Science.gov

Sample records for optimal drug delivery

  1. Optimizing drugs for local delivery.

    PubMed

    Collingwood, S; Lock, R; Searcey, M

    2009-12-01

    An international panel of speakers together with approximately 70 delegates were brought together by The Society for Medicines Research's symposium on Optimising Drugs for Local Delivery, held on June 11, 2009 at the Novartis Institutes for Biomedical Research, Horsham, UK. The focus of the conference was on the delivery of drugs direct to the site of action and the consequences of this delivery route on delivery technologies, formulation science and molecular design.

  2. Optimization of Drug Delivery by Drug-Eluting Stents

    PubMed Central

    Bozsak, Franz; Gonzalez-Rodriguez, David; Sternberger, Zachary; Belitz, Paul; Bewley, Thomas; Chomaz, Jean-Marc; Barakat, Abdul I.

    2015-01-01

    Drug-eluting stents (DES), which release anti-proliferative drugs into the arterial wall in a controlled manner, have drastically reduced the rate of in-stent restenosis and revolutionized the treatment of atherosclerosis. However, late stent thrombosis remains a safety concern in DES, mainly due to delayed healing of the endothelial wound inflicted during DES implantation. We present a framework to optimize DES design such that restenosis is inhibited without affecting the endothelial healing process. To this end, we have developed a computational model of fluid flow and drug transport in stented arteries and have used this model to establish a metric for quantifying DES performance. The model takes into account the multi-layered structure of the arterial wall and incorporates a reversible binding model to describe drug interaction with the cells of the arterial wall. The model is coupled to a novel optimization algorithm that allows identification of optimal DES designs. We show that optimizing the period of drug release from DES and the initial drug concentration within the coating has a drastic effect on DES performance. Paclitaxel-eluting stents perform optimally by releasing their drug either very rapidly (within a few hours) or very slowly (over periods of several months up to one year) at concentrations considerably lower than current DES. In contrast, sirolimus-eluting stents perform optimally only when drug release is slow. The results offer explanations for recent trends in the development of DES and demonstrate the potential for large improvements in DES design relative to the current state of commercial devices. PMID:26083626

  3. Design, Characterization, and Optimization of Controlled Drug Delivery System Containing Antibiotic Drug/s

    PubMed Central

    Shelate, Pragna; Dave, Divyang

    2016-01-01

    The objective of this work was design, characterization, and optimization of controlled drug delivery system containing antibiotic drug/s. Osmotic drug delivery system was chosen as controlled drug delivery system. The porous osmotic pump tablets were designed using Plackett-Burman and Box-Behnken factorial design to find out the best formulation. For screening of three categories of polymers, six independent variables were chosen for Plackett-Burman design. Osmotic agent sodium chloride and microcrystalline cellulose, pore forming agent sodium lauryl sulphate and sucrose, and coating agent ethyl cellulose and cellulose acetate were chosen as independent variables. Optimization of osmotic tablets was done by Box-Behnken design by selecting three independent variables. Osmotic agent sodium chloride, pore forming agent sodium lauryl sulphate, and coating agent cellulose acetate were chosen as independent variables. The result of Plackett-Burman and Box-Behnken design and ANOVA studies revealed that osmotic agent and pore former had significant effect on the drug release up to 12 hr. The observed independent variables were found to be very close to predicted values of most satisfactory formulation which demonstrates the feasibility of the optimization procedure in successful development of porous osmotic pump tablets containing antibiotic drug/s by using sodium chloride, sodium lauryl sulphate, and cellulose acetate as key excipients. PMID:27610247

  4. Experimental design for optimizing drug release from silicone elastomer matrix and investigation of transdermal drug delivery.

    PubMed

    Snorradóttir, Bergthóra S; Gudnason, Pálmar I; Thorsteinsson, Freygardur; Másson, Már

    2011-04-18

    Silicone elastomers are commonly used for medical devices and external prosthesis. Recently, there has been growing interest in silicone-based medical devices with enhanced function that release drugs from the elastomer matrix. In the current study, an experimental design approach was used to optimize the release properties of the model drug diclofenac from medical silicone elastomer matrix, including a combination of four permeation enhancers as additives and allowing for constraints in the properties of the material. The D-optimal design included six factors and five responses describing material properties and release of the drug. The first experimental object was screening, to investigate the main and interaction effects, based on 29 experiments. All excipients had a significant effect and were therefore included in the optimization, which also allowed the possible contribution of quadratic terms to the model and was based on 38 experiments. Screening and optimization of release and material properties resulted in the production of two optimized silicone membranes, which were tested for transdermal delivery. The results confirmed the validity of the model for the optimized membranes that were used for further testing for transdermal drug delivery through heat-separated human skin. The optimization resulted in an excipient/drug/silicone composition that resulted in a cured elastomer with good tensile strength and a 4- to 7-fold transdermal delivery increase relative to elastomer that did not contain excipients.

  5. P-glycoprotein Inhibition for Optimal Drug Delivery

    PubMed Central

    Amin, Md. Lutful

    2013-01-01

    P-glycoprotein (P-gp), an efflux membrane transporter, is widely distributed throughout the body and is responsible for limiting cellular uptake and the distribution of xenobiotics and toxic substances. Hundreds of structurally diverse therapeutic agents are substrates to it and it impedes the absorption, permeability, and retention of the drugs, extruding them out of the cells. It is overexpressed in cancer cells and accountable for obstructing cell internalization of chemotherapeutic agents and for developing transporter mediated resistance by cancer cells during anti-tumor treatments. As it jeopardizes the success of drug delivery and cancer targeting, strategies are being developed to overcome P-gp mediated drug transport. This concise review represents a brief discussion on P-gp mediated drug transport and how it hinders the success of various therapies. Its main focus is on various strategies used to tackle this curb in the field of drug delivery and targeting. PMID:24023511

  6. P-glycoprotein Inhibition for Optimal Drug Delivery.

    PubMed

    Amin, Md Lutful

    2013-08-19

    P-glycoprotein (P-gp), an efflux membrane transporter, is widely distributed throughout the body and is responsible for limiting cellular uptake and the distribution of xenobiotics and toxic substances. Hundreds of structurally diverse therapeutic agents are substrates to it and it impedes the absorption, permeability, and retention of the drugs, extruding them out of the cells. It is overexpressed in cancer cells and accountable for obstructing cell internalization of chemotherapeutic agents and for developing transporter mediated resistance by cancer cells during anti-tumor treatments. As it jeopardizes the success of drug delivery and cancer targeting, strategies are being developed to overcome P-gp mediated drug transport. This concise review represents a brief discussion on P-gp mediated drug transport and how it hinders the success of various therapies. Its main focus is on various strategies used to tackle this curb in the field of drug delivery and targeting.

  7. Targeting blood–brain barrier changes during inflammatory pain: an opportunity for optimizing CNS drug delivery

    PubMed Central

    Ronaldson, Patrick T; Davis, Thomas P

    2012-01-01

    The blood–brain barrier (BBB) is the most significant obstacle to effective CNS drug delivery. It possesses structural and biochemical features (i.e., tight-junction protein complexes and, influx and efflux transporters) that restrict xenobiotic permeation. Pathophysiological stressors (i.e., peripheral inflammatory pain) can alter BBB tight junctions and transporters, which leads to drug-permeation changes. This is especially critical for opioids, which require precise CNS concentrations to be safe and effective analgesics. Recent studies have identified molecular targets (i.e., endogenous transporters and intracellular signaling systems) that can be exploited for optimization of CNS drug delivery. This article summarizes current knowledge in this area and emphasizes those targets that present the greatest opportunity for controlling drug permeation and/or drug transport across the BBB in an effort to achieve optimal CNS opioid delivery. PMID:22468221

  8. Design optimization of a novel pMDI actuator for systemic drug delivery.

    PubMed

    Kakade, Prashant P; Versteeg, Henk K; Hargrave, Graham K; Genova, Perry; Williams Iii, Robert C; Deaton, Daniel

    2007-01-01

    Pressurized metered dose inhalers (pMDIs) are the most widely prescribed and economical respiratory drug delivery systems. Conventional pMDI actuators-those based on "two-orifice-and-sump" designs-produce an aerosol with a reasonable respirable fraction, but with high aerosol velocity. The latter is responsible for high oropharyngeal deposition, and consequently low drug delivery efficiency. Kos' pMDI technology is based on a proprietary vortex nozzle actuator (VNA), an innovative actuator configuration that seeks to reduce aerosol plume velocity, thereby promoting deep lung deposition. Using VNA development as a case study, this paper presents a systematic design optimization process to improve the actuator performance through use of advanced optical characterization tools. The optimization effort mainly relied on laser-based optical diagnostics to provide an improved understanding of the fundamentals of aerosol formation and interplay of various geometrical factors. The performance of the optimized VNA design thus evolved was characterized using phase Doppler anemometry and cascade impaction. The aerosol velocities for both standard and optimized VNA designs were found to be comparable, with both notably less than conventional actuators. The optimized VNA design also significantly reduces drug deposition in the actuator as well as USP throat adapter, which in turn, leads to a significantly higher fine particle fraction than the standard design (78 +/- 3% vs. 63 +/- 2% on an ex valve basis). This improved drug delivery efficiency makes VNA technology a practical proposition as a systemic drug delivery platform. Thus, this paper demonstrates how advanced optical diagnostic and characterization tools can be used in the development of high efficiency aerosol drug delivery devices.

  9. Formulation, Evaluation and Optimization of Pectin- Bora Rice Beads for Colon Targeted Drug Delivery System

    PubMed Central

    Ramteke, Kuldeep Hemraj; Nath, Lilakant

    2014-01-01

    Purpose: The purpose of this research was to established new polysaccharide for the colon targeted drug delivery system, its formulation and in vitro and in vivo evaluation. Methods: Microspheres containing pectin and bora rice were prepared by ionotropic gelation technique using zinc acetate as cross linking agent and model drug used was glipizide. A 32 full factorial design was employed to study the effect of independent variables, polymer to drug ratio (A), and concentration of cross linking agent (B) on dependent variables, particle size, swelling index, drug entrapment efficiency and percentage drug release. Results: Results of trial batches indicated that polymer to drug ratio and concentration of cross linking agent affects characteristics of beads. Beads were discrete, spherical and free flowing. Beads exhibited small particle size and showed higher percentage of drug entrapment efficiency. The optimized batch P2 exhibited satisfactory drug entrapment efficiency 68% and drug release was also controlled for more than 24 hours. The polymer to drug ratio had a more significant effect on the dependent variables. In vivo gamma scintigraphy study of optimized pectin-bora rice beads demonstrated degradation of beads whenever they reached to the colon. Conclusion: Bora rice is potential polysaccharide for colon targeted drug delivery system. PMID:24511481

  10. Contact-facilitated drug delivery with Sn2 lipase labile prodrugs optimize targeted lipid nanoparticle drug delivery

    PubMed Central

    Pan, Dipanjan; Pham, Christine TN; Weilbaecher, Katherine N; Tomasson, Michael H; Wickline, Samuel A; Lanza, Gregory M

    2016-01-01

    Sn2 lipase labile phospholipid prodrugs in conjunction with contact-facilitated drug delivery offer an important advancement in Nanomedicine. Many drugs incorporated into nanosystems, targeted or not, are substantially lost during circulation to the target. However, favorably altering the pharmacokinetics and volume of distribution of systemic drug delivery can offer greater efficacy with lower toxicity, leading to new prolonged-release nanoexcipients. However, the concept of achieving Paul Erhlich's inspired vision of a ‘magic bullet’ to treat disease has been largely unrealized due to unstable nanomedicines, nanosystems achieving low drug delivery to target cells, poor intracellular bioavailability of endocytosed nanoparticle payloads, and the substantial biological barriers of extravascular particle penetration into pathological sites. As shown here, Sn2 phospholipid prodrugs in conjunction with contact-facilitated drug delivery prevent premature drug diffusional loss during circulation and increase target cell bioavailability. The Sn2 phospholipid prodrug approach applies equally well for vascular constrained lipid-encapsulated particles and micelles the size of proteins that penetrate through naturally fenestrated endothelium in the bone marrow or thin-walled venules of an inflamed microcirculation. At one time Nanomedicine was considered a ‘Grail Quest’ by its loyal opposition and even many in the field adsorbing the pains of a long-learning curve about human biology and particles. However, Nanomedicine with innovations like Sn2 phospholipid prodrugs has finally made ‘made the turn’ toward meaningful translational success. PMID:26296541

  11. Optimization of Naltrexone Diclofenac Codrugs for Sustained Drug Delivery Across Microneedle-Treated Skin

    PubMed Central

    Ghosh, Priyanka; Lee, DoMin; Kim, Kyung Bo; Stinchcomb, Audra L.

    2013-01-01

    Purpose The purpose of this work was to optimize the structure of codrugs for extended delivery across microneedle treated skin. Naltrexone, the model compound was linked with diclofenac, a nonspecific cyclooxygenase inhibitor to enhance the pore lifetime following microneedle treatment and develop a 7 day transdermal system for naltrexone. Methods Four different codrugs of naltrexone and diclofenac were compared in terms of stability and solubility. Transdermal flux, permeability and skin concentration of both parent drugs and codrugs were quantified to form a structure permeability relationship. Results The results indicated that all codrugs bioconverted in the skin. The degree of conversion was dependent on the structure, phenol linked codrugs were less stable compared to the secondary alcohol linked structures. The flux of naltrexone across microneedle treated skin and the skin concentration of diclofenac were higher for the phenol linked codrugs. The polyethylene glycol link enhanced solubility of the codrugs, which translated into flux enhancement. Conclusion The current studies indicated that formulation stability of codrugs and the flux of naltrexone can be enhanced via structure design optimization. The polyethylene glycol linked naltrexone diclofenac codrug is better suited for a 7 day drug delivery system both in terms of stability and drug delivery. PMID:23943543

  12. Optimizing drug delivery systems using systematic "design of experiments." Part I: fundamental aspects.

    PubMed

    Singh, Bhupinder; Kumar, Rajiv; Ahuja, Naveen

    2005-01-01

    Design of an impeccable drug delivery product normally encompasses multiple objectives. For decades, this task has been attempted through trial and error, supplemented with the previous experience, knowledge, and wisdom of the formulator. Optimization of a pharmaceutical formulation or process using this traditional approach involves changing one variable at a time. Using this methodology, the solution of a specific problematic formulation characteristic can certainly be achieved, but attainment of the true optimal composition is never guaranteed. And for improvement in one characteristic, one has to trade off for degeneration in another. This customary approach of developing a drug product or process has been proved to be not only uneconomical in terms of time, money, and effort, but also unfavorable to fix errors, unpredictable, and at times even unsuccessful. On the other hand, the modern formulation optimization approaches, employing systematic Design of Experiments (DoE), are extensively practiced in the development of diverse kinds of drug delivery devices to improve such irregularities. Such systematic approaches are far more advantageous, because they require fewer experiments to achieve an optimum formulation, make problem tracing and rectification quite easier, reveal drug/polymer interactions, simulate the product performance, and comprehend the process to assist in better formulation development and subsequent scale-up. Optimization techniques using DoE represent effective and cost-effective analytical tools to yield the "best solution" to a particular "problem." Through quantification of drug delivery systems, these approaches provide a depth of understanding as well as an ability to explore and defend ranges for formulation factors, where experimentation is completed before optimization is attempted. The key elements of a DoE optimization methodology encompass planning the study objectives, screening of influential variables, experimental designs

  13. Optimization Studies on Compression Coated Floating-Pulsatile Drug Delivery of Bisoprolol

    PubMed Central

    Jagdale, Swati C.; Bari, Nilesh A.; Kuchekar, Bhanudas S.; Chabukswar, Aniruddha R.

    2013-01-01

    The purpose of the present work was to design and optimize compression coated floating pulsatile drug delivery systems of bisoprolol. Floating pulsatile concept was applied to increase the gastric residence of the dosage form having lag phase followed by a burst release. The prepared system consisted of two parts: a core tablet containing the active ingredient and an erodible outer shell with gas generating agent. The rapid release core tablet (RRCT) was prepared by using superdisintegrants with active ingredient. Press coating of optimized RRCT was done by polymer. A 32 full factorial design was used for optimization. The amount of Polyox WSR205 and Polyox WSR N12K was selected as independent variables. Lag period, drug release, and swelling index were selected as dependent variables. Floating pulsatile release formulation (FPRT) F13 at level 0 (55 mg) for Polyox WSR205 and level +1 (65 mg) for Polyox WSR N12K showed lag time of 4 h with >90% drug release. The data were statistically analyzed using ANOVA, and P < 0.05 was statistically significant. Release kinetics of the optimized formulation best fitted the zero order model. In vivo study confirms burst effect at 4 h in indicating the optimization of the dosage form. PMID:24367788

  14. Apoferritin nanocage as streptomycin drug reservoir: Technological optimization of a new drug delivery system.

    PubMed

    Ruozi, B; Veratti, P; Vandelli, M A; Tombesi, A; Tonelli, M; Forni, F; Pederzoli, F; Belletti, D; Tosi, G

    2017-02-25

    The aim of this study is to formulate and characterize streptomycin-loaded apoferritin nanoparticles (ApoStrep NPs) for their potential therapeutic use in bacterial resistant infections (i.e. tuberculosis). ApoStrep NPs were prepared by disassembly/reassembly process via pH method and changing apoferritin/drug molar ratio, purified by dialyses process also associated with gel filtration chromatography and characterized in their chemico-physical and technological parameters as yield, size distribution, polidispersivity, morphology, internal structure, zeta potential and loading efficacy. The results showed that spherical reproducible NPs could be obtained by using apoferritin/drug molar ratio lower than 1:25 and purification based on the combination of dialysis and gel filtration chromatography. Photon correlation spectroscopy, Uv-visible detection and electron microscopy showed the maintenance of the native apoferritin chemico-physical properties and structure. When formulated with apoferritin/drug 1:10 and 1:25 molar ratio, ApoStrep NPs showed remarkable encapsulation efficacy (35% and 28%, respectively) along with kinetic profile of drug delivery, approximately 15% at 37 °C in 72h, as evidenced by "in vitro" release experiments.

  15. Response surface methodology for the optimization of ubiquinone self-nanoemulsified drug delivery system.

    PubMed

    Nazzal, Sami; Khan, Mansoor A

    2002-01-01

    The aim of the present study was to prepare and evaluate an optimized, self-nanoemulsified drug delivery system of ubiquinone. A 3-factor, 3-level Box-Behnken design was used for the optimization procedure with the amounts of Polyoxyl 35 castor oil (X1), medium-chain mono- and diglyceride (X2), and lemon oil (X3) as the independent variables. The response variable was the cumulative percentage of ubiquinone emulsified in 10 minutes. Different ubiquinone release rates were obtained. The amount released ranged from 11% to 102.3%. Turbidity profile revealed 3 regions that were used to describe the progress of emulsion formation: lag phase, pseudolinear phase, and plateau turbidity. An increase in the amount of surfactant decreased turbidity values and caused a delay in lag time. Addition of cosurfactant enhanced the release rates. Increasing the amount of the eutectic agent was necessary to overcome drug precipitation especially at higher loading of surfactants and cosurfactants. Mathematical equations and response surface plots were used to relate the dependent and independent variables. The regression equation generated for the cumulative percentage emulsified in 10 minutes was Y1 = 90.9 - 22.1X1 + 5.03X2 + 13.95X3 + 12.13X1X2 + 15.13X1X3 - 14.40X1(2) - 6.25X3(2). The optimization model predicted a 93.4% release with X1, X2, and X3 levels of 35, 35, and 30 respectively. The observed responses were in close agreement with the predicted values of the optimized formulation. This demonstrated the reliability of the optimization procedure in predicting the dissolution behavior of a self-emulsified drug delivery system.

  16. Design and optimization of self-nanoemulsifying drug delivery systems for improved bioavailability of cyclovirobuxine D

    PubMed Central

    Ke, Zhongcheng; Hou, Xuefeng; Jia, Xiao-bin

    2016-01-01

    Background The main purpose of this research was to design a self-nanoemulsifying drug delivery system (SNEDDS) for improving the bioavailability of cyclovirobuxine D as a poorly water-soluble drug. Materials and methods Solubility trials, emulsifying studies, and pseudo-ternary phase diagrams were used to screen the SNEDDS formulations. The optimized drug-loaded SNEDDS was prepared at a mass ratio of 3:24:38:38 for cyclovirobuxine D, oleic acid, Solutol SH15, and propylene glycol, respectively. The optimized formulation was characterized in terms of physicochemical and pharmacokinetic parameters compared with marketed cyclovirobuxine D tablets. Results The optimized cyclovirobuxine-D-loaded SNEDDS was spontaneously dispersed to form a nanoemulsion with a globule size of 64.80±3.58 nm, which exhibited significant improvement of drug solubility, rapid absorption rate, and enhanced area under the curve, together with increased permeation and decreased efflux. Fortunately, there was a nonsignificant cytotoxic effect toward Caco-2 cells. The relative bioavailability of SNEDDS was 200.22% in comparison with market tablets, in rabbits. Conclusion SNEDDS could be a potential candidate for an oral dosage form of cyclovirobuxine D with improved bioavailability. PMID:27418807

  17. Self-nanoemulsifying drug delivery system of persimmon leaf extract: Optimization and bioavailability studies.

    PubMed

    Li, Wanwen; Yi, Shaoling; Wang, Zhouhua; Chen, Si; Xin, Shuang; Xie, Jingwen; Zhao, Chunshun

    2011-11-25

    In current study, a self-nanoemulsifying drug delivery system (SNEDDS) of persimmon (Diospyros kaki) leaf extract (PLE) was developed and characterized to compare its in vitro dissolution and relative bioavailability with commercially available tablets (Naoxinqing tablets). Pseudo-ternary phase diagrams were constructed by phase diagram by micro plate dilution (PDMPD) method, of which the evaluation method was improved to use Multiskan Ascent for identifying turbidity. The formulation of PLE-loaded SNEDDS was optimized by an extreme vertices experimental design. The optimized nanoemulsion formulation, loading with 44.48 mg/g PLE total flavonoids, consisted of Cremophor EL, Transcutol P, Labrafil M 1944 CS (56:34:10, w/w), and it remained stable after storing at 40°C, 25°C, 4°C for at least 6 months. When diluted with water, the SNEDDS droplet size was 34.85 nm and the zeta potential was -6.18 mV. Compared with the commercial tablets, the AUC of both quercetin and kaempferol, which are representative active flavonoids of PLE, was increased by 1.5-fold and 1.6-fold respectively following oral administration of PLE-loaded SNEDDS in fasting beagle dogs. These results indicate that SNEDDS is a promising drug delivery system for increasing the oral bioavailability of PLE.

  18. Design and optimization of self-nanoemulsifying drug delivery systems (SNEDDS) for enhanced dissolution of gemfibrozil.

    PubMed

    Villar, Ana Maria Sierra; Naveros, Beatriz Clares; Campmany, Ana Cristina Calpena; Trenchs, Monserrat Aróztegui; Rocabert, Coloma Barbé; Bellowa, Lyda Halbaut

    2012-07-15

    Self-nanoemulsifying drug delivery systems of gemfibrozil were developed under Quality by Design approach for improvement of dissolution and oral absorption. Preliminary screening was performed to select proper components combination. Box-Behnken experimental design was employed as statistical tool to optimize the formulation variables, X(1) (Cremophor(®) EL), X(2) (Capmul(®) MCM-C8), and X(3) (lemon essential oil). Systems were assessed for visual characteristics (emulsification efficacy), turbidity, droplet size, polydispersity index and drug release. Different pH media were also assayed for optimization. Following optimization, the values of formulation components (X(1), X(2), and X(3)) were 32.43%, 29.73% and 21.62%, respectively (16.22% of gemfibrozil). Transmission electron microscopy demonstrated spherical droplet morphology. SNEEDS release study was compared to commercial tablets. Optimized SNEDDS formulation of gemfibrozil showed a significant increase in dissolution rate compared to conventional tablets. Both formulations followed Weibull mathematical model release with a significant difference in t(d) parameter in favor of the SNEDDS. Equally amodelistic parameters were calculated being the dissolution efficiency significantly higher for SNEDDS, confirming that the developed SNEDDS formulation was superior to commercial formulation with respect to in vitro dissolution profile. This paper provides an overview of the SNEDDS of the gemfibrozil as a promising alternative to improve oral absorption.

  19. Sonophoresis in transdermal drug deliverys.

    PubMed

    Park, Donghee; Park, Hyunjin; Seo, Jongbum; Lee, Seunghun

    2014-01-01

    Transdermal drug delivery (TDD) has several significant advantages compared to oral drug delivery, including elimination of pain and sustained drug release. However, the use of TDD is limited by low skin permeability due to the stratum corneum (SC), the outermost layer of the skin. Sonophoresis is a technique that temporarily increases skin permeability such that various medications can be delivered noninvasively. For the past several decades, various studies of sonophoresis in TDD have been performed focusing on parameter optimization, delivery mechanism, transport pathway, or delivery of several drug categories including hydrophilic and high molecular weight compounds. Based on these various studies, several possible mechanisms of sonophoresis have been suggested. For example, cavitation is believed to be the predominant mechanism responsible for drug delivery in sonophoresis. This review presents details of various studies on sonophoresis including the latest trends, delivery of various therapeutic drugs, sonophoresis pathways and mechanisms, and outlook of future studies.

  20. Molecular modelling and multisimplex optimization of tocotrienol-rich self emulsified drug delivery systems.

    PubMed

    Alayoubi, Alaadin; Satyanarayanajois, Seetharama D; Sylvester, Paul W; Nazzal, Sami

    2012-04-15

    The objective of this study was to optimize a novel tocotrienol (TRF)-rich self emulsified drug delivery system (SEDDS). In the first part, an unusual phenomenon was investigated. It was observed that by substituting Tween 80 with Cremophor EL in the SEDDS it was possible to emulsify>55% TRF (by weight of the formulation) into submicron (<200 nm) emulsion. With Tween, only 17.5% of the loaded TRF could be emulsified into crude emulsion. The superiority of Cremophor was attributed to the special arrangement of the surfactant at the oil/water interface, which was confirmed by modelling and docking studies. In the second part of this study, the composition of the secondary ingredients in the TRF-rich SEDDS were optimized by the modified Multisimplex approach. SEDDS were manufactured at pre-defined step-size and tested for their dissolution behavior. Testing was performed sequentially until the optimum composition that can emulsify 50% of the loaded TRF into a stable<150 nm submicron emulsion was obtained. Optimization end-point was identified when the "membership value" approached 1, which was confirmed by a second Multisimplex run. Overall, this study demonstrated the utility of docking studies and the Multisimplex approach in product development when little is known about the experimental "design space".

  1. Human Serum Albumin Nanoparticles for Use in Cancer Drug Delivery: Process Optimization and In Vitro Characterization

    PubMed Central

    Lomis, Nikita; Westfall, Susan; Farahdel, Leila; Malhotra, Meenakshi; Shum-Tim, Dominique; Prakash, Satya

    2016-01-01

    Human serum albumin nanoparticles (HSA-NPs) are widely-used drug delivery systems with applications in various diseases, like cancer. For intravenous administration of HSA-NPs, the particle size, surface charge, drug loading and in vitro release kinetics are important parameters for consideration. This study focuses on the development of stable HSA-NPs containing the anti-cancer drug paclitaxel (PTX) via the emulsion-solvent evaporation method using a high-pressure homogenizer. The key parameters for the preparation of PTX-HSA-NPs are: the starting concentrations of HSA, PTX and the organic solvent, including the homogenization pressure and its number cycles, were optimized. Results indicate a size of 143.4 ± 0.7 nm and 170.2 ± 1.4 nm with a surface charge of −5.6 ± 0.8 mV and −17.4 ± 0.5 mV for HSA-NPs and PTX-HSA-NPs (0.5 mg/mL of PTX), respectively. The yield of the PTX-HSA-NPs was ~93% with an encapsulation efficiency of ~82%. To investigate the safety and effectiveness of the PTX-HSA-NPs, an in vitro drug release and cytotoxicity assay was performed on human breast cancer cell line (MCF-7). The PTX-HSA-NPs showed dose-dependent toxicity on cells of 52%, 39.3% and 22.6% with increasing concentrations of PTX at 8, 20.2 and 31.4 μg/mL, respectively. In summary, all parameters involved in HSA-NPs’ preparation, its anticancer efficacy and scale-up are outlined in this research article. PMID:28335244

  2. Development, Optimization, and Evaluation of Carvedilol-Loaded Solid Lipid Nanoparticles for Intranasal Drug Delivery.

    PubMed

    Aboud, Heba M; El Komy, Mohammed H; Ali, Adel A; El Menshawe, Shahira F; Abd Elbary, Ahmed

    2016-12-01

    Carvedilol, a beta-adrenergic blocker, suffers from poor systemic availability (25%) due to first-pass metabolism. The aim of this work was to improve carvedilol bioavailability through developing carvedilol-loaded solid lipid nanoparticles (SLNs) for nasal administration. SLNs were prepared by emulsion/solvent evaporation method. A 2(3) factorial design was employed with lipid type (Compritol or Precirol), surfactant (1 or 2% w/v poloxamer 188), and co-surfactant (0.25 or 0.5% w/v lecithin) concentrations as independent variables, while entrapment efficiency (EE%), particle size, and amount of carvedilol permeated/unit area in 24 h (Q 24) were the dependent variables. Regression analysis was performed to identify the optimum formulation conditions. The in vivo behavior was evaluated in rabbits comparing the bioavailability of carvedilol after intravenous, nasal, and oral administration. The results revealed high drug EE% ranging from 68 to 87.62%. Carvedilol-loaded SLNs showed a spherical shape with an enriched core drug loading pattern having a particle size in the range of 66 to 352 nm. The developed SLNs exhibited significant high amounts of carvedilol permeated through the nasal mucosa as confirmed by confocal laser scanning microscopy. The in vivo pharmacokinetic study revealed that the absolute bioavailability of the optimized intranasal SLNs (50.63%) was significantly higher than oral carvedilol formulation (24.11%). Hence, we conclude that our developed SLNs represent a promising carrier for the nasal delivery of carvedilol.

  3. Riluzole 5 mg/mL oral suspension: for optimized drug delivery in amyotrophic lateral sclerosis

    PubMed Central

    Dyer, Ann Margaret; Smith, Alan

    2017-01-01

    The aim of the present work is to extensively evaluate the pharmaceutical attributes of currently available riluzole presentations. The article describes the limitations and risks associated with the administration of crushed tablets, including the potential for inaccurate dosing and reduced rate of absorption when riluzole is administered with high-fat foods, and the advantages that a recently approved innovative oral liquid form of riluzole confers on amyotrophic lateral sclerosis (ALS) patients. The article further evaluates the patented and innovative controlled flocculation technology used in the pseudoplastic suspension formulation to reduce the oral anesthesia seen with crushed tablets, resulting in optimized drug delivery for riluzole. Riluzole is the only drug licensed for treating ALS, which is the most common form of motor neurone disease and a highly devastating neurodegenerative condition. The licensed indication is to extend life or the time to mechanical ventilation. Until recently, riluzole was only available as an oral tablet dosage form in the UK; however, an innovative oral liquid form, Teglutik® 5 mg/mL oral suspension, is now available. An oral liquid formulation provides an important therapeutic option for patients with ALS, >80% of who may become unable to swallow solid oral dosage forms due to disease-related dysphagia. Prior to the launch of riluzole oral suspension, the only way for many patients to continue to take riluzole as their disease progressed was through crushed tablets. A novel suspension formulation enables more accurate dosing and consistent ongoing administration of riluzole. There are clear and important advantages such as enhanced patient compliance compared with crushed tablets administered with food or via an enteral feeding tube and the potential for an improved therapeutic outcome and enhanced quality of life for ALS patients. PMID:28053507

  4. Application of drug delivery technologies in lead candidate selection and optimization.

    PubMed

    Chaubal, Mahesh V

    2004-07-15

    Formulation development during early drug discovery and lead optimization, involves several challenges including limited drug supply, the need for rapid turnaround, and limited development time. It is also desirable to develop initial formulations that will be representative of final commercial formulations. Nanoparticles offer a unique platform for the formulation of poorly soluble drugs - such formulations can be injected (intravenous, subcutaneous, intramuscular), as well as administered through other routes, such as oral, ocular and inhalation. Thus, a single formulation can be used to test and eventually develop multiple dosage forms. Furthermore, nanoparticles offer the opportunity for high drug loading, for low potency compounds, and thus support toxicological evaluation of such compounds.

  5. Antimicrobial activity of novel chitosan/cloisite 10A nanocomposite: Preparation, optimization, characterization and drug delivery behavior.

    PubMed

    Rou, Jyotiranjan; Mohapatra, Ranjit; Sahoo, Sunit Kumar

    2016-07-01

    The objectives of the present research project were to formulate, evaluate and perform antimicrobial study and drug delivery behavior of nanocomposite material based on biopolymer chitosan and organically modified montmorillonite clay; i.e. cloisite 10A. In the present study, chitosan / cloisite 10A nanocomposite material was formulated by solution mixing and optimized. The nanocomposite material was characterized by FTIR, zeta sizer, XRD, and SEM. Polymer/clay nanocomposite material is evaluated for its antimicrobial activity against both gram- negative and gram- positive bacteria. It was also studied for potential drug carrier system using diclofenac sodium as a model drug. Drug incorporation efficiency and drug content were also determined. SEM provided the composite shape and its surface topography. XRD data revealed the nanocrystalline composition and crystallite size. The average diameters of particles in the nanocomposite were found to be around 80 nm from both XRD report, calculated by applying Scherrer equation and zeta sizer. The antimicrobial activity report revealed that nanocomposite exhibited stronger inhibition against the microorganisms as compared to that of pure chitosan. From the in vitro drug-release study, it is observed that biopolymer/clay nanocomposite exhibited extended release period of drug as compared to the pristine chitosan. This research work provides a platform for further research on the polymer/clay nanocomposites for biomedical and drug delivery applications.

  6. Dynamic dual-isotope molecular imaging elucidates principles for optimizing intrathecal drug delivery

    PubMed Central

    Wolf, Daniel A.; Hesterman, Jacob Y.; Sullivan, Jenna M.; Orcutt, Kelly D.; Silva, Matthew D.; Lobo, Merryl; Wellman, Tyler; Hoppin, Jack

    2016-01-01

    The intrathecal (IT) dosing route offers a seemingly obvious solution for delivering drugs directly to the central nervous system. However, gaps in understanding drug molecule behavior within the anatomically and kinetically unique environment of the mammalian IT space have impeded the establishment of pharmacokinetic principles for optimizing regional drug exposure along the neuraxis. Here, we have utilized high-resolution single-photon emission tomography with X-ray computed tomography to study the behavior of multiple molecular imaging tracers following an IT bolus injection, with supporting histology, autoradiography, block-face tomography, and MRI. Using simultaneous dual-isotope imaging, we demonstrate that the regional CNS tissue exposure of molecules with varying chemical properties is affected by IT space anatomy, cerebrospinal fluid (CSF) dynamics, CSF clearance routes, and the location and volume of the injected bolus. These imaging approaches can be used across species to optimize the safety and efficacy of IT drug therapy for neurological disorders. PMID:27699254

  7. P-glycoprotein trafficking as a therapeutic target to optimize CNS drug delivery

    PubMed Central

    Davis, Thomas P.; Sanchez-Covarubias, Lucy; Tome, Margaret E.

    2014-01-01

    The primary function of the blood-brain barrier (BBB) /neurovascular unit is to protect the CNS from potentially harmful xenobiotic substances and maintain CNS homeostasis. Restricted access to the CNS is maintained via a combination of tight junction proteins as well as a variety of efflux and influx transporters that limits the transcellular and paracellular movement of solutes. Of the transporters identified at the BBB, P-glycoprotein (P-gp) has emerged as the transporter that is the greatest obstacle to effective CNS drug delivery. In this chapter we provide data to support intracellular protein trafficking of P-gp within cerebral capillary microvessels as a potential target for improved drug delivery. We show that pain induced changes in P-gp trafficking are associated with changes in P-gp’s association with caveolin-1, a key scaffolding/trafficking protein that co-localizes with P-gp at the luminal membrane of brain microvessels. Changes in co-localization with the phosphorylated and non-phosphorylated forms of caveolin-1, by pain, are accompanied by dynamic changes in the distribution, relocalization and activation of P-gp “pools” between microvascular endothelial cell subcellular compartments. Since redox sensitive processes may be involved in signaling disassembly of higher order structures of P-gp, we feel that manipulating redox signaling, via specific protein targeting at the BBB, may protect disulfide bond integrity of P-gp reservoirs and control trafficking to the membrane surface providing improved CNS drug delivery. The advantage of therapeutic drug “relocalization” of a protein is that the physiological impact can be modified, temporarily or long term, despite pathology-induced changes in gene transcription. PMID:25307213

  8. Sublingual drug delivery.

    PubMed

    Goswami, Tarun; Jasti, Bhaskara; Li, Xiaoling

    2008-01-01

    The sublingual route is one of the early modes of administration for systemic drug delivery. This route avoids first-pass metabolism and affords quick drug entry into the systemic circulation. Attempts have been made to deliver various pharmacologically active agents, such as cardiovascular drugs, analgesics, and peptides, across the sublingual mucosa. In this review, the anatomical structure, blood supply, biochemical composition, transport pathways, permeation enhancement strategies, in vitro/in vivo models, and clinical investigations for the sublingual route of drug delivery is discussed.

  9. Design, Development, and Optimization of Polymeric Based-Colonic Drug Delivery System of Naproxen

    PubMed Central

    Sharma, Pooja; Chawla, Anuj; Pawar, Pravin

    2013-01-01

    The aim of present investigation deals with the development of time-dependent and pH sensitive press-coated tablets for colon specific drug delivery of naproxen. The core tablets were prepared by wet granulation method then press coated with hydroxypropyl cellulose (HPC) or Eudragit RSPO : RLPO mixture and further coated with Eudragit S-100 by dip immerse method. The in vitro drug release study was conducted in different dissolution media such as pH 1.2, 6.8, and 7.4 with or without rat caecal content to simulate GIT conditions. Surface morphology and cross-sectional view of the tablets were visualized by scanning electron microscopy (SEM). All prepared batches were in compliance with the pharmacopoeial standards. The tablets which are compression coated with HPC followed by Eudragit S-100 coated showed highest in vitro drug release of 98.10% in presence of rat caecal content. The SEM of tablets suggested that the number of pores got increased in pH 7.4 medium followed by dissolution of coating layer. The tablets coat erosion study suggested that the lag time depends upon the coating concentrations of polymers. A time-dependent hydrophilic polymer and pH sensitive polymer based press-coated tablets of naproxen were promising delivery for colon targeting. PMID:24198725

  10. Mathematical modeling of drug delivery.

    PubMed

    Siepmann, J; Siepmann, F

    2008-12-08

    Due to the significant advances in information technology mathematical modeling of drug delivery is a field of steadily increasing academic and industrial importance with an enormous future potential. The in silico optimization of novel drug delivery systems can be expected to significantly increase in accuracy and easiness of application. Analogous to other scientific disciplines, computer simulations are likely to become an integral part of future research and development in pharmaceutical technology. Mathematical programs can be expected to be routinely used to help optimizing the design of novel dosage forms. Good estimates for the required composition, geometry, dimensions and preparation procedure of various types of delivery systems will be available, taking into account the desired administration route, drug dose and release profile. Thus, the number of required experimental studies during product development can be significantly reduced, saving time and reducing costs. In addition, the quantitative analysis of the physical, chemical and potentially biological phenomena, which are involved in the control of drug release, offers another fundamental advantage: The underlying drug release mechanisms can be elucidated, which is not only of academic interest, but a pre-requisite for an efficient improvement of the safety of the pharmaco-treatments and for effective trouble-shooting during production. This article gives an overview on the current state of the art of mathematical modeling of drug delivery, including empirical/semi-empirical and mechanistic realistic models. Analytical as well as numerical solutions are described and various practical examples are given. One of the major challenges to be addressed in the future is the combination of mechanistic theories describing drug release out of the delivery systems with mathematical models quantifying the subsequent drug transport within the human body in a realistic way. Ideally, the effects of the design

  11. Metrology for drug delivery.

    PubMed

    Lucas, Peter; Klein, Stephan

    2015-08-01

    In various recently published studies, it is argued that there are underestimated risks with infusion technology, i.e., adverse incidents believed to be caused by inadequate administration of the drugs. This is particularly the case for applications involving very low-flow rates, i.e., <1 ml/h and applications involving drug delivery by means of multiple pumps. The risks in infusing are caused by a lack of awareness, incompletely understood properties of the complete drug delivery system and a lack of a proper metrological infrastructure for low-flow rates. Technical challenges such as these were the reason a European research project "Metrology for Drug Delivery" was started in 2011. In this special issue of Biomedical Engineering, the results of that project are discussed.

  12. Mucoadhesive microparticulate drug delivery system of curcumin against Helicobacter pylori infection: Design, development and optimization

    PubMed Central

    Ali, Mohd Sajid; Pandit, Vinay; Jain, Mahendra; Dhar, Kanhiya Lal

    2014-01-01

    The purpose of the present research was to develop and characterize mucoadhesive microspheres of curcumin for the potential use of treating gastric adenocarcinoma, gastric and duodenal ulcer associated with Helicobacter pylori. Curcumin mucoadhesive microspheres were prepared using ethyl cellulose as a matrix and carbopol 934P as a mucoadhesive polymer by an emulsion-solvent evaporation technique. Response surface methodology was used for optimization of formulation using central composite design (CCD) for two factors at three levels each was employed to study the effect of independent variables, drug:polymer:polymer ratio (curcumin:ethylcellulose:carbopol 934P)(X1) and surfactant concentration (X2) on dependent variables, namely drug entrapment efficiency (DEE), percentage mucoadhesion (PM), in vitro drug release and particle size (PS). Optimized formulation was obtained using desirability approach of numerical optimization. The experimental values of DEE, PM, % release and PS after 8 h for the optimized formulation were found to be 50.256 ± 1.38%, 66.23%±0.06, 73.564 ± 1.32%, and 139.881 ± 2.56 μm, respectively, which were in close agreement with those predicted by the mathematical models. The drug release was also found to be slow and extended more than 8 h and release rates were fitted to the Power law equation and Higuchi model to compute the diffusional parameters. The prolonged stomach residence time of curcumin mucoadhesive microspheres might make a contribution to H. pylori complete eradication in combination with other antimicrobial agents. PMID:24696817

  13. Applying the Taguchi method to optimize sumatriptan succinate niosomes as drug carriers for skin delivery.

    PubMed

    González-Rodríguez, Maria Luisa; Mouram, Imane; Cózar-Bernal, Ma Jose; Villasmil, Sheila; Rabasco, Antonio M

    2012-10-01

    Niosomes formulated from different nonionic surfactants (Span® 60, Brij® 72, Span® 80, or Eumulgin® B 2) with cholesterol (CH) molar ratios of 3:1 or 4:1 with respect to surfactant were prepared with different sumatriptan amount (10 and 15 mg) and stearylamine (SA). Thin-film hydration method was employed to produce the vesicles, and the time lapsed to hydrate the lipid film (1 or 24 h) was introduced as variable. These factors were selected as variables and their levels were introduced into two L18 orthogonal arrays. The aim was to optimize the manufacturing conditions by applying Taguchi methodology. Response variables were vesicle size, zeta potential (Z), and drug entrapment. From Taguchi analysis, drug concentration and the time until the hydration were the most influencing parameters on size, being the niosomes made with Span® 80 the smallest vesicles. The presence of SA into the vesicles had a relevant influence on Z values. All the factors except the surfactant-CH ratio had an influence on the encapsulation. Formulations were optimized by applying the marginal means methodology. Results obtained showed a good correlation between mean and signal-to-noise ratio parameters, indicating the feasibility of the robust methodology to optimize this formulation. Also, the extrusion process exerted a positive influence on the drug entrapment.

  14. Drug loading optimization and extended drug delivery of corticoids from pHEMA based soft contact lenses hydrogels via chemical and microstructural modifications.

    PubMed

    García-Millán, Eva; Koprivnik, Sandra; Otero-Espinar, Francisco Javier

    2015-06-20

    This paper proposes an approach to improve drug loading capacity and release properties of poly(2-hydroxyethyl methacrylate) (p(HEMA)) soft contact lenses based on the optimization of the hydrogel composition and microstructural modifications using water during the polymerization process. P(HEMA) based soft contact lenses were prepared by thermal or photopolymerization of 2-hydroxyethyl methacrylate (HEMA) solutions containing ethylene glycol di-methacrylate as crosslinker and different proportions of N-vinyl-2-pyrrolidone (NVP) or methacrylic acid (MA) as co-monomers. Transmittance, water uptake, swelling, microstructure, drug absorption isotherms and in vitro release were characterized using triamcinolone acetonide (TA) as model drug. Best drug loading ratios were obtained with lenses containing the highest amount (200 mM) of MA. Incorporation of 40% V/V of water during the polymerization increases the hydrogel porosity giving a better drug loading capacity. In vitro TA release kinetics shows that MA hydrogels released the drug significantly faster than NVP-hydrogels. Drug release was found to be diffusion controlled and kinetics was shown to be reproducible after consecutive drug loading/release processes. Results of p(HEMA) based soft contact lenses copolymerized with ethylene glycol dimethacrylate (EGDMA) and different co-monomers could be a good alternative to optimize the loading and ocular drug delivery of this corticosteroid drug.

  15. Development and optimization of press coated floating pulsatile drug delivery of sumatriptan succinate.

    PubMed

    Jagdale, Swati C; Pawar, Chandrakala R

    2014-01-01

    Floating pulsatile is combined approach designed according to circadian rhythm to deliver the drug at right time, in right quantity and at right site as per pathophysiological need of disease with prolong gastric residence and lag phase followed by burst release. As the migraine follows circadian rhythm in which headache is more painful at the awakening time, the dosage form should be given during night time to release drug when pain get worsen. Present work deals with formulation and optimization of floating pulsatile tablet of sumatriptan succinate. Core tablet containing crospovidone as superdisintegrant (10%) showed burst release. Lag time was maintained using swellable polymer as polyoxN12K and xanthum gum. 3(2) experimental design was carried out. Developed formulations were evaluated for physical characteristics, in vitro and in vivo study. Optimized batch F2 with concentration of polyox N12K (73.43%) and xanthum gum (26.56%) of total polymer weight showed floating lag time 15±2 sec, drug content 99.58±0.2 %, hardness 6±0.2 Kg/cm(2) and drug release 99.54±2% with pulsatile manner followed lag period of 7±0.1h. In vivo x-ray study confirms prolong gastric residence of system. Programmable pulsatile release has been achieved by formulation F2 which meet demand of chronotherapeutic objective of migraine.

  16. Development and optimization of a self-microemulsifying drug delivery system for atorvastatin calcium by using D-optimal mixture design.

    PubMed

    Yeom, Dong Woo; Song, Ye Seul; Kim, Sung Rae; Lee, Sang Gon; Kang, Min Hyung; Lee, Sangkil; Choi, Young Wook

    2015-01-01

    In this study, we developed and optimized a self-microemulsifying drug delivery system (SMEDDS) formulation for improving the dissolution and oral absorption of atorvastatin calcium (ATV), a poorly water-soluble drug. Solubility and emulsification tests were performed to select a suitable combination of oil, surfactant, and cosurfactant. A D-optimal mixture design was used to optimize the concentration of components used in the SMEDDS formulation for achieving excellent physicochemical characteristics, such as small droplet size and high dissolution. The optimized ATV-loaded SMEDDS formulation containing 7.16% Capmul MCM (oil), 48.25% Tween 20 (surfactant), and 44.59% Tetraglycol (cosurfactant) significantly enhanced the dissolution rate of ATV in different types of medium, including simulated intestinal fluid, simulated gastric fluid, and distilled water, compared with ATV suspension. Good agreement was observed between predicted and experimental values for mean droplet size and percentage of the drug released in 15 minutes. Further, pharmacokinetic studies in rats showed that the optimized SMEDDS formulation considerably enhanced the oral absorption of ATV, with 3.4-fold and 4.3-fold increases in the area under the concentration-time curve and time taken to reach peak plasma concentration, respectively, when compared with the ATV suspension. Thus, we successfully developed an optimized ATV-loaded SMEDDS formulation by using the D-optimal mixture design, that could potentially be used for improving the oral absorption of poorly water-soluble drugs.

  17. Development and optimization of a self-microemulsifying drug delivery system for ator vastatin calcium by using d-optimal mixture design

    PubMed Central

    Yeom, Dong Woo; Song, Ye Seul; Kim, Sung Rae; Lee, Sang Gon; Kang, Min Hyung; Lee, Sangkil; Choi, Young Wook

    2015-01-01

    In this study, we developed and optimized a self-microemulsifying drug delivery system (SMEDDS) formulation for improving the dissolution and oral absorption of atorvastatin calcium (ATV), a poorly water-soluble drug. Solubility and emulsification tests were performed to select a suitable combination of oil, surfactant, and cosurfactant. A d-optimal mixture design was used to optimize the concentration of components used in the SMEDDS formulation for achieving excellent physicochemical characteristics, such as small droplet size and high dissolution. The optimized ATV-loaded SMEDDS formulation containing 7.16% Capmul MCM (oil), 48.25% Tween 20 (surfactant), and 44.59% Tetraglycol (cosurfactant) significantly enhanced the dissolution rate of ATV in different types of medium, including simulated intestinal fluid, simulated gastric fluid, and distilled water, compared with ATV suspension. Good agreement was observed between predicted and experimental values for mean droplet size and percentage of the drug released in 15 minutes. Further, pharmacokinetic studies in rats showed that the optimized SMEDDS formulation considerably enhanced the oral absorption of ATV, with 3.4-fold and 4.3-fold increases in the area under the concentration-time curve and time taken to reach peak plasma concentration, respectively, when compared with the ATV suspension. Thus, we successfully developed an optimized ATV-loaded SMEDDS formulation by using the d-optimal mixture design, that could potentially be used for improving the oral absorption of poorly water-soluble drugs. PMID:26089663

  18. Single compartment drug delivery

    PubMed Central

    Cima, Michael J.; Lee, Heejin; Daniel, Karen; Tanenbaum, Laura M.; Mantzavinou, Aikaterini; Spencer, Kevin C.; Ong, Qunya; Sy, Jay C.; Santini, John; Schoellhammer, Carl M.; Blankschtein, Daniel; Langer, Robert S.

    2014-01-01

    Drug design is built on the concept that key molecular targets of disease are isolated in the diseased tissue. Systemic drug administration would be sufficient for targeting in such a case. It is, however, common for enzymes or receptors that are integral to disease to be structurally similar or identical to those that play important biological roles in normal tissues of the body. Additionally, systemic administration may not lead to local drug concentrations high enough to yield disease modification because of rapid systemic metabolism or lack of sufficient partitioning into the diseased tissue compartment. This review focuses on drug delivery methods that physically target drugs to individual compartments of the body. Compartments such as the bladder, peritoneum, brain, eye and skin are often sites of disease and can sometimes be viewed as “privileged,” since they intrinsically hinder partitioning of systemically administered agents. These compartments have become the focus of a wide array of procedures and devices for direct administration of drugs. We discuss the rationale behind single compartment drug delivery for each of these compartments, and give an overview of examples at different development stages, from the lab bench to phase III clinical trials to clinical practice. We approach single compartment drug delivery from both a translational and a technological perspective. PMID:24798478

  19. Exemestane loaded self-microemulsifying drug delivery system (SMEDDS): development and optimization.

    PubMed

    Singh, Ajeet K; Chaurasiya, Akash; Singh, Manish; Upadhyay, Satish C; Mukherjee, Rama; Khar, Roop K

    2008-01-01

    The purpose of this research work was to formulate and characterize self-micro emulsifying drug delivery system containing exemestane. The solubility of exemestane was determined in various vehicles. Pseudo ternary phase diagram was used to evaluate the micro-emulsification existence area. SMEDDS formulations were tested for micro-emulsifying properties, and the resultant formulations loaded with exemestane (ME1, ME2, ME3, ME4 and ME5) were investigated for clarity, phase separation, globule size and shape, zeta potential, effect of various diluents and dilutions, thermodynamic and thermal stability. From the results it is concluded that increase in droplet size is proportional to the concentration of oil in SMEDDS formulation. Minor difference in the droplet size and zeta potential was observed by varying the diluents (deionized water and 0.1 N HCl) and dilutions (1:10, 1:50 and 1:100). Formulations, which were found to be thermodynamically stable (ME1, ME2, ME3 and ME4), were subjected to stability studies as per International Conference on Harmonization (ICH) guidelines. No significant variations were observed in the formulations over a period of 3 months at accelerated and long-term conditions. TEM photographs of microemulsions formulations further conformed the spherical shape of globules. Among the various SMEDDS formulations, ME4 offer the advantages of good clarity systems at high oil content and thus offer good solubilization of exemestane. Thus this study indicates that the SMEDDS can be used as a potential drug carrier for dissolution enhancement of exemestane and other lipophilic drug(s).

  20. Optimization of combinational intranasal drug delivery system for the management of migraine by using statistical design.

    PubMed

    Kumar, Animesh; Garg, Tarun; Sarma, Ganti S; Rath, Goutam; Goyal, Amit Kumar

    2015-04-05

    Migraine is a chronic disorder characterized by significant headache and various associated symptoms which worsen with exertion. Zolmitriptan approved for use in the acute treatment of migraine and related vascular headaches but are limited by high pain recurrence due to rapid drug elimination. Combinationalformulationof triptans and a nonsteroidal anti-inflammatory drug may provide a quicker and longer duration of relief from the subsequent pain during the attack. In this study, we formulate a Zolmitriptan (ZT) & ketorolac tromethamine (KT) loaded thermo reversible in-situ mucoadhesive intranasal gel (TMISG) formulation which gels at the nasal mucosal temperature and contains a bioadhesive polymer (Xyloglucan) that lengthens the residence time will enhance the bioavailability of the combinational drugs. This study uses Box-Behnken design for the first time to develop, optimize the TMISG and assess factors affecting the critical quality attributes. Histopathological study of the nasal mucosa suggested that the formulation was safe for nasal administration. The statistical difference in absolute bioavailability between oral and intranasal route suggested that intranasal route had almost 21% increases in bioavailability for ZT and for KT there was 16% increase over oral formulations. Optimized formulation would help mitigate migraine associated symptoms much better over the currently available formulations.

  1. Mucoadhesive drug delivery systems

    PubMed Central

    Shaikh, Rahamatullah; Raj Singh, Thakur Raghu; Garland, Martin James; Woolfson, A David; Donnelly, Ryan F.

    2011-01-01

    Mucoadhesion is commonly defined as the adhesion between two materials, at least one of which is a mucosal surface. Over the past few decades, mucosal drug delivery has received a great deal of attention. Mucoadhesive dosage forms may be designed to enable prolonged retention at the site of application, providing a controlled rate of drug release for improved therapeutic outcome. Application of dosage forms to mucosal surfaces may be of benefit to drug molecules not amenable to the oral route, such as those that undergo acid degradation or extensive first-pass metabolism. The mucoadhesive ability of a dosage form is dependent upon a variety of factors, including the nature of the mucosal tissue and the physicochemical properties of the polymeric formulation. This review article aims to provide an overview of the various aspects of mucoadhesion, mucoadhesive materials, factors affecting mucoadhesion, evaluating methods, and finally various mucoadhesive drug delivery systems (buccal, nasal, ocular, gastro, vaginal, and rectal). PMID:21430958

  2. Stealth Amphotericin B nanoparticles for oral drug delivery: In vitro optimization

    PubMed Central

    AL-Quadeib, Bushra T.; Radwan, Mahasen A.; Siller, Lidija; Horrocks, Benjamin; Wright, Matthew C.

    2014-01-01

    (>70%) in MPS with highest drug content. The percentage of PEG in the copolymer and the surfactant/stabilizer used had a direct effect on AmB release in vitro, entrapment efficiency and MPS. These developed formulations are feasible, effective and improved alternatives to other carriers for oral delivery of AmB. PMID:26106277

  3. Preparation, Evaluation and Optimization of Multiparticulate System of Mebendazole for Colon Targeted Drug Delivery by Using Natural Polysaccharides

    PubMed Central

    Hemraj Ramteke, Kuldeep; Balaji Jadhav, Varsha; Kulkarni, Nilesh Shrikant; Kharat, Amol Rameshrao; Diwate, Sonali Bhima

    2015-01-01

    Purpose: A Multiparticulate system of Mebendazole was developed for colon targeted drug delivery by using natural polysaccharides like Chitosan and Sodium-alginate beads. Methods: Chitosan microspheres were formulated by using Emulsion crosslinking method using Glutaraldehyde as crosslinking agent. Sodium-alginate beads were formulated by using Calcium chloride as gelling agent. Optimization for Chitosan microspheres was carried out by using 23 full factorial design. 32 full factorial design was used for the optimization of Sodium-alginate beads. The formulated batches were evaluated for percentage yield, particle size measurement, flow properties, percent entrapment efficiency, Swelling studies. The formulations were subjected to Stability studies and In-vitro release study (with and without rat caecal content). Release kinetics data was subjected to different dissolution models. Results: The formulated batches showed acceptable particle size range as well as excellent flow properties. Entrapment efficiency for optimized batches of Chitosan microspheres and sodium alginate beads was found to be 74.18% and 88.48% respectively. In-vitro release of drug for the optimized batches was found to be increased in presence of rat caecal content. The best-fit models were koresmeyer-peppas for Chitosan microspheres and zero order for sodium-alginate beads. Conclusion: Chitosan and Sodium-alginate was used successfully for the formulation of Colon targeted Multiparticulate system. PMID:26504758

  4. Transmucosal macromolecular drug delivery.

    PubMed

    Prego, C; García, M; Torres, D; Alonso, M J

    2005-01-03

    Mucosal surfaces are the most common and convenient routes for delivering drugs to the body. However, macromolecular drugs such as peptides and proteins are unable to overcome the mucosal barriers and/or are degraded before reaching the blood stream. Among the approaches explored so far in order to optimize the transport of these macromolecules across mucosal barriers, the use of nanoparticulate carriers represents a challenging but promising strategy. The present paper aims to compare the characteristics and potential of nanostructures based on the mucoadhesive polysaccharide chitosan (CS). These are CS nanoparticles, CS-coated oil nanodroplets (nanocapsules) and CS-coated lipid nanoparticles. The characteristics and behavior of CS nanoparticles and CS-coated lipid nanoparticles already reported [A. Vila, A. Sanchez, M. Tobio, P. Calvo, M.J. Alonso, Design of biodegradable particles for protein delivery, J. Control. Rel. 78 (2002) 15-24; R. Fernandez-Urrusuno, P. Calvo, C. Remunan-Lopez, J.L. Vila-Jato, M.J. Alonso, Enhancement of nasal absorption of insulin using chitosan nanoparticles, Pharm. Res. 16 (1999) 1576-1581; M. Garcia-Fuentes, D. Torres, M.J. Alonso, New surface-modified lipid nanoparticles as delivery vehicles for salmon calcitonin (submitted for publication).] are compared with those of CS nanocapsules originally reported here. The three types of systems have a size in the nanometer range and a positive zeta potential that was attributed to the presence of CS on their surface. They showed an important capacity for the association of peptides such as insulin, salmon calcitonin and proteins, such as tetanus toxoid. Their mechanism of interaction with epithelia was investigated using the Caco-2 model cell line. The results showed that CS-coated systems caused a concentration-dependent reduction in the transepithelial resistance of the cell monolayer. Moreover, within the range of concentrations investigated, these systems were internalized in the

  5. Formulation and optimization of fast dissolving intraoral drug delivery system for clobazam using response surface methodology

    PubMed Central

    Bala, Rajni; Khanna, Sushil; Pawar, Pravin K.

    2013-01-01

    Clobazam is a newer 1,5-benzodiazepine used for the treatment of epilepsy. It is better tolerated and less sedating than other benzodiazepines. Absorption of the drug can be impacted by oral fast dissolving dosage form; this may have implications for epilepsy in pediatrics and those having difficulty in swallowing tablets/capsules resulting in improved patient compliance. The purpose of the present investigation was to formulate and optimize clobazam oro-dissolving tablets by direct compression method using response surface methodology (RSM). Oro-dispersible tablets of clobazam were prepared by direct compression method using crospovidone (2-6%) as a superdisintegrant, microcrystalline cellulose (MCC) (20-40%) was used as diluents along with directly compressible mannitol to enhance mouth feel. A 32 full factorial design was applied to investigate the combined effect of two formulation variables: amount of crospovidone and MCC over the independent variables disintegration time, wetting time and percent drug release. Disintegration time showed by all formulations was found to be in the range of 24.3-193 s based on evaluation parameters the formulation containing 6% of crospovidone and 30% of MCC showed promising performance against all other formulations. The results demonstrated that the RSM could efficiently be applied for the formulation of clobazam oro-dispersible tablets; therefore, constitute an advance in the management of epileptic attacks. PMID:24083203

  6. Optimizing non-invasive radiofrequency hyperthermia treatment for improving drug delivery in 4T1 mouse breast cancer model

    PubMed Central

    Ware, Matthew J.; Krzykawska-Serda, Martyna; Chak-Shing Ho, Jason; Newton, Jared; Suki, Sarah; Law, Justin; Nguyen, Lam; Keshishian, Vazrik; Serda, Maciej; Taylor, Kimberly; Curley, Steven A.; Corr, Stuart J.

    2017-01-01

    Interactions of high-frequency radio waves (RF) with biological tissues are currently being investigated as a therapeutic platform for non-invasive cancer hyperthermia therapy. RF delivers thermal energy into tissues, which increases intra-tumoral drug perfusion and blood-flow. Herein, we describe an optical-based method to optimize the short-term treatment schedules of drug and hyperthermia administration in a 4T1 breast cancer model via RF, with the aim of maximizing drug localization and homogenous distribution within the tumor microenvironment. This method, based on the analysis of fluorescent dyes localized into the tumor, is more time, cost and resource efficient, when compared to current analytical methods for tumor-targeting drug analysis such as HPLC and LC-MS. Alexa-Albumin 647 nm fluorphore was chosen as a surrogate for nab-paclitaxel based on its similar molecular weight and albumin driven pharmacokinetics. We found that RF hyperthermia induced a 30–40% increase in Alexa-Albumin into the tumor micro-environment 24 h after treatment when compared to non-heat treated mice. Additionally, we showed that the RF method of delivering hyperthermia to tumors was more localized and uniform across the tumor mass when compared to other methods of heating. Lastly, we provided insight into some of the factors that influence the delivery of RF hyperthermia to tumors. PMID:28287120

  7. Optimizing non-invasive radiofrequency hyperthermia treatment for improving drug delivery in 4T1 mouse breast cancer model

    NASA Astrophysics Data System (ADS)

    Ware, Matthew J.; Krzykawska-Serda, Martyna; Chak-Shing Ho, Jason; Newton, Jared; Suki, Sarah; Law, Justin; Nguyen, Lam; Keshishian, Vazrik; Serda, Maciej; Taylor, Kimberly; Curley, Steven A.; Corr, Stuart J.

    2017-03-01

    Interactions of high-frequency radio waves (RF) with biological tissues are currently being investigated as a therapeutic platform for non-invasive cancer hyperthermia therapy. RF delivers thermal energy into tissues, which increases intra-tumoral drug perfusion and blood-flow. Herein, we describe an optical-based method to optimize the short-term treatment schedules of drug and hyperthermia administration in a 4T1 breast cancer model via RF, with the aim of maximizing drug localization and homogenous distribution within the tumor microenvironment. This method, based on the analysis of fluorescent dyes localized into the tumor, is more time, cost and resource efficient, when compared to current analytical methods for tumor-targeting drug analysis such as HPLC and LC-MS. Alexa-Albumin 647 nm fluorphore was chosen as a surrogate for nab-paclitaxel based on its similar molecular weight and albumin driven pharmacokinetics. We found that RF hyperthermia induced a 30–40% increase in Alexa-Albumin into the tumor micro-environment 24 h after treatment when compared to non-heat treated mice. Additionally, we showed that the RF method of delivering hyperthermia to tumors was more localized and uniform across the tumor mass when compared to other methods of heating. Lastly, we provided insight into some of the factors that influence the delivery of RF hyperthermia to tumors.

  8. Optimizing non-invasive radiofrequency hyperthermia treatment for improving drug delivery in 4T1 mouse breast cancer model.

    PubMed

    Ware, Matthew J; Krzykawska-Serda, Martyna; Chak-Shing Ho, Jason; Newton, Jared; Suki, Sarah; Law, Justin; Nguyen, Lam; Keshishian, Vazrik; Serda, Maciej; Taylor, Kimberly; Curley, Steven A; Corr, Stuart J

    2017-03-13

    Interactions of high-frequency radio waves (RF) with biological tissues are currently being investigated as a therapeutic platform for non-invasive cancer hyperthermia therapy. RF delivers thermal energy into tissues, which increases intra-tumoral drug perfusion and blood-flow. Herein, we describe an optical-based method to optimize the short-term treatment schedules of drug and hyperthermia administration in a 4T1 breast cancer model via RF, with the aim of maximizing drug localization and homogenous distribution within the tumor microenvironment. This method, based on the analysis of fluorescent dyes localized into the tumor, is more time, cost and resource efficient, when compared to current analytical methods for tumor-targeting drug analysis such as HPLC and LC-MS. Alexa-Albumin 647 nm fluorphore was chosen as a surrogate for nab-paclitaxel based on its similar molecular weight and albumin driven pharmacokinetics. We found that RF hyperthermia induced a 30-40% increase in Alexa-Albumin into the tumor micro-environment 24 h after treatment when compared to non-heat treated mice. Additionally, we showed that the RF method of delivering hyperthermia to tumors was more localized and uniform across the tumor mass when compared to other methods of heating. Lastly, we provided insight into some of the factors that influence the delivery of RF hyperthermia to tumors.

  9. Photomechanical drug delivery

    NASA Astrophysics Data System (ADS)

    Doukas, Apostolos G.; Lee, Shun

    2000-05-01

    Photomechanical waves (PW) are generated by Q-switched or mode-locked lasers. Ablation is a reliable method for generating PWs with consistent characteristics. Depending on the laser wavelength and target material, PWs with different parameters can be generated which allows the investigation of PWs with cells and tissue. PWs have been shown to permeabilize the stratum corneum (SC) in vivo and facilitate the transport of drugs into the skin. Once a drug has diffused into the dermis it can enter the vasculature, thus producing a systemic effect. Fluorescence microscopy of biopsies show that 40-kDa molecules can be delivered to a depth of > 300 micrometers into the viable skin of rats. Many important drugs such as insulin, and erythropoietin are smaller or comparable in size, making the PWs attractive for transdermal drug delivery. There are three possible pathways through the SC: Transappendageal via hair follicles or other appendages, transcellular through the corneocytes, and intercellular via the extracellular matrix. The intracellular route appears to be the most likely pathway of drug delivery through the SC.

  10. Design, optimization and evaluation of glipizide solid self-nanoemulsifying drug delivery for enhanced solubility and dissolution

    PubMed Central

    Dash, Rajendra Narayan; Mohammed, Habibuddin; Humaira, Touseef; Ramesh, Devi

    2015-01-01

    A solid self-nanoemulsifying drug-delivery system (solid SNEDDS) has been explored to improve the solubility and dissolution profile of glipizide. SNEDDS preconcentrate was systematically optimized using a circumscribed central composite design by varying Captex 355 (Oil), Solutol HS15 (Surfactant) and Imwitor 988 (Co-surfactant). The optimized SNEDDS preconcentrate consisted of Captex 355 (30% w/w), Solutol HS15 (45% w/w) and Imwitor 988 (25% w/w). The saturation solubility (SS) of glipizide in optimized SNEDDS preconcentrate was found to be 45.12 ± 1.36 mg/ml, indicating an improvement (1367 times) of glipizide solubility as compared to its aqueous solubility (0.033 ± 0.0021 mg/ml). At 90% SS, glipizide was loaded to the optimized SNEDDS. In-vitro dilution of liquid SNEDDS resulted in a nanoemulsion with a mean droplet size of 29.4 nm. TEM studies of diluted liquid SNEDDS confirmed the uniform shape and size of the globules. The liquid SNEDDS was adsorbed onto calcium carbonate and talc to form solid SNEDDS. PXRD, DSC, and SEM results indicated that, the presence of glipizide as an amorphous and as a molecular dispersion state within solid SNEDDS. Glipizide dissolution improved significantly (p < 0.001) from the solid SNEDDS (∼100% in 15 min) as compared to the pure drug (18.37%) and commercial product (65.82) respectively. PMID:26594119

  11. Nanomaterials for Drugs Delivery

    DOE PAGES

    Márquez, Francisco; Morant, Carmen

    2014-07-01

    Nanotechnology has revolutionized engineering, biology, chemistry, physics and medicine of today. These disciplines are evolving thanks to the ongoing development of new materials and applications. Nanomedicine, as application of nanotechnology in the field of health care, has undergone unprecedented development. Some of these changes have real applications as, for example, the use of nanoparticles in MRI imaging, in hyperthermia, in immunotherapy, or to improve the bioavailability of drugs, among others. Furthermore, when a drug is administered to a patient, the blood distributes it throughout the body. In the case of very localized diseases (i.e. tumors), only a small fraction ofmore » the drug reaches the target. Chemotherapy is one of the most aggressive treatment options used in some types of cancer, and is usually administered intravenously. The drug circulates throughout the body, reaching and destroying healthy and cancerous tissues, producing side effects throughout the body, sometimes with serious consequences for the health of the patient (nephrotoxicity, cardiotoxicity, peripheral neuropathy, anemia, etc.) in this type of therapy. Among the many applications of nanotechnology, the fabrication of nanostructures capable of safely transporting these drugs is seen as a strategy for reducing these side effects. Nanoparticles are able to carry and release the drug in the right place and with the required dose, greatly reducing the problems associated with direct treatment with these drugs. In recent years, there have been continuous improvements in the design and development of new tailor-made drug delivery systems, including hollow magnetic nanoparticles, liposomal structures, dendrimers, nanoporous silicon, etc. These structures can be obtained with different molecular weights (in the case of polymers), structures, shapes, and even with the appropriate functional groups for interaction at the desired positions. But, a great effort is still required to

  12. Nanomaterials for Drugs Delivery

    SciTech Connect

    Márquez, Francisco; Morant, Carmen

    2014-07-01

    Nanotechnology has revolutionized engineering, biology, chemistry, physics and medicine of today. These disciplines are evolving thanks to the ongoing development of new materials and applications. Nanomedicine, as application of nanotechnology in the field of health care, has undergone unprecedented development. Some of these changes have real applications as, for example, the use of nanoparticles in MRI imaging, in hyperthermia, in immunotherapy, or to improve the bioavailability of drugs, among others. Furthermore, when a drug is administered to a patient, the blood distributes it throughout the body. In the case of very localized diseases (i.e. tumors), only a small fraction of the drug reaches the target. Chemotherapy is one of the most aggressive treatment options used in some types of cancer, and is usually administered intravenously. The drug circulates throughout the body, reaching and destroying healthy and cancerous tissues, producing side effects throughout the body, sometimes with serious consequences for the health of the patient (nephrotoxicity, cardiotoxicity, peripheral neuropathy, anemia, etc.) in this type of therapy. Among the many applications of nanotechnology, the fabrication of nanostructures capable of safely transporting these drugs is seen as a strategy for reducing these side effects. Nanoparticles are able to carry and release the drug in the right place and with the required dose, greatly reducing the problems associated with direct treatment with these drugs. In recent years, there have been continuous improvements in the design and development of new tailor-made drug delivery systems, including hollow magnetic nanoparticles, liposomal structures, dendrimers, nanoporous silicon, etc. These structures can be obtained with different molecular weights (in the case of polymers), structures, shapes, and even with the appropriate functional groups for interaction at the desired positions. But, a great effort is still required to solve many

  13. DOE Optimization of Nano-based Carrier of Pregabalin as Hydrogel: New Therapeutic & Chemometric Approaches for Controlled Drug Delivery Systems

    NASA Astrophysics Data System (ADS)

    Arafa, Mona G.; Ayoub, Bassam M.

    2017-01-01

    Niosomes entrapping pregabalin (PG) were prepared using span 60 and cholesterol in different molar ratios by hydration method, the remaining PG from the hydrating solution was separated from vesicles by freeze centrifugation. Optimization of nano-based carrier of pregabalin (PG) was achieved. Quality by Design strategy was successfully employed to obtain PG-loaded niosomes with the desired properties. The optimal particle size, drug release and entrapment efficiency were attained by Minitab® program using design of experiment (DOE) that predicted the best parameters by investigating the combined effect of different factors simultaneously. Pareto chart was used in the screening step to exclude the insignificant variables while response surface methodology (RSM) was used in the optimization step to study the significant factors. Best formula was selected to prepare topical hydrogels loaded with niosomal PG using HPMC and Carbopol 934. It was verified, by means of mechanical and rheological tests, that addition of the vesicles to the gel matrix affected significantly gel network. In vitro release and ex vivo permeation experiments were carried out. Delivery of PG molecules followed a Higuchi, non Fickian diffusion. The present work will be of interest for pharmaceutical industry as a controlled transdermal alternative to the conventional oral route.

  14. DOE Optimization of Nano-based Carrier of Pregabalin as Hydrogel: New Therapeutic & Chemometric Approaches for Controlled Drug Delivery Systems

    PubMed Central

    Arafa, Mona G.; Ayoub, Bassam M.

    2017-01-01

    Niosomes entrapping pregabalin (PG) were prepared using span 60 and cholesterol in different molar ratios by hydration method, the remaining PG from the hydrating solution was separated from vesicles by freeze centrifugation. Optimization of nano-based carrier of pregabalin (PG) was achieved. Quality by Design strategy was successfully employed to obtain PG-loaded niosomes with the desired properties. The optimal particle size, drug release and entrapment efficiency were attained by Minitab® program using design of experiment (DOE) that predicted the best parameters by investigating the combined effect of different factors simultaneously. Pareto chart was used in the screening step to exclude the insignificant variables while response surface methodology (RSM) was used in the optimization step to study the significant factors. Best formula was selected to prepare topical hydrogels loaded with niosomal PG using HPMC and Carbopol 934. It was verified, by means of mechanical and rheological tests, that addition of the vesicles to the gel matrix affected significantly gel network. In vitro release and ex vivo permeation experiments were carried out. Delivery of PG molecules followed a Higuchi, non Fickian diffusion. The present work will be of interest for pharmaceutical industry as a controlled transdermal alternative to the conventional oral route. PMID:28134262

  15. Formulation, characterization and optimization of valsartan self-microemulsifying drug delivery system using statistical design of experiment.

    PubMed

    Poudel, Bijay Kumar; Marasini, Nirmal; Tran, Tuan Hiep; Choi, Han-Gon; Yong, Chul Soon; Kim, Jong Oh

    2012-01-01

    The aim of the present research was to systematically investigate the main, interaction and the quadratic effects of formulation variables on the performance of self-microemulsifying drug delivery system (SMEDDS) of valsartan using design of experiment. A 17-run Box-Behnken design (BBD) with 3-factors and 3-levels, including 5 replicates at the centre point, was used for fitting a 2nd-order response surface. After the preliminary screening, Labrafil M 2125 CS as oil, Tween 20 as surfactant and Capryol 90 as co-surfactant were taken as independent variables. The dependent factors (responses) were particle size, polydispersity index (PDI), dissolution after 15 min and equilibrium solubility. Coefficients were estimated by regression analysis and the model adequacy was checked by an F-test and the determination coefficient (R(2)). All the responses were optimized simultaneously by using desirability function. Our results demonstrated marked main and interaction effects of independent factors on responses. The optimized formulation consisted of 26.8% (w/w) oil, 60.1% (w/w) surfactant and 13.1% (w/w) co-surfactant, and showed average micelle size of 90.7 nm and 0.246 PDI, 91.2% dissolution after 15 min and 226.7 mg/g equilibrium solubility. For the optimized formulation, predicted value and experimental value were in close agreement. After oral administration, the optimized formulation gave more than 2-fold higher area under curve (AUC) and about 6-fold higher C(max) in rats than valsartan powder (p<0.05). The BBD facilitated in the better understanding of inherent relationship of formulation variables with the responses and in the optimization of valsartan SMEDDS in relatively time and labor effective manner.

  16. Polymers for Drug Delivery Systems

    PubMed Central

    Liechty, William B.; Kryscio, David R.; Slaughter, Brandon V.; Peppas, Nicholas A.

    2012-01-01

    Polymers have played an integral role in the advancement of drug delivery technology by providing controlled release of therapeutic agents in constant doses over long periods, cyclic dosage, and tunable release of both hydrophilic and hydrophobic drugs. From early beginnings using off-the-shelf materials, the field has grown tremendously, driven in part by the innovations of chemical engineers. Modern advances in drug delivery are now predicated upon the rational design of polymers tailored for specific cargo and engineered to exert distinct biological functions. In this review, we highlight the fundamental drug delivery systems and their mathematical foundations and discuss the physiological barriers to drug delivery. We review the origins and applications of stimuli-responsive polymer systems and polymer therapeutics such as polymer-protein and polymer-drug conjugates. The latest developments in polymers capable of molecular recognition or directing intracellular delivery are surveyed to illustrate areas of research advancing the frontiers of drug delivery. PMID:22432577

  17. Microprocessor controlled transdermal drug delivery.

    PubMed

    Subramony, J Anand; Sharma, Ashutosh; Phipps, J B

    2006-07-06

    Transdermal drug delivery via iontophoresis is reviewed with special focus on the delivery of lidocaine for local anesthesia and fentanyl for patient controlled acute therapy such as postoperative pain. The role of the microprocessor controller in achieving dosimetry, alternating/reverse polarity, pre-programmed, and sensor-based delivery is highlighted. Unique features such as the use of tactile signaling, telemetry control, and pulsatile waveforms in iontophoretic drug delivery are described briefly.

  18. Controlled Drug Delivery Using Microdevices

    PubMed Central

    Sanjay, Sharma T.; Dou, Maowei; Fu, Guanglei; Xu, Feng; Li, XiuJun

    2016-01-01

    Therapeutic drugs administered systematically are evenly distributed to the whole body through blood circulation and have to cross many biological barriers before reaching the pathological site. Conventional drug delivery may make drugs inactive or reduce their potency as they may be hydrolyzed or degraded enzymatically and are rapidly excreted through the urinary system resulting in suboptimal concentration of drugs at the desired site. Controlled drug delivery aims to localize the pharmacological activity of the drug to the desired site at desired release rates. The advances made by micro/nanofluidic technologies have provided new opportunities for better-controlled drug delivery. Various components of a drug delivery system can be integrated within a single tiny micro/nanofluidic chip. This article reviews recent advances of controlled drug delivery made by microfluidic/nanofluidic technologies. We first discuss microreservoir-based drug delivery systems. Then we highlight different kinds of microneedles used for controlled drug delivery, followed with a brief discussion about the current limitations and the future prospects of controlled drug delivery systems. PMID:26813304

  19. Ultrasound mediated nanoparticle drug delivery

    NASA Astrophysics Data System (ADS)

    Mullin, Lee B.

    Ultrasound is not only a powerful diagnostic tool, but also a promising therapeutic technology that can be used to improve localized drug delivery. Microbubble contrast agents are micron sized encapsulated gas filled bubbles that are administered intravenously. Originally developed to enhance ultrasound images, microbubbles are highly echogenic due to the gas core that provides a detectable impedance difference from the surrounding medium. The core also allows for controlled response of the microbubbles to ultrasound pulses. Microbubbles can be pushed using acoustic radiation force and ruptured using high pressures. Destruction of microbubbles can increase permeability at the cellular and vascular level, which can be advantageous for drug delivery. Advances in drug delivery methods have been seen with the introduction of nanoparticles, nanometer sized objects often carrying a drug payload. In chemotherapy, nanoparticles can deliver drugs to tumors while limiting systemic exposure due to abnormalities in tumor vasculature such large gaps between endothelial cells that allow nanoparticles to enter into the interstitial space; this is referred to as the enhanced permeability and retention (EPR) effect. However, this effect may be overestimated in many tumors. Additionally, only a small percentage of the injected dose accumulates in the tumor, which most the nanoparticles accumulating in the liver and spleen. It is hypothesized that combining the acoustic activity of an ultrasound contrast agent with the high payload and extravasation ability of a nanoparticle, localized delivery to the tumor with reduced systemic toxicity can be achieved. This method can be accomplished by either loading nanoparticles onto the shell of the microbubble or through a coadministration method of both nanoparticles and microbubbles. The work presented in this dissertation utilizes novel and commercial nanoparticle formulations, combined with microbubbles and a variety of ultrasound systems

  20. Characterization and optimization of pH-responsive polymer nanoparticles for drug delivery to oral biofilms.

    PubMed

    Zhou, Jiayi; Horev, Benjamin; Hwang, Geelsu; Klein, Marlise I; Koo, Hyun; Benoit, Danielle S W

    2016-05-14

    We previously reported on cationic, pH-responsive p(DMAEMA)-b-p(DMAEMA-co-BMA-co-PAA) block copolymer micelles with high affinity for dental and biofilm surfaces and efficient anti-bacterial drug release in response to acidic pH, characteristic of cariogenic (tooth-decay causing) biofilm microenvironments. Here, we show that micelle pH-responsive behaviors can be enhanced through alterations in corona:core molecular weight ratios (CCR). Although similarly stable at physiological pH, upon exposure to acidic pH, micelles with CCR of 4.1 were less stable than other CCR examined. Specifically, a ~1.5-fold increase in critical micelle concentration (CMC) and ~50% decrease in micelle diameters were observed for micelles with CCR of 4.1, compared to no changes in micelles with CCR of 0.8. While high CCR was shown to enhance pH-responsive drug release, it did not alter drug loading and dental surface binding of micelles. Diblocks were shown to encapsulate the antibacterial drug, farnesol, at maximal loading capacities of up to ~27 wt% and at >94% efficiencies, independent of CCR or core size, resulting in micelle diameter increases due to contributions of drug volume. Additionally, micelles with small diameters (~17 nm) show high binding capacity to hydroxyapatite and dental pellicle emulating surfaces based on Langmuir fit analyses of binding data. Finally, micelles with high CCR that have enhanced pH-responsive drug release and binding were shown to exhibit greater antibiofilm efficacy in situ. Overall, these data demonstrate how factors essential for nanoparticle carrier (NPC)-mediated drug deliverycan be enhanced via modification of diblock characteristics, resulting in greater antibiofilm efficacy in situ.

  1. MRI in ocular drug delivery

    PubMed Central

    Li, S. Kevin; Lizak, Martin J.; Jeong, Eun-Kee

    2008-01-01

    Conventional pharmacokinetic methods for studying ocular drug delivery are invasive and cannot be conveniently applied to humans. The advancement of MRI technology has provided new opportunities in ocular drug-delivery research. MRI provides a means to non-invasively and continuously monitor ocular drug-delivery systems with a contrast agent or compound labeled with a contrast agent. It is a useful technique in pharmacokinetic studies, evaluation of drug-delivery methods, and drug-delivery device testing. Although the current status of the technology presents some major challenges to pharmaceutical research using MRI, it has a lot of potential. In the past decade, MRI has been used to examine ocular drug delivery via the subconjunctival route, intravitreal injection, intrascleral injection to the suprachoroidal space, episcleral and intravitreal implants, periocular injections, and ocular iontophoresis. In this review, the advantages and limitations of MRI in the study of ocular drug delivery are discussed. Different MR contrast agents and MRI techniques for ocular drug-delivery research are compared. Ocular drug-delivery studies using MRI are reviewed. PMID:18186077

  2. Modeling of dispersed-drug delivery from planar polymeric systems: optimizing analytical solutions.

    PubMed

    Helbling, Ignacio M; Ibarra, Juan C D; Luna, Julio A; Cabrera, María I; Grau, Ricardo J A

    2010-11-15

    Analytical solutions for the case of controlled dispersed-drug release from planar non-erodible polymeric matrices, based on Refined Integral Method, are presented. A new adjusting equation is used for the dissolved drug concentration profile in the depletion zone. The set of equations match the available exact solution. In order to illustrate the usefulness of this model, comparisons with experimental profiles reported in the literature are presented. The obtained results show that the model can be employed in a broad range of applicability.

  3. Cell-Mediated Drugs Delivery

    PubMed Central

    Batrakova, Elena V.; Gendelman, Howard E.; Kabanov, Alexander V.

    2011-01-01

    INTRODUCTION Drug targeting to sites of tissue injury, tumor or infection with limited toxicity is the goal for successful pharmaceutics. Immunocytes (including mononuclear phagocytes (dendritic cells, monocytes and macrophages), neutrophils, and lymphocytes) are highly mobile; they can migrate across impermeable barriers and release their drug cargo at sites of infection or tissue injury. Thus immune cells can be exploited as trojan horses for drug delivery. AREAS COVERED IN THIS REVIEW This paper reviews how immunocytes laden with drugs can cross the blood brain or blood tumor barriers, to facilitate treatments for infectious diseases, injury, cancer, or inflammatory diseases. The promises and perils of cell-mediated drug delivery are reviewed, with examples of how immunocytes can be harnessed to improve therapeutic end points. EXPERT OPINION Using cells as delivery vehicles enables targeted drug transport, and prolonged circulation times, along with reductions in cell and tissue toxicities. Such systems for drug carriage and targeted release represent a novel disease combating strategy being applied to a spectrum of human disorders. The design of nanocarriers for cell-mediated drug delivery may differ from those used for conventional drug delivery systems; nevertheless, engaging different defense mechanisms into drug delivery may open new perspectives for the active delivery of drugs. PMID:21348773

  4. Effect of co-administration of probiotics with polysaccharide based colon targeted delivery systems to optimize site specific drug release.

    PubMed

    Prudhviraj, G; Vaidya, Yogyata; Singh, Sachin Kumar; Yadav, Ankit Kumar; Kaur, Puneet; Gulati, Monica; Gowthamarajan, K

    2015-11-01

    Significant clinical success of colon targeted dosage forms has been limited by their inappropriate release profile at the target site. Their failure to release the drug completely in the colon may be attributed to changes in the colonic milieu because of pathological state, drug effect and psychological stress accompanying the diseased state or, a combination of these. Alteration in normal colonic pH and bacterial picture leads to incomplete release of drug from the designed delivery system. We report the effectiveness of a targeted delivery system wherein the constant replenishment of the colonic microbiota is achieved by concomitant administration of probiotics along with the polysaccharide based drug delivery system. Guar gum coated spheroids of sulfasalazine were prepared. In the dissolution studies, these spheroids showed markedly higher release in the simulated colonic fluid. In vivo experiments conducted in rats clearly demonstrated the therapeutic advantage of co-administration of probiotics with guar gum coated spheroids. Our results suggest that concomitant use of probiotics along with the polysaccharide based delivery systems can be a simple strategy to achieve satisfactory colon targeting of drugs.

  5. Ultrasound mediated transdermal drug delivery.

    PubMed

    Azagury, Aharon; Khoury, Luai; Enden, Giora; Kost, Joseph

    2014-06-01

    Transdermal drug delivery offers an attractive alternative to the conventional drug delivery methods of oral administration and injections. However, the stratum corneum serves as a barrier that limits the penetration of substances to the skin. Application of ultrasound (US) irradiation to the skin increases its permeability (sonophoresis) and enables the delivery of various substances into and through the skin. This review presents the main findings in the field of sonophoresis in transdermal drug delivery as well as transdermal monitoring and the mathematical models associated with this field. Particular attention is paid to the proposed enhancement mechanisms and future trends in the fields of cutaneous vaccination and gene therapy.

  6. Formulation optimization of Docetaxel loaded self-emulsifying drug delivery system to enhance bioavailability and anti-tumor activity

    PubMed Central

    Valicherla, Guru R.; Dave, Kandarp M.; Syed, Anees A.; Riyazuddin, Mohammed; Gupta, Anand P.; Singh, Akhilesh; Wahajuddin; Mitra, Kalyan; Datta, Dipak; Gayen, Jiaur R.

    2016-01-01

    Poor bioavailability of Docetaxel (DCT) arising due to its low aqueous solubility and permeability limits its clinical utility. The aim of the present study was to develop DCT loaded self-emulsified drug delivery systems (D-SEDDS) and evaluate its potential ability to improve the oral bioavailability and therapeutic efficacy of DCT. D-SEDDS were characterized for their in vitro antitumor activity, in situ single pass intestinal perfusion (SPIP), bioavailability, chylomicron flow blocking study and bio-distribution profile. The D-SEDDS were prepared using Capryol 90, Vitamin E TPGS, Gelucire 44/14 and Transcutol HP with a ratio of 32.7/29.4/8.3/29.6 using D-Optimal Mixture Design. The solubility of DCT was improved upto 50 mg/mL. The oral bioavailability of the D-SEDDS in rats (21.84 ± 3.12%) was increased by 3.19 fold than orally administered Taxotere (6.85 ± 1.82%). The enhanced bioavailability was probably due to increase in solubility and permeability. In SPIP, effective permeability of D-SEDDS was significantly higher than Taxotere. D-SEDDS showed 25 fold more in vitro cytotoxic activity compared to free DCT. Chylomicron flow blocking study and tissue distribution demonstrated the intestinal lymphatic transport of D-SEDDS and higher retention in tumor than Taxotere. The data suggests that D-SEDDS showed desired stability, enhanced oral bioavailability and in vitro antitumor efficacy. PMID:27241877

  7. Understanding the interaction of amorphous calcium polyphosphate with aqueous environments to optimize its use as a localized drug delivery matrix

    NASA Astrophysics Data System (ADS)

    Djogbenou, Nancy

    Amorphous calcium polyphosphate (CPP) shows potential as an implantable drug delivery matrix through a simple gelling protocol that has been shown to eliminate burst release and extend drug release time from the matrix. The nature of the interaction of CPP with aqueous environments and different drugs is not yet well understood. For this reason, CPP samples were manufactured using two different methods: the established gelation protocol, with and without drug, and mixing CPP with different volumes of aqueous solutions to better understand the effect of water exposure on the structural and drug release properties of CPP. Exposure to aqueous systems caused a reduction in the chain length of CPP that was dependant on gel time and mode of exposure. Longer gel times or increased volume of water used during exposure also caused the formation of crystalline material upon drying. In general, drug release was a function of aqueous exposure and the therapeutic agent used. Drug elution studies showed an increase in the burst release of vancomycin (VCM) from CPP gelled for extended periods. When total gel time was 10 hours or below samples that were gelled for only a short time during drug loading performed best. CPP loaded with BSA had a much slower release rate than VCM and appeared to release BSA by a different mechanism. Overall, this thesis shows that CCP drug delivery matrices can be produced with tailored properties simply by controlling processing conditions.

  8. Drug delivery to the ear.

    PubMed

    Hoskison, E; Daniel, M; Al-Zahid, S; Shakesheff, K M; Bayston, R; Birchall, J P

    2013-01-01

    Drug delivery to the ear is used to treat conditions of the middle and inner ear such as acute and chronic otitis media, Ménière's disease, sensorineural hearing loss and tinnitus. Drugs used include antibiotics, antifungals, steroids, local anesthetics and neuroprotective agents. A literature review was conducted searching Medline (1966-2012), Embase (1988-2012), the Cochrane Library and Ovid (1966-2012), using search terms 'drug delivery', 'middle ear', 'inner ear' and 'transtympanic'. There are numerous methods of drug delivery to the middle ear, which can be categorized as topical, systemic (intravenous), transtympanic and via the Eustachian tube. Localized treatments to the ear have the advantages of targeted drug delivery allowing higher therapeutic doses and minimizing systemic side effects. The ideal scenario would be a carrier system that could cross the intact tympanic membrane loaded with drugs or biochemical agents for the treatment of middle and inner ear conditions.

  9. Intranasal delivery of antipsychotic drugs.

    PubMed

    Katare, Yogesh K; Piazza, Justin E; Bhandari, Jayant; Daya, Ritesh P; Akilan, Kosalan; Simpson, Madeline J; Hoare, Todd; Mishra, Ram K

    2016-11-29

    Antipsychotic drugs are used to treat psychotic disorders that afflict millions globally and cause tremendous emotional, economic and healthcare burdens. However, the potential of intranasal delivery to improve brain-specific targeting remains unrealized. In this article, we review the mechanisms and methods used for brain targeting via the intranasal (IN) route as well as the potential advantages of improving this type of delivery. We extensively review experimental studies relevant to intranasal delivery of therapeutic agents for the treatment of psychosis and mental illnesses. We also review clinical studies in which intranasal delivery of peptides, like oxytocin (7 studies) and desmopressin (1), were used as an adjuvant to antipsychotic treatment with promising results. Experimental animal studies (17) investigating intranasal delivery of mainstream antipsychotic drugs have revealed successful targeting to the brain as suggested by pharmacokinetic parameters and behavioral effects. To improve delivery to the brain, nanotechnology-based carriers like nanoparticles and nanoemulsions have been used in several studies. However, human studies assessing intranasal delivery of mainstream antipsychotic drugs are lacking, and the potential toxicity of nanoformulations used in animal studies has not been explored. A brief discussion of future directions anticipates that if limitations of low aqueous solubility of antipsychotic drugs can be overcome and non-toxic formulations used, IN delivery (particularly targeting specific tissues within the brain) will gain more importance moving forward given the inherent benefits of IN delivery in comparison to other methods.

  10. Nanoencapsulation for drug delivery

    PubMed Central

    Kumari, Avnesh; Singla, Rubbel; Guliani, Anika; Yadav, Sudesh Kumar

    2014-01-01

    Nanoencapsulation of drug/small molecules in nanocarriers (NCs) is a very promising approach for development of nanomedicine. Modern drug encapsulation methods allow efficient loading of drug molecules inside the NCs thereby reducing systemic toxicity associated with drugs. Targeting of NCs can enhance the accumulation of nanonencapsulated drug at the diseased site. This article focussed on the synthesis methods, drug loading, drug release mechanism and cellular response of nanoencapsulated drugs on liposomes, micelles, carbon nanotubes, dendrimers, and magnetic NCs. Also the uses of these various NCs have been highlighted in the field of nanotechnology. PMID:26417260

  11. Photoresponsive nanoparticles for drug delivery

    PubMed Central

    Rwei, Alina Y.; Wang, Weiping; Kohane, Daniel S.

    2015-01-01

    Summary Externally triggerable drug delivery systems provide a strategy for the delivery of therapeutic agents preferentially to a target site, presenting the ability to enhance therapeutic efficacy while reducing side effects. Light is a versatile and easily tuned external stimulus that can provide spatiotemporal control. Here we will review the use of nanoparticles in which light triggers drug release or induces particle binding to tissues (phototargeting). PMID:26644797

  12. Drug Delivery Systems for Platinum Drugs

    NASA Astrophysics Data System (ADS)

    Huynh, Vien T.; Scarano, Wei; Stenzel, Martina H.

    2013-09-01

    Since the discovery of cisplatin, drugs based on platinum, have made a significant impact on the treatment of various cancers. The administration of platinum drugs is however accompanied by significant side effects. This chapter discusses the types of drug delivery systems that have been developed in order to enable the targeted delivery while maintaining controlled temporal supply of the drug. The sizes of carriers range from nanometer to micrometer sized particles. The most common types of drug carriers are micelles, liposomes, nanoparticles, and dendrimers, but also a few microspheres have been developed. Most striking aspect of the delivery of platinum drugs is the possibility of physical encapsulation but also the binding of the drug to the polymer carrier coordinate covalent bond. Since platinum drugs have typically two permanent and two leaving ligands, the polymer can be part of either ligand. As the leaving ligand, the platinum drug is released often as cisplatin. If the polymer provides the functionality for the permanent ligand, a new macromolecular drug has been formed. In addition to the attachment of pt(II) drugs, recent offorts are devoted to the conjugation via the Pt((IV) prodrug.

  13. Electroresponsive nanoparticles for drug delivery on demand

    NASA Astrophysics Data System (ADS)

    Samanta, Devleena; Hosseini-Nassab, Niloufar; Zare, Richard N.

    2016-04-01

    The potential of electroresponsive conducting polymer nanoparticles to be used as general drug delivery systems that allow electrically pulsed, linearly scalable, and on demand release of incorporated drugs is demonstrated. As examples, facile release from polypyrrole nanoparticles is shown for fluorescein, a highly water-soluble model compound, piroxicam, a lipophilic small molecule drug, and insulin, a large hydrophilic peptide hormone. The drug loading is about 13 wt% and release is accomplished in a few seconds by applying a weak constant current or voltage. To identify the parameters that should be finely tuned to tailor the carrier system for the release of the therapeutic molecule of interest, a systematic study of the factors that affect drug delivery is performed, using fluorescein as a model compound. The parameters studied include current, time, voltage, pH, temperature, particle concentration, and ionic strength. Results indicate that there are several degrees of freedom that can be optimized for efficient drug delivery. The ability to modulate linearly drug release from conducting polymers with the applied stimulus can be utilized to design programmable and minimally invasive drug delivery devices.

  14. Phototriggered multifunctional drug delivery device

    NASA Astrophysics Data System (ADS)

    Härtner, S.; Kim, H.-C.; Hampp, N.

    2006-02-01

    Although phototriggered cleavage of chemical bonds induced by single-photon or two-photon-absorption provides attractive tools for controlled drug delivery, the choice of drugs is still limited by the linker system to which the therapeutic molecules need to be bound covalently. The use of a multifunctional linker system suitable for coupling a broad spectrum of drugs to the polymeric carrier will open a new field for drug delivery. We have developed a novel photocleavable multifunctional linker system based on coumarin dimers, whose unique photochemical behavior are well characterized. As a first example, an acrylic polymer-drug conjugate with antimetabolites is explored. The cleavage of the link between the drug and the polymer backbone is triggered by both single- as well as two-photon absorption. The release of the drug is investigated. It is possible to manufacture a polymeric drug delivery device with several drugs in different areas. In particular the two-photon-absorption induced process offers the possibility to address the drug of interest owing to the superior spatial resolution. The key to such devices is a versatile linker-system which can be adopted to work with various drug compounds.

  15. Design, Development, and Optimization of Sterculia Gum-Based Tablet Coated with Chitosan/Eudragit RLPO Mixed Blend Polymers for Possible Colonic Drug Delivery.

    PubMed

    Nath, Bipul; Nath, Lila Kanta

    2013-01-01

    The purpose of this study is to explore the possible applicability of Sterculia urens gum as a novel carrier for colonic delivery system of a sparingly soluble drug, azathioprine. The study involves designing a microflora triggered colon-targeted drug delivery system (MCDDS) which consists of a central polysaccharide core and is coated to different film thicknesses with blends of chitosan/Eudragit RLPO, and is overcoated with Eudragit L00 to provide acid and intestinal resistance. The microflora degradation property of gum was investigated in rat caecal medium. Drug release study in simulated colonic fluid revealed that swelling force of the gum could concurrently drive the drug out of the polysaccharide core due to the rupture of the chitosan/Eudargit coating in microflora-activated environment. Chitosan in the mixed film coat was found to be degraded by enzymatic action of the microflora in the colon. Release kinetic data revealed that the optimized MCDDS was fitted well into first-order model, and apparent lag time was found to be 6 hours, followed by Higuchi release kinetics. In vivo study in rabbits shows delayed T max, prolonged absorption time, decreased C max, and absorption rate constant (Ka), indicating a reduced systemic toxicity of the drug as compared to other dosage forms.

  16. Design, Development, and Optimization of Sterculia Gum-Based Tablet Coated with Chitosan/Eudragit RLPO Mixed Blend Polymers for Possible Colonic Drug Delivery

    PubMed Central

    Nath, Bipul; Nath, Lila Kanta

    2013-01-01

    The purpose of this study is to explore the possible applicability of Sterculia urens gum as a novel carrier for colonic delivery system of a sparingly soluble drug, azathioprine. The study involves designing a microflora triggered colon-targeted drug delivery system (MCDDS) which consists of a central polysaccharide core and is coated to different film thicknesses with blends of chitosan/Eudragit RLPO, and is overcoated with Eudragit L00 to provide acid and intestinal resistance. The microflora degradation property of gum was investigated in rat caecal medium. Drug release study in simulated colonic fluid revealed that swelling force of the gum could concurrently drive the drug out of the polysaccharide core due to the rupture of the chitosan/Eudargit coating in microflora-activated environment. Chitosan in the mixed film coat was found to be degraded by enzymatic action of the microflora in the colon. Release kinetic data revealed that the optimized MCDDS was fitted well into first-order model, and apparent lag time was found to be 6 hours, followed by Higuchi release kinetics. In vivo study in rabbits shows delayed Tmax, prolonged absorption time, decreased Cmax, and absorption rate constant (Ka), indicating a reduced systemic toxicity of the drug as compared to other dosage forms. PMID:26555985

  17. Implantable drug-delivery systems.

    PubMed

    Blackshear, P J

    1979-12-01

    Implantable drug-delivery systems are being developed to release drugs to the bloodstream continuously as well as free patients from being hospitalized to receive intravenous infusions or frequent injections. One technique is implantation of a pellet in the subcutaneous tissue so the pellet may be released by erosion. Drugs are also diffused through silicone rubber capsules but only polyacrylamide is able to release large molecules. Contraceptive rings containing progesterone and placed in the uterus or vagina and implanted silicone-rubber capsules use these principles. Disadvantages to the subcutaneous delivery of drugs include: 1) release of the drug in subcutaneous tissue rather than in the bloodstream directly; 2) entry into the circulatory system is controlled by surrounding blood supplies which vary with fat; 3) diffusion may be difficult due to dense layers of fibrous tissue; and 4) drug amounts cannot be readily regulated. The Ommaya reservoir uses a container with a self-sealing membrane implanted in the scalp and connected to a cerebral ventricle to treat forms of leukemia and fungal meningitis. Another development is an implantable disk-shaped infusion pump with 2 compartments, the outer one containing a propellant and the inner chamber containing the drug, holds 45 milliliters and releases about 1 milliliter/day. In the future these systems may release drugs in response to biochemical feedback or deliver a drug to 1 specific area.

  18. Nanoparticles for Brain Drug Delivery

    PubMed Central

    Masserini, Massimo

    2013-01-01

    The central nervous system, one of the most delicate microenvironments of the body, is protected by the blood-brain barrier (BBB) regulating its homeostasis. BBB is a highly complex structure that tightly regulates the movement of ions of a limited number of small molecules and of an even more restricted number of macromolecules from the blood to the brain, protecting it from injuries and diseases. However, the BBB also significantly precludes the delivery of drugs to the brain, thus, preventing the therapy of a number of neurological disorders. As a consequence, several strategies are currently being sought after to enhance the delivery of drugs across the BBB. Within this review, the recently born strategy of brain drug delivery based on the use of nanoparticles, multifunctional drug delivery systems with size in the order of one-billionth of meters, is described. The review also includes a brief description of the structural and physiological features of the barrier and of the most utilized nanoparticles for medical use. Finally, the potential neurotoxicity of nanoparticles is discussed, and future technological approaches are described. The strong efforts to allow the translation from preclinical to concrete clinical applications are worth the economic investments. PMID:25937958

  19. Formulation, optimization and evaluation of curcumin-β-cyclodextrin-loaded sponge for effective drug delivery in thermal burns chemotherapy.

    PubMed

    Kaur, Navdeep; Garg, Tarun; Goyal, Amit K; Rath, Goutam

    2016-09-01

    The present study was designed to determine the role of curcumin-β-cyclodextrin-loaded sponge on burn wound healing in rats. Curcumin-β-cyclodextrin complex was prepared by the solvent evaporation encapsulation method. Molecular inclusion complex of curcumin-β-cyclodextrin was incorporated into gelatin sponge. The developed sponge was characterized for drug entrapment, drug release and morphology. The biological activity of optimized formulation was determined on burn wounds which were made on rats. The burn wound healing efficacy was analyzed through physical and histological changes observed at the wound sites. There was a significant decrease in rate of wound contraction in experimental groups then the control group. Curcumin-β-cyclodextrin-loaded sponge treated wound was found to heal in rate comparable to marketed formulation with no sign of adverse consequence. The result clearly substantiates the beneficial effects of curcumin-β-cyclodextrin-loaded sponge in the acceleration of wound healing.

  20. Novel mucoadhesion tests for polymers and polymer-coated particles to design optimal mucoadhesive drug delivery systems.

    PubMed

    Takeuchi, Hirofumi; Thongborisute, Jringjai; Matsui, Yuji; Sugihara, Hikaru; Yamamoto, Hiromitsu; Kawashima, Yoshiaki

    2005-11-03

    To design an effective particulate drug delivery system having mucoadhesive function, several mucoadhesion tests for polymers and the resultant particulate systems were developed. Mucin particle method is a simple mucoadhesion test for polymers, in which the commercial mucin particles are used. By measuring the change in particle size or zeta potential of the mucin particle in a certain concentration of polymer solution, we could estimate the extent of their mucoadhesive property. BIACORE method is also a novel mucoadhesion test for polymers. On passing through the mucin suspension on the polymer-immobilized chip of BIACORE instrument, the interaction was quantitatively evaluated with the change in its response diagram. By using these mucoadhesion tests, we detected a strong mucoadhesive property of several types of chitosan and Carbopol. Evaluation of mucoadhesive property of polymer-coated particulate systems was demonstrated with the particle counting method developed by us. To detect the mucoadhesive phenomena in the intestinal tract, we observed the rat intestine with the confocal laser scanning microscope (CLSM) after oral administration of the particulate systems. The resultant photographs clearly showed a longer retention of submicron-sized chitosan-coated liposomes (ssCS-Lip) in the intestinal tract than other liposomal particles tested such as non-coated liposomes and chitosan-coated multilamellar one. These observations explained well the superiority of the ssCS-Lip as drug carrier in oral administration of calcitonin in rats than other liposomal particles.

  1. Drug delivery by lipid cochleates.

    PubMed

    Zarif, Leila

    2005-01-01

    Drug delivery technology has brought additional benefits to pharmaceuticals such as reduction in dosing frequency and side effects, as well as the extension of patient life. To address this need, cochleates, a precipitate obtained as a result of the interaction between phosphatidylserine and calcium, have been developed and proved to have potential in encapsulating and delivering small molecule drugs. This chapter discusses the molecules that can be encapsulated in a cochleate system and describes in detail the methodology that can be used to encapsulate and characterize hydrophobic drugs such as amphotericin B, a potent antifungal agent. Some efficacy data in animal models infected with candidiasis or aspergillosis are described as well.

  2. Mucoadhesive vaginal drug delivery systems.

    PubMed

    Acartürk, Füsun

    2009-11-01

    Vaginal delivery is an important route of drug administration for both local and systemic diseases. The vaginal route has some advantages due to its large surface area, rich blood supply, avoidance of the first-pass effect, relatively high permeability to many drugs and self-insertion. The traditional commercial preparations, such as creams, foams, gels, irrigations and tablets, are known to reside in the vaginal cavity for a relatively short period of time owing to the self-cleaning action of the vaginal tract, and often require multiple daily doses to ensure the desired therapeutic effect. The vaginal route appears to be highly appropriate for bioadhesive drug delivery systems in order to retain drugs for treating largely local conditions, or for use in contraception. In particular, protection against sexually-transmitted diseases is critical. To prolong the residence time in the vaginal cavity, bioadhesive therapeutic systems have been developed in the form of semi-solid and solid dosage forms. The most commonly used mucoadhesive polymers that are capable of forming hydrogels are synthetic polyacrylates, polycarbophil, chitosan, cellulose derivatives (hydroxyethycellulose, hydroxy-propylcellulose and hydroxypropylmethylcellulose), hyaluronic acid derivatives, pectin, tragacanth, carrageenan and sodium alginate. The present article is a comprehensive review of the patents related to mucoadhesive vaginal drug delivery systems.

  3. QbD-based systematic development of novel optimized solid self-nanoemulsifying drug delivery systems (SNEDDS) of lovastatin with enhanced biopharmaceutical performance.

    PubMed

    Beg, Sarwar; Sandhu, Premjeet Singh; Batra, Rattandeep Singh; Khurana, Rajneet Kaur; Singh, Bhupinder

    2015-01-01

    Of late, solid self-nanoemulsifying drug delivery systems (S-SNEDDS) have been extensively sought-after owing to their superior portability, drug loading, stability and patient compliance. The current studies, therefore, entail systematic development, optimization and evaluation (in vitro, in situ and in vivo) of the solid formulations of (SNEDDS) lovastatin employing rational quality by design (QbD)-based approach of formulation by design (FbD). The patient-centric quality target product profile (QTPP) and critical quality attributes (CQAs) were earmarked. Preformulation studies along with initial risk assessment facilitated the selection of lipid (i.e. Capmul MCM), surfactant (i.e. Nikkol HCO-50) and co-surfactant (i.e. Lutrol F127) as CMAs for formulation of S-SNEDDS. A face-centered cubic design (FCCD) was employed for optimization using Nikkol-HCO50 (X1) and Lutrol-F127 (X2), evaluating CQAs like globule size, liquefaction time, emulsification time, MDT, dissolution efficiency and permeation parameter. The design space was generated using apt mathematical models, and the optimum formulation was located, followed by validation of the FbD methodology. In situ SPIP and in vivo pharmacodynamic studies on the optimized formulation carried out in unisex Wistar rats, corroborated superior drug absorption and enhanced pharmacodynamic potential in regulating serum lipid levels. In a nutshell, the present studies report successful QbD-oriented development of novel oral S-SNEDDS of lovastatin with distinctly improved biopharmaceutical performance.

  4. Microfabricated injectable drug delivery system

    DOEpatents

    Krulevitch, Peter A.; Wang, Amy W.

    2002-01-01

    A microfabricated, fully integrated drug delivery system capable of secreting controlled dosages of multiple drugs over long periods of time (up to a year). The device includes a long and narrow shaped implant with a sharp leading edge for implantation under the skin of a human in a manner analogous to a sliver. The implant includes: 1) one or more micromachined, integrated, zero power, high and constant pressure generating osmotic engine; 2) low power addressable one-shot shape memory polymer (SMP) valves for switching on the osmotic engine, and for opening drug outlet ports; 3) microfabricated polymer pistons for isolating the pressure source from drug-filled microchannels; 4) multiple drug/multiple dosage capacity, and 5) anisotropically-etched, atomically-sharp silicon leading edge for penetrating the skin during implantation. The device includes an externally mounted controller for controlling on-board electronics which activates the SMP microvalves, etc. of the implant.

  5. Development and optimization of polymeric self-emulsifying nanocapsules for localized drug delivery: design of experiment approach.

    PubMed

    Wadhwa, Jyoti; Asthana, Abhay; Gupta, Sumeet; Shilkari Asthana, Gyati; Singh, Ranjit

    2014-01-01

    The purpose of the present study was to formulate polymeric self-emulsifying curcumin nanocapsules with high encapsulation efficiency, good emulsification ability, and optimal globule size for localized targeting in the colon. Formulations were prepared using modified quasiemulsion solvent diffusion method. Concentration of formulation variables, namely, X1 (oil), X2 (polymeric emulsifier), and X3 (adsorbent), was optimized by design of experiments using Box-Behnken design, for its impact on mean globule size (Y1) and encapsulation efficiency (Y2) of the formulation. Polymeric nanocapsules with an average diameter of 100-180 nm and an encapsulation efficiency of 64.85±0.12% were obtained. In vitro studies revealed that formulations released the drug after 5 h lag time corresponding to the time to reach the colonic region. Pronounced localized action was inferred from the plasma concentration profile (C max 200 ng/mL) that depicts limited systemic absorption. Roentgenography study confirms the localized presence of carrier (0-2 h in upper GIT; 2-4 h in small intestine; and 4-24 h in the lower intestine). Optimized formulation showed significantly higher cytotoxicity (IC50 value 20.32 μM) in HT 29 colonic cancer cell line. The present study demonstrates systematic development of polymeric self-emulsifying nanocapsule formulation of curcumin for localized targeting in colon.

  6. Development and Optimization of Polymeric Self-Emulsifying Nanocapsules for Localized Drug Delivery: Design of Experiment Approach

    PubMed Central

    Wadhwa, Jyoti; Asthana, Abhay; Gupta, Sumeet; Shilkari Asthana, Gyati; Singh, Ranjit

    2014-01-01

    The purpose of the present study was to formulate polymeric self-emulsifying curcumin nanocapsules with high encapsulation efficiency, good emulsification ability, and optimal globule size for localized targeting in the colon. Formulations were prepared using modified quasiemulsion solvent diffusion method. Concentration of formulation variables, namely, X1 (oil), X2 (polymeric emulsifier), and X3 (adsorbent), was optimized by design of experiments using Box-Behnken design, for its impact on mean globule size (Y1) and encapsulation efficiency (Y2) of the formulation. Polymeric nanocapsules with an average diameter of 100–180 nm and an encapsulation efficiency of 64.85 ± 0.12% were obtained. In vitro studies revealed that formulations released the drug after 5 h lag time corresponding to the time to reach the colonic region. Pronounced localized action was inferred from the plasma concentration profile (Cmax 200 ng/mL) that depicts limited systemic absorption. Roentgenography study confirms the localized presence of carrier (0–2 h in upper GIT; 2–4 h in small intestine; and 4–24 h in the lower intestine). Optimized formulation showed significantly higher cytotoxicity (IC50 value 20.32 μM) in HT 29 colonic cancer cell line. The present study demonstrates systematic development of polymeric self-emulsifying nanocapsule formulation of curcumin for localized targeting in colon. PMID:25525620

  7. Protease-mediated drug delivery

    NASA Astrophysics Data System (ADS)

    Dickson, Eva F.; Goyan, Rebecca L.; Kennedy, James C.; Mackay, M.; Mendes, M. A. K.; Pottier, Roy H.

    2003-12-01

    Drugs used in disease treatment can cause damage to both malignant and normal tissue. This toxicity limits the maximum therapeutic dose. Drug targeting is of high interest to increase the therapeutic efficacy of the drug without increasing systemic toxicity. Certain tissue abnormalities, disease processes, cancers, and infections are characterized by high levels of activity of specific extracellular and/or intracellular proteases. Abnormally high activity levels of specific proteases are present at sites of physical or chemical trauma, blood clots, malignant tumors, rheumatoid arthritis, inflammatory bowel disease, gingival disease, glomerulonerphritis, and acute pancreatitis. Abnormal protease activity is suspected in development of liver thrombosis, pulmonary emphysema, atherosclerosis, and muscular dystrophy. Inactiviating disease-associated proteases by the administration of appropriate protease inhibitors has had limited success. Instead, one could use such proteases to target drugs to treat the condition. Protease mediated drug delivery offers such a possibility. Solubilizing groups are attached to insoluble drugs via a polypeptide chain which is specifically cleavable by certian proteases. When the solubilized drug enounters the protease, the solubilizing moieties are cleaved, and the drug precipitates at the disease location. Thus, a smaller systemic dosage could result in a therapeutic drug concentration at the treatment site with less systemic toxicity.

  8. Optimal control of hepatitis C antiviral treatment programme delivery for prevention amongst a population of injecting drug users.

    PubMed

    Martin, Natasha K; Pitcher, Ashley B; Vickerman, Peter; Vassall, Anna; Hickman, Matthew

    2011-01-01

    In most developed countries, HCV is primarily transmitted by injecting drug users (IDUs). HCV antiviral treatment is effective, and deemed cost-effective for those with no re-infection risk. However, few active IDUs are currently treated. Previous modelling studies have shown antiviral treatment for active IDUs could reduce HCV prevalence, and there is emerging interest in developing targeted IDU treatment programmes. However, the optimal timing and scale-up of treatment is unknown, given the real-world constraints commonly existing for health programmes. We explore how the optimal programme is affected by a variety of policy objectives, budget constraints, and prevalence settings. We develop a model of HCV transmission and treatment amongst active IDUs, determine the optimal treatment programme strategy over 10 years for two baseline chronic HCV prevalence scenarios (30% and 45%), a range of maximum annual budgets (£50,000-300,000 per 1,000 IDUs), and a variety of objectives: minimising health service costs and health utility losses; minimising prevalence at 10 years; minimising health service costs and health utility losses with a final time prevalence target; minimising health service costs with a final time prevalence target but neglecting health utility losses. The largest programme allowed for a given budget is the programme which minimises both prevalence at 10 years, and HCV health utility loss and heath service costs, with higher budgets resulting in greater cost-effectiveness (measured by cost per QALY gained compared to no treatment). However, if the objective is to achieve a 20% relative prevalence reduction at 10 years, while minimising both health service costs and losses in health utility, the optimal treatment strategy is an immediate expansion of coverage over 5-8 years, and is less cost-effective. By contrast, if the objective is only to minimise costs to the health service while attaining the 20% prevalence reduction, the programme is deferred

  9. Food, physiology and drug delivery.

    PubMed

    Varum, F J O; Hatton, G B; Basit, A W

    2013-12-05

    Gastrointestinal physiology is dynamic and complex at the best of times, and a multitude of known variables can affect the overall bioavailability of drugs delivered via the oral route. Yet while the influences of food and beverage intake as just two of these variables on oral drug delivery have been extensively documented in the wider literature, specific information on their effects remains sporadic, and is not so much contextually reviewed. Food co-ingestion with oral dosage forms can mediate several changes to drug bioavailability, yet the precise mechanisms underlying this have yet to be fully elucidated. Likewise, the often detrimental effects of alcohol (ethanol) on dosage form performance have been widely observed experimentally, but knowledge of which has only moderately impacted on clinical practice. Here, we attempt to piece together the available subject matter relating to the influences of both solid and liquid foodstuffs on the gastrointestinal milieu and the implications for oral drug delivery, with particular emphasis on the behaviour of modified-release dosage forms, formulation robustness and drug absorption. Providing better insight into these influences, and exemplifying cases where formulations have been developed or modified to circumvent their associated problems, can help to appropriately direct the design of future in vitro digestive modelling systems as well as oral dosage forms resilient to these effects. Moreover, this will help to better our understanding of the impact of food and alcohol intake on normal gut behaviour and function.

  10. Optimal Control of Hepatitis C Antiviral Treatment Programme Delivery for Prevention amongst a Population of Injecting Drug Users

    PubMed Central

    Vickerman, Peter; Vassall, Anna; Hickman, Matthew

    2011-01-01

    In most developed countries, HCV is primarily transmitted by injecting drug users (IDUs). HCV antiviral treatment is effective, and deemed cost-effective for those with no re-infection risk. However, few active IDUs are currently treated. Previous modelling studies have shown antiviral treatment for active IDUs could reduce HCV prevalence, and there is emerging interest in developing targeted IDU treatment programmes. However, the optimal timing and scale-up of treatment is unknown, given the real-world constraints commonly existing for health programmes. We explore how the optimal programme is affected by a variety of policy objectives, budget constraints, and prevalence settings. We develop a model of HCV transmission and treatment amongst active IDUs, determine the optimal treatment programme strategy over 10 years for two baseline chronic HCV prevalence scenarios (30% and 45%), a range of maximum annual budgets (50,000–300,000 per 1,000 IDUs), and a variety of objectives: minimising health service costs and health utility losses; minimising prevalence at 10 years; minimising health service costs and health utility losses with a final time prevalence target; minimising health service costs with a final time prevalence target but neglecting health utility losses. The largest programme allowed for a given budget is the programme which minimises both prevalence at 10 years, and HCV health utility loss and heath service costs, with higher budgets resulting in greater cost-effectiveness (measured by cost per QALY gained compared to no treatment). However, if the objective is to achieve a 20% relative prevalence reduction at 10 years, while minimising both health service costs and losses in health utility, the optimal treatment strategy is an immediate expansion of coverage over 5–8 years, and is less cost-effective. By contrast, if the objective is only to minimise costs to the health service while attaining the 20% prevalence reduction, the programme is deferred

  11. Superhydrophobic materials for drug delivery

    NASA Astrophysics Data System (ADS)

    Yohe, Stefan Thomas

    Superhydrophobicity is a property of material surfaces reflecting the ability to maintain air at the solid-liquid interface when in contact with water. These surfaces have characteristically high apparent contact angles, by definition exceeding 150°, as a result of the composite material-air surface formed under an applied water droplet. Superhydrophobic surfaces were first discovered on naturally occurring substrates, and have subsequently been fabricated in the last several decades to harness these favorable surface properties for a number of emerging applications, including their use in biomedical settings. This work describes fabrication and characterization of superhydrophobic 3D materials, as well as their use as drug delivery devices. Superhydrophobic 3D materials are distinct from 2D superhydrophobic surfaces in that air is maintained not just at the surface of the material, but also within the bulk. When the superhydrophobic 3D materials are submerged in water, water infiltrates slowly and continuously as a new water-air-material interface is formed with controlled displacement of air. Electrospinning and electrospraying are used to fabricate superhydrophobic 3D materials utilizing blends of the biocompatible polymers poly(epsilon-caprolactone) and poly(caprolactone-co-glycerol monostearate) (PGC-C18). PGC-C18 is significantly more hydrophobic than PCL (contact angle of 116° versus 83° for flat materials), and further additions of PGC-C18 into electrospun meshes and electrosprayed coatings affords increased stability of the entrapped air layer. For example, PCL meshes alone (500 mum thick) take 10 days to fully wet, and with 10% or 30% PGC-C18 addition wetting rates are dramatically slowed to 60% wetted by 77 days and 4% by 75 days, respectively. Stability of the superhydrophobic materials can be further probed with a variety of physio-chemical techniques, including pressure, surfactant containing solutions, and solvents of varying surface tension

  12. Thermosensitive polymers for drug delivery

    SciTech Connect

    Gutowska, A.; Kim, Sung Wan

    1996-12-31

    Thermosensitive polymers (TSP) demonstrating temperature-dependent temperature-dependent swelling in water have been extensively studied in recent years. Their molecular and physical properties have been tailored for a variety of biomedical and engineering uses. This presentation will discuss TSP based on poly(N-isopropylacrylamide) and its crosslinked networks modified with hydrophobic or hydrophilic components by copolymerization blending and formation of interpenetrating polymer networks (IPNs). TSP designed for three different areas of drug delivery will be presented. First, heparin releasing temperature-sensitive polymers for the prevention of surface induced thrombosis will be presented as an example of a local macromolecular delivery from a surface of a medical device. Second, a new oral delivery device based on a novel mechanical squeezing concept, utilizing specific swelling-deswelling characteristics of temperature- and temperature/pH-sensitive hydrogels will be described. These hydrogels were synthesized to exhibit a controlled swelling-deswelling kinetics, hence a variety of release profiles may be generated: a delayed, a zero-order or an {open_quotes}on-off{close_quotes} release profile. Finally, thermally reversible polymeric gels as an extracellular matrix for the entrapment of pancreatic islet cells in biohybrid artificial pancreas for insulin delivery will be discussed.

  13. Microspheres and Nanotechnology for Drug Delivery.

    PubMed

    Jóhannesson, Gauti; Stefánsson, Einar; Loftsson, Thorsteinn

    2016-01-01

    Ocular drug delivery to the posterior segment of the eye can be accomplished by invasive drug injections into different tissues of the eye and noninvasive topical treatment. Invasive treatment involves the risks of surgical trauma and infection, and conventional topical treatments are ineffective in delivering drugs to the posterior segment of the eye. In recent years, nanotechnology has become an ever-increasing part of ocular drug delivery. In the following, we briefly review microspheres and nanotechnology for drug delivery to the eye, including different forms of nanotechnology such as nanoparticles, microparticles, liposomes, microemulsions and micromachines. The permeation barriers and anatomical considerations linked to ocular drug delivery are discussed and a theoretical overview on drug delivery through biological membranes is given. Finally, in vitro, in vivo and human studies of x03B3;-cyclodextrin nanoparticle eyedrop suspensions are discussed as an example of nanotechnology used for drug delivery to the eye.

  14. Drug delivery systems from nose to brain.

    PubMed

    Misra, Ambikanandan; Kher, Gitanjali

    2012-09-01

    The treatment of brain disorders is particularly challenging due to the presence of a variety of formidable obstacles to deliver drugs selectively and effectively to the brain. Blood-brain-barrier (BBB) constitutes the major obstacle to the uptake of drugs into the brain following systemic administration. Intranasal delivery offers a non-invasive and convenient method to bypass the BBB and delivery of therapeutics directly to the brain. The review discusses the potential of intranasal route to deliver drugs to the brain, the mechanisms and pathways of direct nose to brain drug transport, the various factors influencing transnasal drug absorption, the conventional and novel intranasal drug delivery systems, the various intranasal drug delivery techniques and devices, and examples of brain drug transport that have been feasible in treating various brain disorders. Moreover, products on the market, investigational drugs, and the author's perceptions about the prospect of intranasal delivery for treating brain disorders are also been discussed.

  15. Ocular drug delivery systems: An overview

    PubMed Central

    Patel, Ashaben; Cholkar, Kishore; Agrahari, Vibhuti; Mitra, Ashim K

    2014-01-01

    The major challenge faced by today’s pharmacologist and formulation scientist is ocular drug delivery. Topical eye drop is the most convenient and patient compliant route of drug administration, especially for the treatment of anterior segment diseases. Delivery of drugs to the targeted ocular tissues is restricted by various precorneal, dynamic and static ocular barriers. Also, therapeutic drug levels are not maintained for longer duration in target tissues. In the past two decades, ocular drug delivery research acceleratedly advanced towards developing a novel, safe and patient compliant formulation and drug delivery devices/techniques, which may surpass these barriers and maintain drug levels in tissues. Anterior segment drug delivery advances are witnessed by modulation of conventional topical solutions with permeation and viscosity enhancers. Also, it includes development of conventional topical formulations such as suspensions, emulsions and ointments. Various nanoformulations have also been introduced for anterior segment ocular drug delivery. On the other hand, for posterior ocular delivery, research has been immensely focused towards development of drug releasing devices and nanoformulations for treating chronic vitreoretinal diseases. These novel devices and/or formulations may help to surpass ocular barriers and associated side effects with conventional topical drops. Also, these novel devices and/or formulations are easy to formulate, no/negligibly irritating, possess high precorneal residence time, sustain the drug release, and enhance ocular bioavailability of therapeutics. An update of current research advancement in ocular drug delivery necessitates and helps drug delivery scientists to modulate their think process and develop novel and safe drug delivery strategies. Current review intends to summarize the existing conventional formulations for ocular delivery and their advancements followed by current nanotechnology based formulation developments

  16. Trojan Microparticles for Drug Delivery

    PubMed Central

    Anton, Nicolas; Jakhmola, Anshuman; Vandamme, Thierry F.

    2012-01-01

    During the last decade, the US Food and Drug Administration (FDA) have regulated a wide range of products, (foods, cosmetics, drugs, devices, veterinary, and tobacco) which may utilize micro and nanotechnology or contain nanomaterials. Nanotechnology allows scientists to create, explore, and manipulate materials in nano-regime. Such materials have chemical, physical, and biological properties that are quite different from their bulk counterparts. For pharmaceutical applications and in order to improve their administration (oral, pulmonary and dermal), the nanocarriers can be spread into microparticles. These supramolecular associations can also modulate the kinetic releases of drugs entrapped in the nanoparticles. Different strategies to produce these hybrid particles and to optimize the release kinetics of encapsulated drugs are discussed in this review. PMID:24300177

  17. Integrated microsystems for controlled drug delivery.

    PubMed

    Razzacki, S Zafar; Thwar, Prasanna K; Yang, Ming; Ugaz, Victor M; Burns, Mark A

    2004-02-10

    Efficient drug delivery and administration are needed to realize the full potential of molecular therapeutics. Integrated microsystems that incorporate extremely fast sensory and actuation capabilities can fulfill this need for efficient drug delivery tools. Photolithographic technologies borrowed from the semiconductor industry enable mass production of such microsystems. Rapid prototyping allows for the quick development of customized devices that would accommodate for diverse therapeutic requirements. This paper reviews the capabilities of existing microfabrication and their applications in controlled drug delivery microsystems. The next generation of drug delivery systems--fully integrated and self-regulating--would not only improve drug administration, but also revolutionize the health-care industry.

  18. Colloidal drug delivery systems in vaccine delivery.

    PubMed

    Beg, Sarwar; Samad, Abdus; Nazish, Iram; Sultana, Ruksar; Rahman, Mahfoozur; Ahmad, Md Zaki; Akbar, Md

    2013-01-01

    Vaccines play a vital role in the field of community medicine to combat against several diseases of human existence. Vaccines primarily trigger the acquired immune system to develop long-lasting immunity against pathogens. Conventional approaches for vaccine delivery lacks potential to target a particular antigen to develop acquired immunity by specific antibodies. Recent advancements in vaccine delivery showed that inclusion of adjuvants in vaccine formulations or delivery of them in a carrier helps in achieving desired targeting ability, reducing the immunogenicity and significant augmentation in the immune response. Colloidal carriers (liposomes, niosomes, microspheres, proteosomes, virosomes and virus like particles (VLPs), antigen cochleates, dendrimers and carbon nanotubes) have been widely explored for vaccine delivery. Further, surface engineering of these carriers with ligands, functional moieties and monoclonal antibodies tend to enhance the immune recognition potential of vaccines by differentiation of antigen specific memory T-cells. The current review, therefore, provides an updated account on the recent advancements in various colloidal delivery systems in vaccine delivery, outlining the mechanism of immune response initiated by them along with potential applications and marketed instances in an explicit manner.

  19. NanoART, neuroAIDS and CNS drug delivery

    PubMed Central

    Nowacek, Ari; Gendelman, Howard E

    2009-01-01

    A broad range of nanomedicines is being developed to improve drug delivery for CNS disorders. The structure of the blood–brain barrier (BBB), the presence of efflux pumps and the expression of metabolic enzymes pose hurdles for drug-brain entry. Nanoformulations can circumvent the BBB to improve CNS-directed drug delivery by affecting such pumps and enzymes. Alternatively, they can be optimized to affect their size, shape, and protein and lipid coatings to facilitate drug uptake, release and ingress across the barrier. This is important as the brain is a sanctuary for a broad range of pathogens including HIV-1. Improved drug delivery to the CNS would affect pharmacokinetic and drug biodistribution properties. This article focuses on how nanotechnology can serve to improve the delivery of antiretroviral medicines, termed nanoART, across the BBB and affect the biodistribution and clinical benefit for HIV-1 disease. PMID:19572821

  20. Ungual and transungual drug delivery.

    PubMed

    Shivakumar, H N; Juluri, Abhishek; Desai, B G; Murthy, S Narasimha

    2012-08-01

    Topical therapy is desirable in treatment of nail diseases like onychomycosis (fungal infection of nail) and psoriasis. The topical treatment avoids the adverse effects associated with systemic therapy, thereby enhancing the patient compliance and reducing the treatment cost. However the effectiveness of the topical therapies has been limited due to the poor permeability of the nail plate to topically applied therapeutic agents. Research over the past one decade has been focused on improving the transungual permeability by means of chemical treatment, penetration enhancers, mechanical and physical methods. The present review is an attempt to discuss the different physical and chemical methods employed to increase the permeability of the nail plate. Minimally invasive electrically mediated techniques such as iontophoresis have gained success in facilitating the transungual delivery of actives. In addition drug transport across the nail plate has been improved by filing the dorsal surface of the nail plate prior to application of topical formulation. But attempts to improve the trans-nail permeation using transdermal chemical enhancers have failed so far. Attempts are on to search suitable physical enhancement techniques and chemical transungual enhancers in view to maximize the drug delivery across the nail plate.

  1. Polymeric conjugates for drug delivery

    PubMed Central

    Larson, Nate; Ghandehari, Hamidreza

    2012-01-01

    The field of polymer therapeutics has evolved over the past decade and has resulted in the development of polymer-drug conjugates with a wide variety of architectures and chemical properties. Whereas traditional non-degradable polymeric carriers such as poly(ethylene glycol) (PEG) and N-(2-hydroxypropyl methacrylamide) (HPMA) copolymers have been translated to use in the clinic, functionalized polymer-drug conjugates are increasingly being utilized to obtain biodegradable, stimuli-sensitive, and targeted systems in an attempt to further enhance localized drug delivery and ease of elimination. In addition, the study of conjugates bearing both therapeutic and diagnostic agents has resulted in multifunctional carriers with the potential to both “see and treat” patients. In this paper, the rational design of polymer-drug conjugates will be discussed followed by a review of different classes of conjugates currently under investigation. The design and chemistry used for the synthesis of various conjugates will be presented with additional comments on their potential applications and current developmental status. PMID:22707853

  2. Potential of nanoparticulate drug delivery systems by intranasal administration.

    PubMed

    Ali, Javed; Ali, Mushir; Baboota, Sanjula; Sahani, Jasjeet Kaur; Ramassamy, Charles; Dao, Lé; Bhavna

    2010-05-01

    Due to number of problems related with oral, parenteral, rectal and other routes of drug administration, the interest of pharmaceutical scientists has increased towards exploring the possibilities of intranasal delivery of various drugs. Nasal drug delivery system is commonly known for the treatment of local ailments like cold, cough, rhinitis, etc. Efforts have been made to deliver various drugs, especially peptides and proteins, through nasal route for systemic use; utilizing the principles and concepts of various nanoparticulate drug delivery systems using various polymers and absorption promoters. The incorporation of drugs into nanoparticles might be a promising approach, since colloidal formulations have been shown to protect them from the degrading milieu in the nasal cavity and facilitate their transport across the mucosal barriers. The use of nanoparticles for vaccine delivery provides beneficial effect, by achieving good immune responses. This could be due to the fact that small particles can be transported preferentially by the lymphoid tissue of the nasal cavity (NALT). The brain gets benefited through the intranasal delivery as direct olfactory transport bypasses the blood brain barrier and nanoparticles are taken up and conveyed along cell processes of olfactory neurons through the cribriform plate to synaptic junctions with neurons of the olfactory bulb. The intranasal delivery is aimed at optimizing drug bioavailability for systemic drugs, as absorption decreases with increasing molecular weight, and for drugs, which are susceptible to enzymatic degradation such as proteins and polypeptides. This review discusses the potential benefits of using nanoparticles for nasal delivery of drugs and vaccines for brain, systemic and topical delivery. The article aims at giving an insight into nasal cavity, consideration of factors affecting and strategies to improve drug absorption through nasal route, pharmaceutical dosage forms and delivery systems with

  3. An optimized gastroretentive nanosystem for the delivery of levodopa.

    PubMed

    Ngwuluka, Ndidi C; Choonara, Yahya E; Kumar, Pradeep; du Toit, Lisa C; Modi, Girish; Pillay, Viness

    2015-10-15

    Characterization of the physicochemical and physicomechanical properties as well as biopharmaceutical suitability of a drug delivery system is needful in optimization of the formulation and manufacturing processes in order to achieve the desired responses. Interpolymeric blend (IPB) nano-enabled gastroretentive levodopa-loaded drug delivery systems were formulated, optimized and characterized using techniques such as spectroscopy, calorimetry, density, textural analysis, morphological analysis, porosity analysis and magnetic resonance imaging. The in vitro drug release of the delivery systems was compared to those of the conventional dosage forms and in vivo absorption was predicted. The average densities were 1.41 mg/mm(3) and 1.56 mg/mm(3) for the two formulations; rigidities were 75.05 N/mm and 84.93 N/mm; and 92% of the pores of the IPB drug delivery system were mesoporous. MR imaging displayed the swollen front at pH 1.5 and the eroded front at pH 4.5. In comparisons to the conventional dosage forms, the IPB nano-enabled gastroretentive levodopa-loaded drug delivery systems exhibited drug release over a prolonged period of time and levodopa-loaded IPB matrices were the best fit for zero-order release. Indeed the analyses of IPB nano-enabled gastroretentive levodopa-loaded drug delivery systems indicate that they hold promise as sustained delivery system for management of Parkinson's disease.

  4. Intelligent hydrogels for drug delivery system.

    PubMed

    He, Liumin; Zuo, Qinhua; Xie, Shasha; Huang, Yuexin; Xue, Wei

    2011-09-01

    Intelligent hydrogel, also known as smart hydrogels, are materials with great potential for development in drug delivery system. Intelligent hydrogel also has the ability to perceive as a signal structure change and stimulation. The review introduces the temperature-, pH-, electric signal-, biochemical molecule-, light- and pressure- sensitive hydrogels. Finally, we described the application of intelligent hydrogel in drug delivery system and the recent patents involved for hydrogel in drug delivery.

  5. Drug Delivery for Peripheral Nerve Regeneration

    DTIC Science & Technology

    2015-11-01

    hydrogels. The shortcomings of current devices in terms of burst effect , nonuniform dosage, and uneven drug delivery, necessitates a new approach to...Specific Aim 2 -- To evaluate the effectiveness of the conduit- drug delivery device to enhance nerve regeneration across a 15mm nerve gap in a rat sciatic...main tasks of Aim 1. Specific Aim 2 -- To evaluate the effectiveness of the conduit- drug delivery device to enhance nerve regeneration across a

  6. Novel central nervous system drug delivery systems.

    PubMed

    Stockwell, Jocelyn; Abdi, Nabiha; Lu, Xiaofan; Maheshwari, Oshin; Taghibiglou, Changiz

    2014-05-01

    For decades, biomedical and pharmaceutical researchers have worked to devise new and more effective therapeutics to treat diseases affecting the central nervous system. The blood-brain barrier effectively protects the brain, but poses a profound challenge to drug delivery across this barrier. Many traditional drugs cannot cross the blood-brain barrier in appreciable concentrations, with less than 1% of most drugs reaching the central nervous system, leading to a lack of available treatments for many central nervous system diseases, such as stroke, neurodegenerative disorders, and brain tumors. Due to the ineffective nature of most treatments for central nervous system disorders, the development of novel drug delivery systems is an area of great interest and active research. Multiple novel strategies show promise for effective central nervous system drug delivery, giving potential for more effective and safer therapies in the future. This review outlines several novel drug delivery techniques, including intranasal drug delivery, nanoparticles, drug modifications, convection-enhanced infusion, and ultrasound-mediated drug delivery. It also assesses possible clinical applications, limitations, and examples of current clinical and preclinical research for each of these drug delivery approaches. Improved central nervous system drug delivery is extremely important and will allow for improved treatment of central nervous system diseases, causing improved therapies for those who are affected by central nervous system diseases.

  7. Magnetic Resonance-Guided Drug Delivery.

    PubMed

    Mikhail, Andrew S; Partanen, Ari; Yarmolenko, Pavel; Venkatesan, Aradhana M; Wood, Bradford J

    2015-11-01

    The use of clinical imaging modalities for the guidance of targeted drug delivery systems, known as image-guided drug delivery (IGDD), has emerged as a promising strategy for enhancing antitumor efficacy. MR imaging is particularly well suited for IGDD applications because of its ability to acquire images and quantitative measurements with high spatiotemporal resolution. The goal of IGDD strategies is to improve treatment outcomes by facilitating planning, real-time guidance, and personalization of pharmacologic interventions. This article reviews basic principles of targeted drug delivery and highlights the current status, emerging applications, and future paradigms of MR-guided drug delivery.

  8. Breathable Medicine: Pulmonary Mode of Drug Delivery.

    PubMed

    Gandhimathi, Chinnasamy; Venugopal, Jayarama Reddy; Sundarrajan, Subramanian; Sridhar, Radhakrishnan; Tay, Samuel Sam Wah; Ramakrishna, Seeram; Kumar, Srinivasan Dinesh

    2015-04-01

    Pharmaceutically active compounds require different modes of drug delivery systems to accomplish therapeutic activity without loss of its activity and lead to exhibit no adverse effects. Originating from ancient days, pulmonary mode of drug delivery is gaining much importance compared to other modes of drug delivery systems with respect to specific diseases. Pulmonary drug delivery is a non-invasive route for local and systemic therapies together with more patient convenience, compliance and is a needleless system. In this review, we addressed the vaccine delivery via non- or minimally invasive routes. Polymeric nanoparticles are preferred for use in the pulmonary delivery devices owing to a prolonged retention in lungs. Small site for absorption, mucociliary clearance, short residence time and low bioavailability are some of the limitations in pulmonary drug delivery have been resolved by generating micro- and nano-sized aerosol particles. We have classified the breathable medicine on the basis of available devices for inhalation and also prominent diseases treated through pulmonary mode of drug delivery. Owing to increasing toxicity of pharmacological drugs, the use of natural medicines has been rapidly gaining importance recently. The review article describes breathability of medicines or the pulmonary mode of drug delivery system and their drug release profile, absorption, distribution and efficacy to cure asthma and diabetes.

  9. Drug Delivery to the Ischemic Brain

    PubMed Central

    Thompson, Brandon J.; Ronaldson, Patrick T.

    2014-01-01

    Cerebral ischemia occurs when blood flow to the brain is insufficient to meet metabolic demand. This can result from cerebral artery occlusion that interrupts blood flow, limits CNS supply of oxygen and glucose, and causes an infarction/ischemic stroke. Ischemia initiates a cascade of molecular events inneurons and cerebrovascular endothelial cells including energy depletion, dissipation of ion gradients, calcium overload, excitotoxicity, oxidative stress, and accumulation of ions and fluid. Blood-brain barrier (BBB) disruption is associated with cerebral ischemia and leads to vasogenic edema, a primary cause of stroke-associated mortality. To date, only a single drug has received US Food and Drug Administration (FDA) approval for acute ischemic stroke treatment, recombinant tissue plasminogen activator (rt-PA). While rt-PA therapy restores perfusion to ischemic brain, considerable tissue damage occurs when cerebral blood flow is re-established. Therefore, there is a critical need for novel therapeutic approaches that can “rescue” salvageable brain tissue and/or protect BBB integrity during ischemic stroke. One class of drugs that may enable neural cell rescue following cerebral ischemia/reperfusion injury is the HMG-CoA reductase inhibitors (i.e., statins). Understanding potential CNS drug delivery pathways for statins is critical to their utility in ischemic stroke. Here, we review molecular pathways associated with cerebral ischemia and novel approaches for delivering drugs to treat ischemic disease. Specifically, we discuss utility of endogenous BBB drug uptake transporters such as organic anion transporting polypeptides (OATPs/Oatps) and nanotechnology-based carriers for optimization of CNS drug delivery. Overall, this chapter highlights state-of-the-art technologies that may improve pharmacotherapy of cerebral ischemia. PMID:25307217

  10. Drug delivery systems: An updated review

    PubMed Central

    Tiwari, Gaurav; Tiwari, Ruchi; Sriwastawa, Birendra; Bhati, L; Pandey, S; Pandey, P; Bannerjee, Saurabh K

    2012-01-01

    Drug delivery is the method or process of administering a pharmaceutical compound to achieve a therapeutic effect in humans or animals. For the treatment of human diseases, nasal and pulmonary routes of drug delivery are gaining increasing importance. These routes provide promising alternatives to parenteral drug delivery particularly for peptide and protein therapeutics. For this purpose, several drug delivery systems have been formulated and are being investigated for nasal and pulmonary delivery. These include liposomes, proliposomes, microspheres, gels, prodrugs, cyclodextrins, among others. Nanoparticles composed of biodegradable polymers show assurance in fulfilling the stringent requirements placed on these delivery systems, such as ability to be transferred into an aerosol, stability against forces generated during aerosolization, biocompatibility, targeting of specific sites or cell populations in the lung, release of the drug in a predetermined manner, and degradation within an acceptable period of time. PMID:23071954

  11. Refilling drug delivery depots through the blood.

    PubMed

    Brudno, Yevgeny; Silva, Eduardo A; Kearney, Cathal J; Lewin, Sarah A; Miller, Alex; Martinick, Kathleen D; Aizenberg, Michael; Mooney, David J

    2014-09-02

    Local drug delivery depots have significant clinical utility, but there is currently no noninvasive technique to refill these systems once their payload is exhausted. Inspired by the ability of nanotherapeutics to target specific tissues, we hypothesized that blood-borne drug payloads could be modified to home to and refill hydrogel drug delivery systems. To address this possibility, hydrogels were modified with oligodeoxynucleotides (ODNs) that provide a target for drug payloads in the form of free alginate strands carrying complementary ODNs. Coupling ODNs to alginate strands led to specific binding to complementary-ODN-carrying alginate gels in vitro and to injected gels in vivo. When coupled to a drug payload, sequence-targeted refilling of a delivery depot consisting of intratumor hydrogels completely abrogated tumor growth. These results suggest a new paradigm for nanotherapeutic drug delivery, and this concept is expected to have applications in refilling drug depots in cancer therapy, wound healing, and drug-eluting vascular grafts and stents.

  12. Implantable Devices for Sustained, Intravesical Drug Delivery

    PubMed Central

    2016-01-01

    In clinical settings, intravesical instillation of a drug bolus is often performed for the treatment of bladder diseases. However, it requires repeated instillations to extend drug efficacy, which may result in poor patient compliance. To alleviate this challenge, implantable devices have been developed for the purpose of sustained, intravesical drug delivery. In this review, we briefly summarize the current trend in the development of intravesical drug-delivery devices. We also introduce the most recently developed devices with strong potential for intravesical drug-delivery applications. PMID:27377941

  13. Drug delivery by organ-specific immunoliposomes

    SciTech Connect

    Maruyama, Kazuo; Mori, Atsuhide; Hunag, Leaf . Dept. of Biochemistry); Kennel, S.J. )

    1990-01-01

    Monoclonal antibodies highly specific to the mouse pulmonary endothelial cells were conjugated to liposomes. The resulting immunoliposomes showed high levels of lung accumulation when injected intravenously into mice. Optimal target binding and retention were achieved if the lipid composition included ganglioside GM{sub 1} to reduce the uptake of immunoliposomes by the reticuloendothelial system. Details of the construction and optimization of these organ-specific immunoliposomes are reviewed. The drug delivery potential of this novel liposome system was demonstrated in an experimental pulmonary metastasis model. Immunoliposomes containing a lipophilic prodrug of deoxyfluorouridine effectively prolonged the survival time of the tumor-bearing mice. This and other therapeutic applications of the immunoliposomes are discussed. 25 refs., 5 figs.

  14. Cartilage-targeting drug delivery: can electrostatic interactions help?

    PubMed

    Bajpayee, Ambika G; Grodzinsky, Alan J

    2017-03-01

    Current intra-articular drug delivery methods do not guarantee sufficient drug penetration into cartilage tissue to reach cell and matrix targets at the concentrations necessary to elicit the desired biological response. Here, we provide our perspective on the utilization of charge-charge (electrostatic) interactions to enhance drug penetration and transport into cartilage, and to enable sustained binding of drugs within the tissue's highly negatively charged extracellular matrix. By coupling drugs to positively charged nanocarriers that have optimal size and charge, cartilage can be converted from a drug barrier into a drug reservoir for sustained intra-tissue delivery. Alternatively, a wide variety of drugs themselves can be made cartilage-penetrating by functionalizing them with specialized positively charged protein domains. Finally, we emphasize that appropriate animal models, with cartilage thickness similar to that of humans, must be used for the study of drug transport and retention in cartilage.

  15. Permeation enhancer strategies in transdermal drug delivery.

    PubMed

    Marwah, Harneet; Garg, Tarun; Goyal, Amit K; Rath, Goutam

    2016-01-01

    Today, ∼74% of drugs are taken orally and are not found to be as effective as desired. To improve such characteristics, transdermal drug delivery was brought to existence. This delivery system is capable of transporting the drug or macromolecules painlessly through skin into the blood circulation at fixed rate. Topical administration of therapeutic agents offers many advantages over conventional oral and invasive techniques of drug delivery. Several important advantages of transdermal drug delivery are prevention from hepatic first pass metabolism, enhancement of therapeutic efficiency and maintenance of steady plasma level of the drug. Human skin surface, as a site of drug application for both local and systemic effects, is the most eligible candidate available. New controlled transdermal drug delivery systems (TDDS) technologies (electrically-based, structure-based and velocity-based) have been developed and commercialized for the transdermal delivery of troublesome drugs. This review article covers most of the new active transport technologies involved in enhancing the transdermal permeation via effective drug delivery system.

  16. Prodrug Strategies in Ocular Drug Delivery

    PubMed Central

    Barot, Megha; Bagui, Mahuya; Gokulgandhi, Mitan R.; Mitra, Ashim K.

    2015-01-01

    Poor bioavailability of topically instilled drug is the major concern in the field of ocular drug delivery. Efflux transporters, static and dynamic ocular barriers often possess rate limiting factors for ocular drug therapy. Different formulation strategies like suspension, ointment, gels, nanoparticles, implants, dendrimers and liposomes have been employed in order to improve drug permeation and retention by evading rate limiting factors at the site of absorption. Chemical modification such as prodrug targeting various nutrient transporters (amino acids, peptide and vitamin) has evolved a great deal ofintereSt to improve ocular drug delivery. In this review, we have discussed various prodrug strategies which have been widely applied for enhancing therapeutic efficacy of ophthalmic drugs. The purpose of this review is to provide an update on the utilization of prodrug concept in ocular drug delivery. In addition, this review will highlight ongoing academic and industrial research and development in terms of ocular prodrug design and delivery. PMID:22530907

  17. Temperature-sensitive polymers for drug delivery.

    PubMed

    Fitzpatrick, Scott D; Fitzpatrick, Lindsay E; Thakur, Ajit; Mazumder, Mohammad A Jafar; Sheardown, Heather

    2012-07-01

    The ability to undergo rapid changes in response to subtle environmental cues make stimuli- responsive materials attractive candidates for minimally invasive, targeted and personalized drug delivery applications. This special report aims to highlight and provide a brief description of several of the significant natural and synthetic temperature-responsive materials that have clinical relevance for drug delivery applications. This report examines the advantages and disadvantages of natural versus synthetic materials and outlines various scaffold architectures that can be utilized with temperature-sensitive drug delivery materials. The authors provide a commentary on the current state of the field and provide their insight into future expectations for temperature-sensitive drug delivery, emphasizing the importance of the emergence of dual and multiresponsive systems capable of responding precisely to an expanding set of stimuli, thereby allowing the development of disease-specific drug delivery vehicles.

  18. Nanoparticles for intracellular-targeted drug delivery

    NASA Astrophysics Data System (ADS)

    Paulo, Cristiana S. O.; Pires das Neves, Ricardo; Ferreira, Lino S.

    2011-12-01

    Nanoparticles (NPs) are very promising for the intracellular delivery of anticancer and immunomodulatory drugs, stem cell differentiation biomolecules and cell activity modulators. Although initial studies in the area of intracellular drug delivery have been performed in the delivery of DNA, there is an increasing interest in the use of other molecules to modulate cell activity. Herein, we review the latest advances in the intracellular-targeted delivery of short interference RNA, proteins and small molecules using NPs. In most cases, the drugs act at different cellular organelles and therefore the drug-containing NPs should be directed to precise locations within the cell. This will lead to the desired magnitude and duration of the drug effects. The spatial control in the intracellular delivery might open new avenues to modulate cell activity while avoiding side-effects.

  19. [Site-specific drug delivery systems. I. Colon targeted delivery].

    PubMed

    Szente, Virág; Zelkó, Romána

    2007-01-01

    Colon specific drug delivery has gained increased importance not just for the delivery of the drugs for the treatment of local diseases associated with the colon like Chron's disease, ulcerative colitis, irritable bowel syndrome, cancer or infections, but also for the potential it holds for the systemic delivery of proteins (e.g. insulin) and therapeutic peptides. These systems enable the protection of healthy tissues from the side effects of drugs and the drug intake of targeted cells, as well. The formulation of colon specific drug delivery systems is of great impact in the case of diseases having circadian rhythm (midnight gerd). Such circadian rhythm release drug delivery systems are designed to provide a plasma concentration--time profile, which varies according to physiological need at different times during the dosing period, i.e., mimicking the circadian rhythm and severity/manifestation of gastric acid secretion (and/or midnight gerd). In general four primary approaches have been proposed for colon targeted delivery namely pH-dependent systems, time dependent systems, colonic microflora activated systems and prodrugs.

  20. Mechanisms Underlying Drug Delivery to Peripheral Arteries.

    PubMed

    Li, Jun; Tzafriri, Rami; Patel, Sandeep M; Parikh, Sahil A

    2017-04-01

    Delivery of drugs onto arterial targets via endovascular devices commands several principles: dissolution, diffusion, convection, drug binding, barriers to absorption, and interaction between the drug, delivery vehicle, and accepting arterial wall. The understanding of drug delivery in the coronary vasculature is vast; there is ongoing work needed in the peripheral arteries. There are differences that account for some failures of application of coronary technology into the peripheral vascular space. Breakthroughs in peripheral vascular interventional techniques building on current technologies require investigators willing to acknowledge the similarities and differences between these different vascular territories, while developing technologies adapted for peripheral arteries.

  1. Polysaccharides in colon-specific drug delivery.

    PubMed

    Sinha, V R; Kumria, R

    2001-08-14

    Natural polysaccharides are now extensively used for the development of solid dosage forms for delivery of drug to the colon. The rationale for the development of a polysaccharide based delivery system for colon is the presence of large amounts of polysaccharidases in the human colon as the colon is inhabited by a large number and variety of bacteria which secrete many enzymes e.g. beta-D-glucosidase, beta-D-galactosidase, amylase, pectinase, xylanase, beta-D-xylosidase, dextranase, etc. Various major approaches utilizing polysaccharides for colon-specific delivery are fermentable coating of the drug core, embedding of the drug in biodegradable matrix, formulation of drug-saccharide conjugate (prodrugs). A large number of polysaccharides have already been studied for their potential as colon-specific drug carrier systems, such as chitosan, pectin, chondroitin sulphate, cyclodextrin, dextrans, guar gum, inulin, amylose and locust bean gum. Recent efforts and approaches exploiting these polysaccharides in colon-specific drug delivery are discussed.

  2. Colloidal microgels in drug delivery applications

    PubMed Central

    Vinogradov, Serguei V.

    2005-01-01

    Colloidal microgels have recently received attention as environmentally responsive systems and now are increasingly used in applications as carriers for therapeutic drugs and diagnostic agents. Synthetic microgels consist of a crosslinked polymer network that provides a depot for loaded drugs, protection against environmental hazards and template for post-synthetic modification or vectorization of the drug carriers. The aim of this manuscript is to review recent attempts to develop new microgel formulations for oral drug delivery, to design metal-containing microgels for diagnostic and therapeutic applications, and to advance approaches including the systemic administration of microgels. Novel nanogel drug delivery systems developed in the authors’ laboratory are discussed in details including aspects of their synthesis, vectorization and recent applications for encapsulation of low molecular weight drugs or formulation of biological macromolecules. The findings reviewed here are encouraging for further development of the nanogels as intelligent drug carriers with such features as targeted delivery and triggered drug release. PMID:17168773

  3. Intravenous drug delivery in neonates: lessons learnt.

    PubMed

    Sherwin, Catherine M T; Medlicott, Natalie J; Reith, David M; Broadbent, Roland S

    2014-06-01

    Intravenous drug administration presents a series of challenges that relate to the pathophysiology of the neonate and intravenous infusion systems in neonates. These challenges arise from slow intravenous flow rates, small drug volume, dead space volume and limitations on the flush volume in neonates. While there is a reasonable understanding of newborn pharmacokinetics, an appreciation of the substantial delay and variability in the rate of drug delivery from the intravenous line is often lacking. This can lead to difficulties in accurately determining the pharmacokinetic and pharmacodynamic relationship of drugs in the smallest patients. The physical variables that affect the passage of drugs through neonatal lines need to be further explored in order to improve our understanding of their impact on the delivery of drugs by this route in neonates. Through careful investigation, the underlying causes of delayed drug delivery may be identified and administration protocols can then be modified to ensure predictable, appropriate drug input kinetics.

  4. Nanomedicine and drug delivery: a mini review

    NASA Astrophysics Data System (ADS)

    Mirza, Agha Zeeshan; Siddiqui, Farhan Ahmed

    2014-02-01

    The field of nanotechnology now has pivotal roles in electronics, biology and medicine. Its application can be appraised, as it involves the materials to be designed at atomic and molecular level. Due to the advantage of their size, nanospheres have been shown to be robust drug delivery systems and may be useful for encapsulating drugs and enabling more precise targeting with a controlled release. In this review specifically, we highlight the recent advances of this technology for medicine and drug delivery systems.

  5. Preparation, Characterization, and Optimization of Folic Acid-Chitosan-Methotrexate Core-Shell Nanoparticles by Box-Behnken Design for Tumor-Targeted Drug Delivery.

    PubMed

    Naghibi Beidokhti, Hamid Reza; Ghaffarzadegan, Reza; Mirzakhanlouei, Sasan; Ghazizadeh, Leila; Dorkoosh, Farid Abedin

    2017-01-01

    The objective of this study was to investigate the combined influence of independent variables in the preparation of folic acid-chitosan-methotrexate nanoparticles (FA-Chi-MTX NPs). These NPs were designed and prepared for targeted drug delivery in tumor. The NPs of each batch were prepared by coaxial electrospray atomization method and evaluated for particle size (PS) and particle size distribution (PSD). The independent variables were selected to be concentration of FA-chitosan, ratio of shell solution flow rate to core solution flow rate, and applied voltage. The process design of experiments (DOE) was obtained with three factors in three levels by Design expert software. Box-Behnken design was used to select 15 batches of experiments randomly. The chemical structure of FA-chitosan was examined by FTIR. The NPs of each batch were collected separately, and morphologies of NPs were investigated by field emission scanning electron microscope (FE-SEM). The captured pictures of all batches were analyzed by ImageJ software. Mean PS and PSD were calculated for each batch. Polynomial equation was produced for each response. The FE-SEM results showed the mean diameter of the core-shell NPs was around 304 nm, and nearly 30% of the produced NPs are in the desirable range. Optimum formulations were selected. The validation of DOE optimization results showed errors around 2.5 and 2.3% for PS and PSD, respectively. Moreover, the feasibility of using prepared NPs to target tumor extracellular pH was shown, as drug release was greater in the pH of endosome (acidic medium). Finally, our results proved that FA-Chi-MTX NPs were active against the human epithelial cervical cancer (HeLa) cells.

  6. Optimal control of objects on the micro- and nano-scale by electrokinetic and electromagnetic manipulation: For bio-sample preparation, quantum information devices and magnetic drug delivery

    NASA Astrophysics Data System (ADS)

    Probst, Roland

    feedback control of magnetic drug delivery to reach deeper tumors in the long term. To this end, I developed and experimentally demonstrated an optimal control algorithm to effectively manipulate a single ferrofluid droplet by magnetic feedback control. This algorithm was explicitly designed to address the nonlinear and cross-coupled nature of dynamic magnetic actuation and to best exploit available electromagnetic forces for the applications of magnetic drug delivery.

  7. Smart Polymers in Nasal Drug Delivery

    PubMed Central

    Chonkar, Ankita; Nayak, Usha; Udupa, N.

    2015-01-01

    Nasal drug delivery has now been recognized as a promising route for drug delivery due to its capability of transporting a drug to systemic circulation and central nervous system. Though nasal mucosa offers improved bioavailability and quick onset of action of the drug, main disadvantage associated with nasal drug delivery is mucocilliary clearance due to which drug particles get cleared from the nose before complete absorption through nasal mucosa. Therefore, mucoadhesive polymeric approach can be successfully used to enhance the retention of the drug on nasal mucosal surface. Here, some of the aspects of the stimuli responsive polymers have been discussed which possess liquid state at the room temperature and in response to nasal temperature, pH and ions present in mucous, can undergo in situ gelation in nasal cavity. In this review, several temperature responsive, pH responsive and ion responsive polymers used in nasal delivery, their gelling mechanisms have been discussed. Smart polymers not only able to enhance the retention of the drug in nasal cavity but also provide controlled release, ease of administration, enhanced permeation of the drug and protection of the drug from mucosal enzymes. Thus smart polymeric approach can be effectively used for nasal delivery of peptide drugs, central nervous system dugs and hormones. PMID:26664051

  8. Inorganic Nanomaterials as Carriers for Drug Delivery.

    PubMed

    Chen, Shizhu; Hao, Xiaohong; Liang, Xingjie; Zhang, Qun; Zhang, Cuimiao; Zhou, Guoqiang; Shen, Shigang; Jia, Guang; Zhang, Jinchao

    2016-01-01

    For safe and effective therapy, drugs must be delivered efficiently and with minimal systemic side effects. Nanostructured drug carriers enable the delivery of small-molecule drugs as well as nucleic acids and proteins. Inorganic nanomaterials are ideal for drug delivery platforms due to their unique physicochemical properties, such as facile preparation, good storage stability and biocompatibility. Many inorganic nanostructure-based drug delivery platforms have been prepared. Although there are still many obstacles to overcome, significant advances have been made in recent years. This review focuses on the status and development of inorganic nanostructures, including silica, quantum dots, gold, carbon-based and magnetic iron oxide-based nanostructures, as carriers for chemical and biological drugs. We specifically highlight the extensive use of these inorganic drug carriers for cancer therapy. Finally, we discuss the most important areas in the field that urgently require further study.

  9. Thiolated polymers as mucoadhesive drug delivery systems.

    PubMed

    Duggan, Sarah; Cummins, Wayne; O' Donovan, Orla; Hughes, Helen; Owens, Eleanor

    2017-03-30

    Mucoadhesion is the process of binding a material to the mucosal layer of the body. Utilising both natural and synthetic polymers, mucoadhesive drug delivery is a method of controlled drug release which allows for intimate contact between the polymer and a target tissue. It has the potential to increase bioavailability, decrease potential side effects and offer protection to more sensitive drugs such as proteins and peptide based drugs. The thiolation of polymers has, in the last number of years, come to the fore of mucoadhesive drug delivery, markedly improving mucoadhesion due to the introduction of free thiol groups onto the polymer backbone while also offering a more cohesive polymeric matrix for the slower and more controlled release of drug. This review explores the concept of mucoadhesion and the recent advances in both the polymers and the methods of thiolation used in the synthesis of mucoadhesive drug delivery devices.

  10. Radiation sterilization of new drug delivery systems.

    PubMed

    Abuhanoğlu, Gürhan; Ozer, A Yekta

    2014-06-01

    Radiation sterilization has now become a commonly used method for sterilization of several active ingredients in drugs or drug delivery systems containing these substances. In this context, many applications have been performed on the human products that are required to be sterile, as well as on pharmaceutical products prepared to be developed. The new drug delivery systems designed to deliver the medication to the target tissue or organ, such as microspheres, nanospheres, microemulsion, and liposomal systems, have been sterilized by gamma (γ) and beta (β) rays, and more recently, by e-beam sterilization. In this review, the sterilization of new drug delivery systems was discussed other than conventional drug delivery systems by γ irradiation.

  11. Mucosal drug delivery: membranes, methodologies, and applications.

    PubMed

    Song, Yifan; Wang, Yiping; Thakur, Rashmi; Meidan, Victor M; Michniak, Bozena

    2004-01-01

    In recent years, extensive research into novel forms of drug delivery has suggested that mucosal approaches offer a promising therapeutic alternative, especially for systemically acting drugs. Transmucosal drug delivery offers many benefits, including noninvasive administration, convenience, rapid onset, as well as elimination of hepatic first-pass metabolism. The investigated absorptive surfaces consist of the nasal, buccal, ocular, vaginal, and rectal mucosae. Among these, the nasal and buccal routes have proved the most promising to date. The bioavailability achieved mainly depends upon the pathophysiological state of the mucosa and the properties of both the drug and delivery systems. Various agents can increase the efficacy of transmucosal drug delivery. These include cyclodextrins, bile salts, surfactants, fusidic acid derivatives, microspheres, liposomes, and bioadhesive agents. The mechanisms of action, effectiveness, and toxicity profiles of these enhancers have been investigated extensively in both animal and human models.

  12. Controlling subcellular delivery to optimize therapeutic effect

    PubMed Central

    Mossalam, Mohanad; Dixon, Andrew S; Lim, Carol S

    2010-01-01

    This article focuses on drug targeting to specific cellular organelles for therapeutic purposes. Drugs can be delivered to all major organelles of the cell (cytosol, endosome/lysosome, nucleus, nucleolus, mitochondria, endoplasmic reticulum, Golgi apparatus, peroxisomes and proteasomes) where they exert specific effects in those particular subcellular compartments. Delivery can be achieved by chemical (e.g., polymeric) or biological (e.g., signal sequences) means. Unidirectional targeting to individual organelles has proven to be immensely successful for drug therapy. Newer technologies that accommodate multiple signals (e.g., protein switch and virus-like delivery systems) mimic nature and allow for a more sophisticated approach to drug delivery. Harnessing different methods of targeting multiple organelles in a cell will lead to better drug delivery and improvements in disease therapy. PMID:21113240

  13. Molecularly imprinted polymers as the future drug delivery devices.

    PubMed

    Luliński, Piotr

    2013-01-01

    In recent years, the investigations of new drug delivery systems have been directed on the development of some "intelligent" drug delivery devices that are able to directly respond to the patient's individual needs. New drug delivery systems should maximize the efficiency of administrated therapeutic agents and improve the patient's quality of life. Introduction of the new drug delivery devices is an important scientific goal, which could be achieved by combining new technologies and intelligent biomaterials. Molecular imprinting technology has a high potential for the preparation of optimized drug delivery forms. Here, molecularly imprinted polymers (MIPs) are promising new materials for such purposes, but their application in this field is nowadays at a developing stage. In this review, the principles of molecular imprinting and the recognition-release mechanisms of polymeric matrices are discussed. The potential application of molecularly imprinted materials as the future drug delivery systems with various administering routes (transdermal, ocular or oral) are presented, and some future prospects for the imprinted polymers are outlined.

  14. Discovery and Delivery of Synergistic Chemotherapy Drug Combinations to Tumors

    NASA Astrophysics Data System (ADS)

    Camacho, Kathryn Militar

    Chemotherapy combinations for cancer treatments harbor immense therapeutic potentials which have largely been untapped. Of all diseases, clinical studies of drug combinations are the most prevalent in oncology, yet their effectiveness is disputable, as complete tumor regressions are rare. Our research has been devoted towards developing delivery vehicles for combinations of chemotherapy drugs which elicit significant tumor reduction yet limit toxicity in healthy tissue. Current administration methods assume that chemotherapy combinations at maximum tolerable doses will provide the greatest therapeutic effect -- a presumption which often leads to unprecedented side effects. Contrary to traditional administration, we have found that drug ratios rather than total cumulative doses govern combination therapeutic efficacy. In this thesis, we have developed nanoparticles to incorporate synergistic ratios of chemotherapy combinations which significantly inhibit cancer cell growth at lower doses than would be required for their single drug counterparts. The advantages of multi-drug incorporation in nano-vehicles are many: improved accumulation in tumor tissue via the enhanced permeation and retention effect, limited uptake in healthy tissue, and controlled exposure of tumor tissue to optimal synergistic drug ratios. To exploit these advantages for polychemotherapy delivery, two prominent nanoparticles were investigated: liposomes and polymer-drug conjugates. Liposomes represent the oldest class of nanoparticles, with high drug loading capacities and excellent biocompatibility. Polymer-drug conjugates offer controlled drug incorporations through reaction stoichiometry, and potentially allow for delivery of precise ratios. Here, we show that both vehicles, when armed with synergistic ratios of chemotherapy drugs, significantly inhibit tumor growth in an aggressive mouse breast carcinoma model. Furthermore, versatile drug incorporation methods investigated here can be broadly

  15. Perspectives on transdermal ultrasound mediated drug delivery

    PubMed Central

    Smith, Nadine Barrie

    2007-01-01

    The use of needles for multiple injection of drugs, such as insulin for diabetes, can be painful. As a result, prescribed drug noncompliance can result in severe medical complications. Several noninvasive methods exist for transdermal drug delivery. These include chemical mediation using liposomes and chemical enhancers or physical mechanisms such as microneedles, iontophoresis, electroporation, and ultrasound. Ultrasound enhanced transdermal drug delivery offers advantages over traditional drug delivery methods which are often invasive and painful. A broad review of the transdermal ultrasound drug delivery literature has shown that this technology offers promising potential for noninvasive drug administration. From a clinical perspective, few drugs, proteins or peptides have been successfully administered transdermally because of the low skin permeability to these relatively large molecules, although much work is underway to resolve this problem. The proposed mechanism of ultrasound has been suggested to be the result of cavitation, which is discussed along with the bioeffects from therapeutic ultrasound. For low frequencies, potential transducers which can be used for drug delivery are discussed, along with cautions regarding ultrasound safety versus efficacy. PMID:18203426

  16. Recent advances in ophthalmic drug delivery

    PubMed Central

    Kompella, Uday B; Kadam, Rajendra S; Lee, Vincent HL

    2011-01-01

    Topical ocular drug bioavailability is notoriously poor, in the order of 5% or less. This is a consequence of effective multiple barriers to drug entry, comprising nasolacrimal drainage, epithelial drug transport barriers and clearance from the vasculature in the conjunctiva. While sustained drug delivery to the back of the eye is now feasible with intravitreal implants such as Vitrasert™ (~6 months), Retisert™ (~3 years) and Iluvien™ (~3 years), currently there are no marketed delivery systems for long-term drug delivery to the anterior segment of the eye. The purpose of this article is to summarize the resurgence in interest to prolong and improve drug entry from topical administration. These approaches include mucoadhesives, viscous polymer vehicles, transporter-targeted prodrug design, receptor-targeted functionalized nanoparticles, iontophoresis, punctal plug and contact lens delivery systems. A few of these delivery systems might be useful in treating diseases affecting the back of the eye. Their effectiveness will be compared against intravitreal implants (upper bound of effectiveness) and trans-scleral systems (lower bound of effectiveness). Refining the animal model by incorporating the latest advances in microdialysis and imaging technology is key to expanding the knowledge central to the design, testing and evaluation of the next generation of innovative ocular drug delivery systems. PMID:21399724

  17. Targeted Nanomedicine for Suppression of CD44 and Simultaneous Cell Death Induction in Ovarian Cancer: an Optimal Delivery of siRNA and Anticancer Drug

    PubMed Central

    Shah, Vatsal; Taratula, Oleh; Garbuzenko, Olga B.; Taratula, Olena R.; Rodriguez-Rodriguez, Lorna; Minko, Tamara

    2013-01-01

    Purpose: The proposed project is aimed at enhancing the efficiency of epithelial ovarian cancer treatment and reducing adverse side effects of chemotherapy using nanotechnology. Overexpression of the CD44 membrane receptor results in tumor initiation, growth, tumor stem cells specific behavior, development of drug resistance, and metastases. We hypothesize that a developed cancer targeted delivery system which combines CD44 siRNA with paclitaxel would successfully deliver its payload inside cancer cells, effectively induce cell death, and prevent metastases. Experimental Design: We synthesized, characterized, and tested a nanoscale-based drug delivery system containing a modified Polypropylenimine (PPI) dendrimer as a carrier; anticancer drug paclitaxel as a cell death inducer; a synthetic analog of luteinizing hormone-releasing hormone (LHRH) peptide as a tumor targeting moiety, and siRNA targeted to CD44 mRNA. The proposed NDDS was tested in vitro and in vivo using metastatic ovarian cancer cells isolated from patients with malignant ascites. Results: We found that in contrast to cells isolated from primary tumors, CD44 was highly overexpressed in metastatic cancer cells. Treatment with the proposed tumor-targeted nanoscale-based nucleic acid and drug delivery system led to the suppression of CD44 mRNA and protein, efficient induction of cell death, effective tumor shrinkage, and prevention of adverse side effects on healthy organs. Conclusion: We show a high therapeutic potential for combinatorial treatment of ovarian carcinoma with a novel drug delivery system that effectively transports siRNA targeting to CD44 mRNA simultaneously with cytotoxic agents. PMID:24036854

  18. Chitosan Microspheres in Novel Drug Delivery Systems

    PubMed Central

    Mitra, Analava; Dey, Baishakhi

    2011-01-01

    The main aim in the drug therapy of any disease is to attain the desired therapeutic concentration of the drug in plasma or at the site of action and maintain it for the entire duration of treatment. A drug on being used in conventional dosage forms leads to unavoidable fluctuations in the drug concentration leading to under medication or overmedication and increased frequency of dose administration as well as poor patient compliance. To minimize drug degradation and loss, to prevent harmful side effects and to increase drug bioavailability various drug delivery and drug targeting systems are currently under development. Handling the treatment of severe disease conditions has necessitated the development of innovative ideas to modify drug delivery techniques. Drug targeting means delivery of the drug-loaded system to the site of interest. Drug carrier systems include polymers, micelles, microcapsules, liposomes and lipoproteins to name some. Different polymer carriers exert different effects on drug delivery. Synthetic polymers are usually non-biocompatible, non-biodegradable and expensive. Natural polymers such as chitin and chitosan are devoid of such problems. Chitosan comes from the deacetylation of chitin, a natural biopolymer originating from crustacean shells. Chitosan is a biocompatible, biodegradable, and nontoxic natural polymer with excellent film-forming ability. Being of cationic character, chitosan is able to react with polyanions giving rise to polyelectrolyte complexes. Hence chitosan has become a promising natural polymer for the preparation of microspheres/nanospheres and microcapsules. The techniques employed to microencapsulate with chitosan include ionotropic gelation, spray drying, emulsion phase separation, simple and complex coacervation. This review focuses on the preparation, characterization of chitosan microspheres and their role in novel drug delivery systems. PMID:22707817

  19. Drug Delivery Systems, CNS Protection, and the Blood Brain Barrier

    PubMed Central

    Upadhyay, Ravi Kant

    2014-01-01

    Present review highlights various drug delivery systems used for delivery of pharmaceutical agents mainly antibiotics, antineoplastic agents, neuropeptides, and other therapeutic substances through the endothelial capillaries (BBB) for CNS therapeutics. In addition, the use of ultrasound in delivery of therapeutic agents/biomolecules such as proline rich peptides, prodrugs, radiopharmaceuticals, proteins, immunoglobulins, and chimeric peptides to the target sites in deep tissue locations inside tumor sites of brain has been explained. In addition, therapeutic applications of various types of nanoparticles such as chitosan based nanomers, dendrimers, carbon nanotubes, niosomes, beta cyclodextrin carriers, cholesterol mediated cationic solid lipid nanoparticles, colloidal drug carriers, liposomes, and micelles have been discussed with their recent advancements. Emphasis has been given on the need of physiological and therapeutic optimization of existing drug delivery methods and their carriers to deliver therapeutic amount of drug into the brain for treatment of various neurological diseases and disorders. Further, strong recommendations are being made to develop nanosized drug carriers/vehicles and noninvasive therapeutic alternatives of conventional methods for better therapeutics of CNS related diseases. Hence, there is an urgent need to design nontoxic biocompatible drugs and develop noninvasive delivery methods to check posttreatment clinical fatalities in neuropatients which occur due to existing highly toxic invasive drugs and treatment methods. PMID:25136634

  20. Stimuli sensitive hydrogels for ophthalmic drug delivery: A review.

    PubMed

    Kushwaha, Swatantra Ks; Saxena, Prachi; Rai, Ak

    2012-04-01

    Amongst the various routes of drug delivery, the field of ocular drug delivery is one of the most interesting and challenging endeavors facing the pharmaceutical scientist for past 10-20 years. As an isolated organ, eye is very difficult to study from a drug delivery point of view. Despite this limitation, improvements have been made with the objective of maintaining the drug in the biophase for an extended period. A major problem in ocular therapeutics is the attainment of an optimal drug concentration at the site of action. To achieve effective ophthalmic therapy, an adequate amount of active ingredient must be delivered and maintained within the eye. The most frequently used dosage forms, i.e., eye solution, eye ointments, eye gels, and eye suspensions are compromised in their effectiveness by several limitations leading to poor ocular bioavailability. Ophthalmic use of viscosity-enhancing agents, penetration enhancers, cyclodextrins, prodrug approaches, and ocular inserts, and the ready existing drug carrier systems along with their application to ophthalmic drug delivery are common to improve ocular bioavailability. Amongst these hydrogel (stimuli sensitive) systems are important, which undergo reversible volume and/or sol-gel phase transitions in response to physiological (temperature, pH and present of ions in organism fluids, enzyme substrate) or other external (electric current, light) stimuli. They help to increase in precorneal residence time of drug to a sufficient extent that an ocularly delivered drug can exhibit its maximum biological action. The concept of this innovative ophthalmic delivery approach is to decrease the systemic side effects and to create a more pronounced effect with lower doses of the drug. The present article describes the advantages and use stimuli sensitive of hydrogel systems in ophthalmic drug delivery.

  1. Stimuli sensitive hydrogels for ophthalmic drug delivery: A review

    PubMed Central

    Kushwaha, Swatantra KS; Saxena, Prachi; Rai, AK

    2012-01-01

    Amongst the various routes of drug delivery, the field of ocular drug delivery is one of the most interesting and challenging endeavors facing the pharmaceutical scientist for past 10-20 years. As an isolated organ, eye is very difficult to study from a drug delivery point of view. Despite this limitation, improvements have been made with the objective of maintaining the drug in the biophase for an extended period. A major problem in ocular therapeutics is the attainment of an optimal drug concentration at the site of action. To achieve effective ophthalmic therapy, an adequate amount of active ingredient must be delivered and maintained within the eye. The most frequently used dosage forms, i.e., eye solution, eye ointments, eye gels, and eye suspensions are compromised in their effectiveness by several limitations leading to poor ocular bioavailability. Ophthalmic use of viscosity-enhancing agents, penetration enhancers, cyclodextrins, prodrug approaches, and ocular inserts, and the ready existing drug carrier systems along with their application to ophthalmic drug delivery are common to improve ocular bioavailability. Amongst these hydrogel (stimuli sensitive) systems are important, which undergo reversible volume and/or sol-gel phase transitions in response to physiological (temperature, pH and present of ions in organism fluids, enzyme substrate) or other external (electric current, light) stimuli. They help to increase in precorneal residence time of drug to a sufficient extent that an ocularly delivered drug can exhibit its maximum biological action. The concept of this innovative ophthalmic delivery approach is to decrease the systemic side effects and to create a more pronounced effect with lower doses of the drug. The present article describes the advantages and use stimuli sensitive of hydrogel systems in ophthalmic drug delivery. PMID:23119233

  2. Vesicular carriers for dermal drug delivery.

    PubMed

    Sinico, Chiara; Fadda, Anna Maria

    2009-08-01

    The skin can offer several advantages as a route of drug administration although its barrier nature makes it difficult for most drugs to penetrate into and permeate through it. During the past decades there has been a lot of interest in lipid vesicles as a tool to improve drug topical delivery. Vesicular systems such as liposomes, niosomes, ethosomes and elastic, deformable vesicles provide an alternative for improved skin drug delivery. The function of vesicles as topical delivery systems is controversial with variable effects being reported in relation to the type of vesicles and their composition. In fact, vesicles can act as drug carriers controlling active release; they can provide a localized depot in the skin for dermally active compounds and enhance transdermal drug delivery. A wide variety of lipids and surfactants can be used to prepare vesicles, which are commonly composed of phospholipids (liposomes) or non-ionic surfactants (niosomes). Vesicle composition and preparation method influence their physicochemical properties (size, charge, lamellarity, thermodynamic state, deformability) and therefore their efficacy as drug delivery systems. A review of vesicle value in localizing drugs within the skin at the site of action will be provided with emphasis on their potential mechanism of action.

  3. Colloidal polymeric nanoparticles and brain drug delivery.

    PubMed

    Khalil, Najeh Maissar; Mainardes, Rubiana Mara

    2009-07-01

    The blood brain barrier protects the brain from harmful substances in the blood stream and has stopped the development of many powerful and interesting drugs candidates for central nervous system due to the low poor distribution and by efflux mechanisms. Many different approaches have been developed in order to overcome this barrier and the drug gain access to the brain. The polymeric nanoparticles are efficient colloidal systems that have been investigated to the brain drug delivery. This review will focus on the current strategies for brain drug delivery emphasizing the properties and characteristics of polymeric nanoparticles for this purpose.

  4. Tissue Bioeffects during Ultrasound-mediated Drug Delivery

    NASA Astrophysics Data System (ADS)

    Sutton, Jonathan

    Ultrasound has been developed as both a valuable diagnostic tool and a potent promoter of beneficial tissue bioeffects for the treatment of cardiovascular disease. Vascular effects can be mediated by mechanical oscillations of circulating microbubbles, or ultrasound contrast agents, which may also encapsulate and shield a therapeutic agent in the bloodstream. Oscillating microbubbles can create stresses directly on nearby tissue or induce fluid effects that effect drug penetration into vascular tissue, lyse thrombi, or direct drugs to optimal locations for delivery. These investigations have spurred continued research into alternative therapeutic applications, such as bioactive gas delivery. This dissertation addresses a fundamental hypothesis in biomedical ultrasound: ultrasound-mediated drug delivery is capable of increasing the penetration of drugs across different physiologic barriers within the cardiovascular system, such as the vascular endothelium, blood clots, and smooth muscle cells.

  5. Nuclear drug delivery for cancer chemotherapy.

    PubMed

    Sui, Meihua; Liu, Wenwen; Shen, Youqing

    2011-10-30

    Nanosystems with unique physical and biological properties have been extensively explored for cancer targeted intracellular delivery of small-molecular chemotherapeutic drugs to increase their therapeutic efficacies and to minimize their side effects. A large number of anticancer drugs are DNA-toxins that bind nuclear DNA or its associated enzymes to exert their cytotoxicity to cancer cells. After entering tumor cells, they need to be further delivered to the nucleus for actions. Herein, we discuss the biological barriers and summarize recent progress of nuclear drug delivery for cancer chemotherapy, emphasizing strategies that appear useful for design of vehicles capable of delivering drugs to the nucleus, particularly for in vivo applications. The existing obstacles or problems that need to be overcome before successful applications of nuclear drug delivery for cancer chemotherapy are also discussed.

  6. Molecular imprinted polymers as drug delivery vehicles.

    PubMed

    Zaidi, Shabi Abbas

    2016-09-01

    This review is aimed to discuss the molecular imprinted polymer (MIP)-based drug delivery systems (DDS). Molecular imprinted polymers have proved to possess the potential and also as a suitable material in several areas over a long period of time. However, only recently it has been employed for pharmaceuticals and biomedical applications, particularly as drug delivery vehicles due to properties including selective recognition generated from imprinting the desired analyte, favorable in harsh experimental conditions, and feedback-controlled recognitive drug release. Hence, this review will discuss their synthesis, the reason they are selected as drug delivery vehicles and for their applications in several drug administration routes (i.e. transdermal, ocular and gastrointestinal or stimuli-reactive routes).

  7. Hydrogen peroxide mediated transvaginal drug delivery.

    PubMed

    Fatakdawala, Hussain; Uhland, Scott A

    2011-05-16

    Simple, safe and effective permeability enhancers are crucial for successful non-invasive drug delivery methods. We seek local permeability augmentation mechanisms for integration into passive or active architectures in order to enable novel therapeutic delivery routes of the target drug while minimizing drug formulation challenges. This study explores the efficacy of hydrogen peroxide (HP) as a permeability enhancer for transmucosal delivery of macromolecules. HP at low concentrations (2–8 mM) is an effective permeability enhancer that is locally metabolized and safe. HP improves drug permeation through mucosa by altering tight junctions (TJ) between cells and oxidizing enzymes that function to degrade the foreign species. Results from trans-epithelial electrical resistance measurements and cell viability assay show reversible disassembly of TJ with minimal cell damage demonstrating the feasibility of HP as a safe permeability enhancer for drug delivery. Permeation studies show that HP treatment of cell cultured vaginal mucosa significantly enhances the permeability to insulin by more than an order of magnitude. This work lays foundation for the development of a drug delivery platform that administers drug doses by enhancing the permeability of local epithelial tissue via a separate HP treatment step.

  8. Progress in antiretroviral drug delivery using nanotechnology

    PubMed Central

    Mallipeddi, Rama; Rohan, Lisa Cencia

    2010-01-01

    There are currently a number of antiretroviral drugs that have been approved by the Food and Drug Administration for use in the treatment of human immunodeficiency virus (HIV). More recently, antiretrovirals are being evaluated in the clinic for prevention of HIV infection. Due to the challenging nature of treatment and prevention of this disease, the use of nanocarriers to achieve more efficient delivery of antiretroviral drugs has been studied. Various forms of nanocarriers, such as nanoparticles (polymeric, inorganic, and solid lipid), liposomes, polymeric micelles, dendrimers, cyclodextrins, and cell-based nanoformulations have been studied for delivery of drugs intended for HIV prevention or therapy. The aim of this review is to provide a summary of the application of nanocarrier systems to the delivery of anti-HIV drugs, specifically antiretrovirals. For anti-HIV drugs to be effective, adequate distribution to specific sites in the body must be achieved, and effective drug concentrations must be maintained at those sites for the required period of time. Nanocarriers provide a means to overcome cellular and anatomical barriers to drug delivery. Their application in the area of HIV prevention and therapy may lead to the development of more effective drug products for combating this pandemic disease. PMID:20957115

  9. Microneedles for drug and vaccine delivery

    PubMed Central

    Kim, Yeu-Chun; Park, Jung-Hwan; Prausnitz, Mark R.

    2012-01-01

    Microneedles were first conceptualized for drug delivery many decades ago, but only became the subject of significant research starting in the mid-1990’s when microfabrication technology enabled their manufacture as (i) solid microneedles for skin pretreatment to increase skin permeability, (ii) microneedles coated with drug that dissolves off in the skin, (iii) polymer microneedles that encapsulate drug and fully dissolve in the skin and (iv) hollow microneedles for drug infusion into the skin. As shown in more than 350 papers now published in the field, microneedles have been used to deliver a broad range of different low molecular weight drugs, biotherapeutics and vaccines, including published human studies with a number of small-molecule and protein drugs and vaccines. Influenza vaccination using a hollow microneedle is in widespread clinical use and a number of solid microneedle products are sold for cosmetic purposes. In addition to applications in the skin, microneedles have also been adapted for delivery of bioactives into the eye and into cells. Successful application of microneedles depends on device function that facilitates microneedle insertion and possible infusion into skin, skin recovery after microneedle removal, and drug stability during manufacturing, storage and delivery, and on patient outcomes, including lack of pain, skin irritation and skin infection, in addition to drug efficacy and safety. Building off a strong technology base and multiple demonstrations of successful drug delivery, microneedles are poised to advance further into clinical practice to enable better pharmaceutical therapies, vaccination and other applications. PMID:22575858

  10. Designing hydrogels for controlled drug delivery

    NASA Astrophysics Data System (ADS)

    Li, Jianyu; Mooney, David J.

    2016-12-01

    Hydrogel delivery systems can leverage therapeutically beneficial outcomes of drug delivery and have found clinical use. Hydrogels can provide spatial and temporal control over the release of various therapeutic agents, including small-molecule drugs, macromolecular drugs and cells. Owing to their tunable physical properties, controllable degradability and capability to protect labile drugs from degradation, hydrogels serve as a platform on which various physiochemical interactions with the encapsulated drugs occur to control drug release. In this Review, we cover multiscale mechanisms underlying the design of hydrogel drug delivery systems, focusing on physical and chemical properties of the hydrogel network and the hydrogel-drug interactions across the network, mesh and molecular (or atomistic) scales. We discuss how different mechanisms interact and can be integrated to exert fine control in time and space over drug presentation. We also collect experimental release data from the literature, review clinical translation to date of these systems and present quantitative comparisons between different systems to provide guidelines for the rational design of hydrogel delivery systems.

  11. Transpapillary Drug Delivery to the Breast

    PubMed Central

    Dave, Kaushalkumar; Averineni, Ranjith; Sahdev, Preety; Perumal, Omathanu

    2014-01-01

    The study was aimed at investigating localized topical drug delivery to the breast via mammary papilla (nipple). 5-fluorouracil (5-FU) and estradiol (EST) were used as model hydrophilic and hydrophobic compounds respectively. Porcine and human nipple were used for in-vitro penetration studies. The removal of keratin plug enhanced the drug transport through the nipple. The drug penetration was significantly higher through the nipple compared to breast skin. The drug’s lipophilicity had a significant influence on drug penetration through nipple. The ducts in the nipple served as a major transport pathway to the underlying breast tissue. Results showed that porcine nipple could be a potential model for human nipple. The topical application of 5-FU on the rat nipple resulted in high drug concentration in the breast and minimal drug levels in plasma and other organs. Overall, the findings from this study demonstrate the feasibility of localized drug delivery to the breast through nipple. PMID:25545150

  12. Electrically responsive smart hydrogels in drug delivery: a review.

    PubMed

    Kulkarni, R V; Biswanath, Sa

    2007-01-01

    Recently, much of the research activity has been focused on the development of stimuli-responsive hydrogels. Such hydrogels can show a response to the external or internal stimuli in the form of rapid changes in the physical nature of the polymeric network. This hydrogel property can be utilized for drug delivery applications. A literature search suggests that current research related to stimuli responsive drug delivery systems deals with temperature sensitive, pH sensitive, glucose sensitive and bio-molecule sensitive hydrogels. Electrically responsive hydrogels have also been recently developed in the form of gel matrices, implants and membranes for drug delivery. Control over the release of drugs such as quantity and timing, is essential to optimize drug therapy. Reports say that the electrically controlled in vitro and in vivo drug release studies have been carried out on polyelectrolyte hydrogels. A pulsatile pattern of drug release was achieved with the alternative application and removal of the electrical stimulus. This article gives an overview of the latest developments in the formulation of drug delivery systems using electrically responsive hydrogels.

  13. Mucus-penetrating nanoparticles for vaginal and gastrointestinal drug delivery

    NASA Astrophysics Data System (ADS)

    Ensign-Hodges, Laura

    failed to reach. However, hypotonic formulations caused free drugs to be drawn through the epithelium, reducing vaginal retention. In contrast, hypotonic formulations caused MPP to accumulate rapidly and uniformly on vaginal surfaces, ideally positioned for sustained drug delivery. Using a mouse model of vaginal genital herpes (HSV-2) infection, we found that hypotonic delivery of free drug led to improved immediate protection, but diminished longer-term protection. Minimally hypotonic formulations provided rapid and uniform delivery of MPP to the entire vaginal surface, thus enabling formulations with minimal risk of epithelial toxicity. We then describe an ex vivo method for characterizing particle transport on freshly excised mucosal tissues. By directly observing MPP transport on vaginal, gastrointestinal, and respiratory tissue, we were able to determine an innate difference in mucus mesh size at different anatomical locations. In addition, we were able to optimize particle size for gastrointestinal delivery in mice. As described here, there are numerous barriers to effective drug delivery in the gastrointestinal tract, including the mucus barrier. We go on to demonstrate that MPP can improve delivery in the gastrointestinal tract, both by rectal and oral administration. Finally, we describe the use of MPP for improving vaginal drug delivery. Incomplete drug coverage and short duration of action limit the effectiveness of vaginally administered drugs, including microbicides for preventing sexually transmitted infections. We show that MPP provide uniform distribution over the vaginal epithelium, whereas CP are aggregated by mouse vaginal mucus, leading to poor distribution. By penetrating into the deepest mucus layers in the rugae, more MPP were retained in the vaginal tract compared to CP. After 24 h, when delivered in a conventional vaginal gel, patches of a model drug remained on the vaginal epithelium, whereas the epithelium was coated with drug delivered by MPP

  14. Intelligent, self-powered, drug delivery systems.

    PubMed

    Patra, Debabrata; Sengupta, Samudra; Duan, Wentao; Zhang, Hua; Pavlick, Ryan; Sen, Ayusman

    2013-02-21

    Self-propelled nano/micromotors and pumps are considered to be next generation drug delivery systems since the carriers can either propel themselves ("motor"-based drug delivery) or be delivered ("pump"-based drug delivery) to the target in response to specific biomarkers. Recently, there has been significant advancement towards developing nano/microtransporters into proof-of-concept tools for biomedical applications. This review encompasses the progress made to date on the design of synthetic nano/micromotors and pumps with respect to transportation and delivery of cargo at specific locations. Looking ahead, it is possible to imagine a day when intelligent machines navigate through the human body and perform challenging tasks.

  15. Novel biodegradable nanocarriers for enhanced drug delivery.

    PubMed

    Gagliardi, Mariacristina

    2016-12-01

    With the refinement of functional properties, the interest around biodegradable materials, in biorelated applications and, in particular, in their use as controlled drug-delivery systems, increased in the last decades. Biodegradable materials are an ideal platform to obtain nanoparticles for spatiotemporal controlled drug delivery for the in vivo administration, thanks to their biocompatibility, functionalizability, the control exerted on delivery rates and the complete degradation. Their application in systems for cancer treatment, brain and cardiovascular diseases is already a consolidated practice in research, while the bench-to-bedside translation is still late. This review aims at summarizing reported applications of biodegradable materials to obtain drug-delivery nanoparticles in the last few years, giving a complete overview of pros and cons related to degradable nanomedicaments.

  16. Microfluidic device for drug delivery

    NASA Technical Reports Server (NTRS)

    Beebe, David J. (Inventor); MacDonald, Michael J. (Inventor); Eddington, David T. (Inventor); Mensing, Glennys A. (Inventor)

    2010-01-01

    A microfluidic device is provided for delivering a drug to an individual. The microfluidic device includes a body that defines a reservoir for receiving the drug therein. A valve interconnects the reservoir to an output needle that is insertable into the skin of an individual. A pressure source urges the drug from the reservoir toward the needle. The valve is movable between a closed position preventing the flow of the drug from the reservoir to the output needle and an open position allowing for the flow of the drug from the reservoir to the output needle in response to a predetermined condition in the physiological fluids of the individual.

  17. Lipid-Based Drug Delivery Systems

    PubMed Central

    Shrestha, Hina; Bala, Rajni; Arora, Sandeep

    2014-01-01

    The principle objective of formulation of lipid-based drugs is to enhance their bioavailability. The use of lipids in drug delivery is no more a new trend now but is still the promising concept. Lipid-based drug delivery systems (LBDDS) are one of the emerging technologies designed to address challenges like the solubility and bioavailability of poorly water-soluble drugs. Lipid-based formulations can be tailored to meet a wide range of product requirements dictated by disease indication, route of administration, cost consideration, product stability, toxicity, and efficacy. These formulations are also a commercially viable strategy to formulate pharmaceuticals, for topical, oral, pulmonary, or parenteral delivery. In addition, lipid-based formulations have been shown to reduce the toxicity of various drugs by changing the biodistribution of the drug away from sensitive organs. However, the number of applications for lipid-based formulations has expanded as the nature and type of active drugs under investigation have become more varied. This paper mainly focuses on novel lipid-based formulations, namely, emulsions, vesicular systems, and lipid particulate systems and their subcategories as well as on their prominent applications in pharmaceutical drug delivery. PMID:26556202

  18. Localized Cell and Drug Delivery for Auditory Prostheses

    PubMed Central

    Hendricks, Jeffrey L.; Chikar, Jennifer A.; Crumling, Mark A.; Raphael, Yehoash; Martin, David C.

    2011-01-01

    Localized cell and drug delivery to the cochlea and central auditory pathway can improve the safety and performance of implanted auditory prostheses (APs). While generally successful, these devices have a number of limitations and adverse effects including limited tonal and dynamic ranges, channel interactions, unwanted stimulation of non-auditory nerves, immune rejection, and infections including meningitis. Many of these limitations are associated with the tissue reactions to implanted auditory prosthetic devices and the gradual degeneration of the auditory system following deafness. Strategies to reduce the insertion trauma, degeneration of target neurons, fibrous and bony tissue encapsulation, and immune activation can improve the viability of tissue required for AP function as well as improve the resolution of stimulation for reduced channel interaction and improved place-pitch and level discrimination. Many pharmaceutical compounds have been identified that promote the viability of auditory tissue and prevent inflammation and infection. Cell delivery and gene therapy have provided promising results for treating hearing loss and reversing degeneration. Currently, many clinical and experimental methods can produce extremely localized and sustained drug delivery to address AP limitations. These methods provide better control over drug concentrations while eliminating the adverse effects of systemic delivery. Many of these drug delivery techniques can be integrated into modern auditory prosthetic devices to optimize the tissue response to the implanted device and reduce the risk of infection or rejection. Together, these methods and pharmaceutical agents can be used to optimize the tissue-device interface for improved AP safety and effectiveness. PMID:18573323

  19. A pulsed mode electrolytic drug delivery device

    NASA Astrophysics Data System (ADS)

    Yi, Ying; Buttner, Ulrich; Carreno, Armando A. A.; Conchouso, David; Foulds, Ian G.

    2015-10-01

    This paper reports the design of a proof-of-concept drug delivery device that is actuated using the bubbles formed during electrolysis. The device uses a platinum (Pt) coated nickel (Ni) metal foam and a solid drug in reservoir (SDR) approach to improve the device’s performance. This electrochemically-driven pump has many features that are unlike conventional drug delivery devices: it is capable of pumping periodically and being refilled automatically; it features drug release control; and it enables targeted delivery. Pt-coated metal foam is used as a catalytic reforming element, which reduces the period of each delivery cycle. Two methods were used for fabricating the Pt-coated metal: sputtering and electroplating. Of these two methods, the sputtered Pt-coated metal foam has a higher pumping rate; it also has a comparable recombination rate when compared to the electroplated Pt-coated metal foam. The only drawback of this catalytic reformer is that it consumes nickel scaffold. Considering long-term applications, the electroplated Pt metal foam was selected for drug delivery, where a controlled drug release rate of 2.2 μg  ±  0.3 μg per actuation pulse was achieved using 4 mW of power.

  20. Microfabrication Technologies for Oral Drug Delivery

    PubMed Central

    Sant, Shilpa; Tao, Sarah L.; Fisher, Omar; Xu, Qiaobing; Peppas, Nicholas A.; Khademhosseini, Ali

    2012-01-01

    Micro-/nanoscale technologies such as lithographic techniques and microfluidics offer promising avenues to revolutionalize the fields of tissue engineering, drug discovery, diagnostics and personalized medicine. Microfabrication techniques are being explored for drug delivery applications due to their ability to combine several features such as precise shape and size into a single drug delivery vehicle. They also offer to create unique asymmetrical features incorporated into single or multiple reservoir systems maximizing contact area with the intestinal lining. Combined with intelligent materials, such microfabricated platforms can be designed to be bioadhesive and stimuli-responsive. Apart from drug delivery devices, microfabrication technologies offer exciting opportunities to create biomimetic gastrointestinal tract models incorporating physiological cell types, flow patterns and brush-border like structures. Here we review the recent developments in this field with a focus on the applications of microfabrication in the development of oral drug delivery devices and biomimetic gastrointestinal tract models that can be used to evaluate the drug delivery efficacy. PMID:22166590

  1. Nanotech approaches to drug delivery and imaging.

    PubMed

    Sahoo, Sanjeeb K; Labhasetwar, Vinod

    2003-12-15

    Nanotechnology, a multidisciplinary scientific undertaking, involves creation and utilization of materials, devices or systems on the nanometer scale. The field of nanotechnology is currently undergoing explosive development on many fronts. The technology is expected to create innovations and play a critical role in various biomedical applications, not only in drug delivery, but also in molecular imaging, biomarkers and biosensors. Target-specific drug therapy and methods for early diagnosis of pathologies are the priority research areas where nanotechnology would play a vital role. This review considers different nanotechnology-based drug delivery and imaging approaches, and their economic impact on pharmaceutical and biomedical industries.

  2. Liposome-like Nanostructures for Drug Delivery

    PubMed Central

    Gao, Weiwei; Hu, Che-Ming J.; Fang, Ronnie H.; Zhang, Liangfang

    2013-01-01

    Liposomes are a class of well-established drug carriers that have found numerous therapeutic applications. The success of liposomes, together with recent advancements in nanotechnology, has motivated the development of various novel liposome-like nanostructures with improved drug delivery performance. These nanostructures can be categorized into five major varieties, namely: (1) polymer-stabilized liposomes, (2) nanoparticle-stabilized liposomes, (3) core-shell lipid-polymer hybrid nanoparticles, (4) natural membrane-derived vesicles, and (5) natural membrane coated nanoparticles. They have received significant attention and have become popular drug delivery platforms. Herein, we discuss the unique strengths of these liposome-like platforms in drug delivery, with a particular emphasis on how liposome-inspired novel designs have led to improved therapeutic efficacy, and review recent progress made by each platform in advancing healthcare. PMID:24392221

  3. Brain drug delivery systems for neurodegenerative disorders.

    PubMed

    Garbayo, E; Ansorena, E; Blanco-Prieto, M J

    2012-09-01

    Neurodegenerative disorders (NDs) are rapidly increasing as population ages. However, successful treatments for NDs have so far been limited and drug delivery to the brain remains one of the major challenges to overcome. There has recently been growing interest in the development of drug delivery systems (DDS) for local or systemic brain administration. DDS are able to improve the pharmacological and therapeutic properties of conventional drugs and reduce their side effects. The present review provides a concise overview of the recent advances made in the field of brain drug delivery for treating neurodegenerative disorders. Examples include polymeric micro and nanoparticles, lipidic nanoparticles, pegylated liposomes, microemulsions and nanogels that have been tested in experimental models of Parkinson's, Alzheimer's and Huntington's disease. Overall, the results reviewed here show that DDS have great potential for NDs treatment.

  4. A Molecular Communication System Model for Particulate Drug Delivery Systems.

    PubMed

    Chahibi, Youssef; Pierobon, Massimiliano; Song, Sang Ok; Akyildiz, Ian F

    2013-12-01

    The goal of a drug delivery system (DDS) is to convey a drug where the medication is needed, while, at the same time, preventing the drug from affecting other healthy parts of the body. Drugs composed of micro- or nano-sized particles (particulate DDS) that are able to cross barriers which prevent large particles from escaping the bloodstream are used in the most advanced solutions. Molecular communication (MC) is used as an abstraction of the propagation of drug particles in the body. MC is a new paradigm in communication research where the exchange of information is achieved through the propagation of molecules. Here, the transmitter is the drug injection, the receiver is the drug delivery, and the channel is realized by the transport of drug particles, thus enabling the analysis and design of a particulate DDS using communication tools. This is achieved by modeling the MC channel as two separate contributions, namely, the cardiovascular network model and the drug propagation network. The cardiovascular network model allows to analytically compute the blood velocity profile in every location of the cardiovascular system given the flow input by the heart. The drug propagation network model allows the analytical expression of the drug delivery rate at the targeted site given the drug injection rate. Numerical results are also presented to assess the flexibility and accuracy of the developed model. The study of novel optimization techniques for a more effective and less invasive drug delivery will be aided by this model, while paving the way for novel communication techniques for Intrabody communication networks.

  5. Characterization of particulate drug delivery systems for oral delivery of Peptide and protein drugs.

    PubMed

    Christophersen, Philip Carsten; Fano, Mathias; Saaby, Lasse; Yang, Mingshi; Nielsen, Hanne Mørck; Mu, Huiling

    2015-01-01

    Oral drug delivery is a preferred route because of good patient compliance. However, most peptide/ protein drugs are delivered via parenteral routes because of the absorption barriers in the gastrointestinal (GI) tract such as enzymatic degradation by proteases and low permeability acrossthe biological membranes. To overcome these barriers, different formulation strategies for oral delivery of biomacromolecules have been proposed, including lipid based formulations and polymer-based particulate drug delivery systems (DDS). The aim of this review is to summarize the existing knowledge about oral delivery of peptide/protein drugs and to provide an overview of formulationand characterization strategies. For a better understanding of the challenges in oral delivery of peptide/protein drugs, the composition of GI fluids and the digestion processes of different kinds of excipients in the GI tract are summarized. Additionally, the paper provides an overview of recent studies on characterization of solid drug carriers for peptide/protein drugs, drug distribution in particles, drug release and stability in simulated GI fluids, as well as the absorption of peptide/protein drugs in cell-based models. The use of biorelevant media when applicable can increase the knowledge about the quality of DDS for oral protein delivery. Hopefully, the knowledge provided in this review will aid the establishment of improved biorelevant models capable of forecasting the performance of particulate DDS for oral peptide/protein delivery.

  6. Drug Delivery Research: The Invention Cycle.

    PubMed

    Park, Kinam

    2016-07-05

    Controlled drug delivery systems have been successful in introducing improved formulations for better use of existing drugs and novel delivery of biologicals. The initial success of producing many oral products and some injectable depot formulations, however, reached a plateau, and the progress over the past three decades has been slow. This is likely due to the difficulties of formulating hydrophilic, high molecular weight drugs, such as proteins and nucleic acids, for targeting specific cells, month-long sustained delivery, and pulsatile release. Since the approaches that have served well for delivery of small molecules are not applicable to large molecules, it is time to develop new methods for biologicals. The process of developing future drug delivery systems, termed as the invention cycle, is proposed, and it starts with clearly defining the problems for developing certain formulations. Once the problems are well-defined, creative imagination examines all potential options and selects the best answer and alternatives. Then, innovation takes over to generate unique solutions for developing new formulations that resolve the previously identified problems. Ultimately, the new delivery systems will have to go through a translational process to produce the final formulations for clinical use. The invention cycle also emphasizes examining the reasons for success of certain formulations, not just the reasons for failure of many systems. Implementation of the new invention cycle requires new mechanisms of funding the younger generation of scientists and a new way of identifying their achievements, thereby releasing them from the burden of short-termism.

  7. Emulsion forming drug delivery system for lipophilic drugs.

    PubMed

    Wadhwa, Jyoti; Nair, Anroop; Kumria, Rachna

    2012-01-01

    In the recent years, there is a growing interest in the lipid-based formulations for delivery of lipophilic drugs. Due to their potential as therapeutic agents, preferably these lipid soluble drugs are incorporated into inert lipid carriers such as oils, surfactant dispersions, emulsions, liposomes etc. Among them, emulsion forming drug delivery systems appear to be a unique and industrially feasible approach to overcome the problem of low oral bioavailability associated with the BCS class II drugs. Self-emulsifying formulations are ideally isotropic mixtures of oils, surfactants and co-solvents that emulsify to form fine oil in water emulsions when introduced in aqueous media. Fine oil droplets would pass rapidly from stomach and promote wide distribution of drug throughout the GI tract, thereby overcome the slow dissolution step typically observed with solid dosage forms. Recent advances in drug carrier technologies have promulgated the development of novel drug carriers such as control release self-emulsifying pellets, microspheres, tablets, capsules etc. that have boosted the use of "self-emulsification" in drug delivery. This article reviews the different types of formulations and excipients used in emulsion forming drug delivery system to enhance the bioavailability of lipophilic drugs.

  8. Ocular Drug Delivery; Impact of in vitro Cell Culture Models

    PubMed Central

    Barar, Jaleh; Asadi, Masoud; Mortazavi-Tabatabaei, Seyed Abdolreza; Omidi, Yadollah

    2009-01-01

    Normal vision depends on the optimal function of ocular barriers and intact membranes that selectively regulate the environment of ocular tissues. Novel pharmacotherapeutic modalities have aimed to overcome such biological barriers which impede efficient ocular drug delivery. To determine the impact of ocular barriers on research related to ophthalmic drug delivery and targeting, herein we provide a review of the literature on isolated primary or immortalized cell culture models which can be used for evaluation of ocular barriers. In vitro cell cultures are valuable tools which serve investigations on ocular barriers such as corneal and conjunctival epithelium, retinal pigment epithelium and retinal capillary endothelium, and can provide platforms for further investigations. Ocular barrier-based cell culture systems can be simply set up and used for drug delivery and targeting purposes as well as for pathological and toxicological research. PMID:23198080

  9. Pulmonary drug delivery: a role for polymeric nanoparticles?

    PubMed

    d'Angelo, Ivana; Conte, Claudia; Miro, Agnese; Quaglia, Fabiana; Ungaro, Francesca

    2015-01-01

    Pulmonary drug delivery represents the best way of treating lung diseases, since it allows direct delivery of the drug to the site of action, with few systemic effects. Meanwhile, the lungs may be used as a portal of entry to the body, allowing systemic delivery of drugs via the airway surfaces into the bloodstream. In both cases, the therapeutic effect of the inhaled drug can be optimized by embedding it in appropriately engineered inhalable carriers, which can protect the drug against lung defense mechanisms and promote drug transport across the extracellular and cellular barriers. To this purpose, the attention has been very recently focused on polymeric nanoparticles (NPs). The aim of this review is to offer an overview on the recent advances in NPs for pulmonary drug delivery. After a description of the main challenges encountered in developing novel inhaled products, the design rules to engineer polymeric NPs for inhalation, and in so doing to overcome barriers imposed by the lungs anatomy and physiology, are described. Then, the state-of-art on inhalable biocompatible polymeric NPs based on enzymatically-degradable natural polymers and biodegradable poly(ester)s is presented, with a special focus on NP-based dry powders for inhalation. Finally, the in vitro/in vivo models useful to address the never-ending toxicological debate related to the use of NPs for inhalation are described.

  10. Drug delivery systems for brain tumor therapy.

    PubMed

    Rautioa, Jarkko; Chikhale, Prashant J

    2004-01-01

    Brain tumors are one of the most lethal forms of cancer. They are extremely difficult to treat. Although, the rate of brain tumor incidence is relatively low, the field clearly lacks therapeutic strategies capable of overcoming barriers for effective delivery of drugs to brain tumors. Clinical failure of many potentially effective therapeutics for the treatment of brain tumors is usually not due to a lack of drug potency, but rather can be attributed to shortcomings in the methods by which a drug is delivered to the brain and into brain tumors. In response to the lack of efficacy of conventional drug delivery methods, extensive efforts have been made to develop novel strategies to overcome the obstacles for brain tumor drug delivery. The challenge is to design therapeutic strategies that deliver drugs to brain tumors in a safe and effective manner. This review provides some insight into several potential techniques that have been developed to improve drug delivery to brain tumors, and it should be helpful to clinicians and research scientists as well.

  11. Pulmonary drug delivery. Part II: The role of inhalant delivery devices and drug formulations in therapeutic effectiveness of aerosolized medications

    PubMed Central

    Labiris, N R; Dolovich, M B

    2003-01-01

    Research in the area of pulmonary drug delivery has gathered momentum in the last several years, with increased interest in using the lung as a means of delivering drugs systemically. Advances in device technology have led to the development of more efficient delivery systems capable of delivering larger doses and finer particles into the lung. As more efficient pulmonary delivery devices and sophisticated formulations become available, physicians and health professionals will have a choice of a wide variety of device and formulation combinations that will target specific cells or regions of the lung, avoid the lung's clearance mechanisms and be retained within the lung for longer periods. It is now recognized that it is not enough just to have inhalation therapy available for prescribing; physicians and other healthcare providers need a basic understanding of aerosol science, inhaled formulations, delivery devices, and bioequivalence of products to prescribe these therapies optimally. PMID:14616419

  12. Functional Cyclodextrin Polyrotaxanes for Drug Delivery

    NASA Astrophysics Data System (ADS)

    Yui, Nobuhiko; Katoono, Ryo; Yamashita, Atsushi

    The mobility of cyclodextrins (CDs) threaded onto a linear polymeric chain and the dethreading of the CDs from the chain are the most fascinating features seen in polyrotaxanes. These structural characteristics are very promising for their possible applications in drug delivery. Enhanced multivalent interaction between ligand-receptor systems by using ligand-conjugated polyrotaxanes would be just one of the excellent properties related to the CD mobility. Gene delivery using cytocleavable polyrotaxanes is a more practical but highly crucial issue in drug delivery. Complexation of the polyrotaxanes with DNA and its intracellular DNA release ingeniously utilizes both CD mobility and polyrotaxane dissociation to achieve effective gene delivery. Such a supramolecular approach using CD-containing polyrotaxanes is expected to exploit a new paradigm of biomaterials.

  13. Engineered polymers for advanced drug delivery.

    PubMed

    Kim, Sungwon; Kim, Jong-Ho; Jeon, Oju; Kwon, Ick Chan; Park, Kinam

    2009-03-01

    Engineered polymers have been utilized for developing advanced drug delivery systems. The development of such polymers has caused advances in polymer chemistry, which, in turn, has resulted in smart polymers that can respond to changes in environmental condition such as temperature, pH, and biomolecules. The responses vary widely from swelling/deswelling to degradation. Drug-polymer conjugates and drug-containing nano/micro-particles have been used for drug targeting. Engineered polymers and polymeric systems have also been used in new areas, such as molecular imaging as well as in nanotechnology. This review examines the engineered polymers that have been used as traditional drug delivery systems and as more recent applications in nanotechnology.

  14. Nanoparticles and nanofibers for topical drug delivery

    PubMed Central

    Goyal, Ritu; Macri, Lauren K.; Kaplan, Hilton M.; Kohn, Joachim

    2016-01-01

    This review provides the first comprehensive overview of the use of both nanoparticles and nanofibers for topical drug delivery. Researchers have explored the use of nanotechnology, specifically nanoparticles and nanofibers, as drug delivery systems for topical and transdermal applications. This approach employs increased drug concentration in the carrier, in order to increase drug flux into and through the skin. Both nanoparticles and nanofibers can be used to deliver hydrophobic and hydrophilic drugs and are capable of controlled release for a prolonged period of time. The examples presented provide significant evidence that this area of research has—and will continue to have — a profound impact on both clinical outcomes and the development of new products. PMID:26518723

  15. Engineered Polymers for Advanced Drug Delivery

    PubMed Central

    Kim, Sungwon; Kim, Jong-Ho; Jeon, Oju; Kwon, Ick Chan; Park, Kinam

    2009-01-01

    Engineered polymers have been utilized for developing advanced drug delivery systems. The development of such polymers has caused advances in polymer chemistry, which, in turn, has resulted in smart polymers that can respond to changes in environmental condition, such as temperature, pH, and biomolecules. The responses vary widely from swelling/deswelling to degradation. Drug-polymer conjugates and drug-containing nano/micro-particles have been used for drug targeting. Engineered polymers and polymeric systems have also been used in new areas, such as molecular imaging as well as in nanotechnology. This review examines the engineered polymers that have been used as traditional drug delivery and as more recent applications in nanotechnology. PMID:18977434

  16. Genetically engineered nanocarriers for drug delivery

    PubMed Central

    Shi, Pu; Gustafson, Joshua A; MacKay, J Andrew

    2014-01-01

    Cytotoxicity, low water solubility, rapid clearance from circulation, and off-target side-effects are common drawbacks of conventional small-molecule drugs. To overcome these shortcomings, many multifunctional nanocarriers have been proposed to enhance drug delivery. In concept, multifunctional nanoparticles might carry multiple agents, control release rate, biodegrade, and utilize target-mediated drug delivery; however, the design of these particles presents many challenges at the stage of pharmaceutical development. An emerging solution to improve control over these particles is to turn to genetic engineering. Genetically engineered nanocarriers are precisely controlled in size and structure and can provide specific control over sites for chemical attachment of drugs. Genetically engineered drug carriers that assemble nanostructures including nanoparticles and nanofibers can be polymeric or non-polymeric. This review summarizes the recent development of applications in drug and gene delivery utilizing nanostructures of polymeric genetically engineered drug carriers such as elastin-like polypeptides, silk-like polypeptides, and silk-elastin-like protein polymers, and non-polymeric genetically engineered drug carriers such as vault proteins and viral proteins. PMID:24741309

  17. Nanoparticles in the ocular drug delivery

    PubMed Central

    Zhou, Hong-Yan; Hao, Ji-Long; Wang, Shuang; Zheng, Yu; Zhang, Wen-Song

    2013-01-01

    Ocular drug transport barriers pose a challenge for drug delivery comprising the ocular surface epithelium, the tear film and internal barriers of the blood-aqueous and blood-retina barriers. Ocular drug delivery efficiency depends on the barriers and the clearance from the choroidal, conjunctival vessels and lymphatic. Traditional drug administration reduces the clinical efficacy especially for poor water soluble molecules and for the posterior segment of the eye. Nanoparticles (NPs) have been designed to overcome the barriers, increase the drug penetration at the target site and prolong the drug levels by few internals of drug administrations in lower doses without any toxicity compared to the conventional eye drops. With the aid of high specificity and multifunctionality, DNA NPs can be resulted in higher transfection efficiency for gene therapy. NPs could target at cornea, retina and choroid by surficial applications and intravitreal injection. This review is concerned with recent findings and applications of NPs drug delivery systems for the treatment of different eye diseases. PMID:23826539

  18. Collagen-coated microparticles in drug delivery.

    PubMed

    Sehgal, Praveen Kumar; Srinivasan, Aishwarya

    2009-07-01

    Advantages of drug-incorporated collagen particles have been described for the controlled delivery system for therapeutic actions. The attractiveness of collagen lies in its low immunogenicity and high biocompatibility. It is also recognized by the body as a natural constituent rather than a foreign body. Our research and development efforts are focused towards addressing some of the limitations of collagen, like the high viscosity of an aqueous phase, nondissolution in neutral pH buffers, thermal instability (denaturation) and biodegradability, to make it an ideal material for drug delivery with particular reference to microparticles. These limitations could be overcome by making collagen conjugates with other biomaterials or chemically modifying collagen monomer without affecting its triple helical conformation and maintaining its native properties. This article highlights collagen microparticles' present status as a carrier in drug delivery.

  19. Barriers to drug delivery in solid tumors

    PubMed Central

    Sriraman, Shravan Kumar; Aryasomayajula, Bhawani; Torchilin, Vladimir P

    2014-01-01

    Over the last decade, significant progress has been made in the field of drug delivery. The advent of engineered nanoparticles has allowed us to circumvent the initial limitations to drug delivery such as pharmacokinetics and solubility. However, in spite of significant advances to tumor targeting, an effective treatment strategy for malignant tumors still remains elusive. Tumors possess distinct physiological features which allow them to resist traditional treatment approaches. This combined with the complexity of the biological system presents significant hurdles to the site-specific delivery of therapeutic drugs. One of the key features of engineered nanoparticles is that these can be tailored to execute specific functions. With this review, we hope to provide the reader with a clear understanding and knowledge of biological barriers and the methods to exploit these characteristics to design multifunctional nanocarriers, effect useful dosing regimens and subsequently improve therapeutic outcomes in the clinic. PMID:25068098

  20. Ultrasound-mediated gastrointestinal drug delivery.

    PubMed

    Schoellhammer, Carl M; Schroeder, Avi; Maa, Ruby; Lauwers, Gregory Yves; Swiston, Albert; Zervas, Michael; Barman, Ross; DiCiccio, Angela M; Brugge, William R; Anderson, Daniel G; Blankschtein, Daniel; Langer, Robert; Traverso, Giovanni

    2015-10-21

    There is a significant clinical need for rapid and efficient delivery of drugs directly to the site of diseased tissues for the treatment of gastrointestinal (GI) pathologies, in particular, Crohn's and ulcerative colitis. However, complex therapeutic molecules cannot easily be delivered through the GI tract because of physiologic and structural barriers. We report the use of ultrasound as a modality for enhanced drug delivery to the GI tract, with an emphasis on rectal delivery. Ultrasound increased the absorption of model therapeutics inulin, hydrocortisone, and mesalamine two- to tenfold in ex vivo tissue, depending on location in the GI tract. In pigs, ultrasound induced transient cavitation with negligible heating, leading to an order of magnitude enhancement in the delivery of mesalamine, as well as successful systemic delivery of a macromolecule, insulin, with the expected hypoglycemic response. In a rodent model of chemically induced acute colitis, the addition of ultrasound to a daily mesalamine enema (compared to enema alone) resulted in superior clinical and histological scores of disease activity. In both animal models, ultrasound treatment was well tolerated and resulted in minimal tissue disruption, and in mice, there was no significant effect on histology, fecal score, or tissue inflammatory cytokine levels. The use of ultrasound to enhance GI drug delivery is safe in animals and could augment the efficacy of GI therapies and broaden the scope of agents that could be delivered locally and systemically through the GI tract for chronic conditions such as inflammatory bowel disease.

  1. Ultrasound-mediated gastrointestinal drug delivery

    PubMed Central

    Schoellhammer, Carl M.; Schroeder, Avi; Maa, Ruby; Lauwers, Gregory Yves; Swiston, Albert; Zervas, Michael; Barman, Ross; DiCiccio, Angela M.; Brugge, William R.; Anderson, Daniel G.; Blankschtein, Daniel; Langer, Robert; Traverso, Giovanni

    2016-01-01

    There is a significant clinical need for rapid and efficient delivery of drugs directly to the site of diseased tissues for the treatment of gastrointestinal (GI) pathologies, in particular, Crohn’s and ulcerative colitis. However, complex therapeutic molecules cannot easily be delivered through the GI tract because of physiologic and structural barriers. We report the use of ultrasound as a modality for enhanced drug delivery to the GI tract, with an emphasis on rectal delivery. Ultrasound increased the absorption of model therapeutics inulin, hydrocortisone, and mesalamine two- to tenfold in ex vivo tissue, depending on location in the GI tract. In pigs, ultrasound induced transient cavitation with negligible heating, leading to an order of magnitude enhancement in the delivery of mesalamine, as well as successful systemic delivery of a macromolecule, insulin, with the expected hypoglycemic response. In a rodent model of chemically induced acute colitis, the addition of ultrasound to a daily mesalamine enema (compared to enema alone) resulted in superior clinical and histological scores of disease activity. In both animal models, ultrasound treatment was well tolerated and resulted in minimal tissue disruption, and in mice, there was no significant effect on histology, fecal score, or tissue inflammatory cytokine levels. The use of ultrasound to enhance GI drug delivery is safe in animals and could augment the efficacy of GI therapies and broaden the scope of agents that could be delivered locally and systemically through the GI tract for chronic conditions such as inflammatory bowel disease. PMID:26491078

  2. Liposomes as delivery systems for antineoplastic drugs

    NASA Astrophysics Data System (ADS)

    Medina, Luis Alberto

    2014-11-01

    Liposome drug formulations are defined as pharmaceutical products containing active drug substances encapsulated within the lipid bilayer or in the interior aqueous space of the liposomes. The main importance of this drug delivery system is based on its drastic reduction in systemic dose and concomitant systemic toxicity that in comparison with the free drug, results in an improvement of patient compliance and in a more effective treatment. There are several therapeutic drugs that are potential candidates to be encapsulated into liposomes; particular interest has been focused in therapeutic and antineoplastic drugs, which are characterized for its low therapeutic index and high systemic toxicity. The use of liposomes as drug carriers has been extensively justified and the importance of the development of different formulations or techniques to encapsulate therapeutic drugs has an enormous value in benefit of patients affected by neoplastic diseases.

  3. Light induced drug delivery into cancer cells.

    PubMed

    Shamay, Yosi; Adar, Lily; Ashkenasy, Gonen; David, Ayelet

    2011-02-01

    Cell-penetrating peptides (CPPs) can be used for intracellular delivery of a broad variety of cargoes, including various nanoparticulate pharmaceutical carriers. However, the cationic nature of all CPP sequences, and thus lack of cell specificity, limits their in vivo use for drug delivery applications. Here, we have devised and tested a strategy for site-specific delivery of dyes and drugs into cancer cells by using polymers bearing a light activated caged CPP (cCPP). The positive charge of Lys residues on the minimum sequence of the CPP penetratin ((52)RRMKWKK(58)) was masked with photo-cleavable groups to minimize non-specific adsorption and cellular uptake. Once illuminated by UV light, these protecting groups were cleaved, the positively charged CPP regained its activity and facilitated rapid intracellular delivery of the polymer-dye or polymer-drug conjugates into cancer cells. We have found that a 10-min light illumination time was sufficient to enhance the penetration of the polymer-CPP conjugates bearing the proapoptotic peptide, (D)(KLAKLAK)(2), into 80% of the target cells, and to promote a 'switch' like cytotoxic activity resulting a shift from 100% to 10% in cell viability after 2 h. This report provides an example for tumor targeting by means of light activation of cell-penetrating peptides for intracellular drug delivery.

  4. Zwitterionic drug nanocarriers: a biomimetic strategy for drug delivery.

    PubMed

    Jin, Qiao; Chen, Yangjun; Wang, Yin; Ji, Jian

    2014-12-01

    Nanomaterials self-assembled from amphiphilic functional copolymers have emerged as safe and efficient nanocarriers for delivery of therapeutics. Surface engineering of the nanocarriers is extremely important for the design of drug delivery systems. Bioinspired zwitterions are considered as novel nonfouling materials to construct biocompatible and bioinert nanocarriers. As an alternative to poly(ethylene glycol) (PEG), zwitterions exhibit some unique properties that PEG do not have. In this review, we highlight recent progress of the design of drug nanocarriers using a zwitterionic strategy. The possible mechanism of stealth properties of zwitterions was proposed. The advantages of zwitterionic drug nanocarriers deriving from phosphorylcholine (PC), carboxybetaine (CB), and sulfobetaine (SB) are also discussed.

  5. Transungual drug delivery: current status.

    PubMed

    Elkeeb, Rania; AliKhan, Ali; Elkeeb, Laila; Hui, Xiaoying; Maibach, Howard I

    2010-01-15

    Topical therapy is highly desirable in treating nail disorders due to its localized effects, which results in minimal adverse systemic events and possibly improved adherence. However, the effectiveness of topical therapies is limited by minimal drug permeability through the nail plate. Current research on nail permeation that focuses on altering the nail plate barrier by means of chemical treatments, penetration enhancers as well as physical and mechanical methods is reviewed. A new method of nail sampling is examined. Finally limitations of current ungual drug permeability studies are briefly discussed.

  6. Plasmon resonant liposomes for controlled drug delivery

    NASA Astrophysics Data System (ADS)

    Knights-Mitchell, Shellie S.; Romanowski, Marek

    2015-03-01

    Nanotechnology use in drug delivery promotes a reduction in systemic toxicity, improved pharmacokinetics, and better drug bioavailability. Liposomes continue to be extensively researched as drug delivery systems (DDS) with formulations such as Doxil® and Ambisome® approved by FDA and successfully marketed in the United States. However, the limited ability to precisely control release of active ingredients from these vesicles continues to challenge the broad implementation of this technology. Moreover, the full potential of the carrier to sequester drugs until it can reach its intended target has yet to be realized. Here, we describe a liposomal DDS that releases therapeutic doses of an anticancer drug in response to external stimulus. Earlier, we introduced degradable plasmon resonant liposomes. These constructs, obtained by reducing gold on the liposome surface, facilitate spatial and temporal release of drugs upon laser light illumination that ultimately induces an increase in temperature. In this work, plasmon resonant liposomes have been developed to stably encapsulate and retain doxorubicin at physiological conditions represented by isotonic saline at 37o C and pH 7.4. Subsequently, they are stimulated to release contents either by a 5o C increase in temperature or by laser illumination (760 nm and 88 mW/cm2 power density). Successful development of degradable plasmon resonant liposomes responsive to near-infrared light or moderate hyperthermia can provide a new delivery method for multiple lipophilic and hydrophilic drugs with pharmacokinetic profiles that limit clinical utility.

  7. Drug delivery system and breast cancer cells

    NASA Astrophysics Data System (ADS)

    Colone, Marisa; Kaliappan, Subramanian; Calcabrini, Annarica; Tortora, Mariarosaria; Cavalieri, Francesca; Stringaro, Annarita

    2016-06-01

    Recently, nanomedicine has received increasing attention for its ability to improve the efficacy of cancer therapeutics. Nanosized polymer therapeutic agents offer the advantage of prolonged circulation in the blood stream, targeting to specific sites, improved efficacy and reduced side effects. In this way, local, controlled delivery of the drug will be achieved with the advantage of a high concentration of drug release at the target site while keeping the systemic concentration of the drug low, thus reducing side effects due to bioaccumulation. Various drug delivery systems such as nanoparticles, liposomes, microparticles and implants have been demonstrated to significantly enhance the preventive/therapeutic efficacy of many drugs by increasing their bioavailability and targetability. As these carriers significantly increase the therapeutic effect of drugs, their administration would become less cost effective in the near future. The purpose of our research work is to develop a delivery system for breast cancer cells using a microvector of drugs. These results highlight the potential uses of these responsive platforms suited for biomedical and pharmaceutical applications. At the request of all authors of the paper an updated version was published on 12 July 2016. The manuscript was prepared and submitted without Dr. Francesca Cavalieri's contribution and her name was added without her consent. Her name has been removed in the updated and re-published article.

  8. Tuberculosis chemotherapy: current drug delivery approaches

    PubMed Central

    du Toit, Lisa Claire; Pillay, Viness; Danckwerts, Michael Paul

    2006-01-01

    Tuberculosis is a leading killer of young adults worldwide and the global scourge of multi-drug resistant tuberculosis is reaching epidemic proportions. It is endemic in most developing countries and resurgent in developed and developing countries with high rates of human immunodeficiency virus infection. This article reviews the current situation in terms of drug delivery approaches for tuberculosis chemotherapy. A number of novel implant-, microparticulate-, and various other carrier-based drug delivery systems incorporating the principal anti-tuberculosis agents have been fabricated that either target the site of tuberculosis infection or reduce the dosing frequency with the aim of improving patient outcomes. These developments in drug delivery represent attractive options with significant merit, however, there is a requisite to manufacture an oral system, which directly addresses issues of unacceptable rifampicin bioavailability in fixed-dose combinations. This is fostered by the need to deliver medications to patients more efficiently and with fewer side effects, especially in developing countries. The fabrication of a polymeric once-daily oral multiparticulate fixed-dose combination of the principal anti-tuberculosis drugs, which attains segregated delivery of rifampicin and isoniazid for improved rifampicin bioavailability, could be a step in the right direction in addressing issues of treatment failure due to patient non-compliance. PMID:16984627

  9. Liposomal drug delivery systems--clinical applications.

    PubMed

    Goyal, Parveen; Goyal, Kumud; Vijaya Kumar, Sengodan Gurusamy; Singh, Ajit; Katare, Om Prakash; Mishra, Dina Nath

    2005-03-01

    Liposomes have been widely investigated since 1970 as drug carriers for improving the delivery of therapeutic agents to specific sites in the body. As a result, numerous improvements have been made, thus making this technology potentially useful for the treatment of certain diseases in the clinics. The success of liposomes as drug carriers has been reflected in a number of liposome-based formulations, which are commercially available or are currently undergoing clinical trials. The current pharmaceutical preparations of liposome-based therapeutic systems mainly result from our understanding of lipid-drug interactions and liposome disposition mechanisms. The insight gained from clinical use of liposome drug delivery systems can now be integrated to design liposomes that can be targeted on tissues, cells or intracellular compartments with or without expression of target recognition molecules on liposome membranes. This review is mainly focused on the diseases that have attracted most attention with respect to liposomal drug delivery and have therefore yielded most progress, namely cancer, antibacterial and antifungal disorders. In addition, increased gene transfer efficiencies could be obtained by appropriate selection of the gene transfer vector and mode of delivery.

  10. Biodegradable Hybrid Stomatocyte Nanomotors for Drug Delivery

    PubMed Central

    2017-01-01

    We report the self-assembly of a biodegradable platinum nanoparticle-loaded stomatocyte nanomotor containing both PEG-b-PCL and PEG-b-PS as a potential candidate for anticancer drug delivery. Well-defined stomatocyte structures could be formed even after incorporation of 50% PEG-b-PCL polymer. Demixing of the two polymers was expected at high percentage of semicrystalline poly(ε-caprolactone) (PCL), resulting in PCL domain formation onto the membrane due to different properties of two polymers. The biodegradable motor system was further shown to move directionally with speeds up to 39 μm/s by converting chemical fuel, hydrogen peroxide, into mechanical motion as well as rapidly delivering the drug to the targeted cancer cell. Uptake by cancer cells and fast doxorubicin drug release was demonstrated during the degradation of the motor system. Such biodegradable nanomotors provide a convenient and efficient platform for the delivery and controlled release of therapeutic drugs. PMID:28187254

  11. Biodegradable Hybrid Stomatocyte Nanomotors for Drug Delivery.

    PubMed

    Tu, Yingfeng; Peng, Fei; André, Alain A M; Men, Yongjun; Srinivas, Mangala; Wilson, Daniela A

    2017-02-28

    We report the self-assembly of a biodegradable platinum nanoparticle-loaded stomatocyte nanomotor containing both PEG-b-PCL and PEG-b-PS as a potential candidate for anticancer drug delivery. Well-defined stomatocyte structures could be formed even after incorporation of 50% PEG-b-PCL polymer. Demixing of the two polymers was expected at high percentage of semicrystalline poly(ε-caprolactone) (PCL), resulting in PCL domain formation onto the membrane due to different properties of two polymers. The biodegradable motor system was further shown to move directionally with speeds up to 39 μm/s by converting chemical fuel, hydrogen peroxide, into mechanical motion as well as rapidly delivering the drug to the targeted cancer cell. Uptake by cancer cells and fast doxorubicin drug release was demonstrated during the degradation of the motor system. Such biodegradable nanomotors provide a convenient and efficient platform for the delivery and controlled release of therapeutic drugs.

  12. Intracranial drug delivery for subarachnoid hemorrhage.

    PubMed

    Macdonald, Robert Loch; Leung, Ming; Tice, Tom

    2012-01-01

    Tice and colleagues pioneered site-specific, sustained-release drug delivery to the brain almost 30 years ago. Currently there is one drug approved for use in this manner. Clinical trials in subarachnoid hemorrhage have led to approval of nimodipine for oral and intravenous use, but other drugs, such as clazosentan, hydroxymethylglutaryl CoA reductase inhibitors (statins) and magnesium, have not shown consistent clinical efficacy. We propose that intracranial delivery of drugs such as nimodipine, formulated in sustained-release preparations, are good candidates for improving outcome after subarachnoid hemorrhage because they can be administered to patients that are already undergoing surgery and who have a self-limited condition from which full recovery is possible.

  13. Ingestion of drugs by "parachuting": a unique drug delivery technique.

    PubMed

    Kenerson, Katherine L; Lear-Kaul, Kelly C

    2012-06-01

    "Parachuting" is a technique of drug delivery where medications or illicit drugs are ingested by wrapping the drug of choice in a covering, which then will dissolve or unravel in the gastrointestinal tract, thereby releasing the drug for absorption. Parachuting of drugs can entail crushing of a pill prior to packaging to theoretically increase the surface area for absorption or may involve the packaging of a higher than usual dose of a drug in attempts to attain a sustained-release effect as the "parachute" dissolves or unravels. A case is presented in which a prescription drug abuser known to parachute his medications dies from obstruction of his airway by the inhaled packet. Risks of parachuting any drug would include overdose and fatal toxic effect from the drug itself and adverse effects from the packaging including bowel obstruction or perforation, or airway obstruction.

  14. Convection-enhancement delivery of platinum-based drugs and Lipoplatin(TM) to optimize the concomitant effect with radiotherapy in F98 glioma rat model.

    PubMed

    Shi, Minghan; Fortin, David; Sanche, Léon; Paquette, Benoit

    2015-06-01

    The prognosis for patients with glioblastoma remains poor with current treatments. Although platinum-based drugs are sometimes offered at relapse, their efficacy in this setting is still disputed. In this study, we use convection-enhanced delivery (CED) to deliver the platinum-based drugs (cisplatin, carboplatin, and Lipoplatin(TM) - liposomal formulation of cisplatin) directly into the tumor of F98 glioma-bearing rats that were subsequently treated with γ radiation (15 Gy). CED increased by factors varying between 17 and 111, the concentration of these platinum-based drugs in the brain tumor compared to intra-venous (i.v.) administration, and by 9- to 34-fold, when compared to intra-arterial (i.a.) administration. Furthermore, CED resulted in a better systemic tolerance to platinum drugs compared to their i.a. injection. Among the drugs tested, carboplatin showed the highest maximum tolerated dose (MTD). Treatment with carboplatin resulted in the best median survival time (MeST) (38.5 days), which was further increased by the addition of radiotherapy (54.0 days). Although the DNA-bound platinum adduct were higher at 4 h after CED than 24 h for carboplatin group, combination with radiotherapy led to similar improvement of median survival time. However, less toxicity was observed in animals irradiated 24 h after CED-based chemotherapy. In conclusion, CED increased the accumulation of platinum drugs in tumor, reduced the toxicity, and resulted in a higher median survival time. The best treatment was obtained in animals treated with carboplatin and irradiated 24 h later.

  15. Convection-enhancement delivery of platinum-based drugs and Lipoplatin™ to optimize the concomitant effect with radiotherapy in F98 glioma rat model

    PubMed Central

    Shi, Minghan; Fortin, David; Sanche, Léon; Paquette, Benoit

    2015-01-01

    The prognosis for patients with glioblastoma remains poor with current treatments. Although platinum based drugs are sometimes offered at relapse, their efficacy in this setting is still disputed. In this study, we use convection-enhanced delivery (CED) to deliver the platinum-based drugs (cisplatin, carboplatin, and Lipoplatin™-liposomal formulation of cisplatin) directly into the tumor of F98 glioma-bearing rats that were subsequently treated with γ radiation (15 Gy). CED increased by factors varying between 17 and 111, the concentration of these platinum-based drugs in the brain tumor compared to intra-venous (i.v.) administration, and by 9- to 34-fold, when compared to intra-arterial (i.a.) administration. Furthermore, CED resulted in a better systemic tolerance to platinum drugs compared to their i.a. injection. Among the drugs tested, carboplatin showed the highest maximum tolerated dose (MTD). Treatment with carboplatin resulted in the best median survival time (MeST) (38.5 days), which was further increased by the addition of radiotherapy (54.0 days). Although the DNA-bound platinum adduct were higher at 4 h after CED than 24 h for carboplatin group, combination with radiotherapy led to similar improvement of median survival time. However, less toxicity was observed in animals irradiated 24 h after CED-based chemotherapy. In conclusion, CED increased the accumulation of platinum drugs in tumor, reduced the toxicity, and resulted in a higher median survival time. The best treatment was obtained in animals treated with carboplatin and irradiated 24 h later. PMID:25784204

  16. Drug delivery applications with ethosomes.

    PubMed

    Ainbinder, D; Paolino, D; Fresta, M; Touitou, E

    2010-10-01

    Ethosomes are specially tailored vesicular carriers able to efficiently deliver various molecules with different physicochemical properties into deep skin layers and across the skin. This paper reviews the unique characteristics of the ethosomal carriers, focusing on work carried out with drug containing ethosomal systems in animal models and in clinical studies. The paper concludes with a discussion on the safety of the ethosomal system applications.

  17. Targeted Drug Delivery to Treat Pain and Cerebral Hypoxia

    PubMed Central

    Davis, Thomas P.

    2013-01-01

    Limited drug penetration is an obstacle that is often encountered in treatment of central nervous system (CNS) diseases including pain and cerebral hypoxia. Over the past several years, biochemical characteristics of the brain (i.e., tight junction protein complexes at brain barrier sites, expression of influx and efflux transporters) have been shown to be directly involved in determining CNS permeation of therapeutic agents; however, the vast majority of these studies have focused on understanding those mechanisms that prevent drugs from entering the CNS. Recently, this paradigm has shifted toward identifying and characterizing brain targets that facilitate CNS drug delivery. Such targets include the organic anion–transporting polypeptides (OATPs in humans; Oatps in rodents), a family of sodium-independent transporters that are endogenously expressed in the brain and are involved in drug uptake. OATP/Oatp substrates include drugs that are efficacious in treatment of pain and/or cerebral hypoxia (i.e., opioid analgesic peptides, 3-hydroxy-3-methylglutaryl coenzyme A reductase inhibitors). This clearly suggests that OATP/Oatp isoforms are viable transporter targets that can be exploited for optimization of drug delivery to the brain and, therefore, improved treatment of CNS diseases. This review summarizes recent knowledge in this area and emphasizes the potential that therapeutic targeting of OATP/Oatp isoforms may have in facilitating CNS drug delivery and distribution. Additionally, information presented in this review will point to novel strategies that can be used for treatment of pain and cerebral hypoxia. PMID:23343976

  18. Optically generated ultrasound for enhanced drug delivery

    DOEpatents

    Visuri, Steven R.; Campbell, Heather L.; Da Silva, Luiz

    2002-01-01

    High frequency acoustic waves, analogous to ultrasound, can enhance the delivery of therapeutic compounds into cells. The compounds delivered may be chemotherapeutic drugs, antibiotics, photodynamic drugs or gene therapies. The therapeutic compounds are administered systemically, or preferably locally to the targeted site. Local delivery can be accomplished through a needle, cannula, or through a variety of vascular catheters, depending on the location of routes of access. To enhance the systemic or local delivery of the therapeutic compounds, high frequency acoustic waves are generated locally near the target site, and preferably near the site of compound administration. The acoustic waves are produced via laser radiation interaction with an absorbing media and can be produced via thermoelastic expansion, thermodynamic vaporization, material ablation, or plasma formation. Acoustic waves have the effect of temporarily permeabilizing the membranes of local cells, increasing the diffusion of the therapeutic compound into the cells, allowing for decreased total body dosages, decreased side effects, and enabling new therapies.

  19. Recent Perspectives in Ocular Drug Delivery

    PubMed Central

    Gaudana, Ripal; Jwala, J.; Boddu, Sai H. S.; Mitra, Ashim K.

    2015-01-01

    Anatomy and physiology of the eye makes it a highly protected organ. Designing an effective therapy for ocular diseases, especially for the posterior segment, has been considered as a formidable task. Limitations of topical and intravitreal route of administration have challenged scientists to find alternative mode of administration like periocular routes. Transporter targeted drug delivery has generated a great deal of interest in the field because of its potential to overcome many barriers associated with current therapy. Application of nanotechnology has been very promising in the treatment of a gamut of diseases. In this review, we have briefly discussed several ocular drug delivery systems such as microemulsions, nanosuspensions, nanoparticles, liposomes, niosomes, dendrimers, implants, and hydrogels. Potential for ocular gene therapy has also been described in this article. In near future, a great deal of attention will be paid to develop non-invasive sustained drug release for both anterior and posterior segment eye disorders. A better understanding of nature of ocular diseases, barriers and factors affecting in vivo performance, would greatly drive the development of new delivery systems. Current momentum in the invention of new drug delivery systems hold a promise towards much improved therapies for the treatment of vision threatening disorders. PMID:18758924

  20. Potential new methods for antiepileptic drug delivery.

    PubMed

    Fisher, Robert S; Ho, Jet

    2002-01-01

    Use of novel drug delivery methods could enhance the efficacy and reduce the toxicity of antiepileptic drugs (AEDs). Slow-release oral forms of medication or depot drugs such as skin patches might improve compliance and therefore seizure control. In emergency situations, administration via rectal, nasal or buccal mucosa can deliver the drug more quickly than can oral administration. Slow-release oral forms and rectal forms of AEDs are already approved for use, nasal and buccal administration is currently off-label and skin patches for AEDs are an attractive but currently hypothetical option. Therapies under development may result in the delivery of AEDs directly to the regions of the brain involved in seizures. Experimental protocols are underway to allow continuous infusion of potent excitatory amino acid antagonists into the CSF. In experiments with animal models of epilepsy, AEDs have been delivered successfully to seizure foci in the brain by programmed infusion pumps, acting in response to computerised EEG seizure detection. Inactive prodrugs can be given systemically and activated at the site of the seizure focus by locally released compounds. One such drug under development is DP-VPA (or DP16), which is cleaved to valproic acid (sodium valproate) by phospholipases at the seizure focus. Liposomes and nanoparticles are engineered micro-reservoirs of a drug, with attached antibodies or receptor-specific binding agents designed to target the particles to a specific region of the body. Liposomes in theory could deliver a high concentration of an AED to a seizure focus. Penetration of the blood-brain barrier can be accomplished by linking large particles to iron transferrin or biological toxins that can cross the barrier. In the near future, it is likely that cell transplants that generate neurotransmitters and neuromodulators will accomplish renewable endogenous drug delivery. However, the survival and viability of transplanted cells have yet to be demonstrated

  1. Mucoadhesive drug delivery system: An overview

    PubMed Central

    Boddupalli, Bindu M.; Mohammed, Zulkar N. K.; Nath, Ravinder A.; Banji, David

    2010-01-01

    Mucoadhesive drug delivery systems interact with the mucus layer covering the mucosal epithelial surface, and mucin molecules and increase the residence time of the dosage form at the site of absorption. The drugs which have local action or those which have maximum absorption in gastrointestinal tract (GIT) require increased duration of stay in GIT. Thus, mucoadhesive dosage forms are advantageous in increasing the drug plasma concentrations and also therapeutic activity. In this regard, this review covers the areas of mechanisms and theories of mucoadhesion, factors influencing the mucoadhesive devices and also various mucoadhesive dosage forms. PMID:22247877

  2. Advanced materials and nanotechnology for drug delivery.

    PubMed

    Yan, Li; Yang, Yang; Zhang, Wenjun; Chen, Xianfeng

    2014-08-20

    Many biological barriers are of great importance. For example, stratum corneum, the outmost layer of skin, effectively protects people from being invaded by external microorganisms such as bacteria and viruses. Cell membranes help organisms maintain homeostasis by controlling substances to enter and leave cells. However, on the other hand, these biological barriers seriously restrict drug delivery. For instance, stratum corneum has a very dense structure and only allows very small molecules with a molecular weight of below 500 Da to permeate whereas most drug molecules are much larger than that. A wide variety of drugs including genes needs to enter cells for proper functioning but cell membranes are not permeable to them. To overcome these biological barriers, many drug-delivery routes are being actively researched and developed. In this research news, we will focus on two advanced materials and nanotechnology approaches for delivering vaccines through the skin for painless and efficient immunization and transporting drug molecules to cross cell membranes for high-throughput intracellular delivery.

  3. Oral transmucosal drug delivery for pediatric use.

    PubMed

    Lam, Jenny K W; Xu, Yingying; Worsley, Alan; Wong, Ian C K

    2014-06-01

    The formulation of medicines for children remains a challenge. An ideal pediatric formulation must allow accurate dose administration and be in a dosage form that can be handled by the target age group. It is also important to consider the choices and the amount of excipients used in the formulation for this vulnerable age group. Although oral formulations are generally acceptable to most pediatric patients, they are not suitable for drugs with poor oral bioavailability or when a rapid clinical effect is required. In recent years, oral transmucosal delivery has emerged as an attractive route of administration for pediatric patients. With this route of administration, a drug is absorbed through the oral mucosa, therefore bypassing hepatic first pass metabolism and thus avoiding drug degradation or metabolism in the gastrointestinal tract. The high blood flow and relatively high permeability of the oral mucosa allow a quick onset of action to be achieved. It is a simple and non-invasive route of drug administration. However, there are several barriers that need to be overcome in the development of oral transmucosal products. This article aims to provide a comprehensive review of the current development of oral transmucosal delivery specifically for the pediatric population in order to achieve systemic drug delivery. The anatomical and physiological properties of the oral mucosa of infants and young children are carefully examined. The different dosage forms and formulation strategies that are suitable for young patients are discussed.

  4. Chitosan magnetic nanoparticles for drug delivery systems.

    PubMed

    Assa, Farnaz; Jafarizadeh-Malmiri, Hoda; Ajamein, Hossein; Vaghari, Hamideh; Anarjan, Navideh; Ahmadi, Omid; Berenjian, Aydin

    2016-06-01

    The potential of magnetic nanoparticles (MNPs) in drug delivery systems (DDSs) is mainly related to its magnetic core and surface coating. These coatings can eliminate or minimize their aggregation under physiological conditions. Also, they can provide functional groups for bioconjugation to anticancer drugs and/or targeted ligands. Chitosan, as a derivative of chitin, is an attractive natural biopolymer from renewable resources with the presence of reactive amino and hydroxyl functional groups in its structure. Chitosan nanoparticles (NPs), due to their huge surface to volume ratio as compared to the chitosan in its bulk form, have outstanding physico-chemical, antimicrobial and biological properties. These unique properties make chitosan NPs a promising biopolymer for the application of DDSs. In this review, the current state and challenges for the application magnetic chitosan NPs in drug delivery systems were investigated. The present review also revisits the limitations and commercial impediments to provide insight for future works.

  5. Gelatin carriers for drug and cell delivery in tissue engineering.

    PubMed

    Santoro, Marco; Tatara, Alexander M; Mikos, Antonios G

    2014-09-28

    The ability of gelatin to form complexes with different drugs has been investigated for controlled release applications. Gelatin parameters, such as crosslinking density and isoelectric point, have been tuned in order to optimize gelatin degradation and drug delivery kinetics. In recent years, focus has shifted away from the use of gelatin in isolation toward the modification of gelatin with functional groups and the fabrication of material composites with embedded gelatin carriers. In this review, we highlight some of the latest work being performed in these areas and comment on trends in the field. Specifically, we discuss gelatin modifications for immune system evasion, drug stabilization, and targeted delivery, as well as gelatin composite systems based on ceramics, naturally-occurring polymers, and synthetic polymers.

  6. Nanoengineered drug delivery systems for enhancing antibiotic therapy.

    PubMed

    Kalhapure, Rahul S; Suleman, Nadia; Mocktar, Chunderika; Seedat, Nasreen; Govender, Thirumala

    2015-03-01

    Formulation scientists are recognizing nanoengineered drug delivery systems as an effective strategy to overcome limitations associated with antibiotic drug therapy. Antibiotics encapsulated into nanodelivery systems will contribute to improved management of patients with various infectious diseases and to overcoming the serious global burden of antibiotic resistance. An extensive review of several antibiotic-loaded nanocarriers that have been formulated to target drugs to infectious sites, achieve controlled drug release profiles, and address formulation challenges, such as low-drug entrapment efficiencies, poor solubility and stability is presented in this paper. The physicochemical properties and the in vitro/in vivo performances of various antibiotic-loaded delivery systems, such as polymeric nanoparticles, micelles, dendrimers, liposomes, solid lipid nanoparticles, lipid-polymer hybrid nanoparticles, nanohybirds, nanofibers/scaffolds, nanosheets, nanoplexes, and nanotubes/horn/rods and nanoemulsions, are highlighted and evaluated. Future studies that will be essential to optimize formulation and commercialization of these antibiotic-loaded nanosystems are also identified. The review presented emphasizes the significant formulation progress achieved and potential that novel nanoengineered antibiotic drug delivery systems have for enhancing the treatment of patients with a range of infections.

  7. On-off pulsed oral drug-delivery systems: a possible tool for drug delivery in chronotherapy.

    PubMed

    Tran, Thanh Huyen; Lee, Beom-Jin

    2011-09-01

    Circadian rhythms regulate most body functions and are important factors to consider when administering drugs. The existence of circadian rhythms in nature and their influences on human biological systems have given rise to the concept of chronotherapy, which is the science of delivering drugs in a synchronized manner with the rhythm-dependent circadian variation inherent in the human body. The safety and efficacy of a drug can be improved by matching the peak plasma concentration during a 24 h period of the rhythms. An on-off pulsed (pulsatile or time-controlled) release drug-delivery system offers rapid and transient release; stepwise release; and the sustained release of a certain amount of drug within a short time period after a predetermined off-release period according to the circadian rhythm of disease states. These systems deliver the drug at the right time and at an appropriate dosage and are the best approach for chronotherapy. These systems show promise for the optimal therapy of chronic diseases such as asthma, hypertension, myocardial infarction and arthritis, which show a circadian dependency. Various technologies have been adopted to mimic circadian rhythms in physiological functions and diseases. This review focuses on the basic concept of circadian rhythm, chronotherapy and recent advances in the development of on-off pulsed oral drug-delivery systems for optimal therapy.

  8. A new brain drug delivery strategy: focused ultrasound-enhanced intranasal drug delivery.

    PubMed

    Chen, Hong; Chen, Cherry C; Acosta, Camilo; Wu, Shih-Ying; Sun, Tao; Konofagou, Elisa E

    2014-01-01

    Central nervous system (CNS) diseases are difficult to treat because of the blood-brain barrier (BBB), which prevents most drugs from entering into the brain. Intranasal (i.n.) administration is a promising approach for drug delivery to the brain, bypassing the BBB; however, its application has been restricted to particularly potent substances and it does not offer localized delivery to specific brain sites. Focused ultrasound (FUS) in combination with microbubbles can deliver drugs to the brain at targeted locations. The present study proposed to combine these two different platform techniques (FUS+i.n.) for enhancing the delivery efficiency of intranasally administered drugs at a targeted location. After i.n. administration of 40 kDa fluorescently-labeled dextran as the model drug, FUS targeted at one region within the caudate putamen of mouse brains was applied in the presence of systemically administered microbubbles. To compare with the conventional FUS technique, in which intravenous (i.v.) drug injection is employed, FUS was also applied after i.v. injection of the same amount of dextran in another group of mice. Dextran delivery outcomes were evaluated using fluorescence imaging of brain slices. The results showed that FUS+i.n. enhanced drug delivery within the targeted region compared with that achieved by i.n. only. Despite the fact that the i.n. route has limited drug absorption across the nasal mucosa, the delivery efficiency of FUS+i.n. was not significantly different from that of FUS+i.v.. As a new drug delivery platform, the FUS+i.n. technique is potentially useful for treating CNS diseases.

  9. A New Brain Drug Delivery Strategy: Focused Ultrasound-Enhanced Intranasal Drug Delivery

    PubMed Central

    Chen, Hong; Chen, Cherry C.; Acosta, Camilo; Wu, Shih-Ying; Sun, Tao; Konofagou, Elisa E.

    2014-01-01

    Central nervous system (CNS) diseases are difficult to treat because of the blood-brain barrier (BBB), which prevents most drugs from entering into the brain. Intranasal (IN) administration is a promising approach for drug delivery to the brain, bypassing the BBB; however, its application has been restricted to particularly potent substances and it does not offer localized delivery to specific brain sites. Focused ultrasound (FUS) in combination with microbubbles can deliver drugs to the brain at targeted locations. The present study proposed to combine these two different platform techniques (FUS+IN) for enhancing the delivery efficiency of intranasally administered drugs at a targeted location. After IN administration of 40 kDa fluorescently-labeled dextran as the model drug, FUS targeted at one region within the caudate putamen of mouse brains was applied in the presence of systemically administered microbubbles. To compare with the conventional FUS technique, in which intravenous (IV) drug injection is employed, FUS was also applied after IV injection of the same amount of dextran in another group of mice. Dextran delivery outcomes were evaluated using fluorescence imaging of brain slices. The results showed that FUS+IN enhanced drug delivery within the targeted region compared with that achieved by IN only. Despite the fact that the IN route has limited drug absorption across the nasal mucosa, the delivery efficiency of FUS+IN was not significantly different from that of FUS+IV. As a new drug delivery platform, the FUS+IN technique is potentially useful for treating CNS diseases. PMID:25279463

  10. Ultrasound-Mediated Polymeric Micelle Drug Delivery.

    PubMed

    Xia, Hesheng; Zhao, Yue; Tong, Rui

    2016-01-01

    The synthesis of multi-functional nanocarriers and the design of new stimuli-responsive means are equally important for drug delivery. Ultrasound can be used as a remote, non-invasive and controllable trigger for the stimuli-responsive release of nanocarriers. Polymeric micelles are one kind of potential drug nanocarrier. By combining ultrasound and polymeric micelles, a new modality (i.e., ultrasound-mediated polymeric micelle drug delivery) has been developed and has recently received increasing attention. A major challenge remaining in developing ultrasound-responsive polymeric micelles is the improvement of the sensitivity or responsiveness of polymeric micelles to ultrasound. This chapter reviews the recent advance in this field. In order to understand the interaction mechanism between ultrasound stimulus and polymeric micelles, ultrasound effects, such as thermal effect, cavitation effect, ultrasound sonochemistry (including ultrasonic degradation, ultrasound-initiated polymerization, ultrasonic in-situ polymerization and ultrasound site-specific degradation), as well as basic micellar knowledge are introduced. Ultrasound-mediated polymeric micelle drug delivery has been classified into two main streams based on the different interaction mechanism between ultrasound and polymeric micelles; one is based on the ultrasound-induced physical disruption of the micelle and reversible release of payload. The other is based on micellar ultrasound mechanochemical disruption and irreversible release of payload.

  11. Breast Cancer-Targeted Nuclear Drug Delivery Overcoming Drug Resistance for Breast Cancer Chemotherapy

    DTIC Science & Technology

    2011-09-01

    finished the task 1 - To synthesize and optimize folic-acid- or LHRHfunctionalized charge reversal nanoparticles . The cationic polymer PEI and its block...proposal is to develop nuclear localizing nanoparticles to delivery DNA-toxins breast cancer cell nuclei to effectively overcoming the drug resistance. We...copolymer. This polymer was used to fabricate the nanoparticles . The ideal nanoparticles with optimal sizes and acid-triggered negative-to-positive

  12. ATP-triggered anticancer drug delivery

    NASA Astrophysics Data System (ADS)

    Mo, Ran; Jiang, Tianyue; Disanto, Rocco; Tai, Wanyi; Gu, Zhen

    2014-03-01

    Stimuli-triggered drug delivery systems have been increasingly used to promote physiological specificity and on-demand therapeutic efficacy of anticancer drugs. Here we utilize adenosine-5'-triphosphate (ATP) as a trigger for the controlled release of anticancer drugs. We demonstrate that polymeric nanocarriers functionalized with an ATP-binding aptamer-incorporated DNA motif can selectively release the intercalating doxorubicin via a conformational switch when in an ATP-rich environment. The half-maximal inhibitory concentration of ATP-responsive nanovehicles is 0.24 μM in MDA-MB-231 cells, a 3.6-fold increase in the cytotoxicity compared with that of non-ATP-responsive nanovehicles. Equipped with an outer shell crosslinked by hyaluronic acid, a specific tumour-targeting ligand, the ATP-responsive nanocarriers present an improvement in the chemotherapeutic inhibition of tumour growth using xenograft MDA-MB-231 tumour-bearing mice. This ATP-triggered drug release system provides a more sophisticated drug delivery system, which can differentiate ATP levels to facilitate the selective release of drugs.

  13. Drug Delivery Nanoparticles in Skin Cancers

    PubMed Central

    Dianzani, Chiara; Zara, Gian Paolo; Maina, Giovanni; Pettazzoni, Piergiorgio; Pizzimenti, Stefania; Rossi, Federica; Gigliotti, Casimiro Luca; Ciamporcero, Eric Stefano; Daga, Martina; Barrera, Giuseppina

    2014-01-01

    Nanotechnology involves the engineering of functional systems at nanoscale, thus being attractive for disciplines ranging from materials science to biomedicine. One of the most active research areas of the nanotechnology is nanomedicine, which applies nanotechnology to highly specific medical interventions for prevention, diagnosis, and treatment of diseases, including cancer disease. Over the past two decades, the rapid developments in nanotechnology have allowed the incorporation of multiple therapeutic, sensing, and targeting agents into nanoparticles, for detection, prevention, and treatment of cancer diseases. Nanoparticles offer many advantages as drug carrier systems since they can improve the solubility of poorly water-soluble drugs, modify pharmacokinetics, increase drug half-life by reducing immunogenicity, improve bioavailability, and diminish drug metabolism. They can also enable a tunable release of therapeutic compounds and the simultaneous delivery of two or more drugs for combination therapy. In this review, we discuss the recent advances in the use of different types of nanoparticles for systemic and topical drug delivery in the treatment of skin cancer. In particular, the progress in the treatment with nanocarriers of basal cell carcinoma, squamous cell carcinoma, and melanoma has been reported. PMID:25101298

  14. Transdermal drug delivery: from micro to nano

    NASA Astrophysics Data System (ADS)

    Pegoraro, Carla; MacNeil, Sheila; Battaglia, Giuseppe

    2012-03-01

    Delivery across skin offers many advantages compared to oral or intravenous routes of drug administration. Skin however is highly impermeable to most molecules on the basis of size, hydrophilicity, lipophilicity and charge. For this reason it is often necessary to temporarily alter the barrier properties of skin for effective administration. This can be done by applying chemical enhancers, which alter the lipid structure of the top layer of skin (the stratum corneum, SC), by applying external forces such as electric currents and ultrasounds, by bypassing the stratum corneum via minimally invasive microneedles or by using nano-delivery vehicles that can cross and deliver their payload to the deeper layers of skin. Here we present a critical summary of the latest technologies used to increase transdermal delivery.

  15. Intracarotid Delivery of Drugs: The Potential and the Pitfalls

    PubMed Central

    Joshi, Shailendra; Meyers, Phillip M.; Ornstein, Eugene

    2014-01-01

    The major efforts to selectively deliver drugs to the brain in the last decade have relied on smart molecular techniques to penetrate the blood brain barrier while intraarterial drug delivery has drawn relatively little attention. In the last decade there have been rapid advances in endovascular techniques. Modern endovascular procedures can permit highly targeted drug delivery by intracarotid route. Intracarotid drug delivery can be the primary route of drug delivery or it could be used to facilitate the delivery of smart-neuropharmaceuticals. There have been few attempts to systematically understand the kinetics of intracarotid drugs. Anecdotal data suggests that intracarotid drug delivery is effective in the treatment of cerebral vasospasm, thromboembolic strokes, and neoplasms. Neuroanesthesiologists are frequently involved in the care of such high-risk patients. Therefore, it is necessary to understand the applications of intracarotid drug delivery and the unusual kinetics of intracarotid drugs. PMID:18719453

  16. Biomimetics in drug delivery systems: A critical review.

    PubMed

    Sheikhpour, Mojgan; Barani, Leila; Kasaeian, Alibakhsh

    2017-03-18

    Today, the advanced drug delivery systems have been focused on targeted drug delivery fields. The novel drug delivery is involved with the improvement of the capacity of drug loading in drug carriers, cellular uptake of drug carriers, and the sustained release of drugs within target cells. In this review, six groups of therapeutic drug carriers including biomimetic hydrogels, biomimetic micelles, biomimetic liposomes, biomimetic dendrimers, biomimetic polymeric carriers and biomimetic nanostructures, are studied. The subject takes advantage of the biomimetic methods of productions or the biomimetic techniques for the surface modifications, similar to what accrues in natural cells. Moreover, the effects of these biomimetic approaches for promoting the drug efficiency in targeted drug delivery are visible. The study demonstrates that the fabrication of biomimetic nanocomposite drug carriers could noticeably promote the efficiency of drugs in targeted drug delivery systems.

  17. Soft-Template-Synthesized Mesoporous Carbon for Oral Drug Delivery

    SciTech Connect

    Saha, Dipendu; Warren, Kaitlyn E; Naskar, Amit K

    2014-01-01

    Template-synthesized mesoporous carbons were successfully used in in vitro investigations of controlled delivery of three model drugs, captopril, furosemide, and ranitidine hydrochloride. Captopril and furosemide exhibited desorption kinetics over 30 40 h, and ranitidine HCl had a complete release time of 5 10 h. As evident from the slow release kinetics, we contend that our mesoporous carbon is an improved drug-delivery medium compared to state-of-the-art porous silica-based substrates. The mesoporous carbons, synthesized from phloroglucinol and lignin, a synthetic and a sustainable precursor, respectively, exhibit BET surface area of 200 400 m2 g-1 and pore volume of 0.2 0.6 cm3 g-1. The phloroglucinol-based carbon has narrower pore widths and higher pore volume than the lignin-derived counterpart and maintains a longer release time. Numerical modeling of the release kinetics data reveals that the diffusivities of all the drugs from lignin-based carbon media are of equivalent magnitude (10-22 to 10-24 m2 s-1). However, a tailored reduction of pore width in the sorbent reduces the diffusivity of smaller drug molecules (captopril) by an order of magnitude. Thus, engineered pore morphology in our synthesized carbon sorbent, along with its potential to tailor the chemistry of its interaction with sorbet, can be exploited for optimal delivery system of a preferred drug within its therapeutic level and below the level of toxicity.

  18. Nanotechnology Approaches for Ocular Drug Delivery

    PubMed Central

    Xu, Qingguo; Kambhampati, Siva P.; Kannan, Rangaramanujam M.

    2013-01-01

    Blindness is a major health concern worldwide that has a powerful impact on afflicted individuals and their families, and is associated with enormous socio-economical consequences. The Middle East is heavily impacted by blindness, and the problem there is augmented by an increasing incidence of diabetes in the population. An appropriate drug/gene delivery system that can sustain and deliver therapeutics to the target tissues and cells is a key need for ocular therapies. The application of nanotechnology in medicine is undergoing rapid progress, and the recent developments in nanomedicine-based therapeutic approaches may bring significant benefits to address the leading causes of blindness associated with cataract, glaucoma, diabetic retinopathy and retinal degeneration. In this brief review, we highlight some promising nanomedicine-based therapeutic approaches for drug and gene delivery to the anterior and posterior segments. PMID:23580849

  19. Diatomite silica nanoparticles for drug delivery

    NASA Astrophysics Data System (ADS)

    Ruggiero, Immacolata; Terracciano, Monica; Martucci, Nicola M.; De Stefano, Luca; Migliaccio, Nunzia; Tatè, Rosarita; Rendina, Ivo; Arcari, Paolo; Lamberti, Annalisa; Rea, Ilaria

    2014-07-01

    Diatomite is a natural fossil material of sedimentary origin, constituted by fragments of diatom siliceous skeletons. In this preliminary work, the properties of diatomite nanoparticles as potential system for the delivery of drugs in cancer cells were exploited. A purification procedure, based on thermal treatments in strong acid solutions, was used to remove inorganic and organic impurities from diatomite and to make them a safe material for medical applications. The micrometric diatomite powder was reduced in nanoparticles by mechanical crushing, sonication, and filtering. Morphological analysis performed by dynamic light scattering and transmission electron microscopy reveals a particles size included between 100 and 300 nm. Diatomite nanoparticles were functionalized by 3-aminopropyltriethoxysilane and labeled by tetramethylrhodamine isothiocyanate. Different concentrations of chemically modified nanoparticles were incubated with cancer cells and confocal microscopy was performed. Imaging analysis showed an efficient cellular uptake and homogeneous distribution of nanoparticles in cytoplasm and nucleus, thus suggesting their potentiality as nanocarriers for drug delivery.

  20. Inhalation drug delivery devices: technology update

    PubMed Central

    Ibrahim, Mariam; Verma, Rahul; Garcia-Contreras, Lucila

    2015-01-01

    The pulmonary route of administration has proven to be effective in local and systemic delivery of miscellaneous drugs and biopharmaceuticals to treat pulmonary and non-pulmonary diseases. A successful pulmonary administration requires a harmonic interaction between the drug formulation, the inhaler device, and the patient. However, the biggest single problem that accounts for the lack of desired effect or adverse outcomes is the incorrect use of the device due to lack of training in how to use the device or how to coordinate actuation and aerosol inhalation. This review summarizes the structural and mechanical features of aerosol delivery devices with respect to mechanisms of aerosol generation, their use with different formulations, and their advantages and limitations. A technological update of the current state-of-the-art designs proposed to overcome current challenges of existing devices is also provided. PMID:25709510

  1. Advanced drug delivery approaches against periodontitis.

    PubMed

    Joshi, Deeksha; Garg, Tarun; Goyal, Amit K; Rath, Goutam

    2016-01-01

    Periodontitis is an inflammatory disease of gums involving the degeneration of periodontal ligaments, creation of periodontal pocket and resorption of alveolar bone, resulting in the disruption of the support structure of teeth. According to WHO, 10-15% of the global population suffers from severe periodontitis. The disease results from the growth of a diverse microflora (especially anaerobes) in the pockets and release of toxins, enzymes and stimulation of body's immune response. Various local or systemic approaches were used for an effective treatment of periodontitis. Currently, controlled local drug delivery approach is more favorable as compared to systemic approach because it mainly focuses on improving the therapeutic outcomes by achieving factors like site-specific delivery, low dose requirement, bypass of first-pass metabolism, reduction in gastrointestinal side effects and decrease in dosing frequency. Overall it provides a safe and effective mode of treatment, which enhances patient compliance. Complete eradication of the organisms from the sites was not achieved by using various surgical and mechanical treatments. So a number of polymer-based delivery systems like fibers, films, chips, strips, microparticles, nanoparticles and nanofibers made from a variety of natural and synthetic materials have been successfully tested to deliver a variety of drugs. These systems are biocompatible and biodegradable, completely fill the pockets, and have strong retention on the target site due to excellent mucoadhesion properties. The review summarizes various available and recently developing targeted delivery devices for the treatment of periodontitis.

  2. Microneedle Coating Techniques for Transdermal Drug Delivery

    PubMed Central

    Haj-Ahmad, Rita; Khan, Hashim; Arshad, Muhammad Sohail; Rasekh, Manoochehr; Hussain, Amjad; Walsh, Susannah; Li, Xiang; Chang, Ming-Wei; Ahmad, Zeeshan

    2015-01-01

    Drug administration via the transdermal route is an evolving field that provides an alternative to oral and parenteral routes of therapy. Several microneedle (MN) based approaches have been developed. Among these, coated MNs (typically where drug is deposited on MN tips) are a minimally invasive method to deliver drugs and vaccines through the skin. In this review, we describe several processes to coat MNs. These include dip coating, gas jet drying, spray coating, electrohydrodynamic atomisation (EHDA) based processes and piezoelectric inkjet printing. Examples of process mechanisms, conditions and tested formulations are provided. As these processes are independent techniques, modifications to facilitate MN coatings are elucidated. In summary, the outcomes and potential value for each technique provides opportunities to overcome formulation or dosage form limitations. While there are significant developments in solid degradable MNs, coated MNs (through the various techniques described) have potential to be utilized in personalized drug delivery via controlled deposition onto MN templates. PMID:26556364

  3. Microneedle Coating Techniques for Transdermal Drug Delivery.

    PubMed

    Haj-Ahmad, Rita; Khan, Hashim; Arshad, Muhammad Sohail; Rasekh, Manoochehr; Hussain, Amjad; Walsh, Susannah; Li, Xiang; Chang, Ming-Wei; Ahmad, Zeeshan

    2015-11-05

    Drug administration via the transdermal route is an evolving field that provides an alternative to oral and parenteral routes of therapy. Several microneedle (MN) based approaches have been developed. Among these, coated MNs (typically where drug is deposited on MN tips) are a minimally invasive method to deliver drugs and vaccines through the skin. In this review, we describe several processes to coat MNs. These include dip coating, gas jet drying, spray coating, electrohydrodynamic atomisation (EHDA) based processes and piezoelectric inkjet printing. Examples of process mechanisms, conditions and tested formulations are provided. As these processes are independent techniques, modifications to facilitate MN coatings are elucidated. In summary, the outcomes and potential value for each technique provides opportunities to overcome formulation or dosage form limitations. While there are significant developments in solid degradable MNs, coated MNs (through the various techniques described) have potential to be utilized in personalized drug delivery via controlled deposition onto MN templates.

  4. Nanogel Carrier Design for Targeted Drug Delivery

    PubMed Central

    Eckmann, D. M.; Composto, R. J.; Tsourkas, A.; Muzykantov, V. R.

    2014-01-01

    Polymer-based nanogel formulations offer features attractive for drug delivery, including ease of synthesis, controllable swelling and viscoelasticity as well as drug loading and release characteristics, passive and active targeting, and the ability to formulate nanogel carriers that can respond to biological stimuli. These unique features and low toxicity make the nanogels a favorable option for vascular drug targeting. In this review, we address key chemical and biological aspects of nanogel drug carrier design. In particular, we highlight published studies of nanogel design, descriptions of nanogel functional characteristics and their behavior in biological models. These studies form a compendium of information that supports the scientific and clinical rationale for development of this carrier for targeted therapeutic interventions. PMID:25485112

  5. Injected nanocrystals for targeted drug delivery

    PubMed Central

    Lu, Yi; Li, Ye; Wu, Wei

    2016-01-01

    Nanocrystals are pure drug crystals with sizes in the nanometer range. Due to the advantages of high drug loading, platform stability, and ease of scaling-up, nanocrystals have been widely used to deliver poorly water-soluble drugs. Nanocrystals in the blood stream can be recognized and sequestered as exogenous materials by mononuclear phagocytic system (MPS) cells, leading to passive accumulation in MPS-rich organs, such as liver, spleen and lung. Particle size, morphology and surface modification affect the biodistribution of nanocrystals. Ligand conjugation and stimuli-responsive polymers can also be used to target nanocrystals to specific pathogenic sites. In this review, the progress on injected nanocrystals for targeted drug delivery is discussed following a brief introduction to nanocrystal preparation methods, i.e., top-down and bottom-up technologies. PMID:27006893

  6. Protein and Peptide Drug Delivery: Oral Approaches

    PubMed Central

    Shaji, Jessy; Patole, V.

    2008-01-01

    Till recent, injections remained the most common means for administering therapeutic proteins and peptides because of their poor oral bioavailability. However, oral route would be preferred to any other route because of its high levels of patient acceptance and long term compliance, which increases the therapeutic value of the drug. Designing and formulating a polypeptide drug delivery through the gastro intestinal tract has been a persistent challenge because of their unfavorable physicochemical properties, which includes enzymatic degradation, poor membrane permeability and large molecular size. The main challenge is to improve the oral bioavailability from less than 1% to at least 30-50%. Consequently, efforts have intensified over the past few decades, where every oral dosage form used for the conventional small molecule drugs has been used to explore oral protein and peptide delivery. Various strategies currently under investigation include chemical modification, formulation vehicles and use of enzyme inhibitors, absorption enhancers and mucoadhesive polymers. This review summarizes different pharmaceutical approaches which overcome various physiological barriers that help to improve oral bioavailability that ultimately achieve formulation goals for oral delivery. PMID:20046732

  7. Controlled Ocular Drug Delivery with Nanomicelles

    PubMed Central

    Vaishya, Ravi D.; Khurana, Varun; Patel, Sulabh; Mitra, Ashim K.

    2014-01-01

    Many vision threatening ocular diseases such as age-related macular degeneration (AMD), diabetic retinopathy, glaucoma, and proliferative vitreoretinopathy may result in blindness. Ocular drug delivery specifically to the intraocular tissues remains a challenging task due to the presence of various physiological barriers. Nonetheless, recent advancements in the field of nanomicelle based novel drug delivery system could fulfil these unmet needs. Nanomicelles consists of amphiphilic molecules that self-assemble in aqueous media to form organized supramolecular structures. Micelles can be prepared in various sizes (10 to 1000nm) and shapes depending on the molecular weights of the core and corona forming blocks. Nanomicelles have been an attractive carriers for their potential to solubilize hydrophobic molecules in aqueous solution. In addition, small size in nanometer range and highly modifiable surface properties have been reported to be advantageous in ocular drug delivery. In the present review various factors influencing rationale design of nanomicelles formulation and disposition are discussed along with case studies. Despite the progress in the field, influence of various properties of nanomicelles such as size, shape, surface charge, rigidity of structure on ocular disposition need to be studied in further details to develop an efficient nanocarrier system. PMID:24888969

  8. Ultrasound-mediated nail drug delivery system.

    PubMed

    Abadi, Danielle; Zderic, Vesna

    2011-12-01

    A novel ultrasound-mediated drug delivery system has been developed for treatment of a nail fungal disorder (onychomycosis) by improving delivery to the nail bed using ultrasound to increase the permeability of the nail. The slip-in device consists of ultrasound transducers and drug delivery compartments above each toenail. The device is connected to a computer, where a software interface allows users to select their preferred course of treatment. In in vitro testing, canine nails were exposed to 3 energy levels (acoustic power of 1.2 W and exposure durations of 30, 60, and 120 seconds). A stereo -microscope was used to determine how much of a drug-mimicking compound was delivered through the nail layers by measuring brightness on the cross section of each nail tested at each condition, where brightness level decreases coincide with increases in permeability. Each of the 3 energy levels tested showed statistical significance when compared to the control (P < .05) with a permeability factor of 1.3 after 30 seconds of exposure, 1.3 after 60 seconds, and 1.5 after 120 seconds, where a permeability factor of 1 shows no increase in permeability. Current treatments for onychomycosis include systemic, topical, and surgical. Even when used all together, these treatments typically take a long time to result in nail healing, thus making this ultrasound-mediated device a promising alternative.

  9. A model of axonal transport drug delivery

    NASA Astrophysics Data System (ADS)

    Kuznetsov, Andrey V.

    2012-04-01

    In this paper a model of targeted drug delivery by means of active (motor-driven) axonal transport is developed. The model is motivated by recent experimental research by Filler et al. (A.G. Filler, G.T. Whiteside, M. Bacon, M. Frederickson, F.A. Howe, M.D. Rabinowitz, A.J. Sokoloff, T.W. Deacon, C. Abell, R. Munglani, J.R. Griffiths, B.A. Bell, A.M.L. Lever, Tri-partite complex for axonal transport drug delivery achieves pharmacological effect, Bmc Neuroscience 11 (2010) 8) that reported synthesis and pharmacological efficiency tests of a tri-partite complex designed for axonal transport drug delivery. The developed model accounts for two populations of pharmaceutical agent complexes (PACs): PACs that are transported retrogradely by dynein motors and PACs that are accumulated in the axon at the Nodes of Ranvier. The transitions between these two populations of PACs are described by first-order reactions. An analytical solution of the coupled system of transient equations describing conservations of these two populations of PACs is obtained by using Laplace transform. Numerical results for various combinations of parameter values are presented and their physical significance is discussed.

  10. Challenges and Opportunities in Drug Delivery for Wound Healing

    PubMed Central

    Whittam, Alexander J.; Maan, Zeshaan N.; Duscher, Dominik; Wong, Victor W.; Barrera, Janos A.; Januszyk, Michael; Gurtner, Geoffrey C.

    2016-01-01

    Significance: Chronic wounds remain a significant public health problem. Alterations in normal physiological processes caused by aging or diabetes lead to impaired tissue repair and the development of chronic and nonhealing wounds. Understanding the unique features of the wound environment will be required to develop new therapeutics that impact these disabling conditions. New drug-delivery systems (DDSs) may enhance current and future therapies for this challenging clinical problem. Recent Advances: Historically, physical barriers and biological degradation limited the efficacy of DDSs in wound healing. In aiming at improving and optimizing drug delivery, recent data suggest that combinations of delivery mechanisms, such as hydrogels, small molecules, RNA interference (RNAi), as well as growth factor and stem cell-based therapies (biologics), could offer exciting new opportunities for improving tissue repair. Critical Issues: The lack of effective therapeutic approaches to combat the significant disability associated with chronic wounds has become an area of increasing clinical concern. However, the unique challenges of the wound environment have limited the development of effective therapeutic options for clinical use. Future Directions: New platforms presented in this review may provide clinicians and scientists with an improved understanding of the alternatives for drug delivery in wound care, which may facilitate the development of new therapeutic approaches for patients. PMID:26862465

  11. Drug Delivery to CNS: Challenges and Opportunities with Emphasis on Biomaterials Based Drug Delivery Strategies.

    PubMed

    Khambhla, Ekta; Shah, Viral; Baviskar, Kalpesh

    2016-01-01

    The current epoch has witnessed a lifestyle impregnated with stress, which is a major cause of several neurological disorders. High morbidity and mortality rate due to neurological diseases and disorders have generated a huge social impact. Despite voluminous research, patients suffering from fatal and/or debilitating CNS diseases such as brain tumors, HIV, encephalopathy, Alzheimer's, epilepsy, Parkinson's, migraine and multiple sclerosis outnumbered those suffering from systemic cancer or heart diseases. The brain being a highly sensitive neuronal organ, has evolved with vasculature barriers, which regulates the efflux and influx of substances to CNS. Treatment of CNS diseases/disorders is challenging because of physiologic, metabolic and biochemical obstacles created by these barriers which comprise mainly of BBB and BCFB. The inability of achieving therapeutically active concentration has become the bottleneck level difficulty, hampering the therapeutic efficiency of several promising drug candidates for CNS related disorders. Parallel maturation of an effective CNS drug delivery strategy with CNS drug discovery is the need of the hour. Recently, the focus of the pharmaceutical community has aggravated in the direction of developing novel and more efficient drug delivery systems, giving the potential of more effective and safer CNS therapies. The present review outlines several hurdles in drug delivery to the CNS along with ideal physicochemical properties desired in drug substance/formulation for CNS delivery. The review also focuses on different conventional and novel strategies for drug delivery to the CNS. The article also assesses and emphasizes on possible benefits of biomaterial based formulations for drug delivery to the CNS.

  12. Protein-Based Nanomedicine Platforms for Drug Delivery

    SciTech Connect

    Ma Ham, Aihui; Tang, Zhiwen; Wu, Hong; Wang, Jun; Lin, Yuehe

    2009-08-03

    Drug delivery systems have been developed for many years, however some limitations still hurdle the pace of going to clinical phase, for example, poor biodistribution, drug molecule cytotoxicity, tissue damage, quick clearance from the circulation system, solubility and stability of drug molecules. To overcome the limitations of drug delivery, biomaterials have to be developed and applied to drug delivery to protect the drug molecules and to enhance the drug’s efficacy. Protein-based nanomedicine platforms for drug delivery are platforms comprised of naturally self-assembled protein subunits of the same protein or a combination of proteins making up a complete system. They are ideal for drug delivery platforms due to their biocompatibility and biodegradability coupled with low toxicity. A variety of proteins have been used and characterized for drug delivery systems including the ferritin/apoferritin protein cage, plant derived viral capsids, the small Heat shock protein (sHsp) cage, albumin, soy and whey protein, collagen, and gelatin. There are many different types and shapes that have been prepared to deliver drug molecules using protein-based platforms including the various protein cages, microspheres, nanoparticles, hydrogels, films, minirods and minipellets. There are over 30 therapeutic compounds that have been investigated with protein-based drug delivery platforms for the potential treatment of various cancers, infectious diseases, chronic diseases, autoimmune diseases. In protein-based drug delivery platforms, protein cage is the most newly developed biomaterials for drug delivery and therapeutic applications. Their uniform sizes, multifunctions, and biodegradability push them to the frontier for drug delivery. In this review, the recent strategic development of drug delivery has been discussed with a special emphasis upon the polymer based, especially protein-based nanomedicine platforms for drug delivery. The advantages and disadvantages are also

  13. Phospholipid nanodisc engineering for drug delivery systems.

    PubMed

    Murakami, Tatsuya

    2012-06-01

    Biocompatible mesoscale nanoparticles (5-100 nm in diameter) are attractive tools for drug delivery. Among them are several types of liposomes and polymer micelles already in clinical trial or use. Generally, biocompatibility of such particles is achieved by coating them with polyethylene glycol (PEG). Without PEG coating, particles are quickly trapped in the reticuloendothelial system when intravenously administered. However, recent studies have revealed several potential problems with PEG coating, including antigenicity and restriction of cellular uptake. This has motivated the development of alternative drug and gene delivery vehicles, including chemically and genetically engineered high-density lipoprotein (HDL)-like nanodiscs or "bicelles". HDL is a naturally occurring mesoscale nanoparticle that normally ferries cholesterol around in the body. Its initial "nascent" form is thought to be a simple 10 nm disc of phospholipids in a bilayer, and can be easily synthesized in vitro by mixing recombinant apoA-I proteins with various phospholipids. In this review, the use of synthetic HDL-like phospholipid nanodiscs as biocompatible drug carriers is summarized, focussing on manufacturing, size-control, drug loading and cell targeting.

  14. Silk Electrogel Based Gastroretentive Drug Delivery System

    NASA Astrophysics Data System (ADS)

    Wang, Qianrui

    Gastric cancer has become a global pandemic and there is imperative to develop efficient therapies. Oral dosing strategy is the preferred route to deliver drugs for treating the disease. Recent studies suggested silk electro hydrogel, which is pH sensitive and reversible, has potential as a vehicle to deliver the drug in the stomach environment. The aim of this study is to establish in vitro electrogelation e-gel based silk gel as a gastroretentive drug delivery system. We successfully extended the duration of silk e-gel in artificial gastric juice by mixing silk solution with glycerol at different ratios before the electrogelation. Structural analysis indicated the extended duration was due to the change of beta sheet content. The glycerol mixed silk e-gel had good doxorubicin loading capability and could release doxorubicin in a sustained-release profile. Doxorubicin loaded silk e-gels were applied to human gastric cancer cells. Significant cell viability decrease was observed. We believe that with further characterization as well as functional analysis, the silk e-gel system has the potential to become an effective vehicle for gastric drug delivery applications.

  15. Microemulsions based transdermal drug delivery systems.

    PubMed

    Vadlamudi, Harini C; Narendran, Hyndavi; Nagaswaram, Tejeswari; Yaga, Gowri; Thanniru, Jyotsna; Yalavarthi, Prasanna R

    2014-01-01

    Since the discovery of microemulsions by Jack H Schulman, there has been huge progress made in applying microemulsion systems in plethora of research and industrial process. Microemulsions are optically isotropic systems consisting of water, oil and amphiphile. These systems are beneficial due to their thermodynamic stability, optical clarity, ease of preparation, higher diffusion and absorption rates. Moreover, it has been reported that the ingredients of microemulsion can effectively overcome the diffusion barrier and penetrate through the stratum corneum of the skin. Hence it becomes promising for both transdermal and dermal drug delivery. However, low viscosity of microemulsion restrains its applicability in pharmaceutical industry. To overcome the above drawback, the low viscous microemulsions were added to viscous gel bases to potentiate its applications as topical drug delivery systems so that various drug related toxic effects and erratic drug absorption can be avoided. The present review deals with the microemulsions, various techniques involved in the development of organic nanoparticles. The review emphasized on microemulsion based systems such as hydrogels and organogels. The physicochemical characteristics, mechanical properties, rheological and stability principles involved in microemulsion based viscous gels were also explored.

  16. Recent advances in chitosan-based nanoparticulate pulmonary drug delivery

    NASA Astrophysics Data System (ADS)

    Islam, Nazrul; Ferro, Vito

    2016-07-01

    The advent of biodegradable polymer-encapsulated drug nanoparticles has made the pulmonary route of administration an exciting area of drug delivery research. Chitosan, a natural biodegradable and biocompatible polysaccharide has received enormous attention as a carrier for drug delivery. Recently, nanoparticles of chitosan (CS) and its synthetic derivatives have been investigated for the encapsulation and delivery of many drugs with improved targeting and controlled release. Herein, recent advances in the preparation and use of micro-/nanoparticles of chitosan and its derivatives for pulmonary delivery of various therapeutic agents (drugs, genes, vaccines) are reviewed. Although chitosan has wide applications in terms of formulations and routes of drug delivery, this review is focused on pulmonary delivery of drug-encapsulated nanoparticles of chitosan and its derivatives. In addition, the controversial toxicological effects of chitosan nanoparticles for lung delivery will also be discussed.

  17. Topical Drug Delivery for Chronic Rhinosinusitis

    PubMed Central

    Liang, Jonathan; Lane, Andrew P.

    2013-01-01

    Chronic rhinosinusitis is a multifactorial disorder that may be heterogeneous in presentation and clinical course. While the introduction of endoscopic sinus surgery revolutionized surgical management and has led to significantly improved patient outcomes, medical therapy remains the foundation of long-term care of chronic rhinosinusitis, particularly in surgically recalcitrant cases. A variety of devices and pharmaceutical agents have been developed to apply topical medical therapy to the sinuses, taking advantage of the access provided by endoscopic surgery. The goal of topical therapy is to address the inflammation, infection, and mucociliary dysfunction that underlies the disease. Major factors that impact success include the patient’s sinus anatomy and the dynamics of the delivery device. Despite a growing number of topical treatment options, the evidence-based literature to support their use is limited. In this article, we comprehensively review current delivery methods and the available topical agents. We also discuss biotechnological advances that promise enhanced delivery in the future, and evolving pharmacotherapeutical compounds that may be added to rhinologist’s armamentarium. A complete understand of topical drug delivery is increasingly essential to the management of chronic rhinosinusitis when traditional forms of medical therapy and surgery have failed. PMID:23525506

  18. Designing polymeric microparticulate drug delivery system for hydrophobic drug quercetin

    PubMed Central

    Hazra, Moumita; Dasgupta Mandal, Dalia; Mandal, Tamal; Bhuniya, Saikat; Ghosh, Mallika

    2015-01-01

    The aim of this study was to investigate pharmaceutical potentialities of a polymeric microparticulate drug delivery system for modulating the drug profile of poorly water-soluble quercetin. In this research work two cost effective polymers sodium alginate and chitosan were used for entrapping the model drug quercetin through ionic cross linking method. In vitro drug release, swelling index, drug entrapment efficiency, Fourier Transforms Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Differential Scanning Calorimetric (DSC) studies were also done for physicochemical characterization of the formulations. Swelling index and drug release study were done at a pH of 1.2, 6.8 and 7.4 to evaluate the GI mimetic action which entails that the swelling and release of the all the Formulation1 (F1), Formulation2 (F2) and Formulation3 (F3) at pH 1.2 were minimal confirming the prevention of drug release in the acidic environment of stomach. Comparatively more sustained release was seen from the formulations F2 & F3 at pH 6.8 and pH 7.4 after 7 h of drug release profiling. Drug entrapment efficiency of the formulations shows in F1 (D:C:A = 2:5:30) was approximately 70% whereas the increase in chitosan concentration in F2 (D:C:A = 2:10:30) has shown an entrapment efficiency of 81%. But the comparative further increase of chitosan concentration in F3 (D:C:A = 2:15:30) has shown a entrapment of 80% which is not having any remarkable difference from F2. The FTIR analysis of drug, polymers and the formulations indicated the compatibility of the drug with the polymers. The smoothness of microspheres in F2 & F3 was confirmed by Scanning Electron Microscopy (SEM). However F1 microsphere has shown more irregular shape comparatively. The DSC studies indicated the absence of drug-polymer interaction in the microspheres. Our XRD studies have revealed that when pure drug exhibits crystalline structure with less dissolution profile

  19. Oral Drug Delivery Systems Comprising Altered Geometric Configurations for Controlled Drug Delivery

    PubMed Central

    Moodley, Kovanya; Pillay, Viness; Choonara, Yahya E.; du Toit, Lisa C.; Ndesendo, Valence M. K.; Kumar, Pradeep; Cooppan, Shivaan; Bawa, Priya

    2012-01-01

    Recent pharmaceutical research has focused on controlled drug delivery having an advantage over conventional methods. Adequate controlled plasma drug levels, reduced side effects as well as improved patient compliance are some of the benefits that these systems may offer. Controlled delivery systems that can provide zero-order drug delivery have the potential for maximizing efficacy while minimizing dose frequency and toxicity. Thus, zero-order drug release is ideal in a large area of drug delivery which has therefore led to the development of various technologies with such drug release patterns. Systems such as multilayered tablets and other geometrically altered devices have been created to perform this function. One of the principles of multilayered tablets involves creating a constant surface area for release. Polymeric materials play an important role in the functioning of these systems. Technologies developed to date include among others: Geomatrix® multilayered tablets, which utilizes specific polymers that may act as barriers to control drug release; Procise®, which has a core with an aperture that can be modified to achieve various types of drug release; core-in-cup tablets, where the core matrix is coated on one surface while the circumference forms a cup around it; donut-shaped devices, which possess a centrally-placed aperture hole and Dome Matrix® as well as “release modules assemblage”, which can offer alternating drug release patterns. This review discusses the novel altered geometric system technologies that have been developed to provide controlled drug release, also focusing on polymers that have been employed in such developments. PMID:22312236

  20. [Analysis and test of piezoelectric micropump for drug delivery].

    PubMed

    Kan, Junwu; Xuan, Ming; Yang, Zhigang; Wu, Yihui; Wu, Boda; Cheng, Guangming

    2005-08-01

    With a microsystem or micropump, the release rate of drug delivery is able to be controlled easily to maintain the therapeutic efficacy. A piezoelectric membrane-valve micropump for implantable and carryhome drug delivery system is developed and tested. The influence elements of dynamic performance of the PZT actuator and valve were analyzed, and the calculation method of resonant frequency of the membrane valve was provided. Study results showed that the output performance of the micropump depended on the coupling effect of the actuator and valve. For a given actuator, the output value and the optimal frequency of a micropump could be enhanced only by valve design. Two micropumps with different valve dimensions were fabricated for comparing examination. The smaller -valve micropump obtained higher output values (the maximum flow rate and backpressure being 3.5 ml/min and 27 KPa, respectively) and two optimal frequencies (800 Hz and 3 000 Hz). The larger -valve micropump achieved lower output values (the maximum flow rate and backpressure being 3.0 ml/min and 9 KPa, respectively) and one optimal frequency (about 200 Hz). The test results suggest that the output values and optimal frequency of micropump can be improved by changing the valve dimension, and the viewpoint that checkvalve micropump works only with low acting frequency is wrong.

  1. Ultrasound Molecular Imaging and Drug Delivery.

    PubMed

    Caskey, Charles F

    2017-03-02

    Ultrasound is a rapidly advancing field with many emerging diagnostic and therapeutic applications. For diagnostics, new vascular targets are routinely identified and mature technologies are being translated to humans, while other recent innovations may bring about the creation of acoustic reporter genes and micron-scale resolution with ultrasound. As a cancer therapy, ultrasound is being explored as an adjuvant to immune therapies and to deliver acoustically or thermally active drugs to tumor regions. Ultrasound-enhanced delivery across the blood brain barrier (BBB) could potentially be very impactful for brain cancers and neurodegenerative diseases where the BBB often impedes the delivery of therapeutic molecules. In this minireview, we provide an overview of these topics in the field of ultrasound that are especially relevant to the interests of World Molecular Imaging Society.

  2. Overview on gastroretentive drug delivery systems for improving drug bioavailability.

    PubMed

    Lopes, Carla M; Bettencourt, Catarina; Rossi, Alessandra; Buttini, Francesca; Barata, Pedro

    2016-08-20

    In recent decades, many efforts have been made in order to improve drug bioavailability after oral administration. Gastroretentive drug delivery systems are a good example; they emerged to enhance the bioavailability and effectiveness of drugs with a narrow absorption window in the upper gastrointestinal tract and/or to promote local activity in the stomach and duodenum. Several strategies are used to increase the gastric residence time, namely bioadhesive or mucoadhesive systems, expandable systems, high-density systems, floating systems, superporous hydrogels and magnetic systems. The present review highlights some of the drugs that can benefit from gastroretentive strategies, such as the factors that influence gastric retention time and the mechanism of action of gastroretentive systems, as well as their classification into single and multiple unit systems.

  3. Drug transport and drug delivery--the Midnight Sun meeting.

    PubMed

    Uchegbu, Ijeoma F

    2004-08-01

    The Midnight Sun Meeting on Drug Transport and Drug Delivery was held on the island of Tromso in northern Norway, where the sun does not set for 2 months during the summer. The meeting was hosted by the University of Tromso's newly established Institute of Pharmacy and the Controlled Release Society (Nordic Chapter). The meeting, attended by approximately 80 delegates from across Europe, showcased recent advances in drug transport through biological barriers, solid-state pharmaceuticals and particulate drug delivery systems. This report will focus on the particulate and solid-state pharmaceuticals sessions, in which lectures were given to demonstrate the benefits in cognitive function associated with omega-3 fish oils, the increase in drug release rates observed on the processing-induced deformation of tablet granules, and the size of polymeric particulates being directly and linearly related to the molecular weight of a polymer. The meeting was held as a single-session event, giving delegates the opportunity to attend all presentations. There was a small poster and exhibitor display, and the meeting attracted sponsorship from a number of companies, namely Polypure AS, Weifa AS, ProBioNeutraceuticals AS, Lipoid GmbH, Clavis Pharma AS and Thermometric AB.

  4. [Studies on market of drug delivery system product and drug delivery system of compound Chinese medicine].

    PubMed

    Feng, Yi; Xu, De-Sheng; Hong, Yan-Long; Zhang, Ning; Ma, Yue-Ming

    2006-10-01

    Based on the progress in the world market of drug delivery system (DDS) product and the research profile of DDS of compound Chinese Medicine, The article puts forward a new method of studies on DDS of compound Chinese Medicine. It is expected that the theory of compatibility of compound Chinese Medicine can be shown and its role can be exerted to the largest extent with the application of pharmaceutics technology to change the mode of drug delivery of activated components of compound Chinese Medicine.

  5. Transdermal patch drug delivery interactions with exercise.

    PubMed

    Lenz, Thomas L; Gillespie, Nicole

    2011-03-01

    Transdermal drug delivery systems, such as the transdermal patch, continue to be a popular and convenient way to administer medications. There are currently several medications that use a transdermal patch drug delivery system. This article describes the potential untoward side effects of increased drug absorption through the use of a transdermal patch in individuals who exercise or participate in sporting events. Four studies have been reported that demonstrate a significant increase in the plasma concentration of nitroglycerin when individuals exercise compared with rest. Likewise, several case reports and two studies have been conducted that demonstrate nicotine toxicity and increased plasma nicotine while wearing a nicotine patch in individuals who exercise or participate in sporting events compared with rest. Healthcare providers, trainers and coaches should be aware of proper transdermal patch use, especially while exercising, in order to provide needed information to their respective patients and athletes to avoid potential untoward side effects. Particular caution should be given to individuals who participate in an extreme sporting event of long duration. Further research that includes more medications is needed in this area.

  6. In Situ Forming Polymeric Drug Delivery Systems

    PubMed Central

    Madan, M.; Bajaj, A.; Lewis, S.; Udupa, N.; Baig, J. A.

    2009-01-01

    In situ forming polymeric formulations are drug delivery systems that are in sol form before administration in the body, but once administered, undergo gelation in situ, to form a gel. The formation of gels depends on factors like temperature modulation, pH change, presence of ions and ultra violet irradiation, from which the drug gets released in a sustained and controlled manner. Various polymers that are used for the formulation of in situ gels include gellan gum, alginic acid, xyloglucan, pectin, chitosan, poly(DL-lactic acid), poly(DL-lactide-co-glycolide) and poly-caprolactone. The choice of solvents like water, dimethylsulphoxide, N-methyl pyrrolidone, triacetin and 2-pyrrolidone for these formulations depends on the solubility of polymer used. Mainly in situ gels are administered by oral, ocular, rectal, vaginal, injectable and intraperitoneal routes. The in situ gel forming polymeric formulations offer several advantages like sustained and prolonged action in comparison to conventional drug delivery systems. The article presents a detailed review of these types of polymeric systems, their evaluation, advancements and their commercial formulations. From a manufacturing point of view, the production of such devices is less complex and thus lowers the investment and manufacturing cost. PMID:20490289

  7. Biopolymers as transdermal drug delivery systems in dermatology therapy.

    PubMed

    Basavaraj, K H; Johnsy, George; Navya, M A; Rashmi, R; Siddaramaiah

    2010-01-01

    The skin is considered a complex organ for drug delivery because of its structure. Drug delivery systems are designed for the controlled release of drugs through the skin into the systemic circulation, maintaining consistent efficacy and reducing the dose of the drugs and their related side effects. Transdermal drug delivery represents one of the most rapidly advancing areas of novel drug delivery. The excellent impervious nature of the skin is the greatest challenge that must be overcome for successful drug delivery. Today, polymers have been proven to be successful for long-term drug delivery applications as no single polymer can satisfy all of the requirements. Biopolymers in the field of dermal application are rare and the mechanisms that affect skin absorption are almost unknown. Biopolymers are widely used as drug delivery systems, but as such the use of biopolymers as drug delivery systems in dermatologic therapy is still in progress. Commonly used biopolymers include hydrocolloids, alginates, hydrogels, polyurethane, collagen, poly(lactic-co-glycolic acid), chitosan, proteins and peptides, pectin, siRNAs, and hyaluronic acid. These new and exciting methods for drug delivery are already increasing the number and quality of dermal and transdermal therapies. This article reviews current research on biopolymers and focuses on their potential as drug carriers, particularly in relation to the dermatologic aspects of their use.

  8. Dendrimer based nanotherapeutics for ocular drug delivery

    NASA Astrophysics Data System (ADS)

    Kambhampati, Siva Pramodh

    PAMAM dendrimers are a class of well-defined, hyperbranched polymeric nanocarriers that are being investigated for ocular drug and gene delivery. Their favorable properties such as small size, multivalency and water solubility can provide significant opportunities for many biologically unstable drugs and allows potentially favorable ocular biodistribution. This work exploits hydroxyl terminated dendrimers (G4-OH) as drug/gene delivery vehicles that can target retinal microglia and pigment epithelium via systemic delivery with improved efficacy at much lower concentrations without any side effects. Two different drugs Triamcinolone acetonide (TA) and N-Acetyl Cysteine (NAC) conjugated to G4-OH dendrimers showed tailorable sustained release in physiological relevant solutions and were evaluated in-vitro and in-vivo. Dendrimer-TA conjugates enhanced the solubility of TA and were 100 fold more effective at lower concentrations than free TA in its anti-inflammatory activity in activated microglia and in suppressing VEGF production in hypoxic RPE cells. Dendrimers targeted activated microglia/macrophages and RPE and retained for a period of 21 days in I/R mice model. The relative retention of intravitreal and intravenous dendrimers was comparable, if a 30-fold intravenous dose is used; suggesting intravenous route targeting retinal diseases are possible with dendrimers. D-NAC when injected intravenously attenuated retinal and choroidal inflammation, significantly reduced (˜73%) CNV growth at early stage of AMD in rat model of CNV. A combination therapy of D-NAC + D-TA significantly suppressed microglial activation and promoted CNV regression in late stages of AMD without causing side-effects. G4-OH was modified with linker having minimal amine groups and incorporation of TA as a nuclear localization enhancer resulted in compact gene vectors with favorable safety profile and achieved high levels of transgene expression in hard to transfect human retinal pigment

  9. Laser assisted Drug Delivery: Grundlagen und Praxis.

    PubMed

    Braun, Stephan Alexander; Schrumpf, Holger; Buhren, Bettina Alexandra; Homey, Bernhard; Gerber, Peter Arne

    2016-05-01

    Die topische Applikation von Wirkstoffen ist eine zentrale Therapieoption der Dermatologie. Allerdings mindert die effektive Barrierefunktion der Haut die Bioverfügbarkeit der meisten Externa. Fraktionierte ablative Laser stellen ein innovatives Verfahren dar, um die epidermale Barriere standardisiert, kontaktfrei zu überwinden. Die Bioverfügbarkeit im Anschluss applizierter Externa wird im Sinne einer laser assisted drug delivery (LADD) signifikant gesteigert. Das Prinzip der LADD wird bereits in einigen Bereichen der Dermatologie erfolgreich eingesetzt. Die vorliegende Übersichtsarbeit soll einen Überblick über die aktuellen aber auch perspektivischen Einsatzmöglichkeiten der LADD bieten.

  10. Biomedical Imaging in Implantable Drug Delivery Systems

    PubMed Central

    Zhou, Haoyan; Hernandez, Christopher; Goss, Monika; Gawlik, Anna; Exner, Agata A.

    2015-01-01

    Implantable drug delivery systems (DDS) provide a platform for sustained release of therapeutic agents over a period of weeks to months and sometimes years. Such strategies are typically used clinically to increase patient compliance by replacing frequent administration of drugs such as contraceptives and hormones to maintain plasma concentration within the therapeutic window. Implantable or injectable systems have also been investigated as a means of local drug administration which favors high drug concentration at a site of interest, such as a tumor, while reducing systemic drug exposure to minimize unwanted side effects. Significant advances in the field of local DDS have led to increasingly sophisticated technology with new challenges including quantification of local and systemic pharmacokinetics and implant-body interactions. Because many of these sought-after parameters are highly dependent on the tissue properties at the implantation site, and rarely represented adequately with in vitro models, new nondestructive techniques that can be used to study implants in situ are highly desirable. Versatile imaging tools can meet this need and provide quantitative data on morphological and functional aspects of implantable systems. The focus of this review article is an overview of current biomedical imaging techniques, including magnetic resonance imaging (MRI), ultrasound imaging, optical imaging, X-ray and computed tomography (CT), and their application in evaluation of implantable DDS. PMID:25418857

  11. Light activated liposomes: Functionality and prospects in ocular drug delivery.

    PubMed

    Lajunen, Tatu; Nurmi, Riikka; Kontturi, Leena; Viitala, Lauri; Yliperttula, Marjo; Murtomäki, Lasse; Urtti, Arto

    2016-12-28

    Ocular drug delivery, especially to the retina and choroid, is a major challenge in drug development. Liposome technology may be useful in ophthalmology in enabling new routes of delivery, prolongation of drug action and intracellular drug delivery, but drug release from the liposomes should be controlled. For that purpose, light activation may be an approach to release drug at specified time and site in the eye. Technical advances have been made in the field of light activated drug release, particularly indocyanine green loaded liposomes are a promising approach with safe materials and effective light triggered release of small and large molecules. This review discusses the liposomal drug delivery with light activated systems in the context of ophthalmic drug delivery challenges.

  12. Functionalized mesoporous silicon for targeted-drug-delivery.

    PubMed

    Tabasi, Ozra; Falamaki, Cavus; Khalaj, Zahra

    2012-10-01

    The present work concerns a preliminary step in the production of anticancer drug loaded porous silicon (PSi) for targeted-drug-delivery applications. A successful procedure for the covalent attachment of folic acid, polyethylene glycol (PEG) and doxorubicin to hydrophilic mesoporous silicon layers is presented. A systematic approach has been followed to obtain the optimal composition of the N,N'-dicyclohexylcarbodiimide (DCC)/N-hydroxysuccimide (NHS) in dimethylsulfoxide (DMSO) solution for the surface activation process of the undecylenic acid (UD) grafted molecules to take place with minimal undesired byproduct formation. The effect of reactant concentration and kind of solvent (aqueous or DMSO) on the attachment of folic acid to the activated PSi layer has been investigated. The covalent attachment of the doxorubicin molecules to the PSi layer functionalized with folic acid and PEG is discussed. The drug release kinetics as a function of pH has been studied. The functionalized PSi particles show a high cytotoxicity compared to the equivalent amount of free drug. Cell toxicity tests show clearly that the incorporation of folate molecules increases substantially the toxicity of the loaded PSi particles. Accordingly this new functionalized PSi may be considered a proper candidate for targeted drug delivery.

  13. Implantable microchip: the futuristic controlled drug delivery system.

    PubMed

    Sutradhar, Kumar Bishwajit; Sumi, Chandra Datta

    2016-01-01

    There is no doubt that controlled and pulsatile drug delivery system is an important challenge in medicine over the conventional drug delivery system in case of therapeutic efficacy. However, the conventional drug delivery systems often offer a limited by their inability to drug delivery which consists of systemic toxicity, narrow therapeutic window, complex dosing schedule for long term treatment etc. Therefore, there has been a search for the drug delivery system that exhibit broad enhancing activity for more drugs with less complication. More recently, some elegant study has noted that, a new type of micro-electrochemical system or MEMS-based drug delivery systems called microchip has been improved to overcome the problems related to conventional drug delivery. Moreover, micro-fabrication technology has enabled to develop the implantable controlled released microchip devices with improved drug administration and patient compliance. In this article, we have presented an overview of the investigations on the feasibility and application of microchip as an advanced drug delivery system. Commercial manufacturing materials and methods, related other research works and current advancement of the microchips for controlled drug delivery have also been summarized.

  14. Ultrasound-Propelled Nanocups for Drug Delivery

    PubMed Central

    Kwan, James J; Myers, Rachel; Coviello, Christian M; Graham, Susan M; Shah, Apurva R; Stride, Eleanor; Carlisle, Robert C; Coussios, Constantin C

    2015-01-01

    Ultrasound-induced bubble activity (cavitation) has been recently shown to actively transport and improve the distribution of therapeutic agents in tumors. However, existing cavitation-promoting agents are micron-sized and cannot sustain cavitation activity over prolonged time periods because they are rapidly destroyed upon ultrasound exposure. A novel ultrasound-responsive single-cavity polymeric nanoparticle (nanocup) capable of trapping and stabilizing gas against dissolution in the bloodstream is reported. Upon ultrasound exposure at frequencies and intensities achievable with existing diagnostic and therapeutic systems, nanocups initiate and sustain readily detectable cavitation activity for at least four times longer than existing microbubble constructs in an in vivo tumor model. As a proof-of-concept of their ability to enhance the delivery of unmodified therapeutics, intravenously injected nanocups are also found to improve the distribution of a freely circulating IgG mouse antibody when the tumor is exposed to ultrasound. Quantification of the delivery distance and concentration of both the nanocups and coadministered model therapeutic in an in vitro flow phantom shows that the ultrasound-propelled nanocups travel further than the model therapeutic, which is itself delivered to hundreds of microns from the vessel wall. Thus nanocups offer considerable potential for enhanced drug delivery and treatment monitoring in oncological and other biomedical applications. PMID:26296985

  15. Convection-enhanced drug delivery for gliomas

    PubMed Central

    Healy, Andrew T.; Vogelbaum, Michael A.

    2015-01-01

    In spite of aggressive multi-modality treatments, patients diagnosed with anaplastic astrocytoma and glioblastoma continue to display poor median survival. The success of our current conventional and targeted chemotherapies are largely hindered by systemic- and neurotoxicity, as well as poor central nervous system (CNS) penetration. Interstitial drug administration via convection-enhanced delivery (CED) is an alternative that potentially overcomes systemic toxicities and CNS delivery issues by directly bypassing the blood–brain barrier (BBB). This novel approach not only allows for directed administration, but also allows for newer, tumor-selective agents, which would normally be excluded from the CNS due to molecular size alone. To date, randomized trials of CED therapy have yet to definitely show survival advantage as compared with today's standard of care, however, early studies appear to have been limited by “first generation” delivery techniques. Taking into consideration lessons learned from early trials along with decades of research, newer CED technologies and therapeutic agents are emerging, which are reviewed herein. PMID:25722934

  16. Challenges in modelling nanoparticles for drug delivery.

    PubMed

    Barnard, Amanda S

    2016-01-20

    Although there have been significant advances in the fields of theoretical condensed matter and computational physics, when confronted with the complexity and diversity of nanoparticles available in conventional laboratories a number of modeling challenges remain. These challenges are generally shared among application domains, but the impacts of the limitations and approximations we make to overcome them (or circumvent them) can be more significant one area than another. In the case of nanoparticles for drug delivery applications some immediate challenges include the incompatibility of length-scales, our ability to model weak interactions and solvation, the complexity of the thermochemical environment surrounding the nanoparticles, and the role of polydispersivity in determining properties and performance. Some of these challenges can be met with existing technologies, others with emerging technologies including the data-driven sciences; some others require new methods to be developed. In this article we will briefly review some simple methods and techniques that can be applied to these (and other) challenges, and demonstrate some results using nanodiamond-based drug delivery platforms as an exemplar.

  17. Light-sensitive intelligent drug delivery systems.

    PubMed

    Alvarez-Lorenzo, Carmen; Bromberg, Lev; Concheiro, Angel

    2009-01-01

    Drug delivery systems (DDS) capable of releasing an active molecule at the appropriate site and at a rate that adjusts in response to the progression of the disease or to certain functions/biorhythms of the organism are particularly appealing. Biocompatible materials sensitive to certain physiological variables or external physicochemical stimuli (intelligent materials) can be used for achieving this aim. Light-responsiveness is receiving increasing attention owing to the possibility of developing materials sensitive to innocuous electromagnetic radiation (mainly in the UV, visible and near-infrared range), which can be applied on demand at well delimited sites of the body. Some light-responsive DDS are of a single use (i.e. the light triggers an irreversible structural change that provokes the delivery of the entire dose) while others able to undergo reversible structural changes when cycles of light/dark are applied, behave as multi-switchable carriers (releasing the drug in a pulsatile manner). In this review, the mechanisms used to develop polymeric micelles, gels, liposomes and nanocomposites with light-sensitiveness are analyzed. Examples of the capability of some polymeric, lipidic and inorganic structures to regulate the release of small solutes and biomacromolecules are presented and the potential of light-sensitive carriers as functional components of intelligent DDS is discussed.

  18. Collagen interactions: Drug design and delivery.

    PubMed

    An, Bo; Lin, Yu-Shan; Brodsky, Barbara

    2016-02-01

    Collagen is a major component in a wide range of drug delivery systems and biomaterial applications. Its basic physical and structural properties, together with its low immunogenicity and natural turnover, are keys to its biocompatibility and effectiveness. In addition to its material properties, the collagen triple-helix interacts with a large number of molecules that trigger biological events. Collagen interactions with cell surface receptors regulate many cellular processes, while interactions with other ECM components are critical for matrix structure and remodeling. Collagen also interacts with enzymes involved in its biosynthesis and degradation, including matrix metalloproteinases. Over the past decade, much information has been gained about the nature and specificity of collagen interactions with its partners. These studies have defined collagen sequences responsible for binding and the high-resolution structures of triple-helical peptides bound to its natural binding partners. Strategies to target collagen interactions are already being developed, including the use of monoclonal antibodies to interfere with collagen fibril formation and the use of triple-helical peptides to direct liposomes to melanoma cells. The molecular information about collagen interactions will further serve as a foundation for computational studies to design small molecules that can interfere with specific interactions or target tumor cells. Intelligent control of collagen biological interactions within a material context will expand the effectiveness of collagen-based drug delivery.

  19. Challenges in modelling nanoparticles for drug delivery

    NASA Astrophysics Data System (ADS)

    Barnard, Amanda S.

    2016-01-01

    Although there have been significant advances in the fields of theoretical condensed matter and computational physics, when confronted with the complexity and diversity of nanoparticles available in conventional laboratories a number of modeling challenges remain. These challenges are generally shared among application domains, but the impacts of the limitations and approximations we make to overcome them (or circumvent them) can be more significant one area than another. In the case of nanoparticles for drug delivery applications some immediate challenges include the incompatibility of length-scales, our ability to model weak interactions and solvation, the complexity of the thermochemical environment surrounding the nanoparticles, and the role of polydispersivity in determining properties and performance. Some of these challenges can be met with existing technologies, others with emerging technologies including the data-driven sciences; some others require new methods to be developed. In this article we will briefly review some simple methods and techniques that can be applied to these (and other) challenges, and demonstrate some results using nanodiamond-based drug delivery platforms as an exemplar.

  20. A microneedle roller for transdermal drug delivery.

    PubMed

    Park, Jung-Hwan; Choi, Seong-O; Seo, Soonmin; Choy, Young Bin; Prausnitz, Mark R

    2010-10-01

    Microneedle rollers have been used to treat large areas of skin for cosmetic purposes and to increase skin permeability for drug delivery. In this study, we introduce a polymer microneedle roller fabricated by inclined rotational UV lithography, replicated by micromolding hydrophobic polylactic acid and hydrophilic carboxy-methyl-cellulose. These microneedles created micron-scale holes in human and porcine cadaver skin that permitted entry of acetylsalicylic acid, Trypan blue and nanoparticles measuring 50nm and 200nm in diameter. The amount of acetylsalicylic acid delivered increased with the number of holes made in the skin and was 1-2 orders of magnitude greater than in untreated skin. Lateral diffusion in the skin between holes made by microneedles followed expected diffusional kinetics, with effective diffusivity values that were 23-160 times smaller than in water. Compared to inserting microneedles on a flat patch, the sequential insertion of microneedles row by row on a roller required less insertion force in full-thickness porcine skin. Overall, polymer microneedle rollers, prepared from replicated polymer films, offer a simple way to increase skin permeability for drug delivery.

  1. Polymeric micelles for acyclovir drug delivery.

    PubMed

    Sawdon, Alicia J; Peng, Ching-An

    2014-10-01

    Polymeric prodrug micelles for delivery of acyclovir (ACV) were synthesized. First, ACV was used directly to initiate ring-opening polymerization of ɛ-caprolactone to form ACV-polycaprolactone (ACV-PCL). Through conjugation of hydrophobic ACV-PCL with hydrophilic methoxy poly(ethylene glycol) (MPEG) or chitosan, polymeric micelles for drug delivery were formed. (1)H NMR, FTIR, and gel permeation chromatography were employed to show successful conjugation of MPEG or chitosan to hydrophobic ACV-PCL. Through dynamic light scattering, zeta potential analysis, transmission electron microscopy, and critical micelle concentration (CMC), the synthesized ACV-tagged polymeric micelles were characterized. It was found that the average size of the polymeric micelles was under 200nm and the CMCs of ACV-PCL-MPEG and ACV-PCL-chitosan were 2.0mgL(-1) and 6.6mgL(-1), respectively. The drug release kinetics of ACV was investigated and cytotoxicity assay demonstrates that ACV-tagged polymeric micelles were non-toxic.

  2. Nanocarriers Usage for Drug Delivery in Cancer Therapy

    PubMed Central

    Khodabandehloo, Hadi; Zahednasab, Hamid; Ashrafi Hafez, Asghar

    2016-01-01

    Conventional therapeutic agents have displayed significant shortcomings. For this reason, important achievements have effectively made in biotechnology for delivering the therapeutic agents to the site of action, and diminish side effects. Polymeric carriers, micelles, dendrimers, liposomes, solid lipid carriers, gold carriers, viral carriers, nanotubes and magnetic carriers incorporating cytotoxic therapeutics have developed. To improve biological distribution of therapeutic drugs, some modified carriers have designed in optimal size and modified surface area. Delivery of carriers to target cells could be done by passive and active targeting. PMID:27482328

  3. Smart Nanoparticles for Drug Delivery: Boundaries and Opportunities

    PubMed Central

    Lee, Byung Kook; Yun, Yeon Hee; Park, Kinam

    2014-01-01

    Various pharmaceutical particles have been used in developing different drug delivery systems ranging from traditional tablets to state-of-the-art nanoparticle formulations. Nanoparticle formulations are unique in that the small size with huge surface area sometimes provides unique properties that larger particles and bulk materials do not have. Nanoparticle formulations have been used in improving the bioavailability of various drugs, in particular, poorly soluble drugs. Nanoparticle drug delivery systems have found their unique applications in targeted drug delivery to tumors. While nanoparticle formulations have been successful in small animal xenograft models, their translation to clinical applications has been very rare. Developing nanoparticle systems designed for targeted drug delivery, e.g., treating tumors in humans, requires clear understanding of the uniqueness of nanoparticles, as well as limitations and causes of failures in clinical applications. It also requires designing novel smart nanoparticle delivery systems that can increase the drug bioavailability and at the same time reduce the drug's side effects. PMID:25684780

  4. Antibody Drug Conjugate Bioinformatics: Drug Delivery through the Letterbox

    PubMed Central

    Vlachakis, Dimitrios

    2013-01-01

    Antibodies appear to be the first line of defence in the adaptive immune response of vertebrates and thereby are involved in a multitude of biochemical mechanisms, such as regulation of infection, autoimmunity, and cancer. It goes without saying that a full understanding of antibody function is required for the development of novel antibody-interacting drugs. These drugs are the Antibody Drug Conjugates (ADCs), which are a new type of targeted therapy, used for example for cancer. They consist of an antibody (or antibody fragment such as a single-chain variable fragment [scFv]) linked to a payload drug (often cytotoxic). Because of the targeting, the side effects should be lower and give a wider therapeutic window. Overall, the underlying principle of ADCs is to discern the delivery of a drug that is cytotoxic to a target that is cancerous, hoping to increase the antitumoural potency of the original drug by reducing adverse effects and side effects, such as toxicity of the cancer target. This is a pioneering field that employs state-of-the-art computational and molecular biology methods in the fight against cancer using ADCs. PMID:23853668

  5. Nanoscale coordination polymers for anticancer drug delivery

    NASA Astrophysics Data System (ADS)

    Phillips, Rachel Huxford

    This dissertation reports the synthesis and characterization of nanoscale coordination polymers (NCPs) for anticancer drug delivery. Nanoparticles have been explored in order to address the limitations of small molecule chemotherapeutics. NCPs have been investigated as drug delivery vehicles as they can exhibit the same beneficial properties as the bulk metal-organic frameworks as well as interesting characteristics that are unique to nanomaterials. Gd-MTX (MTX = methotrexate) NCPs with a MTX loading of 71.6 wt% were synthesized and stabilized by encapsulation within a lipid bilayer containing anisamide (AA), a small molecule that targets sigma receptors which are overexpressed in many cancer tissues. Functionalization with AA allows for targeted delivery and controlled release to cancer cells, as shown by enhanced efficacy against leukemia cells. The NCPs were doped with Ru(bpy)32+ (bpy = 2,2'-bipyridine), and this formulation was utilized as an optical imaging agent by confocal microscopy. NCPs containing the chemotherapeutic pemetrexed (PMX) were synthesized using different binding metals. Zr-based materials could not be stabilized by encapsulation with a lipid bilayer, and Gd-based materials showed that PMX had degraded during synthesis. However, Hf-based NCPs containing 19.7 wt% PMX were stabilized by a lipid coating and showed in vitro efficacy against non-small cell lung cancer (NSCLC) cell lines. Enhanced efficacy was observed for formulations containing AA. Additionally, NCP formulations containing the cisplatin prodrug disuccinatocisplatin were prepared; one of these formulations could be stabilized by encapsulation within a lipid layer. Coating with a lipid layer doped with AA rendered this formulation an active targeting agent. The resulting formulation proved more potent than free cisplatin in NSCLC cell lines. Improved NCP uptake was demonstrated by confocal microscopy and competitive binding assays. Finally, a Pt(IV) oxaliplatin prodrug was

  6. [Research on intelligent controlled drug delivery with polymer].

    PubMed

    Zhang, Zhibin; Tang, Changwei; Chen, Huiqing; Shan, Lianhai; Wan, Changxiu

    2006-02-01

    The intelligent controlled drug delivery systems are a series of the preparations including microcapsules or nanocapsules composed of intelligent polymers and medication. The properties of preparations can change with the external stimuli such as pH value, temperature, chemical substance, light, electricity and magnetism. According to this properties, the drug delivery can be intelligently controlled. This paper has reviewed research on syntheses and applications of intelligent controlled drug delivery systems with polymers.

  7. Dendrimeric micelles for controlled drug release and targeted delivery

    PubMed Central

    Ambade, Ashootosh V.; Savariar, Elamprakash N.; Thayumanavan, S.

    2008-01-01

    This review highlights the developments in dendrimer-based micelles for drug delivery. Dendrimers, the perfectly branched monodisperse macromolecules, have certain structural advantages that make them attractive candidates as drug carriers for controlled release or targeted delivery. As polymeric micelle-based approaches precede the work in dendrimers, these are also discussed briefly. The review concludes with a perspective on possible applications of biaryl-based dendrimeric micelles that exhibit environment-dependent conformations, in drug delivery. PMID:16053329

  8. Engineering bioceramic microstructure for customized drug delivery

    NASA Astrophysics Data System (ADS)

    Pacheco Gomez, Hernando Jose

    One of the most efficient approaches to treat cancer and infection is to use biomaterials as a drug delivery system (DDS). The goal is for the material to provide a sustained release of therapeutic drug dose locally to target the ill tissue without affecting other organs. Silica Calcium Phosphate nano composite (SCPC) is a drug delivery platform that successfully demonstrated the ability to bind and release several therapeutics including antibiotics, anticancer drugs, and growth factors. The aim of the present work is to analyze the role of SCPC microstructure on drug binding and release kinetics. The main crystalline phases of SCPC are alpha-cristobalite (SiO2, Cris) and beta-rhenanite (NaCaPO4, Rhe); therefore, these two phases were prepared and characterized separately. Structural and compositional features of Cris, Rhe and SCPC bioceramics demonstrated a significant influence on the loading capacity and release kinetics profile of Vancomycin (Vanc) and Cisplatin (Cis). Fourier Transform Infrared (FTIR) spectroscopy analyses demonstrated that the P-O functional group in Rhe and SCPC has high affinity to the (C=O and N-H) of Vanc and (N-H and O-H) of Cis. By contrast, a weak chemical interaction between the Si-O functional group in Cris and SCPC and the two drugs was observed. Vanc loading per unit surface area increased in the order 8.00 microg Vanc/m2 for Rhe > 4.49 microg Vanc /m2 for SCPC>3.01 microg Vanc /m2 for Cris (p<0.05). Cis loading capacity increased in the order 8.59 microg Vanc /m2 for Cris, 17.8 microg Vanc/m2 for Rhe and 6.03 microg Vanc /m2 for SCPC (p<0.05). Drug release kinetics was dependent on the carrier as well as on the kind of drug. Different burst release and sustained release rates were measured for Vanc and Cis from the same carrier. The percentages of drug amount released from Cris, Rhe and SCPC during the burst stage (the first 2h) were: 50%, 50%, and 46% of Vanc; and 53.4%, 36.6%, and 30.6 % of Cis, respectively. Burst release was

  9. Polymeric carriers: role of geometry in drug delivery

    PubMed Central

    Simone, Eric A; Dziubla, Thomas D; Muzykantov, Vladimir R

    2009-01-01

    The unique properties of synthetic nanostructures promise a diverse set of applications as carriers for drug delivery, which are advantageous in terms of biocompatibility, pharmacokinetics, targeting and controlled drug release. Historically, more traditional drug delivery systems have focused on spherical carriers. However, there is a growing interest in pursuing non-spherical carriers, such as elongated or filamentous morphologies, now available due to novel formulation strategies. Unique physiochemical properties of these supramolecular structures offer distinct advantages as drug delivery systems. In particular, results of recent studies in cell cultures and lab animals indicate that rational design of carriers of a given geometry (size and shape) offers an unprecedented control of their longevity in circulation and targeting to selected cellular and subcellular locations. This article reviews drug delivery aspects of non-spherical drug delivery systems, including material selection and formulation, drug loading and release, biocompatibility, circulation behavior, targeting and subcellular addressing. PMID:19040392

  10. Lipoidal Soft Hybrid Biocarriers of Supramolecular Construction for Drug Delivery

    PubMed Central

    Kumar, Dinesh; Sharma, Deepak; Singh, Gurmeet; Singh, Mankaran; Rathore, Mahendra Singh

    2012-01-01

    Lipid-based innovations have achieved new heights during the last few years as an essential component of drug development. The current challenge of drug delivery is liberation of drug agents at the right time in a safe and reproducible manner to a specific target site. A number of novel drug delivery systems has emerged encompassing various routes of administration, to achieve controlled and targeted drug delivery. Microparticulate lipoidal vesicular system represents a unique technology platform suitable for the oral and systemic administration of a wide variety of molecules with important therapeutic biological activities, including drugs, genes, and vaccine antigens. The success of liposomes as drug carriers has been reflected in a number of liposome-based formulations, which are commercially available or are currently undergoing clinical trials. Also, novel lipid carrier-mediated vesicular systems are originated. This paper has focused on the lipid-based supramolecular vesicular carriers that are used in various drug delivery and drug targeting systems. PMID:22888455

  11. Polymeric Microgels as Potential Drug Delivery Vesicles

    NASA Astrophysics Data System (ADS)

    McDonough, Ryan; Streletzky, Kiril; Bayachou, Mekki; Peiris, Pubudu

    2010-03-01

    The temperature dependent volume phase change of cross-linked amphiphilic molecules (microgels) suggests their use as drug delivery vesicles. Drug particles aggregate in the slightly hydrophobic microgel interior. They are stored in equilibrium until the critical temperature (Tv) is reached where the volume phase change limits available space, thus expelling the drugs. This loading property of hydroxypropylcellulose (HPC) microgels was tested using amperometric analytical techniques. Small molecules inside microgels do not approach the electrode surface, which decreases current signal. A room temperature (Troom) flow amperometric measurement comparing microgel/paracetamol solution with control paracetamol samples yielded about 20 percent concentration reduction in the microgel sample. Results from the steady-state electrochemical experiment confirm the 20 percent concentration drop in the microgel sample compared to the control sample at Troom. Using the steady-state experiment with a cyclic temperature ramp from Troom to beyond Tv showed that the paracetamol concentration change between the temperature extremes was greater for the microgels than for the controls. An evolving aspect of the study is the characterization of microgel shrinkage from in situ, temperature controlled liquid AFM images as compared to previously completed DLS characterization of the same microgel sample.

  12. Advances in Lymphatic Imaging and Drug Delivery

    SciTech Connect

    Nune, Satish K.; Gunda, Padmaja; Majeti, Bharat K.; Thallapally, Praveen K.; Laird, Forrest M.

    2011-09-10

    Cancer remains the second leading cause of death after heart disease in the US. While metastasized cancers such as breast, prostate, and colon are incurable, before their distant spread, these diseases will have invaded the lymphatic system as a first step in their progression. Hence, proper evaluation of the disease state of the lymphatics which drain a tumor site is crucial to staging and the formation of a treatment plan. Current lymphatic imaging modalities with visible dyes and radionucleotide tracers offer limited sensitivity and poor resolution; however, newer tools using nanocarriers, quantum dots, and magnetic resonance imaging promise to vastly improve the staging of lymphatic spread without needless biopsies. Concurrent with the improvement of lymphatic imaging agents, has been the development of drug carriers that can localize chemotherapy to the lymphatic system, thus improving the treatment of localized disease while minimizing the exposure of healthy organs to cytotoxic drugs. This review will focus on polymeric systems that have been developed for imaging and drug delivery to the lymph system, how these new devices improve upon current technologies, and where further improvement is needed.

  13. Microencapsulation: A promising technique for controlled drug delivery

    PubMed Central

    Singh, M.N.; Hemant, K.S.Y.; Ram, M.; Shivakumar, H.G.

    2010-01-01

    Microparticles offer various significant advantages as drug delivery systems, including: (i) an effective protection of the encapsulated active agent against (e.g. enzymatic) degradation, (ii) the possibility to accurately control the release rate of the incorporated drug over periods of hours to months, (iii) an easy administration (compared to alternative parenteral controlled release dosage forms, such as macro-sized implants), and (iv) Desired, pre-programmed drug release profiles can be provided which match the therapeutic needs of the patient. This article gives an overview on the general aspects and recent advances in drug-loaded microparticles to improve the efficiency of various medical treatments. An appropriately designed controlled release drug delivery system can be a foot ahead towards solving problems concerning to the targeting of drug to a specific organ or tissue, and controlling the rate of drug delivery to the target site. The development of oral controlled release systems has been a challenge to formulation scientist due to their inability to restrain and localize the system at targeted areas of gastrointestinal tract. Microparticulate drug delivery systems are an interesting and promising option when developing an oral controlled release system. The objective of this paper is to take a closer look at microparticles as drug delivery devices for increasing efficiency of drug delivery, improving the release profile and drug targeting. In order to appreciate the application possibilities of microcapsules in drug delivery, some fundamental aspects are briefly reviewed. PMID:21589795

  14. Impact of emulsion-based drug delivery systems on intestinal permeability and drug release kinetics.

    PubMed

    Buyukozturk, Fulden; Benneyan, James C; Carrier, Rebecca L

    2010-02-25

    Lipid based drug delivery systems, and in particular self-emulsifying drug delivery systems (SEDDS), show great potential for enhancing oral bioavailability but have not been broadly applied, largely due to lack of general formulation guidance. To help understand how formulation design influences physicochemical emulsion properties and associated function in the gastrointestinal environment, a range of twenty-seven representative self-emulsifying formulations were investigated. Two key functions of emulsion-based drug delivery systems, permeability enhancement and drug release, were studied and statistically related to three formulation properties - oil structure, surfactant hydrophilic liphophilic balance (HLB) values, and surfactant-to-oil ratio. Three surfactants with HLB values ranging from 10 to 15 and three structurally different oils (long chain triglyceride, medium chain triglyceride, and propylene glycol dicaprylate/dicaprate) were combined at three different weight ratios (1:1, 5:1, 9:1). Unstable formulations of low HLB surfactant (HLB=10) had a toxic effect on cells at high (1:1) surfactant concentrations, indicating the importance of formulation stability for minimizing toxicity. Results also indicate that high HLB surfactant (Tween 80) loosens tight junction at high (1:1) surfactant concentrations. Release coefficients for each emulsion system were calculated. Incorporation of a long chain triglyceride (Soybean oil) as the oil phase increased the drug release rate constant. These results help establish an initial foundation for relating emulsion function to formulation design and enabling bioavailability optimization across a broad, representative range of SEDDS formulations.

  15. Development of Bioadhesive Chitosan Superporous Hydrogel Composite Particles Based Intestinal Drug Delivery System

    PubMed Central

    Modhia, Ishan; Mehta, Anant; Patel, Rupal; Patel, Chhagan

    2013-01-01

    Bioadhesive superporous hydrogel composite (SPHC) particles were developed for an intestinal delivery of metoprolol succinate and characterized for density, porosity, swelling, morphology, and bioadhesion studies. Chitosan and HPMC were used as bioadhesive and release retardant polymers, respectively. A 32 full factorial design was applied to optimize the concentration of chitosan and HPMC. The drug loaded bioadhesive SPHC particles were filled in capsule, and the capsule was coated with cellulose acetate phthalate and evaluated for drug content, in vitro drug release, and stability studies. To ascertain the drug release kinetics, the drug release profiles were fitted for mathematical models. The prepared system remains bioadhesive up to eight hours in intestine and showed Hixson-Crowell release with anomalous nonfickian type of drug transport. The application of SPHC polymer particles as a biomaterial carrier opens a new insight into bioadhesive drug delivery system and could be a future platform for other molecules for intestinal delivery. PMID:23984380

  16. Lipid formulation as a drug carrier for drug delivery.

    PubMed

    Tomii, Yoshifumi

    2002-01-01

    In recent years, a Drug Delivery System (DDS), a preparative approach attracts the attention in the development of new drugs. DDS focuses on the regulation of the in vivo dynamics, such as absorption, distribution, metabolism, and elimination, thereby improving the effectiveness and the safety of the drugs by an applicable use of drug preparation technologies. A conventional intravenous dosage form of Amphotericin B (AmB), Fungizone, is the most effective clinically available for treating fungal infections. However, the clinical efficacy of AmB is limited by its adverse effects. Several lipid formulations, such as Liposomal AmB (L-AmB), AmB lipid complex (ABLC), and AmB colloidal dispersion (ABCD), with reduced side effects have been developed. These formulations are reported to have excellent safety and efficacy. However, comparable efficacy can be achieved only when they are administered at high doses than AmB. One of the problems of using these formulations is that they are easily taken up by the reticuloendothelial system (RES). An artificial lipoprotein-like particles, a novel drug carrier Lipid Nano-Sphere (LNS), which is 25 - 50 nm in size and is composed of phospholipids and simple lipid. LNS show a higher plasma concentration of drugs and lower uptake by RES-tissue different forms other lipid base drug carriers. In vitro and in vivo, LNS incorporating AmB, NS-718, shows reduced toxicity, while maintaining activity against fungi. LNS have a unique characteristic as an effective carrier of AmB for treatment of fungal infection.

  17. Supramolecular hydrogels as drug delivery systems.

    PubMed

    Saboktakin, Mohammad Reza; Tabatabaei, Roya Mahdavi

    2015-04-01

    Drug delivery from a hydrogel carrier implanted under the kidney capsule is an innovative way to induce kidney tissue regeneration and/or prevent kidney inflammation or fibrosis. We report here on the development of supramolecular hydrogels for this application. Chain-extended hydrogelators containing hydrogen bonding units in the main chain, and bifunctional hydrogelators end-functionalized with hydrogen bonding moieties, were made. The influence of these hydrogels on the renal cortex when implanted under the kidney capsule was studied. The overall tissue response to these hydrogels was found to be mild, and minimal damage to the cortex was observed, using the infiltration of macrophages, formation of myofibroblasts, and the deposition of collagen III as relevant read-out parameters. Differences in tissue response to these hydrogels could be related to the different physico-chemical properties of the three hydrogels.

  18. Herbal Excipients in Novel Drug Delivery Systems

    PubMed Central

    Shirwaikar, A.; Shirwaikar, Annie; Prabu, S. Lakshmana; Kumar, G. Aravind

    2008-01-01

    The use of natural excipients to deliver the bioactive agents has been hampered by the synthetic materials. However advantages offered by these natural excipients are their being non-toxic, less expensive and freely available. The performance of the excipients partly determines the quality of the medicines. The traditional concept of the excipients as any component other than the active substance has undergone a substantial evolution from an inert and cheap vehicle to an essential constituent of the formulation. Excipients are any component other than the active substance(s) intentionally added to formulation of a dosage form. This article gives an overview of herbal excipients which are used in conventional dosage forms as well as novel drug delivery systems. PMID:20046764

  19. Ocular Drug Delivery for Glaucoma Management

    PubMed Central

    Gooch, Nathan; Molokhia, Sarah A.; Condie, Russell; Burr, Randon Michael; Archer, Bonnie; Ambati, Balamurali K.; Wirostko, Barbara

    2012-01-01

    Current glaucoma management modalities are hindered by low patient compliance and adherence. This can be due to highly complex treatment strategies or poor patient understanding. Treatments focus on the management or reduction of intraocular pressure. This is most commonly done through the use of daily topical eye drops. Unfortunately, despite effective therapies, glaucoma continues to progress, possibly due to patients not adhering to their treatments. In order to mitigate these patient compliance issues, many sustained release treatments are being researched and are entering the clinic. Conjunctival, subconjunctival, and intravitreal inserts, punctal plugs, and drug depots are currently in clinical development. Each delivery system has hurdles, yet shows promise and could potentially mitigate the current problems associated with poor patient compliance. PMID:24300188

  20. An investigation into keratinolytic enzymes to enhance ungual drug delivery.

    PubMed

    Mohorcic, M; Torkar, A; Friedrich, J; Kristl, J; Murdan, S

    2007-03-06

    The topical therapy of nail diseases is limited by the low permeability of drugs through the nail plate. To increase drug penetration, the integrity of the nail plate must be compromised to a certain extent. We hypothesised that keratinolytic enzymes might decrease the barrier properties of the nail plate by hydrolysing the nail keratins, and thereby enhance ungual drug permeation. To determine enzyme action on nail plates, nail clippings were incubated at 35 degrees C, in the presence of keratinase at optimal pH for 48h, after which the nail plates were examined using scanning electron microscopy. It was found that the enzyme acted on the intercellular matrix which holds nail cells together, such that corneocytes on the dorsal surface separated from one another and 'lifted off' the nail plate. In addition, the surface of the corneocytes was corroded. Permeation studies using modified Franz diffusion cells and bovine hoof membranes as a model for the nail plate showed that the enzyme enhanced drug permeation through the hoof membrane. The permeability and partition coefficients, and the drug flux were found to be significantly increased in the presence of the enzyme. We can conclude that the enzyme, via its hydrolytic action on nail plate proteins, could increase ungual drug delivery.

  1. Biomimetic transport and rational drug delivery.

    PubMed

    Ranney, D F

    2000-01-15

    Medicine and pharmaceutics are encountering critical needs and opportunities for transvascular drug delivery that improves site targeting and tissue permeation by mimicking natural tissue addressing and transport mechanisms. This is driven by the accelerated development of genomic agents requiring targeted controlled release. Although rationally designed for in vitro activity, such agents are not highly effective in vivo, due to opsonization and degradation by plasma constituents, and failure to transport across the local vascular endothelium and tissue matrix. A growing knowledge of the addresses of the body can be applied to engineer "Bio-Logically" staged delivery systems with sequential bioaddressins complementary to the discontinuous compartments encountered--termed discontinuum pharmaceutics. Effective tissue targeting is accomplished by leukocytes, bacteria, and viruses. We are increasingly able to mimic their bioaddressins by genomic means. Approaches described in this commentary include: (a) endothelial-directed adhesion mediated by oligosaccharides and carbohydrates (e.g. dermatan sulfate as a mimic of sulfated CD44) and peptidomimetics interacting with adhesins, selectins, integrins, hyaluronans, and locally induced growth factors (e.g. vascular endothelial growth factor, VEGF) and coagulation factors (e.g. factor VIII antigen); (b) improved tissue permeation conferred by hydrophilically "cloaked" carrier systems; (c) "uncloaking" by matrix dilution or selective triggering near the target cells; and (d) target binding-internalization by terminally exposed hydrophobic moieties, cationic polymers, and receptor-binding lectins, peptides, or carbohydrates. This commentary also describes intermediate technology solutions (e.g. "hybrid drugs"), and highlights the high-resolution, dynamic magnetic resonance imaging and radiopharmaceutical imaging technologies plus the groups and organizations capable of accelerating these important initiatives.

  2. Evaluation of Aerosol Delivery of Nanosuspension for Pre-clinical Pulmonary Drug Delivery

    NASA Astrophysics Data System (ADS)

    Chiang, Po-Chang; Alsup, Jason W.; Lai, Yurong; Hu, Yiding; Heyde, Bruce R.; Tung, David

    2009-03-01

    Asthma and chronic obstructive pulmonary disease (COPD) are pulmonary diseases that are characterized by inflammatory cell infiltration, cytokine production, and airway hyper-reactivity. Most of the effector cells responsible for these pathologies reside in the lungs. One of the most direct ways to deliver drugs to the target cells is via the trachea. In a pre-clinical setting, this can be achieved via intratracheal (IT), intranasal (IN), or aerosol delivery in the desired animal model. In this study, we pioneered the aerosol delivery of a nanosuspension formulation in a rodent model. The efficiency of different dosing techniques and formulations to target the lungs were compared, and fluticasone was used as the model compound. For the aerosol particle size determination, a ten-stage cascade impactor was used. The mass median aerodynamic diameter (MMAD) was calculated based on the percent cumulative accumulation at each stage. Formulations with different particle size of fluticasone were made for evaluation. The compatibility of regular fluticasone suspension and nanosuspension for aerosol delivery was also investigated. The in vivo studies were conducted on mice with optimized setting. It was found that the aerosol delivery of fluticasone with nanosuspension was as efficient as intranasal (IN) dosing, and was able to achieve dose dependent lung deposition.

  3. Detection and drug delivery from superhydrophobic materials

    NASA Astrophysics Data System (ADS)

    Falde, Eric John

    The wetting of a rough material is controlled by surface chemistry and morphology, the liquid phase, solutes, and surfactants that affect the surface tension with the gas phase, and environmental conditions such as temperature and pressure. Materials with high (>150°) apparent contact angles are known as superhydrophobic and are very resistant to wetting. However, in complex biological mixtures eventually protein adsorbs, fouling the surface and facilitating wetting on time scales from seconds to months. The work here uses the partially-wetted (Cassie-Baxter) to fully-wetted (Wenzel) state transition to control drug delivery and to perform surfactant detection via surface tension using hydrophobic and superhydrophobic materials. First there is an overview of the physics of the non-wetting state and the transition to wetting. Then there is a review of how wetting can be controlled by outside stimuli and applications of these materials. Next there is work presented on controlling drug release using superhydrophobic materials with controlled wetting rates, with both in vitro and in vivo results. Then there is work on developing a sensor based on this wetting state transition and its applications toward detecting solute levels in biological fluids for point-of-care diagnosis. Finally, there is work presented on using these sensors for detecting the alcohol content in wine and spirits.

  4. Programmable biomaterials for dynamic and responsive drug delivery

    PubMed Central

    Stejskalová, Anna; Kiani, Mehrdad T

    2016-01-01

    Biomaterials are continually being designed that enable new methods for interacting dynamically with cell and tissues, in turn unlocking new capabilities in areas ranging from drug delivery to regenerative medicine. In this review, we explore some of the recent advances being made in regards to programming biomaterials for improved drug delivery, with a focus on cancer and infection. We begin by explaining several of the underlying concepts that are being used to design this new wave of drug delivery vehicles, followed by examining recent materials systems that are able to coordinate the temporal delivery of multiple therapeutics, dynamically respond to changing tissue environments, and reprogram their bioactivity over time. PMID:27190245

  5. Drug Delivery Approaches for the Treatment of Cervical Cancer

    PubMed Central

    Ordikhani, Farideh; Erdem Arslan, Mustafa; Marcelo, Raymundo; Sahin, Ilyas; Grigsby, Perry; Schwarz, Julie K.; Azab, Abdel Kareem

    2016-01-01

    Cervical cancer is a highly prevalent cancer that affects women around the world. With the availability of new technologies, researchers have increased their efforts to develop new drug delivery systems in cervical cancer chemotherapy. In this review, we summarized some of the recent research in systematic and localized drug delivery systems and compared the advantages and disadvantages of these methods. PMID:27447664

  6. Clinical applications of biomedical microdevices for controlled drug delivery.

    PubMed

    Gurman, Pablo; Miranda, Oscar R; Clayton, Kevin; Rosen, Yitzhak; Elman, Noel M

    2015-01-01

    Miniaturization of devices to micrometer and nanometer scales, combined with the use of biocompatible and functional materials, has created new opportunities for the implementation of drug delivery systems. Advances in biomedical microdevices for controlled drug delivery platforms promise a new generation of capabilities for the treatment of acute conditions and chronic illnesses, which require high adherence to treatment, in which temporal control over the pharmacokinetic profiles is critical. In addition, clinical conditions that require a combination of drugs with specific pharmacodynamic profiles and local delivery will benefit from drug delivery microdevices. This review provides a summary of various clinical applications for state-of-the-art controlled drug delivery microdevices, including cancer, endocrine and ocular disorders, and acute conditions such as hemorrhagic shock. Regulatory considerations for clinical translation of drug delivery microdevices are also discussed. Drug delivery microdevices promise a remarkable gain in clinical outcomes and a substantial social impact. A review of articles covering the field of microdevices for drug delivery was performed between January 1, 1990, and January 1, 2014, using PubMed as a search engine.

  7. Hydrogels for ocular drug delivery and tissue engineering

    PubMed Central

    Fathi, Marzieh; Barar, Jaleh; Aghanejad, Ayuob; Omidi, Yadollah

    2015-01-01

    Hydrogels, as crosslinked polymeric three dimensional networks, possess unique structure and behavior in response to the internal and/or external stimuli. As a result, they offer great prospective applications in drug delivery, cell therapy and human tissue engineering. Here, we highlight the potential of hydrogels in prolonged intraocular drug delivery and ocular surface therapy using stem cells incorporated hydrogels. PMID:26929918

  8. Clinical Considerations of Focal Drug Delivery In Cancer Treatment.

    PubMed

    Harris, Jamie; Chiu, Bill

    2017-02-24

    According to the US Center for Disease Control, cancer deaths are the second most common cause of mortality in both adults and children. Definitive treatment of solid tumors involves surgical resection with or without systemic chemotherapy and radiation. The advent of local drug delivery presents a unique treatment modality that can offer substantial benefits in cancer management. Local drug delivery offers targeted drug delivery to cancer tissues while minimizing side effects of the medications. Three main phases in solid tumor management exist for the treating physician: initial diagnosis with tissue biopsy, surgical resection with or without chemotherapy, and management of metastatic disease. Image guided studies, using modalities such as MRI, computerized tomography, and ultrasound to sample tumors have been described. The initial diagnosis phase offers a treatment window for local drug delivery with the aid of image guidance. After the diagnosis of malignancy is made, surgical resection can become an important part of tumor management. Currently, FDA approved local drug delivery systems are being used in concert with resection for intracranial glioma. Many other applications of implantation of local drug delivery at the time of surgery in other tumors, including breast and neuroblastoma, are being investigated. Finally, for patients who present with or progress to single sites of metastatic disease, such as brain or liver metastasis, studies have shown potential applications for local drug delivery as well. This review will discuss the current state of local drug delivery in the treatment of solid tumors and possible future directions.

  9. Synthetic Tumor Networks for Screening Drug Delivery Systems

    PubMed Central

    Prabhakarpandian, Balabhaskar; Shen, Ming-Che; Nichols, Joseph B.; Garson, Charles J.; Mills, Ivy R.; Matar, Majed M.; Fewell, Jason G.; Pant, Kapil

    2015-01-01

    Tumor drug delivery is a complex phenomenon affected by several elements in addition to drug or delivery vehicle’s physico-chemical properties. A key factor is tumor microvasculature with complex effects including convective transport, high interstitial pressure and enhanced vascular permeability due to the presence of “leaky vessels”. Current in vitro models of the tumor microenvironment for evaluating drug delivery are oversimplified and, as a result, show poor correlation with in vivo performance. In this study, we report on the development of a novel microfluidic platform that models the tumor microenvironment more accurately, with physiologically and morphologically realistic microvasculature including endothelial cell lined leaky capillary vessels along with 3D solid tumors. Endothelial cells and 3D spheroids of cervical tumor cells were co-cultured in the networks. Drug vehicle screening was demonstrated using GFP gene delivery by different formulations of nanopolymers. The synthetic tumor network was successful in predicting in vivo delivery efficiencies of the drug vehicles. The developed assay will have critical applications both in basic research, where it can be used to develop next generation delivery vehicles, and in drug discovery where it can be used to study drug transport and delivery efficacy in realistic tumor microenvironment, thereby enabling drug compound and/or delivery vehicle screening. PMID:25599856

  10. Formulation and Optimization of Mucoadhesive Nanodrug Delivery System of Acyclovir

    PubMed Central

    Bhosale, UV; Kusum, Devi V; Jain, N

    2011-01-01

    Acyclovir is an antiviral drug used for the treatment of herpes simplex virus infections, with an oral bioavailability of only 10–20% [limiting absorption in gastrointestinal tract to duodenum and jejunum] and half-life of about 3 h, and is soluble only at acidic pH (pKa 2.27). Mucoadhesive polymeric nanodrug delivery systems of acyclovir have been designed and optimized using 23 full factorial design. Poly (lactic-co-glycolic acid) (PLGA) (50:50) was used as the polymer along with polycarbophil (Noveon AA-1) as the mucoadhesive polymer and pluronic F68 as the stabilizer. From the preliminary trials, the constraints for independent variables X1 (amount of PLGA), X2 (amount of pluronic F68) and X3 (amount of polycarbophil) have been fixed. The dependent variables that were selected for study were particle size (Y1), % drug entrapment (Y2) and % drug release in 12 h (Y3). The derived polynomial equations were verified by check point formulation. The application of factorial design gave a statistically systematic approach for the formulation and optimization of nanoparticles with the desired particle size, % drug release and high entrapment efficiency. Drug: Polymer ratio and concentration of stabilizer were found to influence the particle size and entrapment efficiency of acyclovir-loaded PLGA nanoparticles. The release was found to follow Fickian as well as non-Fickian diffusion mechanism with zero-order drug release for all batches. In vitro intestinal mucoadhesion of nanoparticles increased with increasing concentration of polycarbophil. These preliminary results indicate that acyclovir-loaded mucoadhesive PLGA nanoparticles could be effective in sustaining drug release for a prolonged period. PMID:22224033

  11. Oral Drug Delivery with Polymeric Nanoparticles: The Gastrointestinal Mucus Barriers

    PubMed Central

    Ensign, Laura M.; Cone, Richard; Hanes, Justin

    2012-01-01

    Oral delivery is the most common method for drug administration. However, poor solubility, stability, and bioavailability of many drugs make achieving therapeutic levels via the gastrointestinal (GI) tract challenging. Drug delivery must overcome numerous hurdles, including the acidic gastric environment and the continuous secretion of mucus that protects the GI tract. Nanoparticle drug carriers that can shield drugs from degradation and deliver them to intended sites within the GI tract may enable more efficient and sustained drug delivery. However, the rapid secretion and shedding of GI tract mucus can significantly limit the effectiveness of nanoparticle drug delivery systems. Many types of nanoparticles are efficiently trapped in and rapidly removed by mucus, making controlled release in the GI tract difficult. This review addresses the protective barrier properties of mucus secretions, how mucus affects the fate of orally administered nanoparticles, and recent developments in nanoparticles engineered to penetrate the mucus barrier. PMID:22212900

  12. Nanoparticle-based drug delivery to the vagina: a review

    PubMed Central

    Ensign, Laura M.; Cone, Richard; Hanes, Justin

    2014-01-01

    Vaginal drug administration can improve prophylaxis and treatment of many conditions affecting the female reproductive tract, including sexually transmitted diseases, fungal and bacterial infections, and cancer. However, achieving sustained local drug concentrations in the vagina can be challenging, due to the high permeability of the vaginal epithelium and expulsion of conventional soluble drug dosage forms. Nanoparticle-based drug delivery platforms have received considerable attention for vaginal drug delivery, as nanoparticles can provide sustained release, cellular targeting, and even intrinsic antimicrobial or adjuvant properties that can improve the potency and/or efficacy of prophylactic and therapeutic modalities. Here, we review the use of polymeric nanoparticles, liposomes, dendrimers, and inorganic nanoparticles for vaginal drug delivery. Although most of the work toward nanoparticle-based drug delivery in the vagina has been focused on HIV prevention, strategies for treatment and prevention of other sexually transmitted infections, treatment for reproductive tract cancer, and treatment of fungal and bacterial infections are also highlighted. PMID:24830303

  13. Advances in drug delivery system for platinum agents based combination therapy

    PubMed Central

    Kang, Xiang; Xiao, Hai-Hua; Song, Hai-Qin; Jing, Xia-Bin; Yan, Le-San; Qi, Ruo-Gu

    2015-01-01

    Platinum-based anticancer agents are widely used as first-line drugs in cancer chemotherapy for various solid tumors. However, great side effects and occurrence of resistance remain as the major drawbacks for almost all the platinum drugs developed. To conquer these problems, new strategies should be adopted for platinum drug based chemotherapy. Modern nanotechnology has been widely employed in the delivery of various therapeutics and diagnostic. It provides the possibility of targeted delivery of a certain anticancer drug to the tumor site, which could minimize toxicity and optimize the drug efficacy. Here, in this review, we focused on the recent progress in polymer based drug delivery systems for platinum-based combination therapy. PMID:26779373

  14. Bimodal Gastroretentive Drug Delivery Systems of Lamotrigine: Formulation and Evaluation

    PubMed Central

    Poonuru, R. R.; Gonugunta, C. S. R

    2014-01-01

    Gastroretentive bimodal drug delivery systems of lamotrigine were developed using immediate release and extended release segments incorporated in a hydroxypropyl methylcellulose capsule and in vitro and in vivo evaluations were conducted. In vivo radiographic studies were carried out for the optimized formulation in healthy human volunteers with replacement of drug polymer complex by barium sulphate and the floating time was noted. Here the immediate release segment worked as loading dose and extended release segment as maintenance dose. The results of release studies of formulations with hydrophillic matrix to formulations with dual matrix hydroxypropyl methylcellulose acetate succinate shown that as the percentage of polymer increased, the release decreased. Selected formulation F2 having F-Melt has successfully released the drug within one hour and hydrophillic matrix composing polyethylene oxide with 5% hydroxypropyl methylcellulose acetate succinate showed a lag time of one hour and then extended its release up to 12th hour with 99.59% drug release following zero order kinetics with R2 value of 0.989. The Korsmeyer-Peppas equation showed the R2 value to be 0.941 and n value was 1.606 following non-Fickian diffusion pattern with supercase II relaxation mechanism. Here from extended release tablet the drug released slowly from the matrix while floating. PMID:25593380

  15. Different concepts of drug delivery in disease entities.

    PubMed

    Serafin, A; Stańczak, A

    2009-04-01

    This is a review of classical and novel concepts of drug delivery in particular diseases such as central nervous system disease, ophthalmic disease, cardiovascular disease, cancer and others. Nowadays, scientists are trying to propose efficient and selective drugs for the site of action, with best acceptance of patients, that can be metabolized to non-toxic derivatives. Prodrugs, soft drugs, codrugs are designed to maximize the amount of active drugs that reaches the site of action, through changing the physicochemical, biopharmaceutical or pharmacokinetic properties of the parent drugs. For last years different concepts of drug delivery have been developed to achieve the best patients' tolerance of a drug that has no undesirable properties. It is established that future studies will ameliorate drug properties so as to achieve the best drug delivery system.

  16. The impact of ageing on the barriers to drug delivery.

    PubMed

    Perrie, Yvonne; Badhan, Raj K Singh; Kirby, Daniel J; Lowry, Deborah; Mohammed, Afzal R; Ouyang, Defang

    2012-07-20

    Generally, we like to see ageing as a process that is happening to people older than ourselves. However the process of ageing impacts on a wide range of functions within the human body. Whilst many of the outcomes of ageing can now be delayed or reduced, age-related changes in cellular, molecular and physiological functionality of tissues and organs can also influence how drugs enter, distribute and are eliminated from the body. Therefore, the changing profile of barriers to drug delivery should be considered if we are to develop more age-appropriate medicines. Changes in the drug dissolution and absorption in older patients may require the formulation of oral delivery systems that offer enhanced retention at absorption sites to improve drug delivery. Alternatively, liquid and fast-melt dosage systems may address the need of patients who have difficulties in swallowing medication. Ageing-induced changes in the lung can also result in slower drug absorption, which is further compounded by disease factors, common in an ageing population, that reduce lung capacity. In terms of barriers to drug delivery to the eye, the main consideration is the tear film, which like other barriers to drug delivery, changes with normal ageing and can impact on the bioavailability of drugs delivery using eye drops and suspensions. In contrast, whilst the skin as a barrier changes with age, no significant difference in absorption of drugs from transdermal drug delivery is observed in different age groups. However, due to the age-related pharmacokinetic and pharmacodynamic changes, dose adaptation should still be considered for drug delivery across the skin. Overall it is clear that the increasing age demographic of most populations, presents new (or should that be older) barriers to effective drug delivery.

  17. Chronotherapeutic drug delivery systems: an approach to circadian rhythms diseases.

    PubMed

    Sunil, S A; Srikanth, M V; Rao, N Sreenivasa; Uhumwangho, M U; Latha, K; Murthy, K V Ramana

    2011-11-01

    The purpose of writing this review on chronotherapeutic drug delivery systems (ChrDDs) is to review the literatures with special focus on ChrDDs and the various dosage forms, techniques that are used to target the circadian rhythms (CR) of various diseases. Many functions of the human body vary considerably in a day. ChrDDs refers to a treatment method in which in vivo drug availability is timed to match circadian rhythms of disease in order to optimize therapeutic outcomes and minimize side effects. Several techniques have been developed but not many dosage forms for all the diseases are available in the market. ChrDDs are gaining importance in the field of pharmaceutical technology as these systems reduce dosing frequency, toxicity and deliver the drug that matches the CR of that particular disease when the symptoms are maximum to worse. Finally, the ultimate benefit goes to the patient due the compliance and convenience of the dosage form. Some diseases that follow circadian rhythms include cardiovascular diseases, asthma, arthritis, ulcers, diabetes etc. ChrDDs in the market were also discussed and the current technologies used to formulate were also stated. These technologies include Contin® , Chronotopic®, Pulsincaps®, Ceform®, Timerx®, Oros®, Codas®, Diffucaps®, Egalet®, Tablet in capsule device, Core-in-cup tablet technology. A coated drug-core tablet matrix, A bi-layered tablet, Multiparticulate-based chronotherapeutic drug delivery systems, Chronoset and Controlled release microchips.

  18. Pharmacosomes: An Emerging Novel Vesicular Drug Delivery System for Poorly Soluble Synthetic and Herbal Drugs

    PubMed Central

    2013-01-01

    In the arena of solubility enhancement, several problems are encountered. A novel approach based on lipid drug delivery system has evolved, pharmacosomes. Pharmacosomes are colloidal, nanometric size micelles, vesicles or may be in the form of hexagonal assembly of colloidal drug dispersions attached covalently to the phospholipid. They act as befitting carrier for delivery of drugs quite precisely owing to their unique properties like small size, amphiphilicity, active drug loading, high entrapment efficiency, and stability. They help in controlled release of drug at the site of action as well as in reduction in cost of therapy, drug leakage and toxicity, increased bioavailability of poorly soluble drugs, and restorative effects. There has been advancement in the scope of this delivery system for a number of drugs used for inflammation, heart diseases, cancer, and protein delivery along with a large number of herbal drugs. Hence, pharmacosomes open new challenges and opportunities for improved novel vesicular drug delivery system. PMID:24106615

  19. Drug Delivery Systems and Combination Therapy by Using Vinca Alkaloids

    PubMed Central

    Lee, Chun-Ting; Huang, Yen-Wei; Yang, Chih-Hui; Huang, Keng-Shiang

    2015-01-01

    Developing new methods for chemotherapy drug delivery has become a topic of great concern. Vinca alkaloids are among the most widely used chemotherapy reagents for tumor therapy; however, their side effects are particularly problematic for many medical doctors. To reduce the toxicity and enhance the therapeutic efficiency of vinca alkaloids, many researchers have developed strategies such as using liposome-entrapped drugs, chemical- or peptide-modified drugs, polymeric packaging drugs, and chemotherapy drug combinations. This review mainly focuses on the development of a vinca alkaloid drug delivery system and the combination therapy. Five vinca alkaloids (eg, vincristine, vinblastine, vinorelbine, vindesine, and vinflunine) are reviewed. PMID:25877096

  20. Nanofibers based antibacterial drug design, delivery and applications.

    PubMed

    Ulubayram, Kezban; Calamak, Semih; Shahbazi, Reza; Eroglu, Ipek

    2015-01-01

    Infections caused by microorganisms like bacteria, fungi, etc. are the main obstacle in healing processes. Conventional antibacterial administration routes can be listed as oral, intravenous/intramuscular, topical and inhalation. These kinds of drug administrations are faced with critical vital issues such as; more rapid delivery of the drug than intended which can result in bacterial resistance, dose related systemic toxicity, tissue irritation and finally delayed healing process that need to be tackled. Recently, studies have been focused on new drug delivery systems, overcoming resistance and toxicological problems and finally localizing the molecules at the site of action in a proper dose. In this regard, many nanotechnological approaches such as nanoparticulate therapeutic systems have been developed to address accompanying problems mentioned above. Among them, drug loaded electrospun nanofibers propose main advantages like controlled drug delivery, high drug loading capacity, high encapsulation efficiency, simultaneous delivery of multiple drugs, ease of production and cost effectiveness for pharmaceutical and biomedical applications. Therefore, some particular attention has been devoted to the design of electrospun nanofibers as promising antibacterial drug carrier systems. A variety of antibacterials e.g., biocides, antibiotics, quaternary ammonium salts, triclosan, metallic nanoparticles (silver, titanium dioxide, and zinc oxide) and antibacterial polymers (chitosan, polyethyleneimine, etc.) have been impregnated by various techniques into nanofibers that exhibit strong antibacterial activity in standard assays. This review highlights the design and delivery of antibacterial drug loaded nanofibers with particular focus on their function in the fields of drug delivery, wound healing, tissue engineering, cosmetics and other biomedical applications.

  1. Novel Approaches in Formulation and Drug Delivery using Contact Lenses

    PubMed Central

    Singh, Kishan; Nair, Anroop B; Kumar, Ashok; Kumria, Rachna

    2011-01-01

    The success of ocular delivery relies on the potential to enhance the drug bioavailability by controlled and extended release of drug on the eye surface. Several new approaches have been attempted to augment the competence and diminish the intrinsic side effects of existing ocular drug delivery systems. In this contest, progress has been made to develop drug-eluting contact lens using different techniques, which have the potential to control and sustain the delivery of drug. Further, the availability of novel polymers have facilitated and promoted the utility of contact lenses in ocular drug delivery. Several research groups have already explored the feasibility and potential of contact lens using conventional drugs for the treatment of periocular and intraocular diseases. Contact lenses formulated using modern technology exhibits high loading, controlled drug release, apposite thickness, water content, superior mechanical and optical properties as compared to commercial lenses. In general, this review discus various factors and approaches designed and explored for the successful delivery of ophthalmic drugs using contact lenses as drug delivery device PMID:24826007

  2. Microemulsion: New Insights into the Ocular Drug Delivery

    PubMed Central

    Hegde, Rahul Rama; Verma, Anurag; Ghosh, Amitava

    2013-01-01

    Delivery of drugs into eyes using conventional drug delivery systems, such as solutions, is a considerable challenge to the treatment of ocular diseases. Drug loss from the ocular surface by lachrymal fluid secretion, lachrymal fluid-eye barriers, and blood-ocular barriers are main obstacles. A number of ophthalmic drug delivery carriers have been made to improve the bioavailability and to prolong the residence time of drugs applied topically onto the eye. The potential use of microemulsions as an ocular drug delivery carrier offers several favorable pharmaceutical and biopharmaceutical properties such as their excellent thermodynamic stability, phase transition to liquid-crystal state, very low surface tension, and small droplet size, which may result in improved ocular drug retention, extended duration of action, high ocular absorption, and permeation of loaded drugs. Further, both lipophilic and hydrophilic characteristics are present in microemulsions, so that the loaded drugs can diffuse passively as well get significantly partitioned in the variable lipophilic-hydrophilic corneal barrier. This review will provide an insight into previous studies on microemulsions for ocular delivery of drugs using various nonionic surfactants, cosurfactants, and associated irritation potential on the ocular surface. The reported in vivo experiments have shown a delayed effect of drug incorporated in microemulsion and an increase in the corneal permeation of the drug. PMID:23936681

  3. Facing the Truth about Nanotechnology in Drug Delivery

    PubMed Central

    Park, Kinam

    2013-01-01

    Nanotechnology in drug delivery has been manifested into nanoparticles that can have unique properties both in vitro and in vivo, especially in targeted drug delivery to tumors. Numerous nanoparticle formulations have been designed and tested to great effect in small animal models, but the translation of the small animal results to clinical success has been limited. Successful translation requires revisiting the meaning of nanotechnology in drug delivery, understanding the limitations of nanoparticles, identifying the misconceptions pervasive in the field, and facing inconvenient truths. Nanoparticle approaches can have real impact in improving drug delivery by focusing on the problems at hand, such as enhancing their drug loading capacity, affinity to target cells, and spatiotemporal control of drug release. PMID:24490875

  4. Silk-Based Biomaterials for Sustained Drug Delivery

    PubMed Central

    Yucel, Tuna; Lovett, Michael L.; Kaplan, David L.

    2014-01-01

    Silk presents a rare combination of desirable properties for sustained drug delivery, including aqueous-based purification and processing options without chemical cross-linkers, compatibility with common sterilization methods, controllable and surface-mediated biodegradation into non-inflammatory by-products, biocompatibility, utility in drug stabilization, and robust mechanical properties. A versatile silk-based toolkit is currently available for sustained drug delivery formulations of small molecule through macromolecular drugs, with a promise to mitigate several drawbacks associated with other degradable sustained delivery technologies in the market. Silk-based formulations utilize silk’s well-defined nano- through microscale structural hierarchy, stimuli-responsive self-assembly pathways and crystal polymorphism, as well as sequence and genetic modification options towards targeted pharmaceutical outcomes. Furthermore, by manipulating the interactions between silk and drug molecules, near-zero order sustained release may be achieved through diffusion- and degradation-based release mechanisms. Because of these desirable properties, there has been increasing industrial interest in silk-based drug delivery systems currently at various stages of the developmental pipeline from pre-clinical to FDA-approved products. Here, we discuss the unique aspects of silk technology as a sustained drug delivery platform and highlight the current state of the art in silk-based drug delivery. We also offer a potential early development pathway for silk-based sustained delivery products. PMID:24910193

  5. Controlled release for local delivery of drugs: barriers and models.

    PubMed

    Weiser, Jennifer R; Saltzman, W Mark

    2014-09-28

    Controlled release systems are an effective means for local drug delivery. In local drug delivery, the major goal is to supply therapeutic levels of a drug agent at a physical site in the body for a prolonged period. A second goal is to reduce systemic toxicities, by avoiding the delivery of agents to non-target tissues remote from the site. Understanding the dynamics of drug transport in the vicinity of a local drug delivery device is helpful in achieving both of these goals. Here, we provide an overview of controlled release systems for local delivery and we review mathematical models of drug transport in tissue, which describe the local penetration of drugs into tissue and illustrate the factors - such as diffusion, convection, and elimination - that control drug dispersion and its ultimate fate. This review highlights the important role of controlled release science in development of reliable methods for local delivery, as well as the barriers to accomplishing effective delivery in the brain, blood vessels, mucosal epithelia, and the skin.

  6. Computational simulation of drug delivery at molecular level.

    PubMed

    Li, Youyong; Hou, Tingjun

    2010-01-01

    The field of drug delivery is advancing rapidly. By controlling the precise level and/or location of a given drug in the body, side effects are reduced, doses are lowered, and new therapies are possible. Nonetheless, substantial challenges remain for delivering specific drugs into specific cells. Computational methods to predict the binding and dynamics between drug molecule and its carrier are increasingly desirable to minimize the investment in drug design and development. Significant progress in computational simulation is making it possible to understand the mechanism of drug delivery. This review summarizes the computational methods and progress of four categories of drug delivery systems: dendrimers, polymer micelle, liposome and carbon nanotubes. Computational simulations are particularly valuable in designing better drug carriers and addressing issues that are difficult to be explored by laboratory experiments, such as diffusion, dynamics, etc.

  7. Prodrug-based nanoparticulate drug delivery strategies for cancer therapy.

    PubMed

    Luo, Cong; Sun, Jin; Sun, Bingjun; He, Zhonggui

    2014-11-01

    Despite the rapid developments in nanotechnology and biomaterials, the efficient delivery of chemotherapeutic agents is still challenging. Prodrug-based nanoassemblies have many advantages as a potent platform for anticancer drug delivery, such as improved drug availability, high drug loading efficiency, resistance to recrystallization upon encapsulation, and spatially and temporally controllable drug release. In this review, we discuss prodrug-based nanocarriers for cancer therapy, including nanosystems based on polymer-drug conjugates, self-assembling small molecular weight prodrugs and prodrug-encapsulated nanoparticles (NPs). In addition, we discuss new trends in the field of prodrug-based nanoassemblies that enhance the delivery efficiency of anticancer drugs, with special emphasis on smart stimuli-triggered drug release, hybrid nanoassemblies, and combination drug therapy.

  8. Advances and Challenges of Liposome Assisted Drug Delivery

    PubMed Central

    Sercombe, Lisa; Veerati, Tejaswi; Moheimani, Fatemeh; Wu, Sherry Y.; Sood, Anil K.; Hua, Susan

    2015-01-01

    The application of liposomes to assist drug delivery has already had a major impact on many biomedical areas. They have been shown to be beneficial for stabilizing therapeutic compounds, overcoming obstacles to cellular and tissue uptake, and improving biodistribution of compounds to target sites in vivo. This enables effective delivery of encapsulated compounds to target sites while minimizing systemic toxicity. Liposomes present as an attractive delivery system due to their flexible physicochemical and biophysical properties, which allow easy manipulation to address different delivery considerations. Despite considerable research in the last 50 years and the plethora of positive results in preclinical studies, the clinical translation of liposome assisted drug delivery platforms has progressed incrementally. In this review, we will discuss the advances in liposome assisted drug delivery, biological challenges that still remain, and current clinical and experimental use of liposomes for biomedical applications. The translational obstacles of liposomal technology will also be presented. PMID:26648870

  9. Exosomes: Nanoparticulate tools for RNA interference and drug delivery.

    PubMed

    Shahabipour, Fahimeh; Barati, Nastaran; Johnston, Thomas P; Derosa, Giuseppe; Maffioli, Pamela; Sahebkar, Amirhossein

    2017-07-01

    Exosomes are naturally occurring extracellular vesicles released by most mammalian cells in all body fluids. Exosomes are known as key mediators in cell-cell communication and facilitate the transfer of genetic and biochemical information between distant cells. Structurally, exosomes are composed of lipids, proteins, and also several types of RNAs which enable these vesicles to serve as important disease biomarkers. Moreover, exosomes have emerged as novel drug and gene delivery tools owing to their multiple advantages over conventional delivery systems. Recently, increasing attention has been focused on exosomes for the delivery of drugs, including therapeutic recombinant proteins, to various target tissues. Exosomes are also promising vehicles for the delivery of microRNAs and small interfering RNAs, which is usually hampered by rapid degradation of these RNAs, as well as inefficient tissue specificity of currently available delivery strategies. This review highlights the most recent accomplishments and trends in the use of exosomes for the delivery of drugs and therapeutic RNA molecules.

  10. Intraperiodontal pocket: An ideal route for local antimicrobial drug delivery

    PubMed Central

    Nair, Sreeja C.; Anoop, K. R.

    2012-01-01

    Periodontal pockets act as a natural reservoir filled with gingival crevicular fluid for the controlled release delivery of antimicrobials directly. This article reflects the present status of nonsurgical controlled local intrapocket delivery of antimicrobials in the treatment of periodontitis. These sites have specialty in terms of anatomy, permeability, and their ability to retain a delivery system for a desired length of time. A number of antimicrobial products and the composition of the delivery systems, its use, clinical results, and their release are summarized. The goal in using an intrapocket device for the delivery of an antimicrobial agent is the achievement and maintenance of therapeutic drug concentration for the desired period of time. Novel controlled drug delivery system are capable of improving patient compliance as well as therapeutic efficacy with precise control of the rate by which a particular drug dosage is released from a delivery system without the need for frequent administration. These are considered superior drug delivery system because of low cost, greater stability, non-toxicity, biocompatibility, non-immunogenicity, and are biodegradable in nature. This review also focus on the importance and ideal features of periodontal pockets as a drug delivery platform for designing a suitable dosage form along with its potential advantage and limitations. The microbes in the periodontal pocket could destroy periodontal tissues, and a complete knowledge of these as well as an ideal treatment strategy could be helpful in treating this disease. PMID:22470888

  11. Marine Origin Polysaccharides in Drug Delivery Systems

    PubMed Central

    Cardoso, Matias J.; Costa, Rui R.; Mano, João F.

    2016-01-01

    Oceans are a vast source of natural substances. In them, we find various compounds with wide biotechnological and biomedical applicabilities. The exploitation of the sea as a renewable source of biocompounds can have a positive impact on the development of new systems and devices for biomedical applications. Marine polysaccharides are among the most abundant materials in the seas, which contributes to a decrease of the extraction costs, besides their solubility behavior in aqueous solvents and extraction media, and their interaction with other biocompounds. Polysaccharides such as alginate, carrageenan and fucoidan can be extracted from algae, whereas chitosan and hyaluronan can be obtained from animal sources. Most marine polysaccharides have important biological properties such as biocompatibility, biodegradability, and anti-inflammatory activity, as well as adhesive and antimicrobial actions. Moreover, they can be modified in order to allow processing them into various shapes and sizes and may exhibit response dependence to external stimuli, such as pH and temperature. Due to these properties, these biomaterials have been studied as raw material for the construction of carrier devices for drugs, including particles, capsules and hydrogels. The devices are designed to achieve a controlled release of therapeutic agents in an attempt to fight against serious diseases, and to be used in advanced therapies, such as gene delivery or regenerative medicine. PMID:26861358

  12. Drug delivery and nanodetection in lung cancer.

    PubMed

    Badrzadeh, Fariba; Rahmati-Yamchi, Mohammad; Badrzadeh, Kazem; Valizadeh, Alireza; Zarghami, Nosratollah; Farkhani, Samad Mussa; Akbarzadeh, Abolfazl

    2016-01-01

    Lung carcinoma is the most widespread type of cancer worldwide, and is responsible for more deaths than other types of cancer. Lung cancer remains the chief cause of cancer-related deaths in both men and women worldwide, and is increasingly common in women. Each year, the number of deaths from lung cancer is greater than the number due to breast and colorectal cancer combined. Lung cancer accounted for 13% (1.6 million) of the total cases and 18% (1.4 million) of the deaths in 2008. In Iran, lung cancer is one of the five leading tumors. Among females, it was the fourth most commonly diagnosed cancer, and the second leading cause of cancer death. Nanotechnology can be defined as the science and engineering involved in the design, characterization, and application of materials and devices whose smallest functional organization in at least one dimension is on the nanometer scale, i.e. one billionth of a meter. It is an exciting multidisciplinary field that involves the design and engineering of nano objects or nanotools with diameters less than 500 nanometers (nm), and it is one of the most interesting fields of the 21st century. Nanotechnology also offers the ability to detect diseases, such as tumors, much earlier than ever imaginable. This article presents nano devices for lung cancer detection and drug delivery systems.

  13. Marine Origin Polysaccharides in Drug Delivery Systems.

    PubMed

    Cardoso, Matias J; Costa, Rui R; Mano, João F

    2016-02-05

    Oceans are a vast source of natural substances. In them, we find various compounds with wide biotechnological and biomedical applicabilities. The exploitation of the sea as a renewable source of biocompounds can have a positive impact on the development of new systems and devices for biomedical applications. Marine polysaccharides are among the most abundant materials in the seas, which contributes to a decrease of the extraction costs, besides their solubility behavior in aqueous solvents and extraction media, and their interaction with other biocompounds. Polysaccharides such as alginate, carrageenan and fucoidan can be extracted from algae, whereas chitosan and hyaluronan can be obtained from animal sources. Most marine polysaccharides have important biological properties such as biocompatibility, biodegradability, and anti-inflammatory activity, as well as adhesive and antimicrobial actions. Moreover, they can be modified in order to allow processing them into various shapes and sizes and may exhibit response dependence to external stimuli, such as pH and temperature. Due to these properties, these biomaterials have been studied as raw material for the construction of carrier devices for drugs, including particles, capsules and hydrogels. The devices are designed to achieve a controlled release of therapeutic agents in an attempt to fight against serious diseases, and to be used in advanced therapies, such as gene delivery or regenerative medicine.

  14. Hollow Pollen Shells to Enhance Drug Delivery

    PubMed Central

    Diego-Taboada, Alberto; Beckett, Stephen T.; Atkin, Stephen L.; Mackenzie, Grahame

    2014-01-01

    Pollen grain and spore shells are natural microcapsules designed to protect the genetic material of the plant from external damage. The shell is made up of two layers, the inner layer (intine), made largely of cellulose, and the outer layer (exine), composed mainly of sporopollenin. The relative proportion of each varies according to the plant species. The structure of sporopollenin has not been fully characterised but different studies suggest the presence of conjugated phenols, which provide antioxidant properties to the microcapsule and UV (ultraviolet) protection to the material inside it. These microcapsule shells have many advantageous properties, such as homogeneity in size, resilience to both alkalis and acids, and the ability to withstand temperatures up to 250 °C. These hollow microcapsules have the ability to encapsulate and release actives in a controlled manner. Their mucoadhesion to intestinal tissues may contribute to the extended contact of the sporopollenin with the intestinal mucosa leading to an increased efficiency of delivery of nutraceuticals and drugs. The hollow microcapsules can be filled with a solution of the active or active in a liquid form by simply mixing both together, and in some cases operating a vacuum. The active payload can be released in the human body depending on pressure on the microcapsule, solubility and/or pH factors. Active release can be controlled by adding a coating on the shell, or co-encapsulation with the active inside the shell. PMID:24638098

  15. Polymer nanogels: a versatile nanoscopic drug delivery platform

    PubMed Central

    Chacko, Reuben T.; Ventura, Judy; Zhuang, Jiaming; Thayumanavan, S.

    2012-01-01

    In this review we put the spotlight on crosslinked polymer nanogels, a promising platform that has the characteristics of an “ideal” drug delivery vehicle. Some of the key aspects of drug delivery vehicle design like stability, response to biologically relevant stimuli, passive targeting, active targeting, toxicity and ease of synthesis are discussed. We discuss several delivery systems in this light and highlight some examples of systems, which satisfy some or all of these design requirements. In particular, we point to the advantages that crosslinked polymeric systems bring to drug delivery. We review some of the synthetic methods of nanogel synthesis and conclude with the diverse applications in drug delivery where nanogels have been fruitfully employed. PMID:22342438

  16. Reservoir-Based Drug Delivery Systems Utilizing Microtechnology

    PubMed Central

    Stevenson, Cynthia L.; Santini, John T.; Langer, Robert

    2012-01-01

    This review covers reservoir-based drug delivery systems that incorporate microtechnology, with an emphasis on oral, dermal, and implantable systems. Key features of each technology are highlighted such as working principles, fabrication methods, dimensional constraints, and performance criteria. Reservoir-based systems include a subset of microfabricated drug delivery systems and provide unique advantages. Reservoirs, whether external to the body or implanted, provide a well-controlled environment for a drug formulation, allowing increased drug stability and prolonged delivery times. Reservoir systems have the flexibility to accommodate various delivery schemes, including zero order, pulsatile, and on demand dosing, as opposed to a standard sustained release profile. Furthermore, the development of reservoir-based systems for targeted delivery for difficult to treat applications (e.g., ocular) has resulted in potential platforms for patient therapy. PMID:22465783

  17. Molecular Communication Modeling of Antibody-Mediated Drug Delivery Systems.

    PubMed

    Chahibi, Youssef; Akyildiz, Ian F; Balasubramaniam, Sasitharan; Koucheryavy, Yevgeni

    2015-07-01

    Antibody-mediated Drug Delivery Systems (ADDS) are emerging as one of the most encouraging therapeutic solutions for treating several diseases such as human cancers. ADDS use small molecules (antibodies) that propagate in the body and bind selectively to their corresponding receptors (antigens) expressed at the surface of the diseased cells. In this paper, the Molecular Communication (MC) paradigm, where information is conveyed through the concentration of molecules, is advocated for the engineering of ADDS and modeling their complex behavior, to provide a realistic model without the over-complication of system biology models, and the limitations of experimental approaches. The peculiarities of antibodies, including their anisotropic transport and complex electrochemical structure, are taken into account to develop an analytical model of the ADDS transport and antigen-binding kinetics. The end-to-end response of ADDS, from the drug injection to the drug absorption, is mathematically derived based on the geometry of the antibody molecule, the electrochemical structure of the antibody-antigen complex, and the physiology of the patient. The accuracy of the MC model is validated by finite-element (COMSOL) simulations. The implications of the complex interplay between the transport and kinetics parameters on the performance of ADDS are effectively captured by the proposed MC model. The MC model of ADDS will enable the discovery and optimization of drugs in a versatile, cost-efficient, and reliable manner.

  18. Numerical optimization of targeted delivery of charged nanoparticles to the ostiomeatal complex for treatment of rhinosinusitis

    PubMed Central

    Xi, Jinxiang; Yuan, Jiayao Eddie; Si, Xiuhua April; Hasbany, James

    2015-01-01

    Background Despite the prevalence of rhinosinusitis that affects 10%–15% of the population, current inhalation therapy shows limited efficacy. Standard devices deliver <5% of the drugs to the sinuses due to the complexity of nose structure, secluded location of the sinus, poor ventilation, and lack of control of particle motions inside the nasal cavity. Methods An electric-guided delivery system was developed to guide charged particles to the ostiomeatal complex (OMC). Its performance was numerically assessed in an MRI-based nose–sinus model. Key design variables related to the delivery device, drug particles, and patient breathing were determined using sensitivity analysis. A two-stage optimization of design variables was conducted to obtain the best performance of the delivery system using the Nelder-Mead algorithm. Results and discussion The OMC delivery system exhibited high sensitivity to the applied electric field and electrostatic charges carried by the particles. Through the synthesis of electric guidance and point drug release, the new delivery system eliminated particle deposition in the nasal valve and turbinate regions and significantly enhanced the OMC doses. An OMC delivery efficiency of 72.4% was obtained with the optimized design, which is one order of magnitude higher than the standard nasal devices. Moreover, optimization is imperative to achieve a sound delivery protocol because of the large number of design variables. The OMC dose increased from 45.0% in the baseline model to 72.4% in the optimized system. The optimization framework developed in this study can be easily adapted for the delivery of drugs to other sites in the nose such as the ethmoid sinus and olfactory region. PMID:26257521

  19. Cancer nanomedicine: from drug delivery to imaging.

    PubMed

    Chow, Edward Kai-Hua; Ho, Dean

    2013-12-18

    Nanotechnology-based chemotherapeutics and imaging agents represent a new era of "cancer nanomedicine" working to deliver versatile payloads with favorable pharmacokinetics and capitalize on molecular and cellular targeting for enhanced specificity, efficacy, and safety. Despite the versatility of many nanomedicine-based platforms, translating new drug or imaging agents to the clinic is costly and often hampered by regulatory hurdles. Therefore, translating cancer nanomedicine may largely be application-defined, where materials are adapted only toward specific indications where their properties confer unique advantages. This strategy may also realize therapies that can optimize clinical impact through combinatorial nanomedicine. In this review, we discuss how particular materials lend themselves to specific applications, the progress to date in clinical translation of nanomedicine, and promising approaches that may catalyze clinical acceptance of nano.

  20. An Engineering Approach to Biomedical Sciences: Advanced Strategies in Drug Delivery Systems Production

    PubMed Central

    Barba, Anna Angela; Dalmoro, Annalisa; d’Amore, Matteo

    2012-01-01

    Development and optimization of novel production techniques for drug delivery systems are fundamental steps in the “from the bench to the bedside” process which is the base of translational medicine. In particular, in the current scenery where the need for reducing energy consumption, emissions, wastes and risks drives the development of sustainable processes, new pharmaceutical manufacturing does not constitute an exception. In this paper, concepts of process intensification are presented and their transposition in drug delivery systems production is discussed. Moreover, some examples on intensified techniques, for drug microencapsulation and granules drying, are reported. PMID:23905058

  1. An engineering approach to biomedical sciences: advanced strategies in drug delivery systems production.

    PubMed

    Barba, Anna Angela; Dalmoro, Annalisa; d'Amore, Matteo

    2012-09-01

    Development and optimization of novel production techniques for drug delivery systems are fundamental steps in the "from the bench to the bedside" process which is the base of translational medicine. In particular, in the current scenery where the need for reducing energy consumption, emissions, wastes and risks drives the development of sustainable processes, new pharmaceutical manufacturing does not constitute an exception. In this paper, concepts of process intensification are presented and their transposition in drug delivery systems production is discussed. Moreover, some examples on intensified techniques, for drug microencapsulation and granules drying, are reported.

  2. Advances in chitosan-based drug delivery vehicles

    NASA Astrophysics Data System (ADS)

    Hu, Liming; Sun, Yun; Wu, Yan

    2013-03-01

    Within the past few years, chitosan-based drug delivery vehicles have become some of the most attractive to be studied. In contrast to all other polysaccharides, chitosan has demonstrated its unique characteristics for drug delivery platforms, including its active primary amino groups for chemical modification, simple and mild preparation methods for the encapsulation of biomolecules or drugs, mucoadhesion to facilitate transport across mucosal barriers and so on. In this review, an overview of the various types of chitosan-based drug delivery systems is provided, with special focus on polymeric drug conjugates and drug nanocarriers. The first part of the review is concerned with the development and applications of polymeric chitosan-drug conjugates. Then the chitosan-based nanocarrier systems as well as their preparation methods and applications are further discussed.

  3. Layered Double Hydroxide-Based Nanocarriers for Drug Delivery

    PubMed Central

    Bi, Xue; Zhang, Hui; Dou, Liguang

    2014-01-01

    Biocompatible clay materials have attracted particular attention as the efficient drug delivery systems (DDS). In this article, we review developments in the use of layered double hydroxides (LDHs) for controlled drug release and delivery. We show how advances in the ability to synthesize intercalated structures have a significant influence on the development of new applications of these materials. We also show how modification and/or functionalization can lead to new biotechnological and biomedical applications. This review highlights the most recent progresses in research on LDH-based controlled drug delivery systems, focusing mainly on: (i) DDS with cardiovascular drugs as guests; (ii) DDS with anti-inflammatory drugs as guests; and (iii) DDS with anti-cancer drugs as guests. Finally, future prospects for LDH-based drug carriers are also discussed. PMID:24940733

  4. Factors affecting drug and gene delivery: effects of interaction with blood components.

    PubMed

    Opanasopit, Praneet; Nishikawa, Makiya; Hashida, Mitsuru

    2002-01-01

    Targeted drug delivery systems have been used extensively to improve the pharmacological and therapeutic activities of a wide variety of drugs and genes. In this article, we summarize the factors determining the tissue disposition of delivery systems: the physicochemical and biological characteristics of the delivery system and the anatomic and physiological characteristics of the tissues. There are several modes of drug and gene targeting, ranging from passive to active targeting, and each of these can be achieved by optimizing the design of the delivery system to suit a specific aim. After entering the systemic circulation, either by an intravascular injection or through absorption from an administration site, however, a delivery system encounters a variety of blood components, including blood cells and a range of serum proteins. These components are by no means inert as far as interaction with the delivery system is concerned, and they can sometimes markedly effect its tissue disposition. The interaction with blood components is known to occur with particulate delivery systems, such as liposomes, or with cationic charge-mediated delivery systems for genes. In addition to these rather nonspecific ones, interactions via the targeting ligand of the delivery system can occur. We recently found that mannosylated carriers interact with serum mannan binding protein, greatly altering their tissue disposition in a number of ways that depend on the properties of the carriers involved.

  5. Recent advances of cocktail chemotherapy by combination drug delivery systems.

    PubMed

    Hu, Quanyin; Sun, Wujin; Wang, Chao; Gu, Zhen

    2016-03-01

    Combination chemotherapy is widely exploited for enhanced cancer treatment in the clinic. However, the traditional cocktail administration of combination regimens often suffers from varying pharmacokinetics among different drugs. The emergence of nanotechnology offers an unparalleled opportunity for developing advanced combination drug delivery strategies with the ability to encapsulate various drugs simultaneously and unify the pharmacokinetics of each drug. This review surveys the most recent advances in combination delivery of multiple small molecule chemotherapeutics using nanocarriers. The mechanisms underlying combination chemotherapy, including the synergistic, additive and potentiation effects, are also discussed with typical examples. We further highlight the sequential and site-specific co-delivery strategies, which provide new guidelines for development of programmable combination drug delivery systems. Clinical outlook and challenges are also discussed in the end.

  6. Recent Advances of Cocktail Chemotherapy by Combination Drug Delivery Systems

    PubMed Central

    Hu, Quanyin; Sun, Wujin; Wang, Chao; Gu, Zhen

    2016-01-01

    Combination chemotherapy is widely exploited for enhanced cancer treatment in clinic. However, the traditional cocktail administration of combination regimens often suffers from varying pharmacokinetics among different drugs. The emergence of nanotechnology offers an unparalleled opportunity for developing advanced combination drug delivery strategies with the ability to encapsulate various drugs simultaneously and unify the pharmacokinetics of each drug. This review surveys the most recent advances in combination delivery of multiple small molecule chemotherapeutics using nanocarriers. The mechanisms underlying combination chemotherapy, including the synergistic, additive and potentiation effects, are also discussed with typical examples. We further highlight the sequential and site-specific co-delivery strategies, which provide new guidelines for development of programmable combination drug delivery systems. Clinical outlook and challenges are also discussed in the end. PMID:26546751

  7. Acoustic behavior of microbubbles and implications for drug delivery.

    PubMed

    Kooiman, Klazina; Vos, Hendrik J; Versluis, Michel; de Jong, Nico

    2014-06-01

    Ultrasound contrast agents are valuable in diagnostic ultrasound imaging, and they increasingly show potential for drug delivery. This review focuses on the acoustic behavior of flexible-coated microbubbles and rigid-coated microcapsules and their contribution to enhanced drug delivery. Phenomena relevant to drug delivery, such as non-spherical oscillations, shear stress, microstreaming, and jetting will be reviewed from both a theoretical and experimental perspective. Further, the two systems for drug delivery, co-administration and the microbubble as drug carrier system, are reviewed in relation to the microbubble behavior. Finally, future prospects are discussed that need to be addressed for ultrasound contrast agents to move from a pre-clinical tool into a clinical setting.

  8. Implementation of quality by design principles in the development of microsponges as drug delivery carriers: Identification and optimization of critical factors using multivariate statistical analyses and design of experiments studies.

    PubMed

    Simonoska Crcarevska, Maja; Dimitrovska, Aneta; Sibinovska, Nadica; Mladenovska, Kristina; Slavevska Raicki, Renata; Glavas Dodov, Marija

    2015-07-15

    Microsponges drug delivery system (MDDC) was prepared by double emulsion-solvent-diffusion technique using rotor-stator homogenization. Quality by design (QbD) concept was implemented for the development of MDDC with potential to be incorporated into semisolid dosage form (gel). Quality target product profile (QTPP) and critical quality attributes (CQA) were defined and identified, accordingly. Critical material attributes (CMA) and Critical process parameters (CPP) were identified using quality risk management (QRM) tool, failure mode, effects and criticality analysis (FMECA). CMA and CPP were identified based on results obtained from principal component analysis (PCA-X&Y) and partial least squares (PLS) statistical analysis along with literature data, product and process knowledge and understanding. FMECA identified amount of ethylcellulose, chitosan, acetone, dichloromethane, span 80, tween 80 and water ratio in primary/multiple emulsions as CMA and rotation speed and stirrer type used for organic solvent removal as CPP. The relationship between identified CPP and particle size as CQA was described in the design space using design of experiments - one-factor response surface method. Obtained results from statistically designed experiments enabled establishment of mathematical models and equations that were used for detailed characterization of influence of identified CPP upon MDDC particle size and particle size distribution and their subsequent optimization.

  9. Optimization of a polymer composite employing molecular mechanic simulations and artificial neural networks for a novel intravaginal bioadhesive drug delivery device.

    PubMed

    Ndesendo, Valence M K; Pillay, Viness; Choonara, Yahya E; du Toit, Lisa C; Kumar, Pradeep; Buchmann, Eckhart; Meyer, Leith C R; Khan, Riaz A

    2012-01-01

    This study aimed at elucidating an optimal synergistic polymer composite for achieving a desirable molecular bioadhesivity and Matrix Erosion of a bioactive-loaded Intravaginal Bioadhesive Polymeric Device (IBPD) employing Molecular Mechanic Simulations and Artificial Neural Networks (ANN). Fifteen lead caplet-shaped devices were formulated by direct compression with the model bioactives zidovudine and polystyrene sulfonate. The Matrix Erosion was analyzed in simulated vaginal fluid to assess the critical integrity. Blueprinting the molecular mechanics of bioadhesion between vaginal epithelial glycoprotein (EGP), mucin (MUC) and the IBPD were performed on HyperChem 8.0.8 software (MM+ and AMBER force fields) for the quantification and characterization of correlative molecular interactions during molecular bioadhesion. Results proved that the IBPD bioadhesivity was pivoted on the conformation, orientation, and poly(acrylic acid) (PAA) composition that interacted with EGP and MUC present on the vaginal epithelium due to heterogeneous surface residue distributions (free energy= -46.33 kcalmol(-1)). ANN sensitivity testing as a connectionist model enabled strategic polymer selection for developing an IBPD with an optimally prolonged Matrix Erosion and superior molecular bioadhesivity (ME = 1.21-7.68%; BHN = 2.687-4.981 N/mm(2)). Molecular modeling aptly supported the EGP-MUC-PAA molecular interaction at the vaginal epithelium confirming the role of PAA in bioadhesion of the IBPD once inserted into the posterior fornix of the vagina.

  10. Recent developments in silicones for topical and transdermal drug delivery.

    PubMed

    Aliyar, Hyder; Schalau, Gerald

    2015-07-01

    Silicones have been used in medicines, cosmetics and medical devices for over 60 years. Polydimethylsiloxanes are polymers that are typically used either as an active in oral drug products or as excipients in topical and transdermal drug products. Inherent characteristics like hydrophobicity, adhesion and aesthetics allow silicones to offer function and performance to drug products. Recent technologies like swollen crosslinked silicone elastomer blend networks, sugar siloxanes, amphiphilic resin linear polymers and silicone hybrid pressure sensitive adhesives promise potential performance advantages and improved drug delivery efficacy. This article presents a review of recent silicone material developments focusing on their function as excipients influencing drug delivery in topical and transdermal systems.

  11. Niosomes: a controlled and novel drug delivery system.

    PubMed

    Rajera, Rampal; Nagpal, Kalpana; Singh, Shailendra Kumar; Mishra, Dina Nath

    2011-01-01

    During the past decade formulation of vesicles as a tool to improve drug delivery, has created a lot of interest amongst the scientist working in the area of drug delivery systems. Vesicular system such as liposomes, niosomes, transferosomes, pharmacosomes and ethosomes provide an alternative to improve the drug delivery. Niosomes play an important role owing to their nonionic properties, in such drug delivery system. Design and development of novel drug delivery system (NDDS) has two prerequisites. First, it should deliver the drug in accordance with a predetermined rate and second it should release therapeutically effective amount of drug at the site of action. Conventional dosage forms are unable to meet these requisites. Niosomes are essentially non-ionic surfactant based multilamellar or unilamellar vesicles in which an aqueous solution of solute is entirely enclosed by a membrane resulting from the organization of surfactant macromolecules as bilayer. Niosomes are formed on hydration of non-ionic surfactant film which eventually hydrates imbibing or encapsulating the hydrating aqueous solution. The main aim of development of niosomes is to control the release of drug in a sustained way, modification of distribution profile of drug and for targeting the drug to the specific body site. This paper deals with composition, characterization/evaluation, merits, demerits and applications of niosomes.

  12. Dendrimeric Systems and Their Applications in Ocular Drug Delivery

    PubMed Central

    Yavuz, Burçin; Bozdağ Pehlivan, Sibel; Ünlü, Nurşen

    2013-01-01

    Ophthalmic drug delivery is one of the most attractive and challenging research area for pharmaceutical scientists and ophthalmologists. Absorption of an ophthalmic drug in conventional dosage forms is seriously limited by physiological conditions. The use of nonionic or ionic biodegradable polymers in aqueous solutions and colloidal dosage forms such as liposomes, nanoparticles, nanocapsules, microspheres, microcapsules, microemulsions, and dendrimers has been studied to overcome the problems mentioned above. Dendrimers are a new class of polymeric materials. The unique nanostructured architecture of dendrimers has been studied to examine their role in delivery of therapeutics and imaging agents. Dendrimers can enhance drug's water solubility, bioavailability, and biocompatibility and can be applied for different routes of drug administration successfully. Permeability enhancer properties of dendrimers were also reported. The use of dendrimers can also reduce toxicity versus activity and following an appropriate application route they allow the delivery of the drug to the targeted site and provide desired pharmacokinetic parameters. Therefore, dendrimeric drug delivery systems are of interest in ocular drug delivery. In this review, the limitations related to eye's unique structure, the advantages of dendrimers, and the potential applications of dendrimeric systems to ophthalmology including imaging, drug, peptide, and gene delivery will be discussed. PMID:24396306

  13. Cyclodextrin nanoassemblies: a promising tool for drug delivery.

    PubMed

    Bonnet, Véronique; Gervaise, Cédric; Djedaïni-Pilard, Florence; Furlan, Aurélien; Sarazin, Catherine

    2015-09-01

    Among the biodegradable and nontoxic compounds that can form nanoparticles for drug delivery, amphiphilic cyclodextrins are very promising. Apart from ionic cyclodextrins, which have been extensively studied and reviewed because of their application in gene delivery, our purpose is to provide a clear description of the supramolecular assemblies of nonionic amphiphilic cyclodextrins, which can form nanoassemblies for controlled drug release. Moreover, we focus on the relationship between their structure and physicochemical characteristics, which is crucial for self assembly and drug delivery. We also highlight the importance of the nanoparticle technology preparation for the stability and application of this nanodevice.

  14. Nanotechnology controlled drug delivery for treating bone diseases.

    PubMed

    Yang, Lei; Webster, Thomas J

    2009-08-01

    Rapid developments at the intersection of nanotechnology and controlled drug delivery have triggered exceptional growth in treating various bone diseases. As a result, over the past decade, nanotechnology has contributed tremendously to controlling drug delivery for treating various bone diseases, and in many cases, has led to increased bone regeneration. In this review paper, the recent experimental progress towards using nanotechnology to treat bone-specific diseases is reviewed. Novel applications of different types of nanomaterials (from nanoparticles to 3D nanostructured scaffolds) for treating bone diseases are summarized. In addition, fundamental principles for utilizing nanomaterials to create better drug delivery systems, especially for treating bone diseases and regenerating bone, are emphasized.

  15. A Controlled Drug-Delivery Experiment Using Alginate Beads

    ERIC Educational Resources Information Center

    Farrell, Stephanie; Vernengo, Jennifer

    2012-01-01

    This paper describes a simple, cost-effective experiment which introduces students to drug delivery and modeling using alginate beads. Students produce calcium alginate beads loaded with drug and measure the rate of release from the beads for systems having different stir rates, geometries, extents of cross-linking, and drug molecular weight.…

  16. Mathematical model of microbicidal flow dynamics and optimization of rheological properties for intra-vaginal drug delivery: Role of tissue mechanics and fluid rheology.

    PubMed

    Anwar, Md Rajib; Camarda, Kyle V; Kieweg, Sarah L

    2015-06-25

    Topically applied microbicide gels can provide a self-administered and effective strategy to prevent sexually transmitted infections (STIs). We have investigated the interplay between vaginal tissue elasticity and the yield-stress of non-Newtonian fluids during microbicide deployment. We have developed a mathematical model of tissue deformation driven spreading of microbicidal gels based on thin film lubrication approximation and demonstrated the effect of tissue elasticity and fluid yield-stress on the spreading dynamics. Our results show that both elasticity of tissue and yield-stress rheology of gel are strong determinants of the coating behavior. An optimization framework has been demonstrated which leverages the flow dynamics of yield-stress fluid during deployment to maximize retention while reaching target coating length for a given tissue elasticity.

  17. Nasal Drug Delivery in Traditional Persian Medicine

    PubMed Central

    Zarshenas, Mohammad Mehdi; Zargaran, Arman; Müller, Johannes; Mohagheghzadeh, Abdolali

    2013-01-01

    Background Over one hundred different pharmaceutical dosage forms have been recorded in literatures of Traditional Persian Medicine among which nasal forms are considerable. Objectives This study designed to derive the most often applied nasal dosage forms together with those brief clinical administrations. Materials and Methods In the current study remaining pharmaceutical manuscripts of Persia during 9th to 18th century AD have been studied and different dosage forms related to nasal application of herbal medicines and their therapeutic effects were derived. Results By searching through pharmaceutical manuscripts of medieval Persia, different nasal dosage forms involving eleven types related to three main groups are found. These types could be derived from powder, solution or liquid and gaseous forms. Gaseous form were classified into fumigation (Bakhoor), vapor bath (Enkebab), inhalation (Lakhlakheh), aroma agents (Ghalieh) and olfaction or smell (Shomoom). Nasal solutions were as drops (Ghatoor), nasal snuffing drops (Saoot) and liquid snuff formulations (Noshoogh). Powders were as nasal insufflation or snorting agents (Nofookh) and errhine or sternutator medicine (Otoos). Nasal forms were not applied only for local purposes. Rather systemic disorders and specially CNS complications were said to be a target for these dosage forms. Discussion While this novel type of drug delivery is known as a suitable substitute for oral and parenteral administration, it was well accepted and extensively mentioned in Persian medical and pharmaceutical manuscripts and other traditional systems of medicine as well. Accordingly, medieval pharmaceutical standpoints on nasal dosage forms could still be an interesting subject of study. Therefore, the current work can briefly show the pharmaceutical knowledge on nasal formulations in medieval Persia and clarify a part of history of traditional Persian pharmacy. PMID:24624204

  18. Biophysics of cell membrane lipids in cancer drug resistance: Implications for drug transport and drug delivery with nanoparticles.

    PubMed

    Peetla, Chiranjeevi; Vijayaraghavalu, Sivakumar; Labhasetwar, Vinod

    2013-11-01

    In this review, we focus on the biophysics of cell membrane lipids, particularly when cancers develop acquired drug resistance, and how biophysical changes in resistant cell membrane influence drug transport and nanoparticle-mediated drug delivery. Recent advances in membrane lipid research show the varied roles of lipids in regulating membrane P-glycoprotein function, membrane trafficking, apoptotic pathways, drug transport, and endocytic functions, particularly endocytosis, the primary mechanism of cellular uptake of nanoparticle-based drug delivery systems. Since acquired drug resistance alters lipid biosynthesis, understanding the role of lipids in cell membrane biophysics and its effect on drug transport is critical for developing effective therapeutic and drug delivery approaches to overcome drug resistance. Here we discuss novel strategies for (a) modulating the biophysical properties of membrane lipids of resistant cells to facilitate drug transport and regain endocytic function and (b) developing effective nanoparticles based on their biophysical interactions with membrane lipids to enhance drug delivery and overcome drug resistance.

  19. Atopic Dermatitis: Drug Delivery Approaches in Disease Management.

    PubMed

    Lalan, Manisha; Baweja, Jitendra; Misra, Ambikanandan

    2015-01-01

    In this review, we describe the very basic of atopic dermatitis (AD), the established management strategies, and the advances in drug delivery approaches for successful therapeutic outcomes. The multifactorial pathophysiology of AD has given rise to the clinician's paradigm of topical and systemic therapy and potential combinations. However, incomplete remission of skin disorders like AD is a major challenge to be overcome. Recurrence is thought to be due to genetic and immunological etiologies and shortcomings in drug delivery. This difficulty has sparked research in nanocarrier-based delivery approaches as well as molecular biology-inspired stratagems to deal with the immunological imbalance and to address insufficiencies of delivery propositions. In this review, we assess various novel drug delivery strategies in terms of their success and utility. We present a brief compilation and assessment of management modalities to sensitize the readers to therapeutic scenario in AD.

  20. Nanoparticles for direct nose-to-brain delivery of drugs.

    PubMed

    Mistry, Alpesh; Stolnik, Snjezana; Illum, Lisbeth

    2009-09-08

    This review aims to evaluate the evidence for the existence of a direct nose-to-brain delivery route for nanoparticles administered to the nasal cavity and transported via the olfactory epithelium and/or via the trigeminal nerves directly to the CNS. This is relevant in the field of drug delivery as well as for new developments in nanotechnology. Experiments in animal models have shown that nano-sized drug delivery systems can enhance nose-to-brain delivery of drugs compared to equivalent drug solutions formulations. Protection of the drug from degradation and/or efflux back into the nasal cavity may partly be the reason for this effect of nanoparticles. It is uncertain, however, whether drug from the nanoparticles is being released in the nasal cavity or the nanoparticles carrying the drug are transported via the olfactory system or the trigeminal nerves into the CNS where the drug is released. Furthermore, toxicity of nanoparticulate drug delivery systems in the nasal cavity and/or in the CNS has not been extensively studied and needs to be considered carefully.

  1. Titanium MEMS Technology Development for Drug Delivery and Microfluidic Applications

    NASA Astrophysics Data System (ADS)

    Khandan, Omid

    drugs subsurface, thereby enhancing delivery efficiencies in an ex vivo rabbit cornea model. Collectively, these results show the potential embodied in developing Ti MNs for effective, minimally invasive, and low-cost ocular drug delivery. Additionally, or the second of these thrusts, we report the development of an anodic bonding process that allows, for the first time, high-strength joining of bulk Ti and glass substrates at the wafer-scale, without need for interlayers or adhesives. We demonstrate that uniform, full-wafer bonding can be achieved at temperatures as low as 250°C, and that failure during burst pressure testing occurs via crack propagation through the glass, rather than the Ti/glass interface, thus demonstrating the robustness of the bonding. Moreover, using optimized bonding conditions, we demonstrate the fabrication of rudimentary Ti/glass-based microfluidic devices at the wafer-scale, and their leak-free operation under pressure-driven flow. Finally, we demonstrate the monolithic integration of nanoporous titanium dioxide within such devices, thus illustrating the promise embodied in Ti anodic bonding for future realization of robust microfluidic devices for photocatalysis applications. Together, these results demonstrate the potential embodied in utilizing Ti MEMS technology for the fabrication of novel drug delivery and microfluidic systems with enhanced robustness, safety, and performance.

  2. Recent advancement of gelatin nanoparticles in drug and vaccine delivery.

    PubMed

    Sahoo, Nityananda; Sahoo, Ranjan Ku; Biswas, Nikhil; Guha, Arijit; Kuotsu, Ketousetuo

    2015-11-01

    Novel drug delivery system using nanoscale materials with a broad spectrum of applications provides a new therapeutic foundation for technological integration and innovation. Nanoparticles are suitable drug carrier for various routes of administration as well as rapid recognition by the immune system. Gelatin, the biological macromolecule is a versatile drug/vaccine delivery carrier in pharmaceutical field due to its biodegradable, biocompatible, non-antigenicity and low cost with easy availability. The surface of gelatin nanoparticles can be modified with site-specific ligands, cationized with amine derivatives or, coated with polyethyl glycols to achieve targeted and sustained release drug delivery. Compared to other colloidal carriers, gelatin nanoparticles are better stable in biological fluids to provide the desired controlled and sustained release of entrapped drug molecules. The current review highlights the different formulation aspects of gelatin nanoparticles which affect the particle characteristics like zeta potential, polydispersity index, entrapment efficacy and drug release properties. It has also given emphasis on the major applications of gelatin nanoparticles in drug and vaccine delivery, gene delivery to target tissues and nutraceutical delivery for improving the poor bioavailabity of bioactive phytonutrients.

  3. Microneedles: a valuable physical enhancer to increase transdermal drug delivery.

    PubMed

    Escobar-Chávez, José Juan; Bonilla-Martínez, Dalia; Villegas-González, Martha Angélica; Molina-Trinidad, Eva; Casas-Alancaster, Norma; Revilla-Vázquez, Alma Luisa

    2011-07-01

    Transdermal drug delivery offers an attractive alternative to the conventional drug delivery methods of oral administration and injection. However, the stratum corneum acts as a barrier that limits the penetration of substances through the skin. Recently, the use of micron-scale needles in increasing skin permeability has been proposed and shown to dramatically increase transdermal delivery. Microneedles have been fabricated with a range of sizes, shapes, and materials. Most in vitro drug delivery studies have shown these needles to increase skin permeability to a broad range of drugs that differ in molecular size and weight. In vivo studies have demonstrated satisfactory release of oligonucleotides and insulin and the induction of immune responses from protein and DNA vaccines. Microneedles inserted into the skin of human subjects were reported to be painless. For all these reasons, microneedles are a promising technology to deliver drugs into the skin. This review presents the main findings concerning the use of microneedles in transdermal drug delivery. It also covers types of microneedles, their advantages and disadvantages, enhancement mechanisms, and trends in transdermal drug delivery.

  4. Preparation of drug delivery systems using supercritical fluid technology.

    PubMed

    Kompella, U B; Koushik, K

    2001-01-01

    Small changes in temperature and pressure near the critical region induce dramatic changes in the density and solubility of supercritical fluids, thereby facilitating the use of environmentally benign agents such as CO2 for their solvent and antisolvent properties in processing a wide variety of materials. While supercritical fluid technologies have been in commercial use in the food and chromatography industries for several years, only recently has this technology made inroads in the formulation of drug delivery systems. This review summarizes some of the recent applications of supercritical fluid technology in the preparation of drug delivery systems. Drugs containing polymeric particles, plain drug particles, solute-containing liposomes, and inclusion complexes of drug and carrier have been formulated using this technology. Also, polymer separation using this technology is enabling the selection of a pure fraction of a polymer, thereby allowing a more precise control of drug release from polymeric delivery systems.

  5. Microneedle-based drug delivery systems: Microfabrication, drug delivery, and safety

    PubMed Central

    Donnelly, Ryan F.; Raj Singh, Thakur Raghu; Woolfson, A. David

    2010-01-01

    Many promising therapeutic agents are limited by their inability to reach the systemic circulation, due to the excellent barrier properties of biological membranes, such as the stratum corneum (SC) of the skin or the sclera/cornea of the eye and others. The outermost layer of the skin, the SC, is the principal barrier to topically-applied medications. The intact SC thus provides the main barrier to exogenous substances, including drugs. Only drugs with very specific physicochemical properties (molecular weight < 500 Da, adequate lipophilicity, and low melting point) can be successfully administered transdermally. Transdermal delivery of hydrophilic drugs and macromolecular agents of interest, including peptides, DNA, and small interfering RNA is problematic. Therefore, facilitation of drug penetration through the SC may involve by-pass or reversible disruption of SC molecular architecture. Microneedles (MNs), when used to puncture skin, will by-pass the SC and create transient aqueous transport pathways of micron dimensions and enhance the transdermal permeability. These micropores are orders of magnitude larger than molecular dimensions, and, therefore, should readily permit the transport of hydrophilic macromolecules. Various strategies have been employed by many research groups and pharmaceutical companies worldwide, for the fabrication of MNs. This review details various types of MNs, fabrication methods and, importantly, investigations of clinical safety of MN. PMID:20297904

  6. Large Porous Hollow Particles: Lightweight Champions of Pulmonary Drug Delivery

    PubMed Central

    Gharse, Sachin; Fiegel, Jennifer

    2016-01-01

    The deep lungs provide an efficient pathway for drugs to transport into the systemic circulation, as the extremely large surface area and thin epithelial membrane enable rapid drug transport to the blood stream. To penetrate into the deep lungs, aerosol particles with aerodynamic diameters of 1–3 μm are optimal. Large porous hollow particles (LPHPs) can achieve this aerodynamic size range through enhanced porosity within the particles (typically < 0.4 g/cm3), which aerodynamically balances the large particle size (> 5 μm, up to 30 μm). The physical properties of these particles provide some key advantages compared to their small, nonporous counterparts through enhanced dispersibility, efficient deep lung deposition, and avoidance of phagocytic clearance. This review highlights the potential of LPHPs in pulmonary delivery of systemic drugs, with a focus on their critical attributes and key formulation aspects. In addition, three examples of LPHPs under development are presented to emphasize the potential of this technology to treat systemic diseases. PMID:26818876

  7. Drug Delivery via Cell Membrane Fusion Using Lipopeptide Modified Liposomes

    PubMed Central

    2016-01-01

    Efficient delivery of drugs to living cells is still a major challenge. Currently, most methods rely on the endocytotic pathway resulting in low delivery efficiency due to limited endosomal escape and/or degradation in lysosomes. Here, we report a new method for direct drug delivery into the cytosol of live cells in vitro and invivo utilizing targeted membrane fusion between liposomes and live cells. A pair of complementary coiled-coil lipopeptides was embedded in the lipid bilayer of liposomes and cell membranes respectively, resulting in targeted membrane fusion with concomitant release of liposome encapsulated cargo including fluorescent dyes and the cytotoxic drug doxorubicin. Using a wide spectrum of endocytosis inhibitors and endosome trackers, we demonstrate that the major site of cargo release is at the plasma membrane. This method thus allows for the quick and efficient delivery of drugs and is expected to have many invitro, ex vivo, and invivo applications. PMID:27725960

  8. Coacervate delivery systems for proteins and small molecule drugs

    PubMed Central

    Johnson, Noah R; Wang, Yadong

    2015-01-01

    Coacervates represent an exciting new class of drug delivery vehicles, developed in the past decade as carriers of small molecule drugs and proteins. This review summarizes several well-described coacervate systems, including Elastin-like peptides for delivery of anti-cancer therapeutics,Heparin-based coacervates with synthetic polycations for controlled growth factor delivery,Carboxymethyl chitosan aggregates for oral drug delivery,Mussel adhesive protein and hyaluronic acid coacervates. Coacervates present advantages in their simple assembly and easy incorporation into tissue engineering scaffolds or as adjuncts to cell therapies. They are also amenable to functionalization such as for targeting or for enhancing the bioactivity of their cargo. These new drug carriers are anticipated to have broad applications and noteworthy impact in the near future. PMID:25138695

  9. Multifunctional inverse opal particles for drug delivery and monitoring

    NASA Astrophysics Data System (ADS)

    Zhang, Bin; Cheng, Yao; Wang, Huan; Ye, Baofen; Shang, Luoran; Zhao, Yuanjin; Gu, Zhongze

    2015-06-01

    Particle-based delivery systems have a demonstrated value for drug discovery and development. Here, we report a new type of particle-based delivery system that has controllable release and is self-monitoring. The particles were composed of poly(N-isopropylacrylamide) (pNIPAM) hydrogel with an inverse opal structure. The presence of macropores in the particles provides channels for active drug loading and release from the materials.Particle-based delivery systems have a demonstrated value for drug discovery and development. Here, we report a new type of particle-based delivery system that has controllable release and is self-monitoring. The particles were composed of poly(N-isopropylacrylamide) (pNIPAM) hydrogel with an inverse opal structure. The presence of macropores in the particles provides channels for active drug loading and release from the materials. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr02324f

  10. Carbon nanotubes for delivery of small molecule drugs.

    PubMed

    Wong, Bin Sheng; Yoong, Sia Lee; Jagusiak, Anna; Panczyk, Tomasz; Ho, Han Kiat; Ang, Wee Han; Pastorin, Giorgia

    2013-12-01

    In the realm of drug delivery, carbon nanotubes (CNTs) have gained tremendous attention as promising nanocarriers, owing to their distinct characteristics, such as high surface area, enhanced cellular uptake and the possibility to be easily conjugated with many therapeutics, including both small molecules and biologics, displaying superior efficacy, enhanced specificity and diminished side effects. While most CNT-based drug delivery system (DDS) had been engineered to combat cancers, there are also emerging reports that employ CNTs as either the main carrier or adjunct material for the delivery of various non-anticancer drugs. In this review, the delivery of small molecule drugs is expounded, with special attention paid to the current progress of in vitro and in vivo research involving CNT-based DDSs, before finally concluding with some consideration on inevitable complications that hamper successful disease intervention with CNTs.

  11. Lyophilized wafers comprising carrageenan and pluronic acid for buccal drug delivery using model soluble and insoluble drugs.

    PubMed

    Kianfar, Farnoosh; Antonijevic, Milan; Chowdhry, Babur; Boateng, Joshua S

    2013-03-01

    Lyophilized muco-adhesive wafers with optimum drug loading for potential buccal delivery have been developed. A freeze-annealing cycle was used to obtain optimized wafers from aqueous gels containing 2% κ-carrageenan (CAR 911), 4% pluronic acid (F127), 4.4% (w/w) polyethylene glycol with 1.8% (w/w) paracetamol or 0.8% (w/w) ibuprofen. Thermogravimetric analysis showed acceptable water content between 0.9 and 1.5%. Differential scanning calorimetry and X-ray diffraction showed amorphous conversion for both drugs. Texture analysis showed ideal mechanical and mucoadhesion characteristics whilst both drugs remained stable over 6 months and drug dissolution at a salivary pH showed gradual release within 2h. The results show the potential of CAR 911 and F127 based wafers for buccal mucosa drug delivery.

  12. Development of Systems for Delivery of Antiviral Drugs.

    DTIC Science & Technology

    1986-10-31

    synthesis of CNS-targeted prodrug esters of ribavirin and selenazole, pharmacokinetic studies of drug distribution and sustained delivery of drug in the brain...The scope of the research program involves the synthesis of CNS-targeted prodrug esters of ribavirin and selenazole, pharmaco- kinetic, studies of...blood-brain barrier. Our initial efforts have been directed toward the synthesis of ribavirin prodrugs. Based upon the brain-specific delivery of, for

  13. Natural polymers, gums and mucilages as excipients in drug delivery.

    PubMed

    Kumar, Shobhit; Gupta, Satish Kumar

    2012-01-01

    Use of natural polymers, gums and mucilages in drug delivery systems has been weighed down by the synthetic materials. Natural based excipients offered advantages such as non-toxicity, less cost and abundantly availablity. Aqueous solubility of natural excipients plays an important role in their selection for designing immediate, controlled or sustained release formulations. This review article provide an overview of natural gum, polymers and mucilages as excipients in dosage forms as well as novel drug delivery systems.

  14. Porous Inorganic Drug Delivery Systems-a Review.

    PubMed

    Sayed, E; Haj-Ahmad, R; Ruparelia, K; Arshad, M S; Chang, M-W; Ahmad, Z

    2017-02-28

    Innovative methods and materials have been developed to overcome limitations associated with current drug delivery systems. Significant developments have led to the use of a variety of materials (as excipients) such as inorganic and metallic structures, marking a transition from conventional polymers. Inorganic materials, especially those possessing significant porosity, are emerging as good candidates for the delivery of a range of drugs (antibiotics, anticancer and anti-inflammatories), providing several advantages in formulation and engineering (encapsulation of drug in amorphous form, controlled delivery and improved targeting). This review focuses on key selected developments in porous drug delivery systems. The review provides a short broad overview of porous polymeric materials for drug delivery before focusing on porous inorganic materials (e.g. Santa Barbara Amorphous (SBA) and Mobil Composition of Matter (MCM)) and their utilisation in drug dosage form development. Methods for their preparation and drug loading thereafter are detailed. Several examples of porous inorganic materials, drugs used and outcomes are discussed providing the reader with an understanding of advances in the field and realistic opportunities.

  15. Nanoparticle hardness controls the internalization pathway for drug delivery

    NASA Astrophysics Data System (ADS)

    Li, Ye; Zhang, Xianren; Cao, Dapeng

    2015-01-01

    Nanoparticle (NP)-based drug delivery systems offer fundamental advantages over current therapeutic agents that commonly display a longer circulation time, lower toxicity, specific targeted release, and greater bioavailability. For successful NP-based drug delivery it is essential that the drug-carrying nanocarriers can be internalized by the target cells and transported to specific sites, and the inefficient internalization of nanocarriers is often one of the major sources for drug resistance. In this work, we use the dissipative particle dynamics simulation to investigate the effect of NP hardness on their internalization efficiency. Three simplified models of NP platforms for drug delivery, including polymeric NP, liposome and solid NP, are designed here to represent increasing nanocarrier hardness. Simulation results indicate that NP hardness controls the internalization pathway for drug delivery. Rigid NPs can enter the cell by a pathway of endocytosis, whereas for soft NPs the endocytosis process can be inhibited or frustrated due to wrapping-induced shape deformation and non-uniform ligand distribution. Instead, soft NPs tend to find one of three penetration pathways to enter the cell membrane via rearranging their hydrophobic and hydrophilic segments. Finally, we show that the interaction between nanocarriers and drug molecules is also essential for effective drug delivery.

  16. Nanoparticle hardness controls the internalization pathway for drug delivery.

    PubMed

    Li, Ye; Zhang, Xianren; Cao, Dapeng

    2015-02-14

    Nanoparticle (NP)-based drug delivery systems offer fundamental advantages over current therapeutic agents that commonly display a longer circulation time, lower toxicity, specific targeted release, and greater bioavailability. For successful NP-based drug delivery it is essential that the drug-carrying nanocarriers can be internalized by the target cells and transported to specific sites, and the inefficient internalization of nanocarriers is often one of the major sources for drug resistance. In this work, we use the dissipative particle dynamics simulation to investigate the effect of NP hardness on their internalization efficiency. Three simplified models of NP platforms for drug delivery, including polymeric NP, liposome and solid NP, are designed here to represent increasing nanocarrier hardness. Simulation results indicate that NP hardness controls the internalization pathway for drug delivery. Rigid NPs can enter the cell by a pathway of endocytosis, whereas for soft NPs the endocytosis process can be inhibited or frustrated due to wrapping-induced shape deformation and non-uniform ligand distribution. Instead, soft NPs tend to find one of three penetration pathways to enter the cell membrane via rearranging their hydrophobic and hydrophilic segments. Finally, we show that the interaction between nanocarriers and drug molecules is also essential for effective drug delivery.

  17. Gastroretentive drug delivery systems for the treatment of Helicobacter pylori.

    PubMed

    Zhao, Shan; Lv, Yan; Zhang, Jian-Bin; Wang, Bing; Lv, Guo-Jun; Ma, Xiao-Jun

    2014-07-28

    Helicobacter pylori (H. pylori) is one of the most common pathogenic bacterial infections and is found in the stomachs of approximately half of the world's population. It is the primary known cause of gastritis, gastroduodenal ulcer disease and gastric cancer. However, combined drug therapy as the general treatment in the clinic, the rise of antibiotic-resistant bacteria, adverse reactions and poor patient compliance are major obstacles to the eradication of H. pylori. Oral site-specific drug delivery systems that could increase the longevity of the treatment agent at the target site might improve the therapeutic effect and avoid side effects. Gastroretentive drug delivery systems potentially prolong the gastric retention time and controlled/sustained release of a drug, thereby increasing the concentration of the drug at the application site, potentially improving its bioavailability and reducing the necessary dosage. Recommended gastroretentive drug delivery systems for enhancing local drug delivery include floating systems, bioadhesive systems and expandable systems. In this review, we summarize the important physiological parameters of the gastrointestinal tract that affect the gastric residence time. We then focus on various aspects useful in the development of gastroretentive drug delivery systems, including current trends and the progress of novel forms, especially with respect to their application for the treatment of H. pylori infections.

  18. Gastroretentive drug delivery systems for the treatment of Helicobacter pylori

    PubMed Central

    Zhao, Shan; Lv, Yan; Zhang, Jian-Bin; Wang, Bing; Lv, Guo-Jun; Ma, Xiao-Jun

    2014-01-01

    Helicobacter pylori (H. pylori) is one of the most common pathogenic bacterial infections and is found in the stomachs of approximately half of the world’s population. It is the primary known cause of gastritis, gastroduodenal ulcer disease and gastric cancer. However, combined drug therapy as the general treatment in the clinic, the rise of antibiotic-resistant bacteria, adverse reactions and poor patient compliance are major obstacles to the eradication of H. pylori. Oral site-specific drug delivery systems that could increase the longevity of the treatment agent at the target site might improve the therapeutic effect and avoid side effects. Gastroretentive drug delivery systems potentially prolong the gastric retention time and controlled/sustained release of a drug, thereby increasing the concentration of the drug at the application site, potentially improving its bioavailability and reducing the necessary dosage. Recommended gastroretentive drug delivery systems for enhancing local drug delivery include floating systems, bioadhesive systems and expandable systems. In this review, we summarize the important physiological parameters of the gastrointestinal tract that affect the gastric residence time. We then focus on various aspects useful in the development of gastroretentive drug delivery systems, including current trends and the progress of novel forms, especially with respect to their application for the treatment of H. pylori infections. PMID:25071326

  19. Transferosomes - A vesicular transdermal delivery system for enhanced drug permeation

    PubMed Central

    Rajan, Reshmy; Jose, Shoma; Mukund, V. P. Biju; Vasudevan, Deepa T.

    2011-01-01

    Transdermal administration of drugs is generally limited by the barrier function of the skin. Vesicular systems are one of the most controversial methods for transdermal delivery of active substances. The interest in designing transdermal delivery systems was relaunched after the discovery of elastic vesicles like transferosomes, ethosomes, cubosomes, phytosomes, etc. This paper presents the composition, mechanisms of penetration, manufacturing and characterization methods of transferosomes as transdermal delivery systems of active substances. For a drug to be absorbed and distributed into organs and tissues and eliminated from the body, it must pass through one or more biological membranes/barriers at various locations. Such a movement of drug across the membrane is called as drug transport. For the drugs to be delivered to the body, they should cross the membranous barrier. The concept of these delivery systems was designed in an attempt to concentrate the drug in the tissues of interest, while reducing the amount of drug in the remaining tissues. Hence, surrounding tissues are not affected by the drug. In addition, loss of drug does not happen due to localization of drug, leading to get maximum efficacy of the medication. Therefore, the phospholipid based carrier systems are of considerable interest in this era. PMID:22171309

  20. Integrated intravital microscopy and mathematical modeling to optimize nanotherapeutics delivery to tumors

    NASA Astrophysics Data System (ADS)

    van de Ven, Anne L.; Wu, Min; Lowengrub, John; McDougall, Steven R.; Chaplain, Mark A. J.; Cristini, Vittorio; Ferrari, Mauro; Frieboes, Hermann B.

    2012-03-01

    Inefficient vascularization hinders the optimal transport of cell nutrients, oxygen, and drugs to cancer cells in solid tumors. Gradients of these substances maintain a heterogeneous cell-scale microenvironment through which drugs and their carriers must travel, significantly limiting optimal drug exposure. In this study, we integrate intravital microscopy with a mathematical model of cancer to evaluate the behavior of nanoparticle-based drug delivery systems designed to circumvent biophysical barriers. We simulate the effect of doxorubicin delivered via porous 1000 x 400 nm plateloid silicon particles to a solid tumor characterized by a realistic vasculature, and vary the parameters to determine how much drug per particle and how many particles need to be released within the vasculature in order to achieve remission of the tumor. We envision that this work will contribute to the development of quantitative measures of nanoparticle design and drug loading in order to optimize cancer treatment via nanotherapeutics.

  1. Enzymatic action of phospholipase A₂ on liposomal drug delivery systems.

    PubMed

    Hansen, Anders H; Mouritsen, Ole G; Arouri, Ahmad

    2015-08-01

    The overexpression of secretory phospholipase A2 (sPLA2) in tumors has opened new avenues for enzyme-triggered active unloading of liposomal antitumor drug carriers selectively at the target tumor. However, the effects of the liposome composition, drug encapsulation, and tumor microenvironment on the activity of sPLA2 are still not well understood. We carried out a physico-chemical study to characterize the sPLA2-assisted breakdown of liposomes using dye-release assays in the context of drug delivery and under physiologically relevant conditions. The influence of temperature, lipid concentration, enzyme concentration, and drug loading on the hydrolysis of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC, Tm=42°C) liposomes with snake venom sPLA2 was investigated. The sensitivity of human sPLA2 to the liposome composition was checked using binary lipid mixtures of phosphatidylcholine (PC) and phosphatidylglycerol (PG) phospholipids with C14 and C16 acyl chains. Increasing temperature (36-41°C) was found to mainly shorten the enzyme lag-time, whereas the effect on lipid hydrolysis rate was modest. The enzyme lag-time was also found to be inversely dependent on the lipid-to-enzyme ratio. Drug encapsulation can alter the hydrolysis profile of the carrier liposomes. The activity of human sPLA2 was highly sensitive to the phospholipid acyl-chain length and negative surface charge density of the liposomes. We believe our work will prove useful for the optimization of sPLA2-susceptible liposomal formulations as well as will provide a solid ground for predicting the hydrolysis profile of the liposomes in vivo at the target site.

  2. Iontophoresis: A Potential Emergence of a Transdermal Drug Delivery System

    PubMed Central

    Dhote, Vinod; Bhatnagar, Punit; Mishra, Pradyumna K.; Mahajan, Suresh C.; Mishra, Dinesh K.

    2012-01-01

    The delivery of drugs into systemic circulation via skin has generated much attention during the last decade. Transdermal therapeutic systems propound controlled release of active ingredients through the skin and into the systemic circulation in a predictive manner. Drugs administered through these systems escape first-pass metabolism and maintain a steady state scenario similar to a continuous intravenous infusion for up to several days. However, the excellent impervious nature of the skin offers the greatest challenge for successful delivery of drug molecules by utilizing the concepts of iontophoresis. The present review deals with the principles and the recent innovations in the field of iontophoretic drug delivery system together with factors affecting the system. This delivery system utilizes electric current as a driving force for permeation of ionic and non-ionic medications. The rationale behind using this technique is to reversibly alter the barrier properties of skin, which could possibly improve the penetration of drugs such as proteins, peptides and other macromolecules to increase the systemic delivery of high molecular weight compounds with controlled input kinetics and minimum inter-subject variability. Although iontophoresis seems to be an ideal candidate to overcome the limitations associated with the delivery of ionic drugs, further extrapolation of this technique is imperative for translational utility and mass human application. PMID:22396901

  3. Synergistic effect of enhancers for transdermal drug delivery.

    PubMed

    Mitragotri, S

    2000-11-01

    Transdermal drug delivery offers a non-invasive route of drug administration, although its applications are limited by low skin permeability. Various enhancers including iontophoresis, chemicals, ultrasound, and electroporation have been shown to enhance transdermal drug transport. Although all these methods have been individually shown to enhance transdermal drug transport, their combinations have often been found to enhance transdermal transport more effectively than each of them alone. This paper summarizes literature studies on these combinations with respect to their efficacy and mechanisms.

  4. Nerve guidance channels as drug delivery vehicles.

    PubMed

    Piotrowicz, Alexandra; Shoichet, Molly S

    2006-03-01

    Nerve guidance channels (NGCs) have been shown to facilitate regeneration after transection injury to the peripheral nerve or spinal cord. Various therapeutic molecules, including neurotrophic factors, have improved regeneration and functional recovery after injury when combined with NGCs; however, their impact has not been maximized partly due to the lack of an appropriate drug delivery system. To address this limitation, nerve growth factor (NGF) was incorporated into NGCs of poly(2-hydroxyethyl methacrylate-co-methyl methacrylate), P(HEMA-co-MMA). The NGCs were synthesized by a liquid-liquid centrifugal casting process and three different methods of protein incorporation were compared in terms of protein distribution and NGF release profile: (1) NGF was encapsulated (with BSA) in biodegradable poly(d,l-lactide-co-glycolide) 85/15 microspheres, which were combined with a PHEMA polymerization formulation and coated on the inside of pre-formed NGCs by a second liquid-liquid centrifugal casting technique; (2) pre-formed NGCs were imbibed with a solution of NGF/BSA and (3) NGF/BSA alone was combined with a PHEMA formulation and coated on the inside of pre-formed NGCs by a second liquid-liquid centrifugal casting technique. Using a fluorescently labelled model protein, the distribution of proteins in NGCs prepared with a coating of either protein-loaded microspheres or protein alone was found to be confined to the inner PHEMA layer. Sustained release of NGF was achieved from NGCs with either NGF-loaded microspheres or NGF alone incorporated into the inner layer, but not from channels imbibed with NGF. By day 28, NGCs with microspheres released a total of 220 pg NGF/cm of channel whereas those NGCs imbibed with NGF released 1040 pg/cm and those NGCs with NGF incorporated directly in a PHEMA layer released 8624 pg/cm. The release of NGF from NGCs with microspheres was limited by a slow-degrading microsphere formulation and by the maximum amount of microspheres that

  5. Planar bioadhesive microdevices: a new technology for oral drug delivery.

    PubMed

    Fox, Cade B; Chirra, Hariharasudhan D; Desai, Tejal A

    2014-01-01

    The oral route is the most convenient and least expensive route of drug administration. Yet, it is accompanied by many physiological barriers to drug uptake including low stomach pH, intestinal enzymes and transporters, mucosal barriers, and high intestinal fluid shear. While many drug delivery systems have been developed for oral drug administration, the physiological components of the gastro intestinal tract remain formidable barriers to drug uptake. Recently, microfabrication techniques have been applied to create micron-scale devices for oral drug delivery with a high degree of control over microdevice size, shape, chemical composition, drug release profile, and targeting ability. With precise control over device properties, microdevices can be fabricated with characteristics that provide increased adhesion for prolonged drug exposure, unidirectional release which serves to avoid luminal drug loss and enhance drug permeation, and protection of a drug payload from the harsh environment of the intestinal tract. Here we review the recent developments in microdevice technology and discuss the potential of these devices to overcome unsolved challenges in oral drug delivery.

  6. Planar bioadhesive microdevices: a new technology for oral drug delivery

    PubMed Central

    Fox, Cade B.; Chirra, Hariharasudhan D.; Desai, Tejal A.

    2014-01-01

    The oral route is the most convenient and least expensive route of drug administration. Yet, it is accompanied by many physiological barriers to drug uptake including low stomach pH, intestinal enzymes and transporters, mucosal barriers, and high intestinal fluid shear. While many drug delivery systems have been developed for oral drug administration, the physiological components of the gastro intestinal tract remain formidable barriers to drug uptake. Recently, microfabrication techniques have been applied to create micron-scale devices for oral drug delivery with a high degree of control over microdevice size, shape, chemical composition, drug release profile, and targeting ability. With precise control over device properties, microdevices can be fabricated with characteristics that provide increased adhesion for prolonged drug exposure, unidirectional release which serves to avoid luminal drug loss and enhance drug permeation, and protection of a drug payload from the harsh environment of the intestinal tract. Here we review the recent developments in microdevice technology and discuss the potential of these devices to overcome unsolved challenges in oral drug delivery. PMID:25219863

  7. Drug delivery systems: polymers and drugs monitored by capillary electromigration methods.

    PubMed

    Simó, Carolina; Cifuentes, Alejandro; Gallardo, Alberto

    2003-11-25

    In this paper, different electromigration methods used to monitor drugs and polymers released from drug delivery systems are reviewed. First, an introduction to the most typical arrangements used as drug delivery systems (e.g., polymer-drug covalent conjugates, membrane or matrix-based devices) is presented. Next, the principles of different capillary electromigration procedures are discussed, followed by a revision on the different procedures employed to monitor the release of drugs and the degradation or solubilization of the polymeric matrices from drug delivery systems during both in vitro and in vivo assays. A critical comparison between these capillary electrophoretic methods and the more common chromatographic methods employed to analyze drugs and polymers from drug delivery systems is presented. Finally, future outlooks of these electromigration procedures in the controlled release field are discussed.

  8. Nanostructured materials for applications in drug delivery and tissue engineering*

    PubMed Central

    GOLDBERG, MICHAEL; LANGER, ROBERT; JIA, XINQIAO

    2010-01-01

    Research in the areas of drug delivery and tissue engineering has witnessed tremendous progress in recent years due to their unlimited potential to improve human health. Meanwhile, the development of nanotechnology provides opportunities to characterize, manipulate and organize matter systematically at the nanometer scale. Biomaterials with nano-scale organizations have been used as controlled release reservoirs for drug delivery and artificial matrices for tissue engineering. Drug-delivery systems can be synthesized with controlled composition, shape, size and morphology. Their surface properties can be manipulated to increase solubility, immunocompatibility and cellular uptake. The limitations of current drug delivery systems include suboptimal bioavailability, limited effective targeting and potential cytotoxicity. Promising and versatile nano-scale drug-delivery systems include nanoparticles, nanocapsules, nanotubes, nanogels and dendrimers. They can be used to deliver both small-molecule drugs and various classes of biomacromolecules, such as peptides, proteins, plasmid DNA and synthetic oligodeoxynucleotides. Whereas traditional tissue-engineering scaffolds were based on hydrolytically degradable macroporous materials, current approaches emphasize the control over cell behaviors and tissue formation by nano-scale topography that closely mimics the natural extracellular matrix (ECM). The understanding that the natural ECM is a multifunctional nanocomposite motivated researchers to develop nanofibrous scaffolds through electrospinning or self-assembly. Nanocomposites containing nanocrystals have been shown to elicit active bone growth. Drug delivery and tissue engineering are closely related fields. In fact, tissue engineering can be viewed as a special case of drug delivery where the goal is to accomplish controlled delivery of mammalian cells. Controlled release of therapeutic factors in turn will enhance the efficacy of tissue engineering. From a materials

  9. Oral Dispersible System: A New Approach in Drug Delivery System

    PubMed Central

    Hannan, P. A.; Khan, J. A.; Khan, A.; Safiullah, S.

    2016-01-01

    Dosage form is a mean used for the delivery of drug to a living body. In order to get the desired effect the drug should be delivered to its site of action at such rate and concentration to achieve the maximum therapeutic effect and minimum adverse effect. Since oral route is still widely accepted route but having a common drawback of difficulty in swallowing of tablets and capsules. Therefore a lot of research has been done on novel drug delivery systems. This review is about oral dispersible tablets a novel approach in drug delivery systems that are now a day's more focused in formulation world, and laid a new path that, helped the patients to build their compliance level with the therapy, also reduced the cost and ease the administration especially in case of pediatrics and geriatrics. Quick absorption, rapid onset of action and reduction in drug loss properties are the basic advantages of this dosage form. PMID:27168675

  10. Using exosomes, naturally-equipped nanocarriers, for drug delivery.

    PubMed

    Batrakova, Elena V; Kim, Myung Soo

    2015-12-10

    Exosomes offer distinct advantages that uniquely position them as highly effective drug carriers. Comprised of cellular membranes with multiple adhesive proteins on their surface, exosomes are known to specialize in cell-cell communications and provide an exclusive approach for the delivery of various therapeutic agents to target cells. In addition, exosomes can be amended through their parental cells to express a targeting moiety on their surface, or supplemented with desired biological activity. Development and validation of exosome-based drug delivery systems are the focus of this review. Different techniques of exosome isolation, characterization, drug loading, and applications in experimental disease models and clinic are discussed. Exosome-based drug formulations may be applied to a wide variety of disorders such as cancer, various infectious, cardiovascular, and neurodegenerative disorders. Overall, exosomes combine benefits of both synthetic nanocarriers and cell-mediated drug delivery systems while avoiding their limitations.

  11. A Review on Composite Liposomal Technologies for Specialized Drug Delivery

    PubMed Central

    Mufamadi, Maluta S.; Pillay, Viness; Choonara, Yahya E.; Du Toit, Lisa C.; Modi, Girish; Naidoo, Dinesh; Ndesendo, Valence M. K.

    2011-01-01

    The combination of liposomes with polymeric scaffolds could revolutionize the current state of drug delivery technology. Although liposomes have been extensively studied as a promising drug delivery model for bioactive compounds, there still remain major drawbacks for widespread pharmaceutical application. Two approaches for overcoming the factors related to the suboptimal efficacy of liposomes in drug delivery have been suggested. The first entails modifying the liposome surface with functional moieties, while the second involves integration of pre-encapsulated drug-loaded liposomes within depot polymeric scaffolds. This attempts to provide ingenious solutions to the limitations of conventional liposomes such as short plasma half-lives, toxicity, stability, and poor control of drug release over prolonged periods. This review delineates the key advances in composite technologies that merge the concepts of depot polymeric scaffolds with liposome technology to overcome the limitations of conventional liposomes for pharmaceutical applications. PMID:21490759

  12. 3-dimensional (3D) fabricated polymer based drug delivery systems.

    PubMed

    Moulton, Simon E; Wallace, Gordon G

    2014-11-10

    Drug delivery from 3-dimensional (3D) structures is a rapidly growing area of research. It is essential to achieve structures wherein drug stability is ensured, the drug loading capacity is appropriate and the desired controlled release profile can be attained. Attention must also be paid to the development of appropriate fabrication machinery that allows 3D drug delivery systems (DDS) to be produced in a simple, reliable and reproducible manner. The range of fabrication methods currently being used to form 3D DDSs include electrospinning (solution and melt), wet-spinning and printing (3-dimensional). The use of these techniques enables production of DDSs from the macro-scale down to the nano-scale. This article reviews progress in these fabrication techniques to form DDSs that possess desirable drug delivery kinetics for a wide range of applications.

  13. Electrohydrodynamics: A facile technique to fabricate drug delivery systems

    PubMed Central

    Chakraborty, Syandan; Liao, I-Chien; Adler, Andrew; Leong, Kam W.

    2009-01-01

    Electrospinning and electrospraying are facile electrohydrodynamic fabrication methods that can generate drug delivery systems (DDS) through a one-step process. The nano-structured fiber and particle morphologies produced by these techniques offer tunable release kinetics applicable to diverse biomedical applications. Coaxial-electrospinning/electrospraying, a relatively new technique of fabricating core-shell fibers/particles have added to the versatility of these DDS by affording a near zero-order drug release kinetics, dampening of burst release, and applicability to a wider range of bioactive agents. Controllable electrospinning/spraying of fibers and particles and subsequent drug release from these chiefly polymeric vehicles depends on well-defined solution and process parameters. The additional drug delivery capability from electrospun fibers can further enhance the material’s functionality in tissue engineering applications. This review discusses the state-of-the-art of using electrohydrodynamic technique to generate nano-fiber/particles as drug delivery devices. PMID:19651167

  14. A review of nebulized drug delivery in COPD

    PubMed Central

    Tashkin, Donald P

    2016-01-01

    Current guidelines recommend inhaled pharmacologic therapy as the preferred route of administration for treating COPD. Bronchodilators (β2-agonists and antimuscarinics) are the mainstay of pharmacologic therapy in patients with COPD, with long-acting agents recommended for patients with moderate to severe symptoms or those who are at a higher risk for COPD exacerbations. Dry powder inhalers and pressurized metered dose inhalers are the most commonly used drug delivery devices, but they may be inadequate in various clinical scenarios (eg, the elderly, the cognitively impaired, and hospitalized patients). As more drugs become available in solution formulations, patients with COPD and their caregivers are becoming increasingly satisfied with nebulized drug delivery, which provides benefits similar to drugs delivered by handheld inhalers in both symptom relief and improved quality of life. This article reviews recent innovations in nebulized drug delivery and the important role of nebulized therapy in the treatment of COPD. PMID:27799757

  15. Using exosomes, naturally-equipped nanocarriers, for drug delivery

    PubMed Central

    Batrakova, Elena V.; Kim, Myung Soo

    2015-01-01

    Exosomes offer distinct advantages that uniquely position them as highly effective drug carriers. Comprised of cellular membranes with multiple adhesive proteins on their surface, exosomes are known to specialize in cell–cell communications and provide an exclusive approach for the delivery of various therapeutic agents to target cells. In addition, exosomes can be amended through their parental cells to express a targeting moiety on their surface, or supplemented with desired biological activity. Development and validation of exosome-based drug delivery systems are the focus of this review. Different techniques of exosome isolation, characterization, drug loading, and applications in experimental disease models and clinic are discussed. Exosome-based drug formulations may be applied to a wide variety of disorders such as cancer, various infectious, cardiovascular, and neuro-degenerative disorders. Overall, exosomes combine benefits of both synthetic nanocarriers and cell-mediated drug delivery systems while avoiding their limitations. PMID:26241750

  16. Carbon nanotubes: a potential concept for drug delivery applications.

    PubMed

    Kumar, Rakesh; Dhanawat, Meenakshi; Kumar, Sudhir; Singh, Brahma N; Pandit, Jayant K; Sinha, Vivek R

    2014-04-01

    The unique properties of carbon nanotubes (CNTs) make them a highly interesting and demandable nanocarrier in the field of nanoscience. CNTs facilitate efficient delivery of therapeutics like drugs, proteins, genes, nucleic acids, vitamins and lot more. Even though highly beneficial, the biocompatibility of CNTs is a major issue in their questioning their potential application in targeting drug delivery. Studies confirmed subdued toxicity of CNTs following slight modifications like functionalization, controlled dimensions, purification etc. A well-established mechanism for cellular internalization is an insistent need to attain a more efficient and targeted delivery. Recent patents have been thoroughly discussed in the text below.

  17. Magnetic nanoparticle-based drug delivery for cancer therapy.

    PubMed

    Tietze, Rainer; Zaloga, Jan; Unterweger, Harald; Lyer, Stefan; Friedrich, Ralf P; Janko, Christina; Pöttler, Marina; Dürr, Stephan; Alexiou, Christoph

    2015-12-18

    Nanoparticles have belonged to various fields of biomedical research for quite some time. A promising site-directed application in the field of nanomedicine is drug targeting using magnetic nanoparticles which are directed at the target tissue by means of an external magnetic field. Materials most commonly used for magnetic drug delivery contain metal or metal oxide nanoparticles, such as superparamagnetic iron oxide nanoparticles (SPIONs). SPIONs consist of an iron oxide core, often coated with organic materials such as fatty acids, polysaccharides or polymers to improve colloidal stability and to prevent separation into particles and carrier medium [1]. In general, magnetite and maghemite particles are those most commonly used in medicine and are, as a rule, well-tolerated. The magnetic properties of SPIONs allow the remote control of their accumulation by means of an external magnetic field. Conjugation of SPIONs with drugs, in combination with an external magnetic field to target the nanoparticles (so-called "magnetic drug targeting", MDT), has additionally emerged as a promising strategy of drug delivery. Magnetic nanoparticle-based drug delivery is a sophisticated overall concept and a multitude of magnetic delivery vehicles have been developed. Targeting mechanism-exploiting, tumor-specific attributes are becoming more and more sophisticated. The same is true for controlled-release strategies for the diseased site. As it is nearly impossible to record every magnetic nanoparticle system developed so far, this review summarizes interesting approaches which have recently emerged in the field of targeted drug delivery for cancer therapy based on magnetic nanoparticles.

  18. Current HPLC Methods for Assay of Nano Drug Delivery Systems.

    PubMed

    Tekkeli, Serife Evrim Kepekci; Kiziltas, Mustafa Volkan

    2016-12-22

    In nano drug formulations the mechanism of release is a critical process to recognize controlled and targeted drug delivery systems. In order to gain high bioavailability and specificity from the drug to reach its therapeutic goal, the active substance must be loaded into the nanoparticles efficiently. Therefore, the amount in biological fluids or tissues and the remaining amount in nano carriers are very important parameters to understand the potential of the nano drug delivery systems. For this aim, suitable and validated quantitation methods are required to determine released drug concentrations from nano pharmaceutical formulations. HPLC (High Performance Liquid Chromatography) is one of the most common techniques used for determination of released drug content out of nano drug formulations, in different physical conditions, over different periods of time. Since there are many types of HPLC methods depending on detector and column types, it is a challenge for the researchers to choose a suitable method that is simple, fast and validated HPLC techniques for their nano drug delivery systems. This review's goal is to compare HPLC methods that are currently used in different nano drug delivery systems in order to provide detailed and useful information for researchers.

  19. Interactive mixture as a rapid drug delivery system.

    PubMed

    Lee, Chin Chiat; Ong, Charlene Li Ching; Heng, Paul Wan Sia; Chan, Lai Wah; Wong, Tin Wui

    2008-02-01

    The effectiveness of an interactive mixture as a rapid drug delivery system is compared with that of a solid dispersion. The influences of drug load, particle size, and crystallinity of these test systems are investigated. The interactive mixtures and solid dispersions were prepared from polyethylene glycol (PEG) 3350 and hydrophobic nifedipine drug by means of physical mixing and melting methods, respectively. The formed products were subjected to drug particle size and crystallinity analyses, and dissolution tests. In comparison with the interactive mixtures, the solid dispersions with low drug load were more effective as a rapid drug delivery system, as the size of a given batch of drug particles was markedly reduced by the molten PEG 3350. The rate and extent of drug dissolution were mainly promoted by decreasing effective drug particle size. However, these were lower in the solid dispersions than in the interactive mixtures when a high load of fine drug particles was used as the starting material. This was attributed to drug coarsening during the preparation of the solid dispersion. Unlike solid dispersions, the interactive mixtures could accommodate a high load of fine drug particles without compromising its capacity to enhance the rate and extent of drug dissolution. The interactive mixture is appropriate for use to deliver a fine hydrophobic drug in a formulation requiring a high drug load.

  20. Microsystems Technologies for Drug Delivery to the Inner Ear

    PubMed Central

    Leary Pararas, Erin E.; Borkholder, David A.; Borenstein, Jeffrey T.

    2012-01-01

    The inner ear represents one of the most technologically challenging targets for local drug delivery, but its clinical significance is rapidly increasing. The prevalence of sensorineural hearing loss and other auditory diseases, along with balance disorders and tinnitus, has spurred broad efforts to develop therapeutic compounds and regenerative approaches to treat these conditions, necessitating advances in systems capable of targeted and sustained drug delivery. The delicate nature of hearing structures combined with the relative inaccessibility of the cochlea by means of conventional delivery routes together necessitate significant advancements in both the precision and miniaturization of delivery systems, and the nature of the molecular and cellular targets for these therapies suggests that multiple compounds may need to be delivered in a time-sequenced fashion over an extended duration. Here we address the various approaches being developed for inner ear drug delivery, including micropump-based devices, reciprocating systems, and cochlear prosthesis-mediated delivery, concluding with an analysis of emerging challenges and opportunities for the first generation of technologies suitable for human clinical use. These developments represent exciting advances that have the potential to repair and regenerate hearing structures in millions of patients for whom no currently available medical treatments exist, a situation that requires them to function with electronic hearing augmentation devices or to live with severely impaired auditory function. These advances also have the potential for broader clinical applications that share similar requirements and challenges with the inner ear, such as drug delivery to the central nervous system. PMID:22386561

  1. Sericin/Dextran Injectable Hydrogel as an Optically Trackable Drug Delivery System for Malignant Melanoma Treatment.

    PubMed

    Liu, Jia; Qi, Chao; Tao, Kaixiong; Zhang, Jinxiang; Zhang, Jian; Xu, Luming; Jiang, Xulin; Zhang, Yunti; Huang, Lei; Li, Qilin; Xie, Hongjian; Gao, Jinbo; Shuai, Xiaoming; Wang, Guobin; Wang, Zheng; Wang, Lin

    2016-03-01

    Severe side effects of cancer chemotherapy prompt developing better drug delivery systems. Injectable hydrogels are an effective site-target system. For most of injectable hydrogels, once delivered in vivo, some properties including drug release and degradation, which are critical to chemotherapeutic effects and safety, are challenging to monitor. Developing a drug delivery system for effective cancer therapy with in vivo real-time noninvasive trackability is highly desired. Although fluorescence dyes are used for imaging hydrogels, the cytotoxicity limits their applications. By using sericin, a natural photoluminescent protein from silk, we successfully synthesized a hydrazone cross-linked sericin/dextran injectable hydrogel. This hydrogel is biodegradable and biocompatible. It achieves efficient drug loading and controlled release of both macromolecular and small molecular drugs. Notably, sericin's photoluminescence from this hydrogel is directly and stably correlated with its degradation, enabling long-term in vivo imaging and real-time monitoring of the remaining drug. The hydrogel loaded with Doxorubicin significantly suppresses tumor growth. Together, the work demonstrates the efficacy of this drug delivery system, and the in vivo effectiveness of this sericin-based optical monitoring strategy, providing a potential approach for improving hydrogel design toward optimal efficiency and safety of chemotherapies, which may be widely applicable to other drug delivery systems.

  2. Drug delivery system based on chronobiology--A review.

    PubMed

    Mandal, Asim Sattwa; Biswas, Nikhil; Karim, Kazi Masud; Guha, Arijit; Chatterjee, Sugata; Behera, Mamata; Kuotsu, Ketousetuo

    2010-11-01

    With the advancement in the field of chronobiology, modern drug delivery approaches have been elevated to a new concept of chronopharmacology i.e. the ability to deliver the therapeutic agent to a patient in a staggered profile. However the major drawback in the development of such delivery system that matches the circadian rhythm requires the availability of precise technology (pulsatile drug delivery). The increasing research interest surrounding this delivery system has widened the areas of pharmaceutics in particular with many more sub-disciplines expected to coexist in the near future. This review on chronopharmaceutics gives a comprehensive emphasis on potential disease targets, revisits the existing technologies in hand and also addresses the theoretical approaches to emerging discipline such as genetic engineering and target based specific molecules. With the biological prospective approaches in delivering drugs it is well understood that safer and more realistic approaches in the therapy of diseases will be achieved in the days to come.

  3. Membrane-targeting liquid crystal nanoparticles (LCNPs) for drug delivery

    NASA Astrophysics Data System (ADS)

    Nag, Okhil K.; Naciri, Jawad; Spillmann, Christopher M.; Delehanty, James B.

    2016-03-01

    In addition to maintaining the structural integrity of the cell, the plasma membrane regulates multiple important cellular processes, such as endocytosis and trafficking, apoptotic pathways and drug transport. The modulation or tracking of such cellular processes by means of controlled delivery of drugs or imaging agents via nanoscale delivery systems is very attractive. Nanoparticle-mediated delivery systems that mediate long-term residence (e.g., days) and controlled release of the cargoes in the plasma membrane while simultaneously not interfering with regular cellular physiology would be ideal for this purpose. Our laboratory has developed a plasma membrane-targeted liquid crystal nanoparticle (LCNP) formulation that can be loaded with dyes or drugs which can be slowly released from the particle over time. Here we highlight the utility of these nanopreparations for membrane delivery and imaging.

  4. Ultrasonic-Activated Micellar Drug Delivery for Cancer Treatment

    PubMed Central

    Husseini, Ghaleb A.; Pitt, William G.

    2008-01-01

    The use of nanoparticles and ultrasound in medicine continues to evolve. Great strides have been made in the areas of producing micelles, nanoemulsions and solid nanoparticles that can be used in drug delivery. An effective nanocarrier allows for the delivery of a high concentration of potent medications to targeted tissue while minimizing the side effect of the agent to the rest of the body. Polymeric micelles have been shown to encapsulate therapeutic agents and maintain their structural integrity at lower concentrations. Ultrasound is currently being used in drug delivery as well as diagnostics, and has many advantages that elevate its importance in drug delivery. The technique is non-invasive, thus no surgery is needed; the ultrasonic waves can be easily controlled by advanced electronic technology so that they can be focused on the desired target volume. Additionally, the physics of ultrasound are widely used and well understood; thus ultrasonic application can be tailored towards a particular drug delivery system. In this article, we review the recent progress made in research that utilizes both polymeric micelles and ultrasonic power in drug delivery. PMID:18506804

  5. Micro-Fluidic Device for Drug Delivery

    NASA Technical Reports Server (NTRS)

    Beebe, David J. (Inventor); MacDonald, Michael J. (Inventor); Eddington, David T. (Inventor); Mensing, Glennys A. (Inventor)

    2014-01-01

    A microfluidic device is provided for delivering a drug to an individual. The microfluidic device includes a body that defines a reservoir for receiving the drug therein. A valve interconnects the reservoir to an output needle that is insertable into the skin of an individual. A pressure source urges the drug from the reservoir toward the needle. The valve is movable between a closed position preventing the flow of the drug from the reservoir to the output needle and an open position allowing for the flow of the drug from the reservoir to the output needle in response to a predetermined condition in the physiological fluids of the individual.

  6. The use of gelatin in a multiple drug delivery system

    NASA Astrophysics Data System (ADS)

    Morgan, Abby W.

    The use of gelatin for growth factor delivery was investigated. Protein-gelatin interactions were characterized using the Biomolecular Interaction Detection (BIND) system. Acidic gelatin sheets and basic gelatin microspheres were fabricated and optimized for delivering transforming growth factor (TGF)-beta1 and bone morphogenetic protein (BMP)-2. The two delivery vehicles were then combined to produce two distinct release sequences and the effect of sequence on bone healing was determined. Using the BIND system, TGF-beta1 was found to interact more strongly with acidic gelatin than basic gelatin whereas BMP-2 only slightly favors basic gelatin over acidic gelatin. Acidic gelatin sheets were fabricated by a casting technique. These sheets successfully delivered TGF-beta1 to a rabbit ulna defect to encourage new bone formation. Basic gelatin microspheres were fabricated by the precision particle fabrication (PPF) method. Uniform drug distribution within the microspheres lead to controlled release of BMP-2 that induced bone formation within the thigh muscle of mice. The sheets and microspheres were combined to deliver both drugs either simultaneously or with a four-day delay to a rabbit calvarial defect. Both sequences encouraged more bone regeneration than empty defects by 8 weeks. Protein-gelatin interactions improved protein stability and lead to release through enzymatic degradation of the gelatin. Growth factors released either singly or in a dual system from gelatin successfully produced bone in vivo. However, single release systems require higher dosages to achieve similar healing results as observed in the dual release systems. No difference was observed between the dual release systems investigated.

  7. Basics and recent advances in peptide and protein drug delivery

    PubMed Central

    Bruno, Benjamin J; Miller, Geoffrey D; Lim, Carol S

    2014-01-01

    While the peptide and protein therapeutic market has developed significantly in the past decades, delivery has limited their use. Although oral delivery is preferred, most are currently delivered intravenously or subcutaneously due to degradation and limited absorption in the gastrointestinal tract. Therefore, absorption enhancers, enzyme inhibitors, carrier systems and stability enhancers are being studied to facilitate oral peptide delivery. Additionally, transdermal peptide delivery avoids the issues of the gastrointestinal tract, but also faces absorption limitations. Due to proteases, opsonization and agglutination, free peptides are not systemically stable without modifications. This review discusses oral and transdermal peptide drug delivery, focusing on barriers and solutions to absorption and stability issues. Methods to increase systemic stability and site-specific delivery are also discussed. PMID:24228993

  8. Porous Carriers for Controlled/Modulated Drug Delivery

    PubMed Central

    Ahuja, G.; Pathak, K.

    2009-01-01

    Considerable research efforts have been directed in recent years towards the development of porous carriers as controlled drug delivery matrices because of possessing several features such as stable uniform porous structure, high surface area, tunable pore size and well-defined surface properties. Owing to wide range of useful properties porous carriers have been used in pharmaceuticals for many purposes including development of floating drug delivery systems, sustained drug delivery systems. Various types of pores like open, closed, transport and blind pores in the porous solid allow them to adsorb drugs and release them in a more reproducible and predictable manner. Pharmaceutically exploited porous adsorbents includes, silica (mesoporous), ethylene vinyl acetate (macroporous), polypropylene foam powder (microporous), titanium dioxide (nanoporous). When porous polymeric drug delivery system is placed in contact with appropriate dissolution medium, release of drug to medium must be preceded by the drug dissolution in the water filled pores or from surface and by diffusion through the water filled channels. The porous carriers are used to improve the oral bioavailability of poorly water soluble drugs, to increase the dissolution of relatively insoluble powders and conversion of crystalline state to amorphous state. PMID:20376211

  9. The potential of magneto-electric nanocarriers for drug delivery

    PubMed Central

    Kaushik, Ajeet; Jayant, Rahul Dev; Sagar, Vidya; Nair, Madhavan

    2015-01-01

    Introduction The development and design of personalized nanomedicine for better health quality is receiving great attention. In order to deliver and release a therapeutic concentration at the target site, novel nanocarriers (NCs) were designed, for example, magneto-electric (ME) which possess ideal properties of high drug loading, site-specificity and precise on-demand controlled drug delivery. Areas covered This review explores the potential of ME-NCs for on-demand and site-specific drug delivery and release for personalized therapeutics. The main features including effect of magnetism, improvement in drug loading, drug transport across blood-brain barriers and on-demand controlled release are also discussed. The future directions and possible impacts on upcoming nanomedicine are highlighted. Expert opinion Numerous reports suggest that there is an urgent need to explore novel NC formulations for safe and targeted drug delivery and release at specific disease sites. The challenges of formulation lie in the development of NCs that improve biocompatibility and surface modifications for optimum drug loading/preservation/transmigration and tailoring of electrical–magnetic properties for on-demand drug release. Thus, the development of novel NCs is anticipated to overcome the problems of targeted delivery of therapeutic agents with desired precision that may lead to better patient compliance. PMID:24986772

  10. Targeted drug delivery and enhanced intracellular release using functionalized liposomes

    NASA Astrophysics Data System (ADS)

    Garg, Ashish

    The ability to target cancer cells using an appropriate drug delivery system can significantly reduce the associated side effects from cancer therapies and can help in improving the overall quality of life, post cancer survival. Integrin alpha5beta1 is expressed on several types of cancer cells, including colon cancer and plays an important role in tumor growth and metastasis. Thus, the ability to target the integrin alpha 5beta1 using an appropriate drug delivery nano-vector can significantly help in inhibiting tumor growth and reducing tumor metastasis. The work in this thesis focuses on designing and optimizing, functionalized stealth liposomes (liposomes covered with polyethylene glycol (PEG)) that specifically target the integrin alpha5beta1. The PEG provides a steric barrier allowing the liposomes to circulate in the blood for longer duration and the functionalizing moiety, PR_b peptide specifically recognizes and binds to integrin alpha5beta1 expressing cells. The work demonstrates that by optimizing the amount of PEG and PR_b on the liposomal interface, nano-vectors can be engineered that bind to CT26.WT colon cancer cells in a specific manner and internalize through alpha 5beta1-mediated endocytosis. To further improve the efficacy of the system, PR_b functionalized pH-sensitive stealth liposomes that exhibit triggered release under mild acidic conditions present in endocytotic vesicles were designed. The study showed that PR_b functionalized pH-sensitive stealth liposomes, undergo destabilization under mildly acidic conditions and incorporation of the PR_b peptide does not significantly affect the pH-sensitivity of the liposomes. PR_b functionalized pH-sensitive stealth liposomes bind to CT26.WT colon carcinoma cells that express integrin alpha5beta 1, undergo cellular internalization, and release their load intracellularly in a short period of time as compared to other formulations. PR_b-targeted pH-sensitive stealth liposomes encapsulating 5

  11. Nano-sized platforms for vaginal drug delivery.

    PubMed

    El-Hammadi, Mazen M; Arias, Jose L

    2015-01-01

    Nano-sized systems have shown promise for efficient vaginal drug delivery providing sustained drug release and enhanced permeation. In parallel with advancements in drug discovery of new vaginal therapeutic agents, such as peptides, proteins, nucleic material, antigens, hormones, and microbicides, nanoplatforms are gaining momentum as prospective vectors for these agents. Thus far, extensive research in this arena has been focused on local delivery to the mucus vagina. However, an improved understanding of vaginal route, advantages offered by the vaginal route including being non-invasive and bypassing hepatic first-effect metabolism, and recent success achieved by vaginal drug nanocarriers may open the door for extensive nanotechnology- based research to explore the viability of systemic administration via this route. The review analyzes the possibilities given by nanoplatform-based delivery systems in the vaginal delivery of active agents. Special insight is given to the most important aspects to be considered during nanomedicine development and preclinical evaluation, i.e., the anatomy and physiology of the vagina, advantages of vaginal route of drug administration, and barriers to vaginal drug delivery. Finally, an updated analysis of the recent advancements of nanomedicine technologies and their potential progress into the clinic is compiled in this work.

  12. Hydrazone linkages in pH responsive drug delivery systems.

    PubMed

    Sonawane, Sandeep J; Kalhapure, Rahul S; Govender, Thirumala

    2017-03-01

    Stimuli-responsive polymeric drug delivery systems using various triggers to release the drug at the sites have become a major focus area. Among various stimuli-responsive materials, pH-responsiveness has been studied extensively. The materials used for fabricating pH-responsive drug delivery systems include a specific chemical functionality in their structure that can respond to changes in the pH of the surrounding environment. Various chemical functionalities, for example, acetal, amine, ortho ester, amine and hydrazone, have been used to design materials that are capable of releasing their payload at the acidic pH conditions of the tumor or infection sites. Hydrazone linkages are significant synthons for numerous transformations and have gained importance in pharmaceutical sciences due to their various biological and clinical applications. These linkages have been employed in various drug delivery vehicles, such as linear polymers, star shaped polymers, dendrimers, micelles, liposomes and inorganic nanoparticles, for pH-responsive drug delivery. This review paper focuses on the synthesis and characterization methods of hydrazone bond containing materials and their applications in pH-responsive drug delivery systems. It provides detailed suggestions as guidelines to materials and formulation scientists for designing biocompatible pH-responsive materials with hydrazone linkages and identifying future studies.

  13. Drug Delivery Systems for Imaging and Therapy of Parkinson's Disease

    PubMed Central

    Gunay, Mine Silindir; Ozer, A. Yekta; Chalon, Sylvie

    2016-01-01

    Background: Although a variety of therapeutic approaches are available for the treatment of Parkinson’s disease, challenges limit effective therapy. Among these challenges are delivery of drugs through the blood brain barier to the target brain tissue and the side effects observed during long term administration of antiparkinsonian drugs. The use of drug delivery systems such as liposomes, niosomes, micelles, nanoparticles, nanocapsules, gold nanoparticles, microspheres, microcapsules, nanobubbles, microbubbles and dendrimers is being investigated for diagnosis and therapy. Methods: This review focuses on formulation, development and advantages of nanosized drug delivery systems which can penetrate the central nervous system for the therapy and/or diagnosis of PD, and highlights future nanotechnological approaches. Results: It is esential to deliver a sufficient amount of either therapeutic or radiocontrast agents to the brain in order to provide the best possible efficacy or imaging without undesired degradation of the agent. Current treatments focus on motor symptoms, but these treatments generally do not deal with modifying the course of Parkinson’s disease. Beyond pharmacological therapy, the identification of abnormal proteins such as α-synuclein, parkin or leucine-rich repeat serine/threonine protein kinase 2 could represent promising alternative targets for molecular imaging and therapy of Parkinson's disease. Conclusion: Nanotechnology and nanosized drug delivery systems are being investigated intensely and could have potential effect for Parkinson’s disease. The improvement of drug delivery systems could dramatically enhance the effectiveness of Parkinson’s Disease therapy and reduce its side effects. PMID:26714584

  14. Soft Interaction in Liposome Nanocarriers for Therapeutic Drug Delivery

    PubMed Central

    Lombardo, Domenico; Calandra, Pietro; Barreca, Davide; Magazù, Salvatore; Kiselev, Mikhail A.

    2016-01-01

    The development of smart nanocarriers for the delivery of therapeutic drugs has experienced considerable expansion in recent decades, with the development of new medicines devoted to cancer treatment. In this respect a wide range of strategies can be developed by employing liposome nanocarriers with desired physico-chemical properties that, by exploiting a combination of a number of suitable soft interactions, can facilitate the transit through the biological barriers from the point of administration up to the site of drug action. As a result, the materials engineer has generated through the bottom up approach a variety of supramolecular nanocarriers for the encapsulation and controlled delivery of therapeutics which have revealed beneficial developments for stabilizing drug compounds, overcoming impediments to cellular and tissue uptake, and improving biodistribution of therapeutic compounds to target sites. Herein we present recent advances in liposome drug delivery by analyzing the main structural features of liposome nanocarriers which strongly influence their interaction in solution. More specifically, we will focus on the analysis of the relevant soft interactions involved in drug delivery processes which are responsible of main behaviour of soft nanocarriers in complex physiological fluids. Investigation of the interaction between liposomes at the molecular level can be considered an important platform for the modeling of the molecular recognition processes occurring between cells. Some relevant strategies to overcome the biological barriers during the drug delivery of the nanocarriers are presented which outline the main structure-properties relationships as well as their advantages (and drawbacks) in therapeutic and biomedical applications. PMID:28335253

  15. Strategies for Enhanced Drug Delivery to the Central Nervous System

    PubMed Central

    Dwibhashyam, V. S. N. M.; Nagappa, A. N.

    2008-01-01

    Treating central nervous system diseases is very challenging because of the presence of a variety of formidable obstacles that impede drug delivery. Physiological barriers like the blood-brain barrier and blood-cerebrospinal fluid barrier as well as various efflux transporter proteins make the entry of drugs into the central nervous system very difficult. The present review provides a brief account of the blood brain barrier, the P-glycoprotein efflux and various strategies for enhancing drug delivery to the central nervous system. PMID:20046703

  16. Chitosan nanoparticles for oral drug and gene delivery

    PubMed Central

    Bowman, Katherine; Leong, Kam W

    2006-01-01

    Chitosan is a widely available, mucoadhesive polymer that is able to increase cellular permeability and improve the bioavailability of orally administered protein drugs. It can also be readily formed into nanoparticles able to entrap drugs or condense plasmid DNA. Studies on the formulation and oral delivery of such chitosan nanoparticles have demonstrated their efficacy in enhancing drug uptake and promoting gene expression. This review summarizes some of these findings and highlights the potential of chitosan as a component of oral delivery systems. PMID:17722528

  17. Drug delivery systems improve pharmaceutical profile and facilitate medication adherence.

    PubMed

    Wertheimer, Albert I; Santella, Thomas M; Finestone, Albert J; Levy, Richard A

    2005-01-01

    Innovations in dosage forms and dose delivery systems across a wide range of medications offer substantial clinical advantages, including reduced dosing frequency and improved patient adherence; minimized fluctuation of drug concentrations and maintenance of blood levels within a desired range; localized drug delivery; and the potential for reduced adverse effects and increased safety. The advent of new large-molecule drugs for previously untreatable or only partially treatable diseases is stimulating the development of suitable delivery systems for these agents. Although advanced formulations may be more expensive than conventional dosage forms, they often have a more favorable pharmacologic profile and can be cost-effective. Inclusion of these dosage forms on drug formulary lists may help patients remain on therapy and reduce the economic and social burden of care.

  18. Crystallization Methods for Preparation of Nanocrystals for Drug Delivery System.

    PubMed

    Gao, Yuan; Wang, Jingkang; Wang, Yongli; Yin, Qiuxiang; Glennon, Brian; Zhong, Jian; Ouyang, Jinbo; Huang, Xin; Hao, Hongxun

    2015-01-01

    Low water solubility of drug products causes delivery problems such as low bioavailability. The reduced particle size and increased surface area of nanocrystals lead to the increasing of the dissolution rate. The formulation of drug nanocrystals is a robust approach and has been widely applied to drug delivery system (DDS) due to the significant development of nanoscience and nanotechnology. It can be used to improve drug efficacy, provide targeted delivery and minimize side-effects. Crystallization is the main and efficient unit operation to produce nanocrystals. Both traditional crystallization methods such as reactive crystallization, anti-solvent crystallization and new crystallization methods such as supercritical fluid crystallization, high-gravity controlled precipitation can be used to produce nanocrystals. The current mini-review outlines the main crystallization methods addressed in literature. The advantages and disadvantages of each method were summarized and compared.

  19. Recent advances in liposome surface modification for oral drug delivery.

    PubMed

    Nguyen, Thanh Xuan; Huang, Lin; Gauthier, Mario; Yang, Guang; Wang, Qun

    2016-05-01

    Oral delivery via the gastrointestinal (GI) tract is the dominant route for drug administration. Orally delivered liposomal carriers can enhance drug solubility and protect the encapsulated theraputic agents from the extreme conditions found in the GI tract. Liposomes, with their fluid lipid bilayer membrane and their nanoscale size, can significantly improve oral absorption. Unfortunately, the clinical applications of conventional liposomes have been hindered due to their poor stability and availability under the harsh conditions typically presented in the GI tract. To overcome this problem, the surface modification of liposomes has been investigated. Although liposome surface modification has been extensively studied for oral drug delivery, no review exists so far that adequately covers this topic. The purpose of this paper is to summarize and critically analyze emerging trends in liposome surface modification for oral drug delivery.

  20. Micro and Nanoparticle Drug Delivery Systems for Preventing Allotransplant Rejection

    PubMed Central

    Fisher, James D.; Acharya, Abhinav P.; Little, Steven R.

    2015-01-01

    Despite decades of advances in transplant immunology, tissue damage caused by acute allograft rejection remains the primary cause of morbidity and mortality in the transplant recipient. Moreover, the long-term sequelae of lifelong immunosuppression leaves patients at risk for developing a host of other deleterious conditions. Controlled drug delivery using micro- and nanoparticles (MNPs) is an effective way to deliver higher local doses of a given drug to specific tissues and cells while mitigating systemic effects. Herein, we review several descriptions of MNP immunotherapies aimed at prolonging allograft survival. We also discuss developments in the field of biomimetic drug delivery that use MNP constructs to induce and recruit our bodies' own suppressive immune cells. Finally, we comment on the regulatory pathway associated with these drug delivery systems. Collectively, it is our hope the studies described in this review will help to usher in a new era of immunotherapy in organ transplantation. PMID:25937032

  1. Biodegradation-tunable mesoporous silica nanorods for controlled drug delivery.

    PubMed

    Park, Sung Bum; Joo, Young-Ho; Kim, Hyunryung; Ryu, WonHyoung; Park, Yong-il

    2015-05-01

    Mesoporous silica in the forms of micro- or nanoparticles showed great potentials in the field of controlled drug delivery. However, for precision control of drug release from mesoporous silica-based delivery systems, it is critical to control the rate of biodegradation. Thus, in this study, we demonstrate a simple and robust method to fabricate "biodegradation-tunable" mesoporous silica nanorods based on capillary wetting of anodic aluminum oxide (AAO) template with an aqueous alkoxide precursor solution. The porosity and nanostructure of silica nanorods were conveniently controlled by adjusting the water/alkoxide molar ratio of precursor solutions, heat-treatment temperature, and Na addition. The porosity and biodegradation kinetics of the fabricated mesoporous nanorods were analyzed using N2 adsorption/desorption isotherm, TGA, DTA, and XRD. Finally, the performance of the mesoporous silica nanorods as drug delivery carrier was demonstrated with initial burst and subsequent "zero-order" release of anti-cancer drug, doxorubicin.

  2. Design of Nanoparticle-Based Carriers for Targeted Drug Delivery

    PubMed Central

    Ren, Muqing; Duval, Kayla; Guo, Xing; Chen, Zi

    2016-01-01

    Nanoparticles have shown promise as both drug delivery vehicles and direct antitumor systems, but they must be properly designed in order to maximize efficacy. Computational modeling is often used both to design new nanoparticles and to better understand existing ones. Modeled processes include the release of drugs at the tumor site and the physical interaction between the nanoparticle and cancer cells. In this article, we provide an overview of three different targeted drug delivery methods (passive targeting, active targeting and physical targeting), compare methods of action, advantages, limitations, and the current stage of research. For the most commonly used nanoparticle carriers, fabrication methods are also reviewed. This is followed by a review of computational simulations and models on nanoparticle-based drug delivery. PMID:27398083

  3. Emerging application of quantum dots for drug delivery and therapy.

    PubMed

    Qi, Lifeng; Gao, Xiaohu

    2008-03-01

    Quantum dots have proven themselves as powerful fluorescent probes, especially for long-term, multiplexed, and quantitative imaging and detection. Newly engineered quantum dots with integrated targeting, imaging and therapeutic functionalities have become excellent material to study drug delivery in cells and small animals. This fluorescent 'prototype' will provide important information in the rational design of biocompatible drug carriers and will serve as a superior alternative to magnetic and radioactive imaging contrast agents in preclinical drug screening, validation and delivery research. This Editorial article is not intended to offer a comprehensive review on drug delivery, but to highlight the breakthroughs in the emerging applications of quantum dots in this field and to provide our perspective on future research.

  4. Hydrogel-Forming Microneedle Arrays for Enhanced Transdermal Drug Delivery

    PubMed Central

    Donnelly, Ryan F; Singh, Thakur Raghu Raj; Garland, Martin J; Migalska, Katarzyna; Majithiya, Rita; McCrudden, Cian M; Kole, Prashant Laxman; Mahmood, Tuan Mazlelaa Tuan; McCarthy, Helen O; Woolfson, A David

    2012-01-01

    Unique microneedle arrays prepared from crosslinked polymers, which contain no drug themselves, are described. They rapidly take up skin interstitial fluid upon skin insertion to form continuous, unblockable, hydrogel conduits from attached patch-type drug reservoirs to the dermal microcirculation. Importantly, such microneedles, which can be fabricated in a wide range of patch sizes and microneedle geometries, can be easily sterilized, resist hole closure while in place, and are removed completely intact from the skin. Delivery of macromolecules is no longer limited to what can be loaded into the microneedles themselves and transdermal drug delivery is now controlled by the crosslink density of the hydrogel system rather than the stratum corneum, while electrically modulated delivery is also a unique feature. This technology has the potential to overcome the limitations of conventional microneedle designs and greatly increase the range of the type of drug that is deliverable transdermally, with ensuing benefits for industry, healthcare providers and, ultimately, patients. PMID:23606824

  5. Dissolving Microneedles for Transdermal Drug Delivery

    PubMed Central

    Lee, Jeong Woo; Park, Jung-Hwan; Prausnitz, Mark R.

    2008-01-01

    Microfabrication technology has been adapted to produce micron-scale needles as a safer and painless alternative to hypodermic needle injection, especially for protein biotherapeutics and vaccines. This study presents a design that encapsulates molecules within microneedles that dissolve within the skin for bolus or sustained delivery and leave behind no biohazardous sharp medical waste. A fabrication process was developed based on casting a viscous aqueous solution during centrifugation to fill a micro-fabricated mold with biocompatible carboxymethylcellulose or amylopectin formulations. This process encapsulated sulforhodamine B, bovine serum albumin, and lysozyme; lysozyme was shown to retain full enzymatic activity after encapsulation and to remain 96% active after storage for two months at room temperature. Microneedles were also shown to be strong enough to insert into cadaver skin and then to dissolve within minutes. Bolus delivery was achieved by encapsulating molecules just within microneedle shafts. For the first time, sustained delivery over hours to days was achieved by encapsulating molecules within the microneedle backing, which served as a controlled release reservoir that delivered molecules by a combination of swelling the backing with interstitial fluid drawn out of the skin and molecule diffusion into the skin via channels formed by dissolved microneedles. We conclude that dissolving microneedles can be designed to gently encapsulate molecules, insert into skin, and enable bolus or sustained release delivery. PMID:18261792

  6. Use of microwave in processing of drug delivery systems.

    PubMed

    Wong, T W

    2008-04-01

    Microwave has received a widespread application in pharmaceuticals and food processing, microbial sterilization, biomedical therapy, scientific and biomedical analysis, as well as, drug synthesis. This paper reviews the basis of application of microwave to prepare pharmaceutical dosage forms such as agglomerates, gel beads, microspheres, nanomatrix, solid dispersion, tablets and film coat. The microwave could induce drying, polymeric crosslinkages as well as drug-polymer interaction, and modify the structure of drug crystallites via its effects of heating and/or electromagnetic field on the dosage forms. The use of microwave opens a new approach to control the physicochemical properties and drug delivery profiles of pharmaceutical dosage forms without the need for excessive heat, lengthy process or toxic reactants. Alternatively, the microwave can be utilized to process excipients prior to their use in the formulation of drug delivery systems. The intended release characteristics of drugs in dosage forms can be met through modifying the physicochemical properties of excipients using the microwave.

  7. Optimizing Cancer Care Delivery through Implementation Science

    PubMed Central

    Adesoye, Taiwo; Greenberg, Caprice C.; Neuman, Heather B.

    2016-01-01

    The 2013 Institute of Medicine report investigating cancer care concluded that the cancer care delivery system is in crisis due to an increased demand for care, increasing complexity of treatment, decreasing work force, and rising costs. Engaging patients and incorporating evidence-based care into routine clinical practice are essential components of a high-quality cancer delivery system. However, a gap currently exists between the identification of beneficial research findings and the application in clinical practice. Implementation research strives to address this gap. In this review, we discuss key components of high-quality implementation research. We then apply these concepts to a current cancer care delivery challenge in women’s health, specifically the implementation of a surgery decision aid for women newly diagnosed with breast cancer. PMID:26858933

  8. Experimental and simulation studies on focused ultrasound triggered drug delivery.

    PubMed

    Jin, Zhen; Choi, Yongjin; Ko, Seong Young; Park, Jong-Oh; Park, Sukho

    2017-01-01

    To improve drug delivery efficiency in cancer therapy, many researchers have recently concentrated on drug delivery systems that use anticancer drug loaded micro- or nanoparticles. In addition, induction methods, such as ultrasound, magnetic field, and infrared light, have been considered as active induction methods for drug delivery. Among these, focused ultrasound has been regarded as a promising candidate for the active induction method of drug delivery system because it can penetrate a deep site in soft tissue, and its energy can be focused on the targeted lesion. In this research, we employed focused ultrasound as an active induction method. For an anticancer drug loaded microparticles, we fabricated poly-lactic-co-glycolic acid docetaxel (PLGA-DTX) nanoparticle encapsulated alginate microbeads using the single-emulsion technique and the aeration method. To select the appropriate operating parameter for the focused ultrasound, we measured the pressure and temperature induced by the focused ultrasound at the focal area using a needle-type hydrophone and a digital thermal detector, respectively. Additionally, we conducted a simulation of focused ultrasound using COMSOL Multiphysics 4.3a. The experimental measurement results were compared with the simulation results. In addition, the drug release rates of the PLGA-DTX-encapsulated alginate microbeads induced by the focused ultrasound were tested. Through these experiments, we determined that the appropriate focused ultrasound parameter was peak pressure of 1 MPa, 10 cycle/burst, and burst period of 20 μSec. Finally, we performed the cell cytotoxicity and drug uptake test with focused ultrasound induction and found that the antitumor effect and drug uptake efficiency were significantly enhanced by the focused ultrasound induction. Thus, we confirmed that focused ultrasound can be an effective induction method for an anticancer drug delivery system.

  9. Positron Emission Tomography Image-Guided Drug Delivery: Current Status and Future Perspectives

    PubMed Central

    2015-01-01

    Positron emission tomography (PET) is an important modality in the field of molecular imaging, which is gradually impacting patient care by providing safe, fast, and reliable techniques that help to alter the course of patient care by revealing invasive, de facto procedures to be unnecessary or rendering them obsolete. Also, PET provides a key connection between the molecular mechanisms involved in the pathophysiology of disease and the according targeted therapies. Recently, PET imaging is also gaining ground in the field of drug delivery. Current drug delivery research is focused on developing novel drug delivery systems with emphasis on precise targeting, accurate dose delivery, and minimal toxicity in order to achieve maximum therapeutic efficacy. At the intersection between PET imaging and controlled drug delivery, interest has grown in combining both these paradigms into clinically effective formulations. PET image-guided drug delivery has great potential to revolutionize patient care by in vivo assessment of drug biodistribution and accumulation at the target site and real-time monitoring of the therapeutic outcome. The expected end point of this approach is to provide fundamental support for the optimization of innovative diagnostic and therapeutic strategies that could contribute to emerging concepts in the field of “personalized medicine”. This review focuses on the recent developments in PET image-guided drug delivery and discusses intriguing opportunities for future development. The preclinical data reported to date are quite promising, and it is evident that such strategies in cancer management hold promise for clinically translatable advances that can positively impact the overall diagnostic and therapeutic processes and result in enhanced quality of life for cancer patients. PMID:24865108

  10. Smart surface-enhanced Raman scattering traceable drug delivery systems

    NASA Astrophysics Data System (ADS)

    Liu, Lei; Tang, Yonghong; Dai, Sheng; Kleitz, Freddy; Qiao, Shi Zhang

    2016-06-01

    A novel smart nanoparticle-based system has been developed for tracking intracellular drug delivery through surface-enhanced Raman scattering (SERS). This new drug delivery system (DDS) shows targeted cytotoxicity towards cancer cells via pH-cleavable covalent carboxylic hydrazone links and the SERS tracing capability based on gold@silica nanocarriers. Doxorubicin, as a model anticancer drug, was employed to compare SERS with conventional fluorescence tracing approaches. It is evident that SERS demonstrates higher sensitivity and resolution, revealing intracellular details, as the strengths of the original Raman signals can be amplified by SERS. Importantly, non-destructive SERS will provide the designed DDS with great autonomy and potential to study the dynamic procedures of non-fluorescent drug delivery into living cells.A novel smart nanoparticle-based system has been developed for tracking intracellular drug delivery through surface-enhanced Raman scattering (SERS). This new drug delivery system (DDS) shows targeted cytotoxicity towards cancer cells via pH-cleavable covalent carboxylic hydrazone links and the SERS tracing capability based on gold@silica nanocarriers. Doxorubicin, as a model anticancer drug, was employed to compare SERS with conventional fluorescence tracing approaches. It is evident that SERS demonstrates higher sensitivity and resolution, revealing intracellular details, as the strengths of the original Raman signals can be amplified by SERS. Importantly, non-destructive SERS will provide the designed DDS with great autonomy and potential to study the dynamic procedures of non-fluorescent drug delivery into living cells. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr03869g

  11. Development of a Microfluidics-Based Intracochlear Drug Delivery Device

    PubMed Central

    Sewell, William F.; Borenstein, Jeffrey T.; Chen, Zhiqiang; Fiering, Jason; Handzel, Ophir; Holmboe, Maria; Kim, Ernest S.; Kujawa, Sharon G.; McKenna, Michael J.; Mescher, Mark M.; Murphy, Brian; Leary Swan, Erin E.; Peppi, Marcello; Tao, Sarah

    2009-01-01

    Background Direct delivery of drugs and other agents into the inner ear will be important for many emerging therapies, including the treatment of degenerative disorders and guiding regeneration. Methods We have taken a microfluidics/MEMS (MicroElectroMechanical Systems) technology approach to develop a fully implantable reciprocating inner-ear drug-delivery system capable of timed and sequenced delivery of agents directly into perilymph of the cochlea. Iterations of the device were tested in guinea pigs to determine the flow characteristics required for safe and effective delivery. For these tests, we used the glutamate receptor blocker DNQX, which alters auditory nerve responses but not cochlear distortion product otoacoustic emissions. Results We have demonstrated safe and effective delivery of agents into the scala tympani. Equilibration of the drug in the basal turn occurs rapidly (within tens of minutes) and is dependent on reciprocating flow parameters. Conclusion We have described a prototype system for the direct delivery of drugs to the inner ear that has the potential to be a fully implantable means for safe and effective treatment of hearing loss and other diseases. PMID:19923811

  12. Nanotechnology-based drug delivery systems for the treatment of Alzheimer’s disease

    PubMed Central

    Fonseca-Santos, Bruno; Gremião, Maria Palmira Daflon; Chorilli, Marlus

    2015-01-01

    Alzheimer’s disease is a neurological disorder that results in cognitive and behavioral impairment. Conventional treatment strategies, such as acetylcholinesterase inhibitor drugs, often fail due to their poor solubility, lower bioavailability, and ineffective ability to cross the blood–brain barrier. Nanotechnological treatment methods, which involve the design, characterization, production, and application of nanoscale drug delivery systems, have been employed to optimize therapeutics. These nanotechnologies include polymeric nanoparticles, solid lipid nanoparticles, nanostructured lipid carriers, microemulsion, nanoemulsion, and liquid crystals. Each of these are promising tools for the delivery of therapeutic devices to the brain via various routes of administration, particularly the intranasal route. The objective of this study is to present a systematic review of nanotechnology-based drug delivery systems for the treatment of Alzheimer’s disease. PMID:26345528

  13. Using DNA nanotechnology to produce a drug delivery system

    NASA Astrophysics Data System (ADS)

    Huyen La, Thi; Thu Thuy Nguyen, Thi; Phuc Pham, Van; Huyen Nguyen, Thi Minh; Huan Le, Quang

    2013-03-01

    Drug delivery to cancer cells in chemotherapy is one of the most advanced research topics. The effectiveness of the current cancer treatment drugs is limited because they are not capable of distinguishing between cancer cells and normal cells so that they kill not only cancer cells but also normal ones. To overcome this disadvantage by profiting from the differences in physical and chemical properties between cancer and normal cells, nanoparticles (NPs) delivering a drug are designed in a specific manner such that they can distinguish the cancer cells from the normal ones and are targeted only to the cancer cells. Currently, there are various drug delivery systems with many advantages, but sharing some common disadvantages such as difficulty with controlling the size, low encapsulation capacity and low stability. With the development and success of DNA nanotechnology, DNA strands are used to create effective drug delivery NPs with precisely controlled size and structure, safety and high stability. This article presents our study on drug encapsulation in DNA nanostructure which loaded docetaxel and curcumin in a desire to create a new and effective drug delivery system with high biological compatibility. Invited talk at the 6th International Workshop on Advanced Materials Science and Nanotechnology, 30 October-2 November, 2012, Ha Long, Vietnam.

  14. An emerging platform for drug delivery: aerogel based systems.

    PubMed

    Ulker, Zeynep; Erkey, Can

    2014-03-10

    Over the past few decades, advances in "aerogel science" have provoked an increasing interest for these materials in pharmaceutical sciences for drug delivery applications. Because of their high surface areas, high porosities and open pore structures which can be tuned and controlled by manipulation of synthesis conditions, nanostructured aerogels represent a promising class of materials for delivery of various drugs as well as enzymes and proteins. Along with biocompatible inorganic aerogels and biodegradable organic aerogels, more complex systems such as surface functionalized aerogels, composite aerogels and layered aerogels have also been under development and possess huge potential. Emphasis is given to the details of the aerogel synthesis and drug loading methods as well as the influence of synthesis parameters and loading methods on the adsorption and release of the drugs. Owing to their ability to increase the bioavailability of low solubility drugs, to improve both their stability and their release kinetics, there are an increasing number of research articles concerning aerogels in different drug delivery applications. This review presents an up to date overview of the advances in all kinds of aerogel based drug delivery systems which are currently under investigation.

  15. Silicon-polymer hybrid materials for drug delivery.

    PubMed

    McInnes, Steven J P; Voelcker, Nicolas H

    2009-09-01

    Silicon and its oxides are widely used in biomaterials research, tissue engineering and drug delivery. These materials are highly biocompatible, easily surface functionalized, degrade into nontoxic silicic acid and can be processed into various forms such as micro- and nano-particles, monoliths, membranes and micromachined structures. The large surface area of porous forms of silicon and silica (up to 1200 m2/g) permits high drug loadings. The degradation kinetics of silicon- and silica-based materials can be tailored by coating or grafting with polymers. Incorporation of polymers also improves control over drug-release kinetics. The use of stimuli-responsive polymers has enabled environmental stimuli-triggered drug release. Simultaneously, silicon microfabrication techniques have facilitated the development of sophisticated implantable drug-delivery microdevices. This paper reviews the synthesis, novel properties and biomedical applications of silicon-polymer hybrid materials with particular emphasis on drug delivery. The biocompatible and bioresorptive properties of mesoporous silica and porous silicon make these materials attractive candidates for use in biomedical applications. The combination of polymers with silicon-based materials has generated a large range of novel hybrid materials tailored to applications in localized and systemic drug delivery.

  16. Insights into drug delivery across the nail plate barrier.

    PubMed

    Saner, Manish V; Kulkarni, Abhijeet D; Pardeshi, Chandrakantsing V

    2014-11-01

    Topical therapy is at the forefront in treating nail ailments (especially onychomycosis and nail psoriasis) due to its local effects, which circumvents systemic adverse events, improves patient compliance and reduces treatment cost. However, the success of topical therapy has been hindered due to poor penetration of topical therapeutics across densely keratinized nail plate barrier. For effective topical therapy across nail plate, ungual drug permeation must be enhanced. Present review is designed to provide an insight into prime aspects of transungual drug delivery viz. nail structure and physiology, various onychopathies, techniques of nail permeation enhancement and in vitro models for trans-nail drug permeation studies. Updated list of drug molecules studied across the nail plate and key commercial products have been furnished with sufficient depth. Patents pertinent to, and current clinical status of transungual drug delivery have also been comprehensively reviewed. This is the first systematic critique encompassing the detailed aspects of transungual drug delivery. In our opinion, transungual drug delivery is a promising avenue for researchers to develop novel formulations, augmenting pharmaceutical industries to commercialize the products for nail disorders.

  17. In-silico simulations of advanced drug delivery systems: what will the future offer?

    PubMed

    Siepmann, Juergen

    2013-09-15

    This commentary enlarges on some of the topics addressed in the Position Paper "Towards more effective advanced drug delivery systems" by Crommelin and Florence (2013). Inter alia, the role of mathematical modeling and computer-assisted device design is briefly addressed in the Position Paper. This emerging and particularly promising field is considered in more depth in this commentary. In fact, in-silico simulations have become of fundamental importance in numerous scientific and related domains, allowing for a better understanding of various phenomena and for facilitated device design. The development of novel prototypes of space shuttles, nuclear power plants and automobiles are just a few examples. In-silico simulations are nowadays also well established in the field of pharmacokinetics/pharmacodynamics (PK/PD) and have become an integral part of the discovery and development process of novel drug products. Since Takeru Higuchi published his seminal equation in 1961 the use of mathematical models for the analysis and optimization of drug delivery systems in vitro has also become more and more popular. However, applying in-silico simulations for facilitated optimization of advanced drug delivery systems is not yet common practice. One of the reasons is the gap between in vitro and in vivo (PK/PD) simulations. In the future it can be expected that this gap will be closed and that computer assisted device design will play a central role in the research on, and development of advanced drug delivery systems.

  18. Silk Fibroin-Based Nanoparticles for Drug Delivery

    PubMed Central

    Zhao, Zheng; Li, Yi; Xie, Mao-Bin

    2015-01-01

    Silk fibroin (SF) is a protein-based biomacromolecule with excellent biocompatibility, biodegradability and low immunogenicity. The development of SF-based nanoparticles for drug delivery have received considerable attention due to high binding capacity for various drugs, controlled drug release properties and mild preparation conditions. By adjusting the particle size, the chemical structure and properties, the modified or recombinant SF-based nanoparticles can be designed to improve the therapeutic efficiency of drugs encapsulated into these nanoparticles. Therefore, they can be used to deliver small molecule drugs (e.g., anti-cancer drugs), protein and growth factor drugs, gene drugs, etc. This paper reviews recent progress on SF-based nanoparticles, including chemical structure, properties, and preparation methods. In addition, the applications of SF-based nanoparticles as carriers for therapeutic drugs are also reviewed. PMID:25749470

  19. Novel Nanoprinting for Oral Delivery of Poorly Soluble Drugs

    PubMed Central

    Yilmaz, Cihan; Sarisozen, Can; Torchilin, Vladimir; Busnaina, Ahmed

    2016-01-01

    Many of the newly developed drugs for cancer, and some of those for cardiovascular disease, are poorly soluble in water and cannot be taken orally. This can be overcome by employing a new and effective delivery system utilizing nanotechnology. We present a new method for oral preparation of poorly soluble drugs that entails assembling (printing) drug-loaded polymeric micelles into sub-100 nm orally acceptable nanorods (NRs). Due to their small size, these NRs will have a high permeability through cells and thus should transport through the intestine to allow for drug delivery in the blood. These NRs drugs are expected to penetrate tumors more efficiently and much faster than individual nanoparticles and may also be useful for drug delivery to atherosclerotic plaque. This should lead to better bioavailability of the drug with reduced toxicity and side effects. Currently used micellar formulations are administered intravenously, which is invasive and could be toxic due to high doses and interaction with normal healthy tissues. Oral drug administration is the easiest and most desirable way to deliver most drugs, including those that are poorly soluble. PMID:27826370

  20. A review on therapeutic contact lenses for ocular drug delivery.

    PubMed

    Maulvi, Furqan A; Soni, Tejal G; Shah, Dinesh O

    2016-10-01

    Contact lenses for ophthalmic drug delivery have become very popular, due to their unique advantages like extended wear and more than 50% bioavailability. To achieve controlled and sustained drug delivery from contact lenses, researchers are working on various systems like polymeric nanoparticles, microemulsion, micelle, liposomes, use of vitamin E, etc. Numerous scientists are working on different areas of therapeutic contact lenses to treat ocular diseases by implementing techniques like soaking method, molecular imprinting, entrapment of drug-laden colloidal nanoparticles, drug plate/film, ion ligand polymeric systems, supercritical fluid technology, etc. Though sustained drug delivery was achieved using contact lens, the critical properties such as water content, tensile strength (mechanical properties), ion permeability, transparency and oxygen permeability were altered, which limit the commercialization of therapeutic contact lenses. Also issues like drug stability during processing/fabrication (drug integrity test), zero order release kinetics (prevent burst release), drug release during monomer extraction step after fabrication (to remove un-reacted monomers), protein adherence, drug release during storage in packaging solution, shelf life study, cost-benefit analysis, etc. are still to be addressed. This review provides an expert opinion on different methodology to develop therapeutic contact lenses with special remark of their advantages and limitations.

  1. Targeted Cellular Drug Delivery using Tailored Dendritic Nanostructures

    NASA Astrophysics Data System (ADS)

    Kannan, Rangaramanujam; Kolhe, Parag; Kannan, Sujatha; Lieh-Lai, Mary

    2002-03-01

    Dendrimers and hyperbranched polymers possess highly branched architectures, with a large number of controllable, tailorble, ‘peripheral’ functionalities. Since the surface chemistry of these materials can be modified with relative ease, these materials have tremendous potential in targeted drug and gene delivery. The large number of end groups can also be tailored to create special affinity to targeted cells, and can also encapsulate drugs and deliver them in a controlled manner. We are developing tailor-modified dendritic systems for drug delivery. Synthesis, in-vitro drug loading, in-vitro drug delivery, and the targeting efficiency to the cell are being studied systematically using a wide variety of experimental tools. Polyamidoamine and Polyol dendrimers, with different generations and end-groups are studied, with drugs such as Ibuprofen and Methotrexate. Our results indicate that a large number of drug molecules can be encapsulated/attached to the dendrimers, depending on the end groups. The drug-encapsulated dendrimer is able to enter the cells rapidly and deliver the drug. Targeting strategies being explored

  2. Nanoparticles and nanostructured carriers for drug delivery and contrast enhancement

    NASA Astrophysics Data System (ADS)

    Godage, Olga S.; Bucharskaya, Alla B.; Navolokin, Nikita A.; German, Sergey V.; Zuev, Viktor V.; Terentyuk, Georgy S.; Maslyakova, Galina N.; Gorin, Dmitry A.

    2016-04-01

    Currently, nanotechnologies are widely used in science and industry. It is known that the application of drug delivery nanostructured carriers for biomedicine is one of the promising areas of nanotechnology. Nanostructured carriers can be used in the diagnosis process for detecting a neoplastic tumor cells in peripheral blood, for contrast enhancement on magnetic resonance imaging (MRI), as well as for targeted drug delivery to tumor tissues. Agents for the targeted delivery (nanoparticles, liposomes, microcapsules, and etc) can affect the healthy tissues and organs, cause side effects and have a toxic effect. Therefore, it necessary to study the morphological changes that occur not only in the "target", such as a tumor, but also the internal organs, taking place under the influence of both the agents for targeted drug delivery and physical impact induced remote controlled drug release. Thus , the aim of our work is selection of the most promising agents for targeted drug delivery to tumor and contrast agents for in vivo visualization of tumor tissue boundaries , as well as their impact on the organs and tissues as results of nanostructured object biodistribution.

  3. Novel Strategies for Anterior Segment Ocular Drug Delivery

    PubMed Central

    Cholkar, Kishore; Patel, Sulabh P.; Vadlapudi, Aswani Dutt

    2013-01-01

    Abstract Research advancements in pharmaceutical sciences have led to the development of new strategies in drug delivery to anterior segment. Designing a new delivery system that can efficiently target the diseased anterior ocular tissue, generate high drug levels, and maintain prolonged and effective concentrations with no or minimal side effects is the major focus of current research. Drug delivery by traditional method of administration via topical dosing is impeded by ocular static and dynamic barriers. Various products have been introduced into the market that prolong drug retention in the precorneal pocket and to improve bioavailability. However, there is a need of a delivery system that can provide controlled release to treat chronic ocular diseases with a reduced dosing frequency without causing any visual disturbances. This review provides an overview of anterior ocular barriers along with strategies to overcome these ocular barriers and deliver therapeutic agents to the affected anterior ocular tissue with a special emphasis on nanotechnology-based drug delivery approaches. PMID:23215539

  4. Liposomal drug delivery systems: from concept to clinical applications.

    PubMed

    Allen, Theresa M; Cullis, Pieter R

    2013-01-01

    The first closed bilayer phospholipid systems, called liposomes, were described in 1965 and soon were proposed as drug delivery systems. The pioneering work of countless liposome researchers over almost 5 decades led to the development of important technical advances such as remote drug loading, extrusion for homogeneous size, long-circulating (PEGylated) liposomes, triggered release liposomes, liposomes containing nucleic acid polymers, ligand-targeted liposomes and liposomes containing combinations of drugs. These advances have led to numerous clinical trials in such diverse areas as the delivery of anti-cancer, anti-fungal and antibiotic drugs, the delivery of gene medicines, and the delivery of anesthetics and anti-inflammatory drugs. A number of liposomes (lipidic nanoparticles) are on the market, and many more are in the pipeline. Lipidic nanoparticles are the first nanomedicine delivery system to make the transition from concept to clinical application, and they are now an established technology platform with considerable clinical acceptance. We can look forward to many more clinical products in the future.

  5. Cavitation-induced drug delivery in tumors for cancer chemotherapy: phantom studies

    NASA Astrophysics Data System (ADS)

    Larina, Irina V.; Bartels, Christian; Larin, Kirill V.; Esenaliev, Rinat O.

    2001-07-01

    One of the major problems of cancer chemotherapy is slow diffusion of anti-cancer drugs in the interstitium and their poor penetration from blood through tumor capillary wall and cancer cell membrane. To enhance delivery of the drugs in cancer cells we proposed to use interaction of exogenous microparticles with laser or ultrasonic radiation. This interaction results in cavitation near the particles upon certain irradiation conditions. Our previous pilot studies demonstrated feasibility of enhanced delivery of model and real anti-cancer conditions. Our previous pilot studies demonstrated feasibility of enhanced delivery of model and real anti-cancer drugs in tissues in vitro and in vivo if laser pulsed or ultrasonic radiation is applied. In this work we performed studies in tissue phantoms in order to find optimal parameters that can be used for safe and efficient delivery of anti-cancer drugs in tumors. Water solutions and gelatin were used as tissue phantoms with well-controlled parameters. Cavitation in the phantoms was studied by using optical dn ultrasound techniques. Results of our studies indicate that efficient cavitation-driven drug delivery can be achieved with no or minimal damage to normal tissues.

  6. Mathematical modelling of the release of drug from porous, nonswelling transdermal drug-delivery devices.

    PubMed

    Lee, A J; King, J R; Hibberd, S

    1998-06-01

    A general model is presented for the release of drug from porous nonswelling, transdermal drug-delivery devices and it is shown to reduce to previously proposed models in suitable limits. The processes which govern the release of drug are considered to be diffusion of dissolved drug and dissolution of dispersed drug, both in the body of the device and in the device pores, and transfer of drug between the two domains. In the classical limit of large dissolution rates, the problem reduces to one of the moving-boundary type, and solution of this problem in the case where the initial drug loading is much greater than the drug solubility in the device yields expressions for the flux of drug to a perfect sink (modelling in vitro conditions). It is shown that behaviour greatly differing from the classical first-order drug delivery (alpha t 1/2) may be exhibited, depending upon the parameter regime. In some situations the dissolution rates may not be so large and solutions of the general model are derived in the case where the dispersed drug is considered to be undepleted and the diffusivity in the solvent-filled pores is much larger than in the body of the delivery device. Numerical studies are undertaken, and the coupling of delivery device and skin-diffusion models (in order to model the complete transdermal drug-delivery process) is also considered.

  7. Self-Assembling Peptide Amphiphiles for Targeted Drug Delivery

    NASA Astrophysics Data System (ADS)

    Moyer, Tyson

    The systemic delivery of therapeutics is currently limited by off-target side effects and poor drug uptake into the cells that need to be treated. One way to circumvent these issues is to target the delivery and release of therapeutics to the desired location while limiting systemic toxicity. Using self-assembling peptide amphiphiles (PAs), this work has investigated supramolecular nanostructures for the development of targeted therapies. Specifically, the research has focused on the interrelationships between presentation of targeting moeities and the control of nanostructure morphology in the context of systemic delivery for targeting cancer and vascular injuries. The self-assembly region of the PA was systematically altered to achieve control of nanostructure widths, from 100 nm to 10 nm, by the addition of valine-glutamic acid dimers into the chemical structure, subsequently increasing the degree of nanostructure twist. For the targeting of tumors, a homing PA was synthesized to include a dimeric, cyclic peptide sequence known to target the cancer-specific, death receptor 5 (DR5) and initiate apoptosis through the oligomerization of DR5. This PA presented a multivalent display of DR5-binding peptides, resulting in improved binding affinity measured by surface plasmon resonance. The DR5-targeting PA also showed enhanced efficacy in both in vitro and in vivo tumor models relative to non-targeted controls. Alternative modifications to the PA-based antitumor therapies included the use of a cytotoxic, membrane-lytic PA coassembled with a pegylated PA, which showed enhanced biodistribution and in vivo activity after coassembly. The functionalization of the hydrophobic core was also accomplished through the encapsulation of the chemotherapy camptothecin, which was shown to be an effective treatment in vivo. Additionally, a targeted PA nanostructure was designed to bind to the site of vascular intervention by targeting collagen IV. Following balloon angioplasty

  8. A smart multifunctional drug delivery nanoplatform for targeting cancer cells

    NASA Astrophysics Data System (ADS)

    Hoop, M.; Mushtaq, F.; Hurter, C.; Chen, X.-Z.; Nelson, B. J.; Pané, S.

    2016-06-01

    Wirelessly guided magnetic nanomachines are promising vectors for targeted drug delivery, which have the potential to minimize the interaction between anticancer agents and healthy tissues. In this work, we propose a smart multifunctional drug delivery nanomachine for targeted drug delivery that incorporates a stimuli-responsive building block. The nanomachine consists of a magnetic nickel (Ni) nanotube that contains a pH-responsive chitosan hydrogel in its inner cavity. The chitosan inside the nanotube serves as a matrix that can selectively release drugs in acidic environments, such as the extracellular space of most tumors. Approximately a 2.5 times higher drug release from Ni nanotubes at pH = 6 is achieved compared to that at pH = 7.4. The outside of the Ni tube is coated with gold. A fluorescein isothiocyanate (FITC) labeled thiol-ssDNA, a biological marker, was conjugated on its surface by thiol-gold click chemistry, which enables traceability. The Ni nanotube allows the propulsion of the device by means of external magnetic fields. As the proposed nanoarchitecture integrates different functional building blocks, our drug delivery nanoplatform can be employed for carrying molecular drug conjugates and for performing targeted combinatorial therapies, which can provide an alternative and supplementary solution to current drug delivery technologies.Wirelessly guided magnetic nanomachines are promising vectors for targeted drug delivery, which have the potential to minimize the interaction between anticancer agents and healthy tissues. In this work, we propose a smart multifunctional drug delivery nanomachine for targeted drug delivery that incorporates a stimuli-responsive building block. The nanomachine consists of a magnetic nickel (Ni) nanotube that contains a pH-responsive chitosan hydrogel in its inner cavity. The chitosan inside the nanotube serves as a matrix that can selectively release drugs in acidic environments, such as the extracellular space of

  9. Enhancing transdermal drug delivery with electroporation.

    PubMed

    Wong, Tak-Wah; Ko, Shu-Fen; Hui, Sek-Wen

    2008-01-01

    The application of electroporation to enhance transdermal delivery has opened up a new possibility to introduce larger molecules such as peptide hormones and vaccines as well as minigenes and RNAi etc. through the transdermal route. Many devices have been developed to deliver the pulse electric field needed to permeate the skin. These devices include both non-puncturing surface electrodes as well as puncturing electrodes of different geometrical arrangements. The latter type uses electroporation only to increase uptake of molecules injected through the puncturing electrode or syringe. Different electroporation protocols have been developed to maximize transport, uptake and minimizing pain. Synergistic effect of chemical enhancers and physical (sonic, vibrational and thermal) treatments are used to enhance the transport. This article reviews the patents pertaining to the instrumentation as well as application protocols of transdermal delivery, uptake enhancement and interstitial fluid sampling by electroporation.

  10. The effect of carbon nanotubes on drug delivery in an electro-sensitive transdermal drug delivery system.

    PubMed

    Im, Ji S; Bai, Byong Ch; Lee, Young-Seak

    2010-02-01

    An electro-sensitive transdermal drug delivery system was prepared by the electrospinning method to control drug release. A semi-interpenetrating polymer network was prepared as the matrix with polyethylene oxide and pentaerythritol triacrylate polymers. Multi-walled carbon nanotubes were used as an additive to increase the electrical sensitivity. The release experiment was carried out under different electric voltage conditions. Carbon nanotubes were observed in the middle of the electrospun fibers by SEM and TEM. The amount of released drug was effectively increased with higher applied electric voltages. These results were attributed to the excellent electrical conductivity of the carbon additive. The suggested mechanism of drug release involves polyethylene oxide of the semi-interpenetrating polymer network being dissolved under the effects of carbon nanotubes, thereby releasing the drug. The effects of the electro-sensitive transdermal drug delivery system were enhanced by the carbon nanotubes.

  11. Nanostructured lipid carriers system: recent advances in drug delivery.

    PubMed

    Iqbal, Md Asif; Md, Shadab; Sahni, Jasjeet Kaur; Baboota, Sanjula; Dang, Shweta; Ali, Javed

    2012-12-01

    Nanostructured lipid carrier (NLC) is second generation smarter drug carrier system having solid matrix at room temperature. This carrier system is made up of physiological, biodegradable and biocompatible lipid materials and surfactants and is accepted by regulatory authorities for application in different drug delivery systems. The availability of many products in the market in short span of time reveals the success story of this delivery system. Since the introduction of the first product, around 30 NLC preparations are commercially available. NLC exhibit superior advantages over other colloidal carriers viz., nanoemulsions, polymeric nanoparticles, liposomes, SLN etc. and thus, have been explored to more extent in pharmaceutical technology. The whole set of unique advantages such as enhanced drug loading capacity, prevention of drug expulsion, leads to more flexibility for modulation of drug release and makes NLC versatile delivery system for various routes of administration. The present review gives insights on the definitions and characterization of NLC as colloidal carriers including the production techniques and suitable formulations. This review paper also highlights the importance of NLC in pharmaceutical applications for the various routes of drug delivery viz., topical, oral, pulmonary, ocular and parenteral administration and its future perspective as a pharmaceutical carrier.

  12. New Preparative Approaches for Micro and Nano Drug Delivery Carriers.

    PubMed

    Bochicchio, Sabrina; Dalmoro, Annalisa; Barba, Anna Angela; d'Amore, Matteo; Lamberti, Gaetano

    2017-01-01

    The full success of pharmacological therapies is strongly depending on the use of suitable, efficient and smart drug delivery systems (DDSs). Thus DDSs development is one of the main challenges in pharmaceutical industry both to achieve tailored carrier systems based on drug features and to promote manufacturing innovations to reduce energetic resources, emissions, wastes and risks. Main functions of an ideal DDS are: to protect loaded active molecules from degradation in physiological environments; to deliver them in a controlled manner and towards specific organs or tissues, to allow the maintenance of drug concentration within therapeutic window. Smart features, such as those able to induce active molecule release upon the occurrence of specific physiological stimuli, are also desirable. Under the manufacturing point of view, the current industrial scenery is obliged to respond to the increasing market requirements and to the mandatory rules in sustainable productions such as raw material and energy savings. In this work a general framework on drug delivery systems preparation techniques is presented. In particular two sections on innovation in preparative approaches carried out are detailed. These latter involve the use of microwave and ultrasonic energy applied in the production of polymeric and lipidic delivery systems on micro- and nanometric scale. The novelties of these preparative approaches are emphasized and examples of developed drug delivery carriers, loaded with vitamins and drug mimicking siRNA, are shown.

  13. Protein Nanoparticles as Drug Delivery Carriers for Cancer Therapy

    PubMed Central

    Lohcharoenkal, Warangkana; Wang, Liying; Chen, Yi Charlie

    2014-01-01

    Nanoparticles have increasingly been used for a variety of applications, most notably for the delivery of therapeutic and diagnostic agents. A large number of nanoparticle drug delivery systems have been developed for cancer treatment and various materials have been explored as drug delivery agents to improve the therapeutic efficacy and safety of anticancer drugs. Natural biomolecules such as proteins are an attractive alternative to synthetic polymers which are commonly used in drug formulations because of their safety. In general, protein nanoparticles offer a number of advantages including biocompatibility and biodegradability. They can be prepared under mild conditions without the use of toxic chemicals or organic solvents. Moreover, due to their defined primary structure, protein-based nanoparticles offer various possibilities for surface modifications including covalent attachment of drugs and targeting ligands. In this paper, we review the most significant advancements in protein nanoparticle technology and their use in drug delivery arena. We then examine the various sources of protein materials that have been used successfully for the construction of protein nanoparticles as well as their methods of preparation. Finally, we discuss the applications of protein nanoparticles in cancer therapy. PMID:24772414

  14. Pulmonary drug delivery strategies: A concise, systematic review

    PubMed Central

    Patil, J. S.; Sarasija, S.

    2012-01-01

    Because of limitations associated with the conventional treatment of various chronic diseases a growing attention has been given to the development of targeted drug delivery systems. Pulmonary route of drug delivery gaining much importance in the present day research field as it enables to target the drug delivery directly to lung both for local and systemic treatment. Over the last 2 decades, the systemic absorption of a broad range of therapeutics after pulmonary application has been demonstrated in animals as well as in humans. This review was prepared with an aim to discuss the technical, physiological, and efficacy aspects of the novel pulmonary route of drug targeting. The review also focuses on the mechanisms of pulmonary drug administration along with compatibility of the excipients employed, devices used, and techniques of particulate dosage production. This review was prepared based on the method of extensive literature survey on the topics covering all the aspects discussed in the present subject. Hence, the better understanding of complexes and challenges facing the development of pulmonary drug delivery system offer an opportunity to the pharmaceutical scientist in minimizing the clinical and technical gaps. PMID:22345913

  15. Retinal Drug Delivery System, Phase I

    DTIC Science & Technology

    1997-06-01

    macular degeneration (AMD) and diabetic retinopathy. Intraocular injection can place the drug directly into the vitreous cavity but is not recommended...drugs for treatment of other ocular diseases such as retinal tumors, diabetic retinopathy, age related macular degeneration and cytomegalovirus...with the changes in mobile phase as indicated in each section. Data was collected for 10 min and the peak area was analyzed using the standard

  16. Electrospun materials for affinity-based engineering and drug delivery

    NASA Astrophysics Data System (ADS)

    Sill, T. J.; von Recum, H. A.

    2015-10-01

    Electrospinning is a process which can quickly and cheaply create materials of high surface to volume and aspect ratios from many materials, however in application toward drug delivery this can be a strong disadvantage as well. Diffusion of drug is proportional to the thickness of that device. In moving from macro to micro to nano-sized electrospun materials drug release rates change to profiles that are too fast to be therapeutically beneficial. In this work we use molecular interactions to further control the rate of release beyond that capable of diffusion alone. To do this we create materials with molecular pockets, which can "hold" therapeutic drugs through a reversible interaction such as a host/guest complexation. Through these complexes we show we are able to impact delivery of drug from electrospun materials, and also apply them in tissue engineering for the reversible presentation of biomolecules on a fiber surface.

  17. Supramolecular "Trojan Horse" for Nuclear Delivery of Dual Anticancer Drugs.

    PubMed

    Cai, Yanbin; Shen, Haosheng; Zhan, Jie; Lin, Mingliang; Dai, Liuhan; Ren, Chunhua; Shi, Yang; Liu, Jianfeng; Gao, Jie; Yang, Zhimou

    2017-03-01

    Nuclear delivery and accumulation are very important for many anticancer drugs that interact with DNA or its associated enzymes in the nucleus. However, it is very difficult for neutrally and negatively charged anticancer drugs such as 10-hydroxycamptothecine (HCPT). Here we report a simple strategy to construct supramolecular nanomedicines for nuclear delivery of dual synergistic anticancer drugs. Our strategy utilizes the coassembly of a negatively charged HCPT-peptide amphiphile and the positively charged cisplatin. The resulting nanomaterials behave as the "Trojan Horse" that transported soldiers (anticancer drugs) across the walls of the castle (cell and nucleus membranes). Therefore, they show improved inhibition capacity to cancer cells including the drug resistant cancer cell and promote the synergistic tumor suppression property in vivo. We envision that our strategy of constructing nanomaterials by metal chelation would offer new opportunities to develop nanomedicines for combination chemotherapy.

  18. Multifunctional, stimuli-sensitive nanoparticulate systems for drug delivery

    PubMed Central

    Torchilin, Vladimir P.

    2015-01-01

    The use of nanoparticulate pharmaceutical drug delivery systems (NDDSs) to enhance the in vivo effectiveness of drugs is now well established. The development of multifunctional and stimulus-sensitive NDDSs is an active area of current research. Such NDDSs can have long circulation times, target the site of the disease and enhance the intracellular delivery of a drug. This type of NDDS can also respond to local stimuli that are characteristic of the pathological site by, for example, releasing an entrapped drug or shedding a protective coating, thus facilitating the interaction between drug-loaded nanocarriers and target cells or tissues. In addition, imaging contrast moieties can be attached to these carriers to track their real-time biodistribution and accumulation in target cells or tissues. Here, I highlight recent developments with multifunctional and stimuli-sensitive NDDSs and their therapeutic potential for diseases including cancer, cardiovascular diseases and infectious diseases. PMID:25287120

  19. NanoClusters Enhance Drug Delivery in Mechanical Ventilation

    NASA Astrophysics Data System (ADS)

    Pornputtapitak, Warangkana

    The overall goal of this thesis was to develop a dry powder delivery system for patients on mechanical ventilation. The studies were divided into two parts: the formulation development and the device design. The pulmonary system is an attractive route for drug delivery since the lungs have a large accessible surface area for treatment or drug absorption. For ventilated patients, inhaled drugs have to successfully navigate ventilator tubing and an endotracheal tube. Agglomerates of drug nanoparticles (also known as 'NanoClusters') are fine dry powder aerosols that were hypothesized to enable drug delivery through ventilator circuits. This Thesis systematically investigated formulations of NanoClusters and their aerosol performance in a conventional inhaler and a device designed for use during mechanical ventilation. These engineered powders of budesonide (NC-Bud) were delivered via a MonodoseRTM inhaler or a novel device through commercial endotracheal tubes, and analyzed by cascade impaction. NC-Bud had a higher efficiency of aerosol delivery compared to micronized stock budesonide. The delivery efficiency was independent of ventilator parameters such as inspiration patterns, inspiration volumes, and inspiration flow rates. A novel device designed to fit directly to the ventilator and endotracheal tubing connections and the MonodoseRTM inhaler showed the same efficiency of drug delivery. The new device combined with NanoCluster formulation technology, therefore, allowed convenient and efficient drug delivery through endotracheal tubes. Furthermore, itraconazole (ITZ), a triazole antifungal agent, was formulated as a NanoCluster powder via milling (top-down process) or precipitation (bottom-up process) without using any excipients. ITZ NanoClusters prepared by wet milling showed better aerosol performance compared to micronized stock ITZ and ITZ NanoClusters prepared by precipitation. ITZ NanoClusters prepared by precipitation methods also showed an amorphous state

  20. Designer lipids for drug delivery: from heads to tails

    PubMed Central

    Kohli, Aditya G.; Kierstead, Paul H.; Venditto, Vincent J.; Walsh, Colin L.; Szoka, Francis C.

    2014-01-01

    For four decades, liposomes composed of both naturally occurring and synthetic lipids have been investigated as delivery vehicles for low molecular weight and macromolecular drugs. These studies paved the way for the clinical and commercial success of a number of liposomal drugs, each of which required a tailored formulation; one liposome size does not fit all drugs! Instead, the physicochemical properties of the liposome must be matched to the pharmacology of the drug. An extensive biophysical literature demonstrates that varying lipid composition can influence the size, membrane stability, in vivo interactions, and drug release properties of a liposome. In this review we focus on recently described synthetic lipid headgroups, linkers and hydrophobic domains that can provide control over the intermolecular forces, phase preference, and macroscopic behavior of liposomes. These synthetic lipids further our understanding of lipid biophysics, promote targeted drug delivery, and improve liposome stability. We further highlight the immune reactivity of novel synthetic headgroups as a key design consideration. For instance it was originally thought that synthetic PEGylated lipids were immunologically inert; however, it’s been observed that under certain conditions PEGylated lipids induce humoral immunity. Such immune activation may be a limitation to the use of other engineered lipid headgroups for drug delivery. In addition to the potential immunogenicity of engineered lipids, future investigations on liposome drugs in vivo should pay particular attention to the location and dynamics of payload release. PMID:24816069

  1. Enema ion compositions for enhancing colorectal drug delivery.

    PubMed

    Maisel, Katharina; Chattopadhyay, Sumon; Moench, Thomas; Hendrix, Craig; Cone, Richard; Ensign, Laura M; Hanes, Justin

    2015-07-10

    Delivering drugs to the colorectum by enema has advantages for treating or preventing both local and systemic diseases. However, the properties of the enema itself are not typically exploited for improving drug delivery. Sodium ions are actively pumped out of the lumen of the colon, which is followed by osmotically-driven water absorption, so we hypothesized that this natural mechanism could be exploited to drive nanoparticles and drugs to the colorectal tissue surface. Here, we report that sodium-based, absorption-inducing (hypotonic) enemas rapidly transport hydrophilic drugs and non-mucoadhesive, mucus penetrating nanoparticles (MPP), deep into the colorectal folds to reach virtually the entire colorectal epithelial surface. In contrast, isotonic and secretion-inducing (hypertonic) vehicles led to non-uniform, poor surface coverage. Sodium-based enemas induced rapid fluid absorption even when moderately hyper-osmolal (~350 mOsm) compared to blood (~300 mOsm), which suggests that active sodium absorption plays a key role in osmosis-driven fluid uptake. We then used tenofovir, an antiretroviral drug in clinical trials for preventing HIV, to test the effects of enema composition on local and systemic drug delivery. We found that strongly hypotonic and hypertonic enemas caused rapid systemic drug uptake, whereas moderately hypotonic enemas with ion compositions similar to feces resulted in high local tissue levels with minimal systemic drug exposure. Similarly, moderately hypotonic enemas provided improved local drug retention in colorectal tissue, whereas hypertonic and isotonic enemas provided markedly reduced drug retention in colorectal tissue. Lastly, we found that moderately hypotonic enema formulations caused little to no detectable epithelial damage, while hypertonic solutions caused significant damage, including epithelial sloughing; the epithelial damage caused increased systemic drug absorption and penetration of MPP into colorectal tissue, a potential

  2. Microbubbles in Ultrasound-Triggered Drug and Gene Delivery

    PubMed Central

    Hernot, Sophie; Klibanov, Alexander L.

    2008-01-01

    Ultrasound contrast agents, in the form of gas-filled microbubbles, are becoming popular in perfusion monitoring; they are employed as molecular imaging agents. Microbubbles are manufactured from biocompatible materials, they can be injected intravenously, and some are approved for clinical use. Microbubbles can be destroyed by ultrasound irradiation. This destruction phenomenon can be applied to targeted drug delivery and enhancement of drug action. The ultrasonic field can be focused at the target tissues and organs; thus, selectivity of the treatment can be improved, reducing undesirable side effects. Microbubbles enhance ultrasound energy deposition in the tissues and serve as cavitation nuclei, increasing intracellular drug delivery. DNA delivery and successful tissue transfection is observed in the areas of the body where ultrasound is applied after intravascular administration of microbubbles and plasmid DNA. Accelerated blood clot dissolution in the areas of insonation by cooperative action of thrombolytic agents and microbubbles is demonstrated in several clinical trials. PMID:18486268

  3. Medicated chewing gum, a novel drug delivery system

    PubMed Central

    Aslani, Abolfazl; Rostami, Farnaz

    2015-01-01

    New formulations and technologies have been developed through oral drug delivery systems’ researches. Such researches display significance of oral route amongst patients. We’ve reviewed all the features associated with medicated chewing gum as a modern drug delivery by introducing the history, advantages and disadvantages, methods of manufacturing, composition differences, evaluation tests and examples of varieties of medicated chewing gums. Acceptance of medicated chewing gum has been augmented through years. The advantages and therapeutic benefits of chewing gum support its development as we can see new formulations with new drugs contained have been produced from past and are going to find a place in market by formulation of new medicated chewing gums. Potential applications of medicated chewing gums are highly widespread as they will be recognized in future. Nowadays standards for qualifying chewing gums are the same as tablets. Patient-centered studies include medicated chewing gums as a delivery system too which creates compliance for patients. PMID:26109999

  4. A clinical perspective on mucoadhesive buccal drug delivery systems

    PubMed Central

    Gilhotra, Ritu M; Ikram, Mohd; Srivastava, Sunny; Gilhotra, Neeraj

    2014-01-01

    Mucoadhesion can be defined as a state in which two components, of which one is of biological origin, are held together for extended periods of time by the help of interfacial forces. Among the various transmucosal routes, buccal mucosa has excellent accessibility and relatively immobile mucosa, hence suitable for administration of retentive dosage form. The objective of this paper is to review the works done so far in the field of mucoadhesive buccal drug delivery systems (MBDDS), with a clinical perspective. Starting with a brief introduction of the mucoadhesive drug delivery systems, oral mucosa, and the theories of mucoadhesion, this article then proceeds to cover the works done so far in the field of MBDDS, categorizing them on the basis of ailments they are meant to cure. Additionally, we focus on the various patents, recent advancements, and challenges as well as the future prospects for mucoadhesive buccal drug delivery systems. PMID:24683406

  5. Enzyme-activated intracellular drug delivery with tubule clay nanoformulation

    NASA Astrophysics Data System (ADS)

    Dzamukova, Maria R.; Naumenko, Ekaterina A.; Lvov, Yuri M.; Fakhrullin, Rawil F.

    2015-05-01

    Fabrication of stimuli-triggered drug delivery vehicle s is an important milestone in treating cancer. Here we demonstrate the selective anticancer drug delivery into human cells with biocompatible 50-nm diameter halloysite nanotube carriers. Physically-adsorbed dextrin end stoppers secure the intercellular release of brilliant green. Drug-loaded nanotubes penetrate through the cellular membranes and their uptake efficiency depends on the cells growth rate. Intercellular glycosyl hydrolases-mediated decomposition of the dextrin tube-end stoppers triggers the release of the lumen-loaded brilliant green, which allowed for preferable elimination of human lung carcinoma cells (A549) as compared with hepatoma cells (Hep3b). The enzyme-activated intracellular delivery of brilliant green using dextrin-coated halloysite nanotubes is a promising platform for anticancer treatment.

  6. Drug delivery implants in the treatment of vitreous inflammation.

    PubMed

    Wang, Jillian; Jiang, Angela; Joshi, Malav; Christoforidis, John

    2013-01-01

    The eye is a model organ for the local delivery of therapeutics. This proves beneficial when treating vitreous inflammation and other ophthalmic pathologies. The chronicity of certain diseases, however, limits the effectiveness of locally administered drugs. To maintain such treatments often requires frequent office visits and can result in increased risk of infection and toxicity to the patient. This paper focuses on the implantable devices and particulate drug delivery systems that are currently being implemented and investigated to overcome these challenges. Implants currently on the market or undergoing clinical trials include those made of nonbiodegradable polymers, containing ganciclovir, fluocinolone acetonide, triamcinolone acetonide, and ranibizumab, and biodegradable polymers, containing dexamethasone, triamcinolone acetonide, and ranibizumab. Investigational intravitreal implants and particulate drug delivery systems, such as nanoparticles, microparticles, and liposomes, are also explored in this review article.

  7. Drug Delivery Implants in the Treatment of Vitreous Inflammation

    PubMed Central

    Wang, Jillian; Jiang, Angela; Joshi, Malav; Christoforidis, John

    2013-01-01

    The eye is a model organ for the local delivery of therapeutics. This proves beneficial when treating vitreous inflammation and other ophthalmic pathologies. The chronicity of certain diseases, however, limits the effectiveness of locally administered drugs. To maintain such treatments often requires frequent office visits and can result in increased risk of infection and toxicity to the patient. This paper focuses on the implantable devices and particulate drug delivery systems that are currently being implemented and investigated to overcome these challenges. Implants currently on the market or undergoing clinical trials include those made of nonbiodegradable polymers, containing ganciclovir, fluocinolone acetonide, triamcinolone acetonide, and ranibizumab, and biodegradable polymers, containing dexamethasone, triamcinolone acetonide, and ranibizumab. Investigational intravitreal implants and particulate drug delivery systems, such as nanoparticles, microparticles, and liposomes, are also explored in this review article. PMID:24191132

  8. Applications of polymers in intraocular drug delivery systems

    PubMed Central

    Alhalafi, Ali Mohammed

    2017-01-01

    We are entering a new era of ophthalmic pharmacology where new drugs are rapidly being developed for the treatment of anterior and posterior segment of the eye disease. The pharmacokinetics of drug delivery to the eye remains a very active area of ophthalmic research. Intraocular drug delivery systems allow the release of the drug, bypassing the blood-ocular barrier. The main advantage of these preparations is that they can release the drug over a long time with one single administration. These pharmaceutical systems are of great important in the treatment of the posterior segment diseases, and they can be prepared from biodegradable or nonbiodegradable polymers. Biodegradable polymers have the advantage of disappearing from the site of action after releasing the drug. The majority of intraocular devices are prepared from nonbiodegradable polymers, and they can release controlled amounts of drugs for months. Nonbiodegradable polymers include silicone, polyvinyl alcohol, and ethylene-vinyl acetate. The polymers usually employed to prepare nanoparticles for the topical ophthalmic route are poly (acrylic acid) derivatives (polyalquilcyanocrylates), albumin, poly-ε-caprolactone, and chitosan. Dendrimers are a recent class of polymeric materials with unique nanostructure which has been studied to discover their role in the delivery of therapeutics and imaging agents. Hydrogels are polymers that can swell in aqueous solvent system, and they hold the solvents in a swollen cross-linked gel for delivery. This review exhibits the current literature regarding applications of polymers in ophthalmic drug delivery systems including pharmacokinetics, advantages, disadvantages, and indications aimed to obtain successful eye therapy. Method of Literature Search: A systematic literature review was performed using PubMed databases into two steps. The first step was oriented to classification of intraocular polymers implants focusing on their advantages and disadvantages. The second

  9. Pressure Waves in Medicine: From Tissue Injury to Drug Delivery

    NASA Astrophysics Data System (ADS)

    Doukas, Apostolos G.

    2004-07-01

    Pressure waves have the potential to cause injury to cells and tissue or enable novel therapeutic modalities, such as fragmentation of kidney stones and drug delivery. Research on the biological effects of pressure waves have shown that the biological response on depends the pressure-wave characteristics. One of the most prominent effects induced by pressure waves is the permeabilization of a number of barrier structures (cell plasma membrane, skin and microbial biofilms) and facilitate the delivery of macromolecules. The permeabilization of the barrier structure is transient and the barrier function recovers. Thus, pressure waves can induce delivery of molecular species that would not normally cross the barrier structure.

  10. Multiscale Kinetic Modeling of Liposomal Doxorubicin Delivery Quantifies the Role of Tumor and Drug-Specific Parameters in Local Delivery to Tumors

    PubMed Central

    Hendriks, B S; Reynolds, J G; Klinz, S G; Geretti, E; Lee, H; Leonard, S C; Gaddy, D F; Espelin, C W; Nielsen, U B; Wickham, T J

    2012-01-01

    Nanoparticle encapsulation has been used as a means to manipulate the pharmacokinetic (PK) and safety profile of drugs in oncology. Using pegylated liposomal doxorubicin (PLD) vs. conventional doxorubicin as a model system, we developed and experimentally validated a multiscale computational model of liposomal drug delivery. We demonstrated that, for varying tumor transport properties, there is a regimen where liposomal and conventional doxorubicin deliver identical amounts of doxorubicin to tumor cell nuclei. In mice, typical tumor properties consistently favor improved delivery via liposomes relative to free drug. However, in humans, we predict that some tumors will have properties wherein liposomal delivery delivers the identical amount of drug to its target relative to dosing with free drug. The ability to identify tumor types and/or individual patient tumors with high degree of liposome deposition may be critical for optimizing the success of nanoparticle and liposomal anticancer therapeutics. PMID:23835797

  11. Nanoscale drug delivery systems and the blood–brain barrier

    PubMed Central

    Alyautdin, Renad; Khalin, Igor; Nafeeza, Mohd Ismail; Haron, Muhammad Huzaimi; Kuznetsov, Dmitry

    2014-01-01

    The protective properties of the blood–brain barrier (BBB) are conferred by the intricate architecture of its endothelium coupled with multiple specific transport systems expressed on the surface of endothelial cells (ECs) in the brain’s vasculature. When the stringent control of the BBB is disrupted, such as following EC damage, substances that are safe for peripheral tissues but toxic to neurons have easier access to the central nervous system (CNS). As a consequence, CNS disorders, including degenerative diseases, can occur independently of an individual’s age. Although the BBB is crucial in regulating the biochemical environment that is essential for maintaining neuronal integrity, it limits drug delivery to the CNS. This makes it difficult to deliver beneficial drugs across the BBB while preventing the passage of potential neurotoxins. Available options include transport of drugs across the ECs through traversing occludins and claudins in the tight junctions or by attaching drugs to one of the existing transport systems. Either way, access must specifically allow only the passage of a particular drug. In general, the BBB allows small molecules to enter the CNS; however, most drugs with the potential to treat neurological disorders other than infections have large structures. Several mechanisms, such as modifications of the built-in pumping-out system of drugs and utilization of nanocarriers and liposomes, are among the drug-delivery systems that have been tested; however, each has its limitations and constraints. This review comprehensively discusses the functional morphology of the BBB and the challenges that must be overcome by drug-delivery systems and elaborates on the potential targets, mechanisms, and formulations to improve drug delivery to the CNS. PMID:24550672

  12. Which drug or drug delivery system can change clinical practice for brain tumor therapy?

    PubMed Central

    Siegal, Tali

    2013-01-01

    The prognosis and treatment outcome for primary brain tumors have remained unchanged despite advances in anticancer drug discovery and development. In clinical trials, the majority of promising experimental agents for brain tumors have had limited impact on survival or time to recurrence. These disappointing results are partially explained by the inadequacy of effective drug delivery to the CNS. The impediments posed by the various specialized physiological barriers and active efflux mechanisms lead to drug failure because of inability to reach the desired target at a sufficient concentration. This perspective reviews the leading strategies that aim to improve drug delivery to brain tumors and their likelihood to change clinical practice. The English literature was searched for defined search items. Strategies that use systemic delivery and those that use local delivery are critically reviewed. In addition, challenges posed for drug delivery by combined treatment with anti-angiogenic therapy are outlined. To impact clinical practice and to achieve more than just a limited local control, new drugs and delivery systems must adhere to basic clinical expectations. These include, in addition to an antitumor effect, a verified favorable adverse effects profile, easy introduction into clinical practice, feasibility of repeated or continuous administration, and compatibility of the drug or delivery system with any tumor size and brain location. PMID:23502426

  13. Drug Delivery for Peripheral Nerve Regeneration

    DTIC Science & Technology

    2014-09-01

    require special bridging strategies for tension-free repair. Autologous nerve grafts serve as the state-of-the-art in repairing such gaps but numerous...the regenerating nerves and can allow for tension free bridging without the need to harvest donor nerve. A number of research groups have proposed...Optimize nanoporous membrane dimensions ......................(Gale)(months 2-3) c. Optimize reservoir dimensions

  14. Nanostructured lipid carriers (NLCs) for drug delivery and targeting.

    PubMed

    Fang, Chia-Lang; Al-Suwayeh, Saleh A; Fang, Jia-You

    2013-01-01

    Nanostructured lipid carriers (NLCs) are drug-delivery systems composed of both solid and liquid lipids as a core matrix. It was shown that NLCs reveal some advantages for drug therapy over conventional carriers, including increased solubility, the ability to enhance storage stability, improved permeability and bioavailability, reduced adverse effect, prolonged half-life, and tissue-targeted delivery. NLCs have attracted increasing attention in recent years. This review describes recent developments in drug delivery using NLCs strategies. The structures, preparation techniques, and physicochemical characterization of NLCs are systematically elucidated in this review. The potential of NLCs to be used for different administration routes is highlighted. Special attention is paid to parenteral injection and topical delivery since these are the most common routes for investigating NLCs. Relevant issues for the introduction of NLCs to market, including pharmaceutical and cosmetic applications, are discussed. The related patents of NLCs for drug delivery are also reviewed. Finally, the future development and current obstacles needing to be resolved are elucidated.

  15. The effects of polymeric nanostructure shape on drug delivery.

    PubMed

    Venkataraman, Shrinivas; Hedrick, James L; Ong, Zhan Yuin; Yang, Chuan; Ee, Pui Lai Rachel; Hammond, Paula T; Yang, Yi Yan

    2011-11-01

    Amphiphilic polymeric nanostructures have long been well-recognized as an excellent candidate for drug delivery applications. With the recent advances in the "top-down" and "bottom-up" approaches, development of well-defined polymeric nanostructures of different shapes has been possible. Such a possibility of tailoring the shape of the nanostructures has allowed for the fabrication of model systems with chemically equivalent but topologically different carriers. With these model nanostructures, evaluation of the importance of particle shape in the context of biodistribution, cellular uptake and toxicity has become a major thrust area. Since most of the current polymeric delivery systems are based upon spherical nanostructures, understanding the implications of other shapes will allow for the development of next generation drug delivery vehicles. Herein we will review different approaches to fabricate polymeric nanostructures of various shapes, provide a comprehensive summary on the current understandings of the influence of nanostructures with different shapes on important biological processes in drug delivery, and discuss future perspectives for the development of nanostructures with well-defined shapes for drug delivery.

  16. Self-double-emulsifying drug delivery system (SDEDDS): a new way for oral delivery of drugs with high solubility and low permeability.

    PubMed

    Qi, Xiaole; Wang, Lishuang; Zhu, Jiabi; Hu, Zhenyi; Zhang, Jie

    2011-05-16

    Water-in-oil-in-water (w/o/w) double emulsions are potential for enhancing oral bioavailability of drugs with high solubility and low permeability, but their industrial application is limited due to the instability. Herein, we developed a novel formulation, self-double-emulsifying drug delivery systems (SDEDDS) by formulating mixtures of hydrophilic surfactants and water-in-oil (w/o) emulsions, which were easier to be stable through formulations optimization. SDEDDS can spontaneously emulsify to water-in-oil-in-water (w/o/w) double emulsions in the mixed aqueous gastrointestinal environment, with drugs encapsulated in the internal water phase of the double emulsions. We employed SDEDDS to improve the oral absorption of pidotimod, a peptide-like drug with high solubility and low permeability. The optimized pidotimod-SDEDDS were found to be stable up to 6 months under 25°C. Plasma concentration-time profiles from pharmacokinetic studies in rats dosed with SDEDDS showed 2.56-fold (p<0.05) increased absorption of pidotimod, compared to the pidotimod solution. Histopathologic studies confirmed that SDEDDS exerted absorption promoting effect without serious local damages. These studies demonstrate that SDEDDS may be a promising strategy for peroral delivery of peptide and peptidomimetic drugs.

  17. Formulation and optimization of nano-sized ethosomes for enhanced transdermal delivery of cromolyn sodium

    PubMed Central

    Rakesh, R.; Anoop, K. R.

    2012-01-01

    Aim: The current study was aimed to investigate the feasibility of transdermal delivery of cromolyn sodium using a novel lipid vesicular carrier, ethosomes. Materials And Methods: Ethosomes of cromolyn sodium was prepared, optimized, and characterized for vesicle shape, vesicle size and size distribution, zeta potential, entrapment efficiency, in vitro drug release, in vitro skin permeation, in vitro skin deposition and vesicle stability. Histological examination of porcine ear skin treated with optimized ethosomal formulation was performed to study the change of skin morphologies. Results: The optimized cromolyn sodium ethosomes showed reasonable entrapment efficiency (49.88±1.84%), optimum nanometric size range (133.8 ± 7.5 nm), and high zeta potential (-69.82 ± 1.2 mV). In vitro drug release studies of optimized ethosomal formulation through cellophane membrane showed an enhanced and sustained delivery of drug compared to conventional liposomes, hydroethanolic, (45% v/v) and phosphate buffer saline PBS pH 7.4 drug solutions. The optimized ethosomal formulation showed significantly-enhanced transdermal flux (18.49 ± 0.08 mg/cm2/h) across porcine ear skin as compared to liposome (1.80 ± 0.12 mg/cm2/h), hydroethanolic drug solution (4.45 ± 0.71 mg/cm2/h), and PBS pH 7.4 drug solution (1.18 ± 0.35 mg/cm2/h). Moreover, ethosomal formulation showed better skin drug deposition (10.28 ± 0.67%) and shortest lag time (0.11 ± 0.09 h) for cromolyn sodium. Conclusion: Our significant results suggest that ethosomes can be a promising tool for transdermal delivery of cromolyn sodium. PMID:23248569

  18. [Strategy and collaboration between medicinal chemists and pharmaceutical scientists for drug delivery systems].

    PubMed

    Mano, Takashi

    2013-01-01

    In order to successfully apply drug delivery systems (DDS) to new chemical entities (NCEs), collaboration between medicinal chemists and formulation scientists is critical for efficient drug discovery. Formulation scientists have to use 'language' that medicinal chemists understand to help promote mutual understanding, and medicinal chemists and formulation scientists have to set up strategies to use suitable DDS technologies at the discovery phase of the programmes to ensure successful transfer into the development phase. In this review, strategies of solubilisation formulation for oral delivery, inhalation delivery, nasal delivery and bioconjugation are all discussed. For example, for oral drug delivery, multiple initiatives can be proposed to improve the process to select an optimal delivery option for an NCE. From a technical perspective, formulation scientists have to explain the scope and limitations of formulations as some DDS technologies might be applicable only to limited chemical spaces. Other limitations could be the administered dose and, cost, time and resources for formulation development and manufacturing. Since DDS selection is best placed as part of lead-optimisation, formulation scientists need to be involved in discovery projects at lead selection and optimisation stages. The key to success in their collaboration is to facilitate communication between these two areas of expertise at both a strategic and scientific level. Also, it would be beneficial for medicinal chemists and formulation scientists to set common goals to improve the process of collaboration and build long term partnerships to improve DDS.

  19. Programmable nanomedicine: synergistic and sequential drug delivery systems

    NASA Astrophysics Data System (ADS)

    Pacardo, Dennis B.; Ligler, Frances S.; Gu, Zhen

    2015-02-01

    Recent developments in nanomedicine for the cancer therapy have enabled programmable delivery of therapeutics by exploiting the stimuli-responsive properties of nanocarriers. These therapeutic systems were designed with the relevant chemical and physical properties that respond to different triggers for enhanced anticancer efficacy, including the reduced development of drug-resistance, lower therapeutic dose, site-specific transport, and spatiotemporally controlled release. This minireview discusses the current advances in programmable nanocarriers for cancer therapy with particular emphasis on synergistic and sequential drug delivery systems.

  20. Drug delivery via porous silicon: a focused patent review.

    PubMed

    Kulyavtsev, Paulina A; Spencer, Roxanne P

    2017-03-01

    Although silicon is more commonly associated with computer chips than with drug delivery, with the discovery that porous silicon is a viable biocompatible material, mesoporous silicon with pores between 2 and 50 nm has been loaded with small molecule and biomolecule therapeutics and safely implanted for controlled release. As porous silicon is readily oxidized, porous silica must also be considered for drug delivery applications. Since 2010, only a limited number of US patents have been granted, primarily for ophthalmologic and immunotherapy applications, in contrast to the growing body of technical literature in this area.

  1. Carbon Nanotubes Hybrid Hydrogels in Drug Delivery: A Perspective Review

    PubMed Central

    Hampel, Silke; Spizzirri, Umile Gianfranco; Parisi, Ortensia Ilaria; Picci, Nevio; Iemma, Francesca

    2014-01-01

    The use of biologics, polymers, silicon materials, carbon materials, and metals has been proposed for the preparation of innovative drug delivery devices. One of the most promising materials in this field are the carbon-nanotubes composites and hybrid materials coupling the advantages of polymers (biocompatibility and biodegradability) with those of carbon nanotubes (cellular uptake, stability, electromagnatic, and magnetic behavior). The applicability of polymer-carbon nanotubes composites in drug delivery, with particular attention to the controlled release by composites hydrogel, is being extensively investigated in the present review. PMID:24587993

  2. Adamantane in Drug Delivery Systems and Surface Recognition.

    PubMed

    Štimac, Adela; Šekutor, Marina; Mlinarić-Majerski, Kata; Frkanec, Leo; Frkanec, Ruža

    2017-02-16

    The adamantane moiety is widely applied in design and synthesis of new drug delivery systems and in surface recognition studies. This review focuses on liposomes, cyclodextrins, and dendrimers based on or incorporating adamantane derivatives. Our recent concept of adamantane as an anchor in the lipid bilayer of liposomes has promising applications in the field of targeted drug delivery and surface recognition. The results reported here encourage the development of novel adamantane-based structures and self-assembled supramolecular systems for basic chemical investigations as well as for biomedical application.

  3. Ferritins as Nanoplatforms for Imaging and Drug Delivery

    PubMed Central

    Zhen, Zipeng; Tang, Wei; Todd, Trever; Xie, Jin

    2015-01-01

    Introduction Due to unique architecture and surface properties, ferritin has emerged as an important class of biomaterial. Many studies suggest that ferritin and its derivatives hold great potential in a wide range of bio-applications. Areas covered In this review, we summarize recent progress on employing ferritins as a platform to construct functional nanoparticles for applications in magnetic resonance imaging (MRI), optical imaging, cell tracking, and drug delivery. Expert opinion As a natural polymer, ferritins afford advantages such as high biocompatibility, good biodegradability, and a relatively long plasma half-life. These attributes put ferritins ahead of conventional materials in clinical translation for imaging and drug delivery purposes. PMID:25070839

  4. Carbon nanotubes hybrid hydrogels in drug delivery: a perspective review.

    PubMed

    Cirillo, Giuseppe; Hampel, Silke; Spizzirri, Umile Gianfranco; Parisi, Ortensia Ilaria; Picci, Nevio; Iemma, Francesca

    2014-01-01

    The use of biologics, polymers, silicon materials, carbon materials, and metals has been proposed for the preparation of innovative drug delivery devices. One of the most promising materials in this field are the carbon-nanotubes composites and hybrid materials coupling the advantages of polymers (biocompatibility and biodegradability) with those of carbon nanotubes (cellular uptake, stability, electromagnatic, and magnetic behavior). The applicability of polymer-carbon nanotubes composites in drug delivery, with particular attention to the controlled release by composites hydrogel, is being extensively investigated in the present review.

  5. Nanostructured cubosomes as a platform for oral drug delivery.

    PubMed

    Liu, Min; Chen, Meiwan; Xu, Ping; Yang, Zhiwen

    2015-01-01

    Cubosomes are formed by amphiphilic molecules, with the bicontinuous contortions of inter-connecting hydrophilic and hydrophobic domains. The inner cubic-phase structure of cubosomes makes it an attractive drug-delivery system in pharmaceutical applications. This review mainly describes the potential applications of cubosomes as a drug delivery system for oral administration, highlights the mechanisms involved in the transcellular transport and digestive process, challenges involved in formulation development and evaluations of the in vivo and in vitro study. As pointed out throughout this review, a number of critical points on cubosome products need to be solved in order to attain practical applications.

  6. High-Resolution Imaging of Dendrimers Used in Drug Delivery via Scanning Probe Microscopy.

    PubMed

    Shi, Lifang; Fleming, Christopher J; Riechers, Shawn L; Yin, Nai-Ning; Luo, Juntao; Lam, Kit S; Liu, Gang-Yu

    2011-01-01

    Dendrimers and telodendrimer micelles represent two new classes of vehicles for drug delivery that have attracted much attention recently. Their structural characterization at the molecular and submolecular level remains a challenge due to the difficulties in reaching high resolution when imaging small particles in their native media. This investigation offers a new approach towards this challenge, using scanning tunneling microscopy (STM) and atomic force microscopy (AFM). By using new sample preparation protocols, this work demonstrates that (a) intramolecular features such as drug molecules and dendrimer termini can be resolved; and (b) telodendrimer micelles can be immobilized on the surface without compromising structural integrity, and as such, high resolution AFM imaging may be performed to attain 3D information. This high-resolution structural information should enhance our knowledge of the nanocarrier structure and nanocarrier-drug interaction and, therefore, facilitate design and optimization of the efficiency in drug delivery.

  7. Delivery of aerosolized drugs encapsulated in liposomes

    SciTech Connect

    Cheng, Yung-Sung; Lyons, C.R.; Schmid, M.H.

    1995-12-01

    Mycobacterium tuberculosis (Mtb) is an infectious disease that resides in the human lung. Due to the difficulty in completely killing off the disease in infected individuals, Mtb has developed drug-resistant forms and is on the rise in the human population. Therefore, ITRI and the University of New Mexico are collaborating to explore the treatment of Mtb by an aerosolized drug delivered directly to the lungs. In conclusion, it is feasible to obtain an appropriate size and concentration of the liposomes before and after aerosolization.

  8. Drug delivery with topically applied nanoparticles: science fiction or reality.

    PubMed

    Lademann, J; Richter, H; Meinke, M C; Lange-Asschenfeldt, B; Antoniou, C; Mak, W C; Renneberg, R; Sterry, W; Patzelt, A

    2013-01-01

    The efficacy of topically applied drugs is determined by their action mechanism and their potential capacity of passing the skin barrier. Nanoparticles are assumed to be efficient carrier systems for drug delivery through the skin barrier. For flexible nanoparticles like liposomes, this effect has been well demonstrated. The penetration properties of solid nanoparticles are currently under intensive investigation. The crucial advantage of nanoparticles over non-particulate substances is their capability to penetrate deeply into the hair follicles where they can be stored for several days. There is no evidence, yet, that solid particles ≥40 nm are capable of passing through the healthy skin barrier. Therefore and in spite of the long-standing research efforts in this field, commercially available solid nanoparticle-based products for drug delivery through the healthy skin are still missing. Nevertheless, the prospects for the clinical use of nanoparticles in drug delivery are tremendous. They can be designed as transport systems delivering drugs efficiently into the hair follicles in the vicinity of specific target structures. Once deposited at these structures, specific signals might trigger the release of the drugs and exert their effects on the target cells. In this article, examples of such triggered drug release are presented.

  9. Novel targeted bladder drug-delivery systems: a review

    PubMed Central

    Zacchè, Martino Maria; Srikrishna, Sushma; Cardozo, Linda

    2015-01-01

    The objective of pharmaceutics is the development of drugs with increased efficacy and reduced side effects. Prolonged exposure of the diseased tissue to the drug is of crucial importance. Drug-delivery systems (DDSs) have been introduced to control rate, time, and place of release. Drugs can easily reach the bladder through a catheter, while systemically administered agents may undergo extensive metabolism. Continuous urine filling and subsequent washout hinder intravesical drug delivery (IDD). Moreover, the low permeability of the urothelium, also described as the bladder permeability barrier, poses a major challenge in the development of the IDD. DDSs increase bioavailability of drugs, therefore improving therapeutic effect and patient compliance. This review focuses on novel DDSs to treat bladder conditions such as overactive bladder, interstitial cystitis, bladder cancer, and recurrent urinary tract infections. The rationale and strategies for both systemic and local delivery methods are discussed, with emphasis on new formulations of well-known drugs (oxybutynin), nanocarriers, polymeric hydrogels, intravesical devices, encapsulated DDSs, and gene therapy. We give an overview of current and future prospects of DDSs for bladder disorders, including nanotechnology and gene therapy. PMID:26649286

  10. Sunflower Polymers for Folate-Mediated Drug Delivery.

    PubMed

    Wang, Christine E; Wei, Hua; Tan, Nicholas; Boydston, Andrew J; Pun, Suzie H

    2016-01-11

    Polymeric delivery vehicles can improve the safety and efficacy of chemotherapy drugs by facilitating preferential tumor delivery. Polymer-drug conjugates are especially attractive carriers because additional formulation steps are not required during manufacturing, and drug release profiles can be altered based on linker choice. For clinical translation, these vehicles should also be reproducibly and controllably synthesized. Recently, we reported the development of a class of materials called "sunflower polymers," synthesized by controlled radical polymerization of hydrophilic "petals" from a cyclic multimacroinitiator "core". This synthesis strategy afforded control over the size of the polymer nanostructures based on their petal polymerization time. In this work, we demonstrate that particle size can be further tuned by varying the degree of polymerization of the cyclic core in addition to that of the petals. Additionally, we investigate the application of these materials for tumor-targeted drug delivery. We demonstrate that folate-targeted, doxorubicin-conjugated sunflower polymers undergo receptor-mediated uptake into cancer cells and pH-triggered drug release leading to cytotoxicity. These materials are attractive as drug carriers due to their discrete and small size, shielded drug cargo that can be triggered for release, and relative ease of synthesis.

  11. Novel targeted bladder drug-delivery systems: a review.

    PubMed

    Zacchè, Martino Maria; Srikrishna, Sushma; Cardozo, Linda

    2015-01-01

    The objective of pharmaceutics is the development of drugs with increased efficacy and reduced side effects. Prolonged exposure of the diseased tissue to the drug is of crucial importance. Drug-delivery systems (DDSs) have been introduced to control rate, time, and place of release. Drugs can easily reach the bladder through a catheter, while systemically administered agents may undergo extensive metabolism. Continuous urine filling and subsequent washout hinder intravesical drug delivery (IDD). Moreover, the low permeability of the urothelium, also described as the bladder permeability barrier, poses a major challenge in the development of the IDD. DDSs increase bioavailability of drugs, therefore improving therapeutic effect and patient compliance. This review focuses on novel DDSs to treat bladder conditions such as overactive bladder, interstitial cystitis, bladder cancer, and recurrent urinary tract infections. The rationale and strategies for both systemic and local delivery methods are discussed, with emphasis on new formulations of well-known drugs (oxybutynin), nanocarriers, polymeric hydrogels, intravesical devices, encapsulated DDSs, and gene therapy. We give an overview of current and future prospects of DDSs for bladder disorders, including nanotechnology and gene therapy.

  12. Ex vivo investigation of magnetically targeted drug delivery system

    NASA Astrophysics Data System (ADS)

    Yoshida, Y.; Fukui, S.; Fujimoto, S.; Mishima, F.; Takeda, S.; Izumi, Y.; Ohtani, S.; Fujitani, Y.; Nishijima, S.

    2007-03-01

    In conventional systemic drug delivery the drug is administered by intravenous injection; it then travels to the heart from where it is pumped to all regions of the body. When the drug is aimed at a small target region, this method is extremely inefficient and leads to require much larger doses than those being necessary. In order to overcome this problem a number of targeted drug delivery methods are developed. One of these, magnetically targeted drug delivery system (MT-DDS) will be a promising way, which involves binding a drug to small biocompatible magnetic particles, injecting these into the blood stream and using a high gradient magnetic field to pull them out of suspension in the target region. In the present paper, we describe an ex vivo experimental work. It is also reported that navigation and accumulation test of the magnetic particles in the Y-shaped glass tube was performed in order to examine the threshold of the magnetic force for accumulation. It is found that accumulation of the magnetic particles was succeeded in the blood vessel when a permanent magnet was placed at the vicinity of the blood vessel. This result indicates the feasibility of the magnetically drug targeting in the blood vessel.

  13. Carbon nanotubes buckypapers for potential transdermal drug delivery.

    PubMed

    Schwengber, Alex; Prado, Héctor J; Zilli, Darío A; Bonelli, Pablo R; Cukierman, Ana L

    2015-12-01

    Drug loaded buckypapers based on different types of carbon nanotubes (CNTs) were prepared and characterized in order to evaluate their potentialities for the design of novel transdermal drug delivery systems. Lab-synthesized CNTs as well as commercial samples were employed. Clonidine hydrochloride was used as model drug, and the influence of composition of the drug loaded buckypapers and processing variables on in vitro release profiles was investigated. To examine the influence of the drug nature the evaluation was further extended to buckypapers prepared with flurbiprofen and one type of CNTs, their selection being based on the results obtained with the former drug. Scanning electronic microscopy images indicated that the model drugs were finely dispersed on the CNTs. Differential scanning calorimetry, and X-ray diffraction pointed to an amorphous state of both drugs in the buckypapers. A higher degree of CNT-drug superficial interactions resulted in a slower release of the drug. These interactions were in turn affected by the type of CNTs employed (single wall or multiwall CNTs), their functionalization with hydroxyl or carboxyl groups, the chemical structure of the drug, and the CNT:drug mass ratio. Furthermore, the application of a second layer of drug free CNTs on the loaded buckypaper, led to decelerate the drug release and to reduce the burst effect.

  14. 1st meeting on topical drug delivery to the nail.

    PubMed

    Murdan, Sudaxshina

    2007-07-01

    The first ever symposium dedicated solely to drug delivery to the nail following topical application was held on the 2nd April 2007, in London, UK, organised by Dr Clive Roper (Charles River Laboratories, Scotland) and Dr Sudaxshina Murdan (School of Pharmacy, University of London, UK), under the auspices of Skin Forum. The 1-day meeting was attended by approximately 35 delegates from industry, academia and hospitals, and provided a much-needed forum for the presentation and discussion of research and problems in this emerging field. Topical drug delivery is especially suitable for onychomycosis (fungal infections of the nail plate and/or nail bed) and nail psoriasis, which affect 2 - 13 and 1 - 3% of the general population, respectively, and make up the bulk of nail disorders. Topical therapy would avoid the adverse events and drug interactions of systemic antifungal agents and the pain of injection when antipsoriatic agents are injected into affected nail folds. However, successful topical therapy is extremely challenging due to the very low permeability of the nail plate. Five speakers spoke about various aspects of topical drug delivery to the nail, including review of the nail plate structure, function, diseases, their existing therapies (systemic and topical), limitations and global sales. The need for effective topical drug delivery to the nail to overcome the problems associated with present treatment, and the fact that there are few topical formulations available for the treatment of nail fungal infections and psoriasis, and the even fewer effective formulations, was highlighted.

  15. Biocompatibility of Chitosan Carriers with Application in Drug Delivery

    PubMed Central

    Rodrigues, Susana; Dionísio, Marita; Remuñán López, Carmen; Grenha, Ana

    2012-01-01

    Chitosan is one of the most used polysaccharides in the design of drug delivery strategies for administration of either biomacromolecules or low molecular weight drugs. For these purposes, it is frequently used as matrix forming material in both nano and micron-sized particles. In addition to its interesting physicochemical and biopharmaceutical properties, which include high mucoadhesion and a great capacity to produce drug delivery systems, ensuring the biocompatibility of the drug delivery vehicles is a highly relevant issue. Nevertheless, this subject is not addressed as frequently as desired and even though the application of chitosan carriers has been widely explored, the demonstration of systems biocompatibility is still in its infancy. In this review, addressing the biocompatibility of chitosan carriers with application in drug delivery is discussed and the methods used in vitro and in vivo, exploring the effect of different variables, are described. We further provide a discussion on the pros and cons of used methodologies, as well as on the difficulties arising from the absence of standardization of procedures. PMID:24955636

  16. Interpenetrating Polymer Networks as Innovative Drug Delivery Systems

    PubMed Central

    Lohani, Alka; Singh, Garima; Bhattacharya, Shiv Sankar; Verma, Anurag

    2014-01-01

    Polymers have always been valuable excipients in conventional dosage forms, also have shown excellent performance into the parenteral arena, and are now capable of offering advanced and sophisticated functions such as controlled drug release and drug targeting. Advances in polymer science have led to the development of several novel drug delivery systems. Interpenetrating polymer networks (IPNs) have shown superior performances over the conventional individual polymers and, consequently, the ranges of applications have grown rapidly for such class of materials. The advanced properties of IPNs like swelling capacity, stability, biocompatibility, nontoxicity and biodegradability have attracted considerable attention in pharmaceutical field especially in delivering bioactive molecules to the target site. In the past few years various research reports on the IPN based delivery systems showed that these carriers have emerged as a novel carrier in controlled drug delivery. The present review encompasses IPNs, their types, method of synthesis, factors which affects the morphology of IPNs, extensively studied IPN based drug delivery systems, and some natural polymers widely used for IPNs. PMID:24949205

  17. Characterization of Release Mechanism in Polymeric Drug Delivery Systems

    NASA Astrophysics Data System (ADS)

    Laplante, Arthur James; Plachy, Robin Marie; Aou, Kaoru; Ferguson, Jake; Hsu, Shaw Ling

    2006-03-01

    Our polymeric drug delivery system is based on our understanding of phase behavior of polymers [e.g poly(lactic acid)], low molecular drugs and various solvents used in processing. Clearly the different morphologies achieved, based on different phase separation kinetics, can affect drug release rates. Release of drugs, in most cases, involves the exchange between the extraction media and drug. We have characterized the transport behavior using a number of unique techniques. Reflectance infrared spectroscopy has given us a detailed description of the release rate of drugs into the extraction media. Surface plasmon resonance has shown the overall mass loss. UV-visible spectroscopy has yielded the concentration of drug in the solution. These measurements are compared to the release mechanism based on Fickian diffusion. The two step release rates observed can only be explained by taking into account differences in the morphological features of the phase separated films.

  18. Engineering mesenchymal stem cells for regenerative medicine and drug delivery.

    PubMed

    Park, Ji Sun; Suryaprakash, Smruthi; Lao, Yeh-Hsing; Leong, Kam W

    2015-08-01

    Researchers have applied mesenchymal stem cells (MSC) to a variety of therapeutic scenarios by harnessing their multipotent, regenerative, and immunosuppressive properties with tropisms toward inflamed, hypoxic, and cancerous sites. Although MSC-based therapies have been shown to be safe and effective to a certain degree, the efficacy remains low in most cases when MSC are applied alone. To enhance their therapeutic efficacy, researchers have equipped MSC with targeted delivery functions using genetic engineering, therapeutic agent incorporation, and cell surface modification. MSC can be genetically modified virally or non-virally to overexpress therapeutic proteins that complement their innate properties. MSC can also be primed with non-peptidic drugs or magnetic nanoparticles for enhanced efficacy and externally regulated targeting, respectively. Furthermore, MSC can be functionalized with targeting moieties to augment their homing toward therapeutic sites using enzymatic modification, chemical conjugation, or non-covalent interactions. These engineering techniques are still works in progress, requiring optimization to improve the therapeutic efficacy and targeting effectiveness while minimizing any loss of MSC function. In this review, we will highlight the advanced techniques of engineering MSC, describe their promise and the challenges of translation into clinical settings, and suggest future perspectives on realizing their full potential for MSC-based therapy.

  19. Engineering Mesenchymal Stem Cells for Regenerative Medicine and Drug Delivery

    PubMed Central

    Park, Ji Sun; Suryaprakash, Smruthi; Lao, Yeh-Hsing; Leong, Kam W.

    2015-01-01

    Researchers have applied mesenchymal stem cells (MSC) to a variety of therapeutic scenarios by harnessing their multipotent, regenerative, and immunosuppressive properties with tropisms toward inflamed, hypoxic, and cancerous sites. Although MSC-based therapies have been shown to be safe and effective to a certain degree, the efficacy remains low in most cases when MSC are applied alone. To enhance their therapeutic efficacy, researchers have equipped MSC with targeted delivery functions using genetic engineering, therapeutic agent incorporation, and cell surface modification. MSC can be genetically modified virally or non-virally to overexpress therapeutic proteins that complement their innate properties. MSC can also be primed with non-peptidic drugs or magnetic nanoparticles for enhanced efficacy and externally regulated targeting, respectively. Furthermore, MSC can be functionalized with targeting moieties to augment their homing toward therapeutic sites using enzymatic modification, chemical conjugation, or non-covalent interactions. These engineering techniques are still works in progress, requiring optimization to improve the therapeutic efficacy and targeting effectiveness while minimizing any loss of MSC function. In this review, we will highlight the advanced techniques of engineering MSC, describe their promise and the challenges of translation into clinical settings, and suggest future perspectives on realizing their full potential for MSC-based therapy. PMID:25770356

  20. Biodegradable nanoparticles for sustained occular drug delivery

    NASA Astrophysics Data System (ADS)

    Cleroux, Carolyne

    Apoptosis (programmed cell-death) is a common final pathway through which cells die in retinal degenerative diseases. The purpose of this project was to develop biodegradable nanoparticles that quickly deliver XIAP, an inhibitor of apoptosis, to retinal cells following acute insults. In vitro protein release profiles from different formulations were established, and two cell types were incubated with nanoparticles to assess cellular uptake. Subretinal injections were carried out in rats to assess in vivo localization and possible toxicity. In vitro studies showed an initial burst of protein followed by sustained release, with overall low levels of protein release. Cell culture experiments suggest that particles are mostly membrane-bound, and some may be internalized. In vivo experiments revealed no signs of toxicity, and protein localized within the photoreceptor layer. In conclusion, nanoparticles may provide a good delivery system for XIAP; however higher levels of protein re