NASA flight cell and battery issues

NASA Technical Reports Server (NTRS)

Schulze, N. R.

1989-01-01

The author presents the important battery and cell problems, encompassing both test failures and accidents, which were encountered during the past year. Practical issues facing programs, which have to be considered in the development of a battery program strategy, are addressed. The problems of one program, the GRO (Gamma Ray Observatory), during the past year are focused on to illustrate the fundamental types of battery problems that occur. Problems encountered by other programs are briefly mentioned to complete the accounting. Two major categories of issues are defined, namely, whose which are quality and design related, i.e., problems having inherent manufacturing-process-related aspects with an impact on cell reliability, and these which are accident triggered or man induced, i.e., those operational issues having an impact on battery and cell reliability.

In Defense of the Vendors

ERIC Educational Resources Information Center

Irwin, G. Brockett

1975-01-01

The problems that are encountered when cooperation breaks down between the industrial source operator and the pollution control equipment vendor are examined. The focal point of this examination is the study of defenses available to the equipment vendor when industrial source operators refuse to cooperate. (Author/BT)

The application of the statistical theory of extreme values to gust-load problems

NASA Technical Reports Server (NTRS)

Press, Harry

1950-01-01

An analysis is presented which indicates that the statistical theory of extreme values is applicable to the problems of predicting the frequency of encountering the larger gust loads and gust velocities for both specific test conditions as well as commercial transport operations. The extreme-value theory provides an analytic form for the distributions of maximum values of gust load and velocity. Methods of fitting the distribution are given along with a method of estimating the reliability of the predictions. The theory of extreme values is applied to available load data from commercial transport operations. The results indicate that the estimates of the frequency of encountering the larger loads are more consistent with the data and more reliable than those obtained in previous analyses. (author)

Manpower Training in Community Colleges.

ERIC Educational Resources Information Center

Korim, Andrew S.

The pamphlet's eight chapters review the results of a survey of community colleges, discuss some of the strengths of community colleges as they pertain to manpower training, and identify problems encountered in the operation of training programs. In addition, the development, organization, and operation of comprehensive manpower training skills…

Mariner 10 Venus encounter. [scientific objectives and instruments for flyby observations

NASA Technical Reports Server (NTRS)

Dunne, J. A.

1974-01-01

Review of the scientific objectives of the Mariner 10 mission with regard to observations of Venus during a flyby, and description of the equipment installed on the spacecraft to fulfill these objectives. A detailed description is given of the hardware modifications made to the payload specifically for the Venus sequence. In discussing the encounter operations, two spacecraft problems which significantly affected the Venus encounter sequence are cited - namely, a failure of the television optic heaters to come on shortly after launch, and the occurrence of a roll gyro oscillation.

The BAPE 2 balloon-borne CO2

NASA Technical Reports Server (NTRS)

Degnan, J. J.; Walker, H. E.; Peruso, C. J.; Johnson, E. H.; Klein, B. J.; Mcelroy, J. H.

1972-01-01

The systems and techniques which were utilized in the experiment to establish an air-to-ground CO2 laser heterodyne link are described along with the successes and problems encountered when the heterodyne receiver and laser transmitter package were removed from the controlled environment of the laboratory. Major topics discussed include: existing systems and the underlying principles involved in their operation; experimental techniques and optical alignment methods which were found to be useful; theoretical calculations of signal strengths expected under a variety of test conditions and in actual flight; and the experimental results including problems encountered and their possible solutions.

A Simplified Instrument for Recording and Indicating Frequency and Intensity of Icing Conditions Encountered in Flight

NASA Technical Reports Server (NTRS)

Perkins, Porter J; Mccullough, Stuart; Lewis, Ralph D

1951-01-01

An instrument for recording and indicating the frequency and intensity of aircraft icing conditions encountered in flight has been developed by the NACA Lewis Laboratory to obtain statistical icing data over world-wide air routes during routine airline operations. The operation of the instrument is based on the creation of a differential pressure between an ice-free total-pressure system and a total-pressure system in which small total-pressure holes vented to static pressure are allowed to plug with ice accretion. The simplicity of this operating principle permits automatic operation, and provides relative freedom from maintenance and operating problems. The complete unit weighing only 18 pounds records icing rate, airspeed, and altitude on photographic film and provides visual indications of icing intensity to the pilot.

U. S. Naval Forces, Vietnam Monthly Historical Summary for December 1970

DTIC Science & Technology

1971-02-15

cable 3 cans of pull friction fuze lighters 2 electronic repair kits 1 bag of outboard motor repair parts 4 large bags of medical supplies and food ...problems encountered in the operation such as an operation order in Franch which the Vietnamese participants could not readsand raw and un:rained Cambodian

Apollo experience report: The AN/ARD-17 direction finding system

NASA Technical Reports Server (NTRS)

Chase, W. R.; Middleton, W. A.

1975-01-01

This report contains a statement of the operational philosophy and requirements leading to the development of the AN/ARD-17 direction-finding system. The technical problems encountered and the solutions devised in the AN/ARD-17 development are discussed. An evaluation of the system under actual operational conditions is included.

Parkes radio science system design and testing for Voyager Neptune encounter

NASA Technical Reports Server (NTRS)

Rebold, T. A.; Weese, J. F.

1989-01-01

The Radio Science System installed at Parkes, Australia for the Voyager Neptune encounter was specified to meet the same stringent requirements that were imposed upon the Deep Space Network Radio Science System. The system design and test methodology employed to meet these requirements at Parkes are described, and data showing the measured performance of the system are presented. The results indicate that the system operates with a comfortable margin on the requirements. There was a minor problem with frequency-dependent spurious signals which could not be fixed before the encounter. Test results characterizing these spurious signals are included.

Nuclear Safety Information Center, Its Products and Services

ERIC Educational Resources Information Center

Buchanan, J. R.

1970-01-01

The Nuclear Safety Information Center (NSIC) serves as a focal point for the collection, analysis and dissemination of information related to safety problems encountered in the design, analysis, and operation of nuclear facilities. (Author/AB)

Moisture Control Guidance for Commercial and Public ...

EPA Pesticide Factsheets

This document provides guidance to designers, construction mangers, and building operation/maintenance managers to improve IEQ and reduce risks of encountering IEQ problems due to insufficient moisture control. EPA will be producing a document entitled

Unmanned Aerial Vehicle Operational Test and Evaluation Lessons Learned

DTIC Science & Technology

2003-12-01

prevented during the test design phase. Test designers should ensure that the appropriate data can be collected in sample sizes large enough to support...encountered during previous tests in an attempt to prevent them from occurring in future tests. The focus of this paper is on UAVs acquired to perform...CHAPTER III TEST DESIGN III. TEST DESIGN Many of the problems encountered during UAV OT could have been prevented during the test

Real-Time Embedded High Performance Computing: Communications Scheduling.

DTIC Science & Technology

1995-06-01

real - time operating system must explicitly limit the degradation of the timing performance of all processes as the number of processes...adequately supported by a real - time operating system , could compound the development problems encountered in the past. Many experts feel that the... real - time operating system support for an MPP, although they all provide some support for distributed real-time applications. A distributed real

Operational procedures for ground station operation: ATS-3 Hawaii-Ames satellite link experiment

NASA Technical Reports Server (NTRS)

Nishioka, K.; Gross, E. H.

1979-01-01

Hardware description and operational procedures for the ATS-3 Hawaii-Ames satellite computer link are presented in basic step-by-step instructions. Transmit and receive channels and frequencies are given. Details such as switch settings for activating the station to the sequence of turning switches on are provided. Methods and procedures for troubleshooting common problems encountered with communication stations are also provided.

Evaluation of geophysical properties of the lunar regolith for the design of precursor scientific missions for the space exploration initiative

NASA Technical Reports Server (NTRS)

Morgan, Paul

1990-01-01

The following topics are addressed: (1) the frequency of encountering boulders that represent hazards to lunar operations; (2) the ease of lunar soil excavation; (3) the use of explosives in excavation operation; (4) the trafficability of the regolith; (5) problems encountered in mining (probably strip mining) of the regolith; (6) the stable angle(s) of repose in excavation of the regolith; (7) the layering to be encountered in the subsurface; (8) knowledge of the regolith site and the possibility of its general application to any site on the lunar surface; (9) the data needed to characterize a site for a lunar base; (10) the influence of regolith properties on the design of geophysical experiments from the lunar base; and (11) terrestrial analogues for the geophysical properties of the lunar regolith.

Extending Basic Learning Opportunities: Challenge and Response. UNESCO-UNICEF Co-operative Programme Digest No. 16.

ERIC Educational Resources Information Center

Prakasha, Veda; And Others

This digest focuses on problems encountered in the expansion of facilities for universal primary education and responses being developed to overcome these problems. The central message of the document is that nonformal structures of learning and community involvement play a key role in the expansion of basic learning opportunities in the…

78 FR 16876 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses and Combined Licenses...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

....'' For problems with ADAMS, please contact the NRC's Public Document Room (PDR) reference staff at 1-800...://www.nrc.gov/reading-rm/adams.html . Persons who do not have access to ADAMS or who encounter problems... basis perspective they do affect the probability that missiles generated by the winds of the tornado...

Little Reason for Being: A Case of School District Dissolution.

ERIC Educational Resources Information Center

Ellis, Pam

In 1980, Tonnelly Central School District became the first school district in New York State to be dissolved pursuant to Section 1505 of Education Law, marking the first use of dissolution and annexation as a means by which to address the programmatic and management problems encountered in the operation of a central school district. Problems faced…

Handbook of experiences in the design and installation of solar heating and cooling systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ward, D.S.; Oberoi, H.S.

1980-07-01

A large array of problems encountered are detailed, including design errors, installation mistakes, cases of inadequate durability of materials and unacceptable reliability of components, and wide variations in the performance and operation of different solar systems. Durability, reliability, and design problems are reviewed for solar collector subsystems, heat transfer fluids, thermal storage, passive solar components, piping/ducting, and reliability/operational problems. The following performance topics are covered: criteria for design and performance analysis, domestic hot water systems, passive space heating systems, active space heating systems, space cooling systems, analysis of systems performance, and performance evaluations. (MHR)

Test results of the DOE/Sandia 17 meter VAWT

NASA Technical Reports Server (NTRS)

Nellums, R. O.; Worstell, M. H.

1979-01-01

A review is given of the test program of a 17 meter Vertical Axis Wind Turbine VAWT. Performance test results are discussed including difficulties encountered during the VAWT operation along with ways of solving these problems.

Detection of structural deterioration and associated airline maintenance problems

NASA Technical Reports Server (NTRS)

Henniker, H. D.; Mitchell, R. G.

1972-01-01

Airline operations involving the detection of structural deterioration and associated maintenance problems are discussed. The standard approach to the maintenance and inspection of aircraft components and systems is described. The frequency of inspections and the application of preventive maintenance practices are examined. The types of failure which airline transport aircraft encounter and the steps taken to prevent catastrophic failure are reported.

A Silent Revolution: From Sketching to Coding--A Case Study on Code-Based Design Tool Learning

ERIC Educational Resources Information Center

Xu, Song; Fan, Kuo-Kuang

2017-01-01

Along with the information technology rising, Computer Aided Design activities are becoming more modern and more complex. But learning how to operation these new design tools has become the main problem lying in front of each designer. This study was purpose on finding problems encountered during code-based design tools learning period of…

Metal with a memory provides useful tool for Skylab astronauts

NASA Technical Reports Server (NTRS)

Smith, G. A.

1975-01-01

Extendible booms used to convey film cassettes weighing 56.7 kg (125 lb) between the Airlock Module and the Apollo Telescope Mount are described along with the dispensing mechanism. Problems encountered with the mechanism during the test program are discussed. These problems were mainly associated with operation in cold temperature, lubrication, and the motor/gearhead assembly. Another set of problems which arose during crew training in the MSFC water tank is also discussed.

Science aspects of a 1980 flyby of Comet Encke with a Pioneer spacecraft

NASA Technical Reports Server (NTRS)

Jaffe, L. D.; Elachi, C.; Giffin, C. E.; Huntress, W.; Newburn, R. L.; Parker, R. H.; Taylor, F. W.; Thorpe, T. E.

1974-01-01

Results are presented of an investigation of the feasibility of a 1980 flyby of Comet Encke using a Pioneer class spacecraft. Specific areas studied include: science objectives and rationale; science observables; effects of encounter velocity; science encounter and targeting requirements; selection and description of science instruments; definition of a candidate science payload; engineering characteristics of suggested payload; value of a separable probe; science instruments for a separable probe; science payload integration problems; and science operations profile.

Abdomino-perineal approach for management of traumatic strictured posterior urethra.

PubMed

Ezzat, M I

1990-01-01

Twelve patients with traumatic posterior urethral stricture have been treated using a combined transpubic-transperineal approach. The strictured segments were long and associated with complicated problems in 4 patients. Three of them have had bulbo-vesical anastomosis operation, and iatrogenic urethro-rectal fistula was encountered in the fourth patient. Combined approach provided the best chance for success. Our results of urethral lumen patency and continence of urine were excellent. However, we encountered 7 patients dissatisfied with their erection.

[Evaluation of the standard application of Delphi in the diagnosis of chronic obstructive pulmonary disease caused by occupational irritant chemicals].

PubMed

Zhao, L; Yan, Y J

2017-11-20

Objective: To investigate the problems encountered in the application of the standard (hereinafter referred to as standard) for the diagnosis of chronic obstructive pulmonary disease caused by occu-pational irritant chemicals, to provide reference for the revision of the new standard, to reduce the number of missed patients in occupational COPD, and to get rid of the working environment of those who suffer from chronic respiratory diseases due to long-term exposure to poisons., slowing the progression of the disease. Methods: Using Delphi (Delphi) Expert research method, after the senior experts to demonstrate, to under-stand the GBZ 237-2011 "occupational irritant chemicals to the diagnosis of chronic obstructive pulmonary dis-ease" standard evaluation of the system encountered problems, to seek expert advice, The problems encoun-tered during the clinical implementation of the standards promulgated in 2011 are presented. Results: Through the Delphi Expert investigation method, it is found that experts agree on the content evaluation and implemen-tation evaluation in the standard, but the operational evaluation of the standard is disputed. According to the clinical experience, the experts believe that the range of occupational irritant gases should be expanded, and the operation of the problem of smoking, seniority determination and occupational contact history should be challenged during the diagnosis. Conclusions: Since the promulgation in 2011 of the criteria for the diagnosis of chronic obstructive pulmonary disease caused by occupational stimulant chemicals, there have been some problems in the implementation process, which have caused many occupationally exposed to irritating gases to suffer from "occupational chronic respiratory Diseases" without a definitive diagnosis.

Ethical problems and moral sensitivity in physiotherapy: a descriptive study.

PubMed

Kulju, Kati; Suhonen, Riitta; Leino-Kilpi, Helena

2013-08-01

This study identified and described ethical problems encountered by physiotherapists in their practice and physiotherapists' moral sensitivity in ethical situations. A questionnaire-based survey was constructed to identify ethical problems, and the Moral Sensitivity Questionnaire Revised version was used to measure moral sensitivity. Physiotherapists (n = 116) working in public health services responded to the questionnaire. Based on the results, most of the physiotherapists encounter ethical problems weekly. They concern mainly financial considerations, equality and justice, professionalism, unethical conduct of physiotherapists or other professions and patients' self-determination. The dimension of moral strength was emphasised in physiotherapists' self-evaluations of their moral sensitivity. As a conclusion, ethical problems do occur not only at individual level but also at organisational and society level. Physiotherapists seem to have moral strength for speaking on behalf of the patient. Scarce resources make them feel insufficient but much could still be done to provide quality care in co-operation with other health-care professionals.

The operant-respondent distinction: Future directions

PubMed Central

Pear, Joseph J.; Eldridge, Gloria D.

1984-01-01

The operant-respondent distinction has provided a major organizing framework for the data generated through the experimental analysis of behavior. Problems have been encountered, however, in using it as an explanatory concept for such phenomena as avoidance and conditioned suppression. Data now exist that do not fit neatly into the framework. Moreover, the discovery of autoshaping has highlighted difficulties in isolating the two types of behavior and conditioning. Despite these problems, the operant-respondent framework remains the most successful paradigm currently available for organizing behavioral data. Research and theoretical efforts should therefore probably be directed to modifying the framework to account for disparate data. PMID:16812402

Moisture Control Guidance for Commercial and Public Buildings (EPA 402-F-13053)

EPA Science Inventory

This document provides guidance to designers, construction mangers, and building operation/maintenance managers to improve IEQ and reduce risks of encountering IEQ problems due to insufficient moisture control. EPA will be producing a document entitled "Moisture Control Guida...

NaK loop testing of thermoelectric converter modules (SNAP program)

NASA Technical Reports Server (NTRS)

Johnson, J. L.

1973-01-01

The history of testing of compact tubular modules in flowing NaK loops is summarized. Test procedures, data handling, and instrument calibration are discussed. Also included is descriptive information of the test facilities, operational problems encountered, and some recommendations for testing.

Fashions in Instructional Development.

ERIC Educational Resources Information Center

Knapper, Christopher K.

This paper on instructional development notes the trend toward teaching improvement efforts, classifies instructional development centers in terms of their differing philosophies of operation, and identifies some general problems that have been encountered in institutional efforts to improve teaching and learning. Centers in North America, Europe,…

Some Operating Experience and Problems Encountered During Operation of a Free-jet Facility

NASA Technical Reports Server (NTRS)

Mcaulay, John E; Prince, William R

1957-01-01

During a free-jet investigation of a 28-inch ram-jet engine at a Mach number of 2.35, flow pulsation at the engine inlet were discovered which proved to have an effect on the engine performance and operational characteristics, particularly the engine rich blowout limits. This report discusses the finding of the flow pulsations, their elimination, and effect. Other facility characteristics, such as the establishment of flow simulation and the degree of subcritical operation of the diffuser, are also explained.

Beam transport results on the multi-beam MABE accelerator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, P.D.; Alexander, J.A.; Hasti, D.E.

1985-10-01

MABE is a multistage, electron beam linear accelerator. The accelerator has been operated in single beam (60 kA, 7 Mev) and multiple beam configurations. This paper deals with the multiple beam configuration in which typically nine approx. = 25 kA injected beams are transported through three accelerating gaps. Experimental results from the machine are discussed, including problems encountered and proposed solutions to those problems.

Dynamics of high-bypass-engine thrust reversal using a variable-pitch fan

NASA Technical Reports Server (NTRS)

Schaefer, J. W.; Sagerser, D. R.; Stakolich, E. G.

1977-01-01

The test program demonstrated that successful and rapid forward-to reverse-thrust transients can be performed without any significant engine operational limitations for fan blade pitch changes through either feather pitch or flat pitch. For through-feather-pitch operation with a flight inlet, fan stall problems were encountered, and a fan blade overshoot technique was used to establish reverse thrust.

Methods and costs associated with outfitting light aircraft for remote sensing applications

NASA Technical Reports Server (NTRS)

Rhodes, O. L.; Zetka, E. F.

1973-01-01

This document was designed to provide the potential user of a light aircraft remote sensor platform/data gathering system with general information on aircraft definition, implementation complexity, costs, scheduling and operational factors involved in this type of activity. Most of the subject material was developed from actual situations and problem areas encountered during the build-up cycle and early phases of flight operations.

Industrial Partners in the Education of an Engineer

ERIC Educational Resources Information Center

Smith, Barnard E.

1973-01-01

Discusses the theory, operation, and practical problems encountered in conducting a professional program which emphasizes close contact with industrial engineers in engineering education. Indicates that the partnership program provides one means for firms to participate in educational activities while serving their own interests. (CC)

Development of Emergency Intravehicular Spacesuit (EIS) assembly

NASA Technical Reports Server (NTRS)

1973-01-01

A program was undertaken to develop and test two prototype pressure suits to operate at pressures up to 413 mm Hg (8.0 PSIG). The units were designated Emergency Intravehicular Spacesuits (EIS). Performance requirements, design evolution, testing performed, problems encountered, and final EIS configuration are reported.

Impact of Advanced Avionics Technology on Ground Attack Weapon Systems.

DTIC Science & Technology

1982-02-01

as the relevant feature. 3.0 Problem The task is to perform the automatic cueing of moving objects in a natural environment . Additional problems...views on this subject to the American Defense Preparedness Association (ADPA) on 11 February 1981 in Orlando, Florida. ENVIRONMENTAL CONDITIONS OUR...the operating window or the environmental conditions of combat that our forces may encounter worldwide. The three areas selected were Europe, the

Report of an Urban Education Reform Experiment: Problems and Promises. Section II: Project Evaluation. Supplement to the Final Report of the 5th Cycle Teacher Corps Project.

ERIC Educational Resources Information Center

Rippey, Robert M.

This document recounts the efforts of an urban college of education (the one at the University of Illinois/Chicago Circle) to develop a cooperative program in urban teacher education. It deals with the origin of the project, operational problems encountered, solutions attempted, critical functions of systematic evaluation. Also included are…

Role Modeling for FNP Students.

ERIC Educational Resources Information Center

Sherman, Jane Ehlinger

1980-01-01

A model is described in which student nurses' preceptors are the joint-appointee nurse practitioners, with physicians providing consultation and serving as team participants. Key points that are examined are program development at the University of Illinois, how the program actually operated, and some of the problems encountered. (CT)

Management Training for Directors.

ERIC Educational Resources Information Center

Yaptinchay, Karen

1998-01-01

Describes a management program for Head Start directors called the Head Start-Johnson & Johnson Management Fellows program that focuses on issues and problems encountered by directors in implementing and operating programs at the local level. Notes that the management program represents a response to increasing need for cost-effective and…

Calibration and evaluation of a dispersant application system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shum, J.S.

1987-05-01

The report presents recommended methods for calibrating and operating boat-mounted dispersant application systems. Calibration of one commercially-available system and several unusual problems encountered in calibration are described. Charts and procedures for selecting pump rates and other operating parameters in order to achieve a desired dosage are provided. The calibration was performed at the EPA's Oil and Hazardous Materials Simulated Environmental Test Tank (OHMSETT) facility in Leonardo, New Jersey.

Simulator Studies of the Deep Stall

NASA Technical Reports Server (NTRS)

White, Maurice D.; Cooper, George E.

1965-01-01

Simulator studies of the deep-stall problem encountered with modern airplanes are discussed. The results indicate that the basic deep-stall tendencies produced by aerodynamic characteristics are augmented by operational considerations. Because of control difficulties to be anticipated in the deep stall, it is desirable that adequate safeguards be provided against inadvertent penetrations.

The Range of Null Operators: Evidence from Clefting.

ERIC Educational Resources Information Center

Heggie, Lorie

Grammatical theories that rely exclusively on the categorical nature of constituents to determine their syntactic behavior encounter problems when dealing with cleft construction. The ungrammaticality of such constructions is indeed syntactic in nature and can be shown to derive from a general principle of universal grammar (UG), restricting the…

Applications of Combinatorial Programming to Data Analysis: The Traveling Salesman and Related Problems

ERIC Educational Resources Information Center

Hubert, Lawrence J.; Baker, Frank B.

1978-01-01

The "Traveling Salesman" and similar combinatorial programming tasks encountered in operations research are discussed as possible data analysis models in psychology, for example, in developmental scaling, Guttman scaling, profile smoothing, and data array clustering. A short overview of various computational approaches from this area of…

Analysis of severe atmospheric disturbances from airline flight records

NASA Technical Reports Server (NTRS)

Wingrove, R. C.; Bach, R. E., Jr.; Schultz, T. A.

1989-01-01

Advanced methods were developed to determine time varying winds and turbulence from digital flight data recorders carried aboard modern airliners. Analysis of several cases involving severe clear air turbulence encounters at cruise altitudes has shown that the aircraft encountered vortex arrays generated by destabilized wind shear layers above mountains or thunderstorms. A model was developed to identify the strength, size, and spacing of vortex arrays. This model is used to study the effects of severe wind hazards on operational safety for different types of aircraft. The study demonstrates that small remotely piloted vehicles and executive aircraft exhibit more violent behavior than do large airliners during encounters with high-altitude vortices. Analysis of digital flight data from the accident at Dallas/Ft. Worth in 1985 indicates that the aircraft encountered a microburst with rapidly changing winds embedded in a strong outflow near the ground. A multiple-vortex-ring model was developed to represent the microburst wind pattern. This model can be used in flight simulators to better understand the control problems in severe microburst encounters.

Apollo experience report: Guidance and control systems. Lunar module stabilization and control system

NASA Technical Reports Server (NTRS)

Shelton, D. H.

1975-01-01

A brief functional description of the Apollo lunar module stabilization and control subsystem is presented. Subsystem requirements definition, design, development, test results, and flight experiences are discussed. Detailed discussions are presented of problems encountered and the resulting corrective actions taken during the course of assembly-level testing, integrated vehicle checkout and test, and mission operations. Although the main experiences described are problem oriented, the subsystem has performed satisfactorily in flight.

An adaptive large neighborhood search heuristic for Two-Echelon Vehicle Routing Problems arising in city logistics

PubMed Central

Hemmelmayr, Vera C.; Cordeau, Jean-François; Crainic, Teodor Gabriel

2012-01-01

In this paper, we propose an adaptive large neighborhood search heuristic for the Two-Echelon Vehicle Routing Problem (2E-VRP) and the Location Routing Problem (LRP). The 2E-VRP arises in two-level transportation systems such as those encountered in the context of city logistics. In such systems, freight arrives at a major terminal and is shipped through intermediate satellite facilities to the final customers. The LRP can be seen as a special case of the 2E-VRP in which vehicle routing is performed only at the second level. We have developed new neighborhood search operators by exploiting the structure of the two problem classes considered and have also adapted existing operators from the literature. The operators are used in a hierarchical scheme reflecting the multi-level nature of the problem. Computational experiments conducted on several sets of instances from the literature show that our algorithm outperforms existing solution methods for the 2E-VRP and achieves excellent results on the LRP. PMID:23483764

An adaptive large neighborhood search heuristic for Two-Echelon Vehicle Routing Problems arising in city logistics.

PubMed

Hemmelmayr, Vera C; Cordeau, Jean-François; Crainic, Teodor Gabriel

2012-12-01

In this paper, we propose an adaptive large neighborhood search heuristic for the Two-Echelon Vehicle Routing Problem (2E-VRP) and the Location Routing Problem (LRP). The 2E-VRP arises in two-level transportation systems such as those encountered in the context of city logistics. In such systems, freight arrives at a major terminal and is shipped through intermediate satellite facilities to the final customers. The LRP can be seen as a special case of the 2E-VRP in which vehicle routing is performed only at the second level. We have developed new neighborhood search operators by exploiting the structure of the two problem classes considered and have also adapted existing operators from the literature. The operators are used in a hierarchical scheme reflecting the multi-level nature of the problem. Computational experiments conducted on several sets of instances from the literature show that our algorithm outperforms existing solution methods for the 2E-VRP and achieves excellent results on the LRP.

Demonstration of a tool for automatic learning and re-use of knowledge in the activated sludge process.

PubMed

Comas, J; Rodríguez-Roda, I; Poch, M; Gernaey, K V; Rosen, C; Jeppsson, U

2006-01-01

Wastewater treatment plant operators encounter complex operational problems related to the activated sludge process and usually respond to these by applying their own intuition and by taking advantage of what they have learnt from past experiences of similar problems. However, previous process experiences are not easy to integrate in numerical control, and new tools must be developed to enable re-use of plant operating experience. The aim of this paper is to investigate the usefulness of a case-based reasoning (CBR) approach to apply learning and re-use of knowledge gained during past incidents to confront actual complex problems through the IWA/COST Benchmark protocol. A case study shows that the proposed CBR system achieves a significant improvement of the benchmark plant performance when facing a high-flow event disturbance.

NMESys: An expert system for network fault detection

NASA Technical Reports Server (NTRS)

Nelson, Peter C.; Warpinski, Janet

1991-01-01

The problem of network management is becoming an increasingly difficult and challenging task. It is very common today to find heterogeneous networks consisting of many different types of computers, operating systems, and protocols. The complexity of implementing a network with this many components is difficult enough, while the maintenance of such a network is an even larger problem. A prototype network management expert system, NMESys, implemented in the C Language Integrated Production System (CLIPS). NMESys concentrates on solving some of the critical problems encountered in managing a large network. The major goal of NMESys is to provide a network operator with an expert system tool to quickly and accurately detect hard failures, potential failures, and to minimize or eliminate user down time in a large network.

Catalog of Apollo experiment operations

NASA Technical Reports Server (NTRS)

Sullivan, Thomas A.

1994-01-01

This catalog reviews Apollo mission reports, preliminary science reports, technical crew debriefings, lunar surface operations plans, and various relevant lunar experiment documents, collecting engineering- and operation-specific information by experiment. It is organized by discrete experimental and equipment items emplaced or operated on the lunar surface or at zero gravity during the Apollo missions. It also attempts to summarize some of the general problems encountered on the surface and provides guidelines for the design of future lunar surface experiments with an eye toward operations. Many of the problems dealt with on the lunar surface originated from just a few novel conditions that manifested themselves in various nasty ways. Low gravity caused cables to stick up and get caught on feet, and also made it easy for instruments to tip over. Dust was a problem and caused abrasion, visibility, and thermal control difficulties. Operating in a pressure suit limited a person's activity, especially in the hands. I hope to capture with this document some of the lessons learned from the Apollo era to make the jobs of future astronauts, principle investigators, engineers, and operators of lunar experiments more productive.

Techniques for shuttle trajectory optimization

NASA Technical Reports Server (NTRS)

Edge, E. R.; Shieh, C. J.; Powers, W. F.

1973-01-01

The application of recently developed function-space Davidon-type techniques to the shuttle ascent trajectory optimization problem is discussed along with an investigation of the recently developed PRAXIS algorithm for parameter optimization. At the outset of this analysis, the major deficiency of the function-space algorithms was their potential storage problems. Since most previous analyses of the methods were with relatively low-dimension problems, no storage problems were encountered. However, in shuttle trajectory optimization, storage is a problem, and this problem was handled efficiently. Topics discussed include: the shuttle ascent model and the development of the particular optimization equations; the function-space algorithms; the operation of the algorithm and typical simulations; variable final-time problem considerations; and a modification of Powell's algorithm.

Retention and application of Skylab experiment experiences to future programs

NASA Technical Reports Server (NTRS)

Milly, N.; Gillespie, V. G.

1974-01-01

Problems encountered on Skylab Experiments are listed in order that these experiences and associated recommendations might help to prevent similar problems on future programs. The criteria for selection of the data to be utilized was to identify the problem areas within the Skylab Program which would be of major significance with respect to future programs. Also, the problem had to be unique in that it would help identify to a designer/manufacturer an unforeseen or unanticipated occurrence which could cause failures, delays, or additional cost. Only those unexpected problems that may occur due to the nature of aerospace experiment environmental and operational requirements are included.

Anesthetic management of achondroplastic dwarf undergoing cesarean section--a case report.

PubMed

Cevik, Banu; Colakoğlu, Serhan

2010-10-01

There are more than 100 different types of dwarfism. Achondroplasia is the most common of these conditions. The aim of this report is to describe the anesthetic management of these patient, discussing the anesthetic considerations and emphasizing the difficulties encountered. A 32-year-old achondroplastic parturient underwent cesarean section under general anesthesia. We did not encounter problems related with airway management. The operation went without any complication. There are risks for both regional and general anesthesia in achondroplastic patients. The most important point is the careful preoperative assessment. Anesthesia plan should be specified to individual basis.

Planning for management information systems in drug treatment organizations.

PubMed

Zalkind, D; Zelon, H; Moore, M; Kaluzny, A

1979-02-01

An attempt to set up a management information system for individual drug abuse programs throughout a state is described. The principles upon which the system is based are discussed along with the problems encountered in its implementation. A series of guidelines for establishing management information systems in operating human services agencies is included.

Solar heating and hot water system installed at Charlotte Memorial Hospital, Charlotte, North Carolina

NASA Technical Reports Server (NTRS)

1981-01-01

Detailed information regarding the design and installation of a heating and hot water system in a commercial application is given. This information includes descriptions of system and building, design philosophy, control logic operation modes, design and installation drawing and a brief description of problems encountered and their solutions.

Entry of Young People into Working Life. General Report.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

This booklet examines the problems encountered by youth while making the school-to-work transition and analyzes the measures undertaken in the Organization for Economic Co-operation and Development (OECD) member countries to deal with youth unemployment. Part I in an analysis of young people's difficulties in entering the working life describes…

DSS 13 microprocessor antenna controller

NASA Technical Reports Server (NTRS)

Gosline, R. M.

1988-01-01

A microprocessor-based antenna monitor and control system with multiple CPUs are described. The system was developed as part of the unattended station project for DSS 13 and was enhanced for use by the SETI project. The operational features, hardware, and software designs are described, and a discussion is provided of the major problems encountered.

The design, development and qualification of a lightweight antenna pointing mechanism

NASA Technical Reports Server (NTRS)

Shmulevitz, M.; Halsband, A.

1996-01-01

This paper describes the design, development, and qualification of a new lightweight and compact Antenna Pointing Mechanism (APM). The APM was specially designed to meet the stringent mass, envelope, and environmental requirements of OFFEQ experimental satellite. During the development phase, some problems were encountered with the brushless DC motors, slip ring contact resistance, and bearing drag torque. All of these problems were resolved, and two APM units have been operating successfully in orbit since April, 1995.

An introduction to the physics of high energy accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, D.A.; Syphers, J.J.

1993-01-01

This book is an outgrowth of a course given by the authors at various universities and particle accelerator schools. It starts from the basic physics principles governing particle motion inside an accelerator, and leads to a full description of the complicated phenomena and analytical tools encountered in the design and operation of a working accelerator. The book covers acceleration and longitudinal beam dynamics, transverse motion and nonlinear perturbations, intensity dependent effects, emittance preservation methods and synchrotron radiation. These subjects encompass the core concerns of a high energy synchrotron. The authors apparently do not assume the reader has much previous knowledgemore » about accelerator physics. Hence, they take great care to introduce the physical phenomena encountered and the concepts used to describe them. The mathematical formulae and derivations are deliberately kept at a level suitable for beginners. After mastering this course, any interested reader will not find it difficult to follow subjects of more current interests. Useful homework problems are provided at the end of each chapter. Many of the problems are based on actual activities associated with the design and operation of existing accelerators.« less

NOTES: a review of the technical problems encountered and their solutions.

PubMed

Mintz, Yoav; Horgan, Santiago; Cullen, John; Stuart, David; Falor, Eric; Talamini, Mark A

2008-08-01

Natural orifice translumenal endoscopic surgery (NOTES) is currently investigated and developed worldwide. In the past few years, multiple groups have confronted this challenge. Many technical problems are encountered in this technique due to the currently available tools for this approach. Some of the unique technical problems in NOTES include: blindly performed primary incisions; uncontrolled pneumoperitoneal pressure; no support for the endoscope in the abdominal cavity; inadequate vision; insufficient illumination; limited retraction and exposure; and the complexity of suturing and performing a safe anastomosis. In this paper, we review the problems encountered in NOTES and provide possible temporary solutions. Acute and survival studies were performed on 15 farm pigs. The hybrid technique approach (i.e., endoscopic surgery with the aid of laparoscopic vision) was performed in all cases. Procedures performed included liver biopsies, bilateral tubal ligation, oophprectomy, cholecystectomy, splenectomy and small bowel resection, and anastomosis. All attempted procedures were successfully performed. New methods and techniques were developed to overcome the technical problems. Closure of the gastrotomy was achieved by T-bar sutures and by stapler closure of the stomach incision. Small bowel anastomosis was achieved by the dual-lumen NOTES technique. The hybrid technique serves as a temporary approach to aid in developing the NOTES technique. A rectal or vaginal port of entry enables and facilitates gastrointestinal NOTES by using available laparoscopic instruments. The common operations performed today in the laparoscopic fashion could be probably performed in the NOTES approach. The safety of these procedures, however, is yet to be determined.

Problems Encountered by Religious Vocational Secondary School and Other Secondary School Students in Physical Education and Sports Activities

ERIC Educational Resources Information Center

Bar, Mustafa; Yaman, Menzure Sibel; Hergüner, Gülten

2016-01-01

The study aimed to determine problems encountered by Religious Vocational Secondary School and other Secondary School students in physical education and sports activities and to compare these problems according to school type and gender. A questionnaire named "Problems encountered in attending to physical education and sports activities"…

Launch and Early Orbit Operations for CryoSat-2

NASA Astrophysics Data System (ADS)

Mardel, Nic; Marchese, Franco

2010-12-01

CryoSat-2 was launched from Baikonur on 8th of April 2010 aboard a modified Dnepr ICBM, the so-called SS18 Satan. Following the ascent and separation from the launch vehicle the Flight Operations Segment (FOS) in ESOC, Darmstadt started the operations to configure the satellite into the correct mode to acquire science; switching on units, configuring software and ensuring that the satellite health and performance was as expected. This paper will describe the operations performed by the FOS during the first weeks in orbit, including the unexpected problems encountered, their implications and solutions.

Exact solution for an optimal impermeable parachute problem

NASA Astrophysics Data System (ADS)

Lupu, Mircea; Scheiber, Ernest

2002-10-01

In the paper there are solved direct and inverse boundary problems and analytical solutions are obtained for optimization problems in the case of some nonlinear integral operators. It is modeled the plane potential flow of an inviscid, incompressible and nonlimited fluid jet, witch encounters a symmetrical, curvilinear obstacle--the deflector of maximal drag. There are derived integral singular equations, for direct and inverse problems and the movement in the auxiliary canonical half-plane is obtained. Next, the optimization problem is solved in an analytical manner. The design of the optimal airfoil is performed and finally, numerical computations concerning the drag coefficient and other geometrical and aerodynamical parameters are carried out. This model corresponds to the Helmholtz impermeable parachute problem.

Children learn spurious associations in their math textbooks: Examples from fraction arithmetic.

PubMed

Braithwaite, David W; Siegler, Robert S

2018-04-26

Fraction arithmetic is among the most important and difficult topics children encounter in elementary and middle school mathematics. Braithwaite, Pyke, and Siegler (2017) hypothesized that difficulties learning fraction arithmetic often reflect reliance on associative knowledge-rather than understanding of mathematical concepts and procedures-to guide choices of solution strategies. They further proposed that this associative knowledge reflects distributional characteristics of the fraction arithmetic problems children encounter. To test these hypotheses, we examined textbooks and middle school children in the United States (Experiments 1 and 2) and China (Experiment 3). We asked the children to predict which arithmetic operation would accompany a specified pair of operands, to generate operands to accompany a specified arithmetic operation, and to match operands and operations. In both countries, children's responses indicated that they associated operand pairs having equal denominators with addition and subtraction, and operand pairs having a whole number and a fraction with multiplication and division. The children's associations paralleled the textbook input in both countries, which was consistent with the hypothesis that children learned the associations from the practice problems. Differences in the effects of such associative knowledge on U.S. and Chinese children's fraction arithmetic performance are discussed, as are implications of these differences for educational practice. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

A problem of collision avoidance

NASA Technical Reports Server (NTRS)

Vincent, T. L.; Cliff, E. M.; Grantham, W. J.; Peng, W. Y.

1972-01-01

Collision avoidance between two vehicles of constant speed with limited turning radii, moving in a horizontal plane is investigated. Collision avoidance is viewed as a game by assuming that the operator of one vehicle has perfect knowledge of the state of the other, whereas the operator of the second vehicle is unaware of any impending danger. The situation envisioned is that of an encounter between a commercial aircraft and a small light aircraft. This worse case situation is examined to determine the conditions under which the commercial aircraft should execute a collision avoidance maneuver. Three different zones of vulnerability are defined and the boundaries, or barriers, between these zones are determined for a typical aircraft encounter. A discussion of the methods used to obtain the results as well as some of the salient features associated with the resultant barriers is included.

Object motion analysis study

NASA Technical Reports Server (NTRS)

1974-01-01

The use of optical data processing (ODP) techniques for motion analysis in two-dimensional imagery was studied. The basic feasibility of this approach was demonstrated, but inconsistent performance of the photoplastic used for recording spatial filters prevented totally automatic operation. Promising solutions to the problems encountered are discussed, and it is concluded that ODP techniques could be quite useful for motion analysis.

Solar heating and cooling system design and development

NASA Technical Reports Server (NTRS)

1979-01-01

The design and development of marketable solar heating and cooling systems for single family and commercial applications is described. The delivery, installation, and monitoring of the prototype systems are discussed. Seven operational test sites are discussed in terms of system performance. Problems encountered with equipment and installation were usually due to lack of skills required for solar system installation.

Solar heating and hot water system installed at Alderson Broaddus College, Philippi, West Virginia

NASA Technical Reports Server (NTRS)

1981-01-01

Data needed necessary to evaluate the design and operation of a solar energy heating and hot water system installed in a commercial application are presented. The information includes system descriptions, acceptance test data, schematics, as built drawing, problems encountered, all solutions and photographs of the system at various stages of completion.

The Problems Encountered in a CTEV Clinic: Can Better Casting and Bracing Be Accomplished?

PubMed

Agarwal, Anil; Kumar, Anubrat; Shaharyar, Abbas; Mishra, Madhusudan

2016-09-07

The aim of the study is to create awareness in the practicing health care workers toward the problems encountered during casting and bracing of clubfoot following Ponseti method, and in turn avoid them. Retrospective audit of 6 years' clubfoot clinic records to analyze problems associated with Ponseti method. Problems were encountered in 26 cast and in 6 braced patients. Just 4 patients out of 71 syndromic (5.6%) experienced problems during casting compared with 3% overall incidence. The common problems encountered in casted patients were moisture lesions, hematoma, dermatitis due to occlusion, pressure sores, and fractures. There was excessive bleeding in 1 patient at time of tenotomy. In braced patients, pressure sores and tenderness at tenotomy site were major problems. None of the syndromic patients experienced difficulties during bracing. Problems were encountered with Ponseti method during casting, tenotomy, or bracing. Syndromic children had lesser complication rate than idiopathic clubfeet. It is important to be aware of these problems so that appropriate intervention can be done early. Level IV: Retrospective. © 2016 The Author(s).

MSFC Skylab electrical power systems mission evaluation

NASA Technical Reports Server (NTRS)

Woosley, A. P.

1974-01-01

The design, development, and operation of the Skylab electrical power system are discussed. The electrical systems for the airlock module of the orbital workshop and the Apollo telescope mount are described. Skylab is considered an integral laboratory, however, both cluster and module hardware distinct sections are included. Significant concept and requirement evolution, testing, and modifications resulting from tests are briefly summarized to aid in understanding the launch configuration description and the procedures and performance discussed for in-orbit operation. Specific problems encountered during Skylab orbital missions are analyzed.

Design criteria of the bolometer diagnostic for steady-state operation of the W7-X stellaratora)

NASA Astrophysics Data System (ADS)

Zhang, D.; Burhenn, R.; Koenig, R.; Giannone, L.; Grodzki, P. A.; Klein, B.; Grosser, K.; Baldzuhn, J.; Ewert, K.; Erckmann, V.; Hirsch, M.; Laqua, H. P.; Oosterbeek, J. W.

2010-10-01

A bolometric diagnostic system with features necessary for steady-state operation in the superconducting stellarator W7-X was designed. During a pulse length of 1800 s with an ECRH (electron cyclotron resonance heating) power of 10 MW, the components suffer not only from a large thermal load but also from stray radiation of the nonabsorbed isotropic microwaves. This paper gives an overview of the technical problems encountered during the design work and the solutions to individual problems to meet the special requirements in W7-X, e.g., component thermal protection, detector offset thermal drift suppression, as well as a microwave shielding technique.

Comments on some of the drilling and completion problems in Cerro Prieto geothermal wells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dominguez A, B.; Sanchez G, G.

From 1960 to the present, 85 wells with a total drilling length exceeding 160,000 m have been constructed at Cerro Prieto, a modest figure compared to an oil field. This activity took place in five stages, each characterized by changes and modifications required by various drilling and well-completion problems. Initially, the technical procedures followed were similar to those used in the oil industry. However, several problems emerged as a result of the relatively high temperatures found in the geothermal reservoir. The various problems that have been encountered can be considered to be related to drilling fluids, cements and cementing operations,more » lithology, geothermal fluid characteristics, and casings and their accessories. As the importance of high temperatures and the characteristics of the geothermal reservoir fluids were better understood, the criteria were modified to optimize well-completion operations, and satisfactory results have been achieved to date.« less

[Survey on drug-related problems in Lithuania's pharmacies].

PubMed

Kubiliene, Loreta; Liukenskyte, Simona; Savickas, Arūnas; Jureniene, Kristina

2006-01-01

to survey the most common and the most important drug-related problems in Lithuania, to explore their solution and factors influencing it, to formulate recommendations for solving drug-related problems. Pharmacists from community pharmacies participated in a random survey. They filled in questionnaires about drug-related problems and their solutions. It was the first survey on drug-related problems ever carried out in Lithuania. For the first time, it was found out that in Lithuania pharmacists most commonly encountered drug-related problem--additional drug therapy (52.03% of respondents)--and most rarely encountered drug-related problem--dosage too high (3% of respondents). Pharmacists stated that all categories of drug-related problems were of equal importance. It was established that pharmacists commonly solved drug-related problems associated with noncompliance with instructions (72.5% of respondents) and rarely met the problem when improper drug was selected (39.56% of respondents). Patients taking prescription medicines commonly encounter additional drug therapy problem, and patients taking nonprescription medications commonly encounter problems related to noncompliance with instructions.

A novel approach in formulation of special transition elements: Mesh interface elements

NASA Technical Reports Server (NTRS)

Sarigul, Nesrin

1991-01-01

The objective of this research program is in the development of more accurate and efficient methods for solution of singular problems encountered in various branches of mechanics. The research program can be categorized under three levels. The first two levels involve the formulation of a new class of elements called 'mesh interface elements' (MIE) to connect meshes of traditional elements either in three dimensions or in three and two dimensions. The finite element formulations are based on boolean sum and blending operators. MEI are being formulated and tested in this research to account for the steep gradients encountered in aircraft and space structure applications. At present, the heat transfer and structural analysis problems are being formulated from uncoupled theory point of view. The status report: (1) summarizes formulation for heat transfer and structural analysis; (2) explains formulation of MEI; (3) examines computational efficiency; and (4) shows verification examples.

Data Visualization of Invisible Airflow Hazards During Helicopter Takeoff and Landing Operations

NASA Technical Reports Server (NTRS)

Aragon, Cecilia R.

2004-01-01

Many aircraft accidents each year are caused by encounters with unseen airflow hazards near the ground such as vortices, downdrafts, wind shear, microbursts, or other turbulence. While such hazards frequently pose problems to fixed-wing airplanes, they are especially dangerous to helicopters, which often have to operate in confined spaces and under operationally stressful conditions. We are developing flight-deck visualizations of airflow hazards during helicopter takeoff and landing operations, and are evaluating their effectiveness with usability studies. Our hope is.that this work will lead to the production of an airflow hazard detection system for pilots that will save lives.

Composite overwrapped metallic tanks

NASA Technical Reports Server (NTRS)

Caudill, C. L.; Kirlin, R. L.

1972-01-01

Work is reported for fabricating and testing the fiberglass overwrapped titanium pressure vessel for cryogenic service. Difficulties encountered in the tank liner fabrication phase involved explosive forming, vacuum annealing, chemical milling and electron beam welding. While each of these processes and the nondestructive test methods employed are normally considered to be individually reliable, the combination of poor material together with fabrication and development reversals prevented the full achievement of the desired end results. Eight tanks plus a prototype and tool proofing article were produced. Six of the vessels failed during the hydrostatic sizing operation. One of the remaining tanks was hydrostatically pressurized to burst and the other was pressurized repeatedly at 75 F from 100 psi to the operating pressure until failure occurred. As a result, it is not possible to draw firm conclusions as to the true value of the design concept due to the problems encountered in the program.

Investigation Concerning the Modification of the University of Illinois Computerized Serials Book Catalog to Achieve an Operative System at the University of Colorado Libraries.

ERIC Educational Resources Information Center

Dougherty, Richard M.; Stephens, James G.

The objectives of the study were to record: (1) the problems encountered in interpreting and using the Illinois program documentation; (2) the modifications required to reconcile system incompatibilities and inefficiencies due to different computer configurations; (3) the input instruction modifications made to accommodate local library processing…

Team play with a powerful and independent agent: operational experiences and automation surprises on the Airbus A-320.

PubMed

Sarter, N B; Woods, D D

1997-12-01

Research and operational experience have shown that one of the major problems with pilot-automation interaction is a lack of mode awareness (i.e., the current and future status and behavior of the automation). As a result, pilots sometimes experience so-called automation surprises when the automation takes an unexpected action or fails to behave as anticipated. A lack of mode awareness and automation surprises can he viewed as symptoms of a mismatch between human and machine properties and capabilities. Changes in automation design can therefore he expected to affect the likelihood and nature of problems encountered by pilots. Previous studies have focused exclusively on early generation "glass cockpit" aircraft that were designed based on a similar automation philosophy. To find out whether similar difficulties with maintaining mode awareness are encountered on more advanced aircraft, a corpus of automation surprises was gathered from pilots of the Airbus A-320, an aircraft characterized by high levels of autonomy, authority, and complexity. To understand the underlying reasons for reported breakdowns in human-automation coordination, we also asked pilots about their monitoring strategies and their experiences with and attitude toward the unique design of flight controls on this aircraft.

Team play with a powerful and independent agent: operational experiences and automation surprises on the Airbus A-320

NASA Technical Reports Server (NTRS)

Sarter, N. B.; Woods, D. D.

1997-01-01

Research and operational experience have shown that one of the major problems with pilot-automation interaction is a lack of mode awareness (i.e., the current and future status and behavior of the automation). As a result, pilots sometimes experience so-called automation surprises when the automation takes an unexpected action or fails to behave as anticipated. A lack of mode awareness and automation surprises can he viewed as symptoms of a mismatch between human and machine properties and capabilities. Changes in automation design can therefore he expected to affect the likelihood and nature of problems encountered by pilots. Previous studies have focused exclusively on early generation "glass cockpit" aircraft that were designed based on a similar automation philosophy. To find out whether similar difficulties with maintaining mode awareness are encountered on more advanced aircraft, a corpus of automation surprises was gathered from pilots of the Airbus A-320, an aircraft characterized by high levels of autonomy, authority, and complexity. To understand the underlying reasons for reported breakdowns in human-automation coordination, we also asked pilots about their monitoring strategies and their experiences with and attitude toward the unique design of flight controls on this aircraft.

Lessons Learned From the Development, Operation, and Review of Mechanical Systems on the Space Shuttle, International Space Station, and Payloads

NASA Technical Reports Server (NTRS)

Dinsel, Alison; Jermstad, Wayne; Robertson, Brandan

2006-01-01

The Mechanical Design and Analysis Branch at the Johnson Space Center (JSC) is responsible for the technical oversight of over 30 mechanical systems flying on the Space Shuttle Orbiter and the International Space Station (ISS). The branch also has the responsibility for reviewing all mechanical systems on all Space Shuttle and International Space Station payloads, as part of the payload safety review process, through the Mechanical Systems Working Group (MSWG). These responsibilities give the branch unique insight into a large number of mechanical systems, and problems encountered during their design, testing, and operation. This paper contains narrative descriptions of lessons learned from some of the major problems worked on by the branch during the last two years. The problems are grouped into common categories and lessons learned are stated.

Simulation of Martian EVA at the Mars Society Arctic Research Station

NASA Astrophysics Data System (ADS)

Pletser, V.; Zubrin, R.; Quinn, K.

The Mars Society has established a Mars Arctic Research Station (M.A.R.S.) on Devon Island, North of Canada, in the middle of the Haughton crater formed by the impact of a large meteorite several million years ago. The site was selected for its similarities with the surface of the Mars planet. During the Summer 2001, the MARS Flashline Research Station supported an extended international simulation campaign of human Mars exploration operations. Six rotations of six person crews spent up to ten days each at the MARS Flashline Research Station. International crews, of mixed gender and professional qualifications, conducted various tasks as a Martian crew would do and performed scientific experiments in several fields (Geophysics, Biology, Psychology). One of the goals of this simulation campaign was to assess the operational and technical feasibility of sustaining a crew in an autonomous habitat, conducting a field scientific research program. Operations were conducted as they would be during a Martian mission, including Extra-Vehicular Activities (EVA) with specially designed unpressurized suits. The second rotation crew conducted seven simulated EVAs for a total of 17 hours, including motorized EVAs with All Terrain Vehicles, to perform field scientific experiments in Biology and Geophysics. Some EVAs were highly successful. For some others, several problems were encountered related to hardware technical failures and to bad weather conditions. The paper will present the experiment programme conducted at the Mars Flashline Research Station, the problems encountered and the lessons learned from an EVA operational point of view. Suggestions to improve foreseen Martian EVA operations will be discussed.

The use of twin-screen-based WIMPS in spacecraft control

NASA Astrophysics Data System (ADS)

Klim, R. D.

1990-10-01

The ergonomic problems of designing a sophisticated Windows Icons Mouse Pop-up (WIMP) based twin screen workstation are outlined. These same problems will be encountered by future spacecraft controllers. The design of a modern, advanced workstation for use on a distributed multicontrol center in a multisatellite control system is outlined. The system uses access control mechanisms to ensure that only authorized personnel can undertake certain operations on the workstation. Rules governing the use of windowing features, screen attributes, icons, keyboard and mouse in spacecraft control are discussed.

Content-addressable read/write memories for image analysis

NASA Technical Reports Server (NTRS)

Snyder, W. E.; Savage, C. D.

1982-01-01

The commonly encountered image analysis problems of region labeling and clustering are found to be cases of search-and-rename problem which can be solved in parallel by a system architecture that is inherently suitable for VLSI implementation. This architecture is a novel form of content-addressable memory (CAM) which provides parallel search and update functions, allowing speed reductions down to constant time per operation. It has been proposed in related investigations by Hall (1981) that, with VLSI, CAM-based structures with enhanced instruction sets for general purpose processing will be feasible.

Problems encountered with conventional fiber-reinforced composites

NASA Technical Reports Server (NTRS)

Landel, R. F.

1981-01-01

Preparational, computational, and operational problems associated with fiber-reinforced composites (FRC) are reviewed. Initial preparation of FRCs is shown to involve consideration of the type of prepreg, the setting time, cure conditions and cycles, and cure temperatures. The effects of the choice of bonding agents, the fiber transfer length, and individual fiber responses to bonding agents are noted to have an impact on fiber strength, moisture uptake, and fatigue resistance. The deformation prior to failure and the failure region are modeled through models of mini-, micro- and macro mechanics formulations employing a stiffness matrix, failure criterion, or fracture mechanics. The detection, evaluation, and repair of defects comprises the operational domain, and it is stressed that no good repair techniques exist for FRCs.

Students’ Mathematical Literacy in Solving PISA Problems Based on Keirsey Personality Theory

NASA Astrophysics Data System (ADS)

Masriyah; Firmansyah, M. H.

2018-01-01

This research is descriptive-qualitative research. The purpose is to describe students’ mathematical literacy in solving PISA on space and shape content based on Keirsey personality theory. The subjects are four junior high school students grade eight with guardian, artisan, rational or idealist personality. Data collecting methods used test and interview. Data of Keirsey Personality test, PISA test, and interview were analysed. Profile of mathematical literacy of each subject are described as follows. In formulating, guardian subject identified mathematical aspects are formula of rectangle area and sides length; significant variables are terms/conditions in problem and formula of ever encountered question; translated into mathematical language those are measurement and arithmetic operations. In employing, he devised and implemented strategies using ease of calculation on area-subtraction principle; declared truth of result but the reason was less correct; didn’t use and switch between different representations. In interpreting, he declared result as area of house floor; declared reasonableness according measurement estimation. In formulating, artisan subject identified mathematical aspects are plane and sides length; significant variables are solution procedure on both of daily problem and ever encountered question; translated into mathematical language those are measurement, variables, and arithmetic operations as well as symbol representation. In employing, he devised and implemented strategies using two design comparison; declared truth of result without reason; used symbol representation only. In interpreting, he expressed result as floor area of house; declared reasonableness according measurement estimation. In formulating, rational subject identified mathematical aspects are scale and sides length; significant variables are solution strategy on ever encountered question; translated into mathematical language those are measurement, variable, arithmetic operation as well as symbol and graphic representation. In employing, he devised and implemented strategies using additional plane forming on area-subtraction principle; declared truth of result according calculation process; used and switched between symbol and graphic representation. In interpreting, he declared result as house area within terrace and wall; declared reasonableness according measurement estimation. In formulating, idealist subject identified mathematical aspects are sides length; significant variables are terms/condition in problem; translated into mathematical language those are measurement, variables, arithmetic operations as well as symbol and graphic representation. In employing, he devised and implemented strategies using trial and error and two design in process of finding solutions; declared truth of result according the use of two design of solution; used and switched between symbol and graphic representation. In interpreting, he declared result as floor area of house; declared reasonableness according measurement estimation.

DOE/NASA Mod-0 100KW wind turbine test results

NASA Technical Reports Server (NTRS)

Glasgow, J. C.

1978-01-01

The Wind Turbine demonstrates the capability of automatic unattended operation, including startup, achieving synchronism, and shutdown as dictated by wind conditions. During the course of these operations, a wealth of engineering data was generated. Some of the data which is associated with rotor and machine dynamics problems encountered, and the machine modifications incorporated as a solution are presented. These include high blade loads due to tower shadow, excessive nacelle yawing motion, and power oscillations. The results of efforts to correlate measured wind velocity with power output and wind turbine loads are also discussed.

Design of Mariner 9 Science Sequences using Interactive Graphics Software

NASA Technical Reports Server (NTRS)

Freeman, J. E.; Sturms, F. M, Jr.; Webb, W. A.

1973-01-01

This paper discusses the analyst/computer system used to design the daily science sequences required to carry out the desired Mariner 9 science plan. The Mariner 9 computer environment, the development and capabilities of the science sequence design software, and the techniques followed in the daily mission operations are discussed. Included is a discussion of the overall mission operations organization and the individual components which played an essential role in the sequence design process. A summary of actual sequences processed, a discussion of problems encountered, and recommendations for future applications are given.

Tribally Controlled Community College Assistance Act of 1978, Public Law 95-471. Fiscal Year 1980 Report to the Congress of the United States of America.

ERIC Educational Resources Information Center

1982

During the first year of operation under the Act, major problems encountered focused on: (1) defining the terms "full time equivalent" (FTE) student for purposes of per capita financial support to approved institutions; (2) the planning, conduct, and analyses of feasibility studies to better specify the constituent population and their…

Kerberos authentication: The security answer for unsecured networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engert, D.E.

1995-06-01

Traditional authentication schemes do not properly address the problems encountered with today`s unsecured networks. Kerbmm developed by MIT, on the other hand is designed to operate in an open unsecured network, yet provide good authentication and security including encrypted session traffic. Basic Kerberos principles as well as experiences of the ESnet Authentication Pilot Project with Cross Realm. Authentication between four National Laboratories will also be described.

How To Use the Spreadsheet as a Tool in the Secondary School Mathematics Classroom. Second Edition (for Windows and Macintosh Operating Systems).

ERIC Educational Resources Information Center

Masalski, William J.

This book seeks to develop, enhance, and expand students' understanding of mathematics by using technology. Topics covered include the advantages of spreadsheets along with the opportunity to explore the 'what if?' type of questions encountered in the problem-solving process, enhancing the user's insight into the development and use of algorithms,…

CHD associated with syndromic diagnoses: peri-operative risk factors and early outcomes

PubMed Central

Landis, Benjamin J.; Cooper, David S.; Hinton, Robert B.

2016-01-01

CHD is frequently associated with a genetic syndrome. These syndromes often present specific cardiovascular and non-cardiovascular co-morbidities that confer significant peri-operative risks affecting multiple organ systems. Although surgical outcomes have improved over time, these co-morbidities continue to contribute substantially to poor peri-operative mortality and morbidity outcomes. Peri-operative morbidity may have long-standing ramifications on neurodevelopment and overall health. Recognising the cardiovascular and non-cardiovascular risks associated with specific syndromic diagnoses will facilitate expectant management, early detection of clinical problems, and improved outcomes – for example, the development of syndrome-based protocols for peri-operative evaluation and prophylactic actions may improve outcomes for the more frequently encountered syndromes such as 22q11 deletion syndrome. PMID:26345374

Survey on effect of surface winds on aircraft design and operation and recommendations for needed wind research

NASA Technical Reports Server (NTRS)

Houbolt, J. C.

1973-01-01

A survey of the effect of environmental surface winds and gusts on aircraft design and operation is presented. A listing of the very large number of problems that are encountered is given. Attention is called to the many studies that have been made on surface winds and gusts, but development in the engineering application of these results to aeronautical problems is pointed out to be still in the embryonic stage. Control of the aircraft is of paramount concern. Mathematical models and their application in simulation studies of airplane operation and control are discussed, and an attempt is made to identify their main gaps or deficiencies. Key reference material is cited. The need for better exchange between the meteorologist and the aeronautical engineer is discussed. Suggestions for improvements in the wind and gust models are made.

Top-up operation at Pohang Light Source-II

NASA Astrophysics Data System (ADS)

Hwang, I.; Huang, J. Y.; Kim, M.; Lee, B.-J.; Kim, C.; Choi, J.-Y.; Kim, M.-H.; Lee, H. S.; Moon, D.; Lee, E. H.; Kim, D.-E.; Nam, S. H.; Shin, S.; Cho, Moohyun

2014-05-01

After three years of upgrading work, PLS-II (S. Shin, Commissioning of the PLS-II, JINST, January 2013) is now successfully operating. The top-up operation of the 3 GeV linear accelerator had to be delayed because of some challenges encountered, and PLS-II was run in decay mode at the beginning in March 2012. The main difficulties encountered in the top-up operation of PLS-II are different levels between the linear accelerator and the storage ring, the 14 narrow gap in-vacuum undulators in operation, and the full energy injection by 3 GeV linear accelerator. Large vertical emittance and energy jitter of the linac were the major obstacles that called for careful control of injected beam to reduce beam loss in the storage ring during injection. The following measures were taken to resolve these problems: (1) The high resolution Libera BPM (see http://www.i-tech.si) was implemented to measure the beam trajectory and energy. (2) Three slit systems were installed to filter the beam edge. (3) De-Qing circuit was applied to the modulator system to improve the energy stability of injected beam. As a result, the radiation by beam loss during injection is reduced drastically, and the top-up mode has been successfully operating since 19th March 2013. In this paper, we describe the experimental results of the PLS-II top-up operation and the improvement plan.

Can modeling of HIV treatment processes improve outcomes? Capitalizing on an operations research approach to the global pandemic

PubMed Central

Xiong, Wei; Hupert, Nathaniel; Hollingsworth, Eric B; O'Brien, Megan E; Fast, Jessica; Rodriguez, William R

2008-01-01

Background Mathematical modeling has been applied to a range of policy-level decisions on resource allocation for HIV care and treatment. We describe the application of classic operations research (OR) techniques to address logistical and resource management challenges in HIV treatment scale-up activities in resource-limited countries. Methods We review and categorize several of the major logistical and operational problems encountered over the last decade in the global scale-up of HIV care and antiretroviral treatment for people with AIDS. While there are unique features of HIV care and treatment that pose significant challenges to effective modeling and service improvement, we identify several analogous OR-based solutions that have been developed in the service, industrial, and health sectors. Results HIV treatment scale-up includes many processes that are amenable to mathematical and simulation modeling, including forecasting future demand for services; locating and sizing facilities for maximal efficiency; and determining optimal staffing levels at clinical centers. Optimization of clinical and logistical processes through modeling may improve outcomes, but successful OR-based interventions will require contextualization of response strategies, including appreciation of both existing health care systems and limitations in local health workforces. Conclusion The modeling techniques developed in the engineering field of operations research have wide potential application to the variety of logistical problems encountered in HIV treatment scale-up in resource-limited settings. Increasing the number of cross-disciplinary collaborations between engineering and public health will help speed the appropriate development and application of these tools. PMID:18680594

Urological considerations in space medicine.

NASA Technical Reports Server (NTRS)

Cockett, A. T. K.; Adey, W. R.; Roberts, A. P.

1972-01-01

Urological problems encountered during the preparation phases of Biosatellite III, flight of Bonny the Space Monkey, are detailed. The solution to each problem is detailed. The catheter system employed, antibiotic coverage used, and bacteria encountered in the urine of the five animals are detailed. Urinary calcium levels in three ground based animals are illustrated. Testicular alterations encountered in all animals are mentioned. It is concluded that space flights of duration beyond nine days may present serious problems of a urological nature.

Using Three-Dimensional Printing to Fabricate a Tubing Connector for Dilation and Evacuation.

PubMed

Stitely, Michael L; Paterson, Helen

2016-02-01

This is a proof-of-concept study to show that simple instrumentation problems encountered in surgery can be solved by fabricating devices using a three-dimensional printer. The device used in the study is a simple tubing connector fashioned to connect two segments of suction tubing used in a surgical procedure where no commercially available product for this use is available through our usual suppliers in New Zealand. A cylindrical tubing connector was designed using three-dimensional printing design software. The tubing connector was fabricated using the Makerbot Replicator 2X three-dimensional printer. The connector was used in 15 second-trimester dilation and evacuation procedures. Data forms were completed by the primary operating surgeon. Descriptive statistics were used with the expectation that the device would function as intended in all cases. The three-dimensional printed tubing connector functioned as intended in all 15 instances. Commercially available three-dimensional printing technology can be used to overcome simple instrumentation problems encountered during gynecologic surgical procedures.

USSR Report, Transportation

DTIC Science & Technology

1984-12-21

During the years of gas- turbine engines, aviators encountered quite a few problems. Bearings in these engines were wearing out in 200 to 400 hours...and the time between overhaul of the GTD [gas- turbine engines] of that time de- pended precisely on their operation. Today bearings in aviation last...with vertical corrugating. The transverse bulkheads between holds Nos 2-4 also have vertical corrugating. The hull has been framed according to a

Diabetes in pregnancy.

PubMed

Spearing, G J

1977-10-01

Diabetes, while at one time a rarity in pregnancy, is now one of the more common medical problems encountered by the obstetrician. Immaculate control is essential and can only be accomplished by close co-operation between the patient and all her medical attendants. The patient can then anticipate an almost trouble free pregnancy and should deliver a baby of normal weight with none of the usual stigmata associated with babies of diabetic mothers.

Oxygen Transport to Human Tissues.

DTIC Science & Technology

1981-06-01

mountain climbing. Then Dr. Luft’s scientific curiosity turned to the problems encountered by the military fliers. The effect(s) of hypoxia, decompression...instantaneous hypoxia in man. J. .4ppl. Phiwil. 8:444-454. Gioddard. R.F. and U.C.L. Intermittent positive pressure-aerosol therapy in pediatrics . Di...mood and the accompanying realization by many that the conceptual and technical advances associated with military operations in the United States and

Underwater disaster victim identification: the process and the problems.

PubMed

Winskog, Calle

2012-06-01

An underwater disaster may involve a crime scene investigation which should be handled as if it were located above water and include a detailed description and documentation of items, belongings and findings. The environment, however, creates special circumstances, each with specific problems that are not encountered during land investigations. Risks associated with underwater recovery cannot be overestimated and underwater disaster recovery diving should not be performed without special training and careful pre-dive planning. Handling of cadavers in an underwater recovery operation also requires special training and a systematic approach to victim recovery. Environmental circumstances, local judicial requirements, religious and cultural issues and the scope of the disaster are only some of the factors that have to be considered before commencing any aquatic disaster victim recovery operation.

Identification and Management of Information Problems by Emergency Department Staff

PubMed Central

Murphy, Alison R.; Reddy, Madhu C.

2014-01-01

Patient-care teams frequently encounter information problems during their daily activities. These information problems include wrong, outdated, conflicting, incomplete, or missing information. Information problems can negatively impact the patient-care workflow, lead to misunderstandings about patient information, and potentially lead to medical errors. Existing research focuses on understanding the cause of these information problems and the impact that they can have on the hospital’s workflow. However, there is limited research on how patient-care teams currently identify and manage information problems that they encounter during their work. Through qualitative observations and interviews in an emergency department (ED), we identified the types of information problems encountered by ED staff, and examined how they identified and managed the information problems. We also discuss the impact that these information problems can have on the patient-care teams, including the cascading effects of information problems on workflow and the ambiguous accountability for fixing information problems within collaborative teams. PMID:25954457

Navigation errors encountered using weather-mapping radar for helicopter IFR guidance to oil rigs

NASA Technical Reports Server (NTRS)

Phillips, J. D.; Bull, J. S.; Hegarty, D. M.; Dugan, D. C.

1980-01-01

In 1978 a joint NASA-FAA helicopter flight test was conducted to examine the use of weather-mapping radar for IFR guidance during landing approaches to oil rig helipads. The following navigation errors were measured: total system error, radar-range error, radar-bearing error, and flight technical error. Three problem areas were identified: (1) operational problems leading to pilot blunders, (2) poor navigation to the downwind final approach point, and (3) pure homing on final approach. Analysis of these problem areas suggests improvement in the radar equipment, approach procedure, and pilot training, and gives valuable insight into the development of future navigation aids to serve the off-shore oil industry.

General aviation avionics equipment maintenance

NASA Technical Reports Server (NTRS)

Parker, C. D.; Tommerdahl, J. B.

1978-01-01

Maintenance of general aviation avionics equipment was investigated with emphasis on single engine and light twin engine general aviation aircraft. Factors considered include the regulatory agencies, avionics manufacturers, avionics repair stations, the statistical character of the general aviation community, and owners and operators. The maintenance, environment, and performance, repair costs, and reliability of avionics were defined. It is concluded that a significant economic stratification is reflected in the maintenance problems encountered, that careful attention to installations and use practices can have a very positive impact on maintenance problems, and that new technologies and a general growth in general aviation will impact maintenance.

Fluid Dynamics Problems of Vehicles Operating Near or in the Air-Sea Interface (Problemes de Dynamique des Fluides des Vehicules Evoluant dans ou pres de L’interface Air-Mer).

DTIC Science & Technology

1999-02-01

articulated rotor systems, the rotor blade can deflect several feet and contact the fuselage of the helicopter, resulting in a "tunnel strike " in...tandem rotor configurations; or the tailboom, resulting in a "tailboom strike " in single rotor configurations. The H-46 Sea Knight, a tandem rotor...helicopter used by the U.S. Navy and Marines, has encountered over 100 tunnel strikes since 1964 and still occasionally experiences them. Most tunnel

Air National Guard Fighters the Total Force (Maxwell Paper, Number 1)

DTIC Science & Technology

1996-05-01

child abuse cases, 9 percent rise in spousal abuse reports, and an 11 percent rise in alcohol abuse. While these figures represent only one fighter wing, they highlight some of the potential problems that may be encountered by other active duty units as they too struggle under an ever increasing workload. These problems and a growing belief that long-term readiness may soon suffer if the workload is not reduced, convinced Defense Secretary William Perry to direct a greater role for the Air National Guard in peacetime contingency operations. The Air National Guard is no

Lessons Learned During Solutions of Multidisciplinary Design Optimization Problems

NASA Technical Reports Server (NTRS)

Patnaik, Suna N.; Coroneos, Rula M.; Hopkins, Dale A.; Lavelle, Thomas M.

2000-01-01

Optimization research at NASA Glenn Research Center has addressed the design of structures, aircraft and airbreathing propulsion engines. During solution of the multidisciplinary problems several issues were encountered. This paper lists four issues and discusses the strategies adapted for their resolution: (1) The optimization process can lead to an inefficient local solution. This deficiency was encountered during design of an engine component. The limitation was overcome through an augmentation of animation into optimization. (2) Optimum solutions obtained were infeasible for aircraft and air-breathing propulsion engine problems. Alleviation of this deficiency required a cascading of multiple algorithms. (3) Profile optimization of a beam produced an irregular shape. Engineering intuition restored the regular shape for the beam. (4) The solution obtained for a cylindrical shell by a subproblem strategy converged to a design that can be difficult to manufacture. Resolution of this issue remains a challenge. The issues and resolutions are illustrated through six problems: (1) design of an engine component, (2) synthesis of a subsonic aircraft, (3) operation optimization of a supersonic engine, (4) design of a wave-rotor-topping device, (5) profile optimization of a cantilever beam, and (6) design of a cvlindrical shell. The combined effort of designers and researchers can bring the optimization method from academia to industry.

Problems Encountered during the Scientific Research Process in Graduate Education: The Institute of Educational Sciences

ERIC Educational Resources Information Center

Akyürek, Erkan; Afacan, Özlem

2018-01-01

This study was conducted to determine the problems faced by graduate students when conducting scientific research and to make suggestions for solving these problems. The research model was a case study. Semi-structured interviews were conducted with participants in the study with questions about the problems encountered during scientific research…

Response problems in a vacation panel study

Treesearch

Christine A. Vogt; Susan I. Stewart

2001-01-01

This paper investigates response problems encountered in a panel study of travel behavior. Though the overall response rate to the three-wave panel study was acceptable (over 60%), three types of response problems were encountered: refusal, non-response, and attrition. In a follow-up phone survey, a sample of individuals from each problem response group was questioned...

The Angelchik prosthesis for gastro-oesophageal reflux: symptomatic and objective assessment.

PubMed Central

Weaver, R. M.; Temple, J. G.

1985-01-01

Twenty-three patients with intractable gastro-oesophageal reflux were treated by insertion of the Angelchik antireflux prosthesis. Good symptomatic relief was achieved in over 80% of patients reviewed up to 28 months after operation and there was marked resolution of oesophagitis as seen on endoscopy. Oesophageal manometry and pH studies performed preoperatively and at 3 and 12 months after operation, showed a significant increase in lower oesophageal sphincter pressure with decreased acid reflux. Some technical problems were encountered, but the prosthesis is potentially a simple and effective means of controlling gastro-oesophageal reflux. Images Fig. 1 PMID:4051424

Mathematical modeling of solid oxide fuel cells

NASA Technical Reports Server (NTRS)

Lu, Cheng-Yi; Maloney, Thomas M.

1988-01-01

Development of predictive techniques, with regard to cell behavior, under various operating conditions is needed to improve cell performance, increase energy density, reduce manufacturing cost, and to broaden utilization of various fuels. Such technology would be especially beneficial for the solid oxide fuel cells (SOFC) at it early demonstration stage. The development of computer models to calculate the temperature, CD, reactant distributions in the tubular and monolithic SOFCs. Results indicate that problems of nonuniform heat generation and fuel gas depletion in the tubular cell module, and of size limitions in the monolithic (MOD 0) design may be encountered during FC operation.

Evaluating sedimentation problems in activated sludge treatment plants operating at complete sludge retention time.

PubMed

Amanatidou, Elisavet; Samiotis, Georgios; Trikoilidou, Eleni; Pekridis, George; Taousanidis, Nikolaos

2015-02-01

Zero net sludge growth can be achieved by complete retention of solids in activated sludge wastewater treatment, especially in high strength and biodegradable wastewaters. When increasing the solids retention time, MLSS and MLVSS concentrations reach a plateau phase and observed growth yields values tend to zero (Yobs ≈ 0). In this work, in order to evaluate sedimentation problems arised due to high MLSS concentrations and complete sludge retention operational conditions, two identical innovative slaughterhouse wastewater treatment plants were studied. Measurements of wastewaters' quality characteristics, treatment plant's operational conditions, sludge microscopic analysis and state point analysis were conducted. Results have shown that low COD/Nitrogen ratios increase sludge bulking and flotation phenomena due to accidental denitrification in clarifiers. High return activated sludge rate is essential in complete retention systems as it reduces sludge condensation and hydraulic retention time in the clarifiers. Under certain operational conditions sludge loading rates can greatly exceed literature limit values. The presented methodology is a useful tool for estimation of sedimentation problems encountered in activated sludge wastewater treatment plants with complete retention time. Copyright © 2014 Elsevier Ltd. All rights reserved.

RL10 ignition limits test for Shuttle Centaur

NASA Technical Reports Server (NTRS)

1987-01-01

During routine development testing of the RL10A-3-3B engine a potential no-ignition condition was encountered when operating at certain propellant inlet conditions within the Shuttle Centaur G operating region. The conditions, the resulting investigative program, and methods to correct the potential problem are discussed. The Shuttle Centaur program was cancelled prior to completion of this effort. Although the RL10 engine in the Atlas Centaur vehicle is required by specification to operate over a wide range of propellant inlet conditions. The vehicle actually operates over a narrow range of conditions. This factor, combined with configuration differences between Atlas Centaur (or Titan Centaur) and the Shuttle Centaur RL10 engines, indicates the ignition problem does not exist for these vehicles. As a precautionary measure the vehicle manufacturer was requested to coordinate with Pratt and Whitney any anticipated changes in propellant inlet conditions from the current narrow range. An engineering change will be proposed for future RL10 deliveries to provide more consistent propellant flow to the igniter. This will permit operation of the engine throughout the wide range specification inlet conditions if desired.

Modifications to give HOPE/MDC 2.0 the capability to solve for or consider vent forces: Mission planning, mission analysis, and software formulation

NASA Technical Reports Server (NTRS)

Zyla, L. V.

1979-01-01

The modifications are described as necessary to give the Houston Operations Predictor/Estimator (HOPE) program the capability to solve for or consider vent forces for orbit determination. The model implemented in solving for vent forces is described along with the integrator problems encountered. A summary derivation of the mathematical principles applicable to solve/consider methodology is provided.

What the QDR Ought to Say about Landpower

DTIC Science & Technology

2013-01-01

debates center on the missions, costs, or effectiveness, one should be wary of those critics pro- moting a new “Vietnam syndrome ,” arguing the United...States should never again go down the path it did over the last decade.6 Playing to this syndrome led directly to the problems encountered before...an even greater burden for the United States in allied and partner operations. 22 Frank G. Hoffman and Mike Noonan , “Defense Reorganization

An engineering database management system for spacecraft operations

NASA Technical Reports Server (NTRS)

Cipollone, Gregorio; Mckay, Michael H.; Paris, Joseph

1993-01-01

Studies at ESOC have demonstrated the feasibility of a flexible and powerful Engineering Database Management System in support for spacecraft operations documentation. The objectives set out were three-fold: first an analysis of the problems encountered by the Operations team in obtaining and managing operations documents; secondly, the definition of a concept for operations documentation and the implementation of prototype to prove the feasibility of the concept; and thirdly, definition of standards and protocols required for the exchange of data between the top-level partners in a satellite project. The EDMS prototype was populated with ERS-l satellite design data and has been used by the operations team at ESOC to gather operational experience. An operational EDMS would be implemented at the satellite prime contractor's site as a common database for all technical information surrounding a project and would be accessible by the cocontractor's and ESA teams.

Mariner Venus-Mercury 1973 Project. Volume 1: Venus and Mercury 1 Encounters

NASA Technical Reports Server (NTRS)

1976-01-01

The primary mission report includes the Venus encounter and the first Mercury encounter. Plans and activities undertaken to successfully achieve the mission objectives are described. Operational activities are identified by mission operation system functions, providing a brief summary of each discipline. Spacecraft performance is summarized by subsystems.

Top-up operation at Pohang Light Source-II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hwang, I.; Huang, J. Y.; Kim, M.

2014-05-15

After three years of upgrading work, PLS-II (S. Shin, Commissioning of the PLS-II, JINST, January 2013) is now successfully operating. The top-up operation of the 3 GeV linear accelerator had to be delayed because of some challenges encountered, and PLS-II was run in decay mode at the beginning in March 2012. The main difficulties encountered in the top-up operation of PLS-II are different levels between the linear accelerator and the storage ring, the 14 narrow gap in-vacuum undulators in operation, and the full energy injection by 3 GeV linear accelerator. Large vertical emittance and energy jitter of the linac weremore » the major obstacles that called for careful control of injected beam to reduce beam loss in the storage ring during injection. The following measures were taken to resolve these problems: (1) The high resolution Libera BPM (see http://www.i-tech.si ) was implemented to measure the beam trajectory and energy. (2) Three slit systems were installed to filter the beam edge. (3) De-Qing circuit was applied to the modulator system to improve the energy stability of injected beam. As a result, the radiation by beam loss during injection is reduced drastically, and the top-up mode has been successfully operating since 19th March 2013. In this paper, we describe the experimental results of the PLS-II top-up operation and the improvement plan.« less

Tracking and data system support for the Pioneer project. Volume 3: Pioneer 10 from 1 April 1972 through the Jupiter encounter period, January 1974

NASA Technical Reports Server (NTRS)

Miller, R. B.

1975-01-01

The Tracking and Data Systems support of the Pioneer 10 mission from April 1, 1972 through the Jupiter encounter period which ended January 5, 1974 is described. The period covered involves operations in the interplanetary environment from the time of completion of the second trajectory correction to the start of Jupiter encounter; the implementation, planning, and testing that lead to the Jupiter encounter; and the operations during the 60 day encounter period.

Laser Doppler technology applied to atmospheric environmental operating problems

NASA Technical Reports Server (NTRS)

Weaver, E. A.; Bilbro, J. W.; Dunkin, J. A.; Jeffreys, H. B.

1976-01-01

Carbon dioxide laser Doppler ground wind data were very favorably compared with data from standard anemometers. As a result of these measurements, two breadboard systems were developed for taking research data: a continuous wave velocimeter and a pulsed Doppler system. The scanning continuous wave laser Doppler velocimeter developed for detecting, tracking and measuring aircraft wake vortices was successfully tested at an airport where it located vortices to an accuracy of 3 meters at a range of 150 meters. The airborne pulsed laser Doppler system was developed to detect and measure clear air turbulence (CAT). This system was tested aboard an aircraft, but jet stream CAT was not encountered. However, low altitude turbulence in cumulus clouds near a mountain range was detected by the system and encountered by the aircraft at the predicted time.

How to save distressed IDS-physician marriages: a case study.

PubMed

Collins, H; Johnson, B A

1998-04-01

A hospital-driven IDS that encounters serious problems resulting from ownership of a physician practice should address those problems by focusing on three core areas: vision and leadership, effectiveness of operations, and physician compensation arrangements. If changes in these areas do not lead to improvements, the IDS may need to consider organizational restructuring. In one case study, a hospital-driven IDS faced the problem of owning a poorly performing MSO with a captive physician group. The IDS's governing board determined that the organization lacked effective communication with the physicians and that realization of the organization's vision would require greater physician involvement in organizational decision making. The organization is expected to undergo some corporate reorganization in which physicians will acquire an equity interest in the enterprise.

Research into command, control, and communications in space construction

NASA Technical Reports Server (NTRS)

Davis, Randal

1990-01-01

Coordinating and controlling large numbers of autonomous or semi-autonomous robot elements in a space construction activity will present problems that are very different from most command and control problems encountered in the space business. As part of our research into the feasibility of robot constructors in space, the CSC Operations Group is examining a variety of command, control, and communications (C3) issues. Two major questions being asked are: can we apply C3 techniques and technologies already developed for use in space; and are there suitable terrestrial solutions for extraterrestrial C3 problems? An overview of the control architectures, command strategies, and communications technologies that we are examining is provided and plans for simulations and demonstrations of our concepts are described.

Apollo experience report: Lunar module environmental control subsystem

NASA Technical Reports Server (NTRS)

Gillen, R. J.; Brady, J. C.; Collier, F.

1972-01-01

A functional description of the environmental control subsystem is presented. Development, tests, checkout, and flight experiences of the subsystem are discussed; and the design fabrication, and operational difficulties associated with the various components and subassemblies are recorded. Detailed information is related concerning design changes made to, and problems encountered with, the various elements of the subsystem, such as the thermal control water sublimator, the carbon dioxide sensing and control units, and the water section. The problems associated with water sterilization, water/glycol formulation, and materials compatibility are discussed. The corrective actions taken are described with the expection that this information may be of value for future subsystems. Although the main experiences described are problem oriented, the subsystem has generally performed satisfactorily in flight.

Operational applications of satellite snowcover observations in Rio Grande drainage of Colorado

NASA Technical Reports Server (NTRS)

Washicheck, J. N.; Mikesell, T.

1975-01-01

Various mapping techniques were tried and evaluated. There were many problems encountered such as distinquishing clouds from snow and snow under trees. A partial solution to some of the problems involves ground reconnaissance and low air flights. Snow areas, cloud cover, and total areas were planimetered after transferring imagery by use of zoom transfer scope. These determinations were then compared to areas determined by use of a density slicer. Considerable adjustment is required for these two values to compare. NOAA pictures were also utilized in the evaluation. Forest cover is one of the parameters used in the modeling process. The determination of this percentage is being explored.

NASA technical advances in aircraft occupant safety. [clear air turbulence detectors, fire resistant materials, and crashworthiness

NASA Technical Reports Server (NTRS)

Enders, J. H.

1978-01-01

NASA's aviation safety technology program examines specific safety problems associated with atmospheric hazards, crash-fire survival, control of aircraft on runways, human factors, terminal area operations hazards, and accident factors simulation. While aircraft occupants are ultimately affected by any of these hazards, their well-being is immediately impacted by three specific events: unexpected turbulence encounters, fire and its effects, and crash impact. NASA research in the application of laser technology to the problem of clear air turbulence detection, the development of fire resistant materials for aircraft construction, and to the improvement of seats and restraint systems to reduce crash injuries are reviewed.

Attending Surgeons' Leadership Style in the Operating Room: Comparing Junior Residents' Experiences and Preferences.

PubMed

Kissane-Lee, Nicole A; Yule, Steven; Pozner, Charles N; Smink, Douglas S

2016-01-01

Recent studies have focused on surgeons' nontechnical skills in the operating room (OR), especially leadership. In an attempt to identify trainee preferences, we explored junior residents' opinions about the OR leadership style of teaching faculty. Overall, 20 interns and 20 mid-level residents completed a previously validated survey on the style of leadership they encountered, the style they preferred to receive, and the style they personally employed in the OR. In all, 4 styles were explored; authoritative: leader makes decisions and communicates them firmly; explanatory: leader makes decisions promptly, but explains them fully; consultative: leader consults with trainees when important decisions are made, and delegative: leader puts the problem before the group and makes decisions by majority opinion. Comparisons were completed using chi-square analysis. Junior resident preference for leadership style of attending surgeons in the OR differed from what they encountered. Overall, 62% of residents encountered an authoritative leadership style; however, only 9% preferred this (p < 0.001). Instead, residents preferred explanatory (53%) or consultative styles (41%). Preferences differed by postgraduate year. Although 40% of interns preferred a consultative style, 50% of mid-level residents preferred explanatory leadership. Junior resident preference of leadership style in the OR differs from what they actually encounter. This has the potential to create unwanted tension and may erode team performance. Awareness of this difference provides an opportunity for an educational intervention directed at both attendings and trainees. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Operation of emergency operating centers during mass casualty incidents in taiwan: a disaster management perspective.

PubMed

Wen, Jet-Chau; Tsai, Chia-Chou; Chen, Mei-Hsuan; Chang, Wei-Ta

2014-10-01

On April 27, 2011, a train derailed and crashed in Taiwan, causing a mass casualty incident (MCI) that was similar to a previous event and with similar consequences. In both disasters, the emergency operating centers (EOCs) could not effectively integrate associated agencies to deal with the incident. The coordination and utilization of resources were inefficient, which caused difficulty in command structure operation and casualty evacuation. This study was designed to create a survey questionnaire with problem items using disaster management phases mandated by Taiwan's Emergency Medical Care Law (EMCL), use statistical methods (t test) to analyze the results and issues the EOCs encountered during the operation, and propose solutions for those problems. Findings showed that EOCs lacked authority to intervene or coordinate with associated agencies. Also, placing emphasis on the recovery phase should improve future prevention and response mechanisms. To improve the response to MCIs, the EMCL needs to be amended to give EOCs the lead during disasters; use feedback from the recovery phase to improve future disaster management and operation coordination; and establish an information-sharing platform across agencies to address all aspects of relief work.(Disaster Med Public Health Preparedness. 2014;0:1-6).

Ulysses operations at Jupiter - Planning for the unknown

NASA Technical Reports Server (NTRS)

Angold, N.; Beech, P.; Garcia-Perez, R.; Mcgarry, A.; Standley, S.

1992-01-01

The operational preparations for the Ulysses encounter with Jupiter are described with particular attention given to requirements for survival in the Jovian environment, ground-segment planning, a deep-space network, and encounter activities. It is concluded that the successful operation of the Ulysses spacecraft at Jupiter was the culmination of many years of activity, from spacecraft design and mission planning to the coordination of the encounter activities and production of the detailed timeline.

A Study on the Application of Creative Problem Solving Teaching to Statistics Teaching

ERIC Educational Resources Information Center

Hu, Ridong; Xiaohui, Su; Shieh, Chich-Jen

2017-01-01

Everyone would encounter the life issue of solving complicated problems generated by economic behaviors among all activities for making a living. Various life problems encountered therefore could be generalized by economic statistics. In other words, a lot of important events in daily life are related to economic statistics. For this reason,…

Problems Encountered by Novice Pair Programmers

ERIC Educational Resources Information Center

Hanks, Brian

2008-01-01

In a study of the types of problems encountered by students that led them to seek assistance, Robins et al. [2006] found that the most common problems were related to trivial mechanics. The students in this study worked by themselves on their programming exercises. This article discusses a replication of the Robins et al. study in which the…

Earth resources ground data handling systems for the 1980's

NASA Technical Reports Server (NTRS)

Vanvleck, E. M.; Sinclair, K. F.; Pitts, S. W.; Slye, R. E.

1973-01-01

The system requirements of an operational data handling system for earth resources in the decade of the 1980's are investigated. Attention is drawn to problems encountered in meeting the stringent agricultural user requirements of that time frame. Such an understanding of requirements is essential not only in designing the ground system that will ultimately handle the data, but also in design studies of the earth resources platform, sensors, and data relay satellites which may be needed.

Small launchers (current and future projects in the world)

NASA Astrophysics Data System (ADS)

Naumann, W. G.

1993-01-01

Small satellites need launching services using small launchers capable of injecting 100 to 1000 kg into a polar orbit at an altitude of 1000 km. Operational small launchers are reviewed as well as developing and planned ones. Launcher characteristics, constraints, performance, and status are detailed. Few technical problems are encountered, as most launcher projects call for existing components and well known technologies. Most of the difficulties have come from launch site availability and from financial considerations.

Thermo-mechanical design aspects of mercury bombardment ion thrusters.

NASA Technical Reports Server (NTRS)

Schnelker, D. E.; Kami, S.

1972-01-01

The mechanical design criteria are presented as background considerations for solving problems associated with the thermomechanical design of mercury ion bombardment thrusters. Various analytical procedures are used to aid in the development of thruster subassemblies and components in the fields of heat transfer, vibration, and stress analysis. Examples of these techniques which provide computer solutions to predict and control stress levels encountered during launch and operation of thruster systems are discussed. Computer models of specific examples are presented.

User interface issues in supporting human-computer integrated scheduling

NASA Technical Reports Server (NTRS)

Cooper, Lynne P.; Biefeld, Eric W.

1991-01-01

Explored here is the user interface problems encountered with the Operations Missions Planner (OMP) project at the Jet Propulsion Laboratory (JPL). OMP uses a unique iterative approach to planning that places additional requirements on the user interface, particularly to support system development and maintenance. These requirements are necessary to support the concepts of heuristically controlled search, in-progress assessment, and iterative refinement of the schedule. The techniques used to address the OMP interface needs are given.

Advanced Materials and Coatings for Aerospace Applications

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa

2004-01-01

In the application area of aerospace tribology, researchers and developers must guarantee the highest degree of reliability for materials, components, and systems. Even a small tribological failure can lead to catastrophic results. The absence of the required knowledge of tribology, as Professor H.P. Jost has said, can act as a severe brake in aerospace vehicle systems-and indeed has already done so. Materials and coatings must be able to withstand the aerospace environments that they encounter, such as vacuum terrestrial, ascent, and descent environments; be resistant to the degrading effects of air, water vapor, sand, foreign substances, and radiation during a lengthy service; be able to withstand the loads, stresses, and temperatures encountered form acceleration and vibration during operation; and be able to support reliable tribological operations in harsh environments throughout the mission of the vehicle. This presentation id divided into two sections: surface properties and technology practice related to aerospace tribology. The first section is concerned with the fundamental properties of the surfaces of solid-film lubricants and related materials and coatings, including carbon nanotubes. The second is devoted to applications. Case studies are used to review some aspects of real problems related to aerospace systems to help engineers and scientists to understand the tribological issues and failures. The nature of each problem is analyzed, and the tribological properties are examined. All the fundamental studies and case studies were conducted at the NASA Glenn Research Center.

CO2 compressor vibration and cause analysis

NASA Technical Reports Server (NTRS)

Ying, Y. L.

1985-01-01

The operational experience of a large turbine drive carbon dioxide compressor train in a urea plant with capacity of 1620 tons/day is considered. After the initial start-up in 1976, the vibration in the HP cylinder was comparatively serious. The radial vibration reached 4.2 to 4.5 mils and fluctuated around this value. It was attributed to the rotating stall based on the spectrum analysis. Additional return line from the 4th to 4th and higher temperature of the 4th inlet has cured the vibration. Problems are described which were encountered in the operation along with their solutions, and/or improvements.

The orbiter mate/demate device

NASA Technical Reports Server (NTRS)

Miller, A. J.; Binkley, W. H.

1985-01-01

The numerous components and systems of the space shuttle orbiter mate/demate device (MDD) are discussed. Special emphasis is given, mechanisms and mechanical systems to discuss in general their requirements, functions, and design; and, where applicable, to relate any unusual problems encountered during the initial concept studies, final design, and construction are discussed. The MDD and its electrical, machinery, and mechanical systems, including the main hoisting system, power operated access service platform, wind restrain and adjustment mechanism, etc., were successfully designed and constructed. The MDD was used routinely during the initial orbiter-747 approach and landing test and the more recent orbiter flight tests recovery and mate operations.

Tracking and data system support for the Pioneer project. Volume 4: Pioneer 10, from January 1974 - January 1975 and Pioneer 11, from 1 May 1973 through Jupiter encounter period January 1975

NASA Technical Reports Server (NTRS)

Miller, R. B.; Barton, W. R.; Cloonan, E. A.; Nash, J. C.

1975-01-01

The Tracking and Data Systems support of Pioneer 10 from January 1974 through January 1975 is described along with Pioneer 11 support from May 1973 through Jupiter encounter. Topics covered include: operations in the interplanetary environment from the time of completion of the second trajectory correction to the start of Jupiter encounter; the implementation, planning, and testing that led to Jupiter encounter; and the operations during the 60-day encounter period for Pioneer 11.

Resource-Saving Cleaning Technologies for Power Plant Waste-Water Cooling Ponds

NASA Astrophysics Data System (ADS)

Zakonnova, Lyudmila; Nikishkin, Igor; Rostovzev, Alexandr

2017-11-01

One of the frequently encountered problems of power plant small cooling ponds is rapid eutrophication and related intensified development of phytoplankton ("hyperflow") and overgrowing of ponds by higher aquatic vegetation. As a result of hyper-flowering, an enormous amount of detritus settles on the condenser tubes, reducing the efficiency of the power plant operation. The development of higher aquatic vegetation contributes to the appearing of the shoals. As a result the volume, area and other characteristics of the cooling ponds are getting changed. The article describes the environmental problems of small manmade ponds of power plants and coal mines in mining regions. Two approaches to the problem of eutrophication are considered: technological and ecological. The negative effects of herbicides application to aquatic organisms are experimentally proved. An ecological approach to solving the problem by fish-land reclamation method is shown.

The critically ill injured patient.

PubMed

Cereda, Maurizio; Weiss, Yoram G; Deutschman, Clifford S

2007-03-01

Patients admitted to the ICU after severe trauma require frequent procedures in the operating room, particularly in cases where a damage control strategy is used. The ventilatory management of these patients in the operating room can be particularly challenging. These patients often have severely impaired respiratory mechanics because of acute lung injury and abdominal compartment syndrome. Consequently, the pressure and flow generation capabilities of standard anesthesia ventilators may be inadequate to support ventilation and gas exchange. This article presents the problems that may be encountered in patients who have severe abdominal and lung injuries, and the current management concepts used in caring for these patients in the critical care setting, to provide guidelines for the anesthetist faced with these patients in the operating room.

Performance data of the new free-piston shock tunnel at GALCIT

NASA Technical Reports Server (NTRS)

Hornung, Hans G.

1992-01-01

The new free-piston shock tunnel has been partially calibrated, and a range of operating conditions has been found. A large number of difficulties were encountered during the shake-down period, of which the ablation of various parts was the most severe. Solutions to these problems were found. The general principles of high-enthalpy simulation are outlined, and the parameter space covered by T5 is given. Examples of the operating data show that, with care, excellent repeatability may be obtained. The temporal uniformity of the reservoir pressure is very good, even at high enthalpy, because it is possible to operate at tailored-interface and tuned-piston conditions over the whole enthalpy range. Examples of heat transfer and Pitot-pressure measurements are also presented.

[Development of a software standardizing optical density with operation settings related to several limitations].

PubMed

Tu, Xiao-Ming; Zhang, Zuo-Heng; Wan, Cheng; Zheng, Yu; Xu, Jin-Mei; Zhang, Yuan-Yuan; Luo, Jian-Ping; Wu, Hai-Wei

2012-12-01

To develop a software that can be used to standardize optical density to normalize the procedures and results of standardization in order to effectively solve several problems generated during standardization of in-direct ELISA results. The software was designed based on the I-STOD method with operation settings to solve the problems that one might encounter during the standardization. Matlab GUI was used as a tool for the development. The software was tested with the results of the detection of sera of persons from schistosomiasis japonica endemic areas. I-STOD V1.0 (WINDOWS XP/WIN 7, 0.5 GB) was successfully developed to standardize optical density. A serial of serum samples from schistosomiasis japonica endemic areas were used to examine the operational effects of I-STOD V1.0 software. The results indicated that the software successfully overcame several problems including reliability of standard curve, applicable scope of samples and determination of dilution for samples outside the scope, so that I-STOD was performed more conveniently and the results of standardization were more consistent. I-STOD V1.0 is a professional software based on I-STOD. It can be easily operated and can effectively standardize the testing results of in-direct ELISA.

Development of welded metal bellows having minimum effective diameter change

NASA Technical Reports Server (NTRS)

Henschel, J. K.; Stevens, J. B.; Harvey, A. C.; Howland, J. S.; Rhee, S. S.

1972-01-01

A program of analysis, design, and fabrication was conducted to develop welded metal bellows having a minimum change in effective diameter for cryogenic turbomachinery face seal applications. Linear analysis of the principle types of bellows provided identification of concepts capable of meeting basic operation requirements. For the 6-inch (.152 m) mean diameter, 1.5-inch free length bellows studied, nonlinear analysis showed that opposed and nested toroidal bellows plates stiffened by means of alternating stiffener rings were capable of maintaining constant effective diameter within 0.3% and 0.1% respectively under the operating conditions of interest. Changes in effective diameter were due principally to bellows axial deflection with pressure differential having a lesser influence. Fabrication problems associated with joining the thin bellows plates to the relatively heavy stiffener rings were encountered and precluded assembly and testing of a bellows core. Fabrication problems are summarized and recommended fabrication methods for future effort are presented.

Anaerobic digestion foaming causes--a review.

PubMed

Ganidi, Nafsika; Tyrrel, Sean; Cartmell, Elise

2009-12-01

Anaerobic digestion foaming has been encountered in several sewage treatment plants in the UK. Foaming has raised major concerns for the water companies due to significant impacts on process efficiency and operational costs. Several foaming causes have been identified over the past few years by researchers. However, the supporting experimental information is limited and in some cases absent. The present report aims to provide a detailed review of the current anaerobic digestion foaming problem and to identify gaps in knowledge regarding the theory of foam formation in anaerobic digesters.

Development of an ultra-low-shock separation nut

NASA Technical Reports Server (NTRS)

Woebkenberg, W.; Matteo, D. N.; Williams, V. D.

1982-01-01

The technical problems encountered in the development of an advanced separation nut design are described. The nut is capable of sustaining a large preload and releasing that load with a low level of induced pyrotechnic shock, while demonstrating a tolerance for extremely high shock imposed by other pyrotechnic devices. The analysis of the separation nut was performed to acquire additional understanding of the phenomena affecting operation of the nut and to provide quantitative evaluation of design modification for aerospace applications.

Technical problems encountered with the LALA-1 flying laboratory

NASA Technical Reports Server (NTRS)

Swidzinski, J.

1978-01-01

A description is given of structural design changes necessitated by the conversion of the An-2R agricultural support aircraft into a flying test bed to be used in feasibility studies evaluating jet engines in agricultural support aircraft. The entire rear of the fuselage was radically modified to permit mounting of the Al-25 jet engine directly behind the trailing edge of the upper wing. The standard piston engine was retained to permit comparison between the two types of power plants in typical agricultural support operations.

User oriented data processing at the University of Michigan

NASA Technical Reports Server (NTRS)

Thomson, F. J.

1970-01-01

The multispectral techniques have shown themselves capable of solving problems in a large number of user areas. The results obtained are in some instances quite impressive. In many instances, the multispectral detection of various phenomena is an empirical fact for which there is little physical explanation today. To date, most of the user applications that have been addressed are exploratory in nature. The closest approximation to an operational situation encountered so far is that of the survey of wetlands in North Dakota reported in this paper.

A Low Power Cryogenic Shutter Mechanism for use in Infrared Images

NASA Technical Reports Server (NTRS)

Schwinger, D. Scott; Hakun, Claef F.

2000-01-01

This paper discusses the requirements, design, operation, and testing of the shutter mechanism for the Infrared Array Camera (IRAC). The shutter moves a mirror panel into or out of the incoming light path transitioning IRAC between data acquisition and calibration modes. The mechanism features a torsion flexure suspension system, two low-power rotary actuators, a balanced shaft, and a variable reluctance position sensor. Each of these items is discussed along with problems encountered during development and the implemented solutions.

Implicit approximate-factorization schemes for the low-frequency transonic equation

NASA Technical Reports Server (NTRS)

Ballhaus, W. F.; Steger, J. L.

1975-01-01

Two- and three-level implicit finite-difference algorithms for the low-frequency transonic small disturbance-equation are constructed using approximate factorization techniques. The schemes are unconditionally stable for the model linear problem. For nonlinear mixed flows, the schemes maintain stability by the use of conservatively switched difference operators for which stability is maintained only if shock propagation is restricted to be less than one spatial grid point per time step. The shock-capturing properties of the schemes were studied for various shock motions that might be encountered in problems of engineering interest. Computed results for a model airfoil problem that produces a flow field similar to that about a helicopter rotor in forward flight show the development of a shock wave and its subsequent propagation upstream off the front of the airfoil.

The 1989-1990 eruption of Redoubt Volcano, Alaska: impacts on aircraft operations

USGS Publications Warehouse

Casadevall, T.J.

1994-01-01

The December 1989-June 1990 eruption of Redoubt Volcano affected commercial and military air operations in the vicinity of Anchorage, Alaska. These effects were due to the direct impact of volcanic ash on jet aircraft, as well as to the rerouting and cancellations of flight operations owing to eruptive activity. Between December and February, five commercial jetliners were damaged from ash encounters. The most serious incident took place on December 15, 1989 when a Boeing 747-400 aircraft temporarily lost power of all four engines after encountering an ash cloud as the airplane descended for a landing in Anchorage. While there were no injuries to passengers, the damage to engines, avionics, and aircraft structure from this encounter is estimated at $80 million. Four additional encounters between jet aircraft and Redoubt ash clouds occurred in the Anchorage area on December 15 and 16, 1989 and February 21, 1990; none resulted in engine failure. Two additional encounters took place on December 17, 1989 when jet airliners encountered the Redoubt cloud over west Texas. At the time of these encounters, the cloud was up to 55 hours old and had traveled in excess of 2,900 nautical miles (5,300 km). Following the December 15 encounters, Anchorage International Airport remained open, however, most airline companies canceled operations for up to several days. As communications between Federal agencies and airlines improved, and as a better understanding of the nature and behavior of ash-rich eruption clouds was achieved, most airlines resumed normal service by early January 1990. The resulting loss of revenue at Anchorage International Airport during several months following the eruption is estimated to total $2.6 million. The impact on general aviation and military operations consisted mostly of cancellation and rerouting of flights. ?? 1994.

Evolution of general surgical problems in patients with left ventricular assist devices.

PubMed

McKellar, Stephen H; Morris, David S; Mauermann, William J; Park, Soon J; Zietlow, Scott P

2012-11-01

Left ventricular assist devices (LVADs) are increasingly used to treat patients with end-stage heart failure. These patients may develop acute noncardiac surgical problems around the time of LVAD implantation or, as survival continues to improve, chronic surgical problems as ambulatory patients remote from the LVAD implant. Previous reports of noncardiac surgical problems in LVAD patients included patients with older, first-generation devices and do not address newer, second-generation devices. We describe the frequency and management of noncardiac surgical problems encountered during LVAD support with these newer-generation devices to assist noncardiac surgeons involved in the care of patients with LVADs. We retrospectively reviewed the medical records of consecutive patients receiving LVADs at our institution. We collected data for any consultation by noncardiac surgeons within the scope of general surgery during LVAD support and subsequent treatment. Ninety-nine patients received implantable LVADs between 2003 and 2009 (first-generation, n = 19; second-generation, n = 80). Excluding intestinal hemorrhage, general surgical opinions were rendered for 34 patients with 49 problems, mostly in the acute recovery phase after LVAD implantation. Of those, 27 patients underwent 28 operations. Respiratory failure and intra-abdominal pathologies were the most common problems addressed, and LVAD rarely precluded operation. Patients with second-generation LVADs were more likely to survive hospitalization (P = .04) and develop chronic, rather than emergent, surgical problems. Patients with LVADs frequently require consultation from noncardiac surgeons within the scope of general surgeons and often require operation. Patients with second-generation LVADs are more likely to become outpatients and develop more elective surgical problems. Noncardiac surgeons will be increasingly involved in caring for patients with LVADs and should anticipate the problems unique to this patient population. Copyright © 2012 Mosby, Inc. All rights reserved.

Low-speed longitudinal orbiter qualities

NASA Technical Reports Server (NTRS)

Powers, B. G.

1985-01-01

The shuttle program took on the challenge of providing a manual landing capability for an operational vehicle returning from orbit. Some complex challenges were encountered in developing the longitudinal flying qualities required to land the orbiter manually in an operational environment. Approach and landing test flights indicated a tendency for pilot-induced oscillation near landing. Changes in the operational procedures reduced the difficulty of the landing task, and an adaptive stick filter was incorporated to reduce the severity of any pilot-induced oscillatory motions. Fixed-base, movingbase, and in-flight simulations were used for the evaluations, and in general, flight simulation was the only reliable means of assessing the low-speed longitudinal flying qualities problems. Overall, the orbiter control system and operational procedures have produced a good capability to routinely perform precise landings with a large, unpowered vehicle with a low lift-to-drag ratio.

Grumman Windstream 25 wind turbine generator. Final test report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sexton, J.H.

1980-03-01

The Grumman Windstream 25 Wind Turbine Generator (WTG) tested at the Rocky Flats Small Wind Systems Test Center (WSTC) was one of nineteen Windstream 25's manufactured by Grumman Energy Systems, Inc. The machine was considered a first generation prototype and is no longer being produced. While being tested at the WSTC, the Windstream 25 was still in a developmental stage, and operational problems were experienced during its testing period. It is important to underscore, however, that problems encountered during testing of the machine created valuable gains in experience and data for both Rocky Flats and Grumman personnel. It is believedmore » these gains have contributed significantly to further development of Grumman WTG's.« less

Conquering common breast-feeding problems.

PubMed

Walker, Marsha

2008-01-01

Meeting mothers' personal breast-feeding goals depends on a number of factors, including the timely resolution of any problems she encounters. Nurses are often the first providers who interact with the mother during the perinatal period and are positioned to guide mothers through the prevention and solving of breast-feeding problems. Although many problems may be "common," failure to remedy conditions that cause pain, frustration, and anxiety can lead to premature weaning and avoidance of breast-feeding subsequent children. This article describes strategies and interventions to alleviate common problems that breast-feeding mothers frequently encounter.

Satellite orbital conjunction reports assessing threatening encounters in space (SOCRATES)

NASA Astrophysics Data System (ADS)

Kelso, T. S.; Alfano, S.

2006-05-01

While many satellite operators are aware of the possibility of a collision between their satellite and another object in earth orbit, most seem unaware of the frequency of near misses occurring each day. Until recently, no service existed to advise satellite operators of an impending conjunction of a satellite payload with another satellite, putting the responsibility for determining these occurrences squarely on the satellite operator's shoulders. This problem has been further confounded by the lack of a timely, comprehensive data set of satellite orbital element sets and computationally efficient tools to provide predictions using industry-standard software. As a result, hundreds of conjunctions within 1 km occur each week, with little or no intervention, putting billions of dollars of space hardware at risk, along with their associated missions. As a service to the satellite operator community, the Center for Space Standards & Innovation (CSSI) offers SOCRATES-Satellite Orbital Conjunction Reports Assessing Threatening Encounters in Space. Twice each day, CSSI runs a list of all satellite payloads on orbit against a list of all objects on orbit using the catalog of all unclassified NORAD two-line element sets to look for conjunctions over the next seven days. The runs are made using STK/CAT-Satellite Tool Kit's Conjunction Analysis Tools-together with the NORAD SGP4 propagator in STK. This paper will discuss how SOCRATES works and how it can help satellite operators avoid undesired close approaches through advanced mission planning.

Operation and performance of the New Horizons Long-Range Reconnaissance Imager during the Pluto encounter

NASA Astrophysics Data System (ADS)

Conard, S. J.; Weaver, H. A.; Núñez, J. I.; Taylor, H. W.; Hayes, J. R.; Cheng, A. F.; Rodgers, D. J.

2017-09-01

The Long-Range Reconnaissance Imager (LORRI) is a high-resolution imaging instrument on the New Horizons spacecraft. LORRI collected over 5000 images during the approach and fly-by of the Pluto system in 2015, including the highest resolution images of Pluto and Charon and the four much smaller satellites (Styx, Nix, Kerberos, and Hydra) near the time of closest approach on 14 July 2015. LORRI is a narrow field of view (0.29°), Ritchey-Chrétien telescope with a 20.8 cm diameter primary mirror and a three-lens field flattener. The telescope has an effective focal length of 262 cm. The focal plane unit consists of a 1024 × 1024 pixel charge-coupled device (CCD) detector operating in frame transfer mode. LORRI provides panchromatic imaging over a bandpass that extends approximately from 350 nm to 850 nm. The instrument operates in an extreme thermal environment, viewing space from within the warm spacecraft. For this reason, LORRI has a silicon carbide optical system with passive thermal control, designed to maintain focus without adjustment over a wide temperature range from -100 C to +50 C. LORRI operated flawlessly throughout the encounter period, providing both science and navigation imaging of the Pluto system. We describe the preparations for the Pluto system encounter, including pre-encounter rehearsals, calibrations, and navigation imaging. In addition, we describe LORRI operations during the encounter, and the resulting imaging performance. Finally, we also briefly describe the post-Pluto encounter imaging of other Kuiper belt objects and the plans for the upcoming encounter with KBO 2014 MU69.

A Study of the Causes of Physical and Emotional Problems Encountered by Older Women Returning to Secretarial Employment After A Prolonged Absence. Final Report.

ERIC Educational Resources Information Center

Lloyd, Glenna G.

The problem of this study was to identify the cause of the physical and emotional problems encountered by older women who have returned to work after a prolonged absence. Such information, it was believed, would be valuable to business and educational institutions in retraining or updating prospective secretarial employees. Data for the study were…

Artificial intelligence for multi-mission planetary operations

NASA Technical Reports Server (NTRS)

Atkinson, David J.; Lawson, Denise L.; James, Mark L.

1990-01-01

A brief introduction is given to an automated system called the Spacecraft Health Automated Reasoning Prototype (SHARP). SHARP is designed to demonstrate automated health and status analysis for multi-mission spacecraft and ground data systems operations. The SHARP system combines conventional computer science methodologies with artificial intelligence techniques to produce an effective method for detecting and analyzing potential spacecraft and ground systems problems. The system performs real-time analysis of spacecraft and other related telemetry, and is also capable of examining data in historical context. Telecommunications link analysis of the Voyager II spacecraft is the initial focus for evaluation of the prototype in a real-time operations setting during the Voyager spacecraft encounter with Neptune in August, 1989. The preliminary results of the SHARP project and plans for future application of the technology are discussed.

Asian Rhinoplasty: Preoperative Simulation and Planning Using Adobe Photoshop.

PubMed

Kiranantawat, Kidakorn; Nguyen, Anh H

2015-11-01

A rhinoplasty in Asians differs from a rhinoplasty performed in patients of other ethnicities. Surgeons should understand the concept of Asian beauty, the nasal anatomy of Asians, and common problems encountered while operating on the Asian nose. With this understanding, surgeons can set appropriate goals, choose proper operative procedures, and provide an outcome that satisfies patients. In this article the authors define the concept of an Asian rhinoplasty-a paradigm shift from the traditional on-top augmentation rhinoplasty to a structurally integrated augmentation rhinoplasty-and provide a step-by-step procedure for the use of Adobe Photoshop as a preoperative program to simulate the expected surgical outcome for patients and to develop a preoperative plan for surgeons.

Radio speech communication problems reported in a survey of military pilots.

PubMed

Lahtinen, Taija M M; Huttunen, Kerttu H; Kuronen, Pentti O; Sorri, Martti J; Leino, Tuomo K

2010-12-01

Despite technological advances in conveying information, speech communication is still a key safety factor in aviation. Effective radio communication is necessary, for example, in building and maintaining good team situation awareness. However, little has been reported concerning the prevalence and nature of radio communication problems in everyday working environments in military aviation. We surveyed Finnish Defense Forces pilots regarding the prevalence of radio speech communication problems. Of the 225 pilots contacted, 75% replied to our survey. Altogether 138 of the respondents were fixed-wing pilots and 31 were helicopter pilots. Problems in radio communication occurred, on average, during 14% of flight time. The most prevalent problems were multiple speakers on the same radio frequency band causing overlapping speech, missing acknowledgments, high background noise especially during helicopter operations, and technical problems. Of the respondents, 18% (31 pilots) reported having encountered at least one potentially dangerous event caused by problems in radio communication during their military aviation career. If the employer were to offer extra hearing protection, such as custom-made ear plugs, 93% of the pilots indicated that they would use it. Communication can be a flight safety factor especially during intense air combat exercises and other information-loaded flights. During these situations, communication should be clear and focused on the most essential information. So, training and technical improvements are necessary for better communication. High quality radio speech communication also improves operational effectiveness in military aviation.

Affirmative Action and Women in Higher Education.

ERIC Educational Resources Information Center

Hazzard, Terry

The purposes of this paper are to: (1) discuss the historical development of women in higher education; (2) describe the implementation of federal policies for women; (3) focus on selected problems encountered by women in the work-place; and (4) offer recommendations and suggestions for eliminating some of the problems that women encounter. The…

Dilemmas in the (un)veiling of the diagnosis of Alzheimer's disease: walking an ethical and professional tight rope.

PubMed

Karnieli-Miller, Orit; Werner, Perla; Aharon-Peretz, Judith; Eidelman, Shmuel

2007-08-01

To enhance the understanding and effect of physician's difficulties, attitudes and communication styles on the disclosure of the diagnosis of AD in practice. Qualitative, phenomenological study, combining pre-encounter interviews with physicians, observations of actual encounters of diagnosis disclosure of AD, and post-encounter interviews. There were various ways or tactics to (un)veil the bad news that may be perceived as different ways of dulling the impact and avoiding full and therefore problematic statements. In the actual encounters this was accomplished by keeping encounters short, avoiding elaboration, confirmation of comprehension and explicit terminology and using fractured sentences. The present study's findings highlight the difficulties encountered in breaking the news about AD, in the way it is actually done, and the problems that may arise from this way of un/veiling the news. The main problem is that the reluctance to make a candid disclosure of the diagnosis as was demonstrated in this study may violate basic moral and legal rights and may also deprive patients and caregivers of some of the benefits of early disclosure of diagnosis. There is a need for assisting physicians to cope with their personal difficulties, problems and pitfalls in breaking the news.

Benchmarking Gas Path Diagnostic Methods: A Public Approach

NASA Technical Reports Server (NTRS)

Simon, Donald L.; Bird, Jeff; Davison, Craig; Volponi, Al; Iverson, R. Eugene

2008-01-01

Recent technology reviews have identified the need for objective assessments of engine health management (EHM) technology. The need is two-fold: technology developers require relevant data and problems to design and validate new algorithms and techniques while engine system integrators and operators need practical tools to direct development and then evaluate the effectiveness of proposed solutions. This paper presents a publicly available gas path diagnostic benchmark problem that has been developed by the Propulsion and Power Systems Panel of The Technical Cooperation Program (TTCP) to help address these needs. The problem is coded in MATLAB (The MathWorks, Inc.) and coupled with a non-linear turbofan engine simulation to produce "snap-shot" measurements, with relevant noise levels, as if collected from a fleet of engines over their lifetime of use. Each engine within the fleet will experience unique operating and deterioration profiles, and may encounter randomly occurring relevant gas path faults including sensor, actuator and component faults. The challenge to the EHM community is to develop gas path diagnostic algorithms to reliably perform fault detection and isolation. An example solution to the benchmark problem is provided along with associated evaluation metrics. A plan is presented to disseminate this benchmark problem to the engine health management technical community and invite technology solutions.

Chiropractic Observation and Analysis Study (COAST): providing an understanding of current chiropractic practice.

PubMed

French, Simon D; Charity, Melanie J; Forsdike, Kirsty; Gunn, Jane M; Polus, Barbara I; Walker, Bruce F; Chondros, Patty; Britt, Helena C

2013-11-18

COAST (Chiropractic Observation and Analysis Study) aimed to describe the clinical practices of chiropractors in Victoria, Australia. Cross-sectional study using the BEACH (Bettering the Evaluation and Care of Health) methods for general practice. 180 chiropractors in active clinical practice in Victoria were randomly selected from the list of 1298 chiropractors registered on Chiropractors Registration Board of Victoria. Twenty-four chiropractors were ineligible, 72 agreed to participate, and 52 completed the study. Each participating chiropractor documented encounters with up to 100 consecutive patients. For each chiropractor-patient encounter, information collected included patient health profile, patient reasons for encounter, problems and diagnoses, and chiropractic care. Data were collected on 4464 chiropractor-patient encounters from 52 chiropractors between 11 December 2010 and 28 September 2012. In most (71%) encounters, patients were aged 25-64 years; 1% of encounters were with infants (age < 1 year; 95% CI, 0.3%-3.2%). Musculoskeletal reasons for encounter were described by patients at a rate of 60 per 100 encounters (95% CI, 54-67 encounters) and maintenance and wellness or check-up reasons were described at a rate of 39 per 100 encounters (95% CI, 33-47 encounters). Back problems were managed at a rate of 62 per 100 encounters (95% CI, 55-71 encounters). The most frequent care provided by the chiropractors was spinal manipulative therapy and massage. A range of conditions are managed by chiropractors in Victoria, Australia, but most commonly these conditions are musculoskeletal-related. These results can be used by stakeholders of the chiropractic profession in workforce development, education and health care policy.

Multi-Year Impacts of Ecotourism on Whale Shark (Rhincodon typus) Visitation at Ningaloo Reef, Western Australia

PubMed Central

Sanzogni, R. L.; Meekan, M. G.; Meeuwig, J. J.

2015-01-01

In-water viewing of sharks by tourists has become a popular and lucrative industry. There is some concern that interactions with tourists with ecotourism operations might harm sharks through disruption of behaviours. Here, we analysed five years of whale shark (Rhincodon typus) encounter data by an ecotourism industry at Ningaloo Reef, Western Australia, to assess the impact of ecotourism interactions on shark visitation, within the context of the biological and physical oceanography of the region. Our data base consisted of 2823 encounter records for 951 individual whale sharks collected by ecotourism operators between 2007 and 2011. We found that total encounters per whale shark and encounters per boat trip increased through time. On average, whale sharks re-encountered in subsequent years were encountered earlier, stayed longer and tended to be encountered more often within a season than sharks that were only encountered in a single year. Sequential comparisons between years did not show any patterns consistent with disturbance and the rate of departure of whale sharks from the aggregation was negatively correlated to the number of operator trips. Overall, our analysis of this multi-year data base found no evidence that interactions with tourists affected the likelihood of whale shark re-encounters and that instead, physical and biological environmental factors had a far greater influence on whale shark visitation rates. Our approach provides a template for assessing the effects of ecotourism interactions and environmental factors on the visitation patterns of marine megafauna over multiple years. PMID:26398338

Multi-Year Impacts of Ecotourism on Whale Shark (Rhincodon typus) Visitation at Ningaloo Reef, Western Australia.

PubMed

Sanzogni, R L; Meekan, M G; Meeuwig, J J

2015-01-01

In-water viewing of sharks by tourists has become a popular and lucrative industry. There is some concern that interactions with tourists with ecotourism operations might harm sharks through disruption of behaviours. Here, we analysed five years of whale shark (Rhincodon typus) encounter data by an ecotourism industry at Ningaloo Reef, Western Australia, to assess the impact of ecotourism interactions on shark visitation, within the context of the biological and physical oceanography of the region. Our data base consisted of 2823 encounter records for 951 individual whale sharks collected by ecotourism operators between 2007 and 2011. We found that total encounters per whale shark and encounters per boat trip increased through time. On average, whale sharks re-encountered in subsequent years were encountered earlier, stayed longer and tended to be encountered more often within a season than sharks that were only encountered in a single year. Sequential comparisons between years did not show any patterns consistent with disturbance and the rate of departure of whale sharks from the aggregation was negatively correlated to the number of operator trips. Overall, our analysis of this multi-year data base found no evidence that interactions with tourists affected the likelihood of whale shark re-encounters and that instead, physical and biological environmental factors had a far greater influence on whale shark visitation rates. Our approach provides a template for assessing the effects of ecotourism interactions and environmental factors on the visitation patterns of marine megafauna over multiple years.

The BRITE Constellation Nanosatellite Mission: Testing, Commissioning, and Operations

NASA Astrophysics Data System (ADS)

Pablo, H.; Whittaker, G. N.; Popowicz, A.; Mochnacki, S. M.; Kuschnig, R.; Grant, C. C.; Moffat, A. F. J.; Rucinski, S. M.; Matthews, J. M.; Schwarzenberg-Czerny, A.; Handler, G.; Weiss, W. W.; Baade, D.; Wade, G. A.; Zocłońska, E.; Ramiaramanantsoa, T.; Unterberger, M.; Zwintz, K.; Pigulski, A.; Rowe, J.; Koudelka, O.; Orleański, P.; Pamyatnykh, A.; Neiner, C.; Wawrzaszek, R.; Marciniszyn, G.; Romano, P.; Woźniak, G.; Zawistowski, T.; Zee, R. E.

2016-12-01

BRIght Target Explorer (BRITE) Constellation, the first nanosatellite mission applied to astrophysical research, is a collaboration among Austria, Canada and Poland. The fleet of satellites (6 launched; 5 functioning) performs precise optical photometry of the brightest stars in the night sky. A pioneering mission like BRITE—with optics and instruments restricted to small volume, mass and power in several nanosatellites, whose measurements must be coordinated in orbit—poses many unique challenges. We discuss the technical issues, including problems encountered during on-orbit commissioning (especially higher-than-expected sensitivity of the CCDs to particle radiation). We describe in detail how the BRITE team has mitigated these problems, and provide a complete overview of mission operations. This paper serves as a template for how to effectively plan, build and operate future low-cost niche-driven space astronomy missions. Based on data collected by the BRITE Constellation satellite mission, designed, built, launched, operated and supported by the Austrian Research Promotion Agency (FFG), the University of Vienna, the Technical University of Graz, the Canadian Space Agency (CSA), the University of Toronto Institute for Aerospace Studies (UTIAS), the Foundation for Polish Science & Technology (FNiTP MNiSW), and National Science Centre (NCN).

Lessons Learned from the Node 1 Atmosphere Control and Storage and Water Recovery and Management Subsystem Design

NASA Technical Reports Server (NTRS)

Williams, David E.

2010-01-01

Node 1 flew to the International Space Station (ISS) on Flight 2A during December 1998. To date the National Aeronautics and Space Administration (NASA) has learned a lot of lessons from this module based on its history of approximately two years of acceptance testing on the ground and currently its twelve years on-orbit. This paper will provide an overview of the ISS Environmental Control and Life Support (ECLS) design of the Node 1 Atmosphere Control and Storage (ACS) and Water Recovery and Management (WRM) subsystems and it will document some of the lessons that have been learned to date for these subsystems based on problems prelaunch, problems encountered on-orbit, and operational problems/concerns. It is hoped that documenting these lessons learned from ISS will help in preventing them in future Programs.

A restrained-torque-based motion instructor: forearm flexion/extension-driving exoskeleton

NASA Astrophysics Data System (ADS)

Nishimura, Takuya; Nomura, Yoshihiko; Sakamoto, Ryota

2013-01-01

When learning complicated movements by ourselves, we encounter such problems as a self-rightness. The self-rightness results in a lack of detail and objectivity, and it may cause to miss essences and even twist the essences. Thus, we sometimes fall into the habits of doing inappropriate motions. To solve these problems or to alleviate the problems as could as possible, we have been developed mechanical man-machine human interfaces to support us learning such motions as cultural gestures and sports form. One of the promising interfaces is a wearable exoskeleton mechanical system. As of the first try, we have made a prototype of a 2-link 1-DOF rotational elbow joint interface that is applied for teaching extension-flexion operations with forearms and have found its potential abilities for teaching the initiating and continuing flection motion of the elbow.

Lessons Learned from the Node 1 Atmosphere Control and Storage and Water Recovery and Management Subsystem Design

NASA Technical Reports Server (NTRS)

Williams, David E.

2011-01-01

Node 1 flew to the International Space Station (ISS) on Flight 2A during December 1998. To date the National Aeronautics and Space Administration (NASA) has learned a lot of lessons from this module based on its history of approximately two years of acceptance testing on the ground and currently its twelve years on-orbit. This paper will provide an overview of the ISS Environmental Control and Life Support (ECLS) design of the Node 1 Atmosphere Control and Storage (ACS) and Water Recovery and Management (WRM) subsystems and it will document some of the lessons that have been learned to date for these subsystems based on problems prelaunch, problems encountered on-orbit, and operational problems/concerns. It is hoped that documenting these lessons learned from ISS will help in preventing them in future Programs.

The Problem-Based Learning Process: Reflections of Pre-Service Elementary School Teachers

ERIC Educational Resources Information Center

Baysal, Zeliha Nurdan

2017-01-01

This study aims to identify the benefits acquired by third-year pre-service elementary school teachers participating in a problem-based learning process in social studies education, the issues they encountered in that process and those they are likely to encounter, and their feelings about the process. Semi-structured interviews were used as one…

Silicon crystal growth in vacuum

NASA Technical Reports Server (NTRS)

Khattak, C. P.; Schmid, F.

1982-01-01

The most developed process for silicon crystal growth is the Czochralski (CZ) method which was in production for over two decades. In an effort to reduce cost of single crystal silicon for photovoltaic applications, a directional solidification technique, Heat Exchanger Method (HEM), was adapted. Materials used in HEM and CZ furnaces are quite similar (heaters, crucibles, insulation, etc.). To eliminate the cost of high purity argon, it was intended to use vacuum operation in HEM. Two of the major problems encountered in vacuum processing of silicon are crucible decomposition and silicon carbide formation in the melt.

Contribution of wind energy to the energy balance of a combined solar and wind energy system. Part 1: System description, data acquisition and system performance

NASA Astrophysics Data System (ADS)

Ferger, R.; Machens, U.

1985-05-01

A one-family house was equipped with a combined solar and wind energy system plus a night storage heater to measure the seasonal complementary contribution of wind and solar energy to energy demand. Project implementation, problems encountered and modifications to the initial system are described. Meteorological and operational data and house consumption data were recorded on computer-based measuring system. Data on the combined effects of and interdependence between solar collector and wind energy converter are discussed.

The design, development, fabrication and testing of two (2) Non-Spin Platforms, (NSP)

NASA Technical Reports Server (NTRS)

1975-01-01

The non spin platform is a means for achieving the very low acceleration requirements for cost effective space processing experiments on research rocket flights. These platforms have a low initial cost, are re-usable and have extremely low refurbishment cost. In order to attain this goal, commercially available components were used and only the necessary quality control standards were imposed. A detailed system description, the very few design problems encountered, the operational procedures (both pre-flight and post-flight), and the maintenance requirements are described.

The Development and Implementation of Ground Safety Requirements for Project Orion Abort Flight Testing - A Case Study

NASA Technical Reports Server (NTRS)

Kirkpatrick, Paul D.; Williams, Jeffrey G.; Condzella, Bill R.

2008-01-01

A rigorous set of detailed ground safety requirements is required to make sure that ground support equipment (GSE) and associated planned ground operations are conducted safely. Detailed ground safety requirements supplement the GSE requirements already called out in NASA-STD-5005. This paper will describe the initial genesis of these ground safety requirements, the establishment and approval process and finally the implementation process for Project Orion. The future of the requirements will also be described. Problems and issues encountered and overcame will be discussed.

Artefacts found in computed radiography.

PubMed

Cesar, L J; Schueler, B A; Zink, F E; Daly, T R; Taubel, J P; Jorgenson, L L

2001-02-01

Artefacts on radiographic images are distracting and may compromise accurate diagnosis. Although most artefacts that occur in conventional radiography have become familiar, computed radiography (CR) systems produce artefacts that differ from those found in conventional radiography. We have encountered a variety of artefacts in CR images that were produced from four different models plate reader. These artefacts have been identified and traced to the imaging plate, plate reader, image processing software or laser printer or to operator error. Understanding the potential sources of CR artefacts will aid in identifying and resolving problems quickly and help prevent future occurrences.

Use of robotic-assisted laparoscopic Mitrofanoff appendicovesicostomy in a paediatric patient: problem encountered.

PubMed

Chan, Ivy H Y; Li, Florence H Q; Lan, Lawrence C L; Wong, Kenneth K Y; Yip, Peter K F; Tam, Paul K H

2015-10-01

This report is of robotic-assisted laparoscopic Mitrofanoff appendicovesicostomy in a 12-year-old patient with detrusor underactivity and hereditary sensory neuropathy. The whole operation was performed in 555 minutes with no open conversion. The patient experienced one episode of stomal stenosis, which required dilatation. At 3-year follow-up, the patient had both stomal and urinary continence. This is a safe and effective procedure to create a means of urinary catheterisation with avoidance of a large unsightly scar and comparable clinical outcome to an open procedure.

Application of a distributed network in computational fluid dynamic simulations

NASA Technical Reports Server (NTRS)

Deshpande, Manish; Feng, Jinzhang; Merkle, Charles L.; Deshpande, Ashish

1994-01-01

A general-purpose 3-D, incompressible Navier-Stokes algorithm is implemented on a network of concurrently operating workstations using parallel virtual machine (PVM) and compared with its performance on a CRAY Y-MP and on an Intel iPSC/860. The problem is relatively computationally intensive, and has a communication structure based primarily on nearest-neighbor communication, making it ideally suited to message passing. Such problems are frequently encountered in computational fluid dynamics (CDF), and their solution is increasingly in demand. The communication structure is explicitly coded in the implementation to fully exploit the regularity in message passing in order to produce a near-optimal solution. Results are presented for various grid sizes using up to eight processors.

The National Long Term Care Demonstration: operational issues encountered in developing the research design.

PubMed

Carcagno, G J; Kemper, P

1983-01-01

This paper describes the design of the National Long Term Care Demonstration and its evaluation and discusses a number of operational issues encountered in the design process: simultaneous design of research and operations, identification of the target population, randomization, collection of comparable data, development of an assessment instrument, potential changes in existing programs, and termination planning.

SHARP: Automated monitoring of spacecraft health and status

NASA Technical Reports Server (NTRS)

Atkinson, David J.; James, Mark L.; Martin, R. Gaius

1991-01-01

Briefly discussed here are the spacecraft and ground systems monitoring process at the Jet Propulsion Laboratory (JPL). Some of the difficulties associated with the existing technology used in mission operations are highlighted. A new automated system based on artificial intelligence technology is described which seeks to overcome many of these limitations. The system, called the Spacecraft Health Automated Reasoning Prototype (SHARP), is designed to automate health and status analysis for multi-mission spacecraft and ground data systems operations. The system has proved to be effective for detecting and analyzing potential spacecraft and ground systems problems by performing real-time analysis of spacecraft and ground data systems engineering telemetry. Telecommunications link analysis of the Voyager 2 spacecraft was the initial focus for evaluation of the system in real-time operations during the Voyager spacecraft encounter with Neptune in August 1989.

Software design for automated assembly of truss structures

NASA Technical Reports Server (NTRS)

Herstrom, Catherine L.; Grantham, Carolyn; Allen, Cheryl L.; Doggett, William R.; Will, Ralph W.

1992-01-01

Concern over the limited intravehicular activity time has increased the interest in performing in-space assembly and construction operations with automated robotic systems. A technique being considered at LaRC is a supervised-autonomy approach, which can be monitored by an Earth-based supervisor that intervenes only when the automated system encounters a problem. A test-bed to support evaluation of the hardware and software requirements for supervised-autonomy assembly methods was developed. This report describes the design of the software system necessary to support the assembly process. The software is hierarchical and supports both automated assembly operations and supervisor error-recovery procedures, including the capability to pause and reverse any operation. The software design serves as a model for the development of software for more sophisticated automated systems and as a test-bed for evaluation of new concepts and hardware components.

Method for conducting electroless metal-plating processes

DOEpatents

Petit, George S.; Wright, Ralph R.

1978-01-01

This invention is an improved method for conducting electroless metal-plating processes in a metal tank which is exposed to the plating bath. The invention solves a problem commonly encountered in such processes: how to determine when it is advisable to shutdown the process in order to clean and/or re-passivate the tank. The new method comprises contacting the bath with a current-conducting, non-catalytic probe and, during plating operations, monitoring the gradually changing difference in electropotential between the probe and tank. It has been found that the value of this voltage is indicative of the extent to which nickel-bearing decomposition products accumulate on the tank. By utilizing the voltage to determine when shutdown for cleaning is advisable, the operator can avoid premature shutdown and at the same time avoid prolonging operations to the point that spontaneous decomposition occurs.

Impact of Hospital Information Systems on Emergency Patient Processing

PubMed Central

Rusnak, James E.

1981-01-01

The Emergency Department offers the Hospital Information System's designer some unique problems to solve in the operational areas of patient registration, order entry, charge recording, and treatment processing. In a number of instances, Hospital Information Systems implementers have encountered serious difficulties in trying to design system components to support the requirements of the Emergency Services Department's operations. Washington Hospital has developed a very effective system for Emergency Services. The system's features are designed to meet the special requirements of the department and to maximize the use of the data captured by the Hospital Information System. The system supports accurate and timely charging for services. The treatment of the patient has been dramatically improved through the use of a computerized order processing and control. The installed systems resulted in a higher quality of care and cost effective operations.

SHARP - Automated monitoring of spacecraft health and status

NASA Technical Reports Server (NTRS)

Atkinson, David J.; James, Mark L.; Martin, R. G.

1990-01-01

Briefly discussed here are the spacecraft and ground systems monitoring process at the Jet Propulsion Laboratory (JPL). Some of the difficulties associated with the existing technology used in mission operations are highlighted. A new automated system based on artificial intelligence technology is described which seeks to overcome many of these limitations. The system, called the Spacecraft Health Automated Reasoning Prototype (SHARP), is designed to automate health and status analysis for multi-mission spacecraft and ground data systems operations. The system has proved to be effective for detecting and analyzing potential spacecraft and ground systems problems by performing real-time analysis of spacecraft and ground data systems engineering telemetry. Telecommunications link analysis of the Voyager 2 spacecraft was the initial focus for evaluation of the system in real-time operations during the Voyager spacecraft encounter with Neptune in August 1989.

Ability of Social Work Students to Determine the Appropriateness of Solutions to Problems Encountered in Social Work Practice.

ERIC Educational Resources Information Center

Sturges, Jack; Yarbrough, Roy D.

The purpose of this study was to determine whether there was an association between the amount of formal social work education completed and ability of students to judge the degree of appropriateness of proposed solutions to problems frequently encountered in social work practice, and secondarily to determine whether students' judgments of problem…

Mothers' Perceptions of Citizenship, Practices for Developing Citizenship Conscience of Their Children and Problems They Encountered

ERIC Educational Resources Information Center

Ersoy, A. Figen

2012-01-01

Family plays an important role in the development of citizenship awareness of children. The purpose of the present study is to figure out the citizenship perceptions of mothers, their practices for developing citizenship conscience of their children and to explore the problems they have encountered. In this study, critical case sampling method has…

Tactics Employed and Problems Encountered by University English Majors in Hong Kong in Using a Dictionary

ERIC Educational Resources Information Center

Chan, Alice Yin Wa

2005-01-01

Building on the results of a small-scale survey which investigated the general use of dictionaries by university English majors in Hong Kong using a questionnaire survey and their specific use of dictionaries using an error correction task, this article discusses the tactics these students employed and the problems they encountered when using a…

Design and application of gas-gap heat switches

NASA Technical Reports Server (NTRS)

Chan, C. K.; Ross, R. G., Jr.

1990-01-01

Gas-gap heat switches can serve as an effective means of thermally disconnecting a standby cryocooler when the primary (operating) cooler is connected and vice versa. The final phase of the development and test of a cryogenic heat switch designed for loads ranging from 2 watts at 8 K, to 100 watts at 80 K are described. Achieved heat-switch on/off conductance ratio ranged from 11,000 at 8 K to 2200 at 80 K. A particularly challenging element of heat-switch design is achieving satisfactory operation when large temperatures differentials exist across the switch. A special series of tests and analyses was conducted and used in this Phase-2 activity to evaluate the developed switches for temperature differentials ranging up to 200 K. Problems encountered at the maximum levels are described and analyzed, and means of avoiding the problems in the future are presented. A comprehensive summary of the overall heat-switch design methodology is also presented with special emphasis on lessons learned over the course of the 4-year development effort.

Asian Rhinoplasty: Preoperative Simulation and Planning Using Adobe Photoshop

PubMed Central

Kiranantawat, Kidakorn; Nguyen, Anh H.

2015-01-01

A rhinoplasty in Asians differs from a rhinoplasty performed in patients of other ethnicities. Surgeons should understand the concept of Asian beauty, the nasal anatomy of Asians, and common problems encountered while operating on the Asian nose. With this understanding, surgeons can set appropriate goals, choose proper operative procedures, and provide an outcome that satisfies patients. In this article the authors define the concept of an Asian rhinoplasty—a paradigm shift from the traditional on-top augmentation rhinoplasty to a structurally integrated augmentation rhinoplasty—and provide a step-by-step procedure for the use of Adobe Photoshop as a preoperative program to simulate the expected surgical outcome for patients and to develop a preoperative plan for surgeons. PMID:26648803

Tighten water-chemistry control after boiler layup

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brestel, L.

1994-01-01

The potential for internal deposition and corrosion can affect boiler reliability by reducing thermal efficiency, tube integrity, and the time between chemical cleanings. While chemical control specifications for normal operation have been developed by consensus of manufacturers and industry, their impact on shutdowns, layups, and startups is not always appreciated. The discussion of chemical-control options applies to boiler systems operating in the medium- and high-pressure ranges. Identification and correction of root causes underlying the chemistry problems encountered and application of the principles involved should result in shorter startup times, improved control over phosphate hideout, and reduced need for chemical cleaning.more » Each of these has a significant cost impact; together, they are the true measure of a successful chemistry-control program.« less

Initial Operation of the Nuclear Thermal Rocket Element Environmental Simulator

NASA Technical Reports Server (NTRS)

Emrich, William J., Jr.; Pearson, J. Boise; Schoenfeld, Michael P.

2015-01-01

The Nuclear Thermal Rocket Element Environmental Simulator (NTREES) facility is designed to perform realistic non-nuclear testing of nuclear thermal rocket (NTR) fuel elements and fuel materials. Although the NTREES facility cannot mimic the neutron and gamma environment of an operating NTR, it can simulate the thermal hydraulic environment within an NTR fuel element to provide critical information on material performance and compatibility. The NTREES facility has recently been upgraded such that the power capabilities of the facility have been increased significantly. At its present 1.2 MW power level, more prototypical fuel element temperatures nay now be reached. The new 1.2 MW induction heater consists of three physical units consisting of a transformer, rectifier, and inverter. This multiunit arrangement facilitated increasing the flexibility of the induction heater by more easily allowing variable frequency operation. Frequency ranges between 20 and 60 kHz can accommodated in the new induction heater allowing more representative power distributions to be generated within the test elements. The water cooling system was also upgraded to so as to be capable of removing 100% of the heat generated during testing In this new higher power configuration, NTREES will be capable of testing fuel elements and fuel materials at near-prototypic power densities. As checkout testing progressed and as higher power levels were achieved, several design deficiencies were discovered and fixed. Most of these design deficiencies were related to stray RF energy causing various components to encounter unexpected heating. Copper shielding around these components largely eliminated these problems. Other problems encountered involved unexpected movement in the coil due to electromagnetic forces and electrical arcing between the coil and a dummy test article. The coil movement and arcing which were encountered during the checkout testing effectively destroyed the induction coil in use at the time and resulted in NTREES being out of commission for a couple of months while a new stronger coil was procured. The new coil includes several additional pieces of support structure to prevent coil movement in the future. In addition, new insulating test article support components have been fabricated to prevent unexpected arcing to the test articles. Additional activities are also now underway to address ways in which the radial temperature profiles across test articles may be controlled such that they are more prototypical of what they would encounter in an operating nuclear engine. The causes of the temperature distribution problem are twofold. First, the fuel element test article is isolated in NTREES as opposed to being in the midst of many other mostly identical fuel elements in a nuclear engine. As a result, the fuel element heat flux boundary conditions in NTREES are far from adiabatic as would normally be the case in a reactor. Second, induction heating skews the power distribution such that power is preferentially deposited near the outside of the fuel element. Nuclear heating, conversely, deposits its power much more uniformly throughout the fuel element. Current studies are now looking at various schemes to adjust the amount of thermal radiation emitted from the fuel element surface so as to essentially vary the thermal boundary conditions on the test article. It is hoped that by properly adjusting the thermal boundary conditions on the fuel element test article, it may be possible to substantially correct for the inappropriate radial power distributions resulting from the induction heating so as to yield a more nearly correct temperature distribution throughout the fuel element.

Analysis of medical treatment at a field hospital following Hurricane Andrew, 1992.

PubMed

Alson, R; Alexander, D; Leonard, R B; Stringer, L W

1993-11-01

To determine what medical care was required of a special operations response team by a community devastated by a major hurricane. Retrospective analysis of 1,544 patient encounter forms generated at a field hospital set up in Homestead, Florida, after Hurricane Andrew in August 1992 and staffed by the special operations response team from Forsyth County, North Carolina. All persons presenting for treatment. One thousand two hundred three adult patients and 336 pediatric patients were seen by the special operations response team. Only five of the injuries treated were due directly to the hurricane, whereas 285 of the treated injuries were sustained during clean-up activities. Most of the care provided was routine medical care denied the citizens due to the loss of their physicians' offices and clinics. Supplies of tetanus toxoid, antibiotics, and insulin were depleted in 24 hours. Resupplying these items and acquiring other medication to refill prescriptions constituted a pressing problem. The primary function of medical personnel responding to an area hit by a major hurricane will be to provide general medical care. Any trauma encountered will be primarily due to clean-up activities and not due to the hurricane itself. Responding medical personnel should plan on providing their own food and water for the first 72 hours and be well stocked with antibiotics, tetanus toxoid, and insulin.

LESSONS LEARNED IN OPERATING THE HOSE-IN-HOSE SYSTEM FOR TRANSFSERRING SLUDGE AT HANFORDS K-BASINS

DOE Office of Scientific and Technical Information (OSTI.GOV)

PERES MW

In May 2007, the Department of Energy and the Fluor Hanford K Basin Closure Project completed transferring sludge from the K East Basin to new containers in the K West Basin using a Hose-in-Hose system. This project presented a number of complex and unique technical, operational, and management challenges that had to be resolved to complete the required transfers and satisfy project milestones. The project team (including DOE; regulators; and Fluor management, operations, maintenance, engineering and all other support organizations) found innovative solutions to each challenge. This paper records lessons learned during the operational phase of the sludge transfer viamore » the Hose-In-Hose system. The subject is limited to the operational phase and does not cover design, development, testing or turnover. A discussion of the situation or problem encountered is provided, along with the lesson learned as applicable to a future program or project.« less

Energy and water quality management systems for water utility's operations: a review.

PubMed

Cherchi, Carla; Badruzzaman, Mohammad; Oppenheimer, Joan; Bros, Christopher M; Jacangelo, Joseph G

2015-04-15

Holistic management of water and energy resources is critical for water utilities facing increasing energy prices, water supply shortage and stringent regulatory requirements. In the early 1990s, the concept of an integrated Energy and Water Quality Management System (EWQMS) was developed as an operational optimization framework for solving water quality, water supply and energy management problems simultaneously. Approximately twenty water utilities have implemented an EWQMS by interfacing commercial or in-house software optimization programs with existing control systems. For utilities with an installed EWQMS, operating cost savings of 8-15% have been reported due to higher use of cheaper tariff periods and better operating efficiencies, resulting in the reduction in energy consumption of ∼6-9%. This review provides the current state-of-knowledge on EWQMS typical structural features and operational strategies and benefits and drawbacks are analyzed. The review also highlights the challenges encountered during installation and implementation of EWQMS and identifies the knowledge gaps that should motivate new research efforts. Copyright © 2015 Elsevier Ltd. All rights reserved.

Lessons Learned from the Node 1 Temperature and Humidity Control Subsystem Design

NASA Technical Reports Server (NTRS)

Williams, David E.

2010-01-01

Node 1 flew to the International Space Station (ISS) on Flight 2A during December 1998. To date the National Aeronautics and Space Administration (NASA) has learned a lot of lessons from this module based on its history of approximately two years of acceptance testing on the ground and currently its twelve years on-orbit. This paper will provide an overview of the ISS Environmental Control and Life Support (ECLS) design of the Node 1 Temperature and Humidity Control (THC) subsystem and it will document some of the lessons that have been learned to date for this subsystem and it will document some of the lessons that have been learned to date for these subsystems based on problems prelaunch, problems encountered on-orbit, and operational problems/concerns. It is hoped that documenting these lessons learned from ISS will help in preventing them in future Programs. 1

Plagiarism Detection by Online Solutions.

PubMed

Masic, Izet; Begic, Edin; Dobraca, Amra

2017-01-01

The problem of plagiarism represents one of the burning issues of the modern scientific world. Detection of plagiarism is a problem that the Editorial Board encounters in their daily work. Software solutions represent a good solution for the detection of plagiarism. The problem of plagiarism will become most discussed topic of the modern scientific world, especially due to the development of standard measures, which rank the work of one author. Investment in education, education of young research personnel about the importance of scientific research, with paying particular attention on ethical behavior, becomes an imperative of academic staff. Editors have to invest additional effort in the development of the base of reviewers team as well as in their proper guidance, because after all, despite the software solutions, they are the best weapon to fight plagiarism. Peer review process should be a key of successful operation of each journal.

A report on SHARP (Spacecraft Health Automated Reasoning Prototype) and the Voyager Neptune encounter

NASA Technical Reports Server (NTRS)

Martin, R. G. (Editor); Atkinson, D. J.; James, M. L.; Lawson, D. L.; Porta, H. J.

1990-01-01

The development and application of the Spacecraft Health Automated Reasoning Prototype (SHARP) for the operations of the telecommunications systems and link analysis functions in Voyager mission operations are presented. An overview is provided of the design and functional description of the SHARP system as it was applied to Voyager. Some of the current problems and motivations for automation in real-time mission operations are discussed, as are the specific solutions that SHARP provides. The application of SHARP to Voyager telecommunications had the goal of being a proof-of-capability demonstration of artificial intelligence as applied to the problem of real-time monitoring functions in planetary mission operations. AS part of achieving this central goal, the SHARP application effort was also required to address the issue of the design of an appropriate software system architecture for a ground-based, highly automated spacecraft monitoring system for mission operations, including methods for: (1) embedding a knowledge-based expert system for fault detection, isolation, and recovery within this architecture; (2) acquiring, managing, and fusing the multiple sources of information used by operations personnel; and (3) providing information-rich displays to human operators who need to exercise the capabilities of the automated system. In this regard, SHARP has provided an excellent example of how advanced artificial intelligence techniques can be smoothly integrated with a variety of conventionally programmed software modules, as well as guidance and solutions for many questions about automation in mission operations.

Analysis of the Problems Encountered in Education of Teachers and Solution Recommendations in Accordance with the Opinions of Faculty of Education Students

ERIC Educational Resources Information Center

Sahan, Gülsün

2016-01-01

The purpose of this study is to put forth the problems encountered in education of teachers and solution recommendations in accordance with the opinions of faculty of education students. Within this framework, the opinions of 182 first grade students from the departments of classroom, social sciences, science and mathematics teaching at Bartin…

Convectively Induced Turbulence Encountered During NASA's Fall-2000 Flight Experiments

NASA Technical Reports Server (NTRS)

Hamilton, David W.; Proctor, Fred H.

2002-01-01

Aircraft encounters with atmospheric turbulence are a leading cause of in-flight injuries aboard commercial airliners and cost the airlines millions of dollars each year. Most of these injuries are due to encounters with turbulence in and around convection. In a recent study of 44 turbulence accident reports between 1990 and 1996, 82% of the cases were found to be near or within convective activity (Kaplan et al. 1999). According to NTSB accident reports, pilots' descriptions of these turbulence encounters include 'abrupt', 'in Instrument Meteorological Conditions (IMC)', 'saw nothing on the weather radar', and 'the encounter occurred while deviating around' convective activity. Though the FAA has provided guidelines for aircraft operating in convective environments, turbulence detection capability could decrease the number of injuries by alerting pilots of a potential encounter. The National Aeronautics and Space Administration, through its Aviation Safety Program, is addressing turbulence hazards through research, flight experiments, and data analysis. Primary focus of this program element is the characterization of turbulence and its environment, as well as the development and testing of hazard estimation algorithms for both radar and in situ detection. The ultimate goal is to operationally test sensors that will provide ample warning prior to hazardous turbulence encounters. In order to collect data for support of these activities, NASA-Langley's B-757 research aircraft was directed into regions favorable for convectively induced turbulence (CIT). On these flights, the airborne predictive wind shear (PWS) radar, augmented with algorithms designed for turbulence detection, was operated in real time to test this capability. In this paper, we present the results of two research flights when turbulence was encountered. Described is an overview of the flights, the general radar performance, and details of four encounters with severe turbulence.

The work of nurses in Australian general practice: A national survey.

PubMed

Joyce, Catherine M; Piterman, Leon

2011-01-01

Following recent reforms to Australia's health system, nurses now comprise a significant and growing sector of the Australian primary care workforce, but there is little data describing the services they provide. This study aimed to describe the patient consultations of nurses in Australian general practice, including patient characteristics, reasons for the consultation, treatments provided and other actions taken. The study was a national cross-sectional survey, with each participating nurse collecting information about 50 nurse-patient encounters. General practice settings in all regions of Australia. 108 nurses volunteered in response to advertisements and 104 returned completed study materials. Participants included Registered (Division 1) and Enrolled (Division 2) nurses working in a general practice setting. Data were collected between May 2007 and May 2008 using a profile questionnaire and a series of encounter forms. Information was gathered on reasons for encounter, patient characteristics, and actions taken. Data were classified using the International Classification of Primary Care. The final data set included 5,253 nurse-patient encounters. 37.2% of patients (95% CI 33.3-41.2) were aged 65 and over, and 57.1% were female (95% CI 54.9-59.5). The majority of encounters (90.7%) were with existing patients of the practice (95% CI 89.1-92.7). The most common reasons for encounter were general and unspecified problems (35.4 per 100 encounters; 95% CI 31.8-39.1), followed by skin-related problems (20.0; 95% CI 17.3-22.8), and cardiovascular problems (11.0; 95% CI 8.7-13.3). Common management actions included medical examinations (20.7 per 100 encounters), immunisations (22.5), diagnostic tests (10.6), and dressings (15.8). Approximately 30% of encounters involved advice-giving. The findings confirm the generalist nature of the General Practice Nurse role, with a wide range of patient types and clinical conditions. There is a clear influence of current funding and organisational arrangements on work patterns, with tasks that have specific funding (including immunisations and wound care) featuring prominently in nurses' work. Whilst nurses' rates for presenting conditions were similar to doctors at a general level, specific actions taken and problems managed differed. New policy reforms in Australia are supporting greater flexibility in the General Practice Nurse role, maximising efficient use of nurses' skills in the primary health care context. Copyright © 2010 Elsevier Ltd. All rights reserved.

The positive impact of structured teaching in the operating room.

PubMed

Leung, Yee; Salfinger, Stuart; Mercer, Annette

2015-12-01

A survey of obstetric and gynaecology trainees in Australia found the trainee's opinion of the consultants' teaching ability for laparoscopic procedures and procedures dealing with complications as 'poor' in 21.2% and 23.4% of responses, respectively (Aust NZ J Obstet Gynaecol 2009; 49: 84). Surgical caseload per trainee is falling for a variety of reasons. Strategies need to be adopted to enhance the surgical learning experience of trainees in the operating room. We describe the use of a structured encounter template to facilitate the teaching of surgery in the operating room and report the response of the trainees to this intervention. Trainees attached to a gynaecologic surgery unit all underwent surgical training using a set format based on the surgical encounter template, including briefing, goal setting and intra-operative teaching aims as well as debriefing. Data on the trainees' experience and perception of their learning experience were then collected and analysed as quantitative and qualitative data sets. The trainees reported satisfaction with the use of a structured encounter template to facilitate the surgical teaching in the operating room. Some trainees had not received such clarity of feedback or the opportunity to complete a procedure independently prior to using the structured encounter template. A structured surgical encounter template based on andragogy principles to focus consultant teaching in the operating room is highly acceptable to obstetric and gynaecology trainees in Australia. Allowing the trainee the opportunity to set objectives and receive feedback empowers the trainee and enhances their educational experience. © 2015 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

Determining problems experienced by student nurses in their work with clinical educators in Turkey.

PubMed

Elcigil, Ayfer; Yildirim Sari, Hatice

2007-07-01

Clinical education is considered an indispensable and vital part of nursing education. Educators have an important role in the successful completion of a student's clinical education. The clinical educator's approach, experience and knowledge have an influence on the students. Students encounter certain problems during their clinical practice under the supervision of educators. This study was conducted to determine the nature of the problems student nurses encounter during clinical training in Turkey. The focus-group interviews were used for this study. Three groups of 8, a total group of 24, composed of students completing their third year were included in the interviews. The students in this study had completed their practical training in the departments of internal medicine, surgery, pediatrics, psychiatry and public health. Among the problems mostly encountered by students, as established by the study, were inadequate assessment by the clinical educator, judgment, negative feedback, communication problems, inadequate guidance and overload. At the end of the research, recommendations were that educators should offer information in the direction of student expectations, increase their positive feedback and lighten the academic workload of these students.

Adjustment method for embedded metrology engine in an EM773 series microcontroller.

PubMed

Blazinšek, Iztok; Kotnik, Bojan; Chowdhury, Amor; Kačič, Zdravko

2015-09-01

This paper presents the problems of implementation and adjustment (calibration) of a metrology engine embedded in NXP's EM773 series microcontroller. The metrology engine is used in a smart metering application to collect data about energy utilization and is controlled with the use of metrology engine adjustment (calibration) parameters. The aim of this research is to develop a method which would enable the operators to find and verify the optimum parameters which would ensure the best possible accuracy. Properly adjusted (calibrated) metrology engines can then be used as a base for variety of products used in smart and intelligent environments. This paper focuses on the problems encountered in the development, partial automatisation, implementation and verification of this method. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Two year operational experience with the TPS vacuum system

NASA Astrophysics Data System (ADS)

Yang, Y. C.; Chan, C. K.; Sheng, I. C.; Huang, I. T.; Y Chung, J.; Liang, C. C.

2017-07-01

The Taiwan Photon Source (TPS), a 3-GeV third generation synchrotron light source, was commissioned in 2014 December and is now currently operated in top-up mode at 300mA for users. During the past two years, the machine was completed to meet design goals with among others the installation of superconducting cavities (SRF), the installation of insertion devices (ID) and the correction of vacuum chamber structure downstream from the IDs. The design goal of 500mA beam current was achieved with a total accumulated beam dose of more than 1000Ah, resulting in three orders of magnitude reduction of out-gassing. As the beam current was increased, a few vacuum problems were encountered, including vacuum leaks, unexpected pressure bursts, etc. Vacuum related issues including high pressure events, lessons learned and operational experience will be presented and discussed in this paper.

Utility experience with two demonstration wind turbine generators

NASA Astrophysics Data System (ADS)

Wehrey, M. C.

Edison has committed 360 MW of nameplate generating capacity to wind energy by year 1990 in its long-range generation plan. To reach this goal the Company's wind energy program focuses on three areas: the continuous evaluation of the wind resource, the hands-on demonstration of wind turbine generators (WTG) and an association with wind park developers. Two demonstration WTGs have been installed and operated at Edison's Wind Energy Center near Palm Springs, California: a 3 MW horizontal axis Bendix/Schachle WTG and a 500 kW vertical axis Alcoa WTG. They are part of a one to two year test program during which the performance of the WTGs will be evaluated, their system operation and environmental impact will be assessed and the design criteria of future WTGs will be identified. Edison's experience with these two WTGs is summarized and the problems encountered with the operation of the two machines are discussed.

Utility experience with two demonstration wind turbine generators

NASA Technical Reports Server (NTRS)

Wehrey, M. C.

1982-01-01

Edison has committed 360 MW of nameplate generating capacity to wind energy by year 1990 in its long-range generation plan. To reach this goal the Company's wind energy program focuses on three areas: the continuous evaluation of the wind resource, the hands-on demonstration of wind turbine generators (WTG) and an association with wind park developers. Two demonstration WTGs have been installed and operated at Edison's Wind Energy Center near Palm Springs, California: a 3 MW horizontal axis Bendix/Schachle WTG and a 500 kW vertical axis Alcoa WTG. They are part of a one to two year test program during which the performance of the WTGs will be evaluated, their system operation and environmental impact will be assessed and the design criteria of future WTGs will be identified. Edison's experience with these two WTGs is summarized and the problems encountered with the operation of the two machines are discussed.

Superradiant effects on pulse propagation in resonant media. [atomic excitations/coherent radiation - operators (mathematics)/matrices (mathematics)

NASA Technical Reports Server (NTRS)

Lee, C.

1975-01-01

Adopting the so-called genealogical construction, the eigenstates of collective operators can be expressed corresponding to a specified mode for an N-atom system in terms of those for an (N-1)-atom system. Matrix element of a collective operator of an arbitrary mode is presented which can be written as the product of an m-dependent factor and an m-independent reduced matrix element (RME). A set of recursion formulas for the RME was obtained. A graphical representation of the RME on the branching diagram for binary irreducible representations of permutation groups was then introduced. This gave a simple and systematic way of calculating the RME. Results show explicitly the geometry dependence of superradiance and the relative importance of r-conserving and r-nonconserving processes and clears up the chief difficulty encounted in the problem of N two-level atoms, spread over large regions, interacting with a multimode radiation field.

The Library and Human Memory. Final Report on Mechanized Information Services in the University Library, Phase I - Planning. Part 13.

ERIC Educational Resources Information Center

Norman, Donald A.

This paper discusses the differences between the storage problems encountered in a large library and those encountered in the human memory. Some of the properties of the human memory system and some of the major issues which affect the interaction between human users and the existing library systems are outlined. The problem of browsing is used as…

Consolidation of Contingency Data and Its Use in Computer Graphics to Plan Bare Base Facility Construction at a Forward Operating Location.

DTIC Science & Technology

1983-09-01

34 o D Qa. : "lo °%S .. " ig.22. aveQuitComand P L %S dU a a Troubleshooting There are several potential problems that the user may encounter when...34 Air Force Civil Engineer, Vol. 3, No. 3 (August 1962 ), pp. 6-7. 40. Roberts, Captain Mike. "Automated Drafting and Design for the Base Civil Engineer... Eglin AFB FL, undated. 216 . - ,. ° - . .. . . .. r! 57. . Explosive Safety Standards. AFR 127-100. Chapter 5: Principles and Application of Explo- sive

Ink-jet printing of silver metallization for photovoltaics

NASA Technical Reports Server (NTRS)

Vest, R. W.

1986-01-01

The status of the ink-jet printing program at Purdue University is described. The drop-on-demand printing system was modified to use metallo-organic decomposition (MOD) inks. Also, an IBM AT computer was integrated into the ink-jet printer system to provide operational functions and contact pattern configuration. The integration of the ink-jet printing system, problems encountered, and solutions derived were described in detail. The status of ink-jet printing using a MOD ink was discussed. The ink contained silver neodecanate and bismuth 2-ethylhexanoate dissolved in toluene; the MOD ink decomposition products being 99 wt% AG, and 1 wt% Bi.

Thermal and mechanical treatments for nickel and some nickel-base alloys: Effects on mechanical properties

NASA Technical Reports Server (NTRS)

Hall, A. M.; Beuhring, V. F.

1972-01-01

This report deals with heat treating and working nickel and nickel-base alloys, and with the effects of these operations on the mechanical properties of the materials. The subjects covered are annealing, solution treating, stress relieving, stress equalizing, age hardening, hot working, cold working, combinations of working and heat treating (often referred to as thermomechanical treating), and properties of the materials at various temperatures. The equipment and procedures used in working the materials are discussed, along with the common problems that may be encountered and the precautions and corrective measures that are available.

Development of a prototype interactive learning system using multi-media technology for mission independent training program

NASA Technical Reports Server (NTRS)

Matson, Jack E.

1992-01-01

The Spacelab Mission Independent Training Program provides an overview of payload operations. Most of the training material is currently presented in workbook form with some lecture sessions to supplement selected topics. The goal of this project was to develop a prototype interactive learning system for one of the Mission Independent Training topics to demonstrate how the learning process can be improved by incorporating multi-media technology into an interactive system. This report documents the development process and some of the problems encountered during the analysis, design, and production phases of this system.

Apollo experience report: Lunar module communications system

NASA Technical Reports Server (NTRS)

Dietz, R. H.; Rhoades, D. E.; Davidson, L. J.

1972-01-01

The development of the lunar module communications system is traced from the initial concept to the operational system used on manned lunar missions. The problems encountered during the development, the corrective actions taken, and recommendations for similar equipment in future programs are included. The system was designed to provide communications between the lunar module and the manned space flight network, between the lunar module and the command and service module, and between the lunar module and the extravehicular crewmen. The system provided the equipment necessary for voice, telemetry, and television communications; ranging information; and various communications links.

Medical survey of European astronauts during Mir missions

NASA Astrophysics Data System (ADS)

Clément, G.; Hamilton, D.; Davenport, L.; Comet, B.

2010-10-01

This paper reviews the medical operations performed on six European astronauts during seven space missions on board the space station Mir. These missions took place between November 1988 and August 1999, and their duration ranged from 14 days to 189 days. Steps of pre-flight medical selection and flight certification are presented. Countermeasures program used during the flight, as well as rehabilitation program following short and long-duration missions are described. Also reviewed are medical problems encountered during the flight, post-flight physiological changes such as orthostatic intolerance, exercise capacity, blood composition, muscle atrophy, bone density, and radiation exposure.

Metal Coatings

NASA Technical Reports Server (NTRS)

1994-01-01

During the Apollo Program, General Magnaplate Corporation developed process techniques for bonding dry lubricant coatings to space metals. The coatings were not susceptible to outgassing and offered enhanced surface hardness and superior resistance to corrosion and wear. This development was necessary because conventional lubrication processes were inadequate for lightweight materials used in Apollo components. General Magnaplate built on the original technology and became a leader in development of high performance metallurgical surface enhancement coatings - "synergistic" coatings, - which are used in applications from pizza making to laser manufacture. Each of the coatings is designed to protect a specific metal or group of metals to solve problems encountered under operating conditions.

Outcomes of planetary close encounters - A systematic comparison of methodologies

NASA Technical Reports Server (NTRS)

Greenberg, Richard; Carusi, Andrea; Valsecchi, G. B.

1988-01-01

Several methods for estimating the outcomes of close planetary encounters are compared on the basis of the numerical integration of a range of encounter types. An attempt is made to lay the foundation for the development of predictive rules concerning the encounter outcomes applicable to the refinement of the statistical mechanics that apply to planet-formation and similar problems concerning planetary swarms. Attention is given to Oepik's (1976) formulation of the two-body approximation, whose predicted motion differs from the correct three-body behavior.

Accuracy Considerations in Sterile Compounding.

PubMed

Akers, Michael J

2017-01-01

Published information about the accuracy of filling and closing operations of sterile products is limited and guidelines on the topic are very general. This article highlights the basic principles in sterile-product filling of syringes and vials. Also covered in this article are descriptions of some of the available devices for filling containers, a brief discussion of the advances in vial and syringe filling, a discussion on the advantages and disadvantages of sterile product filling methods, and a discussion on possible problems encountered during filling operations. Because of the extremely high costs of some new drugs, especially biopharmaceuticals, compounding pharmacies may prefer to fill small batches to reduce the risk of unacceptable monetary losses in the event of a manufacturing deviation that results in batch rejection. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Virtual Environment Computer Simulations to Support Human Factors Engineering and Operations Analysis for the RLV Program

NASA Technical Reports Server (NTRS)

Lunsford, Myrtis Leigh

1998-01-01

The Army-NASA Virtual Innovations Laboratory (ANVIL) was recently created to provide virtual reality tools for performing Human Engineering and operations analysis for both NASA and the Army. The author's summer research project consisted of developing and refining these tools for NASA's Reusable Launch Vehicle (RLV) program. Several general simulations were developed for use by the ANVIL for the evaluation of the X34 Engine Changeout procedure. These simulations were developed with the software tool dVISE 4.0.0 produced by Division Inc. All software was run on an SGI Indigo2 High Impact. This paper describes the simulations, various problems encountered with the simulations, other summer activities, and possible work for the future. We first begin with a brief description of virtual reality systems.

Design and fabrication of a fixed-bed batch type pyrolysis reactor for pilot scale pyrolytic oil production in Bangladesh

NASA Astrophysics Data System (ADS)

Aziz, Mohammad Abdul; Al-khulaidi, Rami Ali; Rashid, MM; Islam, M. R.; Rashid, MAN

2017-03-01

In this research, a development and performance test of a fixed-bed batch type pyrolysis reactor for pilot scale pyrolysis oil production was successfully completed. The characteristics of the pyrolysis oil were compared to other experimental results. A solid horizontal condenser, a burner for furnace heating and a reactor shield were designed. Due to the pilot scale pyrolytic oil production encountered numerous problems during the plant’s operation. This fixed-bed batch type pyrolysis reactor method will demonstrate the energy saving concept of solid waste tire by creating energy stability. From this experiment, product yields (wt. %) for liquid or pyrolytic oil were 49%, char 38.3 % and pyrolytic gas 12.7% with an operation running time of 185 minutes.

Neural net controller for inlet pressure control of rocket engine testing

NASA Technical Reports Server (NTRS)

Trevino, Luis C.

1994-01-01

Many dynamic systems operate in select operating regions, each exhibiting characteristic modes of behavior. It is traditional to employ standard adjustable gain proportional-integral-derivative (PID) loops in such systems where no apriori model information is available. However, for controlling inlet pressure for rocket engine testing, problems in fine tuning, disturbance accommodation, and control gains for new profile operating regions (for research and development) are typically encountered. Because of the capability of capturing I/O peculiarities, using NETS, a back propagation trained neural network is specified. For select operating regions, the neural network controller is simulated to be as robust as the PID controller. For a comparative analysis, the higher order moment neural array (HOMNA) method is used to specify a second neural controller by extracting critical exemplars from the I/O data set. Furthermore, using the critical exemplars from the HOMNA method, a third neural controller is developed using NETS back propagation algorithm. All controllers are benchmarked against each other.

Verification Test of Automated Robotic Assembly of Space Truss Structures

NASA Technical Reports Server (NTRS)

Rhodes, Marvin D.; Will, Ralph W.; Quach, Cuong C.

1995-01-01

A multidisciplinary program has been conducted at the Langley Research Center to develop operational procedures for supervised autonomous assembly of truss structures suitable for large-aperture antennas. The hardware and operations required to assemble a 102-member tetrahedral truss and attach 12 hexagonal panels were developed and evaluated. A brute-force automation approach was used to develop baseline assembly hardware and software techniques. However, as the system matured and operations were proven, upgrades were incorporated and assessed against the baseline test results. These upgrades included the use of distributed microprocessors to control dedicated end-effector operations, machine vision guidance for strut installation, and the use of an expert system-based executive-control program. This paper summarizes the developmental phases of the program, the results of several assembly tests, and a series of proposed enhancements. No problems that would preclude automated in-space assembly or truss structures have been encountered. The test system was developed at a breadboard level and continued development at an enhanced level is warranted.

Optical navigation during the Voyager Neptune encounter

NASA Technical Reports Server (NTRS)

Riedel, J. E.; Owen, W. M., Jr.; Stuve, J. A.; Synnott, S. P.; Vaughan, R. M.

1990-01-01

Optical navigation techniques were required to successfully complete the planetary exploration phase of the NASA deep-space Voyager mission. The last of Voyager's planetary encounters, with Neptune, posed unique problems from an optical navigation standpoint. In this paper we briefly review general aspects of the optical navigation process as practiced during the Voyager mission, and discuss in detail particular features of the Neptune encounter which affected optical navigation. New approaches to the centerfinding problem were developed for both stars and extended bodies, and these are described. Results of the optical navigation data analysis are presented, as well as a description of the optical orbit determination system and results of its use during encounter. Partially as a result of the optical navigation processing, results of scientific significance were obtained. These results include the discovery and orbit determination of several new satellites of Neptune and the determination of the size of Triton, Neptune's largest moon.

Geothermal observation wells, Mt. Hood, Oregon. Final report, October 4, 1977-July 9, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covert, W.F.; Meyer, H.J.

1979-11-01

Exploration drilling operations were conducted which included the deepening of an existing hole, designated as Old Maid Flat No. 1, from 1850 ft (564 m) to 4002 (1220 m) on the western approaches to Mt. Hood and the drilling of three new holes ranging from 940 ft (287 m) to 1340 ft (409 m). The Clear Fork hole, located in Old Maid Flat, was drilled to 1320 ft (402 m). The Zigzag hole was drilled to 940 ft (287 m) at the southwestern base of Mt. Hood in the Zigzag River valley. The remaining hole was drilled on the Timberlinemore » Lodge grounds which is on the south flank of Mt. Hood at an elevation of about 6000 ft (1829 m) above sea level. The deepening project designated as Old Maid Flat No. 1 encountered a maximum bottom hole temperature of about 180/sup 0/F (82/sup 0/C) and is to this date the deepest exploratory hole in the Mt. Hood vicinity. No significant drilling problems were encountered. The Clear Fork and Zigzag River holes were completed without significant problems. The Timberline Lodge hole encountered severe drilling conditions, including unconsolidated formations. Two strings of tools were left in the hole from structural collapse of the hole. The hole was scheduled as a 2000 ft (610 m) test. Drilling did not proceed beyond 1350 ft (412 m) and due to junk it was unobstructed to a depth of 838 ft (255 m). Observation pipe was installed to 735 ft (224 m) due to further disintegration of the hole. The work was prematurely terminated due to weather conditions.« less

The laser interferometer skin-friction meter - A numerical and experimental study

NASA Technical Reports Server (NTRS)

Murphy, J. D.; Westphal, R. V.

1986-01-01

Limits to the applicability of thin-film lubrication theory are established. The following two problems are considered: (1) the response of the oil film to a time-varying skin friction such as is encountered in turbulent boundary layers, and (2) a 'surface-wave instability' encountered at high skin-friction levels. Results corresponding to the first problem reveal that the laser interferometer skin-friction meter may, in principle, be applied to the measurement of instantaneous skin friction. In addressing the second problem, it is shown that the observed surface waves are not the result of a hydrodynamic instability.

Physical activity problem-solving inventory for adolescents: Development and initial validation

USDA-ARS?s Scientific Manuscript database

Youth encounter physical activity barriers, often called problems. The purpose of problem-solving is to generate solutions to overcome the barriers. Enhancing problem-solving ability may enable youth to be more physically active. Therefore, a method for reliably assessing physical activity problem-s...

Lessons Learned from Daily Uplink Operations during the Deep Impact Mission

NASA Technical Reports Server (NTRS)

Stehly, Joseph S.

2006-01-01

The daily preparation of uplink products (commands and files) for Deep Impact was as problematic as the final encounter images were spectacular. The operations team was faced with many challenges during the six-month mission to comet Tempel One of the biggest difficulties was that the Deep Impact Flyby and Impactor vehicles necessitated a high volume of uplink products while also utilizing a new uplink file transfer capability. The Jet Propulsion Laboratory (JPL) Multi-Mission Ground Systems and Services (MGSS) Mission Planning and Sequence Team (MPST) had the responsibility of preparing the uplink products for use on the two spacecraft. These responsibilities included processing nearly 15,000 flight products, modeling the states of the spacecraft during all activities for subsystem review, and ensuring that the proper commands and files were uplinked to the spacecraft. To guarantee this transpired and the health and safety of the two spacecraft were not jeopardized several new ground scripts and procedures were developed while the Deep Impact Flyby and Impactor spacecraft were en route to their encounter with Tempel-1. These scripts underwent several adaptations throughout the entire mission up until three days before the separation of the Flyby and Impactor vehicles. The problems presented by Deep Impact's daily operations and the development of scripts and procedures to ease those challenges resulted in several valuable lessons learned. These lessons are now being integrated into the design of current and future MGSS missions at JPL.

Nurses' perceptions and problems in the usability of a medication safety app.

PubMed

Ankem, Kalyani; Cho, Sookyung; Simpson, Diana

2017-10-16

The majority of medication apps support medication adherence. Equally, if not more important, is medication safety. Few apps report on medication safety, and fewer studies have been conducted with these apps. The usability of a medication safety app was tested with nurses to reveal their perceptions of the graphical user interface and to discover problems they encountered in using the app. Usability testing of the app was conducted with RN-BSN students and informatics students (n = 18). Perceptions of the graphical components were gathered in pretest and posttest questionnaires, and video recordings of the usability testing were transcribed. The significance of the difference in mean performance time for 8 tasks was tested, and qualitative analysis was deployed to identify problems encountered and to rate the severity of each problem. While all participants perceived the graphical user interface as easy to understand, nurses took significantly more time to complete certain tasks. More nurses found the medication app to be lacking in intuitiveness of user interface design, in capability to match real-world data, and in providing optimal information architecture. To successfully integrate mobile devices in healthcare, developers must address the problems that nurses encountered in use of the app.

Active Vibration Control of Hydrodynamic Journal Bearings

NASA Astrophysics Data System (ADS)

Tůma, J.; Šimek, J.; Škuta, J.; Los, J.; Zavadil, J.

Rotor instability is one of the most serious problems of high-speed rotors supported by sliding bearings. With constantly increasing parameters, new machines problems with rotor instability are encountered more and more often. Even though there are many solutions based on passive improvement of the bearing geometry to enlarge the operational speed range of the journal bearing, the paper deals with a working prototype of a system for the active vibration control of journal bearings with the use of piezoactuators. The actively controlled journal bearing consists of a movable bushing, which is actuated by two piezoactuators. It is assumed that the journal vibration is measured by a pair of proximity probes. Force produced by piezoactuators and acting at the bushing is controlled according to error signals derived from the proximity probe output signals. The active vibration control was tested with the use of a test rig, which consists of a rotor supported by two controllable journal bearings and driven by an inductive motor up to 23,000 rpm. As it was proved by experiments the active vibration control extends considerably the range of the rotor operational speed.

Development of a Work Control System for Propulsion Testing at NASA Stennis

NASA Technical Reports Server (NTRS)

Messer, Elizabeth A.

2005-01-01

This paper will explain the requirements and steps taken to develop the current Propulsion Test Directorate electronic work control system for Test Operations. The PTD Work Control System includes work authorization and technical instruction documents, such as test preparation sheets, discrepancy reports, test requests, pre-test briefing reports, and other test operations supporting tools. The environment that existed in the E-Complex test areas in the late 1990's was one of enormous growth which brought people of diverse backgrounds together for the sole purpose of testing propulsion hardware. The problem that faced us was that these newly formed teams did not have a consistent and clearly understood method for writing, performing or verifying work. A paper system was developed that would allow the teams to use the same forms, but this still presented problems in the large amount of errors occurring, such as lost paperwork and inconsistent implementation. In a sampling of errors in August 1999, the paper work control system encountered 250 errors out of 230 documents released and completed, for an error rate of 111%.

Automation in the graphic arts

NASA Astrophysics Data System (ADS)

Truszkowski, Walt

1995-04-01

The CHIMES (Computer-Human Interaction Models) tool was designed to help solve a simply-stated but important problem, i.e., the problem of generating a user interface to a system that complies with established human factors standards and guidelines. Though designed for use in a fairly restricted user domain, i.e., spacecraft mission operations, the CHIMES system is essentially domain independent and applicable wherever graphical user interfaces of displays are to be encountered. The CHIMES philosophy and operating strategy are quite simple. Instead of requiring a human designer to actively maintain in his or her head the now encyclopedic knowledge that human factors and user interface specialists have evolved, CHIMES incorporates this information in its knowledge bases. When directed to evaluated a design, CHIMES determines and accesses the appropriate knowledge, performs an evaluation of the design against that information, determines whether the design is compliant with the selected guidelines and suggests corrective actions if deviations from guidelines are discovered. This paper will provide an overview of the capabilities of the current CHIMES tool and discuss the potential integration of CHIMES-like technology in automated graphic arts systems.

Cockpit data management

NASA Technical Reports Server (NTRS)

Groce, J. L.; Boucek, G. P.

1988-01-01

This study is a continuation of an FAA effort to alleviate the growing problems of assimilating and managing the flow of data and flight related information in the air transport flight deck. The nature and extent of known pilot interface problems arising from new NAS data management programs were determined by a comparative timeline analysis of crew tasking requirements. A baseline of crew tasking requirements was established for conventional and advanced flight decks operating in the current NAS environment and then compared to the requirements for operation in a future NAS environment emphasizing Mode-S data link and TCAS. Results showed that a CDU-based pilot interface for Mode-S data link substantially increased crew visual activity as compared to the baseline. It was concluded that alternative means of crew interface should be available during high visual workload phases of flight. Results for TCAS implementation showed substantial visual and motor tasking increases, and that there was little available time between crew tasks during a TCAS encounter. It was concluded that additional research should be undertaken to address issues of ATC coordination and the relative benefit of high workload TCAS features.

Tibial plafond fractures: limited incision reduction with percutaneous fixation.

PubMed

Salton, Heather L; Rush, Shannon; Schuberth, John

2007-01-01

This study was a retrospective review of 18 patients with 19 pilon fractures treated with limited incision reduction and percutaneous plate fixation of the tibia. Patients were treated with either a 1- or 2-stage protocol. The latter consisted of placement of an external fixator followed by definitive reduction. The emphasis of analysis was placed on the identification of complications to the soft tissue envelope or bone-healing problems within the first 6 months after surgery. A major complication was defined as an unplanned operation within the first 6 months. Minor complications were any superficial wound defects that did not require operative intervention to resolve or any malunion or delayed union. With this protocol, no major complications were encountered. Minor complications were identified in 4 patients (4 fractures) of which 2 were minor wound problems. One patient developed a malunion, and the other had a delayed union. Four patients requested removal of prominent hardware. These results indicate that limited incision reduction and percutaneous plate fixation lead to safe methods of stabilization. The authors also provide guidance and strategies for the consistent execution of this technique.

A LEAST ABSOLUTE SHRINKAGE AND SELECTION OPERATOR (LASSO) FOR NONLINEAR SYSTEM IDENTIFICATION

NASA Technical Reports Server (NTRS)

Kukreja, Sunil L.; Lofberg, Johan; Brenner, Martin J.

2006-01-01

Identification of parametric nonlinear models involves estimating unknown parameters and detecting its underlying structure. Structure computation is concerned with selecting a subset of parameters to give a parsimonious description of the system which may afford greater insight into the functionality of the system or a simpler controller design. In this study, a least absolute shrinkage and selection operator (LASSO) technique is investigated for computing efficient model descriptions of nonlinear systems. The LASSO minimises the residual sum of squares by the addition of a 1 penalty term on the parameter vector of the traditional 2 minimisation problem. Its use for structure detection is a natural extension of this constrained minimisation approach to pseudolinear regression problems which produces some model parameters that are exactly zero and, therefore, yields a parsimonious system description. The performance of this LASSO structure detection method was evaluated by using it to estimate the structure of a nonlinear polynomial model. Applicability of the method to more complex systems such as those encountered in aerospace applications was shown by identifying a parsimonious system description of the F/A-18 Active Aeroelastic Wing using flight test data.

[Oganization of sanitary care organization in the 1st Infantry Battalion of the 7th Puma Brigade during offensive attacks at the Dinara Mountain in the Winter 94 operation].

PubMed

Pigac, Biserka; Kretić, Marijan; Vuković, Jurica

2006-09-01

The aim of this paper is to show sanitary care organization in the 1st infantry battalion of 7th Puma Brigade during attacks at the Dinara mountain in the Winter 94 operation, and to compare it with the general pattern described. The problems encountered and mistakes made in the medical care organization that were caused either by the lack of coordination between the command and military personnel or the lack of equipment, inadequate equipment, geographical characteristics of the area, communication problems, weather conditions or any other reason influencing sanitary care are presented. Based on the analysis of two cases, it is concluded that sanitary care was organizaed according to the echelon principles. During the war, medical care was satisfactory in spite of all the problems and shortcomings, mainly owing to the young, brave and enthusiastic command and medical personnel. Medical care in the Croatian Army during the war was an integral part of the military-civilian health care system. Despite rather common problems and deficiencies, the achievements in taking care of the wounded and sick persons were satisfactory, all the wounded men were properly managed, functionally and cosmetically recovered, and capable of normal living and work. These results were especially gratifying since they were, in general, recorded in young men.

Operation of controls on consumer products by physically impaired users.

PubMed

Kanis, H

1993-06-01

The self-reliance of the physically impaired can be seriously jeopardized by their inability to operate everyday products, especially if both upper extremities are impaired. To determine the difficulties impaired users encounter in operating consumer product controls, on-site video recordings were made of subjects suffering from arthritis or a muscular disease. Subjects' force exertion was compared with that of a group of nonimpaired users. The resulting inventory allowed the analysis of the manipulation problems faced by impaired subjects and the development of design recommendations. In this study the force exerted by the subjects and that required to operate the controls were measured. A comparison of the results of these force measurements led to a number of conclusions. This study led to the following design recommendations: the amount of force required to operate controls should be kept as low as possible; the user should not be required to make two manipulations at the same time, such as simultaneously pushing and rotating a control device; pushing is preferable to rotating; and there should be a great degree of freedom to manipulate controls.

Measuring Actual eHealth Literacy Among Patients With Rheumatic Diseases: a Qualitative Analysis of Problems Encountered Using Health 1.0 and Health 2.0 Applications

PubMed Central

Drossaert, Constance HC; de Heus, Miriam; Taal, Erik; van de Laar, Mart AFJ

2013-01-01

Background The Internet offers diverse opportunities for disease management, through information websites (Health 1.0) and interactive applications such as peer support forums, online consults, and insight into electronic medical records (Health 2.0). However, various skills are required to benefit from Health 1.0 and Health 2.0 applications for one’s own health, known as eHealth literacy. Objective To study the eHealth literacy of patients with rheumatic diseases and the types of problems they encounter when using the Internet in relation to their disease. Methods In two studies, patients were asked about their current disease-related Internet use and their eHealth literacy was observed during performance tests. In study 1, 15 patients (aged 39-74) performed 6 information-retrieval tasks on the Internet (Health 1.0). In study 2, 16 patients (aged 24-72) performed 3 Health 2.0 tasks on a hospital-based online Web portal and 2 Health 2.0 tasks on interactive websites. Participants were asked to think aloud while performing the assignments, and screen activities were recorded. Types and frequency of problems were identified by 2 independent researchers and coded into categories using inductive analysis. Results Almost all patients in our studies had searched the Internet for information about rheumatic diseases in the past. Fewer patients had used Health 2.0 applications, but many were nevertheless enthusiastic about the possibilities from Health 2.0 applications after finishing the assignments. However, nearly all participants experienced difficulties, and a substantial number of participants were not able to complete all of the assignments. Encountered problems could be divided into 6 sequential categories: (1) operating the computer and Internet browser, (2) navigating and orientating on the Web, (3) utilizing search strategies, (4) evaluating relevance and reliability, (5) adding content to the Web, and (6) protecting and respecting privacy. Most severe difficulties occurred in levels 3 and 4—in formulating a search query, evaluating the source of the information, and in scanning a website for relevant information. Conclusions Many patients have insufficient skills to properly use Health 1.0 and Health 2.0. Formulating proper search strategies and evaluating the found information caused problems among the majority of patients. Concerning Health 2.0, use and awareness of these applications is low and patients should be guided in the use of them. Our findings may contribute to the awareness of patients’ eHealth literacy problems among health professionals, and stress the importance of usability guidelines in Web design. PMID:23399720

Sex of the GP--20 years on.

PubMed

Harrison, Christopher M; Britt, Helena C; Charles, Janice

2011-08-15

Previous research with the Australian Morbidity and Treatment Survey (1990-1991) showed significant differences in general practitioner characteristics and patient mix of male and female GPs. Even after adjusting for these, it was seen that male and female GPs managed different types of medical conditions. The proportion of female GPs increased from 19.6% in 1990-1991 to 37.1% in 2009-2010. This study investigates whether differences remain two decades later. Analysis of 2009-2010 Bettering the Evaluation and Care of Health (BEACH) data examining GP characteristics, patient encounter characteristics, patient reasons for encounter (RFE), problem types managed and management methods used, by GP sex. Whether GP sex was an independent predictor of problem types being managed, or management methods used, was tested using multiple logistic regressions and Poisson regression. 988 GPs recorded 98 800 GP-patient encounters. Adjusted differences in clinical activity of male and female GPs. After adjustment, compared with male GPs, females recorded more RFEs about general and unspecified issues and endocrine, female genital, pregnancy and family planning problems; and fewer concerning the musculoskeletal, respiratory, skin and male genital systems. Female GPs managed more general and unspecified, digestive, circulatory, psychological, endocrine, female genital and social problems; recorded nearly 20% more clinical treatments and referrals; recorded nearly 10% more imaging and pathology tests; and 4.3% fewer medications. After two decades, even with increased numbers of female GPs, the differences in problems managed by male and female GPs remain, and will probably continue. Female GPs use more resources per encounter, but may not use more resources in terms of annual patient care.

Near-Field Scanning Optical Microscopy of Soft, Biological, or Rough Objects in Aqueous Environment: Challenges and some Remedies to Circumvent

NASA Technical Reports Server (NTRS)

Vikram, C. S.; Witherow, W. K.

1999-01-01

Near-field scanning optical microscopy is an established technique for sub-wavelength spatial resolution in imaging, spectroscopy, material science, surface chemistry, polarimetry, etc. A significant amount of confidence has been established for thin hard specimens in air. However when soft, biological, rough, in aqueous environment object, or a combination is involved, the progress has been slow. The tip-sample mechanical interaction, heat effects to sample, drag effects to the probe, difficulty in controlling tip-sample separation in case of rough objects, light scattering from sample thickness, etc. create problems. Although these problems are not even fully understood, there have been attempts to study them with the aim of performing reliable operations. In this review we describe these attempts. Starting with general problems encountered, various effects like polarization, thermal, and media are covered. The roles of independent tip-sample distance control tools in the relevant situations are then described. Finally progress in fluid cell aspect has been summarized.

Faster PET reconstruction with a stochastic primal-dual hybrid gradient method

NASA Astrophysics Data System (ADS)

Ehrhardt, Matthias J.; Markiewicz, Pawel; Chambolle, Antonin; Richtárik, Peter; Schott, Jonathan; Schönlieb, Carola-Bibiane

2017-08-01

Image reconstruction in positron emission tomography (PET) is computationally challenging due to Poisson noise, constraints and potentially non-smooth priors-let alone the sheer size of the problem. An algorithm that can cope well with the first three of the aforementioned challenges is the primal-dual hybrid gradient algorithm (PDHG) studied by Chambolle and Pock in 2011. However, PDHG updates all variables in parallel and is therefore computationally demanding on the large problem sizes encountered with modern PET scanners where the number of dual variables easily exceeds 100 million. In this work, we numerically study the usage of SPDHG-a stochastic extension of PDHG-but is still guaranteed to converge to a solution of the deterministic optimization problem with similar rates as PDHG. Numerical results on a clinical data set show that by introducing randomization into PDHG, similar results as the deterministic algorithm can be achieved using only around 10 % of operator evaluations. Thus, making significant progress towards the feasibility of sophisticated mathematical models in a clinical setting.

Approximation algorithms for planning and control

NASA Technical Reports Server (NTRS)

Boddy, Mark; Dean, Thomas

1989-01-01

A control system operating in a complex environment will encounter a variety of different situations, with varying amounts of time available to respond to critical events. Ideally, such a control system will do the best possible with the time available. In other words, its responses should approximate those that would result from having unlimited time for computation, where the degree of the approximation depends on the amount of time it actually has. There exist approximation algorithms for a wide variety of problems. Unfortunately, the solution to any reasonably complex control problem will require solving several computationally intensive problems. Algorithms for successive approximation are a subclass of the class of anytime algorithms, algorithms that return answers for any amount of computation time, where the answers improve as more time is allotted. An architecture is described for allocating computation time to a set of anytime algorithms, based on expectations regarding the value of the answers they return. The architecture described is quite general, producing optimal schedules for a set of algorithms under widely varying conditions.

Vapor compression distillation module

NASA Technical Reports Server (NTRS)

Nuccio, P. P.

1975-01-01

A Vapor Compression Distillation (VCD) module was developed and evaluated as part of a Space Station Prototype (SSP) environmental control and life support system. The VCD module includes the waste tankage, pumps, post-treatment cells, automatic controls and fault detection instrumentation. Development problems were encountered with two components: the liquid pumps, and the waste tank and quantity gauge. Peristaltic pumps were selected instead of gear pumps, and a sub-program of materials and design optimization was undertaken leading to a projected life greater than 10,000 hours of continuous operation. A bladder tank was designed and built to contain the waste liquids and deliver it to the processor. A detrimental pressure pattern imposed upon the bladder by a force-operated quantity gauge was corrected by rearranging the force application, and design goals were achieved. System testing has demonstrated that all performance goals have been fulfilled.

Formal semantics for a subset of VHDL and its use in analysis of the FTPP scoreboard circuit

NASA Technical Reports Server (NTRS)

Bickford, Mark

1994-01-01

In the first part of the report, we give a detailed description of an operational semantics for a large subset of VHDL, the VHSIC Hardware Description Language. The semantics is written in the functional language Caliban, similar to Haskell, used by the theorem prover Clio. We also describe a translator from VHDL into Caliban semantics and give some examples of its use. In the second part of the report, we describe our experience in using the VHDL semantics to try to verify a large VHDL design. We were not able to complete the verification due to certain complexities of VHDL which we discuss. We propose a VHDL verification method that addresses the problems we encountered but which builds on the operational semantics described in the first part of the report.

The Mariner Mars 1971 radio frequency subsystem

NASA Technical Reports Server (NTRS)

Hughes, R. S.

1972-01-01

The radio frequency subsystem (RFS) for the Mariner Mars 1971 (MM'71) spacecraft is described. The MM'69 RFS was used as the baseline design for the MM'71 RFS, and the report describes the design changes made to the 1969 RFS for use on MM'71. It also cites various problems encountered during the fabrication and testing of the RFS, as well as the types of tests to which the RFS was subjected. In areas where significant problems were encountered, a detailed description of the problem and its solution is presented. In addition, some recommendations are given for modifications to the RFS and test techniques for future programs.

Development and testing of the infrared radiometer for the Mariner Venus/Mercury 1973 spacecraft

NASA Technical Reports Server (NTRS)

Clarke, T. C.

1975-01-01

The science objectives, development history, functional description, and testing of the Mariner Venus/Mercury 1973 infrared radiometer are discussed. Included in the functional description section is a thorough discussion of the IRR optical system, electronic operation, and thermal control. Signal development and its conversion to engineering units is traced, starting with the radiant space object, passing through the IRR optics and electronics, and culminating with data number development and interpretation. The test program section includes discussion of IRR calibration and alignment verification. Finally, the problems and failures encountered by the IRR during the period of its development and testing are reviewed.

Study of limitations and attributes of microprocessor testing techniques

NASA Technical Reports Server (NTRS)

Mccaskill, R.; Sohl, W. E.

1977-01-01

All microprocessor units have a similar architecture from which a basic test philosophy can be adopted and used to develop an approach to test each module separately in order to verify the functionality of each module within the device using the input/output pins of the device and its instruction set; test for destructive interaction between functional modules; and verify all timing, status information, and interrupt operations of the device. Block and test flow diagrams are given for the 8080, 8008, 2901, 6800, and 1802 microprocessors. Manufacturers are listed and problems encountered in testing the modules are discussed. Test equipment and methods are described.

High power, high frequency helix TWT's

NASA Astrophysics Data System (ADS)

Sloley, H. J.; Willard, J.; Paatz, S. R.; Keat, M. J.

The design and performance characteristics of a 34-GHz pulse tube capable of 75 W peak power output at 30 percent duty cycle and a broadband CW tube are presented. Particular attention is given to the engineering problems encountered during the development of the tubes, including the suppression of backward wave oscillation, the design of electron guns for small-diameter high-current beams, and the thermal capability of small helix structures. The discussion also covers the effects of various design parameters and choice of engineering materials on the ultimate practical limit of power and gain at the operating frequencies. Measurements are presented for advanced experimental tubes.

Effect of Ozone Addition on Combustion Efficiency of Hydrogen: Liquid-Oxygen Propellant in Small Rockets

NASA Technical Reports Server (NTRS)

Miller, Riley O.; Brown, Dwight D.

1959-01-01

An experimental study shows that 2 percent by weight ozone in oxygen has little effect on overall reactivity for a range of oxidant-fuel weight ratios from 1 to 6. This conclusion is based on characteristic-velocity measurements in 200-pound-thrust chambers at a pressure of 300 pounds per square inch absolute with low-efficiency injectors. The presence of 9 percent ozone in oxygen also did not affect performance in an efficient chamber. Explosions were encountered when equipment or procedure permitted ozone to concentrate locally. These experiments indicate that even small amounts of ozone in oxygen can cause operational problems.

Further Studies of the Response of Single Rotor Helicopters to Vortex Encounters

DOT National Transportation Integrated Search

1985-09-01

This report is a continuation of the studies described in Reference where a simplified approach to the problem of predicting the uncontrolled response of a single rotor helicopter to an encounter with the wing tip vortex of a large transport aircraft...

Energy Problems and Environmental Concern

ERIC Educational Resources Information Center

Train, Russell E.

1973-01-01

Discusses problems encountered in energy extraction and consumption, involving nuclear power plant construction, environmental consequences of energy systems, and energy conservation ethics. Indicates that the increasing concern over environmental quality is not the true cause of present energy problems. (CC)

Burner balancing Salem Harbor Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sload, A.W.; Dube, R.J.

The traditional method of burner balancing is first to determine the fuel distribution, then to measure the economizer outlet excess oxygen distribution and to adjust the burners accordingly. Fuel distribution is typically measured by clean and dirty air probing. Coal pipe flow can then be adjusted, if necessary, through the use of coal pipe orificing or by other means. Primary air flow must be adjusted to meet the design criteria of the burner. Once coal pipe flow is balanced to within the desired criteria, secondary air flow to individual burners can be changed by adjusting windbox dampers, burner registers, shroudsmore » or other devices in the secondary air stream. This paper discusses problems encountered in measuring excess O{sub 2} at the economizer outlet. It is important to recognize that O{sub 2} measurements at the economizer outlet, by themselves, can be very misleading. If measurement problems are suspected or encountered, an alternate approach similar to that described should be considered. The alternate method is not only useful for burner balancing but also can be used to help in calibrating the plant excess O{sub 2} instruments and provide an on line means of cross-checking excess air measurements. Balanced burners operate closer to their design stoichiometry, providing better NO{sub x} reduction. For Salem Harbor Station, this means a significant saving in urea consumption.« less

Ambulatory EHR functionality: a comparison of functionality lists.

PubMed

Drury, Barbara M

2006-01-01

There is a proliferation of lists intended to define and clarify the functionality of an ambulatory electronic health record system. These lists come from both private and public entities and vary in terminology, granularity, usability, and comprehensiveness. For example, functionality regarding a problem list includes the following possible definitions: * "Create and maintain patient-specific problem lists," from the HL7 Electronic Health Record Draft Standard for Trial Use. * "Provide a flexible mechanism for retrieval of encounter information that can be organized by diagnosis, problem, problem type," from the Bureau of Primary Health Care. * "The system shall associate encounters, orders, medications and notes with one or more problems," from the Certification Commission on Health Information Technology. * "Displays dates of problems on problem list," from COPIC Insurance Co. * "Shall automatically close acute problems using an automated algorithm," from the Physicians Foundations HIT Subcommittee. This article will compare the attributes of these five electronic health record functionality lists and their usefulness to different audiences-clinicians, application developers and payers.

Orthopaedic Problems of the Mentally Retarded

ERIC Educational Resources Information Center

McSweeney, Anthony

1972-01-01

Problems encountered by orthopedic surgeons treating the mentally retarded are identified, and cooperation among pediatricians, psychiatrists, psychologists, social workers, physiotherapists, occupational therapists, and orthopedic surgeons is recommended. (GW)

NASA's Biomedical Research Program

NASA Technical Reports Server (NTRS)

Ahn, Chung-Hae

1981-01-01

The biomedical research program has been established to investigate the major physiological and psychological problems encountered by man when he undertakes spaceflight. The program seeks to obtain a better definition of each problem, an understanding of its underlying mechanism, and ultimately a means of prevention. In pursuing these goals the program also includes a major effort to develop the research tools and procedures it needs where these are not being developed elsewhere. After almost twenty years of manned spaceflight activities and after a much longer period of space related ground-based research, the program now recognizes two characteristics of spaceflight which are truly unique to space. These are weightlessness and one specific form of radiation. In its present stage of maturity much of the research focuses on mechanisms underlying the basic responses of man and animals to weightlessness. The program consists of nine elements. Eight of these are referable to specific physiological problems that have either been encountered in previous manned spaceflight or which are anticipated to occur as spaceflights last longer, traverse steeper orbital inclinations, or are otherwise different from previous missions. The ninth addresses problems that have neither arisen nor can be reasonably predicted but are suspected on the basis of theoretical models, ground-based animal research, or for other reasons. The program's current emphasis is directed toward the motion sickness problem because of its relevance to Space Shuttle operations. Increased awareness and understanding of the radiation hazard has resulted in more emphasis being placed on the biological effects of high energy, high mass number particulate radiation and upon radiation protection . Cardiovascular and musculoskeleta1 studies are pursued in recognition of the considerable fundamental knowledge that must be acquired in these areas before effective countermeasures to the effects of repetitive or long-term flight can be devised. Major new avenues of research will deal with the psychological accompaniments of spaceflight and with mathematical modelling of physiological systems.

Uncorrelated Encounter Model of the National Airspace System, Version 2.0

DTIC Science & Technology

2013-08-19

can exist to certify avoidance systems for operational use. Evaluations typically include flight tests, operational impact studies, and simulation of...appropriate for large-scale air traffic impact studies— for example, examination of sector loading or conflict rates. The focus here includes two types of...between two IFR aircraft in oceanic airspace. The reason for this is that one cannot observe encounters of sufficient fidelity in the available data

Methodological Problems Encountered in the Review of Research in Science Teaching

ERIC Educational Resources Information Center

Lawlor, E. P.; Lawlor, F. X.

1972-01-01

Describes the difficulties encountered in selecting material to be included in the reviews of science education research in the Curtis Series'' published by the Columbia Teachers' College Press. Presents evidence outlining the weaknesses of using a jury'' to determine so-called superior research. (AL)

Developing Multiplicative Thinking from Additive Reasoning

ERIC Educational Resources Information Center

Tobias, Jennifer M.; Andreasen, Janet B.

2013-01-01

As students progress through elementary school, they encounter mathematics concepts that shift from additive to multiplicative situations (NCTM 2000). When they encounter fraction problems that require multiplicative thinking, they tend to incorrectly extend additive properties from whole numbers (Post et al. 1985). As a result, topics such as …

Dynamic simulation solves process control problem in Oman

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-11-16

A dynamic simulation study solved the process control problems for a Saih Rawl, Oman, gas compressor station operated by Petroleum Development of Oman (PDO). PDO encountered persistent compressor failure that caused frequent facility shutdowns, oil production deferment, and gas flaring. It commissioned MSE (Consultants) Ltd., U.K., to find a solution for the problem. Saih Rawl, about 40 km from Qarn Alam, produces oil and associated gas from a large number of low and high-pressure wells. Oil and gas are separated in three separators. The oil is pumped to Qarn Alam for treatment and export. Associated gas is compressed in twomore » parallel trains. Train K-1115 is a 350,000 standard cu m/day, four-stage reciprocating compressor driven by a fixed-speed electric motor. Train K-1120 is a 1 million standard cu m/day, four-stage reciprocating compressor driven by a fixed-speed electric motor. Train K-1120 is a 1 million standard cu m/day, four-stage centrifugal compressor driven by a variable-speed motor. The paper describes tripping and surging problems with the gas compressor and the control simplifications that solved the problem.« less

Clue Insensitivity in Remote Associates Test Problem Solving

ERIC Educational Resources Information Center

Smith, Steven M.; Sifonis, Cynthia M.; Angello, Genna

2012-01-01

Does spreading activation from incidentally encountered hints cause incubation effects? We used Remote Associates Test (RAT) problems to examine effects of incidental clues on impasse resolution. When solution words were seen incidentally 3-sec before initially unsolved problems were retested, more problems were resolved (Experiment 1). When…

CPR Drilling.

ERIC Educational Resources Information Center

Kittleson, Mark

1980-01-01

Problems encountered by cardiopulmonary resuscitation (CPR) instructors are discussed and some possible solutions to these problems are suggested. Management techniques for effective use of class size, time, and instructional materials are described. (JN)

Development and verification testing of automation and robotics for assembly of space structures

NASA Technical Reports Server (NTRS)

Rhodes, Marvin D.; Will, Ralph W.; Quach, Cuong C.

1993-01-01

A program was initiated within the past several years to develop operational procedures for automated assembly of truss structures suitable for large-aperture antennas. The assembly operations require the use of a robotic manipulator and are based on the principle of supervised autonomy to minimize crew resources. A hardware testbed was established to support development and evaluation testing. A brute-force automation approach was used to develop the baseline assembly hardware and software techniques. As the system matured and an operation was proven, upgrades were incorprated and assessed against the baseline test results. This paper summarizes the developmental phases of the program, the results of several assembly tests, the current status, and a series of proposed developments for additional hardware and software control capability. No problems that would preclude automated in-space assembly of truss structures have been encountered. The current system was developed at a breadboard level and continued development at an enhanced level is warranted.

Aircraft Vortex Wake Descent and Decay under Real Atmospheric Effects

DOT National Transportation Integrated Search

1973-10-01

Aircraft vortex wake descent and decay in a real atmosphere is studied analytically. Factors relating to encounter hazard, wake generation, wake descent and stability, and atmospheric dynamics are considered. Operational equations for encounter hazar...

Robotically performed total mesorectal excision for rectal cancer.

PubMed

Alecu, L; Stănciulea, O; Poesina, D; Tomulescu, V; Vasilescu, C; Popescu, I

2015-01-01

Rectal cancer is an important health problem, due to the increasing number of new cases and the quality of life issues brought forth by surgical treatment in these patients. The aim of the study was to analyse the results of robotic surgery in the treatment of lower and middle rectal cancer,locations in which TME is performed. Patients diagnosed with and operated on for rectal cancer by the means of robotic surgery between 2008-2012 at the Fundeni Clinical Institute were retrospectively analysed. A number of 117 patients with rectal cancer were operated on by robotic surgery, of which 79 (67.52%) were submitted to total mesorectal excision (TME). The most frequently performed surgery was low anterior resection, followed by rectal amputation through abdominoperineal approach.Anastomosis fistula was observed in 9 (11.39%) patients. Local recurrence was encountered in 2 (2.53%) of the robotically performed surgeries. 1. Robotically assisted total mesorectal excision is feasible, safe and can be performed with a small number of complications and a low local recurrence rate; 2. The main advantages are oncological safety and quality of life; 3.Conversion to open surgery is rarely encountered; 4. Protection loop ileostomy existence allows avoiding reintervention in case anastomotic fistula occurs in patients with low anterior resection. 5. Robotic surgery may become gold standard in the surgical treatment of rectal cancer. Celsius.

A 10-Year Cross-Sectional Analysis of Air Force Flight and Operational Medicine Clinic Health Care Services.

PubMed

Tvaryanas, Anthony P; Maupin, Genny M; Fouts, Brittany L

2016-05-01

This study described the patient population and the health care services delivered in the Air Force Flight and Operational Medicine Clinics (FOMCs) over the past 10 years. A cross-sectional analysis was performed on the retrospective cohort of patients who received care at a FOMC from 2003 to 2012. A total of 714,157 individuals, generating 4,829,626 encounters, were included in the cohort. They were predominately male service members under the age of 41. One-fifth of individuals were retirees and family members, with one-third being in the pediatric age range. The cohort accessed health care services for three primary reasons: health examinations (28%), occupational dispositions (18%), and primary care (54%). When primary care was sought, the predominate health conditions were upper respiratory infections, back problems, and nontraumatic joint disorders. When services and procedures were a component of the care, they were predominately associated with health examinations involving ophthalmologic, auditory, and cardiac screening tests. Individuals accessing the FOMCs had relatively low need for access to health care services, requiring a median of two annual encounters. This study provided insight into the health care delivered in FOMCs and establishes a foundation for future planning and management of FOMC health care delivery. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

Interactive visualization tools for the structural biologist.

PubMed

Porebski, Benjamin T; Ho, Bosco K; Buckle, Ashley M

2013-10-01

In structural biology, management of a large number of Protein Data Bank (PDB) files and raw X-ray diffraction images often presents a major organizational problem. Existing software packages that manipulate these file types were not designed for these kinds of file-management tasks. This is typically encountered when browsing through a folder of hundreds of X-ray images, with the aim of rapidly inspecting the diffraction quality of a data set. To solve this problem, a useful functionality of the Macintosh operating system (OSX) has been exploited that allows custom visualization plugins to be attached to certain file types. Software plugins have been developed for diffraction images and PDB files, which in many scenarios can save considerable time and effort. The direct visualization of diffraction images and PDB structures in the file browser can be used to identify key files of interest simply by scrolling through a list of files.

[Software for illustrating a cost-quality balance carried out by clinical laboratory practice].

PubMed

Nishibori, Masahiro; Asayama, Hitoshi; Kimura, Satoshi; Takagi, Yasushi; Hagihara, Michio; Fujiwara, Mutsunori; Yoneyama, Akiko; Watanabe, Takashi

2010-09-01

We have no proper reference indicating the quality of clinical laboratory practice, which should clearly illustrates that better medical tests require more expenses. Japanese Society of Laboratory Medicine was concerned about recent difficult medical economy and issued a committee report proposing a guideline to evaluate the good laboratory practice. According to the guideline, we developed software that illustrate a cost-quality balance carried out by clinical laboratory practice. We encountered a number of controversial problems, for example, how to measure and weight each quality-related factor, how to calculate costs of a laboratory test and how to consider characteristics of a clinical laboratory. Consequently we finished only prototype software within the given period and the budget. In this paper, software implementation of the guideline and the above-mentioned problems are summarized. Aiming to stimulate these discussions, the operative software will be put on the Society's homepage for trial

Time Trends in the Family Physician Management of Insomnia: The Australian Experience (2000-2015).

PubMed

Miller, Christopher B; Valenti, Lisa; Harrison, Christopher M; Bartlett, Delwyn J; Glozier, Nick; Cross, Nathan E; Grunstein, Ronald R; Britt, Helena C; Marshall, Nathaniel S

2017-06-15

To evaluate changes in rates of family physician (FP) management of insomnia in Australia from 2000-2015. The Bettering the Evaluation And Care of Health (BEACH) program is a nationally representative cross-sectional survey of 1,000 newly randomly sampled family physicians' activity in Australia per year, who each record details of 100 consecutive patient encounters. This provided records of approximately 100,000 encounters each year. We identified all encounters with patients older than 15 years where insomnia or difficulty sleeping was managed and assessed trends in these encounters from 2000-2015. There was no change in the management rate of insomnia from 2000-2007 (1.54 per 100 encounters [95% confidence interval [CI]: 1.49-1.58]). This rate was lower from 2008-2015 (1.31 per 100 encounters [95% CI: 1.27-1.35]). There was no change in FP management: pharmacotherapy was used in approximately 90% of encounters; nonpharmacological advice was given at approximately 20%; and onward referral at approximately 1% of encounters. Prescription of temazepam changed from 54.6 [95% CI: 51.4-57.9] per 100 insomnia problems in 2000-2001 to 43.6 [95% CI: 40.1-47.0] in 2014-2015, whereas zolpidem increased steadily from introduction in 2000 to 14.6 [95% CI: 12.2-17.1] per 100 insomnia problems in 2006-2007, and then decreased to 7.3 [95% CI: 5.4-9.2] by 2014-2015. Insomnia management frequency decreased after 2007 in conjunction with ecologically associated Australian media reporting of adverse effects linked to zolpidem use. Australian FPs remain reliant on pharmacotherapy for the management of insomnia. © 2017 American Academy of Sleep Medicine

Challenges Encountered by 17 Autistic Young Adults in Hong Kong

ERIC Educational Resources Information Center

Wong, Shui-wai

2017-01-01

The self-portrayals of 17 young persons with autism spectrum disorder reveal the challenges encountered by them, including study problems, inter-personal relationships, being bullied by classmates at school, discrimination by the public in general and teachers, social workers, and peers in particular, obstacles to post-secondary education,…

Value of Family and Group Counseling Models where Grandparents Function as Parents to Their Grandchildren

ERIC Educational Resources Information Center

Edwards, Oliver W.; Ray, Shannon L.

2010-01-01

Those involved in circumstances in which children are raised by their grandparents often encounter serious problems that require assistance from counselors. Research suggests that grandparents and parents in these families typically experience heightened stress and psychosocial distress. Additionally, the children often encounter behavioral,…

Israeli Adolescents and Military Service: Encounters.

ERIC Educational Resources Information Center

Levy, Amihay; And Others

1987-01-01

Asserts that inadequate attention has been paid to the problems of the young soldier entering army life in Israel. Delineates some areas of friction and vulnerability between the worlds of the youth and the military. Describes the systematization of these encounters into groups, creating the "Binary Model," which helps in locating and…

Control of autoclave scaling during acid pressure leaching of nickeliferous laterite ore

NASA Astrophysics Data System (ADS)

Queneau, P. B.; Doane, R. E.; Cooperrider, M. W.; Berggren, M. H.; Rey, P.

1984-09-01

An operating problem encountered at the Moa Bay operation in Cuba, where nickeliferous laterite ore is processed by sulfuric acid pressure leaching, is the formation of alunite and hematite deposits on the autoclave walls. The AMAX Extractive Research & Development, Inc., metallurgical laboratory (Golden, Colorado) has made substantial improvements in the Moa Bay process in the area of metal recovery, energy consumption, and feed versatility. One of the advantages of AMAX's process is its ability to treat substantial portions of nickel-and magnesium-rich serpentine while maintaining acid utilization efficiency. Scale formation is minimized by combining staged acid addition with vigorous agitation and 270 °C operation. This paper describes how advantage can be taken of MgSO4· XH2O precipitation both to inhibit alunite scaling and to disperse hematite scale within the MgSO4 · XH2O matrix. Cooling the autoclave from its 270 ·C operating temperature down to 180 ·C takes advantage of the reverse solubility of magnesium sulfate. The magnesium dissolves, liberating entrained hematite, thus providing a means for control of autoclave scale with minimum process disruption.

Wide range operation of advanced low NOx combustors for supersonic high-altitude aircraft gas turbines

NASA Technical Reports Server (NTRS)

Roberts, P. B.; Fiorito, R. J.

1977-01-01

An initial rig program tested the Jet Induced Circulation (JIC) and Vortex Air Blast (VAB) systems in small can combustor configurations for NOx emissions at a simulated high altitude, supersonic cruise condition. The VAB combustor demonstrated the capability of meeting the NOx goal of 1.0 g NO2/kg fuel at the cruise condition. In addition, the program served to demonstrate the limited low-emissions range available from the lean, premixed combustor. A follow-on effort was concerned with the problem of operating these lean, premixed combustors with acceptable emissions at simulated engine idle conditions. Various techniques have been demonstrated that allow satisfactory operation on both the JIC and VAB combustors at idle with CO emissions below 20 g/kg fuel. The VAB combustor was limited by flashback/autoignition phenomena at the cruise conditions to a pressure of 8 atmospheres. The JIC combustor was operated up to the full design cruise pressure of 14 atmospheres without encountering an autoignition limitation although the NOx levels, in the 2-3 g NO2/kg fuel range, exceeded the program goal.

"What constitutes a 'problem'?" Producing 'alcohol problems' through online counselling encounters.

PubMed

Savic, Michael; Ferguson, Nyssa; Manning, Victoria; Bathish, Ramez; Lubman, Dan I

2017-08-01

Typically, health policy, practice and research views alcohol and other drug (AOD) 'problems' as objective things waiting to be detected, diagnosed and treated. However, this approach to policy development and treatment downplays the role of clinical practices, tools, discourses, and systems in shaping how AOD use is constituted as a 'problem'. For instance, people might present to AOD treatment with multiple psycho-social concerns, but usually only a singular AOD-associated 'problem' is considered serviceable. As the assumed nature of 'the serviceable problem' influences what treatment responses people receive, and how they may come to be enacted as 'addicted' or 'normal' subjects, it is important to subject clinical practices of problem formulation to critical analysis. Given that the reach of AOD treatment has expanded via the online medium, in this article we examine how 'problems' are produced in online alcohol counselling encounters involving people aged 55 and over. Drawing on poststructural approaches to problematisation, we not only trace how and what 'problems' are produced, but also what effects these give rise to. We discuss three approaches to problem formulation: (1) Addiction discourses at work; (2) Moving between concerns and alcohol 'problems'; (3) Making 'problems' complex and multiple. On the basis of this analysis, we argue that online AOD counselling does not just respond to pre-existing 'AOD problems'. Rather, through the social and clinical practices of formulation at work in clinical encounters, online counselling also produces them. Thus, given a different set of circumstances, practices and relations, 'problems' might be defined or emerge differently-perhaps not as 'problems' at all or perhaps as different kinds of concerns. We conclude by highlighting the need for a critical reflexivity in AOD treatment and policy in order to open up possibilities for different ways of engaging with, and responding to, people's needs in their complexity. Copyright © 2017 Elsevier B.V. All rights reserved.

Lunar Dust on Heat Rejection System Surfaces: Problems and Prospects

NASA Technical Reports Server (NTRS)

Gaier, James R.; Jaworske, Donald A.

2007-01-01

Heat rejection from power systems will be necessary for human and robotic activity on the lunar surface. Functional operation of such heat rejection systems is at risk of degradation as a consequence of dust accumulation. The Apollo astronauts encountered marked degradation of performance in heat rejection systems for the lunar roving vehicle, science packages, and other components. Although ground testing of dust mitigation concepts in support of the Apollo mission identified mitigation tools, the brush concept adopted by the Apollo astronauts proved essentially ineffective. A better understanding of the issues associated with the impact of lunar dust on the functional performance of heat rejection systems and its removal is needed as planning gets underway for human and robotic missions to the Moon. Renewed emphasis must also be placed on ground testing of pristine and dust-covered heat rejection system surfaces to quantify degradation and address mitigation concepts. This paper presents a review of the degradation in performance of heat rejection systems encountered on the lunar surface to-date, and will discuss current activities underway to evaluate the durability of candidate heat rejection system surfaces and current dust mitigation concepts.

Strategy Keys as Tools for Problem Solving

ERIC Educational Resources Information Center

Herold-Blasius, Raja

2017-01-01

Problem solving is one of the main competences we seek to teach students at school for use in their future lives. However, when dealing with mathematical problems, teachers encounter a wide variety of difficulties. To foster students' problem-solving skills, the authors developed "strategy keys." Strategy keys can serve as material to…

Democracy in NGOs: Making the Cooperative Option Work.

ERIC Educational Resources Information Center

Wardle, Chris

1988-01-01

Discusses several problems encountered by nongovernmental organizations (NGOs) that structure themselves as cooperatives, with all members being equal. Presents four problem areas--(1) decision making, (2) meetings, (3) job rotation, and (4) growth--as well as strategies to solve potential problems. (CH)

The Effect of New Vocabulary on Problem Solving in Novice Physics Students.

ERIC Educational Resources Information Center

Sobolewski, Stanley J.

One of the difficulties encountered by novice problem solvers in introductory physics is in the area of problem solving. It has been shown in other studies that poor problem solvers are affected by the surface aspects of the problem in contrast with more efficient problem solvers who are capable of constructing a mental model of the physical…

Scala vestibuli cochlear implantation in patients with partially ossified cochleas.

PubMed

Berrettini, Stefano; Forli, Francesca; Neri, Emanuele; Segnini, Giovanni; Franceschini, Stefano Sellari

2002-11-01

Partial cochlear obstruction is a relatively common finding in candidates for cochlear implants and frequently involves the inferior segment of the scala tympani in the basal turn of the cochlea. In such patients, the scala vestibuli is often patent and offers an alternative site for implantation. The current report describes two patients with such partial obstruction of the inferior segment of the basal cochlear turn, caused in one case by systemic vasculitis (Takayasu's disease) and in the other by obliterative otosclerosis. A scala vestibuli implantation allowed for complete insertion of the electrode array. No problems were encountered during the surgical procedures and the good post-operative hearing and communicative outcomes achieved were similar to those reported in patients without cochlear ossification. The importance of accurate pre-operative radiological study of the inner ear is underscored, to disclose the presence and define the features of the cochlear ossification and ultimately to properly plan the surgical approach.

Geothermal space heating for the Senior Citizens Center at Truth or Consequences, New Mexico. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mancini, T.R.; Chaturvedi, L.N.; Gebhard, T.G.

A demonstration project to heat the Senior Citizens Center at Truth or Consequences, New Mexico with geothermal waters is described. There were three phases to the project: Phase I - design and permitting; Phase II - installation of the heating system and well drilling; and Phase III - operation of the system. All three phases went well and there was only one major problem encountered. This was that the well which was drilled to serve as the geothermal source was dry. This could not have been anticipated and there was, as a contingency plan, the option of using an existingmore » sump in the Teen Center adjacent to the Senior Citizens Center as the geothermal source. The system was made operational in August of 1981 and has virtually supplied all of the heat to the Senior Citizens Center during this winter.« less

Clinical experience with fibrin glue in cardiac surgery.

PubMed

Köveker, G; de Vivie, E R; Hellberg, K D

1981-10-01

Cardiac surgery is often associated with hemostatic abnormalities leading to severe bleeding. Special problems are to be expected, if prosthetic material has to be implanted. Preclotting of Dacron prostheses with blood is well established but failures are sometimes encountered. Several years ago a new hemostatic sealing system (fibrin glue) was introduced into therapy. Since 1978 fibrin glue has been applied in 176 patients. The indications were: 1. sealing of woven Dacron prostheses, 2. bleeding from suture-holes (Gore-Tex), 3. diffuse myocardial bleeding and 4. prevention of kinking of coronary artery grafts. In 32 patients with an aortoventriculoplasty operation using Dacron the "blood preclotting" and "fibrin sealing" methods were compared. In the fibrin glue group there was a significant reduction in postoperative blood loss as well as a shortening of the operation time (period of protamin administration to skin closure). No fibrinolytic dissolution of the fibrin layer on the prostheses was observed.

Solar Power for Near Sun, High-Temperature Missions

NASA Technical Reports Server (NTRS)

Landis, Geoffrey A.

2008-01-01

Existing solar cells lose performance at the high temperatures encountered in Mercury orbit and inward toward the sun. For future missions designed to probe environments close to the sun, it is desirable to develop array technologies for high temperature and high light intensity. Approaches to solar array design for near-sun missions include modifying the terms governing temperature of the cell and the efficiency at elevated temperature, or use of techniques to reduce the incident solar energy to limit operating temperature. An additional problem is found in missions that involve a range of intensities, such as the Solar Probe + mission, which ranges from a starting distance of 1 AU from the sun to a minimum distance of 9.5 solar radii, or 0.044 AU. During the mission, the solar intensity ranges from one to about 500 times AM0. This requires a power system to operate over nearly three orders of magnitude of incident intensity.

Self-calibration techniques of underwater gamma ray spectrometers.

PubMed

Vlachos, D S

2005-01-01

In situ continuous monitoring of radioactivity in the water environment has many advantages compared to sampling and analysis techniques but a few shortcomings as well. Apart from the problems encountered in the assembly of the carrying autonomous systems, continuous operation some times alters the response function of the detectors. For example, the continuous operation of a photomultiplier tube results in a shift in the measured spectrum towards lower energies, making thus necessary the re-calibration of the detector. In this work, it is proved, that when measuring radioactivity in seawater, a photo peak around 50 keV will be always present in the measured spectrum. This peak is stable, depends only on the scattering rates of photons in seawater and, when it is detectable, can be used in conjunction with other peaks (40K and/or 208Tl) as a reference peak for the continuous calibration of the detector.

Mature data transport and command management services for the Space Station

NASA Technical Reports Server (NTRS)

Carper, R. D.

1986-01-01

The duplex space/ground/space data services for the Space Station are described. The need to separate the uplink data service functions from the command functions is discussed. Command management is a process shared by an operation control center and a command management system and consists of four functions: (1) uplink data communications, (2) management of the on-board computer, (3) flight resource allocation and management, and (4) real command management. The new data service capabilities provided by microprocessors, ground and flight nodes, and closed loop and open loop capabilities are studied. The need for and functions of a flight resource allocation management service are examined. The system is designed so only users can access the system; the problems encountered with open loop uplink access are analyzed. The procedures for delivery of operational, verification, computer, and surveillance and monitoring data directly to users are reviewed.

Thermodynamic performance testing of the orbiter flash evaporator system

NASA Technical Reports Server (NTRS)

Jaax, J. R.; Melgares, M. A.; Frahm, J. P.

1980-01-01

System level testing of the space shuttle orbiter's development flash evaporator system (FES) was performed in a thermal vacuum chamber capable of simulating ambient ascent, orbital, and entry temperature and pressure profiles. The test article included the evaporator assembly, high load and topping exhaust duct and nozzle assemblies, and feedwater supply assembly. Steady state and transient heat load, water pressure/temperature and ambient pressure/temperature profiles were imposed by especially designed supporting test hardware. Testing in 1978 verified evaporator and duct heater thermal design, determined FES performance boundaries, and assessed topping evaporator plume characteristics. Testing in 1979 combined the FES with the other systems in the orbiter active thermal control subsystem (ATCS). The FES met or exceeded all nominal and contingency performance requirements during operation with the integrated ATCS. During both tests stability problems were encountered during steady state operations which resulted in subsequent design changes to the water spray nozzle and valve plate assemblies.

Problems Implementing Problem-Based Learning by a Private Malaysian University

ERIC Educational Resources Information Center

Tik, Chan Chang

2014-01-01

In this case study the focus is on lecturers' readiness in the design of PBL problems and to facilitate students' learning. This paper also looks into students' readiness in terms of acquiring metacognitive skills and collaborating in group to solve PBL problems. Problems encountered by both lecturers and students are discussed in the context of…

Determining the Performances of Pre-Service Primary School Teachers in Problem Posing Situations

ERIC Educational Resources Information Center

Kilic, Cigdem

2013-01-01

This study examined the problem posing strategies of pre-service primary school teachers in different problem posing situations (PPSs) and analysed the issues they encounter while posing problems. A problem posing task consisting of six PPSs (two free, two structured, and two semi-structured situations) was delivered to 40 participants.…

New Mission Old Spacecraft: EPOXI's Approach to the Comet Hartley-2

NASA Technical Reports Server (NTRS)

Rieber, Richard R.; LaBorde, Gregory R.

2012-01-01

NASA's Deep Impact mission ended successfully in 2005 after an impact and close flyby of the comet 9P/Tempel-1. The Flyby spacecraft was placed in hibernation and was left to orbit the sun. In 2007, engineers at the Jet Propulsion Laboratory brought the spacecraft out of hibernation and successfully performed two additional missions. These missions were EPOCh, Extra-solar Planetary Observation and Characterization, a photometric investigation of transiting exo-planets, and DIXI, Deep Impact eXtended Investigation, which maneuvered the Flyby spacecraft towards a close encounter with the comet 103P/Hartley- 2 on 4 November 2010. The names of these two scientific investigations combine to form the overarching mission's name, EPOXI. The encounter with 103P/Hartley-2 was vastly different from the prime mission's encounter with 9P/Tempel-1. The geometry of encounter was nearly 180 ? different and 103P/Hartley-2 was approximately one-quarter the size of 9P/Tempel-1. Mission operations for the comet flyby were broken into three phases: a) Approach, b) Encounter, and c) Departure. This paper will focus on the approach phase of the comet encounter. It will discuss the strategies used to decrease both cost and risk while maximizing science return and some of the challenges experienced during operations.

Cold Test Operation of the German VEK Vitrification Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fleisch, J.; Schwaab, E.; Weishaupt, M.

2008-07-01

In 2007 the German High-Level Liquid Waste (HLLW) Vitrification plant VEK (Verglasungseinrichtung Karlsruhe) has passed a three months integral cold test operation as final step before entering the hot phase. The overall performance of the vitrification process equipment with a liquid-fed ceramic glass melter as main component proved to be completely in line with the requirements of the regulatory body. The retention efficiency of main radioactive-bearing elements across melter and wet off-gas treatment system exceeded the design values distinctly. The strategy to produce a specified waste glass could be successfully demonstrated. The results of the cold test operation allow enteringmore » the next step of hot commissioning, i.e. processing of approximately 2 m{sup 3} of diluted HLLW. In summary: An important step of the VEK vitrification plant towards hot operation has been the performance of the cold test operation from April to July 2007. This first integral operation was carried out under boundary conditions and rules established for radioactive operation. Operation and process control were carried out following the procedure as documented in the licensed operational manuals. The function of the process technology and the safe operation could be demonstrated. No severe problems were encountered. Based on the positive results of the cold test, application of the license for hot operation has been initiated and is expected in the near future. (authors)« less

Deep Impact comet encounter: design, development, and operations of the Big Event at Tempel 1

NASA Technical Reports Server (NTRS)

Wissler, Steven

2005-01-01

Deep Impact is NASA's eighth Discovery mission. This low-cost, focused planetary science investigation gathered the data necessary to help scientists unlock early secrets of our solar system. The comet encounter with Tempel 1 was a complex event - requiring extremely accurate timing, robutstness to an unknown environment, and flight team adaptability. The mission operations and flight systems performance were spectacular for approach, impact, and lookback imaging on July 4, 2005.

Deep Impact comet encounter: design, development, and operations of the big event at Tempel 1

NASA Technical Reports Server (NTRS)

Wissler, Steven; Rocca, Jennifer; Kubitschek, Daniel

2005-01-01

Deep Impact is NASA's eighth Discovery mission. This low-cost, focused planetary science investigation gathered the data necessary to help scientists unlock early secrets of our solar system. The comet encounter with Tempel 1 was a complex event - requiring extremely accurate timing, robustness to an unknown environment, and flight team adaptibility. The mission operations and flight systems performance were spectacular for approach, impact, and lookback imaging on July 4, 2005.

Helping Students Navigate Faith Challenges in the Biblical Studies Classroom

ERIC Educational Resources Information Center

Sharp, Carolyn J.; Clark-Soles, Jaime

2012-01-01

What happens when students encounter the academic study of the Bible in the seminary or undergraduate classroom? Does a teacher have a responsibility to help students navigate challenges to Christian faith that might arise? What pedagogical problems and opportunities does this encounter present? How does this issue manifest differently in…

Doctor-patient communication on the telephone.

PubMed

Curtis, P; Evens, S

1989-01-01

Since its invention, the telephone has been an important tool in medical practice, particularly for primary care physicians. Approximately half the calls made to a physician's office during regular consulting hours are for clinical problems and most are handled effectively over the phone without an immediate office visit. Telephone encounters are generally very brief, and managing such calls requires a pragmatic approach that is often quite different from the approach taken in the office visit. The telephone encounter should be recognized and recorded as a specific medical interaction in the medical chart for both clinical and legal reasons. Effective telephone encounters depend on good communication skills; decision making regarding disposition is a major goal. The physician's perception of a medical problem may be different from the patient's; patients are frequently seeking advice and reassurance rather than diagnosis and treatment, and may call because of anxiety and psychological stress. For physicians and their families who are not prepared for after-hours telephone encounters, calls that interrupt more "legitimate" activities may result in anger or frustration for the physician and dissatisfaction for the patient.

Active vibrations control of journal bearings with the use of piezoactuators

NASA Astrophysics Data System (ADS)

Tůma, Jiří; Šimek, Jiří; Škuta, Jaromír; Los, Jaroslav

2013-04-01

Rotor instability is one of the most serious problems of high-speed rotors supported by sliding bearings. With constantly increasing parameters, new machines problems with rotor instability are encountered more and more often. Even though there are many solutions based on passive improvement of the bearing geometry to enlarge the operational speed range of the journal bearing, the paper deals with a working prototype of a system for the active vibration control of journal bearings with the use of piezoactuators. The controllable journal bearing is a part of a test rig, which consists of a rotor driven by an inductive motor up to 23,000 rpm. The actively controlled journal bearing consists of a movable bushing, which is actuated by two piezoactuators. The journal vibration is measured by a pair of proximity probes. The control system enables run-up, coast-down and steady-state rotation. A real-time simulator dSpace encloses the control loop. Force produced by piezoactuators and acting at the bushing is controlled according to error signals derived from the proximity probe output signals. As it was proved by experiments the active vibration control extends considerably the range of the operational speed.

Cloud decision model for selecting sustainable energy crop based on linguistic intuitionistic information

NASA Astrophysics Data System (ADS)

Peng, Hong-Gang; Wang, Jian-Qiang

2017-11-01

In recent years, sustainable energy crop has become an important energy development strategy topic in many countries. Selecting the most sustainable energy crop is a significant problem that must be addressed during any biofuel production process. The focus of this study is the development of an innovative multi-criteria decision-making (MCDM) method to handle sustainable energy crop selection problems. Given that various uncertain data are encountered in the evaluation of sustainable energy crops, linguistic intuitionistic fuzzy numbers (LIFNs) are introduced to present the information necessary to the evaluation process. Processing qualitative concepts requires the effective support of reliable tools; then, a cloud model can be used to deal with linguistic intuitionistic information. First, LIFNs are converted and a novel concept of linguistic intuitionistic cloud (LIC) is proposed. The operations, score function and similarity measurement of the LICs are defined. Subsequently, the linguistic intuitionistic cloud density-prioritised weighted Heronian mean operator is developed, which served as the basis for the construction of an applicable MCDM model for sustainable energy crop selection. Finally, an illustrative example is provided to demonstrate the proposed method, and its feasibility and validity are further verified by comparing it with other existing methods.

WEST-3 wind turbine simulator development. Volume 2: Verification

NASA Technical Reports Server (NTRS)

Sridhar, S.

1985-01-01

The details of a study to validate WEST-3, a new time wind turbine simulator developed by Paragib Pacific Inc., are presented in this report. For the validation, the MOD-0 wind turbine was simulated on WEST-3. The simulation results were compared with those obtained from previous MOD-0 simulations, and with test data measured during MOD-0 operations. The study was successful in achieving the major objective of proving that WEST-3 yields results which can be used to support a wind turbine development process. The blade bending moments, peak and cyclic, from the WEST-3 simulation correlated reasonably well with the available MOD-0 data. The simulation was also able to predict the resonance phenomena observed during MOD-0 operations. Also presented in the report is a description and solution of a serious numerical instability problem encountered during the study. The problem was caused by the coupling of the rotor and the power train models. The results of the study indicate that some parts of the existing WEST-3 simulation model may have to be refined for future work; specifically, the aerodynamics and procedure used to couple the rotor model with the tower and the power train models.

Automated control of hierarchical systems using value-driven methods

NASA Technical Reports Server (NTRS)

Pugh, George E.; Burke, Thomas E.

1990-01-01

An introduction is given to the Value-driven methodology, which has been successfully applied to solve a variety of difficult decision, control, and optimization problems. Many real-world decision processes (e.g., those encountered in scheduling, allocation, and command and control) involve a hierarchy of complex planning considerations. For such problems it is virtually impossible to define a fixed set of rules that will operate satisfactorily over the full range of probable contingencies. Decision Science Applications' value-driven methodology offers a systematic way of automating the intuitive, common-sense approach used by human planners. The inherent responsiveness of value-driven systems to user-controlled priorities makes them particularly suitable for semi-automated applications in which the user must remain in command of the systems operation. Three examples of the practical application of the approach in the automation of hierarchical decision processes are discussed: the TAC Brawler air-to-air combat simulation is a four-level computerized hierarchy; the autonomous underwater vehicle mission planning system is a three-level control system; and the Space Station Freedom electrical power control and scheduling system is designed as a two-level hierarchy. The methodology is compared with rule-based systems and with other more widely-known optimization techniques.

Problem-Solving Examples as Interactive Learning Objects for Educational Digital Libraries

ERIC Educational Resources Information Center

Brusilovsky, Peter; Yudelson, Michael; Hsiao, I-Han

2009-01-01

The paper analyzes three major problems encountered by our team as we endeavored to turn problem solving examples in the domain of programming into highly reusable educational activities, which could be included as first class objects in various educational digital libraries. It also suggests three specific approaches to resolving these problems,…

Role of plastic surgeons in hepatic artery anastomosis in living donor liver transplantation: our experience of 10 cases.

PubMed

Mangal, Mahesh; Gambhir, Swaroop; Gupta, Anubhav; Shah, Amiti

2012-07-01

To understand the practical difficulties encountered while performing hepatic artery anastomosis by microsurgical technique in living donor liver transplantation. We undertook a retrospective study of 10 cases of hepatic artery anastomosis done at the level of bifurcation of the right hepatic artery and proximal when the plastic surgery team was called in for assistance. All the anastomoses were performed under an operating microscope (up to 24× magnification). In seven of these cases, anterior wall anastomosis was performed primarily, and in three cases, posterior wall approach was chosen. The main indications of calling in the plastic surgery team were to overcome these technical hurdles: (1) in cases where the caliber of the vessel was less than 2 mm in size; (2) dissection (separation of mucosa and adventitia) of the recipient vessel wall; (3) donor pedicle being so short that possibility of revision of the anastomosis seemed unlikely, necessitating single, sure-shot anastomosis without a chance of revision. The problems encountered by our microsurgical team were: (1) a special set of instruments was warranted because of the depth of the hepatic artery; (2) anastomosis had to be done in standing, stooped position with unsupported hands; (3) excessive movements due to respiration and profuse fluid collection in the field added to the hurdles encountered. All patients were prospectively followed by color Doppler ultrasound protocol for the first 5 days after surgery. Hepatic artery thrombosis was encountered in one case on postoperative day 10, which was successfully treated by thrombolytic therapy, but unfortunately the patient died of multiorgan failure on posttransplant day 30. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

ADOPTING THE PROBLEM BASED LEARNING APPROACH IN A GIS PROJECT MANAGEMENT CLASS

EPA Science Inventory

Problem Based Learning (PBL) is a process that emphasizes the need for developing problem solving skills through hands-on project formulation and management. A class adopting the PBL method provides students with an environment to acquire necessary knowledge to encounter, unders...

Problems in Evaluating Adult Literacy Programmes.

ERIC Educational Resources Information Center

Rajyalakshmi, C.

1980-01-01

The study of the Functional Literacy Program in India encountered problems of opposition to evaluation, inappropriate respondents, and difficulties in contacting participants, which point to changes that should be made in the evaluation methods. (SK)

76 FR 6054 - Use of Less-Than-Lethal Force: Delegation

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-03

... report any medical problems encountered by subjects being subdued and arrested, and no medical problems.... Therefore, for accuracy in terminology, we replace the term ``non-lethal'' with the more accurate term...

Common statistical and research design problems in manuscripts submitted to high-impact psychiatry journals: what editors and reviewers want authors to know.

PubMed

Harris, Alex H S; Reeder, Rachelle; Hyun, Jenny K

2009-10-01

Journal editors and statistical reviewers are often in the difficult position of catching serious problems in submitted manuscripts after the research is conducted and data have been analyzed. We sought to learn from editors and reviewers of major psychiatry journals what common statistical and design problems they most often find in submitted manuscripts and what they wished to communicate to authors regarding these issues. Our primary goal was to facilitate communication between journal editors/reviewers and researchers/authors and thereby improve the scientific and statistical quality of research and submitted manuscripts. Editors and statistical reviewers of 54 high-impact psychiatry journals were surveyed to learn what statistical or design problems they encounter most often in submitted manuscripts. Respondents completed the survey online. The authors analyzed survey text responses using content analysis procedures to identify major themes related to commonly encountered statistical or research design problems. Editors and reviewers (n=15) who handle manuscripts from 39 different high-impact psychiatry journals responded to the survey. The most commonly cited problems regarded failure to map statistical models onto research questions, improper handling of missing data, not controlling for multiple comparisons, not understanding the difference between equivalence and difference trials, and poor controls in quasi-experimental designs. The scientific quality of psychiatry research and submitted reports could be greatly improved if researchers became sensitive to, or sought consultation on frequently encountered methodological and analytic issues.

Strategies for Ground Based Testing of Manned Lunar Surface Systems

NASA Technical Reports Server (NTRS)

Beyer, Jeff; Peacock, Mike; Gill, Tracy

2009-01-01

Integrated testing (such as Multi-Element Integrated Test (MEIT)) is critical to reducing risks and minimizing problems encountered during assembly, activation, and on-orbit operation of large, complex manned spacecraft. Provides the best implementation of "Test Like You Fly:. Planning for integrated testing needs to begin at the earliest stages of Program definition. Program leadership needs to fully understand and buy in to what integrated testing is and why it needs to be performed. As Program evolves and design and schedules mature, continually look for suitable opportunities to perform testing where enough components are together in one place at one time. The benefits to be gained are well worth the costs.

Health profiles of foreigners attending primary care clinics in Malaysia.

PubMed

Ab Rahman, Norazida; Sivasampu, Sheamini; Mohamad Noh, Kamaliah; Khoo, Ee Ming

2016-06-14

The world population has become more globalised with increasing number of people residing in another country for work or other reasons. Little is known about the health profiles of foreign population in Malaysia. The aim of this study was to provide a detailed description of the health problems presented by foreigners attending primary care clinics in Malaysia. Data were derived from the 2012 National Medical Care Survey (NMCS), a cross sectional survey of primary care encounters from public and private primary care clinics sampled from five regions in Malaysia. Patients with foreign nationality were identified and analysed for demographic profiles, reasons for encounter (RFEs), diagnosis, and provision of care. Foreigners accounted for 7.7 % (10,830) of all patient encounters from NMCS. Most encounters were from private clinics (90.2 %). Median age was 28 years (IQR: 24.0, 34.8) and 69.9 % were male. Most visits to the primary care clinics were for symptom-based complaints (69.5 %), followed by procedures (23.0 %) and follow-up visit (7.4 %). The commonest diagnosis in public clinics was antenatal care (21.8 %), followed by high risk pregnancies (7.5 %) and upper respiratory tract infection (URTI) (6.8 %). Private clinics had more cases for general medical examination (13.5 %), URTI (13.1 %) and fever (3.9 %). Medications were prescribed to 76.5 % of these encounters. More foreigners were seeking primary medical care from private clinics and the encounters were for general medical examinations and acute minor ailments. Those who sought care from public clinics were for obstetric problems and chronic diseases. Medications were prescribed to two-thirds of the encounters while other interventions: laboratory investigations, medical procedures and follow-up appointment had lower rates in private clinics. Foreigners are generally of young working group and are expected to have mandatory medical checks. The preponderance of obstetrics seen in public clinics suggests a need for improved access to maternal care and pregnancy related care. This has implication on policy and health care provision and access for foreigners and future studies are needed to look into strategies to solve these problems.

29 CFR 1926.1436 - Derricks.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and guying must be designed to withstand maximum horizontal and vertical forces encountered when... be designed to withstand maximum horizontal and vertical forces encountered when operating within...”). (D) Applicable terms in section 7-0.2 (“Definitions”). (ii) Load tests for new hoists. The employer...

29 CFR 1926.1436 - Derricks.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and guying must be designed to withstand maximum horizontal and vertical forces encountered when... be designed to withstand maximum horizontal and vertical forces encountered when operating within...”). (D) Applicable terms in section 7-0.2 (“Definitions”). (ii) Load tests for new hoists. The employer...

29 CFR 1926.1436 - Derricks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and guying must be designed to withstand maximum horizontal and vertical forces encountered when... be designed to withstand maximum horizontal and vertical forces encountered when operating within...”). (D) Applicable terms in section 7-0.2 (“Definitions”). (ii) Load tests for new hoists. The employer...

29 CFR 1926.1436 - Derricks.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and guying must be designed to withstand maximum horizontal and vertical forces encountered when... be designed to withstand maximum horizontal and vertical forces encountered when operating within...”). (D) Applicable terms in section 7-0.2 (“Definitions”). (ii) Load tests for new hoists. The employer...

Applications of remote sensing to water resources

NASA Technical Reports Server (NTRS)

1977-01-01

Analyses were made of selected long-term (1985 and beyond) objectives, with the intent of determining if significant data-related problems would be encountered and to develop alternative solutions to any potential problems. One long-term objective selected for analysis was Water Availability Forecasting. A brief overview was scheduled in FY-77 of the objective -- primarily a fact-finding study to allow Data Management personnel to gain adequate background information to perform subsequent data system analyses. This report, includes discussions on some of the larger problems currently encountered in water measurement, the potential users of water availability forecasts, projected demands of users, current sensing accuracies, required parameter monitoring, status of forecasting modeling, and some measurement accuracies likely to be achievable by 1980 and 1990.

Learning Impasses in Problem Solving

NASA Technical Reports Server (NTRS)

Hodgson, J. P. E.

1992-01-01

Problem Solving systems customarily use backtracking to deal with obstacles that they encounter in the course of trying to solve a problem. This paper outlines an approach in which the possible obstacles are investigated prior to the search for a solution. This provides a solution strategy that avoids backtracking.

Using CAS to Solve Classical Mathematics Problems

ERIC Educational Resources Information Center

Burke, Maurice J.; Burroughs, Elizabeth A.

2009-01-01

Historically, calculus has displaced many algebraic methods for solving classical problems. This article illustrates an algebraic method for finding the zeros of polynomial functions that is closely related to Newton's method (devised in 1669, published in 1711), which is encountered in calculus. By exploring this problem, precalculus students…

Improving Audio Quality in Distance Learning Applications.

ERIC Educational Resources Information Center

Richardson, Craig H.

This paper discusses common causes of problems encountered with audio systems in distance learning networks and offers practical suggestions for correcting the problems. Problems and discussions are divided into nine categories: (1) acoustics, including reverberant classrooms leading to distorted or garbled voices, as well as one-dimensional audio…

Fix and forget or fix and report: a qualitative study of tensions at the front line of incident reporting.

PubMed

Hewitt, Tanya Anne; Chreim, Samia

2015-05-01

Practitioners frequently encounter safety problems that they themselves can resolve on the spot. We ask: when faced with such a problem, do practitioners fix it in the moment and forget about it, or do they fix it in the moment and report it? We consider factors underlying these two approaches. We used a qualitative case study design employing in-depth interviews with 40 healthcare practitioners in a tertiary care hospital in Ontario, Canada. We conducted a thematic analysis, and compared the findings with the literature. 'Fixing and forgetting' was the main choice that most practitioners made in situations where they faced problems that they themselves could resolve. These situations included (A) handling near misses, which were seen as unworthy of reporting since they did not result in actual harm to the patient, (B) prioritising solving individual patients' safety problems, which were viewed as unique or one-time events and (C) encountering re-occurring safety problems, which were framed as inevitable, routine events. In only a few instances was 'fixing and reporting' mentioned as a way that the providers dealt with problems that they could resolve. We found that generally healthcare providers do not prioritise reporting if a safety problem is fixed. We argue that fixing and forgetting patient safety problems encountered may not serve patient safety as well as fixing and reporting. The latter approach aligns with recent calls for patient safety to be more preventive. We consider implications for practice. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Waste Preparation and Transport Chemistry: Results of the FY 2001 Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, R.D.

2002-03-25

During FY 2001, tank farm operations at Hanford and the Savannah River Site (SRS) continued to be negatively impacted by the unintended formation of solids. At Hanford, the primary solids formation problem involves a series of plugged pipes and pumps during the saltwell pumping activities of the interim stabilization program. For example, transfers of tank S-102 waste were suspended due to a plugged pipeline or a mechanical problem with the transfer pump. The replacement pump then failed within 2 weeks. In contrast, since full-scale waste remediation activities such as vitrification were initiated, the SRS has encountered a wider range ofmore » problems due to unwanted solids. The 2H evaporator system was shut down because of the formation of aluminosilicate deposits with enriched uranium in the evaporator pot. While high concentrations of aluminum are expected in the tank waste due to previous canyon operations, the primary source of silicon is the recycle stream from the vitrifier. While solids formation can be expected when waste streams are combined, the formation of the aluminosilicate deposits required an elevated temperature within the evaporator. The shutdown of the 2H evaporator led to a severe shortage of tank space. Therefore, the SRS tank farm was forced to transfer highly concentrated waste, which led to a plugged transfer pump in tank 32. For each of the proposed cesium removal technologies for the SRS, unwanted solids formation occurred during the large laboratory-scale tests prior to the final selection of the solvent extraction process. It can be expected that further problems will be encountered as more unit operations of the remediation effort are deployed and as more waste streams are combined. Since these problems have already led to costly schedule delays, the tank farm operators at both sites have identified the prevention of solids formation as a high-priority need. In response to this need, the Tank Focus Area has assembled a team of researchers of researchers from AEA Technology, Florida International University (FIU), Fluor Hanford, Mississippi State University (MSU), Oak Ridge National Laboratory (ORNL), and Savannah River Technology Center (SRTC) to evaluate various aspects of the waste preparation and transport chemistry. The majority of this effort was focused on saltcake dissolution and saltwell pumping. The results of the AEA Technology, FIU, and MSU studies of saltcake dissolution and slurry transfers for Hanford are discussed in detail in a companion report prepared by T. D. Welch in 2001 (ORNIJTM-2001097). Staff members at Fluor Hanford have continued to conduct saltcake dissolution tests on actual tank waste (documented in reports prepared by D. L. Herting in 2000 and 2001). It should be noted that full-scale saltcake dissolution at Hanford is scheduled to begin in FY 2002. While the Hanford effort is focused on the transfer of waste from one tank to another, the objective of the SRTC study is the formation of aluminosilicates at elevated temperatures, which are present in the waste evaporator.« less

Rocket Engine Oscillation Diagnostics

NASA Technical Reports Server (NTRS)

Nesman, Tom; Turner, James E. (Technical Monitor)

2002-01-01

Rocket engine oscillating data can reveal many physical phenomena ranging from unsteady flow and acoustics to rotordynamics and structural dynamics. Because of this, engine diagnostics based on oscillation data should employ both signal analysis and physical modeling. This paper describes an approach to rocket engine oscillation diagnostics, types of problems encountered, and example problems solved. Determination of design guidelines and environments (or loads) from oscillating phenomena is required during initial stages of rocket engine design, while the additional tasks of health monitoring, incipient failure detection, and anomaly diagnostics occur during engine development and operation. Oscillations in rocket engines are typically related to flow driven acoustics, flow excited structures, or rotational forces. Additional sources of oscillatory energy are combustion and cavitation. Included in the example problems is a sampling of signal analysis tools employed in diagnostics. The rocket engine hardware includes combustion devices, valves, turbopumps, and ducts. Simple models of an oscillating fluid system or structure can be constructed to estimate pertinent dynamic parameters governing the unsteady behavior of engine systems or components. In the example problems it is shown that simple physical modeling when combined with signal analysis can be successfully employed to diagnose complex rocket engine oscillatory phenomena.

Interim report : a non-overlay cathodic protection system.

DOT National Transportation Integrated Search

1983-01-01

This interim report describes Virginia's experience in installing its first cathodic protection system for a bridge deck. The installation was completed with practically no problems. Very minor problems have been encountered with the rectifier/contro...

Telecommunications and data acquisition systems support for Voyager missions to Jupiter and Saturn, 1972-1981, prelaunch through Saturn encounter

NASA Technical Reports Server (NTRS)

Traxler, M. R.; Beauchamp, D. F.

1983-01-01

The Deep Space Network has supported the Voyager Project for approximately nine years, during which time implementation, testing, and operational support was provided. Four years of this time involved testing prior to launch; the final five years included network operations support and additional network implementation. Intensive and critical support intervals included launch and four planetary encounters. The telecommunications and data acquisition support for the Voyager Missions to Jupiter and Saturn are summarized.

Investigation of fatigue by Australian general practice registrars: a cross-sectional study.

PubMed

Morgan, Simon; Henderson, Kim M; Tapley, Amanda; Thomson, Allison; Wilson, Jessica; Scott, John; Spike, Neil A; McArthur, Lawrie; van Driel, Mieke L; Magin, Parker J

2015-06-01

Fatigue is the most common undifferentiated problem presenting in general practice. Previous studies have shown that this presentation leads to multiple investigations. There is no published literature describing the management of patients with fatigue by general practice (GP) registrars. To document the investigation-ordering behaviour of GP registrars in managing patients with a new diagnosis of unexplained fatigue. This was a cross-sectional analysis of data from Registrar Clinical Encounters in Training (ReCEnT), an ongoing cohort study of GP registrars' consultations. We established the prevalence of new diagnoses of unexplained fatigue and associations with that diagnosis, the rate of test ordering and the number and types of investigations ordered. 644 registrars contributed data from 68 986 encounters. In 0.78% of patient encounters, a new diagnosis of unexplained fatigue was made. Pathology was ordered in 78.4% of these problems (versus 18.1% in non-fatigue problems), at a rate of 488 tests per 100 new fatigue problems. Our study suggests that unexplained fatigue elicits a non-rational approach to test ordering by registrars. These findings contribute to the understanding of GP registrar management of fatigue, and undifferentiated presentations more broadly, and suggest educational approaches to improve practice, including dealing with uncertainty.

[Ethics in clinical practice and in health care].

PubMed

Pintor, S; Mennuni, G; Fontana, M; Nocchi, S; Giarrusso, P; Serio, A; Fraioli, A

2015-01-01

The clinical ethics is the identification, analysis and solution of moral problems that can arise during the care of a patient. Given that when dealing with ethical issues in health care some risks will be encountered (talking about ethics in general, or as a problem overlapped with others in this area, or by delegation to legislative determinations) in the text certain important aspects of the topic are examined. First of all ethics as human quality of the relationship between people for the common good, especially in health services where there are serious problems like the life and the health. It is also necessary a "humanizing relationship" between those who work in these services in order to achieve quality and efficiency in this business. It is important a proper training of health professionals, especially doctors, so that they can identify the real needs and means of intervention. It is also important that scientific research must respect fundamental ethical assumptions. In conclusion, ethics in health care is not a simple matter of "cookbook" rules, but involves the responsibility and consciousness of individual operators.

Role of Enhancing Visual Effects Education Delivery to Encounter Career Challenges in Malaysia

ERIC Educational Resources Information Center

Ng, Lynn-Sze

2017-01-01

Problem-based Learning (PBL) is one of the most effective methods of instruction that helps Visual Effects (VFX) students to be more adaptable at encountering career challenges in Malaysia. These challenges are; lack of several important requirements such as, the basic and fundamental knowledge of VFX concepts, the ability to understand real-world…

Problem Solving Skills for Children.

ERIC Educational Resources Information Center

Youngs, Bettie B.

This guide was written for children, to help them handle problems they might encounter, learn about other children and how they have handled similar problems, and learn what to do when things go wrong or when they feel misunderstood. In the introduction, children are assured that, even when they have problems, they can be happy again. The body of…

Problem Solving Instruction for Overcoming Students' Difficulties in Stoichiometric Problems

ERIC Educational Resources Information Center

Shadreck, Mandina; Enunuwe, Ochonogor Chukunoye

2017-01-01

The study sought to find out difficulties encountered by high school chemistry students when solving stoichiometric problems and how these could be overcome by using a problem-solving approach. The study adopted a quasi-experimental design. 485 participants drawn from 8 highs schools in a local education district in Zimbabwe participated in the…

Alcohol and Other Drugs on Campus: The Scope of the Problem. Infofacts/Resources

ERIC Educational Resources Information Center

Kapner, Daniel Ari

2008-01-01

The most widespread health problem on college and university campuses in the United States is high-risk alcohol and other drug (AOD) use. Recent reports confirm that the nation's campuses continue to encounter significant consequences as a result of this problem. This "Infofacts/Resources" offers an overview of the problem and highlights effective…

Conceptualizing Perseverance in Problem Solving as Collective Enterprise

ERIC Educational Resources Information Center

Sengupta-Irving, Tesha; Agarwal, Priyanka

2017-01-01

Students are expected to learn mathematics such that when they encounter challenging problems they will persist. Creating opportunities for students to persist in problem solving is therefore argued as essential to effective teaching and to children developing positive dispositions in mathematical learning. This analysis takes a novel approach to…

Financial Stress, Parental Depressive Symptoms, Parenting Practices, and Children's Externalizing Problem Behaviors: Underlying Processes

ERIC Educational Resources Information Center

Lee, Chih-Yuan Steven; Lee, Jaerim; August, Gerald J.

2011-01-01

This study examined the relationships among financial stress encountered by families, parents' social support, parental depressive symptoms, parenting practices, and children's externalizing problem behaviors to advance our understanding of the processes by which family financial stress is associated with children's problem behaviors. We also…

Problem Solving.

ERIC Educational Resources Information Center

Pollak, Ave

This guide is intended for use in presenting a three-session course designed to develop the problem-solving skills required of persons employed in the manufacturing and service industries. The course is structured so that, upon its completion, students will be able to accomplish the following: describe and analyze problems encountered at work;…

Twenty Recent Novels (and More) about Adolescents for Bibliotherapy.

ERIC Educational Resources Information Center

Hipple, Ted; Comer, Melissa; Boren, Dodie

1997-01-01

Lists 20 problems adolescents may encounter, with a description of one young adult novel in which that problem is a central feature. Some of the problems addressed include abuse, AIDS, alcohol, alienation, crime, death, disabilities, divorce, drugs, ethics, homosexuality, peer pressure, pregnancy, prejudice, rape, religious pressure, school, sex,…

Support Services for Remote Users of Online Public Access Catalogs.

ERIC Educational Resources Information Center

Kalin, Sally W.

1991-01-01

Discusses the needs of remote users of online public access catalogs (OPACs). User expectations are discussed; problems encountered by remote-access users are examined, including technical problems and searching problems; support services are described, including instruction, print guides, and online help; and differences from the needs of…

Exploring Principals' Nonroutine Problems in Bilingual Immersion Schools: Lessons Learned for Multicultural Leadership

ERIC Educational Resources Information Center

Schwabsky, Nitza

2013-01-01

The present study examines the nonroutine problems that eight Anglo-American principals encountered in managing three elementary bilingual immersion schools in the Northwest United States. Using qualitative inquiry to collect data, I employed the multisited ethnographic research model. The principals reported nonroutine problems in the following…

Another Look at the Language Difficulties of International Students

ERIC Educational Resources Information Center

Zhang, Yanyin; Mi, Yinan

2010-01-01

International students encounter language-related problems in their academic studies. Specific problem areas have been identified and possible underlying causes have been explored. The present study investigates the impact of two variables--length of study and academic disciplines--in relation to the problems. The findings from a survey and…

The in-house education of clinical clerks in surgery and the role of housestaff.

PubMed

Minor, Sam; Poenaru, Dan

2002-11-01

While on surgical rotations, clinical clerks spend more time on the ward and in the emergency department than in any other location. Consequently, their in-house experience is of great importance to their education-yet the teaching processes in these settings have never been fully explored. Unlike the structured pre-clerkship years, the exact breakdown of a clerk's hospital-based education is difficult to elucidate. To effectively evaluate a clerkship curriculum, it is essential to know what clerks are being taught outside of seminars, how that teaching occurs, and by whom. This study proposes a methodology by which a surgical clerkship curriculum can be evaluated. For the purpose of the study, surgery clerks carried written and audio logs of their informal teaching encounters during one on-call period (30 hours). These included who taught them, where, by what methods, for how long, and what prompted the teaching. A survey of similar variables was administered to all clerks who rotated through general surgery over 4 months and to all general surgery residents. Four clerks returned completed logs (100% response rate), and 17 clerks (85% response) and 15 residents (100% response) were surveyed. Audiotaped and written logs were similar, demonstrating good recall. Students recorded an average of 11 teaching encounters (range 3 to 20) per 30 hour period, lasting a total of 73 minutes (range 17 to 178) and each 6.7 +/- 14 minutes long. Both logs and surveys identified most teaching as unsolicited, done mostly by junior and chief residents, focused chiefly on diagnosis and using a Socratic style. Most teaching occurred in the operating room, yet its occurrence was unpredictable; in surveys the emergency room and clinic settings were perceived as more important. Staff surgeons contributed 27% of the logged encounters yet were perceived in surveys as the least contributors. Residents' and clerks' perceptions of teaching were similar except for residents overvaluing the amount of senior teaching (P = 0.04). The resident level correlated significantly with the comfort of teaching (r = 0.618, P = 0.04). Senior residents encouraged more problem-solving, whereas juniors favored minilectures. Only one resident had received formal teaching instruction. Informal teaching of surgery clerks is variable and occurs through multiple short encounters in many settings and by various trainees. Efforts to improve the teaching process should focus on providing formal teaching instruction early in residency, specifically geared toward short encounters in flexible settings. Both the operating room as a learning environment and staff surgeons as informal teachers must be intentionally integrated into the teaching process.

Multi-Agent Modeling and Simulation Approach for Design and Analysis of MER Mission Operations

NASA Technical Reports Server (NTRS)

Seah, Chin; Sierhuis, Maarten; Clancey, William J.

2005-01-01

A space mission operations system is a complex network of human organizations, information and deep-space network systems and spacecraft hardware. As in other organizations, one of the problems in mission operations is managing the relationship of the mission information systems related to how people actually work (practices). Brahms, a multi-agent modeling and simulation tool, was used to model and simulate NASA's Mars Exploration Rover (MER) mission work practice. The objective was to investigate the value of work practice modeling for mission operations design. From spring 2002 until winter 2003, a Brahms modeler participated in mission systems design sessions and operations testing for the MER mission held at Jet Propulsion Laboratory (JPL). He observed how designers interacted with the Brahms tool. This paper discussed mission system designers' reactions to the simulation output during model validation and the presentation of generated work procedures. This project spurred JPL's interest in the Brahms model, but it was never included as part of the formal mission design process. We discuss why this occurred. Subsequently, we used the MER model to develop a future mission operations concept. Team members were reluctant to use the MER model, even though it appeared to be highly relevant to their effort. We describe some of the tool issues we encountered.

Transit security : a description of problems and countermeasures

DOT National Transportation Integrated Search

1984-10-01

This report provides a broad perspective on transit security. It examines a wide range of transit security problems encountered by transit systems, namely: crime against passengers and employees; crimes involving revenues, including fare evasion by p...

Adaptation of Social Problem Solving for Children Questionnaire in 6 Age Groups and its Relationships with Preschool Behavior Problems

ERIC Educational Resources Information Center

Dereli-Iman, Esra

2013-01-01

Social Problem Solving for Child Scale is frequently used to determine behavioral problems of children with their own word and to identify ways of conflict encountered in daily life, and interpersonal relationships in abroad. The primary purpose of this study was to adapt the Wally Child Social Problem-Solving Detective Game Test. In order to…

Statistical Survey of Icing Data Measured on Scheduled Airline Flights over the United States and Canada from November 1951 to June 1952

NASA Technical Reports Server (NTRS)

Perkins, Porter J

1955-01-01

A statistical survey and a preliminary analysis are made of icing data collected from scheduled flights over the United States and Canada from November 1951 to June 1952 by airline aircraft equipped with NACA pressure-type icing-rate meters. This interim report presents information obtained from a continuing program sponsored by the NACA with the cooperation of the airlines. An analysis of over 600 icing encounters logged by three airlines operating in the United States, one operating in Canada and one operating up the coast to Alaska, is presented. The icing conditions encountered provided relative frequencies of many icing-cloud variables, such as horizontal extent, vertical thickness, temperatures, icing rate, liquid-water content, and total ice accumulation. Liquid-water contents were higher than data from earlier research flights in layer-type clouds but slightly lower than previous data from cumulus clouds. Broken-cloud conditions, indicated by intermittent icing, accounted for nearly one-half of all the icing encounters. About 90 percent of the encounters did not exceed a distance of 120 miles, and continuous icing did not exceed 50 miles for 90 percent of the unbroken conditions. Icing cloud thicknesses measured during climbs and descents were less than 4500 feet for 90 percent of the vertical cloud traverses.

Lattice Boltzmann computation of creeping fluid flow in roll-coating applications

NASA Astrophysics Data System (ADS)

Rajan, Isac; Kesana, Balashanker; Perumal, D. Arumuga

2018-04-01

Lattice Boltzmann Method (LBM) has advanced as a class of Computational Fluid Dynamics (CFD) methods used to solve complex fluid systems and heat transfer problems. It has ever-increasingly attracted the interest of researchers in computational physics to solve challenging problems of industrial and academic importance. In this current study, LBM is applied to simulate the creeping fluid flow phenomena commonly encountered in manufacturing technologies. In particular, we apply this novel method to simulate the fluid flow phenomena associated with the "meniscus roll coating" application. This prevalent industrial problem encountered in polymer processing and thin film coating applications is modelled as standard lid-driven cavity problem to which creeping flow analysis is applied. This incompressible viscous flow problem is studied in various speed ratios, the ratio of upper to lower lid speed in two different configurations of lid movement - parallel and anti-parallel wall motion. The flow exhibits interesting patterns which will help in design of roll coaters.

A Fourteen-Year Experience with Vascular Anomalies Encountered during Transaxillary Rib Resection for Thoracic Outlet Syndrome.

PubMed

Yi, Jeniann A; Johnston, Robert J; Nehler, Mark R; Gibula, Douglas R; Alix, Kristen; Glebova, Natalia O; Brantigan, Charles O

2017-04-01

Transaxillary approach to first rib resection and scalenectomy (TAFRRS) is a well-established technique for treatment of thoracic outlet syndrome (TOS). Although anatomic features encountered during TAFRRS are in general constant, vascular anomalies may be encountered but have not been described to date. Herein we describe vascular abnormalities encountered during TAFRRS. We performed a retrospective review of a prospective practice database of 224 operations for TOS performed in 172 patients from March 2000 to March 2014. We excluded 10 patients with missing operative reports, 3 reoperations on the same patient, and 8 non-transaxillary resections. We recorded vascular anomalies identified in operative reports and reviewed computed tomography imaging to delineate the nature of these abnormalities. The overall incidence of vascular anomalies was 11% (22 of 203 TAFRRS). Most patients with anomalies had venous TOS (vTOS) (9 patients, 41%), followed by 7 (32%) with neurogenic TOS (nTOS). The remainder of the patients had arterial TOS (aTOS) (6 patients, 27%). Seven patients (32%) had an abnormal subclavian artery (SCA) with 5 (23%) having an abnormal arterial course in the anterior scalene muscle (ASM); 6 patients (27%) had an abnormal internal mammary artery (IMA) originating from distal SCA; 4 (18%) had abnormalities in the supreme thoracic artery (bifurcation or duplication); 2 (9%) had an abnormal branch from the SCA with anomalous location in the operative field; and 3 (14%) had an abnormal large venous branch penetrating the ASM. In the 19 patients with arterial anomalies, 8 (42%) were recognized as arterial branches penetrating the ASM, and 11 (58%) were noticed as they had anomalous arterial locations within the operative field. Most arterial anomalies were seen in vTOS (9, 45%), followed by nTOS (7, 35%). No intraoperative vascular complications occurred. Perioperative complications included 1 occurrence of postoperative transfusion for bleeding following axillary drain discontinuation and 2 Horner's syndromes. One aberrant IMA was electively ligated to allow complete thoracic outlet decompression. Arterial anomalies during TAFRRS are encountered in 11% of operations, and may present with vessel locations in unusual areas within the operative field, or as abnormal vessels penetrating the ASM, thus making scalenectomy precarious. Careful attention must be paid to possible abnormal locations of vessels in the thoracic outlet to avoid bleeding complications. Copyright © 2016 Elsevier Inc. All rights reserved.

Reasons for encounter and disease patterns in Danish primary care: changes over 16 years.

PubMed

Moth, Grete; Olesen, Frede; Vedsted, Peter

2012-06-01

Approximately 98% of Danish citizens are listed with a general practice which they consult for medical advice. Although 85% of the population contact their general practitioner (GP) every year, little is known about these contacts. The aim of the present paper is to gain updated knowledge about patients' reasons for encounter and the GP activities and to make comparisons with a similar study from 1993. All GPs in the Central Denmark Region were invited to register all contacts during one randomly chosen day within a year. The registration included questions about patients' reasons for encounter, the types and contents of the contacts, referrals, and distribution between new episodes and follow-up contacts. Aggregated data were compared with the results from 1993. A total of 404 (46%) GPs participated. The number of contacts per 1000 inhabitants had risen by 19.7%. The reasons for encounter and final diagnoses resembled those in 1993. Musculoskeletal, psychological, and respiratory problems were the most common reasons for encounter, psychological problems being the only type to increase over the period. Interestingly, the proportion of diagnoses within the ICPC 'A' chapter rose from 13.5 to 19.7%. The referral rate rose by 2% (relative: 18.7%) from 10.7% to 12.7% and the share of follow-up contacts rose from 45.9% to 50.4% (relative: 8.7%). Quite small changes were seen in the patterns of reasons for encounter and diagnoses from 1993 to 2009. However, an increase was found in contacts with general practice and referrals and in the proportion of follow-ups.

An analysis of the cultural problems encountered during caregiving by the nurses working in two different regions of Turkey.

PubMed

Kilic, Serap Parlar; Besen, Dilek Buyukkaya; Tokem, Yasemin; Fadiloglu, Cicek; Karadag, Gulendam

2014-06-01

The aim of this study was to identify the cultural problems encountered during caregiving by the nurses working in two university hospitals located in western and eastern Turkey. This descriptive, comparative study was conducted between July 2008 and October 2009 with 338 nurses who volunteered to take part in the study. The study data were collected using an individual description questionnaire consisting of 10 questions and another questionnaire consisting of 14 questions to identify the cultural problems encountered by nurses when giving care. The study showed with respect to training received on transcultural nursing that only 59 nurses had this training, but the percentage was higher in the nurses working at the hospital in the west (54.2%) (P > 0.05). It was found that a large number of nurses in the sample group (n = 286) gave care to at least one individual from another culture, but the percentage was significantly higher in the nurses working in the west (56.7%) than in the nurses working in the east (43.3%) (P < 0.05). When the problems experienced by the nurses during caregiving because of cultural characteristics of patients were explored, it was found that they experienced problems mostly in 'communication', and the percentage of those having problems was higher in the nurses working in the west (60.8%) (P > 0.05). The problem experienced in this area was mostly because of the fact that patients 'did not speak Turkish' (63.8%). In conclusion, the nurses gave care to patients from different cultures, and most of them had trouble when giving care to patients from different cultures. © 2013 Wiley Publishing Asia Pty Ltd.

Radio science ground data system for the Voyager-Neptune encounter, part 1

NASA Technical Reports Server (NTRS)

Kursinski, E. R.; Asmar, S. W.

1991-01-01

The Voyager radio science experiments at Neptune required the creation of a ground data system array that includes a Deep Space Network complex, the Parkes Radio Observatory, and the Usuda deep space tracking station. The performance requirements were based on experience with the previous Voyager encounters, as well as the scientific goals at Neptune. The requirements were stricter than those of the Uranus encounter because of the need to avoid the phase-stability problems experienced during that encounter and because the spacecraft flyby was faster and closer to the planet than previous encounters. The primary requirement on the instrument was to recover the phase and amplitude of the S- and X-band (2.3 and 8.4 GHz) signals under the dynamic conditions encountered during the occultations. The primary receiver type for the measurements was open loop with high phase-noise and frequency stability performance. The receiver filter bandwidth was predetermined based on the spacecraft's trajectory and frequency uncertainties.

Some problems of the design of highly directional spacecraft antennas

NASA Technical Reports Server (NTRS)

Prigoda, B. A.

1974-01-01

Problems of optimization and selection of the most expedient forms of design of directional antenna systems encountered in spacecraft design are discussed. Selection of a given type of antenna depends on its characteristic size, weight, and potential.

Community Work and Local Authority Decision Making: Potential and Problems

ERIC Educational Resources Information Center

Corina, Lewis

1976-01-01

British local authority and decision making procedures are described for community developers. Included are potential ways of influencing the authority system, and problems and areas of weakness that may be encountered in dealing with the system. (ABM)

The Influence of Problems Faced during Internships on Interns' Views of Their Profession and Their Intention to Work in the Tourism Industry

ERIC Educational Resources Information Center

Kasli, Mehmet; Ilban, Mehmet Oguzhan

2013-01-01

Problem Statement: The problem of this research is identifying the difficulties that undergraduate students experience during their internships and assessing their future intention to work in the tourism industry. Purpose of Study: This research aims to identify the problems undergraduate students encounter as interns in tourism programs and to…

Acts of Attention: An Exploration of Teacher Candidates' Attention to Educational Encounters, and How It Relates to Task Formulation

ERIC Educational Resources Information Center

Harvey, Victoria A.

2015-01-01

This study begins with the belief that the ways in which teachers see and attend to educational encounters matter for their actions in classrooms. Using microethnography as a framework, this dissertation explores the relationship between teacher candidate attention, problem formulation, and action. Through analysis of the M.Ed. inquiry reports of…

Unethical Behaviours Preservice Teachers Encounter on Social Networks

ERIC Educational Resources Information Center

Deveci Topal, Arzu; Kolburan Gecer, Aynur

2015-01-01

The development of web 2.0 technology has resulted in an increase in internet sharing. The scope of this study is social networking, which is one of the web 2.0 tools most heavily used by internet users. In this paper, the unethical behaviours that preservice teachers encounter on social networks and the ways to deal with these problems are…

Evaluating thermoregulation in reptiles: the fallacy of the inappropriately applied method.

PubMed

Seebacher, Frank; Shine, Richard

2004-01-01

Given the importance of heat in most biological processes, studies on thermoregulation have played a major role in understanding the ecology of ectothermic vertebrates. It is, however, difficult to assess whether body temperature is actually regulated, and several techniques have been developed that allow an objective assessment of thermoregulation. Almost all recent studies on reptiles follow a single methodology that, when used correctly, facilitates comparisons between species, climates, and so on. However, the use of operative temperatures in this methodology assumes zero heat capacity of the study animals and is, therefore, appropriate for small animals only. Operative temperatures represent potentially available body temperatures accurately for small animals but can substantially overestimate the ranges of body temperature available to larger animals whose slower rates of heating and cooling mean that they cannot reach equilibrium if they encounter operative temperatures that change rapidly through either space or time. This error may lead to serious misinterpretations of field data. We derive correction factors specific for body mass and rate of movement that can be used to estimate body temperature null distributions of larger reptiles, thereby overcoming this methodological problem.

SHARP: A multi-mission artificial intelligence system for spacecraft telemetry monitoring and diagnosis

NASA Technical Reports Server (NTRS)

Lawson, Denise L.; James, Mark L.

1989-01-01

The Spacecraft Health Automated Reasoning Prototype (SHARP) is a system designed to demonstrate automated health and status analysis for multi-mission spacecraft and ground data systems operations. Telecommunications link analysis of the Voyager 2 spacecraft is the initial focus for the SHARP system demonstration which will occur during Voyager's encounter with the planet Neptune in August, 1989, in parallel with real time Voyager operations. The SHARP system combines conventional computer science methodologies with artificial intelligence techniques to produce an effective method for detecting and analyzing potential spacecraft and ground systems problems. The system performs real time analysis of spacecraft and other related telemetry, and is also capable of examining data in historical context. A brief introduction is given to the spacecraft and ground systems monitoring process at the Jet Propulsion Laboratory. The current method of operation for monitoring the Voyager Telecommunications subsystem is described, and the difficulties associated with the existing technology are highlighted. The approach taken in the SHARP system to overcome the current limitations is also described, as well as both the conventional and artificial intelligence solutions developed in SHARP.

Demonstration test of burner liner strain measuring system

NASA Technical Reports Server (NTRS)

Stetson, K. A.

1984-01-01

A demonstration test was conducted for two systems of static strain measurement that had been shown to have potential for application jet engine combustors. A modified JT12D combustor was operated in a jet burner test stand while subjected simultaneously to both systems of instrumentation, i.e., Kanthal A-1 wire strain gages and laser speckle photography. A section of the burner was removed for installation and calibration of the wire gages, and welded back into the burner. The burner test rig was modified to provide a viewing port for the laser speckle photography such that the instrumented section could be observed during operation. Six out of ten wire gages survived testing and showed excellent repeatability. The extensive precalibration procedures were shown to be effective in compensating for the large apparent strains associated with these gages. Although all portions of the speckle photography system operated satisfactorily, a problem was encountered in the form of optical inhomogeneities in the hot, high-pressure gas flowing by the combustor case which generate large and random apparent strain distributions.

SHARP: A multi-mission AI system for spacecraft telemetry monitoring and diagnosis

NASA Technical Reports Server (NTRS)

Lawson, Denise L.; James, Mark L.

1989-01-01

The Spacecraft Health Automated Reasoning Prototype (SHARP) is a system designed to demonstrate automated health and status analysis for multi-mission spacecraft and ground data systems operations. Telecommunications link analysis of the Voyager II spacecraft is the initial focus for the SHARP system demonstration which will occur during Voyager's encounter with the planet Neptune in August, 1989, in parallel with real-time Voyager operations. The SHARP system combines conventional computer science methodologies with artificial intelligence techniques to produce an effective method for detecting and analyzing potential spacecraft and ground systems problems. The system performs real-time analysis of spacecraft and other related telemetry, and is also capable of examining data in historical context. A brief introduction is given to the spacecraft and ground systems monitoring process at the Jet Propulsion Laboratory. The current method of operation for monitoring the Voyager Telecommunications subsystem is described, and the difficulties associated with the existing technology are highlighted. The approach taken in the SHARP system to overcome the current limitations is also described, as well as both the conventional and artificial intelligence solutions developed in SHARP.

Having the Memory of an Elephant: Long-Term Retrieval and the Use of Analogues in Problem Solving

ERIC Educational Resources Information Center

Chen, Zhe; Mo, Lei; Honomichl, Ryan

2004-01-01

The authors report 4 experiments exploring long-term analogical transfer from problem solutions in folk tales participants heard during childhood, many years before encountering the target problems. Substantial culture-specific analogical transfer was found when American and Chinese participants' performance was compared on isomorphs of problems…

Applying an Information Problem-Solving Model to Academic Reference Work: Findings and Implications.

ERIC Educational Resources Information Center

Cottrell, Janet R.; Eisenberg, Michael B.

2001-01-01

Examines the usefulness of the Eisenberg-Berkowitz Information Problem-Solving model as a categorization for academic reference encounters. Major trends in the data include a high proportion of questions about location and access of sources, lack of synthesis or production activities, and consistent presence of system problems that impede the…

Data System Implementation: A Leader Navigates People Problems around Technology and Data Use

ERIC Educational Resources Information Center

Cho, Vincent; Jimerson, Jo Beth; Wayman, Jeffrey C.

2015-01-01

Computer data systems have become a lynchpin to supporting school data use. However, successfully implementing such systems is no easy task. In this case, readers explore the ways in which "technology problems" and "people problems" can be intertwined. The case follows Dr. Molly Winters as she encounters social and…

Why Do Disadvantaged Filipino Children Find Word Problems in English Difficult?

ERIC Educational Resources Information Center

Bautista, Debbie; Mulligan, Joanne

2010-01-01

Young Filipino students are expected to solve mathematical word problems in English, a language that many encounter only in schools. Using individual interviews of 17 Filipino children, we investigated why word problems in English are difficult and the extent to which the language interferes with performance. Results indicate that children could…

School Nurses' Perceived Prevalence and Competence to Address Student Mental Health Problems

ERIC Educational Resources Information Center

Stephan, Sharon H.; Connors, Elizabeth H.

2013-01-01

Due to under-identification of student mental health problems and limited specialty mental health providers in schools, school nurses are often faced with identifying and addressing student mental health needs. This exploratory study assessed prevalence and types of student mental health problems encountered by school nurses, as well as their…

Molten salt corrosion of SiC and Si3N4

NASA Technical Reports Server (NTRS)

Jacobson, N. S.; Smialek, J. L.; Fox, D. S.

1986-01-01

The most severe type of corrosion encountered in heat engines is corrosion by molten sodium sulfate, formed by the reaction of ingested sodium chloride and sulfur impurities in the fuel. This problem was studied extensively for superalloys, but only recently examined for ceramics. This problem is addressed with laboratory studies to understand the fundamental reaction mechanisms and with burner studies to provide a more realistic simulation of the conditions encountered in a heat engine. In addition the effect of corrosion on the strengths of these materials was assessed. Each of these aspects will be reviewed and some ideas toward possible solutions will be discussed.

Comparison of Low-Energy Lunar Transfer Trajectories to Invariant Manifolds

NASA Technical Reports Server (NTRS)

Anderson, Rodney L.; Parker, Jeffrey S.

2011-01-01

In this study, transfer trajectories from the Earth to the Moon that encounter the Moon at various flight path angles are examined, and lunar approach trajectories are compared to the invariant manifolds of selected unstable orbits in the circular restricted three-body problem. Previous work focused on lunar impact and landing trajectories encountering the Moon normal to the surface, and this research extends the problem with different flight path angles in three dimensions. The lunar landing geometry for a range of Jacobi constants are computed, and approaches to the Moon via invariant manifolds from unstable orbits are analyzed for different energy levels.

The Voyager spacecraft /James Watt International Gold Medal Lecture/

NASA Technical Reports Server (NTRS)

Heacock, R. L.

1980-01-01

The Voyager Project background is reviewed with emphasis on selected features of the Voyager spacecraft. Investigations by the Thermo-electric Outer Planets Spacecraft Project are discussed, including trajectories, design requirements, and the development of a Self Test and Repair computer, and a Computer Accessed Telemetry System. The design and configuration of the spacecraft are described, including long range communications, attitude control, solar independent power, sequencing and control data handling, and spacecraft propulsion. The development program, maintained by JPL, experienced a variety of problems such as design deficiencies, and process control and manufacturing problems. Finally, the spacecraft encounter with Jupiter is discussed, and expectations for the Saturn encounter are expressed.

A subcutaneous channeling probe for implanting long leads

NASA Technical Reports Server (NTRS)

Lund, G. F.; Simmonds, R. C.; Williams, B. A.

1977-01-01

The channeling probe described in the present paper was designed to overcome surgical problems of the type that were encountered when a multichannel radio transmitter had to be implanted in a cow. The probe was made of a flexible but sufficiently stiff 9.5-mm-diam nylon rod, consisting of 46-cm sections for convenience in sterilization and surgical handling. Stainless steel sleaves reinforced the threaded connecting joints. At one end, arrowhead-shaped channeling heads could be attached to produce wide channels for large sensors. The other end was tapered for narrow channels. Postoperative problems were not encountered in the use of this probe in cows, sheep, and dogs.

Understanding Social and Legal Justice Issues for Aboriginal Women within the Context of an Indigenous Australian Studies Classroom: A Problem-Based Learning Approach

ERIC Educational Resources Information Center

Mackinlay, Elizabeth; Thatcher, Kristy; Seldon, Camille

2004-01-01

Problem-based learning (PBL) is a pedagogical approach in which students encounter a problem and systematically set about finding ways to understand the problem through dialogue and research. PBL is an active process where students take responsibility for their learning by asking their own questions about the problem and in this paper we explore…

Administrative encounters in general practice: low value or hidden value care?

PubMed

Trevena, Lyndal J; Harrison, Christopher; Britt, Helena C

2018-02-19

To determine the frequency of general practice administrative encounters, and to determine whether they represent low value care. Secondary analysis of data from the Bettering Evaluation and Care of Health (BEACH) dataset. 1 568 100 GP-patient encounters in Australia, 2000-01 to 2015-16. An annual nationally representative random sample of about 1000 GPs, who each recorded the details of 100 consecutive encounters with patients. Proportions of general practice encounters that were potentially low value care encounters (among the patient's reasons for the encounter was at least one administrative, medication, or referral request) and potentially low value care only encounters (such reasons were the sole reason for the encounter). For 2015-16, we also examined other health care provided by GPs at these encounters. During 2015-16, 18.5% (95% CI, 17.7-19.3%) of 97 398 GP-patient encounters were potentially low value care request encounters; 7.4% (95% CI, 7.0-7.9%) were potentially low value care only encounters. Administrative work was requested at 3.8% (95% CI, 3.5-4.0%) of GP visits, 35.4% of which were for care planning and coordination, 33.5% for certification, and 31.2% for other reasons. Medication requests were made at 13.1% (95% CI, 12.4-13.7%) of encounters; other health care was provided at 57.9% of medication request encounters, counselling, advice or education at 23.4%, and pathology testing was ordered at 16.7%. Referrals were requested at 2.8% (95% CI, 1.7-3.0%) of visits, at 69.4% of which additional health care was provided. The problems managed most frequently at potentially low value care only encounters were chronic diseases. Most patients requested certificates, medications and referrals in the context of seeking help for other health needs. Additional health care, particularly for chronic diseases, was provided at most GP administrative encounters. The MBS Review should consider the hidden value of these encounters.

Pilots' Information Needs and Strategies for Operating in Icing Conditions

NASA Technical Reports Server (NTRS)

Vigeant-Langlois, Laurence N.; Hansman, R. John

2003-01-01

Pilot current use of icing information, pilot encounters and strategies for dealing with in-flight aircraft structural icing situations, and desired attributes of new icing information systems were investigated through a survey of pilots of several operational categories. The survey identified important information elements and fiequently used information paths for obtaining icing-related information. Free- response questions solicited descriptions of significant , icing encounters, and probed key icing-related decision and information criteria. Results indicated the information needs for the horizontal and vertical location of icing conditions and the identification of icing-free zones.

Standardisation of radiation portal monitor controls and readouts.

PubMed

Tinker, M

2010-10-01

There is an urgent need to standardise the numbering configuration of radiation portal monitor sensing panels. Currently, manufacturers use conflicting numbering schemes that may confuse operators of these varied systems. There is a similar problem encountered with the varied choices of coloured indicator lights and coloured print lines designated for gamma and neutron alarms. In addition, second-party software that changes the alarm colour scheme may also have been installed. Furthermore, no provision exists for the colour blind or to provide work stations with only black ink on alarm printouts. These inconsistencies and confusing set-ups could inadvertently cause a misinterpretation of the alarm, resulting in the potential release of a radiological hazard into a sovereign country. These issues are discussed, and a proposed solution is offered.

Kerosene space heaters--combustion technology and kerosene characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kubayashi, k.; I Wasaki, N.

1984-07-01

This paper describes kerosene combustion technology. Unvented wick-type kerosene space heaters are very popular in Japan because of their economy and convenience. In recent years new vaporized kerosene burners having premixed combustion systems have been developed to solve some of the problems encountered in the older portable type. Some of the features of the new burners are instantaneous ignition, no vaporizing deposit on the burner and a wide range heating capacity. These new kerosene heaters have four major components: an air supply fan, a fuel supply assembly, a burner assembly and a control assembly. These heaters are designed to bemore » highly reliable, have stable combustion characteristics, yield minimum carbon deposit. Finally, they are simple and inexpensive to operate.« less

Helping science to succeed: improving processes in R&D.

PubMed

Sewing, Andreas; Winchester, Toby; Carnell, Pauline; Hampton, David; Keighley, Wilma

2008-03-01

Bringing drugs to the market remains a costly and, until now, often unpredictable challenge. Although understanding the underlying science is key to further progress, our imperfect knowledge of disease and complex biological systems leaves excellence in execution as the most tangible lever to sustain our serendipitous approach to drug discovery. The problems encountered in pharmaceutical R&D are not unique, but to learn from other industries it is important to recognise similarity, rather than differences, and to advance industrialisation of R&D beyond technology and automation. Tools like Lean and Six Sigma, already applied to increase business excellence across diverse organisations, can equally be introduced to pharmaceutical R&D and offer the potential to transform operations without large-scale investment.

Apollo experience report: Guidance and control systems. Engineering simulation program

NASA Technical Reports Server (NTRS)

Gilbert, D. W.

1973-01-01

The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

Low cost solar array project 1: Silicon material

NASA Technical Reports Server (NTRS)

Jewett, D. N.; Bates, H. E.; Hill, D. M.

1980-01-01

The low cost production of silicon by deposition of silicon from a hydrogen/chlorosilane mixture is described. Reactor design, reaction vessel support systems (physical support, power control and heaters, and temperature monitoring systems) and operation of the system are reviewed. Testing of four silicon deposition reactors is described, and test data and consequently derived data are given. An 18% conversion of trichlorosilane to silicon was achieved, but average conversion rates were lower than predicted due to incomplete removal of byproduct gases for recycling and silicon oxide/silicon polymer plugging of the gas outlet. Increasing the number of baffles inside the reaction vessel improved the conversion rate. Plans for further design and process improvements to correct the problems encountered are outlined.

Millimeter wave radars raise weapon IQ

NASA Astrophysics Data System (ADS)

Lerner, E. J.

1985-02-01

The problems encountered by laser and IR homing devices for guided munitions may be tractable with warhead-mounted mm-wave radars. Operating at about 100 GHz and having several kilometers range, mm-wave radars see through darkness, fog, rain and smoke. The radar must be coupled with an analyzer that discerns moving and stationary targets and higher priority targets. The target lock-on can include shut-off of the transmitter and reception of naturally-generated mm-waves bouncing off the target when in the terminal phase of the flight. Monopulse transmitters have simplified the radar design, although mass production of finline small radar units has yet to be accomplished, particularly in combining GaAs, ferrites and other materials on one monolithic chip.

Novel Multidisciplinary Models Assess the Capabilities of Smart Structures to Manage Vibration, Sound, and Thermal Distortion in Aeropropulsion Components

NASA Technical Reports Server (NTRS)

Saravanos, Dimitris A.

1997-01-01

The development of aeropropulsion components that incorporate "smart" composite laminates with embedded piezoelectric actuators and sensors is expected to ameliorate critical problems in advanced aircraft engines related to vibration, noise emission, and thermal stability. To facilitate the analytical needs of this effort, the NASA Lewis Research Center has developed mechanics and multidisciplinary computational models to analyze the complicated electromechanical behavior of realistic smart-structure configurations operating in combined mechanical, thermal, and acoustic environments. The models have been developed to accommodate the particular geometries, environments, and technical challenges encountered in advanced aircraft engines, yet their unique analytical features are expected to facilitate application of this new technology in a variety of commercial applications.

Embodiment design for a multipropellant resistojet

NASA Technical Reports Server (NTRS)

Bao, Johnny; Chilosi, Thierry; Goodwin, Jason; Mocio, Jim; Yeh, Bruce

1993-01-01

This document presents the design of a multipropellant resistojet to use as an auxiliary propulsion system on the Space Station. Such a system is necessary to counteract atmospheric drag effects encountered by the Station in its orbit. NASA specifications are strictly followed with emphasis on reliability, operating life, multipropellant capability, and exhaust emission control. Several design variants are considered, and the final solution is a resistojet with an electronic pressure regulator, variable control, an internal flow heater, and a conical nozzle. To construct the resistojet, the important components are resolved independently and then integrated with secondary units. The document also includes engineering drawings of the final design with assembly instructions. Before final utilization, a prototype testing is recommended to uncover possible problems.

Icing Frequencies Experienced During Climb and Descent by Fighter-Interceptor Aircraft

NASA Technical Reports Server (NTRS)

Perkins, Porter J.

1958-01-01

Data and analyses are presented on the relative frequencies of occurrence and severity of icing cloud layers encountered by jet aircraft in the climb and descent phases of flights to high altitudes. Fighter-interceptor aircraft operated by the Air Defense Command (USAF) at bases in the Duluth and Seattle areas collected the data with icing meters installed for a l-year period. The project was part of an extensive program conducted by the NACA to collect Icing cloud data for evaluating the icing problem relevant to routine operations. The average frequency of occurrence of icing was found to be about 5 percent of the number of climbs and descents during 1 year of operations The icing encounters were predominantly in the low and middle cloud layers, decreasing above 15,000 feet to practically none above 25,000 feet. The greatest thickness of ice that would accumulate on any aircraft component (as indicated by the accretion on a small object) was measured with the icing meters. The ice thicknesses on a small sensing probe averaged less than 1/32 inch and did not exceed 1/2 inch. Such accumulations are relatively small when compared with those that can form during horizontal flight in icing clouds. The light accretions resulted from relatively steep angles of flight through generally thin cloud layers. Because of the limited statistical reliability of the results, an analysis was made using previous statistics on icing clouds below an altitude of 20,000 feet to determine the general icing severity probabilities. The calculations were made using adiabatic lifting as a basis to establish the liquid-water content. Probabilities of over-all ice accretions on a small object as a function of airspeed and rate of climb were computed from the derived water contents. These results were then combined with the probability of occurrence of icing in order to give the icing severity that can be expected for routine aircraft operations.

Multidimensional Simulation Applied to Water Resources Management

NASA Astrophysics Data System (ADS)

Camara, A. S.; Ferreira, F. C.; Loucks, D. P.; Seixas, M. J.

1990-09-01

A framework for an integrated decision aiding simulation (IDEAS) methodology using numerical, linguistic, and pictorial entities and operations is introduced. IDEAS relies upon traditional numerical formulations, logical rules to handle linguistic entities with linguistic values, and a set of pictorial operations. Pictorial entities are defined by their shape, size, color, and position. Pictorial operators include reproduction (copy of a pictorial entity), mutation (expansion, rotation, translation, change in color), fertile encounters (intersection, reunion), and sterile encounters (absorption). Interaction between numerical, linguistic, and pictorial entities is handled through logical rules or a simplified vector calculus operation. This approach is shown to be applicable to various environmental and water resources management analyses using a model to assess the impacts of an oil spill. Future developments, including IDEAS implementation on parallel processing machines, are also discussed.

First UMTA and AoA National Conference on Transportation for the Elderly and Handicapped

DOT National Transportation Integrated Search

1985-05-01

The Conference was highly successful in detailing problems now encountered in : providing transportation services to the elderly and handicapped and in : recommending specific solutions to those problems. There was a strong focus on : realistic, prac...

Motor carrier concerns about transportation problems in Oregon : final report.

DOT National Transportation Integrated Search

2004-03-01

This report summarizes an analysis of data from a statewide survey of freight motor carrier firms, conducted by the Oregon Department of Transportation (ODOT) in the summer of 2001, to identify freight industry concerns about problems they encounter ...

Minding Your Business: How to Avoid the Seven Deadly Financial Pitfalls.

ERIC Educational Resources Information Center

Stephens, Keith

1990-01-01

Describes financial management problems typically encountered by child care center directors and owners. Offers suggestions for planning and management techniques to overcome problems of cash flow, budgeting, rising costs, underpricing, declining revenues, fee collection, and liquidity. (NH)

Long-Life, Lightweight, Multi-Roller Traction Drives for Planetary Vehicle Surface Exploration

NASA Technical Reports Server (NTRS)

Klein, Richard C.; Fusaro, Robert L.; Dimofte, Florin

2012-01-01

NASA s initiative for Lunar and Martian exploration will require long lived, robust drive systems for manned vehicles that must operate in hostile environments. The operation of these mechanical drives will pose a problem because of the existing extreme operating conditions. Some of these extreme conditions include operating at a very high or very cold temperature, operating over a wide range of temperatures, operating in very dusty environments, operating in a very high radiation environment, and operating in possibly corrosive environments. Current drive systems use gears with various configurations of teeth. These gears must be lubricated with oil (or grease) and must have some sort of a lubricant resupply system. For drive systems, oil poses problems such as evaporation, becoming too viscous and eventually freezing at cold temperatures, being too thin to lubricate at high temperatures, being degraded by the radiation environment, being contaminated by the regolith (soil), and if vaporized (and not sealed), it will contaminate the regolith. Thus, it may not be advisable or even possible to use oil because of these limitations. An oil-less, compact traction vehicle drive is a drive designed for use in hostile environments like those that will be encountered on planetary surfaces. Initially, traction roller tests in vacuum were conducted to obtain traction and endurance data needed for designing the drives. From that data, a traction drive was designed that would fit into a prototype lunar rover vehicle, and this design data was used to construct several traction drives. These drives were then tested in air to determine their performance characteristics, and if any final corrections to the designs were necessary. A limitation with current speed reducer systems such as planetary gears and harmonic drives is the high-contact stresses that occur at tooth engagement and in the harmonic drive wave generator interface. These high stresses induce high wear of solid lubricant coatings, thus necessitating the use of liquid lubricants for long life.

Performance Characterization and Vibration Testing of 30-cm Carbon-Carbon Ion Optics

NASA Technical Reports Server (NTRS)

Steven Snyder, John; Brophy, John R.

2004-01-01

Carbon-based ion optics have the potential to significantly increase the operable life and power ranges of ion thrusters because of reduced erosion rates compared to molybdenum optics. The development of 15-cm and larger diameter grids has encountered many problems, however, not the least of which is the ability to pass vibration testing. JPL has recently developed a new generation of 30-cm carbon-carbon ion optics in order to address these problems and demonstrate the viability of the technology. Perveance, electron backstreaming, and screen grid transparency data are presented for two sets of optics. Vibration testing was successfully performed on two different sets of ion optics with no damage and the results of those tests are compared to models of grid vibrational behavior. It will be shown that the vibration model is a conservative predictor of grid response and can accurately describe test results. There was no change in grid alignment as a result of vibration testing and a slight improvement, if any change at all, in optics performance.

Magsat attitude dynamics and control: Some observations and explanations

NASA Technical Reports Server (NTRS)

Stengle, T. H.

1980-01-01

Before its reentry 7 months after launch, Magsat transmitted an abundance of valuable data for mapping the Earth's magnetic field. As an added benefit, a wealth of attitude data for study by spacecraft dynamicists was also collected. Because of its unique configuration, Magsat presented new control problems. With its aerodynamic trim boom, attitude control was given an added dimension. Minimization of attitude drift, which could be mapped in relative detail, became the goal. Momentum control, which was accomplished by pitching the spacecraft in order to balance aerodynamic and gravity gradient torques, was seldom difficult to achieve. Several interesting phenomena observed as part of this activity included occasional momentum wheel instability and a rough correlation between solar flux and the pitch angle required to maintain acceptable momentum. An overview is presented of the attitude behavior of Magsat and some of the control problems encountered. Plausible explanations for some of this behavior are offered. Some of the control philosophy used during the mission is examined and aerodynamic trimming operations are summarized.

User needs for propagation data

NASA Technical Reports Server (NTRS)

Sullivan, Thomas M.

1993-01-01

New and refined models of radio signal propagation phenomena are needed to support studies of evolving satellite services and systems. Taking an engineering perspective, applications for propagation measurements and models in the context of various types of analyses that are of ongoing interest are reviewed. Problems that were encountered in the signal propagation aspects of these analyses are reviewed, and potential solutions to these problems are discussed. The focus is on propagation measurements and models needed to support design and performance analyses of systems in the Mobile-Satellite Service (MSS) operating in the 1-3 GHz range. These systems may use geostationary or non-geostationary satellites and Frequency Division Multiple Access (FDMA), Time Division Multiple Access Digital (TDMA), or Code Division Multiple Access (CDMA) techniques. Many of the propagation issues raised in relation to MSS are also pertinent to other services such as broadcasting-satellite (sound) at 2310-2360 MHz. In particular, services involving mobile terminals or terminals with low gain antennas are of concern.

A design for a new catalog manager and associated file management for the Land Analysis System (LAS)

NASA Technical Reports Server (NTRS)

Greenhagen, Cheryl

1986-01-01

Due to the larger number of different types of files used in an image processing system, a mechanism for file management beyond the bounds of typical operating systems is necessary. The Transportable Applications Executive (TAE) Catalog Manager was written to meet this need. Land Analysis System (LAS) users at the EROS Data Center (EDC) encountered some problems in using the TAE catalog manager, including catalog corruption, networking difficulties, and lack of a reliable tape storage and retrieval capability. These problems, coupled with the complexity of the TAE catalog manager, led to the decision to design a new file management system for LAS, tailored to the needs of the EDC user community. This design effort, which addressed catalog management, label services, associated data management, and enhancements to LAS applications, is described. The new file management design will provide many benefits including improved system integration, increased flexibility, enhanced reliability, enhanced portability, improved performance, and improved maintainability.

MRMAide: a mixed resolution modeling aide

NASA Astrophysics Data System (ADS)

Treshansky, Allyn; McGraw, Robert M.

2002-07-01

The Mixed Resolution Modeling Aide (MRMAide) technology is an effort to semi-automate the implementation of Mixed Resolution Modeling (MRM). MRMAide suggests ways of resolving differences in fidelity and resolution across diverse modeling paradigms. The goal of MRMAide is to provide a technology that will allow developers to incorporate model components into scenarios other than those for which they were designed. Currently, MRM is implemented by hand. This is a tedious, error-prone, and non-portable process. MRMAide, in contrast, will automatically suggest to a developer where and how to connect different components and/or simulations. MRMAide has three phases of operation: pre-processing, data abstraction, and validation. During pre-processing the components to be linked together are evaluated in order to identify appropriate mapping points. During data abstraction those mapping points are linked via data abstraction algorithms. During validation developers receive feedback regarding their newly created models relative to existing baselined models. The current work presents an overview of the various problems encountered during MRM and the various technologies utilized by MRMAide to overcome those problems.

The JPL functional requirements tool

NASA Technical Reports Server (NTRS)

Giffin, Geoff; Skinner, Judith; Stoller, Richard

1987-01-01

Planetary spacecraft are complex vehicles which are built according to many thousands of requirements. Problems encountered in documenting and maintaining these requirements led to the current attempt to reduce or eliminate these problems by a computer automated data base Functional Requirements Tool. The tool developed at JPL and in use on several JPL Projects is described. The organization and functionality of the Tool, together with an explanation of the data base inputs, their relationships, and use are presented. Methods of interfacing with external documents, representation of tables and figures, and methods of approval and change processing are discussed. The options available for disseminating information from the Tool are identified. The implementation of the Requirements Tool is outlined, and the operation is summarized. The conclusions drawn from this work is that the Requirements Tool represents a useful addition to the System Engineer's Tool kit, it is not currently available elsewhere, and a clear development path exists to expand the capabilities of the Tool to serve larger and more complex projects.

Prospects for Vascular Access Education in Developing Countries: Current Situation in Cambodia.

PubMed

Naganuma, Toshihide; Takemoto, Yoshiaki

2017-01-01

We report our activities training doctors on vascular access procedures at International University (IU) Hospital in Cambodia through a program facilitated by Ubiquitous Blood Purification International, a nonprofit organization that provides medical support to developing countries in the field of dialysis medicine. Six doctors from Japan have been involved in the education of medical personnel at IU, and we have collectively visited Cambodia about 15 times from 2010 to 2016. In these visits, we have performed many operations, including 42 for arteriovenous fistula, 1 arteriovenous graft, and 1 percutaneous transluminal angioplasty. Stable development and management of vascular access is increasingly required in Cambodia due to increased use of dialysis therapy, and training of doctors in this technique is urgently required. However, we have encountered several difficulties that need to be addressed, including (1) the situation of personnel receiving this training, (2) problems with facilities, including medical equipment and drugs, (3) financial limitations, and (4) problems with management of vascular access. © 2017 S. Karger AG, Basel.

Development and validation of a low-cost mobile robotics testbed

NASA Astrophysics Data System (ADS)

Johnson, Michael; Hayes, Martin J.

2012-03-01

This paper considers the design, construction and validation of a low-cost experimental robotic testbed, which allows for the localisation and tracking of multiple robotic agents in real time. The testbed system is suitable for research and education in a range of different mobile robotic applications, for validating theoretical as well as practical research work in the field of digital control, mobile robotics, graphical programming and video tracking systems. It provides a reconfigurable floor space for mobile robotic agents to operate within, while tracking the position of multiple agents in real-time using the overhead vision system. The overall system provides a highly cost-effective solution to the topical problem of providing students with practical robotics experience within severe budget constraints. Several problems encountered in the design and development of the mobile robotic testbed and associated tracking system, such as radial lens distortion and the selection of robot identifier templates are clearly addressed. The testbed performance is quantified and several experiments involving LEGO Mindstorm NXT and Merlin System MiaBot robots are discussed.

Current techniques in acid-chloride corrosion control and monitoring at The Geysers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hirtz, Paul; Buck, Cliff; Kunzman, Russell

1991-01-01

Acid chloride corrosion of geothermal well casings, production piping and power plant equipment has resulted in costly corrosion damage, frequent curtailments of power plants and the permanent shut-in of wells in certain areas of The Geysers. Techniques have been developed to mitigate these corrosion problems, allowing continued production of steam from high chloride wells with minimal impact on production and power generation facilities.The optimization of water and caustic steam scrubbing, steam/liquid separation and process fluid chemistry has led to effective and reliable corrosion mitigation systems currently in routine use at The Geysers. When properly operated, these systems can yield steammore » purities equal to or greater than those encountered in areas of The Geysers where chloride corrosion is not a problem. Developments in corrosion monitoring techniques, steam sampling and analytical methodologies for trace impurities, and computer modeling of the fluid chemistry has been instrumental in the success of this technology.« less

Photographic Images of Refugee Spatial Encounters: Pedagogy of Displacement

ERIC Educational Resources Information Center

Subedi, Binaya

2013-01-01

This paper examines my effort to document the experiences of a Bhutanese refugee community in a mid-western city of the United States. In particular, the essay looks at housing experiences the community encountered and my efforts to translate the events through photographs. The essay also explores how oppression operates in relation to refugee…

RNAV (GPS) total system error models for use in wake encounter risk analysis of dependent paired approaches to closely-spaced parallel runways : Project memorandum - February 2014

DOT National Transportation Integrated Search

2014-02-01

The purpose of this memorandum is to provide recommended Total System Error (TSE) models : for aircraft using RNAV (GPS) guidance when analyzing the wake encounter risk of proposed : simultaneous dependent (paired) approach operations to Closel...

Loads and motions of an F-106B flying through thunderstorms

NASA Technical Reports Server (NTRS)

Winebarger, R. M.

1986-01-01

Data are presented on loads and motions of a NASA F-106B airplane flying inside thunderstorms. No significant differences in piloting techniques were observed among the three pilots involved. It is indicated that airliners in normal operations occasionally encounter turbulence almost as severe as those encountered in these thunderstorm flights.

Fossil plant startup advisor: Volume 2, User's manual for a startup model: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dixon, R.R.; Kraje, N.B.

1988-12-01

These instructions describe how to use the dynamic model of a fossil power plant on the diskette at the back of this document. The model runs on an IBM PC, XT or AT. It was developed as part of an EPRI study on fossil startup problems; RP1184-4. The purpose of the model was to provide a tool to demonstrate problems encountered during startups and potential solutions proposed by various industry experts. Consequently, the accuracy and fidelity of the model was not critical, but rather the ability to operate in various startup configurations was more important. An MMS model of themore » cycling unit at COLLINS STATION of Commonwealth Edison served as the basis for the model. Some simplifications were introduced to allow it to run on the PC faster than realtime. The most significant of these is the steam property curves. The saturation properties used are reasonable over the entire operating range, but the superheated steam properties are highly inaccurate at low pressures and low temperatures. This limitation does not, however, diminish the value of the model in demonstrating startup problems or in evaluating the relative merits of one solution over another. On the positive side, the model has both a superheater bypass system and a turbine bypass system. Either bypass can be used separately, or they can be used together (something that appears desirable but no utility has been wealthy enough to try yet). In addition, it provides an excellent tool for understanding the operation of a drum type boiler and both superheater and turbine bypass systems. 14 figs.« less

Use of computer modeling to investigate a dynamic interaction problem in the Skylab TACS quad-valve package

NASA Technical Reports Server (NTRS)

Hesser, R. J.; Gershman, R.

1975-01-01

A valve opening-response problem encountered during development of a control valve for the Skylab thruster attitude control system (TACS) is described. The problem involved effects of dynamic interaction among valves in the quad-redundant valve package. Also described is a detailed computer simulation of the quad-valve package which was helpful in resolving the problem.

Decision-problem state analysis methodology

NASA Technical Reports Server (NTRS)

Dieterly, D. L.

1980-01-01

A methodology for analyzing a decision-problem state is presented. The methodology is based on the analysis of an incident in terms of the set of decision-problem conditions encountered. By decomposing the events that preceded an unwanted outcome, such as an accident, into the set of decision-problem conditions that were resolved, a more comprehensive understanding is possible. All human-error accidents are not caused by faulty decision-problem resolutions, but it appears to be one of the major areas of accidents cited in the literature. A three-phase methodology is presented which accommodates a wide spectrum of events. It allows for a systems content analysis of the available data to establish: (1) the resolutions made, (2) alternatives not considered, (3) resolutions missed, and (4) possible conditions not considered. The product is a map of the decision-problem conditions that were encountered as well as a projected, assumed set of conditions that should have been considered. The application of this methodology introduces a systematic approach to decomposing the events that transpired prior to the accident. The initial emphasis is on decision and problem resolution. The technique allows for a standardized method of accident into a scenario which may used for review or the development of a training simulation.

Optimal shutdown management

NASA Astrophysics Data System (ADS)

Bottasso, C. L.; Croce, A.; Riboldi, C. E. D.

2014-06-01

The paper presents a novel approach for the synthesis of the open-loop pitch profile during emergency shutdowns. The problem is of interest in the design of wind turbines, as such maneuvers often generate design driving loads on some of the machine components. The pitch profile synthesis is formulated as a constrained optimal control problem, solved numerically using a direct single shooting approach. A cost function expressing a compromise between load reduction and rotor overspeed is minimized with respect to the unknown blade pitch profile. Constraints may include a load reduction not-to-exceed the next dominating loads, a not-to-be-exceeded maximum rotor speed, and a maximum achievable blade pitch rate. Cost function and constraints are computed over a possibly large number of operating conditions, defined so as to cover as well as possible the operating situations encountered in the lifetime of the machine. All such conditions are simulated by using a high-fidelity aeroservoelastic model of the wind turbine, ensuring the accuracy of the evaluation of all relevant parameters. The paper demonstrates the capabilities of the novel proposed formulation, by optimizing the pitch profile of a multi-MW wind turbine. Results show that the procedure can reliably identify optimal pitch profiles that reduce design-driving loads, in a fully automated way.

Affinity adsorption of cells to surfaces and strategies for cell detachment.

PubMed

Hubble, John

2007-01-01

The use of bio-specific interactions for the separation and recovery of bio-molecules is now widely established and in many cases the technique has successfully crossed the divide between bench and process scale operation. Although the major specificity advantage of affinity-based separations also applies to systems intended for cell fractionation, developments in this area have been slower. Many of the problems encountered result from attempts to take techniques developed for molecular systems and, with only minor modification to the conditions used, apply them for the separation of cells. This approach tends to ignore or at least trivialise the problems, which arise from the heterogeneous nature of a cell suspension and the multivalent nature of the cell/surface interaction. To develop viable separation processes on a larger scale, effective contacting strategies are required in separators that also allow detachment or recovery protocols that overcome the enhanced binding strength generated by multivalent interactions. The effects of interaction valency on interaction strength needs to be assessed and approaches developed to allow effective detachment and recovery of adsorbed cells without compromising cell viability. This article considers the influence of operating conditions on cell attachment and the extent to which multivalent interactions determine the strength of cell binding and subsequent detachment.

Transanal surgery for obstructed defecation syndrome: Literature review and a single-center experience

PubMed Central

Liu, Wei-Cheng; Wan, Song-Lin; Yaseen, SM; Ren, Xiang-Hai; Tian, Cui-Ping; Ding, Zhao; Zheng, Ken-Yan; Wu, Yun-Hua; Jiang, Cong-Qing; Qian, Qun

2016-01-01

Obstructed defecation syndrome (ODS) is a functional disorder commonly encountered by colorectal surgeons and gastroenterologists, and greatly affects the quality of life of patients from both societal and psychological aspects. The underlying anatomical and pathophysiological changes of ODS are complex. However, intra-rectal intussusception and rectocele are frequently found in patients with ODS and both are thought to play an important role in the pathogenesis of ODS. With the development of evaluation methods in anorectal physiology laboratories and radiology studies, a great variety of new operative procedures, especially transanal procedures, have been invented to treat ODS. However, no procedure has been proved to be superior to others at present. Each operation has its own merits and defects. Thus, choosing appropriate transanal surgical procedures for the treatment of ODS remains a challenge for all surgeons. This review provides an introduction of the current problems and options for treatment of ODS and a detailed summary of the essential assessments needed for patient evaluation before carrying out transanal surgery. Besides, an overview of the benefits and problems of current transanal surgical procedures for treatment of ODS is summarized in this review. A report of clinical experience of some transanal surgical techniques used in the authors’ center is also presented. PMID:27672293

Transanal surgery for obstructed defecation syndrome: Literature review and a single-center experience.

PubMed

Liu, Wei-Cheng; Wan, Song-Lin; Yaseen, S M; Ren, Xiang-Hai; Tian, Cui-Ping; Ding, Zhao; Zheng, Ken-Yan; Wu, Yun-Hua; Jiang, Cong-Qing; Qian, Qun

2016-09-21

Obstructed defecation syndrome (ODS) is a functional disorder commonly encountered by colorectal surgeons and gastroenterologists, and greatly affects the quality of life of patients from both societal and psychological aspects. The underlying anatomical and pathophysiological changes of ODS are complex. However, intra-rectal intussusception and rectocele are frequently found in patients with ODS and both are thought to play an important role in the pathogenesis of ODS. With the development of evaluation methods in anorectal physiology laboratories and radiology studies, a great variety of new operative procedures, especially transanal procedures, have been invented to treat ODS. However, no procedure has been proved to be superior to others at present. Each operation has its own merits and defects. Thus, choosing appropriate transanal surgical procedures for the treatment of ODS remains a challenge for all surgeons. This review provides an introduction of the current problems and options for treatment of ODS and a detailed summary of the essential assessments needed for patient evaluation before carrying out transanal surgery. Besides, an overview of the benefits and problems of current transanal surgical procedures for treatment of ODS is summarized in this review. A report of clinical experience of some transanal surgical techniques used in the authors' center is also presented.

Burnout control at the Albright coal-waste-bank fire. Rept. of investigations/1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chaiken, R.F.; Bayles, L.G.

1991-01-01

Burnout Control is a process developed by the U.S. Bureau of Mines for accelerating the burning of wasted coal fires in situ, while at the same time controlling the heat and fumes produced. The Albright fire project is a first field trial of Burnout Control as applied to a coal waste bank. An exhaust ventilation system was designed and constructed and then operated over a 1-year period at the site of an existing abandoned mine land fire near the town of Albright, W.V. While predicted exhaust gas temperatures of 900 C and thermal power levels of 5 MW were achievedmore » at 20- to 30-in H2O vacuum levels, problems were encountered with engineering designs, equipment breakdown, and fuel-rich combustion that curtailed the time period of satisfactory operation. Effective afterburning of the exhaust gases (as they were drawn from the bank) corrected the problems associated with combustion stoichiometry and led to high thermal outputs. It is believed that with (1) improvements in engineering design and construction, (2) better control of the afterburning process, and (3) the use of conventional stack gas air-pollution controls, Burnout Control can be applied successfully to a coal waste bank fire.« less

Polio roundup. Grappling with the "problem" areas.

PubMed

1998-03-01

As the war against poliomyelitis continues, eradication efforts must now succeed in some countries which have been subjected to natural disasters and in others which are enduring manmade disasters. Subnational immunization days (SNIDs) were most recently conducted in northern Somalia in two 5-day rounds last November and December amid widespread popular and political support. While villages in the arid, drought-plagued country are often inaccessible, flooding from heavy rains was the only real problem encountered by the vaccination campaign. More than 90% of the estimated 375,000 children under age 5 years in the target area were vaccinated and given vitamin A. Careful advance preparations contributed to the campaign's success. A 7-day campaign in mid-February got oral polio vaccine to more than 330,000 children in southern Sudan. Maintaining the vaccine cold chain was the major operational challenge in this setting. To that end, all available means were used, including placing vaccines into running streams to keep them cool. The program in Sudan was coordinated by the UN's Operation Lifeline Sudan. Heat, armed conflict, lack of infrastructure, the need to reach more than 80% of the population by air, infectious diseases, drought, and hungry packs of hyenas were some of the obstacles to overcome. A second round of vaccination is planned for southern Sudan in mid March.

In Print or Out of Print? The Continuing Problem.

ERIC Educational Resources Information Center

Kayden, Mimi

1982-01-01

Briefly describes the problems encountered by libraries in attempting to purchase out-of-stock books and discusses some of the reasons for changes in the way publishers handle backlist materials, including sales volume and its relation to increased printing costs. (JL)

The Impaired Social Worker.

ERIC Educational Resources Information Center

Reamer, Frederic G.

1992-01-01

Discusses concept of the impaired professional; reviews research on various types of impairment (personality disorders, depression and other emotional problems, marital problems, and physical illness), prevalence and causes of impairment, and responses to it; and outlines model assessment and action plan for social workers who encounter an…

The Brown University Child and Adolescent Behavior Letter, 1999.

ERIC Educational Resources Information Center

Lipsitt, Lewis P., Ed.

1999-01-01

These 12 monthly issues from 1999 explore problems encountered by children and adolescents. Regular features include "Keep Your Eye On...," brief accounts of research into childhood and adolescent problems; "What's New in Research," summarizing research from recent publications and professional conferences;…

Practical Parenting: Successful Strategies for Solving Your Child's Behaviour Problems.

ERIC Educational Resources Information Center

Stenhouse, Glen

Recognizing that all parents encounter challenges in raising their children, this book presents practical strategies for solving common behavior problems. Chapter 1, "Bonding," concerns the development of parent-child attachment. Chapter 2, "Encouraging Development," discusses "hot-housing," language development, and…

Segregation of asphalt mixes caused by surge silos : final report.

DOT National Transportation Integrated Search

1982-01-01

Segregation of asphalt mixes continues to be a problem in Virginia, particularly with base mixes and coarse surface mixes. Although the problem is encountered primarily on jobs using surge silos, it has been related to other factors such as mix desig...

The Brown University Child and Adolescent Behavior Letter, 1998.

ERIC Educational Resources Information Center

Lipsitt, Lewis P., Ed.

1998-01-01

These 12 monthly issues from 1998 explore problems encountered by children and adolescents. Regular features include "Keep Your Eye On...," brief accounts of research into childhood and adolescent problems, "What's New in Research," summarizing research from recent publications and professional conferences;…

Autopsy-determined causes of death following organ transplantation in 25 patients aged 20 years or younger.

PubMed

Rose, Alan G

2003-01-01

This study aims to examine the autopsy-determined principal and proximate causes of death in 25 patients aged 20 years or younger who died during the 10-year period from 1990 to 1999 after receiving an organ transplant at the University of Minnesota/Fairview-University Medical Center. The autopsy records of this institution were examined for organ transplant recipients who were aged 20 years or younger at the time of their death. In each case, after review of the clinical and pathological data, the principle cause of death (PCOD), as well as the proximate cause of death (PXCOD) were noted. A total of 25 recipient patients were identified (five heart, five lung, five kidney and 10 liver transplants). Seven patients died 30 days or less post-operatively and 18 died thereafter. The following categories of PCOD were encountered: operative/technical complications 28%, most (6/7) being associated with liver transplantation. Infection (24%) and chronic rejection (12%) were other important PCOD. Respiratory complications accounted for 47% of the PCOD. The following categories of PXCOD were noted: technical problems 16%, pulmonary pathology 24%, miscellaneous 32%, acute rejection 4% and nil 20%. This study revealed that technical problems in liver transplants were an important PCOD; respiratory complications and chronic rejection were additional major causes of mortality in this young age group of transplant recipients. Pulmonary pathology and technical problems were the commonest specific groups contributing to the PXCOD.

Outcomes of antiretroviral therapy in a northern Indian urban clinic

PubMed Central

Dhooria, Sahajal; Prasad, KT; George, Ninoo; Ranjan, Sanjay; Gupta, Deepak; Sreenivas, Vishnubhatla; Kadhiravan, Tamilarasu; Miglani, Sunita; Sinha, Sanjeev; Wig, Naveet; Biswas, Ashutosh; Vajpayee, Madhu

2010-01-01

Abstract Problem Antiretroviral therapy (ART) programmes have been successful in several countries. However, whether they would succeed as part of a national programme in a resource-constrained setting such as India is not clear. The outcomes and specific problems encountered in such a setting have not been adequately studied. Approach We assessed the efficacy and functioning of India’s national ART programme in a tertiary care centre in northern India. All ART-naive patients started on ART between May 2005 and October 2006 were included in the study and were followed until 31 April 2008. Periodic clinical and laboratory evaluations were carried out in accordance with national guidelines. Changes in CD4+ lymphocyte count, body weight and body mass index were assessed at follow-up, and the operational problems analysed. Local setting The setting was a tertiary care centre in northern India with a mixed population of patients, mostly of low socioeconomic status. The centre is reasonably well resourced but faces constraints in health-care delivery, such as lack of adequate human resources and a high patient load. Relevant changes The response to ART in the cohort studied was comparable to that reported from other countries. However, the programme had a high attrition rate, possibly due to patient-related factors and operational constraints. Lessons learnt A high rate of attrition can affect the overall efficacy and functioning of an ART programme. Addressing the issues causing attrition might improve patient outcomes in India and in other resource-constrained countries. PMID:20428391

Obstacles Related to Structuring for Mathematization Encountered by Students When Solving Physics Problems

ERIC Educational Resources Information Center

Niss, Martin

2017-01-01

This paper studies the cognitive obstacles related to one aspect of mathematization in physics problem-solving, namely, what might be called "structuring for mathematization," where the problem situation is structured in such a way that a translation to a mathematical universe can be done. We report the results of an analysis of four…

Tree planting - strip-mined area in Maryland

Treesearch

Fred L. Bagley

1980-01-01

This report is written to elucidate some of the problems encountered in the planting of trees on strip-mined areas in Maryland. When problems are recognized, normally a solution (or at least, an improvement) can be instituted to alleviate the problem. The methods cited herein are those of experienced foresters engaged in strip-mine planting during the past seventeen...

Reflective Teaching via a Problem Exploration--Teaching Adaptations--Resolution Cycle: A Mixed Methods Study of Preservice Teachers' Reflective Notes

ERIC Educational Resources Information Center

Hayden, H. Emily; Chiu, Ming Ming

2015-01-01

We explore development of elementary preservice teachers' reflective practices as they solved problems encountered while teaching in a reading clinic. Written reflections (N = 175) were collected across 8 weeks from 23 preservice teachers and analyzed to investigate relationships among problem exploration, teaching adaptations, and problem…

Problem Solving in Technology Rich Contexts: Mathematics Sense Making in Out-of-School Environments

ERIC Educational Resources Information Center

Lowrie, Tom

2005-01-01

This investigation describes the way in which a case study participant (aged 7) represented, posed and solved problems in a technology game-based environment. The out-of-school problem-solving context placed numeracy demands on the participant that were more complex and sophisticated than the type of mathematics experiences he encountered in…

Modelling Difficulties and Their Overcoming Strategies in the Solution of a Modelling Problem

ERIC Educational Resources Information Center

Dede, Ayse Tekin

2016-01-01

The purpose of the study is to reveal the elementary mathematics student teachers' difficulties encountered in the solution of a modelling problem, the strategies to overcome those difficulties and whether the strategies worked or not. Nineteen student teachers solved the modelling problem in their four or five-person groups, and the video records…

Complex Problem Solving in Radiologic Technology: Understanding the Roles of Experience, Reflective Judgment, and Workplace Culture

ERIC Educational Resources Information Center

Yates, Jennifer L.

2011-01-01

The purpose of this research study was to explore the process of learning and development of problem solving skills in radiologic technologists. The researcher sought to understand the nature of difficult problems encountered in clinical practice, to identify specific learning practices leading to the development of professional expertise, and to…

Functional Behavioral Assessment for a Boy with Duchenne Muscular Dystrophy and Problem Behavior: A Case Study from Greece

ERIC Educational Resources Information Center

Theodoridou, Zoe; Koutsoklenis, Athanasios

2013-01-01

This article focuses on the application of functional behavioral assessment (FBA) to design a positive behavior intervention (PBI) for a boy with Duchenne muscular dystrophy (DMD) who encounters serious difficulties at the mainstream school because of behavioral problems and physical limitations. After the definition of problem behavior and its…

Science Curriculum from the Perspectives of Turkish Teachers: Problems Encountered and Suggestions for Solutions

ERIC Educational Resources Information Center

Bekmezci, Sinan Muhammet; Ates, Özlem

2017-01-01

The purpose of this research is to identify the problems that teachers have experienced during the implementation of the science curriculum and their suggestions for solution to these problems. In the research, survey model has been used among the descriptive research methods in which quantitative and qualitative data have been used together. The…

An Analysis of Problems in College Students' Participation in the Western China Program

ERIC Educational Resources Information Center

Yumei, Yi

2008-01-01

Since its initiation in 2003, the College Student Western China Program has had several satisfying achievements. At the same time, however, problems exist in the project. This article gives a brief analysis of problems encountered in the project from the aspects of publicity and campaign work, plans and schedules, student participation, voluntary…

Young Filipino Students Making Sense of Arithmetic Word Problems in English

ERIC Educational Resources Information Center

Bautista, Debbie; Mulligan, Joanne; Mitchelmore, Michael

2009-01-01

Young Filipino children are expected to solve mathematical word problems in English, a task which they typically encounter only in schools. In this exploratory study, task-based interviews were conducted with seven Filipino children from a public school. The children were asked to read and solve addition and subtraction word problems in English or…

Reminder Cards Improve Physician Documentation of Obesity But Not Obesity Counseling.

PubMed

Shungu, Nicholas; Miller, Marshal N; Mills, Geoffrey; Patel, Neesha; de la Paz, Amanda; Rose, Victoria; Kropa, Jill; Edi, Rina; Levy, Emily; Crenshaw, Margaret; Hwang, Chris

2015-01-01

Physicians frequently fail to document obesity and obesity-related counseling. We sought to determine whether attaching a physical reminder card to patient encounter forms would increase electronic medical record (EMR) assessment of and documentation of obesity and dietary counseling. Reminder cards for obesity documentation were attached to encounter forms for patient encounters over a 2-week intervention period. For visits in the intervention period, the EMR was retrospectively reviewed for BMI, assessment of "obesity" or "morbid obesity" as an active problem, free-text dietary counseling within physician notes, and assessment of "dietary counseling" as an active problem. These data were compared to those collected through a retrospective chart review during a 2-week pre-intervention period. We also compared physician self-report of documentation via reminder cards with EMR documentation. We found significant improvement in the primary endpoint of assessment of "obesity" or "morbid obesity" as an active problem (42.5% versus 28%) compared to the pre-intervention period. There was no significant difference in the primary endpoints of free-text dietary counseling or assessment of "dietary counseling" as an active problem between the groups. Physician self-reporting of assessment of "obesity" or "morbid obesity" as an active problem (77.7% versus 42.5%), free-text dietary counseling on obesity (69.1% versus 35.4%) and assessment of "dietary counseling" as an active problem (54.3% versus 25.2%) were all significantly higher than those reflected in EMR documentation. This study demonstrates that physical reminder cards are a successful means of increasing obesity documentation rates among providers but do not necessarily increase rates of obesity-related counseling or documentation of counseling. Our study suggests that even with such interventions, physicians are likely under-documenting obesity and counseling compared to self-reported rates.

Less Drinking, Yet More Problems: Understanding African American Drinking and Related Problems

PubMed Central

Zapolski, Tamika C. B.; Pedersen, Sarah L.; McCarthy, Denis M.; Smith, Gregory T.

2013-01-01

Researchers have found that, compared to European Americans, African Americans report later initiation of drinking, lower rates of use, and lower levels of use across almost all age groups. Nevertheless, African Americans also have higher levels of alcohol problems than European Americans. After reviewing current data regarding these trends, we provide a theory to understand this apparent paradox as well as to understand variability in risk among African Americans. Certain factors appear to operate as both protective factors against heavy use and risk factors for negative consequences from use. For example, African American culture is characterized by norms against heavy alcohol use or intoxication, which protects against heavy use but which also provides within group social disapproval when use does occur. African Americans are more likely to encounter legal problems from drinking than European Americans, even at the same levels of consumption, perhaps thus resulting in reduced consumption but more problems from consumption. There appears to be one particular group of African Americans, low-income African American men, who are at the highest risk for alcoholism and related problems. We theorize that this effect is due to the complex interaction of residential discrimination, racism, age of drinking, and lack of available standard life reinforcers (e.g., stable employment and financial stability). Further empirical research will be needed to test our theories and otherwise move this important field forward. A focus on within group variation in drinking patterns and problems is necessary. We suggest several new avenues of inquiry. PMID:23477449

Improved segmentation of occluded and adjoining vehicles in traffic surveillance videos

NASA Astrophysics Data System (ADS)

Juneja, Medha; Grover, Priyanka

2013-12-01

Occlusion in image processing refers to concealment of any part of the object or the whole object from view of an observer. Real time videos captured by static cameras on roads often encounter overlapping and hence, occlusion of vehicles. Occlusion in traffic surveillance videos usually occurs when an object which is being tracked is hidden by another object. This makes it difficult for the object detection algorithms to distinguish all the vehicles efficiently. Also morphological operations tend to join the close proximity vehicles resulting in formation of a single bounding box around more than one vehicle. Such problems lead to errors in further video processing, like counting of vehicles in a video. The proposed system brings forward efficient moving object detection and tracking approach to reduce such errors. The paper uses successive frame subtraction technique for detection of moving objects. Further, this paper implements the watershed algorithm to segment the overlapped and adjoining vehicles. The segmentation results have been improved by the use of noise and morphological operations.

Water Quality Monitor

NASA Technical Reports Server (NTRS)

1982-01-01

An automated water quality monitoring system was developed by Langley Research Center to meet a need of the Environmental Protection Agency (EPA). Designed for unattended operation in water depths up to 100 feet, the system consists of a subsurface buoy anchored in the water, a surface control unit (SCU) and a hydrophone link for acoustic communication between buoy and SCU. Primary functional unit is the subsurface buoy. It incorporates 16 cells for water sampling, plus sensors for eight water quality measurements. Buoy contains all the electronic equipment needed for collecting and storing sensor data, including a microcomputer and a memory unit. Power for the electronics is supplied by a rechargeable nickel cadmium battery that is designed to operate for about two weeks. Through hydrophone link the subsurface buoy reports its data to the SCU, which relays it to land stations. Link allows two-way communications. If system encounters a problem, it automatically shuts down and sends alert signal. Sequence of commands sent via hydrophone link causes buoy to release from anchor and float to the surface for recovery.

Energy-based operator splitting approach for the time discretization of coupled systems of partial and ordinary differential equations for fluid flows: The Stokes case

NASA Astrophysics Data System (ADS)

Carichino, Lucia; Guidoboni, Giovanna; Szopos, Marcela

2018-07-01

The goal of this work is to develop a novel splitting approach for the numerical solution of multiscale problems involving the coupling between Stokes equations and ODE systems, as often encountered in blood flow modeling applications. The proposed algorithm is based on a semi-discretization in time based on operator splitting, whose design is guided by the rationale of ensuring that the physical energy balance is maintained at the discrete level. As a result, unconditional stability with respect to the time step choice is ensured by the implicit treatment of interface conditions within the Stokes substeps, whereas the coupling between Stokes and ODE substeps is enforced via appropriate initial conditions for each substep. Notably, unconditional stability is attained without the need of subiterating between Stokes and ODE substeps. Stability and convergence properties of the proposed algorithm are tested on three specific examples for which analytical solutions are derived.

Major oil spill response coordination in the combat of spills in Bahrain waters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, D.J.S.; James, J.D.

1985-01-01

On Aug. 25, 1980, without warning, a large oil slick invaded the north and west coasts of Bahrain. This serious incident was designated a national emergency, and a special high-level government committee was established immediately to handle the response procedure. This paper describes how the committee functioned with the private sector and the problems encountered and overcome. The lessons learned have stimulated interest in the proposed use of computers to aid combat operations as both a technical tool and an information service. In addition, this experience can guide those responsible for controlling response operations for future major oil spills inmore » coastal areas. With proper planning, a highly satisfactory cooperative organization can be established between goverment and the private sector to respond effectively, economically, and with minimum environmental damage to a major oil spill affecting coastal waters and shorelines. Part of this planning is to collate and record the major available response equipment and material packages, thereby increasing the necessary state of readiness.« less

GOS hook type wells, directional planning, techniques applied and problems encountered

DOE Office of Scientific and Technical Information (OSTI.GOV)

A /Azim, M.; Fahmy, H.; Salem, A.

1995-10-01

This paper addresses the various aspects of hook type wells introduced and drilled within GUPCO operations during he last two years. The first well of this category was October-G10, drilled in October 1992 from October ``G`` platform to a target point in the Nubia formation. Several wells of the same type have been drilled through 1993 and 1994. This group includes October-H1, Ramadan 3-57, July 62-69 and SB 374-3. Drilling hook type well profiles has resulted in increased production and more reserve recovery. The driving force behind using this profile was the reservoir requirements where it was required to hitmore » a target within few meters at a certain angle and direction. Torque and drag models have been used to optimize well path planning, resulting in lower torque and drag values. Daily pot appraisal of the drilling operations to monitor hole cleaning effectiveness. Combination of advanced steerable systems and PDC bits enabled GUPCO to drill these wells cost effectively.« less

Using video to introduce clinical materials.

PubMed

Kommalage, Mahinda; Senadheera, Chandanie

2012-08-01

The early introduction of clinical material is a recognised strategy in medical education. The University of Ruhana Medical School, where a traditional curriculum is followed, offers students pre-clinical subjects without clinical exposure during their first and second years. Clinical materials in the form of videos were introduced to first-year students. In the videos, patients and their relatives described the diseases and related problems. Students were instructed to identify the problems encountered by patients and relatives. Each video was followed by a discussion of the problems identified by the students. The medical, social and economic problems encountered by patients and relatives were emphasised during post-video discussions. A lecture was conducted linking the contents of the videos to subsequent lectures. The aim of this study is to investigate whether combining teaching preclinical material with a video presentation of relevant clinical cases facilitates the interest and understanding of students. Quantitative data were collected using a questionnaire, whereas qualitative data were collected using focus group discussions. Quantitative data showed that students appreciated the video, had 'better' knowledge acquisition and a 'better' understanding of problems encountered by patients. Qualitative analysis highlighted the following themes: increased interest; enhanced understanding; relevance of basic knowledge to clinical practice; orientation to profession; and personalising theories. The introduction of patients in the form of videos helped students to understand the relevance of subject material for clinical practice, increased their interest and facilitated a better understanding of the subject material. Therefore, it seems video is a feasible medium to introduce clinical materials to first-year students who follow a traditional curriculum in a resource-limited environment. © Blackwell Publishing Ltd 2012.

Some Problems in Studying the English Elements in the Main European Languages

ERIC Educational Resources Information Center

Filipovic, Rudolf

1972-01-01

A study is being done, to be reported on subsequently, on the infiltrations of English into the languages of Europe. Objectives of the project, some problems encountered, and planned results and products are discussed. See FL 508 197 for availability. (RM)

Academic Value of Internships in Agronomy: A Survey.

ERIC Educational Resources Information Center

Herring, Matthew D.; And Others

1990-01-01

A survey of the academic requirements of internships, benefits in taking part in an internship, and problems encountered in internship programs are described. Results indicated that one of the problems with internship programs occurred when faculty did not have direct control over the experience. (CW)

The Powers That Be: AAVE as the Composition Curriculum.

ERIC Educational Resources Information Center

Richardson, Elaine

This Powerpoint presentation argues that the problems encountered in implementing African-centered curriculum into the university composition classroom attest to the need for African centered education in kindergarten through university level educational institutions. The solution of the problem of African American students' disproportionate…

Automated Scheduling of Science Activities for Titan Encounters by Cassini

NASA Technical Reports Server (NTRS)

Ray, Trina L.; Knight, Russel L.; Mohr, Dave

2014-01-01

In an effort to demonstrate the efficacy of automated planning and scheduling techniques for large missions, we have adapted ASPEN (Activity Scheduling and Planning Environment) [1] and CLASP (Compressed Large-scale Activity Scheduling and Planning) [2] to the domain of scheduling high-level science goals into conflict-free operations plans for Titan encounters by the Cassini spacecraft.

Viking Mars encounter

NASA Technical Reports Server (NTRS)

1976-01-01

Various phases of planetary operations related to the Viking mission to Mars are described. Topics discussed include: approach phase, Mars orbit insertion, prelanding orbital activities, separation, descent and landing, surface operations, surface sampling and operations starting, orbiter science and radio science, Viking 2, Deep Space Network and data handling.

What Makes a Social Encounter Meaningful: The Impact of Social Encounters of Homeschooled Children on Emotional and Behavioral Problems

ERIC Educational Resources Information Center

Guterman, Oz; Neuman, Ari

2017-01-01

In modern society, a large part of the socialization process occurs in schools. Therefore, one of the most significant questions raised with regard to homeschooling concerns the impact of this type of education on the emotional world of the child. However, there is almost no mention in the research of how the nature of the social activity of…

Field operating experience in locating and re-recovering landslide-damaged oil wells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, R.J.

1974-01-01

Landslides have damaged 65 oil wells on Getty Oil Co.'s leases in the Ventura Avenue field. During a landslide, some wells may remain connected to the surface while other wells may be buried. Well damage ranges from slight bending to complete severing of all casing strings, and depth of damage varies from 15 to 120 ft. Two major problems have been encountered when repair work is planned for a landslide damaged well. The first problem is to locate the undamaged well casing below the landslide. The second problem is to recover the well and replace the damaged casing. Some methodsmore » used by Getty Oil Co. to locate the undamaged portion of a well are conventional surveys, dipneedle surveys, magnetometer surveys, kink-meter surveys, and test holes. Three methods have been used to recover landslide damaged wells in the Ventura Avenue field. The simplest method is an open excavation made with standard earthmoving equipment. This method is limited to shallow depths and locations where the landslide would not be reactivated. To reach greater depths, special methods such as hand-dug or machine-dug shafts must be used. All 3 methods have been used successfully by Getty Oil Co.« less

Structural Analysis of the Support System for a Large Compressor Driven by a Synchronous Electric Motor

NASA Technical Reports Server (NTRS)

Winter, J. R.

1984-01-01

For economic reasons, the steam drive for a large compressor was replaced by a large synchronous electric motor. Due to the resulting large increase in mass and because the unit was mounted on a steel frame approximately 18 feet above ground level, it was deemed necessary to determine if a steady state or transient vibration problem existed. There was a definite possibility that a resonant or near resonant condition could be encountered. The ensuing analysis, which led to some structural changes as the analysis proceeded, did not reveal any major steady state vibration problems. However, the analysis did indicate that the system would go through several natural frequencies of the support structure during start-up and shutdown. This led to the development of special start-up and shutdown procedures to minimize the possibility of exciting any of the major structural modes. A coast-down could result in significant support structure and/or equipment damage, especially under certain circumstances. In any event, dynamic field tests verified the major analytical results. The unit has now been operating for over three years without any major vibration problems.

Lifetime of binary asteroids versus gravitational encounters and collisions

NASA Technical Reports Server (NTRS)

Chauvineau, Bertrand; Farinella, Paolo; Mignard, F.

1992-01-01

We investigate the effect on the dynamics of a binary asteroid in the case of a near encounter with a third body. The dynamics of the binary is modeled as a two-body problem perturbed by an approaching body in the following ways: near encounters and collisions with a component of the system. In each case, the typical value of the two-body energy variation is estimated, and a random walk for the cumulative effect is assumed. Results are applied to some binary asteroid candidates. The main conclusion is that the collisional disruption is the dominant effect, giving lifetimes comparable to or larger than the age of the solar system.

Social Problems in Turkish Social Studies Coursebooks and Workbooks

ERIC Educational Resources Information Center

Yesiltas, Erkan; Eryilmaz, Önder; Pehlivan, Aysegül

2016-01-01

In Turkey, the social studies course, which is taught in elementary 5th to 7th grades, prepares students to solve problems they may encounter in their future life. Therefore, the teaching of social problems to help students get to know them is one of the most important issues for the social studies course. The primary aim of this study is to…

"Students Get Bogged Down": How Religious Israeli Elementary Teachers View Problems and Solutions in Bible Teaching

ERIC Educational Resources Information Center

Walfish, Ruth A.; Brody, David L.

2018-01-01

Bible teachers in contemporary society confront serious problems related to the nature of the biblical text and the socio-cultural context of their teaching. This study, based on semi-structured interviews, examines the problems that five expert religious Israeli elementary school teachers encounter in their teaching and the solutions they employ.…

The Real World of the Beginning Teacher.

ERIC Educational Resources Information Center

National Education Association, Washington, DC. National Commission on Teacher Education and Professional Standards.

Problems and goals of beginning teachers are the subject of these speeches presented by both experienced and beginning teachers at the 1965 national conference of the National Commission on Teacher Education and Professional Standards. The problems include the differences between teacher expectations and encounters, unrealistic teaching and…

Virtual Bridge Design

ERIC Educational Resources Information Center

Bisogno, Janet; JeanPierre, Bobby

2008-01-01

The West Point Bridge Design (WPBD) building project engages students in project-based learning by giving them a real-life problem to solve. By using technology, students are able to become involved in solving problems that they normally would not encounter. Involvement with interactive websites, such as WPBD, assists students in using…

Objective Sleep in Pediatric Anxiety Disorders and Major Depressive Disorder

ERIC Educational Resources Information Center

Forbes, Erika E.; Bertocci, Michele A.; Gregory, Alice M.; Ryan, Neal D.; Axelson, David A.; Birmaher, Boris; Dahl, Ronald E.

2008-01-01

A study to examine sleep problems encountered in anxiety and depressive disorders among children and adolescents is conducted. Results indicated subjective and objective sleep problems in children and adolescents with anxiety disorders and need to be kept in mind when treating young anxious people.

Bereavement Support for Children

ERIC Educational Resources Information Center

Auman, Mary Jo

2007-01-01

The death of a parent is one of the most significant and stressful events children can encounter. Surviving children may experience psychiatric problems and social dysfunction during their childhood and possibly throughout their adult lives. Children surviving a sibling's death may develop behavioral problems, because no one can fill the emptiness…

The Brown University Child and Adolescent Behavior Letter, 1997.

ERIC Educational Resources Information Center

Lipsitt, Lewis P., Ed.

1997-01-01

These 12 monthly issues, one special report, and index from 1997 explore problems encountered by children and adolescents. Regular features include "Keep Your Eye On...," brief accounts of research into childhood and adolescent problems; "What's New in Research," summarizing research from recent publications and professional…

Problemes linguistiques des enfants de travailleurs migrants (Linguistic Problems of the Children of Migrant Workers).

ERIC Educational Resources Information Center

de Greve, Marcel, Ed.; Rosseel, Eddy, Ed.

Papers on language difficulties encountered by migrant workers' children include: "Anomie in Bicultural Education" (Hugo Baetens Beardsmore); "An Investigation into Bilingual Education for Children from Favoured Socio-Economic Backgrounds" (Hugo Baetens Beardsmore); "Orientations of Foreign Children Relating to Placement…

Bronchobiliary fistula: principles of management.

PubMed

Chua, H K; Allen, M S; Deschamps, C; Miller, D L; Pairolero, P C

2000-10-01

Bronchobiliary fistula is an uncommon entity. Recently, we encountered 2 patients with this problem. Both were treated successfully with resection of the involved pulmonary tissue and interposition of viable tissue between the lung and the fistulous tract. This approach, although invasive, provided a rapid resolution of the patients' problem.

30 CFR 250.444 - What are the choke manifold requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations... abrasiveness of drilling fluids and well fluids that you may encounter. (b) Choke manifold components must have...

Characterizing SI Engine Transient Fuel Consumption in ALPHA

EPA Science Inventory

Examine typical transient engine operation encountered over the EPA's vehicle and engine testing drive cycles to characterize that transient fuel usage, and then describe the changes made to ALPHA to better model transient engine operation.

Vibration characteristics of the HPOTP (High-Pressure Oxygen Turbopump) of the SSME (Space Shuttle Main Engine)

NASA Technical Reports Server (NTRS)

Childs, D. W.; Moyer, D. S.

1984-01-01

Attention is given to rotor dynamic problems that have been encountered and eliminated in the course of Space Shuttle Main Engine (SSME) development, as well as continuing, subsynchronous problems which are being encountered in the development of a 109-percent power level engine. The basic model for the SSME's High Pressure Oxygen Turbopump (HPOTP) encompasses a structural dynamic model for the rotor and housing, and component models for the liquid and gas seals, turbine clearance excitation forces, and impeller diffuser forces. Linear model results are used to examine the synchronous response and stability characteristics of the HPOTP, with attention to bearing load and stability problems associated with the second critical speed. Differences between linear and nonlinear model results are discussed and explained in terms of simple models. Simulation results indicate that while synchronous bearing loads can be reduced, subsynchronous motion is not eliminated by seal modifications.

Trapped particle absorption by the Ring of Jupiter

NASA Technical Reports Server (NTRS)

Fillius, W.

1983-01-01

The interaction of trapped radiation with the ring of Jupiter is investigated. Because it is an identical problem, the rings of Saturn and Uranus are also examined. Data from the Pioneer II encounter, deductions for some of the properties of the rings of Jupiter and Saturn. Over a dozen Jupiter magnetic field models are available in a program that integrates the adiabatic invariants to compute B and L. This program is to label our UCSD Pioneer II encounter data with the most satisfactory of these models. The expected effects of absorbing material on the trapped radiation are studied to obtain the loss rate as a function of ring properties. Analysis of the particle diffusion problem rounds out the theoretical end of the ring absorption problem. Other projects include identification of decay products for energetic particle albedo off the rings and moons of Saturn and a search for flux transfer events at the Jovian magnetopause.

Mechanical Clogging Processes in Unconsolidated Porous Media Near Pumping Wells

NASA Astrophysics Data System (ADS)

de Zwart, B.; Schotting, R.; Hassanizadeh, M.

2003-12-01

In the Netherlands water supply companies produce over more than one billion cubic meters of drinking water every year. About 2500 water wells are used to pump up the groundwater from aquifers in the Dutch subsurface. More than 50% of these wells will encounter a number of technical problems during their lifetime. The main problem is the decrease in capacity due to well clogging. Clogging shows up after a number of operation years and results in extra, expensive cleaning operations and in early replacement of the pumping wells. This problem has been acknowledged by other industries, for example the metal, petroleum, beer industry and underground storage projects. Well clogging is the result of a number of interacting mechanisms creating a complex problem in the subsurface. In most clogging cases mechanical mechanisms are involved. A large number of studies have been performed to comprehend these processes. Investigations on mechanical processes are focused on transport of small particles through pores and deposition of particles due to physical or physical-chemical processes. After a period of deposition the particles plug the pores and decrease the permeability of the medium. Particle deposition in porous media is usually modelled using filtration theory. In order to get the dynamics of clogging this theory is not sufficient. The porous media is continuously altered due to deposition and mobilization. Therefore the capture characteristics will also continuously change and deposition rates will change in time. A new formula is derived to describe (re)mobilization of particles and allow changing deposition rates. This approach incorporates detachment and reattachment of deposited particles. This work also includes derivation of the filtration theory in radial coordinates. A comparison between the radial filtration theory and the new formula will be shown.

Flyby Error Analysis Based on Contour Plots for the Cassini Tour

NASA Technical Reports Server (NTRS)

Stumpf, P. W.; Gist, E. M.; Goodson, T. D.; Hahn, Y.; Wagner, S. V.; Williams, P. N.

2008-01-01

The maneuver cancellation analysis consists of cost contour plots employed by the Cassini maneuver team. The plots are two-dimensional linear representations of a larger six-dimensional solution to a multi-maneuver, multi-encounter mission at Saturn. By using contours plotted with the dot product of vectors B and R and the dot product of vectors B and T components, it is possible to view the effects delta V on for various encounter positions in the B-plane. The plot is used in operations to help determine if the Approach Maneuver (ensuing encounter minus three days) and/or the Cleanup Maneuver (ensuing encounter plus three days) can be cancelled and also is a linear check of an integrated solution.

Between normality and deviance: the breakdown of batterers' identity following police intervention.

PubMed

Buchbinder, Eli; Eisikovits, Zvi

2004-04-01

With the transformation of intimate violence from private trouble to social problem, police intervention in domestic violence cases became more prevalent. Research has focused mainly on battered women's perception of police intervention, their evaluations, and their level of satisfaction with the intervention. However, there is little research examining the perpetrators' subjective perceptions of such interventions. The purpose of this study is to describe and analyze battering men's perceptions of police intervention. The study is based on semistructured, in-depth interviews with 20 batterers who had repeated encounters with police. Findings show a continuum of self-management, ranging from attempts to preserve a normative identity in the first encounter to struggling against criminalization in the second encounter and adopting a victim identity in the third encounter. The findings are discussed in the context of gender identity and power relations.

Vision requirements for Space Station applications

NASA Technical Reports Server (NTRS)

Crouse, K. R.

1985-01-01

Problems which will be encountered by computer vision systems in Space Station operations are discussed, along with solutions be examined at Johnson Space Station. Lighting cannot be controlled in space, nor can the random presence of reflective surfaces. Task-oriented capabilities are to include docking to moving objects, identification of unexpected objects during autonomous flights to different orbits, and diagnoses of damage and repair requirements for autonomous Space Station inspection robots. The approaches being examined to provide these and other capabilities are television IR sensors, advanced pattern recognition programs feeding on data from laser probes, laser radar for robot eyesight and arrays of SMART sensors for automated location and tracking of target objects. Attention is also being given to liquid crystal light valves for optical processing of images for comparisons with on-board electronic libraries of images.

Some lessons from NACA/NASA aerodynamic studies following World War II

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1983-01-01

An historical account is presented of the new departures in aerodynamic research conducted by NACA, and subsequently NASA, as a result of novel aircraft technologies and operational regimes encountered in the course of the Second World War. The invention and initial development of the turbojet engine furnished the basis for a new speed/altitude regime in which numerous aerodynamic design problems arose. These included compressibility effects near the speed of sound, with attendant lift/drag efficiency reductions and longitudinal stability enhancements that were accompanied by a directional stability reduction. Major research initiatives were mounted in the investigation of swept, delta, trapezoidal and variable sweep wing configurations, sometimes conducted through flight testing of the 'X-series' aircraft. Attention is also given to the development of the first generation of supersonic fighter aircraft.

The MVM imaging system and its spacecraft interactions. [Mariner Venus/Mercury TV system performance

NASA Technical Reports Server (NTRS)

Vescelus, F. E.

1975-01-01

The present work describes the main considerations and steps taken in determining the functional design of the imaging system of the Mariner Venus/Mercury (MVM) spacecraft and gives examples of some of the interactions between the spacecraft and the imaging instrument during the design and testing phases. Stringent cost and scheduling constraints dictated the use of the previous Mariner 9 dual-camera TV system. The TV parameters laid the groundwork for the imaging definition. Based on the flyby distances from Venus and Mercury and the goal of surface resolution better than 500 meters per sample pair, calculation was performed on focal length, format size, planetary coverage, and data rates. Some problems encountered in initial mechanical operation and as a result of spacecraft drift during the mission are also discussed.

Ergonomics in industrially developing countries: a literature review.

PubMed

Huck-Soo, Loo; Richardson, Stanley

2012-12-01

The two final decades of the 20th century saw a significant increase in ergonomics activity (and resulting publications) in industrially developing countries (IDCs). However, a few ergonomics papers from Singapore, for example, were published in 1969 and 1970. This paper reviews developments in ergonomics in industrially developing countries from 1969 relying heavily on published papers although their quality varies considerably. Some criticism of these papers is offered. Most were concerned with the use of work tools, workstation operations, material handling and working environments especially in tropical climates. The similar problems encountered in a variety of countries are discussed, and the importance of low-cost solutions stressed. This study presents an overview of er gonomics research in IDCs. It concentrates on ASEAN countries whilst recognising the valuable work done in other areas.

Mounting arrangement for the drive system of an air-bearing spindle on a machine tool

DOEpatents

Lunsford, J.S.; Crisp, D.W.; Petrowski, P.L.

1987-12-07

The present invention is directed to a mounting arrangement for the drive system of an air-bearing spindle utilized on a machine tool such as a lathe. The mounting arrangement of the present invention comprises a housing which is secured to the casing of the air bearing in such a manner that the housing position can be selectively adjusted to provide alignment of the air-bearing drive shaft supported by the housing and the air-bearing spindle. Once this alignment is achieved the air between spindle and the drive arrangement is maintained in permanent alignment so as to overcome misalignment problems encountered in the operation of the machine tool between the air-bearing spindle and the shaft utilized for driving the air-bearing spindle.

Exploring Education. Students from Overseas.

ERIC Educational Resources Information Center

Yates, Alfred, Ed.

Students entering college for the first time are often confronted with adjustment problems that seem to them unsurmountable and impossible. There is the transition from living dependently with parents to semi-independent living on the college campus, in addition to the many problems encountered in academic areas. If a student, accustomed to the…

New Territory: Problems of Adjusting to the First Year of a Social Science PhD.

ERIC Educational Resources Information Center

Hockey, John

1994-01-01

Problems encountered by first-year social science doctoral students in adjusting to their new status as novice researchers are examined, including intellectual solitariness, professional and social isolation, new work organization requirements, anxiety concerning time and productivity, intellectual life, and supervision. Factors contributing to…

Theory Oriented Research: Problems and Challenges.

ERIC Educational Resources Information Center

Greer, John T.

This paper discusses problems the author encountered in attempting to conduct a study of teacher motivation as influenced by a combination of participative decision-making and financial rewards. Over a 3-year period, teacher motivation was to be viewed as influenced by two independent variables--participative decision-making and financial rewards;…

Examples of Cross-Cultural Problems Encountered by Americans Working Overseas; An Instructor's Handbook.

ERIC Educational Resources Information Center

Foster, Robert J.

Intended mainly as a source book for instructors in area training programs, this handbook contains summary accounts of events illustrating problems frequently met by Americans working overseas, especially those providing technical assistance in developing nations. Examples are drawn from case studies, interviews, anthropology texts, and other…

Identifying Fallacies of Reference in Argumentation

ERIC Educational Resources Information Center

Gough, Jim

2009-01-01

The experience of teaching informal logic (sometimes called practical logic) at the introductory level over the last fifteen years has allowed the author the opportunity to identify some interesting problems. These problems have been encountered by students attempting to understand some of the ideas presented in the informal logic course and by…

Efficacy of a Latino Mother-Child Communication Intervention in Elementary Schools

ERIC Educational Resources Information Center

McNaughton, Diane B.; Cowell, Julia Muennich; Fogg, Louis

2015-01-01

Children of Latino immigrants in the United States encounter ecological stressors that heighten their risk for depressive symptoms, externalizing behavior, and problems in school. Studies have shown that affirming parent-child communication is protective of child depressive symptoms and accompanying problems. The purpose of this study was to…

Understanding Critical Thinking to Create Better Doctors

ERIC Educational Resources Information Center

Zayapragassarazan, Zayabalaradjane; Menon, Vikas; Kar, Sitanshu Sekhar; Batmanabane, Gitanjali

2016-01-01

Medical students master an enormous body of knowledge, but lack systematic problem solving ability and effective clinical decision making. High profile reports have called for reforms in medical education to create a better generation of doctors who can cope with the system based problems they would encounter in an interdisciplinary and…

Anatomy of a bearing torque problem

NASA Technical Reports Server (NTRS)

Phinney, Damon D.

1987-01-01

In the early 1970s, an antenna despin drive was developed for MBB solar science satellite HELIOS. A problem with high bearing drag torque that was encountered on the two flight models of this drive, after successful tests were completed on twelve bearings, an engineering model, and the qualification unit is discussed.

SOME PROBLEMS IN THE CONSTRUCTION OF AN ELECTRON LINEAR ACCELERATOR (in Dutch)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Verhaeghe, J.; Vanhuyse, V.; Van Leuven, P.

1959-01-01

Special problems encountered in the construction of the electron linear accelerator of the Natuurkundig Laboratorium der Rijksuniversiteit of Ghent are discussed. The subjects considered are magnetic focusing, magnetic screening of the electron gun cathode, abnormal attenuation-multipactor effects, and electron energy control. (J.S.R.)

Difficulties for University Students with Mental Health Problems: A Critical Interpretive Synthesis

ERIC Educational Resources Information Center

Markoulakis, Roula; Kirsh, Bonnie

2013-01-01

Postsecondary institutions are witnessing an increase in the number and severity of student mental health problems, necessitating an understanding of the difficulties these students encounter in striving for higher education. The authors conducted a critical interpretive synthesis of 10 articles pertaining to difficulties experienced by students…

English Preservice Teaching: Problems and Suggested Solutions

ERIC Educational Resources Information Center

Naeem, Marwa Ahmed Refat

2014-01-01

The present study investigated the problems faced by Egyptian EFL prospective teachers during their first encounter with preservice teaching. The sample for the study included 135 prospective EFL teachers trained in five preparatory (middle) schools in Kafr El-Sheikh city, Egypt. At the end of their first year training course, the prospective…

Education's Role in National Development Plans: Ten Country Cases.

ERIC Educational Resources Information Center

Thomas, R. Murray, Ed.

The place education has been assigned in the national development programs of 10 nations is discussed, the problems that these countries have encountered in managing education are examined, and the measures adopted to solve educational problems are assessed. Included are the following papers: (1) "The Nature of National Development…

Human Gene Discovery Laboratory: A Problem-Based Learning Experience

ERIC Educational Resources Information Center

Bonds, Wesley D., Sr.; Paolella, Mary Jane

2006-01-01

A single-semester elective combines Mendelian and molecular genetics in a problem-solving format. Students encounter a genetic disease scenario, construct a family pedigree, and try to confirm their medical diagnoses through laboratory experiences. Encouraged to generate ideas as they test their hypotheses, students realize the importance of data…

Turkish EFL Pre-Service Teachers' Pronunciation Problems

ERIC Educational Resources Information Center

Bardakçi, Mehmet

2015-01-01

This classroom research deals with pronunciation problems that Turkish EFL teacher candidates would encounter. The participants were 22 EFL pre-service teachers with B2 level of proficiency in English. The presentations which were carried out by these participants were analyzed both by the participants themselves and the researcher. The results…

Knowledge Inertia and Organizational Learning as the Explanation of Organizational Performance

ERIC Educational Resources Information Center

Aküzüm, Cemal

2014-01-01

Knowledge is an important concept for individuals and organizations both as a power and source. Thus, knowledge management has become important subject for researchers. However, when people encounter problems, they usually try to produce solutions by utilizing their previous knowledge and experience. Such problem solving strategies are called…

Establishing a Child Care Substitute Caregiver System.

ERIC Educational Resources Information Center

Love, Lynne

Substitute caregivers are needed by day care centers in every state. Indeed, some areas are experiencing severe shortages of applicants for child care positions and short-term substitute work. This article describes problems encountered in current substitute caregiver systems and suggests ways of dealing with such problems. Specifically discussed…

Introspection in Problem Solving

ERIC Educational Resources Information Center

Jäkel, Frank; Schreiber, Cornell

2013-01-01

Problem solving research has encountered an impasse. Since the seminal work of Newell und Simon (1972) researchers do not seem to have made much theoretical progress (Batchelder and Alexander, 2012; Ohlsson, 2012). In this paper we argue that one factor that is holding back the field is the widespread rejection of introspection among cognitive…

Maintaining "Professional Distance": A Dilemma for the ABE Teacher.

ERIC Educational Resources Information Center

Willing, Delight C.; Haney, Hutch

1994-01-01

Too often, many adult educators are unaware of the problems resulting from failing to maintain an appropriate "professional distance" from their adult basic education (ABE) or English-as-a-Second-Language (ESL) students when those students encounter personal problems or crises that appear to be interfering with their learning. ABE…

Student Problems. Adult Literacy Independent Learning Packet.

ERIC Educational Resources Information Center

Koefer, Ann M.

This independent learning packet, which is designed for administrators, teachers, counselors, and tutors in Pennsylvania's Region 7 Tri-Valley Literacy Staff Development area as well as for their adult students, examines the following seven problems encountered by students: the job market, child care, single parenting/parenting skills, divorce,…

Impact Assessment of Problem-Based Learning in an Engineering Science Course

ERIC Educational Resources Information Center

Nasr, Karim J.; Ramadan, Bassem H.

2008-01-01

This paper presents the development and implementation of Problem-Based Learning (PBL) in an engineering thermodynamics course at Kettering University. In this project, the thermodynamics course was restructured as modules presenting practical applications first, whereas principles were introduced just-in-time and as encountered. Theoretical…

Problems Relating to Examinations in Three-Year Technical/Natural Science Courses of Study at the Federal Armed Forces University, Munich.

ERIC Educational Resources Information Center

Ulbricht, Kurt; Zimmermann, Peter

1981-01-01

Problems encountered in testing in aerospace engineering courses in an accelerated technical program of a German military university are outlined. Four common grading procedures are compared, and the optimum length of written tests is discussed. (MSE)

Alleviating Comprehension Problems in Movies. Working Paper.

ERIC Educational Resources Information Center

Tatsuki, Donna

This paper describes the various barriers to comprehension that learners may encounter when viewing feature films in a second language. Two clusters of interfacing factors that may contribute to comprehension hot spots emerged from a quantitative analysis of problems noted in student logbooks. One cluster had a strong acoustic basis, whereas the…

The Brown University Child and Adolescent Behavior Letter, 1996.

ERIC Educational Resources Information Center

Lipsitt, Lewis P., Ed.

1996-01-01

These 12 monthly newsletters from 1996 explore the many problems encountered by children and adolescents as they grow up. Regular departments in the newsletter issues include "Keep Your Eye On...," which briefly presents results of research into childhood and adolescent problems; "What's New in Research," summarizing research…

The Brown University Child and Adolescent Behavior Letter, 1995.

ERIC Educational Resources Information Center

Lipsitt, Lewis P., Ed.

1995-01-01

These 12 monthly newsletters from 1995 explore the myriad problems encountered by children and adolescents as they grow up. Regular departments in the newsletter issues include "Keep Your Eye On...," which briefly presents results of research into childhood and adolescent problems; "New Research," summarizing research from recent publications and…

Operations Strategy with Paper Boats

ERIC Educational Resources Information Center

Sumukadas, Narendar

2010-01-01

When participants in introductory business courses encounter the term "operations strategy," it is not easy for them to appreciate what operations strategy is about, or how it fits with overall business strategy. This game breaks down highfalutin jargon into experiences that participants can readily relate to. While working in teams to make paper…

Atmospheric Propagation and Combining of High-Power Lasers

DTIC Science & Technology

2015-09-08

Brightness-scaling potential of actively phase- locked solid state laser arrays,” IEEE J. Sel. Topics Quantum Electron., vol. 13, no. 3, pp. 460–472, May...attempting to phase- lock high-power lasers, which is not encountered when phase- locking low-power lasers, for example mW power levels. Regardless, we...technology does not currently exist. This presents a challenging problem when attempting to phase- lock high-power lasers, which is not encountered when

Sexually transmitted diseases in Operation Iraqi Freedom/Operation Enduring Freedom.

PubMed

Wright, Johnnie; Albright, Todd S; Gehrich, Alan P; Dunlow, Susan G; Lettieri, Christine F; Buller, Jerome L

2006-10-01

To identify the incidence of sexually transmitted diseases (STDs) in a female active duty population deployed in support of Operation Iraqi Freedom/Operation Enduring Freedom was the objective of this study. Retrospective chart review was completed on all soldiers seeking outpatient gynecologic care at Camp Doha, Kuwait, from September 2003 through March 2004. Descriptive statistical analysis was performed on data from all patients identified as having an STD. Forty-four soldiers (2.5% of all encounters) were diagnosed with STDs during the study period. Genital herpes, Condyloma acuminata, and chlamydia were the most commonly identified infections accounting for 30, 25, and 21% of the diagnoses, respectively. Transmission of STDs in the deployed environment continues to be problematic. Viral infections were more commonly encountered than were bacterial infections. Patient education and prevention should be emphasized. Consideration should be given to STD screening upon redeployment.