The feasibility of introducing rapid diagnostic tests for malaria in drug shops in Uganda.

PubMed

Mbonye, Anthony K; Ndyomugyenyi, Richard; Turinde, Asaph; Magnussen, Pascal; Clarke, Siân; Chandler, Clare

2010-12-21

National malaria control programmes and international agencies are keen to scale-up the use of effective rapid diagnostic tests (RDTs) for malaria. The high proportion of the Ugandan population seeking care at drug shops makes these outlets attractive as providers of malaria RDTs. However, there is no precedent for blood testing at drug shops and little is known about how such tests might be perceived and used. Understanding use of drug shops by communities in Uganda is essential to inform the design of interventions to introduce RDTs. We conducted a qualitative study, with 10 community focus group discussions, and 18 in-depth interviews with drug shop attendants, health workers and district health officials. The formative study was carried out in Mukono district, central Uganda an area of high malaria endemicity from May-July 2009. Drug shops were perceived by the community as important in treating malaria and there was awareness among most drug sellers and the community that not all febrile illnesses were malaria. The idea of introducing RDTs for malaria diagnosis in drug shops was attractive to most respondents. It was anticipated that RDTs would improve access to effective treatment of malaria, offset high costs associated with poor treatment, and avoid irrational drug use. However, communities did express fear that drug shops would overprice RDTs, raising the overall treatment cost for malaria. Other fears included poor adherence to the RDT result, reuse of RDTs leading to infections and fear that RDTs would be used to test for human immune deficiency virus (HIV). All drug shops visited had no record on patient data and referral of cases to health units was noted to be poor. These results not only provide useful lessons for implementing the intervention study but have wide implications for scaling up malaria treatment in drug shops.

Prevalence of Malaria Parasitemia and Purchase of Artemisinin-Based Combination Therapies (ACTs) among Drug Shop Clients in Two Regions in Tanzania with ACT Subsidies

PubMed Central

Briggs, Melissa A.; Kalolella, Admirabilis; Bruxvoort, Katia; Wiegand, Ryan; Lopez, Gerard; Festo, Charles; Lyaruu, Pierre; Kenani, Mitya; Abdulla, Salim; Goodman, Catherine; Kachur, S. Patrick

2014-01-01

Background Throughout Africa, many people seek care for malaria in private-sector drug shops where diagnostic testing is often unavailable. Recently, subsidized artemisinin-based combination therapies (ACTs), a first-line medication for uncomplicated malaria, were made available in these drug shops in Tanzania. This study assessed the prevalence of malaria among and purchase of ACTs by drug shop clients in the setting of a national ACT subsidy program and sub-national drug shop accreditation program. Method and Findings A cross-sectional survey of drug shop clients was performed in two regions in Tanzania, one with a government drug shop accreditation program and one without, from March-May, 2012. Drug shops were randomly sampled from non-urban districts. Shop attendants were interviewed about their education, training, and accreditation status. Clients were interviewed about their symptoms and medication purchases, then underwent a limited physical examination and laboratory testing for malaria. Malaria prevalence and predictors of ACT purchase were assessed using univariate analysis and multiple logistic regression. Amongst 777 clients from 73 drug shops, the prevalence of laboratory-confirmed malaria was 12% (95% CI: 6–18%). Less than a third of clients with malaria had purchased ACTs, and less than a quarter of clients who purchased ACTs tested positive for malaria. Clients were more likely to have purchased ACTs if the participant was <5 years old (aOR: 6.6; 95% CI: 3.9–11.0) or the shop attendant had >5 years, experience (aOR: 2.8; 95% CI: 1.2–6.3). Having malaria was only a predictor of ACT purchase in the region with a drug shop accreditation program (aOR: 3.4; 95% CI: 1.5–7.4). Conclusion Malaria is common amongst persons presenting to drug shops with a complaint of fever. The low proportion of persons with malaria purchasing ACTs, and the high proportion of ACTs going to persons without malaria demonstrates a need to better target who receives ACTs in these drug shops. PMID:24732258

Prevalence of malaria parasitemia and purchase of artemisinin-based combination therapies (ACTs) among drug shop clients in two regions in Tanzania with ACT subsidies.

PubMed

Briggs, Melissa A; Kalolella, Admirabilis; Bruxvoort, Katia; Wiegand, Ryan; Lopez, Gerard; Festo, Charles; Lyaruu, Pierre; Kenani, Mitya; Abdulla, Salim; Goodman, Catherine; Kachur, S Patrick

2014-01-01

Throughout Africa, many people seek care for malaria in private-sector drug shops where diagnostic testing is often unavailable. Recently, subsidized artemisinin-based combination therapies (ACTs), a first-line medication for uncomplicated malaria, were made available in these drug shops in Tanzania. This study assessed the prevalence of malaria among and purchase of ACTs by drug shop clients in the setting of a national ACT subsidy program and sub-national drug shop accreditation program. A cross-sectional survey of drug shop clients was performed in two regions in Tanzania, one with a government drug shop accreditation program and one without, from March-May, 2012. Drug shops were randomly sampled from non-urban districts. Shop attendants were interviewed about their education, training, and accreditation status. Clients were interviewed about their symptoms and medication purchases, then underwent a limited physical examination and laboratory testing for malaria. Malaria prevalence and predictors of ACT purchase were assessed using univariate analysis and multiple logistic regression. Amongst 777 clients from 73 drug shops, the prevalence of laboratory-confirmed malaria was 12% (95% CI: 6-18%). Less than a third of clients with malaria had purchased ACTs, and less than a quarter of clients who purchased ACTs tested positive for malaria. Clients were more likely to have purchased ACTs if the participant was <5 years old (aOR: 6.6; 95% CI: 3.9-11.0) or the shop attendant had >5 years, experience (aOR: 2.8; 95% CI: 1.2-6.3). Having malaria was only a predictor of ACT purchase in the region with a drug shop accreditation program (aOR: 3.4; 95% CI: 1.5-7.4). Malaria is common amongst persons presenting to drug shops with a complaint of fever. The low proportion of persons with malaria purchasing ACTs, and the high proportion of ACTs going to persons without malaria demonstrates a need to better target who receives ACTs in these drug shops.

Opticalman 3 and 2, Rate Training Manual.

ERIC Educational Resources Information Center

Naval Personnel Program Support Activity, Washington, DC.

Theories and practical skills for use in optical shops are presented in this rate training manual, prepared for regular navy and naval reserve personnel. Light theories are analyzed in connection with mirrors, prisms, lenses, and basic optical systems. Following fundamentals of mechanical design and construction, maintenance procedures are studied…

MTR WING, TRA604. FIRST FLOOR PLAN. ENTRY LOBBY, MACHINE SHOP, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR WING, TRA-604. FIRST FLOOR PLAN. ENTRY LOBBY, MACHINE SHOP, INSTRUMENT SHOP, COUNTING ROOM, HEALTH PHYSICS LAB, LABS AND OFFICES, STORAGE, SHIPPING AND RECEIVING. BLAW-KNOX 3150-4-2, 7/1950. INL INDEX NO. 053-604-00-099-100008, REV. 7. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Heat Treat Shop in the Technical Services Building

NASA Image and Video Library

1948-01-21

A technician prepares a metal component for a high-temperature bake in the Heat Treatment Shop at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. Fabrication Division under Dan White and John Dalgleish created almost all of the equipment and models used at the laboratory. The Technical Services Building, referred to as the Fab Shop, contained a number of specialized shops in the 1940s and 1950s. These included a Machine Shop, Sheet Metal Shop, Wood and Pattern Shop, Instrument Shop, Thermocouple Shop, Heat Treating Shop, Metallurgical Laboratory, and Fabrication Office. The Metallurgical Laboratory contained a control lab for the Heat Treating Shop and a service lab for the NACA Lewis research divisions. This metallurgical group performed tensile and impact tests on metals to determine their suitability for specific research or equipment. The Heat Treating Shop heated metal parts to optimize their physical properties and contained a Precision Castings Foundry to manufacture equipment made of heat resisting alloys.

Cooperative educational project for optical technicians utilizing amateur telescope making

NASA Astrophysics Data System (ADS)

Williamson, Ray

2004-01-01

In the modern optical shop, technicians are typically skilled machine operators who work on only one phase of the manufacture for each and every component. The product is designed, specified, methodized, scheduled and integrated by people off the shop floor. Even at the component level, the people inside the shop usually see only one stage of completion. In an effort to make the relevance of their work visible; to demonstrate competence to their peers; to gain appreciation for the work of others; and to give them a meaningful connection with the functions of optical systems, I created "The Telescope Project" for my former employer. I invited those interested to participate in an after-hours, partially subsidized project to build telescopes for themselves. The ground-rules included that we would all make the same design (thus practicing consensus and configuration management); that we would all work on every phase (thus learning from each other); and that we would obtain our parts by random lot at the end (thus making quality assurance a personal issue). In the process the participating technicians learned about optical theory, design, tolerancing, negotiation, scheduling, purchasing, fabrication, coating and assembly. They developed an appreciation for each other's contributions and a broader perspective on the consequences of their actions. In the end, each obtained a high-quality telescope for his or her personal use. Several developed an abiding love for astronomy. The project generated much interest from technicians who didn"t initially choose to participate. In this paper I describe the project in detail.

Shop test of the 501F; A 150 MW combustion turbine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Entenmann, D.T.; North, W.E.; Fukue, I.

1991-10-01

The 501F is a 150 MW-class 60 Hz engine jointly developed by Westinghouse Electric Corporation and Mitsubishi Heavy Industries, Ltd. This paper describes the full-load shop test program for the prototype engine, as carried out in Takasago, Japan. The shop test included a full range of operating conditions, from startup through full load at the 1260{degrees} C (2300{degrees} F) design turbine inlet temperature. The engine was prepared with more than 1500 instrumentation points to monitor flow path characteristics, metal temperatures, displacements, pressures, cooling circuit characteristics, strains, sound pressure levels, and exhaust emissions. The results of this shop test indicate themore » new 501F engine design and development effort to be highly successful. The engine exceeds power and overall efficiency expectations, thus verifying the new concepts and design improvements.« less

Feasibility of distributing rapid diagnostic tests for malaria in the retail sector: evidence from an implementation study in Uganda.

PubMed

Cohen, Jessica; Fink, Günther; Berg, Katrina; Aber, Flavia; Jordan, Matthew; Maloney, Kathleen; Dickens, William

2012-01-01

Despite the benefits of malaria diagnosis, most presumed malaria episodes are never tested. A primary reason is the absence of diagnostic tests in retail establishments, where many patients seek care. Malaria rapid diagnostic tests (RDTs) in drug shops hold promise for guiding appropriate treatment. However, retail providers generally lack awareness of RDTs and training to administer them. Further, unsubsidized RDTs may be unaffordable to patients and unattractive to retailers. This paper reports results from an intervention study testing the feasibility of RDT distribution in Ugandan drug shops. 92 drug shops in 58 villages were offered subsidized RDTs for sale after completing training. Data on RDT purchases, storage, administration and disposal were collected, and samples were sent for quality testing. Household surveys were conducted to capture treatment outcomes. Estimated daily RDT sales varied substantially across shops, from zero to 8.46 RDTs per days. Overall compliance with storage, treatment and disposal guidelines was excellent. All RDTs (100%) collected from shops passed quality testing. The median price charged for RDTs was 1000USH ($0.40), corresponding to a 100% markup, and the same price as blood slides in local health clinics. RDTs affected treatment decisions. RDT-positive patients were 23 percentage points more likely to buy Artemisinin Combination Therapies (ACTs) (p = .005) and 33.1 percentage points more likely to buy other antimalarials (p<.001) than RDT-negative patients, and were 5.6 percentage points more likely to buy ACTs (p = .05) and 31.4 percentage points more likely to buy other antimalarials (p<.001) than those not tested at all. Despite some heterogeneity, shops demonstrated a desire to stock RDTs and use them to guide treatment recommendations. Most shops stored, administered and disposed of RDTs properly and charged mark-ups similar to those charged on common medicines. Results from this study suggest that distributing RDTs through the retail sector is feasible and can reduce inappropriate treatment for suspected malaria.

40 CFR 63.7823 - What test methods and other procedures must I use to demonstrate initial compliance with the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... subpart for BOPF shops: (1) For an existing BOPF shop: (i) Using a certified observer, determine the... consecutive observations recorded at 15-second intervals. (2) For a new BOPF shop housing a bottom-blown BOPF... average opacities for each steel production cycle. (3) For a new BOPF shop housing a top-blown BOPF: (i...

40 CFR 63.7823 - What test methods and other procedures must I use to demonstrate initial compliance with the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... subpart for BOPF shops: (1) For an existing BOPF shop: (i) Using a certified observer, determine the... consecutive observations recorded at 15-second intervals. (2) For a new BOPF shop housing a bottom-blown BOPF... average opacities for each steel production cycle. (3) For a new BOPF shop housing a top-blown BOPF: (i...

40 CFR 63.7823 - What test methods and other procedures must I use to demonstrate initial compliance with the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... subpart for BOPF shops: (1) For an existing BOPF shop: (i) Using a certified observer, determine the... consecutive observations recorded at 15-second intervals. (2) For a new BOPF shop housing a bottom-blown BOPF... average opacities for each steel production cycle. (3) For a new BOPF shop housing a top-blown BOPF: (i...

241-AZ-101 Waste Tank Color Video Camera System Shop Acceptance Test Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

WERRY, S.M.

2000-03-23

This report includes shop acceptance test results. The test was performed prior to installation at tank AZ-101. Both the camera system and camera purge system were originally sought and procured as a part of initial waste retrieval project W-151.

Southwest Electronic One-Stop Shopping (EOSS) : field operational test : final evaluation report

DOT National Transportation Integrated Search

1999-06-01

This report presents an evaluation of the Southwest Electronic One-Stop Shopping System (EOSS) Operational Test. The system consisted of a PC-based software application that enabled interstate carriers to identify required commercial vehicle credenti...

Feasibility of Distributing Rapid Diagnostic Tests for Malaria in the Retail Sector: Evidence from an Implementation Study in Uganda

PubMed Central

Cohen, Jessica; Fink, Günther; Berg, Katrina; Aber, Flavia; Jordan, Matthew; Maloney, Kathleen; Dickens, William

2012-01-01

Background Despite the benefits of malaria diagnosis, most presumed malaria episodes are never tested. A primary reason is the absence of diagnostic tests in retail establishments, where many patients seek care. Malaria rapid diagnostic tests (RDTs) in drug shops hold promise for guiding appropriate treatment. However, retail providers generally lack awareness of RDTs and training to administer them. Further, unsubsidized RDTs may be unaffordable to patients and unattractive to retailers. This paper reports results from an intervention study testing the feasibility of RDT distribution in Ugandan drug shops. Methods and Findings 92 drug shops in 58 villages were offered subsidized RDTs for sale after completing training. Data on RDT purchases, storage, administration and disposal were collected, and samples were sent for quality testing. Household surveys were conducted to capture treatment outcomes. Estimated daily RDT sales varied substantially across shops, from zero to 8.46 RDTs per days. Overall compliance with storage, treatment and disposal guidelines was excellent. All RDTs (100%) collected from shops passed quality testing. The median price charged for RDTs was 1000USH ($0.40), corresponding to a 100% markup, and the same price as blood slides in local health clinics. RDTs affected treatment decisions. RDT-positive patients were 23 percentage points more likely to buy Artemisinin Combination Therapies (ACTs) (p = .005) and 33.1 percentage points more likely to buy other antimalarials (p<.001) than RDT-negative patients, and were 5.6 percentage points more likely to buy ACTs (p = .05) and 31.4 percentage points more likely to buy other antimalarials (p<.001) than those not tested at all. Conclusions Despite some heterogeneity, shops demonstrated a desire to stock RDTs and use them to guide treatment recommendations. Most shops stored, administered and disposed of RDTs properly and charged mark-ups similar to those charged on common medicines. Results from this study suggest that distributing RDTs through the retail sector is feasible and can reduce inappropriate treatment for suspected malaria. PMID:23152766

Pet shop workers: exposure, sensitization, and work-related symptoms.

PubMed

Renström, A; Olsson, M; Hedrén, M; Johansson, S G O; van Hage, M

2011-08-01

Allergy to laboratory animals is a well-known occupational hazard. The aim was to investigate the frequency of allergic sensitization and respiratory symptoms among pet shop staff and to document their work environment. Subjects (n = 59) from 24 pet shops were investigated with a questionnaire and lung function tests and skin prick tests against a panel of common inhalant and pet shop allergens. Blood samples were taken for immunoglobulin E (IgE) and IgE antibodies against Phadiatop and specific pet shop allergens. Personal airborne rodent allergen (n = 40) and endotoxin exposure (n = 40) was measured during work. Airborne rodent allergens were also collected using petri dishes at work (n = 40) and at home (n = 45). Fifty-three percent reported nasal symptoms, 34% eye symptoms, and 22% had experienced symptoms indicating asthma. However, only four workers (7%) were previously diagnosed with asthma. One-third reported respiratory symptoms at work, mostly against rodents, birds, insects, and hay, and 29% were sensitized to work-related allergens, mainly rodents and fodder insects, e.g., Zophobas. Atopy and total IgE > 100 kU/l increased prevalence of pet shop sensitization [prevalence ratio (PR) 17 and 5.5, respectively], and atopy increased work-related symptoms (PR 3.2). Endotoxin levels were similar between shops with and without rodents. Exposure to animals outside of work was extensive. A third of the pet shop workers reported airway symptoms at work or were sensitized, sometimes to unusual pet shop allergens, especially among atopics. The findings stress the importance of improving the knowledge of health risks and allergen avoidance measures among pet shop staff. © 2011 John Wiley & Sons A/S.

3. SHOP AREA. Looking west into storage cage from near ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. SHOP AREA. Looking west into storage cage from near northeast corner of room. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

5. METAL SHOP ROOM (AREA 108 ON PLAN CA236R36). Looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. METAL SHOP ROOM (AREA 108 ON PLAN CA-236-R-36). Looking northeast. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

4. NORTH END OF TERMINAL ROOM, SHOP LEVEL SHOWING SPIRAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. NORTH END OF TERMINAL ROOM, SHOP LEVEL SHOWING SPIRAL STAIR TO CABLE RACK. Looking north. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

2. TERMINAL ROOM, SHOP LEVEL INTERIOR, SHOWING MEZZANINE LEVEL CABLE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. TERMINAL ROOM, SHOP LEVEL INTERIOR, SHOWING MEZZANINE LEVEL CABLE RACK AT UPPER RIGHT. Looking north. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

Summary of the 1987 soil sampling effort at the Idaho National Engineering Laboratory Test Reactor Area Paint Shop Ditch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, T.R.; Knight, J.L.; Hertzler, C.L.

1989-08-01

Sampling of the Test Reactor Area (TRA) Paint Shop Ditch at the Idaho National Engineering Laboratory was initiated in compliance with the Interim Agreement between the Department of Energy (DOE) and the Environmental Protection Agency (EPA). Sampling of the TRA Paint Shop Ditch was done as part of the Action Plan to achieve and maintain compliance with the Resource Conservation and Recovery Act (RCRA) and applicable regulations. It is the purpose of this document to provide a summary of the July 6, 1987 sampling activities that occurred in ditch west of Building TRA-662, which housed the TRA Paint Shop inmore » 1987. This report will give a narrative description of the field activities, locations of collected samples, discuss the sampling procedures and the chemical analyses. Also included in the scope of this report is to bring together data and reports on the TRA Paint Shop Ditch for archival purposes. 6 refs., 10 figs., 8 tabs.« less

Silicon saw-tooth refractive lens for high-energy x-rays made using a diamond saw.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Said, A. H.; Shastri, S. D.; X-Ray Science Division

2010-01-01

Silicon is a material well suited for refractive lenses operating at high X-ray energies (>50 keV), particularly if implemented in a single-crystal form to minimize small-angle scattering. A single-crystal silicon saw-tooth refractive lens, fabricated by a dicing process using a thin diamond wheel, was tested with 115 keV X-rays, giving an ideal 17 {mu}m line focus width in a long focal length, 2:1 ratio demagnification geometry, with a source-to-focus distance of 58.5 m. The fabrication is simple, using resources typically available at any synchrotron facility's optics shop.

Shopper marketing: a new challenge for Spanish community pharmacies.

PubMed

Gavilan, Diana; Avello, Maria; Abril, Carmen

2014-01-01

Changes that have occurred over the past few decades in retailing and in the health care sector--namely, a drastic reduction in drug profit-margins, and a more critical use of health services by patients--have created a scenario characterized by rising competitiveness. This new context is necessitating community pharmacies (hereafter, pharmacies) to improve their business model through new strategies. Shopper marketing has proven invaluable in other retail settings and therefore, could be a critical element for new practices in pharmacies. First, to analyze how shopping experiences in pharmacies based on new practices in shopper marketing affect shopping behavior. Second, to study the mediating effect of customer satisfaction on the relationship between shopping experiences and shopping behavior. A self-reported questionnaire was developed to measure four concepts: hedonic experience (enjoyable), functional experience (goal-oriented), customer satisfaction and shopping behavior. Data were collected from 28 different pharmacies dispersed throughout Spain. Structural equation modeling (SEM) was used to test the relationships in the theoretical model. First, the measurement model was estimated to assess model fit, reliability, convergent and discriminant validity. Then, the parameters of the structural model were estimated and the mediation effects were subsequently tested. Functional experience and hedonic experience each significantly and positively correlate with consumer satisfaction and with customer shopping behavior (purchases and loyalty). Moreover, the effects of each type of experience on shopping behavior are partially mediated by customer satisfaction. The results suggest that even in Spanish pharmacies, which have traditionally been considered as strictly functional retailers, ensuring customer satisfaction and enhancing shopping behavior now demand more than just functional experiences. Moreover, a customer's experience at a pharmacy can itself trigger a shopping cycle; therefore, pharmacists should consider prioritizing investments in hedonic experiences. Copyright © 2014 Elsevier Inc. All rights reserved.

Photographic copy of architectural drawings for Building 4315: Taylor & ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawings for Building 4315: Taylor & Barnes, Architects & Engineers, 803 W. Third Street, Los Angeles California, O.C.E. Office of Civil Engineer Job No. Muroc ESA 210-50 and 210-44, Military Construction: Muroc Flight Test Base, Muroc, California, Utility Yard & Shops: Carpenter & Paint Shop, Utility Shop & Lavatory, Plan & Elevations, Sheet No. 4 of 8, May 1945. Reproduced from the holdings of the National Archives, Pacific Southwest Region - Edwards Air Force Base, North Base, Utility & Paint Shop, Second & E Streets, Boron, Kern County, CA

A Cluster Randomised Trial Introducing Rapid Diagnostic Tests into Registered Drug Shops in Uganda: Impact on Appropriate Treatment of Malaria

PubMed Central

Mbonye, Anthony K.; Magnussen, Pascal; Lal, Sham; Hansen, Kristian S.; Cundill, Bonnie; Chandler, Clare; Clarke, Siân E.

2015-01-01

Background Inappropriate treatment of malaria is widely reported particularly in areas where there is poor access to health facilities and self-treatment of fevers with anti-malarial drugs bought in shops is the most common form of care-seeking. The main objective of the study was to examine the impact of introducing rapid diagnostic tests for malaria (mRDTs) in registered drug shops in Uganda, with the aim to increase appropriate treatment of malaria with artemisinin-based combination therapy (ACT) in patients seeking treatment for fever in drug shops. Methods A cluster-randomized trial of introducing mRDTs in registered drug shops was implemented in 20 geographical clusters of drug shops in Mukono district, central Uganda. Ten clusters were randomly allocated to the intervention (diagnostic confirmation of malaria by mRDT followed by ACT) and ten clusters to the control arm (presumptive treatment of fevers with ACT). Treatment decisions by providers were validated by microscopy on a reference blood slide collected at the time of consultation. The primary outcome was the proportion of febrile patients receiving appropriate treatment with ACT defined as: malaria patients with microscopically-confirmed presence of parasites in a peripheral blood smear receiving ACT or rectal artesunate, and patients with no malaria parasites not given ACT. Findings A total of 15,517 eligible patients (8672 intervention and 6845 control) received treatment for fever between January-December 2011. The proportion of febrile patients who received appropriate ACT treatment was 72·9% versus 33·7% in the control arm; a difference of 36·1% (95% CI: 21·3 – 50·9), p<0·001. The majority of patients with fever in the intervention arm accepted to purchase an mRDT (97·8%), of whom 58·5% tested mRDT-positive. Drug shop vendors adhered to the mRDT results, reducing over-treatment of malaria by 72·6% (95% CI: 46·7– 98·4), p<0·001) compared to drug shop vendors using presumptive diagnosis (control arm). Conclusion Diagnostic testing with mRDTs compared to presumptive treatment of fevers implemented in registered drug shops substantially improved appropriate treatment of malaria with ACT. Trial Registration ClinicalTrials.gov NCT01194557. PMID:26200467

A Cluster Randomised Trial Introducing Rapid Diagnostic Tests into Registered Drug Shops in Uganda: Impact on Appropriate Treatment of Malaria.

PubMed

Mbonye, Anthony K; Magnussen, Pascal; Lal, Sham; Hansen, Kristian S; Cundill, Bonnie; Chandler, Clare; Clarke, Siân E

2015-01-01

Inappropriate treatment of malaria is widely reported particularly in areas where there is poor access to health facilities and self-treatment of fevers with anti-malarial drugs bought in shops is the most common form of care-seeking. The main objective of the study was to examine the impact of introducing rapid diagnostic tests for malaria (mRDTs) in registered drug shops in Uganda, with the aim to increase appropriate treatment of malaria with artemisinin-based combination therapy (ACT) in patients seeking treatment for fever in drug shops. A cluster-randomized trial of introducing mRDTs in registered drug shops was implemented in 20 geographical clusters of drug shops in Mukono district, central Uganda. Ten clusters were randomly allocated to the intervention (diagnostic confirmation of malaria by mRDT followed by ACT) and ten clusters to the control arm (presumptive treatment of fevers with ACT). Treatment decisions by providers were validated by microscopy on a reference blood slide collected at the time of consultation. The primary outcome was the proportion of febrile patients receiving appropriate treatment with ACT defined as: malaria patients with microscopically-confirmed presence of parasites in a peripheral blood smear receiving ACT or rectal artesunate, and patients with no malaria parasites not given ACT. A total of 15,517 eligible patients (8672 intervention and 6845 control) received treatment for fever between January-December 2011. The proportion of febrile patients who received appropriate ACT treatment was 72·9% versus 33·7% in the control arm; a difference of 36·1% (95% CI: 21·3 - 50·9), p<0·001. The majority of patients with fever in the intervention arm accepted to purchase an mRDT (97·8%), of whom 58·5% tested mRDT-positive. Drug shop vendors adhered to the mRDT results, reducing over-treatment of malaria by 72·6% (95% CI: 46·7- 98·4), p<0·001) compared to drug shop vendors using presumptive diagnosis (control arm). Diagnostic testing with mRDTs compared to presumptive treatment of fevers implemented in registered drug shops substantially improved appropriate treatment of malaria with ACT. ClinicalTrials.gov NCT01194557.

40 CFR 63.1653 - Opacity standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Opacity standards. No owner or operator shall cause emissions exiting from a shop due solely to operations... during any performance test, with the following exceptions: (a) Visible particulate emissions from a shop...

1. TERMINAL ROOM, INTERIOR, SHOP LEVEL, SHOWING FIRE EXTINGUISHING SYSTEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. TERMINAL ROOM, INTERIOR, SHOP LEVEL, SHOWING FIRE EXTINGUISHING SYSTEM PIPES AND VALVES AT LEFT. Looking southeast from entrance to terminal room. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

First University of Michigan Strongarm sounding rocket on launcher at Wallops for test, November 10, 1959E5-188 Shop and Launcher Pictures

NASA Image and Video Library

1959-11-10

L59-7932 First University of Michigan Strongarm sounding rocket on launcher at Wallops for test, November 10, 1959. Photograph published in A New Dimension Wallops Island Flight Test Range: The First Fifteen Years by Joseph Shortal. A NASA publication. Page 701.E5-188 Shop and Launcher Pictures

Market Research on Law School Student Aid Award Letters and Shopping Sheet Information. NASFAA Consumer Information & Law Student Indebtedness Task Force Report

ERIC Educational Resources Information Center

National Association of Student Financial Aid Administrators, 2016

2016-01-01

"Market Research on Law School Student Aid Award Letters and Shopping Sheet Information" set out to identify through consumer testing what information on the financial aid award letter and U.S. Department of Education's (ED) Shopping Sheet could be modified to create a document that better assists students applying to, or currently…

Design and Testing of an Air Force Services Mystery Shopping Program.

DTIC Science & Technology

1998-11-01

Base level Air Force Services’ lodging and foodservice activities use limited service quality measurement tools to determine customer perceptions of... service quality . These tools, specifically management observation and customer comment cards, do not provide a complete picture of service quality . Other... service quality measurement methods such as mystery shopping are rarely used. Bases do not consider using mystery shopping programs because of the

Fruit and vegetable shopping practices and social support scales: A validation.

PubMed

Baranowski, Tom; Missaghian, Mariam; Broadfoot, Alison; Watson, Kathy; Cullen, Karen; Nicklas, Theresa; Fisher, Jennifer; Baranowski, Janice; O'Donnell, Sharon

2006-01-01

To assess the psychometric characteristics of new scales of shopping practices and social support for purchasing fruits and vegetables. Participants were recruited in front of diverse grocery stores. Telephone data collection was done on 2 occasions, separated by 6 weeks. 166 food shoppers with children at home participated. New scales of food shopping practices and social support for purchasing fruits and vegetables were psychometrically analyzed and related to a measure of home fruit or vegetable availability as a test of construct validity. Both classical test and item response theory procedures were used. Correlations related the new measures to home fruit and vegetable availability. Single dimension scales were specified for fruit and vegetable shopping practices (35% of the variance), fruit purchase social support (53% of the variance), and vegetable purchase social support (52% of the variance). Item response theory difficulty estimates varied from -0.64 to 0.73 for fruit and vegetable shopping practices, from -0.55 to 0.33 for fruit purchase social support, and from -0.55 to 0.34 for vegetable social support. Each scale significantly correlated with home fruit and vegetable availability (construct validity), even after controlling for social desirability of response (0.19 for shopping practices, 0.37 for fruit purchasing social support, and 0.28 for vegetable purchasing social support). Person separation reliability was 0.80 for food shopping practices, 0.74 for fruit purchasing social support, and 0.73 for vegetable purchasing social support. The scales performed well. These scales are now available to help better understand fruit and vegetable shopping practices, fruit purchase social support, and vegetable purchase social support.

Working with the superabrasives industry to optimize tooling for grinding brittle materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, J.S.; Piscotty, M.A.; Blaedel, K.L.

1996-05-01

The optics manufacturing industry is undertaking a significant modernization, as computer-numeric-controlled (CNC) equipment is joining or replacing open-loop equipment and hand lapping/polishing on the shop floor. Several prototype CNC lens grinding platforms employing ring tools are undergoing development and demonstration at the Center for Optics Manufacturing in Rochester, NY, and several machine tool companies have CNC product lines aimed at the optics industry. Benefits to using CNC ring tool grinding equipment include: essentially unlimited flexibility in selecting radii of curvature without special radiused tooling, the potential for CIM linkages to CAD workstations, and the cultural shift from craftsmen with undocumentedmore » procedures to CNC machine operators employing computerized routines for process control. In recent years, these developments, have inspired a number of US optics companies to invest in CNC equipment and participate in process development activities involving bound diamond tooling. This modernization process,extends beyond large optics companies that have historically embraced advanced equipment, to also include smaller optical shops where a shift to CNC equipment requires a significant company commitment. This paper addresses our efforts to optimize fine grinding wheels to support the new generation of CNC equipment. We begin with a discussion of how fine grinding fits into the optical production process, and then describe an initiative for improving the linkage between optics industry and the grinding wheel industry. For the purposes of this paper, we define fine wheels to have diamond sizes below 20 micrometers, which includes wheels used for what is sometimes called medium grinding (e.g. 10-20 micrometers diamond) and for fine grinding (e.g. 2-4 micrometers diamond).« less

2. SOUTHEAST SIDE AND NORTHEAST REAR. SHOP BUILDING IN DISTANCE. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. SOUTHEAST SIDE AND NORTHEAST REAR. SHOP BUILDING IN DISTANCE. NOTE CONCRETE PROTECTION SLAB FOR UNDERGROUND CONTROL ROOM AND ESCAPE HATCH ON GROUND AT RIGHT MIDDLE DISTANCE. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Firing Control Building, Test Area 1-100, northeast end of Test Area 1-100 Road, Boron, Kern County, CA

85. View of specialized maintenance shop in transmitter building no. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

85. View of specialized maintenance shop in transmitter building no. 101, showing test bed with meters, power supplies, oscilloscopes, and other electronic test equipment. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

Pneumo MSG-325 Lathe

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhorer, R.L.

1980-01-01

The LASL Shop Department has recently installed a Pneumo MSG-325 two-axis contouring lathe. This one-microinch resolution lathe, which utilizes both air-bearing spindle and air bearing slide ways, was purchased primarily for miniature work, but can also single point diamond turn metal optics.

A&M. TAN607 third floor plan for hot shop. Crane control ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 third floor plan for hot shop. Crane control rooms and their shielding windows. Plenum. Wall rack for manipulators in hot shop. Ralph M. Parsons 902-3-ANP-607-A 103. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106755 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Treatment of chromium contaminated plating shop rinsewater streams by reverse osmosis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, J.F.; Brown, C.H. Jr.; Wilson, J.H.

1988-01-01

Wastewater is discharged to the local sanitary sewer, which is regulated by a Metropolitan Sewer District (MSD). The MSD has established discharge limits and reports have indicated that the major source of wastewater and primary area of concern is the discharge from the industrial plating shop within the plant complex. This plating shop generates /approximately/1100 m/sup 3/ (300,000 gal) of wastewater per day. Because construction of a new plating shop is currently planned, a complete renovation of the existing plating shop is not economically feasible. The sponsor demonstrated the use of innovative wastewater treatment technologies that will minimize the amountmore » of wastewater generated from the plating processes and maintain compliance with MSD discharge limits until the new plating shop is constructed. The problems at the facility have been analyzed and a treatment system utilizing reverse osmosis (RO), with volume reduction of the RO concentrate by evaporation, has been recommended. The utilization of RO meets the specification for the demonstration of innovative technology. This paper discusses the problem analysis at the plant as well as the results of a pilot scale RO test program currently being conducted. The installation of the full scale unit is dependent on the successful completion of the RO pilot tests. 1 ref., 6 figs., 3 tabs.« less

Development of a cognitive function test using virtual reality technology: examination in healthy participants.

PubMed

Sakai, Hiromi; Nagano, Akinori; Seki, Keiko; Okahashi, Sayaka; Kojima, Maki; Luo, Zhiwei

2018-07-01

We developed a virtual reality test to assess the cognitive function of Japanese people in near-daily-life environment, namely, a virtual shopping test (VST). In this test, participants were asked to execute shopping tasks using touch panel operations in a "virtual shopping mall." We examined differences in VST performances among healthy participants of different ages and correlations between VST and screening tests, such as the Mini-Mental State Examination (MMSE) and Everyday Memory Checklist (EMC). We included 285 healthy participants between 20 and 86 years of age in seven age groups. Therefore, each VST index tended to decrease with advancing age; differences among age groups were significant. Most VST indices had a significantly negative correlation with MMSE and significantly positive correlation with EMC. VST may be useful for assessing general cognitive decline; effects of age must be considered for proper interpretation of the VST scores.

KSC-2010-5310

NASA Image and Video Library

2010-10-27

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the 600-Ton Test Fixture outside the Launch Equipment Test Facility conducts a 500,000-pound pull test of a bridge crane lifting element, which is used to lift space shuttles in the Vehicle Assembly Building. The fixture proofload tests, in tension and compression, a variety of ground support equipment, including slings, lifting beams and other critical lifting hardware that require periodic proofloading. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. The facility recently underwent a major upgrade to support even more programs, projects and customers. It houses a 6,000-square-foot high bay, cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator, launch simulation towers and a cryogenic system. Photo credit: NASA/Jim Grossmann

KSC-2010-5308

NASA Image and Video Library

2010-10-27

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the 600-Ton Test Fixture outside the Launch Equipment Test Facility is prepared to conduct a 500,000-pound pull test of a bridge crane lifting element, which is used to lift space shuttles in the Vehicle Assembly Building. The fixture proofload tests, in tension and compression, a variety of ground support equipment, including slings, lifting beams and other critical lifting hardware that require periodic proofloading. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. The facility recently underwent a major upgrade to support even more programs, projects and customers. It houses a 6,000-square-foot high bay, cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator, launch simulation towers and a cryogenic system. Photo credit: NASA/Jim Grossmann

KSC-2010-5311

NASA Image and Video Library

2010-10-27

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the 600-Ton Test Fixture outside the Launch Equipment Test Facility conducts a 500,000-pound pull test of a bridge crane lifting element, which is used to lift space shuttles in the Vehicle Assembly Building. The fixture proofload tests, in tension and compression, a variety of ground support equipment, including slings, lifting beams and other critical lifting hardware that require periodic proofloading. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. The facility recently underwent a major upgrade to support even more programs, projects and customers. It houses a 6,000-square-foot high bay, cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator, launch simulation towers and a cryogenic system. Photo credit: NASA/Jim Grossmann

KSC-2010-5309

NASA Image and Video Library

2010-10-27

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the 600-Ton Test Fixture outside the Launch Equipment Test Facility conducts a 500,000-pound pull test of a bridge crane lifting element, which is used to lift space shuttles in the Vehicle Assembly Building. The fixture proofload tests, in tension and compression, a variety of ground support equipment, including slings, lifting beams and other critical lifting hardware that require periodic proofloading. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. The facility recently underwent a major upgrade to support even more programs, projects and customers. It houses a 6,000-square-foot high bay, cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator, launch simulation towers and a cryogenic system. Photo credit: NASA/Jim Grossmann

Prevalence of dry methods in granite countertop fabrication in Oklahoma.

PubMed

Phillips, Margaret L; Johnson, Andrew C

2012-01-01

Granite countertop fabricators are at risk of exposure to respirable crystalline silica, which may cause silicosis and other lung conditions. The purpose of this study was to estimate the prevalence of exposure control methods, especially wet methods, in granite countertop fabrication in Oklahoma to assess how many workers might be at risk of overexposure to crystalline silica in this industry. Granite fabrication shops in the three largest metropolitan areas in Oklahoma were enumerated, and 47 of the 52 shops participated in a survey on fabrication methods. Countertop shops were small businesses with average work forces of fewer than 10 employees. Ten shops (21%) reported using exclusively wet methods during all fabrication steps. Thirty-five shops (74%) employing a total of about 200 workers reported using dry methods all or most of the time in at least one fabrication step. The tasks most often performed dry were edge profiling (17% of shops), cutting of grooves for reinforcing rods (62% of shops), and cutting of sink openings (45% of shops). All shops reported providing either half-face or full-face respirators for use during fabrication, but none reported doing respirator fit testing. Few shops reported using any kind of dust collection system. These findings suggest that current consumer demand for granite countertops is giving rise to a new wave of workers at risk of silicosis due to potential overexposure to granite dust.

Performance on a computerized shopping task significantly predicts real world functioning in persons diagnosed with bipolar disorder.

PubMed

Laloyaux, Julien; Pellegrini, Nadia; Mourad, Haitham; Bertrand, Hervé; Domken, Marc-André; Van der Linden, Martial; Larøi, Frank

2013-12-15

Persons diagnosed with bipolar disorder often suffer from cognitive impairments. However, little is known concerning how these cognitive deficits impact their real world functioning. We developed a computerized real-life activity task, where participants are required to shop for a list of grocery store items. Twenty one individuals diagnosed with bipolar disorder and 21 matched healthy controls were administered the computerized shopping task. Moreover, the patient group was assessed with a battery of cognitive tests and clinical scales. Performance on the shopping task significantly differentiated patients and healthy controls for two variables: Total time to complete the shopping task and Mean time spent to consult the shopping list. Moreover, in the patient group, performance on these variables from the shopping task correlated significantly with cognitive functioning (i.e. processing speed, verbal episodic memory, planning, cognitive flexibility, and inhibition) and with clinical variables including duration of illness and real world functioning. Finally, variables from the shopping task were found to significantly explain 41% of real world functioning of patients diagnosed with bipolar disorder. These findings suggest that the shopping task provides a good indication of real world functioning and cognitive functioning of persons diagnosed with bipolar disorder. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

High resolution optical surface metrology with the slope measuring portable optical test system

NASA Astrophysics Data System (ADS)

Maldonado, Alejandro V.

New optical designs strive to achieve extreme performance, and continually increase the complexity of prescribed optical shapes, which often require wide dynamic range and high resolution. SCOTS, or the Software Configurable Optical Test System, can measure a wide range of optical surfaces with high sensitivity using surface slope. This dissertation introduces a high resolution version of SCOTS called SPOTS, or the Slope measuring Portable Optical Test System. SPOTS improves the metrology of surface features on the order of sub-millimeter to decimeter spatial scales and nanometer to micrometer level height scales. Currently there is no optical surface metrology instrument with the same utility. SCOTS uses a computer controlled display (such as an LCD monitor) and camera to measure surface slopes over the entire surface of a mirror. SPOTS differs in that an additional lens is placed near the surface under test. A small prototype system is discussed in general, providing the support for the design of future SPOTS devices. Then the SCOTS instrument transfer function is addressed, which defines the way the system filters surface heights. Lastly, the calibration and performance of larger SPOTS device is analyzed with example measurements of the 8.4-m diameter aspheric Large Synoptic Survey Telescope's (LSST) primary mirror. In general optical systems have a transfer function, which filters data. In the case of optical imaging systems the instrument transfer function (ITF) follows the modulation transfer function (MTF), which causes a reduction of contrast as a function of increasing spatial frequency due to diffraction. In SCOTS, ITF is shown to decrease the measured height of surface features as their spatial frequency increases, and thus the SCOTS and SPOTS ITF is proportional to their camera system's MTF. Theory and simulations are supported by a SCOTS measurement of a test piece with a set of lithographically written sinusoidal surface topographies. In addition, an example of a simple inverse filtering technique is provided. The success of a small SPOTS proof of concept instrument paved the way for a new larger prototype system, which is intended to measure subaperture regions on large optical mirrors. On large optics, the prototype SPOTS is light weight and it rests on the surface being tested. One advantage of this SPOTS is stability over time in maintaining its calibration. Thus the optician can simply place SPOTS on the mirror, perform a simple alignment, collect measurement data, then pick the system up and repeat at a new location. The entire process takes approximately 5 to 10 minutes, of which 3 minutes is spent collecting data. SPOTS' simplicity of design, light weight, robustness, wide dynamic range, and high sensitivity make it a useful tool for optical shop use during the fabrication and testing process of large and small optics.

Introducing rapid tests for malaria into the retail sector: what are the unintended consequences?

PubMed Central

Hutchinson, Eleanor; Hutchison, Coll; Lal, Sham; Hansen, Kristian; Kayendeke, Miriam; Nabirye, Christine; Magnussen, Pascal; Mbonye, Anthony; Chandler, Clare I R

2017-01-01

The observation that many people in Africa seek care for febrile illness in the retail sector has led to a number of public health initiatives to try to improve the quality of care provided in these settings. The potential to support the introduction of rapid diagnostic tests for malaria (mRDTs) into drug shops is coming under increased scrutiny. Those in favour argue that it enables the harmonisation of policy around testing and treatment for malaria and maintains a focus on market-based solutions to healthcare. Despite the enthusiasm among many global health actors for this policy option, there is a limited understanding of the consequences of the introduction of mRDTs in the retail sector. We undertook an interpretive, mixed methods study with drug shop vendors (DSVs), their clients and local health workers to explore the uses and interpretations of mRDTs as they became part of daily practice in drug shops during a trial in Mukono District, Uganda. This paper reports the unintended consequences of their introduction. It describes how the test engendered trust in the professional competence of DSVs; was misconstrued by clients and providers as enabling a more definitive diagnosis of disease in general rather than malaria alone; that blood testing made drug shops more attractive places to seek care than they had previously been; was described as shifting treatment-seeking behaviour away from formal health centres and into drug shops; and influenced an increase in sales of medications, particularly antibiotics. Trial registration number NCT01194557; Results. PMID:28588992

MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR MEZZANINE: LUNCH AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR MEZZANINE: LUNCH AND CONFERENCE ROOM, STORAGE AREA, OFFICES FOR FOREMEN, STENOS, ENGINEERS, DISPATCHER, WOMEN'S RESTROOM. HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-12, 2/1958. INL INDEX NO. 532-0653-00-381-102837, REV. 3. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

How Peer Communication and Engagement Motivations Influence Social Media Shopping Behavior: Evidence from China and the United States.

PubMed

Muralidharan, Sidharth; Men, Linjuan Rita

2015-10-01

Based on consumer socialization theory, this study proposes and tests a conceptual model of social media shopping behavior, which links the antecedents of user motivations of engagement and peer communication about products to shopping behavior through social media. A cross-cultural survey was conducted with social media users in two culturally distinct markets with the largest Internet population: China (n=304) and the United States (n=328). Findings showed that social interaction, information, and remuneration were positive antecedents of peer communication for users from both countries. Peer communication positively impacted social media shopping behavior, and cultural differences were observed, with social interaction being important to Chinese users' shopping behavior, while remuneration was more important to American users. Implications are discussed.

Consumer's Online Shopping Influence Factors and Decision-Making Model

NASA Astrophysics Data System (ADS)

Yan, Xiangbin; Dai, Shiliang

Previous research on online consumer behavior has mostly been confined to the perceived risk which is used to explain those barriers for purchasing online. However, perceived benefit is another important factor which influences consumers’ decision when shopping online. As a result, an integrated consumer online shopping decision-making model is developed which contains three elements—Consumer, Product, and Web Site. This model proposed relative factors which influence the consumers’ intention during the online shopping progress, and divided them into two different dimensions—mentally level and material level. We tested those factors with surveys, from both online volunteers and offline paper surveys with more than 200 samples. With the help of SEM, the experimental results show that the proposed model and method can be used to analyze consumer’s online shopping decision-making process effectively.

Treatment of fevers prior to introducing rapid diagnostic tests for malaria in registered drug shops in Uganda.

PubMed

Mbonye, Anthony K; Lal, Sham; Cundill, Bonnie; Hansen, Kristian Schultz; Clarke, Siân; Magnussen, Pascal

2013-04-16

Since drug shops play an important role in treatment of fever, introducing rapid diagnostic tests (RDTs) for malaria at drug shops may have the potential of targeting anti-malarial drugs to those with malaria parasites and improve rational drug use. As part of a cluster randomized trial to examine impact on appropriate treatment of malaria in drug shops in Uganda and adherence to current malaria treatment policy guidelines, a survey was conducted to estimate baseline prevalence of, and factors associated with, appropriate treatment of malaria to enable effective design and implementation of the cluster randomized trial. A survey was conducted within 20 geographical clusters of drug shops from May to September 2010 in Mukono district, central Uganda. A cluster was defined as a parish representing a cluster of drug shops. Data was collected using two structured questionnaires: a provider questionnaire to capture data on drug shops (n=65) including provider characteristics, knowledge on treatment of malaria, previous training received, type of drugs stocked, reported drug sales, and record keeping practices; and a patient questionnaire to capture data from febrile patients (n=540) exiting drug shops on presenting symptoms, the consultation process, treatment received, and malaria diagnoses. Malaria diagnosis made by drug shop vendors were confirmed by the study team through microscopy examination of a blood slide to ascertain whether appropriate treatment was received. Among febrile patients seen at drug shops, 35% had a positive RDT result and 27% had a positive blood slide. Many patients (55%) had previously sought care from another drug shop prior to this consultation. Three quarters (73%) of all febrile patients seen at drug shops received an anti-malarial, of whom 39% received an ACT and 33% received quinine. The rest received another non-artemisinin monotherapy. Only one third (32%) of patients with a positive blood slide had received treatment with Coartem® while 34% of those with a negative blood slide had not received an anti-malarial. Overall appropriate treatment was 34 (95% CI: 28 - 40) with substantial between-cluster variation, ranging from 1% to 55%. In this setting, the proportion of malaria patients receiving appropriate ACT treatment at drug shops was low. This was due to the practice of presumptive treatment, inadequate training on malaria management and lack of knowledge that Coartem® was the recommended first-line treatment for malaria. There is urgent need for interventions to improve treatment of malaria at these outlets.

Treatment of fevers prior to introducing rapid diagnostic tests for malaria in registered drug shops in Uganda

PubMed Central

2013-01-01

Background Since drug shops play an important role in treatment of fever, introducing rapid diagnostic tests (RDTs) for malaria at drug shops may have the potential of targeting anti-malarial drugs to those with malaria parasites and improve rational drug use. As part of a cluster randomized trial to examine impact on appropriate treatment of malaria in drug shops in Uganda and adherence to current malaria treatment policy guidelines, a survey was conducted to estimate baseline prevalence of, and factors associated with, appropriate treatment of malaria to enable effective design and implementation of the cluster randomized trial. Methods A survey was conducted within 20 geographical clusters of drug shops from May to September 2010 in Mukono district, central Uganda. A cluster was defined as a parish representing a cluster of drug shops. Data was collected using two structured questionnaires: a provider questionnaire to capture data on drug shops (n=65) including provider characteristics, knowledge on treatment of malaria, previous training received, type of drugs stocked, reported drug sales, and record keeping practices; and a patient questionnaire to capture data from febrile patients (n=540) exiting drug shops on presenting symptoms, the consultation process, treatment received, and malaria diagnoses. Malaria diagnosis made by drug shop vendors were confirmed by the study team through microscopy examination of a blood slide to ascertain whether appropriate treatment was received. Results Among febrile patients seen at drug shops, 35% had a positive RDT result and 27% had a positive blood slide. Many patients (55%) had previously sought care from another drug shop prior to this consultation. Three quarters (73%) of all febrile patients seen at drug shops received an anti-malarial, of whom 39% received an ACT and 33% received quinine. The rest received another non-artemisinin monotherapy. Only one third (32%) of patients with a positive blood slide had received treatment with Coartem® while 34% of those with a negative blood slide had not received an anti-malarial. Overall appropriate treatment was 34 (95% CI: 28 – 40) with substantial between-cluster variation, ranging from 1% to 55%. Conclusion In this setting, the proportion of malaria patients receiving appropriate ACT treatment at drug shops was low. This was due to the practice of presumptive treatment, inadequate training on malaria management and lack of knowledge that Coartem® was the recommended first-line treatment for malaria. There is urgent need for interventions to improve treatment of malaria at these outlets. PMID:23587179

Introducing rapid diagnostic tests for malaria into registered drug shops in Uganda: lessons learned and policy implications.

PubMed

Mbonye, Anthony K; Clarke, Sîan E; Lal, Sham; Chandler, Clare I; Hutchinson, Eleanor; Hansen, Kristian S; Magnussen, Pascal

2015-11-14

Malaria is a major public health problem in Uganda and the current policy recommends introduction of rapid diagnostic tests for malaria (RDTs) to facilitate effective case management. However, provision of RDTs in drug shops potentially raises a new set of issues, such as adherence to RDTs results, management of severe illnesses, referral of patients, and relationship with caretakers. The main objective of the study was to examine the impact of introducing RDTs in registered drug shops in Uganda and document lessons and policy implications for future scale-up of malaria control in the private health sector. A cluster-randomized trial introducing RDTs into registered drug shops was implemented in central Uganda from October 2010 to July 2012. An evaluation was undertaken to assess the impact and the processes involved with the introduction of RDTs into drug shops, the lessons learned and policy implications. Introducing RDTs into drug shops was feasible. To scale-up this intervention however, drug shop practices need to be regulated since the registration process was not clear, supervision was inadequate and record keeping was poor. Although initially it was anticipated that introducing a new practice of record keeping would be cumbersome, but at evaluation this was not found to be a constraint. This presents an important lesson for introducing health management information system into drug shops. Involving stakeholders, especially the district health team, in the design was important for ownership and sustainability. The involvement of village health teams in community sensitization to the new malaria treatment and diagnosis policy was a success and this strategy is recommended for future interventions. Introducing RDTs into drug shops was feasible and it increased appropriate treatment of malaria with artemisinin-based combination therapy. It is anticipated that the lessons presented will help better implementation of similar interventions in the private sector.

Cat and dog sensitization in pet shop workers.

PubMed

Yilmaz, I; Oner Erkekol, F; Secil, D; Misirligil, Z; Mungan, D

2013-12-01

Sensitivity and symptoms related to animal proteins have been investigated in various occupational groups. However, data from pet shops are limited. To investigate rates of sensitivity to cats and dogs among pet shop workers, to assess the relationship between sensitivity, allergen levels and symptoms and to investigate whether passive transport from pet shops to homes is possible. Pet shop workers underwent interviews with a questionnaire adapted from the European Community Respiratory Health Survey. Dust samples for allergen detection were collected from pet shops using a vacuum cleaner. Skin tests were performed with common allergens. Dust samples were also obtained from the houses of 7 workers and 12 control subjects. Fifty-one workers from 20 pet shops were included in the study. Thirteen (25%) workers reported work-related symptoms. Four workers had sensitivity to animal allergens. The mean cat/dog allergen levels from pet shops were 15.7 and 3.2 µg/g, respectively. There was no significant relationship between cat/dog allergen levels and work-related symptoms and sensitivity to pets. None of the dust samples collected from the homes of pet shop workers contained cat allergens. Dog allergen was detected in only one house (0.58 µg/g). Neither cat nor dog allergens were found in the homes of the 12 control subjects. Although a quarter of pet shop workers reported work-related symptoms, sensitivity to cat and dog was low. These findings suggest that work-related symptoms may be due to other factors than cat and dog sensitivity.

Increased access to care and appropriateness of treatment at private sector drug shops with integrated management of malaria, pneumonia and diarrhoea: a quasi-experimental study in Uganda.

PubMed

Awor, Phyllis; Wamani, Henry; Tylleskar, Thorkild; Jagoe, George; Peterson, Stefan

2014-01-01

Drug shops are a major source of care for children in low income countries but they provide sub-standard care. We assessed the feasibility and effect on quality of care of introducing diagnostics and pre-packaged paediatric-dosage drugs for malaria, pneumonia and diarrhoea at drug shops in Uganda. We adopted and implemented the integrated community case management (iCCM) intervention within registered drug shops. Attendants were trained to perform malaria rapid diagnostic tests (RDTs) in each fever case and count respiratory rate in each case of cough with fast/difficult breathing, before dispensing recommended treatment. Using a quasi-experimental design in one intervention and one non-intervention district, we conducted before and after exit interviews for drug seller practices and household surveys for treatment-seeking practices in May-June 2011 and May-June 2012. Survey adjusted generalized linear models and difference-in-difference analysis was used. 3759 (1604 before/2155 after) household interviews and 943 (163 before/780 after) exit interviews were conducted with caretakers of children under-5. At baseline, no child at a drug shop received any diagnostic testing before treatment in both districts. After the intervention, while no child in the non-intervention district received a diagnostic test, 87.7% (95% CI 79.0-96.4) of children with fever at the intervention district drug shops had a parasitological diagnosis of malaria, prior to treatment. The prevalence ratios of the effect of the intervention on treatment of cough and fast breathing with amoxicillin and diarrhoea with ORS/zinc at the drug shop were 2.8 (2.0-3.9), and 12.8 (4.2-38.6) respectively. From the household survey, the prevalence ratio of the intervention effect on use of RDTs was 3.2 (1.9-5.4); Artemisinin Combination Therapy for malaria was 0.74 (0.65-0.84), and ORS/zinc for diarrhoea was 2.3 (1.2-4.7). iCCM can be utilized to improve access and appropriateness of care for children at drug shops.

Opticalman 1 and C, Rate Training Manual.

ERIC Educational Resources Information Center

Naval Personnel Program Support Activity, Washington, DC.

The technical subject matter of this rate training manual is written for regular navy and naval reserve personnel. Responsibilities for optical shop administration, supervision, and training are discussed in detail. Metals are studied in connection with heat treating processes. Characteristics of light are analyzed to familiarize students with…

Corner Store Purchases in a Low-Income Urban Community in NYC.

PubMed

Kiszko, Kamila; Cantor, Jonathan; Abrams, Courtney; Ruddock, Charmaine; Moltzen, Kelly; Devia, Carlos; McFarline, Bernice; Singh, Hardeep; Elbel, Brian

2015-12-01

We assessed purchases made, motivations for shopping, and frequency of shopping at four New York City corner stores (bodegas). Surveys and purchase inventories (n = 779) were collected from consumers at four bodegas in Bronx, NY. We use Chi square tests to compare types of consumers, items purchased and characteristics of purchases based on how frequently the consumer shops at the specific store and the time of day the purchase was made. Most consumers shopped at the bodega because it was close to their home (52 %). The majority (68 %) reported shopping at the bodega at least once per day. The five most commonly purchased items were sugary beverages, (29.27 %), sugary snacks (22.34 %), coffee, (13.99 %), sandwiches, (13.09 %) and non-baked potato chips (12.2 %). Nearly 60 % of bodega customers reported their purchase to be healthy. Most of the participants shopped at the bodega frequently, valued its convenient location, and purchased unhealthy items. Work is needed to discover ways to encourage healthier choices at these stores.

A signal detection approach to patient-doctor communication and doctor-shopping behaviour among Japanese patients.

PubMed

Hagihara, Akihito; Tarumi, Kimio; Odamaki, Misato; Nobutomo, Koichi

2005-12-01

As one of the factors related to doctor-shopping behaviour (i.e. consulting multiple doctors with regard to the same illness episode), very little has been revealed about the role of doctor explanation. We examined therefore the association between doctor explanation and doctor-shopping behaviour. The subjects were internist-patient pairs in Japan. Signal detection analysis (SDA) was used for the data analysis. Of the 303 patients, 84 patients engaged in doctor shopping (27.7%). The following results were obtained: (1) of the 19 relevant variables, the 'level of doctor explanation: treatment' was the most significant predictor of doctor-shopping behaviour (P < 0.01), and (2) with regard to their subjective evaluations of the sufficiency of their explanations about treatment or testing, the evaluations of the doctors, rather than those of the patient, were significant predictors of doctor-shopping behaviour. These results imply the following: (1) a patient's inability to understand a doctor's explanation about treatment, which results from a large gap between the perceptions of the patient and those of the doctor, is the most significant predictor of doctor-shopping behaviour, and (2) in the context of favourable patient-doctor interactions, when doctors feel their explanations are insufficient, they may be able to prevent doctor-shopping behaviour by providing relatively thorough explanations about treatment.

'It puts life in us and we feel big': shifts in the local health care system during the introduction of rapid diagnostic tests for malaria into drug shops in Uganda.

PubMed

Hutchinson, Eleanor; Chandler, Clare; Clarke, Siân; Lal, Sham; Magnussen, Pascal; Kayendeke, Miriam; Nabirye, Christine; Kizito, James; Mbonye, Anthony

2015-01-01

This paper is an analysis of the social interaction between drug sellers, their clients and local health care workers within a medical trial that introduced rapid diagnostic tests for malaria into private sector drug shops in Mukono District, Uganda. It locates the introduction of a new technology to test blood and a system of referral within the context of local concerns about the choice and evaluation of treatment; and the socially legitimated statuses, roles and hierarchies within the local health care system. Based on the multi-layered interpretation of 21 focus group discussions, we describe three key aspects of the trial central to local interpretation: openly testing blood, supervisory visits to drug shops and a new referral form. Each had the potential to shift drug shop vendors from outsider to insider of the formal health service. The responses of the different groups of participants reflect their situation within the health care system. The clients and patients welcomed the local availability of new diagnostic technology and the apparent involvement of the government in securing good quality health services for them from providers with often uncertain credentials. The drug shop vendors welcomed the authorization to openly test blood, enabling the demonstration of a new skill and newfound legitimacy as a health worker rather than simple drug seller. Formal sector health workers were less enthusiastic about the trial, raising concerns about professional hierarchies and the maintenance of a boundary around the formal health service to ensure the exclusion of those they considered untrained, unprofessional and untrustworthy personnel.

‘It puts life in us and we feel big’: shifts in the local health care system during the introduction of rapid diagnostic tests for malaria into drug shops in Uganda

PubMed Central

Hutchinson, Eleanor; Chandler, Clare; Clarke, Siân; Lal, Sham; Magnussen, Pascal; Kayendeke, Miriam; Nabirye, Christine; Kizito, James; Mbonye, Anthony

2015-01-01

This paper is an analysis of the social interaction between drug sellers, their clients and local health care workers within a medical trial that introduced rapid diagnostic tests for malaria into private sector drug shops in Mukono District, Uganda. It locates the introduction of a new technology to test blood and a system of referral within the context of local concerns about the choice and evaluation of treatment; and the socially legitimated statuses, roles and hierarchies within the local health care system. Based on the multi-layered interpretation of 21 focus group discussions, we describe three key aspects of the trial central to local interpretation: openly testing blood, supervisory visits to drug shops and a new referral form. Each had the potential to shift drug shop vendors from outsider to insider of the formal health service. The responses of the different groups of participants reflect their situation within the health care system. The clients and patients welcomed the local availability of new diagnostic technology and the apparent involvement of the government in securing good quality health services for them from providers with often uncertain credentials. The drug shop vendors welcomed the authorization to openly test blood, enabling the demonstration of a new skill and newfound legitimacy as a health worker rather than simple drug seller. Formal sector health workers were less enthusiastic about the trial, raising concerns about professional hierarchies and the maintenance of a boundary around the formal health service to ensure the exclusion of those they considered untrained, unprofessional and untrustworthy personnel. PMID:25632175

Model-based phase-shifting interferometer

NASA Astrophysics Data System (ADS)

Liu, Dong; Zhang, Lei; Shi, Tu; Yang, Yongying; Chong, Shiyao; Miao, Liang; Huang, Wei; Shen, Yibing; Bai, Jian

2015-10-01

A model-based phase-shifting interferometer (MPI) is developed, in which a novel calculation technique is proposed instead of the traditional complicated system structure, to achieve versatile, high precision and quantitative surface tests. In the MPI, the partial null lens (PNL) is employed to implement the non-null test. With some alternative PNLs, similar as the transmission spheres in ZYGO interferometers, the MPI provides a flexible test for general spherical and aspherical surfaces. Based on modern computer modeling technique, a reverse iterative optimizing construction (ROR) method is employed for the retrace error correction of non-null test, as well as figure error reconstruction. A self-compiled ray-tracing program is set up for the accurate system modeling and reverse ray tracing. The surface figure error then can be easily extracted from the wavefront data in forms of Zernike polynomials by the ROR method. Experiments of the spherical and aspherical tests are presented to validate the flexibility and accuracy. The test results are compared with those of Zygo interferometer (null tests), which demonstrates the high accuracy of the MPI. With such accuracy and flexibility, the MPI would possess large potential in modern optical shop testing.

A pilot evaluation of a computer-based psychometric test battery designed to detect impairment in patients with cirrhosis.

PubMed

Cook, Nicola A; Kim, Jin Un; Pasha, Yasmin; Crossey, Mary Me; Schembri, Adrian J; Harel, Brian T; Kimhofer, Torben; Taylor-Robinson, Simon D

2017-01-01

Psychometric testing is used to identify patients with cirrhosis who have developed hepatic encephalopathy (HE). Most batteries consist of a series of paper-and-pencil tests, which are cumbersome for most clinicians. A modern, easy-to-use, computer-based battery would be a helpful clinical tool, given that in its minimal form, HE has an impact on both patients' quality of life and the ability to drive and operate machinery (with societal consequences). We compared the Cogstate™ computer battery testing with the Psychometric Hepatic Encephalopathy Score (PHES) tests, with a view to simplify the diagnosis. This was a prospective study of 27 patients with histologically proven cirrhosis. An analysis of psychometric testing was performed using accuracy of task performance and speed of completion as primary variables to create a correlation matrix. A stepwise linear regression analysis was performed with backward elimination, using analysis of variance. Strong correlations were found between the international shopping list, international shopping list delayed recall of Cogstate and the PHES digit symbol test. The Shopping List Tasks were the only tasks that consistently had P values of <0.05 in the linear regression analysis. Subtests of the Cogstate battery correlated very strongly with the digit symbol component of PHES in discriminating severity of HE. These findings would indicate that components of the current PHES battery with the international shopping list tasks of Cogstate would be discriminant and have the potential to be used easily in clinical practice.

Determination of VOC emission rates and compositions for offset printing.

PubMed

Wadden, R A; Scheff, P A; Franke, J E; Conroy, L M; Keil, C B

1995-07-01

The release rates of volatile organic compounds (VOC) as fugitive emissions from offset printing are difficult to quantify, and the compositions are usually not known. Tests were conducted at three offset printing shops that varied in size and by process. In each case, the building shell served as the test "enclosure," and air flow and concentration measurements were made at each air entry and exit point. Emission rates and VOC composition were determined during production for (1) a small shop containing three sheetfed presses and two spirit duplicators (36,700 sheets, 47,240 envelopes and letterheads), (2) a medium-size industrial in-house shop with two webfed and three sheetfed presses, and one spirit duplicator (315,130 total sheets), and (3) one print room of a large commercial concern containing three webfed, heatset operations (1.16 x 10(6) ft) served by catalytic air pollution control devices. Each test consisted of 12 one-hour periods over two days. Air samples were collected simultaneously during each period at 7-14 specified locations within each space. The samples were analyzed by gas chromatography (GC) for total VOC and for 13-19 individual organics. Samples of solvents used at each shop were also analyzed by GC. Average VOC emission rates were 4.7-6.1 kg/day for the small sheetfed printing shop, 0.4-0.9 kg/day for the industrial shop, and 79-82 kg/day for the commercial print room. Emission compositions were similar and included benzene, toluene, xylenes, ethylbenzene, and hexane. Comparison of the emission rates with mass balance estimates based on solvent usage and composition were quite consistent.(ABSTRACT TRUNCATED AT 250 WORDS)

A comparison of selected public health criteria in milk from milk-shops and from a national distributor.

PubMed

O'Ferrall-Berndt, M More

2003-06-01

Selected public health criteria of pasteurised milk available to the consumer from milk-shops in a pre-defined area of Pretoria compared with a national distributor's milk was evaluated. Of the 135 milk samples purchased from milk-shops, 87% were not fit for human consumption on the basis of the minimum standards prescribed in the Foodstuffs, Cosmetics and Disinfectants Act, 1972 (Act 54 of1972). The national distributor's milk (n = 79) did not contain any pathogens, toxins nor inhibitory substances and passed all the criteria laid down in the Act. Even though milk-shop milk was sold as having been pasteurised, 38.5% of samples were alkaline phosphatase positive, indicating probable inadequate pasteurisation. Milk-shop milk quality varied between milk-shops and between sampling days and differed significantly (P < 0.05) from the national distributor's milk. Total aerobic plate and coliform counts were generally high for all milk-shop milk samples. Somatic cell counts of milk-shop milk differed significantly (P < 0.05) from the national distributor's milk. Escherichia coli was detected in 1 ml of 17% of milk-shop milk, 95% of which originated from milk which was alkaline phosphatase positive. Salmonella spp. could not be detected in 1 ml in any of the E. coli-positive milk tested. Staphylococcus aureus was isolated from 40% of milk-shop milk samples, and S. aureus enterotoxins from 7.8% of 51 cultures. Inhibitory substances were detected in 54.1% of milk-shop milk. The presence of inhibitory substances and the isolation of E. coli and S. aureus (some of which were able to produce enterotoxins) indicated potentially unsafe milk and poses a serious public health risk to consumers.

Verification Tools Secure Online Shopping, Banking

NASA Technical Reports Server (NTRS)

2010-01-01

Just like rover or rocket technology sent into space, the software that controls these technologies must be extensively tested to ensure reliability and effectiveness. Ames Research Center invented the open-source Java Pathfinder (JPF) toolset for the deep testing of Java-based programs. Fujitsu Labs of America Inc., based in Sunnyvale, California, improved the capabilities of the JPF Symbolic Pathfinder tool, establishing the tool as a means of thoroughly testing the functionality and security of Web-based Java applications such as those used for Internet shopping and banking.

A&M. TAN607. Shield wall sections and details around hot shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Shield wall sections and details around hot shop and special equipment room, showing taper, crane rail elevations, and elevation for biparting door (door no. 301) in wall between hot shop and special equipment room. Ralph M. Parsons 902-3-ANP-607-S 138. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-62-963-106782 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A&M. TAN607. Interior view of operating gallery in hot shop. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Interior view of operating gallery in hot shop. Shielded viewing windows are along right side of corridor. Cabinet on wheels at left of corridor is operating console for hot shop manipulators. When in use, it is stationed at window station and connected to appropriate control cables. note reserve bottles of zinc bromide above each station. Date: January 3, 1955. INEEL negative no. 55-0072 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Wavefront Analysis of Adaptive Telescope

NASA Technical Reports Server (NTRS)

Hadaway, James B.; Hillman, Lloyd

1997-01-01

The motivation for this work came from a NASA Headquarters interest in investigating design concepts for a large space telescope employing active optics technology. Current and foreseeable launch vehicles will be limited to carrying around 4-5 meter diameter objects. Thus, if a large, filled-aperture telescope (6-20 meters in diameter) is to be placed in space, it will be required to have a deployable primary mirror. Such a mirror may be an inflatable membrane or a segmented mirror consisting of many smaller pieces. In any case, it is expected that the deployed primary will not be of sufficient quality to achieve diffraction-limited performance for its aperture size. Thus, an active optics system will be needed to correct for initial as well as environmentally-produced primary figure errors. Marshall Space Flight Center has developed considerable expertise in the area of active optics with the PAMELA test-bed. The combination of this experience along with the Marshall optical shop's work in mirror fabrication made MSFC the logical choice to lead NASA's effort to develop active optics technology for large, space-based, astronomical telescopes. Furthermore, UAH's support of MSFC in the areas of optical design, fabrication, and testing of space-based optical systems placed us in a key position to play a major role in the development of this future-generation telescope. A careful study of the active optics components had to be carried out in order to determine control segment size, segment quality, and segment controllability required to achieve diffraction-limited resolution with a given primary mirror. With this in mind, UAH undertook the following effort to provide NASA/MSFC with optical design and analysis support for the large telescope study. All of the work performed under this contract has already been reported, as a team member with MSFC, to NASA Headquarters in a series of presentations given between May and December of 1995. As specified on the delivery order, this report simply summarizes the material with the various UAH-written presentation packages attached as appendices.

Investigation of Zerodur material processing

NASA Technical Reports Server (NTRS)

Johnson, R. Barry

1993-01-01

The Final Report of the Center for Applied Optics (CAO), of The University of Alabama (UAH) study entitled 'Investigation of Zerodur Material Processing' is presented. The objectives of the effort were to prepare glass samples by cutting, grinding, etching, and polishing block Zerodur to desired specifications using equipment located in the optical shop located in the Optical System Branch at NASA/MSFC; characterize samples for subsurface damage and surface roughness; utilize Zerodur samples for coating investigations; and perform investigations into enhanced optical fabrication and metrology techniques. The results of this investigation will be used to support the Advanced X Ray Astrophysics Facility (AXAF) program as well as other NASA/MSFC research programs. The results of the technical effort are presented and discussed.

Action Memorandum for Decommissioning of TAN-607 Hot Shop Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. A. Pinzel

The Department of Energy is documenting the selection of an alternative for the TAN-607 Hot Shop Area using a Comprehensive Environmental Response, Compensation, and Liability Act non-time-critical removal action (NTCRA). The scope of the removal action is limited to TAN-607 Hot Shop Area. An engineering evaluation/cost analysis (EE/CA) has assisted the Department of Energy Idaho Operations Office in identifuomg the most effective method for performing the decommissioning of this structure whose mission has ended. TAN-607 Hot Shop Area is located at Test Area North Technical Support Facility within the Idaho National Laboratory Site. The selected alternative consists of demolishing themore » TAN-607 aboveground structures and components, removing belowground noninert components (e.g. wood products), and removing the radiologically contaminated debris that does not meet remedial action objectives (RAOs), as defined in the Record of Decision Amendment for the V-Tanks and Explanation of Significant Differences for the PM-2A Tanks at Test Area North, Operable Unit 1-10.« less

Batch Scheduling for Hybrid Assembly Differentiation Flow Shop to Minimize Total Actual Flow Time

NASA Astrophysics Data System (ADS)

Maulidya, R.; Suprayogi; Wangsaputra, R.; Halim, A. H.

2018-03-01

A hybrid assembly differentiation flow shop is a three-stage flow shop consisting of Machining, Assembly and Differentiation Stages and producing different types of products. In the machining stage, parts are processed in batches on different (unrelated) machines. In the assembly stage, each part of the different parts is assembled into an assembly product. Finally, the assembled products will further be processed into different types of final products in the differentiation stage. In this paper, we develop a batch scheduling model for a hybrid assembly differentiation flow shop to minimize the total actual flow time defined as the total times part spent in the shop floor from the arrival times until its due date. We also proposed a heuristic algorithm for solving the problems. The proposed algorithm is tested using a set of hypothetic data. The solution shows that the algorithm can solve the problems effectively.

Astronomy in my shopping cart: Today I bought some asteroids, hundreds of black holes and three Solar Systems!

NASA Astrophysics Data System (ADS)

Boccato, C.; Lazzaretto, E.

2008-06-01

Here we will present a pilot project that will be tested and developed throughout 2007/08 in advance of the International Year of Astronomy. Why "putting astronomy in the shopping cart"? The aim of the project is to publicise astrophysics at a popular level, choosing a place that best matches the meaning of the word `popular': the shopping mall. With this project we want to arouse consumer interest in science, making use of the supermarket inside any shopping mall: a place people are familiar with and where they find common consumer goods. The final purpose is to give our science consumer the chance to bring home shopping bags filled not only with consumer goods, but also with a piece of knowledge about astronomy, astrophysics and the way astronomers work and think to understand the Universe and its phenomena.

Resource Conservation and Recovery Act closure report: Area 2 Bitcutter and Postshot Containment Shops Injection Wells, Correction Action Unit 90

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This Closure Report provides documentation of the activities conducted during the Resource Conservation and Recovery Act (RCRA) closure of the Bitcutter and Postshot Containment Shops Injection Wells located in Area 2 of the Nevada Test Site (NTS), Oak Spring Quadrangle (USGS, 1986), Township 10 South, Range 53 East, Nye County, Nevada. This report discusses the Bitcutter Shop Inside Injection Well (CAU 90-A) closure-in-place and the Bitcutter Shop Outside Injection Well (CAU 90-B) and Postshot Containment Shop Injection Well (CAU 90-C) clean closures. This Closure Report provides background information about the unit, the results of the characterization activities and actions conductedmore » to determine the closure design. It also provides a discussion of the drainage analysis, preliminary closure activities, final closure activities, waste management activities, and the Post-Closure Care requirements.« less

Development of TIF based figuring algorithm for deterministic pitch tool polishing

NASA Astrophysics Data System (ADS)

Yi, Hyun-Su; Kim, Sug-Whan; Yang, Ho-Soon; Lee, Yun-Woo

2007-12-01

Pitch is perhaps the oldest material used for optical polishing, leaving superior surface texture, and has been used widely in the optics shop floor. However, for its unpredictable controllability of removal characteristics, the pitch tool polishing has been rarely analysed quantitatively and many optics shops rely heavily on optician's "feel" even today. In order to bring a degree of process controllability to the pitch tool polishing, we added motorized tool motions to the conventional Draper type polishing machine and modelled the tool path in the absolute machine coordinate. We then produced a number of Tool Influence Function (TIF) both from an analytical model and a series of experimental polishing runs using the pitch tool. The theoretical TIFs agreed well with the experimental TIFs to the profile accuracy of 79 % in terms of its shape. The surface figuring algorithm was then developed in-house utilizing both theoretical and experimental TIFs. We are currently undertaking a series of trial figuring experiments to prove the performance of the polishing algorithm, and the early results indicate that the highly deterministic material removal control with the pitch tool can be achieved to a certain level of form error. The machine renovation, TIF theory and experimental confirmation, figuring simulation results are reported together with implications to deterministic polishing.

Willingness-to-pay for a rapid malaria diagnostic test and artemisinin-based combination therapy from private drug shops in Mukono district, Uganda

PubMed Central

Hansen, Kristian Schultz; Pedrazzoli, Debora; Mbonye, Anthony; Clarke, Sian; Cundill, Bonnie; Magnussen, Pascal; Yeung, Shunmay

2013-01-01

In Uganda, as in many parts of Africa, the majority of the population seek treatment for malaria in drug shops as their first point of care; however, parasitological diagnosis is not usually offered in these outlets. Rapid diagnostic tests (RDTs) for malaria have attracted interest in recent years as a tool to improve malaria diagnosis, since they have proved accurate and easy to perform with minimal training. Although RDTs could feasibly be performed by drug shop vendors, it is not known how much customers would be willing to pay for an RDT if offered in these settings. We conducted a contingent valuation survey among drug shop customers in Mukono District, Uganda. Exit interviews were undertaken with customers aged 15 years and above after leaving a drug shop having purchased an antimalarial and/or paracetamol. The bidding game technique was used to elicit the willingness-to-pay (WTP) for an RDT and a course of artemisinin-based combination therapy (ACT) with and without RDT confirmation. Factors associated with WTP were investigated using linear regression. The geometric mean WTP for an RDT was US$0.53, US$1.82 for a course of ACT and US$2.05 for a course of ACT after a positive RDT. Factors strongly associated with a higher WTP for these commodities included having a higher socio-economic status, no fever/malaria in the household in the past 2 weeks and if a malaria diagnosis had been obtained from a qualified health worker prior to visiting the drug shop. The findings further suggest that the WTP for an RDT and a course of ACT among drug shop customers is considerably lower than prevailing and estimated end-user prices for these commodities. Increasing the uptake of ACTs in drug shops and restricting the sale of ACTs to parasitologically confirmed malaria will therefore require additional measures. PMID:22589226

Willingness-to-pay for a rapid malaria diagnostic test and artemisinin-based combination therapy from private drug shops in Mukono District, Uganda.

PubMed

Hansen, Kristian Schultz; Pedrazzoli, Debora; Mbonye, Anthony; Clarke, Sian; Cundill, Bonnie; Magnussen, Pascal; Yeung, Shunmay

2013-03-01

In Uganda, as in many parts of Africa, the majority of the population seek treatment for malaria in drug shops as their first point of care; however, parasitological diagnosis is not usually offered in these outlets. Rapid diagnostic tests (RDTs) for malaria have attracted interest in recent years as a tool to improve malaria diagnosis, since they have proved accurate and easy to perform with minimal training. Although RDTs could feasibly be performed by drug shop vendors, it is not known how much customers would be willing to pay for an RDT if offered in these settings. We conducted a contingent valuation survey among drug shop customers in Mukono District, Uganda. Exit interviews were undertaken with customers aged 15 years and above after leaving a drug shop having purchased an antimalarial and/or paracetamol. The bidding game technique was used to elicit the willingness-to-pay (WTP) for an RDT and a course of artemisinin-based combination therapy (ACT) with and without RDT confirmation. Factors associated with WTP were investigated using linear regression. The geometric mean WTP for an RDT was US$0.53, US$1.82 for a course of ACT and US$2.05 for a course of ACT after a positive RDT. Factors strongly associated with a higher WTP for these commodities included having a higher socio-economic status, no fever/malaria in the household in the past 2 weeks and if a malaria diagnosis had been obtained from a qualified health worker prior to visiting the drug shop. The findings further suggest that the WTP for an RDT and a course of ACT among drug shop customers is considerably lower than prevailing and estimated end-user prices for these commodities. Increasing the uptake of ACTs in drug shops and restricting the sale of ACTs to parasitologically confirmed malaria will therefore require additional measures.

Comparison of performance-based assessment and real world skill in people with serious mental illness: Ecological validity of the Test of Grocery Shopping Skills.

PubMed

Faith, Laura A; Rempfer, Melisa V

2018-05-07

Valid functional measures are essential for clinical and research efforts that address recovery and community functioning in people with serious mental illness. Although there is a great deal of interest in functional assessment, there is limited research supporting how well current evaluation methods provide a true assessment of real world functioning or naturalistic behavior. To address this gap in the literature, the present study examined the performance of individuals with serious mental illness (i.e., diagnosis of schizophrenia-spectrum, bipolar disorder, or other depression/anxiety diagnoses and accompanying functional disability) on the Test of Grocery Shopping Skills (TOGSS), a performance-based naturalistic task. We compared TOGSS performance to two dimensions of real world functioning: directly observed real world grocery shopping and ratings of community functioning. Results indicated that the TOGSS was significantly associated with real life grocery shopping, in terms of both shopping accuracy (r = 0.424) and time (r = 0.491). Further, self-report and observer-rated methods of assessing real world shopping behaviors were significantly correlated (r = 0.455). To our knowledge, this is one of the first studies to directly compare a performance-based naturalistic skill assessment with carefully observed real world performance of that skill in people with serious mental illness. These findings support the feasibility and ecological validity of performance-based naturalistic assessment with the TOGSS. Copyright © 2018 Elsevier B.V. All rights reserved.

Credit USAF. Original housed in the Muroc Flight Test Base, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Credit USAF. Original housed in the Muroc Flight Test Base, Unit History, 1 September 1942 - 30 June 1945. Alfred F. Simpson Historical Research Agency. United States Air Force. Maxwell AFB, Alabama. View captioned as "7 Sept 1945, BH-5 Base Ordinance Motor Repair Shop" with gas station and gasoline pump. View looks roughly northwest - Edwards Air Force Base, North Base, Motor Repair Shop T-16, Third & C Streets, Boron, Kern County, CA

Drilling Machines: Vocational Machine Shop.

ERIC Educational Resources Information Center

Thomas, John C.

The lessons and supportive information in this field tested instructional block provide a guide for teachers in developing a machine shop course of study in drilling. The document is comprised of operation sheets, information sheets, and transparency masters for 23 lessons. Each lesson plan includes a performance objective, material and tools,…

Diesel Fundamentals. Teacher Edition (Revised).

ERIC Educational Resources Information Center

Clark, Elton; And Others

This module is one of a series of teaching guides that cover diesel mechanics. The module contains 4 sections and 19 units. Section A--Orientation includes the following units: introduction to diesel mechanics and shop safety; basic shop tools; test equipment and service tools; fasteners; bearings; and seals. Section B--Engine Principles and…

VIEW OF TANK (BLDG. 1929) AND GARAGE (BLDG. 1930). SHOP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF TANK (BLDG. 1929) AND GARAGE (BLDG. 1930). SHOP (BUILDING 1928) IS THE LARGER STRUCTURE IN THE BACKGROUND. Looking southeast - Edwards Air Force Base, X-15 Engine Test Complex, Tank & Garage, Rogers Dry Lake, east of Runway between North Base & South Base, Boron, Kern County, CA

Evaluation of Career Education Projects, 1976-1977. Report #7829.

ERIC Educational Resources Information Center

Chern, Hermine J.; And Others

Evaluations of thirty career education projects in the school district of Philadelphia, Pennsylvania are contained in this report. Fifteen of the projects concern classroom or shop instruction, six concern development and/or field testing of curriculum materials, and the remainder involve staff development, installation of shop equipment, job…

KSC-2010-5293

NASA Image and Video Library

2010-10-21

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, testing of the Tilt-Up Umbilical Arm (TUUA) prototype's Environmental Control System Quick Disconnect takes place in the Launch Equipment Test Facility's 6,000-square-foot high bay. The prototype is used to demonstrate the safe disconnect and retraction of ground umbilical plates and associated hardware of a launch vehicle's upper stage and service module. The Environmental Control System consists of regulated air, which would be used to purge an inner tank and crew module. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. The facility recently underwent a major upgrade to support even more programs, projects and customers. It houses a cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator, 600-ton test fixture, launch simulation towers and a cryogenic system. Photo credit: NASA/Jack Pfaller

KSC-2010-5290

NASA Image and Video Library

2010-10-21

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, testing of the Tilt-Up Umbilical Arm (TUUA) prototype's Environmental Control System Quick Disconnect takes place in the Launch Equipment Test Facility's 6,000-square-foot high bay. The prototype is used to demonstrate the safe disconnect and retraction of ground umbilical plates and associated hardware of a launch vehicle's upper stage and service module. The Environmental Control System consists of regulated air, which would be used to purge an inner tank and crew module. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. The facility recently underwent a major upgrade to support even more programs, projects and customers. It houses a cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator, 600-ton test fixture, launch simulation towers and a cryogenic system. Photo credit: NASA/Jack Pfaller

KSC-2010-5292

NASA Image and Video Library

2010-10-21

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, testing of the Tilt-Up Umbilical Arm (TUUA) prototype's Environmental Control System Quick Disconnect takes place in the Launch Equipment Test Facility's 6,000-square-foot high bay. The prototype is used to demonstrate the safe disconnect and retraction of ground umbilical plates and associated hardware of a launch vehicle's upper stage and service module. The Environmental Control System consists of regulated air, which would be used to purge an inner tank and crew module. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. The facility recently underwent a major upgrade to support even more programs, projects and customers. It houses a cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator, 600-ton test fixture, launch simulation towers and a cryogenic system. Photo credit: NASA/Jack Pfaller

KSC-2010-5291

NASA Image and Video Library

2010-10-21

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, testing of the Tilt-Up Umbilical Arm (TUUA) prototype's Environmental Control System Quick Disconnect takes place in the Launch Equipment Test Facility's 6,000-square-foot high bay. The prototype is used to demonstrate the safe disconnect and retraction of ground umbilical plates and associated hardware of a launch vehicle's upper stage and service module. The Environmental Control System consists of regulated air, which would be used to purge an inner tank and crew module. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. The facility recently underwent a major upgrade to support even more programs, projects and customers. It houses a cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator, 600-ton test fixture, launch simulation towers and a cryogenic system. Photo credit: NASA/Jack Pfaller

Rainbow holography and its applications

NASA Astrophysics Data System (ADS)

Vlasov, N. G.; Ivanov, Vladimir S.

1993-09-01

The general equations of the rainbow holography are deduced. Their analysis makes it possible to offer different methods of the rainbow holographic images production. A new way of using the rainbow holograms as optical elements for effective color illuminating of transparent, specular, and polished objects is proposed. Application fields are the advertising industry, shop windows design, etc.

Achieving Last-Mile Broadband Access With Passive Optical Networking Technology

DTIC Science & Technology

2002-09-01

Naval Postgraduate School Monterey, CA 93943-5000 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING / MONITORING ...AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSORING/ MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY NOTES The views expressed in...definition television (HDTV), video telecommuting , tele- education, video-on-demand, online video games, interactive shopping and yet to

A pilot evaluation of a computer-based psychometric test battery designed to detect impairment in patients with cirrhosis

PubMed Central

Cook, Nicola A; Kim, Jin Un; Pasha, Yasmin; Crossey, Mary ME; Schembri, Adrian J; Harel, Brian T; Kimhofer, Torben; Taylor-Robinson, Simon D

2017-01-01

Background Psychometric testing is used to identify patients with cirrhosis who have developed hepatic encephalopathy (HE). Most batteries consist of a series of paper-and-pencil tests, which are cumbersome for most clinicians. A modern, easy-to-use, computer-based battery would be a helpful clinical tool, given that in its minimal form, HE has an impact on both patients’ quality of life and the ability to drive and operate machinery (with societal consequences). Aim We compared the Cogstate™ computer battery testing with the Psychometric Hepatic Encephalopathy Score (PHES) tests, with a view to simplify the diagnosis. Methods This was a prospective study of 27 patients with histologically proven cirrhosis. An analysis of psychometric testing was performed using accuracy of task performance and speed of completion as primary variables to create a correlation matrix. A stepwise linear regression analysis was performed with backward elimination, using analysis of variance. Results Strong correlations were found between the international shopping list, international shopping list delayed recall of Cogstate and the PHES digit symbol test. The Shopping List Tasks were the only tasks that consistently had P values of <0.05 in the linear regression analysis. Conclusion Subtests of the Cogstate battery correlated very strongly with the digit symbol component of PHES in discriminating severity of HE. These findings would indicate that components of the current PHES battery with the international shopping list tasks of Cogstate would be discriminant and have the potential to be used easily in clinical practice. PMID:28919805

Molecular prevalence of Cryptosporidium species among household cats and pet shop kittens in Japan.

PubMed

Ito, Yoichi; Itoh, Naoyuki; Iijima, Yuko; Kimura, Yuya

2017-01-01

To address the lack of up-to-date published data, the present study evaluates the PCR-based prevalence of Cryptosporidium species infection and molecular characteristics of isolates among household cats and pet shop kittens in Japan. A total of 357 and 329 fresh faecal samples were collected from household cats and pet shop kittens, respectively, with or without clinical signs of infection. A nested PCR assay targeting the 18S rRNA gene was employed for the detection of Cryptosporidium species. After specific DNA fragments (approximately 826 base pairs) were confirmed, the amplicons were sequenced to determine species. Seven (2.0%) household cats and one (0.3%) pet shop kitten tested positive for the presence of Cryptosporidium species. In household cats, there was a significant difference in prevalence between cats aged <1 year (4.6%) and those aged ⩾1 year (0.4%). No significantly different prevalence was observed with regard to faecal condition in either household cats or pet shop kittens. A total of eight Cryptosporidium species isolates, seven from household cats and one from a pet shop kitten, were identified as Cryptosporidium felis . The present study demonstrates the risk of zoonotic transmission of Cryptosporidium species from household cats and pet shop kittens to humans is low in Japan.

Cue reactivity towards shopping cues in female participants.

PubMed

Starcke, Katrin; Schlereth, Berenike; Domass, Debora; Schöler, Tobias; Brand, Matthias

2013-03-01

Background and aims It is currently under debate whether pathological buying can be considered as a behavioural addiction. Addictions have often been investigated with cue-reactivity paradigms to assess subjective, physiological and neural craving reactions. The current study aims at testing whether cue reactivity towards shopping cues is related to pathological buying tendencies. Methods A sample of 66 non-clinical female participants rated shopping related pictures concerning valence, arousal, and subjective craving. In a subgroup of 26 participants, electrodermal reactions towards those pictures were additionally assessed. Furthermore, all participants were screened concerning pathological buying tendencies and baseline craving for shopping. Results Results indicate a relationship between the subjective ratings of the shopping cues and pathological buying tendencies, even if baseline craving for shopping was controlled for. Electrodermal reactions were partly related to the subjective ratings of the cues. Conclusions Cue reactivity may be a potential correlate of pathological buying tendencies. Thus, pathological buying may be accompanied by craving reactions towards shopping cues. Results support the assumption that pathological buying can be considered as a behavioural addiction. From a methodological point of view, results support the view that the cue-reactivity paradigm is suited for the investigation of craving reactions in pathological buying and future studies should implement this paradigm in clinical samples.

Towards an understanding of Internet-based problem shopping behaviour: The concept of online shopping addiction and its proposed predictors

PubMed Central

ROSE, SUSAN; DHANDAYUDHAM, ARUN

2014-01-01

Background: Compulsive and addictive forms of consumption and buying behaviour have been researched in both business and medical literature. Shopping enabled via the Internet now introduces new features to the shopping experience that translate to positive benefits for the shopper. Evidence now suggests that this new shopping experience may lead to problematic online shopping behaviour. This paper provides a theoretical review of the literature relevant to online shopping addiction (OSA). Based on this selective review, a conceptual model of OSA is presented. Method: The selective review of the literature draws on searches within databases relevant to both clinical and consumer behaviour literature including EBSCO, ABI Pro-Quest, Web of Science – Social Citations Index, Medline, PsycINFO and Pubmed. The article reviews current thinking on problematic, and specifically addictive, behaviour in relation to online shopping. Results: The review of the literature enables the extension of existing knowledge into the Internet-context. A conceptual model of OSA is developed with theoretical support provided for the inclusion of 7 predictor variables: low self-esteem, low self-regulation; negative emotional state; enjoyment; female gender; social anonymity and cognitive overload. The construct of OSA is defined and six component criteria of OSA are proposed based on established technological addiction criteria. Conclusions: Current Internet-based shopping experiences may trigger problematic behaviours which can be classified on a spectrum which at the extreme end incorporates OSA. The development of a conceptual model provides a basis for the future measurement and testing of proposed predictor variables and the outcome variable OSA. PMID:25215218

Towards an understanding of Internet-based problem shopping behaviour: The concept of online shopping addiction and its proposed predictors.

PubMed

Rose, Susan; Dhandayudham, Arun

2014-06-01

Compulsive and addictive forms of consumption and buying behaviour have been researched in both business and medical literature. Shopping enabled via the Internet now introduces new features to the shopping experience that translate to positive benefits for the shopper. Evidence now suggests that this new shopping experience may lead to problematic online shopping behaviour. This paper provides a theoretical review of the literature relevant to online shopping addiction (OSA). Based on this selective review, a conceptual model of OSA is presented. The selective review of the literature draws on searches within databases relevant to both clinical and consumer behaviour literature including EBSCO, ABI Pro-Quest, Web of Science - Social Citations Index, Medline, PsycINFO and Pubmed. The article reviews current thinking on problematic, and specifically addictive, behaviour in relation to online shopping. The review of the literature enables the extension of existing knowledge into the Internet-context. A conceptual model of OSA is developed with theoretical support provided for the inclusion of 7 predictor variables: low self-esteem, low self-regulation; negative emotional state; enjoyment; female gender; social anonymity and cognitive overload. The construct of OSA is defined and six component criteria of OSA are proposed based on established technological addiction criteria. Current Internet-based shopping experiences may trigger problematic behaviours which can be classified on a spectrum which at the extreme end incorporates OSA. The development of a conceptual model provides a basis for the future measurement and testing of proposed predictor variables and the outcome variable OSA.

NACA Lewis Researcher and Technicians Discuss a Test Setup

NASA Image and Video Library

1956-12-21

Researcher Bill Reiwaldt discusses the preparations for a test in the Altitude Wind Tunnel with technicians Jack Wagner and Dick Golladay at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. Research engineers developed ideas for tests that were often in response to requests from the military or aircraft industry. Arrangements were made to obtain an engine for the study and to transport it to the Cleveland laboratory. The engine was brought into the facility’s shop area, where it was readied for investigation. It was common for several different engines to be worked on simultaneously in the shop. The researcher would discuss the engine and the test objectives with the Test Installation Division and the facility’s technicians. The operations team would handle the installation of the instrumentation and fitting the test into the facility’s schedule. Upon completion of the previous test, the engine was removed. The next engine was lifted by an overhead crane and transported from the shop to the test section. The engine was connected to the measurement devices and fuel and oil supply lines. Engines were tested over numerous runs under varying conditions and with variations on the configuration. The findings and test procedure were then described in research or technical memorandums and distributed to industry.

36. Historic photo of Building 202 interior, shows shop area ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. Historic photo of Building 202 interior, shows shop area with engineers assembling twenty-thousand-pound-thrust rocket engine, December 15, 1958. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-49343. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

Performance comparison of plastic shopping bags in modern and traditional retail

NASA Astrophysics Data System (ADS)

Radini, F. A.; Wulandari, R.; Nasiri, S. J. A.; Winarto, D. A.

2017-07-01

Followed by implementation of paid plastic bag policy in Indonesia’s modern and traditional retail, community question related to plastic shopping bag performance arise. But, there is limited information about it. Therefore, the assessment of the performance to compare between plastic shopping bags in modern retail and traditional retail should be interesting. The observation performance of plastic shopping bag were weight holding capacity, tear resistant and elongation. This performance were tested using Universal Testing Machine. Physical and physico-chemical properties also identified to determine factor affecting the performance of plastic shopping bag. The physical properties were analysed using visual and thickness gauge to see the colour and measure the thickness. The analysis of physico-chemical properties were carried out using DSC (Differential Scanning Calorimetry), TGA (Thermal Gravimetry Analysis), Furnace and FTIR (Fourier Transform Infra Red Spectroscopy) to identify the materials, also its melting and decomposition temperature. The result showed that the performance difference between modern retail plastic bag with traditional retail plastic bag appears only in the performance of elongation. The elongation of modern retail plastic bag is 121 - 413%, while traditional has 170 - 609%. According to physico-chemical test result, modern retail and traditional retail plastic bag contain polyethylene as main material and has melting temperature in the range of High Density Polyethylene (HDPE) melting temperature. However, modern retail plastic bag has 18.31 - 33.87% of inorganic filler percentage, whereas the traditional retail plastic bag has 0.35 - 9.85%. This inorganic filler percentage probably a contributing factor in the elongation performance difference between modern retail plastic bag with traditional retail plastic bag.

The influence of international standards on optomechanical design

NASA Astrophysics Data System (ADS)

Parks, Robert E.

1992-12-01

In the last 10 to 15 years, a considerable body of international standards literature has been published on both mechanical and optical design. We discuss the influence of these internationally developed standards on the design and fabrication of optical systems. We conclude that while there are large benefits to be gained from using these international standards, there will have to be a substantial educational effort at all levels from project scientist to worker on the shop floor to take advantage of the benefits. Many sources to help in this education process are outlined.

A virtual shopping test for realistic assessment of cognitive function

PubMed Central

2013-01-01

Background Cognitive dysfunction caused by brain injury often prevents a patient from achieving a healthy and high quality of life. By now, each cognitive function is assessed precisely by neuropsychological tests. However, it is also important to provide an overall assessment of the patients’ ability in their everyday life. We have developed a Virtual Shopping Test (VST) using virtual reality technology. The objective of this study was to clarify 1) the significance of VST by comparing VST with other conventional tests, 2) the applicability of VST to brain-damaged patients, and 3) the performance of VST in relation to age differences. Methods The participants included 10 patients with brain damage, 10 age-matched healthy subjects for controls, 10 old healthy subjects, and 10 young healthy subjects. VST and neuropsychological tests/questionnaires about attention, memory and executive function were conducted on the patients, while VST and the Mini-Mental State Examination (MMSE) were conducted on the controls and healthy subjects. Within the VST, the participants were asked to buy four items in the virtual shopping mall quickly in a rational way. The score for evaluation included the number of items bought correctly, the number of times to refer to hints, the number of movements between shops, and the total time spent to complete the shopping. Results Some variables on VST correlated with the scores of conventional assessment about attention and everyday memory. The mean number of times referring to hints and the mean number of movements were significantly larger for the patients with brain damage, and the mean total time was significantly longer for the patients than for the controls. In addition, the mean total time was significantly longer for the old than for the young. Conclusions The results suggest that VST is able to evaluate the ability of attention and everyday memory in patients with brain damage. The time of VST is increased by age. PMID:23777412

A virtual shopping test for realistic assessment of cognitive function.

PubMed

Okahashi, Sayaka; Seki, Keiko; Nagano, Akinori; Luo, Zhiwei; Kojima, Maki; Futaki, Toshiko

2013-06-18

Cognitive dysfunction caused by brain injury often prevents a patient from achieving a healthy and high quality of life. By now, each cognitive function is assessed precisely by neuropsychological tests. However, it is also important to provide an overall assessment of the patients' ability in their everyday life. We have developed a Virtual Shopping Test (VST) using virtual reality technology. The objective of this study was to clarify 1) the significance of VST by comparing VST with other conventional tests, 2) the applicability of VST to brain-damaged patients, and 3) the performance of VST in relation to age differences. The participants included 10 patients with brain damage, 10 age-matched healthy subjects for controls, 10 old healthy subjects, and 10 young healthy subjects. VST and neuropsychological tests/questionnaires about attention, memory and executive function were conducted on the patients, while VST and the Mini-Mental State Examination (MMSE) were conducted on the controls and healthy subjects. Within the VST, the participants were asked to buy four items in the virtual shopping mall quickly in a rational way. The score for evaluation included the number of items bought correctly, the number of times to refer to hints, the number of movements between shops, and the total time spent to complete the shopping. Some variables on VST correlated with the scores of conventional assessment about attention and everyday memory. The mean number of times referring to hints and the mean number of movements were significantly larger for the patients with brain damage, and the mean total time was significantly longer for the patients than for the controls. In addition, the mean total time was significantly longer for the old than for the young. The results suggest that VST is able to evaluate the ability of attention and everyday memory in patients with brain damage. The time of VST is increased by age.

Nudging Leads Consumers In Colorado To Shop But Not Switch ACA Marketplace Plans.

PubMed

Marzilli Ericson, Keith M; Kingsdale, Jon; Layton, Tim; Sacarny, Adam

2017-02-01

The Affordable Care Act (ACA) dramatically expanded the use of regulated marketplaces in health insurance, but consumers often fail to shop for plans during open enrollment periods. Typically these consumers are automatically reenrolled in their old plans, which potentially exposes them to unexpected increases in their insurance premiums and cost sharing. We conducted a randomized intervention to encourage enrollees in an ACA Marketplace to shop for plans. We tested the effect of letters and e-mails with personalized information about the savings on insurance premiums that they could realize from switching plans and the effect of generic communications that simply emphasized the possibility of saving. The personalized and generic messages both increased shopping on the Marketplace's website by 23 percent, but neither type of message had a significant effect on plan switching. These findings show that simple "nudges" with even generic information can promote shopping in health insurance marketplaces, but whether they can lead to switching remains an open question. Project HOPE—The People-to-People Health Foundation, Inc.

Efficiently Distributing Component-based Applications Across Wide-Area Environments

DTIC Science & Technology

2002-01-01

a variety of sophisticated network-accessible services such as e-mail, banking, on-line shopping, entertainment, and serv - ing as a data exchange...product database Customer Serves as a façade to Order and Account Stateful Session Beans ShoppingCart Maintains list of items to be bought by customer...Pet Store tests; and JBoss 3.0.3 with Jetty 4.1.0, for the RUBiS tests) and a sin- gle database server ( Oracle 8.1.7 Enterprise Edition), each running

Omnichannel Customer Behavior: Key Drivers of Technology Acceptance and Use and Their Effects on Purchase Intention

PubMed Central

Juaneda-Ayensa, Emma; Mosquera, Ana; Sierra Murillo, Yolanda

2016-01-01

The advance of the Internet and new technologies over the last decade has transformed the retailing panorama. More and more channels are emerging, causing consumers to change their habits and shopping behavior. An omnichannel strategy is a form of retailing that, by enabling real interaction, allows customers to shop across channels anywhere and at any time, thereby providing them with a unique, complete, and seamless shopping experience that breaks down the barriers between channels. This paper aims to identify the factors that influence omnichannel consumers' behavior through their acceptance of and intention to use new technologies during the shopping process. To this end, an original model was developed to explain omnichannel shopping behavior based on the variables used in the UTAUT2 model and two additional factors: personal innovativeness and perceived security. The model was tested with a sample of 628 Spanish customers of the store Zara who had used at least two channels during their most recent shopping journey. The results indicate that the key determinants of purchase intention in an omnichannel context are, in order of importance: personal innovativeness, effort expectancy, and performance expectancy. The theoretical and managerial implications are discussed. PMID:27516749

Omnichannel Customer Behavior: Key Drivers of Technology Acceptance and Use and Their Effects on Purchase Intention.

PubMed

Juaneda-Ayensa, Emma; Mosquera, Ana; Sierra Murillo, Yolanda

2016-01-01

The advance of the Internet and new technologies over the last decade has transformed the retailing panorama. More and more channels are emerging, causing consumers to change their habits and shopping behavior. An omnichannel strategy is a form of retailing that, by enabling real interaction, allows customers to shop across channels anywhere and at any time, thereby providing them with a unique, complete, and seamless shopping experience that breaks down the barriers between channels. This paper aims to identify the factors that influence omnichannel consumers' behavior through their acceptance of and intention to use new technologies during the shopping process. To this end, an original model was developed to explain omnichannel shopping behavior based on the variables used in the UTAUT2 model and two additional factors: personal innovativeness and perceived security. The model was tested with a sample of 628 Spanish customers of the store Zara who had used at least two channels during their most recent shopping journey. The results indicate that the key determinants of purchase intention in an omnichannel context are, in order of importance: personal innovativeness, effort expectancy, and performance expectancy. The theoretical and managerial implications are discussed.

Decision support for clinical laboratory capacity planning.

PubMed

van Merode, G G; Hasman, A; Derks, J; Goldschmidt, H M; Schoenmaker, B; Oosten, M

1995-01-01

The design of a decision support system for capacity planning in clinical laboratories is discussed. The DSS supports decisions concerning the following questions: how should the laboratory be divided into job shops (departments/sections), how should staff be assigned to workstations and how should samples be assigned to workstations for testing. The decision support system contains modules for supporting decisions at the overall laboratory level (concerning the division of the laboratory into job shops) and for supporting decisions at the job shop level (assignment of staff to workstations and sample scheduling). Experiments with these modules are described showing both the functionality and the validity.

Drug seller adherence to clinical protocols with integrated management of malaria, pneumonia and diarrhoea at drug shops in Uganda.

PubMed

Awor, Phyllis; Wamani, Henry; Tylleskar, Thorkild; Peterson, Stefan

2015-07-16

Drug shops are usually the first source of care for febrile children in Uganda although the quality of care they provide is known to be poor. Within a larger quasi-experimental study introducing the WHO/UNICEF recommended integrated community case management (iCCM) of malaria, pneumonia and diarrhoea intervention for community health workers in registered drug shops, the level of adherence to clinical protocols by drug sellers was determined. All drug shops (N = 44) in the intervention area were included and all child visits (N = 7,667) from October 2011-June 2012 to the participating drug shops were analysed. Drug shops maintained a standard iCCM register where they recorded the children seen, their symptoms, diagnostic test performed, treatments given and actions taken. The proportion of children correctly assessed and treated was determined from the registers. Malaria management: 6,140 of 7,667 (80.1%) total visits to drug shops were of children with fever. 5986 (97.5%) children with fever received a malaria rapid diagnostic test (RDT) and the RDT positivity rate was 78% (95% CI 77-79). 4,961/5,307 (93.4%) children with a positive RDT received artemisinin combination therapy. Pneumonia management: after respiratory rate assessment of children with cough and fast/difficult breathing, 3,437 (44.8%) were categorized as "pneumonia", 3,126 (91.0%) of whom received the recommended drug-amoxicillin. Diarrhoea management: 2,335 (30.5%) child visits were for diarrhoea with 2,068 (88.6%) correctly treated with oral rehydration salts and zinc sulphate. Dual/Triple classification: 2,387 (31.1%) children had both malaria and pneumonia and 664 (8.7%) were classified as having three illnesses. Over 90% of the children with dual or triple classification were treated appropriately. Meanwhile, 381 children were categorized as severely sick (with a danger sign) with 309 (81.1%) of them referred for appropriate management. With the introduction of the iCCM intervention at drug shops in Eastern Uganda, it was possible to achieve high adherence to the treatment protocols, which is likely compatible with increased quality of care.

A&M. TAN607. Detail of installed hot shop viewing window almost ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Detail of installed hot shop viewing window almost complete. Cable channel is still exposed, lacking cover. Note bottle in upper left corner containing spare zinc bromide in even of leak from window. Date: October 20, 1954. INEEL negative no. 12560 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Molecular prevalence of Cryptosporidium species among household cats and pet shop kittens in Japan

PubMed Central

Ito, Yoichi; Itoh, Naoyuki; Iijima, Yuko; Kimura, Yuya

2017-01-01

Objectives To address the lack of up-to-date published data, the present study evaluates the PCR-based prevalence of Cryptosporidium species infection and molecular characteristics of isolates among household cats and pet shop kittens in Japan. Methods A total of 357 and 329 fresh faecal samples were collected from household cats and pet shop kittens, respectively, with or without clinical signs of infection. A nested PCR assay targeting the 18S rRNA gene was employed for the detection of Cryptosporidium species. After specific DNA fragments (approximately 826 base pairs) were confirmed, the amplicons were sequenced to determine species. Results Seven (2.0%) household cats and one (0.3%) pet shop kitten tested positive for the presence of Cryptosporidium species. In household cats, there was a significant difference in prevalence between cats aged <1 year (4.6%) and those aged ⩾1 year (0.4%). No significantly different prevalence was observed with regard to faecal condition in either household cats or pet shop kittens. A total of eight Cryptosporidium species isolates, seven from household cats and one from a pet shop kitten, were identified as Cryptosporidium felis. Conclusions and relevance The present study demonstrates the risk of zoonotic transmission of Cryptosporidium species from household cats and pet shop kittens to humans is low in Japan. PMID:28955478

Pathological Buying Online as a Specific Form of Internet Addiction: A Model-Based Experimental Investigation

PubMed Central

Trotzke, Patrick; Starcke, Katrin; Müller, Astrid; Brand, Matthias

2015-01-01

The study aimed to investigate different factors of vulnerability for pathological buying in the online context and to determine whether online pathological buying has parallels to a specific Internet addiction. According to a model of specific Internet addiction by Brand and colleagues, potential vulnerability factors may consist of a predisposing excitability from shopping and as mediating variable, specific Internet use expectancies. Additionally, in line with models on addiction behavior, cue-induced craving should also constitute an important factor for online pathological buying. The theoretical model was tested in this study by investigating 240 female participants with a cue-reactivity paradigm, which was composed of online shopping pictures, to assess excitability from shopping. Craving (before and after the cue-reactivity paradigm) and online shopping expectancies were measured. The tendency for pathological buying and online pathological buying were screened with the Compulsive Buying Scale (CBS) and the Short Internet Addiction Test modified for shopping (s-IATshopping). The results demonstrated that the relationship between individual’s excitability from shopping and online pathological buying tendency was partially mediated by specific Internet use expectancies for online shopping (model’s R² = .742, p < .001). Furthermore, craving and online pathological buying tendencies were correlated (r = .556, p < .001), and an increase in craving after the cue presentation was observed solely in individuals scoring high for online pathological buying (t(28) = 2.98, p < .01, d = 0.44). Both screening instruments were correlated (r = .517, p < .001), and diagnostic concordances as well as divergences were indicated by applying the proposed cut-off criteria. In line with the model for specific Internet addiction, the study identified potential vulnerability factors for online pathological buying and suggests potential parallels. The presence of craving in individuals with a propensity for online pathological buying emphasizes that this behavior merits potential consideration within the non-substance/behavioral addictions. PMID:26465593

Pathological Buying Online as a Specific Form of Internet Addiction: A Model-Based Experimental Investigation.

PubMed

Trotzke, Patrick; Starcke, Katrin; Müller, Astrid; Brand, Matthias

2015-01-01

The study aimed to investigate different factors of vulnerability for pathological buying in the online context and to determine whether online pathological buying has parallels to a specific Internet addiction. According to a model of specific Internet addiction by Brand and colleagues, potential vulnerability factors may consist of a predisposing excitability from shopping and as mediating variable, specific Internet use expectancies. Additionally, in line with models on addiction behavior, cue-induced craving should also constitute an important factor for online pathological buying. The theoretical model was tested in this study by investigating 240 female participants with a cue-reactivity paradigm, which was composed of online shopping pictures, to assess excitability from shopping. Craving (before and after the cue-reactivity paradigm) and online shopping expectancies were measured. The tendency for pathological buying and online pathological buying were screened with the Compulsive Buying Scale (CBS) and the Short Internet Addiction Test modified for shopping (s-IATshopping). The results demonstrated that the relationship between individual's excitability from shopping and online pathological buying tendency was partially mediated by specific Internet use expectancies for online shopping (model's R² = .742, p < .001). Furthermore, craving and online pathological buying tendencies were correlated (r = .556, p < .001), and an increase in craving after the cue presentation was observed solely in individuals scoring high for online pathological buying (t(28) = 2.98, p < .01, d = 0.44). Both screening instruments were correlated (r = .517, p < .001), and diagnostic concordances as well as divergences were indicated by applying the proposed cut-off criteria. In line with the model for specific Internet addiction, the study identified potential vulnerability factors for online pathological buying and suggests potential parallels. The presence of craving in individuals with a propensity for online pathological buying emphasizes that this behavior merits potential consideration within the non-substance/behavioral addictions.

Approach for axisymmetrical asphere polishing with full-area tools

NASA Astrophysics Data System (ADS)

Novi, Andrea; Melozzi, Mauro

1999-09-01

Aspherics up to 500 nm diameter in optical glass or in ceramic substrates have been fabricated using area- compensated polishing tools and conventional optical shop machines. The tool forms are derived starting from the actual shape of the part under figuring. The figure error is measured using an interferometer mounted on-line with the polishing machine. Measurements are taken after each polishing step to compute the new tool form. The process speeds up the fabrication of aspheres and it improves repeatability in the manufacturing of axisymmetrical optics using moderate cost equipment's up to astronomical requirements. In the paper we present some examples of polishing results using the above mentioned approach on different aspherics for space applications.

A&M. TAN607. Foundation plan for hot shop floor and pool. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Foundation plan for hot shop floor and pool. Tunnels to turntable. Motor pit. Ralph M. Parsons 902-3-ANP-607-S128. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-62-693-160722 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A&M. Outdoor turntable. Aerial view of trackage as of 1954. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. Outdoor turntable. Aerial view of trackage as of 1954. Camera faces northeast along line of track heading for the IET. Upper set of east/west tracks head for the hot shop; the other, for the cold shop. Date: November 24, 1954. INEEL negative no. 13203 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

First Peruvian binoculars

NASA Astrophysics Data System (ADS)

Baldwin, Guillermo; Gonzales, Franco; Pérez S., Carlos

2017-11-01

In Peru, as in almost all Latin America, precision optical industry is almost null. One reason is the scarcity of human and technological resources. But, a few years ago, a masters and diploma university program in optical engineering was started in our university: Pontificia Universidad Católica del Perú1 (PUCP) in Lima. Also, an optical shop on precision optics was implemented. Some students were trained at CIO in Leon, Mexico. In order to motivate optical business startups in Peru we planned to show some possibilities of optical devices fabrication trough doing prototypes. So, we started doing a small reflective telescope for moon observation2, 3, where mirror and ocular polishing and opto-mechanics had priority. Aluminum evaporation was included. Now, we do a new step developing a binocular, as we know, it never was made before in Peru. This work includes the binocular geometric optics and opto-mechanical designs, the ocular manufacturing, and the binocular characterization of an 8x35 binocular for amateur observation.

KSC-2011-1449

NASA Image and Video Library

2011-02-15

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, workers receive training atop a mast climber that is attached to launch simulation towers outside the Launch Equipment Test Facility. The training includes attaching carrier plates, water and air systems, and electricity to the climber to simulate working in Kennedy's Vehicle Assembly Building (VAB). Mast climbers can be substituted for fixed service structures currently inside the VAB to provide access to any type of launch vehicle. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. Last year, the facility underwent a major upgrade to support even more programs, projects and customers. It houses a 6,000-square-foot high bay, cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator and a cryogenic system. Photo credit: NASA/Jim Grossmann

KSC-2011-1446

NASA Image and Video Library

2011-02-15

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, workers receive training atop a mast climber that is attached to launch simulation towers outside the Launch Equipment Test Facility. The training includes attaching carrier plates, water and air systems, and electricity to the climber to simulate working in Kennedy's Vehicle Assembly Building (VAB). Mast climbers can be substituted for fixed service structures currently inside the VAB to provide access to any type of launch vehicle. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. Last year, the facility underwent a major upgrade to support even more programs, projects and customers. It houses a 6,000-square-foot high bay, cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator and a cryogenic system. Photo credit: NASA/Jim Grossmann

KSC-2011-1450

NASA Image and Video Library

2011-02-15

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, training takes place atop a mast climber that is attached to launch simulation towers outside the Launch Equipment Test Facility. The training includes attaching carrier plates, water and air systems, and electricity to the climber to simulate working in Kennedy's Vehicle Assembly Building (VAB). Mast climbers can be substituted for fixed service structures currently inside the VAB to provide access to any type of launch vehicle. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. Last year, the facility underwent a major upgrade to support even more programs, projects and customers. It houses a 6,000-square-foot high bay, cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator and a cryogenic system. Photo credit: NASA/Jim Grossmann

KSC-2011-1448

NASA Image and Video Library

2011-02-15

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, workers receive training atop a mast climber that is attached to launch simulation towers outside the Launch Equipment Test Facility. The training includes attaching carrier plates, water and air systems, and electricity to the climber to simulate working in Kennedy's Vehicle Assembly Building (VAB). Mast climbers can be substituted for fixed service structures currently inside the VAB to provide access to any type of launch vehicle. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. Last year, the facility underwent a major upgrade to support even more programs, projects and customers. It houses a 6,000-square-foot high bay, cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator and a cryogenic system. Photo credit: NASA/Jim Grossmann

KSC-2011-1447

NASA Image and Video Library

2011-02-15

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, workers receive training on a mast climber that is attached to launch simulation towers outside the Launch Equipment Test Facility. The training includes attaching carrier plates, water and air systems, and electricity to the climber to simulate working in Kennedy's Vehicle Assembly Building (VAB). Mast climbers can be substituted for fixed service structures currently inside the VAB to provide access to any type of launch vehicle. Since 1977, the facility has supported NASA’s Launch Services, shuttle, International Space Station, and Constellation programs, as well as commercial providers. Last year, the facility underwent a major upgrade to support even more programs, projects and customers. It houses a 6,000-square-foot high bay, cable fabrication and molding shop, pneumatics shop, machine and weld shop and full-scale control room. Outside, the facility features a water flow test loop, vehicle motion simulator and a cryogenic system. Photo credit: NASA/Jim Grossmann

A novel discrete PSO algorithm for solving job shop scheduling problem to minimize makespan

NASA Astrophysics Data System (ADS)

Rameshkumar, K.; Rajendran, C.

2018-02-01

In this work, a discrete version of PSO algorithm is proposed to minimize the makespan of a job-shop. A novel schedule builder has been utilized to generate active schedules. The discrete PSO is tested using well known benchmark problems available in the literature. The solution produced by the proposed algorithms is compared with best known solution published in the literature and also compared with hybrid particle swarm algorithm and variable neighborhood search PSO algorithm. The solution construction methodology adopted in this study is found to be effective in producing good quality solutions for the various benchmark job-shop scheduling problems.

Infectious microorganisms in mice (Mus musculus) purchased from commercial pet shops in Germany.

PubMed

Dammann, P; Hilken, G; Hueber, B; Köhl, W; Bappert, M T; Mähler, M

2011-10-01

In this study, we investigated the prevalence of infectious microorganisms (viruses, bacteria, fungi and eukaryotic parasites) in mice from different pet shops in Germany; such animals may compromise the hygienic integrity of laboratory animal vivaria if private pet holders act as unintended vectors of infections carried by them. House mice sold as pets or feed specimens were purchased from different pet shops and tested for a comprehensive panel of unwanted microorganisms. We found a number of microorganisms in these pet shop mice, the most prevalent of which were Helicobacter species (92.9%), mouse parvovirus (89.3%), mouse hepatitis virus (82.7%), Pasteurella pneumotropica (71.4%) and Syphacia species (57.1%). Several microorganisms (e.g. mouse parvovirus, Theiler's murine encephalomyelitis virus, pneumonia virus of mice, Encephalitozoon cuniculi, Clostridium piliforme) had considerably higher prevalences than those reported in similar studies on wild mice from North America, Europe or Australia. Our study shows that direct contact with pet shop mice may constitute a risk for laboratory animal vivaria if hygienic precautions are not taken. However, even relatively simple precautions seem effective enough to hold the risk at bay.

Production scheduling and rescheduling with genetic algorithms.

PubMed

Bierwirth, C; Mattfeld, D C

1999-01-01

A general model for job shop scheduling is described which applies to static, dynamic and non-deterministic production environments. Next, a Genetic Algorithm is presented which solves the job shop scheduling problem. This algorithm is tested in a dynamic environment under different workload situations. Thereby, a highly efficient decoding procedure is proposed which strongly improves the quality of schedules. Finally, this technique is tested for scheduling and rescheduling in a non-deterministic environment. It is shown by experiment that conventional methods of production control are clearly outperformed at reasonable run-time costs.

Examining the Influence of price and accessibility on willingness to shop at farmers' markets among low-income eastern North Carolina women.

PubMed

McGuirt, Jared T; Jilcott Pitts, Stephanie B; Ward, Rachel; Crawford, Thomas W; Keyserling, Thomas C; Ammerman, Alice S

2014-01-01

To examine the influence of farmers' market pricing and accessibility on willingness to shop at farmers' markets, among low-income women. Qualitative interviews using scenarios with quantitative assessment of willingness to shop at farmers' markets given certain pricing and accessibility scenarios. Eastern North Carolina. A total of 37 low-income women of childbearing age (18-44 years) receiving family planning services at the health department. Willingness to shop at a farmers' market. Fisher's exact test was used to examine associations between willingness to shop at farmers' markets by urban/rural residence, race, and employment status. Direct quotations relevant to participants' use of farmers' markets were extracted based on a positive deviance framework. Participants were increasingly willing to shop at the farmers' market when price savings increased and when the market was incrementally closer to their residence. Willingness was highest when there was at least a 20% price savings. Participants seemed to be influenced more by a visual representation of a greater quantity of produce received with the price savings rather than a quantitative representation of the money saved by the reduced price. Future farmers' market interventions should take into account these consumer level preferences. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Examining the influence of price and accessibility on willingness to shop at farmers’ markets among low-income eastern North Carolina women

PubMed Central

McGuirt, Jared T.; Jilcott Pitts, Stephanie B.; Ward, Rachel; Crawford, Thomas W.; Keyserling, Thomas C.; Ammerman, Alice S.

2013-01-01

Objective: To examine the influence of farmers’ market pricing and accessibility on willingness to shop at farmers’ markets, among low-income women. Design: Qualitative interviews using scenarios with quantitative assessment of willingness to shop at farmers’ market given certain pricing and accessibility scenarios. Setting: Eastern North Carolina. Participants: Thirty seven low-income women of child-bearing age (18-44 years) receiving family planning services at the health department. Phenomenon of Interest: Willingness to shop at a farmers’ market. Analysis: Fisher’s exact test was used to examine associations between willingness to shop at farmers’ markets by urban/rural residence, race, and employment status. Direct quotations relevant to participants' use of farmers' markets were extracted based upon a positive deviance framework. Results: Participants were increasingly willing to shop at the farmers’ market when price savings increased and when the market was incrementally closer to their residence. Willingness was highest when there was at least a 20% price savings. Participants seemed to be influenced more by a visual representation of a greater quantity of produce received with the price savings rather than the quantitative representation of the money saved by the reduced price. Conclusions and Implications: Future farmers’ market interventions should take into account these consumer level preferences. PMID:24201077

The Bergen Shopping Addiction Scale: reliability and validity of a brief screening test.

PubMed

Andreassen, Cecilie S; Griffiths, Mark D; Pallesen, Ståle; Bilder, Robert M; Torsheim, Torbjørn; Aboujaoude, Elias

2015-01-01

Although excessive and compulsive shopping has been increasingly placed within the behavioral addiction paradigm in recent years, items in existing screens arguably do not assess the core criteria and components of addiction. To date, assessment screens for shopping disorders have primarily been rooted within the impulse-control or obsessive-compulsive disorder paradigms. Furthermore, existing screens use the terms 'shopping,' 'buying,' and 'spending' interchangeably, and do not necessarily reflect contemporary shopping habits. Consequently, a new screening tool for assessing shopping addiction was developed. Initially, 28 items, four for each of seven addiction criteria (salience, mood modification, conflict, tolerance, withdrawal, relapse, and problems), were constructed. These items and validated scales (i.e., Compulsive Buying Measurement Scale, Mini-International Personality Item Pool, Hospital Anxiety and Depression Scale, Rosenberg Self-Esteem Scale) were then administered to 23,537 participants (M age = 35.8 years, SD age = 13.3). The highest loading item from each set of four pooled items reflecting the seven addiction criteria were retained in the final scale, The Bergen Shopping Addiction Scale (BSAS). The factor structure of the BSAS was good (RMSEA = 0.064, CFI = 0.983, TLI = 0.973) and coefficient alpha was 0.87. The scores on the BSAS converged with scores on the Compulsive Buying Measurement Scale (CBMS; 0.80), and were positively correlated with extroversion and neuroticism, and negatively with conscientiousness, agreeableness, and intellect/imagination. The scores of the BSAS were positively associated with anxiety, depression, and low self-esteem and inversely related to age. Females scored higher than males on the BSAS. The BSAS is the first scale to fully embed shopping addiction within an addiction paradigm. A recommended cutoff score for the new scale and future research directions are discussed.

The Bergen Shopping Addiction Scale: reliability and validity of a brief screening test

PubMed Central

Andreassen, Cecilie S.; Griffiths, Mark D.; Pallesen, Ståle; Bilder, Robert M.; Torsheim, Torbjørn; Aboujaoude, Elias

2015-01-01

Although excessive and compulsive shopping has been increasingly placed within the behavioral addiction paradigm in recent years, items in existing screens arguably do not assess the core criteria and components of addiction. To date, assessment screens for shopping disorders have primarily been rooted within the impulse-control or obsessive-compulsive disorder paradigms. Furthermore, existing screens use the terms ‘shopping,’ ‘buying,’ and ‘spending’ interchangeably, and do not necessarily reflect contemporary shopping habits. Consequently, a new screening tool for assessing shopping addiction was developed. Initially, 28 items, four for each of seven addiction criteria (salience, mood modification, conflict, tolerance, withdrawal, relapse, and problems), were constructed. These items and validated scales (i.e., Compulsive Buying Measurement Scale, Mini-International Personality Item Pool, Hospital Anxiety and Depression Scale, Rosenberg Self-Esteem Scale) were then administered to 23,537 participants (Mage = 35.8 years, SDage = 13.3). The highest loading item from each set of four pooled items reflecting the seven addiction criteria were retained in the final scale, The Bergen Shopping Addiction Scale (BSAS). The factor structure of the BSAS was good (RMSEA = 0.064, CFI = 0.983, TLI = 0.973) and coefficient alpha was 0.87. The scores on the BSAS converged with scores on the Compulsive Buying Measurement Scale (CBMS; 0.80), and were positively correlated with extroversion and neuroticism, and negatively with conscientiousness, agreeableness, and intellect/imagination. The scores of the BSAS were positively associated with anxiety, depression, and low self-esteem and inversely related to age. Females scored higher than males on the BSAS. The BSAS is the first scale to fully embed shopping addiction within an addiction paradigm. A recommended cutoff score for the new scale and future research directions are discussed. PMID:26441749

Impact of food advertising on food purchases by students in primary and secondary schools in south-eastern Poland.

PubMed

Mazur, A; Telega, G; Kotowicz, A; Małek, H; Jarochowicz, S; Gierczak, B; Mazurkiewicz, M; Pop, T; Zajkiewicz, K; Drużbicki, M; Mazur, D

2008-09-01

The aim of the present study was to determine the impact of food advertising in primary and secondary schools on the food purchasing habits of children. All forty-four primary and secondary schools in Rzeszow, Poland were included in the investigation; 15000 children attend primary and secondary schools in the region. Schools were visited by members of the research team, who filled in a questionnaire regarding the type of food products displayed or advertised in the school shop window and recorded the presence of direct corporate advertising in the proximity of the school shop. Shop owners were asked to fill in a form describing food purchases by students within the week preceding the visit. The school principal (or one of teachers) completed a form describing the school's policy regarding food advertising and the sponsorship of school activities by food companies. Recommended foods like milk, yogurts and fruit were offered by only 40.9 % of shops. There was a correlation between foods offered in the shop and foods purchased by students. In schools, 40.9% (95% CI 25.8, 56.0%) of shop windows displayed or advertised 'healthy' foods while 9.1% (95% CI 0.0, 17.9%) of shops displayed advertisements of food companies. The difference between display of 'healthy' food in shop windows and display of food on company advertisements was significant (likelihood ratio chi2 test, P < 0.04). Type of school (primary v. secondary) was not significant factor in advertising or purchasing pattern. Educational programmes should be introduced in schools with the aim of improving the understanding of nutritional principles among pupils, teachers and parents.

1. Credit PSR. This view captures the main entrance to ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Credit PSR. This view captures the main entrance to the Administration/Shops Building, constructed in 1963, looking north northeast (30°). The plaque at the base of the flagpole commemorates the first firing of a liquid-fueled rocket engine at Test Stand "A" in 1945. - Jet Propulsion Laboratory Edwards Facility, Administration & Shops Building, Edwards Air Force Base, Boron, Kern County, CA

Beauty and the beast: results of the Rhode Island smokefree shop initiative.

PubMed

Linnan, Laura A; Emmons, Karen M; Abrams, David B

2002-01-01

Licensed hairdressing facilities are prevalent in communities nationwide and represent a unique and promising channel for delivering public health interventions. The Rhode Island Smokefree Shop Initiative tested the feasibility of using these facilities to deliver smoking policy interventions statewide. A statewide survey of hairdressing facilities was followed by interventions targeted to the readiness level (high/low) of respondents to adopt smoke-free policies.

Differential Validities for Shop Courses: Proposal B: Follow-Up of Subjects' Work Experiences. Final Report. Vol I: Procedures and Results.

ERIC Educational Resources Information Center

Isabelle, L. A.; Lokan, J. J.

Follow-up information was collected on 1500 students who attended a two-year occupational high school, in order to relate predictor measures to success during training and subsequent job success. Although not predictive of dropouts, variables in the pre-test battery did predict performance in academic and shop courses; ratings of job success were…

Deception and Shopping Behavior Among Current Cigarette Smokers: A Web-Based, Randomized Virtual Shopping Experiment.

PubMed

Dutra, Lauren McCarl; Nonnemaker, James; Taylor, Nathaniel; Kim, Annice E

2018-06-29

Virtual stores can be used to identify influences on consumer shopping behavior. Deception is one technique that may be used to attempt to increase the realism of virtual stores. The objective of the experiment was to test whether the purchasing behavior of participants in a virtual shopping task varied based on whether they were told that they would receive the products they selected in a virtual convenience store (a form of deception) or not. We recruited a US national sample of 402 adult current smokers by email from an online panel of survey participants. They completed a fully automated randomized virtual shopping experiment with a US $15 or US $20 budget in a Web-based virtual convenience store. We told a random half of participants that they would receive the products they chose in the virtual store or the cash equivalent (intervention condition), and the other random half simply to conduct a shopping task (control condition). We tested for differences in demographics, tobacco use behaviors, and in-store purchases (outcome variable, assessed by questionnaire) by experimental condition. The characteristics of the participants (398/402, 99.0% with complete data) were comparable across conditions except that the intervention group contained slightly more female participants (103/197, 52.3%) than the control group (84/201, 41.8%; P=.04). We did not find any other significant differences in any other demographic variables or tobacco use, or in virtual store shopping behaviors, including purchasing any tobacco (P=.44); purchasing cigarettes (P=.16), e-cigarettes (P=.54), cigars (P=.98), or smokeless tobacco (P=.72); amount spent overall (P=.63) or on tobacco (P=.66); percentage of budget spent overall (P=.84) or on tobacco (P=.74); number of total items (P=.64) and tobacco items purchased (P=.54); or total time spent in the store (P=.07). We found that telling participants that they will receive the products they select in a virtual store did not influence their purchases. This finding suggests that deception may not affect consumer behavior and, as a result, may not be necessary in virtual shopping experiments. ©Lauren McCarl Dutra, James Nonnemaker, Nathaniel Taylor, Annice E Kim. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 29.06.2018.

Paint shop, coach shop, car shop, and blacksmith shop (all ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Paint shop, coach shop, car shop, and blacksmith shop (all car department), all north of the roadhouse and locomotive shops. Photographed between 1880 and 1888 - Chicago, Burlington & Quincy Railroad, Roundhouse & Shops, Broadway & Spring Streets, Aurora, Kane County, IL

Ultrasonic interface level analyzer shop test procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

STAEHR, T.W.

1999-05-24

The Royce Instrument Corporation Model 2511 Interface Level Analyzer (URSILLA) system uses an ultrasonic ranging technique (SONAR) to measure sludge depths in holding tanks. Three URSILLA instrument assemblies provided by the W-151 project are planned to be used during mixer pump testing to provide data for determining sludge mobilization effectiveness of the mixer pumps and sludge settling rates. The purpose of this test is to provide a documented means of verifying that the functional components of the three URSILLA instruments operate properly. Successful completion of this Shop Test Procedure (STP) is a prerequisite for installation in the AZ-101 tank. Themore » objective of the test is to verify the operation of the URSILLA instruments and to verify data collection using a stand alone software program.« less

Introducing rapid diagnostic tests for malaria into drug shops in Uganda: design and implementation of a cluster randomized trial.

PubMed

Mbonye, Anthony K; Magnussen, Pascal; Chandler, Clare I R; Hansen, Kristian S; Lal, Sham; Cundill, Bonnie; Lynch, Caroline A; Clarke, Siân E

2014-07-29

An intervention was designed to introduce rapid diagnostics tests for malaria (mRDTs) into registered drug shops in Uganda to encourage rational and appropriate treatment of malaria with artemisinin-based combination therapy (ACT). We conducted participatory training of drug shop vendors and implemented supporting interventions to orientate local communities (patients) and the public sector (health facility staff and district officials) to the behavioral changes in diagnosis, treatment and referral being introduced in drug shops. The intervention was designed to be evaluated through a cluster randomized trial. In this paper, we present detailed design, implementation and evaluation experiences in order to help inform future studies of a complex nature. Three preparatory studies (formative, baseline and willingness-to-pay) were conducted to explore perceptions on diagnosis and treatment of malaria at drug shops, and affordable prices for mRDTs and ACTs in order to inform the design of the intervention and implementation modalities. The intervention required careful design with the intention to be acceptable, sustainable and effective. Critical components of intervention were: community sensitization and creating awareness, training of drug shop vendors to diagnose malaria with mRDTs, treat and refer customers to formal health facilities, giving pre-referral rectal artesunate and improved record-keeping. The primary outcome was the proportion of patients receiving appropriately-targeted treatment with ACT, evaluated against microscopy on a research blood slide. Introducing mRDTs in drug shops may seem simple, but our experience of intervention design, conduct and evaluation showed this to be a complex process requiring multiple interventions and evaluation components drawing from a combination of epidemiological, social science and health economics methodologies. The trial was conducted in phases sequenced such that each benefited from the other. The main challenges in designing this trial were maintaining a balance between a robust intervention to support effective behaviour change and introducing practices that would be sustainable in a real-life situation in tropical Africa; as well as achieving a detailed evaluation without inadvertently influencing prescribing behaviour. NCT01194557 registered with ClinicalTrials.gov 2 September 2010.

Interactive Fringe Analysis System: Applications To Moire Contourogram And Interferogram

NASA Astrophysics Data System (ADS)

Yatagai, T.; Idesawa, M.; Yamaashi, Y.; Suzuki, M.

1982-10-01

A general purpose fringe pattern processing facility was developed in order to analyze moire photographs used for scoliosis diagnoses and interferometric patterns in optical shops. A TV camera reads a fringe profile to be analyzed, and peaks of the fringe are detected by a microcomputer. Fringe peak correction and fringe order determination are performed with the man-machine interactive software developed. A light pen facility and an image digitizer are employed for interaction. In the case of two-dimensional fringe analysis, we analyze independently analysis lines parallel to each other and a reference line perpendicular to the parallel analysis lines. Fringe orders of parallel analysis lines are uniquely determined by using the fringe order of the reference line. Some results of analysis of moire contourograms, interferometric testing of silicon wafers, and holographic measurement of thermal deformation are presented.

Measuring large aspherics using a commercially available 3D-coordinate measuring machine

NASA Astrophysics Data System (ADS)

Otto, Wolfgang; Matthes, Axel; Schiehle, Heinz

2000-07-01

A CNC-controlled precision measuring machine is a very powerful tool in the optical shop not only to determine the surface figure, but also to qualify the radius of curvature and conic constant of aspherics. We used a commercially available 3D-coordinate measuring machine (CMM, ZEISS UPMC 850 CARAT S-ACC) to measure the shape of the GEMINI 1-m convex secondary mirrors at different lapping and polishing stages. To determine the measuring accuracy we compared the mechanical measurements with the results achieved by means of an interferometrical test setup. The data obtained in an early stage of polishing were evaluated in Zernike polynomials which show a very good agreement. The deviation concerning long wave rotational symmetrical errors was 20 nm rms, whereas the accuracy measuring of mid spatial frequency deviations was limited to about 100 nm rms.

The development and pilot testing of the marijuana retail surveillance tool (MRST): assessing marketing and point-of-sale practices among recreational marijuana retailers.

PubMed

Berg, Carla J; Henriksen, Lisa; Cavazos-Rehg, Patricia; Schauer, Gillian L; Freisthler, Bridget

2017-12-01

As recreational marijuana expands, it is critical to develop standardized surveillance measures to study the retail environment. To this end, our research team developed and piloted a tool assessing recreational marijuana retailers in a convenience sample of 20 Denver retailers in 2016. The tool assesses: (i) compliance and security (e.g. age-of-sale signage, ID checks, security cameras); (ii) marketing (i.e. promotions, product availability and price) and (iii) contextual and neighborhood features (i.e. retailer type, facilities nearby). Most shops (90.0%) indicated the minimum age requirement, all verified age. All shops posted interior ads (M = 2.6/retailer, SD = 3.4), primarily to promote edibles and other non-smoked products. Price promotions were common in shops (73.7%), 57.9% used social media promotions and 31.6% had take-away materials (e.g. menus, party promotions). Nearly half of the shops (42.1%) advertised health claims. All shops offered bud, joints, honey oil, tinctures, kief, beverages, edibles and topicals; fewer sold clones and seeds. Six shops (31.6%) sold shop-branded apparel and/or paraphernalia. Prices for bud varied within and between stores ($20-$45/'eighth', ∼3.5 g). Twelve were recreational only, and eight were both recreational and medicinal. Liquor stores were commonly proximal. Reliability assessments with larger, representative samples are needed to create a standardized marijuana retail surveillance tool. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Beauty and the Beast: Results of the Rhode Island Smokefree Shop Initiative

PubMed Central

Linnan, Laura A.; Emmons, Karen M.; Abrams, David B.

2002-01-01

Licensed hairdressing facilities are prevalent in communities nationwide and represent a unique and promising channel for delivering public health interventions. The Rhode Island Smokefree Shop Initiative tested the feasibility of using these facilities to deliver smoking policy interventions statewide. A statewide survey of hairdressing facilities was followed by interventions targeted to the readiness level (high/low) of respondents to adopt smoke-free policies. PMID:11772752

120. ARAI Expansion of ARA627 shop and maintenance building for ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

120. ARA-I Expansion of ARA-627 shop and maintenance building for new use as materials and metallurgy laboratory. Shows ground floor plan addition of gas analyzer room, fatigue testing room, microscope room, and offices. Idaho Nuclear Corporation 1230-ARA-627-A-5. Date: June 1970. Ineel index code no. 068-0627-00-400-154062. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

Managing a cluster outbreak of psittacosis in Belgium linked to a pet shop visit in The Netherlands.

PubMed

DE Boeck, C; Dehollogne, C; Dumont, A; Spierenburg, M; Heijne, M; Gyssens, I; VAN DER Hilst, J; Vanrompay, D

2016-06-01

In July 2013, a Belgian couple were admitted to hospital because of pneumonia. Medical history revealed contact with birds. Eleven days earlier, they had purchased a lovebird in a pet shop in The Netherlands. The bird became ill, with respiratory symptoms. The couple's daughter who accompanied them to the pet shop, reported similar symptoms, but was travelling abroad. On the suspicion of psittacosis, pharyngeal swabs from the couple were taken and sent to the Belgian reference laboratory for psittacosis. Culture and nested polymerase chain reaction (PCR) tests were positive for the presence of Chlamydia psittaci, and ompA genotyping indicated genotype A in both patients. The patients were treated with doxycycline and the daughter started quinolone therapy; all three recovered promptly. Psittacosis is a notifiable disease in Belgium and therefore local healthcare authorities were informed. They contacted their Dutch colleagues, who visited the pet shop. Seven pooled faecal samples were taken and analysed using PCR by the Dutch national reference laboratory for notifiable animal diseases for the presence of Chlamydia psittaci. Four (57%) samples tested positive, genotyping revealed genotype A. Enquiring about exposure to pet birds is essential when patients present with pneumonia. Reporting to health authorities, even across borders, is warranted to prevent further spread.

[Analysis of behavior related to use of the Internet, mobile telephones, compulsive shopping and gambling among university students].

PubMed

Ruiz-Olivares, Rosario; Lucena, Valentina; Pino, M José; Herruzo, Javier

2010-01-01

The aim of this study is to obtain knowledge about habits related to addictive behaviour (pathological gambling, Internet, compulsive shopping, use of mobile telephones, etc.) that may be displayed by young students at the University of Cordoba (Spain), and to relate this behaviour with variables such as age, sex, course year, macro-field of study (arts/sciences) and the consumption of substances such as alcohol, tobacco, cannabis and cocaine. Using an ex-post facto single-group design (Montero & Leon, 2007), we applied a questionnaire especially designed to gather socio-demographic information on substance use and behavioural patterns related to "non-substance" addictions, which included the Shopping Addiction Test, Echeburua's Internet Addiction Test (2003) and Fernandez-Montalvo and Echeburua's Short Pathological Gambling Questionnaire (1997). A total of 1,011 students participated in the study (42.7% males and 57.3% females), with an age range of 18 to 29. Significant differences were found between mean score on the questionnaires and variables such as age, sex, field of studies and course year. It would seem that being female is a protective factor for Internet and gambling addiction, being a sciences student is a risk factor for gambling addiction, and being older and being an arts student are risk factors for shopping addiction. In conclusion, it can be stated that the students surveyed showed moderate incidence of behaviours such as Internet browsing, gambling, shopping and mobile phone use, whilst a very small group are close to having an addiction problem with such behaviours.

Optical fabrication of lightweighted 3D printed mirrors

NASA Astrophysics Data System (ADS)

Herzog, Harrison; Segal, Jacob; Smith, Jeremy; Bates, Richard; Calis, Jacob; De La Torre, Alyssa; Kim, Dae Wook; Mici, Joni; Mireles, Jorge; Stubbs, David M.; Wicker, Ryan

2015-09-01

Direct Metal Laser Sintering (DMLS) and Electron Beam Melting (EBM) 3D printing technologies were utilized to create lightweight, optical grade mirrors out of AlSi10Mg aluminum and Ti6Al4V titanium alloys at the University of Arizona in Tucson. The mirror prototypes were polished to meet the λ/20 RMS and λ/4 P-V surface figure requirements. The intent of this project was to design topologically optimized mirrors that had a high specific stiffness and low surface displacement. Two models were designed using Altair Inspire software, and the mirrors had to endure the polishing process with the necessary stiffness to eliminate print-through. Mitigating porosity of the 3D printed mirror blanks was a challenge in the face of reconciling new printing technologies with traditional optical polishing methods. The prototypes underwent Hot Isostatic Press (HIP) and heat treatment to improve density, eliminate porosity, and relieve internal stresses. Metal 3D printing allows for nearly unlimited topological constraints on design and virtually eliminates the need for a machine shop when creating an optical quality mirror. This research can lead to an increase in mirror mounting support complexity in the manufacturing of lightweight mirrors and improve overall process efficiency. The project aspired to have many future applications of light weighted 3D printed mirrors, such as spaceflight. This paper covers the design/fab/polish/test of 3D printed mirrors, thermal/structural finite element analysis, and results.

Compact all-fiber interferometer system for shock acceleration measurement

NASA Astrophysics Data System (ADS)

Zhao, Jiang; Pi, Shaohua; Hong, Guangwei; Zhao, Dong; Jia, Bo

2013-08-01

Acceleration measurement plays an important role in a variety of fields in science and engineering. In particular, the accurate, continuous and non-contact recording of the shock acceleration profiles of the free target surfaces is considered as a critical technique in shock physics. Various kinds of optical interferometers have been developed to monitor the motion of the surfaces of shocked targets since the 1960s, for instance, the velocity interferometer system for any reflector, the fiber optic accelerometer, the photonic Doppler velocimetry system and the displacement interferometer. However, most of such systems rely on the coherent quasi-monochromatic illumination and discrete optic elements, which are costly in setting-up and maintenance. In 1996, L. Levin et al reported an interferometric fiber-optic Doppler velocimeter with high-dynamic range, in which fiber-coupled components were used to replace the discrete optic elements. However, the fringe visibility of the Levin's system is low because of the coupled components, which greatly limits the reliability and accuracy in the shock measurement. In this paper, a compact all-fiber interferometer system for measuring the shock acceleration is developed and tested. The advantage of the system is that not only removes the non-interfering light and enhances the fringe visibility, but also reduces polarization induced signal fading and the polarization induced phase shift. Moreover, it also does not require a source of long coherence length. The system bases entirely on single-mode fiber optics and mainly consists of a polarization beam splitter, a faraday rotator, a depolarizer and a 3×3 single-mode fiber coupler which work at 1310 nm wavelength. The optical systems of the interferometer are described and the experimental results compared with a shock acceleration calibration system with a pneumatic exciter (PneuShockTM Model 9525C by The Modal Shop) are reported. In the shock acceleration test, the interferometer system measured shock acceleration with peak accelerations of ~100,000 m/s2 and the durations of ~0.2 ms which are conformed to the results of the shock acceleration calibration system. The measured relative error of the acceleration is within 3%.

Assessing Preliminary Impact of the North Carolina Community Transformation Grant Project Farmers' Market Initiatives Among Rural Residents.

PubMed

Jilcott Pitts, Stephanie B; McGuirt, Jared T; Wu, Qiang; Rushing, Jill; Uslan, Daniella; Stanley, Karen K; Bullock, Sally L; Ward, Rachel K; Rafferty, Ann P; Ammerman, Alice S

2016-05-01

Using the Social Determinants of Health as the study's theoretical underpinning, the authors examined the impact of the North Carolina Community Transformation Grant Project farmers' market initiatives on changes in awareness and use of farmers' markets, and fruit and vegetable consumption. During the farmers' market season, the researchers conducted a random digit-dial telephone survey among residents in 3 rural North Carolina counties to examine changes in farmers' market awareness, shopping, and fruit and vegetable consumption. They examined change over 1 year using t tests, chi-square tests, and propensity score matching. In 1 county there were increases in farmers' market shopping and fruit and vegetable consumption, and in 1 county there were decreases in farmers' market shopping and fruit and vegetable consumption. The impact of farmers' market initiatives may be affected by county-specific socioeconomic contexts. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

[Two cases of Chlamydia psittaci infection occurring in employees of the same pet shop].

PubMed

Maegawa, N; Emoto, T; Mori, H; Yamaguchi, D; Fujinaga, T; Tezuka, N; Sakai, N; Ohtsuka, N; Fukuse, T

2001-10-01

We report here 2 cases of psittacosis in a pet shop. In the first case, a 44-year-old male was admitted with fever, and a chest radiograph showed an infiltration shadow in the right lower lung. One day later, a colleague of the first patient, a 42-year-old man, developed fever and was admitted. In this patient, chest radiography revealed an infiltration shadow in the left lower lung. Both patients had mild liver dysfunction. The serum titer of a complement fixation (CF) test against Chlamydia psittaci was elevated fourfold in the first case and sixteen-fold in the second on the analysis of paired acute- and convalescent-phase serum specimens. Clinical symptoms and abnormal laboratory data were attenuated by the administration of minocycline for 2 weeks. Since both patients worked in same pet shop and since some parakeets at the shop had died, we speculated that the psittacosis had originated from these birds.

A&M. TAN607 second floor plan for hot shop. Roof of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 second floor plan for hot shop. Roof of pool. Viewing window locations. Special equipment room. This drawing was re-drawn to show conditions in 1994. Ralph M. Parsons 902-3-ANP-607-A 101. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-060-00-693-106753 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A&M. TAN607. Sections for second phase expansion: engine maintenance, machine, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Sections for second phase expansion: engine maintenance, machine, and welding shops; high bay assembly shop, chemical cleaning room (decontamination). Details of sliding door hoods. Approved by INEEL Classification Office for public release. Ralph M. Parsons 1299-5-ANP/GE-3-607-A 109. Date: August 1956. INEEL index code no. 034-0607-00-693-107169 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

7. Credit USAF, 1945. Original housed in the Muroc Flight ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Credit USAF, 1945. Original housed in the Muroc Flight Test Base, Unit History, 1 September 1942 30 June 1945. Alfred F. Simpson Historical Research Agency. United States Air Force. Maxwell AFB, Alabama. Interior view in shop wing on south side of hangar. Original caption reads "7 Sept. 1945, BH-10, Hangar No. 4 4505 Machine Shop." - Edwards Air Force Base, North Base, Hangar, End of North Base Road, Boron, Kern County, CA

Risk factors associated with purchasing pesticide from shops for self-poisoning: a protocol for a population-based case–control study

PubMed Central

Weerasinghe, Manjula; Konradsen, Flemming; Eddleston, Michael; Pearson, Melissa; Gunnell, David; Hawton, Keith; Jayamanne, Shaluka; Pabasara, Chathurani; Jayathilaka, Tharidu; Dissanayaka, Kalpani; Rajapaksha, Sandamali; Thilakarathna, Prasanna; Agampodi, Suneth

2015-01-01

Introduction Pesticide self-poisoning is one of the most frequently used methods of suicide worldwide, killing over 300 000 people annually. Around 15–20% of pesticide self-poisonings occur soon after the person has bought the pesticide from a shop. We aim to determine the characteristics of individuals who purchase pesticides directly from shops and how they differ from individuals who access pesticides from other sources such as home, home garden or farmland. This information will help inform possible vendor/shop-based intervention strategies aimed at reducing access to pesticides used for self-harm. Methods and analysis This study will investigate risk factors associated with purchasing pesticides for acts of self-poisoning from pesticide shops, including cases identified over a 9-month period using a population-based case–control group approach. Four interviewer-administered data collection tools will be used for this study: a semistructured questionnaire, Beck Suicidal Intent Scale (SIS), Clinical Interview Schedule—Sinhalese version (CIS-Sn) and Alcohol Use Disorders Identification Test (AUDIT). Each case (expected n=33) will be compared with two groups of individuals: (1) those who have self-poisoned using pesticides from the home, home garden or farmland and (2) those who bought pesticides from the same shops as the above cases, but not did not self-poison. Logistic regression models will be used to identify risk factors of purchasing pesticides for self-poisoning from shops. Ethics and dissemination The study has received ethical approval from the Ethical Review Committee of the Faculty of Medicine and Allied Sciences, Rajarata University of Sri Lanka. A sensitive data collection technique will be used and ethical issues will be considered throughout the study. Results will be disseminated in scientific peer-reviewed articles. PMID:25995242

Craftsmen in the Wood Model Shop at the Lewis Flight Propulsion Laboratory

NASA Image and Video Library

1953-01-21

Craftsmen work in the wood model shop at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. The Fabrication Division created almost all of the equipment and models used at the laboratory. The Fabrication Shop building contained a number of specialized shops in the 1940s and 1950s. These included a Machine Shop, Sheet Metal Shop, Wood Model and Pattern Shop, Instrument Shop, Thermocouple Shop, Heat Treating Shop, Metallurgical Laboratory, and Fabrication Office. The Wood Model and Pattern Shop created everything from control panels and cabinets to aircraft models molds for sheet metal work.

Preliminary evaluation, using passive tubes, of carbon monoxide concentrations in outdoor and indoor air at street level shops in Genoa (Italy)

NASA Astrophysics Data System (ADS)

Valerio, Federico; Pala, Mauro; Lazzarotto, Anna; Balducci, Daniele

Preliminary information on carbon monoxide (CO) concentrations (exposure time: 8 h) both inside and outside 38 randomly selected shops situated on four heavy traffic streets of Genoa was obtained using passive diffusion tubes. Reproducibility and accuracy of this analytical method were tested in real outdoor urban conditions and found within 25%; the detection limit was 1 mgm -3 of CO. The highest mean CO concentrations (15.8 ± 2.2 mgm -3) were found inside shops on Balbi street, a narrow "canyon street". Only in two small shops and two bars (both with many smokers) and in a delicatessen, were indoor CO concentrations significantly higher than outdoor values. The mean outdoor CO concentrations (mgm -3) along the four streets considered (XX Settembre, Balbi, Rolando, Fillak) were 7.4 ± 2.2; 14.5 ± 8.7; 5.8 ± 0.4; 10.5 ± 3.7, respectively. No statistical difference was found, comparing the mean indoor CO concentration with the mean CO outdoor value, measured simultaneously along the sidewalks of each street. CO concentrations in 10 shops without smokers and the nearest outdoor measurements were linearly correlated ( r = 0.99; p < 0.0001). No statistically significant difference was found comparing indoor CO pollution in shops with smokers (CO: 8.0 ± 5.4) to those without smokers (CO: 7.1 ± 4.6). Forced ventilation, with air intake far from traffic, proved effective in some specific situations in reducing indoor CO concentrations.

16. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to south (90mm lens). Note the large segmental-arched doorway to move locomotives in and out of Machine Shop. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

14. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to north (90mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

12. Interior, Blacksmith Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Interior, Blacksmith Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northwest (90mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Factors influencing choice of care-seeking for acute fever comparing private chemical shops with health centres and hospitals in Ghana: a study using case-control methodology.

PubMed

Ansah, Evelyn K; Gyapong, Margaret; Narh-Bana, Solomon; Bart-Plange, Constance; Whitty, Christopher J M

2016-05-25

Several public health interventions to improve management of patients with fever are largely focused on the public sector yet a high proportion of patients seek care outside the formal healthcare sector. Few studies have provided information on the determinants of utilization of the private sector as against formal public sector. Understanding the differences between those who attend public and private health institutions, and their pathway to care, has significant practical implications. The chemical shop is an important source of care for acute fever in Ghana. Case-control methodology was used to identify factors associated with seeking care for fever in the Dangme West District, Ghana. People presenting to health centres, or hospital outpatients, with a history or current fever were compared to counterparts from the same community with fever visiting a chemical shop. Of 600 patients, 150 each, were recruited from the district hospital and two health centres, respectively, and 300 controls from 51 chemical shops. Overall, 103 (17.2 %) patients tested slide positive for malaria. Specifically, 13.7 % (41/300) of chemical shop patients, 30.7 % (46/150) health centre and 10.7 % (16/150) hospital patients were slide positive. While it was the first option for care for 92.7 % (278/300) chemical shop patients, 42.7 % (64/150) of health centre patients first sought care from a chemical shop. More health centre patients (61.3 %; 92/150) presented with fever after more than 3 days than chemical shop patients (27.7 %; 83/300) [AOR = 0.19; p < 0.001 CI 0.11-0.30]. Although the hospital was the first option for 83.3 % (125/150) of hospital patients, most (63.3 %; 95/150) patients arrived there over 3 days after their symptoms begun. Proximity was significantly associated with utilization of each source of care. Education, but not other socioeconomic or demographic factors were significantly associated with chemical shop use. The private drug retail sector is the first option for the majority of patients, including poorer patients, with fever in this setting. Most patients with fever arrive at chemical shops with less delay and fewer signs of severity than at public health facilities. Improving chemical shop skills is a good opportunity to diagnose, treat or refer people with fever early.

KSC-04pd2086

NASA Image and Video Library

2004-10-05

KENNEDY SPACE CENTER, FLA. - Inside the KSC Engine Shop, Boeing-Rocketdyne technicians attach an overhead crane to the container enclosing the third Space Shuttle Main Engine for Discovery’s Return to Flight mission STS-114 arrives at the KSC Engine Shop aboard a trailer. The engine is returning from NASA’s Stennis Space Center in Mississippi where it underwent a hot fire acceptance test. Typically, the engines are installed on an orbiter in the Orbiter Processing Facility approximately five months before launch.

A&M. TAN607. Elevation for secondphase expansion of A&M Building. Work ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Elevation for second-phase expansion of A&M Building. Work areas south of the Carpentry Shop. High-bay shop, decontamination room at south-most end. Approved by INEEL Classification Office for public release. Ralph M. Parsons 1299-5-ANP/GE-3-607-A 106. Date: August 1956. INEEL index code no. 034-0607-00-693-107166 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

3. Credit PSR. This view looks south southwest (206°) at ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Credit PSR. This view looks south southwest (206°) at the north and east elevations. The large wing dominating this view contains a machine shop and other facilities used to build or maintain test equipment. A small gasoline facility for automobiles was formerly located near the east end of the building; it was removed in 1995. - Jet Propulsion Laboratory Edwards Facility, Administration & Shops Building, Edwards Air Force Base, Boron, Kern County, CA

The effect of mystery shopper reports on age verification for tobacco purchases.

PubMed

Krevor, Brad S; Ponicki, William R; Grube, Joel W; DeJong, William

2011-09-01

Mystery shops involving attempted tobacco purchases by young buyers have been implemented in order to monitor retail stores' performance in refusing underage sales. Anecdotal evidence suggests that mystery shop visits with immediate feedback to store personnel can improve age verification. This study investigated the effect of monthly and twice-monthly mystery shop reports on age verification. Mystery shoppers visited 45 Walgreens stores 20 times. The stores were randomly assigned to 1 of 3 conditions. Control group stores received no feedback, whereas 2 treatment groups received feedback communications on every visit (twice monthly) or on every second visit (monthly) after baseline. Logit regression models tested whether each treatment group improved verification rates relative to the control group. Postbaseline verification rates were higher in both treatment groups than in the control group, but only the stores receiving monthly communications had a significantly greater improvement compared with the control group stores. Verification rates increased significantly during the study period for all 3 groups, with delayed improvement among control group stores. Communication between managers regarding the mystery shop program may account for the delayed age-verification improvements observed in the control group stores. Encouraging interstore communication might extend the benefits of mystery shop programs beyond those stores that receive this intervention. Copyright © Taylor & Francis Group, LLC

Fabrication Division Staff in the Machine Shop

NASA Image and Video Library

1946-07-21

Machine Shop technicians in the Technical Service Building at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. The 260-person Fabrication Division, led by Dan White and John Dalgleish, created almost all of the equipment and models used at the laboratory. The Technical Services Building, referred to as the Fab Shop, contained a number of specialized shops in the 1940s and 1950s. These included a Machine Shop, Sheet Metal Shop, Wood and Pattern Shop, Instrument Shop, Thermocouple Shop, Heat Treating Shop, Metallurgical Laboratory, and Fabrication Office. The Machine Shop fabricated specialized research equipment not commercially available. During World War II these technicians produced high-speed cameras for combustion research, impellers and other supercharger components, and key equipment for the lab’s first supersonic wind tunnel. The Wood and Pattern Shop created everything from control panels and cabinets to aircraft model molds for sheet metal work. The Sheet Metal Shop had the ability to work with 0.01 to 4-inch thick steel plates. The Instrument Shop specialized in miniature parts and instrumentation, while the Thermocouple Shop standardized the installation of pitot tubes and thermocouples.

A parent advice package for family shopping trips: development and evaluation1

PubMed Central

Clark, Hewitt B.; Greene, Brandon F.; Macrae, John W.; McNees, M. Patrick; Davis, Jerry L.; Risley, Todd R.

1977-01-01

This article reports on the primary steps in the development of parent advice for popular dissemination: (a) developing advice for one specific problem situation, family shopping trips; (b) testing the advice program for benefit to children and convenience to adults; and (c) packaging the advice so it can be used successfully by interested parents. Systematic observation of 12 families using the written advice package on shopping trips revealed its effectiveness in reducing child disruptions and increasing positive interactions between parents and children. These findings, along with interview information from families, showed that the package is usable, effective, and popular with both parents and children, and thus is ready for dissemination to a wide audience of parents—a step that in itself should involve research and evaluation. PMID:16795570

AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP OFFICE AND SOUTH WING. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

Criterion-Referenced Test Items for Small Engines.

ERIC Educational Resources Information Center

Herd, Amon

This notebook contains criterion-referenced test items for testing students' knowledge of small engines. The test items are based upon competencies found in the Missouri Small Engine Competency Profile. The test item bank is organized in 18 sections that cover the following duties: shop procedures; tools and equipment; fasteners; servicing fuel…

Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

PubMed

Serfas, Benjamin G; Büttner, Oliver B; Florack, Arnd

2014-01-01

The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP OFFICE AND SOUTH WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

2. VIEW SOUTHWESTNORTH ELEVATION OF BOILER SHOP SECTION OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW SOUTHWEST-NORTH ELEVATION OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

6. VIEW WESTINTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW WEST-INTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

7. VIEW EASTINTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW EAST-INTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

8. VIEW EASTINTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. VIEW EAST-INTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

9. VIEW WESTINTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. VIEW WEST-INTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

3. VIEW SOUTHNORTH ELEVATION OF BLACKSMITH SHOP SECTION OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW SOUTH-NORTH ELEVATION OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

Efficiently Distributing Component-Based Applications Across Wide-Area Environments

DTIC Science & Technology

2002-01-01

Oracle 8.1.7 Enterprise Edition), each running on a dedicated 1GHz dual-processor Pentium III workstation. For the RUBiS tests, we used a MySQL 4.0.12...a variety of sophisticated network-accessible services such as e-mail, banking, on-line shopping, entertainment, and serv - ing as a data exchange...Beans Catalog Handles read-only queries to product database Customer Serves as a façade to Order and Account Stateful Session Beans ShoppingCart

8. Credit USAF, ca. 1945. Original housed in the Muroc ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. Credit USAF, ca. 1945. Original housed in the Muroc Flight Test Base, Unit History, 1 September 1942 - 30 June 1945. Alfred F. Simpson Historical Research Agency. United States Air Force. Maxwell AFB, Alabama. View of concrete base for jet engine rotor balancing machine. Location where photograph was taken not determined, but presumed to be in shops of Building 4505 which had a sizeable machine shop. - Edwards Air Force Base, North Base, Hangar, End of North Base Road, Boron, Kern County, CA

Minimizing makespan in a two-stage flow shop with parallel batch-processing machines and re-entrant jobs

NASA Astrophysics Data System (ADS)

Huang, J. D.; Liu, J. J.; Chen, Q. X.; Mao, N.

2017-06-01

Against a background of heat-treatment operations in mould manufacturing, a two-stage flow-shop scheduling problem is described for minimizing makespan with parallel batch-processing machines and re-entrant jobs. The weights and release dates of jobs are non-identical, but job processing times are equal. A mixed-integer linear programming model is developed and tested with small-scale scenarios. Given that the problem is NP hard, three heuristic construction methods with polynomial complexity are proposed. The worst case of the new constructive heuristic is analysed in detail. A method for computing lower bounds is proposed to test heuristic performance. Heuristic efficiency is tested with sets of scenarios. Compared with the two improved heuristics, the performance of the new constructive heuristic is superior.

13. Interior detail, Blacksmith Shop, showing a portion of the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Interior detail, Blacksmith Shop, showing a portion of the original overhead belt drive system that powered machine tools in the adjacent Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to west, 135mm lens. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Measurement of self-evaluative motives: a shopping scenario.

PubMed

Wajda, Theresa A; Kolbe, Richard; Hu, Michael Y; Cui, Annie Peng

2008-08-01

To develop measures of consumers' self-evaluative motives of Self-verification, Self-enhancement, and Self-improvement within the context of a mall shopping environment, an initial set of 49 items was generated by conducting three focus-group sessions. These items were subsequently converted into shopping-dependent motive statements. 250 undergraduate college students responded on a 7-point scale to each statement as these related to the acquisition of recent personal shopping goods. An exploratory factor analysis yielded five factors, accounting for 57.7% of the variance, three of which corresponded to the Self-verification motive (five items), Self-enhancement motive (three items), and Self-improvement motive (six items). These 14 items, along with 9 reconstructed items, yielded 23 items retained and subjected to additional testing. In a final round of data collection, 169 college students provided data for exploratory factor analysis. 11 items were used in confirmatory factor analysis. Analysis indicated that the 11-item scale adequately captured measures of the three self-evaluative motives. However, further data reduction produced a 9-item scale with marked improvement in statistical fit over the 11-item scale.

5. VIEW EASTOPENING IN WEST ELEVATION OF BLACKSMITH SHOP SECTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW EAST-OPENING IN WEST ELEVATION OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

Eyes Wide Shopped: Shopping Situations Trigger Arousal in Impulsive Buyers

PubMed Central

Serfas, Benjamin G.; Büttner, Oliver B.; Florack, Arnd

2014-01-01

The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures. PMID:25489955

Household Everyday Functioning in the Internet Age: Online Shopping and Banking Skills Are Affected in HIV-Associated Neurocognitive Disorders.

PubMed

Woods, Steven Paul; Iudicello, Jennifer E; Morgan, Erin E; Verduzco, Marizela; Smith, Tyler V; Cushman, Clint

2017-08-01

The Internet is a fundamental tool for completing many different instrumental activities of daily living (IADL), including shopping and banking. Persons with HIV-associated Neurocognitive Disorders (HAND) are at heightened risk for IADL problems, but the extent to which HAND interferes with the performance of Internet-based household IADLs is not known. Ninety-three individuals with HIV disease, 43 of whom were diagnosed with HAND, and 42 HIV- comparison participants completed Internet-based tests of shopping and banking. Participants used mock credentials to log in to an experimenter-controlled Web site and independently performed a series of typical online shopping (e.g., purchasing household goods) and banking (e.g., transferring funds between accounts) tasks. Individuals with HAND were significantly more likely to fail the online shopping task than neurocognitively normal HIV+ and HIV- participants. HAND was also associated with poorer overall performance versus HIV+ normals on the online banking task. In the HAND group, Internet-based task scores were correlated with episodic memory, executive functions, motor skills, and numeracy. In the HIV+ sample as a whole, lower Internet-based task scores were uniquely associated with poorer performance-based functional capacity and self-reported declines in shopping and financial management in daily life, but not with global manifest functional status. Findings indicate that HAND is associated with difficulties in using the Internet to complete important household everyday functioning tasks. The development and validation of effective Internet training and compensatory strategies may help to improve the household management of persons with HAND. (JINS, 2017, 23, 605-615).

Acceptance Test Procedure for New Pumping Instrumentation and Control Skid Q

DOE Office of Scientific and Technical Information (OSTI.GOV)

KOCH, M.R.

2000-03-27

This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''Q''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP, VIEW TO SOUTHEAST. THE PAINT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP, VIEW TO SOUTHEAST. THE PAINT SHOP WAS LOCATED IN THE CLOSEST CORNER OF THE BUILDING. THE SHEET METAL SHOP WAS LOCATED IN THE CORNER OF THE BUILDING ON THE RIGHT. THE RIGGERS LOFT WAS LOCATED IN THE PORTION OF THE BUILDING OUT OF VIEW TO THE LEFT - Rosie the Riveter National Historical Park, Riggers Loft/Paint Shop/Sheet Metal Shop, 1322 Canal Boulevard, Richmond, Contra Costa County, CA

Impeller Creation at the Fabrication Shop

NASA Image and Video Library

1950-10-21

A mechanic and apprentice work on a wooden impeller in the Fabrication Shop at the NACA Lewis Flight Propulsion Laboratory. The 260-person Fabrication Division created almost all of the equipment and models used at the laboratory. The Technical Services Building, referred to as the “Fab Shop”, contained a number of specialized shops in the 1940s and 1950s. These included a Machine Shop, Sheet Metal Shop, Wood and Pattern Shop, Instrument Shop, Thermocouple Shop, Heat Treating Shop, Metallurgical Laboratory, and Fabrication Office. The Machine Shop fabricated research equipment not commercially available. During World War II these technicians produced high-speed cameras for combustion research, impellers and other supercharger components, and key equipment for the lab’s first supersonic wind tunnel. The Wood and Pattern Shop created everything from control panels and cabinets to aircraft model molds for sheet metal work. The Sheet Metal Shop had the ability to work with 0.01 to 4-inches thick steel plates. The Instrument Shop specialized in miniature parts and instrumentation, while the Thermocouple Shop standardized the installation of pitot tubes and thermocouples. The Metallurgical Laboratory contained a control lab for the Heat Treating Shop and a service lab for the NACA Lewis research divisions. The Heat Treating Shop heated metal parts to optimize their physical properties and contained a Precision Castings Foundry to manufacture equipment made of heat resisting alloys.

Head shop compound abuse amongst attendees of the Drug Treatment Centre Board.

PubMed

McNamara, S; Stokes, S; Coleman, N

2010-05-01

The use of "Head Shop" compounds has received much media attention lately. There is very little research in the current literature with regard to the extent of the usage of these substances amongst the drug using population in Ireland. We conducted a study to examine the extent of the usage of Mephedrone, Methylone and BZP amongst attendees of Methadone maintenance programs at the DTCB. Two hundred and nine samples in total were tested. The results showed significant usage of these compounds amongst this cohort of drug users, with 29 (13.9%) of samples tested being positive for Mephedrone, 7 (3.3%) positive for Methylone and 1 (0.5%) positive for BZP.

1. GENERAL PERSPECTIVE VIEW FACING WEST SHOWING ERECTING SHOP ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL PERSPECTIVE VIEW FACING WEST SHOWING ERECTING SHOP ON RIGHT, FOLLOWED BY THE MACHINE SHOP NO. 1, STOREHOUSE, AND MACHINE SHOP NO. 2 - Juniata Shops, Erecting Shop, East of Fourth Avenue at Third Street, Altoona, Blair County, PA

NASA Tech Briefs, October 2006

NASA Technical Reports Server (NTRS)

2006-01-01

Topics covered include: Protein Sensors Based on Optical Ring Resonators; Phase Sensor for Aligning a Segmented Telescope Mirror; Control Software for Advanced Video Guidance Sensor; Generating Control Commands From Gestures Sensed by EMG; Multiple-Flat-Panel System Displays Multidimensional Data; 3D X-Ray Luggage-Screening System; Probe Station and Near-Field Scanner for Testing Antennas; Photodetector Arrays for Multicolor Visible/Infrared Imaging; Semiconductor Bolometers Give Background-Limited Performance; Multichannel X-Band Dielectric-Resonator Oscillator; Automatic Alignment of Displacement-Measuring Interferometer; Earth Observing System Data Gateway; Power User Interface; Mercury Shopping Cart Interface; Cassini Archive Tracking System; Architecture Adaptive Computing Environment; Computing Fault Displacements from Surface Deformations; Oxygen-Permeable, Hydrophobic Membranes of Silanized alpha-Al2O3; SiC Composite Turbine Vanes; Retaining Device for the Interior Structure of a Spacecraft Payload; Tool for Torquing Circular Electrical-Connector Collars; System for Continuous Deaeration of Hydraulic Oil; Solar-Powered Cooler and Heater for an Automobile Interior; Improved Oxygen-Beam Texturing of Glucose-Monitoring Optics; Tool for Two Types of Friction Stir Welding; Stationary Apparatus Would Apply Forces of Walking to Feet; Instrument Would Detect and Collect Biological Aerosols; Boundary Condition for Modeling Semiconductor Nanostructures; Miniature Distillation Column for Producing LOX From Air; Even Illumination from Fiber-Optic-Coupled Laser Diodes; Optically Driven Deformable Mirrors; Algorithm for Automated Detection of Edges of Clouds; Exploiting Quantum Resonance to Solve Combinatorial Problems; Hybrid Terrain Database; On Release of Microbe-Laden Particles from Mars Landers; A Concept for Run-Time Support of the Chapel Language; Thermoelectric Inhomogeneities in (Ag(sub 1-y)SbTe2)(sub x)(PbTe)(sub 1-x); and Spacecraft Escape Capsule.

Evolution of surface characteristics in material removal simulation with subaperture tools

NASA Astrophysics Data System (ADS)

Kim, Sug-Whan; Jee, Myung-Kook

2002-02-01

Over the last decade, we have witnessed that the fabrication of 200 - 2000 mm scale have received relatively little attention from the fabrication technology development, compared to those of smaller than 200 mm and of larger than 2000 mm in diameter. As a result, the optical surfaces of these scales are still predominantly completed by small optics shops where opticians apply the traditional technique for polishing. Lack of tools in aiding opticians for planning, executing and analyzing their polishing work is a root cause for long and, sometimes, unpredictable delivery and high manufacturing cost for such optical surfaces. We present the on-going development of a software simulation environment called Surface Analysis and Fabrication Environment (SAFE). It is primarily intended to increase the throughput of polishing and testing cycles by allowing opticians to simulate the resulting surface form and roughness with input polishing variables. A brief review of current polishing techniques and their target optics clarifies the need for such simulation tool. This is followed by the development targets and a preliminary simulation plan using the developmental version of SAFE. Among many polishing variables, two removal assumptions and three different types of removal functions we used for the polishing simulation presented. The simulations show that the Gaussian removal function with the proportional removal assumption resulted in the fastest, though marginal, convergence to a super-polished surface of 0.56 micron Peat- to-Valley in form accuracy and of 0.02 nanometer in surface roughness Ra. Other meaningful results and their implications are also presented.

18. Interior detail, drill press and grinder, Machine Shop, Roundhouse ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Interior detail, drill press and grinder, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to east (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

19. Interior detail, grinder and drill press, Machine Shop, Roundhouse ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. Interior detail, grinder and drill press, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to south (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Spinoff 2010

NASA Technical Reports Server (NTRS)

2010-01-01

Topics covered include: Burnishing Techniques Strengthen Hip Implants; Signal Processing Methods Monitor Cranial Pressure; Ultraviolet-Blocking Lenses Protect, Enhance Vision; Hyperspectral Systems Increase Imaging Capabilities; Programs Model the Future of Air Traffic Management; Tail Rotor Airfoils Stabilize Helicopters, Reduce Noise; Personal Aircraft Point to the Future of Transportation; Ducted Fan Designs Lead to Potential New Vehicles; Winglets Save Billions of Dollars in Fuel Costs; Sensor Systems Collect Critical Aerodynamics Data; Coatings Extend Life of Engines and Infrastructure; Radiometers Optimize Local Weather Prediction; Energy-Efficient Systems Eliminate Icing Danger for UAVs; Rocket-Powered Parachutes Rescue Entire Planes; Technologies Advance UAVs for Science, Military; Inflatable Antennas Support Emergency Communication; Smart Sensors Assess Structural Health; Hand-Held Devices Detect Explosives and Chemical Agents; Terahertz Tools Advance Imaging for Security, Industry; LED Systems Target Plant Growth; Aerogels Insulate Against Extreme Temperatures; Image Sensors Enhance Camera Technologies; Lightweight Material Patches Allow for Quick Repairs; Nanomaterials Transform Hairstyling Tools; Do-It-Yourself Additives Recharge Auto Air Conditioning; Systems Analyze Water Quality in Real Time; Compact Radiometers Expand Climate Knowledge; Energy Servers Deliver Clean, Affordable Power; Solutions Remediate Contaminated Groundwater; Bacteria Provide Cleanup of Oil Spills, Wastewater; Reflective Coatings Protect People and Animals; Innovative Techniques Simplify Vibration Analysis; Modeling Tools Predict Flow in Fluid Dynamics; Verification Tools Secure Online Shopping, Banking; Toolsets Maintain Health of Complex Systems; Framework Resources Multiply Computing Power; Tools Automate Spacecraft Testing, Operation; GPS Software Packages Deliver Positioning Solutions; Solid-State Recorders Enhance Scientific Data Collection; Computer Models Simulate Fine Particle Dispersion; Composite Sandwich Technologies Lighten Components; Cameras Reveal Elements in the Short Wave Infrared; Deformable Mirrors Correct Optical Distortions; Stitching Techniques Advance Optics Manufacturing; Compact, Robust Chips Integrate Optical Functions; Fuel Cell Stations Automate Processes, Catalyst Testing; Onboard Systems Record Unique Videos of Space Missions; Space Research Results Purify Semiconductor Materials; and Toolkits Control Motion of Complex Robotics.

46 CFR 58.30-35 - Testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... components thereof shall be tested as required by this section. (b) Accumulators constructed as pressure... associated equipment components, including hydraulic steering gear, in lieu of being tested at the time of installation, may be shop tested by the manufacturer to 11/2 times the maximum allowable pressure of the system...

46 CFR 58.30-35 - Testing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... components thereof shall be tested as required by this section. (b) Accumulators constructed as pressure... associated equipment components, including hydraulic steering gear, in lieu of being tested at the time of installation, may be shop tested by the manufacturer to 11/2 times the maximum allowable pressure of the system...

46 CFR 58.30-35 - Testing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... components thereof shall be tested as required by this section. (b) Accumulators constructed as pressure... associated equipment components, including hydraulic steering gear, in lieu of being tested at the time of installation, may be shop tested by the manufacturer to 11/2 times the maximum allowable pressure of the system...

46 CFR 58.30-35 - Testing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... components thereof shall be tested as required by this section. (b) Accumulators constructed as pressure... associated equipment components, including hydraulic steering gear, in lieu of being tested at the time of installation, may be shop tested by the manufacturer to 11/2 times the maximum allowable pressure of the system...

46 CFR 58.30-35 - Testing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... components thereof shall be tested as required by this section. (b) Accumulators constructed as pressure... associated equipment components, including hydraulic steering gear, in lieu of being tested at the time of installation, may be shop tested by the manufacturer to 11/2 times the maximum allowable pressure of the system...

7. ROCKET SLED ON DECK OF TEST STAND 15. Photo ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. ROCKET SLED ON DECK OF TEST STAND 1-5. Photo no. "6085, G-EAFB-16 SEP 52." Looking south to machine shop. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-5, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

Comparative testing of radiographic testing, ultrasonic testing and phased array advanced ultrasonic testing non destructive testing techniques in accordance with the AWS D1.5 bridge welding code.

DOT National Transportation Integrated Search

2014-02-01

A comprehensive body of non-destructive testing data was collected from steel bridge welds under real-world conditions in a fabricators shop. Three different non-destructive testing (NDT) techniques were used on each weld inspection, these being R...

Use of malaria RDTs in various health contexts across sub-Saharan Africa: a systematic review.

PubMed

Boyce, Matthew R; O'Meara, Wendy P

2017-05-18

The World Health Organization recommends parasitological confirmation of malaria prior to treatment. Malaria rapid diagnostic tests (RDTs) represent one diagnostic method that is used in a variety of contexts to overcome limitations of other diagnostic techniques. Malaria RDTs increase the availability and feasibility of accurate diagnosis and may result in improved quality of care. Though RDTs are used in a variety of contexts, no studies have compared how well or effectively RDTs are used across these contexts. This review assesses the diagnostic use of RDTs in four different contexts: health facilities, the community, drug shops and schools. A comprehensive search of the Pubmed database was conducted to evaluate RDT execution, test accuracy, or adherence to test results in sub-Saharan Africa. Original RDT and Plasmodium falciparum focused studies conducted in formal health care facilities, drug shops, schools, or by CHWs between the year 2000 and December 2016 were included. Studies were excluded if they were conducted exclusively in a research laboratory setting, where staff from the study team conducted RDTs, or in settings outside of sub-Saharan Africa. The literature search identified 757 reports. A total of 52 studies were included in the analysis. Overall, RDTs were performed safely and effectively by community health workers provided they receive proper training. Analogous information was largely absent for formal health care workers. Tests were generally accurate across contexts, except for in drug shops where lower specificities were observed. Adherence to RDT results was higher among drug shop vendors and community health workers, while adherence was more variable among formal health care workers, most notably with negative test results. Malaria RDTs are generally used well, though compliance with test results is variable - especially in the formal health care sector. If low adherence rates are extrapolated, thousands of patients may be incorrectly diagnosed and receive inappropriate treatment resulting in a low quality of care and unnecessary drug use. Multidisciplinary research should continue to explore determinants of good RDT use, and seek to better understand how to support and sustain the correct use of this diagnostic tool.

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

Employee and customer handling of nicotine-containing e-liquids in vape shops.

PubMed

Garcia, Robert; Allem, Jon Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer Beth; Sussman, Steve

2016-01-01

Vape shops sell electronic cigarettes and related products such as e-liquids, which may contain nicotine. Direct contact with nicotine can lead to adverse health effects, and few regulations exist on how nicotine is handled in vape shops. This study examined how customers and employees come into contact with, and handle, nicotine-containing e-liquids in vape shops with the goal of informing potential future regulation of nicotine handling in vape shops. Data were collected from 77 vape shops in the Los Angeles basin. Characteristics of the shops were documented by employee interviews and in store observations. Data collection was focused on shops located in areas with high concentrations of communities of interest; 20 shops from African-American communities, 17 from Hispanic communities, 18 from Korean communities, and 22 from non-Hispanic White communities. Half of the vape shops allowed customers to sample e-liquids with nicotine. Most of the shops (83%) provided self-service sampling stations for customers. A majority of shop employees (72%) reported that spills of e-liquids containing nicotine had occurred in the past. While 64% of the shops provided safety equipment, only 34% provided equipment for proper nicotine handling. Furthermore, 62% of shop employees reported handling nicotine without gloves or other safety equipment. Regulation on the handling of nicotine by customers and vape shop employees is important to prevent unsafe practices and subsequent injury. The frequent occurrence of spills and limited availability of safety equipment in vape shops highlights the need for the creation and enforcement of regulations to protect employees and customers. Appropriate safety training and equipment should be provided to employees to prevent accidental exposure to nicotine. Information on ways to safely handle nicotine should be communicated to vape shop employees and customers.

Employee and customer handling of nicotine-containing e-liquids in vape shops

PubMed Central

Garcia, Robert; Allem, Jon Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer Beth; Sussman, Steve

2017-01-01

INTRODUCTION Vape shops sell electronic cigarettes and related products such as e-liquids, which may contain nicotine. Direct contact with nicotine can lead to adverse health effects, and few regulations exist on how nicotine is handled in vape shops. This study examined how customers and employees come into contact with, and handle, nicotine-containing e-liquids in vape shops with the goal of informing potential future regulation of nicotine handling in vape shops. METHODS Data were collected from 77 vape shops in the Los Angeles basin. Characteristics of the shops were documented by employee interviews and in store observations. Data collection was focused on shops located in areas with high concentrations of communities of interest; 20 shops from African-American communities, 17 from Hispanic communities, 18 from Korean communities, and 22 from non-Hispanic White communities. RESULTS Half of the vape shops allowed customers to sample e-liquids with nicotine. Most of the shops (83%) provided self-service sampling stations for customers. A majority of shop employees (72%) reported that spills of e-liquids containing nicotine had occurred in the past. While 64% of the shops provided safety equipment, only 34% provided equipment for proper nicotine handling. Furthermore, 62% of shop employees reported handling nicotine without gloves or other safety equipment. CONCLUSIONS Regulation on the handling of nicotine by customers and vape shop employees is important to prevent unsafe practices and subsequent injury. The frequent occurrence of spills and limited availability of safety equipment in vape shops highlights the need for the creation and enforcement of regulations to protect employees and customers. Appropriate safety training and equipment should be provided to employees to prevent accidental exposure to nicotine. Information on ways to safely handle nicotine should be communicated to vape shop employees and customers. PMID:28660255

Risk factors associated with purchasing pesticide from shops for self-poisoning: a protocol for a population-based case-control study.

PubMed

Weerasinghe, Manjula; Konradsen, Flemming; Eddleston, Michael; Pearson, Melissa; Gunnell, David; Hawton, Keith; Jayamanne, Shaluka; Pabasara, Chathurani; Jayathilaka, Tharidu; Dissanayaka, Kalpani; Rajapaksha, Sandamali; Thilakarathna, Prasanna; Agampodi, Suneth

2015-05-20

Pesticide self-poisoning is one of the most frequently used methods of suicide worldwide, killing over 300,000 people annually. Around 15-20% of pesticide self-poisonings occur soon after the person has bought the pesticide from a shop. We aim to determine the characteristics of individuals who purchase pesticides directly from shops and how they differ from individuals who access pesticides from other sources such as home, home garden or farmland. This information will help inform possible vendor/shop-based intervention strategies aimed at reducing access to pesticides used for self-harm. This study will investigate risk factors associated with purchasing pesticides for acts of self-poisoning from pesticide shops, including cases identified over a 9-month period using a population-based case-control group approach. Four interviewer-administered data collection tools will be used for this study: a semistructured questionnaire, Beck Suicidal Intent Scale (SIS), Clinical Interview Schedule-Sinhalese version (CIS-Sn) and Alcohol Use Disorders Identification Test (AUDIT). Each case (expected n=33) will be compared with two groups of individuals: (1) those who have self-poisoned using pesticides from the home, home garden or farmland and (2) those who bought pesticides from the same shops as the above cases, but not did not self-poison. Logistic regression models will be used to identify risk factors of purchasing pesticides for self-poisoning from shops. The study has received ethical approval from the Ethical Review Committee of the Faculty of Medicine and Allied Sciences, Rajarata University of Sri Lanka. A sensitive data collection technique will be used and ethical issues will be considered throughout the study. Results will be disseminated in scientific peer-reviewed articles. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

ERECTING/MACHINE SHOP, CRANE ACCESS GANGWAY BETWEEN ERECTING (L) AND MACHINE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ERECTING/MACHINE SHOP, CRANE ACCESS GANGWAY BETWEEN ERECTING (L) AND MACHINE (R) SHOPS, LOOKING NORTH. - Southern Pacific, Sacramento Shops, Erecting Shop, 111 I Street, Sacramento, Sacramento County, CA

45 CFR 155.705 - Functions of a SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Functions of a SHOP. 155.705 Section 155.705... Functions: Small Business Health Options Program (SHOP) § 155.705 Functions of a SHOP. (a) Exchange functions that apply to SHOP. The SHOP must carry out all the required functions of an Exchange described in...

45 CFR 155.720 - Enrollment of employees into QHPs under SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Enrollment of employees into QHPs under SHOP. 155... ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.720 Enrollment of employees into QHPs under SHOP. (a) General requirements. The SHOP must process the SHOP single employee...

Southwest electronic one-stop shopping, motor carrier test report

DOT National Transportation Integrated Search

1997-12-22

The Electronic One-Stop System (EOSS) used in this credential test was designed to replace current normal credentialling procedures with a personal computer-based electronic method that allows users to prepare, apply for, and obtain certain types of ...

Southwest electronic one-stop shopping, state agency test report

DOT National Transportation Integrated Search

1997-12-22

The Electronic One-Stop System (EOSS) used in this credential test was designed to replace current normal credentialling procedures with a personal computer-based electronic method that allows users to prepare, apply for, and obtain certain types of ...

VIEW EASTLEFTBUILDING 2 PHYSICAL TESTING HOUSE (1928) RIGHTBUILDING 7 MACHINE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW EAST-LEFT-BUILDING 2 PHYSICAL TESTING HOUSE (1928) RIGHT-BUILDING 7 MACHINE SHOP (1901 SECTION) - John A. Roebling's Sons Company & American Steel & Wire Company, South Broad, Clark, Elmer, Mott & Hudson Streets, Trenton, Mercer County, NJ

Alternative Fuels Data Center

Science.gov Websites

Fuel Economy Test Procedures and Labeling The U.S. Environmental Protection Agency (EPA) is responsible for motor vehicle fuel economy testing. Manufacturers test their own vehicles and report the . To aid consumers shopping for new vehicles, EPA redesigned the fuel economy window sticker posted on

5. NORTH REAR, EAST PART, SHOWING ESCAPE HATCH. TEST STAND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. NORTH REAR, EAST PART, SHOWING ESCAPE HATCH. TEST STAND 1-3 AND ITS MACHINE SHOP ARE IN MIDDLE DISTANCE. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Instrumentation & Control Building, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

MACHINE SHOP, WEST BAY, DETAIL OF COLUMN, BEAM, CRANE RAIL, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MACHINE SHOP, WEST BAY, DETAIL OF COLUMN, BEAM, CRANE RAIL, AND TRUSS CONNECTION TO ERECTING SHOP, LOOKING NORTHWEST. - Southern Pacific, Sacramento Shops, Erecting Shop, 111 I Street, Sacramento, Sacramento County, CA

2007 SB14 Source Reduction Plan/Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, L

2007-07-24

Aqueous solutions (mixed waste) generated from various LLNL operations, such as debris washing, sample preparation and analysis, and equipment maintenance and cleanout, were combined for storage in the B695 tank farm. Prior to combination the individual waste streams had different codes depending on the particular generating process and waste characteristics. The largest streams were CWC 132, 791, 134, 792. Several smaller waste streams were also included. This combined waste stream was treated at LLNL's waste treatment facility using a vacuum filtration and cool vapor evaporation process in preparation for discharge to sanitary sewer. Prior to discharge, the treated waste streammore » was sampled and the results were reviewed by LLNL's water monitoring specialists. The treated solution was discharged following confirmation that it met the discharge criteria. A major source, accounting for 50% for this waste stream, is metal machining, cutting and grinding operations in the engineering machine shops in B321/B131. An additional 7% was from similar operations in B131 and B132S. This waste stream primarily contains metal cuttings from machined parts, machining coolant and water, with small amounts of tramp oil from the machining and grinding equipment. Several waste reduction measures for the B321 machine shop have been taken, including the use of a small point-of-use filtering/tramp-oil coalescing/UV-sterilization coolant recycling unit, and improved management techniques (testing and replenishing) for coolants. The recycling unit had some operational problems during 2006. The machine shop is planning to have it repaired in the near future. A major source, accounting for 50% for this waste stream, is metal machining, cutting and grinding operations in the engineering machine shops in B321/B131. An additional 7% was from similar operations in B131 and B132S. This waste stream primarily contains metal cuttings from machined parts, machining coolant and water, with small amounts of tramp oil from the machining and grinding equipment. Several waste reduction measures for the B321 machine shop have been taken, including the use of a small point-of-use filtering/tramp-oil coalescing/UV-sterilization coolant recycling unit, and improved management techniques (testing and replenishing) for coolants. The recycling unit had some operational problems during 2006. The machine shop is planning to have it repaired in the near future. Quarterly waste generation data prepared by the Environmental Protection Department's P2 Team are regularly provided to engineering shops as well as other facilities so that generators can track the effectiveness of their waste minimization efforts.« less

West elevation of Machine Shop (Bldg. 163) north bay. Boiler ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

West elevation of Machine Shop (Bldg. 163) north bay. Boiler Shop (Bldg. 152) is at left - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

20. MACHINE SHOP, LOOKING SOUTH. SHOP IS EQUIPPED WITH A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. MACHINE SHOP, LOOKING SOUTH. SHOP IS EQUIPPED WITH A 25-TON SHAW CRANE TO HANDLE PARTS FROM RAIL CARS INTO THE SHOP. MACHINE SHOP HANDLES ALL NECESSARY REPAIR WORK ON THE DOCK MACHINERY. - Pennsylvania Railway Ore Dock, Lake Erie at Whiskey Island, approximately 1.5 miles west of Public Square, Cleveland, Cuyahoga County, OH

5. Northwest elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Northwest elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to southeast (90mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

4. Southwest end, Roundhouse Machine Shop Extension, Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Southwest end, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northeast (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Looking northeast from roof of Machine Shop (Bldg. 163) at ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking northeast from roof of Machine Shop (Bldg. 163) at transfer table pit and Boiler Shop (Bldg. 152) - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

21. VIEW OF AXLE AND WHEEL ASSEMBLY STORAGE AREA, adjacent ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. VIEW OF AXLE AND WHEEL ASSEMBLY STORAGE AREA, adjacent to Erecting Shop and Machine Shop. - Juniata Shops, Erecting Shop & Machine Shop, East of Fourth Avenue, between Fourth & Fifth Streets, Altoona, Blair County, PA

Solving Open Job-Shop Scheduling Problems by SAT Encoding

NASA Astrophysics Data System (ADS)

Koshimura, Miyuki; Nabeshima, Hidetomo; Fujita, Hiroshi; Hasegawa, Ryuzo

This paper tries to solve open Job-Shop Scheduling Problems (JSSP) by translating them into Boolean Satisfiability Testing Problems (SAT). The encoding method is essentially the same as the one proposed by Crawford and Baker. The open problems are ABZ8, ABZ9, YN1, YN2, YN3, and YN4. We proved that the best known upper bounds 678 of ABZ9 and 884 of YN1 are indeed optimal. We also improved the upper bound of YN2 and lower bounds of ABZ8, YN2, YN3 and YN4.

Closure Report for Corrective Action Unit 563: Septic Systems, Nevada Test Site, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Restoration

2010-02-28

Corrective Action Unit (CAU) 563 is identified in the Federal Facility Agreement and Consent Order (FFACO) as “Septic Systems” and consists of the following four Corrective Action Sites (CASs), located in Areas 3 and 12 of the Nevada Test Site: · CAS 03-04-02, Area 3 Subdock Septic Tank · CAS 03-59-05, Area 3 Subdock Cesspool · CAS 12-59-01, Drilling/Welding Shop Septic Tanks · CAS 12-60-01, Drilling/Welding Shop Outfalls Closure activities were conducted from September to November 2009 in accordance with the FFACO (1996, as amended February 2008) and the Corrective Action Plan for CAU 563. The corrective action alternatives includedmore » No Further Action and Clean Closure.« less

Optic neuritis with residual tunnel vision in perchloroethylene toxicity.

PubMed

Onofrj, M; Thomas, A; Paci, C; Rotilio, D

1998-01-01

In a 57-year-old female owner of a dry-cleaning shop, we describe the association of severe bilateral optic neuritis with unexpectedly high concentrations of perchloroethylene/metabolites in the blood and of chloroform in urine. Visual disturbances consisted of complete blindness for 9 days in the left eye, for 11 days in the right eye, with bright phosphenes and pain on eye rotation. Only central (2-3 degrees radius) vision recovered in the following months. Although environmental concentrations of perchloroethylene were within normal limits, we measured five-fold increases in vapors emitted when ironing freshly dry-cleaned fabrics, and suggest that inhalation of perchloroethylene vapors was the cause of this case of ocular nerve toxicity, recapitulating a previous report of major perchloroethylene toxicity.

15. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northeast (90mm lens). The arched cutouts in the bottom chords of the roof trusses were necessary to provide clearance for the smokestacks of steam locomotives, and also mark the location of the former inspection pit in the floor (now filled in and covered by a new concrete floor). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Marketing activities of vape shops across racial/ethnic communities.

PubMed

Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B; Sussman, Steve

2016-01-01

There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community's demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by ethnic composition. Data was gathered in 2014 from a pilot-study on vape shops (n=77) in Los Angeles, which documented the characteristics of shops through employee interviews and in-store observations. Data were collected from shops located in communities that were predominantly, African-American (n=20), Hispanic (n=17), Korean (n=18), or non-Hispanic White (n=22). Sixty-one percent of vape shops had advertisements (print ads and posters) for e-cigarettes and 84% offered discounts. Vape shops in Hispanic communities were more likely to have ethnic specific marketing material compared to shops in other communities. All the shops provided customers with free samples, however those in Korean and non-Hispanic White communities had a significantly higher prevalence of customer accessible free samples. Vape shop marketing practices differed by ethnic community. A large majority of shops provided free samples to their customers, a practice which is now banned by the FDA. It will be important to monitor how vape shops will adjust their marketing strategy because of this ban. Future research should expand on the findings presented here to provide regulators with further crucial information.

9. DETAIL, ROOF VENT HOUSING. NOTE THE TUNNEL TO TEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. DETAIL, ROOF VENT HOUSING. NOTE THE TUNNEL TO TEST STAND 1-3 AT FAR LEFT, AND ITS MACHINE SHOP AT LEFT CENTER. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Instrumentation & Control Building, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

[Chromosome aberration frequency in workers in tire and industrial ruber manufacture].

PubMed

Aleksandrov, S E

1982-01-01

A cytogenetic study was carried out with the view to analyse blood and embryonic tissue cultures taken from female workers of various shops of tyre and rubber industry. In workers of preparation shops the level of chromosome aberrations in blood was equal to 2.63%, while in embryonic tissues the value was 6.33%. The number of aberrations on blood and embryonic tissue exhibited by workers of chemical shops was equal to 1.34 and 2.79%, respectively. No specific differences were observed in the sub-group of women having been in frequent contacts with gasoline or curing gases, as compared with the group on the whole. Curing accelerators which are ingredients of toxic dust in preparation shops of tyre and rubber industry cause a sharp increase in the number of chromosome aberrations both in blood and in the embryonic tissues of women. Data on induced abortions may be used for evaluation of the influence of chemicals on the developing fetus and can serve as a test models of mutagenic and embryotoxic effect. They also may be regarded as a part of the general system of the evaluation of mutagenic effects of chemicals in humans.

6. NORTH END OF MACHINE SHOP. FORGE SHOP (HAER No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. NORTH END OF MACHINE SHOP. FORGE SHOP (HAER No. CA-326-K) ON LEFT, FORD PLANT IN DISTANCE, NE BY 60. - Rosie the Riveter National Historical Park, Machine Shop, 1311 Canal Boulevard, Richmond, Contra Costa County, CA

A&M. TAN607 sections. Section C cuts hot shop on its ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 sections. Section C cuts hot shop on its 160-foot east/west line. Shows tapered shield wall on east and west facades of building. Relationship between hot shop and special equipment service room, cable tracks for overhead bridge crane, location of well. Concrete roof beams. Section D shows similar east/west of cold assembly room 115 and its bridge crane rail. Shows heavy shielding around special services cubicle and height of viewing windows on east and west sides. Rear of building is shown in relationship to the ridge east of the building. Referent drawing is ID-33-E-158 above. Ralph M. Parsons 902-3-ANP-607-A 106. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106758 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

The Associations between Yelp Online Reviews and Vape Shops Closing or Remaining Open One Year Later.

PubMed

Kong, Grace; Unger, Jennifer; Baezconde-Garbanati, Lourdes; Sussman, Steve

2017-01-01

Vape shops are popular brick-and-mortar stores that sell e-cigarette products but are not understood well. Previous analysis of Yelp reviews of vape shops located in various ethnic neighborhoods in Los Angeles, California in 2014 identified characteristics of vape shop as delineated by consumers. In this study, we assessed the associations between these characteristics and vape shops going out of business in 2015. Content analysis of Yelp reviews of 72 vape shops in 2014 identified 1) general characteristics of the reviews/reviewers, 2) vape shop, staff, and marketing attributes, 3) physical environment, and 4) health claims. In 2015, in-person visits confirmed that 22% of these vape shops closed permanently. We analyzed whether characteristics/attributes identified in 2014 associated with stores remaining open (n = 56) or permanently closing (n = 16) in 2015. Univariate findings showed that open vape shops relative to closed shops had greater 1) number of reviews, 2) rebuilds/fixings, 3) ratings of staff attributes as "helpful/patient/respectful," and 4) report of the physical environment as "bar type." Bar type vape shops and those with rebuilding/fixing capabilities were associated with staying open, suggesting the popularity of these attributes. Yelp consumer reviews is a useful research tool to identify consumer-determined important sustaining attributes of vape shops and may be used to identify aspects of enduring shops that need regulations.

Opioid shopping behavior: how often, how soon, which drugs, and what payment method.

PubMed

Cepeda, M Soledad; Fife, Daniel; Chow, Wing; Mastrogiovanni, Gregory; Henderson, Scott C

2013-01-01

Doctor shopping (obtaining opioid prescriptions from multiple prescribers) is one example of opioid abuse and diversion. The authors assessed how soon shopping behavior was observed after opioid exposure, number of events per shopper, preferred opioids, and method of payment. This was a cohort study. Individuals with ≤1 dispensing for any opioid in 2008 were followed for 18 months. Shopping behavior was defined as ≤2 prescriptions by different prescribers with ≤1 day of overlap and filled at ≤3 pharmacies. Of 25,161,024 subjects, 0.30% exhibited shopping behavior. Opioid-experienced subjects were 13.7 times more likely to exhibit shopping behavior and had more shopping episodes than opioid-naive subjects. Time to first shopping event was 246.90 ± 163.61 days. Number of episodes was 2.74 ± 4.66. Most subjects with shopping behavior (55.27%) had 1 shopping episode, whereas 9.52% had ≤6 episodes; 88.99% had ≤4 prescribers. Subjects with shopping behavior filled schedule II opioids more often than subjects without shopping behavior (19.51% vs 10.89%) and more often paid in cash (44.85% vs 18.54%). Three of 1000 people exposed to opioids exhibit shopping behavior, on average, 8 months after exposure. Opioid shoppers seek strong opioids, avoid combination products, often pay cash, and obtain prescriptions from few prescribers. © 2012 The Author(s).

1. AERIAL VIEW OF SHOPS COMPLEX LOOKING EAST SHOWING WEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. AERIAL VIEW OF SHOPS COMPLEX LOOKING EAST SHOWING WEST AND EAST ROUNDHOUSES, FROG AND SWITCH SHOP, AND MACHINE SHOP. - Baltimore & Ohio Railroad, Martinsburg Repair Shops, West Side of Tuscarora Creek Opposite East End of Race Street, Martinsburg, Berkeley County, WV

Technical and Occupational Shops. Volume II.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

The layouts and specifications provided are intended as a guide to school boards, educators, and architects. Drawings and room plans illustrate specifications for girls' occupational shop, graphic arts, carpentry (millwork and building construction shop), boys' occupational shop (mechanical), boys' occupational shop (building construction),…

Marketing activities of vape shops across racial/ethnic communities

PubMed Central

Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B.; Sussman, Steve

2017-01-01

INTRODUCTION There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community’s demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by ethnic composition. METHODS Data was gathered in 2014 from a pilot-study on vape shops (n=77) in Los Angeles, which documented the characteristics of shops through employee interviews and in-store observations. Data were collected from shops located in communities that were predominantly, African-American (n=20), Hispanic (n=17), Korean (n=18), or non-Hispanic White (n=22). RESULTS Sixty-one percent of vape shops had advertisements (print ads and posters) for e-cigarettes and 84% offered discounts. Vape shops in Hispanic communities were more likely to have ethnic specific marketing material compared to shops in other communities. All the shops provided customers with free samples, however those in Korean and non-Hispanic White communities had a significantly higher prevalence of customer accessible free samples. CONCLUSIONS Vape shop marketing practices differed by ethnic community. A large majority of shops provided free samples to their customers, a practice which is now banned by the FDA. It will be important to monitor how vape shops will adjust their marketing strategy because of this ban. Future research should expand on the findings presented here to provide regulators with further crucial information. PMID:29046899

Comparison of the risks of shopping behavior and opioid abuse between tapentadol and oxycodone and association of shopping behavior and opioid abuse.

PubMed

Cepeda, M Soledad; Fife, Daniel; Kihm, Mary A; Mastrogiovanni, Greg; Yuan, Yingli

2014-12-01

This study compared the risks of opioid shopping behavior and opioid abuse between tapentadol immediate release and oxycodone immediate release and, to validate the definition of shopping, examined the association between opioid shopping and opioid abuse further. This retrospective cohort study using linked dispensing and diagnosis databases followed opioid-naive patients for development of shopping behavior and/or opioid abuse during 1 year after initial exposure to tapentadol or oxycodone. Shopping was defined by having overlapping opioid prescriptions from >1 prescriber filled at ≥3 pharmacies; abuse by having International Classification of Diseases, 9th revision diagnoses reflecting opioid abuse, addiction, or dependence. To determine their association, we cross-tabulated shopping and opioid abuse and calculated odds ratios. Risks of developing each outcome were estimated using logistic regression. Among 277,401 participants initiating opioid use with tapentadol (39,524) or oxycodone (237,877), 0.6% developed shopping behavior, 0.75% developed abuse. Higher proportions of patients in the oxycodone group developed shopping behavior and abuse than in the tapentadol group (shopping: adjusted odds ratio [95% confidence interval], 0.45 [0.36-0.55]; abuse: 0.44 [0.37-0.54]). Shopping behavior and abuse were associated; of those with shopping behavior, 6.5% had abuse. Age (18 to 64 y), sex (male), prior benzodiazepine use, paying cash, and history (mood disorders, abuse of nonopioid medications, and back pain) were risk factors for developing either outcome. Shopping behavior and abuse measure complementary, but associated, constructs, which further validates the current definition of shopping. The risk of developing either is lower among patients who initiate opioid use with tapentadol than those who initiate opioid use with oxycodone.

Comparison of the Risks of Shopping Behavior and Opioid Abuse Between Tapentadol and Oxycodone and Association of Shopping Behavior and Opioid Abuse

PubMed Central

Fife, Daniel; Kihm, Mary A.; Mastrogiovanni, Greg; Yuan, Yingli

2014-01-01

Objectives: This study compared the risks of opioid shopping behavior and opioid abuse between tapentadol immediate release and oxycodone immediate release and, to validate the definition of shopping, examined the association between opioid shopping and opioid abuse further. Materials and Methods: This retrospective cohort study using linked dispensing and diagnosis databases followed opioid-naive patients for development of shopping behavior and/or opioid abuse during 1 year after initial exposure to tapentadol or oxycodone. Shopping was defined by having overlapping opioid prescriptions from >1 prescriber filled at ≥3 pharmacies; abuse by having International Classification of Diseases, 9th revision diagnoses reflecting opioid abuse, addiction, or dependence. To determine their association, we cross-tabulated shopping and opioid abuse and calculated odds ratios. Risks of developing each outcome were estimated using logistic regression. Results: Among 277,401 participants initiating opioid use with tapentadol (39,524) or oxycodone (237,877), 0.6% developed shopping behavior, 0.75% developed abuse. Higher proportions of patients in the oxycodone group developed shopping behavior and abuse than in the tapentadol group (shopping: adjusted odds ratio [95% confidence interval], 0.45 [0.36-0.55]; abuse: 0.44 [0.37-0.54]). Shopping behavior and abuse were associated; of those with shopping behavior, 6.5% had abuse. Age (18 to 64 y), sex (male), prior benzodiazepine use, paying cash, and history (mood disorders, abuse of nonopioid medications, and back pain) were risk factors for developing either outcome. Discussion: Shopping behavior and abuse measure complementary, but associated, constructs, which further validates the current definition of shopping. The risk of developing either is lower among patients who initiate opioid use with tapentadol than those who initiate opioid use with oxycodone. PMID:24370606

Effects of Mobile Text Advertising on Consumer Purchase Intention: A Moderated Mediation Analysis.

PubMed

Hongyan, Lin; Zhankui, Chen

2017-01-01

Mobile shopping is increasing in prevalence and has become a necessary part of many people's daily lives. However, one main channel for mobile shopping, mobile shopping applications (apps), has not been thoroughly investigated. This study focused on mobile text advertising delivered from mobile shopping apps using the intention to purchase as the dependent variable for testing its marketing effect. In the context of a promotion focus vs. a prevention focus, we used Higgins' regulatory focus theory combined with Ajzen's TPB and Herzog's U&G to analyze the mechanism by which consumers formulate an intention to purchase in a mobile advertising context. This empirical study surveyed 320 consumers who had made a purchase using a mobile shopping app in the previous month. The results showed that infotainment, irritation, and subjective norms were significantly associated with attitudes; in turn, attitudes mediated the impact of these three factors on the intention to purchase. Moreover, a high promotion focus not only strengthened the positive effect of infotainment on attitudes but also intensified the mediation effect of attitudes between infotainment and the intention to purchase. A high prevention focus also consolidated the negative effect of irritation on attitudes as well as reinforced the mediation effect of attitudes between irritation and the intention to purchase. Furthermore, attitudes, subjective norms, and perceived behavioral control collectively impacted the intention to purchase. These findings shed light on ways to customize goods information in mobile advertising and have strong theoretical and practical implications.

Effects of Mobile Text Advertising on Consumer Purchase Intention: A Moderated Mediation Analysis

PubMed Central

Hongyan, Lin; Zhankui, Chen

2017-01-01

Mobile shopping is increasing in prevalence and has become a necessary part of many people's daily lives. However, one main channel for mobile shopping, mobile shopping applications (apps), has not been thoroughly investigated. This study focused on mobile text advertising delivered from mobile shopping apps using the intention to purchase as the dependent variable for testing its marketing effect. In the context of a promotion focus vs. a prevention focus, we used Higgins' regulatory focus theory combined with Ajzen's TPB and Herzog's U&G to analyze the mechanism by which consumers formulate an intention to purchase in a mobile advertising context. This empirical study surveyed 320 consumers who had made a purchase using a mobile shopping app in the previous month. The results showed that infotainment, irritation, and subjective norms were significantly associated with attitudes; in turn, attitudes mediated the impact of these three factors on the intention to purchase. Moreover, a high promotion focus not only strengthened the positive effect of infotainment on attitudes but also intensified the mediation effect of attitudes between infotainment and the intention to purchase. A high prevention focus also consolidated the negative effect of irritation on attitudes as well as reinforced the mediation effect of attitudes between irritation and the intention to purchase. Furthermore, attitudes, subjective norms, and perceived behavioral control collectively impacted the intention to purchase. These findings shed light on ways to customize goods information in mobile advertising and have strong theoretical and practical implications. PMID:28690564

CAR MACHINE SHOP, FIRST FLOOR, DETAIL OF STEEL COLUMN AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

CAR MACHINE SHOP, FIRST FLOOR, DETAIL OF STEEL COLUMN AND BEAM ALTERATION, LOOKING SOUTH. MODIFICATION WAS DONE TO ACCOMMODATE MACHINERY DURING THE BUILDING'S USE AS A WHEEL SHOP. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

General view along tracks to Locomotive Shop with Car Shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view along tracks to Locomotive Shop with Car Shop on right. Note locomotive tires leaning against Car Shop wall. View from west - East Broad Top Railroad & Coal Company, State Route 994, West of U.S. Route 522, Rockhill Furnace, Huntingdon County, PA

Technical and Occupational Shops.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

This booklet presents suggested plans and specifications for and discusses facilities common to technical and occupational shops. Drawings, room plans, and text illustrate specifications for drafting rooms, a welding shop, an automechanics shop, an auto body shop, and a high school greenhouse. Also included are facility designs for agricultural…

46 CFR 110.30-1 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING GENERAL PROVISIONS Testing and Inspection... vessels in other parts of this chapter. (b) In the inspection of electric equipment and installations, the...) This subpart must not be construed to imply that shop tests or factory inspections of electric...

46 CFR 110.30-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING GENERAL PROVISIONS Testing and Inspection... vessels in other parts of this chapter. (b) In the inspection of electric equipment and installations, the...) This subpart must not be construed to imply that shop tests or factory inspections of electric...

46 CFR 110.30-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING GENERAL PROVISIONS Testing and Inspection... vessels in other parts of this chapter. (b) In the inspection of electric equipment and installations, the...) This subpart must not be construed to imply that shop tests or factory inspections of electric...

6. North wall and east end of air brake shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. North wall and east end of air brake shop section of roundhouse at center. East end of boiler shop section of roundhouse to the right of air brake shop. East end of blacksmith shop section of roundhouse at far right. View to southeast. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

3. Oblique view of southwest end, Roundhouse Machine Shop Extension, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Oblique view of southwest end, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to north showing the curvature of the end wall that was the common wall with the Roundhouse, and the large metal-clad doors through which steam locomotives were moved into the Machine Shop (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Individual budgets for people with incontinence: results from a 'shopping' experiment within the British National Health Service.

PubMed

Fader, Mandy J; Cottenden, Alan M; Gage, Heather M; Williams, Peter; Getliffe, Katharine; Clarke-O'Neill, Sinead; Jamieson, Katharine M; Green, Nicholas J

2014-04-01

Most people with urinary incontinence are given limited choice when provided with absorbent products through the British National Health Service (NHS), even though the available range is large. To investigate users' preferences for four disposable designs (inserts, all-in-ones, belted/T-shaped and pull-ups) and towelling washable/reusable products, day and night. Shopping experiment. Community-dwelling women and men in England with moderate-to-heavy urinary incontinence recruited to a larger trial. Participants tested each design and selected products they would prefer with a range of different budgets. Design preferences (rankings); 'purchasing' decisions from designated budgets. Results  Eighty-five participants (49 men) tested products, 75 completed the shopping experiment. Inserts, most frequently supplied by the NHS, were ranked second to pull-ups by women and lowest by men. When faced with budget constraints, up to 40% of participants opted to 'mix-and-match' designs. Over 15 different combinations of products were selected by participants in the shopping experiment. Most (91%) stated a willingness to 'top-up' assigned budgets from income to secure preferred designs. Participants displayed diverse preferences. Enabling user choice of absorbent product design through individual budgets could improve satisfaction of consumers and efficiency of allocation of limited NHS resources. Recent policy for the NHS seeks to provide consumers with more control in their care. Extension of the concept of individual budgets to continence supplies could be feasible and beneficial for patients and provide better value-for-money within the NHS. Further research is warranted. © 2012 John Wiley & Sons Ltd.

Detail of north end of the Electrical Shop (foreground) and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of north end of the Electrical Shop (foreground) and Sheet Metal Shop, note the metal-frame windows in the Electrical Shop, view facing east - Kahului Cannery, Plant No. 28, Boiler House, Sheet Metal and Electrical Shops, 120 Kane Street, Kahului, Maui County, HI

11. Interior detail, Boiler Room, fire door to the adjacent ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Interior detail, Boiler Room, fire door to the adjacent Blacksmith Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to southwest (90mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

45 CFR 155.710 - Eligibility standards for SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Eligibility standards for SHOP. 155.710 Section... Exchange Functions: Small Business Health Options Program (SHOP) § 155.710 Eligibility standards for SHOP. (a) General requirement. The SHOP must permit qualified employers to purchase coverage for qualified...

Youth Clothes-Shopping Behavior: An Analysis by Gender.

ERIC Educational Resources Information Center

Peters, John F.

1989-01-01

Explored possible gender differences in clothes-shopping behavior among adolescents. Findings from 387 college students revealed that: parents financially assisted sons and daughters equally; there was no gender difference in shopping frequency; mothers more frequently shopped with sons than with daughters; fathers rarely shopped with any…

48 CFR 1952.227-77 - Rights in shop drawings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

48 CFR 1952.227-77 - Rights in shop drawings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

48 CFR 1952.227-77 - Rights in shop drawings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

45 CFR 155.730 - Application standards for SHOP.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Application standards for SHOP. 155.730 Section... Exchange Functions: Small Business Health Options Program (SHOP) § 155.730 Application standards for SHOP. (a) General requirements. Application forms used by the SHOP must meet the requirements set forth in...

45 CFR 155.730 - Application standards for SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Application standards for SHOP. 155.730 Section... Exchange Functions: Small Business Health Options Program (SHOP) § 155.730 Application standards for SHOP. (a) General requirements. Application forms used by the SHOP must meet the requirements set forth in...

48 CFR 1952.227-77 - Rights in shop drawings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

2. Oblique view of southeast elevation, Roundhouse Machine Shop Extension, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Oblique view of southeast elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northeast showing the rhythm of the fenestration and pilasters (210mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Looking north through Machine Shop (Bldg. 163) Track 409 Doors ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking north through Machine Shop (Bldg. 163) Track 409 Doors at transfer table, with Boiler Shop (Bldg. 152) at left and C.W.E. Shop No. 2 (Bldg. 47) at right - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Shopping Problems among High School Students

PubMed Central

Grant, Jon E.; Potenza, Marc N.; Krishnan-Sarin, Suchitra; Cavallo, Dana A.; Desai, Rani A.

2010-01-01

Background Although shopping behavior among adolescents is normal, for some the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. Methods A large sample of high school students (n=3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. Results The overall prevalence of problem shopping was 3.5% (95%CI: 2.93–4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Conclusion Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. PMID:21497217

Shopping problems among high school students.

PubMed

Grant, Jon E; Potenza, Marc N; Krishnan-Sarin, Suchitra; Cavallo, Dana A; Desai, Rani A

2011-01-01

Although shopping behavior among adolescents is normal, for some, the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. A large sample of high school students (n = 3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. The overall prevalence of problem shopping was 3.5% (95% CI, 2.93-4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. Copyright © 2011 Elsevier Inc. All rights reserved.

The online appeal of the physical shop: How a physical store can benefit from a virtual representation.

PubMed

Moes, Anne; Vliet, Harry van

2017-06-01

Consumer behaviour in 2016 shows that (r)etailers need online/offline integration to better serve their clients. An important distinguishing feature of the physical shop is how it can offer consumers a shopping experience. This study uses two experiments to research the extent a fashion store's shopping experience can be presented to consumers via visual material (a regular photo, a 360-degree photo and a virtual reality photo of the shop) without the consumers being in the shop itself. The effects of these visual materials will also be measured in (among others) terms of purchase intention, visiting intention to the physical shop and online visit satisfaction. A theoretical framework is used to substantiate how the three types of pictures can be classified in terms of medium richness. The completed experiments show, among other outcomes, that consumers who saw the virtual reality photo of the shop have a more positive shopping experience, a higher purchase intention, a higher intention to visit the physical shop and more online visit satisfaction than people who have only seen the regular photo or the 360-degree photo of the shop. Enjoyment and novelty seem to partly explain these found effects.

The Associations between Yelp Online Reviews and Vape Shops Closing or Remaining Open One Year Later

PubMed Central

Kong, Grace; Unger, Jennifer; Baezconde-Garbanati, Lourdes; Sussman, Steve

2017-01-01

INTRODUCTION Vape shops are popular brick-and-mortar stores that sell e-cigarette products but are not understood well. Previous analysis of Yelp reviews of vape shops located in various ethnic neighborhoods in Los Angeles, California in 2014 identified characteristics of vape shop as delineated by consumers. In this study, we assessed the associations between these characteristics and vape shops going out of business in 2015. METHODS Content analysis of Yelp reviews of 72 vape shops in 2014 identified 1) general characteristics of the reviews/reviewers, 2) vape shop, staff, and marketing attributes, 3) physical environment, and 4) health claims. In 2015, in-person visits confirmed that 22% of these vape shops closed permanently. We analyzed whether characteristics/attributes identified in 2014 associated with stores remaining open (n = 56) or permanently closing (n = 16) in 2015. RESULTS Univariate findings showed that open vape shops relative to closed shops had greater 1) number of reviews, 2) rebuilds/fixings, 3) ratings of staff attributes as “helpful/patient/respectful,” and 4) report of the physical environment as “bar type.” CONCLUSIONS Bar type vape shops and those with rebuilding/fixing capabilities were associated with staying open, suggesting the popularity of these attributes. Yelp consumer reviews is a useful research tool to identify consumer-determined important sustaining attributes of vape shops and may be used to identify aspects of enduring shops that need regulations. PMID:29057379

Getting closer to people: family planning provision by drug shops in Uganda

PubMed Central

Akol, Angela; Chin-Quee, Dawn; Wamala-Mucheri, Patricia; Namwebya, Jane Harriet; Mercer, Sarah Jilani; Stanback, John

2014-01-01

ABSTRACT Background: Private-sector drug shops are often the first point of health care in sub-Saharan Africa. Training and supporting drug shop and pharmacy staff to provide a wide range of contraceptive methods and information is a promising high-impact practice for which more information is needed to fully document implementation experience and impact. Methods: Between September 2010 and March 2011, we trained 139 drug shop operators (DSOs) in 4 districts of Uganda to safely administer intramuscular DMPA (depot medroxyprogesterone acetate) contraceptive injections. In 2012, we approached 54 of these DSOs and interviewed a convenience sample of 585 of their family planning clients to assess clients' contraceptive use and perspectives on the quality of care and satisfaction with services. Finally, we compared service statistics from April to June 2011 from drug shops, community health workers (CHWs), and government clinics in 3 districts to determine the drug shop market share of family planning services. Results: Most drug shop family planning clients interviewed were women with low socioeconomic status. The large majority (89%) were continuing family planning users. DMPA was the preferred contraceptive. Almost half of the drug shop clients had switched from other providers, primarily from government health clinics, mostly as a result of more convenient locations, shorter waiting times, and fewer stock-outs in drug shops. All clients reported that the DSOs treated them respectfully, and 93% trusted the drug shop operator to maintain privacy. Three-quarters felt that drug shops offered affordable family planning services. Most of the DMPA clients (74%) were very satisfied with receiving their method from the drug shop and 98% intended to get the next injection from the drug shop. Between April and June 2011, clinics, CHWs, and drug shops in 3 districts delivered equivalent proportions of couple-years of protection, with drug shops leading marginally at 36%, followed by clinics (33%) and CHWs (31%). Conclusion: Drug shops can be a viable and convenient source of short-acting contraceptive methods, including DMPA, serving as a complement to government services. Family planning programs in Uganda and elsewhere should consider including drug shops in the network of community-based family planning providers. PMID:25611480

Test-Retest Reliability of a Survey to Measure Transport-Related Physical Activity in Adults

ERIC Educational Resources Information Center

Badland, Hannah; Schofield, Grant

2006-01-01

The present research details test-retest reliability of a newly developed, telephone-administered TPA survey for adults. This instrument examines barriers, perceptions, and current travel behaviors to place of work/study and local convenience shops. Demonstrated test-retest reliability of the Active Friendly Environments-Transport-Related Physical…

Barriers to repeated assessment of verbal learning and memory: a comparison of international shopping list task and rey auditory verbal learning test on build-up of proactive interference.

PubMed

Rahimi-Golkhandan, S; Maruff, P; Darby, D; Wilson, P

2012-11-01

Proactive interference (PI) that remains unidentified can confound the assessment of verbal learning, particularly when its effects vary from one population to another. The International Shopping List Task (ISLT) is a new measure that provides multiple forms that can be equated for linguistic factors across cultural groups. The aim of this study was to examine the build-up of PI on two measures of verbal learning-a traditional test of list learning (Rey Auditory Verbal Learning Test, RAVLT) and the ISLT. The sample consisted of 61 healthy adults aged 18-40. Each test had three parallel forms, each recalled three times. Results showed that repeated administration of the ISLT did not result in significant PI effects, unlike the RAVLT. Although these PI effects, observed during short retest intervals, may not be as robust under normal clinical administrations of the tests, the results suggest that the choice of the verbal learning test should be guided by the knowledge of PI effects and the susceptibility of particular patient groups to this effect.

Practical Business: Instructor/Student Guide.

ERIC Educational Resources Information Center

Napier, Deedee Stocker

Ten units on practical business are presented in this instructor and student guide. Each instructional unit contains objectives, suggested activities, information sheets, assignment sheets, transparency master, a test, and test answers. Unit topics are (1) before you buy (comparative shopping and wise purchasing techniques); (2) when things go…

HARD CHROME POLLUTION PREVENTION DEMONSTRATION PROJECT - INTERIM REPORT

EPA Science Inventory

In the project, five chromium emission prevention/control devices were tested tha cover the spectrum of prevention/control techniques currently in use in small- and large-size hard chromium electroplating job shops. The Project results show that some of the tested devices had ch...

Overall interior view of structures shop (11 shop) located on ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Overall interior view of structures shop (11 shop) located on west side of building 57 - looking north; the south end of the structures shop was devoted to welding heavy plate foundations and ship components; the floor is fabricated of case steel and features a grillwork of 1 1/2 fabricated holes which are used as sockets for gripping position pins. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

48 CFR 252.227-7033 - Rights in shop drawings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

Looking west at Machine Shop (Bldg. 163) south bay interior. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking west at Machine Shop (Bldg. 163) south bay interior. Note the Shaw 15-ton bridge crane. This portion of the building housed machine tools and locomotive component repair functions that supported the erecting shop operations - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

45 CFR 155.700 - Standards for the establishment of a SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Standards for the establishment of a SHOP. 155.700... Exchange Functions: Small Business Health Options Program (SHOP) § 155.700 Standards for the establishment of a SHOP. (a) General requirement. An Exchange must provide for the establishment of a SHOP that...

48 CFR 252.227-7033 - Rights in shop drawings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

45 CFR 155.725 - Enrollment periods under SHOP.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Enrollment periods under SHOP. 155.725 Section 155... Functions: Small Business Health Options Program (SHOP) § 155.725 Enrollment periods under SHOP. (a) General requirements. The SHOP must— (1) Adhere to the start of the initial open enrollment period set forth in § 155...

48 CFR 252.227-7033 - Rights in shop drawings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

45 CFR 155.740 - SHOP employer and employee eligibility appeals requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false SHOP employer and employee eligibility appeals... AFFORDABLE CARE ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.740 SHOP employer... that provides for the establishment of a SHOP pursuant to § 155.100 must provide an eligibility appeals...

45 CFR 155.740 - SHOP employer and employee eligibility appeals requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false SHOP employer and employee eligibility appeals... AFFORDABLE CARE ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.740 SHOP employer... that provides for the establishment of a SHOP pursuant to § 155.100 must provide an eligibility appeals...

6. Northeast end, Roundhouse Machine Shop Extension, Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Northeast end, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to southwest (135mm lens). The tall freestanding smokestack from the Boiler Room originally stood adjacent to this end of the building. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

48 CFR 252.227-7033 - Rights in shop drawings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

45 CFR 155.725 - Enrollment periods under SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Enrollment periods under SHOP. 155.725 Section 155... Functions: Small Business Health Options Program (SHOP) § 155.725 Enrollment periods under SHOP. (a) General requirements. The SHOP must— (1) Adhere to the start of the initial open enrollment period set forth in § 155...

48 CFR 252.227-7033 - Rights in shop drawings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Rights in shop drawings... of Provisions And Clauses 252.227-7033 Rights in shop drawings. As prescribed in 227.7107-(1)(c), use the following clause: Rights in Shop Drawings (APR 1966) (a) Shop drawings for construction means...

Looking north along east side of roundhouse and shops, superintendent's ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking north along east side of roundhouse and shops, superintendent's office at left, taken from the water towers along broadway. Locomotive blacksmith shop in right center distance with car department shops beyond, most likely taken in 1898 - Chicago, Burlington & Quincy Railroad, Roundhouse & Shops, Broadway & Spring Streets, Aurora, Kane County, IL

Down with Walls, Up with Malls: Taking Classes to the Shopping Centers.

ERIC Educational Resources Information Center

Duerden, Noel H.

1980-01-01

Learn and Shop, a concept of offering university credit courses by university faculty in shopping centers which was developed by Indiana University-Purdue University in Indianapolis, is described. The Learn and Shop curriculum permits individuals to earn a two-year associate degree in liberal arts entirely at shopping centers. (MLW)

A&M. TAN607 floor plans. Shows three floor levels of pool, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 floor plans. Shows three floor levels of pool, hot shop, and warm shop. Includes view of pool vestibule, personnel labyrinth, location of floor rails, and room numbers of office areas, labs, instrument rooms, and stairways. This drawing was re-drawn to show as-built features in 1993. Ralph M. Parsons 902-3-ANP-607-A 96. Date of original: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106748 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A&M. TAN607 sections. Section A shows variable roof lines, variable ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 sections. Section A shows variable roof lines, variable thickness of hot shop shield walls, relationship of subterranean pool to grade. Section B shows relative heights of hot shop floor and its control gallery, position of bridge cranes and manipulator rails. Locomotive service pit. Referent drawing is ID-33-E-158 Above. Ralph M. Parsons 902-3-ANP-607-A 105. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106757 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A new Nawaz-Enscore-Ham-based heuristic for permutation flow-shop problems with bicriteria of makespan and machine idle time

NASA Astrophysics Data System (ADS)

Liu, Weibo; Jin, Yan; Price, Mark

2016-10-01

A new heuristic based on the Nawaz-Enscore-Ham algorithm is proposed in this article for solving a permutation flow-shop scheduling problem. A new priority rule is proposed by accounting for the average, mean absolute deviation, skewness and kurtosis, in order to fully describe the distribution style of processing times. A new tie-breaking rule is also introduced for achieving effective job insertion with the objective of minimizing both makespan and machine idle time. Statistical tests illustrate better solution quality of the proposed algorithm compared to existing benchmark heuristics.

Looking northeast at interior of Machine Shop (Bldg. 134) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking northeast at interior of Machine Shop (Bldg. 134) - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop No. 2, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

13. View northeast of boiler plant (Building 39), engineering work ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. View northeast of boiler plant (Building 39), engineering work order building/former tin shop (Building 129), laundry MAT workshop (Building 28), pipe shop/former water softening plant (Building 81), paint spray shop/former blacksmith shop (Building 95), fuel oil storage tank building (Building 103), mason's shop (Building 77), and carpenter shop (Building 97) with steel water tank (Building 124) in background - National Home for Disabled Volunteer Soldiers Western Branch, 4101 South Fourth Street, Leavenworth, Leavenworth County, KS

View south of sail loft mid loft area. Note ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View south of sail loft - mid- loft area. Note inflatable boats undergoing pressure testing. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

Looking northeast across transfer table pit at Boiler Shop (Bldg. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking northeast across transfer table pit at Boiler Shop (Bldg. 152) - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Boiler Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Consumers' perceptions of vape shops in Southern California: an analysis of online Yelp reviews.

PubMed

Sussman, Steve; Garcia, Robert; Cruz, Tess Boley; Baezconde-Garbanati, Lourdes; Pentz, Mary Ann; Unger, Jennifer B

2014-01-01

E-cigarettes are sold at many different types of retail establishments. A new type of shop has emerged, the vape shop, which specializes in sales of varied types of e-cigarettes. Vape shops allow users to sample several types. There are no empirical research articles on vape shops. Information is needed on consumers' beliefs and behaviors about these shops, the range of products sold, marketing practices, and variation in shop characteristics by ethnic community and potential counter-marketing messages. This study is the first to investigate marketing characteristics of vape shops located in different ethnic neighborhoods in Los Angeles, by conducting a Yelp electronic search and content analysis of consumer reports on vape shops they have visited. The primary measure was Yelp reviews (N = 103 vape shops in the Los Angeles, California area), which were retrieved and content coded. We compared the attributes of vape shops representing four ethnic communities: African American, Hispanic/Latino, Korean, and White. Vape shop attributes listed as most important were the selection of flavors or hardware (95%), fair prices (92%), and unique flavors or hardware (89%). Important staff marketing attributes included being friendly (99%), helpful/patient/respectful (97%), and knowledgeable/professional (95%). Over one-half of the shops were rated as clean (52%) and relaxed (61%). Relatively few of the reviews mentioned quitting smoking (32%) or safety of e-cigarettes (15%). The selection of flavors and hardware appeared relatively important in Korean ethnic location vape shops. Yelp reviews may influence potential consumers. As such, the present study's focus on Yelp reviews addressed at least eight of the FDA's Center for Tobacco Products' priorities pertaining to marketing influences on consumer beliefs and behaviors. The findings suggest that there were several vape shop and product attributes that consumers considered important to disseminate to others through postings on Yelp. Lack of health warnings about these products may misrepresent their potential risk. The main influence variables were product variety and price. There was only a little evidence of influence of ethnic neighborhood; for example, regarding importance of flavors and hardware. Shop observational studies are recommended to discern safety factors across different ethnic neighborhoods.

9. Detail, sign at east comer of Roundhouse Machine Shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Detail, sign at east comer of Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northwest (210mm lens). Sign reads, 'Open Valve To Supply Water To City.' The railroad could supply water to all of Carlin. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

VIEW NORTH EXTREME LEFTBUILDING 32; MACHINE SHOP (1890) SECOND LEFTBUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW NORTH- EXTREME LEFT-BUILDING 32; MACHINE SHOP (1890) SECOND LEFT-BUILDING 31; RIGGER SHOP (1890) CENTER- BUILDING 28; BLACKSMITH SHOP (1885) CENTER RIGHT-BUILDING 27; PATTERN SHOP (C.1853) RIGHT-BUILDING 40; WIRE WAREHOUSE (1915) - John A. Roebling's Sons Company & American Steel & Wire Company, South Broad, Clark, Elmer, Mott & Hudson Streets, Trenton, Mercer County, NJ

1. Southeast elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Southeast elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northwest (90mm lens). Engine Stores Building (HAER NV-26-A) is at left, Oil House (HAER NV-26-B) is at right. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

View looking SE inside Electrical Shop Central of Georgia ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View looking SE inside Electrical Shop - Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, Electrical Shop, Bounded by West Broad, Jones, West Boundary & Hull Streets, Savannah, Chatham County, GA

Boiler Shop (Bldg. 152) 150ton Morgan bridge crane, looking west ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Boiler Shop (Bldg. 152) 150-ton Morgan bridge crane, looking west - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Boiler Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Boiler Shop (Bldg. 152) 150ton Morgan bridge crane, looking east ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Boiler Shop (Bldg. 152) 150-ton Morgan bridge crane, looking east - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Boiler Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Detail of urinal enclosure on north side of Machine Shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of urinal enclosure on north side of Machine Shop (Bldg. 163) - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Oblique view looking northeast at Machine Shop (Bldg. 163) from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Oblique view looking northeast at Machine Shop (Bldg. 163) from Second Street - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Manager, Restaurant or Coffee Shop (hotel & rest.) 187.168--Technical Report on Development of USES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Exploring the status of retail private drug shops in Bangladesh and action points for developing an accredited drug shop model: a facility based cross-sectional study.

PubMed

Ahmed, Syed Masud; Naher, Nahitun; Hossain, Tarek; Rawal, Lal Bahadur

2017-01-01

The private retail drug shops market in Bangladesh is largely unregulated and unaccountable, giving rise to irrational use of drugs and high Out-of-pocket expenditure on health. These shops are served by salespersons with meagre or no formal training in dispensing. This facility-based cross-sectional study was undertaken to investigate how the drug shops currently operate vis-a-vis the regulatory regime including dispensing practices of the salespersons, for identifying key action points to develop an accredited model for Bangladesh. About 90 rural and 21 urban retail drug shops from seven divisions were included in the survey. The salespersons were interviewed for relevant information, supplemented by qualitative data on perceptions of the catchment community as well as structured observation of client-provider interactions from a sub-sample. In 76% of the shops, the owner and the salesperson was the same person, and >90% of these were located within 30 min walking distance from a public sector health facility. The licensing process was perceived to be a cumbersome, lengthy, and costly process. Shop visit by drug inspectors were brief, wasn't structured, and not problem solving. Only 9% shops maintained a stock register and 10% a drug sales record. Overall, 65% clients visited drug shops without a prescription. Forty-nine percent of the salespersons had no formal training in dispensing and learned the trade through apprenticeship with fellow drug retailers (42%), relatives (18%), and village doctors (16%) etc. The catchment population of the drug shops mostly did not bother about dispensing training, drug shop licensing and buying drugs without prescription. Observed client-dispenser interactions were found to concentrate mainly on financial transaction, unless, the client pro-actively sought advice regarding the use of the drug. Majority of the drug shops studied are run by salespersons who have informal 'training' through apprenticeship. Visiting drug shops without a prescription, and dispensing without counseling unless pro-actively sought by the client, was very common. The existing process is discouraging for the shop owners to seek license, and the shop inspection visits are irregular, unstructured and punitive. These facts should be considered while designing an accredited model of drug shop for Bangladesh.

Geographic density and proximity of vape shops to colleges in the USA.

PubMed

Dai, Hongying; Hao, Jianqiang

2017-07-01

Vape shops have been spreading rapidly in the USA since 2008, catering to the fast-growing market for electronic cigarettes. Little is known about the geographic density and proximity of vape shops near colleges. Names and addresses of vape shops were collected from 3 online directories: Yelp.com, Yellowpages.com and Guidetovaping.com. We identified the prevalence of US-based vape shops and their density and proximity to colleges using a geographic information system. General linear model and negative binomial regression were performed to examine the factors associated with proximity and density of vape shops near colleges. We identified 9945 vape shops in the USA as of December 2015, a nearly threefold increase from 2013. Among the 2755 colleges included in this study, 66.5% had at least 1 vape shop within a 3-mile radius. The median proximity of the nearest vape shop to each college/university was 1.8 miles. Proximity increased by student population, private as compared to public institutions, and location (city vs rural). Within a 1-mile radius, colleges with smoke-free campus policies had a lower density of vape shops (RR=0.6, p=0.002) than those without smoke-free campus policies. Private institutions had a higher density of vape shops (RR=7.8, p<0.0001) than did public institutions. Colleges with campus housing had a lower density of vape shops (RR=0.4, p<0.0001) than those without campus housing, and colleges located in cities had a much higher density of vape shops than those located in rural areas (RR=6.6, p<0.0001). Smoke-free and e-cigarette-free campus policies had significant interactions with college type (private vs public) and campus housing in reducing vape shop density. Vape shops are more likely to be located near private institutions and colleges in cities as opposed to rural areas. Smoke-free and e-cigarette-free campus policies have had significant effects in reducing the density of vape shops but have not reduced the proximity of vape shops to colleges. Regulations on the sale and advertisement of e-cigarettes to youth and young adults are critically needed. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Autobody Refinishing General Best Shop Practices

EPA Pesticide Factsheets

This document focuses on the key components of beneficial change in small auto refinish shops. Compiled from real-life shop experiences, the documents serve as worker protection and pollution prevention goals for the small shop.

View northeast of mould loft and plating cutting shop in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View northeast of mould loft and plating cutting shop in structural assembly shop (building no. 541) - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structural Assembly Shop, League Island, Philadelphia, Philadelphia County, PA

5. RAILROAD TRRACKS LEADING TO PAINT & REPAIR SHOP; PASSENGER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. RAILROAD TRRACKS LEADING TO PAINT & REPAIR SHOP; PASSENGER CAR SHOP TO THE LEFT - Baltimore & Ohio Railroad, Mount Clare Passenger Car Shop, Southwest corner of Pratt & Poppleton Streets, Baltimore, Independent City, MD

1. VIEW WESTEAST ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. VIEW WEST-EAST ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

4. VIEW EASTSOUTH ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW EAST-SOUTH ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

10. Interior, Boiler Room, Roundhouse Machine Shop Extension, Southern Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Interior, Boiler Room, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northwest (90mm lens). The silver stacks suspended from the ceiling in the background mark the former location of the boilers, and served as steam vents. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Machine Shop (Bldg. 163) north bay interior looking east, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Machine Shop (Bldg. 163) north bay interior looking east, with a 250-ton Shaw bridge crane on the upper rails and two smaller P&H bridge cranes on the lower rails. This high-bay, north portion of the building served as the erecting shop - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

View north of inside machine shop 36; shop floor accommodates ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View north of inside machine shop 36; shop floor accommodates lathes capable of machining a cylinder 60 inches in diameter and 75 feet long; other equipment includes horizontal and vertical jig borders, hydraulic tube straighteners and other equipment for precision machining of large ship components. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

Frequent shopping by men and women increases survival in the older Taiwanese population.

PubMed

Chang, Yu-Hung; Chen, Rosalind Chia-Yu; Wahlqvist, Mark L; Lee, Meei-Shyuan

2012-07-01

Active ageing is a key to healthy ageing; shopping behaviour is an economically relevant activity of the elderly. Analysis was based on the NAHSIT 1999-2000 dataset. A total of 1841 representative free-living elderly Taiwanese people were selected and information included demographics, socioeconomic status, health behaviours, shopping frequencies, physical function and cognitive function. These data were linked to official death records. Cox proportional hazard models were used to evaluate shopping frequency on death from 1999-2008 with possible covariate adjustment. Highly frequent shopping compared to never or rarely predicted survival (HR 0.54, 95% CI 0.43 to 0.67) with adjustment for physical function and cognitive function and other covariates HR was 0.73 (95% CI 0.56 to 0.93). Elderly who shopped every day have 27% less risk of death than the least frequent shoppers. Men benefited more from everyday shopping than women with decreased HR 28% versus 23% compared to the least. Shopping behaviour favourably predicts survival. Highly frequent shopping may favour men more than women. Shopping captures several dimensions of personal well-being, health and security as well as contributing to the community's cohesiveness and economy and may represent or actually confer increased longevity.

A point-of-purchase intervention featuring in-person supermarket education impacts healthy food purchases

PubMed Central

Woolf, Kathleen; Appelhans, Bradley M.

2011-01-01

Objective This study tested the efficacy of a multicomponent supermarket point-of-purchase (POP) intervention featuring in-person nutrition education on the nutrient composition of food purchases. Design The design was a randomized trial comparing the intervention to usual care (no treatment). Setting A supermarket in a socioeconomically diverse region of Phoenix, Arizona. Participants One-hundred fifty-three adult shoppers were recruited on-site. Intervention The intervention consisted of brief shopping education by a nutrition educator and an explanation and promotion of a supermarket POP healthy shopping program that included posted shelf signs identifying healthy foods, sample shopping lists, tips, and signage. Main Outcome Measures Outcomes included purchases of total, saturated, and trans fat (g/1000 kcals), and fruits, vegetables, and dark green and bright yellow vegetables (servings/1000 kcals) derived through nutritional analysis of participant shopping baskets. Analysis Analysis of covariance compared the intervention and control groups on food purchasing patterns while adjusting for household income. Results The intervention resulted in greater purchasing of fruit and green and yellow vegetables. No other group differences were observed. Conclusions and Implications Long-term evaluations of supermarket interventions should be conducted to improve the evidence base, and to determine the potential for impact on food choices associated with decreased chronic disease. PMID:22104016

A point-of-purchase intervention featuring in-person supermarket education affects healthful food purchases.

PubMed

Milliron, Brandy-Joe; Woolf, Kathleen; Appelhans, Bradley M

2012-01-01

This study tested the efficacy of a multicomponent supermarket point-of-purchase intervention featuring in-person nutrition education on the nutrient composition of food purchases. The design was a randomized trial comparing the intervention with usual care (no treatment). A supermarket in a socioeconomically diverse region of Phoenix, AZ. One hundred fifty-three adult shoppers were recruited onsite. The intervention consisted of brief shopping education by a nutrition educator and an explanation and promotion of a supermarket point-of-purchase healthful shopping program that included posted shelf signs identifying healthful foods, sample shopping lists, tips, and signage. Outcomes included purchases of total, saturated, and trans fat (grams/1,000 kcal), and fruits, vegetables, and dark-green/yellow vegetables (servings/1,000 kcal) derived through nutritional analysis of participant shopping baskets. Analysis of covariance compared the intervention and control groups on food purchasing patterns while adjusting for household income. The intervention resulted in greater purchasing of fruit and dark-green/yellow vegetables. No other group differences were observed. Long-term evaluations of supermarket interventions should be conducted to improve the evidence base and to determine the potential for influence on food choices associated with decreased chronic disease incidence. Copyright © 2012 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

A new form of nicotine retailers: a systematic review of the sales and marketing practices of vape shops.

PubMed

Lee, Joseph G L; Orlan, Elizabeth N; Sewell, Kerry B; Ribisl, Kurt M

2017-12-05

Retailers that primarily or exclusively sell electronic cigarettes (e-cigarettes) or vaping products represent a new category of tobacco retailer. We sought to identify (a) how vape shops can be identified and (b) sales and marketing practices of vape shops. A medical librarian iteratively developed a search strategy and in February 2017 searched seven academic databases (ABI/INFORM Complete, ECONLit, Embase, Entrepreneurship, PsycINFO, PubMed/MEDLINE and Scopus). We hand searched Tobacco Regulatory Science and Tobacco Prevention & Cessation . We used dual, independent screening. Records were eligible if published in 2010 or later, were peer-reviewed journal articles and focused on vape shops. We used dual, independent data abstraction and assessed risk of bias. Of the 3605 records identified, 22 were included. We conducted a narrative systematic review. Researchers relied heavily on Yelp to identify vape shops. Vape shop owners use innovative marketing strategies that sometimes diverge from those of traditional tobacco retailers. Vape shop staff believe strongly that their products are effective harm-reduction products. Vape shops were more common in areas with more White residents. Vape shops represent a new type of retailer for tobacco products. Vape shops have potential to promote e-cigarettes for smoking cessation but also sometimes provide inaccurate information and mislabelled products. Given their spatial patterning, vape shops may perpetuate inequities in tobacco use. The growing literature on vape shops is complicated by researchers using different definitions of vape shops (eg, exclusively selling e-cigarettes vs also selling traditional tobacco products). © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

10. Interior view, east shop, ground floor, looking northwest, showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Interior view, east shop, ground floor, looking northwest, showing hardware storage rooms in tin shop area at right. - Larrabee & Hingston Company, Main Shop Building, 19 Howley Street, Peabody, Essex County, MA

AUTOMOTIVE REPAIR SHOP, DETAIL OF FABRICATING PRESS IN EAST END ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, DETAIL OF FABRICATING PRESS IN EAST END OF MAIN WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

AUTOMOTIVE REPAIR SHOP, DETAIL OF MILLS COAL BOILER WITH SCREWFEED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, DETAIL OF MILLS COAL BOILER WITH SCREW-FEED COAL HOPPER ON RIGHT SIDE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON SOUTH SIDE OF SOUTH WING. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

Terpene exposure and respiratory effects among workers in Swedish joinery shops.

PubMed

Eriksson, K A; Levin, J O; Sandström, T; Lindström-Espeling, K; Lindén, G; Stjernberg, N L

1997-04-01

Exposure to monoterpenes (alpha-pinene, beta-pinene and delta 3-carene) in joinery shops was studied in Sweden during the processing of Scot's pine, and the acute respiratory effects among the employees were evaluated. A cross-sectional study of 38 workers was carried out in 4 joinery shops. The investigation included personal air sampling of monoterpenes, biological monitoring of metabolites of alpha-pinene in the workers' urine, interviews following a standardized questionnaire, and dynamic spirometry. The personal exposure to monoterpenes in the joinery shops was 10-214 mg/m3. The correlation (correlation coefficient = 0.69) between exposure to alpha-pinene and verbenols (metabolites from alpha-pinene) in urine was relatively good. No acute effects on forced vital capacity or forced expiratory volume during 1 s were detected. The workers had significantly reduced preshift lung function values when compared with the values of a local reference group, even when smokers and ex-smokers were excluded. Personal exposure to the monoterpenes alpha-pinene, and delta 3-carene in joinery shops may exceed the present Swedish occupational exposure limit of 150 mg/m3 during the winter season when workroom air is commonly recirculated. The determination of metabolites of alpha-pinene (verbenols) in urine can be used as an index of exposure to fumes released during wood-treating processes. The results from the lung function tests indicate chronic rather than acute reactions in the airways. The fact that there were no major changes in lung function over a workshift indicates chronic reaction in the airways.

Technology demonstration for reducing mercury emissions from small-scale gold refining facilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habegger, L. J.; Fernandez, L. E.; Engle, M.

2008-06-30

Gold that is brought from artisanal and small-scale gold mining areas to gold shops for processing and sale typically contains 5-40% mercury. The uncontrolled removal of the residual mercury in gold shops by using high-temperature evaporation can be a significant source of mercury emissions in urban areas where the shops are located. Emissions from gold shop hoods during a burn can exceed 1,000 mg/m{sup 3}. Because the saturation concentration of mercury vapor at operating temperatures at the hood exhaust is less than 100 mg/m{sup 3}, the dominant component of the exhaust is in the form of aerosol or liquid particles.more » The U.S. Environmental Protection Agency (EPA), with technical support from Argonne National Laboratory (Argonne), has completed a project to design and test a technology to remove the dominant aerosol component in the emissions from gold shops. The objective was to demonstrate a technology that could be manufactured at low cost and by using locally available materials and manufacturing capabilities. Six prototypes designed by Argonne were locally manufactured, installed, and tested in gold shops in Itaituba and Creporizao, Brazil. The initial prototype design incorporated a pebble bed as the media for collecting the mercury aerosols, and a mercury collection efficiency of over 90% was demonstrated. Though achieving high efficiencies, the initial prototype was determined to have practical disadvantages such as excessive weight, a somewhat complex construction, and high costs (>US$1,000). To further simplify the construction, operation, and associated costs, a second prototype design was developed in which the pebble bed was replaced with slotted steel baffle plates. The system was designed to have flexibility for installation in various hood configurations. The second prototype with the baffle plate design was installed and tested in several different hood/exhaust systems to determine the optimal installation configuration. The significance of coagulation and collection of the mercury aerosols in exhaust ducts, which is dependent on the hood and collector configuration, was also evaluated. Prototype demonstration tests verified the theoretical basis for mercury aerosol capture that can be used to optimize the baffle plate design, flow rates, and hood exhaust ducts and plenum to achieve 80% or higher removal efficiencies. Results indicated that installation configuration significantly influences a system's capture efficiency. Configurations that retained existing inlet ducts resulted in system efficiencies of more than 80%, whereas installation configurations without inlet ducts significantly reduced capture efficiency. As an alternative to increasing the volume of inlet ducts, the number of baffle plates in the system baffle assembly could be doubled to increase efficiency. Recommended installation and operation procedures were developed on the basis of these results. A water-based mercury capture system developed in Indonesia for installation in smaller shops was also tested and shown to be effective for certain applications. The cost of construction and installation of the baffle plate prototype was approximately US$400. These costs were reported as acceptable by local gold shop owners and government regulators, and were significantly lower than the cost of an alternate charcoal/copper mesh mercury filter available in the region, which costs about US$10,000. A sampling procedure that consists of a particle filter combined with a vapor analyzer was demonstrated as an effective procedure for analyzing both the aerosol and vapor components of the mercury concentrations. Two key findings for enhancing higher mercury collection were identified. First, the aerosol/vapor mercury emissions must be given sufficient time for the mercury particles to coagulate to a size that can be readily captured by the baffle plates. An interval of at least 6 seconds of transit time between the point of evaporation and contact with the slotted baffle plates is recommended. Some particles will also deposit in the exhaust ducts between the point of evaporation and the baffle plates. Second, the slots in the baffle plates create jets that force the mercury particles to impinge and adhere on downstream surfaces. The baffle plates should closely follow the designs developed for this system to be most effective.« less

Online versus conventional shopping: consumers' risk perception and regulatory focus.

PubMed

van Noort, Guda; Kerkhof, Peter; Fennis, Bob M

2007-10-01

In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a prevention focus. The findings in Study 1 demonstrate these effects by using self-report measures for risk perception and prevention focus. In Study 2, we replicated these findings and demonstrated that the effect of an online shopping environment carries over to behavior in a domain unrelated to shopping.

A Smartphone App for Families With Preschool-Aged Children in a Public Nutrition Program: Prototype Development and Beta-Testing

PubMed Central

Emerson, Janice S; Quirk, Meghan E; Canedo, Juan R; Jones, Jessica L; Vylegzhanina, Violetta; Schmidt, Douglas C; Mulvaney, Shelagh A; Beech, Bettina M; Briley, Chiquita; Harris, Calvin; Husaini, Baqar A

2017-01-01

Background The Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) in the United States provides free supplemental food and nutrition education to low-income mothers and children under age 5 years. Childhood obesity prevalence is higher among preschool children in the WIC program compared to other children, and WIC improves dietary quality among low-income children. The Children Eating Well (CHEW) smartphone app was developed in English and Spanish for WIC-participating families with preschool-aged children as a home-based intervention to reinforce WIC nutrition education and help prevent childhood obesity. Objective This paper describes the development and beta-testing of the CHEW smartphone app. The objective of beta-testing was to test the CHEW app prototype with target users, focusing on usage, usability, and perceived barriers and benefits of the app. Methods The goals of the CHEW app were to make the WIC shopping experience easier, maximize WIC benefit redemption, and improve parent snack feeding practices. The CHEW app prototype consisted of WIC Shopping Tools, including a barcode scanner and calculator tools for the cash value voucher for purchasing fruits and vegetables, and nutrition education focused on healthy snacks and beverages, including a Yummy Snack Gallery and Healthy Snacking Tips. Mothers of 63 black and Hispanic WIC-participating children ages 2 to 4 years tested the CHEW app prototype for 3 months and completed follow-up interviews. Results Study participants testing the app for 3 months used the app on average once a week for approximately 4 and a half minutes per session, although substantial variation was observed. Usage of specific features averaged at 1 to 2 times per month for shopping-related activities and 2 to 4 times per month for the snack gallery. Mothers classified as users rated the app’s WIC Shopping Tools relatively high on usability and benefits, although variation in scores and qualitative feedback highlighted several barriers that need to be addressed. The Yummy Snack Gallery and Healthy Snacking Tips scored higher on usability than benefits, suggesting that the nutrition education components may have been appealing but too limited in scope and exposure. Qualitative feedback from mothers classified as non-users pointed to several important barriers that could preclude some WIC participants from using the app at all. Conclusions The prototype study successfully demonstrated the feasibility of using the CHEW app prototype with mothers of WIC-enrolled black and Hispanic preschool-aged children, with moderate levels of app usage and moderate to high usability and benefits. Future versions with enhanced shopping tools and expanded nutrition content should be implemented in WIC clinics to evaluate adoption and behavioral outcomes. This study adds to the growing body of research focused on the application of technology-based interventions in the WIC program to promote program retention and childhood obesity prevention. PMID:28768611

Vape Shop Density and Socio-Demographic Disparities: A US Census Tract Analysis.

PubMed

Dai, Hongying; Hao, Jianqiang; Catley, Delwyn

2017-11-01

Vape shops are an emerging business specializing in the sales and promotion of e-cigarette, e-juice, and other vaping products. This study sought to evaluate the associations between vape shop density and socio-demographic characteristics at the US census tract level. Vape shop data (n = 9943) were collected from three online directories: Yelp.com, Yellowpages.com, and Guidetovaping.com. Addresses of vape shops were geocoded and the density per 10 000 people was estimated at each US census tract. Zero inflated negative binomial regression model was performed to examine the socio-demographic factors associated with vape shop density. Overall, there was a higher vape shop density in urban versus nonurban census tracts. In urban areas, higher vape shop density was associated with larger proportions of Hispanics and Asians, adults aged 18-44 years old and higher poverty, while the decrease in vape shop density was associated with larger proportions of population under 18 years old, higher education, larger household size, and a higher percentage of owner occupied housing units. In nonurban areas, higher vape shop density was associated larger proportions of African Americans and Hispanics, smaller household size and a lower percentage of owner occupied housing units. At the national level, there are inequalities of vape shop density by some socio-demographic characteristics and heterogeneity between urban and nonurban areas. Vape shops are more likely to be concentrated in areas where people with a higher risk for vaping and smoking reside. Our findings could inform initiatives aimed at a stronger licensing requirement for vape shops and federal and state-level regulations of this industry to prevent vape shop from targeting minority and other socially disadvantaged groups. © The Author 2017. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Differences in malaria care seeking and dispensing outcomes for adults and children attending drug vendors in Nasarawa, Nigeria.

PubMed

Liu, Jenny; Isiguzo, Chinwoke; Sieverding, Maia

2015-08-01

To characterise the differences in care seeking behaviour and dispensing outcomes between adults and children purchasing drugs for malaria at retail shops in Nigeria. In Nasarawa State, retail drug shops were enumerated and a subset of those stocking antimalarials were selected as study sites and surveyed. Customers exiting shops after purchasing antimalarial drugs were surveyed and tested with a malaria rapid diagnostic test. Sick adults and caregivers accompanying sick children were eligible, but individuals purchasing drugs for a sick person that was not present were excluded. Multivariate regression analysis was used to identify the correlates of care seeking and the quality of interaction at the shop. Of 737 participants, 80% were adults and 20% were children (under age 18). Caregivers of sick children were more likely to obtain a prescription prior to attending a drug retailer than adults seeking care for themselves and waited a shorter time before seeking care. Caregivers of sick children were also more likely than sick adults to have been asked about symptoms by the retailer, to have been given an examination, and to have purchased an ACT. Fewer than half of respondents had purchased an ACT. Only 14% of adults, but 27% of children were RDT-positive; RDT-positive children were more likely to have had an ACT purchased for them than RDT-positive adults. Children with suspected malaria tend to receive better care at drug retailers than adults. The degree of overtreatment and prevalence of dispensing non-recommended antimalarials emphasise the need for routine diagnosis before treatment to properly treat both malaria and non-malaria illnesses. © 2015 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

Differences in malaria care seeking and dispensing outcomes for adults and children attending drug vendors in Nasarawa, Nigeria

PubMed Central

Liu, Jenny; Isiguzo, Chinwoke; Sieverding, Maia

2015-01-01

Objectives To characterise the differences in care seeking behaviour and dispensing outcomes between adults and children purchasing drugs for malaria at retail shops in Nigeria. Methods In Nasarawa State, retail drug shops were enumerated and a subset of those stocking antimalarials were selected as study sites and surveyed. Customers exiting shops after purchasing antimalarial drugs were surveyed and tested with a malaria rapid diagnostic test. Sick adults and caregivers accompanying sick children were eligible, but individuals purchasing drugs for a sick person that was not present were excluded. Multivariate regression analysis was used to identify the correlates of care seeking and the quality of interaction at the shop. Results Of 737 participants, 80% were adults and 20% were children (under age 18). Caregivers of sick children were more likely to obtain a prescription prior to attending a drug retailer than adults seeking care for themselves and waited a shorter time before seeking care. Caregivers of sick children were also more likely than sick adults to have been asked about symptoms by the retailer, to have been given an examination, and to have purchased an ACT. Fewer than half of respondents had purchased an ACT. Only 14% of adults, but 27% of children were RDT-positive; RDT-positive children were more likely to have had an ACT purchased for them than RDT-positive adults. Conclusions Children with suspected malaria tend to receive better care at drug retailers than adults. The degree of overtreatment and prevalence of dispensing non-recommended antimalarials emphasise the need for routine diagnosis before treatment to properly treat both malaria and non-malaria illnesses. PMID:25877471

Detail of large, brick columns and bracket inside Electrical Shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of large, brick columns and bracket inside Electrical Shop - Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, Electrical Shop, Bounded by West Broad, Jones, West Boundary & Hull Streets, Savannah, Chatham County, GA

AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON SOUTH SIDE OF SOUTH WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING WOOD EAVE AND STUCCO RAKEBOARD ON GABLE END. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

AUTOMOTIVE REPAIR SHOP, DETAIL OF MILLS COAL BOILER WITH SCREWFEED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, DETAIL OF MILLS COAL BOILER WITH SCREW-FEED COAL HOPPER ON RIGHT SIDE, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

Detail of heating coil for Machine Shop (Bldg. 163) ventilation ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of heating coil for Machine Shop (Bldg. 163) ventilation system Note portion of fan visible behind coil - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Shopping-Center in deutschen Mittelstädten und ihr Einfluss auf die Zentralitätsentwicklung. Eine Untersuchung unter der Verwendung von Einzelhandelskennzahlen

NASA Astrophysics Data System (ADS)

Eckhardt, Yannick

2017-06-01

Shopping-centers have been subject to intense analysis from various angles. Due to by the growing number of shopping-centers located in medium-sized cities, a change of money flows within the municipal boundaries is expected. On a multi-level basis this article shows key retail figures of medium-sized cities with shopping-centers in comparison to ones without. The final result reveals that the retail turnover of medium-sized cities with a shopping-center reaches a significantly higher level than cities without a shopping-center. Furthermore, the evaluation of data shows a rise of the retail centrality in medium sized towns as a consequence of the opening of a shopping-center. This means the construction of shopping-centers doesn't only cause a shift of money flows within the city boundaries but also leads to an additional influx of money from outside the municipalities.

17. Interior detail, pilaster on transverse wall at the northeast ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Interior detail, pilaster on transverse wall at the northeast end of the Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northeast (90mm lens). Note the offset top of the pilaster, a feature common to all interior transverse wall pilasters. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Why do you shop there? A mixed methods study mapping household food shopping patterns onto weekly routines of black women.

PubMed

DiSantis, Katherine Isselmann; Hillier, Amy; Holaday, Rio; Kumanyika, Shiriki

2016-01-28

The effectiveness of initiatives to increase healthy food access may be affected by where people decide to shop. People with poor neighborhood access to large grocery stores develop shopping patterns that require traveling to other areas, and some people who do have neighborhood access also travel elsewhere for food shopping. We sought to gain an understanding of household food shopping patterns in a sample of Black women in terms of where they shopped and why. All food shopping trips of 35 low- or middle/high-income black mothers or caregivers living with at least one child were identified from grocery shopping receipts collected over four consecutive weeks. Food shopping locations were mapped along with locations of participants' homes and other places they visited during weekly routine travels (e.g. work, child's school). Semi-structured individual interviews elicited narrative information about whether and how grocery shopping trips were linked to routine travels. Inductive content analysis was utilized to identify emergent themes from interviews. Themes were considered in relation to geospatial distances and travel patterns identified through mapping of participants' shopping. Participants shopped at an average of six different stores, traveling on average a total of 35 miles (sd = 41) (Euclidian distance) over the four weeks. The most frequented store was within a mile of home (57%) or home or another place visited in the weekly routine for about 77% of participants. Interview results emphasized the concept of convenience which referred to geographical proximity to the home or routine destinations and also to potential to save time because several stores were co-located or because the store layout was easy to navigate and familiar. Store selection also related to mode of transportation, pricing, and family preference for certain foods. People have specific reasons for consistently shopping in areas outside of their neighborhood of residence. Incorporating considerations other than proximity (e.g. time saving while shopping, promoting less familiar foods, pricing) into food environment interventions may facilitate use of new stores by neighborhood residents and thereby increase the viability of these stores as health-promoting food environment interventions.

Forecasting of indirect consumables for a Job Shop

NASA Astrophysics Data System (ADS)

Shakeel, M.; Khan, S.; Khan, W. A.

2016-08-01

A job shop has an arrangement where similar machines (Direct consumables) are grouped together and use indirect consumables to produce a product. The indirect consumables include hack saw blades, emery paper, painting brush etc. The job shop is serving various orders at a particular time for the optimal operation of job shop. Forecasting is required to predict the demand of direct and indirect consumables in a job shop. Forecasting is also needed to manage lead time, optimize inventory cost and stock outs. The objective of this research is to obtain the forecast for indirect consumables. The paper shows how job shop can manage their indirect consumables more accurately by establishing a new technique of forecasting. This results in profitable use of job shop by multiple users.

AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING WOOD EAVE AND STUCCO RAKEBOARD ON GABLE END, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

10. VIEW OF BOILER SHOP FROM TOP OF BOX CAR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. VIEW OF BOILER SHOP FROM TOP OF BOX CAR WITH CIRCULAR CAR SHOP IN BACKGROUND LOOKING NORTHEAST. - Baltimore & Ohio Railroad, Mount Clare Shops, South side of Pratt Street between Carey & Poppleton Streets, Baltimore, Independent City, MD

Looking north at east end of Machine Shop (Bldg. 163). ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking north at east end of Machine Shop (Bldg. 163). Note overhead crane rail extension and pit between rails - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Looking south from roof of Machine Shop (Bldg. 163) at ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking south from roof of Machine Shop (Bldg. 163) at 120-foot turntable and site of 35-stall roundhouse - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Looking northeast at Machine Shop (Bldg. 163) south wall. Note ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking northeast at Machine Shop (Bldg. 163) south wall. Note bridge crane at right and crane rail attached to building - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Using Eye Tracking to Explore Consumers' Visual Behavior According to Their Shopping Motivation in Mobile Environments.

PubMed

Hwang, Yoon Min; Lee, Kun Chang

2017-07-01

Despite a strong shift to mobile shopping trends, many in-depth questions about mobile shoppers' visual behaviors in mobile shopping environments remain unaddressed. This study aims to answer two challenging research questions (RQs): (a) how much does shopping motivation like goal orientation and recreation influence mobile shoppers' visual behavior toward displays of shopping information on a mobile shopping screen and (b) how much of mobile shoppers' visual behavior influences their purchase intention for the products displayed on a mobile shopping screen? An eye-tracking approach is adopted to answer the RQs empirically. The experimental results showed that goal-oriented shoppers paid closer attention to products' information areas to meet their shopping goals. Their purchase intention was positively influenced by their visual attention to the two areas of interest such as product information and consumer opinions. In contrast, recreational shoppers tended to visually fixate on the promotion area, which positively influences their purchase intention. The results contribute to understanding mobile shoppers' visual behaviors and shopping intentions from the perspective of mindset theory.

Design and fabrication of metal briquette machine for shop floor

NASA Astrophysics Data System (ADS)

Pramod, R.; Kumar, G. B. Veeresh; Prashanth B., N.

2017-07-01

Efforts have to be taken to ensure efficient waste management system in shop floors, with minimum utilization of space and energy when it comes to disposing metal chips formed during machining processes. The salvaging of junk metallic chips and the us e of scrap are important for the economic production of a steelworks. For this purpose, we have fabricated a metal chip compaction machine, which can compact the metal chips into small briquettes. The project started with the survey of chips formed in shop floors and the practices involved in waste management. Study was done on the requirements for a better compaction. The heating chamber was designed taking into consideration the temperature required for an easy compaction of the metal chips. The power source for compaction and the pneumatic design for mechanism was done following the appropriate calculations regarding the air pressure provided and thrust required. The processes were tested under different conditions and found effective. The fabrication of the machine has been explained in detail and the results have been discussed.

Heuristic algorithms for the minmax regret flow-shop problem with interval processing times.

PubMed

Ćwik, Michał; Józefczyk, Jerzy

2018-01-01

An uncertain version of the permutation flow-shop with unlimited buffers and the makespan as a criterion is considered. The investigated parametric uncertainty is represented by given interval-valued processing times. The maximum regret is used for the evaluation of uncertainty. Consequently, the minmax regret discrete optimization problem is solved. Due to its high complexity, two relaxations are applied to simplify the optimization procedure. First of all, a greedy procedure is used for calculating the criterion's value, as such calculation is NP-hard problem itself. Moreover, the lower bound is used instead of solving the internal deterministic flow-shop. The constructive heuristic algorithm is applied for the relaxed optimization problem. The algorithm is compared with previously elaborated other heuristic algorithms basing on the evolutionary and the middle interval approaches. The conducted computational experiments showed the advantage of the constructive heuristic algorithm with regards to both the criterion and the time of computations. The Wilcoxon paired-rank statistical test confirmed this conclusion.

View of building 11050, showing metal clad addition on east ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of building 11050, showing metal clad addition on east elevation, looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

Can You Be Charged with Negligence?

ERIC Educational Resources Information Center

Robinson, Joseph C.

1982-01-01

Ten questions regarding classroom and shop safety are presented for the teacher and school administrator to test themselves and guard against a ruling of negligence and legal liability in the performance of their jobs. (CT)

Application of basic pharmacology and dispensing practice of antibiotics in accredited drug-dispensing outlets in Tanzania.

PubMed

Minzi, Om; Manyilizu, Vs

2013-01-01

Provision of pharmaceutical services in accredited drug-dispensing outlets (ADDOs) in Tanzania has not been reported. This study compared the antibiotics dispensing practice between ADDOs and part II shops, or duka la dawa baridi (DLDBs), in Tanzania. This was a cross-sectional study that was conducted in ADDOs and DLDBs. A simulated client method for data collection was used, and a total of 85 ADDOs, located in Mvomero, Kilombero, and Morogoro rural districts, were compared with 60 DLDBs located in Kibaha district. The research assistants posed as simulated clients and requested to buy antibiotics from ADDOs and DLDBs after presenting a case scenario or disease condition. Among the diseases presented were those requiring antibiotics and those usually managed only by oral rehydration salt or analgesics. The simulated clients wanted to know the antibiotics that were available at the shop. The posed questions set a convincing ground to the dispenser either to dispense the antibiotic directly, request a prescription, or refer the patient to a health facility. Proportions were used to summarize categorical variables between ADDOs and DLDBs, and the chi-square test was used to test for statistical difference between the two drug-outlet types in terms of antibiotic-dispensing practice. As many as 40% of trained ADDO dispensers no longer worked at the ADDO shops, so some of the shops employed untrained staff. A larger proportion of ADDOs than DLDBs dispensed antibiotics without prescriptions (P = 0.004). The overall results indicate that there was no difference between the two types of shops in terms of adhering to regulations for dispensing antibiotics. However, in some circumstances, eg, antibiotic sale without prescription and no referral made, for complicated cases, ADDOs performed worse than DLDBs. As many as 30% of DLDBs and 35% of ADDOs dispensed incomplete doses of antibiotics. In both ADDOs and DLDBs, fortified procaine penicillin powder was dispensed as topical application for injuries. There was no statistical difference between ADDOs and DLDBs in the violation of dispensing practice and both ADDOs and DLDBs expressed poor knowledge of the basic pharmacology of antibiotics.

Application of basic pharmacology and dispensing practice of antibiotics in accredited drug-dispensing outlets in Tanzania

PubMed Central

Minzi, OM; Manyilizu, VS

2013-01-01

Background Provision of pharmaceutical services in accredited drug-dispensing outlets (ADDOs) in Tanzania has not been reported. This study compared the antibiotics dispensing practice between ADDOs and part II shops, or duka la dawa baridi (DLDBs), in Tanzania. Methodology This was a cross-sectional study that was conducted in ADDOs and DLDBs. A simulated client method for data collection was used, and a total of 85 ADDOs, located in Mvomero, Kilombero, and Morogoro rural districts, were compared with 60 DLDBs located in Kibaha district. The research assistants posed as simulated clients and requested to buy antibiotics from ADDOs and DLDBs after presenting a case scenario or disease condition. Among the diseases presented were those requiring antibiotics and those usually managed only by oral rehydration salt or analgesics. The simulated clients wanted to know the antibiotics that were available at the shop. The posed questions set a convincing ground to the dispenser either to dispense the antibiotic directly, request a prescription, or refer the patient to a health facility. Proportions were used to summarize categorical variables between ADDOs and DLDBs, and the chi-square test was used to test for statistical difference between the two drug-outlet types in terms of antibiotic-dispensing practice. Results As many as 40% of trained ADDO dispensers no longer worked at the ADDO shops, so some of the shops employed untrained staff. A larger proportion of ADDOs than DLDBs dispensed antibiotics without prescriptions (P = 0.004). The overall results indicate that there was no difference between the two types of shops in terms of adhering to regulations for dispensing antibiotics. However, in some circumstances, eg, antibiotic sale without prescription and no referral made, for complicated cases, ADDOs performed worse than DLDBs. As many as 30% of DLDBs and 35% of ADDOs dispensed incomplete doses of antibiotics. In both ADDOs and DLDBs, fortified procaine penicillin powder was dispensed as topical application for injuries. Conclusion There was no statistical difference between ADDOs and DLDBs in the violation of dispensing practice and both ADDOs and DLDBs expressed poor knowledge of the basic pharmacology of antibiotics. PMID:23403610

Rudimentary Cleaning Compared to Level 300A

NASA Technical Reports Server (NTRS)

Arpin, Christina Y. Pina; Stoltzfus, Joel

2012-01-01

A study was done to characterize the cleanliness level achievable when using a rudimentary cleaning process, and results were compared to JPR 5322.1G Level 300A. While it is not ideal to clean in a shop environment, some situations (e.g., field combat operations) require oxygen system hardware to be maintained and cleaned to prevent a fire hazard, even though it cannot be sent back to a precision cleaning facility. This study measured the effectiveness of basic shop cleaning. Initially, three items representing parts of an oxygen system were contaminated: a metal plate, valve body, and metal oxygen bottle. The contaminants chosen were those most likely to be introduced to the system during normal use: oil, lubricant, metal shavings/powder, sand, fingerprints, tape, lip balm, and hand lotion. The cleaning process used hot water, soap, various brushes, gaseous nitrogen, water nozzle, plastic trays, scouring pads, and a controlled shop environment. Test subjects were classified into three groups: technical professionals having an appreciation for oxygen hazards; professional precision cleaners; and a group with no previous professional knowledge of oxygen or precision cleaning. Three test subjects were in each group, and each was provided with standard cleaning equipment, a cleaning procedure, and one of each of the three test items to clean. The results indicated that the achievable cleanliness level was independent of the technical knowledge or proficiency of the personnel cleaning the items. Results also showed that achieving a Level 300 particle count was more difficult than achieving a Level A nonvolatile residue amount.

Getting closer to people: family planning provision by drug shops in Uganda.

PubMed

Akol, Angela; Chin-Quee, Dawn; Wamala-Mucheri, Patricia; Namwebya, Jane Harriet; Mercer, Sarah Jilani; Stanback, John

2014-11-13

Private-sector drug shops are often the first point of health care in sub-Saharan Africa. Training and supporting drug shop and pharmacy staff to provide a wide range of contraceptive methods and information is a promising high-impact practice for which more information is needed to fully document implementation experience and impact. Between September 2010 and March 2011, we trained 139 drug shop operators (DSOs) in 4 districts of Uganda to safely administer intramuscular DMPA (depot medroxyprogesterone acetate) contraceptive injections. In 2012, we approached 54 of these DSOs and interviewed a convenience sample of 585 of their family planning clients to assess clients' contraceptive use and perspectives on the quality of care and satisfaction with services. Finally, we compared service statistics from April to June 2011 from drug shops, community health workers (CHWs), and government clinics in 3 districts to determine the drug shop market share of family planning services. Most drug shop family planning clients interviewed were women with low socioeconomic status. The large majority (89%) were continuing family planning users. DMPA was the preferred contraceptive. Almost half of the drug shop clients had switched from other providers, primarily from government health clinics, mostly as a result of more convenient locations, shorter waiting times, and fewer stock-outs in drug shops. All clients reported that the DSOs treated them respectfully, and 93% trusted the drug shop operator to maintain privacy. Three-quarters felt that drug shops offered affordable family planning services. Most of the DMPA clients (74%) were very satisfied with receiving their method from the drug shop and 98% intended to get the next injection from the drug shop. Between April and June 2011, clinics, CHWs, and drug shops in 3 districts delivered equivalent proportions of couple-years of protection, with drug shops leading marginally at 36%, followed by clinics (33%) and CHWs (31%). Drug shops can be a viable and convenient source of short-acting contraceptive methods, including DMPA, serving as a complement to government services. Family planning programs in Uganda and elsewhere should consider including drug shops in the network of community-based family planning providers. © Akol et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are properly cited. To view a copy of the license, visit http://creativecommons.org/licenses/by/3.0/. When linking to this article, please use the following permanent link: http://dx.doi.org/10.9745/GHSP-D-14-00085.

View of south elevation of Automotive and Tractor Repair Shops ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of south elevation of Automotive and Tractor Repair Shops with the Warehouse Fabrication Shop and Stack in the background, looking from the southwest - Kekaha Sugar Company, Automotive and Tractor Repair Shops, 8315 Kekaha Road, Kekaha, Kauai County, HI

Lube rack of Automotive and Tractor Repair Shops with Warehousefield ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Lube rack of Automotive and Tractor Repair Shops with Warehouse-field Equipment Repair Shop Building's wall to the right, looking from the south - Kekaha Sugar Company, Automotive and Tractor Repair Shops, 8315 Kekaha Road, Kekaha, Kauai County, HI

Learn & Shop: Teaching Composition in Shopping Centers.

ERIC Educational Resources Information Center

East, James R.; Strahl, Ronald

1982-01-01

Describes a learn and shop program conducted by Indiana University-Purdue University at Indianapolis in various shopping malls around the city. Discusses how the atmosphere of composition courses held off campus influences students' attitudes toward writing and college-level work. (HTH)

1. N elevation of Tender Frame Shop showing restored, standing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. N elevation of Tender Frame Shop showing restored, standing seam metal roof. - Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, Tender Frame Shop, Bounded by West Broad, Jones, West Boundary & Hull Streets, Savannah, Chatham County, GA

Planning and Equipping a New Machine Shop

ERIC Educational Resources Information Center

Bloom, Nick

1978-01-01

The author describes the planning and equipping of a new machine shop facility at the East Los Angeles Occupational Center. Lists of machine shop and classroom equipment, a floor plan of the facility, and some new shop curriculum approaches are included. (MF)

Detail of Machine Shop (Bldg. 163) south wall and crane ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of Machine Shop (Bldg. 163) south wall and crane rail. The overlapped tracks in foreground were used to store wheelsets - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Outpatient-shopping behavior and survival rates in newly diagnosed cancer patients.

PubMed

Chiou, Shang-Jyh; Wang, Shiow-Ing; Liu, Chien-Hsiang; Yaung, Chih-Liang

2012-09-01

To evaluate the appropriateness of the definition of outpatient-shopping behavior in Taiwanese patients. Linked study of 3 databases (Taiwan Cancer Registry, National Health Insurance [NHI] claim database, and death registry database). Outpatient shopping behavior was defined as making at least 4 or 5 physician visits to confirm a cancer diagnosis. We analyzed patient-related factors and the 5-year overall survival rate of the outpatient-shopping group compared with a nonshopping group. Using the household registration database and NHI database, we determined the proportion of outpatient shopping, characteristics of patients who did and did not shop for outpatient therapy, time between diagnosis and start of regular treatment, and medical service utilization in the shopping versus the nonshopping group. Patients with higher incomes were significantly more likely to shop for outpatient care. Patients with higher comorbidity scores were 1.4 times more likely to shop for outpatient care than patients with lower scores. Patients diagnosed with more advanced cancer were more likely to shop than those who were not. Patients might be more trusting of cancer diagnoses given at higher-level hospitals. The nonshopping groups had a longer duration of survival over 5 years. Health authorities should consider charging additional fees after a specific outpatient- shopping threshold is reached to reduce this behavior. The government may need to reassess the function of the medical sources network by shrinking it from the original 4 levels to 2 levels, or by enhancing the referral function among different hospital levels.

Identification of Variables and Factors Impacting Consumer Behavior in On-line Shopping in India: An Empirical Study

NASA Astrophysics Data System (ADS)

Chhikara, Sudesh

On-line shopping is a recent phenomenon in the field of E-Business and is definitely going to be the future of shopping in the world. Most of the companies are running their on-line portals to sell their products/services. Though online shopping is very common outside India, its growth in Indian Market, which is a large and strategic consumer market, is still not in line with the global market. The potential growth of on-line shopping has triggered the idea of conducting a study on on-line shopping in India. The present research paper has used exploratory study to depict and highlight the various categories of factors and variables impacting the behavior of consumers towards on-line shopping in India. The data was collected through in-depth interviews on a sample of 41 respondents from Delhi, Mumbai, Chennai and Bangalore. The results of the study show that on-line shopping in India is basically impacted by five categories of factors like demographics factor, Psychographics factor, Online shopping feature and policies, Technological factor, Security factor. The results of the study are used to present a comprehensive model of on-line shopping which could be further used by the researchers and practitioners for conducting future studies in the similar area. A brief operational definition of all the factors and variables impacting on-line shopping in India is also described. And finally practical implications of the study are also elucidated.

8. Detail, metalclad locomotive entry doors, southwest end, Roundhouse Machine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. Detail, metal-clad locomotive entry doors, southwest end, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northeast (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

SXI prototype mirror mount

NASA Technical Reports Server (NTRS)

1995-01-01

The purpose of this contract was to provide optomechanical engineering and fabrication support to the Solar X-ray Imager (SXI) program in the areas of mirror, optical bench and camera assemblies of the telescope. The Center for Applied Optics (CAO) worked closely with the Optics and S&E technical staff of MSFC to develop and investigate the most viable and economical options for the design and fabrication of a number of parts for the various telescope assemblies. All the tasks under this delivery order have been successfully completed within budget and schedule. A number of development hardware parts have been designed and fabricated jointly by MSFC and UAH for the engineering model of SXI. The major parts include a nickel electroformed mirror and a mirror mount, plating and coating of the ceramic spacers, and gold plating of the contact rings and fingers for the camera assembly. An aluminum model of the high accuracy sun sensor (HASS) was also designed and fabricated. A number of fiber optic tapers for the camera assembly were also coated with indium tin oxide and phosphor for testing and evaluation by MSFC. A large number of the SXI optical bench parts were also redesigned and simplified for a prototype telescope. These parts include the forward and rear support flanges, front aperture plate, the graphite epoxy optical bench and a test fixture for the prototype telescope. More than fifty (50) drawings were generated for various components of the prototype telescope. Some of these parts were subsequently fabricated at UAH machine shop or at MSFC or by the outside contractors. UAH also provide technical support to MSFC staff for a number of preliminary and critical design reviews. These design reviews included PDR and CDR for the mirror assembly by United Technologies Optical Systems (UTOS), and the program quarterly reviews, and SXI PDR and CDR. UAH staff also regularly attended the monthly status reviews, and made a significant number of suggestions to improve the design, assembly and alignment of the telescope. Finally, a high level assembly and alignment plan for the entire telescope was prepared by UAH. This plan addresses the sequence of assembly, the required assembly and alignment tolerances, and the methods to verify the alignment at each step during the assembly process. This assembly and alignment plan will be used to assemble and integrate the engineering model (EM) of the telescope. Later on, based on this plan more detailed assembly and alignment procedures will be developed for the lower-level assemblies of SXI.

Design of automatic mobile trolley using ultrasonic sensors

NASA Astrophysics Data System (ADS)

Dodi Suryanto, Eka; Siagian, Hendrik; Perangin-Angin, Despaleri; Sashanti, Rahayu; Yogen, Suthes

2018-04-01

An automatic mobile trolley was a prototype of wheel robot that serves as a trolley or shopping cart. This paper proposed an automatic mobile trolley using ultrasonic sensors. It can follow human movement automatically. It did not need to be encouraged or withdrawn. It would make an easier shopping for people as customers. The trolley controlled by a microcontroller module unit. It can stop, turn right, turn left, forward and backward. It can follow wherever they go, during they were in range. Based on the test results, the trolley succeeded to move forward by 80%, move backward 80%, turn left, 70%, turn right 70%, and stop 80%.

Long-term results of two consecutive trials in childhood acute lymphoblastic leukaemia performed by the Spanish Cooperative Group for Childhood Acute Lymphoblastic Leukemia Group (SHOP) from 1989 to 1998.

PubMed

Badell, Isabel; Muñoz, Arturo; Estella, Jesús; Fernández-Delgado, Rafael; Javier, Germán; Verdeguer, Amparo; Cubells, Josep

2008-02-01

The first multi-centric protocol for childhood acute lymphoblastic leukaemia (ALL) treatment in Spain started in 1989 and was conducted by the Spanish Pediatric Hematology and Oncology Societies. A total of 673 patients were included in two consecutive trials, SHOP-89 (1989-1993) and SHOP- 94 (1994-1998). Approximately 67% of the children diagnosed with ALL in Spain during this period were enrolled in these trials. The 250 eligible patients enrolled in the SHOP- 89 study were stratified to either a standard or a high-risk group. Therapy schedule was based on the central nervous system (CNS) therapy designed by St Jude CRH and the Children's Cancer Group, and the post-induction intensification developed by the BFM group. In the SHOP-94 study, a further high-risk group was included in the stratification of the 423 enrolled patients. The therapeutic protocol was characterised by intensification of systemic chemotherapy and the administration of cranial radiotherapy only to patients at high risk of relapse or with CNS involvement at diagnosis. Event-free survival (EFS) increased from 0.57+/- 0.03 at 15 years in SHOP-89, to 0.68+/-0.03 at 11 years in SHOP-94 (p=0.01). Relapse rate decreased from SHOP-89 to SHOP-94: 0.38 vs. 0.25 (p=0.01). CNS relapse rate was 9.1% in SHOP-89 and 4.6% in SHOP-94 (p=0.001). EFS in patients with T-immunophenotype was 0.40+/-0.08 in SHOP-89 and 0.44+/-0.06 in SHOP-94 (p=ns). Our therapeutic results evidence a significant improvement in EFS and systemic and CNS relapse rates among the two consecutive trials after modification of patient stratification and intensification of systemic chemotherapy.

Tightening the Dutch coffee shop policy: Evaluation of the private club and the residence criterion.

PubMed

van Ooyen-Houben, Marianne M J; Bieleman, Bert; Korf, Dirk J

2016-05-01

The Dutch coffee shop policy was tightened in 2012. Two additional criteria that coffee shops must adhere to in order for them to be tolerated came into force: the private club and the residence criterion. Coffee shops were only permitted to give access to members and only residents of the Netherlands were permitted to become a member. This tightened policy sought to make coffee shops smaller and more controllable, to reduce the nuisance associated with coffee shops and to reduce the number of foreign visitors attracted by the coffee shops. Enforcement began in the southern provinces. The private club criterion was abolished at the end of 2012. A sample of fourteen municipalities with coffee shops was drawn. Seven in the south were treated as an 'experimental group' and the others as 'comparison group'. A baseline assessment and follow-ups at six and 18 months were performed. A combination of methods was applied: interviews with local experts, surveys with neighbourhood residents, coffee shop visitors and cannabis users, and ethnographic field work. Drugs tourism to coffee shops swiftly declined in 2012. The coffee shops also lost a large portion of their local customers, since users did not want to register as a member. The illegal market expanded. Neighbourhood residents experienced a greater amount of nuisance caused by dealer activities. After abolishment of the private club criterion, residents of the Netherlands largely returned to the coffee shops. Drug tourists still remained largely absent. Neighbourhood residents experienced more nuisance from coffee shops again. Illegal cannabis sale was tempered. No effect on cannabis use was found. The quick and robust shifts in the users' market in reaction to the policy changes illustrate the power of policy, but also the limitations caused by the dynamic and resilient nature of the Dutch cannabis supply market. Copyright © 2016 Elsevier B.V. All rights reserved.

30 CFR 57.4532 - Blacksmith shops.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Blacksmith shops. 57.4532 Section 57.4532 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Control Installation/construction/maintenance § 57.4532 Blacksmith shops. Blacksmith shops located on the...

30 CFR 57.4532 - Blacksmith shops.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Blacksmith shops. 57.4532 Section 57.4532 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Control Installation/construction/maintenance § 57.4532 Blacksmith shops. Blacksmith shops located on the...

30 CFR 57.4532 - Blacksmith shops.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Blacksmith shops. 57.4532 Section 57.4532 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Control Installation/construction/maintenance § 57.4532 Blacksmith shops. Blacksmith shops located on the...

30 CFR 57.4532 - Blacksmith shops.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Blacksmith shops. 57.4532 Section 57.4532 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Control Installation/construction/maintenance § 57.4532 Blacksmith shops. Blacksmith shops located on the...

Shopping Centers: Their Development and Impact on a Community.

ERIC Educational Resources Information Center

Berezowski, P. E.; And Others

Presenting extensive background material on the development of shopping centers, this paper includes elementary and junior high school outdoor education activities centering upon shopping center studies. Background material includes analysis of the following: shopping center types (architecture, regional location, etc); land use (guidelines for…

12. SW corner of 2nd floor of Tender Frame Shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. SW corner of 2nd floor of Tender Frame Shop showing heating duct and diffuser. - Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, Tender Frame Shop, Bounded by West Broad, Jones, West Boundary & Hull Streets, Savannah, Chatham County, GA

VIEW OF TURNTABLE, WITH CAR MACHINE SHOP AND PLANING MILL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF TURNTABLE, WITH CAR MACHINE SHOP AND PLANING MILL IN THE BACKGROUND AND ERECTING/MACHINE SHOP AT RIGHT, LOOKING EAST. ATSF 5021 2-10-4 STEAM LOCOMOTIVE IS ON TURNTABLE. - Southern Pacific, Sacramento Shops, 111 I Street, Sacramento, Sacramento County, CA

Looking south at, left to right, Heavy Equipment Shop (Bldg. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking south at, left to right, Heavy Equipment Shop (Bldg. 188), C.W.E. Office (Bldg. 130), Boiler Shop (Bldg. 152), and canopy over drop table pits - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Looking west at Machine Shop (Bldg. 163) north bay interior. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking west at Machine Shop (Bldg. 163) north bay interior. Note the Shaw 15-ton bridge crane and pits between the rails of several tracks - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

Baby boomers' food shopping habits. Relationships with demographics and personal values.

PubMed

Worsley, Anthony; Wang, Wei C; Hunter, Wendy

2010-12-01

The purpose of this study was to examine baby boomers' food shopping behaviours and to investigate their relationships with demographics and personal values. A questionnaire concerning food shopping behaviours, personal values and demographics was mailed to a random sample of 2975 people aged 40-70 years in Victoria, Australia. Usable questionnaires of 1031 were obtained. Structural equation modelling was employed for data analyses. The analyses revealed that demographics and personal values influenced shopping behaviours via different pathways among male and female baby boomers. For example, self-direction positively impacted on shopping planning for men but negatively influenced price minimization for women. Among women only, age was positively related to shopping planning and negatively to price minimization. Thus, both personal values and demographics influenced baby boomers' shopping behaviours. Since values are more likely to be amenable to change than demographics, segmentation of the population via value orientations would facilitate targeted interventions to promote healthy food shopping. Copyright © 2010 Elsevier Ltd. All rights reserved.

Relevance of air conditioning for 222Radon concentration in shops of the Savona Province, Italy.

PubMed

Panatto, Donatella; Ferrari, Paola; Lai, Piero; Gallelli, Giovanni

2006-02-15

Radon (222Rn) concentration was evaluated in shops of the Savona Province, Italy, between summer 2002 and winter 2002-2003. The main characteristics of each shops were recorded through a questionnaire investigating the ventilation rate and factors related to 222Rn precursors in the soil and the construction materials. The main variables that were related to radon concentration were the following: age of the building, level of the shop above ground, season of the year, wind exposure, active windows, and type of heating system. Shops equipped with individual air heating/conditioning systems exhibited radon concentrations that were three times higher than those of shops heated by centralized furnaces. Our data indicate that the level of pollution in the shops was of medium level, with an expected low impact on the salespersons' health. Only in wintertime, the action level of 200 Bq m(-3) for the confined environment was reached in 10 shops equipped with individual air heating/conditioning systems.

Mercury Shopping Cart Interface

NASA Technical Reports Server (NTRS)

Pfister, Robin; McMahon, Joe

2006-01-01

Mercury Shopping Cart Interface (MSCI) is a reusable component of the Power User Interface 5.0 (PUI) program described in another article. MSCI is a means of encapsulating the logic and information needed to describe an orderable item consistent with Mercury Shopping Cart service protocol. Designed to be used with Web-browser software, MSCI generates Hypertext Markup Language (HTML) pages on which ordering information can be entered. MSCI comprises two types of Practical Extraction and Report Language (PERL) modules: template modules and shopping-cart logic modules. Template modules generate HTML pages for entering the required ordering details and enable submission of the order via a Hypertext Transfer Protocol (HTTP) post. Shopping cart modules encapsulate the logic and data needed to describe an individual orderable item to the Mercury Shopping Cart service. These modules evaluate information entered by the user to determine whether it is sufficient for the Shopping Cart service to process the order. Once an order has been passed from MSCI to a deployed Mercury Shopping Cart server, there is no further interaction with the user.

78 FR 25347 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-30

.... Specifically, BNSF and UP seek a waiver of compliance from 49 CFR 232.305(b)(2) for railroad cars tested with automatic single car test devices (ASCTD). The current rule stipulates that if a car is on a shop or repair track for any reason and has not had a single car air brake test within the previous 12-month period, a...

View of building 11070, with building 11050 in the background ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of building 11070, with building 11050 in the background (left side). Looking northeast. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

View of building 11050, showing two additions on east and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of building 11050, showing two additions on east and north side. Looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

View of building 11070 showing vents and forced air system ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of building 11070 showing vents and forced air system on east side, looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

ShopComm: Community-Supported Online Shopping for Older Adults.

PubMed

Gorkovenko, Katerina; Tigwell, Garreth W; Norrie, Christopher S; Waite, Miriam; Herron, Daniel

2017-01-01

The United Kingdom has an ageing population whose members experience significant life transitions as they grow older, for example, losing mobility due to deteriorating health. For these adults, digital technology has the potential to sustain their independence and improve their quality of life. However older adults can be reluctant to use digital solutions. In this paper, we review a local charity providing a grocery shopping service for older adults who are unable to go themselves. We explore how older adults perceive the benefits and drawbacks of both physical and digital shopping. Using these insights, we designed ShopComm to enable and support older adults with mobility impairments to shop online.

"Say it...near the flower shop": further evidence of the effect of flowers on mating.

PubMed

Guéguen, Nicolas

2012-01-01

For millennia, flowers have been used to convey romance. In this study, 18-25-year-old women (N = 600) walking alone in a shopping mall were approached by an attractive 20-year-old male-confederate who solicited them for their phone number. The women were solicited as they were walking in the area of a flower shop, a cake shop, or a women's shoes shop. It was found that women agreed more favorably to the confederate's courtship solicitation when solicited in the area of the flower shop. Positive mood induced by exposure to flowers was used to explain these results.

30 CFR 75.343 - Underground shops.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Underground shops. 75.343 Section 75.343... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.343 Underground shops. (a) Underground shops shall be equipped with an automatic fire suppression system meeting the requirements of § 75.1107...

30 CFR 75.343 - Underground shops.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Underground shops. 75.343 Section 75.343... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.343 Underground shops. (a) Underground shops shall be equipped with an automatic fire suppression system meeting the requirements of § 75.1107...

45 CFR 155.715 - Eligibility determination process for SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Eligibility determination process for SHOP. 155... ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.715 Eligibility determination process for SHOP. (a) General requirement. Before permitting the purchase of coverage in a QHP...

30 CFR 75.343 - Underground shops.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Underground shops. 75.343 Section 75.343... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.343 Underground shops. (a) Underground shops shall be equipped with an automatic fire suppression system meeting the requirements of § 75.1107...

5 CFR 532.265 - Special wage schedules for apprentices and shop trainees.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and shop trainees. 532.265 Section 532.265 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... schedules for apprentices and shop trainees. (a) Agencies may establish special wage schedules for apprentices and shop trainees who are included in: (1) Formal apprenticeship programs involving training for...

48 CFR 52.236-21 - Specifications and Drawings for Construction.

Code of Federal Regulations, 2013 CFR

2013-10-01

... place, that is furnished and installed. (d) Shop drawings means drawings, submitted to the Government by... shop drawings delivered under this contract. (e) If this contract requires shop drawings, the... review. Shop drawings submitted to the Contracting Officer without evidence of the Contractor's approval...

5 CFR 532.265 - Special wage schedules for apprentices and shop trainees.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and shop trainees. 532.265 Section 532.265 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... schedules for apprentices and shop trainees. (a) Agencies may establish special wage schedules for apprentices and shop trainees who are included in: (1) Formal apprenticeship programs involving training for...

5 CFR 532.265 - Special wage schedules for apprentices and shop trainees.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and shop trainees. 532.265 Section 532.265 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... schedules for apprentices and shop trainees. (a) Agencies may establish special wage schedules for apprentices and shop trainees who are included in: (1) Formal apprenticeship programs involving training for...

5 CFR 532.265 - Special wage schedules for apprentices and shop trainees.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and shop trainees. 532.265 Section 532.265 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... schedules for apprentices and shop trainees. (a) Agencies may establish special wage schedules for apprentices and shop trainees who are included in: (1) Formal apprenticeship programs involving training for...

17. Interior oblique view, original Cooper's Shop, Engine Stores Building, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Interior oblique view, original Cooper's Shop, Engine Stores Building, Southern Pacific Railroad Carlin Shops, view to southeast (90mm lens). Note the original window and sealed doorway. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

48 CFR 52.236-21 - Specifications and Drawings for Construction.

Code of Federal Regulations, 2014 CFR

2014-10-01

... place, that is furnished and installed. (d) Shop drawings means drawings, submitted to the Government by... shop drawings delivered under this contract. (e) If this contract requires shop drawings, the... review. Shop drawings submitted to the Contracting Officer without evidence of the Contractor's approval...

48 CFR 52.236-21 - Specifications and Drawings for Construction.

Code of Federal Regulations, 2011 CFR

2011-10-01

... place, that is furnished and installed. (d) Shop drawings means drawings, submitted to the Government by... shop drawings delivered under this contract. (e) If this contract requires shop drawings, the... review. Shop drawings submitted to the Contracting Officer without evidence of the Contractor's approval...

30 CFR 75.343 - Underground shops.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Underground shops. 75.343 Section 75.343... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.343 Underground shops. (a) Underground shops shall be equipped with an automatic fire suppression system meeting the requirements of § 75.1107...

48 CFR 52.236-21 - Specifications and Drawings for Construction.

Code of Federal Regulations, 2012 CFR

2012-10-01

... place, that is furnished and installed. (d) Shop drawings means drawings, submitted to the Government by... shop drawings delivered under this contract. (e) If this contract requires shop drawings, the... review. Shop drawings submitted to the Contracting Officer without evidence of the Contractor's approval...

1. Photocopy of photograph of Blacksmith Shop. Original on file ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Photocopy of photograph of Blacksmith Shop. Original on file with the Payette National Forest, Supervisor's Office, McCall, Idaho. BLACKSMITH SHOP CA. 1935, FACING NORTH. BARN IS IN BACKGROUND. - Hornet Ranger Station, Blacksmith Shop, Forest Service Road No. 50002, Council, Adams County, ID

5 CFR 532.265 - Special wage schedules for apprentices and shop trainees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and shop trainees. 532.265 Section 532.265 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... schedules for apprentices and shop trainees. (a) Agencies may establish special wage schedules for apprentices and shop trainees who are included in: (1) Formal apprenticeship programs involving training for...

A Qualitative Exploration of the Role of Vape Shop Environments in Supporting Smoking Abstinence.

PubMed

Ward, Emma; Cox, Sharon; Dawkins, Lynne; Jakes, Sarah; Holland, Richard; Notley, Caitlin

2018-02-09

E-cigarettes are the most popular method of quitting smoking in England and most are purchased in specialist vape shops. This qualitative study explores how the vape shop environment is experienced by quitters to support smoking abstinence. Semi-structured qualitative interviews were conducted to elicit experiences of e-cigarette use, including experiences of vape shops, in 40 people who had used e-cigarettes in a quit attempt. Observations of six shops in a range of locations were also undertaken. Interview and observation data were analysed using inductive thematic analysis and triangulated. At an individual level, smoking abstinence was supported through shop assistants' attempts to understand customers' smoking preferences in order to: (i) tailor advice about the most appropriate product; and (ii) offer an ongoing point of contact for practical help. At an interpersonal level, shops offered opportunity to socialise and reinforce a vaping identity, although the environment was perceived as intimidating for some (e.g., new and female users). At a structural level, shops ensured easy access to products perceived to be good value by customers and had adapted to legislative changes. Vape shops can provide effective behavioural support to quitters to maintain smoking abstinence. Health professionals could capitalise on this through partnership working with shops, to ensure best outcomes for clients wanting to use e-cigarettes to quit smoking.

A Qualitative Exploration of the Role of Vape Shop Environments in Supporting Smoking Abstinence

PubMed Central

Jakes, Sarah; Holland, Richard; Notley, Caitlin

2018-01-01

E-cigarettes are the most popular method of quitting smoking in England and most are purchased in specialist vape shops. This qualitative study explores how the vape shop environment is experienced by quitters to support smoking abstinence. Semi-structured qualitative interviews were conducted to elicit experiences of e-cigarette use, including experiences of vape shops, in 40 people who had used e-cigarettes in a quit attempt. Observations of six shops in a range of locations were also undertaken. Interview and observation data were analysed using inductive thematic analysis and triangulated. At an individual level, smoking abstinence was supported through shop assistants’ attempts to understand customers’ smoking preferences in order to: (i) tailor advice about the most appropriate product; and (ii) offer an ongoing point of contact for practical help. At an interpersonal level, shops offered opportunity to socialise and reinforce a vaping identity, although the environment was perceived as intimidating for some (e.g., new and female users). At a structural level, shops ensured easy access to products perceived to be good value by customers and had adapted to legislative changes. Vape shops can provide effective behavioural support to quitters to maintain smoking abstinence. Health professionals could capitalise on this through partnership working with shops, to ensure best outcomes for clients wanting to use e-cigarettes to quit smoking. PMID:29425117

Georgia Vocational Student Assessment Project. Final Report.

ERIC Educational Resources Information Center

Vocational Technical Education Consortium of States, Atlanta, GA.

A project was conducted to develop vocational education tests for use in Georgia secondary schools, specifically for welding, machine shop, and sheet metal courses. The project team developed an outline of an assessment model that included the following components: (1) select a program for use in developing test items; (2) verify duties, tasks,…

Implementing the Affordable Care Act: State Action to Establish SHOP Marketplaces.

PubMed

Dash, Sarah J; Lucia, Kevin W; Thomas, Amy

2014-03-01

The Affordable Care Act seeks to help small employers offer coverage by reforming the small-group market and establishing Small Business Health Options Program (SHOP) marketplaces. Seventeen states and the District of Columbia chose to operate their own SHOP marketplaces in 2014, with the federal government operating the SHOP marketplace in 33 states. This brief examines state decisions to enhance the value of SHOP marketplaces for small employers and finds that most have set predictable participation and eligibility requirements and will offer a competitive choice of insurers and plans. States also are seeking to facilitate small employers' shopping experience through online tools and access to personalized assistance. While not all SHOP marketplaces are yet functioning as intended, their establishment offers an opportunity to identify successful strategies for improving the affordability and accessibility of coverage for small employers.

Farmers' market shopping and dietary behaviours among Supplemental Nutrition Assistance Program participants.

PubMed

Jilcott Pitts, Stephanie B; Wu, Qiang; Demarest, Chelsea L; Dixon, Crystal E; Dortche, Ciarra Jm; Bullock, Sally L; McGuirt, Jared; Ward, Rachel; Ammerman, Alice S

2015-09-01

Because farmers' markets include a variety of fruits and vegetables, shopping at farmers' markets would likely improve diet quality among low-income consumers, as well as promote sustainable direct farm-to-consumer business models. However, not much is known about how to promote farmers' market shopping among low-income consumers. Therefore, the purpose of the present paper was to examine barriers to and facilitators of shopping at farmers' markets and associations between shopping at farmers' markets and self-reported dietary behaviours (fruit and vegetable, sugar-sweetened beverage and fast-food consumption) and BMI. Cross-sectional analyses of associations between farmers' market shopping frequency, awareness of markets, access to markets, dietary behaviours and BMI. Department of Social Services, Pitt County, eastern North Carolina, USA. Between April and July 2013, Supplemental Nutrition Assistance Program (SNAP) participants (n 205) completed a quantitative survey. Barriers to shopping at farmers' markets included does not accept SNAP/electronic benefit transfer, out of the way and lack of transportation. Farmers' market shopping was associated with awareness of farmers' markets (estimate =0·18 (se 0·04), P<0·001). Fruit and vegetable consumption was positively associated with farmers' market shopping (estimate =1·06 (se 0·32), P=0·001). Our study is one of the first to examine SNAP participants' farmers' market shopping, distance to farmers' markets and dietary behaviours. Barriers to shopping at farmers' markets and increasing awareness of existing markets should be addressed in future interventions to increase SNAP participants' use of farmers' markets, ultimately improving diet quality in this high-risk group.

Using health primes to reduce unhealthy snack purchases among overweight consumers in a grocery store.

PubMed

Papies, E K; Potjes, I; Keesman, M; Schwinghammer, S; van Koningsbruggen, G M

2014-04-01

Healthy-eating intentions of overweight individuals are often thwarted by the presence of attractive food temptations in grocery stores and the home environment. To support healthy-eating intentions, we tested the effectiveness of a simple health prime to reduce the purchases of energy-dense snack foods in a grocery store among overweight individuals. This field experiment had a 2 (condition: health prime vs control) × 2 (weight status: overweight vs normal weight) between-participants design. Customers of a grocery store were handed a recipe flyer that either contained a health and diet prime, or not. Participants' weight and height, as well as their attention to and awareness of the prime during shopping, were assessed by means of a questionnaire. The purchase of unhealthy snack foods was assessed by means of the receipt. Results showed that the health prime reduced snack purchases compared with the control condition among overweight and obese participants. When primed, overweight and obese participants bought almost 75% fewer snacks than when not primed. Additional analyses showed that although the prime worked only when customers paid initial attention to the flyer that contained the health prime, no conscious awareness of the prime during grocery shopping was necessary for these effects. These findings suggest that health priming can lead to healthier grocery shopping among overweight consumers, without relying on conscious awareness during shopping. This makes priming a highly viable intervention tool to facilitate healthy food choices. Such tools are especially relevant in the setting of grocery shopping, given that they have direct effects on eating in the home environment and thus for longer-term weight management.

Piloting the global subsidy: the impact of subsidized artemisinin-based combination therapies distributed through private drug shops in rural Tanzania.

PubMed

Sabot, Oliver J; Mwita, Alex; Cohen, Justin M; Ipuge, Yahya; Gordon, Megumi; Bishop, David; Odhiambo, Moses; Ward, Lorrayne; Goodman, Catherine

2009-09-02

WHO estimates that only 3% of fever patients use recommended artemisinin-based combination therapies (ACTs), partly reflecting their high prices in the retail sector from where many patients seek treatment. To overcome this challenge, a global ACT subsidy has been proposed. We tested this proposal through a pilot program in rural Tanzania. Three districts were assigned to serve either as a control or to receive the subsidy plus a package of supporting interventions. From October 2007, ACTs were sold at a 90% subsidy through the normal private supply chain to intervention district drug shops. Data were collected at baseline and during intervention using interviews with drug shop customers, retail audits, mystery shoppers, and audits of public and NGO facilities. The proportion of consumers in the intervention districts purchasing ACTs rose from 1% at baseline to 44.2% one year later (p<0.001), and was significantly higher among consumers purchasing for children under 5 than for adults (p = 0.005). No change in ACT usage was observed in the control district. Consumers paid a mean price of $0.58 for ACTs, which did not differ significantly from the price paid for sulphadoxine-pyrimethamine, the most common alternative. Drug shops in population centers were significantly more likely to stock ACTs than those in more remote areas (p<0.001). A subsidy introduced at the top of the private sector supply chain can significantly increase usage of ACTs and reduce their retail price to the level of common monotherapies. Additional interventions may be needed to ensure access to ACTs in remote areas and for poorer individuals who appear to seek treatment at drug shops less frequently. Controlled-Trials.com ISRCTN39125414.

Healthy food access for urban food desert residents: examination of the food environment, food purchasing practices, diet and BMI.

PubMed

Dubowitz, Tamara; Zenk, Shannon N; Ghosh-Dastidar, Bonnie; Cohen, Deborah A; Beckman, Robin; Hunter, Gerald; Steiner, Elizabeth D; Collins, Rebecca L

2015-08-01

To provide a richer understanding of food access and purchasing practices among US urban food desert residents and their association with diet and BMI. Data on food purchasing practices, dietary intake, height and weight from the primary food shopper in randomly selected households (n 1372) were collected. Audits of all neighbourhood food stores (n 24) and the most-frequented stores outside the neighbourhood (n 16) were conducted. Aspects of food access and purchasing practices and relationships among them were examined and tests of their associations with dietary quality and BMI were conducted. Two low-income, predominantly African-American neighbourhoods with limited access to healthy food in Pittsburgh, PA, USA. Household food shoppers. Only one neighbourhood outlet sold fresh produce; nearly all respondents did major food shopping outside the neighbourhood. Although the nearest full-service supermarket was an average of 2·6 km from their home, respondents shopped an average of 6·0 km from home. The average trip was by car, took approximately 2 h for the round trip, and occurred two to four times per month. Respondents spent approximately $US 37 per person per week on food. Those who made longer trips had access to cars, shopped less often and spent less money per person. Those who travelled further when they shopped had higher BMI, but most residents already shopped where healthy foods were available, and physical distance from full-service supermarkets was unrelated to weight or dietary quality. Improved access to healthy foods is the target of current policies meant to improve health. However, distance to the closest supermarket might not be as important as previously thought, and thus policy and interventions that focus merely on improving access may not be effective.

Piloting the Global Subsidy: The Impact of Subsidized Artemisinin-Based Combination Therapies Distributed through Private Drug Shops in Rural Tanzania

PubMed Central

Sabot, Oliver J.; Mwita, Alex; Cohen, Justin M.; Ipuge, Yahya; Gordon, Megumi; Bishop, David; Odhiambo, Moses; Ward, Lorrayne; Goodman, Catherine

2009-01-01

Background WHO estimates that only 3% of fever patients use recommended artemisinin-based combination therapies (ACTs), partly reflecting their high prices in the retail sector from where many patients seek treatment. To overcome this challenge, a global ACT subsidy has been proposed. We tested this proposal through a pilot program in rural Tanzania. Methods/Principal Findings Three districts were assigned to serve either as a control or to receive the subsidy plus a package of supporting interventions. From October 2007, ACTs were sold at a 90% subsidy through the normal private supply chain to intervention district drug shops. Data were collected at baseline and during intervention using interviews with drug shop customers, retail audits, mystery shoppers, and audits of public and NGO facilities. The proportion of consumers in the intervention districts purchasing ACTs rose from 1% at baseline to 44.2% one year later (p<0.001), and was significantly higher among consumers purchasing for children under 5 than for adults (p = 0.005). No change in ACT usage was observed in the control district. Consumers paid a mean price of $0.58 for ACTs, which did not differ significantly from the price paid for sulphadoxine-pyrimethamine, the most common alternative. Drug shops in population centers were significantly more likely to stock ACTs than those in more remote areas (p<0.001). Conclusions A subsidy introduced at the top of the private sector supply chain can significantly increase usage of ACTs and reduce their retail price to the level of common monotherapies. Additional interventions may be needed to ensure access to ACTs in remote areas and for poorer individuals who appear to seek treatment at drug shops less frequently. Trial Registration Controlled-Trials.com ISRCTN39125414. PMID:19724644

Family food purchases of high- and low-calorie foods in full-service supermarkets and other food retailers by Black women in an urban US setting.

PubMed

Chrisinger, Benjamin W; DiSantis, Katherine Isselmann; Hillier, Amy E; Kumanyika, Shiriki K

2018-06-01

Public health interventions to increase supermarket access assume that shopping in supermarkets is associated with healthier food purchases compared to other store types. To test this assumption, we compared purchasing patterns by store-type for certain higher-calorie, less healthy foods (HCF) and lower-calorie, healthier foods (LCF) in a sample of 35 black women household shoppers in Philadelphia, PA. Data analyzed were from 450 food shopping receipts collected by these shoppers over four-week periods in 2012. We compared the likelihood of purchasing the HCF (sugar-sweetened beverages, sweet/salty snacks, and grain-based snacks) and LCF (low-fat dairy, fruits, and vegetables) at full-service supermarkets and six other types of food retailers, using generalized estimating equations. Thirty-seven percent of participants had household incomes at or below the poverty line, and 54% had a BMI >30. Participants shopped primarily at full-service supermarkets (55%) or discount/limited assortment supermarkets (22%), making an average of 11 shopping trips over a 4-week period and spending mean (SD) of $350 ($222). Of full-service supermarket receipts, 64% included at least one HCF item and 58% at least one LCF. Most trips including HCF (58%) and LCF (60%) expenditures were to full-service or discount/limited assortment supermarkets rather than smaller stores. Spending a greater percent of total dollars in full-service supermarkets was associated with spending more on HCF (p = 0.03) but not LCF items (p = 0.26). These findings in black women suggest a need for more attention to supermarket interventions that change retailing practices and/or consumer shopping behaviors related to foods in the HCF categories examined.

Using health primes to reduce unhealthy snack purchases among overweight consumers in a grocery store

PubMed Central

Papies, E K; Potjes, I; Keesman, M; Schwinghammer, S; van Koningsbruggen, G M

2014-01-01

Objective: Healthy-eating intentions of overweight individuals are often thwarted by the presence of attractive food temptations in grocery stores and the home environment. To support healthy-eating intentions, we tested the effectiveness of a simple health prime to reduce the purchases of energy-dense snack foods in a grocery store among overweight individuals. Design: This field experiment had a 2 (condition: health prime vs control) × 2 (weight status: overweight vs normal weight) between-participants design. Method: Customers of a grocery store were handed a recipe flyer that either contained a health and diet prime, or not. Participants' weight and height, as well as their attention to and awareness of the prime during shopping, were assessed by means of a questionnaire. The purchase of unhealthy snack foods was assessed by means of the receipt. Results: Results showed that the health prime reduced snack purchases compared with the control condition among overweight and obese participants. When primed, overweight and obese participants bought almost 75% fewer snacks than when not primed. Additional analyses showed that although the prime worked only when customers paid initial attention to the flyer that contained the health prime, no conscious awareness of the prime during grocery shopping was necessary for these effects. Conclusion: These findings suggest that health priming can lead to healthier grocery shopping among overweight consumers, without relying on conscious awareness during shopping. This makes priming a highly viable intervention tool to facilitate healthy food choices. Such tools are especially relevant in the setting of grocery shopping, given that they have direct effects on eating in the home environment and thus for longer-term weight management. PMID:23887063

The Shopping Mall: A Teenager Hangout.

ERIC Educational Resources Information Center

Anthony, Kathryn H.

1985-01-01

Investigated teenagers' use of the shopping mall as a "hangout" through interviews with 51 adolescents using the mall, and 10 hours of behavioral observations. Results indicated that many teenagers visit the shopping center regularly to watch members of the opposite sex, play video games, see friends, shop, and people-watch. (Author/NRB)

45 CFR 157.205 - Qualified employer participation process in a SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Qualified employer participation process in a SHOP... TO HEALTH CARE ACCESS EMPLOYER INTERACTIONS WITH EXCHANGES AND SHOP PARTICIPATION Standards for Qualified Employers § 157.205 Qualified employer participation process in a SHOP. (a) General requirements...

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

45 CFR 157.205 - Qualified employer participation process in a SHOP.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Qualified employer participation process in a SHOP... TO HEALTH CARE ACCESS EMPLOYER INTERACTIONS WITH EXCHANGES AND SHOP PARTICIPATION Standards for Qualified Employers § 157.205 Qualified employer participation process in a SHOP. (a) General requirements...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

45 CFR 157.200 - Eligibility of qualified employers to participate in a SHOP.

Code of Federal Regulations, 2012 CFR

2012-10-01

... in a SHOP. 157.200 Section 157.200 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS EMPLOYER INTERACTIONS WITH EXCHANGES AND SHOP PARTICIPATION Standards for Qualified Employers § 157.200 Eligibility of qualified employers to participate in a SHOP. (a...

14 CFR 147.19 - Materials, special tools, and shop equipment requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Materials, special tools, and shop... TECHNICIAN SCHOOLS Certification Requirements § 147.19 Materials, special tools, and shop equipment... additional rating, must have an adequate supply of material, special tools, and such of the shop equipment as...

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

14 CFR 147.19 - Materials, special tools, and shop equipment requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Materials, special tools, and shop... TECHNICIAN SCHOOLS Certification Requirements § 147.19 Materials, special tools, and shop equipment... additional rating, must have an adequate supply of material, special tools, and such of the shop equipment as...

40 CFR 63.7782 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2014 CFR

2014-07-01

... oxygen process furnace (BOPF) shop at your integrated iron and steel manufacturing facility. (c) This... blast furnace casthouse; and the BOPF shop including each individual BOPF and shop ancillary operations... plant, blast furnace, or BOPF shop at your integrated iron and steel manufacturing facility is existing...

40 CFR 63.7782 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2013 CFR

2013-07-01

... oxygen process furnace (BOPF) shop at your integrated iron and steel manufacturing facility. (c) This... blast furnace casthouse; and the BOPF shop including each individual BOPF and shop ancillary operations... plant, blast furnace, or BOPF shop at your integrated iron and steel manufacturing facility is existing...

ENVIRONMENTAL ASSESSMENT OF SHOP TOWEL USAGE IN THE AUTOMOTIVE AND PRINTING INDUSTRIES

EPA Science Inventory

This assessment identifies the environmental impacts and usage trends of shop towels in the printing and automotive repair industries. The shop towels are used to clean equipment and to wipe up contaminants for a variety of operations. Four types of shop towels were evaluated; wo...

40 CFR 63.7782 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2012 CFR

2012-07-01

... oxygen process furnace (BOPF) shop at your integrated iron and steel manufacturing facility. (c) This... blast furnace casthouse; and the BOPF shop including each individual BOPF and shop ancillary operations... plant, blast furnace, or BOPF shop at your integrated iron and steel manufacturing facility is existing...

7. Detail, segmentalarched, 12/12 doublehung windows (lower sash boarded against ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Detail, segmental-arched, 12/12 double-hung windows (lower sash boarded against entry), southeast elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northwest (210mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

45 CFR 157.200 - Eligibility of qualified employers to participate in a SHOP.

Code of Federal Regulations, 2013 CFR

2013-10-01

... in a SHOP. 157.200 Section 157.200 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS EMPLOYER INTERACTIONS WITH EXCHANGES AND SHOP PARTICIPATION Standards for Qualified Employers § 157.200 Eligibility of qualified employers to participate in a SHOP. (a...

14 CFR 147.19 - Materials, special tools, and shop equipment requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Materials, special tools, and shop... TECHNICIAN SCHOOLS Certification Requirements § 147.19 Materials, special tools, and shop equipment... additional rating, must have an adequate supply of material, special tools, and such of the shop equipment as...

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

45 CFR 157.205 - Qualified employer participation process in a SHOP.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Qualified employer participation process in a SHOP... TO HEALTH CARE ACCESS EMPLOYER INTERACTIONS WITH EXCHANGES AND SHOP PARTICIPATION Standards for Qualified Employers § 157.205 Qualified employer participation process in a SHOP. (a) General requirements...

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

45 CFR 157.200 - Eligibility of qualified employers to participate in a SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... in a SHOP. 157.200 Section 157.200 Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS EMPLOYER INTERACTIONS WITH EXCHANGES AND SHOP PARTICIPATION Standards for Qualified Employers § 157.200 Eligibility of qualified employers to participate in a SHOP. (a...

14 CFR 147.19 - Materials, special tools, and shop equipment requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Materials, special tools, and shop... TECHNICIAN SCHOOLS Certification Requirements § 147.19 Materials, special tools, and shop equipment... additional rating, must have an adequate supply of material, special tools, and such of the shop equipment as...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

40 CFR 63.7782 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2011 CFR

2011-07-01

... oxygen process furnace (BOPF) shop at your integrated iron and steel manufacturing facility. (c) This... blast furnace casthouse; and the BOPF shop including each individual BOPF and shop ancillary operations... plant, blast furnace, or BOPF shop at your integrated iron and steel manufacturing facility is existing...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

40 CFR 63.7782 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2010 CFR

2010-07-01

... oxygen process furnace (BOPF) shop at your integrated iron and steel manufacturing facility. (c) This... blast furnace casthouse; and the BOPF shop including each individual BOPF and shop ancillary operations... plant, blast furnace, or BOPF shop at your integrated iron and steel manufacturing facility is existing...

48 CFR 1952.227-77 - Rights in shop drawings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Rights in shop drawings. 1952.227-77 Section 1952.227-77 Federal Acquisition Regulations System BROADCASTING BOARD OF GOVERNORS... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop...

Handbook for Trade and Industrial Shop Teachers.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

This handbook is intended to help teachers of pre-employment shop courses in organizing and delivering instruction in both the shop and classroom. Addressed in the guide are the following topics: the instructor's place in the local school organization; the instructor's job (objectives, advisory committees, occupational analysis, shop/classroom and…

30 CFR 75.343 - Underground shops.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Underground shops. 75.343 Section 75.343...-3 through § 75.1107-16, or be enclosed in a noncombustible structure or area. (b) Underground shops... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.343 Underground shops. (a) Underground...

Machine Shop (Bldg. 163) north bay, east end interior, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Machine Shop (Bldg. 163) north bay, east end interior, with a 250-ton Shaw bridge crane on the upper rails and two smaller P&H bridge cranes on the lower rails - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Boiler Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

2. TEST AREA 1115, A VIEW TO THE SOUTHEAST FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. TEST AREA 1-115, A VIEW TO THE SOUTHEAST FROM THE DECK OF TEST STAND 1-5. AT RIGHT IS BUILDING 8642, MACHINE SHOP FOR TEST STAND 1-5. AT LEFT IS BUILDING 8649, AND PART OF BUILDING 8647, TEST STAND 1-4, IS VISIBLE TO LEFT OF BLDG. 8649. (PANORAMA 1/2). - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Leuhman Ridge near Highways 58 & 395, Boron, Kern County, CA

Countergirl 2-27.13; Counterman, Lunchroom or Coffee Shop (hotel and rest.) 2-27.13--Technical Report on Standardization of the General Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Microbiological survey of mice (Mus musculus) purchased from commercial pet shops in Kanagawa and Tokyo, Japan.

PubMed

Hayashimoto, Nobuhito; Morita, Hanako; Ishida, Tomoko; Uchida, Ritsuki; Tanaka, Mai; Ozawa, Midori; Yasuda, Masahiko; Itoh, Toshio

2015-01-01

Information regarding the prevalence of infectious agents in mice in pet shops in Japan is scarce. This information is particularly useful for minimizing the risk of potential transmission of infections to laboratory mice. Therefore, we surveyed infectious agents in mice from pet shops in Kanagawa and Tokyo, Japan. The survey was conducted in 28 mice from 5 pet shops to screen for 47 items (17 viruses, 22 bacteria and fungi, 10 parasites) using culture tests, serology, PCR, and microscopy. The most common viral agent detected was murine norovirus (17 mice; 60.7%), followed by Theiler's murine encephalomyelitis virus (13 mice; 46.4%), and mouse hepatitis virus (12 mice; 42.8%). The most common agent amongst the bacteria and fungi was Pasteurella pneumotropica (10 mice; 35.7%), followed by Helicobacter ganmani and Pneumocystis murina (8 mice; 28.5%, for both). Tritrichomonas muris was the most common parasite (19 mice; 67.8%), followed by Spironucleus muris (13 mice; 46.4%), Aspiculuris tetraptera, and Syphacia obvelata (8 mice each; 28.5%). Remarkably, a zoonotic agent, Hymenolepis nana, was found in 7 mice (25%). Given these results, we suggest that the workers in laboratory animal facilities should recognize again the potential risks of mice outside of the laboratory animal facilities as an infectious source, and avoid keeping mice as pets or as feed for carnivorous reptiles as much as possible for risk management.

Analyzing the User Behavior toward Electronic Commerce Stimuli.

PubMed

Lorenzo-Romero, Carlota; Alarcón-Del-Amo, María-Del-Carmen; Gómez-Borja, Miguel-Ángel

2016-01-01

Based on the Stimulus-Organism-Response paradigm this research analyzes the main differences between the effects of two types of web technologies: Verbal web technology (i.e., navigational structure as utilitarian stimulus) versus non-verbal web technology (music and presentation of products as hedonic stimuli). Specific webmosphere stimuli have not been examined yet as separate variables and their impact on internal and behavioral responses seems unknown. Therefore, the objective of this research consists in analyzing the impact of these web technologies -which constitute the web atmosphere or webmosphere of a website- on shopping human behavior (i.e., users' internal states -affective, cognitive, and satisfaction- and behavioral responses - approach responses, and real shopping outcomes-) within the retail online store created by computer, taking into account some mediator variables (i.e., involvement, atmospheric responsiveness, and perceived risk). A 2 ("free" versus "hierarchical" navigational structure) × 2 ("on" versus "off" music) × 2 ("moving" versus "static" images) between-subjects computer experimental design is used to test empirically this research. In addition, an integrated methodology was developed allowing the simulation, tracking and recording of virtual user behavior within an online shopping environment. As main conclusion, this study suggests that the positive responses of online consumers might increase when they are allowed to freely navigate the online stores and their experience is enriched by animate gifts and music background. The effect caused by mediator variables modifies relatively the final shopping human behavior.

Online social networking addiction among college students in Singapore: Comorbidity with behavioral addiction and affective disorder.

PubMed

Tang, Catherine So-Kum; Koh, Yvaine Yee Woen

2017-02-01

This study aimed to determine the prevalence of addiction to social networking sites/platforms (SNS) and its comorbidity with other behavioral addiction and affective disorder among college students in Singapore. 1110 college students (age: M=21.46, SD=1.80) in Singapore completed measures assessing online social networking, unhealthy food intake and shopping addiction as well as depression, anxiety and mania. Descriptive analyses were conducted to investigate the prevalence and comorbidity of behavioral addiction and affective disorder. Chi-square tests were used to examine gender differences. The prevalence rates of SNS, food and shopping addiction were 29.5%, 4.7% and 9.3% respectively for the total sample. SNS addiction was found to co-occur with food addiction (3%), shopping addiction (5%), and both food and shopping addiction (1%). The comorbidity rates of SNS addiction and affective disorder were 21% for depression, 27.7% for anxiety, and 26.1% for mania. Compared with the total sample, students with SNS addiction reported higher comorbidity rates with other behavioral addiction and affective disorder. In general, females as compared to males reported higher comorbidity rates of SNS addiction and affective disorder. SNS addiction has a high prevalence rate among college students in Singapore. Students with SNS addiction were vulnerable to experience other behavior addiction as well as affective disorder, especially among females. Copyright © 2016. Published by Elsevier B.V.

Spatial ability in secondary school students: intra-sex differences based on self-selection for physical education.

PubMed

Tlauka, Michael; Williams, Jennifer; Williamson, Paul

2008-08-01

Past research has demonstrated consistent sex differences with men typically outperforming women on tests of spatial ability. However, less is known about intra-sex effects. In the present study, two groups of female students (physical education and non-physical education secondary students) and two corresponding groups of male students explored a large-scale virtual shopping centre. In a battery of tasks, spatial knowledge of the shopping centre as well as mental rotation ability were tested. Additional variables considered were circulating testosterone levels, the ratio of 2D:4D digit length, and computer experience. The results revealed both sex and intra-sex differences in spatial ability. Variables related to virtual navigation and computer ability and experience were found to be the most powerful predictors of group membership. Our results suggest that in female and male secondary students, participation in physical education and spatial skill are related.

PANORAMIC VIEW OF SHIPYARD NO. 3, LOOKING SOUTH. FROM LEFT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PANORAMIC VIEW OF SHIPYARD NO. 3, LOOKING SOUTH. FROM LEFT TO CENTER ARE THE FORGE SHOP, MACHINE SHOP, GENERAL WAREHOUSE, AND RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP. FROM CENTER TO RIGHT ARE THE FIVE BASINS - Rosie the Riveter National Historical Park, Richmond Shipyard No. 3, Point Potrero, Richmond, Contra Costa County, CA

41 CFR 109-27.5005 - Shop, bench, cupboard or site stock.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false Shop, bench, cupboard or site stock. 109-27.5005 Section 109-27.5005 Public Contracts and Property Management Federal Property....5005 Shop, bench, cupboard or site stock. Shop, bench, cupboard or site stocks are an accumulation of...

41 CFR 109-27.5005 - Shop, bench, cupboard or site stock.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Shop, bench, cupboard or site stock. 109-27.5005 Section 109-27.5005 Public Contracts and Property Management Federal Property....5005 Shop, bench, cupboard or site stock. Shop, bench, cupboard or site stocks are an accumulation of...

41 CFR 109-27.5005 - Shop, bench, cupboard or site stock.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false Shop, bench, cupboard or site stock. 109-27.5005 Section 109-27.5005 Public Contracts and Property Management Federal Property....5005 Shop, bench, cupboard or site stock. Shop, bench, cupboard or site stocks are an accumulation of...

41 CFR 109-27.5005 - Shop, bench, cupboard or site stock.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false Shop, bench, cupboard or site stock. 109-27.5005 Section 109-27.5005 Public Contracts and Property Management Federal Property....5005 Shop, bench, cupboard or site stock. Shop, bench, cupboard or site stocks are an accumulation of...

41 CFR 109-27.5005 - Shop, bench, cupboard or site stock.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false Shop, bench, cupboard or site stock. 109-27.5005 Section 109-27.5005 Public Contracts and Property Management Federal Property....5005 Shop, bench, cupboard or site stock. Shop, bench, cupboard or site stocks are an accumulation of...

14. BLACKSMITH SHOP IN THE CENTER OF PHOTOGRAPH. TO THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. BLACKSMITH SHOP IN THE CENTER OF PHOTOGRAPH. TO THE LEFT IS MACHINE SHOP No. 1, AND TO THE RIGHT IS THE CHIPPING YARD. THE RUINS IN THE FOREGROUND IS THE FORMER ELECTRIC DEPARTMENT. Jet Lowe, Photographer, 1989. - U.S. Steel Homestead Works, Auxiliary Buildings & Shops, Along Monongahela River, Homestead, Allegheny County, PA

Internet Shopping Behavior of College of Education Students

ERIC Educational Resources Information Center

Kiyici, Mubin

2012-01-01

Internet is an important facilitator for human and humans use this medium almost every phase. As a shopping medium, internet attract human so attract researcher. Younger people can adapt newer technologies so they can adapt internet as shopping tool. In this research it is tried to define college of education students' online shopping behavior and…

View north of tube bending shop in boilermakers department located ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View north of tube bending shop in boilermakers department located in southeast corner of the structural shop building (building 57). The computer controlled tube bender can be programmed to bend boiler tubing to nearly any required configuration - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

78 FR 57650 - Announcement of Funding Awards for the Self-Help Homeownership Opportunity Program (SHOP) for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

... significant amount of sweat equity towards the development of the SHOP units. Sweat equity involves... SHOP funds together with the homebuyer's sweat equity and volunteer labor contributions significantly... sweat equity contribution must not be mortgaged or otherwise restricted upon future sale of the SHOP...

20 CFR 404.1030 - Delivery and distribution or sale of newspapers, shopping news, and magazines.

Code of Federal Regulations, 2012 CFR

2012-04-01

... newspapers, shopping news, and magazines. 404.1030 Section 404.1030 Employees' Benefits SOCIAL SECURITY... of newspapers, shopping news, and magazines. (a) If you are under age 18. Work you do before you reach age 18 delivering or distributing newspapers or shopping news is excluded from employment. This...

20 CFR 404.1030 - Delivery and distribution or sale of newspapers, shopping news, and magazines.

Code of Federal Regulations, 2014 CFR

2014-04-01

... newspapers, shopping news, and magazines. 404.1030 Section 404.1030 Employees' Benefits SOCIAL SECURITY... of newspapers, shopping news, and magazines. (a) If you are under age 18. Work you do before you reach age 18 delivering or distributing newspapers or shopping news is excluded from employment. This...

20 CFR 404.1030 - Delivery and distribution or sale of newspapers, shopping news, and magazines.

Code of Federal Regulations, 2011 CFR

2011-04-01

... newspapers, shopping news, and magazines. 404.1030 Section 404.1030 Employees' Benefits SOCIAL SECURITY... of newspapers, shopping news, and magazines. (a) If you are under age 18. Work you do before you reach age 18 delivering or distributing newspapers or shopping news is excluded from employment. This...

20 CFR 404.1030 - Delivery and distribution or sale of newspapers, shopping news, and magazines.

Code of Federal Regulations, 2010 CFR

2010-04-01

... newspapers, shopping news, and magazines. 404.1030 Section 404.1030 Employees' Benefits SOCIAL SECURITY... of newspapers, shopping news, and magazines. (a) If you are under age 18. Work you do before you reach age 18 delivering or distributing newspapers or shopping news is excluded from employment. This...

20 CFR 404.1030 - Delivery and distribution or sale of newspapers, shopping news, and magazines.

Code of Federal Regulations, 2013 CFR

2013-04-01

... newspapers, shopping news, and magazines. 404.1030 Section 404.1030 Employees' Benefits SOCIAL SECURITY... of newspapers, shopping news, and magazines. (a) If you are under age 18. Work you do before you reach age 18 delivering or distributing newspapers or shopping news is excluded from employment. This...

DEVELOPING PROPER ATTITUDES TOWARD EYE PROTECTION IN THE SCHOOL SHOP, A RESEARCH REPORT.

ERIC Educational Resources Information Center

SCHAEFER, CARL J.; AND OTHERS

TWO METHODS OF IMPLEMENTING SCHOOL SHOP EYE PROTECTION PROGRAMS WERE INVESTIGATED TO DETERMINE THE MORE EFFECTIVE FOR DEVELOPING FAVORABLE AND LASTING STUDENT ATTITUDES. TWO INDEPENDENT SAMPLES, TOTALING 76, WERE DRAWN FROM THE TENTH GRADE VOCATIONAL MACHINE SHOP STUDENTS AND FROM COLLEGE STUDENTS ENROLLED IN AN ENGINEERING MACHINE SHOP COURSE.…

1. THREEQUARTER VIEW OF MECHANICAL SHOP, SHOWING EAST AND NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. THREE-QUARTER VIEW OF MECHANICAL SHOP, SHOWING EAST AND NORTH SIDES; LOOKING SOUTHWEST; POWER PLANT IN BACKGROUND AT RIGHT; SAWTOOTH MONITORS ON BEEF KILL (BUILDING 149) VISIBLE ABOVE SHOP BUILDING AT CENTER OF PHOTO - Rath Packing Company, Mechanical Shop, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

Standardized Curriculum for Machine Tool Operation/Machine Shop.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized vocational education course titles and core contents for two courses in Mississippi are provided: machine tool operation/machine shop I and II. The first course contains the following units: (1) orientation; (2) shop safety; (3) shop math; (4) measuring tools and instruments; (5) hand and bench tools; (6) blueprint reading; (7)…

Census tract correlates of vape shop locations in New Jersey.

PubMed

Giovenco, Daniel P; Duncan, Dustin T; Coups, Elliot J; Lewis, M Jane; Delnevo, Cristine D

2016-07-01

Vape shops are opening across the USA, but little is known about the types of neighborhoods where they are located. This study explores community-level predictors of vape shop locations in New Jersey, USA. Vape shops were identified in July 2015 using a validated systematic online search protocol and geocoded using Google Earth Pro. Multivariable logistic regression identified demographic and other predictors of vape shop presence at the census tract level. Tobacco outlet density was consistently associated with higher odds of vape shop presence after adjusting for covariates (p<0.05). However, factors traditionally associated with tobacco retail were negatively associated with vapor outlets. Census tracts with a higher proportion of non-Hispanic black residents had significantly lower odds of having a vape shop (β=-0.03, p<0.001). Vape shops are commonly located in census tracts where tobacco retail is high, but where fewer racial minorities live. The retail environment may communicate social norms regarding vaping and ultimately influence use behaviors of community residents. Copyright © 2016 Elsevier Ltd. All rights reserved.

US Household Food Shopping Patterns: Dynamic Shifts Since 2000 And Socioeconomic Predictors.

PubMed

Stern, Dalia; Robinson, Whitney R; Ng, Shu Wen; Gordon-Larsen, Penny; Popkin, Barry M

2015-11-01

Under the assumption that differential food access might underlie nutritional disparities, programs and policies have focused on the need to build supermarkets in underserved areas, in an effort to improve dietary quality. However, there is limited evidence about which types of stores are used by households of different income levels and differing races/ethnicities. We used cross-sectional cluster analysis to derive shopping patterns from US households' volume food purchases by store from 2000 to 2012. Multinomial logistic regression identified household socioeconomic characteristics that were associated with shopping patterns in 2012. We found three food shopping patterns or clusters: households that primarily shopped at grocery stores, households that primarily shopped at mass merchandisers, and a combination cluster in which households split their purchases among multiple store types. In 2012 we found no income or race/ethnicity differences for the cluster of households that primarily shopped at grocery stores. However, low-income non-Hispanic blacks (versus non-Hispanic whites) had a significantly lower probability of belonging to the mass merchandise cluster. These varied shopping patterns must be considered in future policy initiatives. Furthermore, it is important to continue studying the complex rationales for people's food shopping patterns. Project HOPE—The People-to-People Health Foundation, Inc.

Who walks into vape shops in Southern California?: a naturalistic observation of customers.

PubMed

Sussman, Steve; Allem, Jon-Patrick; Garcia, Jocelyn; Unger, Jennifer B; Cruz, Tess Boley; Garcia, Robert; Baezconde-Garbanati, Lourdes

2016-01-01

The rising popularity of electronic cigarettes (e-cigarettes) has been accompanied by the proliferation of vape shops in the United States. Vape shops are devoted to the sale of e-cigarettes and e-juices. This study aimed to describe the age, gender, and ethnicity of customers who frequent these shops, determine whether conversations transpire between retailers and customers, as well as identify the types of activities taking place while customers are inside the store. A naturalistic observation study of 186 customers in 59 vape shops in Southern California was completed in locations that were relatively high in Korean, Non-Hispanic white, Hispanic, or African American ethnicity. Across all shops, the average estimated age of customers was 30.29 years old (SD = 9.70), 53 % were estimated to be non-Hispanic white, and 79 % were males; few minors entered the shops. Conversations about vaping related topics were prevalent (e.g., sampling e-juices, receiving help on hardware, and talking about vaping). Purchases were commonly observed as well as customers lounging in the shop. Vape shops provide consumers a place to purchase and discuss e-cigarettes and offer an environment that serves as a place of recreation with customers lounging once inside. Findings should inform local tobacco control efforts and regulatory policies in the future.

Canoe: An Autonomous Infrastructure-Free Indoor Navigation System.

PubMed

Dong, Kai; Wu, Wenjia; Ye, Haibo; Yang, Ming; Ling, Zhen; Yu, Wei

2017-04-30

The development of the Internet of Things (IoT) has accelerated research in indoor navigation systems, a majority of which rely on adequate wireless signals and sources. Nonetheless, deploying such a system requires periodic site-survey, which is time consuming and labor intensive. To address this issue, in this paper we present Canoe , an indoor navigation system that considers shopping mall scenarios. In our system, we do not assume any prior knowledge, such as floor-plan or the shop locations, access point placement or power settings, historical RSS measurements or fingerprints, etc. Instead, Canoe requires only that the shop owners collect and publish RSS values at the entrances of their shops and can direct a consumer to any of these shops by comparing the observed RSS values. The locations of the consumers and the shops are estimated using maximum likelihood estimation. In doing this, the direction of the target shop relative to the current orientation of the consumer can be precisely computed, such that the direction that a consumer should move can be determined. We have conducted extensive simulations using a real-world dataset. Our experiments in a real shopping mall demonstrate that if 50% of the shops publish their RSS values, Canoe can precisely navigate a consumer within 30 s, with an error rate below 9%.

Canoe: An Autonomous Infrastructure-Free Indoor Navigation System

PubMed Central

Dong, Kai; Wu, Wenjia; Ye, Haibo; Yang, Ming; Ling, Zhen; Yu, Wei

2017-01-01

The development of the Internet of Things (IoT) has accelerated research in indoor navigation systems, a majority of which rely on adequate wireless signals and sources. Nonetheless, deploying such a system requires periodic site-survey, which is time consuming and labor intensive. To address this issue, in this paper we present Canoe, an indoor navigation system that considers shopping mall scenarios. In our system, we do not assume any prior knowledge, such as floor-plan or the shop locations, access point placement or power settings, historical RSS measurements or fingerprints, etc. Instead, Canoe requires only that the shop owners collect and publish RSS values at the entrances of their shops and can direct a consumer to any of these shops by comparing the observed RSS values. The locations of the consumers and the shops are estimated using maximum likelihood estimation. In doing this, the direction of the target shop relative to the current orientation of the consumer can be precisely computed, such that the direction that a consumer should move can be determined. We have conducted extensive simulations using a real-world dataset. Our experiments in a real shopping mall demonstrate that if 50% of the shops publish their RSS values, Canoe can precisely navigate a consumer within 30 s, with an error rate below 9%. PMID:28468291

Injectable contraceptive sales at licensed chemical seller shops in ghana: access and reported use in rural and periurban communities.

PubMed

Lebetkin, Elena; Orr, Tracy; Dzasi, Kafui; Keyes, Emily; Shelus, Victoria; Mensah, Stephen; Nagai, Henry; Stanback, John

2014-03-01

Most women in Ghana obtain oral contraceptives and condoms from shops run by licensed chemical sellers, but such shops are not legally permitted to sell the country's most widely used method, the injectable. Allowing shops to sell the injectable could increase access to and use of the method. In 2012-2013, semistructured telephone interviews were conducted among convenience samples of 94 licensed chemical seller shop operators in two districts who were trained to sell the injectable and of 298 women who purchased the method from these shops. Follow-up interviews were conducted with 92 clients approximately three months after their initial injectable purchase. Ninety-seven percent of shop operators reported selling the injectable, and 94% felt sufficiently trained to provide family planning methods and services. Virtually all sellers (99%) referred clients to a hospital or health facility for injection; none provided injections themselves. Fifty-six percent of injectable clients were new family planning users. Of those who completed a follow-up interview, 79% had purchased the injectable again from a shop. Virtually all clients (97%) reported getting their injection at the health facility to which they were referred by the seller. Women cited trust, convenience and commodities being in stock as key reasons for purchasing from a shop. Licensed chemical seller shop operators can safely sell the injectable and refer clients to health facilities for screening, counseling and injection.

Comparison of opioid doctor shopping for tapentadol and oxycodone: a cohort study.

PubMed

Cepeda, M Soledad; Fife, Daniel; Vo, Lien; Mastrogiovanni, Gregory; Yuan, Yingli

2013-02-01

Obtaining opioids from multiple prescribers, known as doctor shopping, is 1 example of opioid abuse and diversion. The dual mechanism of action of tapentadol could make tapentadol less likely to be abused than other opioids. The aim of this retrospective cohort study was to compare the risk of shopping behavior between tapentadol immediate release (IR) and oxycodone IR. Subjects exposed to tapentadol or oxycodone with no recent opioid use were included and followed for 1 year. The primary outcome was the proportion of subjects who developed shopping behavior defined as subjects who had opioid prescriptions written by >1 prescriber with ≥1 day of overlap filled at ≥3 pharmacies. The opioids involved in the shopping episodes were assessed. A total of 112,821 subjects were exposed to oxycodone and 42,940 to tapentadol. Shopping behavior was seen in .8% of the subjects in the oxycodone group and in .2% of the subjects in the tapentadol group, for an adjusted odds ratio of 3.5 (95% confidence interval, 2.8 to 4.4). In the oxycodone group, 28.0% of the shopping events involved exclusively oxycodone, whereas in the tapentadol group, .6% of the shopping events involved exclusively tapentadol. Results suggest that the risk of shopping behavior is substantially lower with tapentadol than with oxycodone. The risk of opioid doctor shopping, ie, obtaining opioid prescriptions from multiple prescribers, is lower with tapentadol than with oxycodone. Copyright © 2013 American Pain Society. Published by Elsevier Inc. All rights reserved.

Consultation behaviour of doctor-shopping patients and factors that reduce shopping.

PubMed

Ohira, Yoshiyuki; Ikusaka, Masatomi; Noda, Kazutaka; Tsukamoto, Tomoko; Takada, Toshihiko; Miyahara, Masahito; Funakoshi, Hiraku; Basugi, Ayako; Keira, Katsunori; Uehara, Takanori

2012-04-01

To investigate the subsequent behaviour of doctor-shopping patients (defined as those attending multiple hospitals for the same complaint) who consulted our department and factors related to cessation of doctor shopping. Patients who presented without referral to the Department of General Medicine at Chiba University Hospital in Japan (our department) completed a questionnaire at their first visit. A follow-up questionnaire was also sent to them in order to assess doctor shopping after 3 months. Then items in the questionnaires were investigated for significant differences between patients who continued or stopped doctor shopping. Logistic regression analysis was performed with items showing a significant difference between patients who stopped doctor shopping and those who continued it, in order to identify independent determinants of the cessation of shopping. A total of 978 patients who presented spontaneously to our department consented to this study, and 929 patients (95.0%) completed questionnaires correctly. Among them, 203 patients (21.9%) were identified as doctor shoppers. The follow-up survey was completed correctly by 138 patients (68.0%). Among them, 25 patients (18.1%) were found to have continued doctor shopping, which was a significantly lower rate than before (P < 0.001). Logistic regression analysis selected the following factors as independent determinants of the cessation of doctor shopping: 'confirmation of the diagnosis' (odds ratio: 8.12, 95% confidence interval: 1.46-45.26), and 'satisfaction with consultation' (odds ratio: 2.07, 95% confidence interval: 1.42-3.01). Doctor shopping decreased significantly after patients consulted our department, with 'confirmation of the diagnosis' and 'satisfaction with consultation' being identified as contributing factors. © 2010 Blackwell Publishing Ltd.

Shopping behavior for ADHD drugs: results of a cohort study in a pharmacy database.

PubMed

Cepeda, M Soledad; Fife, Daniel; Berwaerts, Joris; Yuan, Yingli; Mastrogiovanni, Greg

2014-09-01

Attention-deficit hyperactivity disorder (ADHD) medications are subject to abuse, misuse, and diversion. Obtaining ADHD prescriptions from multiple prescribers or filled across multiple pharmacies, known as 'doctor shopping', may reflect such unsanctioned use. We sought to create a definition of shopping behavior that differentiated ADHD medications from medications with low risk of diversion, i.e. asthma medications, and describe the incidence, frequency, and demography of shopping behavior. This was a retrospective cohort study in a pharmacy database-LRx-covering 65 % of US retail pharmacies. Subjects had ADHD or asthma medication dispensed between February 2011 and January 2012. We followed subjects for 18 months to assess the number with overlapping dispensings from different prescribers, and the number of prescribers and pharmacies involved in those dispensings. We included 4,402,464 subjects who were dispensed ADHD medications, and 6,128,025 subjects who were dispensed asthma medications. Overlapping prescriptions from two or more prescribers dispensed by three or more pharmacies was four times more frequent in the ADHD cohort than in the asthma cohort. Using this definition, ADHD medication shopping behavior was more common among experienced users than naïve users, and was most common in subjects aged 10-39 years. Among subjects who shopped, 57.4 % shopped only once (accounting for 22.4 % of episodes), and 9.2 % shopped six or more times (accounting for 42.0 % of episodes). Shoppers more often received stimulant ADHD drugs than non-stimulants. Overlapping prescriptions by different prescribers and filled at three or more pharmacies defines ADHD medication shopping. Shopping behavior is most common in adolescents and younger adults. A small proportion of shoppers is responsible for a large number of shopping episodes.

A possible dose-response association between distance to farmers' markets and roadside produce stands, frequency of shopping, fruit and vegetable consumption, and body mass index among customers in the Southern United States.

PubMed

Jilcott Pitts, Stephanie B; Hinkley, Jedediah; Wu, Qiang; McGuirt, Jared T; Lyonnais, Mary Jane; Rafferty, Ann P; Whitt, Olivia R; Winterbauer, Nancy; Phillips, Lisa

2017-01-11

The association between farmers' market characteristics and consumer shopping habits remains unclear. Our objective was to examine associations among distance to farmers' markets, amenities within farmers' markets, frequency of farmers' market shopping, fruit and vegetable consumption, and body mass index (BMI). We hypothesized that the relationship between frequency of farmers' market shopping and BMI would be mediated by fruit and vegetable consumption. In 15 farmers' markets in northeastern North Carolina, July-September 2015, we conducted a cross-sectional survey among 263 farmers' market customers (199 provided complete address data) and conducted farmers' market audits. To participate, customers had to be over 18 years of age, and English speaking. Dependent variables included farmers' market shopping frequency, fruit and vegetable consumption, and BMI. Analysis of variance, adjusted multinomial logistic regression, Poisson regression, and linear regression models, adjusted for age, race, sex, and education, were used to examine associations between distance to farmers' markets, amenities within farmers' markets, frequency of farmers' market shopping, fruit and vegetable consumption, and BMI. Those who reported shopping at farmers' markets a few times per year or less reported consuming 4.4 (standard deviation = 1.7) daily servings of fruits and vegetables, and those who reported shopping 2 or more times per week reported consuming 5.5 (2.2) daily servings. There was no association between farmers' market amenities, and shopping frequency or fruit and vegetable consumption. Those who shopped 2 or more times per week had a statistically significantly lower BMI than those who shopped less frequently. There was no evidence of mediation of the relationship between frequency of shopping and BMI by fruit and vegetable consumption. More work should be done to understand factors within farmers' markets that encourage fruit and vegetable purchases.

A Descriptive Longitudinal Study of Changes in Vape Shop Characteristics and Store Policies in Anticipation of the 2016 FDA Regulations of Tobacco Products, Including E-Cigarettes.

PubMed

Yu, Sheila; Escobedo, Patricia; Garcia, Robert; Cruz, Tess Boley; Unger, Jennifer B; Baezconde-Garbanati, Lourdes; Meza, Leah; Sussman, Steve

2018-02-11

After proposing the "Deeming Rule" in 2014, the U.S. Food and Drug Administration (FDA) began regulating the manufacturing, marketing, and sales of electronic cigarette (e-cigarette) products as tobacco products in 2016. The current study conducted vape shop store observations and surveyed Los Angeles-area shop employees (assessing their beliefs, awareness, and perceptions of e-cigarettes and related FDA regulations) at two time points one year apart to better understand what vape shop retailers would do given FDA's soon-to-be-enacted Deeming Rule. The study also compared retailer beliefs/awareness/actions and store characteristics immediately after the Deeming Rule proposal versus a year after the Rule had been proposed, right before its enactment. Two data collection waves occurred before the Deeming Rule enactment, with Year 1 surveying 77 shops (2014) and Year 2 surveying 61 shops (2015-2016). Between the data collection points, 16 shops had closed. Among the shops that were open at both time points, the majority (95% in Year 1; 74% in Year 2) were aware of some FDA regulations or other policies applying to vape shops. However, overall awareness of FDA regulations and state/local policies governing e-cigarettes significantly decreased from Year 1 to Year 2. At both time points, all shops offered customers free puffs of nicotine-containing e-liquids (prohibited by the then upcoming Deeming Rule). Perceptions of e-cigarette safety also significantly decreased between the years. Exploring vape shop retailer perceptions and store policies (i.e., free puffs/samples displays, perceptions of e-cigarette safety, etc.) over time will help the FDA assess the needs of the vape shop community and develop more effective retailer education campaigns and materials targeted to increase compliance with the newly enacted regulations.

A Descriptive Longitudinal Study of Changes in Vape Shop Characteristics and Store Policies in Anticipation of the 2016 FDA Regulations of Tobacco Products, Including E-Cigarettes

PubMed Central

Escobedo, Patricia; Baezconde-Garbanati, Lourdes; Meza, Leah; Sussman, Steve

2018-01-01

After proposing the “Deeming Rule” in 2014, the U.S. Food and Drug Administration (FDA) began regulating the manufacturing, marketing, and sales of electronic cigarette (e-cigarette) products as tobacco products in 2016. The current study conducted vape shop store observations and surveyed Los Angeles–area shop employees (assessing their beliefs, awareness, and perceptions of e-cigarettes and related FDA regulations) at two time points one year apart to better understand what vape shop retailers would do given FDA’s soon-to-be-enacted Deeming Rule. The study also compared retailer beliefs/awareness/actions and store characteristics immediately after the Deeming Rule proposal versus a year after the Rule had been proposed, right before its enactment. Two data collection waves occurred before the Deeming Rule enactment, with Year 1 surveying 77 shops (2014) and Year 2 surveying 61 shops (2015–2016). Between the data collection points, 16 shops had closed. Among the shops that were open at both time points, the majority (95% in Year 1; 74% in Year 2) were aware of some FDA regulations or other policies applying to vape shops. However, overall awareness of FDA regulations and state/local policies governing e-cigarettes significantly decreased from Year 1 to Year 2. At both time points, all shops offered customers free puffs of nicotine-containing e-liquids (prohibited by the then upcoming Deeming Rule). Perceptions of e-cigarette safety also significantly decreased between the years. Exploring vape shop retailer perceptions and store policies (i.e., free puffs/samples displays, perceptions of e-cigarette safety, etc.) over time will help the FDA assess the needs of the vape shop community and develop more effective retailer education campaigns and materials targeted to increase compliance with the newly enacted regulations. PMID:29439464

Food Shopping and Acquisition Behaviors in Relation to BMI among Residents of Low-Income Communities in South Carolina.

PubMed

Liese, Angela D; Ma, Xiaonan; Hutto, Brent; Sharpe, Patricia A; Bell, Bethany A; Wilcox, Sara

2017-09-16

Low-income areas in which residents have poor access to healthy foods have been referred to as "food deserts." It is thought that improving food access may help curb the obesity epidemic. Little is known about where residents of food deserts shop and if shopping habits are associated with body mass index (BMI). We evaluated the association of food shopping and acquisition (e.g., obtaining food from church, food pantries, etc.) with BMI among 459 residents of low-income communities from two South Carolina counties, 81% of whom lived in United States Department of Agriculture-designated food deserts. Participants were interviewed about food shopping and acquisition and perceptions of their food environment, and weight and height were measured. Distances to food retail outlets were determined. Multivariable linear regression analysis was employed. Our study sample comprising largely African-American women had an average BMI of 32.5 kg/m². The vast majority of study participants shopped at supermarkets (61%) or supercenters/warehouse clubs (27%). Shopping at a supercenter or warehouse club as one's primary store was significantly associated with a 2.6 kg/m² higher BMI compared to shopping at a supermarket, independent of demographics, socioeconomics, physical activity, and all other food shopping/acquisition behaviors. Persons who reported shopping at a small grocery store or a convenience or dollar store as their tertiary store had a 2.6 kg/m² lower BMI. Respondents who perceived lack of access to adequate food shopping in their neighborhoods as a problem had higher BMI. Living in a food desert census tract was not significantly associated with BMI. Other shopping attributes, including distance to utilized and nearest grocery stores, were not independently associated with BMI. These findings call into question the idea that poor spatial access to grocery stores is a key underlying factor affecting the obesity epidemic. Future research should consider assessing foods purchased and dietary intake within a comprehensive study of food shopping behaviors and health outcomes among persons living in food deserts.