. Following Institutional Review Board approval, a retrospective cohort study was performed from 2009-2012 on consecutive patients undergoing non-instrumented, elective lumbar spine surgery for spondylosis by a single surgeon. Each patient was evaluated for both types of anesthesia, with the decision for anesthetic method being made based on a combination of physical status, anatomical considerations, and ultimately a consensus agreement between patient, surgeon, and anesthesiologist. Patient demographics and clinical characteristics were compared between the two groups. Operating room costs were calculated whilst blinded to clinical outcomes and reported in percentage difference. General anesthesia (n=319) and spinal anesthesia (n=81) patients had significantly different median operative times of 175 ± 39.08 and 158 ± 32.75 minutes, respectively (p<0.001, Mann-Whitney U test). Operating room costs were 10.33% higher for general anesthesia compared to spinal anesthesia (p=0.003, Mann-Whitney U test). Complications of spinal anesthesia included excessive movement (n=1), failed spinal attempt (n=3), intraoperative conversion to general anesthesia (n=2), and a high spinal level (n=1). In conclusion, spinal anesthesia can be performed safely in patients undergoing lumbar spine surgery. It has the potential to reduce operative times, costs, and possibly, complications. Further prospective evaluation will help to validate these findings. Copyright © 2014 Elsevier Ltd. All rights reserved.

[Development of performance evaluation and management system on advanced schistosomiasis medical treatment].

PubMed

Zhou, Xiao-Rong; Huang, Shui-Sheng; Gong, Xin-Guo; Cen, Li-Ping; Zhang, Cong; Zhu, Hong; Yang, Jun-Jing; Chen, Li

2012-04-01

To construct a performance evaluation and management system on advanced schistosomiasis medical treatment, and analyze and evaluate the work of the advanced schistosomiasis medical treatment over the years. By applying the database management technique and C++ programming technique, we inputted the information of the advanced schistosomiasis cases into the system, and comprehensively evaluated the work of the advanced schistosomiasis medical treatment through the cost-effect analysis, cost-effectiveness analysis, and cost-benefit analysis. We made a set of software formula about cost-effect analysis, cost-effectiveness analysis, and cost-benefit analysis. This system had many features such as clear building, easy to operate, friendly surface, convenient information input and information search. It could benefit the performance evaluation of the province's advanced schistosomiasis medical treatment work. This system can satisfy the current needs of advanced schistosomiasis medical treatment work and can be easy to be widely used.

COST–RISK–BENEFIT ANALYSIS IN DIAGNOSTIC RADIOLOGY: A THEORETICAL AND ECONOMIC BASIS FOR RADIATION PROTECTION OF THE PATIENT

PubMed Central

Moores, B. Michael

2016-01-01

In 1973, International Commission on Radiological Protection Publication 22 recommended that the acceptability of radiation exposure levels for a given activity should be determined by a process of cost–benefit analysis. It was felt that this approach could be used to underpin both the principle of ALARA as well for justification purposes. The net benefit, B, of an operation involving irradiation was regarded as equal to the difference between its gross benefit, V, and the sum of three components; the basic production cost associated with the operation, P; the cost of achieving the selected level of protection, X; and the cost Y of the detriment involved in the operation: B=V−(P+X+Y). This article presents a theoretical cost–risk–benefit analysis that is applicable to the diagnostic accuracy (Levels 1 and 2) of the hierarchical efficacy model presented by National Council on Radiation Protection and Measurements in 1992. This enables the costs of an examination to be related to the sensitivity and specificity of an X-ray examination within a defined clinical problem setting and introduces both false-positive/false-negative diagnostic outcomes into the patient radiation protection framework. PMID:26705358

Cost analysis of oxygen recovery systems

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

Report is made of the cost analysis of four leading oxygen recovery subsystems which include two carbon dioxide reduction subsystems and two water electrolysis subsystems, namely, the solid polymer electrolyte and the circulating KOH electrolyte. The four oxygen recovery systems were quantitatively evaluated. System characteristics, including process flows, performance, and physical characteristics were also analyzed. Additionally, the status of development of each of the systems considered and the required advance technology efforts required to bring conceptual and/or pre-prototype hardware to an operational prototype status were defined. Intimate knowledge of the operations, development status, and capabilities of the systems to meet space mission requirements were found to be essential in establishing the cost estimating relationships for advanced life support systems.

DORCA II: Dynamic operations requirements and cost analysis program

NASA Technical Reports Server (NTRS)

1976-01-01

Program is written to handle logistics of acquisition and transport of personnel, equipment, and services and to determine costs, transport schedules, acquisition schedules, and fuel requirements of cargo transport.

STARPAHC operational report

NASA Technical Reports Server (NTRS)

1977-01-01

The results of the first one and one-half years of operation of the STARPAHC system are presented. An operational cost summary analysis is included as well as the following; (1) Medical evaluation results, (2) system usage, and (3) hardware evaluation results.

Air Force Reusable Booster System A Quick-look, Design Focused Modeling and Cost Analysis Study

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2011-01-01

Presents work supporting the Air force Reusable Booster System (RBS) - A Cost Study with Goals as follows: Support US launch systems decision makers, esp. in regards to the research, technology and demonstration investments required for reusable systems to succeed. Encourage operable directions in Reusable Booster / Launch Vehicle Systems technology choices, system design and product and process developments. Perform a quick-look cost study, while developing a cost model for more refined future analysis.

The costs of transit fare prepayment programs : a parametric cost analysis.

DOT National Transportation Integrated Search

Despite the renewed interest in transit fare prepayment plans over the past : 10 years, few transit managers have a clear idea of how much it costs to operate : and maintain a fare prepayment program. This report provides transit managers : with the ...

Analysis on logistic company action toward the access restriction policy on freight vehicle

NASA Astrophysics Data System (ADS)

Nur, Muhammad; Hadiwardoyo, Sigit P.; Nahry, Nahdalina

2017-06-01

The high volume of freight vehicles that enters, leaves or passes through the urban areas, especially Jakarta, has caused traffic congestion. Local authority plans to perform the access restriction on freight vehicles on the Jakarta Outer Ring Road (JORR) to reduce the congestion on that toll road. The study aims to analyze the alternative solutions of the logistics companies to overcome the impact of such policy. The data collection is done by interviewing 102 truck drivers and 7 staffs of logistic companies that use JORR. The results show that the most preferred action is shifting the operating time. Based on the open test, access restriction policy on JORR may cause a significant impact on the operational costs of delivery. Shifting the operational time will increase the operating cost by 1.71%, while turning the route will increase the operating costs by 4.35%. Moreover, changing the mode will reduce the operating expenses by 50%, and the combination action of shifting the route and the time will increase the operating costs by 5.39%.

Hybrid Airships: Intratheater Operations Cost-Benefit Analysis

DTIC Science & Technology

2011-06-01

airships (HA) in an intratheater humanitarian assistance scenario. A linear programming model was used to study various mixes of hybrid airships...i.e. 200 tons) must be moved as quickly as possible (or during sealift transit), then HA operating costs of $3,000 per hour or less also make them a ...for Future Research ................................................................................ 52 Appendix A : Examples of HA Concepts/Prototypes

On the Economics of Library Operation. Final Report Submitted to National Advisory Commission on Libraries.

ERIC Educational Resources Information Center

National Advisory Commission on Libraries, Washington, DC.

Both an analysis of the sources of cost trends in libraries and the relationship of the prospective role of automation in library operations to the causes of cost trends and the predicted shortage of trained librarians are examined in the study of the economic structure of the library. Issues investigated are those particularly relating to current…

In Situ Soil Venting - Full Scale Test, Hill AFB. Volume 3. Guidance Document, Literature Review

DTIC Science & Technology

1991-08-01

s ý GCE Form A•pproved REPORT DOCUMENTATION PAGE CMBNO 070401’ihs a EERORT C ,RI Y C•.ASSFCA ,ON ’t .• ESTR !CTiVE MARKINGS .a SECURT’Y CLASSiFICAT... labor -intensive, operating costs are relatively low. Major operating costs are sampling, sample analysis, power, maintenance, and emissions control

Cost-effectiveness of the stream-gaging program in New Jersey

USGS Publications Warehouse

Schopp, R.D.; Ulery, R.L.

1984-01-01

The results of a study of the cost-effectiveness of the stream-gaging program in New Jersey are documented. This study is part of a 5-year nationwide analysis undertaken by the U.S. Geological Survey to define and document the most cost-effective means of furnishing streamflow information. This report identifies the principal uses of the data and relates those uses to funding sources, applies, at selected stations, alternative less costly methods (that is flow routing, regression analysis) for furnishing the data, and defines a strategy for operating the program which minimizes uncertainty in the streamflow data for specific operating budgets. Uncertainty in streamflow data is primarily a function of the percentage of missing record and the frequency of discharge measurements. In this report, 101 continuous stream gages and 73 crest-stage or stage-only gages are analyzed. A minimum budget of $548,000 is required to operate the present stream-gaging program in New Jersey with an average standard error of 27.6 percent. The maximum budget analyzed was $650,000, which resulted in an average standard error of 17.8 percent. The 1983 budget of $569,000 resulted in a standard error of 24.9 percent under present operating policy. (USGS)

Cost-effectiveness Analysis for Technology Acquisition.

PubMed

Chakravarty, A; Naware, S S

2008-01-01

In a developing country with limited resources, it is important to utilize the total cost visibility approach over the entire life-cycle of the technology and then analyse alternative options for acquiring technology. The present study analysed cost-effectiveness of an "In-house" magnetic resonance imaging (MRI) scan facility of a large service hospital against outsourcing possibilities. Cost per unit scan was calculated by operating costing method and break-even volume was calculated. Then life-cycle cost analysis was performed to enable total cost visibility of the MRI scan in both "In-house" and "outsourcing of facility" configuration. Finally, cost-effectiveness analysis was performed to identify the more acceptable decision option. Total cost for performing unit MRI scan was found to be Rs 3,875 for scans without contrast and Rs 4,129 with contrast. On life-cycle cost analysis, net present value (NPV) of the "In-house" configuration was found to be Rs-(4,09,06,265) while that of "outsourcing of facility" configuration was Rs-(5,70,23,315). Subsequently, cost-effectiveness analysis across eight Figures of Merit showed the "In-house" facility to be the more acceptable option for the system. Every decision for acquiring high-end technology must be subjected to life-cycle cost analysis.

Integrating Solar PV in Utility System Operations: Analytical Framework and Arizona Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Jing; Botterud, Audun; Mills, Andrew

2015-06-01

A systematic framework is proposed to estimate the impact on operating costs due to uncertainty and variability in renewable resources. The framework quantifies the integration costs associated with subhourly variability and uncertainty as well as day-ahead forecasting errors in solar PV (photovoltaics) power. A case study illustrates how changes in system operations may affect these costs for a utility in the southwestern United States (Arizona Public Service Company). We conduct an extensive sensitivity analysis under different assumptions about balancing reserves, system flexibility, fuel prices, and forecasting errors. We find that high solar PV penetrations may lead to operational challenges, particularlymore » during low-load and high solar periods. Increased system flexibility is essential for minimizing integration costs and maintaining reliability. In a set of sensitivity cases where such flexibility is provided, in part, by flexible operations of nuclear power plants, the estimated integration costs vary between $1.0 and $4.4/MWh-PV for a PV penetration level of 17%. The integration costs are primarily due to higher needs for hour-ahead balancing reserves to address the increased sub-hourly variability and uncertainty in the PV resource. (C) 2015 Elsevier Ltd. All rights reserved.« less

Cost related sensitivity analysis for optimal operation of a grid-parallel PEM fuel cell power plant

NASA Astrophysics Data System (ADS)

El-Sharkh, M. Y.; Tanrioven, M.; Rahman, A.; Alam, M. S.

Fuel cell power plants (FCPP) as a combined source of heat, power and hydrogen (CHP&H) can be considered as a potential option to supply both thermal and electrical loads. Hydrogen produced from the FCPP can be stored for future use of the FCPP or can be sold for profit. In such a system, tariff rates for purchasing or selling electricity, the fuel cost for the FCPP/thermal load, and hydrogen selling price are the main factors that affect the operational strategy. This paper presents a hybrid evolutionary programming and Hill-Climbing based approach to evaluate the impact of change of the above mentioned cost parameters on the optimal operational strategy of the FCPP. The optimal operational strategy of the FCPP for different tariffs is achieved through the estimation of the following: hourly generated power, the amount of thermal power recovered, power trade with the local grid, and the quantity of hydrogen that can be produced. Results show the importance of optimizing system cost parameters in order to minimize overall operating cost.

Fishing decisions under uncertainty

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, C.G.

1982-02-01

The drilling manager often is forced by an extended fishing operation to choose between the known costs incurred with abandonment of retrieval attempts and the unknown costs of continuing fishing operations. The successful manager makes the decision that costs the company the least money. Continuing fishing operations beyond some economic limit is failure, even if the fish is retrieved and that portion of the hole saved, because more money has been spent in the fishing attempt than would have been spent by not fishing. The strategy is to minimize losses. This analysis closely follows the theory of utility developed bymore » J. von Neuman and O. Morgenstern. 1 ref.« less

Manned geosynchronous mission requirements and systems analysis study extension

NASA Technical Reports Server (NTRS)

1981-01-01

Turnaround requirements for the manned orbital transfer vehicle (MOTV) baseline and alternate concepts with and without a space operations center (SOC) are defined. Manned orbital transfer vehicle maintenance, refurbishment, resupply, and refueling are considered as well as the most effective combination of ground based and space based turnaround activities. Ground and flight operations requirements for abort are identified as well as low cost approaches to space and ground operations through maintenance and missions sensitivity studies. The recommended turnaround mix shows that space basing MOTV at SOC with periodic return to ground for overhaul results in minimum recurring costs. A pressurized hangar at SOC reduces labor costs by approximately 50%.

Estimating the Cost of Neurosurgical Procedures in a Low-Income Setting: An Observational Economic Analysis.

PubMed

Abdelgadir, Jihad; Tran, Tu; Muhindo, Alex; Obiga, Doomwin; Mukasa, John; Ssenyonjo, Hussein; Muhumza, Michael; Kiryabwire, Joel; Haglund, Michael M; Sloan, Frank A

2017-05-01

There are no data on cost of neurosurgery in low-income and middle-income countries. The objective of this study was to estimate the cost of neurosurgical procedures in a low-resource setting to better inform resource allocation and health sector planning. In this observational economic analysis, microcosting was used to estimate the direct and indirect costs of neurosurgical procedures at Mulago National Referral Hospital (Kampala, Uganda). During the study period, October 2014 to September 2015, 1440 charts were reviewed. Of these patients, 434 had surgery, whereas the other 1006 were treated nonsurgically. Thirteen types of procedures were performed at the hospital. The estimated mean cost of a neurosurgical procedure was $542.14 (standard deviation [SD], $253.62). The mean cost of different procedures ranged from $291 (SD, $101) for burr hole evacuations to $1,221 (SD, $473) for excision of brain tumors. For most surgeries, overhead costs represented the largest proportion of the total cost (29%-41%). This is the first study using primary data to determine the cost of neurosurgery in a low-resource setting. Operating theater capacity is likely the binding constraint on operative volume, and thus, investing in operating theaters should achieve a higher level of efficiency. Findings from this study could be used by stakeholders and policy makers for resource allocation and to perform economic analyses to establish the value of neurosurgery in achieving global health goals. Copyright © 2017 Elsevier Inc. All rights reserved.

Cost analysis of the development and implementation of a spatial decision support system for malaria elimination in Solomon Islands.

PubMed

Marston, Luke; Kelly, Gerard C; Hale, Erick; Clements, Archie C A; Hodge, Andrew; Jimenez-Soto, Eliana

2014-08-18

The goal of malaria elimination faces numerous challenges. New tools are required to support the scale up of interventions and improve national malaria programme capacity to conduct detailed surveillance. This study investigates the cost factors influencing the development and implementation of a spatial decision support system (SDSS) for malaria elimination in the two elimination provinces of Isabel and Temotu, Solomon Islands. Financial and economic costs to develop and implement a SDSS were estimated using the Solomon Islands programme's financial records. Using an ingredients approach, verified by stakeholders and operational reports, total costs for each province were quantified. A budget impact sensitivity analysis was conducted to investigate the influence of variations in standard budgetary components on the costs and to identify potential cost savings. A total investment of US$ 96,046 (2012 constant dollars) was required to develop and implement the SDSS in two provinces (Temotu Province US$ 49,806 and Isabel Province US$ 46,240). The single largest expense category was for computerized equipment totalling approximately US$ 30,085. Geographical reconnaissance was the most expensive phase of development and implementation, accounting for approximately 62% of total costs. Sensitivity analysis identified different cost factors between the provinces. Reduced equipment costs would deliver a budget saving of approximately 10% in Isabel Province. Combined travel costs represented the greatest influence on the total budget in the more remote Temotu Province. This study provides the first cost analysis of an operational surveillance tool used specifically for malaria elimination in the South-West Pacific. It is demonstrated that the costs of such a decision support system are driven by specialized equipment and travel expenses. Such factors should be closely scrutinized in future programme budgets to ensure maximum efficiencies are gained and available resources are allocated effectively.

Operational experience in underwater photogrammetry

NASA Astrophysics Data System (ADS)

Leatherdale, John D.; John Turner, D.

Underwater photogrammetry has become established as a cost-effective technique for inspection and maintenance of platforms and pipelines for the offshore oil industry. A commercial service based in Scotland operates in the North Sea, USA, Brazil, West Africa and Australia. 70 mm cameras and flash units are built for the purpose and analytical plotters and computer graphics systems are used for photogrammetric measurement and analysis of damage, corrosion, weld failures and redesign of underwater structures. Users are seeking simple, low-cost systems for photogrammetric analysis which their engineers can use themselves.

Extended System Operations Studies for Automated Guideway Transit Systems

DOT National Transportation Integrated Search

1982-02-01

The objectives of the System Operations Studies (SOS) of the Automated Guideway Transit Technology (AGTT) program was to develop models for the analysis of system operations, to evaluate AGT system performance and cost, and to establish guidelines fo...

EVALUATING THE COSTS OF PACKED-TOWER AERATION AND GAC FOR CONTROLLING SELECTED ORGANICS

EPA Science Inventory

This article focuses on a preliminary cost analysis that compares liquid-phase granular activated carbon (GAC) treatment with packed-tower aeration (PTA) treatment, with and without air emissions control. The sensitivity of cost to design and operating variables is also discussed...

Direct Cost Analysis of Outpatient Arthroscopic Rotator Cuff Repair in Medicare and Non-Medicare Populations.

PubMed

Narvy, Steven J; Didinger, Tracey C; Lehoang, David; Vangsness, C Thomas; Tibone, James E; Hatch, George F Rick; Omid, Reza; Osorno, Felipe; Gamradt, Seth C

2016-10-01

Providing high-quality care while also containing cost is a paramount goal in orthopaedic surgery. Increasingly, insurance providers in the United States, including government payers, are requiring financial and performance accountability for episodes of care, including a push toward bundled payments. The direct cost of outpatient arthroscopic rotator cuff repair was assessed to determine whether, due to an older population, rotator cuff surgery was more costly in Medicare-insured patients than in patients covered by other insurers. We hypothesized that operative time, implant cost, and overall higher cost would be observed in Medicare patients. Cohort study; Level of evidence, 3. Billing and operative reports from 184 outpatient arthroscopic rotator cuff repairs performed by 5 fellowship-trained arthroscopic surgeons were reviewed. Operative time, number and cost of implants, hospital reimbursement, surgeon reimbursement, and insurance type were determined from billing records and operative reports. Patients were stratified by payer (Medicare vs non-Medicare), and these variables were compared. There were no statistically significant differences in the number of suture anchors used, implant cost, surgical duration, or overall cost of arthroscopic rotator cuff repair between Medicare and other insurers. Reimbursement was significantly higher for other payers when compared with Medicare, resulting in a mean per case deficit of $263.54 between billing and reimbursement for Medicare patients. Operating room time, implant cost, and total procedural cost was the same for Medicare patients as for patients with private payers. Further research needs to be conducted to understand the patient-specific factors that affect the cost of an episode of care for rotator cuff surgery.

Cost-benefit analysis of different air change rates in an operating room environment.

PubMed

Gormley, Thomas; Markel, Troy A; Jones, Howard; Greeley, Damon; Ostojic, John; Clarke, James H; Abkowitz, Mark; Wagner, Jennifer

2017-12-01

Hospitals face growing pressure to meet the dual but often competing goals of providing a safe environment while controlling operating costs. Evidence-based data are needed to provide insight for facility management practices to support these goals. The quality of the air in 3 operating rooms was measured at different ventilation rates. The energy cost to provide the heating, ventilation, and air conditioning to the rooms was estimated to provide a cost-benefit comparison of the effectiveness of different ventilation rates currently used in the health care industry. Simply increasing air change rates in the operating rooms tested did not necessarily provide an overall cleaner environment, but did substantially increase energy consumption and costs. Additionally, and unexpectedly, significant differences in microbial load and air velocity were detected between the sterile fields and back instrument tables. Increasing the ventilation rates in operating rooms in an effort to improve clinical outcomes and potentially reduce surgical site infections does not necessarily provide cleaner air, but does typically increase operating costs. Efficient distribution or management of the air can improve quality indicators and potentially reduce the number of air changes required. Measurable environmental quality indicators could be used in lieu of or in addition to air change rate requirements to optimize cost and quality for an operating room and other critical environments. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Cost-effectiveness analysis of repeat fine-needle aspiration for thyroid biopsies read as atypia of undetermined significance.

PubMed

Heller, Michael; Zanocco, Kyle; Zydowicz, Sara; Elaraj, Dina; Nayar, Ritu; Sturgeon, Cord

2012-09-01

The 2007 National Cancer Institute (NCI) conference on Thyroid Fine-Needle Aspiration (FNA) introduced the category atypia of undetermined significance (AUS) or follicular lesion of undetermined significance (FLUS). Repeat FNA in 3 to 6 months was recommended for low-risk patients. Compliance with these recommendations has been suboptimal. We hypothesized that repeat FNA would be more effective than diagnostic lobectomy, with decreased costs and improved rates of cancer detection. Cost-effectiveness analysis was performed in which we compared diagnostic lobectomy with repeat FNA. A Markov model was developed. Outcomes and probabilities were identified from literature review. Third-party payer costs were estimated in 2010 US dollars. Outcomes were weighted by use of the quality-of-life utility factors, yielding quality-adjusted life years (QALYs). Monte Carlo simulation and sensitivity analysis were used to examine the uncertainty of probability, cost, and utility estimates. The diagnostic lobectomy strategy cost $8,057 and produced 23.99 QALYs. Repeat FNA cost $2,462 and produced 24.05 QALYs. Repeat FNA was dominant until the cost of FNA increased to $6,091. Dominance of the repeat FNA strategy was not sensitive to the cost of operation or the complication rate. The NCI recommendations for repeat FNA regarding follow-up of AUS/FLUS results are cost-effective. Improving compliance with these guidelines should lead to less overall costs, greater quality of life, and fewer unnecessary operations. Copyright © 2012 Mosby, Inc. All rights reserved.

Cost Study of Educational Media Systems and Their Equipment Components. Volume II, Technical Report. Final Report.

ERIC Educational Resources Information Center

General Learning Corp., Washington, DC.

A common instructional task and a set of educational environments are hypothesized for analysis of media cost data. The analytic structure may be conceptulized as a three-dimensional matrix: the first vector separates costs into production, distribution, and reception; the second vector delineates capital (initial) and operating (annual) costs;…

An assessment of the economic aspects of CO2 sequestration in a route for biodiesel production from microalgae.

PubMed

Soares, Fabio Rubens; Martins, Gilberto; Seo, Emília Satoshi Miyamaru

2013-01-01

Photosynthetic microalgae are unicellular organisms that, during their cultivation, can fix carbon dioxide efficiently from various sources, including the air and exhaust gases from industrial processes. This feature can lead to economic benefits in the production process of biodiesel by way of the clean development mechanism, for which carbon credits for environmental benefits may be granted and which will contribute towards reducing costs in the production process. This study seeks to quantify the contribution of carbon credits in the operating costs of a route for biodiesel production from microalgae, as proposed by Davis et al. [Techno-economic analysis ofautotrophic microalgae for fuel production. Appl Energy. 2011; 88:3524-3531]. The results showed a reduction in annual operating costs by around 5%. This figure may be conservative, since the production process considered can be further improved to reduce operating costs and thus increase the contribution margin of carbon credits, which will reduce costs. On the other hand, the price of carbon may also rise in the future, thereby increasing its contribution towards a reduction in operating costs.

VAR and generalized impulse response analysis of manufacturing unit labor costs

NASA Astrophysics Data System (ADS)

Ewing, Bradley T.; Thompson, Mark A.

2008-04-01

This paper examines the relationship among manufacturing unit labor costs in the United States, United Kingdom, and Canada. The analysis is conducted within the context of an economic system utilizing the recently developed method of generalized impulse response analysis to simulate the responses of the cost series to disturbances. The results indicate that, while unit labor costs do not share a common stochastic trend, there are significant responses in the unit labor costs of each country to shocks in the costs of other countries that are not captured by standard interpretation of the multiple-equation model results. The findings indicate the presence of significant linkages among unit labor costs in the countries studied. The results are consistent with the economic environment of manufacturing operations being characterized by a competitive, integrated marketplace.

Integrating Efficiency of Industry Processes and Practices Alongside Technology Effectiveness in Space Transportation Cost Modeling and Analysis

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2012-01-01

This paper presents past and current work in dealing with indirect industry and NASA costs when providing cost estimation or analysis for NASA projects and programs. Indirect costs, when defined as those costs in a project removed from the actual hardware or software hands-on labor; makes up most of the costs of today's complex large scale NASA space/industry projects. This appears to be the case across phases from research into development into production and into the operation of the system. Space transportation is the case of interest here. Modeling and cost estimation as a process rather than a product will be emphasized. Analysis as a series of belief systems in play among decision makers and decision factors will also be emphasized to provide context.

Optimizing water purchases for an Environmental Water Account

NASA Astrophysics Data System (ADS)

Lund, J. R.; Hollinshead, S. P.

2005-12-01

State and federal agencies in California have established an Environmental Water Account (EWA) to buy water to protect endangered fish in the San Francisco Bay/ Sacramento-San Joaquin Delta Estuary. This paper presents a three-stage probabilistic optimization model that identifies least-cost strategies for purchasing water for the EWA given hydrologic, operational, and biological uncertainties. This approach minimizes the expected cost of long-term, spot, and option water purchases to meet uncertain flow dedications for fish. The model prescribes the location, timing, and type of optimal water purchases and can illustrate how least-cost strategies change with hydrologic, operational, biological, and cost inputs. Details of the optimization model's application to California's EWA are provided with a discussion of its utility for strategic planning and policy purposes. Limitations in and sensitivity analysis of the model's representation of EWA operations are discussed, as are operational and research recommendations.

Spinal Surgeon Variation in Single-Level Cervical Fusion Procedures: A Cost and Hospital Resource Utilization Analysis.

PubMed

Hijji, Fady Y; Massel, Dustin H; Mayo, Benjamin C; Narain, Ankur S; Long, William W; Modi, Krishna D; Burke, Rory M; Canar, Jeff; Singh, Kern

2017-07-01

Retrospective analysis. To compare perioperative costs and outcomes of patients undergoing single-level anterior cervical discectomy and fusions (ACDF) at both a service (orthopedic vs. neurosurgical) and individual surgeon level. Hospital systems are experiencing significant pressure to increase value of care by reducing costs while maintaining or improving patient-centered outcomes. Few studies have examined the cost-effectiveness cervical arthrodesis at a service level. A retrospective review of patients who underwent a primary 1-level ACDF by eight surgeons (four orthopedic and four neurosurgical) at a single academic institution between 2013 and 2015 was performed. Patients were identified by Diagnosis-Related Group and procedural codes. Patients with the ninth revision of the International Classification of Diseases coding for degenerative cervical pathology were included. Patients were excluded if they exhibited preoperative diagnoses or postoperative social work issues affecting their length of stay. Comparisons of preoperative demographics were performed using Student t tests and chi-squared analysis. Perioperative outcomes and costs for hospital services were compared using multivariate regression adjusted for preoperative characteristics. A total of 137 patients diagnosed with cervical degeneration underwent single-level ACDF; 44 and 93 were performed by orthopedic surgeons and neurosurgeons, respectively. There was no difference in patient demographics. ACDF procedures performed by orthopedic surgeons demonstrated shorter operative times (89.1 ± 25.5 vs. 96.0 ± 25.5 min; P = 0.002) and higher laboratory costs (Δ+$6.53 ± $5.52 USD; P = 0.041). There were significant differences in operative time (P = 0.014) and labor costs (P = 0.034) between individual surgeons. There was no difference in total costs between specialties or individual surgeons. Surgical subspecialty training does not significantly affect total costs of ACDF procedures. Costs can, however, vary between individual surgeons based on operative times. Variation between individual surgeons highlights potential areas for improvement of the cost effectiveness of spinal procedures. 4.

Is FDG PET/CT cost-effective for pre-operation staging of potentially operative non-small cell lung cancer? - From Chinese healthcare system perspective.

PubMed

Wang, Yu-ting; Huang, Gang

2012-08-01

The remarkable morbidity and mortality of lung cancer in the large population address major economic challenges to Chinese healthcare system. This study aims to assess the cost-effectiveness of fluorodeoxyglucose positron emission tomography (FDG PET)/CT for staging patients with non-small cell lung cancer (NSCLC) in China. Management of potentially operative NSCLC was modeled on decision analysis employing data in China. The strategies compared were conventional CT staging (strategy A), additional PET/CT in all patients (strategy B) or only in patients with normal-sized lymph nodes on CT (strategy C). Published medical data for Chinese patients was extracted. The costs corresponded to reimbursement by Chinese public health provider in 2010. Uncertainly of employed parameters was calculated in sensitivity analysis. Taking strategy A as baseline, the incremental cost-effectiveness ratio (ICER) of strategy B was 23,800RMB ($3500) per life year saved, which was acceptable in views of a developing country as China; while strategy C exhibited some loss of life years. Sensitivity analysis suggested the ICER (B-A) was raised more remarkably by a deterioration of PET specificity than by that of its sensitivity. The ICER was turned negative by PET specificity lower than 0.79. Economically, PET cost was proportional to the ICER (B-A), and decrease of palliative therapy cost could reduce both the ICER and overall cost. The PET/CT strategy is potentially cost-effective for management of NSCLC in China. Patients with nodal-positive CT results are not suggested to be excluded from further PET/CT. Furthermore, maintaining high specificity of PET in clinical scenarios is crucial. Prospective trials are warranted to transfer these results into policy making. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

An application of multiattribute decision analysis to the Space Station Freedom program. Case study: Automation and robotics technology evaluation

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Levin, Richard R.; Carpenter, Elisabeth J.

1990-01-01

The results are described of an application of multiattribute analysis to the evaluation of high leverage prototyping technologies in the automation and robotics (A and R) areas that might contribute to the Space Station (SS) Freedom baseline design. An implication is that high leverage prototyping is beneficial to the SS Freedom Program as a means for transferring technology from the advanced development program to the baseline program. The process also highlights the tradeoffs to be made between subsidizing high value, low risk technology development versus high value, high risk technology developments. Twenty one A and R Technology tasks spanning a diverse array of technical concepts were evaluated using multiattribute decision analysis. Because of large uncertainties associated with characterizing the technologies, the methodology was modified to incorporate uncertainty. Eight attributes affected the rankings: initial cost, operation cost, crew productivity, safety, resource requirements, growth potential, and spinoff potential. The four attributes of initial cost, operations cost, crew productivity, and safety affected the rankings the most.

Hospital costs of complications after a pancreatoduodenectomy

PubMed Central

Santema, Trientje B; Visser, Annelies; Busch, Olivier R C; Dijkgraaf, Marcel G W; Goslings, J Carel; Gouma, D J; Ubbink, Dirk T

2015-01-01

Background A pancreatoduodenectomy (PD) is a highly advanced procedure associated with considerable post-operative complications and substantial costs. In this study the hospital costs associated with complications after PD were assessed. Methods A retrospective cohort study was conducted on 100 consecutive patients who underwent a pylorus-preserving (PP)PD between January 2012 and July 2013. Per patient, all complications occurring during admission or in the 30-day period after discharge were documented. All hospital costs related to the (PP)PD were defined as the costs of all medical interventions and resources during the hospitalisation period as recorded by the electronic supply tracking system. Results The median hospital costs ranged from €17 482 for a patient without complications to €55 623 for a patient with a post-operative haemorrhage. A post-operative haemorrhage was associated with a 39.6% increase in total hospital costs after adjusting for patient characteristics. Other factors significantly associated with an increase in total hospital costs were: the presence of a malignancy other than a pancreatic adenocarcinoma (29.4% cost increase), the severity grade of a complication (34.3–70.6% increase) and the presence of a post-operative infection (32.4% increase). Conclusions This study provides an in-depth analysis of hospital costs and identifies factors that are associated with substantial cost consequences of specific complications occurring after a PD. PMID:26082095

A Cost-Effectiveness Analysis of the Swedish Universal Parenting Program All Children in Focus.

PubMed

Ulfsdotter, Malin; Lindberg, Lene; Månsdotter, Anna

2015-01-01

There are few health economic evaluations of parenting programs with quality-adjusted life-years (QALYs) as the outcome measure. The objective of this study was, therefore, to conduct a cost-effectiveness analysis of the universal parenting program All Children in Focus (ABC). The goals were to estimate the costs of program implementation, investigate the health effects of the program, and examine its cost-effectiveness. A cost-effectiveness analysis was conducted. Costs included setup costs and operating costs. A parent proxy Visual Analog Scale was used to measure QALYs in children, whereas the General Health Questionnaire-12 was used for parents. A societal perspective was adopted, and the incremental cost-effectiveness ratio was calculated. To account for uncertainty in the estimate, the probability of cost-effectiveness was investigated, and sensitivity analyses were used to account for the uncertainty in cost data. The cost was € 326.3 per parent, of which € 53.7 represented setup costs under the assumption that group leaders on average run 10 groups, and € 272.6 was the operating costs. For health effects, the QALY gain was 0.0042 per child and 0.0027 per parent. These gains resulted in an incremental cost-effectiveness ratio for the base case of € 47 290 per gained QALY. The sensitivity analyses resulted in ratios from € 41 739 to € 55 072. With the common Swedish threshold value of € 55 000 per QALY, the probability of the ABC program being cost-effective was 50.8 percent. Our analysis of the ABC program demonstrates cost-effectiveness ratios below or just above the QALY threshold in Sweden. However, due to great uncertainty about the data, the health economic rationale for implementation should be further studied considering a longer time perspective, effects on siblings, and validated measuring techniques, before full scale implementation.

A Cost-Effectiveness Analysis of the Swedish Universal Parenting Program All Children in Focus

PubMed Central

Ulfsdotter, Malin

2015-01-01

Objective There are few health economic evaluations of parenting programs with quality-adjusted life-years (QALYs) as the outcome measure. The objective of this study was, therefore, to conduct a cost-effectiveness analysis of the universal parenting program All Children in Focus (ABC). The goals were to estimate the costs of program implementation, investigate the health effects of the program, and examine its cost-effectiveness. Methods A cost-effectiveness analysis was conducted. Costs included setup costs and operating costs. A parent proxy Visual Analog Scale was used to measure QALYs in children, whereas the General Health Questionnaire-12 was used for parents. A societal perspective was adopted, and the incremental cost-effectiveness ratio was calculated. To account for uncertainty in the estimate, the probability of cost-effectiveness was investigated, and sensitivity analyses were used to account for the uncertainty in cost data. Results The cost was €326.3 per parent, of which €53.7 represented setup costs under the assumption that group leaders on average run 10 groups, and €272.6 was the operating costs. For health effects, the QALY gain was 0.0042 per child and 0.0027 per parent. These gains resulted in an incremental cost-effectiveness ratio for the base case of €47 290 per gained QALY. The sensitivity analyses resulted in ratios from €41 739 to €55 072. With the common Swedish threshold value of €55 000 per QALY, the probability of the ABC program being cost-effective was 50.8 percent. Conclusion Our analysis of the ABC program demonstrates cost-effectiveness ratios below or just above the QALY threshold in Sweden. However, due to great uncertainty about the data, the health economic rationale for implementation should be further studied considering a longer time perspective, effects on siblings, and validated measuring techniques, before full scale implementation. PMID:26681349

Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

DOE PAGES

Ren, Lantian; Cafferty, Kara; Roni, Mohammad; ...

2015-06-11

This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum in China under different scenarios. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study estimates that the logistics cost of corn stover and sweet sorghum stalk to be $52.95/dry metric ton and $52.64/dry metric ton, respectively,more » for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk decreases to $36.01/dry metric ton and $35.76/dry metric ton, respectively. The study also includes a sensitivity analysis to identify the cost factors that cause logistics cost variation. Results of the sensitivity analysis show that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, with a variation of $6 to $12/dry metric ton.« less

Warranty optimisation based on the prediction of costs to the manufacturer using neural network model and Monte Carlo simulation

NASA Astrophysics Data System (ADS)

Stamenkovic, Dragan D.; Popovic, Vladimir M.

2015-02-01

Warranty is a powerful marketing tool, but it always involves additional costs to the manufacturer. In order to reduce these costs and make use of warranty's marketing potential, the manufacturer needs to master the techniques for warranty cost prediction according to the reliability characteristics of the product. In this paper a combination free replacement and pro rata warranty policy is analysed as warranty model for one type of light bulbs. Since operating conditions have a great impact on product reliability, they need to be considered in such analysis. A neural network model is used to predict light bulb reliability characteristics based on the data from the tests of light bulbs in various operating conditions. Compared with a linear regression model used in the literature for similar tasks, the neural network model proved to be a more accurate method for such prediction. Reliability parameters obtained in this way are later used in Monte Carlo simulation for the prediction of times to failure needed for warranty cost calculation. The results of the analysis make possible for the manufacturer to choose the optimal warranty policy based on expected product operating conditions. In such a way, the manufacturer can lower the costs and increase the profit.

Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Lantian; Cafferty, Kara; Roni, Mohammad

This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum in China under different scenarios. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study estimates that the logistics cost of corn stover and sweet sorghum stalk to be $52.95/dry metric ton and $52.64/dry metric ton, respectively,more » for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk decreases to $36.01/dry metric ton and $35.76/dry metric ton, respectively. The study also includes a sensitivity analysis to identify the cost factors that cause logistics cost variation. Results of the sensitivity analysis show that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, with a variation of $6 to $12/dry metric ton.« less

Reduced length of stay in hospital for burn patients following a change in practice guidelines: financial implications.

PubMed

Jansen, Leigh A; Hynes, Sally L; Macadam, Sheina A; Papp, Anthony

2012-01-01

The objective of this study was to analyze the financial implications of the implementation of new institutional practice guidelines including greater outpatient care and earlier operative intervention in a provincial burn center. A retrospective review was performed including all patients admitted to the Burn Unit with burns up to 20% TBSA between August 2005 and July 2009, including 2 years before and after the new guidelines were introduced. Daily costs for the burn unit were used to calculate this portion of cost. Length of stay (LOS) was based on actual data and representative clinical scenarios. Two hundred sixty-four patients were included. Mean LOS decreased from 10.3 to 3.9 (P < .01) and 21.0 to 13.3 (P > .05) for nonoperative burns 0 to 10% and 10 to 20% TBSA, respectively. Mean LOS for operative burns decreased from 16.6 to 12.9 and 32.3 to 29.8 days for 0 to 10% and 10 to 20% TBSA, respectively (P > .05). Burn patient management requires significant financial resources, and LOS has a large impact on cost. Given per diem rates of Can$1,663, scenario analysis shows potential cost savings of Can$19,956 per patient for operative and nonoperative burns <20% TBSA. With an average of 66 such patients treated each year, potential annual cost savings are Can$1.3 million. If outcomes are not compromised, earlier operative management and greater outpatient care can translate into significant cost savings. A prospective analysis capturing all costs and patient quality of life is required for further assessment.

IUS/TUG orbital operations and mission support study. Volume 3: Space tug operations

NASA Technical Reports Server (NTRS)

1975-01-01

A study was conducted to develop space tug operational concepts and baseline operations plan, and to provide cost estimates for space tug operations. Background data and study results are presented along with a transition phase analysis (the transition from interim upper state to tug operations). A summary is given of the tug operational and interface requirements with emphasis on the on-orbit checkout requirements, external interface operational requirements, safety requirements, and system operational interface requirements. Other topics discussed include reference missions baselined for the tug and details for the mission functional flows and timelines derived for the tug mission, tug subsystems, tug on-orbit operations prior to the tug first burn, spacecraft deployment and retrieval by the tug, operations centers, mission planning, potential problem areas, and cost data.

Discovery and New Frontiers Project Budget Analysis Tool

NASA Technical Reports Server (NTRS)

Newhouse, Marilyn E.

2011-01-01

The Discovery and New Frontiers (D&NF) programs are multi-project, uncoupled programs that currently comprise 13 missions in phases A through F. The ability to fly frequent science missions to explore the solar system is the primary measure of program success. The program office uses a Budget Analysis Tool to perform "what-if" analyses and compare mission scenarios to the current program budget, and rapidly forecast the programs ability to meet their launch rate requirements. The tool allows the user to specify the total mission cost (fixed year), mission development and operations profile by phase (percent total mission cost and duration), launch vehicle, and launch date for multiple missions. The tool automatically applies inflation and rolls up the total program costs (in real year dollars) for comparison against available program budget. Thus, the tool allows the user to rapidly and easily explore a variety of launch rates and analyze the effect of changes in future mission or launch vehicle costs, the differing development profiles or operational durations of a future mission, or a replan of a current mission on the overall program budget. Because the tool also reports average monthly costs for the specified mission profile, the development or operations cost profile can easily be validate against program experience for similar missions. While specifically designed for predicting overall program budgets for programs that develop and operate multiple missions concurrently, the basic concept of the tool (rolling up multiple, independently-budget lines) could easily be adapted to other applications.

Analysis of Anterior Cervical Discectomy and Fusion Healthcare Costs via the Value-Driven Outcomes Tool.

PubMed

Reese, Jared C; Karsy, Michael; Twitchell, Spencer; Bisson, Erica F

2018-04-11

Examining the costs of single- and multilevel anterior cervical discectomy and fusion (ACDF) is important for the identification of cost drivers and potentially reducing patient costs. A novel tool at our institution provides direct costs for the identification of potential drivers. To assess perioperative healthcare costs for patients undergoing an ACDF. Patients who underwent an elective ACDF between July 2011 and January 2017 were identified retrospectively. Factors adding to total cost were placed into subcategories to identify the most significant contributors, and potential drivers of total cost were evaluated using a multivariable linear regression model. A total of 465 patients (mean, age 53 ± 12 yr, 54% male) met the inclusion criteria for this study. The distribution of total cost was broken down into supplies/implants (39%), facility utilization (37%), physician fees (14%), pharmacy (7%), imaging (2%), and laboratory studies (1%). A multivariable linear regression analysis showed that total cost was significantly affected by the number of levels operated on, operating room time, and length of stay. Costs also showed a narrow distribution with few outliers and did not vary significantly over time. These results suggest that facility utilization and supplies/implants are the predominant cost contributors, accounting for 76% of the total cost of ACDF procedures. Efforts at lowering costs within these categories should make the most impact on providing more cost-effective care.

Modeling Imperfect Generator Behavior in Power System Operation Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krad, Ibrahim

A key component in power system operations is the use of computer models to quickly study and analyze different operating conditions and futures in an efficient manner. The output of these models are sensitive to the data used in them as well as the assumptions made during their execution. One typical assumption is that generators and load assets perfectly follow operator control signals. While this is a valid simulation assumption, generators may not always accurately follow control signals. This imperfect response of generators could impact cost and reliability metrics. This paper proposes a generator model that capture this imperfect behaviormore » and examines its impact on production costs and reliability metrics using a steady-state power system operations model. Preliminary analysis shows that while costs remain relatively unchanged, there could be significant impacts on reliability metrics.« less

Cost comparison and safety of emergency department conscious sedation for the removal of ear foreign bodies.

PubMed

Olson, Michael D; Saw, Jessica; Visscher, Sue L; Balakrishnan, Karthik

2018-07-01

The purpose of this study is to investigate the relative cost and safety of ear foreign body (FB) removal via conscious sedation in the emergency department. A retrospective review of patients presenting from 2000 to 2015 to the emergency department at Mayo Clinic, Rochester, Minnesota was performed. 63 patients requiring sedation for ear foreign body removal were identified. Descriptive data, safety data, and costs were obtained for the study. There were no appreciable differences in patient safety outcomes and otologic outcomes in patients who received sedation in the emergency department or anesthesia in the operating room for FB removal. Cost analysis demonstrated increased cost associated with operating room utilization verses conscious sedation in the emergency department, with the greatest cost increase being in patients evaluated first in the emergency department and then sent to the operating room. Ear foreign body removal in the emergency department is shows a similar safety profile to removal in the operating room, but at a markedly lower cost. Emergency department conscious sedation should be considered a viable option in appropriately selected patients with this common problem given these results. Copyright © 2018. Published by Elsevier B.V.

Autonomy versus Affirmative Action: What Price Social Justice?

ERIC Educational Resources Information Center

Cavalier, Anne; Slaughter, Sheila

1982-01-01

A study measured costs of an affirmative action/equal employment opportunity program at one institution through cost analysis of personnel, operating expenses, and capital replacement value. Costs incurred in one budget cycle were 0.4 percent of the total institutional budget, most spent indirectly through faculty time, and were found…

Airport costs and production technology : a translog cost function analysis with implications for economic development.

DOT National Transportation Integrated Search

2011-07-01

Based upon 50 large and medium hub airports over a 13 year period, this research estimates one and two : output translog models of airport short run operating costs. Output is passengers transported on non-stop : segments and pounds of cargo shipped....

Battery Second Use for Plug-In Electric Vehicles Analysis | Transportation

Science.gov Websites

batteries, and how much will it cost? NREL's investigation found that regional repurposing facilities . As technician labor is the primary cost element of such an operation, repurposing facilities are /kilowatt-hour (kWh)-nameplate. NREL's repurposing cost calculator is available freely for download

Airport costs and production technology : a translog cost function analysis with implications for economic development.

DOT National Transportation Integrated Search

2011-12-01

Based upon 50 large and medium hub airports over a 13 year period, this research estimates one and two : output translog models of airport short run operating costs. Output is passengers transported on non-stop : segments and pounds of cargo shipped....

Using decision analysis to assess comparative clinical efficacy of surgical treatment of unstable ankle fractures.

PubMed

Michelson, James D

2013-11-01

The development of a robust treatment algorithm for ankle fractures based on well-established stability criteria has been shown to be prognostic with respect to treatment and outcomes. In parallel with the development of improved understanding of the biomechanical rationale of ankle fracture treatment has been an increased emphasis on assessing the effectiveness of medical and surgical interventions. The purpose of this study was to investigate the use of using decision analysis in the assessment of the cost effectiveness of operative treatment of ankle fractures based on the existing clinical data in the literature. Using the data obtained from a previous structured review of the ankle fracture literature, decision analysis trees were constructed using standard software. The decision nodes for the trees were based on ankle fracture stability criteria previously published. The outcomes were assessed by calculated Quality-Adjusted Life Years (QALYs) assigned to achieving normal ankle function, developing posttraumatic arthritis, or sustaining a postoperative infection. Sensitivity analysis was undertaken by varying the patient's age, incidence of arthritis, and incidence or infection. Decision analysis trees captured the essential aspects of clinical decision making in ankle fracture treatment in a clinically useful manner. In general, stable fractures yielded better outcomes with nonoperative treatment, whereas unstable fractures had better outcomes with surgery. These were consistent results over a wide range of postoperative infection rates. Varying the age of the patient did not qualitatively change the results. Between the ages of 30 and 80 years, surgery yielded higher expected QALYs than nonoperative care for unstable fractures, and generated lower QALYs than nonoperative care for stable fractures. Using local cost estimates for operative and nonoperative treatment, the incremental cost of surgery for unstable fractures was less than $40,000 per QALY (the usual cutoff for the determination of cost effectiveness) for patients aged up to 90 years. Decision analysis is a useful methodology in developing treatment guidelines. Numerous previous studies have indicated superior clinical outcomes when unstable ankle fractures underwent operative reduction and stabilization. What has been lacking was an examination of the cost effectiveness of such an approach, particularly in older patients who have fewer expected years of life. In light of the evidence for satisfactory outcomes for surgery of severe ankle fractures in older people, the justification for operative intervention is an obvious question that can be asked in the current increasingly cost-conscious environment. Using a decision-tree decision analysis structured around the stability-based ankle fracture classification system, in conjunction with a relatively simple cost effectiveness analysis, this study was able to demonstrate that surgical treatment of unstable ankle fractures in elderly patients is in fact cost effective. The clinical implication of the present analysis is that these existing treatment protocols for ankle fracture treatment are also cost effective when quality of life outcome measures are taken into account. Economic Level II. See Instructions for Authors for a complete description of levels of evidence.

EU demonstration project for separate discharge and treatment of urine, faeces and greywater--part II: cost comparison of different sanitation systems.

PubMed

Oldenburg, M; Peter-Fröhlich, A; Dlabacs, C; Pawlowski, L; Bonhomme, A

2007-01-01

The experience from the EU demonstration project was used for a cost analysis of different sanitation systems with regard to nutrient recycling. The analysis was made for an existing residential area, for which the different sanitation systems have been applied. The cost calculations were made for a lifetime of 50 years. The multiple sewer systems cause higher investment costs, mainly for the installation of the additional facilities; the investment costs for the treatment are lower. The cost analysis did not prove lower costs for the new sanitation concepts in this special case in comparison with the conventional system. Economic benefits are demonstrated for the operation costs. The result will be reinforced by the consideration of an increase of the energy costs. The revenues for the nutrient related products have only a very small impact on the result.

Demonstration Advanced Avionics System (DAAS), Phase 1

NASA Technical Reports Server (NTRS)

Bailey, A. J.; Bailey, D. G.; Gaabo, R. J.; Lahn, T. G.; Larson, J. C.; Peterson, E. M.; Schuck, J. W.; Rodgers, D. L.; Wroblewski, K. A.

1981-01-01

Demonstration advanced anionics system (DAAS) function description, hardware description, operational evaluation, and failure mode and effects analysis (FMEA) are provided. Projected advanced avionics system (PAAS) description, reliability analysis, cost analysis, maintainability analysis, and modularity analysis are discussed.

Performance, Agility and Cost of Cloud Computing Services for NASA GES DISC Giovanni Application

NASA Astrophysics Data System (ADS)

Pham, L.; Chen, A.; Wharton, S.; Winter, E. L.; Lynnes, C.

2013-12-01

The NASA Goddard Earth Science Data and Information Services Center (GES DISC) is investigating the performance, agility and cost of Cloud computing for GES DISC applications. Giovanni (Geospatial Interactive Online Visualization ANd aNalysis Infrastructure), one of the core applications at the GES DISC for online climate-related Earth science data access, subsetting, analysis, visualization, and downloading, was used to evaluate the feasibility and effort of porting an application to the Amazon Cloud Services platform. The performance and the cost of running Giovanni on the Amazon Cloud were compared to similar parameters for the GES DISC local operational system. A Giovanni Time-Series analysis of aerosol absorption optical depth (388nm) from OMI (Ozone Monitoring Instrument)/Aura was selected for these comparisons. All required data were pre-cached in both the Cloud and local system to avoid data transfer delays. The 3-, 6-, 12-, and 24-month data were used for analysis on the Cloud and local system respectively, and the processing times for the analysis were used to evaluate system performance. To investigate application agility, Giovanni was installed and tested on multiple Cloud platforms. The cost of using a Cloud computing platform mainly consists of: computing, storage, data requests, and data transfer in/out. The Cloud computing cost is calculated based on the hourly rate, and the storage cost is calculated based on the rate of Gigabytes per month. Cost for incoming data transfer is free, and for data transfer out, the cost is based on the rate in Gigabytes. The costs for a local server system consist of buying hardware/software, system maintenance/updating, and operating cost. The results showed that the Cloud platform had a 38% better performance and cost 36% less than the local system. This investigation shows the potential of cloud computing to increase system performance and lower the overall cost of system management.

Design and cost analysis for an ammonia-based solar thermochemical cavity absorber

NASA Astrophysics Data System (ADS)

Williams, O. M.

1980-01-01

A design and cost analysis is introduced for a solar thermochemical cavity absorber operated at the focus of a tracking paraboloidal concentrator and based on the ammonia dissociation reaction. The absorber design consists of a catalyst-filled nickel alloy tube wound into a spiral forming the inner cavity wall and shaped to match the incident power density profile to the reactor heat requirements. The reactor tube is welded to a coaxial counterflow heat exchanger. The relationships among the power density profile, the reaction thermodynamics and kinetics, and the heat transfer characteristics are examined in detail and it is shown that an installed cost goal of typically 10 U.S. dollars per square meter of solar collector area can be achieved through use of high activity ammonia dissociation catalyst. The optimum absorber size for a given paraboloidal dish area is calculated for a system pressure of 20 MPa and it is shown that a cost effective absorber suitable for 100,000-hr operation would operate at 90% efficiency at 750 C wall temperature.

Study of selected tether applications in space, phase 3, volume 2

NASA Technical Reports Server (NTRS)

1986-01-01

The results of a Phase 3 study of two Selected Tether Applications in Space (STAIS); deorbit of a Shuttle and launch of an Orbital Transfer Vehicle (OTV), both from the space station using a tether were examined. The study objectives were to: perform a preliminary engineering design, define operational scenarios, develop a common cost model, perform cost benefits analyses, and develop a Work Breakdown Structure (WBS). Key features of the performance analysis were to identify the net increases in effective Shuttle cargo capability if tethers are used to assist in the deorbit of Shuttles and the launching of the OTVs from the space station and to define deployer system designs required to accomplish these tasks. Deployer concepts were designed and discussed. Operational scenarios, including timelines, for both tethered and nontethered Shuttle and OTV operations at the space station were evaluated. A summary discussion of the Selected Tether Applications Cost Model (STACOM) and the results of the cost benefits analysis are presented. Several critical technologies needed to implement tether assisted deployment of payloads are also discussed. Conclusions and recommendations are presented.

Space Operations Center system analysis. Volume 3, book 2: SOC system definition report, revision A

NASA Technical Reports Server (NTRS)

1982-01-01

The Space Operations Center (SOC) orbital space station program operations are described. A work breakdown structure for the general purpose support equipment, construction and transportation support, and resupply and logistics support systems is given. The basis for the design of each element is presented, and a mass estimate for each element supplied. The SOC build-up operation, construction, flight support, and satellite servicing operations are described. Detailed programmatics and cost analysis are presented.

A cost-effectiveness analysis of three components of a syndromic surveillance system for the early warning of epidemics in rural China.

PubMed

Ding, Yan; Sauerborn, Rainer; Xu, Biao; Shaofa, Nie; Yan, Weirong; Diwan, Vinod K; Dong, Hengjin

2015-11-14

Syndromic surveillance systems (SSSs) collect non-specific syndromes in early stages of disease outbreaks. This makes an SSS a promising tool for the early detection of epidemics. An Integrated Surveillance System in rural China (ISSC project), which added an SSS to the existing Chinese surveillance system for the early warning of epidemics, was implemented from April 2012 to March 2014 in Jiangxi and Hubei Provinces. This study aims to measure the costs and effectiveness of the three components of the SSS in the ISSC project. The central measures of the cost-effectiveness analysis of the three components of the syndromic surveillance system were: 1) the costs per reported event, respectively, at the health facilities, the primary schools and the pharmacies; and 2) the operating costs per surveillance unit per year, respectively, at the health facilities, the primary schools and the pharmacies. Effectiveness was expressed by reporting outputs which were numbers of reported events, numbers of raw signals, and numbers of verified signals. The reported events were tracked through an internal data base. Signal verification forms and epidemiological investigation reports were collected from local country centers for disease control and prevention. We adopted project managers' perspective for the cost analysis. Total costs included set-up costs (system development and training) and operating costs (data collection, quality control and signal verification). We used self-designed questionnaires to collect cost data and received, respectively, 369 and 477 facility and staff questionnaires through a cross-sectional survey with a purposive sampling following the ISSC project. All data were entered into Epidata 3.02 and exported to Stata for descriptive analysis. The number of daily reported events per unit was the highest at pharmacies, followed by health facilities and finally primary schools. Variances existed within the three groups and also between Jiangxi and Hubei. During a 15-month surveillance period, the number of raw signals for early warning in Jiangxi province (n = 36) was nine times of that in Hubei. Health facilities and primary schools had equal numbers of raw signals (n = 19), which was 9.5 times of that from pharmacies. Five signals were confirmed as outbreaks, of which two were influenza, two were chicken pox and one was mumps. The cost per reported event was the highest at primary schools, followed by health facilities and then pharmacies. The annual operating cost per surveillance unit was the highest at pharmacies, followed by health facilities and finally primary schools. Both the cost per reported event and the annual operating cost per surveillance unit in Jiangxi in each of the three groups were higher than their counterparts in Hubei. Health facilities and primary schools are better sources of syndromic surveillance data in the early warning of outbreaks. The annual operating costs of all the three components of the syndromic surveillance system in the ISSC Project were low compared to general government expenditures on health and average individual income in rural China.

The unwritten price of cosmetic tourism: an observational study and cost analysis.

PubMed

Miyagi, K; Auberson, D; Patel, A J; Malata, C M

2012-01-01

Cosmetic tourism, driven by the promise of inexpensive operations abroad, is increasingly popular despite warnings from professional bodies regarding associated risks. Increasing numbers of individuals have presented to our department requesting NHS treatment of complications from such surgery. We set out to characterize these patients and evaluate costs incurred through their assessment and management. An observational study was conducted from 2007 to 2009 on patients presenting to a tertiary referral Plastic Surgery practice with complications of cosmetic tourism surgery. Demographic characteristics, as well as those related to the operation, were recorded. Hospital patient flow pathways were constructed, cost analysis performed using Patient Level Costing, and expenditure and profitability calculated. Nineteen patients presented within the study period. Most operations were performed in Europe or Asia, and were primarily breast augmentation procedures (n=13). The principal complications were wound infection or dehiscence, and poor cosmetic results. Eleven patients received NHS treatment, at a cost of £120,841. The mean cost for all patients' management was £6360 (range: £114-£57,968), rising to £10,878 for those accepted for treatment. For 8 of the 9 patients (89%) for whom full patient level costing was available, the hospital incurred a financial loss. The costs to the NHS of managing complications of cosmetic tourism are substantial, and underestimated by central funding agencies. Copyright © 2011 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Comparative hospital cost-analysis of open and robotic-assisted radical prostatectomy.

PubMed

Tomaszewski, Jeffrey J; Matchett, Jarred C; Davies, Benjamin J; Jackman, Stephen V; Hrebinko, Ronald L; Nelson, Joel B

2012-07-01

To perform a contemporary comparative cost-analysis of robotic-assisted laparoscopic radical prostatectomy (RARP) and open radical retropubic prostatectomy (RRP). All patients undergoing RARP (n = 115) or RRP (n = 358) by 1 of 4 surgeons at a single institution during a 15-month period were retrospectively reviewed. The hospital length of stay (LOS), operative time, hospital charges, reimbursement, and direct and indirect hospital costs were analyzed and compared. The mean LOS between patients undergoing RARP (1.2 ± 0.6 days) and RRP (1.4 ± 0.8 days) was not significantly different. The operating room supply costs per case were almost 7 times greater for RARP ($2852 ± $528) than for RRP ($417 ± $59; P < .05). The ancillary, cardiology, imaging, administrative, laboratory, and pharmacy costs were not significantly different between the 2 approaches. The mean total costs per case for RARP exceeded the total costs for RRP by 62% ($14 006 ± $1641 vs $8686 ± $1989; P < .05). Payment to the hospital from all sources was nearly equivalent: $10 011 for RRP and $9993 for RARP. Therefore, the average profit for each RRP was $1325 and each RARP lost $4013. In the present single-institution analysis, the total actual costs associated with RARP were significantly greater than those for RRP and were attributable to the robotic equipment and supplies. Copyright © 2012 Elsevier Inc. All rights reserved.

Analysis and evaluation of processes and equipment in tasks 2 and 4 of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1978-01-01

Several experimental and projected Czochralski crystal growing process methods were studied and compared to available operations and cost-data of recent production Cz-pulling, in order to elucidate the role of the dominant cost contributing factors. From this analysis, it becomes apparent that the specific add-on costs of the Cz-process can be expected to be reduced by about a factor of three by 1982, and about a factor of five by 1986. A format to guide in the accumulation of the data needed for thorough techno-economic analysis of solar cell production processes was developed.

Systems design analysis applied to launch vehicle configuration

NASA Technical Reports Server (NTRS)

Ryan, R.; Verderaime, V.

1993-01-01

As emphasis shifts from optimum-performance aerospace systems to least lift-cycle costs, systems designs must seek, adapt, and innovate cost improvement techniques in design through operations. The systems design process of concept, definition, and design was assessed for the types and flow of total quality management techniques that may be applicable in a launch vehicle systems design analysis. Techniques discussed are task ordering, quality leverage, concurrent engineering, Pareto's principle, robustness, quality function deployment, criteria, and others. These cost oriented techniques are as applicable to aerospace systems design analysis as to any large commercial system.

[Cost analysis of home care with activity-based costing (ABC)].

PubMed

Lee, Su-Jeong

2004-10-01

This study was carried out to substantiate the application process of activity-based costing on the current cost of hospital home care (HHC) service. The study materials were documents, 120 client charts, health insurance demand bills, salary of 215 HHC nurses, operating expense, 6 HHC agencies, and 31 HHC nurses. The research was carried out by analyzing the HHC activities and then collecting labor and operating expenses. For resource drivers, HHC activity performance time and workload were studied. For activity drivers, the number of HHC activity performances and the activity number of visits were studied. The HHC activities were classified into 70 activities. In resource, the labor cost was 245 won per minute, operating cost was 9,570 won per visit and traffic expense was an average of 12,750 won. In resource drivers, education and training had the longest time of 67 minutes. Average length of performance for activities was 13.7 minutes. The workload was applied as a relative value. The average cost of HHC was 62,741 won and the cost ranged from 55,560 won to 74,016 won. The fixed base rate for a visit in the current HHC medical fee should be increased. Exclusion from the current fee structure or flexible operation of traveling expenses should be reviewed.

An Analysis of the Depot Material Management Overhead in the VAMOSC (Visibility and Management of Operating Support Cost System) Component Support Cost System.

DTIC Science & Technology

1987-09-01

University, the United States Air Force, or the Department of JDefense. Accession For NTIS GRA&I DTIC TAB Uliannouncedj u s t i f i c a t i o n...114 VI vi W,7% WN T "Vyn An r % List of Tables Table Page 1. ALCs Operation and Maintenance Costs ....... 53 2...CSCS deals strictly with aircraft com- ponents and subsystems that have been designated reparable, which means they are economical to repair. As part

Cost Benefit Analysis of MARSOC Marines in the Naval Postgraduate School Department of Defense Analysis

DTIC Science & Technology

2011-12-01

Policy. Graduates will develop an ability to think strategically, analyze past operations, and apply historical lessons to future joint and combined...Naval Special Warfare Development Group O-## Officer, ## Rank OPMEP Officer, Professional Military Education Program OPTEMPO Operational Tempo...Marine Corps. 2 Joint Special Operations University (2007). MCSOCOM Prrof of Concept Deployment Evaluation Report. Hurlburt Field : Joint Special

Technical and economic aspects of the Intelsat system

NASA Astrophysics Data System (ADS)

Jefferis, A. K.

1992-03-01

The paper gives some background on the Intelsat system and explains the financial principles of the organization, which operates as a cost sharing cooperative. The members contribute both capital and operating costs in accordance with their use. The determination of the measure of 'use' in such a complex system requires a careful analysis of the factors which cause the cost. Most of these are technical, based on the use of satellite power, bandwidth and similar factors. Others reflect service related features such as priority, long-term commitment and market elasticity. This last element is only taken into account after ensuring that every service fully contributes the marginal cost of providing it.

A tool for the economic analysis of mass prophylaxis operations with an application to H1N1 influenza vaccination clinics.

PubMed

Cho, Bo-Hyun; Hicks, Katherine A; Honeycutt, Amanda A; Hupert, Nathaniel; Khavjou, Olga; Messonnier, Mark; Washington, Michael L

2011-01-01

This article uses the 2009 H1N1 influenza vaccination program experience to introduce a cost analysis approach that may be relevant for planning mass prophylaxis operations, such as vaccination clinics at public health centers, work sites, schools, or pharmacy-based clinics. These costs are important for planning mass influenza vaccination activities and are relevant for all public health emergency preparedness scenarios requiring countermeasure dispensing. We demonstrate how costs vary depending on accounting perspective, staffing composition, and other factors. We also describe a mass vaccination clinic budgeting tool that clinic managers may use to estimate clinic costs and to examine how costs vary depending on the availability of volunteers or donated supplies and on the number of patients vaccinated per hour. Results from pilot tests with school-based H1N1 influenza vaccination clinic managers are described. The tool can also contribute to planning efforts for universal seasonal influenza vaccination.

IEA Wind Task 26. Wind Technology, Cost and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States. 2007 - 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vitina, Aisma; Luers, Silke; Wallasch, Anna-Kathrin

This report builds from a similar previous analysis (Schwabe et al., 2011) exploring the differences in cost of wind energy in 2008 among countries participating in IEA Wind Task 26 at that time. The levelized cost of energy (LCOE) is a widely recognized metric for understanding how technology, capital investment, operations, and financing impact the life-cycle cost of building and operating a wind plant. Schwabe et al. (2011) apply a spreadsheet-based cash flow model developed by the Energy Research Centre of the Netherlands (ECN) to estimate LCOE. This model is a detailed, discounted cash flow model used to represent themore » various cost structures in each of the participating countries from the perspective of a financial investor in a domestic wind energy project. This model is used for the present analysis as well, and comparisons are made for those countries who contributed to both reports, Denmark, Germany, and the United States.« less

Optimal Design and Operation of Permanent Irrigation Systems

NASA Astrophysics Data System (ADS)

Oron, Gideon; Walker, Wynn R.

1981-01-01

Solid-set pressurized irrigation system design and operation are studied with optimization techniques to determine the minimum cost distribution system. The principle of the analysis is to divide the irrigation system into subunits in such a manner that the trade-offs among energy, piping, and equipment costs are selected at the minimum cost point. The optimization procedure involves a nonlinear, mixed integer approach capable of achieving a variety of optimal solutions leading to significant conclusions with regard to the design and operation of the system. Factors investigated include field geometry, the effect of the pressure head, consumptive use rates, a smaller flow rate in the pipe system, and outlet (sprinkler or emitter) discharge.

Air/molten salt direct-contact heat-transfer experiment and economic analysis

NASA Astrophysics Data System (ADS)

Bohn, M. S.

1983-11-01

Direct-contact heat-transfer coefficients have been measured in a pilot-scale packed column heat exchanger for molten salt/air duty. Two types of commercial tower packings were tested: metal Raschig rings and initial Pall rings. Volumetric heat-transfer coefficients were measured and appeared to depend upon air flow but not on salt flow rate. An economic analysis was used to compare the cost-effectiveness of direct-contact heat exchange with finned-tube heat exchanger in this application. Incorporating the measured volumetric heat-transfer coefficients, a direct-contact system appeared to be from two to five times as cost-effective as a finned-tube heat exchanger, depending upon operating temperature. The large cost advantage occurs for higher operating temperatures (2700(0)C), where high rates of heat transfer and flexibility in materials choice give the cost advantage to the direct-contact heat exchanger.

Cost-performance analysis of nutrient removal in a full-scale oxidation ditch process based on kinetic modeling.

PubMed

Li, Zheng; Qi, Rong; Wang, Bo; Zou, Zhe; Wei, Guohong; Yang, Min

2013-01-01

A full-scale oxidation ditch process for treating sewage was simulated with the ASM2d model and optimized for minimal cost with acceptable performance in terms of ammonium and phosphorus removal. A unified index was introduced by integrating operational costs (aeration energy and sludge production) with effluent violations for performance evaluation. Scenario analysis showed that, in comparison with the baseline (all of the 9 aerators activated), the strategy of activating 5 aerators could save aeration energy significantly with an ammonium violation below 10%. Sludge discharge scenario analysis showed that a sludge discharge flow of 250-300 m3/day (solid retention time (SRT), 13-15 days) was appropriate for the enhancement of phosphorus removal without excessive sludge production. The proposed optimal control strategy was: activating 5 rotating disks operated with a mode of "111100100" ("1" represents activation and "0" represents inactivation) for aeration and sludge discharge flow of 200 m3/day (SRT, 19 days). Compared with the baseline, this strategy could achieve ammonium violation below 10% and TP violation below 30% with substantial reduction of aeration energy cost (46%) and minimal increment of sludge production (< 2%). This study provides a useful approach for the optimization of process operation and control.

PARAMETRIC ANALYSIS OF THE INSTALLATION AND OPERATING COSTS OF ACTIVE SOIL DEPRESSURIZATION SYSTEMS FOR RESIDENTIAL RADON MITIGATION

EPA Science Inventory

The report gives results of a recent analysis showing that cost- effective indoor radon reduction technology is required for houses with initial radon concentrations < 4 pCi/L, because 78-86% of the national lung cancer risk due to radon is associated with those houses. ctive soi...

Systematic Approach to Better Understanding Integration Costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stark, Gregory B.

2015-09-01

This research presents a systematic approach to evaluating the costs of integrating new generation and operational procedures into an existing power system, and the methodology is independent of the type of change or nature of the generation. The work was commissioned by the U.S. Department of Energy and performed by the National Renewable Energy Laboratory to investigate three integration cost-related questions: (1) How does the addition of new generation affect a system's operational costs, (2) How do generation mix and operating parameters and procedures affect costs, and (3) How does the amount of variable generation (non-dispatchable wind and solar) impactmore » the accuracy of natural gas orders? A detailed operational analysis was performed for seven sets of experiments: variable generation, large conventional generation, generation mix, gas prices, fast-start generation, self-scheduling, and gas supply constraints. For each experiment, four components of integration costs were examined: cycling costs, non-cycling VO&M costs, fuel costs, and reserves provisioning costs. The investigation was conducted with PLEXOS production cost modeling software utilizing an updated version of the Institute of Electrical and Electronics Engineers 118-bus test system overlaid with projected operating loads from the Western Electricity Coordinating Council for the Sacramento Municipal Utility District, Puget Sound Energy, and Public Service Colorado in the year 2020. The test system was selected in consultation with an industry-based technical review committee to be a reasonable approximation of an interconnection yet small enough to allow the research team to investigate a large number of scenarios and sensitivity combinations. The research should prove useful to market designers, regulators, utilities, and others who want to better understand how system changes can affect production costs.« less

Are critical pathways and implant standardization programs effective in reducing costs in total knee replacement operations?

PubMed

Ho, David M; Huo, Michael H

2007-07-01

Total knee replacement (TKR) operation is one of the most effective procedures, both clinically and in terms of cost. Because of increased volume and cost for this procedure during the past 3 decades, TKRs are often targeted for cost reduction. The purpose of this study was to evaluate the efficacy of two cost reducing methodologies, establishment of critical clinical pathways, and standardization of implant costs. Ninety patients (90 knees) were randomly selected from a population undergoing primary TKR during a 2-year period at a tertiary teaching hospital. Patients were assigned to three groups that corresponded to different strategies implemented during the evolution of the joint-replacement program. Medical records were reviewed for type of anesthesia, operative time, length of stay, and any perioperative complications. Financial information for each patient was compared among the three groups. Data analysis demonstrated that the institution of a critical pathway significantly shortened length of hospital stay and was effective in reducing the hospital costs by 18% (p < 0.05). In addition, standardization of surgical techniques under the care of a single surgeon substantially reduced the operative time. Selection of implants from a single vendor did not have any substantial effect in additionally reducing the costs. Standardized postoperative management protocols and critical clinical pathways can reduce costs and operative time. Future efforts must focus on lowering the costs of the prostheses, particularly with competitive bidding or capitation of prostheses costs. Although a single-vendor approach was not effective in this study, it is possible that a cost reduction could have been realized if more TKRs were performed, because the pricing contract was based on projected volume of TKRs to be done by the hospital.

A cost-utility analysis of the use of preoperative computed tomographic angiography in abdomen-based perforator flap breast reconstruction.

PubMed

Offodile, Anaeze C; Chatterjee, Abhishek; Vallejo, Sergio; Fisher, Carla S; Tchou, Julia C; Guo, Lifei

2015-04-01

Computed tomographic angiography is a diagnostic tool increasingly used for preoperative vascular mapping in abdomen-based perforator flap breast reconstruction. This study compared the use of computed tomographic angiography and the conventional practice of Doppler ultrasonography only in postmastectomy reconstruction using a cost-utility model. Following a comprehensive literature review, a decision analytic model was created using the three most clinically relevant health outcomes in free autologous breast reconstruction with computed tomographic angiography versus Doppler ultrasonography only. Cost and utility estimates for each health outcome were used to derive the quality-adjusted life-years and incremental cost-utility ratio. One-way sensitivity analysis was performed to scrutinize the robustness of the authors' results. Six studies and 782 patients were identified. Cost-utility analysis revealed a baseline cost savings of $3179, a gain in quality-adjusted life-years of 0.25. This yielded an incremental cost-utility ratio of -$12,716, implying a dominant choice favoring preoperative computed tomographic angiography. Sensitivity analysis revealed that computed tomographic angiography was costlier when the operative time difference between the two techniques was less than 21.3 minutes. However, the clinical advantage of computed tomographic angiography over Doppler ultrasonography only showed that computed tomographic angiography would still remain the cost-effective option even if it offered no additional operating time advantage. The authors' results show that computed tomographic angiography is a cost-effective technology for identifying lower abdominal perforators for autologous breast reconstruction. Although the perfect study would be a randomized controlled trial of the two approaches with true cost accrual, the authors' results represent the best available evidence.

An Analysis of Aviation Maintenance Operations and Supporting Costs, and Cost Capturing Systems

DTIC Science & Technology

2012-12-04

the La Mesa Parent Teacher Association. = ^Åèìáëáíáçå=oÉëÉ~êÅÜ=mêçÖê~ã= do^ar^qb=p`elli=lc=_rpfkbpp=C=mr_if`=mlif`v= = - vii -= k^s^i=mlpqdo^ar^qb=p...host.uniroma3.it/facolta/ economia /db/materiali/insegnamenti/588_3930.pdf Cost Analysis Improvement Group (CAIG). (2007). Office of the Secretary of

Health Monitoring System Technology Assessments: Cost Benefits Analysis

NASA Technical Reports Server (NTRS)

Kent, Renee M.; Murphy, Dennis A.

2000-01-01

The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

Is dibotermin alfa a cost-effective substitute for autologous iliac crest bone graft in single level lumbar interbody spine fusion?

PubMed

Svedbom, Axel; Paech, Daniel; Leonard, Catherine; Donnell, David; Song, Fujian; Boszcyk, Bronek; Rothenfluh, Dominique A; Lloyd, Andrew; Borgman, Benny

2015-11-01

To evaluate the cost-effectiveness of dibotermin alfa compared with autologous iliac crest bone graft (ICBG) for patients undergoing single level lumbar interbody spinal fusion in a UK hospital setting. An individual patient data (IPD) meta-analysis of six randomized controlled clinical trials and two single arm trials compared dibotermin alfa on an absorbable collagen implantation matrix (ACIM) (n = 456) and ICBG (n = 244) on resource use, re-operation rates, and SF-6D (Short form 6-dimension) health utility (total N = 700). Failure-related second surgery, operating time, post-operative hospital stay, and quality-adjusted life years (QALYs) derived from the IPD meta-analysis were included as inputs in an economic evaluation undertaken to assess the cost-effectiveness of dibotermin alfa/ACIM versus ICBG for patients undergoing single level lumbar interbody spinal fusion. A four year time horizon and the United Kingdom (UK) National Health Service (NHS) and Personal Social Services (PSS) perspective was adopted in the base case, with sensitivity analyses performed to gauge parameter uncertainty. In the base case analysis, patients treated using dibotermin alfa/ACIM (12 mg pack) accrued 0.055 incremental QALYs at an incremental cost of £ 737, compared with patients treated with ICBG. This resulted in an incremental cost-effectiveness ratio (ICER) of £ 13,523, indicating that at a willingness-to-pay threshold of £ 20,000, dibotermin alfa/ACIM is a cost-effective intervention relative to ICBG from the NHS and PSS perspective. In a UK hospital setting, dibotermin alfa/ACIM is a cost-effective substitute for ICBG for patients who require lumbar interbody arthrodesis.

Computer assisted yarding cost analysis.

Treesearch

Ronald W. Mifflin

1980-01-01

Programs for a programable calculator and a desk-top computer are provided for quickly determining yarding cost and comparing the economics of alternative yarding systems. The programs emphasize the importance of the relationship between production rate and machine rate, which is the hourly cost of owning and operating yarding equipment. In addition to generating the...

Application of multi-criteria decision analysis in selecting of sustainable investments

NASA Astrophysics Data System (ADS)

Kozik, Renata

2017-07-01

Investors of construction projects, especially financed with public money, quite slowly adapt environmentally friendly solutions, e.g. passive buildings. Practice shows that the use of green public procurement among the public investors is negligible. Energy-saving technologies and equipment are expensive at the construction phase and investors less or not at all take into account the future operating costs. The aim of this article is to apply the method of multi-criteria analysis ELECTRE to select the best investment in terms of cost of implementation, operation, as well as the impact on the environment.

Study 2.5 final report. DORCA computer program. Volume 5: Analysis report

NASA Technical Reports Server (NTRS)

Campbell, N.

1972-01-01

A modification of the Dynamic Operational Requirements and Cost Analysis Program to perform traffic analyses of the automated satellite program is described. Inherent in the analyses of the automated satellite program was the assumption that a number of vehicles were available to perform any or all of the missions within the satellite program. The objective of the modification was to select a vehicle or group of vehicles for performing all of the missions at the lowest possible cost. A vehicle selection routine and the capability to simulate ground based vehicle operational modes were incorporated into the program.

Efficiency assessment of wastewater treatment plants: A data envelopment analysis approach integrating technical, economic, and environmental issues.

PubMed

Castellet, Lledó; Molinos-Senante, María

2016-02-01

The assessment of the efficiency of wastewater treatment plants (WWTPs) is essential to compare their performance and consequently to identify the best operational practices that can contribute to the reduction of operational costs. Previous studies have evaluated the efficiency of WWTPs using conventional data envelopment analysis (DEA) models. Most of these studies have considered the operational costs of the WWTPs as inputs, while the pollutants removed from wastewater are treated as outputs. However, they have ignored the fact that each pollutant removed by a WWTP involves a different environmental impact. To overcome this limitation, this paper evaluates for the first time the efficiency of a sample of WWTPs by applying the weighted slacks-based measure model. It is a non-radial DEA model which allows assigning weights to the inputs and outputs according their importance. Thus, the assessment carried out integrates environmental issues with the traditional "techno-economic" efficiency assessment of WWTPs. Moreover, the potential economic savings for each cost item have been quantified at a plant level. It is illustrated that the WWTPs analyzed have significant room to save staff and energy costs. Several managerial implications to help WWTPs' operators make informed decisions were drawn from the methodology and empirical application carried out. Copyright © 2015 Elsevier Ltd. All rights reserved.

Optimal synthesis and design of the number of cycles in the leaching process for surimi production.

PubMed

Reinheimer, M Agustina; Scenna, Nicolás J; Mussati, Sergio F

2016-12-01

Water consumption required during the leaching stage in the surimi manufacturing process strongly depends on the design and the number and size of stages connected in series for the soluble protein extraction target, and it is considered as the main contributor to the operating costs. Therefore, the optimal synthesis and design of the leaching stage is essential to minimize the total annual cost. In this study, a mathematical optimization model for the optimal design of the leaching operation is presented. Precisely, a detailed Mixed Integer Nonlinear Programming (MINLP) model including operating and geometric constraints was developed based on our previous optimization model (NLP model). Aspects about quality, water consumption and main operating parameters were considered. The minimization of total annual costs, which considered a trade-off between investment and operating costs, led to an optimal solution with lesser number of stages (2 instead of 3 stages) and higher volumes of the leaching tanks comparing with previous results. An analysis was performed in order to investigate how the optimal solution was influenced by the variations of the unitary cost of fresh water, waste treatment and capital investment.

Space shuttle/food system study. Volume 2, Appendix A: Active heating system-screening analysis. Appendix B: Reconstituted food heating techniques analysis

NASA Technical Reports Server (NTRS)

1974-01-01

Technical data are presented which were used to evaluate active heating methods to be incorporated into the space shuttle food system design, and also to evaluate the relative merits and penalties associated with various approaches to the heating of rehydrated food during space flight. Equipment heating candidates were subject to a preliminary screening performed by a selection rationale process which considered the following parameters; (1) gravitational effect; (2) safety; (3) operability; (4) system compatibility; (5) serviceability; (6) crew acceptability; (7) crew time; (8) development risk; and (9) operating cost. A hot air oven, electrically heated food tray, and microwave oven were selected for further consideration and analysis. Passive, semi-active, and active food preparation approaches were also studied in an effort to determine the optimum method for heating rehydrated food. Potential complexity, cost, vehicle impact penalties, and palatability were considered in the analysis. A summary of the study results is provided along with cost estimates for each of the potential sytems

Laparoscopic versus open incisional hernia repair: a retrospective cohort study with costs analysis on 269 patients.

PubMed

Soliani, G; De Troia, A; Portinari, M; Targa, S; Carcoforo, P; Vasquez, G; Fisichella, P M; Feo, C V

2017-08-01

To compare clinical outcomes and institutional costs of elective laparoscopic and open incisional hernia mesh repairs and to identify independent predictors of prolonged operative time and hospital length of stay (LOS). Retrospective observational cohort study on 269 consecutive patients who underwent elective incisional hernia mesh repair, laparoscopic group (N = 94) and open group (N = 175), between May 2004 and July 2014. Operative time was shorter in the laparoscopic versus open group (p < 0.0001). Perioperative morbidity and mortality were similar in the two groups. Patients in the laparoscopic group were discharged a median of 2 days earlier (p < 0.0001). At a median follow-up over 50 months, no difference in hernia recurrence was detected between the groups. In laparoscopic group total institutional costs were lower (p = 0.02). At Cox regression analysis adjusted for potential confounders, large wall defect (W3) and higher operative risk (ASA score 3-4) were associated with prolonged operative time, while midline hernia site was associated with increased hospital LOS. Open surgical approach was associated with prolongation of both operative time and LOS. Laparoscopic approach may be considered safely to all patients for incisional hernia repair, regardless of patients' characteristics (age, gender, BMI, ASA score, comorbidities) and size of the wall defect (W2-3), with the advantage of shorter operating time and hospital LOS that yields reduced total institutional costs. Patients with higher ASA score and large hernia defects are at risk of prolonged operative time, while an open approach is associated with longer duration of surgical operation and hospital LOS.

Reusable single-port access device shortens operative time and reduces operative costs.

PubMed

Shussman, Noam; Kedar, Asaf; Elazary, Ram; Abu Gazala, Mahmoud; Rivkind, Avraham I; Mintz, Yoav

2014-06-01

In recent years, single-port laparoscopy (SPL) has become an attractive approach for performing surgical procedures. The pitfalls of this approach are technical and financial. Financial concerns are due to the increased cost of dedicated devices and prolonged operating room time. Our aim was to calculate the cost of SPL using a reusable port and instruments in order to evaluate the cost difference between this approach to SPL using the available disposable ports and standard laparoscopy. We performed 22 laparoscopic procedures via the SPL approach using a reusable single-port access system and reusable laparoscopic instruments. These included 17 cholecystectomies and five other procedures. Operative time, postoperative length of stay (LOS) and complications were prospectively recorded and were compared with similar data from our SPL database. Student's t test was used for statistical analysis. SPL was successfully performed in all cases. Mean operative time for cholecystectomy was 72 min (range 40-116). Postoperative LOS was not changed from our standard protocols and was 1.1 days for cholecystectomy. The postoperative course was within normal limits for all patients and perioperative morbidity was recorded. Both operative time and length of hospital stay were shorter for the 17 patients who underwent cholecystectomy using a reusable port than for the matched previous 17 SPL cholecystectomies we performed (p < 0.001). Prices of disposable SPL instruments and multiport access devices as well as extraction bags from different manufacturers were used to calculate the cost difference. Operating with a reusable port ended up with an average cost savings of US$388 compared with using disposable ports, and US$240 compared with standard laparoscopy. Single-port laparoscopic surgery is a technically challenging and expensive surgical approach. Financial concerns among others have been advocated against this approach; however, we demonstrate herein that using a reusable port and instruments reduces operative time and overall operative costs, even beyond the cost of standard laparoscopy.

Development of a low-cost double rotor axial flux motor with soft magnetic composite and ferrite permanent magnet materials

NASA Astrophysics Data System (ADS)

Liu, Chengcheng; Zhu, Jianguo; Wang, Youhua; Guo, Youguang; Lei, Gang; Liu, Xiaojing

2015-05-01

This paper proposes a low-cost double rotor axial flux motor (DRAFM) with low cost soft magnetic composite (SMC) core and ferrite permanent magnets (PMs). The topology and operating principle of DRAFM and design considerations for best use of magnetic materials are presented. A 905 W 4800 rpm DRAFM is designed for replacing the high cost NdFeB permanent magnet synchronous motor (PMSM) in a refrigerator compressor. By using the finite element method, the electromagnetic parameters and performance of the DRAFM operated under the field oriented control scheme are calculated. Through the analysis, it is shown that that the SMC and ferrite PM materials can be good candidates for low-cost electric motor applications.

Turnaround operations analysis for OTV. Volume 2: Detailed technical report

NASA Technical Reports Server (NTRS)

1988-01-01

The objectives and accomplishments were to adapt and apply the newly created database of Shuttle/Centaur ground operations. Previously defined turnaround operations analyses were to be updated for ground-based OTVs (GBOTVs) and space-based OTVs (SBOTVs), design requirements identified for both OTV and Space Station accommodations hardware, turnaround operations costs estimated, and a technology development plan generated to develop the required capabilities. Technical and programmatic data were provided for NASA pertinent to OTV round and space operations requirements, turnaround operations, task descriptions, timelines and manpower requirements, OTV modular design and booster and Space Station interface requirements. SBOTV accommodations development schedule, cost and turnaround operations requirements, and a technology development plan for ground and space operations and space-based accommodations facilities and support equipment. Significant conclusion are discussed.

Preliminary Analysis of Helicopter Options to Support Tunisian Counterterrorism Operations

DTIC Science & Technology

2016-04-27

locations along roads and tracks in border areas, and small settlements in complex terrain (Figure 1, right; examples shown in Figure 2). Analysis For...political implications. In this preliminary analysis , we focus on the question of cost-effectiveness in the UH-60M’s primary role: Which alternative...platforms could perform the assault mission, and at what cost? The core of our analysis is detailed modeling of key “mission tasks” on a sortie-by-sortie

Cost-effectiveness of simultaneous versus sequential surgery in head and neck reconstruction.

PubMed

Wong, Kevin K; Enepekides, Danny J; Higgins, Kevin M

2011-02-01

To determine whether simultaneous (ablation and reconstruction overlaps by two teams) head and neck reconstruction is cost effective compared to sequentially (ablation followed by reconstruction) performed surgery. Case-controlled study. Tertiary care hospital. Oncology patients undergoing free flap reconstruction of the head and neck. A match paired comparison study was performed with a retrospective chart review examining the total time of surgery for sequential and simultaneous surgery. Nine patients were selected for both the sequential and simultaneous groups. Sequential head and neck reconstruction patients were pair matched with patients who had undergone similar oncologic ablative or reconstructive procedures performed in a simultaneous fashion. A detailed cost analysis using the microcosting method was then undertaken looking at the direct costs of the surgeons, anesthesiologist, operating room, and nursing. On average, simultaneous surgery required 3 hours 15 minutes less operating time, leading to a cost savings of approximately $1200/case when compared to sequential surgery. This represents approximately a 15% reduction in the cost of the entire operation. Simultaneous head and neck reconstruction is more cost effective when compared to sequential surgery.

Safety and cost-effectiveness analysis of laparoscopic splenectomy by secondary pedicle division using monopolar electrocautery.

PubMed

Zhou, Jianyin; Liu, Pingguo; Yin, Zhenyu; Zhao, Yilin; Wang, Xiaomin

2013-09-01

The expense of laparoscopic splenectomy (LS) has limited its use in developing countries, while medical costs are increasing worldwide. In this study, we performed LS by secondary pedicle division using monopolar electrocautery to achieve cost savings. Over seven years, we performed 45 consecutive LSs by secondary pedicle division using monopolar electrocautery (n=17) or ultrasonic shears (n=28) at a single center. These were reviewed to assess outcome and cost. Mean operating time was 179.7min, 7 conversions to open operation (15.6%) were necessary. There were four postoperative complications (8.9%) and no deaths. Twenty-three of 28 (82.1%) patients with idiopathic thrombocytopenic purpura developed a long-term positive response; and mean operative cost was RMB6,577 (US$1,034), which was much lower than that of Endo-GIATM in published reports. Between the monopolar electrocautery and ultrasonic shears groups, there were no significant differences in demographic characteristics or intraoperative and postoperative details, but operative cost was significantly lower in the former (RMB4,416, US$696 vs. RMB7,889, US$1,243; p<0.01). LS by secondary pedicle division using monopolar electrocautery is safe, efficacious and economical.

Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D Laser Scanning Technology, and Collaborative Product Lifecycle Management on Ship Maintenance and Modernization Cost Savings

DTIC Science & Technology

2016-01-30

SPONSORED REPORT SERIES Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D Laser Scanning Technology, and Collaborative...Report Series Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D Laser Scanning Technology, and Collaborative Product Lifecycle...Application Areas for 3D Printing ........................................................ 36 Figure 15. Potential Applications of 3D

Tractor-logging costs and production in old-growth redwood forests

Treesearch

Kenneth N. Boe

1963-01-01

A cost accounting analysis of full-scale logging operations in old-growth redwood during 2 years revealed that it cost $12.24 per M bd. ft. (gross Scribner log scale) to get logs on trucks. Road development costs averaged another $5.19 per M bd. ft. Felling-bucking production was calculated by average tree d.b.h. Both skidding and loading outputs per hour were...

An Analysis of the Cost Effectiveness of Various Electronic Alternatives for Delivering Distance Education Compared to the Travel Costs for Live Instruction.

ERIC Educational Resources Information Center

Caffarella, Edward; And Others

The feasibility and relative costs of four telecommunication systems for delivering university courses to distant locations in Colorado were compared. The four systems were compressed video, vertical blanking interval video, satellite video, and audiographic systems. Actual costs to install and operate each for a 5-year period were determined,…

Aircraft System Analysis of Technology Benefits to Civil Transport Rotorcraft

NASA Technical Reports Server (NTRS)

Wilkerson, Joseph B.; Smith, Roger L.

2008-01-01

An aircraft systems analysis was conducted to evaluate the net benefits of advanced technologies on two conceptual civil transport rotorcraft, to quantify the potential of future civil rotorcraft to become operationally viable and economically competitive, with the ultimate goal of alleviating congestion in our airways, runways and terminals. These questions are three of many that must be resolved for the successful introduction of civil transport rotorcraft: 1) Can civil transport rotorcraft actually relieve current airport congestion and improve overall air traffic and passenger throughput at busy hub airports? What is that operational scenario? 2) Can advanced technology make future civil rotorcraft economically competitive in scheduled passenger transport? What are those enabling technologies? 3) What level of investment is necessary to mature the key enabling technologies? This study addresses the first two questions, and several others, by applying a systems analysis approach to a broad spectrum of potential advanced technologies at a conceptual level of design. The method was to identify those advanced technologies that showed the most promise and to quantify their benefits to the design, development, production, and operation of future civil rotorcraft. Adjustments are made to sizing data by subject matter experts to reflect the introduction of new technologies that offer improved performance, reduced weight, reduced maintenance, or reduced cost. This study used projected benefits from new, advanced technologies, generally based on research results, analysis, or small-scale test data. The technologies are identified, categorized and quantified in the report. The net benefit of selected advanced technologies is quantified for two civil transport rotorcraft concepts, a Single Main Rotor Compound (SMRC) helicopter designed for 250 ktas cruise airspeed and a Civil Tilt Rotor (CTR) designed for 350 ktas cruise airspeed. A baseline design of each concept was sized for a representative civil passenger transport mission, using current technology. Individual advanced technologies are quantified and applied to resize the aircraft, thereby quantifying the net benefit of that technology to the rotorcraft. Estimates of development cost, production cost and operating and support costs are made with a commercial cost estimating program, calibrated to Boeing products with adjustments for future civil production processes. A cost metric of cash direct operating cost per available seat-mile (DOC ASM) is used to compare the cost benefit of the technologies. The same metric is used to compare results with turboprop operating costs. Reduced engine SFC was the most advantageous advanced technology for both rotorcraft concepts. Structural weight reduction was the second most beneficial technology, followed by advanced drive systems and then by technology for rotorcraft performance. Most of the technologies evaluated in this report should apply similarly to conventional helicopters. The implicit assumption is that resources will become available to mature the technologies for fullscale production aircraft. That assumption is certainly the weak link in any forecast of future possibilities. The analysis serves the purpose of identifying which technologies offer the most potential benefit, and thus the ones that should receive the highest priority for continued development. This study directly addressed the following NASA Subsonic Rotary Wing (SRW) subtopics: SR W.4.8.I.J Establish capability for rotorcraft system analysis and SRW. 4.8.I.4 Conduct limited technology benefit assessment on baseline rotorcraft configurations.

Optimization of power systems with voltage security constraints

NASA Astrophysics Data System (ADS)

Rosehart, William Daniel

As open access market principles are applied to power systems, significant changes in their operation and control are occurring. In the new marketplace, power systems are operating under higher loading conditions as market influences demand greater attention to operating cost versus stability margins. Since stability continues to be a basic requirement in the operation of any power system, new tools are being considered to analyze the effect of stability on the operating cost of the system, so that system stability can be incorporated into the costs of operating the system. In this thesis, new optimal power flow (OPF) formulations are proposed based on multi-objective methodologies to optimize active and reactive power dispatch while maximizing voltage security in power systems. The effects of minimizing operating costs, minimizing reactive power generation and/or maximizing voltage stability margins are analyzed. Results obtained using the proposed Voltage Stability Constrained OPF formulations are compared and analyzed to suggest possible ways of costing voltage security in power systems. When considering voltage stability margins the importance of system modeling becomes critical, since it has been demonstrated, based on bifurcation analysis, that modeling can have a significant effect of the behavior of power systems, especially at high loading levels. Therefore, this thesis also examines the effects of detailed generator models and several exponential load models. Furthermore, because of its influence on voltage stability, a Static Var Compensator model is also incorporated into the optimization problems.

Cost-effectiveness analysis of treatments for vertebral compression fractures.

PubMed

Edidin, Avram A; Ong, Kevin L; Lau, Edmund; Schmier, Jordana K; Kemner, Jason E; Kurtz, Steven M

2012-07-01

Vertebral compression fractures (VCFs) can be treated by nonsurgical management or by minimally invasive surgical treatment including vertebroplasty and balloon kyphoplasty. The purpose of the present study was to characterize the cost to Medicare for treating VCF-diagnosed patients by nonsurgical management, vertebroplasty, or kyphoplasty. We hypothesized that surgical treatments for VCFs using vertebroplasty or kyphoplasty would be a cost-effective alternative to nonsurgical management for the Medicare patient population. Cost per life-year gained for VCF patients in the US Medicare population was compared between operated (kyphoplasty and vertebroplasty) and non-operated patients and between kyphoplasty and vertebroplasty patients, all as a function of patient age and gender. Life expectancy was estimated using a parametric Weibull survival model (adjusted for comorbidities) for 858 978 VCF patients in the 100% Medicare dataset (2005-2008). Median payer costs were identified for each treatment group for up to 3 years following VCF diagnosis, based on 67 018 VCF patients in the 5% Medicare dataset (2005-2008). A discount rate of 3% was used for the base case in the cost-effectiveness analysis, with 0% and 5% discount rates used in sensitivity analyses. After accounting for the differences in median costs and using a discount rate of 3%, the cost per life-year gained for kyphoplasty and vertebroplasty patients ranged from $US1863 to $US6687 and from $US2452 to $US13 543, respectively, compared with non-operated patients. The cost per life-year gained for kyphoplasty compared with vertebroplasty ranged from -$US4878 (cost saving) to $US2763. Among patients for whom surgical treatment was indicated, kyphoplasty was found to be cost effective, and perhaps even cost saving, compared with vertebroplasty. Even for the oldest patients (85 years of age and older), both interventions would be considered cost effective in terms of cost per life-year gained.

Economic evaluation of the new oral anticoagulants for the prevention of thromboembolic events: a cost-minimization analysis.

PubMed

Marcolino, Milena Soriano; Polanczyk, Carisi Anne; Bovendorp, Ana Carolina Caixeta; Marques, Naiara Silveira; Silva, Lilian Azevedo da; Turquia, Cintia Proveti Barbosa; Ribeiro, Antonio Luiz

2016-01-01

Randomized clinical trials have shown that the new oral anticoagulants have at least similar impact regarding reduction of thromboembolic events, compared with warfarin, with similar or improved safety profiles. There is little data on real costs within clinical practice. Our aim here was to perform economic analysis on these strategies from the perspective of Brazilian society and the public healthcare system. Cost-minimization analysis; anticoagulation clinic of Hospital Municipal Odilon Behrens, Belo Horizonte, MG, Brazil. Patients at the anticoagulation clinic were recruited between August and October 2011, with minimum follow-up of four weeks. Operational and non-operational costs were calculated and corrected to 2015. This study included 633 patients (59% women) of median age 62 years (interquartile range -49-73). The mean length of follow-up was 64 ± 28 days. The average cost per patient per month was $ 54.26 (US dollars). Direct costs accounted for 32.5% of the total cost. Of these, 69.5% were related to healthcare professionals. With regards to indirect costs, 52.4% were related to absence from work and 47.6% to transportation. Apixaban, dabigatran and rivaroxaban were being sold to Brazilian public institutions, on average, for $ 49.87, $ 51.40 and $ 52.16 per patient per month, respectively, which was lower than the costs relating to warfarin treatment. In the Brazilian context, from the perspective of society and the public healthcare system, the cumulative costs per patient using warfarin with follow-up in anticoagulation clinics is currently higher than the strategy of prescribing the new oral anticoagulants.

Gas engine heat pump cycle analysis. Volume 1: Model description and generic analysis

NASA Astrophysics Data System (ADS)

Fischer, R. D.

1986-10-01

The task has prepared performance and cost information to assist in evaluating the selection of high voltage alternating current components, values for component design variables, and system configurations and operating strategy. A steady-state computer model for performance simulation of engine-driven and electrically driven heat pumps was prepared and effectively used for parametric and seasonal performance analyses. Parametric analysis showed the effect of variables associated with design of recuperators, brine coils, domestic hot water heat exchanger, compressor size, engine efficiency, insulation on exhaust and brine piping. Seasonal performance data were prepared for residential and commercial units in six cities with system configurations closely related to existing or contemplated hardware of the five GRI engine contractors. Similar data were prepared for an advanced variable-speed electric unit for comparison purposes. The effect of domestic hot water production on operating costs was determined. Four fan-operating strategies and two brine loop configurations were explored.

Defining the cost of care for lobectomy and segmentectomy: a comparison of open, video-assisted thoracoscopic, and robotic approaches.

PubMed

Deen, Shaun A; Wilson, Jennifer L; Wilshire, Candice L; Vallières, Eric; Farivar, Alexander S; Aye, Ralph W; Ely, Robson E; Louie, Brian E

2014-03-01

Knowledge about the cost of open, video-assisted thoracoscopic (VATS), or robotic lung resection and drivers of cost is crucial as the cost of care comes under scrutiny. This study aims to define the cost of anatomic lung resection and evaluate potential cost-saving measures. A retrospective review of patients who had anatomic resection for early stage lung cancer, carcinoid, or metastatic foci between 2008 and 2012 was performed. Direct hospital cost data were collected from 10 categories. Capital depreciation was separated for the robotic and VATS cases. Key costs were varied in a sensitivity analysis. In all, 184 consecutive patients were included: 69 open, 57 robotic, and 58 VATS. Comorbidities and complication rates were similar. Operative time was statistically different among the three modalities, but length of stay was not. There was no statistically significant difference in overall cost between VATS and open cases (Δ = $1,207) or open and robotic cases (Δ = $1,975). Robotic cases cost $3,182 more than VATS (p < 0.001) owing to the cost of robotic-specific supplies and depreciation. The main opportunities to reduce cost in open cases were the intensive care unit, respiratory therapy, and laboratories. Lowering operating time and supply costs were targets for VATS and robotic cases. VATS is the least expensive surgical approach. Robotic cases must be shorter in operative time or reduce supply costs, or both, to be competitive. Lessening operating time, eradicating unnecessary laboratory work, and minimizing intensive care unit stays will help decrease direct hospital costs. Copyright © 2014 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Cost-effectiveness analysis of the treatment of large leiomyomas: laparoscopic assisted vaginal hysterectomy versus abdominal hysterectomy.

PubMed

Mittapalli, Raja; Fanning, James; Flora, Robert; Fenton, Bradford W

2007-05-01

The purpose of this study was to perform a cost-effectiveness analysis comparing the treatment of large leiomyomas by laparoscopic assisted vaginal hysterectomy (LAVH) versus abdominal hysterectomy (AH). Twenty consecutive LAVH were compared to 20 consecutive AH for leiomyoma > or = 250 g. Hospital costs were obtained through Healthcare cost accounting system. The 6 principles of cost-effectiveness analysis were used. The groups were similar in respect to age, weight, race, medical comorbidities, blood loss, and operative time. Median uterine weight (513 g) was approximately 20% > for LAVH. Length of stay and pain was significantly less for LAVH. Total hospital cost for AH was approximately 12% less expensive ($4394 vs $5023, P = .18). Because of multiple benefits of LAVH versus AH and no significant difference in cost, we believe LAVH is an acceptable treatment for large leiomyoma.

A sensitivity analysis of central flat-plate photovoltaic systems and implications for national photovoltaics program planning

NASA Technical Reports Server (NTRS)

Crosetti, M. R.

1985-01-01

The sensitivity of the National Photovoltaic Research Program goals to changes in individual photovoltaic system parameters is explored. Using the relationship between lifetime cost and system performance parameters, tests were made to see how overall photovoltaic system energy costs are affected by changes in the goals set for module cost and efficiency, system component costs and efficiencies, operation and maintenance costs, and indirect costs. The results are presented in tables and figures for easy reference.

Cost-benefit analysis of alternative fuels and motive designs.

DOT National Transportation Integrated Search

2013-04-01

This project was funded by the Federal Railroad Administration to better understand the potential cost and benefits of using alternative fuels for U.S. freight and passenger locomotive operations. The framework for a decision model was developed by T...

Aligning oversize/overweight permit fees with agency costs : critical issues.

DOT National Transportation Integrated Search

2013-08-01

This project provides an elementary analysis of issues and a proposed framework for the state to evaluate cost recovery options : due to OSOW operations. The authors provide a review of current permitting practices, provide a sampling of fee structur...

Aligning oversize/overweight fees with agency costs : critical issues.

DOT National Transportation Integrated Search

2013-08-01

This project provides an elementary analysis of issues and a proposed framework for the state to evaluate cost recovery options : due to OSOW operations. The authors provide a review of current permitting practices, provide a sampling of fee structur...

Application of modern tools and techniques to maximize engineering productivity in the development of orbital operations plans for the space station progrm

NASA Technical Reports Server (NTRS)

Manford, J. S.; Bennett, G. R.

1985-01-01

The Space Station Program will incorporate analysis of operations constraints and considerations in the early design phases to avoid the need for later modifications to the Space Station for operations. The application of modern tools and administrative techniques to minimize the cost of performing effective orbital operations planning and design analysis in the preliminary design phase of the Space Station Program is discussed. Tools and techniques discussed include: approach for rigorous analysis of operations functions, use of the resources of a large computer network, and providing for efficient research and access to information.

Advanced Propulsion System Studies for General Aviation Aircraft

NASA Technical Reports Server (NTRS)

Eisenberg, Joseph D. (Technical Monitor); German, Jon

2003-01-01

This final report addresses the following topics: Market Impact Analysis (1) assessment of general aviation, including commuter/regional, aircraft market impact due to incorporation of advanced technology propulsion system on acquisition and operating costs, job creation and/or manpower demand, and future fleet size; (2) selecting an aircraft and engine for the study by focusing on the next generation 19-passenger commuter and the Williams International FJ44 turbofan engine growth. Propulsion System Analysis Conducted mission analysis studies and engine cycle analysis to define a new commuter mission and required engine performance, define acquisition and operating costs and, select engine configuration and initiated preliminary design for hardware modifications required. Propulsion System Benefits (1) assessed and defined engine emissions improvements, (2) assessed and defined noise reduction potential and, (3) conducted a cost analysis impact study. Review of Relevant NASA Programs Conducted literature searches using NERAC and NASA RECON services for related technology in the emissions and acoustics area. Preliminary Technology Development Plans Defined plan to incorporate technology improvements for an FJ44-2 growth engine in performance, emissions, and noise suppression.

Analysis of Advanced Modular Power Systems (AMPS) for Deep Space Exploration

NASA Technical Reports Server (NTRS)

Oeftering, Richard; Soeder, James F.; Beach, Ray

2014-01-01

The Advanced Modular Power Systems (AMPS) project is developing a modular approach to spacecraft power systems for exploration beyond Earth orbit. AMPS is intended to meet the need of reducing the cost of design development, test and integration and also reducing the operational logistics cost of supporting exploration missions. AMPS seeks to establish modular power building blocks with standardized electrical, mechanical, thermal and data interfaces that can be applied across multiple exploration vehicles. The presentation discusses the results of a cost analysis that compares the cost of the modular approach against a traditional non-modular approach.

Cost analysis and outcomes of a second-look tympanoplasty-mastoidectomy strategy for cholesteatoma.

PubMed

Crowson, Matthew G; Ramprasad, Vaibhav H; Chapurin, Nikita; Cunningham, Calhoun D; Kaylie, David M

2016-11-01

To analyze cost and compare cholesteatoma recidivism and hearing outcomes with single-stage and second-look operative strategies. Retrospective review and cost analysis. Adult and pediatric patients who underwent a tympanoplasty with mastoidectomy for cholesteatoma with a single-stage or second-look operative strategy were identified. Variables included procedure approach, residual or recurrent cholesteatoma, ossicular chain reconstruction frequency, and operative complications. Audiologic outcomes included pre-/postoperative air bone gap (ABG) and word recognition score (WRS). Cost analysis included charges for consultation and follow-up visits, surgical procedures, computed tomography temporal bone scans, and audiology visits. One hundred and six patients had a tympanoplasty with mastoidectomy for cholesteatoma, with 80 canal wall-up procedures (CWU) as initial approach. Of these, 46 (57.5%) CWU patients had a planned second look. Two (4.3%) CWU patients had recurrent cholesteatoma and 20 (43.4%) had residual identified at second look. Four (11.7%) single-stage CWU strategy patients developed recurrent cholesteatoma. There was no significant difference in pre-/postoperative ABG and WRS between second look and single stage (P > 0.05). Compared to second-look patients, single-stage patients had significantly fewer postoperative visits (6.32 vs. 10.4; P = 0.007), and significantly lower overall charges for care ($23,529. vs. $41.411; P < 0.0001). The goal of cholesteatoma surgery is to produce a safe ear, and a second-look strategy after CWU has historically been used to evaluate for recurrent or residual disease. The cholesteatoma recurrence rate at a second look after a CWU tympanoplasty-mastoidectomy is low. Costs of operative procedures are a significant proportion of healthcare resource expenditures. Considering the low rate of cholesteatoma recurrence and relatively high cost of care, implementation of a second-look strategy should be individually tailored and not universally performed. 4. Laryngoscope, 126:2574-2579, 2016. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Programme Costing - A Logical Step Toward Improved Management.

ERIC Educational Resources Information Center

McDougall, Ronald N.

The analysis of costs of university activities from a functional or program point of view, rather than an organizational unit basis, is not only an imperative for the planning and management of universities, but also a logical method of examing the costs of university operations. A task force of the Committee of Finance Officers-Universities of…

Summary of Capital and Operations & Maintenance Cost Experience of Automated Guideway Transit Systems Costs and Trends for the period 1976-1978. Supplement I

DOT National Transportation Integrated Search

1979-10-01

This costs supplement is presented in the form of a series of tables and figures which summarize the data obtained as well as the results of analysis. Comments and explanatory notes relative to tables/figures are made where appropriate. Also included...

The High Cost of Leaving: An Analysis of the Cost of Teacher Turnover

ERIC Educational Resources Information Center

Watlington, Eliah; Shockley, Robert; Guglielmino, Paul; Felsher, Rivka

2010-01-01

The cost of teacher turnover to schools and school districts has only recently been studied. This research reveals that when high-quality teachers leave the classroom, the effect on both student performance and school and district fiscal operations is significant and deleterious. The implications for study in this area include the planning of…

Summary of: Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a Production Cost Model (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denholm, P.; Hummon, M.

2013-02-01

Concentrating solar power (CSP) deployed with thermal energy storage (TES) provides a dispatchable source of renewable energy. The value of CSP with TES, as with other potential generation resources, needs to be established using traditional utility planning tools. Production cost models, which simulate the operation of grid, are often used to estimate the operational value of different generation mixes. CSP with TES has historically had limited analysis in commercial production simulations. This document describes the implementation of CSP with TES in a commercial production cost model. It also describes the simulation of grid operations with CSP in a test systemmore » consisting of two balancing areas located primarily in Colorado.« less

Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a Production Cost Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denholm, P.; Hummon, M.

2012-11-01

Concentrating solar power (CSP) deployed with thermal energy storage (TES) provides a dispatchable source of renewable energy. The value of CSP with TES, as with other potential generation resources, needs to be established using traditional utility planning tools. Production cost models, which simulate the operation of grid, are often used to estimate the operational value of different generation mixes. CSP with TES has historically had limited analysis in commercial production simulations. This document describes the implementation of CSP with TES in a commercial production cost model. It also describes the simulation of grid operations with CSP in a test systemmore » consisting of two balancing areas located primarily in Colorado.« less

Epidural analgesia during labour, routinely or on request: a cost-effectiveness analysis.

PubMed

Bonouvrié, Kimberley; van den Bosch, Anouk; Roumen, Frans J M E; van Kuijk, Sander M; Nijhuis, Jan G; Evers, Silvia M A A; Wassen, Martine M L H

2016-12-01

To assess the cost-effectiveness of routine labour epidural analgesia (EA), from a societal perspective, as compared with labour analgesia on request. Women delivering of a singleton in cephalic presentation beyond 36+0 weeks' gestation were randomly allocated to routine labour EA or analgesia on request in one university and one non-university teaching hospital in the Netherlands. Costs included all medical, non-medical and indirect costs from randomisation to 6 weeks postpartum. Effectiveness was defined as a non-operative, spontaneous vaginal delivery without EA-related maternal adverse effects. Incremental cost-effectiveness ratio (ICER) was defined as the ratio of the difference in costs and the difference in effectiveness between both groups. Data were analysed according to intention to treat and divided into a base case analysis and a sensitivity analysis. Total delivery costs in the routine EA group (n=233) were higher than in the labour on request group (n=255) (difference -€ 322, 95% CI -€ 60 to € 355) due to more medication costs (including EA), a longer stay in the labour ward, and more operations including caesarean sections. Total postpartum hospital costs in the routine EA group were lower (difference -€ 344, 95% CI -€ 1338 to € 621) mainly due to less neonatal admissions (difference -€ 472, 95% CI -€ 1297 to € 331), whereas total postpartum home and others costs were comparable (difference -€ 20, 95% CI -€ 267 to € 248, and -€ 1, 95% CI -€ 67 to € 284, respectively). As a result, the overall mean costs per woman were comparable between the routine EA group and the analgesia on request group (€ 8.708 and € 8.710, respectively, mean difference -€ 2, 95% CI -€ 1.012 to € 916). Routine labour EA resulted in more deliveries with maternal adverse effects, nevertheless the ICER remained low (€ 8; bootstrap 95% CI -€ 6.120 to € 8.659). The cost-effectiveness acceptability curve indicated a low probability that routine EA is cost-effective. Routine labour EA generates comparable costs as analgesia on request, but results in more operative deliveries and more EA-related maternal adverse effects. Based on cost-effectiveness, no preference can be given to routine labour EA as compared with analgesia on request. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Orbital Spacecraft Consumables Resupply System (OSCRS). Volume 3: Program Cost Estimate

NASA Technical Reports Server (NTRS)

Perry, D. L.

1986-01-01

A cost analysis for the design, development, qualification, and production of the monopropellant and bipropellant Orbital Spacecraft Consumable Resupply System (OSCRS) tankers, their associated avionics located in the Orbiter payload bay, and the unique ground support equipment (GSE) and airborne support equipment (ASE) required to support operations is presented. Monopropellant resupply for the Gamma Ray Observatory (GRO) in calendar year 1991 is the first defined resupply mission with bipropellant resupply missions expected in the early to mid 1990's. The monopropellant program estimate also includes contractor costs associated with operations support through the first GRO resupply mission.

Feasibility of Federal assistance for urban mass transportation operating costs

DOT National Transportation Integrated Search

1971-11-01

The contents of the report include the present financial and operating condition of urban mass transportation; the present financial assistance programs for urban mass transportation; an analysis of alternative federal assistance programs; and the se...

Foreword for the Special Section on Power System Planning and Operation Towards a Low-Carbon Economy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ding, Yi; Kang, Chongqing; Wang, Jianhui

2015-03-01

The nine papers in this special section on power system planning and operation towards a low-cost economy cover the following topics: power system planning models; power system operation methods and market behavior analysis; and risk assessment and emission management.

Costs and benefits of different methods of esophagectomy for esophageal cancer.

PubMed

Yanasoot, Alongkorn; Yolsuriyanwong, Kamtorn; Ruangsin, Sakchai; Laohawiriyakamol, Supparerk; Sunpaweravong, Somkiat

2017-01-01

Background A minimally invasive approach to esophagectomy is being used increasingly, but concerns remain regarding the feasibility, safety, cost, and outcomes. We performed an analysis of the costs and benefits of minimally invasive, hybrid, and open esophagectomy approaches for esophageal cancer surgery. Methods The data of 83 consecutive patients who underwent a McKeown's esophagectomy at Prince of Songkla University Hospital between January 2008 and December 2014 were analyzed. Open esophagectomy was performed in 54 patients, minimally invasive esophagectomy in 13, and hybrid esophagectomy in 16. There were no differences in patient characteristics among the 3 groups Minimally invasive esophagectomy was undertaken via a thoracoscopic-laparoscopic approach, hybrid esophagectomy via a thoracoscopic-laparotomy approach, and open esophagectomy by a thoracotomy-laparotomy approach. Results Minimally invasive esophagectomy required a longer operative time than hybrid or open esophagectomy ( p = 0.02), but these patients reported less postoperative pain ( p = 0.01). There were no significant differences in blood loss, intensive care unit stay, hospital stay, or postoperative complications among the 3 groups. Minimally invasive esophagectomy incurred higher operative and surgical material costs than hybrid or open esophagectomy ( p = 0.01), but there were no significant differences in inpatient care and total hospital costs. Conclusion Minimally invasive esophagectomy resulted in the least postoperative pain but the greatest operative cost and longest operative time. Open esophagectomy was associated with the lowest operative cost and shortest operative time but the most postoperative pain. Hybrid esophagectomy had a shorter learning curve while sharing the advantages of minimally invasive esophagectomy.

Cost analysis of open radical cystectomy versus robot-assisted radical cystectomy.

PubMed

Bansal, Sukhchain S; Dogra, Tara; Smith, Peter W; Amran, Maisarah; Auluck, Ishna; Bhambra, Maninder; Sura, Manraj S; Rowe, Edward; Koupparis, Anthony

2018-03-01

To perform a cost analysis comparing the cost of robot-assisted radical cystectomy (RARC) with open RC (ORC) in a UK tertiary referral centre and to identify the key cost drivers. Data on hospital length of stay (LOS), operative time (OT), transfusion rate, and volume and complication rate were obtained from a prospectively updated institutional database for patients undergoing RARC or ORC. A cost decision tree model was created. Sensitivity analysis was performed to find key drivers of overall cost and to find breakeven points with ORC. Monte Carlo analysis was performed to quantify the variability in the dataset. One RARC procedure costs £12 449.87, or £12 106.12 if the robot was donated via charitable funds. In comparison, one ORC procedure costs £10 474.54. RARC is 18.9% more expensive than ORC. The key cost drivers were OT, LOS, and the number of cases performed per annum. High ongoing equipment costs remain a large barrier to the cost of RARC falling. However, minimal improvements in patient quality of life would be required to offset this difference. © 2017 The Authors BJU International © 2017 BJU International Published by John Wiley & Sons Ltd.

Benchmark Production Scheduling Problems for Job Shops with Interactive Constraints

DTIC Science & Technology

1993-09-01

Goldratt has stated that cost accounting is the number one enemy of productivity (Goldratt and Cox, 1992). Why does he believe this? Cost accounting ...28). This incorrect emphasis can lead managers to make improper decisions. For example, traditional analysis based on cost accounting may lead to...measures (Goldratt and Fox, 1986:28). Global Operational Measures As opposed to measuring each individual process station against cost accounting

Autonomous Aerobraking Using Thermal Response Surface Analysis

NASA Technical Reports Server (NTRS)

Prince, Jill L.; Dec, John A.; Tolson, Robert H.

2007-01-01

Aerobraking is a proven method of significantly increasing the science payload that can be placed into low Mars orbits when compared to an all propulsive capture. However, the aerobraking phase is long and has mission cost and risk implications. The main cost benefit is that aerobraking permits the use of a smaller and cheaper launch vehicle, but additional operational costs are incurred during the long aerobraking phase. Risk is increased due to the repeated thermal loading of spacecraft components and the multiple attitude and propulsive maneuvers required for successful aerobraking. Both the cost and risk burdens can be significantly reduced by automating the aerobraking operations phase. All of the previous Mars orbiter missions that have utilized aerobraking have increasingly relied on onboard calculations during aerobraking. Even though the temperature of spacecraft components has been the limiting factor, operational methods have relied on using a surrogate variable for mission control. This paper describes several methods, based directly on spacecraft component maximum temperature, for autonomously predicting the subsequent aerobraking orbits and prescribing apoapsis propulsive maneuvers to maintain the spacecraft within specified temperature limits. Specifically, this paper describes the use of thermal response surface analysis in predicting the temperature of the spacecraft components and the corresponding uncertainty in this temperature prediction.

Digital Avionics Information System (DAIS): Training Requirements Analysis Model Users Guide. Final Report.

ERIC Educational Resources Information Center

Czuchry, Andrew J.; And Others

This user's guide describes the functions, logical operations and subroutines, input data requirements, and available outputs of the Training Requirements Analysis Model (TRAMOD), a computerized analytical life cycle cost modeling system for use in the early stages of system design. Operable in a stand-alone mode, TRAMOD can be used for the…

Economic modeling of fault tolerant flight control systems in commercial applications

NASA Technical Reports Server (NTRS)

Finelli, G. B.

1982-01-01

This paper describes the current development of a comprehensive model which will supply the assessment and analysis capability to investigate the economic viability of Fault Tolerant Flight Control Systems (FTFCS) for commercial aircraft of the 1990's and beyond. An introduction to the unique attributes of fault tolerance and how they will influence aircraft operations and consequent airline costs and benefits is presented. Specific modeling issues and elements necessary for accurate assessment of all costs affected by ownership and operation of FTFCS are delineated. Trade-off factors are presented, aimed at exposing economically optimal realizations of system implementations, resource allocation, and operating policies. A trade-off example is furnished to graphically display some of the analysis capabilities of the comprehensive simulation model now being developed.

Robotic longitudinal pancreaticojejunostomy for chronic pancreatitis: Comparison of clinical outcomes and cost to the open approach.

PubMed

Kirks, Russell C; Lorimer, Patrick D; Fruscione, Michael; Cochran, Allyson; Baker, Erin H; Iannitti, David A; Vrochides, Dionisios; Martinie, John B

2017-09-01

This study compares clinical and cost outcomes of robot-assisted laparoscopic (RAL) and open longitudinal pancreaticojejunostomy (LPJ) for chronic pancreatitis. Clinical and cost data were retrospectively compared between open and RAL LPJ performed at a single center from 2008-2015. Twenty-six patients underwent LPJ: 19 open and 7 RAL. Two robot-assisted cases converted to open were included in the open group for analysis. Patients undergoing RAL LPJ had less intraoperative blood loss, a shorter surgical length of stay, and lower medication costs. Operation supply cost was higher in the RAL group. No difference in hospitalization cost was found. Versus the open approach, RAL LPJ performed for chronic pancreatitis shortens hospitalization and reduces medication costs; hospitalization costs are equivalent. A higher operative cost for RAL LPJ is mitigated by a shorter hospitalization. Decreased morbidity and healthcare resource economy support use of the robotic approach for LPJ when appropriate. Copyright © 2017 John Wiley & Sons, Ltd.

Cost, Emissions, and Customer Service Trade-Off Analysis In Pickup and Delivery Systems.

DOT National Transportation Integrated Search

2011-05-01

This research offers a novel formulation for including emissions into fleet assignment and vehicle routing, and for the : trade-offs faced by fleet operators between cost, emissions, and service quality. This approach enables evaluation of : the impa...

INTEGRATED BIOPROCESS SYSTEMS FOR LOW-COST ENVIRONMENTAL REMEDIATION AND SUSTAINABLE BIOFERTILIZER PRODUCTION

EPA Science Inventory

Preliminary techno-economic analysis of these processes will be undertaken, utilizing the literature and including key supporting data and proof-of-principle experiments. The emphasis on low-cost bioreactors and operation greatly enhances the economic feasibility and practica...

Balancing low cost with reliable operation in the rotordynamic design of the ALS Liquid Hydrogen Fuel Turbopump

NASA Technical Reports Server (NTRS)

Greenhill, L. M.

1990-01-01

The Air Force/NASA Advanced Launch System (ALS) Liquid Hydrogen Fuel Turbopump (FTP) has primary design goals of low cost and high reliability, with performance and weight having less importance. This approach is atypical compared with other rocket engine turbopump design efforts, such as on the Space Shuttle Main Engine (SSME), which emphasized high performance and low weight. Similar to the SSME turbopumps, the ALS FTP operates supercritically, which implies that stability and bearing loads strongly influence the design. In addition, the use of low cost/high reliability features in the ALS FTP such as hydrostatic bearings, relaxed seal clearances, and unshrouded turbine blades also have a negative influence on rotordynamics. This paper discusses the analysis conducted to achieve a balance between low cost and acceptable rotordynamic behavior, to ensure that the ALS FTP will operate reliably without subsynchronous instabilities or excessive bearing loads.

Study of the cost/benefit tradeoffs for reducing the energy consumption of the commercial air transportation system

NASA Technical Reports Server (NTRS)

Hopkins, J. P.

1976-01-01

Practical means were assessed for achieving reduced fuel consumption in commercial air transportation. Five areas were investigated: current aircraft types, revised operational procedures, modifications to current aircraft, derivatives of current aircraft and new near-term fuel conservative aircraft. As part of a multiparticipant coordinated effort, detailed performance and operating cost data in each of these areas were supplied to the contractor responsible for the overall analysis of the cost/benefit tradeoffs for reducing the energy consumption of the domestic commercial air transportation system. A follow-on study was performed to assess the potential of an advanced turboprop transport aircraft concept. To provide a valid basis for comparison, an equivalent turbofan transport aircraft concept incorporating equal technology levels was also derived. The aircraft as compared on the basis of weight, size, fuel utilization, operational characteristics and costs.

Opportunity cost based analysis of corporate eco-efficiency: a methodology and its application to the CO2-efficiency of German companies.

PubMed

Hahn, Tobias; Figge, Frank; Liesen, Andrea; Barkemeyer, Ralf

2010-10-01

In this paper, we propose the return-to-cost-ratio (RCR) as an alternative approach to the analysis of operational eco-efficiency of companies based on the notion of opportunity costs. RCR helps to overcome two fundamental deficits of existing approaches to eco-efficiency. (1) It translates eco-efficiency into managerial terms by applying the well-established notion of opportunity costs to eco-efficiency analysis. (2) RCR allows to identify and quantify the drivers behind changes in corporate eco-efficiency. RCR is applied to the analysis of the CO(2)-efficiency of German companies in order to illustrate its usefulness for a detailed analysis of changes in corporate eco-efficiency as well as for the development of effective environmental strategies. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Reference Model 5 (RM5): Oscillating Surge Wave Energy Converter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Y. H.; Jenne, D. S.; Thresher, R.

This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter (OSWEC) reference model design in a complementary manner to Reference Models 1-4 contained in the above report. A conceptual design for a taut moored oscillating surge wave energy converter was developed. The design had an annual electrical power of 108 kilowatts (kW), rated power of 360 kW, and intended deployment at water depths between 50 m and 100 m. The study includes structural analysis, power output estimation, a hydraulic power conversionmore » chain system, and mooring designs. The results were used to estimate device capital cost and annual operation and maintenance costs. The device performance and costs were used for the economic analysis, following the methodology presented in SAND2013-9040 that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays up to 100 devices. The levelized cost of energy estimated for the Reference Model 5 OSWEC, presented in this report, was for a single device and arrays of 10, 50, and 100 units, and it enabled the economic analysis to account for cost reductions associated with economies of scale. The baseline commercial levelized cost of energy estimate for the Reference Model 5 device in an array comprised of 10 units is $1.44/kilowatt-hour (kWh), and the value drops to approximately $0.69/kWh for an array of 100 units.« less

A Cost-Effectiveness Analysis of Blended Versus Face-to-Face Delivery of Evidence-Based Medicine to Medical Students.

PubMed

Maloney, Stephen; Nicklen, Peter; Rivers, George; Foo, Jonathan; Ooi, Ying Ying; Reeves, Scott; Walsh, Kieran; Ilic, Dragan

2015-07-21

Blended learning describes a combination of teaching methods, often utilizing digital technologies. Research suggests that learner outcomes can be improved through some blended learning formats. However, the cost-effectiveness of delivering blended learning is unclear. This study aimed to determine the cost-effectiveness of a face-to-face learning and blended learning approach for evidence-based medicine training within a medical program. The economic evaluation was conducted as part of a randomized controlled trial (RCT) comparing the evidence-based medicine (EBM) competency of medical students who participated in two different modes of education delivery. In the traditional face-to-face method, students received ten 2-hour classes. In the blended learning approach, students received the same total face-to-face hours but with different activities and additional online and mobile learning. Online activities utilized YouTube and a library guide indexing electronic databases, guides, and books. Mobile learning involved self-directed interactions with patients in their regular clinical placements. The attribution and differentiation of costs between the interventions within the RCT was measured in conjunction with measured outcomes of effectiveness. An incremental cost-effectiveness ratio was calculated comparing the ongoing operation costs of each method with the level of EBM proficiency achieved. Present value analysis was used to calculate the break-even point considering the transition cost and the difference in ongoing operation cost. The incremental cost-effectiveness ratio indicated that it costs 24% less to educate a student to the same level of EBM competency via the blended learning approach used in the study, when excluding transition costs. The sunk cost of approximately AUD $40,000 to transition to the blended model exceeds any savings from using the approach within the first year of its implementation; however, a break-even point is achieved within its third iteration and relative savings in the subsequent years. The sensitivity analysis indicates that approaches with higher transition costs, or staffing requirements over that of a traditional method, are likely to result in negative value propositions. Under the study conditions, a blended learning approach was more cost-effective to operate and resulted in improved value for the institution after the third year iteration, when compared to the traditional face-to-face model. The wider applicability of the findings are dependent on the type of blended learning utilized, staffing expertise, and educational context.

Economics of installation of solar heating plants

NASA Astrophysics Data System (ADS)

Popel, O. S.; Frid, S. Y.; Shpiltayn, E. E.

1984-04-01

An engineering-economic analysis of solar heating plants for determination of their cost effectiveness involves calculating the maximum economically feasibile extra capital investment on their installation and calculating the fraction of the total heat demand covered by such a plant which makes replacement of conventional heating plant maximally economical. The annual economic effect of solar heating is calculated in terms of normalized cost differential, as criterion for its competitiveness with conventional heating. Plant performance characteristics, namely dependence of both the percent demand coverage and the annual cost differential on the area of solar radiation collectors is then considered. Analysis of the cost equation, assuming that the extra fixed cost is proportional to the collector area, reveals the necessary and sufficient condition for decrease of annual operating cost.

A cost-effective analysis of fibrin sealants versus no sealant following open right hemihepatectomy for colorectal liver metastases.

PubMed

Pandanaboyana, Sanjay; Bell, Richard; Shah, Nehal; Lodge, J Peter A; Hidalgo, Ernest; Toogood, Giles J; Prasad, K Raj

2017-06-01

There is paucity of data regarding the cost-effectiveness of fibrin sealants during liver surgery. This study aimed to assess the cost-effectiveness of fibrin sealants following right hemihepatectomy for colorectal liver metastases. A prospectively maintained database between 2004 and 2013 was reviewed to identify patients who underwent a right hemihepatectomy with and without fibrin sealant application. Perioperative and post-operative outcomes were analysed to assess its cost-effectiveness. One hundred and sixty-three right hemihepatectomies were performed, of which 79 were in the fibrin sealant treatment group and 84 were in the no sealant group. No difference was seen between fibrin sealant and no sealant with regard to bile leak (P = 0.366), intra-abdominal collections (P = 0.200) and overall post-operative complications (P = 0.480). Operating costs were significantly cheaper in the no sealant group (P = 0.010). There was no difference seen in median post-operative stay between fibrin sealant versus no treatment (8 versus 9 days, P = 0.327), median total bed cost (£3900 versus £4300, P = 0.400), mean transfusion cost per patient (P = 0.201) and overall cost (£6706.15 versus £6555.80, P = 0.792). Fibrin sealant application to cut surface during liver surgery confers no cost benefit and their routine use may not be recommended. © 2014 Royal Australasian College of Surgeons.

Thermodynamic analysis of energy density in pressure retarded osmosis: The impact of solution volumes and costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reimund, Kevin K.; McCutcheon, Jeffrey R.; Wilson, Aaron D.

A general method was developed for estimating the volumetric energy efficiency of pressure retarded osmosis via pressure-volume analysis of a membrane process. The resulting model requires only the osmotic pressure, π, and mass fraction, w, of water in the concentrated and dilute feed solutions to estimate the maximum achievable specific energy density, uu, as a function of operating pressure. The model is independent of any membrane or module properties. This method utilizes equilibrium analysis to specify the volumetric mixing fraction of concentrated and dilute solution as a function of operating pressure, and provides results for the total volumetric energy densitymore » of similar order to more complex models for the mixing of seawater and riverwater. Within the framework of this analysis, the total volumetric energy density is maximized, for an idealized case, when the operating pressure is π/(1+√w⁻¹), which is lower than the maximum power density operating pressure, Δπ/2, derived elsewhere, and is a function of the solute osmotic pressure at a given mass fraction. It was also found that a minimum 1.45 kmol of ideal solute is required to produce 1 kWh of energy while a system operating at “maximum power density operating pressure” requires at least 2.9 kmol. Utilizing this methodology, it is possible to examine the effects of volumetric solution cost, operation of a module at various pressure, and operation of a constant pressure module with various feed.« less

Costs of Clostridium difficile infection in pediatric operations: A propensity score-matching analysis.

PubMed

Kulaylat, Afif N; Rocourt, Dorothy V; Podany, Abigail B; Engbrecht, Brett W; Twilley, Marianne; Santos, Mary C; Cilley, Robert E; Hollenbeak, Christopher S; Dillon, Peter W

2017-05-01

The purpose of this analysis was to assess the burden of Clostridium difficile infection in the hospitalized pediatric surgical population and to characterize its influence on the costs of care. There were 313,664 patients age 1-18 years who underwent a general thoracic or abdominal procedure in the Kids' Inpatient Database during 2003, 2006, 2009, and 2012. Logistic regression was used to model factors associated with the development of C difficile infection. A propensity score-matching analysis was performed to evaluate the influence of C difficile infection on mortality, duration of stay, and costs in similar patient cohorts. Population weights were used to estimate the national excess burden of C difficile infection on these outcomes. The overall prevalence of C difficile infection in the sampled cohort was 0.30%, with an increasing trend of C difficile infection over time in non-children's hospitals (P < .001). C difficile infection was associated with younger age, nonelective procedures, increasing comorbidities, and urban teaching hospital status (P < .001). An estimated 1,438 children developed C difficile infection after operation. After propensity score matching, the mean excess duration of stay and costs attributable to C difficile infection were 5.8 days and $12,801 (P < .001), accounting for 8,295 days spent in the hospital and $18.4 million (2012 USD) in spending annually. C difficile infection is a relatively uncommon but costly complication after pediatric operative procedures. Given the increasing trend of C difficile infection among hospitalized surgical patients, there is substantial opportunity for reduction of inpatient burden and associated costs in this potentially preventable nosocomial infection. Copyright © 2016 Elsevier Inc. All rights reserved.

Time-driven activity based costing of total knee replacement surgery at a London teaching hospital.

PubMed

Chen, Alvin; Sabharwal, Sanjeeve; Akhtar, Kashif; Makaram, Navnit; Gupte, Chinmay M

2015-12-01

The aim of this study was to conduct a time-driven activity based costing (TDABC) analysis of the clinical pathway for total knee replacement (TKR) and to determine where the major cost drivers lay. The in-patient pathway was prospectively mapped utilising a TDABC model, following 20 TKRs. The mean age for these patients was 73.4 years. All patients were ASA grade I or II and their mean BMI was 30.4. The 14 varus knees had a mean deformity of 5.32° and the six valgus knee had a mean deformity of 10.83°. Timings were prospectively collected as each patient was followed through the TKR pathway. Pre-operative costs including pre-assessment and joint school were £ 163. Total staff costs for admission and the operating theatre were £ 658. Consumables cost for the operating theatre were £ 1862. The average length of stay was 5.25 days at a total cost of £ 910. Trust overheads contributed £ 1651. The overall institutional cost of a 'noncomplex' TKR in patients without substantial medical co-morbidities was estimated to be £ 5422, representing a profit of £ 1065 based on a best practice tariff of £ 6487. The major cost drivers in the TKR pathway were determined to be theatre consumables, corporate overheads, overall ward cost and operating theatre staffing costs. Appropriate discounting of implant costs, reduction in length of stay by adopting an enhanced recovery programme and control of corporate overheads through the use of elective orthopaedic treatment centres are proposed approaches for reducing the overall cost of treatment. Copyright © 2015 Elsevier B.V. All rights reserved.

Shuttle user analysis (study 2.2). Volume 3: Business risk and value of operations in space (BRAVO). Part 5: Analysis of GSFC Earth Observation Satellite (EOS) system mission model using BRAVO techniques

NASA Technical Reports Server (NTRS)

1975-01-01

Cost comparisons were made between three modes of operation (expend, ground refurbish, and space resupply) for the Earth Observation System (EOS-B) to furnish data to NASA on alternative ways to use the shuttle/EOS. Results of the analysis are presented in tabular form.

Economic Evaluation of Telemedicine for Patients in ICUs.

PubMed

Yoo, Byung-Kwang; Kim, Minchul; Sasaki, Tomoko; Melnikow, Joy; Marcin, James P

2016-02-01

Despite telemedicine's potential to improve patients' health outcomes and reduce costs in the ICU, hospitals have been slow to introduce telemedicine in the ICU due to high up-front costs and mixed evidence on effectiveness. This study's first aim was to conduct a cost-effectiveness analysis to estimate the incremental cost-effectiveness ratio of telemedicine in the ICU, compared with ICU without telemedicine, from the healthcare system perspective. The second aim was to examine potential cost saving of telemedicine in the ICU through probabilistic analyses and break-even analyses. Simulation analyses performed by standard decision models. Hypothetical ICU defined by the U.S. literature. Hypothetical adult patients in ICU defined by the U.S. literature. The intervention was the introduction of telemedicine in the ICU, which was assumed to affect per-patient per-hospital-stay ICU cost and hospital mortality. Telemedicine in the ICU operation costs included the telemedicine equipment-installation (start-up) costs with 5-year depreciation, maintenance costs, and clinician staffing costs. Telemedicine in the ICU effectiveness was measured by cumulative quality-adjusted life years for 5 years after ICU discharge. The base case cost-effectiveness analysis estimated telemedicine in the ICU to extend 0.011 quality-adjusted life years with an incremental cost of $516 per patient compared with ICU without telemedicine, resulting in an incremental cost-effectiveness ratio of $45,320 per additional quality-adjusted life year (= $516/0.011). The probabilistic cost-effectiveness analysis estimated an incremental cost-effectiveness ratio of $50,265 with a wide 95% CI from a negative value (suggesting cost savings) to $375,870. These probabilistic analyses projected that cost saving is achieved 37% of 1,000 iterations. Cost saving is also feasible if the per-patient per-hospital-stay operational cost and physician cost were less than $422 and less than $155, respectively, based on break-even analyses. Our analyses suggest that telemedicine in the ICU is cost-effective in most cases and cost saving in some cases. The thresholds of cost and effectiveness, estimated by break-even analyses, help hospitals determine the impact of telemedicine in the ICU and potential cost saving.

Development of a toolkit for cost-benefit analysis of specific winter maintenance practices, equipment and operations.

DOT National Transportation Integrated Search

2010-11-01

The operators and maintainers of highway networks are facing increasing demands and : customer expectations regarding mobility and transportation safety during inclement weather, : while confronting budget and staffing constraints and environmental c...

Economics of small fully reusable launch systems (SSTO vs. TSTO)

NASA Astrophysics Data System (ADS)

Koelle, Dietrich E.

1997-01-01

The paper presents a design and cost comparison of an SSTO vehicle concept with two TSTO vehicle options. It is shown that the ballistic SSTO concept feasibility is NOT a subject of technology but of proper vehicle SIZING. This also allows to design for sufficient performance margin. The cost analysis has been performed with the TRANSCOST- Model, also using the "Standardized Cost per Flight" definition for the CpF comparison. The results show that a present-technology SSTO for LEO missions is about 30 % less expensive than any TSTO vehicle, based on Life-Cycle-Cost analysis, in addition to the inherent operational/ reliability advantages of a single-stage vehicle. In case of a commercial development and operation it is estimated that an SSTO vehicle with 400 Mg propellant mass can be flown for some 9 Million per mission (94/95) with 14 Mg payload to LEO, 7 Mg to the Space Station Orbit, or 2 Mg to a 200/800 km polar orbit. This means specific transportation cost of 650 /kg (300 $/lb), resp.3.2 MYr/Mg, to LEO which is 6 -10% of present expendable launch vehicles.

Impact on public hospitals if private health insurance rates in Victoria declined.

PubMed

Hanning, Brian W T

2004-12-13

The additional cost of treating acute care type Victorian private patients as public patients in Victorian public hospitals based on the current public sector payment model and rates was calculated, as was the loss of health fund income to public hospitals. If all private cases became public the net recurrent cost would be $1.05 billion assuming all patients were still treated. If private health insurance (PHI) uptake had declined to 23.3% as was projected without Lifetime Health Cover and the 30% rebate, the additional operating cost and income loss would be $385 million. This compares to the Victorian cost of the 30% rebate for acute hospital cases of $383 million. This takes no account of capital costs and possible public sector access problems. The analysis suggests that 31 extra operating theatres would be needed in the public sector (had the transfer of surgical patients from the public sector to the private sector not occurred). This analysis suggests that without the PHI rebate the current stresses on Victorian public hospitals would be increased, not decreased.

Analysis of operating costs for producing biodiesel from palm oil at pilot-scale in Colombia.

PubMed

Acevedo, Juan C; Hernández, Jorge A; Valdés, Carlos F; Khanal, Samir Kumar

2015-01-01

The present study aims to evaluate the operating costs of biodiesel production using palm oil in a pilot-scale plant with a capacity of 20,000 L/day (850 L/batch). The production plant uses crude palm oil as a feedstock, and methanol in a molar ratio of 1:10. The process incorporated acid esterification, basic transesterification, and dry washing with absorbent powder. Production costs considered in the analysis were feedstock, supplies, labor, electricity, quality and maintenance; amounting to $3.75/gal ($0.99/L) for 2013. Feedstocks required for biodiesel production were among the highest costs, namely 72.6% of total production cost. Process efficiency to convert fatty acids to biodiesel was over 99% and generated a profit of $1.08/gal (i.e., >22% of the total income). According to sensitivity analyses, it is more economically viable for biodiesel production processes to use crude palm oil as a feedstock and take advantage of the byproducts such as glycerine and fertilizers. Copyright © 2015 Elsevier Ltd. All rights reserved.

DORCA computer program. Volume 1: User's guide

NASA Technical Reports Server (NTRS)

Wray, S. T., Jr.

1971-01-01

The Dynamic Operational Requirements and Cost Analysis Program (DORCA) was written to provide a top level analysis tool for NASA. DORCA relies on a man-machine interaction to optimize results based on external criteria. DORCA relies heavily on outside sources to provide cost information and vehicle performance parameters as the program does not determine these quantities but rather uses them. Given data describing missions, vehicles, payloads, containers, space facilities, schedules, cost values and costing procedures, the program computes flight schedules, cargo manifests, vehicle fleet requirements, acquisition schedules and cost summaries. The program is designed to consider the Earth Orbit, Lunar, Interplanetary and Automated Satellite Programs. A general outline of the capabilities of the program are provided.

Total systems design analysis of high performance structures

NASA Technical Reports Server (NTRS)

Verderaime, V.

1993-01-01

Designer-control parameters were identified at interdiscipline interfaces to optimize structural systems performance and downstream development and operations with reliability and least life-cycle cost. Interface tasks and iterations are tracked through a matrix of performance disciplines integration versus manufacturing, verification, and operations interactions for a total system design analysis. Performance integration tasks include shapes, sizes, environments, and materials. Integrity integrating tasks are reliability and recurring structural costs. Significant interface designer control parameters were noted as shapes, dimensions, probability range factors, and cost. Structural failure concept is presented, and first-order reliability and deterministic methods, benefits, and limitations are discussed. A deterministic reliability technique combining benefits of both is proposed for static structures which is also timely and economically verifiable. Though launch vehicle environments were primarily considered, the system design process is applicable to any surface system using its own unique filed environments.

Saugus River and Tributaries Flood Damage Reduction Study: Lynn, Malden, Revere and Saugus, Massachusetts. Section 1. Feasibility Report.

DTIC Science & Technology

1989-12-01

57 Table 5 Sensitivity Analysis - Point of Pines LPP 61 Table 6 Plan Comparison 64 Table 7 NED Plan Project Costs 96 Table 8 Estimated Operation...Costs 99 Table 13 Selected Plan/Estimated Annual Benefits 101 Table 14 Comparative Impacts - NED Regional Floodgate Plan 102 Table 15 Economic Analysis ...Includes detailed descriptions, plans and profiles and design considerations of the selected plan; coastal analysis of the shorefront; detailed project

Peritonectomy and hyperthermic intraperitoneal chemotherapy: cost analysis and sustainability.

PubMed

Bagnoli, Pietro F; Cananzi, F C M; Brocchi, A; Ardito, A; Strada, D; Cozzaglio, L; Mussi, C; Brusa, S; Carlino, C; Borrelli, B; Alemanno, F; Quagliuolo, V

2015-03-01

Malignancies of the peritoneum remain a challenge in any hospital that accepts to manage them, due not only to difficulties associated with the complexity of the procedures involved but also the costs, which - in Italy and other countries that use a diagnosis-related group (DRG) system - are not adequately reimbursed. We analyzed data relative to 24 patients operated on between September 2010 and May 2013 with special regard to operating room expenditure, ICU stay, duration of hospitalization, and DRG reimbursement. The total costs per patient included clinical, operating room, procedure, pathology, imaging, ward care, allied healthcare, pharmaceutical, and ICU costs. Postoperative hospital stay, drugs and materials, and operating room occupancy were the main factors affecting the expenditure for cytoreductive surgery and hyperthermic intraperitoneal chemotherapy. We had a median hospitalization of 14 days, median ICU stay of 2.4 days, and median operating room occupancy of 585 min. The median expenditure for each case was € 21,744; the median reimbursement by the national health system € 8,375. In a DRG reimbursement system, the economic effort in the management of patients undergoing peritonectomy procedures may not be counterbalanced by adequate reimbursement. Joint efforts between medical and administration parties are mandatory to develop appropriate treatment protocols and keep down the costs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cost/benefit tradeoffs for reducing the energy consumption of the commercial air transportation system. Volume 1: Technical analysis

NASA Technical Reports Server (NTRS)

Kraus, E. F.

1976-01-01

The effectiveness and associated costs of operational and technical options for reduced fuel consumption by Douglas aircraft in the domestic airline fleet are assessed. Areas explored include alternative procedures for airline and flight operations, advanced and state of the art technology, modification and derivative configurations, new near-term aircraft, turboprop configuration studies, and optimum aircraft geometry. Data for each aircraft studied is presented in tables and graphs.

U.S. healthcare fix: leveraging the lessons from the food supply chain.

PubMed

Kumar, Sameer; Blair, John T

2013-01-01

U.S. healthcare costs consistently outpace inflation, causing growing problems of affordability. This trend cannot be sustained indefinitely. The purpose of this study is to use supply-chain tools for macro-level examination of the U.S. healthcare as a business system and identify options and best use practices. We compare the important and successful U.S. food industry to the essential but problematic U.S. healthcare industry. Supply chain strategies leading to food business operations success are examined and healthcare applications suggested. We emphasize "total cost of ownership" which includes all costs incurred by all stakeholders of U.S. healthcare, including maintenance and cleanup, not just the initial purchase price. U.S. hospitals and clinics can use supply chain strategies in a total cost of ownership framework to reduce healthcare costs while maintaining patient care quality. Supply chain strategies of resource pooling, mass customization, centralized logistics, specialization, postponement and continuous improvement that have been successfully used in the U.S. food industry should be more widely applied to the U.S. healthcare industry. New and growing areas of telemedicine and medical tourism should be included in the supply chain analysis of U.S. healthcare. Valid statistical analysis of results in all areas of U.S. healthcare is an important part of the process. U.S. healthcare industry problems are systematic operational and supply chain problems rather than problems with workforce or technology. Examination of the U.S. healthcare industry through a supply chain framework should lead to significant operational improvement in both prevention and treatment of acute and chronic ailments. A rational and unemotional reorganization of the U.S. healthcare system operations, using supply chain strategies, should help reduce healthcare costs while maintaining quality and increasing accessibility.

Analysis of a combined heating and cooling system model under different operating strategies

NASA Astrophysics Data System (ADS)

Dzierzgowski, Mieczysław; Zwierzchowski, Ryszard

2017-11-01

The paper presents an analysis of a combined heating and cooling system model under different operating strategies. Cooling demand for air conditioning purposes has grown steadily in Poland since the early 1990s. The main clients are large office buildings and shopping malls in downtown locations. Increased demand for heat in the summer would mitigate a number of problems regarding District Heating System (DHS) operation at minimum power, affecting the average annual price of heat (in summertime the share of costs related to transport losses is a strong cost factor). In the paper, computer simulations were performed for different supply network water temperature, assuming as input, real changes in the parameters of the DHS (heat demand, flow rates, etc.). On the basis of calculations and taking into account investment costs of the Absorption Refrigeration System (ARS) and the Thermal Energy Storage (TES) system, an optimal capacity of the TES system was proposed to ensure smooth and efficient operation of the District Heating Plant (DHP). Application of ARS with the TES system in the DHS in question increases net profit by 19.4%, reducing the cooling price for consumers by 40%.

The new economics of radical prostatectomy: cost comparison of open, laparoscopic and robot assisted techniques.

PubMed

Lotan, Yair; Cadeddu, Jeffrey A; Gettman, Matthew T

2004-10-01

We evaluated the costs components of laparoscopic (LRP) and robot assisted prostatectomy (RAP), and compared their costs to those of open radical retropubic prostatectomy (RRP). A model was created using commercially available software to compare the costs of treatment with LRP, RAP or RRP. Hospital costs were obtained from a large county hospital. A literature search was performed to determine typical (average) robot costs, length of stay and operative time for RRP, LRP and RAP. We limited our analysis to mature series and included only the most recent efforts. The cost of the robot was estimated at 1,200,000 dollars with a 100,000 dollars yearly maintenance contract. It was assumed that the robot would be used across specialities for a total of 300 cases yearly in a 7-year period. We performed a series of 1 and 2-way sensitivity analyses to evaluate the costs of LRP, RAP and RRP, while varying robot costs, the number of robotic cases, hospital length of stay, operative time and cost of laparoscopic/robotic equipment. RRP was the most cost-effective approach with a cost advantage of 487 dollars and 1,726 dollars over LRP and RAP, respectively. If we excluded the initial cost of purchasing a robot, the cost difference between RRP and RAP was 1,155 dollars. This large difference in RRP and RAP costs resulted from a cost of 857 dollars per case to pay for robot purchase and maintenance, and the high cost of 1,705 dollars for equipment per case. An even shorter RAP operative time (140 vs 160 minutes) and length of stay (1.2 vs 2.5 days) did not compensate for the added expenditure. LRP cost more than RRP primarily due to equipment costs (533 dollars) since the shorter hospital stay (1.3 vs 2.5 days) was compensated for by longer operative time (200 vs 160 minutes). The costs of new technology are typically borne out in the first years of use and RAP is no exception with high robot costs for purchase, maintenance and operative equipment overshadowing savings gained by shorter length of stay. While RRP is currently the least costly approach, LRP has proved to be almost as cost competitive as RRP, whereas RAP will require a significant decrease in the cost of the device and maintenance fees.

Electric/Hybrid Vehicle Simulation

NASA Technical Reports Server (NTRS)

Slusser, R. A.; Chapman, C. P.; Brennand, J. P.

1985-01-01

ELVEC computer program provides vehicle designer with simulation tool for detailed studies of electric and hybrid vehicle performance and cost. ELVEC simulates performance of user-specified electric or hybrid vehicle under user specified driving schedule profile or operating schedule. ELVEC performs vehicle design and life cycle cost analysis.

Direct cost comparison of minimally invasive punch technique versus traditional approaches for percutaneous bone anchored hearing devices.

PubMed

Sardiwalla, Yaeesh; Jufas, Nicholas; Morris, David P

2017-06-12

Minimally Invasive Ponto Surgery (MIPS) was recently described as a new technique to facilitate the placement of percutaneous bone anchored hearing devices. The procedure has resulted in a simplification of the surgical steps and a dramatic reduction in surgical time while maintaining excellent patient outcomes. Given these developments, our group sought to move the procedure from the main operating suite where they have traditionally been performed. This study aims to test the null hypothesis that MIPS and open approaches have the same direct costs for the implantation of percutaneous bone anchored hearing devices in a Canadian public hospital setting. A retrospective direct cost comparison of MIPS and open approaches for the implantation of bone conduction implants was conducted. Indirect and future costs were not included in the fiscal analysis. A simple cost comparison of the two approaches was made considering time, staff and equipment needs. All 12 operations were performed on adult patients from 2013 to 2016 by the same surgeon at a single hospital site. MIPS has a total mean reduction in cost of CAD$456.83 per operation from the hospital perspective when compared to open approaches. The average duration of the MIPS operation was 7 min, which is on average 61 min shorter compared with open approaches. The MIPS technique was more cost effective than traditional open approaches. This primarily reflects a direct consequence of a reduction in surgical time, with further contributions from reduced staffing and equipment costs. This simple, quick intervention proved to be feasible when performed outside the main operating room. A blister pack of required equipment could prove convenient and further reduce costs.

Economics of internal and external energy storage in solar power plant operation

NASA Technical Reports Server (NTRS)

Manvi, R.; Fujita, T.

1977-01-01

A simple approach is formulated to investigate the effect of energy storage on the bus-bar electrical energy cost of solar thermal power plants. Economic analysis based on this approach does not require detailed definition of a specific storage system. A wide spectrum of storage system candidates ranging from hot water to superconducting magnets can be studied based on total investment and a rough knowledge of energy in and out efficiencies. Preliminary analysis indicates that internal energy storage (thermal) schemes offer better opportunities for energy cost reduction than external energy storage (nonthermal) schemes for solar applications. Based on data and assumptions used in JPL evaluation studies, differential energy costs due to storage are presented for a 100 MWe solar power plant by varying the energy capacity. The simple approach presented in this paper provides useful insight regarding the operation of energy storage in solar power plant applications, while also indicating a range of design parameters where storage can be cost effective.

Extraterrestrial processing and manufacturing of large space systems, volume 2, chapters 7-14 and appendices

NASA Technical Reports Server (NTRS)

Miller, R. H.; Smith, D. B. S.

1979-01-01

Production and support equipment specifications are described for the space manufacturing facility (SMF). Defined production equipment includes electromagnetic pumps for liquid metal, metal alloying furnaces, die casters, electron beam welders and cutters, glass forming for structural elements, and rolling. A cost analysis is presented which includes the development, the aquisition of all SMF elements, initial operating cost, maintenance and logistics cost, cost of terrestrial materials, and transportation cost for each major element. Computer program listings and outputs are appended.

Cost analysis and the practicing radiologist/manager: an introduction to managerial accounting.

PubMed

Forman, H P; Yin, D

1996-06-01

Cost analysis is inherently one of the most tedious tasks falling on the shoulders of any manager. In today's world, whether in a service business such as radiology or medicine or in a product line such as car manufacturing, accurate cost analysis is critical to all aspects of management: marketing, competitive strategy, quality control, human resource management, accounting (financial), and operations management, to name but a few. This is a topic that we will explore with the intention of giving the radiologist/manager the understanding and the basic skills to use cost analysis efficiently, making sure that major financial decisions are being made with adequate cost information, and showing that cost accounting is really managerial accounting in that it pays little attention to the bottom line of financial statements but places much more emphasis on equipping managers with the information to determine budgets, prices, salaries, and incentives and influences capital budgeting decisions through an understanding of product profitability rather than firm profitability.

Reducing Operating Room Costs Through Real-Time Cost Information Feedback: A Pilot Study.

PubMed

Tabib, Christian H; Bahler, Clinton D; Hardacker, Thomas J; Ball, Kevin M; Sundaram, Chandru P

2015-08-01

To create a protocol for providing real-time operating room (OR) cost feedback to surgeons. We hypothesize that this protocol will reduce costs in a responsible way without sacrificing quality of care. All OR costs were obtained and recorded for robot-assisted partial nephrectomy and laparoscopic donor nephrectomy. Before the beginning of this project, costs pertaining to the 20 most recent cases were analyzed. Items were identified from previous cases as modifiable for replacement or omission. Timely feedback of total OR costs and cost of each item used was provided to the surgeon after each case, and costs were analyzed. A cost analysis of the robot-assisted partial nephrectomy before the washout period indicates expenditures of $5243.04 per case. Ten recommended modifiable items were found to have an average per case cost of $1229.33 representing 23.4% of the total cost. A postwashout period cost analysis found the total OR cost decreased by $899.67 (17.2%) because of changes directly related to the modifiable items. Therefore, 73.2% of the possible identified savings was realized. The same stepwise approach was applied to laparoscopic donor nephrectomies. The average total cost per case before the washout period was $3530.05 with $457.54 attributed to modifiable items. After the washout period, modifiable items costs were reduced by $289.73 (8.0%). No complications occurred in the donor nephrectomy cases while one postoperative complication occurred in the partial nephrectomy group. Providing surgeons with feedback related to OR costs may lead to a change in surgeon behavior and decreased overall costs. Further studies are needed to show equivalence in patient outcomes.

A simplified economic filter for open-pit mining and heap-leach recovery of copper in the United States

USGS Publications Warehouse

Long, Keith R.; Singer, Donald A.

2001-01-01

Determining the economic viability of mineral deposits of various sizes and grades is a critical task in all phases of mineral supply, from land-use management to mine development. This study evaluates two simple tools for estimating the economic viability of porphyry copper deposits mined by open-pit, heap-leach methods when only limited information on these deposits is available. These two methods are useful for evaluating deposits that either (1) are undiscovered deposits predicted by a mineral resource assessment, or (2) have been discovered but for which little data has been collected or released. The first tool uses ordinary least-squared regression analysis of cost and operating data from selected deposits to estimate a predictive relationship between mining rate, itself estimated from deposit size, and capital and operating costs. The second method uses cost models developed by the U.S. Bureau of Mines (Camm, 1991) updated using appropriate cost indices. We find that the cost model method works best for estimating capital costs and the empirical model works best for estimating operating costs for mines to be developed in the United States.

Life cycle cost modeling of conceptual space vehicles

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1993-01-01

This paper documents progress to date by the University of Dayton on the development of a life cycle cost model for use during the conceptual design of new launch vehicles and spacecraft. This research is being conducted under NASA Research Grant NAG-1-1327. This research effort changes the focus from that of the first two years in which a reliability and maintainability model was developed to the initial development of a life cycle cost model. Cost categories are initially patterned after NASA's three axis work breakdown structure consisting of a configuration axis (vehicle), a function axis, and a cost axis. The focus will be on operations and maintenance costs and other recurring costs. Secondary tasks performed concurrent with the development of the life cycle costing model include continual support and upgrade of the R&M model. The primary result of the completed research will be a methodology and a computer implementation of the methodology to provide for timely cost analysis in support of the conceptual design activities. The major objectives of this research are: to obtain and to develop improved methods for estimating manpower, spares, software and hardware costs, facilities costs, and other cost categories as identified by NASA personnel; to construct a life cycle cost model of a space transportation system for budget exercises and performance-cost trade-off analysis during the conceptual and development stages; to continue to support modifications and enhancements to the R&M model; and to continue to assist in the development of a simulation model to provide an integrated view of the operations and support of the proposed system.

Computer-Aided Surgical Simulation in Head and Neck Reconstruction: A Cost Comparison among Traditional, In-House, and Commercial Options.

PubMed

Li, Sean S; Copeland-Halperin, Libby R; Kaminsky, Alexander J; Li, Jihui; Lodhi, Fahad K; Miraliakbari, Reza

2018-06-01

 Computer-aided surgical simulation (CASS) has redefined surgery, improved precision and reduced the reliance on intraoperative trial-and-error manipulations. CASS is provided by third-party services; however, it may be cost-effective for some hospitals to develop in-house programs. This study provides the first cost analysis comparison among traditional (no CASS), commercial CASS, and in-house CASS for head and neck reconstruction.  The costs of three-dimensional (3D) pre-operative planning for mandibular and maxillary reconstructions were obtained from an in-house CASS program at our large tertiary care hospital in Northern Virginia, as well as a commercial provider (Synthes, Paoli, PA). A cost comparison was performed among these modalities and extrapolated in-house CASS costs were derived. The calculations were based on estimated CASS use with cost structures similar to our institution and sunk costs were amortized over 10 years.  Average operating room time was estimated at 10 hours, with an average of 2 hours saved with CASS. The hourly cost to the hospital for the operating room (including anesthesia and other ancillary costs) was estimated at $4,614/hour. Per case, traditional cases were $46,140, commercial CASS cases were $40,951, and in-house CASS cases were $38,212. Annual in-house CASS costs were $39,590.  CASS reduced operating room time, likely due to improved efficiency and accuracy. Our data demonstrate that hospitals with similar cost structure as ours, performing greater than 27 cases of 3D head and neck reconstructions per year can see a financial benefit from developing an in-house CASS program. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Scale Matters: A Cost-Outcome Analysis of an m-Health Intervention in Malawi.

PubMed

Larsen-Cooper, Erin; Bancroft, Emily; Rajagopal, Sharanya; O'Toole, Maggie; Levin, Ann

2016-04-01

The primary objectives of this study are to determine cost per user and cost per contact with users of a mobile health (m-health) intervention. The secondary objectives are to map costs to changes in maternal, newborn, and child health (MNCH) and to estimate costs of alternate implementation and usage scenarios. A base cost model, constructed from recurrent costs and selected capital costs, was used to estimate average cost per user and per contact of an m-health intervention. This model was mapped to statistically significant changes in MNCH intermediate outcomes to determine the cost of improvements in MNCH indicators. Sensitivity analyses were conducted to estimate costs in alternate scenarios. The m-health intervention cost $29.33 per user and $4.33 per successful contact. The average cost for each user experiencing a change in an MNCH indicator ranged from $67 to $355. The sensitivity analyses showed that cost per user could be reduced by 48% if the service were to operate at full capacity. We believe that the intervention, operating at scale, has potential to be a cost-effective method for improving maternal and child health indicators.

Scale Matters: A Cost-Outcome Analysis of an m-Health Intervention in Malawi

PubMed Central

Bancroft, Emily; Rajagopal, Sharanya; O'Toole, Maggie; Levin, Ann

2016-01-01

Abstract Background: The primary objectives of this study are to determine cost per user and cost per contact with users of a mobile health (m-health) intervention. The secondary objectives are to map costs to changes in maternal, newborn, and child health (MNCH) and to estimate costs of alternate implementation and usage scenarios. Materials and Methods: A base cost model, constructed from recurrent costs and selected capital costs, was used to estimate average cost per user and per contact of an m-health intervention. This model was mapped to statistically significant changes in MNCH intermediate outcomes to determine the cost of improvements in MNCH indicators. Sensitivity analyses were conducted to estimate costs in alternate scenarios. Results: The m-health intervention cost $29.33 per user and $4.33 per successful contact. The average cost for each user experiencing a change in an MNCH indicator ranged from $67 to $355. The sensitivity analyses showed that cost per user could be reduced by 48% if the service were to operate at full capacity. Conclusions: We believe that the intervention, operating at scale, has potential to be a cost-effective method for improving maternal and child health indicators. PMID:26348994

Anaerobic co-digestion of dairy manure and potato waste

NASA Astrophysics Data System (ADS)

Yadanaparthi, Sai Krishna Reddy

Dairy and potato are two important agricultural commodities in Idaho. Both the dairy and potato processing industries produce a huge amount of waste which could cause environmental pollution. To minimize the impact of potential pollution associated with dairy manure (DM) and potato waste (PW), anaerobic co-digestion has been considered as one of the best treatment process. The purpose of this research is to evaluate the anaerobic co-digestion of dairy manure and potato waste in terms of process stability, biogas generation, construction and operating costs, and potential revenue. For this purpose, I conducted 1) a literature review, 2) a lab study on anaerobic co-digestion of dairy manure and potato waste at three different temperature ranges (ambient (20-25°C), mesophilic (35-37°C) and thermophilic (55-57°C) with five mixing ratios (DM:PW-100:0, 90:10, 80:20, 60:40, 40:60), and 3) a financial analysis for anaerobic digesters based on assumed different capital costs and the results from the lab co-digestion study. The literature review indicates that several types of organic waste were co-digested with DM. Dairy manure is a suitable base matter for the co-digestion process in terms of digestion process stability and methane (CH4) production (Chapter 2). The lab tests showed that co-digestion of DM with PW was better than digestion of DM alone in terms of biogas and CH4 productions (Chapter 3). The financial analysis reveals DM and PW can be used as substrate for full size anaerobic digesters to generate positive cash flow within a ten year time period. Based on this research, the following conclusions and recommendations were made: ▸ The ratio of DM:PW-80:20 is recommended at thermophilic temperatures and the ratio of DM:PW-90:10 was recommended at mesophilic temperatures for optimum biogas and CH4 productions. ▸ In cases of anaerobic digesters operated with electricity generation equipment (generators), low cost plug flow digesters (capital cost of 600/cow) operating at thermophilic temperatures are recommended. • The ratio of DM:PW-90:10 or 80:20 is recommended while operating low cost plug flow digesters at thermophilic temperatures. ▸ In cases of anaerobic digesters operated without electricity generation equipment (generators), completely mixed or high or low cost plug flow digesters can be used. • The ratio of DM:PW-80:20 is recommended for completely mixed digesters operated at thermophilic temperatures; • The ratio of DM:PW-90:10 or 80:20 is recommended for high cost plug flow digesters (capital cost of 1,000/cow) operated at thermophilic temperatures; • All of the four co-digested mixing ratios (i.e. DM:PW-90:10 or 80:20 or 60:40 or 40:60) are good for low cost plug flow digesters (capital cost of $600/cow) operated at thermophilic temperatures. The ratio of DM:PW-90:10 is recommended for positive cash flow within the ten year period if the low cost plug flow digesters are operated at mesophilic temperatures.

An Analysis of the Operation of the University of Mississippi School of Dentistry.

ERIC Educational Resources Information Center

Barber, James A.; And Others

The effectiveness of the financial management practices and the efficiency of the operations of the University of Mississippi School of Dentistry were evaluated, and recommendations to improve operations were offered by the legislative review committee. While the primary emphasis was effective cost management, attention was also directed to: the…

Costs, charges, and revenues for hospital diagnostic imaging procedures: differences by modality and hospital characteristics.

PubMed

Sistrom, Christopher Lee; McKay, Niccie L

2005-06-01

This study examined financial data reported by Florida hospitals concerning costs, charges, and revenues related to imaging services. Financial reports to the Florida Hospital Uniform Reporting System by all licensed acute care facilities for fiscal year 2002 were used to calculate four financial indices on a per procedure basis. These included charge, net revenue, operating expense (variable cost), and contribution margin. Analysis, stratified by cost center (imaging modality), tested the effects of bed size, ownership, teaching status, and urban or rural status on the four indices. The mean operating expense and charge per procedure were as follows: computed tomography (CT): $51 and $1565; x-ray and ultrasound: $55 and $410; nuclear medicine (NM): $135 and $1138; and magnetic resonance imaging (MRI): $165 and $2048. With all four modalities, for-profit hospitals had higher charges than not-for-profit and public facilities. Excepting NM, however, the difference by ownership disappeared when considering net revenue. Operating expense did not differ by ownership type or bed size. Operating expense (variable cost) per procedure is considerably lower for CT than for MRI. Consequently, when diagnostically equivalent, CT is preferable to MRI in terms of costs for hospitals. If the cost structure of nonhospital imaging is at all similar to hospitals, the profit potential for performing CT and MRI seems to be substantial, which has relevance to the issue of imaging self-referral.

Single visit surgery for pediatric ambulatory surgical procedures: a satisfaction and cost analysis.

PubMed

Olson, Jacob K; Deming, Lisa A; King, Denis R; Rager, Terrence M; Gartner, Sarah; Huibregtse, Natalie; Moss, R Lawrence; Besner, Gail E

2017-10-10

Single visit surgery (SVS) consists of same-day pre-operative assessment and operation with telephone post-operative follow-up. This reduces family time commitment to 1 hospital trip rather than 2-3. We began SVS for ambulatory patients with clear surgical indications in 2013. We sought to determine family satisfaction, cost savings to families, and institutional financial feasibility of SVS. SVS patients were compared to age/case matched conventional surgery (CS) patients. Satisfaction was assessed by post-operative telephone survey. Family costs were calculated as the sum of lost revenue (based on median income) and transportation costs ($0.50/mile). Satisfaction was high in both groups (98% for SVS vs. 93% for CS; p=0.27). 40% of CS families indicated that they would have preferred SVS, whereas no SVS families indicated preference for the CS option (p<0.001). Distance from the hospital did not correlate with satisfaction. Estimated cost savings for an SVS family was $188. Reimbursement, hospital and physician charges, and day-of-surgery cancellation rates were similar. SVS provides substantial cost savings to families while maintaining patient satisfaction and equivalent institutional reimbursement. SVS is an effective approach to low-risk ambulatory surgical procedures that is less disruptive to families, facilitates access to pediatric surgical care, and reduces resource utilization. Cost Effectiveness Study. Level II. Copyright © 2017 Elsevier Inc. All rights reserved.

The Space Transportation System. [Space Shuttle-Spacelab-Space Tug system

NASA Technical Reports Server (NTRS)

Donlan, C. J.; Brazill, E. J.

1976-01-01

The Space Transportation System, consisting of the Space Shuttle, Spacelab, and the Space Tug, is discussed from the viewpoint of reductions in the cost of space operations. Each of the three vehicles is described along with its mission capabilities, and the time table for system development activities is outlined. Basic attributes of the Space Transportation System are reviewed, all operational modes are considered, and the total cost picture of the system is examined from the standpoint of a mission economic analysis. It is concluded that as the features of the Space Transportation System, especially the Shuttle and the Tug, are put to more efficient use during the maturing-operation phase, the total cost of conducting space missions should be about half of what it would be if any other system were employed.

Cost/benefit tradeoffs for reducing the energy consumption of the commercial air transportation system

NASA Technical Reports Server (NTRS)

Kraus, E. F.; Vanabkoude, J. C.

1976-01-01

The fuel saving potential and cost effectiveness of numerous operational and technical options proposed for reducing the fuel consumption of the U.S. commercial airline fleet was examined and compared. The impact of the most promising fuel conserving options on fuel consumption, passenger demand, operating costs and airline profits when implemented in the U.S. domestic and international airline fleets was determined. A forecast estimate was made of the potential fuel savings achievable in the U.S. scheduled air transportation system. Specifically, the means for reducing the jet fuel consumption of the U.S. scheduled airlines in domestic and international passenger operations were investigated. A design analysis was made of two turboprop aircraft as possible fuel conserving derivatives of the DC-9-30.

Investigation of advanced navigation and guidance system concepts for all-weather rotorcraft operations

NASA Technical Reports Server (NTRS)

Upton, H. W.; Boen, G. E.; Moore, J.

1982-01-01

Results are presented of a survey conducted of active helicopter operators to determine the extent to which they wish to operate in IMC conditions, the visibility limits under which they would operate, the revenue benefits to be gained, and the percent of aircraft cost they would pay for such increased capability. Candidate systems were examined for capability to meet the requirements of a mission model constructed to represent the modes of flight normally encountered in low visibility conditions. Recommendations are made for development of high resolution radar, simulation of the control display system for steep approaches, and for development of an obstacle sensing system for detecting wires. A cost feasibility analysis is included.

Cost analysis of life sciences experiments and subsystems. [to be carried in the Spacelab

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1975-01-01

Cost estimates for experiments and subsystems flown in the Spacelab were established. Ten experiments were cost analyzed. Estimated cost varied from $650,000 for the hardware development of the SPE water electrolysis experiment to $78,500,000 for the development and operation of a representative life sciences laboratory program. The cost of subsystems for thermal, atmospheric and trace contaminants control of the Spacelab internal atmosphere was also estimated. Subsystem cost estimates were based on the utilization of existing components developed in previous space programs whenever necessary.

Economic Optimization Analysis of Chengdu Electric Community Bus Operation

NASA Astrophysics Data System (ADS)

Yidong, Wang; Yun, Cai; Zhengping, Tan; Xiong, Wan

2018-03-01

In recent years, the government has strongly supported and promoted electric vehicles and has given priority to demonstration and popularization in the field of public transport. The economy of public transport operations has drawn increasing attention. In this paper, Chengdu wireless charging pure electric community bus is used as the research object, the battery, air conditioning, driver’s driving behavior and other economic influence factors were analyzed, and optimizing the operation plan through case data analysis, through the reasonable battery matching and mode of operation to help businesses effectively save operating costs and enhance economic efficiency.

Incorporating robotic-assisted surgery for endometrial cancer staging: Analysis of morbidity and costs.

PubMed

Bogani, Giorgio; Multinu, Francesco; Dowdy, Sean C; Cliby, William A; Wilson, Timothy O; Gostout, Bobbie S; Weaver, Amy L; Borah, Bijan J; Killian, Jill M; Bijlani, Akash; Angioni, Stefano; Mariani, Andrea

2016-05-01

To evaluate how the introduction of robotic-assisted surgery affects treatment-related morbidity and cost of endometrial cancer (EC) staging. We retrospectively reviewed the records of consecutive patients with stage I-III EC undergoing surgical staging between 2007 and 2012 at our institution. Costs (from surgery to 30days after surgery) were set based on the Medicare cost-to-charge ratio for each year and inflated to 2014 values. Inverse probability weighting (IPW) was used to decrease the allocation bias when comparing outcomes between surgical groups. We focused our analysis on the 251 EC patients who had robotic-assisted surgery and the 384 who had open staging. During the study period, the use of robotic-assisted surgery increased and open staging decreased (P<0.001). Correcting group imbalances by using IPW methodology, we observed that patients undergoing robotic-assisted staging had a significantly lower postoperative complication rate, lower blood transfusion rate, longer median operating time, shorter median length of stay, and lower readmission rate than patients undergoing open staging (all P<0.001). Overall 30-day costs were similar between the 2 groups, with robotic-assisted surgery having significantly higher median operating room costs ($2820 difference; P<0.001) but lower median room and board costs ($2929 difference; P<0.001) than open surgery. Increasing experience with robotic-assisted staging was significantly associated with a decrease in median operating time (P=0.002) and length of stay (P=0.003). The implementation of robotic-assisted surgery for EC staging improves patient outcomes. It provides women the benefits of minimally invasive surgery without increasing costs and potentially improves patient turnover. Copyright © 2016 Elsevier Inc. All rights reserved.

Space Operations Center system analysis study extension. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1982-01-01

The analysis fo Space Operations Center (SOC) systems is summarized. Design considerations, configurations of the manned orbital space station, planned operational and research missions, and subsystem tradeoffs are considered. Integration into the space transportation system is discussed. A modular design concept permitting growth of the SOC as its functions are expanded is described. Additional considerations are special requirements for habitat modules, design modifications needed to operate in geosynchronous orbits, and use of the external tank for cryogenic propellant storage or as a pressurized hangar. A cost summary is presented.

Simulation of tunneling construction methods of the Cisumdawu toll road

NASA Astrophysics Data System (ADS)

Abduh, Muhamad; Sukardi, Sapto Nugroho; Ola, Muhammad Rusdian La; Ariesty, Anita; Wirahadikusumah, Reini D.

2017-11-01

Simulation can be used as a tool for planning and analysis of a construction method. Using simulation technique, a contractor could design optimally resources associated with a construction method and compare to other methods based on several criteria, such as productivity, waste, and cost. This paper discusses the use of simulation using Norwegian Method of Tunneling (NMT) for a 472-meter tunneling work in the Cisumdawu Toll Road project. Primary and secondary data were collected to provide useful information for simulation as well as problems that may be faced by the contractor. The method was modelled using the CYCLONE and then simulated using the WebCYCLONE. The simulation could show the duration of the project from the duration model of each work tasks which based on literature review, machine productivity, and several assumptions. The results of simulation could also show the total cost of the project that was modeled based on journal construction & building unit cost and online websites of local and international suppliers. The analysis of the advantages and disadvantages of the method was conducted based on its, wastes, and cost. The simulation concluded the total cost of this operation is about Rp. 900,437,004,599 and the total duration of the tunneling operation is 653 days. The results of the simulation will be used for a recommendation to the contractor before the implementation of the already selected tunneling operation.

Space tug economic analysis study. Volume 2: Tug concepts analysis. Part 2: Economic analysis

NASA Technical Reports Server (NTRS)

1972-01-01

An economic analysis of space tug operations is presented. The subjects discussed are: (1) cost uncertainties, (2) scenario analysis, (3) economic sensitivities, (4) mixed integer programming formulation of the space tug problem, and (5) critical parameters in the evaluation of a public expenditure.

Business intelligence modeling in launch operations

NASA Astrophysics Data System (ADS)

Bardina, Jorge E.; Thirumalainambi, Rajkumar; Davis, Rodney D.

2005-05-01

The future of business intelligence in space exploration will focus on the intelligent system-of-systems real-time enterprise. In present business intelligence, a number of technologies that are most relevant to space exploration are experiencing the greatest change. Emerging patterns of set of processes rather than organizational units leading to end-to-end automation is becoming a major objective of enterprise information technology. The cost element is a leading factor of future exploration systems. This technology project is to advance an integrated Planning and Management Simulation Model for evaluation of risks, costs, and reliability of launch systems from Earth to Orbit for Space Exploration. The approach builds on research done in the NASA ARC/KSC developed Virtual Test Bed (VTB) to integrate architectural, operations process, and mission simulations for the purpose of evaluating enterprise level strategies to reduce cost, improve systems operability, and reduce mission risks. The objectives are to understand the interdependency of architecture and process on recurring launch cost of operations, provide management a tool for assessing systems safety and dependability versus cost, and leverage lessons learned and empirical models from Shuttle and International Space Station to validate models applied to Exploration. The systems-of-systems concept is built to balance the conflicting objectives of safety, reliability, and process strategy in order to achieve long term sustainability. A planning and analysis test bed is needed for evaluation of enterprise level options and strategies for transit and launch systems as well as surface and orbital systems. This environment can also support agency simulation based acquisition process objectives. The technology development approach is based on the collaborative effort set forth in the VTB's integrating operations, process models, systems and environment models, and cost models as a comprehensive disciplined enterprise analysis environment. Significant emphasis is being placed on adapting root cause from existing Shuttle operations to exploration. Technical challenges include cost model validation, integration of parametric models with discrete event process and systems simulations, and large-scale simulation integration. The enterprise architecture is required for coherent integration of systems models. It will also require a plan for evolution over the life of the program. The proposed technology will produce long-term benefits in support of the NASA objectives for simulation based acquisition, will improve the ability to assess architectural options verses safety/risk for future exploration systems, and will facilitate incorporation of operability as a systems design consideration, reducing overall life cycle cost for future systems.

Business Intelligence Modeling in Launch Operations

NASA Technical Reports Server (NTRS)

Bardina, Jorge E.; Thirumalainambi, Rajkumar; Davis, Rodney D.

2005-01-01

This technology project is to advance an integrated Planning and Management Simulation Model for evaluation of risks, costs, and reliability of launch systems from Earth to Orbit for Space Exploration. The approach builds on research done in the NASA ARC/KSC developed Virtual Test Bed (VTB) to integrate architectural, operations process, and mission simulations for the purpose of evaluating enterprise level strategies to reduce cost, improve systems operability, and reduce mission risks. The objectives are to understand the interdependency of architecture and process on recurring launch cost of operations, provide management a tool for assessing systems safety and dependability versus cost, and leverage lessons learned and empirical models from Shuttle and International Space Station to validate models applied to Exploration. The systems-of-systems concept is built to balance the conflicting objectives of safety, reliability, and process strategy in order to achieve long term sustainability. A planning and analysis test bed is needed for evaluation of enterprise level options and strategies for transit and launch systems as well as surface and orbital systems. This environment can also support agency simulation .based acquisition process objectives. The technology development approach is based on the collaborative effort set forth in the VTB's integrating operations. process models, systems and environment models, and cost models as a comprehensive disciplined enterprise analysis environment. Significant emphasis is being placed on adapting root cause from existing Shuttle operations to exploration. Technical challenges include cost model validation, integration of parametric models with discrete event process and systems simulations. and large-scale simulation integration. The enterprise architecture is required for coherent integration of systems models. It will also require a plan for evolution over the life of the program. The proposed technology will produce long-term benefits in support of the NASA objectives for simulation based acquisition, will improve the ability to assess architectural options verses safety/risk for future exploration systems, and will facilitate incorporation of operability as a systems design consideration, reducing overall life cycle cost for future systems. The future of business intelligence of space exploration will focus on the intelligent system-of-systems real-time enterprise. In present business intelligence, a number of technologies that are most relevant to space exploration are experiencing the greatest change. Emerging patterns of set of processes rather than organizational units leading to end-to-end automation is becoming a major objective of enterprise information technology. The cost element is a leading factor of future exploration systems.

Analysis of the economics of photovoltaic-diesel-battery energy systems for remote applications

NASA Technical Reports Server (NTRS)

Brainard, W. A.

1983-01-01

Computer simulations were conducted to analyze the performance and operating cost of a photovoltaic energy source combined with a diesel generator system and battery storage. The simulations were based on the load demand profiles used for the design of an all photovoltaic energy system installed in the remote Papago Indian Village of Schuchuli, Arizona. Twenty year simulations were run using solar insolation data from Phoenix SOLMET tapes. Total energy produced, energy consumed, operation and maintenance costs were calculated. The life cycle and levelized energy costs were determined for a variety of system configurations (i.e., varying amounts of photovoltaic array and battery storage).

Ambulatory electronic medical record payback analysis 7 years after implementation in a tertiary care county medical system.

PubMed

Kaelber, David C; Miller, Vince; Fisher, Nancy; Schlesinger, Jim; Norris, Greg

2007-10-11

Electronic medical records (EMRs) are gaining increasing prominence in healthcare, however still have low market penetration. EMR implementation cost is a primary perceived barrier. Here we present a payback analysis on an outpatient EMR implementation, showing capital expense recovery (net of operating costs) at 6 years and now generating $6 million yearly in direct savings for our healthcare system.

The 747 primary flight control systems reliability and maintenance study

NASA Technical Reports Server (NTRS)

1979-01-01

The major operational characteristics of the 747 Primary Flight Control Systems (PFCS) are described. Results of reliability analysis for separate control functions are presented. The analysis makes use of a NASA computer program which calculates reliability of redundant systems. Costs for maintaining the 747 PFCS in airline service are assessed. The reliabilities and cost will provide a baseline for use in trade studies of future flight control system design.

Standardization and program effect analysis (Study 2.4). Volume 3: Design-to-cost analysis

NASA Technical Reports Server (NTRS)

Shiokari, T.

1975-01-01

The program procedures that were incorporated into an on-going "design-to-cost" spacecraft program are examined. Program procedures are the activities that support the development and operations of the flight unit: contract management, documents, integration meetings, engineering, and testing. This report is limited to the program procedures that were implemented, with emphasis on areas that may depart from normal satellite development practices.

Operative Cost Comparison: Plating Versus Intramedullary Fixation for Clavicle Fractures.

PubMed

Hanselman, Andrew E; Murphy, Timothy R; Bal, George K; McDonough, E Barry

2016-09-01

Although clavicle fractures often heal well with nonoperative management, current literature has shown improved outcomes with operative intervention for specific fracture patterns in specific patient types. The 2 most common methods of midshaft clavicle fracture fixation are intramedullary and plate devices. Through retrospective analysis, this study performed a direct cost comparison of these 2 types of fixation at a single institution over a 5-year period. Outcome measures included operative costs for initial surgery and any hardware removal surgeries. This study reviewed 154 patients (157 fractures), and of these, 99 had intramedullary fixation and 58 had plate fixation. A total of 80% (79 of 99) of intramedullary devices and 3% (2 of 58) of plates were removed. Average cost for initial intramedullary placement was $2955 (US dollars) less than that for initial plate placement (P<.001); average cost for removal was $1874 less than that for plate removal surgery (P=.2). Average total cost for all intramedullary surgeries was $1392 less than the average cost for all plating surgeries (P<.001). Average cost for all intramedullary surgeries requiring plate placement and removal was $653 less than the average cost for all plating surgeries that involved only placement (P=.04). Intramedullary fixation of clavicle fractures resulted in a statistically significant cost reduction compared with plate fixation, despite the incidence of more frequent removal surgeries. [Orthopedics.2016; 39(5):e877-e882.]. Copyright 2016, SLACK Incorporated.

Cost of installing and operating an electronic clinical decision support system for maternal health care: case of Tanzania rural primary health centres.

PubMed

Saronga, Happiness Pius; Dalaba, Maxwell Ayindenaba; Dong, Hengjin; Leshabari, Melkizedeck; Sauerborn, Rainer; Sukums, Felix; Blank, Antje; Kaltschmidt, Jens; Loukanova, Svetla

2015-04-02

Poor quality of care is among the causes of high maternal and newborn disease burden in Tanzania. Potential reason for poor quality of care is the existence of a "know-do gap" where by health workers do not perform to the best of their knowledge. An electronic clinical decision support system (CDSS) for maternal health care was piloted in six rural primary health centers of Tanzania to improve performance of health workers by facilitating adherence to World Health Organization (WHO) guidelines and ultimately improve quality of maternal health care. This study aimed at assessing the cost of installing and operating the system in the health centers. This retrospective study was conducted in Lindi, Tanzania. Costs incurred by the project were analyzed using Ingredients approach. These costs broadly included vehicle, computers, furniture, facility, CDSS software, transport, personnel, training, supplies and communication. These were grouped into installation and operation cost; recurrent and capital cost; and fixed and variable cost. We assessed the CDSS in terms of its financial and economic cost implications. We also conducted a sensitivity analysis on the estimations. Total financial cost of CDSS intervention amounted to 185,927.78 USD. 77% of these costs were incurred in the installation phase and included all the activities in preparation for the actual operation of the system for client care. Generally, training made the largest share of costs (33% of total cost and more than half of the recurrent cost) followed by CDSS software- 32% of total cost. There was a difference of 31.4% between the economic and financial costs. 92.5% of economic costs were fixed costs consisting of inputs whose costs do not vary with the volume of activity within a given range. Economic cost per CDSS contact was 52.7 USD but sensitive to discount rate, asset useful life and input cost variations. Our study presents financial and economic cost estimates of installing and operating an electronic CDSS for maternal health care in six rural health centres. From these findings one can understand exactly what goes into a similar investment and thus determine sorts of input modification needed to fit their context.

Cost-effectiveness of the US Geological Survey stream-gaging program in Arkansas

USGS Publications Warehouse

Darling, M.E.; Lamb, T.E.

1984-01-01

This report documents the results of the cost-effectiveness of the stream-gaging program in Arkansas. Data uses and funding sources were identified for the daily-discharge stations. All daily-discharge stations were found to be in one or more data use categories, and none were candidates for alternate methods which would result in discontinuation or conversion to a partial record station. The cost for operation of daily-discharge stations and routing costs to partial record stations, crest gages, pollution control stations as well as seven recording ground-water stations was evaluated in the Kalman-Filtering Cost-Effective Resource allocation (K-CERA) analysis. This operation under current practices requires a budget of $292,150. The average standard error of estimate of streamflow record for the Arkansas District was analyzed at 33 percent.

The ATA-67 Formula for Direct Operating Cost

NASA Technical Reports Server (NTRS)

Faulkner, H. B.

1972-01-01

The ATA formulas for direct operating cost were developed for the purpose of comparing different aircraft, existing or not, on the same route or the same aircraft on different routes. Such characteristics of the airline as crew pay, maintenance procedures, and depreciation schedules are kept constant. In air transportation systems analysis the 1967 ATA formula is usually used with appropriate exceptions or modifications, such as: different maintenance labor rate, total maintenance multiplied by a factor, maintenance burden deleted, different depreciation schedule, or different spares percentages.

Working Group 3: Operations Analysis for Systems of System within a Networked C2 Context: Introduction, Purpose, and Approach

DTIC Science & Technology

2012-01-01

1200 Session 3 – C2 Framework, OR Methods MOOs, MOEs, MOPs Development Case Study – 1300-1630 Session 4 – Findings...Objective 1: Understand the impact of the application of traditional operational research techniques to networked C2 systems. • Objective 2: Develop ...for the network. 3. Cost measures including cost and time to implement the solution (for example, a basic rule-of-thumb I use for development

Financing Strategies For A Nuclear Fuel Cycle Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Shropshire; Sharon Chandler

2006-07-01

To help meet the nation’s energy needs, recycling of partially used nuclear fuel is required to close the nuclear fuel cycle, but implementing this step will require considerable investment. This report evaluates financing scenarios for integrating recycling facilities into the nuclear fuel cycle. A range of options from fully government owned to fully private owned were evaluated using DPL (Decision Programming Language 6.0), which can systematically optimize outcomes based on user-defined criteria (e.g., lowest lifecycle cost, lowest unit cost). This evaluation concludes that the lowest unit costs and lifetime costs are found for a fully government-owned financing strategy, due tomore » government forgiveness of debt as sunk costs. However, this does not mean that the facilities should necessarily be constructed and operated by the government. The costs for hybrid combinations of public and private (commercial) financed options can compete under some circumstances with the costs of the government option. This analysis shows that commercial operations have potential to be economical, but there is presently no incentive for private industry involvement. The Nuclear Waste Policy Act (NWPA) currently establishes government ownership of partially used commercial nuclear fuel. In addition, the recently announced Global Nuclear Energy Partnership (GNEP) suggests fuels from several countries will be recycled in the United States as part of an international governmental agreement; this also assumes government ownership. Overwhelmingly, uncertainty in annual facility capacity led to the greatest variations in unit costs necessary for recovery of operating and capital expenditures; the ability to determine annual capacity will be a driving factor in setting unit costs. For private ventures, the costs of capital, especially equity interest rates, dominate the balance sheet; and the annual operating costs, forgiveness of debt, and overnight costs dominate the costs computed for the government case. The uncertainty in operations, leading to lower than optimal processing rates (or annual plant throughput), is the most detrimental issue to achieving low unit costs. Conversely, lowering debt interest rates and the required return on investments can reduce costs for private industry.« less

Retroperitoneal versus transperitoneal robotic-assisted laparoscopic partial nephrectomy: a matched-pair, bicenter analysis with cost comparison using time-driven activity-based costing.

PubMed

Laviana, Aaron A; Tan, Hung-Jui; Hu, Jim C; Weizer, Alon Z; Chang, Sam S; Barocas, Daniel A

2018-03-01

To perform a bicenter, retrospective study of perioperative outcomes of retroperitoneal versus transperitoneal robotic-assisted laparoscopic partial nephrectomy (RALPN) and assess costs using time-driven activity-based costing (TDABC). We identified 355 consecutive patients who underwent RALPN at University of California Los Angeles and the University of Michigan during 2009-2016. We matched according to RENAL nephrometry score, date, and institution for 78 retroperitoneal versus 78 transperitoneal RALPN. Unadjusted analyses were performed using McNemar's Chi-squared or paired t test, and adjusted analyses were performed using multivariable repeated measures regression analysis. From multivariable models, predicted probabilities were derived according to approach. Cost analysis was performed using TDABC. Patients treated with retroperitoneal versus transperitoneal RALPN were similar in age (P = 0.490), sex (P = 0.715), BMI (P = 0.273), and comorbidity (P = 0.393). Most tumors were posterior or lateral in both the retroperitoneal (92.3%) and transperitoneal (85.9%) groups. Retroperitoneal RALPN was associated with shorter operative times (167.0 versus 191.1 min, P = 0.001) and length of stay (LOS) (1.8 versus 2.7 days, P < 0.001). There were no differences in renal function preservation or cancer control. In adjusted analyses, retroperitoneal RALPN was 17.6-min shorter (P < 0.001) and had a 76% lower probability of LOS at least 2 days (P < 0.001). Utilizing TDABC, transperitoneal RALPN added $2337 in cost when factoring in disposable equipment, operative time, LOS, and personnel. In two high-volume, tertiary centers, retroperitoneal RALPN is associated with reduced operative times and shortened LOS in posterior and lateral tumors, whereas sharing similar clinicopathologic outcomes, which may translate into lower healthcare costs. Further investigation into anterior tumors is needed.

Space station needs, attributes and architectural options. Volume 4, attachment 1: Task 2 and 3 mission implementation and cost

NASA Technical Reports Server (NTRS)

1983-01-01

Mission scenario analysis and architectural concepts, alternative systems concepts, mission operations and architectural development, architectural analysis trades, evolution, configuration, and technology development are assessed.

National law enforcement telecommunications network

NASA Technical Reports Server (NTRS)

Reilly, N. B.; Garrison, G. W.; Sohn, R. L.; Gallop, D. L.; Goldstein, B. L.

1975-01-01

Alternative approaches are analyzed to a National Law Enforcement Telecommunications Network (NALECOM) designed to service all state-to-state and state-to-national criminal justice communications traffic needs in the United States. Network topology options were analyzed, and equipment and personnel requirements for each option were defined in accordance with NALECOM functional specifications and design guidelines. Evaluation criteria were developed and applied to each of the options leading to specific conclusions. Detailed treatments of methods for determining traffic requirements, communication line costs, switcher configurations and costs, microwave costs, satellite system configurations and costs, facilities, operations and engineering costs, network delay analysis and network availability analysis are presented. It is concluded that a single regional switcher configuration is the optimum choice based on cost and technical factors. A two-region configuration is competitive. Multiple-region configurations are less competitive due to increasing costs without attending benefits.

Need for Cost Optimization of Space Life Support Systems

NASA Technical Reports Server (NTRS)

Jones, Harry W.; Anderson, Grant

2017-01-01

As the nation plans manned missions that go far beyond Earth orbit to Mars, there is an urgent need for a robust, disciplined systems engineering methodology that can identify an optimized Environmental Control and Life Support (ECLSS) architecture for long duration deep space missions. But unlike the previously used Equivalent System Mass (ESM), the method must be inclusive of all driving parameters and emphasize the economic analysis of life support system design. The key parameter for this analysis is Life Cycle Cost (LCC). LCC takes into account the cost for development and qualification of the system, launch costs, operational costs, maintenance costs and all other relevant and associated costs. Additionally, an effective methodology must consider system technical performance, safety, reliability, maintainability, crew time, and other factors that could affect the overall merit of the life support system.

REopt: A Platform for Energy System Integration and Optimization: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpkins, T.; Cutler, D.; Anderson, K.

2014-08-01

REopt is NREL's energy planning platform offering concurrent, multi-technology integration and optimization capabilities to help clients meet their cost savings and energy performance goals. The REopt platform provides techno-economic decision-support analysis throughout the energy planning process, from agency-level screening and macro planning to project development to energy asset operation. REopt employs an integrated approach to optimizing a site?s energy costs by considering electricity and thermal consumption, resource availability, complex tariff structures including time-of-use, demand and sell-back rates, incentives, net-metering, and interconnection limits. Formulated as a mixed integer linear program, REopt recommends an optimally-sized mix of conventional and renewable energy, andmore » energy storage technologies; estimates the net present value associated with implementing those technologies; and provides the cost-optimal dispatch strategy for operating them at maximum economic efficiency. The REopt platform can be customized to address a variety of energy optimization scenarios including policy, microgrid, and operational energy applications. This paper presents the REopt techno-economic model along with two examples of recently completed analysis projects.« less

Los Angeles congestion reduction demonstration (Metro ExpressLanes). National evaluation : cost benefit analysis test plan.

DOT National Transportation Integrated Search

2002-04-01

The Theory of Operations document is one of a series of deliverables documenting the National Intelligent Transportation System (ITS) Architecture developed under contract to the U.S. Department of Transportation (DOT). The Theory of Operations Docum...

A framework for evaluating forest restoration alternatives and their outcomes, over time, to inform monitoring: Bioregional inventory originated simulation under management

Treesearch

Jeremy S. Fried; Theresa B. Jain; Sara Loreno; Robert F. Keefe; Conor K. Bell

2017-01-01

The BioSum modeling framework summarizes current and prospective future forest conditions under alternative management regimes along with their costs, revenues and product yields. BioSum translates Forest Inventory and Analysis (FIA) data for input to the Forest Vegetation Simulator (FVS), summarizes FVS outputs for input to the treatment operations cost model (OpCost...

Supporting Air and Space Expeditionary Forces: Analysis of CONUS Centralized Intermediate Repair Facilities

DTIC Science & Technology

2008-01-01

designing cost -effective CIRF networks or readily comparing alterna- tive potential network designs. The RAND Corporation was asked to develop such an...optimization model that allows users to select the best mix of land- and sea-based FSLs for a given set of operational scenarios, thereby reducing costs while...27 Overview of Post-BRAC Bed-Downs and CIRF Assignments . . . . . . . . . . . . . 27 JEIM Cost

Energy Storage Applications in Power Systems with Renewable Energy Generation

NASA Astrophysics Data System (ADS)

Ghofrani, Mahmoud

In this dissertation, we propose new operational and planning methodologies for power systems with renewable energy sources. A probabilistic optimal power flow (POPF) is developed to model wind power variations and evaluate the power system operation with intermittent renewable energy generation. The methodology is used to calculate the operating and ramping reserves that are required to compensate for power system uncertainties. Distributed wind generation is introduced as an operational scheme to take advantage of the spatial diversity of renewable energy resources and reduce wind power fluctuations using low or uncorrelated wind farms. The POPF is demonstrated using the IEEE 24-bus system where the proposed operational scheme reduces the operating and ramping reserve requirements and operation and congestion cost of the system as compared to operational practices available in the literature. A stochastic operational-planning framework is also proposed to adequately size, optimally place and schedule storage units within power systems with high wind penetrations. The method is used for different applications of energy storage systems for renewable energy integration. These applications include market-based opportunities such as renewable energy time-shift, renewable capacity firming, and transmission and distribution upgrade deferral in the form of revenue or reduced cost and storage-related societal benefits such as integration of more renewables, reduced emissions and improved utilization of grid assets. A power-pool model which incorporates the one-sided auction market into POPF is developed. The model considers storage units as market participants submitting hourly price bids in the form of marginal costs. This provides an accurate market-clearing process as compared to the 'price-taker' analysis available in the literature where the effects of large-scale storage units on the market-clearing prices are neglected. Different case studies are provided to demonstrate our operational-planning framework and economic justification for different storage applications. A new reliability model is proposed for security and adequacy assessment of power networks containing renewable resources and energy storage systems. The proposed model is used in combination with the operational-planning framework to enhance the reliability and operability of wind integration. The proposed framework optimally utilizes the storage capacity for reliability applications of wind integration. This is essential for justification of storage deployment within regulated utilities where the absence of market opportunities limits the economic advantage of storage technologies over gas-fired generators. A control strategy is also proposed to achieve the maximum reliability using energy storage systems. A cost-benefit analysis compares storage technologies and conventional alternatives to reliably and efficiently integrate different wind penetrations and determines the most economical design. Our simulation results demonstrate the necessity of optimal storage placement for different wind applications. This dissertation also proposes a new stochastic framework to optimally charge and discharge electric vehicles (EVs) to mitigate the effects of wind power uncertainties. Vehicle-to-grid (V2G) service for hedging against wind power imbalances is introduced as a novel application for EVs. This application enhances the predictability of wind power and reduces the power imbalances between the scheduled output and actual power. An Auto Regressive Moving Average (ARMA) wind speed model is developed to forecast the wind power output. Driving patterns of EVs are stochastically modeled and the EVs are clustered in the fleets of similar daily driving patterns. Monte Carlo Simulation (MCS) simulates the system behavior by generating samples of system states using the wind ARMA model and EVs driving patterns. A Genetic Algorithm (GA) is used in combination with MCS to optimally coordinate the EV fleets for their V2G services and minimize the penalty cost associated with wind power imbalances. The economic characteristics of automotive battery technologies and costs of V2G service are incorporated into a cost-benefit analysis which evaluates the economic justification of the proposed V2G application. Simulation results demonstrate that the developed algorithm enhances wind power utilization and reduces the penalty cost for wind power under-/over-production. This offers potential revenues for the wind producer. Our cost-benefit analysis also demonstrates that the proposed algorithm will provide the EV owners with economic incentives to participate in V2G services. The proposed smart scheduling strategy develops a sustainable integrated electricity and transportation infrastructure.

Radioactive Waste Characterization Strategies; Comparisons Between AK/PK, Dose to Curie Modeling, Gamma Spectroscopy, and Laboratory Analysis Methods- 12194

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singledecker, Steven J.; Jones, Scotty W.; Dorries, Alison M.

2012-07-01

In the coming fiscal years of potentially declining budgets, Department of Energy facilities such as the Los Alamos National Laboratory (LANL) will be looking to reduce the cost of radioactive waste characterization, management, and disposal processes. At the core of this cost reduction process will be choosing the most cost effective, efficient, and accurate methods of radioactive waste characterization. Central to every radioactive waste management program is an effective and accurate waste characterization program. Choosing between methods can determine what is classified as low level radioactive waste (LLRW), transuranic waste (TRU), waste that can be disposed of under an Authorizedmore » Release Limit (ARL), industrial waste, and waste that can be disposed of in municipal landfills. The cost benefits of an accurate radioactive waste characterization program cannot be overstated. In addition, inaccurate radioactive waste characterization of radioactive waste can result in the incorrect classification of radioactive waste leading to higher disposal costs, Department of Transportation (DOT) violations, Notice of Violations (NOVs) from Federal and State regulatory agencies, waste rejection from disposal facilities, loss of operational capabilities, and loss of disposal options. Any one of these events could result in the program that mischaracterized the waste losing its ability to perform it primary operational mission. Generators that produce radioactive waste have four characterization strategies at their disposal: - Acceptable Knowledge/Process Knowledge (AK/PK); - Indirect characterization using a software application or other dose to curie methodologies; - Non-Destructive Analysis (NDA) tools such as gamma spectroscopy; - Direct sampling (e.g. grab samples or Surface Contaminated Object smears) and laboratory analytical; Each method has specific advantages and disadvantages. This paper will evaluate each method detailing those advantages and disadvantages including; - Cost benefit analysis (basic materials costs, overall program operations costs, man-hours per sample analyzed, etc.); - Radiation Exposure As Low As Reasonably Achievable (ALARA) program considerations; - Industrial Health and Safety risks; - Overall Analytical Confidence Level. The concepts in this paper apply to any organization with significant radioactive waste characterization and management activities working to within budget constraints and seeking to optimize their waste characterization strategies while reducing analytical costs. (authors)« less

Unit Cost Analysis of PET-CT at an Apex Public Sector Health Care Institute in India.

PubMed

Gajuryal, S H; Daga, A; Siddharth, V; Bal, C S; Satpathy, S

2017-01-01

PET/CT scan service is one of the capital intensive and revenue-generating centres of a tertiary care hospital. The cost associated with the provisioning of PET services is dependent upon the unit costs of the resources consumed. The study aims to determine the cost of providing PET/CT Scan services in a hospital. This descriptive and observational study was conducted in the Department of Nuclear Medicine at a tertiary apex teaching hospital in New Delhi, India in the year 2014-15. Traditional costing methodology was used for calculating the unit cost of PET/CT scan service. The cost was calculated under two heads that is capital and operating cost. Annualized cost of capital assets was calculated using methodology prescribed by WHO and operating costs was taken on an actual basis. Average number of PET/CT scan performed in a day is 30. The annual cost of providing PET/CT scan services was calculated to be 65,311,719 Indian Rupees (INR) (US$ 1,020,496), while the unit cost of PET scan was calculated to be 9625.92 INR (US$ 150). 3/4th cost was spent on machinery and equipment (75.3%) followed by healthcare personnel (11.37%), electricity (5%), consumables and supplies (4%) engineering maintenance (3.24%), building, furniture and HVAC capital cost (0.76%), and manifold cost (0.05%). Of the total cost, 76% was capital cost while the remaining was operating cost. Total cost for establishing PET/CT scan facility with cyclotron and chemistry module and PET/CT scan without cyclotron and chemistry module was calculated to be INR 610,873,517 (US$9944899) and 226,745,158 (US$3542893), respectively. (US$ 1=INR 64).

Efficient Merge and Insert Operations for Binary Heaps and Trees

NASA Technical Reports Server (NTRS)

Kuszmaul, Christopher Lee; Woo, Alex C. (Technical Monitor)

2000-01-01

Binary heaps and binary search trees merge efficiently. We introduce a new amortized analysis that allows us to prove the cost of merging either binary heaps or balanced binary trees is O(l), in the amortized sense. The standard set of other operations (create, insert, delete, extract minimum, in the case of binary heaps, and balanced binary trees, as well as a search operation for balanced binary trees) remain with a cost of O(log n). For binary heaps implemented as arrays, we show a new merge algorithm that has a single operation cost for merging two heaps, a and b, of O(absolute value of a + min(log absolute value of b log log absolute value of b. log absolute value of a log absolute value of b). This is an improvement over O(absolute value of a + log absolute value of a log absolute value of b). The cost of the new merge is so low that it can be used in a new structure which we call shadow heaps. to implement the insert operation to a tunable efficiency. Shadow heaps support the insert operation for simple priority queues in an amortized time of O(f(n)) and other operations in time O((log n log log n)/f (n)), where 1 less than or equal to f (n) less than or equal to log log n. More generally, the results here show that any data structure with operations that change its size by at most one, with the exception of a merge (aka meld) operation, can efficiently amortize the cost of the merge under conditions that are true for most implementations of binary heaps and search trees.

Umbilical hernias: the cost of waiting.

PubMed

Strosberg, David S; Pittman, Matthew; Mikami, Dean

2017-02-01

Umbilical hernias are well described in the literature, but its impact on health care is less understood. The purpose of this study was to investigate the effect of non-operative management of umbilical hernias on cost, work absenteeism, and resource utilization. The Truven Health Database, consisting of 279 employers and over 3000 hospitals, was reviewed for all umbilical hernia patients, aged 18-64 who were enrolled in health plans for 12 months prior to surgery and 12 months after surgery. Patients were excluded if they had a recurrence or had been offered a "no surgery" approach within 1 year of the index date. The remaining patients were separated into surgery (open or laparoscopic repair) or no surgery (NS). Post-cost analysis at 90 and 365 days and estimated days off from work were reviewed for each group. The non-surgery cohort had a higher proportion of females and comorbidity index. Adjusted analysis showed significantly higher 90 and 365 costs for the surgery group (p < 0.0001), though the cost difference did decrease over time. NS group had significantly higher estimated days of health-care utilization at both the 90 (1.99 vs. 3.58 p < 0.0001) and 365 (8.69 vs. 11.04 p < 0.0001) day post-index mark. A subgroup analysis demonstrated laparoscopic repair had higher costs compared to open primarily due to higher index procedure costs (p < 0.05). Though the financial costs were found to be higher in the surgery group, the majority of these were due to the surgery itself. Significantly higher days of health-care utilization and estimated days off work were experienced in the NS group. It is our belief that early operative intervention will lead to decreased costs and resource utilization.

Comparative health technology assessment of robotic-assisted, direct manual laparoscopic and open surgery: a prospective study.

PubMed

Turchetti, Giuseppe; Pierotti, Francesca; Palla, Ilaria; Manetti, Stefania; Freschi, Cinzia; Ferrari, Vincenzo; Cuschieri, Alfred

2017-02-01

Despite many publications reporting on the increased hospital cost of robotic-assisted surgery (RAS) compared to direct manual laparoscopic surgery (DMLS) and open surgery (OS), the reported health economic studies lack details on clinical outcome, precluding valid health technology assessment (HTA). The present prospective study reports total cost analysis on 699 patients undergoing general surgical, gynecological and thoracic operations between 2011 and 2014 in the Italian Public Health Service, during which period eight major teaching hospitals treated the patients. The study compared total healthcare costs of RAS, DMLS and OS based on prospectively collected data on patient outcome in addition to healthcare costs incurred by the three approaches. The cost of RAS operations was significantly higher than that of OS and DMLS for both gynecological and thoracic operations (p < 0.001). The study showed no significant difference in total costs between OS and DMLS. Total costs of general surgery RAS were significantly higher than those of OS (p < 0.001), but not against DMLS general surgery. Indirect costs were significantly lower in RAS compared to both DMLS general surgery and OS gynecological surgery due to the shorter length of hospital stay of RAS approach (p < 0.001). Additionally, in all specialties compared to OS, patients treated by RAS experienced a quicker recovery and significantly less pain during the hospitalization and after discharge. The present HTA while confirming higher total healthcare costs for RAS operations identified significant clinical benefits which may justify the increased expenditure incurred by this approach.

Parts Quality Management: Direct Part Marking via Data Matrix Symbols for Mission Assurance

NASA Technical Reports Server (NTRS)

Moss, Chantrice

2013-01-01

A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part-marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using 15 marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, orbital), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (data plates, label printing, direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including in-house vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

Integrating O/S models during conceptual design, part 1

NASA Technical Reports Server (NTRS)

Ebeling, Charles E.

1994-01-01

The University of Dayton is pleased to submit this report to the National Aeronautics and Space Administration (NASA), Langley Research Center, which integrates a set of models for determining operational capabilities and support requirements during the conceptual design of proposed space systems. This research provides for the integration of the reliability and maintainability (R&M) model, both new and existing simulation models, and existing operations and support (O&S) costing equations in arriving at a complete analysis methodology. Details concerning the R&M model and the O&S costing model may be found in previous reports accomplished under this grant (NASA Research Grant NAG1-1327). In the process of developing this comprehensive analysis approach, significant enhancements were made to the R&M model, updates to the O&S costing model were accomplished, and a new simulation model developed. This is the 1st part of a 3 part technical report.

Cost-minimization analysis in a blind randomized trial on small-incision versus laparoscopic cholecystectomy from a societal perspective: sick leave outweighs efforts in hospital savings

PubMed Central

Keus, Frederik; de Jonge, Trudy; Gooszen, Hein G; Buskens, Erik; van Laarhoven, Cornelis JHM

2009-01-01

Background After its introduction, laparoscopic cholecystectomy rapidly expanded around the world and was accepted the procedure of choice by consensus. However, analysis of evidence shows no difference regarding primary outcome measures between laparoscopic and small-incision cholecystectomy. In absence of clear clinical benefit it may be interesting to focus on the resource use associated with the available techniques, a secondary outcome measure. This study focuses on a difference in costs between laparoscopic and small-incision cholecystectomy from a societal perspective with emphasis on internal validity and generalisability Methods A blinded randomized single-centre trial was conducted in a general teaching hospital in The Netherlands. Patients with reasonable to good health diagnosed with symptomatic cholecystolithiasis scheduled for cholecystectomy were included. Patients were randomized between laparoscopic and small-incision cholecystectomy. Total costs were analyzed from a societal perspective. Results Operative costs were higher in the laparoscopic group using reusable laparoscopic instruments (difference 203 euro; 95% confidence interval 147 to 259 euro). There were no significant differences in the other direct cost categories (outpatient clinic and admittance related costs), indirect costs, and total costs. More than 60% of costs in employed patients were caused by sick leave. Conclusion Based on differences in costs, small-incision cholecystectomy seems to be the preferred operative technique over the laparoscopic technique both from a hospital and societal cost perspective. Sick leave associated with convalescence after cholecystectomy in employed patients results in considerable costs to society. Trial registration ISRCTN Register, number ISRCTN67485658. PMID:19732431

Approximation Model Building for Reliability & Maintainability Characteristics of Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Unal, Resit; Morris, W. Douglas; White, Nancy H.; Lepsch, Roger A.; Brown, Richard W.

2000-01-01

This paper describes the development of parametric models for estimating operational reliability and maintainability (R&M) characteristics for reusable vehicle concepts, based on vehicle size and technology support level. A R&M analysis tool (RMAT) and response surface methods are utilized to build parametric approximation models for rapidly estimating operational R&M characteristics such as mission completion reliability. These models that approximate RMAT, can then be utilized for fast analysis of operational requirements, for lifecycle cost estimating and for multidisciplinary sign optimization.

Visual Decision Support Tool for Supporting Asset Management Performance, Risk, and Cost Analysis (WERF Report INFR5R12)

EPA Science Inventory

Abstract:Managing urban water infrastructures faces the challenge of jointly dealing with assets of diverse types, useful life, cost, ages and condition. Service quality and sustainability require sound long-term planning, well aligned with tactical and operational planning and m...

The Costs of Experience Corps[R] in Public Schools

ERIC Educational Resources Information Center

Frick, Kevin D.; McGill, Sylvia; Tan, Erwin J.; Rebok, George W.; Carson, Michelle C.; Tanner, Elizabeth K.; Fried, Linda P.

2012-01-01

Objective: To describe the annual operational costs of a mature Experience Corps[R] program in elementary schools in the Baltimore City Public School System. Methods: Systematic records of expenditures kept by the community partner, Greater Homewood Community Corporation, to be reported to funders were made available for analysis. Expenditures…

Which Refrigeration System is Best for Your School?

ERIC Educational Resources Information Center

Little, Philip F.

1963-01-01

Several types of refrigeration systems available to the consulting engineer are discussed. The engineer should analyze all energy sources and base his recommendations on comparative costs and availability of sources, keeping in mind that operating costs are of primary importance to schools. The analysis begins with a careful appraisal of the…

Low-cost solar array project and Proceedings of the 15th Project Integration Meeting

NASA Technical Reports Server (NTRS)

1980-01-01

Progress made by the Low-Cost Solar Array Project during the period December 1979 to April 1980 is described. Project analysis and integration, technology development in silicon material, large area silicon sheet and encapsulation, production process and equipment development, engineering, and operation are included.

Equivalent Mass versus Life Cycle Cost for Life Support Technology Selection

NASA Technical Reports Server (NTRS)

Jones, Harry

2003-01-01

The decision to develop a particular life support technology or to select it for flight usually depends on the cost to develop and fly it. Other criteria - performance, safety, reliability, crew time, and risk - are considered, but cost is always an important factor. Because launch cost accounts for most of the cost of planetary missions, and because launch cost is directly proportional to the mass launched, equivalent mass has been used instead of cost to select life support technology. The equivalent mass of a life support system includes the estimated masses of the hardware and of the pressurized volume, power supply, and cooling system that the hardware requires. The equivalent mass is defined as the total payload launch mass needed to provide and support the system. An extension of equivalent mass, Equivalent System Mass (ESM), has been established for use in Advanced Life Support. A crew time mass-equivalent and sometimes other non-mass factors are added to equivalent mass to create ESM. Equivalent mass is an estimate of the launch cost only. For earth orbit rather than planetary missions, the launch cost is usually exceeded by the cost of Design, Development, Test, and Evaluation (DDT&E). Equivalent mass is used only in life support analysis. Life Cycle Cost (LCC) is much more commonly used. LCC includes DDT&E, launch, and operations costs. Since LCC includes launch cost, it is always a more accurate cost estimator than equivalent mass. The relative costs of development, launch, and operations vary depending on the mission design, destination, and duration. Since DDT&E or operations may cost more than launch, LCC may give a more accurate cost ranking than equivalent mass. To be sure of identifying the lowest cost technology for a particular mission, we should use LCC rather than equivalent mass.

Current situation of oil refinery in Bulgaria

NASA Astrophysics Data System (ADS)

Vershkova, Elena; Petkova, Petinka; Grinkevich, Anastasia

2016-09-01

This article deals with the classification approach for oil refineries in international practices. Criteria of refinery estimation group, including its financial status estimation, have been investigated. The analysis object is “Lukoil Neftochim Bourgas” AD (LNCHB) activity. This company is a leading enterprise in Bulgaria. The analysis of LNCHB operating: energy intensity index; index of operating costs and return on investment index have been performed.

Optimization of wastewater treatment plant operation for greenhouse gas mitigation.

PubMed

Kim, Dongwook; Bowen, James D; Ozelkan, Ertunga C

2015-11-01

This study deals with the determination of optimal operation of a wastewater treatment system for minimizing greenhouse gas emissions, operating costs, and pollution loads in the effluent. To do this, an integrated performance index that includes three objectives was established to assess system performance. The ASMN_G model was used to perform system optimization aimed at determining a set of operational parameters that can satisfy three different objectives. The complex nonlinear optimization problem was simulated using the Nelder-Mead Simplex optimization algorithm. A sensitivity analysis was performed to identify influential operational parameters on system performance. The results obtained from the optimization simulations for six scenarios demonstrated that there are apparent trade-offs among the three conflicting objectives. The best optimized system simultaneously reduced greenhouse gas emissions by 31%, reduced operating cost by 11%, and improved effluent quality by 2% compared to the base case operation. Copyright © 2015 Elsevier Ltd. All rights reserved.

A 20 Year Lifecycle Study for Launch Facilities at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Kolody, Mark R.; Li. Wenyan; Hintze, Paul E.; Calle, Luz-Marina

2009-01-01

The lifecycle cost analysis was based on corrosion costs for the Kennedy Space Center's Launch Complexes and Mobile Launch Platforms. The first step in the study involved identifying the relevant assets that would be included. Secondly, the identification and collection of the corrosion control cost data for the selected assets was completed. Corrosion control costs were separated into four categories. The sources of cost included the NASA labor for civil servant personnel directly involved in overseeing and managing corrosion control of the assets, United Space Alliance (USA) contractual requirements for performing planned corrosion control tasks, USA performance of unplanned corrosion control tasks, and Testing and Development. Corrosion control operations performed under USA contractual requirements were the most significant contributors to the total cost of corrosion. The operations include the inspection of the pad, routine maintenance of the pad, medium and large scale blasting and repainting activities, and the repair and replacement of structural metal elements. Cost data was collected from the years between 2001 and 2007. These costs were then extrapolated to future years to calculate the 20 year lifecycle costs.

Assessing administrative costs of mental health and substance abuse services.

PubMed

Broyles, Robert W; Narine, Lutchmie; Robertson, Madeline J

2004-05-01

Increasing competition in the market for mental health and substance abuse MHSA services and the potential to realize significant administrative savings have created an imperative to monitor, evaluate, and control spending on administrative functions. This paper develops a generic model that evaluates spending on administrative personnel by a group of providers. The precision of the model is demonstrated by examining a set of data assembled from five MHSA service providers. The model examines a differential cost construction derived from inter-facility comparisons of administrative expenses. After controlling for the scale of operations, the results enable MHSA programs to control the efficiency of administrative personnel and related rates of compensation. The results indicate that the efficiency of using the administrative complement and the scale of operations represent the lion's share of the total differential cost. The analysis also indicates that a modest improvement in the use of administrative personnel results in substantial cost savings, an increase in the net cash flow derived from operations, an improvement in the fiscal performance of the provider, and a decline in opportunity costs that assume the form of foregone direct patient care.

Integrated operations/payloads/fleet analysis. Volume 2: Payloads

NASA Technical Reports Server (NTRS)

1971-01-01

The payloads for NASA and non-NASA missions of the integrated fleet are analyzed to generate payload data for the capture and cost analyses for the period 1979 to 1990. Most of the effort is on earth satellites, probes, and planetary missions because of the space shuttle's ability to retrieve payloads for repair, overhaul, and maintenance. Four types of payloads are considered: current expendable payload; current reusable payload; low cost expendable payload, (satellite to be used with expendable launch vehicles); and low cost reusable payload (satellite to be used with the space shuttle/space tug system). Payload weight analysis, structural sizing analysis, and the influence of mean mission duration on program cost are also discussed. The payload data were computerized, and printouts of the data for payloads for each program or mission are included.

EBT reactor systems analysis and cost code: description and users guide (Version 1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Santoro, R.T.; Uckan, N.A.; Barnes, J.M.

1984-06-01

An ELMO Bumpy Torus (EBT) reactor systems analysis and cost code that incorporates the most recent advances in EBT physics has been written. The code determines a set of reactors that fall within an allowed operating window determined from the coupling of ring and core plasma properties and the self-consistent treatment of the coupled ring-core stability and power balance requirements. The essential elements of the systems analysis and cost code are described, along with the calculational sequences leading to the specification of the reactor options and their associated costs. The input parameters, the constraints imposed upon them, and the operatingmore » range over which the code provides valid results are discussed. A sample problem and the interpretation of the results are also presented.« less

Final Report of the AMC Committee-Armament. Armament Development Center Concept Plan. Volume 2

DTIC Science & Technology

1974-12-01

Considerations 111-22 Section C Operational Considerations 111-26 Section D Community Economic Impact 111-35 Statements Section E Delphi Benefit Analysis 111-37...Cost Analysis 111-3 B Personnel Considerations III-22 C Operational Considerations 111-26 D Community Economic Impact Statements 111-35 E Delphi ...sidered to be minimal. 111-36 S SECTION E. Delphi Benefit Analysis 1. Introduction. The assessment and comparison of the relative benefits of the various

Reaffirming Some Basic Principles in Purchasing and Maintenance.

ERIC Educational Resources Information Center

Throop, Harold L., Jr.

1985-01-01

Reaffirms necessary elements for the successful operation of college purchasing and maintenance programs (e.g., purchasing calendar, bidding procedures, vendor selection, contracting services, budgeting for maintenance, and workforce analysis). Discusses ways some colleges are saving on operating costs (e.g., solar energy, energy management,…

Cost analysis of prophylactic intraoperative cystoscopic ureteral stents in gynecologic surgery.

PubMed

Fanning, James; Fenton, Bradford; Jean, Geraldine Marie; Chae, Clara

2011-12-01

Prophylactic intraoperative ureteral stent placement is performed to decrease operative ureteric injury, though few data are available on the effectiveness of this procedure, and no data are available on its cost. To analyze the cost of prophylactic intraoperative cystoscopic ureteral stents in gynecologic surgery. All cases of prophylactic ureteral stent placement performed in gynecologic surgery during a 1-year period were identified and retrospectively reviewed through the electronic medical records database of Summa Health System. Costs were obtained through the Healthcare Cost Accounting System. The principles of cost-effective analysis were used (ie, explicit and detailed descriptions of costs and cost-effectiveness statistics). Importantly, we evaluated cost and not charges or financial model estimates. In addition, we obtained the contribution margins (ie, the hospital's net profit or loss) for prophylactic ureteral stent placement. Other gynecologic procedures were also analyzed. Among 792 major inpatient gynecologic procedures, 18 cases of prophylactic intraoperative ureteral stents were identified. Median costs were as follows: additional cost of prophylactic intraoperative ureteral stenting, $1580; additional cost of surgical resources, $770; cost of ureteral catheters, $427; cost of surgeons, $383. The contribution margins per case for various gynecologic surgical procedures were as follows: oophorectomy, $2804 profit; abdominal hysterectomy, $2649 profit; laparoscopically assisted vaginal hysterectomy (LAVH), $1760 profit. When intraoperative ureteral stenting was added, the contribution margins changed to the following: oophorectomy, $782 profit; abdominal hysterectomy, $627 profit; LAVH, $262 loss. Overall, the contribution margin profit was decreased by about 85%, from $2400 to $380. Prophylactic intraoperative ureteral stenting in gynecologic surgery decreases a hospital's contribution margin. Because of the expense of this procedure, as well as scientific data suggesting a lack of effectiveness, the authors argue that prophylactic intraoperative ureteral stenting should not be used in gynecologic surgery to decrease operative ureteric injury.

Integrated Surveys of Neglected Tropical Diseases in Southern Sudan: How Much Do They Cost and Can They Be Refined?

PubMed Central

Kolaczinski, Jan H.; Hanson, Kara; Robinson, Emily; Picon, Diana; Sabasio, Anthony; Mpakateni, Martin; Lado, Mounir; Moore, Stephen; Petty, Nora; Brooker, Simon

2010-01-01

Background Increasing emphasis on integrated control of neglected tropical diseases (NTDs) requires identification of co-endemic areas. Integrated surveys for lymphatic filariasis (LF), schistosomiasis and soil-transmitted helminth (STH) infection have been recommended for this purpose. Integrated survey designs inevitably involve balancing the costs of surveys against accuracy of classifying areas for treatment, so-called implementation units (IUs). This requires an understanding of the main cost drivers and of how operating procedures may affect both cost and accuracy of surveys. Here we report a detailed cost analysis of the first round of integrated NTD surveys in Southern Sudan. Methods and Findings Financial and economic costs were estimated from financial expenditure records and interviews with survey staff using an ingredients approach. The main outcome was cost per IU surveyed. Uncertain variables were subjected to univariate sensitivity analysis and the effects of modifying standard operating procedures were explored. The average economic cost per IU surveyed was USD 40,206 or USD 9,573, depending on the size of the IU. The major cost drivers were two key categories of recurrent costs: i) survey consumables, and ii) personnel. Conclusion The cost of integrated surveys in Southern Sudan could be reduced by surveying larger administrative areas for LF. If this approach was taken, the estimated economic cost of completing LF, schistosomiasis and STH mapping in Southern Sudan would amount to USD 1.6 million. The methodological detail and costing template provided here could be used to generate cost estimates in other settings and readily compare these to the present study, and may help budget for integrated and single NTDs surveys elsewhere. PMID:20644619

Real-time automated failure analysis for on-orbit operations

NASA Technical Reports Server (NTRS)

Kirby, Sarah; Lauritsen, Janet; Pack, Ginger; Ha, Anhhoang; Jowers, Steven; Mcnenny, Robert; Truong, The; Dell, James

1993-01-01

A system which is to provide real-time failure analysis support to controllers at the NASA Johnson Space Center Control Center Complex (CCC) for both Space Station and Space Shuttle on-orbit operations is described. The system employs monitored systems' models of failure behavior and model evaluation algorithms which are domain-independent. These failure models are viewed as a stepping stone to more robust algorithms operating over models of intended function. The described system is designed to meet two sets of requirements. It must provide a useful failure analysis capability enhancement to the mission controller. It must satisfy CCC operational environment constraints such as cost, computer resource requirements, verification, and validation. The underlying technology and how it may be used to support operations is also discussed.

Nonoperative versus operative treatment for thoracolumbar burst fractures without neurologic deficit: a meta-analysis.

PubMed

Gnanenthiran, Sonali R; Adie, Sam; Harris, Ian A

2012-02-01

Decision-making regarding nonoperative versus operative treatment of patients with thoracolumbar burst fractures in the absence of neurologic deficits is controversial. Lack of evidence-based practice may result in patients being treated inappropriately and being exposed to unnecessary adverse consequences. Using meta-analysis, we therefore compared pain (VAS) and function (Roland Morris Disability Questionnaire) in patients with thoracolumbar burst fractures without neurologic deficit treated nonoperatively and operatively. Secondary outcomes included return to work, radiographic progression of kyphosis, radiographic progression of spinal canal stenosis, complications, cost, and length of hospitalization. We searched MEDLINE, EMBASE(®), and the Cochrane Central Register of Controlled Trials for 'thoracic fractures', 'lumbar fractures', 'non-operative', 'operative' and 'controlled clinical trials'. We established five criteria for inclusion. Data extraction and quality assessment were in accordance with Cochrane Collaboration guidelines. The main analyses were performed on individual patient data from randomized controlled trials. Sensitivity analyses were performed on VAS pain, Roland Morris Disability Questionnaire score, kyphosis, and return to work, including data from nonrandomized controlled trials and using fixed effects meta-analysis. We identified four trials, including two randomized controlled trials consisting of 79 patients (41 with operative treatment and 38 with nonoperative treatment). The mean followups ranged from 24 to 118 months. We found no between-group differences in baseline pain, kyphosis, and Roland Morris Disability Questionnaire scores. At last followup, there were no between-group differences in pain, Roland Morris Disability Questionnaire scores, and return to work rates. We found an improvement in kyphosis ranging from means of 12.8º to 11º in the operative group, but surgery was associated with higher complication rates and costs. Operative management of thoracolumbar burst fractures without neurologic deficit may improve residual kyphosis, but does not appear to improve pain or function at an average of 4 years after injury and is associated with higher complication rates and costs. Level II, therapeutic study. See the Guidelines for Authors for a complete description of level of evidence.

Rotorcraft Low Altitude CNS (Communications, Navigation and Surveillance) Benefit/Cost Analysis, Rotorcraft Operations Data

DTIC Science & Technology

1989-09-01

inventory of rotorcraft activity by mission and location. 17. Key Words 18. Distribution Statement Helicopter Helicopter Missions This document is available...helicopter is used to transport skiers /hikers to remote, normally inaccessible places. This mission is performed in rural or wilderness areas at altitudes...their applicability to the CNS benefit/cost analysis. Because of the uncertainty in the knowledge of the characteristics of both current and future

Analysis and evaluation of process and equipment in tasks 2 and 4 of the Low Cost Solar Array project

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1978-01-01

Several experimental and projected Czochralski crystal growing process methods were studied and compared to available operations and cost-data of recent production Cz-pulling, in order to elucidate the role of the dominant cost contributing factors. From this analysis, it becomes apparent that substantial cost reductions can be realized from technical advancements which fall into four categories: an increase in furnace productivity; the reduction of crucible cost through use of the crucible for the equivalent of multiple state-of-the-art crystals; the combined effect of several smaller technical improvements; and a carry over effect of the expected availability of semiconductor grade polysilicon at greatly reduced prices. A format for techno-economic analysis of solar cell production processes was developed, called the University of Pennsylvania Process Characterization (UPPC) format. The accumulated Cz process data are presented.

Resident education in robotic-assisted vertical sleeve gastrectomy: outcomes and cost-analysis of 411 consecutive cases.

PubMed

Ecker, Brett L; Maduka, Richard; Ramdon, Andre; Dempsey, Daniel T; Dumon, Kristoffel R; Williams, Noel N

2016-02-01

Robotic technology is increasingly prevalent in bariatric surgery, yet there are national deficiencies in exposure of surgical residents to robotic techniques. The purpose of this study is to accurately characterize the perioperative outcomes of a resident teaching model using the robotic-assisted sleeve gastrectomy. University Hospital. We identified 411 consecutive patients who underwent robotic sleeve gastrectomy at our institution from a prospectively maintained administrative database. Perioperative morbidity, operative time, and supply cost of the procedure were analyzed. Mean operative time was 96.4±24.9 minutes; mean robot usage time was 63.9 minutes (range 30.0-122.0 min). Ninety-day morbidities included reoperation (0.72%), major bleeding complications (0.48%), staple line leak (0.24%), stricture (0.97%), need for blood transfusion (3.86%), surgical site infection (1.69%), deep vein thrombosis (0.48%), and pulmonary embolism (0.48%). Mortality was nil. The resident cohort achieved operative time plateaus after five consecutive cases. Subset analysis for fiscal year 2014 demonstrated significantly increased supply cost for robotic sleeve gastrectomy compared with its laparoscopic equivalent. Robotic-assisted sleeve gastrectomy can be instituted as a model for resident robotic education with rates of morbidity and operative times equivalent to historical laparoscopic controls. The robot's enhanced ergonomics and its opportunity for resident education must be weighed against its increased supply cost. Copyright © 2016 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

Spacecraft platform cost estimating relationships

NASA Technical Reports Server (NTRS)

Gruhl, W. M.

1972-01-01

The three main cost areas of unmanned satellite development are discussed. The areas are identified as: (1) the spacecraft platform (SCP), (2) the payload or experiments, and (3) the postlaunch ground equipment and operations. The SCP normally accounts for over half of the total project cost and accurate estimates of SCP costs are required early in project planning as a basis for determining total project budget requirements. The development of single formula SCP cost estimating relationships (CER) from readily available data by statistical linear regression analysis is described. The advantages of single formula CER are presented.

A Cost-Effectiveness Analysis of Blended Versus Face-to-Face Delivery of Evidence-Based Medicine to Medical Students

PubMed Central

Nicklen, Peter; Rivers, George; Foo, Jonathan; Ooi, Ying Ying; Reeves, Scott; Walsh, Kieran; Ilic, Dragan

2015-01-01

Background Blended learning describes a combination of teaching methods, often utilizing digital technologies. Research suggests that learner outcomes can be improved through some blended learning formats. However, the cost-effectiveness of delivering blended learning is unclear. Objective This study aimed to determine the cost-effectiveness of a face-to-face learning and blended learning approach for evidence-based medicine training within a medical program. Methods The economic evaluation was conducted as part of a randomized controlled trial (RCT) comparing the evidence-based medicine (EBM) competency of medical students who participated in two different modes of education delivery. In the traditional face-to-face method, students received ten 2-hour classes. In the blended learning approach, students received the same total face-to-face hours but with different activities and additional online and mobile learning. Online activities utilized YouTube and a library guide indexing electronic databases, guides, and books. Mobile learning involved self-directed interactions with patients in their regular clinical placements. The attribution and differentiation of costs between the interventions within the RCT was measured in conjunction with measured outcomes of effectiveness. An incremental cost-effectiveness ratio was calculated comparing the ongoing operation costs of each method with the level of EBM proficiency achieved. Present value analysis was used to calculate the break-even point considering the transition cost and the difference in ongoing operation cost. Results The incremental cost-effectiveness ratio indicated that it costs 24% less to educate a student to the same level of EBM competency via the blended learning approach used in the study, when excluding transition costs. The sunk cost of approximately AUD $40,000 to transition to the blended model exceeds any savings from using the approach within the first year of its implementation; however, a break-even point is achieved within its third iteration and relative savings in the subsequent years. The sensitivity analysis indicates that approaches with higher transition costs, or staffing requirements over that of a traditional method, are likely to result in negative value propositions. Conclusions Under the study conditions, a blended learning approach was more cost-effective to operate and resulted in improved value for the institution after the third year iteration, when compared to the traditional face-to-face model. The wider applicability of the findings are dependent on the type of blended learning utilized, staffing expertise, and educational context. PMID:26197801

Cost Analysis of an Office-based Surgical Suite

PubMed Central

LaBove, Gabrielle

2016-01-01

Introduction: Operating costs are a significant part of delivering surgical care. Having a system to analyze these costs is imperative for decision making and efficiency. We present an analysis of surgical supply, labor and administrative costs, and remuneration of procedures as a means for a practice to analyze their cost effectiveness; this affects the quality of care based on the ability to provide services. The costs of surgical care cannot be estimated blindly as reconstructive and cosmetic procedures have different percentages of overhead. Methods: A detailed financial analysis of office-based surgical suite costs for surgical procedures was determined based on company contract prices and average use of supplies. The average time spent on scheduling, prepping, and doing the surgery was factored using employee rates. Results: The most expensive, minor procedure supplies are suture needles. The 4 most common procedures from the most expensive to the least are abdominoplasty, breast augmentation, facelift, and lipectomy. Conclusions: Reconstructive procedures require a greater portion of collection to cover costs. Without the adjustment of both patient and insurance remuneration in the practice, the ability to provide quality care will be increasingly difficult. PMID:27536482

A Spatial-Economic Cost-Reduction Pathway Analysis for U.S. Offshore Wind Energy Development from 2015-2030

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beiter, Philipp; Stehly, Tyler

The potential for cost reduction and economic viability for offshore wind varies considerably within the United States. This analysis models the cost impact of a range of offshore wind locational cost variables across more than 7,000 potential coastal sites in the United States' offshore wind resource area. It also assesses the impact of over 50 technology innovations on potential future costs between 2015 and 2027 (Commercial Operation Date) for both fixed-bottom and floating wind systems. Comparing these costs to an initial assessment of local avoided generating costs, this analysis provides a framework for estimating the economic potential for offshore wind.more » Analyzing economic potential within this framework can help establish a refined understanding across industries of the technology and site-specific risks and opportunities associated with future offshore wind development. The findings from the original report indicate that under the modeled scenario, offshore wind can be expected to achieve significant cost reductions and may approach economic viability in some parts of the United States within the next 15 years.« less

Development of Activity-based Cost Functions for Cellulase, Invertase, and Other Enzymes

NASA Astrophysics Data System (ADS)

Stowers, Chris C.; Ferguson, Elizabeth M.; Tanner, Robert D.

As enzyme chemistry plays an increasingly important role in the chemical industry, cost analysis of these enzymes becomes a necessity. In this paper, we examine the aspects that affect the cost of enzymes based upon enzyme activity. The basis for this study stems from a previously developed objective function that quantifies the tradeoffs in enzyme purification via the foam fractionation process (Cherry et al., Braz J Chem Eng 17:233-238, 2000). A generalized cost function is developed from our results that could be used to aid in both industrial and lab scale chemical processing. The generalized cost function shows several nonobvious results that could lead to significant savings. Additionally, the parameters involved in the operation and scaling up of enzyme processing could be optimized to minimize costs. We show that there are typically three regimes in the enzyme cost analysis function: the low activity prelinear region, the moderate activity linear region, and high activity power-law region. The overall form of the cost analysis function appears to robustly fit the power law form.

Implementation of enhanced recovery programme for laparoscopic distal pancreatectomy: feasibility, safety and cost analysis.

PubMed

Richardson, John; Di Fabio, Francesco; Clarke, Hannah; Bajalan, Mohammed; Davids, Joe; Abu Hilal, Mohammed

2015-01-01

The adoption of laparoscopy for distal pancreatectomy has proven to substantially improve short-term outcomes. Stress response after major surgery can be further minimized within an enhanced recovery programme (ERP). However, data on the potential benefit of an ERP for laparoscopic distal pancreatectomy are still lacking. The aim was to assess the feasibility, safety and cost of ERP for patients undergoing laparoscopic distal pancreatectomy. This is a case-control study from a Tertiary University Hospital. Sixty-six consecutive patients who underwent laparoscopic distal pancreatectomy were analyzed. Twenty-two patients were enrolled for the ERP and compared with previous consecutive 44 patients managed traditionally (1:2 ratio). Operative details, post-operative outcome and cost analysis were compared in the two groups. Patients enrolled in the ERP had similar intraoperative blood loss (median 165 ml vs. 200 ml; p = 0.176), operation time (225 min vs. 210 min; p = 0.633), time to remove naso-gastric tube (1 vs. 1 day; p = 0.081) but significantly shorter time to mobilization (median 1 vs. 2 days; p = 0.0001), start solid diet (2 vs. 3 days; p = 0004), and pass stools (3 vs. 5 days; p = 0.002) compared to the control group. Median length of stay was significantly shorter in the ERP group (3 vs. 6 days; p < 0.0001). No significant difference in readmission or complication rate was observed. Cost analysis was significantly in favor of the ERP group (p = 0.0004). Implementation of ERP optimizes outcomes for laparoscopic distal pancreatectomy with significant earlier return to normal gut function, reduced length of stay and cost saving. Copyright © 2015 IAP and EPC. Published by Elsevier B.V. All rights reserved.

Cost analysis of carbon dioxide concentrators

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1972-01-01

A methodology is developed to predict the relevant contributions of the more intangible cost elements encountered in the development of flight-qualified hardware and is used to predict the costs of three carbon dioxide concentration systems. The cost and performance data from Gemini, Skylab, and other programs are utilized as a basis for establishing the cost estimating relationships. The concentration systems analyzed are the molecular sieves C02 concentrator, the hydrogen-depolarized concentrator, and the regenerable solid desiccant concentrator. Besides the cost estimates for each system, their comparative criteria including relative characteristics, operational differences, and development status are considered.

Economic analysis of medical management applied for left colostomy.

PubMed

Savlovschi, C; Serban, D; Andreescu, Cv; Dascalu, Am; Pantu, H

2013-01-01

This paper presents an analysis of surgical treatment costs for left colostomy, aiming to calculate a medium cost per procedure and to identify the means to maximize the economic management of this type of surgicale procedure. A retrospective study was conducted on a group of 8 patients hospitalized in the 4th Surgery Department,Emergency University Hospital Bucharest, during the year 2012 for left colic neoplasms with obstruction signs that were operated on with a left colostomy. The followed parameters in the studied group of patients were represented by medical expenses, divided in: preoperative, intra-operative and immediate postoperative (postop. hospitalization). Two major types of colostomy were performed: left loop colostomy with intact tumour for 6 patients and left end colostomy and tumour resection (Hartmann's procedure) for 2 patients. The medium cost of this type of surgical intervention was 4396.807 RON, representing 1068.742 euro. Statistic data analysis didn't reveal average costs to vary with the type of procedure. The age of the study subjects was between 49 and 88, with an average of 61 years, without it being possible to establish a correlation between patient age and the level of medical spendings. Reducing the costs involved by left colostomy can be efficiently done by decreasing the number of days of hospitalisation in the following ways: preoperative preparation and assessment of the subject in an outpatient regimen; the accuracy of the surgical procedure with the decrease of early postoperative complications and antibiotherapy- the second major cause of increased postoperative costs. Celsius.

Evidence based medicine and surgical approaches for colon cancer: evidences, benefits and limitations of the laparoscopic vs open resection.

PubMed

Lorenzon, Laura; La Torre, Marco; Ziparo, Vincenzo; Montebelli, Francesco; Mercantini, Paolo; Balducci, Genoveffa; Ferri, Mario

2014-04-07

To report a meta-analysis of the studies that compared the laparoscopic with the open approach for colon cancer resection. Forty-seven manuscripts were reviewed, 33 of which employed for meta-analysis according to the PRISMA guidelines. The results were differentiated according to the study design (prospective randomized trials vs case-control series) and according to the tumor's location. Outcome measures included: (1) short-term results (operating times, blood losses, bowel function recovery, post-operative pain, return to the oral intake, complications and hospital stay); (2) oncological adequateness (number of nodes harvested in the surgical specimens); and (3) long-term results (including the survivals' rates and incidence of incisional hernias) and (4) costs. Meta-analysis of trials provided evidences in support of the laparoscopic procedures for a several short-term outcomes including: a lower blood loss, an earlier recovery of the bowel function, an earlier return to the oral intake, a shorter hospital stay and a lower morbidity rate. Opposite the operating time has been confirmed shorter in open surgery. The same trend has been reported investigating case-control series and cancer by sites, even though there are some concerns regarding the power of the studies in this latter field due to the small number of trials and the small sample of patients enrolled. The two approaches were comparable regarding the mean number of nodes harvested and long-term results, even though these variables were documented reviewing the literature but were not computable for meta-analysis. The analysis of the costs documented lower costs for the open surgery, however just few studies investigated the incidence of post-operative hernias. Laparoscopy is superior for the majority of short-term results. Future studies should better differentiate these approaches on the basis of tumors' location and the post-operative hernias.

An Analysis of Airline Costs. Lecture Notes for MIT Courses. 16.73 Airline Management and Marketing

NASA Technical Reports Server (NTRS)

Simpson, R. W.

1972-01-01

The cost analyst must understand the operations of the airline and how the activities of the airline are measured, as well as how the costs are incurred and recorded. The data source is usually a cost accounting process. This provides data on the cumulated expenses in various categories over a time period like a quarter, or year, and must be correlated by the analyst with cumulated measures of airline activity which seem to be causing this expense.

A cost-benefit/cost-effectiveness analysis of an unsanctioned supervised smoking facility in the Downtown Eastside of Vancouver, Canada.

PubMed

Jozaghi, Ehsan

2014-11-13

Smoking crack involves the risk of transmitting diseases such as HIV and hepatitis C (HCV). The current study determines whether the formerly unsanctioned supervised smoking facility (SSF)-operated by the grassroot organization, Vancouver Area Network of Drug Users (VANDU) for the last few years-costs less than the costs incurred for health-care services as a direct consequence of not having such a program in Vancouver, Canada. The data pertaining to the attendance at the SSF was gathered in 2012-2013 by VANDU. By relying on this data, a mathematical model was employed to estimate the number of HCV infections prevented by the former facility in Vancouver's Downtown Eastside (DTES). The DTES SSF's benefit-cost ratio was conservatively estimated at 12.1:1 due to its low operating cost. The study used 70% and 90% initial pipe-sharing rates for sensitivity analysis. At 80% sharing rate, the marginal HCV cases prevented were determined to be 55 cases. Moreover, at 80% sharing rate, the marginal cost-effectiveness ratio ranges from $1,705 to $97,203. The results from both the baseline and sensitivity analysis demonstrated that the establishment of the SSF by VANDU on average had annually saved CAD$1.8 million dollars in taxpayer's money. Funding SSFs in Vancouver is an efficient and effective use of financial resources in the public health domain; therefore, Vancouver Coastal Health should actively participate in their establishment in order to reduce HCV and other blood-borne infections such as HIV within the non-injecting drug users.

Operational Energy Metrics: Increasing Flexibility While Reducing Vulnerability

DTIC Science & Technology

2010-03-01

procurement decisions with a greater level of fidelity concerning the cost- benefit analysis for systems lifetime cost of energy. Furthermore, it...or we have to RTB, we’re BINGO -fuel48”? As General Ronald Keys, USAF (RET.) stated when discussing energy efficiency and mission effectiveness...of Defense change to fully value the delivered cost of fuel, the sooner joint force commanders will reap the “strategic benefits of reallocating

An Analysis of the Potential Impacts of Ashton Carter’s Should-Cost Memorandum on Defense Contracting

DTIC Science & Technology

2012-09-17

monopolistic contractors that match distinctive government requirements. Figure 4 portrays the differences found in pure competitive commercial markets ...operate in quasi-competitive environments. Such arenas are characterized as oligopolistic or monopolistic markets . Table 6. Top 10 Companies by...practice will be used to build sufficient cost knowledge of those services within that market segment. You will employ that cost knowledge to inform

COST FUNCTION STUDIES FOR POWER REACTORS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heestand, J.; Wos, L.T.

1961-11-01

A function to evaluate the cost of electricity produced by a nuclear power reactor was developed. The basic equation, revenue = capital charges + profit + operating expenses, was expanded in terms of various cost parameters to enable analysis of multiregion nuclear reactors with uranium and/or plutonium for fuel. A corresponding IBM 704 computer program, which will compute either the price of electricity or the value of plutonium, is presented in detail. (auth)

Economics of hydrogen production and liquefaction updated to 1980

NASA Technical Reports Server (NTRS)

Baker, C. R.

1979-01-01

Revised costs for generating and liquefying hydrogen in mid-1980 are presented. Plant investments were treated as straight-forward escalations resulting from inflation. Operating costs, however, were derived in terms of the unit cost of coal, fuel gas and electrical energy to permit the determination of the influence of these parameters on the cost of liquid hydrogen. Inflationary influence was recognized by requiring a 15% discounted rate of return on investment for Discounted Cash Flow financing analysis, up from 12% previously. Utility financing was revised to require an 11% interest rate on debt. The scope of operation of the hydrogen plant was revised from previous studies to include only the hydrogen generation and liquefaction facilities. On-site fuel gas and power generation, originally a part of the plant complex, was eliminated. Fuel gas and power are now treated as purchased utilities. Costs for on-site generation of fuel gas however, are included.

SEATSAT programs option analysis

NASA Technical Reports Server (NTRS)

Luckl, L.

1976-01-01

A preliminary analysis of the costs of SEASAT follow-on options is presented. All the options assume the existence of SEASAT-A as currently defined in the SEASAT Economic Assessment. It is assumed that each option will continue through the year 2000 and approach operational system status in the 1983-1986 period, depending upon the sensor package selected. The launch vehicle assumed through 1983 is the Atlas Agena. After 1983, it is assumed SEASAT-A will switch to the use of the Space Shuttle. All cost estimates are 1976 dollars for fiscal year cost accounting, with no inflation rate included.

Uncertainty analysis and global sensitivity analysis of techno-economic assessments for biodiesel production.

PubMed

Tang, Zhang-Chun; Zhenzhou, Lu; Zhiwen, Liu; Ningcong, Xiao

2015-01-01

There are various uncertain parameters in the techno-economic assessments (TEAs) of biodiesel production, including capital cost, interest rate, feedstock price, maintenance rate, biodiesel conversion efficiency, glycerol price and operating cost. However, fewer studies focus on the influence of these parameters on TEAs. This paper investigated the effects of these parameters on the life cycle cost (LCC) and the unit cost (UC) in the TEAs of biodiesel production. The results show that LCC and UC exhibit variations when involving uncertain parameters. Based on the uncertainty analysis, three global sensitivity analysis (GSA) methods are utilized to quantify the contribution of an individual uncertain parameter to LCC and UC. The GSA results reveal that the feedstock price and the interest rate produce considerable effects on the TEAs. These results can provide a useful guide for entrepreneurs when they plan plants. Copyright © 2014 Elsevier Ltd. All rights reserved.

The cost effectiveness of elective laparoscopic sigmoid resection for symptomatic diverticular disease: financial outcome of the randomized control Sigma trial.

PubMed

Klarenbeek, Bastiaan R; Coupé, Veerle M H; van der Peet, Donald L; Cuesta, Miguel A

2011-03-01

Direct healthcare costs of patients with symptomatic diverticular disease randomized for either laparoscopic or open elective sigmoid resection are compared. Cost-effectiveness analysis of the laparoscopic approach compared with open sigmoid resections is presented. An economic evaluation of the randomized control Sigma trial was conducted, comparing elective laparoscopic sigmoid resection (LSR) to open sigmoid resection (OSR) in patients with symptomatic diverticulitis. Prospective registration of detailed intervention units per patient resulted in actual resource use per individual patient. To avoid distributional assumptions, the nonparametric bootstrap was applied. For the cost-effectiveness analysis, differences in total cost between LSR and OSR were compared with the differences in VAS pain score, SF-36 values for general health, and complication rate. The difference in total healthcare costs between the group that received LSR (euro 9969) and the group that received OSR (euro 9366) was not statistically significant. The slight increase in total costs was determined mainly by the significantly higher operation costs of LSR (euro 6663 vs. euro 5306). Lower costs for hospitalization (euro 2983 vs. euro 3598), blood products (euro 87 vs. euro 240), paramedical services (euro 157 vs. euro 278), and emergency attendance (euro 72 vs. euro 115) in the LSR group partially compensated these increased operation costs. The incremental cost-effectiveness ratios (ICER) indicate that improvements in pain, quality of life, and complication rate could be achieved at limited costs. Total healthcare costs of laparoscopic and open elective sigmoid resections for symptomatic diverticular disease are similar. As the clinical outcomes are in favor of the LSR group, candidates for an elective sigmoid resection should preferably be approached laparoscopically.

The impact of complications on costs of major surgical procedures: a cost analysis of 1200 patients.

PubMed

Vonlanthen, René; Slankamenac, Ksenija; Breitenstein, Stefan; Puhan, Milo A; Muller, Markus K; Hahnloser, Dieter; Hauri, Dimitri; Graf, Rolf; Clavien, Pierre-Alain

2011-12-01

To assess the impact of postoperative complications on full in-hospital costs per case. Rising expenses for complex medical procedures combined with constrained resources represent a major challenge. The severity of postoperative complications reflects surgical outcomes. The magnitude of the cost created by negative outcomes is unclear. Morbidity of 1200 consecutive patients undergoing major surgery from 2005 to 2008 in a tertiary, high-volume center was assessed by a validated, complication score system. Full in-hospital costs were collected for each patient. Statistical analysis was performed using a multivariate linear regression model adjusted for potential confounders. This study population included 393 complex liver/bile duct surgeries, 110 major pancreas operations, 389 colon resections, and 308 Roux-en-Y gastric bypasses. The overall 30-day mortality rate was 1.8%, whereas morbidity was 53.8%. Patients with an uneventful course had mean costs per case of US$ 27,946 (SD US$ 15,106). Costs increased dramatically with the severity of postoperative complications and reached the mean costs of US$ 159,345 (SD US$ 151,191) for grade IV complications. This increase in costs, up to 5 times the cost of a similar operation without complications, was observed for all types of investigated procedures, although the magnitude of the increase varied, with the highest costs in patients undergoing pancreas surgery. This study demonstrates the dramatic impact of postoperative complications on full in-hospital costs per case and that complications are the strongest indicator of costs. Furthermore, the study highlights a relevant savings capacity for major surgical procedures, and supports all efforts to lower negative events in the postoperative course.

Cost Analysis of an Air Brayton Receiver for a Solar Thermal Electric Power System in Selected Annual Production Volumes

NASA Technical Reports Server (NTRS)

1981-01-01

Pioneer Engineering and Manufacturing Company estimated the cost of manufacturing and Air Brayton Receiver for a Solar Thermal Electric Power System as designed by the AiResearch Division of the Garrett Corporation. Production costs were estimated at annual volumes of 100; 1,000; 5,000; 10,000; 50,000; 100,000 and 1,000,000 units. These costs included direct labor, direct material and manufacturing burden. A make or buy analysis was made of each part of each volume. At high volumes special fabrication concepts were used to reduce operation cycle times. All costs were estimated at an assumed 100% plant capacity. Economic feasibility determined the level of production at which special concepts were to be introduced. Estimated costs were based on the economics of the last half of 1980. Tooling and capital equipment costs were estimated for ach volume. Infrastructure and personnel requirements were also estimated.

Design integration for minimal energy and cost

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halldane, J.E.

The authors present requirements for creating alternative energy conserving designs including energy management and architectural, plumbing, mechanical, electrical, electronic and optical design. Parameters of power, energy, life cycle costs and benefit for resource for an evaluation by the interested parties are discussed. They present an analysis of power systems through a seasonal power distribution diagram. An analysis of cost systems includes capital cost from the power components, annual costs from the utility energy use, and finance costs with loans, taxes, settlement and design fees. Equations are transposed to the evaluative parameter and are uniquely explicit with consistent symbols, parameter definitions,more » dual and balanced units, unit conversions, criteria for operation, incorporated constants for rapid calculations, references to data in the handbook, other common terms, and instrumentation for the measurement. Each component equation has a key power diagram.« less

DORCA 2 computer program. Volume 2: Programmer's manual

NASA Technical Reports Server (NTRS)

Gold, B. J.

1972-01-01

A guide for coding the Dynamic Operational Requirements and Cost Analysis Program (DORCA 2) is presented. The manual provides a detailed operation of every subroutine, the layout in core of the major matrices and arrays, and the meaning of all program values. Flow charts are included.

Towards microalgal triglycerides in the commodity markets.

PubMed

Benvenuti, Giulia; Ruiz, Jesús; Lamers, Packo P; Bosma, Rouke; Wijffels, René H; Barbosa, Maria J

2017-01-01

Microalgal triglycerides (TAGs) hold great promise as sustainable feedstock for commodity industries. However, to determine research priorities and support business decisions, solid techno-economic studies are essential. Here, we present a techno-economic analysis of two-step TAG production (growth reactors are operated in continuous mode such that multiple batch-operated stress reactors are inoculated and harvested sequentially) for a 100-ha plant in southern Spain using vertically stacked tubular photobioreactors. The base case is established with outdoor pilot-scale data and based on current process technology. For the base case, production costs of 6.7 € per kg of biomass containing 24% TAG (w/w) were found. Several scenarios with reduced production costs were then presented based on the latest biological and technological advances. For instance, much effort should focus on increasing the photosynthetic efficiency during the stress and growth phases, as this is the most influential parameter on production costs (30 and 14% cost reduction from base case). Next, biological and technological solutions should be implemented for a reduction in cooling requirements (10 and 4.5% cost reduction from base case when active cooling is avoided and cooling setpoint is increased, respectively). When implementing all the suggested improvements, production costs can be decreased to 3.3 € per kg of biomass containing 60% TAG (w/w) within the next 8 years. With our techno-economic analysis, we indicated a roadmap for a substantial cost reduction. However, microalgal TAGs are not yet cost efficient when compared to their present market value. Cost-competiveness strictly relies on the valorization of the whole biomass components and on cheaper PBR designs (e.g. plastic film flat panels). In particular, further research should focus on the development and commercialization of PBRs where active cooling is avoided and stable operating temperatures are maintained by the water basin in which the reactor is placed.

NREL Analysis Identifies Where Commercial Customers Might Benefit from

Science.gov Websites

Battery Energy Storage | NREL | News | NREL NREL Analysis Identifies Where Commercial Customers Might Benefit from Battery Energy Storage News Release: NREL Analysis Identifies Where Commercial reduce operating costs for customers paying demand charges Commercial electricity customers who are

Development of the IBSAL-SimMOpt Method for the Optimization of Quality in a Corn Stover Supply Chain

DOE PAGES

Chavez, Hernan; Castillo-Villar, Krystel; Webb, Erin

2017-08-01

Variability on the physical characteristics of feedstock has a relevant effect on the reactor’s reliability and operating cost. Most of the models developed to optimize biomass supply chains have failed to quantify the effect of biomass quality and preprocessing operations required to meet biomass specifications on overall cost and performance. The Integrated Biomass Supply Analysis and Logistics (IBSAL) model estimates the harvesting, collection, transportation, and storage cost while considering the stochastic behavior of the field-to-biorefinery supply chain. This paper proposes an IBSAL-SimMOpt (Simulation-based Multi-Objective Optimization) method for optimizing the biomass quality and costs associated with the efforts needed to meetmore » conversion technology specifications. The method is developed in two phases. For the first phase, a SimMOpt tool that interacts with the extended IBSAL is developed. For the second phase, the baseline IBSAL model is extended so that the cost for meeting and/or penalization for failing in meeting specifications are considered. The IBSAL-SimMOpt method is designed to optimize quality characteristics of biomass, cost related to activities intended to improve the quality of feedstock, and the penalization cost. A case study based on 1916 farms in Ontario, Canada is considered for testing the proposed method. Analysis of the results demonstrates that this method is able to find a high-quality set of non-dominated solutions.« less

Development of the IBSAL-SimMOpt Method for the Optimization of Quality in a Corn Stover Supply Chain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chavez, Hernan; Castillo-Villar, Krystel; Webb, Erin

Variability on the physical characteristics of feedstock has a relevant effect on the reactor’s reliability and operating cost. Most of the models developed to optimize biomass supply chains have failed to quantify the effect of biomass quality and preprocessing operations required to meet biomass specifications on overall cost and performance. The Integrated Biomass Supply Analysis and Logistics (IBSAL) model estimates the harvesting, collection, transportation, and storage cost while considering the stochastic behavior of the field-to-biorefinery supply chain. This paper proposes an IBSAL-SimMOpt (Simulation-based Multi-Objective Optimization) method for optimizing the biomass quality and costs associated with the efforts needed to meetmore » conversion technology specifications. The method is developed in two phases. For the first phase, a SimMOpt tool that interacts with the extended IBSAL is developed. For the second phase, the baseline IBSAL model is extended so that the cost for meeting and/or penalization for failing in meeting specifications are considered. The IBSAL-SimMOpt method is designed to optimize quality characteristics of biomass, cost related to activities intended to improve the quality of feedstock, and the penalization cost. A case study based on 1916 farms in Ontario, Canada is considered for testing the proposed method. Analysis of the results demonstrates that this method is able to find a high-quality set of non-dominated solutions.« less

Cost Analysis of CATV Components. Final Report.

ERIC Educational Resources Information Center

Weinberg, Gary

A research study was conducted for the Office of Telecommunications Policy to determine the capital outlay and operating costs of community antenna television (CATV) systems. Six major tasks were undertaken: 1) the development of a body of technical information about CATV; 2) the production of a complete work breakdown structure; 3) a cost…

Determinants of Employment Success Among Ex-Offenders

ERIC Educational Resources Information Center

Knox, George W.; Stacey, William A.

1978-01-01

Use of cost-benefit analysis in evaluation of seven manpower service programs for ex-offenders in Illinois shows these programs have benefit-cost ratios ranging from 4.24 to 16.88. Demographic profiles for the client flows differ somewhat, with Operation DARE's population being somewhat of a more "hard-core" group based on previous law…

Outcome and cost analysis of bilateral sequential same-day cartilage tympanoplasty compared with bilateral staged tympanoplasty.

PubMed

Olusesi, A D; Oyeniran, O

2017-05-01

Few studies have compared bilateral same-day with staged tympanoplasty using cartilage graft materials. A prospective randomised observational study was performed of 38 chronic suppurative otitis media patients (76 ears) who were assigned to undergo bilateral sequential same-day tympanoplasty (18 patients, 36 ears) or bilateral sequential tympanoplasty performed 3 months apart (20 patients, 40 ears). Disease duration, intra-operative findings, combined duration of surgery, post-operative graft appearance at 6 weeks, post-operative complications, re-do rate and relative cost of surgery were recorded. Tympanic membrane perforations were predominantly subtotal (p = 0.36, odds ratio = 0.75). Most grafts were harvested from the conchal cartilage and fewer from the tragus (p = 0.59, odds ratio = 1.016). Types of complication, post-operative hearing gain and revision rates were similar in both patient groups. Surgical outcomes are not significantly different for same-day and bilateral cartilage tympanoplasty, but same-day surgery has the added benefit of a lower cost.

Satellite services system analysis study. Volume 5: Programmatics

NASA Technical Reports Server (NTRS)

1981-01-01

The overall program and resources needed for development and operation of a Satellite Services System is reviewed. Program requirements covered system operations through 1993 and were completed in preliminary form. Program requirements were refined based on equipment preliminary design and analysis. Schedules, costs, equipment utilization, and facility/advanced technology requirements were included in the update. Equipment user charges were developed for each piece of equipment and for representative satellite servicing missions.

Re-Assessing Green Building Performance: A Post Occupancy Evaluation of 22 GSA Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fowler, Kimberly M.; Rauch, Emily M.; Henderson, Jordan W.

2010-06-01

2nd report on the performance of GSA's sustainably designed buildings. The purpose of this study was to provide an overview of measured whole building performance as it compares to GSA and industry baselines. The PNNL research team found the data analysis illuminated strengths and weaknesses of individual buildings as well as the portfolio of buildings. This section includes summary data, observations that cross multiple performance metrics, discussion of lessons learned from this research, and opportunities for future research. The summary of annual data for each of the performance metrics is provided in Table 25. The data represent 1 year ofmore » measurements and are not associated with any specific design features or strategies. Where available, multiple years of data were examined and there were minimal significant differences between the years. Individually focused post occupancy evaluation (POEs) would allow for more detailed analysis of the buildings. Examining building performance over multiple years could potentially offer a useful diagnostic tool for identifying building operations that are in need of operational changes. Investigating what the connection is between the building performance and the design intent would offer potential design guidance and possible insight into building operation strategies. The 'aggregate operating cost' metric used in this study represents the costs that were available for developing a comparative industry baseline for office buildings. The costs include water utilities, energy utilities, general maintenance, grounds maintenance, waste and recycling, and janitorial costs. Three of the buildings that cost more than the baseline in Figure 45 have higher maintenance costs than the baseline, and one has higher energy costs. Given the volume of data collected and analyzed for this study, the inevitable request is for a simple answer with respect to sustainably designed building performance. As previously stated, compiling the individual building values into single metrics is not statistically valid given the small number of buildings, but it has been done to provide a cursory view of this portfolio of sustainably designed buildings. For all metrics except recycling cost per rentable square foot and CBE survey response rate, the averaged building performance was better than the baseline for the GSA buildings in this study.« less

Preliminary Findings of the South Africa Power System Capacity Expansion and Operational Modelling Study: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reber, Timothy J; Chartan, Erol Kevin; Brinkman, Gregory L

Wind and solar power contract prices have recently become cheaper than many conventional new-build alternatives in South Africa and trends suggest a continued increase in the share of variable renewable energy (vRE) on South Africa's power system with coal technology seeing the greatest reduction in capacity, see 'Figure 6: Percentage share by Installed Capacity (MW)' in [1]. Hence it is essential to perform a state-of-the-art grid integration study examining the effects of these high penetrations of vRE on South Africa's power system. Under the 21st Century Power Partnership (21CPP), funded by the U.S. Department of Energy, the National Renewable Energymore » Laboratory (NREL) has significantly augmented existing models of the South African power system to investigate future vRE scenarios. NREL, in collaboration with Eskom's Planning Department, further developed, tested and ran a combined capacity expansion and operational model of the South African power system including spatially disaggregated detail and geographical representation of system resources. New software to visualize and interpret modelling outputs has been developed, and scenario analysis of stepwise vRE build targets reveals new insight into associated planning and operational impacts and costs. The model, built using PLEXOS, is split into two components, firstly a capacity expansion model and secondly a unit commitment and economic dispatch model. The capacity expansion model optimizes new generation decisions to achieve the lowest cost, with a full understanding of capital cost and an approximated understanding of operational costs. The operational model has a greater set of detailed operational constraints and is run at daily resolutions. Both are run from 2017 through 2050. This investigation suggests that running both models in tandem may be the most effective means to plan the least cost South African power system as build plans seen to be more expensive than optimal by the capacity expansion model can produce greater operational cost savings seen only in the operational model.« less

Water and Climate Impacts on Power System Operations: The Importance of Cooling Systems and Demand Response Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macknick, Jordan; Zhou, Ella; O'Connell, Matthew

The U.S. electricity sector is highly dependent upon water resources; changes in water temperatures and water availability can affect operational costs and the reliability of power systems. Despite the importance of water for power system operations, the effects of changes in water characteristics on multiple generators in a system are generally not modeled. Moreover, demand response measures, which can change the magnitude and timing of loads and can have beneficial impacts on power system operations, have not yet been evaluated in the context of water-related power vulnerabilities. This effort provides a first comprehensive vulnerability and cost analysis of water-related impactsmore » on a modeled power system and the potential for demand response measures to address vulnerability and cost concerns. This study uniquely combines outputs and inputs of a water and power plant system model, production cost, model, and relative capacity value model to look at variations in cooling systems, policy-related thermal curtailments, and demand response measures to characterize costs and vulnerability for a test system. Twenty-five scenarios over the course of one year are considered: a baseline scenario as well as a suite of scenarios to evaluate six cooling system combinations, the inclusion or exclusion of policy-related thermal curtailments, and the inclusion or exclusion of demand response measures. A water and power plant system model is utilized to identify changes in power plant efficiencies resulting from ambient conditions, a production cost model operating at an hourly scale is used to calculate generation technology dispatch and costs, and a relative capacity value model is used to evaluate expected loss of carrying capacity for the test system.« less

NECAP: NASA's Energy-Cost Analysis Program. Part 1: User's manual

NASA Technical Reports Server (NTRS)

Henninger, R. H. (Editor)

1975-01-01

The NECAP is a sophisticated building design and energy analysis tool which has embodied within it all of the latest ASHRAE state-of-the-art techniques for performing thermal load calculation and energy usage predictions. It is a set of six individual computer programs which include: response factor program, data verification program, thermal load analysis program, variable temperature program, system and equipment simulation program, and owning and operating cost program. Each segment of NECAP is described, and instructions are set forth for preparing the required input data and for interpreting the resulting reports.

Air Force Reusable Booster System: A Quick-look, Design Focused Modeling and Cost Analysis Study

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2011-01-01

This paper presents a method and an initial analysis of the costs of a reusable booster system (RBS) as envisioned by the US Department of Defense (DoD) and numerous initiatives that form the concept of Operationally Responsive Space (ORS). This paper leverages the knowledge gained from decades of experience with the semi-reusable NASA Space Shuttle to understand how the costs of a military next generation semi-reusable space transport might behave in the real world - and how it might be made as affordable as desired. The NASA Space Shuttle had a semi-expendable booster, that being the reusable Solid Rocket MotorslBoosters (SRMlSRB) and the expendable cryogenic External Tank (ET), with a reusable cargo and crew capable orbiter. This paper will explore DoD concepts that invert this architectural arrangement, using a reusable booster plane that flies back to base soon after launch, with the in-space elements of the launch system being the expendable portions. Cost estimating in the earliest stages of any potential, large scale program has limited usefulness. As a result, the emphasis here is on developing an approach, a structure, and the basic concepts that could continue to be matured as the program gains knowledge. Where cost estimates are provided, these results by necessity carry many caveats and assumptions, and this analysis becomes more about ways in which drivers of costs for diverse scenarios can be better understood. The paper is informed throughout with a design-for-cost philosophy whereby the design and technology features of the proposed RBS (who and what, the "architecture") are taken as linked at the hip to a desire to perform a certain mission (where and when), and together these inform the cost, responsiveness, performance and sustainability (how) of the system. Concepts for developing, acquiring, producing or operating the system will be shown for their inextricable relationship to the "architecture" of the system, and how these too relate to costs. Design and technology features bear special relevance to early program research and development directions. Given the uncertainties involved in both their actual performance promise and their relation to costs of operational systems, this later relationship is also given special attention.

Post-treatment of molasses wastewater by electrocoagulation and process optimization through response surface analysis.

PubMed

Tsioptsias, C; Petridis, D; Athanasakis, N; Lemonidis, I; Deligiannis, A; Samaras, P

2015-12-01

Molasses wastewater is a high strength effluent of food industry such as distilleries, sugar and yeast production plants etc. It is characterized by a dark brown color and exhibits a high content in substances of recalcitrant nature such as melanoidins. In this study, electrocoagulation (EC) was studied as a post treatment step for biologically treated molasses wastewater with high nitrogen content obtained from a baker's yeast industry. Iron and copper electrodes were used in various forms; the influence and interaction of current density, molasses wastewater dilution, and reaction time, on COD, color, ammonium and nitrate removal rates and operating cost were studied and optimized through Box Behnken's response surface analysis. Reaction time varied from 0.5 to 4 h, current density varied from 5 to 40 mA/cm(2) and dilution from 0 to 90% (v/v expressed as water concentration). pH, conductivity and temperature measurements were also carried out during each experiment. From preliminary experiments, it was concluded that the application of aeration and sample dilution, considerably influenced the kinetics of the process. The obtained results showed that COD removal varied between 10 and 54%, corresponding to an operation cost ranging from 0.2 to 33 euro/kg COD removed. Significant removal rates were obtained for nitrogen as nitrate and ammonium (i.e. 70% ammonium removal). A linear relation of COD and ammonium to the design parameters was observed, while operation cost and nitrate removal responded in a curvilinear function. A low ratio of electrode surface to treated volume was used, associated to a low investment cost; in addition, iron wastes could be utilized as low cost electrodes i.e. iron fillings from lathes, aiming to a low operation cost due to electrodes replacement. In general, electrocoagulation proved to be an effective and low cost process for biologically treated molasses-wastewater treatment for additional removal of COD and nitrogen content and color reduction. Treated effluent samples with good quality were produced by EC, with COD, NH4-N and NO3-N concentrations of 180, 52 and 2 mg/l respectively. Response surface analysis revealed that optimized conditions could be established under moderate molasses wastewater dilution, (e.g. 45%), at 3.5 h treatment time and 33 mA/cm(2) current density. Copyright © 2015 Elsevier Ltd. All rights reserved.

A systematic review and cost analysis of robot-assisted hysterectomy in malignant and benign conditions.

PubMed

Tapper, Anna-Maija; Hannola, Mikko; Zeitlin, Rainer; Isojärvi, Jaana; Sintonen, Harri; Ikonen, Tuija S

2014-06-01

In order to assess the effectiveness and costs of robot-assisted hysterectomy compared with conventional techniques we reviewed the literature separately for benign and malignant conditions, and conducted a cost analysis for different techniques of hysterectomy from a hospital economic database. Unlimited systematic literature search of Medline, Cochrane and CRD databases produced only two randomized trials, both for benign conditions. For the outcome assessment, data from two HTA reports, one systematic review, and 16 original articles were extracted and analyzed. Furthermore, one cost modelling and 13 original cost studies were analyzed. In malignant conditions, less blood loss, fewer complications and a shorter hospital stay were considered as the main advantages of robot-assisted surgery, like any mini-invasive technique when compared to open surgery. There were no significant differences between the techniques regarding oncological outcomes. When compared to laparoscopic hysterectomy, the main benefit of robot-assistance was a shorter learning curve associated with fewer conversions but the length of robotic operation was often longer. In benign conditions, no clinically significant differences were reported and vaginal hysterectomy was considered the optimal choice when feasible. According to Finnish data, the costs of robot-assisted hysterectomies were 1.5-3 times higher than the costs of conventional techniques. In benign conditions the difference in cost was highest. Because of expensive disposable supplies, unit costs were high regardless of the annual number of robotic operations. Hence, in the current distribution of cost pattern, economical effectiveness cannot be markedly improved by increasing the volume of robotic surgery. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Advanced transportation system studies technical area 2 (TA-2): Heavy lift launch vehicle development. volume 3; Program Cost estimates

NASA Technical Reports Server (NTRS)

McCurry, J. B.

1995-01-01

The purpose of the TA-2 contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. The basic period of performance of the TA-2 contract was from May 1992 through May 1993. No-cost extensions were exercised on the contract from June 1993 through July 1995. This document is part of the final report for the TA-2 contract. The final report consists of three volumes: Volume 1 is the Executive Summary, Volume 2 is Technical Results, and Volume 3 is Program Cost Estimates. The document-at-hand, Volume 3, provides a work breakdown structure dictionary, user's guide for the parametric life cycle cost estimation tool, and final report developed by ECON, Inc., under subcontract to Lockheed Martin on TA-2 for the analysis of heavy lift launch vehicle concepts.

Reducing robotic prostatectomy costs by minimizing instrumentation.

PubMed

Delto, Joan C; Wayne, George; Yanes, Rafael; Nieder, Alan M; Bhandari, Akshay

2015-05-01

Since the introduction of robotic surgery for radical prostatectomy, the cost-benefit of this technology has been under scrutiny. While robotic surgery professes to offer multiple advantages, including reduced blood loss, reduced length of stay, and expedient recovery, the associated costs tend to be significantly higher, secondary to the fixed cost of the robot as well as the variable costs associated with instrumentation. This study provides a simple framework for the careful consideration of costs during the selection of equipment and materials. Two experienced robotic surgeons at our institution as well as several at other institutions were queried about their preferred instrument usage for robot-assisted prostatectomy. Costs of instruments and materials were obtained and clustered by type and price. A minimal set of instruments was identified and compared against alternative instrumentation. A retrospective review of 125 patients who underwent robotically assisted laparoscopic prostatectomy for prostate cancer at our institution was performed to compare estimated blood loss (EBL), operative times, and intraoperative complications for both surgeons. Our surgeons now conceptualize instrument costs as proportional changes to the cost of the baseline minimal combination. Robotic costs at our institution were reduced by eliminating an energy source like the Ligasure or vessel sealer, exploiting instrument versatility, and utilizing inexpensive tools such as Hem-o-lok clips. Such modifications reduced surgeon 1's cost of instrumentation to ∼40% less compared with surgeon 2 and up to 32% less than instrumentation used by surgeons at other institutions. Surgeon 1's combination may not be optimal for all robotic surgeons; however, it establishes a minimally viable toolbox for our institution through a rudimentary cost analysis. A similar analysis may aid others in better conceptualizing long-term costs not as nominal, often unwieldy prices, but as percent changes in spending. With regard to intraoperative outcomes, the use of a minimally viable toolbox did not result in increased EBL, operative time, or intraoperative complications. Simple changes to surgeon preference and creative utilization of instruments can eliminate 40% of costs incurred on robotic instruments alone. Moreover, EBL, operative times, and intraoperative complications are not compromised as a result of cost reduction. Our process of identifying such improvements is straightforward and may be replicated by other robotic surgeons. Further prospective multicenter trials should be initiated to assess other methods of cost reduction.

The cost analysis of cemented versus cementless total hip replacement operations on the NHS.

PubMed

Kallala, R; Anderson, P; Morris, S; Haddad, F S

2013-07-01

In a time of limited resources, the debate continues over which types of hip prosthesis are clinically superior and more cost-effective. Orthopaedic surgeons increasingly need robust economic evidence to understand the full value of the operation, and to aid decision making on the 'package' of procedures that are available and to justify their practice beyond traditional clinical preference. In this paper we explore the current economic debate about the merits of cemented and cementless total hip replacement, an issue that continues to divide the orthopaedic community.

An Analysis of the Factors Generating the Variance Between the Budgeted and Actual Operating Results of the Naval Aviation Depot at North Island, California

DTIC Science & Technology

2008-06-01

management structure employs free- market system principles and encourages business-like processes that are mission driven. Since no operating funds are...variable (Potvin, 2007). 2. Unit Cost Goal NWCFs use the unit cost goal ( UCG ) for planning purposes. The UCG is an estimate of what a unit of product...mission 6. Will not interfere with depot performance This section opens the depot to the private market . 53 Chapter 159 – Real Property

Cost & efficiency evaluation of a publicly financed & publicly delivered referral transport service model in three districts of Haryana State, India.

PubMed

Prinja, Shankar; Manchanda, Neha; Aggarwal, Arun Kumar; Kaur, Manmeet; Jeet, Gursimer; Kumar, Rajesh

2013-12-01

Various models of referral transport services have been introduced in different States in India with an aim to reduce maternal and infant mortality. Most of the research on referral transport has focussed on coverage, quality and timeliness of the service with not much information on cost and efficiency. This study was undertaken to analyze the cost of a publicly financed and managed referral transport service model in three districts of Haryana State, and to assess its cost and technical efficiency. Data on all resources spent for delivering referral transport service, during 2010, were collected from three districts of Haryana State. Costs incurred at State level were apportioned using appropriate methods. Data Envelopment Analysis (DEA) technique was used to assess the technical efficiency of ambulances. To estimate the efficient scale of operation for ambulance service, the average cost was regressed on kilometres travelled for each ambulance station using a quadratic regression equation. The cost of referral transport per year varied from [symbol: see text] 5.2 million in Narnaul to [symbol: see text] 9.8 million in Ambala. Salaries (36-50%) constituted the major cost. Referral transport was found to be operating at an average efficiency level of 76.8 per cent. Operating an ambulance with a patient load of 137 per month was found to reduce unit costs from an average [symbol: see text] 15.5 per km to [symbol: see text] 9.57 per km. Our results showed that the publicly delivered referral transport services in Haryana were operating at an efficient level. Increasing the demand for referral transport services among the target population represents an opportunity for further improving the efficiency of the underutilized ambulances.

Cost & efficiency evaluation of a publicly financed & publicly delivered referral transport service model in three districts of Haryana State, India

PubMed Central

Prinja, Shankar; Manchanda, Neha; Aggarwal, Arun Kumar; Kaur, Manmeet; Jeet, Gursimer; Kumar, Rajesh

2013-01-01

Background & objectives: Various models of referral transport services have been introduced in different States in India with an aim to reduce maternal and infant mortality. Most of the research on referral transport has focussed on coverage, quality and timeliness of the service with not much information on cost and efficiency. This study was undertaken to analyze the cost of a publicly financed and managed referral transport service model in three districts of Haryana State, and to assess its cost and technical efficiency. Methods: Data on all resources spent for delivering referral transport service, during 2010, were collected from three districts of Haryana State. Costs incurred at State level were apportioned using appropriate methods. Data Envelopment Analysis (DEA) technique was used to assess the technical efficiency of ambulances. To estimate the efficient scale of operation for ambulance service, the average cost was regressed on kilometres travelled for each ambulance station using a quadratic regression equation. Results: The cost of referral transport per year varied from ₹5.2 million in Narnaul to ₹9.8 million in Ambala. Salaries (36-50%) constituted the major cost. Referral transport was found to be operating at an average efficiency level of 76.8 per cent. Operating an ambulance with a patient load of 137 per month was found to reduce unit costs from an average ₹ 15.5 per km to ₹ 9.57 per km. Interpretation & conclusions: Our results showed that the publicly delivered referral transport services in Haryana were operating at an efficient level. Increasing the demand for referral transport services among the target population represents an opportunity for further improving the efficiency of the underutilized ambulances. PMID:24521648

Risk Analysis for Unintentional Slide Deployment During Airline Operations.

PubMed

Ayra, Eduardo S; Insua, David Ríos; Castellanos, María Eugenia; Larbi, Lydia

2015-09-01

We present a risk analysis undertaken to mitigate problems in relation to the unintended deployment of slides under normal operations within a commercial airline. This type of incident entails relevant costs for the airline industry. After assessing the likelihood and severity of its consequences, we conclude that such risks need to be managed. We then evaluate the effectiveness of various countermeasures, describing and justifying the chosen ones. We also discuss several issues faced when implementing and communicating the proposed measures, thus fully illustrating the risk analysis process. © 2015 Society for Risk Analysis.

An 8-year follow-up study of 221 consecutive hip fracture patients in Finland: analysis of reoperations and their direct medical costs.

PubMed

Lüthje, P; Helkamaa, T; Nurmi-Lüthje, I; Kaukonen, J-P; Kataja, M

2014-03-01

Some hip fracture patients need one or more reoperations because of complications following initial operative treatment. The aim of this study was to identify all further surgical interventions in a cohort of patients with hip fractures over a period of 8 years after index fracture. Immediate direct costs of these reoperations were also calculated. This retrospective study investigated 221 consecutive patients with hip fractures operated on at two different hospitals in southeastern Finland. The study period in hospital A was from 1 February 2003 to 31 January 2004, and in hospital B from 1 February 2003 to 30 April 2004. About 50% were femoral neck fractures, 41% trochanteric fractures, and 9% subtrochanteric fractures. Patients' medical records were checked from the hospital records and confirmed manually. Short- and long-term complications were recorded. Survival analysis was performed using a life-table method. The actual costs for reoperations and other further procedures for each patient were calculated using diagnosis-related groups-based costs for both hospitals in 2012. A total of 20 patients (9%) needed reoperations. Overall, 10 patients (8.9%) with a femoral neck fracture (n = 112), 8 patients (8.7%) with trochanteric fracture (n = 92), and 2 patients (10.5%) with subtrochanteric fracture (n = 19) were reoperated on. The median interval between the primary operation of the acute hip fracture (n = 20) and the first reoperation was about 300 days (range: 2 weeks to 82 months). Among the women reoperated on, the excess mortality was lower than among those undergoing a single operation. The median costs of treatment per patient with one or more reoperations were €13,422 in hospital A (range: €1616-€61,755), €11,076 in hospital B (range: €1540-€17,866), and €12,850 in the total study group (p = 0.43). In the case of infections (3 patients), the mean costs per patient were €28,751 (range: €11,076-€61,755). Almost 10% of hip fracture patients required reoperations, and these reoperations caused significant direct costs to health care. However, direct costs account for only approximately 25% of the first year's total costs. These costs should be taken into account when evaluating the economics of hip fractures and the burden of health care.

Design study of wind turbines 50 kW to 3000 kW for electric utility applications. Volume 2: Analysis and design

NASA Technical Reports Server (NTRS)

1976-01-01

All possible overall system configurations, operating modes, and subsystem concepts for a wind turbine configuration for cost effective generation of electrical power were evaluated for both technical feasibility and compatibility with utility networks, as well as for economic attractiveness. A design optimization computer code was developed to determine the cost sensitivity of the various design features, and thus establish the configuration and design conditions that would minimize the generated energy costs. The preliminary designs of both a 500 kW unit and a 1500 kW unit operating in a 12 mph and 18 mph median wind speed respectively, were developed. The various design features and components evaluated are described, and the rationale employed to select the final design configuration is given. All pertinent technical performance data and component cost data is included. The costs of all major subassemblies are estimated and the resultant energy costs for both the 500 kW and 1500 kW units are calculated.

Life-cycle cost as basis to optimize waste collection in space and time: A methodology for obtaining a detailed cost breakdown structure.

PubMed

Sousa, Vitor; Dias-Ferreira, Celia; Vaz, João M; Meireles, Inês

2018-05-01

Extensive research has been carried out on waste collection costs mainly to differentiate costs of distinct waste streams and spatial optimization of waste collection services (e.g. routes, number, and location of waste facilities). However, waste collection managers also face the challenge of optimizing assets in time, for instance deciding when to replace and how to maintain, or which technological solution to adopt. These issues require a more detailed knowledge about the waste collection services' cost breakdown structure. The present research adjusts the methodology for buildings' life-cycle cost (LCC) analysis, detailed in the ISO 15686-5:2008, to the waste collection assets. The proposed methodology is then applied to the waste collection assets owned and operated by a real municipality in Portugal (Cascais Ambiente - EMAC). The goal is to highlight the potential of the LCC tool in providing a baseline for time optimization of the waste collection service and assets, namely assisting on decisions regarding equipment operation and replacement.

Evaluation of low-cost commercial-off-the-shelf autopilot systems for SUAS operations

NASA Astrophysics Data System (ADS)

Brown, Calvin Thomas

With this increase in unmanned aircraft system (UAS) operations, there is a need for a structured process to evaluate different commercially available systems, particularly autopilots. The Remotely Operated Aircraft Management, Interpretation, and Navigation from Ground or ROAMING scale was developed to meet this need. This scale is a modification of the widely accepted Handling Qualities Rating scale developed by George Cooper and Robert Harper Jr. The Cooper-Harper scale allows pilots to rate a vehicle's performance in completing some task. Similarly, the ROAMING scale allows UAS operators to evaluate the management and observability of UAS in completing some task. The standardized evaluative process consists of cost, size, weight, and power (SWAP) analysis, ease of implementation through procedural description of setup, ROAMING scale rating, a slightly modified NASA TLX rating, and comparison of manual operation to autonomous operation of the task. This standard for evaluation of autopilots and their software will lead to better understanding of the workload placed on UAS operators and indicate where improvements to design and operational procedures can be made. An assortment of low-cost commercial-off-the-shelf (COTS) autopilots were selected for use in the development of the evaluation and results of these tests demonstrate the commonalities and differences in these systems.

Documentation of the analysis of the benefits and costs of aeronautical research and technology models, volume 1

NASA Technical Reports Server (NTRS)

Bobick, J. C.; Braun, R. L.; Denny, R. E.

1979-01-01

The analysis of the benefits and costs of aeronautical research and technology (ABC-ART) models are documented. These models were developed by NASA for use in analyzing the economic feasibility of applying advanced aeronautical technology to future civil aircraft. The methodology is composed of three major modules: fleet accounting module, airframe manufacturing module, and air carrier module. The fleet accounting module is used to estimate the number of new aircraft required as a function of time to meet demand. This estimation is based primarily upon the expected retirement age of existing aircraft and the expected change in revenue passenger miles demanded. Fuel consumption estimates are also generated by this module. The airframe manufacturer module is used to analyze the feasibility of the manufacturing the new aircraft demanded. The module includes logic for production scheduling and estimating manufacturing costs. For a series of aircraft selling prices, a cash flow analysis is performed and a rate of return on investment is calculated. The air carrier module provides a tool for analyzing the financial feasibility of an airline purchasing and operating the new aircraft. This module includes a methodology for computing the air carrier direct and indirect operating costs, performing a cash flow analysis, and estimating the internal rate of return on investment for a set of aircraft purchase prices.

Logistics cost analysis of rice residues for second generation bioenergy production in Ghana.

PubMed

Vijay Ramamurthi, Pooja; Cristina Fernandes, Maria; Sieverts Nielsen, Per; Pedro Nunes, Clemente

2014-12-01

This study explores the techno-economic potential of rice residues as a bioenergy resource to meet Ghana's energy demands. Major rice growing regions of Ghana have 70-90% of residues available for bioenergy production. To ensure cost-effective biomass logistics, a thorough cost analysis was made for two bioenergy routes. Logistics costs for a 5 MWe straw combustion plant were 39.01, 47.52 and 47.89 USD/t for Northern, Ashanti and Volta regions respectively. Logistics cost for a 0.25 MWe husk gasification plant (with roundtrip distance 10 km) was 2.64 USD/t in all regions. Capital cost (66-72%) contributes significantly to total logistics costs of straw, however for husk logistics, staff (40%) and operation and maintenance costs (46%) dominate. Baling is the major processing logistic cost for straw, contributing to 46-48% of total costs. Scale of straw unit does not have a large impact on logistic costs. Transport distance of husks has considerable impact on logistic costs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Organizational Constraints and Goal Setting

ERIC Educational Resources Information Center

Putney, Frederick B.; Wotman, Stephen

1978-01-01

Management modeling techniques are applied to setting operational and capital goals using cost analysis techniques in this case study at the Columbia University School of Dental and Oral Surgery. The model was created as a planning tool used in developing a financially feasible operating plan and a 100 percent physical renewal plan. (LBH)

An Inventory and Use Analysis of Information Systems on Small Farms in Pennsylvania

ERIC Educational Resources Information Center

Adams, Jean S.

2007-01-01

Across the United States, today's farm operators face continuing challenges from global competition, increasing production costs, changing technology, increased regulations, scarce resources, and lower profit margins. To face these challenges, farm operators need to gather and utilize information allowing them to make informed decisions. Several…

Qualitative Comparison of Streamflow Information Programs of the U.S. Geological Survey and Three Non-Federal Agencies

USGS Publications Warehouse

Norris, J. Michael; Lewis, Michael; Dorsey, Michael; Kimbrough, Robert; Holmes, Robert R.; Staubitz, Ward

2008-01-01

A qualitative comparison was made of the streamgaging programs of the U.S. Geological Survey (USGS) and three non-Federal agencies in terms of approximate costs and streamflow-information products produced. The three non-Federal agencies provided the USGS with detailed information on their streamgaging program and related costs, and the USGS explored, through publicly available Web sites and one-on-one discussions, the comparability of the streamflow information produced. The type and purpose of streamgages operated, the quality of streamflow record produced, and cost-accounting methods have a great effect on streamgaging costs. There are many uses of streamflow information, and the information requirements for streamgaging programs differ greatly across this range of purposes. A premise of the USGS streamgaging program is that the network must produce consistent data of sufficient quality to support the broadest range of possible uses. Other networks may have a narrower range of purposes; as a consequence, the method of operation, data-quality objectives, and information delivery may be different from those for a multipurpose network. As a result, direct comparison of the overall cost (or of the cost per streamgage) among these programs is not possible. The analysis is, nonetheless, very instructive and provides USGS program managers, agency leadership, and other agency streamgaging program managers useful insight to influence future decisions. Even though the comparison of streamgaging costs and streamflow information products was qualitative, this analysis does offer useful insights on longstanding questions of USGS streamgaging costs.

Production cost of a real microalgae production plant and strategies to reduce it.

PubMed

Acién, F G; Fernández, J M; Magán, J J; Molina, E

2012-01-01

The cost analysis of a real facility for the production of high value microalgae biomass is presented. The facility is based on ten 3 m3 tubular photobioreactors operated in continuous mode for 2 years, data of Scenedesmus almeriensis productivity but also of nutrients and power consumption from this facility being used. The yield of the facility was close to maximum expected for the location of Almería, the annual production capacity being 3.8 t/year (90 t/ha·year) and the photosynthetic efficiency being 3.6%. The production cost was 69 €/kg. Economic analysis shows that labor and depreciation are the major factors contributing to this cost. Simplification of the technology and scale-up to a production capacity of 200 t/year allows to reduce the production cost up to 12.6 €/kg. Moreover, to reduce the microalgae production cost to approaches the energy or commodities markets it is necessary to reduce the photobioreactor cost (by simplifying its design or materials used), use waste water and flue gases, and reduce the power consumption and labor required for the production step. It can be concluded that although it has been reported that production of biofuels from microalgae is relatively close to being economically feasible, data here reported demonstrated that to achieve it by using the current production technologies, it is necessary to substantially reduce their costs and to operate them near their optimum values. Copyright © 2012 Elsevier Inc. All rights reserved.

Analysis of Life-Cycle Costs and Market Applications of Flywheel Energy-Storage Transit Vehicles

DOT National Transportation Integrated Search

1979-07-01

The Urban Mass Transportation Administration (UMTA) has recently completed the Phase I activities of its Flywheel Energy Storage Program involving an analysis of the operational requirements and the conceptual design of flywheel energy storage vehicl...

Airport landside operations and air service

NASA Astrophysics Data System (ADS)

Mandle, P. B.; Whitlock, E. M.; Lamagna, F.; Mundy, R. A.; Oberhausen, P. J.

The following areas are discussed: airport curbside planning and design; analysis of New Orleans airport ground transportation system; time series analysis of intercity air travel volume; economic justification of air service to small communities; and general aviation and the airport and airway system (an analysis of cost allocation and recovery).

Groundwater contamination from waste management sites: The interaction between risk-based engineering design and regulatory policy: 1. Methodology

NASA Astrophysics Data System (ADS)

Massmann, Joel; Freeze, R. Allan

1987-02-01

This paper puts in place a risk-cost-benefit analysis for waste management facilities that explicitly recognizes the adversarial relationship that exists in a regulated market economy between the owner/operator of a waste management facility and the government regulatory agency under whose terms the facility must be licensed. The risk-cost-benefit analysis is set up from the perspective of the owner/operator. It can be used directly by the owner/operator to assess alternative design strategies. It can also be used by the regulatory agency to assess alternative regulatory policy, but only in an indirect manner, by examining the response of an owner/operator to the stimuli of various policies. The objective function is couched in terms of a discounted stream of benefits, costs, and risks over an engineering time horizon. Benefits are in the form of revenues for services provided; costs are those of construction and operation of the facility. Risk is defined as the cost associated with the probability of failure, with failure defined as the occurrence of a groundwater contamination event that violates the licensing requirements established for the facility. Failure requires a breach of the containment structure and contaminant migration through the hydrogeological environment to a compliance surface. The probability of failure can be estimated on the basis of reliability theory for the breach of containment and with a Monte-Carlo finite-element simulation for the advective contaminant transport. In the hydrogeological environment the hydraulic conductivity values are defined stochastically. The probability of failure is reduced by the presence of a monitoring network operated by the owner/operator and located between the source and the regulatory compliance surface. The level of reduction in the probability of failure depends on the probability of detection of the monitoring network, which can be calculated from the stochastic contaminant transport simulations. While the framework is quite general, the development in this paper is specifically suited for a landfill in which the primary design feature is one or more synthetic liners in parallel. Contamination is brought about by the release of a single, inorganic nonradioactive species into a saturated, high-permeability, advective, steady state horizontal flow system which can be analyzed with a two-dimensional analysis. It is possible to carry out sensitivity analyses for a wide variety of influences on this system, including landfill size, liner design, hydrogeological parameters, amount of exploration, extent of monitoring network, nature of remedial schemes, economic factors, and regulatory policy.

A retrospective comparison of robotic cholecystectomy versus laparoscopic cholecystectomy: operative outcomes and cost analysis.

PubMed

Strosberg, David S; Nguyen, Michelle C; Muscarella, Peter; Narula, Vimal K

2017-03-01

Robotic-assisted surgery is gaining popularity in general surgery. Our objective was to evaluate and compare operative outcomes and total costs for robotic cholecystectomy (RC) and laparoscopic cholecystectomy (LC). A retrospective review was performed for all patients who underwent single-procedure RC and LC from January 2011 to July 2015 by a single surgeon at a large academic medical center. Demographics, diagnosis, perioperative variables, postoperative complications, 30-day readmissions, and operative and hospital costs were collected and analyzed between those patient groups. A total of 237 patients underwent RC or LC, and comprised the study population. Ninety-seven patients (40.9 %) underwent LC, and 140 patients (50.1 %) underwent RC. Patients who underwent RC had a higher body mass index (p = 0.03), lower rates of coronary artery disease (p < 0.01), and higher rates of chronic cholecystitis (p < 0.01). There were lower rates of intraoperative cholangiography (p < 0.01) and conversion to an open procedure (p < 0.01), however longer operative times (p < 0.01) for patients in the RC group. There were no bile duct injuries in either group, no difference in bile leak rates (p = 0.65), or need for reoperation (p = 1.000). Cost analysis of outpatient-only procedures, excluding cases with conversion to open or use of intraoperative cholangiography, demonstrated higher total charges (p < 0.01) and cost (p < 0.01) and lower revenue (p < 0.01) for RC compared to LC, with no difference in total payments (p = 0.34). Robotic cholecystectomy appears to be safe although costlier in comparison with laparoscopic cholecystectomy. Further studies are needed to understand the long-term implications of robotic technology, the cost to the health care system, and its role in minimally invasive surgery.

Feasibility study of modern airships, phase 1. Volume 3: Historical overview (task 1)

NASA Technical Reports Server (NTRS)

Faurote, G. L.

1975-01-01

The history of lighter-than-air vehicles is reviewed in terms of providing a background for the mission analysis and parametric analysis tasks. Data from past airships and airship operations are presented in the following areas: (1) parameterization of design characteristics; (2) markets, missions, costs, and operating procedures, (3) indices of efficiency for comparison; (4) identification of critical design and operational characteristics; and (5) definition of the 1930 state-of-the-art and the 1974 state-of-the-art from a technical and economic standpoint.

Navy Multiband Terminal (NMT)

DTIC Science & Technology

2015-12-01

AEHF satellites and MILSTAR satellites in the backwards-compatible mode. Mission requirements specific to Navy operations, including threat levels and...Center for Cost Analysis (NCCA) Component Cost Position (CCP) memo dated December 18, 2015 Confidence Level Confidence Level of cost estimate for... Econ Qty Sch Eng Est Oth Spt Total 6.970 0.082 0.637 0.034 0.000 -1.210 0.000 -0.418 -0.875 6.095 Current SAR Baseline to Current Estimate (TY $M) PAUC

Development of advanced high temperature in-cylinder components and tribological systems for low heat rejection diesel engines, phase 1

NASA Astrophysics Data System (ADS)

Kroeger, C. A.; Larson, H. J.

1992-03-01

Analysis and concept design work completed in Phase 1 have identified a low heat rejection engine configuration with the potential to meet the Heavy Duty Transport Technology program specific fuel consumption goal of 152 g/kW-hr. The proposed engine configuration incorporates low heat rejection, in-cylinder components designed for operation at 24 MPa peak cylinder pressure. Water cooling is eliminated by selective oil cooling of the components. A high temperature lubricant will be required due to increased in-cylinder operating temperatures. A two-stage turbocharger air system with intercooling and aftercooling was selected to meet engine boost and BMEP requirements. A turbocompound turbine stage is incorporated for exhaust energy recovery. The concept engine cost was estimated to be 43 percent higher compared to a Caterpillar 3176 engine. The higher initial engine cost is predicted to be offset by reduced operating costs due the lower fuel consumption.

Development of advanced high temperature in-cylinder components and tribological systems for low heat rejection diesel engines, phase 1

NASA Technical Reports Server (NTRS)

Kroeger, C. A.; Larson, H. J.

1992-01-01

Analysis and concept design work completed in Phase 1 have identified a low heat rejection engine configuration with the potential to meet the Heavy Duty Transport Technology program specific fuel consumption goal of 152 g/kW-hr. The proposed engine configuration incorporates low heat rejection, in-cylinder components designed for operation at 24 MPa peak cylinder pressure. Water cooling is eliminated by selective oil cooling of the components. A high temperature lubricant will be required due to increased in-cylinder operating temperatures. A two-stage turbocharger air system with intercooling and aftercooling was selected to meet engine boost and BMEP requirements. A turbocompound turbine stage is incorporated for exhaust energy recovery. The concept engine cost was estimated to be 43 percent higher compared to a Caterpillar 3176 engine. The higher initial engine cost is predicted to be offset by reduced operating costs due the lower fuel consumption.

Cost effectiveness of stream-gaging program in Michigan

USGS Publications Warehouse

Holtschlag, D.J.

1985-01-01

This report documents the results of a study of the cost effectiveness of the stream-gaging program in Michigan. Data uses and funding sources were identified for the 129 continuous gaging stations being operated in Michigan as of 1984. One gaging station was identified as having insufficient reason to continue its operation. Several stations were identified for reactivation, should funds become available, because of insufficiencies in the data network. Alternative methods of developing streamflow information based on routing and regression analyses were investigated for 10 stations. However, no station records were reproduced with sufficient accuracy to replace conventional gaging practices. A cost-effectiveness analysis of the data-collection procedure for the ice-free season was conducted using a Kalman-filter analysis. To define missing-record characteristics, cross-correlation coefficients and coefficients of variation were computed at stations on the basis of daily mean discharge. Discharge-measurement data were used to describe the gage/discharge rating stability at each station. The results of the cost-effectiveness analysis for a 9-month ice-free season show that the current policy of visiting most stations on a fixed servicing schedule once every 6 weeks results in an average standard error of 12.1 percent for the current $718,100 budget. By adopting a flexible servicing schedule, the average standard error could be reduced to 11.1 percent. Alternatively, the budget could be reduced to $700,200 while maintaining the current level of accuracy. A minimum budget of $680,200 is needed to operate the 129-gaging-station program; a budget less than this would not permit proper service and maintenance of stations. At the minimum budget, the average standard error would be 14.4 percent. A budget of $789,900 (the maximum analyzed) would result in a decrease in the average standard error to 9.07 percent. Owing to continual changes in the composition of the network and the changes in the uncertainties of streamflow accuracy at individual stations, the cost-effectiveness analysis will need to be updated regularly if it is to be used as a management tool. Cost of these updates need to be considered in decisions concerning the feasibility of flexible servicing schedules.

Launch Vehicle Production and Operations Cost Metrics

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Neeley, James R.; Blackburn, Ruby F.

2014-01-01

Traditionally, launch vehicle cost has been evaluated based on $/Kg to orbit. This metric is calculated based on assumptions not typically met by a specific mission. These assumptions include the specified orbit whether Low Earth Orbit (LEO), Geostationary Earth Orbit (GEO), or both. The metric also assumes the payload utilizes the full lift mass of the launch vehicle, which is rarely true even with secondary payloads.1,2,3 Other approaches for cost metrics have been evaluated including unit cost of the launch vehicle and an approach to consider the full program production and operations costs.4 Unit cost considers the variable cost of the vehicle and the definition of variable costs are discussed. The full program production and operation costs include both the variable costs and the manufacturing base. This metric also distinguishes operations costs from production costs, including pre-flight operational testing. Operations costs also consider the costs of flight operations, including control center operation and maintenance. Each of these 3 cost metrics show different sensitivities to various aspects of launch vehicle cost drivers. The comparison of these metrics provides the strengths and weaknesses of each yielding an assessment useful for cost metric selection for launch vehicle programs.

Cost/benefit analysis for video security systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-01-01

Dr. Don Hush and Scott Chapman, in conjunction with the Electrical and Computer Engineering Department of the University of New Mexico (UNM), have been contracted by Los Alamos National Laboratories to perform research in the area of high security video analysis. The first phase of this research, presented in this report, is a cost/benefit analysis of various approaches to the problem in question. This discussion begins with a description of three architectures that have been used as solutions to the problem of high security surveillance. An overview of the relative merits and weaknesses of each of the proposed systems ismore » included. These descriptions are followed directly by a discussion of the criteria chosen in evaluating the systems and the techniques used to perform the comparisons. The results are then given in graphical and tabular form, and their implications discussed. The project to this point has involved assessing hardware and software issues in image acquisition, processing and change detection. Future work is to leave these questions behind to consider the issues of change analysis - particularly the detection of human motion - and alarm decision criteria. The criteria for analysis in this report include: cost; speed; tradeoff issues in moving primative operations from software to hardware; real time operation considerations; change image resolution; and computational requirements.« less

A Near-Term, High-Confidence Heavy Lift Launch Vehicle

NASA Technical Reports Server (NTRS)

Rothschild, William J.; Talay, Theodore A.

2009-01-01

The use of well understood, legacy elements of the Space Shuttle system could yield a near-term, high-confidence Heavy Lift Launch Vehicle that offers significant performance, reliability, schedule, risk, cost, and work force transition benefits. A side-mount Shuttle-Derived Vehicle (SDV) concept has been defined that has major improvements over previous Shuttle-C concepts. This SDV is shown to carry crew plus large logistics payloads to the ISS, support an operationally efficient and cost effective program of lunar exploration, and offer the potential to support commercial launch operations. This paper provides the latest data and estimates on the configurations, performance, concept of operations, reliability and safety, development schedule, risks, costs, and work force transition opportunities for this optimized side-mount SDV concept. The results presented in this paper have been based on established models and fully validated analysis tools used by the Space Shuttle Program, and are consistent with similar analysis tools commonly used throughout the aerospace industry. While these results serve as a factual basis for comparisons with other launch system architectures, no such comparisons are presented in this paper. The authors welcome comparisons between this optimized SDV and other Heavy Lift Launch Vehicle concepts.

The cost of implementing inpatient bar code medication administration.

PubMed

Sakowski, Julie Ann; Ketchel, Alan

2013-02-01

To calculate the costs associated with implementing and operating an inpatient bar-code medication administration (BCMA) system in the community hospital setting and to estimate the cost per harmful error prevented. This is a retrospective, observational study. Costs were calculated from the hospital perspective and a cost-consequence analysis was performed to estimate the cost per preventable adverse drug event averted. Costs were collected from financial records and key informant interviews at 4 not-for profit community hospitals. Costs included direct expenditures on capital, infrastructure, additional personnel, and the opportunity costs of time for existing personnel working on the project. The number of adverse drug events prevented using BCMA was estimated by multiplying the number of doses administered using BCMA by the rate of harmful errors prevented by interventions in response to system warnings. Our previous work found that BCMA identified and intercepted medication errors in 1.1% of doses administered, 9% of which potentially could have resulted in lasting harm. The cost of implementing and operating BCMA including electronic pharmacy management and drug repackaging over 5 years is $40,000 (range: $35,600 to $54,600) per BCMA-enabled bed and $2000 (range: $1800 to $2600) per harmful error prevented. BCMA can be an effective and potentially cost-saving tool for preventing the harm and costs associated with medication errors.

Counting the costs of accreditation in acute care: an activity-based costing approach

PubMed Central

Mumford, Virginia; Greenfield, David; Hogden, Anne; Forde, Kevin; Westbrook, Johanna; Braithwaite, Jeffrey

2015-01-01

Objectives To assess the costs of hospital accreditation in Australia. Design Mixed methods design incorporating: stakeholder analysis; survey design and implementation; activity-based costs analysis; and expert panel review. Setting Acute care hospitals accredited by the Australian Council for Health Care Standards. Participants Six acute public hospitals across four States. Results Accreditation costs varied from 0.03% to 0.60% of total hospital operating costs per year, averaged across the 4-year accreditation cycle. Relatively higher costs were associated with the surveys years and with smaller facilities. At a national level these costs translate to $A36.83 million, equivalent to 0.1% of acute public hospital recurrent expenditure in the 2012 fiscal year. Conclusions This is the first time accreditation costs have been independently evaluated across a wide range of hospitals and highlights the additional cost burden for smaller facilities. A better understanding of the costs allows policymakers to assess alternative accreditation and other quality improvement strategies, and understand their impact across a range of facilities. This methodology can be adapted to assess international accreditation programmes. PMID:26351190

[Cost-effectiveness analysis in type 2 diabetes patients without hypertension].

PubMed

Villarreal-Ríos, Enrique; Vargas-Daza, Emma Rosa; Galicia-Rodríguez, Liliana; Martínez-González, Lidia; Neri-Calero, Claudia; Hernández-Centeno, María Guadalupe

2010-01-01

To determine SOHDi program cost-effectiveness (S = overweight, O = obesity, H = hypertension, Di = diabetes) in type 2 diabetes patients (DM2) without hypertension. Sample included 32 patients. The effectiveness was measured by the blood glucose values. The SOHDi intervention cost included physician medical attention cost (PMAC), laboratory cost (LC), education group cost and individual evaluation cost. The cost of the traditional alternative medical attention (TAMA) contemplated PMAC and LC. The analysis cost-effectiveness included different intervals measurements, equal or smaller than 140 mg/dL blood glucose levels. The percentage of population with equal or smaller than 140 mg/dL blood glucose (effectiveness) in SOHDi was 23.3%, in TAMA was 44.8%. The average cost in SOHDi was $2202.22; in TAMA $1930.79. In the cases with blood glucose equal or smaller to 140 mg/dL the cost of effectiveness of 50% was $4726 in SOHDi and $2155 in TAMA. In this same situation the effectiveness by $1000 was 10.58% in SOHDi and 23.20% in TAMA. The SOHDi group is not the best alternative, at least not in the present operational conditions.

Fuzzy multi-objective optimization case study based on an anaerobic co-digestion process of food waste leachate and piggery wastewater.

PubMed

Choi, Angelo Earvin Sy; Park, Hung Suck

2018-06-20

This paper presents the development and evaluation of fuzzy multi-objective optimization for decision-making that includes the process optimization of anaerobic digestion (AD) process. The operating cost criteria which is a fundamental research gap in previous AD analysis was integrated for the case study in this research. In this study, the mixing ratio of food waste leachate (FWL) and piggery wastewater (PWW), calcium carbonate (CaCO 3 ) and sodium chloride (NaCl) concentrations were optimized to enhance methane production while minimizing operating cost. The results indicated a maximum of 63.3% satisfaction for both methane production and operating cost under the following optimal conditions: mixing ratio (FWL: PWW) - 1.4, CaCO 3 - 2970.5 mg/L and NaCl - 2.7 g/L. In multi-objective optimization, the specific methane yield (SMY) was 239.0 mL CH 4 /g VS added , while 41.2% volatile solids reduction (VSR) was obtained at an operating cost of 56.9 US$/ton. In comparison with the previous optimization study that utilized the response surface methodology, the SMY, VSR and operating cost of the AD process were 310 mL/g, 54% and 83.2 US$/ton, respectively. The results from multi-objective fuzzy optimization proves to show the potential application of this technique for practical decision-making in the process optimization of AD process. Copyright © 2018 Elsevier Ltd. All rights reserved.

Life cycle costing as a decision making tool for technology acquisition in radio-diagnosis

PubMed Central

Chakravarty, Abhijit; Debnath, Jyotindu

2014-01-01

Background Life cycle costing analysis is an emerging conceptual tool to validate capital investment in healthcare. Methods A preliminary study was done to analyze the long-term cost impact of acquiring a new 3 T MRI system when compared to technological upgradation of the existing 1.5 T MRI system with a view to evolve a decision matrix for correct investment planning and technology management. Operating costing method was utilized to estimate cost per unit MRI scan, costing inputs were considered for the existing 1.5 T and the proposed 3 T machine. Cost for each expected year in the life span of both 1.5 T and 3 T MRI scan options were then discounted to its Net Present Value. Net Present Value thus calculated for both the alternative options of 1.5 T and 3 T MRI machine was charted along with various intangible but critical Figures of Merit (FOM) to create a decision matrix for capital investment planning. Result Considering all fixed and variable costs contributing towards assumed operation, unit cost per MRI procedure was found to be Rs. 4244.58 for the 1.5 T upgrade and Rs. 6059.37 for the new 3 T MRI machine. Life Cycle Cost Analysis of the proposed 1.5 T upgrade and new 3 T machine showed a Net Present Value of Rs. 42,148,587.80 and Rs. 27,587,842.38 respectively. Conclusion The utility of life cycle costing as a strategic decision making tool towards evaluating alternative options for capital investment planning in health care environment is reiterated. PMID:25609862

Systems analysis of solid fuel nuclear engines in cislunar space

NASA Astrophysics Data System (ADS)

Thomas, U.; Koelle, H. H.; Balzer-Sieb, R.; Bernau, D.; Czarnitzki, J.; Floete, A.; Goericke, D.; Lindenthal, A.; Protsch, R.; Teschner, O.

1984-12-01

The use of nuclear engines in cislunar space was studied and the restrictions imposed on nuclear ferries by the chemical Earth to lower Earth orbit (LEO) transportation system were analyzed. The operating conditions are best met by tungsten-water-moderated reactors due to a high specific impulse and long durability. Specific transportation cost for LEO to geostationary orbit (GEO) and LEO to lunar orbit flights were calculated for a transportation system life of 50 yr. Average transportation costs are estimated to be 141 $/kg. No difference is made for both routes. An additional analysis of smaller and larger flight units shows only small cost reductions by employing larger ferries but a significant cost increase in case smaller flight units are used.

Cost benefits of advanced software: A review of methodology used at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Joglekar, Prafulla N.

1993-01-01

To assist rational investments in advanced software, a formal, explicit, and multi-perspective cost-benefit analysis methodology is proposed. The methodology can be implemented through a six-stage process which is described and explained. The current practice of cost-benefit analysis at KSC is reviewed in the light of this methodology. The review finds that there is a vicious circle operating. Unsound methods lead to unreliable cost-benefit estimates. Unreliable estimates convince management that cost-benefit studies should not be taken seriously. Then, given external demands for cost-benefit estimates, management encourages software enginees to somehow come up with the numbers for their projects. Lacking the expertise needed to do a proper study, courageous software engineers with vested interests use ad hoc and unsound methods to generate some estimates. In turn, these estimates are unreliable, and the cycle continues. The proposed methodology should help KSC to break out of this cycle.

Sensitivity analysis to aid shelter management decisions: how does altering expenditure affect operational viability?

PubMed

Widmar, Nicole Olynk; Lord, Emily; Litster, Annette

2015-01-01

Streamlining purchasing in nonhuman animal shelters can provide multiple financial benefits. Streamlining shelter inputs and thus reducing shelter costs can include trading paid labor and management for fewer, more involved volunteers or purchasing large quantities of medical supplies from fewer vendors to take advantage of bulk-purchasing discounts. Beyond direct savings, time and energy spent on purchasing and inventory control can be reduced through careful management. Although cost-cutting measures may seem attractive, shelter managers are cautioned to consider the potential unintended consequences of short-term cost reduction measures that could limit revenues or increase costs in the future. This analysis illustrates an example of the impact of cost reductions in specific expense categories and the impact on shelter net revenue, as well as the share of expenses across categories. An in-depth discussion of labor and purchasing cost-reducing strategies in the real world of animal shelter management is provided.

Comparative analysis for various redox flow batteries chemistries using a cost performance model

NASA Astrophysics Data System (ADS)

Crawford, Alasdair; Viswanathan, Vilayanur; Stephenson, David; Wang, Wei; Thomsen, Edwin; Reed, David; Li, Bin; Balducci, Patrick; Kintner-Meyer, Michael; Sprenkle, Vincent

2015-10-01

The total energy storage system cost is determined by means of a robust performance-based cost model for multiple flow battery chemistries. Systems aspects such as shunt current losses, pumping losses and various flow patterns through electrodes are accounted for. The system cost minimizing objective function determines stack design by optimizing the state of charge operating range, along with current density and current-normalized flow. The model cost estimates are validated using 2-kW stack performance data for the same size electrodes and operating conditions. Using our validated tool, it has been demonstrated that an optimized all-vanadium system has an estimated system cost of < 350 kWh-1 for 4-h application. With an anticipated decrease in component costs facilitated by economies of scale from larger production volumes, coupled with performance improvements enabled by technology development, the system cost is expected to decrease to 160 kWh-1 for a 4-h application, and to 100 kWh-1 for a 10-h application. This tool has been shared with the redox flow battery community to enable cost estimation using their stack data and guide future direction.

Rotorcraft Low Altitude IFR Benefit/Cost Analysis: Operations Analysis

DTIC Science & Technology

1991-12-01

Anoll Len D. Dzamba Linda J. LaBelle Randahl N. Lindgren Robert B. Newman Deborah J. Peisen Systems Control Technology , Inc. 1611 N. Kent Street, Suite...Lindgren, Robert B. Newman, Deborah J. Peisen 9. Performing Organization Name and Address 10. Work Unit No. (TRAIS) Systems Control Technology , Inc. 1611...headquarters of United Technology /Sikorsky to get them through this area. 5.7.3.3 Communications Coverage Corporate/executive operators were well satisfied

System Evaluation and Life-Cycle Cost Analysis of a Commercial-Scale High-Temperature Electrolysis Hydrogen Production Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwin A. Harvego; James E. O'Brien; Michael G. McKellar

2012-11-01

Results of a system evaluation and lifecycle cost analysis are presented for a commercial-scale high-temperature electrolysis (HTE) central hydrogen production plant. The plant design relies on grid electricity to power the electrolysis process and system components, and industrial natural gas to provide process heat. The HYSYS process analysis software was used to evaluate the reference central plant design capable of producing 50,000 kg/day of hydrogen. The HYSYS software performs mass and energy balances across all components to allow optimization of the design using a detailed process flow sheet and realistic operating conditions specified by the analyst. The lifecycle cost analysismore » was performed using the H2A analysis methodology developed by the Department of Energy (DOE) Hydrogen Program. This methodology utilizes Microsoft Excel spreadsheet analysis tools that require detailed plant performance information (obtained from HYSYS), along with financial and cost information to calculate lifecycle costs. The results of the lifecycle analyses indicate that for a 10% internal rate of return, a large central commercial-scale hydrogen production plant can produce 50,000 kg/day of hydrogen at an average cost of $2.68/kg. When the cost of carbon sequestration is taken into account, the average cost of hydrogen production increases by $0.40/kg to $3.08/kg.« less

A NASPAC-Based Analysis of the Delay and Cost Effects of the Dallas/Fort Worth Metroplex Plan

DTIC Science & Technology

1992-10-01

Federal Aviation Administration Operations Research Service 14. Sponsoring Agency Code Washington, DC 20590 AOR-100 15. Supplementary Notes 16 . Abstract...LIST OF ILLUSTRATIONS Figure Page 1 DFW Area Airports 3 2 Forecasted Number of Daily Operations at DFW 12 3 Annual Savings at DFW with the Plan 16 4...Increase in System Operational Delay Without Plan 24 15 Average System Operational Delay 26 16 System Operational Delay Savings with Plan 26 17 System

Integrated cost-effectiveness analysis of agri-environmental measures for water quality.

PubMed

Balana, Bedru B; Jackson-Blake, Leah; Martin-Ortega, Julia; Dunn, Sarah

2015-09-15

This paper presents an application of integrated methodological approach for identifying cost-effective combinations of agri-environmental measures to achieve water quality targets. The methodological approach involves linking hydro-chemical modelling with economic costs of mitigation measures. The utility of the approach was explored for the River Dee catchment in North East Scotland, examining the cost-effectiveness of mitigation measures for nitrogen (N) and phosphorus (P) pollutants. In-stream nitrate concentration was modelled using the STREAM-N and phosphorus using INCA-P model. Both models were first run for baseline conditions and then their effectiveness for changes in land management was simulated. Costs were based on farm income foregone, capital and operational expenditures. The costs and effects data were integrated using 'Risk Solver Platform' optimization in excel to produce the most cost-effective combination of measures by which target nutrient reductions could be attained at a minimum economic cost. The analysis identified different combination of measures as most cost-effective for the two pollutants. An important aspect of this paper is integration of model-based effectiveness estimates with economic cost of measures for cost-effectiveness analysis of land and water management options. The methodological approach developed is not limited to the two pollutants and the selected agri-environmental measures considered in the paper; the approach can be adapted to the cost-effectiveness analysis of any catchment-scale environmental management options. Copyright © 2015 Elsevier Ltd. All rights reserved.

Modeling fuel treatment leverage: Encounter rates, risk reduction, and suppression cost impacts

Treesearch

Matthew P. Thompson; Karin L. Riley; Dan Loeffler; Jessica R. Haas

2017-01-01

The primary theme of this study is the cost-effectiveness of fuel treatments at multiple scales of investment. We focused on the nexus of fuel management and suppression response planning, designing spatial fuel treatment strategies to incorporate landscape features that provide control opportunities that are relevant to fire operations. Our analysis explored the...

An Operationally Responsive Space Architecture for 2025

DTIC Science & Technology

2008-06-22

Organizational Relationships, Asset Loss Mitigation, Availability, Flexibility, and Streamlined Acquisition Processes . These pillars allowed the solutions...were considered. Analysis was further supported by a performance versus cost process which provided a final test of solution feasibility. Relative cost...Availability, Flexibility, and Streamlined Acquisition Processes . These pillars allowed the solutions, material and non-material, to be organized for

Global Hawk: Root Cause Analysis of Projected Unit Cost Growth

DTIC Science & Technology

2011-05-01

December 2009 Selected Acquisition Report (SAR), an Initial Operational Test & v Evaluation (“ IOT &E Phase II”) was planned for July–October 2010. The...PAT & mod facility 8% Diminishing Mfg Sources 3% “ IOT &E Replan” 3% ASIP calibration facility 1% Revised Cost Estimates Missing CDD Content...Diminishing Manufacturing Sources (DMS) ..............................................20 j. “ IOT &E Replan

The Costs of Implementing Federally Mandated Social Programs at Colleges and Universities. Policy Analysis Service Special Report.

ERIC Educational Resources Information Center

Van Alstyne, Carol; Coldren, Sharon L.

Federally mandated social programs that apply to colleges and universities because they are treated as business entities are covered in this report. These programs have contributed to the continually increasing operating costs of colleges and universities over the last decade. This study aims at providing quantified examples of these cost…

Determination of Selected Costs of Flight and Synthetic Flight Training.

ERIC Educational Resources Information Center

Jolley, Oran B.; Caro, Paul W., Jr.

As part of an analysis of the value of synthetic (simulated) training in the U.S. Army Aviation School, costs associated with the conduct of flight and synthetic training in the instrument phase of the Army's Officer/Warrant Officer Rotary Wing Aviator Course (helicopter operation) were identified and computed separately for each type of training.…

78 FR 42986 - Submission for Review: Survivor Annuity Election for a Spouse, RI 20-63; Cover Letter Giving...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-18

.... This letter may be used to ask for more information. Analysis Agency: Retirement Operations, Retirement... 20-63; Cover Letter Giving Information About The Cost To Elect Less Than the Maximum Survivor Annuity, RI 20-116; Cover Letter Giving Information About The Cost To Elect the Maximum Survivor Annuity, RI...

Cost optimisation and minimisation of the environmental impact through life cycle analysis of the waste water treatment plant of Bree (Belgium).

PubMed

De Gussem, K; Wambecq, T; Roels, J; Fenu, A; De Gueldre, G; Van De Steene, B

2011-01-01

An ASM2da model of the full-scale waste water plant of Bree (Belgium) has been made. It showed very good correlation with reference operational data. This basic model has been extended to include an accurate calculation of environmental footprint and operational costs (energy consumption, dosing of chemicals and sludge treatment). Two optimisation strategies were compared: lowest cost meeting the effluent consent versus lowest environmental footprint. Six optimisation scenarios have been studied, namely (i) implementation of an online control system based on ammonium and nitrate sensors, (ii) implementation of a control on MLSS concentration, (iii) evaluation of internal recirculation flow, (iv) oxygen set point, (v) installation of mixing in the aeration tank, and (vi) evaluation of nitrate setpoint for post denitrification. Both an environmental impact or Life Cycle Assessment (LCA) based approach for optimisation are able to significantly lower the cost and environmental footprint. However, the LCA approach has some advantages over cost minimisation of an existing full-scale plant. LCA tends to chose control settings that are more logic: it results in a safer operation of the plant with less risks regarding the consents. It results in a better effluent at a slightly increased cost.